Identification of stars and digital version of the catalogue of 1958 by Brodskaya and Shajn

NASA Astrophysics Data System (ADS)

Gorbunov, M. A.; Shlyapnikov, A. A.

2017-12-01

The following topics are considered: the identification of objects on search maps, the determination of their coordinates at the epoch of 2000, and converting the published version of the catalogue of 1958 by Brodskaya and Shajn into a machine-readable format. The statistics for photometric and spectral data from the original catalogue is presented. A digital version of the catalogue is described, as well as its presentation in HTML, VOTable and AJS formats and the basic principles of work in the interactive application of International Virtual Observatory - the Aladin Sky Atlas.

Roma-BZCAT: a multifrequency catalogue of blazars

NASA Astrophysics Data System (ADS)

Massaro, E.; Giommi, P.; Leto, C.; Marchegiani, P.; Maselli, A.; Perri, M.; Piranomonte, S.; Sclavi, S.

2009-02-01

We present a new catalogue of blazars based on multifrequency surveys and on an extensive review of the literature. Blazars are classified as BL Lacertae objects, as flat spectrum radio quasars or as blazars of uncertain/transitional type. Each object is identified by a root name, coded as BZB, BZQ and BZU for these three subclasses respectively, and by its coordinates. This catalogue is being built as a tool useful for the identification of the extragalactic sources that will be detected by present and future experiments for X and gamma-ray astronomy, like Swift, AGILE, Fermi-GLAST and Simbol-X. An electronic version is available from the ASI Science Data Center web site at http://www.asdc.asi.it/bzcat.

VizieR Online Data Catalog: Torun catalog of post-AGB and related objects (Szczerba+, 2007)

NASA Astrophysics Data System (ADS)

Szczerba, R.; Siodmiak, N.; Stasinska, G.; Borkowski, J.

2007-09-01

With the ongoing AKARI infrared sky survey, of much greater sensitivity than IRAS, a wealth of post-AGB objects may be discovered. It is thus time to organize our present knowledge of known post-AGB stars in the galaxy with a view to using it to search for new post-AGB objects among AKARI sources. We searched the literature available on the NASA Astrophysics Data System up to 1 October 2006, and defined criteria for classifying sources into three categories: very likely, possible and disqualified post-AGB objects. The category of very likely post-AGB objects is made up of several classes. We have created an evolutionary, on-line catalogue of Galactic post-AGB objects, to be referred to as the Torun catalogue of Galactic post-AGB and related objects. The present version of the catalogue contains 326 very likely, 107 possible and 64 disqualified objects. For the very likely post-AGB objects, the catalogue gives the available optical and infrared photometry, infrared spectroscopy and spectral types, and links to finding charts and bibliography. (3 data files).

Documentation for the machine-readable version of the Fourth Cambridge Radio Survey Catalogue (4C) (Pilkington, Gower, Scott and Wills 1965, 1967)

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1983-01-01

The machine readable catalogue contains survey data from the papers of Pilkington and Scott and Gower, Scott and Wills. These data result from a survey of radio sources between declinations -07 deg and +80 deg using the large Cambridge interferometer at 178 MHz. The computerized catalog contains for each source the 4C number, 1950 position, measured flux density, and accuracy class. For some sources miscellaneous brief comments such as cross identifications to the 3C catalog or remarks on contamination from nearby sources are given at the ends of the data records. A detailed description of the machine readable catalog as it is currently being distributed by the Astronomical Data Center is given to enable users to read and process the data.

VizieR Online Data Catalog: de Houtman, Kepler and Halley star catalogs (Verbunt+ 2011)

NASA Astrophysics Data System (ADS)

Verbunt, F.; van Gent, R. H.

2011-04-01

We present Machine-readable versions of the star catalogues of de Houtman (1602), Kepler (1627: Secunda Classis and Tertia Classis) and Halley (1679). In addition to the data from the Historical catalogue, the machine-readable version contains the modern identification with a Hipparcos star and the latter's magnitude, and based on this identification the positional accuracy. For Kepler's catalogues we also give cross references to the catalogue of Ptolemaios (in the edition by Toomer 1998). (4 data files).

Documentation for the machine-readable version of the revised new general catalogue of nonstellar astronomical objects

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1982-01-01

The contents and format of the machine-readable version of the cataloque distributed by the Astronomical Data Center are described. Coding for the various scales and abbreviations used in the catalogue are tabulated and certain revisions to the machine version made to improve storage efficiency and notation are discussed.

Documentation for the machine-readable version of the Morphological Catalogue of Galaxies (MCG) of Vorontsov-Velyaminov et al, 1962-1968

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1982-01-01

Modifications, corrections, and the record format are provided for the machine-readable version of the "Morphological Catalogue of Galaxies.' In addition to hundreds of individual corrections, a detailed comparison of the machine-readable with the published catalogue resulted in the addition of 116 missing objects, the deletion of 10 duplicate records, and a format modification to increase storage efficiency.

Catalogues of planetary nebulae.

NASA Astrophysics Data System (ADS)

Acker, A.

Firstly, the general requirements concerning catalogues are studied for planetary nebulae, in particular concerning the objects to be included in a catalogue of PN, their denominations, followed by reflexions about the afterlife and comuterized versions of a catalogue. Then, the basic elements constituting a catalogue of PN are analyzed, and the available data are looked at each time.

ShakeMap Atlas 2.0: an improved suite of recent historical earthquake ShakeMaps for global hazard analyses and loss model calibration

USGS Publications Warehouse

Garcia, D.; Mah, R.T.; Johnson, K.L.; Hearne, M.G.; Marano, K.D.; Lin, K.-W.; Wald, D.J.

2012-01-01

We introduce the second version of the U.S. Geological Survey ShakeMap Atlas, which is an openly-available compilation of nearly 8,000 ShakeMaps of the most significant global earthquakes between 1973 and 2011. This revision of the Atlas includes: (1) a new version of the ShakeMap software that improves data usage and uncertainty estimations; (2) an updated earthquake source catalogue that includes regional locations and finite fault models; (3) a refined strategy to select prediction and conversion equations based on a new seismotectonic regionalization scheme; and (4) vastly more macroseismic intensity and ground-motion data from regional agencies All these changes make the new Atlas a self-consistent, calibrated ShakeMap catalogue that constitutes an invaluable resource for investigating near-source strong ground-motion, as well as for seismic hazard, scenario, risk, and loss-model development. To this end, the Atlas will provide a hazard base layer for PAGER loss calibration and for the Earthquake Consequences Database within the Global Earthquake Model initiative.

VizieR Online Data Catalog: Catalogue of variable stars in open clusters (Zejda+, 2012)

NASA Astrophysics Data System (ADS)

Zejda, M.; Paunzen, E.; Baumann, B.; Mikulasek, Z.; Liska, J.

2012-08-01

The catalogue of variable stars in open clusters were prepared by cross-matching of Variable Stars Index (http://www.aavso.org/vsx) version Apr 29, 2012 (available online, Cat. B/vsx) against the version 3.1. catalogue of open clusters DAML02 (Dias et al. 2002A&A...389..871D, Cat. B/ocl) available on the website http://www.astro.iag.usp.br/~wilton. The open clusters were divided into two categories according to their size, where the limiting diameter was 60 arcmin. The list of all suspected variables and variable stars located within the fields of open clusters up to two times of given cluster radius were generated (Table 1). 8938 and 9127 variable stars are given in 461 "smaller" and 74 "larger" clusters, respectively. All found variable stars were matched against the PPMXL catalog of positions and proper motions within the ICRS (Roeser et al., 2010AJ....139.2440R, Cat. I/317). Proper motion data were included in our catalogue. Unfortunately, a homogeneous data set of mean cluster proper motions has not been available until now. Therefore we used the following sources (sorted alphabetically) to compile a new catalogue: Baumgardt et al. (2000, Cat. J/A+AS/146/251): based on the Hipparcos catalogue Beshenov & Loktin (2004A&AT...23..103B): based on the Tycho-2 catalogue Dias et al. (2001, Cat. J/A+A/376/441, 2002A&A...389..871D, Cat. B/ocl): based on the Tycho-2 catalogue Dias et al. (2006, Cat. J/A+A/446/949): based on the UCAC2 catalog (Zacharias et al., 2004AJ....127.3043Z, Cat. I/289) Frinchaboy & Majewski (2008, Cat. J/AJ/136/118): based on the Tycho-2 catalogue Kharchenko et al. (2005, J/A+A/438/1163): based on the ASCC2.5 catalogue (Kharchenko, 2001KFNT...17..409K, Cat. I/280) Krone-Martins et al. (2010, Cat. J/A+A/516/A3): based on the Bordeaux PM2000 proper motion catalogue (Ducourant et al., 2006A&A...448.1235D, Cat. I/300) Robichon et al. (1999, Cat. J/A+A/345/471): based on the Hipparcos catalogue van Leeuwen (2009A&A...497..209V): based on the new Hipparcos catalogue. In total, a catalogue of proper motions for 879 open clusters (Table 2), from which 436 have more than one available measurement, was compiled. (3 data files).

Documentation for the machine-readable version of the ANS Ultraviolet Photometry Catalogue of Point Sources (Wesselius et al 1982)

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1984-01-01

The machine-readable version of the Astronomical Netherlands Satellite ultraviolet photometry catalog is described in detail, with a byte-by-byte format description and characteristics of the data file given. The catalog is a compilation of ultraviolet photometry in five bands, within the wavelength range 155 nm to 330 nm, for 3573 mostly stellar objects. Additional cross reference data (object identification, UBV photometry and MK spectral types) are included in the catalog.

Astronomical Catalogues - Definition Elements and Afterlife

NASA Astrophysics Data System (ADS)

Jaschek, C.

1984-09-01

Based on a look at the different meanings of the term catalogue (or catalog), a definition is proposed. In an analysis of the main elements, a number of requirements that catalogues should satisfy are pointed out. A section is devoted to problems connected with computer-readable versions of printed catalogues.

Planck 2013 results. XXXII. The updated Planck catalogue of Sunyaev-Zeldovich sources

NASA Astrophysics Data System (ADS)

Planck Collaboration; Ade, P. A. R.; Aghanim, N.; Armitage-Caplan, C.; Arnaud, M.; Ashdown, M.; Atrio-Barandela, F.; Aumont, J.; Aussel, H.; Baccigalupi, C.; Banday, A. J.; Barreiro, R. B.; Barrena, R.; Bartelmann, M.; Bartlett, J. G.; Battaner, E.; Benabed, K.; Benoît, A.; Benoit-Lévy, A.; Bernard, J.-P.; Bersanelli, M.; Bielewicz, P.; Bikmaev, I.; Bobin, J.; Bock, J. J.; Böhringer, H.; Bonaldi, A.; Bond, J. R.; Borrill, J.; Bouchet, F. R.; Bridges, M.; Bucher, M.; Burenin, R.; Burigana, C.; Butler, R. C.; Cardoso, J.-F.; Carvalho, P.; Catalano, A.; Challinor, A.; Chamballu, A.; Chary, R.-R.; Chen, X.; Chiang, H. C.; Chiang, L.-Y.; Chon, G.; Christensen, P. R.; Churazov, E.; Church, S.; Clements, D. L.; Colombi, S.; Colombo, L. P. L.; Comis, B.; Couchot, F.; Coulais, A.; Crill, B. P.; Curto, A.; Cuttaia, F.; Da Silva, A.; Dahle, H.; Danese, L.; Davies, R. D.; Davis, R. J.; de Bernardis, P.; de Rosa, A.; de Zotti, G.; Delabrouille, J.; Delouis, J.-M.; Démoclès, J.; Désert, F.-X.; Dickinson, C.; Diego, J. M.; Dolag, K.; Dole, H.; Donzelli, S.; Doré, O.; Douspis, M.; Dupac, X.; Efstathiou, G.; Enßlin, T. A.; Eriksen, H. K.; Feroz, F.; Ferragamo, A.; Finelli, F.; Flores-Cacho, I.; Forni, O.; Frailis, M.; Franceschi, E.; Fromenteau, S.; Galeotta, S.; Ganga, K.; Génova-Santos, R. T.; Giard, M.; Giardino, G.; Gilfanov, M.; Giraud-Héraud, Y.; González-Nuevo, J.; Górski, K. M.; Grainge, K. J. B.; Gratton, S.; Gregorio, A.; Groeneboom, N., E.; Gruppuso, A.; Hansen, F. K.; Hanson, D.; Harrison, D.; Hempel, A.; Henrot-Versillé, S.; Hernández-Monteagudo, C.; Herranz, D.; Hildebrandt, S. R.; Hivon, E.; Hobson, M.; Holmes, W. A.; Hornstrup, A.; Hovest, W.; Huffenberger, K. M.; Hurier, G.; Hurley-Walker, N.; Jaffe, A. H.; Jaffe, T. R.; Jones, W. C.; Juvela, M.; Keihänen, E.; Keskitalo, R.; Khamitov, I.; Kisner, T. S.; Kneissl, R.; Knoche, J.; Knox, L.; Kunz, M.; Kurki-Suonio, H.; Lagache, G.; Lähteenmäki, A.; Lamarre, J.-M.; Lasenby, A.; Laureijs, R. J.; Lawrence, C. R.; Leahy, J. P.; Leonardi, R.; León-Tavares, J.; Lesgourgues, J.; Li, C.; Liddle, A.; Liguori, M.; Lilje, P. B.; Linden-Vørnle, M.; López-Caniego, M.; Lubin, P. M.; Macías-Pérez, J. F.; MacTavish, C. J.; Maffei, B.; Maino, D.; Mandolesi, N.; Maris, M.; Marshall, D. J.; Martin, P. G.; Martínez-González, E.; Masi, S.; Massardi, M.; Matarrese, S.; Matthai, F.; Mazzotta, P.; Mei, S.; Meinhold, P. R.; Melchiorri, A.; Melin, J.-B.; Mendes, L.; Mennella, A.; Migliaccio, M.; Mikkelsen, K.; Mitra, S.; Miville-Deschênes, M.-A.; Moneti, A.; Montier, L.; Morgante, G.; Mortlock, D.; Munshi, D.; Murphy, J. A.; Naselsky, P.; Nastasi, A.; Nati, F.; Natoli, P.; Nesvadba, N. P. H.; Netterfield, C. B.; Nørgaard-Nielsen, H. U.; Noviello, F.; Novikov, D.; Novikov, I.; O'Dwyer, I. J.; Olamaie, M.; Osborne, S.; Oxborrow, C. A.; Paci, F.; Pagano, L.; Pajot, F.; Paoletti, D.; Pasian, F.; Patanchon, G.; Pearson, T. J.; Perdereau, O.; Perotto, L.; Perrott, Y. C.; Perrotta, F.; Piacentini, F.; Piat, M.; Pierpaoli, E.; Pietrobon, D.; Plaszczynski, S.; Pointecouteau, E.; Polenta, G.; Ponthieu, N.; Popa, L.; Poutanen, T.; Pratt, G. W.; Prézeau, G.; Prunet, S.; Puget, J.-L.; Rachen, J. P.; Reach, W. T.; Rebolo, R.; Reinecke, M.; Remazeilles, M.; Renault, C.; Ricciardi, S.; Riller, T.; Ristorcelli, I.; Rocha, G.; Rosset, C.; Roudier, G.; Rowan-Robinson, M.; Rubiño-Martín, J. A.; Rumsey, C.; Rusholme, B.; Sandri, M.; Santos, D.; Saunders, R. D. E.; Savini, G.; Schammel, M. P.; Scott, D.; Seiffert, M. D.; Shellard, E. P. S.; Shimwell, T. W.; Spencer, L. D.; Starck, J.-L.; Stolyarov, V.; Stompor, R.; Streblyanska, A.; Sudiwala, R.; Sunyaev, R.; Sureau, F.; Sutton, D.; Suur-Uski, A.-S.; Sygnet, J.-F.; Tauber, J. A.; Tavagnacco, D.; Terenzi, L.; Toffolatti, L.; Tomasi, M.; Tramonte, D.; Tristram, M.; Tucci, M.; Tuovinen, J.; Türler, M.; Umana, G.; Valenziano, L.; Valiviita, J.; Van Tent, B.; Vibert, L.; Vielva, P.; Villa, F.; Vittorio, N.; Wade, L. A.; Wandelt, B. D.; White, M.; White, S. D. M.; Yvon, D.; Zacchei, A.; Zonca, A.

