The Company Approach to Software Engineering Project Courses

ERIC Educational Resources Information Center

Broman, D.; Sandahl, K.; Abu Baker, M.

2012-01-01

Teaching larger software engineering project courses at the end of a computing curriculum is a way for students to learn some aspects of real-world jobs in industry. Such courses, often referred to as capstone courses, are effective for learning how to apply the skills they have acquired in, for example, design, test, and configuration management.…

Computer-Aided Engineering Education at the K.U. Leuven.

ERIC Educational Resources Information Center

Snoeys, R.; Gobin, R.

1987-01-01

Describes some recent initiatives and developments in the computer-aided design program in the engineering faculty of the Katholieke Universiteit Leuven (Belgium). Provides a survey of the engineering curriculum, the computer facilities, and the main software packages available. (TW)

Teaching practice and effect of the curriculum design and simulation courses under the support of professional optical software

NASA Astrophysics Data System (ADS)

Lin, YuanFang; Zheng, XiaoDong; Huang, YuJia

2017-08-01

Curriculum design and simulation courses are bridges to connect specialty theories, engineering practice and experimental skills. In order to help students to have the computer aided optical system design ability adapting to developments of the times, a professional optical software-Advanced System of Analysis Program (ASAP) was used in the research teaching of curriculum design and simulation courses. The ASAP tutorials conducting, exercises both complementing and supplementing the lectures, hands-on practice in class, autonomous learning and independent design after class were bridged organically, to guide students "learning while doing, learning by doing", paying more attention to the process instead of the results. Several years of teaching practice of curriculum design and simulation courses shows that, project-based learning meets society needs of training personnel with knowledge, ability and quality. Students have obtained not only skills of using professional software, but also skills of finding and proposing questions in engineering practice, the scientific method of analyzing and solving questions with specialty knowledge, in addition, autonomous learning ability, teamwork spirit and innovation consciousness, still scientific attitude of facing failure and scientific spirit of admitting deficiency in the process of independent design and exploration.

A curriculum for real-time computer and control systems engineering

NASA Technical Reports Server (NTRS)

Halang, Wolfgang A.

1990-01-01

An outline of a syllabus for the education of real-time-systems engineers is given. This comprises the treatment of basic concepts, real-time software engineering, and programming in high-level real-time languages, real-time operating systems with special emphasis on such topics as task scheduling, hardware architectures, and especially distributed automation structures, process interfacing, system reliability and fault-tolerance, and integrated project development support systems. Accompanying course material and laboratory work are outlined, and suggestions for establishing a laboratory with advanced, but low-cost, hardware and software are provided. How the curriculum can be extended into a second semester is discussed, and areas for possible graduate research are listed. The suitable selection of a high-level real-time language and supporting operating system for teaching purposes is considered.

Enhancing the Undergraduate Computing Experience in Chemical Engineering CACHE Corporation

ERIC Educational Resources Information Center

Edgar, Thomas F.

2006-01-01

This white paper focuses on the integration and enhancement of the computing experience for undergraduates throughout the chemical engineering curriculum. The computing experience for undergraduates in chemical engineering should have continuity and be coordinated from course to course, because a single software solution is difficult to achieve in…

3-D Geometric Modeling for the 21st Century.

ERIC Educational Resources Information Center

Ault, Holly K.

1999-01-01

Describes new geometric computer models used in contemporary computer-aided design (CAD) software including wire frame, surface, solid, and parametric models. Reviews their use in engineering design and discusses the impact of these new technologies on the engineering design graphics curriculum. (Author/CCM)

A Design Quality Learning Unit in OO Modeling Bridging the Engineer and the Artist

ERIC Educational Resources Information Center

Waguespack, Leslie J.

2015-01-01

Recent IS curriculum guidelines compress software development pedagogy into smaller and smaller pockets of course syllabi. Where undergraduate IS students once may have practiced modeling in analysis, design, and implementation across six or more courses in a curriculum using a variety of languages and tools they commonly now experience modeling…

Business Technology Education in the Early 21st Century: The Ongoing Quest for Relevance

ERIC Educational Resources Information Center

Andriole, Stephen J.

2006-01-01

The field of information technology is changing and those responsible for educating the next generation of technology professionals have responded with a new computing curriculum, which identifies five distinct technology majors: computer engineering, computer science, software engineering, information systems and information technology.…

Fostering Soft Skills in Project-Oriented Learning within an Agile Atmosphere

ERIC Educational Resources Information Center

Chassidim, Hadas; Almog, Dani; Mark, Shlomo

2018-01-01

The project-oriented and Agile approaches have motivated a new generation of software engineers. Within the academic curriculum, the issue of whether students are being sufficiently prepared for the future has been raised. The objective of this work is to present the project-oriented environment as an influential factor that software engineering…

From Numerical Problem Solving to Model-Based Experimentation Incorporating Computer-Based Tools of Various Scales into the ChE Curriculum

ERIC Educational Resources Information Center

Shacham, Mordechai; Cutlip, Michael B.; Brauner, Neima

2009-01-01

A continuing challenge to the undergraduate chemical engineering curriculum is the time-effective incorporation and use of computer-based tools throughout the educational program. Computing skills in academia and industry require some proficiency in programming and effective use of software packages for solving 1) single-model, single-algorithm…

Virtual Power Electronics: Novel Software Tools for Design, Modeling and Education

NASA Astrophysics Data System (ADS)

Hamar, Janos; Nagy, István; Funato, Hirohito; Ogasawara, Satoshi; Dranga, Octavian; Nishida, Yasuyuki

The current paper is dedicated to present browser-based multimedia-rich software tools and e-learning curriculum to support the design and modeling process of power electronics circuits and to explain sometimes rather sophisticated phenomena. Two projects will be discussed. The so-called Inetele project is financed by the Leonardo da Vinci program of the European Union (EU). It is a collaborative project between numerous EU universities and institutes to develop state-of-the art curriculum in Electrical Engineering. Another cooperative project with participation of Japanese, European and Australian institutes focuses especially on developing e-learning curriculum, interactive design and modeling tools, furthermore on development of a virtual laboratory. Snapshots from these two projects will be presented.

The Chemical Engineer's Toolbox: A Glass Box Approach to Numerical Problem Solving

ERIC Educational Resources Information Center

Coronell, Daniel G.; Hariri, M. Hossein

2009-01-01

Computer programming in undergraduate engineering education all too often begins and ends with the freshman programming course. Improvements in computer technology and curriculum revision have improved this situation, but often at the expense of the students' learning due to the use of commercial "black box" software. This paper describes the…

Training in software used by practising engineers should be included in university curricula

NASA Astrophysics Data System (ADS)

Silveira, A.; Perdigones, A.; García, J. L.

2009-04-01

Deally, an engineering education should prepare students, i.e., emerging engineers, to use problem-solving processes that synergistically combine creativity and imagination with rigour and discipline. Recently, pressures on curricula have resulted in the development of software-specific courses, often to the detriment of the understanding of theory [1]. However, it is also true that there is a demand for information technology courses by students other than computer science majors [2]. The emphasis on training engineers may be best placed on answering the needs of industry; indeed, many proposals are now being made to try to reduce the gap between the educational and industrial communities [3]. Training in the use of certain computer programs may be one way of better preparing engineering undergraduates for eventual employment in industry. However, industry's needs in this respect must first be known. The aim of this work was to determine which computer programs are used by practising agricultural engineers with the aim of incorporating training in their use into our department's teaching curriculum. The results showed that 72% of their working hours involved the use computer programs. The software packages most commonly used were Microsoft Office (used by 79% of respondents) and CAD (56%), as well as budgeting (27%), statistical (21%), engineering (15%) and GIS (13%) programs. As a result of this survey our university department opened an additional computer suite in order to provide students practical experience in the use of Microsoft Excel, budgeting and engineering software. The results of this survey underline the importance of computer software training in this and perhaps other fields of engineering. [1] D. J. Moore, and D. R. Voltmer, "Curriculum for an engineering renaissance," IEEE Trans. Educ., vol. 46, pp. 452-455, Nov. 2003. [2] N. Kock, R. Aiken, and C. Sandas, "Using complex IT in specific domains: developing and assessing a course for nonmajors," IEEE Trans. Educ., vol. 45, pp. 50- 56, Feb. 2002. [3] I. Vélez, and J. F. Sevillano, "A course to train digital hardware designers for industry," IEEE Trans. Educ., vol. 50, pp. 236-243, Aug. 2007. Acknowledgement: This work was supported in part by the Universidad Politécnica de Madrid, Spain.

Exploration on teaching reform of theory curriculum for engineering specialties

NASA Astrophysics Data System (ADS)

Zhang, Yan; Shen, Wei-min; Shen, Chang-yu; Li, Chen-xia; Jing, Xu-feng; Lou, Jun; Shi, Yan; Jin, Shang-zhong

2017-08-01

The orientation of talents cultivation for local colleges is to train engineering application-oriented talents, so the exploration and practice on teaching reform of theory curriculum was carried out. We restructured the knowledge units basing on numerical solution problems, and chose the software to build algorithm models for improving the analytical and designed ability. Relying on micro video lessons platform, the teacher-student interaction was expanded from class to outside. Also, we programmed new experimental homework, which was suited for process evaluation. The new teaching mode has achieved good effect, and the students' application ability was significantly improved.

Status of the Body of Knowledge and Curriculum to Advance Systems Engineering (BKCASE (trademark)) Project

DTIC Science & Technology

2011-10-01

Systems engineer- ing knowledge has also been documented through the standards bodies, most notably : • ISO /IEC/IEEE 15288, Systems Engineer- ing...System Life Cycle Processes, 2008 (see [10]). • ANSI/EIA 632, Processes for Engineering a System, (1998) • IEEE 1220, ISO /IEC 26702 Application...tion • United States Defense Acquisition Guidebook, Chapter 4, June 27, 2011 • IEEE/EIA 12207 , Software Life Cycle Processes, 2008 • United

Undergraduate Research Opportunities in OSS

NASA Astrophysics Data System (ADS)

Boldyreff, Cornelia; Capiluppi, Andrea; Knowles, Thomas; Munro, James

Using Open Source Software (OSS) in undergraduate teaching in universities is now commonplace. Students use OSS applications and systems in their courses on programming, operating systems, DBMS, web development to name but a few. Studying OSS projects from both a product and a process view also forms part of the software engineering curriculum at various universities. Many students have taken part in OSS projects as well as developers.

ReProTool Version 2.0: Re-Engineering Academic Curriculum Using Learning Outcomes, ECTS and Bologna Process Concepts

ERIC Educational Resources Information Center

Pouyioutas, Philippos; Gjermundrod, Harald; Dionysiou, Ioanna

2012-01-01

Purpose: The purpose of this paper is to present ReProTool Version 2.0, a software tool that is used for the European Credit Transfer System (ECTS) and the Bologna Process re-engineering of academic programmes. The tool is the result of an 18 months project (February 2012-July 2013) project, co-financed by the European Regional Development Fund…

Fostering soft skills in project-oriented learning within an agile atmosphere

NASA Astrophysics Data System (ADS)

Chassidim, Hadas; Almog, Dani; Mark, Shlomo

2018-07-01

The project-oriented and Agile approaches have motivated a new generation of software engineers. Within the academic curriculum, the issue of whether students are being sufficiently prepared for the future has been raised. The objective of this work is to present the project-oriented environment as an influential factor that software engineering profession requires, using the second year course 'Software Development and Management in Agile Approach' as a case-study. This course combines academic topics, self-learned and soft skills implementation, the call for creativity, and the recognition of updated technologies and dynamic circumstances. The results of a survey that evaluated the perceived value of the course showed that the highest contribution of our environment was in the effectiveness of the team-work and the overall development process of the project.

Real-time development of data acquisition and analysis software for hands-on physiology education in neuroscience: G-PRIME.

PubMed

Lott, Gus K; Johnson, Bruce R; Bonow, Robert H; Land, Bruce R; Hoy, Ronald R

2009-01-01

We report on the real-time creation of an application for hands-on neurophysiology in an advanced undergraduate teaching laboratory. Enabled by the rapid software development tools included in the Matlab technical computing environment (The Mathworks, Natick, MA), a team, consisting of a neurophysiology educator and a biophysicist trained as an electrical engineer, interfaced to a course of approximately 15 students from engineering and biology backgrounds. The result is the powerful freeware data acquisition and analysis environment, "g-PRIME." The software was developed from week to week in response to curriculum demands, and student feedback. The program evolved from a simple software oscilloscope, enabling RC circuit analysis, to a suite of tools supporting analysis of neuronal excitability and synaptic transmission analysis in invertebrate model systems. The program has subsequently expanded in application to university courses, research, and high school projects in the US and abroad as free courseware.

Machine Tool Software

NASA Technical Reports Server (NTRS)

1988-01-01

A NASA-developed software package has played a part in technical education of students who major in Mechanical Engineering Technology at William Rainey Harper College. Professor Hack has been using (APT) Automatically Programmed Tool Software since 1969 in his CAD/CAM Computer Aided Design and Manufacturing curriculum. Professor Hack teaches the use of APT programming languages for control of metal cutting machines. Machine tool instructions are geometry definitions written in APT Language to constitute a "part program." The part program is processed by the machine tool. CAD/CAM students go from writing a program to cutting steel in the course of a semester.

Development of a Competency Mapping Tool for Undergraduate Professional Degree Programmes, Using Mechanical Engineering as a Case Study

ERIC Educational Resources Information Center

Holmes, David W.; Sheehan, Madoc; Birks, Melanie; Smithson, John

2018-01-01

Mapping the curriculum of a professional degree to the associated competency standard ensures graduates have the competence to perform as professionals. Existing approaches to competence mapping vary greatly in depth, complexity, and effectiveness, and a standardised approach remains elusive. This paper describes a new mapping software tool that…

Using Dynamic Geometry and Computer Algebra Systems in Problem Based Courses for Future Engineers

ERIC Educational Resources Information Center

Tomiczková, Svetlana; Lávicka, Miroslav

2015-01-01

It is a modern trend today when formulating the curriculum of a geometric course at the technical universities to start from a real-life problem originated in technical praxis and subsequently to define which geometric theories and which skills are necessary for its solving. Nowadays, interactive and dynamic geometry software plays a more and more…

Integration of a CAS/DGS as a CAD System in the Mathematics Curriculum for Architecture Students

ERIC Educational Resources Information Center

Falcon, R. M.

2011-01-01

Students of Architecture and Building Engineering Degrees work with Computer Aided Design systems daily in order to design and model architectonic constructions. Since this kind of software is based on the creation and transformation of geometrical objects, it seems to be a useful tool in Maths classes in order to capture the attention of the…

Ada (Trademark) Training Curriculum. Software Engineering Methodologies M201 Teacher’s Guide. Volume 3.

DTIC Science & Technology

1986-01-01

TRAINING CURRICULUM SOFTWARE 3/5’ENGNEERNG ETHODOLOGES 281 TEACHER’S GUIDE VOLMEU SOTC N TA A 96DA0 -3CK L(U) S F TECH INC ALTHAM MA 1986 DAAB9?-83-C...La. V)W V 0 W Wx ci >A. I- 8 0 x I- W L) 0 Z I- c 0.-ZW (n .w (x a. CLV 4 WZ0 o 0 W 1r 0 X 0 ZwI La. a) >1 0 ZU z W IA. 0 w W .... WW I 14-4D - Z 0 x...WWO= z (a~ I-- (i " c w m cal x Z w WW0.WW= woC-0ww cc Q z = lW"x w’-4ww 0 X=.-U ==L~lIl Ca- LUw w C. wow m ).i~ -4,C I -s-0. s- zwi LU -4 LU 0 LU W

Developing Engineering and Science Process Skills Using Design Software in an Elementary Education

NASA Astrophysics Data System (ADS)

Fusco, Christopher

This paper examines the development of process skills through an engineering design approach to instruction in an elementary lesson that combines Science, Technology, Engineering, and Math (STEM). The study took place with 25 fifth graders in a public, suburban school district. Students worked in groups of five to design and construct model bridges based on research involving bridge building design software. The assessment was framed around individual student success as well as overall group processing skills. These skills were assessed through an engineering design packet rubric (student work), student surveys of learning gains, observation field notes, and pre- and post-assessment data. The results indicate that students can successfully utilize design software to inform constructions of model bridges, develop science process skills through problem based learning, and understand academic concepts through a design project. The final result of this study shows that design engineering is effective for developing cooperative learning skills. The study suggests that an engineering program offered as an elective or as part of the mandatory curriculum could be beneficial for developing students' critical thinking, inter- and intra-personal skills, along with an increased their understanding and awareness for scientific phenomena. In conclusion, combining a design approach to instruction with STEM can increase efficiency in these areas, generate meaningful learning, and influence student attitudes throughout their education.

Software Engineering Education.

DTIC Science & Technology

1987-05-01

A-D-AI82bN3 JO U4WR El 14N NWRC j MCA! CIo~~l-MN~J02Ua~ 1/1 NYSI/ EI- -TR- SWT -8 -L U NCLA SSI F IED PAYF/G L2/5 MI. 1.0I2 W 136 2’ UN,, - mll I m...tghteeight aurriuls . empae ta t i ohe An additional refinement of the curriculum content can bem aterial taught m ight also be taught in co urses w hose a...descriptions of possible courses. Bloo -. [Bioom56] has defined a taxonomy of educational Software System Clsae. Several different classes can obe

Patterns of Interaction and Mathematical Thinking of High School Students in Classroom Environments That Include Use of Java-Based, Curriculum-Embedded Software

ERIC Educational Resources Information Center

Fonkert, Karen L.

2012-01-01

This study analyzes the nature of student interaction and discourse in an environment that includes the use of Java-based, curriculum-embedded mathematical software. The software "CPMP-Tools" was designed as part of the development of the second edition of the "Core-Plus Mathematics" curriculum. The use of the software on…

Engineering the curriculum: Towards an adaptive curriculum

NASA Astrophysics Data System (ADS)

Johns-Boast, Lynette Frances

The curriculum is one of the most important artefacts produced by higher education institutions, yet it is one of the least studied. Additionally, little is known about the decision-making of academics when designing and developing their curricula, nor how they make use of them. This research investigates how 22 Australian higher education engineering, software engineering, computer science, and information systems academics conceive of curriculum, what approaches they take when designing, and developing course and program curricula, and what use they make of the curriculum. It also considers the implications of these conceptions and behaviour upon their curricula. Data were collected through a series of one-to-one, in-depth, qualitative interviews as well as small focus group sessions and were analysed following Charmaz’ (2006) approach to grounded theory. In this thesis, I argue that the development of curricula for new higher degree programs and courses and / or the updating and innovating of an existing curriculum is a design problem. I also argue that curriculum is a complex adaptive system. Surrounding the design and development of a curriculum is a process of design that leads to the creation of a designed object - the official-curriculum. The official-curriculum provides the guiding principles for its implementation, which involves the design and development of the curriculum-in-use, its delivery, and evaluation. Data show that while the participants conceive of curriculum as a problem of design involving a design process leading to the development of the official-curriculum, surprisingly, their behaviour does not match their conceptions. Over a very short period, their behaviour leads to a process I have called curriculum drift where the official-curriculum and the curriculum-in-use drift away from each other causing the curriculum to lose its integrity. Curricular integrity is characterised through the attributes of alignment, coherence, and cohesiveness. Without integrity, a curriculum is unlikely to be able to deliver all its required outcomes. Utilising the concepts of system dynamics and systems thinking I propose that not only is the curriculum a complex adaptive system, it is a multi-dimensional object. Adopting this notion facilitates possible interventions that may be used to monitor the curriculum and to moderate the effects of curriculum drift. I argue that using the articulated purpose of the curriculum to determine the desired outcomes of that curriculum will enhance curricular alignment, leading to improved student learning and outcomes. Furthermore, perceiving the curriculum as a multi-dimensional object reinforces the proposition that aligning the purpose and desired outcomes of each course with those of the program will achieve improved desired outcomes from the program as a whole. The original contributions to knowledge arising from this research are curriculum drift, an enhanced approach to the curricular alignment, and a multi-dimensional view of curriculum. Perhaps the most important implication of this research, is insight into how we might incorporate curriculum drift into curriculum review models. Successful incorporation has the potential to deliver increased quality of educational outcomes by enabling innovation whilst maintaining the integrity of the curriculum.

Developing a New Industrial Engineering Curriculum Using a Systems Engineering Approach

ERIC Educational Resources Information Center

Buyurgan, Nebil; Kiassat, Corey

2017-01-01

This paper reports on the development of an engineering curriculum for a new industrial engineering programme at a medium-sized private university in the northeast United States. A systems engineering process has been followed to design and develop the new curriculum. Considering the programme curriculum as a system, first the stakeholders have…

NEWS: Design and creativity

NASA Astrophysics Data System (ADS)

2000-03-01

Delcam, a manufacturing software developer, has supplied substantial funding towards a UK Government initiative intended to revolutionize the study of design and technology in schools. The computer-aided design software for schools (CAD-CAM) programme will give students a bridge into industry by enabling them to employ video links with engineers at companies such as British Aerospace and Rolls Royce. They will then be able to convert their virtual reality designs into a finished product. When the revised National Curriculum comes into effect this year, CAD-CAM will become compulsory from Key Stage 3, reflecting the greater focus on work-related learning, as well as the added importance being given to Information and Communications Technology (ICT) within the curriculum. Under the new scheme, schools can use a range of software designed in the UK (currently used for such items as jet aircraft and Formula One racing cars), which is being made available free of charge. The Design and Technology Association is monitoring the programme and the schools taking part have had to propose targets, focused on curriculum innovation, pupil outcomes and staff development. Still on the theme of design is the `Young Foresight' project launched in January and inviting 13 to 14 year-olds to tackle the challenges of the future through designing a new product for the world of 2020. The aim here is to encourage creativity, enterprise and innovation among young people by giving them an idea of what is involved in the design and development of a successful product. The students will be supported by mentors drawn from the local business community and there will be related BBC schools television programmes early in March with classroom resources, teacher training and an interactive website. The first phase of the initiative, based on 100 schools from across England and Wales, should be completed by autumn 2000, with phase 2 for 3000 schools over a three-year period incorporating a further nine programmes reflecting the work of the national Foresight Panels. The national Foresight programme is about preparing for the future by identifying market drivers, threats and opportunities and using that knowledge to inform the decisions that need to be taken today. Details can be viewed at www.foresight.gov.uk And for those with any remaining untapped ingenuity, the deadline is fast approaching for this year's `Young Engineer for Britain' competition. Young people, either individually or in teams of up to four, are invited to demonstrate their engineering skills in an event with a total prize value of over £65 000. The individual winner takes away a personal prize of £2500 plus a trophy, and their school receives an additional £2500 for engineering teaching equipment. Entry details can be obtained from Young Engineers for Britain, Engineering Council, 10 Maltravers Street, London WC2R 3ER and the closing date is 28 April 2000 .

Utilizing Civil Engineering Senior Design Capstone Projects to Evaluate Students' Sustainability Education across Engineering Curriculum

ERIC Educational Resources Information Center

Dancz, Claire L. A.; Ketchman, Kevin J.; Burke, Rebekah D.; Hottle, Troy A.; Parrish, Kristen; Bilec, Melissa M.; Landis, Amy E.

2017-01-01

While many institutions express interest in integrating sustainability into their civil engineering curriculum, the engineering community lacks consensus on established methods for infusing sustainability into curriculum and verified approaches to assess engineers' sustainability knowledge. This paper presents the development of a sustainability…

Software Assurance Curriculum Project Volume 2: Undergraduate Course Outlines

DTIC Science & Technology

2010-08-01

Contents Acknowledgments iii Abstract v 1 An Undergraduate Curriculum Focus on Software Assurance 1 2 Computer Science I 7 3 Computer Science II...confidence that can be integrated into traditional software development and acquisition process models . Thus, in addition to a technology focus...testing throughout the software development life cycle ( SDLC ) AP Security and complexity—system development challenges: security failures

Medical imaging education in biomedical engineering curriculum: courseware development and application through a hybrid teaching model.

PubMed

Zhao, Weizhao; Li, Xiping; Chen, Hairong; Manns, Fabrice

2012-01-01

Medical Imaging is a key training component in Biomedical Engineering programs. Medical imaging education is interdisciplinary training, involving physics, mathematics, chemistry, electrical engineering, computer engineering, and applications in biology and medicine. Seeking an efficient teaching method for instructors and an effective learning environment for students has long been a goal for medical imaging education. By the support of NSF grants, we developed the medical imaging teaching software (MITS) and associated dynamic assessment tracking system (DATS). The MITS/DATS system has been applied to junior and senior medical imaging classes through a hybrid teaching model. The results show that student's learning gain improved, particularly in concept understanding and simulation project completion. The results also indicate disparities in subjective perception between junior and senior classes. Three institutions are collaborating to expand the courseware system and plan to apply it to different class settings.

Development of a competency mapping tool for undergraduate professional degree programmes, using mechanical engineering as a case study

NASA Astrophysics Data System (ADS)

Holmes, David W.; Sheehan, Madoc; Birks, Melanie; Smithson, John

2018-01-01

Mapping the curriculum of a professional degree to the associated competency standard ensures graduates have the competence to perform as professionals. Existing approaches to competence mapping vary greatly in depth, complexity, and effectiveness, and a standardised approach remains elusive. This paper describes a new mapping software tool that streamlines and standardises the competency mapping process. The available analytics facilitate ongoing programme review, management, and accreditation. The complete mapping and analysis of an Australian mechanical engineering degree programme is described as a case study. Each subject is mapped by evaluating the amount and depth of competence development present. Combining subject results then enables highly detailed programme level analysis. The mapping process is designed to be administratively light, with aspects of professional development embedded in the software. The effective competence mapping described in this paper enables quantification of learning within a professional degree programme, and provides a mechanism for holistic programme improvement.

Integration of a CAS/DGS as a CAD system in the mathematics curriculum for architecture students

NASA Astrophysics Data System (ADS)

Falcón, R. M.

2011-09-01

Students of Architecture and Building Engineering Degrees work with Computer Aided Design systems daily in order to design and model architectonic constructions. Since this kind of software is based on the creation and transformation of geometrical objects, it seems to be a useful tool in Maths classes in order to capture the attention of the students. However, users of these systems cannot display the set of formulas and equations which constitute the basis of their studio. Moreover, if they want to represent curves or surfaces starting from its corresponding equations, they have to define specific macros which require the knowledge of some computer language or they have to create a table of points in order to convert a set of nodes into polylines, polysolids or splines. More specific concepts, like, for instance, those related to differential geometry, are not implemented in this kind of software, although they are taught in our Maths classes. In a very similar virtual environment, Computer Algebra and Dynamic Geometry Systems offer the possibility of implementing several concepts which can be found in the usual mathematics curriculum for Building Engineering: curves, surfaces and calculus. Specifically, the use of sliders related to the Euler's angles and the generation of tools which project 3D into 2D, facilitate the design and model of curves and rigid objects in space, by starting from their parametric equations. In this article, we show the experience carried out in an experimental and control group in the context of the Maths classes of the Building Engineering Degree of the University of Seville, where students have created their own building models by understanding and testing the usefulness of the mathematical concepts.

Active Learning through Modeling: Introduction to Software Development in the Business Curriculum

ERIC Educational Resources Information Center

Roussev, Boris; Rousseva, Yvonna

2004-01-01

Modern software practices call for the active involvement of business people in the software process. Therefore, programming has become an indispensable part of the information systems component of the core curriculum at business schools. In this paper, we present a model-based approach to teaching introduction to programming to general business…

Future of Chemical Engineering: Integrating Biology into the Undergraduate ChE Curriculum

ERIC Educational Resources Information Center

Mosto, Patricia; Savelski, Mariano; Farrell, Stephanie H.; Hecht, Gregory B.

2007-01-01

Integrating biology in the chemical engineering curriculum seems to be the future for chemical engineering programs nation and worldwide. Rowan University's efforts to address this need include a unique chemical engineering curriculum with an intensive biology component integrated throughout from freshman to senior years. Freshman and Sophomore…

Development and operation of a mobile test facility for education

NASA Astrophysics Data System (ADS)

Davis, Christopher T.

The automotive industry saw a large shift towards vehicle electrification after the turn of the century. It became necessary to ensure that new and existing engineers were qualified to design and calibrate these new systems. To ensure this training, Michigan Tech received a grant to develop a curriculum based around vehicle electrification. As part of this agenda, the Michigan Tech Mobile Laboratory was developed to provide hands-on training for professional engineers and technicians in hybrid electric vehicles and vehicle electrification. The Mobile Lab has since then increased the scope of the delivered curriculum to include other automotive areas and even customizable course content to meet specific needs. This thesis outlines the development of the Mobile Laboratory and its powertrain test facilities. The focus of this thesis is to discuss the different hardware and software systems within the lab and test cells. Detailed instructions on the operation and maintenance of each of the systems are discussed. In addition, this thesis outlines the setup and operation of the necessary equipment for several of the experiments for the on and off campus courses and seminars.

Integrating Engineering into Delaware's K-5 Classrooms: A Study of Pedagogical and Curricular Resources

NASA Astrophysics Data System (ADS)

Grusenmeyer, Linda Huey

This study examines the personal and curricular resources available to Delaware's elementary teachers during a time of innovative curriculum change, i.e., their knowledge, goals and beliefs regarding elementary engineering curriculum and the pedagogical support to teach two Science and Engineering Practices provided by science teaching materials. Delaware was at the forefront of K-12 STEM movement, first to adopt statewide elementary curriculum materials to complement existing science units, and one of the first to adopt the new science standards--Next Generation Science Standards. What supports were available to teachers as they adapted and adopted this new curriculum? To investigate this question, I examined (1) teachers' beliefs about engineering and the engineering curriculum, and (2) the pedagogical supports available to teachers in selected science and engineering curriculum. Teachers' knowledge, goals, and beliefs regarding Delaware's adoption of new elementary engineering curriculum were surveyed using an adapted version of the Design, Engineering, and Technology Survey (Hong, Purser, & Gardella, 2011; Yaser, Baker, Carpius, Krauss, & Roberts, 2006). Also, three open ended questions sought to reveal deeper understanding of teacher knowledge and understanding of engineering; their concerns about personal and systemic resources related to the new curriculum, its logistics, and feasibility; and their beliefs about the potential positive impact presented by the engineering education initiative. Teacher concerns were analyzed using the Concerns-Based Adoption Model (Hall & Hord, 2010). Lay understandings of engineering were analyzed by contrasting naive representations of engineering with three key characteristics of engineering adapted from an earlier study (Capobianco Diefes-Dux, Mena, & Weller, 2011). Survey findings for teachers who had attended training and those who have not yet attended professional development in the new curriculum were compared with few notable differences. Almost all elementary teacher respondents were familiar with engineering and able to define it using one or more key characteristics. They valued the inclusion of engineering in the elementary curriculum; however trained and untrained teachers reported they were not confident about teaching it and were unaware of the new standards related to engineering. Teachers saw potential advantages or benefits of the new curriculum as helping improve science and math understanding, an opportunity to increase vocational awareness, and engaging students and motivating them to learn. Most teachers saw similar barriers to implementation- lack of teacher knowledge, lack of time to learn about engineering and how to teach engineering, and lack of administrative support. Almost all were open to additional in-service training to learn more about this new curriculum. Three fifth grade science units were examined for evidence of teacher pedagogical support in teaching two Science and Engineering Practices (SEP) advocated by the Next Generation Science Standards. An analytic framework was developed based upon two NGSS SEPs: Asking questions, defining problems and Engaging in argument from evidence. Findings revealed that the kits varied greatly in their pedagogical approaches to the two SEPs and differences might be explained by each kit's underlying orientations to the teaching-learning process. Findings from these investigations have implications for the design of professional development and for engineering curricula. They highlight the importance of considering teacher beliefs about curriculum implementation and subject matter, as well as the importance of creating curriculum materials that focus teacher attention toward student thinking and the language rich science and engineering practices. Recommendations also include ongoing professional development to allow teachers time to try out and revise pedagogical routines that support the SEPs studied here.

Engineering education in 21st century

NASA Astrophysics Data System (ADS)

Alam, Firoz; Sarkar, Rashid; La Brooy, Roger; Chowdhury, Harun

2016-07-01

The internationalization of engineering curricula and engineering practices has begun in Europe, Anglosphere (English speaking) nations and Asian emerging economies through the Bologna Process and International Engineering Alliance (Washington Accord). Both the Bologna Process and the Washington Accord have introduced standardized outcome based engineering competencies and frameworks for the attainment of these competencies by restructuring existing and undertaking some new measures for an intelligent adaptation of the engineering curriculum and pedagogy. Thus graduates with such standardized outcome based curriculum can move freely as professional engineers with mutual recognition within member nations. Despite having similar or near similar curriculum, Bangladeshi engineering graduates currently cannot get mutual recognition in nations of Washington Accord and the Bologna Process due to the non-compliance of outcome based curriculum and pedagogy. This paper emphasizes the steps that are required to undertake by the engineering educational institutions and the professional body in Bangladesh to make the engineering competencies, curriculum and pedagogy compliant to the global engineering alliance. Achieving such compliance will usher in a new era for the global mobility and global engagement by Bangladesh trained engineering graduates.

Active Learning in Introductory Climatology.

ERIC Educational Resources Information Center

Dewey, Kenneth F.; Meyer, Steven J.

2000-01-01

Introduces a software package available for the climatology curriculum that determines possible climatic events according to a long-term climate history. Describes the integration of the software into the curriculum and presents examples of active learning. (Contains 19 references.) (YDS)

Electromechanical Engineering Technology Curriculum.

ERIC Educational Resources Information Center

Georgia State Univ., Atlanta. Dept. of Vocational and Career Development.

This guide offers information and procedures necessary to train electromechanical engineering technicians. Discussed first are the rationale and objectives of the curriculum. The occupational field of electromechanical engineering technology is described. Next, a curriculum model is set forth that contains information on the standard…

Wind energy curriculum development at GWU

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsu, Stephen M

A wind energy curriculum has been developed at the George Washington University, School of Engineering and Applied Science. Surveys of student interest and potential employers expectations were conducted. Wind industry desires a combination of mechanical engineering training with electrical engineering training. The curriculum topics and syllabus were tested in several graduate/undergraduate elective courses. The developed curriculum was then submitted for consideration.

They Can't Spell "Engineering" but They Can Do It: Designing an Engineering Curriculum for the Preschool Classroom

ERIC Educational Resources Information Center

Davis, Martha E.; Cunningham, Christine M.; Lachapelle, Cathy P.

2017-01-01

Engineering is Elementary (EiE) is a curriculum project of the Museum of Science, Boston, that promotes and supports engineering literacy and educational equity for all children. Building on the success of its award-winning curriculum for grades 1-5, the team has recently turned its attention to Wee Engineer, a research-based engineering…

Associate Degree Curriculum for Engineering Technology.

ERIC Educational Resources Information Center

Campbell, Clifton P.

Presented is a two-year associate degree curriculum for Engineering Technology. Specializations are provided in civil, electronics, and mechanical technology. The civil engineering technology specialization facilitates three major areas of study, and mechanical technology includes design and production options. Each curriculum was designed to…

Mechanical Engineering Technology Curriculum.

ERIC Educational Resources Information Center

Georgia State Univ., Atlanta. Dept. of Vocational and Career Development.

