Siegel, Miriam; Starks, Sarah E.; Sanderson, Wayne T.; Kamel, Freya; Hoppin, Jane A.; Gerr, Fred
2017-01-01
Purpose Although organic solvents are often used in agricultural operations, neurotoxic effects of solvent exposure have not been extensively studied among famers. The current analysis examined associations between questionnaire-based metrics of organic solvent exposure and depressive symptoms among farmers. Methods Results from 692 male Agricultural Health Study participants were analyzed. Solvent type and exposure duration were assessed by questionnaire. An “ever-use” variable and years of use categories were constructed for exposure to gasoline, paint/lacquer thinner, petroleum distillates, and any solvent. Depressive symptoms were ascertained with the Center for Epidemiologic Studies Depression Scale (CES-D); scores were analyzed separately as continuous (0-60) and dichotomous (<16 versus ≥16) variables. Multivariate linear and logistic regression models were used to estimate crude and adjusted associations between measures of solvent exposure and CES-D score. Results Forty-one percent of the sample reported some solvent exposure. The mean CES-D score was 6.5 (SD=6.4; median=5; range=0 – 44); 92% of the sample had a score below 16. After adjusting for covariates, statistically significant associations were observed between ever-use of any solvent, long duration of any solvent exposure, ever-use of gasoline, ever-use of petroleum distillates, and short duration of petroleum distillate exposure and continuous CES-D score (p<0.05). Although nearly all associations were positive, fewer statistically significant associations were observed between metrics of solvent exposure and the dichotomized CES-D variable. Conclusions Solvent exposures were associated with depressive symptoms among farmers. Efforts to limit exposure to organic solvents may reduce the risk of depressive symptoms among farmers. PMID:28702848
Mattei, Francesca; Liverani, Silvia; Guida, Florence; Matrat, Mireille; Cenée, Sylvie; Azizi, Lamiae; Menvielle, Gwenn; Sanchez, Marie; Pilorget, Corinne; Lapôtre-Ledoux, Bénédicte; Luce, Danièle; Richardson, Sylvia; Stücker, Isabelle
2016-01-01
Background The association between lung cancer and occupational exposure to organic solvents is discussed. Since different solvents are often used simultaneously, it is difficult to assess the role of individual substances. Objectives The present study is focused on an in-depth investigation of the potential association between lung cancer risk and occupational exposure to a large group of organic solvents, taking into account the well-known risk factors for lung cancer, tobacco smoking and occupational exposure to asbestos. Methods We analysed data from the Investigation of occupational and environmental causes of respiratory cancers (ICARE) study, a large French population-based case–control study, set up between 2001 and 2007. A total of 2276 male cases and 2780 male controls were interviewed, and long-life occupational history was collected. In order to overcome the analytical difficulties created by multiple correlated exposures, we carried out a novel type of analysis based on Bayesian profile regression. Results After analysis with conventional logistic regression methods, none of the 11 solvents examined were associated with lung cancer risk. Through a profile regression approach, we did not observe any significant association between solvent exposure and lung cancer. However, we identified clusters at high risk that are related to occupations known to be at risk of developing lung cancer, such as painters. Conclusions Organic solvents do not appear to be substantial contributors to the occupational risk of lung cancer for the occupations known to be at risk. PMID:26911986
Organic solvent exposure and hearing loss in a cohort of aluminium workers.
Rabinowitz, P M; Galusha, D; Slade, M D; Dixon-Ernst, C; O'Neill, A; Fiellin, M; Cullen, M R
2008-04-01
Organic solvent exposure has been shown to cause hearing loss in animals and humans. Less is known about the risk of hearing loss due to solvent exposures typically found in US industry. The authors performed a retrospective cohort study to examine the relationship between solvent exposure and hearing loss in US aluminium industry workers. A cohort of 1319 workers aged 35 years or less at inception was followed for 5 years. Linkage of employment, industrial hygiene and audiometric surveillance records allowed for estimation of noise and solvent exposures and hearing loss rates over the study period. Study subjects were classified as "solvent exposed" or not, on the basis of industrial hygiene records linked with individual job histories. High frequency hearing loss was modelled as both a continuous and a dichotomous outcome. Typical solvent exposures involved mixtures of xylene, toluene and/or methyl ethyl ketone (MEK). Recorded solvent exposure levels varied widely both within and between jobs. In a multivariate logistic model, risk factors for high frequency hearing loss included age (OR = 1.06, p = 0.004), hunting or shooting (OR = 1.35, p = 0.049), noisy hobbies (OR = 1.74, p = 0.01), baseline hearing level (OR = 1.04, p<0.001) and solvent exposure (OR = 1.87, p = 0.004). A multivariate linear regression analysis similarly found significant associations between high frequency hearing loss and age (p<0.001), hunting or shooting (p<0.001), noisy hobbies (p = 0.03), solvent exposure (p<0.001) and baseline hearing (p = 0.03). These results suggest that occupational exposure to organic solvent mixtures is a risk factor for high frequency hearing loss, although the data do not allow conclusions about dose-response relationships. Industries with solvent-exposed workers should include such workers in hearing conservation programs.
Attarchi, Mirsaeed; Golabadi, Majid; Labbafinejad, Yasser; Mohammadi, Saber
2013-02-01
Recent studies suggest that occupational exposures such as noise and organic solvents may affect blood pressure. The aim of this study was to investigate interaction of noise and mixed organic solvents on blood pressure. Four hundred seventy-one workers of a car manufacturing plant were divided into four groups: group one or G1 workers exposed to noise and mixed organic solvents in the permitted limit or control group, G3 exposed to noise only, G2 exposed to solvents only, and G4 workers exposed to noise and mixed organic solvents at higher than the permitted limit or co-exposure group. Biological interaction of two variables on hypertension was calculated using the synergistic index. The workers of co-exposure group (G4), noise only group (G3), and solvents only group (G2) had significantly higher mean values of SBP and DBP than workers of control group (G1) or office workers (P < 0.05). Also logistic regression analysis showed a significant association between hypertension and exposure to noise and mixture of organic solvents. Odds ratio for hypertension in the co-exposure group and the noise only and solvents only exposed groups was 14.22, 9.43, and 4.38, respectively, compared to control group. In this study, the estimated synergism index was 1.11. Our results indicate that exposure to noise or a mixture of organic solvents may be associated with the prevalence of hypertension in car manufacturing company workers and co-exposure to noise and a mixture of solvents has an additive effect in this regard. Therefore appropriate preventive programs in these workers recommended. Copyright © 2012 Wiley Periodicals, Inc.
Occupational solvent exposure and brain function: an fMRI study.
Tang, Cheuk Ying; Carpenter, David M; Eaves, Emily L; Ng, Johnny; Ganeshalingam, Nimalya; Weisel, Clifford; Qian, Hua; Lange, Gudrun; Fiedler, Nancy L
2011-07-01
Deficits in cognitive function have been demonstrated among workers chronically exposed to solvents, but the neural basis for these deficits has not been shown. We used functional magnetic resonance imaging (fMRI) to compare pathophysiological changes in brain function between solvent-exposed and control workers. Painters, drywall tapers, and carpenters were recruited from the International Union of Painters and Allied Trades, District Council 9 in New York City and District Council 21 in Philadelphia, Pennsylvania, and from the Carpenters Union in New Jersey. Twenty-seven solvent-exposed and 27 control subjects of similar age, education, and occupational status completed the N-Back working memory test during fMRI. After controlling for confounders (age; lifetime marijuana, cocaine, and alcohol use; blood lead; symptoms of depression; verbal intelligence), voxelwise group analysis and regional activation levels were compared and then correlated with an index of lifetime solvent exposure. Solvent-exposed workers' performance on the N-Back was significantly worse than that of controls. Activation of the anterior cingulate, prefrontal, and parietal cortices--areas serving working memory function and attention--was also significantly lower for solvent-exposed workers relative to controls. After controlling for confounders, we observed a negative correlation between lifetime solvent exposure and activation in these same regions among the solvent-exposed workers. This study is one of the few to document neural structures affected by exposure to solvents. Our findings provide a biological mechanism for the neurobehavioral deficits in working memory and attention that have previously been reported by other groups studying the effects of chronic exposure to solvents. These imaging markers, which are consistent with the neurobehavioral measures in our subject population, are consistent with altered brain pathology caused by prolonged exposure to solvent mixtures during construction work.
Occupational Solvent Exposure and Brain Function: An fMRI Study
Carpenter, David M.; Eaves, Emily L.; Ng, Johnny; Ganeshalingam, Nimalya; Weisel, Clifford; Qian, Hua; Lange, Gudrun; Fiedler, Nancy L.
2011-01-01
Background: Deficits in cognitive function have been demonstrated among workers chronically exposed to solvents, but the neural basis for these deficits has not been shown. Objectives: We used functional magnetic resonance imaging (fMRI) to compare pathophysiological changes in brain function between solvent-exposed and control workers. Methods: Painters, drywall tapers, and carpenters were recruited from the International Union of Painters and Allied Trades, District Council 9 in New York City and District Council 21 in Philadelphia, Pennsylvania, and from the Carpenters Union in New Jersey. Twenty-seven solvent-exposed and 27 control subjects of similar age, education, and occupational status completed the N-Back working memory test during fMRI. After controlling for confounders (age; lifetime marijuana, cocaine, and alcohol use; blood lead; symptoms of depression; verbal intelligence), voxelwise group analysis and regional activation levels were compared and then correlated with an index of lifetime solvent exposure. Results: Solvent-exposed workers’ performance on the N-Back was significantly worse than that of controls. Activation of the anterior cingulate, prefrontal, and parietal cortices—areas serving working memory function and attention—was also significantly lower for solvent-exposed workers relative to controls. After controlling for confounders, we observed a negative correlation between lifetime solvent exposure and activation in these same regions among the solvent-exposed workers. Conclusions: This study is one of the few to document neural structures affected by exposure to solvents. Our findings provide a biological mechanism for the neurobehavioral deficits in working memory and attention that have previously been reported by other groups studying the effects of chronic exposure to solvents. These imaging markers, which are consistent with the neurobehavioral measures in our subject population, are consistent with altered brain pathology caused by prolonged exposure to solvent mixtures during construction work. PMID:21296712
Cardio-pulmonary effects of inhaled solvents: computer-assisted measurement and analysis
DOE Office of Scientific and Technical Information (OSTI.GOV)
Engwall, M.J.
The physiological effects of the inhalation of three solvent vapors were measured on anesthetized dogs. The tested solvents were: acetone, ethanol, and toluene. Measurements of respiratory mechanics, pulmonary and systemic hemodynamics, cardiac output, and gas-exchange were taken while exposing the animals to the vaporized solvents. After the exposures, the animals were terminated and lung tissue and alveolar lining material (ALM) were collected. The ALM was analyzed by high performance liquid chromatography for the amounts of component phospholipids. The tissues were inspected under light microscopy for evidence of acute damage associated with the solvent exposures.
Hepworth, S J; Bolton, A; Parslow, R C; van Tongeren, M; Muir, K R; McKinney, P A
2006-04-01
To compare assignment of occupational pesticide and solvent exposure using self-reported data collected by a computer assisted personal interview (CAPI) with exposure based on expert assessment of job codes. To discuss the advantages and disadvantages of using a CAPI to collect individual occupational exposure data. Between 2001 and 2004, 1495 participants were interviewed using a CAPI for a case-control study of adult brain tumours and acoustic neuromas. Two types of occupational data were collected: (1) a full history, including job title from which a job code was assigned from the Standard Occupational Classification; and (2) specific details on pesticide and solvent exposure reported by participants. Study members' experiences of using the CAPI were recorded and advantages and disadvantages summarised. Of 7192 jobs recorded, the prevalence of self-reported exposure was 1.3% for pesticides and 11.5% for solvents. Comparing this with exposure expertly assessed from job titles showed 53.6% and 45.8% concordance for pesticides and solvents respectively. Advantages of the CAPI include no data entry stage, automatic input validation, and a reduction in interviewer bias. Disadvantages include an adverse effect on study implementation as a consequence of resources required for programming and difficulties encountered with data management prior to analysis. Different methods of exposure assessment derive different exposure levels for pesticide and solvent exposure at work. Agreement between self-reported and expert assessment of exposure was greater for pesticides compared to solvents. The advantages of using a CAPI for the collection of complex data outweigh the disadvantages for interviewers and data quality but using such a method requires extra resources at the study outset.
Hepworth, S J; Bolton, A; Parslow, R C; van Tongeren, M; Muir, K R; McKinney, P A
2006-01-01
Objectives To compare assignment of occupational pesticide and solvent exposure using self‐reported data collected by a computer assisted personal interview (CAPI) with exposure based on expert assessment of job codes. To discuss the advantages and disadvantages of using a CAPI to collect individual occupational exposure data. Methods Between 2001 and 2004, 1495 participants were interviewed using a CAPI for a case‐control study of adult brain tumours and acoustic neuromas. Two types of occupational data were collected: (1) a full history, including job title from which a job code was assigned from the Standard Occupational Classification; and (2) specific details on pesticide and solvent exposure reported by participants. Study members' experiences of using the CAPI were recorded and advantages and disadvantages summarised. Results Of 7192 jobs recorded, the prevalence of self‐reported exposure was 1.3% for pesticides and 11.5% for solvents. Comparing this with exposure expertly assessed from job titles showed 53.6% and 45.8% concordance for pesticides and solvents respectively. Advantages of the CAPI include no data entry stage, automatic input validation, and a reduction in interviewer bias. Disadvantages include an adverse effect on study implementation as a consequence of resources required for programming and difficulties encountered with data management prior to analysis. Conclusions Different methods of exposure assessment derive different exposure levels for pesticide and solvent exposure at work. Agreement between self‐reported and expert assessment of exposure was greater for pesticides compared to solvents. The advantages of using a CAPI for the collection of complex data outweigh the disadvantages for interviewers and data quality but using such a method requires extra resources at the study outset. PMID:16556747
Olfactory function in painters exposed to organic solvents.
Sandmark, B; Broms, I; Löfgren, L; Ohlson, C G
1989-02-01
The olfactory receptor cells are in direct contact with the exterior environment, and some chemical agents can impair olfactory function. The olfactory function of 54 painters exposed to organic solvents was compared with that of 42 unexposed referents. A new clinical test validated for the sense of smell was used, the University of Pennsylvania Smell Identification Test. Age, smoking habits, exposure to organic solvents, and medical disorders of importance for the sense of smell were recorded. The painters had a somewhat lower test score than the referents. However, the influence of the exposure variable was not statistically significant in a multiple regression analysis including age and smoking habits. The exposure to organic solvents was low, and therefore an effect of high exposure on olfactory function cannot be ruled out. Since some of the painters had earlier been highly exposed, the effects of high exposure are likely to be reversible.
Auditory Effects of Exposure to Noise and Solvents: A Comparative Study
Lobato, Diolen Conceição Barros; Lacerda, Adriana Bender Moreira De; Gonçalves, Cláudia Giglio De Oliveira; Coifman, Herton
2013-01-01
Introduction Industry workers are exposed to different environmental risk agents that, when combined, may potentiate risks to hearing. Objective To evaluate the effects of the combined exposure to noise and solvents on hearing in workers. Methods A transversal retrospective cohort study was performed through documentary analysis of an industry. The sample (n = 198) was divided into four groups: the noise group (NG), exposed only to noise; the noise and solvents group (NSG), exposed to noise and solvents; the noise control group and noise and solvents control group (CNS), no exposure. Results The NG showed 16.66% of cases suggestive of bilateral noise-induced hearing loss and NSG showed 5.26%. The NG and NSG had worse thresholds than their respective control groups. Females were less susceptible to noise than males; however, when simultaneously exposed to solvents, hearing was affected in a similar way, resulting in significant differences (p < 0.05). The 40- to 49-year-old age group was significantly worse (p < 0.05) in the auditory thresholds in the NSG compared with the CNS. Conclusion The results observed in this study indicate that simultaneous exposure to noise and solvents can damage the peripheral auditory system. PMID:25992079
Auditory dysfunction associated with solvent exposure
2013-01-01
Background A number of studies have demonstrated that solvents may induce auditory dysfunction. However, there is still little knowledge regarding the main signs and symptoms of solvent-induced hearing loss (SIHL). The aim of this research was to investigate the association between solvent exposure and adverse effects on peripheral and central auditory functioning with a comprehensive audiological test battery. Methods Seventy-two solvent-exposed workers and 72 non-exposed workers were selected to participate in the study. The test battery comprised pure-tone audiometry (PTA), transient evoked otoacoustic emissions (TEOAE), Random Gap Detection (RGD) and Hearing-in-Noise test (HINT). Results Solvent-exposed subjects presented with poorer mean test results than non-exposed subjects. A bivariate and multivariate linear regression model analysis was performed. One model for each auditory outcome (PTA, TEOAE, RGD and HINT) was independently constructed. For all of the models solvent exposure was significantly associated with the auditory outcome. Age also appeared significantly associated with some auditory outcomes. Conclusions This study provides further evidence of the possible adverse effect of solvents on the peripheral and central auditory functioning. A discussion of these effects and the utility of selected hearing tests to assess SIHL is addressed. PMID:23324255
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wester, R.C.; Maibach, H.I.
1998-06-01
'The purpose of this study is to determine the bioavailability of organic solvents following dermal exposures to contaminated soil and water. Breath analysis is being used to obtain real-time measurements of volatile organics in expired air following exposure in rats and humans. Rhesus monkeys will be used as surrogates for humans in benzene exposures. The exhaled breath data is being analyzed using physiologically based pharmacokinetic (PBPK) models to determine the dermal bioavailability of organic solvents under realistic exposure conditions. The end product of this research will be a tested framework for the rapid screening of real and potential exposures whilemore » simultaneously developing physiologically based pharmacokinetic (PBPK) models to comprehensively evaluate and compare exposures to organics from either contaminated soil or water. This report summarizes work 7 months into a 3-year project. Method development has produced systems for solvent exposure from soil and water which mimic actual exposure, and for which animals and human volunteers can be safely tested. Soil exposure is generally open to the air (working the soil) while water exposure is generally immersion. For 6--8 hour test exposure, a patch has been developed where soil is contained against the skin by a non-occlusive membrane, while simultaneously allowing volatilization of test solvent to the environment (activated charcoal). The water counterpart is an occlusive glass culture dish, sealed to skin with silicone adhesive. Shorter term exposure is done by one hand immersion in a bucket containing circulating water or soil, the volunteer instructed to move fingers through the water or soil. Human volunteers and animals breathe fresh air via a new breath-inlet system that allows for continuous real-time analysis of undiluted exhaled air. The air supply system is self-contained and separated from the exposure solvent-laden environment. The system uses a Teledyne 3DQ Discovery ion trap mass spectrometer (MS/MS) equipped with an atmospheric sampling glow discharge ionization source (ASGDI). The MS/MS system provides an appraisal of individual chemical components in the breath stream in the single-digit parts-per-billion (ppb) detectable range for each of the compounds proposed for study, while maintaining linearity of response over a wide dynamic range.'« less
Occupational solvent exposure and cognition
Sabbath, E.L.; Glymour, M.M.; Berr, C.; Singh-Manoux, A.; Zins, M.; Goldberg, M.
2012-01-01
Objective: Chronic occupational solvent exposure is associated with long-term cognitive deficits. Cognitive reserve may protect solvent-exposed workers from cognitive impairment. We tested whether the association between chronic solvent exposure and cognition varied by educational attainment, a proxy for cognitive reserve. Methods: Data were drawn from a prospective cohort of French national gas and electricity (GAZEL) employees (n = 4,134). Lifetime exposure to 4 solvent types (chlorinated solvents, petroleum solvents, benzene, and nonbenzene aromatic solvents) was assessed using a validated job-exposure matrix. Education was dichotomized at less than secondary school or below. Cognitive impairment was defined as scoring below the 25th percentile on the Digit Symbol Substitution Test at mean age 59 (SD 2.8; 88% of participants were retired at testing). Log-binomial regression was used to model risk ratios (RRs) for poor cognition as predicted by solvent exposure, stratified by education and adjusted for sociodemographic and behavioral factors. Results: Solvent exposure rates were higher among less-educated patients. Within this group, there was a dose-response relationship between lifetime exposure to each solvent type and RR for poor cognition (e.g., for high exposure to benzene, RR = 1.24, 95% confidence interval 1.09–1.41), with significant linear trends (p < 0.05) in 3 out of 4 solvent types. Recency of solvent exposure also predicted worse cognition among less-educated patients. Among those with secondary education or higher, there was no significant or near-significant relationship between any quantification of solvent exposure and cognition. Conclusions: Solvent exposure is associated with poor cognition only among less-educated individuals. Higher cognitive reserve in the more-educated group may explain this finding. PMID:22641403
Bukowski, J A; Sargent, E V; Pena, B M
1992-01-01
Using a standard battery of medical surveillance questions, a study was undertaken to determine if an increase in reported neurologic symptoms was resulting from solvent exposure at a pharmaceutical research, development, and manufacturing site. The prevalence of positive responses to 13 interval history questions pertaining to neurological symptoms was compared between those enrolled in exposed surveillance programs (n = 840) and those enrolled in other, non-solvent exposed surveillance programs (n = 1,042). The ratio of positive responders between the exposed and unexposed groups was used to generate a relative prevalence ratio (RPR). No significantly elevated RPRs were seen when the analysis was adjusted for the confounding factors of age, sex, smoking, alcohol use, noise exposure, and number of interval histories. These results suggest that workplace solvent exposures in the employees studied did not appear to result in obvious neurologic symptoms. However, low-level neurotoxic exposures can cause asymptomatic or sub-clinical disorders. Therefore, more sensitive neurotoxic surveillance systems need to be developed.
Impairments of colour vision induced by organic solvents: a meta-analysis study.
Paramei, Galina V; Meyer-Baron, Monika; Seeber, Andreas
2004-09-01
The impairment of colour discrimination induced by occupational exposure to toluene, styrene and mixtures of organic solvents is reviewed and analysed using a meta-analytical approach. Thirty-nine studies were surveyed covering a wide range of exposure conditions. Those studies using the Lanthony Panel D-15 desaturated test (D-15d) were further considered. From these for 15 samples data on colour discrimination ability (Colour Confusion Index, CCI) and exposure levels were provided, required for the meta-analysis. In accordance with previously reported higher CCI values for the exposed groups, the computations yielded positive effect sizes for 13 of the 15 samples, indicating that in the great majority of the studies the exposed groups showed inferior colour discrimination. However, the meta-analysis showed great variation in effect sizes across the studies. Possible reasons for inconsistency among the reported findings are discussed. These pertain to exposure-related parameters, as well as to confounders such as conditions of test administration and characteristics of subject samples. Those factors vary considerably among the studies and might have greatly contributed to divergence in measured colour vision capacity, thereby obscuring consistent effects of organic solvents on colour discrimination.
Occupational and environmental scleroderma. Systematic review and meta-analysis.
Rubio-Rivas, Manuel; Moreno, Rafael; Corbella, Xavier
2017-03-01
The etiology of systemic sclerosis (SSc) remains unknown; however, several occupational and environmental factors have been implicated. Our objective was to perform a meta-analysis of all studies published on SSc associated with occupational and environmental exposure. The review was undertaken by means of MEDLINE and SCOPUS from 1960 to 2014 and using the terms: "systemic," "scleroderma," or "systemic sclerosis/chemically induced" [MesH]. The Newcastle-Ottawa Scale was used for the qualifying assessment. The inverse variance-weighted method was performed. The meta-analysis of silica exposure included 15 case-control studies [overall OR 2.81 (95%CI 1.86-4.23; p < 0.001)] and 4 cohort studies [overall RR 17.52 (95%CI 5.98-51.37; p < 0.001)]; the meta-analysis of solvents exposure included 13 case-control studies (overall OR 2.00 [95%CI 1.32-3.02; p = 0.001); the meta-analysis of breast implants exposure included 4 case-control studies (overall OR 1.68 (95%CI 1.65-1.71; p < 0.001)) and 6 cohort studies (overall RR 2.13 (95%CI 0.86-5.27; p = 0.10)); the meta-analysis of epoxy resins exposure included 4 case-control studies (overall OR 2.97 (95%CI 2.31-3.83; p < 0.001)), the meta-analysis of pesticides exposure included 3 case-control studies (overall OR 1.02 (95%CI 0.78-1.32; p = 0.90)) and, finally, the meta-analysis of welding fumes exposure included 4 studies (overall OR 1.29 (95%CI 0.44-3.74; p = 0.64)). Not enough studies citing risks related to hair dyes have been published to perform an accurate meta-analysis. Silica and solvents were the two most likely substances related to the pathogenesis of SSc. While silica is involved in particular jobs, solvents are widespread and more people are at risk of having incidental contact with them.
Chemical-Induced Hearing Loss in Shipyard Workers.
Schaal, Nicholas Cody; Slagley, Jeremy M; Richburg, Cynthia McCormick; Zreiqat, Majed M; Paschold, Helmut W
2018-01-01
The aim of this study was to determine the effect of lead, cadmium, arsenic, toluene, and xylene exposure on hearing compared with noise exposures alone. Personnel at a shipyard (n = 1266) were divided into four exposure groups on the basis of concentrations: low metals/low solvents/high noise (reference group), high metals/high solvents/low noise, high metals/low solvents/high noise, and high metals/high solvents/high noise. Hearing changes occurring from the years 2004 to 2015 were analyzed. Hearing changes were significantly worse at 1000 Hz (P = 0.007), averaged across 2000 to 4000 Hz (P = 0.014), and averaged across 500 to 6000 Hz (P = 0.014) for the high metals/high solvent/high noise group compared with the low metals/low solvents/high noise only reference group. Simultaneous exposures classified as high for metals/solvents/noise appear to damage hearing more than exposure to noise alone. Hearing conservation programs should take into consideration combined exposures to metals, solvents, and noise, not simply exposure to noise.
Benignus, Vernon A; Bushnell, Philip J; Boyes, William K
2011-12-01
Acute solvent exposures may contribute to automobile accidents because they increase reaction time and decrease attention, in addition to impairing other behaviors. These effects resemble those of ethanol consumption, both with respect to behavioral effects and neurological mechanisms. These observations, along with the extensive data on the relationship between ethanol consumption and fatal automobile accidents, suggested a way to estimate the probability of fatal automobile accidents from solvent inhalation. The problem can be approached using the logic of the algebraic transitive postulate of equality: if A=B and B=C, then A=C. We first calculated a function describing the internal doses of solvent vapors that cause the same magnitude of behavioral impairment as ingestion of ethanol (A=B). Next, we fit a function to data from the literature describing the probability of fatal car crashes for a given internal dose of ethanol (B=C). Finally, we used these two functions to generate a third function to estimate the probability of a fatal car crash for any internal dose of organic solvent vapor (A=C). This latter function showed quantitatively (1) that the likelihood of a fatal car crash is increased by acute exposure to organic solvent vapors at concentrations less than 1.0 ppm, and (2) that this likelihood is similar in magnitude to the probability of developing leukemia from exposure to benzene. This approach could also be applied to other potentially adverse consequences of acute exposure to solvents (e.g., nonfatal car crashes, property damage, and workplace accidents), if appropriate data were available. © 2011 Society for Risk Analysis Published 2011. This article is a U.S. Government work and is in the public domain for the U.S.A.
Attarchi, Mir Saeed; Ashouri, Monir; Labbafinejad, Yasser; Mohammadi, Saber
2012-04-01
Due to increasing usage of chemicals in various industries, occupational exposure of women with these materials is unavoidable. Nowadays, some studies indicate adverse effects of exposure to these chemicals, especially organic solvents on the reproductive system of females. This study aimed to assess the relationship between spontaneous abortion and occupational exposure to organic solvents mixture in pharmaceutical industry. This study was carried out in a pharmaceutical factory located in the suburb of Tehran in 2010. During the study, married women who were working in the factory laboratory units and had exposure to mixed organic solvents were compared with married women who were working in the packing units of the factory without occupational exposure to organic solvents in terms of spontaneous abortion frequency and duration of pregnancy using statistical methods. In this study, the frequency of spontaneous abortion in employees with and without exposure to organic solvents mixture was 10.7 and 2.9% respectively. This study showed that even after adjustment for confounding factors, there was a significant correlation between spontaneous abortion and occupational exposure to organic solvents mixture and this correlation increased with increasing levels of exposure to organic solvents. Also, a significant correlation was observed between occupational exposure to mixed organic solvents and waiting time to become pregnant (TTP). Furthermore, this study showed that even after adjustment for confounding variables, shift workers were significantly more affected by spontaneous abortion compared to daytime workers (P < 0.001). Also, in our study, synergistic effect between shift working and occupational exposure to organic solvents mixture on spontaneous abortion was seen. According to the results of this study, since there is probability of spontaneous abortion resulting from occupational exposure to various chemicals including organic solvents, recommendation to review the status of occupational exposure of workers can be helpful in improving fertility consultations and reproductive health.
Exacerbation of noise-induced hearing loss by co-exposure to workplace chemicals.
Sliwinska-Kowalska, Mariola; Zamyslowska-Szmytke, Ewa; Szymczak, Wieslaw; Kotylo, Piotr; Fiszer, Marta; Wesolowski, Wiktor; Pawlaczyk-Luszczynska, Malgorzata
2005-05-01
: Numerous organic solvents applied in industry, like toluene, styrene, xylene and n-hexane have been demonstrated to impair hearing in animals. However, the effects of exposure to a given organic solvent and the interaction of noise and solvents on hearing in humans are still not fully recognized. : The study was aimed to assess the effects of occupational exposure to solvents alone or in combination with noise on hearing in 1117 employees of yacht, ship, plastic, shoe, and paint and lacquer industry. These persons were exposed either to the mixture of organic solvents with xylene as the main component, or predominantly to styrene, or to the mixture of n-hexane and toluene. Detailed questionnaire data and pure-tone audiometry were compared with data of the reference group that included white collar workers, exposed neither to solvents nor noise and metal factory workers exposed to noise only. In all statistics, the confounding factors were recognized as gender, age, exposure to noise, and other variables occurring at a different rate in study and reference group. : Odds ratio (OR) of hearing loss related with the particular exposure to chemicals was 2.4 (95%CI 1.59-3.74) in case of solvent mixture, 3.9 (95%CI 2.4-6.2) in case of styrene and 5.3 (95%CI 2.6-10.9) in case of n-hexane and toluene exposure. The odds of developing hearing loss substantially increased in the case of combined exposure to organic solvents and noise as compared to isolated exposure to each of these hazards. The highest OR (over 20-fold) was demonstrated in subgroups of subjects exposed simultaneously to noise and two ototoxic solvents (i.e. styrene and toluene or n-hexane and toluene). The mean hearing thresholds were significantly higher in the solvent-exposed groups than in the reference group. The differences in thresholds were observed at high frequencies in the solvent mixture- and n-hexane + toluene-exposed groups and at all frequencies in the styrene-exposed group. A positive linear relationship existed between exposure to solvents and hearing thresholds at high frequencies. : The results of the study provide the epidemiological evidence that exposure to organic solvents in humans is associated with an increased risk of hearing loss. The simultaneous exposure to organic solvents and noise seems to enhance the hearing deficit if compared with isolated exposures.
Occupational exposure to solvents, metals and welding fumes and risk of Parkinson's disease.
van der Mark, Marianne; Vermeulen, Roel; Nijssen, Peter C G; Mulleners, Wim M; Sas, Antonetta M G; van Laar, Teus; Huss, Anke; Kromhout, Hans
2015-06-01
The aim of this study was to investigate the potential association between occupational exposure to solvents, metals and/or welding fumes and risk of developing Parkinson's disease (PD). Data of a hospital based case-control study including 444 PD patients and 876 age and sex matched controls was used. Occupational histories and lifestyle information of cases and controls were collected in a structured telephone interview. Exposures to aromatic solvents, chlorinated solvents and metals were estimated by linking the ALOHA+ job-exposure matrix to the occupational histories. Exposure to welding fumes was estimated using self-reported information on welding activities. No statistically significant associations with any of the studied metal and solvent exposures were found. However, for self-reported welding activities we observed non-statistically significant reduced risk estimates (third tertile cumulative exposure: OR = 0.51 (95% CI: 0.21-1.24)). The results of our study did not provide support for an increased chance on developing PD after occupational exposure to aromatic solvents, chlorinated solvents or exposure to metals. The results showed reduced risk estimates for welding, which is in line with previous research, but no clear explanation for these findings is available. Copyright © 2015 Elsevier Ltd. All rights reserved.
Talibov, Madar; Auvinen, Anssi; Weiderpass, Elisabete; Hansen, Johnni; Martinsen, Jan-Ivar; Kjaerheim, Kristina; Tryggvadottir, Laufey; Pukkala, Eero
2017-09-15
The aim of this study was to assess the effect of occupational solvent exposure on the risk of adult chronic lymphocytic leukemia (CLL). The current case-control study was nested in the Nordic Occupational Cancer Study (NOCCA) cohort. 20,615 CLL cases diagnosed in 1961-2005 in Finland, Iceland, Norway, and Sweden, and 103,075 population-based controls matched by year of birth, sex, and country were included. Occupational histories for cases and controls were obtained from census records in 1960, 1970, 1980/1981, and 1990. Exposure to selected solvents was estimated by using the NOCCA job-exposure matrix (NOCCA-JEM). Odds ratios (OR) and 95% confidence intervals (95% CI) were estimated by using conditional logistic regression models. Overall, nonsignificant CLL risk elevations were observed for methylene chloride, perchloroethylene, and 1,1,1-trichloroethane. Compared to unexposed, significantly increased risks were observed for cumulative perchloroethylene exposure ≤13.3 ppm-years (OR = 1.85, 95% CI 1.16-2.96) and average life-time perchloroethylene exposure ≤2.5 ppm (1.61, 95% CI 1.01-2.56) among women, and cumulative methylene chloride exposure ≤12.5 ppm-years (OR = 1.19, 95% CI 1.01-1.41) and 12.5-74.8 ppm-years (OR = 1.23, 95% CI 1.01-1.51) among men in an analysis with 5 years lag-time, though without dose-response pattern. Decreased CLL risk was observed for aliphatic and alicyclic hydrocarbon solvents and toluene. This study did not support associations for solvent exposure and CLL. Observed weak associations for methylene chloride, perchloroethylene, 1,1,1-trichloroethane exposures, aliphatic and alicyclic hydrocarbons and toluene were not consistent across sexes, and showed no gradient with amount of exposure. © 2017 UICC.
Sleep disturbances and exposure to organic solvents
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lindelof, B.; Almkvist, O.; Goethe, C.
An inquiry about sleep habits and sleep disturbances revealed a significantly higher prevalence of insomnia in a solvent-exposed group than in a comparable group that had no occupational exposure to organic solvents. The solvent-exposed group has also registered an increased consumption of hypnotics, and a significant increase occurred in the number of individuals who had consulted physicians because of sleep disorders. The results indicate that solvent exposure could induce sleep disturbances.
Comparison of the exposure-excretion relationship between men and women exposed to organic solvents.
Kawai, Toshio; Takeuchi, Akito; Ikeda, Masayuki
2015-01-01
The present study was initiated to examine if application of the same biological occupational exposure limits (BOELs) for organic solvents is applicable across the sexes. A survey was conducted in 69 micro-scale enterprises in a furniture-producing industrial park. In practice, 211 men and 52 women participated in the survey. They worked in a series of production process, and were exposed to solvent vapor mixtures. The exposure intensities were monitored with two types of diffusive samplers, one with carbon cloth (for solvents in general) and the other with water (for methyl alcohol) as adsorbents. Solvents in the adsorbents and head-space air from urine samples were analyzed with capillary FID-GC. The measured values were subjected to linear regression analysis followed by statistical evaluation for possible sex-related differences in slopes. Essentially no significant difference was detected between men and women in regression line parameters including slopes. Possible differences in the cases of acetone and toluene were discussed and excluded. With the exceptions for acetone and toluene, the present study did not detect any clear differences between men and women. In examinations of past reports, no support for the observed differences was found. The present findings deserve further study so that a solid conclusion can be formed.
Occupational exposure to organic solvents and sleep-disordered breathing.
Ulfberg, J; Carter, N; Talbäck, M; Edling, C
1997-01-01
To investigate whether people with occupational exposure to organic solvents have a higher prevalence of obstructive sleep apnea syndrome (OSAS) than the general population and to examine the relationship between snoring and exposure to organic solvents. Consecutive patients, aged 30-64 years, referred during a 3-year period to the sleep laboratory at Avesta Hospital, Sweden, because of suspected OSAS made up the patient groups. Following admission, patients underwent a simplified sleep apnea investigation and were divided into two groups, OSAS (n = 320) and snorers (n = 443). A random sample of 296 men and 289 women aged 30-64 years obtained from a register of all country residents maintained by the county tax authority served as referents (controls). Both patients and referents responded to two questionnaires, including questions about occupation, exposure to organic solvents, and other chemical and physical agents. Men with OSAS or snoring and women with snoring had more often been occupationally exposed to organic solvents than the referents, showing an almost twofold increase in risk for those exposed during whole workdays. For men, the risk of OSAS or snoring increased with increasing exposure. The result indicates that occupational exposure to organic solvents might cause sleep apnea. A new observation is that even snoring could be caused by exposure to organic solvents. It is important to elucidate whether exposure to organic solvents is a cause of OSAS, because such a finding may have important implications for prevention and treatment of sleep disturbances.
Smith, P A; Son, P S; Callaghan, P M; Jederberg, W W; Kuhlmann, K; Still, K R
1996-07-17
Components of colophony (rosin) resin acids are sensitizers through dermal and pulmonary exposure to heated and unheated material. Significant work in the literature identifies specific resin acids and their oxidation products as sensitizers. Pulmonary exposure to colophony sensitizers has been estimated indirectly through formaldehyde exposure. To assess pulmonary sensitization from airborne resin acids, direct measurement is desired, as the degree to which aldehyde exposure correlates with that of resin acids during colophony heating is undefined. Any analytical method proposed should be applicable to a range of compounds and should also identify specific compounds present in a breathing zone sample. This work adapts OSHA Sampling and Analytical Method 58, which is designed to provide airborne concentration data for coal tar pitch volatile solids by air filtration through a glass fiber filter, solvent extraction of the filter, and gravimetric analysis of the non-volatile extract residue. In addition to data regarding total soluble material captured, a portion of the extract may be subjected to compound-specific analysis. Levels of soluble solids found during personal breathing zone sampling during electronics soldering in a Naval Aviation Depot ranged from below the "reliable quantitation limit" reported in the method to 7.98 mg/m3. Colophony-spiked filters analyzed in accordance with the method (modified) produced a limit of detection for total solvent-soluble colophony solids of 10 micrograms/filter. High performance liquid chromatography was used to identify abietic acid present in a breathing zone sample.
Retrospective assessment of solvent exposure in paint manufacturing.
Glass, D C; Spurgeon, A; Calvert, I A; Clark, J L; Harrington, J M
1994-01-01
This paper describes how exposure to solvents at two large paint making sites was assessed in a study carried out to investigate the possibility of neuropsychological effects resulting from long term exposure to organic solvents. A job exposure matrix was constructed by buildings and year. A detailed plant history was taken and this was used to identify uniform exposure periods during which workers' exposure to solvents was not thought to have changed significantly. Exposure monitoring data, collected by the company before the study, was then used to characterise exposure within each uniform exposure period. Estimates were made for periods during which no air monitoring was available. Individual detailed job histories were collected for subjects and controls. The job histories were used to estimate exposure on an individual basis with the job exposure matrix. Exposure was expressed as duration, cumulative dose, and intensity of exposure. Classification of exposure by duration alone was found to result in misclassification of subjects. PMID:7951794
An analysis of historical exposures of pressmen to airborne benzene (1938-2006).
Novick, Rachel M; Keenan, James J; Gross, Sherilyn A; Paustenbach, Dennis J
2013-07-01
Benzene is an aromatic hydrocarbon that, with sufficient cumulative lifetime doses, can cause acute myelogenous leukemia. Because of its volatility and solvent properties, it was used in the printing industry in inks, ink solvents, and cleaning agents from the 1930s to the 1970s. This analysis represents the first known attempt to gather and synthesize the available data on historical airborne benzene concentrations in printing facilities and exposures to pressmen. The sources of fugitive benzene vapors from printing operations have been identified as evaporation from ink fountains, exposed sections of the printing cylinder, the paper web, the paper post exit, and spilled ink. In addition, specific activities that could lead to benzene exposure, such as filling the fountains, using solvents to clean the press, and using solvents as personal cleaning agents, potentially occurred multiple times per work period. Eighteen studies were identified that reported workplace airborne concentrations in printing facilities between 1938 and 2006. Typical benzene air concentrations, considering both personal and area samples of various durations, were as high as 200 p.p.m. in the 1930s through the 1950s, 3-35 p.p.m. in the 1960s, 1.3-16 p.p.m. in the 1970s, 0.013-1 in the 1980s, and far less than 1 p.p.m. in the 1990s and 2000s. The decrease in benzene air concentrations by the late 1970s was likely to be linked to the decreased benzene content of printing materials, increased engineering controls, and to more stringent occupational exposure limits.
Work ability score of solvent-exposed workers.
Furu, Heidi; Sainio, Markku; Hyvärinen, Hanna-Kaisa; Kaukiainen, Ari
2018-03-28
Occupational chronic solvent encephalopathy (CSE), characterized by neurocognitive dysfunction, often leads to early retirement. However, only the more severe cases are diagnosed with CSE, and little is known about the work ability of solvent-exposed workers in general. The aim was to study memory and concentration symptoms, work ability and the effect of both solvent-related and non-occupational factors on work ability, in an actively working solvent-exposed population. A questionnaire on exposure and health was sent to 3640 workers in four solvent-exposed fields, i.e. painters and floor-layers, boat builders, printers, and metal workers. The total number of responses was 1730. We determined the work ability score (WAS), a single question item of the Work Ability Index, and studied solvent exposure, demographic factors, Euroquest memory and concentration symptoms, chronic diseases, and employment status using univariate and multivariate analyses. The findings were compared to those of a corresponding national blue-collar reference population (n = 221), and a small cohort of workers with CSE (n = 18). The proportion of workers with memory and concentration symptoms was significantly associated with solvent exposure. The WAS of solvent-exposed workers was lower than that of the national blue-collar reference group, and the difference was significant in the oldest age group (those aged over 60). Solvent-exposed worker's WAS were higher than those of workers diagnosed with CSE. The WAS were lowest among painters and floor-layers, followed by metal workers and printers, and highest among boat builders. The strongest explanatory factors for poor work ability were the number of chronic diseases, age and employment status. Solvent exposure was a weak independent risk factor for reduced WAS, comparable to a level of high alcohol consumption. Even if memory and concentration symptoms were associated with higher solvent exposure, the effect of solvents on self-experienced work ability was relatively weak. This in line with the improved occupational hygiene and reduced solvent exposure levels in industrialized countries, thus the effect may be stronger in high-level exposure environments. As a single question, WAS is easily included, applicable, and recommendable in occupational screening questionnaires.
Solvent exposure and cognitive function in automotive technicians.
Bates, Michael N; Reed, Bruce R; Liu, Sa; Eisen, Ellen A; Hammond, S Katharine
2016-12-01
Automotive technicians are commonly exposed to organic and chlorinated solvents, particularly through use of cleaning products. Occupational solvent exposures have been associated with deficits in cognitive function but, to our knowledge, no previous studies have investigated automotive technicians. The purpose of the present study was to investigate whether previous exposures to n-hexane, in particular, or general solvents posed a persistent neurotoxic hazard to automotive workers. Enrolled in the study were 830 San Francisco Bay Area automotive repair workers. Each participant underwent a battery of cognitive function tests to investigate central nervous system impairment, with a primary focus on the domains of psychomotor speed, fine motor function, memory and mood. Cognitive test results regressed against estimated hexane and total solvent exposures showed little evidence of associations. Exposures to both solvents and hexane were well below the occupational exposure limits. Our results provide some reassurance about persistent neuropsychological effects in automotive workers who use solvent-based products and those who previously used hexane-containing automotive cleaning products, since this solvent is believed no longer to be used in automotive cleaning products. The lack of observed effect in this study may be attributable to low exposures, or it may reflect improved cognitive function since hexane use in automotive cleaning products was discontinued. However, impacts on results of exposure misclassification and/or the healthy worker survivor effect cannot be discounted. Irrespective of the outcome of this study, the main known neurologic effect of n-hexane is peripheral neuropathy, and such an association in automotive technicians is not excluded by these results. Copyright © 2016 Elsevier B.V. All rights reserved.
Hu, Jimmy; Cantrell, Phillip; Nand, Aklesh
2017-10-01
Urethane products that contain isocyanates are extensively used in the motor vehicle repair (MVR) industry and other industries such as furniture and cabinet-making as two-pack spray paints, clears, and adhesives. Attention has recently been refocussed on isocyanate-containing chemicals, particularly in paints. The spray painters in the MVR industry had a propensity to develop industrial asthma at a rate 80 times higher than the general public, which was previously reported in the UK. To track workers exposure to isocyanates, urine samples were collected from 196 spray painters who worked mainly in 78 MVR shops across 54 New South Wales (NSW) towns and suburbs. The biological monitoring also covered exposure testing to a wide variety of solvents including aromatic hydrocarbons, ketones, and alcohols. The main finding of the study was that 2.6% of the spray painters surveyed in the MVR industry in NSW that handled isocyanate-containing paints showed exposure to isocyanates; with 1.0% being moderately exposed, which is more than twice the current UK's Health and Safety Executive (HSE) Biological Monitoring Guidance Value (BMGV) of 1 µmol mol-1 creatinine. Potential exposures to toluene (a solvent often found in paint thinners) was monitored via hippuric acid (HA) urine levels and showed 2.6% of the spray painters surveyed to be over the US' American Conference of Government Industrial Hygienists (ACGIH) Biological Exposure Index (BEI) of 1010 mmol/mole creatinine for HA. The other solvents or their metabolites were all below their respective BEI; these comprised benzene, xylene, ethyl benzene, methyl ethyl ketone, acetone, methanol, and ethanol. These findings indicate that isocyanates and certain solvents exposure were occurring in the NSW Australia vehicle repair industry, albeit at lower levels than previous occupational biological monitoring studies that showed higher exposure levels, particularly for isocyanates. One reason for this could be the increasing use of water-based paints in the industry, resulting in lower than expected isocyanate and solvent metabolite levels detected in this more recent study. Further, the completion of sample context form, along with spot urine collection in relation to the isocyanate exposure monitoring work details will provide crucial information to interpret the biological analysis results. The development of new biomarkers of isocyanate oligomer-derived triamines should be incorporated in the assessment of isocyanate exposure in the MVR industry to provide a more complete picture of isocyanate exposure. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.
Mortality among Coast Guard Shipyard workers: A retrospective cohort study of specific exposures.
Rusiecki, Jennifer; Stewart, Patricia; Lee, Dara; Alexander, Melannie; Krstev, Srmena; Silverman, Debra; Blair, Aaron
2018-01-02
In a previous analysis of a cohort of shipyard workers, we found excess mortality from all causes, lung cancer, and mesothelioma for longer work durations and in specific occupations. Here, we expand the previous analyses by evaluating mortality associated with 5 chemical exposures: asbestos, solvents, lead, oils/greases, and wood dust. Data were gathered retrospectively for 4,702 workers employed at the Coast Guard Shipyard, Baltimore, MD (1950-1964). The cohort was traced through 2001 for vital status. Associations between mortality and these 5 exposures were calculated via standardized mortality ratios (SMRs). We found all 5 substances to be independently associated with mortality from mesothelioma, cancer of the respiratory system, and lung cancer. Findings from efforts to evaluate solvents, lead, oils/greases, and wood dust in isolation of asbestos suggested that the excesses from these other exposures may be due to residual confounding from asbestos exposure.
Occupational exposure to organic solvents: a risk factor for pulmonary veno-occlusive disease.
Montani, David; Lau, Edmund M; Descatha, Alexis; Jaïs, Xavier; Savale, Laurent; Andujar, Pascal; Bensefa-Colas, Lynda; Girerd, Barbara; Zendah, Inès; Le Pavec, Jerome; Seferian, Andrei; Perros, Frédéric; Dorfmüller, Peter; Fadel, Elie; Soubrier, Florent; Sitbon, Oliver; Simonneau, Gérald; Humbert, Marc
2015-12-01
Pulmonary veno-occlusive disease (PVOD) is a rare form of pulmonary hypertension characterised by predominant remodelling of pulmonary venules. Bi-allelic mutations in the eukaryotic translation initiation factor 2α kinase 4 (EIF2AK4) gene were recently described as the major cause of heritable PVOD, but risk factors associated with PVOD remain poorly understood. Occupational exposures have been proposed as a potential risk factor for PVOD, but epidemiological studies are lacking.A case-control study was conducted in consecutive PVOD (cases, n=33) and pulmonary arterial hypertension patients (controls, n=65). Occupational exposure was evaluated via questionnaire interview with blinded assessments using an expert consensus approach and a job exposure matrix (JEM).Using the expert consensus approach, PVOD was significantly associated with occupational exposure to organic solvents (adjusted OR 12.8, 95% CI 2.7-60.8), with trichloroethylene being the main agent implicated (adjusted OR 8.2, 95% CI 1.4-49.4). JEM analysis independently confirmed the association between PVOD and trichloroethylene exposure. Absence of significant trichloroethylene exposure was associated with a younger age of disease (54.8±21.4 years, p=0.037) and a high prevalence of harbouring bi-allelic EIF2AK4 mutations (41.7% versus 0%, p=0.015).Occupational exposure to organic solvents may represent a novel risk factor for PVOD. Genetic background and environmental exposure appear to influence the phenotypic expression of the disease. Copyright ©ERS 2015.
NASA Technical Reports Server (NTRS)
Haggerty, John S.; Lightfoot, A.; Sigalovsky, J.
1993-01-01
The topics discussed include the following: effects of solvent and polymer exposures on nitriding kinetics of high purity Si powders and on resulting phase distributions; effects of solvent and polymer exposures on Si Surface Chemistry; effects of solvent and polymeric exposures on nitriding kinetics; and fabrication of flexural test samples.
TOXICITY PATHWAY ANALYSIS IN AGING BROWN NORWAY RAT BRAIN FOLLOWING ACUTE TOLUENE EXPOSURE
The influence of aging on susceptibility to environmental stressors is poorly understood. To investigate the contribution of different life stages on response to toxicants, we examined the effects of acute exposure by oral gavage of the volatile organic solvent toluene (0.00, 0.3...
European solvent industry group generic exposure scenario risk and exposure tool
Zaleski, Rosemary T; Qian, Hua; Zelenka, Michael P; George-Ares, Anita; Money, Chris
2014-01-01
The European Solvents Industry Group (ESIG) Generic Exposure Scenario (GES) Risk and Exposure Tool (EGRET) was developed to facilitate the safety evaluation of consumer uses of solvents, as required by the European Union Registration, Evaluation and Authorization of Chemicals (REACH) Regulation. This exposure-based risk assessment tool provides estimates of both exposure and risk characterization ratios for consumer uses. It builds upon the consumer portion of the European Center for Ecotoxicology and Toxicology of Chemicals (ECETOC) Targeted Risk Assessment (TRA) tool by implementing refinements described in ECETOC TR107. Technical enhancements included the use of additional data to refine scenario defaults and the ability to include additional parameters in exposure calculations. Scenarios were also added to cover all frequently encountered consumer uses of solvents. The TRA tool structure was modified to automatically determine conditions necessary for safe use. EGRET reports results using specific standard phrases in a format consistent with REACH exposure scenario guidance, in order that the outputs can be readily assimilated within safety data sheets and similar information technology systems. Evaluation of tool predictions for a range of commonly encountered consumer uses of solvents found it provides reasonable yet still conservative exposure estimates. PMID:23361440
European solvent industry group generic exposure scenario risk and exposure tool.
Zaleski, Rosemary T; Qian, Hua; Zelenka, Michael P; George-Ares, Anita; Money, Chris
2014-01-01
The European Solvents Industry Group (ESIG) Generic Exposure Scenario (GES) Risk and Exposure Tool (EGRET) was developed to facilitate the safety evaluation of consumer uses of solvents, as required by the European Union Registration, Evaluation and Authorization of Chemicals (REACH) Regulation. This exposure-based risk assessment tool provides estimates of both exposure and risk characterization ratios for consumer uses. It builds upon the consumer portion of the European Center for Ecotoxicology and Toxicology of Chemicals (ECETOC) Targeted Risk Assessment (TRA) tool by implementing refinements described in ECETOC TR107. Technical enhancements included the use of additional data to refine scenario defaults and the ability to include additional parameters in exposure calculations. Scenarios were also added to cover all frequently encountered consumer uses of solvents. The TRA tool structure was modified to automatically determine conditions necessary for safe use. EGRET reports results using specific standard phrases in a format consistent with REACH exposure scenario guidance, in order that the outputs can be readily assimilated within safety data sheets and similar information technology systems. Evaluation of tool predictions for a range of commonly encountered consumer uses of solvents found it provides reasonable yet still conservative exposure estimates.
Le Cornet, Charlotte; Fervers, Béatrice; Pukkala, Eero; Tynes, Tore; Feychting, Maria; Hansen, Johnni; Togawa, Kayo; Nordby, Karl-Christian; Oksbjerg Dalton, Susanne; Uuksulainen, Sanni; Wiebert, Pernilla; Woldbæk, Torill; Skakkebæk, Niels E; Olsson, Ann; Schüz, Joachim
2017-06-30
Testicular germ cell tumors (TGCT) were suggested to have a prenatal environmentally related origin. The potential endocrine disrupting properties of certain solvents may interfere with the male genital development in utero . We aimed to assess the association between maternal and paternal occupational exposures to organic solvents during the prenatal period and TGCT risk in their offspring. This registry-based case control study included TGCT cases aged 14–49 y ( n =8,112) diagnosed from 1978 to 2012 in Finland, Norway, and Sweden. Controls ( n =26,264) were randomly selected from the central population registries and were individually matched to cases on year and country of birth. Occupational histories of parents prior to the child’s birth were extracted from the national censuses. Job codes were converted into solvent exposure using the Nordic job-Nordic Occupational Cancer Study Job-Exposure Matrix. Conditional logistic regression was used to estimate odds ratios (OR) and 95% confidence intervals (CI). Overall, no association was found between prenatal maternal exposure to solvents and TGCT risk. In subset analyses using only mothers for whom occupational information was available in the year of or in the year prior to the child’s birth, there was an association with maternal exposure to aromatic hydrocarbon solvents (ARHC) (OR=1.53; CI: 1.08, 2.17), driven by exposure to toluene (OR=1.67; CI: 1.02, 2.73). No association was seen for any paternal occupational exposure to solvents with the exception of exposure to perchloroethylene in Finland (OR=2.42; CI: 1.32, 4.41). This study suggests a modest increase in TGCT risk associated with maternal prenatal exposure to ARHC. https://doi.org/10.1289/EHP864.
Le Cornet, Charlotte; Fervers, Béatrice; Pukkala, Eero; Tynes, Tore; Feychting, Maria; Hansen, Johnni; Togawa, Kayo; Nordby, Karl-Christian; Oksbjerg Dalton, Susanne; Uuksulainen, Sanni; Wiebert, Pernilla; Woldbæk, Torill; Skakkebæk, Niels E.; Olsson, Ann
2017-01-01
Background: Testicular germ cell tumors (TGCT) were suggested to have a prenatal environmentally related origin. The potential endocrine disrupting properties of certain solvents may interfere with the male genital development in utero. Objectives: We aimed to assess the association between maternal and paternal occupational exposures to organic solvents during the prenatal period and TGCT risk in their offspring. Methods: This registry-based case control study included TGCT cases aged 14–49 y (n=8,112) diagnosed from 1978 to 2012 in Finland, Norway, and Sweden. Controls (n=26,264) were randomly selected from the central population registries and were individually matched to cases on year and country of birth. Occupational histories of parents prior to the child’s birth were extracted from the national censuses. Job codes were converted into solvent exposure using the Nordic job-Nordic Occupational Cancer Study Job-Exposure Matrix. Conditional logistic regression was used to estimate odds ratios (OR) and 95% confidence intervals (CI). Results: Overall, no association was found between prenatal maternal exposure to solvents and TGCT risk. In subset analyses using only mothers for whom occupational information was available in the year of or in the year prior to the child’s birth, there was an association with maternal exposure to aromatic hydrocarbon solvents (ARHC) (OR=1.53; CI: 1.08, 2.17), driven by exposure to toluene (OR=1.67; CI: 1.02, 2.73). No association was seen for any paternal occupational exposure to solvents with the exception of exposure to perchloroethylene in Finland (OR=2.42; CI: 1.32, 4.41). Conclusions: This study suggests a modest increase in TGCT risk associated with maternal prenatal exposure to ARHC. https://doi.org/10.1289/EHP864 PMID:28893722
Developmental toxicity of prenatal exposure to toluene.
Bowen, Scott E; Hannigan, John H
2006-01-01
Organic solvents have become ubiquitous in our environment and are essential for industry. Many women of reproductive age are increasingly exposed to solvents such as toluene in occupational settings (ie, long-term, low-concentration exposures) or through inhalant abuse (eg, episodic, binge exposures to high concentrations). The risk for teratogenic outcome is much less with low to moderate occupational solvent exposure compared with the greater potential for adverse pregnancy outcomes, developmental delays, and neurobehavioral problems in children born to women exposed to high concentrations of abused organic solvents such as toluene, 1,1,1-trichloroethane, xylenes, and nitrous oxide. Yet the teratogenic effects of abuse patterns of exposure to toluene and other inhalants remain understudied. We briefly review how animal models can aid substantially in clarifying the developmental risk of exposure to solvents for adverse biobehavioral outcomes following abuse patterns of use and in the absence of associated health problems and co-drug abuse (eg, alcohol). Our studies also begin to establish the importance of dose (concentration) and critical perinatal periods of exposure to specific outcomes. The present results with our clinically relevant animal model of repeated, brief, high-concentration binge prenatal toluene exposure demonstrate the dose-dependent effect of toluene on prenatal development, early postnatal maturation, spontaneous exploration, and amphetamine-induced locomotor activity. The results imply that abuse patterns of toluene exposure may be more deleterious than typical occupational exposure on fetal development and suggest that animal models are effective in studying the mechanisms and risk factors of organic solvent teratogenicity.
Solvents and Parkinson disease: A systematic review of toxicological and epidemiological evidence
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lock, Edward A., E-mail: e.lock@ljmu.ac.uk; Zhang, Jing; Checkoway, Harvey
2013-02-01
Parkinson disease (PD) is a debilitating neurodegenerative motor disorder, with its motor symptoms largely attributable to loss of dopaminergic neurons in the substantia nigra. The causes of PD remain poorly understood, although environmental toxicants may play etiologic roles. Solvents are widespread neurotoxicants present in the workplace and ambient environment. Case reports of parkinsonism, including PD, have been associated with exposures to various solvents, most notably trichloroethylene (TCE). Animal toxicology studies have been conducted on various organic solvents, with some, including TCE, demonstrating potential for inducing nigral system damage. However, a confirmed animal model of solvent-induced PD has not been developed.more » Numerous epidemiologic studies have investigated potential links between solvents and PD, yielding mostly null or weak associations. An exception is a recent study of twins indicating possible etiologic relations with TCE and other chlorinated solvents, although findings were based on small numbers, and dose–response gradients were not observed. At present, there is no consistent evidence from either the toxicological or epidemiologic perspective that any specific solvent or class of solvents is a cause of PD. Future toxicological research that addresses mechanisms of nigral damage from TCE and its metabolites, with exposure routes and doses relevant to human exposures, is recommended. Improvements in epidemiologic research, especially with regard to quantitative characterization of long-term exposures to specific solvents, are needed to advance scientific knowledge on this topic. -- Highlights: ► The potential for organic solvents to cause Parkinson's disease has been reviewed. ► Twins study suggests etiologic relations with chlorinated solvents and Parkinson's. ► Animal studies with TCE showed potential to cause damage to dopaminergic neurons. ► Need to determine if effects in animals are relevant to human exposure levels.« less
Gargouri, Imed; Khadhraoui, Moncef; Nisse, Catherine; Leroyer, Ariane; Masmoudi, Mohamed L; Frimat, Paul; Marzin, Daniel; Elleuch, Boubaker; Zmirou-Navier, Denis
2011-11-14
to assess environmental and biological monitoring of exposure to organic solvents in a glue-manufacturing company in Sfax, Tunisia. Exposure of volunteer workers, in the solvented glue-work-stations, in the control laboratory and in the storage rooms of the finished products, was assessed through indoor-air and urine measurements. Informed consent of the workers was obtained. The exposure indexes were found with high values in the solvented workshop as well as in the control laboratory and were respectively, 8.40 and 3.12. These indexes were also correlated with hexane and toluene indoor air concentrations. As to urine, the obtained results for the 2,5-hexandione and hippuric acid, metabolites of hexane and toluene, respectively, were in accord with the indoor-air measurements, with an average of 0.46 mg/l and 1240 mg/g of creatinine. This study assessed for the first time biological exposure to organic solvents used in Tunisian adhesive industries. Although values are likely to underestimate true exposure levels, some figures exceed European and American occupational exposure guidelines.
Diesel exhaust, solvents, and other occupational exposures as risk factors for wheeze among farmers.
Hoppin, Jane A; Umbach, David M; London, Stephanie J; Alavanja, Michael C R; Sandler, Dale P
2004-06-15
Farmers engage in activities that result in exposure to diesel exhaust, solvents, welding fumes, and other respiratory irritants. Using the Agricultural Health Study, a cohort of pesticide applicators in Iowa and North Carolina, we evaluated the odds of wheeze associated with nonpesticide occupational exposures. We used logistic regression models controlling for age, state, smoking, and history of asthma or atopy to evaluate odds of wheeze in the past year among the 20898 farmers who provided complete information on all covariates. Driving diesel tractors was associated with elevated odds of wheeze (odds ratio = 1.31; 95% confidence interval = 1.13, 1.52); the odds ratio for driving gasoline tractors was 1.11 (95% confidence interval = 1.02, 1.21). A duration-response relationship was observed for driving diesel tractors but not for driving gasoline tractors. Activities involving solvent exposure, including painting and use of solvents for cleaning, were associated with an increased odds of wheeze in a duration-dependent fashion. The highest odds of wheeze for farm activities were for daily painting (odds ratio = 1.82; 95% confidence interval = 0.89, 3.73), an indication of daily solvent exposure. These results add to the growing body of evidence of adverse respiratory effects of diesel exposure on the lung and suggest exposure to solvents may contribute as well.
Impaired colour vision in workers exposed to organic solvents: A systematic review.
Betancur-Sánchez, A M; Vásquez-Trespalacios, E M; Sardi-Correa, C
2017-01-01
To evaluate recent evidence concerning the relationship between the exposure to organic solvents and the impairment of colour vision. A bibliographic search was conducted for scientific papers published in the last 15 years, in the LILACS, PubMed, Science Direct, EBSCO, and Cochrane databases that included observational studies assessing the relationship between impairment in colour vision and exposure to organic solvents. Eleven studies were selected that were performed on an economically active population and used the Lanthony D-15 desaturated test (D-15d), measured the exposure to organic solvents, and included unexposed controls. It was found that there is a statistically significant relationship between the exposure to organic solvents and the presence of an impairment in colour vision. The results support the hypothesis that exposure to organic solvents could induce acquired dyschromatopsia. The evaluation of colour vision with the D-15d test is simple and sensitive for diagnosis. More studies need to be conducted on this subject in order to better understand the relationship between impaired colour vision and more severe side effects caused by this exposure. Copyright © 2016 Sociedad Española de Oftalmología. Publicado por Elsevier España, S.L.U. All rights reserved.
Ototoxic effects of occupational exposure to styrene and co-exposure to styrene and noise.
Sliwińska-Kowalska, Mariola; Zamyslowska-Szmytke, Ewa; Szymczak, Wieslaw; Kotylo, Piotr; Fiszer, Marta; Wesolowski, Wiktor; Pawlaczyk-Luszczynska, Malgorzata
2003-01-01
Ototoxicity of styrene and the synergistic action of styrene and noise have been shown in rats. The respective data in humans are scarce and equivocal. This study evaluated the effects of occupational exposure to styrene and combined exposures to styrene and noise on hearing. The study group, comprised of 290-yacht yard and plastic factory workers, was exposed to a mixture of organic solvents, having styrene as its main compound. The reference group, totaling 223 subjects, included (1) white-collar workers, exposed neither to solvents nor noise and (2) metal factory workers, exposed exclusively to noise. All subjects were assessed by means of a detailed questionnaire and underwent otorhinolaryngological and audiometric examinations. Multiple logistic regression analysis revealed almost a 4-fold (or 3.9; 95% CI = 2.4-6.2) increase in the odds of developing hearing loss related to styrene exposure. The factors adjusted for were: age, gender, current occupational exposure to noise, and exposure to noise in the past. In cases of the combined exposures to styrene and noise, the odds ratios were two to three times higher than the respective values for styrene-only and noise-only exposed subjects. The mean hearing thresholds--adjusted for age, gender, and exposure to noise--were significantly higher in the solvent-exposed group than in the unexposed reference group at all frequencies tested. A positive linear relationship existed between an averaged working life exposure to styrene concentration and a hearing threshold at the frequencies of 6 and 8 kHz. This study provides the epidemiological evidence that occupational exposure to styrene is related to an increased risk of hearing loss. Combined exposures to noise and styrene seem to be more ototoxic than exposure to noise alone.
Toxic hepatitis in occupational exposure to solvents
Malaguarnera, Giulia; Cataudella, Emanuela; Giordano, Maria; Nunnari, Giuseppe; Chisari, Giuseppe; Malaguarnera, Mariano
2012-01-01
The liver is the main organ responsible for the metabolism of drugs and toxic chemicals, and so is the primary target organ for many organic solvents. Work activities with hepatotoxins exposures are numerous and, moreover, organic solvents are used in various industrial processes. Organic solvents used in different industrial processes may be associated with hepatotoxicity. Several factors contribute to liver toxicity; among these are: species differences, nutritional condition, genetic factors, interaction with medications in use, alcohol abuse and interaction, and age. This review addresses the mechanisms of hepatotoxicity. The main pathogenic mechanisms responsible for functional and organic damage caused by solvents are: inflammation, dysfunction of cytochrome P450, mitochondrial dysfunction and oxidative stress. The health impact of exposure to solvents in the workplace remains an interesting and worrying question for professional health work. PMID:22719183
Bansal, Vibha; Delgado, Yamixa; Legault, Marc; Barletta, Gabriel
2012-02-14
The potential of enzyme catalysis in organic solvents for synthetic applications has been overshadowed by the fact that their catalytic properties are affected by organic solvents. In addition, it has recently been shown that an enzyme's initial activity diminishes considerably after prolonged exposure to organic media. Studies geared towards understanding this last drawback have yielded unclear results. In the present work we decided to use electron paramagnetic resonance spectroscopy (EPR) to study the motion of an active site spin label (a nitroxide free radical) during 96 h of exposure of the serine protease subtilisin Carlsberg to four different organic solvents. Our EPR data shows a typical two component spectra that was quantified by the ratio of the anisotropic and isotropic signals. The isotropic component, associated with a mobile nitroxide free radical, increases during prolonged exposure to all solvents used in the study. The maximum increase (of 43%) was observed in 1,4-dioxane. Based on these and previous studies we suggest that prolonged exposure of the enzyme to these solvents provokes a cascade of events that could induce substrates to adopt different binding conformations. This is the first EPR study of the motion of an active-site spin label during prolonged exposure of an enzyme to organic solvents ever reported.
Exhaled human breath analysis has become a standard technique for assessing exposure to exogenous volatile organic compounds (VOCs) such as trihalomethanes from water chlorination; aromatics, hydrocarbons, and oxygenates from fuels usage; and various chlorinated solvents from i...
Risk of liver cancer and exposure to organic solvents and gasoline vapors among Finnish workers.
Lindbohm, Marja-Liisa; Sallmén, Markku; Kyyrönen, Pentti; Kauppinen, Timo; Pukkala, Eero
2009-06-15
We investigated the association between exposure to various groups of solvents and gasoline vapors and liver cancer. A cohort of economically active Finns born between 1906 and 1945 was followed up during the period 1971-1995. The incident cases of primary liver cancer (n = 2474) were identified in a record linkage with the Finnish Cancer Registry. Occupations from the 1970 census were converted to exposures using a job-exposure matrix. Cumulative exposure was calculated as the product of estimated prevalence, level and duration of exposure, and we used Poisson regression to calculate the relative risks (RR). Among the occupations entailing exposure to organic solvents, an elevated liver cancer incidence was observed in male printers, and varnishers and lacquerers. Among men, the risk was increased in the highest exposure category of aromatic hydrocarbons [RR 1.77, 95% confidence interval (CI) 1.30-2.40], aliphatic/alicyclic hydrocarbons (RR 1.47, 95% CI 0.99-2.18), chlorinated hydrocarbons (RR 2.65, 95% CI 1.38-5.11) and "other solvents" (RR 2.14, 95% CI 1.23-3.71). Among women, the risk was increased for the group "other solvents" that includes mainly alcohols, ketones, esters and glycol ethers (RR 2.73, 95% CI 1.21-6.16). Our finding of an increased risk among workers exposed to chlorinated hydrocarbons is in line with several earlier studies on trichloroethylene. The results also suggest a link between exposure to other types of solvents and the risk of liver cancer. The possibility that alcohol consumption contributes to the observed risks cannot be totally excluded. Copyright 2008 UICC.
Nelson, N A; Robins, T G; White, R F; Garrison, R P
1994-01-01
A case-control study of chronic neurological and psychiatric disease and occupational exposure to solvents was carried out in eight automobile assembly plants. Cases included 299 subjects who were granted medical disability retirement in 1980-8. Two control groups were selected, the first from those granted retirement in the same period because of medical disability from causes unrelated to solvent exposure. The second included hourly employees from the plant population. In these facilities, solvent exposures tended to be short term and low level, although common: the average duration of exposure was 2.3 years; about 41% experienced at least one day of exposure. Of those exposed, 46% had less than one year of exposure. Results for all psychiatric disease combined (273 cases) suggested that cases had lower exposures than either control group, regardless of how exposure was expressed. Results could not be explained by conventional confounding exposures or characteristics or by usual manifestations of the healthy worker effect. By contrast, chronic neurological disease, and multiple sclerosis in particular, seemed to be associated with exposure, although few cases were identified and observed increases in risk were not statistically significant. PMID:8199679
MULTIPLE SOLVENT EXPOSURE IN HUMANS: CROSS-SPECIES EXTRAPOLATIONS
Multiple Solvent Exposures in Humans:
Cross-Species Extrapolations
(Future Research Plan)
Vernon A. Benignus1, Philip J. Bushnell2 and William K. Boyes2
A few solvents can be safely studied in acute experiments in human subjects. Data exist in rats f...
Beckman, Stella; Eisen, Ellen A.; Bates, Michael N.; Liu, Sa; Haegerstrom-Portnoy, Gunilla; Hammond, S. Katharine
2016-01-01
Occupational exposure to solvents, including n-hexane, has been associated with acquired color vision defects. Blue-yellow defects are most common and may be due to neurotoxicity or retinal damage. Acetone may potentiate the neurotoxicity of n-hexane. We present results on nonhexane solvent and hexane exposure and color vision from a cross-sectional study of 835 automotive repair workers in the San Francisco Bay Area, California (2007–2013). Cumulative exposure was estimated from self-reported work history, and color vision was assessed using the Lanthony desaturated D-15 panel test. Log-binomial regression was used to estimate prevalence ratios for color vision defects. Acquired color vision defects were present in 29% of participants, of which 70% were blue-yellow. Elevated prevalence ratios were found for nonhexane solvent exposure, with a maximum of 1.31 (95% confidence interval (CI): 0.86, 2.00) for blue-yellow. Among participants aged ≤50 years, the prevalence ratio for blue-yellow defects was 2.17 (95% CI: 1.03, 4.56) in the highest quartile of nonhexane solvent exposure and 1.62 (95% CI: 0.97, 2.72) in the highest category of exposure to hexane with acetone coexposure. Cumulative exposures to hexane and nonhexane solvents in the highest exposure categories were associated with elevated prevalence ratios for color vision defects in younger participants. PMID:27188942
Barul, Christine; Carton, Matthieu; Radoï, Loredana; Menvielle, Gwenn; Pilorget, Corinne; Bara, Simona; Stücker, Isabelle; Luce, Danièle
2018-04-05
To examine associations between occupational exposure to petroleum-based and oxygenated solvents and the risk of hypopharyngeal and laryngeal cancer. ICARE is a large, frequency-matched population-based case-control study conducted in France. Lifetime occupational history, tobacco smoking and alcohol consumption were collected. Analyses were restricted to men and included 383 cases of hypopharyngeal cancer, 454 cases of laryngeal cancer, and 2780 controls. Job-exposure matrices were used to assess exposure to five petroleum-based solvents (benzene; gasoline; white spirits; diesel, fuels and kerosene; special petroleum products) and to five oxygenated solvents (alcohols; ketones and esters; ethylene glycol; diethyl ether; tetrahydrofuran). Odds ratios (ORs) adjusted for smoking, alcohol drinking and other potential confounders and 95% confidence intervals (CI) were estimated with unconditional logistic models. No significant association was found between hypopharyngeal or laryngeal cancer risk and exposure to the solvents under study. Non-significantly elevated risks of hypopharyngeal cancer were found in men exposed to high cumulative levels of white spirits (OR = 1.46; 95% CI: 0.88-2.43) and tetrahydrofuran (OR = 2.63; 95CI%: 0.55-12.65), with some indication of a dose-response relationship (p for trend: 0.09 and 0.07 respectively). This study provides weak evidence for an association between hypopharyngeal cancer and exposure to white spirits and tetrahydrofuran, and overall does not suggest a substantial role of exposure to petroleum-based or oxygenated solvents in hypopharyngeal or laryngeal cancer risk.
