Visual search guidance is best after a short delay.

PubMed

Schmidt, Joseph; Zelinsky, Gregory J

2011-03-25

Search displays are typically presented immediately after a target cue, but in the real-world, delays often exist between target designation and search. Experiments 1 and 2 asked how search guidance changes with delay. Targets were cued using a picture or text label, each for 3000ms, followed by a delay up to 9000ms before the search display. Search stimuli were realistic objects, and guidance was quantified using multiple eye movement measures. Text-based cues showed a non-significant trend towards greater guidance following any delay relative to a no-delay condition. However, guidance from a pictorial cue increased sharply 300-600ms after preview offset. Experiment 3 replicated this guidance enhancement using shorter preview durations while equating the time from cue onset to search onset, demonstrating that the guidance benefit is linked to preview offset rather than a more complete encoding of the target. Experiment 4 showed that enhanced guidance persists even with a mask flashed at preview offset, suggesting an explanation other than visual priming. We interpret our findings as evidence for the rapid consolidation of target information into a guiding representation, which attains its maximum effectiveness shortly after preview offset. Copyright © 2011 Elsevier Ltd. All rights reserved.

Müller-Lyer figures influence the online reorganization of visually guided grasping movements.

PubMed

Heath, Matthew; Rival, Christina; Neely, Kristina; Krigolson, Olav

2006-03-01

In advance of grasping a visual object embedded within fins-in and fins-out Müller-Lyer (ML) configurations, participants formulated a premovement grip aperture (GA) based on the size of a neutral preview object. Preview objects were smaller, veridical, or larger than the size of the to-be-grasped target object. As a result, premovement GA associated with the small and large preview objects required significant online reorganization to appropriately grasp the target object. We reasoned that such a manipulation would provide an opportunity to examine the extent to which the visuomotor system engages egocentric and/or allocentric visual cues for the online, feedback-based control of action. It was found that the online reorganization of GA was reliably influenced by the ML figures (i.e., from 20 to 80% of movement time), regardless of the size of the preview object, albeit the small and large preview objects elicited more robust illusory effects than the veridical preview object. These results counter the view that online grasping control is mediated by absolute visual information computed with respect to the observer (e.g., Glover in Behav Brain Sci 27:3-78, 2004; Milner and Goodale in The visual brain in action 1995). Instead, the impact of the ML figures suggests a level of interaction between egocentric and allocentric visual cues in online action control.

Production of Previews and Advanced Data Products for the ESO Science Archive

NASA Astrophysics Data System (ADS)

Rité, C.; Slijkhuis, R.; Rosati, P.; Delmotte, N.; Rino, B.; Chéreau, F.; Malapert, J.-C.

2008-08-01

We present a project being carried out by the Virtual Observatory Systems Department/Advanced Data Products group in order to populate the ESO Science Archive Facility with image previews and advanced data products. The main goal is to provide users of the ESO Science Archive Facility with the possibility of viewing pre-processed images associated with instruments like WFI, ISAAC and SOFI before actually retrieving the data for full processing. The image processing is done by using the ESO/MVM image reduction software developed at ESO, to produce astrometrically calibrated FITS images, ranging from simple previews of single archive images, to fully stacked mosaics. These data products can be accessed via the ESO Science Archive Query Form and also be viewed with the browser VirGO {http://archive.eso.org/cms/virgo}.

Going to the Market. Teacher Edition. Fashion Buying Series.

ERIC Educational Resources Information Center

Collins, Cindy

This teacher's guide presents material for a unit on attending the retail fashion market. Content focuses on previewing merchandise for purchase, factors involved in a major market trip, common terms used when ordering merchandise, and pricing strategies. The guide contains 4 objectives, 6 group learning activities keyed to the objectives, 12…

Digital In, Digital Out: Digital Editing with Firewire.

ERIC Educational Resources Information Center

Doyle, Bob; Sauer, Jeff

1997-01-01

Reviews linear and nonlinear digital video (DV) editing equipment and software, using the IEEE 1394 (FireWire) connector. Includes a chart listing specifications and rating eight DV editing systems, reviews two DV still-photo cameras, and previews beta DV products. (PEN)

Electronic Portfolios. [SITE 2001 Section].

ERIC Educational Resources Information Center

Willis, Dee Anna, Ed.

This document contains the following papers on electronic portfolios from the SITE (Society for Information Technology & Teacher Education) 2001 conference: (1) "Portfolios: The Plan, the Purpose, a Preview" (Val Christensen and others); (2) "Electronic Portfolios (EP): A How To Guide" (Jerry P. Galloway); (3)…

Premier(e) Books.

ERIC Educational Resources Information Center

Searcher, 1999

1999-01-01

This month's previewed book is "Neal-Schuman Authoritative Guide To Evaluating Information on the Internet" by Alison Cooke. The excerpted chapter, "Evaluating Particular Types of Sources," looks at a variety of Internet sources, such as organizational World Wide Web sites, personal home pages, FTP archives, current awareness…

The CERT Guide to Coordinated Vulnerability Disclosure

DTIC Science & Technology

2017-08-11

Incident vs. Vulnerability Response 6 1.3 Why Coordinate Vulnerability Disclosures? 6 1.4 Previewing the Remainder of this Document 7 2 Principles of...Accidental Leaks 53 6.5 Independent Discovery 54 6.6 Active Exploitation 55 6.7 Relationships that Go Sideways 55 6.8 Hype, Marketing , and...guide provides an introduction to the key concepts, principles , and roles necessary to establish a successful CVD process. It also provides insights

Microdose acquisition in adolescent leg length discrepancy using a low-dose biplane imaging system.

PubMed

Jensen, Janni; Mussmann, Bo R; Hjarbæk, John; Al-Aubaidi, Zaid; Pedersen, Niels W; Gerke, Oke; Torfing, Trine

2017-09-01

Background Children with leg length discrepancy often undergo repeat imaging. Therefore, every effort to reduce radiation dose is important. Using low dose preview images and noise reduction software rather than diagnostic images for length measurements might contribute to reducing dose. Purpose To compare leg length measurements performed on diagnostic images and low dose preview images both acquired using a low-dose bi-planar imaging system. Material and Methods Preview and diagnostic images from 22 patients were retrospectively collected (14 girls, 8 boys; mean age, 12.8 years; age range, 10-15 years). All images were anonymized and measured independently by two musculoskeletal radiologists. Three sets of measurements were performed on all images; the mechanical axis lines of the femur and the tibia as well as the anatomical line of the entire extremity. Statistical significance was tested with a paired t-test. Results No statistically significant difference was found between measurements performed on the preview and on the diagnostic image. The mean tibial length difference between the observers was -0.06 cm (95% confidence interval [CI], -0.12 to 0.01) and -0.08 cm (95% CI, -0.21 to 0.05), respectively; 0.10 cm (95% CI, 0.02-0.17) and 0.06 cm (95% CI, -0.02 to 0.14) for the femoral measurements and 0.12 cm (95% CI, -0.05 to 0.26) and 0.08 cm (95% CI, -0.02 to 0.19) for total leg length discrepancy. ICCs were >0.99 indicating excellent inter- and intra-rater reliability. Conclusion The data strongly imply that leg length measurements performed on preview images from a low-dose bi-planar imaging system are comparable to measurements performed on diagnostic images.

I Use the Computer to ADVANCE Advances in Comprehension-Strategy Research.

ERIC Educational Resources Information Center

Blohm, Paul J.

Merging the instructional implications drawn from theory and research in the interactive reading model, schemata, and metacognition with computer based instruction seems a natural approach for actively involving students' participation in reading and learning from text. Computer based graphic organizers guide students' preview or review of lengthy…

Proctalgia fugax.

PubMed

Babb, Richard R

1996-04-01

Preview Severe, episodic pain in the rectum may prompt extensive- and expensive- diagnostic testing. If the cause is proctalgia fugax, such testing is unnecessary and wasteful. The author, a gastroenterologist, offers a guide to prompt recognition of the disorder based on patient history and suggests several therapeutic stategies that may help to relieve the pain.

Be Smart! Don't Start! Just Say No!

ERIC Educational Resources Information Center

Children's Television Workshop, New York, NY.

This magazine-style publication was developed to help children and young adolescents say "No" to alcohol. Profusely illustrated with color photographs and other graphics, the guide includes a preview of the Jets' new music video; a question-and-answer section about drinking and alcoholic beverages; a set of reasons for not drinking; and a section…

The look of LaTeX

NASA Astrophysics Data System (ADS)

This has always been the major objection to its use by those not driven by the need to typeset mathematics since the “what-you-see-is-what-you-get” (WYSIWYG) packages offered by Microsoft Word and WordPerfect are easy to learn and use. Recently, however, com-mercial software companies have begun to market almost-WYSIWYG programs that create LaTeX files. Some commercial software that creates LaTeX files are listed in Table 1. EXP and SWP have some of the “look and feel” of the software that is popular in offices and PCTeX32 allows quick and convenient previews of the translated LaTeX files.

Parafoveal preview benefit in sentence reading: Independent effects of plausibility and orthographic relatedness.

PubMed

Veldre, Aaron; Andrews, Sally

2017-04-01

Recent evidence from studies using the gaze-contingent boundary paradigm has suggested that parafoveal preview benefit is contingent on the fit between a preview word and the sentence context. We investigated whether this plausibility preview benefit is modulated by preview-target orthographic relatedness. Participants' eye movements were recorded as they read sentences in which the parafoveal preview of a target word was manipulated. The nonidentical previews were plausible or implausible continuations of the sentence and were either orthographic neighbors of the target or unrelated to the target. All first-pass reading measures showed strong plausibility preview benefits. There was also a benefit from preview-target orthographic relatedness across the reading measures. These two preview effects did not interact for any fixation measure. We also found no evidence that the relatedness effect was caused by misperception of an orthographically similar preview as the target word. These data highlight the existence of two independent mechanisms underlying preview effects: a benefit from the contextual fit of the preview word in the sentence, and a benefit from the sublexical overlap between the preview and target words.

How preview space/time translates into preview cost/benefit for fixation durations during reading.

PubMed

Kliegl, Reinhold; Hohenstein, Sven; Yan, Ming; McDonald, Scott A

2013-01-01

Eye-movement control during reading depends on foveal and parafoveal information. If the parafoveal preview of the next word is suppressed, reading is less efficient. A linear mixed model (LMM) reanalysis of McDonald (2006) confirmed his observation that preview benefit may be limited to parafoveal words that have been selected as the saccade target. Going beyond the original analyses, in the same LMM, we examined how the preview effect (i.e., the difference in single-fixation duration, SFD, between random-letter and identical preview) depends on the gaze duration on the pretarget word and on the amplitude of the saccade moving the eye onto the target word. There were two key results: (a) The shorter the saccade amplitude (i.e., the larger preview space), the shorter a subsequent SFD with an identical preview; this association was not observed with a random-letter preview. (b) However, the longer the gaze duration on the pretarget word, the longer the subsequent SFD on the target, with the difference between random-letter string and identical previews increasing with preview time. A third pattern-increasing cost of a random-letter string in the parafovea associated with shorter saccade amplitudes-was observed for target gaze durations. Thus, LMMs revealed that preview effects, which are typically summarized under "preview benefit", are a complex mixture of preview cost and preview benefit and vary with preview space and preview time. The consequence for reading is that parafoveal preview may not only facilitate, but also interfere with lexical access.

Semantic and Plausibility Preview Benefit Effects in English: Evidence from Eye Movements

ERIC Educational Resources Information Center

Schotter, Elizabeth R.; Jia, Annie

2016-01-01

Theories of preview benefit in reading hinge on integration across saccades and the idea that preview benefit is greater the more similar the preview and target are. Schotter (2013) reported preview benefit from a synonymous preview, but it is unclear whether this effect occurs because of similarity between the preview and target (i.e.,…

INSTRUCTIONAL TELEVISION FOR THE FIFTH GRADE. A TEACHER GUIDE, SEMESTER II.

ERIC Educational Resources Information Center

PELIKAN, ALFRED; AND OTHERS

INSTRUCTIONAL TELEVISION FOR FIFTH GRADE HAS BEEN DIVIDED INTO FIVE AREAS--ART, FOREIGN LANGUAGE, MUSIC, PHYSICAL EDUCATION, AND SCIENCE. A CALENDAR IS GIVEN TO CORRELATE DATES AND SUBJECT MATTER. A PREVIEW OF THE CONTENT OF EACH LESSON IS MADE AVAILABLE, AND FOLLOWUP ACTIVITIES ARE SUGGESTED TO REINFORCE THE LEARNING. THE STRUCTURE OF THE ART…

INSTRUCTIONAL TELEVISION FOR THE LOWER PRIMARY. A TEACHER GUIDE, SEMESTER II.

ERIC Educational Resources Information Center

PELIKAN, ALFRED; AND OTHERS

PROGRAMS FOR THE LOWER PRIMARY GROUP WERE IN ART, MUSIC AND PHYSICAL EDUCATION. A PREVIEW OF THE CONTENT OF EACH TELECAST WAS GIVEN WITH DETAILED INFORMATION FOR FOLLOWUP ACTIVITIES. THE STRUCTURE OF THE ART PROGRAM INCLUDED THE FUNDAMENTAL PRINCIPLES APPLICABLE TO SUCH BASIC AREAS AS LINE DRAWING, PICTURE MAKING, DESIGN AND CONSTRUCTION WITH THE…

INSTRUCTIONAL TELEVISION FOR THE UPPER PRIMARY. A TEACHER GUIDE, SEMESTER II.

ERIC Educational Resources Information Center

DELIKAN, ALFRED; AND OTHERS

TELECAST PROGRAMS FOR THE UPPER PRIMARY GRADES WERE IN ART, MUSIC, PHYSICAL EDUCATION AND SCIENCE. A PREVIEW OF THE CONTENT OF EACH UNIT WAS GIVEN, TOGETHER WITH DETAILED INFORMATION FOR FOLLOWUP ACTIVITY. IN THE ART SERIES, IT WAS RECOMMENDED THAT PUPIL PARTICIPATION TAKE PLACE AS SOON AS POSSIBLE AFTER THE TELECAST. INDIVIDUAL CREATIVITY WAS…

Training Scientific Thinking Skills: Evidence from an MCAT[superscript 2015]-Aligned Classroom Module

ERIC Educational Resources Information Center

Stevens, Courtney; Witkow, Melissa R.

2014-01-01

The present study reports on the development and evaluation of a classroom module to train scientific thinking skills. The module was implemented in two of four parallel sections of introductory psychology. To assess learning, a passage-based question set from the medical college admissions test (MCAT[superscript 2015]) preview guide was included…

Education or Entertainment: The Television Portrayal of Single Parents in the '90s.

ERIC Educational Resources Information Center

Holecek, Peggy

As the number of single-parent families has grown in the United States, network television programming has increasingly included programs portraying single parents and their attempts to cope with the role. In a study, the "Fall Preview" edition of "TV Guide" magazine was used to select programs featuring single mothers or…

A Theoretical Analysis of the Perceptual Span based on SWIFT Simulations of the n + 2 Boundary Paradigm

PubMed Central

Risse, Sarah; Hohenstein, Sven; Kliegl, Reinhold; Engbert, Ralf

2014-01-01

Eye-movement experiments suggest that the perceptual span during reading is larger than the fixated word, asymmetric around the fixation position, and shrinks in size contingent on the foveal processing load. We used the SWIFT model of eye-movement control during reading to test these hypotheses and their implications under the assumption of graded parallel processing of all words inside the perceptual span. Specifically, we simulated reading in the boundary paradigm and analysed the effects of denying the model to have valid preview of a parafoveal word n + 2 two words to the right of fixation. Optimizing the model parameters for the valid preview condition only, we obtained span parameters with remarkably realistic estimates conforming to the empirical findings on the size of the perceptual span. More importantly, the SWIFT model generated parafoveal processing up to word n + 2 without fitting the model to such preview effects. Our results suggest that asymmetry and dynamic modulation are plausible properties of the perceptual span in a parallel word-processing model such as SWIFT. Moreover, they seem to guide the flexible distribution of processing resources during reading between foveal and parafoveal words. PMID:24771996

Semantic and Plausibility Preview Benefit Effects in English: Evidence from Eye Movements

PubMed Central

Schotter, Elizabeth R.; Jia, Annie

2016-01-01

Theories of preview benefit in reading hinge on integration across saccades and the idea that preview benefit is greater the more similar the preview and target are. Schotter (2013) reported preview benefit from a synonymous preview, but it is unclear whether this effect occurs because of similarity between the preview and target (integration), or because of contextual fit of the preview—synonyms satisfy both accounts. Studies in Chinese have found evidence for preview benefit for words that are unrelated to the target, but are contextually plausible (Yang, Li, Wang, Slattery, & Rayner, 2014; Yang, Wang, Tong, & Rayner, 2012), which is incompatible with an integration account but supports a contextual fit account. Here, we used plausible and implausible unrelated previews in addition to plausible synonym, antonym, and identical previews to further investigate these accounts for readers of English. Early reading measures were shorter for all plausible preview conditions compared to the implausible preview condition. In later reading measures, a benefit for the plausible unrelated preview condition was not observed. In a second experiment, we asked questions that probed whether the reader encoded the preview or target. Readers were more likely to report the preview when they had skipped the word and not regressed to it, and when the preview was plausible. Thus, under certain circumstances, the preview word is processed to a high level of representation (i.e., semantic plausibility) regardless of its relationship to the target, but its influence on reading is relatively short-lived, being replaced by the target word, when fixated. PMID:27123754

Synonyms Provide Semantic Preview Benefit in English

PubMed Central

Schotter, Elizabeth R.

2013-01-01

While orthographic and phonological preview benefits in reading are uncontroversial (see Schotter, Angele, & Rayner, 2012 for a review), researchers have debated the existence of semantic preview benefit with positive evidence in Chinese and German, but no support in English. Two experiments, using the gazecontingent boundary paradigm (Rayner, 1975), show that semantic preview benefit can be observed in English when the preview and target are synonyms (share the same or highly similar meaning, e.g., curlers-rollers). However, no semantic preview benefit was observed for semantic associates (e.g., curlers-styling). These different preview conditions represent different degrees to which the meaning of the sentence changes when the preview is replaced by the target. When this continuous variable (determined by a norming procedure) was used as the predictor in the analyses, there was a significant relationship between it and all reading time measures, suggesting that similarity in meaning between what is accessed parafoveally and what is processed foveally may be an important influence on the presence of semantic preview benefit. Why synonyms provide semantic preview benefit in reading English is discussed in relation to (1) previous failures to find semantic preview benefit in English and (2) the fact that semantic preview benefit is observed in other languages even for non-synonymous words. Semantic preview benefit is argued to depend on several factors—attentional resources, depth of orthography, and degree of similarity between preview and target. PMID:24347813

Leadership Aspects of Hidden Curriculum Students Practice in Nigerian Universities: A Preview of Students' Union Government Contributions in University Governance

ERIC Educational Resources Information Center

Emesini, Nnenna Orieoma

2016-01-01

The paper examined the leadership aspect of Hidden Curriculum that students practice in Nigerian Universities and their contributions to university governance. Four research questions guided the study and Ex-Post-Facto Method was adopted as the design. Unstructured interviews with staff/students officials cum critical analysis of Students' Union…

Word Skipping During Sentence Reading: Effects of Lexicality on Parafoveal Processing

PubMed Central

Choi, Wonil; Gordon, Peter C.

2013-01-01

Two experiments examined how lexical status affects the targeting of saccades during reading by using the boundary technique to vary independently the content of a letter string when seen in parafoveal preview and when directly fixated. Experiment 1 measured the skipping rate for a target word embedded in a sentence under three parafoveal preview conditions: full preview (e.g. brain-brain), pseudohomophone preview (e.g. brane-brain), and orthographic nonword control preview (e.g. brant-brain); in the first condition the preview string was always an English word while in the second and third conditions it was always a nonword. Experiment 2 investigated three conditions where the preview string was always a word: full preview (e.g. beach-beach), homophone preview (e.g. beech-beach), and orthographic control preview (e.g. bench-beach). None of the letter string manipulations used to create the preview conditions in the experiments disrupted sub-lexical orthographic or phonological patterns. In Experiment 1 higher skipping rates were observed for the full (lexical) preview condition, which consisted of a word, compared to the nonword preview conditions (pseudohomophone and orthographic-control). In contrast Experiment 2 showed no difference in skipping rates across the three types of lexical preview conditions (full, homophone and orthographic control), though preview type did influence reading times. This pattern indicates that skipping depends not only on the presence of disrupted sub-lexical patterns of orthography or phonology but is also critically dependent on processes that are sensitive to the lexical status of letter strings in the parafovea. PMID:24170376

Semantic preview benefit during reading.

PubMed

Hohenstein, Sven; Kliegl, Reinhold

2014-01-01

Word features in parafoveal vision influence eye movements during reading. The question of whether readers extract semantic information from parafoveal words was studied in 3 experiments by using a gaze-contingent display change technique. Subjects read German sentences containing 1 of several preview words that were replaced by a target word during the saccade to the preview (boundary paradigm). In the 1st experiment the preview word was semantically related or unrelated to the target. Fixation durations on the target were shorter for semantically related than unrelated previews, consistent with a semantic preview benefit. In the 2nd experiment, half the sentences were presented following the rules of German spelling (i.e., previews and targets were printed with an initial capital letter), and the other half were presented completely in lowercase. A semantic preview benefit was obtained under both conditions. In the 3rd experiment, we introduced 2 further preview conditions, an identical word and a pronounceable nonword, while also manipulating the text contrast. Whereas the contrast had negligible effects, fixation durations on the target were reliably different for all 4 types of preview. Semantic preview benefits were greater for pretarget fixations closer to the boundary (large preview space) and, although not as consistently, for long pretarget fixation durations (long preview time). The results constrain theoretical proposals about eye movement control in reading. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

Semantic preview benefit in reading English: The effect of initial letter capitalization.

PubMed

Rayner, Keith; Schotter, Elizabeth R

2014-08-01

A major controversy in reading research is whether semantic information is obtained from the word to the right of the currently fixated word (word n + 1). Although most evidence has been negative in English, semantic preview benefit has been observed for readers of Chinese and German. In the present experiment, we investigated whether the discrepancy between English and German may be attributable to a difference in visual properties of the orthography: the first letter of a noun is always capitalized in German, but is only occasionally capitalized in English. This visually salient property may draw greater attention to the word during parafoveal preview and thus increase preview benefit generally (and lead to a greater opportunity for semantic preview benefit). We used English target nouns that can either be capitalized (e.g., We went to the critically acclaimed Ballet of Paris while on vacation.) or not (e.g., We went to the critically acclaimed ballet that was showing in Paris.) and manipulated the capitalization of the preview accordingly, to determine whether capitalization modulates preview benefit in English. The gaze-contingent boundary paradigm was used with identical, semantically related, and unrelated previews. Consistent with our hypothesis, we found numerically larger preview benefits when the preview/target was capitalized than when it was lowercase. Crucially, semantic preview benefit was not observed when the preview/target word was not capitalized, but was observed when the preview/target word was capitalized.

Semantic Preview Benefit in Reading English: The Effect of Initial Letter Capitalization

PubMed Central

Rayner, Keith; Schotter, Elizabeth R.

2014-01-01

A major controversy in reading research is whether semantic information is obtained from the word to the right of the currently fixated word (word n+1). While most evidence has been negative in English, semantic preview benefit has been observed for readers of Chinese and German. In the present experiment, we investigated whether the discrepancy between English and German may be due to a difference in visual properties of the orthography: the first letter of a noun is always capitalized in German, but is only occasionally capitalized in English. This visually salient property may draw greater attention to the word during parafoveal preview and thus increase preview benefit generally (and lead to a greater opportunity for semantic preview benefit). We used English target nouns that can either be capitalized (e.g., We went to the critically acclaimed Ballet of Paris while on vacation.) or not (e.g., We went to the critically acclaimed ballet that was showing in Paris.) and manipulated the capitalization of the preview accordingly, to determine if capitalization modulates preview benefit in English. The gaze-contingent boundary paradigm was used with identical, semantically related, and unrelated previews. Consistent with our hypothesis, we found numerically larger preview benefits when the preview/target was capitalized than when it was lowercase. Crucially, semantic preview benefit was not observed when the preview/target word was not capitalized, but was observed when the preview/target word was capitalized. PMID:24820439

Distributed Trust Management and Rogue AV Software

DTIC Science & Technology

2010-06-10

Integrate with QTM – Particularly important in federated systems (e.g., dynamically composable SOAs) • Investigate the use of reactive mechanisms – Global...of demonstrators surfaced on Capitol Hill in opposition to the Democrats’ health care legislation. MAGAZINE PREVIEW Making Health Care Better By...sale will be sent on saving green forests in Amazonia . Have more questions? You can contact us easy via Online Supoort. Green AV an award-winning

Reversed preview benefit effects: Forced fixations emphasize the importance of parafoveal vision for efficient reading

PubMed Central

Schotter, Elizabeth R.; Leinenger, Mallorie

2016-01-01

Current theories of eye movement control in reading posit that processing of an upcoming parafoveal preview word is used to facilitate processing of that word once it is fixated (i.e., a foveal target word). This preview benefit is demonstrated by shorter fixation durations in the case of valid (i.e., identical or linguistically similar) compared to invalid (i.e., dissimilar) preview conditions. However, we suggest that processing of the preview can directly influence fixation behavior on the target, independent of similarity between them. In Experiment 1, unrelated high and low frequency words were used as orthogonally crossed previews and targets and we observed a reversed preview benefit for low frequency targets—shorter fixation durations with an invalid, higher frequency preview compared to a valid, low frequency preview. In Experiment 2, the target words were replaced with orthographically legal and illegal nonwords and we found a similar effect of preview frequency on fixation durations on the targets, as well as a bimodal distribution in the illegal nonword target conditions with a denser early peak for high than low frequency previews. In Experiment 3, nonwords were used as previews for high and low frequency targets, replicating standard findings that “denied” preview increases fixation durations and the influence of target properties. These effects can be explained by forced fixations, cases in which fixations on the target were shortened as a consequence of the timing of word recognition of the preview relative to the time course of saccade programming to that word from the prior one. That is, the preview word was (at least partially) recognized so that it should have been skipped, but the word could not be skipped because the saccade to that word was in a non-labile stage. In these cases, the system pre-initiates the subsequent saccade off the upcoming word to the following word and the intervening fixation is short. PMID:27732044

Preview Fixation Duration Modulates Identical and Semantic Preview Benefit in Chinese Reading

ERIC Educational Resources Information Center

Yan, Ming; Risse, Sarah; Zhou, Xiaolin; Kliegl, Reinhold

2012-01-01

Semantic preview benefit from parafoveal words is critical for proposals of distributed lexical processing during reading. Semantic preview benefit has been demonstrated for Chinese reading with the boundary paradigm in which unrelated or semantically related previews of a target word "N" + 1 are replaced by the target word once the eyes cross an…

What Are the Costs of Degraded Parafoveal Previews during Silent Reading?

ERIC Educational Resources Information Center

Vasilev, Martin R.; Slattery, Timothy J.; Kirkby, Julie A.; Angele, Bernhard

2018-01-01

It has been suggested that the preview benefit effect is actually a combination of preview benefit and preview costs. Marx et al. (2015) proposed that visually degrading the parafoveal preview reduces the costs associated with traditional parafoveal letter masks used in the boundary paradigm (Rayner, 1975), thus leading to a more neutral baseline.…

More target features in visual working memory leads to poorer search guidance: Evidence from contralateral delay activity

PubMed Central

Schmidt, Joseph; MacNamara, Annmarie; Proudfit, Greg Hajcak; Zelinsky, Gregory J.

2014-01-01

The visual-search literature has assumed that the top-down target representation used to guide search resides in visual working memory (VWM). We directly tested this assumption using contralateral delay activity (CDA) to estimate the VWM load imposed by the target representation. In Experiment 1, observers previewed four photorealistic objects and were cued to remember the two objects appearing to the left or right of central fixation; Experiment 2 was identical except that observers previewed two photorealistic objects and were cued to remember one. CDA was measured during a delay following preview offset but before onset of a four-object search array. One of the targets was always present, and observers were asked to make an eye movement to it and press a button. We found lower magnitude CDA on trials when the initial search saccade was directed to the target (strong guidance) compared to when it was not (weak guidance). This difference also tended to be larger shortly before search-display onset and was largely unaffected by VWM item-capacity limits or number of previews. Moreover, the difference between mean strong- and weak-guidance CDA was proportional to the increase in search time between mean strong-and weak-guidance trials (as measured by time-to-target and reaction-time difference scores). Contrary to most search models, our data suggest that trials resulting in the maintenance of more target features results in poor search guidance to a target. We interpret these counterintuitive findings as evidence for strong search guidance using a small set of highly discriminative target features that remain after pruning from a larger set of features, with the load imposed on VWM varying with this feature-consolidation process. PMID:24599946

More target features in visual working memory leads to poorer search guidance: evidence from contralateral delay activity.

PubMed

Schmidt, Joseph; MacNamara, Annmarie; Proudfit, Greg Hajcak; Zelinsky, Gregory J

2014-03-05

The visual-search literature has assumed that the top-down target representation used to guide search resides in visual working memory (VWM). We directly tested this assumption using contralateral delay activity (CDA) to estimate the VWM load imposed by the target representation. In Experiment 1, observers previewed four photorealistic objects and were cued to remember the two objects appearing to the left or right of central fixation; Experiment 2 was identical except that observers previewed two photorealistic objects and were cued to remember one. CDA was measured during a delay following preview offset but before onset of a four-object search array. One of the targets was always present, and observers were asked to make an eye movement to it and press a button. We found lower magnitude CDA on trials when the initial search saccade was directed to the target (strong guidance) compared to when it was not (weak guidance). This difference also tended to be larger shortly before search-display onset and was largely unaffected by VWM item-capacity limits or number of previews. Moreover, the difference between mean strong- and weak-guidance CDA was proportional to the increase in search time between mean strong-and weak-guidance trials (as measured by time-to-target and reaction-time difference scores). Contrary to most search models, our data suggest that trials resulting in the maintenance of more target features results in poor search guidance to a target. We interpret these counterintuitive findings as evidence for strong search guidance using a small set of highly discriminative target features that remain after pruning from a larger set of features, with the load imposed on VWM varying with this feature-consolidation process.

The Effects of Cultural Familiarity and Question Preview Type on the Listening Comprehension of L2 Learners at the Secondary Level

ERIC Educational Resources Information Center

Li, Chen-Hong; Chen, Cai-Jun; Wu, Meng-Jie; Kuo, Ya-Chu; Tseng, Yun-Ting; Tsai, Shi-Yi; Shih, Hung-Chun

2017-01-01

We examined the effect of cultural familiarity and question-preview types on the listening comprehension of L2 learners. The results showed that the participants who received the full question-preview format scored higher than those receiving either the answer-option preview or question-stem preview, despite a statistically nonsignificant…

An Empirical Human Controller Model for Preview Tracking Tasks.

PubMed

van der El, Kasper; Pool, Daan M; Damveld, Herman J; van Paassen, Marinus Rene M; Mulder, Max

2016-11-01

Real-life tracking tasks often show preview information to the human controller about the future track to follow. The effect of preview on manual control behavior is still relatively unknown. This paper proposes a generic operator model for preview tracking, empirically derived from experimental measurements. Conditions included pursuit tracking, i.e., without preview information, and tracking with 1 s of preview. Controlled element dynamics varied between gain, single integrator, and double integrator. The model is derived in the frequency domain, after application of a black-box system identification method based on Fourier coefficients. Parameter estimates are obtained to assess the validity of the model in both the time domain and frequency domain. Measured behavior in all evaluated conditions can be captured with the commonly used quasi-linear operator model for compensatory tracking, extended with two viewpoints of the previewed target. The derived model provides new insights into how human operators use preview information in tracking tasks.

Virtual Reality Lab Assistant

NASA Technical Reports Server (NTRS)

Saha, Hrishikesh; Palmer, Timothy A.

1996-01-01

Virtual Reality Lab Assistant (VRLA) demonstration model is aligned for engineering and material science experiments to be performed by undergraduate and graduate students in the course as a pre-lab simulation experience. This will help students to get a preview of how to use the lab equipment and run experiments without using the lab hardware/software equipment. The quality of the time available for laboratory experiments can be significantly improved through the use of virtual reality technology.

Effects of workload preview on task scheduling during simulated instrument flight.

PubMed

Andre, A D; Heers, S T; Cashion, P A

1995-01-01

Our study examined pilot scheduling behavior in the context of simulated instrument flight. Over the course of the flight, pilots flew along specified routes while scheduling and performing several flight-related secondary tasks. The first phase of flight was flown under low-workload conditions, whereas the second phase of flight was flown under high-workload conditions in the form of increased turbulence and a disorganized instrument layout. Six pilots were randomly assigned to each of three workload preview groups. Subjects in the no-preview group were not given preview of the increased-workload conditions. Subjects in the declarative preview group were verbally informed of the nature of the flight workload manipulation but did not receive any practice under the high-workload conditions. Subjects in the procedural preview group received the same instructions as the declarative preview group but also flew half of the practice flight under the high-workload conditions. The results show that workload preview fostered efficient scheduling strategies. Specifically, those pilots with either declarative or procedural preview of future workload demands adopted an efficient strategy of scheduling more of the difficult secondary tasks during the low-workload phase of flight. However, those pilots given a procedural preview showed the greatest benefits in overall flight performance.

Target selection biases from recent experience transfer across effectors.

PubMed

Moher, Jeff; Song, Joo-Hyun

2016-02-01

Target selection is often biased by an observer's recent experiences. However, not much is known about whether these selection biases influence behavior across different effectors. For example, does looking at a red object make it easier to subsequently reach towards another red object? In the current study, we asked observers to find the uniquely colored target object on each trial. Randomly intermixed pre-trial cues indicated the mode of action: either an eye movement or a visually guided reach movement to the target. In Experiment 1, we found that priming of popout, reflected in faster responses following repetition of the target color on consecutive trials, occurred regardless of whether the effector was repeated from the previous trial or not. In Experiment 2, we examined whether an inhibitory selection bias away from a feature could transfer across effectors. While priming of popout reflects both enhancement of the repeated target features and suppression of the repeated distractor features, the distractor previewing effect isolates a purely inhibitory component of target selection in which a previewed color is presented in a homogenous display and subsequently inhibited. Much like priming of popout, intertrial suppression biases in the distractor previewing effect transferred across effectors. Together, these results suggest that biases for target selection driven by recent trial history transfer across effectors. This indicates that representations in memory that bias attention towards or away from specific features are largely independent from their associated actions.

A Drastic Change in Background Luminance or Motion Degrades the Preview Benefit.

PubMed

Osugi, Takayuki; Murakami, Ikuya

2017-01-01

When some distractors (old items) precede some others (new items) in an inefficient visual search task, the search is restricted to new items, and yields a phenomenon termed the preview benefit. It has recently been demonstrated that, in this preview search task, the onset of repetitive changes in the background disrupts the preview benefit, whereas a single transient change in the background does not. In the present study, we explored this effect with dynamic background changes occurring in the context of realistic scenes, to examine the robustness and usefulness of visual marking. We examined whether preview benefit in a preview search task survived through task-irrelevant changes in the scene, namely a luminance change and the initiation of coherent motion, both occurring in the background. Luminance change of the background disrupted preview benefit if it was synchronized with the onset of the search display. Furthermore, although the presence of coherent background motion per se did not affect preview benefit, its synchronized initiation with the onset of the search display did disrupt preview benefit if the motion speed was sufficiently high. These results suggest that visual marking can be destroyed by a transient event in the scene if that event is sufficiently drastic.

Semantic Processing of Previews within Compound Words

ERIC Educational Resources Information Center

White, Sarah J.; Bertram, Raymond; Hyona, Jukka

2008-01-01

Previous studies have suggested that previews of words prior to fixation can be processed orthographically, but not semantically, during reading of sentences (K. Rayner, D. A. Balota, & A. Pollatsek, 1986). The present study tested whether semantic processing of previews can occur within words. The preview of the second constituent of…

A metadata-driven approach to data repository design.

PubMed

Harvey, Matthew J; McLean, Andrew; Rzepa, Henry S

2017-01-01

The design and use of a metadata-driven data repository for research data management is described. Metadata is collected automatically during the submission process whenever possible and is registered with DataCite in accordance with their current metadata schema, in exchange for a persistent digital object identifier. Two examples of data preview are illustrated, including the demonstration of a method for integration with commercial software that confers rich domain-specific data analytics without introducing customisation into the repository itself.

Graphical interface between the CIRSSE testbed and CimStation software with MCS/CTOS

NASA Technical Reports Server (NTRS)

Hron, Anna B.

1992-01-01

This research is concerned with developing a graphical simulation of the testbed at the Center for Intelligent Robotic Systems for Space Exploration (CIRSSE) and the interface which allows for communication between the two. Such an interface is useful in telerobotic operations, and as a functional interaction tool for testbed users. Creating a simulated model of a real world system, generates inevitable calibration discrepancies between them. This thesis gives a brief overview of the work done to date in the area of workcell representation and communication, describes the development of the CIRSSE interface, and gives a direction for future work in the area of system calibration. The CimStation software used for development of this interface, is a highly versatile robotic workcell simulation package which has been programmed for this application with a scale graphical model of the testbed, and supporting interface menu code. A need for this tool has been identified for the reasons of path previewing, as a window on teleoperation and for calibration of simulated vs. real world models. The interface allows information (i.e., joint angles) generated by CimStation to be sent as motion goal positions to the testbed robots. An option of the interface has been established such that joint angle information generated by supporting testbed algorithms (i.e., TG, collision avoidance) can be piped through CimStation as a visual preview of the path.

Evaluating L2 Readers' Previewing Strategies Using Eye Tracking

ERIC Educational Resources Information Center

Prichard, Caleb; Atkins, Andrew

2016-01-01

Previewing a text is a key global reading strategy. Previewing may increase comprehension as it can activate schema, increase global awareness of the text, and enhance the use of other reading strategies. Despite its importance, an explicit focus on previewing skills has been lacking and previous research on the reading strategies of second…

Using the lead vehicle as preview sensor in convoy vehicle active suspension control

NASA Astrophysics Data System (ADS)

Rahman, Mustafizur; Rideout, Geoff

2012-12-01

Both ride quality and roadholding of actively suspended vehicles can be improved by sensing the road ahead of the vehicle and using this information in a preview controller. Previous applications have used look-ahead sensors mounted on the front bumper to measure terrain beneath. Such sensors are vulnerable, potentially confused by water, snow, or other soft obstacles and offer a fixed preview time. For convoy vehicle applications, this paper proposes using the overall response of the preceding vehicle(s) to generate preview controller information for follower vehicles. A robust observer is used to estimate the states of a quarter-car vehicle model, from which road profile is estimated and passed on to the follower vehicle(s) to generate a preview function. The preview-active suspension, implemented in discrete time using a shift register approach to improve simulation time, reduces sprung mass acceleration and dynamic tyre deflection peaks by more than 50% and 40%, respectively. Terrain can change from one vehicle to the next if a loose obstacle is dislodged, or if the vehicle paths are sufficiently different so that one vehicle misses a discrete road event. The resulting spurious preview information can give suspension performance worse than that of a passive or conventional active system. In this paper, each vehicle can effectively estimate the road profile based on its own state trajectory. By comparing its own road estimate with the preview information, preview errors can be detected and suspension control quickly switched from preview to conventional active control to preserve performance improvements compared to passive suspensions.

The Effect of Stages and Levels of Automation and Reliability on Workload and Performance for Remotely Piloted Aircraft Operations

DTIC Science & Technology

2015-03-26

participant, it is assumed that no learning effects affected the data. Preview This chapter began with the background of RPAs and described a...for alarm- style automation systems; however, these attributes may be less relevant for other types of automation implementation. For example, with...and tactile and the speech channel was added for a total of seven channels that are being used in the DES software tool IMPRINT. This updated

Parafoveal preview during reading: Effects of sentence position

PubMed Central

White, Sarah J.; Warren, Tessa; Reichle, Erik D.

2011-01-01

Two experiments examined parafoveal preview for words located in the middle of sentences and at sentence boundaries. Parafoveal processing was shown to occur for words at sentence-initial, mid-sentence, and sentence-final positions. Both Experiments 1 and 2 showed reduced effects of preview on regressions out for sentence-initial words. In addition, Experiment 2 showed reduced preview effects on first-pass reading times for sentence-initial words. These effects of sentence position on preview could result from reduced parafoveal processing for sentence-initial words, or other processes specific to word reading at sentence boundaries. In addition to the effects of preview, the experiments also demonstrate variability in the effects of sentence wrap-up on different reading measures, indicating that the presence and time course of wrap-up effects may be modulated by text-specific factors. We also report simulations of Experiment 2 using version 10 of E-Z Reader (Reichle, Warren, & McConnell, 2009), designed to explore the possible mechanisms underlying parafoveal preview at sentence boundaries. PMID:21500948

Dissociating parafoveal preview benefit and parafovea-on-fovea effects during reading: A combined eye tracking and EEG study.

PubMed

Niefind, Florian; Dimigen, Olaf

2016-12-01

During reading, the parafoveal processing of an upcoming word n+1 can influence word recognition in two ways: It can affect fixation behavior during the preceding fixation on word n (parafovea-on-fovea effect, POF), and it can facilitate subsequent foveal processing once word n+1 is fixated (preview benefit). While preview benefits are established, evidence for POF effects is mixed. Recently, it has been suggested that POF effects exist, but have a delayed impact on saccade planning and thus coincide with preview benefits measured on word n+1. We combined eye movement and EEG recordings to investigate and separate neural correlates of POF and preview benefit effects. Participants read lists of nouns either in a boundary paradigm or the RSVP-with-flankers paradigm, while we recorded fixation- or event-related potentials (FRPs/ERPs), respectively. The validity and lexical frequency of the word shown as preview for the upcoming word n+1 were orthogonally manipulated. Analyses focused on the first fixation on word n+1. Preview validity (correct vs. incorrect preview) strongly modulated fixation times and electrophysiological N1 amplitudes, replicating previous findings. Importantly, gaze durations and FRPs measured on word n+1 were also affected by the frequency of the word shown as preview, with low-frequency previews eliciting a sustained, N400-like centroparietal negativity. Results support the idea that POF effects exist but affect word recognition with a delay. Lastly, once word n+1 was fixated, its frequency also modulated N1 amplitudes in ERPs and FRPs. Taken together, we separated immediate and delayed effects of parafoveal processing on brain correlates of word recognition. © 2016 Society for Psychophysiological Research.

Trans-saccadic parafoveal preview benefits in fluent reading: a study with fixation-related brain potentials.

PubMed

Dimigen, Olaf; Kliegl, Reinhold; Sommer, Werner

2012-08-01

During natural reading, a parafoveal preview of the upcoming word facilitates its subsequent recognition (e.g., shorter fixation durations compared to masked preview) but nothing is known about the neural correlates of this so-called preview benefit. Furthermore, while the evidence is strong that readers preprocess orthographic features of upcoming words, it is controversial whether word meaning can also be accessed parafoveally. We investigated the timing, scope, and electrophysiological correlates of parafoveal information use in reading by simultaneously recording eye movements and fixation-related brain potentials (FRPs) while participants read word lists fluently from left to right. For one word-the target-(e.g., "blade") parafoveal information was manipulated by showing an identical ("blade"), semantically related ("knife"), or unrelated ("sugar") word as preview. In boundary trials, the preview was shown parafoveally but changed to the correct target word during the incoming saccade. Replicating classic findings, target words were fixated shorter after identical previews. In the EEG, this benefit was reflected in an occipitotemporal preview positivity between 200 and 280 ms. In contrast, there was no facilitation from related previews. In parafoveal-on-foveal trials, preview and target were embedded at neighboring list positions without a display change. Consecutive fixation of two related words produced N400 priming effects, but only shortly (160 ms) after the second word was directly fixated. Results demonstrate that neural responses to words are substantially altered by parafoveal preprocessing under normal reading conditions. We found no evidence that word meaning contributes to these effects. Saccade-contingent display manipulations can be combined with EEG recordings to study extrafoveal perception in vision. Copyright © 2012 Elsevier Inc. All rights reserved.