2015-09-01

We update the all-sky Planck catalogue of 1227 clusters and cluster candidates (PSZ1) published in March 2013, derived from detections of the Sunyaev-Zeldovich (SZ) effect using the first 15.5 months of Planck satellite observations. As an addendum, we deliver an updated version of the PSZ1 catalogue, reporting the further confirmation of 86 Planck-discovered clusters. In total, the PSZ1 now contains 947 confirmed clusters, of which 214 were confirmed as newly discovered clusters through follow-up observations undertaken by the Planck Collaboration. The updated PSZ1 contains redshifts for 913 systems, of which 736 (~ 80.6%) are spectroscopic, and associated mass estimates derived from the Yz mass proxy. We also provide a new SZ quality flag for the remaining 280 candidates. This flag was derived from a novel artificial neural-network classification of the SZ signal. Based on this assessment, the purity of the updated PSZ1 catalogue is estimated to be 94%. In this release, we provide the full updated catalogue and an additional readme file with further information on the Planck SZ detections. The catalogue is only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/581/A14

Harwell Subroutine Library. A Catalogue of Subroutines (1973),

DTIC Science & Technology

1973-07-01

up the equations AT Ax = ATb. There may be more than one right-hand size. Remark: If the solution is required see MAO9A. Versions: MAOA ; MAOBAD. Calls...Hermitian MEO8A source decks-modification of OEOIA real gene .’al to Hessenberg sparsity pattern TDO2A MC08A, MCI4A spherical co-ordinates GAOIA real

The AC 2000.2 Catalogue

NASA Astrophysics Data System (ADS)

Urban, S. E.; Corbin, T. E.; Wycoff, G. L.; Makarov, V. V.; Høg, E.; Fabricius, C.

2001-12-01

For over 100 years, the international project known as the Astrographic Catalogue -- which involved 20 observatories tasked to photograph the sky -- has held an unfulfilled promised of yielding a wealth of astrometric information. This promise was not realized due to the inadequate reductions of the project's plates. However, in 1997 the U.S. Naval Observatory (USNO) completed the reductions of the 22,660 plates. That catalogue, named the AC 2000, contained positions and magnitudes for 4.6 million stars down to about v magnitude 12.5. Due to the early epochs of the data -- averaging 1907 -- and the positional accuracies -- between 150 and 400 milliarcseconds -- the data are extremely valuable in computing proper motions. In 1997, these positions were used to form the proper motions of the ACT Reference Catalogue. In 1999, USNO and Copenhagen University Observatory (CUO) partnered to create the Tycho-2 Catalogue. The CUO group re-analyzed the data from the Tycho experiment on the Hipparcos satellite. The USNO group re-analyzed over 140 positional catalogs which were combined with the expanded Tycho positions from the CUO group to compute the Tycho-2 proper motions. The largest contributor to these proper motions was the re-analyzed Astrographic Catalogue; the latest version being known as the AC 2000.2 Catalogue. There are two major differences between the AC 2000 and the AC 2000.2. First, the reference catalog used in AC 2000.2 was an expanded version of the Astrographic Catalogue Reference Stars that was rigorously derived on the Hipparcos Celestial Reference Frame. The second is that AC 2000.2 contains photometry from Tycho-2, where available. A description of the AC 2000.2 Catalogue, the reduction techniques used, how it compares with the 1997 version, and information on obtaining the data will be presented.

VizieR Online Data Catalog: X-ray+Radio sources in XBootes (El Bouchefry, 2009)

NASA Astrophysics Data System (ADS)

El Bouchefry, K.

2010-08-01

The radio data are from the 2002 version of the FIRST VLA catalogue (Becker et al., 1995, See Cat. VIII/71), and it is derived from 1993 through 2002 observations. The X-ray data (Kenter et al. 2005, Cat. J/ApJS/161/9; Murray et al. 2005ApJS..161....1M) used in this paper are from the Chandra XBootes surveys. The XBootes catalogue contains ~3213 X-ray point sources and is publicly available through the National Optical Astronomy Observatory (NOAO) Deep Wide Field Survey (NDWFS) homepage (http://www.noao.edu/noao/noaodeep/XBootesPublic/index.html) The NDWFS is a deep multiband imaging (Bw, R, I, J, H, K) designed to study the formation and evolution of large-scale structures (Jannuzi et al., 1999, BAAS, 31, 1392; Brown et al., 2003ApJ...597..225B). (1 data file).

Luminosity Classes of M-Stars in the SAO Catalogue

NASA Astrophysics Data System (ADS)

Robertson, T. H.

1986-08-01

A list of potential M dwarf stars was compiled from a magnetic-tape version of the Smithsonian Astrophysical Observatory star catalogue (SAO) (Smithsonian Astrophysical Observatory 1966) using an assumed thickness of 600 pc for the galactic plane as suggested by Nunez and Figueras (1983). Calculations of the number of M stars brighter than various limiting magnitudes based on known luminosity functions of dwarf and giant M stars show that the vast majority of sample stars are probably M giant stars rather than M dwarf stars having low transverse velocities. Analyses of the distribution in galactic longitude and latitude as well as the kinematic properties of this sample and of data from other published sources supporting this conclusion are also presented.

VizieR Online Data Catalog: Chromospherically Active Binaries. Third version (Eker+, 2008)

NASA Astrophysics Data System (ADS)

Eker, Z.; Filiz-Ak, N.; Bilir, S.; Dogru, D.; Tuysuz, M.; Soydugan, E.; Bakis, H.; Ugras, B.; Soydugan, F.; Erdem, A.; Demircan, O.

2008-06-01

Chromospherically Active Binaries (CAB) catalogue have been revised and updated. With 203 new identifications, the number of CAB stars is increased to 409. Catalogue is available in electronic format where each system has various number of lines (sub-orders) with a unique order number. Columns contain data of limited number of selected cross references, comments to explain peculiarities and position of the binarity in case it belongs to a multiple system, classical identifications (RS CVn, BY Dra), brightness and colours, photometric and spectroscopic data, description of emission features (Ca II H&K, Hα, UV, IR), X-Ray luminosity, radio flux, physical quantities and orbital information, where each basic entry are referenced so users can go original sources. (10 data files).

Historical earthquakes studies in Eastern Siberia: State-of-the-art and plans for future

NASA Astrophysics Data System (ADS)

Radziminovich, Ya. B.; Shchetnikov, A. A.

2013-01-01

Many problems in investigating historical seismicity of East Siberia remain unsolved. A list of these problems may refer particularly to the quality and reliability of data sources, completeness of parametric earthquake catalogues, and precision and transparency of estimates for the main parameters of historical earthquakes. The main purpose of this paper is to highlight the current status of the studies of historical seismicity in Eastern Siberia, as well as analysis of existing macroseismic and parametric earthquake catalogues. We also made an attempt to identify the main shortcomings of existing catalogues and to clarify the reasons for their appearance in the light of the history of seismic observations in Eastern Siberia. Contentious issues in the catalogues of earthquakes are considered by the example of three strong historical earthquakes, important for assessing seismic hazard in the region. In particular, it was found that due to technical error the parameters of large M = 7.7 earthquakes of 1742 were transferred from the regional catalogue to the worldwide database with incorrect epicenter coordinates. The way some stereotypes concerning active tectonics influences on the localization of the epicenter is shown by the example of a strong М = 6.4 earthquake of 1814. Effect of insufficient use of the primary data source on completeness of earthquake catalogues is illustrated by the example of a strong M = 7.0 event of 1859. Analysis of the state-of-the-art of historical earthquakes studies in Eastern Siberia allows us to propose the following activities in the near future: (1) database compilation including initial descriptions of macroseismic effects with reference to their place and time of occurrence; (2) parameterization of the maximum possible (magnitude-unlimited) number of historical earthquakes on the basis of all the data available; (3) compilation of an improved version of the parametric historical earthquake catalogue for East Siberia with detailed consideration of each event and distinct logic schemes for data interpretation. Thus, we can make the conclusion regarding the necessity of a large-scale revision in historical earthquakes catalogues for the area of study.

Documentation for the machine-readable version of the University of Michigan Catalogue of two-dimensional spectral types for the HD stars. Volume 2: Declinations minus 53 deg to minus 40 deg

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1981-01-01

The magnetic tape version of Volume 2 of the University of Michigan systematic reclassification program for the Henry Draper Catalogue (HD) stars is described. Volume 2 contains all HD stars in the declination range -53 degrees to 40 degrees and also exists in printed form.

Framework for more standardized evaluation of crater detection algorithms

NASA Astrophysics Data System (ADS)

Salamuniccar, G.; Loncaric, S.

Crater detection algorithms CDAs applications range from approximating the age of a planetary surface and autonomous landing to planets and asteroids to advanced statistical analyses ASR 33 2281-2287 The simplest evaluation of CDAs is visual comparison of detected craters with topography More advanced evaluations include comparison with craters catalogue s and cumulative size-frequency distribution s as well as use of Receiver Operating Characteristics ROC However in order for evaluation results from different papers to be comparable more standardized evaluation of CDAs is required As a first step the catalogue of 17582 craters was assembled which can be used as ground truth GT in future evaluations of CDAs 37 th LPS 1137 Each crater from this catalogue is aligned with MOLA topography and confirmed by three independent sources 1 catalogue from N G Barlow et al 2 catalogue from J F Rodionova et al and 3 revised version of catalogue used in previous work 34 th LPS 1403 As a second step a method for estimation of false detections for CDAs is proposed which in combination with known GT and other available analyses can improve evaluation of CDAs 37 th LPS 1138 While those two steps are important there are also some other requirements as e g usability of framework and flexibility for possible improvements of used data and methodology For CDAs that cannot use MOLA data as input visual images were generated using different projections and shadowing Tools are also provided for analysis

VizieR Online Data Catalog: Asiago Supernova Catalogue (Version 2008-Mar)

NASA Astrophysics Data System (ADS)

Barbon, R.; Buondi, V.; Cappellaro, E.; Turatto, M.

2008-02-01

This catalogue supersedes the previous version by Barbon et al. (1999A&AS..139..531B, Cat. II/227), and contains data about the supernovae observed since 1895 and their parent galaxies until the beginning of 2008. In addition to the list of newly discovered SNe, the literature has been searched for new information on past SNe as well. The data for the parent galaxies have also been homogenized. (1 data file).

VizieR Online Data Catalog: z>~5 AGN in Chandra Deep Field-South (Weigel+, 2015)

NASA Astrophysics Data System (ADS)

Weigel, A. K.; Schawinski, K.; Treister, E.; Urry, C. M.; Koss, M.; Trakhtenbrot, B.

2015-09-01

The Chandra 4-Ms source catalogue by Xue et al. (2011, Cat. J/ApJS/195/10) is the starting point of this work. It contains 740 sources and provides counts and observed frame fluxes in the soft (0.5-2keV), hard (2-8keV) and full (0.5-8keV) band. All object IDs used in this work refer to the source numbers listed in the Xue et al. (2011, Cat. J/ApJS/195/10) Chandra 4-Ms catalogue. We make use of Hubble Space Telescope (HST)/Advanced Camera for Surveys (ACS) data from the Great Observatories Origins Deep Survey South (GOODS-south) in the optical wavelength range. We use catalogues and images for filters F435W (B), F606W (V), F775W (i) and 850LP (z) from the second GOODS/ACS data release (v2.0; Giavalisco et al., 2004, Cat. II/261). We use Cosmic Assembly Near-infrared Deep Extragalactic Legacy Survey (CANDELS) Wide Field Camera 3 (WFC3)/infrared data from the first data release (DR1, v1.0) for passbands F105W (Y), F125W (J) and F160W (H) (Grogin et al., 2011ApJS..197...35G; Koekemoer et al., 2011ApJS..197...36K). To determine which objects are red, dusty, low-redshift interlopers, we also include the 3.6 and 4.5 micron Spitzer Infrared Array Camera (IRAC) channels. We use SIMPLE image data from the DR1 (van Dokkum et al., 2005, Spitzer Proposal, 2005.20708) and the first version of the extended SIMPLE catalogue by Damen et al. (2011, Cat. J/ApJ/727/1). (6 data files).

Distributed health care imaging information systems

NASA Astrophysics Data System (ADS)

Thompson, Mary R.; Johnston, William E.; Guojun, Jin; Lee, Jason; Tierney, Brian; Terdiman, Joseph F.

1997-05-01

We have developed an ATM network-based system to collect and catalogue cardio-angiogram videos from the source at a Kaiser central facility and make them available for viewing by doctors at primary care Kaiser facilities. This an example of the general problem of diagnostic data being generated at tertiary facilities, while the images, or other large data objects they produce, need to be used from a variety of other locations such as doctor's offices or local hospitals. We describe the use of a highly distributed computing and storage architecture to provide all aspects of collecting, storing, analyzing, and accessing such large data-objects in a metropolitan area ATM network. Our large data-object management system provides network interface between the object sources, the data management system and the user of the data. As the data is being stored, a cataloguing system automatically creates and stores condensed versions of the data, textural metadata and pointers to the original data. The catalogue system provides a Web-based graphical interface to the data. The user is able the view the low-resolution data with a standard Internet connection and Web browser. If high-resolution is required, a high-speed connection and special application programs can be used to view the high-resolution original data.

The second ROSAT All-Sky Survey source catalogue: the deepest X-ray All-Sky Survey before eROSITA

NASA Astrophysics Data System (ADS)

Boller, T.; Freyberg, M.; Truemper, J.

2014-07-01

We present the second ROSAT all-sky survey source catalogue (RASS2, (Boller, Freyberg, Truemper 2014, submitted)). The RASS2 is an extension of the ROSAT Bright Source Catalogue (BSC) and the ROSAT Faint Source Catalogue (FSC). The total number of sources in the second RASS catalogue is 124489. The extensions include (i) the supply of new user data products, i.e., X-ray images, X-ray spectra, and X-ray light curves, (ii) a visual screening of each individual detection, (iii) an improved detection algorithm compared to the SASS II processing. This results into an as most as reliable and as most as complete catalogue of point sources detected during the ROSAT Survey observations. We discuss for the first time the intra-day timing and spectral properties of the second RASS catalogue. We find new highly variable sources and we discuss their timing properties. Power law fits have been applied which allows to determine X-ray fluxes, X-ray absorbing columns, and X-ray photon indices. We give access to the second RASS catalogue and the associated data products via a web-interface to allow the community to perform further scientific exploration. The RASS2 catalogue provides the deepest X-ray All-Sky Survey before eROSITA data will become available.

Version 2000 of the Catalogue of Galactic Planetary Nebulae

NASA Astrophysics Data System (ADS)

Kohoutek, L.

