Veneer-log production and receipts in the Southeast, 1988

Treesearch

Cecil C. Hutchins

1990-01-01

In 1988, almost 1.4 billion board feet of veneer logs were harvested in the Southeast, and the region's veneer mills processed approximately 1.5 billion board feet of logs. Almost 78 percent of veneer-log production and 76 percent of veneer-log receipts were softwood. There were 79 veneer mills operating in 1988. Softwood plywood was the major product. Almost all...

Innovative approaches for converting a wood hydrolysate to high-quality barrier coatings.

PubMed

Ryberg, Yingzhi Zhu; Edlund, Ulrica; Albertsson, Ann-Christine

2013-08-28

An advanced approach for the efficient and controllable production of softwood hydrolysate-based coatings with excellent oxygen-barrier performance is presented. An innovative conversion of the spray-drying technique into a coating applicator process allowed for a fast and efficient coating process requiring solely aqueous solutions of softwood hydrolysate, even without additives. Compared to analogous coatings prepared by manual application, the spray-drying produced coatings were more homogeneous and smooth, and they adhered more strongly to the substrate. The addition of glyoxal to the aqueous softwood hydrolysate solutions prior to coating formation allowed for hemicellulose cross-linking, which improved both the mechanical integrity and the oxygen-barrier performance of the coatings. A real-time scanning electron microscopy imaging assessment of the tensile deformation of the coatings allowed for a deeper understanding of the ability of the coating layer itself to withstand stress as well as the coating-to-substrate adhesion.

Forcing the Tissue

Treesearch

John E. Preece; J. W. Van Sambeek; Paul H. Henry; James Zaczek

2002-01-01

Many woody shrubs and trees are propagated by rooting green, leafy cuttings (softwood or semihardwood) because of poor rooting response from dormant hardwood cuttings. However, this method limits cutting propagation to a short period each year. As a group of scientists, we've developed a system that allows for production of softwood cuttings during the dormant...

The status of precommercial-sized softwoods in Louisiana, 1991

Treesearch

James F. Rosson

1994-01-01

Data on precommercial-sized softwoods in seedling- and sapling-sized stands are presented and discussed. Inadequate levels of softwood stocking on NIPF lands could diminish long-term supplies of softwood in the State.

Recent changes in the size of southern forest enterprises: A survivor analysis

Treesearch

James E. Granskog

1989-01-01

Over the decade from 1976 to 1986, the trend among southern enterprises that process softwood timer has been to build larger operations to reduce unit cots. Minimum efficient plant size, as determined by survivor analysis, has increased from 1,000 to 1,500 tons per day from pulpmills, 100 to 250 million square feeet per year for softwood plywood plants, and 20 to 50...

Geometric model for softwood transverse thermal conductivity. Part I

Treesearch

Hong-mei Gu; Audrey Zink-Sharp

2005-01-01

Thermal conductivity is a very important parameter in determining heat transfer rate and is required for developing of drying models and in industrial operations such as adhesive cure rate. Geometric models for predicting softwood thermal conductivity in the radial and tangential directions were generated in this study based on obervation and measurements of wood...

U.S. Forest Products Annual Market Review and Prospects, 2011-2015

Treesearch

James L. Howard; David B. McKeever

2015-01-01

This paper describes the current state of the United States economy and provides general and statistical information on forest products markets in terms of production, trade, consumption, and prices. Market developments are described for sawn softwood, sawn hardwood, softwood log trade, wood-based panels, paper and paperboard, fuelwood, forest product prices, and...

Assessing pine regeneration for the South Central United States

Treesearch

William H. McWilliams

1990-01-01

Poor regeneration of pine following harvest on nonindustrial timberland has been identified as a major cause for loss of pine forests and slowdown of softwood growth in the Southern United States.Developing a strategy for regeneration assessment requires clear definition of sampling objectives, sampling design, and analytical processes. It is important that...

75 FR 61001 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-01

... Research, Promotion, Consumer Education and Industry Information Order; Proposed Rules #0;#0;Federal...-AD03 Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order AGENCY... Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order (Order). Softwood...

Sawmill profile : new Forest Products Lab report defines the makeup of North America's softwood sawmill industry

Treesearch

Henry Spelter; Matthew Alderman

2005-01-01

As of July 2005, the main stream of the softwood lumber industry in the U.S. and Canada consisted of about 1,067sawmills. These sawmills had a combined capacity of 189 million m3 (80 billion BF), employed about 99,000, produced about 172 million m3 (nominal, 73 billion BF) of lumber, and in the process consumed about 280 million m3 of wood.

19 CFR 12.142 - Entry of softwood lumber and softwood lumber products from any country into the United States.

Code of Federal Regulations, 2010 CFR

2010-04-01

....C. 1202 et seq.) that is entered or withdrawn from warehouse for consumption, in the customs... estimated export charge data. (ii) Each importer of softwood lumber and softwood lumber products for which a...

19 CFR 12.142 - Entry of softwood lumber and softwood lumber products from any country into the United States.

Code of Federal Regulations, 2011 CFR

2011-04-01

....C. 1202 et seq.) that is entered or withdrawn from warehouse for consumption, in the customs... estimated export charge data. (ii) Each importer of softwood lumber and softwood lumber products for which a...

On-site energy consumption at softwood sawmills in Montana

Treesearch

Dan Loeffler; Nathaniel Anderson; Todd A. Morgan; Colin B. Sorenson

2016-01-01

Total on-site energy requirements for wood product manufacturing are generally not well understood or publicly available, particularly at subregional scales, such as the state level. This article uses a mail survey of softwood sawmills in Montana to develop a profile of all on-site energy consumption. Energy use is delineated by fuel type on a production basis...

U.S. forest products annual market review and prospects, 2002–2006

Treesearch

James L. Howard

2006-01-01

This report provides general and statistical information on forests products markets in terms of production, trade, consumption, and prices. The current state of the U.S. economy is described. Market developments are described for sawn softwood, sawn hardwood, softwood log trade, wood- based panels, paper and paperboard, fuelwood, and forest product prices. Policy...

U S Forest Products Annual Market Review and Prospects, 2008–2012

Treesearch

James L. Howard; David B. McKeever

2012-01-01

This paper describes the current state of the U.S. economy and provides general and statistical information on forest products markets in terms of production, trade, consumption, and prices. Market developments are described for sawn softwood, sawn hardwood, softwood log trade, wood-based panels, paper and paperboard, fuelwood, forest product prices, and housing starts...

U.S forest products annual market review and prospects, 2012-2016

Treesearch

James L. Howard; David B. McKeever

2016-01-01

This report describes the current state and near-term perspective of the U.S. economy supported by general and statistical information on forest products markets in terms of production, trade, consumption, and prices. Market developments are described for sawn softwood, sawn hardwood, softwood log trade, wood-base panels, paper and paperboard, fuelwood, forest products...

U.S. forest products annual market review and prospects, 2006-2010.

Treesearch

James L. Howard; David B. McKeever

2010-01-01

This paper describes the current state of the U.S. economy and provides general and statistical information on forest products markets in terms of production, trade, consumption, and prices. Market developments are described for sawn softwood, sawn hardwood, softwood log trade, wood-based panels, paper and paperboard, fuelwood, forest product prices, and housing starts...

U.S. Forest Products Annual Market Review and Prospects 2010-2014

Treesearch

James L. Howard; David B. McKeever

2014-01-01

This paper describes the current state of the U.S. economy and provides general and statistical information on forest products markets in terms of production, trade, consumption, and prices. Market developments are described for sawn softwood, sawn hardwood, softwood log trade, wood-based panels, paper and paperboard, fuelwood, forest product prices, and housing starts...

U.S. forest products annual market review and prospects, 2013–2017

Treesearch

James L. Howard; David B. McKeever; Shaobo Liang

2017-01-01

This report describes the current state and near-term prospective of the U.S. economy supported by general and statistical information on forest products markets in terms of production, trade, consumption and prices. Market developments are described for sawn softwood, sawn hardwood, softwood log trade, wood-based panels, paper and paperboard, fuelwood, forest product...

U.S. forest products annual market review and prospects, 2001–2005.

Treesearch

James L. Howard

2005-01-01

This report provides general and statistical information on forest products markets in terms of production, trade, consumption, and prices. The current state of the United States economy is described. Market developments are described for sawn softwood, sawn hardwood, softwood log trade, wood-based panels, paper and paperboard, fuelwood, and forest products prices....

U.S. forest products annual market review and prospects, 2004–2008

Treesearch

James L. Howard; Rebecca Westby

2007-01-01

This report provides general and statistical information on forest products markets in terms of production, trade, consumption, and prices. The current state of the U.S. economy is described. Market developments are described for sawn softwood, sawn hardwood, softwood log trade, wood-based panels, paper and paperboard, fuelwood, and forest product prices. Policy...

U.S. forest products annual market review and prospects, 2007-2011.

Treesearch

David B. McKeever; James L. Howard

2011-01-01

This paper describes the current state of the U.S. economy and provides general and statistical information on forest products markets in terms of production, trade, consumption, and prices. Market developments are described for sawn softwood, sawn hardwood, softwood log trade, wood-based panels, paper and paperboard, fuelwood, forest product prices, and housing starts...

U.S. Forest products annual market review and prospects, 1999–2002

Treesearch

James L. Howard

2001-01-01

This report provides general and statistical information on forests products markets in terms of production, trade, consumption, and prices. The current state of the United States economy is described. Market developments are described for sawn softwood, sawn hardwood, softwood log trade, wood-based panels, paper and paperboard, fuelwood, and forest product prices....

U.S. Forest products annual market review and prospects, 2000-2003

Treesearch

James L. Howard

2002-01-01

This report provides general and statistical information on forests products markets in terms of production, trade, con-sumption, and prices. The current state of the United States economy is described. Market developments are described for sawn softwood, sawn hardwood, softwood log trade, wood-based panels, paper and paperboard, fuelwood, and forest product prices....

Effect of Residual Lignin Type and Amount on Bleaching of Kraft Pulp by Trametes versicolor

PubMed Central

Reid, Ian D.; Paice, Michael G.

1994-01-01

The white rot fungus Trametes (Coriolus) versicolor can delignify and brighten unbleached hardwood kraft pulp within a few days, but softwood kraft pulps require longer treatment. To determine the contributions of higher residual lignin contents (kappa numbers) and structural differences in lignins to the recalcitrance of softwood kraft pulps to biobleaching, we tested softwood and hardwood pulps cooked to the same kappa numbers, 26 and 12. A low-lignin-content (overcooked) softwood pulp resisted delignification by T. versicolor, but a high-lignin-content (lightly cooked) hardwood pulp was delignified at the same rate as a normal softwood pulp. Thus, the longer time taken by T. versicolor to brighten softwood kraft pulp than hardwood pulp results from the higher residual lignin content of the softwood pulp; possible differences in the structures of the residual lignins are important only when the lignin becomes highly condensed. Under the conditions used in this study, when an improved fungal inoculum was used, six different softwood pulps were all substantially brightened by T. versicolor. Softwood pulps whose lignin contents were decreased by extended modified continuous cooking or oxygen delignification to kappa numbers as low as 15 were delignified by T. versicolor at the same rate as normal softwood pulp. More intensive O2 delignification, like overcooking, decreased the susceptibility of the residual lignin in the pulps to degradation by T. versicolor. PMID:16349246

75 FR 68328 - Subsidy Programs Provided by Countries Exporting Softwood Lumber and Softwood Lumber Products to...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-05

..., provided by certain countries exporting softwood lumber or softwood lumber products to the United States... lumber products to the United States, we are soliciting public comment only on subsidies provided by... DEPARTMENT OF COMMERCE International Trade Administration Subsidy Programs Provided by Countries...

Profile 2005 : softwood sawmills in the United States and Canada

Treesearch

Henry Spelter; Matthew Alderman

2005-01-01

The softwood lumber industry in the United States and Canada consists of about 1,067 sawmills. In 2005 these sawmills had a combined capacity of 189 million m3 (80 × 109 bf). In 2004, they employed about 99,000 people and produced 172 million m3 (nominal) (73.0 × 109 bf) of lumber. In the process, they consumed about 280 million m3 (9.9 × 109 ft3) of timber. Employee...

Profile 2007: Softwood sawmills in the United States and Canada

Treesearch

Henry Spelter; David McKeever; Matthew Alderman

2007-01-01

The number of larger, permanent softwood lumber mills in the United States and Canada has shrunk from 1,311 in 1995 to 990 as of June 2007. These mills had a combined capacity of 190.2 million m3 (80.6 × 109 board feet), slightly down from the 2005 value. In 2006, they produced 171 million (nominal) m3 (72.3 × 109 board feet) of lumber, and in the process, generated...

On-site energy consumption and selected emissions at softwood sawmills in the southwestern United States

Treesearch

Dan Loeffler; Nathaniel Anderson; Todd A. Morgan; Colin B. Sorenson

2016-01-01

Presently there is a lack of information describing US southwestern energy consumption and emissions generated from the sawmilling industry. This article uses a mail survey of softwood sawmills in the states of Arizona, Colorado, and New Mexico to develop a profile of on-site energy consumption and selected emissions for the industry. Energy consumption is...

Maximum size-density relationships for mixed softwoods in the northeastern USA

Treesearch

Dale S. Solomon; Lianjun Zhang

2002-01-01

The maximum size-density relationships or self-thinning lines were developed for three mix .ed-softwood climax forest habitats (hemlock-red spruce, spruce-fir, and cedar-black spruce) in the northeastern USA. The plot data were collected from an extensive data base used in growth studies from 1950 to 1970, and represented a wide range of species compositions, sites,...

[Influence of the cycle number in processing of cellulose from waste paper on its ability to hydrolysis by cellulases].

PubMed

Morozova, V V; Semenova, M V; Rozhkova, A M; Kondrat'eva, E G; Okunev, O N; Bekkarevich, A O; Novozhilov, E V; Sinitsin, A P

2010-01-01

Hydrolytic ability of laboratory enzyme preparations from fungus of the Penicillium genus was investigated using kraft pulp from nonbleached softwood and bleached hardwood cellulose as substrates. The enzyme preparations were shown to efficiently hydrolyze both softwood and hardwood cellulose. The yields of glucose and reducing sugars were 24-36 g/l and 27-37 g/l from 100 g/l of dry substrate in 48 h, respectively, and depended on the number of substrate grinding cycles.

Revealing the fate of the phenylcoumaran linkage during lignin oxidation reactions.

PubMed

Lahive, Ciaran W; Lancefield, Christopher S; Codina, Anna; Kamer, Paul C J; Westwood, Nicholas J

2018-03-14

The fate of most lignin linkages, other than the β-O-4, under selective oxidation conditions is largely unknown. In this work we use advanced β-5 lignin model compounds to identify the fate of phenylcoumaran units in a softwood lignin during oxidation with DDQ. By using model compounds combined with detailed characterisation of the oxidised lignin polymer using HSQC and HMBC NMR we show that phenylcoumarones are a major product, and therefore constitute a novel non-native β-5 linkage in oxidised lignins. Additionally, the reactivity of these units in lignin led us to further investigate their connectivity in lignin, showing that they are found as both phenolic and etherified units. The findings and approach developed here will help improve the efficiency of selective oxidative lignin depolymerisation processes, particularly those aimed at the upgrading of softwood lignin in which phenylcoumarans are a major linkage.

FIRST STATUS REPORT: TESTING OF AGED SOFTWOOD FIBERBOARD MATERIAL FOR THE 9975 SHIPPING PACKAGE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daugherty, W.

2010-01-08

Samples have been prepared from a softwood fiberboard lower subassembly. Physical, mechanical and thermal properties have been measured following varying periods of conditioning in each of several environments. These tests have been conducted in the same manner as previous testing on cane fiberboard samples. Overall, similar aging trends are observed for softwood and cane fiberboard samples. Some of the observed differences result from the limited exposure periods of the softwood fiberboard samples, and the impact of seasonal humidity levels. Testing following additional conditioning will continue and should eliminate this bias. Post-conditioning data have been measured on a single softwood fiberboardmore » assembly, and baseline data are also available from a limited number of vendor-provided samples. This provides minimal information on the possible sample-to-sample variation exhibited by softwood fiberboard. Data to date are generally consistent with the range seen in cane fiberboard, but much of the compression strength data tends toward the lower end of that range. Further understanding of the variability of softwood fiberboard properties will require testing of additional material. Cane fiberboard wall sheathing is specified for thermal insulation and impact resistance in 9975 shipping packages. Softwood fiberboard manufactured by Knight-Celotex was approved as an acceptable substitute for transportation in 2008. Data in the literature [1] show a consistent trend in thermal properties of fiberboard as a function of temperature, density and/or moisture content regardless of material source. Thermal and mechanical properties were measured for un-aged softwood fiberboard samples, and found to be sufficiently similar to those of un-aged cane fiberboard to support the acceptance of 9975 packages with softwood fiberboard overpack into KAMS for storage. The continued acceptability of aged softwood fiberboard to meet KAMS storage requirements was the subject of subsequent activities. This is an interim status report for experiments carried out per Task Technical Plan WSRC-TR-2008-00024 [2], which is part of the comprehensive 9975 package surveillance program [3]. The primary goal of this task is to validate the preliminary assessment that Knight-Celotex softwood fiberboard is an acceptable substitute for cane fiberboard in the 9975 shipping package overpack, and that the long-term performance of these two materials in a storage environment is comparable.« less

76 FR 22757 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

...-10-0015; PR-A2] RIN 0581-AD03 Softwood Lumber Research, Promotion, Consumer Education and Industry.... SUMMARY: This rule proposes a Softwood Lumber Research, Promotion, Consumer Education and Industry... proposed Order may be obtained from the Referendum Agent, Research and Promotion Branch, Fruit and...

76 FR 53816 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-30

...-10-0015C; FR] RIN 0581-AD03 Softwood Lumber Research, Promotion, Consumer Education and Industry.... Pello, Marketing Specialist, Research and Promotion Division, Fruit and Vegetable Programs, AMS, USDA, P... Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order (Order). The purpose...

Northern Exports of softwood products, 1980-85

Treesearch

James E. Granskog

1988-01-01

Assessment of export opportunities for softwood products from the North has been hampered by a lack of information describing foreign sales from the region. This article describes the value and volume of softwood products exported from the northern United States for 1980 through 1985. Roundwood productsmostly spruce logs from Maine and Vermont- are the largest northern...

Virginia's Forests

Treesearch

William A. Bechtold; Mark J. Brown; John B. Tansey

1987-01-01

Between 1977 and 1986, area of timberland in Virginia declined from 16.0 to 15.4 million acres. Volume of softwood growing stock increased by 5 percent, and volume of hardwood growing stock increased by 11 percent. Softwood net annual growth decreased by 7 percent, and hardwood growing-stick growth decreased by 1 percent. Softwood removals remained almost unchanged...

Production, consumption, and prices of softwood products in North America: regional time series data, 1950 to 1985.

Treesearch

Darius M. Adams; Kristine C. Jackson; Richard W. Haynes

1988-01-01

This report provides 35 years of information on softwood timber production and consumption in the United States and Canada. Included are regional time series on production and prices of softwood lumber, plywood, residues, and pulpwood; timber harvest volumes and values; production costs; and recovery factors.

A preview of Delaware's timber resource

Treesearch

Joseph E. Barnard; Teresa M. Bowers

1973-01-01

The recently completed forest survey of Delaware indicated little change in the total forest area since the 1957 estimate. Softwood volume and the acreage of softwood types decreased considerably. Hardwoods now comprise two-thirds of the volume and three-fourths of the forest area. Total average annual growth exceeded removals, but softwood removals exceeded average...

Softwood lumber products in the United States: substitutes, complements, or unrelated?

Treesearch

Rao V. Nagubadi; Daowei Zhang; Jeffrey P. Prestemon; David N. Wear

2004-01-01

This study addresses an important dimension concerning the softwood lumber trade dispute between United States and Canada-substitutability among imported and domestically produced species. We employ the restricted translog subcost function approach to study this issue based on the monthly data of US softwood products consumption and prices between Jan. 1989 and July...

Riding the crest of the wave : sawn softwood markets in 2003-2004

Treesearch

Henry Spelter; Robert Kozak; Nikolai Burdin

2004-01-01

Globalization of the sawn softwood sector continues as we ride the crest of the wave, characterized by generally positive markets worldwide. In North America, market conditions for sawn softwood are booming, fuelled by a robust housing sector; however, the ongoing trade dispute between the United States and Canada is dampening this generally positive outlook. The...

Syringyl lignin production in conifers: Proof of concept in a Pine tracheary element system

DOE PAGES

Wagner, Armin; Tobimatsu, Yuki; Phillips, Lorelle; ...

2015-04-20

Conifers (softwoods) naturally lack syringyl units in their lignins, rendering lignocellulosic materials from such species more difficult to process than syringyl-rich hardwood species. Using a transformable Pinus radiata tracheary element (TE) system as an experimental platform, we investigated whether metabolic engineering can be used to create syringyl lignin in conifers. Pyrolysis-GC/MS and 2D-NMR analysis of P. radiata TE cultures transformed to express ferulate 5-hydroxylase (F5H) and caffeic acid O-methyltransferase (COMT) from Liquidambar styraciflua confirmed the production and incorporation of sinapyl alcohol into the lignin polymer. Transformation with F5H was sufficient for the production of syringyl lignin in TEs, but cotransformationmore » with COMT improved its formation. In addition, lower levels of the pathway intermediate 5-hydroxyconiferyl alcohol were evidenced in cotransformation experiments, indicating that the introduction of the COMT overcame the inefficiency of the native pine methyltransferases for supporting sinapyl alcohol production. In conclusion, our results provide the proof of concept that it is possible to generate a lignin polymer that contains syringyl units in softwood species such as P. radiata, suggesting that it might be possible to retain the outstanding fiber properties of softwoods while imbuing them with the lignin characteristics of hardwoods that are more favorable for industrial processing.« less

Syringyl lignin production in conifers: Proof of concept in a Pine tracheary element system.

PubMed

Wagner, Armin; Tobimatsu, Yuki; Phillips, Lorelle; Flint, Heather; Geddes, Barbara; Lu, Fachuang; Ralph, John

2015-05-12

Conifers (softwoods) naturally lack syringyl units in their lignins, rendering lignocellulosic materials from such species more difficult to process than syringyl-rich hardwood species. Using a transformable Pinus radiata tracheary element (TE) system as an experimental platform, we investigated whether metabolic engineering can be used to create syringyl lignin in conifers. Pyrolysis-GC/MS and 2D-NMR analysis of P. radiata TE cultures transformed to express ferulate 5-hydroxylase (F5H) and caffeic acid O-methyltransferase (COMT) from Liquidambar styraciflua confirmed the production and incorporation of sinapyl alcohol into the lignin polymer. Transformation with F5H was sufficient for the production of syringyl lignin in TEs, but cotransformation with COMT improved its formation. In addition, lower levels of the pathway intermediate 5-hydroxyconiferyl alcohol were evidenced in cotransformation experiments, indicating that the introduction of the COMT overcame the inefficiency of the native pine methyltransferases for supporting sinapyl alcohol production.Our results provide the proof of concept that it is possible to generate a lignin polymer that contains syringyl units in softwood species such as P. radiata, suggesting that it might be possible to retain the outstanding fiber properties of softwoods while imbuing them with the lignin characteristics of hardwoods that are more favorable for industrial processing.

Syringyl lignin production in conifers: Proof of concept in a Pine tracheary element system

PubMed Central

Wagner, Armin; Tobimatsu, Yuki; Phillips, Lorelle; Flint, Heather; Geddes, Barbara; Lu, Fachuang; Ralph, John

2015-01-01

Conifers (softwoods) naturally lack syringyl units in their lignins, rendering lignocellulosic materials from such species more difficult to process than syringyl-rich hardwood species. Using a transformable Pinus radiata tracheary element (TE) system as an experimental platform, we investigated whether metabolic engineering can be used to create syringyl lignin in conifers. Pyrolysis-GC/MS and 2D-NMR analysis of P. radiata TE cultures transformed to express ferulate 5-hydroxylase (F5H) and caffeic acid O-methyltransferase (COMT) from Liquidambar styraciflua confirmed the production and incorporation of sinapyl alcohol into the lignin polymer. Transformation with F5H was sufficient for the production of syringyl lignin in TEs, but cotransformation with COMT improved its formation. In addition, lower levels of the pathway intermediate 5-hydroxyconiferyl alcohol were evidenced in cotransformation experiments, indicating that the introduction of the COMT overcame the inefficiency of the native pine methyltransferases for supporting sinapyl alcohol production.Our results provide the proof of concept that it is possible to generate a lignin polymer that contains syringyl units in softwood species such as P. radiata, suggesting that it might be possible to retain the outstanding fiber properties of softwoods while imbuing them with the lignin characteristics of hardwoods that are more favorable for industrial processing. PMID:25902506

The impact of the export and import of raw logs on domestic timber supplies and prices.

Treesearch

David R. Darr; Richard W. Haynes; Darius M. Adams

1980-01-01

Reviews U.S. foreign and domestic markets for softwood construction materials, giving special consideration to trade patterns among Japan, Canada, and the United States. For alternative assumptions about market responses to a ban of U.S. softwood log exports, displays impacts on selected measures of U.S. softwood stumpage, lumber, and plywood markets.

Is hardwood nursery stock available?

Treesearch

Herschel G. Abbott; Frank E. Cunningham

1957-01-01

The amount of hardwood planting stock used in forest tree plantations in the United States is very small indeed. The great bulk of planting stock used is softwood. Wallihan (4) points out that there are several good reasons for this. First of all is the greater demand for softwood forest products. Another is the fact, often demonstrated in the past, that softwoods are...

Possible Demands for Eastern Hardwoods Resulting from Harvest Restrictions in the Pacific

Treesearch

Janice K. Wiedenbeck; Philip A. Araman

1993-01-01

Efforts to conserve the habitat of the northern spotted owl in the Pacific Northwest have placed softwood timber supplies under a great deal of pressure and driven up the price of softwood lumber. Hardwoods could meet some of the demand for products that have previously been manufactured from softwood species. Hardwood structural lumber may soon become an economically...

Can eastern hardwoods offset timber cutbacks?

Treesearch

Janice K. Wiedenbeck; Philip A. Araman

1994-01-01

Efforts to conserve habitat of the northern spotted owl in the Pacific Northwest have placed softwood timber supplies under a great deal of pressure and driven up the price of softwood lumber. Hardwoods could meet some of the demand for products that previously have been made from softwood species. Research in this field has been under way for some time; more is needed...

Fast microwave-assisted acidolysis: a new biorefinery approach for the zero-waste utilisation of lignocellulosic biomass to produce high quality lignin and fermentable saccharides.

PubMed

Zhou, Long; Santomauro, Fabio; Fan, Jiajun; Macquarrie, Duncan; Clark, James; Chuck, Christopher J; Budarin, Vitaliy

2017-09-21

Generally, biorefineries convert lignocellulosic biomass into a range of biofuels and further value added chemicals. However, conventional biorefinery processes focus mainly on the cellulose and hemicellulose fractions and therefore produce only low quality lignin, which is commonly burnt to provide process heat. To make full use of the biomass, more attention needs to be focused on novel separation techniques, where high quality lignin can be isolated that is suitable for further valorisation into aromatic chemicals and fuel components. In this paper, three types of lignocellulosic biomass (softwood, hardwood and herbaceous biomass) were processed by microwave-assisted acidolysis to produce high quality lignin. The lignin from the softwood was isolated largely intact in the solid residue after acidolysis. For example, a 10 min microwave-assisted acidolysis treatment produced lignin with a purity of 93% and in a yield of 82%, which is superior to other conventional separation methods reported. Furthermore, py-GC/MS analysis proved that the isolated lignin retained the original structure of native lignin in the feedstock without severe chemical modification. This is a large advantage, and the purified lignin is suitable for further chemical processing. To assess the suitability of this methodology as part of a biorefinery system, the aqueous phase, produced after acidolysis of the softwood, was characterised and assessed for its suitability for fermentation. The broth contained some mono- and di-saccharides but mainly contained organic acids, oligosaccharides and furans. While this is unsuitable for S. cerevisiae and other common ethanol producing yeasts, two oleaginous yeasts with known inhibitor tolerances were selected: Cryptococcus curvatus and Metschnikowia pulcherrima. Both yeasts could grow on the broth, and demonstrated suitable catabolism of the oligosaccharides and inhibitors over 7 days. In addition, both yeasts were shown to be able to produce an oil with a similar composition to that of palm oil. This preliminary work demonstrates new protocols of microwave-assisted acidolysis and therefore offers an effective approach to produce high purity lignin and fermentable chemicals, which is a key step towards developing a zero-waste lignocellulosic biorefinery.

In situ lignocellulosic unlocking mechanism for carbohydrate hydrolysis in termites: crucial lignin modification

PubMed Central

2011-01-01

Background Termites are highly effective at degrading lignocelluloses, and thus can be used as a model for studying plant cell-wall degradation in biological systems. However, the process of lignin deconstruction and/or degradation in termites is still not well understood. Methods We investigated the associated structural modification caused by termites in the lignin biomolecular assembly in softwood tissues crucial for cell-wall degradation. We conducted comparative studies on the termite-digested (i.e. termite feces) and native (control) softwood tissues with the aid of advanced analytical techniques: 13C crosspolarization magic angle spinning and nuclear magnetic resonance (CP-MAS-NMR) spectroscopy, flash pyrolysis with gas chromatography mass spectrometry (Py-GC/MS), and Py-GC-MS in the presence of tetramethylammonium hydroxide (Py-TMAH)-GC/MS. Results The 13C CP/MAS NMR spectroscopic analysis revealed an increased level of guaiacyl-derived (G unit) polymeric framework in the termite-digested softwood (feces), while providing specific evidence of cellulose degradation. The Py-GC/MS data were in agreement with the 13C CP/MAS NMR spectroscopic studies, thus indicating dehydroxylation and modification of selective intermonomer side-chain linkages in the lignin in the termite feces. Moreover, Py-TMAH-GC/MS analysis showed significant differences in the product distribution between control and termite feces. This strongly suggests that the structural modification in lignin could be associated with the formation of additional condensed interunit linkages. Conclusion Collectively, these data further establish: 1) that the major β-O-4' (β-aryl ether) was conserved, albeit with substructure degeneracy, and 2) that the nature of the resulting polymer in termite feces retained most of its original aromatic moieties (G unit-derived). Overall, these results provide insight into lignin-unlocking mechanisms for understanding plant cell-wall deconstruction, which could be useful in development of new enzymatic pretreatment processes mimicking the termite system for biochemical conversion of lignocellulosic biomass to fuels and chemicals. PMID:21672247

Northern Hemisphere Biome-and Process-Specific Changes in Forest Area and Gross Merchantable Volume: 1890-1990 (DB1017)

DOE Data Explorer

Auclair, A.N.D. [Science and Policy Associates, Inc., Washington, D.C. (United States; Bedford, J.A. [Science and Policy Associates, Inc., Washington, D.C. (United States); Revenga, C. [Science and Policy Associates, Inc., Washington, D.C. (United States); Brenkert, A.L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

1997-01-01

This database lists annual changes in areal extent (Ha) and gross merchantable wood volume (m3) produced by depletion and accrual processes in boreal and temperate forests in Alaska, Canada, Europe, Former Soviet Union, Non-Soviet temperate Asia, and the contiguous United States for the years 1890 through 1990. Forest depletions (source terms for atmospheric CO2) are identified as forest pests, forest dieback, forest fires, forest harvest, and land-use changes (predominantly the conversion of forest, temperate woodland, and shrubland to cropland). Forest accruals (sink terms for atmospheric CO2) are identified as fire exclusion, fire suppression, and afforestation or crop abandonment. The changes in areal extent and gross merchantable wood volume are calculated separately for each of the following biomes: forest tundra, boreal softwoods, mixed hardwoods, temperate softwoods, temperate hardwoods, and temperate wood- and shrublands.

Revealing the molecular structural transformation of hardwood and softwood in dilute acid flowthrough pretreatment

DOE PAGES

Zhang, Libing; Pu, Yunqiao; Univ. of Tennessee, Knoxville, TN; ...

2016-10-03

To understand better the intrinsic recalcitrance of lignocellulosic biomass, the main hurdle to its efficient deconstruction, the effects of dilute acid flowthrough pretreatment on the dissolution chemistry of hemicellulose, cellulose, and lignin for both hardwood (e.g., poplar wood) and softwood (e.g., lodgepole pine wood) were investigated at temperatures of 200 to 270 °C and a flow rate of 25 mL/min with 0.05% (w/w) H 2SO 4. Results suggested that the softwood cellulose was more readily degraded into monomeric sugars than that of hardwood under same pretreatment conditions. However, while the hardwood lignin was completely removed into hydrolysate, ~30% of themore » softwood lignin remained as solid residues under identical conditions, which was plausibly caused by vigorous C5-active recondensation reactions (C–C5). As a result, effects of molecular structural features (i.e., lignin molecular weight, cellulose crystallinity, and condensed lignin structures) on the recalcitrance of hardwood and softwood to dilute acid pretreatment were identified for the first time in this study, providing important insights to establish the effective biomass pretreatment.« less

Valorization of Lignin to Simple Phenolic Compounds over Tungsten Carbide: Impact of Lignin Structure.

PubMed

Guo, Haiwei; Zhang, Bo; Qi, Zaojuan; Li, Changzhi; Ji, Jianwei; Dai, Tao; Wang, Aiqin; Zhang, Tao

2017-02-08

Lignins isolated from representative hardwood, softwood, and grass materials were effectively hydrocracked to aromatics catalyzed by tungsten carbide over activated carbon (W 2 C/AC). The effects of botanical species and fractionation methods on lignin structure and the activity of W 2 C/AC were studied in detail. Gas permeation chromatography (GPC), FTIR, elemental analysis, and 2 D HSQC NMR showed that all the extracted samples shared the basic skeleton of lignin, whereas the fractionation method significantly affected the structure. The organosolv process provided lignin with a structure more similar to the native lignin, which was labile to be depolymerized by W 2 C/AC. Softwood lignins (i.e., spruce and pine) possessed higher molecular weights than hardwood lignins (i.e., poplar and basswood); whereas corn stalk lignin that has noncanonical subunits and exhibited the lowest molecular weight owing to its shorter growth period. β-O-4 bonds were the major linkages in all lignin samples, whereas softwood lignins contained more resistant linkages of β-5 and less β-β than corn stalk and hardwood lignins; as a result, lowest hydrocracking efficiency was obtained in softwood lignins, followed by corn stalk and hardwood lignins. 2 D HSQC NMR spectra of lignin and the liquid oil as well as the solid residue showed that W 2 C/AC exhibited high activity not only in β-O-4 cleavage, but also in deconstruction of other ether linkages between aromatic units, so that high yield of liquid oil was obtained from lignin. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Valorisation of softwood bark through extraction of utilizable chemicals. A review.

PubMed

Jablonsky, M; Nosalova, J; Sladkova, A; Haz, A; Kreps, F; Valka, J; Miertus, S; Frecer, V; Ondrejovic, M; Sima, J; Surina, I

2017-11-01

Softwood bark is an important source for producing chemicals and materials as well as bioenergy. Extraction is regarded as a key technology for obtaining chemicals in general, and valorizing bark as a source of such chemicals in particular. In this paper, properties of 237 compounds identified in various studies dealing with extraction of softwood bark were described. Finally, some challenges and perspectives on the production of chemicals from bark are discussed. Copyright © 2017 Elsevier Inc. All rights reserved.

Ten-Ecosystem Study. [Grand and Weld Counties, Colorado; Warren County, Pennsylvania; St. Louis County, Minnesota; Sandoval County, New Mexico; Kershaw County, South Carolina; Fort Yukon, Alaska; Grays Harbor County, Washington; and Washington County, Missouri.

NASA Technical Reports Server (NTRS)

Mazade, A. V. (Principal Investigator)

1981-01-01

Remote sensing methodology developed for the Nationwide Forestry Applications Program utilize computer data processing procedures for performing inventories from satellite imagery. The Ten-Ecosystem Study (TES) was developed to test the processing procedures in an intermediate-sized application study. The results of TES indicate that LANDSAT multispectral imagery and associated automatic data processing techniques can be used to distinguish softwood, hardwood, grassland, and water and make inventory of these classes with an accuracy of 70 percent or better. The technical problems encountered during the TES and the solutions and insights to these problems are discussed. The TES experience is useful in planning subsequent inventories utilizing remote sensing technology.

40 CFR 430.03 - Best management practices (BMPs) for spent pulping liquor, soap, and turpentine management, spill...

Code of Federal Regulations, 2010 CFR

2010-07-01

... triggers investigative or corrective action. Mills determine action levels by a statistical analysis of six... exchanger, recovery furnace or boiler, pipeline, valve, fitting, or other device that contains, processes... gases from the cooking of softwoods by the kraft pulping process. Sometimes referred to as sulfate...

Sulfite pretreatment (SPORL) for robust enzymatic saccharification of spruce and red pine

Treesearch

J.Y. Zhu; X.J. Pan; G.S. Wang; R. Gleisner

2009-01-01

This study established a novel process using sulfite pretreatment to overcome recalcitrance of lignocellulose (SPORL) for robust and efficient bioconversion of softwoods. The process consists of sulfite treatment of wood chips under acidic conditions followed by mechanical size reduction using disk refining. The results indicated that after the SPORL pretreatment of...