Gwyscan: a library to support non-equidistant scanning probe microscope measurements

NASA Astrophysics Data System (ADS)

Klapetek, Petr; Yacoot, Andrew; Grolich, Petr; Valtr, Miroslav; Nečas, David

2017-03-01

We present a software library and related methodology for enabling easy integration of adaptive step (non-equidistant) scanning techniques into metrological scanning probe microscopes or scanning probe microscopes where individual x, y position data are recorded during measurements. Scanning with adaptive steps can reduce the amount of data collected in SPM measurements thereby leading to faster data acquisition, a smaller amount of data collection required for a specific analytical task and less sensitivity to mechanical and thermal drift. Implementation of adaptive scanning routines into a custom built microscope is not normally an easy task: regular data are much easier to handle for previewing (e.g. levelling) and storage. We present an environment to make implementation of adaptive scanning easier for an instrument developer, specifically taking into account data acquisition approaches that are used in high accuracy microscopes as those developed by National Metrology Institutes. This includes a library with algorithms written in C and LabVIEW for handling data storage, regular mesh preview generation and planning the scan path on basis of different assumptions. A set of modules for Gwyddion open source software for handling these data and for their further analysis is presented. Using this combination of data acquisition and processing tools one can implement adaptive scanning in a relatively easy way into an instrument that was previously measuring on a regular grid. The performance of the presented approach is shown and general non-equidistant data processing steps are discussed.

Cooperative global optimal preview tracking control of linear multi-agent systems: an internal model approach

NASA Astrophysics Data System (ADS)

Lu, Yanrong; Liao, Fucheng; Deng, Jiamei; Liu, Huiyang

2017-09-01

This paper investigates the cooperative global optimal preview tracking problem of linear multi-agent systems under the assumption that the output of a leader is a previewable periodic signal and the topology graph contains a directed spanning tree. First, a type of distributed internal model is introduced, and the cooperative preview tracking problem is converted to a global optimal regulation problem of an augmented system. Second, an optimal controller, which can guarantee the asymptotic stability of the augmented system, is obtained by means of the standard linear quadratic optimal preview control theory. Third, on the basis of proving the existence conditions of the controller, sufficient conditions are given for the original problem to be solvable, meanwhile a cooperative global optimal controller with error integral and preview compensation is derived. Finally, the validity of theoretical results is demonstrated by a numerical simulation.

Parafoveal preview benefit in unspaced and spaced Chinese reading.

PubMed

Cui, Lei; Drieghe, Denis; Bai, Xuejun; Yan, Guoli; Liversedge, Simon P

2014-01-01

In an eye movement experiment during reading, we compared parafoveal preview benefit during the reading of Chinese sentences either in the familiar, unspaced format or with spaces inserted between the words. Single-character words or the first of a two-character word were either presented normally or were replaced by a pseudocharacter in the preview. Results indicate that word spacing increased the parafoveal preview benefit but only for the one-character target words. We hypothesized that the incorrect preview of the first character of the two-character word prevented parafoveal processing of the ensuing character(s), effectively nullifying any benefits from the spacing. Our results suggest that word boundary demarcation allows for more precise focusing of attention.

Measuring Memory and Attention to Preview in Motion.

PubMed

Jagacinski, Richard J; Hammond, Gordon M; Rizzi, Emanuele

2017-08-01

Objective Use perceptual-motor responses to perturbations to reveal the spatio-temporal detail of memory for the recent past and attention to preview when participants track a winding roadway. Background Memory of the recently passed roadway can be inferred from feedback control models of the participants' manual movement patterns. Similarly, attention to preview of the upcoming roadway can be inferred from feedforward control models of manual movement patterns. Method Perturbation techniques were used to measure these memory and attention functions. Results In a laboratory tracking task, the bandwidth of lateral roadway deviations was found to primarily influence memory for the past roadway rather than attention to preview. A secondary auditory/verbal/vocal memory task resulted in higher velocity error and acceleration error in the tracking task but did not affect attention to preview. Attention to preview was affected by the frequency pattern of sinusoidal perturbations of the roadway. Conclusion Perturbation techniques permit measurement of the spatio-temporal span of memory and attention to preview that affect tracking a winding roadway. They also provide new ways to explore goal-directed forgetting and spatially distributed attention in the context of movement. More generally, these techniques provide sensitive measures of individual differences in cognitive aspects of action. Application Models of driving behavior and assessment of driving skill may benefit from more detailed spatio-temporal measurement of attention to preview.

Role of route previewing strategies on climbing fluency and exploratory movements.

PubMed

Seifert, Ludovic; Cordier, Romain; Orth, Dominic; Courtine, Yoan; Croft, James L

2017-01-01

This study examined the role of route previewing strategies on climbing fluency and on exploratory movements of the limbs, in order to understand whether previewing helps people to perceive and to realize affordances. Eight inexperienced and ten experienced climbers previewed a 10 m high route of 5b difficulty on French scale, then climbed it with a top-rope as fluently as possible. Gaze behavior was collected from an eye tracking system during the preview and allowed us to determine the number of times they scanned the route, and which of four route previewing strategies (fragmentary, ascending, zigzagging, and sequence-of-blocks) they used. Five inertial measurement units (IMU) (3D accelerometer, 3D gyroscope, 3D magnetometer) were attached to the hip, both feet, and forearms to analyze the vertical acceleration and direction of each limb and hip during the ascent. We were able to detect movement and immobility phases of each IMU using segmentation and classification processes. Depending on whether the limbs and/or hip were moving, five states of behavior were detected: immobility, postural regulation, hold exploration, hold change, and hold traction. Using cluster analysis we identified four clusters of gaze behavior during route previewing depending on route preview duration, number of scan paths, fixations duration, ascending, zigzagging, and sequence-of-blocks strategies. The number of scan paths was positively correlated with relative duration of exploration and negatively correlated with relative duration of hold changes during the ascent. Additionally, a high relative duration of sequence-of-blocks strategy and zigzagging strategy were associated with a high relative duration of immobility during the ascent. Route previewing might help to pick up functional information about reachable, graspable, and usable holds, in order to chain movements together and to find the route. In other words, route previewing might contribute to perceiving and realizing nested affordances.

Sleep-dependent modulation of affectively guided decision-making.

PubMed

Pace-Schott, Edward F; Nave, Genevieve; Morgan, Alexandra; Spencer, Rebecca M C

2012-02-01

A question of great interest in current sleep research is whether and how sleep might facilitate complex cognitive skills such as decision-making. The Iowa Gambling Task (IGT) was used to investigate effects of sleep on affect-guided decision-making. After a brief standardized preview of the IGT that was insufficient to learn its underlying rule, participants underwent a 12-h delay containing either a normal night's sleep (Sleep group; N = 28) or continuous daytime wake (Wake group; N = 26). Following the delay, both groups performed the full IGT. To control for circadian effects, two additional groups performed both the preview and the full task either in the morning (N = 17) or the evening (N = 21). In the IGT, four decks of cards were presented. Draws from two 'advantageous decks' yielded low play-money rewards, occasional low losses and, over multiple draws, a net gain. Draws from 'disadvantageous' decks yielded high rewards, occasional high losses and, over multiple draws, a net loss. Participants were instructed to win and avoid losing as much as possible, and better performance was defined as more advantageous draws. Relative to the wake group, the sleep group showed both superior behavioral outcome (more advantageous draws) and superior rule understanding (blindly judged from statements written at task completion). Neither measure differentiated the two control groups. These results illustrate a role of sleep in optimizing decision-making, a benefit that may be brought about by changes in underlying emotional or cognitive processes. © 2011 European Sleep Research Society.

Coordination of Word Recognition and Oculomotor Control During Reading: The Role of Implicit Lexical Decisions

PubMed Central

Choi, Wonil; Gordon, Peter C.

2013-01-01

The coordination of word-recognition and oculomotor processes during reading was evaluated in two eye-tracking experiments that examined how word skipping, where a word is not fixated during first-pass reading, is affected by the lexical status of a letter string in the parafovea and ease of recognizing that string. Ease of lexical recognition was manipulated through target-word frequency (Experiment 1) and through repetition priming between prime-target pairs embedded in a sentence (Experiment 2). Using the gaze-contingent boundary technique the target word appeared in the parafovea either with full preview or with transposed-letter (TL) preview. The TL preview strings were nonwords in Experiment 1 (e.g., bilnk created from the target blink), but were words in Experiment 2 (e.g., sacred created from the target scared). Experiment 1 showed greater skipping for high-frequency than low-frequency target words in the full preview condition but not in the TL preview (nonword) condition. Experiment 2 showed greater skipping for target words that repeated an earlier prime word than for those that did not, with this repetition priming occurring both with preview of the full target and with preview of the target’s TL neighbor word. However, time to progress from the word after the target was greater following skips of the TL preview word, whose meaning was anomalous in the sentence context, than following skips of the full preview word whose meaning fit sensibly into the sentence context. Together, the results support the idea that coordination between word-recognition and oculomotor processes occurs at the level of implicit lexical decisions. PMID:23106372

Semantic parafoveal-on-foveal effects and preview benefits in reading: Evidence from Fixation Related Potentials.

PubMed

López-Peréz, P J; Dampuré, J; Hernández-Cabrera, J A; Barber, H A

2016-11-01

During reading parafoveal information can affect the processing of the word currently fixated (parafovea-on-fovea effect) and words perceived parafoveally can facilitate their subsequent processing when they are fixated on (preview effect). We investigated parafoveal processing by simultaneously recording eye movements and EEG measures. Participants read word pairs that could be semantically associated or not. Additionally, the boundary paradigm allowed us to carry out the same manipulation on parafoveal previews that were displayed until reader's gaze moved to the target words. Event Related Potentials time-locked to the prime-preview presentation showed a parafoveal-on-foveal N400 effect. Fixation Related Potentials time locked to the saccade offset showed an N400 effect related to the prime-target relationship. Furthermore, this later effect interacted with the semantic manipulation of the previews, supporting a semantic preview benefit. These results demonstrate that at least under optimal conditions foveal and parafoveal information can be simultaneously processed and integrated. Copyright © 2016 Elsevier Inc. All rights reserved.

Visual working memory simultaneously guides facilitation and inhibition during visual search.

PubMed

Dube, Blaire; Basciano, April; Emrich, Stephen M; Al-Aidroos, Naseem

2016-07-01

During visual search, visual working memory (VWM) supports the guidance of attention in two ways: It stores the identity of the search target, facilitating the selection of matching stimuli in the search array, and it maintains a record of the distractors processed during search so that they can be inhibited. In two experiments, we investigated whether the full contents of VWM can be used to support both of these abilities simultaneously. In Experiment 1, participants completed a preview search task in which (a) a subset of search distractors appeared before the remainder of the search items, affording participants the opportunity to inhibit them, and (b) the search target varied from trial to trial, requiring the search target template to be maintained in VWM. We observed the established signature of VWM-based inhibition-reduced ability to ignore previewed distractors when the number of distractors exceeds VWM's capacity-suggesting that VWM can serve this role while also representing the target template. In Experiment 2, we replicated Experiment 1, but added to the search displays a singleton distractor that sometimes matched the color (a task-irrelevant feature) of the search target, to evaluate capture. We again observed the signature of VWM-based preview inhibition along with attentional capture by (and, thus, facilitation of) singletons matching the target template. These findings indicate that more than one VWM representation can bias attention at a time, and that these representations can separately affect selection through either facilitation or inhibition, placing constraints on existing models of the VWM-based guidance of attention.

Subset selective search on the basis of color and preview.

PubMed

Donk, Mieke

2017-01-01

In the preview paradigm observers are presented with one set of elements (the irrelevant set) followed by the addition of a second set among which the target is presented (the relevant set). Search efficiency in such a preview condition has been demonstrated to be higher than that in a full-baseline condition in which both sets are simultaneously presented, suggesting that a preview of the irrelevant set reduces its influence on the search process. However, numbers of irrelevant and relevant elements are typically not independently manipulated. Moreover, subset selective search also occurs when both sets are presented simultaneously but differ in color. The aim of the present study was to investigate how numbers of irrelevant and relevant elements contribute to preview search in the absence and presence of a color difference between subsets. In two experiments it was demonstrated that a preview reduced the influence of the number of irrelevant elements in the absence but not in the presence of a color difference between subsets. In the presence of a color difference, a preview lowered the effect of the number of relevant elements but only when the target was defined by a unique feature within the relevant set (Experiment 1); when the target was defined by a conjunction of features (Experiment 2), search efficiency as a function of the number of relevant elements was not modulated by a preview. Together the results are in line with the idea that subset selective search is based on different simultaneously operating mechanisms.

Previewing: A Successful Strategy for Students with Autism

ERIC Educational Resources Information Center

Grenier, Michelle; Yeaton, Pat

2011-01-01

This article addresses the effectiveness of previewing for students with autism spectrum disorders in general physical education. Previewing is an instructional strategy that takes place before the student's physical education class and involves the introduction of skills that will be performed in physical education. Social stories and visual…

Extrafoveal preview benefit during free-viewing visual search in the monkey

PubMed Central

Krishna, B. Suresh; Ipata, Anna E.; Bisley, James W.; Gottlieb, Jacqueline; Goldberg, Michael E.

2014-01-01

Abstract Previous studies have shown that subjects require less time to process a stimulus at the fovea after a saccade if they have viewed the same stimulus in the periphery immediately prior to the saccade. This extrafoveal preview benefit indicates that information about the visual form of an extrafoveally viewed stimulus can be transferred across a saccade. Here, we extend these findings by demonstrating and characterizing a similar extrafoveal preview benefit in monkeys during a free-viewing visual search task. We trained two monkeys to report the orientation of a target among distractors by releasing one of two bars with their hand; monkeys were free to move their eyes during the task. Both monkeys took less time to indicate the orientation of the target after foveating it, when the target lay closer to the fovea during the previous fixation. An extrafoveal preview benefit emerged even if there was more than one intervening saccade between the preview and the target fixation, indicating that information about target identity could be transferred across more than one saccade and could be obtained even if the search target was not the goal of the next saccade. An extrafoveal preview benefit was also found for distractor stimuli. These results aid future physiological investigations of the extrafoveal preview benefit. PMID:24403392

Quicklook overview of model changes in Melcor 2.2: Rev 6342 to Rev 9496

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humphries, Larry L.

2017-05-01

MELCOR 2.2 is a significant official release of the MELCOR code with many new models and model improvements. This report provides the code user with a quick review and characterization of new models added, changes to existing models, the effect of code changes during this code development cycle (rev 6342 to rev 9496), a preview of validation results with this code version. More detailed information is found in the code Subversion logs as well as the User Guide and Reference Manuals.

FEBio: finite elements for biomechanics.

PubMed

Maas, Steve A; Ellis, Benjamin J; Ateshian, Gerard A; Weiss, Jeffrey A

2012-01-01

In the field of computational biomechanics, investigators have primarily used commercial software that is neither geared toward biological applications nor sufficiently flexible to follow the latest developments in the field. This lack of a tailored software environment has hampered research progress, as well as dissemination of models and results. To address these issues, we developed the FEBio software suite (http://mrl.sci.utah.edu/software/febio), a nonlinear implicit finite element (FE) framework, designed specifically for analysis in computational solid biomechanics. This paper provides an overview of the theoretical basis of FEBio and its main features. FEBio offers modeling scenarios, constitutive models, and boundary conditions, which are relevant to numerous applications in biomechanics. The open-source FEBio software is written in C++, with particular attention to scalar and parallel performance on modern computer architectures. Software verification is a large part of the development and maintenance of FEBio, and to demonstrate the general approach, the description and results of several problems from the FEBio Verification Suite are presented and compared to analytical solutions or results from other established and verified FE codes. An additional simulation is described that illustrates the application of FEBio to a research problem in biomechanics. Together with the pre- and postprocessing software PREVIEW and POSTVIEW, FEBio provides a tailored solution for research and development in computational biomechanics.

Effects of Repeated Reading and Listening Passage Preview on Oral Reading Fluency

ERIC Educational Resources Information Center

Swain, Kristine D.; Leader-Janssen, Elizabeth M.; Conley, Perry

2017-01-01

This case study examined the effectiveness of three fluency interventions (i.e., repeated reading, audio listening passage preview and teacher modeled listening passage preview) with a fifth grade student struggling with fluency skills. When compared to baseline, each intervention increased oral reading fluency by the end of the 7 weeks of…

How To Read Faster. Power of the Printed Word.

ERIC Educational Resources Information Center

Cosby, Bill

Three practical ways to get the meaning from printed words quickly and efficiently are: (1) previewing; (2) skimming; and (3) clustering. Previewing and skimming are ways of getting through a lot of reading material without reading every word. Previewing is especially helpful for heavy reading like long articles, business reports, and nonfiction…

Parafoveal preview benefit in reading is only obtained from the saccade goal.

PubMed

McDonald, Scott A

2006-12-01

Previous research has demonstrated that reading is less efficient when parafoveal visual information about upcoming words is invalid or unavailable; the benefit from a valid preview is realised as reduced reading times on the subsequently foveated word, and has been explained with reference to the allocation of attentional resources to parafoveal word(s). This paper presents eyetracking evidence that preview benefit is obtained only for words that are selected as the saccade target. Using a gaze-contingent display change paradigm (Rayner, K. (1975). The perceptual span and peripheral cues in reading. Cognitive Psychology, 7, 65-81), the position of the triggering boundary was set near the middle of the pretarget word. When a refixation saccade took the eye across the boundary in the pretarget word, there was no reliable effect of the validity of the target word preview. However, when the triggering boundary was positioned just after the pretarget word, a robust preview benefit was observed, replicating previous research. The current results complement findings from studies of basic visual function, suggesting that for the case of preview benefit in reading, attentional and oculomotor processes are obligatorily coupled.

-The Influence of Scene Context on Parafoveal Processing of Objects.

PubMed

Castelhano, Monica S; Pereira, Effie J

2017-04-21

Many studies in reading have shown the enhancing effect of context on the processing of a word before it is directly fixated (parafoveal processing of words; Balota et al., 1985; Balota & Rayner, 1983; Ehrlich & Rayner, 1981). Here, we examined whether scene context influences the parafoveal processing of objects and enhances the extraction of object information. Using a modified boundary paradigm (Rayner, 1975), the Dot-Boundary paradigm, participants fixated on a suddenly-onsetting cue before the preview object would onset 4° away. The preview object could be identical to the target, visually similar, visually dissimilar, or a control (black rectangle). The preview changed to the target object once a saccade toward the object was made. Critically, the objects were presented on either a consistent or an inconsistent scene background. Results revealed that there was a greater processing benefit for consistent than inconsistent scene backgrounds and that identical and visually similar previews produced greater processing benefits than other previews. In the second experiment, we added an additional context condition in which the target location was inconsistent, but the scene semantics remained consistent. We found that changing the location of the target object disrupted the processing benefit derived from the consistent context. Most importantly, across both experiments, the effect of preview was not enhanced by scene context. Thus, preview information and scene context appear to independently boost the parafoveal processing of objects without any interaction from object-scene congruency.

Visual Working Memory Supports the Inhibition of Previously Processed Information: Evidence from Preview Search

ERIC Educational Resources Information Center

Al-Aidroos, Naseem; Emrich, Stephen M.; Ferber, Susanne; Pratt, Jay

2012-01-01

In four experiments we assessed whether visual working memory (VWM) maintains a record of previously processed visual information, allowing old information to be inhibited, and new information to be prioritized. Specifically, we evaluated whether VWM contributes to the inhibition (i.e., visual marking) of previewed distractors in a preview search.…

ChemPreview: an augmented reality-based molecular interface.

PubMed

Zheng, Min; Waller, Mark P

2017-05-01

Human computer interfaces make computational science more comprehensible and impactful. Complex 3D structures such as proteins or DNA are magnified by digital representations and displayed on two-dimensional monitors. Augmented reality has recently opened another door to access the virtual three-dimensional world. Herein, we present an augmented reality application called ChemPreview with the potential to manipulate bio-molecular structures at an atomistic level. ChemPreview is available at https://github.com/wallerlab/chem-preview/releases, and is built on top of the Meta 1 platform https://www.metavision.com/. ChemPreview can be used to interact with a protein in an intuitive way using natural hand gestures, thereby making it appealing to computational chemists or structural biologists. The ability to manipulate atoms in real world could eventually provide new and more efficient ways of extracting structural knowledge, or designing new molecules in silico. Copyright © 2017 Elsevier Inc. All rights reserved.

The Effects of Item Preview on Video-Based Multiple-Choice Listening Assessments

ERIC Educational Resources Information Center

Koyama, Dennis; Sun, Angela; Ockey, Gary J.

2016-01-01

Multiple-choice formats remain a popular design for assessing listening comprehension, yet no consensus has been reached on how multiple-choice formats should be employed. Some researchers argue that test takers must be provided with a preview of the items prior to the input (Buck, 1995; Sherman, 1997); others argue that a preview may decrease the…

Parafoveal processing during reading is reduced across a morphological boundary

PubMed Central

Drieghe, Denis; Pollatsek, Alexander; Juhasz, Barbara J.; Rayner, Keith

2010-01-01

A boundary change manipulation was implemented within a monomorphemic word (e.g., fountaom as a preview for fountain), where parallel processing should occur given adequate visual acuity, and within an unspaced compound (bathroan as a preview for bathroom), where some serial processing of the constituents is likely. Consistent with that hypothesis, there was no effect of the preview manipulation on fixation time on the 1st constituent of the compound, whereas there was on the corresponding letters of the monomorphemic word. There was also a larger preview disruption on gaze duration on the whole monomorphemic word than on the compound, suggesting more parallel processing within monomorphemic words. PMID:20409538

Parafoveal processing in silent and oral reading: Reading mode influences the relative weighting of phonological and semantic information in Chinese.

PubMed

Pan, Jinger; Laubrock, Jochen; Yan, Ming

2016-08-01

We examined how reading mode (i.e., silent vs. oral reading) influences parafoveal semantic and phonological processing during the reading of Chinese sentences, using the gaze-contingent boundary paradigm. In silent reading, we found in 2 experiments that reading times on target words were shortened with semantic previews in early and late processing, whereas phonological preview effects mainly occurred in gaze duration or second-pass reading. In contrast, results showed that phonological preview information is obtained early on in oral reading. Strikingly, in oral reading, we observed a semantic preview cost on the target word in Experiment 1 and a decrease in the effect size of preview benefit from first- to second-pass measures in Experiment 2, which we hypothesize to result from increased preview duration. Taken together, our results indicate that parafoveal semantic information can be obtained irrespective of reading mode, whereas readers more efficiently process parafoveal phonological information in oral reading. We discuss implications for notions of information processing priority and saccade generation during silent and oral reading. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

The effect of contextual constraint on parafoveal processing in reading

PubMed Central

Schotter, Elizabeth R.; Lee, Michelle; Reiderman, Michael; Rayner, Keith

2015-01-01

Semantic preview benefit in reading is an elusive and controversial effect because empirical studies do not always (but sometimes) find evidence for it. Its presence seems to depend on (at least) the language being read, visual properties of the text (e.g., initial letter capitalization), the type of relationship between preview and target, and as shown here, semantic constraint generated by the prior sentence context. Schotter (2013) reported semantic preview benefit for synonyms, but not semantic associates when the preview/target was embedded in a neutral sentence context. In Experiment 1, we embedded those same previews/targets into constrained sentence contexts and in Experiment 2 we replicated the effects reported by Schotter (2013; in neutral sentence contexts) and Experiment 1 (in constrained contexts) in a within-subjects design. In both experiments, we found an early (i.e., first-pass) apparent preview benefit for semantically associated previews in constrained contexts that went away in late measures (e.g., total time). These data suggest that sentence constraint (at least as manipulated in the current study) does not operate by making a single word form expected, but rather generates expectations about what kinds of words are likely to appear. Furthermore, these data are compatible with the assumption of the E-Z Reader model that early oculomotor decisions reflect “hedged bets” that a word will be identifiable and, when wrong, lead the system to identify the wrong word, triggering regressions. PMID:26257469

Assessment Environment for Complex Systems Software Guide

NASA Technical Reports Server (NTRS)

2013-01-01

This Software Guide (SG) describes the software developed to test the Assessment Environment for Complex Systems (AECS) by the West Virginia High Technology Consortium (WVHTC) Foundation's Mission Systems Group (MSG) for the National Aeronautics and Space Administration (NASA) Aeronautics Research Mission Directorate (ARMD). This software is referred to as the AECS Test Project throughout the remainder of this document. AECS provides a framework for developing, simulating, testing, and analyzing modern avionics systems within an Integrated Modular Avionics (IMA) architecture. The purpose of the AECS Test Project is twofold. First, it provides a means to test the AECS hardware and system developed by MSG. Second, it provides an example project upon which future AECS research may be based. This Software Guide fully describes building, installing, and executing the AECS Test Project as well as its architecture and design. The design of the AECS hardware is described in the AECS Hardware Guide. Instructions on how to configure, build and use the AECS are described in the User's Guide. Sample AECS software, developed by the WVHTC Foundation, is presented in the AECS Software Guide. The AECS Hardware Guide, AECS User's Guide, and AECS Software Guide are authored by MSG. The requirements set forth for AECS are presented in the Statement of Work for the Assessment Environment for Complex Systems authored by NASA Dryden Flight Research Center (DFRC). The intended audience for this document includes software engineers, hardware engineers, project managers, and quality assurance personnel from WVHTC Foundation (the suppliers of the software), NASA (the customer), and future researchers (users of the software). Readers are assumed to have general knowledge in the field of real-time, embedded computer software development.

Fast Color Grouping and Slow Color Inhibition: Evidence for Distinct Temporal Windows for Separate Processes in Preview Search

ERIC Educational Resources Information Center

Braithwaite, Jason J.; Humphreys, Glyn W.; Hulleman, Johan; Watson, Derrick G.

2007-01-01

The authors report 4 experiments that examined color grouping and negative carryover effects in preview search via a probe detection task (J. J. Braithwaite, G. W. Humphreys, & J. Hodsoll, 2003). In Experiment 1, there was evidence of a negative color carryover from the preview to new items, using both search and probe detection measures. There…

Cross-language parafoveal semantic processing: Evidence from Korean-Chinese bilinguals.

PubMed

Wang, Aiping; Yeon, Junmo; Zhou, Wei; Shu, Hua; Yan, Ming

2016-02-01

In the present study, we aimed at testing cross-language cognate and semantic preview effects. We tested how native Korean readers who learned Chinese as a second language make use of the parafoveal information during the reading of Chinese sentences. There were 3 types of Korean preview words: cognate translations of the Chinese target words, semantically related noncognate words, and unrelated words. Together with a highly significant cognate preview effect, more critically, we also observed reliable facilitation in processing of the target word from the semantically related previews in all fixation measures. Results from the present study provide first evidence for semantic processing from parafoveally presented Korean words and for cross-language parafoveal semantic processing.

Too little or too much? Parafoveal preview benefits and parafoveal load costs in dyslexic adults.

PubMed

Silva, Susana; Faísca, Luís; Araújo, Susana; Casaca, Luis; Carvalho, Loide; Petersson, Karl Magnus; Reis, Alexandra

2016-07-01

Two different forms of parafoveal dysfunction have been hypothesized as core deficits of dyslexic individuals: reduced parafoveal preview benefits ("too little parafovea") and increased costs of parafoveal load ("too much parafovea"). We tested both hypotheses in a single eye-tracking experiment using a modified serial rapid automatized naming (RAN) task. Comparisons between dyslexic and non-dyslexic adults showed reduced parafoveal preview benefits in dyslexics, without increased costs of parafoveal load. Reduced parafoveal preview benefits were observed in a naming task, but not in a silent letter-finding task, indicating that the parafoveal dysfunction may be consequent to the overload with extracting phonological information from orthographic input. Our results suggest that dyslexics' parafoveal dysfunction is not based on strict visuo-attentional factors, but nevertheless they stress the importance of extra-phonological processing. Furthermore, evidence of reduced parafoveal preview benefits in dyslexia may help understand why serial RAN is an important reading predictor in adulthood.

Third and fifth graders' processing of parafoveal information in reading: A study in single-word recognition.

PubMed

Khelifi, Rachid; Sparrow, Laurent; Casalis, Séverine

2015-11-01

We assessed third and fifth graders' processing of parafoveal word information using a lexical decision task. On each trial, a preview word was first briefly presented parafoveally in the left or right visual field before a target word was displayed. Preview and target words could be identical, share the first three letters, or have no letters in common. Experiment 1 showed that developing readers receive the same word recognition benefit from parafoveal previews as expert readers. The impact of a change of case between preview and target in Experiment 2 showed that in all groups of readers, the preview benefit resulted from the identification of letters at an abstract level rather than from facilitation at a purely visual level. Fifth graders identified more letters from the preview than third graders. The results are interpreted within the framework of the interactive activation model. In particular, we suggest that although the processing of parafoveal information led to letter identification in developing readers, the processes involved may differ from those in expert readers. Although expert readers' processing of parafoveal information led to activation at the level of lexical representations, no such activation was observed in developing readers. Copyright © 2015 Elsevier Inc. All rights reserved.

Is orthographic information from multiple parafoveal words processed in parallel: An eye-tracking study.

PubMed

Cutter, Michael G; Drieghe, Denis; Liversedge, Simon P

2017-08-01

In the current study we investigated whether orthographic information available from 1 upcoming parafoveal word influences the processing of another parafoveal word. Across 2 experiments we used the boundary paradigm (Rayner, 1975) to present participants with an identity preview of the 2 words after the boundary (e.g., hot pan ), a preview in which 2 letters were transposed between these words (e.g., hop tan ), or a preview in which the same 2 letters were substituted (e.g., hob fan ). We hypothesized that if these 2 words were processed in parallel in the parafovea then we may observe significant preview benefits for the condition in which the letters were transposed between words relative to the condition in which the letters were substituted. However, no such effect was observed, with participants fixating the words for the same amount of time in both conditions. This was the case both when the transposition was made between the final and first letter of the 2 words (e.g., hop tan as a preview of hot pan ; Experiment 1) and when the transposition maintained within word letter position (e.g., pit hop as a preview of hit pop ; Experiment 2). The implications of these findings are considered in relation to serial and parallel lexical processing during reading. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Processing the in the parafovea: are articles skipped automatically?

PubMed

Angele, Bernhard; Rayner, Keith

2013-03-01

One of the words that readers of English skip most often is the definite article the. Most accounts of reading assume that in order for a reader to skip a word, it must have received some lexical processing. The definite article is skipped so regularly, however, that the oculomotor system might have learned to skip the letter string t-h-e automatically. We tested whether skipping of articles in English is sensitive to context information or whether it is truly automatic in the sense that any occurrence of the letter string the will trigger a skip. This was done using the gaze-contingent boundary paradigm (Rayner, 1975) to provide readers with false parafoveal previews of the article the. All experimental sentences contained a short target verb, the preview of which could be correct (i.e., identical to the actual subsequent word in the sentence; e.g., ace), a nonword (tda), or an infelicitous article preview (the). Our results indicated that readers tended to skip the infelicitous the previews frequently, suggesting that, in many cases, they seemed to be unable to detect the syntactic anomaly in the preview and based their skipping decision solely on the orthographic properties of the article. However, there was some evidence that readers sometimes detected the anomaly, as they also showed increased skipping of the pretarget word in the the preview condition. (c) 2013 APA, all rights reserved.

Distinct subsystems for the parafoveal processing of spatial and linguistic information during eye fixations in reading.

PubMed

Inhoff, Albrecht W; Radach, Ralph; Eiter, Brianna M; Juhasz, Barbara

2003-07-01

Two experiments examined readers' use of parafoveally obtained word length information for word recognition. Both experiments manipulated the length (number of constituent characters) of a parafoveally previewed target word so that it was either accurately or inaccurately specified. In Experiment 1, previews also either revealed or denied useful orthographic information. In Experiment 2, parafoveal targets were either high- or low-frequency words. Eye movement contingent display changes were used to show the intact target upon its fixation. Examination of target viewing duration showed completely additive effects of word length previews and of ortho-graphic previews in Experiment 1, viewing duration being shorter in the accurate-length and the orthographic preview conditions. Experiment 2 showed completely additive effects of word length and word frequency, target viewing being shorter in the accurate-length and the high-frequency conditions. Together these results indicate that functionally distinct subsystems control the use of parafoveally visible spatial and linguistic information in reading. Parafoveally visible spatial information appears to be used for two distinct extralinguistic computations: visual object selection and saccade specification.

Words, shape, visual search and visual working memory in 3-year-old children.

PubMed

Vales, Catarina; Smith, Linda B

2015-01-01

Do words cue children's visual attention, and if so, what are the relevant mechanisms? Across four experiments, 3-year-old children (N = 163) were tested in visual search tasks in which targets were cued with only a visual preview versus a visual preview and a spoken name. The experiments were designed to determine whether labels facilitated search times and to examine one route through which labels could have their effect: By influencing the visual working memory representation of the target. The targets and distractors were pictures of instances of basic-level known categories and the labels were the common name for the target category. We predicted that the label would enhance the visual working memory representation of the target object, guiding attention to objects that better matched the target representation. Experiments 1 and 2 used conjunctive search tasks, and Experiment 3 varied shape discriminability between targets and distractors. Experiment 4 compared the effects of labels to repeated presentations of the visual target, which should also influence the working memory representation of the target. The overall pattern fits contemporary theories of how the contents of visual working memory interact with visual search and attention, and shows that even in very young children heard words affect the processing of visual information. © 2014 John Wiley & Sons Ltd.

Microcomputers: Software Evaluation. Evaluation Guides. Guide Number 17.

ERIC Educational Resources Information Center

Gray, Peter J.

This guide discusses three critical steps in selecting microcomputer software and hardware: setting the context, software evaluation, and managing microcomputer use. Specific topics addressed include: (1) conducting an informal task analysis to determine how the potential user's time is spent; (2) identifying tasks amenable to computerization and…

Destination Mars Grand Opening

NASA Image and Video Library

2016-09-18

Apollo 11 astronaut Buzz Aldrin, left and Erisa Hines of NASA’s Jet Propulsion Laboratory (JPL) in Pasadena, California, try out Microsoft HoloLens mixed reality headset during a preview of the new Destination: Mars experience at the Kennedy Space Center Visitor Complex. Destination: Mars gives guests an opportunity to “visit” several sites on Mars using real imagery from NASA’s Curiosity Mars Rover. Based on OnSight, a tool created by NASA’s Jet Propulsion Laboratory in Pasadena, California, the experience brings guests together with a holographic version of Aldrin and Curiosity rover driver Hines as they are guided to Mars using Microsoft HoloLens mixed reality headset. Photo credit: NASA/Charles Babir

High/Scope Buyer's Guide to Children's Software. 11th Edition.

ERIC Educational Resources Information Center

Hohmann, Charles; And Others

This 11th edition of the High/Scope Buyer's Guide to Children's Software was designed to help teachers, caregivers, and parents make good choices when purchasing software to enhance children's learning. The book consists of an introduction, a chapter on finding the best software, software reviews for 48 different software products. The…

Health software: a new CEI Guide for software management in medical environment.

PubMed

Giacomozzi, Claudia; Martelli, Francesco

2016-01-01

The increasing spread of software components in the healthcare context renders explanatory guides relevant and mandatory to interpret laws and standards, and to support safe management of software products in healthcare. In 2012 a working group has been settled for the above purposes at Italian Electrotechnical Committee (CEI), made of experts from Italian National Institute of Health (ISS), representatives of industry, and representatives of the healthcare organizations. As a first outcome of the group activity, Guide CEI 62-237 was published in February 2015. The Guide incorporates an innovative approach based on the proper contextualization of software products, either medical devices or not, to the specific healthcare scenario, and addresses the risk management of IT systems. The Guide provides operators and manufacturers with an interpretative support with many detailed examples to facilitate the proper contextualization and management of health software, in compliance with related European and international regulations and standards.

Visuospatial working memory mediates inhibitory and facilitatory guidance in preview search.

PubMed

Barrett, Doug J K; Shimozaki, Steven S; Jensen, Silke; Zobay, Oliver

2016-10-01

Visual search is faster and more accurate when a subset of distractors is presented before the display containing the target. This "preview benefit" has been attributed to separate inhibitory and facilitatory guidance mechanisms during search. In the preview task the temporal cues thought to elicit inhibition and facilitation provide complementary sources of information about the likely location of the target. In this study, we use a Bayesian observer model to compare sensitivity when the temporal cues eliciting inhibition and facilitation produce complementary, and competing, sources of information. Observers searched for T-shaped targets among L-shaped distractors in 2 standard and 2 preview conditions. In the standard conditions, all the objects in the display appeared at the same time. In the preview conditions, the initial subset of distractors either stayed on the screen or disappeared before the onset of the search display, which contained the target when present. In the latter, the synchronous onset of old and new objects negates the predictive utility of stimulus-driven capture during search. The results indicate observers combine memory-driven inhibition and sensory-driven capture to reduce spatial uncertainty about the target's likely location during search. In the absence of spatially predictive onsets, memory-driven inhibition at old locations persists despite irrelevant sensory change at previewed locations. This result is consistent with a bias toward unattended objects during search via the active suppression of irrelevant capture at previously attended locations. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Software Engineering Laboratory (SEL) data base reporting software user's guide and system description. Volume 1: Introduction and user's guide

NASA Technical Reports Server (NTRS)

1983-01-01

Reporting software programs provide formatted listings and summary reports of the Software Engineering Laboratory (SEL) data base contents. The operating procedures and system information for 18 different reporting software programs are described. Sample output reports from each program are provided.

Exploration Guides as a Strategy to Improve the Effectiveness of Educational Software in Chemistry

ERIC Educational Resources Information Center

Paiva, Joao Carlos; da Costa, Luiza Alves

2010-01-01

Guiding students while they explore educational software is important in order to convey the pedagogical pragmatism that many programs seem to lack. This article points out some characteristics that we believe educational software exploration guides must contain for students to benefit from using these programs. The supporting information includes…

Design of an optimal preview controller for linear discrete-time descriptor systems with state delay

NASA Astrophysics Data System (ADS)

Cao, Mengjuan; Liao, Fucheng

2015-04-01

In this paper, the linear discrete-time descriptor system with state delay is studied, and a design method for an optimal preview controller is proposed. First, by using the discrete lifting technique, the original system is transformed into a general descriptor system without state delay in form. Then, taking advantage of the first-order forward difference operator, we construct a descriptor augmented error system, including the state vectors of the lifted system, error vectors, and desired target signals. Rigorous mathematical proofs are given for the regularity, stabilisability, causal controllability, and causal observability of the descriptor augmented error system. Based on these, the optimal preview controller with preview feedforward compensation for the original system is obtained by using the standard optimal regulator theory of the descriptor system. The effectiveness of the proposed method is shown by numerical simulation.

Demonstration of the Low-Cost Virtual Collaborative Environment (VCE)

NASA Technical Reports Server (NTRS)

Bowers, David; Montes, Leticia; Ramos, Angel; Joyce, Brendan; Lumia, Ron

1997-01-01

This paper demonstrates the feasibility of a low-cost approach of remotely controlling equipment. Our demonstration system consists of a PC, the PUMA 560 robot with Barrett hand, and commercially available controller and teleconferencing software. The system provides a graphical user interface which allows a user to program equipment tasks and preview motions i.e., simulate the results. Once satisfied that the actions are both safe and accomplish the task, the remote user sends the data over the Internet to the local site for execution on the real equipment. A video link provides visual feedback to the remote sight. This technology lends itself readily to NASA's upcoming Mars expeditions by providing remote simulation and control of equipment.

Preview information in cab displays for high-speed locomotives.

DOT National Transportation Integrated Search

2005-07-31

This research examined the usefulness of preview information in the control of high-speed trains. Experiments were run on a human-in-the-loop locomotive simulator. The primary goal was to examine whether the proposed information-aiding displays impro...

Preview information in cab displays for high-speed locomotives

DOT National Transportation Integrated Search

2005-07-01

This research examined the usefulness of preview information in the control of high-speed trains. Experiments were run on a : human-in-the-loop locomotive simulator. The primary goal was to examine whether the proposed information-aiding displays : i...

Cat and mouse search: the influence of scene and object analysis on eye movements when targets change locations during search.

PubMed

Hillstrom, Anne P; Segabinazi, Joice D; Godwin, Hayward J; Liversedge, Simon P; Benson, Valerie

2017-02-19

We explored the influence of early scene analysis and visible object characteristics on eye movements when searching for objects in photographs of scenes. On each trial, participants were shown sequentially either a scene preview or a uniform grey screen (250 ms), a visual mask, the name of the target and the scene, now including the target at a likely location. During the participant's first saccade during search, the target location was changed to: (i) a different likely location, (ii) an unlikely but possible location or (iii) a very implausible location. The results showed that the first saccade landed more often on the likely location in which the target re-appeared than on unlikely or implausible locations, and overall the first saccade landed nearer the first target location with a preview than without. Hence, rapid scene analysis influenced initial eye movement planning, but availability of the target rapidly modified that plan. After the target moved, it was found more quickly when it appeared in a likely location than when it appeared in an unlikely or implausible location. The findings show that both scene gist and object properties are extracted rapidly, and are used in conjunction to guide saccadic eye movements during visual search.This article is part of the themed issue 'Auditory and visual scene analysis'. © 2017 The Author(s).

A Preview of Coming Attractions: Classroom Teacher's Idea Notebook.

ERIC Educational Resources Information Center

Morin, Joy Ann

1995-01-01

Contends that it is important for students to be motivated and well prepared for class units and activities. Describes a "previews of coming attractions" instructional strategy that uses advance organizers to increase information processing efficiency. Includes a sample unit outline illustrating this approach. (CFR)

Optimal preview control for a linear continuous-time stochastic control system in finite-time horizon

NASA Astrophysics Data System (ADS)

Wu, Jiang; Liao, Fucheng; Tomizuka, Masayoshi

2017-01-01

This paper discusses the design of the optimal preview controller for a linear continuous-time stochastic control system in finite-time horizon, using the method of augmented error system. First, an assistant system is introduced for state shifting. Then, in order to overcome the difficulty of the state equation of the stochastic control system being unable to be differentiated because of Brownian motion, the integrator is introduced. Thus, the augmented error system which contains the integrator vector, control input, reference signal, error vector and state of the system is reconstructed. This leads to the tracking problem of the optimal preview control of the linear stochastic control system being transformed into the optimal output tracking problem of the augmented error system. With the method of dynamic programming in the theory of stochastic control, the optimal controller with previewable signals of the augmented error system being equal to the controller of the original system is obtained. Finally, numerical simulations show the effectiveness of the controller.

The influence of visual contrast and case changes on parafoveal preview benefits during reading.

PubMed

Wang, Chin-An; Inhoff, Albrecht W

2010-04-01

Reingold and Rayner (2006) showed that the visual contrast of a fixated target word influenced its viewing duration, but not the viewing of the next (posttarget) word in the text that was shown in regular contrast. Configurational target changes, by contrast, influenced target and posttarget viewing. The current study examined whether this effect pattern can be attributed to differential processing of the posttarget word during target viewing. A boundary paradigm (Rayner, 1975) was used to provide an informative or uninformative posttarget preview and to reveal the word when it was fixated. Consistent with the earlier study, more time was spent viewing the target when its visual contrast was low and its configuration unfamiliar. Critically, target contrast had no effect on the acquisition of useful information from a posttarget preview, but an unfamiliar target configuration diminished the usefulness of an informative posttarget preview. These findings are consistent with Reingold and Rayner's (2006) claim that saccade programming and attention shifting during reading can be controlled by functionally distinct word recognition processes.