This guide offers information and procedures necessary to train mechanical engineering technicians. Discussed first are the rationale and objectives of the curriculum. The occupational field of mechanical engineering technology is described. Next, a curriculum model is set forth that contains information on the standard mechanical engineering…

Software Assurance Curriculum Project Volume 1: Master of Software Assurance Reference Curriculum

DTIC Science & Technology

2010-08-01

activity by providing a check on the relevance and currency of the process used to develop the MSwA2010 curriculum content. Figure 2 is an expansion of...random oracle model, symmetric crypto primitives, modes of operations, asymmetric crypto primitives (Chapter 5) [16] Detailed design...encryption, public key encryption, digital signatures, message authentication codes, crypto protocols, cryptanalysis, and further detailed crypto

Developing a new industrial engineering curriculum using a systems engineering approach

NASA Astrophysics Data System (ADS)

Buyurgan, Nebil; Kiassat, Corey

2017-11-01

This paper reports on the development of an engineering curriculum for a new industrial engineering programme at a medium-sized private university in the northeast United States. A systems engineering process has been followed to design and develop the new curriculum. Considering the programme curriculum as a system, first the stakeholders have been identified, and some preliminary analysis on their needs and requirements has been conducted. Following that, the phases of conceptual design, preliminary design, and detailed design have been pursued during which different levels of validation, assessment, and evaluation processes have been utilised. In addition, a curriculum assessment and continuous improvement process have been developed to assess the curriculum and the courses frequently. The resulting curriculum is flexible, allowing the pursuit of accelerated graduate programmes, a second major, various minor options, and study-abroad; relevant, tailored to the needs of industry partners in the vicinity; and practical, providing hands-on education, resulting in employment-ready graduates.

Potentials for Spatial Geometry Curriculum Development with Three-Dimensional Dynamic Geometry Software in Lower Secondary Mathematics

ERIC Educational Resources Information Center

Miyazaki, Mikio; Kimiho, Chino; Katoh, Ryuhei; Arai, Hitoshi; Ogihara, Fumihiro; Oguchi, Yuichi; Morozumi, Tatsuo; Kon, Mayuko; Komatsu, Kotaro

2012-01-01

Three-dimensional dynamic geometry software has the power to enhance students' learning of spatial geometry. The purpose of this research is to clarify what potential using three-dimensional dynamic geometry software can offer us in terms of how to develop the spatial geometry curriculum in lower secondary schools. By focusing on the impacts the…

Humanitarian engineering in the engineering curriculum

NASA Astrophysics Data System (ADS)

Vandersteen, Jonathan Daniel James

There are many opportunities to use engineering skills to improve the conditions for marginalized communities, but our current engineering education praxis does not instruct on how engineering can be a force for human development. In a time of great inequality and exploitation, the desire to work with the impoverished is prevalent, and it has been proposed to adjust the engineering curriculum to include a larger focus on human needs. This proposed curriculum philosophy is called humanitarian engineering. Professional engineers have played an important role in the modern history of power, wealth, economic development, war, and industrialization; they have also contributed to infrastructure, sanitation, and energy sources necessary to meet human need. Engineers are currently at an important point in time when they must look back on their history in order to be more clear about how to move forward. The changing role of the engineer in history puts into context the call for a more balanced, community-centred engineering curriculum. Qualitative, phenomenographic research was conducted in order to understand the need, opportunity, benefits, and limitations of a proposed humanitarian engineering curriculum. The potential role of the engineer in marginalized communities and details regarding what a humanitarian engineering program could look like were also investigated. Thirty-two semi-structured research interviews were conducted in Canada and Ghana in order to collect a pool of understanding before a phenomenographic analysis resulted in five distinct outcome spaces. The data suggests that an effective curriculum design will include teaching technical skills in conjunction with instructing about issues of social justice, social location, cultural awareness, root causes of marginalization, a broader understanding of technology, and unlearning many elements about the role of the engineer and the dominant economic/political ideology. Cross-cultural engineering development placements are a valuable pedagogical experience but risk benefiting the student disproportionately more than the receiving community. Local development placements offer different rewards and liabilities. To conclude, a major adjustment in engineering curriculum to address human development is appropriate and this new curriculum should include both local and international placements. However, the great force of altruism must be directed towards creating meaningful and lasting change.

MathBrowser: Web-Enabled Mathematical Software with Application to the Chemistry Curriculum, v 1.0

NASA Astrophysics Data System (ADS)

Goldsmith, Jack G.

1997-10-01

MathSoft: Cambridge, MA, 1996; free via ftp from www.mathsoft.com. The movement to provide computer-based applications in chemistry has come to focus on three main areas: software aimed at specific applications (drawing, simulation, data analysis, etc.), multimedia applications designed to assist in the presentation of conceptual information, and packages to be used in conjunction with a particular textbook at a specific point in the chemistry curriculum. The result is a situation where no single software package devoted to problem solving can be used across a large segment of the curriculum. Adoption of World Wide Web (WWW) technology by a manufacturer of mathematical software, however, has produced software that provides an attractive means of providing a problem-solving resource to students in courses from freshman through senior level.

Math Description Engine Software Development Kit

NASA Technical Reports Server (NTRS)

Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

2010-01-01

The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

An integrated approach to engineering curricula improvement with multi-objective decision modeling and linear programming

NASA Astrophysics Data System (ADS)

Shea, John E.

The structure of engineering curricula currently in place at most colleges and universities has existed since the early 1950's, and reflects an historical emphasis on a solid foundation in math, science, and engineering science. However, there is often not a close match between elements of the traditional engineering education, and the skill sets that graduates need to possess for success in the industrial environment. Considerable progress has been made to restructure engineering courses and curricula. What is lacking, however, are tools and methodologies that incorporate the many dimensions of college courses, and how they are structured to form a curriculum. If curriculum changes are to be made, the first objective must be to determine what knowledge and skills engineering graduates need to possess. To accomplish this, a set of engineering competencies was developed from existing literature, and used in the development of a comprehensive mail survey of alumni, employers, students and faculty. Respondents proposed some changes to the topics in the curriculum and recommended that work to improve the curriculum be focused on communication, problem solving and people skills. The process of designing a curriculum is similar to engineering design, with requirements that must be met, and objectives that must be optimized. From this similarity came the idea for developing a linear, additive, multi-objective model that identifies the objectives that must be considered when designing a curriculum, and contains the mathematical relationships necessary to quantify the value of a specific alternative. The model incorporates the three primary objectives of engineering topics, skills, and curriculum design principles and uses data from the survey. It was used to design new courses, to evaluate various curricula alternatives, and to conduct sensitivity analysis to better understand their differences. Using the multi-objective model to identify the highest scoring curriculum from a catalog of courses is difficult because of the many factors being considered. To assist this process, the multi-objective model and the curriculum requirements were incorporated in a linear program to select the "optimum" curriculum. The application of this tool was also beneficial in identifying the active constraints that limit curriculum development and content.

Engineering Curriculum Development: Balancing Employer Needs and National Interest--A Case Study.

ERIC Educational Resources Information Center

Buniyamin, Norlida; Mohamad, Zainuddin

The Faculty of Mechanical Engineering at the University Teknologi MARA, Malaysia, developed an undergraduate-level engineering curriculum that balances national interests with those of employers and academics. The curriculum was based on materials posted at the Internet sites of universities in the United States, United Kingdom, and Malaysia…

Building International Experiences into an Engineering Curriculum--A Design Project-Based Approach

ERIC Educational Resources Information Center

Maldonado, Victor; Castillo, Luciano; Carbajal, Gerardo; Hajela, Prabhat

2014-01-01

This paper is a descriptive account of how short-term international and multicultural experiences can be integrated into early design experiences in an aerospace engineering curriculum. Such approaches are considered as important not only in fostering a student's interest in the engineering curriculum, but also exposing them to a multicultural…

Engineering Curriculum in the Preschool Classroom: The Teacher's Experience

ERIC Educational Resources Information Center

Bagiati, Aikaterini; Evangelou, Demetra

2015-01-01

The study presented here focuses on the development of an early education Science, Technology, Engineering and Mathematics (STEM) curriculum with emphasis on engineering. This article presents the teacher's experience as she undertook the task of familiarising herself with the new content and using the curriculum in a university based…

Recovery Act - An Interdisciplinary Program for Education and Outreach in Transportation Electrification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Carl; Bohmann, Leonard; Naber, Jeffrey

2013-01-30

1) How the project adds to the education of engineering students in the area of vehicle electrification: This project created and implemented a significant interdisciplinary curriculum in HEV engineering that includes courses focused on the major components (engines, battery cells, e-machines, and power electronics). The new curriculum, rather uniquely, features two new classes and two new labs that emphasize a vehicle level integration of a hybrid electric powertrain that parallels the vehicle development process used by the OEMs - commercial grade software is used to design a hybrid electric vehicle, hardware-in-the-loop testing is performed on each component until the entiremore » powertrain is optimized, the calibration is flashed to a vehicle, ride-and-drives are executed including on board data acquisition. In addition, nine existing courses were modified by adding HEV material to the courses. 2) The educational effectiveness and economic feasibility of the new curriculum: The new courses are offered at both the undergraduate and graduate levels. They are listed across the college in mechanical, chemical, electrical, and materials science and engineering. They are offered both on campus and to distance learning students. Students across the college of engineering and at all degree levels are integrating these courses into their degree programs. Over the three year project the course enrollments on-campus has totaled 1,249. The distance learning enrollments has totaled 315. With such robust enrollments we absolutely expect that these courses will be in the curriculum for the long run. 3) How the project is otherwise of benefit to the public: One outcome of the project is the construction of the Michigan Tech Mobile Lab. Two complete HEV dynamometer test cells, and four work stations are installed in the 16.2 meter Mobile Laboratory and hauled by a class 8 truck. The Mobile Lab is used to teach the university courses. It is also used to deliver short courses to industry, K-12 outreach, and public education. In 2012 the Mobile Lab participated in 22 outreach events, locally, throughout Michigan, and including events in Washington DC, Illinois, and Wisconsin. The Mobile Lab is a hit wherever it goes. In 2013 we will partner with the US Army TARDEC and be featured in their Green Warrior Convoy, a ten city tour starting in Detroit and finishing in Washington DC.« less

Utilising database-driven interactive software to enhance independent home-study in a flipped classroom setting: going beyond visualising engineering concepts to ensuring formative assessment

NASA Astrophysics Data System (ADS)

Comerford, Liam; Mannis, Adam; DeAngelis, Marco; Kougioumtzoglou, Ioannis A.; Beer, Michael

2018-07-01

The concept of formative assessment is considered by many to play an important role in enhancing teaching in higher engineering education. In this paper, the concept of the flipped classroom as part of a blended learning curriculum is highlighted as an ideal medium through which formative assessment practices arise. Whilst the advantages of greater interaction between students and lecturers in classes are numerous, there are often clear disadvantages associated with the independent home-study component that complements timetabled sessions in a flipped classroom setting, specifically, the popular method of replacing traditional classroom teaching with video lectures. This leads to a clear lack of assurances that the cited benefits of a flipped classroom approach are echoed in the home-study arena. Over the past three years, the authors have sought to address identified deficiencies in this area of blended learning through the development of database-driven e-learning software with the capability of introducing formative assessment practices to independent home-study. This paper maps out aspects of two specific evolving practices at separate institutions, from which guiding principles of incorporating formative assessment aspects into e-learning software are identified and highlighted in the context of independent home-study as part of a flipped classroom approach.

A systematic approach to engineering ethics education.

PubMed

Li, Jessica; Fu, Shengli

2012-06-01

Engineering ethics education is a complex field characterized by dynamic topics and diverse students, which results in significant challenges for engineering ethics educators. The purpose of this paper is to introduce a systematic approach to determine what to teach and how to teach in an ethics curriculum. This is a topic that has not been adequately addressed in the engineering ethics literature. This systematic approach provides a method to: (1) develop a context-specific engineering ethics curriculum using the Delphi technique, a process-driven research method; and (2) identify appropriate delivery strategies and instructional strategies using an instructional design model. This approach considers the context-specific needs of different engineering disciplines in ethics education and leverages the collaboration of engineering professors, practicing engineers, engineering graduate students, ethics scholars, and instructional design experts. The proposed approach is most suitable for a department, a discipline/field or a professional society. The approach helps to enhance learning outcomes and to facilitate ethics education curriculum development as part of the regular engineering curriculum.

Explore-create-share study: An evaluation of teachers as curriculum innovators in engineering education

NASA Astrophysics Data System (ADS)

Berry, Ayora

The purpose of this study was to investigate the effects of a curriculum design-based (CDB) professional development model on K-12 teachers' capacity to integrate engineering education in the classroom. This teacher professional development approach differs from other training programs where teachers learn how to use a standard curriculum and adopt it in their classrooms. In a CDB professional development model teachers actively design lessons, student resources, and assessments for their classroom instruction. In other science, technology, engineering and mathematics (STEM) disciplines, CDB professional development has been reported to (a) position teachers as architects of change, (b) provide a professional learning vehicle for educators to reflect on instructional practices and develop content knowledge, (c) inspire a sense of ownership in curriculum decision-making among teachers, and (d) use an instructional approach that is coherent with teachers' interests and professional goals. The CDB professional development program in this study used the Explore-Create-Share (ECS) framework as an instructional model to support teacher-led curriculum design and implementation. To evaluate the impact of the CDB professional development and associated ECS instructional model, three research studies were conducted. In each study, the participants completed a six-month CDB professional development program, the PTC STEM Certificate Program, that included sixty-two instructional contact hours. Participants learned about industry and education engineering concepts, tested engineering curricula, collaborated with K-12 educators and industry professionals, and developed project-based engineering curricula using the ECS framework. The first study evaluated the impact of the CDB professional development program on teachers' engineering knowledge, self-efficacy in designing engineering curriculum, and instructional practice in developing project-based engineering units. The study included twenty-six teachers and data was collected pre-, mid-, and post-program using teacher surveys and a curriculum analysis instrument. The second study evaluated teachers' perceptions of the ECS model as a curriculum authoring tool and the quality of the curriculum units they developed. The study included sixty-two participants and data was collected post-program using teacher surveys and a curriculum analysis instrument. The third study evaluated teachers' experiences implementing ECS units in the classroom with a focus on identifying the benefits, challenges and solutions associated with project-based engineering in the classroom. The study included thirty-one participants and data was collected using an open-ended survey instrument after teachers completed implementation of the ECS curriculum unit. Results of these three studies indicate that teachers can be prepared to integrate engineering in the classroom using a CDB professional development model. Teachers reported an increase in engineering content knowledge, improved their self-efficacy in curriculum planning, and developed high quality instructional units that were aligned to engineering design practices and STEM educational standards. The ECS instructional model was acknowledged as a valuable tool for developing and implementing engineering education in the classroom. Teachers reported that ECS curriculum design aligned with their teaching goals, provided a framework to integrate engineering with other subject-area concepts, and incorporated innovative teaching strategies. After implementing ECS units in the classroom, teachers reported that the ECS model engaged students in engineering design challenges that were situated in a real world context and required the application of interdisciplinary content knowledge and skills. Teachers also reported a number of challenges related to scheduling, content alignment, and access to resources. In the face of these obstacles, teachers presented a number of solutions that included optimization of one's teaching practice, being resource savvy, and adopting a growth mindset.

Science and Engineering Graphics I. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Craig, Jerry; Stapleton, Jerry

This study guide is part of a program of studies entitled Science and Engineering Technician (SET) Curriculum. The SET Curriculum was developed for the purpose of training technicians in the use of electronic instruments and their applications. It integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology,…

An Empirical Study of Industrial Engineering and Management Curriculum Reform in Fostering Students' Creativity

ERIC Educational Resources Information Center

Chen, Chi-Kuang; Jiang, Bernard C.; Hsu, Kuang-Yiao

2005-01-01

The objective of this paper is to examine the effectiveness of a creativity-fostering program in industrial engineering and management (IE&M) curriculum reform. Fostering creativity in students has become a crucial issue in industrial engineering education. In a survey of previous studies, we found few on IE&M curriculum reform. In…

Barriers to the Implementation of Project Lead the Way as Perceived by Indiana High School Principals

ERIC Educational Resources Information Center

Shields, C. J.

2007-01-01

Technology education (TE) has come to encompass many facets of curriculum, ranging from industrial arts (IA) to integrating problem-solving and engineering concepts into the curriculum. For technology educators who have chosen the pre-engineering problem-solving route there is a pre-engineering curriculum called Project Lead The Way (PLTW), that…

A Talent for Tinkering: Developing Talents in Children from Low-Income Households through Engineering Curriculum

ERIC Educational Resources Information Center

Robinson, Ann; Adelson, Jill L.; Kidd, Kristy A.; Cunningham, Christine M.

2018-01-01

Guided by the theoretical framework of curriculum as a platform for talent development, this quasi-experimental field study investigated an intervention focused on engineering curriculum and curriculum based on a biography of a scientist through a comparative design implemented in low-income schools. Student outcome measures included science…

A Project-based Spiral Curriculum for Introductory Courses in ChE: Part 2. Implementation.

ERIC Educational Resources Information Center

Dixon, Anthony G.; Clark, William M.; DiBiasio, David

2000-01-01

Reports the development, delivery, and assessment of a project-based spiral curriculum for the first sequence chemical engineering courses. Technical proficiency of students under the spiral curriculum was equal to or better than that of students under a traditional curriculum. Attitudes toward chemical engineering and teamwork were better, and…

Materials and Fabrication Methods I. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Lindberg, Andrew; And Others

This study guide is part of a curriculum entitled Science and Engineering Technician (SET) Curriculum, a program of studies which integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology. The purpose of this national curriculum development project was to provide a framework for…

Microcomputer Software Technician Curriculum.

ERIC Educational Resources Information Center

EASTCONN Regional Educational Services Center, North Windham, CT.

This curriculum guide, developed for high schools in Connecticut, outlines a 4-year program for training microcomputer software technicians. Following a list of nine general objectives of the program, the guide provides a list of competencies that students are expected to develop in each of the courses of the 4-year program. The guide then…

Hierarchy curriculum for practical skills training in optics and photonics

NASA Astrophysics Data System (ADS)

Zheng, XiaoDong; Wang, XiaoPing; Liu, Xu; Liu, XiangDong; Lin, YuanFang

2017-08-01

The employers in optical engineering fields hope to recruit students who are capable of applying optical principles to solve engineering problems and have strong laboratory skills. In Zhejiang University, a hierarchy curriculum for practical skill training has been constructed to satisfy this demand. This curriculum includes "Introductive practicum" for freshmen, "Opto-mechanical systems design", "Engineering training", "Electronic system design", "Student research training program (SRTP)", "National University Students' Optical-Science-Technology Competition game", and "Offcampus externship". Without cutting optical theory credit hours, this hierarchy curriculum provides a step-by-step solution to enhance students' practical skills. By following such a hierarchy curriculum, students can smoothly advance from a novice to a qualified professional expert in optics. They will be able to utilize optical engineering tools to design, build, analyze, improve, and test systems, and will be able to work effectively in teams to solve problems in engineering and design.

Engineering design skills coverage in K-12 engineering program curriculum materials in the USA

NASA Astrophysics Data System (ADS)

Chabalengula, Vivien M.; Mumba, Frackson

2017-11-01

The current K-12 Science Education framework and Next Generation Science Standards (NGSS) in the United States emphasise the integration of engineering design in science instruction to promote scientific literacy and engineering design skills among students. As such, many engineering education programmes have developed curriculum materials that are being used in K-12 settings. However, little is known about the nature and extent to which engineering design skills outlined in NGSS are addressed in these K-12 engineering education programme curriculum materials. We analysed nine K-12 engineering education programmes for the nature and extent of engineering design skills coverage. Results show that developing possible solutions and actual designing of prototypes were the highly covered engineering design skills; specification of clear goals, criteria, and constraints received medium coverage; defining and identifying an engineering problem; optimising the design solution; and demonstrating how a prototype works, and making iterations to improve designs were lowly covered. These trends were similar across grade levels and across discipline-specific curriculum materials. These results have implications on engineering design-integrated science teaching and learning in K-12 settings.

Civil Engineering Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide presents civil engineering technology curriculum for technical institutes in Georgia. The general information section contains the following: purpose and objectives; program description, including admissions, typical job titles, and accreditation and certification; and curriculum model, including standard curriculum sequence and…

Incorporating a Product Archaeology Paradigm across the Mechanical Engineering Curriculum

ERIC Educational Resources Information Center

Moore-Russo, Deborah; Cormier, Phillip; Lewis, Kemper; Devendorf, Erich

2013-01-01

Historically, the teaching of design theory in an engineering curriculum has been relegated to a senior capstone design experience. Presently, however, engineering design concepts and courses can be found through the entirety of most engineering programs. Educators have recognized that engineering design provides a foundational platform that can…

The Significance of Context for Curriculum Development in Engineering Education: A Case Study across Three African Countries

ERIC Educational Resources Information Center

Case, Jennifer M.; Fraser, Duncan M.; Kumar, Anil; Itika, Ambrose

2016-01-01

Curriculum reform is a key topic in the engineering education literature, but much of this discussion proceeds with little engagement with the impact of the local context in which the programme resides. This article thus seeks to understand the influence of local contextual dynamics on curriculum reform in engineering education. The empirical…

Physics of Mechanical, Gaseous, and Fluid Systems. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Dixon, Peggy; And Others

This study guide is part of a program of studies entitled Science and Engineering Technician (SET) Curriculum. The SET Curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology. The objective of this curriculum development project is to train technicians in the use of…

New Solutions to Curricular Problems.

ERIC Educational Resources Information Center

Willman, Fred

1992-01-01

Discusses resources for curriculum design and choosing technology to fit with the curriculum developed. Lists questions about curriculum development raised by the Manhattan Music Curriculum Project. Describes software and hardware that place students in the many roles undertaken by musicians. Emphasizes the development of cognitive as well as…

Massachusetts Science and Technology Engineering Curriculum Framework

ERIC Educational Resources Information Center

Massachusetts Department of Education, 2006

2006-01-01

This 2006 "Massachusetts Science and Technology/Engineering Curriculum Framework" provides a guide for teachers and curriculum coordinators regarding specific content to be taught from PreK through high school. Following this "Organization" chapter, the "Framework" contains the following sections: (1) Philosophy and…

Computerised Accounting Software; A Curriculum That Enhances an Accounting Programme

ERIC Educational Resources Information Center

Machera, Robert P.; Machera, Precious C.

2017-01-01

There has been an outcry in commerce and industry about students who fail to perform in the accounting department due to lack of "practical accounting skills". It is from this background that the researchers were motivated to investigate the impact of a Computerised Accounting Software Curriculum that enhances an Accounting Programme. At…

Mathematical and Scientific Foundations for an Integrative Engineering Curriculum.

ERIC Educational Resources Information Center

Carr, Robin; And Others

1995-01-01

Describes the Mathematical and Scientific Foundations of Engineering curriculum which emphasizes the mathematical and scientific concepts common to all engineering fields. Scientists and engineers together devised topics and experiments that emphasize the relevance of theory to real-world applications. Presents material efficiently while building…

The History of Chemical Engineering and Pedagogy: The Paradox of Tradition and Innovation

ERIC Educational Resources Information Center

Wankat, Phillip C.

2009-01-01

The Massachusetts Institute of Technology started the first US chemical engineering program six score years ago. Since that time, the chemical engineering curriculum has evolved. The latest versions of the curriculum are attempts to broaden chemical engineering to add product engineering, biology and nanotechnology to the traditional process…

Does Curriculum Practical Training Affect Engineers' Workplace Outcomes? Evidence from an Engineer Survey in China

ERIC Educational Resources Information Center

Li, Jing; Zhang, Yu; Tsang, Mun; Li, Manli

2015-01-01

With the increasing attention to STEM (Science, Technology, Engineering, and Math), hands-on Curriculum Practical Training (CPT) has been expanding rapidly worldwide as a requirement of the undergraduate engineering education. In China, a typical CPT for undergraduate engineering students requires several weeks of hands-on training in the…

Curriculum: Integrating Health and Safety Into Engineering Curricula.

ERIC Educational Resources Information Center

Talty, John T.

1985-01-01

National Institute for Occupational Safety and Health instituted a project in 1980 to encourage engineering educators to focus on occupational safety and health issues in engineering curricula. Progress to date is outlined, considering specific results in curriculum development, engineering society interaction, and formation of a teaching…

Aerospace engineering curriculum for the 21st century

NASA Technical Reports Server (NTRS)

Simitses, George J.

1995-01-01

The second year of the study was devoted to completing the information-gathering phase of this redesign effort, using the conclusions from that activity to prepare the initial structure for the new curriculum, publicizing activities to a wider engineering forum, and preparing the department faculty (Aerospace Engineering and Engineering Mechanics at University of Cincinnati) for the roles they will play in the curriculum redesign and implementation. These activities are summarized briefly in this progress report. Attached is a paper resulting from the data acquisition of this effort, 'Educating Aerospace Engineers for the Twenty-First Century: Results of a Survey.'

Development Cooperation as Methodology for Teaching Social Responsibility to Engineers

ERIC Educational Resources Information Center

Lappalainen, Pia

2011-01-01

The role of engineering in promoting global well-being has become accentuated, turning the engineering curriculum into a means of dividing well-being equally. The gradual fortifying calls for humanitarian engineering have resulted in the incorporation of social responsibility themes in the university curriculum. Cooperation, communication,…

Investigating the Impact of a LEGO(TM)-Based, Engineering-Oriented Curriculum Compared to an Inquiry-Based Curriculum on Fifth Graders' Content Learning of Simple Machines

ERIC Educational Resources Information Center

Marulcu, Ismail

2010-01-01

This mixed method study examined the impact of a LEGO-based, engineering-oriented curriculum compared to an inquiry-based curriculum on fifth graders' content learning of simple machines. This study takes a social constructivist theoretical stance that science learning involves learning scientific concepts and their relations to each other. From…

A Project to Design, Develop, Implement, Test, Evaluate and Disseminate an Associate Degree Curriculum to Train Solar Engineering Technicians.

ERIC Educational Resources Information Center

Lowenstein, Michael Z.; Orsak, Charles

Phase 1 of a project in curriculum design and course development identified and is now developing a two-year solar engineering curriculum in response to the immediate need for trained solar manpower as indicated by research. The student-centered curriculum involves courses flowing from device to theory, intermixing of support and technical courses…

Finding Helpful Software Reviews.

ERIC Educational Resources Information Center

Kruse, Ted, Comp.

1987-01-01

Provides a list of evaluation services currently producing critical reviews of educational software. Includes information about The Apple K-12 Curriculum Software Reference, The Educational Software Preview, The Educational Software Selector, MicroSIFT, and Only The Best: The Discriminating Guide for Preschool-Grade 12. (TW)

Technology reinvestment project manufacturing education and training: Engineering education in manufacturing across the curriculum. Annual report, June 24, 1994--June 23, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mulholland, G.; Powers, T.L.

1995-09-29

The goal of this project is to impart to engineering and business students, and to students from industry, the broad knowledge and practical skills to immediately help a manufacturing company become more competitive in any global economy while still providing a high quality work force for the 21st century. An integration of innovative, cross-disciplinary, manufacturing engineering and business education provided hand in hand with industry, will enable students, especially minority students, to have a real impact on manufacturing in this depressed region. The program was shortened and simplified to meet a budget of $2,000,000 versus the $3,000,000 in the-Proposal. Allmore » major objectives in the revised plan for the first year have been achieved with expenditures somewhat under the revised budget. Curriculum development with the advice and assistance of industry is ahead of schedule. Graduate minor degree curricula have been defined in Engineering and in Business. A summer intern project and guest lecture series have been well supported by industry. Facilities including advanced software have been brought on line. Cash and in-kind matching funds from industry, NMSU and the State total over $6m; this is 920% of the TRP funds expended. Cost sharing of cash is ahead of plan, of in-kind is slightly behind. The first group of 21 students have started one semester sooner than planned. The group is 25% minority and 45% female. Industry requests to interview graduates are coming in anticipation of availability in the spring of 1996.« less

A System-Science Approach towards Model Construction for Curriculum Development.

ERIC Educational Resources Information Center

Chang, Ren-Jung; Yang, Hui-Chin

A new morphological model based on modern system science and engineering is constructed and proposed for curriculum research and development. A curriculum system is recognized as an engineering system that constitutes three components: clients, resources, and knowledge. Unlike the objective models that are purely rational and neatly sequential in…

A Competency Based Curriculum Guide: Ethanol Spark Ignition Engine Conversion.

ERIC Educational Resources Information Center

Blair, Brittain A.

This guide is a competency-based vocational curriculum designed to provide educators with viable ethanol (100 percent alcohol) engine conversion procedures stated in simple terms and set in a flexible educational environment. The curriculum is designed so that educators can form various combinations of instructional activities and resource…

How Much Do Engineering Students Know about Sustainable Development? The Findings of an International Survey and Possible Implications for the Engineering Curriculum

ERIC Educational Resources Information Center

Azapagic, Adisa; Perdan, Slobodan; Shallcross, David

2005-01-01

This paper addresses the issue of engineering education for sustainable development. In an attempt to facilitate a better integration of sustainability teaching into the engineering curriculum, it seeks to provide answers to the following fundamental questions: (1) How much do engineering students know about sustainable development? (2) What are…

Standardized Curriculum for Small Engine Repair.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

This curriculum guide for small engine repair was developed by the state of Mississippi to standardize vocational education course titles and core contents. The objectives contained in this document are common to all small engine repair programs in the state. The guide contains objectives for small engine repair I and II courses. Units in course I…

Engineering Students for the 21st Century: Student Development through the Curriculum

ERIC Educational Resources Information Center

Cheville, Alan; Bunting, Chuck

2011-01-01

Through support of the National Science Foundation's Department Level Reform program, "Engineering Students for the 21st Century" (ES21C) has implemented a ten-course sequence designed to help students develop into engineers. Spread across the Electrical and Computer Engineering (ECE) curriculum at Oklahoma State University, these…

Military Curriculum Materials for Vocational and Technical Education. Engine Principles, 8-3. Edition 5.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This individualized, self-paced course for independent study in engine principles has been adapted from military curriculum materials for vocational education use. The course provides the student with basic information on engine principles including different kinds of combustion engines, lubrication systems, and cooling systems. It is organized…

Deconstructing Engineering Education Programmes: The DEEP Project to Reform the Mechanical Engineering Curriculum

ERIC Educational Resources Information Center

Busch-Vishniac, Ilene; Kibler, Tom; Campbell, Patricia B.; Patterson, Eann; Guillaume, Darrell; Jarosz, Jeffrey; Chassapis, Constantin; Emery, Ashley; Ellis, Glenn; Whitworth, Horace; Metz, Susan; Brainard, Suzanne; Ray, Pradosh

2011-01-01

The goal of the Deconstructing Engineering Education Programmes project is to revise the mechanical engineering undergraduate curriculum to make the discipline more able to attract and retain a diverse community of students. The project seeks to reduce and reorder the prerequisite structure linking courses to offer greater flexibility for…

Building an Evaluation Strategy for an Integrated Curriculum in Chemical Engineering

ERIC Educational Resources Information Center

McCarthy, Joseph J.; Parker, Robert S.; Abatan, Adetola; Besterfield-Sacre, Mary

2011-01-01

Increasing knowledge integration has gained wide-spread support as an important goal in engineering education. The Chemical Engineering Pillars curriculum at the University of Pittsburgh, unique for its use of block scheduling, is one of the first four-year, integrated curricula in engineering, and is specifically designed to facilitate knowledge…

Chemical Engineering Curricula for the Future: Synopsis of Proceedings of a U.S.-India Conference, January, 1988.

ERIC Educational Resources Information Center

Ramkrishna, D.; And Others

1989-01-01

This is a summary of a seminar for changing the undergraduate chemical engineering curriculum in India. Identifies and describes biotechnology, materials for structural and microelectronic catalysis, and new separation processes as emerging areas. Evaluates the current curriculum, including basic science, engineering lore, chemical engineering,…

Development and Experimental Study of Education Through the Synergetic Training for the Engineering Enhanced Medicine “ESTEEM” in Tohoku University

NASA Astrophysics Data System (ADS)

Yamano, Masahiro; Matsuki, Noriaki; Numayama, Keiko; Takeda, Motohiro; Hayasaka, Tomoaki; Ishikawa, Takuji; Yamaguchi, Takami

We developed new bio-medical engineering curriculum for industrial engineers, and we confirmed that the engineer's needs and the educative effects by holding a trail program. This study in Tohoku University was supported by the Ministry of Economy, Trade and Industry (METI) . We named the curriculum as “ESTEEM” which is acronym of project title “Education through the Synergetic Training for the Engineering Enhanced Medicine” . In Tohoku University, the “REDEEM” curriculum which is an entry level course of bio-medical engineering for engineers has been already held. The positioning of “ESTEEM” program is an advanced course to enhance knowledge and experience in clinical point of view. The program is consisted of the problem based learning (PBL) style lectures, practical training, and observation learning in hospital. It is a unique opportunity to have instruction by doctors, from diagnosis to surgical operation, from traditional technique to front-line medical equipment. In this paper, we report and discuss on the progress of the new bio-medical engineering curriculum.

Equasions for Curriculum Improvement.

ERIC Educational Resources Information Center

Eckenrod, James S.

1986-01-01

Describes the Technology in Curriculum (TIC) program resource guides which will be distributed to California schools in the fall of 1986. These guides match available instructional television programs and computer software to existing California curriculum guides in order to facilitate teachers' classroom use. (JDH)

Marketing Education Computer Curriculum. Final Report.

ERIC Educational Resources Information Center

Pittsburgh Univ., PA. School of Education.

A project developed computer software based upon Interstate Distributive Education Curriculum Consortium (IDECC) competency-based materials to produce a new curriculum management system for Pennsylvania secondary marketing education programs. During the project, an advisory committee composed of secondary marketing teachers, business people, and…

Knowledge Engineering as a Component of the Curriculum for Medical Cybernetists.

PubMed

Karas, Sergey; Konev, Arthur

2017-01-01

According to a new state educational standard, students who have chosen medical cybernetics as their major must develop a knowledge engineering competency. Previously, in the course "Clinical cybernetics" while practicing project-based learning students were designing automated workstations for medical personnel using client-server technology. The purpose of the article is to give insight into the project of a new educational module "Knowledge engineering". Students will acquire expert knowledge by holding interviews and conducting surveys, and then they will formalize it. After that, students will form declarative expert knowledge in a network model and analyze the knowledge graph. Expert decision making methods will be applied in software on the basis of a production model of knowledge. Project implementation will result not only in the development of analytical competencies among students, but also creation of a practically useful expert system based on student models to support medical decisions. Nowadays, this module is being tested in the educational process.

Software Engineering Guidebook

NASA Technical Reports Server (NTRS)

Connell, John; Wenneson, Greg

1993-01-01

The Software Engineering Guidebook describes SEPG (Software Engineering Process Group) supported processes and techniques for engineering quality software in NASA environments. Three process models are supported: structured, object-oriented, and evolutionary rapid-prototyping. The guidebook covers software life-cycles, engineering, assurance, and configuration management. The guidebook is written for managers and engineers who manage, develop, enhance, and/or maintain software under the Computer Software Services Contract.

A Bachelor of Engineering Technology Curriculum in Water Quality Management: Course Guides.

ERIC Educational Resources Information Center

Cole, Charles A.; And Others

Contained are course guides for a Bachelor of Engineering Technology (BET) Curriculum in Water Quality Management. Detailed course content, as well as instructional resources, are included in this volume. Each guide is written in behavioral terms using the instructional objective format. A suggested curriculum is shown with methods of…

Materials and Fabrication Methods II. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Lindberg, Andrew; Bay, Robert

This study guide is part of a program of studies entitled Science and Engineering Technician (SET) Curriculum. The SET Curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology with the objective of training technicians in the use of electronic instruments and their…

Chemical Science and Technology I. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Ballinger, Jack T.; Wolf, Lawrence J.