Process Design and Economics of On-Site Cellulase Production on Various Carbon Sources in a Softwood-Based Ethanol Plant

PubMed Central

Barta, Zsolt; Kovacs, Krisztina; Reczey, Kati; Zacchi, Guido

2010-01-01

On-site cellulase enzyme fermentation in a softwood-to-ethanol process, based on SO2-catalysed steam pretreatment followed by simultaneous saccharification and fermentation, was investigated from a techno-economic aspect using Aspen Plus© and Aspen Icarus Process Evaluator© softwares. The effect of varying the carbon source of enzyme fermentation, at constant protein and mycelium yields, was monitored through the whole process. Enzyme production step decreased the overall ethanol yield (270 L/dry tonne of raw material in the case of purchased enzymes) by 5–16 L/tonne. Capital cost was found to be the main cost contributor to enzyme fermentation, constituting to 60–78% of the enzyme production cost, which was in the range of 0.42–0.53 SEK/L ethanol. The lowest minimum ethanol selling prices (4.71 and 4.82 SEK/L) were obtained in those scenarios, where pretreated liquid fraction supplemented with molasses was used as carbon source. In some scenarios, on-site enzyme fermentation was found to be a feasible alternative. PMID:21048869

Process design and economics of on-site cellulase production on various carbon sources in a softwood-based ethanol plant.

PubMed

Barta, Zsolt; Kovacs, Krisztina; Reczey, Kati; Zacchi, Guido

2010-06-28

On-site cellulase enzyme fermentation in a softwood-to-ethanol process, based on SO(2)-catalysed steam pretreatment followed by simultaneous saccharification and fermentation, was investigated from a techno-economic aspect using Aspen Plus© and Aspen Icarus Process Evaluator© softwares. The effect of varying the carbon source of enzyme fermentation, at constant protein and mycelium yields, was monitored through the whole process. Enzyme production step decreased the overall ethanol yield (270 L/dry tonne of raw material in the case of purchased enzymes) by 5-16 L/tonne. Capital cost was found to be the main cost contributor to enzyme fermentation, constituting to 60-78% of the enzyme production cost, which was in the range of 0.42-0.53 SEK/L ethanol. The lowest minimum ethanol selling prices (4.71 and 4.82 SEK/L) were obtained in those scenarios, where pretreated liquid fraction supplemented with molasses was used as carbon source. In some scenarios, on-site enzyme fermentation was found to be a feasible alternative.

PLYMAP : a computer simulation model of the rotary peeled softwood plywood manufacturing process

Treesearch

Henry Spelter

1990-01-01

This report documents a simulation model of the plywood manufacturing process. Its purpose is to enable a user to make quick estimates of the economic impact of a particular process change within a mill. The program was designed to simulate the processing of plywood within a relatively simplified mill design. Within that limitation, however, it allows a wide range of...

Life cycle environmental performance of renewable building materials in the context of residential construction : phase II research report: an extension to the 2005 phase I research report. Module D, Life cycle inventory of softwood lumber manufacturing in the Northeastern and North Central United States.

Treesearch

Richard D. Bergman; Scott A. Bowe

2009-01-01

The goal of this study was to gain an understanding of the environmental impact for softwood lumber production through a gate-to-gate life-cycle inventory (LCI) of softwood sawmills in the northeastern and north central United States (NE/NC). Primary mill data were collected per Consortium on Research for Renewable Industrial Material (CORRIM) Research Guidelines (...

Saccharification of recalcitrant biomass and integration options for lignocellulosic sugars from Catchlight Energy's sugar process (CLE Sugar).

PubMed

Gao, Johnway; Anderson, Dwight; Levie, Benjamin

2013-01-28

Woody biomass is one of the most abundant biomass feedstocks, besides agriculture residuals in the United States. The sustainable harvest residuals and thinnings alone are estimated at about 75 million tons/year. These forest residuals and thinnings could produce the equivalent of 5 billion gallons of lignocellulosic ethanol annually. Softwood biomass is the most recalcitrant biomass in pretreatment before an enzymatic hydrolysis. To utilize the most recalcitrant lignocellulosic materials, an efficient, industrially scalable and cost effective pretreatment method is needed. Obtaining a high yield of sugar from recalcitrant biomass generally requires a high severity of pretreatment with aggressive chemistry, followed by extensive conditioning, and large doses of enzymes. Catchlight Energy's Sugar process, CLE Sugar, uses a low intensity, high throughput variation of bisulfite pulping to pretreat recalcitrant biomass, such as softwood forest residuals. By leveraging well-proven bisulfite technology and the rapid progress of enzyme suppliers, CLE Sugar can achieve a high yield of total biomass carbohydrate conversion to monomeric lignocellulosic sugars. For example, 85.8% of biomass carbohydrates are saccharified for un-debarked Loblolly pine chips (softwood), and 94.0% for debarked maple chips (hardwood). Furan compound formation was 1.29% of biomass feedstock for Loblolly pine and 1.10% for maple. At 17% solids hydrolysis of pretreated softwood, an enzyme dose of 0.075 g Sigma enzyme mixture/g dry pretreated (unwashed) biomass was needed to achieve 8.1% total sugar titer in the hydrolysate and an overall prehydrolysate liquor plus enzymatic hydrolysis conversion yield of 76.6%. At a much lower enzyme dosage of 0.044 g CTec2 enzyme product/g dry (unwashed) pretreated softwood, hydrolysis at 17% solids achieved 9.2% total sugar titer in the hydrolysate with an overall sugar yield of 85.0% in the combined prehydrolysate liquor and enzymatic hydrolysate. CLE Sugar has been demonstrated to be effective on hardwood and herbaceous biomass, making it truly feedstock flexible. Different options exist for integrating lignocellulosic sugar into sugar-using operations. A sugar conversion plant may be adjacent to a CLE Sugar plant, and the CLE Sugar can be concentrated from the initial 10% sugar as needed. Concentrated sugars, however, can be shipped to remote sites such as ethanol plants or other sugar users. In such cases, options for shipping a dense form of sugars include (1) pretreated biomass with enzyme addition, (2) lignocellulosic sugar syrup, and (3) lignocellulosic sugar solid. These could provide the advantage of maximizing the use of existing assets.

7 CFR 1217.50 - Budget and expenses.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer... anticipated expenses and disbursements in administering this part. The budget for research, promotion or...

7 CFR 1217.50 - Budget and expenses.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer... anticipated expenses and disbursements in administering this part. The budget for research, promotion or...

7 CFR 1217.50 - Budget and expenses.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer... anticipated expenses and disbursements in administering this part. The budget for research, promotion or...

7 CFR 1217.23 - Research.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false Research. 1217.23 Section 1217.23 Agriculture... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer Education...

7 CFR 1217.23 - Research.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 10 2012-01-01 2012-01-01 false Research. 1217.23 Section 1217.23 Agriculture... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer Education...

7 CFR 1217.23 - Research.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 10 2014-01-01 2014-01-01 false Research. 1217.23 Section 1217.23 Agriculture... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer Education...

Nondestructive Methods for Detecting Defects in Softwood Logs

Treesearch

Kristin C. Schad; Daniel L. Schmoldt; Robert J. Ross

1996-01-01

Wood degradation and defects, such as voids and knots, affect the quality and processing time of lumber. The ability to detect internal defects in the log can save mills time and processing costs. In this study, we investigated three nondestructive evaluation techniques for detecting internal wood defects. Sound wave transmission, x-ray computed tomography, and impulse...

Advanced biorefinery in lower termite-effect of combined pretreatment during the chewing process

PubMed Central

2012-01-01

Background Currently the major barrier in biomass utilization is the lack of an effective pretreatment of plant cell wall so that the carbohydrates can subsequently be hydrolyzed into sugars for fermentation into fuel or chemical molecules. Termites are highly effective in degrading lignocellulosics and thus can be used as model biological systems for studying plant cell wall degradation. Results We discovered a combination of specific structural and compositional modification of the lignin framework and partial degradation of carbohydrates that occurs in softwood with physical chewing by the termite, Coptotermes formosanus, which are critical for efficient cell wall digestion. Comparative studies on the termite-chewed and native (control) softwood tissues at the same size were conducted with the aid of advanced analytical techniques such as pyrolysis gas chromatography mass spectrometry, attenuated total reflectance Fourier transform infrared spectroscopy and thermogravimetry. The results strongly suggest a significant increase in the softwood cellulose enzymatic digestibility after termite chewing, accompanied with utilization of holocellulosic counterparts and an increase in the hydrolysable capacity of lignin collectively. In other words, the termite mechanical chewing process combines with specific biological pretreatment on the lignin counterpart in the plant cell wall, resulting in increased enzymatic cellulose digestibility in vitro. The specific lignin unlocking mechanism at this chewing stage comprises mainly of the cleavage of specific bonds from the lignin network and the modification and redistribution of functional groups in the resulting chewed plant tissue, which better expose the carbohydrate within the plant cell wall. Moreover, cleavage of the bond between the holocellulosic network and lignin molecule during the chewing process results in much better exposure of the biomass carbohydrate. Conclusion Collectively, these data indicate the participation of lignin-related enzyme(s) or polypeptide(s) and/or esterase(s), along with involvement of cellulases and hemicellulases in the chewing process of C. formosanus, resulting in an efficient pretreatment of biomass through a combination of mechanical and enzymatic processes. This pretreatment could be mimicked for industrial biomass conversion. PMID:22390274

Improvement of the fermentability of oxalic acid hydrolysates by detoxification using electrodialysis and adsorption.

PubMed

Jeong, So-Yeon; Trinh, Ly Thi Phi; Lee, Hong-Joo; Lee, Jae-Won

2014-01-01

A two-step detoxification process consisting of electrodialysis and adsorption was performed to improve the fermentability of oxalic acid hydrolysates. The constituents of the hydrolysate differed significantly between mixed hardwood and softwood. Acetic acid and furfural concentrations were high in the mixed hardwood, whereas 5-hydroxymethylfurfural (HMF) concentration was relatively low compared with that of the mixed softwood. The removal efficiency of acetic acid reached 100% by electrodialysis (ED) process in both hydrolysates, while those of furfural and HMF showed very low, due to non-ionizable properties. Most of the remaining inhibitors were removed by XAD-4 resin. In the mixed hardwood hydrolysate without removal of the inhibitors, ethanol fermentation was not completed. Meanwhile, both ED-treated hydrolysates successfully produced ethanol with 0.08 and 0.15 g/Lh ethanol productivity, respectively. The maximum ethanol productivity was attained after fermentation with 0.27 and 0.35 g/Lh of detoxified hydrolysates, which were treated by ED, followed by XAD-4 resin. Copyright © 2013 Elsevier Ltd. All rights reserved.

Removal of Water-Soluble Extractives Improves the Enzymatic Digestibility of Steam-Pretreated Softwood Barks.

PubMed

Frankó, Balázs; Carlqvist, Karin; Galbe, Mats; Lidén, Gunnar; Wallberg, Ola

2018-02-01

Softwood bark contains a large amounts of extractives-i.e., soluble lipophilic (such as resin acids) and hydrophilic components (phenolic compounds, stilbenes). The effects of the partial removal of water-soluble extractives before acid-catalyzed steam pretreatment on enzymatic digestibility were assessed for two softwood barks-Norway spruce and Scots pine. A simple hot water extraction step removed more than half of the water-soluble extractives from the barks, which improved the enzymatic digestibility of both steam-pretreated materials. This effect was more pronounced for the spruce than the pine bark, as evidenced by the 30 and 11% glucose yield improvement, respectively, in the enzymatic digestibility. Furthermore, analysis of the chemical composition showed that the acid-insoluble lignin content of the pretreated materials decreased when water-soluble extractives were removed prior to steam pretreatment. This can be explained by a decreased formation of water-insoluble "pseudo-lignin" from water-soluble bark phenolics during the acid-catalyzed pretreatment, which otherwise results in distorted lignin analysis and may also contribute to the impaired enzymatic digestibility of the barks. Thus, this study advocates the removal of extractives as the first step in the processing of bark or bark-rich materials in a sugar platform biorefinery.

Softwoods of North America

Treesearch

H. A. Alden

1997-01-01

This report describes 52 taxa of North American softwoods, which are organized alphabetically by genus. Descriptions include scientific name, trade name, distribution, tree characteristics, wood characteristics (e.g., general, weight, mechanical properties, drying, shrinkage, working properties, durability, preservation, uses, and toxicity), and additional sources of...

77 FR 25961 - Subsidy Programs Provided by Countries Exporting Softwood Lumber and Softwood Lumber Products to...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-02

... DEPARTMENT OF COMMERCE International Trade Administration Subsidy Programs Provided by Countries...: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (Department) seeks public comment on any subsidies, including stumpage subsidies...

76 FR 67148 - Subsidy Programs Provided by Countries Exporting Softwood Lumber and Softwood Lumber Products to...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-31

... DEPARTMENT OF COMMERCE International Trade Administration Subsidy Programs Provided by Countries...: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (Department) seeks public comment on any subsidies, including stumpage subsidies...

78 FR 24724 - Subsidy Programs Provided by Countries Exporting Softwood Lumber and Softwood Lumber Products to...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-26

... DEPARTMENT OF COMMERCE International Trade Administration Subsidy Programs Provided by Countries...: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (Department) seeks public comment on any subsidies, including stumpage subsidies...

76 FR 22751 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

... 23, 2011. FOR FURTHER INFORMATION CONTACT: Maureen T. Pello, Marketing Specialist, Research and... procedure, Advertising, Consumer information, Marketing agreements, Softwood lumber, Promotion, Reporting... Vol. 76 Friday, No. 78 April 22, 2011 Part II Department of Agriculture Agricultural Marketing...

Florida harvest and utilization study, 2008

Treesearch

James W. Bentley; Tony G. Johnson

2009-01-01

In 2008, a harvest and utilization study was conducted on 82 operationsthroughout Florida. There were 2,114 total trees measured: 1,670 or79 percent were softwood, while 444 or 21 percent were hardwood. Resultsfrom this study showed that 85 percent of the total softwood volumemeasured was...

Virginia harvest and utilization study, 2007

Treesearch

James W. Bentley; Tony G. Johnson

2009-01-01

In 2007, a harvest and utilization study was conducted on 81 operationsthroughout Virginia. There were 2,016 total trees measured; 1,086 or54 percent were softwood, while 930 or 46 percent were hardwood. Resultsfrom this study showed that 86 percent of the total softwood volumemeasured was...

ReaxFF Study of the Oxidation of Softwood Lignin in View of Carbon Fiber Production

DOE PAGES

Beste, Ariana

2014-10-06

We investigate the oxidative, thermal conversion of softwood lignin by performing molecular dynamics simulations based on a reactive force field (ReaxFF). The lignin samples are constructed from coniferyl alcohol units, which are connected through linkages that are randomly selected from a natural distribution of linkages in softwood. The goal of this work is to simulate the oxidative stabilization step during carbon fiber production from lignin precursor. We find that at simulation conditions where stabilization reactions occur, the lignin fragments have already undergone extensive degradation. The 5-5 linkage shows the highest reactivity towards cyclization and dehydrogenation.

What's ahead in automated lumber grading

Treesearch

D. Earl Kline; Richard Conners; Philip A. Araman

1998-01-01

This paper discusses how present scanning technologies are being applied to automatic lumber grading. The presentation focuses on 1) what sensing and scanning devices are needed to measure information for accurate grading feature detection, 2) the hardware and software needed to efficiently process this information, and 3) specific issues related to softwood lumber...

Markets

Treesearch

David N. Wear; Jeffrey Prestemon; Robert Huggett; Douglas Carter

2013-01-01

Key FindingsAlthough timber production in the South more than doubled from the 1960s to the late 1990s, output levels have declined over the last 10 years, signaling structural changes in timber markets.For softwood products, production declines are most clearly related to demand issues. Demand for softwood solid wood products...

Louisiana forests: Status and outlook

Treesearch

Paul A. Murphy

1975-01-01

Between 1964 and 1974, forest area in Louisiana declined 9 percent to 14.5 million acres. Softwood volume increased 31 percent to 9 billion cubic feet, and hardwood declined 7 percent to 7.7 billion. All softwood size classes had increases in volume, and all hardwood size classes had decreases.

Humidity Data for 9975 Shipping Packages with Softwood Fiberboard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daugherty, W. L.

The 9975 surveillance program is developing a technical basis to support extending the storage period of 9975 packages in K-Area Complex beyond the currently approved 15 years. A key element of this effort is developing a better understanding of degradation of the fiberboard assembly under storage conditions. This degradation is influenced greatly by the moisture content of the fiberboard, which is not well characterized on an individual package basis. Direct measurements of humidity and fiberboard moisture content have been made on two test packages with softwood fiberboard and varying internal heat levels from 0 up to 19W. Comparable measurements withmore » cane fiberboard have been reported previously. With an internal heat load, a temperature gradient in the fiberboard assembly leads to varying relative humidity in the air around the fiberboard. However, the absolute humidity tends to remain approximately constant throughout the package, especially at lower heat loads.« less

Midsouth veneer industry

Treesearch

Dennis M. May; John S. Vissage

1990-01-01

The USDA Forest Service, Southern Forest Experiment Station's latest survey of the Midsouth veneer industry shows the softwood veneer industry continuing its dominance as the hardwood veneer industry has continued to decline. The number of softwood mills has stabilized after years of growth, while both commercial and container hardwood mills have decreased in...

Use of near infared spectroscopy to predict the mechanical properties of six softwoods

Treesearch

Stephen S. Jelley; Timothy G. Rials; Leslie H. Groom; Chi-Leung So

2004-01-01

The visible and near infrared (NIR)(500-2400 nm) spectra and mechanical properties of almost 1000 small clear-wood samples from six softwood species: Pinus taeda L. (loblolly pine), Pinus palustris, Mill. (longleaf pine), Pinus elliottii Engelm. (slash pine), Pinus echinata Mill. (shortleaf...

78 FR 65970 - Subsidy Programs Provided by Countries Exporting Softwood Lumber and Softwood Lumber Products to...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-04

... DEPARTMENT OF COMMERCE International Trade Administration Subsidy Programs Provided by Countries... Commerce. SUMMARY: The Department of Commerce (Department) seeks public comment on any subsidies, including..., International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW...

7 CFR 1217.53 - Exemption from assessment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... shipments and imports during a fiscal year shall count towards the 15 million board feet exemption. (6.... (1) Domestic manufacturers who ship less than 15 million board feet of softwood lumber within the... 15 million board feet of softwood lumber within the United States during the fiscal year shall...

7 CFR 1217.53 - Exemption from assessment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... shipments and imports during a fiscal year shall count towards the 15 million board feet exemption. (6.... (1) Domestic manufacturers who ship less than 15 million board feet of softwood lumber within the... 15 million board feet of softwood lumber within the United States during the fiscal year shall...

7 CFR 1217.53 - Exemption from assessment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... shipments and imports during a fiscal year shall count towards the 15 million board feet exemption. (6.... (1) Domestic manufacturers who ship less than 15 million board feet of softwood lumber within the... 15 million board feet of softwood lumber within the United States during the fiscal year shall...

Kiln drying maple for structural uses

Treesearch

Xiping Wang; William T. Simpson; Brian K. Brashaw; Robert J. Ross

2002-01-01

Structural lumber products are traditionally manufactured from softwoods. However, with shrinking supplies of softwood lumber and abundant supplies of hardwood lumber, there is increasing interest in the use of hardwoods for structural applications. One factor that will be important in both the technical and economic feasibility of using hardwoods for structural lumber...

Potential for forest products in interior Alaska.

Treesearch

George R. Sampson; Willem W.S. van Hees; Theodore S. Setzer; Richard C. Smith

1988-01-01

Future opportunities for producing Alaska forest products were examined from the perspective of timber supply as reported in timber inventory reports and past studies of forest products industry potential. The best prospects for increasing industrial production of forest products in interior Alaska are for softwood lumber. Current softwood lumber production in the...

Multifactorial modelling of high-temperature treatment of timber in the saturated water steam medium

NASA Astrophysics Data System (ADS)

Prosvirnikov, D. B.; Safin, R. G.; Ziatdinova, D. F.; Timerbaev, N. F.; Lashkov, V. A.

2016-04-01

The paper analyses experimental data obtained in studies of high-temperature treatment of softwood and hardwood in an environment of saturated water steam. Data were processed in the Curve Expert software for the purpose of statistical modelling of processes and phenomena occurring during this process. The multifactorial modelling resulted in the empirical dependences, allowing determining the main parameters of this type of hydrothermal treatment with high accuracy.

Selective Cleavage of the Aryl Ether Bonds in Lignin for Depolymerization by Acidic Lithium Bromide Molten Salt Hydrate under Mild Conditions.

PubMed

Yang, Xiaohui; Li, Ning; Lin, Xuliang; Pan, Xuejun; Zhou, Yonghong

2016-11-09

The present study demonstrates that the concentrated lithium bromide (LiBr) solution with acid as catalyst was able to selectively cleave the β-O-4 aryl ether bond and lead to lignin depolymerization under mild conditions (e.g., in 60% LiBr with 0.3 M HCl at 110 °C for 2 h). Four industrial lignins from different pulping and biorefining processes, including softwood kraft lignin (SKL), hardwood kraft lignin (HKL), softwood ethanol organosolv lignin (EOL), and acid corncob lignin (ACL), were treated in the LiBr solution. The molecular weight, functional group, and interunit linkages of the lignins were characterized using GPC, FTIR, and NMR. The results indicated that the β-O-4 aryl ether bonds of the lignins were selectively cleaved, and both LiBr and HCl played crucial roles in catalyzing the cleavage of the ether bonds.

75 FR 30097 - Notice and Request for Comments: Canada-Compliance With Softwood Lumber Agreement

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-28

... Lumber Agreement (SLA), Canada agreed to impose export measures on Canadian exports of softwood lumber... bill becomes law by receiving royal assent, and if the Trade Representative finds that the law... On March 4, 2010, the Canadian Parliament introduced as part of the Federal budget an amendment to...

Band vs. Circular Sawmills: Relative Labor & Maintenance Costs

Treesearch

Philip H. Steele; Philip A. Araman

1997-01-01

Substantial sawmill lumber yield increases from kerf and sawing variation reductions can be realized by employing band rather than circular headrigs. Softwood sawmills rapidly adopted bandsaw headrig technology to the extent that it is currently unusual to find circular saw headrigs in a softwood sawmill. Hardwood sawmills, faced with a different economic situation,...

76 FR 57102 - Notice and Request for Comments: Two-Year Extension of Softwood Lumber Agreement

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-15

... additional two years. The United States is considering extending the SLA through October 12, 2015. Interested... additional 2 years.'' Without an extension, the Agreement will expire in October 12, 2013. USTR is... for Comments: Two-Year Extension of Softwood Lumber Agreement AGENCY: Office of the United States...

7 CFR 1217.41 - Nominations and appointments.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and/or import 15 million board feet or more of softwood lumber per fiscal year in order to generate... domestically manufacture and/or import 15 million board feet or more of softwood lumber per fiscal year; (2... to the Secretary and recommend two nominees for each Board position specified in paragraphs (b)(1...

Mechanical deconstruction of lignocellulose cell walls and their enzymatic saccharification

Treesearch

Ingrid C. Hoeger; Sandeep S. Nair; Arthur J. Ragauskas; Yulin Deng; Orlando J. Rojas; J.Y. Zhu

2013-01-01

Laboratory mechanical softwood pulps (MSP) and commercial bleached softwood kraft pulps (BSKP) were mechanically fibrillated by stone grinding with a SuperMassColloider®. The extent of fibrillation was evaluated by SEM imaging, water retention value (WRV) and cellulase adsorption. Both lignin content and mechanical treatment significantly affected deconstruction and...

Robust and efficient enzymatic saccharification of softwoods by SPORL

Treesearch

J.Y. Zhu; X.J. Pan; W. Zhu; G.S. Wang; R. Gleisner

2009-01-01

This study demonstrated Sulfite Pretreatment to Overcome Recalcitrance of Lignocellulose (SPORL) for robust conversion of softwood through enzymatic hydrolysis. At a sodium bisulfite charge around 9%, over 90% cellulose conversion could be achieved when spruce wood chips were pretreated at 180°C with pH near 2. For lodgepole pine, pretreatment liquor initial...

Trends in Southern pulpwood production, 1953-1993

Treesearch

Tony G. Johnson

1996-01-01

Southern pulpwood production has increased more than fourfold from 16.2 million cords in 1953 to 66.3 million cords in 1993. Softwood roundwood production more than doubled in the same time period; however, softwood production expressed as a proportion of the total production dramatically declined. In contrast, hardwood roundwood production and production from residues...

Butyric acid production from softwood hydrolysate by acetate-consuming Clostridium sp. S1 with high butyric acid yield and selectivity.

PubMed

Kim, Minsun; Kim, Ki-Yeon; Lee, Kyung Min; Youn, Sung Hun; Lee, Sun-Mi; Woo, Han Min; Oh, Min-Kyu; Um, Youngsoon

2016-10-01

The aim of this work was to study the butyric acid production from softwood hydrolysate by acetate-consuming Clostridium sp. S1. Results showed that Clostridium sp. S1 produced butyric acid by simultaneously utilizing glucose and mannose in softwood hydrolysate and, more remarkably, it consumed acetic acid in hydrolysate. Clostridium sp. S1 utilized each of glucose, mannose, and xylose as well as mixed sugars simultaneously with partially repressed xylose utilization. When softwood (Japanese larch) hydrolysate containing glucose and mannose as the main sugars was used, Clostridium sp. S1 produced 21.17g/L butyric acid with the yield of 0.47g/g sugar and the selectivity of 1 (g butyric acid/g total acids) owing to the consumption of acetic acid in hydrolysate. The results demonstrate potential of Clostridium sp. S1 to produce butyric acid selectively and effectively from hydrolysate not only by utilizing mixed sugars simultaneously but also by converting acetic acid to butyric acid. Copyright © 2016 Elsevier Ltd. All rights reserved.

Mississippi forest industry

Treesearch

Dwane D. Van Hooser

1968-01-01

Nearly 402 million cubic feet of industrial roundwood were harvested in Mississippi in 1966. This was the largest harvest in a decade. Nearly three-fifths was softwood-mainly pine. Altogether, 305 million cubic feet were processed by the State's forest industries. Some 123 million cubic feet were shipped to surrounding States, while 26 million cubic feet were...

Low-temperature, Low-Energy, and High-Efficiency Pretreatment Technology for Large Wood Chips with a Redox Couple Catalyst.

PubMed

Gogoi, Parikshit; Zhang, Zhe; Geng, Zhishuai; Liu, Wei; Hu, Weize; Deng, Yulin

2018-03-22

The pretreatment of lignocellulosic biomass plays a vital role in the conversion of cellulosic biomass to bioethanol, especially for softwoods and hardwoods. Although many pretreatment technologies have been reported so far, only a few pretreatment methods can handle large woodchips directly. To improve the efficiency of pretreatment, existing technologies require the grinding of the wood into small particles, which is an energy-consuming process. Herein, for the first time, we report a simple, effective, and low-temperature (≈100 °C) process for the pretreatment of hardwood (HW) and softwood (SW) chips directly by using a catalytic system of FeCl 3 /NaNO 3 (FCSNRC). The pretreatment experiments were conducted systematically, and a conversion of 71.53 and 70.66 % of cellulose to sugar could be obtained for the direct use of large HW and SW chips. The new method reported here overcomes one of the critical barriers in biomass-to-biofuel conversion, and both grinding and thermal energies can be reduced significantly. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Acoustic evaluation of standing trees : recent research development

Treesearch

Xiping Wang; Robert J. Ross; Peter Carter

2005-01-01

This paper presents some research results from recent trial studies on measuring acoustic velocities on standing trees of five softwood species. The relationships between tree velocities measured by time of flight method and log velocities measured by resonance method were evaluated. Theoretical and empirical models were developed for adjusting observed tree velocity...

Virginia's forests, 1992

Treesearch

Michael T. Thompson; Tony G. Johnson

1994-01-01

Since 1986, area of timberland in Virginia declined by 1 percent and currently totals 15.4 million acres. Nonindustrial private owners control 77 percent of the State's timberland. Volume of softwood growing stock increased 6 percent to 6.6 billion cubic feet, and hardwood growing-stock volume was up by an equal rate to 19.8 billion cubic feet. Softwood net...

Productivity and trade during the softwood lumber dispute

Treesearch

Rao V Nagubadi; Henry Thompson; Daowei Zhang

2009-01-01

The gap in total factor productivity in sawmills and wood preservation between the US and Canada generally increased from 1958 to 2005. The present paper examines the effects of the various phases of the softwood lumber dispute, including relatively free trade, Canadian export taxes, and low and high countervailing duties, on this productivity gap. Exogeneous control...

75 FR 53014 - Notice and Modification of Action: Canada-Compliance with Softwood Lumber Agreement

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

... Agreement (SLA), Canada agreed to impose export measures on Canadian exports of softwood lumber products to... until the total of the amounts collected under the U.S. import duty and the Canadian charge on exports... Canadian charge on exports is equal to CDN $68 million. The understanding also provides for the United...

Structural changes of residual lignin of softwood and hardwood kraft pulp upon oxidative treatment with polyoxometalates

Treesearch

Biljana Bujanovic; Richard S. Reiner; Sally A. Ralph; Umesh P. Agarwal; Rajai H. Atalla

2005-01-01

Structural transformation of lignin in pulps bleached with polyoxometalates (POMs) should be explored in order to gain insight into the lignin reactions leading to its solubilization during POM treatment of kraft pulp. Our studies include characterization of residual lignin isolated from softwood commercial and birch laboratory kraft pulps delignified with POMs....

Environmental impact of manufacturing softwood lumber in northeastern and north central United States

Treesearch

Richard D. Bergman; Scott A. Bowe

2010-01-01

Finding the environmental impact of building materials is becoming increasingly more important because of public environmental awareness. Accurate and precise life-cycle inventory data on wood products are needed to meet this demand. This study examined softwood lumber manufacturing in the northeastern and north central US using life-cycle inventory methods. Material...

Analysis of the interaction between timber markets and the forest resources of Maine

Treesearch

William G. Luppold; Paul E. Sendak

2004-01-01

The abundant timber resources of Maine are critical to the State's timber economy; thus, when the 1995 forest inventory indicated a 20% decline in softwood growing stock, there was great concern by industry and government. Furthermore, declining near-term softwood growing stock levels were forecast. To better understand what was occurring in Maine's forest,...

Analysis of the Interaction Between Timber Markets and the Forest Resources of Maine

Treesearch

William G. Luppold

2004-01-01

The abundant timber resources of Maine are critical to the State's timber economy; thus, when the 1995 forest inventory indicated a 20% decline in softwood growing stock, there was great concern by industry and government. Furthermore, declining near-term softwood growing stock levels were forecast. To better understand what was occurring in Maine's forest,...

Mississippi forests - trends and outlook

Treesearch

Paul A. Murphy

1978-01-01

Softwood inventory in sound, well-formed trees increased 30 percent since the previous survey, and hardwoods gained 17 percent. This increase in volume rose in all parts of the State, but the extent of increase varied widely by region. Timber growth exceeded removals in 1976. despite the doubling in softwood harvest since 1966. An imbalance between growth and removals...

Mixedwood management in the Northeastern United States

Treesearch

Laura S. Kenefic

2016-01-01

In the Northeast, we recognize mixedwood stands as hardwood- softwood mixtures in which neither component contributes more than 75% - 80% of stocking (usually assessed in terms of basal area). Such stands have long been recognized in regional forest type codes used by commercial land managers, i.e., SH for softwood-dominated mixedwoods and HS for hardwood-dominated...

Potential Pacific Rim demand for construction-grade softwood logs.

Treesearch

Donald F. Flora; Richard R. Vlosky

1986-01-01

Markets for small lower grade ("construction-grade"), softwood logs are projected to expand steadily through 1995. Log supplies will lag slightly behind demand until 1990, generating about a 10-percent increase in prices. Prices are expected to be level thereafter. United States exports of construction-grade logs are projected to increase 35 percent by 1990...

Structural Change in Southern Softwood Stumpage Markets

Treesearch

Douglas R. Carter

1998-01-01

The potential for structural change in southern stumpage market models has impacts on not only our basic understanding of those markets, but also on harvest, inventory and price projections, and related policy. In this paper, we test for structural change in both sawtimber and pulpwood softwood stumpage markets in the U.S. South over the period 1950-1994. Test...

Defect reduction in low-value white oak lumber using restrained drying

Treesearch

Shawn T. Grushecky; Oluwatosin Adedipe; Charlie II Collins; Brian Cox; Colin Dougherty

2008-01-01

Increasing emphasis is being placed on alternative processing methods for low-value hardwoods. Extensive research has shown that drying softwood lumber using edge-wise restraint improves product and value yields. Currently, the effects of restraint drying on product and value yields from low-grade hardwood lumber have not been investigated. We evaluated the use of a...

Estimated timber harvest by U.S. region and ownership, 1950-2002.

Treesearch

Darius M. Adams; Richard W. Haynes; Adam J. Daigneault

2006-01-01

This publication provides estimates of total softwood and hardwood harvests by region and owner for the United States from 1950 to 2002. These data are generally not available in a consistent fashion and have to be estimated from state-level data, forest resource inventory statistics, and production of forest products. This publication describes the estimation process...

House log drying rates in southeast Alaska for covered and uncovered softwood logs

Treesearch

David Nicholls; Allen Brackley

2009-01-01

Log moisture content has an important impact on many aspects of log home construction, including log processing, transportation costs, and dimensional stability in use. Air-drying times for house logs from freshly harvested trees can depend on numerous factors including initial moisture content, log diameter, bark condition, and environmental conditions during drying....

Multistep process to produce fermentable sugars and lignosulfonates from softwood enzymolysis residues

Treesearch

Yalan Liu; Jinwu Wang; Michael P. Wolcott

2016-01-01

The residual solids from enzymatic hydrolysis are usually burned to produce energy and have been explored as a feedstock for various products including activated carbon and lignin based polymers. These products require additional procedures unrelated to the existing biorefinery equipment. In the current study, we proposed successive sulfite treatments to utilize the...

Model Study To Assess Softwood Hemicellulose Hydrolysates as the Carbon Source for PHB Production in Paraburkholderia sacchari IPT 101.

PubMed

Dietrich, Karolin; Dumont, Marie-Josée; Schwinghamer, Timothy; Orsat, Valérie; Del Rio, Luis F

2018-01-08

Softwood hemicellulose hydrolysates are a cheap source of sugars that can be used as a feedstock to produce polyhydroxybutyrates (PHB), which are biobased and compostable bacterial polyesters. To assess the potential of the hemicellulosic sugars as a carbon source for PHB production, synthetic media containing softwood hemicellulose sugars (glucose, mannose, galactose, xylose, arabinose) and the potentially inhibitory lignocellulose degradation products (acetic acid, 5-hydroxymethylfurfural (HMF), furfural, and vanillin) were fermented with the model strain Paraburkholderia sacchari IPT 101. Relative to pure glucose, individual fermentation for 24 h with 20 g/L mannose or galactose exhibited maximum specific growth rates of 97% and 60%, respectively. On the other hand, with sugar mixtures of glucose, mannose, galactose, xylose, and arabinose, the strain converted all sugars simultaneously to reach a maximum PHB concentration of 5.72 g/L and 80.5% PHB after 51 h. The addition of the inhibitor mixture at the following concentration, sodium acetate (2.11 g/L), HMF (0.67 g/L), furfural (0.66 g/L), and vanillin (0.93 g/L), to the sugar mixture stopped the growth entirely within 24 h. Individually, the inhibitors either had no effect or only reduced growth. Moreover, it was found that a bacterial inoculum with high initial cell density (optical density, OD ≥ 5.6) could overcome the growth inhibition to yield an OD of 13 within 24 h. Therefore, softwood hemicellulose sugars are viable carbon sources for PHB production. Nevertheless, real softwood hemicellulose hydrolysates need detoxification or a high inoculum to overcome inhibitory effects and allow bacterial growth.

Gluing of Eastern Hardwoods: A Review

Treesearch

Terry Sellers; James R. McSween; William T. Nearn

1988-01-01

Over a period of years, inrreasing demand for softwoods in the Eastern United States has led to an increase in the growth of hardwoods on cut-over softwood sites. Unfortunately these hardwood trees are often of a size and shape unsuitable for the production of high-grade lumber and veneer. They do, however, represent a viable, economic soures of raw material for...

South Carolina harvest and utilization study, 2011

Treesearch

Kerry J.W. Dooley; Jason A. Cooper; James W. Bentley

2015-01-01

In 2011, a harvest and utilization study was conducted on 80 operations throughout South Carolina. There were 1,974 total trees measured; 1,317 or 67 percent were softwood, while 657 or 33 percent were hardwood. Results from this study showed that 86 percent of the total softwood volume measured was utilized for a product, and 14 percent was left as logging residue....

Georgia harvest and utilization study, 2015

Treesearch

David J. Wall; James W. Bentley; James A. Gray; Jason A. Cooper

2018-01-01

In 2014, a harvest and utilization study was conducted on 91 operations throughout Georgia. There were 2,129 total trees measured: 1,842 or 87 percent were softwood, while 287 or 13 percent were hardwood. Results from this study showed that 87 percent of the total softwood volume measured was utilized for a product, and 13 percent was left as logging residue. Seventy-...

Trends in Southern pulpwood production, 1953-2006

Treesearch

Tony G. Johnson; Carolyn D. Steppleton; Michael Howell

2008-01-01

Southern pulpwood production has increased nearly fourfold from 16.2 million cords (43.9 million green tons) in 1953 to 64.7 million cords (170.9 million green tons) in 2006. Softwood roundwood production more than doubled in the same time period; however, softwood production expressed as a proportion of the total production has declined from 87 percent in 1953 to 49...