NCEP BUFRLIB Software User Guide

Science.gov Websites

Integration Branch > Decoders > BUFRLIB BUFRLIB Software User Guide This document set describes how to use the NCEP BUFRLIB software to encode or decode BUFR messages. It is not intended to be a primer on background knowledge of the basic concepts of BUFR and will focus solely on how to use the BUFRLIB software

Sneak Preview of Berkeley Lab's Science at the Theatre on June 6th, 2011

ScienceCinema

Sanii, Babak

2017-12-11

Babak Sanii provides a sneak preview of Berkeley Lab's next Science at the Theater Event: Big Thinking: The Power of Nanoscience. Berkeley Lab scientists reveal how nanoscience will bring us cleaner energy, faster computers, and improved medicine. Berkeley Repertory Theatre on June 6th, 2011.

Examining Listening Previewing as a Classwide Strategy to Promote Reading Comprehension and Vocabulary

ERIC Educational Resources Information Center

Hawkins, Renee O.; Musti-Rao, Shobana; Hale, Andrea D.; McGuire, Shannon; Hailley, Jennifer

2010-01-01

Classwide instructional strategies to improve not only reading fluency but also comprehension and vocabulary knowledge are essential for student reading success. The current study examined the immediate effects of two classwide listening previewing strategies on reading comprehension and vocabulary knowledge. Twenty-one, fourth-grade general…

Sneak Preview of Berkeley Lab's Science at the Theatre on June 6th, 2011

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanii, Babak

Babak Sanii provides a sneak preview of Berkeley Lab's next Science at the Theater Event: Big Thinking: The Power of Nanoscience. Berkeley Lab scientists reveal how nanoscience will bring us cleaner energy, faster computers, and improved medicine. Berkeley Repertory Theatre on June 6th, 2011.

Space Station Spacewalks Previewed

NASA Image and Video Library

2018-01-18

On Jan. 18, a briefing was held at NASA’s Johnson Space Center to preview a pair of spacewalks scheduled to take place outside the International Space Station. American and Japanese astronauts aboard the station will conduct spacewalks on Tuesday, Jan. 23 and Monday, Jan. 29 to service the station’s robotic arm.

Semantic Preview Benefit during Reading

ERIC Educational Resources Information Center

Hohenstein, Sven; Kliegl, Reinhold

2014-01-01

Word features in parafoveal vision influence eye movements during reading. The question of whether readers extract semantic information from parafoveal words was studied in 3 experiments by using a gaze-contingent display change technique. Subjects read German sentences containing 1 of several preview words that were replaced by a target word…

Executive Guide to Software Maintenance. Reports on Computer Science and Technology.

ERIC Educational Resources Information Center

Osborne, Wilma M.

This guide is designed for federal executives and managers who have a responsibility for the planning and management of software projects and for federal staff members who are affected by, or involved in, making software changes, and who need to be aware of steps that can reduce both the difficulty and cost of software maintenance. Organized in a…

Optical and Event-Duration Variables Affecting Self-Motion Perception.

DTIC Science & Technology

1985-11-01

0000 SZKO 6 .511 .16 2.22 .0467 GK 2 .463 .14 6.19 .0029 ZFK 4 .468 .14 2.66 .0336 Total 5939 328.401 100.00 - - Note. Each effect was tested using...0 . 322 1.322 2.322 3.322 4.322 5.322 LOG 2 PREVIEW PERIOD (s) (0) (1.25) (2.50) (5.0) (10.0) (20.0) (40.0) PREVIEW PERIOD (s) Figure 19. Percent...DECELERATING 6-.- - z 0 w1) 3 0 z F0 I, I I I 1 I 0 . 322 1 . 322 2.322 3.322 4.: 322 5.322 LOG2 PREVIEW PERIOD (s) ~(0) (1.25) (2.50) (5.0) (10.0) (20.0) (40.0

Selective Guide to Literature on Software Review Sources. Engineering Literature Guides, Number 8.

ERIC Educational Resources Information Center

Bean, Margaret H., Ed.

This selective literature guide serves as a directory to software evaluation sources for all sizes of microcomputers. Information is provided on review sources and guides which deal with a variety of applications such as library, engineering, school, and business as well as a variety of systems, including DOS and CP/M. This document is intended to…

Object Substitution Masking: When Does Mask Preview Work?

ERIC Educational Resources Information Center

Lim, Stephen Wee Hun; Chua, Fook K.

2008-01-01

When a target is enclosed by a 4-dot mask that persists after the target disappears, target identification is worse than it is when the mask terminates with the target. This masking effect is attributed to object substitution masking (OSM). Previewing the mask, however, attenuates OSM. This study investigated specific conditions under which mask…

Research Previews: November 1974, Volume 21, Number 2.

ERIC Educational Resources Information Center

Scofield, Norma C., Ed.

This research report contains previews of research projects on four unrelated social science topics. The first research project, Personality Traits of Nixon and Ford as Seen by Political Science Students, sampled students at North Carolina University. The results indicated that Nixon was viewed as a rather negative person who is at odds with…

Journals Not Included in BIOSIS Previews Have a Notable Impact in Biology

ERIC Educational Resources Information Center

Lascar, Claudia; Barnett, Philip

2009-01-01

The purpose of this study was to reveal influential journals used by life scientists; journals not currently included in "BIOSIS Previews," but included in either "PubMed" or "Science Citation Index Expanded". These 252 journals were revealed by the Eigenfactor, an iterative ranking scheme which quantitatively measures the scientific influence of…

Parafoveal Preprocessing in Reading Revisited: Evidence from a Novel Preview Manipulation

ERIC Educational Resources Information Center

Gagl, Benjamin; Hawelka, Stefan; Richlan, Fabio; Schuster, Sarah; Hutzler, Florian

2014-01-01

The study investigated parafoveal preprocessing by the means of the classical invisible boundary paradigm and a novel manipulation of the parafoveal previews (i.e., visual degradation). Eye movements were investigated on 5-letter target words with constraining (i.e., highly informative) initial letters or similarly constraining final letters.…

PREVIEW: Computer Assistance for Visual Management of Forested Landscapes

Treesearch

Erik Myklestad; J. Alan Wagar

1976-01-01

The PREVIEW computer program facilitates visual management of forested landscapes by generating perspective drawings that show proposed timber harvesting and regrowth throughout a rotation. Drawings show how changes would appear from selected viewing points and show landscapes as either a grid of distorted squares or by symbols representing trees, clearings, water,...

Use of Phonological Codes for Chinese Characters: Evidence from Processing of Parafoveal Preview when Reading Sentences

ERIC Educational Resources Information Center

Tsai, Jie-Li; Lee, Chia-Ying; Tzeng, Ovid J. L.; Hung, Daisy L.; Yen, Nai-Shing

2004-01-01

The role of phonological coding for character identification was examined with the benefit of processing parafoveal characters in eye fixations while reading Chinese sentences. In Experiment 1, the orthogonal manipulation of phonological and orthographic similarity can separate two types of phonological benefits for homophonic previews, according…

Realistic Major Previews in the School-to-College Transition of Italian High School Students

ERIC Educational Resources Information Center

Lent, Robert W.; Nota, Laura; Soresi, Salvatore; Ferrari, Lea

2007-01-01

Industrial/organizational researchers have reported that realistic job previews diminish prospective workers' expectations but promote the satisfaction and persistence of those who ultimately accept a job assignment. The authors applied this strategy to the context of school-to-college transition; 354 Italian high school students were provided…

Too Little or Too Much? Parafoveal Preview Benefits and Parafoveal Load Costs in Dyslexic Adults

ERIC Educational Resources Information Center

Silva, Susana; Faísca, Luís; Araújo, Susana; Casaca, Luis; Carvalho, Loide; Petersson, Karl Magnus; Reis, Alexandra

2016-01-01

Two different forms of parafoveal dysfunction have been hypothesized as core deficits of dyslexic individuals: reduced parafoveal preview benefits ("too little parafovea") and increased costs of parafoveal load ("too much parafovea"). We tested both hypotheses in a single eye-tracking experiment using a modified serial rapid…

Preliminary Humanities Tech Scout Report [and] Scouting for Multimedia, the Search Goes On.

ERIC Educational Resources Information Center

Muyskens, Lois

In 1990, the Dallas County Community College District's (DCCCD's) Computer Center recruited three technology scouts (faculty members interested in media) to locate, preview, and evaluate multimedia products that could be used in the classroom. The technology scout for the humanities found and previewed products that could be used in…

Teacher's Guide to SERAPHIM Software I. Chemistry: Experimental Foundations.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the first in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemistry: Experimental Foundations." Program suggestions are…

Teacher's Guide to SERAPHIM Software II. Chemical Principles.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the second in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemical Principles." Program suggestions are arranged in the…

Microcomputer Software Technician Curriculum.

ERIC Educational Resources Information Center

EASTCONN Regional Educational Services Center, North Windham, CT.

This curriculum guide, developed for high schools in Connecticut, outlines a 4-year program for training microcomputer software technicians. Following a list of nine general objectives of the program, the guide provides a list of competencies that students are expected to develop in each of the courses of the 4-year program. The guide then…

Real-time fluoroscopic needle guidance in the interventional radiology suite using navigational software for percutaneous bone biopsies in children.

PubMed

Shellikeri, Sphoorti; Setser, Randolph M; Hwang, Tiffany J; Srinivasan, Abhay; Krishnamurthy, Ganesh; Vatsky, Seth; Girard, Erin; Zhu, Xiaowei; Keller, Marc S; Cahill, Anne Marie

2017-07-01

Navigational software provides real-time fluoroscopic needle guidance for percutaneous procedures in the Interventional Radiology (IR) suite. We describe our experience with navigational software for pediatric percutaneous bone biopsies in the IR suite and compare technical success, diagnostic accuracy, radiation dose and procedure time with that of CT-guided biopsies. Pediatric bone biopsies performed using navigational software (Syngo iGuide, Siemens Healthcare) from 2011 to 2016 were prospectively included and anatomically matched CT-guided bone biopsies from 2008 to 2016 were retrospectively reviewed with institutional review board approval. C-arm CT protocols used for navigational software-assisted cases included institution-developed low-dose (0.1/0.17 μGy/projection), regular-dose (0.36 μGy/projection), or a combination of low-dose/regular-dose protocols. Estimated effective radiation dose and procedure times were compared between software-assisted and CT-guided biopsies. Twenty-six patients (15 male; mean age: 10 years) underwent software-assisted biopsies (15 pelvic, 7 lumbar and 4 lower extremity) and 33 patients (13 male; mean age: 9 years) underwent CT-guided biopsies (22 pelvic, 7 lumbar and 4 lower extremity). Both modality biopsies resulted in a 100% technical success rate. Twenty-five of 26 (96%) software-assisted and 29/33 (88%) CT-guided biopsies were diagnostic. Overall, the effective radiation dose was significantly lower in software-assisted than CT-guided cases (3.0±3.4 vs. 6.6±7.7 mSv, P=0.02). The effective dose difference was most dramatic in software-assisted cases using low-dose C-arm CT (1.2±1.8 vs. 6.6±7.7 mSv, P=0.001) or combined low-dose/regular-dose C-arm CT (1.9±2.4 vs. 6.6±7.7 mSv, P=0.04), whereas effective dose was comparable in software-assisted cases using regular-dose C-arm CT (6.0±3.5 vs. 6.6±7.7 mSv, P=0.7). Mean procedure time was significantly lower for software-assisted cases (91±54 vs. 141±68 min, P=0.005). In our experience, navigational software technology in the IR suite is a promising alternative to CT guidance for pediatric bone biopsies providing comparable technical success and diagnostic accuracy with lower radiation dose and procedure time, in addition to providing real-time fluoroscopic needle guidance.

The Profiles in Practice School Reporting Software.

ERIC Educational Resources Information Center

Griffin, Patrick

"The Profiles in Practice: School Reporting Software" provides a framework for reports on different aspects of performance in an assessment program. This booklet is the installation guide and user manual for the Profiles in Practice software, which is included as a CD-ROM. The chapters of the guide are: (1) "Installation"; (2) "Starting the…

A Guide to Street Tree Inventory Software

Treesearch

Gene A. Olig; Robert W. Miller

1997-01-01

The purpose of this publication is to serve as a reference and guide for urban forestry professionals in the selection of a street tree inventory software program. The programs described include only those that are commercially available. The increasing demand for street tree inventory software follows a trend towards a more computerized society and the increasing...

Assessing Outcomes of a Realistic Major Preview in an Introductory Sport Management Course

ERIC Educational Resources Information Center

Pierce, David; Wanless, Elizabeth; Johnson, James

2014-01-01

This paper assessed the outcomes of a field experience assignment (FEA) in an introductory sport management course designed as a realistic major preview. Student learning outcomes assessed were commitment to the major, intent to pursue the major, expectation of a career in sports, and perceived preparation for a career in sports. A…

Semantic Preview Benefit in English: Individual Differences in the Extraction and Use of Parafoveal Semantic Information

ERIC Educational Resources Information Center

Veldre, Aaron; Andrews, Sally

2016-01-01

Although there is robust evidence that skilled readers of English extract and use orthographic and phonological information from the parafovea to facilitate word identification, semantic preview benefits have been elusive. We sought to establish whether individual differences in the extraction and/or use of parafoveal semantic information could…

Transposed-Letter Effects in Reading: Evidence from Eye Movements and Parafoveal Preview

ERIC Educational Resources Information Center

Johnson, Rebecca L.; Perea, Manuel; Rayner, Keith

2007-01-01

Three eye movement experiments were conducted to examine the role of letter identity and letter position during reading. Before fixating on a target word within each sentence, readers were provided with a parafoveal preview that differed in the amount of useful letter identity and letter position information it provided. In Experiments 1 and 2,…

Realistic Job Previews: Can a Procedure to Reduce Turnover Also Influence the Relationship between Abilities and Performance?

ERIC Educational Resources Information Center

Wanous, John P.

1978-01-01

The current state of theory, research, and practice in realistic job previews (RJP) for recruitment is still immature. RJPs have been used to reduce employee turnover, but not necessarily to influence the job performance of newcomers. This research looks at the background, research results, and unanswered issues. (Author/RK)

Initial Scene Representations Facilitate Eye Movement Guidance in Visual Search

ERIC Educational Resources Information Center

Castelhano, Monica S.; Henderson, John M.

2007-01-01

What role does the initial glimpse of a scene play in subsequent eye movement guidance? In 4 experiments, a brief scene preview was followed by object search through the scene via a small moving window that was tied to fixation position. Experiment 1 demonstrated that the scene preview resulted in more efficient eye movements compared with a…

Teacher's Guide to SERAPHIM Software III. Modern Chemistry.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the third in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Modern Chemistry." Program suggestions are arranged in the same…

Teacher's Guide to SERAPHIM Software IV Chemistry: A Modern Course.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the fourth in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemistry: A Modern Course." Program suggestions are arranged…

Teacher's Guide to SERAPHIM Software VI. Chemistry: The Study of Matter.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the sixth in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemistry: The Study of Matter." Program suggestions are…

Teacher's Guide to SERAPHIM Software V. Chemistry: The Central Science.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the fifth in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemistry: The Central Science." Program suggestions are…

Automated Attitude Sensor Calibration: Progress and Plans

NASA Technical Reports Server (NTRS)

Sedlak, Joseph; Hashmall, Joseph

2004-01-01

This paper describes ongoing work a NASA/Goddard Space Flight Center to improve the quality of spacecraft attitude sensor calibration and reduce costs by automating parts of the calibration process. The new calibration software can autonomously preview data quality over a given time span, select a subset of the data for processing, perform the requested calibration, and output a report. This level of automation is currently being implemented for two specific applications: inertial reference unit (IRU) calibration and sensor alignment calibration. The IRU calibration utility makes use of a sequential version of the Davenport algorithm. This utility has been successfully tested with simulated and actual flight data. The alignment calibration is still in the early testing stage. Both utilities will be incorporated into the institutional attitude ground support system.

[Three-dimensional 3D modeling: First applications in radioanatomy and interventional radiology under CT guidance].

PubMed

Aubry, S; Pousse, A; Sarliève, P; Laborie, L; Delabrousse, E; Kastler, B

2006-11-01

To model vertebrae in 3D to improve radioanatomic knowledge of the spine with the vascular and nerve environment and simulate CT-guided interventions. Vertebra acquisitions were made with multidetector CT. We developed segmentation software and specific viewer software using the Delphi programming environment. This segmentation software makes it possible to model 3D high-resolution segments of vertebrae and their environment from multidetector CT acquisitions. Then the specific viewer software provides multiplanar reconstructions of the CT volume and the possibility to select different 3D objects of interest. This software package improves radiologists' radioanatomic knowledge through a new 3D anatomy presentation. Furthermore, the possibility of inserting virtual 3D objects in the volume can simulate CT-guided intervention. The first volumetric radioanatomic software has been born. Furthermore, it simulates CT-guided intervention and consequently has the potential to facilitate learning interventions using CT guidance.

Doing Qualitative Research Using Your Computer: A Practical Guide

ERIC Educational Resources Information Center

Hahn, Chris

2008-01-01

This book is a practical, hands-on guide to using commonly available everyday technology, including Microsoft software, to manage and streamline research projects. It uses straight-forward, everyday language to walk readers through this process, drawing on a wide range of examples to demonstrate how easy it is to use such software. This guide is…

A Guide to Fast and Simple Web Site Development. Using Microsoft FrontPage.

ERIC Educational Resources Information Center

La, Minh; Beachler, Judith

Designed by California's Los Rios Community College District for use in instructional workshops, this guide is intended to help institutional researchers create World Wide Web sites using Microsoft FrontPage (MF) software. The first part of the guide presents practical suggestions for working with the software to create a site, covering the…

Flexible Feature-Based Inhibition in Visual Search Mediates Magnified Impairments of Selection: Evidence from Carry-Over Effects under Dynamic Preview-Search Conditions

ERIC Educational Resources Information Center

Andrews, Lucy S.; Watson, Derrick G.; Humphreys, Glyn W.; Braithwaite, Jason J.

2011-01-01

Evidence for inhibitory processes in visual search comes from studies using preview conditions, where responses to new targets are delayed if they carry a featural attribute belonging to the old distractor items that are currently being ignored--the negative carry-over effect (Braithwaite, Humphreys, & Hodsoll, 2003). We examined whether…

Preschool Children's Comprehension of a "Sesame Street" Video Tape: The Effects of Repeated Viewing and Previewing Instructions.

ERIC Educational Resources Information Center

Sell, Marie A.; And Others

1995-01-01

Twenty male and 20 female 4-year olds viewed a 19-minute "Sesame Street" videotape once a week for 3 weeks to determine whether comprehension would improve if time was given to "process" the tape and if instructions were previewed. Findings indicate that repeated viewing was most important in comprehension; previewing…

Scope of Lexical Access in Spoken Sentence Production: Implications for the Conceptual-Syntactic Interface

ERIC Educational Resources Information Center

Allum, Paul H.; Wheeldon, L.

2009-01-01

Building on P. H. Allum and L. Wheeldon (2007), the authors conducted 5 experiments to investigate the scope of lexical access during spoken sentence production in Japanese and English. Speakers described pairs of pictured objects, and on critical trials, 1 object was previewed. In Japanese, sentence onset is speeded by the preview of each of the…

Norton Healthcare's campaign strategy: focus on employees. They appear in commercials and attend preview showings.

PubMed

Botvin, Judith D

2002-01-01

Norton Healthcare, a 2,000-bed system with headquarters in Louisville, Ky., previewed its big branding campaign with its 8,000 employees. During National Hospital Week, employees viewed a five-minute behind-the-scenes video showing more than 50 of their colleagues serving as actors and models in the TV, radio and print ads.

Using a Template to Facilitate External Peer Preview of Curriculum: A Variation on the PRoT Theme

ERIC Educational Resources Information Center

Sealey, Rebecca

2013-01-01

Peer reviewing of teaching and curriculum in Higher Education is a common practice aimed at both quality assurance and professional development. External review of curriculum prior to implementation appears less common. The aim of this project was to develop, implement and evaluate a user-friendly process for external peer preview of teaching…

Direct Lexical Control of Eye Movements in Reading: Evidence from a Survival Analysis of Fixation Durations

ERIC Educational Resources Information Center

Reingold, Eyal M.; Reichle, Erik D.; Glaholt, Mackenzie G.; Sheridan, Heather

2012-01-01

Participants' eye movements were monitored in an experiment that manipulated the frequency of target words (high vs. low) as well as their availability for parafoveal processing during fixations on the pre-target word (valid vs. invalid preview). The influence of the word-frequency by preview validity manipulation on the distributions of first…

Do Chinese Readers Obtain Preview Benefit from Word "n" + 2? Evidence from Eye Movements

ERIC Educational Resources Information Center

Yang, Jinmian; Wang, Suiping; Xu, Yimin; Rayner, Keith

2009-01-01

The boundary paradigm (K. Rayner, 1975) was used to determine the extent to which Chinese readers obtain information from the right of fixation during reading. As characters are the basic visual unit in written Chinese, they were used as targets in Experiment 1 to examine whether readers obtain preview information from character "n" + 1 and…

A Padawan Programmer's Guide to Developing Software Libraries.

PubMed

Yurkovich, James T; Yurkovich, Benjamin J; Dräger, Andreas; Palsson, Bernhard O; King, Zachary A

2017-11-22

With the rapid adoption of computational tools in the life sciences, scientists are taking on the challenge of developing their own software libraries and releasing them for public use. This trend is being accelerated by popular technologies and platforms, such as GitHub, Jupyter, R/Shiny, that make it easier to develop scientific software and by open-source licenses that make it easier to release software. But how do you build a software library that people will use? And what characteristics do the best libraries have that make them enduringly popular? Here, we provide a reference guide, based on our own experiences, for developing software libraries along with real-world examples to help provide context for scientists who are learning about these concepts for the first time. While we can only scratch the surface of these topics, we hope that this article will act as a guide for scientists who want to write great software that is built to last. Copyright © 2017 Elsevier Inc. All rights reserved.

Is attention confined to one word at a time? The spatial distribution of parafoveal preview benefits during reading.

PubMed

Wang, Chin-An; Inhoff, Albrecht W; Radach, Ralph

2009-10-01

Eye movements were recorded while participants read declarative sentences. Each sentence contained a critical three-word sequence with a three-letter target word (n), a spatially adjacent post-target word (n+1), and a subsequent nonadjacent post-target word (n+2). The parafoveal previews of words n and n+2 were manipulated so that they were either fully visible or masked until they were fixated. The results revealed longer word n and word n+1 viewing durations when word n had been masked in the parafovea, and this occurred irrespective of whether the target was skipped or fixated. Furthermore, masking of word n diminished the usefulness of the preview of word n+2. These results indicate that the effect of a parafoveally available target preview was not strictly localized. Instead, it influenced target viewing and the viewing of the two subsequent words in the text. These results are difficult to reconcile with the assumption that attention is confined to one word at a time until that word is recognized and that attention is then shifted from the recognized word to the next.

Query-Biased Preview over Outsourced and Encrypted Data

PubMed Central

Luo, Guangchun; Qin, Ke; Chen, Aiguo

2013-01-01

For both convenience and security, more and more users encrypt their sensitive data before outsourcing it to a third party such as cloud storage service. However, searching for the desired documents becomes problematic since it is costly to download and decrypt each possibly needed document to check if it contains the desired content. An informative query-biased preview feature, as applied in modern search engine, could help the users to learn about the content without downloading the entire document. However, when the data are encrypted, securely extracting a keyword-in-context snippet from the data as a preview becomes a challenge. Based on private information retrieval protocol and the core concept of searchable encryption, we propose a single-server and two-round solution to securely obtain a query-biased snippet over the encrypted data from the server. We achieve this novel result by making a document (plaintext) previewable under any cryptosystem and constructing a secure index to support dynamic computation for a best matched snippet when queried by some keywords. For each document, the scheme has O(d) storage complexity and O(log(d/s) + s + d/s) communication complexity, where d is the document size and s is the snippet length. PMID:24078798

Query-biased preview over outsourced and encrypted data.

PubMed

Peng, Ningduo; Luo, Guangchun; Qin, Ke; Chen, Aiguo

2013-01-01

For both convenience and security, more and more users encrypt their sensitive data before outsourcing it to a third party such as cloud storage service. However, searching for the desired documents becomes problematic since it is costly to download and decrypt each possibly needed document to check if it contains the desired content. An informative query-biased preview feature, as applied in modern search engine, could help the users to learn about the content without downloading the entire document. However, when the data are encrypted, securely extracting a keyword-in-context snippet from the data as a preview becomes a challenge. Based on private information retrieval protocol and the core concept of searchable encryption, we propose a single-server and two-round solution to securely obtain a query-biased snippet over the encrypted data from the server. We achieve this novel result by making a document (plaintext) previewable under any cryptosystem and constructing a secure index to support dynamic computation for a best matched snippet when queried by some keywords. For each document, the scheme has O(d) storage complexity and O(log(d/s) + s + d/s) communication complexity, where d is the document size and s is the snippet length.

Direct lexical control of eye movements in reading: Evidence from a survival analysis of fixation durations

PubMed Central

Reingold, Eyal M.; Reichle, Erik D.; Glaholt, Mackenzie G.; Sheridan, Heather

2013-01-01

Participants’ eye movements were monitored in an experiment that manipulated the frequency of target words (high vs. low) as well as their availability for parafoveal processing during fixations on the pre-target word (valid vs. invalid preview). The influence of the word-frequency by preview validity manipulation on the distributions of first fixation duration was examined by using ex-Gaussian fitting as well as a novel survival analysis technique which provided precise estimates of the timing of the first discernible influence of word frequency on first fixation duration. Using this technique, we found a significant influence of word frequency on fixation duration in normal reading (valid preview) as early as 145 ms from the start of fixation. We also demonstrated an equally rapid non-lexical influence on first fixation duration as a function of initial landing position (location) on target words. The time-course of frequency effects, but not location effects was strongly influenced by preview validity, demonstrating the crucial role of parafoveal processing in enabling direct lexical control of reading fixation times. Implications for models of eye-movement control are discussed. PMID:22542804

Generalized pipeline for preview and rendering of synthetic holograms

NASA Astrophysics Data System (ADS)

Pappu, Ravikanth; Sparrell, Carlton J.; Underkoffler, John S.; Kropp, Adam B.; Chen, Benjie; Plesniak, Wendy J.

1997-04-01

We describe a general pipeline for the computation and display of either fully-computed holograms or holographic stereograms using the same 3D database. A rendering previewer on a Silicon Graphics Onyx allows a user to specify viewing geometry, database transformations, and scene lighting. The previewer then generates one of two descriptions of the object--a series of perspective views or a polygonal model--which is then used by a fringe rendering engine to compute fringes specific to hologram type. The images are viewed on the second generation MIT Holographic Video System. This allows a viewer to compare holographic stereograms with fully-computed holograms originating from the same database and comes closer to the goal of a single pipeline being able to display the same data in different formats.

Preview-Based Stable-Inversion for Output Tracking

NASA Technical Reports Server (NTRS)

Zou, Qing-Ze; Devasia, Santosh

1999-01-01

Stable Inversion techniques can be used to achieve high-accuracy output tracking. However, for nonminimum phase systems, the inverse is non-causal - hence the inverse has to be pre-computed using a pre-specified desired-output trajectory. This requirement for pre-specification of the desired output restricts the use of inversion-based approaches to trajectory planning problems (for nonminimum phase systems). In the present article, it is shown that preview information of the desired output can be used to achieve online inversion-based output tracking of linear systems. The amount of preview-time needed is quantified in terms of the tracking error and the internal dynamics of the system (zeros of the system). The methodology is applied to the online output tracking of a flexible structure and experimental results are presented.

UAF: a generic OPC unified architecture framework

NASA Astrophysics Data System (ADS)

Pessemier, Wim; Deconinck, Geert; Raskin, Gert; Saey, Philippe; Van Winckel, Hans

2012-09-01

As an emerging Service Oriented Architecture (SOA) specically designed for industrial automation and process control, the OPC Unied Architecture specication should be regarded as an attractive candidate for controlling scientic instrumentation. Even though an industry-backed standard such as OPC UA can oer substantial added value to these projects, its inherent complexity poses an important obstacle for adopting the technology. Building OPC UA applications requires considerable eort, even when taking advantage of a COTS Software Development Kit (SDK). The OPC Unied Architecture Framework (UAF) attempts to reduce this burden by introducing an abstraction layer between the SDK and the application code in order to achieve a better separation of the technical and the functional concerns. True to its industrial origin, the primary requirement of the framework is to maintain interoperability by staying close to the standard specications, and by expecting the minimum compliance from other OPC UA servers and clients. UAF can therefore be regarded as a software framework to quickly and comfortably develop and deploy OPC UA-based applications, while remaining compatible to third party OPC UA-compliant toolkits, servers (such as PLCs) and clients (such as SCADA software). In the rst phase, as covered by this paper, only the client-side of UAF has been tackled in order to transparently handle discovery, session management, subscriptions, monitored items etc. We describe the design principles and internal architecture of our open-source software project, the rst results of the framework running at the Mercator Telescope, and we give a preview of the planned server-side implementation.

From the Ionosphere to the Classroom: Exploring the Earth's Upper Atmosphere with CINDI

NASA Astrophysics Data System (ADS)

Urquhart, M. L.; Hairston, M. R.

2004-12-01

CINDI (Coupled Ion Neutral Dynamic Investigation) is a NASA funded instrument scheduled for an early 2005 launch by the Air Force on board the C/NOFS (Communications/Navigations Outage Forecast System) satellite. In preparation for this launch, our education and public outreach program is well under way, and focuses on making the difficult-to-visualize science of the ionosphere understandable to students in middle school and above. Our formal education strategy is to create engaging and usable materials that meet teachers' needs and integrate well into existing curriculum in today's era of high stakes testing. We will present our middle school educator guide, a preview of our new CINDI comic book, highlights from our 2004 educator workshops, and future plans to bring the ionosphere into classrooms around the country.

Visual Marking and Change Blindness: Moving Occluders and Transient Masks Neutralize Shape Changes to Ignored Objects

ERIC Educational Resources Information Center

Watson, Derrick G.; Kunar, Melina A.

2010-01-01

Visual search efficiency improves by presenting (previewing) one set of distractors before the target and remaining distractor items (D. G. Watson & G. W. Humphreys, 1997). Previous work has shown that this preview benefit is abolished if the old items change their shape when the new items are added (e.g., D. G. Watson & G. W. Humphreys,…

Preview Effects of Plausibility and Character Order in Reading Chinese Transposed Words: Evidence from Eye Movements

ERIC Educational Resources Information Center

Yang, Jinmian

2013-01-01

The current paper examined the role of plausibility information in the parafovea for Chinese readers by using two-character transposed words (in which the order of the component characters is reversed but are still words). In two eye-tracking experiments, readers received a preview of a target word that was (1) identical to the target word, (2) a…

Words, Shape, Visual Search and Visual Working Memory in 3-Year-Old Children

ERIC Educational Resources Information Center

Vales, Catarina; Smith, Linda B.

2015-01-01

Do words cue children's visual attention, and if so, what are the relevant mechanisms? Across four experiments, 3-year-old children (N = 163) were tested in visual search tasks in which targets were cued with only a visual preview versus a visual preview and a spoken name. The experiments were designed to determine whether labels facilitated…

The Effect of High- and Low-Frequency Previews and Sentential Fit on Word Skipping during Reading

ERIC Educational Resources Information Center

Angele, Bernhard; Laishley, Abby E.; Rayner, Keith; Liversedge, Simon P.

2014-01-01

In a previous gaze-contingent boundary experiment, Angele and Rayner (2013) found that readers are likely to skip a word that appears to be the definite article "the" even when syntactic constraints do not allow for articles to occur in that position. In the present study, we investigated whether the word frequency of the preview of a…

DESI-Detection of early-season invasives (software-installation manual and user's guide version 1.0)

USGS Publications Warehouse

Kokaly, Raymond F.

2011-01-01

This report describes a software system for detecting early-season invasive plant species, such as cheatgrass. The report includes instructions for installing the software and serves as a user's guide in processing Landsat satellite remote sensing data to map the distributions of cheatgrass and other early-season invasive plants. The software was developed for application to the semi-arid regions of southern Utah; however, the detection parameters can be altered by the user for application to other areas.

An off-the-shelf guider for the Palomar 200-inch telescope: interfacing amateur astronomy software with professional telescopes for an easy life

NASA Astrophysics Data System (ADS)

Clarke, Fraser; Lynn, James; Thatte, Niranjan; Tecza, Matthias

2014-08-01

We have developed a simple but effective guider for use with the Oxford-SWIFT integral field spectrograph on the Palomar 200-inch telescope. The guider uses mainly off-the-shelf components, including commercial amateur astronomy software to interface with the CCD camera, calculating guiding corrections, and send guide commands to the telescope. The only custom piece of software is an driver to provide an interface between the Palomar telescope control system and the industry standard 'ASCOM' system. Using existing commercial software provided a very cheap guider (<$5000) with minimal (<15 minutes) commissioning time. The final system provides sub-arcsecond guiding, and could easily be adapted to any other professional telescope

Operator priming and generalization of practice in adults' simple arithmetic.

PubMed

Chen, Yalin; Campbell, Jamie I D

2016-04-01

There is a renewed debate about whether educated adults solve simple addition problems (e.g., 2 + 3) by direct fact retrieval or by fast, automatic counting-based procedures. Recent research testing adults' simple addition and multiplication showed that a 150-ms preview of the operator (+ or ×) facilitated addition, but not multiplication, suggesting that a general addition procedure was primed by the + sign. In Experiment 1 (n = 36), we applied this operator-priming paradigm to rule-based problems (0 + N = N, 1 × N = N, 0 × N = 0) and 1 + N problems with N ranging from 0 to 9. For the rule-based problems, we found both operator-preview facilitation and generalization of practice (e.g., practicing 0 + 3 sped up unpracticed 0 + 8), the latter being a signature of procedure use; however, we also found operator-preview facilitation for 1 + N in the absence of generalization, which implies the 1 + N problems were solved by fact retrieval but nonetheless were facilitated by an operator preview. Thus, the operator preview effect does not discriminate procedure use from fact retrieval. Experiment 2 (n = 36) investigated whether a population with advanced mathematical training-engineering and computer science students-would show generalization of practice for nonrule-based simple addition problems (e.g., 1 + 4, 4 + 7). The 0 + N problems again presented generalization, whereas no nonzero problem type did; but all nonzero problems sped up when the identical problems were retested, as predicted by item-specific fact retrieval. The results pose a strong challenge to the generality of the proposal that skilled adults' simple addition is based on fast procedural algorithms, and instead support a fact-retrieval model of fast addition performance. (c) 2016 APA, all rights reserved).

Real-time immune-inspired optimum state-of-charge trajectory estimation using upcoming route information preview and neural networks for plug-in hybrid electric vehicles fuel economy

NASA Astrophysics Data System (ADS)

Mozaffari, Ahmad; Vajedi, Mahyar; Azad, Nasser L.

2015-06-01

The main proposition of the current investigation is to develop a computational intelligence-based framework which can be used for the real-time estimation of optimum battery state-of-charge (SOC) trajectory in plug-in hybrid electric vehicles (PHEVs). The estimated SOC trajectory can be then employed for an intelligent power management to significantly improve the fuel economy of the vehicle. The devised intelligent SOC trajectory builder takes advantage of the upcoming route information preview to achieve the lowest possible total cost of electricity and fossil fuel. To reduce the complexity of real-time optimization, the authors propose an immune system-based clustering approach which allows categorizing the route information into a predefined number of segments. The intelligent real-time optimizer is also inspired on the basis of interactions in biological immune systems, and is called artificial immune algorithm (AIA). The objective function of the optimizer is derived from a computationally efficient artificial neural network (ANN) which is trained by a database obtained from a high-fidelity model of the vehicle built in the Autonomie software. The simulation results demonstrate that the integration of immune inspired clustering tool, AIA and ANN, will result in a powerful framework which can generate a near global optimum SOC trajectory for the baseline vehicle, that is, the Toyota Prius PHEV. The outcomes of the current investigation prove that by taking advantage of intelligent approaches, it is possible to design a computationally efficient and powerful SOC trajectory builder for the intelligent power management of PHEVs.

System administrator`s guide to CDPS. Version 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Didier, B.T.; Portwood, M.H.

The System Administrator`s Guide to CDPS is intended for those responsible for setting up and maintaining the hardware and software of a Common Mapping Standard (CMS) Date Production System (CDPS) installation. This guide assists the system administrator in performing typical administrative functions. It is not intended to replace the Ultrix Documentation Set that should be available for a DCPS installation. The Ultrix Documentation Set will be required to provide details on referenced Ultrix commands as well as procedures for performing Ultrix maintenance functions. There are six major sections in this guide. Section 1 introduces the system administrator to CDPS andmore » describes the assumptions that are made by this guide. Section 2 describes the CDPS platform configuration. Section 3 describes the platform preparation that is required to install the CDPS software. Section 4 describes the CPS software and its installation procedures. Section 5 describes the CDS software and its installation procedures. Section 6 describes various operation and maintenance procedures. Four appendices are also provided. Appendix A contains a list of used acronyms. Appendix B provides a terse description of common Ultrix commands that are used in administrative functions. Appendix C provides sample CPS and CDS configuration files. Appendix D provides a required list and a recommended list of Ultrix software subsets for installation on a CDPS platform.« less

Building Efficiency Evaluation and Uncertainty Analysis with DOE's Asset Score Preview

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2016-08-12

Building Energy Asset Score Tool, developed by the U.S. Department of Energy (DOE), is a program to encourage energy efficiency improvement by helping building owners and managers assess a building's energy-related systems independent of operations and maintenance. Asset Score Tool uses a simplified EnergyPlus model to provide an assessment of building systems, through minimum user inputs of basic building characteristics. Asset Score Preview is a newly developed option that allows users to assess their building's systems and the potential value of a more in-depth analysis via an even more simplified approach. This methodology provides a preliminary approach to estimating amore » building's energy efficiency and potential for improvement. This paper provides an overview of the methodology used for the development of Asset Score Preview and the scoring methodology.« less

CBT Pilot Program Instructional Guide. Basic Drafting Skills Curriculum Delivered through CAD Workstations and Artificial Intelligence Software.

ERIC Educational Resources Information Center

Smith, Richard J.; Sauer, Mardelle A.

This guide is intended to assist teachers in using computer-aided design (CAD) workstations and artificial intelligence software to teach basic drafting skills. The guide outlines a 7-unit shell program that may also be used as a generic authoring system capable of supporting computer-based training (CBT) in other subject areas. The first section…

Web-based Hyper Suprime-Cam Data Providing System

NASA Astrophysics Data System (ADS)

Koike, M.; Furusawa, H.; Takata, T.; Price, P.; Okura, Y.; Yamada, Y.; Yamanoi, H.; Yasuda, N.; Bickerton, S.; Katayama, N.; Mineo, S.; Lupton, R.; Bosch, J.; Loomis, C.

2014-05-01

We describe a web-based user interface to retrieve Hyper Suprime-Cam data products, including images and. Users can access data directly from a graphical user interface or by writing a database SQL query. The system provides raw images, reduced images and stacked images (from multiple individual exposures), with previews available. Catalog queries can be executed in preview or queue mode, allowing for both exploratory and comprehensive investigations.

Attention and eye-movement control in reading: The selective reading paradigm.

PubMed

Reingold, Eyal M; Sheridan, Heather; Meadmore, Katie L; Drieghe, Denis; Liversedge, Simon P

2016-12-01

We introduced a novel paradigm for investigating covert attention and eye-movement control in reading. In 2 experiments, participants read sentence words (shown in blue color) while ignoring interleaved distractor strings (shown in orange color). Each single-line text display contained a target word and a critical distractor. Critical distractors were located just prior to the target in the text and were either words or symbol strings (e.g., @#%&). Target word availability for parafoveal processing (i.e., preview validity) was also manipulated. The results indicated much shallower processing of distractors than targets, and this pattern was more pronounced for symbol than word distractors. The influences of word frequency and fixation location on first-pass fixation durations on distractors were dramatically different than the well-documented pattern obtained in normal reading. Robust preview benefits were demonstrated both when the critical distractors were fixated and when the critical distractors were skipped. Finally, with the exception of larger preview benefits that were obtained in the condition in which the target and critical distractor were identical, the magnitude of the preview effect was largely unaffected by the nature of the critical distractor. Implications of the present paradigm and findings to the study of eye-movement control in reading are discussed. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Optimal control to modelling motorcycle rider steering: local versus global coordinate systems in rider preview

NASA Astrophysics Data System (ADS)

Rowell, S.; Popov, A. A.; Meijaard, J. P.

2010-04-01

The response of a motorcycle is heavily dependent on the rider's control actions, and consequently a means of replicating the rider's behaviour provides an important extension to motorcycle dynamics. The primary objective here is to develop effective path-following simulations and to understand how riders control motorcycles. Optimal control theory is applied to the tracking of roadway by a motorcycle, using a non-linear motorcycle model operating in free control by steering torque input. A path-following controller with road preview is designed by minimising tracking errors and control effort. Tight controls with high weightings on performance and loose controls with high weightings on control power are defined. Special attention is paid to the modelling of multipoint preview in local and global coordinate systems. The controller model is simulated over a standard single lane-change manoeuvre. It is argued that the local coordinates point of view is more representative of the way that a human rider operates and interprets information. The simulations suggest that for accurate path following, using optimal control, the problem must be solved by the local coordinates approach in order to achieve accurate results with short preview horizons. Furthermore, some weaknesses of the optimal control approach are highlighted here.

Adult age differences in the perceptual span during reading.

PubMed

Risse, Sarah; Kliegl, Reinhold

2011-06-01

Following up on research suggesting an age-related reduction in the rightward extent of the perceptual span during reading (Rayner, Castelhano, & Yang, 2009), we compared old and young adults in an N + 2-boundary paradigm in which a nonword preview of word N + 2 or word N + 2 itself is replaced by the target word once the eyes cross an invisible boundary located after word N. The intermediate word N + 1 was always three letters long. Gaze durations on word N + 2 were significantly shorter for identical than nonword N + 2 preview both for young and for old adults, with no significant difference in this preview benefit. Young adults, however, did modulate their gaze duration on word N more strongly than old adults in response to the difficulty of the parafoveal word N + 1. Taken together, the results suggest a dissociation of preview benefit and parafoveal-on-foveal effect. Results are discussed in terms of age-related decline in resilience towards distributed processing while simultaneously preserving the ability to integrate parafoveal information into foveal processing. As such, the present results relate to proposals of regulatory compensation strategies older adults use to secure an overall reading speed very similar to that of young adults. (c) 2011 APA, all rights reserved.

HAL/S programmer's guide. [space shuttle flight software language

NASA Technical Reports Server (NTRS)

Newbold, P. M.; Hotz, R. L.

1974-01-01

HAL/S is a programming language developed to satisfy the flight software requirements for the space shuttle program. The user's guide explains pertinent language operating procedures and described the various HAL/S facilities for manipulating integer, scalar, vector, and matrix data types.

The image-guided surgery toolkit IGSTK: an open source C++ software toolkit.

PubMed

Enquobahrie, Andinet; Cheng, Patrick; Gary, Kevin; Ibanez, Luis; Gobbi, David; Lindseth, Frank; Yaniv, Ziv; Aylward, Stephen; Jomier, Julien; Cleary, Kevin

2007-11-01

This paper presents an overview of the image-guided surgery toolkit (IGSTK). IGSTK is an open source C++ software library that provides the basic components needed to develop image-guided surgery applications. It is intended for fast prototyping and development of image-guided surgery applications. The toolkit was developed through a collaboration between academic and industry partners. Because IGSTK was designed for safety-critical applications, the development team has adopted lightweight software processes that emphasizes safety and robustness while, at the same time, supporting geographically separated developers. A software process that is philosophically similar to agile software methods was adopted emphasizing iterative, incremental, and test-driven development principles. The guiding principle in the architecture design of IGSTK is patient safety. The IGSTK team implemented a component-based architecture and used state machine software design methodologies to improve the reliability and safety of the components. Every IGSTK component has a well-defined set of features that are governed by state machines. The state machine ensures that the component is always in a valid state and that all state transitions are valid and meaningful. Realizing that the continued success and viability of an open source toolkit depends on a strong user community, the IGSTK team is following several key strategies to build an active user community. These include maintaining a users and developers' mailing list, providing documentation (application programming interface reference document and book), presenting demonstration applications, and delivering tutorial sessions at relevant scientific conferences.

