Advantages and Disadvantages in Image Processing with Free Software in Radiology.

PubMed

Mujika, Katrin Muradas; Méndez, Juan Antonio Juanes; de Miguel, Andrés Framiñan

2018-01-15

Currently, there are sophisticated applications that make it possible to visualize medical images and even to manipulate them. These software applications are of great interest, both from a teaching and a radiological perspective. In addition, some of these applications are known as Free Open Source Software because they are free and the source code is freely available, and therefore it can be easily obtained even on personal computers. Two examples of free open source software are Osirix Lite® and 3D Slicer®. However, this last group of free applications have limitations in its use. For the radiological field, manipulating and post-processing images is increasingly important. Consequently, sophisticated computing tools that combine software and hardware to process medical images are needed. In radiology, graphic workstations allow their users to process, review, analyse, communicate and exchange multidimensional digital images acquired with different image-capturing radiological devices. These radiological devices are basically CT (Computerised Tomography), MRI (Magnetic Resonance Imaging), PET (Positron Emission Tomography), etc. Nevertheless, the programs included in these workstations have a high cost which always depends on the software provider and is always subject to its norms and requirements. With this study, we aim to present the advantages and disadvantages of these radiological image visualization systems in the advanced management of radiological studies. We will compare the features of the VITREA2® and AW VolumeShare 5® radiology workstation with free open source software applications like OsiriX® and 3D Slicer®, with examples from specific studies.

Cloud computing can simplify HIT infrastructure management.

PubMed

Glaser, John

2011-08-01

Software as a Service (SaaS), built on cloud computing technology, is emerging as the forerunner in IT infrastructure because it helps healthcare providers reduce capital investments. Cloud computing leads to predictable, monthly, fixed operating expenses for hospital IT staff. Outsourced cloud computing facilities are state-of-the-art data centers boasting some of the most sophisticated networking equipment on the market. The SaaS model helps hospitals safeguard against technology obsolescence, minimizes maintenance requirements, and simplifies management.

A qualitative analysis of bus simulator training on transit incidents : a case study in Florida. [Summary].

DOT National Transportation Integrated Search

2013-01-01

The simulator was once a very expensive, large-scale mechanical device for training military pilots or astronauts. Modern computers, linking sophisticated software and large-screen displays, have yielded simulators for the desktop or configured as sm...

Core Community Specifications for Electron Microprobe Operating Systems: Software, Quality Control, and Data Management Issues

NASA Technical Reports Server (NTRS)

Fournelle, John; Carpenter, Paul

2006-01-01

Modem electron microprobe systems have become increasingly sophisticated. These systems utilize either UNIX or PC computer systems for measurement, automation, and data reduction. These systems have undergone major improvements in processing, storage, display, and communications, due to increased capabilities of hardware and software. Instrument specifications are typically utilized at the time of purchase and concentrate on hardware performance. The microanalysis community includes analysts, researchers, software developers, and manufacturers, who could benefit from exchange of ideas and the ultimate development of core community specifications (CCS) for hardware and software components of microprobe instrumentation and operating systems.

A HyperCard Program for Business German.

ERIC Educational Resources Information Center

Paulsell, Patricia R.

Although the use of computer-assisted language instruction software has been mainly limited to grammatical/syntactical drills, the increasing number of language professionals with programming skills is leading to the development of more sophisticated language education programs. This report describes the generation of such a program using the…

Inventors in the Making

ERIC Educational Resources Information Center

Murray, Jenny; Bartelmay, Kathy

2005-01-01

Can second-grade students construct an understanding of sophisticated science processes and explore physics concepts while creating their own inventions? Yes! Students accomplished this and much more through a month-long project in which they used Legos and Robolab, the Lego computer programing software, to create their own inventions. One…

SMART-FDIR: Use of Artificial Intelligence in the Implementation of a Satellite FDIR

NASA Astrophysics Data System (ADS)

Guiotto, A.; Martelli, A.; Paccagnini, C.

Nowadays space activities are characterized by increased constraints in terms of on-board computing power and functional complexity combined with reduction of costs and schedule. This scenario necessarily originates impacts on the on-board software with particular emphases to the interfaces between on-board software and system/mission level requirements. The questions are: How can the effectiveness of Space System Software design be improved? How can we increase sophistication in the area of autonomy and failure tolerance, maintaining the necessary quality with acceptable risks?

The process group approach to reliable distributed computing

NASA Technical Reports Server (NTRS)

Birman, Kenneth P.

1992-01-01

The difficulty of developing reliable distribution software is an impediment to applying distributed computing technology in many settings. Experience with the ISIS system suggests that a structured approach based on virtually synchronous process groups yields systems that are substantially easier to develop, exploit sophisticated forms of cooperative computation, and achieve high reliability. Six years of research on ISIS, describing the model, its implementation challenges, and the types of applications to which ISIS has been applied are reviewed.

Analysis of an Anti-Phishing Lab Activity

ERIC Educational Resources Information Center

Werner, Laurie A.; Courte, Jill

2010-01-01

Despite advances in spam detection software, anti-spam laws, and increasingly sophisticated users, the number of successful phishing scams continues to grow. In addition to monetary losses attributable to phishing, there is also a loss of confidence that stifles use of online services. Using in-class activities in an introductory computer course…

A Performance Support Tool for Cisco Training Program Managers

ERIC Educational Resources Information Center

Benson, Angela D.; Bothra, Jashoda; Sharma, Priya

2004-01-01

Performance support systems can play an important role in corporations by managing and allowing distribution of information more easily. These systems run the gamut from simple paper job aids to sophisticated computer- and web-based software applications that support the entire corporate supply chain. According to Gery (1991), a performance…

Robotics for Computer Scientists: What's the Big Idea?

ERIC Educational Resources Information Center

Touretzky, David S.

2013-01-01

Modern robots, like today's smartphones, are complex devices with intricate software systems. Introductory robot programming courses must evolve to reflect this reality, by teaching students to make use of the sophisticated tools their robots provide rather than reimplementing basic algorithms. This paper focuses on teaching with Tekkotsu, an open…

Computer programs: Information retrieval and data analysis, a compilation

NASA Technical Reports Server (NTRS)

1972-01-01

The items presented in this compilation are divided into two sections. Section one treats of computer usage devoted to the retrieval of information that affords the user rapid entry into voluminous collections of data on a selective basis. Section two is a more generalized collection of computer options for the user who needs to take such data and reduce it to an analytical study within a specific discipline. These programs, routines, and subroutines should prove useful to users who do not have access to more sophisticated and expensive computer software.

GiveMe Shelter: A People-Centred Design Process for Promoting Independent Inquiry-Led Learning in Engineering

ERIC Educational Resources Information Center

Dyer, Mark; Grey, Thomas; Kinnane, Oliver

2017-01-01

It has become increasingly common for tasks traditionally carried out by engineers to be undertaken by technicians and technologist with access to sophisticated computers and software that can often perform complex calculations that were previously the responsibility of engineers. Not surprisingly, this development raises serious questions about…

The RCM: A Resource Management and Program Budgeting Approach for State and Local Educational Agencies.

ERIC Educational Resources Information Center

Chambers, Jay G.; Parrish, Thomas B.

The Resource Cost Model (RCM) is a resource management system that combines the technical advantages of sophisticated computer simulation software with the practical benefits of group decision making to provide detailed information about educational program costs. The first section of this document introduces the conceptual framework underlying…

Transmission loss optimization in acoustic sandwich panels

NASA Astrophysics Data System (ADS)

Makris, S. E.; Dym, C. L.; MacGregor Smith, J.

1986-06-01

Considering the sound transmission loss (TL) of a sandwich panel as the single objective, different optimization techniques are examined and a sophisticated computer program is used to find the optimum TL. Also, for one of the possible case studies such as core optimization, closed-form expressions are given between TL and the core-design variables for different sets of skins. The significance of these functional relationships lies in the fact that the panel designer can bypass the necessity of using a sophisticated software package in order to assess explicitly the dependence of the TL on core thickness and density.

Teaching computer interfacing with virtual instruments in an object-oriented language.

PubMed Central

Gulotta, M

1995-01-01

LabVIEW is a graphic object-oriented computer language developed to facilitate hardware/software communication. LabVIEW is a complete computer language that can be used like Basic, FORTRAN, or C. In LabVIEW one creates virtual instruments that aesthetically look like real instruments but are controlled by sophisticated computer programs. There are several levels of data acquisition VIs that make it easy to control data flow, and many signal processing and analysis algorithms come with the software as premade VIs. In the classroom, the similarity between virtual and real instruments helps students understand how information is passed between the computer and attached instruments. The software may be used in the absence of hardware so that students can work at home as well as in the classroom. This article demonstrates how LabVIEW can be used to control data flow between computers and instruments, points out important features for signal processing and analysis, and shows how virtual instruments may be used in place of physical instrumentation. Applications of LabVIEW to the teaching laboratory are also discussed, and a plausible course outline is given. PMID:8580361

Teaching computer interfacing with virtual instruments in an object-oriented language.

PubMed

Gulotta, M

1995-11-01

LabVIEW is a graphic object-oriented computer language developed to facilitate hardware/software communication. LabVIEW is a complete computer language that can be used like Basic, FORTRAN, or C. In LabVIEW one creates virtual instruments that aesthetically look like real instruments but are controlled by sophisticated computer programs. There are several levels of data acquisition VIs that make it easy to control data flow, and many signal processing and analysis algorithms come with the software as premade VIs. In the classroom, the similarity between virtual and real instruments helps students understand how information is passed between the computer and attached instruments. The software may be used in the absence of hardware so that students can work at home as well as in the classroom. This article demonstrates how LabVIEW can be used to control data flow between computers and instruments, points out important features for signal processing and analysis, and shows how virtual instruments may be used in place of physical instrumentation. Applications of LabVIEW to the teaching laboratory are also discussed, and a plausible course outline is given.

Science of Security Lablet - Scalability and Usability

DTIC Science & Technology

2014-12-16

mobile computing [19]. However, the high-level infrastructure design and our own implementation (both described throughout this paper) can easily...critical and infrastructural systems demands high levels of sophistication in the technical aspects of cybersecurity, software and hardware design...Forget, S. Komanduri, Alessandro Acquisti, Nicolas Christin, Lorrie Cranor, Rahul Telang. "Security Behavior Observatory: Infrastructure for Long-term

Web-based software tool for constraint-based design specification of synthetic biological systems.

PubMed

Oberortner, Ernst; Densmore, Douglas

2015-06-19

miniEugene provides computational support for solving combinatorial design problems, enabling users to specify and enumerate designs for novel biological systems based on sets of biological constraints. This technical note presents a brief tutorial for biologists and software engineers in the field of synthetic biology on how to use miniEugene. After reading this technical note, users should know which biological constraints are available in miniEugene, understand the syntax and semantics of these constraints, and be able to follow a step-by-step guide to specify the design of a classical synthetic biological system-the genetic toggle switch.1 We also provide links and references to more information on the miniEugene web application and the integration of the miniEugene software library into sophisticated Computer-Aided Design (CAD) tools for synthetic biology ( www.eugenecad.org ).

Revisiting Mathematical Problem Solving and Posing in the Digital Era: Toward Pedagogically Sound Uses of Modern Technology

ERIC Educational Resources Information Center

Abramovich, S.

2014-01-01

The availability of sophisticated computer programs such as "Wolfram Alpha" has made many problems found in the secondary mathematics curriculum somewhat obsolete for they can be easily solved by the software. Against this background, an interplay between the power of a modern tool of technology and educational constraints it presents is…

Toward A Simulation-Based Tool for the Treatment of Vocal Fold Paralysis

PubMed Central

Mittal, Rajat; Zheng, Xudong; Bhardwaj, Rajneesh; Seo, Jung Hee; Xue, Qian; Bielamowicz, Steven

2011-01-01

Advances in high-performance computing are enabling a new generation of software tools that employ computational modeling for surgical planning. Surgical management of laryngeal paralysis is one area where such computational tools could have a significant impact. The current paper describes a comprehensive effort to develop a software tool for planning medialization laryngoplasty where a prosthetic implant is inserted into the larynx in order to medialize the paralyzed vocal fold (VF). While this is one of the most common procedures used to restore voice in patients with VF paralysis, it has a relatively high revision rate, and the tool being developed is expected to improve surgical outcomes. This software tool models the biomechanics of airflow-induced vibration in the human larynx and incorporates sophisticated approaches for modeling the turbulent laryngeal flow, the complex dynamics of the VFs, as well as the production of voiced sound. The current paper describes the key elements of the modeling approach, presents computational results that demonstrate the utility of the approach and also describes some of the limitations and challenges. PMID:21556320

M.S.L.A.P. Modular Spectral Line Analysis Program documentation

NASA Technical Reports Server (NTRS)

Joseph, Charles L.; Jenkins, Edward B.

1991-01-01

MSLAP is a software for analyzing spectra, providing the basic structure to identify spectral features, to make quantitative measurements of this features, and to store the measurements for convenient access. MSLAP can be used to measure not only the zeroth moment (equivalent width) of a profile, but also the first and second moments. Optical depths and the corresponding column densities across the profile can be measured as well for sufficiently high resolution data. The software was developed for an interactive, graphical analysis where the computer carries most of the computational and data organizational burden and the investigator is responsible only for all judgement decisions. It employs sophisticated statistical techniques for determining the best polynomial fit to the continuum and for calculating the uncertainties.

Software systems for modeling articulated figures

NASA Technical Reports Server (NTRS)

Phillips, Cary B.

1989-01-01

Research in computer animation and simulation of human task performance requires sophisticated geometric modeling and user interface tools. The software for a research environment should present the programmer with a powerful but flexible substrate of facilities for displaying and manipulating geometric objects, yet insure that future tools have a consistent and friendly user interface. Jack is a system which provides a flexible and extensible programmer and user interface for displaying and manipulating complex geometric figures, particularly human figures in a 3D working environment. It is a basic software framework for high-performance Silicon Graphics IRIS workstations for modeling and manipulating geometric objects in a general but powerful way. It provides a consistent and user-friendly interface across various applications in computer animation and simulation of human task performance. Currently, Jack provides input and control for applications including lighting specification and image rendering, anthropometric modeling, figure positioning, inverse kinematics, dynamic simulation, and keyframe animation.

Co-design of software and hardware to implement remote sensing algorithms

NASA Astrophysics Data System (ADS)

Theiler, James P.; Frigo, Janette R.; Gokhale, Maya; Szymanski, John J.

2002-01-01

Both for offline searches through large data archives and for onboard computation at the sensor head, there is a growing need for ever-more rapid processing of remote sensing data. For many algorithms of use in remote sensing, the bulk of the processing takes place in an ``inner loop'' with a large number of simple operations. For these algorithms, dramatic speedups can often be obtained with specialized hardware. The difficulty and expense of digital design continues to limit applicability of this approach, but the development of new design tools is making this approach more feasible, and some notable successes have been reported. On the other hand, it is often the case that processing can also be accelerated by adopting a more sophisticated algorithm design. Unfortunately, a more sophisticated algorithm is much harder to implement in hardware, so these approaches are often at odds with each other. With careful planning, however, it is sometimes possible to combine software and hardware design in such a way that each complements the other, and the final implementation achieves speedup that would not have been possible with a hardware-only or a software-only solution. We will in particular discuss the co-design of software and hardware to achieve substantial speedup of algorithms for multispectral image segmentation and for endmember identification.

Viewing CAD Drawings on the Internet

ERIC Educational Resources Information Center

Schwendau, Mark

2004-01-01

Computer aided design (CAD) has been producing 3-D models for years. AutoCAD software is frequently used to create sophisticated 3-D models. These CAD files can be exported as 3DS files for import into Autodesk's 3-D Studio Viz. In this program, the user can render and modify the 3-D model before exporting it out as a WRL (world file hyperlinked)…

Computers in medicine: liability issues for physicians.

PubMed

Hafner, A W; Filipowicz, A B; Whitely, W P

1989-07-01

Physicians routinely use computers to store, access, and retrieve medical information. As computer use becomes even more widespread in medicine, failure to utilize information systems may be seen as a violation of professional custom and lead to findings of professional liability. Even when a technology is not widespread, failure to incorporate it into medical practice may give rise to liability if the technology is accessible to the physician and reduces risk to the patient. Improvement in the availability of medical information sources imposes a greater burden on the physician to keep current and to obtain informed consent from patients. To routinely perform computer-assisted literature searches for informed consent and diagnosis is 'good medicine'. Clinical and diagnostic applications of computer technology now include computer-assisted decision making with the aid of sophisticated databases. Although such systems will expand the knowledge base and competence of physicians, malfunctioning software raises a major liability question. Also, complex computer-driven technology is used in direct patient care. Defective or improperly used hardware or software can lead to patient injury, thus raising additional complicated questions of professional liability and product liability.

IPAD: Integrated Programs for Aerospace-vehicle Design

NASA Technical Reports Server (NTRS)

Miller, R. E., Jr.

1985-01-01

Early work was performed to apply data base technology in support of the management of engineering data in the design and manufacturing environments. The principal objective of the IPAD project is to develop a computer software system for use in the design of aerospace vehicles. Two prototype systems are created for this purpose. Relational Information Manager (RIM) is a successful commercial product. The IPAD Information Processor (IPIP), a much more sophisticated system, is still under development.

An integrated decision support system for TRAC: A proposal

NASA Technical Reports Server (NTRS)

Mukkamala, Ravi

1991-01-01

Optimal allocation and usage of resources is a key to effective management. Resources of concern to TRAC are: Manpower (PSY), Money (Travel, contracts), Computing, Data, Models, etc. Management activities of TRAC include: Planning, Programming, Tasking, Monitoring, Updating, and Coordinating. Existing systems are insufficient, not completely automated, manpower intensive, and has the potential for data inconsistency exists. A system is proposed which suggests a means to integrate all project management activities of TRAC through the development of a sophisticated software and by utilizing the existing computing systems and network resources. The systems integration proposal is examined in detail.

CANFAR + Skytree: Mining Massive Datasets as an Essential Part of the Future of Astronomy

NASA Astrophysics Data System (ADS)

Ball, Nicholas M.

2013-01-01

The future study of large astronomical datasets, consisting of hundreds of millions to billions of objects, will be dominated by large computing resources, and by analysis tools of the necessary scalability and sophistication to extract useful information. Significant effort will be required to fulfil their potential as a provider of the next generation of science results. To-date, computing systems have allowed either sophisticated analysis of small datasets, e.g., most astronomy software, or simple analysis of large datasets, e.g., database queries. At the Canadian Astronomy Data Centre, we have combined our cloud computing system, the Canadian Advanced Network for Astronomical Research (CANFAR), with the world's most advanced machine learning software, Skytree, to create the world's first cloud computing system for data mining in astronomy. This allows the full sophistication of the huge fields of data mining and machine learning to be applied to the hundreds of millions of objects that make up current large datasets. CANFAR works by utilizing virtual machines, which appear to the user as equivalent to a desktop. Each machine is replicated as desired to perform large-scale parallel processing. Such an arrangement carries far more flexibility than other cloud systems, because it enables the user to immediately install and run the same code that they already utilize for science on their desktop. We demonstrate the utility of the CANFAR + Skytree system by showing science results obtained, including assigning photometric redshifts with full probability density functions (PDFs) to a catalog of approximately 133 million galaxies from the MegaPipe reductions of the Canada-France-Hawaii Telescope Legacy Wide and Deep surveys. Each PDF is produced nonparametrically from 100 instances of the photometric parameters for each galaxy, generated by perturbing within the errors on the measurements. Hence, we produce, store, and assign redshifts to, a catalog of over 13 billion object instances. This catalog is comparable in size to those expected from next-generation surveys, such as Large Synoptic Survey Telescope. The CANFAR+Skytree system is open for use by any interested member of the astronomical community.

Grids: The Top Ten Questions

DOE PAGES

Schopf, Jennifer M.; Nitzberg, Bill

2002-01-01

The design and implementation of a national computing system and data grid has become a reachable goal from both the computer science and computational science point of view. A distributed infrastructure capable of sophisticated computational functions can bring many benefits to scientific work, but poses many challenges, both technical and socio-political. Technical challenges include having basic software tools, higher-level services, functioning and pervasive security, and standards, while socio-political issues include building a user community, adding incentives for sites to be part of a user-centric environment, and educating funding sources about the needs of this community. This paper details the areasmore » relating to Grid research that we feel still need to be addressed to fully leverage the advantages of the Grid.« less

Specificity of software cooperating with an optoelectronic sensor in the pulse oximeter system

NASA Astrophysics Data System (ADS)

Cysewska-Sobusiak, Anna; Wiczynski, Grzegorz; Jedwabny, Tomasz

1995-06-01

Specificity of a software package composed of two parts which control an optoelectronic sensor of the computer-aided system made to realize the noninvasive measurements of the arterial blood oxygen saturation as well as some parameters of the peripheral pulse waveform, has been described. Principles of the transmission variant of the one and only noninvasive measurement method, so-called pulse oximetry, has been utilized. The software co-ordinates the suitable cooperation of an IBM PC compatible microcomputer with the sensor and one specialized card. This novel card is a key part of the whole measuring system which some application fields are extended in comparison to pulse oximeters commonly attainable. The user-friendly MS Windows graphical environment which creates the system to be multitask and non-preemptive, has been used to design the specific part of the programming presented here. With this environment, sophisticated tasks of the software package can be performed without excessive complication.

Educational Video Recording and Editing for The Hand Surgeon

PubMed Central

Rehim, Shady A.; Chung, Kevin C.

2016-01-01

Digital video recordings are increasingly used across various medical and surgical disciplines including hand surgery for documentation of patient care, resident education, scientific presentations and publications. In recent years, the introduction of sophisticated computer hardware and software technology has simplified the process of digital video production and improved means of disseminating large digital data files. However, the creation of high quality surgical video footage requires basic understanding of key technical considerations, together with creativity and sound aesthetic judgment of the videographer. In this article we outline the practical steps involved with equipment preparation, video recording, editing and archiving as well as guidance for the choice of suitable hardware and software equipment. PMID:25911212

Simulation and animation of sensor-driven robots.

PubMed

Chen, C; Trivedi, M M; Bidlack, C R

1994-10-01

Most simulation and animation systems utilized in robotics are concerned with simulation of the robot and its environment without simulation of sensors. These systems have difficulty in handling robots that utilize sensory feedback in their operation. In this paper, a new design of an environment for simulation, animation, and visualization of sensor-driven robots is presented. As sensor technology advances, increasing numbers of robots are equipped with various types of sophisticated sensors. The main goal of creating the visualization environment is to aid the automatic robot programming and off-line programming capabilities of sensor-driven robots. The software system will help the users visualize the motion and reaction of the sensor-driven robot under their control program. Therefore, the efficiency of the software development is increased, the reliability of the software and the operation safety of the robot are ensured, and the cost of new software development is reduced. Conventional computer-graphics-based robot simulation and animation software packages lack of capabilities for robot sensing simulation. This paper describes a system designed to overcome this deficiency.

Control systems for heating, ventilating, and air conditioning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haines, R.W.

1977-01-01

Hundreds of ideas for designing and controlling sophisticated heating, ventilating and air conditioning (HVAC) systems are presented. Information is included on enthalpy control, energy conservation in HVAC systems, on solar heating, cooling and refrigeration systems, and on a self-draining water collector and heater. Computerized control systems and the economics of supervisory systems are discussed. Information is presented on computer system components, software, relevant terminology, and computerized security and fire reporting systems. Benefits of computer systems are explained, along with optimization techniques, data management, maintenance schedules, and energy consumption. A bibliography, glossaries of HVAC terminology, abbreviations, symbols, and a subject indexmore » are provided. (LCL)« less

Facial Animations: Future Research Directions & Challenges

NASA Astrophysics Data System (ADS)

Alkawaz, Mohammed Hazim; Mohamad, Dzulkifli; Rehman, Amjad; Basori, Ahmad Hoirul

2014-06-01

Nowadays, computer facial animation is used in a significant multitude fields that brought human and social to study the computer games, films and interactive multimedia reality growth. Authoring the computer facial animation, complex and subtle expressions are challenging and fraught with problems. As a result, the current most authored using universal computer animation techniques often limit the production quality and quantity of facial animation. With the supplement of computer power, facial appreciative, software sophistication and new face-centric methods emerging are immature in nature. Therefore, this paper concentrates to define and managerially categorize current and emerged surveyed facial animation experts to define the recent state of the field, observed bottlenecks and developing techniques. This paper further presents a real-time simulation model of human worry and howling with detail discussion about their astonish, sorrow, annoyance and panic perception.

DOE's Computer Incident Advisory Capability (CIAC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schultz, E.

1990-09-01

Computer security is essential in maintaining quality in the computing environment. Computer security incidents, however, are becoming more sophisticated. The DOE Computer Incident Advisory Capability (CIAC) team was formed primarily to assist DOE sites in responding to computer security incidents. Among CIAC's other responsibilities are gathering and distributing information to DOE sites, providing training workshops, coordinating with other agencies, response teams, and vendors, creating guidelines for incident handling, and developing software tools. CIAC has already provided considerable assistance to DOE sites faced with virus infections and worm and hacker attacks, has issued over 40 information bulletins, and has developed andmore » presented a workshop on incident handling. CIAC's experience in helping sites has produced several lessons learned, including the need to follow effective procedures to avoid virus infections in small systems and the need for sound password management and system administration in networked systems. CIAC's activity and scope will expand in the future. 4 refs.« less

URDME: a modular framework for stochastic simulation of reaction-transport processes in complex geometries.

PubMed

Drawert, Brian; Engblom, Stefan; Hellander, Andreas

2012-06-22

Experiments in silico using stochastic reaction-diffusion models have emerged as an important tool in molecular systems biology. Designing computational software for such applications poses several challenges. Firstly, realistic lattice-based modeling for biological applications requires a consistent way of handling complex geometries, including curved inner- and outer boundaries. Secondly, spatiotemporal stochastic simulations are computationally expensive due to the fast time scales of individual reaction- and diffusion events when compared to the biological phenomena of actual interest. We therefore argue that simulation software needs to be both computationally efficient, employing sophisticated algorithms, yet in the same time flexible in order to meet present and future needs of increasingly complex biological modeling. We have developed URDME, a flexible software framework for general stochastic reaction-transport modeling and simulation. URDME uses Unstructured triangular and tetrahedral meshes to resolve general geometries, and relies on the Reaction-Diffusion Master Equation formalism to model the processes under study. An interface to a mature geometry and mesh handling external software (Comsol Multiphysics) provides for a stable and interactive environment for model construction. The core simulation routines are logically separated from the model building interface and written in a low-level language for computational efficiency. The connection to the geometry handling software is realized via a Matlab interface which facilitates script computing, data management, and post-processing. For practitioners, the software therefore behaves much as an interactive Matlab toolbox. At the same time, it is possible to modify and extend URDME with newly developed simulation routines. Since the overall design effectively hides the complexity of managing the geometry and meshes, this means that newly developed methods may be tested in a realistic setting already at an early stage of development. In this paper we demonstrate, in a series of examples with high relevance to the molecular systems biology community, that the proposed software framework is a useful tool for both practitioners and developers of spatial stochastic simulation algorithms. Through the combined efforts of algorithm development and improved modeling accuracy, increasingly complex biological models become feasible to study through computational methods. URDME is freely available at http://www.urdme.org.

3-d finite element model development for biomechanics: a software demonstration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollerbach, K.; Hollister, A.M.; Ashby, E.

1997-03-01

Finite element analysis is becoming an increasingly important part of biomechanics and orthopedic research, as computational resources become more powerful, and data handling algorithms become more sophisticated. Until recently, tools with sufficient power did not exist or were not accessible to adequately model complicated, three-dimensional, nonlinear biomechanical systems. In the past, finite element analyses in biomechanics have often been limited to two-dimensional approaches, linear analyses, or simulations of single tissue types. Today, we have the resources to model fully three-dimensional, nonlinear, multi-tissue, and even multi-joint systems. The authors will present the process of developing these kinds of finite element models,more » using human hand and knee examples, and will demonstrate their software tools.« less

Parallel computer processing and modeling: applications for the ICU

NASA Astrophysics Data System (ADS)

Baxter, Grant; Pranger, L. Alex; Draghic, Nicole; Sims, Nathaniel M.; Wiesmann, William P.

2003-07-01

Current patient monitoring procedures in hospital intensive care units (ICUs) generate vast quantities of medical data, much of which is considered extemporaneous and not evaluated. Although sophisticated monitors to analyze individual types of patient data are routinely used in the hospital setting, this equipment lacks high order signal analysis tools for detecting long-term trends and correlations between different signals within a patient data set. Without the ability to continuously analyze disjoint sets of patient data, it is difficult to detect slow-forming complications. As a result, the early onset of conditions such as pneumonia or sepsis may not be apparent until the advanced stages. We report here on the development of a distributed software architecture test bed and software medical models to analyze both asynchronous and continuous patient data in real time. Hardware and software has been developed to support a multi-node distributed computer cluster capable of amassing data from multiple patient monitors and projecting near and long-term outcomes based upon the application of physiologic models to the incoming patient data stream. One computer acts as a central coordinating node; additional computers accommodate processing needs. A simple, non-clinical model for sepsis detection was implemented on the system for demonstration purposes. This work shows exceptional promise as a highly effective means to rapidly predict and thereby mitigate the effect of nosocomial infections.

New generation of exploration tools: interactive modeling software and microcomputers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krajewski, S.A.

1986-08-01

Software packages offering interactive modeling techniques are now available for use on microcomputer hardware systems. These packages are reasonably priced for both company and independent explorationists; they do not require users to have high levels of computer literacy; they are capable of rapidly completing complex ranges of sophisticated geologic and geophysical modeling tasks; and they can produce presentation-quality output for comparison with real-world data. For example, interactive packages are available for mapping, log analysis, seismic modeling, reservoir studies, and financial projects as well as for applying a variety of statistical and geostatistical techniques to analysis of exploration data. More importantly,more » these packages enable explorationists to directly apply their geologic expertise when developing and fine-tuning models for identifying new prospects and for extending producing fields. As a result of these features, microcomputers and interactive modeling software are becoming common tools in many exploration offices. Gravity and magnetics software programs illustrate some of the capabilities of such exploration tools.« less

Pharmacophore modeling, docking, and principal component analysis based clustering: combined computer-assisted approaches to identify new inhibitors of the human rhinovirus coat protein.

PubMed

Steindl, Theodora M; Crump, Carolyn E; Hayden, Frederick G; Langer, Thierry

2005-10-06

The development and application of a sophisticated virtual screening and selection protocol to identify potential, novel inhibitors of the human rhinovirus coat protein employing various computer-assisted strategies are described. A large commercially available database of compounds was screened using a highly selective, structure-based pharmacophore model generated with the program Catalyst. A docking study and a principal component analysis were carried out within the software package Cerius and served to validate and further refine the obtained results. These combined efforts led to the selection of six candidate structures, for which in vitro anti-rhinoviral activity could be shown in a biological assay.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gavignet, A.A.; Wick, C.J.

In current practice, pressure drops in the mud circulating system and the settling velocity of cuttings are calculated with simple rheological models and simple equations. Wellsite computers now allow more sophistication in drilling computations. In this paper, experimental results on the settling velocity of spheres in drilling fluids are reported, along with rheograms done over a wide range of shear rates. The flow curves are fitted to polynomials and general methods are developed to predict friction losses and settling velocities as functions of the polynomial coefficients. These methods were incorporated in a software package that can handle any rig configurationmore » system, including riser booster. Graphic displays show the effect of each parameter on the performance of the circulating system.« less

GEOS. User Tutorials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fu, Pengchen; Settgast, Randolph R.; Johnson, Scott M.

2014-12-17

GEOS is a massively parallel, multi-physics simulation application utilizing high performance computing (HPC) to address subsurface reservoir stimulation activities with the goal of optimizing current operations and evaluating innovative stimulation methods. GEOS enables coupling of di erent solvers associated with the various physical processes occurring during reservoir stimulation in unique and sophisticated ways, adapted to various geologic settings, materials and stimulation methods. Developed at the Lawrence Livermore National Laboratory (LLNL) as a part of a Laboratory-Directed Research and Development (LDRD) Strategic Initiative (SI) project, GEOS represents the culmination of a multi-year ongoing code development and improvement e ort that hasmore » leveraged existing code capabilities and sta expertise to design new computational geosciences software.« less

Applying Computerized-Scoring Models of Written Biological Explanations across Courses and Colleges: Prospects and Limitations

PubMed Central

Ha, Minsu; Nehm, Ross H.; Urban-Lurain, Mark; Merrill, John E.

2011-01-01

Our study explored the prospects and limitations of using machine-learning software to score introductory biology students’ written explanations of evolutionary change. We investigated three research questions: 1) Do scoring models built using student responses at one university function effectively at another university? 2) How many human-scored student responses are needed to build scoring models suitable for cross-institutional application? 3) What factors limit computer-scoring efficacy, and how can these factors be mitigated? To answer these questions, two biology experts scored a corpus of 2556 short-answer explanations (from biology majors and nonmajors) at two universities for the presence or absence of five key concepts of evolution. Human- and computer-generated scores were compared using kappa agreement statistics. We found that machine-learning software was capable in most cases of accurately evaluating the degree of scientific sophistication in undergraduate majors’ and nonmajors’ written explanations of evolutionary change. In cases in which the software did not perform at the benchmark of “near-perfect” agreement (kappa > 0.80), we located the causes of poor performance and identified a series of strategies for their mitigation. Machine-learning software holds promise as an assessment tool for use in undergraduate biology education, but like most assessment tools, it is also characterized by limitations. PMID:22135372

Applying computerized-scoring models of written biological explanations across courses and colleges: prospects and limitations.

PubMed

Ha, Minsu; Nehm, Ross H; Urban-Lurain, Mark; Merrill, John E

2011-01-01

Our study explored the prospects and limitations of using machine-learning software to score introductory biology students' written explanations of evolutionary change. We investigated three research questions: 1) Do scoring models built using student responses at one university function effectively at another university? 2) How many human-scored student responses are needed to build scoring models suitable for cross-institutional application? 3) What factors limit computer-scoring efficacy, and how can these factors be mitigated? To answer these questions, two biology experts scored a corpus of 2556 short-answer explanations (from biology majors and nonmajors) at two universities for the presence or absence of five key concepts of evolution. Human- and computer-generated scores were compared using kappa agreement statistics. We found that machine-learning software was capable in most cases of accurately evaluating the degree of scientific sophistication in undergraduate majors' and nonmajors' written explanations of evolutionary change. In cases in which the software did not perform at the benchmark of "near-perfect" agreement (kappa > 0.80), we located the causes of poor performance and identified a series of strategies for their mitigation. Machine-learning software holds promise as an assessment tool for use in undergraduate biology education, but like most assessment tools, it is also characterized by limitations.

Tools for Analyzing Computing Resource Management Strategies and Algorithms for SDR Clouds

NASA Astrophysics Data System (ADS)

Marojevic, Vuk; Gomez-Miguelez, Ismael; Gelonch, Antoni

2012-09-01

Software defined radio (SDR) clouds centralize the computing resources of base stations. The computing resource pool is shared between radio operators and dynamically loads and unloads digital signal processing chains for providing wireless communications services on demand. Each new user session request particularly requires the allocation of computing resources for executing the corresponding SDR transceivers. The huge amount of computing resources of SDR cloud data centers and the numerous session requests at certain hours of a day require an efficient computing resource management. We propose a hierarchical approach, where the data center is divided in clusters that are managed in a distributed way. This paper presents a set of computing resource management tools for analyzing computing resource management strategies and algorithms for SDR clouds. We use the tools for evaluating a different strategies and algorithms. The results show that more sophisticated algorithms can achieve higher resource occupations and that a tradeoff exists between cluster size and algorithm complexity.

Simulation and animation of sensor-driven robots

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, C.; Trivedi, M.M.; Bidlack, C.R.

1994-10-01

Most simulation and animation systems utilized in robotics are concerned with simulation of the robot and its environment without simulation of sensors. These systems have difficulty in handling robots that utilize sensory feedback in their operation. In this paper, a new design of an environment for simulation, animation, and visualization of sensor-driven robots is presented. As sensor technology advances, increasing numbers of robots are equipped with various types of sophisticated sensors. The main goal of creating the visualization environment is to aide the automatic robot programming and off-line programming capabilities of sensor-driven robots. The software system will help the usersmore » visualize the motion and reaction of the sensor-driven robot under their control program. Therefore, the efficiency of the software development is increased, the reliability of the software and the operation safety of the robot are ensured, and the cost of new software development is reduced. Conventional computer-graphics-based robot simulation and animation software packages lack of capabilities for robot sensing simulation. This paper describes a system designed to overcome this deficiency.« less

Desktop system for accounting, audit, and research in A&E.

PubMed Central

Taylor, C J; Brain, S G; Bull, F; Crosby, A C; Ferguson, D G

1997-01-01

The development of a database for audit, research, and accounting in accident and emergency (A&E) is described. The system uses a desktop computer, an optical scanner, sophisticated optical mark reader software, and workload management data. The system is highly flexible, easy to use, and at a cost of around 16,000 pounds affordable for larger departments wishing to move towards accounting. For smaller departments, it may be an alternative to full computerisation. Images Figure 1 Figure 2 Figure 3 Figure 5 Figure 6 PMID:9132200

Open source hardware and software platform for robotics and artificial intelligence applications

NASA Astrophysics Data System (ADS)

Liang, S. Ng; Tan, K. O.; Lai Clement, T. H.; Ng, S. K.; Mohammed, A. H. Ali; Mailah, Musa; Azhar Yussof, Wan; Hamedon, Zamzuri; Yussof, Zulkifli

2016-02-01

Recent developments in open source hardware and software platforms (Android, Arduino, Linux, OpenCV etc.) have enabled rapid development of previously expensive and sophisticated system within a lower budget and flatter learning curves for developers. Using these platform, we designed and developed a Java-based 3D robotic simulation system, with graph database, which is integrated in online and offline modes with an Android-Arduino based rubbish picking remote control car. The combination of the open source hardware and software system created a flexible and expandable platform for further developments in the future, both in the software and hardware areas, in particular in combination with graph database for artificial intelligence, as well as more sophisticated hardware, such as legged or humanoid robots.

Aircraft integrated design and analysis: A classroom experience

NASA Technical Reports Server (NTRS)

Weisshaar, Terrence A.

1989-01-01

AAE 451 is the capstone course required of all senior undergraduates in the School of Aeronautics and Astronautics at Purdue University. During the past year the first steps of a long evolutionary process were taken to change the content and expectations of this course. These changes are the result of the availability of advanced computational capabilities and sophisticated electronic media availability at Purdue. This presentation will describe both the long range objectives and this year's experience using the High Speed Commercial Transport design, the AIAA Long Duration Aircraft design and RPV design proposal as project objectives. The central goal of these efforts is to provide a user-friendly, computer-software-based environment to supplement traditional design course methodology. The Purdue University Computer Center (PUCC), the Engineering Computer Network (ECN) and stand-alone PC's are being used for this development. This year's accomplishments center primarily on aerodynamics software obtained from NASA/Langley and its integration into the classroom. Word processor capability for oral and written work and computer graphics were also blended into the course. A total of ten HSCT designs were generated, ranging from twin-fuselage aircraft, forward swept wing aircraft to the more traditional delta and double-delta wing aircraft. Four Long Duration Aircraft designs were submitted, together with one RPV design tailored for photographic surveillance.

Generative Representations for Computer-Automated Evolutionary Design

NASA Technical Reports Server (NTRS)

Hornby, Gregory S.

2006-01-01

With the increasing computational power of computers, software design systems are progressing from being tools for architects and designers to express their ideas to tools capable of creating designs under human guidance. One of the main limitations for these computer-automated design systems is the representation with which they encode designs. If the representation cannot encode a certain design, then the design system cannot produce it. To be able to produce new types of designs, and not just optimize pre-defined parameterizations, evolutionary design systems must use generative representations. Generative representations are assembly procedures, or algorithms, for constructing a design thereby allowing for truly novel design solutions to be encoded. In addition, by enabling modularity, regularity and hierarchy, the level of sophistication that can be evolved is increased. We demonstrate the advantages of generative representations on two different design domains: the evolution of spacecraft antennas and the evolution of 3D objects.

Earth Science Informatics Comes of Age

NASA Technical Reports Server (NTRS)

Jodha, Siri; Khalsa, S.; Ramachandran, Rahul

2014-01-01

The volume and complexity of Earth science data have steadily increased, placing ever-greater demands on researchers, software developers and data managers tasked with handling such data. Additional demands arise from requirements being levied by funding agencies and governments to better manage, preserve and provide open access to data. Fortunately, over the past 10-15 years significant advances in information technology, such as increased processing power, advanced programming languages, more sophisticated and practical standards, and near-ubiquitous internet access have made the jobs of those acquiring, processing, distributing and archiving data easier. These advances have also led to an increasing number of individuals entering the field of informatics as it applies to Geoscience and Remote Sensing. Informatics is the science and technology of applying computers and computational methods to the systematic analysis, management, interchange, and representation of data, information, and knowledge. Informatics also encompasses the use of computers and computational methods to support decisionmaking and other applications for societal benefits.

Leaf-GP: an open and automated software application for measuring growth phenotypes for arabidopsis and wheat.

PubMed

Zhou, Ji; Applegate, Christopher; Alonso, Albor Dobon; Reynolds, Daniel; Orford, Simon; Mackiewicz, Michal; Griffiths, Simon; Penfield, Steven; Pullen, Nick

2017-01-01

Plants demonstrate dynamic growth phenotypes that are determined by genetic and environmental factors. Phenotypic analysis of growth features over time is a key approach to understand how plants interact with environmental change as well as respond to different treatments. Although the importance of measuring dynamic growth traits is widely recognised, available open software tools are limited in terms of batch image processing, multiple traits analyses, software usability and cross-referencing results between experiments, making automated phenotypic analysis problematic. Here, we present Leaf-GP (Growth Phenotypes), an easy-to-use and open software application that can be executed on different computing platforms. To facilitate diverse scientific communities, we provide three software versions, including a graphic user interface (GUI) for personal computer (PC) users, a command-line interface for high-performance computer (HPC) users, and a well-commented interactive Jupyter Notebook (also known as the iPython Notebook) for computational biologists and computer scientists. The software is capable of extracting multiple growth traits automatically from large image datasets. We have utilised it in Arabidopsis thaliana and wheat ( Triticum aestivum ) growth studies at the Norwich Research Park (NRP, UK). By quantifying a number of growth phenotypes over time, we have identified diverse plant growth patterns between different genotypes under several experimental conditions. As Leaf-GP has been evaluated with noisy image series acquired by different imaging devices (e.g. smartphones and digital cameras) and still produced reliable biological outputs, we therefore believe that our automated analysis workflow and customised computer vision based feature extraction software implementation can facilitate a broader plant research community for their growth and development studies. Furthermore, because we implemented Leaf-GP based on open Python-based computer vision, image analysis and machine learning libraries, we believe that our software not only can contribute to biological research, but also demonstrates how to utilise existing open numeric and scientific libraries (e.g. Scikit-image, OpenCV, SciPy and Scikit-learn) to build sound plant phenomics analytic solutions, in a efficient and effective way. Leaf-GP is a sophisticated software application that provides three approaches to quantify growth phenotypes from large image series. We demonstrate its usefulness and high accuracy based on two biological applications: (1) the quantification of growth traits for Arabidopsis genotypes under two temperature conditions; and (2) measuring wheat growth in the glasshouse over time. The software is easy-to-use and cross-platform, which can be executed on Mac OS, Windows and HPC, with open Python-based scientific libraries preinstalled. Our work presents the advancement of how to integrate computer vision, image analysis, machine learning and software engineering in plant phenomics software implementation. To serve the plant research community, our modulated source code, detailed comments, executables (.exe for Windows; .app for Mac), and experimental results are freely available at https://github.com/Crop-Phenomics-Group/Leaf-GP/releases.