Ten-year performance of treated northeastern softwoods in aboveground and ground-contact exposures

Treesearch

Douglas M. Crawford; Rodney C. De Groot; Lee R. Gjovik

The commercial value of several softwood species of the northeastern United States could be increased if these woods could be treated to meet existing American Wood Preserversa Association (AWPA) Standards and used in durable structures. We evaluated the long-term durability of incised and unincised white pine, red pine, eastern spruce, balsam fir, and eastern hemlock...

Softwood distribution maps for the South

Treesearch

Paul L. Janssen; Melvin R. Weiland

1960-01-01

The maps in this report describe the relative concentration as well as the approximate range of 11 softwoods in 12 southern states--extending from the Atlantic Coast westward to about the 96th meridian in Oklahoma and Texas. The data upon which the maps are based were gathered during 1947-57 by the Forest Surveys of the Southern and Southeastern Forest Experiment...

North Carolina harvest and utilization study, 2015

Treesearch

David J. Wall; Jason A. Cooper; James W. Bentley; James A. Gray

2018-01-01

In 2015, a harvest and utilization study was completed on 95 operations throughout North Carolina. There were 2,125 total trees measured: 1,284 or 60 percent were softwood, while 841 or 40 percent were hardwood. Results from this study showed that 85 percent of the total softwood volume measured was utilized for a product, and 15 percent was left as logging residue....

Utilization of the Southern Pines - Volume 1

Treesearch

Peter Koch

1972-01-01

The southern pines comprise the primary softwood timber species in the United States. Further, their relative importance is increasing. It is estimated that by the year 2000, 51 percent of the softwood used in this country will come from the South (USDA Forest Service 1965, p. 112). These pines occupy about 20 percent of the 509 million acres of commercial forest land...

Eastern Texas harvest and utilization study, 2003

Treesearch

James W. Bentley; Tony G. Johnson

2004-01-01

In 2003, a harvest and utilization study was conducted on 81 operations throughout eastern Texas. There were 2,072 total trees measured, 1,557 or 75 percent were softwood, while 515 or 25 percent were hardwood. Results from this study showed that 87 percent of the total softwood volume measured was utilized for a product, while the other 13 percent was left as logging...

Individual tree differences confound effects of growth regulators in rooting sugar maple softwood cuttings

Treesearch

John R. Donnelly

1971-01-01

Softwood stem cuttings from three mature sugar maple trees were treated with several types and concentrations of growth regulators. Lack of statistical significance was due to extreme variability in tree response: low levels of auxin stimulated rooting in two study trees, while auxins inhibited rooting in the other tree. It is postulated that variations in rooting...

North Carolina harvest and utilization study, 2007

Treesearch

James W. Bentley; Tony G. Johnson

2010-01-01

In 2007, a harvest and utilization study was conducted on 83 operations throughout North Carolina. There were 2,119 total trees measured: 1,323 or 62 percent were softwood, while 796 or 38 percent were hardwood. Results from this study showed that 85 percent of the total softwood volume measured was utilized for a product, and 15 percent was left as logging residue....

South Carolina harvest and utilization study, 2006

Treesearch

James W. Bentley; Tony G. Johnson

2008-01-01

In 2006, a harvest and utilization study was conducted on 99 operations throughout South Carolina. There were 2,904 total trees measured; 1,763 or 61 percent were softwood, while 1,141 or 39 percent were hardwood. Results from this study showed that 87 percent of the total softwood volume measured was utilized for a product, and 13 percent was left as logging residue....

Georgia harvest and utilization study, 2009

Treesearch

James W. Bentley

2011-01-01

In 2009, a harvest and utilization study was conducted on 80 operations throughout Georgia. There were 1,981 total trees measured: 1,453 or 73 percent were softwood, while 528 or 27 percent were hardwood. Results from this study showed that 88 percent of the total softwood volume measured was utilized for a product, and 12 percent was left as logging residue. Seventy-...

Georgia harvest and utilization study, 2004

Treesearch

James W. Bentley; Richard a. Harper

2006-01-01

In 2004, a harvest and utilization study was conducted on 96 operations throughout Georgia. There were 2,368 total trees measured, 1,581 or 67 percent were softwood, while 787 or 33 percent were hardwood. Results from this study showed that 86 percent of the total softwood volume measured was utilized for a product, while the other 14 percent was left as logging...

Alabama harvest and utilization study, 2008

Treesearch

James W. Bentley; Tony G. Johnson

2008-01-01

In 2008, a harvest and utilization study was conducted on 80 operations throughout Alabama. There were 2,100 total trees measured; 1,433 or 68 percent were softwood, while 667 or 32 percent were hardwood. Results from this study showed that 88 percent of the total softwood volume measured was utilized for a product, and 12 percent was left as logging residue. Seventy-...

North Carolina harvest and utilization study, 2002

Treesearch

James W. Bentley; Tony G. Johnson

2006-01-01

In 2002, a harvest and utilization study was conducted on 108 operations throughout North Carolina. There were 2,926 total trees measured; 1,693, or 58 percent, were softwood, while 1,233, or 42 percent, were hardwood. Results from this study showed that 86 percent of the total softwood volume measured was utilized for a product, and 14 percent was left as logging...

Hardwood pulpwood stumpage price trends in the northeast.

Treesearch

Lloyd C. Irland; Paul E. Sendak; Richard H. Widmann

2001-01-01

Hardwood pulpwood consumption has increased in five leading Northeastern states from 1.2 million cords in 1963 to 4.6 million cords in 1997. A shift from the reliance on softwoods has occurred and by the mid-1970s hardwood use exceeded softwood. This increases the importance of the markets for hardwood pulpwood. These five states?Maine, New Hampshire, New York,...

East Texas harvest and utilization study, 2014

Treesearch

Jason A. Cooper; James W. Bentley; James A. Gray; David J. Wall

2017-01-01

In 2014, a harvest and utilization study was completed on 68 logging operations throughout eastern Texas. There were 1,464 total trees measured: 1,149 or 78 percent were softwood, while 315 or 22 percent were hardwood. Results from this study showed that 81 percent of the total softwood volume measured was utilized for a product, and 19 percent was left as logging...

Kentucky harvest and utilization study, 2007

Treesearch

Jason A. Cooper; James W. Bentley

2013-01-01

In 2007, a harvest and utilization study was conducted on 53 operations in Kentucky. There were 1,310 total trees measured: 263 or 20 percent were softwood, while 1,047 or 80 percent were hardwood. Results from this study showed that 82 percent of the total softwood volume measured was utilized for a product, and 18 percent was left as logging residue. Seventy-two...

Field experiences in pre-commercial thinning, planting and container growing of northern softwoods

Treesearch

L. Oscar Selin

1977-01-01

In preparation for intensive logging mechanization and for the subsequent silvicultural treatments of clearcut areas the Woodland Division of Georgia-Pacific Corporation started a pre-commercial thinning trials in young softwood and mixed wood stands during the spring and early summer of 1970. Pre-commercial thinnings were intended to be a backbone of a large scale...

U.S. Policy and Canadian Lumber: Effects of the 1986 Memorandum of Understanding

Treesearch

David N. Wear; Karen J. Lee

1993-01-01

A 1986 Memorandum of Understanding on softwood lumber imports (MOU) between Canada and the United States required that provinvial governments levy export taxes on softwood lumber shipped to the United States. This agreement, with subsequent amendments, influenced trade from 1987 until it was abandoned by Canada in October of 1991. This paper investigates the market...

Carbon Mitigation Impacts of Increased Softwood Lumber and Structural Panel Use for Nonresidential Construction in the United States

Treesearch

Prakash Nepal; Kenneth E. Skog; David B. McKeever; Richard D. Bergman; Karen L. Abt; Robert C. Abt

2016-01-01

More wood use in the United States to construct low-rise nonresidential (NR) buildings would increase consumption and production of softwood (SW) lumber, engineered wood products, and structural and nonstructural wood panels. Using a consequential life-cycle analysis, we estimated the change in net CO2 emissions thatwould be caused by increased...

Profile 2003: softwood sawmills in the United States and Canada

Treesearch

Henry Spelter; Matthew Alderman

2003-01-01

About 160 fewer softwood sawmills are operating in the United States and Canada than were 8 years ago. Nevertheless, the combined capacity of the remaining mills has increased by 16%, to over 173 million cubic meters. Of the approximately 1,140 mills, about 470 characterize their output as dimension lumber, accounting for 67% of capacity; 136 list studs as their...

East Texas harvest and utilization study, 2008

Treesearch

Rhonda M. Mathison; James W. Bentley; Tony G. Johnson

2009-01-01

In 2008, a harvest and utilization study was conducted on 80 operations throughout eastern Texas. There were 2,024 total trees measured: 1,335 or 66 percent were softwood, while 689 or 34 percent were hardwood. Results from this study showed that 86 percent of the total softwood volume measured was utilized for a product, and 14 percent was left as logging...

East Oklahoma harvest and utilization study, 2008

Treesearch

Jason A. Cooper; James W. Bentley

2013-01-01

In 2008, a harvest and utilization study was conducted on 28 operations in eastern Oklahoma. There were 682 total trees measured: 509 or 75 percent were softwood, while 173 or 25 percent were hardwood. Results from this study showed that 86 percent of the total softwood volume measured was utilized for a product, and 14 percent was left as logging residue. Seventy-four...

A preview of New Jersey's forest resource

Treesearch

Joseph E. Barnard; Teresa M. Bowers

1973-01-01

The recently completed forest survey of New Jersey indicates that 54 percent of the land area has tree cover on it. Thirty-eight percent of the state is classified as commercial forest land. Total growing-stock volume has increased, although the softwood component of the resource has decreased in both cubic-foot volume and area occupied by the softwood types. Average...

East Texas forests, 2003

Treesearch

Victor A. Rudis; Burl Carraway; Raymond M. [and others] Sheffield

2008-01-01

Forest land covers 12.1 million acres in east Texas, or about 57 percent of the land area. The majority of forests, 11.9 million acres, are classed as timberland. The 2003 timberland area is the highest recorded since 1975. Forests classed as softwood forest types were found on 5.2 million acres of the timberland; almost one-half of the softwood forests are pine...

Simple models for estimating local removals of timber in the northeast

Treesearch

David N. Larsen; David A. Gansner

1975-01-01

Provides a practical method of estimating subregional removals of timber and demonstrates its application to a typical problem. Stepwise multiple regression analysis is used to develop equations for estimating removals of softwood, hardwood, and all timber from selected characteristics of socioeconomic structure.

Investigating the use of small-diameter softwood as guardrail posts (dynamic test results)

Treesearch

Jason A. Hascall; John D. Reid; Ronald K. Faller; Dean L. Sicking; David E. Kretschmann

2007-01-01

A modified version of the Midwest Guardrail System (MGS), utilizing small-diameter round wood posts, was developed, tested, and evaluated. Three systems were developed using different species of timber, Douglas Fir, Ponderosa Pine, and Southern Yellow Pine. A combination of Barrier VII computer simulation modeling and several series of cantilever bogie tests, conducted...

Shoot size significantly affects rooting response of sugar maple softwood cuttings

Treesearch

John R. Donnelly

1974-01-01

Three hundred softwood cuttings were collected from each of three mature sugar maple trees to test the effect of shoot size on adventitious root formation. One of the trees was a good rooter (61 percent rooted); one was a poor rooter (19 percent rooted); and the third was a non-rooter (1 percent rooted). There was an insufficient number of rooted cuttings from the...

Forcing Epicormic Sprouts on Branch Segments of Adult Hardwoods for Softwood Cuttings

Treesearch

J. W. Van Sambeek; John E. Preece; Mark V. Coggeshall

2003-01-01

Branch segments cut from basal limbs of transitional or adult hardwood trees were forced in the greenhouse to initiate shoot growth from latent buds for the production of softwood cuttings. Forcing in February, March, and April produced 10 to 15 visible buds or elongating shoots per meter of branch wood, which was more than twice the number during any other month. On...

Federal timber restrictions, interregional spillovers, and the impact on US softwood markets

Treesearch

David N. Wear; Brian C. Murray

2004-01-01

An econometric model of the US softwood lumber and timber markets is estimated and used to simulate the price, trade, and welfare effects of reductions in federal timber sales in the western US commencing in the late 1980s. Results indicate that the timber sale reductions increased lumber prices by roughly 15 percent in the mid-1990s. Lumber consumers were the...

Midsouth Pulpwood Prices, 1991

Treesearch

Patrick E. Miller

1993-01-01

The average delivered price for a cord of Midsouth roundwood in 1991 was $56.39, an increase of 6.5 percent since 1990. Softwood roundwood averaged $58.24 and hardwoods, $50.48 per standard cord, up 2.8 and 7.9 percent, respectively. Chipped residue prices were $26.52 for softwood and $21.0l for hardwood per green ton. The expenditure for wood fiber in the Midsouth...

Pulpwood Prices in the Southeast, 1981

Treesearch

Cecil C. Hutchins

1982-01-01

Expenditures for pulpwood continued to rise during 1981, but rate of growth was slower than In previous years. Monies expended totaled $1,185.7 million, an 8.3 percent increase over 1980. Softwood roundwood averaged $47.15 and hardwood $35.10 per standard cord, up 7.4 and 6.7 percent. Chip prices were $22.05 for softwood and $15.50 for hardwood per qreenton,up 11.4...

United States pulpwood receipts : softwood and hardwood, roundwood and residues, 1950-1996

Treesearch

C. Denise Ingram; Peter J. Ince; Ryan L. Mehlberg

1999-01-01

This report shows pulpwood receipts at wood pulp mills in the United States for the period 1950 to 1996. It is an update of the General Technical Report FPL1GTR173, bUnited States Pulpwood Receipts: Softwood and Hardwood, Roundwood and Residues, 195011989,c published in 1993. This report continues as a compilation of published and estimated data based on information...

Two-dimensional finite element heat transfer model of softwood. Part III, Effect of moisture content on thermal conductivity

Treesearch

Hongmei Gu; John F. Hunt

2007-01-01

The anisotropy of wood creates a complex problem for solving heat and mass transfer problems that require analyses be based on fundamental material properties of the wood structure. Most heat transfer models for softwood use average thermal properties across either the radial or tangential direction and do not differentiate the effects of cellular alignment or...

Two-dimensional finite element heat transfer model of softwood. Part II, Macrostructural effects

Treesearch

Hongmei Gu; John F. Hunt

2006-01-01

A two-dimensional finite element model was used to study the effects of structural features on transient heat transfer in softwood lumber with various orientations. Transient core temperature was modeled for lumber samples “cut” from various locations within a simulated log. The effects of ring orientation, earlywood to latewood (E/L) ratio, and ring density were...

Pallet Recycling and Material Substitution: How Will Hardwood Markets Be Affected?

Treesearch

Robert J. Bush; Philip A. Araman; Vijay S. Reddy

1997-01-01

An estimated 4.53 billion board feet of solid hardwood and 1.79 billion board feet of solid softwood were used in the production of pallets and containers in 1995. When compared to estimates for 1992, the use of both softwoods and hardwoods has decreased. Use for pallets and containers, as a percentage of total lumber production, also decreased for both materials...

Profile 1999 : softwood sawmills in the United States and Canada

Treesearch

Henry. Spelter; Tim. McKeever

More than 1,200 sawmills produce the bulk of U.S. and Canadian softwood lumber. The maps and tables in this report show the location and size of these mills by State and Province. Analysis of timber inventories in relation to use shows a close correspondence between pricing and use intensity. In some Southern States, the intensity of use is approaching recent growth...

Investigating the use of small-diameter softwood as guardrail posts: static test results

Treesearch

David E. Kretschmann; Ron Faller; Jason Hascall; John Reid; Dean Sicking; John Rohde; Dick Shilts; Tim Nelson

2007-01-01

Round guardrail posts may provide an important value added option for small-diameter thinnings. Such posts require minimum processing and have been shown to have higher strength compared to the equivalent rectangular volume. The resulting value-added product may bring a higher return compared to lumber. The obstacles to immediate utilization of ponderosa pine and...

A review and validation of the IMPLAN model for Pennsylvania's solid hardwood product industries

Treesearch

Bruce E. Lord; Charles H. Strauss

1993-01-01

The IMPLAN model for Pennsylvania was reviewed with respect to the industries processing the state's solid hardwood resources. Several sectors were found to be under represented in the standard sources of industrial activity. Further problems were attributed to the lack of distinction between hardwoods and softwoods in the national model. A further set of changes...

On energy consumption for size-reduction and yields from subsequent enzymatic saccharification of pretreated lodgepole pine

Treesearch

W. Zhu; Junyong Zhu; Roland Gleisner; X.J. Pan

2010-01-01

This study investigated the effects of chemical pretreatment and disk-milling conditions on energy consumption for size-reduction and the efficiency of enzymatic cellulose saccharification of a softwood. Lodgepole pine wood chips produced from thinnings of a 100-year-old unmanaged forest were pretreated by hot-water, dilute-acid, and two SPORL processes (Sulfite...

Use of Biochar to sequester nutrients from dairy manure lagoons

USDA-ARS?s Scientific Manuscript database

We are developing technology to utilize dairy waste as an alternative energy and fertilizer source. The fiber component exiting a GHD™ Plugged Flow anaerobic digester as well as feedstocks from softwood sources were used to produce bio-gas or bio-oil under low temperature pyrolysis, the co-product, ...

Nonlinear Programming Models to Optimize Uneven-Aged Shortleaf Pine Management

Treesearch

Benedict J. Schulte; Joseph Buongiorno

2002-01-01

Nonlinear programming models of uneven-aged shortleaf pine (Pinus echinata Mill.) management were developed to identify sustainable management regimes that optimize soil expectation value (SEV) or annual sawtimber yields. The models recognize three species groups (shortleaf pine and other softwoods, soft hardwoods and hard hardwoods) and 13 2-inch...

The woody biomass resource of Arkansas, 1988

Treesearch

James F. Rosson

1993-01-01

Data from the 1988 Arkansas forest survey were used to derive fresh and dry biomass estimates for all trees, on timberland, greater than 1.0 inch in diameter at breast height (d.b.h). There are 383.2 million fresh tons in softwood species and 939.7 million fresh tons in hardwood species. Most of this biomass is in the stem portion of the trees—85 percent for softwoods...

Potential advantages of curve sawing non-straight hardwood logs

Treesearch

Philip A. Araman

2007-01-01

Curve sawing is not new to the softwood industry. Softwood sawmill managers think about how fast they can push logs through their sawmill to maximize the yield of 1x and 2x lumber. Curve sawing helps mills maximize yield when sawing non-straight logs. Hardwood sawmill managers don’t want to push logs through their sawmills, because they want to maximize lumber value...

Life Cycle Primary Energy and Carbon Analysis of Recovering Softwood Framing Lumber and Hardwood Flooring for Reuse

Treesearch

Richard D. Bergman; Hongmei Gu; Thomas R. Napier; James Salazar; Robert H. Falk

2012-01-01

Recovering wood for reuse in a new house affects energy and greenhouse gas emissions. This paper finds the energy and emissions for recovering softwood framing lumber and hardwood flooring from an old house for installation in a new house. Recovering wood displaces primary production of new wood products and avoids the end-of-life (EOL) burdens for the old house. We...

Pulpwood Prices in the Southeast, 1979

Treesearch

Cecil C. Hutchins

1981-01-01

Expenditures for wood fiber in the Southeast during 1979 were $960.8 million, an increase of 8.7 percent over 1978. Price per standard cord of roundwood pulpwood was $40.65for softwood, a 12.1-percent increase, and $30.40 for hardwood, an increase of 8 percent. Green chip prices per ton averaged $17.15 for softwood and $13.05 for hardwood; they increased 7.9 and 8.8...

The woody biomass resource of Alabama, 1990

Treesearch

James F. Rosson

1993-01-01

Data from the 1990 Alabama forest survey were used to derive fresh and dry biomass estimates for all trees, on timberland, greater than 1.0 inch in diameter at breast height (d.b.h.). there are 579.8 million fresh tons in softwood species and 998.5 million fresh tons in hardwood species. Most of this biomass is in the stem portion of the trees--93 percent for softwoods...

Extraction of cellulose nanofibrils from dry softwood pulp using high shear homogenization.

PubMed

Zhao, Jiangqi; Zhang, Wei; Zhang, Xiaodan; Zhang, Xinxing; Lu, Canhui; Deng, Yulin

2013-09-12

The objective of this study was to extract cellulose nanofibrils (CNFs) from dry softwood pulp through a simple and environmentally friendly physical method of refining pretreatment coupled with high shear homogenization. An optical microscopy (OM) clearly showed the morphological development from the cellulose fibers to CNFs under repeated shear forces. The morphology, structure and properties of the obtained CNFs were comprehensively investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transformed infrared (FTIR) spectra, X-ray diffraction (XRD) and thermogravimetric (TG) analysis. The results indicated that the CNFs had diameters mainly ranged from 16 to 28nm. Compared with the pulp fibers, the CNFs exhibited a slightly higher crystallinity and a lower thermal stability. Moreover, a novel nanopaper with high optical transparency was prepared from the obtained CNFs, and a possible mechanism for the high optical transparency was discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Oregon's forest products industry and timber harvest, 2003.

Treesearch

Jason P. Brandt; Todd A. Morgan; Thale Dillon; Gary J. Lettman; Charles E. Keegan; David L. Azuma

2006-01-01

This Report traces the flow of Oregon’s 2003 timber harvest through the primary timber-processing industry and describes its structure, operations and condition. Pulp and board, lumber, and plywood and veer sectors accounted for 96 percent of total industry sales of $6.7 billion. Oregon’s 2003 timber harvest of just over 4 billion board feet was 95 percent softwood...

Political pressure: An examination of U S Senators actions in restricting Canadian softwood lumber imports

Treesearch

Joseph Godwin; Daowei Zhang

2012-01-01

Over the past 30 years the U.S.–Canadian softwood lumber trade dispute has resulted in three managed trade agreements that have not been voted on in the U.S. Congress. Nevertheless, U.S. Senators have played an important role in shaping the political environment that has nurtured these agreements. In this paper we construct a lumber influence index based on 14 known...

A preliminary comparison of Landsat Thematic Mapper and SPOT-1 HRV multispectral data for estimating coniferous forest volume

NASA Technical Reports Server (NTRS)

Ripple, W. J.; Wang, S.; Isaacson, D. L.; Paine, D. P.

1991-01-01

Digital Landsat Thematic Mapper (TM) and SPOT high-resolution visible (HRV) images of coniferous forest canopies were compared in their relationship to forest wood volume using correlation and regression analyses. Significant inverse relationships were found between softwood volume and the spectral bands from both sensors (P less than 0.01). The highest correlations were between the log of softwood volume and the near-infrared bands.

Lignin modification in the initial phase of softwood kraft pulp delignification with polyoxometalates (POMs)

Treesearch

Biljana Bujanovic; Sally A. Ralph; Richard S. Reiner; Rajai H. Atalla

2007-01-01

Commercial softwood kraft pulp with kappa number 30.5 (KP30.5) was delignified with polyoxometalates (POM, Na5(+2)[SiV1(-0.1)MoW10(+0.1)O40]), and POM-treated kraft pulp of kappa number 23.6 was obtained (KPPOM,23.6). Residual lignin from pulps was isolated by mild acid hydrolysis and characterized by analytical and spectral methods to gain insight into lignin...

Georgia’s forests, 2014

Treesearch

Thomas J. Brandeis; Joe McCollum; Andy Hartsell; Consuelo Brandeis; Anita K. Rose; Sonja N. Oswalt; James T. (JT) Vogt; Humfredo Marcano-Vega

2016-01-01

Georgia’s 24.7 million acres of forest are a diverse mix of hardwood and softwood tree species typical of the South. Hardwood forests account for 53 percent of the forested area versus 45 percent for softwood types, with balance in mixed forests. Georgia’s forest resources are considerable and increasing. The rate at which the State gained forest land acreage from...

The softwood plywood industry in the United States, 1965-82

Treesearch

D. B. McKeever; G. W. Meyer

In 1982, 175 softwood plywood plants operated in the United States with a combined production capacity of nearly 23.1 billion square feet (ft2 ) (3/8-in. basis) per year, 60 percent greater than in 1965. The West was the region with largest capacity in 1982--12.5 billion ft2. The South had 10.5 billion ft2 and the North less than half a billion ft2. Approximately 1.1...

Alkaline peroxide treatment of ECF bleached softwood kraft pulps: part 2. effect of increased fiber charge on refining, wet-end application, and hornification

Treesearch

Zheng Dang; Thomas Elder; Jeffery S. Hsieh; Arthur J. Ragauskas

2007-01-01

The effect of increased fiber charge on refining, cationic starch adsorption, and hornification was examined. Two pulps were investigated: (1) a softwood (SW) kraft pulp (KP) which was bleached elementally chlorine-free (ECF) and sewed as control; and (2) a control pulp treated with alkaline peroxide, which had a higher fiber charge. It was shown that increased fiber...

A new computer approach to mixed feature classification for forestry application

NASA Technical Reports Server (NTRS)

Kan, E. P.

1976-01-01

A computer approach for mapping mixed forest features (i.e., types, classes) from computer classification maps is discussed. Mixed features such as mixed softwood/hardwood stands are treated as admixtures of softwood and hardwood areas. Large-area mixed features are identified and small-area features neglected when the nominal size of a mixed feature can be specified. The computer program merges small isolated areas into surrounding areas by the iterative manipulation of the postprocessing algorithm that eliminates small connected sets. For a forestry application, computer-classified LANDSAT multispectral scanner data of the Sam Houston National Forest were used to demonstrate the proposed approach. The technique was successful in cleaning the salt-and-pepper appearance of multiclass classification maps and in mapping admixtures of softwood areas and hardwood areas. However, the computer-mapped mixed areas matched very poorly with the ground truth because of inadequate resolution and inappropriate definition of mixed features.

WHITE PAPER: DEMONSTRATION OF EQUIVALENCY OF CANE AND SOFTWOOD BASED CELOTEX FOR 9975 PACKAGING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Varble, J

2007-11-20

Cane-based Celotex{trademark} has been used extensively in various DOE packages as a thermal insulator and impact absorber. Cane-based Celotex{trademark} for the 9975 was manufactured by Knight-Celotex Fiberboard at their Marrero Plant in Louisiana. However, Knight-Celotex Fiberboard shut down their Marrero Plant in early 2007 due to impacts from hurricane Katrina and other economic factors. Therefore, cane-based Celotex{trademark} is no longer available for use in the manufacture of new 9975 packages. Knight-Celotex Fiberboard has Celotex{trademark} manufacturing plants in Danville, VA and Sunbury, PA that use softwood and hardwood, respectively, as a raw material in the manufacturing of Celotex{trademark}. The purpose ofmore » this White Paper is to demonstrate that softwood-based Celotex{trademark} from the Knight-Celotex Danville Plant has performance equivalent to cane-based Celotex{trademark} from the Knight-Celotex Marrero Plant for transportation in a 9975 package.« less

Chapter 4:Grading and properties of hardwood structural lumber

Treesearch

David W. Green

2005-01-01

Structural lumber markets have traditionally been dominated by softwood species. Historically, however, hardwood species have been extensively used for certain structural products such as timbers for railway and highway bridges, railway ties, mine timbers, and for pallets and containers. In the 1920s, when uniform procedures were first developed for structural grading...

Optimum fiber distribution in singlewall corrugated fiberboard

Treesearch

Millard W. Johnson; Thomas J. Urbanik; William E. Denniston

1979-01-01

Determining optimum distribution of fiber through rational design of corrugated fiberboard could result in significant reductions in fiber required to meet end-use conditions, with subsequent reductions in price pressure and extension of the softwood timber supply. A theory of thin plates under large deformations is developed that is both kinematically and physically...

Alkaline peroxide treatment of ECF bleached softwood kraft pulps. Part 1. characterizing the effect of alkaline peroxide treatment on carboxyl groups of fibers

Treesearch

Zheng Dang; Thomas Elder; Arthur J. Ragauskas

2007-01-01

The influence of alkaline peroxide treatment has been characterized on elementally chlorine-free (ECF) bleached softwood (SW) kraft pulp. The results indicate that fiber charge increased with an increase in peroxide charge: a maximum fiber charge increment of 16.6% was obtained with 8.0% more peroxide charge on oven-dried (0.d.) pulp at 60.0°C. Two primary bleaching...

Cancer incidence among workers exposed to softwood dust in Lithuania.

PubMed

Smailyte, Giedre

2012-06-01

The aim of this study was to assess cancer incidence in a cohort of woodworkers exposed to softwood dust in a Lithuanian wooden joinery products factory. The study population consisted of 1518 workers (1080 men and 438 women) employed in the factory for at least 1 year between 1947 and 1996 and living in Lithuania on 1 January 1978, when the follow-up for cancer incidence began. The follow-up period for cancer was 1978-2007. Cancer risk was assessed by standardised incidence ratios (SIR) with reference to the national population. Overall cancer incidence was not increased among woodworkers. However, the number of mouth and pharynx cancer cases among male woodworkers was significantly increased compared with expected numbers (SIR 2.19, 95% CI 1.17 to 3.74). A higher risk was found for cancer of the buccal cavity than for pharyngeal cancer (SIRs 2.83 and 1.45, respectively). The SIR for larynx cancer was also elevated (SIR 1.39, 95% CI 0.64 to 2.64) among men, while the number of lung cancer cases was higher than expected only among women (SIR 2.07, 95% CI 00.57 to 5.31). This results of this study support the hypothesis that exposure to softwood dust may increase the risk of oral and pharyngeal cancer. No support was found for an increased risk of other respiratory cancers among workers exposed to softwood dust.

Rheology of lyocell solutions from different cellulosic sources and development of regenerated cellulosic microfibers

NASA Astrophysics Data System (ADS)

Li, Zuopan

2003-10-01

The primary goals of the study were to develop manufactured cellulosic fibers and microfibers from wood pulps as well as from lignocellulosic agricultural by-products and to investigate alternative cellulosic sources as raw materials for lyocell solutions. A protocol was developed for the lyocell preparation from different cellulose sources. The cellulose sources included commercial dissolving pulps, commercial bleached hardwood, unbleached hardwood, bleached softwood, unbleached softwood, bleached thermomechanical pulp, unbleached thermomechanical pulp, bleached recycled newsprint, unbleached recycled newsprint, bagasse and kudzu. The rheological behavior of solutions was characterized. Complex viscosities and effective elongational viscosities were measured and the influences of parameters such as cellulose source, concentration, bleaching, and temperature were studied. One-way ANOVA post hoc tests were carried out to identify which cellulose sources have the potential to produce lyocell solutions having similar complex viscosities to those from commercial dissolving pulps. Lyocell solutions from both bleached and unbleached softwood and hardwood were classified as one homogenous subset that had the lowest complex viscosity. Kudzu solutions had the highest complex viscosity. The results showed the potential to substitute DP 1457 dissolving pulp with unbleached recycled newsprint pulps, to substitute DP 1195 dissolving pulp with bleached and unbleached thermomechanical pulps, to substitute DP 932 dissolving pulp with bleached thermomechanical pulps or bleached recycled newsprint pulps, to substitute DP 670 dissolving pulp with bagasse. Lyocell fibers were produced from selected solutions and were treated to produce microfibers. Water, sulfuric acid solutions and sodium hydroxide solutions were used. The treatment of lyocell fibers in 17.5% NaOH solutions for five minutes at 20°C successfully broke the fibers into fibrils along fiber axis. The diameters of the fibrils were generally in the range of 2 to 6 mum, and there were also finer fibrils with diameters less than 1 mum.

Closed-mill delignification by design using polyoxometalates

Treesearch

C. J. Houtman; R. S. Reiner; S. E. Reichel; M. J. Birchmeier; C. E. Sullivan; L. A. Weinstock; R. H. Atalla

1999-01-01

Polyoxometalates (POMs) are a class of delignification agents that promise to provide the basis for a new closed-mill bleaching technology. The results presented here are based on the use of Na6SiV2W10O40, which is effective in reducing the Kappa number of softwood Kraft pulp from 30 to below 10 with minimal loss in viscosity. A critical part of a viable POM process is...

Policy impacts estimates are sensitive to data selection in empirical analysis: evidence from the United States – Canada softwood lumber trade dispute

Treesearch

Daowei Zhang; Rajan Parajuli

2016-01-01

In this paper, we use the U.S. softwood lumber import demand model as a case study to show that the effects of past trade policies are sensitive to the data sample used in empirical analyses.  We conclude that, to be consistent with the purpose of analysis of policy and to ensure all else being equal, policy impacts can only be judged by using data up to the time when...

Conundrums regarding 5–O–4- linkages in softwood MWLs

Treesearch

Sally Ralph

2005-01-01

Recent investigation of [alpha]-hydroxy 5–O–4-lignin model compounds by NMR indicates that the short-range 13C-1H correlations for the ring 2- and 6- carbons should be distinct in HSQC NMR spectra of softwood MWLs and possibly in guaiacyl-type synthetic lignins (DHPs). The levels of 5–O–4-type linkages have been reported to be on the order of 17% of C9 units for MWLs....

Forty years of spruce–fir stand development following herbicide application and precommercial thinning in central Maine, USA

Treesearch

Matthew G. Olson; Robert G. Wagner; John C. Brissette

2012-01-01

We examined the development of a 33-year experiment in spruce–fir stands that received nine herbicide treatments (applied aerially in 1977), with and without precommercial thinning (PCT) (applied in 1986). We tested two commonly held assumptions about the long-term effects of herbicide and PCT in mixedwood stands managed for softwoods: (i) herbicide release produces...

Bio-oil production of softwood and hardwood forest industry residues through fast and intermediate pyrolysis and its chromatographic characterization.

PubMed

Torri, Isadora Dalla Vecchia; Paasikallio, Ville; Faccini, Candice Schmitt; Huff, Rafael; Caramão, Elina Bastos; Sacon, Vera; Oasmaa, Anja; Zini, Claudia Alcaraz

2016-01-01

Bio-oils were produced through intermediate (IP) and fast pyrolysis (FP), using Eucalyptus sp. (hardwood) and Picea abies (softwood), wood wastes produced in large scale in Pulp and Paper industries. Characterization of these bio-oils was made using GC/qMS and GC×GC/TOFMS. The use of GC×GC provided a broader characterization of bio-oils and it allowed tracing potential markers of hardwood bio-oil, such as dimethoxy-phenols, which might co-elute in 1D-GC. Catalytic FP increased the percentage of aromatic hydrocarbons in P. abies bio-oil, indicating its potential for fuel production. However, the presence of polyaromatic hydrocarbons (PAH) draws attention to the need of a proper management of pyrolysis process in order to avoid the production of toxic compounds and also to the importance of GC×GC/TOFMS use to avoid co-elutions and consequent inaccuracies related to identification and quantification associated with GC/qMS. Ketones and phenols were the major bio-oil compounds and they might be applied to polymer production. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Multinomial Logit Approach to Estimating Regional Inventories by Product Class

Treesearch

Lawrence Teeter; Xiaoping Zhou

1998-01-01

Current timber inventory projections generally lack information on inventory by product classes. Most models available for inventory projection and linked to supply analyses are limited to projecting aggregate softwood and hardwood. The objective of this research is to develop a methodology to distribute the volume on each FIA survey plot to product classes and...

Louisiana forest industries: 1946-1971

Treesearch

P. Irland

1973-01-01

Louisiana is a prominent supplier of forest products to the nation. In 1971, it was the third leading state in output of softwood plywood, third in pulp production, and third in paper and paperboard. Louisiana ranked tenth in production of hardwood lumber, and thirteenth in all lumber. This article describes development of forest industries in the state since World War...

Comparative study for hardwood and softwood forest biomass: chemical characterization, combustion phases and gas and particulate matter emissions.

PubMed

Amaral, Simone Simões; de Carvalho, João Andrade; Costa, Maria Angélica Martins; Soares Neto, Turíbio Gomes; Dellani, Rafael; Leite, Luiz Henrique Scavacini

2014-07-01

Two different types of typical Brazilian forest biomass were burned in the laboratory in order to compare their combustion characteristics and pollutant emissions. Approximately 2 kg of Amazon biomass (hardwood) and 2 kg of Araucaria biomass (softwood) were burned. Gaseous emissions of CO2, CO, and NOx and particulate matter smaller than 2.5 μm (PM2.5) were evaluated in the flaming and smoldering combustion phases. Temperature, burn rate, modified combustion efficiency, emissions factor, and particle diameter and concentration were studied. A continuous analyzer was used to quantify gas concentrations. A DataRam4 and a Cascade Impactor were used to sample PM2.5. Araucaria biomass (softwood) had a lignin content of 34.9%, higher than the 23.3% of the Amazon biomass (hardwood). CO2 and CO emissions factors seem to be influenced by lignin content. Maximum concentrations of CO2, NOx and PM2.5 were observed in the flaming phase. Copyright © 2014 Elsevier Ltd. All rights reserved.

[Effect of biological pretreatment with Trametes vesicolor on the enzymatic hydrolysis of softwood and hardwood].

PubMed

Yu, Hongbo; Zhang, Xiaoyu

2009-07-01

We evaluated the effect of biological pretreatment with white rot fungus Trametes vesicolor on the enzymatic hydrolysis of two wood species, Chinese willow (Salix babylonica, hardwood) and China-fir (Cunninghamia lanceolata, softwood). The result indicated that the pretreated woods showed significant increases in the final conversion ratios of enzymatic hydrolysis (4.78-fold for hardwood and 4.02-fold for softwood). In order to understand the role of biological pretreatment we investigated the enzyme-substrate interactions. Biological pretreatment enhanced the substrate accessibility to cellulase but not always correlated with the initial conversion rate. However, the change of the conversion rate decreased dramatically with increased desorption values after biological pretreatment. Thus, the biological pretreatment slowed down the declines in conversion rates during enzymatic hydrolysis by reducing the irreversible adsorption of cellulase and then improved the enzymatic hydrolysis. Moreover, the decreases of the irreversible adsorption may be attributed to the partial lignin degradation and alteration in lignin structure after biological pretreatment.