Kubale, Travis L; Daniels, Robert D; Yiin, James H; Couch, James; Schubauer-Berigan, Mary K; Kinnes, Gregory M; Silver, Sharon R; Nowlin, Susan J; Chen, Pi-Hsueh
2005-12-01
A nested case-control study using conditional logistic regression was conducted to evaluate the exposure-response relationship between external ionizing radiation exposure and leukemia mortality among civilian workers at the Portsmouth Naval Shipyard (PNS), Kittery, Maine. The PNS civilian workers received occupational radiation exposure while performing construction, overhaul, repair and refueling activities on nuclear-powered submarines. The study age-matched 115 leukemia deaths with 460 controls selected from a cohort of 37,853 civilian workers employed at PNS between 1952 and 1992. In addition to radiation doses received in the workplace, a secondary analysis incorporating doses from work-related medical X rays and other occupational radiation exposures was conducted. A significant positive association was found between leukemia mortality and external radiation exposure, adjusting for gender, radiation worker status, and solvent exposure duration (OR = 1.08 at 10 mSv of exposure; 95% CI = 1.01, 1.16). Solvent exposure (including benzene and carbon tetrachloride) was also significantly associated with leukemia mortality adjusting for radiation dose, radiation worker status, and gender. Incorporating doses from work-related medical X rays did not change the estimated leukemia risk per unit of dose.
Carton, Matthieu; Barul, Christine; Menvielle, Gwenn; Cyr, Diane; Sanchez, Marie; Pilorget, Corinne; Trétarre, Brigitte; Stücker, Isabelle; Luce, Danièle
2017-01-09
Our objective was to investigate the association between head and neck cancer and occupational exposure to chlorinated, oxygenated and petroleum solvents in women. Investigation of occupational and environmental CAuses of REspiratory cancers (ICARE), a French population-based case-control study, included 296 squamous cell carcinomas of the head and neck (HNSCC) in women and 775 female controls. Lifelong occupational history was collected. Job-exposure matrices allowed to assess exposure to 5 chlorinated solvents (carbon tetrachloride; chloroform; methylene chloride; perchloroethylene; trichloroethylene), 5 petroleum solvents (benzene; special petroleum product; gasoline; white spirits and other light aromatic mixtures; diesel, fuels and kerosene) and 5 oxygenated solvents (alcohols; ketones and esters; ethylene glycol; diethyl ether; tetrahydrofuran). OR and 95% CIs, adjusted for smoking, alcohol drinking, age and geographical area, were estimated with logistic models. Elevated ORs were observed among women ever exposed to perchloroethylene (OR=2.97, 95% CI 1.05 to 8.45) and trichloroethylene (OR=2.15, 95% CI 1.21 to 3.81). These ORs increased with exposure duration (OR=3.75, 95% CI 0.64 to 21.9 and OR=4.44, 95% CI 1.56 to 12.6 for 10 years or more, respectively). No significantly increased risk of HNSCC was found for occupational exposure to the other chlorinated, petroleum or oxygenated solvents. These findings suggest that exposure to perchloroethylene or trichloroethylene may increase the risk of HNSCC in women. In our study, there is no clear evidence that the other studied solvents are risk factors for HNSCC. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.
Systemic sclerosis and occupational risk factors: role of solvents and cleaning products.
Maître, Anne; Hours, Martine; Bonneterre, Vincent; Arnaud, Joëlle; Arslan, Marie Tülin; Carpentier, Patrick; Bergeret, Alain; de Gaudemaris, Régis
2004-12-01
To analyze occupational and non-occupational exposure factors suspected of being associated with scleroderma (SSc), with a view to inculpating or excluding certain potentially toxic substances (e.g., solvents), thereby contributing to the recognition of such toxins in the field of occupational health. The study comprised 10 men and 83 women diagnosed with SSc between 1995 and 1999 (American College of Rheumatology criteria) and early SSc, and 206 age and sex matched controls. The SSc registry is all-inclusive in the French administrative departments of Isere and Savoie so controls were randomly selected from the general population (using telephone directories) in these departments to ensure full representation. Exposure factors were analyzed for each subject by a personal questionnaire, and an individual evaluation was carried out by an industrial expert. Data were analyzed by conditional logistical regression adjusting for educational level. Construction workers were at significantly higher risk of contracting SSc; odds ratio (OR) = 4.01 (95% confidence interval 1.14-14.09). Analysis by industrial experts identified exposure to certain toxic substances regularly used by these same workers as risk factors for SSc: cleaning products: OR = 1.66 (0.90-3.08) (both sexes) and OR = 1.71 (0.92-3.20) (women only); solvents: OR = 3.23 (1.58-6.63) (both sexes) and OR = 2.80 (1.28-6.11) (women only); synthetic adhesives: OR 25.36 (1.36-472.28) (on 3 exposed cases). Exposure to either cleaning products or solvents emerged as a risk factor for SSc. Exposure factors should be characterized and results of all studies compared to implement appropriate preventive measures in relevant workplaces.
A neurological evaluation of workers exposed to mixtures of organic solvents.
Maizlish, N A; Fine, L J; Albers, J W; Whitehead, L; Langolf, G D
1987-01-01
Workers with long term exposure to mixtures of organic solvents below regulatory limits have been reported to experience mild, but clinically detectable, sensory or sensorimotor polyneuropathies. In conjuction with a cross sectional study of behavioural performance a clinical neurological evaluation was conducted among printers and spray painters to examine dose response relations. All 240 subjects completed an occupational history and symptom questionnaire and underwent a clinical neurological examination. On average, subjects had been employed on their current job for six years. Classification of solvent exposure for each subject was based on exposed versus non-exposed job titles and observations during an industrial hygiene walk-through or on the measured concentration of solvents in full shift personal air samples. The average full shift solvent concentration was 302 ppm for printing plant workers and 6-13 ppm for workers at other plants. Isopropanol and hexane were the major constituents. Neurological abnormalities consistent with mild polyneuropathy were found in 16% of subjects; none was clinically significant. Exposed/non-exposed comparisons showed slightly higher frequency of symptoms in the exposed subjects which was not related to solvent level. Subjects categorised as exposed during the walk- through survey also had poorer vibratory sensation measured at the foot and diminished ankle reflexes. In multiple linear regression models, however, controlling for age, sex, alcohol intake, and examiner, no significant (p less than 0.05) relation was found between solvent concentration and poor neurological function except for two point discrimination measured at the foot. This investigation has not provided evidence for dose related adverse neurological effects from exposure to moderately low levels of solvent mixtures for a relatively short duration, although this may be due to the shortness of exposure duration, the type of solvent exposure, or to selection factors. PMID:3814530
Neurologic effects of solvents in older adults. (UW retired worker study). Final performance report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Daniell, W.E.
The possibility that previous occupational exposure to solvents might be associated with clinically significant neurological dysfunction in older adults was investigated in a cross-sectional study. Subjects included 67 painters, 22 aerospace painters and fuel cell sealers, and a comparison group of 126 carpenters. All subjects had retired from regular employment at least 1 year prior to the study. As measured by semiquantitative exposure index, the cumulative histories of lifetime occupational solvent exposure were on the average comparable in the two exposed study groups, painters and aerospace workers. The carpenters differed from the other groups in solvent exposure by several ordersmore » of magnitude. The painters had a significantly higher history of consuming alcoholic beverages than did the other two study groups. The painters had a significantly higher score on the Beck Depression Inventory, a measure of current depressive symptoms. The painters reported significantly more general neurologic symptoms than did the other two groups. The aerospace workers showed much greater evidence of possible adverse effects from former solvent exposure on current neuropsychological function than did the painters when determined by reasoning and memory tests, memory visual motor speed and motor tests. No evidence of persistent effects on liver or renal excretory function was seen in solvent exposed subjects.« less
[Exposure to solvents and tardy epilepsy: 2 clinical cases].
Bernardini, P; Scoppetta, C
1992-01-01
Organic solvents (OS) are widely used in industry and craft work. The neurotoxic effects of OS are well known in occupational exposure occurring in poor industrial hygiene conditions. There has been interest recently in a possible epileptogenic effect of OS exposure. Two cases are reported of late onset epilepsy observed in workers heavily exposed to OS. Case 1 was a 27-year-old male painter employed in a car body repair workshop. Solvent exposure was high for a few months because after his regular work, the man continued working as a car body painter in his own private concern. After a period of weakness and headache, probably indicating an excessive solvent absorption, he suffered two generalized paroxysmal seizures during sleep which necessitated hospitalization and continuous treatment with barbiturates. Case 2 was a 44-year-old male painter in a road advertising billboard factory who was continuously exposed to OS. Ten years previously he had been exposed to accidental massive inhalation of solvent vapours while opening a drum of solvents for coloured paint. Acute solvent poisoning followed and seven weeks later he suffered several epileptic episodes associated with typical EEG alterations; for many years, however, treatment was ineffective. In both cases there was neither a history of neurologic disease nor any other neurologic dysfunctions and the results of comprehensive neuroradiological studies were normal. Evidence exists of a chronological connection between high exposure to paint solvents and clinical evidence of late onset epilepsy, but it is not possible to identify a definite causal relationship.(ABSTRACT TRUNCATED AT 250 WORDS)
Olsson, Ann; Togawa, Kayo; Schüz, Joachim; Le Cornet, Charlotte; Fervers, Beatrice; Oksbjerg Dalton, Susanne; Pukkala, Eero; Feychting, Maria; Skakkebæk, Niels Erik; Hansen, Johnni
2018-06-07
Objective The present study aims to assess if parental occupational exposure to solvents or heavy metals is associated with risk of testicular germ cell tumors (TGCT) in sons in Denmark. Methods The NORD-TEST Denmark included 3421 cases diagnosed with TGCT at ages 14-49 years in Denmark between 1981 and 2014. Controls (N=14 024) selected from the central population registry were matched to cases on birth year. The Danish Supplementary Pension Fund provided parental occupational information. A job-exposure matrix was used to assign exposures, and conditional logistic regression models were used to estimate odds ratios (OR) and 95% confidence intervals (CI). Results The overall analyses showed no significant associations except for paternal exposure to a sub-group of "heavy metal(s) and solvent(s)" (OR 1.50, 95% CI 1.01-2.24). Most fathers in this category had worked in wood related jobs and were assigned exposure to chromium VI and toluene. Other sub-group analyses suggested that maternal exposure to aromatic hydrocarbon were associated with TGCT risk, in sons born in 1970-1979, and to heavy metals (chromium, iron and nickel) in sons born in 1980-1998. Conclusion NORD-TEST Denmark provides no strong support for an association between parental exposures to solvents or heavy metals and TGCT in sons, and only weak support for an association between paternal exposure to chromium and toluene and TGCT risk in sons.
Occupational exposures to solvents and metals are associated with fixed airflow obstruction.
Alif, Sheikh M; Dharmage, Shyamali C; Benke, Geza; Dennekamp, Martine; Burgess, John A; Perret, Jennifer L; Lodge, Caroline J; Morrison, Stephen; Johns, David P; Giles, Graham G; Gurrin, Lyle C; Thomas, Paul S; Hopper, John L; Wood-Baker, Richard; Thompson, Bruce R; Feather, Iain H; Vermeulen, Roel; Kromhout, Hans; Walters, E Haydn; Abramson, Michael J; Matheson, Melanie C
2017-11-01
Objectives This study investigated the associations between occupational exposures to solvents and metals and fixed airflow obstruction (AO) using post-bronchodilator spirometry. Methods We included 1335 participants from the 2002-2008 follow-up of the Tasmanian Longitudinal Health Study. Ever-exposure and cumulative exposure-unit (EU) years were calculated using the ALOHA plus job exposure matrix (JEM). Fixed AO was defined as post-bronchodilator forced expiratory volume in one second (FEV1)/forced vital capacity (FVC) <0.7 and FEV 1 /FVC
Melvin, Steven D; Jones, Oliver A H; Carroll, Anthony R; Leusch, Frederic D L
2018-05-01
Organic carrier solvents are used in aquatic toxicity testing to improve chemical solubility and facilitate the exploration of dose-response relationships. Both water- and solvent-control groups are normally included in these scenarios to ensure that the solvent itself has no effect on the test organism, but this fails to consider possible interactive effects between carrier solvents and contaminants of interest. We explored this topic by exposing Limnodynastes peronii tadpoles to a mixture of common water-soluble pharmaceuticals (diclofenac, metformin and valproic acid) in the presence and absence of the carrier solvent methanol, according to standard developmental bioassay methodology. Nuclear Magnetic Resonance (NMR) spectroscopy was applied as a platform for untargeted metabolomics, to compare broad sub-lethal hepatotoxicity in solvent- and solvent-free exposure scenarios. Considerable interactive effects were identified between the pharmaceutical mixture and a typical dose of methanol (0.003%). Specifically, pronounced differences were observed between the solvent- and solvent-free exposure groups for leucine, acetate, glutamine, citrate, glycogen, tyrosine, arginine, purine nucleotides and an unidentified metabolite at 6.53 ppm. Various other metabolites exhibited similar disparity related to the use of carrier solvent, but the interactions were non-significant. These results raise important questions about the use of carrier solvents for chemical exposures in aquatic ecotoxicology, and particularly for studies interested in sub-lethal mechanistic information and/or biomarker discovery. Copyright © 2018 Elsevier Ltd. All rights reserved.
Winder, C; Turner, P J
1992-08-01
As part of a multidisciplinary study into the health effects of solvents, workplace assessments and airborne solvent vapour monitoring was conducted in 46 spray painting workshops in the Sydney metropolitan area. Breathing-zone samples were taken from 50 apprentices and 14 experienced spray painters. An interview schedule was developed to obtain information about the use of acrylic or two-pack paint systems, the use of engineering controls, the use of personal protective equipment and the availability of material safety data sheets. Contaminants typical of the chemical products used in this industry were encountered (aromatic hydrocarbons, C5-C7 aliphatic hydrocarbons, ketones, esters). The results of airborne solvent monitoring indicate a total solvent exposure in the range 1-99% of a combined Worksafe Australia exposure standard, with a mean of 19%. Solvent exposure was highest when spraying acrylic paint in the open workshop and lowest when spraying two pack paint in a spray booth. Much the same personal protective equipment was available in all workshops, but wide variation in its use was observed. Material safety data sheets were not observed in any of the workshops.
Solvent containing processes and work practices: environmental observations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kalliokoski, P.
1986-01-01
Even though there has been a shift toward water-based or fully solid systems, organic solvents still comprise a significant occupational health hazard. Fortunately, exposure levels can nowadays be effectively controlled by proper enclosures and ventilation in most remaining applications of organic solvents, and, generally taken, the development of occupational health conditions has been favorable on the workplaces using organic solvents. When as many as 24.2% of the 2639 solvent measurements carried out by the Institute of Occupational Health in Finland exceeded the occupational health standards between 1971 and 1976, such non-compliance levels were detected only in 3.0% of the 2823more » samples taken between 1977 and 1980. The persons dealing with occupational health problems in workplaces should also be aware of the possible existence of solvent misuse. This may not develop into the level of solvent sniffing, but into a milder addiction. The workers adopt working habits that cause unnecessary exposure. Repeatedly found exceptionally high concentration levels in biological exposure tests are an indication of a possible abuse. 25 references.« less
Stevens, An-Sofie; Pirotte, Nicky; Plusquin, Michelle; Willems, Maxime; Neyens, Thomas; Artois, Tom; Smeets, Karen
2015-03-01
To investigate hydrophobic test compounds in toxicological studies, solvents like dimethylsulfoxide (DMSO) are inevitable. However, using these solvents, the interpretation of test compound-induced responses can be biased. DMSO concentration guidelines are available, but are mostly based on acute exposures involving one specific toxicity endpoint. Hence, to avoid solvent-toxicant interference, we use multiple chronic test endpoints for additional interpretation of DMSO concentrations and propose a statistical model to assess possible synergistic, antagonistic or additive effects of test compounds and their solvents. In this study, the effects of both short- (1 day) and long-term (2 weeks) exposures to low DMSO concentrations (up to 1000 µl l(-1) ) were studied in the planarian Schmidtea mediterranea. We measured different biological levels in both fully developed and developing animals. In a long-term exposure set-up, a concentration of 500 µl l(-1) DMSO interfered with processes on different biological levels, e.g. behaviour, stem cell proliferation and gene expression profiles. After short exposure times, 500 µl l(-1) DMSO only affected motility, whereas the most significant changes on different parameters were observed at a concentration of 1000 µl l(-1) DMSO. As small sensitivity differences exist between biological levels and developmental stages, we advise the use of this solvent in concentrations below 500 µl l(-1) in this organism. In the second part of our study, we propose a statistical approach to account for solvent-toxicant interactions and discuss full-scale solvent toxicity studies. In conclusion, we reassessed DMSO concentration limits for different experimental endpoints in the planarian S. mediterranea. Copyright © 2014 John Wiley & Sons, Ltd.
Dissolution of root canal sealer cements in volatile solvents.
Whitworth, J M; Boursin, E M
2000-01-01
There are few published data on the solubility profiles of endodontic sealers in solvents commonly employed in root canal retreatment. This study tested the hypothesis that root canal sealer cements are insoluble in the volatile solvents chloroform and halothane. Standardized samples (n = 5) of glass ionomer (Ketac Endo), zinc oxide-eugenol (Tubli-Seal EWT), calcium hydroxide (Apexit) and epoxy resin (AH Plus) based sealers were immersed in chloroform or halothane for 30 s, 1 min, 5 min and 10 min. Mean loss of weight was plotted against time of exposure, and differences in behaviour assessed by multiple paired t-tests (P < 0.01). Clear differences were shown in the solubility profiles of major classes of root canal sealer cements in two common volatile solvents. In comparison with other classes of material, Ketac Endo was the least soluble in chloroform and halothane (P < 0.01), with less than 1% weight loss after 10 min exposure to either solvent. Apexit had low solubility with 11.6% and 14.19% weight loss after 10 min exposure to chloroform and halothane, respectively. The difference between solvents was not significant (P > 0.01). Tubli-Seal EWT was significantly less soluble in halothane than chloroform (5.19% and 62.5% weight loss after 10 min exposure, respectively (P < 0.01)). Its solubility in halothane was not significantly different from that of Apexit. AH Plus was significantly more soluble than all other materials in both chloroform and halothane (96% and 68% weight loss after 10 min exposure, respectively (P < 0.01)). There are significant differences in the solubility profiles of major classes of root canal sealer in common organic solvents. Efforts should continue to find a more universally effective solvent for use in root canal treatment.
Beckman, Stella; Eisen, Ellen A; Bates, Michael N; Liu, Sa; Haegerstrom-Portnoy, Gunilla; Hammond, S Katharine
2016-06-01
Occupational exposure to solvents, including n-hexane, has been associated with acquired color vision defects. Blue-yellow defects are most common and may be due to neurotoxicity or retinal damage. Acetone may potentiate the neurotoxicity of n-hexane. We present results on nonhexane solvent and hexane exposure and color vision from a cross-sectional study of 835 automotive repair workers in the San Francisco Bay Area, California (2007-2013). Cumulative exposure was estimated from self-reported work history, and color vision was assessed using the Lanthony desaturated D-15 panel test. Log-binomial regression was used to estimate prevalence ratios for color vision defects. Acquired color vision defects were present in 29% of participants, of which 70% were blue-yellow. Elevated prevalence ratios were found for nonhexane solvent exposure, with a maximum of 1.31 (95% confidence interval (CI): 0.86, 2.00) for blue-yellow. Among participants aged ≤50 years, the prevalence ratio for blue-yellow defects was 2.17 (95% CI: 1.03, 4.56) in the highest quartile of nonhexane solvent exposure and 1.62 (95% CI: 0.97, 2.72) in the highest category of exposure to hexane with acetone coexposure. Cumulative exposures to hexane and nonhexane solvents in the highest exposure categories were associated with elevated prevalence ratios for color vision defects in younger participants. © The Author 2016. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Occupational exposure to organic solvents as a cause of sleep apnoea.
Edling, C; Lindberg, A; Ulfberg, J
1993-01-01
A high prevalence of sleep apnoea was found in a group of men occupationally exposed to organic solvents. Workers with long term exposure to organic solvents often report symptoms such as fatigue, forgetfulness, and concentration difficulties. These symptoms are strikingly similar to those reported by patients with obstructive sleep apnoea syndrome (OSAS). This is a frequently diagnosed disorder characterised by disturbed sleep causing psychic or somatic complications and daytime sleepiness. A study was undertaken to evaluate whether people with long term occupational exposure to organic solvents have a higher prevalence of sleep apnoea than the general population. Patients exposed to solvents (66 men) were invited to participate in a screening for sleep apnoea. A static charge sensitive bed was used for the monitoring of respiration movements and pulse oximetry during one night. A classical sleep apnoea was diagnosed if periodic respiration movement exceeded 45% of estimated sleep time and the oxygen desaturation index exceeded 6. The prevalence of sleep apnoea among the men exposed to solvents was compared with the prevalence in the general population (1.4%). The prevalence among the participating exposed men was 19.7% which gave a conservative relative risk estimate of 14.1 (95% confidence interval (95% CI) 7.5-24.2). The results indicate that exposure to organic solvents causes sleep apnoea. An alternative possibility is that people with sleep apnoea are misdiagnosed as cases of solvent induced toxic encephalopathy. The interpretation has importance for the caring of the patient. PMID:8457496
Binh, Nguyen Duy; Oanh, Nguyen Thi Kim; Parkpian, Preeda
2014-01-01
Decomposition of 2,3,7,8-Tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) present in soil under ultraviolet (UV) illumination (350-400nm) was investigated using a combination of nontoxic solvents mixed in soil and nanoscale anatase TiO2 (nTiO2) distributed on 2mm top soil surface. Three types of UV-exposure experiments were conducted: intermittent exposure (8 h/day) for 90 days and 120 days, sequential intermittent (120 days) and continuous (24 h/day) for the next 55 days, and continuous exposure for 55 days. The influence of several factors on dioxin photodegradation efficiency was investigated, including the UV absorption by the targeted dioxin, presence of catalytic nTiO2 on soil surface, solvent evaporation rate, as well as vertical gradients of solvents added into the soil columns. Results of dioxin analysis for the soil samples collected at the end of every experiment condition show that the photodegradation enhanced by the nTiO2 presence on the soil surface considerably increased the dioxin removal. Higher removal efficiencies were found for treatments with 15%wt of nTiO2 mixed in the 2-mm surface soil as compared to the 5%wt nTiO2 treatments. The highest removal efficiency (79.6%) was for the sequential intermittent-continuous UV-exposure experiment with nTiO2. Dechlorinated products of 2,3,7,8-TCDD were generally not detected which suggests degradation of targeted dioxin by C-Cl cleavage was negligible. Further modifications to improve removal efficiencies were proposed. Large-scale engineered systems may employ this integrated treatment approach which can also incorporate the reuse of the top soil containing nTiO2 and solvent vapours. With the utilization of natural sunlight such systems would be promisingly suitable for tropical conditions.
Some risk factors for non-Hodgkin's lymphoma.
Persson, B; Fredrikson, M
1999-01-01
Non-Hodgkin's lymphoma (NHL) has been subject to several epidemiological studies and various occupational and non-occupational exposures have been identified as determinants. The present study is a pooled analysis of two earlier methodologically similar case-referent studies encompassing 199 cases of NHL and 479 referents, all alive. Exposure information, mainly on occupational agents, was obtained by mailed questionnaires to the subjects. Exposure to white spirits, thinner, and aviation gasoline as well as work as a painter was connected with increased odds ratios, whereas no increased risk was noted for benzene. Farming was associated with a decreased odds ratio and exposure to phenoxy herbicides, wood preservatives, and work as a lumberjack showed increased odds ratios. Moreover, exposure to plastic and rubber chemicals and also contact with some kinds of pets appeared with increased odds ratios. Office employment and housework showed decreased odds ratios. This study indicates the importance of investigating exposures not occurring very frequently in the general population. Solvents were studied as a group of compounds but were also separated into various specific compounds. The present findings suggest that the carcinogenic property of solvents is not only related to the aromatic ones or to the occurrence of benzene contamination, but also to other types of compounds.
Organic Solvents as Risk Factor for Autoimmune Diseases: A Systematic Review and Meta-Analysis
Barragán-Martínez, Carolina; Speck-Hernández, Cesar A.; Montoya-Ortiz, Gladis; Mantilla, Rubén D.; Anaya, Juan-Manuel; Rojas-Villarraga, Adriana
2012-01-01
Background Genetic and epigenetic factors interacting with the environment over time are the main causes of complex diseases such as autoimmune diseases (ADs). Among the environmental factors are organic solvents (OSs), which are chemical compounds used routinely in commercial industries. Since controversy exists over whether ADs are caused by OSs, a systematic review and meta-analysis were performed to assess the association between OSs and ADs. Methods and Findings The systematic search was done in the PubMed, SCOPUS, SciELO and LILACS databases up to February 2012. Any type of study that used accepted classification criteria for ADs and had information about exposure to OSs was selected. Out of a total of 103 articles retrieved, 33 were finally included in the meta-analysis. The final odds ratios (ORs) and 95% confidence intervals (CIs) were obtained by the random effect model. A sensitivity analysis confirmed results were not sensitive to restrictions on the data included. Publication bias was trivial. Exposure to OSs was associated to systemic sclerosis, primary systemic vasculitis and multiple sclerosis individually and also to all the ADs evaluated and taken together as a single trait (OR: 1.54; 95% CI: 1.25–1.92; p-value<0.001). Conclusion Exposure to OSs is a risk factor for developing ADs. As a corollary, individuals with non-modifiable risk factors (i.e., familial autoimmunity or carrying genetic factors) should avoid any exposure to OSs in order to avoid increasing their risk of ADs. PMID:23284705
A physiologically-based pharmacokinetic (PBPK) model incorporating mixed enzyme inhibition was used to determine mechanism of the metabolic interactions occurring during simultaneous inhalation exposures to the organic solvents chloroform and trichloroethylene (TCE).
V...
A physiologically-based pharmacokinetic (PBPK) model incorporating mixed enzyme inhibition was used to determine the mechanism of metabolic interactions occurring during simultaneous exposures to the organic solvents chloroform and trichloroethylene (TCE). Visualization-based se...
Thorud, Syvert; Gjolstad, Merete; Ellingsen, Dag G; Molander, Paal
2005-06-01
An investigation of contemporary exposure to formaldehyde and organic solvents has been carried out during surface coating with acid-curing lacquers and paints in the Norwegian woodworking and furniture industry over a period of 3 years. The investigation covered 27 factories of different sizes and with different types of production, and totally 557 parallel formaldehyde and solvent samples were collected. The formaldehyde concentration (geometric mean) was 0.15 ppm (range 0.01-1.48 ppm) with about 10% of the samples exceeding the Norwegian occupational exposure limit of 0.5 ppm. The solvent concentration as additive effect (geometric mean) was 0.13 (range 0.0004-5.08) and about 5% of the samples exceeded the Norwegian occupational exposure limit. The most frequently occurring solvents from acid-curing lacquers were n-butyl acetate, ethanol, ethyl acetate and 1-butanol, which were found in 88-98% of the samples. Toluene, n-butyl acetate and 1-butanol were the only solvents with maximum concentrations exceeding their respective occupational exposure limits. Curtain painting machine operators were exposed to the highest concentrations of both formaldehyde (geometric mean 0.51 ppm, range 0.08-1.48 ppm) and organic solvents (additive effect, geometric mean 1.18, range 0.02-5.08). Other painting application work tasks such as automatic and manual spray-painting, manual painting and dip painting, showed on average considerably lower concentrations of both formaldehyde (geometric means 0.07-0.16 ppm) and organic solvents (additive effect, geometric mean 0.02-0.18). Non-painting work tasks also displayed moderate concentrations of formaldehyde (geometric means 0.11-0.17 ppm) and organic solvents (additive effect, geometric mean 0.04-0.07).
Helou, Rafik; Jaecker, Pierre
2014-05-01
The association between solvents and Alzheimer's disease (AD) has been the subject of several studies. Yet, only few studies have examined the various solvents separately, and the controls have rarely been monitored long enough. For these reasons and others, we believe that further studies are required. The objective of this study was to identify solvents associated with the clinicoradiological diagnostic of AD or mixed-type dementia (MD). A retrospective case-control study was performed in 156 patients followed up at the Memory Diagnostic Center of Bertinot Juel Hospital (France). The inclusion criteria were known occupation(s), a Mini-Mental State Examination (MMSE) score ≥10 at the first visit, a neuropsychological evaluation performed and a diagnosis established in our Memory Diagnostic Center. The diagnostics were crossed with 9 solvents belonging to two classes of solvents. Exposure was evaluated using French national job-exposure matrices. Certain petroleum-based solvents and fuels (i.e. mineral turpentine, diesel fuel, fuel oil and kerosene) were associated with a diagnosis of AD or MD. This association was still significant after adjustment for age, sex and education (adjusted OR: 6.5; 95% CI: 2-20). Occupational exposure to mineral turpentine and heavy fuels may be a risk factor for AD and MD.
Worker exposure to volatile organic compounds in the vehicle repair industry.
Wilson, Michael P; Hammond, S Katharine; Nicas, Mark; Hubbard, Alan E
2007-05-01
This study evaluated exposures among vehicle repair technicians to hexane, acetone, toluene, and total volatile organic compounds (VOCs). On randomly selected workdays, we observed a characteristic pattern of solvent use among 36 technicians employed in 10 repair shops, each of which used an aerosol solvent product. We obtained quantitative exposure measurements from a subset of nine technicians (employed in three of these shops) who used an aerosol product containing hexane (25-35%), acetone (45-55%), and toluene (5-10%). The time-weighted average (TWA) exposure concentration for task-length breathing zone (BZ) samples (n = 23) was 36 mg/m(3) for hexane, 50 mg/m(3) for acetone, and 10 mg/m(3) for toluene. The TWA area concentrations (n = 49) obtained contemporaneously with BZ samples ranged from 25% to 35% of the BZ concentrations. The solvent emission rate (grams emitted/task time) was correlated with the total VOC exposure concentration (R(2) = 0.45). The proportions of VOCs in the BZ samples were highly correlated (r = 0.89 to 0.95) and were similar to those of the bulk product. Continuous exposure measurements for total VOCs (n = 1238) during 26 tasks produced a mean BZ VOC "pulse" of 394 mg/m(3) within 1 min following initiation of solvent spraying. The geometric mean air speed was 5.2 meters/min in the work areas (n = 870) and was associated with 0.8 air changes per minute in the BZ. The findings suggest that vehicle repair technicians who use aerosol solvent products experience episodic, inhalation exposures to the VOCs contained in these products, and the proportions of VOCs in the breathing zone are similar to those of the bulk product. Because acetone appears to amplify the severity and duration of the neurotoxic effects of n-hexane, products formulated with both hexane and acetone should be avoided. Further evaluation of exposures to VOCs is needed in this industry, along with information on effective alternatives to aerosol solvent products.
Hearing loss among older construction workers: Updated analyses.
Dement, John; Welch, Laura S; Ringen, Knut; Cranford, Kim; Quinn, Patricia
2018-04-01
A prior study of this construction worker population found significant noise-associated hearing loss. This follow-up study included a much larger study population and consideration of additional risk factors. Data included audiometry, clinical chemistry, personal history, and work history. Qualitative exposure metrics for noise and solvents were developed. Analyses compared construction workers to an internal reference group with lower exposures and an external worker population with low noise exposure. Among participants (n = 19 127) an overall prevalence of hearing loss of 58% was observed, with significantly increased prevalence across all construction trades. Construction workers had significantly increased risk of hearing loss compared to reference populations, with increasing risk by work duration. Noise exposure, solvent exposure, hypertension, and smoking were significant risk factors in multivariate models. Results support a causal relationship between construction trades work and hearing loss. Prevention should focus on reducing exposure to noise, solvents, and cigarette smoke. © 2018 Wiley Periodicals, Inc.
Acquired intolerance to organic solvents and results of vestibular testing
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gyntelberg, F.; Vesterhauge, S.; Fog, P.
1986-01-01
Among 160 consecutive patients referred to the Clinic of Occupational Medicine, Rigshospitalet, for symptoms connected with exposure to organic solvents, 20 exhibited symptoms of acquired intolerance to minor amounts of organic solvents. Later, an additional 30 consecutive patients with symptoms of acquired intolerance were included, yielding a total of 43 men and 7 women. The characteristics of the clinical syndrome described are complaints of dizziness, nausea, and weakness after exposure to minimal solvent vapor concentrations. After having tolerated long-term occupational exposure to moderate or high air concentrations of various organic solvents, the patients became intolerant within a short period ofmore » time. Since dizziness was a frequent complaint, we tried to obtain a measure of the patients' complaints using vestibular tests. As a diagnostic test the combined vestibular tests had a sensitivity of 0.55 and a specificity of 0.87. No differences between patients with and without intolerance could be detected by the vestibular tests used. We conclude that acquired intolerance to organic solvents is a new but characteristic and easily recognizable syndrome, often with severe consequences for the patient's working ability.« less
Health effects of long-term solvent exposure among women in blue-collar occupations.
Parkinson, D K; Bromet, E J; Cohen, S; Dunn, L O; Dew, M A; Ryan, C; Schwartz, J E
1990-01-01
The relationship of solvent exposure to self-reported neurologic and somatic symptoms as well as neuropsychological performance was examined in a sample of 567 female blue collar workers who were members of the International Brotherhood of Electrical Workers (IBEW). Structured interviews were conducted at IBEW offices. Five solvent exposure categories were derived--never exposed, exposed prior to but not during the past year, exposed during the past year but not currently, currently exposed less than 50% of the time, and currently exposed more than 50% of the time. No differences among the groups on neuropsychological performance were found. On the other hand, heightened exposure was significantly related to depression, severe headaches, light-headedness, room spinning, appetite difficulties, funny taste in mouth, weakness/fatigue, rashes, and abdominal pain after controlling for the effects of seven risk factors (age, smoking, moderate-heavy alcohol consumption, severe obesity, history of physician-diagnosed chronic illness, working in a clean room, and exposure to other chemicals). These findings are consistent with Scandinavian studies of solvent-exposed male workers and point to the need for careful prospective research.
Water Quality Criteria for Colored Smokes: Solvent Yellow 33
1987-11-01
Y . ’~ ~% d .’ 4’ . TABLE 4. DISTRIBUTION OF [1 4 C]-SOLVENT YELLOW 33 IN RATS 1 hr AFTER- EXPOSURE TO SOLVENT YELLOW 33 (SY) OR SOLVENT YELLOW 33...have shown that some individuals react strongly Lo this dye. The repeat insult patch test is used most often. The subjects receive five to ten exposures...70 Neutrophils Control 5 ± 2 0 ± 0 7 ± 3 3( lO cells/g) Exposed 1300 ± 130 d 470 ± i 0 0d 290 ± 50 d a. Adapted from Henderson et al. 1985b. b. Values
Plenge-Bönig, A; Karmaus, W
1999-07-01
To examine the possible influence of exposure to toluene on human fertility. In a cross sectional study, a sample of 150 male and 90 female printing industry workers were interviewed retrospectively on reproductive experience with a modified version of the European study of infertility and subfecundity questionnaire. Exposure categories comprised job descriptions and information on exposure measurements obtained by industrial hygienists. The fecundability ratio (FR) was estimated on the basis of time to pregnancy (TTP) or periods of unprotected intercourse not leading to pregnancy (PUNP) by means of survival analysis with proportional hazard models. Confounders such as age, ethnicity, smoking, parity, pelvic inflammatory diseases, and frequency of sexual intercourse were controlled for in the analyses. 256 Periods of TTP or PUNP were reported by men and 174 by women. After exclusion of induced abortions, birth control failures, and periods without employment for female workers we were able to analyse 169 periods in men and 100 periods in women. Male workers who had been exposed to different concentrations of toluene and their partners did not show a reduction in fecundity. In women (39 periods occurred during exposure) fecundity was reduced (FR 0.47, 95% confidence interval (95% CI) 0.29 to 0.77). Neither, restriction to only the first period nor exclusion of PUNPs changed the results (FR 0.48, 95% CI 0.24 to 0.97). After considering possible biases, low daily exposure to toluene in women seems to be associated with reduced fecundity. This result is in accordance with other findings for organic solvents and supports both the hypotheses that (a) organic solvents could affect hormonal regulation, and that (b) organic solvents increase early fetal losses which in turn contributes to longer times of unprotected intercourse.
Central auditory processing effects induced by solvent exposure.
Fuente, Adrian; McPherson, Bradley
2007-01-01
Various studies have demonstrated that organic solvent exposure may induce auditory damage. Studies conducted in workers occupationally exposed to solvents suggest, on the one hand, poorer hearing thresholds than in matched non-exposed workers, and on the other hand, central auditory damage due to solvent exposure. Taking into account the potential auditory damage induced by solvent exposure due to the neurotoxic properties of such substances, the present research aimed at studying the possible auditory processing disorder (APD), and possible hearing difficulties in daily life listening situations that solvent-exposed workers may acquire. Fifty workers exposed to a mixture of organic solvents (xylene, toluene, methyl ethyl ketone) and 50 non-exposed workers matched by age, gender and education were assessed. Only subjects with no history of ear infections, high blood pressure, kidney failure, metabolic and neurological diseases, or alcoholism were selected. The subjects had either normal hearing or sensorineural hearing loss, and normal tympanometric results. Hearing-in-noise (HINT), dichotic digit (DD), filtered speech (FS), pitch pattern sequence (PPS), and random gap detection (RGD) tests were carried out in the exposed and non-exposed groups. A self-report inventory of each subject's performance in daily life listening situations, the Amsterdam Inventory for Auditory Disability and Handicap, was also administered. Significant threshold differences between exposed and non-exposed workers were found at some of the hearing test frequencies, for both ears. However, exposed workers still presented normal hearing thresholds as a group (equal or better than 20 dB HL). Also, for the HINT, DD, PPS, FS and RGD tests, non-exposed workers obtained better results than exposed workers. Finally, solvent-exposed workers reported significantly more hearing complaints in daily life listening situations than non-exposed workers. It is concluded that subjects exposed to solvents may acquire an APD and thus the sole use of pure-tone audiometry is insufficient to assess hearing in solvent-exposed populations.
Response Mechanisms in Serratia marcescens IBBPo15 During Organic Solvents Exposure.
Stancu, Mihaela Marilena
2016-12-01
Serratia marcescens strain IBB Po15 (KT315653) which possesses serratiopeptidase (ser) gene (KT894207) exhibited good solvent tolerance. During the exposure of S. marcescens IBB Po15 cells to 5 % organic solvents, n-decane was less toxic for this bacterium, compared with n-hexane, cyclohexane, ethylbenzene, toluene, and styrene. The exposure of the S. marcescens IBB Po15 cells to n-hexane, cyclohexane, ethylbenzene, toluene, and styrene induced the formation of large clusters, while in control and n-decane-exposed cells, only organization into small clusters was observed. The data obtained suggested that S. marcescens IBB Po15 cells produced some secondary metabolites (i.e., surfactant serrawettin, red pigment prodigiosin) which are well known as valuable molecules due to their large applications. The exposure of the bacterial cells to organic solvents induced secondary metabolites profile modifications. However, S. marcescens IBB Po15 possesses only alkB1, todM, rhlAB, pswP, mpr, and ser genes, the unspecific amplification of other fragments being acquired also when the primers for alkM1, xylM, ndoM, and C23DO genes were used. Modifications of DNA patterns were not depicted in S. marcescens IBB Po15 cells exposed to organic solvents.
Acute solvent exposures may contribute to automobile accidents because they increase reaction time and decrease attention, in addition to impairing other behaviors. These effects resemble those of ethanol consumption, both with respect to behavioral effects and neurological mecha...
Fabrication and Analysis of Photonic Crystals
ERIC Educational Resources Information Center
Campbell, Dean J.; Korte, Kylee E.; Xia, Younan
2007-01-01
These laboratory experiments are designed to explore aspects of nanoscale chemistry by constructing and spectroscopically analyzing thin films of photonic crystals. Films comprised of colloidal spheres and polydimethylsiloxane exhibit diffraction-based stop bands that shift reversibly upon exposure to some common solvents. Topics covered in these…
NASA Astrophysics Data System (ADS)
Asai, Satoru; Hanyu, Isamu; Nunokawa, Mitsuji; Abe, Masayuki
1991-03-01
We studied the thermal effects in a positive photoresist during post exposure baking (PEB). Infrared analysis and the reduced dissolution rate in the exposed resist suggest that the carboxylic acid is decreased and/or that ECA solvent evaporates. In order to simulate the effects, we assume that the concentration of the alkali-soluble material (carboxylic acid) decreases equivalently. Our model explains PEB and enables its effects to be simulated.
A solvent-based intelligence ink for oxygen.
Mills, Andrew; Hazafy, David
2008-02-01
A solvent-based, irreversible oxygen indicator ink is described, comprising semiconductor photocatalyst nanoparticles, a solvent-soluble redox dye, mild reducing agent and polymer. Based on such an ink, a film -- made of titanium dioxide, a blue, solvent-soluble, coloured ion-paired methylene blue dye, glycerol and the polymer zein -- loses its colour rapidly (<30 s) upon exposure to UVA light and remains colourless in an oxygen-free atmosphere, returning to its original blue colour upon exposure to air. In the latter step the rate of colour recovery is proportional to the level of ambient oxygen and the same film can be UV-activated repeatedly. The mechanism of this novel, UV-activated, solvent-based, colorimetric oxygen indicator is discussed, along with its possible applications.
Alterations in cognitive and psychological functioning after organic solvent exposure
DOE Office of Scientific and Technical Information (OSTI.GOV)
Morrow, L.A.; Ryan, C.M.; Hodgson, M.J.
1990-05-01
Exposure to organic solvents has been linked repeatedly to alterations in both personality and cognitive functioning. To assess the nature and extent of these changes more thoroughly, 32 workers with a history of exposure to mixtures of organic solvents and 32 age- and education-matched blue-collar workers with no history of exposure were assessed with a comprehensive battery of neuropsychological tests. Although both groups were comparable on measures of general intelligence, significant differences were found in virtually all other cognitive domains tested (Learning and Memory, Visuospatial, Attention and Mental Flexibility, Psychomotor Speed). In addition, Minnesota Multiphasic Personality Inventories of exposed workersmore » indicated clinically significant levels of depression, anxiety, somatic concerns and disturbances in thinking. The reported psychological distress was unrelated to degree of cognitive deficit. Finally, several exposure-related variables were associated with poorer performance on tests of memory and visuospatial ability.« less
Continous animal exposure to a mixture of dichloromethane and 1,1,1-trichloroethane
NASA Technical Reports Server (NTRS)
1975-01-01
An investigation of the effects of combined exposure of animals to dichloromethane and 1,1,1-trichloroethane was conducted using atmospheric concentrations of each solvent which had individually produced minimal measureable effects on livers. Previously established spacecraft threshold limit values for the individual solvent compounds were studied to determine validity when both were present in an astronaut's breathing environment under continuous exposure conditions. Results show that the combined effect of 90-day continuous exposure of animals to 100 ppm dichloromethane and 1000 ppm 1,1, 1-trichloroethane is no greater than the effect of each alone. While the exposed livers of mice appeared to contain slightly more fat, the degree of increased liver weight and the liver-to-body ratios are slightly lower than those measured for each solvent alone.
COMBINED EFFECTS OF SOLVENTS ON THE RAT'S AUDITORY SYSTEM: STYRENE AND TRICHLOROETHYLENE
Because exposures to toxic agents typically involve more than one substance, it is necessary to know if combined exposures pose different risks than those to single agents. any solvents have been implicated in central nervous disorders and some of them are known to produce hearin...
Neurobehavorial effects of acute exposure to four solvents: meta-abalyses
Meta-and re-analyses of the available data for the neurobehavioral effects of acute inhalation exposure to toluene were reported by Benignus et al. (2007). The present study was designed to test the generality of the toluene results in as many other solvents as possible by furthe...
Occupational exposure in dentistry and miscarriage.
Lindbohm, Marja-Liisa; Ylöstalo, Pekka; Sallmén, Markku; Henriks-Eckerman, Maj-Len; Nurminen, Tuula; Forss, Helena; Taskinen, Helena
2007-02-01
Information on the reproductive effects of chemical exposures in dental work is sparse or inconsistent. To investigate whether dental workers exposed to acrylate compounds, mercury amalgam, solvents or disinfectants are at an increased risk of miscarriage. The study was conducted among women dental workers and a comparison group of workers occupationally unexposed to dental restorative materials. Information on pregnancies was obtained from national registers and outpatient units of hospitals. Data on occupational exposure were obtained using postal questionnaires. The final study population included 222 cases of miscarriage and 498 controls (births). An occupational hygienist assessed exposure to acrylate compounds, disinfectants and solvents. Exposure to other agents was assessed on the basis of the questionnaire data. Odds ratios (ORs) and confidence intervals (CIs) were estimated using conditional logistic regression. The ORs adjusted for confounding factors were increased for moderate-exposure and high-exposure categories of mercury amalgam (OR 2.0, 95% CI 1.0 to 4.1 and OR 1.3, 95% CI 0.6 to 2.5, respectively). The risk was slightly increased for the highest-exposure category of 2-hydroxyethylmethacrylate (OR 1.4, 95% CI 0.7 to 2.6) and polymethylmethacrylate dust (OR 1.4, 95% CI 0.8 to 2.4). A slightly increased risk was also detected for likely exposure to organic solvents (OR 1.4, 95% CI 0.8 to 2.3) and disinfectants (OR 1.5, 95% CI 0.9 to 2.7). No strong association or consistent dose-response relationship was observed between exposure to chemical agents in dental work and the risk of miscarriage. A slightly increased risk was found for exposure to mercury amalgam, some acrylate compounds, solvents and disinfectants. These findings indicate that the possibility of a weak association between exposure to these agents and an increased risk of miscarriage cannot be excluded.
Agnesi, Roberto; Valentini, Flavio; Fedeli, Ugo; Rylander, Ragnar; Meneghetti, Maurizia; Fadda, Emanuela; Buja, Alessandra; Mastrangelo, Giuseppe
2011-06-01
In a district of Veneto (North-east Italy) where numerous females of childbearing age were occupationally exposed to organic solvents in nearly 400 shoe factories, a case-control study found significant associations between maternal exposures (from occupation and risky behavior) and spontaneous abortion (SAB). Thereafter, a health education campaign was undertaken to increase awareness of risk factors for pregnancy in the population. To evaluate the effects of this campaign maternal exposures and SAB risks were compared before and after the campaign. Hospital records were collected from a local hospital for SAB cases and age- residence-matched controls with normal deliveries. Information on solvent exposure, coffee and alcohol consumption, smoking and the use of medication was collected using a questionnaire. Before and after differences were tested through a modified Chi-square test and linear and logistic regressions for survey data. Odds ratios (ORs) with 95% confidence interval (CI) were estimated using logistic regression models. The consumption of coffee (P = 0.003) and alcohol (P < 0.001) was lower after than before the campaign, controlling for age at pregnancy and level of education. There were no differences in reported solvent exposure or smoking (smokers were few). The previously detected increased risks of SAB in relation to solvent exposure and coffee consumption were no longer present. The results suggest that health education campaigns might reduce harmful maternal exposures and the risk of SAB.
Recurrent Acute Liver Failure Because of Acute Hepatitis Induced by Organic Solvents: A Case Report.
Ito, Daisuke; Tanaka, Tomohiro; Akamatsu, Nobuhisa; Ito, Kyoji; Hasegawa, Kiyoshi; Sakamoto, Yoshihiro; Nakagawa, Hayato; Fujinaga, Hidetaka; Kokudo, Norihiro
2016-01-01
The authors present a case of recurrent acute liver failure because of occupational exposure to organic solvents. A 35-year-old man with a 3-week history of worsening jaundice and flu-like symptoms was admitted to our hospital. Viral hepatitis serology and autoimmune factors were negative. The authors considered liver transplantation, but the patient's liver function spontaneously recovered. Liver biopsy revealed massive infiltration of neutrophils, but the cause of the acute hepatitis was not identified. Four months after discharge, the patient's liver function worsened again. The authors considered the possibility of antinuclear antibody-negative autoimmune hepatitis and initiated steroid treatment, which was effective. Four months after discharge, the patient was admitted for repeated liver injury. The authors started him on steroid pulse therapy, but this time it was not effective. Just before the first admission, he had started his own construction company where he was highly exposed to organic solvents, and thus the authors considered organic solvent-induced hepatitis. Although urine test results for organic solvents were negative, a second liver biopsy revealed severe infiltration of neutrophils, compatible with toxic hepatitis. Again, his liver function spontaneously improved. Based on the pathology and detailed clinical course, including the patient's high exposure to organic solvents since just before the first admission, and the spontaneous recovery of his liver damage in the absence of the exposure, he was diagnosed with toxic hepatitis. The authors strongly advised him to avoid organic solvents. Since then, he has been in good health without recurrence. This is the first report of recurrent acute liver failure because of exposure to organic solvents, which was eventually diagnosed through a meticulous medical history and successfully recovered by avoiding the causative agents. In acute liver failure with an undetermined etiology, clinicians should rule out organic solvent-induced hepatitis.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kanavouras, Konstantinos; Tzatzarakis, Manolis N.; Mastorodemos, Vasileios
Motor neuron disease is a devastating neurodegenerative condition, with the majority of sporadic, non-familial cases being of unknown etiology. Several epidemiological studies have suggested that occupational exposure to chemicals may be associated with disease pathogenesis. We report the case of a patient developing progressive motor neuron disease, who was chronically exposed to pesticides and organic solvents. The patient presented with leg spasticity and developed gradually clinical signs suggestive of amyotrophic lateral sclerosis, which was supported by the neurophysiologic and radiological findings. Our report is an evidence based case of combined exposure to organochlorine (DDTs), organophosphate pesticides (OPs) and organic solventsmore » as confirmed by laboratory analysis in samples of blood and hair confirming systematic exposure. The concentration of non-specific dialkylphosphates metabolites (DAPs) of OPs in hair (dimethyphopshate (DMP) 1289.4 pg/mg and diethylphosphate (DEP) 709.4 pg/mg) and of DDTs (opDDE 484.0 pg/mg, ppDDE 526.6 pg/mg, opDDD 448.4 pg/mg, ppDDD + opDDT 259.9 pg/mg and ppDDT 573.7 pg/mg) were considerably significant. Toluene and n-hexane were also detected in blood on admission at hospital and quantified (1.23 and 0.87 {mu}g/l, respectively), while 3 months after hospitalization blood testing was found negative for toluene and n-hexane and hair analysis was provided decrease levels of HCHs, DDTs and DAPs. -- Highlights: Black-Right-Pointing-Pointer Exposure to pesticides and organic solvents might be a risk factor for sporadic MND. Black-Right-Pointing-Pointer We report a patient who developed progressive upper and lower motor neuron disease. Black-Right-Pointing-Pointer The patient had a history of occupational exposure to pesticides and solvents. Black-Right-Pointing-Pointer High DDTs' levels and increased levels of DMP and DEP were measured in his hair. Black-Right-Pointing-Pointer The patients' exposure to chemicals might have played a role in MND development.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tachi, N.; Shimotori, S.; Naruse, N.
Synthetic adhesives are widely used in various industries as well as at home. Adhesives usually contain several organic solvents which easily vaporize. Exposure can cause aplastic anemia and polyneuropathy in adults. Chronic glue sniffing results in aplastic anemia, polyneuropathy, and muscular atrophy. Inhalation of the solvent contained in adhesives, such as n-hexane, toluene, xylene, and benzene by pregnant animals can decrease the number of live fetuses and retard fetal growth. In humans, the risk of spontaneous abortion is increased in workers exposed to organic solvents. However, information is still limited about the effects of exposure to organic solvents vaporized frommore » adhesives on fetuses. In the present study, female mice were exposed throughout pregnancy to organic solvents vaporized from an adhesive to clarify the effects of the inhalation on progeny. 19 refs., 1 fig., 4 tabs.« less
Storm, J E; Rozman, K K
1998-06-01
The Occupational Safety and Health Administration (OSHA) methylene chloride Permissible Exposure Level (PEL) or 25 ppm is quantitatively derived from mouse tumor results observed in a high-exposure National Toxicology Program bioassay. Because this approach depends on controversial interspecies and low-dose extrapolations, the PEL itself has stimulated heated debate. Here, an alternative safety assessment for methylene chloride is presented. It is based on an acute human lowest-observed-adverse-effect level (LOAEL) of 200 ppm for subtle central nervous system (CNS) depression. Steep, parallel exposure-response curves for anesthetic and subanesthetic CNS effects associated with compounds mechanistically and structurally related to methylene chloride are shown to support a safety factor of two to account for inter-individual variability in response. LOAEL/no-observed-adverse-effect ratios for subtle CNS effects associated with structurally related solvents are shown to support a safety factor range of two to four to account for uncertainty in identifying a subthreshold exposure level. Anesthetic relative potencies and anesthetic/subanesthetic effect level ratios are shown to be constant for the compounds evaluated, demonstrating that subanesthetic relative potencies are also constant. Relative potencies among similarly derived occupational exposure limits (OELs) for solvents structurally related to methylene chloride are therefore used to validate the derived methylene chloride OEL range of 25-50 ppm. Because this safety assessment is based on human (rather than rodent) data and empirical (rather than theoretical) exposure-response relationships and is supported by relative potency analysis, it is a defensible alternative to to the OSHA risk assessment and should positively contribute to the debate regarding the appropriate basis and value for a methylene chloride PEL.
Smoothing Polymer Surfaces by Solvent-Vapor Exposure
NASA Astrophysics Data System (ADS)
Anthamatten, Mitchell
2003-03-01
Ultra-smooth polymer surfaces are of great importance in a large body of technical applications such as optical coatings, supermirrors, waveguides, paints, and fusion targets. We are investigating a simple approach to controlling surface roughness: by temporarily swelling the polymer with solvent molecules. As the solvent penetrates into the polymer, its viscosity is lowered, and surface tension forces drive surface flattening. To investigate sorption kinetics and surface-smoothing phenomena, a series of vapor-deposited poly(amic acid) films were exposed to dimethyl sulfoxide vapors. During solvent exposure, the surface topology was continuously monitored using light interference microscopy. The resulting power spectra indicate that high-frequency defects smooth faster than low-frequency defects. This frequency dependence was studied by depositing polymer films onto a series of 2D sinusoidal surfaces and performing smoothing experiments. Results show that the amplitudes of the sinusoidal surfaces decay exponentially with solvent exposure time, and the exponential decay constants are proportional to surface frequency. This work was performed under the auspices of the U.S. Department of Energy by the University of California Lawrence Livermore National Laboratory under contract No. W-7405-Eng-48.
Woskie, Susan R.; Gore, Rebecca; Sandler, Dale P.; Schmidt, Silke; Kamel, Freya
2017-01-01
Abstract Objective: This paper describes the retrospective exposure assessment conducted to assess occupational exposures for the Genes and Environmental Exposures in Veterans (GENEVA) study, a case–control study investigating the joint contribution of genetics and environmental exposures to the risk of amyotrophic lateral sclerosis (ALS) among military veterans. Methods: Occupational histories for 1597 study participants collected as part of the GENEVA study were the basis for this retrospective exposure assessment. The data set included 15528 jobs held from 1924 to 2010, representing 4539 unique industry and occupation (I&O) combinations. Three industrial hygiene experts were recruited to independently rate occupational exposures to specific agents previously associated with an increased risk of ALS. Utilizing information on industry, job title, tasks performed, and materials used for each job held, raters assigned exposures associated with each I&O for the ‘current time’ defined as the period after 1995 (post-1995). The exposure assessment targeted agents identified as potential occupational risk factors for ALS. Experts rated semi-quantitatively exposure intensity in five exposure categories (0–4) for Group A agents (lead, formaldehyde, hydrocarbon solvents, and chlorinated solvents) and qualitatively as yes/no (1/0) exposed for Group B agents (mercury, selenium, arsenic, polychlorinated biphenyls, electromagnetic field, pesticides, and viral agents). Confidence scores (0–3) were reported for every I&O rated based on raters’ experience with that industry and/or job. Each I&O was assigned an average exposure score of the raters and an alternative exposure rating was developed for each I&O by excluding low confidence (<2) scores before averaging. Exposure reconstruction for jobs held pre-1995 was done by comparing exposure data extracted from the OSHA Chemical Exposure and Health Database (CEHD) during pre-1995 and post-1995. For agents with limited exposure data in the CEHD, pre-1995 exposures were determined based on raters’ judgment. Results: The proportion of I&O combinations determined to be ‘exposed’ ranged from 0.1 to 26% across different agents, with the highest values corresponding to hydrocarbon solvents and the lowest to selenium. Industries with the highest proportion of exposed records include manufacturing, utilities, healthcare, and military with non-combat jobs. Analyses for raters’ reliability showed the best agreement between the raters when rating exposure to viral agents (kappa = 0.67), hydrocarbon solvents (kappa = 0.53), and lead (kappa = 0.50). The proportion of ‘exposed’ I&O combinations increased for hydrocarbon solvents, chlorinated solvents, and pesticides when exposure ratings were adjusted by raters’ confidence. Compared to post-1995, exposures in the earlier period (pre-1995) were deemed higher or the same for most of the agents and lower for formaldehyde and electromagnetic field exposures. Conclusions: Our results indicate that using raters’ confidence assessment in determining exposure scores increases both the proportion of I&O combinations regarded as exposed and the intensity scores, suggesting raters tend to be conservative in their assessment when they lack detailed knowledge of an industry or job. PMID:28355414
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lindbohm, M.L.; Hemminki, K.; Kyyroenen, P.
Spontaneous abortions were analyzed by the occupational exposure of women and their husbands, with data from the Finnish hospital discharge register and the national census. The occupations were grouped according to presumed exposure into seven categories: exposure to solvent; automobile exhaust fumes; polycyclic aromatic hydrocarbons; other chemicals; metals; textile dust; and animal microorganisms. The relative risks of spontaneous abortion were estimated with logistic regression analysis to adjust for potentially confounding factors. The broad exposure categories appeared, at most, to be weak risk factors of spontaneous abortion, because the relative risks of abortion were not significantly increased in any of themore » parental exposure groups. The analysis of detailed occupational categories showed some female and male occupations with an increased risk. The observations of increased risk related to laboratory work supported earlier findings. The high number of textile occupations with increased risk is also worth noting, and further investigations are necessary to confirm whether this is due to occupational hazards or other factors.« less
Case-control study of leatherwork and male infertility
Kurinczuk, J; Clarke, M
2001-01-01
OBJECTIVES—To test the hypothesis that leatherwork is associated with male infertility mediated through the development of oligozoospermia. The basis of any association was postulated, at the outset, to be with exposure to the solvents used in leatherwork. METHODS—All new referrals with infertility presenting in Leicestershire hospital clinics between November 1988 and September 1992 and Kettering District General Hospital from August 1990 were eligible to participate; 88.5% agreed to be interviewed. Exposure to leatherwork and work with solvents was defined by job title. Comparisons were made with fertile controls and in an analysis within men from infertile couples with oligozoospermia as the primary outcome. Effects on sperm motility and deformity were investigated secondarily. Analyses used logistic regression for binary outcomes and multilevel modelling for continuous outcomes. RESULTS—1906 men were interviewed. Compared with the fertile controls the men from infertile couples were 1.10 times (95% confidence interval (95% CI) 0.46 to 2.63; p=0.99) more likely to be leatherworkers and 1.73 times (95% CI 1.26 to 2.38; p<0.001) more likely to work with solvents. Compared with other men, leatherworkers were 1.20 times (95% CI 0.43 to 3.33; p=0.73) more likely to present with oligozoospermia and 1.65 times (95% CI 0.37 to 7.30; p=0.51) more likely to present with teratozoospermia. Being a leatherworker was associated with only a 6% reduction in sperm concentration; motility and deformity were similarly unaffected by this exposure. Work with solvents did not statistically, nor clinically, increase the risk of oligozoospermia, teratozoospermia, or asthenozoospermia. CONCLUSIONS—There was little evidence to support the hypothesis that leatherwork is associated with an increased risk of presenting with infertility or oligozoospermia. There was limited evidence that leatherwork is a risk factor for teratozoospermia. Workers with solvents were at an increased risk of presenting with infertility, although this was not mediated through effects on standard measures of semen quality; this finding merits further investigation. Keywords: leatherwork; solvents; male infertility PMID:11245737
Acute effects of an organic solvent mixture on the human central nervous system.
Muttray, Axel; Martus, P; Schachtrup, S; Müller, E; Mayer-Popken, O; Konietzko, J
2005-09-12
At workplaces, organic solvents are often used as mixtures. Nevertheless, there is limited knowledge of their acute effects on human central nervous system. Here we report the effects of a toluene-acetone mixture. In a parallel design, subgroups of 12 healthy men each were exposed to a mixture containing 25 ppm acetone and 250 ppm toluene or to air (control) in an exposure chamber for 4.5 hours. Concentrations corresponded to the German TLV (TRGS 403). Concentrations of toluene and acetone in venous blood were measured by headspace gas chromatography. Subjects were sedentary. The following tests were performed before and at the end of exposure: Questionnaires, simple reaction time, vigilance, quantitative analysis of EEG with open and closed eyes and during the Color Word Stress test, and visual evoked potentials (VEP). Blood levels were 0.14 (+/- 0.04 SD) mg toluene/l and 5.43 (+/- 1.37 SD) mg acetone/l at the end of solvent exposure. Scores of neurotoxic and irritating symptoms were not elevated during solvent exposure. Exposed subjects performed as well as control subjects on the simple reaction time test and on the vigilance test, neither reaction time nor number of hits differed significantly. A general linear model on log transformed spectral power values showed insignificant changes in EEG. In the alpha subset2-band an average reduction to 86 % was observed in exposed as compared to non exposed subjects with closed eyes, a reduction to 88 % in the theta-band with open eyes, and a reduction to 92 % in the theta-band during the Color Word Stress test. VEP P 100 latencies and amplitudes did not change. The mixture consisting of toluene and acetone did not cause any adverse acute effect. With respect to EEG data, possible subclinical effects on central nervous system cannot be excluded.
Health Hazards of Xylene: A Literature Review
T. Rajan, Sharada; Malathi, N.
2014-01-01
Xylene, an aromatic hydrocarbon is widely used in industry and medical laboratory as a solvent. It is a flammable liquid that requires utmost care during its usage. On exposure the vapours are rapidly absorbed through the lungs and the slowly through the skin. Prolonged exposure to xylene leads to significant amount of solvent accumulation in the adipose and muscle tissue. This article reviews the various acute and chronic health effects of xylene through various routes of exposure. PMID:24701554
Health hazards of xylene: a literature review.
T Rajan, Sharada; Malathi, N
2014-02-01
Xylene, an aromatic hydrocarbon is widely used in industry and medical laboratory as a solvent. It is a flammable liquid that requires utmost care during its usage. On exposure the vapours are rapidly absorbed through the lungs and the slowly through the skin. Prolonged exposure to xylene leads to significant amount of solvent accumulation in the adipose and muscle tissue. This article reviews the various acute and chronic health effects of xylene through various routes of exposure.
In vitro screening of organotin compounds and sediment extracts for cytotoxicity to fish cells.
Giltrap, Michelle; Macken, Ailbhe; McHugh, Brendan; McGovern, Evin; Foley, Barry; Davoren, Maria
2011-01-01
The present study reports an in vitro screening method for contaminants in sediment samples utilizing an RTG-2 cell line. This technique integrates cytotoxicity testing with analytical chemistry with the aim of achieving a toxicity evaluation of the sediment sample. The toxic effect of individual organotin (OT) compounds and their presence in the sediment sample is the focus of the present study; however, other contaminants are also discussed. The following OT compounds: tributyltin (TBT), dibutyltin (DBT), monobutyltin (MBT), triphenyltin (TPT), diphenyltin (DPT), and a sediment solvent extract are exposed to the RTG-2 fish cell line. Both the alamar blue (AB) and neutral red (NR) assays are used to assess cytotoxicity after 24-h and 96-h exposure. Methodology for preparation of a sediment solvent extract suitable for biological testing and analytical determination is also described. With the RTG-2 cells, the AB and NR assays had comparable sensitivity for each individual OT compound exposure after 24 h, with TPT being the most toxic compound tested. The individual OT compound concentrations required to induce a 50% toxic effect on the cells (369 ng ml⁻¹ TBT, 1,905 ng ml⁻¹ DBT) did not equate to the concentrations of these contaminants present in the sediment extract that induced a 50% effect on the cells (294 ng ml⁻¹ TBT, 109 ng ml⁻¹ DBT). The solvent extract therefore exhibited a greater toxicity, and this suggests that the toxic effects observed were not due to OT compounds alone. The presence of other contaminants in the solvent extract is confirmed with chemical analysis, warranting further toxicity testing of contaminant mixtures and exposure to the cell line to further elucidate a complete toxicity evaluation. © 2010 SETAC.
Pesch, B; Haerting, J; Ranft, U; Klimpel, A; Oelschlägel, B; Schill, W
2000-04-01
This multicentre population-based case-control study was conducted to estimate the urothelial cancer risk for occupational exposure to aromatic amines, polycyclic aromatic hydrocarbons (PAH), and chlorinated hydrocarbons besides other suspected risk factors. In a population-based multicentre study, 1035 incident urothelial cancer cases and 4298 controls matched for region, sex, and age were interviewed between 1991 and 1995 for their occupational history and lifestyle habits. Exposure to the agents under study was self-assessed as well as expert-rated with two job-exposure matrices and a job task-exposure matrix. Conditional logistic regression was used to calculate smoking adjusted odds ratios (OR) and to control for study centre and age. Urothelial cancer risk following exposure to aromatic amines was only slightly elevated. Among males, substantial exposures to PAH as well as to chlorinated solvents and their corresponding occupational settings were associated with significantly elevated risks after adjustment for smoking (PAH exposure, assessed with a job-exposure matrix: OR = 1.6, 95% CI: 1.1-2.3, exposure to chlorinated solvents, assessed with a job task-exposure matrix: OR = 1.8, 95% CI: 1.2-2.6). Metal degreasing showed an elevated urothelial cancer risk among males (OR = 2.3, 95% CI: 1.4-3.8). In females also, exposure to chlorinated solvents indicated a urothelial cancer risk. Because of small numbers the risk evaluation for females should be treated with caution. Occupational exposure to aromatic amines could not be shown to be as strong a risk factor for urothelial carcinomas as in the past. A possible explanation for this finding is the reduction in exposure over the last 50 years. Our results strengthen the evidence that PAH may have a carcinogenic potential for the urothelium. Furthermore, our results indicate a urothelial cancer risk for the use of chlorinated solvents.
Mohammadi, Michael H.; Batis, Jeffery C.; Hannigan, John H.
2007-01-01
The abuse of volatile organic solvents (inhalants) continues to be a major health concern throughout the world. Toluene, which is found in many products such as glues and household cleaners, is among the most commonly abused organic solvents. The neurobehavioral teratogenic sequelae of solvent abuse (i.e., repeated, brief inhalation exposures to very high concentrations of solvents) have not been examined thoroughly. In a preclinical model of inhalant abuse, timed-pregnant Sprague-Dawley rats were exposed to 0, 8,000, or 12,000 parts per million (ppm) for 15 min twice daily from gestation day 8 (GD8) through GD20. In the first experiment, separate groups of offspring were observed individually in an open-field on postnatal day 22 (PN22), PN42 or PN63. In the second experiment, other offspring given identical prenatal toluene exposures were observed in an “open-field” following an acute i.p. injection of amphetamine (0, 0.56, 1.78 mg/kg) on PN28. Automated measurements of distance traveled and ambulatory time were recorded. Prenatal toluene exposure resulted in small alterations in spontaneous activity compared to non-exposed rats. Prenatal exposure to 12,000 ppm toluene resulted in significant hyposensitivity to the locomotor stimulatory effects of the amphetamine challenge in male but not female rats on PN28. The results demonstrate that prenatal exposure to abuse patterns of high concentrations of toluene through inhalation can alter spontaneous and amphetamine-induced locomotor behavior in rats. The expression of these effects also appears to depend upon the postnatal age of testing. These results imply that abuse of organic solvents during pregnancy in humans may also produce long-lasting effects on biobehavioral development. PMID:17112700
Hobbies with solvent exposure and risk of non-Hodgkin lymphoma.
Colt, Joanne S; Hartge, Patricia; Davis, Scott; Cerhan, James R; Cozen, Wendy; Severson, Richard K
2007-05-01
Occupational exposure to solvents has been reported to increase non-Hodgkin lymphoma (NHL) risk in some, but not all, studies. In a population-based case-control study, we examined whether participation in selected hobbies involving solvent exposure increases NHL risk. We identified NHL cases diagnosed at ages 20-74 years between 1998 and 2000 in Iowa or metropolitan Los Angeles, Detroit, and Seattle. Controls were selected using random digit dialing or Medicare files. Computer-assisted personal interviews (551 cases, 462 controls) elicited data on model building, painting/silkscreening/artwork, furniture refinishing, and woodworking/home carpentry. Hobby participation (68% of cases, 69% of controls) was not associated with NHL risk (OR = 0.9, 95% CI = 0.7-1.2). Compared to people with none of the hobbies evaluated, those who built models had significantly lower risk (OR = 0.7, CI = 0.5-1.0), but risk did not vary with the number of years or lifetime hours. Risk estimates for the other hobbies were generally less than one, but the associations were not significant and there were no notable patterns with duration of exposure. Use of oil-based, acrylic, or water-based paints; paint strippers; polyurethane; or varnishes was not associated with NHL risk. We conclude that participation in hobbies involving exposure to organic solvents is unlikely to increase NHL risk.
Personality and long term exposure to organic solvents
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lindstroem, K.; Martelin, T.
1980-01-01
Personality, especially emotional reactions of two solvent exposed groups and a nonexposed reference group were described by means of 20 formal, content and check-list type of Rorschach variables. Another objective of the study was to explore the suitability and psychological meaning of other types of Rorschach variables than those applied earlier in the field of behavioral toxicology. The factor analyses grouped the applied variables into factors of Productivity, Ego Strength, Control of Emotionality, Defensive Introversion and Aggressiveness. One solvent group, a patient groups (N.53), was characterized by a high number of Organic signs and a low Genetic Level, indicating possiblemore » psychoorganic deterioration. The other solvent group, styrene exposed but subjectively healthy (N.98), was characterized by few emotional reactions, low Anxiety and a low number of Neurotic Signs. the long duration of exposure of the solvent patient group (mean 10.2 +/- 8.7 years) was related to variables of the Productivity factor, a finding that indicates a possible better adjustment of those exposed for a longer time. The duration of exposure of the styrene exposed group (mean 4.9 +/- 3.2 years) revealed a very slight relation to personality variables, but the mean urinary mandelic acid concentration, indicating the level of styrene exposure, correlated with increased emotional reactions. For the most part definite causal conclusions could not be drawn because of the cross-sectional design of the study.« less
David, Rhiannon M.; Jones, Huw S.; Panter, Grace H.; Winter, Matthew J.; Hutchinson, Thomas H.; Kevin Chipman, J.
2012-01-01
Organic solvents, such as dimethylsulfoxide (DMSO) and methanol are widely used as vehicles to solubilise lipophilic test compounds in toxicity testing. However, the effects of such solvents upon innate detoxification processes in aquatic organisms are poorly understood. This study assessed the effect of solvent exposure upon cytochrome P450 (CYP)-mediated xenobiotic metabolism in Daphnia magna and zebrafish larvae (4 d post fertilisation). Adult D. magna were demonstrated to have a low, but detectable, metabolism of ethoxyresorufin in vivo and this activity was not modulated by pre-exposure to DMSO or methanol (24 h, up to 0.1% and 0.05% v/v, respectively). In contrast, the metabolism of ethoxyresorufin in zebrafish larvae was significantly reduced by both solvents (0.1% and 0.05% v/v, respectively) after 24 h of exposure. In zebrafish, these observed decreases in activity towards ethoxyresorufin were accompanied by decreased expression of a variety of genes coding for drug metabolising enzymes (corresponding to CYP1, CYP2, CYP3 and UDP-glucuronyl transferase [UGT] family enzymes), measured by quantitative PCR. Reduction of gene expression and CYP1 enzyme activities by methanol (0.05% v/v) in zebrafish larvae was partially reversed by co-exposure with Aroclor 1254 (100 μg L−1). Overall this study suggests that relatively low concentrations of organic solvents can impact upon the biotransformation of certain xenobiotics in zebrafish larvae, and that this warrants consideration when assessing compounds for metabolism and toxicity in this species. PMID:22472102
Carlos-Wallace, Frolayne M.; Zhang, Luoping; Smith, Martyn T.; Rader, Gabriella; Steinmaus, Craig
2016-01-01
Benzene is an established cause of adult leukemia, but whether it is associated with childhood leukemia remains unclear. We conducted a meta-analysis in which we reviewed the epidemiologic literature on this topic and explored causal inference, bias, and heterogeneity. The exposure metrics that we evaluated included occupational and household use of benzenes and solvents, traffic density, and traffic-related air pollution. For studies of occupational and household product exposure published from 1987 to 2014, the summary relative risk for childhood leukemia was 1.96 (95% confidence interval (CI): 1.53, 2.52; n = 20). In these studies, the summary relative risk was higher for acute myeloid leukemia (summary relative risk (sRR) = 2.34, 95% CI: 1.72, 3.18; n = 6) than for acute lymphoblastic leukemia (sRR = 1.57; 95% CI: 1.21, 2.05; n = 14). The summary relative risk was higher for maternal versus paternal exposure, in studies that assessed benzene versus all solvents, and in studies of gestational exposure. In studies of traffic density or traffic-related air pollution published from 1999 to 2014, the summary relative risk was 1.48 (95% CI: 1.10, 1.99; n = 12); it was higher for acute myeloid leukemia (sRR = 2.07; 95% CI: 1.34, 3.20) than for acute lymphoblastic leukemia (sRR = 1.49; 95% CI: 1.07, 2.08) and in studies that involved detailed models of traffic pollution (sRR = 1.70; 95% CI: 1.16, 2.49). Overall, we identified evidence of associations between childhood leukemia and several different potential metrics of benzene exposure. PMID:26589707
[Chemical hazards when working with solvent glues].