Contemporary issues in HIM. The application layer--III.

PubMed

Wear, L L; Pinkert, J R

1993-07-01

We have seen document preparation systems evolve from basic line editors through powerful, sophisticated desktop publishing programs. This component of the application layer is probably one of the most used, and most readily identifiable. Ask grade school children nowadays, and many will tell you that they have written a paper on a computer. Next month will be a "fun" tour through a number of other application programs we find useful. They will range from a simple notebook reminder to a sophisticated photograph processor. Application layer: Software targeted for the end user, focusing on a specific application area, and typically residing in the computer system as distinct components on top of the OS. Desktop publishing: A document preparation program that begins with the text features of a word processor, then adds the ability for a user to incorporate outputs from a variety of graphic programs, spreadsheets, and other applications. Line editor: A document preparation program that manipulates text in a file on the basis of numbered lines. Word processor: A document preparation program that can, among other things, reformat sections of documents, move and replace blocks of text, use multiple character fonts, automatically create a table of contents and index, create complex tables, and combine text and graphics.

Beyond the proteome: Mass Spectrometry Special Interest Group (MS-SIG) at ISMB/ECCB 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryu, Soyoung; Payne, Samuel H.; Schaab, Christoph

2014-07-02

Mass spectrometry special interest group (MS-SIG) aims to bring together experts from the global research community to discuss highlights and challenges in the field of mass spectrometry (MS)-based proteomics and computational biology. The rapid echnological developments in MS-based proteomics have enabled the generation of a large amount of meaningful information on hundreds to thousands of proteins simultaneously from a biological sample; however, the complexity of the MS data require sophisticated computational algorithms and software for data analysis and interpretation. This year’s MS-SIG meeting theme was ‘Beyond the Proteome’ with major focuses on improving protein identification/quantification and using proteomics data tomore » solve interesting problems in systems biology and clinical research.« less

Industry and Academic Consortium for Computer Based Subsurface Geology Laboratory

NASA Astrophysics Data System (ADS)

Brown, A. L.; Nunn, J. A.; Sears, S. O.

2008-12-01

Twenty two licenses for Petrel Software acquired through a grant from Schlumberger are being used to redesign the laboratory portion of Subsurface Geology at Louisiana State University. The course redesign is a cooperative effort between LSU's Geology and Geophysics and Petroleum Engineering Departments and Schlumberger's Technical Training Division. In spring 2008, two laboratory sections were taught with 22 students in each section. The class contained geology majors, petroleum engineering majors, and geology graduate students. Limited enrollments and 3 hour labs make it possible to incorporate hands-on visualization, animation, manipulation of data and images, and access to geological data available online. 24/7 access to the laboratory and step by step instructions for Petrel exercises strongly promoted peer instruction and individual learning. Goals of the course redesign include: enhancing visualization of earth materials; strengthening student's ability to acquire, manage, and interpret multifaceted geological information; fostering critical thinking, the scientific method; improving student communication skills; providing cross training between geologists and engineers and increasing the quantity, quality, and diversity of students pursuing Earth Science and Petroleum Engineering careers. IT resources available in the laboratory provide students with sophisticated visualization tools, allowing them to switch between 2-D and 3-D reconstructions more seamlessly, and enabling them to manipulate larger integrated data-sets, thus permitting more time for critical thinking and hypothesis testing. IT resources also enable faculty and students to simultaneously work with the software to visually interrogate a 3D data set and immediately test hypothesis formulated in class. Preliminary evaluation of class results indicate that students found MS-Windows based Petrel easy to learn. By the end of the semester, students were able to not only map horizons and faults using seismic and well data but also compute volumetrics. Exam results indicated that while students could complete sophisticated exercises using the software, their understanding of key concepts such as conservation of volume in a palinspastic reconstruction or association of structures with a particular stress regime was limited. Future classes will incorporate more paper and pencil exercises to illustrate basic concepts. The equipment, software, and exercises developed will be used in additional upper level undergraduate and graduate classes.

Cardiovascular imaging environment: will the future be cloud-based?

PubMed

Kawel-Boehm, Nadine; Bluemke, David A

2017-07-01

In cardiovascular CT and MR imaging large datasets have to be stored, post-processed, analyzed and distributed. Beside basic assessment of volume and function in cardiac magnetic resonance imaging e.g., more sophisticated quantitative analysis is requested requiring specific software. Several institutions cannot afford various types of software and provide expertise to perform sophisticated analysis. Areas covered: Various cloud services exist related to data storage and analysis specifically for cardiovascular CT and MR imaging. Instead of on-site data storage, cloud providers offer flexible storage services on a pay-per-use basis. To avoid purchase and maintenance of specialized software for cardiovascular image analysis, e.g. to assess myocardial iron overload, MR 4D flow and fractional flow reserve, evaluation can be performed with cloud based software by the consumer or complete analysis is performed by the cloud provider. However, challenges to widespread implementation of cloud services include regulatory issues regarding patient privacy and data security. Expert commentary: If patient privacy and data security is guaranteed cloud imaging is a valuable option to cope with storage of large image datasets and offer sophisticated cardiovascular image analysis for institutions of all sizes.

Free Software and Free Textbooks

ERIC Educational Resources Information Center

Takhteyev, Yuri

2012-01-01

Some of the world's best and most sophisticated software is distributed today under "free" or "open source" licenses, which allow the recipients of such software to use, modify, and share it without paying royalties or asking for permissions. If this works for software, could it also work for educational resources, such as books? The economics of…

A microkernel design for component-based parallel numerical software systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balay, S.

1999-01-13

What is the minimal software infrastructure and what type of conventions are needed to simplify development of sophisticated parallel numerical application codes using a variety of software components that are not necessarily available as source code? We propose an opaque object-based model where the objects are dynamically loadable from the file system or network. The microkernel required to manage such a system needs to include, at most: (1) a few basic services, namely--a mechanism for loading objects at run time via dynamic link libraries, and consistent schemes for error handling and memory management; and (2) selected methods that all objectsmore » share, to deal with object life (destruction, reference counting, relationships), and object observation (viewing, profiling, tracing). We are experimenting with these ideas in the context of extensible numerical software within the ALICE (Advanced Large-scale Integrated Computational Environment) project, where we are building the microkernel to manage the interoperability among various tools for large-scale scientific simulations. This paper presents some preliminary observations and conclusions from our work with microkernel design.« less

Nursing informatics: the trend of the future.

PubMed

Nagelkerk, J; Ritola, P M; Vandort, P J

1998-01-01

Nursing informatics is a combination of computer, information, and nursing sciences. This new and expanding field addresses the efficient and effective use of information for nurses. Preparing nurses for computerization is essential to confront an explosion of sophisticated computerized technology in the workplace. It is critical in a competitive health care market for preparing nurses to use the most cost-effective methods. A model is presented that identifies six essential factors for preparing nurses for computerization. Strong leadership, effective communication, organized training sessions, established time frames, planned change, and tailored software are the essential factors to consider for development of a successful educational program.

High resolution image processing on low-cost microcomputers

NASA Technical Reports Server (NTRS)

Miller, R. L.

1993-01-01

Recent advances in microcomputer technology have resulted in systems that rival the speed, storage, and display capabilities of traditionally larger machines. Low-cost microcomputers can provide a powerful environment for image processing. A new software program which offers sophisticated image display and analysis on IBM-based systems is presented. Designed specifically for a microcomputer, this program provides a wide-range of functions normally found only on dedicated graphics systems, and therefore can provide most students, universities and research groups with an affordable computer platform for processing digital images. The processing of AVHRR images within this environment is presented as an example.

An expert system for municipal solid waste management simulation analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsieh, M.C.; Chang, N.B.

1996-12-31

Optimization techniques were usually used to model the complicated metropolitan solid waste management system to search for the best dynamic combination of waste recycling, facility siting, and system operation, where sophisticated and well-defined interrelationship are required in the modeling process. But this paper applied the Concurrent Object-Oriented Simulation (COOS), a new simulation software construction method, to bridge the gap between the physical system and its computer representation. The case study of Kaohsiung solid waste management system in Taiwan is prepared for the illustration of the analytical methodology of COOS and its implementation in the creation of an expert system.

An Accessible Proteogenomics Informatics Resource for Cancer Researchers.

PubMed

Chambers, Matthew C; Jagtap, Pratik D; Johnson, James E; McGowan, Thomas; Kumar, Praveen; Onsongo, Getiria; Guerrero, Candace R; Barsnes, Harald; Vaudel, Marc; Martens, Lennart; Grüning, Björn; Cooke, Ira R; Heydarian, Mohammad; Reddy, Karen L; Griffin, Timothy J

2017-11-01

Proteogenomics has emerged as a valuable approach in cancer research, which integrates genomic and transcriptomic data with mass spectrometry-based proteomics data to directly identify expressed, variant protein sequences that may have functional roles in cancer. This approach is computationally intensive, requiring integration of disparate software tools into sophisticated workflows, challenging its adoption by nonexpert, bench scientists. To address this need, we have developed an extensible, Galaxy-based resource aimed at providing more researchers access to, and training in, proteogenomic informatics. Our resource brings together software from several leading research groups to address two foundational aspects of proteogenomics: (i) generation of customized, annotated protein sequence databases from RNA-Seq data; and (ii) accurate matching of tandem mass spectrometry data to putative variants, followed by filtering to confirm their novelty. Directions for accessing software tools and workflows, along with instructional documentation, can be found at z.umn.edu/canresgithub. Cancer Res; 77(21); e43-46. ©2017 AACR . ©2017 American Association for Cancer Research.

Onyx-Advanced Aeropropulsion Simulation Framework Created

NASA Technical Reports Server (NTRS)

Reed, John A.

2001-01-01

The Numerical Propulsion System Simulation (NPSS) project at the NASA Glenn Research Center is developing a new software environment for analyzing and designing aircraft engines and, eventually, space transportation systems. Its purpose is to dramatically reduce the time, effort, and expense necessary to design and test jet engines by creating sophisticated computer simulations of an aerospace object or system (refs. 1 and 2). Through a university grant as part of that effort, researchers at the University of Toledo have developed Onyx, an extensible Java-based (Sun Micro-systems, Inc.), objectoriented simulation framework, to investigate how advanced software design techniques can be successfully applied to aeropropulsion system simulation (refs. 3 and 4). The design of Onyx's architecture enables users to customize and extend the framework to add new functionality or adapt simulation behavior as required. It exploits object-oriented technologies, such as design patterns, domain frameworks, and software components, to develop a modular system in which users can dynamically replace components with others having different functionality.

DyNAMiC Workbench: an integrated development environment for dynamic DNA nanotechnology

PubMed Central

Grun, Casey; Werfel, Justin; Zhang, David Yu; Yin, Peng

2015-01-01

Dynamic DNA nanotechnology provides a promising avenue for implementing sophisticated assembly processes, mechanical behaviours, sensing and computation at the nanoscale. However, design of these systems is complex and error-prone, because the need to control the kinetic pathway of a system greatly increases the number of design constraints and possible failure modes for the system. Previous tools have automated some parts of the design workflow, but an integrated solution is lacking. Here, we present software implementing a three ‘tier’ design process: a high-level visual programming language is used to describe systems, a molecular compiler builds a DNA implementation and nucleotide sequences are generated and optimized. Additionally, our software includes tools for analysing and ‘debugging’ the designs in silico, and for importing/exporting designs to other commonly used software systems. The software we present is built on many existing pieces of software, but is integrated into a single package—accessible using a Web-based interface at http://molecular-systems.net/workbench. We hope that the deep integration between tools and the flexibility of this design process will lead to better experimental results, fewer experimental design iterations and the development of more complex DNA nanosystems. PMID:26423437

Ground Processing of Data From the Mars Exploration Rovers

NASA Technical Reports Server (NTRS)

Wright, Jesse; Sturdevant, Kathryn; Noble, David

2006-01-01

A computer program implements the Earth side of the protocol that governs the transfer of data files generated by the Mars Exploration Rovers. It also provides tools for viewing data in these files and integrating data-product files into automated and manual processes. It reconstitutes files from telemetry data packets. Even if only one packet is received, metadata provide enough information to enable this program to identify and use partial data products. This software can generate commands to acknowledge received files and retransmit missed parts of files, or it can feed a manual process to make decisions about retransmission. The software uses an Extensible Markup Language (XML) data dictionary to provide a generic capability for displaying files of basic types, and uses external "plug-in" application programs to provide more sophisticated displays. This program makes data products available with very low latency, and can trigger automated actions when complete or partial products are received. The software is easy to install and use. The only system requirement for installing the software is a Java J2SE 1.4 platform. Several instances of the software can be executed simultaneously on the same machine.

Moose: An Open-Source Framework to Enable Rapid Development of Collaborative, Multi-Scale, Multi-Physics Simulation Tools

NASA Astrophysics Data System (ADS)

Slaughter, A. E.; Permann, C.; Peterson, J. W.; Gaston, D.; Andrs, D.; Miller, J.

2014-12-01

The Idaho National Laboratory (INL)-developed Multiphysics Object Oriented Simulation Environment (MOOSE; www.mooseframework.org), is an open-source, parallel computational framework for enabling the solution of complex, fully implicit multiphysics systems. MOOSE provides a set of computational tools that scientists and engineers can use to create sophisticated multiphysics simulations. Applications built using MOOSE have computed solutions for chemical reaction and transport equations, computational fluid dynamics, solid mechanics, heat conduction, mesoscale materials modeling, geomechanics, and others. To facilitate the coupling of diverse and highly-coupled physical systems, MOOSE employs the Jacobian-free Newton-Krylov (JFNK) method when solving the coupled nonlinear systems of equations arising in multiphysics applications. The MOOSE framework is written in C++, and leverages other high-quality, open-source scientific software packages such as LibMesh, Hypre, and PETSc. MOOSE uses a "hybrid parallel" model which combines both shared memory (thread-based) and distributed memory (MPI-based) parallelism to ensure efficient resource utilization on a wide range of computational hardware. MOOSE-based applications are inherently modular, which allows for simulation expansion (via coupling of additional physics modules) and the creation of multi-scale simulations. Any application developed with MOOSE supports running (in parallel) any other MOOSE-based application. Each application can be developed independently, yet easily communicate with other applications (e.g., conductivity in a slope-scale model could be a constant input, or a complete phase-field micro-structure simulation) without additional code being written. This method of development has proven effective at INL and expedites the development of sophisticated, sustainable, and collaborative simulation tools.

Exascale computing and what it means for shock physics

NASA Astrophysics Data System (ADS)

Germann, Timothy

2015-06-01

The U.S. Department of Energy is preparing to launch an Exascale Computing Initiative, to address the myriad challenges required to deploy and effectively utilize an exascale-class supercomputer (i.e., one capable of performing 1018 operations per second) in the 2023 timeframe. Since physical (power dissipation) requirements limit clock rates to at most a few GHz, this will necessitate the coordination of on the order of a billion concurrent operations, requiring sophisticated system and application software, and underlying mathematical algorithms, that may differ radically from traditional approaches. Even at the smaller workstation or cluster level of computation, the massive concurrency and heterogeneity within each processor will impact computational scientists. Through the multi-institutional, multi-disciplinary Exascale Co-design Center for Materials in Extreme Environments (ExMatEx), we have initiated an early and deep collaboration between domain (computational materials) scientists, applied mathematicians, computer scientists, and hardware architects, in order to establish the relationships between algorithms, software stacks, and architectures needed to enable exascale-ready materials science application codes within the next decade. In my talk, I will discuss these challenges, and what it will mean for exascale-era electronic structure, molecular dynamics, and engineering-scale simulations of shock-compressed condensed matter. In particular, we anticipate that the emerging hierarchical, heterogeneous architectures can be exploited to achieve higher physical fidelity simulations using adaptive physics refinement. This work is supported by the U.S. Department of Energy, Office of Science, Office of Advanced Scientific Computing Research.

Use of three-dimensional computer graphic animation to illustrate cleft lip and palate surgery.

PubMed

Cutting, C; Oliker, A; Haring, J; Dayan, J; Smith, D

2002-01-01

Three-dimensional (3D) computer animation is not commonly used to illustrate surgical techniques. This article describes the surgery-specific processes that were required to produce animations to teach cleft lip and palate surgery. Three-dimensional models were created using CT scans of two Chinese children with unrepaired clefts (one unilateral and one bilateral). We programmed several custom software tools, including an incision tool, a forceps tool, and a fat tool. Three-dimensional animation was found to be particularly useful for illustrating surgical concepts. Positioning the virtual "camera" made it possible to view the anatomy from angles that are impossible to obtain with a real camera. Transparency allows the underlying anatomy to be seen during surgical repair while maintaining a view of the overlaying tissue relationships. Finally, the representation of motion allows modeling of anatomical mechanics that cannot be done with static illustrations. The animations presented in this article can be viewed on-line at http://www.smiletrain.org/programs/virtual_surgery2.htm. Sophisticated surgical procedures are clarified with the use of 3D animation software and customized software tools. The next step in the development of this technology is the creation of interactive simulators that recreate the experience of surgery in a safe, digital environment. Copyright 2003 Wiley-Liss, Inc.

Virtual Character Animation Based on Affordable Motion Capture and Reconfigurable Tangible Interfaces.

PubMed

Lamberti, Fabrizio; Paravati, Gianluca; Gatteschi, Valentina; Cannavo, Alberto; Montuschi, Paolo

2018-05-01

Software for computer animation is generally characterized by a steep learning curve, due to the entanglement of both sophisticated techniques and interaction methods required to control 3D geometries. This paper proposes a tool designed to support computer animation production processes by leveraging the affordances offered by articulated tangible user interfaces and motion capture retargeting solutions. To this aim, orientations of an instrumented prop are recorded together with animator's motion in the 3D space and used to quickly pose characters in the virtual environment. High-level functionalities of the animation software are made accessible via a speech interface, thus letting the user control the animation pipeline via voice commands while focusing on his or her hands and body motion. The proposed solution exploits both off-the-shelf hardware components (like the Lego Mindstorms EV3 bricks and the Microsoft Kinect, used for building the tangible device and tracking animator's skeleton) and free open-source software (like the Blender animation tool), thus representing an interesting solution also for beginners approaching the world of digital animation for the first time. Experimental results in different usage scenarios show the benefits offered by the designed interaction strategy with respect to a mouse & keyboard-based interface both for expert and non-expert users.

The personal computer and GP-B management. [Gravity Probe experiment

NASA Technical Reports Server (NTRS)

Neighbors, A. K.

1986-01-01

The Gravity Probe-B (GP-B) experiment is one of the most sophisticated and challenging developments to be undertaken by NASA. Its objective is to measure the relativistic drift of gyroscopes in orbit about the earth. In this paper, the experiment is described, and the strategy of phased procurements for accomplishing the engineering development of the hardware is discussed. The microcomputer is a very convenient and powerful tool in the management of GP-B. It is used in creating and monitoring such project data as schedules, budgets, hardware procurements and technical and interface requirements. Commercially available software in word processing, database management, communications, spreadsheet, graphics and program management are used. Examples are described of the efficacy of the application of the computer by the management team.

Application of advanced virtual reality and 3D computer assisted technologies in tele-3D-computer assisted surgery in rhinology.

PubMed

Klapan, Ivica; Vranjes, Zeljko; Prgomet, Drago; Lukinović, Juraj

2008-03-01

The real-time requirement means that the simulation should be able to follow the actions of the user that may be moving in the virtual environment. The computer system should also store in its memory a three-dimensional (3D) model of the virtual environment. In that case a real-time virtual reality system will update the 3D graphic visualization as the user moves, so that up-to-date visualization is always shown on the computer screen. Upon completion of the tele-operation, the surgeon compares the preoperative and postoperative images and models of the operative field, and studies video records of the procedure itself Using intraoperative records, animated images of the real tele-procedure performed can be designed. Virtual surgery offers the possibility of preoperative planning in rhinology. The intraoperative use of computer in real time requires development of appropriate hardware and software to connect medical instrumentarium with the computer and to operate the computer by thus connected instrumentarium and sophisticated multimedia interfaces.

Virtual Labs (Science Gateways) as platforms for Free and Open Source Science

NASA Astrophysics Data System (ADS)

Lescinsky, David; Car, Nicholas; Fraser, Ryan; Friedrich, Carsten; Kemp, Carina; Squire, Geoffrey

2016-04-01

The Free and Open Source Software (FOSS) movement promotes community engagement in software development, as well as provides access to a range of sophisticated technologies that would be prohibitively expensive if obtained commercially. However, as geoinformatics and eResearch tools and services become more dispersed, it becomes more complicated to identify and interface between the many required components. Virtual Laboratories (VLs, also known as Science Gateways) simplify the management and coordination of these components by providing a platform linking many, if not all, of the steps in particular scientific processes. These enable scientists to focus on their science, rather than the underlying supporting technologies. We describe a modular, open source, VL infrastructure that can be reconfigured to create VLs for a wide range of disciplines. Development of this infrastructure has been led by CSIRO in collaboration with Geoscience Australia and the National Computational Infrastructure (NCI) with support from the National eResearch Collaboration Tools and Resources (NeCTAR) and the Australian National Data Service (ANDS). Initially, the infrastructure was developed to support the Virtual Geophysical Laboratory (VGL), and has subsequently been repurposed to create the Virtual Hazards Impact and Risk Laboratory (VHIRL) and the reconfigured Australian National Virtual Geophysics Laboratory (ANVGL). During each step of development, new capabilities and services have been added and/or enhanced. We plan on continuing to follow this model using a shared, community code base. The VL platform facilitates transparent and reproducible science by providing access to both the data and methodologies used during scientific investigations. This is further enhanced by the ability to set up and run investigations using computational resources accessed through the VL. Data is accessed using registries pointing to catalogues within public data repositories (notably including the NCI National Environmental Research Data Interoperability Platform), or by uploading data directly from user supplied addresses or files. Similarly, scientific software is accessed through registries pointing to software repositories (e.g., GitHub). Runs are configured by using or modifying default templates designed by subject matter experts. After the appropriate computational resources are identified by the user, Virtual Machines (VMs) are spun up and jobs are submitted to service providers (currently the NeCTAR public cloud or Amazon Web Services). Following completion of the jobs the results can be reviewed and downloaded if desired. By providing a unified platform for science, the VL infrastructure enables sophisticated provenance capture and management. The source of input data (including both collection and queries), user information, software information (version and configuration details) and output information are all captured and managed as a VL resource which can be linked to output data sets. This provenance resource provides a mechanism for publication and citation for Free and Open Source Science.

CD-ROM And Knowledge Integration

NASA Astrophysics Data System (ADS)

Rann, Leonard S.

1988-06-01

As the title of this paper suggests, it is about CD-ROM technology and the structuring of massive databases. Even more, it is about the impact CD-ROM has had on the publication of massive amounts of information, and the unique qualities of the medium that allows for the most sophisticated computer retrieval techniques that have ever been used. I am not drawing on experience as a pedant in the educational field, but rather as a software and database designer who has worked with CD-ROM since its inception. I will be giving examples from my company's current applications, as well as discussing some of the challenges that face information publishers in the future. In particular I have a belief about what the most valuable outlet can be created using CD-ROM will be: The CD-ROM is particularly suited for the mass delivery of information systems and databases that either require or utilize a large amount of computational preprocessing to allow a real-time or interactive response to be achieved. Until the advent of CD-ROM technology this level of sophistication in publication was virtually impossible. I will further explain this later in this paper. First, I will discuss the salient features of CD-ROM that make it unique in the world of data storage for electronic publishing.

Modeling of the Human - Operator in a Complex System Functioning Under Extreme Conditions

NASA Astrophysics Data System (ADS)

Getzov, Peter; Hubenova, Zoia; Yordanov, Dimitar; Popov, Wiliam

2013-12-01

Problems, related to the explication of sophisticated control systems of objects, operating under extreme conditions, have been examined and the impact of the effectiveness of the operator's activity on the systems as a whole. The necessity of creation of complex simulation models, reflecting operator's activity, is discussed. Organizational and technical system of an unmanned aviation complex is described as a sophisticated ergatic system. Computer realization of main subsystems of algorithmic system of the man as a controlling system is implemented and specialized software for data processing and analysis is developed. An original computer model of a Man as a tracking system has been implemented. Model of unmanned complex for operators training and formation of a mental model in emergency situation, implemented in "matlab-simulink" environment, has been synthesized. As a unit of the control loop, the pilot (operator) is simplified viewed as an autocontrol system consisting of three main interconnected subsystems: sensitive organs (perception sensors); central nervous system; executive organs (muscles of the arms, legs, back). Theoretical-data model of prediction the level of operator's information load in ergatic systems is proposed. It allows the assessment and prediction of the effectiveness of a real working operator. Simulation model of operator's activity in takeoff based on the Petri nets has been synthesized.

BROCCOLI: Software for fast fMRI analysis on many-core CPUs and GPUs

PubMed Central

Eklund, Anders; Dufort, Paul; Villani, Mattias; LaConte, Stephen

2014-01-01

Analysis of functional magnetic resonance imaging (fMRI) data is becoming ever more computationally demanding as temporal and spatial resolutions improve, and large, publicly available data sets proliferate. Moreover, methodological improvements in the neuroimaging pipeline, such as non-linear spatial normalization, non-parametric permutation tests and Bayesian Markov Chain Monte Carlo approaches, can dramatically increase the computational burden. Despite these challenges, there do not yet exist any fMRI software packages which leverage inexpensive and powerful graphics processing units (GPUs) to perform these analyses. Here, we therefore present BROCCOLI, a free software package written in OpenCL (Open Computing Language) that can be used for parallel analysis of fMRI data on a large variety of hardware configurations. BROCCOLI has, for example, been tested with an Intel CPU, an Nvidia GPU, and an AMD GPU. These tests show that parallel processing of fMRI data can lead to significantly faster analysis pipelines. This speedup can be achieved on relatively standard hardware, but further, dramatic speed improvements require only a modest investment in GPU hardware. BROCCOLI (running on a GPU) can perform non-linear spatial normalization to a 1 mm3 brain template in 4–6 s, and run a second level permutation test with 10,000 permutations in about a minute. These non-parametric tests are generally more robust than their parametric counterparts, and can also enable more sophisticated analyses by estimating complicated null distributions. Additionally, BROCCOLI includes support for Bayesian first-level fMRI analysis using a Gibbs sampler. The new software is freely available under GNU GPL3 and can be downloaded from github (https://github.com/wanderine/BROCCOLI/). PMID:24672471

Present status and future of the sophisticated work station

NASA Astrophysics Data System (ADS)

Ishida, Haruhisa

The excellency of the work station is explained, by comparing the functions of software and hardware of work station with those of personal computer. As one of the examples utilizing the functions of work station, desk top publishing is explained. By describing the competition between the Group of ATT · Sun Microsystems which intends to have the leadership by integrating Berkeley version which is most popular at this moment and System V version, and the group led by IBM, future of UNIX as OS of work station is predicted. Development of RISC processor, TRON Plan and Sigma Projects by MITI are also mentioned as its background.

Software Analyzes Complex Systems in Real Time

NASA Technical Reports Server (NTRS)

2008-01-01

Expert system software programs, also known as knowledge-based systems, are computer programs that emulate the knowledge and analytical skills of one or more human experts, related to a specific subject. SHINE (Spacecraft Health Inference Engine) is one such program, a software inference engine (expert system) designed by NASA for the purpose of monitoring, analyzing, and diagnosing both real-time and non-real-time systems. It was developed to meet many of the Agency s demanding and rigorous artificial intelligence goals for current and future needs. NASA developed the sophisticated and reusable software based on the experience and requirements of its Jet Propulsion Laboratory s (JPL) Artificial Intelligence Research Group in developing expert systems for space flight operations specifically, the diagnosis of spacecraft health. It was designed to be efficient enough to operate in demanding real time and in limited hardware environments, and to be utilized by non-expert systems applications written in conventional programming languages. The technology is currently used in several ongoing NASA applications, including the Mars Exploration Rovers and the Spacecraft Health Automatic Reasoning Pilot (SHARP) program for the diagnosis of telecommunication anomalies during the Neptune Voyager Encounter. It is also finding applications outside of the Space Agency.

The Impact of a Simulation and Problem-Based Learning Design Project on Student Learning and Teamwork Skills. CSE Technical Report.

ERIC Educational Resources Information Center

Chung, Gregory K. W. K.

This study examined a civil engineering capstone course that embedded a sophisticated simulation-based task within instruction. Students (n=28) were required to conduct a hazardous waste site investigation using simulation software designed specifically for the course (Interactive Site Investigation Software) (ISIS). The software simulated…

Buying in to bioinformatics: an introduction to commercial sequence analysis software

PubMed Central

2015-01-01

Advancements in high-throughput nucleotide sequencing techniques have brought with them state-of-the-art bioinformatics programs and software packages. Given the importance of molecular sequence data in contemporary life science research, these software suites are becoming an essential component of many labs and classrooms, and as such are frequently designed for non-computer specialists and marketed as one-stop bioinformatics toolkits. Although beautifully designed and powerful, user-friendly bioinformatics packages can be expensive and, as more arrive on the market each year, it can be difficult for researchers, teachers and students to choose the right software for their needs, especially if they do not have a bioinformatics background. This review highlights some of the currently available and most popular commercial bioinformatics packages, discussing their prices, usability, features and suitability for teaching. Although several commercial bioinformatics programs are arguably overpriced and overhyped, many are well designed, sophisticated and, in my opinion, worth the investment. If you are just beginning your foray into molecular sequence analysis or an experienced genomicist, I encourage you to explore proprietary software bundles. They have the potential to streamline your research, increase your productivity, energize your classroom and, if anything, add a bit of zest to the often dry detached world of bioinformatics. PMID:25183247

Buying in to bioinformatics: an introduction to commercial sequence analysis software.

PubMed

Smith, David Roy

2015-07-01

Advancements in high-throughput nucleotide sequencing techniques have brought with them state-of-the-art bioinformatics programs and software packages. Given the importance of molecular sequence data in contemporary life science research, these software suites are becoming an essential component of many labs and classrooms, and as such are frequently designed for non-computer specialists and marketed as one-stop bioinformatics toolkits. Although beautifully designed and powerful, user-friendly bioinformatics packages can be expensive and, as more arrive on the market each year, it can be difficult for researchers, teachers and students to choose the right software for their needs, especially if they do not have a bioinformatics background. This review highlights some of the currently available and most popular commercial bioinformatics packages, discussing their prices, usability, features and suitability for teaching. Although several commercial bioinformatics programs are arguably overpriced and overhyped, many are well designed, sophisticated and, in my opinion, worth the investment. If you are just beginning your foray into molecular sequence analysis or an experienced genomicist, I encourage you to explore proprietary software bundles. They have the potential to streamline your research, increase your productivity, energize your classroom and, if anything, add a bit of zest to the often dry detached world of bioinformatics. © The Author 2014. Published by Oxford University Press.

Endovascular abdominal aortic aneurysm sizing and case planning using the TeraRecon Aquarius workstation.

PubMed

Lee, W Anthony

2007-01-01

The gold standard for preoperative evaluation of an aortic aneurysm is a computed tomography angiogram (CTA). Three-dimensional reconstruction and analysis of the computed tomography data set is enormously helpful, and even sometimes essential, in proper sizing and planning for endovascular stent graft repair. To a large extent, it has obviated the need for conventional angiography for morphologic evaluation. The TeraRecon Aquarius workstation (San Mateo, Calif) represents a highly sophisticated but user-friendly platform utilizing a combination of task-specific hardware and software specifically designed to rapidly manipulate large Digital Imaging and Communications in Medicine (DICOM) data sets and provide surface-shaded and multiplanar renderings in real-time. This article discusses the basics of sizing and planning for endovascular abdominal aortic aneurysm repair and the role of 3-dimensional analysis using the TeraRecon workstation.

Visualising higher order Brillouin zones with applications

NASA Astrophysics Data System (ADS)

Andrew, R. C.; Salagaram, T.; Chetty, N.

2017-05-01

A key concept in material science is the relationship between the Bravais lattice, the reciprocal lattice and the resulting Brillouin zones (BZ). These zones are often complicated shapes that are hard to construct and visualise without the use of sophisticated software, even by professional scientists. We have used a simple sorting algorithm to construct BZ of any order for a chosen Bravais lattice that is easy to implement in any scientific programming language. The resulting zones can then be visualised using freely available plotting software. This method has pedagogical value for upper-level undergraduate students since, along with other computational methods, it can be used to illustrate how constant-energy surfaces combine with these zones to create van Hove singularities in the density of states. In this paper we apply our algorithm along with the empirical pseudopotential method and the 2D equivalent of the tetrahedron method to show how they can be used in a simple software project to investigate this interaction for a 2D crystal. This project not only enhances students’ fundamental understanding of the principles involved but also improves transferable coding skills.

Unit cell-based computer-aided manufacturing system for tissue engineering.

PubMed

Kang, Hyun-Wook; Park, Jeong Hun; Kang, Tae-Yun; Seol, Young-Joon; Cho, Dong-Woo

2012-03-01

Scaffolds play an important role in the regeneration of artificial tissues or organs. A scaffold is a porous structure with a micro-scale inner architecture in the range of several to several hundreds of micrometers. Therefore, computer-aided construction of scaffolds should provide sophisticated functionality for porous structure design and a tool path generation strategy that can achieve micro-scale architecture. In this study, a new unit cell-based computer-aided manufacturing (CAM) system was developed for the automated design and fabrication of a porous structure with micro-scale inner architecture that can be applied to composite tissue regeneration. The CAM system was developed by first defining a data structure for the computing process of a unit cell representing a single pore structure. Next, an algorithm and software were developed and applied to construct porous structures with a single or multiple pore design using solid freeform fabrication technology and a 3D tooth/spine computer-aided design model. We showed that this system is quite feasible for the design and fabrication of a scaffold for tissue engineering.

Software Product Liability

DTIC Science & Technology

1993-08-01

disclaimers should be a top priority. Contract law involves the Uniform Commercial Code (UCC). This is an agreement between all the states (except...to contract law than this, the basic issue with software is that the sup- plier is generally an expert on an arcane and sophisticated technology and

SpecPad: device-independent NMR data visualization and processing based on the novel DART programming language and Html5 Web technology.

PubMed

Guigas, Bruno

2017-09-01

SpecPad is a new device-independent software program for the visualization and processing of one-dimensional and two-dimensional nuclear magnetic resonance (NMR) time domain (FID) and frequency domain (spectrum) data. It is the result of a project to investigate whether the novel programming language DART, in combination with Html5 Web technology, forms a suitable base to write an NMR data evaluation software which runs on modern computing devices such as Android, iOS, and Windows tablets as well as on Windows, Linux, and Mac OS X desktop PCs and notebooks. Another topic of interest is whether this technique also effectively supports the required sophisticated graphical and computational algorithms. SpecPad is device-independent because DART's compiled executable code is JavaScript and can, therefore, be run by the browsers of PCs and tablets. Because of Html5 browser cache technology, SpecPad may be operated off-line. Network access is only required during data import or export, e.g. via a Cloud service, or for software updates. A professional and easy to use graphical user interface consistent across all hardware platforms supports touch screen features on mobile devices for zooming and panning and for NMR-related interactive operations such as phasing, integration, peak picking, or atom assignment. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Computational oncology.

PubMed

Lefor, Alan T

2011-08-01

Oncology research has traditionally been conducted using techniques from the biological sciences. The new field of computational oncology has forged a new relationship between the physical sciences and oncology to further advance research. By applying physics and mathematics to oncologic problems, new insights will emerge into the pathogenesis and treatment of malignancies. One major area of investigation in computational oncology centers around the acquisition and analysis of data, using improved computing hardware and software. Large databases of cellular pathways are being analyzed to understand the interrelationship among complex biological processes. Computer-aided detection is being applied to the analysis of routine imaging data including mammography and chest imaging to improve the accuracy and detection rate for population screening. The second major area of investigation uses computers to construct sophisticated mathematical models of individual cancer cells as well as larger systems using partial differential equations. These models are further refined with clinically available information to more accurately reflect living systems. One of the major obstacles in the partnership between physical scientists and the oncology community is communications. Standard ways to convey information must be developed. Future progress in computational oncology will depend on close collaboration between clinicians and investigators to further the understanding of cancer using these new approaches.

Intelligent model-based diagnostics for vehicle health management

NASA Astrophysics Data System (ADS)

Luo, Jianhui; Tu, Fang; Azam, Mohammad S.; Pattipati, Krishna R.; Willett, Peter K.; Qiao, Liu; Kawamoto, Masayuki

2003-08-01

The recent advances in sensor technology, remote communication and computational capabilities, and standardized hardware/software interfaces are creating a dramatic shift in the way the health of vehicles is monitored and managed. These advances facilitate remote monitoring, diagnosis and condition-based maintenance of automotive systems. With the increased sophistication of electronic control systems in vehicles, there is a concomitant increased difficulty in the identification of the malfunction phenomena. Consequently, the current rule-based diagnostic systems are difficult to develop, validate and maintain. New intelligent model-based diagnostic methodologies that exploit the advances in sensor, telecommunications, computing and software technologies are needed. In this paper, we will investigate hybrid model-based techniques that seamlessly employ quantitative (analytical) models and graph-based dependency models for intelligent diagnosis. Automotive engineers have found quantitative simulation (e.g. MATLAB/SIMULINK) to be a vital tool in the development of advanced control systems. The hybrid method exploits this capability to improve the diagnostic system's accuracy and consistency, utilizes existing validated knowledge on rule-based methods, enables remote diagnosis, and responds to the challenges of increased system complexity. The solution is generic and has the potential for application in a wide range of systems.

Design approach of an aquaculture cage system for deployment in the constructed channel flow environments of a power plant

PubMed Central

Lee, Jihoon; Fredriksson, David W.; DeCew, Judson; Drach, Andrew; Yim, Solomon C.

2018-01-01

This study provides an engineering approach for designing an aquaculture cage system for use in constructed channel flow environments. As sustainable aquaculture has grown globally, many novel techniques have been introduced such as those implemented in the global Atlantic salmon industry. The advent of several highly sophisticated analysis software systems enables the development of such novel engineering techniques. These software systems commonly include three-dimensional (3D) drafting, computational fluid dynamics, and finite element analysis. In this study, a combination of these analysis tools is applied to evaluate a conceptual aquaculture system for potential deployment in a power plant effluent channel. The channel is supposedly clean; however, it includes elevated water temperatures and strong currents. The first portion of the analysis includes the design of a fish cage system with specific net solidities using 3D drafting techniques. Computational fluid dynamics is then applied to evaluate the flow reduction through the system from the previously generated solid models. Implementing the same solid models, a finite element analysis is performed on the critical components to assess the material stresses produced by the drag force loads that are calculated from the fluid velocities. PMID:29897954

[Application of virtual instrumentation technique in toxicological studies].

PubMed

Moczko, Jerzy A

2005-01-01

Research investigations require frequently direct connection of measuring equipment to the computer. Virtual instrumentation technique considerably facilitates programming of sophisticated acquisition-and-analysis procedures. In standard approach these two steps are performed subsequently with separate software tools. The acquired data are transfered with export / import procedures of particular program to the another one which executes next step of analysis. The described procedure is cumbersome, time consuming and may be potential source of the errors. In 1987 National Instruments Corporation introduced LabVIEW language based on the concept of graphical programming. Contrary to conventional textual languages it allows the researcher to concentrate on the resolved problem and omit all syntactical rules. Programs developed in LabVIEW are called as virtual instruments (VI) and are portable among different computer platforms as PCs, Macintoshes, Sun SPARCstations, Concurrent PowerMAX stations, HP PA/RISK workstations. This flexibility warrants that the programs prepared for one particular platform would be also appropriate to another one. In presented paper basic principles of connection of research equipment to computer systems were described.

Computer Assisted REhabilitation (CARE) Lab: A novel approach towards Pediatric Rehabilitation 2.0.

PubMed

Olivieri, Ivana; Meriggi, Paolo; Fedeli, Cristina; Brazzoli, Elena; Castagna, Anna; Roidi, Marina Luisa Rodocanachi; Angelini, Lucia

2018-01-01

Pediatric Rehabilitation therapists have always worked using a variety of off-the-shelf or custom-made objects and devices, more recently including computer based systems. These Information and Communication Technology (ICT) solutions vary widely in complexity, from easy-to-use interactive videogame consoles originally intended for entertainment purposes to sophisticated systems specifically developed for rehabilitation.This paper describes the principles underlying an innovative "Pediatric Rehabilitation 2.0" approach, based on the combination of suitable ICT solutions and traditional rehabilitation, which has been progressively refined while building up and using a computer-assisted rehabilitation laboratory. These principles are thus summarized in the acronym EPIQ, to account for the terms Ecological, Personalized, Interactive and Quantitative. The paper also presents the laboratory, which has been designed to meet the children's rehabilitation needs and to empower therapists in their work. The laboratory is equipped with commercial hardware and specially developed software called VITAMIN: a virtual reality platform for motor and cognitive rehabilitation.

Phylogenetic Analyses: A Toolbox Expanding towards Bayesian Methods

PubMed Central

Aris-Brosou, Stéphane; Xia, Xuhua

2008-01-01

The reconstruction of phylogenies is becoming an increasingly simple activity. This is mainly due to two reasons: the democratization of computing power and the increased availability of sophisticated yet user-friendly software. This review describes some of the latest additions to the phylogenetic toolbox, along with some of their theoretical and practical limitations. It is shown that Bayesian methods are under heavy development, as they offer the possibility to solve a number of long-standing issues and to integrate several steps of the phylogenetic analyses into a single framework. Specific topics include not only phylogenetic reconstruction, but also the comparison of phylogenies, the detection of adaptive evolution, and the estimation of divergence times between species. PMID:18483574

Design of a monitor and simulation terminal (master) for space station telerobotics and telescience

NASA Technical Reports Server (NTRS)

Lopez, L.; Konkel, C.; Harmon, P.; King, S.