2001-11-01

The ``Catalogue of Galactic Planetary Nebulae (Version 2000)'' appears in Abhandlungen aus der Hamburger Sternwarte, Band XII in the year 2001. It is a continuation of CGPN(1967) and contains 1510 objects classified as galactic PNe up to the end of 1999. The lists of possible pre-PNe and possible post-PNe are also given. The catalogue is restricted only to the data belonging to the location and identification of the objects. It gives identification charts of PNe discovered since 1965 (published in the supplements to CGPN) and those charts of objects discovered earlier, which have wrong or uncertain identification. The question ``what is a planetary nebula'' is discussed and the typical values of PNe and of their central stars are summarized. Short statistics about the discoveries of PNe are given. The catalogue is also available in the Centre de Données, Strasbourg and at Hamburg Observatory via internet. The Catalogue is only available in electronic form at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsweb.u-strasbg.fr/cgi-bin/qcat?J/A+A/378/843

The Figaro experiment for the observation of time marked sources in the low energy gamma-ray range

NASA Technical Reports Server (NTRS)

Agnetta, G.; Agrinier, B.; Chabaud, J. P.; Costa, E.; Diraffaele, R.; Frabel, P.; Gerardi, G.; Gouiffes, C.; Landrea, M. F.; Mandrou, P.

1985-01-01

The only two firmly identified galactic gamma-ray sources in the second COS B catalogue are the pulsars PSR 0531+21 (Crab) and PSR 0833-45 (Vela). In the region between 100 keV and 10 MeV the detailed shape of the emission is particularly important, since one expects a turn-off which is related to geometry of the source. A marginal evidence of such a turn-off just below 1 MeV has been reported for the Vela pulsar. In order to study sources with a well marked time signature in this energy band, the FIGARO - French Italian Gamma Ray Observatory was designed. The first version was launched in November 1983 from the Sao Manuel base (Brazil), and was destroyed in a free fall following a balloon burst at an altitude of 50 mbar. A brief description is given of the new improved version of the experiment, FIGARO 2, which is nearly completed and whose launch is scheduled before summer 1986.

VizieR Online Data Catalog: Catalogue of Radio Stars (Wendker, 2001)

NASA Astrophysics Data System (ADS)

Wendker, H. J.

2015-06-01

The first version of this catalogue was published in Abh.Hamburger Sternw. 1978, Vol.10, p 1ff. (CDS Catalogue II/129). A second version was published in 1987 (1987A&AS...69...87W) and microfiches (CDS Catalogue II/147). A third version was published 1995A&AS..109..177W (CDS Catalogue II/199). The basic concept of the earlier versions is preserved (in file "catalog.txt"), namely one entry per star per frequency per paper. Space is now provided, however, to add more informations. These may be of technical or astronomical nature. Usually month and year of observation and the number of independent data points or length of monitoring session are given. In the file "catalog.txt", all radio data are preceded by a header which contains information on the star or stellar system. (Note, that a physical stellar system is regarded as one single entry and that comments pertaining to individual components are found directly behind the observational data). Stellar data like names, position, proper motion, magnitudes and spectroscopic types are given in fixed format in a self-explanatory fashion. It is tried to have typical values from commonly available references. It is not intended to compete here with other compilations. These header informations are collected when the star is entered for the first time. They are only changed when new values are available while additional radio references are added. An arbitrarily expandable section for unformatted text finishes the header. Finally, the units of the radio data remain in MHz (column#1) and mJy (columns #2. and #3). All coordinates refer to epoch and equinox 1950.0 (e.g. B1950). This is a so-called merged version e.g. all stars, those detected at least once and those with upper limits only, are listed in order of ascending right ascension. The detected stars are marked with a "D" in the outermost right hand column in lines 1 to 5 ('D' in column "Det" of the file "stars.dat"). The last updating occurred on 2001-Mar-06. In this version stars have new running numbers. (4 data files).

Nano-JASMINE: Simulation of Data Outputs

NASA Astrophysics Data System (ADS)

Kobayashi, Y.; Yano, T.; Hatsutori, Y.; Gouda, N.; Murooka, J.; Niwa, Y.; Yamada, Y.

We simulated the data outputs of the first Japanese astrometry satellite Nano-JASMINE, which is scheduled to be launched by the Cyclone-4 rocket in August 2011. The simulations were carried out using existing stellar catalogues such as the Hipparcos catalogue, the Tycho catalogue, and the Guide Star catalogue version 2.3. Several statics are shown such as the number of stars those will be measured distances using annual aberration observations. The method for determining the initial direction of the satellite's spin axis has also been discussed. In this case, the frequency of bright stars observed by the satellite is an important factor.

VizieR Online Data Catalog: SKY2000 Master Catalog, Version 5 (Myers+ 2006)

NASA Astrophysics Data System (ADS)

Myers, J. R.; Sande, C. B.; Miller, A. C.; Warren, W. H., Jr.; Tracewell, D. A.

2015-02-01

The SKYMAP Star Catalog System consists of a Master Catalog stellar database and a collection of utility software designed to create and maintain the database and to generate derivative mission star catalogs (run catalogs). It contains an extensive compilation of information on almost 300000 stars brighter than 8.0mag. The original SKYMAP Master Catalog was generated in the early 1970's. Incremental updates and corrections were made over the following years but the first complete revision of the source data occurred with Version 4.0. This revision also produced a unique, consolidated source of astrometric information which can be used by the astronomical community. The derived quantities were removed and wideband and photometric data in the R (red) and I (infrared) systems were added. Version 4 of the SKY2000 Master Catalog was completed in April 2002; it marks the global replacement of the variability identifier and variability data fields. More details can be found in the description file sky2kv4.pdf. The SKY2000 Version 5 Revision 4 Master Catalog differs from Revision 3 in that MK and HD spectral types have been added from the Catalogue of Stellar Spectral Classifications (B. A. Skiff of Lowell Observatory, 2005), which has been assigned source code 50 in this process. 9622 entries now have MK types from this source, while 3976 entries have HD types from this source. SKY2000 V5 R4 also differs globally from preceding MC versions in that the Galactic coordinate computations performed by UPDATE have been increased in accuracy, so that differences from the same quantities from other sources are now typically in the last decimal places carried in the MC. This version supersedes the previous versions 1(V/95), 2(V/102), 3(V/105) and 4(V/109). (6 data files).

VizieR Online Data Catalog: Parenago Catalog of Stars in Orion Nebula (Parenago 1954)

NASA Astrophysics Data System (ADS)

Parenago, P. P.

1997-10-01

The present catalogue is a machine-readable version of the catalogue of stars in the area of the Orion nebula, published by P.P. Parenago (1954). The sky area between 5h 24m and 5h 36m in right ascension (1900.0) and between -4 and -7 degrees in declination (1900.0), containing the Orion nebula, has been investigated in that work. Ten of variable stars in original Parenago (1954) catalogue had CSV numbers (Kukarkin et al., 1951) but since that time all of them were confirmed as variables and included in GCVS (Kholopov et al., 1985a&b, 1987). We superseded CSV-numbers by GCVS-names in the machine-readable version for the following stars: ------------------------------------------------ Number in CSV-number GCVS-name the catalogue ------------------------------------------------ 1605 606 V372 ORI 1613 607 V373 ORI 1635 608 V374 ORI 1713 609 V375 ORI 1748 610 V387 ORI 1762 100569 V376 ORI 1974 617 V377 ORI 2183 625 V388 ORI 2393 630 V380 ORI 2478 634 V381 ORI ------------------------------------------------ (1 data file).

Submillimeter, millimeter, and microwave spectral line catalogue

NASA Technical Reports Server (NTRS)

Poynter, R. L.; Pickett, H. M.

1984-01-01

This report describes a computer accessible catalogue of submillimeter, millimeter, and microwave spectral lines in the frequency range between 0 and 10000 GHz (i.e., wavelengths longer than 30 micrometers). The catalogue can be used as a planning guide or as an aid in the identification and analysis of observed spectral lines. The information listed for each spectral line includes the frequency and its estimated error, the intensity, lower state energy, and quantum number assignment. The catalogue has been constructed using theoretical least squares fits of published spectral lines to accepted molecular models. The associated predictions and their estimated errors are based upon the resultant fitted parameters and their covariances. Future versions of this catalogue will add more atoms and molecules and update the present listings (151 species) as new data appear. The catalogue is available from the authors as a magnetic tape recorded in card images and as a set of microfiche records.

HerMES: point source catalogues from Herschel-SPIRE observations II

NASA Astrophysics Data System (ADS)

Wang, L.; Viero, M.; Clarke, C.; Bock, J.; Buat, V.; Conley, A.; Farrah, D.; Guo, K.; Heinis, S.; Magdis, G.; Marchetti, L.; Marsden, G.; Norberg, P.; Oliver, S. J.; Page, M. J.; Roehlly, Y.; Roseboom, I. G.; Schulz, B.; Smith, A. J.; Vaccari, M.; Zemcov, M.

2014-11-01

The Herschel Multi-tiered Extragalactic Survey (HerMES) is the largest Guaranteed Time Key Programme on the Herschel Space Observatory. With a wedding cake survey strategy, it consists of nested fields with varying depth and area totalling ˜380 deg2. In this paper, we present deep point source catalogues extracted from Herschel-Spectral and Photometric Imaging Receiver (SPIRE) observations of all HerMES fields, except for the later addition of the 270 deg2 HerMES Large-Mode Survey (HeLMS) field. These catalogues constitute the second Data Release (DR2) made in 2013 October. A sub-set of these catalogues, which consists of bright sources extracted from Herschel-SPIRE observations completed by 2010 May 1 (covering ˜74 deg2) were released earlier in the first extensive data release in 2012 March. Two different methods are used to generate the point source catalogues, the SUSSEXTRACTOR point source extractor used in two earlier data releases (EDR and EDR2) and a new source detection and photometry method. The latter combines an iterative source detection algorithm, STARFINDER, and a De-blended SPIRE Photometry algorithm. We use end-to-end Herschel-SPIRE simulations with realistic number counts and clustering properties to characterize basic properties of the point source catalogues, such as the completeness, reliability, photometric and positional accuracy. Over 500 000 catalogue entries in HerMES fields (except HeLMS) are released to the public through the HeDAM (Herschel Database in Marseille) website (http://hedam.lam.fr/HerMES).

[Investigation on the number of ancient medical books collected in Haiyuan Private Library].

PubMed

Man, Xue; Liu, Gengsheng

2015-03-01

Yang's Haiyuan Private Library in Liaocheng City, Shandong Province, is the only extant one among the four famous private libraries of the Qing dynasty in Northern China. Its collection is ample and graceful and especially rich in rare and secret versions, amounting to over 2 000 kinds, 200- thousand volumes. By sorting out 5 kinds of such collections from the Yang's family catalogue of Liaocheng in Shandong, plus 3 kinds of supplemented catalogue by Wang Shaozeng, the Catalogue of Haiyuan Private Library Collected in Shandong Provincial Library, and catalogues of modern scholars, it can be basically identified that the number of medical collections of Yang's Haiyuan Private Library is 87 kinds. Supposing all kinds contain 112 works, then Haiyuan Private Library totally has 1296 volumes according to the catalogues.

Compiling an earthquake catalogue for the Arabian Plate, Western Asia

NASA Astrophysics Data System (ADS)

Deif, Ahmed; Al-Shijbi, Yousuf; El-Hussain, Issa; Ezzelarab, Mohamed; Mohamed, Adel M. E.

2017-10-01

The Arabian Plate is surrounded by regions of relatively high seismicity. Accounting for this seismicity is of great importance for seismic hazard and risk assessments, seismic zoning, and land use. In this study, a homogenous earthquake catalogue of moment-magnitude (Mw) for the Arabian Plate is provided. The comprehensive and homogenous earthquake catalogue provided in the current study spatially involves the entire Arabian Peninsula and neighboring areas, covering all earthquake sources that can generate substantial hazard for the Arabian Plate mainland. The catalogue extends in time from 19 to 2015 with a total number of 13,156 events, of which 497 are historical events. Four polygons covering the entire Arabian Plate were delineated and different data sources including special studies, local, regional and international catalogues were used to prepare the earthquake catalogue. Moment magnitudes (Mw) that provided by original sources were given the highest magnitude type priority and introduced to the catalogues with their references. Earthquakes with magnitude differ from Mw were converted into this scale applying empirical relationships derived in the current or in previous studies. The four polygons catalogues were included in two comprehensive earthquake catalogues constituting the historical and instrumental periods. Duplicate events were identified and discarded from the current catalogue. The present earthquake catalogue was declustered in order to contain only independent events and investigated for the completeness with time of different magnitude spans.

Candidate high-z protoclusters among the Planck compact sources, as revealed by Herschel-SPIRE

NASA Astrophysics Data System (ADS)

Greenslade, J.; Clements, D. L.; Cheng, T.; De Zotti, G.; Scott, D.; Valiante, E.; Eales, S.; Bremer, M. N.; Dannerbauer, H.; Birkinshaw, M.; Farrah, D.; Harrison, D. L.; Michałowski, M. J.; Valtchanov, I.; Oteo, I.; Baes, M.; Cooray, A.; Negrello, M.; Wang, L.; van der Werf, P.; Dunne, L.; Dye, S.

2018-05-01

By determining the nature of all the Planck compact sources within 808.4 deg2 of large Herschel surveys, we have identified 27 candidate protoclusters of dusty star-forming galaxies (DSFGs) that are at least 3σ overdense in either 250, 350, or 500 μm sources. We find roughly half of all the Planck compact sources are resolved by Herschel into multiple discrete objects, with the other half remaining unresolved by Herschel. We find a significant difference between versions of the Planck catalogues, with earlier releases hosting a larger fraction of candidate protoclusters and Galactic cirrus than later releases, which we ascribe to a difference in the filters used in the creation of the three catalogues. We find a surface density of DSFG candidate protoclusters of (3.3 ± 0.7) × 10-2 sources deg-2, in good agreement with previous similar studies. We find that a Planck colour selection of S857/S545 < 2 works well to select candidate protoclusters, but can miss protoclusters at z < 2. The Herschel colours of individual candidate protocluster members indicate our candidate protoclusters all likely all lie at z > 1. Our candidate protoclusters are a factor of 5 times brighter at 353 GHz than expected from simulations, even in the most conservative estimates. Further observations are needed to confirm whether these candidate protoclusters are physical clusters, multiple protoclusters along the line of sight, or chance alignments of unassociated sources.

Documentation for the machine-readable version of the revised Catalogue of Stellar Rotational Velocities of Uesugi and Fukuda (1982)

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1983-01-01

The machine-readable catalog provides mean data on the old Slettebak system for 6472 stars. The catalog results from the review, analysis and transformation of 11460 data from 102 sources. Star identification, (major catalog number, name if the star has one, or cluster identification, etc.), a man projected rotational velocity, and a list of source references re included. The references are given in a second file included with the catalog when it is distributed on magnetic tape. The contents and/formats of the the data and reference files of the machine-readable catalog are described to enable users to read and process the data.

Nebula observations. Catalogues and archive of photoplates

NASA Astrophysics Data System (ADS)

Shlyapnikov, A. A.; Smirnova, M. A.; Elizarova, N. V.

2017-12-01

A process of data systematization based on "Academician G.A. Shajn's Plan" for studying the Galaxy structure related to nebula observations is considered. The creation of digital versions of catalogues of observations and publications is described, as well as their presentation in HTML, VOTable and AJS formats and basic principles of work in the interactive application of International Virtual Observatory the Aladin Sky Atlas.