Shade matching assisted by digital photography and computer software.

PubMed

Schropp, Lars

2009-04-01

To evaluate the efficacy of digital photographs and graphic computer software for color matching compared to conventional visual matching. The shade of a tab from a shade guide (Vita 3D-Master Guide) placed in a phantom head was matched to a second guide of the same type by nine observers. This was done for twelve selected shade tabs (tests). The shade-matching procedure was performed visually in a simulated clinic environment and with digital photographs, and the time spent for both procedures was recorded. An alternative arrangement of the shade tabs was used in the digital photographs. In addition, a graphic software program was used for color analysis. Hue, chroma, and lightness values of the test tab and all tabs of the second guide were derived from the digital photographs. According to the CIE L*C*h* color system, the color differences between the test tab and tabs of the second guide were calculated. The shade guide tab that deviated least from the test tab was determined to be the match. Shade matching performance by means of graphic software was compared with the two visual methods and tested by Chi-square tests (alpha= 0.05). Eight of twelve test tabs (67%) were matched correctly by the computer software method. This was significantly better (p < 0.02) than the performance of the visual shade matching methods conducted in the simulated clinic (32% correct match) and with photographs (28% correct match). No correlation between time consumption for the visual shade matching methods and frequency of correct match was observed. Shade matching assisted by digital photographs and computer software was significantly more reliable than by conventional visual methods.

Virtually fabricated guide for placement of the C-tube miniplate.

PubMed

Paek, Janghyun; Jeong, Do-Min; Kim, Yong; Kim, Seong-Hun; Chung, Kyu-Rhim; Nelson, Gerald

2014-05-01

This paper introduces a virtually planned and stereolithographically fabricated guiding system that will allow the clinician to plan carefully for the best location of the device and to achieve an accurate position without complications. The scanned data from preoperative dental casts were edited to obtain preoperative 3-dimensional (3D) virtual models of the dentition. After the 3D virtual models were repositioned, the 3D virtual surgical guide was fabricated. A surgical guide was created onscreen, and then these virtual guides were materialized into real ones using the stereolithographic technique. Whereas the previously described guide required laboratory work to be performed by the orthodontist, our technique is more convenient because the laboratory work is done remotely by computer-aided design/computer-aided manufacturing technology. Because the miniplate is firmly held in place as the patient holds his or her mandibular teeth against the occlusal pad of the surgical guide, there is no risk that the miniscrews can slide on the bone surface during placement. The software program (2.5-dimensional software) in this study combines 2-dimensional cephalograms with 3D virtual dental models. This software is an effective and efficient alternative to 3D software when 3D computed tomography data are not available. To confidently and safely place a miniplate with screw fixation, a simple customized guide for an orthodontic miniplate was introduced. The use of a custom-made, rigid guide when placing miniplates will minimize complications such as vertical mislocation or slippage of the miniplate during placement. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Real-time solar magnetograph operation system software design and user's guide

NASA Technical Reports Server (NTRS)

Wang, C.

1984-01-01

The Real Time Solar Magnetograph (RTSM) Operation system software design on PDP11/23+ is presented along with the User's Guide. The RTSM operation software is for real time instrumentation control, data collection and data management. The data is used for vector analysis, plotting or graphics display. The processed data is then easily compared with solar data from other sources, such as the Solar Maximum Mission (SMM).

A User's Guide to the Meta-Analysis of Research Studies. Meta-Stat: Software To Aid in the Meta-Analysis of Research Findings.

ERIC Educational Resources Information Center

Rudner, Lawrence M.; Glass Gene V.; Evartt, David L.; Emery, Patrick J.

This manual and the accompanying software are intended to provide a step-by-step guide to conducting a meta-analytic study along with references for further reading and free high-quality software, "Meta-Stat.""Meta-Stat" is a comprehensive package designed to help in the meta-analysis of research studies in the social and behavioral sciences.…

Simplifying applications software for vision guided robot implementation

NASA Technical Reports Server (NTRS)

Duncheon, Charlie

1994-01-01

A simple approach to robot applications software is described. The idea is to use commercially available software and hardware wherever possible to minimize system costs, schedules and risks. The U.S. has been slow in the adaptation of robots and flexible automation compared to the fluorishing growth of robot implementation in Japan. The U.S. can benefit from this approach because of a more flexible array of vision guided robot technologies.

3DNOW: Image-Based 3d Reconstruction and Modeling via Web

NASA Astrophysics Data System (ADS)

Tefera, Y.; Poiesi, F.; Morabito, D.; Remondino, F.; Nocerino, E.; Chippendale, P.

2018-05-01

This paper presents a web-based 3D imaging pipeline, namely 3Dnow, that can be used by anyone without the need of installing additional software other than a browser. By uploading a set of images through the web interface, 3Dnow can generate sparse and dense point clouds as well as mesh models. 3D reconstructed models can be downloaded with standard formats or previewed directly on the web browser through an embedded visualisation interface. In addition to reconstructing objects, 3Dnow offers the possibility to evaluate and georeference point clouds. Reconstruction statistics, such as minimum, maximum and average intersection angles, point redundancy and density can also be accessed. The paper describes all features available in the web service and provides an analysis of the computational performance using servers with different GPU configurations.

Virtual Observatory Science Applications

NASA Technical Reports Server (NTRS)

McGlynn, Tom

2005-01-01

Many Virtual-Observatory-based applications are now available to astronomers for use in their research. These span data discovery, access, visualization and analysis. Tools can quickly gather and organize information from sites around the world to help in planning a response to a gamma-ray burst, help users pick filters to isolate a desired feature, make an average template for z=2 AGN, select sources based upon information in many catalogs, or correlate massive distributed databases. Using VO protocols, the reach of existing software tools and packages can be greatly extended, allowing users to find and access remote information almost as conveniently as local data. The talk highlights just a few of the tools available to scientists, describes how both large and small scale projects can use existing tools, and previews some of the new capabilities that will be available in the next few years.

Predictors of verb-mediated anticipatory eye movements in the visual world.

PubMed

Hintz, Florian; Meyer, Antje S; Huettig, Falk

2017-09-01

Many studies have demonstrated that listeners use information extracted from verbs to guide anticipatory eye movements to objects in the visual context that satisfy the selection restrictions of the verb. An important question is what underlies such verb-mediated anticipatory eye gaze. Based on empirical and theoretical suggestions, we investigated the influence of 5 potential predictors of this behavior: functional associations and general associations between verb and target object, as well as the listeners' production fluency, receptive vocabulary knowledge, and nonverbal intelligence. In 3 eye-tracking experiments, participants looked at sets of 4 objects and listened to sentences where the final word was predictable or not predictable (e.g., "The man peels/draws an apple"). On predictable trials only the target object, but not the distractors, were functionally and associatively related to the verb. In Experiments 1 and 2, objects were presented before the verb was heard. In Experiment 3, participants were given a short preview of the display after the verb was heard. Functional associations and receptive vocabulary were found to be important predictors of verb-mediated anticipatory eye gaze independent of the amount of contextual visual input. General word associations did not and nonverbal intelligence was only a very weak predictor of anticipatory eye movements. Participants' production fluency correlated positively with the likelihood of anticipatory eye movements when participants were given the long but not the short visual display preview. These findings fit best with a pluralistic approach to predictive language processing in which multiple mechanisms, mediating factors, and situational context dynamically interact. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Integrated Baseline System (IBS). Version 1.03, System Management Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, J.R.; Bailey, S.; Bower, J.C.

This IBS System Management Guide explains how to install or upgrade the Integrated Baseline System (IBS) software package. The IBS is an emergency management planning and analysis tool that was developed under the direction of the Federal Emergency Management Agency (FEMA). This guide includes detailed instructions for installing the IBS software package on a Digital Equipment Corporation (DEC) VAX computer from the IBS distribution tapes. The installation instructions include procedures for both first-time installations and upgrades to existing IBS installations. To ensure that the system manager has the background necessary for successful installation of the IBS package, this guide alsomore » includes information on IBS computer requirements, software organization, and the generation of IBS distribution tapes. When special utility programs are used during IBS installation and setups, this guide refers you to the IBS Utilities Guide for specific instructions. This guide also refers you to the IBS Data Management Guide for detailed descriptions of some IBS data files and structures. Any special requirements for installation are not documented here but should be included in a set of installation notes that come with the distribution tapes.« less

Identification and Accessioning of Individuals for Officer Candidate School: Developing Realistic Job Previews

DTIC Science & Technology

2014-07-01

useful to them before they applied to OCS, and 86% of candidates saying they would refer someone else to the RJP. 15. SUBJECT TERMS Officers...Candidate School,” or AccessOCS, used qualitative methods (Oliver, Ardison, Russell, & Babin, 2010) to (a) identify and describe OCS applicants in terms...job previews (RJPs) that would provide OCS applicants with useful information in a single, but comprehensive document to facilitate the accessioning

The Realistic Job Preview as a Persuasive Communication.

DTIC Science & Technology

1982-02-01

10. PROGRAM ELEMENT, PROJECT. TAK AREA 6 WORK UNIT NUMBERS Michigan State Uiversity NR 170-894 Ii. CONTROLLING OFFICE NAME AND ADDRESS IS. REPORT...RJP research seems to show a stronger preview effect using more intelligent subjects. That is, studies of life insurance agents (Weitz, 1956; Youngberg...University Department of Psychological Sciences west Lafayette, INl 47907 1 Dr. Philip G. Zi±bardo*2 ~ Staniford Uiversity Department of Psychology Stanford, CA 94305 <El

The effect of high- and low-frequency previews and sentential fit on word skipping during reading

PubMed Central

Angele, Bernhard; Laishley, Abby; Rayner, Keith; Liversedge, Simon P.

2014-01-01

In a previous gaze-contingent boundary experiment, Angele and Rayner (2012) found that readers are likely to skip a word that appears to be the definite article the even when syntactic constraints do not allow for articles to occur in that position. In the present study, we investigated whether the word frequency of the preview of a three-letter target word influences a reader’s decision to fixate or skip that word. We found that the word frequency rather than the felicitousness (syntactic fit) of the preview affected how often the upcoming word was skipped. These results indicate that visual information about the upcoming word trumps information from the sentence context when it comes to making a skipping decision. Skipping parafoveal instances of the therefore may simply be an extreme case of skipping high-frequency words. PMID:24707791

Reading Computer Programs: Instructor’s Guide to Exercises

DTIC Science & Technology

1990-08-01

activities that underlie effective writing, many of which are similar to those underlying software development . The module draws on related work in a number...Instructor’s Guide and Exercises Abstract: The ability to read and understand a computer program is a criti- cal skill for the software developer , yet this...skill is seldom developed in any systematic way in the education or training of software professionals. These materials discuss the importance of

PLUS: open-source toolkit for ultrasound-guided intervention systems.

PubMed

Lasso, Andras; Heffter, Tamas; Rankin, Adam; Pinter, Csaba; Ungi, Tamas; Fichtinger, Gabor

2014-10-01

A variety of advanced image analysis methods have been under the development for ultrasound-guided interventions. Unfortunately, the transition from an image analysis algorithm to clinical feasibility trials as part of an intervention system requires integration of many components, such as imaging and tracking devices, data processing algorithms, and visualization software. The objective of our paper is to provide a freely available open-source software platform-PLUS: Public software Library for Ultrasound-to facilitate rapid prototyping of ultrasound-guided intervention systems for translational clinical research. PLUS provides a variety of methods for interventional tool pose and ultrasound image acquisition from a wide range of tracking and imaging devices, spatial and temporal calibration, volume reconstruction, simulated image generation, and recording and live streaming of the acquired data. This paper introduces PLUS, explains its functionality and architecture, and presents typical uses and performance in ultrasound-guided intervention systems. PLUS fulfills the essential requirements for the development of ultrasound-guided intervention systems and it aspires to become a widely used translational research prototyping platform. PLUS is freely available as open source software under BSD license and can be downloaded from http://www.plustoolkit.org.

Serial or overlapping processing in multitasking as individual preference: Effects of stimulus preview on task switching and concurrent dual-task performance.

PubMed

Reissland, Jessika; Manzey, Dietrich

2016-07-01

Understanding the mechanisms and performance consequences of multitasking has long been in focus of scientific interest, but has been investigated by three research lines more or less isolated from each other. Studies in the fields of the psychological refractory period, task switching, and interruptions have scored with a high experimental control, but usually do not give participants many degrees of freedom to self-organize the processing of two concurrent tasks. Individual strategies as well as their impact on efficiency have mainly been neglected. Self-organized multitasking has been investigated in the field of human factors, but primarily with respect to overall performance without detailed investigation of how the tasks are processed. The current work attempts to link aspects of these research lines. All of them, explicitly or implicitly, provide hints about an individually preferred type of task organization, either more cautious trying to work strictly serially on only one task at a time or more daring with a focus on task interleaving and, if possible, also partially overlapping (parallel) processing. In two experiments we investigated different strategies of task organization and their impact on efficiency using a new measure of overall multitasking efficiency. Experiment 1 was based on a classical task switching paradigm with two classification tasks, but provided one group of participants with a stimulus preview of the task to switch to next, enabling at least partial overlapping processing. Indeed, this preview led to a reduction of switch costs and to an increase of dual-task efficiency, but only for a subgroup of participants. They obviously exploited the possibility of overlapping processing, while the others worked mainly serially. While task-sequence was externally guided in the first experiment, Experiment 2 extended the approach by giving the participants full freedom of task organization in concurrent performance of the same tasks. Fine-grained analyses of response scheduling again revealed individual differences regarding the preference for strictly serial processing vs. some sort of task interleaving and overlapping processing. However, neither group showed a striking benefit in dual-task efficiency, although the results show that the costs of multitasking can partly be compensated by overlapping processing. Copyright © 2016 Elsevier B.V. All rights reserved.

Evaluator's Guide for Word Processing Software.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton.

This guide provides a detailed evaluation form, together with complete instructions for using it, which is designed to elicit answers to the following questions: (1) What features and abilities does a specific word processing program have? (2) On which computer(s) will the program work? (3) Is additional hardware/software necessary before the…

SIMULATION TOOL KIT FOR INDOOR AIR QUALITY AND INHALATION EXPOSURE (IAQX) VERSION 1.0 USER'S GUIDE

EPA Science Inventory

The User's Guide describes a Microsoft Windows-based indoor air quality (IAQ) simulation software package designed Simulation Tool Kit for Indoor Air Quality and Inhalation Exposure, or IAQX for short. This software complements and supplements existing IAQ simulation programs and...

Out of the corner of my eye: Foveal semantic load modulates parafoveal processing in reading

PubMed Central

Payne, Brennan R.; Stites, Mallory C.; Federmeier, Kara D.

2016-01-01

In two experiments, we examined the impact of foveal semantic expectancy and congruity on parafoveal word processing during reading. Experiment 1 utilized an eye-tracking gaze contingent display change paradigm, and Experiment 2 measured event-related brain potentials (ERP) in a modified flanker RSVP paradigm. Eye-tracking and ERP data converged to reveal graded effects of foveal load on parafoveal processing. In Experiment 1, when word n was highly expected, and thus foveal load was low, there was a large parafoveal preview benefit to word n + 1. When word n was unexpected but still plausible, preview benefits to n + 1 were reduced in magnitude, and when word n was semantically incongruent, the preview benefit to n + 1 was unreliable in early-pass measures. In Experiment 2, ERPs indicated that when word n was expected, and thus foveal load on was low, readers successfully discriminated between valid and orthographically invalid previews during parafoveal perception. However, when word n was unexpected, parafoveal processing of n + 1 was reduced, and it was eliminated when word n was semantically incongruent. Taken together, these findings suggest that sentential context modulates the allocation of attention in the parafovea, such that covert allocation of attention to parafoveal processing is disrupted when foveal words are inconsistent with expectations based on various contextual constraints. PMID:27428778

Out of the corner of my eye: Foveal semantic load modulates parafoveal processing in reading.

PubMed

Payne, Brennan R; Stites, Mallory C; Federmeier, Kara D

2016-11-01

In 2 experiments, we examined the impact of foveal semantic expectancy and congruity on parafoveal word processing during reading. Experiment 1 utilized an eye-tracking gaze-contingent display change paradigm, and Experiment 2 measured event-related brain potentials (ERPs) in a modified flanker rapid serial visual presentation (RSVP) paradigm. Eye-tracking and ERP data converged to reveal graded effects of foveal load on parafoveal processing. In Experiment 1, when word n was highly expected, and thus foveal load was low, there was a large parafoveal preview benefit to word n + 1. When word n was unexpected but still plausible, preview benefits to n + 1 were reduced in magnitude, and when word n was semantically incongruent, the preview benefit to n + 1 was unreliable in early pass measures. In Experiment 2, ERPs indicated that when word n was expected, and thus foveal load was low, readers successfully discriminated between valid and orthographically invalid previews during parafoveal perception. However, when word n was unexpected, parafoveal processing of n + 1 was reduced, and it was eliminated when word n was semantically incongruent. Taken together, these findings suggest that sentential context modulates the allocation of attention in the parafovea, such that covert allocation of attention to parafoveal processing is disrupted when foveal words are inconsistent with expectations based on various contextual constraints. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Guide to data collection

NASA Technical Reports Server (NTRS)

1981-01-01

Guidelines and recommendations are presented for the collection of software development data. Motivation and planning for, and implementation and management of, a data collection effort are discussed. Topics covered include types, sources, and availability of data; methods and costs of data collection; types of analyses supported; and warnings and suggestions based on software engineering laboratory (SEL) experiences. This document is intended as a practical guide for software managers and engineers, abstracted and generalized from 5 years of SEL data collection.

Technology Transfer Policy Applied to the U.S. Army Military History Institute Collection.

DTIC Science & Technology

1998-04-15

from the OSHA GUIDE data files. Computer software does not include computer database or computer software documentation. 1.10 "COMPUTER SOFTWARE...advising all current or future users of the OSHA GUIDE of its availability through XYZ COMPANY 32 CBks Memo 870-2 Appendix E Terms Cooperative... Malaysia No. PI920163 Mexico No. 925240 Philippines No. 44927 PCT US92/07556 Australia No. 26447/92 Canada No. 2,119,006 Czech Republic No. PV

The combination of digital surface scanners and cone beam computed tomography technology for guided implant surgery using 3Shape implant studio software: a case history report.

PubMed

Lanis, Alejandro; Álvarez Del Canto, Orlando

2015-01-01

The incorporation of virtual engineering into dentistry and the digitization of information are providing new perspectives and innovative alternatives for dental treatment modalities. The use of digital surface scanners with surgical planning software allows for the combination of the radiographic, prosthetic, surgical, and laboratory fields under a common virtual scenario, permitting complete digital treatment planning. In this article, the authors present a clinical case in which a guided implant surgery was performed based on a complete digital surgical plan combining the information from a cone beam computed tomography scan and the virtual simulation obtained from the 3Shape TRIOS intraoral surface scanner. The information was imported to and combined in the 3Shape Implant Studio software for guided implant surgery planning. A surgical guide was obtained by a 3D printer, and the surgical procedure was done using the Biohorizons Guided Surgery Kit and its protocol.

[Guided and computer-assisted implant surgery and prosthetic: The continuous digital workflow].

PubMed

Pascual, D; Vaysse, J

2016-02-01

New continuous digital workflow protocols of guided and computer-assisted implant surgery improve accuracy of implant positioning. The design of the future prosthesis is based on the available prosthetic space, gingival height and occlusal relationship with the opposing and adjacent teeth. The implant position and length depend on volume, density and bone quality, gingival height, tooth-implant and implant-implant distances, implant parallelism, axis and type of the future prosthesis. The crown modeled on the software will therefore serve as a guide to the future implant axis and not the reverse. The guide is made by 3D printing. The software determines surgical protocol with the drilling sequences. The unitary or plural prosthesis, modeled on the software and built before surgery, is loaded directly after implant placing, if needed. These protocols allow for a full continuity of the digital workflow. The software provides the surgeon and the dental technician a total freedom for the prosthetic-surgery guide design and the position of the implants. The prosthetic project, occlusal and aesthetic, taking the bony and surgical constraints into account, is optimized. The implant surgery is simplified and becomes less "stressful" for the patient and the surgeon. Guided and computer-assisted surgery with continuous digital workflow is becoming the technique of choice to improve the accuracy and quality of implant rehabilitation. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

COATING ALTERNATIVES GUIDE (CAGE) USER'S GUIDE

EPA Science Inventory

The guide provides instructions for using the Coating Alternatives GuidE (CAGE) software program, version 1.0. It assumes that the user is familiar with the fundamentals of operating an IBM-compatible personal computer (PC) under the Microsoft disk operating system (MS-DOS). CAGE...

SAGE 2.1: SOLVENT ALTERNATIVES GUIDE: USER'S GUIDE

EPA Science Inventory

The guide provides instruction for using the SAGE (Solvent Alternatives GuidE) software system, version 2.1. SAGE recommends solvent replacements in cleaning and degreasing operations. It leads the user through a question-and-answer session. The user's responses allow the system ...

Advanced communications technology satellite high burst rate link evaluation terminal communication protocol software user's guide, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1993-01-01

The Communication Protocol Software was developed at the NASA Lewis Research Center to support the Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal (ACTS HBR-LET). The HBR-LET is an experimenters terminal to communicate with the ACTS for various experiments by government, university, and industry agencies. The Communication Protocol Software is one segment of the Control and Performance Monitor (C&PM) Software system of the HBR-LET. The Communication Protocol Software allows users to control and configure the Intermediate Frequency Switch Matrix (IFSM) on board the ACTS to yield a desired path through the spacecraft payload. Besides IFSM control, the C&PM Software System is also responsible for instrument control during HBR-LET experiments, uplink power control of the HBR-LET to demonstrate power augmentation during signal fade events, and data display. The Communication Protocol Software User's Guide, Version 1.0 (NASA CR-189162) outlines the commands and procedures to install and operate the Communication Protocol Software. Configuration files used to control the IFSM, operator commands, and error recovery procedures are discussed. The Communication Protocol Software Maintenance Manual, Version 1.0 (NASA CR-189163, to be published) is a programmer's guide to the Communication Protocol Software. This manual details the current implementation of the software from a technical perspective. Included is an overview of the Communication Protocol Software, computer algorithms, format representations, and computer hardware configuration. The Communication Protocol Software Test Plan (NASA CR-189164, to be published) provides a step-by-step procedure to verify the operation of the software. Included in the Test Plan is command transmission, telemetry reception, error detection, and error recovery procedures.

The Software Jungle: To Guide or Not To Guide.

ERIC Educational Resources Information Center

Stigleman, Sue E.

This report describes a project which evaluated five IBM and Macintosh bibliographic formatting software programs--ProCite, Sci-Mate, Reference Manager, Notebook II, and Bibliography--and which was conducted by the Health Sciences Library at the University of North Carolina at Chapel Hill at the request of the campus microcomputer support center.…

Ed Tech Developer's Guide: A Primer for Software Developers, Startups, and Entrepreneurs

ERIC Educational Resources Information Center

Bienkowski, Marie; Gerard, Sarah Nixon; Rubin, Shawn; Sanford, Cathy; Borrelli-Murray, Dana; Driscoll, Tom; Arora, Jessie; Hruska, Mike; Beck, Katie; Murray, Thomas; Hoekstra, Jason; Gannes, Stuart; Metz, Edward; Midgley, Steve; Castilla, Stephanie; Tomassini, Jason; Madda, Mary Jo; Chase, Zac; Martin, Erik; Noel, Marcus; Styles, Kathleen

2015-01-01

Opportunities abound for software designers and developers to create impactful tools for teachers, school leaders, students, and their families. This guide for developers, startups, and entrepreneurs addresses key questions about the education ecosystem and highlights critical needs and opportunities to develop digital tools and apps for learning.…

Designing Better Camels: Developing Effective Documentation for Computer Software.

ERIC Educational Resources Information Center

Zacher, Candace M.

This guide to the development of effective documentation for users of computer software begins by identifying five types of documentation, i.e., training manuals, user guides, tutorials, on-screen help comments, and troubleshooting manuals. Six steps in the development process are then outlined and briefly described: (1) planning and preparation;…

A Constrained and Guided Approach for Managing Software Engineering Course Projects

ERIC Educational Resources Information Center

Cheng, Y.-P.; Lin, J. M.-C.

2010-01-01

This paper documents several years of experimentation with a new approach to organizing and managing projects in a software engineering course. The initial failure and subsequent refinements that the new approach has been through since 2004 are described herein. The "constrained and guided" approach, as it is called, has helped to reduce…

NED-2 User's Guide

Treesearch

Mark J. Twery; Peter D. Knopp; Scott A. Thomasma; Donald E. Nute

2011-01-01

This is the user's guide for NED-2, which is the latest version of NED, a forest ecosystem management decision support system. This software is part of a family of software products intended to help resource managers develop goals, assess current and future conditions, and produce sustainable management plans for forest properties. Designed for stand-alone Windows...

NED-2 reference guide

Treesearch

Mark J. Twery; Peter D. Knopp; Scott A. Thomasma; Donald E. Nute

2012-01-01

This is the reference guide for NED-2, which is the latest version of NED, a forest ecosystem management decision support system. This software is part of a family of software products intended to help resource managers develop goals, assess current and future conditions, and produce sustainable management plans for forest properties. Designed for stand-alone Windows-...

Hardwood log defect photographic database, software and user's guide

Treesearch

R. Edward Thomas

2009-01-01

Computer software and user's guide for Hardwood Log Defect Photographic Database. The database contains photographs and information on external hardwood log defects and the corresponding internal characteristics. This database allows users to search for specific defect types, sizes, and locations by tree species. For every defect, the database contains photos of...

Software Engineering Laboratory (SEL) data base reporting software user's guide and system description. Volume 2: Program descriptions

NASA Technical Reports Server (NTRS)

1983-01-01

The structure and functions of each reporting software program for the Software Engineering Laboratory data base are described. Baseline diagrams, module descriptions, and listings of program generation files are included.

Hierarchical and Parallelizable Direct Volume Rendering for Irregular and Multiple Grids

NASA Technical Reports Server (NTRS)

Wilhelms, Jane; VanGelder, Allen; Tarantino, Paul; Gibbs, Jonathan

1996-01-01

A general volume rendering technique is described that efficiently produces images of excellent quality from data defined over irregular grids having a wide variety of formats. Rendering is done in software, eliminating the need for special graphics hardware, as well as any artifacts associated with graphics hardware. Images of volumes with about one million cells can be produced in one to several minutes on a workstation with a 150 MHz processor. A significant advantage of this method for applications such as computational fluid dynamics is that it can process multiple intersecting grids. Such grids present problems for most current volume rendering techniques. Also, the wide range of cell sizes (by a factor of 10,000 or more), which is typical of such applications, does not present difficulties, as it does for many techniques. A spatial hierarchical organization makes it possible to access data from a restricted region efficiently. The tree has greater depth in regions of greater detail, determined by the number of cells in the region. It also makes it possible to render useful 'preview' images very quickly (about one second for one-million-cell grids) by displaying each region associated with a tree node as one cell. Previews show enough detail to navigate effectively in very large data sets. The algorithmic techniques include use of a kappa-d tree, with prefix-order partitioning of triangles, to reduce the number of primitives that must be processed for one rendering, coarse-grain parallelism for a shared-memory MIMD architecture, a new perspective transformation that achieves greater numerical accuracy, and a scanline algorithm with depth sorting and a new clipping technique.

77 FR 50722 - Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Software Unit Testing for Digital Computer Software...) is issuing for public comment draft regulatory guide (DG), DG-1208, ``Software Unit Testing for Digital Computer Software used in Safety Systems of Nuclear Power Plants.'' The DG-1208 is proposed...

78 FR 47011 - Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Software Unit Testing for Digital Computer Software... revised regulatory guide (RG), revision 1 of RG 1.171, ``Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants.'' This RG endorses American National Standards...

Preparation of cherry-picked combinatorial libraries by string synthesis.

PubMed

Furka, Arpád; Dibó, Gábor; Gombosuren, Naran

2005-03-01

String synthesis [1-3] is an efficient and cheap manual method for preparation of combinatorial libraries by using macroscopic solid support units. Sorting the units between two synthetic steps is an important operation of the procedure. The software developed to guide sorting can be used only when complete combinatorial libraries are prepared. Since very often only selected components of the full libraries are needed, new software was constructed that guides sorting in preparation of non-complete combinatorial libraries. Application of the software is described in details.

Provider software buyer's guide.

PubMed

1994-03-01

To help long term care providers find new ways to improve quality of care and efficiency, Provider magazine presents the fourth annual listing of software firms marketing computer programs for all areas of nursing facility operations. On the following five pages, more than 80 software firms display their wares, with programs such as minimum data set and care planning, dietary, accounting and financials, case mix, and medication administration records. The guide also charts compatible hardware, integration ability, telephone numbers, company contacts, and easy-to-use reader service numbers.

5th Annual Provider Software Buyer's Guide.

PubMed

1995-03-01

To help long term care providers find new ways to improve quality of care and efficiency, PROVIDER presents the fifth annual listing of software firms marketing computer programs for all areas of long term care operations. On the following five pages, more than 70 software firms display their wares, with programs such as minimum data set and care planning, dietary, accounting and financials, case mix, and medication administration records. The guide also charts compatible hardware, integration ability, telephone numbers, company contacts, and easy-to-use reader service numbers.

Provider software buyer's guide.

PubMed

1993-03-01

To help long term care providers find new ways to improve quality of care and efficiency. Provider magazine presents the third annual listing of software firms marketing computer programs for all areas of nursing facility operations. On the following five pages, more than 80 software firms display their wares, with programs such as minimum data set and care planning, dietary, accounting and financials, case mix, and medication administration records. The guide also charts compatible hardware, integration ability, telephone numbers, company contacts, and easy-to-use reader service numbers.

Automated Shirt Collar Manufacturing. Volume 3. Sewing Head Control for High Speed Stitch Contour Tracking.

DTIC Science & Technology

1993-06-23

mal control scheme sums the cost function for all data points from time zero to infinity; however, the preview case sums only through the preview step...shaft speed that is generated by the monitor port on the servo amplifiers. Therefore, the zero frequency gain shown in the figure contains the gain...Delivery Order 0014 SAOORESS (City, State, and ZIP Code ) 10. SOURCE OF FUNDING NUMBERS Rom415CmrnSainPROGRAM IPROJECT TASK WORK UNITAlexandriaR VA 22304-6100

Recent Improvements in the FDNS CFD Code and its Associated Process

NASA Technical Reports Server (NTRS)

West, Jeff S.; Dorney, Suzanne M.; Turner, Jim (Technical Monitor)

2002-01-01

This viewgraph presentation gives an overview on recent improvements in the Finite Difference Navier Stokes (FDNS) computational fluid dynamics (CFD) code and its associated process. The development of a utility, PreViewer, has essentially eliminated the creeping of simple human error into the FDNS Solution process. Extension of PreViewer to encapsulate the Domain Decompression process has made practical the routine use of parallel processing. The combination of CVS source control and ATS consistency validation significantly increases the efficiency of the CFD process.

Asymmetric coding of categorical spatial relations in both language and vision.

PubMed

Roth, J C; Franconeri, S L

2012-01-01

Describing certain types of spatial relationships between a pair of objects requires that the objects are assigned different "roles" in the relation, e.g., "A is above B" is different than "B is above A." This asymmetric representation places one object in the "target" or "figure" role and the other in the "reference" or "ground" role. Here we provide evidence that this asymmetry may be present not just in spatial language, but also in perceptual representations. More specifically, we describe a model of visual spatial relationship judgment where the designation of the target object within such a spatial relationship is guided by the location of the "spotlight" of attention. To demonstrate the existence of this perceptual asymmetry, we cued attention to one object within a pair by briefly previewing it, and showed that participants were faster to verify the depicted relation when that object was the linguistic target. Experiment 1 demonstrated this effect for left-right relations, and Experiment 2 for above-below relations. These results join several other types of demonstrations in suggesting that perceptual representations of some spatial relations may be asymmetrically coded, and further suggest that the location of selective attention may serve as the mechanism that guides this asymmetry.

A Stable Whole Building Performance Method for Standard 90.1-Part II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, Michael I.; Eley, Charles

2016-06-01

In May of 2013 we introduced a new approach for compliance with Standard 90.1 that was under development based on the Performance Rating Method of Appendix G to Standard 90.11. Since then, the approach has been finalized through Addendum BM to Standard 90.1-2013 and will be published in the 2016 edition of the Standard. In the meantime, ASHRAE has published an advanced copy of Appendix G including Addendum BM and several other addenda so that software developers and energy program administrators can get a preview of what is coming in the 2016 edition of the Standard2. This article is anmore » update on Addendum BM, summarizes changes made to the original concept as introduced in May of 2013, and provides an approach for developing performance targets for code compliance and beyond code programs.« less

A Legal Guide for the Software Developer.

ERIC Educational Resources Information Center

Minnesota Small Business Assistance Office, St. Paul.

This booklet has been prepared to familiarize the inventor, creator, or developer of a new computer software product or software invention with the basic legal issues involved in developing, protecting, and distributing the software in the United States. Basic types of software protection and related legal matters are discussed in detail,…

78 FR 47015 - Software Requirement Specifications for Digital Computer Software Used in Safety Systems of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Software Requirement Specifications for Digital Computer Software Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear Regulatory Commission... issuing a revised regulatory guide (RG), revision 1 of RG 1.172, ``Software Requirement Specifications for...

A Flexible Method for Producing F.E.M. Analysis of Bone Using Open-Source Software

NASA Technical Reports Server (NTRS)

Boppana, Abhishektha; Sefcik, Ryan; Meyers, Jerry G.; Lewandowski, Beth E.

2016-01-01

This project, performed in support of the NASA GRC Space Academy summer program, sought to develop an open-source workflow methodology that segmented medical image data, created a 3D model from the segmented data, and prepared the model for finite-element analysis. In an initial step, a technological survey evaluated the performance of various existing open-source software that claim to perform these tasks. However, the survey concluded that no single software exhibited the wide array of functionality required for the potential NASA application in the area of bone, muscle and bio fluidic studies. As a result, development of a series of Python scripts provided the bridging mechanism to address the shortcomings of the available open source tools. The implementation of the VTK library provided the most quick and effective means of segmenting regions of interest from the medical images; it allowed for the export of a 3D model by using the marching cubes algorithm to build a surface mesh. To facilitate the development of the model domain from this extracted information required a surface mesh to be processed in the open-source software packages Blender and Gmsh. The Preview program of the FEBio suite proved to be sufficient for volume filling the model with an unstructured mesh and preparing boundaries specifications for finite element analysis. To fully allow FEM modeling, an in house developed Python script allowed assignment of material properties on an element by element basis by performing a weighted interpolation of voxel intensity of the parent medical image correlated to published information of image intensity to material properties, such as ash density. A graphical user interface combined the Python scripts and other software into a user friendly interface. The work using Python scripts provides a potential alternative to expensive commercial software and inadequate, limited open-source freeware programs for the creation of 3D computational models. More work will be needed to validate this approach in creating finite-element models.

COATING ALTERNATIVES GUIDE (CAGE) USER'S GUIDE (EPA/600/R-01/030)

EPA Science Inventory

The guide provides instructions for using the Coating Alternatives GuidE (CAGE) software program, version 1.0. It assumes that the user is familiar with the fundamentals of operating an IBM-compatible personal computer (PC) under the Microsoft disk operating system (MS-DOS). CAGE...

Certification Processes for Safety-Critical and Mission-Critical Aerospace Software

NASA Technical Reports Server (NTRS)

Nelson, Stacy

2003-01-01

This document is a quick reference guide with an overview of the processes required to certify safety-critical and mission-critical flight software at selected NASA centers and the FAA. Researchers and software developers can use this guide to jumpstart their understanding of how to get new or enhanced software onboard an aircraft or spacecraft. The introduction contains aerospace industry definitions of safety and safety-critical software, as well as, the current rationale for certification of safety-critical software. The Standards for Safety-Critical Aerospace Software section lists and describes current standards including NASA standards and RTCA DO-178B. The Mission-Critical versus Safety-Critical software section explains the difference between two important classes of software: safety-critical software involving the potential for loss of life due to software failure and mission-critical software involving the potential for aborting a mission due to software failure. The DO-178B Safety-critical Certification Requirements section describes special processes and methods required to obtain a safety-critical certification for aerospace software flying on vehicles under auspices of the FAA. The final two sections give an overview of the certification process used at Dryden Flight Research Center and the approval process at the Jet Propulsion Lab (JPL).

Character order processing in Chinese reading.

PubMed

Gu, Junjuan; Li, Xingshan; Liversedge, Simon P

2015-02-01

We explored how character order information is encoded in isolated word processing or Chinese sentence reading in 2 experiments using a masked priming paradigm and a gaze-contingent display-change paradigm. The results showed that response latencies in the lexical decision task and reading times on the target word region were longer in the unrelated condition (the prime or the preview was unrelated with the target word) than the transposed-character condition (the prime or the preview was a transposition of the 2 characters of the target word), which were respectively longer than in the identity condition (the prime or preview was identical to the target word). These results show that character order is encoded at an early stage of processing in Chinese reading, but character position encoding was not strict. We also found that character order encoding was similar for single-morpheme and multiple-morpheme words, suggesting that morphemic status does not affect character order encoding. The current results represent an early contribution to our understanding of character order encoding during Chinese reading.

Robust preview control for a class of uncertain discrete-time systems with time-varying delay.

PubMed

Li, Li; Liao, Fucheng

2018-02-01

This paper proposes a concept of robust preview tracking control for uncertain discrete-time systems with time-varying delay. Firstly, a model transformation is employed for an uncertain discrete system with time-varying delay. Then, the auxiliary variables related to the system state and input are introduced to derive an augmented error system that includes future information on the reference signal. This leads to the tracking problem being transformed into a regulator problem. Finally, for the augmented error system, a sufficient condition of asymptotic stability is derived and the preview controller design method is proposed based on the scaled small gain theorem and linear matrix inequality (LMI) technique. The method proposed in this paper not only solves the difficulty problem of applying the difference operator to the time-varying matrices but also simplifies the structure of the augmented error system. The numerical simulation example also illustrates the effectiveness of the results presented in the paper. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Exploring the repetition bias in voluntary task switching.

PubMed

Mittelstädt, Victor; Dignath, David; Schmidt-Ott, Magdalena; Kiesel, Andrea

2018-01-01

In the voluntary task-switching paradigm, participants are required to randomly select tasks. We reasoned that the consistent finding of a repetition bias (i.e., participants repeat tasks more often than expected by chance) reflects reasonable adaptive task selection behavior to balance the goal of random task selection with the goals to minimize the time and effort for task performance. We conducted two experiments in which participants were provided with variable amount of preview for the non-chosen task stimuli (i.e., potential switch stimuli). We assumed that switch stimuli would initiate some pre-processing resulting in improved performance in switch trials. Results showed that reduced switch costs due to extra-preview in advance of each trial were accompanied by more task switches. This finding is in line with the characteristics of rational adaptive behavior. However, participants were not biased to switch tasks more often than chance despite large switch benefits. We suggest that participants might avoid effortful additional control processes that modulate the effects of preview on task performance and task choice.

How To Select an Event Management System: A Guide to Selecting the Most Effective Resource Management System for College Union and Student Activities Professionals.

ERIC Educational Resources Information Center

Anderson, Scott; Raasch, Kevin

2002-01-01

Provides an evaluation template for student activities professionals charged with evaluating competitive event scheduling software. Guides staff in making an informed decision on whether to retain event management technology provided through an existing vendor or choose "best-of-breed" scheduling software. (EV)

Designing Tracking Software for Image-Guided Surgery Applications: IGSTK Experience

PubMed Central

Enquobahrie, Andinet; Gobbi, David; Turek, Matt; Cheng, Patrick; Yaniv, Ziv; Lindseth, Frank; Cleary, Kevin

2009-01-01

Objective Many image-guided surgery applications require tracking devices as part of their core functionality. The Image-Guided Surgery Toolkit (IGSTK) was designed and developed to interface tracking devices with software applications incorporating medical images. Methods IGSTK was designed as an open source C++ library that provides the basic components needed for fast prototyping and development of image-guided surgery applications. This library follows a component-based architecture with several components designed for specific sets of image-guided surgery functions. At the core of the toolkit is the tracker component that handles communication between a control computer and navigation device to gather pose measurements of surgical instruments present in the surgical scene. The representations of the tracked instruments are superimposed on anatomical images to provide visual feedback to the clinician during surgical procedures. Results The initial version of the IGSTK toolkit has been released in the public domain and several trackers are supported. The toolkit and related information are available at www.igstk.org. Conclusion With the increased popularity of minimally invasive procedures in health care, several tracking devices have been developed for medical applications. Designing and implementing high-quality and safe software to handle these different types of trackers in a common framework is a challenging task. It requires establishing key software design principles that emphasize abstraction, extensibility, reusability, fault-tolerance, and portability. IGSTK is an open source library that satisfies these needs for the image-guided surgery community. PMID:20037671

GSOSTATS Database: USAF Synchronous Satellite Catalog Data Conversion Software. User's Guide and Software Maintenance Manual, Version 2.1

NASA Technical Reports Server (NTRS)

Mallasch, Paul G.; Babic, Slavoljub

1994-01-01

The United States Air Force (USAF) provides NASA Lewis Research Center with monthly reports containing the Synchronous Satellite Catalog and the associated Two Line Mean Element Sets. The USAF Synchronous Satellite Catalog supplies satellite orbital parameters collected by an automated monitoring system and provided to Lewis Research Center as text files on magnetic tape. Software was developed to facilitate automated formatting, data normalization, cross-referencing, and error correction of Synchronous Satellite Catalog files before loading into the NASA Geosynchronous Satellite Orbital Statistics Database System (GSOSTATS). This document contains the User's Guide and Software Maintenance Manual with information necessary for installation, initialization, start-up, operation, error recovery, and termination of the software application. It also contains implementation details, modification aids, and software source code adaptations for use in future revisions.

Evaluation of Agricultural Accounting Software. Improved Decision Making. Third Edition.

ERIC Educational Resources Information Center

Lovell, Ashley C., Comp.

Following a discussion of the evaluation criteria for choosing accounting software, this guide contains reviews of 27 accounting software programs that could be used by farm or ranch business managers. The information in the reviews was provided by the software vendors and covers the following points for each software package: general features,…

SAGE 2.0 SOLVENT ALTERNATIVES GUIDE - USER'S GUIDE

EPA Science Inventory

The guide provides instruction for using the SAGE (Solvent Alternatives Guide) software system, version 2.O. It assumes that the user is familiar with the fundamentals of operating a personal computer under the Microsoft disk operating system (MS-DOS). AGE recommends solvent repl...

Improving the trajectory of transpedicular transdiscal lumbar screw fixation with a computer-assisted 3D-printed custom drill guide

PubMed Central

Shao, Zhen-Xuan; Wang, Jian-Shun; Lin, Zhong-Ke; Ni, Wen-Fei; Wang, Xiang-Yang

2017-01-01

Transpedicular transdiscal screw fixation is an alternative technique used in lumbar spine fixation; however, it requires an accurate screw trajectory. The aim of this study is to design a novel 3D-printed custom drill guide and investigate its accuracy to guide the trajectory of transpedicular transdiscal (TPTD) lumbar screw fixation. Dicom images of thirty lumbar functional segment units (FSU, two segments) of L1–L4 were acquired from the PACS system in our hospital (patients who underwent a CT scan for other abdomen diseases and had normal spine anatomy) and imported into reverse design software for three-dimensional reconstructions. Images were used to print the 3D lumbar models and were imported into CAD software to design an optimal TPTD screw trajectory and a matched custom drill guide. After both the 3D printed FSU models and 3D-printed custom drill guide were prepared, the TPTD screws will be guided with a 3D-printed custom drill guide and introduced into the 3D printed FSU models. No significant statistical difference in screw trajectory angles was observed between the digital model and the 3D-printed model (P > 0.05). Our present study found that, with the help of CAD software, it is feasible to design a TPTD screw custom drill guide that could guide the accurate TPTD screw trajectory on 3D-printed lumbar models. PMID:28717599

User's guide to programming fault injection and data acquisition in the SIFT environment

NASA Technical Reports Server (NTRS)

Elks, Carl R.; Green, David F.; Palumbo, Daniel L.