1989-01-01

Based on Space Station and planetary spacecraft communication time delays and bandwidth limitations, it will be necessary to develop an intelligent, general purpose ground monitor terminal capable of sophisticated data display and control of on-orbit facilities and remote spacecraft. The basic elements that make up a Monitor and Simulation Terminal (MASTER) include computer overlay video, data compression, forward simulation, mission resource optimization and high level robotic control. Hardware and software elements of a MASTER are being assembled for testbed use. Applications of Neural Networks (NNs) to some key functions of a MASTER are also discussed. These functions are overlay graphics adjustment, object correlation and kinematic-dynamic characterization of the manipulator.

Advanced construction management for lunar base construction - Surface operations planner

NASA Technical Reports Server (NTRS)

Kehoe, Robert P.

1992-01-01

The study proposes a conceptual solution and lays the framework for developing a new, sophisticated and intelligent tool for a lunar base construction crew to use. This concept integrates expert systems for critical decision making, virtual reality for training, logistics and laydown optimization, automated productivity measurements, and an advanced scheduling tool to form a unique new planning tool. The concept features extensive use of computers and expert systems software to support the actual work, while allowing the crew to control the project from the lunar surface. Consideration is given to a logistics data base, laydown area management, flexible critical progress scheduler, video simulation of assembly tasks, and assembly information and tracking documentation.

A digitally implemented preambleless demodulator for maritime and mobile data communications

NASA Astrophysics Data System (ADS)

Chalmers, Harvey; Shenoy, Ajit; Verahrami, Farhad B.

The hardware design and software algorithms for a low-bit-rate, low-cost, all-digital preambleless demodulator are described. The demodulator operates under severe high-noise conditions, fast Doppler frequency shifts, large frequency offsets, and multipath fading. Sophisticated algorithms, including a fast Fourier transform (FFT)-based burst acquisition algorithm, a cycle-slip resistant carrier phase tracker, an innovative Doppler tracker, and a fast acquisition symbol synchronizer, were developed and extensively simulated for reliable burst reception. The compact digital signal processor (DSP)-based demodulator hardware uses a unique personal computer test interface for downloading test data files. The demodulator test results demonstrate a near-ideal performance within 0.2 dB of theory.

The Design of Lessons Using Mathematics Analysis Software to Support Multiple Representations in Secondary School Mathematics

ERIC Educational Resources Information Center

Pierce, Robyn; Stacey, Kaye; Wander, Roger; Ball, Lynda

2011-01-01

Current technologies incorporating sophisticated mathematical analysis software (calculation, graphing, dynamic geometry, tables, and more) provide easy access to multiple representations of mathematical problems. Realising the affordances of such technology for students' learning requires carefully designed lessons. This paper reports on design…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This paper reports on an automated metering/proving system for custody transfer of crude oil at the Phillips 66 Co. tanker unloading terminal in Freeport, Texas. It is described as one of the most sophisticated systems developed. The menu-driven, one-button automation removes the proving sequence entirely from manual control. The system also is the to be cost-effective and versatile compared to a dedicated flow computer with API calculation capabilities. Developed by Puffer-Sweiven, systems integrators, the new technology additionally is thought to be the first custody transfer system to employ a programmable logic controller (PLC). The PLC provides the automation, gathers andmore » stores all raw data, and prints alarms. Also the system uses a personal computer operator interface (OI) that runs on the Intel iRMX real time operating system. The OI is loaded with Puffer-Sweiven application software that performs API meter factor and volume correction calculations as well as present color graphics and generate reports.« less

The effects of different representations on static structure analysis of computer malware signatures.

PubMed

Narayanan, Ajit; Chen, Yi; Pang, Shaoning; Tao, Ban

2013-01-01

The continuous growth of malware presents a problem for internet computing due to increasingly sophisticated techniques for disguising malicious code through mutation and the time required to identify signatures for use by antiviral software systems (AVS). Malware modelling has focused primarily on semantics due to the intended actions and behaviours of viral and worm code. The aim of this paper is to evaluate a static structure approach to malware modelling using the growing malware signature databases now available. We show that, if malware signatures are represented as artificial protein sequences, it is possible to apply standard sequence alignment techniques in bioinformatics to improve accuracy of distinguishing between worm and virus signatures. Moreover, aligned signature sequences can be mined through traditional data mining techniques to extract metasignatures that help to distinguish between viral and worm signatures. All bioinformatics and data mining analysis were performed on publicly available tools and Weka.

The Effects of Different Representations on Static Structure Analysis of Computer Malware Signatures

PubMed Central

Narayanan, Ajit; Chen, Yi; Pang, Shaoning; Tao, Ban

2013-01-01

The continuous growth of malware presents a problem for internet computing due to increasingly sophisticated techniques for disguising malicious code through mutation and the time required to identify signatures for use by antiviral software systems (AVS). Malware modelling has focused primarily on semantics due to the intended actions and behaviours of viral and worm code. The aim of this paper is to evaluate a static structure approach to malware modelling using the growing malware signature databases now available. We show that, if malware signatures are represented as artificial protein sequences, it is possible to apply standard sequence alignment techniques in bioinformatics to improve accuracy of distinguishing between worm and virus signatures. Moreover, aligned signature sequences can be mined through traditional data mining techniques to extract metasignatures that help to distinguish between viral and worm signatures. All bioinformatics and data mining analysis were performed on publicly available tools and Weka. PMID:23983644

Physically Based Virtual Surgery Planning and Simulation Tools for Personal Health Care Systems

NASA Astrophysics Data System (ADS)

Dogan, Firat; Atilgan, Yasemin

The virtual surgery planning and simulation tools have gained a great deal of importance in the last decade in a consequence of increasing capacities at the information technology level. The modern hardware architectures, large scale database systems, grid based computer networks, agile development processes, better 3D visualization and all the other strong aspects of the information technology brings necessary instruments into almost every desk. The last decade’s special software and sophisticated super computer environments are now serving to individual needs inside “tiny smart boxes” for reasonable prices. However, resistance to learning new computerized environments, insufficient training and all the other old habits prevents effective utilization of IT resources by the specialists of the health sector. In this paper, all the aspects of the former and current developments in surgery planning and simulation related tools are presented, future directions and expectations are investigated for better electronic health care systems.

Image processing and pattern recognition with CVIPtools MATLAB toolbox: automatic creation of masks for veterinary thermographic images

NASA Astrophysics Data System (ADS)

Mishra, Deependra K.; Umbaugh, Scott E.; Lama, Norsang; Dahal, Rohini; Marino, Dominic J.; Sackman, Joseph

2016-09-01

CVIPtools is a software package for the exploration of computer vision and image processing developed in the Computer Vision and Image Processing Laboratory at Southern Illinois University Edwardsville. CVIPtools is available in three variants - a) CVIPtools Graphical User Interface, b) CVIPtools C library and c) CVIPtools MATLAB toolbox, which makes it accessible to a variety of different users. It offers students, faculty, researchers and any user a free and easy way to explore computer vision and image processing techniques. Many functions have been implemented and are updated on a regular basis, the library has reached a level of sophistication that makes it suitable for both educational and research purposes. In this paper, the detail list of the functions available in the CVIPtools MATLAB toolbox are presented and how these functions can be used in image analysis and computer vision applications. The CVIPtools MATLAB toolbox allows the user to gain practical experience to better understand underlying theoretical problems in image processing and pattern recognition. As an example application, the algorithm for the automatic creation of masks for veterinary thermographic images is presented.

Structural variation discovery in the cancer genome using next generation sequencing: Computational solutions and perspectives

PubMed Central

Liu, Biao; Conroy, Jeffrey M.; Morrison, Carl D.; Odunsi, Adekunle O.; Qin, Maochun; Wei, Lei; Trump, Donald L.; Johnson, Candace S.; Liu, Song; Wang, Jianmin

2015-01-01

Somatic Structural Variations (SVs) are a complex collection of chromosomal mutations that could directly contribute to carcinogenesis. Next Generation Sequencing (NGS) technology has emerged as the primary means of interrogating the SVs of the cancer genome in recent investigations. Sophisticated computational methods are required to accurately identify the SV events and delineate their breakpoints from the massive amounts of reads generated by a NGS experiment. In this review, we provide an overview of current analytic tools used for SV detection in NGS-based cancer studies. We summarize the features of common SV groups and the primary types of NGS signatures that can be used in SV detection methods. We discuss the principles and key similarities and differences of existing computational programs and comment on unresolved issues related to this research field. The aim of this article is to provide a practical guide of relevant concepts, computational methods, software tools and important factors for analyzing and interpreting NGS data for the detection of SVs in the cancer genome. PMID:25849937

SpaceWire- Based Control System Architecture for the Lightweight Advanced Robotic Arm Demonstrator [LARAD

NASA Astrophysics Data System (ADS)

Rucinski, Marek; Coates, Adam; Montano, Giuseppe; Allouis, Elie; Jameux, David

2015-09-01

The Lightweight Advanced Robotic Arm Demonstrator (LARAD) is a state-of-the-art, two-meter long robotic arm for planetary surface exploration currently being developed by a UK consortium led by Airbus Defence and Space Ltd under contract to the UK Space Agency (CREST-2 programme). LARAD has a modular design, which allows for experimentation with different electronics and control software. The control system architecture includes the on-board computer, control software and firmware, and the communication infrastructure (e.g. data links, switches) connecting on-board computer(s), sensors, actuators and the end-effector. The purpose of the control system is to operate the arm according to pre-defined performance requirements, monitoring its behaviour in real-time and performing safing/recovery actions in case of faults. This paper reports on the results of a recent study about the feasibility of the development and integration of a novel control system architecture for LARAD fully based on the SpaceWire protocol. The current control system architecture is based on the combination of two communication protocols, Ethernet and CAN. The new SpaceWire-based control system will allow for improved monitoring and telecommanding performance thanks to higher communication data rate, allowing for the adoption of advanced control schemes, potentially based on multiple vision sensors, and for the handling of sophisticated end-effectors that require fine control, such as science payloads or robotic hands.

New technologies for advanced three-dimensional optimum shape design in aeronautics

NASA Astrophysics Data System (ADS)

Dervieux, Alain; Lanteri, Stéphane; Malé, Jean-Michel; Marco, Nathalie; Rostaing-Schmidt, Nicole; Stoufflet, Bruno

1999-05-01

The analysis of complex flows around realistic aircraft geometries is becoming more and more predictive. In order to obtain this result, the complexity of flow analysis codes has been constantly increasing, involving more refined fluid models and sophisticated numerical methods. These codes can only run on top computers, exhausting their memory and CPU capabilities. It is, therefore, difficult to introduce best analysis codes in a shape optimization loop: most previous works in the optimum shape design field used only simplified analysis codes. Moreover, as the most popular optimization methods are the gradient-based ones, the more complex the flow solver, the more difficult it is to compute the sensitivity code. However, emerging technologies are contributing to make such an ambitious project, of including a state-of-the-art flow analysis code into an optimisation loop, feasible. Among those technologies, there are three important issues that this paper wishes to address: shape parametrization, automated differentiation and parallel computing. Shape parametrization allows faster optimization by reducing the number of design variable; in this work, it relies on a hierarchical multilevel approach. The sensitivity code can be obtained using automated differentiation. The automated approach is based on software manipulation tools, which allow the differentiation to be quick and the resulting differentiated code to be rather fast and reliable. In addition, the parallel algorithms implemented in this work allow the resulting optimization software to run on increasingly larger geometries. Copyright

HEP Software Foundation Community White Paper Working Group - Data Analysis and Interpretation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bauerdick, Lothar

At the heart of experimental high energy physics (HEP) is the development of facilities and instrumentation that provide sensitivity to new phenomena. Our understanding of nature at its most fundamental level is advanced through the analysis and interpretation of data from sophisticated detectors in HEP experiments. The goal of data analysis systems is to realize the maximum possible scientific potential of the data within the constraints of computing and human resources in the least time. To achieve this goal, future analysis systems should empower physicists to access the data with a high level of interactivity, reproducibility and throughput capability. Asmore » part of the HEP Software Foundation Community White Paper process, a working group on Data Analysis and Interpretation was formed to assess the challenges and opportunities in HEP data analysis and develop a roadmap for activities in this area over the next decade. In this report, the key findings and recommendations of the Data Analysis and Interpretation Working Group are presented.« less

A reconfigurable visual-programming library for real-time closed-loop cellular electrophysiology

PubMed Central

Biró, István; Giugliano, Michele

2015-01-01

Most of the software platforms for cellular electrophysiology are limited in terms of flexibility, hardware support, ease of use, or re-configuration and adaptation for non-expert users. Moreover, advanced experimental protocols requiring real-time closed-loop operation to investigate excitability, plasticity, dynamics, are largely inaccessible to users without moderate to substantial computer proficiency. Here we present an approach based on MATLAB/Simulink, exploiting the benefits of LEGO-like visual programming and configuration, combined to a small, but easily extendible library of functional software components. We provide and validate several examples, implementing conventional and more sophisticated experimental protocols such as dynamic-clamp or the combined use of intracellular and extracellular methods, involving closed-loop real-time control. The functionality of each of these examples is demonstrated with relevant experiments. These can be used as a starting point to create and support a larger variety of electrophysiological tools and methods, hopefully extending the range of default techniques and protocols currently employed in experimental labs across the world. PMID:26157385

The interactive digital video interface

NASA Technical Reports Server (NTRS)

Doyle, Michael D.

1989-01-01

A frequent complaint in the computer oriented trade journals is that current hardware technology is progressing so quickly that software developers cannot keep up. A example of this phenomenon can be seen in the field of microcomputer graphics. To exploit the advantages of new mechanisms of information storage and retrieval, new approaches must be made towards incorporating existing programs as well as developing entirely new applications. A particular area of need is the correlation of discrete image elements to textural information. The interactive digital video (IDV) interface embodies a new concept in software design which addresses these needs. The IDV interface is a patented device and language independent process for identifying image features on a digital video display and which allows a number of different processes to be keyed to that identification. Its capabilities include the correlation of discrete image elements to relevant text information and the correlation of these image features to other images as well as to program control mechanisms. Sophisticated interrelationships can be set up between images, text, and program control mechanisms.

Effective Materials Property Information Management for the 21st Century

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Weiju; Cebon, David; Arnold, Steve

2010-01-01

This paper discusses key principles for the development of materials property information management software systems. There are growing needs for automated materials information management in industry, research organizations and government agencies. In part these are fuelled by the demands for higher efficiency in material testing, product design and development and engineering analysis. But equally important, organizations are being driven to employ sophisticated methods and software tools for managing their mission-critical materials information by the needs for consistency, quality and traceability of data, as well as control of access to proprietary or sensitive information. Furthermore the use of increasingly sophisticated nonlinear,more » anisotropic and multi-scale engineering analysis approaches, particularly for composite materials, requires both processing of much larger volumes of test data for development of constitutive models and much more complex materials data input requirements for Computer-Aided Engineering (CAE) software. And finally, the globalization of engineering processes and outsourcing of design and development activities generates much greater needs for sharing a single gold source of materials information between members of global engineering teams in extended supply-chains. Fortunately material property management systems have kept pace with the growing user demands. They have evolved from hard copy archives, through simple electronic databases, to versatile data management systems that can be customized to specific user needs. The more sophisticated of these provide facilities for: (i) data management functions such as access control, version control, and quality control; (ii) a wide range of data import, export and analysis capabilities; (iii) mechanisms for ensuring that all data is traceable to its pedigree sources: details of testing programs, published sources, etc; (iv) tools for searching, reporting and viewing the data; and (v) access to the information via a wide range of interfaces, including web browsers, rich clients, programmatic access and clients embedded in third-party applications, such as CAE systems. This paper discusses the important requirements for advanced material data management systems as well as the future challenges and opportunities such as automated error checking, automated data quality assessment and characterization, identification of gaps in data, as well as functionalities and business models to keep users returning to the source: to generate user demand to fuel database growth and maintenance.« less

After Losing Users in Catalogs, Libraries Find Better Search Software

ERIC Educational Resources Information Center

Parry, Marc

2010-01-01

Traditional online library catalogs do not tend to order search results by ranked relevance, and they can befuddle users with clunky interfaces. However, that's changing because of two technology trends. First, a growing number of universities are shelling out serious money for sophisticated software that makes exploring their collections more…

Aircraft integrated design and analysis: A classroom experience

NASA Technical Reports Server (NTRS)

1988-01-01

AAE 451 is the capstone course required of all senior undergraduates in the School of Aeronautics and Astronautics at Purdue University. During the past year the first steps of a long evolutionary process were taken to change the content and expectations of this course. These changes are the result of the availability of advanced computational capabilities and sophisticated electronic media availability at Purdue. This presentation will describe both the long range objectives and this year's experience using the High Speed Commercial Transport (HSCT) design, the AIAA Long Duration Aircraft design and a Remotely Piloted Vehicle (RPV) design proposal as project objectives. The central goal of these efforts was to provide a user-friendly, computer-software-based, environment to supplement traditional design course methodology. The Purdue University Computer Center (PUCC), the Engineering Computer Network (ECN), and stand-alone PC's were used for this development. This year's accomplishments centered primarily on aerodynamics software obtained from the NASA Langley Research Center and its integration into the classroom. Word processor capability for oral and written work and computer graphics were also blended into the course. A total of 10 HSCT designs were generated, ranging from twin-fuselage and forward-swept wing aircraft, to the more traditional delta and double-delta wing aircraft. Four Long Duration Aircraft designs were submitted, together with one RPV design tailored for photographic surveillance. Supporting these activities were three video satellite lectures beamed from NASA/Langley to Purdue. These lectures covered diverse areas such as an overview of HSCT design, supersonic-aircraft stability and control, and optimization of aircraft performance. Plans for next year's effort will be reviewed, including dedicated computer workstation utilization, remote satellite lectures, and university/industrial cooperative efforts.

Inferring population history with DIY ABC: a user-friendly approach to approximate Bayesian computation.

PubMed

Cornuet, Jean-Marie; Santos, Filipe; Beaumont, Mark A; Robert, Christian P; Marin, Jean-Michel; Balding, David J; Guillemaud, Thomas; Estoup, Arnaud

2008-12-01

Genetic data obtained on population samples convey information about their evolutionary history. Inference methods can extract part of this information but they require sophisticated statistical techniques that have been made available to the biologist community (through computer programs) only for simple and standard situations typically involving a small number of samples. We propose here a computer program (DIY ABC) for inference based on approximate Bayesian computation (ABC), in which scenarios can be customized by the user to fit many complex situations involving any number of populations and samples. Such scenarios involve any combination of population divergences, admixtures and population size changes. DIY ABC can be used to compare competing scenarios, estimate parameters for one or more scenarios and compute bias and precision measures for a given scenario and known values of parameters (the current version applies to unlinked microsatellite data). This article describes key methods used in the program and provides its main features. The analysis of one simulated and one real dataset, both with complex evolutionary scenarios, illustrates the main possibilities of DIY ABC. The software DIY ABC is freely available at http://www.montpellier.inra.fr/CBGP/diyabc.

Verification of Software: The Textbook and Real Problems

NASA Technical Reports Server (NTRS)

Carlson, Jan-Renee

2006-01-01

The process of verification, or determining the order of accuracy of computational codes, can be problematic when working with large, legacy computational methods that have been used extensively in industry or government. Verification does not ensure that the computer program is producing a physically correct solution, it ensures merely that the observed order of accuracy of solutions are the same as the theoretical order of accuracy. The Method of Manufactured Solutions (MMS) is one of several ways for determining the order of accuracy. MMS is used to verify a series of computer codes progressing in sophistication from "textbook" to "real life" applications. The degree of numerical precision in the computations considerably influenced the range of mesh density to achieve the theoretical order of accuracy even for 1-D problems. The choice of manufactured solutions and mesh form shifted the observed order in specific areas but not in general. Solution residual (iterative) convergence was not always achieved for 2-D Euler manufactured solutions. L(sub 2,norm) convergence differed variable to variable therefore an observed order of accuracy could not be determined conclusively in all cases, the cause of which is currently under investigation.

VBA: A Probabilistic Treatment of Nonlinear Models for Neurobiological and Behavioural Data

PubMed Central

Daunizeau, Jean; Adam, Vincent; Rigoux, Lionel

2014-01-01

This work is in line with an on-going effort tending toward a computational (quantitative and refutable) understanding of human neuro-cognitive processes. Many sophisticated models for behavioural and neurobiological data have flourished during the past decade. Most of these models are partly unspecified (i.e. they have unknown parameters) and nonlinear. This makes them difficult to peer with a formal statistical data analysis framework. In turn, this compromises the reproducibility of model-based empirical studies. This work exposes a software toolbox that provides generic, efficient and robust probabilistic solutions to the three problems of model-based analysis of empirical data: (i) data simulation, (ii) parameter estimation/model selection, and (iii) experimental design optimization. PMID:24465198

Effective Materials Property Information Management for the 21st Century

NASA Technical Reports Server (NTRS)

Ren, Weiju; Cebon, David; Arnold, Steve

2009-01-01

This paper discusses key principles for the development of materials property information management software systems. There are growing needs for automated materials information management in various organizations. In part these are fueled by the demands for higher efficiency in material testing, product design and engineering analysis. But equally important, organizations are being driven by the need for consistency, quality and traceability of data, as well as control of access to sensitive information such as proprietary data. Further, the use of increasingly sophisticated nonlinear, anisotropic and multi-scale engineering analyses requires both processing of large volumes of test data for development of constitutive models and complex materials data input for Computer-Aided Engineering (CAE) software. And finally, the globalization of economy often generates great needs for sharing a single "gold source" of materials information between members of global engineering teams in extended supply chains. Fortunately, material property management systems have kept pace with the growing user demands and evolved to versatile data management systems that can be customized to specific user needs. The more sophisticated of these provide facilities for: (i) data management functions such as access, version, and quality controls; (ii) a wide range of data import, export and analysis capabilities; (iii) data "pedigree" traceability mechanisms; (iv) data searching, reporting and viewing tools; and (v) access to the information via a wide range of interfaces. In this paper the important requirements for advanced material data management systems, future challenges and opportunities such as automated error checking, data quality characterization, identification of gaps in datasets, as well as functionalities and business models to fuel database growth and maintenance are discussed.

Taming the BEAST—A Community Teaching Material Resource for BEAST 2

PubMed Central

Barido-Sottani, Joëlle; Bošková, Veronika; Plessis, Louis Du; Kühnert, Denise; Magnus, Carsten; Mitov, Venelin; Müller, Nicola F.; PečErska, Jūlija; Rasmussen, David A.; Zhang, Chi; Drummond, Alexei J.; Heath, Tracy A.; Pybus, Oliver G.; Vaughan, Timothy G.; Stadler, Tanja

2018-01-01

Abstract Phylogenetics and phylodynamics are central topics in modern evolutionary biology. Phylogenetic methods reconstruct the evolutionary relationships among organisms, whereas phylodynamic approaches reveal the underlying diversification processes that lead to the observed relationships. These two fields have many practical applications in disciplines as diverse as epidemiology, developmental biology, palaeontology, ecology, and linguistics. The combination of increasingly large genetic data sets and increases in computing power is facilitating the development of more sophisticated phylogenetic and phylodynamic methods. Big data sets allow us to answer complex questions. However, since the required analyses are highly specific to the particular data set and question, a black-box method is not sufficient anymore. Instead, biologists are required to be actively involved with modeling decisions during data analysis. The modular design of the Bayesian phylogenetic software package BEAST 2 enables, and in fact enforces, this involvement. At the same time, the modular design enables computational biology groups to develop new methods at a rapid rate. A thorough understanding of the models and algorithms used by inference software is a critical prerequisite for successful hypothesis formulation and assessment. In particular, there is a need for more readily available resources aimed at helping interested scientists equip themselves with the skills to confidently use cutting-edge phylogenetic analysis software. These resources will also benefit researchers who do not have access to similar courses or training at their home institutions. Here, we introduce the “Taming the Beast” (https://taming-the-beast.github.io/) resource, which was developed as part of a workshop series bearing the same name, to facilitate the usage of the Bayesian phylogenetic software package BEAST 2. PMID:28673048

Taming the BEAST-A Community Teaching Material Resource for BEAST 2.

PubMed

Barido-Sottani, Joëlle; Bošková, Veronika; Plessis, Louis Du; Kühnert, Denise; Magnus, Carsten; Mitov, Venelin; Müller, Nicola F; PecErska, Julija; Rasmussen, David A; Zhang, Chi; Drummond, Alexei J; Heath, Tracy A; Pybus, Oliver G; Vaughan, Timothy G; Stadler, Tanja

2018-01-01

Phylogenetics and phylodynamics are central topics in modern evolutionary biology. Phylogenetic methods reconstruct the evolutionary relationships among organisms, whereas phylodynamic approaches reveal the underlying diversification processes that lead to the observed relationships. These two fields have many practical applications in disciplines as diverse as epidemiology, developmental biology, palaeontology, ecology, and linguistics. The combination of increasingly large genetic data sets and increases in computing power is facilitating the development of more sophisticated phylogenetic and phylodynamic methods. Big data sets allow us to answer complex questions. However, since the required analyses are highly specific to the particular data set and question, a black-box method is not sufficient anymore. Instead, biologists are required to be actively involved with modeling decisions during data analysis. The modular design of the Bayesian phylogenetic software package BEAST 2 enables, and in fact enforces, this involvement. At the same time, the modular design enables computational biology groups to develop new methods at a rapid rate. A thorough understanding of the models and algorithms used by inference software is a critical prerequisite for successful hypothesis formulation and assessment. In particular, there is a need for more readily available resources aimed at helping interested scientists equip themselves with the skills to confidently use cutting-edge phylogenetic analysis software. These resources will also benefit researchers who do not have access to similar courses or training at their home institutions. Here, we introduce the "Taming the Beast" (https://taming-the-beast.github.io/) resource, which was developed as part of a workshop series bearing the same name, to facilitate the usage of the Bayesian phylogenetic software package BEAST 2. © The Author(s) 2017. Published by Oxford University Press, on behalf of the Society of Systematic Biologists.

Securing Ground Data System Applications for Space Operations

NASA Technical Reports Server (NTRS)

Pajevski, Michael J.; Tso, Kam S.; Johnson, Bryan

2014-01-01

The increasing prevalence and sophistication of cyber attacks has prompted the Multimission Ground Systems and Services (MGSS) Program Office at Jet Propulsion Laboratory (JPL) to initiate the Common Access Manager (CAM) effort to protect software applications used in Ground Data Systems (GDSs) at JPL and other NASA Centers. The CAM software provides centralized services and software components used by GDS subsystems to meet access control requirements and ensure data integrity, confidentiality, and availability. In this paper we describe the CAM software; examples of its integration with spacecraft commanding software applications and an information management service; and measurements of its performance and reliability.

Software testing

NASA Astrophysics Data System (ADS)

Price-Whelan, Adrian M.

2016-01-01

Now more than ever, scientific results are dependent on sophisticated software and analysis. Why should we trust code written by others? How do you ensure your own code produces sensible results? How do you make sure it continues to do so as you update, modify, and add functionality? Software testing is an integral part of code validation and writing tests should be a requirement for any software project. I will talk about Python-based tools that make managing and running tests much easier and explore some statistics for projects hosted on GitHub that contain tests.

Advanced fingerprint verification software

NASA Astrophysics Data System (ADS)

Baradarani, A.; Taylor, J. R. B.; Severin, F.; Maev, R. Gr.

2016-05-01

We have developed a fingerprint software package that can be used in a wide range of applications from law enforcement to public and private security systems, and to personal devices such as laptops, vehicles, and door- locks. The software and processing units are a unique implementation of new and sophisticated algorithms that compete with the current best systems in the world. Development of the software package has been in line with the third generation of our ultrasonic fingerprinting machine1. Solid and robust performance is achieved in the presence of misplaced and low quality fingerprints.

The Iodine Spectrum: A New Look at an Old Topic

NASA Astrophysics Data System (ADS)

Long, George; Sauder, Deborah; Shalhoub, George M.; Stout, Roland; Hamby Towns, Marcy; Zielinski, Theresa Julia

1999-06-01

This paper describes a new approach to the traditional iodine gas absorption spectrum experiment often performed in undergraduate physical chemistry labs. The approach is student centered and designed to emphasize the conceptual richness in this classic experiment. It gives students the opportunity to examine the conceptual and mathematical connections between spectroscopic data and quantum models by organizing the material in conceptual chunks, which they work through sequentially. Students use symbolic mathematics software, Mathcad, to expedite the sophisticated numerical calculations required. The curricular chunks were specifically constructed to make the sophisticated concepts embedded in the project accessible. The focus activities remind the students of information they already know and require them to employ both paper and pencil and computer worksheets to complete calculations. Five Mathcad templates provide a rich mathematical treatment of the topics in this experiment. This paper describes how the documents MorsePotential.mcd, BirgeSponer.mcd, IodineSpectrum.mcd, FranckCondonBackground.mcd, and FranckCondonComputation.mcd are used during the three weeks in which this experiment can be performed by a typical physical chemistry student. Although originally designed to use the WWW to disseminate information and promote interaction among physical chemistry students at geographically dispersed institutions, this segmented focus-question approach to the iodine experiment has also been used by a physical chemistry class at a single campus. In both formats, faculty noticed decreased anxiety of the students towards the experiment and an increase in the quality of laboratory reports that indicated better understanding of the chemical concepts.

Netwar

NASA Astrophysics Data System (ADS)

Keen, Arthur A.

2006-04-01

This paper describes technology being developed at 21st Century Technologies to automate Computer Network Operations (CNO). CNO refers to DoD activities related to Attacking and Defending Computer Networks (CNA & CND). Next generation cyber threats are emerging in the form of powerful Internet services and tools that automate intelligence gathering, planning, testing, and surveillance. We will focus on "Search-Engine Hacks", queries that can retrieve lists of router/switch/server passwords, control panels, accessible cameras, software keys, VPN connection files, and vulnerable web applications. Examples include "Titan Rain" attacks against DoD facilities and the Santy worm, which identifies vulnerable sites by searching Google for URLs containing application-specific strings. This trend will result in increasingly sophisticated and automated intelligence-driven cyber attacks coordinated across multiple domains that are difficult to defeat or even understand with current technology. One traditional method of CNO relies on surveillance detection as an attack predictor. Unfortunately, surveillance detection is difficult because attackers can perform search engine-driven surveillance such as with Google Hacks, and avoid touching the target site. Therefore, attack observables represent only about 5% of the attacker's total attack time, and are inadequate to provide warning. In order to predict attacks and defend against them, CNO must also employ more sophisticated techniques and work to understand the attacker's Motives, Means and Opportunities (MMO). CNO must use automated reconnaissance tools, such as Google, to identify information vulnerabilities, and then utilize Internet tools to observe the intelligence gathering, planning, testing, and collaboration activities that represent 95% of the attacker's effort.

Nipype: a flexible, lightweight and extensible neuroimaging data processing framework in python.

PubMed

Gorgolewski, Krzysztof; Burns, Christopher D; Madison, Cindee; Clark, Dav; Halchenko, Yaroslav O; Waskom, Michael L; Ghosh, Satrajit S

2011-01-01

Current neuroimaging software offer users an incredible opportunity to analyze their data in different ways, with different underlying assumptions. Several sophisticated software packages (e.g., AFNI, BrainVoyager, FSL, FreeSurfer, Nipy, R, SPM) are used to process and analyze large and often diverse (highly multi-dimensional) data. However, this heterogeneous collection of specialized applications creates several issues that hinder replicable, efficient, and optimal use of neuroimaging analysis approaches: (1) No uniform access to neuroimaging analysis software and usage information; (2) No framework for comparative algorithm development and dissemination; (3) Personnel turnover in laboratories often limits methodological continuity and training new personnel takes time; (4) Neuroimaging software packages do not address computational efficiency; and (5) Methods sections in journal articles are inadequate for reproducing results. To address these issues, we present Nipype (Neuroimaging in Python: Pipelines and Interfaces; http://nipy.org/nipype), an open-source, community-developed, software package, and scriptable library. Nipype solves the issues by providing Interfaces to existing neuroimaging software with uniform usage semantics and by facilitating interaction between these packages using Workflows. Nipype provides an environment that encourages interactive exploration of algorithms, eases the design of Workflows within and between packages, allows rapid comparative development of algorithms and reduces the learning curve necessary to use different packages. Nipype supports both local and remote execution on multi-core machines and clusters, without additional scripting. Nipype is Berkeley Software Distribution licensed, allowing anyone unrestricted usage. An open, community-driven development philosophy allows the software to quickly adapt and address the varied needs of the evolving neuroimaging community, especially in the context of increasing demand for reproducible research.

Nipype: A Flexible, Lightweight and Extensible Neuroimaging Data Processing Framework in Python

PubMed Central

Gorgolewski, Krzysztof; Burns, Christopher D.; Madison, Cindee; Clark, Dav; Halchenko, Yaroslav O.; Waskom, Michael L.; Ghosh, Satrajit S.

2011-01-01

Current neuroimaging software offer users an incredible opportunity to analyze their data in different ways, with different underlying assumptions. Several sophisticated software packages (e.g., AFNI, BrainVoyager, FSL, FreeSurfer, Nipy, R, SPM) are used to process and analyze large and often diverse (highly multi-dimensional) data. However, this heterogeneous collection of specialized applications creates several issues that hinder replicable, efficient, and optimal use of neuroimaging analysis approaches: (1) No uniform access to neuroimaging analysis software and usage information; (2) No framework for comparative algorithm development and dissemination; (3) Personnel turnover in laboratories often limits methodological continuity and training new personnel takes time; (4) Neuroimaging software packages do not address computational efficiency; and (5) Methods sections in journal articles are inadequate for reproducing results. To address these issues, we present Nipype (Neuroimaging in Python: Pipelines and Interfaces; http://nipy.org/nipype), an open-source, community-developed, software package, and scriptable library. Nipype solves the issues by providing Interfaces to existing neuroimaging software with uniform usage semantics and by facilitating interaction between these packages using Workflows. Nipype provides an environment that encourages interactive exploration of algorithms, eases the design of Workflows within and between packages, allows rapid comparative development of algorithms and reduces the learning curve necessary to use different packages. Nipype supports both local and remote execution on multi-core machines and clusters, without additional scripting. Nipype is Berkeley Software Distribution licensed, allowing anyone unrestricted usage. An open, community-driven development philosophy allows the software to quickly adapt and address the varied needs of the evolving neuroimaging community, especially in the context of increasing demand for reproducible research. PMID:21897815

The GLEaMviz computational tool, a publicly available software to explore realistic epidemic spreading scenarios at the global scale

PubMed Central

2011-01-01

Background Computational models play an increasingly important role in the assessment and control of public health crises, as demonstrated during the 2009 H1N1 influenza pandemic. Much research has been done in recent years in the development of sophisticated data-driven models for realistic computer-based simulations of infectious disease spreading. However, only a few computational tools are presently available for assessing scenarios, predicting epidemic evolutions, and managing health emergencies that can benefit a broad audience of users including policy makers and health institutions. Results We present "GLEaMviz", a publicly available software system that simulates the spread of emerging human-to-human infectious diseases across the world. The GLEaMviz tool comprises three components: the client application, the proxy middleware, and the simulation engine. The latter two components constitute the GLEaMviz server. The simulation engine leverages on the Global Epidemic and Mobility (GLEaM) framework, a stochastic computational scheme that integrates worldwide high-resolution demographic and mobility data to simulate disease spread on the global scale. The GLEaMviz design aims at maximizing flexibility in defining the disease compartmental model and configuring the simulation scenario; it allows the user to set a variety of parameters including: compartment-specific features, transition values, and environmental effects. The output is a dynamic map and a corresponding set of charts that quantitatively describe the geo-temporal evolution of the disease. The software is designed as a client-server system. The multi-platform client, which can be installed on the user's local machine, is used to set up simulations that will be executed on the server, thus avoiding specific requirements for large computational capabilities on the user side. Conclusions The user-friendly graphical interface of the GLEaMviz tool, along with its high level of detail and the realism of its embedded modeling approach, opens up the platform to simulate realistic epidemic scenarios. These features make the GLEaMviz computational tool a convenient teaching/training tool as well as a first step toward the development of a computational tool aimed at facilitating the use and exploitation of computational models for the policy making and scenario analysis of infectious disease outbreaks. PMID:21288355

Advancing botnet modeling techniques for military and security simulations

NASA Astrophysics Data System (ADS)

Banks, Sheila B.; Stytz, Martin R.

2011-06-01

Simulation environments serve many purposes, but they are only as good as their content. One of the most challenging and pressing areas that call for improved content is the simulation of bot armies (botnets) and their effects upon networks and computer systems. Botnets are a new type of malware, a type that is more powerful and potentially dangerous than any other type of malware. A botnet's power derives from several capabilities including the following: 1) the botnet's capability to be controlled and directed throughout all phases of its activity, 2) a command and control structure that grows increasingly sophisticated, and 3) the ability of a bot's software to be updated at any time by the owner of the bot (a person commonly called a bot master or bot herder.) Not only is a bot army powerful and agile in its technical capabilities, a bot army can be extremely large, can be comprised of tens of thousands, if not millions, of compromised computers or it can be as small as a few thousand targeted systems. In all botnets, their members can surreptitiously communicate with each other and their command and control centers. In sum, these capabilities allow a bot army to execute attacks that are technically sophisticated, difficult to trace, tactically agile, massive, and coordinated. To improve our understanding of their operation and potential, we believe that it is necessary to develop computer security simulations that accurately portray bot army activities, with the goal of including bot army simulations within military simulation environments. In this paper, we investigate issues that arise when simulating bot armies and propose a combination of the biologically inspired MSEIR infection spread model coupled with the jump-diffusion infection spread model to portray botnet propagation.

Application of foam-extend on turbulent fluid-structure interaction

NASA Astrophysics Data System (ADS)

Rege, K.; Hjertager, B. H.

2017-12-01

Turbulent flow around flexible structures is likely to induce structural vibrations which may eventually lead to fatigue failure. In order to assess the fatigue life of these structures, it is necessary to take the action of the flow on the structure into account, but also the influence of the vibrating structure on the fluid flow. This is achieved by performing fluid-structure interaction (FSI) simulations. In this work, we have investigated the capability of a FSI toolkit for the finite volume computational fluid dynamics software foam-extend to simulate turbulence-induced vibrations of a flexible structure. A large-eddy simulation (LES) turbulence model has been implemented to a basic FSI problem of a flexible wall which is placed in a confined, turbulent flow. This problem was simulated for 2.32 seconds. This short simulation required over 200 computation hours, using 20 processor cores. Thereby, it has been shown that the simulation of FSI with LES is possible, but also computationally demanding. In order to make turbulent FSI simulations with foam-extend more applicable, more sophisticated turbulence models and/or faster FSI iteration schemes should be applied.

Computerized Measurement of Negative Symptoms in Schizophrenia

PubMed Central

Cohen, Alex S.; Alpert, Murray; Nienow, Tasha M.; Dinzeo, Thomas J.; Docherty, Nancy M.

2008-01-01

Accurate measurement of negative symptoms is crucial for understanding and treating schizophrenia. However, current measurement strategies are reliant on subjective symptom rating scales which often have psychometric and practical limitations. Computerized analysis of patients’ speech offers a sophisticated and objective means of evaluating negative symptoms. The present study examined the feasibility and validity of using widely-available acoustic and lexical-analytic software to measure flat affect, alogia and anhedonia (via positive emotion). These measures were examined in their relationships to clinically-rated negative symptoms and social functioning. Natural speech samples were collected and analyzed for 14 patients with clinically-rated flat affect, 46 patients without flat affect and 19 healthy controls. The computer-based inflection and speech rate measures significantly discriminated patients with flat affect from controls, and the computer-based measure of alogia and negative emotion significantly discriminated the flat and non-flat patients. Both the computer and clinical measures of positive emotion/anhedonia corresponded to functioning impairments. The computerized method of assessing negative symptoms offered a number of advantages over the symptom scale-based approach. PMID:17920078

Using Ada: The deeper challenges

NASA Technical Reports Server (NTRS)

Feinberg, David A.

1986-01-01

The Ada programming language and the associated Ada Programming Support Environment (APSE) and Ada Run Time Environment (ARTE) provide the potential for significant life-cycle cost reductions in computer software development and maintenance activities. The Ada programming language itself is standardized, trademarked, and controlled via formal validation procedures. Though compilers are not yet production-ready as most would desire, the technology for constructing them is sufficiently well known and understood that time and money should suffice to correct current deficiencies. The APSE and ARTE are, on the other hand, significantly newer issues within most software development and maintenance efforts. Currently, APSE and ARTE are highly dependent on differing implementer concepts, strategies, and market objectives. Complex and sophisticated mission-critical computing systems require the use of a complete Ada-based capability, not just the programming language itself; yet the range of APSE and ARTE features which must actually be utilized can vary significantly from one system to another. As a consequence, the need to understand, objectively evaluate, and select differing APSE and ARTE capabilities and features is critical to the effective use of Ada and the life-cycle efficiencies it is intended to promote. It is the selection, collection, and understanding of APSE and ARTE which provide the deeper challenges of using Ada for real-life mission-critical computing systems. Some of the current issues which must be clarified, often on a case-by-case basis, in order to successfully realize the full capabilities of Ada are discussed.

Proceedings Second Annual Cyber Security and Information Infrastructure Research Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheldon, Frederick T; Krings, Axel; Yoo, Seong-Moo

2006-01-01

The workshop theme is Cyber Security: Beyond the Maginot Line Recently the FBI reported that computer crime has skyrocketed costing over $67 billion in 2005 alone and affecting 2.8M+ businesses and organizations. Attack sophistication is unprecedented along with availability of open source concomitant tools. Private, academic, and public sectors invest significant resources in cyber security. Industry primarily performs cyber security research as an investment in future products and services. While the public sector also funds cyber security R&D, the majority of this activity focuses on the specific mission(s) of the funding agency. Thus, broad areas of cyber security remain neglectedmore » or underdeveloped. Consequently, this workshop endeavors to explore issues involving cyber security and related technologies toward strengthening such areas and enabling the development of new tools and methods for securing our information infrastructure critical assets. We aim to assemble new ideas and proposals about robust models on which we can build the architecture of a secure cyberspace including but not limited to: * Knowledge discovery and management * Critical infrastructure protection * De-obfuscating tools for the validation and verification of tamper-proofed software * Computer network defense technologies * Scalable information assurance strategies * Assessment-driven design for trust * Security metrics and testing methodologies * Validation of security and survivability properties * Threat assessment and risk analysis * Early accurate detection of the insider threat * Security hardened sensor networks and ubiquitous computing environments * Mobile software authentication protocols * A new "model" of the threat to replace the "Maginot Line" model and more . . .« less

Architecture for autonomy

NASA Astrophysics Data System (ADS)

Broten, Gregory S.; Monckton, Simon P.; Collier, Jack; Giesbrecht, Jared

2006-05-01

In 2002 Defence R&D Canada changed research direction from pure tele-operated land vehicles to general autonomy for land, air, and sea craft. The unique constraints of the military environment coupled with the complexity of autonomous systems drove DRDC to carefully plan a research and development infrastructure that would provide state of the art tools without restricting research scope. DRDC's long term objectives for its autonomy program address disparate unmanned ground vehicle (UGV), unattended ground sensor (UGS), air (UAV), and subsea and surface (UUV and USV) vehicles operating together with minimal human oversight. Individually, these systems will range in complexity from simple reconnaissance mini-UAVs streaming video to sophisticated autonomous combat UGVs exploiting embedded and remote sensing. Together, these systems can provide low risk, long endurance, battlefield services assuming they can communicate and cooperate with manned and unmanned systems. A key enabling technology for this new research is a software architecture capable of meeting both DRDC's current and future requirements. DRDC built upon recent advances in the computing science field while developing its software architecture know as the Architecture for Autonomy (AFA). Although a well established practice in computing science, frameworks have only recently entered common use by unmanned vehicles. For industry and government, the complexity, cost, and time to re-implement stable systems often exceeds the perceived benefits of adopting a modern software infrastructure. Thus, most persevere with legacy software, adapting and modifying software when and wherever possible or necessary -- adopting strategic software frameworks only when no justifiable legacy exists. Conversely, academic programs with short one or two year projects frequently exploit strategic software frameworks but with little enduring impact. The open-source movement radically changes this picture. Academic frameworks, open to public scrutiny and modification, now rival commercial frameworks in both quality and economic impact. Further, industry now realizes that open source frameworks can reduce cost and risk of systems engineering. This paper describes the Architecture for Autonomy implemented by DRDC and how this architecture meets DRDC's current needs. It also presents an argument for why this architecture should also satisfy DRDC's future requirements as well.