A catalogue of AKARI FIS BSC extragalactic objects

NASA Astrophysics Data System (ADS)

Marton, Gabor; Toth, L. Viktor; Gyorgy Balazs, Lajos

2015-08-01

We combined photometric data of about 70 thousand point sources from the AKARI Far-Infrared Surveyor Bright Source Catalogue with AllWISE catalogue data to identify galaxies. We used Quadratic Discriminant Analysis (QDA) to classify our sources. The classification was based on a 6D parameter space that contained AKARI [F65/F90], [F90/F140], [F140/F160] and WISE W1-W2 colours along with WISE W1 magnitudes and AKARI [F140] flux values. Sources were classified into 3 main objects types: YSO candidates, evolved stars and galaxies. The training samples were SIMBAD entries of the input point sources wherever an associated SIMBAD object was found within a 30 arcsecond search radius. The QDA resulted more than 5000 AKARI galaxy candidate sources. The selection was tested cross-correlating our AKARI extragalactic catalogue with the Revised IRAS-FSC Redshift Catalogue (RIFSCz). A very good match was found. A further classification attempt was also made to differentiate between extragalactic subtypes using Support Vector Machines (SVMs). The results of the various methods showed that we can confidently separate cirrus dominated objects (type 1 of RIFSCz). Some of our “galaxy candidate” sources are associated with 2MASS extended objects, and listed in the NASA Extragalactic Database so far without clear proofs of their extragalactic nature. Examples will be presented in our poster. Finally other AKARI extragalactic catalogues will be also compared to our statistical selection.

Submillimeter, millimeter, and microwave spectral line catalogue

NASA Technical Reports Server (NTRS)

Poynter, R. L.; Pickett, H. M.

1981-01-01

A computer accessible catalogue of submillimeter, millimeter and microwave spectral lines in the frequency range between 0 and 3000 GHZ (i.e., wavelengths longer than 100 mu m) is presented which can be used a planning guide or as an aid in the identification and analysis of observed spectral lines. The information listed for each spectral line includes the frequency and its estimated error, the intensity, lower state energy, and quantum number assignment. The catalogue was constructed by using theoretical least squares fits of published spectral lines to accepted molecular models. The associated predictions and their estimated errors are based upon the resultant fitted parameters and their covariances. Future versions of this catalogue will add more atoms and molecules and update the present listings (133 species) as new data appear. The catalogue is available as a magnetic tape recorded in card images and as a set of microfiche records.

Incident Management Capability Metrics Version 0.1

DTIC Science & Technology

2007-04-01

guidance for proactively securing and hardening their infrastructure, for example6: • ISO 17799 ( ISO /IEC 17799:2005) [ ISO 2005a] • ISO 27001 ( ISO /IEC... 27001 :2005) [ ISO 2005b] • Control Objectives for Information and related Technology (COBIT) [ITGI 2006...security management systems – Requirements ( ISO /IEC 27001 :2005).http://www.iso.org/ iso /en/CatalogueDetailPage.CatalogueDetail?CSNUMBER=421 03 (2005

The SCUBA-2 Ambitious Sky Survey: a catalogue of beam-sized sources in the Galactic longitude range 120°-140°

NASA Astrophysics Data System (ADS)

Nettke, Will; Scott, Douglas; Gibb, Andy G.; Thompson, Mark; Chrysostomou, Antonio; Evans, A.; Hill, Tracey; Jenness, Tim; Joncas, Gilles; Moore, Toby; Serjeant, Stephen; Urquhart, James; Vaccari, Mattia; Weferling, Bernd; White, Glenn; Zhu, Ming

2017-06-01

The SCUBA-2 Ambitious Sky Survey (SASSy) is composed of shallow 850-μm imaging using the Submillimetre Common-User Bolometer Array 2 (SCUBA-2) on the James Clerk Maxwell Telescope. Here we describe the extraction of a catalogue of beam-sized sources from a roughly 120 deg2 region of the Galactic plane mapped uniformly (to an rms level of about 40 mJy), covering longitude 120° < l < 140° and latitude |b| < 2.9°. We used a matched-filtering approach to increase the signal-to-noise ratio (S/N) in these noisy maps and tested the efficiency of our extraction procedure through estimates of the false discovery rate, as well as by adding artificial sources to the real images. The primary catalogue contains a total of 189 sources at 850 μm, down to an S/N threshold of approximately 4.6. Additionally, we list 136 sources detected down to S/N = 4.3, but recognize that as we go lower in S/N, the reliability of the catalogue rapidly diminishes. We perform follow-up observations of some of our lower significance sources through small targeted SCUBA-2 images and list 265 sources detected in these maps down to S/N = 5. This illustrates the real power of SASSy: inspecting the shallow maps for regions of 850-μm emission and then using deeper targeted images to efficiently find fainter sources. We also perform a comparison of the SASSy sources with the Planck Catalogue of Compact Sources and the IRAS Point Source Catalogue, to determine which sources discovered in this field might be new, and hence potentially cold regions at an early stage of star formation.

A new catalogue of ultraluminous X-ray sources (and more!)

NASA Astrophysics Data System (ADS)

Roberts, T.; Earnshaw, H.; Walton, D.; Middleton, M.; Mateos, S.

2017-10-01

Many of the critical issues of ultraluminous X-ray source (ULX) science - for example the prevalence of IMBH and/or ULX pulsar candidates within the wider ULX population - can only be addressed by studying statistical samples of ULXs. Similarly, characterising the range of properties displayed by ULXs, and so understanding their accretion physics, requires large samples of objects. To this end, we introduce a new catalogue of 376 ultraluminous X-ray sources and 1092 less luminous point X-ray sources associated with nearby galaxies, derived from the 3XMM-DR4 catalogue. We highlight applications of this catalogue, for example the identification of new IMBH candidates from the most luminous ULXs; and examining the physics of objects at the Eddington threshold, where their luminosities of ˜ 10^{39} erg s^{-1} indicate their accretion rates are ˜ Eddington. We also show how the catalogue can be used to start to examine a wider range of lower luminosity (sub-ULX) point sources in star forming galaxies than previously accessible through spectral stacking, and argue why this is important for galaxy formation in the high redshift Universe.

VizieR Online Data Catalog: SDSS DR7 voids and superclusters (Nadathur+, 2014)

NASA Astrophysics Data System (ADS)

Nadathur, S.; Hotchkiss, S.

2016-02-01

This is a public catalogue of voids and superclusters identified in the SDSS DR7 main galaxy and luminous red galaxy samples. This version is dated 04.11.2013. We make the catalogues available for general use. If you use them for your own work, we ask that you cite the original paper, Nadathur & Hotchkiss (2014MNRAS.440.1248N). The top-level directory cat_v11.11.13 contains an example python script called postproc.py, and two folders called comovcoords and redshiftcoords containing two versions of the catalogue in different coordinate systems. The comoving coordinate system is pretty self-explanatory, for a description of the other one please refer to the paper. Each of these directories is further divided into six folders containing the Type1 and Type2 void catalogues and the supercluster catalogue for each of the galaxy samples analysed here, and a folder called tools, which contains data useful for users wishing to apply their own selection criteria. The basic information provided includes the location of the barycentre of each structure, its volume, effective radius, average density and minimum or maximum density, its core galaxy and seed zone, the total number of galaxies in the seed zone, the number of zones merged to form the structure, the total number of particles in the structure, and its density ratio. These are split between two files for each structure type and each sample, named xxxinfo.txt and xxxlist.txt, where xxx refers to the structure type. It is also possible to extract lists of member galaxies of each structure and their magnitudes. An example python script, postproc.py, demonstrates how to access this information and how to build alternative catalogues using user-defined selection criteria. (27 data files).

VizieR Online Data Catalog: RASS-6dFGS catalogue (Mahony+, 2010)

NASA Astrophysics Data System (ADS)

Mahony, E. K.; Croom, S. M.; Boyle, B. J.; Edge, A. C.; Mauch, T.; Sadler, E. M.

2014-09-01

Objects were selected such that the dominant source of X-ray emission originates from an AGN. The target list was selected from the southern sources (δ<=0°) of the RBSC, a total of 9578 sources. Sources were then checked for optical identifications via a visual inspection process using Digitized Sky Survey (DSS) images. The majority of the optical positions were taken from the United States Naval Observatory (USNO) data base, with the remainder taken from either the Automated Plate Measuring (APM) or DSS catalogues. Positions from these latter catalogues were used when the USNO appeared to give an incorrect position according to the DSS images. Optical magnitudes were taken from the USNO-A2.0 catalogue (Monet 1998, Cat. I/252). (2 data files).

VizieR Online Data Catalog: Second ROSAT all-sky survey (2RXS) source catalog (Boller+, 2016)

NASA Astrophysics Data System (ADS)

Boller, T.; Freyberg, M. J.; Truemper, J.; Haberl, F.; Voges, W.; Nandra, K.

2016-03-01

We have re-analysed the photon event files from the ROSAT all-sky survey. The main goal was to create a catalogue of point-like sources, which is referred to as the 2RXS source catalogue. We improved the reliability of detections by an advanced detection algorithm and a complete screening process. New data products were created to allow timing and spectral analysis. Photon event files with corrected astrometry and Moon rejection (RASS-3.1 processing) were made available in FITS format. The 2RXS catalogue will serve as the basic X-ray all-sky survey catalogue until eROSITA data become available. (2 data files).

An All-Sky Portable (ASP) Optical Catalogue

NASA Astrophysics Data System (ADS)

Flesch, Eric Wim

2017-06-01

This optical catalogue combines the all-sky USNO-B1.0/A1.0 and most-sky APM catalogues, plus overlays of SDSS optical data, into a single all-sky map presented in a sparse binary format that is easily downloaded at 9 Gb zipped. Total count is 1 163 237 190 sources and each has J2000 astrometry, red and blue magnitudes with PSFs and variability indicator, and flags for proper motion, epoch, and source survey and catalogue for each of the photometry and astrometry. The catalogue is available on http://quasars.org/asp.html, and additional data for this paper is available at http://dx.doi.org/10.4225/50/5807fbc12595f.

Documentation for the machine-readable version of the Uppsala general catalogue of galaxies

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1982-01-01

The machine-readable version of the catalog containing descriptions of galaxies, their surrounding areas, and position angles for flattened galaxies is described. In addition to the correction of several errors discovered in a previous computerized version, a few duplicate records were removed and the record structure was revised slightly to accommodate a large data value and to remove superfluous blanks.

The calibration of read-out-streak photometry in the XMM-Newton Optical Monitor and the construction of a bright-source catalogue

NASA Astrophysics Data System (ADS)

Page, M. J.; Chan, N.; Breeveld, A. A.; Talavera, A.; Yershov, V.; Kennedy, T.; Kuin, N. P. M.; Hancock, B.; Smith, P. J.; Carter, M.

2017-04-01

The dynamic range of the XMM-Newton Optical Monitor (XMM-OM) is limited at the bright end by coincidence loss, the superposition of multiple photons in the individual frames recorded from its micro-channel-plate (MCP) intensified charge-coupled device (CCD) detector. One way to overcome this limitation is to use photons that arrive during the frame transfer of the CCD, forming vertical read-out streaks for bright sources. We calibrate these read-out streaks for photometry of bright sources observed with XMM-OM. The bright-source limit for read-out-streak photometry is set by the recharge time of the MCPs. For XMM-OM, we find that the MCP recharge time is 5.5 × 10-4 s. We determine that the effective bright limits for read-out-streak photometry with XMM-OM are approximately 1.5 mag brighter than the bright-source limits for normal aperture photometry in full-frame images. This translates into bright-source limits in Vega magnitudes of UVW2=7.1, UVM2=8.0, UVW1=9.4, U=10.5, B=11.5, V=10.2, and White=12.5 for data taken early in the mission. The limits brighten by up to 0.2 mag, depending on filter, over the course of the mission as the detector ages. The method is demonstrated by deriving UVW1 photometry for the symbiotic nova RR Telescopii, and the new photometry is used to constrain the e-folding time of its decaying ultraviolet (UV) emission. Using the read-out-streak method, we obtain photometry for 50 per cent of the missing UV source measurements in version 2.1 of the XMM-Newton Serendipitous UV Source Survey catalogue.

Multiband Study of Radio Sources of the Rcr Catalogue with Virtual Observatory Tools

NASA Astrophysics Data System (ADS)

Zhelenkova, O. P.; Soboleva, N. S.; Majorova, E. K.; Temirova, A. V.

We present early results of our multiband study of the RATAN Cold Revised (RCR) catalogue obtained from seven cycles of the ``Cold'' survey carried with the RATAN-600 radio telescope at 7.6 cm in 1980--1999, at the declination of the SS 433 source. We used the 2MASS and LAS UKIDSS infrared surveys, the DSS-II and SDSS DR7 optical surveys, as well as the USNO-B1 and GSC-II catalogues, the VLSS, TXS, NVSS, FIRST and GB6 radio surveys to accumulate information about the sources. For radio sources that have no detectable optical candidate in optical or infrared catalogues, we additionally looked through images in several bands from the SDSS, LAS UKIDSS, DPOSS, 2MASS surveys and also used co-added frames in different bands. We reliably identified 76% of radio sources of the RCR catalogue. We used the ALADIN and SAOImage DS9 scripting capabilities, interoperability services of ALADIN and TOPCAT, and also other Virtual Observatory (VO) tools and resources, such as CASJobs, NED, Vizier, and WSA, for effective data access, visualization and analysis. Without VO tools it would have been problematic to perform our study.

The JCMT Plane Survey: first complete data release - emission maps and compact source catalogue

NASA Astrophysics Data System (ADS)

Eden, D. J.; Moore, T. J. T.; Plume, R.; Urquhart, J. S.; Thompson, M. A.; Parsons, H.; Dempsey, J. T.; Rigby, A. J.; Morgan, L. K.; Thomas, H. S.; Berry, D.; Buckle, J.; Brunt, C. M.; Butner, H. M.; Carretero, D.; Chrysostomou, A.; Currie, M. J.; deVilliers, H. M.; Fich, M.; Gibb, A. G.; Hoare, M. G.; Jenness, T.; Manser, G.; Mottram, J. C.; Natario, C.; Olguin, F.; Peretto, N.; Pestalozzi, M.; Polychroni, D.; Redman, R. O.; Salji, C.; Summers, L. J.; Tahani, K.; Traficante, A.; diFrancesco, J.; Evans, A.; Fuller, G. A.; Johnstone, D.; Joncas, G.; Longmore, S. N.; Martin, P. G.; Richer, J. S.; Weferling, B.; White, G. J.; Zhu, M.

2017-08-01

We present the first data release of the James Clerk Maxwell Telescope Plane Survey (JPS), the JPS Public Release 1. JPS is an 850-μm continuum survey of six fields in the northern inner Galactic plane in a longitude range of ℓ = 7°-63°, made with the Submillimetre Common-User Bolometer Array 2. This first data release consists of emission maps of the six JPS regions with an average pixel-to-pixel noise of 7.19 mJy beam-1, when smoothed over the beam, and a compact source catalogue containing 7813 sources. The 95 per cent completeness limits of the catalogue are estimated at 0.04 Jy beam-1 and 0.3 Jy for the peak and integrated flux densities, respectively. The emission contained in the compact source catalogue is 42 ± 5 per cent of the total and, apart from the large-scale (greater than 8 arcmin) emission, there is excellent correspondence with features in the 500-μm Herschel maps. We find that, with two-dimensional matching, 98 ± 2 per cent of sources within the fields centred at ℓ = 20°, 30°, 40° and 50° are associated with molecular clouds, with 91 ± 3 per cent of the ℓ = 30° and 40° sources associated with dense molecular clumps. Matching the JPS catalogue to Herschel 70-μm sources, we find that 38 ± 1 per cent of sources show evidence of ongoing star formation. The JPS Public Release 1 images and catalogue will be a valuable resource for studies of star formation in the Galaxy and the role of environment and spiral arms in the star formation process.