Domański, Wojciech; Makles, Zbigniew
2012-01-01
Solvent glues are used in a wide variety of industries, e.g., textile, footwear and rubber. The problem of workers' exposure to solvent vapors is rarely tackled within the area of occupational safety and health in small and medium-sized enterprises. In order to assess exposure to solvents, organic solvents emitted by glues were identified in the samples of workplace air. The concentration of acetone, benzene, cyclohexane, ethylbenzene, n-hexane, methylcyclohexane, butyl acetate and toluene were determined. The obtained results evidenced the presence of cyclohexane, ethylbenzene, ethylcyclohexane, heptane, n-hexane, o-xylene, methylcyclohexane, methylcyclopentane, butyl acetate and toluene in workplace air. The concentration of those compounds in workplace air was low, usually below 0.15 of MAC. At some workstations the presence of benzene was also observed. Occupational risk was assessed at workstations where gluing took place. It showed that the risk at those workstations was medium or low.
Solvents, Ethanol, Car Crashes and Tolerance: How Risky is Inhalation of Organic Solvents?
A research program in the National Health and Environmental Effects Research Laboratory of the U.S. EPA has led to some surprising considerations regarding the potential hazard of exposure to low concentrations of solvent vapors. This program involved conducting experiments to ch...
ODC-Free Solvent Implementation Issues for Vulcanized Rubber and Bond Systems
NASA Technical Reports Server (NTRS)
Hodgson, James R.; McCool, Alex (Technical Monitor)
2001-01-01
Thiokol Propulsion has worked extensively to replace 1,1,1-trichloroethane (TCA) with ozone depleting chemicals (ODC)-free solvents for use in the manufacture of the Reusable Solid Rocket Motor (RSRM) for the Space Shuttle Program. As Thiokol has transitioned from sub-scale to full-scale testing and implementation of these new solvents, issues have been discovered which have required special attention. The original intent of Thiokol's solvent replacement strategy was to replace TCA with a single drop-in solvent for all equivalent applications. We have learned that a single candidate does not exist for replacing TCA. Solvent incompatibility with process materials has caused us to seek for niche solvents and/or processing changes that provide an ODC-free solution for special applications. This paper addresses some of the solvent incompatibilities, which have lead to processes changes and possible niche solvent usage. These incompatibilities were discovered during full-scale testing of ODC-free solvents and relate to vulcanized rubber and bond systems in the RSRM. Specifically, the following items are presented: (1) Cure effects of d-limonene based solvents on Silica Filled Ethylene Propylene Diene Monomer (SF-EPDM) rubber. During full-scale test operations, Thiokol discovered that d-limonene (terpene) based solvents inhibit the cure of EPDM rubber. Subsequent testing showed the same issue with Nitrile Butadiene Rubber (NBR). Also discussed are efforts to minimize uncured rubber exposure to solvents; and (2) Cured bond system sensitivity to ODC-free solvents. During full scale testing it was discovered that a natural rubber to steel vulcanized bond could degrade after prolonged exposure to ODC-free solvents. Follow on testing showed that low vapor pressure and residence time seemed to be most likely cause for failure.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Redlich, C.A.; West, A.B.; Fleming, L.
1990-09-01
The clinical characteristics, laboratory results, and liver biopsy findings of seven workers with toxic liver injury associated with exposure to several solvents, including substantial levels of the widely used solvent dimethylformamide, are presented. Three patients had short exposure (less than 3 months), four long exposure (greater than 1 year). Among those with brief exposure, symptoms included anorexia, abdominal pain, and disulfiram-type reaction. Aminotransferases were markedly elevated with the ratio of alanine aminotransferase to aspartate aminotransferase always greater than 1. Liver biopsy showed focal hepatocellular necrosis and microvesicular steatosis with prominence of smooth endoplasmic reticulum, complex lysosomes, and pleomorphic mitochondria withmore » crystalline inclusions. Among workers with long exposure, symptoms were minimal and enzyme elevations modest. Biopsies showed macrovesicular steatosis, pleomorphic mitochondria without crystalloids, and prominent smooth endoplasmic reticulum, but no evidence of persisting acute injury or fibrosis. Abnormal aminotransferases in both groups may persist for months after removal from exposure, but progression to cirrhosis in continually exposed workers was not observed. We conclude that exposure of these workers to solvents, chiefly dimethylformamide, may result in two variants of toxic liver injury with subtle clinical, laboratory, and morphological features. This may be readily overlooked if occupational history and biopsy histology are not carefully evaluated.« less
Solvent oriented hobbies and the risk of systemic sclerosis.
Nietert, P J; Sutherland, S E; Silver, R M; Pandey, J P; Dosemeci, M
1999-11-01
To examine whether those participating in solvent oriented hobbies (SOH) are at greater risk of developing systemic sclerosis (SSc), and if the association is modified by the presence of the anti-Scl70 antibody. Patients with SSc and controls were recruited from a university hospital rheumatology clinic. Recreational hobby and occupational histories were obtained along with blood samples. Cumulative scores were created for participation in SOH. Logistic regression was used to calculate odds ratios associated with SOH exposure after adjustment for sex, age at diagnosis, and occupational solvent exposure, and to examine the association between SOH exposure and the presence of anti-Scl70. Solvent exposure based on hobbies and occupations was determined for 178 cases (141 women, 37 men) and 200 controls (138 women, 62 men). Overall participation in SOH was not associated with SSc. However, odds of high cumulative SOH exposure was 3 times greater in those patients with SSc testing positive for the anti-Scl70 antibody compared to patients testing negative (OR 2.9, 95% CI 1.1, 7.9), and twice as great as controls (OR 2.5, 95% CI 1.1, 5.9). While patients with SSc did not participate more often in SOH than controls over all, odds of high cumulative SOH exposure was greater among patients with SSc testing positive for anti-Scl70 compared to those testing negative and compared to controls. These results provide further evidence that environmental agents may play a role in the development of Ssc.
Chronic lymphatic leukaemia and engine exhausts, fresh wood, and DDT: a case-referent study.
Flodin, U; Fredriksson, M; Persson, B; Axelson, O
1988-01-01
The effect of potential risk factors for chronic lymphatic leukaemia was evaluated in a case-referent study encompassing 111 cases and 431 randomised referents, all alive. Information on exposure was obtained by questionnaires posted to the subjects. Crude rate ratios were increased for occupational exposure to solvents. DDT, engine exhausts, fresh wood (lumberjacks, paper pulp workers, and sawmill workers, for example) and also in farming. Further analysis of the material by means of the Miettinen confounder score technique reduced the number of rate ratios significantly exceeding unity to encompass only occupational exposure to engine exhaust, fresh wood, DDT, and contact with horses. PMID:2449239
Brender, Jean D; Shinde, Mayura U; Zhan, F Benjamin; Gong, Xi; Langlois, Peter H
2014-11-19
Some studies have noted an association between maternal occupational exposures to chlorinated solvents and birth defects in offspring, but data are lacking on the potential impact of industrial air emissions of these solvents on birth defects. With data from the Texas Birth Defects Registry for births occurring in 1996-2008, we examined the relation between maternal residential proximity to industrial air releases of chlorinated solvents and birth defects in offspring of 60,613 case-mothers and 244,927 control-mothers. Maternal residential exposures to solvent emissions were estimated with metrics that took into account residential distances to industrial sources and annual amounts of chemicals released. Logistic regression was used to generate odds ratios and 95% confidence intervals for the associations between residential proximity to emissions of 14 chlorinated solvents and selected birth defects, including neural tube, oral cleft, limb deficiency, and congenital heart defects. All risk estimates were adjusted for year of delivery and maternal age, education, race/ethnicity, and public health region of residence. Relative to exposure risk values of 0, neural tube defects were associated with maternal residential exposures (exposure risk values >0) to several types of chlorinated solvents, most notably carbon tetrachloride (adjusted odds ratio [aOR] 1.42, 95% confidence interval [CI] 1.09, 1.86); chloroform (aOR 1.40, 95% CI 1.04, 1.87); ethyl chloride (aOR 1.39, 95% CI 1.08, 1.79); 1,1,2-trichloroethane (aOR 1.56, 95% CI 1.11, 2.18); and 1,2,3-trichloropropane (aOR 1.49, 95% CI 1.08, 2.06). Significant associations were also noted between a few chlorinated solvents and oral cleft, limb deficiency, and congenital heart defects. We observed stronger associations between some emissions and neural tube, oral cleft, and heart defects in offspring of mothers 35 years or older, such as spina bifida with carbon tetrachloride (aOR 2.49, 95% CI 1.09, 5.72), cleft palate with 1,2-dichloroethane (aOR 1.93, 95% 1.05, 3.54), cleft lip with or without cleft palate with ethyl chloride (aOR 1.81, 95% CI 1.06, 3.07), and obstructive heart defects with trichloroethylene (aOR 1.43, 95% CI 1.08, 1.88). These findings suggest that maternal residential proximity to industrial emissions of chlorinated solvents might be associated with selected birth defects in offspring, especially among older mothers.
Prenatal Exposure to Paint Thinner Alters Postnatal Development and Behavior in Mice
Malloul, Hanaa; Mahdani, Ferdaousse M.; Bennis, Mohammed; Ba-M’hamed, Saadia
2017-01-01
Occupational exposure and sniffing of volatile organic solvents continue to be a worldwide health problem, raising the risk for teratogenic sequelae of maternal inhalant abuse. Real life exposures usually involve simultaneous exposures to multiple solvents, and almost all the abused solvents contain a mixture of two or more different volatile compounds. However, several studies examined the teratogenicity due to industrial exposure to a single volatile solvent but investigating the teratogenic potential of complex chemical mixture such as thinner remains unexplored. This study was undertaken to evaluate developmental neurotoxicity of paint thinner using a mouse model. Mated female mice (N = 21) were, therefore, exposed to repeated and brief inhalation episodes of 0, 300 or 600 ppm of thinner during the entire period of pregnancy. Females weigh was recorded and their standard fertility and reproductive parameters were assessed. After birth postnatal day 1 (PND1), offspring (N = 88) length and body weight were measured in a daily basis. At PND5, the pups were assessed for their postnatal growth, physical maturation, reflex development, neuromotor abilities, sensory function, activity level, anxiety, depression, learning and memory functions. At adulthood, structural changes of the hippocampus were examined by estimating the total volume of the dentate gyrus. Except one case of thinner induced abortion at the higher dose, our results showed that the prenatal exposure to the solvent did not cause any maternal toxicity or decrease in the viability of the offspring. Therefore, a lower birth weight, decrease in the litter size and delayed reflexes ontogeny were registered in prenatally exposed offspring to both 300 ppm and 600 ppm of thinner. In addition, prenatally exposure to thinner resulted in increased anxiolytic- and depression-like behaviors. In contrast, impaired learning and memory functions and decreased hippocampal dentate gyrus volume were revealed only in the prenatally treated offspring by 600 ppm of thinner. Based on these results, we can conclude that prenatally exposure to paint thinner causes a long-lasting developmental neurotoxicity and alters a wide range of behavioral functions in mice. This shows the risk that mothers who abuse thinner paint expose their offspring. PMID:28959195
Kawai, Toshio; Sumino, Kimiaki; Ohashi, Fumiko; Ikeda, Masayuki
2011-01-01
To facilitate urine sample preparation prior to head-space gas-chromatographic (HS-GC) analysis. Urine samples containing one of the five solvents (acetone, methanol, methyl ethyl ketone, methyl isobutyl ketone and toluene) at the levels of biological exposure limits were aspirated into a vacuum tube via holder, a device commercially available for venous blood collection (the vacuum tube method). The urine sample, 5 ml, was quantitatively transferred to a 20-ml head-space vial prior to HS-GC analysis. The loaded tubes were stored at +4 ℃ in dark for up to 3 d. The vacuum tube method facilitated on-site procedures of urine sample preparation for HS-GC with no significant loss of solvents in the sample and no need of skilled hands, whereas on-site sample preparation time was significantly reduced. Furthermore, no loss of solvents was detected during the 3-d storage, irrespective of hydrophilic (acetone) or lipophilic solvent (toluene). In a pilot application, high performance of the vacuum tube method in sealing a sample in an air-tight space succeeded to confirm that no solvent will be lost when sealing is completed within 5 min after urine voiding, and that the allowance time is as long as 30 min in case of toluene in urine. The use of the holder-vacuum tube device not only saves hands for transfer of the sample to air-tight space, but facilitates sample storage prior to HS-GC analysis.
Tetrachloroethylene Exposure and Bladder Cancer Risk: A Meta-Analysis of Dry-Cleaning-Worker Studies
Vlaanderen, Jelle; Straif, Kurt; Ruder, Avima; Blair, Aaron; Hansen, Johnni; Lynge, Elsebeth; Charbotel, Barbara; Loomis, Dana; Kauppinen, Timo; Kyyronen, Pentti; Pukkala, Eero; Weiderpass, Elisabete
2014-01-01
Background: In 2012, the International Agency for Research on Cancer classified tetrachloroethylene, used in the production of chemicals and the primary solvent used in dry cleaning, as “probably carcinogenic to humans” based on limited evidence of an increased risk of bladder cancer in dry cleaners. Objectives: We assessed the epidemiological evidence for the association between tetrachloroethylene exposure and bladder cancer from published studies estimating occupational exposure to tetrachloroethylene or in workers in the dry-cleaning industry. Methods: Random-effects meta-analyses were carried out separately for occupational exposure to tetrachloroethylene and employment as a dry cleaner. We qualitatively summarized exposure–response data because of the limited number of studies available. Results: The meta-relative risk (mRR) among tetrachloroethylene-exposed workers was 1.08 (95% CI: 0.82, 1.42; three studies; 463 exposed cases). For employment as a dry cleaner, the overall mRR was 1.47 (95% CI: 1.16, 1.85; seven studies; 139 exposed cases), and for smoking-adjusted studies, the mRR was 1.50 (95% CI: 0.80, 2.84; 4 case–control studies). Conclusions: Our meta-analysis demonstrates an increased risk of bladder cancer in dry cleaners, reported in both cohort and case–control studies, and some evidence for an exposure–response relationship. Although dry cleaners incur mixed exposures, tetrachloroethylene could be responsible for the excess risk of bladder cancer because it is the primary solvent used and it is the only chemical commonly used by dry cleaners that is currently identified as a potential bladder carcinogen. Relatively crude approaches in exposure assessment in the studies of “tetrachloroethylene-exposed workers” may have attenuated the relative risks. Citation: Vlaanderen J, Straif K, Ruder A, Blair A, Hansen J, Lynge E, Charbotel B, Loomis D, Kauppinen T, Kyyronen P, Pukkala E, Weiderpass E, Guha N. 2014. Tetrachloroethylene exposure and bladder cancer risk: a meta-analysis of dry-cleaning-worker studies. Environ Health Perspect 122:661–666; http://dx.doi.org/10.1289/ehp.1307055 PMID:24659585
Gianoli, Enrica; Brusoni, Daniela; Cornaggia, Nicoletta; Saretto, Gianni
2012-01-01
In the present work the chemical compositions of the products used in shoes manufacturing are reported. The data were collected over the period 2004-2007 in 156 shoe factories in Vigevano area during a study aiming the evaluation of safety conditions and occupational exposure to hazardous chemicals of the employees. The study was part of a regional project for "Occupational cancer prevention in the footwear industry". In the first phase of the study an information form on production cycle, products used and their composition was filled during preliminary audit. In the second phase of the study an in depth qualitative/quantitative evaluation of professional exposure was conducted in 13 selected shoe factories. Data analysis showed the increase in use of water-based adhesives at expense of solvent-based adhesives, the reduction to less than 3.5 weight %, and up to 1 weight %, of n-hexane concentration in solvent mixtures, the increase in use of products containing less hazardous ketones, esters, cyclohexane and heptane. Only in very few cases, products containing from 4 to 12 weight% of toluene were used. These data attest a positive trend in workers risks prevention in shoes industry.
Brain damage in a large cohort of solvent abusers.
Al-Hajri, Zahra; Del Bigio, Marc R
2010-04-01
The neuropathology of solvent inhalation consists of patchy myelin loss with white matter macrophages that contain granular inclusions. It has been described only in a small number of cases. We sought to characterize the abnormalities in greater detail. In a retrospective study from 1995 to 2009, we encountered 88 autopsy cases with documented history of solvent abuse by inhalation and 1 with industrial exposure. Among these are 6 fetuses and infants with maternal exposure, 23 children (12-17 years), and 60 adults (18-66 years). Available brain samples from 75 cases were stained with solochrome cyanein (to demonstrate myelin) and periodic acid-Schiff (PAS) (to highlight the inclusions). Forty brains of ethanol and/or illicit drug exposed individuals and ten cases of multiple sclerosis were examined as controls. We found that 16 cases (age 23-49, median 37 years) had well-established leukoencephalopathy with multifocal myelin loss and abundant macrophages that stain with PAS and which contain birefringent inclusions. Six cases (age 15-55, median 27 years) had early leukoencephalopathy with scattered macrophages but no obvious myelin changes. Clusters of PAS-staining but non-birefringent macrophages were seen in 2/10 cases of (active) multiple sclerosis and in none of the ethanol/drug exposed brains. Ultrastructurally, inclusions from solvent cases differed from multiple sclerosis cases. Although exposure to solvents is impossible to quantify, there appears to be a duration-dependent effect. Brain damage related to solvent abuse can begin within only a few years of the onset. In the context of substance abuse, the changes are relatively specific for solvent inhalation and do not appear to result from demyelination alone. Interaction with ethanol cannot be excluded as a compounding risk factor.
Aqueous alternatives for metal and composite cleaning
NASA Technical Reports Server (NTRS)
Quitmeyer, Joann
1994-01-01
For many years the metalworking industry has cleaned metal and composite substrates with chlorinated solvents. Recently, however, health and disposal related environmental concerns have increased regarding chlorinated solvents, including 1,1,1-trichloroethane, trichloroethylene, methylene chloride, or Freon'. World leaders have instituted a production ban of certain ozone depleting chlorofluorocarbons (CFC's) by 1996. The Occupational Safety and Health Administration (OSHA) has instituted worker vapor exposure limitations for virtually all of the solvents used in solvent-based cleaners. In addition, the United States Environmental Protection Agency (EPA) has defined nearly all solvent-based cleaners as 'hazardous'. Cradle to grave waste responsibility is another reason manufacturers are trying to replace chlorinated solvents in their cleaning processes. Because of these factors, there now is a world wide effort to reduce and/or eliminate the use of chlorinated solvents for industrial cleaning. Waterbased cleaners are among the alternatives being offered to the industry. New technology alkaline cleaners are now available that can be used instead of chlorinated solvents in many cleaning processes. These waterbased cleaners reduce the release of volatile organic compounds (VOC's) by as much as 99 percent. (The definition and method of calculation of VOC's now varies from region to region.) Hazardous waste generation can also be significantly reduced or eliminated with new aqueous technology. This in turn can ease worker exposure restrictions and positively impact the environment. This paper compares the chemical and physical properties of this aqueous cleaners versus chlorinated solvents.
Gallagher, Lisa G; Webster, Thomas F; Aschengrau, Ann
2017-03-11
Investigating the effects of prenatal and childhood exposures on behavioral health outcomes in adolescence is challenging given the lengthy period between the exposure and outcomes. We conducted a retrospective cohort study in Cape Cod, Massachusetts to evaluate the impact of prenatal and early childhood exposure to tetrachloroethylene (PCE)-contaminated drinking water on the occurrence of risk-taking behaviors as a teenager. An increased occurrence of risk-taking behaviors, particularly illicit drug use, was observed in those highly exposed to PCE. We hypothesized that there may be other sources of prenatal solvent exposure such as maternal consumption of alcoholic beverages during pregnancy which might modify the previously observed associations between PCE and risk-taking behaviors and so we conducted an exploratory analysis using available cohort data. The current report presents the results of these analyses and describes the difficulties in conducting research on long-term behavioral effects of early life exposures. The exploratory analysis compared a referent group of subjects with no early life exposure to PCE or alcohol (n = 242) to subjects with only alcohol exposure (n = 201), subjects with only PCE exposure (n = 361), and subjects with exposure to both PCE and alcohol (n = 302). Surveys completed by the subject's mother included questions on prenatal alcoholic beverage consumption and available confounding variables such as cigarette smoking and marijuana use. Surveys completed by the subjects included questions on risk-taking behaviors such as alcoholic beverage consumption and illicit drug use as a teenager and available confounding variables. PCE exposure was modeled using a leaching and transport algorithm embedded in water distribution system modeling software that estimated the amount of PCE delivered to a subject's residence during gestation and early childhood. Subjects with early life exposure to both PCE and alcohol had an increased risk of using two or more major drugs as a teen (RR = 1.9 (95% CI 1.2, 3.0)) compared to unexposed subjects. Increased risks for only PCE exposure (RR = 1.6 (95% CI 1.0, 2.4) and only alcohol exposure (RR = 1.3 (95% CI 0.7, 2.1)) were also evident but were smaller than the increased risk associated with both exposures. While available confounding variables were controlled, many relevant social risk factors were not obtained due to limitations in the retrospective study design. This exploratory analysis found evidence for an additive effect of early life exposure to PCE and alcohol on the risk of use of multiple illicit drugs as a teenager. Because of numerous limitations in this retrospective study, further research is needed to examine longstanding behavioral effects of early life exposures. To be most informative, this research should involve long-term prospective data collection.
McKee, Richard H; Tibaldi, Rosalie; Adenuga, Moyinoluwa D; Carrillo, Juan-Carlos; Margary, Alison
2018-02-01
The European chemical control regulation (REACH) requires that data on physical/chemical, toxicological and environmental hazards be compiled. Additionally, REACH requires formal assessments to ensure that substances can be safely used for their intended purposes. For health hazard assessments, reference values (Derived No Effect levels, DNELs) are calculated from toxicology data and compared to estimated exposure levels. If the ratio of the predicted exposure level to the DNEL, i.e. the Risk Characterization Ratio (RCR), is less than 1, the risk is considered controlled; otherwise, additional Risk Management Measures (RMM) must be applied. These requirements pose particular challenges for complex substances. Herein, "white spirit", a complex hydrocarbon solvent, is used as an example to illustrate how these procedures were applied. Hydrocarbon solvents were divided into categories of similar substances. Representative substances were identified for DNEL determinations. Adjustment factors were applied to the no effect levels to calculate the DNELs. Exposure assessments utilized a standardized set of generic exposure scenarios (GES) which incorporated exposure predictions for solvent handling activities. Computer-based tools were developed to automate RCR calculations and identify appropriate RMMs, allowing consistent communications to users via safety data sheets. Copyright © 2017 ExxonMobil Biomedical Sciences Inc. Published by Elsevier Inc. All rights reserved.
Noise-induced hearing loss: a military perspective.
Pfannenstiel, Travis J
2014-10-01
To summarize relevant literature occurring over the past 12-18 months forwarding understanding of noise-induced hearing loss in relation to military service. Hearing loss prior to entry into military service is highly predictive of subsequent hearing loss and hearing loss disability. Tightly controlled organic solvent exposure may not be a significant risk factor for noise-induced hearing loss. Increasingly detailed analysis of high intensity noise, impulse and blast noise exposures, and the methods used to mitigate these exposures are leading to breakthroughs in understanding and predicting hearing loss in military service. Prevention, mitigation, treatment, and prediction of the effects of hazardous noise exposure in military service continue to require a multidisciplinary team of individuals from around the world fully aware of the detrimental effect to service members and their societies of hearing loss disability.
Vincent, R; Poirot, P; Subra, I; Rieger, B; Cicolella, A
1994-01-01
The exposure of workers to methylene chloride and phenol in an aeronautical workshop was measured during stripping of paint from a Boeing B 747. Methylene chloride exposure was measured during two work days by personal air sampling, while area sampling was used for phenol. During paint stripping operations, methylene chloride air concentrations ranged from 299.2 mg/m3 (83.1 ppm) to 1888.9 mg/m3 (524.7 ppm). The exposures to methylene chloride calculated for an 8-h work day ranged from 86 mg/m3 (23.9 ppm) to 1239.5 mg/m3 (344.3 ppm). In another aeronautical workshop, exposure to organic solvents, especially ethylene glycol monoethylether acetate (EGEEA), was controlled during the painting of an Airbus A 320. The external exposure to solvents and EGEEA was measured by means of individual air sampling. The estimation of internal exposure to EGEEA was made by measuring its urinary metabolite, ethoxyacetic acid (EAA). Both measurements were made during the course of 3 days. The biological samples were taken pre- and post-shift. During painting operations, methyl ethyl ketone, ethyl acetate, n-butyl alcohol, methyl isobutyl ketone, toluene, n-butyl acetate, ethylbenzene, xylenes and EGEEA were detected in working atmospheres. For these solvents, air concentrations ranged from 0.1 ppm to 69.1 ppm. EGEEA concentrations ranged from 29.2 mg/m3 (5.4 ppm) to 150.1 mg/m3 (27.8 ppm). For biological samples, the average concentrations of EAA were 108.4 mg/g creatinine in pre-shift and 139.4 mg/g creatinine in post-shift samples. Despite the fact that workers wore protective respiratory equipment during paint spraying operations, EEA urinary concentrations are high and suggest that percutaneous uptake is the main route of exposure for EGEEA.(ABSTRACT TRUNCATED AT 250 WORDS)
Alternatives for Benzene in the Extraction of Bitumen Fume from Exposure Sample Media.
Sutter, Benjamin; Ravera, Christel; Hussard, Caroline; Langlois, Eddy
2016-01-01
Benzene is frequently used to extract collected bitumen fumes from personal sampler substrates. However, this solvent is particularly dangerous because of its carcinogenicity (group 1 of the International Agency for Research on Cancer classification). Therefore, to prevent the exposure of laboratory technicians to benzene during the fume extraction step from samplers, a compromise had to be found to identify a less toxic solvent with the same extraction capacity. To compare the extraction capacities of selected solvents, bitumen fumes were generated in the laboratory from three different batches of road surfacing bitumen collected on dedicated bitumen fume samplers. The samplers were then extracted by benzene and the solvents tested. Of 11 selected solvents less toxic than benzene and used in studies on bitumen and bitumen fume analyses, n-hexane and n-heptane were identified as alternatives to benzene. In particular, the results demonstrated that n-heptane was the best candidate solvent for benzene replacement, due to its extraction efficiency comparable to benzene for the three bitumen fumes tested and its low toxicity, which is highly compatible with benzene replacement. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.
Aromatic as well as aliphatic hydrocarbon solvent axonopathy.
Spencer, Peter S; Kim, Min Sun; Sabri, Mohammad I
2002-03-01
Superfund sites that contain mixtures of aromatic and aliphatic solvents represent an undefined health hazard. After prolonged exposure to relatively high levels of certain aliphatic solvents (e.g. n-hexane, 2-hexanone), humans and animals develop a dose-dependent neurodegeneration that occurs clinically as a symmetrical peripheral neuropathy. This is triggered by the action of 2,5-hexanedione (1,2-diacetylethane), a 1,4-diketone (gamma-diketone) metabolite that targets proteins required for the maintenance of neuronal (and testicular Sertoli cell) integrity. Certain aromatic solvents (1,2-diethylbenzene, 1,2,4-triethylbenzene) cause electrophysiological changes consistent with sensorimotor neuropathy in rodents, but the underlying mechanisms and pathogenesis are unclear. Our recent studies show that the o-diacetyl derivative and likely metabolite of 1,2-diethylbenzene, 1,2-diacetylbenzene, behaves as a neurotoxic (aromatic) gamma-diketone of high neurotoxic potency. Rats treated with 1,2-diacetylbenzene develop limb weakness associated with proximal, neurofilament-filled giant axonal swellings comparable to those seen in animals treated with the potent 3,4-dimethyl derivative of 2,5-hexanedione. The blue chromogen induced by treatment with 1,2-diacetylbenzene is under study as a possible urinary biomarker of exposure to aromatic solvents (e.g. 1,2-diethylbenzene, tetralin) with neurotoxic potential. Development and validation of sensitive new biomarkers, especially for non-cancer endpoints, will aid in assessing the health risk associated with exposure to hazardous substances at Superfund sites.
Stewart, P A; Lee, J S; Marano, D E; Spirtas, R; Forbes, C D; Blair, A
1991-01-01
Methods are presented that were used for assessing exposures in a cohort mortality study of 15,000 employees who held 150,000 jobs at an Air Force base from 1939 to 1982. Standardisation of the word order and spelling of the job titles identified 43,000 unique job title organisation combinations. Walkthrough surveys were conducted, long term employees were interviewed, and available industrial hygiene data were collected to evaluate historic exposures. Because of difficulties linking air monitoring data and use of specific chemicals to the departments identified in the work histories, position descriptions were used to identify the tasks in each job. From knowledge of the tasks and the chemicals used in those tasks the presence or absence of 23 chemicals or groups of chemicals were designated for each job organisation combination. Also, estimates of levels of exposure were made for trichloroethylene and for mixed solvents, a category comprising several solvents including trichloroethylene, Stoddard solvent, carbon tetrachloride, JP4 gasoline, freon, alcohols, 1,1,1-trichloroethane, acetone, toluene, methyl ethyl ketone, methylene chloride, o-dichlorobenzene, perchloroethylene, chloroform, styrene, and xylene. PMID:1878309
Glove permeation by semiconductor processing mixtures containing glycol-ether derivatives.
Zellers, E T; Ke, H Q; Smigiel, D; Sulewski, R; Patrash, S J; Han, M W; Zhang, G Z
1992-02-01
Results of permeation tests of several glove materials challenged with semiconductor processing formulations containing glycolether derivatives are described. Commercial glove samples of nitrile rubber (Edmont), natural rubber (Edmont and Baxter), butyl rubber (North), PVC Baxter), a natural rubber/neoprene/nitrile blend (Pioneer), and a natural rubber/neoprene blend (Playtex) were tested according to the ASTM F739-85 permeation test method (open-loop configuration). The liquid formulations examined included a positive photoresist thinner containing 2-ethoxyethyl acetate (2-EEA), n-butyl acetate, and xylene; a positive photoresist containing 2-EEA, n-butyl acetate, xylene, polymer resins, and photoactive compounds; a negative photoresist containing 2-methoxyethanol (2-ME), xylene, and cyclized poly(isoprene); and pure 2-methoxyethyl acetate (2-MEA), which is the solvent used in a commercial electron-beam resist. With the exception of the negative photoresist, butyl rubber provided the highest level of protection against the solvent mixtures tested, with no breakthrough observed after 4 hr of continuous exposure at 25 degrees C. Nitrile rubber provided the highest level of protection against the negative photoresist and reasonably good protection against initial exposure to the other solvent mixtures. Gloves consisting of natural rubber or natural rubber blends provided less protection against the mixtures than either nitrile or butyl rubber. For most of the glove samples, permeation of the glycol-ether derivatives contained in the mixtures was faster than that predicted from the permeation of the pure solvents. Increasing the exposure temperature from 25 to 37 degrees C did not significantly affect the performance of the butyl rubber glove. For the other gloves, however, exposures at 37 degrees C resulted in decreases in breakthrough times of 25-75% and increases in steady-state permeation rates of 80-457% relative to values obtained at 25 degrees C. Repeated exposure of nitrile rubber samples resulted in shorter breakthrough times for all mixture components. In fact, exposure for as little as one-half of the nominal breakthrough time followed by air drying overnight resulted in measurable quantities of one or more of the component solvents at the inner surface of the gloves at the beginning of the next exposure. This effect was not observed with the butyl rubber samples. With the exception of the negative photoresist, heating previously exposed nitrile rubber samples at 70 degrees C for 20 hr prior to retesting reduced or eliminated the effects of residual solvents, permitting reuse of the gloves. The use of thin PVC or natural rubber gloves adjacent to the nitrile gloves provided moderate increases in permeation resistance.(ABSTRACT TRUNCATED AT 400 WORDS)
MICROWAVES IN ORGANIC SYNTHESIS
The effect of microwaves, a non-ionizing radiation, on organic reactions is described both in polar solvents and under solvent-free conditions. The special applications are highlighted in the context of solventless organic synthesis which involve microwave (MW) exposure of neat r...
A case of an accidental exposure to a veterinary insecticide product formulation.
Sidhu, K S; Collisi, M B
1989-02-01
A veterinary technician while opening a package was accidentally exposed to a commercial canned product formulation containing insecticides and solvents. The patient was twice briefly treated and released as an outpatient from 2 different hospitals on the first and second day after the exposure. However, on the fourth day, as some of the symptoms (headache, nausea, vomiting, diarrhea, difficult breathing) persisted, the patient was admitted to another hospital. The patient was treated for exposure to organophosphates and solvents and was released after 13 days. The patient developed diabetes insipidus, a condition which lasted for approximately 1 year. The cause of the temporary development of diabetes insipidus is not understood. There is a need to prevent and minimize such accidental exposures in future.
Use of Vacuum Degreasing for Precision Cleaning
NASA Technical Reports Server (NTRS)
Fox, Eric; Edwards, Kevin; Mitchell, Mark; Boothe, Richard
2017-01-01
Increasingly strict environmental regulations and the consequent phase out of many effective cleaning solvents has necessitated the development of novel cleaning chemistries and technologies. Among these is vacuum degreasing, a fully enclosed process that eliminates fugitive solvent emissions, thereby reducing cost, environmental, and health related exposure impacts. The effectiveness of vacuum degreasing using modified alcohol for common aerospace contaminants is reported and compared to current and legacy solvents.
SOLVENT-FREE ACCELERATED ORGANIC SYNTHESES USING MICROWAVES
Abstract: A solvent-free approach for organic synthesis is described which involves microwave (MW) exposure of neat reactants (undiluted) either in presence of a catalyst or catalyzed by the surfaces of inexpensive and recyclable mineral supports such as alumina, silica, clay, or...
EXPEDITIOUS SOLVENT-FREE ORGANIC SYNTHESES USING MICROWAVE IRRADIATION
Microwave-expedited solvent-free synthetic processes involve the exposure of neat reactants to microwave (MW) irradiation in the presence of supported reagents or catalysts on mineral oxides. Recent developments are described and the salient features of these high yield protocol...
Miazek, Krystian; Kratky, Lukas; Sulc, Radek; Jirout, Tomas; Aguedo, Mario; Richel, Aurore; Goffin, Dorothee
2017-07-04
In this review, the effect of organic solvents on microalgae cultures from molecular to industrial scale is presented. Traditional organic solvents and solvents of new generation-ionic liquids (ILs), are considered. Alterations in microalgal cell metabolism and synthesis of target products (pigments, proteins, lipids), as a result of exposure to organic solvents, are summarized. Applications of organic solvents as a carbon source for microalgal growth and production of target molecules are discussed. Possible implementation of various industrial effluents containing organic solvents into microalgal cultivation media, is evaluated. The effect of organic solvents on extraction of target compounds from microalgae is also considered. Techniques for lipid and carotenoid extraction from viable microalgal biomass (milking methods) and dead microalgal biomass (classical methods) are depicted. Moreover, the economic survey of lipid and carotenoid extraction from microalgae biomass, by means of different techniques and solvents, is conducted.
Miazek, Krystian; Sulc, Radek; Jirout, Tomas; Aguedo, Mario; Goffin, Dorothee
2017-01-01
In this review, the effect of organic solvents on microalgae cultures from molecular to industrial scale is presented. Traditional organic solvents and solvents of new generation-ionic liquids (ILs), are considered. Alterations in microalgal cell metabolism and synthesis of target products (pigments, proteins, lipids), as a result of exposure to organic solvents, are summarized. Applications of organic solvents as a carbon source for microalgal growth and production of target molecules are discussed. Possible implementation of various industrial effluents containing organic solvents into microalgal cultivation media, is evaluated. The effect of organic solvents on extraction of target compounds from microalgae is also considered. Techniques for lipid and carotenoid extraction from viable microalgal biomass (milking methods) and dead microalgal biomass (classical methods) are depicted. Moreover, the economic survey of lipid and carotenoid extraction from microalgae biomass, by means of different techniques and solvents, is conducted. PMID:28677659
Watkins, Marquita; Sizochenko, Natalia; Moore, Quentarius; Golebiowski, Marek; Leszczynska, Danuta; Leszczynski, Jerzy
2017-02-01
The presence of chlorophenols in drinking water can be hazardous to human health. Understanding the mechanisms of adsorption under specific experimental conditions would be beneficial when developing methods to remove toxic substances from drinking water during water treatment in order to limit human exposure to these contaminants. In this study, we investigated the sorption of chlorophenols on multi-walled carbon nanotubes using a density functional theory (DFT) approach. This was applied to study selected interactions between six solvents, five types of nanotubes, and six chlorophenols. Experimental data were used to construct structure-adsorption relationship (SAR) models that describe the recovery process. Specific interactions between solvents and chlorophenols were taken into account in the calculations by using novel specific mixture descriptors.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Althouse, L.P.; Hammon, H.G.
A ninety-day aging study was performed on Halthane 73-18A to determine the thermal aging effects due to the presence of DABCO, a catalyst. Samples were taken after 14 days, 30 days, 60 days, and 90 days of exposure to air at 90/sup 0/C. Tests used to evaluate aging effects were: ring tensile, differential scanning calorimetry, dynamic dielectric spectroscopy, and solvent swell. Results of tensile tests indicated an increase in tensile properties that peaked at 30 days and decayed to 70 percent loss of peak strength in 90 days. DSC, DDS, and solvent swell data all followed the same trend. Comparativemore » analysis of all data support the hypothesis that the presence of DABCO increases the oxidative cleavage of the polyether chain segment.« less
MALE REPRODUCTIVE EFFECTS OF SOLVENT AND FUEL EXPOSURE DURING AIRCRAFT MAINTENANCE
Few studies have addressed the effects of mixed, low level exposures to complex mixtures on a man's reproductive potential. In this prospective study, each subject was evaluated prior to first exposure and at 15 and 30 weeks after exposures had begun. A total of 50 men working ...
Leveraging Publically Available Chemical Functional Use Data in Support of Exposure Prediction
The U.S. EPA Exposure Forecasting (ExpoCast) project aims to provide rapid screening-level exposure predictions for thousands of chemicals, most of which lack detailed exposure data. Chemical functional use - the role a chemical plays in processes or products (e.g. solvent, ant...
Pesch, B; Haerting, J; Ranft, U; Klimpel, A; Oelschlägel, B; Schill, W
2000-12-01
This case-control study was conducted to estimate the renal cell cancer (RCC) risk for exposure to occupation-related agents, besides other suspected risk factors. In a population-based multicentre study, 935 incident RCC cases and 4298 controls matched for region, sex, and age were interviewed between 1991 and 1995 for their occupational history and lifestyle habits. Agent-specific exposure was expert-rated with two job-exposure matrices and a job task-exposure matrix. Conditional logistic regression was used to calculate smoking adjusted odds ratios (OR). Very long exposures in the chemical, rubber, and printing industries were associated with risk for RCC. Males considered as 'substantially exposed to organic solvents' showed a significant excess risk (OR = 1.6, 95% CI : 1.1-2.3). In females substantial exposure to solvents was also a significant risk factor (OR = 2.1, 95% CI : 1.0-4.4). Excess risks were shown for high exposure to cadmium (OR = 1.4, 95% CI : 1.1-1.8, in men, OR = 2.5, 95% CI : 1.2-5.3 in women), for substantial exposure to lead (OR = 1.5, 95% CI : 1.0-2.3, in men, OR = 2.6, 95% CI : 1.2-5.5, in women) and to solder fumes (OR = 1.5, 95% CI : 1.0-2.4, in men). In females, an excess risk for the task 'soldering, welding, milling' was found (OR = 3.0, 95% CI : 1.1-7.8). Exposure to paints, mineral oils, cutting fluids, benzene, polycyclic aromatic hydrocarbons, and asbestos showed an association with RCC development. Our results indicate that substantial exposure to metals and solvents may be nephrocarcinogenic. There is evidence for a gender-specific susceptibility of the kidneys.
Perbellini, L; Mozzo, P; Brugnone, F; Zedde, A
1986-01-01
The physiologicomathematical model with eight compartments described allows the simulation of the absorbtion, distribution, biotransformation, excretion of an organic solvent, and the kinetics of its metabolites. The usual compartments of the human organism (vessel rich group, muscle group, and fat group) are integrated with the lungs, the metabolising tissues, and three other compartments dealing with the metabolic kinetics (biotransformation, water, and urinary compartments). The findings obtained by mathematical simulation of exposure to n-hexane were compared with data previously reported. The concentrations of n-hexane in alveolar air and in venous blood described both in experimental and occupational exposures provided a substantial validation for the data obtained by mathematical simulation. The results of the urinary excretion of 2,5-hexanedione given by the model were in good agreement with data already reported. The simulation of an exposure to n-hexane repeated five days a week suggested that the solvent accumulates in the fat tissue. The half life of n-hexane in fat tissue equalled 64 hours. The kinetics of 2,5-hexanedione resulting from the model suggest that occupational exposure results in the presence of large amounts of 2,5-hexanedione in the body for the whole working week. PMID:3790456
Microwave-expedited solvent-free synthetic processes involve the exposure of neat reactants to microwave (MW) irradiation in the presence of supported reagents or catalysts on mineral oxides. Recent developments are described and the salient features of these high yield protocols...
Bjork, J; Albin, M; Welinder, H; Tinnerberg, H; Mauritzson, N; Kauppinen, T; Stromberg, U; Johansson, B; Billstrom, R; Mikoczy, Z; Ahlgren, T; Nilsson, P; Mitelman, F; Hagmar, L
2001-01-01
OBJECTIVES—To investigate a broad range of occupational, hobby, and lifestyle exposures, suggested as risk factors for Philadelphia chromosome positive (Ph+) chronic myeloid leukaemia (CML). METHODS—A case-control study, comprising 255 Ph+CML patients from southern Sweden and matched controls, was conducted. Individual data on work tasks, hobbies, and lifestyle exposures were obtained by telephone interviews. Occupational hygienists assessed occupational and hobby exposures for each subject individually. Also, occupational titles were obtained from national registries, and group level exposure—that is, the exposure proportion for each occupational title—was assessed with a job exposure matrix. The effects of 11 exposures using individual data and two exposures using group data (organic solvents and animal dust) were estimated. RESULTS—For the individual data on organic solvents, an effect was found for moderate or high intensity of exposure (odds ratio (OR) 3.4, 95% confidence interval (95% CI) 1.1 to 11) and for long duration (15-20 years) of exposure (OR 2.1, 95% CI 1.1 to 4.0). By contrast, the group data showed no association (OR 0.69, 95% CI 0.27 to 1.8; moderate or high intensity versus no exposure). For extremely low frequency electromagnetic fields (EMFs), only individual data were available. An association with long occupational exposure to EMFs was found (OR 2.3, 95% CI 1.2 to 4.5). However, no effect of EMF intensity was indicated. No significant effects of benzene, gasoline or diesel, or tobacco smoking were found. OR estimates below unity were suggested for personal use of hair dye and for agricultural exposures. CONCLUSIONS—Associations between exposure to organic solvents and EMFs, and Ph+CML were indicated but were not entirely consistent. Keywords: risk factors; epidemiology; case-control study PMID:11600728
DOE Office of Scientific and Technical Information (OSTI.GOV)
Xia, Xin R., E-mail: xia@ncsu.ed; Monteiro-Riviere, Nancy A.; Riviere, Jim E.
2010-01-01
Pristine fullerenes (C{sub 60}) in different solvents will be used in many industrial and pharmaceutical manufacturing and derivatizing processes. This report explores the impact of solvents on skin penetration of C{sub 60} from different types of industrial solvents (toluene, cyclohexane, chloroform and mineral oil). Yorkshire weanling pigs (n = 3) were topically dosed with 500 muL of 200 mug/mL C{sub 60} in a given solvent for 24 h and re-dosed daily for 4 days to simulate the worst scenario in occupational exposures. The dose sites were tape-stripped and skin biopsies were taken after 26 tape-strips for quantitative analysis. When dosedmore » in toluene, cyclohexane or chloroform, pristine fullerenes penetrated deeply into the stratum corneum, the primary barrier of skin. More C{sub 60} was detected in the stratum corneum when dosed in chloroform compared to toluene or cyclohexane. Fullerenes were not detected in the skin when dosed in mineral oil. This is the first direct evidence of solvent effects on the skin penetration of pristine fullerenes. The penetration of C{sub 60} into the stratum corneum was verified using isolated stratum corneum in vitro; the solvent effects on the stratum corneum absorption of C{sub 60} were consistent with those observed in vivo. In vitro flow-through diffusion cell experiments were conducted in pig skin and fullerenes were not detected in the receptor solutions by 24 h. The limit of detection was 0.001 mug/mL of fullerenes in 2 mL of the receptor solutions.« less
Ligocka, D; Lison, D; Haufroid, V
2002-10-05
The aim of this work was to validate a sensitive method for quantitative analysis of 5-hydroxy-N-methylpyrrolidone (5-HNMP) in urine. This compound has been recommended as a marker for biological monitoring of N-methylpyrrolidone (NMP) exposure. Different solvents and alternative methods of extraction including liquid-liquid extraction (LLE) on Chem Elut and solid-phase extraction (SPE) on Oasis HLB columns were tested. The most efficient extraction of 5-HNMP in urine was LLE with Chem Elut columns and dichloromethane as a solvent (consistently 22% of recovery). The urinary extracts were derivatized by bis(trimethylsilyl)trifluoroacetamide and analysed by gas chromatography-mass spectrometry (GC-MS) with tetradeutered 5-HNMP as an internal standard. The detection limit of this method is 0.017 mg/l urine with an intraassay precision of 1.6-2.6%. The proposed method of extraction is simple and reproducible. Four different m/z signal ratios of TMS-5-HNMP and tetralabelled TMS-5-HNMP have been validated and could be indifferently used in case of unexpected impurities from urine matrix. Copyright 2002 Elsevier Science B.V.
Díaz-Santana, Oscar; Vega-Moreno, Daura; Conde-Hardisson, Francisco
2017-09-15
An extraction and determination method is shown for the analysis of dyes and solvents present in two types of ballpoint pen inks that are deposited onto paper. Ink extracts are analysed using a combination of gas chromatography with mass spectrometry (GC-MS), and high-pressure liquid chromatography with photodiode array detection (HPLC-DAD), within a single sample extraction procedure. Seventeen solvents and thirteen dyes contained in two Montblanc ® inks (black and blue) were monitored for 45 months at monthly intervals, in order to determine variations in the concentrations of the compounds over time. We also studied the relative variations between different compounds and the generation of degradation products such as phenol. The concentration data obtained from these compounds during their exposure have been analysed and a multiple regression model is developed for each ink type that allows an estimate of the exposure time of the ink on paper with a maximum error of between 4 and 7 months. Copyright © 2017 Elsevier B.V. All rights reserved.
WORK SITE CLINICAL AND NEUROBEHAVIORAL ASSESSMENT OF SOLVENT EXPOSED MICROELECTRONICS WORKERS
A group of 25 workers currently (5), or formerly (20), involved in the manufacture of hybrid microcircuits underwent clinical evaluations at the request of a management-union committee concerned about chronic solvent exposures in a research and development laboratory. attery of n...
ORGANIC SYNTHESES IN SOLVENT-FREE AND AQUEOUS MEDIA USING MICROWAVES
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of recyclable mineral supports such as alumina, silica, clay, or 'doped' surfaces is presented which is applicable to a wide range of cleavage, condensation, cycl...
Solvent treatment of coal for improved liquefaction
Appell, Herbert R.; Narain, Nand K.; Utz, Bruce R.
1986-05-06
Increased liquefaction yield is obtained by pretreating a slurry of solid carbonaceous material and a liquid hydrocarbonaceous solvent at a temperature above 200.degree. C. but below 350.degree. C. for a period of 10 minutes to four hours prior to exposure to liquefaction temperatures.
Schliemann, Sibylle; Schmidt, Christina; Elsner, Peter
2014-01-01
The objective of our study was to investigate the tandem irritation potential of two organic solvents with concurrent exposure to the hydrophilic detergent irritant sodium lauryl sulphate (SLS). A tandem repeated irritation test was performed with two undiluted organic solvents, cumene (C) and octane (O), with either alternating application with SLS 0.5% or twice daily application of each irritant alone in 27 volunteers on the skin of the back. The cumulative irritation induced over 4 days was quantified using visual scoring and non-invasive bioengineering measurements (skin colour reflectance, skin hydration and transepidermal water loss). Repeated application of C/SLS and O/SLS induced more decline of stratum corneum hydration and higher degrees of clinical irritation and erythema compared to each irritant alone. Our results demonstrate a further example of additive harmful skin effects induced by particular skin irritants and indicate that exposure to organic solvents together with detergents may increase the risk of acquiring occupational contact dermatitis. © 2014 S. Karger AG, Basel.
Citizen scientist lepidopterists exposed to potential carcinogens.
Vainio, Petri J; Vahlberg, Tero; Liesivuori, Jyrki
2016-05-01
Lepidopterists use substantial volumes of solvents, such as chloroform, 1,1,2,2-tetrachloroethane and xylene, in their traps when collecting faunistic and phenological data. A majority of them are citizen scientists and thus in part not identified by occupational healthcare as being at risk due to solvent handling. We surveyed the extent of solvent use, the frequency and extent of potential exposure and the safety precautions taken in trapping and catch handling by Finnish lepidopterists. Chloroform and 1,1,2,2-tetrachloroethane were the most frequently used anaesthetics. Potential for exposure prevailed during trap maintenance and exploration and catch sorting. Adequate protection against vapours or spills was worn by 17% during trap exploration. Subjects completed a median of 100 trap explorations per season. Dermal or mucosal spills were recorded at a median rate of one spill per ten (chloroform) to 20 (1,1,2,2-tetrachloroethane and xylene) trap explorations. Median annual cumulative durations of 8 and 20 h of exposure to chloroform and 1,1,2,2-tetrachloroethane at levels above odour detection threshold were reported. Subjective adverse findings possibly related solvents had been noticed by 24 (9.8%) lepidopterists. All the events had been mild to moderate. No factor predicting unsafe procedures or adverse reactions was recorded despite thorough statistical testing. Copyright © 2016 Elsevier Ltd. All rights reserved.
Lee, Eun-Hee; Paek, Domyung; Kho, Young Lim; Choi, Kyungho; Chae, Hong Jae
2013-01-01
We evaluated color vision impairment in workers exposed to organic solvents, especially xylene. Three groups of subjects, comprising 63 workers occupationally exposed to organic solvents, 122 non-exposed workers in the same industry, and 185 subjects from the general population as controls, were evaluated for color vision. Exposure to solvents was indirectly evaluated by measuring the concentration of a urinary metabolite. Color vision was assessed using the Lanthony Desaturated 15-hue (Lanthony D-15) panel. Color confusion index (CCI) values in the exposed group were significantly higher than in the non-exposed workers or the general population, after adjustment for age and education, and significantly correlated with the concentration of methylhippuric acid. Color vision impairments were detected more frequently among the exposed group, and the most common types were type III and complex impairments. The rate of type III impairments was 9.52% in the exposed group, 1.64% in the non-exposed group, and 1.62% in the general population. Our results support the hypothesis that acquired color vision impairments could be induced by exposure to xylene. Testing for color vision impairment is a relatively simple, non-invasive and sensitive diagnostic method for relatively low-level exposures to xylene. Copyright © 2013 Elsevier Inc. All rights reserved.
Noise and neurotoxic chemical exposure relationship to workplace traumatic injuries: A review☆
Estill, Cheryl Fairfield; Rice, Carol H.; Morata, Thais; Bhattacharya, Amit
2017-01-01
Introduction More than 5,000 fatalities and eight million injuries occurred in the workplace in 2007 at a cost of $6 billion and $186 billion, respectively. Neurotoxic chemicals are known to affect central nervous system functions among workers, which include balance and hearing disorders. However, it is not known if there is an association between exposure to noise and solvents and acute injuries. Method A thorough review was conducted of the literature on the relationship between noise or solvent exposures and hearing loss with various health outcomes. Results The search resulted in 41 studies. Health outcomes included: hearing loss, workplace injuries, absence from work due to sickness, fatalities, hospital admissions due to workplace accidents, traffic accidents, hypertension, balance, slip, trips, or falls, cognitive measures, or disability retirement. Important covariates in these studies were age of employee, type of industry or occupation, or length of employment. Discussion Most authors that evaluated noise exposure concluded that higher exposure to noise resulted in more of the chosen health effect but the relationship is not well understood. Studies that evaluated hearing loss found that hearing loss was related to occupational injury, disability retirement, or traffic accidents. Studies that assessed both noise exposure and hearing loss as risk factors for occupational injuries reported that hearing loss was related to occupational injuries as much or more than noise exposure. Evidence suggests that solvent exposure is likely to be related to accidents or other health consequences such balance disorders. Conclusions Many authors reported that noise exposures and hearing loss, respectively, are likely to be related to occupational accidents. Practical applications The potential significance of the study is that findings could be used by managers to reduce injuries and the costs associated with those injures. PMID:28160812
Noise and neurotoxic chemical exposure relationship to workplace traumatic injuries: A review.
Estill, Cheryl Fairfield; Rice, Carol H; Morata, Thais; Bhattacharya, Amit
2017-02-01
More than 5,000 fatalities and eight million injuries occurred in the workplace in 2007 at a cost of $6 billion and $186 billion, respectively. Neurotoxic chemicals are known to affect central nervous system functions among workers, which include balance and hearing disorders. However, it is not known if there is an association between exposure to noise and solvents and acute injuries. A thorough review was conducted of the literature on the relationship between noise or solvent exposures and hearing loss with various health outcomes. The search resulted in 41 studies. Health outcomes included: hearing loss, workplace injuries, absence from work due to sickness, fatalities, hospital admissions due to workplace accidents, traffic accidents, hypertension, balance, slip, trips, or falls, cognitive measures, or disability retirement. Important covariates in these studies were age of employee, type of industry or occupation, or length of employment. Most authors that evaluated noise exposure concluded that higher exposure to noise resulted in more of the chosen health effect but the relationship is not well understood. Studies that evaluated hearing loss found that hearing loss was related to occupational injury, disability retirement, or traffic accidents. Studies that assessed both noise exposure and hearing loss as risk factors for occupational injuries reported that hearing loss was related to occupational injuries as much or more than noise exposure. Evidence suggests that solvent exposure is likely to be related to accidents or other health consequences such balance disorders. Many authors reported that noise exposures and hearing loss, respectively, are likely to be related to occupational accidents. Practical applications: The potential significance of the study is that findings could be used by managers to reduce injuries and the costs associated with those injures. Published by Elsevier Ltd.
Childhood leukemia and parents' occupational and home exposures.
Lowengart, R A; Peters, J M; Cicioni, C; Buckley, J; Bernstein, L; Preston-Martin, S; Rappaport, E
1987-07-01
A case-control study of children of ages 10 years and under in Los Angeles County was conducted to investigate the causes of leukemia. The mothers and fathers of acute leukemia cases and their individually matched controls were interviewed regarding specific occupational and home exposures as well as other potential risk factors associated with leukemia. Analysis of the information from the 123 matched pairs showed an increased risk of leukemia for children whose fathers had occupational exposure after the birth of the child to chlorinated solvents [odds ratio (OR) = 3.5, P = .01], spray paint (OR = 2.0, P = .02), dyes or pigments (OR = 4.5, P = .03), methyl ethyl ketone (CAS: 78-93-3; OR = 3.0, P = .05), and cutting oil (OR = 1.7, P = .05) or whose fathers were exposed during the mother's pregnancy with the child to spray paint (OR = 2.2, P = .03). For all of these, the risk associated with frequent use was greater than for infrequent use. There was an increased risk of leukemia for the child if the father worked in industries manufacturing transportation equipment (mostly aircraft) (OR = 2.5, P = .03) or machinery (OR = 3.0, P = .02). An increased risk was found for children whose parents used pesticides in the home (OR = 3.8, P = .004) or garden (OR = 6.5, P = .007) or who burned incense in the home (OR = 2.7, P = .007). The risk was greater for frequent use. Risk of leukemia was related to mothers' employment in personal service industries (OR = 2.7, P = .04) but not to specified occupational exposures. Risk related to fathers' exposure to chlorinated solvents, employment in the transportation equipment-manufacturing industry, and parents' exposure to household or garden pesticides and incense remains statistically significant after adjusting for the other significant findings.
Dharmarajan, Venkatram; Cummings, Barbara; Lingg, Robert D
2003-08-01
Toluene diisocyanate (TDI) is a widely used raw material in the manufacture of flexible polyurethane foams. Acetone (ACE) and/or methylenechloride (MECL) solvents are the most commonly used solvent-based blowing agents for TDI foams. ACGIH has recommended a TWA exposure limit of 5 ppb for TDI and 500 ppm for ACE. For MECL, OSHA mandates a TWA-exposure limit of 25 ppm. This study evaluated the ability of the organic-vapor respirator cartridges (OVC) to block TDI, as well as the effect of airborne MECL or ACE on the OVCs' efficiency to capture TDI. An aluminum/stainless steel exposure chamber was constructed for simultaneously challenging OVCs in triplicate with a dynamic atmosphere of TDI and ACE or MECL vapor. The challenge atmosphere was generated by combining a TDI-laden nitrogen stream from the headspace of a heated impinger with a humidified stream of the indicated solvent in air. The average challenge concentration for TDI was 275 ppb. The average MECL or ACE concentrations were 547 and 581 ppm, respectively. The challenge atmosphere at room temperature (approximately 24 degrees C) and at 25 or 80 percent relative humidity was drawn through each cartridge at 32 L/min for 40+ hours. During the last 8 hours of the challenge, the atmosphere had only TDI vapor. The pre- and post-cartridge atmospheres were periodically sampled for TDI and solvent. Five tests were conducted--two with MSA and three with North OVCs. Under these extreme test conditions no TDI breakthrough was detected from any OVC. The average-calculated efficiency of the OVCs for TDI was >99.9+ percent. Within the first 6 hours of the challenge the cartridges were saturated with ACE or MECL; nevertheless, continued challenging with TDI and solvents did not cause any TDI breakthrough. The study demonstrates that with an OSHA-compliant respiratory protection program, an OVC can safely be used for 40 hours in most polyurethane foam operations. In typical occupational environments using TDI and solvents, the solvent breakthrough, rather than TDI breakthrough, would be the determining factor for the calculation of respirator cartridge change-out schedules.
'GREENER' CHEMICAL SYNTHESES USING MICROWAVES UNDER SOLVENT-FREE CONDITIONS OR AQUEOUS MEDIA
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of recyclable mineral supports such as alumina, silica, clay, or 'doped' surfaces is presented which is applicable to a wide range of cleavage, condensation, cycl...
Chiò, Adriano; Herrero Hernandez, Elena; Mora, Gabriele; Valentini, Consuelo; Discalzi, Gianluigi; Pira, Enrico
2004-09-01
A 34-years-old floor-layer developed optic neuropathy and motor neuron disease after being accidentally exposed to a solvent mixture containing methanol and other substances. Optic neuropathy is a complication of methanol poisoning, but the onset of a motor neuron disorder resembling amyotrophic lateral sclerosis after the exposure to these substances has not been previously described. The temporal onset of the clinical symptoms, biological plausibility, young age of the patient and absence of neurological disorders in the family history raises suspicion of a possible causative relationship.
[Evaluation of exposure of auto painters to organic solvents in the city of Bogota].
Palma, Marien; Briceño, Leonardo; Idrovo, Álvaro J; Varona, Marcela
2015-08-01
Painters of automobiles are exposed to pure and mixed solvents that have been associated with neurological effects and carcinogenic mutations. To characterize the health and work conditions of individuals who are occupationally exposed to organic solvents used in sheet metal and auto body shops in Bogota. Descriptive, cross-sectional study that characterizes the health and work conditions of individuals exposed to organic solvents in sheet metal and auto body shops in Bogota. A group exposed to the solvents was compared to an unexposed group. Air concentrations of benzene, toluene and xylene (BTX) were determined, individual questionnaires were administered and phenylmercapturic, hippuric and ortho- and para-methylhippuric acids were measured in urine. The results of the measurements and the questionnaires were correlated to determine the exposure panorama. For the three BTX metabolites, statistically significant differences (p<0.001) were found between the population exposed to the solvents and the unexposed population. For the exposed population, positive correlations were found between toluene in air and hippuric acid in urine (rho=0.82) and between xylene in air and o-methylhippuric acid in urine (rho=0.76). Hippuric acid values exceeded permissible levels in 11 workers and p-methylhippuric acid exceeded permissible levels in 8 workers. None of the phenylmercapturic values exceeded the limit. Auto painters are exposed to high levels of organic solvents at the workplace and do not have adequate industrial health and safety conditions to perform their jobs.
Chronic Organic Solvent Exposure Changes Visual Tracking in Men and Women.
de Oliveira, Ana R; Campos Neto, Armindo de Arruda; Bezerra de Medeiros, Paloma C; de Andrade, Michael J O; Dos Santos, Natanael A
2017-01-01
Organic solvents can change CNS sensory and motor function. Eye-movement analyses can be important tools when investigating the neurotoxic changes that result from chronic organic solvent exposure. The current research measured the eye-movement patterns of men and women with and without histories of chronic organic solvent exposure. A total of 44 volunteers between 18 and 41 years old participated in this study; 22 were men (11 exposed and 11 controls), and 22 were women (11 exposed and 11 controls). Eye movement was evaluated using a 250-Hz High-Speed Video Eye Tracker Toolbox (Cambridge Research Systems) via an image of a maze. Specific body indices of exposed and non-exposed men and women were measured with an Inbody 720 to determine whether the differences in eye-movement patterns were associated with body composition. The data were analyzed using IBM SPSS Statistics version 20.0.0. The results indicated that exposed adults showed significantly more fixations ( t = 3.82; p = 0.001; r = 0.51) and longer fixations ( t = 4.27; p = 0.001, r = 0.54) than their non-exposed counterparts. Comparisons within men (e.g., exposed and non-exposed) showed significant differences in the number of fixations ( t = 2.21; p = 0.04; r = 0.20) and duration of fixations ( t = 3.29; p = 0.001; r = 0.35). The same was true for exposed vs. non-exposed women, who showed significant differences in the number of fixations ( t = 3.10; p = 0.001; r = 0.32) and fixation durations ( t = 2.76; p = 0.01; r = 0.28). However, the results did not show significant differences between exposed women and men in the number and duration of fixations. No correlations were found between eye-movement pattern and body composition measures ( p > 0.05). These results suggest that chronic organic solvent exposure affects eye movements, regardless of sex and body composition, and that eye tracking contributes to the investigation of the visual information processing disorders acquired by workers exposed to organic solvents.
Uzma, Nazia; Salar, B M Khaja Mohinuddin; Kumar, B Santhosh; Aziz, Nusrat; David, M Anthony; Reddy, V Devender
2008-09-01
Long term exposure to solvents and air pollutants can lead to deleterious effects on respiratory, haematological and thyroid functioning. The aim of this study was to investigate whether chronic exposure to solvents like benzene and pollutants like carbon monoxide in petrol filling workers had adverse effect on blood parameters, thyroid and respiratory functions. The study group consisted of 42 healthy, non-smoker petrol filling workers, aged 20-50 years with work (exposure) duration from 2-15 years while 36 healthy subjects of the same age group served as controls. Physical examination and measurement of pulmonary functions by portable electronic spirometer were performed. Complete blood pictures (CBP) were determined by normal haematology lab procedure and hormones by Chemiluminescence immunoassay (CLIA) light absorption techniques. There was a significant decrease in the lung volumes and capacities; the restrictive pattern was more prevalent in the workers when compared with the control groups. But in the workers exposed for long period (more than 10 years) the restrictive pattern was changed to mixed pattern. A significant increase in haemoglobin (Hb) (>16 mg %) and red blood cells (RBC) (5.4 million cells/mm3) were observed in workers with longer period of exposure when compared with the control subjects (14.483 mg% and 4.83 million cells/mm3 for Hb and RBC respectively). White blood cell count except eosinophils and platelets were significantly lower in workers compared to controls. Marked increase in the tetra iodothyroinine (T4), free thyroxine (T4F) level and significant decrease in thyroid stimulating hormones (TSH), and tri-iodothyronine (T3) were observed between long term exposed and non-exposed groups. Till now researchers focused only on the effect of solvents in workers professionally exposed to solvents without considering the effect of concomittant air pollution. The result obtained from present study indicates that there is a significant toxic effect of solvents and air pollutants on workers exposed for longer duration. Improved detection and prevention technologies are needed to answer environmentally related health questions for petrol filling workers.
Time-Course of the Ethanol-like Discriminative Stimulus Effects of Abused Inhalants in Mice
Bowen, Scott E.
2009-01-01
Abused solvents have effects similar to those of abused depressant drugs. This experiment evaluated the time course of the discriminative stimulus effects of toluene and 1,1,1-trichloroethane (TRI). Mice were trained to discriminate between i.p. injections of ethanol (EtOH;1.25 g/kg) and saline in a two-lever operant task in which responding was under the control of a fixed-ratio 20 schedule. After 20-min inhalation exposures to toluene (500–6000 ppm) or TRI (1,000–12,000 ppm), stimulus generalization was examined at 0, 5, 10, 20, and 40 min post-exposure. Ethanol doses ≥ 0.25 g/kg produced increases in EtOH-lever responding with full substitution occurring immediately after testing for doses between 1.25 and 2.5 g/kg. Toluene and TRI produced increased EtOH-lever responding at 0–10 min post exposure with some EtOH-lever responding occurring up to 20-min post exposure. Response rates were not decreased for any concentration of toluene or TRI immediately following inhalant exposure but several concentrations elevated rates from 5–40 min post exposure. These results confirm and extend previous studies and show these solvents produce similar effects in EtOH-lever responding but with potency differences. The time-dependent differences in EtOH-lever responding suggest that as solvents are cleared from the body, the EtOH-like subjective effects also fade. PMID:18722399
EXPOSURE-DOSE-RESPONSE MODELING OF THE NEUROTOXIC EFFECTS OF ORGANIC SOLVENTS.
Risk assessments based on exposure to volatile organic compounds (VOCs) are hampered by the complexities of exposure scenarios, a lack of data regarding the mode of action of the VOCs, and uncertainties about extrapolating from animal data to human health risk. We are developing ...
Kanavouras, Konstantinos; Tzatzarakis, Manolis N; Mastorodemos, Vasileios; Plaitakis, Andreas; Tsatsakis, Aristidis M
2011-11-01
Motor neuron disease is a devastating neurodegenerative condition, with the majority of sporadic, non-familial cases being of unknown etiology. Several epidemiological studies have suggested that occupational exposure to chemicals may be associated with disease pathogenesis. We report the case of a patient developing progressive motor neuron disease, who was chronically exposed to pesticides and organic solvents. The patient presented with leg spasticity and developed gradually clinical signs suggestive of amyotrophic lateral sclerosis, which was supported by the neurophysiologic and radiological findings. Our report is an evidence based case of combined exposure to organochlorine (DDTs), organophosphate pesticides (OPs) and organic solvents as confirmed by laboratory analysis in samples of blood and hair confirming systematic exposure. The concentration of non-specific dialkylphosphates metabolites (DAPs) of OPs in hair (dimethyphopshate (DMP) 1289.4 pg/mg and diethylphosphate (DEP) 709.4 pg/mg) and of DDTs (opDDE 484.0 pg/mg, ppDDE 526.6 pg/mg, opDDD 448.4 pg/mg, ppDDD+opDDT 259.9 pg/mg and ppDDT 573.7 pg/mg) were considerably significant. Toluene and n-hexane were also detected in blood on admission at hospital and quantified (1.23 and 0.87 μg/l, respectively), while 3 months after hospitalization blood testing was found negative for toluene and n-hexane and hair analysis was provided decrease levels of HCHs, DDTs and DAPs. Copyright © 2011 Elsevier Inc. All rights reserved.
Brandt, Simon D; Martins, Cláudia P B; Freeman, Sally; Dempster, Nicola; Riby, Philip G; Gartz, Jochen; Alder, John F
2008-07-04
The psychoactive properties of N,N-dimethyltryptamine (DMT) 1a are known to induce altered states of consciousness in humans. This particular attribute attracts great interest from a variety of scientific and also clandestine communities. Our recent research has confirmed that DMT reacts with dichloromethane (DCM), either as a result of work-up or storage to give a quaternary N-chloromethyl ammonium salt 2a. Furthermore, this was observed to undergo rearrangement during analysis using gas chromatography-mass spectrometry (GC-MS) with products including 3-(2-chloroethyl)indole 3 and 2-methyltetrahydro-beta-carboline 4 (2-Me-THBC). This study further investigates this so far unexplored area of solvent interactions by the exposure of DMT to other halogenated solvents including dibromomethane and 1,2-dichloroethane (DCE). The N-bromomethyl- and N-chloroethyl quaternary ammonium derivatives were subsequently characterised by ion trap GC-MS in electron and chemical ionisation tandem MS mode and by NMR spectroscopy. The DCE-derived derivative formed at least six rearrangement products in the total ion chromatogram. Identification of mass spectrometry generated by-products was verified by conventional or microwave-accelerated synthesis. The use of deuterated DCM and deuterated DMT 1b provided insights into the mechanism of the rearrangements. The presence of potentially characteristic marker molecules may allow the identification of solvents used during the manufacture of controlled substances, which is often neglected since these are considered inert.
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of recyclable mineral supports such as alumina, silica, clay, or 'doped' surfaces is presented which is applicable to a wide range of cleavage, condensation, cycl...
Method of preparation of removable syntactic foam
Arnold, C. Jr.; Derzon, D.K.; Nelson, J.S.; Rand, P.B.
1995-07-11
Easily removable, environmentally safe, low-density, syntactic foams are disclosed which are prepared by mixing insoluble microballoons with a solution of water and/or alcohol-soluble polymer to produce a pourable slurry, optionally vacuum filtering the slurry in varying degrees to remove unwanted solvent and solute polymer, and drying to remove residual solvent. The properties of the foams can be controlled by the concentration and physical properties of the polymer, and by the size and properties of the microballoons. The suggested solute polymers are non-toxic and soluble in environmentally safe solvents such as water or low-molecular weight alcohols. The syntactic foams produced by this process are particularly useful in those applications where ease of removability is beneficial, and could find use in packaging recoverable electronic components, in drilling and mining applications, in building trades, in art works, in the entertainment industry for special effects, in manufacturing as temporary fixtures, in agriculture as temporary supports and containers and for delivery of fertilizer, in medicine as casts and splints, as temporary thermal barriers, as temporary protective covers for fragile objects, as filters for particulate matter, which matter may be easily recovered upon exposure to a solvent, as in-situ valves (for one-time use) which go from maximum to minimum impedance when solvent flows through, and for the automatic opening or closing of spring-loaded, mechanical switches upon exposure to a solvent, among other applications. 1 fig.
Method of preparation of removable syntactic foam
Arnold, Jr., Charles; Derzon, Dora K.; Nelson, Jill S.; Rand, Peter B.
1995-01-01
Easily removable, environmentally safe, low-density, syntactic foams are disclosed which are prepared by mixing insoluble microballoons with a solution of water and/or alcohol-soluble polymer to produce a pourable slurry, optionally vacuum filtering the slurry in varying degrees to remove unwanted solvent and solute polymer, and drying to remove residual solvent. The properties of the foams can be controlled by the concentration and physical properties of the polymer, and by the size and properties of the microballoons. The suggested solute polymers are non-toxic and soluble in environmentally safe solvents such as water or low-molecular weight alcohols. The syntactic foams produced by this process are particularly useful in those applications where ease of removability is beneficial, and could find use in packaging recoverable electronic components, in drilling and mining applications, in building trades, in art works, in the entertainment industry for special effects, in manufacturing as temporary fixtures, in agriculture as temporary supports and containers and for delivery of fertilizer, in medicine as casts and splints, as temporary thermal barriers, as temporary protective covers for fragile objects, as filters for particulate matter, which matter may be easily recovered upon exposure to a solvent, as in-situ valves (for one-time use) which go from maximum to minimum impedance when solvent flows through, and for the automatic opening or closing of spring-loaded, mechanical switches upon exposure to a solvent, among other applications.
Potentiation of Chemical Ototoxicity by Noise
Steyger, Peter S.