1987-01-01

Described are the features, command language, and functional design of the SIFT (Software Implemented Fault Tolerance) fault injection and data acquisition interface software. The document is also intended to assist and guide the SIFT user in defining, developing, and executing SIFT fault injection experiments and the subsequent collection and reduction of that fault injection data. It is also intended to be used in conjunction with the SIFT User's Guide (NASA Technical Memorandum 86289) for reference to SIFT system commands, procedures and functions, and overall guidance in SIFT system programming.

CAD/CAM guided surgery in implant dentistry. A review of software packages and step-by-step protocols for planning surgical guides.

PubMed

Scherer, Michael D; Kattadiyil, Mathew T; Parciak, Ewa; Puri, Shweta

2014-01-01

Three-dimensional radiographic imaging for dental implant treatment planning is gaining widespread interest and popularity. However, application of the data from 30 imaging can be a complex and daunting process initially. The purpose of this article is to describe features of three software packages and the respective computerized guided surgical templates (GST) fabricated from them. A step-by-step method of interpreting and ordering a GST to simplify the process of the surgical planning and implant placement is discussed.

Lexical and sublexical semantic preview benefits in Chinese reading.

PubMed

Yan, Ming; Zhou, Wei; Shu, Hua; Kliegl, Reinhold

2012-07-01

Semantic processing from parafoveal words is an elusive phenomenon in alphabetic languages, but it has been demonstrated only for a restricted set of noncompound Chinese characters. Using the gaze-contingent boundary paradigm, this experiment examined whether parafoveal lexical and sublexical semantic information was extracted from compound preview characters. Results generalized parafoveal semantic processing to this representative set of Chinese characters and extended the parafoveal processing to radical (sublexical) level semantic information extraction. Implications for notions of parafoveal information extraction during Chinese reading are discussed. 2012 APA, all rights reserved

Open Rotor Test Status

NASA Technical Reports Server (NTRS)

VanZante, Dale E.

2010-01-01

Testing of low noise, counter-rotating open rotor propulsion concepts has been ongoing at Glenn Research Center in collaboration with General Electric Company. The presentation is an overview of the testing that has been completed to date and previews the upcoming test entries. The NASA Environmentally Responsible Aviation Project Diagnostics entry is the most recent to finish. That test entry included acoustic phased array, pressure sensitive paint, particle image velocimetry, pylon installed measurements and acoustic shielding measurements. A preview of the data to be acquired in the 8x6 high-speed wind tunnel is also included.

Implementing LibGuides 2: An Academic Case Study

ERIC Educational Resources Information Center

Duncan, Vicky; Lucky, Shannon; McLean, Jaclyn

2015-01-01

Since 1997, the University of Saskatchewan Library has used "subject pages" to highlight key library resources. When Springshare announced it was launching LibGuides v2, a project team was assembled to transition a mixture of locally produced guides and guides created with the original LibGuides v1 software. This article synthesizes best…

Federal Communications Commission (FCC) Transponder Loading Data Conversion Software. User's guide and software maintenance manual, version 1.2

NASA Technical Reports Server (NTRS)

Mallasch, Paul G.

1993-01-01

This volume contains the complete software system documentation for the Federal Communications Commission (FCC) Transponder Loading Data Conversion Software (FIX-FCC). This software was written to facilitate the formatting and conversion of FCC Transponder Occupancy (Loading) Data before it is loaded into the NASA Geosynchronous Satellite Orbital Statistics Database System (GSOSTATS). The information that FCC supplies NASA is in report form and must be converted into a form readable by the database management software used in the GSOSTATS application. Both the User's Guide and Software Maintenance Manual are contained in this document. This volume of documentation passed an independent quality assurance review and certification by the Product Assurance and Security Office of the Planning Research Corporation (PRC). The manuals were reviewed for format, content, and readability. The Software Management and Assurance Program (SMAP) life cycle and documentation standards were used in the development of this document. Accordingly, these standards were used in the review. Refer to the System/Software Test/Product Assurance Report for the Geosynchronous Satellite Orbital Statistics Database System (GSOSTATS) for additional information.

PredGuid+A: Orion Entry Guidance Modified for Aerocapture

NASA Technical Reports Server (NTRS)

Lafleur, Jarret

2013-01-01

PredGuid+A software was developed to enable a unique numerical predictor-corrector aerocapture guidance capability that builds on heritage Orion entry guidance algorithms. The software can be used for both planetary entry and aerocapture applications. Furthermore, PredGuid+A implements a new Delta-V minimization guidance option that can take the place of traditional targeting guidance and can result in substantial propellant savings. PredGuid+A allows the user to set a mode flag and input a target orbit's apoapsis and periapsis. Using bank angle control, the guidance will then guide the vehicle to the appropriate post-aerocapture orbit using one of two algorithms: Apoapsis Targeting or Delta-V Minimization (as chosen by the user). Recently, the PredGuid guidance algorithm was adapted for use in skip-entry scenarios for NASA's Orion multi-purpose crew vehicle (MPCV). To leverage flight heritage, most of Orion's entry guidance routines are adapted from the Apollo program.

Programmer's reference manual for the VAX-Gerber link software package. Revision 1. 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Isobe, G.W.

1985-10-01

This guide provides the information necessary to edit, modify, and run the VAX-Gerber software link. Since the project is in the testing stage and still being modified, this guide discussess the final desired stage along with the current stage. The current stage is to set up as to allow the programmer to easily modify and update codes as necessary.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kirby, M.J.; Kramer, S.R.; Pittard, G.T.

Jason Consultants International, Inc., under the sponsorship of the Gas Research Institute (GRI), has developed guidelines, procedures and software, which are described in this paper, for the installation of polyethylene gas pipe using guided horizontal drilling. Jason was aided in this development by two key subcontractors; Maurer Engineering who wrote the software and NICOR Technologies who reviewed the software and guidelines from a utility perspective. This program resulted in the development of commerically viable software for utilities, contractors, engineering firms, and others involved with the installation of pipes using guided horizontal drilling. The software is an interactive design tool thatmore » allows the user to enter ground elevation data, alignment information and pipe data. The software aides the engineer in designing a drill path and provides plan and profile views along with tabular data for pipe depth and surface profile. Finally, the software calculates installation loads and pipe stresses, compares these values against pipe manufacturer`s recommendations, and provides this information graphically and in tabular form. 5 refs., 18 figs., 2 tabs.« less

Are Individual Differences in Reading Speed Related to Extrafoveal Visual Acuity and Crowding?

PubMed Central

Frömer, Romy; Dimigen, Olaf; Niefind, Florian; Krause, Niels; Kliegl, Reinhold; Sommer, Werner

2015-01-01

Readers differ considerably in their speed of self-paced reading. One factor known to influence fixation durations in reading is the preprocessing of words in parafoveal vision. Here we investigated whether individual differences in reading speed or the amount of information extracted from upcoming words (the preview benefit) can be explained by basic differences in extrafoveal vision—i.e., the ability to recognize peripheral letters with or without the presence of flanking letters. Forty participants were given an adaptive test to determine their eccentricity thresholds for the identification of letters presented either in isolation (extrafoveal acuity) or flanked by other letters (crowded letter recognition). In a separate eye-tracking experiment, the same participants read lists of words from left to right, while the preview of the upcoming words was manipulated with the gaze-contingent moving window technique. Relationships between dependent measures were analyzed on the observational level and with linear mixed models. We obtained highly reliable estimates both for extrafoveal letter identification (acuity and crowding) and measures of reading speed (overall reading speed, size of preview benefit). Reading speed was higher in participants with larger uncrowded windows. However, the strength of this relationship was moderate and it was only observed if other sources of variance in reading speed (e.g., the occurrence of regressive saccades) were eliminated. Moreover, the size of the preview benefit—an important factor in normal reading—was larger in participants with better extrafoveal acuity. Together, these results indicate a significant albeit moderate contribution of extrafoveal vision to individual differences in reading speed. PMID:25789812

AF-Shell 1.0 User Guide

NASA Technical Reports Server (NTRS)

McElroy, Mark W.

2017-01-01

This document serves as a user guide for the AF-Shell 1.0 software, an efficient tool for progressive damage simulation in composite laminates. This guide contains minimal technical material and is meant solely as a guide for a new user to apply AF-Shell 1.0 to laminate damage simulation problems.

Orthographic and phonological preview benefits: parafoveal processing in skilled and less-skilled deaf readers.

PubMed

Bélanger, Nathalie N; Mayberry, Rachel I; Rayner, Keith

2013-01-01

Many deaf individuals do not develop the high-level reading skills that will allow them to fully take part into society. To attempt to explain this widespread difficulty in the deaf population, much research has honed in on the use of phonological codes during reading. The hypothesis that the use of phonological codes is associated with good reading skills in deaf readers, though not well supported, still lingers in the literature. We investigated skilled and less-skilled adult deaf readers' processing of orthographic and phonological codes in parafoveal vision during reading by monitoring their eye movements and using the boundary paradigm. Orthographic preview benefits were found in early measures of reading for skilled hearing, skilled deaf, and less-skilled deaf readers, but only skilled hearing readers processed phonological codes in parafoveal vision. Crucially, skilled and less-skilled deaf readers showed a very similar pattern of preview benefits during reading. These results support the notion that reading difficulties in deaf adults are not linked to their failure to activate phonological codes during reading.

Streamlining Building Efficiency Evaluation with DOE's Asset Score Preview

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goel, Supriya; Wang, Nora; Gonzalez, Juan

2016-08-26

Building Energy Asset Score (Asset Score), developed by the Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy (DOE), is a tool to help building owners and managers assess the efficiency of a building's energy-related systems and encourage investment in cost-effective improvements. The Asset Score uses an EnergyPlus model to provide a quick assessment of building energy performance with minimum user inputs of building characteristics and identifies upgrade opportunities. Even with a reduced set of user inputs, data collection remains a challenge for wide-spread adoption, especially when evaluating a large number of buildings. To address this, Asset Scoremore » Preview was developed to allow users to enter as few as seven building characteristics to quickly assess their buildings before a more in-depth analysis. A streamlined assessment from Preview to full Asset Score provides an easy entry point and also enables users who manage a large number of buildings to screen and prioritize buildings that can benefit most from a more detailed evaluation and possible energy efficiency upgrades without intensive data collection.« less

78 FR 47012 - Developing Software Life Cycle Processes Used in Safety Systems of Nuclear Power Plants

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Developing Software Life Cycle Processes Used in... revised regulatory guide (RG), revision 1 of RG 1.173, ``Developing Software Life Cycle Processes for... Developing a Software Project Life Cycle Process,'' issued 2006, with the clarifications and exceptions as...

Advanced communications technology satellite high burst rate link evaluation terminal experiment control and monitor software user's guide, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1992-01-01

The Experiment Control and Monitor (EC&M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC&M software is one segment of the Control and Performance Monitoring (C&PM) software system of the HBR-LET. The EC&M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C&PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC&M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC&M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document.

Federal Emergency Management Information System (FEMIS) system administration guide. Version 1.2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burford, M.J.; Burnett, R.A.; Curtis, L.M.

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and analysis tool that is being developed under the direction of the US Army Chemical biological Defense Command. The FEMIS System Administration Guide defines FEMIS hardware and software requirements and gives instructions for installing the FEMIS system package. System administrators, database administrators, and general users can use this guide to install, configure, and maintain the FEMIS client software package. This document provides a description of the FEMIS environment; distribution media; data, communications, and electronic mail servers; user workstations; and system management.

Data Strategies to Support Automated Multi-Sensor Data Fusion in a Service Oriented Architecture

DTIC Science & Technology

2008-06-01

and employ vast quantities of content. This dissertation provides two software architectural patterns and an auto-fusion process that guide the...UDDI), Simple Order Access Protocol (SOAP), Java, Maritime Domain Awareness (MDA), Business Process Execution Language for Web Service (BPEL4WS) 16...content. This dissertation provides two software architectural patterns and an auto-fusion process that guide the development of a distributed

Overconfidence, preview, and probability in strategic planning

NASA Technical Reports Server (NTRS)

Wickens, Christopher D.; Pizarro, David; Bell, Brian

1991-01-01

The performance of eight subjects in a 'rescue' video game requiring choices as to which node they should fly to in order to rescue the simulated casualties is presently studied with a view to biases and display support criteria in strategic planning. After each choice, the subjects needed to fly a challenging tracking dynamic along a path to reach the next node. The results obtained indicate that the choices of the subjects were less optimal when full preview was offered, perhaps due to subjects' reliance on the simple strategy of choosing routes with the greatest number of casualties.

Equasions for Curriculum Improvement.

ERIC Educational Resources Information Center

Eckenrod, James S.

1986-01-01

Describes the Technology in Curriculum (TIC) program resource guides which will be distributed to California schools in the fall of 1986. These guides match available instructional television programs and computer software to existing California curriculum guides in order to facilitate teachers' classroom use. (JDH)

Use of a quality improvement tool, the prioritization matrix, to identify and prioritize triage software algorithm enhancement.

PubMed

North, Frederick; Varkey, Prathiba; Caraballo, Pedro; Vsetecka, Darlene; Bartel, Greg

2007-10-11

Complex decision support software can require significant effort in maintenance and enhancement. A quality improvement tool, the prioritization matrix, was successfully used to guide software enhancement of algorithms in a symptom assessment call center.

Motion compensation for MRI-compatible patient-mounted needle guide device: estimation of targeting accuracy in MRI-guided kidney cryoablations

NASA Astrophysics Data System (ADS)

Tokuda, Junichi; Chauvin, Laurent; Ninni, Brian; Kato, Takahisa; King, Franklin; Tuncali, Kemal; Hata, Nobuhiko

2018-04-01

Patient-mounted needle guide devices for percutaneous ablation are vulnerable to patient motion. The objective of this study is to develop and evaluate a software system for an MRI-compatible patient-mounted needle guide device that can adaptively compensate for displacement of the device due to patient motion using a novel image-based automatic device-to-image registration technique. We have developed a software system for an MRI-compatible patient-mounted needle guide device for percutaneous ablation. It features fully-automated image-based device-to-image registration to track the device position, and a device controller to adjust the needle trajectory to compensate for the displacement of the device. We performed: (a) a phantom study using a clinical MR scanner to evaluate registration performance; (b) simulations using intraoperative time-series MR data acquired in 20 clinical cases of MRI-guided renal cryoablations to assess its impact on motion compensation; and (c) a pilot clinical study in three patients to test its feasibility during the clinical procedure. FRE, TRE, and success rate of device-to-image registration were mm, mm, and 98.3% for the phantom images. The simulation study showed that the motion compensation reduced the targeting error for needle placement from 8.2 mm to 5.4 mm (p  <  0.0005) in patients under general anesthesia (GA), and from 14.4 mm to 10.0 mm () in patients under monitored anesthesia care (MAC). The pilot study showed that the software registered the device successfully in a clinical setting. Our simulation study demonstrated that the software system could significantly improve targeting accuracy in patients treated under both MAC and GA. Intraprocedural image-based device-to-image registration was feasible.

Development and preliminary evaluation of an ultrasonic motor actuated needle guide for 3T MRI-guided transperineal prostate interventions

NASA Astrophysics Data System (ADS)

Song, Sang-Eun; Tokuda, Junichi; Tuncali, Kemal; Tempany, Clare; Hata, Nobuhiko

2012-02-01

Image guided prostate interventions have been accelerated by Magnetic Resonance Imaging (MRI) and robotic technologies in the past few years. However, transrectal ultrasound (TRUS) guided procedure still remains as vast majority in clinical practice due to engineering and clinical complexity of the MRI-guided robotic interventions. Subsequently, great advantages and increasing availability of MRI have not been utilized at its maximum capacity in clinic. To benefit patients from the advantages of MRI, we developed an MRI-compatible motorized needle guide device "Smart Template" that resembles a conventional prostate template to perform MRI-guided prostate interventions with minimal changes in the clinical procedure. The requirements and specifications of the Smart Template were identified from our latest MRI-guided intervention system that has been clinically used in manual mode for prostate biopsy. Smart Template consists of vertical and horizontal crossbars that are driven by two ultrasonic motors via timing-belt and mitergear transmissions. Navigation software that controls the crossbar position to provide needle insertion positions was also developed. The software can be operated independently or interactively with an open-source navigation software, 3D Slicer, that has been developed for prostate intervention. As preliminary evaluation, MRI distortion and SNR test were conducted. Significant MRI distortion was found close to the threaded brass alloy components of the template. However, the affected volume was limited outside the clinical region of interest. SNR values over routine MRI scan sequences for prostate biopsy indicated insignificant image degradation during the presence of the robotic system and actuation of the ultrasonic motors.

OpenEIS. Users Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Woohyun; Lutes, Robert G.; Katipamula, Srinivas

This document is a users guide for OpenEIS, a software code designed to provide standard methods for authoring, sharing, testing, using and improving algorithms for operational building energy efficiency.

How the viewing of familiar landscapes prior to release allows pigeons to home faster: evidence from GPS tracking.

PubMed

Biro, Dora; Guilford, Tim; Dell'Omo, Giacomo; Lipp, Hans-Peter

2002-12-01

Providing homing pigeons with a 5 min preview of the landscape at familiar sites prior to release reliably improves the birds' subsequent homing speeds. This phenomenon has been taken to suggest that the visual panorama is involved in familiar-site recognition, yet the exact nature of the improvement has never been elucidated. We employed newly developed miniature Global Positioning System (GPS) tracking technology to investigate how access to visual cues prior to release affects pigeons' flight along the length of the homing route. By applying a variety of novel analytical techniques enabled by the high-resolution GPS data (track efficiency, virtual vanishing bearings, orientation threshold), we localised the preview effect to the first 1000 m of the journey. Birds denied preview of a familiar landscape for 5 min before take-off flew an initially more tortuous path, including a high incidence of circling, possibly as part of an information-gathering strategy to determine their position. Beyond the first 1000 m, no differences were found in the performance of birds with or without preview. That the effect of the visual treatment was evident only in the early part of the journey suggests that lack of access to visual cues prior to release does not result in a non-specific effect on behaviour that is maintained throughout the flight. Instead, it seems that at least some decisions regarding the direction of home can be made prior to release and that such decisions are delayed if visual access to the landscape is denied. Overall, the variety of approaches applied here clearly highlight the potential for future applications of GPS tracking technology in navigation studies.

Core Logistics Capability Policy Applied to USAF Combat Aircraft Avionics Software: A Systems Engineering Analysis

DTIC Science & Technology

2010-06-01

cannot make a distinction between software maintenance and development” (Sharma, 2004). ISO /IEC 12207 Software Lifecycle Processes offers a guide to...synopsis of ISO /IEC 12207 , Raghu Singh of the Federal Aviation Administration states “Whenever a software product needs modifications, the development...Corporation. Singh, R. (1998). International Standard ISO /IEC 12207 Software Life Cycle Processes. Washington: Federal Aviation Administration. The Joint

Transportation systems safety hazard analysis tool (SafetyHAT) user guide (version 1.0)

DOT National Transportation Integrated Search

2014-03-24

This is a user guide for the transportation system Safety Hazard Analysis Tool (SafetyHAT) Version 1.0. SafetyHAT is a software tool that facilitates System Theoretic Process Analysis (STPA.) This user guide provides instructions on how to download, ...

User’s guide for MapMark4—An R package for the probability calculations in three-part mineral resource assessments

USGS Publications Warehouse

Ellefsen, Karl J.

2017-06-27

MapMark4 is a software package that implements the probability calculations in three-part mineral resource assessments. Functions within the software package are written in the R statistical programming language. These functions, their documentation, and a copy of this user’s guide are bundled together in R’s unit of shareable code, which is called a “package.” This user’s guide includes step-by-step instructions showing how the functions are used to carry out the probability calculations. The calculations are demonstrated using test data, which are included in the package.

APEX - the Hyperspectral ESA Airborne Prism Experiment

PubMed Central

Itten, Klaus I.; Dell'Endice, Francesco; Hueni, Andreas; Kneubühler, Mathias; Schläpfer, Daniel; Odermatt, Daniel; Seidel, Felix; Huber, Silvia; Schopfer, Jürg; Kellenberger, Tobias; Bühler, Yves; D'Odorico, Petra; Nieke, Jens; Alberti, Edoardo; Meuleman, Koen

2008-01-01

The airborne ESA-APEX (Airborne Prism Experiment) hyperspectral mission simulator is described with its distinct specifications to provide high quality remote sensing data. The concept of an automatic calibration, performed in the Calibration Home Base (CHB) by using the Control Test Master (CTM), the In-Flight Calibration facility (IFC), quality flagging (QF) and specific processing in a dedicated Processing and Archiving Facility (PAF), and vicarious calibration experiments are presented. A preview on major applications and the corresponding development efforts to provide scientific data products up to level 2/3 to the user is presented for limnology, vegetation, aerosols, general classification routines and rapid mapping tasks. BRDF (Bidirectional Reflectance Distribution Function) issues are discussed and the spectral database SPECCHIO (Spectral Input/Output) introduced. The optical performance as well as the dedicated software utilities make APEX a state-of-the-art hyperspectral sensor, capable of (a) satisfying the needs of several research communities and (b) helping the understanding of the Earth's complex mechanisms. PMID:27873868

Use of the 3D surgical modelling technique with open-source software for mandibular fibula free flap reconstruction and its surgical guides.

PubMed

Ganry, L; Hersant, B; Quilichini, J; Leyder, P; Meningaud, J P

2017-06-01

Tridimensional (3D) surgical modelling is a necessary step to create 3D-printed surgical tools, and expensive professional software is generally needed. Open-source software are functional, reliable, updated, may be downloaded for free and used to produce 3D models. Few surgical teams have used free solutions for mastering 3D surgical modelling for reconstructive surgery with osseous free flaps. We described an Open-source software 3D surgical modelling protocol to perform a fast and nearly free mandibular reconstruction with microvascular fibula free flap and its surgical guides, with no need for engineering support. Four successive specialised Open-source software were used to perform our 3D modelling: OsiriX ® , Meshlab ® , Netfabb ® and Blender ® . Digital Imaging and Communications in Medicine (DICOM) data on patient skull and fibula, obtained with a computerised tomography (CT) scan, were needed. The 3D modelling of the reconstructed mandible and its surgical guides were created. This new strategy may improve surgical management in Oral and Craniomaxillofacial surgery. Further clinical studies are needed to demonstrate the feasibility, reproducibility, transfer of know how and benefits of this technique. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Prosthetically directed implant placement using computer software to ensure precise placement and predictable prosthetic outcomes. Part 2: rapid-prototype medical modeling and stereolithographic drilling guides requiring bone exposure.

PubMed

Rosenfeld, Alan L; Mandelaris, George A; Tardieu, Philippe B

2006-08-01

The purpose of this paper is to expand on part 1 of this series (published in the previous issue) regarding the emerging future of computer-guided implant dentistry. This article will introduce the concept of rapid-prototype medical modeling as well as describe the utilization and fabrication of computer-generated surgical drilling guides used during implant surgery. The placement of dental implants has traditionally been an intuitive process, whereby the surgeon relies on mental navigation to achieve optimal implant positioning. Through rapid-prototype medical modeling and the ste-reolithographic process, surgical drilling guides (eg, SurgiGuide) can be created. These guides are generated from a surgical implant plan created with a computer software system that incorporates all relevant prosthetic information from which the surgical plan is developed. The utilization of computer-generated planning and stereolithographically generated surgical drilling guides embraces the concept of collaborative accountability and supersedes traditional mental navigation on all levels of implant therapy.

HyRAM V1.0 User Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Groth, Katrina M.; Zumwalt, Hannah Ruth; Clark, Andrew Jordan

2016-03-01

Hydrogen Risk Assessment Models (HyRAM) is a prototype software toolkit that integrates data and methods relevant to assessing the safety of hydrogen fueling and storage infrastructure. The HyRAM toolkit integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, and characterizing the impact of hydrogen hazards, including thermal effects from jet fires and thermal pressure effects from deflagration. HyRAM version 1.0 incorporates generic probabilities for equipment failures for nine types of components, and probabilistic models for the impact of heat flux on humans and structures, with computationally and experimentally validated models of various aspects of gaseous hydrogen releasemore » and flame physics. This document provides an example of how to use HyRAM to conduct analysis of a fueling facility. This document will guide users through the software and how to enter and edit certain inputs that are specific to the user-defined facility. Description of the methodology and models contained in HyRAM is provided in [1]. This User’s Guide is intended to capture the main features of HyRAM version 1.0 (any HyRAM version numbered as 1.0.X.XXX). This user guide was created with HyRAM 1.0.1.798. Due to ongoing software development activities, newer versions of HyRAM may have differences from this guide.« less

Educational Software--New Guidelines for Development.

ERIC Educational Resources Information Center

Gold, Patricia Cohen

1984-01-01

Discusses standards developed by the Educational Computer Service of the National Education Association that incorporate technical, educational, and documentation components to guide authors in the development of quality educational software. (Author/MBR)

Aviation & Space Education: A Teacher's Resource Guide.

ERIC Educational Resources Information Center

Texas State Dept. of Aviation, Austin.

This resource guide contains information on curriculum guides, resources for teachers, computer software and computer related programs, audio/visual presentations, model aircraft and demonstration aids, training seminars and career education, and an aerospace bibliography for primary grades. Each entry includes all or some of the following items:…

Fairbanks North Star borough rural roads upgrade inventory and cost estimation software user guide : version I.

DOT National Transportation Integrated Search

2013-04-01

The Rural Road Upgrade Inventory and Cost Estimation Software is designed by the AUTC : research team to help the Fairbanks North Star Borough (FNSB) estimate the cost of upgrading : rural roads located in the Borough's Service Areas. The Software pe...

77 FR 50720 - Test Documentation for Digital Computer Software Used in Safety Systems of Nuclear Power Plants

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Test Documentation for Digital Computer Software...) is issuing for public comment draft regulatory guide (DG), DG-1207, ``Test Documentation for Digital... practices for test documentation for software and computer systems as described in the Institute of...

A Guide to Software Evaluation.

ERIC Educational Resources Information Center

Leonard, Rex; LeCroy, Barbara

Arguing that software evaluation is crucial to the quality of courseware available in a school, this paper begins by discussing reasons why microcomputers are making such a tremendous impact on education, and notes that, although the quality of software has improved over the years, the challenge for teachers to integrate computing into the…

Guide to Software Conversion Management. [Final Report.

ERIC Educational Resources Information Center

Skall, M., Ed.

Based mainly on interviews conducted at 14 federal agencies that had completed or were involved in software conversion projects, this publication provides guidelines for the entire process of software conversion. This is defined as the transformation, without functional change, of computer programs or data elements to permit their use on a…

Imprinting Community College Computer Science Education with Software Engineering Principles

ERIC Educational Resources Information Center

Hundley, Jacqueline Holliday

2012-01-01

Although the two-year curriculum guide includes coverage of all eight software engineering core topics, the computer science courses taught in Alabama community colleges limit student exposure to the programming, or coding, phase of the software development lifecycle and offer little experience in requirements analysis, design, testing, and…

Library and Classroom Use of Copyrighted Videotapes and Computer Software.

ERIC Educational Resources Information Center

Reed, Mary Hutchings; Stanek, Debra

1986-01-01

This pullout guide addresses issues regarding library use of copyrighted videotapes and computer software. Guidelines for videotapes cover in-classroom use, in-library use in public library, loan, and duplication. Guidelines for computer software cover purchase conditions, avoiding license restrictions, loaning, archival copies, and in-library and…

Future Field Programmable Gate Array (FPGA) Design Methodologies and Tool Flows

DTIC Science & Technology

2008-07-01

a) that the results are accepted by users, vendors, … and (b) that they can quantitatively explain HPC rules of thumb such as: “OpenMP is easier...in productivity that were demonstrated by traditional software systems. Using advances in software productivity as a guide , we have identified three...of this study we developed a productivity model to guide our investigation (14). Models have limitations and the model we propose is no exception

A computer simulation approach to measurement of human control strategy

NASA Technical Reports Server (NTRS)

Green, J.; Davenport, E. L.; Engler, H. F.; Sears, W. E., III

1982-01-01

Human control strategy is measured through use of a psychologically-based computer simulation which reflects a broader theory of control behavior. The simulation is called the human operator performance emulator, or HOPE. HOPE was designed to emulate control learning in a one-dimensional preview tracking task and to measure control strategy in that setting. When given a numerical representation of a track and information about current position in relation to that track, HOPE generates positions for a stick controlling the cursor to be moved along the track. In other words, HOPE generates control stick behavior corresponding to that which might be used by a person learning preview tracking.

Effects of colour on preview search: anticipatory and inhibitory biases for colour.

PubMed

Braithwaite, Jason J; Humphreys, Glyn W; Hodsoll, John

2004-01-01

Two experiments are reported examining the effects of colour grouping, colour change and target colour foreknowledge under preview search conditions (Watson and Humphreys, 1997). In Experiment 1 we manipulated the colour homogeneity of the old items at initial presentation, and the colour these items subsequently changed into. In all cases participants knew the colour of the target. We found that when the old items changed into the same colour as the new search set, search performance was affected. In Experiment 2 participants did not know the colour of the target. Here we found evidence for a negative colour-based carry-over effect that slowed search for new targets carrying the colour of the old items. This occurred even when the old items changed their original colour and the new target was a singleton. Collectively the results suggest an important role for both colour grouping and colour-based inhibition in the successful rejection of old distractors. The consequence of this, however, is that new stimuli that may carry the critical attribute may take longer to detect. We discuss the results in relation to prior 'feature-blind' accounts of preview effects on visual search.

Effects of visual span on reading speed and parafoveal processing in eye movements during sentence reading.

PubMed

Risse, Sarah

2014-07-15

The visual span (or ‘‘uncrowded window’’), which limits the sensory information on each fixation, has been shown to determine reading speed in tasks involving rapid serial visual presentation of single words. The present study investigated whether this is also true for fixation durations during sentence reading when all words are presented at the same time and parafoveal preview of words prior to fixation typically reduces later word-recognition times. If so, a larger visual span may allow more efficient parafoveal processing and thus faster reading. In order to test this hypothesis, visual span profiles (VSPs) were collected from 60 participants and related to data from an eye-tracking reading experiment. The results confirmed a positive relationship between the readers’ VSPs and fixation-based reading speed. However, this relationship was not determined by parafoveal processing. There was no evidence that individual differences in VSPs predicted differences in parafoveal preview benefit. Nevertheless, preview benefit correlated with reading speed, suggesting an independent effect on oculomotor control during reading. In summary, the present results indicate a more complex relationship between the visual span, parafoveal processing, and reading speed than initially assumed. © 2014 ARVO.

Advanced Communications Technology Satellite high burst rate link evaluation terminal experiment control and monitor software maintenance manual, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1992-01-01

The Experiment Control and Monitor (EC&M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC&M software is one segment of the Control and Performance Monitoring (C&PM) software system of the HBR-LET. The EC&M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C&PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC&M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC&M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document. The EC&M Software Maintenance Manual, Version 1.0 (NASA-CR-189161) is a programmer's guide that describes current implementation of the EC&M software from a technical perspective. An overview of the EC&M software, computer algorithms, format representation, and computer hardware configuration are included in the manual.

The automatic neutron guide optimizer guide_bot

NASA Astrophysics Data System (ADS)

Bertelsen, Mads

2017-09-01

The guide optimization software guide_bot is introduced, the main purpose of which is to reduce the time spent programming when performing numerical optimization of neutron guides. A limited amount of information on the overall guide geometry and a figure of merit describing the desired beam is used to generate the code necessary to solve the problem. A generated McStas instrument file performs the Monte Carlo ray-tracing, which is controlled by iFit optimization scripts. The resulting optimal guide is thoroughly characterized, both in terms of brilliance transfer from an idealized source and on a more realistic source such as the ESS Butterfly moderator. Basic MATLAB knowledge is required from the user, but no experience with McStas or iFit is necessary. This paper briefly describes how guide_bot is used and some important aspects of the code. A short validation against earlier work is performed which shows the expected agreement. In addition a scan over the vertical divergence requirement, where individual guide optimizations are performed for each corresponding figure of merit, provides valuable data on the consequences of this parameter. The guide_bot software package is best suited for the start of an instrument design project as it excels at comparing a large amount of different guide alternatives for a specific set of instrument requirements, but is still applicable in later stages as constraints can be used to optimize more specific guides.

Mechanistic-empirical Pavement Design Guide Implementation

DOT National Transportation Integrated Search

2010-06-01

The recently introduced Mechanistic-Empirical Pavement Design Guide (MEPDG) and associated computer software provides a state-of-practice mechanistic-empirical highway pavement design methodology. The MEPDG methodology is based on pavement responses ...

Application Processing, 2003-2004. EDExpress Training. Participant Guide.

ERIC Educational Resources Information Center

Office of Student Financial Assistance (ED), Washington, DC.

This participant guide contains training materials for processing applications for student financial aid under the EDExpress system. Representatives of institutions of higher education receive training in the use of EDExpress software that allows the school to manage student financial aid records. The guide contains these sessions: (1) welcome and…

Using Software: A Guide to the Ethical and Legal Use of Software for Members of the Academic Community.

ERIC Educational Resources Information Center

Interuniversity Communications Council (EDUCOM), Washington, DC.

The purpose of this brochure, which was produced as a service to the academic community, is to provide a brief outline of what can and cannot be done legally with software, and to clarify the implications and restrictions of the U.S. Copyright Law. Relevant facts concerning copying software precede the EDUCOM statement of principle on intellectual…

ITS/operations resource guide 2007

DOT National Transportation Integrated Search

2007-01-01

The U.S. Department of Transportations (U.S. DOTs) ITS/Operations Resource Guide 2007 is a comprehensive listing of over 400 documents, videos, websites, training courses, software tools, and points of contact related to intelligent transportat...

Propulsion Diagnostic Method Evaluation Strategy (ProDiMES) User's Guide

NASA Technical Reports Server (NTRS)

Simon, Donald L.

2010-01-01

This report is a User's Guide for the Propulsion Diagnostic Method Evaluation Strategy (ProDiMES). ProDiMES is a standard benchmarking problem and a set of evaluation metrics to enable the comparison of candidate aircraft engine gas path diagnostic methods. This Matlab (The Mathworks, Inc.) based software tool enables users to independently develop and evaluate diagnostic methods. Additionally, a set of blind test case data is also distributed as part of the software. This will enable the side-by-side comparison of diagnostic approaches developed by multiple users. The Users Guide describes the various components of ProDiMES, and provides instructions for the installation and operation of the tool.

User’s guide for GcClust—An R package for clustering of regional geochemical data

USGS Publications Warehouse

Ellefsen, Karl J.; Smith, David B.

2016-04-08

GcClust is a software package developed by the U.S. Geological Survey for statistical clustering of regional geochemical data, and similar data such as regional mineralogical data. Functions within the software package are written in the R statistical programming language. These functions, their documentation, and a copy of the user’s guide are bundled together in R’s unit of sharable code, which is called a “package.” The user’s guide includes step-by-step instructions showing how the functions are used to cluster data and to evaluate the clustering results. These functions are demonstrated in this report using test data, which are included in the package.

Design and assessment of compact optical systems towards special effects imaging

NASA Astrophysics Data System (ADS)

Shaoulov, Vesselin Iossifov

A main challenge in the field of special effects is to create special effects in real time in a way that the user can preview the effect before taking the actual picture or movie sequence. There are many techniques currently used to create computer-simulated special effects, however current techniques in computer graphics do not provide the option for the creation of real-time texture synthesis. Thus, while computer graphics is a powerful tool in the field of special effects, it is neither portable nor does it provide work in real-time capabilities. Real-time special effects may, however, be created optically. Such approach will provide not only real-time image processing at the speed of light but also a preview option, allowing the user or the artist to preview the effect on various parts of the object in order to optimize the outcome. The work presented in this dissertation was inspired by the idea of optically created special effects, such as painterly effects, encoded in images captured by photographic or motion picture cameras. As part of the presented work, compact relay optics was assessed, developed, and a working prototype was built. It was concluded that even though compact relay optics can be achieved, further push for compactness and cost-effectiveness was impossible in the paradigm of bulk macro-optics systems. Thus, a paradigm for imaging with multi-aperture micro-optics was proposed and demonstrated for the first time, which constitutes one of the key contributions of this work. This new paradigm was further extended to the most general case of magnifying multi-aperture micro-optical systems. Such paradigm allows an extreme reduction in size of the imaging optics by a factor of about 10 and a reduction in weight by a factor of about 500. Furthermore, an experimental quantification of the feasibility of optically created special effects was completed, and consequently raytracing software was developed, which was later commercialized by SmARTLens(TM). While the art forms created via raytracing were powerful, they did not predict all effects acquired experimentally. Thus, finally, as key contribution of this work, the principles of scalar diffraction theory were applied to optical imaging of extended objects under quasi-monochromatic incoherent illumination in order to provide a path to more accurately model the proposed optical imaging process for special effects obtained in the hardware. The existing theoretical framework was generalized to non-paraxial in- and out-of-focus imaging and results were obtained to verify the generalized framework. In the generalized non-paraxial framework, even the most complex linear systems, without any assumptions for shift invariance, can be modeled and analyzed.

Software for Middle School Physical Science.

ERIC Educational Resources Information Center

Podany, Zita

This final report in the MicroSIFT series reviews 10 software packages that deal mainly with the areas of electricity, magnetism, and heat energy. Software titles appearing in this report were selected because they were judged to be exemplary according to various criteria in the MicroSIFT Evaluator's Guide, with some additions to address science…

USER'S GUIDE: Strategic Waste Minimization Initiative (SWAMI) Version 2.0 - A Software Tool to Aid in Process Analysis for Pollution Prevention

EPA Science Inventory

The Strategic WAste Minimization Initiative (SWAMI) Software, Version 2.0 is a tool for using process analysis for identifying waste minimization opportunities within an industrial setting. The software requires user-supplied information for process definition, as well as materia...

An Agile Constructionist Mentoring Methodology for Software Projects in the High School

ERIC Educational Resources Information Center

Meerbaum-Salant, Orni; Hazzan, Orit

2010-01-01

This article describes the construction process and evaluation of the Agile Constructionist Mentoring Methodology (ACMM), a mentoring method for guiding software development projects in the high school. The need for such a methodology has arisen due to the complexity of mentoring software project development in the high school. We introduce the…

User Studies: Developing Learning Strategy Tool Software for Children.

ERIC Educational Resources Information Center

Fitzgerald, Gail E.; Koury, Kevin A.; Peng, Hsinyi

This paper is a report of user studies for developing learning strategy tool software for children. The prototype software demonstrated is designed for children with learning and behavioral disabilities. The tools consist of easy-to-use templates for creating organizational, memory, and learning approach guides for use in classrooms and at home.…

Surfing for Social Studies Software: A Practical Guide to Locating and Selecting Resources on the Internet.

ERIC Educational Resources Information Center

Foster, Stuart J.; Hoge, John

1997-01-01

Reviews a list of seven Web sites that provide extensive information on software available from educational agencies or companies specializing in media products. Recommends 15 social studies software programs covering a variety of topics including the Mayan civilization, Abraham Lincoln, and the Vietnam War. (MJP)

Framework programmable platform for the advanced software development workstation. Integration mechanism design document

NASA Technical Reports Server (NTRS)

Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Reddy, Uday; Ackley, Keith; Futrell, Mike

1991-01-01

The Framework Programmable Software Development Platform (FPP) is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software development environment. Guided by this model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated.

Advanced software development workstation project ACCESS user's guide

NASA Technical Reports Server (NTRS)

1990-01-01

ACCESS is a knowledge based software information system designed to assist the user in modifying retrieved software to satisfy user specifications. A user's guide is presented for the knowledge engineer who wishes to create for ACCESS a knowledge base consisting of representations of objects in some software system. This knowledge is accessible to an end user who wishes to use the catalogued software objects to create a new application program or an input stream for an existing system. The application specific portion of an ACCESS knowledge base consists of a taxonomy of object classes, as well as instances of these classes. All objects in the knowledge base are stored in an associative memory. ACCESS provides a standard interface for the end user to browse and modify objects. In addition, the interface can be customized by the addition of application specific data entry forms and by specification of display order for the taxonomy and object attributes. These customization options are described.

Large area crop inventory experiment crop assessment subsystem software requirements document

NASA Technical Reports Server (NTRS)

1975-01-01

The functional data processing requirements are described for the Crop Assessment Subsystem of the Large Area Crop Inventory Experiment. These requirements are used as a guide for software development and implementation.

AOIPS 3 User's guide. Volume 1: Overview and software utilization

NASA Technical Reports Server (NTRS)

Schotz, S. S.; Negri, A. J.; Robinson, W.

1989-01-01

This is Volume I of the Atmospheric and Oceanographic Information Processing System (AOIPS) User's Guide. AOIPS 3 is the version of the AOIPS software as of April 1989. The AOIPS software was developed jointly by the Goddard Space Flight Center and General Sciences Corporation. Volume 1 is intended to provide the user with an overall guide to the AOIPS system. It introduces the user to AOIPS system concepts, explains how programs are related and the necessary order of program execution, and provides brief descriptions derived from on-line help for every AOIPS program. It is intended to serve as a reference for information such as: program function, inmput/output variable descriptions, program limitations, etc. AOIPS is an interactive meteorological processing system with capabilities to ingest and analyze the many types of meteorological data. AOIPS includes several applications in areas of relevance to meteorological research. AOIPS is partitioned into four applications components: satellite data analysis, radar data analysis, aircraft data analysis, and utilities.

User's Guide for SKETCH

NASA Technical Reports Server (NTRS)

Hedgley, David R., Jr.

2000-01-01

A user's guide for the computer program SKETCH is presented on this disk. SKETCH solves a popular problem in computer graphics-the removal of hidden lines from images of solid objects. Examples and illustrations are included in the guide. Also included is the SKETCH program, so a user can incorporate the information into a particular software system.

Microcomputers: Communication Software. Evaluation Guides. Guide Number 13.

ERIC Educational Resources Information Center

Gray, Peter J.

This guide discusses four types of microcomputer-based communication programs that could prove useful to evaluators: (1) the direct communication of information generated by one computer to another computer; (2) using the microcomputer as a terminal to a mainframe computer to input, direct the analysis of, and/or output data using a statistical…

Network Simulation Training Instructor's Guide and Student Handouts. Series #B01038.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This training material provides the reader with information on the installation of and instruction in the use of the on-line Novell Netware V2.15 training software, and consists of an Instructor's Guide and Student Handouts. The instructor's guide includes the following sections: system requirements; installation; starting the tutorial; completing…

Integrating Technology into the K-12 Music Curriculum.

ERIC Educational Resources Information Center

Washington Office of the State Superintendent of Public Instruction, Olympia.