Employing online quantum random number generators for generating truly random quantum states in Mathematica

NASA Astrophysics Data System (ADS)

Miszczak, Jarosław Adam

2013-01-01

The presented package for the Mathematica computing system allows the harnessing of quantum random number generators (QRNG) for investigating the statistical properties of quantum states. The described package implements a number of functions for generating random states. The new version of the package adds the ability to use the on-line quantum random number generator service and implements new functions for retrieving lists of random numbers. Thanks to the introduced improvements, the new version provides faster access to high-quality sources of random numbers and can be used in simulations requiring large amount of random data. New version program summaryProgram title: TRQS Catalogue identifier: AEKA_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKA_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 18 134 No. of bytes in distributed program, including test data, etc.: 2 520 49 Distribution format: tar.gz Programming language: Mathematica, C. Computer: Any supporting Mathematica in version 7 or higher. Operating system: Any platform supporting Mathematica; tested with GNU/Linux (32 and 64 bit). RAM: Case-dependent Supplementary material: Fig. 1 mentioned below can be downloaded. Classification: 4.15. External routines: Quantis software library (http://www.idquantique.com/support/quantis-trng.html) Catalogue identifier of previous version: AEKA_v1_0 Journal reference of previous version: Comput. Phys. Comm. 183(2012)118 Does the new version supersede the previous version?: Yes Nature of problem: Generation of random density matrices and utilization of high-quality random numbers for the purpose of computer simulation. Solution method: Use of a physical quantum random number generator and an on-line service providing access to the source of true random numbers generated by quantum real number generator. Reasons for new version: Added support for the high-speed on-line quantum random number generator and improved methods for retrieving lists of random numbers. Summary of revisions: The presented version provides two signicant improvements. The first one is the ability to use the on-line Quantum Random Number Generation service developed by PicoQuant GmbH and the Nano-Optics groups at the Department of Physics of Humboldt University. The on-line service supported in the version 2.0 of the TRQS package provides faster access to true randomness sources constructed using the laws of quantum physics. The service is freely available at https://qrng.physik.hu-berlin.de/. The use of this service allows using the presented package with the need of a physical quantum random number generator. The second improvement introduced in this version is the ability to retrieve arrays of random data directly for the used source. This increases the speed of the random number generation, especially in the case of an on-line service, where it reduces the time necessary to establish the connection. Thanks to the speed improvement of the presented version, the package can now be used in simulations requiring larger amounts of random data. Moreover, the functions for generating random numbers provided by the current version of the package more closely follow the pattern of functions for generating pseudo- random numbers provided in Mathematica. Additional comments: Speed comparison: The implementation of the support for the QRNG on-line service provides a noticeable improvement in the speed of random number generation. For the samples of real numbers of size 101; 102,…,107 the times required to generate these samples using Quantis USB device and QRNG service are compared in Fig. 1. The presented results show that the use of the on-line service provides faster access to random numbers. One should note, however, that the speed gain can increase or decrease depending on the connection speed between the computer and the server providing random numbers. Running time: Depends on the used source of randomness and the amount of random data used in the experiment. References: [1] M. Wahl, M. Leifgen, M. Berlin, T. Röhlicke, H.-J. Rahn, O. Benson., An ultrafast quantum random number generator with provably bounded output bias based on photon arrival time measurements, Applied Physics Letters, Vol. 098, 171105 (2011). http://dx.doi.org/10.1063/1.3578456.

Halo substructure in the SDSS-Gaia catalogue: streams and clumps

NASA Astrophysics Data System (ADS)

Myeong, G. C.; Evans, N. W.; Belokurov, V.; Amorisco, N. C.; Koposov, S. E.

2018-04-01

We use the Sloan Digital Sky Survey (SDSS)-Gaia Catalogue to identify six new pieces of halo substructure. SDSS-Gaia is an astrometric catalogue that exploits SDSS data release 9 to provide first epoch photometry for objects in the Gaia source catalogue. We use a version of the catalogue containing 245 316 stars with all phase-space coordinates within a heliocentric distance of ˜10 kpc. We devise a method to assess the significance of halo substructures based on their clustering in velocity space. The two most substantial structures are multiple wraps of a stream which has undergone considerable phase mixing (S1, with 94 members) and a kinematically cold stream (S2, with 61 members). The member stars of S1 have a median position of (X, Y, Z) = (8.12, -0.22, 2.75) kpc and a median metallicity of [Fe/H] = -1.78. The stars of S2 have median coordinates (X, Y, Z) = (8.66, 0.30, 0.77) kpc and a median metallicity of [Fe/H] = -1.91. They lie in velocity space close to some of the stars in the stream reported by Helmi et al. By modelling, we estimate that both structures had progenitors with virial masses ≈1010M⊙ and infall times ≳ 9 Gyr ago. Using abundance matching, these correspond to stellar masses between 106 and 107M⊙. These are somewhat larger than the masses inferred through the mass-metallicity relation by factors of 5 to 15. Additionally, we identify two further substructures (S3 and S4 with 55 and 40 members) and two clusters or moving group (C1 and C2 with 24 and 12) members. In all six cases, clustering in kinematics is found to correspond to clustering in both configuration space and metallicity, adding credence to the reliability of our detections.

Documentation for the machine-readable version of the third Santiago-Pulkovo Fundamental Stars Catalogue (SPF-3)

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1982-01-01

The machine-readable version of a catalog of right ascensions of 671 bright stars is described. The observations were made in a series consisting of 70 stars observed along the meridian from +42 deg to the pole in upper culmination and from the pole to -70 deg in lower culmination.

VizieR Online Data Catalog: Catalogue of Galactic Planetary Nebulae (Kohoutek, 2001)

NASA Astrophysics Data System (ADS)

Kohoutek, L.

2001-05-01

The "Catalogue of Galactic Planetary Nebulae (Version 2000)" appears in Abhandlungen aus der Hamburger Sternwarte, Band XII in the year 2001. It is a continuation of CGPN(1967) and contains 1510 objects classified as galactic PNe up to the end of 1999. The lists of possible pre-PNe and possible post-PNe are also given. The catalogue is restricted only to the data belonging to the location and identification of the objects. It gives identification charts of PNe discovered since 1965 (published in the supplements to CGPN) and those charts of objects discovered earlier, which have wrong or uncertain identification. The question "what is a planetary nebula" is discussed and the typical values of PNe and of their central stars are summarized. Short statistics about the discoveries of PNe are given. The catalogue is also available in the Centre de Donnees, Strasbourg and at Hamburg Observatory via internet. (15 data files).

Identification of stars in a J1744.0 star catalogue Yixiangkaocheng

NASA Astrophysics Data System (ADS)

Ahn, S.-H.

2012-05-01

The stars in the Chinese star catalogue, Yixiangkaocheng, which were edited by the Jesuit astronomer Kögler in AD 1744 and published in AD 1756, are identified with their counterparts in the Hipparcos catalogue. The equinox of the catalogue is confirmed to be J1744.0. By considering the precession of equinox, proper motions and nutation, the star closest to the location of each star in Yixiangkaocheng, having a proper magnitude, is selected as the corresponding identified star. I identified 2848 stars and 13 nebulosities out of 3083 objects in Yixiangkaocheng, and so the identification rate reached 92.80 per cent. I find that the magnitude classification system in Yixiangkaocheng agrees with the modern magnitude system. The catalogue includes dim stars, whose visual magnitudes are larger than 7, but most of these stars have Flamsteed designations. I find that the stars whose declination is lower than -30° have relatively larger offsets and different systematic behaviour from other stars. This indicates that there might be two different sources of stars in Yixiangkaocheng. In particular, I find that μ1 Sco and γ1 Sgr approximately mark the boundary between two different source catalogues. The observer's location, as estimated from these facts, agrees with the latitude of Greenwich where Flamsteed made his observations. The positional offsets between the Yixiangkaocheng stars and the Hipparcos stars are 0.6 arcmin, which implies that the source catalogue of stars with δ > -30° must have come from telescopic observations. Nebulosities in Yixiangkaocheng are identified with a few double stars, o Cet (the variable star, Mira), the Andromeda galaxy, ω Cen and NGC6231. These entities are associated with listings in Halley's Catalogue of the Southern Stars of AD 1679 as well as Flamsteed's catalogue of AD 1690.

IAU MDC Photographic Meteor Orbits Database: Version 2013

NASA Astrophysics Data System (ADS)

Neslušan, L.; Porubčan, V.; Svoreň, J.

2014-05-01

A new 2013 version of the IAU MDC photographic meteor orbits database which is an upgrade of the current 2003 version (Lindblad et al. 2003, EMP 93:249-260) is presented. To the 2003 version additional 292 orbits are added, thus the new version of the database consists of 4,873 meteors with their geophysical and orbital parameters compiled in 41 catalogues. For storing the data, a new format enabling a more simple treatment with the parameters, including the errors of their determination is applied. The data can be downloaded from the IAU MDC web site: http://www.astro.sk/IAUMDC/Ph2013/

Documentation for the machine-readable version of the Henry Draper Catalogue (edition 1985)

NASA Technical Reports Server (NTRS)

Roman, N. G.; Warren, W. H., Jr.

1985-01-01

An updated, corrected and extended machine-readable version of the catalog is described. Published and unpublished errors discovered in the previous version was corrected; letters indicating supplemental stars in the BD have been moved to a new byte to distinguish them from double-star components; and the machine readable portion of The Henry Draper Extension (HDE) (HA 100) was converted to the same format as the main catalog, with additional data added as necessary.

Documentation for the machine-readable version of the Perth 75: A Catalogue of Positions of 2589 FK4 and FK4S Stars (Nikoloff and Hog 1982)

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1984-01-01

Detailed descriptions of the data and format of the machine-readable astronomical catalog are given. The machine version is identical in data content to the published edition, but minor modifications in the data format were made in order to effect uniformity with machine versions of other astronomical catalogs. Stellar motions and positions at epoch and equinox 1950.0 are reported.

Northern Hemisphere observations of ICRF sources on the USNO stellar catalogue frame

NASA Astrophysics Data System (ADS)

Fienga, A.; Andrei, A. H.

2004-06-01

The most recent USNO stellar catalogue, the USNO B1.0 (Monet et al. \\cite{Monet03}), provides positions for 1 042 618 261 objects, with a published astrometric accuracy of 200 mas and five-band magnitudes with a 0.3 mag accuracy. Its completeness is believed to be up to magnitude 21th in V-band. Such a catalogue would be a very good tool for astrometric reduction. This work investigates the accuracy of the USNO B1.0 link to ICRF and give an estimation of its internal and external accuracies by comparison with different catalogues, and by computation of ICRF sources using USNO B1.0 star positions.

Derivation of photometric redshifts for the 3XMM catalogue

NASA Astrophysics Data System (ADS)

Georgantopoulos, I.; Corral, A.; Mountrichas, G.; Ruiz, A.; Masoura, V.; Fotopoulou, S.; Watson, M.

2017-10-01

We present the results from our ESA Prodex project that aims to derive photometric redshifts for the 3XMM catalogue. The 3XMM DR-6 offers the largest X-ray survey, containing 470,000 unique sources over 1000 sq. degrees. We cross-correlate the X-ray positions with optical and near-IR catalogues using Bayesian statistics. The optical catalogue used so far is the SDSS while currently we are employing the recently released PANSTARRS catalogue. In the near IR we use the Viking, VHS, UKIDS surveys and also the WISE W1 and W2 filters. The estimation of photometric redshifts is based on the TPZ software. The training sample is based on X-ray selected samples with available SDSS spectroscopy. We present here the results for the 40,000 3XMM sources with available SDSS counterparts. Our analysis provides very reliable photometric redshifts with sigma(mad)=0.05 and a fraction of outliers of 8% for the optically extended sources. We discuss the wide range of applications that are feasible using this unprecedented resource.

The Planck Catalogue of Galactic Cold Clumps : PGCC

NASA Astrophysics Data System (ADS)

Montier, L.

The Planck satellite has provided an unprecedented view of the submm sky, allowing us to search for the dust emission of Galactic cold sources. Combining Planck-HFI all-sky maps in the high frequency channels with the IRAS map at 100um, we built the Planck catalogue of Galactic Cold Clumps (PGCC, Planck 2015 results. XXVIII), counting 13188 sources distributed over the whole sky, and following mainly the Galactic structures at low and intermediate latitudes. This is the first all-sky catalogue of Galactic cold sources obtained with a single instrument at this resolution and sensitivity, which opens a new window on star-formation processes in our Galaxy.

A new UKIDSS proper motion survey and key early results, including new benchmark systems

NASA Astrophysics Data System (ADS)

Smith, L.; Lucas, P.; Burningham, B.; Jones, H.; Pinfield, D.; Smart, R.; Andrei, A.

We present a proper motion catalogue for the 1500 deg2 of 2 epoch J-band UKIDSS Large Area Survey (LAS) data, which includes 120,000 stellar sources with motions detected above the 5sigma level. Our upper limit on proper motion detection is 3\\farcs3 yr-1 and typical uncertainties are of order 10 mas yr-1 for bright sources from data with a modest 1.8-7.0 year epoch baseline. We developed a bespoke proper motion pipeline which applies a source-unique second order polynomial transformation to UKIDSS array coordinates to counter potential local non-uniformity in the focal plane. Our catalogue agrees well with the proper motion data supplied in the current WFCAM Science Archive (WSA) tenth data release (DR10) catalogue where there is overlap, and in various optical catalogues, but it benefits from some improvements, such as a larger matching radius and relative to absolute proper motion correction. We present proper motion results for 128 T dwarfs in the UKIDSS LAS and key early results of projects utilising our catalogue, in particular searches for brown dwarf benchmark systems through cross matches with existing proper motion catalogues. We report the discovery of two new T dwarf benchmark systems.

X-ray selected stars in HRC and BHRC catalogues

NASA Astrophysics Data System (ADS)

Mickaelian, A. M.; Paronyan, G. M.

2014-12-01

A joint HRC/BHRC Catalogue has been created based on merging of Hamburg ROSAT Catalogue (HRC) and Byurakan Hamburg ROSAT Catalogue (BHRC). Both have been made by optical identifications of X-ray sources based on low-dispersion spectra of the Hamburg Quasar Survey (HQS) using ROSAT Catalogues. As a result, the largest sample of 8132 (5341+2791) optically identified X-ray sources was created having count rate (CR) of photons ≤ 0.04 ct/s in the area with galactic latitudes |b|≤ 20° and declinations d≤ 0°.There are 4253 AGN, 492 galaxies, 1800 stars and 1587 unknown objects in the sample. All stars have been found in GSC 2.3.2, as well as most of them are in GALEX, USNO-B1.0, 2MASS and WISE catalogues. In addition, 1429 are in SDSS DR9 and 204 have SDSS spectra. For these stars we have carried out spectral classification and along with the bright stars, many new cataclysmic variables (CV), white dwarfs (WD) and late-type stars (K-M and C) have been revealed. For all stars, statistical studies of their multiwavelength properties have been made. An attempt to find a connection between the radiation fluxes in different bands for different types of sources, and identify their characteristics was made as well.