This study guide is part of an interdisciplinary program of studies entitled the Science and Engineering Technician (SET) Curriculum. This curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology with the objective of training technicians in the use of electronic…

Evaluation and Dissemination of the Electrical Power Engineering Technology Curriculum Model. Final Report.

ERIC Educational Resources Information Center

McNeill, Perry R.; And Others

Described is a project initiated to evaluate and disseminate the Electrical Power Engineering Technology Curriculum developed at Oklahoma State University. The objective of the evaluation phase, to have the original model curriculum evaluated by both present and potential employers, was accomplished in a two-day workshop with participation of…

Analog and Digital Electronics. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Cavanaugh, Vince; Greer, Marlin

This study guide is part of an interdisciplinary curriculum entitled the Science and Engineering Technician (SET) Curriculum devised to provide basic information to train technicians in the use of electronic instruments and their application. The program of study integrates elements from the disciplines of chemistry, physics, mathematics,…

The Pre-Engineering Curriculum Proceedings of the Annual CSU Conference on Innovation in Engineering Education. (1st, San Jose, California, April 26, 1991).

ERIC Educational Resources Information Center

California State Univ., Engineering Council for Teaching and Learning.

This document provides the keynote address and papers delivered at the 1991 California State University Conference on Innovation in Engineering Education which focused on the pre-engineering curriculum. The conference was convened as a collaborative effort by faculty to address the following issues in engineering education: (1) the attraction and…

PLTW and Epics-High: Curriculum Comparisons to Support Problem Solving in the Context of Engineering Design. Research in Engineering and Technology Education

ERIC Educational Resources Information Center

Kelley, Todd; Brenner, Daniel C.; Pieper, Jon T.

2010-01-01

A comparative study was conducted to compare two approaches to engineering design curriculum between different schools (inter-school) and between two curricular approaches, "Project Lead the Way" (PLTW) and "Engineering Projects in Community Service" (EPIC High) (inter-curricular). The researchers collected curriculum…

Problems Associated with a Lack of Cohesive Policy in K-12 Pre-College Engineering

ERIC Educational Resources Information Center

Chandler, John; Fontenot, A. Dean; Tate, Derrick

2011-01-01

This article identifies a number of issues associated with current STEM education reform efforts, especially with regard to efforts to integrate engineering education into the K-12 curriculum. Precollege engineering is especially problematic in STEM reform since there is no well-established tradition of engineering in the K-12 curriculum. This…

A New Introductory Course in the Engineering Education at the University of Tromsø

ERIC Educational Resources Information Center

Arne, Gjengedal; Tor, Schive

2016-01-01

In 2011 a new national curriculum for the education of engineers was established in Norway. The objective of the curriculum is to ascertain that engineering education is professionally oriented, integrated, research-based and has a high academic standard. Institutions are instructed to facilitate a holistic approach to the engineering profession,…

Proceedings of the Seventeenth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1992-01-01

Proceedings of the Seventeenth Annual Software Engineering Workshop are presented. The software Engineering Laboratory (SEL) is an organization sponsored by NASA/Goddard Space Flight Center and created to investigate the effectiveness of software engineering technologies when applied to the development of applications software. Topics covered include: the Software Engineering Laboratory; process measurement; software reuse; software quality; lessons learned; and is Ada dying.

Software Past, Present, and Future: Views from Government, Industry and Academia

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Page, Jerry; Evangelist, Michael

2000-01-01

Views from the NASA CIO NASA Software Engineering Workshop on software development from the past, present, and future are presented. The topics include: 1) Software Past; 2) Software Present; 3) NASA's Largest Software Challenges; 4) 8330 Software Projects in Industry Standish Groups 1994 Report; 5) Software Future; 6) Capability Maturity Model (CMM): Software Engineering Institute (SEI) levels; 7) System Engineering Quality Also Part of the Problem; 8) University Environment Trends Will Increase the Problem in Software Engineering; and 9) NASA Software Engineering Goals.

Explore-Create-Share Study: An Evaluation of Teachers as Curriculum Innovators in Engineering Education

ERIC Educational Resources Information Center

Berry, Ayora

2017-01-01

The purpose of this study was to investigate the effects of a curriculum design-based (CDB) professional development model on K-12 teachers' capacity to integrate engineering education in the classroom. This teacher professional development approach differs from other training programs where teachers learn how to use a standard curriculum and…

Basic Principles of Marine Diesel Engines, 8-2. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This volume of student materials for a secondary/postsecondary level course in principles of marine diesel engines is one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. The purpose of the individualized, self-paced course is to acquaint…

Discussion on teaching reform of environmental planning and management

NASA Astrophysics Data System (ADS)

Zhang, Qiugen; Chen, Suhua; Xie, Yu; Wei, Li'an; Ding, Yuan

2018-05-01

The curriculum of environmental planning and management is an environmental engineering major curriculum established by the teaching steering committee of environmental science and engineering of Education Ministry, which is the core curriculum of Chinese engineering education professional certification. It plays an important role in cultivating environmental planning and environmental management ability of environmental engineering major. The selection and optimization of the course teaching content of environmental planning and management were discussed which including curriculum teaching content updating and optimizing and teaching resource system construction. The comprehensive application of teaching method was discussed which including teaching method synthesis and teaching method. The final combination of the assessment method was also discussed which including the formative assessment normal grades and the final result of the course examination. Through the curriculum comprehensive teaching reform, students' knowledge had been broadened, the subject status and autonomy of learning had been enhanced, students' learning interest had been motivated, the ability of students' finding, analyzing and solving problems had been improved. Students' innovative ability and positive spirit had been well cultivated.

Standardized Curriculum for Outboard Marine Engine Mechanics.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

This curriculum guide for outboard marine engine mechanics was developed by the state of Mississippi to standardize vocational education course titles and core contents. The objectives contained in this document are common to all outboard marine engine mechanics programs in the state. The guide contains objectives for outboard marine engine…

Small Engines and Outboard Marine Mechanics Curriculum.

ERIC Educational Resources Information Center

Alaska State Dept. of Education, Juneau. Div. of Adult and Vocational Education.

This competency-based curriculum guide is a handbook for the development of small engine and outboard marine mechanics programs. Based on a survey of Alaskan small engines and marine mechanics employers, it includes all competencies a student should acquire in such a mechanics program. The handbook stresses the importance of understanding the…

Diversity Issues in the Engineering Curriculum

ERIC Educational Resources Information Center

Ihsen, Susanne; Gebauer, Sabrina

2009-01-01

Teaching engineering studies students about diversity issues as part of the curriculum in engineering programs is an essential part of preparing the students for their professional life. By teaching them what this is and what it means for their (professional) lives sensitises them towards more responsibility. The idea is to connect diversity…

Using Teaching Portfolios to Revise Curriculum and Explore Instructional Practices of Technology and Engineering Education Teachers

ERIC Educational Resources Information Center

Lomask, Michal; Crismond, David; Hacker, Michael

2018-01-01

This paper reports on the use of teaching portfolios to assist in curriculum revision and the exploration of instructional practices used by middle school technology and engineering education teachers. Two new middle school technology and engineering education units were developed through the Engineering for All (EfA) project. One EfA unit focused…

Role of Human Factors and Engineering Psychology in Undergraduate and Graduate Engineering Curriculum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piyush Sabharwall; Jesse Rebol

The engineering discipline is a profession of acquiring and applying technical knowledge, and the focus of engineering psychology is to optimize the effectiveness and efficiency with which human activities are conducted. Having human factors and engineering psychology be a permanent part of the engineering curriculum will make students aware of them, so they can learn from past experiences and avoid making the same mistakes their peers made. (Should be close to 200 words)

Software engineering as an engineering discipline

NASA Technical Reports Server (NTRS)

Gibbs, Norman

1988-01-01

The goals of the Software Engineering Institute's Education Program are as follows: to increase the number of highly qualified software engineers--new software engineers and existing practitioners; and to be the leading center of expertise for software engineering education and training. A discussion of these goals is presented in vugraph form.

Software engineering as an engineering discipline

NASA Technical Reports Server (NTRS)

Berard, Edward V.

1988-01-01

The following topics are discussed in the context of software engineering: early use of the term; the 1968 NATO conference; Barry Boehm's definition; four requirements fo software engineering; and additional criteria for software engineering. Additionally, the four major requirements for software engineering--computer science, mathematics, engineering disciplines, and excellent communication skills--are discussed. The presentation is given in vugraph form.

Annotated bibliography of Software Engineering Laboratory literature

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Valett, Jon D.

1991-01-01

An annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory is given. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. All materials have been grouped into eight general subject areas for easy reference: The Software Engineering Laboratory; The Software Engineering Laboratory: Software Development Documents; Software Tools; Software Models; Software Measurement; Technology Evaluations; Ada Technology; and Data Collection. Subject and author indexes further classify these documents by specific topic and individual author.

General Mechanical Repair. Minor Automotive Maintenance, Small Engine [Repair, and] Welding: Curriculum Guide and Lesson Plans.

ERIC Educational Resources Information Center

Hamlin, Larry

This document contains a curriculum guide and lesson plans for a general mechanical repair course with three sections: minor automotive maintenance, small engine repair, and welding. The curriculum guide begins with a matrix that relates the lesson plans to essential elements of math, science, language arts, and social studies and to Texas…

Analysing Learning Outcomes in an Electrical Engineering Curriculum Using Illustrative Verbs Derived from Bloom's Taxonomy

ERIC Educational Resources Information Center

Meda, Lawrence; Swart, Arthur James

2018-01-01

Learning outcomes are essential to any curriculum in education, where they need to be clear, observable and measurable. However, some academics structure learning outcomes in a way that does not promote student learning. The purpose of this article is to present the analyses of learning outcomes of an Electrical Engineering curriculum offered at a…

Systematic Curriculum Integration of Sustainable Development Using Life Cycle Approaches: The Case of the Civil Engineering Department at the Université de Sherbrooke

ERIC Educational Resources Information Center

Roure, Bastien; Anand, Chirjiv; Bisaillon, Véronique; Amor, Ben

2018-01-01

Purpose: The purpose of this paper is to provide a consistent and systematic integration framework of sustainable development (SD) in a civil engineering (CE) curriculum, given the connection between the two. Curriculum integration is a challenging project and requires the development of certain protocols to ensure success.…

Evidence-Based Conclusions Concerning Practice, Curriculum Design and Curriculum Reform in a Civil Engineering Capstone Design Course in Hong Kong

ERIC Educational Resources Information Center

Chan, Cecilia K. Y.; Wong, George C. K.; Law, Ada K. H.; Zhang, T.; Au, Francis T. K.

2017-01-01

This study aimed to provide evidence-based conclusions from students concerning a capstone-design course in a civil engineering programme in Hong Kong. The evidence was generated by designing a student-experience questionnaire. The questionnaire instrument was assessed for internal consistency in four scales (curriculum and structure changes;…

Software Engineering Laboratory Series: Proceedings of the Twentieth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1995-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 15

NASA Technical Reports Server (NTRS)

1997-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 14

NASA Technical Reports Server (NTRS)

1996-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 13

NASA Technical Reports Server (NTRS)

1995-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Tracking the Integration of Library Skills in the Curriculum.

ERIC Educational Resources Information Center

Gill, Suzanne L.

2003-01-01

Describes the use of IMSeries software, a relational database capable of implementing curriculum design, in an elementary school. Topics include Big6 research skills; tracking the scope and sequence of curriculum; tying library skills to curricular disciplines; information literacy; and examples of a lesson unit and assessment strategy. (LRW)

Fueling Chemical Engineering Concepts with Biodiesel Production: A Professional Development Experience for High School Pre-Service Teachers

ERIC Educational Resources Information Center

Gupta, Anju

2015-01-01

This one-day workshop for pre-service teachers was aimed at implementing a uniquely designed and ready-to-implement chemical engineering curriculum in high school coursework. This educational and professional development opportunity introduced: 1) chemical engineering curriculum and career opportunities, 2) basic industrial processes and flow…

Engineering in Elementary STEM Education: Curriculum Design, Instruction, Learning, and Assessment

ERIC Educational Resources Information Center

Cunningham, Christine M.

2018-01-01

Bolstered by new standards and new initiatives to promote STEM education, engineering is making its way into the school curriculum. This comprehensive introduction will help elementary educators integrate engineering into their classroom, school, or district in age-appropriate, inclusive, and engaging ways. Building on the work of a Museum of…

Curriculum Outline for Introduction to Engineering Chemistry. First Edition. Review Cycle-Annual.

ERIC Educational Resources Information Center

Schlenker, Richard M.

This curriculum outline consists of behavioral objectives (called terminal and enabling objectives) for Introduction to Engineering Chemistry, a one-semester, post-secondary course consisting of four 1-hour lectures each week. Course goal is to introduce marine engineering students to the rudiments of basic/introductory inorganic chemistry. The…

Biomedical Engineering and Cognitive Science Secondary Science Curriculum Development: A Three Year Study

ERIC Educational Resources Information Center

Klein, Stacy S.; Sherwood, Robert D.

2005-01-01

This study reports on a multi-year effort to create and evaluate cognitive-based curricular materials for secondary school science classrooms. A team of secondary teachers, educational researchers, and academic biomedical engineers developed a series of curriculum units that are based in biomedical engineering for secondary level students in…

Construction Mechanic, Engine Tune-Up II (Diesel), 8-8. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for vocational and technical education, teaches students to restore diesel engine performance to the manufacturer's specifications through troubleshooting and analyzing diesel engine fuel systems and to make minor and major adjustments to those components that directly affect engine…

A Curriculum of Value Creation and Management in Engineering

ERIC Educational Resources Information Center

Yannou, Bernard; Bigand, Michel

2004-01-01

As teachers and researchers belonging to two sister French engineering schools, we are convinced that the processes of value creation and management are essential in today's teaching of industrial engineering and project managers. We believe that such processes may be embedded in a three-part curriculum composed of value management and innovation…

A Pre-Engineering Program Using Robots to Attract Underrepresented High School and Community College Students

ERIC Educational Resources Information Center

Mosley, Pauline Helen; Liu, Yun; Hargrove, S. Keith; Doswell, Jayfus T.

2010-01-01

This paper gives an overview of a new pre-engineering program--Robotics Technician Curriculum--that uses robots to solicit underrepresented students pursuing careers in science, technology, engineering, and mathematics (STEM). The curriculum uses a project-based learning environment, which consists of part lecture and part laboratory. This program…

Enhancing the Undergraduate Industrial Engineering Curriculum: Defining Desired Characteristics and Emerging Topics

ERIC Educational Resources Information Center

Eskandari, Hamidreza; Sala-Diakanda, Serge; Furterer, Sandra; Rabelo, Luis; Crumpton-Young, Lesia; Williams, Kent

2007-01-01

Purpose: This paper aims to present the results of an initial research study conducted to identify the desired professional characteristics of an industrial engineer with an undergraduate degree and the emerging topic areas that should be incorporated into the curriculum to prepare industrial engineering (IE) graduates for the future workforce.…

Science and Engineering Technician Curriculum Development Project. Final Report.

ERIC Educational Resources Information Center

Mowery, Donald R.; Wolf, Lawrence J.

Project SET (Science and Engineering for Technicians) developed a series of study guides designed to teach generic science and engineering skills to students interested in becoming technicians. An entire 2-year curriculum is encompassed by these guides, geared for 2-year college students. Described in this final report are the project's rationale,…

TechXcite: Discover Engineering--A New STEM Curriculum

ERIC Educational Resources Information Center

Sallee, Jeff; Schmitt-McQuitty, Lynn; Swint, Sherry; Meek, Amanda; Ybarra, Gary; Dalton, Rodger

2015-01-01

TechXcite is an engineering-focused, discovery-based after-school science, technology, engineering, and math (STEM) program. The free curriculum is downloadable from http://techxcite.pratt.duke.edu/ and is comprised of eight Modules, each with four to five 45-minute activities that exercise the science and math learned in school by using…

"I Take Engineering with Me": Epistemological Transitions across an Engineering Curriculum

ERIC Educational Resources Information Center

Winberg, Christine; Winberg, Simon; Jacobs, Cecilia; Garraway, James; Engel-Hills, Penelope

2016-01-01

In this paper we study epistemological transitions across an intended engineering curriculum and recommend strategies to assist students in attaining the increasingly complex concepts and insights that are necessary for transition to advanced levels of study. We draw on Legitimation Code Theory [Maton, Karl. 2014, "Knowledge and Knowers:…

Can Diversity in the Undergraduate Engineering Population BE Enhanced Through Curricular Change?

NASA Astrophysics Data System (ADS)

Busch-Vishniac, Ilene J.; Jarosz, Jeffrey P.

The lack of diversity in the engineering workforce is a persistent problem, with no signs of pending improvement. The situation continues despite a serious technical workforce shortage in the United States. Efforts to promote diversity in the student body in U.S. engineering schools, such as industrial partnerships, academic services, and the establishment of social networks, have produced modest gains. The authors intend to pursue a distinctly different approach to the problem of encouraging a diverse engineering student population, one that focuses on the curriculum. This study reviews curricular innovations attempted to date as a basis for rebuilding the undergraduate engineering curriculum from the ground up. The goal is to produce a curriculum that retains the salient technical material but enhances the link between fundamentals and applications, reduces critical path lengths in the course sequence, introduces team experiences into all courses, and creates an atmosphere of inclusion rather than exclusion. The new curriculum will require trial, assessment, and revision before it is ready for adoption.

Computer-Aided Software Engineering - An approach to real-time software development

NASA Technical Reports Server (NTRS)

Walker, Carrie K.; Turkovich, John J.

1989-01-01

A new software engineering discipline is Computer-Aided Software Engineering (CASE), a technology aimed at automating the software development process. This paper explores the development of CASE technology, particularly in the area of real-time/scientific/engineering software, and a history of CASE is given. The proposed software development environment for the Advanced Launch System (ALS CASE) is described as an example of an advanced software development system for real-time/scientific/engineering (RT/SE) software. The Automated Programming Subsystem of ALS CASE automatically generates executable code and corresponding documentation from a suitably formatted specification of the software requirements. Software requirements are interactively specified in the form of engineering block diagrams. Several demonstrations of the Automated Programming Subsystem are discussed.

Software engineering laboratory series: Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Valett, Jon

1992-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) the Software Engineering Laboratory; (2) the Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

Software Engineering Laboratory Series: Proceedings of the Twenty-First Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1996-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Proceedings of the Twenty-Second Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1997-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Incorporating a Human-Computer Interaction Course into Software Development Curriculums

ERIC Educational Resources Information Center

Janicki, Thomas N.; Cummings, Jeffrey; Healy, R. Joseph

2015-01-01

Individuals have increasing options on retrieving information related to hardware and software. Specific hardware devices include desktops, tablets and smart devices. Also, the number of software applications has significantly increased the user's capability to access data. Software applications include the traditional web site, smart device…

Software engineering and the role of Ada: Executive seminar

NASA Technical Reports Server (NTRS)

Freedman, Glenn B.

1987-01-01

The objective was to introduce the basic terminology and concepts of software engineering and Ada. The life cycle model is reviewed. The application of the goals and principles of software engineering is applied. An introductory understanding of the features of the Ada language is gained. Topics addressed include: the software crises; the mandate of the Space Station Program; software life cycle model; software engineering; and Ada under the software engineering umbrella.

Investigating the impact of a LEGO(TM)-based, engineering-oriented curriculum compared to an inquiry-based curriculum on fifth graders' content learning of simple machines

NASA Astrophysics Data System (ADS)

Marulcu, Ismail

This mixed method study examined the impact of a LEGO-based, engineering-oriented curriculum compared to an inquiry-based curriculum on fifth graders' content learning of simple machines. This study takes a social constructivist theoretical stance that science learning involves learning scientific concepts and their relations to each other. From this perspective, students are active participants, and they construct their conceptual understanding through the guidance of their teacher. With the goal of better understanding the use of engineering education materials in classrooms the National Academy of Engineering and National Research Council in the book "Engineering in K-12 Education" conducted an in-depth review of the potential benefits of including engineering in K--12 schools as (a) improved learning and achievement in science and mathematics, (b) increased awareness of engineering and the work of engineers, (c) understanding of and the ability to engage in engineering design, (d) interest in pursuing engineering as a career, and (e) increased technological literacy (Katehi, Pearson, & Feder, 2009). However, they also noted a lack of reliable data and rigorous research to support these assertions. Data sources included identical written tests and interviews, classroom observations and videos, teacher interviews, and classroom artifacts. To investigate the impact of the design-based simple machines curriculum compared to the scientific inquiry-based simple machines curriculum on student learning outcomes, I compared the control and the experimental groups' scores on the tests and interviews by using ANCOVA. To analyze and characterize the classroom observation videotapes, I used Jordan and Henderson's (1995) method and divide them into episodes. My analyses revealed that the design-based Design a People Mover: Simple Machines unit was, if not better, as successful as the inquiry-based FOSS Levers and Pulleys unit in terms of students' content learning. I also found that students in the engineering group outperformed students in the control group in regards to their ability to answer open-ended questions when interviewed. Implications for students' science content learning and teachers' professional development are discussed.

Evaluation of an Integrated Curriculum in Physics, Mathematics, Engineering, and Chemistry

NASA Astrophysics Data System (ADS)

Beichner, Robert

1997-04-01

An experimental, student centered, introductory curriculum called IMPEC (for Integrated Mathematics, Physics, Engineering, and Chemistry curriculum) is in its third year of pilot-testing at NCSU. The curriculum is taught by a multidisciplinary team of professors using a combination of traditional lecturing and alternative instructional methods including cooperative learning, activity-based class sessions, and extensive use of computer modeling, simulations, and the world wide web. This talk will discuss the research basis for our design and implementation of the curriculum, the qualitative and quantitative methods we have been using to assess its effectiveness, and the educational outcomes we have noted so far.

The 1988 Directory of Educational Software Publishing Companies.

ERIC Educational Resources Information Center

Electronic Learning, 1988

1988-01-01

Based on questionnaires sent to educational software companies in January 1988, this directory lists 78 companies. Information given includes company address, curriculum subject areas for which the company publishes software, types of machines and operating systems on which the software operates, and grade level for which it is targeted. (LRW)

Integrating Engineering into Delaware's K-5 Classrooms: A Study of Pedagogical and Curricular Resources

ERIC Educational Resources Information Center

Grusenmeyer, Linda Huey

2017-01-01

This study examines the personal and curricular resources available to Delaware's elementary teachers during a time of innovative curriculum change, i.e., their knowledge, goals and beliefs regarding elementary engineering curriculum and the pedagogical support to teach two Science and Engineering Practices provided by science teaching materials.…

Construction Mechanic, Engine Tune-Up I, 8-7. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, teaches students to perform a complete engine tune-up using appropriate hand tools, special tools, and testing equipment. Students completing the course will be able to diagnose gasoline-engine performance and perform corrective measures to…

Science through Engineering in Elementary School: Comparing Three Enactments of an Engineering-Design-Based Curriculum on the Science of Sound

ERIC Educational Resources Information Center

Wendell, Kristen Bethke

2011-01-01

This research illustrates how varying enactments of an engineering-design-based science curriculum shaped the development of students' domain-specific scientific ideas and practices. In this comparative case study rooted in the analytical perspectives of activity theory and learning environments, student and teacher participants in three…

Integrating Surface Modeling into the Engineering Design Graphics Curriculum

ERIC Educational Resources Information Center

Hartman, Nathan W.

2006-01-01

It has been suggested there is a knowledge base that surrounds the use of 3D modeling within the engineering design process and correspondingly within engineering design graphics education. While solid modeling receives a great deal of attention and discussion relative to curriculum efforts, and rightly so, surface modeling is an equally viable 3D…

Response Strategies for Curriculum Change in Engineering

ERIC Educational Resources Information Center

Kolmos, Anette; Hadgraft, Roger G.; Holgaard, Jette Egelund

2016-01-01

During the last 25 years, there have been many calls for new engineering competencies and a corresponding gradual change in both curriculum and pedagogy in engineering education. This has been a global trend, in the US, Europe, Australia and now emerging in the rest of the world. Basically, there have been two main types of societal challenges…

A Learning Style Comparison between Synchronous Online and Face-to-Face Engineering Graphics Instruction

ERIC Educational Resources Information Center

Goodridge, Wade H.; Lawanto, Oenardi; Santoso, Harry B.

2017-01-01

The implementation of a successful engineering program to a synchronous online curriculum is subject to many impacting factors. One such factor, that has not seen much investigation, concerns learning styles. Student learning styles may have a dramatic influence on the success of a synchronous online deliverable engineering graphics curriculum.…

The Business Education Lab and Local Area Networking for Curriculum Improvement.

ERIC Educational Resources Information Center

Seals, Georgina; And Others

This guide explains how to incorporate a local area network (LAN) into the business education curriculum. The first section defines LAN, a communications system that links computers and other peripherals within an office or throughout nearby buildings and shares multiuser software and send and/or receive information. Curriculum planning…

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Groves, Paula; Valett, Jon

1990-01-01

An annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory is given. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: the Software Engineering Laboratory; the Software Engineering Laboratory-software development documents; software tools; software models; software measurement; technology evaluations; Ada technology; and data collection. Subject and author indexes further classify these documents by specific topic and individual author.

Annotated bibliography of Software Engineering Laboratory literature

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Valett, Jon

1993-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. Nearly 200 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: the Software Engineering Laboratory; the Software Engineering Laboratory: software development documents; software tools; software models; software measurement; technology evaluations; Ada technology; and data collection. This document contains an index of these publications classified by individual author.

Learning from Software Localization.

ERIC Educational Resources Information Center

Guo, She-Sen

2003-01-01

Localization is the process of adapting a product to meet the language, cultural and other requirements of a specific target environment or market. This article describes ways in which software localization impacts upon curriculum, and discusses what students will learn from software localization. (AEF)

42 CFR 86.13 - Project requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

...), a school of nursing, a school of public health or its equivalent, and a school of engineering or its... career categories, e.g., industrial toxicology, biostatistics, epidemiology, and ergonomics. Training... engineering, among others, by providing curriculum materials and consultation for curriculum/course...

Engine & Vehicle Mechanics Curriculum.

ERIC Educational Resources Information Center

Alaska State Dept. of Education, Juneau. Div. of Adult and Vocational Education.

This competency-based curriculum includes all competencies a student will acquire in an engine and vehicle mechanics educational program. It follows guidelines established for automobile technician training programs leading toward certification and addresses requirements of the National Institute for Automotive Service Excellence (ASE). The…

Final Technical Report: Hydrogen Energy in Engineering Education (H2E3)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lehman, Peter A.; Cashman, Eileen; Lipman, Timothy

2011-09-15

Schatz Energy Research Center's Hydrogen Energy in Engineering Education curriculum development project delivered hydrogen energy and fuel cell learning experiences to over 1,000 undergraduate engineering students at five California universities, provided follow-on internships for students at a fuel cell company; and developed commercializable hydrogen teaching tools including a fuel cell test station and a fuel cell/electrolyzer experiment kit. Monitoring and evaluation tracked student learning and faculty and student opinions of the curriculum, showing that use of the curriculum did advance student comprehension of hydrogen fundamentals. The project web site (hydrogencurriculum.org) provides more information.

Increasing student confidence in technical and professional skills through project based learning

NASA Astrophysics Data System (ADS)

Robinson, Alice L.

This work focuses on developing undergraduate students' technical and professional skills through a project-based spiral curriculum in the Agricultural & Biological Engineering department at Purdue that can be implemented campus wide. Through this curriculum, Purdue engineers will be prepared for leadership roles in responding to the global technological, economic, and societal challenges of the 21st century by exposure to the relationships between engineering and its impacts on real world needs and challenges. Project-based learning uses projects as the focus of instruction and has shown increased understanding, motivation, and confidence through application of engineering principles to real-world problems. The strength of a spiral curriculum is that it continually revisits basic ideas and themes with increasing complexity and sophistication. The proposed spiral curriculum incorporates the target attributes of the Purdue Engineer of 2020 through project based courses during sophomore, junior, and senior year. These courses will build on concepts taught during first year engineering as well. The Engineer of 2020 (NAE and Purdue) target attributes include strong technical and professional skills to solve societal and technological burdens. A prototype course has been developed, taught, and evaluated during the previous two fall semesters in the sophomore level of the Biological and Food Process Engineering curriculum. The target students met 3 hours a week in a traditional lecture setting plus 2 hours a week in a project based lab setting. The control group met only 3 hours a week in a traditional lecture setting. Peer and self assessment results from student surveys show increased confidence in every area surveyed. Focus groups revealed student reactions to the course. Students enjoyed the course but felt it difficult to handle ambiguity with project work. Future work includes course revisions to the content, assessment, and pedagogy of the prototype class, development of the remaining project courses in the curriculum, and increasing graduate student instruction in the courses to gain teaching and leadership experience.

Development of the electronic health records for nursing education (EHRNE) software program.

PubMed

Kowitlawakul, Yanika; Wang, Ling; Chan, Sally Wai-Chi

2013-12-01

This paper outlines preliminary research of an innovative software program that enables the use of an electronic health record in a nursing education curriculum. The software application program is called EHRNE, which stands for Electronic Heath Record for Nursing Education. The aim of EHRNE is to enhance student's learning of health informatics when they are working in the simulation laboratory. Integrating EHRNE into the nursing curriculum exposes students to electronic health records before they go into the workplace. A qualitative study was conducted using focus group interviews of nine nursing students. Nursing students' perceptions of using the EHRNE application were explored. The interviews were audio-taped and transcribed verbatim. The data was analyzed following the Colaizzi (1978) guideline. Four main categories that related to the EHRNE application were identified from the interviews: functionality, data management, timing and complexity, and accessibility. The analysis of the data revealed advantages and limitations of using EHRNE in the classroom setting. Integrating the EHRNE program into the curriculum will promote students' awareness of electronic documentation and enhance students' learning in the simulation laboratory. Preliminary findings suggested that before integrating the EHRNE program into the nursing curriculum, educational sessions for both students and faculty outlining the software's purpose, advantages, and limitations were needed. Following the educational sessions, further investigation of students' perceptions and learning using the EHRNE program is recommended. Copyright © 2012 Elsevier Ltd. All rights reserved.

Software Development for EECU Platform of Turbofan Engine

NASA Astrophysics Data System (ADS)

Kim, Bo Gyoung; Kwak, Dohyup; Kim, Byunghyun; Choi, Hee ju; Kong, Changduk

2017-04-01

The turbofan engine operation consists of a number of hardware and software. The engine is controlled by Electronic Engine Control Unit (EECU). In order to control the engine, EECU communicates with an aircraft system, Actuator Drive Unit (ADU), Engine Power Unit (EPU) and sensors on the engine. This paper tried to investigate the process form starting to taking-off and aims to design the EECU software mode and defined communication data format. The software is implemented according to the designed software mode.

Software engineering methodologies and tools

NASA Technical Reports Server (NTRS)

Wilcox, Lawrence M.

1993-01-01

Over the years many engineering disciplines have developed, including chemical, electronic, etc. Common to all engineering disciplines is the use of rigor, models, metrics, and predefined methodologies. Recently, a new engineering discipline has appeared on the scene, called software engineering. For over thirty years computer software has been developed and the track record has not been good. Software development projects often miss schedules, are over budget, do not give the user what is wanted, and produce defects. One estimate is there are one to three defects per 1000 lines of deployed code. More and more systems are requiring larger and more complex software for support. As this requirement grows, the software development problems grow exponentially. It is believed that software quality can be improved by applying engineering principles. Another compelling reason to bring the engineering disciplines to software development is productivity. It has been estimated that productivity of producing software has only increased one to two percent a year in the last thirty years. Ironically, the computer and its software have contributed significantly to the industry-wide productivity, but computer professionals have done a poor job of using the computer to do their job. Engineering disciplines and methodologies are now emerging supported by software tools that address the problems of software development. This paper addresses some of the current software engineering methodologies as a backdrop for the general evaluation of computer assisted software engineering (CASE) tools from actual installation of and experimentation with some specific tools.

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Kistler, David; Bristow, John; Smith, Don

1994-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. Nearly 200 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

An Innovative Project and Design Oriented Electrical Engineering Curriculum at the University of North Texas

ERIC Educational Resources Information Center

Garcia, Oscar N.; Varanasi, Murali R.; Acevedo, Miguel F.; Guturu, Parthasarathy

2011-01-01

We analyze and study the beginning of a new Electrical Engineering Department, supported by an NSF Departmental Level Reform award, within a new College of Engineering in the 21st Century and also describe the academic approach and influences of an innovative cognitive-based approach to curriculum development. In addition, the approach taken…

Model Wind Turbine Design in a Project-Based Middle School Engineering Curriculum Built on State Frameworks

ERIC Educational Resources Information Center

Cogger, Steven D.; Miley, Daniel H.

2012-01-01

This paper proposes that project-based active learning is a key part of engineering education at the middle school level. One project from a comprehensive middle school engineering curriculum developed by the authors is described to show how active learning and state frameworks can coexist. The theoretical basis for learning and assessment in a…

Software Engineering Improvement Activities/Plan

NASA Technical Reports Server (NTRS)

2003-01-01

bd Systems personnel accomplished the technical responsibilities for this reporting period, as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED14). Work accomplishments included development, evaluation, and enhancement of a software cost model, performing literature search and evaluation of software tools available for code analysis and requirements analysis, and participating in other relevant software engineering activities. Monthly reports were submitted. This support was provided to the Flight Software Group/ED 1 4 in accomplishing the software engineering improvement engineering activities of the Marshall Space Flight Center (MSFC) Software Engineering Improvement Plan.

Aerospace engineering educational program

NASA Technical Reports Server (NTRS)

Craft, William; Klett, David; Lai, Steven

1992-01-01

The principle goal of the educational component of NASA CORE is the creation of aerospace engineering options in the mechanical engineering program at both the undergraduate and graduate levels. To accomplish this goal, a concerted effort during the past year has resulted in detailed plans for the initiation of aerospace options in both the BSME and MSME programs in the fall of 1993. All proposed new courses and the BSME aerospace option curriculum must undergo a lengthy approval process involving two cirriculum oversight committees (School of Engineering and University level) and three levels of general faculty approval. Assuming approval is obtained from all levels, the options will officially take effect in Fall '93. In anticipation of this, certain courses in the proposed curriculum are being offered during the current academic year under special topics headings so that current junior level students may graduate in May '94 under the BSME aerospace option. The proposed undergraduate aerospace option curriculum (along with the regular mechanical engineering curriculum for reference) is attached at the end of this report, and course outlines for the new courses are included in the appendix.

The Impact of Technology-Enhanced Curriculum on Learning Advanced Algebra in US High School Classrooms

ERIC Educational Resources Information Center

Hegedus, Stephen J.; Dalton, Sara; Tapper, John R.

2015-01-01

We report on two large studies conducted in advanced algebra classrooms in the US, which evaluated the effect of replacing traditional algebra 2 curriculum with an integrated suite of dynamic interactive software, wireless networks and technology-enhanced curriculum on student learning. The first study was a cluster randomized trial and the second…

Engineering bioinformatics: building reliability, performance and productivity into bioinformatics software.

PubMed

Lawlor, Brendan; Walsh, Paul

2015-01-01

There is a lack of software engineering skills in bioinformatic contexts. We discuss the consequences of this lack, examine existing explanations and remedies to the problem, point out their shortcomings, and propose alternatives. Previous analyses of the problem have tended to treat the use of software in scientific contexts as categorically different from the general application of software engineering in commercial settings. In contrast, we describe bioinformatic software engineering as a specialization of general software engineering, and examine how it should be practiced. Specifically, we highlight the difference between programming and software engineering, list elements of the latter and present the results of a survey of bioinformatic practitioners which quantifies the extent to which those elements are employed in bioinformatics. We propose that the ideal way to bring engineering values into research projects is to bring engineers themselves. We identify the role of Bioinformatic Engineer and describe how such a role would work within bioinformatic research teams. We conclude by recommending an educational emphasis on cross-training software engineers into life sciences, and propose research on Domain Specific Languages to facilitate collaboration between engineers and bioinformaticians.