Chemical Education from Programs for Learning, Inc.

ERIC Educational Resources Information Center

Petrich, James A.

1981-01-01

This software review focuses on five concept-related packages of programs in the Apple version and are viewed as well-written in terms of both educational sophistication and programing expertise. (MP)

SIGKit: a New Data-based Software for Learning Introductory Geophysics

NASA Astrophysics Data System (ADS)

Zhang, Y.; Kruse, S.; George, O.; Esmaeili, S.; Papadimitrios, K. S.; Bank, C. G.; Cadmus, A.; Kenneally, N.; Patton, K.; Brusher, J.

2016-12-01

Students of diverse academic backgrounds take introductory geophysics courses to learn the theory of a variety of measurement and analysis methods with the expectation to be able to apply their basic knowledge to real data. Ideally, such data is collected in field courses and also used in lecture-based courses because they provide a critical context for better learning and understanding of geophysical methods. Each method requires a separate software package for the data processing steps, and the complexity and variety of professional software makes the path through data processing to data interpretation a strenuous learning process for students and a challenging teaching task for instructors. SIGKit (Student Investigation of Geophysics Toolkit) being developed as a collaboration between the University of South Florida, the University of Toronto, and MathWorks intends to address these shortcomings by showing the most essential processing steps and allowing students to visualize the underlying physics of the various methods. It is based on MATLAB software and offered as an easy-to-use graphical user interface and packaged so it can run as an executable in the classroom and the field even on computers without MATLAB licenses. An evaluation of the software based on student feedback from focus-group interviews and think-aloud observations helps drive its development and refinement. The toolkit provides a logical gateway into the more sophisticated and costly software students will encounter later in their training and careers by combining essential visualization, modeling, processing, and analysis steps for seismic, GPR, magnetics, gravity, resistivity, and electromagnetic data.

Intelligent Systems and Advanced User Interfaces for Design, Operation, and Maintenance of Command Management Systems

NASA Technical Reports Server (NTRS)

Mitchell, Christine M.

1998-01-01

Historically Command Management Systems (CMS) have been large, expensive, spacecraft-specific software systems that were costly to build, operate, and maintain. Current and emerging hardware, software, and user interface technologies may offer an opportunity to facilitate the initial formulation and design of a spacecraft-specific CMS as well as a to develop a more generic or a set of core components for CMS systems. Current MOC (mission operations center) hardware and software include Unix workstations, the C/C++ and Java programming languages, and X and Java window interfaces representations. This configuration provides the power and flexibility to support sophisticated systems and intelligent user interfaces that exploit state-of-the-art technologies in human-machine systems engineering, decision making, artificial intelligence, and software engineering. One of the goals of this research is to explore the extent to which technologies developed in the research laboratory can be productively applied in a complex system such as spacecraft command management. Initial examination of some of the issues in CMS design and operation suggests that application of technologies such as intelligent planning, case-based reasoning, design and analysis tools from a human-machine systems engineering point of view (e.g., operator and designer models) and human-computer interaction tools, (e.g., graphics, visualization, and animation), may provide significant savings in the design, operation, and maintenance of a spacecraft-specific CMS as well as continuity for CMS design and development across spacecraft with varying needs. The savings in this case is in software reuse at all stages of the software engineering process.

2016 KIVA-hpFE Development: A Robust and Accurate Engine Modeling Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carrington, David Bradley; Waters, Jiajia

Los Alamos National Laboratory and its collaborators are facilitating engine modeling by improving accuracy and robustness of the modeling, and improving the robustness of software. We also continue to improve the physical modeling methods. We are developing and implementing new mathematical algorithms, those that represent the physics within an engine. We provide software that others may use directly or that they may alter with various models e.g., sophisticated chemical kinetics, different turbulent closure methods or other fuel injection and spray systems.

Lockheed L-1011 TriStar first flight to support Adaptive Performance Optimization study

NASA Technical Reports Server (NTRS)

1997-01-01

Bearing the logos of the National Aeronautics and Space Administration and Orbital Sciences Corporation, Orbital's L-1011 Tristar lifts off the Meadows Field Runway at Bakersfield, California, on its first flight May 21, 1997, in NASA's Adaptive Performance Optimization project. Developed by engineers at NASA's Dryden Flight Research Center, Edwards, California, the experiment seeks to reduce fuel consumption of large jetliners by improving the aerodynamic efficency of their wings at cruise conditions. A research computer employing a sophisticated software program adapts to changing flight conditions by commanding small movements of the L-1011's outboard ailerons to give the wings the most efficient - or optimal - airfoil. Up to a dozen research flights will be flown in the current and follow-on phases of the project over the next couple years.

Multi-core and GPU accelerated simulation of a radial star target imaged with equivalent t-number circular and Gaussian pupils

NASA Astrophysics Data System (ADS)

Greynolds, Alan W.

2013-09-01

Results from the GelOE optical engineering software are presented for the through-focus, monochromatic coherent and polychromatic incoherent imaging of a radial "star" target for equivalent t-number circular and Gaussian pupils. The FFT-based simulations are carried out using OpenMP threading on a multi-core desktop computer, with and without the aid of a many-core NVIDIA GPU accessing its cuFFT library. It is found that a custom FFT optimized for the 12-core host has similar performance to a simply implemented 256-core GPU FFT. A more sophisticated version of the latter but tuned to reduce overhead on a 448-core GPU is 20 to 28 times faster than a basic FFT implementation running on one CPU core.

Personal privacy, information assurance, and the threat posed by malware techology

NASA Astrophysics Data System (ADS)

Stytz, Martin R.; Banks, Sheila B.

2006-04-01

In spite of our best efforts to secure the cyber world, the threats posed to personal privacy by attacks upon networks and software continue unabated. While there are many reasons for this state of affairs, clearly one of the reasons for continued vulnerabilities in software is the inability to assess their security properties and test their security systems while they are in development. A second reason for this growing threat to personal privacy is the growing sophistication and maliciousness of malware coupled with the increasing difficulty of detecting malware. The pervasive threat posed by malware coupled with the difficulties faced when trying to detect its presence or an attempted intrusion make addressing the malware threat one of the most pressing issues that must be solved in order to insure personal privacy to users of the internet. In this paper, we will discuss the threat posed by malware, the types of malware found in the wild (outside of computer laboratories), and current techniques that are available for from a successful malware penetration. The paper includes a discussion of anti-malware tools and suggestions for future anti-malware efforts.

Inferring population history with DIY ABC: a user-friendly approach to approximate Bayesian computation

PubMed Central

Cornuet, Jean-Marie; Santos, Filipe; Beaumont, Mark A.; Robert, Christian P.; Marin, Jean-Michel; Balding, David J.; Guillemaud, Thomas; Estoup, Arnaud

2008-01-01

Summary: Genetic data obtained on population samples convey information about their evolutionary history. Inference methods can extract part of this information but they require sophisticated statistical techniques that have been made available to the biologist community (through computer programs) only for simple and standard situations typically involving a small number of samples. We propose here a computer program (DIY ABC) for inference based on approximate Bayesian computation (ABC), in which scenarios can be customized by the user to fit many complex situations involving any number of populations and samples. Such scenarios involve any combination of population divergences, admixtures and population size changes. DIY ABC can be used to compare competing scenarios, estimate parameters for one or more scenarios and compute bias and precision measures for a given scenario and known values of parameters (the current version applies to unlinked microsatellite data). This article describes key methods used in the program and provides its main features. The analysis of one simulated and one real dataset, both with complex evolutionary scenarios, illustrates the main possibilities of DIY ABC. Availability: The software DIY ABC is freely available at http://www.montpellier.inra.fr/CBGP/diyabc. Contact: j.cornuet@imperial.ac.uk Supplementary information: Supplementary data are also available at http://www.montpellier.inra.fr/CBGP/diyabc PMID:18842597

Interactive Visualization and Analysis of Geospatial Data Sets - TrikeND-iGlobe

NASA Astrophysics Data System (ADS)

Rosebrock, Uwe; Hogan, Patrick; Chandola, Varun

2013-04-01

The visualization of scientific datasets is becoming an ever-increasing challenge as advances in computing technologies have enabled scientists to build high resolution climate models that have produced petabytes of climate data. To interrogate and analyze these large datasets in real-time is a task that pushes the boundaries of computing hardware and software. But integration of climate datasets with geospatial data requires considerable amount of effort and close familiarity of various data formats and projection systems, which has prevented widespread utilization outside of climate community. TrikeND-iGlobe is a sophisticated software tool that bridges this gap, allows easy integration of climate datasets with geospatial datasets and provides sophisticated visualization and analysis capabilities. The objective for TrikeND-iGlobe is the continued building of an open source 4D virtual globe application using NASA World Wind technology that integrates analysis of climate model outputs with remote sensing observations as well as demographic and environmental data sets. This will facilitate a better understanding of global and regional phenomenon, and the impact analysis of climate extreme events. The critical aim is real-time interactive interrogation. At the data centric level the primary aim is to enable the user to interact with the data in real-time for the purpose of analysis - locally or remotely. TrikeND-iGlobe provides the basis for the incorporation of modular tools that provide extended interactions with the data, including sub-setting, aggregation, re-shaping, time series analysis methods and animation to produce publication-quality imagery. TrikeND-iGlobe may be run locally or can be accessed via a web interface supported by high-performance visualization compute nodes placed close to the data. It supports visualizing heterogeneous data formats: traditional geospatial datasets along with scientific data sets with geographic coordinates (NetCDF, HDF, etc.). It also supports multiple data access mechanisms, including HTTP, FTP, WMS, WCS, and Thredds Data Server (for NetCDF data and for scientific data, TrikeND-iGlobe supports various visualization capabilities, including animations, vector field visualization, etc. TrikeND-iGlobe is a collaborative open-source project, contributors include NASA (ARC-PX), ORNL (Oakridge National Laboratories), Unidata, Kansas University, CSIRO CMAR Australia and Geoscience Australia.

Missile signal processing common computer architecture for rapid technology upgrade

NASA Astrophysics Data System (ADS)

Rabinkin, Daniel V.; Rutledge, Edward; Monticciolo, Paul

2004-10-01

Interceptor missiles process IR images to locate an intended target and guide the interceptor towards it. Signal processing requirements have increased as the sensor bandwidth increases and interceptors operate against more sophisticated targets. A typical interceptor signal processing chain is comprised of two parts. Front-end video processing operates on all pixels of the image and performs such operations as non-uniformity correction (NUC), image stabilization, frame integration and detection. Back-end target processing, which tracks and classifies targets detected in the image, performs such algorithms as Kalman tracking, spectral feature extraction and target discrimination. In the past, video processing was implemented using ASIC components or FPGAs because computation requirements exceeded the throughput of general-purpose processors. Target processing was performed using hybrid architectures that included ASICs, DSPs and general-purpose processors. The resulting systems tended to be function-specific, and required custom software development. They were developed using non-integrated toolsets and test equipment was developed along with the processor platform. The lifespan of a system utilizing the signal processing platform often spans decades, while the specialized nature of processor hardware and software makes it difficult and costly to upgrade. As a result, the signal processing systems often run on outdated technology, algorithms are difficult to update, and system effectiveness is impaired by the inability to rapidly respond to new threats. A new design approach is made possible three developments; Moore's Law - driven improvement in computational throughput; a newly introduced vector computing capability in general purpose processors; and a modern set of open interface software standards. Today's multiprocessor commercial-off-the-shelf (COTS) platforms have sufficient throughput to support interceptor signal processing requirements. This application may be programmed under existing real-time operating systems using parallel processing software libraries, resulting in highly portable code that can be rapidly migrated to new platforms as processor technology evolves. Use of standardized development tools and 3rd party software upgrades are enabled as well as rapid upgrade of processing components as improved algorithms are developed. The resulting weapon system will have a superior processing capability over a custom approach at the time of deployment as a result of a shorter development cycles and use of newer technology. The signal processing computer may be upgraded over the lifecycle of the weapon system, and can migrate between weapon system variants enabled by modification simplicity. This paper presents a reference design using the new approach that utilizes an Altivec PowerPC parallel COTS platform. It uses a VxWorks-based real-time operating system (RTOS), and application code developed using an efficient parallel vector library (PVL). A quantification of computing requirements and demonstration of interceptor algorithm operating on this real-time platform are provided.

Effective Materials Property Information Management for the 21st Century

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Weiju; Cebon, David; Barabash, Oleg M

2011-01-01

This paper discusses key principles for the development of materials property information management software systems. There are growing needs for automated materials information management in various organizations. In part these are fuelled by the demands for higher efficiency in material testing, product design and engineering analysis. But equally important, organizations are being driven by the needs for consistency, quality and traceability of data, as well as control of access to proprietary or sensitive information. Further, the use of increasingly sophisticated nonlinear, anisotropic and multi-scale engineering analyses requires both processing of large volumes of test data for development of constitutive modelsmore » and complex materials data input for Computer-Aided Engineering (CAE) software. And finally, the globalization of economy often generates great needs for sharing a single gold source of materials information between members of global engineering teams in extended supply-chains. Fortunately material property management systems have kept pace with the growing user demands and evolved to versatile data management systems that can be customized to specific user needs. The more sophisticated of these provide facilities for: (i) data management functions such as access, version, and quality controls; (ii) a wide range of data import, export and analysis capabilities; (iii) data pedigree traceability mechanisms; (iv) data searching, reporting and viewing tools; and (v) access to the information via a wide range of interfaces. In this paper the important requirements for advanced material data management systems, future challenges and opportunities such as automated error checking, data quality characterization, identification of gaps in datasets, as well as functionalities and business models to fuel database growth and maintenance are discussed.« less

RAVEN: a GUI and an Artificial Intelligence Engine in a Dynamic PRA Framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

C. Rabiti; D. Mandelli; A. Alfonsi

Increases in computational power and pressure for more accurate simulations and estimations of accident scenario consequences are driving the need for Dynamic Probabilistic Risk Assessment (PRA) [1] of very complex models. While more sophisticated algorithms and computational power address the back end of this challenge, the front end is still handled by engineers that need to extract meaningful information from the large amount of data and build these complex models. Compounding this problem is the difficulty in knowledge transfer and retention, and the increasing speed of software development. The above-described issues would have negatively impacted deployment of the new highmore » fidelity plant simulator RELAP-7 (Reactor Excursion and Leak Analysis Program) at Idaho National Laboratory. Therefore, RAVEN that was initially focused to be the plant controller for RELAP-7 will help mitigate future RELAP-7 software engineering risks. In order to accomplish this task, Reactor Analysis and Virtual Control Environment (RAVEN) has been designed to provide an easy to use Graphical User Interface (GUI) for building plant models and to leverage artificial intelligence algorithms in order to reduce computational time, improve results, and help the user to identify the behavioral pattern of the Nuclear Power Plants (NPPs). In this paper we will present the GUI implementation and its current capability status. We will also introduce the support vector machine algorithms and show our evaluation of their potentiality in increasing the accuracy and reducing the computational costs of PRA analysis. In this evaluation we will refer to preliminary studies performed under the Risk Informed Safety Margins Characterization (RISMC) project of the Light Water Reactors Sustainability (LWRS) campaign [3]. RISMC simulation needs and algorithm testing are currently used as a guidance to prioritize RAVEN developments relevant to PRA.« less

Development and application of GIS-based PRISM integration through a plugin approach

NASA Astrophysics Data System (ADS)

Lee, Woo-Seop; Chun, Jong Ahn; Kang, Kwangmin

2014-05-01

A PRISM (Parameter-elevation Regressions on Independent Slopes Model) QGIS-plugin was developed on Quantum GIS platform in this study. This Quantum GIS plugin system provides user-friendly graphic user interfaces (GUIs) so that users can obtain gridded meteorological data of high resolutions (1 km × 1 km). Also, this software is designed to run on a personal computer so that it does not require an internet access or a sophisticated computer system. This module is a user-friendly system that a user can generate PRISM data with ease. The proposed PRISM QGIS-plugin is a hybrid statistical-geographic model system that uses coarse resolution datasets (APHRODITE datasets in this study) with digital elevation data to generate the fine-resolution gridded precipitation. To validate the performance of the software, Prek Thnot River Basin in Kandal, Cambodia is selected for application. Overall statistical analysis shows promising outputs generated by the proposed plugin. Error measures such as RMSE (Root Mean Square Error) and MAPE (Mean Absolute Percentage Error) were used to evaluate the performance of the developed PRISM QGIS-plugin. Evaluation results using RMSE and MAPE were 2.76 mm and 4.2%, respectively. This study suggested that the plugin can be used to generate high resolution precipitation datasets for hydrological and climatological studies at a watershed where observed weather datasets are limited.

The Computer-based Health Evaluation Software (CHES): a software for electronic patient-reported outcome monitoring.

PubMed

Holzner, Bernhard; Giesinger, Johannes M; Pinggera, Jakob; Zugal, Stefan; Schöpf, Felix; Oberguggenberger, Anne S; Gamper, Eva M; Zabernigg, August; Weber, Barbara; Rumpold, Gerhard

2012-11-09

Patient-reported Outcomes (PROs) capturing e.g., quality of life, fatigue, depression, medication side-effects or disease symptoms, have become important outcome parameters in medical research and daily clinical practice. Electronic PRO data capture (ePRO) with software packages to administer questionnaires, storing data, and presenting results has facilitated PRO assessment in hospital settings. Compared to conventional paper-pencil versions of PRO instruments, ePRO is more economical with regard to staff resources and time, and allows immediate presentation of results to the medical staff.The objective of our project was to develop software (CHES - Computer-based Health Evaluation System) for ePRO in hospital settings and at home with a special focus on the presentation of individual patient's results. Following the Extreme Programming development approach architecture was not fixed up-front, but was done in close, continuous collaboration with software end users (medical staff, researchers and patients) to meet their specific demands. Developed features include sophisticated, longitudinal charts linking patients' PRO data to clinical characteristics and to PRO scores from reference populations, a web-interface for questionnaire administration, and a tool for convenient creating and editing of questionnaires. By 2012 CHES has been implemented at various institutions in Austria, Germany, Switzerland, and the UK and about 5000 patients participated in ePRO (with around 15000 assessments in total). Data entry is done by the patients themselves via tablet PCs with a study nurse or an intern approaching patients and supervising questionnaire completion. During the last decade several software packages for ePRO have emerged for different purposes. Whereas commercial products are available primarily for ePRO in clinical trials, academic projects have focused on data collection and presentation in daily clinical practice and on extending cancer registries with PRO data. CHES includes several features facilitating the use of PRO data for individualized medical decision making. With its web-interface it allows ePRO also when patients are home. Thus, it provides complete monitoring of patients'physical and psychosocial symptom burden.

The Computer-based Health Evaluation Software (CHES): a software for electronic patient-reported outcome monitoring

PubMed Central

2012-01-01

Background Patient-reported Outcomes (PROs) capturing e.g., quality of life, fatigue, depression, medication side-effects or disease symptoms, have become important outcome parameters in medical research and daily clinical practice. Electronic PRO data capture (ePRO) with software packages to administer questionnaires, storing data, and presenting results has facilitated PRO assessment in hospital settings. Compared to conventional paper-pencil versions of PRO instruments, ePRO is more economical with regard to staff resources and time, and allows immediate presentation of results to the medical staff. The objective of our project was to develop software (CHES – Computer-based Health Evaluation System) for ePRO in hospital settings and at home with a special focus on the presentation of individual patient’s results. Methods Following the Extreme Programming development approach architecture was not fixed up-front, but was done in close, continuous collaboration with software end users (medical staff, researchers and patients) to meet their specific demands. Developed features include sophisticated, longitudinal charts linking patients’ PRO data to clinical characteristics and to PRO scores from reference populations, a web-interface for questionnaire administration, and a tool for convenient creating and editing of questionnaires. Results By 2012 CHES has been implemented at various institutions in Austria, Germany, Switzerland, and the UK and about 5000 patients participated in ePRO (with around 15000 assessments in total). Data entry is done by the patients themselves via tablet PCs with a study nurse or an intern approaching patients and supervising questionnaire completion. Discussion During the last decade several software packages for ePRO have emerged for different purposes. Whereas commercial products are available primarily for ePRO in clinical trials, academic projects have focused on data collection and presentation in daily clinical practice and on extending cancer registries with PRO data. CHES includes several features facilitating the use of PRO data for individualized medical decision making. With its web-interface it allows ePRO also when patients are home. Thus, it provides complete monitoring of patients‘physical and psychosocial symptom burden. PMID:23140270

Description of the GMAO OSSE for Weather Analysis Software Package: Version 3

NASA Technical Reports Server (NTRS)

Koster, Randal D. (Editor); Errico, Ronald M.; Prive, Nikki C.; Carvalho, David; Sienkiewicz, Meta; El Akkraoui, Amal; Guo, Jing; Todling, Ricardo; McCarty, Will; Putman, William M.;

Autonomous robot software development using simple software components

NASA Astrophysics Data System (ADS)

Burke, Thomas M.; Chung, Chan-Jin

2004-10-01

Developing software to control a sophisticated lane-following, obstacle-avoiding, autonomous robot can be demanding and beyond the capabilities of novice programmers - but it doesn"t have to be. A creative software design utilizing only basic image processing and a little algebra, has been employed to control the LTU-AISSIG autonomous robot - a contestant in the 2004 Intelligent Ground Vehicle Competition (IGVC). This paper presents a software design equivalent to that used during the IGVC, but with much of the complexity removed. The result is an autonomous robot software design, that is robust, reliable, and can be implemented by programmers with a limited understanding of image processing. This design provides a solid basis for further work in autonomous robot software, as well as an interesting and achievable robotics project for students.

Cyber-workstation for computational neuroscience.

PubMed

Digiovanna, Jack; Rattanatamrong, Prapaporn; Zhao, Ming; Mahmoudi, Babak; Hermer, Linda; Figueiredo, Renato; Principe, Jose C; Fortes, Jose; Sanchez, Justin C

2010-01-01

A Cyber-Workstation (CW) to study in vivo, real-time interactions between computational models and large-scale brain subsystems during behavioral experiments has been designed and implemented. The design philosophy seeks to directly link the in vivo neurophysiology laboratory with scalable computing resources to enable more sophisticated computational neuroscience investigation. The architecture designed here allows scientists to develop new models and integrate them with existing models (e.g. recursive least-squares regressor) by specifying appropriate connections in a block-diagram. Then, adaptive middleware transparently implements these user specifications using the full power of remote grid-computing hardware. In effect, the middleware deploys an on-demand and flexible neuroscience research test-bed to provide the neurophysiology laboratory extensive computational power from an outside source. The CW consolidates distributed software and hardware resources to support time-critical and/or resource-demanding computing during data collection from behaving animals. This power and flexibility is important as experimental and theoretical neuroscience evolves based on insights gained from data-intensive experiments, new technologies and engineering methodologies. This paper describes briefly the computational infrastructure and its most relevant components. Each component is discussed within a systematic process of setting up an in vivo, neuroscience experiment. Furthermore, a co-adaptive brain machine interface is implemented on the CW to illustrate how this integrated computational and experimental platform can be used to study systems neurophysiology and learning in a behavior task. We believe this implementation is also the first remote execution and adaptation of a brain-machine interface.

Galaxy CloudMan: delivering cloud compute clusters.

PubMed

Afgan, Enis; Baker, Dannon; Coraor, Nate; Chapman, Brad; Nekrutenko, Anton; Taylor, James

2010-12-21

Widespread adoption of high-throughput sequencing has greatly increased the scale and sophistication of computational infrastructure needed to perform genomic research. An alternative to building and maintaining local infrastructure is "cloud computing", which, in principle, offers on demand access to flexible computational infrastructure. However, cloud computing resources are not yet suitable for immediate "as is" use by experimental biologists. We present a cloud resource management system that makes it possible for individual researchers to compose and control an arbitrarily sized compute cluster on Amazon's EC2 cloud infrastructure without any informatics requirements. Within this system, an entire suite of biological tools packaged by the NERC Bio-Linux team (http://nebc.nerc.ac.uk/tools/bio-linux) is available for immediate consumption. The provided solution makes it possible, using only a web browser, to create a completely configured compute cluster ready to perform analysis in less than five minutes. Moreover, we provide an automated method for building custom deployments of cloud resources. This approach promotes reproducibility of results and, if desired, allows individuals and labs to add or customize an otherwise available cloud system to better meet their needs. The expected knowledge and associated effort with deploying a compute cluster in the Amazon EC2 cloud is not trivial. The solution presented in this paper eliminates these barriers, making it possible for researchers to deploy exactly the amount of computing power they need, combined with a wealth of existing analysis software, to handle the ongoing data deluge.

Cyber-Workstation for Computational Neuroscience

PubMed Central

DiGiovanna, Jack; Rattanatamrong, Prapaporn; Zhao, Ming; Mahmoudi, Babak; Hermer, Linda; Figueiredo, Renato; Principe, Jose C.; Fortes, Jose; Sanchez, Justin C.

2009-01-01

A Cyber-Workstation (CW) to study in vivo, real-time interactions between computational models and large-scale brain subsystems during behavioral experiments has been designed and implemented. The design philosophy seeks to directly link the in vivo neurophysiology laboratory with scalable computing resources to enable more sophisticated computational neuroscience investigation. The architecture designed here allows scientists to develop new models and integrate them with existing models (e.g. recursive least-squares regressor) by specifying appropriate connections in a block-diagram. Then, adaptive middleware transparently implements these user specifications using the full power of remote grid-computing hardware. In effect, the middleware deploys an on-demand and flexible neuroscience research test-bed to provide the neurophysiology laboratory extensive computational power from an outside source. The CW consolidates distributed software and hardware resources to support time-critical and/or resource-demanding computing during data collection from behaving animals. This power and flexibility is important as experimental and theoretical neuroscience evolves based on insights gained from data-intensive experiments, new technologies and engineering methodologies. This paper describes briefly the computational infrastructure and its most relevant components. Each component is discussed within a systematic process of setting up an in vivo, neuroscience experiment. Furthermore, a co-adaptive brain machine interface is implemented on the CW to illustrate how this integrated computational and experimental platform can be used to study systems neurophysiology and learning in a behavior task. We believe this implementation is also the first remote execution and adaptation of a brain-machine interface. PMID:20126436

An Integrated Research Program for the Modeling, Analysis and Control of Aerospace Systems

DTIC Science & Technology

1992-03-03

Fabiano, Jr. - Brown University Mitchell Feigenbaum - Rockefeller University Elena Fernandez - Institudo de Desarrollo Techologico, para la Industria...system. The system runs under DEC Ultrix; we have installed the GKS graphics system and language compilers (FORTRAN and C). The DELIGHT.MIMO software ...which links a sophisticated non-smooth optimization package to some linear system software , is on the system. The package was kindly furnished by

An Integrated Research Program for the Modeling, Analysis and Control of Aerospace Systems

DTIC Science & Technology

1992-03-03

Mitchell Feigenbaum - Rockefeller University Elena Fernandez - Institudo de Desarrollo Techologico, para la Industria Quimica Wilfred M. Greenlee...Ultrix; we have installed the GKS graphics system and language compilers (FORTRAN and C). The DELIGHT.MIMO software , which links a sophisticated non...smooth optimization package to some linear system software , is on the system. The package was kindly furnished by Professor E. Polak, Electrical and

Intelligent and Adaptive Interface (IAI) for Cognitive Cockpit (CC)

DTIC Science & Technology

2004-03-31

goals3 and plans and generating system plans would be incorporated as task knowledge. The Dialogue Model, which is currently undeveloped in LOCATE...pieces of software. Modularity can also serve to improve the organisational effectiveness of software, whereby a suitable division of labour among...a sophisticated tool in support of future combat aircraft acquisition. While CA can monitor similar activities in countries like the UK and USA we

48 CFR 227.7203-15 - Subcontractor rights in computer software or computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... computer software or computer software documentation. 227.7203-15 Section 227.7203-15 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-15 Subcontractor rights in computer software or computer software documentation. (a...

48 CFR 227.7203-15 - Subcontractor rights in computer software or computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... computer software or computer software documentation. 227.7203-15 Section 227.7203-15 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-15 Subcontractor rights in computer software or computer software documentation. (a...

48 CFR 227.7203-15 - Subcontractor rights in computer software or computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... computer software or computer software documentation. 227.7203-15 Section 227.7203-15 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-15 Subcontractor rights in computer software or computer software documentation. (a...

48 CFR 227.7203-15 - Subcontractor rights in computer software or computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... computer software or computer software documentation. 227.7203-15 Section 227.7203-15 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-15 Subcontractor rights in computer software or computer software documentation. (a...

48 CFR 227.7203-15 - Subcontractor rights in computer software or computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... computer software or computer software documentation. 227.7203-15 Section 227.7203-15 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-15 Subcontractor rights in computer software or computer software documentation. (a...

The impact of using computer decision-support software in primary care nurse-led telephone triage: interactional dilemmas and conversational consequences.

PubMed

Murdoch, Jamie; Barnes, Rebecca; Pooler, Jillian; Lattimer, Valerie; Fletcher, Emily; Campbell, John L

2015-02-01

Telephone triage represents one strategy to manage demand for face-to-face GP appointments in primary care. Although computer decision-support software (CDSS) is increasingly used by nurses to triage patients, little is understood about how interaction is organized in this setting. Specifically any interactional dilemmas this computer-mediated setting invokes; and how these may be consequential for communication with patients. Using conversation analytic methods we undertook a multi-modal analysis of 22 audio-recorded telephone triage nurse-caller interactions from one GP practice in England, including 10 video-recordings of nurses' use of CDSS during triage. We draw on Goffman's theoretical notion of participation frameworks to make sense of these interactions, presenting 'telling cases' of interactional dilemmas nurses faced in meeting patient's needs and accurately documenting the patient's condition within the CDSS. Our findings highlight troubles in the 'interactional workability' of telephone triage exposing difficulties faced in aligning the proximal and wider distal context that structures CDSS-mediated interactions. Patients present with diverse symptoms, understanding of triage consultations, and communication skills which nurses need to negotiate turn-by-turn with CDSS requirements. Nurses therefore need to have sophisticated communication, technological and clinical skills to ensure patients' presenting problems are accurately captured within the CDSS to determine safe triage outcomes. Dilemmas around how nurses manage and record information, and the issues of professional accountability that may ensue, raise questions about the impact of CDSS and its use in supporting nurses to deliver safe and effective patient care. Copyright © 2014 Elsevier Ltd. All rights reserved.

48 CFR 227.7202 - Commercial computer software and commercial computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... software and commercial computer software documentation. 227.7202 Section 227.7202 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202 Commercial computer software and commercial computer software documentation. ...

48 CFR 227.7203 - Noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... software and noncommercial computer software documentation. 227.7203 Section 227.7203 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203 Noncommercial computer software and noncommercial computer software documentation. ...

48 CFR 227.7203 - Noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... software and noncommercial computer software documentation. 227.7203 Section 227.7203 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203 Noncommercial computer software and noncommercial computer software documentation. ...

48 CFR 227.7203 - Noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... software and noncommercial computer software documentation. 227.7203 Section 227.7203 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203 Noncommercial computer software and noncommercial computer software documentation. ...

48 CFR 227.7202 - Commercial computer software and commercial computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... software and commercial computer software documentation. 227.7202 Section 227.7202 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202 Commercial computer software and commercial computer software documentation. ...

48 CFR 227.7203 - Noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... software and noncommercial computer software documentation. 227.7203 Section 227.7203 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203 Noncommercial computer software and noncommercial computer software documentation. ...

48 CFR 227.7202 - Commercial computer software and commercial computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... software and commercial computer software documentation. 227.7202 Section 227.7202 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202 Commercial computer software and commercial computer software documentation. ...

48 CFR 227.7202 - Commercial computer software and commercial computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... software and commercial computer software documentation. 227.7202 Section 227.7202 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202 Commercial computer software and commercial computer software documentation. ...

48 CFR 227.7202 - Commercial computer software and commercial computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... software and commercial computer software documentation. 227.7202 Section 227.7202 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202 Commercial computer software and commercial computer software documentation. ...

48 CFR 227.7203 - Noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... software and noncommercial computer software documentation. 227.7203 Section 227.7203 Federal Acquisition... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203 Noncommercial computer software and noncommercial computer software documentation. ...

The evolution of CMS software performance studies

NASA Astrophysics Data System (ADS)

Kortelainen, M. J.; Elmer, P.; Eulisse, G.; Innocente, V.; Jones, C. D.; Tuura, L.

2011-12-01

CMS has had an ongoing and dedicated effort to optimize software performance for several years. Initially this effort focused primarily on the cleanup of many issues coming from basic C++ errors, namely reducing dynamic memory churn, unnecessary copies/temporaries and tools to routinely monitor these things. Over the past 1.5 years, however, the transition to 64bit, newer versions of the gcc compiler, newer tools and the enabling of techniques like vectorization have made possible more sophisticated improvements to the software performance. This presentation will cover this evolution and describe the current avenues being pursued for software performance, as well as the corresponding gains.

48 CFR 227.7202-3 - Rights in commercial computer software or commercial computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... computer software or commercial computer software documentation. 227.7202-3 Section 227.7202-3 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-3 Rights in commercial computer software or commercial computer software documentation...

48 CFR 227.7202-3 - Rights in commercial computer software or commercial computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... computer software or commercial computer software documentation. 227.7202-3 Section 227.7202-3 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-3 Rights in commercial computer software or commercial computer software documentation...

48 CFR 227.7203-2 - Acquisition of noncommercial computer software and computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... noncommercial computer software and computer software documentation. 227.7203-2 Section 227.7203-2 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-2 Acquisition of noncommercial computer software and computer software documentation. (a...

48 CFR 227.7203-2 - Acquisition of noncommercial computer software and computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... noncommercial computer software and computer software documentation. 227.7203-2 Section 227.7203-2 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-2 Acquisition of noncommercial computer software and computer software documentation. (a...

48 CFR 227.7203-2 - Acquisition of noncommercial computer software and computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... noncommercial computer software and computer software documentation. 227.7203-2 Section 227.7203-2 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-2 Acquisition of noncommercial computer software and computer software documentation. (a...

48 CFR 227.7203-10 - Contractor identification and marking of computer software or computer software documentation to...

Code of Federal Regulations, 2014 CFR

2014-10-01

... and marking of computer software or computer software documentation to be furnished with restrictive... Rights in Computer Software and Computer Software Documentation 227.7203-10 Contractor identification and marking of computer software or computer software documentation to be furnished with restrictive markings...

48 CFR 227.7203-2 - Acquisition of noncommercial computer software and computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... noncommercial computer software and computer software documentation. 227.7203-2 Section 227.7203-2 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-2 Acquisition of noncommercial computer software and computer software documentation. (a...

48 CFR 227.7202-3 - Rights in commercial computer software or commercial computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... computer software or commercial computer software documentation. 227.7202-3 Section 227.7202-3 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-3 Rights in commercial computer software or commercial computer software documentation...

48 CFR 227.7203-10 - Contractor identification and marking of computer software or computer software documentation to...

Code of Federal Regulations, 2011 CFR

2011-10-01

... and marking of computer software or computer software documentation to be furnished with restrictive... Rights in Computer Software and Computer Software Documentation 227.7203-10 Contractor identification and marking of computer software or computer software documentation to be furnished with restrictive markings...

48 CFR 227.7202-3 - Rights in commercial computer software or commercial computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... computer software or commercial computer software documentation. 227.7202-3 Section 227.7202-3 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-3 Rights in commercial computer software or commercial computer software documentation...

48 CFR 227.7203-10 - Contractor identification and marking of computer software or computer software documentation to...

Code of Federal Regulations, 2012 CFR

2012-10-01

... and marking of computer software or computer software documentation to be furnished with restrictive... Rights in Computer Software and Computer Software Documentation 227.7203-10 Contractor identification and marking of computer software or computer software documentation to be furnished with restrictive markings...

48 CFR 227.7202-3 - Rights in commercial computer software or commercial computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... computer software or commercial computer software documentation. 227.7202-3 Section 227.7202-3 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-3 Rights in commercial computer software or commercial computer software documentation...

48 CFR 227.7203-10 - Contractor identification and marking of computer software or computer software documentation to...

Code of Federal Regulations, 2010 CFR

2010-10-01

... and marking of computer software or computer software documentation to be furnished with restrictive... Rights in Computer Software and Computer Software Documentation 227.7203-10 Contractor identification and marking of computer software or computer software documentation to be furnished with restrictive markings...

48 CFR 227.7203-10 - Contractor identification and marking of computer software or computer software documentation to...

Code of Federal Regulations, 2013 CFR

2013-10-01

... and marking of computer software or computer software documentation to be furnished with restrictive... Rights in Computer Software and Computer Software Documentation 227.7203-10 Contractor identification and marking of computer software or computer software documentation to be furnished with restrictive markings...

48 CFR 227.7203-2 - Acquisition of noncommercial computer software and computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... noncommercial computer software and computer software documentation. 227.7203-2 Section 227.7203-2 Federal... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-2 Acquisition of noncommercial computer software and computer software documentation. (a...

48 CFR 227.7203-16 - Providing computer software or computer software documentation to foreign governments, foreign...

Code of Federal Regulations, 2011 CFR

2011-10-01

... software or computer software documentation to foreign governments, foreign contractors, or international... Rights in Computer Software and Computer Software Documentation 227.7203-16 Providing computer software or computer software documentation to foreign governments, foreign contractors, or international...

48 CFR 227.7203-16 - Providing computer software or computer software documentation to foreign governments, foreign...

Code of Federal Regulations, 2013 CFR

2013-10-01

... software or computer software documentation to foreign governments, foreign contractors, or international... Rights in Computer Software and Computer Software Documentation 227.7203-16 Providing computer software or computer software documentation to foreign governments, foreign contractors, or international...

48 CFR 227.7203-16 - Providing computer software or computer software documentation to foreign governments, foreign...

Code of Federal Regulations, 2012 CFR

2012-10-01

... software or computer software documentation to foreign governments, foreign contractors, or international... Rights in Computer Software and Computer Software Documentation 227.7203-16 Providing computer software or computer software documentation to foreign governments, foreign contractors, or international...

48 CFR 227.7203-16 - Providing computer software or computer software documentation to foreign governments, foreign...

Code of Federal Regulations, 2014 CFR

2014-10-01

... software or computer software documentation to foreign governments, foreign contractors, or international... Rights in Computer Software and Computer Software Documentation 227.7203-16 Providing computer software or computer software documentation to foreign governments, foreign contractors, or international...

48 CFR 227.7203-16 - Providing computer software or computer software documentation to foreign governments, foreign...

Code of Federal Regulations, 2010 CFR

2010-10-01

... software or computer software documentation to foreign governments, foreign contractors, or international... Rights in Computer Software and Computer Software Documentation 227.7203-16 Providing computer software or computer software documentation to foreign governments, foreign contractors, or international...

48 CFR 227.7203-3 - Early identification of computer software or computer software documentation to be furnished to...

Code of Federal Regulations, 2010 CFR

2010-10-01

... computer software or computer software documentation to be furnished to the Government with restrictions on..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-3 Early identification of computer software or computer software documentation to be furnished to the Government with...

48 CFR 227.7203-3 - Early identification of computer software or computer software documentation to be furnished to...

Code of Federal Regulations, 2012 CFR

2012-10-01

... computer software or computer software documentation to be furnished to the Government with restrictions on..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-3 Early identification of computer software or computer software documentation to be furnished to the Government with...

48 CFR 227.7203-3 - Early identification of computer software or computer software documentation to be furnished to...

Code of Federal Regulations, 2011 CFR

2011-10-01

... computer software or computer software documentation to be furnished to the Government with restrictions on..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-3 Early identification of computer software or computer software documentation to be furnished to the Government with...

48 CFR 227.7203-3 - Early identification of computer software or computer software documentation to be furnished to...

Code of Federal Regulations, 2013 CFR

2013-10-01

... computer software or computer software documentation to be furnished to the Government with restrictions on..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-3 Early identification of computer software or computer software documentation to be furnished to the Government with...

48 CFR 227.7203-3 - Early identification of computer software or computer software documentation to be furnished to...

Code of Federal Regulations, 2014 CFR

2014-10-01

... computer software or computer software documentation to be furnished to the Government with restrictions on..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-3 Early identification of computer software or computer software documentation to be furnished to the Government with...

Galaxy CloudMan: delivering cloud compute clusters

PubMed Central

2010-01-01

Background Widespread adoption of high-throughput sequencing has greatly increased the scale and sophistication of computational infrastructure needed to perform genomic research. An alternative to building and maintaining local infrastructure is “cloud computing”, which, in principle, offers on demand access to flexible computational infrastructure. However, cloud computing resources are not yet suitable for immediate “as is” use by experimental biologists. Results We present a cloud resource management system that makes it possible for individual researchers to compose and control an arbitrarily sized compute cluster on Amazon’s EC2 cloud infrastructure without any informatics requirements. Within this system, an entire suite of biological tools packaged by the NERC Bio-Linux team (http://nebc.nerc.ac.uk/tools/bio-linux) is available for immediate consumption. The provided solution makes it possible, using only a web browser, to create a completely configured compute cluster ready to perform analysis in less than five minutes. Moreover, we provide an automated method for building custom deployments of cloud resources. This approach promotes reproducibility of results and, if desired, allows individuals and labs to add or customize an otherwise available cloud system to better meet their needs. Conclusions The expected knowledge and associated effort with deploying a compute cluster in the Amazon EC2 cloud is not trivial. The solution presented in this paper eliminates these barriers, making it possible for researchers to deploy exactly the amount of computing power they need, combined with a wealth of existing analysis software, to handle the ongoing data deluge. PMID:21210983

An Introduction to the Industrial Applications of Microcontrollers

NASA Astrophysics Data System (ADS)

Carelse, Xavier F.