VizieR Online Data Catalog: The Super-CLASS GMRT catalogue - SCG (Riseley+, 2016)

NASA Astrophysics Data System (ADS)

Riseley, C. J.; Scaife, A. M. M.; Hales, C. A.; Harrison, I.; Birkinshaw, M.; Battye, R. A.; Beswick, R. J.; Brown, M. L.; Casey, C. M.; Chapman, S. C.; Demetroullas, C.; Hung, C.-L.; Jackson, N. J.; Muxlow, T.; Watson, B.

2016-06-01

The Super-CLASS GMRT (SCG) catalogue is the low-frequency counterpart of the Super-Cluster Assisted Shear Survey. It is a survey at 13-arcsec resolution, with a limiting 5σ flux density of 170uJy. The catalogue comprises 3257 sources. (1 data file).

FORM version 4.0

NASA Astrophysics Data System (ADS)

Kuipers, J.; Ueda, T.; Vermaseren, J. A. M.; Vollinga, J.

2013-05-01

We present version 4.0 of the symbolic manipulation system FORM. The most important new features are manipulation of rational polynomials and the factorization of expressions. Many other new functions and commands are also added; some of them are very general, while others are designed for building specific high level packages, such as one for Gröbner bases. New is also the checkpoint facility, that allows for periodic backups during long calculations. Finally, FORM 4.0 has become available as open source under the GNU General Public License version 3. Program summaryProgram title: FORM. Catalogue identifier: AEOT_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEOT_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 151599 No. of bytes in distributed program, including test data, etc.: 1 078 748 Distribution format: tar.gz Programming language: The FORM language. FORM itself is programmed in a mixture of C and C++. Computer: All. Operating system: UNIX, LINUX, Mac OS, Windows. Classification: 5. Nature of problem: FORM defines a symbolic manipulation language in which the emphasis lies on fast processing of very large formulas. It has been used successfully for many calculations in Quantum Field Theory and mathematics. In speed and size of formulas that can be handled it outperforms other systems typically by an order of magnitude. Special in this version: The version 4.0 contains many new features. Most important are factorization and rational arithmetic. The program has also become open source under the GPL. The code in CPC is for reference. You are encouraged to upload the most recent sources from www.nikhef.nl/form/formcvs.php because of frequent bug fixes. Solution method: See "Nature of Problem", above. Additional comments: NOTE: The code in CPC is for reference. You are encouraged to upload the most recent sources from www.nikhef.nl/form/formcvs.php because of frequent bug fixes.

Dr TIM: Ray-tracer TIM, with additional specialist scientific capabilities

NASA Astrophysics Data System (ADS)

Oxburgh, Stephen; Tyc, Tomáš; Courtial, Johannes

2014-03-01

We describe several extensions to TIM, a raytracing program for ray-optics research. These include relativistic raytracing; simulation of the external appearance of Eaton lenses, Luneburg lenses and generalised focusing gradient-index lens (GGRIN) lenses, which are types of perfect imaging devices; raytracing through interfaces between spaces with different optical metrics; and refraction with generalised confocal lenslet arrays, which are particularly versatile METATOYs. Catalogue identifier: AEKY_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKY_v2_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licencing provisions: GNU General Public License No. of lines in distributed program, including test data, etc.: 106905 No. of bytes in distributed program, including test data, etc.: 6327715 Distribution format: tar.gz Programming language: Java. Computer: Any computer capable of running the Java Virtual Machine (JVM) 1.6. Operating system: Any, developed under Mac OS X Version 10.6 and 10.8.3. RAM: Typically 130 MB (interactive version running under Mac OS X Version 10.8.3) Classification: 14, 18. Catalogue identifier of previous version: AEKY_v1_0 Journal reference of previous version: Comput. Phys. Comm. 183(2012)711 External routines: JAMA [1] (source code included) Does the new version supersede the previous version?: Yes Nature of problem: Visualisation of scenes that include scene objects that create wave-optically forbidden light-ray fields. Solution method: Ray tracing. Reasons for new version: Significant extension of the capabilities (see Summary of revisions), as demanded by our research. Summary of revisions: Added capabilities include the simulation of different types of camera moving at relativistic speeds relative to the scene; visualisation of the external appearance of generalised focusing gradient-index (GGRIN) lenses, including Maxwell fisheye, Eaton and Luneburg lenses; calculation of refraction at the interface between spaces with different optical metrics; and handling of generalised confocal lenslet arrays (gCLAs), a new type of METATOY. Unusual features: Specifically designed to visualise wave-optically forbidden light-ray fields; can visualise ray trajectories and geometric optic transformations; can simulate photos taken with different types of camera moving at relativistic speeds, interfaces between spaces with different optical metrics, the view through METATOYs and generalised focusing gradient-index lenses; can create anaglyphs (for viewing with coloured “3D glasses”), HDMI-1.4a standard 3D images, and random-dot autostereograms of the scene; integrable into web pages. Running time: Problem-dependent; typically seconds for a simple scene. References: [1] JAMA: A Java Matrix Package, http://math.nist.gov/javanumerics/jama/

Documentation for the machine readable version of the Yale Catalogue of the Positions and Proper Motions of Stars between Declinations -60 deg and -70 deg (Fallon 1983)

NASA Technical Reports Server (NTRS)

Roman, N. G.; Warren, W. H., Jr.

1984-01-01

The machine-readable, character-coded version of the catalog, as it is currently being distributed from the Astronomical Data Center(ADC), is described. The format and data provided in the magnetic tape version differ somewhat from those of the published catalog, which was also produced from a tape prepared at the ADC. The primary catalog data are positions and proper motions (equinox 1950.0) for 14597 stars.

Catalogue of UV sources in the Galaxy

NASA Astrophysics Data System (ADS)

Beitia-Antero, L.; Gómez de Castro, A. I.

2017-03-01

The Galaxy Evolution Explorer (GALEX) ultraviolet (UV) database contains the largest photometric catalogue in the ultraviolet range; as a result GALEX photometric bands, Near UV band (NUV) and the Far UV band (FUV), have become standards. Nevertheless, the GALEX catalogue does not include bright UV sources due to the high sensitivity of its detectors, neither sources in the Galactic plane. In order to extend the GALEX database for future UV missions, we have obtained synthetic FUV and NUV photometry using the database of UV spectra generated by the International Ultraviolet Explorer (IUE). This database contains 63,755 spectra in the low dispersion mode (λ / δ λ ˜ 300) obtained during its 18-year lifetime. For stellar sources in the IUE database, we have selected spectra with high Signal-To-NoiseRatio (SNR) and computed FUV and NUV magnitudes using the GALEX transmission curves along with the conversion equations between flux and magnitudes provided by the mission. Besides, we have performed variability tests to determine whether the sources were variable (during the IUE observations). As a result, we have generated two different catalogues: one for non-variable stars and another one for variable sources. The former contains FUV and NUV magnitudes, while the latter gives the basic information and the FUV magnitude for each observation. The consistency of the magnitudes has been tested using White Dwarfs contained in both GALEX and IUE samples. The catalogues are available through the Centre des Donées Stellaires. The sources are distributed throughout the whole sky, with a special coverage of the Galactic plane.

VizieR Online Data Catalog: Planck Catalogue of Galactic cold clumps (PGCC) (Planck+, 2016)

NASA Astrophysics Data System (ADS)

Planck Collaboration; Ade, P. A. R.; Aghanim, N.; Arnaud, M.; Ashdown, M.; Aumont, J.; Baccigalupi, C.; Banday, A. J.; Barreiro, R. B.; Bartolo, N.; Battaner, E.; Benabed, K.; Benoit, A.; Benoit-Levy, A.; Bernard, J.-P.; Bersanelli, M.; Bielewicz, P.; Bonaldi, A.; Bonavera, L.; Bond, J. R.; Borrill, J.; Bouchet, F. R.; Boulanger, F.; Bucher, M.; Burigana, C.; Butler, R. C.; Calabrese, E.; Catalano, A.; Chamballu, A.; Chiang, H. C.; Christensen, P. R.; Clements, D. L.; Colombi, S.; Colombo, L. P. L.; Combet, C.; Couchot, F.; Coulais, A.; Crill, B. P.; Curto, A.; Cuttaia, F.; Danese, L.; Davies, R. D.; Davis, R. J.; de Bernardis, P.; De Rosa, A.; de Zotti, G.; Delabrouille, J.; Desert, F.-X.; Dickinson, C.; Diego, J. M.; Dole, H.; Donzelli, S.; Dore, O.; Douspis, M.; Ducout, A.; Dupac, X.; Efstathiou, G.; Elsner, F.; Ensslin, T. A.; Eriksen, H. K.; Falgarone, E.; Fergusson, J.; Fergusson, J.; Finelli, F.; Forni, O.; Frailis, M.; Fraisse, A. A.; Franceschi, E.; Frejsel, A.; Galeotta, S.; Galli, S.; Ganga, K.; Giard, M.; Giraud-Heraud, Y.; Gjerlow, E.; Gonzalez-Nuevo, J.; Gorsk, I. K. M.; Gratton, S.; Gregorio, A.; Gruppuso, A.; Gudmundsson, J. E.; Hansen, F. K.; Hanson, D.; Harrison, D. L.; Helou, G.; Henrot-Versille, S.; Hernandez-Monteagudo, C.; Herranz, D.; Hildebrandt, S. R.; Hivon, E.; Hobson, M.; Holmes, W. A.; Hornstrup, A.; Hovest, W.; Huffenberger, K. M.; Hurier, G.; Jaffe, A. H.; Jaffe, T. R.; Jones, W. C.; Juvela, M.; Keihanen, E.; Keskitalo, R.; Kisner, T. S.; Knoche, J.; Kunz, M.; Kurki-Suonio, H.; Lagache, G.; Lamarre, J.-M.; Lasenby, A.; Lattanzi, M.; Lawrence, C. R.; Leonardi, R.; Lesgourgues, J.; Levrier, F.; Liguori, M.; Lilje, P. B.; Linden-Vornle, M.; Lopez-Caniego, M.; Lubin, P. M.; Macias-Perez, J. F.; Maggio, G.; Maino, D.; Mandolesi, N.; Mangilli, A.; Marshall, D. J.; Martin, P. G.; Martinez-Gonzalez, E.; Masi, S.; Matarrese, S.; Mazzotta, P.; McGehee, P.; Melchiorri, A.; Mendes, L.; Mennella, A.; Migliaccio, M.; Mitra, S.; Miville-Deschenes, M.-A.; Moneti, A.; Montier, L.; Morgante, G.; Mortlock, D.; Moss, A.; Munshi, D.; Murphy, J. A.; Naselsky, P.; Nati, F.; Natoli, P.; Netterfield, C. B.; Norgaard-Nielsen, H. U.; Noviello, F.; Novikov, D.; Novikov, I.; Oxborrow, C. A.; Paci, F.; Pagano, L.; Pajot, F.; Paladini, R.; Paoletti, D.; Pasian, F.; Patanchon, G.; Pearson, T. J.; Pelkonen, V.-M.; Perdereau, O.; Perotto, L.; Perrotta, F.; Pettorino, V.; Piacentini, F.; Piat, M.; Pierpaoli, E.; Pietrobon, D.; Plaszczynski, S.; Pointecouteau, E.; Polenta, G.; Pratt, G. W.; Prezeau, G.; Prunet, S.; Puget, J.-L.; Rachen, J. P.; Reach, W. T.; Rebolo, R.; Reinecke, M.; Remazeilles, M.; Renault, C.; Renzi, A.; Ristorcelli, I.; Rocha, G.; Rosset, C.; Rossetti, M.; Roudier, G.; Rubino-Martin, J. A.; Rusholme, B.; Sandri, M.; Santos, D.; Savelainen, M.; Savini, G.; Scott, D.; Seiffert, M. D.; Shellard, E. P. S.; Spencer, L. D.; Stolyarov, V.; Sudiwala, R.; Sunyaev, R.; Sutton, D.; Suur-Uski, A.-S.; Sygnet, J.-F.; Tauber, J. A.; Terenzi, L.; Toffolatti, L.; Tomasi, M.; Tristram, M.; Tucci, M.; Tuovinen, J.; Umana, G.; Valenziano, L.; Valiviita, J.; van Tent, B.; Vielva, P.; Villa, F.; Wade, L. A.; Wandelt, B. D.; Wehus, I. K.; Yvon, D.; Zacchei, A.; Zonca, A.

2017-01-01

The Planck Catalogue of Galactic Cold Clumps (PGCC) is a list of 13188 Galactic sources and 54 sources located in the Small and Large Magellanic Clouds. The sources have been identified in Planck data as sources colder than their environment. It has been built using the 48 months Planck data at 857, 545, and 353GHz combined with the 3THz IRAS data. (1 data file).

The great contribution: Index Medicus, Index-Catalogue, and IndexCat

PubMed Central

Greenberg, Stephen J.; Gallagher, Patricia E.

2009-01-01

Objective: The systematic indexing of medical literature by the Library of the Surgeon-General's Office (now the National Library of Medicine) has been called “America's greatest contribution to medical knowledge.” In the 1870s, the library launched two indexes: the Index Medicus and the Index-Catalogue of the Library of the Surgeon-General's Office. Index Medicus is better remembered today as the forerunner of MEDLINE, but Index Medicus began as the junior partner of what the library saw as its major publication, the Index-Catalogue. However, the Index-Catalogue had been largely overlooked by many medical librarians until 2004, when the National Library of Medicine released IndexCat, the online version of Index-Catalogue. Access to this huge amount of material raised new questions: What was the coverage of the Index-Catalogue? How did it compare and overlap with the Index Medicus? Method: Over 1,000 randomly generated Index Medicus citations were cross-referenced in IndexCat. Results: Inclusion, form, content, authority control, and subject headings were evaluated, revealing that the relationship between the two publications was neither simple nor static through time. In addition, the authors found interesting anomalies that shed light on how medical literature was selected and indexed in “America's greatest contribution to medical knowledge.” PMID:19404501

AKARI Infrared Camera Survey of the Large Magellanic Cloud

NASA Astrophysics Data System (ADS)

Shimonishi, Takashi; Kato, Daisuke; Ita, Yoshifusa; Onaka, Takashi

2015-08-01

The Large Magellanic Cloud (LMC) is one of the closest external galaxies to the Milky Way and has been playing a central role in various fields of modern astronomy and astrophysics. We conducted an unbiased near- to mid-infrared imaging and spectroscopic survey of the LMC with the infrared satellite AKARI. An area of about 10 square degrees of the LMC was observed by five imaging bands (each centered at 3.2, 7, 11, 15, and 24 micron) and the low-resolution slitless prism spectroscopy mode (2--5 micron, R~20) equipped with the Infrared Camera on board AKARI. Based on the data obtained in the survey, we constructed the photometric and spectroscopic catalogues of point sources in the LMC. The photometric catalogue includes about 650,000, 90,000, 49,000, 17,000, 7,000 sources at 3.2, 7, 11, 15, and 24 micron, respectively (Ita et al. 2008, PASJ, 60, 435; Kato et al. 2012, AJ, 144, 179), while the spectroscopic catalogue includes 1,757 sources (Shimonishi et al. 2013, AJ, 145, 32). Both catalogs are publicly released and available through a website (AKARI Observers Page, http://www.ir.isas.ac.jp/AKARI/Observation/). The catalog includes various infrared sources such as young stellar objects, asymptotic giant branch stars, giants/supergiants, and many other cool or dust-enshrouded stars. A large number of near-infrared spectral data, coupled with complementary broadband photometric data, allow us to investigate infrared spectral features of sources by comparison with their spectral energy distributions. Combined use of the present AKARI LMC catalogues with other infrared catalogues such as SAGE and HERITAGE possesses scientific potential that can be applied to various astronomical studies. In this presentation, we report the details of the AKARI photometric and spectroscopic catalogues of the LMC.