The effect of biological pretreatment with the selective white-rot fungus Echinodontium taxodii on enzymatic hydrolysis of softwoods and hardwoods.

PubMed

Yu, Hongbo; Guo, Guoning; Zhang, Xiaoyu; Yan, Keliang; Xu, Chunyan

2009-11-01

Selective white-rot fungi have shown potential for lignocellulose pretreatment. In the study, a new fungal isolate, Echinodontium taxodii 2538, was used in biological pretreatment to enhance the enzymatic hydrolysis of two native woods: Chinese willow (hardwood) and China-fir (softwood). E. taxodii preferentially degraded the lignin during the pretreatment, and the pretreated woods showed significant increases in enzymatic hydrolysis ratios (4.7-fold for hardwood and 6.3-fold for softwood). To better understand effects of biological pretreatment on enzymatic hydrolysis, enzyme-substrate interactions were investigated. It was observed that E. taxodii enhanced initial adsorption of cellulase but which did not always translate to high initial hydrolysis rate. However, the rate of change in hydrolysis rate declined dramatically with decreasing irreversible adsorption of cellulase. Thus, the enhancement of enzymatic hydrolysis was attributed to the decline of irreversible adsorption which may result from partial lignin degradation and alteration in lignin structure after biological pretreatment.

A pilot study of personal exposure to respirable and inhalable dust during the sanding and sawing of medium density fibreboard (MDF) and soft wood.

PubMed

Hursthouse, Andrew; Allan, Fraser; Rowley, Louise; Smith, Frank

2004-08-01

A pilot study of production of respirable and inhalable dusts from sawing and sanding medium density fibreboard (MDF) and softwood in a typical cabinet-making workshop produced high but variable exposure levels at the bench and operator position. Exposure levels for the total inhalable fraction (approximately <100 microm) were 6.9-91 mg m(-3) for MDF and 2.5-45 mg m(-3) for softwood. For the respirable fraction (< 10 microm) levels were 0.4-13 mg m(-3) for MDF and 0.4-2.9 mg m(-3) for softwood. These results show significant dust loading is produced in the coarser fraction and that the material used has a significant impact on levels produced. It suggests that fuller evaluation of operator influence of fine dust production is needed and may question the common application of a single inhalable exposure standard for wood dust to all wood working scenarios.

DEMONSTRATION OF EQUIVALENCY OF CANE AND SOFTWOOD BASED CELOTEX FOR MODEL 9975 SHIPPING PACKAGES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watkins, R; Jason Varble, J

2008-05-27

Cane-based Celotex{trademark} has been used extensively in various Department of Energy (DOE) packages as a thermal insulator and impact absorber. Cane-based Celotex{trademark} fiberboard was only manufactured by Knight-Celotex Fiberboard at their Marrero Plant in Louisiana. However, Knight-Celotex Fiberboard shut down their Marrero Plant in early 2007 due to impacts from hurricane Katrina and other economic factors. Therefore, cane-based Celotex{trademark} fiberboard is no longer available for use in the manufacture of new shipping packages requiring the material as a component. Current consolidation plans for the DOE Complex require the procurement of several thousand new Model 9975 shipping packages requiring cane-based Celotex{trademark}more » fiberboard. Therefore, an alternative to cane-based Celotex{trademark} fiberboard is needed. Knight-Celotex currently manufactures Celotex{trademark} fiberboard from other cellulosic materials, such as hardwood and softwood. A review of the relevant literature has shown that softwood-based Celotex{trademark} meets all parameters important to the Model 9975 shipping package.« less

The Effect of Plant Source on the Structural Properties of Lignin-based Polyurethane Blends

NASA Astrophysics Data System (ADS)

Lang, Jason; Dadmun, Mark

The development of polyurethane materials based on incorporating lignin from a variety of plant sources (softwood, hardwood, and non-wood) were synthesized. Further experiments study the physical properties of the resulting lignin-based polyurethane as a function of the lignin structure, which varies with plant source. Here, we report the effect that internal crosslinking of the lignin structure has on the modulus, hardness, glass transition temperature, and thermal decomposition of the synthesized lignin-based polyurethane composites. The lignins used in this work were a softwood kraft lignin, hardwood lignosulfonate, and a wheat straw soda lignin. The lignin, acting as a polyol and the hardblock segment, reacts with TDI-endcapped PPG (2,300 MN) as the rubbery softblock component to produce lignin-based polyurethanes with varying lignin content (10, 20, 30, 40, 50, and 60 wt%). Results show that the wheat straw lignin provides the superior mechanical properties and thermal resistance. These properties are correlated to the two-phase morphology of the resultant polyurethane.

Manufacture and Properties of Glucomannans and Glucomannooligosaccharides Derived from Konjac and Other Sources.

PubMed

Gómez, Belén; Míguez, Beatriz; Yáñez, Remedios; Alonso, José L

2017-03-15

Glucomannans (GM) are polymers that can be found in natural resources, such as tubers, bulbs, roots, and both hard- and softwoods. In fact, mannan-based polysaccharides represent the largest hemicellulose fraction in softwoods. In addition to their structural functions and their role as energy reserve, they have been assessed for their healthy applications, including their role as new source of prebiotics. This paper summarizes the scientific literature regarding the manufacture and functional properties of GM and their hydrolysis products with a special focus on their prebiotic activity.

A preliminary comparison of Landsat Thematic Mapper and SPOT-1 HRV multispectral data for estimating coniferous forest volume

NASA Technical Reports Server (NTRS)

Ripple, William J.; Wang, S.; Isaacson, Dennis L.; Paine, D. P.

1995-01-01

Digital Landsat Thematic Mapper (TM) and Satellite Probatoire d'Observation de la Terre (SPOT) High Resolution Visible (HRV) images of coniferous forest canopies were compared in their relationship to forest wood volume using correlation and regression analyses. Significant inverse relationships were found between softwood volume and the spectral bands from both sensors (P less than 0.01). The highest correlations were between the log of softwood volume and the near-infrared bands (HRV band 3, r = -0.89; TM band 4, r = -0.83).

Estimation of Cellulose Crystallinity of Lignocelluloses Using Near-IR FT-Raman Spectroscopy and Comparison of the Raman and Segal-WAXS Methods

Treesearch

Umesh P. Agarwal; Richard R. Reiner; Sally A. Ralph

2013-01-01

Of the recently developed univariate and multivariate near-IR FT-Raman methods for estimating cellulose crystallinity, the former method was applied to a variety of lignocelluloses: softwoods, hardwoods, wood pulps, and agricultural residues/fibers. The effect of autofluorescence on the crystallinity estimation was minimized by solvent extraction or chemical treatment...

Managing hardwood-softwood mixtures for future forests in eastern North America: assessing suitability to projected climate change

Treesearch

John M. Kabrick; Kenneth L. Clark; Anthony W. D' Amato; Daniel C. Dey; Laura S. Kenefic; Christel C. Kern; Benjamin O. Knapp; David A. MacLean; Patricia Raymond; Justin D. Waskiewicz

2017-01-01

Despite growing interest in management strategies for climate change adaptation, there are few methods for assessing the ability of stands to endure or adapt to projected future climates. We developed a means for assigning climate "Compatibility" and "Adaptability" scores to stands for assessing the suitability of tree species for projected climate...

A Spectroscopic study on the fuel value of softwoods in relation to chemical composition

Treesearch

Chi-Leung So; Thomas L. Eberhardt; Les Groom; Todd F. Shupe

2012-01-01

The recent focus on bioenergy has led to interest in developing alternative technologies for assessing the fuel value of available biomass resources. In this study, both near- and mid-infrared spectroscopic datawere used to predict fuel value in relation to extractives and lignin contents for longleaf pine wood. Samples were analyzed both before and after extraction....

Cellulose Nanofibers from Softwood, Hardwood, and Tunicate: Preparation-Structure-Film Performance Interrelation.

PubMed

Zhao, Yadong; Moser, Carl; Lindström, Mikael E; Henriksson, Gunnar; Li, Jiebing

2017-04-19

This work reveals the structural variations of cellulose nanofibers (CNF) prepared from different cellulose sources, including softwood (Picea abies), hardwood (Eucalyptus grandis × E. urophylla), and tunicate (Ciona intestinalis), using different preparation processes and their correlations to the formation and performance of the films prepared from the CNF. Here, the CNF are prepared from wood chemical pulps and tunicate isolated cellulose by an identical homogenization treatment subsequent to either an enzymatic hydrolysis or a 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO)-mediated oxidation. They show a large structural diversity in terms of chemical, morphological, and crystalline structure. Among others, the tunicate CNF consist of purer cellulose and have a degree of polymerization higher than that of wood CNF. Introduction of surface charges via the TEMPO-mediated oxidation is found to have significant impacts on the structure, morphology, optical, mechanical, thermal, and hydrophobic properties of the prepared films. For example, the film density is closely related to the charge density of the used CNF, and the tensile stress of the films is correlated to the crystallinity index of the CNF. In turn, the CNF structure is determined by the cellulose sources and the preparation processes. This study provides useful information and knowledge for understanding the importance of the raw material for the quality of CNF for various types of applications.

Preferences of group-housed female mice regarding structure of softwood bedding.

PubMed

Kirchner, J; Hackbarth, H; Stelzer, H D; Tsai, P-P

2012-04-01

Bedding influences various parameters in the housing of laboratory mice, such as health, physiology and behaviour (often considered as being integral parts of welfare). Notwithstanding existent studies about bedding preferences of individually tested mice, data about group-housed mice are still lacking. The aim of this study was to find out the structure preference for softwood bedding of group-housed mice. One hundred and eight 8-week-old female mice (C57BL6/JOlaHsd and BALB/cOlaHsd) were housed in groups of three and were given one-week free access to two different bedding structures at a time. In three test combinations, softwood shaving bedding was tested versus softwood chip bedding products of three different particle sizes (fine/medium/coarse-grained). The preference test was performed in a DoubleCage system composed of two Makrolon type IIL cages, connected by a perspex tunnel. This validated system was able to detect the crossings of each individual animal with correct crossing time and direction. On the basis of these data, dwelling times on the particular bedding structures were statistically analysed as a parameter for bedding preferences. In all three test combinations, a highly significant shaving preference was detected. On average, mice spent 70% of their dwelling time on the shavings. This preference was more explicit during the light period and in C57BL/6J mice. The relative ranking of the bedding structures was: shavings > coarse-grained chips > medium chips = fine chips. By means of these results, a shaving structure as bedding can be recommended for laboratory mice, whereas fine chip structures should be avoided.

UV-Vis as quantification tool for solubilized lignin following a single-shot steam process.

PubMed

Lee, Roland A; Bédard, Charles; Berberi, Véronique; Beauchet, Romain; Lavoie, Jean-Michel

2013-09-01

In this short communication, UV/Vis was used as an analytical tool for the quantification of lignin concentrations in aqueous mediums. A significant correlation was determined between absorbance and concentration of lignin in solution. For this study, lignin was produced from different types of biomasses (willow, aspen, softwood, canary grass and hemp) using steam processes. Quantification was performed at 212, 225, 237, 270, 280 and 287 nm. UV-Vis quantification of lignin was found suitable for different types of biomass making this a timesaving analytical system that could lead to uses as Process Analytical Tool (PAT) in biorefineries utilizing steam processes or comparable approaches. Copyright © 2013 Elsevier Ltd. All rights reserved.

Kraft lignin chain extension chemistry via propargylation, oxidative coupling, and Claisen rearrangement.

PubMed

Sen, Sanghamitra; Sadeghifar, Hasan; Argyropoulos, Dimitris S

2013-10-14

Despite its aromatic and polymeric nature, the heterogeneous, stochastic, and reactive characteristics of softwood kraft lignin seriously limit its potential for thermoplastic applications. Our continuing efforts toward creating thermoplastic lignin polymers are now focused at exploring propargylation derivatization chemistry and its potential as a versatile novel route for the eventual utilization of technical lignins with a significant amount of molecular control. To do this, we initially report the systematic propargylation of softwood kraft lignin. The synthesized derivatives were extensively characterized with thermal methods (DSC, TGA), (1)H, (13)C, and quantitative (31)P NMR and IR spectroscopies. Further on, we explore the versatile nature of the lignin pendant propargyl groups by demonstrating two distinct chain extension chemistries; the solution-based, copper-mediated, oxidative coupling and the thermally induced, solid-state, Claissen rearrangement polymerization chemistries. Overall, we show that it is possible to modulate the reactivity of softwood kraft lignin via a combination of methylation and chain extension providing a rational means for the creation of higher molecular weight polymers with the potential for thermoplastic materials and carbon fibers with the desired control of structure-property relations.

Effects of live crown on vertical patterns of wood density and growth in Douglas-fir.

Treesearch

Barbara L. Gartner; Eric M. North; G.R. Johnson; Ryan Singleton

2002-01-01

It would be valuable economically to know what are the biological triggers for formation of mature wood (currently of high value) and (or) what maintains production of juvenile wood (currently of low value), to develop silvicultural regimes that control the relative production of the two types of wood. Foresters commonly assume the bole of softwoods produces juvenile...

Small-scale lumber drying using wood gasification as a heat source

Treesearch

Richard Bergman

2005-01-01

Small, rural forested communities have the economic need to develop a wood products industry to replace the loss of large sawmills and maintain forest health. The main objective of this study was to explore the potential of using producer (wood) gas to fire a hot water boiler for a small dry kiln capable of drying both softwood and hardwood lumber. A BioMax wood...

Estimation and application of a growth and yield model for uneven-aged mixed conifer stands in California.

Treesearch

Jingjing Liang; J. Buongiorno; R.A. Monserud

2005-01-01

A growth model for uneven-aged mixed-conifer stands in California was developed with data from 205 permanent plots. The model predicts the number of softwood and hardwood trees in nineteen diameter classes, based on equations for diameter growth rates, mortality arid recruitment. The model gave unbiased predictions of the expected number of trees by diameter class and...

Nationwide forestry applications program. Ten-Ecosystem Study (TES) site 8, Grays Harbor County, Washington

NASA Technical Reports Server (NTRS)

Prill, J. C. (Principal Investigator)

1979-01-01

The author has identified the following significant results. Level 2 forest features (softwood, hardwood, clear-cut, and water) can be classified with an overall accuracy of 71.6 percent plus or minus 6.7 percent at the 90 percent confidence level for the particular data and conditions existing at the time of the study. Signatures derived from training fields taken from only 10 percent of the site are not sufficient to adequately classify the site. The level 3 softwood age group classification appears reasonable, although no statistical evaluation was performed.

Evaluating warp of 2 by 4s sawn from panels produced through green gluing dimension lumber from small ponderosa pine logs

Treesearch

Richard Bergman; William T. Simpson; Chris Turk

2010-01-01

Overstocked small-diameter softwood timber in western US forests has created a serious forest health and fire hazard, and the costs of removing this material are high. One way to lower costs is to reduce loss because of warp on lumber sawn from these small logs. Using a green-gluing process, standard 38 by 89-mm (nominal 2 by 4-in.) pieces (2 by 4s) ripped from pressed...

Progressive structural changes of Avicel, bleached softwood, and bacterial cellulose during enzymatic hydrolysis

PubMed Central

Kafle, Kabindra; Shin, Heenae; Lee, Christopher M.; Park, Sunkyu; Kim, Seong H.

2015-01-01

A comprehensive picture of structural changes of cellulosic biomass during enzymatic hydrolysis is essential for a better understanding of enzymatic actions and development of more efficient enzymes. In this study, a suite of analytical techniques including sum frequency generation (SFG) spectroscopy, infrared (IR) spectroscopy, x-ray diffraction (XRD), and x-ray photoelectron spectroscopy (XPS) were employed for lignin-free model biomass samples—Avicel, bleached softwood, and bacterial cellulose—to find correlations between the decrease in hydrolysis rate over time and the structural or chemical changes of biomass during the hydrolysis reaction. The results showed that the decrease in hydrolysis rate over time appears to correlate with the irreversible deposition of non-cellulosic species (either reaction side products or denatured enzymes, or both) on the cellulosic substrate surface. The crystallinity, degree of polymerization, and meso-scale packing of cellulose do not seem to positively correlate with the decrease in hydrolysis rate observed for all three substrates tested in this study. It was also found that the cellulose Iα component of the bacterial cellulose is preferentially hydrolyzed by the enzyme than the cellulose Iβ component. PMID:26463274

Comparative genomics of the white-rot fungi, Phanerochaete carnosa and P. chrysosporium, to elucidate the genetic basis of the distinct wood types they colonize

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suzuki, Hitoshi; MacDonald, Jacqueline; Syed, Khajamohiddin

Background Softwood is the predominant form of land plant biomass in the Northern hemisphere, and is among the most recalcitrant biomass resources to bioprocess technologies. The white rot fungus, Phanerochaete carnosa, has been isolated almost exclusively from softwoods, while most other known white-rot species, including Phanerochaete chrysosporium, were mainly isolated from hardwoods. Accordingly, it is anticipated that P. carnosa encodes a distinct set of enzymes and proteins that promote softwood decomposition. To elucidate the genetic basis of softwood bioconversion by a white-rot fungus, the present study reports the P. carnosa genome sequence and its comparative analysis with the previously reportedmore » P. chrysosporium genome. Results P. carnosa encodes a complete set of lignocellulose-active enzymes. Comparative genomic analysis revealed that P. carnosa is enriched with genes encoding manganese peroxidase, and that the most divergent glycoside hydrolase families were predicted to encode hemicellulases and glycoprotein degrading enzymes. Most remarkably, P. carnosa possesses one of the largest P450 contingents (266 P450s) among the sequenced and annotated wood-rotting basidiomycetes, nearly double that of P. chrysosporium. Along with metabolic pathway modeling, comparative growth studies on model compounds and chemical analyses of decomposed wood components showed greater tolerance of P. carnosa to various substrates including coniferous heartwood. Conclusions The P. carnosa genome is enriched with genes that encode P450 monooxygenases that can participate in extractives degradation, and manganese peroxidases involved in lignin degradation. The significant expansion of P450s in P. carnosa, along with differences in carbohydrate- and lignin-degrading enzymes, could be correlated to the utilization of heartwood and sapwood preparations from both coniferous and hardwood species.« less

Comparative genomics of the white-rot fungi, Phanerochaete carnosa and P. chrysosporium, to elucidate the genetic basis of the distinct wood types they colonize

PubMed Central

2012-01-01

Background Softwood is the predominant form of land plant biomass in the Northern hemisphere, and is among the most recalcitrant biomass resources to bioprocess technologies. The white rot fungus, Phanerochaete carnosa, has been isolated almost exclusively from softwoods, while most other known white-rot species, including Phanerochaete chrysosporium, were mainly isolated from hardwoods. Accordingly, it is anticipated that P. carnosa encodes a distinct set of enzymes and proteins that promote softwood decomposition. To elucidate the genetic basis of softwood bioconversion by a white-rot fungus, the present study reports the P. carnosa genome sequence and its comparative analysis with the previously reported P. chrysosporium genome. Results P. carnosa encodes a complete set of lignocellulose-active enzymes. Comparative genomic analysis revealed that P. carnosa is enriched with genes encoding manganese peroxidase, and that the most divergent glycoside hydrolase families were predicted to encode hemicellulases and glycoprotein degrading enzymes. Most remarkably, P. carnosa possesses one of the largest P450 contingents (266 P450s) among the sequenced and annotated wood-rotting basidiomycetes, nearly double that of P. chrysosporium. Along with metabolic pathway modeling, comparative growth studies on model compounds and chemical analyses of decomposed wood components showed greater tolerance of P. carnosa to various substrates including coniferous heartwood. Conclusions The P. carnosa genome is enriched with genes that encode P450 monooxygenases that can participate in extractives degradation, and manganese peroxidases involved in lignin degradation. The significant expansion of P450s in P. carnosa, along with differences in carbohydrate- and lignin-degrading enzymes, could be correlated to the utilization of heartwood and sapwood preparations from both coniferous and hardwood species. PMID:22937793

Developing Inventory Projection Models Using Empirical Net Forest Growth and Growing-Stock Density Relationships Across U.S. Regions and Species Group

Treesearch

Prakash Nepal; Peter J. Ince; Kenneth E. Skog; Sun J. Chang

2012-01-01

This paper describes a set of empirical net forest growth models based on forest growing-stock density relationships for three U.S. regions (North, South, and West) and two species groups (softwoods and hardwoods) at the regional aggregate level. The growth models accurately predict historical U.S. timber inventory trends when we incorporate historical timber harvests...

Elementary software for the hand lens identification of some common iranian woods

Treesearch

Vahidreza Safdari; Margaret S. Devall

2009-01-01

A computer program, “Hyrcania”, has been developed for identifying some common woods (26 hardwoods and 6 softwoods) from the Hyrcanian forest type of Iran. The program has been written in JavaScript and is usable with computers as well as mobile phones. The databases use anatomical characteristics (visible with a hand lens) and wood colour, and can be searched in...

Dynamic-mechanical and thermomechanical properties of cellulose nanofiber/polyester resin composites.

PubMed

Lavoratti, Alessandra; Scienza, Lisete Cristine; Zattera, Ademir José

2016-01-20

Composites of unsaturated polyester resin (UPR) and cellulose nanofibers (CNFs) obtained from dry cellulose waste of softwood (Pinus sp.) and hardwood (Eucalyptus sp.) were developed. The fiber properties and the influence of the CNFs in the dynamic-mechanical and thermomechanical properties of the composites were evaluated. CNFs with a diameter of 70-90 nm were obtained. Eucalyptus sp. has higher α-cellulose content than Pinus sp. fibers. The crystallinity of the cellulose pulps decreased after grinding. However, high values were still obtained. The chemical composition of the fibers was not significantly altered by the grinding process. Eucalyptus sp. CNF composites had water absorption close to the neat resin at 1 wt% filler. The dynamic-mechanical properties of Eucalyptus sp. CNFs were slightly increased and the thermal stability was improved. Copyright © 2015 Elsevier Ltd. All rights reserved.

Estimated Softwood Volume Available for Wood Chipmills or other Low Grade Uses.

EPA Pesticide Factsheets

The potential of wood chip mills to influence the distribution of harvests and the dynamics of wood fiber utilization has become an issue of concern. Where wood chip mills are active in a timber market, they may increase the utilization of wood fiber derived from a given harvest; change the pattern and distribution of harvests on the landscape; and reduce production costs of fiber supply, thus increasing overall quantity supplied in a price-taking market. Wood chip mills have proliferated in the South in recent decades. This data layer was created to address the following question: If the Mid-Atlantic region behaves as the South, which areas are relatively more attractive as sources of low grade softwood fiber, and therefore relatively more vulnerable to any negative stresses associated with wood chip harvests? The data layer simulates annual softwood wood chip volume (in tons) available to supply chip mills or other low grade uses, if timber supply in the Mid-Atlantic mirrors trends for the South. More information about these resources, including the variables used in this study, may be found here: https://edg.epa.gov/data/Public/ORD/NERL/ReVA/ReVA_Data.zip.

Cross-laminated timber made of Hungarian raw materials

NASA Astrophysics Data System (ADS)

Marko, G.; Bejo, L.; Takats, P.

2016-04-01

Cross-laminated timber (CLT), generally made out of softwood, enjoys increasing popularity throughout Europe. This material offers a versatile, eco-friendly technology to create strong, lightweight and energy-efficient buildings. Unfortunately, the sites and climatic conditions in Hungary are not suitable for growing high-quality coniferous trees. Transporting raw materials from other countries (sometimes thousands of kilometres away) negates the environmental advantages of wood-based construction. Local options are definitely preferable from an ecological aspect. Poplar wood (populus spp.) is of great economic importance in Hungary. There are several relatively high density, high strength varieties growing in large quantities in Hungary, that may be used as alternatives to softwood, with comparable properties. There is an increasing interest in using poplar as a construction material, especially in regions were there is a shortage of traditional construction timber. This paper presents the results of a preliminary investigation to create CLT using poplar lumber. Laboratory-scale CLT specimens were created in a hot press, and tested for their loadbearing capacity. The MOR values of poplar CLT are comparable to, albeit somewhat lowerthan those of softwood CLT. Further investigations are required to establish the economic viability and technological conditions for the commercial production of poplar CLT.

Effect of lignin chemistry on the enzymatic hydrolysis of woody biomass.

PubMed

Yu, Zhiying; Gwak, Ki-Seob; Treasure, Trevor; Jameel, Hasan; Chang, Hou-min; Park, Sunkyu

2014-07-01

The impact of lignin-derived inhibition on enzymatic hydrolysis is investigated by using lignins isolated from untreated woods and pretreated wood pulps. A new method, biomass reconstruction, for which isolated lignins are precipitated onto bleached pulps to mimic lignocellulosic biomass, is introduced, for the first time, to decouple the lignin distribution issue from lignin chemistry. Isolated lignins are physically mixed and reconstructed with bleached pulps. Lignins obtained from pretreated woods adsorb two to six times more cellulase than lignins obtained from untreated woods. The higher adsorption of enzymes on lignin correlates with decreased carbohydrate conversion in enzymatic hydrolysis. In addition, the reconstructed softwood substrate has a lower carbohydrate conversion than the reconstructed hardwood substrate. The degree of condensation of lignin increases significantly after pretreatment, especially with softwood lignins. In this study, the degree of condensation of lignin (0.02 to 0.64) and total OH groups in lignin (1.7 to 1.1) have a critical impact on cellulase adsorption (9 to 70%) and enzymatic hydrolysis (83.2 to 58.2%); this may provide insights into the more recalcitrant nature of softwood substrates. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Toxicity of pyrolysis gases from wood

NASA Technical Reports Server (NTRS)

Hilado, C. J.; Huttlinger, N. V.; Oneill, B. A.; Kourtides, D. A.; Parker, J. A.

1977-01-01

The toxicity of the pyrolysis gases from nine wood samples was investigated. The samples of hardwoods were aspen poplar, beech, yellow birch, and red oak. The samples of softwoods were western red cedar, Douglas fir, western hemlock, eastern white pine, and southern yellow pine. There was no significant difference between the wood samples under rising temperature conditions, which are intended to simulate a developing fire, or under fixed temperature conditions, which are intended to simulate a fully developed fire. This test method is used to determine whether a material is significantly more toxic than wood under the preflashover conditions of a developing fire.

Coniferous forest classification and inventory using Landsat and digital terrain data

NASA Technical Reports Server (NTRS)

Franklin, J.; Logan, T. L.; Woodcock, C. E.; Strahler, A. H.

1986-01-01

Machine-processing techniques were used in a Forest Classification and Inventory System (FOCIS) procedure to extract and process tonal, textural, and terrain information from registered Landsat multispectral and digital terrain data. Using FOCIS as a basis for stratified sampling, the softwood timber volumes of the Klamath National Forest and Eldorado National Forest were estimated within standard errors of 4.8 and 4.0 percent, respectively. The accuracy of these large-area inventories is comparable to the accuracy yielded by use of conventional timber inventory methods, but, because of automation, the FOCIS inventories are more rapid (9-12 months compared to 2-3 years for conventional manual photointerpretation, map compilation and drafting, field sampling, and data processing) and are less costly.

Hygromorphic characterization of softwood under high resolution X-ray tomography for hygrothermal simulation

NASA Astrophysics Data System (ADS)

El Hachem, Chady; Abahri, Kamilia; Vicente, Jérôme; Bennacer, Rachid; Belarbi, Rafik

2018-03-01

Because of their complex hygromorphic shape, microstructural study of wooden materials behavior has recently been the point of interest of researchers. The purpose of this study, in a first part, consists in characterizing by high resolution X-ray tomography the microstructural properties of spruce wood. In a second part, the subresulting geometrical parameters will be incorporated when evaluating the wooden hygrothermal transfers behavior. To do so, volume reconstructions of 3 Dimensional images (3D), obtained with a voxel size of 0.5 μm were achieved. The post-treatment of the corresponding volumes has given access to averages and standard deviations of lumens' diameters and cell walls' thicknesses. These results were performed for both early wood and latewood. Further, a segmentation approach for individualizing wood lumens was developed, which presents an important challenge in understanding localized physical properties. In this context, 3D heat and mass transfers within the real reconstructed geometries took place in order to highlight the effect of wood directions on the equivalent conductivity and moisture diffusion coefficients. Results confirm that the softwood cellular structure has a critical impact on the reliability of the studied physical parameters.

Progressive structural changes of Avicel, bleached softwood, and bacterial cellulose during enzymatic hydrolysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kafle, Kabindra; Shin, Heenae; Lee, Christopher M.

A comprehensive picture of structural changes of cellulosic biomass during enzymatic hydrolysis is essential for a better understanding of enzymatic actions and development of more efficient enzymes. In this study, a suite of analytical techniques including sum frequency generation (SFG) spectroscopy, infrared (IR) spectroscopy, x-ray diffraction (XRD), and x-ray photoelectron spectroscopy (XPS) were employed for lignin-free model biomass samples—Avicel, bleached softwood, and bacterial cellulose—to find correlations between the decrease in hydrolysis rate over time and the structural or chemical changes of biomass during the hydrolysis reaction. The results showed that the decrease in hydrolysis rate over time appears to correlatemore » with the irreversible deposition of non-cellulosic species (either reaction side products or denatured enzymes, or both) on the cellulosic substrate surface. The crystallinity, degree of polymerization, and meso-scale packing of cellulose do not seem to positively correlate with the decrease in hydrolysis rate observed for all three substrates tested in this study. It was also found that the cellulose Iα component of the bacterial cellulose is preferentially hydrolyzed by the enzyme than the cellulose Iβ component.« less

Progressive structural changes of Avicel, bleached softwood, and bacterial cellulose during enzymatic hydrolysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kafle, Kabindra; Shin, Heenae; Lee, Christopher M.

A comprehensive picture of structural changes of cellulosic biomass during enzymatic hydrolysis is essential for a better understanding of enzymatic actions and development of more efficient enzymes. In this study, a suite of analytical techniques including sum frequency generation (SFG) spectroscopy, infrared (IR) spectroscopy, x-ray diffraction (XRD), and x-ray photoelectron spectroscopy (XPS) were employed for lignin-free model biomass samples—Avicel, bleached softwood, and bacterial cellulose—to find correlations between the decrease in hydrolysis rate over time and the structural or chemical changes of biomass during the hydrolysis reaction. The results showed that the decrease in hydrolysis rate over time appears to correlatemore » with the irreversible deposition of non-cellulosic species (either reaction side products or denatured enzymes, or both) on the cellulosic substrate surface. The crystallinity, degree of polymerization, and meso-scale packing of cellulose do not seem to positively correlate with the decrease in hydrolysis rate observed for all three substrates tested in this study. Moreover, it was also found that the cellulose Iα component of the bacterial cellulose is preferentially hydrolyzed by the enzyme than the cellulose Iβ component.« less

Progressive structural changes of Avicel, bleached softwood, and bacterial cellulose during enzymatic hydrolysis

DOE PAGES

Kafle, Kabindra; Shin, Heenae; Lee, Christopher M.; ...

2015-10-14

A comprehensive picture of structural changes of cellulosic biomass during enzymatic hydrolysis is essential for a better understanding of enzymatic actions and development of more efficient enzymes. In this study, a suite of analytical techniques including sum frequency generation (SFG) spectroscopy, infrared (IR) spectroscopy, x-ray diffraction (XRD), and x-ray photoelectron spectroscopy (XPS) were employed for lignin-free model biomass samples—Avicel, bleached softwood, and bacterial cellulose—to find correlations between the decrease in hydrolysis rate over time and the structural or chemical changes of biomass during the hydrolysis reaction. The results showed that the decrease in hydrolysis rate over time appears to correlatemore » with the irreversible deposition of non-cellulosic species (either reaction side products or denatured enzymes, or both) on the cellulosic substrate surface. The crystallinity, degree of polymerization, and meso-scale packing of cellulose do not seem to positively correlate with the decrease in hydrolysis rate observed for all three substrates tested in this study. Moreover, it was also found that the cellulose Iα component of the bacterial cellulose is preferentially hydrolyzed by the enzyme than the cellulose Iβ component.« less

Influence of different litter materials on cecal microbiota colonization in broiler chickens.

PubMed

Torok, V A; Hughes, R J; Ophel-Keller, K; Ali, M; Macalpine, R

2009-12-01

A chicken growth study was conducted to determine if litter type influenced gut microbiota and performance in broilers. Seven bedding materials were investigated and included soft and hardwood sawdust, softwood shavings, shredded paper, chopped straw, rice hulls, and reused softwood shavings. Microbial profiling was done to investigate changes in cecal bacterial communities associated with litter material and age. Cecal microbiota were investigated at 14 and 28 d of age (n = 12 birds/litter material). At both ages, the cecal microbiota of chickens raised on reused litter was significantly (P < 0.05) different from that of chickens raised on any of the other litter materials, except softwood shavings at d 28. Cecal microbiota was also significantly different between birds raised on shredded paper and rice hulls at both ages. Age had a significant influence on cecal microbiota composition regardless of litter material. Similarity in cecal microbial communities among birds raised on the same litter treatment was greater at 28 d of age (29 to 40%) than at 14 d of age (25 to 32%). Bird performance on the different litter materials was measured by feed conversion ratio, live weight, and feed intake. Significant (P < 0.05) differences were detected in live weight at 14 d of age and feed intake at 14 and 28 d of age among birds (n = 160/treatment) raised on some of the different litter materials. However, no significant (P > 0.05) differences were observed in feed conversion ratio among birds raised on any of the 7 different litter materials at either 14 or 28 d of age. The type of litter material can influence colonization and development of cecal microbiota in chickens. Litter-induced changes in the gut microbiota may be partially responsible for some of the significant differences observed in early rates of growth; therefore, litter choice may have an important role in poultry gut health particularly in the absence of in-feed antibiotics.

Pyrolysis of softwood carbohydrates in a fluidized bed reactor.

PubMed

Aho, Atte; Kumar, Narendra; Eränen, Kari; Holmbom, Bjarne; Hupa, Mikko; Salmi, Tapio; Murzin, Dmitry Yu

2008-09-01

In the present work pyrolysis of pure pine wood and softwood carbohydrates, namely cellulose and galactoglucomannan (the major hemicellulose in coniferous wood), was conducted in a batch mode operated fluidized bed reactor. Temperature ramping (5 degrees C/min) was applied to the heating until a reactor temperature of 460 degrees C was reached. Thereafter the temperature was kept until the release of non-condensable gases stopped. The different raw materials gave significantly different bio-oils. Levoglucosan was the dominant product in the cellulose pyrolysis oil. Acetic acid was found in the highest concentrations in both the galactoglucomannan and in the pine wood pyrolysis oils. Acetic acid is most likely formed by removal of O-acetyl groups from mannose units present in GGM structure.

Pyrolysis of Softwood Carbohydrates in a Fluidized Bed Reactor

PubMed Central

Aho, Atte; Kumar, Narendra; Eränen, Kari; Holmbom, Bjarne; Hupa, Mikko; Salmi, Tapio; Murzin, Dmitry Yu.

2008-01-01

In the present work pyrolysis of pure pine wood and softwood carbohydrates, namely cellulose and galactoglucomannan (the major hemicellulose in coniferous wood), was conducted in a batch mode operated fluidized bed reactor. Temperature ramping (5 °C/min) was applied to the heating until a reactor temperature of 460 °C was reached. Thereafter the temperature was kept until the release of non-condensable gases stopped. The different raw materials gave significantly different bio-oils. Levoglucosan was the dominant product in the cellulose pyrolysis oil. Acetic acid was found in the highest concentrations in both the galactoglucomannan and in the pine wood pyrolysis oils. Acetic acid is most likely formed by removal of O-acetyl groups from mannose units present in GGM structure. PMID:19325824

Analysis, pretreatment and enzymatic saccharification of different fractions of Scots pine.

PubMed

Normark, Monica; Winestrand, Sandra; Lestander, Torbjörn A; Jönsson, Leif J

2014-03-19

Forestry residues consisting of softwood are a major lignocellulosic resource for production of liquid biofuels. Scots pine, a commercially important forest tree, was fractionated into seven fractions of chips: juvenile heartwood, mature heartwood, juvenile sapwood, mature sapwood, bark, top parts, and knotwood. The different fractions were characterized analytically with regard to chemical composition and susceptibility to dilute-acid pretreatment and enzymatic saccharification. All fractions were characterized by a high glucan content (38-43%) and a high content of other carbohydrates (11-14% mannan, 2-4% galactan) that generate easily convertible hexose sugars, and by a low content of inorganic material (0.2-0.9% ash). The lignin content was relatively uniform (27-32%) and the syringyl-guaiacyl ratio of the different fractions were within the range 0.021-0.025. The knotwood had a high content of extractives (9%) compared to the other fractions. The effects of pretreatment and enzymatic saccharification were relatively similar, but without pretreatment the bark fraction was considerably more susceptible to enzymatic saccharification. Since sawn timber is a main product from softwood species such as Scots pine, it is an important issue whether different parts of the tree are equally suitable for bioconversion processes. The investigation shows that bioconversion of Scots pine is facilitated by that most of the different fractions exhibit relatively similar properties with regard to chemical composition and susceptibility to techniques used for bioconversion of woody biomass.