A microcontroller is sometimes described as a “computer on a chip” because it contains all the features of a full computer including central processor, in-built clock circuitry, ROM, RAM, input and output ports with special features'such as serial communication, analogue-to-digital conversion and, more recently, signal processing. The smallest microcontroller has only eight pins but some having 68 pins are also being marketed. In the last five years, the prices of microcontrollers have dropped by 80% and are now one of the most cost-effective components in industry. Being software-driven, microcontrollers greatly simplify the design of sophisticated instrumentation and control circuitry. They are able to effect precise calculations sometimes needed for feedback in control systems and now form the basis of all intelligent embedded systems such as those required in television and VCR remote controls, microwave ovens, washing machines, etc. More than ten times as many microcontrollers than microprocessors are manufactured and sold in the world in spite of the high profile that the latter enjoys because of the personal computer market. In Zimbabwe, extensive research is being carried out to use microcontrollers to aid the cost recovery of domestic and commercial solar installations as part of the rural electrification programme.

Knowledge-based computer systems for radiotherapy planning.

PubMed

Kalet, I J; Paluszynski, W

1990-08-01

Radiation therapy is one of the first areas of clinical medicine to utilize computers in support of routine clinical decision making. The role of the computer has evolved from simple dose calculations to elaborate interactive graphic three-dimensional simulations. These simulations can combine external irradiation from megavoltage photons, electrons, and particle beams with interstitial and intracavitary sources. With the flexibility and power of modern radiotherapy equipment and the ability of computer programs that simulate anything the machinery can do, we now face a challenge to utilize this capability to design more effective radiation treatments. How can we manage the increased complexity of sophisticated treatment planning? A promising approach will be to use artificial intelligence techniques to systematize our present knowledge about design of treatment plans, and to provide a framework for developing new treatment strategies. Far from replacing the physician, physicist, or dosimetrist, artificial intelligence-based software tools can assist the treatment planning team in producing more powerful and effective treatment plans. Research in progress using knowledge-based (AI) programming in treatment planning already has indicated the usefulness of such concepts as rule-based reasoning, hierarchical organization of knowledge, and reasoning from prototypes. Problems to be solved include how to handle continuously varying parameters and how to evaluate plans in order to direct improvements.

Network Security Validation Using Game Theory

NASA Astrophysics Data System (ADS)

Papadopoulou, Vicky; Gregoriades, Andreas

Non-functional requirements (NFR) such as network security recently gained widespread attention in distributed information systems. Despite their importance however, there is no systematic approach to validate these requirements given the complexity and uncertainty characterizing modern networks. Traditionally, network security requirements specification has been the results of a reactive process. This however, limited the immunity property of the distributed systems that depended on these networks. Security requirements specification need a proactive approach. Networks' infrastructure is constantly under attack by hackers and malicious software that aim to break into computers. To combat these threats, network designers need sophisticated security validation techniques that will guarantee the minimum level of security for their future networks. This paper presents a game-theoretic approach to security requirements validation. An introduction to game theory is presented along with an example that demonstrates the application of the approach.

48 CFR 227.7203-14 - Conformity, acceptance, and warranty of computer software and computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., and warranty of computer software and computer software documentation. 227.7203-14 Section 227.7203-14... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-14 Conformity, acceptance, and warranty of computer software and computer...

48 CFR 227.7203-14 - Conformity, acceptance, and warranty of computer software and computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., and warranty of computer software and computer software documentation. 227.7203-14 Section 227.7203-14... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-14 Conformity, acceptance, and warranty of computer software and computer...

48 CFR 227.7203-14 - Conformity, acceptance, and warranty of computer software and computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., and warranty of computer software and computer software documentation. 227.7203-14 Section 227.7203-14... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-14 Conformity, acceptance, and warranty of computer software and computer...

48 CFR 227.7203-14 - Conformity, acceptance, and warranty of computer software and computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., and warranty of computer software and computer software documentation. 227.7203-14 Section 227.7203-14... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-14 Conformity, acceptance, and warranty of computer software and computer...

48 CFR 227.7203-14 - Conformity, acceptance, and warranty of computer software and computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., and warranty of computer software and computer software documentation. 227.7203-14 Section 227.7203-14... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-14 Conformity, acceptance, and warranty of computer software and computer...

Foundations for a syntatic pattern recognition system for genomic DNA sequences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Searles, D.B.

1993-03-01

The goal of the proposed work is the creation of a software system that will perform sophisticated pattern recognition and related functions at a level of abstraction and with expressive power beyond current general-purpose pattern-matching systems for biological sequences; and with a more uniform language, environment, and graphical user interface, and with greater flexibility, extensibility, embeddability, and ability to incorporate other algorithms, than current special-purpose analytic software.

Framework for ReSTful Web Services in OSGi

NASA Technical Reports Server (NTRS)

Shams, Khawaja S.; Norris, Jeffrey S.; Powell, Mark W.; Crockett, Thomas M.; Mittman, David S.; Fox, Jason M.; Joswig, Joseph C.; Wallick, Michael N.; Torres, Recaredo J.; Rabe, Kenneth

2009-01-01

Ensemble ReST is a software system that eases the development, deployment, and maintenance of server-side application programs to perform functions that would otherwise be performed by client software. Ensemble ReST takes advantage of the proven disciplines of ReST (Representational State Transfer. ReST leverages the standardized HTTP protocol to enable developers to offer services to a diverse variety of clients: from shell scripts to sophisticated Java application suites

Validating Savings Claims of Cold Climate Zero Energy Ready Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williamson, J.; Puttagunta, S.

This study was intended to validate actual performance of three ZERHs in the Northeast to energy models created in REM/Rate v14.5 (one of the certified software programs used to generate a HERS Index) and the National Renewable Energy Laboratory’s Building Energy Optimization (BEopt™) v2.3 E+ (a more sophisticated hourly energy simulation software). This report details the validation methods used to analyze energy consumption at each home.

Computer literacy in nursing education. An overview.

PubMed

Newbern, V B

1985-09-01

Nursing educators are beginning to realize that computer literacy has become a survival skill for the profession. They understand that literacy must be at a level that assures the ability to manage and control the flood of available information and provides an openness and awareness of future technologic possibilities. The computer has been on college campuses for a number of years, used primarily for record storage and retrieval. However, early on a few nurse educators saw the potential for its use as a practice tool. Out of this foresight came both formal and nonformal educational offerings. The evolution of formal coursework in computer literacy has moved from learning about the computer to learning with the computer. Today the use of the computer is expanding geometrically as microcomputers become common. Graduate students and faculty use them for literature searches and data analysis. Undergraduates are routinely using computer-assisted instruction. Coursework in computer technology is fast becoming a given for nursing students and computer competency a requisite for faculty. However, inculcating computer competency in faculty and student repertoires is not an easy task. There are problems related to motivation, resources, and control. Territorial disputes between schools and colleges must be arbitrated. The interface with practice must be addressed. The paucity of adequate software is a real concern. But the potential is enormous, probably restricted only by human creativity. The possibilities for teaching and learning are profound, especially if geographical constraints can be effaced and scarce resources can be shared at minimal cost. Extremely sophisticated research designs and evaluation methodologies can be used routinely.(ABSTRACT TRUNCATED AT 250 WORDS)

TethysCluster: A comprehensive approach for harnessing cloud resources for hydrologic modeling

NASA Astrophysics Data System (ADS)

Nelson, J.; Jones, N.; Ames, D. P.

2015-12-01

Advances in water resources modeling are improving the information that can be supplied to support decisions affecting the safety and sustainability of society. However, as water resources models become more sophisticated and data-intensive they require more computational power to run. Purchasing and maintaining the computing facilities needed to support certain modeling tasks has been cost-prohibitive for many organizations. With the advent of the cloud, the computing resources needed to address this challenge are now available and cost-effective, yet there still remains a significant technical barrier to leverage these resources. This barrier inhibits many decision makers and even trained engineers from taking advantage of the best science and tools available. Here we present the Python tools TethysCluster and CondorPy, that have been developed to lower the barrier to model computation in the cloud by providing (1) programmatic access to dynamically scalable computing resources, (2) a batch scheduling system to queue and dispatch the jobs to the computing resources, (3) data management for job inputs and outputs, and (4) the ability to dynamically create, submit, and monitor computing jobs. These Python tools leverage the open source, computing-resource management, and job management software, HTCondor, to offer a flexible and scalable distributed-computing environment. While TethysCluster and CondorPy can be used independently to provision computing resources and perform large modeling tasks, they have also been integrated into Tethys Platform, a development platform for water resources web apps, to enable computing support for modeling workflows and decision-support systems deployed as web apps.

MCdevelop - a universal framework for Stochastic Simulations

NASA Astrophysics Data System (ADS)

Slawinska, M.; Jadach, S.

2011-03-01

We present MCdevelop, a universal computer framework for developing and exploiting the wide class of Stochastic Simulations (SS) software. This powerful universal SS software development tool has been derived from a series of scientific projects for precision calculations in high energy physics (HEP), which feature a wide range of functionality in the SS software needed for advanced precision Quantum Field Theory calculations for the past LEP experiments and for the ongoing LHC experiments at CERN, Geneva. MCdevelop is a "spin-off" product of HEP to be exploited in other areas, while it will still serve to develop new SS software for HEP experiments. Typically SS involve independent generation of large sets of random "events", often requiring considerable CPU power. Since SS jobs usually do not share memory it makes them easy to parallelize. The efficient development, testing and running in parallel SS software requires a convenient framework to develop software source code, deploy and monitor batch jobs, merge and analyse results from multiple parallel jobs, even before the production runs are terminated. Throughout the years of development of stochastic simulations for HEP, a sophisticated framework featuring all the above mentioned functionality has been implemented. MCdevelop represents its latest version, written mostly in C++ (GNU compiler gcc). It uses Autotools to build binaries (optionally managed within the KDevelop 3.5.3 Integrated Development Environment (IDE)). It uses the open-source ROOT package for histogramming, graphics and the mechanism of persistency for the C++ objects. MCdevelop helps to run multiple parallel jobs on any computer cluster with NQS-type batch system. Program summaryProgram title:MCdevelop Catalogue identifier: AEHW_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHW_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 48 136 No. of bytes in distributed program, including test data, etc.: 355 698 Distribution format: tar.gz Programming language: ANSI C++ Computer: Any computer system or cluster with C++ compiler and UNIX-like operating system. Operating system: Most UNIX systems, Linux. The application programs were thoroughly tested under Ubuntu 7.04, 8.04 and CERN Scientific Linux 5. Has the code been vectorised or parallelised?: Tools (scripts) for optional parallelisation on a PC farm are included. RAM: 500 bytes Classification: 11.3 External routines: ROOT package version 5.0 or higher ( http://root.cern.ch/drupal/). Nature of problem: Developing any type of stochastic simulation program for high energy physics and other areas. Solution method: Object Oriented programming in C++ with added persistency mechanism, batch scripts for running on PC farms and Autotools.

48 CFR 227.7203-8 - Deferred delivery and deferred ordering of computer software and computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... deferred ordering of computer software and computer software documentation. 227.7203-8 Section 227.7203-8... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-8 Deferred delivery and deferred ordering of computer software and computer...

48 CFR 227.7203-8 - Deferred delivery and deferred ordering of computer software and computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... deferred ordering of computer software and computer software documentation. 227.7203-8 Section 227.7203-8... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-8 Deferred delivery and deferred ordering of computer software and computer...

48 CFR 227.7203-8 - Deferred delivery and deferred ordering of computer software and computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... deferred ordering of computer software and computer software documentation. 227.7203-8 Section 227.7203-8... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-8 Deferred delivery and deferred ordering of computer software and computer...

48 CFR 227.7203-8 - Deferred delivery and deferred ordering of computer software and computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... deferred ordering of computer software and computer software documentation. 227.7203-8 Section 227.7203-8... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-8 Deferred delivery and deferred ordering of computer software and computer...

48 CFR 227.7203-8 - Deferred delivery and deferred ordering of computer software and computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... deferred ordering of computer software and computer software documentation. 227.7203-8 Section 227.7203-8... GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-8 Deferred delivery and deferred ordering of computer software and computer...

Fiber Composite Sandwich Thermostructural Behavior: Computational Simulation

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Aiello, R. A.; Murthy, P. L. N.

1986-01-01

Several computational levels of progressive sophistication/simplification are described to computationally simulate composite sandwich hygral, thermal, and structural behavior. The computational levels of sophistication include: (1) three-dimensional detailed finite element modeling of the honeycomb, the adhesive and the composite faces; (2) three-dimensional finite element modeling of the honeycomb assumed to be an equivalent continuous, homogeneous medium, the adhesive and the composite faces; (3) laminate theory simulation where the honeycomb (metal or composite) is assumed to consist of plies with equivalent properties; and (4) derivations of approximate, simplified equations for thermal and mechanical properties by simulating the honeycomb as an equivalent homogeneous medium. The approximate equations are combined with composite hygrothermomechanical and laminate theories to provide a simple and effective computational procedure for simulating the thermomechanical/thermostructural behavior of fiber composite sandwich structures.

48 CFR 252.227-7014 - Rights in noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... computer software and noncommercial computer software documentation. 252.227-7014 Section 252.227-7014... Rights in noncommercial computer software and noncommercial computer software documentation. As prescribed in 227.7203-6(a)(1), use the following clause. Rights in Noncommercial Computer Software and...

48 CFR 252.227-7014 - Rights in noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... computer software and noncommercial computer software documentation. 252.227-7014 Section 252.227-7014... Rights in noncommercial computer software and noncommercial computer software documentation. As prescribed in 227.7203-6(a)(1), use the following clause. Rights in Noncommercial Computer Software and...

48 CFR 252.227-7014 - Rights in noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... computer software and noncommercial computer software documentation. 252.227-7014 Section 252.227-7014... Rights in noncommercial computer software and noncommercial computer software documentation. As prescribed in 227.7203-6(a)(1), use the following clause. Rights in Noncommercial Computer Software and...

48 CFR 252.227-7014 - Rights in noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... computer software and noncommercial computer software documentation. 252.227-7014 Section 252.227-7014... Rights in noncommercial computer software and noncommercial computer software documentation. As prescribed in 227.7203-6(a)(1), use the following clause. Rights in Noncommercial Computer Software and...

48 CFR 252.227-7014 - Rights in noncommercial computer software and noncommercial computer software documentation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... computer software and noncommercial computer software documentation. 252.227-7014 Section 252.227-7014... Rights in noncommercial computer software and noncommercial computer software documentation. As prescribed in 227.7203-6(a)(1), use the following clause. Rights in Noncommercial Computer Software and...

Transformation as a Design Process and Runtime Architecture for High Integrity Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bespalko, S.J.; Winter, V.L.

1999-04-05

We have discussed two aspects of creating high integrity software that greatly benefit from the availability of transformation technology, which in this case is manifest by the requirement for a sophisticated backtracking parser. First, because of the potential for correctly manipulating programs via small changes, an automated non-procedural transformation system can be a valuable tool for constructing high assurance software. Second, modeling the processing of translating data into information as a, perhaps, context-dependent grammar leads to an efficient, compact implementation. From a practical perspective, the transformation process should begin in the domain language in which a problem is initially expressed.more » Thus in order for a transformation system to be practical it must be flexible with respect to domain-specific languages. We have argued that transformation applied to specification results in a highly reliable system. We also attempted to briefly demonstrate that transformation technology applied to the runtime environment will result in a safe and secure system. We thus believe that the sophisticated multi-lookahead backtracking parsing technology is central to the task of being in a position to demonstrate the existence of HIS.« less

An Intelligent Terminal for Access to a Medical Database

PubMed Central

Womble, M. E.; Wilson, S. D.; Keiser, H. N.; Tworek, M. L.

1978-01-01

Very powerful data base management systems (DBMS) now exist which allow medical personnel access to patient record data bases. DBMS's make it easy to retrieve either complete or abbreviated records of patients with similar characteristics. In addition, statistics on data base records are immediately accessible. However, the price of this power is a large computer with the inherent problems of access, response time, and reliability. If a general purpose, time-shared computer is used to get this power, the response time to a request can be either rapid or slow, depending upon loading by other users. Furthermore, if the computer is accessed via dial-up telephone lines, there is competition with other users for telephone ports. If either the DBMS or the host machine is replaced, the medical users, who are typically not sophisticated in computer usage, are forced to learn the new system. Microcomputers, because of their low cost and adaptability, lend themselves to a solution of these problems. A microprocessor-based intelligent terminal has been designed and implemented at the USAF School of Aerospace Medicine to provide a transparent interface between the user and his data base. The intelligent terminal system includes multiple microprocessors, floppy disks, a CRT terminal, and a printer. Users interact with the system at the CRT terminal using menu selection (framing). The system translates the menu selection into the query language of the DBMS and handles all actual communication with the DBMS and its host computer, including telephone dialing and sign on procedures, as well as the actual data base query and response. Retrieved information is stored locally for CRT display, hard copy production, and/or permanent retention. Microprocessor-based communication units provide security for sensitive medical data through encryption/decryption algorithms and high reliability error detection transmission schemes. Highly modular software design permits adapation to a different DBMS and/or host computer with only minor localized software changes. Importantly, this portability is completely transparent to system users. Although the terminal system is independent of the host computer and its DBMS, it has been linked to a UNIVAC 1108 computer supporting MRI's SYSTEM 2000 DBMS.

Instrument control software requirement specification for Extremely Large Telescopes

NASA Astrophysics Data System (ADS)

Young, Peter J.; Kiekebusch, Mario J.; Chiozzi, Gianluca

2010-07-01

Engineers in several observatories are now designing the next generation of optical telescopes, the Extremely Large Telescopes (ELT). These are very complex machines that will host sophisticated astronomical instruments to be used for a wide range of scientific studies. In order to carry out scientific observations, a software infrastructure is required to orchestrate the control of the multiple subsystems and functions. This paper will focus on describing the considerations, strategies and main issues related to the definition and analysis of the software requirements for the ELT's Instrument Control System using modern development processes and modelling tools like SysML.

Differential maneuvering simulator data reduction and analysis software

NASA Technical Reports Server (NTRS)

Beasley, G. P.; Sigman, R. S.

1972-01-01

A multielement data reduction and analysis software package has been developed for use with the Langley differential maneuvering simulator (DMS). This package, which has several independent elements, was developed to support all phases of DMS aircraft simulation studies with a variety of both graphical and tabular information. The overall software package is considered unique because of the number, diversity, and sophistication of the element programs available for use in a single study. The purpose of this paper is to discuss the overall DMS data reduction and analysis package by reviewing the development of the various elements of the software, showing typical results that can be obtained, and discussing how each element can be used.

D-Light on promoters: a client-server system for the analysis and visualization of cis-regulatory elements

PubMed Central

2013-01-01

Background The binding of transcription factors to DNA plays an essential role in the regulation of gene expression. Numerous experiments elucidated binding sequences which subsequently have been used to derive statistical models for predicting potential transcription factor binding sites (TFBS). The rapidly increasing number of genome sequence data requires sophisticated computational approaches to manage and query experimental and predicted TFBS data in the context of other epigenetic factors and across different organisms. Results We have developed D-Light, a novel client-server software package to store and query large amounts of TFBS data for any number of genomes. Users can add small-scale data to the server database and query them in a large scale, genome-wide promoter context. The client is implemented in Java and provides simple graphical user interfaces and data visualization. Here we also performed a statistical analysis showing what a user can expect for certain parameter settings and we illustrate the usage of D-Light with the help of a microarray data set. Conclusions D-Light is an easy to use software tool to integrate, store and query annotation data for promoters. A public D-Light server, the client and server software for local installation and the source code under GNU GPL license are available at http://biwww.che.sbg.ac.at/dlight. PMID:23617301

seismo-live: Training in Seismology using Jupyter Notebooks

NASA Astrophysics Data System (ADS)

Igel, Heiner; Krischer, Lion; van Driel, Martin; Tape, Carl

2017-04-01

Practical training in computational methodologies is still underrepresented in Earth science curriculae despite the increasing use of sometimes highly sophisticated simulation and data processing technologies in research projects. At the same time well-engineered community codes make it easy to return results yet with the danger that the inherent traps of black-box solutions are not well understood. For this purpose we have initiated a community platform (www.seismo-live.org) where Python-based Jupyter notebooks can be accessed and run without necessary downloads or local software installations. The increasingly popular Jupyter notebooks allow combining markup language, graphics, equations, with interactive, executable python codes. The platform already includes general Python training, introduction to the ObsPy library for seismology as well as seismic data processing, noise analysis, and a variety of forward solvers for seismic wave propagation. In addition, an example is shown how Jupyter notebooks can be used to increase reproducibility of published results. Submission of Jupyter notebooks for general seismology are encouraged. The platform can be used for complementary teaching in Earth Science courses on compute-intensive research areas. We present recent developments and new features.

Development and preliminary validation of an index for indicating the risks of the design of working hours to health and wellbeing.

PubMed

Schomann, Carsten; Giebel, Ole; Nachreiner, Friedhelm

2006-01-01

BASS 4, a computer program for the design and evaluation of workings hours, is an example of an ergonomics-based software tool that can be used by safety practitioners at the shop floor with regard to legal, ergonomic, and economic criteria. Based on experiences with this computer program, a less sophisticated Working-Hours-Risk Index for assessing the quality of work schedules (including flexible work hours) to indicate risks to health and wellbeing has been developed to provide a quick and easy applicable tool for legally required risk assessments. The results of a validation study show that this risk index seems to be a promising indicator for predicting risks of health complaints and wellbeing. The purpose of the Risk Index is to simplify the evaluation process at the shop floor and provide some more general information about the quality of a work schedule that can be used for triggering preventive interventions. Such a risk index complies with practitioners' expectations and requests for easy, useful, and valid instruments.

Enhanced cardio vascular image analysis by combined representation of results from dynamic MRI and anatomic CTA

NASA Astrophysics Data System (ADS)

Kuehnel, C.; Hennemuth, A.; Oeltze, S.; Boskamp, T.; Peitgen, H.-O.

2008-03-01

The diagnosis support in the field of coronary artery disease (CAD) is very complex due to the numerous symptoms and performed studies leading to the final diagnosis. CTA and MRI are on their way to replace invasive catheter angiography. Thus, there is a need for sophisticated software tools that present the different analysis results, and correlate the anatomical and dynamic image information. We introduce a new software assistant for the combined result visualization of CTA and MR images, in which a dedicated concept for the structured presentation of original data, segmentation results, and individual findings is realized. Therefore, we define a comprehensive class hierarchy and assign suitable interaction functions. User guidance is coupled as closely as possible with available data, supporting a straightforward workflow design. The analysis results are extracted from two previously developed software assistants, providing coronary artery analysis and measurements, function analysis as well as late enhancement data investigation. As an extension we introduce a finding concept directly relating suspicious positions to the underlying data. An affine registration of CT and MR data in combination with the AHA 17-segment model enables the coupling of local findings to positions in all data sets. Furthermore, sophisticated visualization in 2D and 3D and interactive bull's eye plots facilitate a correlation of coronary stenoses and physiology. The software has been evaluated on 20 patient data sets.

Toward a molecular programming language for algorithmic self-assembly

NASA Astrophysics Data System (ADS)

Patitz, Matthew John

Self-assembly is the process whereby relatively simple components autonomously combine to form more complex objects. Nature exhibits self-assembly to form everything from microscopic crystals to living cells to galaxies. With a desire to both form increasingly sophisticated products and to understand the basic components of living systems, scientists have developed and studied artificial self-assembling systems. One such framework is the Tile Assembly Model introduced by Erik Winfree in 1998. In this model, simple two-dimensional square 'tiles' are designed so that they self-assemble into desired shapes. The work in this thesis consists of a series of results which build toward the future goal of designing an abstracted, high-level programming language for designing the molecular components of self-assembling systems which can perform powerful computations and form into intricate structures. The first two sets of results demonstrate self-assembling systems which perform infinite series of computations that characterize computably enumerable and decidable languages, and exhibit tools for algorithmically generating the necessary sets of tiles. In the next chapter, methods for generating tile sets which self-assemble into complicated shapes, namely a class of discrete self-similar fractal structures, are presented. Next, a software package for graphically designing tile sets, simulating their self-assembly, and debugging designed systems is discussed. Finally, a high-level programming language which abstracts much of the complexity and tedium of designing such systems, while preventing many of the common errors, is presented. The summation of this body of work presents a broad coverage of the spectrum of desired outputs from artificial self-assembling systems and a progression in the sophistication of tools used to design them. By creating a broader and deeper set of modular tools for designing self-assembling systems, we hope to increase the complexity which is attainable. These tools provide a solid foundation for future work in both the Tile Assembly Model and explorations into more advanced models.

GENERATING SOPHISTICATED SPATIAL SURROGATES USING THE MIMS SPATIAL ALLOCATOR

EPA Science Inventory

The Multimedia Integrated Modeling System (MIMS) Spatial Allocator is open-source software for generating spatial surrogates for emissions modeling, changing the map projection of Shapefiles, and performing other types of spatial allocation that does not require the use of a comm...

The Satirical Value of Virtual Worlds

ERIC Educational Resources Information Center

Baggaley, Jon

2010-01-01

Imaginary worlds have been devised by artists and commentators for centuries to focus satirical attention on society's problems. The increasing sophistication of three-dimensional graphics software is generating comparable "virtual worlds" for educational usage. Can such worlds play a satirical role suggesting developments in distance…

Distributed Administration of Online Learning Accounts

ERIC Educational Resources Information Center

Gamrat, Betsy

2004-01-01

Distance learning is a vital part of today's educational environment. Using complex technology, schools are able to connect instructors and students across geographic, physical, and temporal boundaries. Sophisticated software and world-wide connectivity create virtual classrooms that span the globe. These large, accessible, asynchronous,…

An Adaptive Web-Based Support to e-Education in Robotics and Automation

NASA Astrophysics Data System (ADS)

di Giamberardino, Paolo; Temperini, Marco

The paper presents the hardware and software architecture of a remote laboratory, with robotics and automation applications, devised to support e-teaching and e-learning activities, at an undergraduate level in computer engineering. The hardware is composed by modular structures, based on the Lego Mindstorms components: they are reasonably sophisticated in terms of functions, pretty easy to use, and sufficiently affordable in terms of cost. Moreover, being the robots intrinsically modular, wrt the number and distribution of sensors and actuators, they are easily and quickly reconfigurable. A web application makes the laboratory and its robots available via internet. The software framework allows the teacher to define, for the course under her/his responsibility, a learning path made of different and differently complex exercises, graduated in terms of the "difficulty" they require to meet and of the "competence" that the solver is supposed to have shown. The learning path of exercises is adapted to the individual learner's progressively growing competence: at any moment, only a subset of the exercises is available (depending on how close their levels of competence and difficulty are to those of the exercises already solved by the learner).

Redefining Cheminformatics with Intuitive Collaborative Mobile Apps

PubMed Central

Clark, Alex M; Ekins, Sean; Williams, Antony J

2012-01-01

Abstract The proliferation of mobile devices such as smartphones and tablet computers has recently been extended to include a growing ecosystem of increasingly sophisticated chemistry software packages, commonly known as apps. The capabilities that these apps can offer to the practicing chemist are approaching those of conventional desktop-based software, but apps tend to be focused on a relatively small range of tasks. To overcome this, chemistry apps must be able to seamlessly transfer data to other apps, and through the network to other devices, as well as to other platforms, such as desktops and servers, using documented file formats and protocols whenever possible. This article describes the development and state of the art with regard to chemistry-aware apps that make use of facile data interchange, and some of the scenarios in which these apps can be inserted into a chemical information workflow to increase productivity. A selection of contemporary apps is used to demonstrate their relevance to pharmaceutical research. Mobile apps represent a novel approach for delivery of cheminformatics tools to chemists and other scientists, and indications suggest that mobile devices represent a disruptive technology for drug discovery, as they have been to many other industries. PMID:23198002

MITHRA 1.0: A full-wave simulation tool for free electron lasers

NASA Astrophysics Data System (ADS)

Fallahi, Arya; Yahaghi, Alireza; Kärtner, Franz X.

2018-07-01

Free Electron Lasers (FELs) are a solution for providing intense, coherent and bright radiation in the hard X-ray regime. Due to the low wall-plug efficiency of FEL facilities, it is crucial and additionally very useful to develop complete and accurate simulation tools for better optimizing a FEL interaction. The highly sophisticated dynamics involved in a FEL process was the main obstacle hindering the development of general simulation tools for this problem. We present a numerical algorithm based on finite difference time domain/Particle in cell (FDTD/PIC) in a Lorentz boosted coordinate system which is able to fulfill a full-wave simulation of a FEL process. The developed software offers a suitable tool for the analysis of FEL interactions without considering any of the usual approximations. A coordinate transformation to bunch rest frame makes the very different length scales of bunch size, optical wavelengths and the undulator period transform to values with the same order. Consequently, FDTD/PIC simulations in conjunction with efficient parallelization techniques make the full-wave simulation feasible using the available computational resources. Several examples of free electron lasers are analyzed using the developed software, the results are benchmarked based on standard FEL codes and discussed in detail.

Software design for automated assembly of truss structures

NASA Technical Reports Server (NTRS)

Herstrom, Catherine L.; Grantham, Carolyn; Allen, Cheryl L.; Doggett, William R.; Will, Ralph W.

1992-01-01

Concern over the limited intravehicular activity time has increased the interest in performing in-space assembly and construction operations with automated robotic systems. A technique being considered at LaRC is a supervised-autonomy approach, which can be monitored by an Earth-based supervisor that intervenes only when the automated system encounters a problem. A test-bed to support evaluation of the hardware and software requirements for supervised-autonomy assembly methods was developed. This report describes the design of the software system necessary to support the assembly process. The software is hierarchical and supports both automated assembly operations and supervisor error-recovery procedures, including the capability to pause and reverse any operation. The software design serves as a model for the development of software for more sophisticated automated systems and as a test-bed for evaluation of new concepts and hardware components.

Acceleration of atmospheric Cherenkov telescope signal processing to real-time speed with the Auto-Pipe design system

NASA Astrophysics Data System (ADS)

Tyson, Eric J.; Buckley, James; Franklin, Mark A.; Chamberlain, Roger D.

2008-10-01

The imaging atmospheric Cherenkov technique for high-energy gamma-ray astronomy is emerging as an important new technique for studying the high energy universe. Current experiments have data rates of ≈20TB/year and duty cycles of about 10%. In the future, more sensitive experiments may produce up to 1000 TB/year. The data analysis task for these experiments requires keeping up with this data rate in close to real-time. Such data analysis is a classic example of a streaming application with very high performance requirements. This class of application often benefits greatly from the use of non-traditional approaches for computation including using special purpose hardware (FPGAs and ASICs), or sophisticated parallel processing techniques. However, designing, debugging, and deploying to these architectures is difficult and thus they are not widely used by the astrophysics community. This paper presents the Auto-Pipe design toolset that has been developed to address many of the difficulties in taking advantage of complex streaming computer architectures for such applications. Auto-Pipe incorporates a high-level coordination language, functional and performance simulation tools, and the ability to deploy applications to sophisticated architectures. Using the Auto-Pipe toolset, we have implemented the front-end portion of an imaging Cherenkov data analysis application, suitable for real-time or offline analysis. The application operates on data from the VERITAS experiment, and shows how Auto-Pipe can greatly ease performance optimization and application deployment of a wide variety of platforms. We demonstrate a performance improvement over a traditional software approach of 32x using an FPGA solution and 3.6x using a multiprocessor based solution.

A new approach for instrument software at Gemini

NASA Astrophysics Data System (ADS)

Gillies, Kim; Nunez, Arturo; Dunn, Jennifer

2008-07-01

Gemini Observatory is now developing its next generation of astronomical instruments, the Aspen instruments. These new instruments are sophisticated and costly requiring large distributed, collaborative teams. Instrument software groups often include experienced team members with existing mature code. Gemini has taken its experience from the previous generation of instruments and current hardware and software technology to create an approach for developing instrument software that takes advantage of the strengths of our instrument builders and our own operations needs. This paper describes this new software approach that couples a lightweight infrastructure and software library with aspects of modern agile software development. The Gemini Planet Imager instrument project, which is currently approaching its critical design review, is used to demonstrate aspects of this approach. New facilities under development will face similar issues in the future, and the approach presented here can be applied to other projects.

Reading wild minds: A computational assay of Theory of Mind sophistication across seven primate species

PubMed Central

Devaine, Marie; San-Galli, Aurore; Trapanese, Cinzia; Bardino, Giulia; Hano, Christelle; Saint Jalme, Michel; Bouret, Sebastien

2017-01-01

Theory of Mind (ToM), i.e. the ability to understand others' mental states, endows humans with highly adaptive social skills such as teaching or deceiving. Candidate evolutionary explanations have been proposed for the unique sophistication of human ToM among primates. For example, the Machiavellian intelligence hypothesis states that the increasing complexity of social networks may have induced a demand for sophisticated ToM. This type of scenario ignores neurocognitive constraints that may eventually be crucial limiting factors for ToM evolution. In contradistinction, the cognitive scaffolding hypothesis asserts that a species' opportunity to develop sophisticated ToM is mostly determined by its general cognitive capacity (on which ToM is scaffolded). However, the actual relationships between ToM sophistication and either brain volume (a proxy for general cognitive capacity) or social group size (a proxy for social network complexity) are unclear. Here, we let 39 individuals sampled from seven non-human primate species (lemurs, macaques, mangabeys, orangutans, gorillas and chimpanzees) engage in simple dyadic games against artificial ToM players (via a familiar human caregiver). Using computational analyses of primates' choice sequences, we found that the probability of exhibiting a ToM-compatible learning style is mainly driven by species' brain volume (rather than by social group size). Moreover, primates' social cognitive sophistication culminates in a precursor form of ToM, which still falls short of human fully-developed ToM abilities. PMID:29112973

Reading wild minds: A computational assay of Theory of Mind sophistication across seven primate species.

PubMed

Devaine, Marie; San-Galli, Aurore; Trapanese, Cinzia; Bardino, Giulia; Hano, Christelle; Saint Jalme, Michel; Bouret, Sebastien; Masi, Shelly; Daunizeau, Jean

2017-11-01

Theory of Mind (ToM), i.e. the ability to understand others' mental states, endows humans with highly adaptive social skills such as teaching or deceiving. Candidate evolutionary explanations have been proposed for the unique sophistication of human ToM among primates. For example, the Machiavellian intelligence hypothesis states that the increasing complexity of social networks may have induced a demand for sophisticated ToM. This type of scenario ignores neurocognitive constraints that may eventually be crucial limiting factors for ToM evolution. In contradistinction, the cognitive scaffolding hypothesis asserts that a species' opportunity to develop sophisticated ToM is mostly determined by its general cognitive capacity (on which ToM is scaffolded). However, the actual relationships between ToM sophistication and either brain volume (a proxy for general cognitive capacity) or social group size (a proxy for social network complexity) are unclear. Here, we let 39 individuals sampled from seven non-human primate species (lemurs, macaques, mangabeys, orangutans, gorillas and chimpanzees) engage in simple dyadic games against artificial ToM players (via a familiar human caregiver). Using computational analyses of primates' choice sequences, we found that the probability of exhibiting a ToM-compatible learning style is mainly driven by species' brain volume (rather than by social group size). Moreover, primates' social cognitive sophistication culminates in a precursor form of ToM, which still falls short of human fully-developed ToM abilities.

A case for spiking neural network simulation based on configurable multiple-FPGA systems.

PubMed

Yang, Shufan; Wu, Qiang; Li, Renfa

2011-09-01

Recent neuropsychological research has begun to reveal that neurons encode information in the timing of spikes. Spiking neural network simulations are a flexible and powerful method for investigating the behaviour of neuronal systems. Simulation of the spiking neural networks in software is unable to rapidly generate output spikes in large-scale of neural network. An alternative approach, hardware implementation of such system, provides the possibility to generate independent spikes precisely and simultaneously output spike waves in real time, under the premise that spiking neural network can take full advantage of hardware inherent parallelism. We introduce a configurable FPGA-oriented hardware platform for spiking neural network simulation in this work. We aim to use this platform to combine the speed of dedicated hardware with the programmability of software so that it might allow neuroscientists to put together sophisticated computation experiments of their own model. A feed-forward hierarchy network is developed as a case study to describe the operation of biological neural systems (such as orientation selectivity of visual cortex) and computational models of such systems. This model demonstrates how a feed-forward neural network constructs the circuitry required for orientation selectivity and provides platform for reaching a deeper understanding of the primate visual system. In the future, larger scale models based on this framework can be used to replicate the actual architecture in visual cortex, leading to more detailed predictions and insights into visual perception phenomenon.

VML 3.0 Reactive Sequencing Objects and Matrix Math Operations for Attitude Profiling

NASA Technical Reports Server (NTRS)

Grasso, Christopher A.; Riedel, Joseph E.

2012-01-01

VML (Virtual Machine Language) has been used as the sequencing flight software on over a dozen JPL deep-space missions, most recently flying on GRAIL and JUNO. In conjunction with the NASA SBIR entitled "Reactive Rendezvous and Docking Sequencer", VML version 3.0 has been enhanced to include object-oriented element organization, built-in queuing operations, and sophisticated matrix / vector operations. These improvements allow VML scripts to easily perform much of the work that formerly would have required a great deal of expensive flight software development to realize. Autonomous turning and tracking makes considerable use of new VML features. Profiles generated by flight software are managed using object-oriented VML data constructs executed in discrete time by the VML flight software. VML vector and matrix operations provide the ability to calculate and supply quaternions to the attitude controller flight software which produces torque requests. Using VML-based attitude planning components eliminates flight software development effort, and reduces corresponding costs. In addition, the direct management of the quaternions allows turning and tracking to be tied in with sophisticated high-level VML state machines. These state machines provide autonomous management of spacecraft operations during critical tasks like a hypothetic Mars sample return rendezvous and docking. State machines created for autonomous science observations can also use this sort of attitude planning system, allowing heightened autonomy levels to reduce operations costs. VML state machines cannot be considered merely sequences - they are reactive logic constructs capable of autonomous decision making within a well-defined domain. The state machine approach enabled by VML 3.0 is progressing toward flight capability with a wide array of applicable mission activities.

48 CFR 227.7202-4 - Contract clause.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Software and Computer Software Documentation 227.7202-4 Contract clause. A specific contract clause governing the Government's rights in commercial computer software or commercial computer software..., release, perform, display, or disclose computer software or computer software documentation shall be...

48 CFR 227.7202-4 - Contract clause.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Software and Computer Software Documentation 227.7202-4 Contract clause. A specific contract clause governing the Government's rights in commercial computer software or commercial computer software..., release, perform, display, or disclose computer software or computer software documentation shall be...

48 CFR 227.7202-4 - Contract clause.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Software and Computer Software Documentation 227.7202-4 Contract clause. A specific contract clause governing the Government's rights in commercial computer software or commercial computer software..., release, perform, display, or disclose computer software or computer software documentation shall be...

48 CFR 227.7202-4 - Contract clause.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Software and Computer Software Documentation 227.7202-4 Contract clause. A specific contract clause governing the Government's rights in commercial computer software or commercial computer software..., release, perform, display, or disclose computer software or computer software documentation shall be...

48 CFR 227.7202-4 - Contract clause.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Software and Computer Software Documentation 227.7202-4 Contract clause. A specific contract clause governing the Government's rights in commercial computer software or commercial computer software..., release, perform, display, or disclose computer software or computer software documentation shall be...

MUMEDALA--An Approach to Multi-Media Authoring.

ERIC Educational Resources Information Center

Baker, Philip G.

1984-01-01

Discusses pedagogical factors influencing design and construction of sophisticated educational multimedia workstations, and presents an overview of the Multi-Media Authoring Language system, an experimental test vehicle providing a framework in which to conduct hardware, software, and interfacing experiments necessary to produce a solution to…

Profile Of 'Original Articles' Published In 2016 By The Journal Of Ayub Medical College, Pakistan.

PubMed

Shaikh, Masood Ali

2018-01-01

Journal of Ayub Medical College (JAMC) is the only Medline indexed biomedical journal of Pakistan that is edited and published by a medical college. Assessing the trends of study designs employed, statistical methods used, and statistical analysis software used in the articles of medical journals help understand the sophistication of research published. The objectives of this descriptive study were to assess all original articles published by JAMC in the year 2016. JAMC published 147 original articles in the year 2016. The most commonly used study design was crosssectional studies, with 64 (43.5%) articles reporting its use. Statistical tests involving bivariate analysis were most common and reported by 73 (49.6%) articles. Use of SPSS software was reported by 109 (74.1%) of articles. Most 138 (93.9%) of the original articles published were based on studies conducted in Pakistan. The number and sophistication of analysis reported in JAMC increased from year 2014 to 2016.

A High-Speed, Real-Time Visualization and State Estimation Platform for Monitoring and Control of Electric Distribution Systems: Implementation and Field Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lundstrom, Blake; Gotseff, Peter; Giraldez, Julieta

Continued deployment of renewable and distributed energy resources is fundamentally changing the way that electric distribution systems are controlled and operated; more sophisticated active system control and greater situational awareness are needed. Real-time measurements and distribution system state estimation (DSSE) techniques enable more sophisticated system control and, when combined with visualization applications, greater situational awareness. This paper presents a novel demonstration of a high-speed, real-time DSSE platform and related control and visualization functionalities, implemented using existing open-source software and distribution system monitoring hardware. Live scrolling strip charts of meter data and intuitive annotated map visualizations of the entire state (obtainedmore » via DSSE) of a real-world distribution circuit are shown. The DSSE implementation is validated to demonstrate provision of accurate voltage data. This platform allows for enhanced control and situational awareness using only a minimum quantity of distribution system measurement units and modest data and software infrastructure.« less

48 CFR 12.212 - Computer software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Computer software. 12.212... software. (a) Commercial computer software or commercial computer software documentation shall be acquired... required to— (1) Furnish technical information related to commercial computer software or commercial...

48 CFR 12.212 - Computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Computer software. 12.212... software. (a) Commercial computer software or commercial computer software documentation shall be acquired... required to— (1) Furnish technical information related to commercial computer software or commercial...

48 CFR 12.212 - Computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Computer software. 12.212... software. (a) Commercial computer software or commercial computer software documentation shall be acquired... required to— (1) Furnish technical information related to commercial computer software or commercial...

48 CFR 12.212 - Computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Computer software. 12.212... software. (a) Commercial computer software or commercial computer software documentation shall be acquired... required to— (1) Furnish technical information related to commercial computer software or commercial...