2010-01-01
High-intensity and/or prolonged exposure to noise causes temporary or permanent threshold shifts in auditory perception. Occupational exposure to solvents or administration of clinically important drugs, such as aminoglycoside antibiotics and cisplatin, also can induce permanent hearing loss. The mechanisms by which these ototoxic insults cause auditory dysfunction are still being unraveled, yet they share common sequelae, particularly generation of reactive oxygen species, that ultimately lead to hearing loss and deafness. Individuals are frequently exposed to ototoxic chemical contaminants (e.g., fuel) and noise simultaneously in a variety of work and recreational environments. Does simultaneous exposure to chemical ototoxins and noise potentiate auditory dysfunction? Exposure to solvent vapor in noisy environments potentiates the permanent threshold shifts induced by noise alone. Moderate noise levels potentiate both aminoglycoside- and cisplatin-induced ototoxicity in both rate of onset and in severity of auditory dysfunction. Thus, simultaneous exposure to chemical ototoxins and moderate levels of noise can potentiate auditory dysfunction. Preventing the ototoxic synergy of noise and chemical ototoxins requires removing exposure to ototoxins and/or attenuating noise exposure levels when chemical ototoxins are present. PMID:20523755
Issues Related to Cleaning Complex Geometry Surfaces with ODC-Free Solvents
NASA Technical Reports Server (NTRS)
Bradford, Blake F.; Wurth, Laura A.; Nayate, Pramod D.; McCool, Alex (Technical Monitor)
2001-01-01
Implementing ozone depleting chemicals (ODC)-free solvents into full-scale reusable solid rocket motor cleaning operations has presented problems due to the low vapor pressures of the solvents. Because of slow evaporation, solvent retention is a problem on porous substrates or on surfaces with irregular geometry, such as threaded boltholes, leak check ports, and nozzle backfill joints. The new solvents are being evaluated to replace 1,1,1-trichloroethane, which readily evaporates from these surfaces. Selection of the solvents to be evaluated on full-scale hardware was made based on results of subscale tests performed with flat surface coupons, which did not manifest the problem. Test efforts have been undertaken to address concerns with the slow-evaporating solvents. These concerns include effects on materials due to long-term exposure to solvent, potential migration from bolthole threads to seal surfaces, and effects on bolt loading due to solvent retention in threads. Tests performed to date have verified that retained solvent does not affect materials or hardware performance. Process modifications have also been developed to assist drying, and these can be implemented if additional drying becomes necessary.
Occupational exposures and pancreatic cancer: a meta-analysis
Ojajarvi, I; Partanen, T.; Ahlbom, A.; Boffetta, P.; Hakulinen, T.; Jourenkova, N.; Kauppinen, T.; Kogevinas, M.; Porta, M.; Vainio, H.; Weiderpass, E.; Wesseling, C.
2000-01-01
OBJECTIVES—Consolidation of epidemiological data on pancreatic cancer and worksite exposures. METHODS—Publications during 1969-98 were surveyed. Studies without verified exposures were excluded. Meta-analyses were conducted on data from 92 studies covering 161 populations, with results for 23 agents or groups of agents. With a standard format, five epidemiologists extracted risk estimates and variables of the structure and quality of each study. The extracted data were centrally checked. Random meta-models were applied. RESULTS—Based on 20 populations, exposure to chlorinated hydrocarbon (CHC) solvents and related compounds was associated with a meta-risk ratio (MRR) of 1.4 (95% confidence interval (95% CI) 1.0 to 1.8). Nickel and nickel compounds were considered in four populations (1.9; 1.2 to 3.2). Excesses were found also for chromium and chromium compounds (1.4; 0.9 to 2.3), polycyclic aromatic hydrocarbons (PAHs) (1.5; 0.9 to 2.5), organochlorine insecticides (1.5; 0.6 to 3.7), silica dust (1.4; 0.9 to 2.0), and aliphatic and alicyclic hydrocarbon solvents (1.3; 0.8 to 2.8). Evidence on pancreatic carcinogenicity was weak or non-positive for the following agents: acrylonitrile (1.1; 0.0 to 6.2); arsenic (1.0; 0.6 to 1.5); asbestos (1.1; 0.9 to 1.5); diesel engine exhaust (1.0; 0.9 to 1.3); electromagnetic fields (1.1; 0.8 to 1.4); formaldehyde (0.8; 0.5 to 1.0); flour dust (1.1; 0.3 to 3.2); cadmium and cadmium compounds (0.7; 0.4 to 1.4); gasoline (1.0; 0.8 to 1.2); herbicides (1.0; 0.8 to 1.3); iron and iron compounds (1.3; 0.7 to 2.5); lead and lead compounds (1.1; 0.8 to 1.5); man-made vitreous fibres (1.0; 0.6 to 1.6); oil mist (0.9; 0.8 to 1.0); and wood dust (1.1; 0.9 to 2.5). The occupational aetiological fraction of pancreatic cancer was estimated at 12%. In a subpopulation exposed to CHC solvents and related compounds, it was 29%; to chromium and chromium compounds, 23%; to nickel and nickel compounds, 47%; to insecticides, 33%; and to PAHs, 33%. CONCLUSION—Occupational exposures may increase risk of pancreatic cancer. High quality studies are called for on interactions between occupational, environmental, and lifestyle factors as well as interactions between genes and the environment. Keywords: pancreatic cancer; occupational exposure; meta-analysis PMID:10769297
Parasuraman, Subramani; Sujithra, Jeyabalan; Syamittra, Balakrishnan; Yeng, Wong Yeng; Ping, Wu Yet; Muralidharan, Selvadurai; Raj, Palanimuthu Vasanth; Dhanaraj, Sokkalingam Arumugam
2014-01-01
Background: In general, organic solvents are inhibiting many physiological enzymes and alter the behavioural functions, but the available scientific knowledge on laboratory solvent induced organ specific toxins are very limited. Hence, the present study was planned to determine the sub-chronic toxic effects of petroleum ether (boiling point 40–60°C), a laboratory solvent in Sprague-Dawley (SD) rats. Materials and Methods: The SD rats were divided into three different groups viz., control, low exposure petroleum ether (250 mg/kg; i.p.) and high exposure petroleum ether (500 mg/kg; i.p.) administered group. The animals were exposed with petroleum ether once daily for 2 weeks. Prior to the experiment and end of the experiment animals behaviour, locomotor and memory levels were monitored. Before initiating the study animals were trained for 2 weeks for its learning process and its memory levels were evaluated. Body weight (BW) analysis, locomotor activity, anxiogenic effect (elevated plus maze) and learning and memory (Morris water navigation task) were monitored at regular intervals. On 14th day of the experiment, few ml of blood sample was collected from all the experimental animals for estimation of biochemical parameters. At the end of the experiment, all the animals were sacrificed, and brain, liver, heart, and kidney were collected for biochemical and histopathological analysis. Results: In rats, petroleum ether significantly altered the behavioural functions; reduced the locomotor activity, grip strength, learning and memory process; inhibited the regular body weight growth and caused anxiogenic effects. Dose-dependent organ specific toxicity with petroleum ether treated group was observed in brain, heart, lung, liver, and kidney. Extrapyramidal effects that include piloerection and cannibalism were also observed with petroleum ether administered group. These results suggested that the petroleum ether showed a significant decrease in central nervous system (CNS) activity, and it has dose-dependent toxicity on all vital organs. Conclusion: The dose-dependent CNS and organ specific toxicity was observed with sub-chronic administration of petroleum ether in SD rats. PMID:25316988
Jet Fuel, Noise, and the Central Auditory Nervous System: A Literature Review.
Warner, Rachelle; Fuente, Adrian; Hickson, Louise
2015-09-01
Prompted by the continued prevalence of hearing related disabilities accepted as eligible for compensation and treatment under Australian Department of Veterans' Affairs legislation, a review of recent literature regarding possible causation mechanisms and thus, possible prevention strategies, is timely. The emerging thoughts on the effects of a combination of jet fuel and noise exposure on the central auditory nervous system (CANS) have relevance in the military aviation context because of the high exposures to solvents (including fuels) and unique noise hazards related to weapons systems and military aircraft. This literature review aimed to identify and analyze the current knowledge base of the effects of combined exposure to JP-8 jet fuel (or its aromatic solvent components) and noise on the CANS in human populations. We reviewed articles examining electrophysiological and behavioral measurement of the CANS following combined exposures to jet fuel (or its aromatic constituents) and noise. A total of 6 articles met the inclusion criteria for the review and their results are summarized. The articles considered in this review indicate that assessment of the CANS should be undertaken as part of a comprehensive test battery for military members exposed to both noise and solvents in the workplace. Reprint & Copyright © 2015 Association of Military Surgeons of the U.S.
Shrivas, Kamlesh; Wu, Hui-Fen
2007-11-02
A simple and rapid sample cleanup and preconcentration method for the quantitative determination of caffeine in one drop of beverages and foods by gas chromatography/mass spectrometry (GC/MS) has been proposed using drop-to-drop solvent microextraction (DDSME). The best optimum experimental conditions for DDSME were: chloroform as the extraction solvent, 5 min extraction time, 0.5 microL exposure volume of the extraction phase and no salt addition at room temperature. The optimized methodology exhibited good linearity between 0.05 and 5.0 microg/mL with correlation coefficient of 0.980. The relative standard deviation (RSD) and limits of detection (LOD) of the DDSME/GC/MS method were 4.4% and 4.0 ng/mL, respectively. Relative recovery of caffeine in beverages and foods were found to be 96.6-101%, which showing good reliability of this method. This DDSME excludes the major disadvantages of conventional method of caffeine extraction, like large amount of organic solvent and sample consumption and long sample pre-treatment process. So, this approach proves that the DDSME/GC/MS technique can be applied as a simple, fast and feasible diagnosis tool for environmental, food and biological application for extremely small amount of real sample analysis.
[Myeloproliferative disorders due to the use of gasoline as a solvent: report of three cases].
Bernardini, P; Giannandrea, F; Voso, Maria Teresa; Sica, Simona
2005-01-01
Health effects of occupational exposure to benzene are currently a problem, despite the fact that preventive measures have been in existence in Italy for more than 40 years. To describe three recent cases of severe haematological disease presumably induced by an occupational exposure to benzene. Exposure occurred as a result of contact with ordinary automobile petrol used as a solvent-degreaser for metal parts. Clinical diagnosis was performed using standard immuno-phenotypic and morphological criteria; the hypothesis of an occupational origin was derived from analysis of the occupational histories. The first case was a 59 year-old blacksmith suffering from acute myeloid leukaemia (AML) FAB M2, who had used petrol for 36 years to degrease the forged metal parts before painting them. The second was a 53 year-old mechanic with AML FAB M3 who had used petrol for 15 years to degrease mechanical parts of tanker motors. The third was an 82 year-old car mechanic suffering from idiopathic myelofibrosis since the age of 75, who had used petrol to degrease mechanical car motor parts for 42 years. In all three cases, the environmental hygiene measures necessary to limit inhalation or skin contact were not followed and, at times, in the case of the two mechanics, the petrol was siphoned by mouth; so there was substantial exposure to the 1-5% benzene present in the petrol. Latency of the disease was between 30-50 years from start of exposure, and between 3-17 years following cessation of exposure. The cases described indicate that the myelotoxic effects of benzene are still a problem. They were the consequence of improper use of petrol, due to total misinformation of the risks involved in such use. It is not possible to ascertain whether the cases presented are a casual aggregation or if the use of petrol as a solvent is more common than is normally believed; in the latter case two questions must be asked: is a "normal" occupational history able to discover such an uncommon risky condition of exposure? If it cannot, how many cases of benzene-related diseases escape aetiological diagnosis? It is not possible to provide precise answers but efforts should be made to improve the quality of information about the risks of petrol. Furthermore, in all cases of haematological disease potentially related to benzene, any form of contact with petrol, even if uncommon, should be carefully researched.
The time course of exposure to p-nonylphenol (NP) from two different sources was compared to equivalent exposures of 17-b-estradiol (E2) and a solvent control (ethanol: EtOH). Japanese medaka were exposed for 4 days to a nominal concentration of 20 ?g/l of either NP-I (Schenectad...
Quarles, C Derrick; Randunu, K Manoj; Brumaghim, Julia L; Marcus, R Kenneth
2011-10-01
The analysis of metal-binding proteins requires careful sample manipulation to ensure that the metal-protein complex remains in its native state and the metal retention is preserved during sample preparation or analysis. Chemical analysis for the metal content in proteins typically involves some type of liquid chromatography/electrophoresis separation step coupled with an atomic (i.e., inductively coupled plasma-optical emission spectroscopy or -mass spectrometry) or molecular (i.e., electrospray ionization-mass spectrometry) analysis step that requires altered-solvent introduction techniques. UV-VIS absorbance is employed here to monitor the iron content in human holo-transferrin (Tf) under various solvent conditions, changing polarity, pH, ionic strength, and the ionic and hydrophobic environment of the protein. Iron loading percentages (i.e. 100% loading equates to 2 Fe(3+):1 Tf) were quantitatively determined to evaluate the effect of solvent composition on the retention of Fe(3+) in Tf. Maximum retention of Fe(3+) was found in buffered (20 mM Tris) solutions (96 ± 1%). Exposure to organic solvents and deionized H(2)O caused release of ~23-36% of the Fe(3+) from the binding pocket(s) at physiological pH (7.4). Salt concentrations similar to separation conditions used for ion exchange had little to no effect on Fe(3+) retention in holo-Tf. Unsurprisingly, changes in ionic strength caused by additions of guanidine HCl (0-10 M) to holo-Tf resulted in unfolding of the protein and loss of Fe(3+) from Tf; however, denaturing and metal loss was found not to be an instantaneous process for additions of 1-5 M guanidinium to Tf. In contrast, complete denaturing and loss of Fe(3+) was instantaneous with ≥6 M additions of guanidinium, and denaturing and loss of iron from Tf occurred in parallel proportions. Changes to the hydrophobicity of Tf (via addition of 0-14 M urea) had less effect on denaturing and release of Fe(3+) from the Tf binding pocket compared to changes in ionic strength. This journal is © The Royal Society of Chemistry 2011
[Exposure to hazardous chemical substances in furniture industry].
Pośniak, Małgorzata; Kowalska, Joanna; Makhniashvili, Ivan
2005-01-01
The aim of the study was to assess the exposure to organic solvents in plants of the furniture industry. Studies were conducted in five furniture plants. Hazardous chemicals present in the air at workposts were determined by capillary gas chromatography with mass spectrometry and flame ionization detection. The analysis of air samples collected at the workposts allowed to identify the following chemicals occurring during varnishing and cleaning of furniture surface elements: acetone, butan-2-one, ethyl, isobutyl and methoxypropyl acetate, 4-methylpentan-2-on, toluene, ethylbenzene and xylenes. Indices characteristic of combined exposure ranged from 0.13 to 1.67 and exceeded the limit value at 21% of workposts. The results of the study indicate that chemicals present at representative workposts during the furniture production are harmful to health of workers, especially those involved in varnishing and cleaning of furniture elements.
Kawai, T; Mizunuma, K; Yasugi, T; Horiguchi, S; Iguchi, H; Mutti, A; Ghittori, S; Ikeda, M
1995-01-01
OBJECTIVES--To investigate the possibilities of personal ambient monitoring and biological monitoring for methylpentane isomers. METHODS--The performance of activated carbon cloth to absorb 2- and 3-methylpentane was studied by experimental vapour exposure followed by solvent extraction and gas chromatography (GC). Urine from workers and rats exposed to 2- and 3-methylpentane was analysed by GC with or without acid or enzymatic hydrolysis. RESULTS--Carbon cloth absorbed 2- and 3-methylpentane linearly to exposures up to eight hours and to 400 ppm, and was sensitive enough to detect a 15 minute peak of exposure. The two isomers were clearly separated from hexane on a DB-1 column. For analysis of the urine, enzymatic hydrolysis was superior to acid hydrolysis. Exposure of rats to methylpentane vapours showed that 2-methyl-2-pentanol and 3-methyl-2-pentanol were excreted in urine in proportion to the dose of 2-methylpentane and 3-methylpentane, respectively. 2-Methyl derivatives of 1-, 3-, and 4-propanol, 2-methylpentane-2,4-diol, and 3-methyl-2-pentanol were minor metabolites. Analysis of urine from the exposed workers showed that 2-methyl- and 3-methyl-2-pentanol are leading urinary metabolites after exposure to the corresponding methylpentane. CONCLUSIONS--Diffusive sampling is applicable to monitor 2- and 3-methylpentane vapours as is the case for hexane vapour. 2-Methyl-2-pentanol and 3-methyl-2-pentanol will be markers of occupational exposure to 2-methylpentane and 3-methylpentane, respectively. Also, 2-methylpentane-2,4-diol might be a marker of exposure to 2-methylpentane. PMID:8535496
Hydrophobic potential of mean force as a solvation function for protein structure prediction.
Lin, Matthew S; Fawzi, Nicolas Lux; Head-Gordon, Teresa
2007-06-01
We have developed a solvation function that combines a Generalized Born model for polarization of protein charge by the high dielectric solvent, with a hydrophobic potential of mean force (HPMF) as a model for hydrophobic interaction, to aid in the discrimination of native structures from other misfolded states in protein structure prediction. We find that our energy function outperforms other reported scoring functions in terms of correct native ranking for 91% of proteins and low Z scores for a variety of decoy sets, including the challenging Rosetta decoys. This work shows that the stabilizing effect of hydrophobic exposure to aqueous solvent that defines the HPMF hydration physics is an apparent improvement over solvent-accessible surface area models that penalize hydrophobic exposure. Decoys generated by thermal sampling around the native-state basin reveal a potentially important role for side-chain entropy in the future development of even more accurate free energy surfaces.
Method of preparation of removable syntactic foam
DOE Office of Scientific and Technical Information (OSTI.GOV)
Arnold, C. Jr.; Derzon, D.K.; Nelson, J.S.
1995-07-11
Easily removable, environmentally safe, low-density, syntactic foams are disclosed which are prepared by mixing insoluble microballoons with a solution of water and/or alcohol-soluble polymer to produce a pourable slurry, optionally vacuum filtering the slurry in varying degrees to remove unwanted solvent and solute polymer, and drying to remove residual solvent. The properties of the foams can be controlled by the concentration and physical properties of the polymer, and by the size and properties of the microballoons. The suggested solute polymers are non-toxic and soluble in environmentally safe solvents such as water or low-molecular weight alcohols. The syntactic foams produced bymore » this process are particularly useful in those applications where ease of removability is beneficial, and could find use in packaging recoverable electronic components, in drilling and mining applications, in building trades, in art works, in the entertainment industry for special effects, in manufacturing as temporary fixtures, in agriculture as temporary supports and containers and for delivery of fertilizer, in medicine as casts and splints, as temporary thermal barriers, as temporary protective covers for fragile objects, as filters for particulate matter, which matter may be easily recovered upon exposure to a solvent, as in-situ valves (for one-time use) which go from maximum to minimum impedance when solvent flows through, and for the automatic opening or closing of spring-loaded, mechanical switches upon exposure to a solvent, among other applications. 1 fig.« less
Aschengrau, Ann; Weinberg, Janice M; Janulewicz, Patricia A; Romano, Megan E; Gallagher, Lisa G; Winter, Michael R; Martin, Brett R; Vieira, Veronica M; Webster, Thomas F; White, Roberta F; Ozonoff, David M
2011-12-02
Many studies of adults with acute and chronic solvent exposure have shown adverse effects on cognition, behavior and mood. No prior study has investigated the long-term impact of prenatal and early childhood exposure to the solvent tetrachloroethylene (PCE) on the affinity for risky behaviors, defined as smoking, drinking or drug use as a teen or adult. This retrospective cohort study examined whether early life exposure to PCE-contaminated drinking water influenced the occurrence of cigarette smoking, alcohol consumption, and drug use among adults from Cape Cod, Massachusetts. Eight hundred and thirty-one subjects with prenatal and early childhood PCE exposure and 547 unexposed subjects were studied. Participants completed questionnaires to gather information on risky behaviors as a teenager and young adult, demographic characteristics, other sources of solvent exposure, and residences from birth through 1990. PCE exposure was estimated using the U.S. EPA's water distribution system modeling software (EPANET) that was modified to incorporate a leaching and transport model to estimate PCE exposures from pipe linings. Individuals who were highly exposed to PCE-contaminated drinking water during gestation and early childhood experienced 50-60% increases in the risk of using two or more major illicit drugs as a teenager or as an adult (Relative Risk (RR) for teen use = 1.6, 95% CI: 1.2-2.2; and RR for adult use = 1.5, 95% CI: 1.2-1.9). Specific drugs for which increased risks were observed included crack/cocaine, psychedelics/hallucinogens, club/designer drugs, Ritalin without a prescription, and heroin (RRs:1.4-2.1). Thirty to 60% increases in the risk of certain smoking and drinking behaviors were also seen among highly exposed subjects. The results of this study suggest that risky behaviors, particularly drug use, are more frequent among adults with high PCE exposure levels during gestation and early childhood. These findings should be confirmed in follow-up investigations of other exposed populations.
Mixed organic solvents induce renal injury in rats.
Qin, Weisong; Xu, Zhongxiu; Lu, Yizhou; Zeng, Caihong; Zheng, Chunxia; Wang, Shengyu; Liu, Zhihong
2012-01-01
To investigate the injury effects of organic solvents on kidney, an animal model of Sprague-Dawley (SD) rats treated with mixed organic solvents via inhalation was generated and characterized. The mixed organic solvents consisted of gasoline, dimethylbenzene and formaldehyde (GDF) in the ratio of 2:2:1, and were used at 12,000 PPM to treat the rats twice a day, each for 3 hours. Proteinuria appeared in the rats after exposure for 5-6 weeks. The incidences of proteinuria in male and female rats after exposure for 12 weeks were 43.8% (7/16) and 25% (4/16), respectively. Urinary N-Acetyl-β-(D)-Glucosaminidase (NAG) activity was increased significantly after exposure for 4 weeks. Histological examination revealed remarkable injuries in the proximal renal tubules, including tubular epithelial cell detachment, cloud swelling and vacuole formation in the proximal tubular cells, as well as proliferation of parietal epithelium and tubular reflux in glomeruli. Ultrastructural examination found that brush border and cytoplasm of tubular epithelial cell were dropped, that tubular epithelial cells were partially disintegrated, and that the mitochondria of tubular epithelial cells were degenerated and lost. In addition to tubular lesions, glomerular damages were also observed, including segmental foot process fusion and loss of foot process covering on glomerular basement membrane (GBM). Immunofluorescence staining indicated that the expression of nephrin and podocin were both decreased after exposure of GDF. In contrast, increased expression of desmin, a marker of podocyte injury, was found in some areas of a glomerulus. TUNEL staining showed that GDF induced apoptosis in tubular cells and glomerular cells. These studies demonstrate that GDF can induce both severe proximal tubular damage and podocyte injury in rats, and the tubular lesions appear earlier than that of glomeruli.
Mixed Organic Solvents Induce Renal Injury in Rats
Qin, Weisong; Xu, Zhongxiu; Lu, Yizhou; Zeng, Caihong; Zheng, Chunxia; Wang, Shengyu; Liu, Zhihong
2012-01-01
To investigate the injury effects of organic solvents on kidney, an animal model of Sprague-Dawley (SD) rats treated with mixed organic solvents via inhalation was generated and characterized. The mixed organic solvents consisted of gasoline, dimethylbenzene and formaldehyde (GDF) in the ratio of 2∶2:1, and were used at 12,000 PPM to treat the rats twice a day, each for 3 hours. Proteinuria appeared in the rats after exposure for 5–6 weeks. The incidences of proteinuria in male and female rats after exposure for 12 weeks were 43.8% (7/16) and 25% (4/16), respectively. Urinary N-Acetyl-β-(D)-Glucosaminidase (NAG) activity was increased significantly after exposure for 4 weeks. Histological examination revealed remarkable injuries in the proximal renal tubules, including tubular epithelial cell detachment, cloud swelling and vacuole formation in the proximal tubular cells, as well as proliferation of parietal epithelium and tubular reflux in glomeruli. Ultrastructural examination found that brush border and cytoplasm of tubular epithelial cell were dropped, that tubular epithelial cells were partially disintegrated, and that the mitochondria of tubular epithelial cells were degenerated and lost. In addition to tubular lesions, glomerular damages were also observed, including segmental foot process fusion and loss of foot process covering on glomerular basement membrane (GBM). Immunofluorescence staining indicated that the expression of nephrin and podocin were both decreased after exposure of GDF. In contrast, increased expression of desmin, a marker of podocyte injury, was found in some areas of a glomerulus. TUNEL staining showed that GDF induced apoptosis in tubular cells and glomerular cells. These studies demonstrate that GDF can induce both severe proximal tubular damage and podocyte injury in rats, and the tubular lesions appear earlier than that of glomeruli. PMID:23029287
Effect of reduced use of organic solvents on disability pension in painters
Järvholm, Bengt; Burdorf, Alex
2017-01-01
Objective To investigate whether the decreased use of paints based on organic solvents has caused a decreased risk for neuropsychiatric disorders in painters by studying their incidence in disability pensions. Methods The incidence of disability pension in Swedish painters who had participated in health examinations between 1971 and 1993 was studied through linkage with Swedish registers of disability pension over 1971–2010 and compared with the incidence in other construction workers as woodworkers, concrete workers and platers. When phasing out began in the 1970s, about 40% of paints were based on organic solvents and it had decreased to 4% in 1990s. The analysis was adjusted for age, time period, body mass index and smoking. Results The painters (n=23 065) had an increased risk of disability pension due to neurological diagnosis (n=285, relative risk (RR) 1.92, 95% CI 1.67 to 2.20) and psychiatric diagnosis (n=632, RR=1.61, 95 % CI 1.42 to 1.82). For neurological disorders there was a time trend with a continuously decreasing risk from 1980 onwards, but there was no such trend for psychiatric disorders. Conclusions High exposure to organic solvents increased the risk for disability pension in neurological disorders, and the risk decreased when the use of organic solvents decreased. The painters also had an increased risk of disability pension due to psychiatric disorders, but the causes have to be further investigated. PMID:28780566
2012-01-01
Background Response surface methodology by Box–Behnken design employing the multivariate approach enables substantial improvement in the method development using fewer experiments, without wastage of large volumes of organic solvents, which leads to high analysis cost. This methodology has not been employed for development of a method for analysis of atorvastatin calcium (ATR-Ca). Results The present research study describes the use of in optimization and validation of a new microwell-based UV-Visible spectrophotometric method of for determination of ATR-Ca in its tablets. By the use of quadratic regression analysis, equations were developed to describe the behavior of the response as simultaneous functions of the selected independent variables. Accordingly, the optimum conditions were determined which included concentration of 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), time of reaction and temperature. The absorbance of the colored-CT complex was measured at 460 nm by microwell-plate absorbance reader. The method was validated, in accordance with ICH guidelines for accuracy, precision, selectivity and linearity (r² = 0.9993) over the concentration range of 20–200 μg/ml. The assay was successfully applied to the analysis of ATR-Ca in its pharmaceutical dosage forms with good accuracy and precision. Conclusion The assay described herein has great practical value in the routine analysis of ATR-Ca in quality control laboratories, as it has high throughput property, consumes minimum volume of organic solvent thus it offers the reduction in the exposures of the analysts to the toxic effects of organic solvents, environmentally friendly "Green" approach) and reduction in the analysis cost by 50-fold. PMID:23146143
Mortality in the British rubber industry 1946-85.
Sorahan, T; Parkes, H G; Veys, C A; Waterhouse, J A; Straughan, J K; Nutt, A
1989-01-01
The mortality experienced by a cohort of 36,691 rubber workers during 1946-85 has been investigated. These workers were all male operatives first employed in any one of the 13 participating factories in 1946-60; all had worked continuously in the industry for a minimum period of one year. Compared with the general population, statistically significant excesses relating to cancer mortality were found for cancer of the pharynx (E = 20.2, O = 30, SMR = 149), oesophagus (E = 87.6, O = 107, SMR = 122), stomach (E = 316.5, O = 359, SMR = 113), lung (E = 1219.2, O = 1592, SMR = 131), and all neoplasms (E = 2965.6, O = 3344, SMR = 113). Statistically significant deficits were found for cancer of the prostate. (E = 128.2, O = 91, SMR = 71), testis (E = 11.0, O = 4, SMR = 36), and Hodgkin's disease (E = 26.9, O = 16, SMR = 59). Involvement of occupational exposures was assessed by the method of regression models and life tables (RMLT). This method was used to compare the duration of employment in the industry, the duration in "dust exposed" jobs, and the duration in "fume and/or solvent exposed" jobs of those dying from causes of interest with those of all matching survivors. Positive associations (approaching formal levels of statistical significance) were found only for cancers of the stomach and the lung. The results of the RMLT analysis are independent of those from the SMR analysis, and the study continues to provide limited evidence of a causal association between the risks of stomach cancer and dust exposures, and the risks of lung cancer and fume or solvent exposures in the rubber industry during the period under study. PMID:2920137
NEUROTOXICITY CHEMICAL MIXTURES: AN EXAMPLE OF OTOTOXICITY PRODUCED BY COMBINED SOLVENTS.
There are relatively few studies in the experimental literature examining the toxicity of combined exposure to environmental neurotoxicants. In the absence of experimental data, risk assessment evaluations of such exposures typically assume that toxicity is an additive combinati...
The time course of exposure to p-nonylphenol (NP) from two different sources was compared to equalivent exposures of 17-
-estradiol (E2) and a solvent control (ethanol; EtOH). Japanese medaka were exposed for 4 days to a nomina...
Gupta, Manoj Kumar; Jain, Rajeev; Singh, Pratibha; Ch, Ratnasekhar; Mudiam, Mohana Krishna Reddy
2015-06-01
Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous environmental pollutants and well-known carcinogens. Hydroxy derivatives of PAH are considered as biomarkers of PAH exposure, and there is a need to measure these metabolites at low concentrations. So, a precise and eco-friendly analytical method has been developed for rapid determination of PAH metabolites. For the first time, a new analytical method based on coupling of dispersive liquid-liquid microextraction (DLLME) with auto-injector port silylation (auto-IPS) followed by gas chromatography-tandem mass spectrometry (GC-MS-MS) analysis is reported for the analysis of seven urinary PAH metabolites. Factors affecting DLLME and IPS, such as type and volume of extraction and disperser solvent, pH, ionic strength, injector port temperature, volume of N,O-bis(trimethylsilyl)trifluoroacetamide and type of solvent were investigated. Under optimized conditions, the limit of detection and limit of quantification were found to be in the range of 1-9 and 3-29 ng/mL, respectively. Satisfactory recoveries of metabolites in urine samples in the range of 87-95% were found. The developed method has been successfully applied for the determination of PAH metabolites in urine samples of exposed workers. DLLME-auto-IPS-GC-MS-MS method is time, labor, solvent and reagent saving, which can be routinely used for the analysis of urinary PAH metabolites. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
Water-induced nanochannel networks in self-assembled block ionomers
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mineart, Kenneth P.; Al-Mohsin, Heba A.; Lee, Byeongdu
2016-03-07
Block ionomers cast from solution exhibit solvent-templated morphologies that can be altered by solvent-vapor annealing. When cast from a mixed solvent, a midblock-sulfonated pentablock ion- omer self-assembles into spherical ionic microdomains that are loosely connected. Upon exposure to liquid water, nanoscale channels irreversibly develop between the microdomains due to swelling and form a continuous mesoscale network. We use electron tomography and real-time X-ray scat- tering to follow this transformation and show that the resultant morphology provides a highly effec- tive diffusive pathway.
Toluene-induced hearing loss in the guinea pig.
Waniusiow, Delphine; Campo, Pierre; Venet, Thomas; Cossec, Benoît; Cosnier, Frédéric; Beydon, Dominique; Rieger, Benoît; Burgart, Manuella; Ferrari, Luc; Parietti-Winkler, Cécile
2009-10-01
Toluene is a high-production industrial solvent, which can disrupt the auditory system in rats. However, toluene-induced hearing loss is species dependent. For instance, despite long-lasting exposures to high concentrations of aromatic solvent, no study has yet succeeded in causing convincing hearing loss in the guinea pig. This latter species can be characterized by two metabolic particularities: a high amount of hepatic cytochrome P-450s (P-450s) and a high concentration of glutathione in the cochlea. It is therefore likely that the efficiency of both the hepatic and cochlear metabolisms plays a key role in the innocuousness of the hearing of guinea pigs to exposure to solvent. The present study was carried out to test the auditory resistance to toluene in glutathione-depleted guinea pigs whose the P-450 activity was partly inhibited. To this end, animals on a low-protein diet received a general P-450 inhibitor, namely SKF525-A. Meanwhile, they were exposed to 1750 ppm toluene for 4 weeks, 5 days/week, 6 h/day. Auditory function was tested by electrocochleography and completed by histological analyses. For the first time, a significant toluene-induced hearing loss was provoked in the P-450-inhibited guinea pigs. However, the ototoxic process caused by the solvent exposure was different from that observed in the rat. Only the stria vascularis and the spiral fibers were disrupted in the apical coil of the cochlea. The protective mechanisms developed by guinea pigs are discussed in the present publication.
Somnier, F E; Ostergaard, M S; Boysen, G; Bruhn, P; Mikkelsen, B O
1990-01-01
In order to examine if the nootropic drug, aniracetam, was capable of improving cognitive performance, 44 subjects suffering from chronic psychosyndrome after long-term exposure to organic solvents were included in a randomized, double-blind, placebo-controlled, cross-over study. The treatment periods were 3 months with aniracetam 1 g daily and 3 months with placebo. Neuropsychological tests as well as a physical and neurological examination were performed at entry into the study and after each treatment period, together with an evaluation of the subjects' overall condition. Neither the doctors' nor the subjects' own assessment of the overall condition indicated that the trial medication had had any effect. No significant changes in neuropsychological symptoms were observed. A statistically significant difference in favour of antiracetam was found in only 1 of the 19 neuropsychological test measures, namely a test for constructional ability. However, in another test on visuo-spatial function, a statistically significant result was found in favour of placebo. Thus, aniracetam was found to be ineffective in the treatment of subjects suffering from chronic psychosyndrome after long-term exposure to organic solvents.
NASA Astrophysics Data System (ADS)
Yun, Dong-Jin; Kim, Jung-Hwa; Kim, Seong Heon; Seol, Minsu; Yu, DaEun; Kwon, Hyukju; Ham, Yongnam; Chung, JaeGwan; Kim, Yongsu; Heo, Sung
2016-04-01
In most solution-processed organic devices, a poly(3,4-ethylenedioxythiophene) (PEDOT) polymerized with poly(4-styrenesulfonate) (PSS) film is inevitably affected by various conditions during the subsequent solution-coating processes. To investigate the effects of direct solvent exposure on the properties of PEDOT polymerized with PSS (PEDOT:PSS) films, photoemission spectroscopy-based analytical methods were used before and after solvent-coating processes. Our results clearly indicate that PEDOT:PSS films undergo a different transition mechanism depending on the solubility of the solvent in water. The water-miscible solvents induce the solvation of hydrophilic PSS chains. As a result, this process allows the solvent to diffuse into the PEDOT:PSS film, and a conformational change between PEDOT and PSS occurs. On the other hand, the water-immiscible organic solvents cause the partial adsorption of solvent molecules at the PE surface, which leads to changes in the surface properties, including work function. Based on our finding, we demonstrate that the energy-level alignments at the organic semiconductor/electrode interface for the PEDOT:PSS films can be controlled by simple solvent treatments.
Long Duration Exposure Facility
1988-06-30
Blue and Oxazine Dyes- Name Absorption -mazimu= Lasing Wavelengths un. un. (solvent) (solvent) Nile Blue A, 635 690 Perchlorate (ethanol) (ethanol...Fluence(/cm Etching 5 Al 3.5 MeV 5x10 6 N NaOH 6 o BI8 PrQtons Ixl0 50 C, 15 hr. 6 C9 (normal 3x10 (2 sided) incidence) 01 (unirradiated) 5 DIS 2.0
METHODOLOGICAL ISSUES IN HUMAN EXPOSURE STUDIES OF LOW LEVEL SOLVENT MIXTURES
The design of appropriate studies to assess the sensory irritant and neurobehavioral-effects of exposure to complex VOC mixtures poses a variety of methodological challenges, particularly at the low levels found in new buildings. or instance, Otto et al (1989) exposed subjects to...
Effect of reduced use of organic solvents on disability pension in painters.
Järvholm, Bengt; Burdorf, Alex
2017-11-01
To investigate whether the decreased use of paints based on organic solvents has caused a decreased risk for neuropsychiatric disorders in painters by studying their incidence in disability pensions. The incidence of disability pension in Swedish painters who had participated in health examinations between 1971 and 1993 was studied through linkage with Swedish registers of disability pension over 1971-2010 and compared with the incidence in other construction workers as woodworkers, concrete workers and platers. When phasing out began in the 1970s, about 40% of paints were based on organic solvents and it had decreased to 4% in 1990s. The analysis was adjusted for age, time period, body mass index and smoking. The painters (n=23 065) had an increased risk of disability pension due to neurological diagnosis (n=285, relative risk (RR) 1.92, 95% CI 1.67 to 2.20) and psychiatric diagnosis (n=632, RR=1.61, 95 % CI 1.42 to 1.82). For neurological disorders there was a time trend with a continuously decreasing risk from 1980 onwards, but there was no such trend for psychiatric disorders. High exposure to organic solvents increased the risk for disability pension in neurological disorders, and the risk decreased when the use of organic solvents decreased. The painters also had an increased risk of disability pension due to psychiatric disorders, but the causes have to be further investigated. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
Equilibrium disorders in workers exposed to mixed solvents.
Giorgianni, Concetto; Tanzariello, Mariagiuseppina; De Pasquale, Domenico; Brecciaroli, Renato; Spatari, Giovanna
2018-02-06
Organic solvents cause diseases of the vestibular system. However, little is known regarding the correlation between vestibular damage and exposure to organic solvents below threshold limit values. The best measure by which to evaluate vestibular disorders is static and dynamic posturography. The aim of this study was to evaluate equilibrium disorders via static and dynamic posturography in workers without clear symptoms and exposed to low doses of mixed solvents. 200 subjects were selected. Using an Otometrics device (Madsen, Denmark), all subjects endured static and dynamic posturography testing with both eyes-open and eyes-closed conditions. Results were compared with a control group of unexposed individuals. Based on the obtained data, the following results can be drawn: (a) subjects exposed to mixtures of solvents show highly significant differences regarding all static and dynamic posturography parameters in comparison to the control group; (b) posturography testing has proven to be a valid means by which to detect subliminal equilibrium disorders in subjects exposed to solvents. We can confirm that refinery workers exposed to mixtures of solvents can present subliminal equilibrium disorders. Early diagnosis of the latter is made possible by static and dynamic posturography.
Steendahl, U; Prescott, E; Damsgaard, M T
1992-05-11
The substance methylmethacrylate (MMA) is an organic solvent which is employed inter alii for prostheses which is suspected of being neurotoxic. With the object of illustrating whether there is a connection between exposure to MMA and symptoms of organic dementia, a cross-sectional investigation was carried out on a population consisting of occupationally active dental technicians and opticians (n = 528) and a group of dental technicians who were no longer occupationally active (n = 173). No noteworthy difference in the background variables, apart from age, was observed. Age was taken into consideration in the analysis. The results show a statistically significant increase in the prevalence of the chronic symptoms on increasing exposure. Where the acute symptoms are concerned, the connection is not statistically significant, but a tendency is observed. A chronic symptom index constructed on the basis of 13 questions concerning chronic symptoms is compared with the life exposure and the age. A statistically significant increase in the index was found with exposure to MMA, although not for the oldest age group. The pattern symptoms, presence of bias and other forms of exposure are discussed. It is concluded that this investigation confirms the hypothesis that symptoms of organic dementia have a connection the exposure to MMA. The results support the presumption that MMA causes acute and chronic damage to the central nervous system even with exposure below the safety limits. It is recommended that the occupational environment of dental technicians, including the present safety limits, should be revised.
Alzoman, Nourah Z.; Alshehri, Jamilah M.; Darwish, Ibrahim A.; Khalil, Nasr Y.; Abdel-Rahman, Hamdy M.
2014-01-01
The reaction of 2,3-dichloro-1,4-naphthoquinone (DCNQ) with crizotinib (CZT; a novel drug used for treatment of non-small cell lung cancer) was investigated in different solvents of varying dielectric constants and polarity indexes. The reaction produced a red-colored product. Spectrophotometric investigations confirmed that the reaction proceeded through charge–transfer (CT) complex formation. The molar absorptivity of the complex was found to be linearly correlated with the dielectric constant and polarity index of the solvent; the correlation coefficients were 0.9567 and 0.9069, respectively. The stoichiometric ratio of DCNQ:CZT was found to be 2:1 and the association constant of the complex was found to be 1.07 × 102 l/mol. The kinetics of the reaction was studied; the order of the reaction, rate and rate constant were determined. Computational molecular modeling for the complex between DCNQ and CZT was conducted, the sites of interaction on CZT molecule were determined, and the mechanism of the reaction was postulated. The reaction was employed as a basis in the development of a novel 96-microwell assay for CZT in a linear range of 4–500 μg/ml. The assay limits of detection and quantitation were 2.06 and 6.23 μg/ml, respectively. The assay was validated as per the guidelines of the International Conference on Harmonization (ICH) and successfully applied to the analysis of CZT in its bulk and capsules with good accuracy and precision. The assay has high throughput and consumes a minimum volume of organic solvents thus it reduces the exposures of the analysts to the toxic effects of organic solvents, and significantly reduces the analysis cost. PMID:25685046
Occupational and environmental risk factors of the myelodysplastic syndromes in the North of France.
Nisse, C; Haguenoer, J M; Grandbastien, B; Preudhomme, C; Fontaine, B; Brillet, J M; Lejeune, R; Fenaux, P
2001-03-01
Aetiological factors of the myelodysplastic syndromes (MDS) are largely unknown, with the exception of alkylating agents, ionizing radiation and benzene. Some other risk factors have been suggested by the few epidemiological studies reported (solvents, ammonia, exhaust gases, metals, pesticides, alcohol). We performed a case-control study to assess the relationship between occupational or environmental factors and MDS. Two hundred and four patients with newly diagnosed MDS, and 204 sex- and age-matched controls were included. Medical history, demographic data, lifetime exposure and hobbies were obtained. Qualitative and quantitative exposure to chemical and physical hazards were evaluated with the patients and reviewed by a group of experts in occupational exposure. The median age was 70 years and 62% of the patients were men. In univariate analyses, we found relationships between MDS and smoking habits, gardening, occupations such as health professionals, technical and sale representatives, machine operators, agricultural workers, textile workers, qualitative occupational exposures (exposed/non-exposed) to oil, solvents, ammonia, pesticides, fertilizers, cereal dusts, contact with poultry or livestock and infective risk, and lifetime cumulative exposure to solvents, oil, textile dust and infective risk. The main risk factors of MDS determined by multivariate analyses (conditional logistic regression) were, being an agricultural worker [odds ratio (OR) = 3.66; 95% confidence interval (CI) 1.9-7.0], textile operator (OR = 3.66; 95% CI 1.9-7.9), health professional (OR = 10.0; 95% CI 2.1-48.7), commercial and technical sale representative (OR = 4.45; 95% CI 1.4-14.6), machine operator (OR = 2.69; 95% CI 1.2-6.0), living next to an industrial plant (OR = 2.45; 95% CI 1.5-4.1), smoking (OR = 1.74; 95% CI 1.1-2.7) and lifetime cumulative exposure to oil (OR = 1.1; 95% CI 1.0-1.2). Further studies should be performed to assess specific exposures more precisely and it would be of interest to develop a map of haematological malignancies according to industrial background.
Method And Apparatus For Production Of Bi-213 From The Activity Ac-225 Source
Egorov, Oleg B.; O'Hara, Matthew J.
2005-12-06
A method and apparatus for isolating and purifying a .sup.213 Bi radioactive isotope from an .sup.225 Ac source using a primary column and a primary sorbent which preferentially retains .sup.225 Ac over .sup.213 Bi when exposed to a compatible solvent in combination with a secondary column having a secondary sorbent which retains .sup.213 Bi when exposed to a mixture of the compatible solvent and .sup.213 Bi. A "compatible solvent" is a solvent which will preferentially remove .sup.213 Bi radioactive isotopes from a primary sorbent without removing .sup.225 Ac radioactive isotopes, and then allow .sup.213 Bi radioactive isotopes removed from the primary sorbent to be retained on a secondary sorbent, without having to dilute or otherwise chemically or physically modify the compatible solvent in between exposure to the primary and secondary sorbents.
2011-01-01
Background Many studies of adults with acute and chronic solvent exposure have shown adverse effects on cognition, behavior and mood. No prior study has investigated the long-term impact of prenatal and early childhood exposure to the solvent tetrachloroethylene (PCE) on the affinity for risky behaviors, defined as smoking, drinking or drug use as a teen or adult. Objectives This retrospective cohort study examined whether early life exposure to PCE-contaminated drinking water influenced the occurrence of cigarette smoking, alcohol consumption, and drug use among adults from Cape Cod, Massachusetts. Methods Eight hundred and thirty-one subjects with prenatal and early childhood PCE exposure and 547 unexposed subjects were studied. Participants completed questionnaires to gather information on risky behaviors as a teenager and young adult, demographic characteristics, other sources of solvent exposure, and residences from birth through 1990. PCE exposure was estimated using the U.S. EPA's water distribution system modeling software (EPANET) that was modified to incorporate a leaching and transport model to estimate PCE exposures from pipe linings. Results Individuals who were highly exposed to PCE-contaminated drinking water during gestation and early childhood experienced 50-60% increases in the risk of using two or more major illicit drugs as a teenager or as an adult (Relative Risk (RR) for teen use = 1.6, 95% CI: 1.2-2.2; and RR for adult use = 1.5, 95% CI: 1.2-1.9). Specific drugs for which increased risks were observed included crack/cocaine, psychedelics/hallucinogens, club/designer drugs, Ritalin without a prescription, and heroin (RRs:1.4-2.1). Thirty to 60% increases in the risk of certain smoking and drinking behaviors were also seen among highly exposed subjects. Conclusions The results of this study suggest that risky behaviors, particularly drug use, are more frequent among adults with high PCE exposure levels during gestation and early childhood. These findings should be confirmed in follow-up investigations of other exposed populations. PMID:22136431
Toluene is found in petroleum-based fuels and used as a solvent in consumer products and industrial applications. The critical effects following inhalation exposure involve the brain and nervous system in both humans and experimental animals whether exposure duration is acute or...
Toluene is found in petroleum-based fuels and used as a solvent in consumer products and industrial applications. The critical effects following inhalation exposure involve the brain and nervous system in both humans and experimental animals whether exposure duration is acute or...
The two major sources of arsenic exposure are water and diet. Dietary exposure is considerably more difficult to assess because of the diversity of arsenicals present in dietary matrices coupled with species dependent toxicity of arsenic. Dietary arsenic assessments are further c...
Toluene, a solvent used in numerous consumer and industrial applications, exerts its critical effects on the brain and nervous system following inhalation exposure. Our previously published PBPK model successfully predicted toluene concentrations in blood and brain over a range o...
Tsukagoshi, Norihiko; Aono, Rikizo
2000-01-01
Growth of Escherichia coli is inhibited upon exposure to a large volume of a harmful solvent, and there is an inverse correlation between the degree of inhibition and the log POW of the solvent, where POW is the partition coefficient measured for the partition equilibrium established between the n-octanol and water phases. The AcrAB-TolC efflux pump system is involved in maintaining intrinsic solvent resistance. We inspected the solvent resistance of ΔacrAB and/or ΔtolC mutants in the presence of a large volume of solvent. Both mutants were hypersensitive to weakly harmful solvents, such as nonane (log POW = 5.5). The ΔtolC mutant was more sensitive to nonane than the ΔacrAB mutant. The solvent entered the E. coli cells rapidly. Entry of solvents with a log POW higher than 4.4 was retarded in the parent cells, and the intracellular levels of these solvents were maintained at low levels. The ΔtolC mutant accumulated n-nonane or decane (log POW = 6.0) more abundantly than the parent or the ΔacrAB mutant. The AcrAB-TolC complex likely extrudes solvents with a log POW in the range of 3.4 to 6.0 through a first-order reaction. The most favorable substrates for the efflux system were considered to be octane, heptane, and n-hexane. PMID:10940021
Unexpected Analyte Oxidation during Desorption Electrospray Ionization - Mass Spectrometry
DOE Office of Scientific and Technical Information (OSTI.GOV)
Pasilis, Sofie P; Kertesz, Vilmos; Van Berkel, Gary J
2008-01-01
During the analysis of surface spotted analytes using desorption electrospray ionization mass spectrometry (DESI-MS), abundant ions are sometimes observed that appear to be the result of oxygen addition reactions. In this investigation, the effect of sample aging, the ambient lab environment, spray voltage, analyte surface concentration, and surface type on this oxidative modification of spotted analytes, exemplified by tamoxifen and reserpine, during analysis by desorption electrospray ionization mass spectrometry was studied. Simple exposure of the samples to air and to ambient lighting increased the extent of oxidation. Increased spray voltage lead also to increased analyte oxidation, possibly as a resultmore » of oxidative species formed electrochemically at the emitter electrode or in the gas - phase by discharge processes. These oxidative species are carried by the spray and impinge on and react with the sampled analyte during desorption/ionization. The relative abundance of oxidized species was more significant for analysis of deposited analyte having a relatively low surface concentration. Increasing spray solvent flow rate and addition of hydroquinone as a redox buffer to the spray solvent were found to decrease, but not entirely eliminate, analyte oxidation during analysis. The major parameters that both minimize and maximize analyte oxidation were identified and DESI-MS operational recommendations to avoid these unwanted reactions are suggested.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nichting, A.T.
1987-07-01
In response to a request from employees at the Devil's Lake Sioux Manufacturing Corporation located in Fort Totten, North Dakota, a study was made to determine a possible health hazard from n-hexane exposure and other organic solvents used in the manufacture of Kevlar combat helmets at the facility. Ten women working as edgers had been treated for carpal tunnel syndrome. Air samples revealed concentrations of xylene ranging from not detectable to 6.44 mg/m/sup 3/, toluene ranging from 0.46 to 33.2 mg/m/sup 3/, hexane ranging from 0.27 to 83.3 mg/m/sup 3/, and methyl ethyl ketone ranging from 20.0 to 310 mg/m/supmore » 3/. These levels were highest in the areas of the facility where edgers and glue spray booth operators worked. The author concludes that solvent exposures in these locations posed a potential health hazard. The carpal tunnel syndrome complaints appear to be related to ergonomic factors. The author recommends the substitution of less-toxic materials in the workplace; applying proper engineering controls; improving local-exhaust ventilation; providing protective clothing for workers; sampling of employees for organic solvent exposure at regular intervals; and informing the employees of all hazards inherent in their work.« less
Hair decontamination procedure prior to multi-class pesticide analysis.
Duca, Radu-Corneliu; Hardy, Emilie; Salquèbre, Guillaume; Appenzeller, Brice M R
2014-06-01
Although increasing interest is being observed in hair analysis for the biomonitoring of human exposure to pesticides, some limitations still have to be addressed for optimum use of this matrix in that specific context. One main possible issue concerns the need to differentiate chemicals biologically incorporated into hair from those externally deposited on hair surface from contaminated air or dust. The present study focuses on the development of a washing procedure for the decontamination of hair before analysis of pesticides from different chemical classes. For this purpose, three different procedures of artificial contamination (with silica, cellulose, and aqueous solution) were used to simulate pesticides deposition on hair surface. Several washing solvents (four organic: acetone, dichloromethane, methanol, acetonitrile; and four aqueous: water, phosphate buffer, shampoo, sodium dodecylsulfate) were evaluated for their capacity to remove artificially deposited pesticides from hair surface. The most effective washing solvents were sodium dodecylsulfate and methanol for aqueous and organic solvents, respectively. Moreover, after a first washing with sodium dodecylsulfate or methanol, the majority of externally deposited pesticides was removed and a steady-state was reached since significantly lower amounts were removed by additional second and third washings. Finally, the effectiveness of a decontamination procedure comprising washing with sodium dodecylsulfate and methanol was successively demonstrated. In parallel, it was determined that the final procedure did not affect the chemicals biologically incorporated, as hair strands naturally containing pesticides were used. Such a procedure appears to remove in one-shot the fraction of chemicals located on hair surface and does not require repeated washing steps. Copyright © 2014 John Wiley & Sons, Ltd.
NASA Astrophysics Data System (ADS)
Monajjemi, M.; Afsharnezhad, S.; Jaafari, M. R.; Abdolahi, T.; Nikosade, A.; Monajemi, H.
2007-12-01
The chemical and petrochemical industries are the major air polluters. Millions of workers are exposed to toxic chemicals on the job, and it is becoming more toxic, causing much damage to respiratory system, today. One of the main components of lung alveoli is a surfactant. DPPC (Dipalmitolphosphatidylcholine) is the predominant lipid component in the lung surfactant, which is responsible for lowering surface tension in alveoli. In this article, we used an approximate model and ab initio computations to describe interactions between DPPC and some chemical solvents, such as benzene, toluene, heptane, acetone, chloroform, ether, and ethanol, which cause lung injuries and lead to respiratory distress such as ARDS. The effect of these solvents on the conformation and disordering of the DPPC head group was investigated by calculations at the Hatree-Fock level using the 6-31G basis set with the Onsager continuum solvation, GAIO, and frequency models. The simulation model was confirmed by accurate NMR measurements as concerns conformational energy. Water can be the most suitable solvent for DPPC. Furthermore, this study shows that ethanol has the most destructive effect on the conformation and lipid disorder of the DPPC head group of the lung surfactant in our model. Our finding will be useful for detecting the dysfunction of DPPC in the lung surfactant caused by acute or chronic exposures to air toxics from petrochemical organic solvent emission source and chronic alcohol consumption, which may lead to ARDS.
Criteria for solvent-induced chronic toxic encephalopathy: a systematic review.
van der Hoek, J A; Verberk, M M; Hageman, G
2000-08-01
In 1985, a WHO Working Group presented diagnostic criteria and a classification for solvent-induced chronic toxic encephalopathy (CTE). In the same year, the "Workshop on neurobehavioral effects of solvents" in Raleigh, N.C., USA introduced a somewhat different classification for CTE. The objective of this review is to study the diagnostic procedures that are used to establish the diagnosis of CTE, and the extent to which the diagnostic criteria and classification of the WHO, and the classification of the Raleigh Working Group, are applied. A systematic search of studies on CTE was performed, and the diagnostic criteria and use of the WHO and Raleigh classifications were listed. We retrieved 30 original articles published in English from 1985 to 1998, in which CTE was diagnosed. Only two articles did not report the duration of solvent exposure. The type of solvent(s) involved was described in detail in four articles, poorly in 17 articles, and not at all in nine articles. Tests of general intelligence were used in 19 articles, and tests of both attention and mental flexibility and of learning and memory were used in 18 articles. Exclusion, by interview, of potentially confounding conditions, such as somatic diseases with central nervous effects and psychiatric diseases, was reported in 21 and 16 articles, respectively. In only six of the articles were both the WHO diagnostic criteria and the WHO or Raleigh classifications used. In the future, parameters of exposure, psychological test results, and use of medication that possibly affects psychological test results should always be described. We list some advantages and disadvantages of the Raleigh and WHO classifications. To aid inter-study comparisons, the diagnosis of CTE should be categorized and reported according to an internationally accepted classification.
Electronics Manufacturing Seminar Proceedings. 17th Annual
1992-12-01
a CFC Solvent Cleaning Alternative Page 3 In operation dirty parts are immersed in the boil cham- ber where they contact the agitated mixture of...component. Some glycol ethers have an uncertain regulatory future due to a variety of health concerns. Semi-aqueous solvents can have a strong odor . Proper...thermoset 5 materials, elastomers, marking inks, sealants, and locking compounds after repeated exposure to the selected cleaners. Epoxy and polyimide PWBs
Paternal influences on pregnancy complications and birth outcomes
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cleghorn de Rohrmoser, D.C.
1992-01-01
The purpose of this study was to investigate the relationship of selected characteristics of the paternal work environment and occupational history to the incidence of complications in pregnancy, complications in labor and anomalies in birth outcomes. The literature suggested that male exposure to teratogenic hazards in the form of radiation and chemical compounds, primarily in the form of solvents, has been implicated in reproductive disorders and malformed offspring in animals. Similarly, some recent research suggests that the exposure of male workers to such hazards on their job may have consequences for their spouses and children. Based on these experimental researchmore » studies and analyses of persons working in high risk occupations, a broader study of the potential contribution of paternal work environment variables to the success of pregnancy and birth outcomes seemed warranted. Based upon the literature review, a model was proposed for predicting complications in pregnancy, complications in labor and birth outcome (normal birth, low birth weight, congenital malformations and fetal death). From the 1980 National Natality Survey and the 1980 National Fetal Mortality Survey, four sub-samples of married couples, with both husband and wife employed, were selected on the basis of one of the four birth outcomes. The model called for controlling a range of maternal intrinsic and extrinsic health and behavioral variables known to be related to birth outcomes. Multiple logistic regression procedures were used to analyze the effects of father's exposure to radiation and solvents on the job, to complications in pregnancy and labor, and to birth outcome, while controlling for maternal variables. The results indicated that none of the paternal variables were predictors of complications in labor. Further, there was no clear pattern of results, though father's degree of exposure to solvents, and exposures to radiation did reach significance in some analyses.« less
Doran, W.J.; Cope, W.G.; Rada, R.G.; Sandheinrich, M.B.
2001-01-01
The effects of chlorpyrifos, an organophosphorus insecticide, were examined on the activity of the nervous system enzyme acetylcholinesterase (AChE) in the threeridge mussel Amblema plicata in a 24-day laboratory test. Thirty-six mussels in each of seven treatments (18 mussels per duplicate) were exposed to chlorpyrifos (0.1, 0.2, 0.3, 0.6, and 1.2 mg/L), a solvent (acetone), and a solvent-free (well water) control for 12, 24, or 96 h. The activity of AChE was measured in the anterior adductor muscle of eight mussels from each treatment after exposure. To assess potential latent effects, six mussels from each treatment were removed after 24 h of exposure and transferred to untreated water for a 21-day holding period; AChE activity was measured on three mussels from each treatment at 7 and 21 days of the holding period. The activity of AChE in chlorpyrifos-exposed mussels did not differ from controls after 12 or 24 h of exposure (t- test, P>0.05), but was significantly less than controls after 96 h (t- test, P=0.01). AChE activity did not vary among mussels at 24 h of exposure (i.e., Day 0 of holding period) and those at Day 7 and Day 21 of the holding period. Overall changes in AChE activity of mussels during the test were unrelated to individual chlorpyrifos concentrations and exposure times (repeated measure ANOVA; (P=0.06). A power analysis revealed that the sample size must be increased from 2 to 5 replicates (8 to 20 mussels per time interval and test concentration) to increase the probability of detecting significant differences in AChE activity. This calculated increase in sample size has potential implications for future biomonitoring studies with chlorpyrifos and unionid mussels.
Hein, Misty J.; Waters, Martha A.; Ruder, Avima M.; Stenzel, Mark R.; Blair, Aaron; Stewart, Patricia A.
2010-01-01
Objectives: Occupational exposure assessment for population-based case–control studies is challenging due to the wide variety of industries and occupations encountered by study participants. We developed and evaluated statistical models to estimate the intensity of exposure to three chlorinated solvents—methylene chloride, 1,1,1-trichloroethane, and trichloroethylene—using a database of air measurement data and associated exposure determinants. Methods: A measurement database was developed after an extensive review of the published industrial hygiene literature. The database of nearly 3000 measurements or summary measurements included sample size, measurement characteristics (year, duration, and type), and several potential exposure determinants associated with the measurements: mechanism of release (e.g. evaporation), process condition, temperature, usage rate, type of ventilation, location, presence of a confined space, and proximity to the source. The natural log-transformed measurement levels in the exposure database were modeled as a function of the measurement characteristics and exposure determinants using maximum likelihood methods. Assuming a single lognormal distribution of the measurements, an arithmetic mean exposure intensity level was estimated for each unique combination of exposure determinants and decade. Results: The proportions of variability in the measurement data explained by the modeled measurement characteristics and exposure determinants were 36, 38, and 54% for methylene chloride, 1,1,1-trichloroethane, and trichloroethylene, respectively. Model parameter estimates for the exposure determinants were in the anticipated direction. Exposure intensity estimates were plausible and exhibited internal consistency, but the ability to evaluate validity was limited. Conclusions: These prediction models can be used to estimate chlorinated solvent exposure intensity for jobs reported by population-based case–control study participants that have sufficiently detailed information regarding the exposure determinants. PMID:20418277
Peters, Susan; Glass, Deborah C; Milne, Elizabeth; Fritschi, Lin
2014-03-01
Retrospective exposure assessment in community-based studies is largely reliant on questionnaire information. Expert assessment is often used to assess lifetime occupational exposures, but these assessments generally lack transparency and are very time-consuming. We explored the agreement between a rule-based assessment approach and case-by-case expert assessment of occupational exposures in a community-based study. We used data from a case-control study of childhood acute lymphoblastic leukaemia in which parental occupational exposures were originally assigned by expert assessment. Key questions were identified from the completed parent questionnaires and, on the basis of these, rules were written to assign exposure levels to diesel exhaust, pesticides and solvents. We estimated exposure prevalence separately for fathers and mothers, and used κ statistics to assess the agreement between the two exposure assessment methods. Exposures were assigned to 5829 jobs among 1079 men and 6189 jobs among 1234 women. For both sexes, agreement was good for the two assessment methods of exposure to diesel exhaust at a job level (κ=0.70 for men and κ=0.71 for women) and at a person level (κ=0.74 and κ=0.75). The agreement was good to excellent for pesticide exposure among men (κ=0.74 for jobs and κ=0.84 at a person level) and women (κ=0.68 and κ=0.71 at a job and person level, respectively). Moderate to good agreement was observed for assessment of solvent exposure, which was better for women than men. The rule-based assessment approach appeared to be an efficient alternative for assigning occupational exposures in a community-based study for a selection of occupational exposures.
2014-08-29
about exposure to spills of any kind, direct dermal exposure to jet fuel or solvent or other exposures such as cleaning fluids and smoking (if a smoker ...additives, may influence toxicity during exposure. JP-8 was found to be non -irritating in the rabbit primary eye irritation test (Smith et al...1981; Kinkead et al., 1992a). Results in the corresponding rabbit skin irritation test ranged from non -irritating (Smith et al., 1981; Wolfe et al
Application of liquid-liquid interactions with single-walled carbon nanotubes
NASA Astrophysics Data System (ADS)
Wang, Randy Kai-Wei
This study covers three important research topics related to the application of liquid-liquid interaction with single-walled carbon nanotubes (SWNTs). The first topic describes the removal of SWNT bundles from liquid suspensions of nanotubes. The key to this work includes the use of liquid-liquid interfaces to trap the SWNT bundles due to the free energy change of the system during the process. SWNTs pack into crystalline ropes that form bundles due to strong van der Waals attraction. Bundling diminishes mechanical and electronic properties because it could interrupt the electronic structure of the nanotubes. Also, the electronic devices based on as-grown nanotubes, which contains a mixture of individual nanotubes and nanotube bundles, make the electrical response unpredictable. We developed a new simple process to remove bundles by liquid-liquid interaction. SWNTs bundles are trapped at the interface because bundles stabilize the emulsions. Eliminating the use of ultracentrifugation to remove SWNT bundles enables large-scale production with reduced production costs and time savings. The second topic presented the swelling effect of the surfactant layer surrounding SWNTs with nonpolar solvents. Solvatochromic shifts in the absorbance and fluorescence spectra are observed when surfactant-stabilized aqueous SWNT suspensions are mixed with immiscible organic solvents. When aqueous surfactant-suspended SWNTs are mixed with certain solvents, the spectra closely match the peaks for SWNTs dispersed in only that solvent. These spectral changes suggest the hydrophobic region of the micelle surrounding SWNTs swells with the organic solvent when mixed. The solvatochromic shifts of the aqueous SWNT suspensions are reversible once the solvent evaporates. However, some surfactant-solvent systems show permanent changes to the fluorescence emission intensity after exposure to the organic solvent. The intensity of some large diameter SWNT (n, m) types increase by more than 175%. These differences are attributed to surfactant reorganization, which can improve nanotube coverage, resulting in decreased exposure to quenching mechanisms from the aqueous phase. The third topic describes the further study of the solvatochromism of the SWNTs. Since SWNTs are encapsulated with microenvironments of nonpolar solvents, it provides a new method to measure the photophysical properties of nanotubes in environments with known properties. Fluorescence and absorbance spectra of SWNTs show solvatochromic shifts in 16 nonpolar solvents, which are proportional to the solvent induction polarization. The photophysical properties of SWNTs were used to determine the relationship between the longitudinal polarizability and other nanotube properties, alpha11,|| ∝ 1/(R2E11 3). (Full text of this dissertation may be available via the University of Florida Libraries web site. Please check http://www.uflib.ufl.edu/etd.html)
Chiesa, Luca Maria; Labella, Giuseppe Federico; Panseri, Sara; Britti, Domenico; Galbiati, Fabrizio; Villa, Roberto; Arioli, Francesco
2017-05-01
The worldwide loss of honeybee colonies may be due to their exposure to several contaminants (i.e., pesticides); such contamination may also have impacts on consumers' health. Therefore, it is essential to develop quick and new methods to detect several pesticide residues in honey samples. In this study, the effectiveness of accelerated solvent extraction (ASE) was compared with QuEChERS methods for the analysis of 53 pesticides in organic honey by gas chromatography-triple quadrupole mass spectrometry. Two simple and rapid ASE methods with 'in-line' clean-up were optimised and then compared with QuEChERS. Hexane-ethyl acetate (Hex:EtAc) and Florisil were chosen as extraction solvent and retainer for the first ASE method respectively; acetonitrile and a primary-secondary amine phase (ACN-PSA) were selected for the second ASE method. The methods were validated according to the European Union SANTE/11945/2015 guidelines. The validation parameters showed that QuEChERS and ASE with PSA as retainer had better repeatability than ASE with Hex:EtAc and Florisil. In particular, QuEChERS and ASE (ACN-PSA) showed good recovery, according to the SANTE criteria, for the majority of investigated pesticides. Conversely, when ASE with Hex:EtAc and Florisil was used as the retainer, several compounds showed recoveries lower than the acceptable value of 70%. The ASE in-line method was finally applied to evaluate pesticide concentration in organic honey samples.
40 CFR 59.405 - Container labeling requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
...) Repeated (frequent) heavy abrasion, including mechanical wear and repeated (frequent) scrubbing with industrial solvents, cleansers, or scouring agents; or (v) Exterior exposure of metal structures and...
Method and means for dynamic measurement of rates of adsorption from solutions
Slomka, Bogdan J.; Buttermore, William H.
1992-05-05
A method and apparatus for dynamic measurement of rates of absorption from solutions. The method has the advantage of avoiding the use of solvent normally used to establish a baseline. The method involves pre-evacuating the adsorbent contained in an adsorbent cell and thereafter rapidly contacting the adsorbent with analytical solution, all without prior exposure of adsorbent to pure solvent. The result is a sharp characteristic adsorption line.
Compatibility of Halthane 88-3 urethane adhesive with the replacement cleaning solvent D-Limonene
DOE Office of Scientific and Technical Information (OSTI.GOV)
LeMay, J.D.; Mendoza, B.
1991-08-01
D-Limonene, (R)1-methyl-4-isopropenyl-1-cyclohexene, has been identified as a leading replacement for chlorinated solvents traditionally used to clean electrical assemblies and critical components in some phases of weapons production. Unfortunately, d-limonene has a much lower vapor pressure than the chlorinated solvents if replaces (<2 torr at ambient). This makes its complete elimination from cleaned subassemblies potentially difficult, and gives rise to concerns about the compatibility of d-limonene with materials in the warhead. During the past year many WR polymers and adhesives have been surveyed for their compatibility with d-limonene. Preliminary test results obtained at Sandia (Albuquerque) and Allied-Signal (KCD) showed that Aluminum/Halthanemore » 88-3/Aluminum joints were destroyed during exposure to saturated d-limonene vapor. The cause of bond failure appeared to be d-limonene induced swelling of the Halthane polymer. This report describes recent work performed at LLNL to study the swelling behavior and bond strength degradation of Halthane 88-3 resulting from exposure to d-limonene vapor.« less
Volume properties and spectroscopy: A terahertz Raman investigation of hen egg white lysozyme
NASA Astrophysics Data System (ADS)
Sassi, Paola; Perticaroli, Stefania; Comez, Lucia; Giugliarelli, Alessandra; Paolantoni, Marco; Fioretto, Daniele; Morresi, Assunta
2013-12-01
The low frequency depolarized Raman spectra of 100 mg/ml aqueous solutions of hen egg white lysozyme (HEWL) have been collected in the 25-85 °C range. Short and long exposures to high temperatures have been used to modulate the competition between the thermally induced reversible and irreversible denaturation processes. A peculiar temperature evolution of spectra is evidenced under prolonged exposure of the protein solution at temperatures higher than 65 °C. This result is connected to the self-assembling of polypeptide chains and testifies the sensitivity of the technique to the properties of both protein molecule and its surrounding. Solvent free spectra have been obtained after subtraction of elastic and solvent components and assigned to a genuine vibrational contribution of hydrated HEWL. A straight similarity is observed between the solvent-free THz Raman feature and the vibrational density of states as obtained by molecular dynamics simulations; according to this, we verify the relation between this spectroscopic observable and the effective protein volume, and distinguish the properties of this latter respect to those of the hydration shell in the pre-melting region.
Magnetic Properties and the Giant Magnetoimpedance of Amorphous Co-Based Wires with a Carbon Coating
NASA Astrophysics Data System (ADS)
Golubeva, E. V.; Stepanova, E. A.; Balymov, K. G.; Volchkov, S. O.; Kurlyandskaya, G. V.
2018-04-01
A comparative analysis of the magnetic properties and specific features of the giant magnetoimpedance has been carried out for amorphous rapidly quenched wires with a composition of (Co0.94Fe0.06)72.5Si12.5B15 in the initial state and after the deposition of a carbon coating. The deposition of the defective graphene-like carbon layer was carried out under normal conditions during the exposure in toluene (methylbenzene). The method of the energy-dispersive X-ray spectroscopy made it possible to reliably show that after the modification in toluene, the carbon content on the surface significantly exceeds the natural amount of carbon. The deposition of the carbon coating induced changes in the distribution of the initial quenching stresses in the near-surface layer of amorphous wires. A comparative analysis of the magnetic and magnetoimpedance properties of the samples before and after exposure in the aromatic solvent confirms the occurrence of changes in the effective magnetic anisotropy as a result of this surface treatment.
NASA Astrophysics Data System (ADS)
Gnabasik, Ryan; Haase, Rustin; Baruth, Andrew
2014-03-01
Despite its efficacy to produce well-ordered, periodic nanostructures, the intricate role multiple parameters play in solvent vapor annealing has not been fully established. In solvent vapor annealing a thin polymer film is exposed to the vapors of a solvent(s) thus forming a swollen and mobile layer to direct the self-assembly process at the nanoscale. Recent developments in both theory and experiment have directly identified critical parameters, but controlling them in any systematic way has proven non-trivial. These identified parameters include vapor pressure, solvent concentration in the film, and, critically, the solvent evaporation rate. To explore their role, a purpose-built solvent vapor annealing chamber was designed and constructed. The all-metal chamber is inert to solvent exposure and pneumatically actuated valves allow for precision timing in the introduction and withdrawal of solvent vapor. Furthermore, the mass flow controlled inlet, chamber pressure gauges, in situ spectral reflectance-based thickness monitoring, and high precision micrometer relief valve, give real-time monitoring and control during the annealing and evaporation phases. Using atomic force microscopy to image the annealed films, we are able to map out the parameter space for a series of polystyrene- b-polylactide (Mn = 75 kg/mol and fPLA = 0.28) block polymer thin films with an intrinsic cylindrical morphology and identify their role in directed assembly. Funded by Creighton University Summer Research Grant.
Lessons Learned from the On-Site Distillation of Used Solvents Generated by Health Care Facilities.