Engineering bioinformatics: building reliability, performance and productivity into bioinformatics software

PubMed Central

Lawlor, Brendan; Walsh, Paul

2015-01-01

There is a lack of software engineering skills in bioinformatic contexts. We discuss the consequences of this lack, examine existing explanations and remedies to the problem, point out their shortcomings, and propose alternatives. Previous analyses of the problem have tended to treat the use of software in scientific contexts as categorically different from the general application of software engineering in commercial settings. In contrast, we describe bioinformatic software engineering as a specialization of general software engineering, and examine how it should be practiced. Specifically, we highlight the difference between programming and software engineering, list elements of the latter and present the results of a survey of bioinformatic practitioners which quantifies the extent to which those elements are employed in bioinformatics. We propose that the ideal way to bring engineering values into research projects is to bring engineers themselves. We identify the role of Bioinformatic Engineer and describe how such a role would work within bioinformatic research teams. We conclude by recommending an educational emphasis on cross-training software engineers into life sciences, and propose research on Domain Specific Languages to facilitate collaboration between engineers and bioinformaticians. PMID:25996054

Sustainability in Chemical Engineering Curriculum

ERIC Educational Resources Information Center

Glassey, Jarka; Haile, Sue

2012-01-01

Purpose: The purpose of this paper is to describe a concentrated strategy to embed sustainability teaching into a (chemical) engineering undergraduate curriculum throughout the whole programme. Innovative teaching approaches in subject-specific context are described and their efficiency investigated. Design/methodology/approach: The activities in…

Software Engineering for Human Spaceflight

NASA Technical Reports Server (NTRS)

Fredrickson, Steven E.

2014-01-01

The Spacecraft Software Engineering Branch of NASA Johnson Space Center (JSC) provides world-class products, leadership, and technical expertise in software engineering, processes, technology, and systems management for human spaceflight. The branch contributes to major NASA programs (e.g. ISS, MPCV/Orion) with in-house software development and prime contractor oversight, and maintains the JSC Engineering Directorate CMMI rating for flight software development. Software engineering teams work with hardware developers, mission planners, and system operators to integrate flight vehicles, habitats, robotics, and other spacecraft elements. They seek to infuse automation and autonomy into missions, and apply new technologies to flight processor and computational architectures. This presentation will provide an overview of key software-related projects, software methodologies and tools, and technology pursuits of interest to the JSC Spacecraft Software Engineering Branch.

Software engineering from a Langley perspective

NASA Technical Reports Server (NTRS)

Voigt, Susan

1994-01-01

A brief introduction to software engineering is presented. The talk is divided into four sections beginning with the question 'What is software engineering', followed by a brief history of the progression of software engineering at the Langley Research Center in the context of an expanding computing environment. Several basic concepts and terms are introduced, including software development life cycles and maturity levels. Finally, comments are offered on what software engineering means for the Langley Research Center and where to find more information on the subject.

The need for scientific software engineering in the pharmaceutical industry

NASA Astrophysics Data System (ADS)

Luty, Brock; Rose, Peter W.

2017-03-01

Scientific software engineering is a distinct discipline from both computational chemistry project support and research informatics. A scientific software engineer not only has a deep understanding of the science of drug discovery but also the desire, skills and time to apply good software engineering practices. A good team of scientific software engineers can create a software foundation that is maintainable, validated and robust. If done correctly, this foundation enable the organization to investigate new and novel computational ideas with a very high level of efficiency.

The need for scientific software engineering in the pharmaceutical industry.

PubMed

Luty, Brock; Rose, Peter W

2017-03-01

Scientific software engineering is a distinct discipline from both computational chemistry project support and research informatics. A scientific software engineer not only has a deep understanding of the science of drug discovery but also the desire, skills and time to apply good software engineering practices. A good team of scientific software engineers can create a software foundation that is maintainable, validated and robust. If done correctly, this foundation enable the organization to investigate new and novel computational ideas with a very high level of efficiency.

Engineering Technology Programs. Preliminary Curriculum Planning Guide.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Developed as a resource to assist in a major revision underway in Georgia area technical schools to change curricula for preparing engineering technicians, this preliminary program-planning guide describes curriculum structures for specialized programs in three major areas--electronics, electromechanics, and mechanics. The handbook, which is…

Maintaining Small Engines. Vocational Preparation Curriculum.

ERIC Educational Resources Information Center

Herd, Amon

Intended for instructors serving the occupational needs of disadvantaged and handicapped students, this curriculum guide contains 16 units for a small engine maintenance program. Its purposes are to provide minimum skills of students already mainstreamed, and provide vocational instructional materials for the modified classroom. Teachers should…

Experimentation in software engineering

NASA Technical Reports Server (NTRS)

Basili, V. R.; Selby, R. W.; Hutchens, D. H.

1986-01-01

Experimentation in software engineering supports the advancement of the field through an iterative learning process. In this paper, a framework for analyzing most of the experimental work performed in software engineering over the past several years is presented. A variety of experiments in the framework is described and their contribution to the software engineering discipline is discussed. Some useful recommendations for the application of the experimental process in software engineering are included.

Computer Center: Software Review: The DynaPulse 200M.

ERIC Educational Resources Information Center

Pankiewicz, Philip R., Ed.

1995-01-01

Reviews the DynaPulse 200M Education Edition microcomputer-based laboratory, which combines interactive software with curriculum and medical instrumentation to teach students about the cardiovascular system. (MKR)

Developing a Consensus-Driven, Core Competency Model to Shape Future Audio Engineering Technology Curriculum: A Web-Based Modified Delphi Study

ERIC Educational Resources Information Center

Tough, David T.

2009-01-01

The purpose of this online study was to create a ranking of essential core competencies and technologies required by AET (audio engineering technology) programs 10 years in the future. The study was designed to facilitate curriculum development and improvement in the rapidly expanding number of small to medium sized audio engineering technology…

Design of the Curriculum for a Second-Cycle Course in Civil Engineering in the Context of the Bologna Framework

ERIC Educational Resources Information Center

Gavin, K. G.

2010-01-01

This paper describes the design of the curriculum for a Master of Engineering programme in civil engineering at University College Dublin. The revised programme was established to meet the requirements of the Bologna process and this paper specifically considers the design of a new, second-cycle master's component of the programme. In addition to…

SAGA: A project to automate the management of software production systems

NASA Technical Reports Server (NTRS)

Campbell, Roy H.; Beckman-Davies, C. S.; Benzinger, L.; Beshers, G.; Laliberte, D.; Render, H.; Sum, R.; Smith, W.; Terwilliger, R.

1986-01-01

Research into software development is required to reduce its production cost and to improve its quality. Modern software systems, such as the embedded software required for NASA's space station initiative, stretch current software engineering techniques. The requirements to build large, reliable, and maintainable software systems increases with time. Much theoretical and practical research is in progress to improve software engineering techniques. One such technique is to build a software system or environment which directly supports the software engineering process, i.e., the SAGA project, comprising the research necessary to design and build a software development which automates the software engineering process. Progress under SAGA is described.

Influence of Science, Technology, and Engineering Curriculum on Rural Midwestern High School Student Career Decisions

NASA Astrophysics Data System (ADS)

Killingsworth, John

Low degree completion in technical and engineering degrees is a growing concern for policymakers and educators in the United States. This study was an examination of the behaviors of adolescents specific to career decisions related to technology and engineering. The central research question for this study was: do rural, Midwestern high school technical and engineering curricula serve to engage students sufficiently to encourage them to persist through high school while sustaining their interests in technology and engineering careers? Engaging students in technology and engineering fields is the challenge for educators throughout the country and the Midwest. Rural schools have the additional challenge of meeting those issues because of resource limitations. Students in three Midwestern schools were surveyed to determine the level of interest in technology and engineering. The generalized likelihood ratio test was used to overcome concerns for small sample sizes. Accounting for dependent variables, multiple independent variables are examined using descriptive statistics to determine which have greater influence on career decisions, specifically those related to technology and engineering. A typical science curriculum is defined for rural Midwestern high schools. This study concludes that such curriculum achieves the goal of maintaining or increasing student interest and engagement in STEM careers. Furthermore, those schools that incorporate contextual and experiential learning activities into the curriculum demonstrate increased results in influencing student career choices toward technology and engineering careers. Implications for parents, educators, and industry professionals are discussed.

Software development environments: Status and trends

NASA Technical Reports Server (NTRS)

Duffel, Larry E.

1988-01-01

Currently software engineers are the essential integrating factors tying several components together. The components consist of process, methods, computers, tools, support environments, and software engineers. The engineers today empower the tools versus the tools empowering the engineers. Some of the issues in software engineering are quality, managing the software engineering process, and productivity. A strategy to accomplish this is to promote the evolution of software engineering from an ad hoc, labor intensive activity to a managed, technology supported discipline. This strategy may be implemented by putting the process under management control, adopting appropriate methods, inserting the technology that provides automated support for the process and methods, collecting automated tools into an integrated environment and educating the personnel.

Teaching and assessment of mathematical principles for software correctness using a reasoning concept inventory

NASA Astrophysics Data System (ADS)

Drachova-Strang, Svetlana V.

As computing becomes ubiquitous, software correctness has a fundamental role in ensuring the safety and security of the systems we build. To design and develop software correctly according to their formal contracts, CS students, the future software practitioners, need to learn a critical set of skills that are necessary and sufficient for reasoning about software correctness. This dissertation presents a systematic approach to both introducing these reasoning skills into the curriculum, and assessing how well the students have learned them. Specifically, it introduces a comprehensive Reasoning Concept Inventory (RCI) that captures the fine details of basic reasoning skills that are ideally learned across the undergraduate curriculum to reason about software correctness, to develop high quality software, and to understand why software works as specified. The RCI forms the basis for developing learning outcomes that help educators to assess the adequacy of current techniques and pinpoint necessary improvements. This dissertation contains results from experimentation and assessment over the past few years in multiple CS courses. The results show that the finer principles of mathematical reasoning of software correctness can be taught effectively and continuously improved with the help of the RCI using suitable teaching practices, and supporting methods and tools.

Evaluating Business Intelligence/Business Analytics Software for Use in the Information Systems Curriculum

ERIC Educational Resources Information Center

Davis, Gary Alan; Woratschek, Charles R.

2015-01-01

Business Intelligence (BI) and Business Analytics (BA) Software has been included in many Information Systems (IS) curricula. This study surveyed current and past undergraduate and graduate students to evaluate various BI/BA tools. Specifically, this study compared several software tools from two of the major software providers in the BI/BA field.…

Comprehensive Small Engine Repair.

ERIC Educational Resources Information Center

Hires, Bill; And Others

This curriculum guide contains the basic information needed to repair all two- and four-stroke cycle engines. The curriculum covers four areas, each consisting of one or more units of instruction that include performance objectives, suggested activities for teacher and students, information sheets, assignment sheets, job sheets, visual aids,…

Mathematics in Technology & Engineering Education: Judgments of Grade-Level Appropriateness

ERIC Educational Resources Information Center

Flowers, Jim; Rose, Mary Annette

2014-01-01

Technology and engineering (TE) educators have long championed the infusion of mathematics into technology curriculum, especially to enhance TE learning goals and demonstrate "connections between technology and other fields of study." There is a need for curriculum development and professional development initiatives to purposefully…

Viewpoint: The Time Has Come for the B.S. in Astronautical Engineering.

ERIC Educational Resources Information Center

Brodsky, R. F.

1985-01-01

Argues in favor of establishing an accreditable curriculum in "pure" astronautical engineering (leading to a bachelor of science degree in this field), giving reasons why such reform is needed (including equating "astronautics" with "aeronautics") and why a new curriculum is needed. (JN)

Humanitarian Engineering Placements in Our Own Communities

ERIC Educational Resources Information Center

VanderSteen, J. D. J.; Hall, K. R.; Baillie, C. A.

2010-01-01

There is an increasing interest in the humanitarian engineering curriculum, and a service-learning placement could be an important component of such a curriculum. International placements offer some important pedagogical advantages, but also have some practical and ethical limitations. Local community-based placements have the potential to be…

Proceedings of Tenth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1985-01-01

Papers are presented on the following topics: measurement of software technology, recent studies of the Software Engineering Lab, software management tools, expert systems, error seeding as a program validation technique, software quality assurance, software engineering environments (including knowledge-based environments), the Distributed Computing Design System, and various Ada experiments.

The Educational Software Design and Evaluation for K-8: Oral and Dental Health Software

ERIC Educational Resources Information Center

Kabakci, Isil; Birinci, Gurkay; Izmirli, Serkan

2007-01-01

The aim of this study is to inform about the development of the software "Oral and Dental Health" that will supplement the course of Science and Technology for K8 students in the primary school curriculum and to carry out an evaluation study of the software. This software has been prepared for educational purposes. In relation to the…

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Buhler, Melanie; Valett, Jon

1989-01-01

An annotated bibliography is presented of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. The bibliography was updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials were grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. Subject and author indexes further classify these documents by specific topic and individual author.

In the soft-to-hard technical spectrum: Where is software engineering?

NASA Technical Reports Server (NTRS)

Leibfried, Theodore F.; Macdonald, Robert B.

1992-01-01

In the computer journals and tabloids, there have been a plethora of articles written about the software engineering field. But while advocates of the need for an engineering approach to software development, it is impressive how many authors have treated the subject of software engineering without adequately addressing the fundamentals of what engineering as a discipline consists of. A discussion is presented of the various related facets of this issue in a logical framework to advance the thesis that the software development process is necessarily an engineering process. The purpose is to examine more of the details of the issue of whether or not the design and development of software for digital computer processing systems should be both viewed and treated as a legitimate field of professional engineering. Also, the type of academic and professional level education programs that would be required to support a software engineering discipline is examined.

Software Engineering Education Directory

DTIC Science & Technology

1990-04-01

and Engineering (CMSC 735) Codes: GPEV2 * Textiooks: IEEE Tutoria on Models and Metrics for Software Management and Engameeing by Basi, Victor R...Software Engineering (Comp 227) Codes: GPRY5 Textbooks: IEEE Tutoria on Software Design Techniques by Freeman, Peter and Wasserman, Anthony 1. Software

Academic Web Authoring Mulitmedia Development and Course Management Tools

ERIC Educational Resources Information Center

Halloran, Margaret E.

2005-01-01

Course management software enables faculty members to learn one software package for web-based curriculum, assessment, synchronous and asynchronous discussions, collaborative work, multimedia and interactive resource development. There are as many as 109 different course management software packages on the market and several studies have evaluated…

The research and practice of spacecraft software engineering

NASA Astrophysics Data System (ADS)

Chen, Chengxin; Wang, Jinghua; Xu, Xiaoguang

2017-06-01

In order to ensure the safety and reliability of spacecraft software products, it is necessary to execute engineering management. Firstly, the paper introduces the problems of unsystematic planning, uncertain classified management and uncontinuous improved mechanism in domestic and foreign spacecraft software engineering management. Then, it proposes a solution for software engineering management based on system-integrated ideology in the perspective of spacecraft system. Finally, a application result of spacecraft is given as an example. The research can provides a reference for executing spacecraft software engineering management and improving software product quality.

Comparison of engagement with ethics between an engineering and a business program.

PubMed

Culver, Steven M; Puri, Ishwar K; Wokutch, Richard E; Lohani, Vinod

2013-06-01

Increasing university students' engagement with ethics is becoming a prominent call to action for higher education institutions, particularly professional schools like business and engineering. This paper provides an examination of student attitudes regarding ethics and their perceptions of ethics coverage in the curriculum at one institution. A particular focus is the comparison between results in the business college, which has incorporated ethics in the curriculum and has been involved in ethics education for a longer period, with the engineering college, which is in the nascent stages of developing ethics education in its courses. Results show that student attitudes and perceptions are related to the curriculum. In addition, results indicate that it might be useful for engineering faculty to use business faculty as resources in the development of their ethics curricula.

Data systems and computer science: Software Engineering Program

NASA Technical Reports Server (NTRS)

Zygielbaum, Arthur I.

1991-01-01

An external review of the Integrated Technology Plan for the Civil Space Program is presented. This review is specifically concerned with the Software Engineering Program. The goals of the Software Engineering Program are as follows: (1) improve NASA's ability to manage development, operation, and maintenance of complex software systems; (2) decrease NASA's cost and risk in engineering complex software systems; and (3) provide technology to assure safety and reliability of software in mission critical applications.

Modeling software systems by domains

NASA Technical Reports Server (NTRS)

Dippolito, Richard; Lee, Kenneth

1992-01-01

The Software Architectures Engineering (SAE) Project at the Software Engineering Institute (SEI) has developed engineering modeling techniques that both reduce the complexity of software for domain-specific computer systems and result in systems that are easier to build and maintain. These techniques allow maximum freedom for system developers to apply their domain expertise to software. We have applied these techniques to several types of applications, including training simulators operating in real time, engineering simulators operating in non-real time, and real-time embedded computer systems. Our modeling techniques result in software that mirrors both the complexity of the application and the domain knowledge requirements. We submit that the proper measure of software complexity reflects neither the number of software component units nor the code count, but the locus of and amount of domain knowledge. As a result of using these techniques, domain knowledge is isolated by fields of engineering expertise and removed from the concern of the software engineer. In this paper, we will describe kinds of domain expertise, describe engineering by domains, and provide relevant examples of software developed for simulator applications using the techniques.

European virtual campus for biomedical engineering EVICAB.

PubMed

Malmivuo, Jaakko A; Nousiainen, Juha O; Lindroos, Kari V

2007-01-01

European Commission has funded building a curriculum on Biomedical Engineering to the Internet for European universities under the project EVICAB. EVICAB forms a curriculum which will be free access and available free of charge. Therefore, in addition to the European universities, it will be available worldwide. EVICAB will make high quality education available for everyone, not only for the university students, and facilitate the development of the discipline of Biomedical Engineering.

Rationale for Incorporating Health and Safety into the Curriculum.

ERIC Educational Resources Information Center

Fleischman, Marvin

1988-01-01

Presents a philosophical commentary on the need and rationale for incorporating safety and health into the chemical engineering curriculum. Proposes safety and health assessments as useful teaching methods. Describes an approach to bringing safety and health into undergraduate engineering curricula. Gives examples of integration of these curricula…

Turboprop Propulsion Mechanic 2-8. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

These military-developed curriculum materials for turboprop propulsion mechanics are targeted for use in grades 11-adult. Organized in five instructional blocks, the materials deal with the following topics: fundamentals of turboprop propulsion mechanics; engine and propeller systems operation; propeller maintenance; engine repair; and engine…

Adaptive Core Requirements for an Ever Changing Electrical Engineering Curriculum.

ERIC Educational Resources Information Center

Daneshvar, K.; Tranjan, F. M.

Although in the liberal arts the main concern is comprehensive education, it is generally accepted that an engineering curriculum, while providing the fundamentals, can change continuously to accommodate technological, industrial, and economical interests. Meanwhile, in recent years many new forms of learning have been proposed that are quite…

Bringing Knowledge Management into an Engineering Curriculum

ERIC Educational Resources Information Center

Winberg, S. L.; Schach, S. R.; Inggs, M. R.

2007-01-01

The use of effective knowledge management is becoming an essential part of technical development projects in order to enable developers to handle the growing complexity of these projects. In this article we discuss an innovative approach to address this concern from the perspective of an undergraduate engineering curriculum. Instead of adding…

Engineering Curriculum as Affected by Corporate Giving.

ERIC Educational Resources Information Center

Pettigrew, Chenits, Jr.; Hiatt, Diana Buell

This study investigated the effects of corporate financial support on the University of California Los Angeles (UCLA) School of Engineering and Applied Sciences (SEAS) curriculum. The study evolved out of growing concerns that many university educators have related to the mushrooming of university efforts to secure corporate financial support…

Creating meaningful learning experiences: Understanding students' perspectives of engineering design

NASA Astrophysics Data System (ADS)

Aleong, Richard James Chung Mun

There is a societal need for design education to prepare holistic engineers with the knowledge, skills, and attitudes to innovate and compete globally. Design skills are paramount to the espoused values of higher education, as institutions of higher learning strive to develop in students the cognitive abilities of critical thinking, problem solving, and creativity. To meet these interests from industry and academia, it is important to advance the teaching and learning of engineering design. This research aims to understand how engineering students learn and think about design, as a way for engineering educators to optimize instructional practice and curriculum development. Qualitative research methodology was used to investigate the meaning that engineering students' ascribe to engineering design. The recruitment of participants and corresponding collection of data occurred in two phases using two different data collection techniques. The first phase involved the distribution of a one-time online questionnaire to all first year, third year, and fourth year undergraduate engineering students at three Canadian Universities. After the questionnaire, students were asked if they would be willing to participate in the second phase of data collection consisting of a personal interview. A total of ten students participated in interviews. Qualitative data analysis procedures were conducted on students' responses from the questionnaire and interviews. The data analysis process consisted of two phases: a descriptive phase to code and categorize the data, followed by an interpretative phase to generate further meaning and relationships. The research findings present a conceptual understanding of students' descriptions about engineering design, structured within two educational orientations: a learning studies orientation and a curriculum studies orientation. The learning studies orientation captured three themes of students' understanding of engineering design: awareness, relevance, and transfer. With this framework of student learning, engineering educators can enhance learning experiences by engaging all three levels of students' understanding. The curriculum studies orientation applied the three holistic elements of curriculum---subject matter, society, and the individual---to conceptualize design considerations for engineering curriculum and teaching practice. This research supports the characterization of students' learning experiences to help educators and students optimize their teaching and learning of design education.

Mechatronics: the future of mechanical engineering; past, present, and a vision for the future

NASA Astrophysics Data System (ADS)

Ramasubramanian, M. K.

2001-08-01

Mechatronics is the synergistic integration of precision mechanical engineering, electronics, computational hardware and software in the design of products and processes. Mechatronics, the term coined in Japan in the '70s, has evolved to symbolize what mechanical design engineers do today worldwide. The revolutionary introduction of the microprocessor (or microcontroller) in the early '80s and ever increasing performance-cost ratio has changed the paradigm of mechanical design forever, and has broadened the original definition of mechatronics to include intelligent control and autonomous decision-making. Today, increasing number of new products is being developed at the intersection between traditional disciplines of Engineering, and Computer and Material Sciences. New developments in these traditional disciplines are being absorbed into mechatronics design at an ever-increasing pace. In this paper, a brief history of mechatronics, and several examples of this rapid adaptation of technologies into product design is presented. With the ongoing information technology revolution, especially in wireless communication, smart sensors design (enabled by MEMS technology), and embedded systems engineering, mechatronics design is going through another step change in capabilities and scope. The implications of these developments in mechatronics design in the near future are discussed. Finally, deficiencies in our engineering curriculum to address the needs of the industry to cope up with these rapid changes, and proposed remedies, will also be discussed.

Modular Rocket Engine Control Software (MRECS)

NASA Technical Reports Server (NTRS)

Tarrant, C.; Crook, J.

1998-01-01

The Modular Rocket Engine Control Software (MRECS) Program is a technology demonstration effort designed to advance the state-of-the-art in launch vehicle propulsion systems. Its emphasis is on developing and demonstrating a modular software architecture for advanced engine control systems that will result in lower software maintenance (operations) costs. It effectively accommodates software requirement changes that occur due to hardware technology upgrades and engine development testing. Ground rules directed by MSFC were to optimize modularity and implement the software in the Ada programming language. MRECS system software and the software development environment utilize Commercial-Off-the-Shelf (COTS) products. This paper presents the objectives, benefits, and status of the program. The software architecture, design, and development environment are described. MRECS tasks are defined and timing relationships given. Major accomplishments are listed. MRECS offers benefits to a wide variety of advanced technology programs in the areas of modular software architecture, reuse software, and reduced software reverification time related to software changes. MRECS was recently modified to support a Space Shuttle Main Engine (SSME) hot-fire test. Cold Flow and Flight Readiness Testing were completed before the test was cancelled. Currently, the program is focused on supporting NASA MSFC in accomplishing development testing of the Fastrac Engine, part of NASA's Low Cost Technologies (LCT) Program. MRECS will be used for all engine development testing.

Teaching Agile Software Engineering Using Problem-Based Learning

ERIC Educational Resources Information Center

El-Khalili, Nuha H.

2013-01-01

Many studies have reported the utilization of Problem-Based Learning (PBL) in teaching Software Engineering courses. However, these studies have different views of the effectiveness of PBL. This paper presents the design of an Advanced Software Engineering course for undergraduate Software Engineering students that uses PBL to teach them Agile…

Software Engineering Frameworks: Textbooks vs. Student Perceptions

ERIC Educational Resources Information Center

McMaster, Kirby; Hadfield, Steven; Wolthuis, Stuart; Sambasivam, Samuel

2012-01-01

This research examines the frameworks used by Computer Science and Information Systems students at the conclusion of their first semester of study of Software Engineering. A questionnaire listing 64 Software Engineering concepts was given to students upon completion of their first Software Engineering course. This survey was given to samples of…

Development of an Aviation Maintenance Curriculum in an Aerospace Engineering Department.

ERIC Educational Resources Information Center

Miau, Jiun-Jih; Chiu, Huei-Huang; Wu, Yuh-Yi; Lin, Chin-E; Choi, Siu-Tong; Yang, Shih-Ming; Jenq, Syh-Tsang

This paper describes the motivation of developing the Aviation Maintenance Curriculum, at National Chang Kung University (seven elective courses) contents of the elective courses, and university-industry collaborations developed along with the Curriculum. The curriculum represents an effort to respond to the needs of manpower in the aviation…

Curriculum optimization of College of Optical Science and Engineering

NASA Astrophysics Data System (ADS)

Wang, Xiaoping; Zheng, Zhenrong; Wang, Kaiwei; Zheng, Xiaodong; Ye, Song; Zhu, Yuhui

2017-08-01

The optimized curriculum of College of Optical Science and Engineering is accomplished at Zhejiang University, based on new trends from both research and industry. The curriculum includes general courses, foundation courses such as mathematics and physics, major core courses, laboratory courses and several module courses. Module courses include optical system designing, optical telecommunication, imaging and vision, electronics and computer science, optoelectronic sensing and metrology, optical mechanics and materials, basics and extension. These curricula reflect the direction of latest researches and relates closely with optoelectronics. Therefore, students may combine flexibly compulsory courses with elective courses, and establish the personalized curriculum of "optoelectronics + X", according to their individual strengths and preferences.

Curriculum design and German student exchange for Sino-German Bachelor program majored in optoelectronics engineering

NASA Astrophysics Data System (ADS)

Zheng, Jihong; Fuhrmann, Thomas; Xu, Boqing; Schreiner, Rupert; Jia, Hongzhi; Zhang, Wei; Wang, Ning; Seebauer, Gudrun; Zhu, Jiyan

2017-08-01

Different higher education backgrounds in China and Germany led to challenges in the curriculum design at the beginning of our cooperative bachelor program in Optoelectronics Engineering. We see challenges in different subject requirements from both sides and in the German language requirements for Chinese students. The curriculum was optimized according to the ASIIN criteria, which makes it acceptable and understandable by both countries. German students are integrated into the Chinese class and get the same lectures like their Chinese colleagues. Intercultural and curriculum challenges are successfully solved. The results are summarized to provide an example for other similar international programs.

Have More Fun Teaching Physics: Simulating, Stimulating Software.

ERIC Educational Resources Information Center

Jenkins, Doug

1996-01-01

High school physics offers opportunities to use problem solving and lab practices as well as cement skills in research, technical writing, and software applications. Describes and evaluates computer software enhancing the high school physics curriculum including spreadsheets for laboratory data, all-in-one simulators, projectile motion simulators,…

Development cooperation as methodology for teaching social responsibility to engineers

NASA Astrophysics Data System (ADS)

Lappalainen, Pia

2011-12-01

The role of engineering in promoting global well-being has become accentuated, turning the engineering curriculum into a means of dividing well-being equally. The gradual fortifying calls for humanitarian engineering have resulted in the incorporation of social responsibility themes in the university curriculum. Cooperation, communication, teamwork, intercultural cooperation, sustainability, social and global responsibility represent the socio-cultural dimensions that are becoming increasingly important as globalisation intensifies the demands for socially and globally adept engineering communities. This article describes an experiment, the Development Cooperation Project, which was conducted at Aalto University in Finland to integrate social responsibility themes into higher engineering education.

Change is necessary in a biological engineering curriculum.

PubMed

Johnson, Arthur T; Montas, Hubert; Shirmohammadi, Adel; Wheaton, Fredrick W

2006-01-01

Success of a Biological Engineering undergraduate educational program can be measured in a number of ways, but however it is measured, a presently successful program can translate into an unsuccessful program if it cannot adjust to different conditions posed by technical advances, student characteristics, and academic pressures. Described in this paper is a Biological Engineering curriculum that has changed significantly since its transformation from Agricultural Engineering in 1993. As a result, student numbers have continued to climb, specific objectives have emerged, and unique courses have been developed. The Biological Resources Engineering program has evolved into a program that emphasizes breadth, fundamentals, communications skills, diversity, and practical engineering judgment.

Sense and Sensibility: The Case for the Nationwide Inclusion of Engineering in the K-12 Curriculum

NASA Technical Reports Server (NTRS)

Lindberg, Robert E.; Pinelli, Thomas E.; Batterson, James G.

2008-01-01

The competitive status of the United States is inextricably linked to innovation just as innovation is inseparable from science, technology, engineering, and mathematics. To stay competitive in innovation requires that the United States produce a 21st century workforce complete with requisite education, training, skills, and motivation. If we accept a priori that science, technology, engineering, and mathematics education are crucial to competitiveness and innovation and that, in terms of innovation, mathematics, science, and engineering are interdependent, why are mathematics and science uniformly ubiquitous in the K-12 curriculum while engineering is conspicuously absent? We are passionate in our belief that the uniform addition of engineering to the K-12 curriculum will help ensure that the nation has "the right" 21st Century workforce. Furthermore, we believe that a nationwide effort, led by a coalition of engineering academics, practitioners, and societies is required to turn this goal into reality. However, accomplishing this goal necessitates, as we are reminded by the title of Jane Austen's timeless novel, "Sense and Sensibility", a workable solution that seeks the "middle ground" between passion and reason. We begin our paper by making two essential points: Engineers are not scientists. Engineering exists separate from science, has its own specialized knowledge community apart from science, and it is largely responsible for many of the most significant advancements and improvements in the quality of our life. Our workable solution requires that K-12 education, nationwide, accommodate the inclusion of engineering as a stand alone curriculum and we offer three reasons to support our position: (1) workforce development, (2) stimulating interest in STEM (science, technology, engineering, and mathematics) courses and careers, and (3) creating a technologically literate society. We conclude with some thoughts on how this important goal can be accomplished.

Performing Verification and Validation in Reuse-Based Software Engineering

NASA Technical Reports Server (NTRS)

Addy, Edward A.

1999-01-01

The implementation of reuse-based software engineering not only introduces new activities to the software development process, such as domain analysis and domain modeling, it also impacts other aspects of software engineering. Other areas of software engineering that are affected include Configuration Management, Testing, Quality Control, and Verification and Validation (V&V). Activities in each of these areas must be adapted to address the entire domain or product line rather than a specific application system. This paper discusses changes and enhancements to the V&V process, in order to adapt V&V to reuse-based software engineering.

Case Studies for Enhancing Student Engagement and Active Learning in Software V&V Education

ERIC Educational Resources Information Center

Manohar, Priyadarshan A.; Acharya, Sushil; Wu, Peter; Hansen, Mary; Ansari, Ali; Schilling, Walter

2015-01-01

Two critical problems facing the software (S/W) industry today are the lack of appreciation of the full benefits that can be derived from Software Verification and Validation (V&V) and an associated problem of shortage of adequately trained V&V practitioners. To address this situation, the software V&V course curriculum at the author's…

I CAN Learn[R] Pre-Algebra and Algebra. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2009

2009-01-01

The I CAN Learn[R] Education System is an interactive, self-paced, mastery-based software system that includes the I CAN Learn[R] Fundamentals of Math (5th-6th grade math) curriculum, the I CAN Learn[R] Pre-Algebra curriculum, and the I CAN Learn[R] Algebra curriculum. College algebra credit is also available to students in participating schools…

The Many Faces of a Software Engineer in a Research Community

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marinovici, Maria C.; Kirkham, Harold

2013-10-14

The ability to gather, analyze and make decisions based on real world data is changing nearly every field of human endeavor. These changes are particularly challenging for software engineers working in a scientific community, designing and developing large, complex systems. To avoid the creation of a communications gap (almost a language barrier), the software engineers should possess an ‘adaptive’ skill. In the science and engineering research community, the software engineers must be responsible for more than creating mechanisms for storing and analyzing data. They must also develop a fundamental scientific and engineering understanding of the data. This paper looks atmore » the many faces that a software engineer should have: developer, domain expert, business analyst, security expert, project manager, tester, user experience professional, etc. Observations made during work on a power-systems scientific software development are analyzed and extended to describe more generic software development projects.« less

Collected software engineering papers, volume 2

NASA Technical Reports Server (NTRS)

1983-01-01

Topics addressed include: summaries of the software engineering laboratory (SEL) organization, operation, and research activities; results of specific research projects in the areas of resource models and software measures; and strategies for data collection for software engineering research.

Managing the Software Development Process

NASA Technical Reports Server (NTRS)

Lubelczky, Jeffrey T.; Parra, Amy

1999-01-01

The goal of any software development project is to produce a product that is delivered on time, within the allocated budget, and with the capabilities expected by the customer and unfortunately, this goal is rarely achieved. However, a properly managed project in a mature software engineering environment can consistently achieve this goal. In this paper we provide an introduction to three project success factors, a properly managed project, a competent project manager, and a mature software engineering environment. We will also present an overview of the benefits of a mature software engineering environment based on 24 years of data from the Software Engineering Lab, and suggest some first steps that an organization can take to begin benefiting from this environment. The depth and breadth of software engineering exceeds this paper, various references are cited with a goal of raising awareness and encouraging further investigation into software engineering and project management practices.

Technology Tips: A Potpourri.

ERIC Educational Resources Information Center

Cuoco, Albert A.; And Others, Eds.

1994-01-01

Contains tips from readers about using technology in the classroom, including notebook computers, classroom sets of calculators, geometry software, LOGO software, publisher discounts, curriculum materials in CD-ROM, and volunteer help in computers and computer networking for schools. (MKR)

Proceedings of the Eighth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1983-01-01

The four major topics of discussion included: the NASA Software Engineering Laboratory, software testing, human factors in software engineering and software quality assessment. As in the past years, there were 12 position papers presented (3 for each topic) followed by questions and very heavy participation by the general audience.

Use of Soft Computing Technologies For Rocket Engine Control

NASA Technical Reports Server (NTRS)

Trevino, Luis C.; Olcmen, Semih; Polites, Michael

2003-01-01

The problem to be addressed in this paper is to explore how the use of Soft Computing Technologies (SCT) could be employed to further improve overall engine system reliability and performance. Specifically, this will be presented by enhancing rocket engine control and engine health management (EHM) using SCT coupled with conventional control technologies, and sound software engineering practices used in Marshall s Flight Software Group. The principle goals are to improve software management, software development time and maintenance, processor execution, fault tolerance and mitigation, and nonlinear control in power level transitions. The intent is not to discuss any shortcomings of existing engine control and EHM methodologies, but to provide alternative design choices for control, EHM, implementation, performance, and sustaining engineering. The approaches outlined in this paper will require knowledge in the fields of rocket engine propulsion, software engineering for embedded systems, and soft computing technologies (i.e., neural networks, fuzzy logic, and Bayesian belief networks), much of which is presented in this paper. The first targeted demonstration rocket engine platform is the MC-1 (formerly FASTRAC Engine) which is simulated with hardware and software in the Marshall Avionics & Software Testbed laboratory that

Illustrations for a Competency Based Curriculum Guide: Ethanol Spark Ignition Engine Conversion.