This guide is intended to provide resources for integrating technology into the K-12 music curriculum. The focus of the guide is on computer software and the use of MIDI (Musical Instrument Digital Interface) in the music classroom. The guide gives two examples of commercially available curricula that integrate technology as well as lesson plans…

Reviews Book: Extended Project Student Guide Book: My Inventions Book: ASE Guide to Research in Science Education Classroom Video: The Science of Starlight Software: SPARKvue Book: The Geek Manifesto Ebook: A Big Ball of Fire Apps

NASA Astrophysics Data System (ADS)

2014-05-01

WE RECOMMEND Level 3 Extended Project Student Guide A non-specialist, generally useful and nicely put together guide to project work ASE Guide to Research in Science Education Few words wasted in this handy introduction and reference The Science of Starlight Slow but steady DVD covers useful ground SPARKvue Impressive software now available as an app WORTH A LOOK My Inventions and Other Writings Science, engineering, autobiography, visions and psychic phenomena mixed in a strange but revealing concoction The Geek Manifesto: Why Science Matters More enthusiasm than science, but a good motivator and interesting A Big Ball of Fire: Your questions about the Sun answered Free iTunes download made by and for students goes down well APPS Collider visualises LHC experiments ... Science Museum app enhances school trips ... useful information for the Cambridge Science Festival

Instrument control software development process for the multi-star AO system ARGOS

NASA Astrophysics Data System (ADS)

Kulas, M.; Barl, L.; Borelli, J. L.; Gässler, W.; Rabien, S.

2012-09-01

The ARGOS project (Advanced Rayleigh guided Ground layer adaptive Optics System) will upgrade the Large Binocular Telescope (LBT) with an AO System consisting of six Rayleigh laser guide stars. This adaptive optics system integrates several control loops and many different components like lasers, calibration swing arms and slope computers that are dispersed throughout the telescope. The purpose of the instrument control software (ICS) is running this AO system and providing convenient client interfaces to the instruments and the control loops. The challenges for the ARGOS ICS are the development of a distributed and safety-critical software system with no defects in a short time, the creation of huge and complex software programs with a maintainable code base, the delivery of software components with the desired functionality and the support of geographically distributed project partners. To tackle these difficult tasks, the ARGOS software engineers reuse existing software like the novel middleware from LINC-NIRVANA, an instrument for the LBT, provide many tests at different functional levels like unit tests and regression tests, agree about code and architecture style and deliver software incrementally while closely collaborating with the project partners. Many ARGOS ICS components are already successfully in use in the laboratories for testing ARGOS control loops.

Computer-Guided Deep Brain Stimulation Programming for Parkinson's Disease.

PubMed

Heldman, Dustin A; Pulliam, Christopher L; Urrea Mendoza, Enrique; Gartner, Maureen; Giuffrida, Joseph P; Montgomery, Erwin B; Espay, Alberto J; Revilla, Fredy J

2016-02-01

Pilot study to evaluate computer-guided deep brain stimulation (DBS) programming designed to optimize stimulation settings using objective motion sensor-based motor assessments. Seven subjects (five males; 54-71 years) with Parkinson's disease (PD) and recently implanted DBS systems participated in this pilot study. Within two months of lead implantation, the subject returned to the clinic to undergo computer-guided programming and parameter selection. A motion sensor was placed on the index finger of the more affected hand. Software guided a monopolar survey during which monopolar stimulation on each contact was iteratively increased followed by an automated assessment of tremor and bradykinesia. After completing assessments at each setting, a software algorithm determined stimulation settings designed to minimize symptom severities, side effects, and battery usage. Optimal DBS settings were chosen based on average severity of motor symptoms measured by the motion sensor. Settings chosen by the software algorithm identified a therapeutic window and improved tremor and bradykinesia by an average of 35.7% compared with baseline in the "off" state (p < 0.01). Motion sensor-based computer-guided DBS programming identified stimulation parameters that significantly improved tremor and bradykinesia with minimal clinician involvement. Automated motion sensor-based mapping is worthy of further investigation and may one day serve to extend programming to populations without access to specialized DBS centers. © 2015 International Neuromodulation Society.

Modeling the human as a controller in a multitask environment

NASA Technical Reports Server (NTRS)

Govindaraj, T.; Rouse, W. B.

1978-01-01

Modeling the human as a controller of slowly responding systems with preview is considered. Along with control tasks, discrete noncontrol tasks occur at irregular intervals. In multitask situations such as these, it has been observed that humans tend to apply piecewise constant controls. It is believed that the magnitude of controls and the durations for which they remain constant are dependent directly on the system bandwidth, preview distance, complexity of the trajectory to be followed, and nature of the noncontrol tasks. A simple heuristic model of human control behavior in this situation is presented. The results of a simulation study, whose purpose was determination of the sensitivity of the model to its parameters, are discussed.

NASA Briefing Previews Upcoming Spacewalks on ISS

NASA Image and Video Library

2017-10-02

On Oct. 2, NASA held a briefing at the Johnson Space Center in Houston, to preview a trio of spacewalks in October to perform maintenance outside the International Space Station. Expedition 53 Commander Randy Bresnik of NASA will lead all three spacewalks, joined on Oct. 5 and 10 by Flight Engineer Mark Vande Hei, also of NASA. Flight Engineer Joe Acaba of NASA will join Bresnik on Oct. 18 for the third spacewalk. NASA TV coverage of the spacewalks will begin at 6:30 a.m. on Oct. 5, 10 and 18. Each spacewalk is scheduled to start at approximately 8:05 a.m., however, the spacewalks may begin earlier if the crew is running ahead of schedule.

Twins and transsexualism: an update and a preview; research reviews: conjoined twins, angiographic lesions, single versus double embryo transfer; headlines: school placement legislation, Junior Taekwondo Olympics, prosthetic ears, murder victim.

PubMed

Segal, Nancy L

2007-12-01

In recent years, there has been growing appreciation for the complexity of gender identity. Focusing on monozygotic (MZ) twins discordant for transsexualism can offer clues to events that may trigger this behavioral difference, offering new information about critical underlying factors. An update of twin research in this area is provided, together with a preview of a compelling new film, 'Red Without Blue.' Next, twin study findings on the topics of conjoined twinning, angiographic lesions and embryo transfer are provided. This is followed by a survey of newsworthy twins and twin-related events.

Reliability of implant surgical guides based on soft-tissue models.

PubMed

Maney, Pooja; Simmons, David E; Palaiologou, Archontia; Kee, Edwin

2012-12-01

The purpose of this study was to determine the accuracy of implant surgical guides fabricated on diagnostic casts. Guides were fabricated with radiopaque rods representing implant positions. Cone beam computerized tomograms were taken with guides in place. Accuracy was evaluated using software to simulate implant placement. Twenty-two sites (47%) were considered accurate (13 of 24 maxillary and 9 of 23 mandibular sites). Soft-tissue models do not always provide sufficient accuracy for fabricating implant surgical guides.

Software development to implement the TxDOT culvert rating guide.

DOT National Transportation Integrated Search

2013-05-01

This implementation project created CULVLR: Culvert Load Rating, Version 1.0.0, a Windows-based : desktop application software package that automates the process by which Texas Department of Transportation : (TxDOT) engineers and their consultants ...

Federal Emergency Management Information System (FEMIS) system administration guide. Version 1.3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burford, M.J.; Burnett, R.A.; Downing, T.R.

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and analysis tool that was developed by the (Pacific Northwest National Laboratory) (PNNL) under the direction of the U.S. Army Chemical Biological Defense Command. The FEMIS System Administration Guide defines FEMIS hardware and software requirements and gives instructions for installing the FEMIS software package. 91 This document also contains information on the following: software installation for the FEMIS data servers, communication server, mail server, and the emergency management workstations; distribution media loading and FEMIS installation validation and troubleshooting; and system management of FEMIS users, login, privileges, and usage.more » The system administration utilities (tools), available in the FEMIS client software, are described for user accounts and site profile. This document also describes the installation and use of system and database administration utilities that will assist in keeping the FEMIS system running in an operational environment.« less

Software Engineering Laboratory (SEL) Data Base Maintenance System (DBAM) user's guide and system description

NASA Technical Reports Server (NTRS)

Lo, P. S.; Card, D.

1983-01-01

The Software Engineering Laboratory (SEL) Data Base Maintenance System (DBAM) is explained. The various software facilities of the SEL, DBAM operating procedures, and DBAM system information are described. The relationships among DBAM components (baseline diagrams), component descriptions, overlay descriptions, indirect command file listings, file definitions, and sample data collection forms are provided.

Preparation guide for class B software specification documents

NASA Technical Reports Server (NTRS)

Tausworthe, R. C.

1979-01-01

General conceptual requirements and specific application rules and procedures are provided for the production of software specification documents in conformance with deep space network software standards and class B standards. Class B documentation is identified as the appropriate level applicable to implementation, sustaining engineering, and operational uses by qualified personnel. Special characteristics of class B documents are defined.

A house divided: cooperative and competitive recruitment in vital industries.

PubMed

Willis, William K; Muslin, Ivan; Timko, Karlyn N

2016-03-01

To propose a theoretical based model approach to address the nursing shortage problem of recruiting qualified applicants. Vital industries such as nursing and trucking face a large labour shortage. A literature review focusing on recruitment and realistic job previews examines relevant theories and an indication of the focus of similar research. Game theory illustrates cooperative and competitive recruitment strategies in vital industries. Proposition and model development where cooperative or competitive strategies for recruitment can either increase or decrease the employee applicant pool. Institutional theory states that firms within a population become isomorphic in nature. Firms employing cooperative or competitive strategies for recruitment can change organisational practices through isomorphic processes. Industries facing a labour market shortage using cooperative strategy will use realistic job previews accurately to disseminate information about industry jobs. Realistic job previews will increase the applicant pool through individuals self-selecting into, rather than out of, the applicant pool. Recruitment in the nursing industry has been examined at the individual applicant and organisational level, yet the overall industry has been ignored. As nursing shortages continue, viewing recruitment at the macro level (the overall industry) is appropriate. Game theory as proposed provides opportunities for current research at the industry level. © 2015 John Wiley & Sons Ltd.

Intuitive Exploration of Volumetric Data Using Dynamic Galleries.

PubMed

Jönsson, Daniel; Falk, Martin; Ynnerman, Anders

2016-01-01

In this work we present a volume exploration method designed to be used by novice users and visitors to science centers and museums. The volumetric digitalization of artifacts in museums is of rapidly increasing interest as enhanced user experience through interactive data visualization can be achieved. This is, however, a challenging task since the vast majority of visitors are not familiar with the concepts commonly used in data exploration, such as mapping of visual properties from values in the data domain using transfer functions. Interacting in the data domain is an effective way to filter away undesired information but it is difficult to predict where the values lie in the spatial domain. In this work we make extensive use of dynamic previews instantly generated as the user explores the data domain. The previews allow the user to predict what effect changes in the data domain will have on the rendered image without being aware that visual parameters are set in the data domain. Each preview represents a subrange of the data domain where overview and details are given on demand through zooming and panning. The method has been designed with touch interfaces as the target platform for interaction. We provide a qualitative evaluation performed with visitors to a science center to show the utility of the approach.

Effects of word predictability and preview lexicality on eye movements during reading: A comparison between young and older adults.

PubMed

Choi, Wonil; Lowder, Matthew W; Ferreira, Fernanda; Swaab, Tamara Y; Henderson, John M

2017-05-01

Previous eye-tracking research has characterized older adults' reading patterns as "risky," arguing that compared to young adults, older adults skip more words, have longer saccades, and are more likely to regress to previous portions of the text. In the present eye-tracking study, we reexamined the claim that older adults adopt a risky reading strategy, utilizing the boundary paradigm to manipulate parafoveal preview and contextual predictability of a target word. Results showed that older adults had longer fixation durations compared to young adults; however, there were no age differences in skipping rates, saccade length, or proportion of regressions. In addition, readers showed higher skipping rates of the target word if the preview string was a word than if it was a nonword, regardless of age. Finally, the effect of predictability in reading times on the target word was larger for older adults than for young adults. These results suggest that older adults' reading strategies are not as risky as was previously claimed. Instead, we propose that older adults can effectively combine top-down information from the sentence context with bottom-up information from the parafovea to optimize their reading strategies. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

The FORTRAN static source code analyzer program (SAP) user's guide, revision 1

NASA Technical Reports Server (NTRS)

Decker, W.; Taylor, W.; Eslinger, S.

1982-01-01

The FORTRAN Static Source Code Analyzer Program (SAP) User's Guide (Revision 1) is presented. SAP is a software tool designed to assist Software Engineering Laboratory (SEL) personnel in conducting studies of FORTRAN programs. SAP scans FORTRAN source code and produces reports that present statistics and measures of statements and structures that make up a module. This document is a revision of the previous SAP user's guide, Computer Sciences Corporation document CSC/TM-78/6045. SAP Revision 1 is the result of program modifications to provide several new reports, additional complexity analysis, and recognition of all statements described in the FORTRAN 77 standard. This document provides instructions for operating SAP and contains information useful in interpreting SAP output.

Globus Quick Start Guide. Globus Software Version 1.1

NASA Technical Reports Server (NTRS)

1999-01-01

The Globus Project is a community effort, led by Argonne National Laboratory and the University of Southern California's Information Sciences Institute. Globus is developing the basic software infrastructure for computations that integrate geographically distributed computational and information resources.

11 CFR 9033.12 - Production of computerized information.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Disbursements made and reimbursements received for the cost of transportation, ground services and facilities...'s software capabilities, such as user guides, technical manuals, formats, layouts and other... software and the computerized information prepared or maintained by the committee. ...

Software Management Environment (SME) installation guide

NASA Technical Reports Server (NTRS)

Kistler, David; Jeletic, Kellyann

1992-01-01

This document contains installation information for the Software Management Environment (SME), developed for the Systems Development Branch (Code 552) of the Flight Dynamics Division of Goddard Space Flight Center (GSFC). The SME provides an integrated set of management tools that can be used by software development managers in their day-to-day management and planning activities. This document provides a list of hardware and software requirements as well as detailed installation instructions and trouble-shooting information.

The Personal Software Process (PSPSM): An Empirical Study of the Impact of PSP on Individual Engineers.

DTIC Science & Technology

1997-12-01

Watts Humphrey and is described in his book A Discipline for Software Engineering [ Humphrey 95]. Its intended use is to guide the planning and...Pat; Humphrey , Watts S .; Khajenoori, Soheil; Macke, Susan; & Matvya, Annette. "Introducing the Personal Software Process: Three Industry Case... Humphrey 95] Humphrey , Watts S . A Discipline for Software Engineering. Reading, Ma.: Addison-Wesley, 1995. [Mauchly 40] Mauchly, J.W. "Significance

Creating History Documentaries: A Step-by-Step Guide to Video Projects in the Classroom.

ERIC Educational Resources Information Center

Escobar, Deborah

This guide offers an easy introduction to social studies teachers wanting to challenge their students with creative media by bringing the past to life. The 14-step guide shows teachers and students the techniques needed for researching, scripting, and editing a historical documentary. Using a video camera and computer software, students can…

Guided Practice Software for Teaching DNA Replication to Senior High School Students

ERIC Educational Resources Information Center

Woods, Eric C.; McKinnon, Alan E.; Hickford, Jonathan G. H.; Abell, Walt A.

2008-01-01

The prototype of a guided practice application was developed to instruct year 13 biology students in the process of DNA replication. The application uses a high degree of interaction to engage the student in a guided exploration and problem solving exercise. An evaluation revealed that the students showed considerable enthusiasm and significant…

Advanced communications technology satellite high burst rate link evaluation terminal power control and rain fade software test plan, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1993-01-01

The Power Control and Rain Fade Software was developed at the NASA Lewis Research Center to support the Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal (ACTS HBR-LET). The HBR-LET is an experimenters terminal to communicate with the ACTS for various experiments by government, university, and industry agencies. The Power Control and Rain Fade Software is one segment of the Control and Performance Monitor (C&PM) Software system of the HBR-LET. The Power Control and Rain Fade Software automatically controls the LET uplink power to compensate for signal fades. Besides power augmentation, the C&PM Software system is also responsible for instrument control during HBR-LET experiments, control of the Intermediate Frequency Switch Matrix on board the ACTS to yield a desired path through the spacecraft payload, and data display. The Power Control and Rain Fade Software User's Guide, Version 1.0 outlines the commands and procedures to install and operate the Power Control and Rain Fade Software. The Power Control and Rain Fade Software Maintenance Manual, Version 1.0 is a programmer's guide to the Power Control and Rain Fade Software. This manual details the current implementation of the software from a technical perspective. Included is an overview of the Power Control and Rain Fade Software, computer algorithms, format representations, and computer hardware configuration. The Power Control and Rain Fade Test Plan provides a step-by-step procedure to verify the operation of the software using a predetermined signal fade event. The Test Plan also provides a means to demonstrate the capability of the software.

A User’s Guide for the Software Technology Economic Impact Model

DTIC Science & Technology

1991-10-01

Copy 16 oft22 oples U AD-A248 023 \\\\1\\\\\\i\\~\\1\\1\\\\1\\1\\11\\\\\\l~ IDA DOCUMENT D-971 E Tt USER’S GUIDE FOR THE SOFTWARE TECHNOLOGY ECONOMIC IMPACT MODEL I... studied , and they are released by the President of IDA. Group Reports Group Reports record the findings and results of IDA established working groups and...the senior individuals responsible for the project and others as selected by IDA to ensure their high quality and relevance to the problems studied

Software for Optical Archive and Retrieval (SOAR) user's guide, version 4.2

NASA Technical Reports Server (NTRS)

Davis, Charles

1991-01-01

The optical disk is an emerging technology. Because it is not a magnetic medium, it offers a number of distinct advantages over the established form of storage, advantages that make it extremely attractive. They are as follows: (1) the ability to store much more data within the same space; (2) the random access characteristics of the Write Once Read Many optical disk; (3) a much longer life than that of traditional storage media; and (4) much greater data access rate. Software for Optical Archive and Retrieval (SOAR) user's guide is presented.

Ada Implementation Guide. Software Engineering With Ada. Volume 1

DTIC Science & Technology

1994-04-01

Staff, Department ofDefense Dictionary of Military and Associated Terms, Washington, D.C., 1989. STARS McDonal , C., and S . Redwine, *STARS Glossary: A...ADýA28 357> offj I Volume I I SI I t Ada Implementation II Guide 5 Software Engineering With AdaI I S DTIC QUALITY INSPECTED S 5 April 1994 g " 94...and Abbreviations ...................... I I N p a S I I I i I Libt of F4g u OW Tahl Figures 2-1 DON Directives and Instructions for Implementing Public

Software System User’s Manual, Reference Manual, and Installation Guide for the Test Engineer’s Assistant System.

DTIC Science & Technology

1989-02-28

AD-A259 245 RESEARCH TRIANGLE INSTITUTE I SOFTWARE SYSTEM USER’S MANUAL, REFERENCE MANUAL, AND INSTALLATION GUIDE FOR THE TEST ENGINEER’S ASSISTANT...SYSTEM U. yD"VxC - February 28, 1989 Iŕ 5 G3 ’Contract No. DAAL01-86-C-0039 W Prepared for: Department of the Army Electronics Research and...Development Command Fort Monmouth, New Jersey 07703 I Prepared by: Center for Digital Systems ResearchI Research Triangle Institute Research Triangle Park, NC

System Risk Balancing Profiles: Software Component

NASA Technical Reports Server (NTRS)

Kelly, John C.; Sigal, Burton C.; Gindorf, Tom

2000-01-01

The Software QA / V&V guide will be reviewed and updated based on feedback from NASA organizations and others with a vested interest in this area. Hardware, EEE Parts, Reliability, and Systems Safety are a sample of the future guides that will be developed. Cost Estimates, Lessons Learned, Probability of Failure and PACTS (Prevention, Avoidance, Control or Test) are needed to provide a more complete risk management strategy. This approach to risk management is designed to help balance the resources and program content for risk reduction for NASA's changing environment.

Implementation of the AASHTO mechanistic-empirical pavement design guide for Colorado.

DOT National Transportation Integrated Search

2000-01-01

The objective of this project was to integrate the American Association of State Highway and Transportation Officials (AASHTO) Mechanistic-Empirical Pavement Design Guide, Interim Edition: A Manual of Practice and its accompanying software into the d...

Study of medical education in 3D surgical modeling by surgeons with free open-source software: Example of mandibular reconstruction with fibula free flap and creation of its surgical guides.

PubMed

Ganry, L; Hersant, B; Bosc, R; Leyder, P; Quilichini, J; Meningaud, J P

2018-02-27

Benefits of 3D printing techniques, biomodeling and surgical guides are well known in surgery, especially when the same surgeon who performed the surgery participated in the virtual surgical planning. Our objective was to evaluate the transfer of know how of a neutral 3D surgical modeling free open-source software protocol to surgeons with different surgical specialities. A one-day training session was organised in 3D surgical modeling applied to one mandibular reconstruction case with fibula free flap and creation of its surgical guides. Surgeon satisfaction was analysed before and after the training. Of 22 surgeons, 59% assessed the training as excellent or very good and 68% considered changing their daily surgical routine and would try to apply our open-source software protocol in their department after a single training day. The mean capacity in using the software improved from 4.13 on 10 before to 6.59 on 10 after training for OsiriX ® software, from 1.14 before to 5.05 after training for Meshlab ® , from 0.45 before to 4.91 after training for Netfabb ® and from 1.05 before and 4.41 after training for Blender ® . According to surgeons, using the software Blender ® became harder as the day went on. Despite improvement in the capacity in using software for all participants, more than a single training day is needed for the transfer of know how on 3D modeling with open-source software. Although the know-how transfer, overall satisfaction, actual learning outcomes and relevance of this training were appropriated, a longer training including different topics will be needed to improve training quality. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Operational Suitability Guide. Volume 2. Templates

DTIC Science & Technology

1990-05-01

Intended mission, and the required technical and operational characteristics. The mission must be adequately defined and key hardware and software ...operational availability. With the use of fault-tolerant computer hardware and software , the system R&M will significantly improve end-to-end...should Include both hardware and software elements, as appropriate. Unique characteristics or unique support concepts should be Identified if they result

An overview of STRUCTURE: applications, parameter settings, and supporting software

PubMed Central

Porras-Hurtado, Liliana; Ruiz, Yarimar; Santos, Carla; Phillips, Christopher; Carracedo, Ángel; Lareu, Maria V.

2013-01-01

Objectives: We present an up-to-date review of STRUCTURE software: one of the most widely used population analysis tools that allows researchers to assess patterns of genetic structure in a set of samples. STRUCTURE can identify subsets of the whole sample by detecting allele frequency differences within the data and can assign individuals to those sub-populations based on analysis of likelihoods. The review covers STRUCTURE's most commonly used ancestry and frequency models, plus an overview of the main applications of the software in human genetics including case-control association studies (CCAS), population genetics, and forensic analysis. The review is accompanied by supplementary material providing a step-by-step guide to running STRUCTURE. Methods: With reference to a worked example, we explore the effects of changing the principal analysis parameters on STRUCTURE results when analyzing a uniform set of human genetic data. Use of the supporting software: CLUMPP and distruct is detailed and we provide an overview and worked example of STRAT software, applicable to CCAS. Conclusion: The guide offers a simplified view of how STRUCTURE, CLUMPP, distruct, and STRAT can be applied to provide researchers with an informed choice of parameter settings and supporting software when analyzing their own genetic data. PMID:23755071

Software for MR image overlay guided needle insertions: the clinical translation process

NASA Astrophysics Data System (ADS)

Ungi, Tamas; U-Thainual, Paweena; Fritz, Jan; Iordachita, Iulian I.; Flammang, Aaron J.; Carrino, John A.; Fichtinger, Gabor

2013-03-01

PURPOSE: Needle guidance software using augmented reality image overlay was translated from the experimental phase to support preclinical and clinical studies. Major functional and structural changes were needed to meet clinical requirements. We present the process applied to fulfill these requirements, and selected features that may be applied in the translational phase of other image-guided surgical navigation systems. METHODS: We used an agile software development process for rapid adaptation to unforeseen clinical requests. The process is based on iterations of operating room test sessions, feedback discussions, and software development sprints. The open-source application framework of 3D Slicer and the NA-MIC kit provided sufficient flexibility and stable software foundations for this work. RESULTS: All requirements were addressed in a process with 19 operating room test iterations. Most features developed in this phase were related to workflow simplification and operator feedback. CONCLUSION: Efficient and affordable modifications were facilitated by an open source application framework and frequent clinical feedback sessions. Results of cadaver experiments show that software requirements were successfully solved after a limited number of operating room tests.

Software For Computing Reliability Of Other Software

NASA Technical Reports Server (NTRS)

Nikora, Allen; Antczak, Thomas M.; Lyu, Michael

1995-01-01

Computer Aided Software Reliability Estimation (CASRE) computer program developed for use in measuring reliability of other software. Easier for non-specialists in reliability to use than many other currently available programs developed for same purpose. CASRE incorporates mathematical modeling capabilities of public-domain Statistical Modeling and Estimation of Reliability Functions for Software (SMERFS) computer program and runs in Windows software environment. Provides menu-driven command interface; enabling and disabling of menu options guides user through (1) selection of set of failure data, (2) execution of mathematical model, and (3) analysis of results from model. Written in C language.

Framework Programmable Platform for the Advanced Software Development Workstation (FPP/ASDW). Demonstration framework document. Volume 1: Concepts and activity descriptions

NASA Technical Reports Server (NTRS)

Mayer, Richard J.; Blinn, Thomas M.; Dewitte, Paul S.; Crump, John W.; Ackley, Keith A.

1992-01-01

The Framework Programmable Software Development Platform (FPP) is a project aimed at effectively combining tool and data integration mechanisms with a model of the software development process to provide an intelligent integrated software development environment. Guided by the model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated. The Advanced Software Development Workstation (ASDW) program is conducting research into development of advanced technologies for Computer Aided Software Engineering (CASE).

GEMPAK5 user's guide, version 5.0

NASA Technical Reports Server (NTRS)

Desjardins, Mary L.; Brill, Keith F.; Schotz, Steven S.

1991-01-01

GEMPAK is a general meteorological software package used to analyze and display conventional meteorological data as well as satellite derived parameters. The User's Guide describes the GEMPAK5 programs and input parameters and details the algorithms used for the meteorological computations.

Microgravity vibration isolation: Optimal preview and feedback control

NASA Technical Reports Server (NTRS)

Hampton, R. D.; Knospe, C. R.; Grodsinsky, C. M.; Allaire, P. E.; Lewis, D. W.

1992-01-01

In order to achieve adequate low-frequency vibration isolation for certain space experiments an active control is needed, due to inherent passive-isolator limitations. Proposed here are five possible state-space models for a one-dimensional vibration isolation system with a quadratic performance index. The five models are subsets of a general set of nonhomogeneous state space equations which includes disturbance terms. An optimal control is determined, using a differential equations approach, for this class of problems. This control is expressed in terms of constant, Linear Quadratic Regulator (LQR) feedback gains and constant feedforward (preview) gains. The gains can be easily determined numerically. They result in a robust controller and offers substantial improvements over a control that uses standard LQR feedback alone.

Turbo FRMAC 2016 v. 7.3.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Madrid, Gregory J.; Whitener, Dustin Heath; Folz, Wesley

2017-05-27

The Turbo FRMAC (TF) software program is the software implementation of the science and methodologies utilized in the Federal Radiological Monitoring and Assessment Center (FRMAC). The software automates the calculations described in volumes 1 of "The Federal Manual for Assessing Environmental Data during a Radiological Emergency" (2015 version). In the event of the intentional or accidental release of radioactive material, the software is used to guide and govern the response of the Federal, State, Local, and Tribal governments. The manual, upon which the software is based, is unclassified and freely available on the Internet.

Software quality: Process or people

NASA Technical Reports Server (NTRS)

Palmer, Regina; Labaugh, Modenna

1993-01-01

This paper will present data related to software development processes and personnel involvement from the perspective of software quality assurance. We examine eight years of data collected from six projects. Data collected varied by project but usually included defect and fault density with limited use of code metrics, schedule adherence, and budget growth information. The data are a blend of AFSCP 800-14 and suggested productivity measures in Software Metrics: A Practioner's Guide to Improved Product Development. A software quality assurance database tool, SQUID, was used to store and tabulate the data.

Turbo FRMAC 2018

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fulton, John; Gallagher, Linda; Gonzales, Alejandro

The Turbo FRMAC (TF) software program is the software implementation of the science and methodologies utilized in the Federal Radiological Monitoring and Assessment Center (FRMAC). The software automates the calculations described in volumes 1 of "The Federal Manual for Assessing Environmental Data during a Radiological Emergency" (2015 version). In the event of the intentional or accidental release of radioactive material, the software is used to guide and govern the response of the Federal, State, Local, and Tribal governments. The manual, upon which the software is based, is unclassified and freely available on the Internet.

Framework Programmable Platform for the advanced software development workstation: Framework processor design document

NASA Technical Reports Server (NTRS)

Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Ackley, Keith A.; Crump, Wes; Sanders, Les

1991-01-01

The design of the Framework Processor (FP) component of the Framework Programmable Software Development Platform (FFP) is described. The FFP is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software development environment. Guided by the model, this Framework Processor will take advantage of an integrated operating environment to provide automated support for the management and control of the software development process so that costly mistakes during the development phase can be eliminated.

Turbo FRMAC 2016 Version 7.1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fulton, John; Gallagher, Linda K.; Madrid, Gregory J.

2016-08-01

The Turbo FRMAC (TF) software program is the software implementation of the science and methodologies utilized in the Federal Radiological Monitoring and Assessment Center (FRMAC). The software automates the calculations described in volumes 1 of "The Federal Manual for Assessing Environmental Data during a Radiological Emergency" (2015 version). In the event of the intentional or accidental release of radioactive material, the software is used to guide and govern the response of the Federal, State, Local, and Tribal governments. The manual, upon which the software is based, is unclassified and freely available on the Internet.

Turbo FRMAC 2016 v. 7.2.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Madrid, Gregory J.; Whitener, Dustin Heath; Folz, Wesley

2017-02-27

The Turbo FRMAC (TF) software program is the software implementation of the science and methodologies utilized in the Federal Radiological Monitoring and Assessment Center (FRMAC). The software automates the calculations described in volumes 1 of "The Federal Manual for Assessing Environmental Data during a Radiological Emergency" (2015 version). In the event of the intentional or accidental release of radioactive material, the software is used to guide and govern the response of the Federal, State, Local, and Tribal governments. The manual, upon which the software is based, is unclassified and freely available on the Internet.

Variance in predicted cup size by 2-dimensional vs 3-dimensional computerized tomography-based templating in primary total hip arthroplasty.

PubMed

Osmani, Feroz A; Thakkar, Savyasachi; Ramme, Austin; Elbuluk, Ameer; Wojack, Paul; Vigdorchik, Jonathan M

2017-12-01

Preoperative total hip arthroplasty templating can be performed with radiographs using acetate prints, digital viewing software, or with computed tomography (CT) images. Our hypothesis is that 3D templating is more precise and accurate with cup size prediction as compared to 2D templating with acetate prints and digital templating software. Data collected from 45 patients undergoing robotic-assisted total hip arthroplasty compared cup sizes templated on acetate prints and OrthoView software to MAKOplasty software that uses CT scan. Kappa analysis determined strength of agreement between each templating modality and the final size used. t tests compared mean cup-size variance from the final size for each templating technique. Interclass correlation coefficient (ICC) determined reliability of digital and acetate planning by comparing predictions of the operating surgeon and a blinded adult reconstructive fellow. The Kappa values for CT-guided, digital, and acetate templating with the final size was 0.974, 0.233, and 0.262, respectively. Both digital and acetate templating significantly overpredicted cup size, compared to CT-guided methods ( P < .001). There was no significant difference between digital and acetate templating ( P  = .117). Interclass correlation coefficient value for digital and acetate templating was 0.928 and 0.931, respectively. CT-guided planning more accurately predicts hip implant cup size when compared to the significant overpredictions of digital and acetate templating. CT-guided templating may also lead to better outcomes due to bone stock preservation from a smaller and more accurate cup size predicted than that of digital and acetate predictions.

Structural dynamics payload loads estimates: User guide

NASA Technical Reports Server (NTRS)

Shanahan, T. G.; Engels, R. C.

1982-01-01

This User Guide with an overview of an integration scheme to determine the response of a launch vehicle with multiple payloads. Chapter II discusses the software package associated with the integration scheme together with several sample problems. A short cut version of the integration technique is also discussed. The Guide concludes with a list of references and the listings of the subroutines.

Enable Web-Based Tracking and Guiding by Integrating Location-Awareness with the World Wide Web

ERIC Educational Resources Information Center

Zhou, Rui

2008-01-01

Purpose: The aim of this research is to enable web-based tracking and guiding by integrating location-awareness with the Worldwide Web so that the users can use various location-based applications without installing extra software. Design/methodology/approach: The concept of web-based tracking and guiding is introduced and the relevant issues are…

An Automation Survival Guide for Media Centers.

ERIC Educational Resources Information Center

Whaley, Roger E.

1989-01-01

Reviews factors that should affect the decision to automate a school media center and offers suggestions for the automation process. Topics discussed include getting the library collection ready for automation, deciding what automated functions are needed, evaluating software vendors, selecting software, and budgeting. (CLB)

Standards guide for space and earth sciences computer software

NASA Technical Reports Server (NTRS)

Mason, G.; Chapman, R.; Klinglesmith, D.; Linnekin, J.; Putney, W.; Shaffer, F.; Dapice, R.

1972-01-01

Guidelines for the preparation of systems analysis and programming work statements are presented. The data is geared toward the efficient administration of available monetary and equipment resources. Language standards and the application of good management techniques to software development are emphasized.

Computer Bits: Child Care Center Management Software Buying Guide Update.

ERIC Educational Resources Information Center

Neugebauer, Roger

1987-01-01

Compares seven center management programs used for basic financial and data management tasks such as accounting, payroll and attendance records, and mailing lists. Describes three other specialized programs and gives guidelines for selecting the best software for a particular center. (NH)

45 CFR 307.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... system means the hardware, operational software, applications software and electronic linkages in an... further defined in the OCSE guideline entitled “Automated Systems for Child Support Enforcement: A Guide... training, testing, and conversion plans to install the computer system. (j) The following terms are defined...

45 CFR 307.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... system means the hardware, operational software, applications software and electronic linkages in an... further defined in the OCSE guideline entitled “Automated Systems for Child Support Enforcement: A Guide... training, testing, and conversion plans to install the computer system. (j) The following terms are defined...

45 CFR 307.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... system means the hardware, operational software, applications software and electronic linkages in an... further defined in the OCSE guideline entitled “Automated Systems for Child Support Enforcement: A Guide... training, testing, and conversion plans to install the computer system. (j) The following terms are defined...

45 CFR 307.1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... system means the hardware, operational software, applications software and electronic linkages in an... further defined in the OCSE guideline entitled “Automated Systems for Child Support Enforcement: A Guide... training, testing, and conversion plans to install the computer system. (j) The following terms are defined...

45 CFR 307.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... system means the hardware, operational software, applications software and electronic linkages in an... further defined in the OCSE guideline entitled “Automated Systems for Child Support Enforcement: A Guide... training, testing, and conversion plans to install the computer system. (j) The following terms are defined...

Scout 2008 Version 1.0 User Guide

EPA Science Inventory

The Scout 2008 version 1.0 software package provides a wide variety of classical and robust statistical methods that are not typically available in other commercial software packages. A major part of Scout deals with classical, robust, and resistant univariate and multivariate ou...

Accuracy of a laboratory-based computer implant guiding system.

PubMed

Barnea, Eitan; Alt, Ido; Kolerman, Roni; Nissan, Joseph

2010-05-01

Computer-guided implant placement is a growing treatment modality in partially and totally edentulous patients, though data about the accuracy of some systems for computer-guided surgery is limited. The purpose of this study was to evaluate the accuracy of a laboratory computer-guided system. A laboratory-based computer guiding system (M Guide; MIS technologies, Shlomi, Israel) was used to place implants in a fresh sheep mandible. A second computerized tomography (CT) scan was taken after placing the implants . The drill plan figures of the planned implants were positioned using assigned software (Med3D, Heidelberg, Germany) on the second CT scan to compare the implant position with the initial planning. Values representing the implant locations of the original drill plan were compared with that of the placed implants using SPSS software. Six measurements (3 vertical, 3 horizontal) were made on each implant to assess the deviation from the initial implant planning. A repeated-measurement analysis of variance was performed comparing the location of measurement (center, abutment, apex) and type of deviation (vertical vs. horizontal). The vertical deviation (mean -0.168) was significantly smaller than the horizontal deviation (mean 1.148). The laboratory computer-based guiding system may be a viable treatment concept for placing implants. Copyright (c) 2010 Mosby, Inc. All rights reserved.

Meta-analyses and Forest plots using a microsoft excel spreadsheet: step-by-step guide focusing on descriptive data analysis.

PubMed

Neyeloff, Jeruza L; Fuchs, Sandra C; Moreira, Leila B

2012-01-20

Meta-analyses are necessary to synthesize data obtained from primary research, and in many situations reviews of observational studies are the only available alternative. General purpose statistical packages can meta-analyze data, but usually require external macros or coding. Commercial specialist software is available, but may be expensive and focused in a particular type of primary data. Most available softwares have limitations in dealing with descriptive data, and the graphical display of summary statistics such as incidence and prevalence is unsatisfactory. Analyses can be conducted using Microsoft Excel, but there was no previous guide available. We constructed a step-by-step guide to perform a meta-analysis in a Microsoft Excel spreadsheet, using either fixed-effect or random-effects models. We have also developed a second spreadsheet capable of producing customized forest plots. It is possible to conduct a meta-analysis using only Microsoft Excel. More important, to our knowledge this is the first description of a method for producing a statistically adequate but graphically appealing forest plot summarizing descriptive data, using widely available software.

Meta-analyses and Forest plots using a microsoft excel spreadsheet: step-by-step guide focusing on descriptive data analysis

PubMed Central

2012-01-01

Background Meta-analyses are necessary to synthesize data obtained from primary research, and in many situations reviews of observational studies are the only available alternative. General purpose statistical packages can meta-analyze data, but usually require external macros or coding. Commercial specialist software is available, but may be expensive and focused in a particular type of primary data. Most available softwares have limitations in dealing with descriptive data, and the graphical display of summary statistics such as incidence and prevalence is unsatisfactory. Analyses can be conducted using Microsoft Excel, but there was no previous guide available. Findings We constructed a step-by-step guide to perform a meta-analysis in a Microsoft Excel spreadsheet, using either fixed-effect or random-effects models. We have also developed a second spreadsheet capable of producing customized forest plots. Conclusions It is possible to conduct a meta-analysis using only Microsoft Excel. More important, to our knowledge this is the first description of a method for producing a statistically adequate but graphically appealing forest plot summarizing descriptive data, using widely available software. PMID:22264277

GEMPAK5. Part 2: GEMPLT programmer's guide, version 5.0

NASA Technical Reports Server (NTRS)

Desjardins, Mary L.; Brill, Keith F.; Schotz, Steven S.

1991-01-01

GEMPAK is a general meteorological software package used to analyze and display conventional meteorological data as well as satellite derived parameters. The GEMPAK Programmer's Guide describes the subroutines which can be used in the GEMPAK graphics and transformation subsystem, GEMPLT.

Data link test and analysis system/TCAS monitor user's guide

NASA Astrophysics Data System (ADS)

Vandongen, John; Wapelhorst, Leo

1991-02-01

This document is a user's guide for the Data Link Test and Analysis System (DATAS) Traffic Alert and Collision Avoidance System (TCAS) monitor. It provides a brief overall hardware description of DATAS configured as a TCAS monitor, and the applications software.

System of Systems Engineering and Integration Process for Network Transport Assessment

DTIC Science & Technology

2016-09-01

SOSE&I CONCEPTS The DOD-sourced “Systems Engineering Guide for Systems of Systems” provides an overview of the SoS environment and SE considerations...usage as a guide in application of systems engineering processes. They are listed verbatim below as defined in the DOD SE guide (ODUSD[A&T]SSE 2008...Technology (A&T), Systems and Software Engineering (SSE). 2008. Systems Engineering Guide for Systems of Systems. Washington, DC: ODUSD(A&T)SSE

DATALINK: Records inventory data collection software. User`s guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, B.A.

1995-03-01

DATALINK was created to provide an easy to use data collection program for records management software products. It provides several useful tools for capturing and validating record index data in the field. It also allows users to easily create a comma delimited, ASCII text file for data export into most records management software products. It runs on virtually any computer us MS-DOS.

VirGO: A Visual Browser for the ESO Science Archive Facility

NASA Astrophysics Data System (ADS)

Chéreau, Fabien

2012-04-01

VirGO is the next generation Visual Browser for the ESO Science Archive Facility developed by the Virtual Observatory (VO) Systems Department. It is a plug-in for the popular open source software Stellarium adding capabilities for browsing professional astronomical data. VirGO gives astronomers the possibility to easily discover and select data from millions of observations in a new visual and intuitive way. Its main feature is to perform real-time access and graphical display of a large number of observations by showing instrumental footprints and image previews, and to allow their selection and filtering for subsequent download from the ESO SAF web interface. It also allows the loading of external FITS files or VOTables, the superimposition of Digitized Sky Survey (DSS) background images, and the visualization of the sky in a `real life' mode as seen from the main ESO sites. All data interfaces are based on Virtual Observatory standards which allow access to images and spectra from external data centers, and interaction with the ESO SAF web interface or any other VO applications supporting the PLASTIC messaging system.

"Eyes On The Solar System": A Real-time, 3D-Interactive Tool to Teach the Wonder of Planetary Science

NASA Astrophysics Data System (ADS)

Hussey, K. J.

2011-10-01

NASA's Jet Propulsion Laboratory is using videogame technology to immerse students, the general public and mission personnel in our solar system and beyond. "Eyes on the Solar System," a cross-platform, real-time, 3D-interactive application that runs inside a Web browser, was released worldwide late last year (solarsystem.nasa.gov/eyes). It gives users an extraordinary view of our solar system by virtually transporting them across space and time to make first-person observations of spacecraft and NASA/ESA missions in action. Key scientific results illustrated with video presentations and supporting imagery are imbedded contextually into the solar system. The presentation will include a detailed demonstration of the software along with a description/discussion of how this technology can be adapted for education and public outreach, as well as a preview of coming attractions. This work is being conducted by the Visualization Technology Applications and Development Group at NASA's Jet Propulsion Laboratory, the same team responsible for "Eyes on the Earth 3D," which can be viewed at climate.nasa.gov/Eyes.html.

A Guide Management System Based on RFID and Bluetooth Technology

NASA Astrophysics Data System (ADS)

Li, Han-Sheng; Wang, Jun-Jun

The most fundamental and important requirement of the tour guide in the tour process is to ensure the safety of tourists. In this paper, a portable guide management system is designed based on RFID technology, the Android software and blue-tooth communication technology. Through this system, the guide can get real-time information if some tourists are l behind, and send text message or dial to those tourists who are l behind immediately. The system reduces the roll-calling time on the tourists, improves the tour guide work efficiency and service quality.

A Brief Study of Software Engineering Professional Continuing Education in DoD Acquisition

DTIC Science & Technology

2010-04-01

Lifecycle Processes (IEEE 12207 ) (810) 37% 61% 2% Guide to the Software Engineering Body of K l d (SWEBOK) (804) 67% 31% 2% now e ge Software...Engineering-Software Measurement Process ( ISO /IEC 15939) (797) 55% 44% 2% Capability Maturity Model Integration (806) 17% 81% 2% Six Sigma Process...Improvement (804) 7% 91% 1% ISO 9000 Quality Management Systems (803) 10% 89% 1% 28 Conclusions Significant problem areas R i tequ remen s Management Very

Proceedings of the Joint Logistics Commanders Joint Policy Coordinating Group on Computer Resource Management; Computer Software Management Software Workshop, 2-5 April 1979.