ERIC Educational Resources Information Center
Huang, Ching-San; Ciesla, John
1992-01-01
Discusses the sources of contaminants found in used solvents generated by the histopathological laboratories at health care facilities and the technical problems, corrective measures, and economic analysis associated with the on-site recycling and reusing of these solvents. An appendix contains an economic analysis for a used-solvent recycling…
Costa, Thiago Leiros; Barboni, Mirella Telles Salgueiro; Moura, Ana Laura de Araújo; Bonci, Daniela Maria Oliveira; Gualtieri, Mirella; de Lima Silveira, Luiz Carlos; Ventura, Dora Fix
2012-01-01
The purpose of this study was to evaluate the visual outcome of chronic occupational exposure to a mixture of organic solvents by measuring color discrimination, achromatic contrast sensitivity and visual fields in a group of gas station workers. We tested 25 workers (20 males) and 25 controls with no history of chronic exposure to solvents (10 males). All participants had normal ophthalmologic exams. Subjects had worked in gas stations on an average of 9.6±6.2 years. Color vision was evaluated with the Lanthony D15d and Cambridge Colour Test (CCT). Visual field assessment consisted of white-on-white 24–2 automatic perimetry (Humphrey II-750i). Contrast sensitivity was measured for sinusoidal gratings of 0.2, 0.5, 1.0, 2.0, 5.0, 10.0 and 20.0 cycles per degree (cpd). Results from both groups were compared using the Mann–Whitney U test. The number of errors in the D15d was higher for workers relative to controls (p<0.01). Their CCT color discrimination thresholds were elevated compared to the control group along the protan, deutan and tritan confusion axes (p<0.01), and their ellipse area and ellipticity were higher (p<0.01). Genetic analysis of subjects with very elevated color discrimination thresholds excluded congenital causes for the visual losses. Automated perimetry thresholds showed elevation in the 9°, 15° and 21° of eccentricity (p<0.01) and in MD and PSD indexes (p<0.01). Contrast sensitivity losses were found for all spatial frequencies measured (p<0.01) except for 0.5 cpd. Significant correlation was found between previous working years and deutan axis thresholds (rho = 0.59; p<0.05), indexes of the Lanthony D15d (rho = 0.52; p<0.05), perimetry results in the fovea (rho = −0.51; p<0.05) and at 3, 9 and 15 degrees of eccentricity (rho = −0.46; p<0.05). Extensive and diffuse visual changes were found, suggesting that specific occupational limits should be created. PMID:22916187
Testud, François; D'Amico, Andrea; Lambert-Chhum, Rachel; Garayt, Christelle; Descotes, Jacques
2010-11-01
A rational medical, occupational and toxicological approach is instrumental to select objectively among pregnant women exposed to chemicals at the workplace those who should be withdrawn or benefit from improvements of working conditions. Risk assessment is based on a comprehensive review of compounds' hazards and a thorough evaluation of the actual exposure including biomonitoring whenever as possible. Since 1996, the Lyon Poison Center has been conducting a prospective follow-up of pregnant women exposed to chemicals at the workplace. Of these, 206 exposed to organic solvents since conception were selected and matched with 206 exposed to a non-embryotoxic agent. Total withdrawal from the workplace was recommended in 22% of cases, but exposure was not considered to be hazardous to pregnancy in 51%. Overall, no increase in adverse outcomes was found. Maintaining pregnant women at their workplace, particularly most of the laboratory technicians, is reasonably possible after careful toxicological risk assessment. Copyright © 2010 Elsevier Inc. All rights reserved.
Occupational exposures and Parkinson's disease mortality in a prospective Dutch cohort.
Brouwer, Maartje; Koeman, Tom; van den Brandt, Piet A; Kromhout, Hans; Schouten, Leo J; Peters, Susan; Huss, Anke; Vermeulen, Roel
2015-06-01
We investigated the association between six occupational exposures (ie, pesticides, solvents, metals, diesel motor emissions (DME), extremely low frequency magnetic fields (ELF-MF) and electric shocks) and Parkinson's disease (PD) mortality in a large population-based prospective cohort study. The Netherlands Cohort Study on diet and cancer enrolled 58,279 men and 62,573 women aged 55-69 years in 1986. Participants were followed up for cause-specific mortality over 17.3 years, until December 2003, resulting in 402 male and 207 female PD deaths. Following a case-cohort design, a subcohort of 5,000 participants was randomly sampled from the complete cohort. Information on occupational history and potential confounders was collected at baseline. Job-exposure matrices were applied to assign occupational exposures. Associations with PD mortality were evaluated using Cox regression. Among men, elevated HRs were observed for exposure to pesticides (eg, ever high exposed, HR 1.27, 95% CI 0.86 to 1.88) and ever high exposed to ELF-MF (HR 1.54, 95% CI 1.00 to 2.36). No association with exposure duration or trend in cumulative exposure was observed for any of the occupational exposures. Results among women were unstable due to small numbers of high-exposed women. Associations with PD mortality were observed for occupational exposure to pesticides and ELF-MF. However, the weight given to these findings is limited by the absence of a monotonic trend with either duration or cumulative exposure. No associations were found between PD mortality and occupational exposure to solvents, metals, DME or electric shocks. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Yan, Cheing-Tong; Chien, Hai-Ying
2012-07-13
In this study, a simple and novel one-step hollow-fiber supported liquid-phase sampling (HF-LPS) technique was developed for enriched sampling of gaseous toxic species prior to chemical analysis for workplace air monitoring. A lab-made apparatus designed with a gaseous sample generator and a microdialysis sampling cavity (for HF-LPS) was utilized and evaluated to simulate gaseous contaminant air for occupational workplace analysis. Gaseous phenol was selected as the model toxic species. A polyethersulfone hollow fiber dialysis module filled with ethylene glycol in the shell-side was applied as the absorption solvent to collect phenol from a gas flow through the tube-side, based on the concentration distribution of phenol between the absorption solvent and the gas flow. After sampling, 20 μL of the extractant was analyzed by high performance liquid chromatography with ultraviolet detection (HPLC-UV). Factors that influence the generation of gaseous standards and the HF-LPS were studied thoroughly. Results indicated that at 25 °C the phenol (2000 μg/mL) standard solution injected at 15-μL/min can be vaporized into sampling cavity under nitrogen flow at 780 mL/min, to generate gaseous phenol with concentration approximate to twice the permissible exposure limit. Sampling at 37.3 mL/min for 30 min can meet the requirement of the workplace air monitoring. The phenol in air ranged between 0.7 and 10 cm³/m³ (shows excellent linearity) with recovery between 98.1 and 104.1%. The proposed method was identified as a one-step sampling for workplace monitoring with advantages of convenience, rapidity, sensitivity, and usage of less-toxic solvent. Copyright © 2012 Elsevier B.V. All rights reserved.
Choosing Polymer Solvents for Microlithography.
1987-07-24
of poly(methylmethacrylate) ( PMMA ) were spin coated on three-inch silicon wafers with a native oxide layer. The PMMA used was Formula 950K from KTI...exposure as measured by GPC are shown in Table 3. Viscosities of solutions containing 1% PMMA by weight were measured at 30 0C in an Ubbelohde viscometer...for each of the solvents studied. The PMMA used was first precipitated from a commercial 6% solution of PMMA (Mw-950K) in chlorobenzene obtained from
Proceedings of the 17th Conference on Toxicology Held in Dayton, Ohio on 3-5 November 1987
1989-09-01
mixtures often consist of solvents. One group of solvents that has been extensively studied for its neurotoxic properties has been the ketones. However...for workers. The purpose of this 40 research was to study a combination exposure from the same chemical group , test for possible neurobehavioral...2) comparable workers not using PGDN, and (3) an unrelated group of sailors involved in weapons guidance. The study period was from 1966 through
Method and means for dynamic measurement of rates of adsorption from solutions
Slomka, B.J.; Buttermore, W.H.
1992-05-05
A method and apparatus are described for the dynamic measurement of rates of absorption from solutions. The method has the advantage of avoiding the use of solvent normally used to establish a baseline. The method involves pre-evacuating the adsorbent contained in an adsorbent cell and thereafter rapidly contacting the adsorbent with analytical solution, all without prior exposure of adsorbent to pure solvent. The result is a sharp characteristic adsorption line. 5 figs.
Optically transparent/colorless polyimides
NASA Technical Reports Server (NTRS)
Stclair, A. K.; Stclair, T. L.; Slemp, W.; Ezzell, K. S.
1985-01-01
Several series of linear aromatic polyimide films have been synthesized and characterized with the objective of obtaining maximum optical transparency. Two approaches have been used as part of this structure-property relationship study. The first approach is to vary the molecular structure so as to separate chromophoric centers and reduce electronic interactions between polymer chains to lower the intensity of color in the resulting polymer films. A second and concurrent approach is to perform polymerizations with highly purified monomers. Glass transition temperatures of thermally cured polyimide films are obtained by thermomechanical analysis and thermal decomposition temperatures are determined by thermogravimetric analysis. Transmittance UV-visible spectra of the polyimide films are compared to that of a commercial polyimide film. Fully imidized films are tested for solubility in common organic solvents. The more transparent films prepared in this study are evaluated for use on second-surface mirror thermal control coating systems. Lightly colored to colorless films are characterized by UV-visible spectroscopy before and after exposure to 300 equivalent solar hours UV irradiation and varying doses of 1 MeV electron irradiation. The effects of monomer purity, casting solvent and cure atmosphere on polyimide film transparency are also investigated.
Mantovani, Cinthia de Carvalho; Silva, Jefferson Pereira E; Forster, Guilherme; Almeida, Rafael Menck de; Diniz, Edna Maria de Albuquerque; Yonamine, Mauricio
2018-02-01
Cannabis misuse during pregnancy is associated with severe impacts on the mother and baby health, such as newborn low birth weight, growth restriction, pre-term birth, neurobehavioral and developmental deficits. In most of the cases, drug abuse is omitted or denied by the mothers. Thus, toxicological analyzes using maternal-fetal matrices takes place as a suitable tool to assess drug use. Herein, meconium was the chosen matrix to evaluate cannabis exposure through identification and quantification of 11-nor-Δ9-tetrahydrocannabinol-9-carboxylic (THCCOOH). Accelerated solvent extraction (ASE) was applied for sample preparation technique to simultaneously extract and hydrolyze conjugated THCCOOH from meconium, followed by a solid-phase extraction (SPE) procedure. The method was developed and validated for gas chromatography-mass spectrometry (GC-MS), reaching hydrolysis efficiency of 98%. Limits of detection (LOD) and quantification (LOQ) were, respectively, 5 and 10 ng/g. The range of linearity was LOQ to 500 ng/g. Inter and intra-batch coefficients of variation were <8.4% for all concentration levels. Accuracy was in 101.7-108.9% range. Recovery was on average 60.3%. Carryover effect was not observed. The procedure was applied in six meconium samples from babies whose mothers were drug users and showed satisfactory performance to confirm fetal cannabis exposure. Copyright © 2018 Elsevier B.V. All rights reserved.
LeVan, Tricia D.; Koh, Woon-Puay; Lee, Hin-Peng; Koh, David; Yu, Mimi C.; London, Stephanie J.
2006-01-01
Occupational factors contribute to a significant fraction of respiratory disease and symptoms. We evaluated the role of occupational exposures on asthma, chronic bronchitis, and respiratory symptoms in a population-based cohort, the Singapore Chinese Health Study. History of occupations, occupational exposures, and respiratory conditions were collected by interviews with 52,325 Singaporeans born 1918–1953. Exposure to dusts, from cotton, wood, metal, mineral and/or asbestos, was associated with non-chronic cough and/or phlegm (OR = 1.19, 95% CI = 1.08, 1.30), chronic bronchitis (OR = 1.26, 95% CI = 1.01, 1.57) and adult-onset asthma (OR = 1.14, 95% CI = 1.00, 1.30). Cotton dust was the major component contributing to respiratory symptoms. Vapor exposure, from chemical solvents, dyes, cooling oils, paints, wood preservatives and/or pesticides, was associated with non-chronic cough or phlegm (OR = 1.14, 95% CI = 1.03, 1.27), chronic dry cough (OR = 1.55, 95% CI = 1.19, 2.01) and adult-onset asthma (OR = 1.34, 95% CI = 1.15, 1.56). Chemical solvents, cooling oils and pesticides were the major sources contributing to respiratory symptoms. These data support the role of occupational exposures in the etiology of respiratory illness in a population-based cohort in Singapore with a low prevalence of atopic illness. PMID:16707657
NASA Astrophysics Data System (ADS)
Carey, Christina; Cheng, Yuen-Kit; Rossky, Peter J.
2000-08-01
The concave substrate binding pocket of α-chymotrypsin binds specifically hydrophobic side chains. In order to understand the hydration structure present in the absence of substrate, and elucidate the character of the solvent displaced on binding, molecular dynamics computer simulation of the solvent in a fully hydrated protein has been carried out and analyzed. The pocket is found to be characterized in terms of a mixed polar and apolar macromolecular surface. It is shown that the simulated solvent structure within it is spatially consistent with that seen via crystallography. The solvent structure is energetically characterized by large losses in hydrogen bonding among solvent molecules except at the mouth of the pocket where exposure to bulk-like solvent is possible. The loss in hydrogen bonding is attributed to the highly constrained geometry available to the solvent, preventing formation of a hydrogen bonding network, with only partial compensation by interactions with the macromolecular surface. The solvent displacement concomitant with substrate binding will therefore be associated with a large enthalpic driving force. This result is at the extreme of a continuum of variable cases of "hydrophobic" hydration, which differ most basically in surface curvature. These range from convex solute surfaces, inducing clathrate-like structures, with negligible hydrogen bond loss, to flat surfaces with significant interfacial loss, to the present concave case with hydrogen bonding losses exceeding 50%.
Paule, A; Roubeix, V; Swerhone, G D W; Roy, J; Lauga, B; Duran, R; Delmas, F; Paul, E; Rols, J L; Lawrence, J R
2016-03-01
Residual pesticides applied to crops migrate from agricultural lands to surface and ground waters. River biofilms are the first aquatic non-target organisms which interact with pesticides. Therefore, ecotoxicological experiments were performed at laboratory scale under controlled conditions to investigate the community-level responses of river biofilms to a chloroacetanilide herbicide (alachlor) and organic solvent (methanol) exposure through the development referenced to control. Triplicate rotating annular bioreactors, inoculated with river water, were used to cultivate river biofilms under the influence of 1 and 10 μg L(-1) of alachlor and 25 mg L(-1) of methanol. For this purpose, functional (thymidine incorporation and carbon utilization spectra) and structural responses of microbial communities were assessed after 5 weeks of development. Structural aspects included biomass (chlorophyll a, confocal laser scanning microscopy) and composition (fluor-conjugated lectin binding, molecular fingerprinting, and diatom species composition). The addition of alachlor resulted in a significant reduction of bacterial biomass at 1 μg L(-1), whereas at 10 μg L(-1), it induced a significant reduction of exopolymer lectin binding, algal, bacterial, and cyanobacterial biomass. However, there were no changes in biofilm thickness or thymidine incorporation. No significant difference between the bacterial community structures of control and alachlor-treated biofilms was revealed by terminal restriction fragment length polymorphism (T-RFLP) analyses. However, the methanol-treated bacterial communities appeared different from control and alachlor-treated communities. Moreover, methanol treatment resulted in an increase of bacterial biomass and thymidine incorporation as well. Changes in dominant lectin binding suggested changes in the exopolymeric substances and community composition. Chlorophyll a and cyanobacterial biomass were also altered by methanol. This study suggested that the concentration-dependent effect of alachlor mainly remains limited to biomass and growth inhibition without apparent changes of structural and functional characteristics measured. Our work also establishes the potential toxic effects of organic solvents on river biofilm in ecotoxicological experiments. For the ecotoxicological experiments, the alternative of dissolution in organic solvent followed by its evaporation, depositing the chemical on a glass surface prior to dissolution in river water used here, appears to allow exposure while minimizing the effect of organic solvent.
Nonflammable, Nonaqueous, Low Atmospheric Impact, High Performance Cleaning Solvents
NASA Technical Reports Server (NTRS)
Dhooge, P. M.; Glass, S. M.; Nimitz, J. S.
2001-01-01
For many years, chlorofluorocarbon (CFC) and chlorocarbon solvents have played an important part in aerospace operations. These solvents found extensive use as cleaning and analysis (EPA) solvents in precision and critical cleaning. However, CFCs and chlorocarbon solvents have deleterious effects on the ozone layer, are relatively strong greenhouse gases, and some are suspect or known carcinogens. Because of their ozone-depletion potential (ODP), the Montreal Protocol and its amendments, as well as other environmental regulations, have resulted in the phaseout of CFC-113 and 1,1,1-trichloroethane (TCA). Although alternatives have been recommended, they do not perform as well as the original solvents. In addition, some analyses, such as the infrared analysis of extracted hydrocarbons, cannot be performed with the substitute solvents that contain C-H bonds. CFC-113 solvent has been used for many critical aerospace applications. CFC-113, also known as Freon (registered) TF, has been used extensively in NASA's cleaning facilities for precision and critical cleaning, in particular the final rinsing in Class 100 areas, with gas chromatography analysis of rinse residue. While some cleaning can be accomplished by other processes, there are certain critical applications where CFC-113 or a similar solvent is highly cost-effective and ensures safety. Oxygen system components are one example where a solvent compatible with oxygen and capable of removing fluorocarbon grease is needed. Electronic components and precision mechanical components can also be damaged by aggressive cleaning solvents.
2007-01-01
Krishnadasan, A., Kennedy, N., Morgenstern, H., Ritz , B. Estimated effects of solvents and mineral oils on cancer incidence and mortality in a cohort of...aerospace workers. Am J Ind Med 2005; 48: 249-58. 25. Carlton , GN and Smith, LB. Exposures to jet fuel and benzene during aircraft fuel tank repair in
Exposure assessment of workers in printed electronics workplace.
Lee, Ji Hyun; Sohn, Eun Kyung; Ahn, Jin Soo; Ahn, Kangho; Kim, Keun Soo; Lee, Jong Hwan; Lee, Taik Min; Yu, Il Je
2013-07-01
Printed electronics uses converging technologies, such as printing, fine mechanics, nanotechnology, electronics and other new technologies. Consequently, printed electronics raises additional health and safety concerns to those experienced in the traditional printing industry. This study investigated two printed electronics workplaces based on a walk-through survey and personal and area sampling. All the printed electronics operations were conducted in a cleanroom. No indication of exposure to excess silver nanoparticles or carbon nanotubes (CNTs) was found. While the organic solvents were lower than current occupational exposure limits, there was a lack of engineering controls, such as local exhaust ventilation, correct enclosure and duct connections. There was also an insufficient quantity of personal protective equipment, and some organic solvents not described in the safety data sheets (SDSs) were detected in the air samples. Plus, the cleaning work, a major emissions operation, was not conducted within a hood, and the cleaning waste was not properly disposed of. Therefore, the present exposure assessment results from two printed electronics workplaces suggest that the printed electronics industry needs to take note of the occupational safety and health risks and hazards already established by the traditional printing industry, along with new risks and hazards originating from converging technologies such as nanotechnology.
[Occupational exposure to methyl tert-butyl ether (MTBE) at an oil refinery].
Perbellini, L; Pasini, F; Prigioni, P; Rosina, A
2003-01-01
Methyl tert-butyl ether (MTBE) is widely used as an additive to gasoline, to increase oxygen content and reduce tailpipe emission of carbon monoxide. Our research dealt with 37 refinery workers in order to measure their occupational exposure to MTBE during two different seasonal periods. They provided blood and urine samples before and after a work shift during which they wore an active charcoal sampler for solvents. All samples were analysed by a gas-chromatograph equipped with a mass spectrometer detector. The concentration in air of MTBE was very low (median: 25 micrograms/m3 in spring and 5 micrograms/m3 in autumn). The blood and urine concentrations of MTBE at the end of the work shift were higher than those found before the shift. The increment in biological samples confirmed a small intake of MTBE by refinery workers: the biological monitoring of occupational exposure to this solvent yielded reliable results. Blood and urinary concentrations of MTBE obtained from workers split in relation to their smoking habit did not give a statistic significance to say that cigarette smoke is not a confusion factor in monitoring exposure to MTBE.
Solvent Hold Tank Sample Results for MCU-15-129-130-131: January 2015 Monthly Sample
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F. F.; Taylor-Pashow, K. M. L.
2015-02-19
SRNL received one set of SHT samples (MCU-15-129, MCU-15-130, and MCU-15-131), pulled on 01/25/2015 for analysis. The samples were combined and analyzed for composition. Analysis of the composite sample MCU-15-129-130-131 indicated low concentrations of the suppressor (TiDG), of the extractant (MaxCalix), and of the modifier (CS-7SB) in the solvent relative to their nominal values. This analysis confirms a downward trend of these components. No impurities were found in this solvent. The laboratory will continue to monitor the quality of the solvent in particular for any new impurity or degradation of the solvent components.
Development of an impact- and solvent-resistant thermoplastic composite matrix
NASA Technical Reports Server (NTRS)
Delano, C. B.; Kiskiras, C. J.
1984-01-01
Synthesis, moldability and chloroform, acetone and tricresyl phosphate resistance of 16 polymer compositions are described. These aliphatic heterocyclic polymers include polyimides, polybenzimidazoles, and N-arylenepolybenzimidazoles. A solution condensation (cresol) method to prepare imidized aliphaic polyimides is described. Two polyimides and one polybenzimidazole demonstrate no crazing or cracking during 500 hr exposure to the cited solvents under stress. Modification of one aliphatic polyimide with several aromatic amines suggests that m-phenylenediamine is singular in its behavior to improve the chloroform resistance of that class of polyimides.
[Evaluation of various renal function indices in a group of workers in the shoe industry].
Caudarella, R; Malavolta, N; Maccaferri, M; Raffi, G B; Boari, C
1981-05-26
The possible chronic nephrotoxicity of solvents has been investigated in a group of workers in the footwear industry. A number of indices of renal function were assessed in all subjects and a qualitative study of proteinuria carried out. The noted reduction in VFG would appear to be proportional to exposure doses. The other parameters, particularly the electrolytic balance, do not lend themselves to pathogenetic interpretations. The existence of a chronic nephrotoxicity of solvents cannot, however, be excluded.
Nitrile crosslinked polyphenyl-quinoxaline/graphite fiber composites
NASA Technical Reports Server (NTRS)
Alston, W. B.
1976-01-01
Studies were performed to reduce the 600 F thermoplasticity of polyphenylquinoxaline (PPQ) matrix resins by introducing crosslinking by the reaction of terminal nitrile groups. Seven solvents and solvent mixtures were studied as the crosslinking catalysts and used to fabricate crosslinked PPQ/HMS graphite fiber composites. The room temperature and 600 F composite mechanical properties after short time and prolonged 600 F air exposure and the 600 F composite weight loss were determined and compared to those properties of high molecular weight, linear PPQ/HMS graphite fiber composites.
NASA Astrophysics Data System (ADS)
Jin, Jun-Cheng; Tong, Wen-Quan; Fu, Ai-Yun; Xie, Cheng-Gen; Chang, Wen-Gui; Wu, Ju; Xu, Guang-Nian; Zhang, Ya-Nan; Li, Jun; Li, Yong; Yang, Peng-Qi
2015-05-01
Four unexpected 2D lanthanide coordination polymers have been synthesized through in situ reactions of DMF solvent under solvothermal conditions. The isostructural complexes 1-3 contain four types of 21 helical chains. While the Nd(III) ions are bridged through μ2-HIDC2- and oxalate to form a 2D sheet along the bc plane without helical character in 4. Therefore, complex 1 exhibits bright red solid-state phosphorescence upon exposure to UV radiation at room temperature.
Akhtar, Muhammad T; Mushtaq, Mian Y; Verpoorte, Robert; Richardson, Michael K; Choi, Young H
2016-01-01
Zebrafish is a frequently employed model organism in systems medicine and biomarker discovery. A crosscutting fundamental question, and one that has been overlooked in the field, is the "system-wide" (omics) effects induced in zebrafish by metabolic solvents and culture buffers. Indeed, any bioactivity or toxicity test requires that the target compounds are dissolved in an appropriate nonpolar solvent or aqueous media. It is important to know whether the solvent or the buffer itself has an effect on the zebrafish model organism. We evaluated the effects of two organic carrier solvents used in research with zebrafish, as well as in drug screening: dimethyl sulfoxide (DMSO) and ethanol, and two commonly used aqueous buffers (egg water and Hank's balanced salt solution). The effects of three concentrations (0.01, 0.1, and 1%) of DMSO and ethanol were tested in the 5-day-old zebrafish embryo using proton nuclear magnetic resonance ((1)H NMR) based metabolomics. DMSO (1% and 0.1%, but not 0.01%) exposure significantly decreased the levels of adenosine triphosphate (ATP), betaine, alanine, histidine, lactate, acetate, and creatine (p < 0.05). By contrast, ethanol exposure did not alter the embryos' metabolome at any concentration tested. The two different aqueous media noted above impacted the zebrafish embryo metabolome as evidenced by changes in valine, alanine, lactate, acetate, betaine, glycine, glutamate, adenosine triphosphate, and histidine. These results show that DMSO has greater effects on the embryo metabolome than ethanol, and thus is used with caution as a carrier solvent in zebrafish biomarker research and oral medicine. Moreover, the DMSO concentration should not be higher than 0.01%. Careful attention is also warranted for the use of the buffers egg water and Hank's balanced salt solution in zebrafish. In conclusion, as zebrafish is widely used as a model organism in life sciences, metabolome changes induced by solvents and culture buffers warrant further attention for robust systems science, and precision biomarkers that will stand the test of time.
Imaging local electric fields produced upon synchrotron X-ray exposure
Dettmar, Christopher M.; Newman, Justin A.; Toth, Scott J.; ...
2014-12-31
Electron–hole separation following hard X-ray absorption during diffraction analysis of soft materials under cryogenic conditions produces substantial local electric fields visualizable by second harmonic generation (SHG) microscopy. Monte Carlo simulations of X-ray photoelectron trajectories suggest the formation of substantial local electric fields in the regions adjacent to those exposed to X-rays, indicating a possible electric-field–induced SHG (EFISH) mechanism for generating the observed signal. In studies of amorphous vitreous solvents, analysis of the SHG spatial profiles following X-ray microbeam exposure was consistent with an EFISH mechanism. Within protein crystals, exposure to 12-keV (1.033-Å) X-rays resulted in increased SHG in the regionmore » extending ~3 μm beyond the borders of the X-ray beam. Moderate X-ray exposures typical of those used for crystal centering by raster scanning through an X-ray beam were sufficient to produce static electric fields easily detectable by SHG. The X-ray–induced SHG activity was observed with no measurable loss for longer than 2 wk while maintained under cryogenic conditions, but disappeared if annealed to room temperature for a few seconds. In conclusion, these results provide direct experimental observables capable of validating simulations of X-ray–induced damage within soft materials. Additionally, X-ray–induced local fields may potentially impact diffraction resolution through localized piezoelectric distortions of the lattice.« less
Piltingsrud, Harley V; Zimmer, Anthony T; Rourke, Aaron B
2003-08-01
During the summer of 1994, football players at a practice field reported noxious odors in the area. Ohio Environmental Protection Agency (OEPA) investigations of industries surrounding the field included a printing facility producing vinyl shower curtains with screen-printed designs. Though not the source of the odor, they were discharging volatile organic compounds directly to the environs in violation of OEPA regulations. To achieve compliance they installed a catalytic oxidizer for treating discharged air. Due to high equipment costs, the capacity of the installed catalytic oxidizer resulted in a substantial reduction in discharged air flow rates and increased solvent vapor concentrations within the workplace. Vapor levels caused worker discomfort, prompting a request for assistance from the Ohio Bureau of Workers Compensation. The vapor concentrations were found to exceed NIOSH, OSHA, and ACGIH acceptable exposure levels. The workers were then required to wear organic vapor removing respirators full-time while printing as a temporary protective measure. The company requested NIOSH assistance in finding methods to reduce solvent vapor concentrations. NIOSH studies included the identification of the sources and relative magnitude of solvent emissions from the printing process, the design of controls for the emissions, and the development of substitute inks using non-photochemically reactive solvents. The new ink system and controls allowed OEPA removal of the requirement for the treatment of discharged air and substantial increases in dilution ventilation. Increased ventilation would permit reduction in worker exposures to less than 1/3 mixture TLV levels and removal of requirements for respirator usage. This solution was the result of a comprehensive review of all facets of the problem, including OEPA regulations. It also required cooperative work between the company and federal, state, and local governmental agencies.
Mo, Kai-For; Heredia-Langner, Alejandro; Fraga, Carlos G
2017-03-01
In this study, an experimental design matrix was created and executed to test the effects of various real-world factors on the ability of (1) the accelerated diffusion sampler with solid phase micro-extraction (ADS-SPME) and (2) solvent extraction to capture organic chemical attribution signatures (CAS) from dimethyl methylphosphonate (DMMP) spiked onto painted wall board (PWB) surfaces. The DMMP CAS organic impurities sampled by ADS-SPME and solvent extraction were analyzed by gas chromatography/mass spectrometry (GC/MS). The number of detected DMMP CAS impurities and their respective GC/MS peak areas were determined as a function of DMMP stock, DMMP spiked volume, exposure time, SPME sampling time, and ADS headspace pressure. Based on the statistical analysis of experimental results, several general conclusions are made: (1) the amount of CAS impurity detected using ADS-SPME and GC/MS was most influenced by spiked volume, stock, and ADS headspace pressure, (2) reduced ADS headspace pressure increased the amount of detected CAS impurity, as measured by GC/MS peak area, by up to a factor of 1.7-1.9 compared to ADS at ambient headspace pressure, (3) the ADS had no measurable effect on the number of detected DMMP impurities, that is, ADS (with and without reduced pressure) had no practical effect on the DMMP impurity profile collected from spiked PWB, and (4) solvent extraction out performed ADS-SPME in terms of consistently capturing all or most of the targeted DMMP impurities from spiked PWB. Copyright © 2016 Elsevier B.V. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F.; Taylor-Pashow, K.
Savannah River National Laboratory (SRNL) received one set of Solvent Hold Tank (SHT) samples (MCU-15-556, MCU-15-557, and MCU-15-558), pulled on 03/16/2015 for analysis. The samples were combined and analyzed for composition. Analysis of the composite sample MCU-15-556-557-558 indicated a low concentration (~ 78 % of nominal) of the suppressor (TiDG) and concentrations of the extractant (MaxCalix), and of the modifier (CS-7SB) in the solvent that were slightly lower than nominal. This analysis confirms the addition of TiDG, MaxCalix, and modifier to the solvent in February 2015. Based on the current monthly sample, the levels of TiDG, MaxCalix, and modifier aremore » sufficient for continuing operation without adding a trim at this time. No impurities above the 1000 ppm level were found in this solvent by the Semi-Volatile Organic Analysis (SVOA). However, the p-nut vials that delivered the samples contained small (1 mm) droplets of oxidized modifier and amides (as detected by the FTIR analysis). In addition, up to 21 microgram of mercury per gram of solvent (or 17.4 µg/mL) was detected in this sample. The laboratory will continue to monitor the quality of the solvent in particular for any new impurities or degradation of the solvent components.« less
Colley, Valerie L; Casale, John F
2015-03-01
South American 'crack' cocaine, produced directly from coca leaf, can be distinguished from US domestically produced crack on the basis of occluded solvent profiles. In addition, analysis of domestically produced crack indicates the solvents that were used for cocaine hydrochloride (HCl) processing in South America. Samples of cocaine base (N=3) from South America and cocaine from the USA (N=157 base, N=88 HCl) were analyzed by headspace-gas chromatography-mass spectrometry (HS-GC-MS) to determine their solvent profiles. Each cocaine HCl sample was then converted to crack cocaine using the traditional crack production method and re-examined by HS-GC-MS. The resulting occluded solvent profiles were then compared to their original HCl solvent profiles. Analysis of the corresponding crack samples confirmed the same primary processing solvents found in the original HCl samples, but at reduced levels. Domestically seized crack samples also contained reduced levels of base-to-HCl conversion solvents. In contrast, analysis of South American crack samples confirmed the presence of low to high boiling hydrocarbons and no base-to-HCl conversion solvents. The presented study showed analysis of crack cocaine samples provides data on which processing solvents were originally utilized in the production of cocaine HCl in South America, prior to conversion to crack cocaine. Determination of processing solvents provides valuable information to the counter-drug intelligence community and assists the law enforcement community in determining cocaine distribution and trafficking routes throughout the world. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.
Skin Exposures & Effects in the Workplace
... they penetrate through the skin (i.e. pesticides, organic solvents). These chemicals enter the blood stream and ... additives, chemical intermediates), agrochemicals (i.e. pesticides and fertilizers), and commercial chemicals. Because the symptoms and presentation ...
Solvent hold tank sample results for MCU-16-1317-1318-1319. September 2016 monthly sample
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F. F.; Jones, D. H.
2017-01-01
Savannah River National Laboratory (SRNL) received one set of Solvent Hold Tank (SHT) samples (MCU-16-1317-1318-1319), pulled on 09/12/2016 for analysis. The samples were combined and analyzed for composition. Analysis of the composite sample MCU-16-1317-1318-1319 indicated the Isopar™L concentration is above its nominal level (102%). The extractant (MaxCalix) and the modifier (CS-7SB) are 5% and 10 % below their nominal concentrations. The suppressor (TiDG) is 77% below its nominal concentration. A summary of the concentration of the relevant solvent components is shown below. This analysis confirms the Isopar™ addition to the solvent in August. This analysis also indicates the solvent maymore » require the addition of TiDG, and possibly of modifier to restore them to nominal levels.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lindblad, M.S.; Keyes, B.; Gedvilas, L.
Fourier transform infrared (FTIR) spectroscopic imaging was used to study the initial diffusion of different solvents in cellulose acetate butyrate (CAB) films containing different amounts of acetyl and butyryl substituents. Different solvents and solvent/non-solvent mixtures were also studied. The FTIR imaging system allowed acquisition of sequential images of the CAB films as solvent penetration proceeded without disturbing the system. The interface between the non-swollen polymer and the initial swelling front could be identified using multivariate data analysis tools. For a series of ketone solvents the initial diffusion coefficients and diffusion rates could be quantified and were found to be relatedmore » to the polar and hydrogen interaction parameters in the Hansen solubility parameters of the solvents. For the solvent/non-solvent system the initial diffusion rate decreased less than linearly with the weight-percent of non-solvent present in the solution, which probably was due to the swelling characteristic of the non-solvent. For a given solvent, increasing the butyryl content of the CAB increased the initial diffusion rate. Increasing the butyryl content from 17 wt.% butyryl to 37 wt.% butyryl produced a considerably larger increase in initial diffusion rate compared to an increase in butyryl content from 37 wt.% to 50 wt.% butyryl.« less
The solvent component of macromolecular crystals
DOE Office of Scientific and Technical Information (OSTI.GOV)
Weichenberger, Christian X.; Afonine, Pavel V.; Kantardjieff, Katherine
2015-04-30
On average, the mother liquor or solvent and its constituents occupy about 50% of a macromolecular crystal. Ordered as well as disordered solvent components need to be accurately accounted for in modelling and refinement, often with considerable complexity. The mother liquor from which a biomolecular crystal is grown will contain water, buffer molecules, native ligands and cofactors, crystallization precipitants and additives, various metal ions, and often small-molecule ligands or inhibitors. On average, about half the volume of a biomolecular crystal consists of this mother liquor, whose components form the disordered bulk solvent. Its scattering contributions can be exploited in initialmore » phasing and must be included in crystal structure refinement as a bulk-solvent model. Concomitantly, distinct electron density originating from ordered solvent components must be correctly identified and represented as part of the atomic crystal structure model. Herein, are reviewed (i) probabilistic bulk-solvent content estimates, (ii) the use of bulk-solvent density modification in phase improvement, (iii) bulk-solvent models and refinement of bulk-solvent contributions and (iv) modelling and validation of ordered solvent constituents. A brief summary is provided of current tools for bulk-solvent analysis and refinement, as well as of modelling, refinement and analysis of ordered solvent components, including small-molecule ligands.« less
Toluene inducing acute respiratory failure in a spray paint sniffer.
Peralta, Diego P; Chang, Aymara Y
2012-01-01
Toluene, formerly known as toluol, is an aromatic hydrocarbon that is widely used as an industrial feedstock and as a solvent. Like other solvents, toluene is sometimes also used as an inhalant drug for its intoxicating properties. It has potential to cause multiple effects in the body including death. I report a case of a 27-year-old male, chronic spray paint sniffer, who presented with severe generalized muscle weakness and developed acute respiratory failure requiring ventilatory support. Toluene toxicity was confirmed with measurement of hippuric acid of 8.0 g/L (normal <5.0 g/L). Acute respiratory failure is a rare complication of chronic toluene exposure that may be lethal if it is not recognized immediately. To our knowledge, this is the second case of acute respiratory failure due to toluene exposure.
Toluene inducing acute respiratory failure in a spray paint sniffer
Peralta, Diego P.; Chang, Aymara Y.
2012-01-01
Summary Background: Toluene, formerly known as toluol, is an aromatic hydrocarbon that is widely used as an industrial feedstock and as a solvent. Like other solvents, toluene is sometimes also used as an inhalant drug for its intoxicating properties. It has potential to cause multiple effects in the body including death. Case Report: I report a case of a 27-year-old male, chronic spray paint sniffer, who presented with severe generalized muscle weakness and developed acute respiratory failure requiring ventilatory support. Toluene toxicity was confirmed with measurement of hippuric acid of 8.0 g/L (normal <5.0 g/L). Conclusions: Acute respiratory failure is a rare complication of chronic toluene exposure that may be lethal if it is not recognized immediately. To our knowledge, this is the second case of acute respiratory failure due to toluene exposure. PMID:23569498
2,5-Hexanedione excretion after occupational exposure to n-hexane.
Ahonen, I; Schimberg, R W
1988-01-01
The urinary excretion of the n-hexane metabolite 2,5-hexanedione (HD) was determined in four shoe factory workers during four workingdays that were preceded by four free days and followed by two free days. The correlation between excretion of HD and the n-hexane concentrations in the workroom air was evaluated. The air concentrations of n-hexane and those of acetone, toluene, and other organic solvents were monitored with charcoal tubes. All the urine from each worker was collected at freely chosen intervals during the experimental period and the following two free days. The samples were analysed by gas chromatography. The relative excretion of HD increased as the exposure to n-hexane increased, although it seemed that HD accumulated progressively in the body at the highest n-hexane concentrations and at higher total solvent concentrations. Images PMID:3342196
Regulation of priority carcinogens and reproductive or developmental toxicants
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hooper, K.; LaDou, J.; Rosenbaum, J.S.
In California, 370 carcinogens and 112 reproductive/developmental toxicants have been identified as a result of the State's Safe Drinking Water and Toxic Enforcement Act of 1986. They include pesticides, solvents, metals, industrial intermediates, environmental mixtures, and reactive agents. Occupational, environmental, and consumer product exposures that involve these agents are regulated under the Act. At levels of concern, businesses must provide warnings for and limit discharges of those chemicals. The lists of chemicals were compiled following systematic review of published data, including technical reports from the U.S. Public Health Service--National Toxicology Program (NTP), and evaluation of recommendations from authoritative bodies suchmore » as the International Agency for Research on Cancer (IARC) and the U.S. Environmental Protection Agency (USEPA). Given the large number of chemicals that are carcinogens or reproductive/developmental toxicants, regulatory concerns should focus on those that have high potential for human exposure, e.g., widely distributed or easily absorbed solvents, metals, environmental mixtures, or reactive agents. In this paper, we present a list of 33 potential priority carcinogens and reproductive/developmental toxicants, including alcoholic beverages, asbestos, benzene, chlorinated solvents, formaldehyde, glycol ethers, lead, tobacco smoke, and toluene.« less
Regulation of priority carcinogens and reproductive or developmental toxicants.
Hooper, K; LaDou, J; Rosenbaum, J S; Book, S A
1992-01-01
In California, 370 carcinogens and 112 reproductive/developmental toxicants have been identified as a result of the State's Safe Drinking Water and Toxic Enforcement Act of 1986. They include pesticides, solvents, metals, industrial intermediates, environmental mixtures, and reactive agents. Occupational, environmental, and consumer product exposures that involve these agents are regulated under the Act. At levels of concern, businesses must provide warnings for and limit discharges of those chemicals. The lists of chemicals were compiled following systematic review of published data, including technical reports from the U.S. Public Health Service--National Toxicology Program (NTP), and evaluation of recommendations from authoritative bodies such as the International Agency for Research on Cancer (IARC) and the U.S. Environmental Protection Agency (USEPA). Given the large number of chemicals that are carcinogens or reproductive/developmental toxicants, regulatory concerns should focus on those that have high potential for human exposure, e.g., widely distributed or easily absorbed solvents, metals, environmental mixtures, or reactive agents. In this paper, we present a list of 33 potential priority carcinogens and reproductive/developmental toxicants, including alcoholic beverages, asbestos, benzene, chlorinated solvents, formaldehyde, glycol ethers, lead, tobacco smoke, and toluene.
NASA Astrophysics Data System (ADS)
Yi, Qinhua; Chen, Jianfeng; Le, Yuan; Wang, Jiexin; Xue, Chunyu; Zhao, Hong
2013-06-01
Dirithromycin (DIR) was crystallized from acetone solvent in the form of an acetone solvate. Its crystal structure belongs to monoclinic, space group P21, with the unit cell parameters a=14.688(3) Å, b=11.6120(12) Å, c=14.9129(12) Å, β=94.794(10)°, and Z=2. Results of X-ray diffraction (XRD) and thermogravimetry-differential scanning calorimetry (TG-DSC) indicated that the solvent molecules could enter the crystal lattice and thus the solvate is formed. The molecular dynamics (MD) simulation method was applied to study the solvent effect. It revealed that the relative growth rates of the main crystal habit faces changed a lot, which made the most morphologically important habit face shift from (001) face to (100) face due to polar groups or atoms exposure and hence a large solvent interaction. The prism habit predicted by a modified attachment energy (AE) model agreed well with the observed experimental morphology grown from the acetone solution. This prediction method may help for a solvent selection to improve the morphology in the drug crystallization process.
Solventless pharmaceutical coating processes: a review.
Bose, Sagarika; Bogner, Robin H
2007-01-01
Coatings are an essential part in the formulation of pharmaceutical dosage form to achieve superior aesthetic quality (e.g., color, texture, mouth feel, and taste masking), physical and chemical protection for the drugs in the dosage forms, and modification of drug release characteristics. Most film coatings are applied as aqueous- or organic-based polymer solutions. Both organic and aqueous film coating bring their own disadvantages. Solventless coating technologies can overcome many of the disadvantages associated with the use of solvents (e.g., solvent exposure, solvent disposal, and residual solvent in product) in pharmaceutical coating. Solventless processing reduces the overall cost by eliminating the tedious and expensive processes of solvent disposal/treatment. In addition, it can significantly reduce the processing time because there is no drying/evaporation step. These environment-friendly processes are performed without any heat in most cases (except hot-melt coating) and thus can provide an alternative technology to coat temperature-sensitive drugs. This review discusses and compares six solventless coating methods - compression coating, hot-melt coating, supercritical fluid spray coating, electrostatic coating, dry powder coating, and photocurable coating - that can be used to coat the pharmaceutical dosage forms.
Jiang, Ping; Lucy, Charles A
2015-10-15
Electrospray ionization mass spectrometry (ESI-MS) has significantly impacted the analysis of complex biological and petroleum samples. However ESI-MS has limited ionization efficiency for samples in low dielectric and low polarity solvents. Addition of a make-up solvent through a T union or electrospray solvent through continuous flow extractive desorption electrospray ionization (CF-EDESI) enable ionization of analytes in non-ESI friendly solvents. A conventional make-up solvent addition setup was used and a CF-EDESI source was built for ionization of nitrogen-containing standards in hexane or hexane/isopropanol. Factors affecting the performance of both sources have been investigated and optimized. Both the make-up solvent addition and CF-EDESI improve the ionization efficiency for heteroatom compounds in non-ESI friendly solvents. Make-up solvent addition provides higher ionization efficiency than CF-EDESI. Neither the make-up solvent addition nor the CF-EDESI eliminates ionization suppression of nitrogen-containing compounds caused by compounds of the same chemical class. Copyright © 2015 Elsevier B.V. All rights reserved.
Brain tumors in children and occupational exposure of parents.
Peters, F M; Preston-Martin, S; Yu, M C
1981-07-10
Ninety-two cases of brain tumor in children less than 10 years old were compared with 92 matched controls for parental occupational history. Cases were more likely than controls to show material occupations involving chemical exposure, paternal occupations involving solvents, and employment of father in the aircraft industry. These three factors were not affected by adjustment for the potential confounding variables examined in this study.
Seafood is one of the largest sources of dietary arsenic exposure. Because most of the arsenic present is non-toxic (such as arsenobetaine [AsB]), the consumption of seafood is thought to result in a low risk or non-toxic exposure. This can be misleading for two reasons. First...
Feng, Yanli; Mu, Cuicui; Zhai, Jinqing; Li, Jian; Zou, Ting
2010-11-15
Carbonyl compounds including their concentrations, potential sources, diurnal variations and personal exposure were investigated in six subway stations and in-subway trains in Shanghai in June 2008. The carbonyls were collected onto solid sorbent (Tenax TA) coated with pentafluorophenyl hydrazine (PFPH), followed by solvent extraction and gas chromatography (GC)/mass spectrometry (MS) analysis of the PFPH derivatives. The total carbonyl concentrations of in-subway train were about 1.4-2.5 times lower than in-subway stations. A significant correlation (R>0.5, p<0.01) between the concentrations of the low molecular-weight carbonyl compounds (
Occupational exposure and laryngeal and hypopharyngeal cancer risk in central and eastern Europe
DOE Office of Scientific and Technical Information (OSTI.GOV)
Shangina, O.; Brennan, P.; Szeszenia-Dabrowska, N.
2006-08-15
A multicenter case-control study was conducted during 1999-2002 in four European countries (Poland, Romania, Russia, and Slovakia) to evaluate the role of occupational exposures in risk of laryngeal/hypopharyngeal cancer. Male cancer cases (34 hypopharyngeal, 316 laryngeal) with full data on occupational history and nonoccupational factors were compared with 728 hospital controls for occupational exposure to 73 suspected carcinogens. Occupational history was evaluated by industrial hygienists blinded to case/control status. Elevated risks for over exposure to coal dust were found for both hypopharyngeal (odds ratio (OR) = 4.19, 95% confidence interval (CI): 1.18, 14.89) and laryngeal (OR = 1.81, 95% CI:more » 0.94, 3.47) cancer, with clear dose-response patterns. Inclusion of a 20-year lag in the analysis strengthened these associations. Hypopharyngeal cancer risk was also significantly associated with exposure to mild steel dust (OR = 3.04, 95% CI: 1.39, 6.64) and iron compounds and fumes (OR = 2.74, 95% CI: 1.29, 5.84), without clear dose-response relations. Laryngeal cancer was significantly associated with exposure to hard-alloys dust (OR = 2.23, 95% CI: 1.08, 4.57) and chlorinated solvents (OR = 2.18, 95% CI: 1.03, 4.61), without dose-response relations. A possible link between high formaldehyde exposure and laryngeal cancer was suggested. These data indicate that occupational exposure to coal dust may play a role in laryngeal and hypopharyngeal cancer. Other possible relations need further evaluation.« less
Mikoczy, Z; Schütz, A; Strömberg, U; Hagmar, L
1996-01-01
OBJECTIVE--To study the effect on the incidence of cancer of exposure to chemicals handled in the leather tanning industry. MATERIALS AND METHODS--A case-control study was performed within a cohort of 2487 workers employed for at least six months during the period 1900-89 in three Swedish leather tanneries. 68 cancer cases (lung, stomach, bladder, kidney, nasal, and pancreatic cancers and soft tissue sarcomas) and 178 matched controls were studied. Effects of chemical exposures on cancer incidence, adjusted for age at risk, sex, and plant were estimated with a conditional logistic regression model. RESULTS--A significant association was found between exposure to leather dust and pancreatic cancer (odds ratio (OR) 7.19, 95% confidence interval (95% CI) 1.44 to 35-89). An association was indicated between leather dust from vegetable tanning and lung cancer. After adjustment for smoking habits a tentative association between organic solvents and lung cancer lost its significance. No association was found between exposure to chlorophenols and soft tissue sarcomas. CONCLUSIONS--The significant association between leather tanning and soft tissue sarcomas that was found in our previous cohort analysis could not be explained by exposure to chlorophenols. On the other hand a significant association was found between exposure to leather dust and pancreatic cancer, and exposure to leather dust from vegetable tanning was often present in cases with lung cancer. Due to the small numbers of cases, the results can, however, only lead to tentative conclusions. PMID:8704870
Analysis of biomolecular solvation sites by 3D-RISM theory.
Sindhikara, Daniel J; Hirata, Fumio
2013-06-06
We derive, implement, and apply equilibrium solvation site analysis for biomolecules. Our method utilizes 3D-RISM calculations to quickly obtain equilibrium solvent distributions without either necessity of simulation or limits of solvent sampling. Our analysis of these distributions extracts highest likelihood poses of solvent as well as localized entropies, enthalpies, and solvation free energies. We demonstrate our method on a structure of HIV-1 protease where excellent structural and thermodynamic data are available for comparison. Our results, obtained within minutes, show systematic agreement with available experimental data. Further, our results are in good agreement with established simulation-based solvent analysis methods. This method can be used not only for visual analysis of active site solvation but also for virtual screening methods and experimental refinement.
Boeing, Joana Schuelter; Barizão, Erica Oliveira; E Silva, Beatriz Costa; Montanher, Paula Fernandes; de Cinque Almeida, Vitor; Visentainer, Jesuí Vergilio
2014-01-01
This study evaluated the effect of the solvent on the extraction of antioxidant compounds from black mulberry (Morus nigra), blackberry (Rubus ulmifolius) and strawberry (Fragaria x ananassa). Different extracts of each berry were evaluated from the determination of total phenolic content, anthocyanin content and antioxidant capacity, and data were applied to the principal component analysis (PCA) to gain an overview of the effect of the solvent in extraction method. For all the berries analyzed, acetone/water (70/30, v/v) solvent mixture was more efficient solvent in the extracting of phenolic compounds, and methanol/water/acetic acid (70/29.5/0.5, v/v/v) showed the best values for anthocyanin content. Mixtures of ethanol/water (50/50, v/v), acetone water/acetic acid (70/29.5/0.5, v/v/v) and acetone/water (50/50, v/v) presented the highest antioxidant capacities for black mulberries, blackberries and strawberries, respectively. Antioxidants extractions are extremely affected by the solvent combination used. In addition, the obtained extracts with the organic solvent-water mixtures were distinguished from the extracts obtained with pure organic solvents, through the PCA analysis.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ferrell, Jack R; Ware, Anne E
Two catalytic fast pyrolysis (CFP) oils (bottom/heavy fraction) were analyzed in various solvents that are used in common analytical methods (nuclear magnetic resonance - NMR, gas chromatography - GC, gel permeation chromatography - GPC, thermogravimetric analysis - TGA) for oil characterization and speciation. A more accurate analysis of the CFP oils can be obtained by identification and exploitation of solvent miscibility characteristics. Acetone and tetrahydrofuran can be used to completely solubilize CFP oils for analysis by GC and tetrahydrofuran can be used for traditional organic GPC analysis of the oils. DMSO-d6 can be used to solubilize CFP oils for analysismore » by 13C NMR. The fractionation of oils into solvents that did not completely solubilize the whole oils showed that miscibility can be related to the oil properties. This allows for solvent selection based on physico-chemical properties of the oils. However, based on semi-quantitative comparisons of the GC chromatograms, the organic solvent fractionation schemes did not speciate the oils based on specific analyte type. On the other hand, chlorinated solvents did fractionate the oils based on analyte size to a certain degree. Unfortunately, like raw pyrolysis oil, the matrix of the CFP oils is complicated and is not amenable to simple liquid-liquid extraction (LLE) or solvent fractionation to separate the oils based on the chemical and/or physical properties of individual components. For reliable analyses, for each analytical method used, it is critical that the bio-oil sample is both completely soluble and also not likely to react with the chosen solvent. The adoption of the standardized solvent selection protocols presented here will allow for greater reproducibility of analysis across different users and facilities.« less
Use of history science methods in exposure assessment for occupational health studies
Johansen, K; Tinnerberg, H; Lynge, E
2005-01-01
Aims: To show the power of history science methods for exposure assessment in occupational health studies, using the dry cleaning industry in Denmark around 1970 as the example. Methods: Exposure data and other information on exposure status were searched for in unconventional data sources such as the Danish National Archives, the Danish Royal Library, archives of Statistics Denmark, the National Institute of Occupational Health, Denmark, and the Danish Labor Inspection Agency. Individual census forms were retrieved from the Danish National Archives. Results: It was estimated that in total 3267 persons worked in the dry cleaning industry in Denmark in 1970. They typically worked in small shops with an average size of 3.5 persons. Of these, 2645 persons were considered exposed to solvents as they were dry cleaners or worked very close to the dry cleaning process, while 622 persons were office workers, drivers, etc in shops with 10 or more persons. It was estimated that tetrachloroethylene constituted 85% of the dry cleaning solvent used, and that a shop would normally have two machines using 4.6 tons of tetrachloroethylene annually. Conclusion: The history science methods, including retrieval of material from the Danish National Archives and a thorough search in the Royal Library for publications on dry cleaning, turned out to be a very fruitful approach for collection of exposure data on dry cleaning work in Denmark. The history science methods proved to be a useful supplement to the exposure assessment methods normally applied in epidemiological studies. PMID:15961618
Use of history science methods in exposure assessment for occupational health studies.
Johansen, K; Tinnerberg, H; Lynge, E
2005-07-01
To show the power of history science methods for exposure assessment in occupational health studies, using the dry cleaning industry in Denmark around 1970 as the example. Exposure data and other information on exposure status were searched for in unconventional data sources such as the Danish National Archives, the Danish Royal Library, archives of Statistics Denmark, the National Institute of Occupational Health, Denmark, and the Danish Labor Inspection Agency. Individual census forms were retrieved from the Danish National Archives. It was estimated that in total 3267 persons worked in the dry cleaning industry in Denmark in 1970. They typically worked in small shops with an average size of 3.5 persons. Of these, 2645 persons were considered exposed to solvents as they were dry cleaners or worked very close to the dry cleaning process, while 622 persons were office workers, drivers, etc in shops with 10 or more persons. It was estimated that tetrachloroethylene constituted 85% of the dry cleaning solvent used, and that a shop would normally have two machines using 4.6 tons of tetrachloroethylene annually. The history science methods, including retrieval of material from the Danish National Archives and a thorough search in the Royal Library for publications on dry cleaning, turned out to be a very fruitful approach for collection of exposure data on dry cleaning work in Denmark. The history science methods proved to be a useful supplement to the exposure assessment methods normally applied in epidemiological studies.
Effects of concurrent noise and jet fuel exposure on hearing loss.
Kaufman, Laura R; LeMasters, Grace K; Olsen, Donna M; Succop, Paul
2005-03-01
We sought to examine the effects of occupational exposure to jet fuel on hearing in military workers. Noise-exposed subjects, with or without jet fuel exposure, underwent hearing tests. Work histories, recreational exposures, protective equipment, medical histories, alcohol, smoking, and demographics were collected by questionnaire. Jet fuel, solvent, and noise exposure data were collected from records. Fuel exposure estimates were less than 34% of the OSHA Threshold Limit Values. Subjects with 3 years of jet fuel exposure had a 70% increase in adjusted odds of hearing loss (OR = 1.7; 95% CI = 1.14-2.53) and the odds increased to 2.41 (95% CI = 1.04-5.57) for 12 years of noise and fuel exposure. These findings suggest that jet fuel has a toxic affect on the auditory system.
Long-term health experience of jet engine manufacturing workers: VII: occupational exposures.
Kennedy, Kathleen J; Esmen, Nurtan A; Hancock, Roger P; Lacey, Steven E; Marsh, Gary M; Buchanich, Jeanine M; Youk, Ada O
2013-06-01
To reconstruct agent-specific occupational exposures for a cohort of jet engine manufacturing workers for use in an epidemiological mortality study. Potential chemical and physical exposures at eight jet engine manufacturing and overhaul/repair plants were evaluated for the period 1952 to 2001. Eleven agents were selected for detailed examination, and a job-exposure matrix was constructed. Quantitative exposure estimates were generated for metalworking fluids, nickel, cobalt, chromium, solvents, and incomplete combustion aerosol from metalworking fluids. Qualitative exposure estimates were assigned for ionizing radiation, electromagnetic fields, polychlorinated biphenyls, and lead-cadmium. All exposures showed decreasing trends over the study period. The quantitative exposure levels generated in this study were lower than early contemporaneous professional practice recommendations and were similar to or lower than published data from other industries.
Solvent Hold Tank Sample Results For MCU-15-750-751-752-: June Monthly Sample
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F.; Taylor-Pashow, K.
2015-10-07
Savannah River National Laboratory (SRNL) received one set of Solvent Hold Tank (SHT) samples (MCU-15-750, MCU-15-751, and MCU-15-752), pulled on 06/22/2015 for analysis. The samples were combined and analyzed for composition. Analysis of the composite sample MCU-15-750-751-752 indicated a low concentration (~ 49 % of nominal) of the suppressor (TiDG) and slightly lower than nominal concentrations of the extractant (MaxCalix), and of the modifier (Cs-7SB) in the solvent. This analysis confirms the addition of TiDG, MaxCalix, and modifier to the solvent in February 2015. Based on the current monthly sample, the levels of TiDG, MaxCalix, and modifier are sufficient formore » continuing operation without adding a trim at this time but it is recommended that an addition of TiDG, modifier and Isopar™L should be made in the near future. No impurities above the 1000 ppm level were found in this solvent by the Semi-Volatile Organic Analysis (SVOA). No impurities were observed in the Hydrogen Nuclear Magnetic Resonance (HNMR). In addition, up to 13.9 micrograms of mercury per gram of solvent (or 11.5 µg/mL) was detected in this sample. The laboratory will continue to monitor the quality of the solvent in particular for any new impurities or degradation of the solvent components.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tatiana G. Levitskaia; James M. Peterson; Emily L. Campbell
2013-12-01
In liquid–liquid extraction separation processes, accumulation of organic solvent degradation products is detrimental to the process robustness, and frequent solvent analysis is warranted. Our research explores the feasibility of online monitoring of the organic solvents relevant to used nuclear fuel reprocessing. This paper describes the first phase of developing a system for monitoring the tributyl phosphate (TBP)/n-dodecane solvent commonly used to separate used nuclear fuel. In this investigation, the effect of extraction of nitric acid from aqueous solutions of variable concentrations on the quantification of TBP and its major degradation product dibutylphosphoric acid (HDBP) was assessed. Fourier transform infrared (FTIR)more » spectroscopy was used to discriminate between HDBP and TBP in the nitric acid-containing TBP/n-dodecane solvent. Multivariate analysis of the spectral data facilitated the development of regression models for HDBP and TBP quantification in real time, enabling online implementation of the monitoring system. The predictive regression models were validated using TBP/n-dodecane solvent samples subjected to high-dose external ?-irradiation. The predictive models were translated to flow conditions using a hollow fiber FTIR probe installed in a centrifugal contactor extraction apparatus, demonstrating the applicability of the FTIR technique coupled with multivariate analysis for the online monitoring of the organic solvent degradation products.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Levitskaia, Tatiana G.; Peterson, James M.; Campbell, Emily L.
2013-11-05
In liquid-liquid extraction separation processes, accumulation of organic solvent degradation products is detrimental to the process robustness and frequent solvent analysis is warranted. Our research explores feasibility of online monitoring of the organic solvents relevant to used nuclear fuel reprocessing. This paper describes the first phase of developing a system for monitoring the tributyl phosphate (TBP)/n-dodecane solvent commonly used to separate used nuclear fuel. In this investigation, the effect of extraction of nitric acid from aqueous solutions of variable concentrations on the quantification of TBP and its major degradation product dibutyl phosphoric acid (HDBP) was assessed. Fourier Transform Infrared Spectroscopymore » (FTIR) spectroscopy was used to discriminate between HDBP and TBP in the nitric acid-containing TBP/n-dodecane solvent. Multivariate analysis of the spectral data facilitated the development of regression models for HDBP and TBP quantification in real time, enabling online implementation of the monitoring system. The predictive regression models were validated using TBP/n-dodecane solvent samples subjected to the high dose external gamma irradiation. The predictive models were translated to flow conditions using a hollow fiber FTIR probe installed in a centrifugal contactor extraction apparatus demonstrating the applicability of the FTIR technique coupled with multivariate analysis for the online monitoring of the organic solvent degradation products.« less
EFFICIENT CHEMICAL SYNTHESIS USING MICROWAVES
Synthetic organic transformations performed under non-traditional conditions are becoming popular primarily to circumvent the growing environmental concerns. A solvent-free approach that involves microwave (MW) exposure of neat reactants catalyzed by the surfaces of less-expensiv...
NASA Astrophysics Data System (ADS)
Netsou, Asteriona-Maria; Thupakula, Umamahesh; Debehets, Jolien; Chen, Taishi; Hirsch, Brandon; Volodin, Alexander; Li, Zhe; Song, Fengqi; Seo, Jin Won; De Feyter, Steven; Schouteden, Koen; Van Haesendonck, Chris
2017-08-01
We investigated the topological insulator (TI) Bi2Te3 in four different environments (ambient, ultra-high vacuum (UHV), nitrogen gas and organic solvent environment) using scanning probe microscopy (SPM) techniques. Upon prolonged exposure to ambient conditions and organic solvent environments the cleaved surface of the pristine Bi2Te3 is observed to be strongly modified during SPM measurements, while imaging of freshly cleaved Bi2Te3 in UHV and nitrogen gas shows considerably less changes of the Bi2Te3 surface. We conclude that the reduced surface stability upon exposure to ambient conditions is triggered by adsorption of molecular species from ambient, including H2O, CO2, etc which is verified by Auger electron spectroscopy. Our findings of the drastic impact of exposure to ambient on the Bi2Te3 surface are crucial for further in-depth studies of the intrinsic properties of the TI Bi2Te3 and for potential applications that include room temperature TI based devices operated under ambient conditions.
Dermal absorption and urinary elimination of N-methyl-2-pyrrolidone.
Bader, Michael; Keener, Stephen A; Wrbitzky, Renate
2005-09-01
The dermal absorption of the solvent N-methyl-2-pyrrolidone (NMP) and its elimination in urine was investigated in an experimental study. Seven volunteers were exposed to 1045 mg of liquid NMP under occlusive conditions for 2 h. Urine was collected before, during and up to 72 h after the exposure and analysed for NMP by GC/MS after liquid-liquid extraction. Additionally, the remaining NMP in the pads was determined to estimate the total dermal uptake. The concentration of NMP in urine increased rapidly after beginning of the exposure up to 1 h after the exposure was completed. A peak concentration of 1,836+/-863 microg/l was observed, the half-life in urine was 3.2 h. About 0.5% of the absorbed dose was excreted metabolically unchanged. An average dermal absorption of 5.5 mg cm(-2) h(-1) was calculated. The results of this study show that the percutaneous absorption of NMP may contribute significantly to the overall uptake of the solvent, e.g. in the workplace. Therefore, a biological monitoring of NMP exposed workers is essential for occupational-medical surveillance.
Children's agricultural health: traumatic injuries and hazardous inorganic exposures.
Perry, Melissa J
2003-01-01
Farming is one of the most hazardous occupational industries in the USA, and farms pose numerous health risks for youth visiting, living in, or working in the farm environment. This review discusses both potential traumatic injuries and hazardous inorganic exposures that are common in agricultural settings. An estimated 2 million youth under the age of 20 currently live or work on US farms. Approximately 103 farm fatalities occur in this age group each year; over 32,000 nonfatal youth injuries occurred on farms in 1998. Children working in US agriculture make up only 8% of the population of working minors overall, yet they account for 40% of work-related fatalities among minors. Farm children and youth are also exposed to potentially harmful chemicals, such as pesticides and solvents, and many of these exposures go undetected. The long-term health effects of exposure to pesticides or solvents are not known, but the developmental vulnerabilities of children and youth are of particular concern. Clinical and epidemiologic research in pediatric populations is needed to expand the empirical data, particularly for inorganic and organic exposures, musculoskeletal trauma, skin disorders, occupation-induced hearing loss, and psychosocial stress. Rural health professionals can work to reduce these risks to farm youth by becoming more aware of the problem, by conducting clinical and epidemiologic research, and by engaging in advocacy at state and local levels.
Arsenic speciation and fucoxanthin analysis from seaweed dietary supplements using LC-MS.
Avula, Bharathi; Wang, Yan-Hong; Khan, Ikhlas A
2015-01-01
The study involves the analysis of total arsenic (As) in metallic form, and organic and inorganic As species from seaweeds and dietary supplements. The analysis provides data for dietary exposure estimates of inorganic species that are considered more toxic to humans than organic and total As. Total As was determined by acid digestion followed by inductively coupled plasma (ICP)-MS. To characterize the As species, solvent extraction with sonication and microwave extraction using various aqueous and aqueous/organic solvent mixtures were initially evaluated. The optimum As speciation method was determined to be water extraction followed by anion exchange HPLC coupled with ICP-MS. Optimization of chromatographic conditions led to baseline separation for six As species, including As acid, arsenous acid, monomethylarsonic acid, dimethylarsinic acid, arsenobetaine, and arsenocholine, in approximately 8 min using gradient elution. Detection limits for all six compounds were in the range of 10-15 ng/mL. The data presented here will be valuable for the QA of analytical method development and surveys of total As and As species in dietary supplements. The most abundant As species found were arsenite [As(III)] and arsenate [As(V)]. The sum of inorganic As species present in the dietary supplements ranged from 1.2 to 31 μg/day. In addition, the dietary supplements purported to contain fucoxanthin, a carotenoid having pharmacological activities, were analyzed using ultra-performance LC-UV/MS.
Solvent Hold Tank Sample Results for MCU-15-661-662-663: April 2015 Monthly Sample
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F.; Taylor-Pashow, K.
2015-07-08
The Savannah River National Lab (SRNL) received one set of Solvent Hold Tank (SHT) samples (MCU-15-661, MCU-15-662, and MCU-15-663 pulled on April 2, 2015) for analysis. The samples were combined and analyzed for composition. Analysis of the composite sample MCU-15-661-662-663 indicated a low concentration (~ 63% of nominal) of the suppressor (TiDG) and a slightly below the nominal concentration (~ 10% below nominal) of the extractant (MaxCalix). The modifier (CS-7SB) level was also 10% below its nominal value while the Isopar™ L level was slightly above its nominal value. This analysis confirms the addition of Isopar™L to the solvent onmore » March 6, 2015. Despite that the values are below target component levels, the current levels of TiDG, CS-7SB and MaxCalix are sufficient for continuing operation without adding a trim at this time until the next monthly sample. No impurities above the 1000 ppm level were found in this solvent. However, the sample was found to contain approximately 18.4 ug/g solvent mercury. The gamma level increased to 8 E5 dpm/mL solvent and it represents an order of magnitude increase relative to previous solvent samples. The increase means less cesium is being stripped from the solvent. Further analysis is needed to determine if the recent spike in the gamma measurement is due to external factors such as algae or other material that may impede stripping. The laboratory will continue to monitor the quality of the solvent in particular for any new impurity or degradation of the solvent components.« less
Mainero Rocca, Lucia; Cecca, Juri; L'Episcopo, Nunziata; Fabrizi, Giovanni
2017-11-01
A new field of application for a relatively new mass-spectrometric interface such as desorption electrospray ionization was evaluated. For this purpose, its behavior was tested versus quantitative analysis of dimethoate, trifloxystrobin, and tebuconazole directly on olive and vine leaves surface. The goal was workers exposure assessment during field re-entry operations since evidence suggests an association between chronic occupational exposure to some agrochemicals and severe adverse effects. Desorption electrospray ionization gave good response working in positive ionization mode, while numerous test were necessary for the choice of a unique blend of spray solvents suitable for all 3 substances. The best compromise, in terms of signal to noise ratios, was obtained with the CH 3 OH/H 2 O (80:20) mixture. The obvious difficulties related to the impossibility to use the internal standard were overcome through an accurate validation. Limits of detection and quantitation, dynamic ranges, matrix effects, and intraday precisions were calculated, and a small monitoring campaign was arranged to test method applicability and to evaluate potential dermal exposure. This protocol was developed in work safety field, but after a brief investigation, it was find to be suitable also for food residue evaluation. Copyright © 2017 John Wiley & Sons, Ltd.
Ligor, Magdalena; Buszewski, Bogusław
2008-02-01
The objective of these investigations has been the determination of volatile organic compounds including residue solvents present in vegetable oil samples. Some olive oil, rape oil, sunflower oil, soy-bean oil, pumpkin oil, grape oil, rice oil as well as hazel-nut oil samples were analysed. Among residue solvents the following compounds have been mentioned: acetone, n-hexane, benzene, and toluene. Some experiments for the solid phase microextraction (SPME)-GC-flame ionisation detection (FID) were performed to examine extraction conditions such as fiber exposure time, temperature of extraction, and temperature of desorption. Various SPME fibers such as polydimethylsiloxane, Carboxen/polydimethylsiloxane and polydimethylsiloxane/divinylbenzene coatings were used for the isolation of tested compounds from vegetable oil samples. After optimisation of SPME, real vegetable oil samples were examined using SPME-GC/MS. Based on preliminary experiments the qualitative and quantitative analyses for the determination of acetone, n-hexane, benzene and toluene were performed by SPME-GC-FID and static head-space (SHS)-GC-FID methods. The regression coefficients for calibration curves for the examined compounds were R(2) > or = 0.992. This shows that the used method is linear in the examined concentration range (0.005-0.119 mg/kg for SPME-GC-FID and 0.003-0.728 mg/kg for SHS-GC-FID). Chemical properties of analysed vegetable oils have been characterised by chemometric procedure (cluster analysis).
Watkins, Patricia L; Watkins, John M
2013-02-01
Established risk factors for hematologic cancers include exposure to ionizing radiation, organic solvents, and genetic mutation; however, the potential roles of environmental and sociological factors are not well explored. As North Dakota engages in significant agricultural activity, the present investigation seeks to determine whether an association exists between the incidence of hematologic cancers and either population density or agricultural occupation for residents of south central North Dakota. The present study is a retrospective analysis. Cases of hematologic malignancies and associated pre-malignant conditions were collected from the regional Central North Dakota Cancer Registry, and analysis of study-specific demographic factors was performed. Significantly higher incidence of hematologic cancers and pre-malignant disorders was associated with residence in an "urban" county and rural city/town. Within the latter designation, there was a higher rate of self-reported agricultural occupation (40% vs 10%, P < 0.0001). The increased incidence of hematologic cancer in low population density areas of south central North Dakota supports the need for more detailed prospective research centered on agricultural exposures.
Dement, John M; Welch, Laura; Ringen, Knut; Bingham, Eula; Quinn, Patricia
2010-03-01
A study of chronic obstructive pulmonary disease (COPD) among 7,579 current and former workers participating in medical screening programs at Department of Energy (DOE) nuclear weapons facilities through September 2008 was undertaken. Participants provided a detailed work and exposure history and underwent a respiratory examination that included a respiratory history, respiratory symptoms, a posterior-anterior (P-A) chest radiograph classified by International Labour Office (ILO) criteria, and spirometry. Statistical models were developed to generate group-level exposure estimates that were used in multivariate logistic regression analyses to explore the risk of COPD in relation to exposures to asbestos, silica, cement dust, welding, paints, solvents, and dusts/fumes from paint removal. Risk for COPD in the study population was compared to risk for COPD in the general US population as determined in National Health and Nutrition Examination Survey (NHANES III). The age-standardized prevalence ratio of COPD among DOE workers compared to all NHANES III data was 1.3. Internal analyses found the odds ratio of COPD to range from 1.6 to 3.1 by trade after adjustment for age, race, sex, smoking, and duration of DOE employment. Statistically significant associations were observed for COPD and exposures to asbestos, silica, welding, cement dusts, and some tasks associated with exposures to paints, solvents, and removal of paints. Our study of construction workers employed at DOE sites demonstrated increased COPD risk due to occupational exposures and was able to identify specific exposures increasing risk. This study provides additional support for prevention of both smoking and occupational exposures to reduce the burden of COPD among construction workers. 2009 Wiley-Liss, Inc.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F. F.; Jones, D. H.
Savannah River National Laboratory (SRNL) received one set of Solvent Hold Tank (SHT) samples (MCU-15-815-816-817-818-819-820), pulled on 11/29/2015 for analysis. The samples were inspected, combined, and analyzed for composition. Chemical analysis of the composite sample MCU-15-815-816-817-818-819-820 indicated the TiDG, Isopar™L, and MaxCalix are at nominal levels. The modifier concentration is 3% below its nominal concentration. This analysis confirms the addition of TiDG, MaxCalix, and modifier to the solvent on November 28, 2015. Based on the current monthly sample, the levels of TiDG, Isopar™L, MaxCalix, and modifier are sufficient for continuing operation but are expected to decrease with time. Periodic characterizationmore » and trimming additions to the solvent are recommended. No impurities above the 1000 ppm level were found in this solvent by the Semi-Volatile Organic Analysis (SVOA). No impurities were observed in the Hydrogen Nuclear Magnetic Resonance (HNMR). However, up to 12.5 ± 3 micrograms of mercury per gram of solvent (or 10.4 μg/mL) was detected in this sample. The solids residues found at the bottom of the p-nut vial from sample MCU-15-815 were determined to be left-over pipe residues that were flushed into the sample and they were found to have no impact on the solvent purity or on the chemical and physical properties of the solvent. The laboratory will continue to monitor the quality of the solvent in particular for any new impurities or degradation of the solvent components.« less
Dotterer, Sally K; Forbes, Robert A; Hammill, Cynthia L
2011-04-05
Case studies are presented demonstrating how exposure to traces of transition metals such as copper and/or iron during sample preparation or analysis can impact the accuracy of purity analysis of pharmaceuticals. Some compounds, such as phenols and indoles, react with metals in the presence of oxygen to produce metal-induced oxidative decomposition products. Compounds susceptible to metal-induced decomposition can degrade following preparation for purity analysis leading to falsely high impurity results. Our work has shown even metals at levels below 0.1 ppm can negatively impact susceptible compounds. Falsely low results are also possible when the impurities themselves react with metals and degrade prior to analysis. Traces of metals in the HPLC mobile phase can lead to chromatographic artifacts, affecting the reproducibility of purity results. To understand and mitigate the impact of metal induced decomposition, a proactive strategy is presented. The pharmaceutical would first be tested for reactivity with specific transition metals in the sample solvent/diluents and in the HPLC mobile phase. If found to be reactive, alternative sample diluents and/or mobile phases with less reactive solvents or addition of a metal chelator would be explored. If unsuccessful, glassware cleaning or sample solution refrigeration could be investigated. By employing this strategy during method development, robust purity methods would be delivered to the quality control laboratories, preventing future problems from potential sporadic contamination of glassware with metals. Copyright © 2010 Elsevier B.V. All rights reserved.