ERIC Educational Resources Information Center

Illinois State Board of Education, Springfield. Dept. of Adult, Vocational and Technical Education.

This document contains 56 illustrations for use in an Illinois-developed competency-based course in ethanol spark ignition engine conversion. Each illustration is related to a specific competency in the course curriculum guide. Illustrations, which include photographs and line drawings, cover some of the following topics: carburetion, compression,…

Hazardous Waste Processing in the Chemical Engineering Curriculum.

ERIC Educational Resources Information Center

Dorland, Dianne; Baria, Dorab N.

1995-01-01

Describes a sequence of two courses included in the chemical engineering program at the University of Minnesota, Duluth that deal with the processing of hazardous wastes. Covers course content and structure, and discusses developments in pollution prevention and waste management that led to the addition of these courses to the curriculum.…

Engine Performance (Section B: Fuel and Exhaust Systems). Auto Mechanics Curriculum Guide. Module 3. Instructor's Guide.

ERIC Educational Resources Information Center

Rains, Larry

This module is the third of nine modules in the competency-based Missouri Auto Mechanics Curriculum Guide. Six units cover: fuel supply systems; carburetion; carburetor service; gasoline engine electronic fuel injection; diesel fuel injection; and exhaust systems and turbochargers. Introductory materials include a competency profile and…

Military Curriculum Materials for Vocational and Technical Education. Soils Engineering 3-1. Edition 1.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This individualized, self-paced course for independent study in soils engineering was adapted from military curriculum materials for use in vocational education. The course is designed to acquaint students with various soil types and their characteristics using various procedures, tests, and recording forms. Some of these duties are determining…

Using Visual Simulation Tools And Learning Outcomes-Based Curriculum To Help Transportation Engineering Students And Practitioners To Better Understand And Design Traffic Signal Control Systems

DOT National Transportation Integrated Search

2012-06-01

The use of visual simulation tools to convey complex concepts has become a useful tool in education as well as in research. : This report describes a project that developed curriculum and visualization tools to train transportation engineering studen...

Project-Based Learning as a Contributing Factor to Graduates' Work Readiness

ERIC Educational Resources Information Center

Jollands, Margaret; Jolly, Lesley; Molyneaux, Tom

2012-01-01

This paper explores what work readiness means for two cohorts of graduate engineers, one from a traditional curriculum, the second from a largely project-based curriculum. Professional bodies and employers have defined a set of attributes for engineering graduates so that graduates will be "work ready". Problem-based learning (PBL) is…

American Studies and the Technical Curriculum: Man and Technology.

ERIC Educational Resources Information Center

St. Germain, Amos

An approach to teaching American studies at a Southern institute of engineering technology is described. The curriculum of this school is technically oriented to the professional engineer. Elective humanities courses must attract their own market and justify their places to both the students and the faculty. Two courses entitled "Man and…

Making Sense of Curriculum--The Transition into Science and Engineering University Programmes

ERIC Educational Resources Information Center

Ulriksen, Lars; Holmegaard, Henriette T.; Madsen, Lene Møller

2017-01-01

Research on students' transition, retention and experiences in science, technology, engineering and mathematics (STEM) has increasingly focused on identity formation and on students' integration in the study programmes. However, studies focusing on the role of the curriculum in this process at the level of higher education are scarce. The present…

Engineering Concepts Curriculum Project Newsletter, Volume 4, Number 2. The Man Made World.

ERIC Educational Resources Information Center

Liao, T.

Contained in this newsletter are several articles pertaining to activities of the Engineering Concepts Curriculum Project at the Polytechnic Institute of Brooklyn, New York. Two are of major concern. One deals with the development of a laboratory science course for senior high school students to improve technological literacy and entitled…

Using Symbolic Interactionism to Analyze a Specialized STEM High School Teacher's Experience in Curriculum Reform

ERIC Educational Resources Information Center

Teo, Tang Wee; Osborne, Margery

2012-01-01

In this paper, we present a microanalysis of a specialized STEM (science, technology, engineering, and mathematics) high school teacher's experience of self-initiated science inquiry curriculum reform. We examine the meanings of these two constructs: "inquiry curriculum" and "curriculum change" through the process lens of interactions, actions,…

A Bibliography of Externally Published Works by the SEI Engineering Techniques Program

DTIC Science & Technology

1992-08-01

media, and virtual reality * model- based engineering * programming languages * reuse * software architectures * software engineering as a discipline...Knowledge- Based Engineering Environments." IEEE Expert 3, 2 (May 1988): 18-23, 26-32. Audience: Practitioner [Klein89b] Klein, D.V. "Comparison of...Terms with Software Reuse Terminology: A Model- Based Approach." ACM SIGSOFT Software Engineering Notes 16, 2 (April 1991): 45-51. Audience: Practitioner

Mountain-Plains Curriculum.

ERIC Educational Resources Information Center

Mountain-Plains Education and Economic Development Program, Inc., Glasgow AFB, MT.

The document lists the Mountain-Plains curriculum by job title (where applicable), including support courses. The curriculum areas covered are mathematics skills, communication skills, office education, lodging services, food services, marketing and distribution, welding support, automotive, small engines, career guidance, World of Work, health…

Enhancing Instruction through Software Infusion.

ERIC Educational Resources Information Center

Sia, Archie P.

The presence of the computer in the classroom is no longer considered an oddity; it has become an ordinary resource for teachers to use for the enhancement of instruction. This paper presents an examination of software infusion, i.e., the use of computer software to enrich instruction in an academic curriculum. The process occurs when a chosen…

Improvement of medical content in the curriculum of biomedical engineering based on assessment of students outcomes.

PubMed

Abdulhay, Enas; Khnouf, Ruba; Haddad, Shireen; Al-Bashir, Areen

2017-08-04

Improvement of medical content in Biomedical Engineering curricula based on a qualitative assessment process or on a comparison with another high-standard program has been approached by a number of studies. However, the quantitative assessment tools have not been emphasized. The quantitative assessment tools can be more accurate and robust in cases of challenging multidisciplinary fields like that of Biomedical Engineering which includes biomedicine elements mixed with technology aspects. The major limitations of the previous research are the high dependence on surveys or pure qualitative approaches as well as the absence of strong focus on medical outcomes without implicit confusion with the technical ones. The proposed work presents the development and evaluation of an accurate/robust quantitative approach to the improvement of the medical content in the challenging multidisciplinary BME curriculum. The work presents quantitative assessment tools and subsequent improvement of curriculum medical content applied, as example for explanation, to the ABET (Accreditation Board for Engineering and Technology, USA) accredited biomedical engineering BME department at Jordan University of Science and Technology. The quantitative results of assessment of curriculum/course, capstone, exit exam, course assessment by student (CAS) as well as of surveys filled by alumni, seniors, employers and training supervisors were, first, mapped to the expected students' outcomes related to the medical field (SOsM). The collected data were then analyzed and discussed to find curriculum weakness points by tracking shortcomings in every outcome degree of achievement. Finally, actions were taken to fill in the gaps of the curriculum. Actions were also mapped to the students' medical outcomes (SOsM). Weighted averages of obtained quantitative values, mapped to SOsM, indicated accurately the achievement levels of all outcomes as well as the necessary improvements to be performed in curriculum. Mapping the improvements to SOsM also helps in the assessment of the following cycle. The suggested assessment tools can be generalized and extended to any other BME department. Robust improvement of medical content in BME curriculum can subsequently be achieved.

Integrated Curriculum Design Reform of Civil Engineering Management Discipline Based on Inter-disciplinary Professional Training

NASA Astrophysics Data System (ADS)

Yidong, Xu; Ping, Wu; Jian, Chen; Jiansheng, Shen

2018-05-01

In view of the shortcomings of the current civil engineering management discipline, this paper investigates the necessity of the course design reform. Based on the analysis of basic occupation requirements of civil engineering management discipline, the basic ideas and implementation strategies of the integrated reform of curriculum design system are proposed, which can not only improve the students’ overall understanding of knowledge and skills, but also enhance the system of student learning.

V&V Within Reuse-Based Software Engineering

NASA Technical Reports Server (NTRS)

Addy, Edward A.

1996-01-01

Verification and Validation (V&V) is used to increase the level of assurance of critical software, particularly that of safety-critical and mission-critical software. V&V is a systems engineering discipline that evaluates the software in a systems context, and is currently applied during the development of a specific application system. In order to bring the effectiveness of V&V to bear within reuse-based software engineering, V&V must be incorporated within the domain engineering process.

Curriculum planning for the development of graphicacy capability: three case studies from Europe and the USA

NASA Astrophysics Data System (ADS)

Danos, Xenia; Barr, Ronald; Górska, Renata; Norman, Eddie

2014-11-01

Curriculum planning for the development of graphicacy capability has not been systematically included in general education to coincide with the graphicacy needs of human society. In higher education, graphicacy curricula have been developed to meet the needs of certain disciplines, for example medical and teacher training and engineering, among others. A framework for graphicacy curricula, anticipating the graphicacy needs in higher education, has yet to be strategically planned for general education. This is partly a result of lack of research effort in this area, but also a result of lack of systematic curriculum planning in general. This paper discusses these issues in the context of graphicacy curricula for engineering. The paper presents three broad individual case studies spanning Europe and the USA, brought together by the common denominator, graphicacy. The case studies are based on: an analysis of graphicacy within general education curricula, an analysis of graphicacy for engineering education in Europe and an analysis of graphicacy for engineering education in the USA. These three papers were originally presented in a plenary session at the American Society for Engineering Education, Engineering Design Graphics Division at the University of Limerick in November 2012. The case studies demonstrate the potential for strategic curriculum planning in regard to the development of graphicacy in general education and an overview of a methodology to achieve that. It also offers further evidence towards the importance of the systematic classification of graphics capabilities in Engineering and how the lack of a developed theoretical framework in this area undermines the case for the importance of graphics within engineering education.

Professional Ethics of Software Engineers: An Ethical Framework.

PubMed

Lurie, Yotam; Mark, Shlomo

2016-04-01

The purpose of this article is to propose an ethical framework for software engineers that connects software developers' ethical responsibilities directly to their professional standards. The implementation of such an ethical framework can overcome the traditional dichotomy between professional skills and ethical skills, which plagues the engineering professions, by proposing an approach to the fundamental tasks of the practitioner, i.e., software development, in which the professional standards are intrinsically connected to the ethical responsibilities. In so doing, the ethical framework improves the practitioner's professionalism and ethics. We call this approach Ethical-Driven Software Development (EDSD), as an approach to software development. EDSD manifests the advantages of an ethical framework as an alternative to the all too familiar approach in professional ethics that advocates "stand-alone codes of ethics". We believe that one outcome of this synergy between professional and ethical skills is simply better engineers. Moreover, since there are often different software solutions, which the engineer can provide to an issue at stake, the ethical framework provides a guiding principle, within the process of software development, that helps the engineer evaluate the advantages and disadvantages of different software solutions. It does not and cannot affect the end-product in and of-itself. However, it can and should, make the software engineer more conscious and aware of the ethical ramifications of certain engineering decisions within the process.

Engineering Complex Embedded Systems with State Analysis and the Mission Data System

NASA Technical Reports Server (NTRS)

Ingham, Michel D.; Rasmussen, Robert D.; Bennett, Matthew B.; Moncada, Alex C.

2004-01-01

It has become clear that spacecraft system complexity is reaching a threshold where customary methods of control are no longer affordable or sufficiently reliable. At the heart of this problem are the conventional approaches to systems and software engineering based on subsystem-level functional decomposition, which fail to scale in the tangled web of interactions typically encountered in complex spacecraft designs. Furthermore, there is a fundamental gap between the requirements on software specified by systems engineers and the implementation of these requirements by software engineers. Software engineers must perform the translation of requirements into software code, hoping to accurately capture the systems engineer's understanding of the system behavior, which is not always explicitly specified. This gap opens up the possibility for misinterpretation of the systems engineer s intent, potentially leading to software errors. This problem is addressed by a systems engineering methodology called State Analysis, which provides a process for capturing system and software requirements in the form of explicit models. This paper describes how requirements for complex aerospace systems can be developed using State Analysis and how these requirements inform the design of the system software, using representative spacecraft examples.

Research on Visualization Design Method in the Field of New Media Software Engineering

NASA Astrophysics Data System (ADS)

Deqiang, Hu

2018-03-01

In the new period of increasingly developed science and technology, with the increasingly fierce competition in the market and the increasing demand of the masses, new design and application methods have emerged in the field of new media software engineering, that is, the visualization design method. Applying the visualization design method to the field of new media software engineering can not only improve the actual operation efficiency of new media software engineering but more importantly the quality of software development can be enhanced by means of certain media of communication and transformation; on this basis, the progress and development of new media software engineering in China are also continuously promoted. Therefore, the application of visualization design method in the field of new media software engineering is analysed concretely in this article from the perspective of the overview of visualization design methods and on the basis of systematic analysis of the basic technology.

A Triangulated Study of Academic Language Needs of Iranian Students of Computer Engineering: Are the Courses on Track?

ERIC Educational Resources Information Center

Atai, Mahmood Reza; Shoja, Leila

2011-01-01

Even though English for Specific Academic Purposes (ESAP) courses constitute a significant part of the Iranian university curriculum, curriculum developers have generally developed the programs based on intuition. This study assessed the present and target situation academic language needs of undergraduate students of computer engineering. To this…

Developing a Pre-Engineering Curriculum for 3D Printing Skills for High School Technology Education

ERIC Educational Resources Information Center

Chien, Yu-Hung

2017-01-01

This study developed an integrated-STEM CO[subscript 2] dragster design course using 3D printing technology. After developing a pre-engineering curriculum, we conducted a teaching experiment to assess students' differences in creativity, race forecast accuracy, and learning performance. We compared student performance in both 3D printing and…

Project-Based Curriculum for Teaching Analytical Design to Freshman Engineering Students via Reconfigurable Trebuchets

ERIC Educational Resources Information Center

Herber, Daniel R.; Deshmukh, Anand P.; Mitchell, Marlon E.; Allison, James T.

2016-01-01

This paper presents an effort to revitalize a large introductory engineering course for incoming freshman students that teaches them analytical design through a project-based curriculum. This course was completely transformed from a seminar-based to a project-based course that integrates hands-on experimentation with analytical work. The project…

Construction Mechanic Part I, 8-5. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, is the first of a two-course series that teaches students to maintain and repair automotive and construction equipment using either gasoline or diesel engines. It covers basic combustion engine principles and electrical system principles as well…

Engine Performance (Section C: Emission Control Systems). Auto Mechanics Curriculum Guide. Module 3. Instructor's Guide.

ERIC Educational Resources Information Center

Rains, Larry

This engine performance (emission control systems) module is one of a series of competency-based modules in the Missouri Auto Mechanics Curriculum Guide. Topics of this module's five units are: positive crankcase ventilation (PCV) and evaporative emission control systems; exhaust gas recirculation (EGR); air injection and catalytic converters;…

Improving Professionalism in the Engineering Curriculum through a Novel Use of Oral Presentations

ERIC Educational Resources Information Center

Berjano, Enrique; Sales-Nebot, Laura; Lozano-Nieto, Albert

2013-01-01

This hypothesis is based on the fact that oral presentations in the context of engineering education could be used not only to develop oral communication skills but also to augment the professionalism in the curriculum. The methodological innovation is first described, which allows encouraging the capacity of summarising ideas, teamwork,…

Chemical Science and Technology II. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Ballinger, Jack T.; Wolf, Lawrence J.

This study guide is part of a program of studies entitled the Science and Engineering Technician (SET) Curriculum developed to provide a framework for training technicians in the use of electronic instruments and their applications. This interdisciplinary course of study integrates elements from the disciplines of chemistry, physics, mathematics,…

An Exploration of the Effectiveness of Product Archeology in an Undergraduate Engineering Curriculum: What Can a Five-Hour Curriculum Do?

ERIC Educational Resources Information Center

Okudan Kremer, Gül E.; Simpson, Timothy W.; Ashour, Omar M.

2013-01-01

In this paper, we present our efforts in embedding product archeology inspired curricula into two engineering courses along with assessment results. The assessment focuses on the effectiveness of the embedded curricula in enhancing students' understanding on the global, societal, environmental, and economic (GSEE) implications of engineering…

Electronic Components, Transducers, and Basic Circuits. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Mowery, Donald R.

This study guide is part of a program of studies entitled the Science and Engineering Technician (SET) Curriculum developed for the purpose of training technicians in the use of electronic instruments and their applications. The program integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and…

Review and Redesign of the Curriculum of a Masters Programme in Telecommunications Engineering--Towards an Outcome-Based Approach

ERIC Educational Resources Information Center

Gharaibeh, Khaled; Harb, Bassam; Salameh, Haythem Bany; Zoubi, Asem; Shamali, Ahmed; Murphy, Noel; Brennan, Conor

2013-01-01

This article presents the methodology and results of the curriculum review of the Masters of Science programme in Wireless Communications offered by the Telecommunications Engineering Department at Yarmouk University in Jordan. The review is based on expert opinion collected through questionnaires and meetings about the programme and focuses on…

Implementing "Big Ideas" to Advance the Teaching and Learning of Science, Technology, Engineering, and Mathematics (STEM)

ERIC Educational Resources Information Center

Chalmers, Christina; Carter, Merilyn; Cooper, Tom; Nason, Rod

2017-01-01

Although education experts are increasingly advocating the incorporation of integrated Science, Technology, Engineering, and Mathematics (STEM) curriculum units to address limitations in much current STEM teaching and learning, a review of the literature reveals that more often than not such curriculum units are not mediating the construction of…

Impact of an Engineering Design-Based Curriculum Compared to an Inquiry-Based Curriculum on Fifth Graders' Content Learning of Simple Machines

ERIC Educational Resources Information Center

Marulcu, Ismail; Barnett, Michael

2016-01-01

Background: Elementary Science Education is struggling with multiple challenges. National and State test results confirm the need for deeper understanding in elementary science education. Moreover, national policy statements and researchers call for increased exposure to engineering and technology in elementary science education. The basic…

Integrating STEM into the Primary School Curriculum

ERIC Educational Resources Information Center

Qureshi, Asima

2015-01-01

Science has always been a valued subject at Meadowbrook Primary School, and the head teacher has a real vision for the school to embrace engineering as part of the science curriculum to give the children the opportunity to be more creative with their projects. To get started, teachers attended an engineering workshop run by Science Oxford Schools…

Time for a Tune-Up: Comprehensive Curriculum Evaluation

ERIC Educational Resources Information Center

Meyers, Lisa H.

2005-01-01

How important is a high-quality curriculum? A school without a quality curriculum is like a car without an engine--neither goes anywhere. One responsibility of a school administrator is to ensure that quality curriculum is designed, adopted, and implemented. The No Child Left Behind act (NCLB) has focused the attention of an entire nation on the…

State analysis requirements database for engineering complex embedded systems

NASA Technical Reports Server (NTRS)

Bennett, Matthew B.; Rasmussen, Robert D.; Ingham, Michel D.

2004-01-01

It has become clear that spacecraft system complexity is reaching a threshold where customary methods of control are no longer affordable or sufficiently reliable. At the heart of this problem are the conventional approaches to systems and software engineering based on subsystem-level functional decomposition, which fail to scale in the tangled web of interactions typically encountered in complex spacecraft designs. Furthermore, there is a fundamental gap between the requirements on software specified by systems engineers and the implementation of these requirements by software engineers. Software engineers must perform the translation of requirements into software code, hoping to accurately capture the systems engineer's understanding of the system behavior, which is not always explicitly specified. This gap opens up the possibility for misinterpretation of the systems engineer's intent, potentially leading to software errors. This problem is addressed by a systems engineering tool called the State Analysis Database, which provides a tool for capturing system and software requirements in the form of explicit models. This paper describes how requirements for complex aerospace systems can be developed using the State Analysis Database.

Integrating Computational Chemistry into the Physical Chemistry Curriculum

ERIC Educational Resources Information Center

Johnson, Lewis E.; Engel, Thomas

2011-01-01

Relatively few undergraduate physical chemistry programs integrate molecular modeling into their quantum mechanics curriculum owing to concerns about limited access to computational facilities, the cost of software, and concerns about increasing the course material. However, modeling exercises can be integrated into an undergraduate course at a…

Business Computer Programming I. Curriculum Guide. Second Edition.

ERIC Educational Resources Information Center

Patton, Jan

This guide provides instructors of business computer programming with a curriculum correlated directly to the office education essential elements mandated by the Texas Education Agency. Introductory materials include a scope and sequence and lists of suggested textbooks, resource books, software, audiovisuals, and magazines. Eleven units are…

Computerizing the Accounting Curriculum.

ERIC Educational Resources Information Center

Nash, John F.; England, Thomas G.

1986-01-01

Discusses the use of computers in college accounting courses. Argues that the success of new efforts in using computers in teaching accounting is dependent upon increasing instructors' computer skills, and choosing appropriate hardware and software, including commercially available business software packages. (TW)

Key Issues in Instructional Computer Graphics.

ERIC Educational Resources Information Center

Wozny, Michael J.

1981-01-01

Addresses key issues facing universities which plan to establish instructional computer graphics facilities, including computer-aided design/computer aided manufacturing systems, role in curriculum, hardware, software, writing instructional software, faculty involvement, operations, and research. Thirty-seven references and two appendices are…

Computational Experiments for Science and Engineering Education

NASA Technical Reports Server (NTRS)

Xie, Charles

2011-01-01

How to integrate simulation-based engineering and science (SBES) into the science curriculum smoothly is a challenging question. For the importance of SBES to be appreciated, the core value of simulations-that they help people understand natural phenomena and solve engineering problems-must be taught. A strategy to achieve this goal is to introduce computational experiments to the science curriculum to replace or supplement textbook illustrations and exercises and to complement or frame hands-on or wet lab experiments. In this way, students will have an opportunity to learn about SBES without compromising other learning goals required by the standards and teachers will welcome these tools as they strengthen what they are already teaching. This paper demonstrates this idea using a number of examples in physics, chemistry, and engineering. These exemplary computational experiments show that it is possible to create a curriculum that is both deeper and wider.

Health systems engineering fellowship: curriculum and program development.

PubMed

Watts, Bradley V; Shiner, Brian; Cully, Jeffrey A; Gilman, Stuart C; Benneyan, James C; Eisenhauer, William

2015-01-01

Industrial engineering and related disciplines have been used widely in improvement efforts in many industries. These approaches have been less commonly attempted in health care. One factor limiting application is the limited workforce resulting from a lack of specific education and professional development in health systems engineering (HSE). The authors describe the development of an HSE fellowship within the United States Department of Veterans Affairs, Veterans Health Administration (VA). This fellowship includes a novel curriculum based on specifically established competencies for HSE. A 1-year HSE curriculum was developed and delivered to fellows at several VA engineering resource centers over several years. On graduation, a majority of the fellows accepted positions in the health care field. Challenges faced in developing the fellowship are discussed. Advanced educational opportunities in applied HSE have the potential to develop the workforce capacity needed to improve the quality of health care. © 2014 by the American College of Medical Quality.

The TAME Project: Towards improvement-oriented software environments

NASA Technical Reports Server (NTRS)

Basili, Victor R.; Rombach, H. Dieter

1988-01-01

Experience from a dozen years of analyzing software engineering processes and products is summarized as a set of software engineering and measurement principles that argue for software engineering process models that integrate sound planning and analysis into the construction process. In the TAME (Tailoring A Measurement Environment) project at the University of Maryland, such an improvement-oriented software engineering process model was developed that uses the goal/question/metric paradigm to integrate the constructive and analytic aspects of software development. The model provides a mechanism for formalizing the characterization and planning tasks, controlling and improving projects based on quantitative analysis, learning in a deeper and more systematic way about the software process and product, and feeding the appropriate experience back into the current and future projects. The TAME system is an instantiation of the TAME software engineering process model as an ISEE (integrated software engineering environment). The first in a series of TAME system prototypes has been developed. An assessment of experience with this first limited prototype is presented including a reassessment of its initial architecture.

Impacts of Technological Changes in the Cyber Environment on Software/Systems Engineering Workforce Development

DTIC Science & Technology

2010-04-01

for decoupled parallel development Ref: Barry Boehm 12 Impacts of Technological Changes in the Cyber Environment on Software/Systems Engineering... Pressman , R.S., Software Engineering: A Practitioner’s Approach, 13 Impacts of Technological Changes in the Cyber Environment on Software/Systems

Software And Systems Engineering Risk Management

DTIC Science & Technology

2010-04-01

RSKM 2004 COSO Enterprise RSKM Framework 2006 ISO/IEC 16085 Risk Management Process 2008 ISO/IEC 12207 Software Lifecycle Processes 2009 ISO/IEC...1 Software And Systems Engineering Risk Management John Walz VP Technical and Conferences Activities, IEEE Computer Society Vice-Chair Planning...Software & Systems Engineering Standards Committee, IEEE Computer Society US TAG to ISO TMB Risk Management Working Group Systems and Software

Proceedings of the 19th Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1994-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of applications software. The goals of the SEL are: (1) to understand the software development process in the GSFC environment; (2) to measure the effects of various methodologies, tools, and models on this process; and (3) to identify and then to apply successful development practices. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that include this document.

Data collection procedures for the Software Engineering Laboratory (SEL) database

NASA Technical Reports Server (NTRS)

Heller, Gerard; Valett, Jon; Wild, Mary

1992-01-01

This document is a guidebook to collecting software engineering data on software development and maintenance efforts, as practiced in the Software Engineering Laboratory (SEL). It supersedes the document entitled Data Collection Procedures for the Rehosted SEL Database, number SEL-87-008 in the SEL series, which was published in October 1987. It presents procedures to be followed on software development and maintenance projects in the Flight Dynamics Division (FDD) of Goddard Space Flight Center (GSFC) for collecting data in support of SEL software engineering research activities. These procedures include detailed instructions for the completion and submission of SEL data collection forms.

Annotated bibliography of Software Engineering Laboratory literature

NASA Technical Reports Server (NTRS)

1985-01-01

An annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory is presented. More than 100 publications are summarized. These publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials are grouped into five general subject areas for easy reference: (1) the software engineering laboratory; (2) software tools; (3) models and measures; (4) technology evaluations; and (5) data collection. An index further classifies these documents by specific topic.

Modular Rocket Engine Control Software (MRECS)

NASA Technical Reports Server (NTRS)

Tarrant, Charlie; Crook, Jerry

1997-01-01

The Modular Rocket Engine Control Software (MRECS) Program is a technology demonstration effort designed to advance the state-of-the-art in launch vehicle propulsion systems. Its emphasis is on developing and demonstrating a modular software architecture for a generic, advanced engine control system that will result in lower software maintenance (operations) costs. It effectively accommodates software requirements changes that occur due to hardware. technology upgrades and engine development testing. Ground rules directed by MSFC were to optimize modularity and implement the software in the Ada programming language. MRECS system software and the software development environment utilize Commercial-Off-the-Shelf (COTS) products. This paper presents the objectives and benefits of the program. The software architecture, design, and development environment are described. MRECS tasks are defined and timing relationships given. Major accomplishment are listed. MRECS offers benefits to a wide variety of advanced technology programs in the areas of modular software, architecture, reuse software, and reduced software reverification time related to software changes. Currently, the program is focused on supporting MSFC in accomplishing a Space Shuttle Main Engine (SSME) hot-fire test at Stennis Space Center and the Low Cost Boost Technology (LCBT) Program.

Software Engineering Improvement Plan

NASA Technical Reports Server (NTRS)

2006-01-01

In performance of this task order, bd Systems personnel provided support to the Flight Software Branch and the Software Working Group through multiple tasks related to software engineering improvement and to activities of the independent Technical Authority (iTA) Discipline Technical Warrant Holder (DTWH) for software engineering. To ensure that the products, comments, and recommendations complied with customer requirements and the statement of work, bd Systems personnel maintained close coordination with the customer. These personnel performed work in areas such as update of agency requirements and directives database, software effort estimation, software problem reports, a web-based process asset library, miscellaneous documentation review, software system requirements, issue tracking software survey, systems engineering NPR, and project-related reviews. This report contains a summary of the work performed and the accomplishments in each of these areas.

Software engineering as an engineering discipline

NASA Technical Reports Server (NTRS)

Freedman, Glenn B.

1988-01-01

The purpose of this panel is to explore the emerging field of software engineering from a variety of perspectives: university programs; industry training and definition; government development; and technology transfer. In doing this, the panel will address the issues of distinctions among software engineering, computer science, and computer hardware engineering as they relate to the challenges of large, complex systems.

Motivating the Concept of Eigenvectors via Cryptography

ERIC Educational Resources Information Center

Siap, Irfan

2008-01-01

New methods of teaching linear algebra in the undergraduate curriculum have attracted much interest lately. Most of this work is focused on evaluating and discussing the integration of special computer software into the Linear Algebra curriculum. In this article, I discuss my approach on introducing the concept of eigenvectors and eigenvalues,…

Homology Modeling and Molecular Docking for the Science Curriculum

ERIC Educational Resources Information Center

McDougal, Owen M.; Cornia, Nic; Sambasivarao, S. V.; Remm, Andrew; Mallory, Chris; Oxford, Julia Thom; Maupin, C. Mark; Andersen, Tim

2014-01-01

DockoMatic 2.0 is a powerful open source software program (downloadable from sourceforge.net) that allows users to utilize a readily accessible computational tool to explore biomolecules and their interactions. This manuscript describes a practical tutorial for use in the undergraduate curriculum that introduces students to macromolecular…

Database Systems. Course Three. Information Systems Curriculum.

ERIC Educational Resources Information Center

O'Neil, Sharon Lund; Everett, Donna R.

This course is the third of seven in the Information Systems curriculum. The purpose of the course is to familiarize students with database management concepts and standard database management software. Databases and their roles, advantages, and limitations are explained. An overview of the course sets forth the condition and performance standard…

Some Design Issues for an Online Japanese Textbook

ERIC Educational Resources Information Center

Nagata, Noriko

2010-01-01

This paper discusses several design issues in the development of a new online Japanese textbook, called "Robo-Sensei: Japanese Curriculum with Automated Feedback". When it is completed, the new online textbook will present a full Japanese curriculum. It extends a previously published online software program, "Robo-Sensei: Personal Japanese Tutor"…

Integration of Computational Chemistry into the Undergraduate Organic Chemistry Laboratory Curriculum

ERIC Educational Resources Information Center

Esselman, Brian J.; Hill, Nicholas J.

2016-01-01

Advances in software and hardware have promoted the use of computational chemistry in all branches of chemical research to probe important chemical concepts and to support experimentation. Consequently, it has become imperative that students in the modern undergraduate curriculum become adept at performing simple calculations using computational…

Cognitive Tutor®. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2016

2016-01-01

"Cognitive Tutor"® is a secondary mathematics curriculum developed by Carnegie Learning that focuses on how students think about and learn mathematics. Teachers facilitate student learning as students acquire and apply new information and discuss their work. The curriculum can be implemented using a textbook, adaptive software, or…

A Statistics Curriculum for the Undergraduate Chemistry Major

ERIC Educational Resources Information Center

Schlotter, Nicholas E.

2013-01-01

Our ability to statistically analyze data has grown significantly with the maturing of computer hardware and software. However, the evolution of our statistics capabilities has taken place without a corresponding evolution in the curriculum for the undergraduate chemistry major. Most faculty understands the need for a statistical educational…

Applying formal methods and object-oriented analysis to existing flight software

NASA Technical Reports Server (NTRS)

Cheng, Betty H. C.; Auernheimer, Brent

1993-01-01

Correctness is paramount for safety-critical software control systems. Critical software failures in medical radiation treatment, communications, and defense are familiar to the public. The significant quantity of software malfunctions regularly reported to the software engineering community, the laws concerning liability, and a recent NRC Aeronautics and Space Engineering Board report additionally motivate the use of error-reducing and defect detection software development techniques. The benefits of formal methods in requirements driven software development ('forward engineering') is well documented. One advantage of rigorously engineering software is that formal notations are precise, verifiable, and facilitate automated processing. This paper describes the application of formal methods to reverse engineering, where formal specifications are developed for a portion of the shuttle on-orbit digital autopilot (DAP). Three objectives of the project were to: demonstrate the use of formal methods on a shuttle application, facilitate the incorporation and validation of new requirements for the system, and verify the safety-critical properties to be exhibited by the software.

Proceedings of the Annual Ada Software Engineering Education and Training Symposium (3rd) Held in Denver, Colorado on June 14-16, 1988

DTIC Science & Technology

1988-06-01

Based Software Engineering Project Course .............. 83 SSoftware Engineering, Software Engineering Concepts: The Importance of Object-Based...quality assurance, and independent system testing . The Chief Programmer is responsible for all software development activities, including prototyping...during the Requirements Analysis phase, the Preliminary Design, the Detailed Design, Coding and Unit Testing , CSC Integration and Testing , and informal

Increasing emergency medicine residents' confidence in disaster management: use of an emergency department simulator and an expedited curriculum.

PubMed

Franc, Jeffrey Michael; Nichols, Darren; Dong, Sandy L

2012-02-01

Disaster Medicine is an increasingly important part of medicine. Emergency Medicine residency programs have very high curriculum commitments, and adding Disaster Medicine training to this busy schedule can be difficult. Development of a short Disaster Medicine curriculum that is effective and enjoyable for the participants may be a valuable addition to Emergency Medicine residency training. A simulation-based curriculum was developed. The curriculum included four group exercises in which the participants developed a disaster plan for a simulated hospital. This was followed by a disaster simulation using the Disastermed.Ca Emergency Disaster Simulator computer software Version 3.5.2 (Disastermed.Ca, Edmonton, Alberta, Canada) and the disaster plan developed by the participants. Progress was assessed by a pre- and post-test, resident evaluations, faculty evaluation of Command and Control, and markers obtained from the Disastermed.Ca software. Twenty-five residents agreed to partake in the training curriculum. Seventeen completed the simulation. There was no statistically significant difference in pre- and post-test scores. Residents indicated that they felt the curriculum had been useful, and judged it to be preferable to a didactic curriculum. In addition, the residents' confidence in their ability to manage a disaster increased on both a personal and and a departmental level. A simulation-based model of Disaster Medicine training, requiring approximately eight hours of classroom time, was judged by Emergency Medicine residents to be a valuable component of their medical training, and increased their confidence in personal and departmental disaster management capabilities.

Incorporation of Data Analysis throughout the ChE Curriculum Made Easy with DataFit

ERIC Educational Resources Information Center

Brenner, James R.

2007-01-01

At Florida Tech, we have incorporated DataFit from Oakdale Engineering throughout the entire curriculum, beginning with ChE 1102, an eight-week, one-day-per-week, two-hour, one-credit-hour, second-semester Introduction to Chemical Engineering course in a hands-on computer classroom. Our experience is that students retain data analysis concepts…

Small Engine and Related Equipment Repair Curriculum Guide. Michigan Trade and Industrial Education.

ERIC Educational Resources Information Center

Michigan State Univ., East Lansing. Coll. of Agriculture and Natural Resources Education Inst.