Documentation for the machine-readable version of the lick Saturn-Voyager Reference Star Catalogue

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1982-01-01

The machine-readable version of the catalog is described. The catalog was prepared in order to determine accurate equatorial coordinates for reference stars in a band of sky against which cameras of the Voyager spacecraft were aligned for observations in the region of Saturn during the flyby. Tape contents and characteristics are described and a sample listing presented.

100+ years of instrumental seismology: the example of the ISC-GEM Global Earthquake Instrumental Catalogue

NASA Astrophysics Data System (ADS)

Storchak, Dmitry; Di Giacomo, Domenico

2015-04-01

Systematic seismological observations of earthquakes using seismic instruments on a global scale began more than 100 years ago. Since then seismologists made many discoveries about the Earth interior and the physics of the earthquakes, also thanks to major developments in the seismic instrumentation deployed around the world. Besides, since the establishment of the first global networks (Milne and Jesuit networks), seismologists around the world stored and exchanged the results of routine observations (e.g., picking of arrival times, amplitude-period measurements, etc.) or more sophisticated analyses (e.g., moment tensor inversion) in seismological bulletins/catalogues. With a project funded by the GEM Foundation (www.globalquakemodel.org), the ISC and the Team of International Experts released a new global earthquake catalogue, the ISC-GEM Global Instrumental Earthquake Catalogue (1900 2009) (www.isc.ac.uk/iscgem/index.php), which, differently from previous global seismic catalogues, has the unique feature of covering the entire period of instrumental seismology with locations and magnitude re-assessed using modern approaches for the global earthquakes selected for processing (in the current version approximately 21,000). During the 110 years covered by the ISC-GEM catalogue many seismological developments occurred in terms of instrumentation, seismological practice and knowledge of the physics of the earthquakes. In this contribution we give a brief overview of the major milestones characterizing the last 100+ years of instrumental seismology that were relevant for the production of the ISC-GEM catalogue and the major challenges we faced to obtain a catalogue as homogenous as possible.

A radio spectral index map and catalogue at 147-1400 MHz covering 80 per cent of the sky

NASA Astrophysics Data System (ADS)

de Gasperin, F.; Intema, H. T.; Frail, D. A.

2018-03-01

The radio spectral index is a powerful probe for classifying cosmic radio sources and understanding the origin of the radio emission. Combining data at 147 MHz and 1.4 GHz from the TIFR GMRT Sky Survey (TGSS) and the NRAO VLA Sky Survey (NVSS), we produced a large-area radio spectral index map of ˜80 per cent of the sky (Dec. > - 40 deg), as well as a radio spectral index catalogue containing 1396 515 sources, of which 503 647 are not upper or lower limits. Almost every TGSS source has a detected counterpart, while this is true only for 36 per cent of NVSS sources. We released both the map and the catalogue to the astronomical community. The catalogue is analysed to discover systematic behaviours in the cosmic radio population. We find a differential spectral behaviour between faint and bright sources as well as between compact and extended sources. These trends are explained in terms of radio galaxy evolution. We also confirm earlier reports of an excess of steep-spectrum sources along the galactic plane. This corresponds to 86 compact and steep-spectrum source in excess compared to expectations. The properties of this excess are consistent with normal non-recycled pulsars, which may have been missed by pulsation searches due to larger than average scattering along the line of sight.

General catalogue of variable stars: Version GCVS 5.1

NASA Astrophysics Data System (ADS)

Samus', N. N.; Kazarovets, E. V.; Durlevich, O. V.; Kireeva, N. N.; Pastukhova, E. N.

2017-01-01

Work aimed at compiling detailed catalogs of variable stars in the Galaxy, which has been carried out continuously by Moscow variable-star researchers since 1946 on behalf of the International Astronomical Union, has entered the stage of the publication of the 5th, completely electronic edition of the General Catalogue of Variable Stars (GCVS). This paper describes the requirements for the contents of the 5th edition and the current state of the catalog in its new version, GCVS 5.1. The complete revision of information for variable stars in the constellation Carina and the compilation of the 81st Name-list of Variable Stars are considered as examples of work on the 5th edition. The GCVS 5.1 is freely accessible on the Internet. We recommend the present paper as a unified reference to the 5th edition of the GCVS.

Documentation for the machine-readable version of the Catalogue of Nearby Stars, edition 1969

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1982-01-01

The Catalogue of Nearby Stars, Edition 1969 (Gliese 1969) contains a number of modifications and additions to the 1957 catalog. It should be mentioned that the 1969 edition lists: (1) all 915 stars of the first edition, even though newer parallaxes place some of the stars below the catalog limit; (2) almost all known stars having trigonometric parallaxes or = 0.045 deg, although in some cases the mean values of trigonometric and spectral or photometric parallaxes are or = 0.045 deg. Pleiades stars and the carbon star X Cnc have been omitted; and (3) all stars with mean (resulting) parallaxes or = 0.045 deg. The resulting catalog contains 1529 single stars and systems with a total of 1890 components (not including spectroscopic and astrometric companions). The machine-readable version of the catalog is described. It is intended to enable users to read and process the data without problems or guesswork.

Site-specific probabilistic seismic hazard analyses for the Idaho National Engineering Laboratory. Volume 2: Appendices

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-05-01

The identification of seismic sources is often based on a combination of geologic and tectonic considerations and patterns of observed seismicity; hence, a historical earthquake catalogue is important. A historical catalogue of earthquakes of approximate magnitude (M) 2.5 and greater for the time period 1850 through 1992 was compiled for the INEL region. The primary data source used was the Decade of North American Geology (DNAG) catalogue for the time period from about 1800 through 1985 (Engdahl and Rinehart, 1988). A large number of felt earthquakes, especially prior to the 1970`s, which were below the threshold of completeness established inmore » the DNAG catalogue (Engdahl and Rinehart, 1991), were taken from the state catalogues compiled by Stover and colleagues at the National Earthquake Information Center (NEIC) and combined with the DNAG catalogue for the INEL region. The state catalogues were those of Idaho, Montana, Nevada, Utah, and Wyoming. NEIC`s Preliminary Determination of Epicenters (PDE) and the state catalogues compiled by the Oregon Department of Geology and Mineral Industries (DOGAMI), and the University of Nevada at Reno (UNR) were also used to supplement the pre-1986 time period. A few events reanalyzed by Jim Zollweg (Boise State University, written communication, 1994) were also modified in the catalogue. In the case of duplicate events, the DNAG entry was preferred over the Stover et al. entry for the period 1850 through 1985. A few events from Berg and Baker (1963) were also added to the catalogue. This information was and will be used in determining the seismic risk of buildings and facilities located at the Idaho National Engineering Laboratory.« less

An experiment in big data: storage, querying and visualisation of data taken from the Liverpool Telescope's wide field cameras

NASA Astrophysics Data System (ADS)

Barnsley, R. M.; Steele, Iain A.; Smith, R. J.; Mawson, Neil R.

2014-07-01

The Small Telescopes Installed at the Liverpool Telescope (STILT) project has been in operation since March 2009, collecting data with three wide field unfiltered cameras: SkycamA, SkycamT and SkycamZ. To process the data, a pipeline was developed to automate source extraction, catalogue cross-matching, photometric calibration and database storage. In this paper, modifications and further developments to this pipeline will be discussed, including a complete refactor of the pipeline's codebase into Python, migration of the back-end database technology from MySQL to PostgreSQL, and changing the catalogue used for source cross-matching from USNO-B1 to APASS. In addition to this, details will be given relating to the development of a preliminary front-end to the source extracted database which will allow a user to perform common queries such as cone searches and light curve comparisons of catalogue and non-catalogue matched objects. Some next steps and future ideas for the project will also be presented.

Matching radio catalogues with realistic geometry: application to SWIRE and ATLAS

NASA Astrophysics Data System (ADS)

Fan, Dongwei; Budavári, Tamás; Norris, Ray P.; Hopkins, Andrew M.

2015-08-01

Cross-matching catalogues at different wavelengths is a difficult problem in astronomy, especially when the objects are not point-like. At radio wavelengths, an object can have several components corresponding, for example, to a core and lobes. Considering not all radio detections correspond to visible or infrared sources, matching these catalogues can be challenging. Traditionally, this is done by eye for better quality, which does not scale to the large data volumes expected from the next-generation of radio telescopes. We present a novel automated procedure, using Bayesian hypothesis testing, to achieve reliable associations by explicit modelling of a particular class of radio-source morphology. The new algorithm not only assesses the likelihood of an association between data at two different wavelengths, but also tries to assess whether different radio sources are physically associated, are double-lobed radio galaxies, or just distinct nearby objects. Application to the Spitzer Wide-Area Infrared Extragalactic and Australia Telescope Large Area Survey CDF-S catalogues shows that this method performs well without human intervention.

The AKARI IRC asteroid flux catalogue: updated diameters and albedos

NASA Astrophysics Data System (ADS)

Alí-Lagoa, V.; Müller, T. G.; Usui, F.; Hasegawa, S.

2018-05-01

The AKARI IRC all-sky survey provided more than twenty thousand thermal infrared observations of over five thousand asteroids. Diameters and albedos were obtained by fitting an empirically calibrated version of the standard thermal model to these data. After the publication of the flux catalogue in October 2016, our aim here is to present the AKARI IRC all-sky survey data and discuss valuable scientific applications in the field of small body physical properties studies. As an example, we update the catalogue of asteroid diameters and albedos based on AKARI using the near-Earth asteroid thermal model (NEATM). We fit the NEATM to derive asteroid diameters and, whenever possible, infrared beaming parameters. We fit groups of observations taken for the same object at different epochs of the survey separately, so we compute more than one diameter for approximately half of the catalogue. We obtained a total of 8097 diameters and albedos for 5170 asteroids, and we fitted the beaming parameter for almost two thousand of them. When it was not possible to fit the beaming parameter, we used a straight line fit to our sample's beaming parameter-versus-phase angle plot to set the default value for each fit individually instead of using a single average value. Our diameters agree with stellar-occultation-based diameters well within the accuracy expected for the model. They also match the previous AKARI-based catalogue at phase angles lower than 50°, but we find a systematic deviation at higher phase angles, at which near-Earth and Mars-crossing asteroids were observed. The AKARI IRC All-sky survey is an essential source of information about asteroids, especially the large ones, since, it provides observations at different observation geometries, rotational coverages and aspect angles. For example, by comparing in more detail a few asteroids for which dimensions were derived from occultations, we discuss how the multiple observations per object may already provide three-dimensional information about elongated objects even based on an idealised model like the NEATM. Finally, we enumerate additional expected applications for more complex models, especially in combination with other catalogues. Full Table 1 is only available at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/612/A85

The nature of X-ray selected star candidates

NASA Astrophysics Data System (ADS)

Mickaelian, A. M.; Paronyan, G. M.; Abrahamyan, H. V.; Gigoyan, K. S.; Gyulzadyan, M. V.; Kostandyan, G. R.

2016-12-01

The joint HRC/BHRC catalogue of optical identifications of ROSAT BSC and FSC X-ray sources is based on merging the Hamburg-ROSAT Catalogue (HRC) and Byurakan-Hamburg-ROSAT Catalogue (BHRC). Both have been made by optical identifications of X-ray sources based on low-dispersion spectra of the Hamburg QuasarSurvey (HQS) using the ROSAT Catalogues. HRC/BHRC contains a sample of 8132 (5341+2791) optically identified X-ray sources with count rate (CR) of photons ≥ 0.04 ct/s in the area of the low-dispersion Hamburg Quasar Survey (HQS), |b| ≥ 20° and δ ≥ 0°. Based on low-dispersion spectral classification, there are 4253 AGN, 492 galaxies, 1800 stars and 1587 unknown objects in the sample. 1800 star candidates include 1429 objects listed in SDSS DR12 photometric catalogue and 433 given in SDSS spectroscopic catalogue. Using these spectra, we have carried out classification of these star candidates to reveal new interesting objects, as well as to define the true content of our sample. 34 cataclysmic variables (including 7 new ones), 19 white dwarfs, 19 late-type stars (K-M and C types), 16 early type stars (O-B), 40 hot coronal stars (A-F types), 2 composite spectrum objects, and 17 bright stars have been revealed, as well as 286 objects which turned out to be extragalactic ones; 75 emission-line galaxies (HII/SB and AGN, including QSOs, Seyferts, and LINERs) and 211 absorption line galaxies were revealed (wrong classifications in HRC/BHRC due to their faint images and low-quality spectra). We have retrieved multiwavelength data from recent catalogues and carried out statistical investigations of the multiwavelength properties for the whole sample of stars. All stars have been found in GSC 2.3.2, as well as most of them are in GALEX, USNO-B1.0, 2MASS and WISE catalogues. Relations between the radiation fluxes in different bands from X-ray to radio for different types of sources are studied and analysis of their characteristics is made. X-ray selected stars are an important complement to the stellar populations of our Galaxy in solar neighbourhood and beyond. Keywords: X-ray sources, cross-correlations, white dwarfs, cataclysmic variables, carbon stars

MinFinder v2.0: An improved version of MinFinder

NASA Astrophysics Data System (ADS)

Tsoulos, Ioannis G.; Lagaris, Isaac E.

2008-10-01

A new version of the "MinFinder" program is presented that offers an augmented linking procedure for Fortran-77 subprograms, two additional stopping rules and a new start-point rejection mechanism that saves a significant portion of gradient and function evaluations. The method is applied on a set of standard test functions and the results are reported. New version program summaryProgram title: MinFinder v2.0 Catalogue identifier: ADWU_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADWU_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC Licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 14 150 No. of bytes in distributed program, including test data, etc.: 218 144 Distribution format: tar.gz Programming language used: GNU C++, GNU FORTRAN, GNU C Computer: The program is designed to be portable in all systems running the GNU C++ compiler Operating system: Linux, Solaris, FreeBSD RAM: 200 000 bytes Classification: 4.9 Catalogue identifier of previous version: ADWU_v1_0 Journal reference of previous version: Computer Physics Communications 174 (2006) 166-179 Does the new version supersede the previous version?: Yes Nature of problem: A multitude of problems in science and engineering are often reduced to minimizing a function of many variables. There are instances that a local optimum does not correspond to the desired physical solution and hence the search for a better solution is required. Local optimization techniques can be trapped in any local minimum. Global optimization is then the appropriate tool. For example, solving a non-linear system of equations via optimization, one may encounter many local minima that do not correspond to solutions, i.e. they are far from zero. Solution method: Using a uniform pdf, points are sampled from a rectangular domain. A clustering technique, based on a typical distance and a gradient criterion, is used to decide from which points a local search should be started. Further searching is terminated when all the local minima inside the search domain are thought to be found. This is accomplished via three stopping rules: the "double-box" stopping rule, the "observables" stopping rule and the "expected minimizers" stopping rule. Reasons for the new version: The link procedure for source code in Fortran 77 is enhanced, two additional stopping rules are implemented and a new criterion for accepting-start points, that economizes on function and gradient calls, is introduced. Summary of revisions:Addition of command line parameters to the utility program make_program. Augmentation of the link process for Fortran 77 subprograms, by linking the final executable with the g2c library. Addition of two probabilistic stopping rules. Introduction of a rejection mechanism to the Checking step of the original method, that reduces the number of gradient evaluations. Additional comments: A technical report describing the revisions, experiments and test runs is packaged with the source code. Running time: Depending on the objective function.