48 CFR 12.212 - Computer software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Computer software. 12.212... software. (a) Commercial computer software or commercial computer software documentation shall be acquired... required to— (1) Furnish technical information related to commercial computer software or commercial...

Using a graphical programming language to write CAMAC/GPIB instrument drivers

NASA Technical Reports Server (NTRS)

Zambrana, Horacio; Johanson, William

1991-01-01

To reduce the complexities of conventional programming, graphical software was used in the development of instrumentation drivers. The graphical software provides a standard set of tools (graphical subroutines) which are sufficient to program the most sophisticated CAMAC/GPIB drivers. These tools were used and instrumentation drivers were successfully developed for operating CAMAC/GPIB hardware from two different manufacturers: LeCroy and DSP. The use of these tools is presented for programming a LeCroy A/D Waveform Analyzer.

Foundations for a syntatic pattern recognition system for genomic DNA sequences. [Annual] report, 1 December 1991--31 March 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Searles, D.B.

1993-03-01

The goal of the proposed work is the creation of a software system that will perform sophisticated pattern recognition and related functions at a level of abstraction and with expressive power beyond current general-purpose pattern-matching systems for biological sequences; and with a more uniform language, environment, and graphical user interface, and with greater flexibility, extensibility, embeddability, and ability to incorporate other algorithms, than current special-purpose analytic software.

A Java software for creation of image mosaics.

PubMed

Bossert, Oliver

2004-08-01

Besides the dimensions of the selected image field width, the resolution of the individual objects is also of major importance for automatic reconstruction and other sophisticated histological work. The software solution presented here allows the user to create image mosaics by using a combination of several photographs. Optimum control is achieved by combining two procedures and several control mechanisms. In sample tests involving 50 image pairs, all images were mosaiced without giving rise to error. The program is ready for public download.

Notes on the history of the radiological study of Egyptian mummies: from X-rays to new imaging techniques.

PubMed

Cosmacini, P; Piacentini, P

2008-08-01

A few centuries after the practice of mummification was finally abolished in the seventh century A.D., mummies began to capture the collective imagination, exerting a mysterious fascination that continues to this day. From the beginning, the radiological study of Egyptian mummies permitted the collection not only of medical data but also of anthropological and archaeological evidence. The first radiological study of an Egyptian mummy was performed by Flinders Petrie shortly after the discovery of X-rays in 1895, and since then, radiology has never stopped investigating these special patients. By the end of the 1970s, computed tomography (CT) scanning permitted more in-depth studies to be carried out without requiring the mummies to be removed from their cartonnage. CT images can be used to obtain a three-dimensional reconstruction of the mummy that provides important new information, in part thanks to the virtual endoscopy technique known as "fly through". Moreover, starting from CT data and using sophisticated graphics software, one can reconstruct an image of the face of the mummified individual at the time of his or her death. The history of imaging, from its origins until now, from the simplest to the most sophisticated technique, allows us to appreciate why these studies have been, and still are, fundamental in the study of Egyptian mummies.

Interoperability and complementarity of simulation tools for beamline design in the OASYS environment

NASA Astrophysics Data System (ADS)

Rebuffi, Luca; Sanchez del Rio, Manuel

2017-08-01

In the next years most of the major synchrotron radiation facilities around the world will upgrade to 4th-generation Diffraction Limited Storage Rings using multi-bend-achromat technology. Moreover, several Free Electron Lasers are ready-to-go or in phase of completion. These events represent a huge challenge for the optics physicists responsible of designing and calculating optical systems capable to exploit the revolutionary characteristics of the new photon beams. Reliable and robust beamline design is nowadays based on sophisticated computer simulations only possible by lumping together different simulation tools. The OASYS (OrAnge SYnchrotron Suite) suite drives several simulation tools providing new mechanisms of interoperability and communication within the same software environment. OASYS has been successfully used during the conceptual design of many beamline and optical designs for the ESRF and Elettra- Sincrotrone Trieste upgrades. Some examples are presented showing comparisons and benchmarking of simulations against calculated and experimental data.

Simulation tools for particle-based reaction-diffusion dynamics in continuous space

PubMed Central

2014-01-01

Particle-based reaction-diffusion algorithms facilitate the modeling of the diffusional motion of individual molecules and the reactions between them in cellular environments. A physically realistic model, depending on the system at hand and the questions asked, would require different levels of modeling detail such as particle diffusion, geometrical confinement, particle volume exclusion or particle-particle interaction potentials. Higher levels of detail usually correspond to increased number of parameters and higher computational cost. Certain systems however, require these investments to be modeled adequately. Here we present a review on the current field of particle-based reaction-diffusion software packages operating on continuous space. Four nested levels of modeling detail are identified that capture incrementing amount of detail. Their applicability to different biological questions is discussed, arching from straight diffusion simulations to sophisticated and expensive models that bridge towards coarse grained molecular dynamics. PMID:25737778

GiveMe Shelter: a people-centred design process for promoting independent inquiry-led learning in engineering

NASA Astrophysics Data System (ADS)

Dyer, Mark; Grey, Thomas; Kinnane, Oliver

2017-11-01

It has become increasingly common for tasks traditionally carried out by engineers to be undertaken by technicians and technologist with access to sophisticated computers and software that can often perform complex calculations that were previously the responsibility of engineers. Not surprisingly, this development raises serious questions about the future role of engineers and the education needed to address these changes in technology as well as emerging priorities from societal to environmental challenges. In response to these challenges, a new design module was created for undergraduate engineering students to design and build temporary shelters for a wide variety of end users from refugees, to the homeless and children. Even though the module provided guidance on principles of design thinking and methods for observing users needs through field studies, the students found it difficult to respond to needs of specific end users but instead focused more on purely technical issues.

Improvement in the accuracy of flux measurement of radio sources by exploiting an arithmetic pattern in photon bunching noise

NASA Astrophysics Data System (ADS)

Lieu, Richard

2018-01-01

A hierarchy of statistics of increasing sophistication and accuracy is proposed, to exploit an interesting and fundamental arithmetic structure in the photon bunching noise of incoherent light of large photon occupation number, with the purpose of suppressing the noise and rendering a more reliable and unbiased measurement of the light intensity. The method does not require any new hardware, rather it operates at the software level, with the help of high precision computers, to reprocess the intensity time series of the incident light to create a new series with smaller bunching noise coherence length. The ultimate accuracy improvement of this method of flux measurement is limited by the timing resolution of the detector and the photon occupation number of the beam (the higher the photon number the better the performance). The principal application is accuracy improvement in the bolometric flux measurement of a radio source.

Johnston Atoll Plutonium Cleanup Project. Contract bridge report. Technical report, 1 June-5 August 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hellier, C.L.; Doane, R.W.

1995-04-01

This report continues the documentation of the operation of TMA/Eberline`s Segmented Gate System technology for removing mixed plutonium and americium contamination at DNA`s Johnston Atoll site. Contaminated feed is conveyed under arrays of radiation detectors coupled with sophisticated computer software developed by Eberline Instrument Corporation. Segmented gates (chutes) on pneumatically-driven pistons move forward when contamination is detected to remove only the contaminated portion from the main flow of feed material. Only about one pint of contaminant is removed during each diversion event. At the JA site, a 98% volume reduction has been achieved, with the remediated soil cleaned to DNA`smore » criteria for release for unrestricted use of 500 Bq/kg total transuranic alpha contamination and no hot particles of greater than 5000 Becquerrels. The low level waste concentrate is expected to be packaged for shipment to an approved defense waste disposal site.« less

JSPAM: A restricted three-body code for simulating interacting galaxies

NASA Astrophysics Data System (ADS)

Wallin, J. F.; Holincheck, A. J.; Harvey, A.

2016-07-01

Restricted three-body codes have a proven ability to recreate much of the disturbed morphology of actual interacting galaxies. As more sophisticated n-body models were developed and computer speed increased, restricted three-body codes fell out of favor. However, their supporting role for performing wide searches of parameter space when fitting orbits to real systems demonstrates a continuing need for their use. Here we present the model and algorithm used in the JSPAM code. A precursor of this code was originally described in 1990, and was called SPAM. We have recently updated the software with an alternate potential and a treatment of dynamical friction to more closely mimic the results from n-body tree codes. The code is released publicly for use under the terms of the Academic Free License ("AFL") v. 3.0 and has been added to the Astrophysics Source Code Library.

Implementation errors in the GingerALE Software: Description and recommendations.

PubMed

Eickhoff, Simon B; Laird, Angela R; Fox, P Mickle; Lancaster, Jack L; Fox, Peter T

2017-01-01

Neuroscience imaging is a burgeoning, highly sophisticated field the growth of which has been fostered by grant-funded, freely distributed software libraries that perform voxel-wise analyses in anatomically standardized three-dimensional space on multi-subject, whole-brain, primary datasets. Despite the ongoing advances made using these non-commercial computational tools, the replicability of individual studies is an acknowledged limitation. Coordinate-based meta-analysis offers a practical solution to this limitation and, consequently, plays an important role in filtering and consolidating the enormous corpus of functional and structural neuroimaging results reported in the peer-reviewed literature. In both primary data and meta-analytic neuroimaging analyses, correction for multiple comparisons is a complex but critical step for ensuring statistical rigor. Reports of errors in multiple-comparison corrections in primary-data analyses have recently appeared. Here, we report two such errors in GingerALE, a widely used, US National Institutes of Health (NIH)-funded, freely distributed software package for coordinate-based meta-analysis. These errors have given rise to published reports with more liberal statistical inferences than were specified by the authors. The intent of this technical report is threefold. First, we inform authors who used GingerALE of these errors so that they can take appropriate actions including re-analyses and corrective publications. Second, we seek to exemplify and promote an open approach to error management. Third, we discuss the implications of these and similar errors in a scientific environment dependent on third-party software. Hum Brain Mapp 38:7-11, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

The EPOS ICT Architecture

NASA Astrophysics Data System (ADS)

Jeffery, Keith; Harrison, Matt; Bailo, Daniele

2016-04-01

The EPOS-PP Project 2010-2014 proposed an architecture and demonstrated feasibility with a prototype. Requirements based on use cases were collected and an inventory of assets (e.g. datasets, software, users, computing resources, equipment/detectors, laboratory services) (RIDE) was developed. The architecture evolved through three stages of refinement with much consultation both with the EPOS community representing EPOS users and participants in geoscience and with the overall ICT community especially those working on research such as the RDA (Research Data Alliance) community. The architecture consists of a central ICS (Integrated Core Services) consisting of a portal and catalog, the latter providing to end-users a 'map' of all EPOS resources (datasets, software, users, computing, equipment/detectors etc.). ICS is extended to ICS-d (distributed ICS) for certain services (such as visualisation software services or Cloud computing resources) and CES (Computational Earth Science) for specific simulation or analytical processing. ICS also communicates with TCS (Thematic Core Services) which represent European-wide portals to national and local assets, resources and services in the various specific domains (e.g. seismology, volcanology, geodesy) of EPOS. The EPOS-IP project 2015-2019 started October 2015. Two work-packages cover the ICT aspects; WP6 involves interaction with the TCS while WP7 concentrates on ICS including interoperation with ICS-d and CES offerings: in short the ICT architecture. Based on the experience and results of EPOS-PP the ICT team held a pre-meeting in July 2015 and set out a project plan. The first major activity involved requirements (re-)collection with use cases and also updating the inventory of assets held by the various TCS in EPOS. The RIDE database of assets is currently being converted to CERIF (Common European Research Information Format - an EU Recommendation to Member States) to provide the basis for the EPOS-IP ICS Catalog. In parallel the ICT team is tracking developments in ICT for relevance to EPOS-IP. In particular, the potential utilisation of e-Is (e-Infrastructures) such as GEANT(network), AARC (security), EGI (GRID computing), EUDAT (data curation), PRACE (High Performance Computing), HELIX-Nebula / Open Science Cloud (Cloud computing) are being assessed. Similarly relationships to other e-RIs (e-Research Infrastructures) such as ENVRI+, EXCELERATE and other ESFRI (European Strategic Forum for Research Infrastructures) projects are developed to share experience and technology and to promote interoperability. EPOS ICT team members are also involved in VRE4EIC, a project developing a reference architecture and component software services for a Virtual Research Environment to be superimposed on EPOS-ICS. The challenge which is being tackled now is therefore to keep consistency and interoperability among the different modules, initiatives and actors which participate to the process of running the EPOS platform. It implies both a continuous update about IT aspects of mentioned initiatives and a refinement of the e-architecture designed so far. One major aspect of EPOS-IP is the ICT support for legalistic, financial and governance aspects of the EPOS ERIC to be initiated during EPOS-IP. This implies a sophisticated AAAI (Authentication, authorization, accounting infrastructure) with consistency throughout the software, communications and data stack.

Precision agriculture and information technology

Treesearch

Daniel L. Schmoldt

2001-01-01

As everyone knows, knowledge (along with its less-sophisticated sibling, information) is power. For a long time, detailed knowledge (in agriculture) has been generally inaccessible or was prohibitively expensive to acquire. Advances in electronics, communications, and software over the past several decades have removed those earlier impediments. Inexpensive sensors and...

seismo-live: Training in Computational Seismology using Jupyter Notebooks

NASA Astrophysics Data System (ADS)

Igel, H.; Krischer, L.; van Driel, M.; Tape, C.

2016-12-01

Practical training in computational methodologies is still underrepresented in Earth science curriculae despite the increasing use of sometimes highly sophisticated simulation technologies in research projects. At the same time well-engineered community codes make it easy to return simulation-based results yet with the danger that the inherent traps of numerical solutions are not well understood. It is our belief that training with highly simplified numerical solutions (here to the equations describing elastic wave propagation) with carefully chosen elementary ingredients of simulation technologies (e.g., finite-differencing, function interpolation, spectral derivatives, numerical integration) could substantially improve this situation. For this purpose we have initiated a community platform (www.seismo-live.org) where Python-based Jupyter notebooks can be accessed and run without and necessary downloads or local software installations. The increasingly popular Jupyter notebooks allow combining markup language, graphics, equations with interactive, executable python codes. We demonstrate the potential with training notebooks for the finite-difference method, pseudospectral methods, finite/spectral element methods, the finite-volume and the discontinuous Galerkin method. The platform already includes general Python training, introduction to the ObsPy library for seismology as well as seismic data processing and noise analysis. Submission of Jupyter notebooks for general seismology are encouraged. The platform can be used for complementary teaching in Earth Science courses on compute-intensive research areas.

Wildlife software: procedures for publication of computer software

USGS Publications Warehouse

Samuel, M.D.

1990-01-01

Computers and computer software have become an integral part of the practice of wildlife science. Computers now play an important role in teaching, research, and management applications. Because of the specialized nature of wildlife problems, specific computer software is usually required to address a given problem (e.g., home range analysis). This type of software is not usually available from commercial vendors and therefore must be developed by those wildlife professionals with particular skill in computer programming. Current journal publication practices generally prevent a detailed description of computer software associated with new techniques. In addition, peer review of journal articles does not usually include a review of associated computer software. Thus, many wildlife professionals are usually unaware of computer software that would meet their needs or of major improvements in software they commonly use. Indeed most users of wildlife software learn of new programs or important changes only by word of mouth.

Ocean Models and Proper Orthogonal Decomposition

NASA Astrophysics Data System (ADS)

Salas-de-Leon, D. A.

2007-05-01

The increasing computational developments and the better understanding of mathematical and physical systems resulted in an increasing number of ocean models. Long time ago, modelers were like a secret organization and recognize each other by using secret codes and languages that only a select group of people was able to recognize and understand. The access to computational systems was reduced, on one hand equipment and the using time of computers were expensive and restricted, and on the other hand, they required an advance computational languages that not everybody wanted to learn. Now a days most college freshman own a personal computer (PC or laptop), and/or have access to more sophisticated computational systems than those available for research in the early 80's. The resource availability resulted in a mayor access to all kind models. Today computer speed and time and the algorithms does not seem to be a problem, even though some models take days to run in small computational systems. Almost every oceanographic institution has their own model, what is more, in the same institution from one office to the next there are different models for the same phenomena, developed by different research member, the results does not differ substantially since the equations are the same, and the solving algorithms are similar. The algorithms and the grids, constructed with algorithms, can be found in text books and/or over the internet. Every year more sophisticated models are constructed. The Proper Orthogonal Decomposition is a technique that allows the reduction of the number of variables to solve keeping the model properties, for which it can be a very useful tool in diminishing the processes that have to be solved using "small" computational systems, making sophisticated models available for a greater community.

Toward fully automated processing of dynamic susceptibility contrast perfusion MRI for acute ischemic cerebral stroke.

PubMed

Kim, Jinsuh; Leira, Enrique C; Callison, Richard C; Ludwig, Bryan; Moritani, Toshio; Magnotta, Vincent A; Madsen, Mark T

2010-05-01

We developed fully automated software for dynamic susceptibility contrast (DSC) MR perfusion-weighted imaging (PWI) to efficiently and reliably derive critical hemodynamic information for acute stroke treatment decisions. Brain MR PWI was performed in 80 consecutive patients with acute nonlacunar ischemic stroke within 24h after onset of symptom from January 2008 to August 2009. These studies were automatically processed to generate hemodynamic parameters that included cerebral blood flow and cerebral blood volume, and the mean transit time (MTT). To develop reliable software for PWI analysis, we used computationally robust algorithms including the piecewise continuous regression method to determine bolus arrival time (BAT), log-linear curve fitting, arrival time independent deconvolution method and sophisticated motion correction methods. An optimal arterial input function (AIF) search algorithm using a new artery-likelihood metric was also developed. Anatomical locations of the automatically determined AIF were reviewed and validated. The automatically computed BAT values were statistically compared with estimated BAT by a single observer. In addition, gamma-variate curve-fitting errors of AIF and inter-subject variability of AIFs were analyzed. Lastly, two observes independently assessed the quality and area of hypoperfusion mismatched with restricted diffusion area from motion corrected MTT maps and compared that with time-to-peak (TTP) maps using the standard approach. The AIF was identified within an arterial branch and enhanced areas of perfusion deficit were visualized in all evaluated cases. Total processing time was 10.9+/-2.5s (mean+/-s.d.) without motion correction and 267+/-80s (mean+/-s.d.) with motion correction on a standard personal computer. The MTT map produced with our software adequately estimated brain areas with perfusion deficit and was significantly less affected by random noise of the PWI when compared with the TTP map. Results of image quality assessment by two observers revealed that the MTT maps exhibited superior quality over the TTP maps (88% good rating of MTT as compared to 68% of TTP). Our software allowed fully automated deconvolution analysis of DSC PWI using proven efficient algorithms that can be applied to acute stroke treatment decisions. Our streamlined method also offers promise for further development of automated quantitative analysis of the ischemic penumbra. Copyright (c) 2009 Elsevier Ireland Ltd. All rights reserved.

Highly Sophisticated Virtual Laboratory Instruments in Education

NASA Astrophysics Data System (ADS)

Gaskins, T.

2006-12-01

Many areas of Science have advanced or stalled according to the ability to see what can not normally be seen. Visual understanding has been key to many of the world's greatest breakthroughs, such as discovery of DNAs double helix. Scientists use sophisticated instruments to see what the human eye can not. Light microscopes, scanning electron microscopes (SEM), spectrometers and atomic force microscopes are employed to examine and learn the details of the extremely minute. It's rare that students prior to university have access to such instruments, or are granted full ability to probe and magnify as desired. Virtual Lab, by providing highly authentic software instruments and comprehensive imagery of real specimens, provides them this opportunity. Virtual Lab's instruments let explorers operate virtual devices on a personal computer to examine real specimens. Exhaustive sets of images systematically and robotically photographed at thousands of positions and multiple magnifications and focal points allow students to zoom in and focus on the most minute detail of each specimen. Controls on each Virtual Lab device interactively and smoothly move the viewer through these images to display the specimen as the instrument saw it. Users control position, magnification, focal length, filters and other parameters. Energy dispersion spectrometry is combined with SEM imagery to enable exploration of chemical composition at minute scale and arbitrary location. Annotation capabilities allow scientists, teachers and students to indicate important features or areas. Virtual Lab is a joint project of NASA and the Beckman Institute at the University of Illinois at Urbana- Champaign. Four instruments currently compose the Virtual Lab suite: A scanning electron microscope and companion energy dispersion spectrometer, a high-power light microscope, and a scanning probe microscope that captures surface properties to the level of atoms. Descriptions of instrument operating principles and uses are also part of Virtual Lab. The Virtual Lab software and its increasingly rich collection of specimens are free to anyone. This presentation describes Virtual Lab and its uses in formal and informal education.

Computational mechanics needs study

NASA Technical Reports Server (NTRS)

Griffin, O. Hayden, Jr.

1993-01-01

In order to assess the needs in computational mechanics over the next decade, we formulated a questionnaire and contacted computational mechanics researchers and users in industry, government, and academia. As expected, we found a wide variety of computational mechanics usage and research. This report outlines the activity discussed with those contacts, as well as that in our own organizations. It should be noted that most of the contacts were made before the recent decline of the defense industry. Therefore, areas which are strongly defense-oriented may decrease in relative importance. In order to facilitate updating of this study, names of a few key researchers in each area are included as starting points for future literature surveys. These lists of names are not intended to represent those persons doing the best research in that area, nor are they intended to be comprehensive. They are, as previously stated, offered as starting points for future literature searches. Overall, there is currently a broad activity in computational mechanics in this country, with the breadth and depth increasing as more sophisticated software and faster computers become more available. The needs and desires of the workers in this field are as diverse as their background and organizational products. There seems to be some degree of software development in any organization (although the level of activity is highly variable from one organization to another) which has any research component in its mission. It seems, however, that there is considerable use of commercial software in almost all organizations. In most industrial research organizations, it appears that very little actual software development is contracted out, but that most is done in-house, using a mixture of funding sources. Government agencies vary widely in the ratio of in-house to out-house ratio. There is a considerable amount of experimental verification in most, but not all, organizations. Generally, the amount of experimental verification is more than we expected. Of all the survey contacts, one or two believe that the resources they are allocated are sufficient, but most do not. Some believe they have only half the resources they need. Some see their resource deficits as short-term, while others see it as a trend which will continue or perhaps worsen. The pessimism is stronger in the defense and aerospace industry. When considering only the nonlinear development efforts, there appears to be an even mix of geometric and material nonlinearity. There is not much particular emphasis in linear analysis unless it is in extension of current analysis capabilities to larger problems. The primary exception is concern about modeling of composites, where proven methodologies have trailed element and computer hardware development. Most of the people we spoke to use finite element techniques, but there is some finite difference and boundary element work ongoing. There is also some interest in multiple methods. Coupling of finite elements and boundary elements appears to be of high interest, since the two analysis types are complementary.

Development of Course Material in a Multi-Author Environment

ERIC Educational Resources Information Center

Schlotter, Michael

2009-01-01

Software for text processing and presentation design is becoming increasingly sophisticated. Nevertheless, it is difficult to find a good solution for collaborative writing of technical course material, allowing the creation of high quality lecture notes and presentation slides from a single source. This article presents a new editing framework…

Aircrew Training Devices: Utility and Utilization of Advanced Instructional Features (Phase IV--Summary Report).

ERIC Educational Resources Information Center

Polzella, Donald J.; And Others

Modern aircrew training devices (ATDs) are equipped with sophisticated hardware and software capabilities, known as advanced instructional features (AIFs), that permit a simulator instructor to prepare briefings, manage training, vary task difficulty/fidelity, monitor performance, and provide feedback for flight simulation training missions. The…

Refining an Automated Transcranial Doppler System for the Detection of Vasospasm after Traumatic Brain Injury

DTIC Science & Technology

2015-11-01

examples of paired physiology and ultrasound models are given by Rune Aaslid and David H Evans. Aaslid offers [19] a sophisticated but proprietary... Rune Aaslid commercial software avalible from http://www.transcranial.com/ [20] Sunghan Kim, Mateo Aboy, James McNames, Pulse pressure variation

Teaching Basic Quantum Mechanics in Secondary School Using Concepts of Feynman Path Integrals Method

ERIC Educational Resources Information Center

Fanaro, Maria de los Angeles; Otero, Maria Rita; Arlego, Marcelo

2012-01-01

This paper discusses the teaching of basic quantum mechanics in high school. Rather than following the usual formalism, our approach is based on Feynman's path integral method. Our presentation makes use of simulation software and avoids sophisticated mathematical formalism. (Contains 3 figures.)

Strategic Choices for Data Communications Systems.

ERIC Educational Resources Information Center

Arns, Robert G.; Urban, Patricia A.

Issues and strategies for developing a campus data communications system are discussed. It is suggested that individual microcomputer (MC) workstations will occasionally have a need for (1) access, via a data communications network, to a more powerful processor; (2) specialized software; (3) sophisticated output devices; (4) central data sets; or…

Digital Movement Analysis in Physical Education

ERIC Educational Resources Information Center

Trout, Josh

2013-01-01

Mobile devices such as smartphones and tablets offer applications (apps) that make digital movement analysis simple and efficient in physical education. Highly sophisticated movement analysis software has been available for many years but has mainly appealed to coaches of elite athletes and biomechanists. Apps on mobile devices are less expensive…

Interactive Communication by Applying Contemporary Media in Higher Education

ERIC Educational Resources Information Center

Tatkovic, Nevenka; Ruzic, Maja

2005-01-01

Today society has become a multimedia society, turned towards new forms of communication, ready for changes and the new communicational challenges. The students, surrounded by PCs, mobile phones and ever so sophisticated software, videos, wireless sets and TVs, DVDs, satellite transmissions and "the media above all other media"--the…

The microcomputer scientific software series 2: general linear model--regression.

Treesearch

Harold M. Rauscher

1983-01-01

The general linear model regression (GLMR) program provides the microcomputer user with a sophisticated regression analysis capability. The output provides a regression ANOVA table, estimators of the regression model coefficients, their confidence intervals, confidence intervals around the predicted Y-values, residuals for plotting, a check for multicollinearity, a...

CONTENTdm Digital Collection Management Software and End-User Efficacy

ERIC Educational Resources Information Center

Dickson, Maggie

2008-01-01

Digital libraries and collections are a growing facet of today's traditional library. Digital library technologies have become increasingly more sophisticated in the effort to provide more and better access to the collections they contain. The evaluation of the usability of these technologies has not kept pace with technological developments,…

Goals and Objectives for Computing in the Associated Colleges of the St. Lawrence Valley.

ERIC Educational Resources Information Center

Grupe, Fritz H.

A forecast of the computing requirements of the Associated Colleges of the St. Lawrence Valley, an analysis of their needs, and specifications for a joint computer system are presented. Problems encountered included the lack of resources and computer sophistication at the member schools and a dearth of experience with long-term computer consortium…

48 CFR 227.7203-17 - Overseas contracts with foreign sources.

Code of Federal Regulations, 2013 CFR

2013-10-01

... COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-17 Overseas contracts with foreign sources. (a) The clause at 252.227-7032, Rights in Technical Data and Computer Software... Noncommercial Computer Software and Noncommercial Computer Software Documentation, when the Government requires...

48 CFR 227.7203-17 - Overseas contracts with foreign sources.

Code of Federal Regulations, 2010 CFR

2010-10-01

... COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-17 Overseas contracts with foreign sources. (a) The clause at 252.227-7032, Rights in Technical Data and Computer Software... Noncommercial Computer Software and Noncommercial Computer Software Documentation, when the Government requires...

48 CFR 227.7203-17 - Overseas contracts with foreign sources.

Code of Federal Regulations, 2014 CFR

2014-10-01

... COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-17 Overseas contracts with foreign sources. (a) The clause at 252.227-7032, Rights in Technical Data and Computer Software... Noncommercial Computer Software and Noncommercial Computer Software Documentation, when the Government requires...

48 CFR 227.7203-17 - Overseas contracts with foreign sources.

Code of Federal Regulations, 2011 CFR

2011-10-01

... COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-17 Overseas contracts with foreign sources. (a) The clause at 252.227-7032, Rights in Technical Data and Computer Software... Noncommercial Computer Software and Noncommercial Computer Software Documentation, when the Government requires...

48 CFR 227.7203-17 - Overseas contracts with foreign sources.

Code of Federal Regulations, 2012 CFR

2012-10-01

... COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-17 Overseas contracts with foreign sources. (a) The clause at 252.227-7032, Rights in Technical Data and Computer Software... Noncommercial Computer Software and Noncommercial Computer Software Documentation, when the Government requires...

Approaches for scalable modeling and emulation of cyber systems : LDRD final report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayo, Jackson R.; Minnich, Ronald G.; Armstrong, Robert C.

2009-09-01

The goal of this research was to combine theoretical and computational approaches to better understand the potential emergent behaviors of large-scale cyber systems, such as networks of {approx} 10{sup 6} computers. The scale and sophistication of modern computer software, hardware, and deployed networked systems have significantly exceeded the computational research community's ability to understand, model, and predict current and future behaviors. This predictive understanding, however, is critical to the development of new approaches for proactively designing new systems or enhancing existing systems with robustness to current and future cyber threats, including distributed malware such as botnets. We have developed preliminarymore » theoretical and modeling capabilities that can ultimately answer questions such as: How would we reboot the Internet if it were taken down? Can we change network protocols to make them more secure without disrupting existing Internet connectivity and traffic flow? We have begun to address these issues by developing new capabilities for understanding and modeling Internet systems at scale. Specifically, we have addressed the need for scalable network simulation by carrying out emulations of a network with {approx} 10{sup 6} virtualized operating system instances on a high-performance computing cluster - a 'virtual Internet'. We have also explored mappings between previously studied emergent behaviors of complex systems and their potential cyber counterparts. Our results provide foundational capabilities for further research toward understanding the effects of complexity in cyber systems, to allow anticipating and thwarting hackers.« less

TRENT2D WG: a smart web infrastructure for debris-flow modelling and hazard assessment

NASA Astrophysics Data System (ADS)

Zorzi, Nadia; Rosatti, Giorgio; Zugliani, Daniel; Rizzi, Alessandro; Piffer, Stefano

2016-04-01

Mountain regions are naturally exposed to geomorphic flows, which involve large amounts of sediments and induce significant morphological modifications. The physical complexity of this class of phenomena represents a challenging issue for modelling, leading to elaborate theoretical frameworks and sophisticated numerical techniques. In general, geomorphic-flows models proved to be valid tools in hazard assessment and management. However, model complexity seems to represent one of the main obstacles to the diffusion of advanced modelling tools between practitioners and stakeholders, although the UE Flood Directive (2007/60/EC) requires risk management and assessment to be based on "best practices and best available technologies". Furthermore, several cutting-edge models are not particularly user-friendly and multiple stand-alone software are needed to pre- and post-process modelling data. For all these reasons, users often resort to quicker and rougher approaches, leading possibly to unreliable results. Therefore, some effort seems to be necessary to overcome these drawbacks, with the purpose of supporting and encouraging a widespread diffusion of the most reliable, although sophisticated, modelling tools. With this aim, this work presents TRENT2D WG, a new smart modelling solution for the state-of-the-art model TRENT2D (Armanini et al., 2009, Rosatti and Begnudelli, 2013), which simulates debris flows and hyperconcentrated flows adopting a two-phase description over a mobile bed. TRENT2D WG is a web infrastructure joining advantages offered by the software-delivering model SaaS (Software as a Service) and by WebGIS technology and hosting a complete and user-friendly working environment for modelling. In order to develop TRENT2D WG, the model TRENT2D was converted into a service and exposed on a cloud server, transferring computational burdens from the user hardware to a high-performing server and reducing computational time. Then, the system was equipped with an interface supporting Web-based GIS functionalities, making the model accessible through the World Wide Web. Furthermore, WebGIS technology allows georeferenced model input data and simulation results to be produced, managed, displayed and processed in a unique and intuitive working environment. Thanks to its large flexibility, TRENT2D WG was equipped also with a BUWAL-type procedure (Heinimann et al., 1998) to assess and map debris-flow hazard. In this way, model results can be used straightforwardly as input data of the hazard-mapping procedure, avoiding work fragmentation and taking wide advantage of the functionalities offered by WebGIS technology. TRENT2D WG is intended to become a reliable tool for researchers, practitioners and stakeholders, supporting modelling and hazard mapping effectively and encouraging connections between the research field and professional needs at a working scale.

Technological Advances in Deep Brain Stimulation.

PubMed

Ughratdar, Ismail; Samuel, Michael; Ashkan, Keyoumars

2015-01-01

Functional and stereotactic neurosurgery has always been regarded as a subspecialty based on and driven by technological advances. However until recently, the fundamentals of deep brain stimulation (DBS) hardware and software design had largely remained stagnant since its inception almost three decades ago. Recent improved understanding of disease processes in movement disorders as well clinician and patient demands has resulted in new avenues of development for DBS technology. This review describes new advances both related to hardware and software for neuromodulation. New electrode designs with segmented contacts now enable sophisticated shaping and sculpting of the field of stimulation, potentially allowing multi-target stimulation and avoidance of side effects. To avoid lengthy programming sessions utilising multiple lead contacts, new user-friendly software allows for computational modelling and individualised directed programming. Therapy delivery is being improved with the next generation of smaller profile, longer-lasting, re-chargeable implantable pulse generators (IPGs). These include IPGs capable of delivering constant current stimulation or personalised closed-loop adaptive stimulation. Post-implantation Magnetic Resonance Imaging (MRI) has long been an issue which has been partially overcome with 'MRI conditional devices' and has enabled verification of DBS lead location. Surgical technique is considering a shift from frame-based to frameless stereotaxy or greater role for robot assisted implantation. The challenge for these contemporary techniques however, will be in demonstrating equivalent safety and accuracy to conventional methods. We also discuss potential future direction utilising wireless technology allowing for miniaturisation of hardware.

JAMI: a Java library for molecular interactions and data interoperability.

PubMed

Sivade Dumousseau, M; Koch, M; Shrivastava, A; Alonso-López, D; De Las Rivas, J; Del-Toro, N; Combe, C W; Meldal, B H M; Heimbach, J; Rappsilber, J; Sullivan, J; Yehudi, Y; Orchard, S

2018-04-11

A number of different molecular interactions data download formats now exist, designed to allow access to these valuable data by diverse user groups. These formats include the PSI-XML and MITAB standard interchange formats developed by Molecular Interaction workgroup of the HUPO-PSI in addition to other, use-specific downloads produced by other resources. The onus is currently on the user to ensure that a piece of software is capable of read/writing all necessary versions of each format. This problem may increase, as data providers strive to meet ever more sophisticated user demands and data types. A collaboration between EMBL-EBI and the University of Cambridge has produced JAMI, a single library to unify standard molecular interaction data formats such as PSI-MI XML and PSI-MITAB. The JAMI free, open-source library enables the development of molecular interaction computational tools and pipelines without the need to produce different versions of software to read different versions of the data formats. Software and tools developed on top of the JAMI framework are able to integrate and support both PSI-MI XML and PSI-MITAB. The use of JAMI avoids the requirement to chain conversions between formats in order to reach a desired output format and prevents code and unit test duplication as the code becomes more modular. JAMI's model interfaces are abstracted from the underlying format, hiding the complexity and requirements of each data format from developers using JAMI as a library.

Logic via Computer Programming.

ERIC Educational Resources Information Center

Wieschenberg, Agnes A.

This paper proposed the question "How do we teach logical thinking and sophisticated mathematics to unsophisticated college students?" One answer among many is through the writing of computer programs. The writing of computer algorithms is mathematical problem solving and logic in disguise and it may attract students who would otherwise stop…

Prior Consent: Not-So-Strange Bedfellows Plan Library/Computing Partnerships.

ERIC Educational Resources Information Center

McDonough, Kristin

The increasing sophistication of information technologies and the nearly universal access to computing have blurred distinctions among information delivery units on college campuses, forcing institutions to rethink the separate organizational structures that evolved when computing in academe was more localized and less prevalent. Experiences in…

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

BIRCH: a user-oriented, locally-customizable, bioinformatics system.

PubMed

Fristensky, Brian

2007-02-09

Molecular biologists need sophisticated analytical tools which often demand extensive computational resources. While finding, installing, and using these tools can be challenging, pipelining data from one program to the next is particularly awkward, especially when using web-based programs. At the same time, system administrators tasked with maintaining these tools do not always appreciate the needs of research biologists. BIRCH (Biological Research Computing Hierarchy) is an organizational framework for delivering bioinformatics resources to a user group, scaling from a single lab to a large institution. The BIRCH core distribution includes many popular bioinformatics programs, unified within the GDE (Genetic Data Environment) graphic interface. Of equal importance, BIRCH provides the system administrator with tools that simplify the job of managing a multiuser bioinformatics system across different platforms and operating systems. These include tools for integrating locally-installed programs and databases into BIRCH, and for customizing the local BIRCH system to meet the needs of the user base. BIRCH can also act as a front end to provide a unified view of already-existing collections of bioinformatics software. Documentation for the BIRCH and locally-added programs is merged in a hierarchical set of web pages. In addition to manual pages for individual programs, BIRCH tutorials employ step by step examples, with screen shots and sample files, to illustrate both the important theoretical and practical considerations behind complex analytical tasks. BIRCH provides a versatile organizational framework for managing software and databases, and making these accessible to a user base. Because of its network-centric design, BIRCH makes it possible for any user to do any task from anywhere.

BIRCH: A user-oriented, locally-customizable, bioinformatics system

PubMed Central

Fristensky, Brian

2007-01-01

Background Molecular biologists need sophisticated analytical tools which often demand extensive computational resources. While finding, installing, and using these tools can be challenging, pipelining data from one program to the next is particularly awkward, especially when using web-based programs. At the same time, system administrators tasked with maintaining these tools do not always appreciate the needs of research biologists. Results BIRCH (Biological Research Computing Hierarchy) is an organizational framework for delivering bioinformatics resources to a user group, scaling from a single lab to a large institution. The BIRCH core distribution includes many popular bioinformatics programs, unified within the GDE (Genetic Data Environment) graphic interface. Of equal importance, BIRCH provides the system administrator with tools that simplify the job of managing a multiuser bioinformatics system across different platforms and operating systems. These include tools for integrating locally-installed programs and databases into BIRCH, and for customizing the local BIRCH system to meet the needs of the user base. BIRCH can also act as a front end to provide a unified view of already-existing collections of bioinformatics software. Documentation for the BIRCH and locally-added programs is merged in a hierarchical set of web pages. In addition to manual pages for individual programs, BIRCH tutorials employ step by step examples, with screen shots and sample files, to illustrate both the important theoretical and practical considerations behind complex analytical tasks. Conclusion BIRCH provides a versatile organizational framework for managing software and databases, and making these accessible to a user base. Because of its network-centric design, BIRCH makes it possible for any user to do any task from anywhere. PMID:17291351

48 CFR 227.7203-1 - Policy.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-1 Policy. (a) DoD policy is to acquire only the computer software and computer software documentation, and the rights in such software or documentation, necessary...

48 CFR 227.7203-1 - Policy.

Code of Federal Regulations, 2011 CFR

2011-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-1 Policy. (a) DoD policy is to acquire only the computer software and computer software documentation, and the rights in such software or documentation, necessary...

48 CFR 227.7203-1 - Policy.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-1 Policy. (a) DoD policy is to acquire only the computer software and computer software documentation, and the rights in such software or documentation, necessary...

48 CFR 227.7203-1 - Policy.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-1 Policy. (a) DoD policy is to acquire only the computer software and computer software documentation, and the rights in such software or documentation, necessary...

48 CFR 227.7203-1 - Policy.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-1 Policy. (a) DoD policy is to acquire only the computer software and computer software documentation, and the rights in such software or documentation, necessary...

48 CFR 227.7205 - Contracts for special works.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Computer Software and Computer Software Documentation 227.7205 Contracts for special works. (a) Use the... a specific need to control the distribution of computer software or computer software documentation..., modification, reproduction, release, performance, display, or disclosure of such software or documentation. Use...

48 CFR 227.7205 - Contracts for special works.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Computer Software and Computer Software Documentation 227.7205 Contracts for special works. (a) Use the... a specific need to control the distribution of computer software or computer software documentation..., modification, reproduction, release, performance, display, or disclosure of such software or documentation. Use...

Reproducible research in vadose zone sciences

USDA-ARS?s Scientific Manuscript database

A significant portion of present-day soil and Earth science research is computational, involving complex data analysis pipelines, advanced mathematical and statistical models, and sophisticated computer codes. Opportunities for scientific progress are greatly diminished if reproducing and building o...

Climate Science Communications - Video Visualization Techniques

NASA Astrophysics Data System (ADS)

Reisman, J. P.; Mann, M. E.

2010-12-01

Communicating Climate science is challenging due to it's complexity. But as they say, a picture is worth a thousand words. Visualization techniques can be merely graphical or combine multimedia so as to make graphs come alive in context with other visual and auditory cues. This can also make the information come alive in a way that better communicates what the science is all about. What types of graphics to use depends on your audience, some graphs are great for scientists but if you are trying to communicate to a less sophisticated audience, certain visuals translate information in a more easily perceptible manner. Hollywood techniques and style can be applied to these graphs to give them even more impact. Video is one of the most powerful communication tools in its ability to combine visual and audio through time. Adding music and visual cues such as pans and zooms can greatly enhance the ability to communicate your concepts. Video software ranges from relatively simple to very sophisticated. In reality, you don't need the best tools to get your point across. In fact, with relatively inexpensive software, you can put together powerful videos that more effectively convey the science you are working on with greater sophistication, and in an entertaining way. We will examine some basic techniques to increase the quality of video visualization to make it more effective in communicating complexity. If a picture is worth a thousand words, a decent video with music, and a bit of narration is priceless.

Experience with a sophisticated computer based authoring system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gardner, P.R.

1984-04-01

In the November 1982 issue of ADCIS SIG CBT Newsletter the editor arrives at two conclusions regarding Computer Based Authoring Systems (CBAS): (1) CBAS drastically reduces programming time and the need for expert programmers, and (2) CBAS appears to have minimal impact on initial lesson design. Both of these comments have significant impact on any Cost-Benefit analysis for Computer-Based Training. The first tends to improve cost-effectiveness but only toward the limits imposed by the second. Westinghouse Hanford Company (WHC) recently purchased a sophisticated CBAS, the WISE/SMART system from Wicat (Orem, UT), for use in the Nuclear Power Industry. This reportmore » details our experience with this system relative to Items (1) and (2) above; lesson design time will be compared with lesson input time. Also provided will be the WHC experience in the use of subject matter experts (though computer neophytes) for the design and inputting of CBT materials.« less

PREFACE: Euro-TMCS I: Theory, Modelling and Computational Methods for Semiconductors

NASA Astrophysics Data System (ADS)

Gómez-Campos, F. M.; Rodríguez-Bolívar, S.; Tomić, S.