Blando, James D; Schill, Donald P; De La Cruz, Mary Pauline; Zhang, Lin; Zhang, Junfeng
2010-09-01
Many states are considering, and some states have actively pursued, banning the use of perchloroethylene (PERC) in dry cleaning establishments. Proposed legislation has led many dry cleaners to consider the use of products that contain greater than 90% n-propyl bromide (n-PB; also called 1-bromopropane or 1-BP). Very little information is known about toxicity and exposure to n-PB. Some n-PB-containing products are marketed as nonhazardous and "green" or "organic." This has resulted in some users perceiving the solvent as nontoxic and has resulted in at least one significant poisoning incident in New Jersey. In addition, many dry cleaning operators may not realize that the machine components and settings must be changed when converting from PERC to n-PB containing products. Not performing these modifications may result in overheating and significant leaks in the dry cleaning equipment. A preliminary investigation was conducted of the potential exposures to n-PB and isopropyl bromide (iso-PB; also called 2-bromopropane or 2-BP) among dry cleaners in New Jersey who have converted their machines from PERC to these new solvent products. Personal breathing zone and area samples were collected using the National Institute for Occupational Safety and Health Sampling and Analytical Method 1025, with a slight modification to gas chromatography conditions to facilitate better separation of n-PB from iso-PB. During the preliminary investigation, exposures to n-PB among some workers in two of three shops were measured that were greater than the American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit value (TLV) for n-PB. The highest exposure measured among a dry cleaning machine operator was 54 parts per million (ppm) as an 8-hr time-weighted average, which is more than 5 times the ACGIH TLV of 10 ppm. The preliminary investigation also found that the work tasks most likely to result in the highest short-term exposures included the introduction of solvent to the machine, maintenance of the machine, unloading and handling of recently cleaned clothes, and interrupting the wash cycle of the machine. In addition, this assessment suggested that leaks may have contributed to exposure and may have resulted from normal machine wear over time, ineffective maintenance, and from the incompatibility of n-PB with gasket materials.
Downstream Processing of Synechocystis for Biofuel Production
NASA Astrophysics Data System (ADS)
Sheng, Jie
Lipids and free fatty acids (FFA) from cyanobacterium Synechocystis can be used for biofuel (e.g. biodiesel or renewable diesel) production. In order to utilize and scale up this technique, downstream processes including culturing and harvest, cell disruption, and extraction were studied. Several solvents/solvent systems were screened for lipid extraction from Synechocystis. Chloroform + methanol-based Folch and Bligh & Dyer methods were proved to be "gold standard" for small-scale analysis due to their highest lipid recoveries that were confirmed by their penetration of the cell membranes, higher polarity, and stronger interaction with hydrogen bonds. Less toxic solvents, such as methanol and MTBE, or direct transesterification of biomass (without preextraction step) gave only slightly lower lipid-extraction yields and can be considered for large-scale application. Sustained exposure to high and low temperature extremes severely lowered the biomass and lipid productivity. Temperature stress also triggered changes of lipid quality such as the degree of unsaturation; thus, it affected the productivities and quality of Synechocystis-derived biofuel. Pulsed electric field (PEF) was evaluated for cell disruption prior to lipid extraction. A treatment intensity > 35 kWh/m3 caused significant damage to the plasma membrane, cell wall, and thylakoid membrane, and it even led to complete disruption of some cells into fragments. Treatment by PEF enhanced the potential for the low-toxicity solvent isopropanol to access lipid molecules during subsequent solvent extraction, leading to lower usage of isopropanol for the same extraction efficiency. Other cell-disruption methods also were tested. Distinct disruption effects to the cell envelope, plasma membrane, and thylakoid membranes were observed that were related to extraction efficiency. Microwave and ultrasound had significant enhancement of lipid extraction. Autoclaving, ultrasound, and French press caused significant release of lipid into the medium, which may increase solvent usage and make medium recycling difficult. Production of excreted FFA by mutant Synechocystis has the potential of reducing the complexity of downstream processing. Major problems, such as FFA precipitation and biodegradation by scavengers, account for FFA loss in operation. Even a low concentration of FFA scavengers could consume FFA at a high rate that outpaced FFA production rate. Potential strategies to overcome FFA loss include high pH, adsorptive resin, and sterilization techniques.
1984-02-01
DYE AEROSOL Rogene F. Henderson Y. S. Cheng J. S. Dutcher T. C. Marshall J. E. White 0)February 1 . 1984 Supported by SU. S. ARMY MEDICAL RESEARCH AND...from Report) 1 . SUPPLEMENTARY NOTES IS. KEY WORDS (Coattine on re tore* side I’ necessary teid iatfiy by biock nuqber) Solvent Yellow Dye Aerosols...Solvent Green Exposure Atmosphere 2-(2’-quinolyl )-1,3-indandione 1 -4-di-p-toluidinoanthraquinone 20. AmTlACT (Cowftfuem a reserve ft D rofmwe ,uy md
Polymer Latex Stability Modification by Exposure to Hydrophobic Solvents.
de Oliveira Cardoso A; Galembeck
1998-08-01
The stability of latex particles toward coagulation in the presence of salt is modified by swelling the latex with toluene and chloroform vapors. Short-term stability was determined by turbidimetric titrations, and the long-term stability was evaluated by adding latex and salt solutions, allowing the mixture to age for 24 or 48 h and determining the characteristics of the supernatant and of the sediment. Nine different latexes were examined, with variable results: in some cases, both apolar solvents stabilize the latex; in other cases, increased stability is induced by only one of the solvents, either toluene or chloroform. There is also coherence, but not a strict correlation, between the solvent effects on short- and long-term stability. For instance, in the case of a core-and-shell styrene-butyl methacrylate latex, chloroform has a small stabilizing effect in the titration experiment, but it prevents the formation of a coagulated latex sediment even 48 h after mixing latex and salt. Two hypotheses are discussed to account for these observations: (i) swelling solvents decrease the particles ability to dissipate the collision kinetic energy, so that particles collide but without joining each other; (ii) the solvents induce the release of trapped charged groups from the particle interior to the interface, enhancing the usual (electrostatic, steric, hydration) stability factors. Copyright 1998 Academic Press.
Le Moual, Nicole; Zock, Jan-Paul; Dumas, Orianne; Lytras, Theodore; Andersson, Eva; Lillienberg, Linnéa; Schlünssen, Vivi; Benke, Geza; Kromhout, Hans
2018-07-01
We aimed to update an asthmagen job exposure matrix (JEM) developed in the late 1990s. Main reasons were: the number of suspected and recognised asthmagens has since tripled; understanding of the aetiological role of irritants in asthma and methodological insights in application of JEMs have emerged in the period. For each agent of the new occupational asthma-specific JEM (OAsJEM), a working group of three experts out of eight evaluated exposure for each International Standard Classification of Occupations, 1988 (ISCO-88) job code into three categories: 'high' (high probability of exposure and moderate-to-high intensity), 'medium' (low-to-moderate probability or low intensity) and 'unexposed'. Within a working group, experts evaluated exposures independently from each other. If expert assessments were inconsistent the final decision was taken by consensus. Specificity was favoured over sensitivity, that is, jobs were classified with high exposure only if the probability of exposure was high and the intensity moderate-to-high. In the final review, all experts checked assigned exposures and proposed/improved recommendations for expert re-evaluation after default application of the JEM. The OAsJEM covers exposures to 30 sensitisers/irritants, including 12 newly recognised, classified into seven broad groups. Initial agreement between the three experts was mostly fair to moderate (κ values 0.2-0.5). Out of 506 ISCO-88 codes, the majority was classified as unexposed (from 82.6% (organic solvents) to 99.8% (persulfates)) and a minority as 'high-exposed' (0.2% (persulfates) to 2.6% (organic solvents)). The OAsJEM developed to improve occupational exposure assessment may improve evaluations of associations with asthma in epidemiological studies and contribute to assessment of the burden of work-related asthma. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
Space Environmentally Stable Polyimides and Copolyimides
NASA Technical Reports Server (NTRS)
Watson, Kent A.; Connell, John W.
2000-01-01
Polyimides with a unique combination of properties including low color in thin films, atomic oxygen (AO), ultra-violet (UV) radiation resistance, solubility in organic solvents in the imide form, high glass transition (T(sub g)) temperatures and high thermal stability have been prepared and characterized. The polymers were prepared by reacting a novel aromatic diamine with aromatic dianhydrides in a polar aprotic solvent. The solubility of the polymers in the imide form as well as the color density of thin films were dependent upon the chemical structure of the dianhydride. Several thin films (25-50 mm thick) prepared by solution casting of amide acid or imide solutions exhibited very low color and high optical transparency (approximately 90%) as determined by UV/visible spectroscopy. The polymers exhibited T(sub g)s >200 C depending upon the structure of the dianhydride and temperatures of 5% weight loss approximately 500C in air as determined by dynamic thermogravimetric analysis. Thin films coated with silver/inconel were exposed to a high fluence of AO and 1000 equivalent solar hours of UV radiation. The effects of these exposures on optical properties were minor. These space environmentally durable polymers are potentially useful in a variety of applications on spacecraft such as thin film membranes on antennas, second-surface mirrors, thermal/optical coatings and multi-layer thermal insulation (MLI) blanket materials. The chemistry, physical and mechanical properties of the polymers as well as their responses to AO and UV exposure will be discussed.
Occupational Risk Factors and the Relationship of Smoking with Anxiety and Depression
Ergün, Dilek; Ergan, Begüm; Kurt, Özlem Kar
2018-01-01
OBJECTIVES The aim of the present study was to evaluate the relation of smoking with anxiety and depression in workers who were exposed to occupational risk factors. For this purpose, working time, smoking status, nicotine dependence, and respiratory functions of the workers who were exposed to physical and/or chemical harmful substances were evaluated and the presence of anxiety/depression was investigated. MATERIAL AND METHODS Male workers who were exposed to occupational risk factors such as solvents, heavy metals, and dust and visited the outpatient clinic for occupational diseases within a one-year period were included. Pulmonary Function Test and Fagerström Test for Nicotine Dependence were performed. Anxiety and depression statuses of the workers were assessed using the Hospital Anxiety and Depression Scale. RESULTS The mean age of 665 male workers was 45 y (range, 38–48 y), and they were most commonly exposed to solvents (45.9%), followed by heavy metal fume/dust (20.9%). Of the workers, 252 (37.9%) had anxiety, 294 (44.2%) had depression, and 171 (25.7%) had both. More than half of the workers in each occupation/exposure group were smokers. Respiratory complaints were present in 34% of the workers. According to the regression analysis, the presence of respiratory system complaints was found to be a significant risk factor for anxiety, depression, and anxiety plus depression. CONCLUSION In conclusion, smoking and anxiety/depression were found to be the conditions affecting more than half of the workers with occupational exposure. PMID:29755811
‘GREENER’ CHEMICAL SYNTHESES USING MICROWAVES
The diverse nature of chemical entities requires various green strategic pathways in our quest towards attaining sustainability. A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of less-expensive and recyclable ...
NON-TRADITIONAL 'GREENER' ALTERNATIVES TO ORGANIC SYNTHESES
Synthetic organic transformations performed under non-traditional conditions are becoming popular primarily to circumvent the growing environmental concerns. A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of l...
NON-TRADITIONAL 'GREENER' ALTERNATIVES TO CHEMICAL TRANSFORMATIONS
Synthetic organic transformations performed under non-traditional conditions are becoming popular primarily to circumvent the growing environmental concerns. A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of l...
ENVIRONMENTALLY FRIENDLIER SYNTHETIC ALTERNATIVES USING NON-TRADITIONAL APPROACHES
Synthetic organic transformations performed under non-traditional conditions are becoming popular primarily to circumvent the growing environmental concerns. A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) either in presence of a cataly...
Sharma, Vikas K.; Patapoff, Thomas W.; Kabakoff, Bruce; Pai, Satyan; Hilario, Eric; Zhang, Boyan; Li, Charlene; Borisov, Oleg; Kelley, Robert F.; Chorny, Ilya; Zhou, Joe Z.; Dill, Ken A.; Swartz, Trevor E.
2014-01-01
For mAbs to be viable therapeutics, they must be formulated to have low viscosity, be chemically stable, and have normal in vivo clearance rates. We explored these properties by observing correlations of up to 60 different antibodies of the IgG1 isotype. Unexpectedly, we observe significant correlations with simple physical properties obtainable from antibody sequences and by molecular dynamics simulations of individual antibody molecules. mAbs viscosities increase strongly with hydrophobicity and charge dipole distribution and decrease with net charge. Fast clearance correlates with high hydrophobicities of certain complementarity determining regions and with high positive or high negative net charge. Chemical degradation from tryptophan oxidation correlates with the average solvent exposure time of tryptophan residues. Aspartic acid isomerization rates can be predicted from solvent exposure and flexibility as determined by molecular dynamics simulations. These studies should aid in more rapid screening and selection of mAb candidates during early discovery. PMID:25512516
To investigate the contribution of different life stages on response to toxicants, we utilized a custom designed RT-PCR array to examine the effects of acute exposure by oral gavage of the volatile organic solvent toluene (0.00, 0.65 or 1.0 glkg) in the brains of ma1e Brown Norwa...
Deposition and material response from Mach 0.3 burner rig combustion of SRC 2 fuels
NASA Technical Reports Server (NTRS)
Santoro, G. J.; Kohl, F. J.; Stearns, C. A.; Fryburg, G. C.; Johnson, J. R.
1980-01-01
Collectors at 1173K (900 C) were exposed to the combustion products of a Mach 0.3 burner rig fueled with various industrial turbine liquid fuels from solvent refined coals. Four fuels were employed: a naphtha, a light oil, a wash solvent and a mid-heavy distillate blend. The response of four superalloys (IN-100, U 700, IN 792 and M-509) to exposure to the combustion gases from the SRC-2 naphtha and resultant deposits was also determined. The SRC-2 fuel analysis and insights obtained during the combustion experience are discussed. Particular problems encountered were fuel instability and reactions of the fuel with hardware components. The major metallic elements which contributed to the deposits were copper, iron, chromium, calcium, aluminum, nickel, silicon, titanium, zinc, and sodium. The deposits were found to be mainly metal oxides. An equilibrium thermodynamic analysis was employed to predict the chemical composition of the deposits. The agreement between the predicted and observed compounds was excellent. No hot corrosion was observed. This was expected because the deposits contained very little sodium or potassium and consisted mainly of the unreactive oxides. However, the amounts of deposits formed indicated that fouling is a potential problem with the use of these fuels.
Pleban, Francis T; Oketope, Olutosin; Shrestha, Laxmi
2017-12-01
A review study was conducted to examine the adverse effects of styrene, styrene mixtures, or styrene and/or styrene mixtures and noise on the auditory system in humans employed in occupational settings. The search included peer-reviewed articles published in English language involving human volunteers spanning a 25-year period (1990-2015). Studies included peer review journals, case-control studies, and case reports. Animal studies were excluded. An initial search identified 40 studies. After screening for inclusion, 13 studies were retrieved for full journal detail examination and review. As a whole, the results range from no to mild associations between styrene exposure and auditory dysfunction, noting relatively small sample sizes. However, four studies investigating styrene with other organic solvent mixtures and noise suggested combined exposures to both styrene organic solvent mixtures may be more ototoxic than exposure to noise alone. There is little literature examining the effect of styrene on auditory functioning in humans. Nonetheless, findings suggest public health professionals and policy makers should be made aware of the future research needs pertaining to hearing impairment and ototoxicity from styrene. It is recommended that chronic styrene-exposed individuals be routinely evaluated with a comprehensive audiological test battery to detect early signs of auditory dysfunction.
Evaluation of certain food additives and contaminants.
2013-01-01
This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and a food contaminant with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for seven food additives (advantame; glucoamylase from Trichoderma reesei expressed in Trichoderma reesei; glycerol ester of gum rosin; glycerol ester of tall oil rosin; glycerol ester of wood rosin; nisin; and octenyl succinic acid modified gum arabic) and an assessment of dietary exposure to cadmium from cocoa and cocoa products. Specifications for the following food additives were revised: annatto extracts (solvent-extracted bixin and solvent-extracted norbixin); Benzoe tonkinensis; food additives containing aluminium and/or silicon; mineral oil (medium viscosity); modified starches; paprika extract; phosphates (analytical methods for the determination of phosphorus and revision of specifications); 3-phytase from Aspergillus niger expressed in Aspergillus niger; potassium aluminium silicate; and potassium aluminium silicate-based pearlescent pigments. Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of the food additives and contaminant considered.
Li, B O; Sun, Hui; Zhou, Shenggao
The solute-solvent interface that separates biological molecules from their surrounding aqueous solvent characterizes the conformation and dynamics of such molecules. In this work, we construct a solvent fluid dielectric boundary model for the solvation of charged molecules and apply it to study the stability of a model cylindrical solute-solvent interface. The motion of the solute-solvent interface is defined to be the same as that of solvent fluid at the interface. The solvent fluid is assumed to be incompressible and is described by the Stokes equation. The solute is modeled simply by the ideal-gas law. All the viscous force, hydrostatic pressure, solute-solvent van der Waals interaction, surface tension, and electrostatic force are balanced at the solute-solvent interface. We model the electrostatics by Poisson's equation in which the solute-solvent interface is treated as a dielectric boundary that separates the low-dielectric solute from the high-dielectric solvent. For a cylindrical geometry, we find multiple cylindrically shaped equilibrium interfaces that describe polymodal (e.g., dry and wet) states of hydration of an underlying molecular system. These steady-state solutions exhibit bifurcation behavior with respect to the charge density. For their linearized systems, we use the projection method to solve the fluid equation and find the dispersion relation. Our asymptotic analysis shows that, for large wavenumbers, the decay rate is proportional to wavenumber with the proportionality half of the ratio of surface tension to solvent viscosity, indicating that the solvent viscosity does affect the stability of a solute-solvent interface. Consequences of our analysis in the context of biomolecular interactions are discussed.
NASA Astrophysics Data System (ADS)
Takei, Satoshi; Oshima, Akihiro; Oyama, Tomoko G.; Ito, Kenta; Sugahara, Kigenn; Kashiwakura, Miki; Kozawa, Takahiro; Tagawa, Seiichi
2014-05-01
An organic solvent-free sugar-based transparency nanopatterning material which had specific desired properties such as nanostructures of subwavelength grating and moth-eye antireflection, acceptable thermal stability of 160 °C, and low imaginary refractive index of less than 0.005 at 350-800 nm was proposed using electron beam lithography. The organic solvent-free sugar-based transparency nanopatterning material is expected for non-petroleum resources, environmental affair, safety, easiness of handling, and health of the working people, instead of the common developable process of tetramethylammonium hydroxide. 120 nm moth-eye antireflection nanopatterns images with exposure dose of 10 μC/cm2 were provided by specific process conditions of electron beam lithography. The developed sugar derivatives with hydroxyl groups and EB sensitive groups in the organic solvent-free sugar-based transparency nanopatterning material were applicable to future development of optical interface films of biology and electronics as a novel chemical design.
Smartphone-Based VOC Sensor Using Colorimetric Polydiacetylenes.
Park, Dong-Hoon; Heo, Jung-Moo; Jeong, Woomin; Yoo, Young Hyuk; Park, Bum Jun; Kim, Jong-Man
2018-02-07
Owing to a unique colorimetric (typically blue-to-red) feature upon environmental stimulation, polydiacetylenes (PDAs) have been actively employed in chemosensor systems. We developed a highly accurate and simple volatile organic compound (VOC) sensor system that can be operated using a conventional smartphone. The procedure begins with forming an array of four different PDAs on conventional paper using inkjet printing of four corresponding diacetylenes followed by photopolymerization. A database of color changes (i.e., red and hue values) is then constructed on the basis of different solvatochromic responses of the 4 PDAs to 11 organic solvents. Exposure of the PDA array to an unknown solvent promotes color changes, which are imaged using a smartphone camera and analyzed using the app. A comparison of the color changes to the database promoted by the 11 solvents enables the smartphone app to identify the unknown solvent with 100% accuracy. Additionally, it was demonstrated that the PDA array sensor was sufficiently sensitive to accurately detect the 11 VOC gases.
Schütte, Marcus; Fetzner, Susanne
2007-03-01
The estA gene encoding a novel cytoplasmic carboxylesterase from Arthrobacter nitroguajacolicus Rü61a was expressed in Escherichia coli. Sequence analysis and secondary structure predictions suggested that EstA belongs to the family VIII esterases, which are related to class C beta-lactamases. The S-x-x-K motif that in beta-lactamases contains the catalytic nucleophile, and a putative active-site tyrosine residue are conserved in EstA. The native molecular mass of hexahistidine-tagged (His6) EstA, purified by metal chelate affinity chromatography, was estimated to be 95 kDa by gel filtration, whereas the His6EstA peptide has a calculated molecular mass of 42.1 kDa. The enzyme catalyzes the hydrolysis of short-chain phenylacyl esters and triglycerides, and shows weak activity toward 2-hydroxy- and 2-nitroacetanilide. Its catalytic activity was inhibited by the serine-specific effector phenylmethylsulfonyl fluoride, and by Cd2+ and Hg2+ ions. Maximum activity of His6EstA was observed at a pH of 9.5 and a temperature of 50 degrees C to 60 degrees C. The enzyme was fairly thermostable. After 19 days at 50 degrees C and after 24 hours at 60 degrees C, its residual relative esterase activity toward phenylacetate was still 53% and 30%, respectively. Exposure of His6EstA to buffer-solvent mixtures showed that the enzyme was inactivated by several high log P (hydrophobic) solvents, whereas it showed remarkable stability and activity in up to 30% (by volume) of polar (low log P) organic solvents such as dimethylsulfoxide, methanol, acetonitrile, acetone, and propanol.
Beseler, Cheryl L.; Stallones, Lorann; Hoppin, Jane A.; Alavanja, Michael C.R.; Blair, Aaron; Keefe, Thomas; Kamel, Freya
2008-01-01
Background We evaluated the relationship between diagnosed depression and pesticide exposure using information from private pesticide applicators enrolled in the Agricultural Health Study between 1993 and 1997 in Iowa and North Carolina. Methods There were 534 cases who self-reported a physician-diagnosed depression and 17,051 controls who reported never having been diagnosed with depression and did not feel depressed more than once a week in the past year. Lifetime pesticide exposure was categorized in three mutually exclusive groups: low (< 226 days, the reference group), intermediate (226–752 days), and high (> 752 days). Two additional measures represented acute high-intensity pesticide exposures: an unusually high pesticide exposure event (HPEE) and physician-diagnosed pesticide poisoning. Logistic regression analyses were performed relating pesticide exposure to depression. Results After adjusting for state, age, education, marital status, doctor visits, alcohol use, smoking, solvent exposure, not currently having crops or animals, and ever working a job off the farm, pesticide poisoning was more strongly associated with depression [odds ratio (OR) = 2.57; 95% confidence interval (CI), 1.74–3.79] than intermediate (OR = 1.07; 95% CI, 0.87–1.31) or high (OR = 1.11; 95% CI, 0.87–1.42) cumulative exposure or an HPEE (OR = 1.65; 95% CI, 1.33–2.05). In analysis of a subgroup without a history of acute poisoning, high cumulative exposure was significantly associated with depression (OR = 1.54; 95% CI, 1.16–2.04). Conclusion These findings suggest that both acute high-intensity and cumulative pesticide exposure may contribute to depression in pesticide applicators. Our study is unique in reporting that depression is also associated with chronic pesticide exposure in the absence of a physician-diagnosed poisoning. PMID:19079725
Solvent mimicry with methylene carbene to probe protein topography.
Gómez, Gabriela Elena; Monti, José Luis E; Mundo, Mariana Rocío; Delfino, José María
2015-10-06
The solvent accessible surface area (SASA) of the polypeptide chain plays a key role in protein folding, conformational change, and interaction. This fundamental biophysical parameter is elusive in experimental measurement. Our approach to this problem relies on the reaction of the minimal photochemical reagent diazirine (DZN) with polypeptides. This reagent (i) exerts solvent mimicry because its size is comparable to water and (ii) shows scant chemical selectivity because it generates extremely reactive methylene carbene. Methylation gives rise to the EM (extent of modification) signal, which is useful for scrutinizing the conformational change triggered by Ca(2+) binding to calmodulin (CaM). The increased EM observed for the full protein is dominated by the enhanced exposure of hydrophobic area in Ca(2+)-CaM. Fragmentation allowed us to quantify the methylene incorporation at specific sites. Peptide 91-106 reveals a major reorganization around the calcium 151 binding site, resulting in local ordering and a greater exposure of the hydrophobic surface. Additionally, this technique shows a high sensitivity to probe recognition between CaM and melittin (Mel). The large decrease in EM indicates the occlusion of a significant hydrophobic area upon complexation. Protection from labeling reveals a larger involvement of the N-terminal and central regions of CaM in this interaction. Despite its smaller size, Mel's differential exposure can also be quantified. Moreover, MS/MS fragmentation realizes the goal of extending the resolution of labeled sites at the amino acid level. Overall, DZN labeling emerges as a useful footprinting method capable of shedding light on physiological conformational changes and interactions.
NASA Astrophysics Data System (ADS)
Cotto, I.; Padilla, I. Y.; De Jesús, N. H.; Torres, P. M.
2015-12-01
Trace organic contaminants such as phthalates, among other chemicals of emerging concerns, have not historically been considered as pollutants but are being detected in water, posing a potential risk to public health and the environment. One of the most common phthalates of particular concern is di-(2-ethylhexyl) phthalate (DEHP), a plasticizer normally found in plastics and consumer products, including: cosmetics, pharmaceuticals, medical devices, food packages, water bottles, and wiring cables. DEHP has been associated with preterm birth, a major cause of neonatal mortality and health complications. This study aims at monitoring the presence and concentration of DEHP and other phthalates in groundwater and tap water systems in Puerto Rico, which has one of the highest rates of preterm birth in the U.S. The Environmental Protection Agency (EPA) suggests a liquid-liquid extraction method that uses methylene chloride as the preferred organic solvent for the extractions. This work presents modified EPA methods that reduce the volume of sample and solvent used, lower the time of analysis, increase productivity, and decrease hazards and waste. Distribution coefficient of DEHP between methylene chloride and water are estimated and related to sample extraction efficiency. Research results indicate that DEHP is in fact distributed between water and methylene chloride with a distribution coefficient average value of 1.24. The study concludes that the sample and solvent volumes have influence on the efficiency but have not an effect on the distribution coefficient. The tests show higher extraction efficiencies for lower DEHP concentrations and higher extraction volumes. Results from the water analysis show presence of DEHP in 55% of groundwater and 44% of tap water samples, indicating a potential exposure through water.
Bell, Iris R; Lewis, Daniel A; Brooks, Audrey J; Lewis, Sabrina E; Schwartz, Gary E
2003-02-01
To determine the feasibility of using a computerized biophysical method, gas discharge visualization (GDV), to differentiate ultramolecular doses of homeopathic remedies from solvent controls and from each other. Blinded, randomized assessment of four split samples each of 30c potencies of three homeopathic remedies from different kingdoms, for example, Natrum muriaticum (mineral), Pulsatilla (plant), and Lachesis (animal), dissolved in a 20% alcohol-water solvent versus two different control solutions (that is, solvent with untreated lactose/sucrose pellets and unsuccussed solvent alone). GDV measurements, involving application of a brief electrical impulse at four different voltage levels, were performed over 10 successive images on each of 10 drops from each bottle (total 400 images per test solution per voltage). The dependent variables were the quantified image characteristics of the liquid drops (form coefficient, area, and brightness) from the resultant burst of electron-ion emission and optical radiation in the visual and ultraviolet ranges. The procedure generated measurable images at the two highest voltage levels. At 17 kV, the remedies exhibited overall lower image parameter values compared with solvents (significant for Pulsatilla and Lachesis), as well as differences from solvents in fluctuations over repeated images (exposures to the same voltage). At 24 kV, other patterns emerged, with individual remedies showing higher or lower image parameters compared with other remedies and the solvent controls. GDV technology may provide an electromagnetic probe into the properties of homeopathic remedies as distinguished from solvent controls. However, the present findings also highlight the need for additional research to evaluate factors that may affect reproducibility of results.
Are Pesticides Taking Away the Ability of Our Children to Learn?
ERIC Educational Resources Information Center
O'Brien, Mary
1991-01-01
The effects of neurotoxins on the development of the central and peripheral nervous systems are discussed. Organophosphates, carbamates, organic solvents, and dioxin are highlighted. The effects of long- and short-term exposure are described. (CW)
GREENER CHEMICAL SYNTHESES USING MICROWAVE IRRADIATION
Greener solvent-free protocols involve microwave (MW) exposure of neat reactants catalyzed by the surfaces of recyclable mineral supports such as alumina, silica and clay which are applicable to a wide range of cleavage, condensation, cyclization, oxidation and reduction reaction...
Behavorial effects of subchronic inhalation of toluene in adult rats
Whereas the acute neurobehavioral effects oftoluene are robust and well characterized, evidence for persistent effects ofrepeated exposure to this industrial solvent is less compelling. The present studies sought to determine whether repeated inhalation oftoluene caused persist...
CHEMICAL SYNTHESIS & TRANSFORMATIONS USING MICROWAVES
A historical account of the utility of microwaves in a variety of chemical synthesis applications will be presented, including a solvent-free strategy that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of recyclable mineral supports such...
GREENER CHEMICAL SYNTHESIS USING MICROWAVES
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of recyclable mineral supports such as alumina, silica, clay, or "doped" surfaces is presented which is applicable to a wide range of cleavage, condensation, cyc...
ACUTE BEHAVIORAL TOXICITY OF SULFOLANE: INFLUENCE OF HYPOTHERMIA
Sulfolane is a solvent which produces hypothermia and decreased oxygen consumption following acute exposure. In the present experiment, the author investigated effects of sulfolane on a behavioral measure of toxicity at ambient temperatures which would either prevent or facilitat...
Abuse Pattern of Toluene Exposure Alters Mouse Behavior in a Waiting-for-Reward Operant Task
Bowen, Scott E.; McDonald, Phillip
2009-01-01
Inhaling solvents for recreational purposes continues to be a world-wide public health concern. Toluene, a volatile solvent in many abused products, adversely affects the central nervous system. However, the long-term neurobehavioral effects of exposure to high-concentration, binge patterns typical of toluene abuse remain understudied. We studied the behavioral effects of repeated toluene exposure on cognitive function following binge toluene exposure on behavioral impulse control in Swiss Webster mice using a “wait-for-reward” operant task. Mice were trained on a fixed-ratio (FR) schedule using sweetened milk as a reward. Upon achieving FR15, a wait component was added which delivered free rewards in the absence of responses at increasing time intervals (2 sec, 4 sec, 6 sec, etc…). Mice continued to receive free rewards until they pressed a lever that reinstated the FR component (FR Reset). Once proficient in the FR-Wait task, mice were exposed to either 1,000 ppm, 3,600 ppm or 6,000 ppm toluene, or 0 ppm (air controls) for 30 min per day for 40 days. To avoid acute effects of toluene exposure, behavior was assessed 23 hours later. Repeated toluene exposure decreased response rates, the number of FR resets, and increased mean wait time, resulting in a higher response-to-reinforcer ratio than exhibited by controls. Mice receiving the higher exposure level (6,000 ppm) showed a dramatic decrease in the number of rewards received, which was reversed when toluene exposure ceased. Mice receiving the lower exposure level (1,000 ppm) showed little change in the number of rewards. These results indicate that repeated binge exposures to high concentrations of toluene can significantly interfere with performance as measured by a waiting-for-reward task, suggesting a significant impact on cognitive and/or psychomotor function. PMID:18832024
Solvent hold tank sample results for MCU-16-53-55. January 2016 Monthly sample
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F. F.; Jones, D. H.
Savannah River National Laboratory (SRNL) received one set of Solvent Hold Tank (SHT) samples (MCU-16-53-54-55), pulled on 01/25/2016 for analysis. The samples were combined and analyzed for composition. Analysis of the composite sample MCU-16-53-54-55 indicated the Isopar™L, and MaxCalix are at nominal levels. The modifier and TiDG concentrations are 3% and 23 % below their nominal concentrations. This analysis confirms the addition of TiDG, MaxCalix, and modifier to the solvent on November 28, 2015. Based on the current monthly sample, the levels of TiDG, Isopar™L, MaxCalix, and modifier are sufficient for continuing operation but are expected to decrease with time.more » Periodic characterization and trimming additions to the solvent are recommended. No impurities above the 1000 ppm level were found in this solvent by the Semi-Volatile Organic Analysis (SVOA). No impurities were observed in the Hydrogen Nuclear Magnetic Resonance (HNMR). However, the Fourier transform infra-red spectroscopy (FTIR) method detected trace levels (a few ppm) of amides (a possible degradation product of TiDG). In addition, up to 21 ± 4 micrograms of mercury per gram of solvent (or 17.5 μg/mL) was detected in this sample. There appears to be a possible correlation between the mercury level and the TiDG concentration in the solvent. The current gamma level (9.16 E4 dpm/mL) confirmed that the gamma concentration has returned to previous level where the process operated normally and as expected. The laboratory will continue to monitor the quality of the solvent in particular for any new impurities or degradation of the solvent components.« less
COPD and occupational exposures: a case-control study.
Weinmann, Sheila; Vollmer, William M; Breen, Victor; Heumann, Michael; Hnizdo, Eva; Villnave, Jacqueline; Doney, Brent; Graziani, Monica; McBurnie, Mary Ann; Buist, A Sonia
2008-05-01
Evidence demonstrates that occupational exposures are causally linked with chronic obstructive pulmonary disease (COPD). This case-control study evaluated the association between occupational exposures and prevalent COPD based on lifetime occupational history. Cases (n = 388) aged 45 years and older with COPD were compared with controls (n = 356), frequency matched on age, sex, and cigarette smoking history. Odds ratios for exposure to each of eight occupational hazard categories and three composite measures of exposure were computed using logistic regression. RESULTSOccupational exposures most strongly associated with COPD were diesel exhaust, irritant gases and vapors, mineral dust, and metal dust. The composite measures describing aggregate exposure to gases, vapors, solvents, or sensitizers (GVSS) and aggregate exposure to dust, GVSS, or diesel exhaust were also associated with COPD. In the small group of never-smokers, a similar pattern was evident. These population-based findings add to the literature linking occupational exposures to COPD.
2014-03-27
cause contact dermatitis , asthma, and hypersensitivity pneumonitis; the most common adverse health outcome associated with isocyanate exposure is...linked to allergic contact dermatitis in humans and respiratory sensitization in animals. Chronic dermal exposure has resulted in skin irritation and...derivatization stabilizes the highly reactive isocyanates and enhances recovery of the isocyanates that do not come into contact with the derivatization
Matthews, G.
1989-01-01
An overview of the widespread use of gases and some volatile solvents in modern society is given. The usual circumstances in which undue exposure may occur are described. The most prominent symptoms and general principles of diagnosis and treatment are given and are followed by more specific information on the commoner, more toxic materials. While acute poisonings constitute the greater part of the paper, some indication of chronic disorders arising from repeated or prolonged exposure is also given. PMID:2687827
Bouchard, Daniel; Wanner, Philipp; Luo, Hong; McLoughlin, Patrick W; Henderson, James K; Pirkle, Robert J; Hunkeler, Daniel
2017-10-20
The methodology of the solvent-based dissolution method used to sample gas phase volatile organic compounds (VOC) for compound-specific isotope analysis (CSIA) was optimized to lower the method detection limits for TCE and benzene. The sampling methodology previously evaluated by [1] consists in pulling the air through a solvent to dissolve and accumulate the gaseous VOC. After the sampling process, the solvent can then be treated similarly as groundwater samples to perform routine CSIA by diluting an aliquot of the solvent into water to reach the required concentration of the targeted contaminant. Among solvents tested, tetraethylene glycol dimethyl ether (TGDE) showed the best aptitude for the method. TGDE has a great affinity with TCE and benzene, hence efficiently dissolving the compounds during their transition through the solvent. The method detection limit for TCE (5±1μg/m 3 ) and benzene (1.7±0.5μg/m 3 ) is lower when using TGDE compared to methanol, which was previously used (385μg/m 3 for TCE and 130μg/m 3 for benzene) [2]. The method detection limit refers to the minimal gas phase concentration in ambient air required to load sufficient VOC mass into TGDE to perform δ 13 C analysis. Due to a different analytical procedure, the method detection limit associated with δ 37 Cl analysis was found to be 156±6μg/m 3 for TCE. Furthermore, the experimental results validated the relationship between the gas phase TCE and the progressive accumulation of dissolved TCE in the solvent during the sampling process. Accordingly, based on the air-solvent partitioning coefficient, the sampling methodology (e.g. sampling rate, sampling duration, amount of solvent) and the final TCE concentration in the solvent, the concentration of TCE in the gas phase prevailing during the sampling event can be determined. Moreover, the possibility to analyse for TCE concentration in the solvent after sampling (or other targeted VOCs) allows the field deployment of the sampling method without the need to determine the initial gas phase TCE concentration. The simplified field deployment approach of the solvent-based dissolution method combined with the conventional analytical procedure used for groundwater samples substantially facilitates the application of CSIA to gas phase studies. Copyright © 2017 Elsevier B.V. All rights reserved.
Chiu, K H; Lin, C-R; Huang, H-W; Shiea, J; Liu, L L
2012-10-01
The toxic effects of two brominated diphenyl ethers (BDE), BDE-47, and BDE-183, on a benthic oligochaete tubificid, Monopylephorus limosus were studied under laboratory conditions. Investigated responses included survival, growth, and protein expression profiles, at BDE concentrations of 1, 10, 100, and 700 ng/g on a dry soil weight basis, with isooctane as the carrier solvent. Body weight losses among treatments were insignificant after 8 weeks of exposure. The 8-wk LC(50) of BDE-47 and -183 were 2311 and 169 ng/g, respectively. By applying multivariate analysis techniques, protein expression patterns were compared and correlated with stressful sources of long-term culture, carrier solvent, BDE-47 and -183. The treatment of 8-wk 100 ng/g BDE-47 was most closely clustered to the 10 ng/g BDE-183 treatment, based on the 40 examined protein spots. This indicated that BDE-183 was more potent to M. limosus, than was BDE-47. The 2-wk and 8-wk controls clustered into different groups indicating the occurrence of physiological changes due to long-term laboratory culture. Additionally, solvent effect was shown by grouping the isooctane carrier to different clusters. With further characterization by principle component analysis, it was found that the separation was mainly contributed by the 2nd principal-component. And, the primarily inhibitory variation was at spots 2 (UMP-CMP kinase) and 40 (plasma retinol-binding protein precursor) in the 8-wk groups. On the contrary, protein spots 16 (cell division control protein 2 homolog) and 24 (mitochondrial DNA mismatch repair protein) showed stimulatory variation. In all, the observed proteomic responses suggest that BDEs disrupted metabolic function in M. limosus and multivariate analysis tool offers significant potential for the assessment of various stress sources at biochemical level. Copyright © 2012 Elsevier Inc. All rights reserved.
Carelli, Valerio; Franceschini, Flavia; Venturi, Silvia; Barboni, Piero; Savini, Giacomo; Barbieri, Giuseppe; Pirro, Ettore; La Morgia, Chiara; Valentino, Maria L.; Zanardi, Francesca; Violante, Francesco S.; Mattioli, Stefano
2007-01-01
Context Leber hereditary optic neuropathy (LHON) is a maternally inherited loss of central vision related to pathogenic mutations in the mitochondrial genome, which are a necessary but not sufficient condition to develop the disease. Investigation of precipitating environmental/occupational (and additional genetic) factors could be relevant for prevention. Case presentation After a 6-month period of occupational exposure to n-hexane and other organic solvents, a 27-year-old man (a moderate smoker) developed an optic neuropathy. The patient had a full ophthalmologic and neurologic investigation, including standardized cycloergometer test for serum lactic acid levels and a skeletal muscle biopsy. His exposure history was also detailed, and he underwent genetic testing for LHON mitochondrial DNA mutations. The patient suffered a sequential optic neuropathy with the hallmarks of LHON and tested positive for the homoplasmic 11778G → A/ND4 mutation. Routine laboratory monitoring revealed increased concentrations of urinary 2.5 hexandione (n-hexane metabolite) and hippuric acid (toluene metabolite) in the period immediately preceding the visual loss. Discussion In a subject carrying an LHON mutation, the strict temporal sequence of prolonged appreciable occupational exposure followed by sudden onset of visual loss must raise a suspicion of causality (with a possible further interaction with tobacco smoke). Relevance In this article, we add to the candidate occupational/environmental triggers of LHON and highlight the need for appropriate case–control (and laboratory) studies to validate the causal effect of mixed toxic exposures. PMID:17366829
Self-reported tinnitus and ototoxic exposures among deployed Australian Defence Force personnel.
Kirk, Katherine M; McGuire, Annabel; Nielsen, Lisa; Cosgrove, Tegan; McClintock, Christine; Nasveld, Peter E; Treloar, Susan A
2011-04-01
The objective of this study was to investigate the effect of chemical and environmental exposures during deployment on tinnitus among Australian Defence Force personnel previously deployed to Bougainville and East Timor. Participants were asked to self-report recent occurrence and severity of "ringing in the ears," and identify any chemical and environmental exposures during their deployment. Self-reported exposure to loud noises, heavy metals, intense smoke, engine exhaust, solvents and degreasing agents, and chemical spills increased the risk of self-assessed moderate or severe tinnitus. Daily exposure to 4 or more ototoxic factors was associated with 2- to 4-fold increase in the risk. In addition to loud noises, chemical exposures may also play a role in the development of tinnitus among Australian Defence Force personnel serving overseas.
‘GREENER’ CHEMICAL SYNTHESES USING MICROWAVE IRRADIATION (PRAGUE)
'Greener' solvent-free protocols involve microwave (MW) exposure of neat reactants catalyzed by the surfaces of recyclable mineral supports such as alumina, silica and clay which are applicable to a wide range of cleavage, condensation, cyclization, oxidation and reduction reacti...
ORGANIC SYNTHESES UNDER NON-TRADITIONAL CONDITIONS
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of recyclable mineral supports such as alumina, silica, clay, or 'doped' surfaces is presented which is applicable to a wide range of cleavage, condensation, cycl...
EFFICIENT AND GREENER CHEMICAL SYNTHESES USING MICROWAVE IRRADIATION
The diverse nature of chemical entities requires various ‘green’ strategic pathways in our quest towards attaining sustainability. A solvent-free approach involving microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of less-expensive and rec...
DEGREASER SYSTEM POLLUTION PREVENTION EVALUATION
The report gives results of an investigation of the capability of various engineering changes to an existing vapor degreaser to reduce solvent emissions to the atmosphere while remaining within the established U.S. Air Force (USAF) exposure limits for 1,1,1-trichloroethane (TCA).
GREENER ORGANIC SYNTHESES USING ALTERNATIVE REACTION CONDITIONS AND MEDIA
The diverse nature of chemical entities requires various green' strategic pathways in our quest towards attaining sustainability. A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of less-expensive and recyclable...
Synthetic organic reactions performed under non-traditional conditions are gaining popularity primarily to circumvent the growing environmental concerns. A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) either in presence of a catalyst o...
EFFICIENT CHEMICAL TRANSFORMATIONS USING ALTERNATIVE REACTION CONDITIONS AND MEDIA
The diverse nature of chemical entities requires various green' strategic pathways in our quest towards attaining sustainability. A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of less-expensive and recyclable...
ENVIRONMENTALLY FRIENDLIER SYNTHESIS USING ALTERNATIVE REACTION CONDITIONS AND MEDIA
The diverse nature of chemical universe requires various 'greener' strategic pathways in our quest towards attaining sustainability. A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of less-expensive and recycla...
Synthetic organic reactions performed under non-traditional conditions are gaining popularity primarily to circumvent the growing environmental concerns. A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) either in presence of a catalyst o...
Studies of humans chronically exposed to volatile organic solvents have reported impaired visual functions, including low contrast sensitivity and reduced color discrimination. These reports, however, lacked confirmation from controlled laboratory experiments. To addre...
'GREENER' CHEMICAL SYNTHESIS USING MICROWAVE IRRADIATION
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of recyclable mineral supports such as alumina, silica, clay, or 'doped' surfaces is presented which is applicable to a wide range of cleavage, condensation, cycl...
Permitted Daily Exposure for Diisopropyl Ether as a Residual Solvent in Pharmaceuticals
Evandri, Maria Grazia
2018-01-01
Solvents can be used in the manufacture of medicinal products provided their residual levels in the final product comply with the acceptable limits based on safety data. At worldwide level, these limits are set by the “Guideline Q3C (R6) on impurities: guideline for residual solvents” issued by the ICH. Diisopropyl ether (DIPE) is a widely used solvent but the possibility of using it in the pharmaceutical manufacture is uncertain because the ICH Q3C guideline includes it in the group of solvents for which “no adequate toxicological data on which to base a Permitted Daily Exposure (PDE) was found”. We performed a risk assessment of DIPE based on available toxicological data, after carefully assessing their reliability using the Klimisch score approach. We found sufficiently reliable studies investigating subchronic, developmental, neurological toxicity and carcinogenicity in rats and genotoxicity in vitro. Recent studies also investigated a wide array of toxic effects of gasoline/DIPE mixtures as compared to gasoline alone, thus allowing identifying the effects of DIPE itself. These data allowed a comprehensive toxicological evaluation of DIPE. The main target organs of DIPE toxicity were liver and kidney. DIPE was not teratogen and had no genotoxic effects, either in vitro or in vivo. However, it appeared to increase the number of malignant tumors in rats. Therefore, DIPE could be considered as a non-genotoxic animal carcinogen and a PDE of 0.98 mg/day was calculated based on the lowest No Observed Effect Level (NOEL) value of 356 mg/m3 (corresponding to 49 mg/kg/day) for maternal toxicity in developmental rat toxicity study. In a worst-case scenario, using an exceedingly high daily dose of 10 g/day, allowed DIPE concentration in pharmaceutical substances would be 98 ppm, which is in the range of concentration limits for ICH Q3C guideline class 2 solvents. This result might be considered for regulatory decisions. PMID:29686773
Mandiracioglu, Aliye; Akgur, Serap; Kocabiyik, Nesrin; Sener, Ufuk
2011-10-01
This study was conducted to determine whether there was any exposure to toluene, xylene and benzene and to assess the health impact of these solvents on workers in furniture enterprises in Karabaglar, Izmir. This cross-sectional study covered furniture enterprises in Karabaglar, Izmir. This study was comprised of an exposed group consisting of workers engaged in painting and varnishing and therefore exposed either directly or indirectly toluene, xylene and benzene in the workplace and the non-exposed group engaged in other aspects of production. While a total of 261 individuals completed questionnaires, 210 workers agreed to provide blood samples. Blood solvents levels were determined using gas chromatograph at Ege University, Intoxication Research and Application Centre. The modified EUROQUEST questionnaire was used to assess neuropsychological symptoms and neurological and general examination were performed. Occupational and exposure history, demographic and work-related information was collected. In this study of workers, blood toluene and benzene levels were found to be significantly higher among those engaged in painting and varnishing compared to those who perform other tasks. The average blood toluene and benzene concentrations among exposed workers were 6.95 times and 1.64 times respectively higher than those in the nonexposed groups. Smokers and participants who worked in excess of 8 hours/day had higher blood toluene and benzene levels. The most frequently work-related health complaints were back pain, allergies and asthma. No differences were found in the average scores in the neuropsychological symptoms questionnaire between exposed and non-exposed groups. Neurological examination of two individuals with these complaints revealed a loss of reflexes. The workers were unaware that they were being exposed to solvents at work. Tobacco smoke is a major source of internal exposure to benzene. Improving working conditions in furniture work places is a priority.
Mortality among aircraft manufacturing workers
Boice, J. D.; Marano, D. E.; Fryzek, J. P.; Sadler, C. J.; McLaughlin, J. K.
1999-01-01
OBJECTIVES: To evaluate the risk of cancer and other diseases among workers engaged in aircraft manufacturing and potentially exposed to compounds containing chromate, trichloroethylene (TCE), perchloroethylene (PCE), and mixed solvents. METHODS: A retrospective cohort mortality study was conducted of workers employed for at least 1 year at a large aircraft manufacturing facility in California on or after 1 January 1960. The mortality experience of these workers was determined by examination of national, state, and company records to the end of 1996. Standardised mortality ratios (SMRs) were evaluated comparing the observed numbers of deaths among workers with those expected in the general population adjusting for age, sex, race, and calendar year. The SMRs for 40 cause of death categories were computed for the total cohort and for subgroups defined by sex, race, position in the factory, work duration, year of first employment, latency, and broad occupational groups. Factory job titles were classified as to likely use of chemicals, and internal Poisson regression analyses were used to compute mortality risk ratios for categories of years of exposure to chromate, TCE, PCE, and mixed solvents, with unexposed factory workers serving as referents. RESULTS: The study cohort comprised 77,965 workers who accrued nearly 1.9 million person-years of follow up (mean 24.2 years). Mortality follow up, estimated as 99% complete, showed that 20,236 workers had died by 31 December 1996, with cause of death obtained for 98%. Workers experienced low overall mortality (all causes of death SMR 0.83) and low cancer mortality (SMR 0.90). No significant increases in risk were found for any of the 40 specific cause of death categories, whereas for several causes the numbers of deaths were significantly below expectation. Analyses by occupational group and specific job titles showed no remarkable mortality patterns. Factory workers estimated to have been routinely exposed to chromate were not at increased risk of total cancer (SMR 0.93) or of lung cancer (SMR 1.02). Workers routinely exposed to TCE, PCE, or a mixture of solvents also were not at increased risk of total cancer (SMRs 0.86, 1.07, and 0.89, respectively), and the numbers of deaths for specific cancer sites were close to expected values. Slight to moderately increased rates of non-Hodgkin's lymphoma were found among workers exposed to TCE or PCE, but none was significant. A significant increase in testicular cancer was found among those with exposure to mixed solvents, but the excess was based on only six deaths and could not be linked to any particular solvent or job activity. Internal cohort analyses showed no significant trends of increased risk for any cancer with increasing years of exposure to chromate or solvents. CONCLUSIONS: The results from this large scale cohort study of workers followed up for over 3 decades provide no clear evidence that occupational exposures at the aircraft manufacturing factory resulted in increases in the risk of death from cancer or other diseases. Our findings support previous studies of aircraft workers in which cancer risks were generally at or below expected levels. PMID:10615290
Mortality among aircraft manufacturing workers.
Boice, J D; Marano, D E; Fryzek, J P; Sadler, C J; McLaughlin, J K
1999-09-01
To evaluate the risk of cancer and other diseases among workers engaged in aircraft manufacturing and potentially exposed to compounds containing chromate, trichloroethylene (TCE), perchloroethylene (PCE), and mixed solvents. A retrospective cohort mortality study was conducted of workers employed for at least 1 year at a large aircraft manufacturing facility in California on or after 1 January 1960. The mortality experience of these workers was determined by examination of national, state, and company records to the end of 1996. Standardised mortality ratios (SMRs) were evaluated comparing the observed numbers of deaths among workers with those expected in the general population adjusting for age, sex, race, and calendar year. The SMRs for 40 cause of death categories were computed for the total cohort and for subgroups defined by sex, race, position in the factory, work duration, year of first employment, latency, and broad occupational groups. Factory job titles were classified as to likely use of chemicals, and internal Poisson regression analyses were used to compute mortality risk ratios for categories of years of exposure to chromate, TCE, PCE, and mixed solvents, with unexposed factory workers serving as referents. The study cohort comprised 77,965 workers who accrued nearly 1.9 million person-years of follow up (mean 24.2 years). Mortality follow up, estimated as 99% complete, showed that 20,236 workers had died by 31 December 1996, with cause of death obtained for 98%. Workers experienced low overall mortality (all causes of death SMR 0.83) and low cancer mortality (SMR 0.90). No significant increases in risk were found for any of the 40 specific cause of death categories, whereas for several causes the numbers of deaths were significantly below expectation. Analyses by occupational group and specific job titles showed no remarkable mortality patterns. Factory workers estimated to have been routinely exposed to chromate were not at increased risk of total cancer (SMR 0.93) or of lung cancer (SMR 1.02). Workers routinely exposed to TCE, PCE, or a mixture of solvents also were not at increased risk of total cancer (SMRs 0.86, 1.07, and 0.89, respectively), and the numbers of deaths for specific cancer sites were close to expected values. Slight to moderately increased rates of non-Hodgkin's lymphoma were found among workers exposed to TCE or PCE, but none was significant. A significant increase in testicular cancer was found among those with exposure to mixed solvents, but the excess was based on only six deaths and could not be linked to any particular solvent or job activity. Internal cohort analyses showed no significant trends of increased risk for any cancer with increasing years of exposure to chromate or solvents. The results from this large scale cohort study of workers followed up for over 3 decades provide no clear evidence that occupational exposures at the aircraft manufacturing factory resulted in increases in the risk of death from cancer or other diseases. Our findings support previous studies of aircraft workers in which cancer risks were generally at or below expected levels.
An overview of environmental and toxicological aspects of aromatic hydrocarbons. IV. Ethylbenzene.
Fishbein, L
1985-09-01
The solvent aspects of exposure to ethylbenzene are reviewed via an initial examination of the production, use, occurrence, and disposition of ethylbenzene as well as populations potentially at risk. While occupational exposure to ethylbenzene during its production and subsequent conversion to styrene is believed to be minimal, the broader occupational exposure to ethylbenzene during the production and use of 'mixed xylenes' is another area of concern. The general public can be exposed to ethylbenzene in ambient air as a result of its occurrence in motor vehicle exhaust. Additional exposure can arise in indoor environments, mostly from passive exposure to cigarette smoke. Ethylbenzene is primarily an irritant to the skin and mucous membranes and possesses narcotic properties at high concentrations.
Jung, Jong-Min; Lee, Jechan; Kim, Ki-Hyun; Jang, In Geon; Song, Jae Gwang; Kang, Kyeongjin; Tack, Filip M G; Oh, Jeong-Ik; Kwon, Eilhann E; Kim, Hyung-Wook
2017-03-01
We performed toxicological study of mice exposed to lead by quantifying fatty acids in brain of the mice. This study suggests that the introduced analytical method had an extremely high tolerance against impurities such as water and extractives; thus, it led to the enhanced resolution in visualizing the spectrum of fatty acid profiles in animal brain. Furthermore, one of the biggest technical advantages achieved in this study was the quantitation of fatty acid methyl ester profiles of mouse brain using a trace amount of sample (e.g., 100 μL mixture). Methanol was screened as the most effective extraction solvent for mouse brain. The behavioral test of the mice before and after lead exposure was conducted to see the effect of lead exposure on fatty acid composition of the mice' brain. The lead exposure led to changes in disease-related behavior of the mice. Also, the lead exposure induced significant alterations of fatty acid profile (C16:0, C 18:0, and C 18:1) in brain of the mice, implicated in pathology of psychiatric diseases. The alteration of fatty acid profile of brain of the mice suggests that the derivatizing technique can be applicable to most research fields associated with the environmental neurotoxins with better resolution in a short time, as compared to the current protocols for lipid analysis. Copyright © 2016 Elsevier Ltd. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F.; Taylor-Pashow, K.
SRNL received two sets of SHT samples (MCU-14-667-672, pulled 8/27/2014 and MCU-14-846-847, pulled on 9/22/2014) for analysis. The samples were analyzed for composition. It is recommended that the solvent receives Isopar® L and TiDG trimming at this time. Analysis of sample MCU-14-846-847 indicates the solvent has evaporated Isopar®L and has lost TiDG to a level below the recommended minimum 1 mM level. Since the addition of MaxCalix to the SHT in early July 2014, the MaxCalix concentration in the solvent has reached nominal values. The laboratory will continue to monitor the quality of the solvent in particular for any newmore » impurity or degradation of the solvent components.« less
Occupational exposures and mammographic density in Spanish women.
Lope, Virginia; García-Pérez, Javier; Pérez-Gómez, Beatriz; Pedraza-Flechas, Ana María; Alguacil, Juan; González-Galarzo, Mª Carmen; Alba, Miguel Angel; van der Haar, Rudolf; Cortés-Barragán, Rosa Ana; Pedraz-Pingarrón, Carmen; Moreo, Pilar; Santamariña, Carmen; Ederra, María; Vidal, Carmen; Salas-Trejo, Dolores; Sánchez-Contador, Carmen; Llobet, Rafael; Pollán, Marina
2018-02-01
The association between occupational exposures and mammographic density (MD), a marker of breast cancer risk, has not been previously explored. Our objective was to investigate the influence of occupational exposure to chemical, physical and microbiological agents on MD in adult women. This is a population-based cross-sectional study based on 1476 female workers aged 45-65 years from seven Spanish breast cancer screening programmes. Occupational history was surveyed by trained staff. Exposure to occupational agents was assessed using the Spanish job-exposure matrix MatEmESp. Percentage of MD was measured by two radiologists using a semiautomatic computer tool. The association was estimated using mixed log-linear regression models adjusting for age, education, body mass index, menopausal status, parity, smoking, alcohol intake, type of mammography, family history of breast cancer and hormonal therapy use, and including screening centre and professional reader as random effects terms. Although no association was found with most of the agents, women occupationally exposed to perchloroethylene (e β =1.51; 95% CI 1.04 to 2.19), ionising radiation (e β =1.23; 95% CI 0.99 to 1.52) and mould spores (e β =1.44; 95% CI 1.01 to 2.04) tended to have higher MD. The percentage of density increased 12% for every 5 years exposure to perchloroethylene or mould spores, 11% for every 5 years exposure to aliphatic/alicyclic hydrocarbon solvents and 3% for each 5 years exposure to ionising radiation. Exposure to perchloroethylene, ionising radiation, mould spores or aliphatic/alicyclic hydrocarbon solvents in occupational settings could be associated with higher MD. Further studies are needed to clarify the accuracy and the reasons for these findings. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
Londoño-Velasco, Elizabeth; Martínez-Perafán, Fabián; Carvajal-Varona, Silvio; García-Vallejo, Felipe; Hoyos-Giraldo, Luz Stella
2016-05-01
Occupational exposure as a painter is associated with DNA damage and development of cancer. Comet assay has been widely adopted as a sensitive and quantitative tool for DNA damage assessment at the individual cell level in populations exposed to genotoxics. The aim of this study was to assess the application of the high-throughput comet assay, to determine the DNA damage in car spray painters. The study population included 52 car spray painters and 52 unexposed subjects. A significant increase in the %TDNA median (p < 0.001) was observed in the exposed group in comparison to the unexposed group. Neither age (%TDNA: p = 0.913) nor time of exposure (%TDNA: p = 0.398) were significantly correlated with DNA damage. The car spray painters who consumed alcohol did not show a significant increase in DNA damage compared to nonalcohol consumers (p > 0.05). The results showed an increase in DNA breaks in car spray painters exposed to organic solvents and paints; furthermore, they demonstrated the application of high-throughput comet assay in an occupational exposure study to genotoxic agents.
Behavioral effects of subchronic inhalation of toluene in adult rats.
Beasley, Tracey E; Evansky, Paul A; Gilbert, Mary E; Bushnell, Philip J
2010-01-01
Whereas the acute neurobehavioral effects of toluene are robust and well characterized, evidence for persistent effects of repeated exposure to this industrial solvent is less compelling. The present experiment sought to determine whether subchronic inhalation of toluene caused persistent behavioral changes in rats. Adult male Long-Evans rats inhaled toluene vapor (0, 10, 100, or 1000 ppm) for 6h/day, 5 days/week for 13 weeks and were evaluated on a series of behavioral tests beginning 3 days after the end of exposure. Toluene delayed appetitively-motivated acquisition of a lever-press response, but did not affect motor activity, anxiety-related behavior in the elevated plus maze, trace fear conditioning, acquisition of an appetitively-motivated visual discrimination, or performance of a visual signal detection task. Challenges with acute inhalation of toluene vapor (1200-2400 ppm for 1 h) and injections of quinpirole (0.01-0.03 mg/kg) and raclopride (0.03-0.10 mg/kg) revealed no toluene-induced latent impairments in visual signal detection. These results are consistent with a pattern of subtle and inconsistent long-term effects of daily exposure to toluene vapor, in contrast to robust and reliable effects of acute inhalation of the solvent. Published by Elsevier Inc.
Effects of polar solvents on the mechanical behavior of fish scales.
Murcia, Sandra; Li, Guihua; Yahyazadehfar, Mobin; Sasser, Mikaela; Ossa, Alex; Arola, D
2016-04-01
Fish scales are unique structural materials that serve as a form of natural armor. In this investigation the mechanical behavior of scales from the Cyprinus carpio was evaluated after exposure to a polar solvent. Uniaxial tensile and tear tests were conducted on specimens prepared from the scales of multiple fish extracted from near the head, middle and tail regions, and after exposure to ethanol for periods from 0 to 24h. Submersion in ethanol caused instantaneous changes in the tensile properties regardless of anatomical site, with increases in the elastic modulus, strength and modulus of toughness exceeding 100%. The largest increase in properties overall occurred in the elastic modulus of scales from the tail region and exceeded 200%. Although ethanol treatment had significant effect on the tensile properties, it had limited influence on the tear resistance. The contribution of ethanol to the mechanical behavior appears to be derived from an increase in the degree of interpeptide hydrogen-bonding of the collagen molecules. Spatial variations in the effects of ethanol exposure on the mechanical behavior arise from the differences in degree of mineralization and lower mineral content in scales of the tail region. Copyright © 2015 Elsevier B.V. All rights reserved.
Gliomas and exposure to wood preservatives.
Cordier, S; Poisson, M; Gerin, M; Varin, J; Conso, F; Hemon, D
1988-01-01
A case-referent study was undertaken to look for occupational risk factors among patients with glioma treated in a neurological hospital in Paris between 1975 and 1984. In the study group were 125 men with gliomas (aged less than or equal to 65) and 238 patients (also less than or equal to 65) admitted for non-neoplastic, non-malformative vascular diseases in the same department during the same period constituting the reference group. All diagnoses were confirmed by tomodensitometry. Information on occupational history was obtained from a postal questionnaire and from medical records. Comparison of cases and referents showed a significant excess risk among teachers (OR = 4.1) and a raised risk among wood workers (OR = 1.6). Four of nine cases of glioma who had been employed as wood workers reported that a colleague had suffered from glioma (those reports were confirmed by hospital records). None were reported among 11 referent wood workers. Using a complementary questionnaire on wood work, exposure assessment to wood preservatives and solvents showed that frequent exposure to organochlorine wood preservatives and to organic solvents occurred more often among cases than referent wood workers (p less than 0.10). PMID:3196664
2013-04-15
VAAR) was purchased from McGean. Hydrated basic magnesium carbonate was obtained from Pine Bluff Arsenal (Pine Bluff, AR) and was confirmed to be Mg5( CO3 ...a potential environmental exposure of approximately 29 g of the toxic yellow dyes throughout the life cycle of a single M194 signal! To mitigate this...consists of Solvent Yellow 33 as the smoke sublimating agent, hydrated basic magnesium carbonate (Mg5( CO3 )4(OH)2·4H2O) instead of sodium bicarbonate (NaHCO3
Method and apparatus for back-extracting metal chelates
Wai, Chien M.; Smart, Neil G.; Lin, Yuehe
1998-01-01
A method of extracting metal and metalloid species from a solid or liquid substrate using a supercritical fluid solvent containing one or more chelating agents followed by back-extracting the metal and metalloid species from the metal and metalloid chelates formed thereby. The back-extraction acidic solution is performed utilizing an acidic solution. Upon sufficient exposure of the metal and metalloid chelates to the acidic solution, the metal and metalloid species are released from the chelates into the acid solution, while the chelating agent remains in the supercritical fluid solvent. The chelating agent is thereby regenerated and the metal and metalloid species recovered.
Diankova, M
1998-09-01
A health risk evaluation of the lifetime population risk has been made, by using the US EPA's method of risk assessment. Several main steps have been conducted: --a hazard identification, by means of emission analysis and mathematical modeling of air concentration dispersion; a dose-response evaluation and exposure assessment, and finally--a risk characterization. The health risk evaluation was conducted, using lifetime reference concentrations and doses. As risk descriptors were applied: --the individual exposure coefficient (IEC), the hazard quotient (HQ) and the margin of exposure (MOE)--for system toxicants, and the excess lifetime cancer risk (ELCR)--for carcinogens. The method that was used provides an upperbound estimate, including all possible exposures. The results showed, that the emissions of hydrogen chloride, phthalates (DOF), nitrogen oxides and most of the organic solvents, released from this chemical plant, are not a source of lifetime chronic health risk for the population of any of the six evaluated residential areas of Rousse. The rest of the hazardous emissions cause a slightly increased lifetime health risk, which is entirely in the so called 'controlled risk zone' the risk descriptors vary from 1.00 to 5.00. A number of actions have been prescribed to the plant's government, most of which were realized in the short term.
The spectrosome of occupational health problems
de Gaudemaris, Régis; Bicout, Dominique J.
2018-01-01
Given the increased prevalence of cancer, respiratory diseases, and reproductive disorders, for which multifactorial origins are strongly suspected, the impact of the environment on the population represents a substantial public health challenge. Surveillance systems have become an essential public health decision-making tool. Networks have been constructed to facilitate the development of analyses of the multifactorial aspects of the relationships between occupational contexts and health. The aim of this study is to develop and present an approach for the optimal exploitation of observational databases to describe and improve the understanding of the (occupational) environment–health relationships, taking into account key multifactorial aspects. We have developed a spectral analysis (SA) approach that takes into account both the multi-exposure and dynamic natures of occupational health problems (OHPs) and related associations. The main results of this paper are to present the construction method of the “spectrum” and “spectrosome” of OHPs (range and structured list of occupational exposures) and describe the information contained therein with an illustrative example. The approach is illustrated using the case of non-Hodgkin lymphoma (NHL) from the French National Occupational Diseases Surveillance and Prevention Network database as a working example of an occupational disease. We found that the NHL spectrum includes 40 sets of occupational exposures characterized by important multi-exposures, especially solvent combinations or pesticide combinations, but also specific exposures such as polycyclic aromatic hydrocarbons, formaldehyde and ionizing radiation. These findings may be useful for surveillance and the assessment of occupational exposure related to health risks. PMID:29304043
Boussès, Christine; Ferey, Ludivine; Vedrines, Elodie; Gaudin, Karen
2015-11-10
An innovative combination of green chemistry and quality by design (QbD) approach is presented through the development of an UHPLC method for the analysis of the main degradation products of dextromethorphan hydrobromide. QbD strategy was integrated to the field of green analytical chemistry to improve method understanding while assuring quality and minimizing environmental impacts, and analyst exposure. This analytical method was thoroughly evaluated by applying risk assessment and multivariate analysis tools. After a scouting phase aimed at selecting a suitable stationary phase and an organic solvent in accordance with green chemistry principles, quality risk assessment tools were applied to determine the critical process parameters (CPPs). The effects of the CPPs on critical quality attributes (CQAs), i.e., resolutions, efficiencies, and solvent consumption were further evaluated by means of a screening design. A response surface methodology was then carried out to model CQAs as function of the selected CPPs and the optimal separation conditions were determined through a desirability analysis. Resulting contour plots enabled to establish the design space (DS) (method operable design region) where all CQAs fulfilled the requirements. An experimental validation of the DS proved that quality within the DS was guaranteed; therefore no more robustness study was required before the validation. Finally, this UHPLC method was validated using the concept of total error and was used to analyze a pharmaceutical drug product. Copyright © 2015 Elsevier B.V. All rights reserved.
Urinary metabolite levels and symptoms in Filipino workers using organic solvents.
Cucueco, M T; Espinosa, N C; Villanueva, M B; Castro, F T; Sison, S Y; Ortega, V S; Hisanaga, N
1993-01-01
To compare symptoms with urinary metabolite levels, 900 workers from 7 organic solvent-using industries were studied. Urinary metabolites were determined using a high performance liquid chromatograph. Urinary hippuric acid concentrations exceeding the reference value (2.5 g/g creatinine) were found in 78 (8.7%) workers. However, only 3 (0.3%) and 1 (0.1%) of the participants exceeded the reference value for mandelic (0.8 g/g creatinine) and total methylhippuric acid (1.5 g/g creatinine), respectively. The sum of the values of the ratio of measured urinary metabolite concentration to the corresponding ACGIH's biological exposure indices (BEI) [(HA/BEI of HA + MHA/BEI of MHA + MA/BEI of MA)] exceeded 1.0 in 166 (18.4%) workers. Majority of them were from the footwear manufacturing industry (63/129 or 49.2%). Questionnaire interviews were also administered to determine the prevalence of symptoms while at work (acute symptoms) or within the past 6 months (chronic symptoms). Urinary metabolite levels of individual and mixed solvents were compared with the symptoms of all workers. Analysis using Spearman's rank correlation showed in workers whose urinary hippuric acid exceeded 3.75 g/g creatine (1.5 x BEI), significant correlation between their hippuric acid levels and subjective complaints. Workers whose sum of the values of the ratio of measured urinary metabolite concentration to corresponding BEI exceeded 1.5 were selected and comparing this level with their symptoms, significant correlation was also noted in some complaints.
INHIBITORY EFFECTS OF PERCHLOROETHYLENE ON HUMAN NEURONAL NICOTINIC ACETYLCHOLINE RECEPTORS.
Perchloroethylene (PERC) is a volatile organic solvent with a variety of industrial uses. PERC exposure has been shown to cause adverse neurological effects including deficits in vision and memory in exposed individuals. Despite knowledge of these effects, the mechanisms by whi...
78 FR 1856 - Availability of Draft Chemical Risk Assessments; Public Comment Opportunity
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-09
... bioaccumulation, environmental risk assessment (aquatic and terrestrial), and analytical chemistry of organic... organics, experts on use of volatiles as solvent degreasers and in the arts/crafts field, chemical...: Exposure modeling, aquatic ecotoxicology, terrestrial ecotoxicology, inorganic chemistry addressing water...
GREENER CHEMICAL SYNTHESES USING ALTERNATIVE REACTION CONDITIONS AND MEDIA
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of recyclable mineral supports such as alumina, silica, clay, or 'doped' surfaces is presented which is applicable to a wide range of cleavage, condensation, cycl...
Approaches to extrapolating animal toxicity data on organic solvents to public health
Developing predictive relationships between exposure and toxicity in humans is difficult because 1) available data are usually derived from experimental animals whose sensitivity to the chemical relative to humans is unknown; 2) the specific neurotoxic endpoints measured in labor...
CHEMICAL SYNTHESES AND TRANSFORMATIONS UNDER NON-TRADITIONAL CONDITIONS
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of recyclable mineral supports such as alumina, silica, clay, or 'doped' surfaces is presented which is applicable to a wide range of cleavage, condensation, cycl...
‘Greener’ Chemical Syntheses Using Mechanochemical Mixing or Microwave and Ultrasound Irradiation
Various emerging ‘greener’ strategic pathways researched primarily in the author’s own laboratory are summarized. They include solvent-free mechanochemical methods and microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of less-expensive and recyclabl...
STORAGE STABILITY OF PESTICIDES IN EXTRACT SOLVENTS AND SAMPLING MEDIA
Demonstrating that pesticides are stable in field media and their extracts over extended storage periods allows operational flexibility and cost efficiency. Stability of the 31 neutral pesticides and 2 acid herbicides of the Agricultural Health Study exposure pilot was evaluate...
UV-Vis spectroscopy and solvatochromism of the tyrosine kinase inhibitor AG-1478
NASA Astrophysics Data System (ADS)
Khattab, Muhammad; Wang, Feng; Clayton, Andrew H. A.
2016-07-01
The effect of twenty-one solvents on the UV-Vis spectrum of the tyrosine kinase inhibitor AG-1478 was investigated. The absorption spectrum in the range 300-360 nm consisted of two partially overlapping bands at approximately 340 nm and 330 nm. The higher energy absorption band was more sensitive to solvent and exhibited a peak position that varied from 327 nm to 336 nm, while the lower energy absorption band demonstrated a change in peak position from 340 nm to 346 nm in non-chlorinated solvents. The fluorescence spectrum of AG-1478 was particularly sensitive to solvent. The wavelength of peak intensity varied from 409 nm to 495 nm with the corresponding Stokes shift in the range of 64 nm to 155 nm (4536 cm- 1 to 9210 cm- 1). We used a number of methods to assess the relationship between spectroscopic properties and solvent properties. The detailed analysis revealed that for aprotic solvents, the peak position of the emission spectrum in wavenumber scale correlated with the polarity (dielectric constant or ET(30)) of the solvent. In protic solvents, a better correlation was observed between the hydrogen bonding power of the solvent and the position of the emission spectrum. Moreover, the fluorescence quantum yields were larger in aprotic solvents as compared to protic solvents. This analysis underscores the importance of polarity and hydrogen-bonding environment on the spectroscopic properties of AG-1478. These studies will assume relevance in understanding the interaction of AG-1478 in vitro and in vivo.