This task-based curriculum guide for small engine and related equipment repair is intended to help the teacher develop a classroom management system where students learn by doing. Introductory materials include a Dictionary of Occupational Titles job code and title sheet, a career ladder, a matrix relating duty/task numbers to job titles, and a…

Engine Tune-Up Service. Unit 5: Fuel and Carburetion Systems. Student Guide. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Goodson, Ludy

This student guide is for Unit 5, Fuel and Carburetion Systems, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with inspecting and servicing the fuel and carburetion systems. A companion review exercise book and posttests are available separately as CE 031 218-219. An introduction tells how this unit fits…

Improving Highway Safety Manpower: Traffic Engineering Technician Project at Longview Community College and Community College of Denver. Phase 2. Final Report.

ERIC Educational Resources Information Center

Korim, Andrew S.

In Phase 2, materials on traffic accident investigation were introduced into the curriculum to determine the appropriateness of such materials in preparing traffic engineering technicians. This report gives findings, conclusions, and recommendations based on the testing efforts. The primary conclusion is that the curriculum being tested was…

Final-Year Projects as a Major Element in the IE Curriculum

ERIC Educational Resources Information Center

Vitner, G.; Rozenes, S.

2009-01-01

This paper presents a multi-perspective view of the final-year project of an industrial engineering and management (IEM) department. The final year project is a major element of a 4-year curriculum within any engineering discipline. Such a project gives the student an opportunity to use and implement methods, techniques and tools that he or she…

Examining Teacher Mental Models for the Implementation of a STEM-Focused Curriculum Paradigm in Engineering and Technology Education

ERIC Educational Resources Information Center

Kerr, Janel M.

2013-01-01

The purpose of this study was to explore the role of mental models in Idaho's Engineering and Technology Education teachers' in decision making when faced with major curriculum changes. Senge (1990) defined mental models as, "deeply ingrained assumptions, generalizations, or even pictures or images that influence how we understand the world…

Engine Tune-up Service. Unit 6: Emission Control Systems. Student Guide. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Bacon, E. Miles

This student guide is for Unit 6, Emission Control Systems, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with inspecting, testing, and servicing an emission control system. A companion review exercise book and posttests are available separately as CE 031 221-222. An introduction tells how this unit fits…

Integrating Science, Technology, Engineering, and Mathematics: Issues, Reflections, and Ways Forward. Teaching and Learning in Science Series

ERIC Educational Resources Information Center

Rennie, Leonie, Ed.; Venville, Grady, Ed.; Wallace, John, Ed.

2012-01-01

How can curriculum integration of school science with the related disciplines of technology, engineering and mathematics (STEM) enhance students' skills and their ability to link what they learn in school with the world outside the classroom? Featuring actual case studies of teachers' attempts to integrate their curriculum, their reasons for doing…

Engine Tune-Up Service. Unit 4: Secondary Circuit. Student Guide. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Bacon, E. Miles

This student guide is for Unit 4, Secondary Circuit, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with how to test and service the secondary ignition circuit. A companion review exercise book and posttests are available separately as CE 031 215-216. An introduction tells how this unit fits into the total…

Esssential ethics--embedding ethics into an engineering curriculum.

PubMed

Fleischmann, Shirley T

2004-04-01

Ethical decision-making is essential to professionalism in engineering. For that reason, ethics is a required topic in an ABET approved engineering curriculum and it must be a foundational strand that runs throughout the entire curriculum. In this paper the curriculum approach that is under development at the Padnos School of Engineering (PSE) at Grand Valley State University will be described. The design of this program draws heavily from the successful approach used at the service academies--in particular West Point and the United States Naval Academy. As is the case for the service academies, all students are introduced to the "Honor Concept" (which includes an Honor Code) as freshmen. As an element of professionalism the PSE program requires 1500 hours of co-op experience which is normally divided into three semesters of full-time work alternated with academic semesters during the last two years of the program. This offers the faculty an opportunity to teach ethics as a natural aspect of professionalism through the academic requirements for co-op. In addition to required elements throughout the program, the students are offered opportunities to participate in service projects which highlight responsible citizenship. These elements and other parts of the approach will be described.

Proceedings of the Fifteenth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1990-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by GSFC and created for the purpose of investigating the effectiveness of software engineering technologies when applied to the development of applications software. The goals of the SEL are: (1) to understand the software development process in the GSFC environment; (2) to measure the effect of various methodologies, tools, and models on this process; and (3) to identify and then to apply successful development practices. Fifteen papers were presented at the Fifteenth Annual Software Engineering Workshop in five sessions: (1) SEL at age fifteen; (2) process improvement; (3) measurement; (4) reuse; and (5) process assessment. The sessions were followed by two panel discussions: (1) experiences in implementing an effective measurement program; and (2) software engineering in the 1980's. A summary of the presentations and panel discussions is given.

Enhancing Engineering Education through Engineering Management

ERIC Educational Resources Information Center

Pence, Kenneth R.; Rowe, Christopher J.

2012-01-01

Engineering Management courses are added to a traditional engineering curriculum to enhance the value of an undergraduate's engineering degree. A four-year engineering degree often leaves graduates lacking in business and management acumen. Engineering management education covers topics enhancing the value of new graduates by teaching management…

A Knowledge Engineering Approach to Analysis and Evaluation of Construction Schedules

DTIC Science & Technology

1990-02-01

software engineering discipline focusing on constructing KBSs. It is an incremental and cyclical process that requires the interaction of a domain expert(s...the U.S. Army Coips of Engineers ; and (3) the project management software developer, represented by Pinnell Engineering , Inc. Since the primary...the programming skills necessary to convert the raw knowledge intn a form a computer can understand. knowledge engineering : The software engineering

Questioning the Role of Requirements Engineering in the Causes of Safety-Critical Software Failures

NASA Technical Reports Server (NTRS)

Johnson, C. W.; Holloway, C. M.

2006-01-01

Many software failures stem from inadequate requirements engineering. This view has been supported both by detailed accident investigations and by a number of empirical studies; however, such investigations can be misleading. It is often difficult to distinguish between failures in requirements engineering and problems elsewhere in the software development lifecycle. Further pitfalls arise from the assumption that inadequate requirements engineering is a cause of all software related accidents for which the system fails to meet its requirements. This paper identifies some of the problems that have arisen from an undue focus on the role of requirements engineering in the causes of major accidents. The intention is to provoke further debate within the emerging field of forensic software engineering.

Computer systems and software engineering

NASA Technical Reports Server (NTRS)

Mckay, Charles W.

1988-01-01

The High Technologies Laboratory (HTL) was established in the fall of 1982 at the University of Houston Clear Lake. Research conducted at the High Tech Lab is focused upon computer systems and software engineering. There is a strong emphasis on the interrelationship of these areas of technology and the United States' space program. In Jan. of 1987, NASA Headquarters announced the formation of its first research center dedicated to software engineering. Operated by the High Tech Lab, the Software Engineering Research Center (SERC) was formed at the University of Houston Clear Lake. The High Tech Lab/Software Engineering Research Center promotes cooperative research among government, industry, and academia to advance the edge-of-knowledge and the state-of-the-practice in key topics of computer systems and software engineering which are critical to NASA. The center also recommends appropriate actions, guidelines, standards, and policies to NASA in matters pertinent to the center's research. Results of the research conducted at the High Tech Lab/Software Engineering Research Center have given direction to many decisions made by NASA concerning the Space Station Program.

Geospatial Education and Research Development: A Laboratory for Remote Sensing and Environmental Analysis (LaRSEA)

NASA Technical Reports Server (NTRS)

Allen, Thomas R., Jr.

1999-01-01

Old Dominion University has claimed the title "University of the 21st Century," with a bold emphasis on technology innovation and application. In keeping with this claim, the proposed work has implemented a new laboratory equipped for remote sensing as well as curriculum and research innovations afforded for present and future faculty and students. The developments summarized within this report would not have been possible without the support of the NASA grant and significant cost-sharing of several units within the University. The grant effectively spring-boarded the university into major improvements in its approach to remote sensing and geospatial information technologies. The university has now committed to licensing Erdas Imagine software for the laboratory, a campus-wide ESRI geographic information system (GIS) products license, and several smaller software and hardware utilities available to faculty and students through the laboratory. Campus beneficiaries of this grant have included faculty from departments including Ocean, Earth. and Atmospheric Sciences, Political Science and Geography, Ecological Sciences, Environmental Health, and Civil and Environmental Engineering. High student interest is evidenced in students in geology, geography, ecology, urban studies, and planning. Three new courses have been added to the catalog and offered this year. Cross-cutting curriculum changes are in place with growing enrollments in remote sensing, GIS, and a new co-taught seminar in applied coastal remote sensing. The enabling grant has also allowed project participants to attract external funding for research grants, thereby providing additional funds beyond the planned matching, maintenance and growth of software and hardware, and stipends for student assistants. Two undergraduate assistants and two graduate assistants have been employed by full-time assistantships as a result. A new certificate is offered to students completing an interdisciplinary course sequence in remote sensing and coastal environments. Subsequent phases of the project are under planning. including seminars for regional coastal managers and public dissemination of remote sensing science through the local media and university publications.

Practice on Upbringing Young Engineers Collaborated with Local Enterprises

NASA Astrophysics Data System (ADS)

Hiraki, Yutaka; Uno, Naotsugu; Tanaka, Yuichi; Iyama, Hirofumi; Yamashita, Toru; Miyamoto, Noritaka

The ministry of Economics and Industry started the project collaborated with National Colleges of Technology titled “Upbringing Young Engineers in small and medium-sized enterprises” , in 2006. In our college, the authors planed the upbringing-program for the die-cast engineer in automobile industries collaborated with several enterprises in neighboring area and applied for the project. The program was adopted and worked out the concrete curriculum for the first year. The curriculum contains the training of the base of mechanical design with 3D-CAD/CAE/CAM systems and the practical training on manufacturing, by means of Problem Based Learning method. The program carried out in September and finished in December successfully. This paper reports the outline of the curriculum and the results in the program.

Annotated bibliography of Software Engineering Laboratory (SEL) literature

NASA Technical Reports Server (NTRS)

Card, D.

1982-01-01

An annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory is presented. More than 75 publications are summarized. An index of these publications by subject is also included. These publications cover many areas of software engineering and range from research reports to software documentation.

Towards a Controlled Vocabulary on Software Engineering Education

ERIC Educational Resources Information Center

Pizard, Sebastián; Vallespir, Diego

2017-01-01

Software engineering is the discipline that develops all the aspects of the production of software. Although there are guidelines about what topics to include in a software engineering curricula, it is usually unclear which are the best methods to teach them. In any science discipline the construction of a classification schema is a common…

AADL and Model-based Engineering

DTIC Science & Technology

2014-10-20

and MBE Feiler, Oct 20, 2014 © 2014 Carnegie Mellon University We Rely on Software for Safe Aircraft Operation Embedded software systems ...D eveloper Compute Platform Runtime Architecture Application Software Embedded SW System Engineer Data Stream Characteristics Latency...confusion Hardware Engineer Why do system level failures still occur despite fault tolerance techniques being deployed in systems ? Embedded software

Intelligent Agents for Design and Synthesis Environments: My Summary

NASA Technical Reports Server (NTRS)

Norvig, Peter

1999-01-01

This presentation gives a summary of intelligent agents for design synthesis environments. We'll start with the conclusions, and work backwards to justify them. First, an important assumption is that agents (whatever they are) are good for software engineering. This is especially true for software that operates in an uncertain, changing environment. The "real world" of physical artifacts is like that: uncertain in what we can measure, changing in that things are always breaking down, and we must interact with non-software entities. The second point is that software engineering techniques can contribute to good design. There may have been a time when we wanted to build simple artifacts containing little or no software. But modern aircraft and spacecraft are complex, and rely on a great deal of software. So better software engineering leads to better designed artifacts, especially when we are designing a series of related artifacts and can amortize the costs of software development. The third point is that agents are especially useful for design tasks, above and beyond their general usefulness for software engineering, and the usefulness of software engineering to design.

NASA software documentation standard software engineering program

NASA Technical Reports Server (NTRS)

1991-01-01

The NASA Software Documentation Standard (hereinafter referred to as Standard) can be applied to the documentation of all NASA software. This Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. This basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

Improving Software Engineering on NASA Projects

NASA Technical Reports Server (NTRS)

Crumbley, Tim; Kelly, John C.

2010-01-01

Software Engineering Initiative: Reduces risk of software failure -Increases mission safety. More predictable software cost estimates and delivery schedules. Smarter buyer of contracted out software. More defects found and removed earlier. Reduces duplication of efforts between projects. Increases ability to meet the challenges of evolving software technology.

The 1993-94 Educational Software Preview Guide.

ERIC Educational Resources Information Center

Best, Anita, Ed.; Mathis, Judi, Ed.

This guide lists favorably reviewed, commercially available, microcomputer software for instructional use in preschool through grade 12. The guide is organized by the following curriculum areas: art; business education; computers; health; instructional tools, including authoring systems, computer assisted drafting (CAD), classroom management,…

Curriculum Connection: Create a Classroom Community.

ERIC Educational Resources Information Center

Donlan, Leni

1991-01-01

One elementary teacher runs her classroom as a technology-based token economy. Students hold classroom jobs and use software to track money earned, manage checking accounts, and disburse classroom cash. The strategy boosts math and technology skills. A list of software programs is included. (SM)

14 CFR Appendix D to Part 147 - Powerplant Curriculum Subjects

Code of Federal Regulations, 2013 CFR

2013-01-01

... a. reciprocating engines (1) 1. Inspect and repair a radial engine. (2) 2. Overhaul reciprocating.... Install, troubleshoot, and remove reciprocating engines. b. turbine engines (2) 5. Overhaul turbine engine. (3) 6. Inspect, check, service, and repair turbine engines and turbine engine installations. (3) 7...

14 CFR Appendix D to Part 147 - Powerplant Curriculum Subjects

Code of Federal Regulations, 2012 CFR

2012-01-01

... a. reciprocating engines (1) 1. Inspect and repair a radial engine. (2) 2. Overhaul reciprocating.... Install, troubleshoot, and remove reciprocating engines. b. turbine engines (2) 5. Overhaul turbine engine. (3) 6. Inspect, check, service, and repair turbine engines and turbine engine installations. (3) 7...

14 CFR Appendix D to Part 147 - Powerplant Curriculum Subjects

Code of Federal Regulations, 2014 CFR

2014-01-01

... a. reciprocating engines (1) 1. Inspect and repair a radial engine. (2) 2. Overhaul reciprocating.... Install, troubleshoot, and remove reciprocating engines. b. turbine engines (2) 5. Overhaul turbine engine. (3) 6. Inspect, check, service, and repair turbine engines and turbine engine installations. (3) 7...

14 CFR Appendix D to Part 147 - Powerplant Curriculum Subjects

Code of Federal Regulations, 2011 CFR

2011-01-01

... a. reciprocating engines (1) 1. Inspect and repair a radial engine. (2) 2. Overhaul reciprocating.... Install, troubleshoot, and remove reciprocating engines. b. turbine engines (2) 5. Overhaul turbine engine. (3) 6. Inspect, check, service, and repair turbine engines and turbine engine installations. (3) 7...

Automating Software Design Metrics.

DTIC Science & Technology

1984-02-01

INTRODUCTION 1 ", ... 0..1 1.2 HISTORICAL PERSPECTIVE High quality software is of interest to both the software engineering com- munity and its users. As...contributions of many other software engineering efforts, most notably [MCC 77] and [Boe 83b], which have defined and refined a framework for quantifying...AUTOMATION OF DESIGN METRICS Software metrics can be useful within the context of an integrated soft- ware engineering environment. The purpose of this

Advancements in Curriculum and Assessment by the Use of IMMEX Technology in the Organic Laboratory

ERIC Educational Resources Information Center

Cox, Charles T., Jr.; Cooper, Melanie M.; Pease, Rebecca; Buchanan, Krystal; Hernandez-Cruz, Laura; Stevens, Ron; Picione, John; Holme, Thomas

2008-01-01

The use of web-based software and course management systems for the delivery of online assessments in the chemistry classroom is becoming more common. IMMEX software, like other web-based software, can be used for delivering assessments and providing feedback, but differs in that it offers additional features designed to give insights and promote…

Use of Soft Computing Technologies for a Qualitative and Reliable Engine Control System for Propulsion Systems

NASA Technical Reports Server (NTRS)

Trevino, Luis; Brown, Terry; Crumbley, R. T. (Technical Monitor)

2001-01-01

The problem to be addressed in this paper is to explore how the use of Soft Computing Technologies (SCT) could be employed to improve overall vehicle system safety, reliability, and rocket engine performance by development of a qualitative and reliable engine control system (QRECS). Specifically, this will be addressed by enhancing rocket engine control using SCT, innovative data mining tools, and sound software engineering practices used in Marshall's Flight Software Group (FSG). The principle goals for addressing the issue of quality are to improve software management, software development time, software maintenance, processor execution, fault tolerance and mitigation, and nonlinear control in power level transitions. The intent is not to discuss any shortcomings of existing engine control methodologies, but to provide alternative design choices for control, implementation, performance, and sustaining engineering, all relative to addressing the issue of reliability. The approaches outlined in this paper will require knowledge in the fields of rocket engine propulsion (system level), software engineering for embedded flight software systems, and soft computing technologies (i.e., neural networks, fuzzy logic, data mining, and Bayesian belief networks); some of which are briefed in this paper. For this effort, the targeted demonstration rocket engine testbed is the MC-1 engine (formerly FASTRAC) which is simulated with hardware and software in the Marshall Avionics & Software Testbed (MAST) laboratory that currently resides at NASA's Marshall Space Flight Center, building 4476, and is managed by the Avionics Department. A brief plan of action for design, development, implementation, and testing a Phase One effort for QRECS is given, along with expected results. Phase One will focus on development of a Smart Start Engine Module and a Mainstage Engine Module for proper engine start and mainstage engine operations. The overall intent is to demonstrate that by employing soft computing technologies, the quality and reliability of the overall scheme to engine controller development is further improved and vehicle safety is further insured. The final product that this paper proposes is an approach to development of an alternative low cost engine controller that would be capable of performing in unique vision spacecraft vehicles requiring low cost advanced avionics architectures for autonomous operations from engine pre-start to engine shutdown.

A Review of the Suitability of Available Computer Aided Software Engineering (CASE) Tools for the Small Software Development Environment

DTIC Science & Technology

1989-07-11

LITERATURE CITED [Boeh73] Boehm, Barry W., "Software and its Impact: A Quantitative Assessment," Datamation, 19, 5, (May 1973), pp 48-59. [Boeh76...Boehm, Barry W., "Software Engineering," IEEE Transactions on Computers, C-25, 12, (December 1976), pp 1226-1241. [Boeh81a] Boehm, Barry W., Software...Engineering Economics, Prentice-Hall, Inc., Englewood Cliffs, NJ, (1981). [Boeh8lb] Boehm, Barry W., "An Experiment in Small Scale Application Software

Happy software developers solve problems better: psychological measurements in empirical software engineering

PubMed Central

Wang, Xiaofeng; Abrahamsson, Pekka

2014-01-01

For more than thirty years, it has been claimed that a way to improve software developers’ productivity and software quality is to focus on people and to provide incentives to make developers satisfied and happy. This claim has rarely been verified in software engineering research, which faces an additional challenge in comparison to more traditional engineering fields: software development is an intellectual activity and is dominated by often-neglected human factors (called human aspects in software engineering research). Among the many skills required for software development, developers must possess high analytical problem-solving skills and creativity for the software construction process. According to psychology research, affective states—emotions and moods—deeply influence the cognitive processing abilities and performance of workers, including creativity and analytical problem solving. Nonetheless, little research has investigated the correlation between the affective states, creativity, and analytical problem-solving performance of programmers. This article echoes the call to employ psychological measurements in software engineering research. We report a study with 42 participants to investigate the relationship between the affective states, creativity, and analytical problem-solving skills of software developers. The results offer support for the claim that happy developers are indeed better problem solvers in terms of their analytical abilities. The following contributions are made by this study: (1) providing a better understanding of the impact of affective states on the creativity and analytical problem-solving capacities of developers, (2) introducing and validating psychological measurements, theories, and concepts of affective states, creativity, and analytical-problem-solving skills in empirical software engineering, and (3) raising the need for studying the human factors of software engineering by employing a multidisciplinary viewpoint. PMID:24688866

Happy software developers solve problems better: psychological measurements in empirical software engineering.

PubMed

Graziotin, Daniel; Wang, Xiaofeng; Abrahamsson, Pekka

2014-01-01

For more than thirty years, it has been claimed that a way to improve software developers' productivity and software quality is to focus on people and to provide incentives to make developers satisfied and happy. This claim has rarely been verified in software engineering research, which faces an additional challenge in comparison to more traditional engineering fields: software development is an intellectual activity and is dominated by often-neglected human factors (called human aspects in software engineering research). Among the many skills required for software development, developers must possess high analytical problem-solving skills and creativity for the software construction process. According to psychology research, affective states-emotions and moods-deeply influence the cognitive processing abilities and performance of workers, including creativity and analytical problem solving. Nonetheless, little research has investigated the correlation between the affective states, creativity, and analytical problem-solving performance of programmers. This article echoes the call to employ psychological measurements in software engineering research. We report a study with 42 participants to investigate the relationship between the affective states, creativity, and analytical problem-solving skills of software developers. The results offer support for the claim that happy developers are indeed better problem solvers in terms of their analytical abilities. The following contributions are made by this study: (1) providing a better understanding of the impact of affective states on the creativity and analytical problem-solving capacities of developers, (2) introducing and validating psychological measurements, theories, and concepts of affective states, creativity, and analytical-problem-solving skills in empirical software engineering, and (3) raising the need for studying the human factors of software engineering by employing a multidisciplinary viewpoint.

Software technology insertion: A study of success factors

NASA Technical Reports Server (NTRS)

Lydon, Tom

1990-01-01

Managing software development in large organizations has become increasingly difficult due to increasing technical complexity, stricter government standards, a shortage of experienced software engineers, competitive pressure for improved productivity and quality, the need to co-develop hardware and software together, and the rapid changes in both hardware and software technology. The 'software factory' approach to software development minimizes risks while maximizing productivity and quality through standardization, automation, and training. However, in practice, this approach is relatively inflexible when adopting new software technologies. The methods that a large multi-project software engineering organization can use to increase the likelihood of successful software technology insertion (STI), especially in a standardized engineering environment, are described.

Engineering Technology Education: Bibliography 1989.

ERIC Educational Resources Information Center

Dyrud, Marilyn A., Comp.

1990-01-01

Over 200 references divided into 24 different areas are presented. Topics include administration, aeronautics, architecture, biomedical technology, CAD/CAM, civil engineering, computers, curriculum, electrical/electronics engineering, industrial engineering, industry and employment, instructional technology, laboratories, lasers, liberal studies,…

Web-Based Engine for Program Curriculum Designers

ERIC Educational Resources Information Center

Hamam, H.; Loucif, S.

2009-01-01

Educational institutions pay careful attention to the design of program curricula, which represent a framework to meet institutional goals and missions. Of course, the success of any institution depends highly on the quality of its program curriculum. The development of such a curriculum and, more importantly, the evaluation of its quality are…

The Creation of an Integrated Sustainability Curriculum and Student Praxis Projects

ERIC Educational Resources Information Center

Bacon, Christopher M.; Mulvaney, Dustin; Ball, Tamara B.; DuPuis, E. Melanie; Gliessman, Stephen R.; Lipschutz, Ronnie D.; Shakouri, Ali

2011-01-01

Purpose: The purpose of this paper is to share the content and early results from an interdisciplinary sustainability curriculum that integrates theory and practice (praxis). The curriculum links new topical courses concerning renewable energy, food, water, engineering and social change with specialized labs that enhance technological and…

Systematic Approaches for Identifying and Organizing Content for Training Programs.

ERIC Educational Resources Information Center

Ammerman, Harry L.

This paper concentrates on two aspects in the development of curriculums for technical training: the identification of curriculum content for specific courses of study; and the organization of such content in training programs. Seven steps in the HumRRO procedure for systematic curriculum engineering are identified: determining the performance…

Defense AT&L Magazine: A Publication of the Defense Acquisition University. Volume 34, Number 3, DAU 184

DTIC Science & Technology

2005-01-01

developed a partnership with the Defense Acquisition University to in- tegrate DISA’s systems engineering processes, software , and network...in place, with processes being implemented: deployment management; systems engineering ; software engineering ; configuration man- agement; test and...CSS systems engineering is a transition partner with Carnegie Mellon University’s Software Engineering Insti- tute and its work on the capability

Introducing Emerging Technologies in the Curriculum through a Multidisciplinary Research Experience.

ERIC Educational Resources Information Center

Newell, James A.; Farrell, Stephanie H.; Hesketh, Robert P.; Slater, C. Stewart

2001-01-01

Describes the multidisciplinary teaching approach implemented at Rowan University's engineering department. Explains how emerging technologies are integrated into the curriculum. (Contains 19 references.) (YDS)

Industrial Education. "Small Engines".

ERIC Educational Resources Information Center

Parma City School District, OH.

Part of a series of curriculum guides dealing with industrial education in junior high schools, this guide provides the student with information and manipulative experiences on small gasoline engines. Included are sections on shop adjustment, safety, small engines, internal combustion, engine construction, four stroke engines, two stroke engines,…

Shuttle avionics software trials, tribulations and success

NASA Technical Reports Server (NTRS)

Henderson, O. L.

1985-01-01

The early problems and the solutions developed to provide the required quality software needed to support the space shuttle engine development program are described. The decision to use a programmable digital control system on the space shuttle engine was primarily based upon the need for a flexible control system capable of supporting the total engine mission on a large complex pump fed engine. The mission definition included all control phases from ground checkout through post shutdown propellant dumping. The flexibility of the controller through reprogrammable software allowed the system to respond to the technical challenges and innovation required to develop both the engine and controller hardware. This same flexibility, however, placed a severe strain on the capability of the software development and verification organization. The overall development program required that the software facility accommodate significant growth in both the software requirements and the number of software packages delivered. This challenge was met by reorganization and evolution in the process of developing and verifying software.

Biochemical Engineering Fundamentals

ERIC Educational Resources Information Center

Bailey, J. E.; Ollis, D. F.

1976-01-01

Discusses a biochemical engineering course that is offered as part of a chemical engineering curriculum and includes topics that influence the behavior of man-made or natural microbial or enzyme reactors. (MLH)

Curriculum Enrichment with Computer Software: Adventures in the Trade.

ERIC Educational Resources Information Center

Wassermann, Selma

2001-01-01

Creating a CD-ROM to enrich the 11th-grade social-studies curriculum was challenging, but rewarding. Draft storyboards and stock World War II footage soon led to a digital production called "Presumed Enemies," which put the events surrounding the internment of Japanese Canadians and Japanese Americans into historical context. (MLH)

IS Curriculum Recommendations for Web Courses in Higher Education

ERIC Educational Resources Information Center

Cho, Juyun; Couraud, Jason

2013-01-01

A wide variety of software tools is currently available to businesses when building e-commerce solutions. Businesses are in need of employees with the appropriate skills to support and implement their e-commerce solutions. Students transitioning from school into the workforce need a well-designed curriculum that can prepare them with the skills…

Integrating Technology into the K-12 Music Curriculum.

ERIC Educational Resources Information Center

Washington Office of the State Superintendent of Public Instruction, Olympia.

This guide is intended to provide resources for integrating technology into the K-12 music curriculum. The focus of the guide is on computer software and the use of MIDI (Musical Instrument Digital Interface) in the music classroom. The guide gives two examples of commercially available curricula that integrate technology as well as lesson plans…

The Systems Thinking and Curriculum Innovation Project. Technical Report, Part 2.

ERIC Educational Resources Information Center

Mandinach, Ellen B.; Thorpe, Margaret E.

This is the second of two reports on the first year activities and results of the Systems Thinking and Curriculum Innovation Project (STACI), a two-year project which is examining the cognitive demands and consequences of using the STELLA (Structural Thinking Experimental Learning Laboratory with Animation) software to teach systems thinking,…

Effects of a Preschool Mathematics Curriculum: Summative Research on the "Building Blocks" Project

ERIC Educational Resources Information Center

Clements, Douglas H.; Sarama, Julie

2007-01-01

This study evaluated the efficacy of a preschool mathematics program based on a comprehensive model of developing research-based software and print curricula. Building Blocks, funded by the National Science Foundation, is a curriculum development project focused on creating research-based, technology-enhanced mathematics materials for pre-K…

Using the Curriculum Vita To Study the Career Paths of Scientists and Engineers: An Assessment.

ERIC Educational Resources Information Center

Lane, Eliesh O'Neil; Dietz, James S.; Chompalov, Ivan; Bozeman, Barry; Park, Jongwon

The usefulness of the curriculum vita (CV) as a data source for examining the career paths of scientists and engineers was studied. CVs were obtained in response to an e-mail message sent to researchers working in the area of biotechnology who were funded by the National Science Foundation (55 responses) or listed as authors (industry only) in the…

Engine Tune-Up Service. Unit 3: Primary Circuit. Student Guide. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Bacon, E. Miles

This student guide is for Unit 3, Primary Circuit, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with how to test the primary ignition circuit. A companion review exercise book and posttests are available separately as CE 031 212-213. An introduction tells how this unit fits into the total tune-up service,…

Engine Tune-up Service. Unit 2: Charging System. Student Guide. Automotive Mechanics Curriculum.

ERIC Educational Resources Information Center

Richardson, Roger L.; Bacon, E. Miles

This student guide is for Unit 2, Charging System, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with how to test the charging system. A companion review exercise book and posttests are available separately as CE 031 209-210. An introduction tells how this unit fits into the total tune-up service, defines…

Effects of a Problem-Based Learning Program on Engineering Students' Academic Achievements, Skills Development and Attitudes in a Mexican University.

ERIC Educational Resources Information Center

Polanco, Rodrigo; Calderon, Patricia; Delgado, Franciso

A 3-year follow-up evaluation was conducted of an experimental problem-based learning (PBL) integrated curriculum directed to students of the first 2 years of engineering. The PBL curriculum brought together the contents of physics, mathematics, and computer science courses in a single course in which students worked on real-life problems. In…

Proceedings of the Thirteenth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1988-01-01

Topics covered in the workshop included studies and experiments conducted in the Software Engineering Laboratory (SEL), a cooperative effort of NASA Goddard Space Flight Center, the University of Maryland, and Computer Sciences Corporation; software models; software products; and software tools.

An interdisciplinary collaboration between computer engineering and mathematics/bilingual education to develop a curriculum for underrepresented middle school students

NASA Astrophysics Data System (ADS)

Celedón-Pattichis, Sylvia; LópezLeiva, Carlos Alfonso; Pattichis, Marios S.; Llamocca, Daniel

2013-12-01

There is a strong need in the United States to increase the number of students from underrepresented groups who pursue careers in Science, Technology, Engineering, and Mathematics. Drawing from sociocultural theory, we present approaches to establishing collaborations between computer engineering and mathematics/bilingual education faculty to address this need. We describe our work through the Advancing Out-of-School Learning in Mathematics and Engineering project by illustrating how an integrated curriculum that is based on mathematics with applications in image and video processing can be designed and how it can be implemented with middle school students from underrepresented groups.

Promoting innovation: Enhancing transdisciplinary opportunities for medical and engineering students.

PubMed

Brazile, Tiffany; Hostetter Shoop, Glenda; McDonough, Christine M; Van Citters, Douglas W

2018-01-30

Addressing current healthcare challenges requires innovation and collaboration. Current literature provides limited guidance in promoting these skills in medical school. One approach involves transdisciplinary training in which students from different disciplines work together toward a shared goal. We assessed the need for such a curriculum at Dartmouth College. We surveyed medical and engineering students' educational values; learning experiences; professional goals; and interest in transdisciplinary education and innovation. Data were analyzed using descriptive statistics. Shared values among student groups included leadership development, innovation, collaboration, and resource sharing. Medical students felt their curriculum inadequately addressed creativity and innovation relative to their engineering counterparts (p < 0.05). Medical students felt less prepared for entrepreneurial activities (p < 0.05), while engineering students indicated a need for basic medical knowledge and patient-oriented design factors. Despite strong interest, collaboration was less than 50% of indicated interest. Medical and engineering students share an interest in the innovation process and need a shared curriculum to facilitate collaboration. A transdisciplinary course that familiarizes students with this process has the potential to promote physicians and engineers as leaders and innovators who can effectively work across industry lines. A transdisciplinary course was piloted in Spring 2017.

Autochthonous Change: Self-Renewal through Open Software Design

ERIC Educational Resources Information Center

Hedbring, Charles

2005-01-01

In all likelihood, currently employed therapists and teachers grew up with computer technology. Part of their computer culture included programming computers for entertainment using popular consumer software like Microsoft Basic. Within this social-educational milieu, the "FACTS+" curriculum represents one long-term project covering the…

Teaching with Technology. Software That's Right for You.

ERIC Educational Resources Information Center

Allen, Denise

1995-01-01

Recommends software to help teachers plan curriculum in the areas of comprehensive language arts ("Cornerstone"); writing and information ("Keroppi Day Hopper"); creative writing and imagination ("Imagination Express"); reading ("Jo-Jo's Reading Circus"); math ("Careers in Math: From Architects to Astronauts") and nature ("Eyewitness"). Provides…

Teaching medical management and operations engineering for systems-based practice to radiology residents.

PubMed

Brandon, Catherine J; Mullan, Patricia B

2013-03-01

To better prepare radiology residents for providing care within the context of the larger health care system, this study evaluated the feasibility and impact of a curriculum to enhance radiology residents' understanding and ability to apply concepts from medical management and industrial and operational engineering to systems-based practice problems in radiology practice. A multiprofessional team including radiology, medical education, and industrial and operational engineering professionals collaborated in developing a seven-module curriculum, including didactic lectures, interactive large-group analysis, and small-group discussions with case-based radiology examples, which illustrated real-life management issues and the roles physicians held. Residents and faculty participated in topic selection. Pre- and post-instruction formative assessments were administered, and results were shared with residents during teaching sessions. Attendance and participation in case-based scenario resolutions indicate the feasibility and impact of the interactive curriculum on residents' interest and ability to apply curricular concepts to systems-based practice in radiology. Paired t test analyses (P < .05) and effect sizes showed residents significantly increased their knowledge and ability to apply concepts to systems-based practice issues in radiology. Our iterative curriculum development and implementation process demonstrated need and support for a multiprofessional team approach to teach management and operational engineering concepts. Curriculum topics are congruent with Accreditation Council for Graduate Medical Education requirements for systems-based practice. The case-based curriculum using a mixed educational format of didactic lectures and small-group discussion and problem analysis could be adopted for other radiology programs, for both residents and continuing medical education applications. Copyright © 2013 AUR. Published by Elsevier Inc. All rights reserved.

A New Approach to Developing Interactive Software Modules Through Graduate Education

NASA Astrophysics Data System (ADS)

Sanders, Nathan E.; Faesi, Chris; Goodman, Alyssa A.

2014-06-01

Educational technology has attained significant importance as a mechanism for supporting experiential learning of science concepts. However, the growth of this mechanism is limited by the significant time and technical expertise needed to develop such products, particularly in specialized fields of science. We sought to test whether interactive, educational, online software modules can be developed effectively by students as a curriculum component of an advanced science course. We discuss a set of 15 such modules developed by Harvard University graduate students to demonstrate various concepts related to astronomy and physics. Their successful development of these modules demonstrates that online software tools for education and outreach on specialized topics can be produced while simultaneously fulfilling project-based learning objectives. We describe a set of technologies suitable for module development and present in detail four examples of modules developed by the students. We offer recommendations for incorporating educational software development within a graduate curriculum and conclude by discussing the relevance of this novel approach to new online learning environments like edX.

Averting Denver Airports on a Chip

NASA Technical Reports Server (NTRS)

Sullivan, Kevin J.