2015-05-01

The present issue contains a selection of the best contributed works presented at the first Euro-TMCS conference (Theory, Modelling and Computational Methods for Semiconductors, European Session). The conference was held at Faculty of Sciences, Universidad de Granada, Spain on 28st-30st January 2015. This conference is the first European edition of the TMCS conference series which started in 2008 at the University of Manchester and has always been held in the United Kingdom. Four previous conferences have been previously carried out (Manchester 2008, York 2010, Leeds 2012 and Salford 2014). Euro-TMCS is run for three days; the first one devoted to giving invited tutorials, aimed particularly at students, on recent development of theoretical methods. On this occasion the session was focused on the presentation of widely-used computational methods for the modelling of physical processes in semiconductor materials. Freely available simulation software (SIESTA, Quantum Espresso and Yambo) as well as commercial software (TiberCad and MedeA) were presented in the conference by members of their development team, offering to the audience an overview of their capabilities for research. The second part of the conference showcased prestigious invited and contributed oral presentations, alongside poster sessions, in which direct discussion with authors was promoted. The scope of this conference embraces modelling, theory and the use of sophisticated computational tools in semiconductor science and technology. Theoretical approaches represented in this meeting included: Density Functional Theory, Semi-empirical Electronic Structure Methods, Multi-scale Approaches, Modelling of PV devices, Electron Transport, and Graphene. Topics included, but were not limited to: Optical Properties of Quantum Nanostructures including Colloids and Nanotubes, Plasmonics, Magnetic Semiconductors, Photonic Structures, and Electronic Devices. The Editors Acknowledgments: We would like to thank all participants for making this a very successful meeting and for their contribution to the conference programme and these proceedings. We would also like to acknowledge the financial support from Universidad de Granada, the CECAM UK-Hartree Node, project TEC2013-47283-R of Ministerio de Economía y Competitividad, and the company Materials Design (distributors of MedeA Software). Conference Organising Committee: Francisco M. Gómez-Campos (Co-chair, Universidad de Granada) Salvador Rodríguez-Bolívar (Co-chair, Universidad de Granada) Stanko Tomić (Co-chair, University of Salford)

Structural Analysis Made 'NESSUSary'

NASA Technical Reports Server (NTRS)

2005-01-01

Everywhere you look, chances are something that was designed and tested by a computer will be in plain view. Computers are now utilized to design and test just about everything imaginable, from automobiles and airplanes to bridges and boats, and elevators and escalators to streets and skyscrapers. Computer-design engineering first emerged in the 1970s, in the automobile and aerospace industries. Since computers were in their infancy, however, architects and engineers during the time were limited to producing only designs similar to hand-drafted drawings. (At the end of 1970s, a typical computer-aided design system was a 16-bit minicomputer with a price tag of $125,000.) Eventually, computers became more affordable and related software became more sophisticated, offering designers the "bells and whistles" to go beyond the limits of basic drafting and rendering, and venture into more skillful applications. One of the major advancements was the ability to test the objects being designed for the probability of failure. This advancement was especially important for the aerospace industry, where complicated and expensive structures are designed. The ability to perform reliability and risk assessment without using extensive hardware testing is critical to design and certification. In 1984, NASA initiated the Probabilistic Structural Analysis Methods (PSAM) project at Glenn Research Center to develop analysis methods and computer programs for the probabilistic structural analysis of select engine components for current Space Shuttle and future space propulsion systems. NASA envisioned that these methods and computational tools would play a critical role in establishing increased system performance and durability, and assist in structural system qualification and certification. Not only was the PSAM project beneficial to aerospace, it paved the way for a commercial risk- probability tool that is evaluating risks in diverse, down- to-Earth application

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The Second SIAM Conference on Computational Science and Engineering was held in San Diego from February 10-12, 2003. Total conference attendance was 553. This is a 23% increase in attendance over the first conference. The focus of this conference was to draw attention to the tremendous range of major computational efforts on large problems in science and engineering, to promote the interdisciplinary culture required to meet these large-scale challenges, and to encourage the training of the next generation of computational scientists. Computational Science & Engineering (CS&E) is now widely accepted, along with theory and experiment, as a crucial third modemore » of scientific investigation and engineering design. Aerospace, automotive, biological, chemical, semiconductor, and other industrial sectors now rely on simulation for technical decision support. For federal agencies also, CS&E has become an essential support for decisions on resources, transportation, and defense. CS&E is, by nature, interdisciplinary. It grows out of physical applications and it depends on computer architecture, but at its heart are powerful numerical algorithms and sophisticated computer science techniques. From an applied mathematics perspective, much of CS&E has involved analysis, but the future surely includes optimization and design, especially in the presence of uncertainty. Another mathematical frontier is the assimilation of very large data sets through such techniques as adaptive multi-resolution, automated feature search, and low-dimensional parameterization. The themes of the 2003 conference included, but were not limited to: Advanced Discretization Methods; Computational Biology and Bioinformatics; Computational Chemistry and Chemical Engineering; Computational Earth and Atmospheric Sciences; Computational Electromagnetics; Computational Fluid Dynamics; Computational Medicine and Bioengineering; Computational Physics and Astrophysics; Computational Solid Mechanics and Materials; CS&E Education; Meshing and Adaptivity; Multiscale and Multiphysics Problems; Numerical Algorithms for CS&E; Discrete and Combinatorial Algorithms for CS&E; Inverse Problems; Optimal Design, Optimal Control, and Inverse Problems; Parallel and Distributed Computing; Problem-Solving Environments; Software and Wddleware Systems; Uncertainty Estimation and Sensitivity Analysis; and Visualization and Computer Graphics.« less

Using Interactive Computer to Communicate Scientific Information.

ERIC Educational Resources Information Center

Selnow, Gary W.

1988-01-01

Asks whether the computer is another channel of communication, if its interactive qualities make it an information source, or if it is an undefined hybrid. Concludes that computers are neither the medium nor the source but will in the future provide the possibility of a sophisticated interaction between human intelligence and artificial…

How You Can Protect Public Access Computers "and" Their Users

ERIC Educational Resources Information Center

Huang, Phil

2007-01-01

By providing the public with online computing facilities, librarians make available a world of information resources beyond their traditional print materials. Internet-connected computers in libraries greatly enhance the opportunity for patrons to enjoy the benefits of the digital age. Unfortunately, as hackers become more sophisticated and…

Visualization of bioelectric phenomena.

PubMed

Palmer, T C; Simpson, E V; Kavanagh, K M; Smith, W M

1992-01-01

Biomedical investigators are currently able to acquire and analyze physiological and anatomical data from three-dimensional structures in the body. Often, multiple kinds of data can be recorded simultaneously. The usefulness of this information, either for exploratory viewing or for presentation to others, is limited by the lack of techniques to display it in intuitive, accessible formats. Unfortunately, the complexity of scientific visualization techniques and the inflexibility of commercial packages deter investigators from using sophisticated visualization methods that could provide them added insight into the mechanisms of the phenomena under study. Also, the sheer volume of such data is a problem. High-performance computing resources are often required for storage and processing, in addition to visualization. This chapter describes a novel, language-based interface that allows scientists with basic programming skills to classify and render multivariate volumetric data with a modest investment in software training. The interface facilitates data exploration by enabling experimentation with various algorithms to compute opacity and color from volumetric data. The value of the system is demonstrated using data from cardiac mapping studies, in which multiple electrodes are placed in an on the heart to measure the cardiac electrical activity intrinsic to the heart and its response to external stimulation.

Computational Tools and Algorithms for Designing Customized Synthetic Genes

PubMed Central

Gould, Nathan; Hendy, Oliver; Papamichail, Dimitris

2014-01-01

Advances in DNA synthesis have enabled the construction of artificial genes, gene circuits, and genomes of bacterial scale. Freedom in de novo design of synthetic constructs provides significant power in studying the impact of mutations in sequence features, and verifying hypotheses on the functional information that is encoded in nucleic and amino acids. To aid this goal, a large number of software tools of variable sophistication have been implemented, enabling the design of synthetic genes for sequence optimization based on rationally defined properties. The first generation of tools dealt predominantly with singular objectives such as codon usage optimization and unique restriction site incorporation. Recent years have seen the emergence of sequence design tools that aim to evolve sequences toward combinations of objectives. The design of optimal protein-coding sequences adhering to multiple objectives is computationally hard, and most tools rely on heuristics to sample the vast sequence design space. In this review, we study some of the algorithmic issues behind gene optimization and the approaches that different tools have adopted to redesign genes and optimize desired coding features. We utilize test cases to demonstrate the efficiency of each approach, as well as identify their strengths and limitations. PMID:25340050

48 CFR 227.7203-6 - Contract clauses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Software and Computer Software Documentation 227.7203-6 Contract clauses. (a)(1) Use the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, in solicitations and contracts when the successful offeror(s) will be required to deliver computer software or...

48 CFR 227.7203-6 - Contract clauses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Software and Computer Software Documentation 227.7203-6 Contract clauses. (a)(1) Use the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, in solicitations and contracts when the successful offeror(s) will be required to deliver computer software or...

48 CFR 227.7203-6 - Contract clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Software and Computer Software Documentation 227.7203-6 Contract clauses. (a)(1) Use the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, in solicitations and contracts when the successful offeror(s) will be required to deliver computer software or...

48 CFR 227.7203-6 - Contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Software and Computer Software Documentation 227.7203-6 Contract clauses. (a)(1) Use the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, in solicitations and contracts when the successful offeror(s) will be required to deliver computer software or...

48 CFR 227.7203-6 - Contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Software and Computer Software Documentation 227.7203-6 Contract clauses. (a)(1) Use the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, in solicitations and contracts when the successful offeror(s) will be required to deliver computer software or...

Model-Driven Development of Interactive Multimedia Applications with MML

NASA Astrophysics Data System (ADS)

Pleuss, Andreas; Hussmann, Heinrich

There is an increasing demand for high-quality interactive applications which combine complex application logic with a sophisticated user interface, making use of individual media objects like graphics, animations, 3D graphics, audio or video. Their development is still challenging as it requires the integration of software design, user interface design, and media design.

Assistive Potencies: Reconfiguring the Scholarly Edition in an Electronic Setting

ERIC Educational Resources Information Center

Lyman, Eugene William

2009-01-01

This dissertation makes the claim that electronic scholarly editions have the potential to produce more reliable scholarly texts than their print-based antecedents. It consists of an introduction, four chapters, and a brief conclusion. It originated in my work creating the Elwood Viewer, a sophisticated software browser written to display TEI…

The Joint Tactical Aerial Resupply Vehicle Impact on Sustainment Operations

DTIC Science & Technology

2017-06-09

Artificial Intelligence , Sustainment Operations, Rifle Company, Autonomous Aerial Resupply, Joint Tactical Autonomous Aerial Resupply System 16...Integrations and Development System AI Artificial Intelligence ARCIC Army Capabilities Integration Center ARDEC Armament Research, Development and...semi- autonomous systems, and fully autonomous systems. Autonomy of machines depends on sophisticated software, including Artificial Intelligence

HUC--A User Designed System for All Recorded Knowledge and Information.

ERIC Educational Resources Information Center

Hilton, Howard J.

This paper proposes a user designed system, HUC, intended to provide a single index and retrieval system covering all recorded knowledge and information capable of being retrieved from all modes of storage, from manual to the most sophisticated retrieval system. The concept integrates terminal hardware, software, and database structure to allow…

Security Systems Commissioning: An Old Trick for Your New Dog

ERIC Educational Resources Information Center

Black, James R.

2009-01-01

Sophisticated, software-based security systems can provide powerful tools to support campus security. By nature, such systems are flexible, with many capabilities that can help manage the process of physical protection. However, the full potential of these systems can be overlooked because of unfamiliarity with the products, weaknesses in security…

A Multi-Language System for Knowledge Extraction in E-Learning Videos

ERIC Educational Resources Information Center

Sood, Aparesh; Mittal, Ankush; Sarthi, Divya

2006-01-01

The existing multimedia software in E-Learning does not provide par excellence multimedia data service to the common user, hence E-Learning services are still short of intelligence and sophisticated end user tools for visualization and retrieval. An efficient approach to achieve the tasks such as, regional language narration, regional language…

More than meets the eye: digital fraud in dentistry.

PubMed

Rao, S A; Singh, N; Kumar, R; Thomas, A M

2010-01-01

Digital photographs play a substantial role in the presentation and validation of clinical cases for documentation and research purposes in esthetically oriented professions such as dentistry. The introduction of sophisticated cameras and "easy to use" computer software readily available on today's market has enabled digital fraud to emerge as a common and widely used practice. Hence, it is essential that both dentists and editorial circles are aware and cautious with regard to the possibility of digital fraud. A set of 10 routine "pre-" and "post" treatment dental procedure photographs were taken and randomly manipulated using standard desktop software. A team of 10 dental professionals were selected and each one of them was individually requested to review and evaluate the authenticity of the photographs. An assessment of expert opinion revealed an overall sensitivity of 60% and a sensitivity of 15% in correctly identifying a manipulated photograph, which is considered low. Furthermore, there was poor interobserver agreement. Advanced technology that is easily available has resulted in adept digital fraud that is difficult to detect. There is a need for awareness among both dental practitioners and the editorial circle regarding misrepresentation due to image manipulation. It is therefore necessary to follow a skeptical approach in the assessment of digitalized photos used in research and as a part of clinical dentistry.

Feature extraction and classification of clouds in high resolution panchromatic satellite imagery

NASA Astrophysics Data System (ADS)

Sharghi, Elan

The development of sophisticated remote sensing sensors is rapidly increasing, and the vast amount of satellite imagery collected is too much to be analyzed manually by a human image analyst. It has become necessary for a tool to be developed to automate the job of an image analyst. This tool would need to intelligently detect and classify objects of interest through computer vision algorithms. Existing software called the Rapid Image Exploitation Resource (RAPIER®) was designed by engineers at Space and Naval Warfare Systems Center Pacific (SSC PAC) to perform exactly this function. This software automatically searches for anomalies in the ocean and reports the detections as a possible ship object. However, if the image contains a high percentage of cloud coverage, a high number of false positives are triggered by the clouds. The focus of this thesis is to explore various feature extraction and classification methods to accurately distinguish clouds from ship objects. An examination of a texture analysis method, line detection using the Hough transform, and edge detection using wavelets are explored as possible feature extraction methods. The features are then supplied to a K-Nearest Neighbors (KNN) or Support Vector Machine (SVM) classifier. Parameter options for these classifiers are explored and the optimal parameters are determined.

Experiment Software and Projects on the Web with VISPA

NASA Astrophysics Data System (ADS)

Erdmann, M.; Fischer, B.; Fischer, R.; Geiser, E.; Glaser, C.; Müller, G.; Rieger, M.; Urban, M.; von Cube, R. F.; Welling, C.

2017-10-01

The Visual Physics Analysis (VISPA) project defines a toolbox for accessing software via the web. It is based on latest web technologies and provides a powerful extension mechanism that enables to interface a wide range of applications. Beyond basic applications such as a code editor, a file browser, or a terminal, it meets the demands of sophisticated experiment-specific use cases that focus on physics data analyses and typically require a high degree of interactivity. As an example, we developed a data inspector that is capable of browsing interactively through event content of several data formats, e.g., MiniAOD which is utilized by the CMS collaboration. The VISPA extension mechanism can also be used to embed external web-based applications that benefit from dynamic allocation of user-defined computing resources via SSH. For example, by wrapping the JSROOT project, ROOT files located on any remote machine can be inspected directly through a VISPA server instance. We introduced domains that combine groups of users and role-based permissions. Thereby, tailored projects are enabled, e.g. for teaching where access to student’s homework is restricted to a team of tutors, or for experiment-specific data that may only be accessible for members of the collaboration. We present the extension mechanism including corresponding applications and give an outlook onto the new permission system.

The Particle Physics Playground website: tutorials and activities using real experimental data

NASA Astrophysics Data System (ADS)

Bellis, Matthew; CMS Collaboration

2016-03-01

The CERN Open Data Portal provides access to data from the LHC experiments to anyone with the time and inclination to learn the analysis procedures. The CMS experiment has made a significant amount of data availible in basically the same format the collaboration itself uses, along with software tools and a virtual enviroment in which to run those tools. These same data have also been mined for educational exercises that range from very simple .csv files that can be analyzed in a spreadsheet to more sophisticated formats that use ROOT, a dominant software package in experimental particle physics but not used as much in the general computing community. This talk will present the Particle Physics Playground website (http://particle-physics-playground.github.io/), a project that uses data from the CMS experiment, as well as the older CLEO experiment, in tutorials and exercises aimed at high school and undergraduate students and other science enthusiasts. The data are stored as text files and the users are provided with starter Python/Jupyter notebook programs and accessor functions which can be modified to perform fairly high-level analyses. The status of the project, success stories, and future plans for the website will be presented. This work was supported in part by NSF Grant PHY-1307562.

Implementing Computer Algebra Enabled Questions for the Assessment and Learning of Mathematics

ERIC Educational Resources Information Center

Sangwin, Christopher J.; Naismith, Laura

2008-01-01

We present principles for the design of an online system to support computer algebra enabled questions for use within the teaching and learning of mathematics in higher education. The introduction of a computer algebra system (CAS) into a computer aided assessment (CAA) system affords sophisticated response processing of student provided answers.…

48 CFR 52.227-14 - Rights in Data-General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... software. Computer software—(1) Means (i) Computer programs that comprise a series of instructions, rules... or computer software documentation. Computer software documentation means owner's manuals, user's... medium, that explain the capabilities of the computer software or provide instructions for using the...

48 CFR 227.7203-9 - Copyright.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Software and Computer Software Documentation 227.7203-9 Copyright. (a) Copyright license. (1) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software... Government to reproduce the software or documentation, distribute copies, perform or display the software or...

48 CFR 227.7203-9 - Copyright.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Software and Computer Software Documentation 227.7203-9 Copyright. (a) Copyright license. (1) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software... Government to reproduce the software or documentation, distribute copies, perform or display the software or...

48 CFR 227.7203-9 - Copyright.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Software and Computer Software Documentation 227.7203-9 Copyright. (a) Copyright license. (1) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software... Government to reproduce the software or documentation, distribute copies, perform or display the software or...

48 CFR 227.7203-9 - Copyright.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Software and Computer Software Documentation 227.7203-9 Copyright. (a) Copyright license. (1) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software... Government to reproduce the software or documentation, distribute copies, perform or display the software or...

48 CFR 227.7203-9 - Copyright.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Software and Computer Software Documentation 227.7203-9 Copyright. (a) Copyright license. (1) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software... Government to reproduce the software or documentation, distribute copies, perform or display the software or...

Evolution of Computational Toxicology-from Primitive ...

EPA Pesticide Factsheets

Presentation at the Health Canada seminar in Ottawa, ON, Canada on Nov. 15. 2016 Presentation at the Health Canada seminar in Ottawa, ON, Canada on Nov. 15. 2016 on the Evolution of Computational Toxicology-from Primitive Beginnings to Sophisticated Application

Evaluating coastal and river valley communities evacuation network performance using macroscopic productivity.

DOT National Transportation Integrated Search

2017-06-30

The ever-increasing processing speed and computational power of computers and simulation systems has led to correspondingly larger, more sophisticated representations of evacuation traffic processes. Today, micro-level analyses can be conducted for m...

Computers for Interactive Learning.

ERIC Educational Resources Information Center

Grabowski, Barbara; Aggen, William

1984-01-01

Analyzes features of computer-based interactive video including sophisticated answer judging, diagnostic feedback, simulation, animation, audible tones, touch sensitive screen, function keys, and video enhancements, and matches these to the characteristics and pedagogical styles of learners. The learner characteristics discussed include internal…

48 CFR 227.7203-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227..., reproduce, release, or disclose computer software or computer software documentation do not, by themselves, determine the extent of the Government's rights in such software or documentation. The Government may...

48 CFR 227.7203-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227..., reproduce, release, or disclose computer software or computer software documentation do not, by themselves, determine the extent of the Government's rights in such software or documentation. The Government may...

48 CFR 227.7203-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227..., reproduce, release, or disclose computer software or computer software documentation do not, by themselves, determine the extent of the Government's rights in such software or documentation. The Government may...

48 CFR 227.7203-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227..., reproduce, release, or disclose computer software or computer software documentation do not, by themselves, determine the extent of the Government's rights in such software or documentation. The Government may...

48 CFR 227.7203-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227..., reproduce, release, or disclose computer software or computer software documentation do not, by themselves, determine the extent of the Government's rights in such software or documentation. The Government may...

In This Issue

NASA Astrophysics Data System (ADS)

1996-02-01

Computational Chemistry for the Masses Not long ago, chemical computation was considered a specialty area requiring extensive computer knowledge, power, and time. Over the past decade, however, it has changed from the arcane pursuit of a few advanced university researchers in the area of physical chemistry to a familiar tool used by a wide range of chemists. Nevertheless, it has required its practitioners to have extensive knowledge of computer programming and a thorough understanding of theoretical chemical concepts and as a result usually was reserved for the graduate curriculum. Now a further metamorphosis is in progress, as computational chemistry moves into the undergraduate curriculum, often using off-the-shelf software--commercial packages or adaptations of them that are readily shared by their creators. As we put this issue together, we realized that many of the articles involved sophisticated computations that would not have been possible a few years ago in the courses described. Further, the hard and software used was widely available at a reasonable cost. Some of the articles focus on the teaching of computational methods and others simply incorporate it as a facet in their overall strategy; however, taken together, they reflect a strong trend to utilize a diverse set of readily available methods and products in the undergraduate curriculum. The most familiar recent use of computational chemistry is the computer design of molecules in organic, medicinal, and biochemistry. However, computational chemistry is useful for inorganic chemists as well and is now migrating to undergraduate courses. Lipkowitz, Pearl, Robertson, and Schultz (page 105) make a strong case for its inclusion and present a two-week component they have developed for their senior-level laboratory course. Comba and Zimmer (page 108) offer a review of inorganic molecular mechanics calculations, which is designed for the novice and includes the basic equations, their application to inorganic molecules, and a discussion of the how to evaluate the reliability of the results. A computational experiment has been specifically designed for the undergraduate laboratory by Bakalbassis, Stiakaki, Tsipis, and Tsipis (page 111). The students use an atom-superposition and electron-delocalization molecular orbital model to predict the structural, spectroscopic, and energetic properties of highly ionic metal-containing systems. The exercise introduces students to the value of computational experiments as an alternative to wet-lab work and teaches enough quantum theory to make them comfortable with current literature. For teachers of organic chemistry, Delaware and Fountain (page 116) analyze how models can actually hinder learning in the introductory course if presented passively and describe how to use computer visualizations of reactions in an active, cooperative learning mode. They argue that these computational exercises need to be embedded in a carefully planned learning system to be effective. In similar fashion, Sauers (page 114) finds that a computer-assisted molecular modeling experiment is an effective way of making the concept of "steric interactions" more accessible. The theoretical number of isomers and derivatives of organic compounds is another concept difficult to visualize, and the calculations that would used for enumeration are complex enough that they are not usually brought into the undergraduate curriculum. However, Novak (page 120) demonstrates that widely available PC software, such as Mathematica, can be used by undergraduates along with the Polya enumeration method to enumerate derivatives and see the connection between these numbers and the symmetry of the parent molecule. A different use of computational software in biochemistry than the usual computer-assisted design of molecules is the main focus of a Computer Series article by Letkeman (page 165), who models the complex interactions of metal ions in human blood serum.

Computer software.

PubMed

Rosenthal, L E

1986-10-01

Software is the component in a computer system that permits the hardware to perform the various functions that a computer system is capable of doing. The history of software and its development can be traced to the early nineteenth century. All computer systems are designed to utilize the "stored program concept" as first developed by Charles Babbage in the 1850s. The concept was lost until the mid-1940s, when modern computers made their appearance. Today, because of the complex and myriad tasks that a computer system can perform, there has been a differentiation of types of software. There is software designed to perform specific business applications. There is software that controls the overall operation of a computer system. And there is software that is designed to carry out specialized tasks. Regardless of types, software is the most critical component of any computer system. Without it, all one has is a collection of circuits, transistors, and silicone chips.

Software Piracy in Research: A Moral Analysis.

PubMed

Santillanes, Gary; Felder, Ryan Marshall

2015-08-01

Researchers in virtually every discipline rely on sophisticated proprietary software for their work. However, some researchers are unable to afford the licenses and instead procure the software illegally. We discuss the prohibition of software piracy by intellectual property laws, and argue that the moral basis for the copyright law offers the possibility of cases where software piracy may be morally justified. The ethics codes that scientific institutions abide by are informed by a rule-consequentialist logic: by preserving personal rights to authored works, people able to do so will be incentivized to create. By showing that the law has this rule-consequentialist grounding, we suggest that scientists who blindly adopt their institutional ethics codes will commit themselves to accepting that software piracy could be morally justified, in some cases. We hope that this conclusion will spark debate over important tensions between ethics codes, copyright law, and the underlying moral basis for these regulations. We conclude by offering practical solutions (other than piracy) for researchers.

48 CFR 227.7202-1 - Policy.

Code of Federal Regulations, 2011 CFR

2011-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-1 Policy. (a) Commercial computer software or commercial computer software documentation shall be acquired under the licenses customarily provided to the public...

48 CFR 227.7202-1 - Policy.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-1 Policy. (a) Commercial computer software or commercial computer software documentation shall be acquired under the licenses customarily provided to the public...

48 CFR 227.7202-1 - Policy.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-1 Policy. (a) Commercial computer software or commercial computer software documentation shall be acquired under the licenses customarily provided to the public...

48 CFR 227.7202-1 - Policy.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-1 Policy. (a) Commercial computer software or commercial computer software documentation shall be acquired under the licenses customarily provided to the public...

48 CFR 227.7202-1 - Policy.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7202-1 Policy. (a) Commercial computer software or commercial computer software documentation shall be acquired under the licenses customarily provided to the public...

InSAR Scientific Computing Environment

NASA Astrophysics Data System (ADS)

Gurrola, E. M.; Rosen, P. A.; Sacco, G.; Zebker, H. A.; Simons, M.; Sandwell, D. T.

2010-12-01

The InSAR Scientific Computing Environment (ISCE) is a software development effort in its second year within the NASA Advanced Information Systems and Technology program. The ISCE will provide a new computing environment for geodetic image processing for InSAR sensors that will enable scientists to reduce measurements directly from radar satellites and aircraft to new geophysical products without first requiring them to develop detailed expertise in radar processing methods. The environment can serve as the core of a centralized processing center to bring Level-0 raw radar data up to Level-3 data products, but is adaptable to alternative processing approaches for science users interested in new and different ways to exploit mission data. The NRC Decadal Survey-recommended DESDynI mission will deliver data of unprecedented quantity and quality, making possible global-scale studies in climate research, natural hazards, and Earth's ecosystem. The InSAR Scientific Computing Environment is planned to become a key element in processing DESDynI data into higher level data products and it is expected to enable a new class of analyses that take greater advantage of the long time and large spatial scales of these new data, than current approaches. At the core of ISCE is both legacy processing software from the JPL/Caltech ROI_PAC repeat-pass interferometry package as well as a new InSAR processing package containing more efficient and more accurate processing algorithms being developed at Stanford for this project that is based on experience gained in developing processors for missions such as SRTM and UAVSAR. Around the core InSAR processing programs we are building object-oriented wrappers to enable their incorporation into a more modern, flexible, extensible software package that is informed by modern programming methods, including rigorous componentization of processing codes, abstraction and generalization of data models, and a robust, intuitive user interface with graduated exposure to the levels of sophistication, allowing novices to apply it readily for common tasks and experienced users to mine data with great facility and flexibility. The environment is designed to easily allow user contributions, enabling an open source community to extend the framework into the indefinite future. In this paper we briefly describe both the legacy and the new core processing algorithms and their integration into the new computing environment. We describe the ISCE component and application architecture and the features that permit the desired flexibility, extensibility and ease-of-use. We summarize the state of progress of the environment and the plans for completion of the environment and for its future introduction into the radar processing community.

77 FR 50726 - Software Requirement Specifications for Digital Computer Software and Complex Electronics Used in...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... Computer Software and Complex Electronics Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear...-1209, ``Software Requirement Specifications for Digital Computer Software and Complex Electronics used... Electronics Engineers (ANSI/IEEE) Standard 830-1998, ``IEEE Recommended Practice for Software Requirements...

AOPs & Biomarkers: Bridging High Throughput Screening and Regulatory Decision Making.

EPA Science Inventory

As high throughput screening (HTS) approaches play a larger role in toxicity testing, computational toxicology has emerged as a critical component in interpreting the large volume of data produced. Computational models for this purpose are becoming increasingly more sophisticated...

A Computer Analysis of Library Postcards. (CALP)

ERIC Educational Resources Information Center

Stevens, Norman D.

1974-01-01

A description of a sophisticated application of computer techniques to the analysis of a collection of picture postcards of library buildings in an attempt to establish the minimum architectural requirements needed to distinguish one style of library building from another. (Author)

Virtual Computing Laboratories: A Case Study with Comparisons to Physical Computing Laboratories

ERIC Educational Resources Information Center

Burd, Stephen D.; Seazzu, Alessandro F.; Conway, Christopher

2009-01-01

Current technology enables schools to provide remote or virtual computing labs that can be implemented in multiple ways ranging from remote access to banks of dedicated workstations to sophisticated access to large-scale servers hosting virtualized workstations. This paper reports on the implementation of a specific lab using remote access to…

Factors Affecting Utilization of Information Output of Computer-Based Modeling Procedures in Local Government Organizations.

ERIC Educational Resources Information Center

Komsky, Susan

Fiscal Impact Budgeting Systems (FIBS) are sophisticated computer based modeling procedures used in local government organizations, whose results, however, are often overlooked or ignored by decision makers. A study attempted to discover the reasons for this situation by focusing on four factors: potential usefulness, faith in computers,…

Use of Computer-Assisted Technologies (CAT) to Enhance Social, Communicative, and Language Development in Children with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Ploog, Bertram O.; Scharf, Alexa; Nelson, DeShawn; Brooks, Patricia J.

2013-01-01

Major advances in multimedia computer technology over the past decades have made sophisticated computer games readily available to the public. This, combined with the observation that most children, including those with autism spectrum disorders (ASD), show an affinity to computers, has led researchers to recognize the potential of computer…

48 CFR 227.7207 - Contractor data repositories.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Computer Software and Computer Software Documentation 227.7207 Contractor data repositories. Follow 227.7108 when it is in the Government's interests to have a data repository include computer software or to have a separate computer software repository. Contractual instruments establishing the repository...

48 CFR 227.7200 - Scope of subpart.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7200 Scope of subpart. This subpart— (a) Prescribes policies and procedures for the acquisition of computer software and computer software documentation, and the...

48 CFR 227.7200 - Scope of subpart.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7200 Scope of subpart. This subpart— (a) Prescribes policies and procedures for the acquisition of computer software and computer software documentation, and the...

48 CFR 227.7200 - Scope of subpart.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7200 Scope of subpart. This subpart— (a) Prescribes policies and procedures for the acquisition of computer software and computer software documentation, and the...

48 CFR 227.7207 - Contractor data repositories.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Computer Software and Computer Software Documentation 227.7207 Contractor data repositories. Follow 227.7108 when it is in the Government's interests to have a data repository include computer software or to have a separate computer software repository. Contractual instruments establishing the repository...

48 CFR 227.7207 - Contractor data repositories.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Computer Software and Computer Software Documentation 227.7207 Contractor data repositories. Follow 227.7108 when it is in the Government's interests to have a data repository include computer software or to have a separate computer software repository. Contractual instruments establishing the repository...

48 CFR 227.7200 - Scope of subpart.

Code of Federal Regulations, 2011 CFR

2011-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7200 Scope of subpart. This subpart— (a) Prescribes policies and procedures for the acquisition of computer software and computer software documentation, and the...

48 CFR 227.7207 - Contractor data repositories.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Computer Software and Computer Software Documentation 227.7207 Contractor data repositories. Follow 227.7108 when it is in the Government's interests to have a data repository include computer software or to have a separate computer software repository. Contractual instruments establishing the repository...

48 CFR 227.7200 - Scope of subpart.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7200 Scope of subpart. This subpart— (a) Prescribes policies and procedures for the acquisition of computer software and computer software documentation, and the...

Programming of a flexible computer simulation to visualize pharmacokinetic-pharmacodynamic models.

PubMed

Lötsch, J; Kobal, G; Geisslinger, G

2004-01-01

Teaching pharmacokinetic-pharmacodynamic (PK/PD) models can be made more effective using computer simulations. We propose the programming of educational PK or PK/PD computer simulations as an alternative to the use of pre-built simulation software. This approach has the advantage of adaptability to non-standard or complicated PK or PK/PD models. Simplicity of the programming procedure was achieved by selecting the LabVIEW programming environment. An intuitive user interface to visualize the time courses of drug concentrations or effects can be obtained with pre-built elements. The environment uses a wiring analogy that resembles electrical circuit diagrams rather than abstract programming code. The goal of high interactivity of the simulation was attained by allowing the program to run in continuously repeating loops. This makes the program behave flexibly to the user input. The programming is described with the aid of a 2-compartment PK simulation. Examples of more sophisticated simulation programs are also given where the PK/PD simulation shows drug input, concentrations in plasma, and at effect site and the effects themselves as a function of time. A multi-compartmental model of morphine, including metabolite kinetics and effects is also included. The programs are available for download from the World Wide Web at http:// www. klinik.uni-frankfurt.de/zpharm/klin/ PKPDsimulation/content.html. For pharmacokineticists who only program occasionally, there is the possibility of building the computer simulation, together with the flexible interactive simulation algorithm for clinical pharmacological teaching in the field of PK/PD models.

48 CFR 227.7203-11 - Contractor procedures and records.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Rights in Computer Software and Computer Software Documentation 227.7203-11 Contractor procedures and records. (a) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, requires a contractor, and its subcontractors or suppliers that will...

48 CFR 212.212 - Computer software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Computer software. 212.212... Acquisition of Commercial Items 212.212 Computer software. (1) Departments and agencies shall identify and... technology development), opportunities for the use of commercial computer software and other non...

48 CFR 227.7203-11 - Contractor procedures and records.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Rights in Computer Software and Computer Software Documentation 227.7203-11 Contractor procedures and records. (a) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, requires a contractor, and its subcontractors or suppliers that will...

48 CFR 212.212 - Computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Computer software. 212.212... Acquisition of Commercial Items 212.212 Computer software. (1) Departments and agencies shall identify and... technology development), opportunities for the use of commercial computer software and other non...

48 CFR 212.212 - Computer software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Computer software. 212.212... Acquisition of Commercial Items 212.212 Computer software. (1) Departments and agencies shall identify and... technology development), opportunities for the use of commercial computer software and other non...

48 CFR 212.212 - Computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Computer software. 212.212... Acquisition of Commercial Items 212.212 Computer software. (1) Departments and agencies shall identify and... technology development), opportunities for the use of commercial computer software and other non...

48 CFR 212.212 - Computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Computer software. 212.212... Acquisition of Commercial Items 212.212 Computer software. (1) Departments and agencies shall identify and... technology development), opportunities for the use of commercial computer software and other non...

48 CFR 227.7203-11 - Contractor procedures and records.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Rights in Computer Software and Computer Software Documentation 227.7203-11 Contractor procedures and records. (a) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, requires a contractor, and its subcontractors or suppliers that will...

48 CFR 227.7203-11 - Contractor procedures and records.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Rights in Computer Software and Computer Software Documentation 227.7203-11 Contractor procedures and records. (a) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, requires a contractor, and its subcontractors or suppliers that will...

48 CFR 227.7203-11 - Contractor procedures and records.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Rights in Computer Software and Computer Software Documentation 227.7203-11 Contractor procedures and records. (a) The clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation, requires a contractor, and its subcontractors or suppliers that will...

Combining Multilevel Analysis with National Value-Added Data Sets - A Case Study to Explore the Effects of School Diversity

ERIC Educational Resources Information Center

Schagen, Ian; Schagen, Sandie

2005-01-01

The advent of large-scale matched data sets, linking pupils' attainment across key stages, gives new opportunities to explore the effects of school organisational factors on pupil performance. Combined with currently available sophisticated and efficient software for multilevel analysis, it offers educational researchers the chance to develop…

Mobile healthcare applications: system design review, critical issues and challenges.

PubMed

Baig, Mirza Mansoor; GholamHosseini, Hamid; Connolly, Martin J

2015-03-01

Mobile phones are becoming increasingly important in monitoring and delivery of healthcare interventions. They are often considered as pocket computers, due to their advanced computing features, enhanced preferences and diverse capabilities. Their sophisticated sensors and complex software applications make the mobile healthcare (m-health) based applications more feasible and innovative. In a number of scenarios user-friendliness, convenience and effectiveness of these systems have been acknowledged by both patients as well as healthcare providers. M-health technology employs advanced concepts and techniques from multidisciplinary fields of electrical engineering, computer science, biomedical engineering and medicine which benefit the innovations of these fields towards healthcare systems. This paper deals with two important aspects of current mobile phone based sensor applications in healthcare. Firstly, critical review of advanced applications such as; vital sign monitoring, blood glucose monitoring and in-built camera based smartphone sensor applications. Secondly, investigating challenges and critical issues related to the use of smartphones in healthcare including; reliability, efficiency, mobile phone platform variability, cost effectiveness, energy usage, user interface, quality of medical data, and security and privacy. It was found that the mobile based applications have been widely developed in recent years with fast growing deployment by healthcare professionals and patients. However, despite the advantages of smartphones in patient monitoring, education, and management there are some critical issues and challenges related to security and privacy of data, acceptability, reliability and cost that need to be addressed.

High-Performance Computing Act of 1991. Report of the Senate Committee on Commerce, Science, and Transportation on S. 272. Senate, 102d Congress, 1st Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Committee on Commerce, Science, and Transportation.

This report discusses Senate Bill no. 272, which provides for a coordinated federal research and development program to ensure continued U.S. leadership in high-performance computing. High performance computing is defined as representing the leading edge of technological advancement in computing, i.e., the most sophisticated computer chips, the…

InterFace: A software package for face image warping, averaging, and principal components analysis.

PubMed

Kramer, Robin S S; Jenkins, Rob; Burton, A Mike

2017-12-01

We describe InterFace, a software package for research in face recognition. The package supports image warping, reshaping, averaging of multiple face images, and morphing between faces. It also supports principal components analysis (PCA) of face images, along with tools for exploring the "face space" produced by PCA. The package uses a simple graphical user interface, allowing users to perform these sophisticated image manipulations without any need for programming knowledge. The program is available for download in the form of an app, which requires that users also have access to the (freely available) MATLAB Runtime environment.

Applications of AN OO Methodology and Case to a Daq System

NASA Astrophysics Data System (ADS)

Bee, C. P.; Eshghi, S.; Jones, R.; Kolos, S.; Magherini, C.; Maidantchik, C.; Mapelli, L.; Mornacchi, G.; Niculescu, M.; Patel, A.; Prigent, D.; Spiwoks, R.; Soloviev, I.; Caprini, M.; Duval, P. Y.; Etienne, F.; Ferrato, D.; Le van Suu, A.; Qian, Z.; Gaponenko, I.; Merzliakov, Y.; Ambrosini, G.; Ferrari, R.; Fumagalli, G.; Polesello, G.

The RD13 project has evaluated the use of the Object Oriented Information Engineering (OOIE) method during the development of several software components connected to the DAQ system. The method is supported by a sophisticated commercial CASE tool (Object Management Workbench) and programming environment (Kappa) which covers the full life-cycle of the software including model simulation, code generation and application deployment. This paper gives an overview of the method, CASE tool, DAQ components which have been developed and we relate our experiences with the method and tool, its integration into our development environment and the spiral lifecycle it supports.

48 CFR 212.7003 - Technical data and computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... computer software. 212.7003 Section 212.7003 Federal Acquisition Regulations System DEFENSE ACQUISITION... data and computer software. For purposes of establishing delivery requirements and license rights for technical data under 227.7102 and for computer software under 227.7202, there shall be a rebuttable...

48 CFR 212.7003 - Technical data and computer software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... computer software. 212.7003 Section 212.7003 Federal Acquisition Regulations System DEFENSE ACQUISITION... data and computer software. For purposes of establishing delivery requirements and license rights for technical data under 227.7102 and for computer software under 227.7202, there shall be a rebuttable...

48 CFR 212.7003 - Technical data and computer software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... computer software. 212.7003 Section 212.7003 Federal Acquisition Regulations System DEFENSE ACQUISITION... data and computer software. For purposes of establishing delivery requirements and license rights for technical data under 227.7102 and for computer software under 227.7202, there shall be a rebuttable...

48 CFR 212.7003 - Technical data and computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... computer software. 212.7003 Section 212.7003 Federal Acquisition Regulations System DEFENSE ACQUISITION... data and computer software. For purposes of establishing delivery requirements and license rights for technical data under 227.7102 and for computer software under 227.7202, there shall be a rebuttable...

48 CFR 212.7003 - Technical data and computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... computer software. 212.7003 Section 212.7003 Federal Acquisition Regulations System DEFENSE ACQUISITION... data and computer software. For purposes of establishing delivery requirements and license rights for technical data under 227.7102 and for computer software under 227.7202, there shall be a rebuttable...

77 FR 50722 - Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Software Unit Testing for Digital Computer Software...) is issuing for public comment draft regulatory guide (DG), DG-1208, ``Software Unit Testing for Digital Computer Software used in Safety Systems of Nuclear Power Plants.'' The DG-1208 is proposed...

78 FR 47011 - Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Software Unit Testing for Digital Computer Software... revised regulatory guide (RG), revision 1 of RG 1.171, ``Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants.'' This RG endorses American National Standards...

48 CFR 227.7203-4 - License rights.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Software and Computer Software Documentation 227.7203-4 License rights. (a) Grant of license. The Government obtains rights in computer software or computer software documentation, including a copyright license, under an irrevocable license granted or obtained by the contractor which developed the software...

48 CFR 227.7203-4 - License rights.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Software and Computer Software Documentation 227.7203-4 License rights. (a) Grant of license. The Government obtains rights in computer software or computer software documentation, including a copyright license, under an irrevocable license granted or obtained by the contractor which developed the software...

48 CFR 227.7203-4 - License rights.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Software and Computer Software Documentation 227.7203-4 License rights. (a) Grant of license. The Government obtains rights in computer software or computer software documentation, including a copyright license, under an irrevocable license granted or obtained by the contractor which developed the software...

48 CFR 227.7203-4 - License rights.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Software and Computer Software Documentation 227.7203-4 License rights. (a) Grant of license. The Government obtains rights in computer software or computer software documentation, including a copyright license, under an irrevocable license granted or obtained by the contractor which developed the software...

48 CFR 227.7203-4 - License rights.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Software and Computer Software Documentation 227.7203-4 License rights. (a) Grant of license. The Government obtains rights in computer software or computer software documentation, including a copyright license, under an irrevocable license granted or obtained by the contractor which developed the software...