Zone lines

Treesearch

Kevin T. Smith

2001-01-01

Zone lines are narrow, usually dark markings formed in decaying wood. Zone lines are found most frequently in advanced white rot of hardwoods, although they occasionally are associated both with brown rot and with softwoods.

Southern pulpwood production, 1981

Treesearch

Cecil C. Hutchins

1982-01-01

Southern pulpwood production has remained almost constant for the past 3 years. In 1981, production totaled 54.3 million cords with softwood roundwood accounting for about 50 percent, hardwood roundwood 18 percent, and mill byproducts 32 percent.

Clearcut mapping and forest type mapping in eastern forests with LANDSAT data

NASA Technical Reports Server (NTRS)

Sutherland, K.

1981-01-01

The development and use of signature packages which provide a forest type map and which identify clearcut areas is discussed. The type map divides the forest land into three categories: softwood, mixed wood, and hardwood. The user defines each of these categories and adjusts the signature package to fit his needs. Success in identifying clearcuts and their stage of regrowth was demonstrated in New Hampshire where clearcuts range in size from 5 to 100 acres with between 30 and 40 acres being the most common.

Influence of steam pretreatment severity on post-treatments used to enhance the enzymatic hydrolysis of pretreated softwoods at low enzyme loadings.

PubMed

Kumar, Linoj; Chandra, Richard; Saddler, Jack

2011-10-01

It is recognized that some form of post-treatment will usually be required if reasonable hydrolysis yields (>60%) of steam pretreated softwood are to be achieved when using low enzyme loadings (5 FPU/g cellulose). In the work reported here we modified/removed lignin from steam pretreated softwood while investigating the influence that the severity of pretreatment might have on the effectiveness of subsequent post-treatments. Although treatment at a lower severity could provide better overall hemicellulose recovery, post-treatment was not as effective on the cellulosic component. Pretreatment at medium severity resulted in the best compromise, providing reasonable recovery of the water soluble hemicellulose sugars and the use of post-treatment conditions that significantly increased the enzymatic hydrolysis of the water insoluble cellulosic component. Post-treatment with alkaline hydrogen peroxide or neutral sulfonation resulted in 62% cellulose hydrolysis at an enzyme loading of 5 FPU/g cellulose, which was four times greater than was obtained when the cellulosic fraction was not post-treated. When the enzyme loading was increased to 15 FPU/g cellulose, the post-treated cellulosic fraction was almost completely hydrolyzed to glucose. Despite the higher lignin content (44%) of the sulfonated substrate, similar hydrolysis yields to those achieved after alkaline peroxide post-treatment (14% lignin content) indicated that, in addition to lignin removal, lignin modification also plays an important role in influencing the effectiveness of hydrolysis when low enzyme loadings are used. Copyright © 2011 Wiley Periodicals, Inc.

Studying the effects of laccase treatment in a softwood dissolving pulp: cellulose reactivity and crystallinity.

PubMed

Quintana, Elisabet; Valls, Cristina; Barneto, Agustín G; Vidal, Teresa; Ariza, José; Roncero, M Blanca

2015-03-30

An enzymatic biobleaching sequence (LVAQPO) using a laccase from Trametes villosa in combination with violuric acid (VA) and then followed by a pressurized hydrogen peroxide treatment (PO) was developed and found to give high bleaching properties and meet dissolving pulp requirements: high brightness, low content of hemicellulose, satisfactory pulp reactivity, no significant cellulose degradation manifested by α-cellulose and HPLC, and brightness stability against moist heat ageing. The incorporation of a laccase-mediator system (LMS) to bleach sulphite pulps can be a good alternative to traditional bleaching processes since thermogravimetric analysis (TGA) showed that the laccase treatment prevented the adverse effect of hydrogen peroxide on fibre surface as observed during a conventional hydrogen peroxide bleaching treatment (PO). Although VA exhibited the best results in terms of bleaching properties, the performance of natural mediators, such as p-coumaric acid and syringaldehyde, was discussed in relation to changes in cellulose surface detected by TGA. Copyright © 2014 Elsevier Ltd. All rights reserved.

Analytical Approaches to Understanding the Role of Non-carbohydrate Components in Wood Biorefinery

NASA Astrophysics Data System (ADS)

Leskinen, Timo Ensio

This dissertation describes the production and analysis of wood subjected to a novel electron beam-steam explosion pretreatment (EB-SE) pretreatment with the aim to evaluate its suitability for the production of bioethanol. The goal of these studies was to: 1) develop analytical methods for the investigation of depolymerization of wood components under pretreatments, 2) analyze the effects of EB-SE pretreatment on the pretreated biomass, 3) define how lignin and extractive components affect the action of enzymes on cellulosic substrates, and 4) examine how changes in lignin structure impact its isolation and potential conversion into value added chemicals. The first section of the work describes the development of a size-exclusion chromatography (SEC) methodology for molecular weight analysis for native and pretreated wood. The selective analysis of carbohydrates and lignin from native wood was made possible by the combination of two selective derivatization methods, ionic liquid assisted benzoylation of the carbohydrate fraction and acetobromination of the lignin in acetic acid media. This method was then used to examine changes in softwood samples after the EB-SE pretreatment. The methodology was shown to be effective for monitoring changes in the molecular weight profiles of the pretreated wood. The second section of the work investigates synergistic effects of the EB-SE pretreatment on the molecular level structures of wood components and the significance of these alterations in terms of enzymatic digestibility. The two pretreatment steps depolymerized cell wall components in different fashion, while showing synergistic effects. Hardwood and softwood species responded differently to similar treatment conditions, which was attributed to the well-known differences in the structure of their lignin and hemicellulose fractions. The relatively crosslinked lignin in softwood appeared to limit swelling and subsequent depolymerization in comparison to hardwood. Additional studies revealed that an insoluble, likely crosslinked, lignin fraction induced enzyme inhibition, while soluble lower molecular weight fractions were slightly beneficial for the enzymatic hydrolysis of cellulose. The third section of the work addresses the influence of hydrophobic wood extractives and representative model compounds on the cellulolytic hydrolysis of cellulosic substrates. Deposition of specific fractions of isolated wood extractives on cellulose was found either to enhance or inhibit the action of cellulase enzymes, depending on the chemical nature of the fraction. Using model compounds this effect was found to be correlated with the compounds chemical structure, and underlying mechanisms could be rationalized by Hansen solubility parameter considerations. The amphiphilic and hydrophobic nature of the model extractives was found to influence the deposition of extractives on the cellulose surfaces, and the adsorption of cellulolytic enzymes, as measured with Quartz Crystal Microgravimetry. Beneficial effects of the extractives were likely related to reduction in the irreversible binding of the enzymes on the cellulose substrate. The fourth section of the work deals with the recovery of lignin using extraction methods based on aqueous alkali or aqueous ethanol. The objective of this study was to understand how the yield, MW and structure of lignin recovered from the process residue was impacted by the different isolation methods. Mild extraction conditions allowed for recovery of approximately 40 wt.% of the lignin present in the process residues. Base or acid catalyzed hydrolysis of the lignin could increase the recovery lignin yield to about 76 wt.%. The recovered lignins were characterized in terms of their functional groups, molecular weights and thermal properties. The lignins from mild alkali and ethanol extractions showed similarities in their chemical profiles while, as expected, the hydrolyzed lignins were different and depended on the hydrolysis conditions. The molecular weight and thermal properties of the lignin products were affected by the applied isolation process.

Nationwide forestry applications program: Ten-Ecosystem Study (TES) site 5 report, Kershaw County, South Carolina, report 4

NASA Technical Reports Server (NTRS)

Dillman, R. D. (Principal Investigator)

1978-01-01

The author has identified the following significant results. The Kershaw County site, South Carolina, was selected to be representative of both the oak-pine ecosystem and the southeastern pine ecosystem. The following processing results have concluded that: (1) early spring LANDSAT data provide the best contrast between forest features; (2) level 2 forest features (softwood, hardwood, grassland, and water) can be classified with an accuracy of 70% + or - 5.7% at the 90% confidence level; (3) level 3 species classification was inconclusive; (4) temporal data did not provide a significant increase in classification accuracy of level 2 features, over single date classification to warrant the additional processing; and (5) training fields from only 10% of the site can be used to classify the entire site.

Analysis, pretreatment and enzymatic saccharification of different fractions of Scots pine

PubMed Central

2014-01-01

Background Forestry residues consisting of softwood are a major lignocellulosic resource for production of liquid biofuels. Scots pine, a commercially important forest tree, was fractionated into seven fractions of chips: juvenile heartwood, mature heartwood, juvenile sapwood, mature sapwood, bark, top parts, and knotwood. The different fractions were characterized analytically with regard to chemical composition and susceptibility to dilute-acid pretreatment and enzymatic saccharification. Results All fractions were characterized by a high glucan content (38-43%) and a high content of other carbohydrates (11-14% mannan, 2-4% galactan) that generate easily convertible hexose sugars, and by a low content of inorganic material (0.2-0.9% ash). The lignin content was relatively uniform (27-32%) and the syringyl-guaiacyl ratio of the different fractions were within the range 0.021-0.025. The knotwood had a high content of extractives (9%) compared to the other fractions. The effects of pretreatment and enzymatic saccharification were relatively similar, but without pretreatment the bark fraction was considerably more susceptible to enzymatic saccharification. Conclusions Since sawn timber is a main product from softwood species such as Scots pine, it is an important issue whether different parts of the tree are equally suitable for bioconversion processes. The investigation shows that bioconversion of Scots pine is facilitated by that most of the different fractions exhibit relatively similar properties with regard to chemical composition and susceptibility to techniques used for bioconversion of woody biomass. PMID:24641769

Alabama forests: Trends and prospects

Treesearch

Paul A. Murphy

1973-01-01

Between 1963 and 1972, forest area in Alabama declined 2 percent to 21.3 million acres. Softwood volume increased 30 percent and hardwood 15 percent. Volumes increased in all tree-size classes, but increases were greatest in small trees.

78 FR 24152 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order; Request...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

...: Interested persons are invited to submit comments concerning this notice. Comments should be submitted online... requirements for individuals filling out reports and remitting assessments to the Board. The forms are simple...

Factors affecting power requirements for chipping whole trees

Treesearch

Bryce J. Stokes; William F. Watson; Donald L. Sirois

1987-01-01

Large and small in-woods disk chippers were used in field tests to determine the power requirements for chipping whole trees. Hardwood and softwood species were evaluated over a range of diameter classes and moisture contents.

Arkansas' timber resources updated, 1975

Treesearch

Roy C. Beltz

1975-01-01

The January 1, 1975, inventory is estimated to be 16.2 billion cubic feet of growing stock; about 60 percent is hardwoods. Both softwood and hardwood volume increased at an average rate of 1 percent per year since 1969.

The anisotropic Hooke's law for cancellous bone and wood.

PubMed

Yang, G; Kabel, J; van Rietbergen, B; Odgaard, A; Huiskes, R; Cowin, S C

A method of data analysis for a set of elastic constant measurements is applied to data bases for wood and cancellous bone. For these materials the identification of the type of elastic symmetry is complicated by the variable composition of the material. The data analysis method permits the identification of the type of elastic symmetry to be accomplished independent of the examination of the variable composition. This method of analysis may be applied to any set of elastic constant measurements, but is illustrated here by application to hardwoods and softwoods, and to an extraordinary data base of cancellous bone elastic constants. The solid volume fraction or bulk density is the compositional variable for the elastic constants of these natural materials. The final results are the solid volume fraction dependent orthotropic Hooke's law for cancellous bone and a bulk density dependent one for hardwoods and softwoods.

Chemical characteristics and enzymatic saccharification of lignocellulosic biomass treated using high-temperature saturated steam: comparison of softwood and hardwood.

PubMed

Asada, Chikako; Sasaki, Chizuru; Hirano, Takeshi; Nakamura, Yoshitoshi

2015-04-01

This study investigated the effect of high-temperature saturated steam treatments on the chemical characteristics and enzymatic saccharification of softwood and hardwood. The weight loss and chemical modification of cedar and beech wood pieces treated at 25, 35, and 45 atm for 5 min were determined. Fourier transform infrared and X-ray diffraction analyses indicated that solubilization and removal of hemicellulose and lignin occurred by the steam treatment. The milling treatment of steam-treated wood enhanced its enzymatic saccharification. Maximum enzymatic saccharification (i.e., 94% saccharification rate of cellulose) was obtained using steam-treated beech at 35 atm for 5 min followed by milling treatment for 1 min. However, the necessity of the milling treatment for efficient enzymatic saccharification is dependent on the wood species. Copyright © 2015 Elsevier Ltd. All rights reserved.

Processing-Structure-Property Relationships for Lignin-Based Carbonaceous Materials Used in Energy-Storage Applications

DOE PAGES

García-Negrón, Valerie; Phillip, Nathan D.; Li, Jianlin; ...

2016-11-18

Lignin, an abundant organic polymer and a byproduct of pulp and biofuel production, has potential applications owing to its high carbon content and aromatic structure. Processing structure relationships are difficult to predict because of the heterogeneity of lignin. Here, this work discusses the roles of unit operations in the carbonization process of softwood lignin, and their resulting impacts on the material structure and electrochemical properties in application as the anode in lithium-ion cells. The processing variables include the lignin source, temperature, and duration of thermal stabilization, pyrolysis, and reduction. Materials are characterized at the atomic and microscales. High-temperature carbonization, atmore » 2000 °C, produces larger graphitic domains than at 1050 °C, but results in a reduced capacity. Coulombic efficiencies over 98 % are achieved for extended galvanostatic cycling. Consequently, a properly designed carbonization process for lignin is well suited for the generation of low-cost, high-efficiency electrodes.« less

Preparation and characterization of reinforced papers using nano bacterial cellulose.

PubMed

Tabarsa, Taghi; Sheykhnazari, Somayeh; Ashori, Alireza; Mashkour, Mahdi; Khazaeian, Abolghasem

2017-08-01

The main goal of this work was to reinforce softwood pulp (SP) with bacterial cellulose (BC) to generate a sustainable biocomposite. BC is a nanocellulose, which was anticipated to increase interfacial adhesion between the cellulosic fibers and BC. The organism used was Gluconacetobacter xylinus, which was incubated in a static Hestrin-Schramm culture at 28°C for 14days. The specimens of BC, SP and the reinforced SP with BC were characterized using X-ray diffraction (XRD), FT-IR, FESEM, and physico-mechanical testing. The crystallinity index was found to be 83 and 54% for BC and SP, respectively. FT-IR spectra showed that the composition of BC was fully different from that of SP fibers. Based on FESEM images, one can conclude that BC and softwood fibers do form a good combination with a nonporous structure. BC fibers fill in among the softwood fibers in the sheet. The physical and mechanical properties showed that as the dosage of BC increased, the properties of tensile index, tear index, and burst index greatly improved, while the porosity and the elongation decreased. The reason for the improved mechanical properties can be attributed to the increase of interfibrillar bonding which reduced porosity. This would be due to the high aspect ratio of BC that is capable of connecting between the cellulosic fibers and BC nanofibers, enhancing a large contact surface and therefore producing excellent coherence. This study suggests that BC could be a promising material for reinforcing composites at low loading. Copyright © 2017 Elsevier B.V. All rights reserved.

Control performance of paper-based blood analysis devices through paper structure design.

PubMed

Li, Lizi; Huang, Xiaolei; Liu, Wen; Shen, Wei

2014-12-10

In this work, we investigated the influence of paper structure on the performance of paper-based analytical devices that are used for blood analysis. The question that we aimed to answer is how the fiber type (i.e., softwood and hardwood fibers) influences the fiber network structure of the paper, which affects the transport of red blood cells (RBCs) in paper. In the experimental design, we isolated the influence of fiber types on the paper structure from all other possible influencing factors by removing the fines from the pulps and not using any additives. Mercury porosimetry was employed to characterize the pore structures of the paper sheets. The results show that papers with a low basis weight that are made with short hardwood fibers have a higher porosity (i.e., void fraction) and simpler pore structures compared with papers made with long softwood fibers. RBC transport in paper carried by saline solution was investigated in two modes: lateral chromatographic elution and vertical flow-through. The results showed that the complexity of the paper's internal pore structure has a dominant influence on the transport of RBCs in paper. Hardwood fiber sheets with a low basis weight have a simple internal pore structure and allow for the easy transport of RBCs. Blood-typing sensors built with low basis weight hardwood fibers deliver high-clarity assays. Softwood fiber papers are found to have a more complex pore structure, which makes RBC transport more difficult, leading to blood-typing results of low clarity. This study provides the principle of paper sheet design for paper-based blood analysis sensors.

7 CFR 1217.30 - United States.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 10 2012-01-01 2012-01-01 false United States. 1217.30 Section 1217.30 Agriculture..., and Industry Information Order Definitions § 1217.30 United States. United States means collectively... possessions of the United States. Softwood Lumber Board ...

7 CFR 1217.30 - United States.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 10 2014-01-01 2014-01-01 false United States. 1217.30 Section 1217.30 Agriculture..., and Industry Information Order Definitions § 1217.30 United States. United States means collectively... possessions of the United States. Softwood Lumber Board ...

7 CFR 1217.30 - United States.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false United States. 1217.30 Section 1217.30 Agriculture..., and Industry Information Order Definitions § 1217.30 United States. United States means collectively... possessions of the United States. Softwood Lumber Board ...

7 CFR 1217.12 - Information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false Information. 1217.12 Section 1217.12 Agriculture..., CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer Education, and Industry Information Order Definitions § 1217.12 Information. Information means activities or...

7 CFR 1217.12 - Information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 10 2014-01-01 2014-01-01 false Information. 1217.12 Section 1217.12 Agriculture..., CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer Education, and Industry Information Order Definitions § 1217.12 Information. Information means activities or...

7 CFR 1217.12 - Information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 10 2012-01-01 2012-01-01 false Information. 1217.12 Section 1217.12 Agriculture..., CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Softwood Lumber Research, Promotion, Consumer Education, and Industry Information Order Definitions § 1217.12 Information. Information means activities or...

Midcycle evaluation of Mississippi timber resources

Treesearch

Dwane D. Van Hooser

1973-01-01

Between 1967 and 1972 forest acreage in Mississippi decreased by 1 percent, but softwood volume increased by 10 percent and hardwood by 6 percent. More than 0.5 billion cubic feet of roundwood were harvested from the State's forests in 1972.

Removal of glucuronic acid from xylan is a strategy to improve the conversion of plant biomass to sugars for bioenergy.

PubMed

Lyczakowski, Jan J; Wicher, Krzysztof B; Terrett, Oliver M; Faria-Blanc, Nuno; Yu, Xiaolan; Brown, David; Krogh, Kristian B R M; Dupree, Paul; Busse-Wicher, Marta

2017-01-01

Plant lignocellulosic biomass can be a source of fermentable sugars for the production of second generation biofuels and biochemicals. The recalcitrance of this plant material is one of the major obstacles in its conversion into sugars. Biomass is primarily composed of secondary cell walls, which is made of cellulose, hemicelluloses and lignin. Xylan, a hemicellulose, binds to the cellulose microfibril and is hypothesised to form an interface between lignin and cellulose. Both softwood and hardwood xylan carry glucuronic acid side branches. As xylan branching may be important for biomass recalcitrance and softwood is an abundant, non-food competing, source of biomass it is important to investigate how conifer xylan is synthesised. Here, we show using Arabidopsis gux mutant biomass that removal of glucuronosyl substitutions of xylan can allow 30% more glucose and over 700% more xylose to be released during saccharification. Ethanol yields obtained through enzymatic saccharification and fermentation of gux biomass were double those obtained for non-mutant material. Our analysis of additional xylan branching mutants demonstrates that absence of GlcA is unique in conferring the reduced recalcitrance phenotype. As in hardwoods, conifer xylan is branched with GlcA. We use transcriptomic analysis to identify conifer enzymes that might be responsible for addition of GlcA branches onto xylan in industrially important softwood. Using a combination of in vitro and in vivo activity assays, we demonstrate that a white spruce ( Picea glauca ) gene, PgGUX , encodes an active glucuronosyl transferase. Glucuronic acid introduced by PgGUX reduces the sugar release of Arabidopsis gux mutant biomass to wild-type levels indicating that it can fulfil the same biological function as native glucuronosylation. Removal of glucuronic acid from xylan results in the largest increase in release of fermentable sugars from Arabidopsis plants that grow to the wild-type size. Additionally, plant material used in this work did not undergo any chemical pretreatment, and thus increased monosaccharide release from gux biomass can be achieved without the use of environmentally hazardous chemical pretreatment procedures. Therefore, the identification of a gymnosperm enzyme, likely to be responsible for softwood xylan glucuronosylation, provides a mutagenesis target for genetically improved forestry trees.

South Dakota's forests 2005

Treesearch

Ronald J. Piva; W. Keith Moser; Douglas D. Haugan; Gregory J. Josten; Gary J. Brand; Brett J. Butler; Susan J. Crocker; Mark H. Hansen; Dacia M. Meneguzzo; Charles H. Perry; Christopher W. Woodall

2009-01-01

The first completed annual inventory of South Dakota's forests reports almost 1.7 million acres of forest land. Softwood forests make up 74 percent of the total forest land area; the ponderosa pine forest type by itself accounts for 69 percent of the total.

South Dakota's Forests 2010

Treesearch

Ronald J. Piva; Brian F. Walters; Douglas D. Haugan; Gregory J. Josten; Brett J. Butler; Susan J. Crocker; Grant M. Domke; Mark A. Hatfield; Cassandra M. Kurtz; Andrew J. Lister; Tonya W. Lister; W. Keith Moser; Mark D. Nelson; Christopher W. Woodall

2013-01-01

The second completed annual inventory of South Dakota's forests reports 1.9 million acres of forest land. Softwood forests make up 68 percent of the total forest land area, with the ponderosa pine forest type by itself accounting for 60 percent of the total.

Genetic transformation of Pinus palustris (longleaf pine)

Treesearch

Alex M. Diner

1999-01-01

Longleaf pine (Pinus palustris Mill.) is an important softwood species in the Southeast United States. In presettlement times, this species occupied extensive, pure stands throughout the Atlantic and Gulf Coastal Plains from southeastern Virginia to eastern Texas, as well as south...

Comparison of two cut-to-length harvesting systems operating in eastern hardwoods

Treesearch

Chris B. LeDoux; Niel K. Huyler

2001-01-01

We compared production rates, operating costs, and break-even points (BEP) for small and large cut-to-length (CTL) harvesting systems operating at several machine utilization rates (MUR) in mixed hardwood and softwood stands in Vermont.

Programmable calculator programs to solve softwood volume and value equations.

Treesearch

Janet K. Ayer Sachet

1982-01-01

This paper presents product value and product volume equations as programs for handheld calculators. These tree equations are for inland Douglas-fir, young-growth Douglas-fir, western white pine, ponderosa pine, and western larch. Operating instructions and an example are included.

LOW EMISSION AND HIGH EFFICIENCY RESIDENTIAL PELLET-FIRED HEATERS

EPA Science Inventory

The paper gives results of air emissions testing and efficiency testing on new commercially available under-feed and top-feed residential heaters burning hardwood- and softwood-based pellets. The results were compared with data from earlier models. Reductions in air emissions w...

Study of root tensile strength of softwood and hardwood tree species: Implications for slope stability

NASA Astrophysics Data System (ADS)

Esmaiili, Marzieh; Abdi, Ehsan; Jafary, Mohammad; Majnounian, Baris

2017-04-01

Landslides are known as one of the major natural hazards and often incurring economics and human life losses. The role of tree roots in slope stability is very important, especially when human lives and infrastructure are at risk. The anchorage of roots and improvement of slope stability mainly depend on specific properties of root network systems, such as tensile strength. These properties of the roots which govern the degree of reinforcement are different among tree species. Although, many studies have been conducted about plant biotechnical properties of species, yet there is lack of knowledge on comparing root systems of softwood and hardwood tree species for similar site conditions. Therefore this study was conducted to assess the tensile strength of the root system of Picea abies (softwood species) and Fraxinus excelsior (hardwood species) planted on two forested hillslopes. To this aim, single root specimens were sampled for each species and their tensile strength were then measured in laboratory using a computer controlled Instron Universal Testing Machine. According to the results root tensile strength tends to decrease with diameter according to a power law for both species. Based on analysis of covariance (ANCOVA), a significant difference has been observed in the tensile strength between the two studied species. Also the results showed that the value of mean root tensile strength for Picea abies (19.31 ± 2.64 MPa) was much more than that of Fraxinus excelsior (16.98 ± 1.01 MPa) within all root diameter classes. The data presented in this study may expand the knowledge of biotechnical properties of Picea abies and Fraxinus excelsior, as biomaterial for soil bioengineering.

Retene Emission from Residential Solid Fuels in China and Evaluation of Retene as a Unique Marker for Soft Wood Combustion

PubMed Central

Shen, Guofeng; Tao, Shu; Wei, Siye; Zhang, Yanyan; Wang, Rong; Wang, Bin; Li, Wei; Shen, Huizhong; Huang, Ye; Yang, Yifeng; Wang, Wei; Wang, Xilong; Massey Simonich, Staci L.

2012-01-01

Retene (1-methyl-7-isopropylphenanthrene) is often used as a marker for softwood combustion and for polycyclic aromatic hydrocarbon (PAH) source apportionment. The emission factors of retene (EFRET) from 11 crop residues, 27 firewood and 5 coals were measured using traditional rural Chinese stoves. Retene was measured in combustion emissions from all of the residential fuels tested and EFRET varied significantly among the fuels due to the differences in fuel properties and combustion conditions. EFRET for pine (0.34±0.08 mg/kg) and larch (0.29±0.22 mg/kg) were significantly higher than those of other wood types, including fir and cypress (0.081±0.058 mg/kg). However, EFRET for crop residues varied from 0.048±0.008 to 0.37±0.14 mg/kg and were not significantly lower than those for softwood (0.074±0.026 to 0.34±0.08 mg/kg). The EFRET for coal were very high and ranged from 2.2±1.5 (anthracite briquette) to 187±113 mg/kg (raw bituminous chunk). EFRET was positively correlated with EFs of co-emitted particulate matter (EFPM) and phenanthrene (EFPHE) for crop residue and coal, but not for wood. In addition, the ratios of EFPHE/EFRET and EFPM/EFRET for coals were much lower than those for crop residues and wood. These data suggest that retene is not a unique PAH marker for softwood combustion and that coal combustion, in particular, should be taken into account when retene is used for PAH source apportionment. PMID:22452486

Determination of molecular weight distributions in native and pretreated wood.

PubMed

Leskinen, Timo; Kelley, Stephen S; Argyropoulos, Dimitris S

2015-03-30

The analysis of native wood components by size-exclusion chromatography (SEC) is challenging. Isolation, derivatization and solubilization of wood polymers is required prior to the analysis. The present approach allowed the determination of molecular weight distributions of the carbohydrates and of lignin in native and processed woods, without preparative component isolation steps. For the first time a component selective SEC analysis of sawdust preparations was made possible by the combination of two selective derivatization methods, namely; ionic liquid assisted benzoylation of the carbohydrate fraction and acetobromination of the lignin in acetic acid media. These were optimized for wood samples. The developed method was thus used to examine changes in softwood samples after degradative mechanical and/or chemical treatments, such as ball milling, steam explosion, green liquor pulping, and chemical oxidation with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ). The methodology can also be applied to examine changes in molecular weight and lignin-carbohydrate linkages that occur during wood-based biorefinery operations, such as pretreatments, and enzymatic saccharification. Copyright © 2014 Elsevier Ltd. All rights reserved.

Propagation of Sparkleberry (Vaccinium arboreum) improved via cutting type

USDA-ARS?s Scientific Manuscript database

The objectives of this study were to determine whether cutting type (softwood, semi-hardwood, or hardwood), cutting position (terminal or subterminal), IBA concentration, or the interaction of these treatments influence rooting of V. arboreum stem cuttings. Previous experiments did not specify if th...

Shortleaf pine in perspective: outlook for the national forests

Treesearch

James R. Crouch

1986-01-01

Shortleaf pine occupies more acreage on southern national forests than does any other softwood species but major concentrations on national forest lands occur only in Arkansas, Texas and Missouri. National forests in these states intend to continue to regenerate most shortleaf stands to shortleaf.

75 FR 61025 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-01

... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service 7 CFR Part 1217 [Document Number AMS-FV... Information Order; Referendum Procedures AGENCY: Agricultural Marketing Service, USDA. ACTION: Proposed rule... Federal Register. This proposed rule also announces the Agricultural Marketing Service's (AMS) intent to...

Mechanized Red Pine Tree Planting Operation -- A Time Study

Treesearch

Joseph B. Sturos; Edwin S. Miyata

1984-01-01

Projected softwood shortages and high costs of mechanized tree planting indicate that more efficient planting equipment and systems are needed. This paper presents cost and productivity data for mechanically planting red pine seelings on a site previously occupied by hardwoods in northern Wisconsin

Pulpwood Prices for the Midsouth, 1982

Treesearch

James F. Rosson

1984-01-01

Average prices for roundwood, chipped residues, and saw-dust rose 4 percent from 1981 to 1982. Pulpwood price increases are due to inflation as real costs have remained stable. The price for softwood roundwood is $52.89 per cord; hardwood roundwood is $39.79 per cord.

7 CFR 1955.105 - Real property affected (CONACT).

Code of Federal Regulations, 2014 CFR

2014-01-01

...); Economic Opportunity (EO); Economic Emergency (EE); Softwood Timber (ST); Community Facility (CF); Water... crime after December 23, 1985. (c) Effects of farm property sales on farm values. State Directors will... values and trend reports such as those available from the Economic Research Service or professional...

7 CFR 1955.105 - Real property affected (CONACT).

Code of Federal Regulations, 2013 CFR

2013-01-01

...); Economic Opportunity (EO); Economic Emergency (EE); Softwood Timber (ST); Community Facility (CF); Water... crime after December 23, 1985. (c) Effects of farm property sales on farm values. State Directors will... values and trend reports such as those available from the Economic Research Service or professional...

7 CFR 1955.105 - Real property affected (CONACT).

Code of Federal Regulations, 2012 CFR

2012-01-01

...); Economic Opportunity (EO); Economic Emergency (EE); Softwood Timber (ST); Community Facility (CF); Water... crime after December 23, 1985. (c) Effects of farm property sales on farm values. State Directors will... values and trend reports such as those available from the Economic Research Service or professional...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Starace, Anne K.; Evans, Robert J.; Lee, David D.

A variety of hardwood, softwood, and herbaceous feedstocks (oak, southern yellow pine mix, loblolly pine, pinyon-juniper mix, and switchgrass) were each torrefied at 200, 250, and 300 °C. Each of the feedstocks was pyrolyzed and the resulting vapors were analyzed with a molecular beam mass spectrometer (py-MBMS). Compositional analysis was used to measure the total lignin content of three of the feedstocks (southern yellow pine, softwood; oak, hardwood; and switchgrass, herbaceous) before and after torrefaction at 300 °C, and large differences in the fraction of lignin lost during torrefaction were found between feedstocks, with oak having the largest decrease inmore » lignin during torrefaction and switchgrass having the least. Finally, it is hypothesized that these differences in the thermal degradation are due to, in part, the different ratios of S, G, and H lignins in the feedstocks. Additionally, the torrefaction of kraft lignin was studied using thermogravimetric analysis coupled with Fourier transform infrared spectroscopy (TGA-FTIR) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR).« less

Laccase/HBT and laccase-CBM/HBT treatment of softwood kraft pulp: impact on pulp bleachability and physical properties.

PubMed

Ravalason, Holy; Bertaud, Frédérique; Herpoël-Gimbert, Isabelle; Meyer, Valérie; Ruel, Katia; Joseleau, Jean-Paul; Grisel, Sacha; Olivé, Caroline; Sigoillot, Jean-Claude; Petit-Conil, Michel

2012-10-01

Pycnoporus cinnabarinus laccase and a chimeric laccase-CBM were applied in softwood kraft pulp biobleaching in the presence of 1-hydroxybenzotriazole (HBT). The presence of CBM could enhance the laccase biobleaching potential as a decrease in the enzymatic charge and chlorine dioxide consumption, as well as an increase in pulp brightness were observed. Laccase/HBT treatment could be improved by increasing oxygen pressure from 1 to 3bar and pulp consistency from 5% to 10%. Conversely, under the same conditions, no improvement of laccase-CBM/HBT treatment was observed, indicating a different behavior of both systems. However, laccase-CBM/HBT treatment led to a better preservation of pulp properties. This effect was probably due to fiber surface modifications involving the action of the CBM. Transmission electron microscopy examination of pulp fibers indicated a retention of laccase-CBM inside the pulp fibers due to CBM binding and an increased external microfibrillation of the fibers due to enzymatic treatments. Copyright © 2012 Elsevier Ltd. All rights reserved.

ZnCl 2 induced catalytic conversion of softwood lignin to aromatics and hydrocarbons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Hongliang; Zhang, Libing; Deng, Tiansheng

2016-01-01

Selective cleavage of C-O-C bonds in lignin without disrupting C-C linkages can result in releasing aromatic monomers and dimers that can be subsequently converted into chemicals and fuels. Results showed that both biomass-derived lignin and lignin model compounds were depolymerized in a highly concentrated ZnCl2 solution. Zn2+ ions in highly concentrated ZnCl2 solutions appeared to selectively coordinate with C-O-C bonds to cause key linkages of lignin much easier to cleave. In 63 wt.% ZnCl2 solution at 200 °C for 6 h, nearly half of the softwood technical lignin was converted to liquid products, of which the majority was alkylphenols. Resultsmore » indicated that most β-O-4 and Cmethyl-OAr bonds of model compounds were cleaved undersame conditions, providing a foundation towards understanding lignin depolymerization in a concentrated ZnCl2 solution. The phenolic products were further converted into cyclic hydrocarbons via hydrodeoxygenation and coupling reactions by co-catalyst Ru/C.« less

Investigation of forestry resources and other remote sensing data. 1: LANDSAT. 2: Remote sensing of volcanic emissions

NASA Technical Reports Server (NTRS)

Birnie, R. W.; Stoiber, R. E. (Principal Investigator)

1983-01-01

Computer classification of LANDSAT data was used for forest type mapping in New England. The ability to classify areas of hardwood, softwood, and mixed tree types was assessed along with determining clearcut regions and gypsy moth defoliation. Applications of the information to forest management and locating potential deer yards were investigated. The principal activities concerned with remote sensing of volcanic emissions centered around the development of remote sensors for SO2 and HCl gas, and their use at appropriate volcanic sites. Two major areas were investigated (Masaya, Nicaragua, and St. Helens, Washington) along with several minor ones.

Landsat for practical forest type mapping - A test case

NASA Technical Reports Server (NTRS)

Bryant, E.; Dodge, A. G., Jr.; Warren, S. D.

1980-01-01

Computer classified Landsat maps are compared with a recent conventional inventory of forest lands in northern Maine. Over the 196,000 hectare area mapped, estimates of the areas of softwood, mixed wood and hardwood forest obtained by a supervised classification of the Landsat data and a standard inventory based on aerial photointerpretation, probability proportional to prediction, field sampling and a standard forest measurement program are found to agree to within 5%. The cost of the Landsat maps is estimated to be $0.065/hectare. It is concluded that satellite techniques are worth developing for forest inventories, although they are not yet refined enough to be incorporated into current practical inventories.

Justification of the Production Process of Pressed Wood and Study of its Properties

NASA Astrophysics Data System (ADS)

Polilov, A. N.; Dornyak, O. R.; Shamaev, V. A.; Rumachik, M. M.

2018-05-01

Results of a numerical analysis of the stress-strain state of wood during its pressing in different symmetry directions of the anisotropic material are presented. It is shown that the anisotropy of mechanical properties of wood is an important factor determining both the structural characteristics of the porous system and its strength. A mathematical modeling of the process of pressing wood as a three-phase anisotropic rheologically complex capillary-porous system allows one to predict parameters of the resulting wood composite. The compressed wood obtained by the production modes developed has a tensile strength eight times greater than that of the natural one, which is comparable to the strength of the St3 steel, but its specific strength is higher than that of the St45 steel. Compression and impregnation of softwood species with an aqueous solution of carbamide allows one to harden them. This kind of treatment endows the wood with enhanced strength characteristics comparable to the characteristics of the St3 steel. The special features of tensile tests used to estimate the elastic modulus and strength characteristics of such materials are considered. Data obtained by different testing methods are correlated, and characteristics of the strengthened wood and some brends of steel are compared.

Hardwood timber supplies in the United States

Treesearch

William A. Bechtold; Raymond M. Sheffield

1991-01-01

Long recognized for their wildlife, watershed, and aesthetic value, hardwoods are becoming increasingly important from the standpoint of timber production. The abundance of hardwood inventory volume, technological advances allowing greater substitution into softwood markets, and relatively low stumpage prices have generated a growing interest in increased utilization...

Exploring product supply across age classes and forest types

Treesearch

Robert C. Abt; Karen J. Lee; Gerardo Pacheco

1995-01-01

Timber supply modeling has evolved from examining inventory sustainability based on growth/drain relationships to sophisticated inventory and supply models. These analyses have consistently recognized regional, ownership (public/private), and species group (hardwood/softwood) differences. Recognition of product differences is fundamental to market analysis which...

75 FR 16748 - Final Voluntary Product Standard; DOC PS 20-10 “American Softwood Lumber Standard”

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-02

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology [Document Number: 090306279...: National Institute of Standards and Technology, Commerce. ACTION: Notice. SUMMARY: The National Institute of Standards and Technology (NIST) announces voluntary product standard DOC PS 20-10 ``American...