1995-01-01

As a result of recent advances in software engineering capabilities, we are now in a more stable environment. De-facto hardware and software standards are emerging. Work on software architecture and design patterns signals a consensus on the importance of early system-level design decisions, and agreements on the uses of certain paradigmatic software structures. We now routinely build systems that would have been risky or infeasible a few years ago. Unfortunately, technological developments threaten to destabilize software design again. Systems designed around novel computing and peripheral devices will spark ambitious new projects that will stress current software design and engineering capabilities. Micro-electro-mechanical systems (MEMS) and related technologies provide the physical basis for new systems with the potential to produce this kind of destabilizing effect. One important response to anticipated software engineering and design difficulties is carefully directed engineering-scientific research. Two specific problems meriting substantial research attention are: A lack of sufficient means to build software systems by generating, extending, specializing, and integrating large-scale reusable components; and a lack of adequate computational and analytic tools to extend and aid engineers in maintaining intellectual control over complex software designs.

Software Management Metrics

DTIC Science & Technology

1988-05-01

obtained from Dr. Barry Boehm’s Software 5650, Contract No. F19628-86-C-O001, Engineering Economics [1] and from T. J. ESD/MITRE Software Center Acquisition...of References 1. Boehm, Barry W., SoJtware Engineering 3. Halstead, M. H., Elements of SoJhtare Economics, Englewood Cliffs, New Science, New York...1983, pp. 639-648. 35 35 - Bibliography Beizer, B., Software System Testing and Pressman , Roger S., Software Engineering:QualtyO Assurance, New York: Van

SOFTWARE ENGINEERING INSTITUTE (SEI)

EPA Science Inventory

The Software Engineering Institute (SEI) is a federally funded research and development center established in 1984 by the U.S. Department of Defense and operated by Carnegie Mellon University. SEI has a broad charter to provide leadership in the practice of software engineering t...

7 Processes that Enable NASA Software Engineering Technologies: Value-Added Process Engineering

NASA Technical Reports Server (NTRS)

Housch, Helen; Godfrey, Sally

2011-01-01

The presentation reviews Agency process requirements and the purpose, benefits, and experiences or seven software engineering processes. The processes include: product integration, configuration management, verification, software assurance, measurement and analysis, requirements management, and planning and monitoring.

Methodology for automating software systems. Task 1 of the foundations for automating software systems

NASA Technical Reports Server (NTRS)

Moseley, Warren

1989-01-01

The early stages of a research program designed to establish an experimental research platform for software engineering are described. Major emphasis is placed on Computer Assisted Software Engineering (CASE). The Poor Man's CASE Tool is based on the Apple Macintosh system, employing available software including Focal Point II, Hypercard, XRefText, and Macproject. These programs are functional in themselves, but through advanced linking are available for operation from within the tool being developed. The research platform is intended to merge software engineering technology with artificial intelligence (AI). In the first prototype of the PMCT, however, the sections of AI are not included. CASE tools assist the software engineer in planning goals, routes to those goals, and ways to measure progress. The method described allows software to be synthesized instead of being written or built.

Hands-on curriculum teaches biomedical engineering concepts to home-schooled students.

PubMed

Sagstetter, Ann M; Nimunkar, Amit J; Tompkins, Willis J

2009-01-01

University level outreach has increased over the last decade to stimulate K-12 student interest in engineering related fields. Home schooling students are one of the groups that are valued for engineering admissions due to diligent study habits and high achievement scores. However, home schooled students have inadequate access to science, math, and engineering related resources, which precludes the development of interdisciplinary teaching methods. To address this problem, we have developed a hands-on, STEM based curriculum as a safe and comprehensive supplement to current home schooling curricula. The ultimate goal is to stimulate university-student relations and subsequently increase engineering recruitment opportunities. Our pre and post workshop survey comparisons demonstrate that integrating disciplines, via the manner presented in this study, provides a K-12 student-friendly engineering learning method.

IEEE Conference on Software Engineering Education and Training (CSEE&T 2012) Proceedings (25th, Nanjing, Jiangsu, China, April 17-19, 2012)

ERIC Educational Resources Information Center

IEEE Conference on Software Engineering Education and Training, Proceedings (MS), 2012

2012-01-01

The Conference on Software Engineering Education and Training (CSEE&T) is the premier international peer-reviewed conference, sponsored by the Institute of Electrical and Electronics Engineers, Inc. (IEEE) Computer Society, which addresses all major areas related to software engineering education, training, and professionalism. This year, as…

Education in Engineering and Ecohydrology for Fish Passage

NASA Astrophysics Data System (ADS)

Ahlfeld, D.; Towler, B.

2011-12-01

Historical fish migration routes linking feeding and spawning habitats have been significantly impacted by culverts, dikes, dams, and other barriers on waterways throughout the world. For example an estimated 2.5 million barriers to fish migration exist in the United States. In recent years, there has been an increased focus on removing or mitigating these barriers as an efficient mechanism to restore habitat. Effective design and implementation of these measures requires specialists with skills at the intersection of engineering, hydrology and biology. Recognizing the need for a cadre of engineers with the additional skills in hydraulics and ecohydrology needed to analyze and design solutions for enhancing fish passage in streams and rivers, the University of Massachusetts Amherst now offers a Master of Science in Civil Engineering (MSCE) degree with a specialization in Fish Passage Engineering. The curriculum is offered in conjunction with the U.S. Fish and Wildlife Service and is informed by the recommendations of the Curriculum Working Group of the Bioengineering Section of the American Fisheries Society. The curriculum is offered through the Department of Civil and Environmental Engineering. This presentation will describe the motivation for the degree, the content of coursework and the challenges inherent in developing an interdisciplinary education program spanning biogeosciences and engineering.

Modelling of diesel engine fuelled with biodiesel using engine simulation software

NASA Astrophysics Data System (ADS)

Said, Mohd Farid Muhamad; Said, Mazlan; Aziz, Azhar Abdul

2012-06-01

This paper is about modelling of a diesel engine that operates using biodiesel fuels. The model is used to simulate or predict the performance and combustion of the engine by simplified the geometry of engine component in the software. The model is produced using one-dimensional (1D) engine simulation software called GT-Power. The fuel properties library in the software is expanded to include palm oil based biodiesel fuels. Experimental works are performed to investigate the effect of biodiesel fuels on the heat release profiles and the engine performance curves. The model is validated with experimental data and good agreement is observed. The simulation results show that combustion characteristics and engine performances differ when biodiesel fuels are used instead of no. 2 diesel fuel.

Milestones in Software Engineering and Knowledge Engineering History: A Comparative Review

PubMed Central

del Águila, Isabel M.; Palma, José; Túnez, Samuel

2014-01-01

We present a review of the historical evolution of software engineering, intertwining it with the history of knowledge engineering because “those who cannot remember the past are condemned to repeat it.” This retrospective represents a further step forward to understanding the current state of both types of engineerings; history has also positive experiences; some of them we would like to remember and to repeat. Two types of engineerings had parallel and divergent evolutions but following a similar pattern. We also define a set of milestones that represent a convergence or divergence of the software development methodologies. These milestones do not appear at the same time in software engineering and knowledge engineering, so lessons learned in one discipline can help in the evolution of the other one. PMID:24624046

Milestones in software engineering and knowledge engineering history: a comparative review.

PubMed

del Águila, Isabel M; Palma, José; Túnez, Samuel

2014-01-01

We present a review of the historical evolution of software engineering, intertwining it with the history of knowledge engineering because "those who cannot remember the past are condemned to repeat it." This retrospective represents a further step forward to understanding the current state of both types of engineerings; history has also positive experiences; some of them we would like to remember and to repeat. Two types of engineerings had parallel and divergent evolutions but following a similar pattern. We also define a set of milestones that represent a convergence or divergence of the software development methodologies. These milestones do not appear at the same time in software engineering and knowledge engineering, so lessons learned in one discipline can help in the evolution of the other one.

A software engineering approach to expert system design and verification

NASA Technical Reports Server (NTRS)

Bochsler, Daniel C.; Goodwin, Mary Ann

1988-01-01

Software engineering design and verification methods for developing expert systems are not yet well defined. Integration of expert system technology into software production environments will require effective software engineering methodologies to support the entire life cycle of expert systems. The software engineering methods used to design and verify an expert system, RENEX, is discussed. RENEX demonstrates autonomous rendezvous and proximity operations, including replanning trajectory events and subsystem fault detection, onboard a space vehicle during flight. The RENEX designers utilized a number of software engineering methodologies to deal with the complex problems inherent in this system. An overview is presented of the methods utilized. Details of the verification process receive special emphasis. The benefits and weaknesses of the methods for supporting the development life cycle of expert systems are evaluated, and recommendations are made based on the overall experiences with the methods.

Consistent Evolution of Software Artifacts and Non-Functional Models

DTIC Science & Technology

2014-11-14

induce bad software performance)? 15. SUBJECT TERMS EOARD, Nano particles, Photo-Acoustic Sensors, Model-Driven Engineering ( MDE ), Software Performance...Università degli Studi dell’Aquila, Via Vetoio, 67100 L’Aquila, Italy Email: vittorio.cortellessa@univaq.it Web : http: // www. di. univaq. it/ cortelle/ Phone...Model-Driven Engineering ( MDE ), Software Performance Engineering (SPE), Change Propagation, Performance Antipatterns. For sake of readability of the

A self-referential HOWTO on release engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Galassi, Mark C.

Release engineering is a fundamental part of the software development cycle: it is the point at which quality control is exercised and bug fixes are integrated. The way in which software is released also gives the end user her first experience of a software package, while in scientific computing release engineering can guarantee reproducibility. For these reasons and others, the release process is a good indicator of the maturity and organization of a development team. Software teams often do not put in place a release process at the beginning. This is unfortunate because the team does not have early andmore » continuous execution of test suites, and it does not exercise the software in the same conditions as the end users. I describe an approach to release engineering based on the software tools developed and used by the GNU project, together with several specific proposals related to packaging and distribution. I do this in a step-by-step manner, demonstrating how this very paper is written and built using proper release engineering methods. Because many aspects of release engineering are not exercised in the building of the paper, the accompanying software repository also contains examples of software libraries.« less

The Effect of AOP on Software Engineering, with Particular Attention to OIF and Event Quantification

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Filman, Robert; Korsmeyer, David (Technical Monitor)

2003-01-01

We consider the impact of Aspect-Oriented Programming on Software Engineering, and, in particular, analyze two AOP systems, one of which does component wrapping and the other, quantification over events, for their software engineering effects.

Second Generation Product Line Engineering Takes Hold in the DoD

DTIC Science & Technology

2014-01-01

Feature- Oriented Domain Analysis ( FODA ) Feasibility Study” (CMU/SEI-90- TR-021, ADA235785). Pittsburgh, PA: Software Engineering Institute...software product line engineering and software architecture documentation and analysis . Clements is co-author of three practitioner-oriented books about

Integrating the Master of Software Assurance Reference Curriculum into the Model Curriculum and Guidelines for Graduate Degree Programs in Information Systems

DTIC Science & Technology

2011-02-01

Model Curriculum and Guidelines for Graduate Degree Programs in Information Systems (MSIS) 2006 is the latest product of a project that has been...conducted for nearly 40 years [Gor- gone 2006]. Various organizations affiliated with the project have developed specifications for the teaching of...considerations helps ensure that an institution’s individual courses of study are relevant to the industry that its students are preparing to enter

Collected Software Engineering Papers, Volume 10

NASA Technical Reports Server (NTRS)

1992-01-01

This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from Oct. 1991 - Nov. 1992. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. Additional information about the SEL and its research efforts may be obtained from the sources listed in the bibliography at the end of this document. For the convenience of this presentation, the 11 papers contained here are grouped into 5 major sections: (1) the Software Engineering Laboratory; (2) software tools studies; (3) software models studies; (4) software measurement studies; and (5) Ada technology studies.

From Classroom to Computer Screen: NWLP Software. A Set of Computerized Garment-Related Bilingual (English and Chinese) Literacy Lessons.

ERIC Educational Resources Information Center

Whu, Lin Fai; Zhang, Ai Ling

This document describes how National Workplace Literacy Program (NWLP) software was developed for Chinese garment workers in New York City. First, it discusses the goal of the workplace literacy program and the nature of the population served. Then, it indicates how NWLP software was designed to supplement the NWLP curriculum and to reinforce the…

Isothermal Titration Calorimetry Can Provide Critical Thinking Opportunities

ERIC Educational Resources Information Center

Moore, Dale E.; Goode, David R.; Seney, Caryn S.; Boatwright, Jennifer M.

2016-01-01

College chemistry faculties might not have considered including isothermal titration calorimetry (ITC) in their majors' curriculum because experimental data from this instrumental method are often analyzed via automation (software). However, the software-based data analysis can be replaced with a spreadsheet-based analysis that is readily…

Focus on the Presidency.

ERIC Educational Resources Information Center

Lindroth, Linda K.

1996-01-01

Uses Presidential and House of Representatives elections as basis for year-long curriculum focus on civics education, integrating print material, software, and the Internet. Describes classroom activities, Internet sites, and software described for four major areas: (1) campaigning for office; (2) moving into a new home; (3) reporting for work;…

Microcomputers in the Curriculum: Micros and the First R.

ERIC Educational Resources Information Center

Balajthy, Ernest; Reinking, David

1985-01-01

Introduces the range of computer software currently available to aid in developing children's basic skills in reading, including programs for reading readiness, word recognition, vocabulary development, reading comprehension, and learning motivation. Additional information on software and computer use is provided in sidebars by Gwen Solomon and…

Marginalized Student Access to Technology Education

ERIC Educational Resources Information Center

Kurtcu, Wanda M.

2017-01-01

The purpose of this paper is to investigate how a teacher can disrupt an established curriculum that continues the cycle of inequity of access to science, technology, engineering, and math (STEM) curriculum by students in alternative education. For this paper, I will focus on the technology components of the STEM curriculum. Technology in the…

Undergraduate Course and Curriculum Development Program and Calculus and the Bridge to Calculus Program: 1993 Awards.

ERIC Educational Resources Information Center

National Science Foundation, Arlington, VA. Div. of Undergraduate Education.

The Undergraduate Course and Curriculum Development Program of the National Science Foundation supports the development of courses in all disciplines to improve the quality of undergraduate courses and curricula in science, mathematics, engineering, and technology. The purpose of the program in Curriculum Development in Mathematics: Calculus and…

A Study of Mathematics Infusion in Middle School Technology Education Classes

ERIC Educational Resources Information Center

Burghardt, M. David; Hecht, Deborah; Russo, Maria; Lauckhardt, James; Hacker, Michael

2010-01-01

The present study examined the impact of introducing a mathematics infused engineering/technology education (ETE) curriculum on students' mathematics content knowledge and attitudes toward mathematics. The purpose of the present study was to: (a) compare the effects of a mathematics infused ETE curriculum and a control curriculum on student…

Exploring Teacher Design Team Endeavors While Creating an Elementary-Focused STEM-Integrated Curriculum

ERIC Educational Resources Information Center

McFadden, Justin R.; Roehrig, Gillian H.

2017-01-01

Background: This study presents two teacher design teams (TDTs) during a professional development experience centered on science, technology, engineering, and mathematics (STEM)-integrated curriculum development. The main activity of the study, curriculum design, was framed as a design problem in order to better understand how teachers engaged…

An Architecture, System Engineering, and Acquisition Approach for Space System Software Resiliency

NASA Astrophysics Data System (ADS)

Phillips, Dewanne Marie

Software intensive space systems can harbor defects and vulnerabilities that may enable external adversaries or malicious insiders to disrupt or disable system functions, risking mission compromise or loss. Mitigating this risk demands a sustained focus on the security and resiliency of the system architecture including software, hardware, and other components. Robust software engineering practices contribute to the foundation of a resilient system so that the system "can take a hit to a critical component and recover in a known, bounded, and generally acceptable period of time". Software resiliency must be a priority and addressed early in the life cycle development to contribute a secure and dependable space system. Those who develop, implement, and operate software intensive space systems must determine the factors and systems engineering practices to address when investing in software resiliency. This dissertation offers methodical approaches for improving space system resiliency through software architecture design, system engineering, increased software security, thereby reducing the risk of latent software defects and vulnerabilities. By providing greater attention to the early life cycle phases of development, we can alter the engineering process to help detect, eliminate, and avoid vulnerabilities before space systems are delivered. To achieve this objective, this dissertation will identify knowledge, techniques, and tools that engineers and managers can utilize to help them recognize how vulnerabilities are produced and discovered so that they can learn to circumvent them in future efforts. We conducted a systematic review of existing architectural practices, standards, security and coding practices, various threats, defects, and vulnerabilities that impact space systems from hundreds of relevant publications and interviews of subject matter experts. We expanded on the system-level body of knowledge for resiliency and identified a new software architecture framework and acquisition methodology to improve the resiliency of space systems from a software perspective with an emphasis on the early phases of the systems engineering life cycle. This methodology involves seven steps: 1) Define technical resiliency requirements, 1a) Identify standards/policy for software resiliency, 2) Develop a request for proposal (RFP)/statement of work (SOW) for resilient space systems software, 3) Define software resiliency goals for space systems, 4) Establish software resiliency quality attributes, 5) Perform architectural tradeoffs and identify risks, 6) Conduct architecture assessments as part of the procurement process, and 7) Ascertain space system software architecture resiliency metrics. Data illustrates that software vulnerabilities can lead to opportunities for malicious cyber activities, which could degrade the space mission capability for the user community. Reducing the number of vulnerabilities by improving architecture and software system engineering practices can contribute to making space systems more resilient. Since cyber-attacks are enabled by shortfalls in software, robust software engineering practices and an architectural design are foundational to resiliency, which is a quality that allows the system to "take a hit to a critical component and recover in a known, bounded, and generally acceptable period of time". To achieve software resiliency for space systems, acquirers and suppliers must identify relevant factors and systems engineering practices to apply across the lifecycle, in software requirements analysis, architecture development, design, implementation, verification and validation, and maintenance phases.

Open Biomedical Engineering education in Africa.

PubMed

Ahluwalia, Arti; Atwine, Daniel; De Maria, Carmelo; Ibingira, Charles; Kipkorir, Emmauel; Kiros, Fasil; Madete, June; Mazzei, Daniele; Molyneux, Elisabeth; Moonga, Kando; Moshi, Mainen; Nzomo, Martin; Oduol, Vitalice; Okuonzi, John

2015-08-01

Despite the virtual revolution, the mainstream academic community in most countries remains largely ignorant of the potential of web-based teaching resources and of the expansion of open source software, hardware and rapid prototyping. In the context of Biomedical Engineering (BME), where human safety and wellbeing is paramount, a high level of supervision and quality control is required before open source concepts can be embraced by universities and integrated into the curriculum. In the meantime, students, more than their teachers, have become attuned to continuous streams of digital information, and teaching methods need to adapt rapidly by giving them the skills to filter meaningful information and by supporting collaboration and co-construction of knowledge using open, cloud and crowd based technology. In this paper we present our experience in bringing these concepts to university education in Africa, as a way of enabling rapid development and self-sufficiency in health care. We describe the three summer schools held in sub-Saharan Africa where both students and teachers embraced the philosophy of open BME education with enthusiasm, and discuss the advantages and disadvantages of opening education in this way in the developing and developed world.

Updating the biomedical engineering curriculum: Inclusion of Health Technology Assessment subjects.

PubMed

Martinez Licona, Fabiola; Urbina, Edmundo Gerardo; Azpiroz-Leehan, Joaquin

2010-01-01

This paper describes the work being carried out at Metropolitan Autonomous University (UAM) in Mexico City with regard to the continuous evaluation and updating of the Biomedical Engineering (BME) curriculum. In particular the courses regarded as part of the BME basic branch are reduced and new sets of elective subjects are proposed in order to bring closer the research work at UAM with the subjects in the BME curriculum. Special emphasis is placed on subjects dealing with Health Technology Assessment (HTA) and Health economics, as this branch of the BME discipline is quite promising in Mexico, but there are very few professionals in the field with adequate qualifications.

The Roles of Engineering Notebooks in Shaping Elementary Engineering Student Discourse and Practice

ERIC Educational Resources Information Center

Hertel, Jonathan D.; Cunningham, Christine M.; Kelly, Gregory J.

2017-01-01

Engineering design challenges offer important opportunities for students to learn science and engineering knowledge and practices. This study examines how students' engineering notebooks across four units of the curriculum "Engineering is Elementary" (EiE) support student work during design challenges. Through educational ethnography and…

Development of Concept-Based Physiology Lessons for Biomedical Engineering Undergraduate Students

ERIC Educational Resources Information Center

Nelson, Regina K.; Chesler, Naomi C.; Strang, Kevin T.

2013-01-01

engineering curriculum. In one or two introductory physiology courses, engineering students must learn physiology sufficiently to support learning in their subsequent engineering courses and careers. As preparation for future learning, physiology instruction centered on concepts may…

Engineering Enrollments, Fall 1986.

ERIC Educational Resources Information Center

Ellis, Richard A.

1987-01-01

Reports on the results of the Engineering Manpower Commission's 1986 survey of engineering enrollments, comparing them to the previous ten years of surveys. Provides tables of fall 1986 engineering enrollments categorized by curriculum, women, minorities, foreign nationals, schools, and by all students. (TW)

Evan Weaver | NREL

Science.gov Websites

Evan Weaver Photo of Evan Weaver Evan Weaver Researcher III-Software Engineering Evan.Weaver , he works as a software engineer developing whole-building energy modeling tools. Prior to joining NREL, he worked in the biomedical industry as a software engineer, specializing in graphical user

Requirements Engineering in Building Climate Science Software

ERIC Educational Resources Information Center

Batcheller, Archer L.

2011-01-01

Software has an important role in supporting scientific work. This dissertation studies teams that build scientific software, focusing on the way that they determine what the software should do. These requirements engineering processes are investigated through three case studies of climate science software projects. The Earth System Modeling…

Diesel Technology: Engines. [Teacher and Student Editions.

ERIC Educational Resources Information Center

Barbieri, Dave; Miller, Roger; Kellum, Mary

Competency-based teacher and student materials on diesel engines are provided for a diesel technology curriculum. Seventeen units of instruction cover the following topics: introduction to engine principles and procedures; engine systems and components; fuel systems; engine diagnosis and maintenance. The materials are based on the…

Utility operations review of North Carolina State University BSNE curriculum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bishop, E.A.; Faggart, E.M.; Jackson, G.D.

1988-01-01

The industry advisors group of the North Carolina State University (NCSU) Department of Nuclear Engineering raised the question of how well the curriculum for a bachelor of science in nuclear engineering (BSNE) meets the needs of educating students to enter the nuclear operations field. The concern was that the nuclear industry has evolved from a design to an operations mode, but that the BSNE curriculum may not have responded to this evolution. To address this issue, a group of four persons qualified as senior reactor operators with operational experience from different utilities was selected. The authors are the members ofmore » this review group. All are degreed personnel, with three BSNE graduates from NCSU, and all have participated in nuclear plant startups and currently work at nuclear plant sites. The group prepared by reviewing the curriculum before arriving on campus, including the report developed for the Accreditation Board for Engineering and Technology. During our two-day campus visit, we reviewed course materials, interviewed professors, and toured laboratory and reactor facilities in order to get more insight into the breadth and thrust of the BSNE curriculum. The observations and recommendations contained in this paper were developed based on these reviews and discussions and represent the opinions of the authors and not necessarily their companies.« less

Moving Beyond the Single Center--Ways to Reinforce Molecular Orbital Theory in an Inorganic Course

ERIC Educational Resources Information Center

Cass, Marion E.; Hollingsworth, William E.

2004-01-01

It is suggested that molecular theory should be taught earlier in the inorganic chemistry curriculum even in the introductory chemistry course in order to integrate molecular orbital arguments more effectively throughout the curriculum. The method of teaching relies on having access to molecular modeling software as having access to such software…

Expanding Approaches for Understanding Impact: Integrating Technology, Curriculum, and Open Educational Resources in Science Education

ERIC Educational Resources Information Center

Ye, Lei; Recker, Mimi; Walker, Andrew; Leary, Heather; Yuan, Min

2015-01-01

This article reports results from a scale-up study of the impact of a software tool designed to support teachers in the digital learning era. This tool, the Curriculum Customization Service (CCS), enables teachers to access open educational resources from multiple providers, customize them for classroom instruction, and share them with other…

Self-Regulated Learning Substudy: Systems Thinking and Curriculum Innovation (STACI) Project.

ERIC Educational Resources Information Center

Mandinach, Ellen B.

The Systems Thinking and Curriculum Innovation (STACI) Project is a multi-year research effort intended to examine the cognitive demands and consequences of learning from a systems thinking approach to instruction and from using simulation-modeling software. The purpose of the study is to test the potentials and effects of integrating the systems…

Agile Preparation within a Traditional Project Management Course

ERIC Educational Resources Information Center

Landry, Jeffrey P.; McDaniel, Rachel

2016-01-01

Agile software approaches have seen a steady rise over a decade and a half, but agile's place in the information systems (IS) undergraduate curriculum is far from settled. While agile concepts may arguably be taught in multiple places in the IS curriculum, this paper argues for its inclusion in a project management course. This paper builds on…

Project LITE: Light Inquiry Through Experiments

NASA Astrophysics Data System (ADS)

Brecher, Kenneth

2007-06-01

"Project LITE: Light Inquiry Through Experiments" is a science education project aimed at developing interactive hands-on and eyes-on curriculum, software and materials about light and optics. These are being developed for use in undergraduate astronomy courses, but they can also be used to advantage in physics, chemistry, Earth science and psychology courses throughout the K-12 and undergraduate curriculum.

Evaluating Educational Computer Games in Geography: What Is the Relationship to Curriculum Requirements?

ERIC Educational Resources Information Center

Brysch, Carmen P.; Huynh, Niem Tu; Scholz, Michael

2012-01-01

Computer games, whether accessed online or through commercial software, have learning potential in educational settings. However, alignment with national, state, or local curriculum requirements can create a barrier. The purpose of this study was to conduct a content analysis of selected games that could be used in a sixth grade geography or…

Integrating Enterprise Resource Planning (SAP) in the Accounting Curriculum: A Systematic Literature Review and Case Study

ERIC Educational Resources Information Center

Blount, Yvette; Abedin, Babak; Vatanasakdakul, Savanid; Erfani, Seyedezahra

2016-01-01

This study investigates how an enterprise resource planning (ERP) software package SAP was integrated into the curriculum of an accounting information systems (AIS) course in an Australian university. Furthermore, the paper provides a systematic literature review of articles published between 1990 and 2013 to understand how ERP systems were…

A Smart Curriculum for Middle-School Science Instruction: A Web-Based Curriculum Integrating Assessment and Instruction.

ERIC Educational Resources Information Center

1996

This paper discusses a model of integrated instruction and assessment called SMART (Special Multimedia Arenas for Refining Thinking). SMART involves interactive use of the Internet and multimedia software. The Internet serves three important functions: it acts as a formative assessment tool by providing individualized feedback to students, creates…

Infrared and Raman Spectroscopy: A Discovery-Based Activity for the General Chemistry Curriculum

ERIC Educational Resources Information Center

Borgsmiller, Karen L.; O'Connell, Dylan J.; Klauenberg, Kathryn M.; Wilson, Peter M.; Stromberg, Christopher J.

2012-01-01

A discovery-based method is described for incorporating the concepts of IR and Raman spectroscopy into the general chemistry curriculum. Students use three sets of springs to model the properties of single, double, and triple covalent bonds. Then, Gaussian 03W molecular modeling software is used to illustrate the relationship between bond…

Glossary of Software Engineering Laboratory terms

NASA Technical Reports Server (NTRS)

1983-01-01

A glossary of terms used in the Software Engineering Laboratory (SEL) is given. The terms are defined within the context of the software development environment for flight dynamics at the Goddard Space Flight Center. A concise reference for clarifying the language employed in SEL documents and data collection forms is given. Basic software engineering concepts are explained and standard definitions for use by SEL personnel are established.

Software Reporting Metrics. Revision 2.

DTIC Science & Technology

1985-11-01

MITRE Corporation and ESD. Some of the data has been obtained from Dr. Barry Boehm’s Software Engineering Economics (Ref. 1). Thanks are also given to...data level control management " SP = structured programming Barry W. Boehm, Software Engineering Economics, &©1981, p. 122. Reprinted by permission of...investigated and implemented in future prototypes. 43 REFERENCES For further reading: " 1. Boehm, Barry W. Software Engineering Economics; Englewood

Toward Reusable Graphics Components in Ada

DTIC Science & Technology

1993-03-01

Then alternatives for obtaining well- engineered reusable software components were examined. Finally, the alternatives were analyzed, and the most...reusable software components. Chapter 4 describes detailed design and implementation strategies in building a well- engineered reusable set of components in...study. 2.2 The Object-Oriented Paradigm 2.2.1 The Need for Object-Oriented Techniques. Among software engineers the software crisis is a well known

Object oriented development of engineering software using CLIPS

NASA Technical Reports Server (NTRS)

Yoon, C. John

1991-01-01

Engineering applications involve numeric complexity and manipulations of a large amount of data. Traditionally, numeric computation has been the concern in developing an engineering software. As engineering application software became larger and more complex, management of resources such as data, rather than the numeric complexity, has become the major software design problem. Object oriented design and implementation methodologies can improve the reliability, flexibility, and maintainability of the resulting software; however, some tasks are better solved with the traditional procedural paradigm. The C Language Integrated Production System (CLIPS), with deffunction and defgeneric constructs, supports the procedural paradigm. The natural blending of object oriented and procedural paradigms has been cited as the reason for the popularity of the C++ language. The CLIPS Object Oriented Language's (COOL) object oriented features are more versatile than C++'s. A software design methodology based on object oriented and procedural approaches appropriate for engineering software, and to be implemented in CLIPS was outlined. A method for sensor placement for Space Station Freedom is being implemented in COOL as a sample problem.

Software requirements specification for the GIS-T/ISTEA pooled fund study phase C linear referencing engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amai, W.; Espinoza, J. Jr.; Fletcher, D.R.

1997-06-01

This Software Requirements Specification (SRS) describes the features to be provided by the software for the GIS-T/ISTEA Pooled Fund Study Phase C Linear Referencing Engine project. This document conforms to the recommendations of IEEE Standard 830-1984, IEEE Guide to Software Requirements Specification (Institute of Electrical and Electronics Engineers, Inc., 1984). The software specified in this SRS is a proof-of-concept implementation of the Linear Referencing Engine as described in the GIS-T/ISTEA pooled Fund Study Phase B Summary, specifically Sheet 13 of the Phase B object model. The software allows an operator to convert between two linear referencing methods and a datummore » network.« less

A Software Engineering Approach based on WebML and BPMN to the Mediation Scenario of the SWS Challenge

NASA Astrophysics Data System (ADS)

Brambilla, Marco; Ceri, Stefano; Valle, Emanuele Della; Facca, Federico M.; Tziviskou, Christina

Although Semantic Web Services are expected to produce a revolution in the development of Web-based systems, very few enterprise-wide design experiences are available; one of the main reasons is the lack of sound Software Engineering methods and tools for the deployment of Semantic Web applications. In this chapter, we present an approach to software development for the Semantic Web based on classical Software Engineering methods (i.e., formal business process development, computer-aided and component-based software design, and automatic code generation) and on semantic methods and tools (i.e., ontology engineering, semantic service annotation and discovery).

Software Engineering Laboratory (SEL) data base reporting software user's guide and system description. Volume 1: Introduction and user's guide

NASA Technical Reports Server (NTRS)

1983-01-01

Reporting software programs provide formatted listings and summary reports of the Software Engineering Laboratory (SEL) data base contents. The operating procedures and system information for 18 different reporting software programs are described. Sample output reports from each program are provided.

Software Engineering Laboratory (SEL) data base reporting software user's guide and system description. Volume 2: Program descriptions

NASA Technical Reports Server (NTRS)

1983-01-01

The structure and functions of each reporting software program for the Software Engineering Laboratory data base are described. Baseline diagrams, module descriptions, and listings of program generation files are included.

Software engineering standards and practices

NASA Technical Reports Server (NTRS)

Durachka, R. W.

1981-01-01

Guidelines are presented for the preparation of a software development plan. The various phases of a software development project are discussed throughout its life cycle including a general description of the software engineering standards and practices to be followed during each phase.

A study of female students enrollment in engineering technology stem programs

NASA Astrophysics Data System (ADS)

Habib, Ihab S.

The problem studied in this research project was the enrollment of female STEM Engineering Technology students and the impact of professional mentoring and financial incentives on their enrollment, retention, and completion of engineering curriculum. Several tasks were presented in researchers' professional position; to recruit more students to the program, especially female as a minority in the Engineering Technology Department, make appropriate changes to the curriculum, and make improvements in mentoring students to improve rates of enrollment, retention, and completion of the program. A survey was created to study the effects of Science Engineering Technology and Mathematics for Engineering Technology (STEM ENGT) students' perceptions, mentorship, and scholarships availability, enrollment, retention, and program completion by enrolled student gender. Other studies have discovered that more scholarship and faculty mentorship support provided for female students resulted in improved diversity within engineering curricula student bodies (Sorcinelli, 2007).

Geometry + Technology = Proof

ERIC Educational Resources Information Center

Lyublinskaya, Irina; Funsch, Dan

2012-01-01

Several interactive geometry software packages are available today to secondary school teachers. An example is The Geometer's Sketchpad[R] (GSP), also known as Dynamic Geometry[R] software, developed by Key Curriculum Press. This numeric based technology has been widely adopted in the last twenty years, and a vast amount of creativity has been…

Public Domain Software for Education.

ERIC Educational Resources Information Center

Scholastech, Inc., Cambridge, MA.

This report describes a project undertaken by Scholastech, a public charity addressing the development needs of computing educators, which was designed to advocate and support the increased use of free software in the college curriculum. The first of five sections provides a brief overview and statement of project objectives, i.e., to serve…

Cognitive Tutor[R] Algebra I. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2009

2009-01-01

The "Cognitive Tutor[R] Algebra I" curriculum, published by Carnegie Learning, is an approach that combines algebra textbooks with interactive software. The software is developed around an artificial intelligence model that identifies strengths and weaknesses in each individual student's mastery of mathematical concepts. It then customizes prompts…

Integrating Multimedia into the Curriculum: A Case Study Evaluation.

ERIC Educational Resources Information Center

Felix, Uschi

1997-01-01

Evaluates software developed for advanced learners of a second language. The software uses the target language (German) exclusively, brings together language and literature teaching, and includes a large variety of written exercises with scored feedback. Findings reveal that students are enthusiastic about using this multimedia program and…

PLATO[R] Achieve Now. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2010

2010-01-01

"PLATO[R] Achieve Now" is a software-based curriculum for the elementary and middle school grades. Instructional content is delivered via the PlayStation Portable (PSP[R]) system, allowing students to access learning materials in various settings. Software-based assessments are used to customize individual instruction, allowing students…

Security Code Red or Ready? Leaders Sharing--For Tech Leaders

ERIC Educational Resources Information Center

Hall, Don; Kelly, Pat

2005-01-01

Increasingly, teachers rely on computer software and networks to both enhance curriculum management and provide engaging learning opportunities in instruction. New software is enabling more frequent formative assessments to better focus day-to-day lessons on the unique needs of individual learners. Administrators use increasingly complex data…

Presentation Software and the Single Computer.

ERIC Educational Resources Information Center

Brown, Cindy A.