Lockheed L-1011 TriStar to support Adaptive Performance Optimization study with NASA F-18 chase plan

NASA Technical Reports Server (NTRS)

1995-01-01

This Lockheed L-1011 Tristar, seen here June 1995, is currently the subject of a new flight research experiment developed by NASA's Dryden Flight Research Center, Edwards, California, to improve the effiecency of large transport aircraft. Shown with a NASA F-18 chase plane over California's Sierra Nevada mountains during an earlier baseline flight, the jetliner operated by Oribtal Sciences Corp., recently flew its first data-gathering mission in the Adaptive Performance Optimization project. The experiment seeks to reduce fuel comsumption of large jetliners by improving the aerodynamic efficiency of their wings at cruise conditions. A research computer employing a sophisticated software program adapts to changing flight conditions by commanding small movements of the L-1011's outboard ailerons to give its wings the most efficient - or optimal - airfoil. Up to a dozen research flights will be flown in the current and follow-on phases of the project over the next couple years.

Flexural-torsional vibration of simply supported open cross-section steel beams under moving loads

NASA Astrophysics Data System (ADS)

Michaltsos, G. T.; Sarantithou, E.; Sophianopoulos, D. S.

2005-02-01

SummaryThe present work deals with linearized modal analysis of the combined flexural-torsional vibration of simply supported steel beams with open monosymmetric cross-sections, acted upon by a load of constant magnitude, traversing its span eccentrically with constant velocity. After thoroughly investigating the free vibrations of the structure, which simulates a commonly used highway bridge, its forced motions under the aforementioned loading type are investigated. Utilizing the capabilities of symbolic computations within modern mathematical software, the effect of the most significant geometrical and cross-sectional beam properties on the free vibration characteristics of the beam are established and presented in tabular and graphical form. Moreover, adopting realistic values of the simplified vehicle model adopted, the effects of eccentricity, load magnitude and corresponding velocity are assessed and interesting conclusions for structural design purposes are drawn. The proposed methodology may serve as a starting point for further in-depth study of the whole scientific subject, in which sophisticated vehicle models, energy dissipation and more complicated bridge models may be used.

Digital Compositing Techniques for Coronal Imaging (Invited review)

NASA Astrophysics Data System (ADS)

Espenak, F.

2000-04-01

The solar corona exhibits a huge range in brightness which cannot be captured in any single photographic exposure. Short exposures show the bright inner corona and prominences, while long exposures reveal faint details in equatorial streamers and polar brushes. For many years, radial gradient filters and other analog techniques have been used to compress the corona's dynamic range in order to study its morphology. Such techniques demand perfect pointing and tracking during the eclipse, and can be difficult to calibrate. In the past decade, the speed, memory and hard disk capacity of personal computers have rapidly increased as prices continue to drop. It is now possible to perform sophisticated image processing of eclipse photographs on commercially available CPU's. Software programs such as Adobe Photoshop permit combining multiple eclipse photographs into a composite image which compresses the corona's dynamic range and can reveal subtle features and structures. Algorithms and digital techniques used for processing 1998 eclipse photographs will be discussed which are equally applicable to the recent eclipse of 1999 August 11.

Johnston Atoll Plutonium Cleanup Project, plant modification and operation. Volume 1. Annual report option year 2. Technical report, 1 October 1992-24 May 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moroney, K.S.; Moroney, J.D.; Johnson, N.R.

1995-04-01

This report continues the documentation of the operation of TMA/Eberline`s Segmented Gate System technology for removing mixed plutonium and americium contamination at DNA`s Johnston Atoll site. Contaminated feed is conveyed under arrays of radiation detectors coupled with sophisticated computer software developed by Eberline Instrument Corporation. Segmented gates (chutes) on pneumatically-driven pistons move forward when contamination is detected to remove only the contaminated portion from the main flow of feed material. Only about one pint of contaminant is removed during each diversion event. At the JA site, a 98% volume reduction has been achieved, with the remediated soil cleaned to DNA`smore » criteria for release for unrestricted use of 500 Bq/kg total tnansuranic alpha contamination and no hot particles of greater than 5000 Becquerrels. The low level waste concentrate is expected to be packaged for shipment to an approved defense waste disposal site.« less

Johnston Atoll Plutonium Cleanup Project. Plant modification and operation. Volume 2. Annual report option year 2. Appendix A. Technical report, 1 October 1992-24 May 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moroney, K.S.; Moroney, J.D.; Johnson, N.R.

1995-04-01

This report continues the documentation of the operation of TMA/Eberline`s Segmented Gate System technology for removing mixed plutonium and americium contamination at DNA`s Johnston Atoll site. Contaminated feed is conveyed under arrays of radiation detectors coupled with sophisticated computer software developed by Eberline Instrument Corporation. Segmented gates (chutes) on pneumatically-driven pistons move forward when contamination is detected to remove only the contaminated portion from the main flow of feed material. Only about one pint of contaminant is removed during each diversion event. At the JA site, a 98% volume reduction has been achieved, with the remediated soil cleaned to DNA`smore » criteria for release for unrestricted use of 500 Bq/kg total transuranic alpha contamination and no hot particles of greater than 5000 Becquerrels. The low level waste concentrate is expected to be packaged for shipment to an approved defense waste disposal site.« less

Johnston Atoll Plutonium Cleanup Project, plant modification and operation. Volume 3. Annual report option year 2. Appendices b through h. Technical report, 1 October 1992-24 May 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moroney, K.S.; Moroney, J.D.; Johnson, N.R.

1995-04-01

This report continues the documentation of the operation of TMA/Eberline`s Segmented Gate System technology for removing mixed plutonium and americium contamination at DNA`s Johnston Atoll site. Contaminated feed is conveyed under arrays of radiation detectors coupled with sophisticated computer software developed by Eberline Instrument Corporation. Segmented gates (chutes) on pneumatically-driven pistons move forward when contamination is detected to remove only the contaminated portion from the main flow of feed material. Only about one pint of contaminant is removed during each diversion event. At the JA site, a 98% volume reduction has been achieved, with the remediated soil cleaned to DNA`smore » criteria for release for unrestricted use of 500 Bq/kg total transuranic alpha contamination and no hot particles of greater than 5000 Becquerrels. The low level waste concentrate is expected to be packaged for shipment to an approved defense waste disposal site.« less

Smartphone attachment for stethoscope recording.

PubMed

Thompson, Jeff

2015-01-01

With the ubiquity of smartphones and the rising technology of 3D printing, novel devices can be developed that leverage the "computer in your pocket" and rapid prototyping technologies toward scientific, medical, engineering, and creative purposes. This paper describes such a device: a simple 3D-printed extension for Apple's iPhone that allows the sound from an off-the-shelf acoustic stethoscope to be recorded using the phone's built-in microphone. The attachment's digital 3D files can be easily shared, modified for similar phones and devices capable of recording audio, and in combination with 3D printing technology allow for fabrication of a durable device without need for an entire factory of expensive and specialized machining tools. It is hoped that by releasing this device as an open source set of printable files that can be downloaded and reproduced cheaply, others can make use of these developments where access to cost-prohibitive, specialized medical instruments are not available. Coupled with specialized smartphone software ("apps"), more sophisticated and automated diagnostics may also be possible on-site.

Improvement in the Accuracy of Flux Measurement of Radio Sources by Exploiting an Arithmetic Pattern in Photon Bunching Noise

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lieu, Richard

A hierarchy of statistics of increasing sophistication and accuracy is proposed to exploit an interesting and fundamental arithmetic structure in the photon bunching noise of incoherent light of large photon occupation number, with the purpose of suppressing the noise and rendering a more reliable and unbiased measurement of the light intensity. The method does not require any new hardware, rather it operates at the software level with the help of high-precision computers to reprocess the intensity time series of the incident light to create a new series with smaller bunching noise coherence length. The ultimate accuracy improvement of this methodmore » of flux measurement is limited by the timing resolution of the detector and the photon occupation number of the beam (the higher the photon number the better the performance). The principal application is accuracy improvement in the signal-limited bolometric flux measurement of a radio source.« less

HEART: an automated beat-to-beat cardiovascular analysis package using Matlab.

PubMed

Schroeder, M J Mark J; Perreault, Bill; Ewert, D L Daniel L; Koenig, S C Steven C

2004-07-01

A computer program is described for beat-to-beat analysis of cardiovascular parameters from high-fidelity pressure and flow waveforms. The Hemodynamic Estimation and Analysis Research Tool (HEART) is a post-processing analysis software package developed in Matlab that enables scientists and clinicians to document, load, view, calibrate, and analyze experimental data that have been digitally saved in ascii or binary format. Analysis routines include traditional hemodynamic parameter estimates as well as more sophisticated analyses such as lumped arterial model parameter estimation and vascular impedance frequency spectra. Cardiovascular parameter values of all analyzed beats can be viewed and statistically analyzed. An attractive feature of the HEART program is the ability to analyze data with visual quality assurance throughout the process, thus establishing a framework toward which Good Laboratory Practice (GLP) compliance can be obtained. Additionally, the development of HEART on the Matlab platform provides users with the flexibility to adapt or create study specific analysis files according to their specific needs. Copyright 2003 Elsevier Ltd.

Overview of the NASA SETI Program

NASA Technical Reports Server (NTRS)

Oliver, B. M.

1986-01-01

The NASA Search of Extraterrestrial Intelligence (SETI) program plan is to scan the microwave window from 1 to 10 GHz with existing radio telescopes and sophisticated signal processing equipment looking for narrow band features that might represent artificial signals. A microwave spectrometer was built and is being field tested. A pattern recognition computer to search for drifting continuous wave signals and pulse trains in the output spectra is being designed. Equipment to characterize the radio frequency interference environment was also built. The plan is to complete the hardware and software by FY-88. Then, with increased funding, this equipment will be replicated in Very Large Scale Integration form. Observations, both a complete sky survey and a search fo nearby solar type stars, will begin in about 1990. The hypothesis that very powerful signals exist or that signals are being beamed at us will be tested. To detect the kinds of signals radiated at distances of 100 light years will require a collecting area kilometers in diameter.

The HMMER Web Server for Protein Sequence Similarity Search.

PubMed

Prakash, Ananth; Jeffryes, Matt; Bateman, Alex; Finn, Robert D

2017-12-08

Protein sequence similarity search is one of the most commonly used bioinformatics methods for identifying evolutionarily related proteins. In general, sequences that are evolutionarily related share some degree of similarity, and sequence-search algorithms use this principle to identify homologs. The requirement for a fast and sensitive sequence search method led to the development of the HMMER software, which in the latest version (v3.1) uses a combination of sophisticated acceleration heuristics and mathematical and computational optimizations to enable the use of profile hidden Markov models (HMMs) for sequence analysis. The HMMER Web server provides a common platform by linking the HMMER algorithms to databases, thereby enabling the search for homologs, as well as providing sequence and functional annotation by linking external databases. This unit describes three basic protocols and two alternate protocols that explain how to use the HMMER Web server using various input formats and user defined parameters. © 2017 by John Wiley & Sons, Inc. Copyright © 2017 John Wiley & Sons, Inc.

48 CFR 227.7203-12 - Government right to establish conformity of markings.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-12... identified in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. All other markings are nonconforming markings. An authorized marking that...

48 CFR 227.7203-12 - Government right to establish conformity of markings.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-12... identified in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. All other markings are nonconforming markings. An authorized marking that...

48 CFR 227.7203-12 - Government right to establish conformity of markings.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-12... identified in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. All other markings are nonconforming markings. An authorized marking that...

48 CFR 227.7203-12 - Government right to establish conformity of markings.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-12... identified in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. All other markings are nonconforming markings. An authorized marking that...

48 CFR 227.7203-12 - Government right to establish conformity of markings.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7203-12... identified in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. All other markings are nonconforming markings. An authorized marking that...

Progress in Computational Electron-Molecule Collisions

NASA Astrophysics Data System (ADS)

Rescigno, Tn

1997-10-01

The past few years have witnessed tremendous progress in the development of sophisticated ab initio methods for treating collisions of slow electrons with isolated small molecules. Researchers in this area have benefited greatly from advances in computer technology; indeed, the advent of parallel computers has made it possible to carry out calculations at a level of sophistication inconceivable a decade ago. But bigger and faster computers are only part of the picture. Even with today's computers, the practical need to study electron collisions with the kinds of complex molecules and fragments encountered in real-world plasma processing environments is taxing present methods beyond their current capabilities. Since extrapolation of existing methods to handle increasingly larger targets will ultimately fail as it would require computational resources beyond any imagined, continued progress must also be linked to new theoretical developments. Some of the techniques recently introduced to address these problems will be discussed and illustrated with examples of electron-molecule collision calculations we have carried out on some fairly complex target gases encountered in processing plasmas. Electron-molecule scattering continues to pose many formidable theoretical and computational challenges. I will touch on some of the outstanding open questions.

Exploring the Process of Adult Computer Software Training Using Andragogy, Situated Cognition, and a Minimalist Approach

ERIC Educational Resources Information Center

Hurt, Andrew C.

2007-01-01

With technology advances, computer software becomes increasingly difficult to learn. Adults often rely on software training to keep abreast of these changes. Instructor-led software training is frequently used to teach adults new software skills; however there is limited research regarding the best practices in adult computer software training.…

Imaging and automated detection of Sitophilus oryzae (Coleoptera: Curculionidae) pupae in hard red winter wheat.

PubMed

Toews, Michael D; Pearson, Tom C; Campbell, James F

2006-04-01

Computed tomography, an imaging technique commonly used for diagnosing internal human health ailments, uses multiple x-rays and sophisticated software to recreate a cross-sectional representation of a subject. The use of this technique to image hard red winter wheat, Triticum aestivm L., samples infested with pupae of Sitophilus oryzae (L.) was investigated. A software program was developed to rapidly recognize and quantify the infested kernels. Samples were imaged in a 7.6-cm (o.d.) plastic tube containing 0, 50, or 100 infested kernels per kg of wheat. Interkernel spaces were filled with corn oil so as to increase the contrast between voids inside kernels and voids among kernels. Automated image processing, using a custom C language software program, was conducted separately on each 100 g portion of the prepared samples. The average detection accuracy in the five infested kernels per 100-g samples was 94.4 +/- 7.3% (mean +/- SD, n = 10), whereas the average detection accuracy in the 10 infested kernels per 100-g sample was 87.3 +/- 7.9% (n = 10). Detection accuracy in the 10 infested kernels per 100-g samples was slightly less than the five infested kernels per 100-g samples because of some infested kernels overlapping with each other or air bubbles in the oil. A mean of 1.2 +/- 0.9 (n = 10) bubbles (per tube) was incorrectly classed as infested kernels in replicates containing no infested kernels. In light of these positive results, future studies should be conducted using additional grains, insect species, and life stages.

Choosing a Computer Language for Institutional Research. The AIR Professional File No. 6.

ERIC Educational Resources Information Center

Strenglein, Denise

1980-01-01

It is suggested that much thought should be given to choosing an appropriate computer language for an institutional research office, considering the sophistication of the staff, types of planned application, size and type of computer, and availability of central programming support in the institution. For offices that prepare straight reports and…

48 CFR 252.227-7032 - Rights in technical data and computer software (foreign).

Code of Federal Regulations, 2013 CFR

2013-10-01

... and computer software (foreign). 252.227-7032 Section 252.227-7032 Federal Acquisition Regulations... computer software (foreign). As prescribed in 227.7103-17, use the following clause: Rights in Technical Data and Computer Software (Foreign) (JUN 1975) The United States Government may duplicate, use, and...

48 CFR 252.227-7032 - Rights in technical data and computer software (foreign).

Code of Federal Regulations, 2014 CFR

2014-10-01

... and computer software (foreign). 252.227-7032 Section 252.227-7032 Federal Acquisition Regulations... computer software (foreign). As prescribed in 227.7103-17, use the following clause: Rights in Technical Data and Computer Software (Foreign) (JUN 1975) The United States Government may duplicate, use, and...

75 FR 6185 - Information Collection Requirement; Defense Federal Acquisition Regulation Supplement; Rights in...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-08

...; Defense Federal Acquisition Regulation Supplement; Rights in Technical Data and Computer Software (OMB... 227.72, Rights in Computer Software and Computer Software Documentation, and related provisions and... rights in technical data and computer software. DoD needs this information to implement 10 U.S.C. 2320...

14 CFR 415.123 - Computing systems and software.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Computing systems and software. 415.123... Launch Vehicle From a Non-Federal Launch Site § 415.123 Computing systems and software. (a) An applicant's safety review document must describe all computing systems and software that perform a safety...

14 CFR 415.123 - Computing systems and software.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Computing systems and software. 415.123... Launch Vehicle From a Non-Federal Launch Site § 415.123 Computing systems and software. (a) An applicant's safety review document must describe all computing systems and software that perform a safety...

48 CFR 252.227-7032 - Rights in technical data and computer software (foreign).

Code of Federal Regulations, 2011 CFR

2011-10-01

... and computer software (foreign). 252.227-7032 Section 252.227-7032 Federal Acquisition Regulations... computer software (foreign). As prescribed in 227.7103-17, use the following clause: Rights in Technical Data and Computer Software (Foreign) (JUN 1975) The United States Government may duplicate, use, and...

48 CFR 252.227-7032 - Rights in technical data and computer software (foreign).

Code of Federal Regulations, 2012 CFR

2012-10-01

... and computer software (foreign). 252.227-7032 Section 252.227-7032 Federal Acquisition Regulations... computer software (foreign). As prescribed in 227.7103-17, use the following clause: Rights in Technical Data and Computer Software (Foreign) (JUN 1975) The United States Government may duplicate, use, and...

48 CFR 252.227-7032 - Rights in technical data and computer software (foreign).

Code of Federal Regulations, 2010 CFR

2010-10-01

... and computer software (foreign). 252.227-7032 Section 252.227-7032 Federal Acquisition Regulations... computer software (foreign). As prescribed in 227.7103-17, use the following clause: Rights in Technical Data and Computer Software (Foreign) (JUN 1975) The United States Government may duplicate, use, and...

78 FR 30898 - Information Collection Requirement; Defense Federal Acquisition Regulation Supplement; Rights in...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-23

... Data and Computer Software AGENCY: Defense Acquisition Regulations System; Department of Defense (DoD... in Technical Data, and Subpart 227.72, Rights in Computer Software and Computer Software... are associated with rights in technical data and computer software. DoD needs this information to...

14 CFR 415.123 - Computing systems and software.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Computing systems and software. 415.123... Launch Vehicle From a Non-Federal Launch Site § 415.123 Computing systems and software. (a) An applicant's safety review document must describe all computing systems and software that perform a safety...

14 CFR 415.123 - Computing systems and software.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Computing systems and software. 415.123... Launch Vehicle From a Non-Federal Launch Site § 415.123 Computing systems and software. (a) An applicant's safety review document must describe all computing systems and software that perform a safety...

14 CFR 415.123 - Computing systems and software.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Computing systems and software. 415.123... Launch Vehicle From a Non-Federal Launch Site § 415.123 Computing systems and software. (a) An applicant's safety review document must describe all computing systems and software that perform a safety...

Railroads and the Environment : Estimation of Fuel Consumption in Rail Transportation : Volume 3. Comparison of Computer Simulations with Field Measurements

DOT National Transportation Integrated Search

1978-09-01

This report documents comparisons between extensive rail freight service measurements (previously presented in Volume II) and simulations of the same operations using a sophisticated train performance calculator computer program. The comparisons cove...

Home, Hearth and Computing.

ERIC Educational Resources Information Center

Seelig, Anita

1982-01-01

Advantages of having children use microcomputers at school and home include learning about sophisticated concepts early in life without a great deal of prodding, playing games that expand knowledge, and becoming literate in computer knowledge needed later in life. Includes comments from parents on their experiences with microcomputers and…

Elliptic Length Scales in Laminar, Two-Dimensional Supersonic Flows

DTIC Science & Technology

2015-06-01

sophisticated computational fluid dynamics ( CFD ) methods. Additionally, for 3D interactions, the length scales would require determination in spanwise as well...Manna, M. “Experimental, Analytical, and Computational Methods Applied to Hypersonic Compression Ramp Flows,” AIAA Journal, Vol. 32, No. 2, Feb. 1994

32 CFR 806b.35 - Balancing protection.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., Computer Security, 5 for procedures on safeguarding personal information in automated records. 5 http://www... automated system with a log-on protocol. Others may require more sophisticated security protection based on the sensitivity of the information. Classified computer systems or those with established audit and...

32 CFR 806b.35 - Balancing protection.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., Computer Security, 5 for procedures on safeguarding personal information in automated records. 5 http://www... automated system with a log-on protocol. Others may require more sophisticated security protection based on the sensitivity of the information. Classified computer systems or those with established audit and...

32 CFR 806b.35 - Balancing protection.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., Computer Security, 5 for procedures on safeguarding personal information in automated records. 5 http://www... automated system with a log-on protocol. Others may require more sophisticated security protection based on the sensitivity of the information. Classified computer systems or those with established audit and...

32 CFR 806b.35 - Balancing protection.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., Computer Security, 5 for procedures on safeguarding personal information in automated records. 5 http://www... automated system with a log-on protocol. Others may require more sophisticated security protection based on the sensitivity of the information. Classified computer systems or those with established audit and...

32 CFR 806b.35 - Balancing protection.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., Computer Security, 5 for procedures on safeguarding personal information in automated records. 5 http://www... automated system with a log-on protocol. Others may require more sophisticated security protection based on the sensitivity of the information. Classified computer systems or those with established audit and...

Sanibel Symposium in the Petascale-Exascale Computational Era

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, Hai-Ping

The 56 th Sanibel Symposium was held February 14-19 2016 at the King and Prince Hotel, St. Simons Island, GA. It successfully brought quantum chemists and chemical and condensed matter physicists together in presentations, posters, and informal discussions bridging those two communities. The Symposium has had a significant role in preparing generations of quantum theorists. As computational potency and algorithmic sophistication have grown, the Symposium has evolved to emphasize more heavily computationally oriented method development in chemistry and materials physics, including nanoscience, complex molecular phenomena, and even bio-molecular methods and problems. Given this context, the 56 th Sanibel meeting systematicallymore » and deliberately had sessions focused on exascale computation. A selection of outstanding theoretical problems that need serious attention was included. Five invited sessions, two contributed sessions (hot topics), and a poster session were organized with the exascale theme. This was a historic milestone in the evolution of the Symposia. Just as years ago linear algebra, perturbation theory, density matrices, and band-structure methods dominated early Sanibel Symposia, the exascale sessions of the 56 thmeeting contributed a transformative influence to add structure and strength to the computational physical science community in an unprecedented way. A copy of the full program of the 56 th Symposium is attached. The exascale sessions were Linear Scaling, Non-Adabatic Dynamics, Interpretive Theory and Models, Computation, Software, and Algorithms, and Quantum Monte Carlo. The Symposium Proceedings will be published in Molecular Physics (2017). Note that the Sanibel proceedings from 2015 and 2014 were published as Molecular Physics vol. 114, issue 3-4 (2016) and vol. 113, issue 3-4 (2015) respectively.« less

37 CFR 201.26 - Recordation of documents pertaining to computer shareware and donation of public domain computer...

Code of Federal Regulations, 2011 CFR

2011-07-01

... pertaining to computer shareware and donation of public domain computer software. 201.26 Section 201.26... public domain computer software. (a) General. This section prescribes the procedures for submission of legal documents pertaining to computer shareware and the deposit of public domain computer software...

37 CFR 201.26 - Recordation of documents pertaining to computer shareware and donation of public domain computer...

Code of Federal Regulations, 2010 CFR

2010-07-01

... pertaining to computer shareware and donation of public domain computer software. 201.26 Section 201.26... public domain computer software. (a) General. This section prescribes the procedures for submission of legal documents pertaining to computer shareware and the deposit of public domain computer software...

37 CFR 201.26 - Recordation of documents pertaining to computer shareware and donation of public domain computer...

Code of Federal Regulations, 2013 CFR

2013-07-01

... pertaining to computer shareware and donation of public domain computer software. 201.26 Section 201.26... public domain computer software. (a) General. This section prescribes the procedures for submission of legal documents pertaining to computer shareware and the deposit of public domain computer software...

37 CFR 201.26 - Recordation of documents pertaining to computer shareware and donation of public domain computer...

Code of Federal Regulations, 2012 CFR

2012-07-01

... pertaining to computer shareware and donation of public domain computer software. 201.26 Section 201.26... public domain computer software. (a) General. This section prescribes the procedures for submission of legal documents pertaining to computer shareware and the deposit of public domain computer software...

Space Spurred Computer Graphics

NASA Technical Reports Server (NTRS)

1983-01-01

Dicomed Corporation was asked by NASA in the early 1970s to develop processing capabilities for recording images sent from Mars by Viking spacecraft. The company produced a film recorder which increased the intensity levels and the capability for color recording. This development led to a strong technology base resulting in sophisticated computer graphics equipment. Dicomed systems are used to record CAD (computer aided design) and CAM (computer aided manufacturing) equipment, to update maps and produce computer generated animation.

A computer assisted tutorial for applications of computer spreadsheets in nursing financial management.

PubMed

Edwardson, S R; Pejsa, J

1993-01-01

A computer-based tutorial for teaching nursing financial management concepts was developed using the macro function of a commercially available spreadsheet program. The goals of the tutorial were to provide students with an experience with spreadsheets as a computer tool and to teach selected financial management concepts. Preliminary results show the tutorial was well received by students. Suggestions are made for overcoming the general lack of computer sophistication among students.

Cloudy Solar Software - Enhanced Capabilities for Finding, Pre-processing, and Visualizing Solar Data

NASA Astrophysics Data System (ADS)

Istvan Etesi, Laszlo; Tolbert, K.; Schwartz, R.; Zarro, D.; Dennis, B.; Csillaghy, A.

2010-05-01

In our project "Extending the Virtual Solar Observatory (VSO)” we have combined some of the features available in Solar Software (SSW) to produce an integrated environment for data analysis, supporting the complete workflow from data location, retrieval, preparation, and analysis to creating publication-quality figures. Our goal is an integrated analysis experience in IDL, easy-to-use but flexible enough to allow more sophisticated procedures such as multi-instrument analysis. To that end, we have made the transition from a locally oriented setting where all the analysis is done on the user's computer, to an extended analysis environment where IDL has access to services available on the Internet. We have implemented a form of Cloud Computing that uses the VSO search and a new data retrieval and pre-processing server (PrepServer) that provides remote execution of instrument-specific data preparation. We have incorporated the interfaces to the VSO search and the PrepServer into an IDL widget (SHOW_SYNOP) that provides user-friendly searching and downloading of raw solar data and optionally sends search results for pre-processing to the PrepServer prior to downloading the data. The raw and pre-processed data can be displayed with our plotting suite, PLOTMAN, which can handle different data types (light curves, images, and spectra) and perform basic data operations such as zooming, image overlays, solar rotation, etc. PLOTMAN is highly configurable and suited for visual data analysis and for creating publishable figures. PLOTMAN and SHOW_SYNOP work hand-in-hand for a convenient working environment. Our environment supports a growing number of solar instruments that currently includes RHESSI, SOHO/EIT, TRACE, SECCHI/EUVI, HINODE/XRT, and HINODE/EIS.

LiPD and CSciBox: A Case Study in Why Data Standards are Important for Paleoscience

NASA Astrophysics Data System (ADS)

Weiss, I.; Bradley, E.; McKay, N.; Emile-Geay, J.; de Vesine, L. R.; Anderson, K. A.; White, J. W. C.; Marchitto, T. M., Jr.

2016-12-01

CSciBox [1] is an integrated software system that helps geoscientists build and evaluate age models. Its user chooses from a number of built-in analysis tools, composing them into an analysis workflow and applying it to paleoclimate proxy datasets. CSciBox employs modern database technology to store both the data and the analysis results in an easily accessible and searchable form, and offers the user access to the computational toolbox, the data, and the results via a graphical user interface and a sophisticated plotter. Standards are a staple of modern life, and underlie any form of automation. Without data standards, it is difficult, if not impossible, to construct effective computer tools for paleoscience analysis. The LiPD (Linked Paleo Data) framework [2] enables the storage of both data and metadata in systematic, meaningful, machine-readable ways. LiPD has been a primary enabler of CSciBox's goals of usability, interoperability, and reproducibility. Building LiPD capabilities into CSciBox's importer, for instance, eliminated the need to ask the user about file formats, variable names, relationships between columns in the input file, etc. Building LiPD capabilities into the exporter facilitated the storage of complete details about the input data-provenance, preprocessing steps, etc.-as well as full descriptions of any analyses that were performed using the CSciBox tool, along with citations to appropriate references. This comprehensive collection of data and metadata, which is all linked together in a semantically meaningful, machine-readable way, not only completely documents the analyses and makes them reproducible. It also enables interoperability with any other software system that employs the LiPD standard. [1] www.cs.colorado.edu/ lizb/cscience.html[2] McKay & Emile-Geay, Climate of the Past 12:1093 (2016)

System analysis tools for an ELT at ESO

NASA Astrophysics Data System (ADS)

Mueller, Michael; Koch, Franz

2006-06-01

Engineering of complex, large scale systems like the ELT designs currently investigated and developed in Europe and Northern America require powerful and sophisticated tools within specific technical disciplines such as mechanics, optics and control engineering. However, even analyzing a certain component of the telescope like the telescope structure necessitates a system approach to evaluate the structural effects onto the optical performance. This paper shows several software tools developed by the European Southern Observatory (ESO) which focus onto the system approach in the analyses: Using modal results of a finite element analysis the SMI-toolbox allows an easy generation of structural models with different sizes and levels of accuracy for the control design and closed-loop simulations. The optical modeling code BeamWarrior was developed by ESO and Astrium GmbH, Germany) especially for integrated modeling and interfering with a structural model. Within BeamWarrior displacements and deformations can be applied in an arbitrary coordinate system, and hence also in the global coordinates of the FE model avoiding error prone transformations. In addition to this, a sparse state space model object was developed for Matlab to gain in computational efficiency and reduced memory requirements due to the sparsity pattern of both the structural models and the control architecture. As one result these tools allow building an integrated model in order to reliably simulate interactions, cross-coupling effects, system responses, and to evaluate global performance. In order to evaluate disturbance effects on the optical performance in openloop more efficiently, an optical evaluation toolbox was built in the FE software ANSYS which performs Zernike decomposition and best-fit computation of the deformations directly in the FE analysis.

Development of Modern Performance Assessment Tools and Capabilities for Underground Disposal of Transuranic Waste at WIPP

NASA Astrophysics Data System (ADS)

Zeitler, T.; Kirchner, T. B.; Hammond, G. E.; Park, H.

2014-12-01

The Waste Isolation Pilot Plant (WIPP) has been developed by the U.S. Department of Energy (DOE) for the geologic (deep underground) disposal of transuranic (TRU) waste. Containment of TRU waste at the WIPP is regulated by the U.S. Environmental Protection Agency (EPA). The DOE demonstrates compliance with the containment requirements by means of performance assessment (PA) calculations. WIPP PA calculations estimate the probability and consequence of potential radionuclide releases from the repository to the accessible environment for a regulatory period of 10,000 years after facility closure. The long-term performance of the repository is assessed using a suite of sophisticated computational codes. In a broad modernization effort, the DOE has overseen the transfer of these codes to modern hardware and software platforms. Additionally, there is a current effort to establish new performance assessment capabilities through the further development of the PFLOTRAN software, a state-of-the-art massively parallel subsurface flow and reactive transport code. Improvements to the current computational environment will result in greater detail in the final models due to the parallelization afforded by the modern code. Parallelization will allow for relatively faster calculations, as well as a move from a two-dimensional calculation grid to a three-dimensional grid. The result of the modernization effort will be a state-of-the-art subsurface flow and transport capability that will serve WIPP PA into the future. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. This research is funded by WIPP programs administered by the Office of Environmental Management (EM) of the U.S Department of Energy.

VDJServer: A Cloud-Based Analysis Portal and Data Commons for Immune Repertoire Sequences and Rearrangements.

PubMed

Christley, Scott; Scarborough, Walter; Salinas, Eddie; Rounds, William H; Toby, Inimary T; Fonner, John M; Levin, Mikhail K; Kim, Min; Mock, Stephen A; Jordan, Christopher; Ostmeyer, Jared; Buntzman, Adam; Rubelt, Florian; Davila, Marco L; Monson, Nancy L; Scheuermann, Richard H; Cowell, Lindsay G

2018-01-01

Recent technological advances in immune repertoire sequencing have created tremendous potential for advancing our understanding of adaptive immune response dynamics in various states of health and disease. Immune repertoire sequencing produces large, highly complex data sets, however, which require specialized methods and software tools for their effective analysis and interpretation. VDJServer is a cloud-based analysis portal for immune repertoire sequence data that provide access to a suite of tools for a complete analysis workflow, including modules for preprocessing and quality control of sequence reads, V(D)J gene segment assignment, repertoire characterization, and repertoire comparison. VDJServer also provides sophisticated visualizations for exploratory analysis. It is accessible through a standard web browser via a graphical user interface designed for use by immunologists, clinicians, and bioinformatics researchers. VDJServer provides a data commons for public sharing of repertoire sequencing data, as well as private sharing of data between users. We describe the main functionality and architecture of VDJServer and demonstrate its capabilities with use cases from cancer immunology and autoimmunity. VDJServer provides a complete analysis suite for human and mouse T-cell and B-cell receptor repertoire sequencing data. The combination of its user-friendly interface and high-performance computing allows large immune repertoire sequencing projects to be analyzed with no programming or software installation required. VDJServer is a web-accessible cloud platform that provides access through a graphical user interface to a data management infrastructure, a collection of analysis tools covering all steps in an analysis, and an infrastructure for sharing data along with workflows, results, and computational provenance. VDJServer is a free, publicly available, and open-source licensed resource.

78 FR 47804 - Verification, Validation, Reviews, and Audits for Digital Computer Software Used in Safety...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-06

..., ``Configuration Management Plans for Digital Computer Software used in Safety Systems of Nuclear Power Plants... Digital Computer Software Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear Regulatory..., Reviews, and Audits for Digital Computer Software Used in Safety Systems of Nuclear Power Plants.'' This...

48 CFR 27.404-2 - Limited rights data and restricted computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... restricted computer software. 27.404-2 Section 27.404-2 Federal Acquisition Regulations System FEDERAL... Copyrights 27.404-2 Limited rights data and restricted computer software. (a) General. The basic clause at 52... restricted computer software by withholding the data from the Government and instead delivering form, fit...

48 CFR 252.227-7026 - Deferred delivery of technical data or computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical data or computer software. 252.227-7026 Section 252.227-7026 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(a), use the following clause: Deferred Delivery of Technical Data or Computer Software (APR 1988) The Government shall have the right to require, at...

48 CFR 27.404-2 - Limited rights data and restricted computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... restricted computer software. 27.404-2 Section 27.404-2 Federal Acquisition Regulations System FEDERAL... Copyrights 27.404-2 Limited rights data and restricted computer software. (a) General. The basic clause at 52... restricted computer software by withholding the data from the Government and instead delivering form, fit...

48 CFR 52.227-15 - Representation of Limited Rights Data and Restricted Computer Software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Rights Data and Restricted Computer Software. 52.227-15 Section 52.227-15 Federal Acquisition Regulations... Computer Software. As prescribed in 27.409(c), insert the following provision: Representation of Limited Rights Data and Restricted Computer Software (DEC 2007) (a) This solicitation sets forth the Government's...

48 CFR 252.227-7025 - Limitations on the use or disclosure of government-furnished information marked with restrictive...

Code of Federal Regulations, 2011 CFR

2011-10-01

... contracts in which the Government will furnish the Contractor with computer software or computer software... rights” are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. (3) For Small Business Innovation Research program contracts, the...

48 CFR 27.404-2 - Limited rights data and restricted computer software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... restricted computer software. 27.404-2 Section 27.404-2 Federal Acquisition Regulations System FEDERAL... Copyrights 27.404-2 Limited rights data and restricted computer software. (a) General. The basic clause at 52... restricted computer software by withholding the data from the Government and instead delivering form, fit...

48 CFR 52.227-15 - Representation of Limited Rights Data and Restricted Computer Software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Rights Data and Restricted Computer Software. 52.227-15 Section 52.227-15 Federal Acquisition Regulations... Computer Software. As prescribed in 27.409(c), insert the following provision: Representation of Limited Rights Data and Restricted Computer Software (DEC 2007) (a) This solicitation sets forth the Government's...

48 CFR 252.227-7019 - Validation of asserted restrictions-Computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... restrictions-Computer software. 252.227-7019 Section 252.227-7019 Federal Acquisition Regulations System...—Computer software. As prescribed in 227.7104(e)(3) or 227.7203-6(c), use the following clause: Validation of Asserted Restrictions—Computer Software (JUN 1995) (a) Definitions. (1) As used in this clause...

48 CFR 52.227-15 - Representation of Limited Rights Data and Restricted Computer Software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Rights Data and Restricted Computer Software. 52.227-15 Section 52.227-15 Federal Acquisition Regulations... Computer Software. As prescribed in 27.409(c), insert the following provision: Representation of Limited Rights Data and Restricted Computer Software (DEC 2007) (a) This solicitation sets forth the Government's...

48 CFR 252.227-7019 - Validation of asserted restrictions-Computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... restrictions-Computer software. 252.227-7019 Section 252.227-7019 Federal Acquisition Regulations System...—Computer software. As prescribed in 227.7104(e)(3) or 227.7203-6(c), use the following clause: Validation of Asserted Restrictions—Computer Software (SEP 2011) (a) Definitions. (1) As used in this clause...

48 CFR 252.227-7026 - Deferred delivery of technical data or computer software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technical data or computer software. 252.227-7026 Section 252.227-7026 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(a), use the following clause: Deferred Delivery of Technical Data or Computer Software (APR 1988) The Government shall have the right to require, at...

48 CFR 252.227-7025 - Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive...

Code of Federal Regulations, 2013 CFR

2013-10-01

... contracts in which the Government will furnish the Contractor with computer software or computer software... rights” are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. (3) For Small Business Innovation Research program contracts, the...

48 CFR 252.227-7019 - Validation of asserted restrictions-Computer software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... restrictions-Computer software. 252.227-7019 Section 252.227-7019 Federal Acquisition Regulations System...—Computer software. As prescribed in 227.7104(e)(3) or 227.7203-6(c), use the following clause: Validation of Asserted Restrictions—Computer Software (SEP 2011) (a) Definitions. (1) As used in this clause...

48 CFR 52.227-15 - Representation of Limited Rights Data and Restricted Computer Software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Rights Data and Restricted Computer Software. 52.227-15 Section 52.227-15 Federal Acquisition Regulations... Computer Software. As prescribed in 27.409(c), insert the following provision: Representation of Limited Rights Data and Restricted Computer Software (DEC 2007) (a) This solicitation sets forth the Government's...

48 CFR 27.404-2 - Limited rights data and restricted computer software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... restricted computer software. 27.404-2 Section 27.404-2 Federal Acquisition Regulations System FEDERAL... Copyrights 27.404-2 Limited rights data and restricted computer software. (a) General. The basic clause at 52... restricted computer software by withholding the data from the Government and instead delivering form, fit...

48 CFR 52.227-15 - Representation of Limited Rights Data and Restricted Computer Software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Rights Data and Restricted Computer Software. 52.227-15 Section 52.227-15 Federal Acquisition Regulations... Computer Software. As prescribed in 27.409(c), insert the following provision: Representation of Limited Rights Data and Restricted Computer Software (DEC 2007) (a) This solicitation sets forth the Government's...

48 CFR 252.227-7026 - Deferred delivery of technical data or computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... technical data or computer software. 252.227-7026 Section 252.227-7026 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(a), use the following clause: Deferred Delivery of Technical Data or Computer Software (APR 1988) The Government shall have the right to require, at...

48 CFR 252.227-7025 - Limitations on the use or disclosure of government-furnished information marked with restrictive...

Code of Federal Regulations, 2012 CFR

2012-10-01

... contracts in which the Government will furnish the Contractor with computer software or computer software... rights” are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. (3) For Small Business Innovation Research program contracts, the...

48 CFR 252.227-7019 - Validation of asserted restrictions-Computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... restrictions-Computer software. 252.227-7019 Section 252.227-7019 Federal Acquisition Regulations System...—Computer software. As prescribed in 227.7104(e)(3) or 227.7203-6(c), use the following clause: Validation of Asserted Restrictions—Computer Software (SEP 2011) (a) Definitions. (1) As used in this clause...

48 CFR 252.227-7026 - Deferred delivery of technical data or computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... technical data or computer software. 252.227-7026 Section 252.227-7026 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(a), use the following clause: Deferred Delivery of Technical Data or Computer Software (APR 1988) The Government shall have the right to require, at...

48 CFR 252.227-7025 - Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive...

Code of Federal Regulations, 2014 CFR

2014-10-01

... contracts in which the Government will furnish the Contractor with computer software or computer software... rights” are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation. (3) For Small Business Innovation Research program contracts, the...

48 CFR 252.227-7019 - Validation of asserted restrictions-Computer software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... restrictions-Computer software. 252.227-7019 Section 252.227-7019 Federal Acquisition Regulations System...—Computer software. As prescribed in 227.7104(e)(3) or 227.7203-6(c), use the following clause: Validation of Asserted Restrictions—Computer Software (SEP 2011) (a) Definitions. (1) As used in this clause...

48 CFR 252.227-7026 - Deferred delivery of technical data or computer software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... technical data or computer software. 252.227-7026 Section 252.227-7026 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(a), use the following clause: Deferred Delivery of Technical Data or Computer Software (APR 1988) The Government shall have the right to require, at...

48 CFR 27.404-2 - Limited rights data and restricted computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... restricted computer software. 27.404-2 Section 27.404-2 Federal Acquisition Regulations System FEDERAL... Copyrights 27.404-2 Limited rights data and restricted computer software. (a) General. The basic clause at 52... restricted computer software by withholding the data from the Government and instead delivering form, fit...

Data to Pictures to Data: Outreach Imaging Software and Metadata

NASA Astrophysics Data System (ADS)

Levay, Z.

2011-07-01

A convergence between astronomy science and digital photography has enabled a steady stream of visually rich imagery from state-of-the-art data. The accessibility of hardware and software has facilitated an explosion of astronomical images for outreach, from space-based observatories, ground-based professional facilities and among the vibrant amateur astrophotography community. Producing imagery from science data involves a combination of custom software to understand FITS data (FITS Liberator), off-the-shelf, industry-standard software to composite multi-wavelength data and edit digital photographs (Adobe Photoshop), and application of photo/image-processing techniques. Some additional effort is needed to close the loop and enable this imagery to be conveniently available for various purposes beyond web and print publication. The metadata paradigms in digital photography are now complying with FITS and science software to carry information such as keyword tags and world coordinates, enabling these images to be usable in more sophisticated, imaginative ways exemplified by Sky in Google Earth and World Wide Telescope.