Construction variables considered in fabrication of a structural flakeboard

Treesearch

R.L. Geimer; E.W. Price

1978-01-01

Flake geometry, flake quality, flake alignment, average density, density gradients, layer thicknesses, and resin content were factors considered in determining the final construction details on structural flakeboards made from 1) western softwoods and 2) southern hardwood residues. After making compromises between board properties, a three-layer design was recommended...

Comparison of standing volume estimates using optical dendrometers

Treesearch

Neil A. Clark; Stanley J. Zarnoch; Alexander Clark; Gregory A. Reams

2001-01-01

This study compared height and diameter measurements and volume estimates on 20 hardwood and 20 softwood stems using traditional optical dendrometers, an experimental camera instrument, and mechanical calipers. Multiple comparison tests showed significant differences among the means for lower stem diameters when the camera was used. There were no significant...

Comparison of Standing Volume Estimates Using Optical Dendrometers

Treesearch

Neil A. Clark; Stanley J. Zarnoch; Alexander Clark; Gregory A. Reams

2001-01-01

This study compared height and diameter measurements and volume estimates on 20 hardwood and 20 softwood stems using traditional optical dendrometers, an experimental camera instrument, and mechanical calipers. Multiple comparison tests showed significant differences among the means for lower stem diameters when the camera was used. There were no significant...

Micromechanical measurement of wood substructure properties.

Treesearch

David E. Kretschmann; Troy W. Schmidt; Roderic S. Lakes; Steven M. Cramer

2002-01-01

The annual rings of softwoods are visually obvious and represent cylindrical layers of primarily cellulosic material that possess significantly different properties. For simplicity, wood construction products are designed assuming a material homogeneity that does not exist. As rapidly grown plantation trees are used for wood products, fewer rings are contained in an...

Projecting Timber Inventory at the Product Level

Treesearch

Lawrence Teeter; Xiaoping Zhou

1999-01-01

Current timber inventory projections generally lack information on inventory by product classes. Most models available for inventory projection and linked to supply analyses are limited to projecting aggregate softwood and hardwood. The research presented describes a methodology for distributing the volume on each FIA (USDA Forest Service Forest Inventory and Analysis...

15 CFR 30.54 - Special provisions for imports from Canada.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Canada. 30.54 Section 30.54 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade... Special provisions for imports from Canada. (a) When certain softwood lumber products described under HTSUSA subheadings 4407.1001, 4409.1010, 4409.1090, and 4409.1020 are imported from Canada, import entry...

Primary forest products industry and industrial roundwood production, Michigan, 1969.

Treesearch

James E. Blyth; Allen H. Boelter

1971-01-01

Michigan loggers cut 173.8 million cubic feet of industrial roundwood products in 1969. Ninety percent was pulpwood and saw logs. Production is shifting from softwoods to hardwoods. The number of active primary wood-using mills declined rapidly from 1954 to 1969, but production per mill has expanded.

Alabama's timber resources updated, 1975

Treesearch

Roy C. Beltz

1975-01-01

Alabama has a larger inventory of both softwood and hardwood and a greater output of timber products than any other State in the Midsouth. Forest-related activities comprise a major portion of the State's economy, and forest resources have been assessed intermittently since 1935. The most recent survey was made in 1972 (Murphy 1973).

Interactions between domestic and export markets for softwood lumber and plywood: tests of six hypotheses.

Treesearch

David R. Darr

1981-01-01

Price formation in export markets and available data on export and domestic markets are discussed. The results of tests of several hypotheses about interactions between domestic and export markets are presented and interpreted from the standpoints of trade promotion and trade policy.

Mannose and galactose as substrates for production of itaconic acid by Aspergillus terreus

USDA-ARS?s Scientific Manuscript database

Itaconic acid (IA), an unsaturated 5-carbon dicarboxylic acid, is a building block platform chemical that is currently produced industrially from glucose by fermentation with Aspergillus terreus. Softwood has the potential to serve as low cost source of sugars for its production. Effective utilizati...

Economic analysis of tree improvement: A status report

Treesearch

George F. Dutrow

1974-01-01

Review of current literature establishes that most authors believe that tree improvement expands production, although some point out drawbacks and alternatives. Both softwood and hardwood improvement programs have been analyzed. The authors used various models, economic assumptions, and standards of measurement, but available data were limited. Future models shouId...

Mississippi forest industries, 1976

Treesearch

Daniel F. Bertelson

1976-01-01

Mississippi forests supplied more than 677 million cubic feet of roundwood to forest industries in 1976. This is an increase of 21 percent since 1972 and an increase of 69 percent over the 1966 harvest.Softwoods, mainly pine, made up over 71 percent of the total.Saw logs and pulpwood were the major products...

Occupational exposure to wood dust and risk of nasal and nasopharyngeal cancer: A case-control study among men in four nordic countries-With an emphasis on nasal adenocarcinoma.

PubMed

Siew, Sie Sie; Martinsen, Jan Ivar; Kjaerheim, Kristina; Sparén, Pär; Tryggvadottir, Laufey; Weiderpass, Elisabete; Pukkala, Eero

2017-12-15

The current study aims to provide stronger evidence to aid in our understanding of the role of cumulative occupational exposure to (softwood-dominated) mixed wood dust in aetiology of nasal cancer. We included broad exposure occurred in a range of wood-processing occupation across varied industries in four Nordic countries. A population-based case-control study was conducted on all male cases with nasal adenocarcinoma (393 cases), other types of nasal cancer (2,446) and nasopharyngeal cancer (1,747) diagnosed in Finland, Sweden, Norway and Iceland between 1961 and 2005. For each case, five male controls, who were alive at the time of diagnosis of the case (index date), were randomly selected, matched by birth-year and country. Cumulative exposures (CE)s to wood dust and formaldehyde before the index date were quantified based on a job-exposure matrix linked to occupational titles derived from population censuses. Hazard ratios (HRs) for the CE of wood dust were estimated by conditional logistic regression, adjusted for CE to formaldehyde and 95% confidence intervals (CIs) were calculated. There was an increasing risk of nasal adenocarcinoma related to wood dust exposure. The HR in the highest CE category of wood dust (≥ 28.82 mg/m 3 -years) was 16.5 (95% CI 5.05-54.1). Neither nonadenocarcinoma of the nose nor nasopharyngeal cancer could be linked to wood dust exposure. CE to softwood-dominated mixed wood dusts is strongly linked with elevated risk in nasal adenocarcinoma but not with other types of nasal or nasopharyngeal cancer. © 2017 UICC.

Anaerobic digestion of alkaline bleaching wastewater from a kraft pulp and paper mill using UASB technique.

PubMed

Larsson, Madeleine; Truong, Xu-Bin; Björn, Annika; Ejlertsson, Jörgen; Bastviken, David; Svensson, Bo H; Karlsson, Anna

2015-01-01

Anaerobic digestion of alkaline kraft elemental chlorine-free bleaching wastewater in two mesophilic, lab-scale upflow anaerobic sludge bed reactors resulted in significantly higher biogas production (250±50 vs. 120±30 NmL g [Formula: see text]) and reduction of filtered total organic carbon (fTOC) (60±5 vs. 43±6%) for wastewater from processing of hardwood (HW) compared with softwood (SW). In all cases, the gas production was likely underestimated due to poor gas separation in the reactors. Despite changes in wastewater characteristics, a stable anaerobic process was maintained with hydraulic retention times (HRTs) between 7 and 14 h. Lowering the HRT (from 13.5 to 8.5 h) did not significantly affect the process, and the stable performance at 8.5 h leaves room for further decreases in HRT. The results show that this type of wastewater is suitable for a full-scale implementation, but the difference in methane potential between SW and HW is important to consider both regarding process dimensioning and biogas yield optimization.

Chemicals derived from pyrolysis bio-oils as antioxidants in fuels and lubricants

USDA-ARS?s Scientific Manuscript database

Softwood and hardwood lignins and hardwood were pyrolyzed to produce bio-oils to produce lignin-derived bio-oils of which phenols were the major component. These bio-oils were extracted with alkali to yield a range of lignin-related phenols having molecular weights (MWs) from 110 to 344. When tested...

Ultrasound characteristics of wood fracture surfaces

Treesearch

W.A. Côté; R.B. Hanna

1983-01-01

This study concentrated on the ultrastructural characteristics of hardwood ftacture surfaces, but it included southern yellow pine as a representative softwood for comparison. Very small specimens were made, tested for impression parallel to the grain, tension parallel to the grain, shear in the radial plane and shear in the tangential plane, and were then prepared for...

Prospects for sawtimber output in California's north coast, 1975-2000.

Treesearch

Daniel D. Oswald

1978-01-01

This report summarizes a study of sawtimber output alternatives for California's North Coast. Eleven "scenarios" of softwood sawtimber output from private lands are presented. The scenarios differ as to assumptions about rates and patterns of harvest and objectives pertaining to levels of output. Prospects for output from public lands are also discussed...

Markets and market forces for lumber

Treesearch

Matt Bumgardner; Steven Johnson; William Luppold; Frances Maplesden; Ed. Pepke

2014-01-01

Although lumber is ubiquitous on the international stage, not all lumber is similar or interchangeable in properties, applications, and in the production of potential downstream value-added or secondary wood products. As such, this chapter is divided into the three broadest generally recognized categories of lumber. Section 3.1 focuses on softwood lumber that is mainly...

Chapter 6:Engineered trusses from undervalued hardwoods

Treesearch

Robert J. Ross; Brian K. Brashaw

2005-01-01

A significant volume of softwood lumber is used in engineered truss assemblies. Metal plate connected (MPC) trusses are commonly used in residential construction for both roof and floor applications. Currently, there are no truss manufacturers producing MPC trusses with hardwood lumber, primarily as a consequence of a lack of technical data on the performance of...

An assessment of the industrial markets for softwood clearwood lumber.

Treesearch

Ivan L. Eastin; Christine L. Lane; Roger D. Fight; Jamie Barbour

1998-01-01

The purpose of this project was to assess market opportunities for second growth clearwood lumber by identifying industry segments that currently utilize clearwood lumber and determining whether alternative markets will continue to exist for clearwood lumber produced from intensively managed forests in the Pacific Northwest. A survey of industrial lumber...

Nebraska's forests, 2005

Treesearch

Dacia M. Meneguzzo; Brett J. Butler; Susan J. Crocker; David E. Haugen; W. Keith Moser; Charles H. Perry; Barry T. Wilson; Christopher W. Woodall

2008-01-01

Results of the first annual inventory of Nebraska's forests (2001-05) show an estimated 1.24 million acres of forest land; 1.17 million acres meet the definition of timberland. Softwood forest types account for one-third of all forest land area, with ponderosa pine being the most prevalent type. Hardwood forest types comprise 58 percent of Nebraska's forest...

Forest Health Monitoring in New Hampshire, 1996-1999

Treesearch

Northeastern Research Station

2002-01-01

New Hampshire has mature forests dominated by hardwood species but with significant softwood resources. The majority of the trees are healthy with full crowns (low transparency, high density), little dieback and little damage. Red maple had higher dieback and more damage than other species. Eastern white pine had lower crown densities and little damage.

Forest Health Monitoring in Vermont, 1996-1999

Treesearch

Northeastern Research Station

2002-01-01

Vermont forests vary in size and age class. Trees are distributed evenly between hardwood and softwood species but hardwood dominated the seedling sample. Most of the trees are healthy, with full crowns (low transparency, high density), little dieback and little damage. White and green ash had higher transparencies and lower crown densities possibly explained by the...

19 CFR 12.140 - Entry of softwood lumber products from Canada.

Code of Federal Regulations, 2010 CFR

2010-04-01

... lumber products first produced in the Maritime Provinces from logs originating in a non-Maritime Region will be the Region, as defined above, where the logs originated; and (ii) The Region of Origin of...’) from logs originating outside the Territories will be the Region where the logs originated. (7) SLA...

Missouri's forest resources in 2002.

Treesearch

W. Keith Moser; Gary J. Brand; Thomas Treiman; Bruce Moltzan; Robert Lawrence

2004-01-01

Results of the 2002 annual inventory of Missouri''s forest resources show an estimated 14.5 million acres of forest land. The oak-hickory type is the predominant forest type on the landscape, making up over 70 percent of all forested land. Pinyon-juniper (primarily eastern redcedar) is the primary softwood component by acreage, although shortleaf pine makes...

Missouri's forest resources in 2000

Treesearch

Earl C. Leatherberry; Thomas B. Treiman

2002-01-01

Results of the fifth annual inventory of Missouri show that since 1989 forest land area has increased slightly. The forest is composed predominantly of hardwoods--the oak-hickory forest type alone occupies 71 percent of the timberland area. Softwood occupies 4 percent of timberland area, and the area of eastern redcedar is expanding. Between 1989 and 2000, total...

Projecting housing starts and softwood lumber consumption in the United States

Treesearch

Jeffrey P. Prestemon; David N. Wear; Karen L. Abt; Robert C. Abt

2018-01-01

New residential construction is a primary user of wood products in the United States; therefore, wood products projections require understanding the determinants of housing starts. We model quarterly US total, single-family, and multifamily housing starts with several model specifications, using data from 1979 to 2008, and evaluate their...

Silvicultural guide for northern white-cedar (eastern white cedar)

Treesearch

Emmanuelle Boulfroy; Eric Forget; Philip V. Hofmeyer; Laura S. Kenefic; Catherine Larouche; Guy Lessard; Jean-Martin Lussier; Fred Pinto; Jean-Claude Ruel; Aaron. Weiskittel

2012-01-01

Northern white-cedar (eastern white cedar; Thuja occidentalis L.) is an important tree species in the northeastern United States and adjacent Canada, occurring both in pure stands and as a minor species in mixed stands of hardwoods or other softwoods. Yet practitioners have little and often contradictory information about cedar ecology and...

Sawlog grades for eastern white pine

Treesearch

Myron D. Ostrander; Robert L. Brisbin; Robert L. Brisbin

1971-01-01

In 1957, the USDA Forest Service Log Grade Committee recommended a service-wide action program in log- and tree-grade research. Approval of the program in 1958 resulted in the establishment of five species-oriented timber-quality research projects covering several groups of commercially important timber species. The eastern softwood timber-quality project was activated...

Comparative characterization of extractives in Alaskan Yellow, Eastern Red, and Western Red Cedars

Treesearch

Roderquita K. Moore; Doreen Mann; Gabriel Epstein; Phoebe Wagner; Brett Hinkforth; Jun Hyunji

2017-01-01

Softwoods, more specifically Cedars, are a set of tree species known to have extractive components with many different biological activities. Research has shown that certain compounds in Cedars are able to resist various forms of attack (microbial, fungal, insect, etc.). Juniperus virginiana (Eastern Red Cedar, Cupressus/Chamacyparis...

Moisture barrier properties of xylan composite films

Treesearch

Amit Saxena; Thomas J. Elder; Arthur J. Ragauskas

2011-01-01

Moisture barrier properties of films based on xylan reinforced with several cellulosic resources including nanocrystalline cellulose, acacia bleached kraft pulp fibers and softwood kraft fibers have been evaluated. Measurements of water vapor transmission rate (WVTR) were performed by a modification of the wet cup method described by ASTM E 96-95, indicating that...

Two dimensional finite element heat transfer models for softwood

Treesearch

Hongmei Gu; John F. Hunt

2004-01-01

The anisotropy of wood creates a complex problem for solving heat and mass transfer problems that require analyses be based on fundamental material properties of the wood structure. Most heat transfer models use average thermal properties across either the radial or tangential directions and have not differentiated the effects of cellular alignment, earlywood/latewood...

Georgia's forests, 1997

Treesearch

Michael T. Thompson; Larry W. Thompson

2002-01-01

Since 1989, area of timberland in Georgia increased by less than 1 percent and in 1997 totaled 23.8 million acres. Nonindustrial private forest owners controlled 72 percent of the State's timberland. Volume of softwood growing stock declined 3 percent, whereas hardwood growing-stock volume increased 7 percent to 16.5 billion cubic feet. Net annual growth for...

Ice damage in loblolly pine: understanding the factors that influence susceptibility

Treesearch

Doug P. Aubrey; Mark D. Coleman; David R. Coyle

2007-01-01

Winter ice storms frequently occur in the southeastern United States and can severely damage softwood plantations. In January 2004, a severe storm deposited approximately 2 cm of ice on an intensively managed 4-year-old loblolly pine (Pinus taeda L.) plantation in South Carolina. Existing irrigation and fertilization treatments presented an...

Empirically Derived Optimal Growth Equations For Hardwoods and Softwoods in Arkansas

Treesearch

Don C. Bragg

2002-01-01

Accurate growth projections are critical to reliable forest models, and ecologically based simulators can improve siivicultural predictions because of their sensitivity to change and their capacity to produce long-term forecasts. Potential relative increment (PRI) optimal diameter growth equations for loblolly pine, shortleaf pine, sweetgum, and white oak were fit to...

Association of ring shake in eastern hemlock with tree attributes

Treesearch

John P. Brown; Paul E. Sendak

2006-01-01

Eastern hemlock (Tsuga canadensis (L.) Carr.) is a major or minor associate in many forest types in northeastern North America. There has never been the high level of demand for eastern hemlock lumber that characterizes competing softwoods like white pine and spruce. Nevertheless, periodically interest in greater utilization of eastern hemlock for...

Tree grades for eastern white pine

Treesearch

Robert L. Brisbin; David L. Sonderman; David L. Sonderman

1971-01-01

In 1957 the Forest Service Log Grade Committee recommended a service-wide action program in log and tree grade research. Approval of the program late in 1958 resulted in the establishment of five species-oriented timber- quality research projects covering the several groups of commercially important timber species. The eastern softwood timber-quality project was...

Pallets: A Growing Source of Recycled Wood

Treesearch

Robert J. Bush; Vijay S. Reddy; Philip A. Araman

1997-01-01

Considerable volumes of solid hardwoods, solid softwoods, and wood panels are used to manufacture pallets and containers in the United States. Increasing quantities of these materials are recovered from the waste stream for reuse and recycling. Two important groups involved in this recovery and recycling are firms in the pallet industry (SIC 2448) and landfill...

Characterization of Organosolv Lignins using Thermal and FT-IR Spectroscopic Analysis

Treesearch

Rhea J. Sammons; David P. Harper; Nicole Labbe; Joseph J. Bozell; Thomas Elder; Timothy G. Rials

2013-01-01

A group of biomass-derived lignins isolated using organosolv fractionation was characterized by FT-IR spectral and thermal property analysis coupled with multivariate analysis. The principal component analysis indicated that there were significant variations between the hardwood, softwood, and grass lignins due to the differences in syringyl and guaiacyl units as well...

Southern pulpwood production, 1980

Treesearch

Victor A. Rudis

1980-01-01

Total southern pulpwood production in 1980 was 54.5 million cords, an amount comparable to the 54.3 million cords reported in 1979. This slower growth is in marked contrast to the 3 to 12 percent growth which occurred in the years since 1975 (fig. 1). Softwood roundwood continues to be the most important contributor to annual production.

Dilute alkali pretreatment of softwood pine: A biorefinery approach.

PubMed

Safari, Ali; Karimi, Keikhosro; Shafiei, Marzieh

2017-06-01

Dilute alkali pretreatment was performed on softwood pine to maximize ethanol and biogas production via a biorefinery approach. Alkali pretreatments were performed with 0-2% w/v NaOH at 100-180°C for 1-5h. The liquid fraction of the pretreated substrates was subjected to anaerobic digestion. The solid fraction of the pretreatment was used for separate enzymatic hydrolysis and fermentation. High ethanol yields of 76.9‒78.0% were achieved by pretreatment with 2% (w/v) NaOH at 180°C. The highest biogas yield of 244mL/g volatile solid (at 25°C, 1bar) was achieved by the pretreatment with 1% (w/v) NaOH at 180°C. The highest gasoline equivalent (sum of ethanol and methane) of 197L per ton of pinewood and the lowest ethanol manufacturing cost of 0.75€/L was obtained after pretreatment with 1% NaOH at 180°C for 5h. The manufacturing cost of ethanol from untreated wood was 4.12€/L. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects of Torrefaction Temperature on Pyrolysis Vapor Products of Woody and Herbaceous Feedstocks

DOE PAGES

Starace, Anne K.; Evans, Robert J.; Lee, David D.; ...

2016-06-17

A variety of hardwood, softwood, and herbaceous feedstocks (oak, southern yellow pine mix, loblolly pine, pinyon-juniper mix, and switchgrass) were each torrefied at 200, 250, and 300 °C. Each of the feedstocks was pyrolyzed and the resulting vapors were analyzed with a molecular beam mass spectrometer (py-MBMS). Compositional analysis was used to measure the total lignin content of three of the feedstocks (southern yellow pine, softwood; oak, hardwood; and switchgrass, herbaceous) before and after torrefaction at 300 °C, and large differences in the fraction of lignin lost during torrefaction were found between feedstocks, with oak having the largest decrease inmore » lignin during torrefaction and switchgrass having the least. Finally, it is hypothesized that these differences in the thermal degradation are due to, in part, the different ratios of S, G, and H lignins in the feedstocks. Additionally, the torrefaction of kraft lignin was studied using thermogravimetric analysis coupled with Fourier transform infrared spectroscopy (TGA-FTIR) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR).« less

Optimization of chip size and moisture content to obtain high, combined sugar recovery after sulfur dioxide-catalyzed steam pretreatment of softwood and enzymatic hydrolysis of the cellulosic component.

PubMed

Olsen, Colin; Arantes, Valdeir; Saddler, Jack

2015-01-01

The influence of chip size and moisture content on the combined sugar recovery after steam pretreatment of lodgepole pine and subsequent enzymatic hydrolysis of the cellulosic component were investigated using response surface methodology. Chip size had little influence on sugar recovery after both steam pretreatment and enzymatic hydrolysis. In contrast, the moisture of the chips greatly influenced the relative severity of steam pretreatment and, as a result, the combined sugar recovery from the hemicellulosic and cellulosic fractions. Irrespective of chip size and the pretreatment temperature, time, and SO2 loading that were used, the relative severity of pretreatment was highest at a moisture of 30-40w/w%. However, the predictive model indicated that an elevated moisture content of roughly 50w/w% (about the moisture content of a standard softwood mill chip) would result in the highest, combined sugar recovery (80%) over the widest range of steam pretreatment conditions. Copyright © 2015 Elsevier Ltd. All rights reserved.

Steam explosion pretreatment of softwood: the effect of the explosive decompression on enzymatic digestibility.

PubMed

Pielhop, Thomas; Amgarten, Janick; von Rohr, Philipp Rudolf; Studer, Michael H

2016-01-01

Steam explosion pretreatment has been examined in many studies for enhancing the enzymatic digestibility of lignocellulosic biomass and is currently the most common pretreatment method in commercial biorefineries. The information available about the effect of the explosive decompression on the biochemical conversion is, however, very limited, and no studies prove that the latter is actually enhanced by the explosion. Hence, it is of great value to discern between the effect of the explosion on the one hand and the steaming on the other hand, to identify their particular influences on enzymatic digestibility. The effect of the explosive decompression in the steam explosion pretreatment of spruce wood chips on their enzymatic cellulose digestibility was studied systematically. The explosion had a high influence on digestibility, improving it by up to 90 % compared to a steam pretreatment without explosion. Two factors were identified to be essentially responsible for the effect of the explosion on enzymatic digestibility: pretreatment severity and pressure difference of the explosion. A higher pretreatment severity can soften up and weaken the lignocellulose structure more, so that the explosion can better break up the biomass and decrease its particle size, which enhances its digestibility. In particular, increasing the pressure difference of the explosion leads to more defibration, a smaller particle size and a better digestibility. Though differences were found in the micro- and nanostructure of exploded and non-exploded biomass, the only influence of the explosion on digestibility was found to be the macroscopic particle size reduction. Steam explosion treatments with a high severity and a high pressure difference of the explosion lead to a comparatively high cellulose digestibility of the-typically very recalcitrant-softwood biomass. This is the first study to show that explosion can enhance the enzymatic digestibility of lignocellulosic biomass. If the enhancing effect of the explosion is thoroughly exploited, even very recalcitrant biomass like softwood can be made enzymatically digestible.

Timber, Browse, and Herbage on Selected Loblolly-Shortleaf Pine-Hardwood Forest Stands

Treesearch

Gale L. Wolters; Alton Martin; Warren P. Clary

1977-01-01

A thorough vegetation inventory was made on loblolly-shortleaf pine-hardwood stands scheduled by forest industry for clearcutting, site preparation, and planting to pine in north central Louisiana and southern Arkansas. Overstory timber, on the average, contained about equal proportions of softwood and hardwood basal area. Browse plants ranged from 5,500 to over 70,...

Forest Health Monitoring in Maine, 1996-1999.

Treesearch

Northeastern Research Station

2002-01-01

Maine has mixed-age forests dominated by softwood species. Most of the trees are healthy, with full crowns (low transparency, high density), little dieback and little damage. Red maple had higher amounts of dieback but seemed to maintain crown fullness. Eastern white pine and northern white cedar had lower densities as well as higher rates of damage.

Relation of Tolerant Species to Habitat in the White Mountains of New Hampshire

Treesearch

W. B. Leak

1976-01-01

The occurrence of red spruce, hemlock, beech, and sugar maple stands was related to habitat classified by substratum (generally C horizon or parent material), drainage, aspect, and elevation. Softwoods were found on rocky, outwashed, compacted, and poorly drained substrata; hardwoods were common on open glacial tills. Species was related to climate and apparent...

Forest vegetation related to elevation in the White Mountains of New Hampshire

Treesearch

William B. Leak; Raymond E. Graber

1974-01-01

Maximum tree size and species composition are related to elevation on Mount Washington (disturbed by logging) and Mount Whiteface (uncut) in the White Mountains of New Hampshire. Species migrational trends and differences between the two mountains in species elevational limits indicate that both hardwoods and softwoods will move to higher elevations in areas where...

Lake States Roundwood Pulpwood Markets: A Short-Term Outlook

Treesearch

David C. Lothner

1974-01-01

Recent changes in the behavios of factors influencing the Lake States roundwood pulpwood market indicate there is potential for change within the pulpwood market. Softwood roundwood pulpwood production could increase at an annual rate of near 2 percent, while all roundwood pulpwood production could moderate to an average annual rate of near 1 percent over the short-...

Acoustic evaluation of wood quality in standing trees. Part I, Acoustic wave behavior

Treesearch

Xiping Wang; Robert J. Ross; Peter Carter

2007-01-01

Acoustic wave velocities in standing trees or live softwood species were measured by the time-of-flight (TOF) method. Tree velocities were compared with acoustic velocities measured in corresponding butt logs through a resonance acoustic method. The experimental data showed a skewed relationship between tree and log acoustic measurements. For most trees tested,...

Pine growth reductions in the Southeast

Treesearch

Raymond M. Sheffield; Noel D. Cost; William A. Bechtold; Joe P. McClure

1985-01-01

Periodic timber inventories in the Southeastern United States indicate that net annual growth of softwood timber there has peaked and turned downward after a long upward trend. The most pronounced declines have been measured in the growth of the yellow pines on nonindustrial private forest land, which accounts for about 69 percent of the timberland in this five-state...

Midcycle survey of Arkansas' forest resources

Treesearch

Roy C. Beltz; Randall Leister; Walter R. Smith

1987-01-01

This report summarizes an interim survey of Arkansas’ forest resources. Field work was completed in April 1985. The survey provides new estimates of forest area and inventory for both the State’s softwoods and hardwoods. This survey was cooperative effort with the Arkansas forestry commission, the soil conservation service, the statistical reporting service, and the...

Influence of Lumber Volume Maximization in Sawing Hardwood Sawlogs

Treesearch

Philip H. Steele; Francis G. Wagner; Lalit Kumar; Philip A. Araman

1993-01-01

The Best Opening Face (BOF) technology for volume maximization during sawing has been rapidly adopted by softwood sawmills. Application of this technology in hardwood sawmills has been limited because of their emphasis on sawing for the highest possible grade of lumber. The reason for this emphasis is that there is a relatively large difference in price between the...

Forest Health Monitoring in New York, 1996-1999

Treesearch

Northeastern Research Station

2002-01-01

New York has mature forests dominated by hardwood species, but with a significant and varied softwood resource. Most of the trees are healthy, with full crowns (low transparency, high density), little dieback and little damage. American beech tends to be in poorer condition, with thin crowns, higher dieback, and more damage, especially broken and dead branches.

Estimating the board foot to cubic foot ratio

Treesearch

Steve P. Verrill; Victoria L. Herian; Henry N. Spelter

2004-01-01

Certain issues in recent softwood lumber trade negotiations have centered on the method for converting estimates of timber volumes reported in cubic meters to board feet. Such conversions depend on many factors; three of the most important of these are log length, diameter, and taper. Average log diameters vary by region and have declined in the western United States...

Status and trends : profile of structural panels in the United States and Canada

Treesearch

Henry Spelter; David McKeever; Matthew Alderman

2006-01-01

This paper provides an overview of the North American (United States and Canada) structural panel industry, which consists of softwood plywood and oriented strandboard (OSB). The paper describes the evolution of overall capacities, effective capacity utilization, and manufacturing costs. As part of that, it describes changes in industry operating parameters such as...

78 FR 77329 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order; Changes...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-23

...); adds flexibility for the Board to nominate eligible persons to fill vacancies that occur during a term... operate (U.S. or import); add flexibility for the Board to nominate eligible persons to fill vacancies... and Border Protection. 2010 and 2011 U.S. data is from Forest Economic Advisors. It is noted that for...

Veneer, 1976 - a periodic assessment of regional timber output

Treesearch

James T. Bones; David R. Dickson

1978-01-01

The 1976 veneer industry survey in the Northeast showed that since the 1972 survey: Veneer log production rose 5 percent to 132 million board feet. Veneer log receipts at northeastern veneer plants dropped less than 1 percent. There were seven fewer veneer plants operating in the Northeast; new softwood plywood plant will be consuming northeastern timber. Exports of...

Controlling mold on wood Pallets

Treesearch

Carol A. Clausen

2012-01-01

THE WOOD PALLET AND CONTAINER INDUSTRY CONSUMES 4.5 billion board feet (BBF) of hardwoods and 1.8 BBF of softwoods for the annual production of 400-500 million solid wood pallets. While alternative materials such as plastic, corrugated paperboard and metal have entered the market, solid wood remains the material of choice for a majority of pallets on the market (more...

Two projections of timber supply in the Pacific coast states.

Treesearch

Donald R. Gedney; Daniel D. Oswald; Roger D. Fight

1975-01-01

Two projections of softwood timber supply for 1970-2020 for California, western Oregon, eastern Oregon, western Washington, eastern Washington, and coastal Alaska are presented. One projection shows how much timber will likely be available in the future if forest management continues at recent levels. The second projection shows the impact of one program of intensified...

Clearwood quality and softwood lumber prices: what's the real premium?

Treesearch

Thomas R. Waggener; Roger D. Fight

1999-01-01

Diminishing quantities of appearance grade lumber and rising price premiums for it have accompanied the transition from old-growth to young-growth timber. The price premiums for better grades are an incentive for producers to undertake investments to increase the yield of those higher valued products. Price premiums, however, are also an incentive for users to...

Nebraska's Forest Resources in 2005

Treesearch

Dacia M. Meneguzzo; Gary J. Brand; William R. Lovett

2007-01-01

Results of the 2005 annual inventory of Nebraska show an estimated 1.24 million acres of forest land. Softwoods comprise one-third of this forested area, with ponderosa pine being the primary component by acreage and volume. Hardwoods comprise more than half (58 percent) of all forested acreage. Overall, the elm/ash/cottonwood type is the predominant forest-type group...

Indiana's forest resources in 2002.

Treesearch

W. Keith Moser; Gary J. Brand; Philip T. Marshall; Joey Gallion

2004-01-01

Results of the 2002 annual inventory of Indiana show 4.5 million acres of forest land. The oak-hickory type is the largest forest type on the landscape, making up over 46.5 percent of all forested land. Softwoods (or "conifers") comprise approximately 2.5 percent of Indiana''s forested acreage. Between 1998 and 1999-2002, the net volume of all live...

Kansas' Forests 2010

Treesearch

W. Keith Moser; Mark H. Hansen; Robert L. Atchison; Brett J. Butler; Susan J. Crocker; Grant Domke; Cassandra M. Kurtz; Andrew Lister; Patrick D. Miles; Mark D. Nelson; Ronald J. Piva; Christopher W. Woodall

2013-01-01

The second completed annual inventory of Kansas' forests reports 2.4 million acres of forest land, roughly 5 percent of the total land area in the State. Softwood forests account for 4.4 percent of the total timberland area. Oak/hickory forest types make up 55 percent of the total hardwood forest land area. Elm/ash/cottonwood accounts for more than 32 percent of...

Forest statistics for South Carolina, 1993

Treesearch

Roger C. Conner

1993-01-01

Since 1986, area of timberland in South Carolina increased 2 percent to 12.4 million acres. Nonindustrial private forest landowners control 72 percent of the State's timberland. Area of softwood forest types increased 2 percent to over 5.5 million acres. More than 279,000 acres were harvested annually, while 372,000 acres were regenerated by artificial and natural...

Metrication of the United States Lumber Industry and Its Effects on Wood Consuming Industrial Education Courses.

ERIC Educational Resources Information Center

Craemer, Peter J.

A study investigated the direction United States lumber industries are moving concerning the implementation of the metric system and what implications this has concerning wood consuming industrial education courses. The procedure included a literature review and investigating the major producers of softwood dimensional lumber by a detailed survey…

Missouri's forests 1999-2003 (Part A)

Treesearch

W. Keith Moser; Mark H. Hansen; Thomas B. Treiman; Earl C. Leatherberry; Ed Jepsen; Cassandra L. Olson; Charles H. Perry; Ronald J. Piva; Christopher W. Woodall; Gary J. Brand

2007-01-01

The first completed annual inventory of Missouri's forests reports more than 14.6 million acres of forest land. Softwood forests make up 4 percent of the total forest land area; oak/hickory forest types make up about three-fourths of the total hardwood forest land area. Missouri's forests have continued to increase in volume, with all-live tree volume on...

Forest statistics for Georgia, 1989

Treesearch

Michael T. Thompson

1989-01-01

Since 1982, area of timberland in Georgia has declined by about 102,000 acres to 23.6 million acres. Nonindustrial private owners control 68 percent of the State's timberland. New pine stands established by artificial and natural means exceeded the area of pine harvested by over 3 percent. Number of softwood stems declined in all diameter classes through the 14-...

Influence of kraft pulping on carboxylate content of softwood kraft pulps

Treesearch

Zheng Dang; Thomas Elder; Arthur J. Ragauskas

2006-01-01

This study characterizes changes in fiber charge, which is the carboxylate content of fibers, for two sets of kraft pulps: (1) conventional laboratory cooked loblolly pine kraft pulps and (2) conventional pulping (CK) versus low solids pulping (LS) pulps. Laboratory kraft pulping of loblolly pine was carried out to study the influence of pulping conditions, including...

Rating spruce-fir silviculture for wildlife and forestry

Treesearch

H.S. Crawford; R.M. Frank

1985-01-01

Forest managers face a wide array of potential choices when they consider all of the products derived from woodlands. Many of these products compete with one another to some degree. For instance, hardwood regeneration may be removed in thinnings to favor softwood growth. Forest wildlife-is also influenced by silvicultural practice and the manager must decide whether to...

Early Season Softwood Cuttings Effective for Vegetative Propagation of Juglans cinerea

Treesearch

Paula M. Pijut; Melanie Moore

2002-01-01

Juglans cinerea L. (butternut) is a hardwood species valued for its wood and edible nuts. Information on the vegetative propagation of this species is currently unavailable. Our objective was to determine the conditions necessary for successful stem-cutting propagation of butternut. In 1999 and 2000, 10 trees (each year) were randomly selected from a...

Understanding chain-of-custody certification in the Appalachian hardwood region: Primary manufacturers' practices and perceptions

Treesearch

Iris B. Montague

2011-01-01

Many obstacles may deter hardwood manufacturers from obtaining chain-of-custody certification. Because the hardwood and softwood forest products industries have many differences between them, current certification systems may not fit the unique demographics of the hardwood industry. For this reason, it is important to understand chain-of-custody certification as it...

Two-dimensional finite element heat transfer model of softwood. Part I, Effective thermal conductivity

Treesearch

John F. Hunt; Hongmei Gu

2006-01-01

The anisotropy of wood complicates solution of heat and mass transfer problems that require analyses be based on fundamental material properties of the wood structure. Most heat transfer models use average thermal properties across either the radial or tangential direction and do not differentiate the effects of cellular alignment, earlywood/latewood differences, or...

Best opening face system for sweepy, eccentric logs : a user’s guide

Treesearch

David W. Lewis

1985-01-01

Log breakdown simulation models have gained rapid acceptance within the sawmill industry in the last 15 years. Although they have many advantages over traditional decision making tools, the existing models do not calculate yield correctly when used to simulate the breakdown of eccentric, sweepy logs in North American sawmills producing softwood dimension lumber. In an...

Changes in wood microstructure through progressive stages of decay

Treesearch

W. Wayne Wilcox

1968-01-01

Successive stages of decay in the sapwood of sweetgum (Liquidambar styraciflua L.), a hardwood, and of southern pine (Pinus sp.), a softwood, were observed microscopically. The white-rot fungus. Polyporus versicolor L., and the brown-rot fungus, Poria monticola Murr., were the fungi used or the observations, light microscopy, plus the techniques of polarization and...