Spirtas, R; Stewart, P A; Lee, J S; Marano, D E; Forbes, C D; Grauman, D J; Pettigrew, H M; Blair, A; Hoover, R N; Cohen, J L
1991-08-01
A retrospective cohort study of 14,457 workers at an aircraft maintenance facility was undertaken to evaluate mortality associated with exposures in their workplace. The purpose was to determine whether working with solvents, particularly trichloroethylene, posed any excess risk of mortality. The study group consisted of all civilian employees who worked for at least one year at Hill Air Force Base, Utah, between 1 January 1952 and 31 December 1956. Work histories were obtained from records at the National Personnel Records Centre, St. Louis, Missouri, and the cohort was followed up for ascertainment of vital state until 31 December 1982. Observed deaths among white people were compared with the expected number of deaths, based on the Utah white population, and adjusted for age, sex, and calendar period. Significant deficits occurred for mortality from all causes (SMR 92, 95% confidence interval (95% CI) 90-95), all malignant neoplasms (SMR 90, 95% CI 83-97), ischaemic heart disease (SMR 93, 95% CI 88-98), non-malignant respiratory disease (SMR 87, 95% CI 76-98), and accidents (SMR 61, 95% CI 52-70). Mortality was raised for multiple myeloma (MM) in white women (SMR 236, 95% CI 87-514), non-Hodgkin's lymphoma (NHL) in white women (SMR 212, 95% CI 102-390), and cancer of the biliary passages and liver in white men dying after 1980 (SMR 358, 95% CI 116-836). Detailed analysis of the 6929 employees occupationally exposed to trichloroethylene, the most widely used solvent at the base during the 1950s and 1960s, did not show any significant or persuasive association between several measures of exposure to trichloroethylene and any excess of cancer. Women employed in departments in which fabric cleaning and parachute repair operations were performed had more deaths than expected from MM and NHL. The inconsistent mortality patterns by sex, multiple and overlapping exposures, and small numbers made it difficult to ascribe these excesses to any particular substance. Hypothesis generating results are presented by a variety of exposures for causes of death not showing excesses in the overall cohort.
Spirtas, R; Stewart, P A; Lee, J S; Marano, D E; Forbes, C D; Grauman, D J; Pettigrew, H M; Blair, A; Hoover, R N; Cohen, J L
1991-01-01
A retrospective cohort study of 14,457 workers at an aircraft maintenance facility was undertaken to evaluate mortality associated with exposures in their workplace. The purpose was to determine whether working with solvents, particularly trichloroethylene, posed any excess risk of mortality. The study group consisted of all civilian employees who worked for at least one year at Hill Air Force Base, Utah, between 1 January 1952 and 31 December 1956. Work histories were obtained from records at the National Personnel Records Centre, St. Louis, Missouri, and the cohort was followed up for ascertainment of vital state until 31 December 1982. Observed deaths among white people were compared with the expected number of deaths, based on the Utah white population, and adjusted for age, sex, and calendar period. Significant deficits occurred for mortality from all causes (SMR 92, 95% confidence interval (95% CI) 90-95), all malignant neoplasms (SMR 90, 95% CI 83-97), ischaemic heart disease (SMR 93, 95% CI 88-98), non-malignant respiratory disease (SMR 87, 95% CI 76-98), and accidents (SMR 61, 95% CI 52-70). Mortality was raised for multiple myeloma (MM) in white women (SMR 236, 95% CI 87-514), non-Hodgkin's lymphoma (NHL) in white women (SMR 212, 95% CI 102-390), and cancer of the biliary passages and liver in white men dying after 1980 (SMR 358, 95% CI 116-836). Detailed analysis of the 6929 employees occupationally exposed to trichloroethylene, the most widely used solvent at the base during the 1950s and 1960s, did not show any significant or persuasive association between several measures of exposure to trichloroethylene and any excess of cancer. Women employed in departments in which fabric cleaning and parachute repair operations were performed had more deaths than expected from MM and NHL. The inconsistent mortality patterns by sex, multiple and overlapping exposures, and small numbers made it difficult to ascribe these excesses to any particular substance. Hypothesis generating results are presented by a variety of exposures for causes of death not showing excesses in the overall cohort. PMID:1878308
Unfolding of a model protein on ion exchange and mixed mode chromatography surfaces.
Gospodarek, Adrian M; Hiser, Diana E; O'Connell, John P; Fernandez, Erik J
2014-08-15
Recent studies with proteins indicate that conformational changes and aggregation can occur during ion exchange chromatography (IEC). Such behavior is not usually expected, but could lead to decreased yield and product degradation from both IEC and multi mode chromatography (MMC) that has ligands of both hydrophobic and charged functionalities. In this study, we used hydrogen exchange mass spectrometry to investigate unfolding of the model protein BSA on IEC and MMC surfaces under different solution conditions at 25°C. Increased solvent exposure, indicating greater unfolding relative to that in solution, was found for protein adsorbed on cationic IEC and MMC surfaces in the pH range of 3.0 to 4.5, where BSA has decreased stability in solution. There was no effect of anionic surfaces at pH values in the range from 6.0 to 9.0. Differences of solvent exposure of whole molecules when adsorbed and in solution suggest that adsorbed BSA unfolds at lower pH values and may show aggregation, depending upon pH and the surface type. Measurements on digested peptides showed that classifications of stability can be made for various regions; these are generally retained as pH is changed. When salt was added to MMC systems, where electrostatic interactions would be minimized, less solvent exposure was seen, implying that it is the cationic moieties, rather than the hydrophobic ligands, which cause greater surface unfolding at low salt concentrations. These results suggest that proteins of lower stability may exhibit unfolding and aggregation during IEC and MMC separations, as they can with hydrophobic interaction chromatography. Copyright © 2014 Elsevier B.V. All rights reserved.
Solvent hold tank sample results for MCU-15-914-915-916. December 2015 Monthly sample
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F. F.; Jones, D. H.
2016-03-01
Savannah River National Laboratory (SRNL) received one set of Solvent Hold Tank (SHT) samples (MCU-15-914-915-916), pulled on 12/22/2015 for analysis. The samples were combined and analyzed for composition. Analysis of the composite sample MCU-15-914-915-916 indicated the TiDG, Isopar™L, and MaxCalix are at nominal levels. The modifier concentration is 3% below its nominal concentration. This analysis confirms the addition of TiDG, MaxCalix, and modifier to the solvent in November 2015. Based on the current monthly sample, the levels of TiDG, Isopar™L, MaxCalix, and modifier are sufficient for continuing operation but are expected to decrease with time. Periodic characterization and trimming additionsmore » to the solvent are recommended. No impurities above the 1000 ppm level were found in this solvent by the Semi-Volatile Organic Analysis (SVOA). No impurities were observed in the Hydrogen Nuclear Magnetic Resonance (HNMR). However, the Fourier transform infra-red spectroscopy (FTIR) method detected trace levels (a few ppm) of amides (more indicative of bacteria than a possible degradation product of TiDG). In addition, up to 18 ± 4 micrograms of mercury per gram of solvent (or 14.8 μg/mL) was detected in this sample. The current gamma concentration level (8.48E4 dpm/mL) confirmed that the gamma concentration has returned to the previous level where the process operated normally as expected. The laboratory will continue to monitor the quality of the solvent in particular for any new impurities or degradation of the solvent components.« less
Recovery, Reuse, and Recycle of Solvents.
1985-12-01
Program ------------------------------------------------------ 1I In e t v s P o r m - - - - - - - - - - - - - - - - - - - - - - - - Soncentves Pr ogram...not known. . . ,o. .’* • . .~i 8 A M FIGURE 1 WORKSHEET FOR DETERMINING WASTE SOLVENT ECONOMIC ANALYSIS Activity/Complex: Preparer:_________ Location...annual f. operating cost of $890 18 V-7 C.6 M . SOLVENT RENTAL APPLICATIONS Solvent rental may be the most cost effective method for complying with both
Tom, Justin; Jakubec, Philip J; Andreas, Heather A
2018-05-01
Exposing a carbon electrode to hemoglobin (Hb) and alcoholic solvents, such as methanol, ethanol or 1-propanol, drastically changes Hb electroactivity, but until this work, the important underlying mechanisms were unclear. For the first time, we show that these alcohols impact Hb electroactivity via three mechanisms: modification of the carbon surface oxides on the glassy carbon (GC) electrode, Hb film formation, and structural changes to Hb. C 1s X-ray photoelectron spectroscopy provided evidence for significant alcohol-induced modification of the carbon surface oxides, and differential pulse voltammetry showed links between these modifications and Hb electroactivity. Spectroscopic ellipsometry showed that Hb films formed during exposure to Hb- and alcohol-containing electrolytes increased in thickness with increasing alcohol content, although film thickness played only a minor role in Hb electroactivity. Alcohol-induced structural changes in Hb are confirmed with UV-visible absorption and fluorescence data, showing that Hb denaturation also was a significant factor in increasing Hb electroactivity. Carbon-surface-oxide modification and Hb denaturation worked in tandem to maximally increase the Hb electroactivity in 60% methanol. While in ethanol and 1-propanol, the significant increases in Hb electroactivity caused by Hb denaturation were offset by an increase in Hb-inhibiting carbon surface oxides. Knowledge of these mechanisms shows the impact of alcohols on both Hb and carbon electrodes, allows for thoughtful design of the Hb-sensing system, is vital for proper analysis of Hb electroactivity in the presence of these alcohols (e.g., when used as binder solvents for immobilizing Hb into films), and provides fundamental understanding of the Hb-carbon interactions.
Microcapsules fabricated from liquid marbles stabilized with latex particles.
Ueno, Kazuyuki; Hamasaki, Sho; Wanless, Erica J; Nakamura, Yoshinobu; Fujii, Syuji
2014-03-25
Millimeter- and centimeter-sized "liquid marbles" were readily prepared by rolling water droplets on a powder bed of dried submicrometer-sized polystyrene latex particles carrying poly[2-(diethylamino)ethyl methacrylate] hairs (PDEA-PS). Scanning electron microscopy studies indicated that flocs of the PDEA-PS particles were adsorbed at the surface of these water droplets, leading to stable spherical liquid marbles. The liquid marbles were deformed as a result of water evaporation to adopt a deflated spherical geometry, and the rate of water evaporation decreased with increasing atmospheric relative humidity. Conversely, liquid marbles formed using saturated aqueous LiCl solution led to atmospheric water absorption by the liquid marbles and a consequent mass increase. The liquid marbles can be transformed into polymeric capsules containing water by exposure to solvent vapor: the PDEA-PS particles were plasticized with the solvent vapor to form a polymer film at the air-water interface of the liquid marbles. The polymeric capsules with aqueous volumes of 250 μL or less kept their oblate ellipsoid/near spherical shape even after complete water evaporation, which confirmed that a rigid polymeric capsule was successfully formed. Both the rate of water evaporation from the pure water liquid marbles and the rate of water adsorption into the aqueous LiCl liquid marbles were reduced with an increase of solvent vapor treatment time. This suggests that the number and size of pores within the polymer particles/flocs on the liquid marble surface decreased due to film formation during exposure to organic solvent vapor. In addition, organic-inorganic composite capsules and colloidal crystal capsules were fabricated from liquid marbles containing aqueous SiO2 dispersions.
Håkansson, N; Stenlund, C; Gustavsson, P; Johansen, C; Floderus, B
2005-05-01
Mechanisms for potential effects of extremely low frequency (ELF) magnetic fields on carcinogenesis have not been identified. A potential pathway could be an interaction with the endocrine system. To analyse occupational exposure to ELF magnetic fields from welding, and tumours of the endocrine glands. This case-control study was based on a cohort with an increased prevalence of high exposed individuals. A total of 174 incident cases of tumours of the endocrine glands, 1985-94, were identified and data were obtained from 140 (80%) of these cases; 1692 controls frequency matched on sex and age were selected, and information on 1306 (77%) individuals was obtained. A short questionnaire was sent to a work administrator at the workplaces of the cases and controls. The exposure assessment was based on questions about job tasks, exposure to different types of welding, and exposure to solvents. There was an overall increased risk for all tumours of the endocrine glands for individuals who had been welding sometime during the follow up. The increased risk was attributable to arc welding; for resistance welding there was no clear evidence of an association. We found an increased risk for the adrenal glands in relation to arc welding, and for the parathyroid glands in relation to both arc welding and resistance welding. An imprecise increase in risk was also noted for tumours of the pituitary gland for arc welding. No confounding effect was found for solvent exposure, and there was no sign of biological interaction. The increased risks of endocrine gland tumours related to welding might be explained by exposure to high levels of ELF magnetic fields.
Hakansson, N; Stenlund, C; Gustavsson, P; Johansen, C; Floderus, B
2005-01-01
Background: Mechanisms for potential effects of extremely low frequency (ELF) magnetic fields on carcinogenesis have not been identified. A potential pathway could be an interaction with the endocrine system. Aims: To analyse occupational exposure to ELF magnetic fields from welding, and tumours of the endocrine glands. Methods: This case-control study was based on a cohort with an increased prevalence of high exposed individuals. A total of 174 incident cases of tumours of the endocrine glands, 1985–94, were identified and data were obtained from 140 (80%) of these cases; 1692 controls frequency matched on sex and age were selected, and information on 1306 (77%) individuals was obtained. A short questionnaire was sent to a work administrator at the workplaces of the cases and controls. The exposure assessment was based on questions about job tasks, exposure to different types of welding, and exposure to solvents. Results: There was an overall increased risk for all tumours of the endocrine glands for individuals who had been welding sometime during the follow up. The increased risk was attributable to arc welding; for resistance welding there was no clear evidence of an association. We found an increased risk for the adrenal glands in relation to arc welding, and for the parathyroid glands in relation to both arc welding and resistance welding. An imprecise increase in risk was also noted for tumours of the pituitary gland for arc welding. No confounding effect was found for solvent exposure, and there was no sign of biological interaction. Conclusion: The increased risks of endocrine gland tumours related to welding might be explained by exposure to high levels of ELF magnetic fields. PMID:15837851
Jiménez-Garza, Octavio; Guo, Liqiong; Byun, Hyang-Min; Carrieri, Mariella; Bartolucci, Giovanni Battista; Zhong, Jia; Baccarelli, Andrea A
2017-11-01
Exposure to low levels of benzene may cause acute myeloid leukemia in humans. Epigenetic effects in benzene exposure have been studied for tumor suppressor genes and oxidative stress-related genes, but other cellular pathways must be explored. Here, we studied promoter DNA methylation of IL6, CYP2E1 and iNOS in blood cells from three groups of workers: a) gas station attendants (GS) exposed to low levels of benzene; b) plastic shoe factory workers (PS) exposed to other solvents different to benzene and c) administrative workers as a reference group with no solvent exposure (C). IL6 promoter methylation was higher in GS workers (p < 0.05). Also in GS, CYP2E1 promoter methylation negatively correlated with benzene levels (r = -0.47, p < 0.05); iNOS promoter methylation positively correlated with CYP2E1 promoter methylation (r = 0.29, p < 0.05), cumulative time of exposure (r = 0.31, p < 0.05) as well as with urinary levels of S- Phenyl mercapturic acid (SPMA), (r = 0.55, p < 0.05). Our results demonstrate alterations in the inflammation pathway at the epigenetic level associated with exposure to benzene. Correlations between iNOS methylation with both CYP2E1 methylation and urinary SPMA levels represent novel evidence about CYP2E1 epigenetic regulation and activity related with nitrosative stress, making promoter methylation status of these genes a potential biomarker in early stages of oncogenesis. Copyright © 2017 Elsevier Ltd. All rights reserved.
Preconception Brief: Occupational/Environmental Exposures
Gehle, Kim
2006-01-01
In the last decade, more than half of U.S. children were born to working mothers and 65% of working men and women were of reproductive age. In 2004 more than 28 million women age 18–44 were employed full time. This implies the need for clinicians to possess an awareness about the impact of work on the health of their patients and their future offspring. Most chemicals in the workplace have not been evaluated for reproductive toxicity, and where exposure limits do exist, they were generally not designed to mitigate reproductive risk. Therefore, many toxicants with unambiguous reproductive and developmental effects are still in regular commercial or therapeutic use and thus present exposure potential to workers. Examples of these include heavy metals, (lead, cadmium), organic solvents (glycol ethers, percholoroethylene), pesticides and herbicides (ethylene dibromide) and sterilants, anesthetic gases and anti-cancer drugs used in healthcare. Surprisingly, many of these reproductive toxicants are well represented in traditional employment sectors of women, such as healthcare and cosmetology. Environmental exposures also figure prominently in evaluating a woman’s health risk and that to a pregnancy. Food and water quality and pesticide and solvent usage are increasingly topics raised by women and men contemplating pregnancy. The microenvironment of a woman, such as her choices of hobbies and leisure time activities also come into play. Caregivers must be aware of their patients’ potential environmental and workplace exposures and weigh any risk of exposure in the context of the time-dependent window of reproductive susceptibility. This will allow informed decision-making about the need for changes in behavior, diet, hobbies or the need for added protections on the job or alternative duty assignment. Examples of such environmental and occupational history elements will be presented together with counseling strategies for the clinician. PMID:16897370
GREENER CHEMICAL SYNTHESES USING ALTERNATIVE REACTION CONDITIONS AND MEDIA (MARCH 2006)
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of recyclable mineral supports such as alumina, silica, clay, or ‘doped’ surfaces is presented which is applicable to a wide range of cleavage, conden...
Phillips, Jennan A
2018-02-01
Methylene chloride is an industrial solvent used in commercial paint strippers and degreasing agents. This chemical is widely used in consumer products, yet without appropriate protections, exposure may lead to death. Already banned in some countries, the Environmental Protection Agency (EPA) recently proposed limiting its use in the United States.
"GREENER" CHEMICAL SYNTHESES USING AN ALTERNATE REACTION CONDITIONS OR AQUEOUS MEDIA
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of recyclable mineral supports such as alumina, silica, clay, or 'doped' surfaces is presented which is applicable to a wide range of cleavage, condensation, cycl...
GREENER CHEMICAL SYNTHESES USING ALTERNATIVE REACTION CONDITIONS AND MEDIA (BRAZIL 2006)
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of recyclable mineral supports such as alumina, silica, clay, or 'doped' surfaces is presented which is applicable to a wide range of cleavage, condensation, cycl...
MICROWAVES: FROM MYTH, MYSTERY AND MAGIC TO A FAST-MOVING FRONTIER
A historical account of the utility of microwaves in a variety of chemical applications will be highlighted including solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of recyclable mineral supports such as alumina...
ENVIRONMENTALLY FRIENDLIER SYNTHESES USING MICROWAVES AND ALTERNATIVE REACTION MEDIA
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of less-expensive and recyclable mineral supports such as alumina, silica, clay, or "doped" surfaces is presented which is applicable to a wide range of cleavage,...
ENVIRONMENTALLY FRIENDLIER SYNTHESES USING MICROWAVES AND ALTERNATIVE REACTION CONDITIONS
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of less-expensive and recyclable mineral supports such as alumina, silica, clay, or doped surfaces is presented which is applicable to a wide range of cleavage, c...
‘GREENER’ ORGANIC SYNTHESES UNDER NON-TRADITIONAL CONDITIONS
A solvent-free approach that involves microwave (MW) exposure of neat reactants (undiluted) catalyzed by the surfaces of less-expensive and recyclable mineral supports such as alumina, silica, clay, or ‘doped’ surfaces is presented which is applicable to a wide range of cleavage,...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F. F.; Jones, D. H.
Savannah River National Laboratory (SRNL) received one set of three Solvent Hold Tank (SHT) samples (MCU-16-1363-1364-1365), pulled on 11/15/2016 for analysis. The samples were combined and analyzed for composition. Analysis of the composite sample MCU-16-1363-1364-1365 indicated the Isopar™L concentration is at its nominal level (100%). The extractant (MaxCalix) and the modifier (CS- 7SB) are 8% and 2 % below their nominal concentrations. The suppressor (TiDG) is 7% below its nominal concentration. This analysis confirms the trim and Isopar™ additions to the solvent in November. This analysis also indicates the solvent did not require further additions. Based on the current monthlymore » sample, the levels of TiDG, Isopar™L, MaxCalix, and modifier are sufficient for continuing operation but are expected to decrease with time. Periodic characterization and trimming additions to the solvent are recommended.« less
NASA Astrophysics Data System (ADS)
Su, Feng-Chiao; Mukherjee, Bhramar; Batterman, Stuart
2011-09-01
Exposures to volatile organic compounds (VOCs) are ubiquitous due to emissions from personal, commercial and industrial products, but quantitative and representative information regarding long term exposure trends is lacking. This study characterizes trends from 1988 to 2004 for the 15 VOCs measured in blood in five cohorts of the National Health and Nutrition Examination Survey (NHANES), a large and representative sample of U.S. adults. Trends were evaluated at various percentiles using linear quantile regression (QR) models, which were adjusted for solvent-related occupations and cotinine levels. Most VOCs showed decreasing trends at all quantiles, e.g., median exposures declined by 2.5 (m,p-xylene) to 6.4 (tetrachloroethene) percent per year over the 15 year period. Trends varied by VOC and quantile, and were grouped into three patterns: similar decreases at all quantiles (including benzene, toluene); most rapid decreases at upper quantiles (ethylbenzene, m,p-xylene, o-xylene, styrene, chloroform, tetrachloroethene); and fastest declines at central quantiles (1,4-dichlorobenzene). These patterns reflect changes in exposure sources, e.g., upper-percentile exposures may result mostly from occupational exposure, while lower percentile exposures arise from general environmental sources. Both VOC emissions aggregated at the national level and VOC concentrations measured in ambient air also have declined substantially over the study period and are supportive of the exposure trends, although the NHANES data suggest the importance of indoor sources and personal activities on VOC exposures. While piecewise QR models suggest that exposures of several VOCs decreased little or any during the 1990's, followed by more rapid decreases from 1999 to 2004, questions are raised concerning the reliability of VOC data in several of the NHANES cohorts and its applicability as an exposure indicator, as demonstrated by the modest correlation between VOC levels in blood and personal air collected in the 1999/2000 cohort. Despite some limitations, the NHANES data provides a unique, long term and direct measurement of VOC exposures and trends.
Hopf, Nancy B; Ruder, Avima M; Waters, Martha A
2014-05-01
We developed a semiquantitative job exposure matrix (JEM) for workers exposed to polychlorinated biphenyls (PCBs) at a capacitor manufacturing plant from 1946 to 1977. In a recently updated mortality study, mortality of prostate and stomach cancer increased with increasing levels of cumulative exposure estimated with this JEM (trend p values = 0.003 and 0.04, respectively). Capacitor manufacturing began with winding bales of foil and paper film, which were placed in a metal capacitor box (pre-assembly), and placed in a vacuum chamber for flood-filling (impregnation) with dielectric fluid (PCBs). Capacitors dripping with PCB residues were then transported to sealing stations where ports were soldered shut before degreasing, leak testing, and painting. Using a systematic approach, all 509 unique jobs identified in the work histories were rated by predetermined process- and plant-specific exposure determinants; then categorized based on the jobs' similarities (combination of exposure determinants) into 35 job exposure categories. The job exposure categories were ranked followed by a qualitative PCB exposure rating (baseline, low, medium, and high) for inhalation and dermal intensity. Category differences in other chemical exposures (solvents, etc.) prevented further combining of categories. The mean of all available PCB concentrations (1975 and 1977) for jobs within each intensity rating was regarded as a representative value for that intensity level. Inhalation (in microgram per cubic milligram) and dermal (unitless) exposures were regarded as equally important. Intensity was frequency adjusted for jobs with continuous or intermittent PCB exposures. Era-modifying factors were applied to the earlier time periods (1946-1974) because exposures were considered to have been greater than in later eras (1975-1977). Such interpolations, extrapolations, and modifying factors may introduce non-differential misclassification; however, we do believe our rigorous method minimized misclassification, as shown by the significant exposure-response trends in the epidemiologic analysis.
Effects of industrial effluents, heavy metals, and organic solvents on mallard embryo development.
Hoffman, D J; Eastin, W C
1981-09-01
Mallard eggs were externally exposed at 3 and 8 days of incubation to 7 different industrial effluents and to 7 different heavy metal, organic solvent, and petroleum solutions to screen for potential embryo-toxic effects. This route of exposure was chosen in order to simulate the transfer of pollutant from the plumage of aquatic birds to their eggs. Five of the effluents including mineral pigment, scouring effluent, sludge, and tannery effluent resulted in small but significant reductions in embryonic growth. Treatment with methyl mercury chloride solution of 50 ppm (Hg) impaired embryonic growth but much higher concentrations were required to affect survival and cause teratogenic effects. Oil used to suppress road dust was the most toxic of the pollutants tested and only 0.5 microliter/egg caused 60% mortality by 18 days of development. These findings, in combination with other studies suggest that petroleum pollutants, or effluents in combination with petroleum, may pose a hazard to birds' eggs when exposure is by this route.
Effects of industrial effluents, heavy metals, and organic solvents on mallard embryo development
Hoffman, D.J.; Eastin, W.C.
1981-01-01
Mallard eggs were externally exposed at 3 and 8 days of incubation to 7 different industrial effluents and to 7 different heavy metal, organic solvent, and petroleum solutions to screen for potential embryo-toxic effects. This route of exposure was chosen in order to simulate the transfer of pollutant from the plumage of aquatic birds to their eggs. Five of the effluents including mineral pigment, scouring effluent, sludge, and tannery effluent resulted in small but significant reductions in embryonic growth. Treatment with methyl mercury chloride solution of 50 ppm (Hg) impaired embryonic growth but much higher concentrations were required to affect survival and cause teratogenic effects. Oil used to suppress road dust was the most toxic of the pollutants tested and only 0.5 microliter/egg caused 60% mortality by 18 days of development. These findings, in combination with other studies suggest that petroleum pollutants, or effluents in combination with petroleum, may pose a hazard to birds' eggs when exposure is by this route.
Tsarpali, Vasiliki; Dailianis, Stefanos
2015-07-01
The main goal of this study was to investigate the toxicity of the imidazolium-based ionic liquids (ILs), [bmim][BF4] (1-butyl-3-methylimidazolium tetrafluoroborate) and [omim][BF4] (1-octyl-3-methylimidazolium tetrafluoroborate), in battery of standard aquatic toxicity test organisms. Specifically, exposure of the algae Scenedesmus rubescens, crustaceans Thamnocephalus platyurus and Artemia franciscana, rotifers Brachionus calyciflorus and Brachionus plicatilis and bivalve Mytilus galloprovincialis to different concentrations of [bmim][BF4], [omim][BF4] and/or a binary mixture of [bmim][BF4]-[omim][BF4] (1:1) with or without acetone (carrier solvent), revealed that solvent can differentially mediate ILs' toxic profile. Acetone's ability to differentially affect ILs' cation's alkyl chain length, as well as the hydrolysis of [BF4(-)] anions was evident. Given that the toxic potency of the tested ILs seemed to be equal or even higher (in some cases) than those of conventional organic solvents, the present study revealed that the characterization of imidazolium-based ILs as "green solvents" should not be generalized, at least in case of their natural occurrence in mixtures with organic solvents, such as acetone. Copyright © 2015 Elsevier Inc. All rights reserved.
A LITERATURE REVIEW OF WIPE SAMPLING METHODS ...
Wipe sampling is an important technique for the estimation of contaminant deposition in buildings, homes, or outdoor surfaces as a source of possible human exposure. Numerousmethods of wipe sampling exist, and each method has its own specification for the type of wipe, wetting solvent, and determinative step to be used, depending upon the contaminant of concern. The objective of this report is to concisely summarize the findings of a literature review that was conducted to identify the state-of-the-art wipe sampling techniques for a target list of compounds. This report describes the methods used to perform the literature review; a brief review of wipe sampling techniques in general; an analysis of physical and chemical properties of each target analyte; an analysis of wipe sampling techniques for the target analyte list; and asummary of the wipe sampling techniques for the target analyte list, including existing data gaps. In general, no overwhelming consensus can be drawn from the current literature on how to collect a wipe sample for the chemical warfare agents, organophosphate pesticides, and other toxic industrial chemicals of interest to this study. Different methods, media, and wetting solvents have been recommended and used by various groups and different studies. For many of the compounds of interest, no specific wipe sampling methodology has been established for their collection. Before a wipe sampling method (or methods) can be established for the co
Influence of sample processing on the analysis of carotenoids in maize.
Rivera, Sol; Canela, Ramon
2012-09-21
We performed a number of tests with the aim to develop an effective extraction method for the analysis of carotenoid content in maize seed. Mixtures of methanol-ethyl acetate (6:4, v/v) and methanol-tetrahydrofuran (1:1, v/v) were the most effective solvent systems for carotenoid extraction from maize endosperm under the conditions assayed. In addition, we also addressed sample preparation prior to the analysis of carotenoids by liquid chromatography (LC). The LC response of extracted carotenoids and standards in several solvents was evaluated and results were related to the degree of solubility of these pigments. Three key factors were found to be important when selecting a suitable injection solvent: compatibility between the mobile phase and injection solvent, carotenoid polarity and content in the matrix.
Exposure to Tetrachloroethylene-Contaminated Drinking Water and the Risk of Pregnancy Loss
Aschengrau, Ann; Weinberg, Janice M.; Gallagher, Lisa G.; Winter, Michael R.; Vieira, Veronica M.; Webster, Thomas F.; Ozonoff, David M.
2010-01-01
There is little information on the impact of solvent-contaminated drinking water on pregnancy outcomes. This retrospective cohort study examined whether maternal exposure to tetrachloroethylene (PCE) - contaminated drinking water in the Cape Cod region of Massachusetts influenced the risk of clinically recognized pregnancy loss. The study identified exposed (n=959) and unexposed (1,087) women who completed a questionnaire on their residential and pregnancy histories, and confounding variables. Exposure was estimated using water distribution system modeling software. No meaningful associations were seen between PCE exposure level and the risk of clinically recognized pregnancy loss at the exposure levels experienced by the study population. Because PCE remains a common water contaminant, it is important to continue monitoring its impact on women and their pregnancies. PMID:20613966
Effect of solvent on the synthesis of SnO{sub 2} nanoparticles
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kumar, Virender; Singh, Karamjit; Singh, Kulwinder
Tin oxide (SnO{sub 2}) nanoparticles have been synthesized by co-precipitation method. The synthesized nanoparticles have been characterized by X-ray diffraction (XRD) and Ultraviolet-Visible spectroscopy (UV-VIS). XRD analysis confirmed the formation of single phase of SnO{sub 2} nanoparticles. It has been found that solvents played important role in controlling the crystallite size of SnO{sub 2} nanoparticles. The XRD analysis showed well crystallized tetragonal SnO{sub 2} nanoparticles. The crystallite size of SnO{sub 2} nanoparticles varies with the solvent. Tauc plot showed that optical band gap was also tailored by controlling the solvent during synthesis.
Dynamic nuclear polarization in solid samples by electrical-discharge-induced radicals
NASA Astrophysics Data System (ADS)
Katz, Itai; Blank, Aharon
2015-12-01
Dynamic nuclear polarization (DNP) is a method for enhancing nuclear magnetic resonance (NMR) signals that has many potential applications in chemistry and medicine. Traditionally, DNP signal enhancement is achieved through the use of exogenous radicals mixed in a solution with the molecules of interest. Here we show that proton DNP signal enhancements can be obtained for solid samples without the use of solvent and exogenous radicals. Radicals are generated primarily on the surface of a solid sample using electrical discharges. These radicals are found suitable for DNP. They are stable under moderate vacuum conditions, yet readily annihilate upon compound dissolution or air exposure. This feature makes them attractive for use in medical applications, where the current variety of radicals used for DNP faces regulatory problems. In addition, this solvent-free method may be found useful for analytical NMR of solid samples which cannot tolerate solvents, such as certain pharmaceutical products.
Microcapsules and Methods for Making
NASA Technical Reports Server (NTRS)
Morrison, Dennis R. (Inventor); Mosier, Benjamin (Inventor)
1998-01-01
Methods of forming multi-lamellar microcapsules having alternating layers of hydrophilic and hydrophobic immiscible liquid phases have been developed using different polymer/solvent systems. The methods use liquid-liquid diffusion and simultaneous lateral phase separation, controlled by proper timed-sequence exposures of immiscible phases and low shear mixing, to form narrow size distributions of spherical, multilamellar microcapsules. The use of special formulations of solubilized drugs, surfactants, and polymeric co-surfactants in aqueous vehicles which are dispersed in hydrocarbon solvents containing small quantities of oil, low molecular weight co-surfactants and glycerides that are aqueous insoluble enables the formation of unique microcapsules which can carry large amounts of pharmaceuticals in both aqueous and non-aqueous solvent compartments. The liquid microcapsules are quickly formed in a single step and can include a polymeric outer 'skin' which protects the microcapsules during physical manipulation or exposure to high shear forces. Water-in-oil and oil-in-water microcapsules have been formed both in 1 x g and in microgravity, which contain several types of drugs co-encapsulated within different fluid compartments inside the same microcapsule. Large, spherical multi-lamellar microcapsules have been formed including a cytotoxic drug co-encapsulated with a radiocontrast medium which has advantages for chemoembolization of vascular tumors. In certain cases, crystals of the drug form inside the microcapsules providing zero-order and first order, sustained drug release kinetics.
Assessing color vision loss among solvent-exposed workers.
Mergler, D; Blain, L
1987-01-01
Acquired color vision loss has been associated with exposure to organic solvents in the workplace. However, not all tests of chromatic discrimination loss are designed to detect acquired, as opposed to congenital, loss. The Lanthony D-15 desaturated panel (D-15-d), a simple 15 cap color arrangement test, designed to identify mild acquired dyschromatopsia, can be administered rapidly in the field, under standard conditions. The objective of the present study was to evaluate the D-15-d among 23 solvent-exposed workers of a paint manufacturing plant, by comparing the results obtained with the D-15-d to those obtained with the Farnsworth-Munsell 100 Hue (FM-100), a highly sensitive measure of color vision loss. The D-15-d revealed a significantly higher prevalence of dyschromatopsia among the ten highly exposed workers (80%) as compared to the 13 moderately exposed workers (30.8%); FM-100 results revealed one false positive. All dyschromatopic workers presented blue-yellow loss; the FM-100 detected eight complex patterns, while the D-15-d identified 5. Comparison of D-15-d and FM-100 scores were highly correlated (corr. coeff. 0.87; p less than 0.001). Multiple regression analyses showed both scores to be significantly related to age and exposure level. The findings of this study indicate that the D-15-d is an adequate instrument for field study batteries. However, the FM-100 should be used for more detailed assessment.
Exposure to Organic Solvents Used in Dry Cleaning Reduces Low and High Level Visual Function
Jiménez Barbosa, Ingrid Astrid
2015-01-01
Purpose To investigate whether exposure to occupational levels of organic solvents in the dry cleaning industry is associated with neurotoxic symptoms and visual deficits in the perception of basic visual features such as luminance contrast and colour, higher level processing of global motion and form (Experiment 1), and cognitive function as measured in a visual search task (Experiment 2). Methods The Q16 neurotoxic questionnaire, a commonly used measure of neurotoxicity (by the World Health Organization), was administered to assess the neurotoxic status of a group of 33 dry cleaners exposed to occupational levels of organic solvents (OS) and 35 age-matched non dry-cleaners who had never worked in the dry cleaning industry. In Experiment 1, to assess visual function, contrast sensitivity, colour/hue discrimination (Munsell Hue 100 test), global motion and form thresholds were assessed using computerised psychophysical tests. Sensitivity to global motion or form structure was quantified by varying the pattern coherence of global dot motion (GDM) and Glass pattern (oriented dot pairs) respectively (i.e., the percentage of dots/dot pairs that contribute to the perception of global structure). In Experiment 2, a letter visual-search task was used to measure reaction times (as a function of the number of elements: 4, 8, 16, 32, 64 and 100) in both parallel and serial search conditions. Results Dry cleaners exposed to organic solvents had significantly higher scores on the Q16 compared to non dry-cleaners indicating that dry cleaners experienced more neurotoxic symptoms on average. The contrast sensitivity function for dry cleaners was significantly lower at all spatial frequencies relative to non dry-cleaners, which is consistent with previous studies. Poorer colour discrimination performance was also noted in dry cleaners than non dry-cleaners, particularly along the blue/yellow axis. In a new finding, we report that global form and motion thresholds for dry cleaners were also significantly higher and almost double than that obtained from non dry-cleaners. However, reaction time performance on both parallel and serial visual search was not different between dry cleaners and non dry-cleaners. Conclusions Exposure to occupational levels of organic solvents is associated with neurotoxicity which is in turn associated with both low level deficits (such as the perception of contrast and discrimination of colour) and high level visual deficits such as the perception of global form and motion, but not visual search performance. The latter finding indicates that the deficits in visual function are unlikely to be due to changes in general cognitive performance. PMID:25933026
Human biological monitoring of suspected endocrine-disrupting compounds
Faniband, Moosa; Lindh, Christian H; Jönsson, Bo AG
2014-01-01
Endocrine-disrupting compounds are exogenous agents that interfere with the natural hormones of the body. Human biological monitoring is a powerful method for monitoring exposure to endocrine disrupting compounds. In this review, we describe human biological monitoring systems for different groups of endocrine disrupting compounds, polychlorinated biphenyls, brominated flame retardants, phthalates, alkylphenols, pesticides, metals, perfluronated compounds, parabens, ultraviolet filters, and organic solvents. The aspects discussed are origin to exposure, metabolism, matrices to analyse, analytical determination methods, determinants, and time trends. PMID:24369128
Extraction of organic compounds with room temperature ionic liquids.
Poole, Colin F; Poole, Salwa K
2010-04-16
Room temperature ionic liquids are novel solvents with a rather specific blend of physical and solution properties that makes them of interest for applications in separation science. They are good solvents for a wide range of compounds in which they behave as polar solvents. Their physical properties of note that distinguish them from conventional organic solvents are a negligible vapor pressure, high thermal stability, and relatively high viscosity. They can form biphasic systems with water or low polarity organic solvents and gases suitable for use in liquid-liquid and gas-liquid partition systems. An analysis of partition coefficients for varied compounds in these systems allows characterization of solvent selectivity using the solvation parameter model, which together with spectroscopic studies of solvent effects on probe substances, results in a detailed picture of solvent behavior. These studies indicate that the solution properties of ionic liquids are similar to those of polar organic solvents. Practical applications of ionic liquids in sample preparation include extractive distillation, aqueous biphasic systems, liquid-liquid extraction, liquid-phase microextraction, supported liquid membrane extraction, matrix solvents for headspace analysis, and micellar extraction. The specific advantages and limitations of ionic liquids in these studies is discussed with a view to defining future uses and the need not to neglect the identification of new room temperature ionic liquids with physical and solution properties tailored to the needs of specific sample preparation techniques. The defining feature of the special nature of ionic liquids is not their solution or physical properties viewed separately but their unique combinations when taken together compared with traditional organic solvents. Copyright 2009 Elsevier B.V. All rights reserved.
UV-Vis spectroscopy and solvatochromism of the tyrosine kinase inhibitor AG-1478.
Khattab, Muhammad; Wang, Feng; Clayton, Andrew H A
2016-07-05
The effect of twenty-one solvents on the UV-Vis spectrum of the tyrosine kinase inhibitor AG-1478 was investigated. The absorption spectrum in the range 300-360nm consisted of two partially overlapping bands at approximately 340nm and 330nm. The higher energy absorption band was more sensitive to solvent and exhibited a peak position that varied from 327nm to 336nm, while the lower energy absorption band demonstrated a change in peak position from 340nm to 346nm in non-chlorinated solvents. The fluorescence spectrum of AG-1478 was particularly sensitive to solvent. The wavelength of peak intensity varied from 409nm to 495nm with the corresponding Stokes shift in the range of 64nm to 155nm (4536cm(-1) to 9210cm(-1)). We used a number of methods to assess the relationship between spectroscopic properties and solvent properties. The detailed analysis revealed that for aprotic solvents, the peak position of the emission spectrum in wavenumber scale correlated with the polarity (dielectric constant or ET(30)) of the solvent. In protic solvents, a better correlation was observed between the hydrogen bonding power of the solvent and the position of the emission spectrum. Moreover, the fluorescence quantum yields were larger in aprotic solvents as compared to protic solvents. This analysis underscores the importance of polarity and hydrogen-bonding environment on the spectroscopic properties of AG-1478. These studies will assume relevance in understanding the interaction of AG-1478 in vitro and in vivo. Copyright © 2016 Elsevier B.V. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mo, Alan K; Brown, Victoria L.; Rugg, Brandon K.
The adhesion of 100 nm thick electron-beam deposited Au and Pt and magnetron sputtered Au thin films onto poly(methyl methacrylate) (PMMA) substrates can be significantly enhanced to over 90% adhesion by either spin-casting or vapor-exposure to hydrohalocarbon solvents prior to metal deposition compared to samples that are either cleaned in isopropyl alcohol or pre-treated with a remote O2 plasma. X-ray photoelectron spectroscopy (XPS) and evolved gas Fourier transform infrared spectroscopy (EGA-FTIR) reveal the presence of residual halogenated solvent molecules at the PMMA surface which chemically activates the surface to produce a stable chemical interaction between the noble metal film andmore » the PMMA. Density functional theory (DFT) calculations show that the halogenated solvent molecules preferentially form a Lewis acid-base adduct with the oxygen atoms in the ester group in PMMA which is consistent with the measured enthalpy of desorption of chloroform (CHCl3) on PMMA determined by EGA-FTIR to be 36 kJ mol-1. The DFT model also supports the experimentally observed change in the high resolution XPS O 1s peak at 533.77 eV after metallization attributed to a change in the local bonding environment of the bridging O in the PMMA ester group. DFT also predicts that the deposited metal atom (M) inserts into the C-X bond where X is the halogen atom on either CHCl3 or bromoform (CHBr3) to form a O M X interaction that is observed by a M-X bond in the high resolution XPS Cl 2p3/2 peak at 198.03 eV and Br 3p3/2 peak at 182.06 eV. A range of solvents with differing polarities for PMMA pre-treatment have been used and it is proposed that non-complexing solvents result in significant metal adhesion improvement. The Gutmann acceptor number can be used to predict the effectiveness of solvent treatment for noble metal adhesion. A model is proposed in which the bond energy of the C-X bond of the solvent must be sufficiently low so that the C-X bond can be cleaved to form the M-X bond. Supporting this model, a negative control of vapor phase exposure to fluoroform (CHF3) is shown to have no effect on noble metal adhesion due to the higher bond dissociation energy of the C-F bond compared to the C-Cl and C-Br bond energy. The surface activation of vapor-phase exposed PMMA surfaces is technologically significant for the fabrication of polymer microdevices requiring Au or Pt metallization.« less
Kidney cancer and hydrocarbon exposures among petroleum refinery workers.
Poole, C; Dreyer, N A; Satterfield, M H; Levin, L; Rothman, K J
1993-12-01
To evaluate the hypothesis of increased kidney cancer risk after exposure to hydrocarbons, especially those present in gasoline, we conducted a case-control study in a cohort of approximately 100,000 male refinery workers from five petroleum companies. A review of 18,323 death certificates identified 102 kidney cancer cases, to each of whom four controls were matched by refinery location and decade of birth. Work histories, containing an average of 15.7 job assignments per subject, were found for 98% of the cases and 94% of the controls. To each job, industrial hygienists assigned semiquantitative ratings for the intensity and frequency of exposures to three hydrocarbon categories: nonaromatic liquid gasoline distillates, aromatic hydrocarbons, and the more volatile hydrocarbons. Ratings of "present" or "absent" were assigned for seven additional exposures: higher boiling hydrocarbons, polynuclear aromatic hydrocarbons, asbestos, chlorinated solvents, ionizing radiation, and lead. Each exposure had either no association or a weak association with kidney cancer. For the hydrocarbon category of principal a priori interest, the nonaromatic liquid gasoline distillates, the estimated relative risk (RR) for any exposure above refinery background was 1.0 (95% confidence interval [CI] 0.5-1.9). Analyses of cumulative exposures and of exposures in varying time periods before kidney cancer occurrence also produced null or near-null results. In an analysis of the longest job held by each subject (average duration 9.2 years or 40% of the refinery work history), three groups appeared to be at increased risk: laborers (RR = 1.9, 95% CI 1.0-3.9); workers in receipt, storage, and movements (RR = 2.5, 95% CI 0.9-6.6); and unit cleaners (RR = 2.3, 95% CI 0.5-9.9).
Can the ceramic industry be a new and hazardous sector for work-related asthma?
Kurt, Ozlem Kar; Ergun, Dilek; Basaran, Nursen
2018-04-01
Work-related asthma (WRA) constitutes a significant proportion of all asthma cases and continues to be reported from different industries. The aim of the study was to identify the occupations that can be related to WRA and diagnostic steps used in suspected WRA patients. We retrospectively reviewed the clinical records of WRA suspected patients who were referred to Ankara Occupational and Environmental Diseases Hospital, Turkey from January 2015 to January 2017. Detailed occupational history, the diagnostic steps such as pulmonary function testing (PFT), peak expiratory flow (PEF) monitoring and nonspecific bronchial provocation tests (NSBPT) were recorded. Among 160 patients, 148 were male and 12 were female. Only 2 of them were diagnosed as work-exacerbated asthma (WEA). Diagnosis of asthma was based on using reversible airflow limitation 28.8% (n = 46) or NSBPT 31.9% (n = 51). Toxicological analysis showed that 28 patients had heavy metal poisoning, 9 patients had solvent poisoning, 4 patients had both. According to occupations, 32 of them were ceramic workers (20.0%) and 27 of them were metal workers (16.9%). Plastic workers (4 ± 2.8 years), cleaners (6.2 ± 5.7 years), metal workers (7.4 ± 5.4 years), painters (10 ± 5.2 years), ceramic workers (10.8 ± 5.9 years) had the shortest exposure durations for development of occupational asthma (OA). An analysis of variance showed that the effect of heavy metal and solvent poisoning on mean time for onset of OA was not significant. The results demonstrate that besides the sectors known to cause WRA, ceramic and metal industries can be related to important exposures related to WRA. Medical surveillance of employees in this sector is important in early detection. Copyright © 2018 Elsevier Ltd. All rights reserved.
Carino, Emily V; Newman, Daniel J; Connell, Justin G; Kim, Chaerin; Brushett, Fikile R
2017-10-31
Irreversible changes to the morphology of glassy carbon (GC) electrodes at potentials between 3.5 and 4.5 V vs Li/Li + in propylene carbonate (PC) solvent containing lithium hexafluorophosphate (LiPF 6 ) are reported. Analysis of cyclic voltammetry (CV) experiments in the range of 3.0 to 6.0 V shows that the capacitance of the electrochemical double-layer increased irreversibly beginning at potentials as low as 3.5 V. These changes resulted from nonfaradaic interactions, and were not due to oxidative electrochemical decomposition of the electrode and electrolyte, anion intercalation, nor caused by the presence of water, a common impurity in organic electrolyte solutions. Atomic force microscopy (AFM) images revealed that increasing the potential of a bare GC surface from 3.0 to 4.5 V resulted in a 6× increase in roughness, in good agreement with the changes in double-layer capacitance. Treating the GC surface via exposure to trichloromethylsilane vapors resulted in a stable double-layer capacitance between 3.0 and 4.5 V, and this treatment also correlated with less roughening. These results inform future efforts aimed at controlling surface composition and morphology of carbon electrodes.
Hopf, Nancy B.; Ruder, Avima M.; Waters, Martha A.
2015-01-01
We developed a semiquantitative job exposure matrix (JEM) for workers exposed to polychlorinated biphenyls (PCBs) at a capacitor manufacturing plant from 1946 to 1977. In a recently updated mortality study, mortality of prostate and stomach cancer increased with increasing levels of cumulative exposure estimated with this JEM (trend p values=0.003 and 0.04, respectively). Capacitor manufacturing began with winding bales of foil and paper film, which were placed in a metal capacitor box (pre-assembly), and placed in a vacuum chamber for flood-filling (impregnation) with dielectric fluid (PCBs). Capacitors dripping with PCB residues were then transported to sealing stations where ports were soldered shut before degreasing, leak testing, and painting. Using a systematic approach, all 509 unique jobs identified in the work histories were rated by predetermined process- and plant-specific exposure determinants; then categorized based on the jobs’ similarities (combination of exposure determinants) into 35 job exposure categories. The job exposure categories were ranked followed by a qualitative PCB exposure rating (baseline, low, medium, and high) for inhalation and dermal intensity. Category differences in other chemical exposures (solvents, etc.) prevented further combining of categories. The mean of all available PCB concentrations (1975 and 1977) for jobs within each intensity rating was regarded as a representative value for that intensity level. Inhalation (in microgram per cubic milligram) and dermal (unitless) exposures were regarded as equally important. Intensity was frequency adjusted for jobs with continuous or intermittent PCB exposures. Era-modifying factors were applied to the earlier time periods (1946–1974) because exposures were considered to have been greater than in later eras (1975–1977). Such interpolations, extrapolations, and modifying factors may introduce non-differential misclassification; however, we do believe our rigorous method minimized misclassification, as shown by the significant exposure–response trends in the epidemiologic analysis. PMID:23475444
IRIS Toxicological Review of Benzene (Noncancer Effects) (1998 External Review Draft)
Benzene is a widely used as an industrial solvent, an intermediate in chemical synthesis of commercial products, and a component of gasoline. The potential for human exposure via inhalation, dermal, and oral routes is great under environmental and occupational situations. The U.S...
Quantitative comparisons of the actute neurotoxicity of toulene in rats and humans.
The behavioral and neurophysiological effects of acute exposure to toluene are the most thoroughly explored of all the hydrocarbon solvents. Behavioral effects have been experimentally studied in humans and other species, for example, rats. The existence of both rat and human dos...
IRIS TOXICOLOGICAL REVIEW OF BENZENE (NONCANCER EFFECTS)
Benzene, also known as benzol, is widely used as an industrial solvent, as an intermediate in chemical syntheses, and as a component of gasoline; hence, the potential for human exposure is great. The emphasis of this document is a discussion of the noncancer adverse healt...
PESTICIDE SURFACE RESIDUE MEASUREMENTS BY A PRESS SAMPLER
Pesticides on household surfaces are a source of exposure to children. Accurate measurements of residues on surfaces are needed to determine amounts available for transfer to foods and other objects handled or eaten by a child. Wiping the surface with a solvent has been the acc...
SOLVENT-FREE PREPARATION OF IONIC LIQUIDS USING A HOUSEHOLD MICROWAVE OVEN
An efficient solventless protocol for the preparation of a wide variety of ionic liquids is described which requires a simple exposure of admixed 1-methylimidazole and alkyl halides to microwave irradiation in open glass containers. The details of this clean process using a commo...
Electron mobility enhancement in ZnO thin films via surface modification by carboxylic acids
NASA Astrophysics Data System (ADS)
Spalenka, Josef W.; Gopalan, Padma; Katz, Howard E.; Evans, Paul G.
2013-01-01
Modifying the surface of polycrystalline ZnO films using a monolayer of organic molecules with carboxylic acid attachment groups increases the field-effect electron mobility and zero-bias conductivity, resulting in improved transistors and transparent conductors. The improvement is consistent with the passivation of defects via covalent bonding of the carboxylic acid and is reversible by exposure to a UV-ozone lamp. The properties of the solvent used for the attachment are crucial because solvents with high acid dissociation constants (Ka) for carboxylic acids lead to high proton activities and etching of the nanometers-thick ZnO films, masking the electronic effect.
Method and apparatus for back-extracting metal chelates
Wai, C.M.; Smart, N.G.; Lin, Y.
1998-08-11
A method is described for extracting metal and metalloid species from a solid or liquid substrate using a supercritical fluid solvent containing one or more chelating agents followed by back-extracting the metal and metalloid species from the metal and metalloid chelates formed thereby. The back-extraction acidic solution is performed utilizing an acidic solution. Upon sufficient exposure of the metal and metalloid chelates to the acidic solution, the metal and metalloid species are released from the chelates into the acid solution, while the chelating agent remains in the supercritical fluid solvent. The chelating agent is thereby regenerated and the metal and metalloid species recovered. 3 figs.
Increased frequency of chromosomal aberrations in railroad car painters.
Piña-Calva, A; Madrigal-Bujaidar, E; Fuentes, M V; Neria, P; Pérez-Lucio, C; Vélez-Zamora, N M
1991-01-01
The purpose of this study was to determine if exposure to paints and solvents contributes to chromosomal alterations in occupationally exposed individuals. A total of 25 male railroad and underground railroad car painters were studied. This group had a mean age of 32.7 y and a mean exposure time of 5.2 y. The results were compared with those obtained for 25 healthy (unexposed) males. The scoring of structural chromosome aberrations clearly revealed an increase in the number of all types of aberrations considered in the population of painters. This suggests that exposure to a combination of chemicals may increase genotoxicity in industrial workers.
The influence of solvent processing on polyester bioabsorbable polymers.
Manson, Joanne; Dixon, Dorian
2012-01-01
Solvent-based methods are commonly employed for the production of polyester-based samples and coatings in both medical device production and research. The influence of solvent casting and subsequent drying time was studied using thermal analysis, spectroscopy and weight measurement for four grades of 50 : 50 poly(lactic-co-glycolic acid) (PLGA) produced by using chloroform, dichloromethane, and acetone. The results demonstrate that solvent choice and PLGA molecular weight are critical factors in terms of solvent removal rate and maintaining sample integrity, respectively. The protocols widely employed result in high levels of residual solvent and a new protocol is presented together with solutions to commonly encountered problems.
Li, B O; Liu, Yuan
A phase-field free-energy functional for the solvation of charged molecules (e.g., proteins) in aqueous solvent (i.e., water or salted water) is constructed. The functional consists of the solute volumetric and solute-solvent interfacial energies, the solute-solvent van der Waals interaction energy, and the continuum electrostatic free energy described by the Poisson-Boltzmann theory. All these are expressed in terms of phase fields that, for low free-energy conformations, are close to one value in the solute phase and another in the solvent phase. A key property of the model is that the phase-field interpolation of dielectric coefficient has the vanishing derivative at both solute and solvent phases. The first variation of such an effective free-energy functional is derived. Matched asymptotic analysis is carried out for the resulting relaxation dynamics of the diffused solute-solvent interface. It is shown that the sharp-interface limit is exactly the variational implicit-solvent model that has successfully captured capillary evaporation in hydrophobic confinement and corresponding multiple equilibrium states of underlying biomolecular systems as found in experiment and molecular dynamics simulations. Our phase-field approach and analysis can be used to possibly couple the description of interfacial fluctuations for efficient numerical computations of biomolecular interactions.
Order of wetting transitions in electrolyte solutions.
Ibagon, Ingrid; Bier, Markus; Dietrich, S
2014-05-07
For wetting films in dilute electrolyte solutions close to charged walls we present analytic expressions for their effective interface potentials. The analysis of these expressions renders the conditions under which corresponding wetting transitions can be first- or second-order. Within mean field theory we consider two models, one with short- and one with long-ranged solvent-solvent and solvent-wall interactions. The analytic results reveal in a transparent way that wetting transitions in electrolyte solutions, which occur far away from their critical point (i.e., the bulk correlation length is less than half of the Debye length) are always first-order if the solvent-solvent and solvent-wall interactions are short-ranged. In contrast, wetting transitions close to the bulk critical point of the solvent (i.e., the bulk correlation length is larger than the Debye length) exhibit the same wetting behavior as the pure, i.e., salt-free, solvent. If the salt-free solvent is governed by long-ranged solvent-solvent as well as long-ranged solvent-wall interactions and exhibits critical wetting, adding salt can cause the occurrence of an ion-induced first-order thin-thick transition which precedes the subsequent continuous wetting as for the salt-free solvent.
Shen, Jinchao; Shao, Xueguang
2005-11-01
The performance of accelerated solvent extraction in the analysis of terpenoids and sterols in tobacco samples was investigated and compared with those of Soxhlet extraction and ultrasonically assisted extraction with respect to yield, extraction time, reproducibility and solvent consumption. The results indicate that although the highest yield was achieved by Soxhlet extraction, ASE appears to be a promising alternative to classical methods since it is faster and uses less solvent, especially when applied to the investigation of large batch tobacco samples. However, Soxhlet extraction is still the preferred method for analyzing sterols since it gives a higher extraction efficiency than other methods.
Effects of chlorinated solvents on four species of North American amphibians.
McDaniel, T V; Martin, P A; Ross, N; Brown, S; Lesage, S; Pauli, B D
2004-07-01
Tetrachloroethylene (PCE), a dry cleaning and degreasing solvent, can enter groundwater through accidental leaks or spills, and concentrations as high as 75 mg/L have been reported in Canadian aquifers. Amphibians in wetlands receiving contaminated groundwater may be exposed to PCE and its degradation products, but little information is available on the impacts of these compounds on indigenous amphibian species. Acute (96-h static renewal) exposures to PCE and its major degradation products, trichloroethylene (TCE) and cisand trans-dichloroethylene, were conducted on embryos of four North American amphibian species: wood frogs (Rana sylvatica), green frogs (R. clamitans), American toads (Bufo americanus), and spotted salamanders (Ambystoma maculatum). Subsequently, chronic exposures to PCE and TCE were conducted with the larvae of American toads. Both PCE and TCE were teratogenic to amphibian embryos; median effective concentrations (EC50s) for developmental deformities produced by PCE and TCE exposure for wood frogs and green frogs were 12 and 40 mg/L, respectively. Embryonic survivorship, however, was not compromised at these concentrations. American toads were less sensitive; the EC50 for developmental abnormalities was not attained at the highest test concentrations, 45 and 85 mg/L PCE and TCE, respectively. These results are pertinent in assessing the impact of groundwater pollution on an aquifer-fed wetland.
Saxena, Prem Narain
2013-01-01
Despite recent advances in understanding mechanism of toxicity, the development of biomarkers (biochemicals that vary significantly with exposure to chemicals) for pesticides and environmental contaminants exposure is still a challenging task. Carbofuran is one of the most commonly used pesticides in agriculture and said to be most toxic carbamate pesticide. It is necessary to identify the biochemicals that can vary significantly after carbofuran exposure on earthworms which will help to assess the soil ecotoxicity. Initially, we have optimized the extraction conditions which are suitable for high-throughput gas chromatography mass spectrometry (GC-MS) based metabolomics for the tissue of earthworm, Metaphire posthuma. Upon evaluation of five different extraction solvent systems, 80% methanol was found to have good extraction efficiency based on the yields of metabolites, multivariate analysis, total number of peaks and reproducibility of metabolites. Later the toxicity evaluation was performed to characterize the tissue specific metabolomic perturbation of earthworm, Metaphire posthuma after exposure to carbofuran at three different concentration levels (0.15, 0.3 and 0.6 mg/kg of soil). Seventeen metabolites, contributing to the best classification performance of highest dose dependent carbofuran exposed earthworms from healthy controls were identified. This study suggests that GC-MS based metabolomic approach was precise and sensitive to measure the earthworm responses to carbofuran exposure in soil, and can be used as a promising tool for environmental eco-toxicological studies. PMID:24324663
Leukemia and brain tumors in Norwegian railway workers, a nested case-control study.
Tynes, T; Jynge, H; Vistnes, A I
1994-04-01
In an attempt to assess whether exposure to electromagnetic fields on Norwegian railways induces brain tumors or leukemia, the authors conducted a nested case-control study of railway workers based on incident cases from the Cancer Registry of Norway in a cohort of 13,030 male Norwegian railway workers who had worked on either electric or non-electric railways. The cohort comprised railway line, outdoor station, and electricity workers. The case series comprised 39 men with brain tumors and 52 men with leukemia (follow-up, 1958-1990). Each case was matched on age with four or five controls selected from the same cohort. The exposure of each study subject to electric and magnetic fields was evaluated from cumulative exposure measures based on present measurements and historical data. Limited information on potential confounders such as creosote, solvents, and herbicides was also collected; information on whether the subject had smoked was obtained by interviews with the subjects or work colleagues. The case-control analysis showed that men employed on electric railways, compared with non-electric ones, had an odds ratio for leukemia of 0.70 (adjusted for smoking) and an odds ratio for brain tumor of 0.87. No significant trend was shown for exposure to either magnetic or electric fields. These results do not support an association between exposure to 16 2/3-Hertz electric or magnetic fields and the risk for leukemia or brain tumors.
A QUANTITATIVE COMPARISON OF THE EFFECTS OF ACUTE INHALED TOLUENE IN HUMAN RATS
The effects of acute exposure to toluene have been explored more thoroughly than other hydrocarbon solvents. These effects have been experimentally studied in humans and other species, e.g., rats, as well as in a number of in vitro preparations. The existence ofdosimetric and eff...
The two major sources of arsenic exposure used in an arsenic risk assessment are water and diet. The extraction, separation and quantification of individual arsenic species from dietary sources is considered an area of uncertainty within the arsenic risk assessment. The uncertain...
1983-12-01
colorless volatile liquid whose solubility in water is minimal. It is completely miscible with most organic solvents (1). It is nonflammable and has a...University oi Utah will provide you, without charge, emergency and temporary medical tratament not otherwise covered by Insurance. Furthermore, if your
WHY DO THE ACUTE BEHAVIORAL EFFECTS OT TOLUENE IN RATS DEPEND ON THE ROUTE OF EXPOSURE?
Despite evidence suggesting that the acute effects of organic solvents are related to their concentration in the brain, we have observed route-dependent differences in the acute behavioral effects of toluene. Whereas inhaled toluene disrupts the performance of rats on a visual si...
Impaired visual functions, including low contrast sensitivity and reduced color discrimination, have been reported in studies of humans chronically exposed to several volatile organic solvents. These reports remain controversial, however, in part due to a lack of confirmation fro...
Studies of humans chronically exposed to volatile organic solvents commonly report impaired visual functions, including low contrast sensitivity and reduced color discrimination. These reports have been controversial, however, in part due to a lack of confirmation from controlled...
A SEARCH FOR RESIDUAL BEHAVIORAL EFFECTS OF TRICHLOROETHYLENE (TCE) IN RATS EXPOSED AS YOUNG ADULTS
Trichloroethylene (TCE) is a solvent of concern to the EPA due to its extensive use in industry, its prevalence in urban air, and its appearance in water supplies. Human clinical studies have associated short and long-termsolvent exposures with cognitive dysfunction including att...
Advancing polymers of intrinsic microporosity by mechanochemistry
Zhang, Pengfei; Jiang, Xueguang; Wan, Shun; ...
2015-02-20
Herein, we report a fast (15 min) and solvent-free mechanochemical approach to construct polymers of intrinsic microporosity (PIMs) with high molecular mass and low polydispersity by solid grinding. The enhanced reaction efficiency results from the instantaneous frictional heating and continuous exposure of active sites within those solid reactants.
Ukai, Hirohiko; Ohashi, Fumiko; Samoto, Hajime; Fukui, Yoshinari; Okamoto, Satoru; Moriguchi, Jiro; Ezaki, Takafumi; Takada, Shiro; Ikeda, Masayuki
2006-04-01
The present study was initiated to examine the relationship between the workplace concentrations and the estimated highest concentrations in solvent workplaces (SWPs), with special references to enterprise size and types of solvent work. Results of survey conducted in 1010 SWPs in 156 enterprises were taken as a database. Workplace air was sampled at > or = 5 crosses in each SWP following a grid sampling strategy. An additional air was grab-sampled at the site where the worker's exposure was estimated to be highest (estimated highest concentration or EHC). The samples were analyzed for 47 solvents designated by regulation, and solvent concentrations in each sample were summed up by use of additiveness formula. From the workplace concentrations at > or = 5 points, geometric mean and geometric standard deviations were calculated as the representative workplace concentration (RWC) and the indicator of variation in workplace concentration (VWC). Comparison between RWC and EHC in the total of 1010 SWPs showed that EHC was 1.2 (in large enterprises with>300 employees) to 1.7 times [in small to medium (SM) enterprises with < or = 300 employees] greater than RWC. When SWPs were classified into SM enterprises and large enterprises, both RWC and EHC were significantly higher in SM enterprises than in large enterprises. Further comparison by types of solvent work showed that the difference was more marked in printing, surface coating and degreasing/cleaning/wiping SWPs, whereas it was less remarkable in painting SWPs and essentially nil in testing/research laboratories. In conclusion, the present observation as discussed in reference to previous publications suggests that RWC, EHC and the ratio of EHC/WRC varies substantially among different types of solvent work as well as enterprise size, and are typically higher in printing SWPs in SM enterprises.
Fields, Wanda; Fowler, Kathy; Hargreaves, Victoria; Reeve, Lesley; Bombick, Betsy
2017-04-01
Cytotoxicity assessment of combustible tobacco products by neutral red uptake (NRU) has historically used total particulate matter (TPM) or solvent captured gas vapor phase (GVP), rather than fresh whole smoke. Here, the development, validation and application of the NRU assay in Chinese Hamster Ovary (CHO) cells, following exposure to fresh whole smoke generated with the VITROCELL® VC10® system is described. Whole smoke exposure is particularly important as both particulate and vapor phases of tobacco smoke show cytotoxicity in vitro. The VITROCELL® VC10® system provides exposure at the air liquid interface (ALI) to mimic in vivo conditions for assessing the toxicological impact of smoke in vitro. Instrument and assay validations are crucial for comparative analyses. 1) demonstrate functionality of the VITROCELL® VC10® system by installation, operational and performance qualification, 2) develop and validate a cellular system for assessing cytotoxicity following whole smoke exposure and 3) assess the whole smoke NRU assay sensitivity for statistical differentiation between a reference combustible cigarette (3R4F) and a primarily "heat-not-burn" cigarette (Eclipse). The VITROCELL® VC10® provided consistent generation and delivery of whole smoke; exposure-related changes in in vitro cytotoxicity were observed with reproducible IC 50 values; comparative analysis showed that the heat-not-burn cigarette was significantly (P<0.001) less cytotoxic than the 3R4F combustible cigarette, consistent with the lower levels of chemical constituents liberated by primarily-heating the cigarette versus burning. Copyright © 2017. Published by Elsevier Ltd.
A population-based job exposure matrix for power-frequency magnetic fields.
Bowman, Joseph D; Touchstone, Jennifer A; Yost, Michael G
2007-09-01
A population-based job exposure matrix (JEM) was developed to assess personal exposures to power-frequency magnetic fields (MF) for epidemiologic studies. The JEM compiled 2,317 MF measurements taken on or near workers by 10 studies in the United States, Sweden, New Zealand, Finland, and Italy. A database was assembled from the original data for six studies plus summary statistics grouped by occupation from four other published studies. The job descriptions were coded into the 1980 Standard Occupational Classification system (SOC) and then translated to the 1980 job categories of the U.S. Bureau of the Census (BOC). For each job category, the JEM database calculated the arithmetic mean, standard deviation, geometric mean, and geometric standard deviation of the workday-average MF magnitude from the combined data. Analysis of variance demonstrated that the combining of MF data from the different sources was justified, and that the homogeneity of MF exposures in the SOC occupations was comparable to JEMs for solvents and particulates. BOC occupation accounted for 30% of the MF variance (p < 10(-6)), and the contrast (ratio of the between-job variance to the total of within- and between-job variances) was 88%. Jobs lacking data had their exposures inferred from measurements on similar occupations. The JEM provided MF exposures for 97% of the person-months in a population-based case-control study and 95% of the jobs on death certificates in a registry study covering 22 states. Therefore, we expect this JEM to be useful in other population-based epidemiologic studies.
Mooney, Barbara Logan; Corrales, L René; Clark, Aurora E
2012-03-30
This work discusses scripts for processing molecular simulations data written using the software package R: A Language and Environment for Statistical Computing. These scripts, named moleculaRnetworks, are intended for the geometric and solvent network analysis of aqueous solutes and can be extended to other H-bonded solvents. New algorithms, several of which are based on graph theory, that interrogate the solvent environment about a solute are presented and described. This includes a novel method for identifying the geometric shape adopted by the solvent in the immediate vicinity of the solute and an exploratory approach for describing H-bonding, both based on the PageRank algorithm of Google search fame. The moleculaRnetworks codes include a preprocessor, which distills simulation trajectories into physicochemical data arrays, and an interactive analysis script that enables statistical, trend, and correlation analysis, and other data mining. The goal of these scripts is to increase access to the wealth of structural and dynamical information that can be obtained from molecular simulations. Copyright © 2012 Wiley Periodicals, Inc.
Urakami, K; Saito, Y; Fujiwara, Y; Watanabe, C; Umemoto, K; Godo, M; Hashimoto, K
2000-12-01
Thermal desorption (TD) techniques followed by capillary GC/MS were applied for the analysis of residual solvents in bulk pharmaceuticals. Solvents desorbed from samples by heating were cryofocused at the head of a capillary column prior to GC/MS analysis. This method requires a very small amount of sample and no sample pretreatment. Desorption temperature was set at the point about 20 degrees C higher than the melting point of each sample individually. The relative standard deviations of this method tested by performing six consecutive analyses of 8 different samples were 1.1 to 3.1%, and analytical results of residual solvents were in agreement with those obtained by direct injection of N,N-dimethylformamide solution of the samples into the GC. This novel TD/GC/MS method was demonstrated to be very useful for the identification and quantification of residual solvents in bulk pharmaceuticals.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hancu, Dan
GE Global Research has developed, over the last 8 years, a platform of cost effective CO2 capture technologies based on a non-aqueous aminosilicone solvent (GAP-1m). As demonstrated in previous funded DOE projects (DE-FE0007502 and DEFE0013755), the GAP-1m solvent has increased CO2 working capacity, lower volatility and corrosivity than the benchmark aqueous amine technology. Performance of the GAP-1m solvent was recently demonstrated in a 0.5 MWe pilot at National Carbon Capture Center, AL with real flue gas for over 500 hours of operation using a Steam Stripper Column (SSC). The pilot-scale PSTU engineering data were used to (i) update the techno-economicmore » analysis, and EH&S assessment, (ii) perform technology gap analysis, and (iii) conduct the solvent manufacturability and scale-up study.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rondinelli, R.; Wilcox, T.; Roper, P.
1986-05-01
The U.S. Geological Survey National Water Quality Laboratory, Doraville, Georgia requested an evaluation of physical complaints reported by employees to determine possible work related causes. Laboratory workers, in general, complained of physical symptoms which were irritative (rash, sore throat, nose or sinus irritation), neurological (numbness, muscle weakness) and nonspecific (dizziness, headache, emotional swings, insomnia, muscle aching, fatigue). Reported exposure to solvents such as benzene, methylene chloride, hexane and acetone were positively related with light headedness or dizziness, numbness, unexplained muscle weakness and muscle aching. Air sampling did not reveal any remarkable exposure to chemical contaminants. The authors conclude that nomore » relationship could be established between chemical exposures and antinuclear antibody positivity. Exposure to chemicals measured by air sampling were below occupational health exposure limits.« less
Residential Proximity to Gasoline Stations and Risk of Childhood Leukemia.
Infante, Peter F
2017-01-01
Significant elevations in the risk of childhood leukemia have been associated with environmental exposure to gasoline; aromatic hydrocarbons from refinery pollution, petroleum waste sites, and mobile sources (automobile exhaust); paints, paint products, and thinners; and secondary cigarette smoke in the home. These higher risks have also been associated with parental exposure to benzene, gasoline, motor vehicle-related jobs, painting, and rubber solvents. These exposures and jobs have 1 common chemical exposure-benzene, a recognized cause of acute leukemia in adults-and raise the question of whether children represent a subpopulation in which a higher risk of leukemia is associated with very low level exposure to environmental benzene. © The Author 2016. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Tripodi, Dominique; Ferron, Christophe; Malard, Olivier; de Montreuil, Claude Beauvillain; Planche, Lucie; Sebille-Rivain, Veronique; Roedlich, Claude; Quéméner, Sylvia; Renaudin, Karine; Longuenesse, Claire; Verger, Christian; Meflah, Khaled; Gratas, Catherine; Géraut, Christian
2011-09-01
Wood dust is a well-established risk factor for intestinal type sinonasal adenocarcinoma. The 5-year overall survival has varied from 20% to 80% according T1-T4 stages; 5-year survival according to histologic subtype has varied from 20% to 50%. To date, no study has evaluated whether environmental, occupational, and personal risk factors have any impact on both overall and cancer-specific survival. We aimed to determine whether exposure to carcinogenic risk factors besides wood exposure can influence the survival of patients with sinonasal ethmoid carcinoma. Retrospective cohort study of the association of survival data and occupational and personal carcinogenic risk factors. All patients hospitalized for ethmoid adenocarcinoma at the Nantes University Hospital between 1988 and 2004 were included . Data concerning TNM classification, histology, type and quality of tumor resection at the macro- and microscopic level, and occupational and personal exposure to carcinogens were collected. Statistical analysis was conducted using univariate and multivariate linear regression. A total of 98 patients were included with a response rate of 98%. Data showed 86% of patients had been exposed to wood dust. The 5-year survival was 62%. We first identified four factors that independently influenced overall survival: diplopia (P = .0159), spread to the orbit (P = .0113), bilateral involvement (P = .0134), TNM stage (P < .001). When the analysis included all occupational environmental factors (wood dust, solvent, and metals exposure) as well as personal risk factors, the length of exposure to metals (P = .0307) and tobacco exposure (P = .0031) also were found to influence 5-year overall survival. We identified high prevalence of colon cancer (4%) and double cancer (18%). We showed exposure to both environmental (tobacco) and occupational (metal dust) factors could influence survival in the diagnosis of a cancer. Our study suggests that screening for colon cancer should be offered to wood dust workers. A prospective multicentric study should be necessary to confirm our results. Copyright © 2011 The American Laryngological, Rhinological, and Otological Society, Inc.