DTIC Science & Technology

1979-08-21

Appendix s - Outline and Draft Material for Proposed Triservice Interim Guideline on Application of Software Acceptance Criteria....... 269 Appendix 9...AND DRAFT MATERIAL FOR PROPOSED TRISERVICE INTERIM GUIDELINE ON APPLICATION OF SOFTWARE ACCEPTANCE CRITERIA I I INTRODUCTION The purpose of this guide...contract item (CPCI) (code) 5. CPCI test plan 6. CPCI test procedures 7. CPCI test report 8. Handbooks and manuals. Al though additional material does

Software Assurance in Acquisition: Mitigating Risks to the Enterprise. A Reference Guide for Security-Enhanced Software Acquisition and Outsourcing

DTIC Science & Technology

2009-02-01

management, available at <http://www.iso.org/ iso /en/CatalogueDetailPage.CatalogueDetail?CSNUMBER=39612&ICS1=35&ICS2=40 &ICS3=>. ISO /IEC 27001 . Information...Management of the Systems Engineering Process. [ ISO /IEC 27001 ] ISO /IEC 27001 :2005. Information technology -- Security techniques -- Information security...software life cycles [ ISO /IEC 15026]. Software assurance is a key element of national security and homeland security. It is critical because dramatic

Orbit determination software development for microprocessor based systems: Evaluation and recommendations

NASA Technical Reports Server (NTRS)

Shenitz, C. M.; Mcgarry, F. E.; Tasaki, K. K.

1980-01-01

A guide is presented for National Aeronautics and Space Administration management personnel who stand to benefit from the lessons learned in developing microprocessor-based flight dynamics software systems. The essential functional characteristics of microprocessors are presented. The relevant areas of system support software are examined, as are the distinguishing characteristics of flight dynamics software. Design examples are provided to illustrate the major points presented, and actual development experience obtained in this area is provided as evidence to support the conclusions reached.

Generic Software Architecture for Prognostics (GSAP) User Guide

NASA Technical Reports Server (NTRS)

Teubert, Christopher Allen; Daigle, Matthew John; Watkins, Jason; Sankararaman, Shankar; Goebel, Kai

2016-01-01

The Generic Software Architecture for Prognostics (GSAP) is a framework for applying prognostics. It makes applying prognostics easier by implementing many of the common elements across prognostic applications. The standard interface enables reuse of prognostic algorithms and models across systems using the GSAP framework.

The road to successful ITS software acquisition. Volume 2, Software acquisition process reference guide

DOT National Transportation Integrated Search

2000-12-01

The current performance-related specifications (PRS) methodology has been under development by the Federal Highway Administration (FHWA) for several years and has now reached a level at which it can be implemented by State highway agencies. PRS for h...

XpressWare Installation User guide

NASA Astrophysics Data System (ADS)

Duffey, K. P.

XpressWare is a set of X terminal software, released by Tektronix Inc, that accommodates the X Window system on a range of host computers. The software comprises boot files (the X server image), configuration files, fonts, and font tools to support the X terminal. The files can be installed on one host or distributed across multiple hosts The purpose of this guide is to present the system or network administrator with a step-by-step account of how to install XpressWare, and how subsequently to configure the X terminals appropriately for the environment in which they operate.

An optimal model-based trajectory following architecture synthesising the lateral adaptive preview strategy and longitudinal velocity planning for highly automated vehicle

NASA Astrophysics Data System (ADS)

Cao, Haotian; Song, Xiaolin; Zhao, Song; Bao, Shan; Huang, Zhi

2017-08-01

Automated driving has received a broad of attentions from the academia and industry, since it is effective to greatly reduce the severity of potential traffic accidents and achieve the ultimate automobile safety and comfort. This paper presents an optimal model-based trajectory following architecture for highly automated vehicle in its driving tasks such as automated guidance or lane keeping, which includes a velocity-planning module, a steering controller and a velocity-tracking controller. The velocity-planning module considering the optimal time-consuming and passenger comforts simultaneously could generate a smooth velocity profile. The robust sliding mode control (SMC) steering controller with adaptive preview time strategy could not only track the target path well, but also avoid a big lateral acceleration occurred in its path-tracking progress due to a fuzzy-adaptive preview time mechanism introduced. In addition, an SMC controller with input-output linearisation method for velocity tracking is built and validated. Simulation results show this trajectory following architecture are effective and feasible for high automated driving vehicle, comparing with the Driver-in-the-Loop simulations performed by an experienced driver and novice driver, respectively. The simulation results demonstrate that the present trajectory following architecture could plan a satisfying longitudinal speed profile, track the target path well and safely when dealing with different road geometry structure, it ensures a good time efficiency and driving comfort simultaneously.

Skipping of Chinese characters does not rely on word-based processing.

PubMed

Lin, Nan; Angele, Bernhard; Hua, Huimin; Shen, Wei; Zhou, Junyi; Li, Xingshan

2018-02-01

Previous eye-movement studies have indicated that people tend to skip extremely high-frequency words in sentence reading, such as "the" in English and "/de" in Chinese. Two alternative hypotheses have been proposed to explain how this frequent skipping happens in Chinese reading: one assumes that skipping happens when the preview has been fully identified at the word level (word-based skipping); the other assumes that skipping happens whenever the preview character is easy to identify regardless of whether lexical processing has been completed or not (character-based skipping). Using the gaze-contingent display change paradigm, we examined the two hypotheses by substituting the preview of the third character of a four-character Chinese word with the high-frequency Chinese character "/de", which should disrupt the ongoing word-level processing. The character-based skipping hypothesis predicts that this manipulation will enhance the skipping probability of the target character (i.e., the third character of the target word), because the character "/de" has much higher character frequency than the original character. The word-based skipping hypothesis instead predicts a reduction of the skipping probability of the target character because the presence of the character "/de" is lexically infelicitous at word level. The results supported the character-based skipping hypothesis, indicating that in Chinese reading the decision of skipping a character can be made before integrating it into a word.

Stochastic optimal preview control of a vehicle suspension

NASA Astrophysics Data System (ADS)

Marzbanrad, Javad; Ahmadi, Goodarz; Zohoor, Hassan; Hojjat, Yousef

2004-08-01

Stochastic optimal control of a vehicle suspension on a random road is studied. The road roughness height is modelled as a filtered white noise stochastic process and a four-degree-of-freedom half-car model is used in the analysis. It is assumed that a sensor is mounted in the front bumper that measures the road irregularity at some distances in the front of the vehicle. Two other sensors also measure relative velocities of the vehicle body with respect to the unsprung masses in the vehicle suspension spaces. All measurements are assumed to be conducted in a noisy environment. The state variables of the vehicle system are estimated using a method similar to the Kalman filter. The suspension system is optimized by minimizing the performance index containing the mean-square values of body accelerations (including effects of heave and pitch), tire deflections and front and rear suspension rattle spaces. The effect of delay between front and rear wheels is included in the analysis. For stochastic active control with and without preview, the suspension performance and the power demand are evaluated and compared with those of the passive system. The results show that the inclusion of time delay between the front and rear axles and the preview information measured by the sensor mounted on the vehicle improves all aspects of the suspension performance, while reducing the energy consumption.

DataComm in Flight Deck Surface Trajectory-Based Operations

NASA Technical Reports Server (NTRS)

Bakowski, Deborah L.; Foyle, David C.; Hooey, Becky L.; Meyer, Glenn R.; Wolter, Cynthia A.

2012-01-01

The purpose of this pilot-in-the-loop aircraft taxi simulation was to evaluate a NextGen concept for surface trajectory-based operations (STBO) in which air traffic control (ATC) issued taxi clearances with a required time of arrival (RTA) by Data Communications (DataComm). Flight deck avionics, driven by an error-nulling algorithm, displayed the speed needed to meet the RTA. To ensure robustness of the algorithm, the ability of 10 two-pilot crews to meet the RTA was tested in nine experimental trials representing a range of realistic conditions including a taxi route change, an RTA change, a departure clearance change, and a crossing traffic hold scenario. In some trials, these DataComm taxi clearances or clearance modifications were accompanied by 'preview' information, in which the airport map display showed a preview of the proposed route changes, including the necessary speed to meet the RTA. Overall, the results of this study show that with the aid of the RTA speed algorithm, pilots were able to meet their RTAs with very little time error in all of the robustness-testing scenarios. Results indicated that when taxi clearance changes were issued by DataComm only, pilots required longer notification distances than with voice communication. However, when the DataComm was accompanied by graphical preview, the notification distance required by pilots was equivalent to that for voice.

DataComm in Flight Deck Surface Trajectory-Based Operations. Chapter 20

NASA Technical Reports Server (NTRS)

Bakowski, Deborah L.; Foyle, David C.; Hooey, Becky L.; Meyer, Glenn R.; Wolter, Cynthia A.

2012-01-01

The purpose of this pilot-in-the-loop aircraft taxi simulation was to evaluate a NextGen concept for surface trajectory-based operations (STBO) in which air traffic control (ATC) issued taxi clearances with a required time of arrival (RTA) by Data Communications (DataComm). Flight deck avionics, driven by an error-nulling algorithm, displayed the speed needed to meet the RTA. To ensure robustness of the algorithm, the ability of 10 two-pilot crews to meet the RTA was tested in nine experimental trials representing a range of realistic conditions including a taxi route change, an RTA change, a departure clearance change, and a crossing traffic hold scenario. In some trials, these DataComm taxi clearances or clearance modifications were accompanied by preview information, in which the airport map display showed a preview of the proposed route changes, including the necessary speed to meet the RTA. Overall, the results of this study show that with the aid of the RTA speed algorithm, pilots were able to meet their RTAs with very little time error in all of the robustness-testing scenarios. Results indicated that when taxi clearance changes were issued by DataComm only, pilots required longer notification distances than with voice communication. However, when the DataComm was accompanied by graphical preview, the notification distance required by pilots was equivalent to that for voice.

The Roles for Prior Visual Experience and Age on the Extraction of Egocentric Distance.

PubMed

Wallin, Courtney P; Gajewski, Daniel A; Teplitz, Rebeca W; Mihelic Jaidzeka, Sandra; Philbeck, John W

2017-01-01

In a well-lit room, observers can generate well-constrained estimates of the distance to an object on the floor even with just a fleeting glimpse. Performance under these conditions is typically characterized by some underestimation but improves when observers have previewed the room. Such evidence suggests that information extracted from longer durations may be stored to contribute to the perception of distance at limited time frames. Here, we examined the possibility that this stored information is used differentially across age. Specifically, we posited that older adults would rely more than younger adults on information gathered and stored at longer glimpses to judge the distance of briefly glimpsed objects. We collected distance judgments from younger and older adults after brief target glimpses. Half of the participants were provided 20-s previews of the testing room in advance; the other half received no preview. Performance benefits were observed for all individuals with prior visual experience, and these were moderately more pronounced for the older adults. The results suggest that observers store contextual information gained from longer viewing durations to aid in the perception of distance at brief glimpses, and that this memory becomes more important with age. © The Author 2016. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

GUIDEseq: a bioconductor package to analyze GUIDE-Seq datasets for CRISPR-Cas nucleases.

PubMed

Zhu, Lihua Julie; Lawrence, Michael; Gupta, Ankit; Pagès, Hervé; Kucukural, Alper; Garber, Manuel; Wolfe, Scot A

2017-05-15

Genome editing technologies developed around the CRISPR-Cas9 nuclease system have facilitated the investigation of a broad range of biological questions. These nucleases also hold tremendous promise for treating a variety of genetic disorders. In the context of their therapeutic application, it is important to identify the spectrum of genomic sequences that are cleaved by a candidate nuclease when programmed with a particular guide RNA, as well as the cleavage efficiency of these sites. Powerful new experimental approaches, such as GUIDE-seq, facilitate the sensitive, unbiased genome-wide detection of nuclease cleavage sites within the genome. Flexible bioinformatics analysis tools for processing GUIDE-seq data are needed. Here, we describe an open source, open development software suite, GUIDEseq, for GUIDE-seq data analysis and annotation as a Bioconductor package in R. The GUIDEseq package provides a flexible platform with more than 60 adjustable parameters for the analysis of datasets associated with custom nuclease applications. These parameters allow data analysis to be tailored to different nuclease platforms with different length and complexity in their guide and PAM recognition sequences or their DNA cleavage position. They also enable users to customize sequence aggregation criteria, and vary peak calling thresholds that can influence the number of potential off-target sites recovered. GUIDEseq also annotates potential off-target sites that overlap with genes based on genome annotation information, as these may be the most important off-target sites for further characterization. In addition, GUIDEseq enables the comparison and visualization of off-target site overlap between different datasets for a rapid comparison of different nuclease configurations or experimental conditions. For each identified off-target, the GUIDEseq package outputs mapped GUIDE-Seq read count as well as cleavage score from a user specified off-target cleavage score prediction algorithm permitting the identification of genomic sequences with unexpected cleavage activity. The GUIDEseq package enables analysis of GUIDE-data from various nuclease platforms for any species with a defined genomic sequence. This software package has been used successfully to analyze several GUIDE-seq datasets. The software, source code and documentation are freely available at http://www.bioconductor.org/packages/release/bioc/html/GUIDEseq.html .

36 CFR Appendix to Part 1193 - Advisory Guidance

Code of Federal Regulations, 2013 CFR

2013-07-01

... weight of these factors is a compliance issue, under the jurisdiction of the Federal Communications... information and documentation includes user guides, installation guides, and product support communications...” rather than using the space bar. This is necessary because Braille translation software relies on the...

Administrative/Office Technology. A Guide to Resources.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This guide, which was written for general marketing instructors in Ohio, lists nearly 450 resources for use in conjunction with the Administrative/Office Technology Occupational Competency Analysis Profile. The texts, workbooks, modules, software, videos, and learning activities packets listed are categorized by the following topics:…

GEMPAK5. Part 1: GEMPAK5 programmer's guide, version 5.0

NASA Technical Reports Server (NTRS)

Desjardins, Mary L.; Brill, Keith F.; Schotz, Steven S.

1991-01-01

GEMPAK is a general meteorological software package used to analyze and display conventional meteorological data as well as satellite derived parameters. The Programmer's Guide describes the subroutines which can be used to build new GEMPAK programs. Part 1 contains GEMPAK subroutines.

Creation of the selection list for the Experiment Scheduling Program (ESP)

NASA Technical Reports Server (NTRS)

Deuermeyer, B. L.; Shannon, R. E.; Underbrink, A. J., Jr.

1986-01-01

The efforts to develop a procedure to construct selection groups to augment the Experiment Scheduling Program (ESP) are summarized. Included is a User's Guide and a sample scenario to guide in the use of the software system that implements the developed procedures.

General Marketing. A Guide to Resources.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This guide, which was written for general marketing instructors in Ohio, lists more than 600 resources for use in conjunction with the General Marketing Occupational Competency Analysis Profile. The texts, workbooks, modules, software, videos, and learning activities packets listed are categorized by the following topics: human resource…

C style guide

NASA Technical Reports Server (NTRS)

Doland, Jerry; Valett, Jon

1994-01-01

This document discusses recommended practices and style for programmers using the C language in the Flight Dynamics Division environment. Guidelines are based on generally recommended software engineering techniques, industry resources, and local convention. The Guide offers preferred solutions to common C programming issues and illustrates through examples of C Code.

The road to successful its software acquisition : Volume ii : software acquisition process reference guide

DOT National Transportation Integrated Search

1998-11-01

This primer is designed to provide basic information about the Highway Account of the Highway Trust Fund (HTF). It describes how the fund works, its sources of revenue, what the balances are, funding levels, and budgetary constraints on spending leve...

A user's guide to Sandia's latin hypercube sampling software : LHS UNIX library/standalone version.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swiler, Laura Painton; Wyss, Gregory Dane

2004-07-01

This document is a reference guide for the UNIX Library/Standalone version of the Latin Hypercube Sampling Software. This software has been developed to generate Latin hypercube multivariate samples. This version runs on Linux or UNIX platforms. This manual covers the use of the LHS code in a UNIX environment, run either as a standalone program or as a callable library. The underlying code in the UNIX Library/Standalone version of LHS is almost identical to the updated Windows version of LHS released in 1998 (SAND98-0210). However, some modifications were made to customize it for a UNIX environment and as a librarymore » that is called from the DAKOTA environment. This manual covers the use of the LHS code as a library and in the standalone mode under UNIX.« less

Current Physics Research: Part I.

ERIC Educational Resources Information Center

Schewe, Phillip F.

1980-01-01

This article is a preview of the book, "Physics News in 1980." Five research areas are reviewed: high energy particle accelerators, fusion reactors, solar cells, astrophysics, and gauge theories. (Author/DS)

Cassini End of Mission Preview

NASA Image and Video Library

2017-09-13

Director of NASA's Planetary Science Division, Jim Green, is seen during a press conference previewing Cassini's End of Mission, Wednesday, Sept. 13, 2017 at NASA's Jet Propulsion Laboratory in Pasadena, California. Since its arrival in 2004, the Cassini-Huygens mission has been a discovery machine, revolutionizing our knowledge of the Saturn system and captivating us with data and images never before obtained with such detail and clarity. On Sept. 15, 2017, operators will deliberately plunge the spacecraft into Saturn, as Cassini gathered science until the end. The “plunge” ensures Saturn’s moons will remain pristine for future exploration. During Cassini’s final days, mission team members from all around the world gathered at NASA’s Jet Propulsion Laboratory, Pasadena, California, to celebrate the achievements of this historic mission. Photo Credit: (NASA/Joel Kowsky)

Cassini End of Mission Preview

NASA Image and Video Library

2017-09-13

Cassini project scientist at JPL, Linda Spilker answers questions from members of the media during a press conference previewing Cassini's End of Mission, Wednesday, Sept. 13, 2017 at NASA's Jet Propulsion Laboratory in Pasadena, California. Since its arrival in 2004, the Cassini-Huygens mission has been a discovery machine, revolutionizing our knowledge of the Saturn system and captivating us with data and images never before obtained with such detail and clarity. On Sept. 15, 2017, operators will deliberately plunge the spacecraft into Saturn, as Cassini gathered science until the end. The “plunge” ensures Saturn’s moons will remain pristine for future exploration. During Cassini’s final days, mission team members from all around the world gathered at NASA’s Jet Propulsion Laboratory, Pasadena, California, to celebrate the achievements of this historic mission. Photo Credit: (NASA/Joel Kowsky)

Cassini End of Mission Preview

NASA Image and Video Library

2017-09-13

Cassini program manager at JPL, Earl Maize is seen during a press conference previewing Cassini's End of Mission, Wednesday, Sept. 13, 2017 at NASA's Jet Propulsion Laboratory in Pasadena, California. Since its arrival in 2004, the Cassini-Huygens mission has been a discovery machine, revolutionizing our knowledge of the Saturn system and captivating us with data and images never before obtained with such detail and clarity. On Sept. 15, 2017, operators will deliberately plunge the spacecraft into Saturn, as Cassini gathered science until the end. The “plunge” ensures Saturn’s moons will remain pristine for future exploration. During Cassini’s final days, mission team members from all around the world gathered at NASA’s Jet Propulsion Laboratory, Pasadena, California, to celebrate the achievements of this historic mission. Photo Credit: (NASA/Joel Kowsky)

Cassini End of Mission Preview

NASA Image and Video Library

2017-09-13

Preston Dyches, media relations specialist at NASA's Jet Propulsion Laboratory, during a press conference previewing Cassini's End of Mission, Wednesday, Sept. 13, 2017 at NASA's Jet Propulsion Laboratory in Pasadena, California. Since its arrival in 2004, the Cassini-Huygens mission has been a discovery machine, revolutionizing our knowledge of the Saturn system and captivating us with data and images never before obtained with such detail and clarity. On Sept. 15, 2017, operators will deliberately plunge the spacecraft into Saturn, as Cassini gathered science until the end. The “plunge” ensures Saturn’s moons will remain pristine for future exploration. During Cassini’s final days, mission team members from all around the world gathered at NASA’s Jet Propulsion Laboratory, Pasadena, California, to celebrate the achievements of this historic mission. Photo Credit: (NASA/Joel Kowsky)

Cassini End of Mission Preview

NASA Image and Video Library

2017-09-13

Cassini program manager at JPL, Earl Maize speaks during a press conference previewing Cassini's End of Mission, Wednesday, Sept. 13, 2017 at NASA's Jet Propulsion Laboratory in Pasadena, California. Since its arrival in 2004, the Cassini-Huygens mission has been a discovery machine, revolutionizing our knowledge of the Saturn system and captivating us with data and images never before obtained with such detail and clarity. On Sept. 15, 2017, operators will deliberately plunge the spacecraft into Saturn, as Cassini gathered science until the end. The “plunge” ensures Saturn’s moons will remain pristine for future exploration. During Cassini’s final days, mission team members from all around the world gathered at NASA’s Jet Propulsion Laboratory, Pasadena, California, to celebrate the achievements of this historic mission. Photo Credit: (NASA/Joel Kowsky)

Sneak Preview of April 25 Science at the Theater

ScienceCinema

Ho, Shirley

2017-12-12

Berkeley Lab astrophysicist Shirley Ho offers a sneak preview of the Science at the Theatre event at the Berkeley Repertory Theatre on April 25. Three Berkeley Lab cosmologists and Bay Area astronomer Andrew Fraiknoi will gather at the Berkeley Rep on Monday, April 25, from 7 to 9 p.m. to shed light on the mystery of the accelerating universe. Topics will include hunting down Type 1a supernovae, measuring the universe using baryon oscillation, and whether dark energy is the true driver of the universe. If you have questions for the scientists, post them below, send them to friendsofberkeleylab@lbl.gov, or catch us on facebook: http://www.facebook.com/video/video.php?v=10150215592292354&oid=593833429...Your question might be answered at the April 25 talk if there's time.

2015 Wind Technologies Market Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiser, Ryan; Bolinger, Mark; Barbose, Galen

This annual report--now in its tenth year--provides a detailed overview of developments and trends in the U.S. wind power market, with a particular focus on 2015. The report begins with an overview of key installation trends and then covers an array of industry and technology trends. The report also discusses project performance, wind turbine prices, project costs, operations and maintenance expenses, and prices paid for wind power in the United States. The report examines policy and market factors impacting the domestic wind power market and provides a preview of possible near-term market developments, expenses, and prices paid for wind powermore » in the United States. The report examines policy and market factors impacting the domestic wind power market and provides a preview of possible near-term market developments.« less

Cassini End of Mission Preview

NASA Image and Video Library

2017-09-13

A model of the Cassini-Huygens spacecraft is seen during a press conference previewing Cassini's End of Mission, Wednesday, Sept. 13, 2017 at NASA's Jet Propulsion Laboratory in Pasadena, California. Since its arrival in 2004, the Cassini-Huygens mission has been a discovery machine, revolutionizing our knowledge of the Saturn system and captivating us with data and images never before obtained with such detail and clarity. On Sept. 15, 2017, operators will deliberately plunge the spacecraft into Saturn, as Cassini gathered science until the end. The “plunge” ensures Saturn’s moons will remain pristine for future exploration. During Cassini’s final days, mission team members from all around the world gathered at NASA’s Jet Propulsion Laboratory, Pasadena, California, to celebrate the achievements of this historic mission. Photo Credit: (NASA/Joel Kowsky)

Cassini End of Mission Preview

NASA Image and Video Library

2017-09-13

Cassini project scientist at JPL, Linda Spilker speaks during a press conference previewing Cassini's End of Mission, Wednesday, Sept. 13, 2017 at NASA's Jet Propulsion Laboratory in Pasadena, California. Since its arrival in 2004, the Cassini-Huygens mission has been a discovery machine, revolutionizing our knowledge of the Saturn system and captivating us with data and images never before obtained with such detail and clarity. On Sept. 15, 2017, operators will deliberately plunge the spacecraft into Saturn, as Cassini gathered science until the end. The “plunge” ensures Saturn’s moons will remain pristine for future exploration. During Cassini’s final days, mission team members from all around the world gathered at NASA’s Jet Propulsion Laboratory, Pasadena, California, to celebrate the achievements of this historic mission. Photo Credit: (NASA/Joel Kowsky)

Cassini End of Mission Preview

NASA Image and Video Library

2017-09-13

director of NASA's Planetary Science Division, Jim Green answers questions a press conference previewing Cassini's End of Mission, Wednesday, Sept. 13, 2017 at NASA's Jet Propulsion Laboratory in Pasadena, California. Since its arrival in 2004, the Cassini-Huygens mission has been a discovery machine, revolutionizing our knowledge of the Saturn system and captivating us with data and images never before obtained with such detail and clarity. On Sept. 15, 2017, operators will deliberately plunge the spacecraft into Saturn, as Cassini gathered science until the end. The “plunge” ensures Saturn’s moons will remain pristine for future exploration. During Cassini’s final days, mission team members from all around the world gathered at NASA’s Jet Propulsion Laboratory, Pasadena, California, to celebrate the achievements of this historic mission. Photo Credit: (NASA/Joel Kowsky)

Cassini End of Mission Preview

NASA Image and Video Library

2017-09-13

Cassini program manager at JPL, Earl Maize, speaks during a press conference previewing Cassini's End of Mission, Wednesday, Sept. 13, 2017 at NASA's Jet Propulsion Laboratory in Pasadena, California. Since its arrival in 2004, the Cassini-Huygens mission has been a discovery machine, revolutionizing our knowledge of the Saturn system and captivating us with data and images never before obtained with such detail and clarity. On Sept. 15, 2017, operators will deliberately plunge the spacecraft into Saturn, as Cassini gathered science until the end. The “plunge” ensures Saturn’s moons will remain pristine for future exploration. During Cassini’s final days, mission team members from all around the world gathered at NASA’s Jet Propulsion Laboratory, Pasadena, California, to celebrate the achievements of this historic mission. Photo Credit: (NASA/Joel Kowsky)

GEOSAT Follow-On (GFO) Altimeter Document Series. Volume 5; Version 1; GFO Radar Altimeter Processing at Wallops Flight Facility

NASA Technical Reports Server (NTRS)

Lockwood, Dennis W.; Conger, A. M.

2003-01-01

This document is a compendium of the WFF GFO Software Development Team's knowledge regarding of GDO CAL/VAL Data. It includes many elements of a requirements document, a software specification document, a software design document, and a user's guide. In the more technical sections, this document assumes the reader is familiar with GFO and its CAL/VAL Data.

Evaluation and Validation (E&V) Team Public Report. Volume 5

DTIC Science & Technology

1990-10-31

aspects, software engineering practices, etc. The E&V requirements which are developed will be used to guide the E&V technical effort. The currently...interoperability of Ada software engineering environment tools and data. The scope of the CAIS-A includes the functionality affecting transportability that is...requirement that they be CAIS conforming tools or data. That is, for example numerous CIVC data exist on special purpose software currently available

A software tool for advanced MRgFUS prostate therapy planning and follow up

NASA Astrophysics Data System (ADS)

van Straaten, Dörte; Hoogenboom, Martijn; van Amerongen, Martinus J.; Weiler, Florian; Issawi, Jumana Al; Günther, Matthias; Fütterer, Jurgen; Jenne, Jürgen W.

2017-03-01

US guided HIFU/FUS ablation for the therapy of prostate cancer is a clinical established method, while MR guided HIFU/FUS applications for prostate recently started clinical evaluation. Even if MRI examination is an excellent diagnostic tool for prostate cancer, it is a time consuming procedure and not practicable within an MRgFUS therapy session. The aim of our ongoing work is to develop software to support therapy planning and post-therapy follow-up for MRgFUS on localized prostate cancer, based on multi-parametric MR protocols. The clinical workflow of diagnosis, therapy and follow-up of MR guided FUS on prostate cancer was deeply analyzed. Based on this, the image processing workflow was designed and all necessary components, e.g. GUI, viewer, registration tools etc. were defined and implemented. The software bases on MeVisLab with several implemented C++ modules for the image processing tasks. The developed software, called LTC (Local Therapy Control) will register and visualize automatically all images (T1w, T2w, DWI etc.) and ADC or perfusion maps gained from the diagnostic MRI session. This maximum of diagnostic information helps to segment all necessary ROIs, e.g. the tumor, for therapy planning. Final therapy planning will be performed based on these segmentation data in the following MRgFUS therapy session. In addition, the developed software should help to evaluate the therapy success, by synchronization and display of pre-therapeutic, therapy and follow-up image data including the therapy plan and thermal dose information. In this ongoing project, the first stand-alone prototype was completed and will be clinically evaluated.

Federal Emergency Management Information System (FEMIS) System Administration Guide for FEMIS Version 1.4.6

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arp, J.A.; Bower, J.C.; Burnett, R.A.

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and response tool that was developed by the Pacific Northwest National Laboratory (PNNL) under the direction of the U.S. Army Chemical Biological Defense Command. The FEMIS System Administration Guide provides information necessary for the system administrator to maintain the FEMIS system. The FEMIS system is designed for a single Chemical Stockpile Emergency Preparedness Program (CSEPP) site that has multiple Emergency Operations Centers (EOCs). Each EOC has personal computers (PCs) that emergency planners and operations personnel use to do their jobs. These PCs are corrected via a local areamore » network (LAN) to servers that provide EOC-wide services. Each EOC is interconnected to other EOCs via a Wide Area Network (WAN). Thus, FEMIS is an integrated software product that resides on client/server computer architecture. The main body of FEMIS software, referred to as the FEMIS Application Software, resides on the PC client(s) and is directly accessible to emergency management personnel. The remainder of the FEMIS software, referred to as the FEMIS Support Software, resides on the UNIX server. The Support Software provides the communication data distribution and notification functionality necessary to operate FEMIS in a networked, client/server environment.« less

Federal Emergency Management Information System (FEMIS), Installation Guide for FEMIS 1.4.6

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arp, J.A.; Burnett, R.A.; Carter, R.J.

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and response tool that was developed by the Pacific Northwest National Laboratory (PNNL) under the direction of the U.S. Army Chemical Biological Defense Command. The FEMIS System Administration Guide provides information necessary for the system administrator to maintain the FEMIS system. The FEMIS system is designed for a single Chemical Stockpile Emergency Preparedness Program (CSEPP) site that has multiple Emergency Operations Centers (EOCs). Each EOC has personal computers (PCs) that emergency planners and operations personnel use to do their jobs. These PCs are corrected via a local areamore » network (LAN) to servers that provide EOC-wide services. Each EOC is interconnected to other EOCs via a Wide Area Network (WAN). Thus, FEMIS is an integrated software product that resides on client/server computer architecture. The main body of FEMIS software, referred to as the FEMIS Application Software, resides on the PC client(s) and is directly accessible to emergency management personnel. The remainder of the FEMIS software, referred to as the FEMIS Support Software, resides on the UNIX server. The Support Software provides the communication data distribution and notification functionality necessary to operate FEMIS in a networked, client/server environment.« less

Federal Emergency Management Information System (FEMIS) Data Management Guide for FEMIS Version 1.4.6

DOE Office of Scientific and Technical Information (OSTI.GOV)

Angel, L.K.; Bower, J.C.; Burnett, R.A.

1999-06-29

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and response tool that was developed by the Pacific Northwest National Laboratory (PNNL) under the direction of the U.S. Army Chemical Biological Defense Command. The FEMIS System Administration Guide provides information necessary for the system administrator to maintain the FEMIS system. The FEMIS system is designed for a single Chemical Stockpile Emergency Preparedness Program (CSEPP) site that has multiple Emergency Operations Centers (EOCs). Each EOC has personal computers (PCs) that emergency planners and operations personnel use to do their jobs. These PCs are corrected via a local areamore » network (LAN) to servers that provide EOC-wide services. Each EOC is interconnected to other EOCs via a Wide Area Network (WAN). Thus, FEMIS is an integrated software product that resides on client/server computer architecture. The main body of FEMIS software, referred to as the FEMIS Application Software, resides on the PC client(s) and is directly accessible to emergency management personnel. The remainder of the FEMIS software, referred to as the FEMIS Support Software, resides on the UNIX server. The Support Software provides the communication data distribution and notification functionality necessary to operate FEMIS in a networked, client/server environment.« less

Field Guide for Designing Human Interaction with Intelligent Systems

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Thronesbery, Carroll G.

1998-01-01

The characteristics of this Field Guide approach address the problems of designing innovative software to support user tasks. The requirements for novel software are difficult to specify a priori, because there is not sufficient understanding of how the users' tasks should be supported, and there are not obvious pre-existing design solutions. When the design team is in unfamiliar territory, care must be taken to avoid rushing into detailed design, requirements specification, or implementation of the wrong product. The challenge is to get the right design and requirements in an efficient, cost-effective manner. This document's purpose is to describe the methods we are using to design human interactions with intelligent systems which support Space Shuttle flight controllers in the Mission Control Center at NASA/Johnson Space Center. Although these software systems usually have some intelligent features, the design challenges arise primarily from the innovation needed in the software design. While these methods are tailored to our specific context, they should be extensible, and helpful to designers of human interaction with other types of automated systems. We review the unique features of this context so that you can determine how to apply these methods to your project Throughout this Field Guide, goals of the design methods are discussed. This should help designers understand how a specific method might need to be adapted to the project at hand.

A networked modular hardware and software system for MRI-guided robotic prostate interventions

NASA Astrophysics Data System (ADS)

Su, Hao; Shang, Weijian; Harrington, Kevin; Camilo, Alex; Cole, Gregory; Tokuda, Junichi; Hata, Nobuhiko; Tempany, Clare; Fischer, Gregory S.

2012-02-01

Magnetic resonance imaging (MRI) provides high resolution multi-parametric imaging, large soft tissue contrast, and interactive image updates making it an ideal modality for diagnosing prostate cancer and guiding surgical tools. Despite a substantial armamentarium of apparatuses and systems has been developed to assist surgical diagnosis and therapy for MRI-guided procedures over last decade, the unified method to develop high fidelity robotic systems in terms of accuracy, dynamic performance, size, robustness and modularity, to work inside close-bore MRI scanner still remains a challenge. In this work, we develop and evaluate an integrated modular hardware and software system to support the surgical workflow of intra-operative MRI, with percutaneous prostate intervention as an illustrative case. Specifically, the distinct apparatuses and methods include: 1) a robot controller system for precision closed loop control of piezoelectric motors, 2) a robot control interface software that connects the 3D Slicer navigation software and the robot controller to exchange robot commands and coordinates using the OpenIGTLink open network communication protocol, and 3) MRI scan plane alignment to the planned path and imaging of the needle as it is inserted into the target location. A preliminary experiment with ex-vivo phantom validates the system workflow, MRI-compatibility and shows that the robotic system has a better than 0.01mm positioning accuracy.

VoCATS User Guide. [Draft.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education Services.

This guide focuses on use of the North Carolina Vocational Competency Achievement Tracking System (VoCATS)-designated software in the instructional management process. (VoCATS is a competency-based, computer-based instructional management system that allows the collection of data on student performance achievement prior to, during, and following…

Business Computer Programming I. Curriculum Guide. Second Edition.

ERIC Educational Resources Information Center

Patton, Jan

This guide provides instructors of business computer programming with a curriculum correlated directly to the office education essential elements mandated by the Texas Education Agency. Introductory materials include a scope and sequence and lists of suggested textbooks, resource books, software, audiovisuals, and magazines. Eleven units are…

Basics of Desktop Publishing. Teacher Edition.

ERIC Educational Resources Information Center

Beeby, Ellen

This color-coded teacher's guide contains curriculum materials designed to give students an awareness of various desktop publishing techniques before they determine their computer hardware and software needs. The guide contains six units, each of which includes some or all of the following basic components: objective sheet, suggested activities…

Evaluator's Guide for Microcomputer-Based Instructional Packages. Revised.

ERIC Educational Resources Information Center

International Council for Computers in Education, Eugene, OR.

Two instruments have been developed to aid teachers and other educators in evaluating educational software and courseware: the "Courseware Description" form and the "Courseware Evaluation" form. Complete instructions for using both forms are provided in this guide, along with the forms themselves. Prior to the instructions is…

A computer-guided minimally-invasive technique for orthodontic forced eruption of impacted canines.

PubMed

BERTELè, Matteo; Minniti, Paola P; Dalessandri, Domenico; Bonetti, Stefano; Visconti, Luca; Paganelli, Corrado

2016-06-01

The aim of this study was to develop a computer-guided minimally-invasive protocol for the surgical application of an orthodontic traction during the forced eruption of an impacted canine. 3Diagnosys® software was used to evaluate impacted canines position and to plan the surgical access, taking into account soft and hard tissues thickness, orthodontic traction path and presence of possible obstacles. Geomagic® software was used for reverse engineering and RhinocerosTM software was employed as three-dimensional modeller in preparing individualized surgical guides. Surgical access was gained flapless through the use of a mucosal punch for soft tissues, followed by a trephine bur with a pre-adjusted stop for bone path creation. A diamond bur mounted on SONICflex® 2003/L handpiece was used to prepare a 2-mm-deep calibrated hole into the canine enamel where a titanium screw connected with a stainless steel ligature was screwed. In-vitro pull-out tests, radiological and SEM analysis were realized in order to investigate screw stability and position. In two out of ten samples the screw was removed after the application of a 1-kg pull-out force. Radiological and SEM analysis demonstrated that all the screws were inserted into the enamel without affecting dentine integrity. This computer-guided minimally-invasive technique allowed a precise and reliable positioning of screws utilized during the orthodontic traction of impacted canines.

Visual attention and stability

PubMed Central

Mathôt, Sebastiaan; Theeuwes, Jan

2011-01-01

In the present review, we address the relationship between attention and visual stability. Even though with each eye, head and body movement the retinal image changes dramatically, we perceive the world as stable and are able to perform visually guided actions. However, visual stability is not as complete as introspection would lead us to believe. We attend to only a few items at a time and stability is maintained only for those items. There appear to be two distinct mechanisms underlying visual stability. The first is a passive mechanism: the visual system assumes the world to be stable, unless there is a clear discrepancy between the pre- and post-saccadic image of the region surrounding the saccade target. This is related to the pre-saccadic shift of attention, which allows for an accurate preview of the saccade target. The second is an active mechanism: information about attended objects is remapped within retinotopic maps to compensate for eye movements. The locus of attention itself, which is also characterized by localized retinotopic activity, is remapped as well. We conclude that visual attention is crucial in our perception of a stable world. PMID:21242140

Flipping organic chemistry course: Possibilities and challenges

NASA Astrophysics Data System (ADS)

Cha, J.; Kim, H. B.

2016-06-01

The flipped classroom approach was applied to an introductory organic chemistry course. A total of 76 video clips (15 hours of running time) were developed and delivered to 41 sophomores (21 females and 20 males) through Youtube in addition to the university's learning management system. The students were asked to preview the lecture contents before each class by watching a pre-class video. For in-class activities, exercise problems were presented to groups of 3-5 students. An instructor and a teaching assistant guided each group to solve problems cooperatively, monitored the students’ group activity and answered their questions. At the end of every chapter, the students were asked to evaluate their group work and personal preparedness for the class and also to write a short reflective journal. The muddiest point of each chapter, i.e., the topic posing the most difficulty to students’ understanding, was surveyed through Google Forms®. The students liked watching the videos before each class and performing student-centered, in-class group activities but a few limitations were also found and reported.

Preventing Exploits Against Software of Uncertain Provenance (PEASOUP)

DTIC Science & Technology

2015-05-01

Together with Strata’s fine-grained confinement, they build up a robust sandbox environment for SOUP that can resist most kind of exploits...Guide to the World’s Most Popular Disassembler. 2008: No Starch Press. 60. Christey, S., 2011 CWE/SANS top 25 most dangerous software errors

Software Engineering Laboratory (SEL). Data base organization and user's guide, revision 1

NASA Technical Reports Server (NTRS)

Lo, P. S.; Wyckoff, D.; Page, J.; Mcgarry, F. E.

1983-01-01

The structure of the Software Engineering Laboratory (SEL) data base is described. It defines each data base file in detail and provides information about how to access and use the data for programmers and other users. Several data base reporting programs are described also.

Computer Graphics: KidPix, the MacIntosh, and Students with Cognitive Disorders.

ERIC Educational Resources Information Center

Olson, Cindy

This teacher's guide provides an overview of KidPix software and contains adaptive applications of the software for Cognitively Disabled-Borderline (CDB) students. Ten lesson plans are given, including: (1) "USing Rubber Stamps/Rubber Stamp Editor"; (2) "Portrait"; (3) "Create a Pattern"; (4) "Garden Mural";…

Software development environment, appendix F

NASA Technical Reports Server (NTRS)

Riddle, W. E.

1980-01-01

The current status in the area of software development environments is assessed. The purposes of environments, the types of environments, the constituents of an environment, the issue of environment integration, and the problems which must be solved in preparing an environment are discussed. Some general maxims to guide near-term future work are proposed.

Evaluation of Farm Accounting Software. Improved Decision Making.

ERIC Educational Resources Information Center

Lovell, Ashley C., Comp.

This guide contains information on 36 computer programs used for farm and ranch accounting. This information and assessment of software features were provided by the manufacturers and vendors. Information is provided on the following items, among others: program name, vendor's name and address, computer and operating system, type of accounting and…

NASA Tech Briefs, December 1998. Volume 22, No. 12

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage section on design and analysis software, and sections on electronic components and circuits, electronic systems, software, materials, mechanics, machinery/automation, manufacturing/fabrication, physical sciences, and special sections of Photonics Tech Briefs, Motion Control Tech briefs and a Hot Technology File 1999 Resource Guide.

Buyers Guide: Communications Software--Overview; Ratings Digest; Reviews; Benchmarks.

ERIC Educational Resources Information Center

Lockwood, Russ; And Others

1988-01-01

Contains articles which review communications software. Includes "Crosstalk Mark 4,""ProComm,""Freeway Advanced,""Windows InTalk,""Relay Silver," and "Smartcom III." Compares in terms of text proprietary, MCI upload, Test ASCII, Spreadsheet Proprietary, Text XMODEM, Spreadsheet XMODEM, MCI Download, Documentation, Support and Service, ease of use,…

Computer Applications in Instruction: A Teacher's Guide to Selection and Use.

ERIC Educational Resources Information Center

Edwards, Judith B.; And Others

Intended for upper elementary and secondary teachers in all subject areas, this guide provides practical advice on determining the appropriate application of computer technology and on the selection of specific, subject-related computer-based instruction units. Under the heading of hardware and software, topics discussed include communicating with…

USER'S GUIDE FOR GLOED VERSION 1.0 - THE GLOBAL EMISSIONS DATABASE

EPA Science Inventory

The document is a user's guide for the EPA-developed, powerful software package, Global Emissions Database (GloED). GloED is a user-friendly, menu-driven tool for storing and retrieving emissions factors and activity data on a country-specific basis. Data can be selected from dat...

Using Microcomputers in Teaching Vocational Agriculture.

ERIC Educational Resources Information Center

Barrick, R. Kirby, Ed.

This collection of articles is designed to help vocational agriculture teachers use microcomputers in teaching. The guide covers both the different types of software and the ways they can be applied in teaching. The guide is organized in three sections. The first section covers types of programs and includes "Selection of Microcomputer Hardware…

The Music Industry Conference Guide for Music Educators. A Supplement to the Music Educators Journal.

ERIC Educational Resources Information Center

Music Educators Journal, 1988

1988-01-01

This supplement is a comprehensive guide to the music industry designed for music teachers. Included are tips for contacting music businesses and suggestions on ordering music, robes, instruments, computer software, and other supplies. Includes an annotated directory of Music Industry Conference members. (JDH)

Computer Aided Drafting. Instructor's Guide.

ERIC Educational Resources Information Center

Henry, Michael A.

This guide is intended for use in introducing students to the operation and applications of computer-aided drafting (CAD) systems. The following topics are covered in the individual lessons: understanding CAD (CAD versus traditional manual drafting and care of software and hardware); using the components of a CAD system (primary and other input…

A Planning Guide for Instructional Networks, Part I.

ERIC Educational Resources Information Center

Daly, Kevin F.

1994-01-01

Discusses three phases in implementing a master plan for a school-based local area network (LAN): (1) network software selection; (2) hardware selection, network topology, and site preparation; and (3) implementation time table. Sample planning and specification worksheets and a list of planning guides are included. (Contains six references.) (KRN)

Choosing an Optical Disc System: A Guide for Users and Resellers.