Utilization of softwood kraft lignin as adhsive for the manufacture of reconstituted wood

Treesearch

Lin-Wu Zhao; Bruce F. Griggs; Chen-Loung Chen; Josef S. Gratzl; Chung-Yun Hse

1994-01-01

Reaction conditions for hydroxymethylation of pine kraft lignin (KL) were optimized by kinetic studies of the reaction. Characterization of the resulting hydroxymethylated kraft lignin (HMKL) indicated that about 0.36 mole of the -CH2OH/C9 unit was introduced into the ognin under the optimal reaction conditions, of which...

Forest statistics for Central Georgia, 1989

Treesearch

Michael T. Thompson

1989-01-01

Since 1982, area of timberland in Central Georgia has increased 2.5 percent and now totals 7.2 million acres. Nonindustrial private owners control 68 percent of the region's timberland. The annual rate of stand regeneration more than doubled and averaged more than 217,000 acres each year. Number of live 2-inch softwood trees increased 17 percent. Volume of...

Craftsmen say "we want edge-glued, standard-size panels"

Treesearch

Philip A. Araman; Hugh W. Reynolds

1983-01-01

Wood craftsmen would like an alternative to hardwood lumber and plywood and softwood products. They are very interested in edge-glued, standard-size panels. These conclusions are based on interviews with craftsmen at two trade shows, and the results are included in this report along with our recommendations for optimum acceptance by craftsmen of this new product.

Wood-based panel plant locations and timber availability in selected U.S. states

Treesearch

T. McKeever; H. N. Spelter

1998-01-01

This report lists wood-based panel industry plant locations, production capacities, timber inventories, and wood costs for 24 U.S. states. Industry sectors covered include medium-density fiberboard, particleboard, softwood plywood, and oriented strandboard. Maps of major forest producing states show plant locations and the underlying density of timber stocking by...

Southern pulpwood production, 1976

Treesearch

Daniel F. Bertelson

1977-01-01

Total southern pulpwood production in 1976 amounted to 47.4 million cords (table 1). This is an increase of 5 million cords or 12 percent more than the previous year and less than 2 million cords below the 1974 record output. Softwood residues accounted for 52 percent of the increase, and hardwood roundwood added another 22 percent to the total gain.

Arkansas forest industries, 1977

Treesearch

Daniel F. Bertelson

1980-01-01

Arkansas forests supplied more than 516 million cubic feet of roundwood to forest industries in 1977. This is an increase of 15 percent since 1971 and an increase of 32 percent over the 1968 harvest. Softwoods, mainly pine, made up almost three-fourths of the total. Sawlogs and pulpwood were the major products, accounting for 88 percent of the harvest. Veneer logs...

Wood Use in the U.S. Pallet and Container Industry: 1995

Treesearch

Vijay S. Reddy; Robert J. Bush; Matthew S. Bumgardner; James L. Chamberlain; Philip A. Araman

1997-01-01

This report from the Center for Forest Products Marketing and Management at Virginia Tech provides results of a study ofwood material use in the pallet and container industry (Standard Industrial Classification codes 2441, 2448, and 2449). The report furnishes estimates of industry-wide use ofvarious wood materials (i.e., solid hardwood, solid softwood,oriented strand...

Electrochemical delignification of wood pulp using polyoxometalate mediators

Treesearch

R.S. Reiner; E.L. Springer; R.H. Atalla

2003-01-01

It has been found that polyoxometalates (POMs) can act as mediators in the electrochemical oxidation of lignin in pulps. An electrochemical cell, with a Nafion® membrane separating the anode and cathode compartments, was used in the delignification experiments. A softwood kraft pulp was placed in the anode compartment with a buffered 0.01M solution of the...

Effects of habitat on stand productivity in the White Mountains of New Hampshire

Treesearch

William B. Leak

1979-01-01

Mean annual biomass production of sapling stands was higher on washed tills, which have a hardwood climax, than on habitats having a softwood climax. However, biomass production of poletimber stands did not differ significantly among habitats. Apparently, differences among habitats in characteristics species composition tends to mask differences in biomass productivity...

East Texas pineywoods

Treesearch

Herbert S. Sternitzke

1967-01-01

Pine timber volume in east Texas has risen sharply since the middle 1950's. The forests now support 6.3 billion cubic feet in softwood growing stock trees at least 5 inches in diameter. This volume-nearly all southern yellow pine but including a little cypress and eastern redcedar-is some 40 percent greater than that recorded in the previous survey of 1955. The...

Shaping-lathe headrig will stretch shrinking timber supply

Treesearch

J. Gengler; J.D. Saul

1975-01-01

The first commercial version of the shaping lathe headrig, designed to machine short hardwood or softwood logs into cants and flakes, was introduced to forest industry executives in September during a working demonstration at Stetson-Ross Machine Co., Seattle. Based on a concept provided by Dr. Peter Koch, chief wood scientist at the Southern Forest Experiment Station...

76 FR 46185 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-02

...\\ Micklewright, J.T., Wood preservation statistics, American Wood Preservers Assocation, p. 25. Most of the... wood. The bulk of timber production in the western United States is on the coast of the Pacific... were from the Northeast and Lake States. Data for the western states is from the Western Wood Products...

Forest statistics for North Georgia, 1989

Treesearch

Mark J. Brown; Michael T. Thompson

1989-01-01

Since 1983, area of timberland in North Georgia has decreased by 5 percent and now totals almost 3.0 million acres. Nonindustrial private owners account for two-thirds of the region's timberland. The annual rate of planting experienced a fourfold increase over the previous rate and averaged 22,000 acreas each year. Volume of softwood growing stock fell by 6...

Alaska softwood market price arbitrage.

Treesearch

James A. Stevens; David J. Brooks

2003-01-01

This study formally tests the hypothesis that markets for Alaska lumber and logs are integrated with those of similar products from the U.S. Pacific Northwest and Canada. The prices from these three supply regions are tested in a common demand market (Japan). Cointegration tests are run on paired log and lumber data. Our results support the conclusion that western...

Kraft pulping of industrial wood waste

Treesearch

Aziz Ahmed; Masood Akhtar; Gary C. Myers; Gary M. Scott

1998-01-01

Most of the approximately 25 to 30 million tons of industrial wood waste generated in the United States per year is burned for energy and/or landfilled. In this study, kraft pulp from industrial wood waste was evaluated and compared with softwood (loblolly pine, Douglas-fir) and hardwood (aspen) pulp. Pulp bleachability was also evaluated. Compared to loblolly pine...

SOLVE: a computer program for determining the maximum value of hardwood sawlogs

Treesearch

Edward L. Adams; Edward L. Adams

1972-01-01

This paper presents the SOLVE system in detail as an aid to users who might want to make changes in the program. These changes might include: (1) adapting the program to a softwood sawmill; (2) consideration of products other than chips, lumber, and sawed timber; and (3) adapting the program to new data and procedures.

Determination of ethylenic residues in wood and TMP of spruce by FT-Raman spectroscopy

Treesearch

Umesh P. Agarwal; Sally A. Ralph

2008-01-01

A method based on FT-Raman spectroscopy is proposed for determining in situ concentrations of ethylenic residues in softwood lignin. Raman contributions at 1133 and 1654 cm-1, representing coniferaldehyde and coniferyl alcohol structures, respectively, were used in quantifying these units in spruce wood with subsequent conversion to concentrations in lignin. For...

Modeling aspen cover type diameter distributions in Minnesota

Treesearch

Curtis L. VanderSchaaf

2015-01-01

An attempt was made to model diameter distributions of aspen (Populus spp) stands. The aspen (1,020,150 acres) cover type has the greatest acreage on DNR lands and it contains a variety of hardwood and softwood species. Aspen is a valuable pulpwood species, annually comprising around 50 percent of total timber harvest on DNR lands....

Arkansas forest industries, 1971

Treesearch

Daniel F. Bertelson

1973-01-01

Arkansas forests supplied more than 451 million cubic feet of roundwood to forest industries in 1971. Softwoods, mainly pine, made up more than two-thirds of the total. The timber harvest increased 15 percent during the years 1969-1971, while the number of primary wood-using plants decreased. Saw logs and pulpwood comprised 83 percent of the roundwood. Veneer logs made...

Arkansas Forests, 1988 - 1996: Highlights Of The Timberland Resource From The Seventh Forest Survey Of Arkansas

Treesearch

James F. Rosson

2001-01-01

Abstract - Highlights of the seventh forest survey of Arkansas are presented. Key elements important in assessing the sustainability of the forest resource are discussed. These include forest area, volume, growth, removals, and status of softwood plantations. Forest area and volumes appear stable or increasing or both. However, the amount of...

Effect of hot water extracted hardwood and softwood chips on particleboard properties

Treesearch

Manuel Raul Pelaez-Samaniego; Vikram Yadama; Tsai Garcia-Perez; Eini Lowell; Thomas Amidon

2014-01-01

The affinity of particleboard (PB) to water is one of the main limitations for using PB in moisture-rich environments. PB dimensional stability and durability can be improved by reducing the available hydroxyl groups in wood through hemicellulose removal, for example, by hot water extraction (HWE), which increases wood resistance to moisture uptake. The resulting...

Development of a size reduction equation for woody biomass: The influence of branch wood properties on Rittinger's constant

DOE PAGES

Naimi, Ladan J.; Sokhansanj, Shahabaddine; Bi, Xiaotao; ...

2015-11-25

Size reduction is an essential but energy-intensive process for preparing biomass for conversion processes. Three well-known scaling equations (Bond, Kick, and Rittinger) are used to estimate energy input for grinding minerals and food particles. Previous studies have shown that the Rittinger equation has the best fit to predict energy input for grinding cellulosic biomass. In the Rittinger equation, Rittinger's constant (k R) is independent of the size of ground particles, yet we noted large variations in k R among similar particle size ranges. In this research, the dependence of k R on the physical structure and chemical composition of amore » number of woody materials was explored. Branches from two softwood species (Douglas fir and pine) and two hardwood species (aspen and poplar) were ground in a laboratory knife mill. The recorded data included power input, mass flow rate, and particle size before and after grinding. Nine material properties were determined: particle density, solid density (pycnometer and x-ray diffraction methods), microfibril angle, fiber coarseness, fiber length, and composition (lignin and cellulose glucan contents). The correlation matrix among the nine properties revealed high degrees of interdependence between properties. The k R value had the largest positive correlation (+0.60) with particle porosity across the species tested. As a result, particle density was strongly correlated with lignin content (0.85), microfibril angle (0.71), fiber length (0.87), and fiber coarseness (0.78). An empirical model relating k R to particle density was developed.« less

Development of a size reduction equation for woody biomass: The influence of branch wood properties on Rittinger's constant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naimi, Ladan J.; Sokhansanj, Shahabaddine; Bi, Xiaotao

Size reduction is an essential but energy-intensive process for preparing biomass for conversion processes. Three well-known scaling equations (Bond, Kick, and Rittinger) are used to estimate energy input for grinding minerals and food particles. Previous studies have shown that the Rittinger equation has the best fit to predict energy input for grinding cellulosic biomass. In the Rittinger equation, Rittinger's constant (k R) is independent of the size of ground particles, yet we noted large variations in k R among similar particle size ranges. In this research, the dependence of k R on the physical structure and chemical composition of amore » number of woody materials was explored. Branches from two softwood species (Douglas fir and pine) and two hardwood species (aspen and poplar) were ground in a laboratory knife mill. The recorded data included power input, mass flow rate, and particle size before and after grinding. Nine material properties were determined: particle density, solid density (pycnometer and x-ray diffraction methods), microfibril angle, fiber coarseness, fiber length, and composition (lignin and cellulose glucan contents). The correlation matrix among the nine properties revealed high degrees of interdependence between properties. The k R value had the largest positive correlation (+0.60) with particle porosity across the species tested. As a result, particle density was strongly correlated with lignin content (0.85), microfibril angle (0.71), fiber length (0.87), and fiber coarseness (0.78). An empirical model relating k R to particle density was developed.« less

Forest statistics for Central Florida - 1970

Treesearch

Nolan L. Snyder; Herbert A. Knight

1970-01-01

Since 1959, area of commercial forest in Central Florida has declined from 3.2 to 2.7 million acres, or 16 percent, excluding the reclassification of 1.7 million acres from non-stocked forest to natural rangeland. Some 589,400 acres were actually diverted from commercial forest to other land uses, while only 56,400 acres of new forest were added. Volume of softwood...

Pacific Rim log trade: determinants and trends.

Treesearch

Donald F. Flora; Andrea L. Anderson; Wendy J. McGinnls

1991-01-01

Pacific Rim trade in softwood logs amounts to about $3 billion annually, of which the U.S. share is about $2 billion. Log exporting is a significant part of the forest economy in the Pacific Northwest. The 10 major Pacific Rim log-trading client and competitor countries differ widely in their roles in trade and in their policies affecting the industry.

Forest statistics for Southwest Georgia, 1971

Treesearch

Herbert A. Knight

1971-01-01

Acreage of commercial forest land in this 22-county area has declined by 180,000 acres. or almost 6 percent, since 1960. Over this same period, volume of growing-stock timber increased by 581 million cubic feet, or almost 27 percent, reversing a downward trend in volume between 1951 and 1960. Softwoods have accounted for 85 percent of this net gain in volume. In 1970...

Prediction and measurement of thermally induced cambial tissue necrosis in tree stems

Treesearch

Joshua L. Jones; Brent W. Webb; Bret W. Butler; Matthew B. Dickinson; Daniel Jimenez; James Reardon; Anthony S. Bova

2006-01-01

A model for fire-induced heating in tree stems is linked to a recently reported model for tissue necrosis. The combined model produces cambial tissue necrosis predictions in a tree stem as a function of heating rate, heating time, tree species, and stem diameter. Model accuracy is evaluated by comparison with experimental measurements in two hardwood and two softwood...

An FT-raman study of softwood, hardwood, and chemically modified black spruce MWLS

Treesearch

Umesh P. Agarwal; James D. McSweeny; Sally A. Ralph

1999-01-01

Raman spectroscopy is being increasingly used to carry out in situ analysis of wood and other lignocellulosics. To obtain useful information from the spectra, the vibrational bands need to be assigned in terms of contributions from various chemical components and component sub-structures. In additional, so that the technique can be better applied as an analytical...

Costs and regional impacts of restoration thinning programs on the national forests in eastern Oregon.

Treesearch

Darius M. Adams; Gregory S. Latta

2005-01-01

An intertemporal spatial equilibrium model of the eastern Oregon softwood log market was employed to estimate the market and economic welfare impacts of restoration thinning programs established on national forests in the region. Programs treated only lands with sawtimber thinning volume and varied by the extent of public subsidies for costs, the types of costs that...

78 FR 58956 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order; Changes...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-25

... in any region in which they operate (U.S. or import); add flexibility for the Board to nominate... they operate (U.S. or import); add flexibility for the Board to nominate eligible persons to fill... and Border Protection. 2010 and 2011 U.S. data is from Forest Economic Advisors. It is noted that for...

Wood used in residential repair and remodeling in the United States, 2014

Treesearch

Joe Elling; David B. McKeever

2018-01-01

The repair, remodeling, and renovation of existing residential structures and properties has been, and continues to be, a vital market for the use of wood products in the United States. This market is either the first or second largest market (alternating with new residential construction) for a number of wood products including softwood lumber, engineered wood...

Estimators and characteristics of logging residue in California.

Treesearch

James O. Howard; Julianne K. Bulgrin

1986-01-01

Ratios are presented for estimating volume and characteristics of logging residue in California. The ratios relate cubic-foot volume of residue to thousand board feet of timber harvested and to acres harvested. Tables show gross and net volume of residue, with and without bark, by diameter and length classes, by number of pieces per acre, by softwoods and hardwoods, by...

Economic impacts of interregional competition in the forest products industry during the 1970's: the South and the Pacific Northwest.

Treesearch

Con H. Schallau; Wilbur R. Maki

1986-01-01

Until the 1970's, the Pacific Northwest dominated national markets for softwood lumber and plywood. During the 1970's, however, the region's share declined while production increased in the South. Meanwhile, the South's and the Pacific Northwest's shares of the Nation's employment in lumber and wood products declined. This resulted mainly...

Nutrient concentration of down woody debris in mixedwood forests in central Maine, USA

Treesearch

Mike R. Saunders; Shawn Fraver; Robert G. Wagner

2011-01-01

Both nutrient concentrations and pre- and post-harvest pool sizes were determined across down woody debris decay classes of several hardwood and softwood species in a long-term, natural disturbance based, silvicultural experiment in central Maine. Concentrations of N, P, Ca, Mg, Cu, Fe, and Zn generally increased 2- to 5-fold with increasing decay class. Concentrations...

Kansas's forest resources in 2002

Treesearch

W. Keith Moser; Robert L. Atchison; Gary J. Brand

2004-01-01

Results of the 2002 annual inventory of Kansas shows an estimated 2.2 million acres of forest land. The oak-hickory type is the most widespread forest type on the landscape, covering over 45.4 percent of all forested land. Softwoods make up approximately 6.4 percent of Kansas's forested acreage. In 2001-2002, the net volume of all live trees and salvable dead...

Kansas' forest resources in 2004

Treesearch

W. Keith Moser; Mark H. Hansen; Gary J. Brand; Melissa Powers

2006-01-01

Presents some of the major findings of the first 4 years of the fifth inventory of Kansas' forest resources. Since 1994, total forest land area has increased by more than 580,000 acres, to 2,126,100 acres. As with earlier inventories, oak/hickory is the largest forest type on the landscape, making up more than 52.3 percent of all forested land. Softwoods make up...

Kansas forests 2005

Treesearch

W. Keith Moser; Mark H. Hansen; Robert L. Atchison; Gary J. Brand; Brett J. Butler; Susan J. Crocker; Dacia M. Meneguzzo; Mark D. Nelson; Charles H. Perry; William H. IV Reading; Barry T. Wilson; Christopher W. Woodall

2008-01-01

The first completed annual inventory of Kansas forests reports 2.1 million acres of forest land, roughly 4 percent of the total land area in the State. Softwood forests account for nearly 5 percent of the total timberland area. Oak/hickory forest types make up 56 percent of the total hardwood forest land area. Elm/ash/cottonwood accounts for more than 30 percent of the...

Quality drying of softwood lumber : guidebook - checklist

Treesearch

M. R. Milota; J. D. Danielson; R. S. Boone; D. W. Huber

The IMPROVE Lumber Drying Program is intended to increase awareness of the lumber drying system as a critical component in the manufacture of quality lumber. One objective of the program is to provide easy-to-use tools that a kiln operator can use to maintain an efficient kiln operation and therefore contribute to lumber drying quality. This report is one component of...

Large scale softwood planting operations in New Brunswick

Treesearch

M. K. Barteaux

1977-01-01

New Brunswick is presently planting 20,000 ac. per year and expects to be planting nearly 60,000 ac. per year by 1979. Total productive forest area is 15,000,000 acres. The program is directly related to projected industrial demand and other forest uses. Plantations are established by scarification and planting of paper pot containers and bare root stock.

The identification of Douglas-fir wood

Treesearch

Forest Products Laboratory (U.S.)

1963-01-01

Douglas-fir is one of the largest, most abundant and widely distributed species of trees native to North America, and next to the southern yellow pines, it is cut in the greatest quantities of any wood of commercial importance. It belongs to the coniferous family and is, therefore, a softwood. Other names for Douglas -fir are red fir, yellow fir, Oregon pine, Puget...

Chemical Changes during Anaerobic Decomposition of Hardwood, Softwood, and Old Newsprint under Mesophilic and Thermophilic Conditions

Treesearch

Florentino B. De la Cruz; Daniel J. Yelle; Hanna S. Gracz; Morton A. Barlaz

2014-01-01

The anaerobic decomposition of plant biomass is an important aspect of global organic carbon cycling. While the anaerobic metabolism of cellulose and hemicelluloses to methane and carbon dioxide are well-understood, evidence for the initial stages of lignin decomposition is fragmentary. The objective of this study was to look for evidence of chemical transformations of...

From Preconceived Perceptions to Purchasing Realities, Species Names Carry Powerful Marketing Images (an editorial)

Treesearch

Matt Bumgardner; Scott Bowe; Scott Bowe

2002-01-01

Hardwood product marketing has certainly evolved over the years. Twenty years ago, we promoted, hardwoods over softwoods, for their durability, strength and stature. Then we focused on solid wood products as better than engineered or veneered products. With the emergence of so many tropical substitutes, we focused on North American hardwoods as the right choice,...

A preview of West Virginia's forest resource

Treesearch

Joseph E. Barnard; Teresa M. Bowers

1977-01-01

Forest land occupies 75 percent of the total land area of West Virginia. Sixty percent of the forest land is classified in the oak-hickory forest type and only 6 percent in all the softwood forest types. Since 1961, growing-stock volume increased 24 percent. Yellow-poplar increased 39 percent in volume and is now the prevalent species in the State.

Price transmission between products at different stages of manufacturing in forest industries

Treesearch

Mo Zhou; Joseph Buongiorno

2005-01-01

The theory of demand and supply implies a positive relationship, or "price transmission" between the prices of products at different stages of manufacturing, This relationship was investigated with quarterly prices of softwood stumpage in the US South, and national prices of forest products, from 1977 to 2002. All prices, net of inflation, were found to be...

Hampton at Willamina is #1 : Seneca, Weyerhaeuser mills follow

Treesearch

Henry Spelter

2003-01-01

Approximately 720 sawmills produce most of the softwood lumber in the U.S. The largest 200 of these, ranked mostly according to 2002 production, are displayed in the table on the ensuing pages. Where the actual production statistic was not released, it was estimated by subtracting from capacity any lost volume due to downtime. In a few instances where neither...

Relationships between prefire composition, fire impact, and postfire legacies in the boreal forest of Eastern Canada

Treesearch

Alain Leduc; Yves Bergeron; Sylvie Gauthier

2007-01-01

Canadian mixedwood forests have a high compositional and structural diversity. It includes both hardwood (aspen, balsam poplar, and white birch) and softwood (balsam fir, white spruce, black spruce, larch, and white cedar) species that can form pure stands or mixed stands. This heterogeneity results in a variety of vertical structural strata that can potentially...

77 FR 64955 - Hardwood and Decorative Plywood From the People's Republic of China: Initiation of Countervailing...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-24

.... Appendix I Scope of the Investigation Hardwood and decorative plywood is a panel composed of an assembly of two or more layers or plies of wood veneer(s) in combination with a core. The several layers, along... decorative plywood panel can be composed of one or more species of hardwoods, softwoods, or bamboo, (in...

Timber resource statistics for the Porcupine inventory unit ofAlaska, 1978.

Treesearch

Theodore S. Setzer

1987-01-01

A timber resource inventory of the Porcupine inventory unit, Alaska, was conducted in 1977 and 1978. Statistics on forest area, timber volumes, and annual growth and mortality from this inventory are presented. Timberland area is estimated at 1,453 thousand acres, and net growing stock volume, mostly softwood, is 530,505 thousand cubic feet. Net annual growth of...

Ring Shake in Eastern Hemlock: Frequency and Relationship to Tree Attributes

Treesearch

John E. Baumgras; Paul E. Sendak; David L. Sonderman; David L. Sonderman

2000-01-01

Ring shake is a barrier to improved utilization of eastern hemlock, an important component of the total softwood timber resource in the Eastern United States and Canada. Ring shake is the lengthwise separation of wood that occurs between and parallel to growth rings, diminishing lumber yields and values. Evaluating the potential for ring shake is essential to improving...

Ring shake in eastern hemlock: frequency and relationship to tree attributes

Treesearch

John E. Baumgras; Paul E. Sendak; David L. Sonderman

2000-01-01

Ring shake is a barrier to improved utilization of eastern hemlock, an important component of the total softwood timber resource in the Eastern United States and Canada. Ring shake is the lengthwise separation of wood that occurs between and parallel to growth rings, diminishing lumber yields and values. Evaluating the potential for ring shake is essential to improving...

Generation and Recovery of Solid Wood Waste in the U.S.

Treesearch

Bob Falk; David McKeever

2012-01-01

North America has a vast system of hardwood and softwood forests, and the wood harvested from this resource is widely used in many applications. These include lumber and other building materials, furniture, crating, containers, pallets and other consumer goods. This wide array of wood products generates not only a large amount of industrial wood by-product during the...

Where to cut, where to run : prospects for U.S. South softwood timber supplies and prices

Treesearch

Henry Spelter

1999-01-01

A review of market history shows that southern pine sawtimber stumpage prices have increased by over 150 percent in this decade (Timber Mart South). Concurrently, some (i.e. Cubbage and Abt (1996) Nilsson et al (1999)) have questioned the adequacy of southern timber supplies to meet projected demands, which are projected to increase by...

75 FR 52453 - Entry Requirements for Certain Softwood Lumber Products Exported From Any Country Into the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

...)(3)(iii)(B)(3), which states that ``the exporter has paid, or committed to pay, all export charges..., to his best knowledge and belief, that the exporter has paid or committed to pay ``all export charges... discrepancies between the export permit date and the entry summary data. The commenter suggests using the...

Forest type mapping with satellite data

NASA Technical Reports Server (NTRS)

Dodge, A. G., Jr.; Bryant, E. S.

1976-01-01

Computer classification of data from Landsat, an earth-orbiting satellite, has resulted in measurements and maps of forest types for two New Hampshire counties. The acreages of hardwood and softwood types and total forested areas compare favorably with Forest Service figures for the same areas. These techniques have advantages for field application, particularly in states having forest taxation laws based on general productivity.

Performance of pallet parts recovered from used wood pallets

Treesearch

John W. Clarke; Marshall S. White; Philip A. Araman

2001-01-01

The flexural modulus of elasticity (MOE), flexural modulus of rupture (MOR), and density of used pallet parts were measured and compared to the same properties of new parts. Seventy-four percent of used pallet parts sampled were hardwoods, and 26 percent were softwoods. The average mixed hardwood parts were 41 percent stronger and 40 percent stiffer than the mixed...

Ten-year history of an Oregon coastal plantation.

Treesearch

Robert H. Ruth

1957-01-01

Very productive forest land, capable of producing 1,000 to 1,500 board-feet of softwood per acre per year, is common in the "fog belt" along the Oregon Coast. Good forest management requires that this valuable land be kept in constant production with minimum time lost during the regeneration period. Also, if the land is to be managed for conifer production,...

Forest statistics for South Florida, 1988

Treesearch

Mark J. Brown; Michael T. Thompson

1988-01-01

Since 1980, area of timberland in South Florida has decreased by 21 percent to less than 659,000 acres. Area of nonindustrial private forest (NIPF) land has declined to 552,000 acres. Harvests and other cuttings occurred on 2,800 acres annually, while 2,500 acres regenerated each year. Volume of softwood growing stock increased by 19 percent to 558 million cubic feet,...

Caribean markets for U.S. wood products

Treesearch

Harold W. Wisdom; James E. Granskog; Keith A. Blatner

1986-01-01

The West Indies and the continental countries bordering the Caribbean Sea constitute a significant market for U.S. wood products. In 1983, wood product exports to the region totaled almost $157 million. The Caribbean Basin primarily is a market for softwood products, with pine lumber being the most prominent item. The flow of exports to the region is dominated by (1)...

Changes in output of industrial timber products in Georgia, 1971-1974

Treesearch

Richard L. Welch; Thomas R. Bellamy

1976-01-01

The total output of industrial timber products in Georgia amounted to almost 986 million cubic feet in 1974, 7 percent more than in 1971. Production of all major roundwood products and plant byproducts from softwood and hardwood species increased. Of the five Forest survey Regions in the State, the Southeast Region had the largest total output, the Southwest Region had...

Cradle to Gate Life Cycle Assessment of Softwood Lumber Production from the Northeast-North Central

Treesearch

Maureen Puettmann; Elaine Oneil; Richard Bergman

2013-01-01

CORRIM, the Consortium for Research on Renewable Industrial Materials, has derived life cycle inventory (LCI) data for major wood products and wood production regions in the United States. The life cycle inventory data cover from forest regeneration through to final product at the mill gate. Research has covered nine major forest products including both structural and...

Future Pacific Rim flows and prices of softwood logs, differentiated by grade.

Treesearch

Donald F. Flora; Andrea L. Anderson; Wendy J. McGInnls

1990-01-01

By 2000, prices are expected to rise significantly for medium-grade logs and modestly for low-grade logs. World economic cycles may obscure, however, the upward price trends. Exports from the United States of medium grades are expected to remain stable, while volumes of lower grades are projected to remain level through 1995 and then decline because of competition....

Air drying of softwood lumber, Fairbanks, Alaska.

Treesearch

George R Sampson; Forrest A. Ruppert

1985-01-01

Air-drying rates for two stacks of 2-inch-thick white spruce were observed in the Fairbanks area during summer 1982. The air-drying rate for the same size lumber was also observed during winter 1982-83. Very little drying occurred during the winter. Drying rates in summer were correlated with average daily temperature and average daily dew point to derive predictive...

Biorefinery lignosulfonates from sulfite-pretreated softwoods as dispersant for graphite

Treesearch

Yanlin Qin; Lixuan Yu; Ruchun Wu; Dongjie Yang; Xueqing Qiu; Junyong Zhu

2016-01-01

Two biorefinery lignosulfonates (LSs), Ca-LS-DF and Na-LS-LP were, respectively, isolated from pilot-scale sulfite-pretreated spent liquor of lodgepole pine and fermentation residue of Douglas-fir harvest forest residue. The molecular weights of Na-LS-LP and Ca-LS-DF were approximately 9 000 and 11 000 Da, respectively. The two LSs were applied as dispersant for...

The supply and demand situation for oak timber

Treesearch

Kenneth L. Quigley

1971-01-01

Twenty oak species in the eastern United States account for one-third of the hardwood sawtimber volume and almost 10 percent of both hardwood and softwood growing-stock volume. The oak-hickory and oak-pine forest types occupy about 38 percent of the forest land in the eastern United States. Oak timber volume is increasing. Annual growth exceeds annual removals by about...

Characterization and enzymatic hydrolysis of wood from transgenic Pinus taeda engineered with syringyl lignin or reduced lignin content

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edmunds, Charles W.; Peralta, Perry; Kelley, Stephen S.

Softwood is an abundant resource; however, currently its utilization for bioconversion to obtain platform sugars is limited. Pinus taeda trees which were genetically modified to either produce S lignin or to decrease lignin content were characterized with a suite of analytic techniques. Syringyl lignin was visualized in the secondary xylem of one genetic line with Maule staining. Solid-state nuclear magnetic resonance identified the S lignin units were coupled into the lignin through β-O-4 linkages, and thioacidolysis measured approximately 13% S lignin content in the same sample. Reductions of the lignin of as much as 33% were observed in the transgenics.more » To better understand how these modifications affect bioconversion, their amenability to hot water and dilute acid pretreatments and enzymatic hydrolysis was evaluated. Lignin reductions resulted in 1.9-3.2-fold increases in glucose release compared to the control. However, no apparent benefit was observed by S lignin incorporation at the concentrations reported in this study. Finally, these results highlight the potential for softwood cell wall properties to be improved for bioenergy/biochemical applications.« less

Characterization and enzymatic hydrolysis of wood from transgenic Pinus taeda engineered with syringyl lignin or reduced lignin content

DOE PAGES

Edmunds, Charles W.; Peralta, Perry; Kelley, Stephen S.; ...

2017-02-22

Softwood is an abundant resource; however, currently its utilization for bioconversion to obtain platform sugars is limited. Pinus taeda trees which were genetically modified to either produce S lignin or to decrease lignin content were characterized with a suite of analytic techniques. Syringyl lignin was visualized in the secondary xylem of one genetic line with Maule staining. Solid-state nuclear magnetic resonance identified the S lignin units were coupled into the lignin through β-O-4 linkages, and thioacidolysis measured approximately 13% S lignin content in the same sample. Reductions of the lignin of as much as 33% were observed in the transgenics.more » To better understand how these modifications affect bioconversion, their amenability to hot water and dilute acid pretreatments and enzymatic hydrolysis was evaluated. Lignin reductions resulted in 1.9-3.2-fold increases in glucose release compared to the control. However, no apparent benefit was observed by S lignin incorporation at the concentrations reported in this study. Finally, these results highlight the potential for softwood cell wall properties to be improved for bioenergy/biochemical applications.« less

Oil spills abatement: factors affecting oil uptake by cellulosic fibers.

PubMed

Payne, Katharine C; Jackson, Colby D; Aizpurua, Carlos E; Rojas, Orlando J; Hubbe, Martin A

2012-07-17

Wood-derived cellulosic fibers prepared in different ways were successfully employed to absorb simulated crude oil, demonstrating their possible use as absorbents in the case of oil spills. When dry fibers were used, the highest sorption capacity (six parts of oil per unit mass of fiber) was shown by bleached softwood kraft fibers, compared to hardwood bleached kraft and softwood chemithermomechanical pulp(CTMP) fibers. Increased refining of CTMP fibers decreased their oil uptake capacity. When the fibers were soaked in water before exposure to the oil, the ability of the unmodified kraft fibers to sorb oil was markedly reduced, whereas the wet CTMP fibers were generally more effective than the wet kraft fibers. Predeposition of lignin onto the surfaces of the bleached kraft fibers improved their ability to take up oil when wet. Superior ability to sorb oil in the wet state was achieved by pretreating the kraft fibers with a hydrophobic sizing agent, alkenylsuccinic anhydride (ASA). Contact angle tests on a model cellulose surface showed that some of the sorption results onto wetted fibers could be attributed to the more hydrophobic nature of the fibers after treatment with either lignin or ASA.

Hydrological investigations of forest disturbance and land cover impacts in South-East Asia: a review.

PubMed

Douglas, I

1999-11-29

Investigations of land management impacts on hydrology are well developed in South-East Asia, having been greatly extended by national organizations in the last two decades. Regional collaborative efforts, such as the ASEAN-US watershed programme, have helped develop skills and long-running monitoring programmes. Work in different countries is significant for particular aspects: the powerful effects of both cyclones and landsliding in Taiwan, the significance of lahars in Java, of small-scale agriculture in Thailand and plantation establishment in Malaysia. Different aid programmes have contributed specialist knowledge such as British work on reservoir sedimentation, Dutch, Swedish and British work on softwood plantations and US work in hill-tribe agriculture. Much has been achieved through individual university research projects, including PhD and MSc theses. The net result is that for most countries there is now good information on changes in the rainfall-run-off relationship due to forest disturbance or conversion, some information on the impacts on sediment delivery and erosion of hillslopes, but relatively little about the dynamics and magnitude of nutrient losses. Improvements have been made in the ability to model the consequences of forest conversion and of selective logging and exciting prospects exist for the development of better predictions of transfer of water from the hillslopes to the stream channels using techniques such as multilevel modelling. Understanding of the processes involved has advanced through the detailed monitoring made possible at permanent field stations such as that at Danum Valley, Sabah.

Selective nickel-catalyzed conversion of model and lignin-derived phenolic compounds to cyclohexanone-based polymer building blocks.

PubMed

Schutyser, Wouter; Van den Bosch, Sander; Dijkmans, Jan; Turner, Stuart; Meledina, Maria; Van Tendeloo, Gustaaf; Debecker, Damien P; Sels, Bert F

2015-05-22

Valorization of lignin is essential for the economics of future lignocellulosic biorefineries. Lignin is converted into novel polymer building blocks through four steps: catalytic hydroprocessing of softwood to form 4-alkylguaiacols, their conversion into 4-alkylcyclohexanols, followed by dehydrogenation to form cyclohexanones, and Baeyer-Villiger oxidation to give caprolactones. The formation of alkylated cyclohexanols is one of the most difficult steps in the series. A liquid-phase process in the presence of nickel on CeO2 or ZrO2 catalysts is demonstrated herein to give the highest cyclohexanol yields. The catalytic reaction with 4-alkylguaiacols follows two parallel pathways with comparable rates: 1) ring hydrogenation with the formation of the corresponding alkylated 2-methoxycyclohexanol, and 2) demethoxylation to form 4-alkylphenol. Although subsequent phenol to cyclohexanol conversion is fast, the rate is limited for the removal of the methoxy group from 2-methoxycyclohexanol. Overall, this last reaction is the rate-limiting step and requires a sufficient temperature (>250 °C) to overcome the energy barrier. Substrate reactivity (with respect to the type of alkyl chain) and details of the catalyst properties (nickel loading and nickel particle size) on the reaction rates are reported in detail for the Ni/CeO2 catalyst. The best Ni/CeO2 catalyst reaches 4-alkylcyclohexanol yields over 80 %, is even able to convert real softwood-derived guaiacol mixtures and can be reused in subsequent experiments. A proof of principle of the projected cascade conversion of lignocellulose feedstock entirely into caprolactone is demonstrated by using Cu/ZrO2 for the dehydrogenation step to produce the resultant cyclohexanones (≈80 %) and tin-containing beta zeolite to form 4-alkyl-ε-caprolactones in high yields, according to a Baeyer-Villiger-type oxidation with H2 O2 . © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effect of biochar amendment on tylosin adsorption-desorption and transport in two different soils

Treesearch

Chang Yoon Jeong; Jim J. Wang; Syam K. Dodla; Thomas L. Eberhardt; Les Groom

2012-01-01

The role of biochar as a soil amendment on the adsorption¨C desorption and transport of tylosin, a macrolide class of veterinary antibiotic, is little known. In this study, batch and column experiments were conducted to investigate the adsorption kinetics and transport of tylosin in forest and agricultural corn field soils amended with hardwood and softwood biochars....

Economies of scale and trends in the size of southern forest industries

Treesearch

James E. Granskog

1978-01-01

In each of the major southern forest industries, the trend has been toward achieving economies of scale, that is, to build larger production units to reduce unit costs. Current minimum efficient plant size estimated by survivor analysis is 1,000 tons per day capacity for sulfate pulping, 100 million square feet (3/8- inch basis) annual capacity for softwood plywood,...