Grimmett, Paul E; Munch, Jean W
2009-01-01
1,4-Dioxane has been identified as a probable human carcinogen and an emerging contaminant in drinking water. The United States Environmental Protection Agency's (U.S. EPA) National Exposure Research Laboratory (NERL) has developed a method for the analysis of 1,4-dioxane in drinking water at ng/L concentrations. The method consists of an activated carbon solid-phase extraction of 500-mL or 100-mL water samples using dichloromethane as the elution solvent. The extracts are analyzed by gas chromatography-mass spectrometry (GC-MS) in selected ion monitoring (SIM) mode. In the NERL laboratory, recovery of 1,4-dioxane ranged from 94-110% in fortified laboratory reagent water and recoveries of 96-102% were demonstrated for fortified drinking water samples. The relative standard deviations for replicate analyses were less than 6% at concentrations exceeding the minimum reporting level.
Zhong, Tuhua; Oporto, Gloria S.; Jaczynski, Jacek; Jiang, Changle
2015-01-01
Our long-term goal is to develop a hybrid cellulose-copper nanoparticle material as a functional nanofiller to be incorporated in thermoplastic resins for efficiently improving their antimicrobial properties. In this study, copper nanoparticles were first synthesized through chemical reduction of cupric ions on TEMPO nanofibrillated cellulose (TNFC) template using borohydride as a copper reducing agent. The resulting hybrid material was embedded into a polyvinyl alcohol (PVA) matrix using a solvent casting method. The morphology of TNFC-copper nanoparticles was analyzed by transmission electron microscopy (TEM); spherical copper nanoparticles with average size of 9.2 ± 2.0 nm were determined. Thermogravimetric analysis and antimicrobial performance of the films were evaluated. Slight variations in thermal properties between the nanocomposite films and PVA resin were observed. Antimicrobial analysis demonstrated that one-week exposure of nonpathogenic Escherichia coli DH5α to the nanocomposite films results in up to 5-log microbial reduction. PMID:26137482
Almandoz, M C; Sancho, M I; Duchowicz, P R; Blanco, S E
2014-08-14
The solvatochromic behavior of trimethoprim (TMP) was analyzed using UV-Vis spectroscopy and DFT methods in neat and binary aqueous solvent mixtures. The effects of solvent dipolarity/polarizability and solvent-solute hydrogen bonding interactions on the absorption maxima were evaluated by means of the linear solvation energy relationship concept of Kamlet and Taft. This analysis indicated that both interactions play an important role in the position of the absorption maxima in neat solvents. The simulated absorption spectra of TMP and TMP:(solvent)n complexes in ACN and H2O using TD-DFT methods were in agreement with the experimental ones. Binary aqueous mixtures containing as co-solvents DMSO, ACN and EtOH were studied. Preferential solvation was detected as a nonideal behavior of the wavenumber curve respective to the analytical mole fraction of co-solvent in all binary systems. TMP molecules were preferentially solvated by the organic solvent over the whole composition range. Index of preferential solvation, as well as the influence of solvent parameters were calculated as a function of solvent composition. Copyright © 2014 Elsevier B.V. All rights reserved.
2012-01-01
Background While many studies of adults with solvent exposure have shown increased risks of anxiety and depressive disorders, there is little information on the impact of prenatal and early childhood exposure on the subsequent risk of mental illness. This retrospective cohort study examined whether early life exposure to tetrachloroethylene (PCE)-contaminated drinking water influenced the occurrence of depression, bipolar disorder, post-traumatic stress disorder, and schizophrenia among adults from Cape Cod, Massachusetts. Methods A total of 1,512 subjects born between 1969 and 1983 were studied, including 831 subjects with both prenatal and early childhood PCE exposure and 547 unexposed subjects. Participants completed questionnaires to gather information on mental illnesses, demographic and medical characteristics, other sources of solvent exposure, and residences from birth through 1990. PCE exposure originating from the vinyl-liner of water distribution pipes was assessed using water distribution system modeling software that incorporated a leaching and transport algorithm. Results No meaningful increases in risk ratios (RR) for depression were observed among subjects with prenatal and early childhood exposure (RR: 1.1, 95% CI: 0.9-1.4). However, subjects with prenatal and early childhood exposure had a 1.8-fold increased risk of bipolar disorder (N = 36 exposed cases, 95% CI: 0.9-1.4), a 1.5-fold increased risk post-traumatic stress disorder (N = 47 exposed cases, 95% CI: 0.9-2.5), and a 2.1-fold increased risk of schizophrenia (N = 3 exposed cases, 95% CI: 0.2-20.0). Further increases in the risk ratio were observed for bipolar disorder (N = 18 exposed cases, RR; 2.7, 95% CI: 1.3-5.6) and post-traumatic stress disorder (N = 18 exposed cases, RR: 1.7, 95% CI: 0.9-3.2) among subjects with the highest exposure levels. Conclusions The results of this study provide evidence against an impact of early life exposure to PCE on the risk of depression. In contrast, the results provide support for an impact of early life exposure on the risk of bipolar disorder and post-traumatic stress disorder. The number of schizophrenia cases was too small to draw reliable conclusions. These findings should be confirmed in investigations of other similarly exposed populations. PMID:22264316
Aschengrau, Ann; Weinberg, Janice M; Janulewicz, Patricia A; Romano, Megan E; Gallagher, Lisa G; Winter, Michael R; Martin, Brett R; Vieira, Veronica M; Webster, Thomas F; White, Roberta F; Ozonoff, David M
2012-01-20
While many studies of adults with solvent exposure have shown increased risks of anxiety and depressive disorders, there is little information on the impact of prenatal and early childhood exposure on the subsequent risk of mental illness. This retrospective cohort study examined whether early life exposure to tetrachloroethylene (PCE)-contaminated drinking water influenced the occurrence of depression, bipolar disorder, post-traumatic stress disorder, and schizophrenia among adults from Cape Cod, Massachusetts. A total of 1,512 subjects born between 1969 and 1983 were studied, including 831 subjects with both prenatal and early childhood PCE exposure and 547 unexposed subjects. Participants completed questionnaires to gather information on mental illnesses, demographic and medical characteristics, other sources of solvent exposure, and residences from birth through 1990. PCE exposure originating from the vinyl-liner of water distribution pipes was assessed using water distribution system modeling software that incorporated a leaching and transport algorithm. No meaningful increases in risk ratios (RR) for depression were observed among subjects with prenatal and early childhood exposure (RR: 1.1, 95% CI: 0.9-1.4). However, subjects with prenatal and early childhood exposure had a 1.8-fold increased risk of bipolar disorder (N = 36 exposed cases, 95% CI: 0.9-1.4), a 1.5-fold increased risk post-traumatic stress disorder (N = 47 exposed cases, 95% CI: 0.9-2.5), and a 2.1-fold increased risk of schizophrenia (N = 3 exposed cases, 95% CI: 0.2-20.0). Further increases in the risk ratio were observed for bipolar disorder (N = 18 exposed cases, RR; 2.7, 95% CI: 1.3-5.6) and post-traumatic stress disorder (N = 18 exposed cases, RR: 1.7, 95% CI: 0.9-3.2) among subjects with the highest exposure levels. The results of this study provide evidence against an impact of early life exposure to PCE on the risk of depression. In contrast, the results provide support for an impact of early life exposure on the risk of bipolar disorder and post-traumatic stress disorder. The number of schizophrenia cases was too small to draw reliable conclusions. These findings should be confirmed in investigations of other similarly exposed populations.
Solvent Hold Tank Sample Results for MCU-16-934-935-936: June 2016 Monthly Sample
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F. F.; Jones, D. H.
2016-08-30
Savannah River National Laboratory (SRNL) received one set of Solvent Hold Tank (SHT) samples (MCU-16-934-935-936), pulled on 07/01/2016 for analysis. The samples were combined and analyzed for composition. Analysis of the composite sample MCU-16-934-935-936 indicated the Isopar™L concentration is above its nominal level (101%). The modifier (CS-7SB) and the TiDG concentrations are 8% and 29 % below their nominal concentrations. This analysis confirms the solvent may require the addition of TiDG, and possibly of modifier. Based on the current monthly sample, the levels of TiDG, Isopar™L, MaxCalix, and modifier are sufficient for continuing operation but are expected to decrease withmore » time. Periodic characterization and trimming additions to the solvent are recommended. No impurities above the 1000 ppm level were found in this solvent by the Semi-Volatile Organic Analysis (SVOA). No impurities were observed in the Hydrogen Nuclear Magnetic Resonance (HNMR). However, up to 21.1 ± 4 micrograms of mercury per gram of solvent (or 17.5 μg/mL) was detected in this sample (as determined by the XRF method of undigested sample). The current gamma level (1.41E5 dpm/mL) confirmed that the gamma concentration has returned to previous levels (as observed in the late 2015 samples) where the process operated normally and as expected.« less
Exposure to volatile organic compounds in healthcare settings
LeBouf, Ryan F; Virji, M Abbas; Saito, Rena; Henneberger, Paul K; Simcox, Nancy; Stefaniak, Aleksandr B
2015-01-01
Objectives To identify and summarise volatile organic compound (VOC) exposure profiles of healthcare occupations. Methods Personal (n=143) and mobile area (n=207) evacuated canisters were collected and analysed by a gas chromatograph/mass spectrometer to assess exposures to 14 VOCs among 14 healthcare occupations in five hospitals. Participants were volunteers identified by their supervisors. Summary statistics were calculated by occupation. Principal component analysis (PCA) was used to reduce the 14 analyte inputs to five orthogonal factors and identify occupations that were associated with these factors. Linear regressions were used to assess the association between personal and mobile area samples. Results Exposure profiles differed among occupations; ethanol had the highest geometric mean (GM) among nursing assistants (~4900 and ~1900 μg/m3, personal and area), and 2-propanol had the highest GM among medical equipment preparers (~4600 and ~2000 μg/m3, personal and area). The highest total personal VOC exposures were among nursing assistants (~9200 μg/m3), licensed practical nurses (~8700 μg/m3) and medical equipment preparers (~7900 μg/m3). The influence of the PCA factors developed from personal exposure estimates varied by occupation, which enabled a comparative assessment of occupations. For example, factor 1, indicative of solvent use, was positively correlated with clinical laboratory and floor stripping/waxing occupations and tasks. Overall, a significant correlation was observed (r=0.88) between matched personal and mobile area samples, but varied considerably by analyte (r=0.23–0.64). Conclusions Healthcare workers are exposed to a variety of chemicals that vary with the activities and products used during activities. These VOC profiles are useful for estimating exposures for occupational hazard ranking for industrial hygienists as well as epidemiological studies. PMID:25011549
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F.; Jones, D.
A trend summary that includes the last two Solvent Hold Tank (SHT) monthly samples is shown; MCU- 17-150-152 (July SHT) and MCU-17-153-155 (August SHT). Since the last SHT sample sent for analysis was the August sample the chemical state of the solvent is best approximated by the chemical analysis of the August SHT sample (MCU-17-153-155). This report mainly focused on the chemical analysis of the August SHT sample. The analysis data from the July SHT sample are presented in the “trend” plots of this report. Analysis of the August SHT sample (MCU-17-153-155) indicated that the modifier (CS-7SB) was 2% belowmore » but the extractant (MaxCalix) concentration was at its nominal recommended level (169,000 mg/L and 46,400 mg/L respectively). The suppressor (TiDG) level has decreased since the last measurement taken while the Modular Caustic-Side Solvent Extraction unit (MCU) was operating in January 2017, but has remained steady in the range of 666 (observed in April) to 715 mg/L (observed in the August 2017 sample) since February 2017, well above the minimum recommended level (479 mg/L), but below the nominal level. The “flat” trends observed in the TiDG, MaxCalix, modifier, and Gamma measurement are consistent with the solvent being idle since January 10, 2017. A strong correlation between density and modifier concentration in the solvent continues to be observed in the SHT samples. This analysis confirms the Isopar™L addition to the solvent in January 2017. This analysis also indicates the solvent did not require further additions. Based on the current monthly sample, the levels of TiDG, Isopar™L, MaxCalix, and modifier are sufficient for continuing operation but are expected to decrease with time if the Modular Caustic-Side Solvent Extraction Unit (MCU) returns to processing radioactive liquid waste. Otherwise, the levels of these components will remain steady. A future Isopar™L trimming addition to the solvent is recommended when MCU resumes processing waste. Two unknown impurities related to the modifier (but not sec-butyl phenol: a modifier degradation product observed before) at the 290 and 110 mg/L levels were observed in the August SHT sample by the Gas - Chromatography-Mass Spectrometry (GC-MS) method. They were observed in a second GC-MS re-run with a new column. Their identification can’t be ascertained at this time. No impurities were observed in the Hydrogen Nuclear Magnetic Resonance (HNMR). Another impurity observed in the samples was mercury. Based on the August SHT sample, up to 23 ± 5 micrograms of mercury per mL of solvent was detected (the average of the Cold Vapor-Atomic Adsorption [CV-AA] and X-Ray Fluorescence [XRF] methods). The higher mercury concentration in the solvent (as determined in the last three-monthly samples) is possibly due to either a higher mercury concentration in Salt Batches 8 and 9 (Tank 49H) . The gamma level (~ 2.0E4 dpm/mL) measured in the August SHT samples was one order of magnitude lower than the gamma levels observed in the December 2016 and January 2017 SHT samples. A similar level was observed in the July SHT sample (MCU-SHT-150-152). The gamma level has remained consistently steady since January 10, 2017 when MCU stopped processing radioactive liquid waste. The laboratory will continue to monitor the quality of the solvent in particularly for any new impurities or degradation of the solvent components.« less
Solvent Hold Tank Sample Results for MCU-16-596-597-598: April 2016 Monthly Sample
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F. F.; Jones, D. H.
2016-07-12
Savannah River National Laboratory (SRNL) received one set of Solvent Hold Tank (SHT) samples (MCU-16-596-597-598), pulled on 04/30/2016 for analysis. The samples were combined and analyzed for composition. Analysis of the composite sample MCU-16-596-597-598 indicated the Isopar™L concentration is above its nominal level (102%). The modifier (CS-7SB) is 14% below its nominal concentration, while the TiDG and MaxCalix concentrations are at and above their nominal concentrations, respectively. This analysis confirms the solvent may require the addition of modifier. Based on the current monthly sample, the levels of TiDG, Isopar™L, MaxCalix, and modifier are sufficient for continuing operation but are expectedmore » to decrease with time. Periodic characterization and trimming additions to the solvent are recommended.« less
Li, Xueqi; Woodman, Michael; Wang, Selina C
2015-08-01
Pheophytins and pyropheophytin are degradation products of chlorophyll pigments, and their ratios can be used as a sensitive indicator of stress during the manufacturing and storage of olive oil. They increase over time depending on the storage condition and if the oil is exposed to heat treatments during the refining process. The traditional analysis method includes solvent- and time-consuming steps of solid-phase extraction followed by analysis by high-performance liquid chromatography with ultraviolet detection. We developed an improved dilute/fluorescence method where multi-step sample preparation was replaced by a simple isopropanol dilution before the high-performance liquid chromatography injection. A quaternary solvent gradient method was used to include a fourth strong solvent wash on a quaternary gradient pump, which avoided the need to premix any solvents and greatly reduced the oil residues on the column from previous analysis. This new method not only reduces analysis cost and time but shows reliability, repeatability, and improved sensitivity, especially important for low-level samples. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
NASA Astrophysics Data System (ADS)
Lee, Yi-Mu; Zheng, Min-Ren
2013-11-01
Chemical sensors based on ZnO nanorod arrays were prepared using chemical bath deposition (CBD) to investigate the sensing performance for the detection of several organic solvents with low concentrations (0.1%, 0.5%, 1%, v/v) at room temperature. High quality and high aspect-ratio (value ˜28) ZnO nanorods have a diameter of about 74 nm and average length of 2.1 μm. Nyquist plots and Bode plots of the ZnO sensors under different organic solvents were obtained by electrical impedance spectroscopy (EIS). The sensing properties such as charge-transfer resistance, double-layer capacitance and dielectric parameters were determined from the impedance spectra to explore the charge transport in low-concentration aqueous solutions. The decreasing trend of the charge-transfer resistance (Rct) as decreasing solvent concentrations is observed, and a straight line at low frequency regime indicates adsorption of water molecules on the oxide surface. The sensitivity of the ZnO sensors was calculated from the resistance variation in target solvents and in deionized water. We demonstrated the use of ZnO nanorod arrays as a chemical sensor capable of generating a different response upon exposure to methanol, ethanol, isopropyl alcohol, acetone and water, wherein the methanol sensing exhibited highest sensitivity. In addition, the ZnO sensor also demonstrates good stability and reproducibility for detection of methanol and ethanol.
Schrode, Benedikt; Bodak, Brigitta; Riegler, Hans; Zimmer, Andreas; Christian, Paul; Werzer, Oliver
2017-09-30
Solubility enhancement and thus higher bioavailability are of great importance and a constant challenge in pharmaceutical research whereby polymorph screening and selection is one of the most important tasks. A very promising approach for polymorph screening is solvent vapor annealing where a sample is exposed to an atmosphere saturated with molecules of a specific chemical/solvent. In this work, amorphous carbamazepine thin films were prepared by spin coating, and the transformation into crystalline forms under exposure to solvent vapors was investigated. Employing grazing incidence X-ray diffraction, four distinct carbamazepine polymorphs, a solvate, and hydrates could be identified, while optical microscopy showed mainly spherulitic morphologies. In vitro dissolution experiments revealed different carbamazepine release from the various thin-film samples containing distinct polymorphic compositions: heat treatment of amorphous samples at 80 °C results in an immediate release; samples exposed to EtOH vapors show a drug release about 5 times slower than this immediate one; and all the others had intermediate release profiles. Noteworthy, even the sample of slowest release has a manifold faster release compared to a standard powder sample demonstrating the capabilities of thin-film preparation for faster drug release in general. Despite the small number of samples in this screening experiment, the results clearly show how solvent vapor annealing can assist in identifying potential polymorphs and allows for estimating their impact on properties like bioavailability.
Roy, Susmita; Bagchi, Biman
2014-05-29
Elucidation of possible pathways between folded (native) and unfolded states of a protein is a challenging task, as the intermediates are often hard to detect. Here, we alter the solvent environment in a controlled manner by choosing two different cosolvents of water, urea, and dimethyl sulfoxide (DMSO) and study unfolding of four different proteins to understand the respective sequence of melting by computer simulation methods. We indeed find interesting differences in the sequence of melting of α helices and β sheets in these two solvents. For example, in 8 M urea solution, β-sheet parts of a protein are found to unfold preferentially, followed by the unfolding of α helices. In contrast, 8 M DMSO solution unfolds α helices first, followed by the separation of β sheets for the majority of proteins. Sequence of unfolding events in four different α/β proteins and also in chicken villin head piece (HP-36) both in urea and DMSO solutions demonstrate that the unfolding pathways are determined jointly by relative exposure of polar and nonpolar residues of a protein and the mode of molecular action of a solvent on that protein.
Carbon disulfide potentiates the effects of impulse noise on the organ of Corti.
Carreres Pons, Maria; Chalansonnet, Monique; Venet, Thomas; Thomas, Aurélie; Nunge, Hervé; Merlen, Lise; Cosnier, Frédéric; Llorens, Jordi; Campo, Pierre
2017-03-01
Occupational noise can damage workers' hearing, and the phenomenon is even more dangerous when noise is associated with an ototoxic solvent. Aromatic solvents are known to provoke chemical-induced hearing loss, but little is known about the effects on hearing of carbon disulfide (CS 2 ) when combined with noise. Co-exposure to CS 2 and noise may have a harmful effect on hearing, but the mechanisms involved are not well understood. For instance, CS 2 is not thought to have a cochleotoxic effect, but rather it is thought to cause retrocochlear hearing impairment. In other words, CS 2 could have a distal neuropathic effect on the auditory pathway. However, a possible pharmacological effect of CS 2 on the central nervous system (CNS) has never been mentioned in the literature. The aim of this study was to assess, in rats, the effects of a noise (continuous vs. impulse), associated with a low concentration of CS 2 [(short-term threshold limit value) x 10 as a safety factor] on the peripheral auditory receptor. The noise, whatever its nature, was an octave band noise centered at 8kHz, and the 250-ppm CS 2 exposure lasted 15min per hour, 6h per day, for 5 consecutive days. The impact of the different experimental conditions on hearing loss was assessed using distortion product oto-acoustic emissions and histological analyses. Although the LEX,8h (8-h time-weighted average exposure) for the impulse noise was lower (84dB SPL) than that for the continuous noise (89dB SPL), it appeared more damaging to the organ of Corti, in particular to the outer hair cells. CS 2 exposure alone did not have any effect on the organ of Corti, but co-exposure to continuous noise with CS 2 was less damaging than exposure to continuous noise alone. In contrast, the cochleo-traumatic effects of impulse noise were significantly enhanced by co-exposure to CS 2 . Therefore, CS 2 can clearly modulate the middle-ear reflex function. In fact, CS 2 may have two distinct effects: firstly, it has a pharmacological effect on the CNS, modifying the trigger of the acoustic reflex; and secondly, it can make the organ of Corti more susceptible to impulse noise. The pharmacological effects on the CNS and the effects of CS 2 on the organ of Corti are discussed to try to explain the overall effect of the solvent on hearing. Once again, the results reported in this article show that the temporal structure (continuous vs. impulse) of noise should be taken into consideration as a key parameter when establishing hearing conservation regulations. Copyright © 2017 Elsevier B.V. All rights reserved.
Bowen, Scott E; Balster, Robert L
2006-05-01
1,1,1-Trichloroethane (TCE), a representative abused solvent, has well described acute behavioral effects in animals. Much less is known about repeated high-concentration exposures as would be encountered in inhalant abusers. Tolerance has been demonstrated in some, but not all, studies with TCE while sensitization has also been seen with other abused solvents. The present study was designed to further characterize changes in the effects of repeated exposure to TCE on a variety of mouse behaviors. Mice were tested using locomotor activity as well as a functional observational battery (FOB) both before and after a regimen of daily exposures to various concentrations of TCE. The initial locomotor effects of acute 30-min exposures to TCE were biphasic with concentration-dependent increases in activity at lower concentrations and decreases observed at higher concentrations. The profile of acute effects as measured by the FOB included changes in posture, decreased arousal, disturbances in gait, delayed righting reflexes, and decreased sensorimotor reactivity. Animals were then divided into five groups and exposed 30 min/day to either air or one of four concentrations of TCE (2,000, 6,000, 10,000, or 13,300 ppm) for 15 consecutive days. The TCE concentration used primarily affected the magnitude of change, not whether tolerance or sensitization occurred. Tolerance developed on the measures of forelimb grip strength, inverted screen, and number of rears. Conversely, sensitization developed to measures of locomotor activity. Depending on the behavioral measure, both tolerance and sensitization can occur in mice with repeated exposure to TCE. Both of these phenomena are characteristic of drugs of abuse.
[Do hearing threshold levels in workers of the furniture industry reflect their exposure to noise?].
Pawlaczyk-Łuszczyńska, Małgorzata; Dudarewicz, Adam; Czaja, Norman; Bortkiewicz, Alicja
The aim of the study was to analyze the hearing status of employees of a furniture factory with respect to their exposure to noise and the presence of additional risk factors of noise-induced hearing loss (NIHL). Noise measurements, questionnaire survey and assessment of hearing, using pure tone audiometry, were carried out in 50 male workers, aged 20-57 years, directly employed in the manufacture of furniture. The actual workers' hearing threshold levels (HTLs) were compared with the predictions calculated according to PN-ISO 1999:2000 based on age, gender and noise exposure. Workers under study were exposed to noise at daily noise exposure levels of 82.7-94.8 dB (mean: 90.9 dB) for a period of 3-14 years. In all subjects, mean HTL at 500 Hz, 1000 Hz, 2000 Hz and 4000 Hz did not exceed 25 dB. Nevertheless, high frequency notches were found in 11% of audiograms. The actual workers' HTLs at 3000-6000 Hz were similar to those predicted using PN-ISO 1999:2000. There were statistical significant differences between HTLs in subgroups of people with higher (> 78 mm Hg) and lower (≤ 78 mm Hg) diastolic blood pressure, smokers and non-smokers, and those working with organic solvents. Hearing loss was more evident in subjects affected by the additional risk factors specified above. The results confirm the need to consider, in addition to noise, also some other NIHL risk factors, such as tobacco smoking, elevated blood pressure, and co-exposure to organic solvents when estimating the risk of NIHL and developing the hearing conservation programs for workers. Med Pr 2016;67(3):337-351. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.
Seidler, A; Hellenbrand, W; Robra, B P; Vieregge, P; Nischan, P; Joerg, J; Oertel, W H; Ulm, G; Schneider, E
1996-05-01
In a case-control study, we investigated the possible etiologic relevance to Parkinson's disease (PD) of rural factors such as farming activity, pesticide exposures, well-water drinking, and animal contacts; toxicologic exposures such as wood preservatives, heavy metals, and solvents; general anesthesia; head trauma; and differences in the intrauterine environment. We recruited 380 patients in nine German clinics, 379 neighborhood control subjects, and 376 regional control subjects in the largest case-control study investigating such factors and collected data in structured personal interviews using conditional logistic regression to control for educational status and cigarette smoking. The latter was strongly inversely associated with PD. There were significantly elevated odds ratios (OR) for pesticide use, in particular, for organochlorines and alkylated phosphates, but no association was present between PD and other rural factors. A significantly elevated OR was present for exposure to wood preservatives. Subjective assessment by the probands indicated that exposure to some heavy metals, solvents, exhaust fumes, and carbon monoxide was significantly more frequent among patients than control subjects, but this was not confirmed by a parallel assessment of job histories according to a job exposure matrix. Patients had undergone general anesthesia and suffered severe head trauma more often than control subjects, but a dose-response gradient was not present. Patients reported a significantly larger number of amalgam-filled teeth before their illness than control subjects. The frequency of premature births and birth order did not differ between patients and control subjects. Patients reported significantly more relatives affected with PD than control subjects. These results support a role for environmental and genetic factors in the etiology of PD.
Unacceptable "occupational" exposure to toxic agents among children in Ecuador.
Harari, R; Forastiere, F; Axelson, O
1997-09-01
To document the problem of child labor as a health issue, we report here three case-studies in Ecuador: exposure to mercury among gold washers, exposure to organophosphates and carbamates in the fruit-growing industry, and exposure to solvents among shoe cleaners. We measured the relevant biological indicators of exposure (mercury in urine, urinary levels of phenols, and acetylcholine esterase in erythrocytes) among selected samples of 10 children for each working place. In all the case studies, the values of the biological indicators showed elevated exposure to well-known toxicants, which are now rare in developed countries, even among adult workers. The findings meld with a previously reported case study of intoxication from inorganic lead among children employed in the manufacture of roof tiles in Ecuador. This study highlights the need to properly evaluate and control the potential health effects due to exposure to toxic substances among children employed in different occupations in several parts of the world.
Bombassei, G J; Kaplan, A A
1992-01-01
Despite numerous reports suggesting a relationship between hydrocarbon exposure and Goodpasture's syndrome, the nature of this association is still undefined. The present review was motivated by a patient with Goodpasture's syndrome who wondered if his illness was employment related. The patient had been working in an automobile servicing garage, where he was in frequent contact with a wide array of hydrocarbon solvents. Previous reports linking hydrocarbon exposure to Goodpasture's syndrome and anti-GBM antibody-mediated nephritis are analysed. A total of seventeen papers presenting 31 patient with hydrocarbon exposure and anti-GBM antibody-mediated disease are reviewed. The results suggest a causal relationship. Specific hydrocarbons implicated as potential toxins are listed, epidemiologic data are reviewed, and the association with cigarette smoking is discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Singh, Surinder; Spiry, Irina; Wood, Benjamin
This report presents system and economic analysis for a carbon-capture unit which uses an aminosilicone-based solvent for CO{sub 2} capture in a pulverized coal (PC) boiler. The aminosilicone solvent is a 60/40 wt/wt mixture of 3-aminopropyl end-capped polydimethylsiloxane (GAP-1m) with tri-ethylene glycol (TEG) as a co-solvent. For comparison purposes, the report also shows results for a carbon-capture unit based on a conventional approach using mono-ethanol amine (MEA). The first year removal cost of CO{sub 2} for the aminosilicone-based carbon-capture process ismore » $46.04/ton of CO2 as compared to $$60.25/ton of CO{sub 2} when MEA is used. The aminosilicone-based process has <77% of the CAPEX of a system using MEA solvent. The lower CAPEX is due to several factors, including the higher working capacity of the aminosilicone solvent compared the MEA, which reduces the solvent flow rate required, reducing equipment sizes. If it is determined that carbon steel can be used in the rich-lean heat exchanger in the carbon capture unit, the first year removal cost of CO{sub 2} decreases to $$44.12/ton. The aminosilicone-based solvent has a higher thermal stability than MEA, allowing desorption to be conducted at higher temperatures and pressures, decreasing the number of compressor stages needed. The aminosilicone-based solvent also has a lower vapor pressure, allowing the desorption to be conducted in a continuous-stirred tank reactor versus a more expensive packed column. The aminosilicone-based solvent has a lower heat capacity, which decreases the heat load on the desorber. In summary, the amino-silicone solvent has significant advantages over conventional systems using MEA.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Roach, Benjamin D.; Williams, Neil J.; Moyer, Bruce A.
As part of the ongoing development of the Next-Generation Caustic-Side Solvent Extraction (NGS) process, the thermal stability of the process solvent was investigated and shown to be adequate for industrial application. The solvent was thermally treated at 35 C over a period of 13 months whilst in dynamic contact with each of the aqueous phases of the current NGS process, namely SRS 15 (a highly caustic waste simulant), sodium hydroxide scrub solution (0.025 M), and boric acid strip solution (0.01 M). The effect of thermal treatment was evaluated by assessing batch extract/scrub/strip performance as a function of time, by monitoringmore » the sodium extraction capacity of the solvent, and by analysis of the solvent using electrospray mass spectrometry. Current studies indicate that the NGS solvent should be thermally robust for a period of XXX months at the Modular Caustic-Side Solvent Extraction Unit (MCU) pilot plant located at Savannah River Site. Furthermore, the guanidine suppressor appears to be the solvent component most significantly impacted by thermal treatment of the solvent, showing significant degradation over time.« less
Roach, Benjamin D.; Williams, Neil J.; Moyer, Bruce A.
2015-09-02
As part of the ongoing development of the Next-Generation Caustic-Side Solvent Extraction (NGS) process, the thermal stability of the process solvent was investigated and shown to be adequate for industrial application. The solvent was thermally treated at 35 C over a period of 13 months whilst in dynamic contact with each of the aqueous phases of the current NGS process, namely SRS 15 (a highly caustic waste simulant), sodium hydroxide scrub solution (0.025 M), and boric acid strip solution (0.01 M). The effect of thermal treatment was evaluated by assessing batch extract/scrub/strip performance as a function of time, by monitoringmore » the sodium extraction capacity of the solvent, and by analysis of the solvent using electrospray mass spectrometry. Current studies indicate that the NGS solvent should be thermally robust for a period of XXX months at the Modular Caustic-Side Solvent Extraction Unit (MCU) pilot plant located at Savannah River Site. Furthermore, the guanidine suppressor appears to be the solvent component most significantly impacted by thermal treatment of the solvent, showing significant degradation over time.« less
Ai, Guomin; Sun, Tong; Dong, Xiuzhu
2014-08-15
Methanol, ethanol, and acetic acid are not easily extracted from aqueous samples and are susceptible to isotope fractionation in gas chromatography/isotope ratio mass spectrometry (GC/IRMS) analysis. Developing a direct dilution GC/IRMS method for aqueous samples, by adjusting the sample concentrations in common solvents to be similar to each other and using a fixed GC split ratio, is very convenient and important because any linearity effects caused by amount-dependent isotope fractionation can be avoided. The suitability of acetonitrile and acetone solvents for the GC/IRMS analysis of pure methanol, ethanol and acetic acid, and commercial liquor and vinegar samples was evaluated using n-hexane and water as control solvents. All the solvents including water were separated from the analyte on a HP-INNOWAX column and were diverted away from the combustion interface. The influence of liquor matrix on the ethanol GC/IRMS analyses was evaluated by adding pure ethanol to liquor samples. Acetonitrile and acetone gave similar δ(13) C values for pure ethanol and pure acetic acid to those obtained in water and n-hexane, and also gave similar δ(13) C values of ethanol in liquor and acetic acid in white vinegar to that obtained in water. For methanol analysis, acetonitrile and refined acetone gave similar δ(13) C values to that obtained in water, but n-hexane was not a suitable solvent. In addition, isotopic fractionation caused by solvent and solute interactions was observed. We recommend using acetonitrile for the GC/IRMS analysis of aqueous alcoholic samples, and acetone for the analysis of aqueous acetic acid samples. This direct dilution method can provide high accurate and precise GC/IRMS analysis of the relative changes in δ(13) C values of methanol, ethanol, and acetic acid. Copyright © 2014 John Wiley & Sons, Ltd.
Blair, A.; Hartge, P.; Stewart, P. A.; McAdams, M.; Lubin, J.
1998-01-01
OBJECTIVES: To extend the follow up of a cohort of 14,457 aircraft maintenance workers to the end of 1990 to evaluate cancer risks from potential exposure to trichloroethylene and other chemicals. METHODS: The cohort comprised civilians employed for at least one year between 1952 and 1956, of whom 5727 had died by 31 December 1990. Analyses compared the mortality of the cohort with the general population of Utah and the mortality and cancer incidence of exposed workers with those unexposed to chemicals, while adjusting for age, sex and calendar time. RESULTS: In the combined follow up period (1952-90), mortality from all causes and all cancer was close to expected (standardised mortality ratios (SMRs) 97 and 96, respectively). Significant excesses occurred for ischaemic heart disease (SMR 108), asthma (SMR 160), and cancer of the bone (SMR 227), whereas significant deficits occurred for cerebrovascular disease (SMR 88), accidents (SMR 70), and cancer of the central nervous system (SMR 64). Workers exposed to trichloroethylene showed non-significant excesses for non-Hodgkin's lymphoma (relative risk (RR) 2.0), and cancers of the oesophagus (RR 5.6), colon (RR 1.4), primary liver (RR 1.7), breast (RR 1.8), cervix (RR 1.8), kidney (RR 1.6), and bone (RR 2.1). None of these cancers showed an exposure- response gradient and RRs among workers exposed to other chemicals but not trichloroethylene often had RRs as large as workers exposed to trichloroethylene. Workers exposed to solvents other than trichloroethylene had slightly increased mortality from asthma, non- Hodgkin's lymphoma, multiple myeloma, and breast cancer. CONCLUSION: These findings do not strongly support a causal link with trichloroethylene because the associations were not significant, not clearly dose-related, and inconsistent between men and women. Because findings from experimental investigations and other epidemiological studies on solvents other than trichloroethylene provide some biological plausibility, the suggested links between these chemicals and non-Hodgkin's lymphoma, multiple myeloma, and breast cancer found here deserve further attention. Although this extended follow up cannot rule out a connection between exposures to solvents and some diseases, it seems clear that these workers have not experienced a major increase in cancer mortality or cancer incidence. PMID:9624267
DOE Office of Scientific and Technical Information (OSTI.GOV)
Peters, T.; Washington, A; . Fondeur, F.
2011-09-29
Savannah River National Laboratory (SRNL) periodically analyses solvent samples from Modular Caustic-Side Solvent Extraction Unit (MCU) in support of continuing operations. A quarterly analysis of the solvent is required to maintain solvent composition within specifications. Analytical results of the analyses of Solvent Hold Tank (SHT) samples MCU-11-314, MCU-11-315, MCU-11-316, MCU-11-317, MCU-11-318 and MCU-11-319 have been previously reported. MCU has experienced a modest decline in cesium removal efficiency while processing the current feed, 'Macrobatch 3'. While the target decontamination factor (DF) is 200, the fiscal year 2011 DF average is 161. The results of the prior solvent analysis report did notmore » identify a specific factor that would correlate with the poor cesium decontamination beyond a low concentration of the suppressor, trioctylamine. New analyses of the quarterly sample are reported in this document, as well as a cross-check of {sup 137}Cs measurements for SRNL and F/H lab. Furthermore, in an attempt to discover the reason for the decline in DF at MCU, SRNL was tasked with analyzing numerous Caustic Wash Tank (CWT) and chemical feed samples.« less
Trichloroethylene (TCE) is a neurotoxic volatile organic compound (VOC) that is produced in large quantities as a degreasing agent and general solvent, and it appears on the list of 188 HAPs specified by the Clean Air Act Amendments of 1990. TCE was selected as a model VOC for de...
A patient with serum creatinine of 61 mg/dl
Sriram, S.; Srinivas, S.; Naveen, P. S. R.
2017-01-01
Spurious elevation of serum creatinine by Jaffe assay is known to occur due to a variety of substances. This results in subjecting the patient to invasive and complicated procedures such as dialysis. We report a rare case of false elevation of this renal parameter following exposure to an organic solvent. PMID:28182048
Grzybowski, Marek; Taki, Masayasu; Yamaguchi, Shigehiro
2017-09-21
The substitution of an oxygen atom in rhodols with a phosphine oxide (P=O) moiety affords P=O-bridged rhodols as a new type of near-infrared (NIR) fluorophore. This compound class can be readily accessed upon exposure of the corresponding rhodamines to aqueous basic conditions. The electron-withdrawing effect of the P=O group facilitates the hydrolytic deamination, and, moreover, prolonged exposure to aqueous basic conditions generates P=O-bridged fluoresceins, that is, a series of three P=O-bridged xanthene dyes is available in one simple operation. The P=O-bridged rhodols show significant bathochromic shifts of the longest-wavelength absorption maximum (Δλ=125 nm; >3600 cm -1 ) upon changing the solvent from toluene to water, whereas the emission is shifted less drastically (Δλ=70 nm; 1600 cm -1 ). The hydrogen bonding between the P=O and C=O groups with protic solvents results in substantial stabilization of the LUMO level, which is responsible for the solvatochromism. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
Method of analysis of polymerizable monomeric species in a complex mixture
Hermes, Robert E
2014-03-18
Method of selective quantitation of a polymerizable monomeric species in a well spacer fluid, said method comprising the steps of adding at least one solvent having a refractive index of less than about 1.33 to a sample of the complex mixture to produce a solvent phase, and measuring the refractive index of the solvent phase.
Influence of solvents on the habit modification of alpha lactose monohydrate single crystals
NASA Astrophysics Data System (ADS)
Parimaladevi, P.; Srinivasan, K.
2013-02-01
Restricted evaporation of solvent method was adopted for the growth of alpha lactose monohydrate single crystals from different solvents. The crystal habits of grown crystals were analysed. The form of crystallization was confirmed by powder x-ray diffraction analysis. Thermal behaviour of the grown crystals was studied by using differential scanning calorimetry.
Padró, Juan M; Pellegrino Vidal, Rocío B; Echevarria, Romina N; Califano, Alicia N; Reta, Mario R
2015-05-01
Chagas disease constitutes a major public health problem in Latin America. Human breast milk is a biological sample of great importance for the analysis of therapeutic drugs, as unwanted exposure through breast milk could result in pharmacological effects in the nursing infant. Thus, the goal of breast milk drug analysis is to inquire to which extent a neonate may be exposed to a drug during lactation. In this work, we developed an analytical technique to quantify benznidazole and nifurtimox (the two antichagasic drugs currently available for medical treatment) in human breast milk, with a simple sample pretreatment followed by an ionic-liquid-based dispersive liquid-liquid microextraction combined with high-performance liquid chromatography and UV detection. For this technique, the ionic liquid 1-octyl-3-methylimidazolium hexafluorophosphate has been used as the "extraction solvent." A central composite design was used to find the optimum values for the significant variables affecting the extraction process: volume of ionic liquid, volume of dispersant solvent, ionic strength, and pH. At the optimum working conditions, the average recoveries were 77.5 and 89.7%, the limits of detection were 0.06 and 0.09 μg/mL and the interday reproducibilities were 6.25 and 5.77% for benznidazole and nifurtimox, respectively. The proposed methodology can be considered sensitive, simple, robust, accurate, and green. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Li, Zhenjiang; Wang, Bin; Ge, Shufang; Yan, Lailai; Liu, Yingying; Li, Zhiwen; Ren, Aiguo
2016-12-01
Polycyclic aromatic hydrocarbons (PAHs), nicotine, cotinine, and metals in human hair have been used as important environmental exposure markers. We aimed to develop a simple method to simultaneously analyze these pollutants using a small quantity of hair. The digestion performances of tetramethylammonium hydroxide (TMAH) and sodium hydroxide (NaOH) for human hair were compared. Various solvents or their mixtures including n-hexane (HEX), dichloromethane (DCM) and trichloromethane (TCM), HEX:DCM32 (3/2) and HEX:TCM73 (7/3) were adopted to extract organics. The recoveries of metals were determined under an optimal operation of digestion and extraction. Our results showed that TMAH performed well in dissolving human hair and even better than NaOH. Overall, the recoveries for five solutions were acceptable for PAHs, nicotine in the range of 80%-110%. Except for HEX, other four extraction solutions had acceptable extraction efficiency for cotinine from HEX:TCM73 (88 ± 4.1%) to HEX:DCM32 (100 ± 2.8%). HEX:DCM32 was chosen as the optimal solvent in consideration of its extraction efficiency and lower density than water. The recoveries of 12 typical major or trace metals were mainly in the range of 90%-110% and some of them were close to 100%. In conclusion, the simultaneous analysis of PAHs, nicotine, cotinine, and metals was feasible. Our study provided a simple and low-cost technique for environmental epidemiological studies. Copyright © 2016 Elsevier Ltd. All rights reserved.
Dai, Yuntao; Rozema, Evelien; Verpoorte, Robert; Choi, Young Hae
2016-02-19
Natural deep eutectic solvents (NADES) have attracted a great deal of attention in recent times as promising green media. They are generally composed of neutral, acidic or basic compounds that form liquids of high viscosity when mixed in certain molar ratio. Despite their potential, viscosity and acid or basic nature of some ingredients may affect the extraction capacity and stabilizing ability of the target compounds. To investigate these effects, extraction with a series of NADES was employed for the analysis of anthocyanins in flower petals of Catharanthus roseus in combination with HPLC-DAD-based metabolic profiling. Along with the extraction yields of anthocyanins their stability in NADES was also studied. Multivariate data analysis indicates that the lactic acid-glucose (LGH), and 1,2-propanediol-choline chloride (PCH) NADES present a similar extraction power for anthocyanins as conventional organic solvents. Furthermore, among the NADES employed, LGH exhibits an at least three times higher stabilizing capacity for cyanidins than acidified ethanol, which facilitates their extraction and analysis process. Comparing NADES to the conventional organic solvents, in addition to their reduced environmental impact, they proved to provide higher stability for anthocyanins, and therefore have a great potential as possible alternatives to those organic solvents in health related areas such as food, pharmaceuticals and cosmetics. Copyright © 2016 Elsevier B.V. All rights reserved.
Solvent Effects of Model Polymeric Corrosion Control Coatings on Water Transport and Corrosion Rate
NASA Astrophysics Data System (ADS)
Konecki, Christina
Industrial coating formulations are often made for volatile organic content compliance and ease of application, with little regard for the solvent impact on resultant performance characteristics. Our research objective was to understand the effect of both solvent retention and chemical structure on water transport through polymer films and resultant corrosion area growth of coated steel substrates. A clear, unpigmented Phenoxy(TM) thermoplastic polymer (PKHH) was formulated into resin solutions with three separate solvent blends selected by Hansen solubility parameter (HSP), boiling point, and ability to solubilize PKHH. Polymer films cast from MEK/PGME (methyl ethyl ketone/ propylene glycol methyl ether), dried under ambient conditions (AMB, > 6wt.% residual solvent) produced a porous morphology, which resulted in a corrosion area greater than 50%. We attributed this to the water-soluble solvent used in film preparation, which enabled residual PGME to be extracted by water. The resin solution prepared with CYCOH/DXL (Cyclohexanol/ 1,3 dioxolane) was selected because CYCOH is a solid at room temperature which acts as a pigment in the final film. Therefore, increasing the tortuosity of water transport, as well as a high hydrogen bonding character, which caused more interactions with water, slowing diffusion, producing a nodular morphology, and 37% less corrosion area than MEK/PGME AMB. The HSP of PKHH and EEP (ethyl 3-ethoxypropionate) are within 5% of each other, which produced a homogeneous morphology and resulted in comparable corrosion rates regardless of residual solvent content. We utilized electrochemical techniques and attenuated total reflectance- Fourier transform infrared spectroscopy to elucidate dynamic water absorption and solvent extraction in the exposed model formulations. We found that water absorption resulted in a loss of barrier properties, and increased corrosion due to the voids formed by solvent extraction. The polymer films were rejuvenated (removal of water) as an attempt to decrease the number of water transport pathways during exposure. Results found that samples rejuvenated at temperatures above the glass transition temperature of the samples achieved lower moisture content and consequently, lower corrosion growth rates. In commercial systems, rejuvenation lowered the corrosion rate up to 60% indicating better coating formulations and maintenance cycles would control the corrosion rate.
Solvent Hold Tank Sample Results for MCU-16-1247-1248-1249: August 2016 Monthly Sample
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F. F.; Jones, D. H.
Savannah River National Laboratory (SRNL) received one set of Solvent Hold Tank (SHT) samples (MCU-16-1247-1248-1249), pulled on 08/22/2016 for analysis. The samples were combined and analyzed for composition. Analysis of the composite sample MCU-16-1247-1248-1249 indicated the Isopar™L concentration is above its nominal level (101%). The extractant (MaxCalix) and the modifier (CS-7SB) are 7% and 9 % below their nominal concentrations. The suppressor (TiDG) is 63% below its nominal concentration. This analysis confirms the solvent may require the addition of TiDG, and possibly of modifier and MaxCalix to restore then to nominal levels. Based on the current monthly sample, the levelsmore » of TiDG, Isopar™L, MaxCalix, and modifier are sufficient for continuing operation but are expected to decrease with time. Periodic characterization and trimming additions to the solvent are recommended. At the time of writing this report, A solvent trim batch containing TiDG, modifier and MaxCalix, was added to the SHT (October 2016) and expect the concentration of these components to be at their nominal values.« less
Cheng, Wen-Hsi; Huang, Hsiao-Lin; Chen, Kang-Shin; Chang, Yu-Jen
2017-10-15
The objective of this study was to measure the emission of, and personal exposure to workers, volatile organic compound (VOC) during paint spraying on a construction site. Needle trap samplers (NTSs), which are a green solid phase microextraction sampling technology, were used to obtain air samples at a large music exhibition center. The standard active sampling method using charcoal tubes and a personal air pump, Method 1501, was simultaneously utilized at the sampling sites to assess the workers' VOC exposures. Analysis of the data thus obtained showed that benzene, toluene, ethylenebenzene, and xylenes (BTEXs) were the main emission compounds. Acetone and isobutyl alcohol, which are used as thinning solvents, were detected as minor emission compounds. The emitted concentrations of most compounds were lower than the legal emission limits in Taiwan except that of benzene, for which the 2-ppm time weighted average short-term exposure limit was exceeded. The packed divinylbenzene (DVB) in the NTS was observed under an environmental scanning electron microscope, and many fine aerosols were found to be deposited on the surface of the DVB adsorbents, causing VOC extraction efficiencies after the fifth sampling in the field to decline. Workers on construction sites should be protected from emissions of VOC and fine particulates to preserve their occupational health.
Constituent bioconcentration in rainbow trout exposed to a complex chemical mixture
DOE Office of Scientific and Technical Information (OSTI.GOV)
Linder, G.; Bergman, H.L.; Meyer, J.S.
1984-09-01
Classically, aquatic contaminant fate models predicting a chemical's bioconcentration factor (BCF) are based upon single-compound derived models, yet such BCF predictions may deviate from observed BCFs when physicochemical interactions or biological responses to complex chemical mixture exposures are not adequately considered in the predictive model. Rainbow trout were exposed to oil-shale retort waters. Such a study was designed to model the potential biological effects precluded by exposure to complex chemical mixtures such as solid waste leachates, agricultural runoff, and industrial process waste waters. Chromatographic analysis of aqueous and nonaqueous liquid-liquid reservoir components yielded differences in mixed extraction solvent HPLC profilesmore » of whole fish exposed for 1 and 3 weeks to the highest dilution of the complex chemical mixture when compared to their corresponding control, yet subsequent whole fish extractions at 6, 9, 12, and 15 weeks into exposure demonstrated no qualitative differences between control and exposed fish. Liver extractions and deproteinized bile samples from exposed fish were qualitatively different than their corresponding controls. These findings support the projected NOEC of 0.0045% dilution, even though the differences in bioconcentration profiles suggest hazard assessment strategies may be useful in evaluating environmental fate processes associated with complex chemical mixtures. 12 references, 4 figures, 2 tables.« less
D'Autry, Ward; Zheng, Chao; Bugalama, John; Wolfs, Kris; Hoogmartens, Jos; Adams, Erwin; Wang, Bochu; Van Schepdael, Ann
2011-07-15
Residual solvents are volatile organic compounds which can be present in pharmaceutical substances. A generic static headspace-gas chromatography analysis method for the identification and control of residual solvents is described in the European Pharmacopoeia. Although this method is proved to be suitable for the majority of samples and residual solvents, the method may lack sensitivity for high boiling point residual solvents such as N,N-dimethylformamide, N,N-dimethylacetamide, dimethyl sulfoxide and benzyl alcohol. In this study, liquid paraffin was investigated as new dilution medium for the analysis of these residual solvents. The headspace-gas chromatography method was developed and optimized taking the official Pharmacopoeia method as a starting point. The optimized method was validated according to ICH criteria. It was found that the detection limits were below 1μg/vial for each compound, indicating a drastically increased sensitivity compared to the Pharmacopoeia method, which failed to detect the compounds at their respective limit concentrations. Linearity was evaluated based on the R(2) values, which were above 0.997 for all compounds, and inspection of residual plots. Instrument and method precision were examined by calculating the relative standard deviations (RSD) of repeated analyses within the linearity and accuracy experiments, respectively. It was found that all RSD values were below 10%. Accuracy was checked by a recovery experiment at three different levels. Mean recovery values were all in the range 95-105%. Finally, the optimized method was applied to residual DMSO analysis in four different Kollicoat(®) sample batches. Copyright © 2011 Elsevier B.V. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tantawy, Hesham Ramzy; Aston, D. Eric, E-mail: aston@uidaho.edu; Kengne, Blaise-Alexis F.
2015-11-07
An in-depth analysis of the chemical functionality in HCl-doped polyaniline (PANI) nanopowders is discussed through interpretations of x-ray photoelectron spectra. The distinctions between three PANI sample types, produced under varied synthesis conditions, are compared on the basis correlations between newly collected electron spectra for chemical analysis (or also x-ray photoelectron spectroscopy) and electromagnetic (EM) shielding effectiveness (SE) within two frequency bands (100–1500 MHz and ∼2–14 GHz). The findings are discussed with reference to previous data analysis of electrical conductivities and Raman and UV-vis spectra analyzed from replicates of the same PANI nanopowders, where only the 8–12 GHz range for SE was tested.more » They further corroborate previous results for limited-solvent conditions that enhance EM shielding. The three nanopowder types show distinctive differences in polaron, bipolaron, and polar lattice contributions. The collective findings describe the chemical connections between controlling and, most importantly, limiting the available solvent for polymerization with simultaneously doping and how it is that the newly developed solvent-limited approach for HCl-PANI nanopowders provides better shielding than traditionally solvent-rich methods by having more extended and perhaps even faster polaron delocalization than other PANI-based products. The maximum oxidation (50%) and doping (49%) levels obtained in the solvent-free nanopowders also produced the highest SE values of 37.3 ± 3.7 dB (MHz band) and 68.6 ± 4.6 dB (GHz band)« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fondeur, F. F.; Jones, D. H.
A trend summary of three Solvent Hold Tank (SHT) monthly samples; MCU-16-1488-1493 (December 2016), MCU-17-86-88 (January 2017), and MCU-17-119-121 (February 2017) are reported. Analyses indicate that the modifier (CS-7SB) and the extractant (MaxCalix) concentrations are at their nominal recommended levels (169,000 mg/L and 46,300 mg/L respectively). The suppressor (TiDG) level has decreased to a steady state level of 673 mg/L well above the minimum recommended level (479 mg/L). This analysis confirms the Isopar™ addition to the solvent in January 18, 2017. This analysis also indicates the solvent did not require further additions. Based on the current monthly sample, the levelsmore » of TiDG, Isopar™L, MaxCalix, and modifier are sufficient for continuing operation but are expected to decrease with time. Periodic characterization and trimming additions to the solvent are recommended. No impurities above the 1000 ppm level were found in this solvent by the Semi-Volatile Organic Analysis (SVOA). No impurities were observed in the Hydrogen Nuclear Magnetic Resonance (HNMR). Another impurity observed in the samples was mercury. Up to 38 ± 8 micrograms of mercury per mL of solvent was detected in these samples (the average of the CV-AA and XRF methods). The higher mercury concentration in the solvent (as determined in the last three monthly samples) is possibly due to the higher mercury concentration in Salt Batches 8 and 9 (Tank 49H) or mixing of previously undisturbed areas of high mercury concentration in Tank 49H. The gamma level (0.21E5 dpm/mL) measured in the February SHT sample was one order of magnitude lower than the gamma levels observed in the December and January SHT samples. The February gamma level is consistent with the solvent being idle (since January 10, 2017). The gamma levels observed in the December and January SHT samples were consistent with previous monthly measurements where the process operated normally. The laboratory will continue to monitor the quality of the solvent in particular for any new impurities or degradation of the solvent components.« less
Ozonation of Canadian Athabasca asphaltene
NASA Astrophysics Data System (ADS)
Cha, Zhixiong
Application of ozonation in the petrochemical industry for heavy hydrocarbon upgrading has not been sufficiently explored. Among heavy hydrocarbons, asphaltenes are the heaviest and the most difficult fractions for analysis and treatment. Therefore, ozonation of asphaltenes presents an interesting application in the petrochemical industry. Commercial application of ozonation in the petrochemical industry has three obstacles: availability of an ozone-resistant and environmentally friendly solvent, the precipitation of ozonation intermediates during reaction, and recovery of the solvent and separation of the ozonation products. Preliminary ozonation of Athabasca oil sands asphaltene in nonparticipating solvents encountered serious precipitation of the ozonation intermediates. The precipitated intermediates could be polymeric ozonides and intermolecular ozonides or polymeric peroxides. Because the inhomogeneous reaction medium caused low ozone efficiency, various participating solvents such as methanol and acetic acid were added to form more soluble hydroperoxides. The mass balance results showed that on average, one asphaltene molecule reacted with 12 ozone molecules through the electrophilic reaction and the subsequent decomposition of ozonation intermediates generated acetone extractable products. GC/MS analysis of these compounds indicated that the free radical reactions could be important for generation of volatile products. The extensively ozonated asphaltene in the presence of participating solvents were refluxed with methanol to generate more volatile products. GC/MS analysis of the methanol-esterified ozonation products indicated that most volatile products were aliphatic carboxylic acid esters generated through cleavage of substituents. Reaction kinetics study showed that asphaltene ozonation was initially a diffusion rate-controlled reaction and later developed to a chemical reaction rate-controlled reaction after depletion of the reactive aromatic sites. Two new solvent systems, a self-sustaining ozonation system and a cyclohexane/acetone/water or a cyclohexane/acetone/methanol system, were studied to overcome the drawback of using halogenated solvents. The self-sustaining ozonation process employed the final ozonation products as the reaction solvent. Compared to the self-sustaining ozonation, the cyclohexane solvent system showed higher ozone efficiency; however, it required dynamic adjustment of the solvent system during ozonation. An extensively ozonated asphaltene's weight would be doubled. Distillation of the products separated about 45% volatile products having biodiesel-style chemical structures. Compared to distillation, more than 90% of the ozonation products were extractable by acetone. The remaining acetone-insoluble part was further classified by dichloromethane and other solvents of different polarities. The separated ozonation products were good fuel additives or materials for other products.
Kanematsu, Yusuke; Tachikawa, Masanori
2014-04-28
We have developed the multicomponent hybrid density functional theory [MC_(HF+DFT)] method with polarizable continuum model (PCM) for the analysis of molecular properties including both nuclear quantum effect and solvent effect. The chemical shifts and H/D isotope shifts of the picolinic acid N-oxide (PANO) molecule in chloroform and acetonitrile solvents are applied by B3LYP electron exchange-correlation functional for our MC_(HF+DFT) method with PCM (MC_B3LYP/PCM). Our MC_B3LYP/PCM results for PANO are in reasonable agreement with the corresponding experimental chemical shifts and isotope shifts. We further investigated the applicability of our method for acetylacetone in several solvents.
Occupational brain cancer risks in Umbria (Italy), with a particular focus on steel foundry workers.
Oddone, Enrico; Scaburri, Alessandra; Bai, Edoardo; Modonesi, Carlo; Stracci, Fabrizio; Marchionna, Giuliano; Crosignani, Paolo; Imbriani, Marcello
2014-01-01
As a part of the Occupational Cancer Monitoring (OCCAM) project, a routine analysis based on Umbria region cancer registry (RTUP) database in 2002-2008 was performed. Among other results, the incidental finding of brain cancer increased risk in steel foundry workers in Terni province (Italy), lead us to deepen the analysis, focusing on this specific industrial sector. A monitoring study, based on Umbria Regional Cancer Registry data, was recently carried out. Brain cancer cases and controls identified within this preliminary study were selected. Therefore, we considered all incident cases (in Umbria region 2002-2008) of brain cancer occurred among workers occupied for at least one year in private companies since 1974 and controls randomly sampled from the same population. Afterwards, taking in to account results from steel foundry in Terni province, we further deepened our analysis, focusing on this productive sector. Odds ratios (ORs) and corresponding 90% confidence intervals (CIs) were calculated using multiple logistic regression models, adjusted by age at diagnosis or sampling, sex and province of residence, when appropriate. Statistical analyses were carried out on 14913 subjects, 56 cases and 14857 controls. Significantly increased ORs were observed for garment, mechanical manufacturing and chemical industries. Moreover, the risk estimates were strongly correlated with exposures in iron and steel foundries and a cluster of 14 cases in the same foundry in Terni was observed (OR 9.59, 90% CI 2.76-33.34). Results of this explorative study showed increased ORs of brain cancer in some productive branches, involving possible exposures to chemical compounds and/or solvents. Moreover, our results pointed out a significantly increased risk in Terni foundry workers, determining an interesting brain cancer cluster (14 cases). Further studies on this industrial sector are needed with improved definitions of tasks and exposures.
Kucharska, Agnieszka; Covaci, Adrian; Vanermen, Guido; Voorspoels, Stefan
2015-02-01
In this study, we investigated the hypothesis whether externally adsorbed and internally deposited flame retardants (FRs) in hair could be distinguished. To this extent, hair samples collected from one volunteer were exposed under controlled conditions to phosphate FR (PFR) and polybrominated diphenyl ether (PBDE) standards to mimic external contamination. Afterwards, suitable washing procedures to selectively remove contaminants from the hair surface were investigated. The samples were measured by GC-(ECNI)-MS for PBDEs and LC-(ESI+)-MS/MS for PFRs. All investigated compounds were transferred onto the hair surface. One of the most important finding was that dust particles are not mandatory to transfer compounds on the hair surface and to be able to measure high levels of compounds in human hair. To assess different protocols to selectively remove external contamination, the exposed hair samples were washed in different media before analysis: water, methanol, hexane:dichloromethane (1:1, v/v), acetone and shampoo. Results indicated that there is no washing medium able to entirely and exclusively remove external contamination. Among investigated media, methanol removed a meaningful part of the external contamination (42-105%), but the removal efficiencies differed among compounds. We therefore concluded that hair should not be washed prior to analysis and in case of visible contamination (e.g. with cosmetic products), water would be the recommended agent. Organic solvents should not be used for the washing step. Although it is impossible to distinguish external from internal exposure, hair samples may be used as valuable biomarker of human exposure, providing a measure of integral exposure. To the best of our knowledge, this is the first study which has used externally exposed hair samples to PBDEs and PFRs. Copyright © 2014 Elsevier B.V. All rights reserved.
Anion-π aromatic neutral tweezers complexes: are they stable in polar solvents?
Sánchez-Lozano, Marta; Otero, Nicolás; Hermida-Ramón, Jose M; Estévez, Carlos M; Mandado, Marcos
2011-03-17
The impact of the solvent environment on the stabilization of the complexes formed by fluorine (T-F) and cyanide (T-CN) substituted tweezers with halide anions has been investigated theoretically. The study was carried out using computational methodologies based on density functional theory (DFT) and symmetry adapted perturbation theory (SAPT). Interaction energies were obtained at the M05-2X/6-31+G* level. The obtained results show a large stability of the complexes in solvents with large dielectric constant and prove the suitability of these molecular tweezers as potential hosts for anion recognition in solution. A detailed analysis of the effects of the solvent on the electron withdrawing ability of the substituents and its influence on the complex stability has been performed. In particular, the interaction energy in solution was split up into intermonomer and solvent-complex terms. In turn, the intermonomer interaction energy was partitioned into electrostatic, exchange, and polarization terms. Polar resonance structures in T-CN complexes are favored by polar solvents, giving rise to a stabilization of the intermonomer interaction, the opposite is found for T-F complexes. The solvent-complex energy increases with the polarity of the solvent in T-CN complexes, nonetheless the energy reaches a maximum and then decreases slowly in T-F complexes. An electron density analysis was also performed before and after complexation, providing an explanation to the trends followed by the interaction energies and their different components in solution.
Su, Feng-Chiao; Mukherjee, Bhramar; Batterman, Stuart
2015-01-01
Exposures to volatile organic compounds (VOCs) are ubiquitous due to emissions from personal, commercial and industrial products, but quantitative and representative information regarding long term exposure trends is lacking. This study characterizes trends from1988 to 2004 for the 15 VOCs measured in blood in five cohorts of the National Health and Nutrition Examination Survey (NHANES), a large and representative sample of U.S. adults. Trends were evaluated at various percentiles using linear quantile regression (QR) models, which were adjusted for solvent-related occupations and cotinine levels. Most VOCs showed decreasing trends at all quantiles, e.g., median exposures declined by 2.5 (m, p-xylene) to 6.4 (tetrachloroethene) percent per year over the 15 year period. Trends varied by VOC and quantile, and were grouped into three patterns: similar decreases at all quantiles (including benzene, toluene); most rapid decreases at upper quantiles (ethylbenzene, m, p-xylene, o-xylene, styrene, chloroform, tetrachloroethene); and fastest declines at central quantiles (1,4-dichlorobenzene). These patterns reflect changes in exposure sources, e.g., upper-percentile exposures may result mostly from occupational exposure, while lower percentile exposures arise from general environmental sources. Both VOC emissions aggregated at the national level and VOC concentrations measured in ambient air also have declined substantially over the study period and are supportive of the exposure trends, although the NHANES data suggest the importance of indoor sources and personal activities on VOC exposures. While piecewise QR models suggest that exposures of several VOCs decreased little or any during the 1990’s, followed by more rapid decreases from 1999 to 2004, questions are raised concerning the reliability of VOC data in several of the NHANES cohorts and its applicability as an exposure indicator, as demonstrated by the modest correlation between VOC levels in blood and personal air collected in the 1999/2000 cohort. Despite some limitations, the NHANES data provides a unique, long term and direct measurement of VOC exposures and trends. PMID:25705111
NASA Astrophysics Data System (ADS)
Xia, Bing; Gao, Yuanji; Ji, Baocheng; Ma, Fengwei; Ding, Lisheng; Zhou, Yan
2018-03-01
Electrospray ionization mass spectrometry (ESI-MS) technique has limitations in analysis of compounds that are dissolved in nonpolar solvents. In this study, ambient ionization of compounds in solvents that are not "friendly" to electrospray ionization, such as n-hexane, is achieved by conductive nanomaterials spray ionization (CNMSI) on nanomaterial emitters, including carbon nanotubes paper and mesodendritic silver covered metal, which applies high voltages to emitters made of these materials without the assistance of polar solvents. Although the time intensity curves (TIC) commonly vary from 4.5% to 23.7% over analyses, protonated molecular ions were found to be the most abundant species, demonstrating good reproducibility of the technique in terms of ionized species. Higher mass spectrometric responses are observed in analyzing nonpolar systems than polar systems. 2-Methoxyacetophenone, 4-methylacetophenone, benzothiazole, quinolone, and cycloheptanone as low as 2 pg in n-hexane can be directly detected using the developed method. The developed technique expands the analysis capability of ESI-MS for direct, online analysis of nonpolar systems, such as low polarity extracts, normal phase liquid chromatography eluates, and synthetic mixtures. [Figure not available: see fulltext.
Keer, Sam; McLean, Dave; Glass, Bill; Douwes, Jeroen
2018-03-12
To assess the association between the use of personal protective equipment (PPE) and good workplace hygiene and symptoms of neurotoxicity in solvent-exposed vehicle spray painters. Exposure control measures including PPE-use and workplace hygiene practices and symptoms of neurotoxicity were assessed in 267 vehicle repair spray painters. Symptoms were assessed using an adapted version of the EUROQUEST Questionnaire. Frequent respirator and glove use was inversely and significantly associated with symptoms of neurotoxicity in a dose-dependent manner (P < 0.05 for trend) with the strongest protective effect found for consistent glove use (odds ratios [OR] 0.1-0.2, P < 0.01, for reporting ≥10 and ≥5 symptoms). A clear dose-response trend was also observed when combining frequency of respirator and glove use (P < 0.05 for reporting ≥5 and ≥10 symptoms), with an overall reduction in risk of 90% (OR, 0.1, P < 0.01) for those who consistently used both types of PPE. Protective effects were most pronounced for the symptom domains of psychosomatic (P < 0.05 for trend, for combined PPE use), mood (P < 0.05), and memory and concentration symptoms combined (P < 0.05), with reductions in risk of >80%. Poor hygiene workplace practices, such as solvent exposure to multiple body parts (OR 3.4, P = 0.11 for reporting ≥10 symptoms), were associated with an increased risk of symptoms. When using a general workplace hygiene score derived from a combination of PPE-use and (good) workplace practice factors an inverse and significant dose-response trend was observed for reporting ≥5 (P < 0.01) and ≥10 symptoms (P < 0.01). This study has shown that PPE-use and good workplace hygiene are associated with a strongly reduced risk of symptoms of neurotoxicity in solvent-exposed vehicle spray painters.
Infrared Database for Process Support Materials
NASA Technical Reports Server (NTRS)
Bennett, K. E.; Boothe, R. E.; Burns, H. D.
2003-01-01
Process support materials' compatibility with cleaning processes is critical to ensure final hardware cleanliness and that performance requirements are met. Previous discovery of potential contaminants in process materials shows the need for incoming materials testing and establishment of a process materials database. The Contamination Control Team of the Materials, Processes, and Manufacturing (MP&M) Department at Marshall Space Flight Center (MSFC) has initiated the development of such an infrared (IR) database, called the MSFC Process Materials IR database, of the common process support materials used at MSFC. These process support materials include solvents, wiper cloths, gloves, bagging materials, etc. Testing includes evaluation of the potential of gloves, wiper cloths, and other items to transfer contamination to handled articles in the absence of solvent exposure, and the potential for solvent exposure to induce material degradation. This Technical Memorandum (TM) summarizes the initial testing completed through December 2002. It is anticipated that additional testing will be conducted with updates provided in future TMs.Materials were analyzed using two different IR techniques: (1) Dry transference and (2) liquid extraction testing. The first of these techniques utilized the Nicolet Magna 750 IR spectrometer outfitted with a horizontal attenuated total reflectance (HATR) crystal accessory. The region from 650 to 4,000 wave numbers was analyzed, and 50 scans were performed per IR spectrum. A dry transference test was conducted by applying each sample with hand pressure to the HATR crystal to first obtain a spectrum of the parent material. The material was then removed from the HATR crystal and analyzed to determine the presence of any residues. If volatile, liquid samples were examined both prior to and following evaporation.The second technique was to perform an extraction test with each sample in five different solvents.Once the scans were complete for both the dry transference and the extraction tests, the residue from each scan was interpreted.
Parks, Christine G; Hoppin, Jane A; De Roos, Anneclaire J; Costenbader, Karen H; Alavanja, Michael C; Sandler, Dale P
2016-11-01
Farming has been associated with rheumatoid arthritis (RA), but the role of pesticides is not known. We examined associations between RA and pesticides or other agricultural exposures among female spouses of licensed pesticide applicators in the Agricultural Health Study. Women were enrolled between 1993 and 1997 and followed through 2010. Cases (n = 275 total, 132 incident), confirmed by a physician or by self-reported use of disease modifying antirheumatic drugs, were compared with noncases (n = 24,018). Odds ratios (OR) and 95% confidence intervals (CI) were estimated using logistic regression models adjusted for age, state, and smoking pack-years. Overall, women with RA were somewhat more likely to have reported lifetime use of any specific pesticide versus no pesticides (OR = 1.4; 95% CI: 1.0, 1.6). Of the 15 pesticides examined, maneb/mancozeb (OR = 3.3; 95% CI: 1.5, 7.1) and glyphosate (OR = 1.4; 95% CI: 1.0, 2.1) were associated with incident RA compared with no pesticide use. An elevated, but non-statistically significant association with incident RA was seen for DDT (OR = 1.9; 95% CI: 0.97, 3.6). Incident RA was also associated with the application of chemical fertilizers (OR = 1.7; 95% CI: 1.1, 2.7) and cleaning with solvents (OR = 1.6; 95% CI: 1.1, 2.4), but inversely associated with lifetime livestock exposure as a child and adult (OR = 0.48; 95% CI: 0.24, 0.97) compared with no livestock exposure. Our results suggest that specific agricultural pesticides, solvents, and chemical fertilizers may increase the risk of RA in women, while exposures involving animal contact may be protective. Citation: Parks CG, Hoppin JA, De Roos AJ, Costenbader KH, Alavanja MC, Sandler DP. 2016. Rheumatoid arthritis in Agricultural Health Study spouses: associations with pesticides and other farm exposures. Environ Health Perspect 124:1728-1734; http://dx.doi.org/10.1289/EHP129.
Parks, Christine G.; Hoppin, Jane A.; De Roos, Anneclaire J.; Costenbader, Karen H.; Alavanja, Michael C.; Sandler, Dale P.
2016-01-01
Background: Farming has been associated with rheumatoid arthritis (RA), but the role of pesticides is not known. Objectives: We examined associations between RA and pesticides or other agricultural exposures among female spouses of licensed pesticide applicators in the Agricultural Health Study. Methods: Women were enrolled between 1993 and 1997 and followed through 2010. Cases (n = 275 total, 132 incident), confirmed by a physician or by self-reported use of disease modifying antirheumatic drugs, were compared with noncases (n = 24,018). Odds ratios (OR) and 95% confidence intervals (CI) were estimated using logistic regression models adjusted for age, state, and smoking pack-years. Results: Overall, women with RA were somewhat more likely to have reported lifetime use of any specific pesticide versus no pesticides (OR = 1.4; 95% CI: 1.0, 1.6). Of the 15 pesticides examined, maneb/mancozeb (OR = 3.3; 95% CI: 1.5, 7.1) and glyphosate (OR = 1.4; 95% CI: 1.0, 2.1) were associated with incident RA compared with no pesticide use. An elevated, but non-statistically significant association with incident RA was seen for DDT (OR = 1.9; 95% CI: 0.97, 3.6). Incident RA was also associated with the application of chemical fertilizers (OR = 1.7; 95% CI: 1.1, 2.7) and cleaning with solvents (OR = 1.6; 95% CI: 1.1, 2.4), but inversely associated with lifetime livestock exposure as a child and adult (OR = 0.48; 95% CI: 0.24, 0.97) compared with no livestock exposure. Conclusions: Our results suggest that specific agricultural pesticides, solvents, and chemical fertilizers may increase the risk of RA in women, while exposures involving animal contact may be protective. Citation: Parks CG, Hoppin JA, De Roos AJ, Costenbader KH, Alavanja MC, Sandler DP. 2016. Rheumatoid arthritis in Agricultural Health Study spouses: associations with pesticides and other farm exposures. Environ Health Perspect 124:1728–1734; http://dx.doi.org/10.1289/EHP129 PMID:27285288
Kojima, Seiji; Du, Dongning; Sato, Masayasu; Park, Enoch Y
2004-01-01
Fatty acid methyl ester (FAME) production from waste activated bleaching earth (ABE) discarded by the crude oil refining industry was investigated using fossil fuel as a solvent in the esterification of triglycerides. Lipase from Candida cylindracea showed the highest stability in diesel oil. Using diesel oil as a solvent, 3 h was sufficient to obtain a yield of approximately 100% of FAME in the presence of 10% lipase from waste ABE. Kerosene was also a good solvent in the esterification of triglycerides embedded in the waste ABE. Fuel analysis showed that the FAME produced using diesel oil as a solvent complied with the Japanese diesel standard and the 10% residual carbon amount was lower than that of FAME produced using other solvents. Use of diesel oil as solvent in the FAME production from the waste ABE simplified the process, because there was no need to separate the organic solvent from the FAME-solvent mixture. These results demonstrate a promising reutilization method for the production of FAME, for use as a biodiesel, from industrial waste resources containing waste vegetable oils.