1998-01-01

Shows how the "Kid Pix" software and a single multimedia computer can aid classroom instruction for kindergarten through second grade. Topics include using the computer as a learning center for small groups of students; making a "Kid Pix" slide show; using it as an electronic chalkboard; and creating curriculum-related…

Standardized Curriculum for Diesel Engine Mechanics.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: diesel engine mechanics I and II. The eight units in diesel engine mechanics I are as follows: orientation; shop safety; basic shop tools; fasteners; measurement; engine operating principles; engine components; and basic auxiliary…

Socio-Cultural Challenges in Global Software Engineering Education

ERIC Educational Resources Information Center

Hoda, Rashina; Babar, Muhammad Ali; Shastri, Yogeshwar; Yaqoob, Humaa

2017-01-01

Global software engineering education (GSEE) is aimed at providing software engineering (SE) students with knowledge, skills, and understanding of working in globally distributed arrangements so they can be prepared for the global SE (GSE) paradigm. It is important to understand the challenges involved in GSEE for improving the quality and…

An Engineering Context for Software Engineering

DTIC Science & Technology

2008-09-01

medium in which I can plant the ideas from this dissertation. I have also written a book on requirements development that is used at NPS by myself and...Addison-Wesley, Anniversary ed., 1995. [Bry00] Bryant, A., “Metaphor, Myth, and Mimicry : The Bases of Software Engineering,” Annals of Software

Proceedings of the Twenty-Fourth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

2000-01-01

On December 1 and 2, the Software Engineering Laboratory (SEL), a consortium composed of NASA/Goddard, the University of Maryland, and CSC, held the 24th Software Engineering Workshop (SEW), the last of the millennium. Approximately 240 people attended the 2-day workshop. Day 1 was composed of four sessions: International Influence of the Software Engineering Laboratory; Object Oriented Testing and Reading; Software Process Improvement; and Space Software. For the first session, three internationally known software process experts discussed the influence of the SEL with respect to software engineering research. In the Space Software session, prominent representatives from three different NASA sites- GSFC's Marti Szczur, the Jet Propulsion Laboratory's Rick Doyle, and the Ames Research Center IV&V Facility's Lou Blazy- discussed the future of space software in their respective centers. At the end of the first day, the SEW sponsored a reception at the GSFC Visitors' Center. Day 2 also provided four sessions: Using the Experience Factory; A panel discussion entitled "Software Past, Present, and Future: Views from Government, Industry, and Academia"; Inspections; and COTS. The day started with an excellent talk by CSC's Frank McGarry on "Attaining Level 5 in CMM Process Maturity." Session 2, the panel discussion on software, featured NASA Chief Information Officer Lee Holcomb (Government), our own Jerry Page (Industry), and Mike Evangelist of the National Science Foundation (Academia). Each presented his perspective on the most important developments in software in the past 10 years, in the present, and in the future.

Promoting Active Learning When Teaching Introductory Statistics and Probability Using a Portfolio Curriculum Approach

ERIC Educational Resources Information Center

Adair, Desmond; Jaeger, Martin; Price, Owen M.

2018-01-01

The use of a portfolio curriculum approach, when teaching a university introductory statistics and probability course to engineering students, is developed and evaluated. The portfolio curriculum approach, so called, as the students need to keep extensive records both as hard copies and digitally of reading materials, interactions with faculty,…

"Gaa-Noodin-Oke" (Alternative Energy/Wind Power): A Curriculum Implementation on the White Earth Reservation

ERIC Educational Resources Information Center

Guzey, Siddika Selcen; Nyachwaya, James; Moore, Tamara J.; Roehrig, Gillian H.

2014-01-01

A wind energy focused curriculum for grades 4-8 was designed and implemented to promote the understanding of wind energy concepts with American Indian students. 57 students who participated in the 2009 summer program of the "Reach for the Sky" (RFTS) Science, Technology, Engineering, and Mathematics (STEM) received the curriculum. The…

Proceedings of the Ninth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1984-01-01

Experiences in measurement, utilization, and evaluation of software methodologies, models, and tools are discussed. NASA's involvement in ever larger and more complex systems, like the space station project, provides a motive for the support of software engineering research and the exchange of ideas in such forums. The topics of current SEL research are software error studies, experiments with software development, and software tools.

FMT (Flight Software Memory Tracker) For Cassini Spacecraft-Software Engineering Using JAVA

NASA Technical Reports Server (NTRS)

Kan, Edwin P.; Uffelman, Hal; Wax, Allan H.

1997-01-01

The software engineering design of the Flight Software Memory Tracker (FMT) Tool is discussed in this paper. FMT is a ground analysis software set, consisting of utilities and procedures, designed to track the flight software, i.e., images of memory load and updatable parameters of the computers on-board Cassini spacecraft. FMT is implemented in Java.

Reformulating General Engineering and Biological Systems Engineering Programs at Virginia Tech

ERIC Educational Resources Information Center

Lohani, Vinod K.; Wolfe, Mary Leigh; Wildman, Terry; Mallikarjunan, Kumar; Connor, Jeffrey

2011-01-01

In 2004, a group of engineering and education faculty at Virginia Tech received a major curriculum reform and engineering education research grant under the department-level reform (DLR) program of the NSF. This DLR project laid the foundation of sponsored research in engineering education in the Department of Engineering Education. The DLR…

Do Undergraduate Engineering Faculty Include Occupational and Public Health and Safety in the Engineering Curriculum?

ERIC Educational Resources Information Center

Farwell, Dianna; And Others

1995-01-01

The purpose of this study was to determine whether and, if so, why engineering faculty include occupational and public health and safety in their undergraduate engineering courses. Data were collected from 157 undergraduate engineering faculty from 65 colleges of engineering in the United States. (LZ)

Requirements: Towards an understanding on why software projects fail

NASA Astrophysics Data System (ADS)

Hussain, Azham; Mkpojiogu, Emmanuel O. C.

2016-08-01

Requirement engineering is at the foundation of every successful software project. There are many reasons for software project failures; however, poorly engineered requirements process contributes immensely to the reason why software projects fail. Software project failure is usually costly and risky and could also be life threatening. Projects that undermine requirements engineering suffer or are likely to suffer from failures, challenges and other attending risks. The cost of project failures and overruns when estimated is very huge. Furthermore, software project failures or overruns pose a challenge in today's competitive market environment. It affects the company's image, goodwill, and revenue drive and decreases the perceived satisfaction of customers and clients. In this paper, requirements engineering was discussed. Its role in software projects success was elaborated. The place of software requirements process in relation to software project failure was explored and examined. Also, project success and failure factors were also discussed with emphasis placed on requirements factors as they play a major role in software projects' challenges, successes and failures. The paper relied on secondary data and empirical statistics to explore and examine factors responsible for the successes, challenges and failures of software projects in large, medium and small scaled software companies.

Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1 : ASC software quality engineering practices version 1.0.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Minana, Molly A.; Sturtevant, Judith E.; Heaphy, Robert

2005-01-01

The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in DOE/AL Quality Criteria (QC-1) as conformance to customer requirements and expectations. This quality plan defines the ASC program software quality practices and provides mappings of these practices to the SNL Corporate Process Requirements (CPR 1.3.2 and CPR 1.3.6) and the Department of Energy (DOE) document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines (GP&G). This quality plan identifies ASC management andmore » software project teams' responsibilities for cost-effective software engineering quality practices. The SNL ASC Software Quality Plan establishes the signatories commitment to improving software products by applying cost-effective software engineering quality practices. This document explains the project teams opportunities for tailoring and implementing the practices; enumerates the practices that compose the development of SNL ASC's software products; and includes a sample assessment checklist that was developed based upon the practices in this document.« less

Capacity-oriented curriculum system of optoelectronics in the context of large category cultivation

NASA Astrophysics Data System (ADS)

Luo, Yuan; Hu, Zhangfang; Zhang, Yi

2017-08-01

In order to cultivate the innovative talents with the comprehensive development to meet the talents demand for development of economic society, Chongqing University of Posts and Telecommunications implements cultivation based on broadening basic education and enrolment in large category of general education. Optoelectronic information science and engineering major belongs to the electronic engineering category. The "2 +2" mode is utilized for personnel training, where students are without major in the first and second year and assigned to a major within the major categories in the end of the second year. In the context of the comprehensive cultivation, for the changes in the demand for professionals in the global competitive environment with the currently rapid development, especially the demand for the professional engineering technology personnel suitable to industry and development of local economic society, the concept of CDIO engineering ability cultivation is used for reference. Thus the curriculum system for the three-node structure optoelectronic information science and engineering major is proposed, which attaches great importance to engineering practice and innovation cultivation under the background of the comprehensive cultivation. The conformity between the curriculum system and the personnel training objectives is guaranteed effectively, and the consistency between the teaching philosophy and the teaching behavior is enhanced. Therefore, the idea of major construction is clear with specific characteristics.

Proceedings of the 14th Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1989-01-01

Several software related topics are presented. Topics covered include studies and experiment at the Software Engineering Laboratory at the Goddard Space Flight Center, predicting project success from the Software Project Management Process, software environments, testing in a reuse environment, domain directed reuse, and classification tree analysis using the Amadeus measurement and empirical analysis.

Software Process Improvement through the Removal of Project-Level Knowledge Flow Obstacles: The Perceptions of Software Engineers

ERIC Educational Resources Information Center

Mitchell, Susan Marie

2012-01-01

Uncontrollable costs, schedule overruns, and poor end product quality continue to plague the software engineering field. Innovations formulated with the expectation to minimize or eliminate cost, schedule, and quality problems have generally fallen into one of three categories: programming paradigms, software tools, and software process…

RICIS Software Engineering 90 Symposium: Aerospace Applications and Research Directions Proceedings Appendices

NASA Technical Reports Server (NTRS)

1990-01-01

Papers presented at RICIS Software Engineering Symposium are compiled. The following subject areas are covered: flight critical software; management of real-time Ada; software reuse; megaprogramming software; Ada net; POSIX and Ada integration in the Space Station Freedom Program; and assessment of formal methods for trustworthy computer systems.

Small Engine Repair. Two-Stroke and Four-Stroke Cycle.

ERIC Educational Resources Information Center

Hires, Bill; And Others

This curriculum guide is intended to assist persons teaching a course in repairing two- and four-stroke cycle small engines. Addressed in the individual units of instruction are the following topics: safety, tools, fasteners, and measurement techniques; basic small engine theory (engine identification and inspection, basic engine principles and…

Engineering Design Skills Coverage in K-12 Engineering Program Curriculum Materials in the USA

ERIC Educational Resources Information Center

Chabalengula, Vivien M.; Mumba, Frackson

2017-01-01

The current "K-12 Science Education framework" and "Next Generation Science Standards" (NGSS) in the United States emphasise the integration of engineering design in science instruction to promote scientific literacy and engineering design skills among students. As such, many engineering education programmes have developed…

Developing an Engineering Identity in Early Childhood

ERIC Educational Resources Information Center

Pantoya, Michelle L.; Aguirre-Munoz, Zenaida; Hunt, Emily M.

2015-01-01

This project describes a strategy to introduce young children to engineering in a way that develops their engineering identity. The targeted age group is 3-7 year old students because they rarely experience purposeful engineering instruction. The curriculum was designed around an engineering storybook and included interactive academic discussions…

Technology transfer in software engineering

NASA Technical Reports Server (NTRS)

Bishop, Peter C.

1989-01-01

The University of Houston-Clear Lake is the prime contractor for the AdaNET Research Project under the direction of NASA Johnson Space Center. AdaNET was established to promote the principles of software engineering to the software development industry. AdaNET will contain not only environments and tools, but also concepts, principles, models, standards, guidelines and practices. Initially, AdaNET will serve clients from the U.S. government and private industry who are working in software development. It will seek new clients from those who have not yet adopted the principles and practices of software engineering. Some of the goals of AdaNET are to become known as an objective, authoritative source of new software engineering information and parts, to provide easy access to information and parts, and to keep abreast of innovations in the field.

Effective Software Engineering Leadership for Development Programs

ERIC Educational Resources Information Center

Cagle West, Marsha

2010-01-01

Software is a critical component of systems ranging from simple consumer appliances to complex health, nuclear, and flight control systems. The development of quality, reliable, and effective software solutions requires the incorporation of effective software engineering processes and leadership. Processes, approaches, and methodologies for…

Development of a comprehensive software engineering environment

NASA Technical Reports Server (NTRS)

Hartrum, Thomas C.; Lamont, Gary B.

1987-01-01

The generation of a set of tools for software lifecycle is a recurring theme in the software engineering literature. The development of such tools and their integration into a software development environment is a difficult task because of the magnitude (number of variables) and the complexity (combinatorics) of the software lifecycle process. An initial development of a global approach was initiated in 1982 as the Software Development Workbench (SDW). Continuing efforts focus on tool development, tool integration, human interfacing, data dictionaries, and testing algorithms. Current efforts are emphasizing natural language interfaces, expert system software development associates and distributed environments with Ada as the target language. The current implementation of the SDW is on a VAX-11/780. Other software development tools are being networked through engineering workstations.

Software reengineering

NASA Technical Reports Server (NTRS)

Fridge, Ernest M., III

1991-01-01

Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. JSC created a significant set of tools to develop and maintain FORTRAN and C code during development of the Space Shuttle. This tool set forms the basis for an integrated environment to re-engineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. A beta vision of the environment was released in Mar. 1991. The commercial potential for such re-engineering tools is very great. CASE TRENDS magazine reported it to be the primary concern of over four hundred of the top MIS executives.

A Recommended Framework for the Network-Centric Acquisition Process

DTIC Science & Technology

2009-09-01

ISO /IEC 12207 , Systems and Software Engineering-Software Life-Cycle Processes  ANSI/EIA 632, Processes for Engineering a System. There are...engineering [46]. Some of the process models presented in the DAG are:  ISO /IEC 15288, Systems and Software Engineering-System Life-Cycle Processes...e.g., ISO , IA, Security, etc.). Vetting developers helps ensure that they are using industry best industry practices and maximize the IA compliance

The Impact of Software on Associate Degree Programs in Electronic Engineering Technology.

ERIC Educational Resources Information Center

Hata, David M.

1986-01-01

Assesses the range and extent of computer assisted instruction software available in electronic engineering technology education. Examines the need for software skills in four areas: (1) high-level languages; (2) assembly language; (3) computer-aided engineering; and (4) computer-aided instruction. Outlines strategies for the future in three…

Software engineering

NASA Technical Reports Server (NTRS)

Fridge, Ernest M., III; Hiott, Jim; Golej, Jim; Plumb, Allan

1993-01-01

Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. The Johnson Space Center (JSC) created a significant set of tools to develop and maintain FORTRAN and C code during development of the space shuttle. This tool set forms the basis for an integrated environment to reengineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. The latest release of the environment was in Feb. 1992.

Placing Geography in the Curriculum: Ideas from the Western PLACE Conference (Boulder, Colorado, August 9-11, 1987).

ERIC Educational Resources Information Center

Hill, David A., Ed.

Primarily a collection of lesson plans covering various topics in geography, this document is divided into seven sections. The first section includes three short papers on geography and its place in the curriculum. The second section deals with teaching map skills, evaluating computer software to be used in teaching geography, and ideas for field…

Implementing Project Based Survey Research Skills to Grade Six ELP Students with "The Survey Toolkit" and "TinkerPlots"[R

ERIC Educational Resources Information Center

Walsh, Thomas, Jr.

2011-01-01

"Survey Toolkit Collecting Information, Analyzing Data and Writing Reports" (Walsh, 2009a) is discussed as a survey research curriculum used by the author's sixth grade students. The report describes the implementation of "The Survey Toolkit" curriculum and "TinkerPlots"[R] software to provide instruction to students learning a project based…

The Impact of Assistive Technology on Curriculum Accommodation for a Braille-Reading Student

ERIC Educational Resources Information Center

Farnsworth, Charles R.; Luckner, John L.

2008-01-01

Over 5 months, the authors evaluated the efficacy of electronic assistive technology (the BrailleNote mPower BT-32 notetaker and Tiger Cub Jr. embosser) and associated software components in creating curriculum materials for a middle school Braille-reading student. The authors collected data at the beginning and end of the study from parents,…

The Personal Software Process (PSPSM): An Empirical Study of the Impact of PSP on Individual Engineers.

DTIC Science & Technology

1997-12-01

Watts Humphrey and is described in his book A Discipline for Software Engineering [ Humphrey 95]. Its intended use is to guide the planning and...Pat; Humphrey , Watts S .; Khajenoori, Soheil; Macke, Susan; & Matvya, Annette. "Introducing the Personal Software Process: Three Industry Case... Humphrey 95] Humphrey , Watts S . A Discipline for Software Engineering. Reading, Ma.: Addison-Wesley, 1995. [Mauchly 40] Mauchly, J.W. "Significance

48 CFR 227.7206 - Contracts for architect-engineer services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Rights in Computer Software and Computer Software Documentation 227.7206 Contracts for architect-engineer services. Follow 227.7107 when contracting for architect-engineer services. ...-engineer services. 227.7206 Section 227.7206 Federal Acquisition Regulations System DEFENSE ACQUISITION...

48 CFR 227.7206 - Contracts for architect-engineer services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Rights in Computer Software and Computer Software Documentation 227.7206 Contracts for architect-engineer services. Follow 227.7107 when contracting for architect-engineer services. ...-engineer services. 227.7206 Section 227.7206 Federal Acquisition Regulations System DEFENSE ACQUISITION...

48 CFR 227.7206 - Contracts for architect-engineer services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Rights in Computer Software and Computer Software Documentation 227.7206 Contracts for architect-engineer services. Follow 227.7107 when contracting for architect-engineer services. ...-engineer services. 227.7206 Section 227.7206 Federal Acquisition Regulations System DEFENSE ACQUISITION...

48 CFR 227.7206 - Contracts for architect-engineer services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Rights in Computer Software and Computer Software Documentation 227.7206 Contracts for architect-engineer services. Follow 227.7107 when contracting for architect-engineer services. ...-engineer services. 227.7206 Section 227.7206 Federal Acquisition Regulations System DEFENSE ACQUISITION...

48 CFR 227.7206 - Contracts for architect-engineer services.

Code of Federal Regulations, 2010 CFR

2010-10-01

...-engineer services. 227.7206 Section 227.7206 Federal Acquisition Regulations System DEFENSE ACQUISITION... Rights in Computer Software and Computer Software Documentation 227.7206 Contracts for architect-engineer services. Follow 227.7107 when contracting for architect-engineer services. ...

A Novel Coupling Pattern in Computational Science and Engineering Software

EPA Science Inventory

Computational science and engineering (CSE) software is written by experts of certain area(s). Due to the specialization, existing CSE software may need to integrate other CSE software systems developed by different groups of experts. The coupling problem is one of the challenges...

A Novel Coupling Pattern in Computational Science and Engineering Software

EPA Science Inventory

Computational science and engineering (CSE) software is written by experts of certain area(s). Due to the specialization,existing CSE software may need to integrate other CSE software systems developed by different groups of experts. Thecoupling problem is one of the challenges f...

Modeling a distributed environment for a petroleum reservoir engineering application with software product line

NASA Astrophysics Data System (ADS)

de Faria Scheidt, Rafael; Vilain, Patrícia; Dantas, M. A. R.

2014-10-01

Petroleum reservoir engineering is a complex and interesting field that requires large amount of computational facilities to achieve successful results. Usually, software environments for this field are developed without taking care out of possible interactions and extensibilities required by reservoir engineers. In this paper, we present a research work which it is characterized by the design and implementation based on a software product line model for a real distributed reservoir engineering environment. Experimental results indicate successfully the utilization of this approach for the design of distributed software architecture. In addition, all components from the proposal provided greater visibility of the organization and processes for the reservoir engineers.

Software IV and V Research Priorities and Applied Program Accomplishments Within NASA

NASA Technical Reports Server (NTRS)

Blazy, Louis J.

2000-01-01

The mission of this research is to be world-class creators and facilitators of innovative, intelligent, high performance, reliable information technologies that enable NASA missions to (1) increase software safety and quality through error avoidance, early detection and resolution of errors, by utilizing and applying empirically based software engineering best practices; (2) ensure customer software risks are identified and/or that requirements are met and/or exceeded; (3) research, develop, apply, verify, and publish software technologies for competitive advantage and the advancement of science; and (4) facilitate the transfer of science and engineering data, methods, and practices to NASA, educational institutions, state agencies, and commercial organizations. The goals are to become a national Center Of Excellence (COE) in software and system independent verification and validation, and to become an international leading force in the field of software engineering for improving the safety, quality, reliability, and cost performance of software systems. This project addresses the following problems: Ensure safety of NASA missions, ensure requirements are met, minimize programmatic and technological risks of software development and operations, improve software quality, reduce costs and time to delivery, and improve the science of software engineering

Implementing large projects in software engineering courses

NASA Astrophysics Data System (ADS)

Coppit, David

2006-03-01

In software engineering education, large projects are widely recognized as a useful way of exposing students to the real-world difficulties of team software development. But large projects are difficult to put into practice. First, educators rarely have additional time to manage software projects. Second, classrooms have inherent limitations that threaten the realism of large projects. Third, quantitative evaluation of individuals who work in groups is notoriously difficult. As a result, many software engineering courses compromise the project experience by reducing the team sizes, project scope, and risk. In this paper, we present an approach to teaching a one-semester software engineering course in which 20 to 30 students work together to construct a moderately sized (15KLOC) software system. The approach combines carefully coordinated lectures and homeworks, a hierarchical project management structure, modern communication technologies, and a web-based project tracking and individual assessment system. Our approach provides a more realistic project experience for the students, without incurring significant additional overhead for the instructor. We present our experiences using the approach the last 2 years for the software engineering course at The College of William and Mary. Although the approach has some weaknesses, we believe that they are strongly outweighed by the pedagogical benefits.

RFID-Based Multidisciplinary Educational Platform to Improve the Engineering and Technology Curriculums

ERIC Educational Resources Information Center

Yelamarthi, Kumar

2012-01-01

Multidisciplinary projects involving electrical engineering (EE), mechanical engineering (ME), and computer engineering (CE) students are both exciting and difficult to conceptualize. Answering this challenge, this paper presents a multidisciplinary educational platform on radio frequency identification-based assistive devices. The combination of…

Educating Civil Engineers for Developing Countries

ERIC Educational Resources Information Center

Stanley, D.

1974-01-01

Based on engineering teaching experience in Africa and Asia, ideas are presented on educating civil engineers for developing countries, especially those in Africa. Some of the problems facing educational planners, teachers, and students are addressed, including responsibilities of a newly graduated civil engineer, curriculum development, and…

Professional Skills in the Engineering Curriculum

ERIC Educational Resources Information Center

Mohan, Ashwin; Merle, Dominike; Jackson, Christa; Lannin, John; Nair, Satish S.

2010-01-01

Faculty from the Department of Electrical and Computer Engineering and the College of Education at the University of Missouri (MU), Columbia, developed a novel course for engineering graduate students emphasizing pedagogy and professional skills. The two-semester course sequence, titled "Preparing Engineering Faculty and Professionals,"…

A Role-Playing Game for a Software Engineering Lab: Developing a Product Line

ERIC Educational Resources Information Center

Zuppiroli, Sara; Ciancarini, Paolo; Gabbrielli, Maurizio

2012-01-01

Software product line development refers to software engineering practices and techniques for creating families of similar software systems from a basic set of reusable components, called shared assets. Teaching how to deal with software product lines in a university lab course is a challenging task, because there are several practical issues that…

On the Prospects and Concerns of Integrating Open Source Software Environment in Software Engineering Education

ERIC Educational Resources Information Center

Kamthan, Pankaj

2007-01-01

Open Source Software (OSS) has introduced a new dimension in software community. As the development and use of OSS becomes prominent, the question of its integration in education arises. In this paper, the following practices fundamental to projects and processes in software engineering are examined from an OSS perspective: project management;…

Ten recommendations for software engineering in research.

PubMed

Hastings, Janna; Haug, Kenneth; Steinbeck, Christoph

2014-01-01

Research in the context of data-driven science requires a backbone of well-written software, but scientific researchers are typically not trained at length in software engineering, the principles for creating better software products. To address this gap, in particular for young researchers new to programming, we give ten recommendations to ensure the usability, sustainability and practicality of research software.

Model Driven Engineering

NASA Astrophysics Data System (ADS)

Gaševic, Dragan; Djuric, Dragan; Devedžic, Vladan

A relevant initiative from the software engineering community called Model Driven Engineering (MDE) is being developed in parallel with the Semantic Web (Mellor et al. 2003a). The MDE approach to software development suggests that one should first develop a model of the system under study, which is then transformed into the real thing (i.e., an executable software entity). The most important research initiative in this area is the Model Driven Architecture (MDA), which is Model Driven Architecture being developed under the umbrella of the Object Management Group (OMG). This chapter describes the basic concepts of this software engineering effort.

Ethics Across the Curriculum: Prospects for Broader (and Deeper) Teaching and Learning in Research and Engineering Ethics.

PubMed

Mitcham, Carl; Englehardt, Elaine E

2016-08-22

The movements to teach the responsible conduct of research (RCR) and engineering ethics at technological universities are often unacknowledged aspects of the ethics across the curriculum (EAC) movement and could benefit from explicit alliances with it. Remarkably, however, not nearly as much scholarly attention has been devoted to EAC as to RCR or to engineering ethics, and RCR and engineering ethics educational efforts are not always presented as facets of EAC. The emergence of EAC efforts at two different institutions-the Illinois Institute of Technology and Utah Valley University (UVU)-provide counter examples. The remarkably successful UVU initiative gave birth to EAC as a scholarly movement and to the associated Society for Ethics Across the Curriculum. EAC initiatives at the Colorado School of Mines, however, point up continuing institutional resistances to EAC. Finally, comparative reflection on successes and failures can draw some lessons for the future. One suggestion is that increasing demands for accountability and pedagogical research into what works in teaching and learning offers special opportunities.

Social, Economic, and Political Change: Portents for Reform in Engineering Curricula.

ERIC Educational Resources Information Center

Wenk, Edward, Jr.

1988-01-01

Discusses the needs and properties of human systems including issues of safety and the holistic approach in engineering. Lists a suggested introductory engineering curriculum. Describes characteristics of future realities in managing technology. (YP)

Architecture independent environment for developing engineering software on MIMD computers

NASA Technical Reports Server (NTRS)

Valimohamed, Karim A.; Lopez, L. A.

1990-01-01

Engineers are constantly faced with solving problems of increasing complexity and detail. Multiple Instruction stream Multiple Data stream (MIMD) computers have been developed to overcome the performance limitations of serial computers. The hardware architectures of MIMD computers vary considerably and are much more sophisticated than serial computers. Developing large scale software for a variety of MIMD computers is difficult and expensive. There is a need to provide tools that facilitate programming these machines. First, the issues that must be considered to develop those tools are examined. The two main areas of concern were architecture independence and data management. Architecture independent software facilitates software portability and improves the longevity and utility of the software product. It provides some form of insurance for the investment of time and effort that goes into developing the software. The management of data is a crucial aspect of solving large engineering problems. It must be considered in light of the new hardware organizations that are available. Second, the functional design and implementation of a software environment that facilitates developing architecture independent software for large engineering applications are described. The topics of discussion include: a description of the model that supports the development of architecture independent software; identifying and exploiting concurrency within the application program; data coherence; engineering data base and memory management.

NASA Software Documentation Standard

NASA Technical Reports Server (NTRS)

1991-01-01

The NASA Software Documentation Standard (hereinafter referred to as "Standard") is designed to support the documentation of all software developed for NASA; its goal is to provide a framework and model for recording the essential information needed throughout the development life cycle and maintenance of a software system. The NASA Software Documentation Standard can be applied to the documentation of all NASA software. The Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. The basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

Training, Quality Assurance Factors, and Tools Investigation: a Work Report and Suggestions on Software Quality Assurance

NASA Technical Reports Server (NTRS)

Lee, Pen-Nan

1991-01-01

Previously, several research tasks have been conducted, some observations were obtained, and several possible suggestions have been contemplated involving software quality assurance engineering at NASA Johnson. These research tasks are briefly described. Also, a brief discussion is given on the role of software quality assurance in software engineering along with some observations and suggestions. A brief discussion on a training program for software quality assurance engineers is provided. A list of assurance factors as well as quality factors are also included. Finally, a process model which can be used for searching and collecting software quality assurance tools is presented.

Asynchronous Education: A Blueprint for the Future of Adult Learning.

ERIC Educational Resources Information Center

Krueger, Lyle L.; Porter, Cyndi Wilson; Burke, Daniel

While the distance learning curriculum at Lakeland College (Wisconsin) began 20 years ago, the idea for Lakeland Online was conceived about two and one-half years ago. A variety of delivery modes were considered before discovering Convene software. Since the communication process enabled by the Convene software is asynchronous and requires only a…

Does ERP Hands-On Experience Help Students Learning Business Process Concepts?

ERIC Educational Resources Information Center

Rienzo, Thomas; Han, Bernard

2011-01-01

Over the past decade, more and more business schools are attempting to teach business processes (BPs) by using enterprise resource planning (ERP) software in their curricula. Currently, most studies involving ERP software in the academy have concentrated on learning and teaching via self-assessment surveys or curriculum integration. This research…

Are Academic Programs Adequate for the Software Profession?

ERIC Educational Resources Information Center

Koster, Alexis

2010-01-01

According to the Bureau of Labor Statistics, close to 1.8 million people, or 77% of all computer professionals, were working in the design, development, deployment, maintenance, and management of software in 2006. The ACM [Association for Computing Machinery] model curriculum for the BS in computer science proposes that about 42% of the core body…

Simulations and the Curriculum.

ERIC Educational Resources Information Center

Ediger, Marlow

Microcomputers can be used with simulation software to provide students both with experience in the "real world" of decision making and feedback on the decisions made. Such software allows individual students to choose the roles they wish to play from a menu of diverse roles and provides alternatives for them to consider for each decision to be…

Enterprise Systems (ES) Software in Business School Curriculum--Evaluation of Design and Delivery

ERIC Educational Resources Information Center

Seethamraju, Ravi

2007-01-01

Considering the increasing importance of enterprise systems in business, and their pedagogical value in demonstrating business process orientation and concepts of integration, several universities have incorporated popular enterprise system (ES) software products such as SAP R/3 into their business school curricula. This paper describes an attempt…

Overview of a Systematic Effort to Engineer and Monitor Curriculum Change: Emerging Guidelines and Encouraging Findings for Curriculum Installers.

ERIC Educational Resources Information Center

Mahan, James M.

This paper (1) describes 4-year efforts of the Eastern Regional Institute for Education (ERIE) to promote use of various process-oriented curricula in over 50 New York State and Pennsylvania school districts; and (2) presents guidelines for curriculum installers based on documented successes and failures in participating schools. (Author/LLR)

Mathematical Knowledge and Skills Expected by Higher Education in Engineering and the Social Sciences: Implications for High School Mathematics Curriculum

ERIC Educational Resources Information Center

Basaran, Mehmet; Özalp, Gülümser; Kalender, Ilker; Alacaci, Cengiz

2015-01-01

One important function of school mathematics curriculum is to prepare high school students with the knowledge and skills needed for university education. Identifying them empirically will help making sound decisions about the contents of high school mathematics curriculum. It will also help students to make informed choices in course selection at…

Mathematics as a Course of Study in Problem Solving: Then and Now.

ERIC Educational Resources Information Center

Ellis, Wade, Jr.

The mathematics curriculum in the first 2 years of college is a tool created to assist in solving problems. The current mathematics curriculum has changed little; the same topics, tied to the engineering and science curriculum, are taught as they were being taught in 1945. The problems that students need to solve have changed however. Both the…

EngineSim: Turbojet Engine Simulator Adapted for High School Classroom Use

NASA Technical Reports Server (NTRS)

Petersen, Ruth A.

2001-01-01

EngineSim is an interactive educational computer program that allows users to explore the effect of engine operation on total aircraft performance. The software is supported by a basic propulsion web site called the Beginner's Guide to Propulsion, which includes educator-created, web-based activities for the classroom use of EngineSim. In addition, educators can schedule videoconferencing workshops in which EngineSim's creator demonstrates the software and discusses its use in the educational setting. This software is a product of NASA Glenn Research Center's Learning Technologies Project, an educational outreach initiative within the High Performance Computing and Communications Program.

What do dental students think about mandatory laptop programs?

PubMed

Hendricson, William; Eisenberg, Elise; Guest, Gary; Jones, Pamela; Johnson, Lynn; Panagakos, Fotinos; McDonald, James; Cintron, Laura

2006-05-01

In spite of efforts by many dental schools to provide information technology resources for students, only a handful of studies have been conducted to determine what dental students think about these initiatives. There are no reports in the literature describing students' perceptions of mandatory laptop programs, which are now being implemented by at least 25 percent of North American dental schools. In schools that have implemented laptop programs, students are required either to enroll with their own laptops that meet specifications or to purchase a laptop from the school at matriculation. In some schools, students are also required to purchase curriculum support software that is bundled with the laptop. This study was conducted to determine students' opinions at U.S. dental schools with mandatory laptop programs about these aspects of this information technology initiative: frequency of use, perceived necessity of use, note-typing during lectures, effectiveness of training, influence on study habits, benefits, implementation problems, added value in relation to added tuition costs, impact on quality of dental education, overall rating of the laptop experience, and impact of the laptop on use of other electronic curriculum resources. Responses of students at schools that purchased packaged curriculum support software from a commercial vendor were compared with students' responses at schools where faculty provided their own educational software. Responses were also compared among freshmen, sophomores, and upperclassmen in a cross-sectional sample. In 2004, approximately 800 dental students at fourteen dental schools responded to eleven questions that requested their impressions and evaluation of mandatory laptop programs and associated educational software. These questions comprised one section of the IREC Students' Questionnaire (IREC=Institutional Readiness for Electronic Curriculum) that assessed students' perceptions of various aspects of information technology at their schools. The majority of students (63 percent) reported that the laptop and associated software were not essential for successful performance in their courses primarily because few instructors had modified their courses to take advantage of laptop capacities. Slightly more than half of the students reported their training was good or excellent, but felt that classroom-based "one size fits all" training was not effective. Less than 15 percent of the students reported that they had made substantial changes in their study habits as a consequence of the laptop program. The benefits perceived by students were primarily related to enhanced email communication with classmates and instructors and convenient access to the Internet and teachers' PowerPoint presentations. Implementation barriers included the inconvenience of carrying laptops to classes, lack of incentive to use the laptop and software because instructors did not require it, and poor quality software. Only 32 percent of students agreed that the value of the laptop and associated software was equal to the added tuition costs. Less than half of the students perceived that the laptop and software had improved the quality of their education, but more than 70 percent rated their overall experiences with laptops as "okay," "good," or "excellent." Freshmen expressed significantly more positive attitudes about the frequency of use, cost-effectiveness, educational value, and overall quality of laptops and bundled software than did upperclassmen. A significantly higher percentage of students at schools affiliated with a software vendor reported that laptops were essential in courses than students at schools with locally produced software, but students at vendor-supplied schools rated the cost-effectiveness significantly lower. Overall, students' assessment of mandatory laptop programs was mixed although freshmen provided significantly more positive responses than did upperclassmen. Incorporation of the e-curriculum into dental schools appears to be following a similar pattern as problem-based learning (PBL) in the 1980s and 1990s. Recommendations for enhancing future e-curricula are proposed based on lessons learned from both information technology and PBL implementation.

Evaluating software development characteristics: Assessment of software measures in the Software Engineering Laboratory. [reliability engineering

NASA Technical Reports Server (NTRS)

Basili, V. R.

1981-01-01

Work on metrics is discussed. Factors that affect software quality are reviewed. Metrics is discussed in terms of criteria achievements, reliability, and fault tolerance. Subjective and objective metrics are distinguished. Product/process and cost/quality metrics are characterized and discussed.