Economies of Scale and Forest Management in Mississippi

Treesearch

Andrew James Londo; Donald Leo Grebner

2004-01-01

Mississippi is the leading producer of timber in the south- central region of the United States with a combined 78 billion board feet of hardwood and softwood sawtimber harvested annually. Most of this timber comes from private nonindus-trial forest land, which accounts for 66 percent of the State’s 18.6 million acres of forest land. The forest products industry...

Transportation costs for forest products from the Puget Sound area and Alaska to Pacific Rim markets.

Treesearch

Harold W. Wisdom

1990-01-01

Ocean freight rates to Pacific Rim markets for softwood logs, cants, and wood pulp from Alaska were compared with rates from the Puget Sound area by using analysis of covariance and analysis of variance techniques. The results did not support the hypothesis that lower freight rates for Alaska result from shorter shipping distances. In many cases, ocean freight rates...

Statistical data on forest fund of Russia and changing of forest productivity in the second half of XX century

Treesearch

Alexeyev V.A.; Markov M.V.; R.A. Birdsey; Birdsey R.A.

2004-01-01

Contains statistical data on area and growing-stock volume of forest lands in Oblasts, Krays and Republics of Russian Federation, for the period 1961-1998. Positive dynamics of average growing stock for coniferous, deciduous hardwood and deciduous softwood tree stands by stand-age groups were disclosed. The impact of main anthropogenic and natural factors, including...

Design and objectives of FTM-West model

Treesearch

Peter J. Ince; Henry Spelter

2006-01-01

The FTM-West (“fuel treatment market” model for U.S. West) is a dynamic partial market equilibrium model of regional softwood timber and wood product markets, designed to project future market impacts of expanded fuel treatment programs that remove trees to reduce fire hazard on forestlands in the U.S. West. The model solves sequentially the annual equilibria in wood...

Softwood lumber prices for evaluation of small diameter timber stands in the Intermountain West.

Treesearch

John T. Chmelik; Roger D. Fight; R. James Barbour

1999-01-01

This paper reports prices for aggregations of lumber grades that are representative of the quality and volume of lumber produced from small-diameter timber stands in the Intermountain West area encompassing Idaho and Montana and land east of the Cascade Mountain range in Oregon and Washington. Price data are reported for Douglas Fir1Larch, Hem1Fir, ponderosa pine, and...

Biochar can be a suitable replacement for Sphagnum peat in nursery production of Pinus ponderosa seedlings

Treesearch

R. Kasten Dumroese; Jeremiah R. Pinto; Juha Heiskanen; Arja Tervahauta; Katherine G. McBurney; Deborah S. Page-Dumroese; Karl Englund

2018-01-01

We replaced a control peat medium with up to 75% biochar on a volumetric basis in three different forms (powder, BC; pyrolyzed softwood pellets, PP; composite wood-biochar pellets, WP), and under two supplies of nitrogen fertilizer (20 or 80 mg N) subsequently grew seedlings with a comparable morphology to the control. Using gravimetric methods to determine irrigation...

Forest statistics for the Northern Coastal Plain of North Carolina, 1990

Treesearch

Michael T. Thompson

1990-01-01

Since 1984, area of timberland in the Northern Coastal Plain of North Carolina has remained stable at 3.8 million acres. Nonindustrial private owners control two-thirds of the region's timberland. Volume of softwood growing stock increased by 6 percent to 3.1 billion cubic feet, while hardwood growing-stock volume dropped 2 percent to 3.7 billion cubic feet. Net...

Midsouth Pulpwood Prices, 1992

Treesearch

Patrick E. Miller

1994-01-01

The average price in the Midsouth for a cord of roundwood pulpwood increased 5.1 percent from $56.39 in 1991 to $59.29 in 1992. The average delivered price for a green ton of chipped residues was $27.30, an increase of 6.1 percent. In 1992, expenditures for Midsouth pulpwood increased 14.0 percent to $2.2 million. Real prices continued to rise for both softwood and...

United States pulpwood receipts : softwood and hardwood, roundwood and residues, 1950-1989

Treesearch

C. Denise Ingrain; Irene Durbak; Peter Ince

1993-01-01

This report shows pulpwood receipts at pulp mills in the United States for the period 1950-1989. It is a compilation of published and estimated data based on information from various sources, including the American Pulpwood Association, American Paper Institute, U.S. Bureau of the Census, and the USDA Forest Service. Trends are shown in the use of hardwoods compared to...

Review of alternative measures of softwood sawtimber prices in the United States

Treesearch

Henry Spelter

2005-01-01

This study compares prices from various timber market reports and an estimate of timber value derived from product-selling prices and manufacturing costs. In the South, two primary sources of timber price information are Forest2Market (F2M) and Timber Mart-South (TMS). Comparisons showed that F2M prices are generally higher than TMS prices for both stumpage and...

Abundance and characteristics of lignin liquid intermediates in wood (Pinus ponderosa Dougl. ex Laws.) during hot water extraction

Treesearch

Manuel Raul Pelaez-Samaniego; Vikram Yadama; Manuel Garcia-Perez; Eini Lowell

2015-01-01

The objective of this research was to investigate the effects of the conditions of hot water extraction (HWE) on abundance, properties, and structure of lignin depolymerization products. HWE of extracted softwood (ponderosa pine) was conducted using temperatures from 140 to 320°C for 90 min. HWE materials were then subjected to a soxhlet...

2000 national fire plan and its ramifications for wood supply from western national forests

Treesearch

Henry Spelter; Peter Ince

2001-01-01

Will the National Forests become a more reliable supplier of timber again in conjunction with the National Fire Plan? The National Forests represent a major potential source of wood fiber in the West. They occupy 48% of the commercial forestland, hold 63% of the region?s softwood growing stock, and contribute 48% of its net annual growth. But in California, Idaho,...

Origin of adventitious roots in black walnut (Juglans nigra) softwood cuttings rooted under optimized conditions in a fog chamber

Treesearch

Micah E. Stevens; Paula M. Pijut

2017-01-01

High-quality black walnut (Juglans nigra L.) logs are of great economic value and are used in the manufacture of high-end products. Indigenous to the central hardwood region, black walnut has been commercially cultivated for many years, and genetic improvement and selections have resulted in superior timber genotypes. The recalcitrance of black...

Highlights from wood for structural and architectural purposes

Treesearch

C.W. Boyd; P. Koch; H.B. McKean; C.R. Morschauser; S.B. Preston; F.F. Wangaard

1977-01-01

In 1970 the softwood and hardwood forests of the United States yielded 193 million tons (OD basis) of sawlogs, veneer logs, pulpwood, miscellaneous industrial wood, and fuel wood. By 1965, demand for such wood will likely be in the range from 248 to 260 million tons, while supply should be about 260 million tons. By the year 2000, demand will probably be in the range...

FT-Raman investigation of milled-wood lignins : softwood, hardwood, and chemically modified black spruce lignins

Treesearch

Umesh P. Agarwal; James D. McSweeny; Sally A. Ralph

2011-01-01

Raman spectroscopy is being increasingly applied to study wood and other lignin-containing biomass/biomaterials. Lignin’s contribution to the Raman spectra of such materials needs to be understood in the context of various lignin structures, substructures, and functional groups so that lignin-specific features could be identified and the spectral information could be...

Estimates of air drying times for several hardwoods and softwoods

Treesearch

W.T. Simpson; C.A. Hart

2000-01-01

Published data on estimated air drying times of lumber are of limited usefulness because they are restricted to a specific location or to the time of year the lumber is stacked for drying. At best, these estimates give a wide range of possible times over a broad range of possible locations and stacking dates. This report describes a method for estimating air drying...

Incidence and impact of damage to East Oklahoma's timber, 1986

Treesearch

Stephen Clarke; Clair Redmond; Dennis May; Dale Starkey

1994-01-01

An average of 57.4 million cubic feet of timber was lost annually to mortality and cull from 1976 to 1986 in east Oklahoma's 4.75 million acres of commercial forest land, resulting in a monetary loss of $7.2 million per year. Hardwoods generally had more damage than softwoods, with upland hardwoods accounting for 63 percent of cull volume loss. Of the ownership...

Regeneration of upper-elevation red oak in the White Mountains of New Hampshire

Treesearch

William B. Leak; Mariko. Yamasaki

2013-01-01

Northern red oak occurs in limited amounts with a mixture of softwoods on the shallow soils at upper elevations in northern New England. These stands are important for wildlife habitat and forest diversity as well as a modest amount of timber harvesting. Little experience or research is available on how to regenerate upper-elevation oak. However, an examination of a 35...

Competitiveness of U.S. wood furniture manufacturers - Lessons learned from the softwood moulding industry

Treesearch

Al Schuler; Russ Taylor; Philip A. Araman

2001-01-01

The furniture industry in the United States has been losing market share to imports for the past two decades. This article focuses on the market segment where most of the loss has occurred: the important wood household (non-upholstered) sector (SIC code 2511). In the upholstered furniture sector, exports are still larger than imports. But the wood household furniture...

Comparative study of SPORL and dilute-acid pretreatments of spruce for cellulosic ethanol production

Treesearch

L. Shuai; Q. Yang; Junyong Zhu; F.C. Lu; P.J. Weimer; J. Ralph; X.L. Pan

2010-01-01

The performance of two pretreatment methods, sulfite pretreatment to overcome recalcitrance of lignocelluloses (SPORL) and dilute acid (DA), was compared in pretreating softwood (spruce) for fuel ethanol production at 180C for 30 min with a sulfuric acid loading of 5% on oven-dry wood and a 5:1 liquor to-wood ratio. SPORL was supplemented with 9% sodium...

The rise and fall of the Pacific Northwest log export market.

Treesearch

Jean M. Daniels

2005-01-01

For decades, softwood log exports were an important component of international wood products trade from the Pacific Northwest (PNW) region of the United States. Log exports to the Pacific Rim began in earnest after the Columbus Day Storm of 1962 generated billions of board feet of salvaged timber. This market was maintained and expanded owing to Japan’s demand for high...

Aboveground tree biomass on productive forest land in Alaska.

Treesearch

John Yarie; Delbert Mead

1982-01-01

Total aboveground woody biomass of trees on forest land that can produce 1.4 cubic m eters per hectare per year of industrial wood in Alaska is 1.33 billion metric tons green weight. The estimated energy value of the standing woody biomass is 11.9 x 10'5 Btu's. Statewide tables of biomass and energy values for softwoods, hardwoods, and species groups are...

High titer and yield ethanol production from undetoxified whole slurry of Douglas-fir forest residue using pH profiling in SPORL

Treesearch

Jinlan Cheng; Shao-Yuan Leu; JY Zhu; Rolland Gleisner

2015-01-01

Forest residue is one of the most cost-effective feedstock for biofuel production. It has relatively high bulk density and can be harvested year round, advantageous for reducing transportation cost and eliminating onsite storage. However, forest residues, especially those from softwood species, are highly recalcitrant to biochemical conversion. A severe pretreatment...

Highlights from wood for structural and architectural purposes

Treesearch

Conor W. Boyd; Peter Koch; Herbert B. McKean; Charles R. Morchauser; Stephen B. Preston; Frederick F. Wangaard

1977-01-01

In 1970 the softwood and hardwood forests of the United States yielded 193 million tons (OD basis) of sawlogs, veneer logs, pulpwood, miscellaneous industrial wood, and fuel wood. By 1985, demand for such wood will likely bei n the range from 248 to 260 million tons, while supply will be about 260 million tons. By the year 2000, demand will probably be in the range...

Modification of the nanostructure of lignocellulose cell walls via a non-enzymatic lignocellulose deconstruction system in brown rot wood-decay fungi.

PubMed

Goodell, Barry; Zhu, Yuan; Kim, Seong; Kafle, Kabindra; Eastwood, Daniel; Daniel, Geoffrey; Jellison, Jody; Yoshida, Makoto; Groom, Leslie; Pingali, Sai Venkatesh; O'Neill, Hugh

2017-01-01

Wood decayed by brown rot fungi and wood treated with the chelator-mediated Fenton (CMF) reaction, either alone or together with a cellulose enzyme cocktail, was analyzed by small angle neutron scattering (SANS), sum frequency generation (SFG) spectroscopy, Fourier transform infrared (FTIR) analysis, X-ray diffraction (XRD), atomic force microscopy (AFM), and transmission electron microscopy (TEM). Results showed that the CMF mechanism mimicked brown rot fungal attack for both holocellulose and lignin components of the wood. Crystalline cellulose and lignin were both depolymerized by the CMF reaction. Porosity of the softwood cell wall did not increase during CMF treatment, enzymes secreted by the fungi did not penetrate the decayed wood. The enzymes in the cellulose cocktail also did not appear to alter the effects of the CMF-treated wood relative to enhancing cell wall deconstruction. This suggests a rethinking of current brown rot decay models and supports a model where monomeric sugars and oligosaccharides diffuse from the softwood cell walls during non-enzymatic action. In this regard, the CMF mechanism should not be thought of as a "pretreatment" used to permit enzymatic penetration into softwood cell walls, but instead it enhances polysaccharide components diffusing to fungal enzymes located in wood cell lumen environments during decay. SANS and other data are consistent with a model for repolymerization and aggregation of at least some portion of the lignin within the cell wall, and this is supported by AFM and TEM data. The data suggest that new approaches for conversion of wood substrates to platform chemicals in biorefineries could be achieved using the CMF mechanism with >75% solubilization of lignocellulose, but that a more selective suite of enzymes and other downstream treatments may be required to work when using CMF deconstruction technology. Strategies to enhance polysaccharide release from lignocellulose substrates for enhanced enzymatic action and fermentation of the released fraction would also aid in the efficient recovery of the more uniform modified lignin fraction that the CMF reaction generates to enhance biorefinery profitability.

Environmental assessment of mild bisulfite pretreatment of forest residues into fermentable sugars for biofuel production.

PubMed

Nwaneshiudu, Ikechukwu C; Ganguly, Indroneil; Pierobon, Francesca; Bowers, Tait; Eastin, Ivan

2016-01-01

Sugar production via pretreatment and enzymatic hydrolysis of cellulosic feedstock, in this case softwood harvest residues, is a critical step in the biochemical conversion pathway towards drop-in biofuels. Mild bisulfite (MBS) pretreatment is an emerging option for the breakdown and subsequent processing of biomass towards fermentable sugars. An environmental assessment of this process is critical to discern its future sustainability in the ever-changing biofuels landscape. The subsequent cradle-to-gate assessment of a proposed sugar production facility analyzes sugar made from woody biomass using MBS pretreatment across all seven impact categories (functional unit 1 kg dry mass sugar), with a specific focus on potential global warming and eutrophication impacts. The study found that the eutrophication impact (0.000201 kg N equivalent) is less than the impacts from conventional beet and cane sugars, while the global warming impact (0.353 kg CO2 equivalent) falls within the range of conventional processes. This work discusses some of the environmental impacts of designing and operating a sugar production facility that uses MBS as a method of treating cellulosic forest residuals. The impacts of each unit process in the proposed facility are highlighted. A comparison to other sugar-making process is detailed and will inform the growing biofuels literature.

Quantifying second generation ethanol inhibition: Design of Experiments approach and kinetic model development.

PubMed

Schneiderman, Steven J; Johnson, Roger W; Menkhaus, Todd J; Gilcrease, Patrick C

2015-03-01

While softwoods represent a potential feedstock for second generation ethanol production, compounds present in their hydrolysates can inhibit fermentation. In this study, a novel Design of Experiments (DoE) approach was used to identify significant inhibitory effects on Saccharomyces cerevisiae D5A for the purpose of guiding kinetic model development. Although acetic acid, furfural and 5-hydroxymethyl furfural (HMF) were present at potentially inhibitory levels, initial factorial experiments only identified ethanol as a significant rate inhibitor. It was hypothesized that high ethanol levels masked the effects of other inhibitors, and a subsequent factorial design without ethanol found significant effects for all other compounds. When these non-ethanol effects were accounted for in the kinetic model, R¯(2) was significantly improved over an ethanol-inhibition only model (R¯(2)=0.80 vs. 0.76). In conclusion, when ethanol masking effects are removed, DoE is a valuable tool to identify significant non-ethanol inhibitors and guide kinetic model development. Copyright © 2014 Elsevier Ltd. All rights reserved.

Comparative effect of mechanical beating and nanofibrillation of cellulose on paper properties made from bagasse and softwood pulps.

PubMed

Afra, Elyas; Yousefi, Hossein; Hadilam, Mohamad Mahdi; Nishino, Takashi

2013-09-12

Cellulose fibers were fibrillated using mechanical beating (shearing refiner) and ultra-fine friction grinder, respectively. The fibrillated fibers were then used to make paper. Mechanical beating process created a partial skin fibrillation, while grinding turned fiber from micro to nanoscale through nanofibrillation mechanism. The partially fibrillated and nano fibrillated fibers had significant effects on paper density, tear strength, tensile strength and water drainage time. The effect of nanofibrillation on paper properties was quantitatively higher than that of mechanical beating. Paper sheets from nanofibrillated cellulose have a higher density, higher tensile strength and lower tear strength compared to those subjected to mechanical beating. Mechanical beating and nanofibrillation were both found to be promising fiber structural modifications. Long water drainage time was an important drawback of both fibrillation methods. Copyright © 2013 Elsevier Ltd. All rights reserved.

Pore size dependent molecular adsorption of cationic dye in biomass derived hierarchically porous carbon.

PubMed

Chen, Long; Ji, Tuo; Mu, Liwen; Shi, Yijun; Wang, Huaiyuan; Zhu, Jiahua

2017-07-01

Hierarchically porous carbon adsorbents were successfully fabricated from different biomass resources (softwood, hardwood, bamboo and cotton) by a facile two-step process, i.e. carbonization in nitrogen and thermal oxidation in air. Without involving any toxic/corrosive chemicals, large surface area of up to 890 m 2 /g was achieved, which is comparable to commercial activated carbon. The porous carbons with various surface area and pore size were used as adsorbents to investigate the pore size dependent adsorption phenomenon. Based on the density functional theory, effective (E-SSA) and ineffective surface area (InE-SSA) was calculated considering the geometry of used probing adsorbate. It was demonstrated that the adsorption capacity strongly depends on E-SSA instead of total surface area. Moreover, a regression model was developed to quantify the adsorption capacities contributed from E-SSA and InE-SSA, respectively. The applicability of this model has been verified by satisfactory prediction results on porous carbons prepared in this work as well as commercial activated carbon. Revealing the pore size dependent adsorption behavior in these biomass derived porous carbon adsorbents will help to design more effective materials (either from biomass or other carbon resources) targeting to specific adsorption applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blijderveen, Maarten van; University of Twente, Department of Thermal Engineering, Drienerlolaan 5, 7522 NB Enschede; Bramer, Eddy A.

Highlights: Black-Right-Pointing-Pointer We model piloted ignition times of wood and plastics. Black-Right-Pointing-Pointer The model is applied on a packed bed. Black-Right-Pointing-Pointer When the air flow is above a critical level, no ignition can take place. - Abstract: To gain insight in the startup of an incinerator, this article deals with piloted ignition. A newly developed model is described to predict the piloted ignition times of wood, PMMA and PVC. The model is based on the lower flammability limit and the adiabatic flame temperature at this limit. The incoming radiative heat flux, sample thickness and moisture content are some of themore » used variables. Not only the ignition time can be calculated with the model, but also the mass flux and surface temperature at ignition. The ignition times for softwoods and PMMA are mainly under-predicted. For hardwoods and PVC the predicted ignition times agree well with experimental results. Due to a significant scatter in the experimental data the mass flux and surface temperature calculated with the model are hard to validate. The model is applied on the startup of a municipal waste incineration plant. For this process a maximum allowable primary air flow is derived. When the primary air flow is above this maximum air flow, no ignition can be obtained.« less

A strain of Saccharomyces cerevisiae evolved for fermentation of lignocellulosic biomass displays improved growth and fermentative ability in high solids concentrations and in the presence of inhibitory compounds

PubMed Central

2011-01-01

Background Softwoods are the dominant source of lignocellulosic biomass in the northern hemisphere, and have been investigated worldwide as a renewable substrate for cellulosic ethanol production. One challenge to using softwoods, which is particularly acute with pine, is that the pretreatment process produces inhibitory compounds detrimental to the growth and metabolic activity of fermenting organisms. To overcome the challenge of bioconversion in the presence of inhibitory compounds, especially at high solids loading, a strain of Saccharomyces cerevisiae was subjected to evolutionary engineering and adaptation for fermentation of pretreated pine wood (Pinus taeda). Results An industrial strain of Saccharomyces, XR122N, was evolved using pretreated pine; the resulting daughter strain, AJP50, produced ethanol much more rapidly than its parent in fermentations of pretreated pine. Adaptation, by preculturing of the industrial yeast XR122N and the evolved strains in 7% dry weight per volume (w/v) pretreated pine solids prior to inoculation into higher solids concentrations, improved fermentation performance of all strains compared with direct inoculation into high solids. Growth comparisons between XR122N and AJP50 in model hydrolysate media containing inhibitory compounds found in pretreated biomass showed that AJP50 exited lag phase faster under all conditions tested. This was due, in part, to the ability of AJP50 to rapidly convert furfural and hydroxymethylfurfural to their less toxic alcohol derivatives, and to recover from reactive oxygen species damage more quickly than XR122N. Under industrially relevant conditions of 17.5% w/v pretreated pine solids loading, additional evolutionary engineering was required to decrease the pronounced lag phase. Using a combination of adaptation by inoculation first into a solids loading of 7% w/v for 24 hours, followed by a 10% v/v inoculum (approximately equivalent to 1 g/L dry cell weight) into 17.5% w/v solids, the final strain (AJP50) produced ethanol at more than 80% of the maximum theoretical yield after 72 hours of fermentation, and reached more than 90% of the maximum theoretical yield after 120 hours of fermentation. Conclusions Our results show that fermentation of pretreated pine containing liquid and solids, including any inhibitory compounds generated during pretreatment, is possible at higher solids loadings than those previously reported in the literature. Using our evolved strain, efficient fermentation with reduced inoculum sizes and shortened process times was possible, thereby improving the overall economic viability of a woody biomass-to-ethanol conversion process. PMID:22074982

Field experience silvicultural cleaning project in young spruce and fir stands in central Nova Scotia

Treesearch

Theodore C. Tryon; Thomas W. Hartranft

1977-01-01

Silvicultural cleaning production varied from .15 to .34 acres per man day using light weight chain saws in young Spruce and Fir stands in Central Nova Scotia. Direct labor and saw costs, in cleaning young softwood stands in Nova Scotia, can be expected to range generally from $55.00 to $90.00 per acre, depending on crew experience, stand density, and equipment used....

South Carolina's industrial timber products output, 1977-1981

Treesearch

John B. Tansey

1984-01-01

The output of industrial timber products from South Carolina’s forests amounted to 506.9 million cubic feet in 1981, 5 percent less than in 1977. An increase in output from softwood roundwood of almost 2.8 million cubic feet was more than offset by a decrease in hardwood roundwood output of more than 5.8 cubic feet. Pulpwood was the leading roundwood product in the...

Effect of moisture content on warp in hardwood 2 by 6`s for structural use

Treesearch

William T. Simpson; John W. Forsman

Sugar maple (Acer saccharum), red maple (Acer rubrum), and yellow birch (Betula alleghaniensis) 2 by 6as were dried and evaluated for warp as it affects ability to meet softwood dimension lumber grading rule requirements for warp. In the first part of the study, sugar maple was kiln-dried to three levels of final moisture content: 27%, 19%, and 12%. Warp during kiln...

Evaluation of new creosote formulations after extended exposures in fungal cellar tests and field plot tests

Treesearch

Douglas M. Crawford; Patricia K. Lebow; Rodney DeGroot

2000-01-01

This paper compares two new formulations of creosote and one pigment-emulsified creosote (PEC) with a formulation of creosote that met requirements of the AWPA standard P1/P13. Two softwood and two hardwood species were treated to four retention levels with each formulation. The evaluation of the four creosote formulations was done using (1) soil-block tests, (2)...

WestPro: a computer program for simulating uneven-aged Douglas-fir stand growth and yield in the Pacific Northwest.

Treesearch

Rebecca Ralston; Joseph Buongiorno; Benedict Schulte; Jeremy Fried

2003-01-01

WestPro is an add-in program designed to work with Microsoft Excel to simulate the growth of uneven-aged Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) stands in the Pacific Northwest region of the United States. Given the initial stand state, defined as the number of softwood and hardwood trees per acre by diameter class, WestPro predicts the...

Estimating air drying times of small-diameter ponderosa pine and Douglas-fir logs.

Treesearch

William T. Simpson; Xiping. Wang

2003-01-01

Because dense stands of softwood trees are causing forest health problems in the western United States, new ways to use this material need to be found. One option is to use this material as logs rather than sawing it into lumber. For many applications, logs require some degree of drying. Even though these logs may be considered small diameter, they are large compared...

Cradle-to-gate life-cycle inventory of U.S. wood products production: CORRIM phase I and phase II products

Treesearch

Maureen E. Puettmann; Richard Bergman; Steve Hubbard; Leonard Johnson; Bruce Lippke; Elaine Oneil; Francis G. Wagner

2010-01-01

This article documents cradle-to-gate life-cycle inventories for softwood lumber, hardwood lumber, and solid-strip hardwood flooring manufacturing from the Inland Northwest and the Northeast–North Central regions of the US. Environmental impacts were measured based on emissions to air and water, solid waste, energy consumption, and resource use. The manufacturing stage...

Estimated demand for lumber and plywood in Hawaii by the year 2000

Treesearch

George D. Frazier

1965-01-01

By the year 2000, total lumber consumption in Hawaii is expected to be between 78 and 128 million board feet. Hardwood lumber consumption is expected to exceed 16 million board feet — an increase of nearly 2½ times the present level of use. In contrast, softwood lumber use is expected to remain at about the present level of 79 million board feet. Plywood...

Composition, volume, and prices for major softwood lumber types in western Oregon and Washington, 1971-2020.

Treesearch

James F. Weigand

1998-01-01

An analysis of lumber prices provided regressions for price trends during the period 1971-95 for composite lumber grades of major timber species found in the Pacific Northwest west of the crest of the Cascade Range. The analysis included data for coastal Douglas-fir and hem-fir lumber; coastal and inland Pacific Northwest ponderosa, sugar, and western white pines; and...

REVIEW OF MACROSCOPIC FEATURES FOR HARDWOOD AND SOFTWOOD IDENTIFICATION AND A PROPOSAL FOR A NEW CHARACTER LIST

Treesearch

Flavio Ruffinatto; Alan Crivellaro; Alex Wiedenhoeft

2015-01-01

With the adoption of a number of anti-illegal logging laws, treaties, memoranda, and international agreements around the world, there is broad and renewed interest in wood identification, especially in the field at the macroscopic level. In response to this interest, and to begin to fill an obvious gap in the corpus of wood anatomical reference material, we review...

Recycling and the Use of Wood Materials by the U.S. Pallet Industry

Treesearch

Robert J. Bush; Eric Hansen; Philip A. Araman

1994-01-01

Estimates of the use of new and recycled wood materials by the U.S. pallet industry are presented. The industry (including SICs 2441, 2448, 2449) consumed 4.74 billion board feet of solid hardwoods and 2.15 billion board feet of solid softwoods in 1992. The most common individual hardwood species were oak and yellow-poplar. Douglas-fir and southern yellow pine were the...

High solids Quasi-Simultaneous Enzymatic Saccharification and Fermentation of Un-Detoxified Whole Slurry of SPORL Pretreated Douglas-fir Forest Residue

Treesearch

Jinlan Cheng; S.-Y. Leu; Roland Gleisner; X.J. Pan; J.Y. Zhu

2014-01-01

Forest residue is the most affordable feedstock for biofuel production as stated in a recent US National Research Council Report. Softwood forest residue represents a significant amount of woody biomass that can be sustainably used to produce biofuel. It also has very low contents of acetyl groups and 5-carbon polysaccharides, favorable for biofuel production through...

Optical transparency of paper as a function of moisture content with applications to moisture measurement.

PubMed

Forughi, A F; Green, S I; Stoeber, B

2016-02-01

Accurate measurement of the moisture content of paper is essential in papermaking and is also important in some paper-based microfluidic devices. Traditional measurement techniques provide very limited spatiotemporal resolution and working range. This article presents a novel method for moisture content measurement whose operating principle is the strong correlation between the optical transparency of paper and its moisture content. Spectrographic and microscopic measurement techniques were employed to characterize the relation of moisture content and relative transparency of four types of paper: hardwood chemi-thermomechanical pulp paper, Northern bleached softwood kraft paper, unbleached softwood kraft paper, and General Electric(®) Whatman™ grade 1 chromatography paper. It was found that for all paper types, the paper transparency increased monotonically with the moisture content (as the ratio of the mass-of-water to the mass-of-dry-paper increased from 0% to 120%). This significant increase in relative transparency occurred due to the refractive index matching role of water in wet paper. It is further shown that mechanical loading of the paper has little impact on the relative transparency, for loadings that would be typical on a paper machine. The results of two transient water absorption experiments are presented that show the utility and accuracy of the technique.

Comparison of VOC emissions between air-dried and heat-treated Norway spruce ( Picea abies), Scots pine ( Pinus sylvesteris) and European aspen ( Populus tremula) wood

NASA Astrophysics Data System (ADS)

Hyttinen, Marko; Masalin-Weijo, Marika; Kalliokoski, Pentti; Pasanen, Pertti

2010-12-01

Heat-treated wood is an increasingly popular decoration material. Heat-treatment improves dimensional stability of the wood and also prevents rot fungus growth. Although production of heat-treated wood has been rapidly increasing, there is only little information about the VOC emissions of heat-treated wood and its possible influences on indoor air quality. In the present study, VOC emissions from three untreated (air-dried) and heat-treated wood species were compared during a four weeks test period. It appeared that different wood species had clearly different VOC emission profiles. Heat-treatment was found to decrease VOC emissions significantly and change their composition. Especially, emissions of terpenes decreased from softwood samples and aldehydes from European aspen samples. Emissions of total aldehydes and organic acids were at the same level or slightly higher from heat treated than air-dried softwood samples. In agreement with another recent study, the emissions of furfural were found to increase and those of hexanal to decrease from all the wood species investigated. In contrast to air-dried wood samples, emissions of VOCs were almost in steady state from heat treated wood samples even in the beginning of the test.

Integrated Forest Products Refinery (IFPR)

DOE Office of Scientific and Technical Information (OSTI.GOV)

van Heiningen, Adriaan R. P.

2010-05-29

Pre-extraction–kraft studies of hardwoods showed that when extracting about 10% of the wood, the final kraft pulp yield and physical properties could only be maintained at a level similar to that of regular kraft pulp when the final extract pH was close to neutral. This so-called “near neutral” pre-extraction condition at a level of 10% wood dissolution was achieved by contacting the wood chips with green liquor (GL) at a charge of about 3% (as Na2O on wood) at 160 °C for almost 2 hours (or an H-factor of about 800 hrs.). During subsequent kraft cooking of the pre-extracted hardwoodmore » chips the effective alkali charge could be reduced by about 3% (as Na2O on wood) and the cooking time shortened relative to that during regular kraft cooking, while still producing the same bleachable grade kappa number as the kraft control pulp. For softwood, no extraction conditions were discovered in the present investigation whereby both the final kraft pulp yield and physical properties could be maintained at a level similar to that of regular softwood kraft pulp. Therefore for hardwoods the “near- neutral green liquor pre-extraction conditions do meet the requirements of the IFPR concept, while for softwood, no extraction conditions were discovered which do meet these requirements. Application of simulated industrial GL at an extraction H-factor of about 800 hrs and 3% GL charge in a recirculating digester produced an hardwood extract containing about 4% (on wood) of total anhydro-sugars, 2% of acetic acid, and 1.3% of lignin. Xylan comprised of 80% of the sugars of which about 85% is oligomeric. Since only polymeric hemicelluloses and lignin may be adsorbed on pulp (produced at a yield of about 50% from the original wood), the maximum theoretical yield increase due to adsorption may be estimated as 10% on pulp (or 5% on wood). However, direct application of raw GL hardwood extract for hemicelluloses adsorption onto hardwood kraft pulp led to a yield increase of only about 1% (on pulp). By using the wet-end retention aid guar gum during the adsorption process at a charge of 0.5% on pulp the yield gain may be increased to about 5%. Unfortunately, most of this yield increase is lost during subsequent alkaline treatments in the pulp bleach plant. It was found that by performing the adsorption at alkaline conditions the adsorption loss during alkaline treatment in the bleach plant is mostly avoided. Thus a permanent adsorption yield of about 3 and 1.5% (on pulp) was obtained with addition of guar gum at a charge of 0.5 and 0.1% respectively during adsorption of GL hardwood extract on pre-extracted kraft pulp at optimal conditions of pH 11.5, 90 C for 60 minutes at 5% consistency. The beatability of the adsorbed kraft pulps was improved. Also, significant physical strength improvements were achieved. Further study is needed to determine whether the improvements in pulp yield and paper properties make this an economic IFPR concept. Application of the wood solids of a hot water extract of Acer rubrum wood strands as a substitute for polystyrene used for production of SMC maintained the water adsorption properties of the final product. Further work on the physical properties of the hemicellulose containing SMCs need to be completed to determine the potential of wood extracts for the production of partially renewable SMCs. The discovery of the “near-neutral” green liquor extraction process for hardwood was formed the basis for a commercial Integrated Biorefinery that will extract hemicelluloses from wood chips to make biofuels and other specialty chemicals. The pulp production process will be maintained as is proposed in the present researched IFBR concept. This Integrated Biorefinery will be constructed by Red Shield Acquisition LLC (RSA) at the Old Town kraft pulp mill in Maine. RSA in collaboration with the University of Maine will develop and commercialize the hemicellulose extraction process, the conversion of the hemicellulose sugars into butanol by fermentation, and the separation of specialty chemicals such as acetic acid from the extract. When operating the facility will produce 1.5 million gallons per year of butanol and create 16 new “green collar” jobs. Previously, a spare pulp digester was converted to a new extractor, and in 2009 it was demonstrated that a good hemicellulose extract could be produced, while simultaneously producing market pulp. Since then more than 250 hours of operational experience has been acquired by the mill generating a hemicellulose extract while simultaneously producing market pulp at a scale of 1000 tonnes (OD)/day of mixed northern hardwood chips.« less

Sawmill closures, openings, and net capacity changes in the softwood lumber sector, 1996-2003 [electronic resource

Treesearch

Henry Spelter

From a starting universe of approximately 1,300 Canadian and American sawmills, 149 were permanently closed between 1996 and 2003. This figure does not include small portable or part-time operations. These mills represented 17.6 million m3 of capacity, nearly 12% of the 1995 industry total. On the other hand, 25 new mills brought on-line have offset 4.9 million m3 of...

Wood decay: a submicroscopic view

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanchette, R.A.

1980-01-01

Typical patterns of decay in softwoods are shown by ultrastructural differences revealed by SEM. Illustrative micrographs are reproduced showing fungi and their effects. Brown rot fungi (e.g. Fomitopsis pinicolor) degrade cellulose leaving a lignin skeleton. White rot fungi (e.g. Coriolus versicolor and Hirschioporus abietinus) degrade both lignin and cellulose. White pocket rots (e.g. Phellinus pini) primarily degrade lignin; they have potential for use in paper making, or the production of animal feed.

Life-Cycle Energy and GHG Emissions for New and Recovered Softwood Framing Lumber and Hardwood Flooring Considering End-of-Life Scenarios

Treesearch

Richard D. Bergman; Robert H. Falk; Hongmei Gu; Thomas R. Napier; Jamie Meil

2013-01-01

Within the green building fields is a growing movement to recover and reuse building materials in lieu of demolition and land fill disposal. However, they lack life-cycle data to help quantify environmental impacts. This study quantifies the primary energy and greenhouse gas (GHG) emissions released from the production of wood recovered from an old house and from new...

Minor shake up : markets were soft, but the big mills still packed some production punch

Treesearch

Henry Spelter

2007-01-01

For softwood lumber producers 2006 was an ?interesting? year, but mostly in the Chinese proverbial sense of the word. This is illustrated by the top U.S. producer, the Hampton Affiliates sawmill in Willamina, Ore. It receives double kudos for remaining the top producer, but also for being the one among the top 30 that cut back the most, thus doing its share to keep a...

Utilization of Oregon’s timber harvest and associated direct economic effects.

Treesearch

Krista M. Gebert; Charles E. Keegan; Sue Willits; Al. Chase

2002-01-01

With more than 16 million acres of commercial timberland, Oregon’s forest products industry is an important part of Oregon’s economy and a major player in the Nation’s wood products market. Despite declining production over the last decade, in 1998 Oregon was still the leading producer of softwood lumber and plywood in the United States, and the timber harvested in...

Projections of the U.S. timber supply and demand situation to 2050 : draft findings from the USDA Forest Service 2000 RPA Timber Assessment.

Treesearch

Richard Haynes; Darius Adams; Ralph Alig; David Brooks; Irene Durbak; James Howard; Peter Ince; David McKeever; John Mills; Ken Skog; Xiaoping Zhou

2001-01-01

The Draft RPA Timber Assessment projects, over the next 50 years, the likelihood of increasing abundance of softwoods in the South and decreasing abundance of hardwoods in the South. These trends in supply, along with projected contributions from the North and West, imply U.S. consumption needs could be met without increasing net product imports and would not increase...