ERIC Educational Resources Information Center

Vane-Tempest, Stewart

1995-01-01

Presents a guide for selecting an optional disc system. Highlights include storage hierarchy; standards; data life cycles; security; implementing an optical jukebox system; optimizing the system; performance; quality and reliability; software; cost of online versus near-line; and growing opportunities. Sidebars provide additional information on…

Maxillo: Facial diagnosis

NASA Technical Reports Server (NTRS)

Reiskin, A. B.

1978-01-01

The application of the Lixiscope in dentistry was studied. Due to a problem in resolution, it is concluded that, at this present time, the Lixiscope can only be as a previewing device for conventional radiography.

Web Service

MedlinePlus

... on the relevance score as determined by the search engine. Generally, the first document in the first results ... Spanish . snippet Brief result summary generated by the search engine that provides a preview of the relevant content ...

Software Implemented Fault-Tolerant (SIFT) user's guide

NASA Technical Reports Server (NTRS)

Green, D. F., Jr.; Palumbo, D. L.; Baltrus, D. W.

1984-01-01

Program development for a Software Implemented Fault Tolerant (SIFT) computer system is accomplished in the NASA LaRC AIRLAB facility using a DEC VAX-11 to interface with eight Bendix BDX 930 flight control processors. The interface software which provides this SIFT program development capability was developed by AIRLAB personnel. This technical memorandum describes the application and design of this software in detail, and is intended to assist both the user in performance of SIFT research and the systems programmer responsible for maintaining and/or upgrading the SIFT programming environment.

Financial constraints in capacity planning: a national utility regulatory model (NUREG). Volume III of III: software description. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1981-10-29

This volume is the software description for the National Utility Regulatory Model (NUREG). This is the third of three volumes provided by ICF under contract number DEAC-01-79EI-10579. These three volumes are: a manual describing the NUREG methodology; a users guide; and a description of the software. This manual describes the software which has been developed for NUREG. This includes a listing of the source modules. All computer code has been written in FORTRAN.

CrossTalk. The Journal of Defense Software Engineering. Volume 23, Number 6, Nov/Dec 2010

DTIC Science & Technology

2010-11-01

Model of archi- tectural design. It guides developers to apply effort to their software architecture commensurate with the risks faced by...Driven Model is the promotion of risk to prominence. It is possible to apply the Risk-Driven Model to essentially any software development process...succeed without any planned architecture work, while many high-risk projects would fail without it . The Risk-Driven Model walks a middle path

Database Access Manager for the Software Engineering Laboratory (DAMSEL) user's guide

NASA Technical Reports Server (NTRS)

1990-01-01

Operating instructions for the Database Access Manager for the Software Engineering Laboratory (DAMSEL) system are presented. Step-by-step instructions for performing various data entry and report generation activities are included. Sample sessions showing the user interface display screens are also included. Instructions for generating reports are accompanied by sample outputs for each of the reports. The document groups the available software functions by the classes of users that may access them.

Topography Analysis and Visualization Software Supports a Guided Comparative Planetology Education Exhibit at the Smithsonian's Air and Space Museum

NASA Technical Reports Server (NTRS)

Roark, J. H.; Masuoka, C. M.; Frey, H. V.; Keller, J.; Williams, S.

2005-01-01

The Planetary Geodynamics Laboratory (http://geodynamics.gsfc.nasa.gov) of NASA s Goddard Space Flight Center designed, produced and recently delivered a "museum-friendly" version of GRIDVIEW, a grid visualization and analysis application, to the Smithsonian's National Air and Space Museum where it will be used in a guided comparative planetology education exhibit. The software was designed to enable museum visitors to interact with the same Earth and Mars topographic data and tools typically used by planetary scientists, and experience the thrill of discovery while learning about the geologic differences between Earth and Mars.

Eigensystem realization algorithm user's guide forVAX/VMS computers: Version 931216

NASA Technical Reports Server (NTRS)

Pappa, Richard S.

1994-01-01

The eigensystem realization algorithm (ERA) is a multiple-input, multiple-output, time domain technique for structural modal identification and minimum-order system realization. Modal identification is the process of calculating structural eigenvalues and eigenvectors (natural vibration frequencies, damping, mode shapes, and modal masses) from experimental data. System realization is the process of constructing state-space dynamic models for modern control design. This user's guide documents VAX/VMS-based FORTRAN software developed by the author since 1984 in conjunction with many applications. It consists of a main ERA program and 66 pre- and post-processors. The software provides complete modal identification capabilities and most system realization capabilities.

DiTour

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pelaia, II, Thomas A.

2014-06-05

it is common for facilities to have a lobby with a display loop while also requiring an option for guided tours. Existing solutions have required expensive hardware and awkward software. Our solution is relative low cost as it runs on an iPad connected to an external monitor, and our software provides an intuitive touch interface. The media files are downloaded from a web server onto the device allowing a mobile option (e.g. displays at conferences). Media may include arbitrary sequences of images, movies or PDF documents. Tour guides can select different tracks of slides to display and the presentation willmore » return to the default loop after a timeout.« less

A guide to the visual analysis and communication of biomolecular structural data.

PubMed

Johnson, Graham T; Hertig, Samuel

2014-10-01

Biologists regularly face an increasingly difficult task - to effectively communicate bigger and more complex structural data using an ever-expanding suite of visualization tools. Whether presenting results to peers or educating an outreach audience, a scientist can achieve maximal impact with minimal production time by systematically identifying an audience's needs, planning solutions from a variety of visual communication techniques and then applying the most appropriate software tools. A guide to available resources that range from software tools to professional illustrators can help researchers to generate better figures and presentations tailored to any audience's needs, and enable artistically inclined scientists to create captivating outreach imagery.

Battery Data MI Importer Template Quick Start Guide

NASA Technical Reports Server (NTRS)

Levinson, Laurie H.

2017-01-01

In order to ensure the persistent availability and reliability of test data generated over the course of the project, the M-SHELLS Project has decided to store acquired test data, as well as associated pedigree information, in the Granta Materials Intelligence (MI) database. To facilitate that effort, an importer template and associated graphical user interface (GUI) software have been developed, with this guide providing the operating instructions for their use. The template and automation software GUI are contained in the BatteryDataImporter.xlsm Excel workbook, and are to be used to import M-SHELLS summary, or pedigree, data and the associated raw test data results into an importer template-based file, formatted in such a way as to be ready for immediate upload to the Test Data: Battery Performance table of the Granta MI database. The provided GUI enables the user to select the appropriate summary data file(s), with each file containing the required information to identify any associated raw test data file(s) to be processed. In addition to describing the setup and operation of the importer template and GUI software, this guide also provides instructions for uploading processed data to the database and for viewing the data following upload.

Sexual Violence

MedlinePlus

... References 1. Black MC, Basile KC, Breiding MJ, Smith SG, Walters ML, Merrick MT, Chen J, Stevens ... cdc.gov/mmwr/preview/mmwrhtml/ss5806a1.htm 6. Smith SG. Breiding MJ. Chronic disease and health behaviours ...

Software engineering and Ada in design

NASA Technical Reports Server (NTRS)

Oneill, Don

1986-01-01

Modern software engineering promises significant reductions in software costs and improvements in software quality. The Ada language is the focus for these software methodology and tool improvements. The IBM FSD approach, including the software engineering practices that guide the systematic design and development of software products and the management of the software process are examined. The revised Ada design language adaptation is revealed. This four level design methodology is detailed including the purpose of each level, the management strategy that integrates the software design activity with the program milestones, and the technical strategy that maps the Ada constructs to each level of design. A complete description of each design level is provided along with specific design language recording guidelines for each level. Finally, some testimony is offered on education, tools, architecture, and metrics resulting from project use of the four level Ada design language adaptation.

Software Model Checking Without Source Code

NASA Technical Reports Server (NTRS)

Chaki, Sagar; Ivers, James

2009-01-01

We present a framework, called AIR, for verifying safety properties of assembly language programs via software model checking. AIR extends the applicability of predicate abstraction and counterexample guided abstraction refinement to the automated verification of low-level software. By working at the assembly level, AIR allows verification of programs for which source code is unavailable-such as legacy and COTS software-and programs that use features-such as pointers, structures, and object-orientation-that are problematic for source-level software verification tools. In addition, AIR makes no assumptions about the underlying compiler technology. We have implemented a prototype of AIR and present encouraging results on several non-trivial examples.

Cassini End of Mission Preview

NASA Image and Video Library

2017-09-13

Cassini program manager at JPL, Earl Maize, center, answers questions from members of the media during a press conference previewing Cassini's End of Mission, Wednesday, Sept. 13, 2017 at NASA's Jet Propulsion Laboratory in Pasadena, California. Since its arrival in 2004, the Cassini-Huygens mission has been a discovery machine, revolutionizing our knowledge of the Saturn system and captivating us with data and images never before obtained with such detail and clarity. On Sept. 15, 2017, operators will deliberately plunge the spacecraft into Saturn, as Cassini gathered science until the end. The “plunge” ensures Saturn’s moons will remain pristine for future exploration. During Cassini’s final days, mission team members from all around the world gathered at NASA’s Jet Propulsion Laboratory, Pasadena, California, to celebrate the achievements of this historic mission. Photo Credit: (NASA/Joel Kowsky)

Cassini End of Mission Preview

NASA Image and Video Library

2017-09-13

A model of the Cassini-Huygens spacecraft is seen in the von Kármán Auditorium during a press conference previewing Cassini's End of Mission, Wednesday, Sept. 13, 2017 at NASA's Jet Propulsion Laboratory in Pasadena, California. Since its arrival in 2004, the Cassini-Huygens mission has been a discovery machine, revolutionizing our knowledge of the Saturn system and captivating us with data and images never before obtained with such detail and clarity. On Sept. 15, 2017, operators will deliberately plunge the spacecraft into Saturn, as Cassini gathered science until the end. The “plunge” ensures Saturn’s moons will remain pristine for future exploration. During Cassini’s final days, mission team members from all around the world gathered at NASA’s Jet Propulsion Laboratory, Pasadena, California, to celebrate the achievements of this historic mission. Photo Credit: (NASA/Joel Kowsky)

Sneak Preview of April 25 Science at the Theater

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ho, Shirley

Berkeley Lab astrophysicist Shirley Ho offers a sneak preview of the Science at the Theatre event at the Berkeley Repertory Theatre on April 25. Three Berkeley Lab cosmologists and Bay Area astronomer Andrew Fraiknoi will gather at the Berkeley Rep on Monday, April 25, from 7 to 9 p.m. to shed light on the mystery of the accelerating universe. Topics will include hunting down Type 1a supernovae, measuring the universe using baryon oscillation, and whether dark energy is the true driver of the universe. If you have questions for the scientists, post them below, send them to friendsofberkeleylab@lbl.gov, or catchmore » us on facebook: http://www.facebook.com/video/video.php?v=10150215592292354&oid=593833429...Your question might be answered at the April 25 talk if there's time.« less

Cassini End of Mission Preview

NASA Image and Video Library

2017-09-13

Principle investigator for the Neutral Mass Spectrometer (INMS) at the Southwest Research Institute, Hunter Waites, peaks during a press conference previewing Cassini's End of Mission, Wednesday, Sept. 13, 2017 at NASA's Jet Propulsion Laboratory in Pasadena, California. Since its arrival in 2004, the Cassini-Huygens mission has been a discovery machine, revolutionizing our knowledge of the Saturn system and captivating us with data and images never before obtained with such detail and clarity. On Sept. 15, 2017, operators will deliberately plunge the spacecraft into Saturn, as Cassini gathered science until the end. The “plunge” ensures Saturn’s moons will remain pristine for future exploration. During Cassini’s final days, mission team members from all around the world gathered at NASA’s Jet Propulsion Laboratory, Pasadena, California, to celebrate the achievements of this historic mission. Photo Credit: (NASA/Joel Kowsky)

Cassini End of Mission Preview

NASA Image and Video Library

2017-09-13

Cassini project scientist at JPL, Linda Spilker, right, looks on as Cassini program manager at JPL, Earl Maize speaks during a press conference previewing Cassini's End of Mission, Wednesday, Sept. 13, 2017 at NASA's Jet Propulsion Laboratory in Pasadena, California. Since its arrival in 2004, the Cassini-Huygens mission has been a discovery machine, revolutionizing our knowledge of the Saturn system and captivating us with data and images never before obtained with such detail and clarity. On Sept. 15, 2017, operators will deliberately plunge the spacecraft into Saturn, as Cassini gathered science until the end. The “plunge” ensures Saturn’s moons will remain pristine for future exploration. During Cassini’s final days, mission team members from all around the world gathered at NASA’s Jet Propulsion Laboratory, Pasadena, California, to celebrate the achievements of this historic mission. Photo Credit: (NASA/Joel Kowsky)

PREVIEW: Prevention of Diabetes through Lifestyle Intervention and Population Studies in Europe and around the World. Design, Methods, and Baseline Participant Description of an Adult Cohort Enrolled into a Three-Year Randomised Clinical Trial

PubMed Central

Fogelholm, Mikael; Larsen, Thomas Meinert; Westerterp-Plantenga, Margriet; Macdonald, Ian; Martinez, J. Alfredo; Boyadjieva, Nadka; Poppitt, Sally; Schlicht, Wolfgang; Stratton, Gareth; Sundvall, Jouko; Lam, Tony; Jalo, Elli; Christensen, Pia; Drummen, Mathijs; Simpson, Elizabeth; Navas-Carretero, Santiago; Handjieva-Darlenska, Teodora; Muirhead, Roslyn; Silvestre, Marta P.; Kahlert, Daniela; Pastor-Sanz, Laura; Brand-Miller, Jennie; Raben, Anne

2017-01-01

Type-2 diabetes (T2D) is one of the fastest growing chronic diseases worldwide. The PREVIEW project has been initiated to find the most effective lifestyle (diet and physical activity) for the prevention of T2D, in overweight and obese participants with increased risk for T2D. The study is a three-year multi-centre, 2 × 2 factorial, randomised controlled trial. The impact of a high-protein, low-glycaemic index (GI) vs. moderate protein, moderate-GI diet in combination with moderate or high-intensity physical activity on the incidence of T2D and the related clinical end-points are investigated. The intervention started with a two-month weight reduction using a low-calorie diet, followed by a randomised 34-month weight maintenance phase comprising four treatment arms. Eight intervention centres are participating (Denmark, Finland, United Kingdom, The Netherlands, Spain, Bulgaria, Australia, and New Zealand). Data from blood specimens, urine, faeces, questionnaires, diaries, body composition assessments, and accelerometers are collected at months 0, 2, 6, 12, 18, 24, and 36. In total, 2326 adults were recruited. The mean age was 51.6 (SD 11.6) years, 67% were women. PREVIEW is, to date, the largest multinational trial to address the prevention of T2D in pre-diabetic adults through diet and exercise intervention. Participants will complete the final intervention in March, 2018. PMID:28632180

PREVIEW: Prevention of Diabetes through Lifestyle Intervention and Population Studies in Europe and around the World. Design, Methods, and Baseline Participant Description of an Adult Cohort Enrolled into a Three-Year Randomised Clinical Trial.

PubMed

Fogelholm, Mikael; Larsen, Thomas Meinert; Westerterp-Plantenga, Margriet; Macdonald, Ian; Martinez, J Alfredo; Boyadjieva, Nadka; Poppitt, Sally; Schlicht, Wolfgang; Stratton, Gareth; Sundvall, Jouko; Lam, Tony; Jalo, Elli; Christensen, Pia; Drummen, Mathijs; Simpson, Elizabeth; Navas-Carretero, Santiago; Handjieva-Darlenska, Teodora; Muirhead, Roslyn; Silvestre, Marta P; Kahlert, Daniela; Pastor-Sanz, Laura; Brand-Miller, Jennie; Raben, Anne

2017-06-20

Type-2 diabetes (T2D) is one of the fastest growing chronic diseases worldwide. The PREVIEW project has been initiated to find the most effective lifestyle (diet and physical activity) for the prevention of T2D, in overweight and obese participants with increased risk for T2D. The study is a three-year multi-centre, 2 × 2 factorial, randomised controlled trial. The impact of a high-protein, low-glycaemic index (GI) vs. moderate protein, moderate-GI diet in combination with moderate or high-intensity physical activity on the incidence of T2D and the related clinical end-points are investigated. The intervention started with a two-month weight reduction using a low-calorie diet, followed by a randomised 34-month weight maintenance phase comprising four treatment arms. Eight intervention centres are participating (Denmark, Finland, United Kingdom, The Netherlands, Spain, Bulgaria, Australia, and New Zealand). Data from blood specimens, urine, faeces, questionnaires, diaries, body composition assessments, and accelerometers are collected at months 0, 2, 6, 12, 18, 24, and 36. In total, 2326 adults were recruited. The mean age was 51.6 (SD 11.6) years, 67% were women. PREVIEW is, to date, the largest multinational trial to address the prevention of T2D in pre-diabetic adults through diet and exercise intervention. Participants will complete the final intervention in March, 2018.

Software-Based Scoring and Sound Design: An Introductory Guide for Music Technology Instruction

ERIC Educational Resources Information Center

Walzer, Daniel A.

2016-01-01

This article explores the creative function of virtual instruments, sequencers, loops, and software-based synthesizers to introduce basic scoring and sound design concepts for visual media in an introductory music technology course. Using digital audio workstations with user-focused and configurable options, novice composers can hone a broad range…

Software design and documentation language: User's guide for SDDL release 4

NASA Technical Reports Server (NTRS)

Zepko, T. M.

1981-01-01

The changes introduced in the PASCAL implementation of the software design and documentation language are described. These changes include a number of new capabilities, plus some changes to make the language more consistent and easier to use. Incompatibilities with earlier versions are limited to certain of the directive statements.

Introduction to Financial Projection Models. Business Management Instructional Software.

ERIC Educational Resources Information Center

Pomeroy, Robert W., III

This guidebook and teacher's guide accompany a personal computer software program and introduce the key elements of financial projection modeling to project the financial statements of an industrial enterprise. The student will then build a model on an electronic spreadsheet. The guidebook teaches the purpose of a financial model and the steps…

Technology-Based Literature Plans for Elementary Students (Technology Links to Literacy).

ERIC Educational Resources Information Center

Wepner, Shelley B.

1991-01-01

Presents ideas for incorporating software into each guided reading phase for two realistic fiction books: Lois Lowry's "Anastasia on Her Own" and Barthe DeClements's "The Fourth Grade Wizards." Discusses how each skeletal plan uses three pieces of software to enliven students' oral and written thoughts about the books'…

Laser velocimeter data acquisition system for the Langley 14- by 22-foot subsonic tunnel. Software reference guide version 3.3

NASA Technical Reports Server (NTRS)

Jumper, Judith K.

1994-01-01

The Laser Velocimeter Data Acquisition System (LVDAS) in the Langley 14- by 22-Foot Tunnel is controlled by a comprehensive software package. The software package was designed to control the data acquisition process during wind tunnel tests which employ a laser velocimeter measurement system. This report provides detailed explanations on how to configure and operate the LVDAS system to acquire laser velocimeter and static wind tunnel data.

State-of-the-art Hydrology Education: Development of Windows-based and Web-based Interactive Teaching-Learning Software

NASA Astrophysics Data System (ADS)

Chu, X.

2011-12-01

This study, funded by the NSF CAREER program, focuses on developing new methods to quantify microtopography-controlled overland flow processes and integrating the cutting-edge hydrologic research with all-level education and outreach activities. To achieve the educational goal, an interactive teaching-learning software package has been developed. This software, with enhanced visualization capabilities, integrates the new modeling techniques, computer-guided learning processes, and education-oriented tools in a user-friendly interface. Both Windows-based and web-based versions have been developed. The software is specially designed for three major user levels: elementary level (Level 1: K-12 and outreach education), medium level (Level 2: undergraduate education), and advanced level (Level 3: graduate education). Depending on the levels, users are guided to different educational systems. Each system consists of a series of mini "libraries" featured with movies, pictures, and documentation that cover fundamental theories, varying scale experiments, and computer modeling of overland flow generation, surface runoff, and infiltration processes. Testing and practical use of this educational software in undergraduate and graduate teaching demonstrate its effectiveness to promote students' learning and interest in hydrologic sciences. This educational software also has been used as a hydrologic demonstration tool for K-12 students and Native American students through the Nurturing American Tribal Undergraduate Research Education (NATURE) program and Science, Technology, Engineering and Mathematics (STEM) outreach activities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malczynski, Leonard A.

This guide addresses software quality in the construction of Powersim{reg_sign} Studio 8 system dynamics simulation models. It is the result of almost ten years of experience with the Powersim suite of system dynamics modeling tools (Constructor and earlier Studio versions). It is a guide that proposes a common look and feel for the construction of Powersim Studio system dynamics models.

Home Economics. Education for Technology Employment.

ERIC Educational Resources Information Center

Northern Illinois Univ., De Kalb. Dept. of Technology.

This guide was developed in an Illinois program to help home economics teachers integrate the use of computers and program-related software into existing programs. After students are taught the basic computer skills outlined in the beginning of the guide, 50 learning activities can be used as an integral part of the instructional program. (One or…

METAPHOR: Programmer's guide, Version 1

NASA Technical Reports Server (NTRS)

Furchtgott, D. G.

1979-01-01

The internal structure of the Michigan Evaluation Aid for Perphormability (METAPHOR), an interactive software package to facilitate performability modeling and evaluation is described. Revised supplemented guides are prepared in order to maintain an up-to-date documentation of the system. Programmed tools to facilitate each step of performability model construction and model solution are given.

SOSS User Guide

NASA Technical Reports Server (NTRS)

Zhu, Zhifan; Gridnev, Sergei; Windhorst, Robert D.

2015-01-01

This User Guide describes SOSS (Surface Operations Simulator and Scheduler) software build and graphic user interface. SOSS is a desktop application that simulates airport surface operations in fast time using traffic management algorithms. It moves aircraft on the airport surface based on information provided by scheduling algorithm prototypes, monitors separation violation and scheduling conformance, and produces scheduling algorithm performance data.

Navigation with Electromagnetic Tracking for Interventional Radiology Procedures

PubMed Central

Wood, Bradford J.; Zhang, Hui; Durrani, Amir; Glossop, Neil; Ranjan, Sohan; Lindisch, David; Levy, Eliott; Banovac, Filip; Borgert, Joern; Krueger, Sascha; Kruecker, Jochen; Viswanathan, Anand; Cleary, Kevin

2008-01-01

PURPOSE To assess the feasibility of the use of preprocedural imaging for guide wire, catheter, and needle navigation with electromagnetic tracking in phantom and animal models. MATERIALS AND METHODS An image-guided intervention software system was developed based on open-source software components. Catheters, needles, and guide wires were constructed with small position and orientation sensors in the tips. A tetrahedral-shaped weak electromagnetic field generator was placed in proximity to an abdominal vascular phantom or three pigs on the angiography table. Preprocedural computed tomographic (CT) images of the phantom or pig were loaded into custom-developed tracking, registration, navigation, and rendering software. Devices were manipulated within the phantom or pig with guidance from the previously acquired CT scan and simultaneous real-time angiography. Navigation within positron emission tomography (PET) and magnetic resonance (MR) volumetric datasets was also performed. External and endovascular fiducials were used for registration in the phantom, and registration error and tracking error were estimated. RESULTS The CT scan position of the devices within phantoms and pigs was accurately determined during angiography and biopsy procedures, with manageable error for some applications. Preprocedural CT depicted the anatomy in the region of the devices with real-time position updating and minimal registration error and tracking error (<5 mm). PET can also be used with this system to guide percutaneous biopsies to the most metabolically active region of a tumor. CONCLUSIONS Previously acquired CT, MR, or PET data can be accurately codisplayed during procedures with reconstructed imaging based on the position and orientation of catheters, guide wires, or needles. Multimodality interventions are feasible by allowing the real-time updated display of previously acquired functional or morphologic imaging during angiography, biopsy, and ablation. PMID:15802449

Three-dimensional surgical modelling with an open-source software protocol: study of precision and reproducibility in mandibular reconstruction with the fibula free flap.

PubMed

Ganry, L; Quilichini, J; Bandini, C M; Leyder, P; Hersant, B; Meningaud, J P

2017-08-01

Very few surgical teams currently use totally independent and free solutions to perform three-dimensional (3D) surgical modelling for osseous free flaps in reconstructive surgery. This study assessed the precision and technical reproducibility of a 3D surgical modelling protocol using free open-source software in mandibular reconstruction with fibula free flaps and surgical guides. Precision was assessed through comparisons of the 3D surgical guide to the sterilized 3D-printed guide, determining accuracy to the millimetre level. Reproducibility was assessed in three surgical cases by volumetric comparison to the millimetre level. For the 3D surgical modelling, a difference of less than 0.1mm was observed. Almost no deformations (<0.2mm) were observed post-autoclave sterilization of the 3D-printed surgical guides. In the three surgical cases, the average precision of fibula free flap modelling was between 0.1mm and 0.4mm, and the average precision of the complete reconstructed mandible was less than 1mm. The open-source software protocol demonstrated high accuracy without complications. However, the precision of the surgical case depends on the surgeon's 3D surgical modelling. Therefore, surgeons need training on the use of this protocol before applying it to surgical cases; this constitutes a limitation. Further studies should address the transfer of expertise. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Guide surgery osteotomy system (GSOS) a new device for treatment in orthognathic surgery.

PubMed

Salvato, Giuseppe; Chiavenna, Carlo; Meazzini, Maria Costanza

2014-04-01

This article proposes an innovative and revolutionary diagnostic and therapeutic protocol for performing dentoalveolar osteotomies in office under local anaesthesia with piezoelectric surgery using a surgical acrylic guide produced through software-based planning. The method was applied in the correction of crossbites, changing in the curve of Spee, incisal decompensations and dental ankylosis. Performing a preoperative CT with a special splint, optical scanning of the models and the subsequent planning with software has enabled us to produce a model with rapid prototyping with the design of the osteotomy on which the surgical guide was shaped, the use of the guide associated with piezoelectric surgery, allowed to perform surgery under local anaesthesia, with minimal invasiveness and high accuracy. Dentoalveolar immediate movements, with preservation of the roots of teeth involved, allow for rapid treatment of malocclusions which would be long and often difficult if not impossible to treat with orthodontics only. Dentoalveolar osteotomies associated to osteodistraction concepts, allow the orthodontist to achieve with accuracy the objectives required by the treatment plan. GSOS is a new method, which, utilizing 3D optical scanning images of models, software and piezoelectric surgery, allows to perform dentoalveolar movements which may be dangerous to the roots or for the periodontal support, with orthodontics only. It dramatically reduces total surgical-orthodontic treatment time, with obvious great patient satisfaction. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Practical Issues in Implementing Software Reliability Measurement

NASA Technical Reports Server (NTRS)

Nikora, Allen P.; Schneidewind, Norman F.; Everett, William W.; Munson, John C.; Vouk, Mladen A.; Musa, John D.

1999-01-01

Many ways of estimating software systems' reliability, or reliability-related quantities, have been developed over the past several years. Of particular interest are methods that can be used to estimate a software system's fault content prior to test, or to discriminate between components that are fault-prone and those that are not. The results of these methods can be used to: 1) More accurately focus scarce fault identification resources on those portions of a software system most in need of it. 2) Estimate and forecast the risk of exposure to residual faults in a software system during operation, and develop risk and safety criteria to guide the release of a software system to fielded use. 3) Estimate the efficiency of test suites in detecting residual faults. 4) Estimate the stability of the software maintenance process.

S&TR Preview: Groundbreaking Laser Set to Energize Science

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haefner, Constantin

The High-Repetition-Rate Advanced Petawatt Laser System (HAPLS) is designed to fire 10 times per second, which represents a major advancement over existing petawatt lasers and opens the door to new scientific discoveries.

An Administrative View of College Bookstores in the Eighties.

ERIC Educational Resources Information Center

Smith, R. Eugene

1979-01-01

A preview of the college bookstore in the eighties includes a discussion of text and tradebooks; profit-makers (such as imprinted clothing and cosmetics); the college store inventory; pilferage; and overhead expenses. (PHR)

Software requirements specification for the GIS-T/ISTEA pooled fund study phase C linear referencing engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amai, W.; Espinoza, J. Jr.; Fletcher, D.R.

1997-06-01

This Software Requirements Specification (SRS) describes the features to be provided by the software for the GIS-T/ISTEA Pooled Fund Study Phase C Linear Referencing Engine project. This document conforms to the recommendations of IEEE Standard 830-1984, IEEE Guide to Software Requirements Specification (Institute of Electrical and Electronics Engineers, Inc., 1984). The software specified in this SRS is a proof-of-concept implementation of the Linear Referencing Engine as described in the GIS-T/ISTEA pooled Fund Study Phase B Summary, specifically Sheet 13 of the Phase B object model. The software allows an operator to convert between two linear referencing methods and a datummore » network.« less

Visual DMDX: A web-based authoring tool for DMDX, a Windows display program with millisecond accuracy.

PubMed

Garaizar, Pablo; Reips, Ulf-Dietrich

2015-09-01

DMDX is a software package for the experimental control and timing of stimulus display for Microsoft Windows systems. DMDX is reliable, flexible, millisecond accurate, and can be downloaded free of charge; therefore it has become very popular among experimental researchers. However, setting up a DMDX-based experiment is burdensome because of its command-based interface. Further, DMDX relies on RTF files in which parts of the stimuli, design, and procedure of an experiment are defined in a complicated (DMASTR-compatible) syntax. Other experiment software, such as E-Prime, Psychopy, and WEXTOR, became successful as a result of integrated visual authoring tools. Such an intuitive interface was lacking for DMDX. We therefore created and present here Visual DMDX (http://visualdmdx.com/), a HTML5-based web interface to set up experiments and export them to DMDX item files format in RTF. Visual DMDX offers most of the features available from the rich DMDX/DMASTR syntax, and it is a useful tool to support researchers who are new to DMDX. Both old and modern versions of DMDX syntax are supported. Further, with Visual DMDX, we go beyond DMDX by having added export to JSON (a versatile web format), easy backup, and a preview option for experiments. In two examples, one experiment each on lexical decision making and affective priming, we explain in a step-by-step fashion how to create experiments using Visual DMDX. We release Visual DMDX under an open-source license to foster collaboration in its continuous improvement.

NASA Tech Briefs, April 2002. Volume 26, No. 4

NASA Technical Reports Server (NTRS)

2002-01-01

The contents include: 1) Application Briefs; 2) Sneak Preview of Sensors Expo; 3) The Complexity of the Diagnosis Problem; 4) Design Concepts for the ISS TransHab Module; 5) Characteristics of Supercritical Transitional Mixing Layers; 6) Electrometer for Triboelectric Evaluation of Materials; 7) Infrared CO2 Sensor With Built-In Calibration Chambers; 8) Solid-State Potentiometric CO Sensor; 9) Planetary Rover Absolute Heading Detection Using a Sun Sensor; 10) Concept for Utilizing Full Areas of STJ Photodetector Arrays; 11) Development of Cognitive Sensors; 12) Enabling Higher-Voltage Operation of SOl CMOS Transistors; 13) Estimating Antenna-Pointing Errors From Beam Squints; 14) Advanced-Fatigue-Crack-Growth and Fracture- Mechanics Program; 15) Software for Sequencing Spacecraft Actions; 16) Program Distributes and Tracks Organizational Memoranda; 16) Flat Membrane Device for Dehumidification of Air; 17) Inverted Hindle Mount Reduces Sag of a Large, Precise Mirror; 18) Heart-Pump-Outlet/Cannula Coupling; 19) Externally Triggered Microcapsules Release Drugs In Situ; 20) Combinatorial Drug Design Augmented by Information Theory; 21) Multiple-Path-Length Optical Absorbance Cell; 22) Model of a Fluidized Bed Containing a Mixture of Particles; 23) Refractive Secondary Concentrators for Solar Thermal Systems; 24) Cold Flow Calorimeter; 25) Methodology for Tracking Hazards and Predicting Failures; 26) Estimating Heterodyne-Interferometer Polarization Leakage; 27) An Efficient Algorithm for Propagation of Temporal- Constraint Networks; 28) Software for Continuous Replanning During Execution; 29) Surface-Launched Explorers for Reconnaissance/Scouting; 30) Firmware for a Small Motion-Control Processor; 31) Gear Bearings and Gear-Bearing Transmissions; and 32) Linear Dynamometer With Variable Stroke and Frequency.

Analysis of small-bowel capsule endoscopy reading by using Quickview mode: training assistants for reading may produce a high diagnostic yield and save time for physicians.

PubMed

Shiotani, Akiko; Honda, Keisuke; Kawakami, Makiko; Kimura, Yoshiki; Yamanaka, Yoshiyuki; Fujita, Minoru; Matsumoto, Hiroshi; Tarumi, Ken-ichi; Manabe, Noriaki; Haruma, Ken

2012-01-01

The aim was to investigate the clinical utility of RAPID Access 6.5 Quickview software and to evaluate whether preview of the capsule endoscopy video by a trained nurse could detect significant lesions accurately compared with endoscopists. As reading capsule endoscopy is time consuming, one possible cost-effective strategy could be the use of trained nonphysicians or newly available software to preread and identify potentially important capsule images. The 100 capsule images of a variety of significant lesions from 87 patients were investigated. The minimum percentages for settings of sensitivity that could pick up the selected images and the detection rate for significant lesions by a well-trained nurse, two endoscopists with limited experience in reading, and one well-trained physician were examined. The frequency of the selected lesions picked up by Quickview mode using percentages for sensitivity settings of 5%, 15%, 25%, and 35% were 61%, 74%, 93%, and 98%, respectively. The percentages for sensitivity significantly correlated (r=0.78, P<0.001) with the reading time. The detection rate by the nurse or the well-trained physician was significantly higher than that by the physician with limited capsule experience (87% and 84.1% vs. 62.7%; P<0.01). The clinical use of Quickview at 25% did not significantly improve the detection rate. Quickview mode can reduce reading time but has an unacceptably miss rate for potentially important lesions. Use of a trained nonphysician assistant can reduce physician's time and improve diagnostic yield.

Integrated Power, Avionics, and Software (iPAS) Space Telecommunications Radio System (STRS) Radio User's Guide -- Advanced Exploration Systems (AES)

NASA Technical Reports Server (NTRS)

Roche, Rigoberto; Shalkhauser, Mary Jo Windmille

2017-01-01

The Integrated Power, Avionics and Software (IPAS) software defined radio (SDR) was implemented on the Reconfigurable, Intelligently-Adaptive Communication System (RAICS) platform, for radio development at NASA Johnson Space Center. Software and hardware description language (HDL) code were delivered by NASA Glenn Research Center for use in the IPAS test bed and for development of their own Space Telecommunications Radio System (STRS) waveforms on the RAICS platform. The purpose of this document is to describe how to setup and operate the IPAS STRS Radio platform with its delivered test waveform.

A system for beach video-monitoring: Beachkeeper plus

NASA Astrophysics Data System (ADS)

Brignone, Massimo; Schiaffino, Chiara F.; Isla, Federico I.; Ferrari, Marco

2012-12-01

A suitable knowledge of coastal systems, of their morphodynamic characteristics and their response to storm events and man-made structures is essential for littoral conservation and management. Nowadays webcams represent a useful device to obtain information from beaches. Video-monitoring techniques are generally site specific and softwares working with any image acquisition system are rare. Therefore, this work aims at submitting theory and applications of an experimental video monitoring software: Beachkeeper plus, a freeware non-profit software, can be employed and redistributed without modifications. A license file is provided inside software package and in the user guide. Beachkeeper plus is based on Matlab® and it can be used for the analysis of images and photos coming from any kind of acquisition system (webcams, digital cameras or images downloaded from internet), without any a-priori information or laboratory study of the acquisition system itself. Therefore, it could become a useful tool for beach planning. Through a simple guided interface, images can be analyzed by performing georeferentiation, rectification, averaging and variance. This software was initially operated in Pietra Ligure (Italy), using images from a tourist webcam, and in Mar del Plata (Argentina) using images from a digital camera. In both cases the reliability in different geomorphologic and morphodynamic conditions was confirmed by the good quality of obtained images after georeferentiation, rectification and averaging.

An Instructional Feedback Technique for Teaching Project Management Tools Aligned With PMBOK

ERIC Educational Resources Information Center

Goncalves, Rafael Queiroz; von Wangenheim, Christiane A. Gresse; Hauck, Jean C. R.; Zanella, Andreia

2018-01-01

Contribution: An approach is presented to provide contextualized feedback for students using a project management (PM) tool. This approach covers the ten PM knowledge areas, guiding students through the planning of software projects. Background: Because software PM is unfeasible without the support of a PM tool there is a growing demand that these…

Computerized Placement Management Software (CPMS): User Manual, Version 3.0.

ERIC Educational Resources Information Center

College Entrance Examination Board, Princeton, NJ.

This guide is designed to enable the beginner, as well as the advanced user, to understand and use the Computerized Placement Management Software (CPMS). The CPMS is a system for evaluating information about students and recommending their placement into courses best suited for them. It also tracks their progress and maintains their records. The…

Florida specific NTCIP MIB development for actuated signal controller (ASC), closed-circuit television (CCTV), and center-to-center (C2C) communications with SunGuideSM software and ITS device test procedure development : summary of final report.

DOT National Transportation Integrated Search

2009-06-01

To provide hardware, software, network, systems research, and testing for multi-million dollar traffic : operations, Intelligent Transportation Systems (ITS), and statewide communications investments, the : Traffic Engineering and Operations Office h...

Florida specific NTCIP MIB development for actuated signal controller (ASC), closed-circuit television (CCTV), and center-to-center (C2C) communications with SunGuideSM software and ITS device test procedure development : executive summary.

DOT National Transportation Integrated Search

2009-06-01

To provide hardware, software, network, systems research, and testing for multi-million : dollar traffic operations, Intelligent Transportation Systems (ITS), and statewide : communications investments, the Traffic Engineering and Operations Office h...

A Practical Guide to the Technology and Adoption of Software Process Automation

DTIC Science & Technology

1994-03-01

IDE’s integration of Software through Pictures, CodeCenter, and FrameMaker ). However, successful use of in- tegrated tools, as reflected in actual...tool for a specific platform. Thus, when a Work Context calls for a word processor, the weaver.tis file can be set up to call FrameMaker for the Sun4

A Consumer's Guide to Benchmark Dose Models: Results of U.S. EPA Testing of 14 Dichotomous, 8 Continuous, and 6 Developmental Models (Presentation)

EPA Science Inventory

Benchmark dose risk assessment software (BMDS) was designed by EPA to generate dose-response curves and facilitate the analysis, interpretation and synthesis of toxicological data. Partial results of QA/QC testing of the EPA benchmark dose software (BMDS) are presented. BMDS pr...

Users guide for FRCS: fuel reduction cost simulator software.

Treesearch

Roger D. Fight; Bruce R. Hartsough; Peter Noordijk

2006-01-01

The Fuel Reduction Cost Simulator (FRCS) spreadsheet application is public domain software used to estimate costs for fuel reduction treatments involving removal of trees of mixed sizes in the form of whole trees, logs, or chips from a forest. Equipment production rates were developed from existing studies. Equipment operating cost rates are from December 2002 prices...

An instructional guide for leaf color analysis using digital imaging software

Treesearch

Paula F. Murakami; Michelle R. Turner; Abby K. van den Berg; Paul G. Schaberg

2005-01-01

Digital color analysis has become an increasingly popular and cost-effective method utilized by resource managers and scientists for evaluating foliar nutrition and health in response to environmental stresses. We developed and tested a new method of digital image analysis that uses Scion Image or NIH image public domain software to quantify leaf color. This...

Short Serious Games Creation under the Paradigm of Software Process and Competencies as Software Requirements. Case Study: Elementary Math Competencies

ERIC Educational Resources Information Center

Barajas-Saavedra, Arturo; Álvarez-Rodriguez, Francisco J.; Mendoza-González, Ricardo; Oviedo-De-Luna, Ana C.

2015-01-01

Development of digital resources is difficult due to their particular complexity relying on pedagogical aspects. Another aspect is the lack of well-defined development processes, experiences documented, and standard methodologies to guide and organize game development. Added to this, there is no documented technique to ensure correct…

User Guide for the Plotting Software for the Los Alamos National Laboratory Nuclear Weapons Analysis Tools Version 2.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cleland, Timothy James

The Los Alamos National Laboratory Plotting Software for the Nuclear Weapons Analysis Tools is a Java™ application based upon the open source library JFreeChart. The software provides a capability for plotting data on graphs with a rich variety of display options while allowing the viewer interaction via graph manipulation and scaling to best view the data. The graph types include XY plots, Date XY plots, Bar plots and Histogram plots.

A Practical Guide to Calibration of a GSSHA Hydrologic Model Using ERDC Automated Model Calibration Software - Effective and Efficient Stochastic Global Optimization

DTIC Science & Technology

2012-02-01

parameter estimation method, but rather to carefully describe how to use the ERDC software implementation of MLSL that accommodates the PEST model...model independent LM method based parameter estimation software PEST (Doherty, 2004, 2007a, 2007b), which quantifies model to measure- ment misfit...et al. (2011) focused on one drawback associated with LM-based model independent parameter estimation as implemented in PEST ; viz., that it requires

The Research of Software Engineering Curriculum Reform

NASA Astrophysics Data System (ADS)

Kuang, Li-Qun; Han, Xie

With the problem that software engineering training can't meet the needs of the community, this paper analysis some outstanding reasons in software engineering curriculum teaching, such as old teaching contents, weak in practice and low quality of teachers etc. We propose the methods of teaching reform as guided by market demand, update the teaching content, optimize the teaching methods, reform the teaching practice, strengthen the teacher-student exchange and promote teachers and students together. We carried out the reform and explore positive and achieved the desired results.

Radiometer Calibration and Characterization (RCC) User's Manual: Windows Version 4.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andreas, Afshin M.; Wilcox, Stephen M.

2016-02-29

The Radiometer Calibration and Characterization (RCC) software is a data acquisition and data archival system for performing Broadband Outdoor Radiometer Calibrations (BORCAL). RCC provides a unique method of calibrating broadband atmospheric longwave and solar shortwave radiometers using techniques that reduce measurement uncertainty and better characterize a radiometer's response profile. The RCC software automatically monitors and controls many of the components that contribute to uncertainty in an instrument's responsivity. This is a user's manual and guide to the RCC software.

Lung Diseases

MedlinePlus

... Myositis Assessment & Clinical Studies Group (IMACS) Library & Information Services Nanotechnology Notable Papers and Advances Protocols Seminars, Conferences, & Symposia Software Visual Guides What We Study What We Study ...

The Role of the Occupational and Physical Therapist in Assistive Technology. Tech Use Guide: Using Computer Technology.

ERIC Educational Resources Information Center

Reed, Penny; Bowser, Gayl

This guide defines assistive technology as specialized hardware and software equipment used by students with disabilities to increase their ability to participate in tasks of learning and daily living and function as independently as possible. Types of assistive technology are listed, and information resources about assistive technology are noted.…

Evaluator's Guide for Microcomputer-Based Instructional Packages. Developed by MicroSIFT, a Project of the Computer Technology Program. Sixth Revision.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This guide developed by MicroSIFT, a clearinghouse for microcomputer-based educational software and courseware, provides background information and forms to aid teachers and other educators in evaluating available microcomputer courseware. The evaluation process comprises six stages: (1) sifting, which screens out those programs that are not…

Using the K-25 C TD Common File System: A guide to CFSI (CFS Interface)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-12-01

A CFS (Common File System) is a large, centralized file management and storage facility based on software developed at Los Alamos National Laboratory. This manual is a guide to use of the CFS available to users of the Cray UNICOS system at Martin Marietta Energy Systems, Inc., in Oak Ridge, Tennessee.

Using ClassDojo to Help with Classroom Management during Guided Reading

ERIC Educational Resources Information Center

Chiarelli, MaryAnne; Szabo, Susan; Williams, Susan

2015-01-01

This study examined the use of a free behavioral management software program to see if it was successful to help first grade students recognize and self-monitor their behaviors while working in centers during teacher directed guided reading time. The study found that ClassDojo had a positive impact on these first grade students' behaviors and…