Kepler Planet Detection Metrics: Pixel-Level Transit Injection Tests of Pipeline Detection Efficiency for Data Release 25

NASA Technical Reports Server (NTRS)

Christiansen, Jessie L.

2017-01-01

This document describes the results of the fourth pixel-level transit injection experiment, which was designed to measure the detection efficiency of both the Kepler pipeline (Jenkins 2002, 2010; Jenkins et al. 2017) and the Robovetter (Coughlin 2017). Previous transit injection experiments are described in Christiansen et al. (2013, 2015a,b, 2016).In order to calculate planet occurrence rates using a given Kepler planet catalogue, produced with a given version of the Kepler pipeline, we need to know the detection efficiency of that pipeline. This can be empirically determined by injecting a suite of simulated transit signals into the Kepler data, processing the data through the pipeline, and examining the distribution of successfully recovered transits. This document describes the results for the pixel-level transit injection experiment performed to accompany the final Q1-Q17 Data Release 25 (DR25) catalogue (Thompson et al. 2017)of the Kepler Objects of Interest. The catalogue was generated using the SOC pipeline version 9.3 and the DR25 Robovetter acting on the uniformly processed Q1-Q17 DR25 light curves (Thompson et al. 2016a) and assuming the Q1-Q17 DR25 Kepler stellar properties (Mathur et al. 2017).

Bayesian inference of stress release models applied to some Italian seismogenic zones

NASA Astrophysics Data System (ADS)

Rotondi, R.; Varini, E.

2007-04-01

In this paper, we evaluate the seismic hazard of a region in southern Italy by analysing stress release models from the Bayesian viewpoint; the data are drawn from the most recent version of the parametric catalogue of Italian earthquakes. For estimation we just use the events up to 1992, then we forecast the date of the next event through a stochastic simulation method and we compare the result with the really occurred shocks in the span 1993-2002. The original version of the stress release model, proposed by Vere-Jones in 1978, transposes Reid's elastic rebound theory in the framework of stochastic point processes. Since the nineties enriched versions of this model have appeared in the literature, applied to historical catalogues from China, Iran, Japan; they envisage the identification of independent or interacting tectonic subunits constituting the region under exam. It follows that the stress release models, designed for regional analyses, are evolving towards studies on fault segments, realizing some degree of convergence to those models that start from an individual fault and, considering the interactions with nearby segments, are driven to studies on regional scale. The optimal performance of the models we consider depends on a set of choices among which: the seismogenic region and possible subzones, the threshold magnitude, the length of the time period. In this paper, we focus our attention on the influence of the subdivision of the region under exam into tectonic units; in the light of the recent studies on the fault segmentation model of Italy we propose a partition of Sannio-Matese-Ofanto-Irpinia, one of the most seismically active region in southern Italy. The results show that the performance of the stress release models improves in terms of both fitting and forecasting when the region is split up into parts including new information about potential seismogenic sources.

High-energy sources at low radio frequency: the Murchison Widefield Array view of Fermi blazars

DOE PAGES

Giroletti, M.; Massaro, F.; D’Abrusco, R.; ...

2016-04-01

Low-frequency radio arrays are opening a new window for the study of the sky, both to study new phenomena and to better characterize known source classes. Being flat-spectrum sources, blazars are so far poorly studied at low radio frequencies. In this paper, we characterize the spectral properties of the blazar population at low radio frequency, compare the radio and high-energy properties of the gamma-ray blazar population, and search for radio counterparts of unidentified gamma-ray sources. We cross-correlated the 6100 deg 2 Murchison Widefield Array Commissioning Survey catalogue with the Roma blazar catalogue, the third catalogue of active galactic nuclei detectedmore » by Fermi-LAT, and the unidentified members of the entire third catalogue of gamma-ray sources detected by Fermi-LAT. When available, we also added high-frequency radio data from the Australia Telescope 20 GHz catalogue. We find low-frequency counterparts for 186 out of 517 (36%) blazars, 79 out of 174 (45%) gamma-ray blazars, and 8 out of 73 (11%) gamma-ray blazar candidates. The mean low-frequency (120–180 MHz) blazar spectral index is (α low) = 0.57 ± 0.02: blazar spectra are flatter than the rest of the population of low-frequency sources, but are steeper than at ~GHz frequencies. Low-frequency radio flux density and gamma-ray energy flux display a mildly significant and broadly scattered correlation. Ten unidentified gamma-ray sources have a (probably fortuitous) positional match with low radio frequency sources. Low-frequency radio astronomy provides important information about sources with a flat radio spectrum and high energy. However, the relatively low sensitivity of the present surveys still misses a significant fraction of these objects. Finally, upcoming deeper surveys, such as the GaLactic and Extragalactic All-Sky MWA (GLEAM) survey, will provide further insight into this population.« less

High-energy sources at low radio frequency: the Murchison Widefield Array view of Fermi blazars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giroletti, M.; Massaro, F.; D’Abrusco, R.

Low-frequency radio arrays are opening a new window for the study of the sky, both to study new phenomena and to better characterize known source classes. Being flat-spectrum sources, blazars are so far poorly studied at low radio frequencies. In this paper, we characterize the spectral properties of the blazar population at low radio frequency, compare the radio and high-energy properties of the gamma-ray blazar population, and search for radio counterparts of unidentified gamma-ray sources. We cross-correlated the 6100 deg 2 Murchison Widefield Array Commissioning Survey catalogue with the Roma blazar catalogue, the third catalogue of active galactic nuclei detectedmore » by Fermi-LAT, and the unidentified members of the entire third catalogue of gamma-ray sources detected by Fermi-LAT. When available, we also added high-frequency radio data from the Australia Telescope 20 GHz catalogue. We find low-frequency counterparts for 186 out of 517 (36%) blazars, 79 out of 174 (45%) gamma-ray blazars, and 8 out of 73 (11%) gamma-ray blazar candidates. The mean low-frequency (120–180 MHz) blazar spectral index is (α low) = 0.57 ± 0.02: blazar spectra are flatter than the rest of the population of low-frequency sources, but are steeper than at ~GHz frequencies. Low-frequency radio flux density and gamma-ray energy flux display a mildly significant and broadly scattered correlation. Ten unidentified gamma-ray sources have a (probably fortuitous) positional match with low radio frequency sources. Low-frequency radio astronomy provides important information about sources with a flat radio spectrum and high energy. However, the relatively low sensitivity of the present surveys still misses a significant fraction of these objects. Finally, upcoming deeper surveys, such as the GaLactic and Extragalactic All-Sky MWA (GLEAM) survey, will provide further insight into this population.« less

The Planck Catalogue of Galactic Cold Clumps : Looking at the early stages of star-formation

NASA Astrophysics Data System (ADS)

Montier, Ludovic

2015-08-01

The Planck satellite has provided an unprecedented view of the submm sky, allowing us to search for the dust emission of Galactic cold sources. Combining Planck-HFI all-sky maps in the high frequency channels with the IRAS map at 100um, we built the Planck catalogue of Galactic Cold Clumps (PGCC, Planck 2015 results XXVIII 2015), counting 13188 sources distributed over the whole sky, and following mainly the Galactic structures at low and intermediate latitudes. This is the first all-sky catalogue of Galactic cold sources obtained with a single instrument at this resolution and sensitivity, which opens a new window on star-formation processes in our Galaxy.I will briefly describe the colour detection method used to extract the Galactic cold sources, i.e., the Cold Core Colour Detection Tool (CoCoCoDeT, Montier et al. 2010), and its application to the Planck data. I will discuss the statistical distribution of the properties of the PGCC sources (in terms of dust temperature, distance, mass, density and luminosity), which illustrates that the PGCC catalogue spans a large variety of environments and objects, from molecular clouds to cold cores, and covers various stages of evolution. The Planck catalogue is a very powerful tool to study the formation and the evolution of prestellar objects and star-forming regions.I will finally present an overview of the Herschel Key Program Galactic Cold Cores (PI. M.Juvela), which allowed us to follow-up about 350 Planck Galactic Cold Clumps, in various stages of evolution and environments. With this program, the nature and the composition of the 5' Planck sources have been revealed at a sub-arcmin resolution, showing very different configurations, such as starless cold cores or multiple Young Stellar objects still embedded in their cold envelope.

T-RaMiSu: the Two-meter Radio Mini Survey. I. The Boötes Field

NASA Astrophysics Data System (ADS)

Williams, W. L.; Intema, H. T.; Röttgering, H. J. A.

2013-01-01

We present wide area, deep, high-resolution 153 MHz GMRT observations of the NOAO Boötes field, adding to the extensive, multi-wavelength data of this region. The observations, data reduction, and catalogue construction and description are described here. The seven pointings produced a final mosaic covering 30 square degrees with a resolution of 25″. The rms noise is 2 mJy beam-1 in the centre of the image, rising to 4-5 mJy beam-1 on the edges, with an average of 3 mJy beam-1. Seventy-five per cent of the area has an rms <4 mJy beam-1. The extracted source catalogue contains 1289 sources detected at 5σ, of which 453 are resolved. We estimate the catalogue to be 92 per cent reliable and 95 per cent complete at an integrated flux density limit of 14 mJy. The flux densities and astrometry have been corrected for systematic errors. We calculate the differential source counts, which are in good agreement with those in the literature and provide an important step forward in quantifying the source counts at these low frequencies and low flux densities. The GMRT 153 MHz sources have been matched to the 1.4 GHz NVSS and 327 MHz WENSS catalogues and spectral indices were derived. Table A.1 (Catalogue) is only available in electronic form at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/549/A55

Multifractal Omori law for earthquake triggering: new tests on the California, Japan and worldwide catalogues

NASA Astrophysics Data System (ADS)

Ouillon, G.; Sornette, D.; Ribeiro, E.

2009-07-01

The Multifractal Stress-Activated model is a statistical model of triggered seismicity based on mechanical and thermodynamic principles. It predicts that, above a triggering magnitude cut-off M0, the exponent p of the Omori law for the time decay of the rate of aftershocks is a linear increasing function p(M) = a0M + b0 of the main shock magnitude M. We previously reported empirical support for this prediction, using the Southern California Earthquake Center (SCEC) catalogue. Here, we confirm this observation using an updated, longer version of the same catalogue, as well as new methods to estimate p. One of this methods is the newly defined Scaling Function Analysis (SFA), adapted from the wavelet transform. This method is able to measure a mathematical singularity (hence a p-value), erasing the possible regular part of a time-series. The SFA also proves particularly efficient to reveal the coexistence and superposition of several types of relaxation laws (typical Omori sequences and short-lived swarms sequences) which can be mixed within the same catalogue. Another new method consists in monitoring the largest aftershock magnitude observed in successive time intervals, and thus shortcuts the problem of missing events with small magnitudes in aftershock catalogues. The same methods are used on data from the worldwide Harvard Centroid Moment Tensor (CMT) catalogue and show results compatible with those of Southern California. For the Japan Meteorological Agency (JMA) catalogue, we still observe a linear dependence of p on M, but with a smaller slope. The SFA shows however that results for this catalogue may be biased by numerous swarm sequences, despite our efforts to remove them before the analysis.

VizieR Online Data Catalog: Dwarf novae outbursts properties (Otulakowska-Hypka+, 2016)

NASA Astrophysics Data System (ADS)

Otulakowska-Hypka, M.; Olech, A.; Patterson, J.

2017-11-01

In this study, we used the following available catalogue data sources. The catalogue and atlas of CVs (https://archive.stsci.edu/prepds/cvcat/) by Downes et al. (2001PASP..113..764D, Cat. V/123) which contains 1830 objects that have been classified as a CV before 2006 February 1, when the catalogue was frozen. Catalogue of cataclysmic binaries, low-mass X-ray binaries and related objects (http://www.mpa-garching.mpg.de/RKcat/) by Ritter & Kolb (2003A&A...404..301R, Cat. B/cb). Although the reference corresponds to a catalogue which is over 10yr old, its newest edition 7.21 (2013 December 31) has been used in this study. This catalogue contains 1094 CVs. Catalogue of J. Patterson, that is the supplementary electronic material to the publication Patterson (2011) containing properties of 292 non-magnetic CVs with orbital periods smaller than 3h (http://cbastro.org/dwarfnovashort/) (1 data file).

Research and characterisation of blazar candidates among the Fermi/LAT 3FGL catalogue using multivariate classifications

NASA Astrophysics Data System (ADS)

Lefaucheur, Julien; Pita, Santiago

2017-06-01

Context. In the recently published 3FGL catalogue, the Fermi/LAT collaboration reports the detection of γ-ray emission from 3034 sources obtained after four years of observations. The nature of 1010 of those sources is unknown, whereas 2023 have well-identified counterparts in other wavelengths. Most of the associated sources are labelled as blazars (1717/2023), but the BL Lac or FSRQ nature of 573 of these blazars is still undetermined. Aims: The aim of this study was two-fold. First, to significantly increase the number of blazar candidates from a search among the large number of Fermi/LAT 3FGL unassociated sources (case A). Second, to determine the BL Lac or FSRQ nature of the blazar candidates, including those determined as such in this work and the blazar candidates of uncertain type (BCU) that are already present in the 3FGL catalogue (case B). Methods: For this purpose, multivariate classifiers - boosted decision trees and multilayer perceptron neural networks - were trained using samples of labelled sources with no caution flag from the 3FGL catalogue and carefully chosen discriminant parameters. The decisions of the classifiers were combined in order to obtain a high level of source identification along with well controlled numbers of expected false associations. Specifically for case A, dedicated classifications were generated for high (| b | >10◦) and low (| b | ≤10◦) galactic latitude sources; in addition, the application of classifiers to samples of sources with caution flag was considered separately, and specific performance metrics were estimated. Results: We obtained a sample of 595 blazar candidates (high and low galactic latitude) among the unassociated sources of the 3FGL catalogue. We also obtained a sample of 509 BL Lacs and 295 FSRQs from the blazar candidates cited above and the BCUs of the 3FGL catalogue. The number of expected false associations is given for different samples of candidates. It is, in particular, notably low ( 9/425) for the sample of high-latitude blazar candidates from case A. Full Tables 5 and 7 are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/602/A86

A 2 epoch proper motion catalogue from the UKIDSS Large Area Survey

NASA Astrophysics Data System (ADS)

Smith, Leigh; Lucas, Phil; Burningham, Ben; Jones, Hugh; Pinfield, David; Smart, Ricky; Andrei, Alexandre

2013-04-01

The UKIDSS Large Area Survey (LAS) began in 2005, with the start of the UKIDSS program as a 7 year effort to survey roughly 4000 square degrees at high galactic latitudes in Y, J, H and K bands. The survey also included a significant quantity of 2-epoch J band observations, with epoch baselines ranging from 2 to 7 years. We present a proper motion catalogue for the 1500 square degrees of the 2 epoch LAS data, which includes some 800,000 sources with motions detected above the 5σ level. We developed a bespoke proper motion pipeline which applies a source-unique second order polynomial transformation to UKIDSS array coordinates of each source to counter potential local non-uniformity in the focal plane. Our catalogue agrees well with the proper motion data supplied in the current WFCAM Science Archive (WSA) DR9 catalogue where there is overlap, and in various optical catalogues, but it benefits from some improvements. One improvement is that we provide absolute proper motions, using LAS galaxies for the relative to absolute correction. Also, by using unique, local, 2nd order polynomial tranformations, as opposed to the linear transformations in the WSA, we correct better for any local distortions in the focal plane, not including the radial distortion that is removed by their pipeline.

Gaia DR1 documentation Chapter 7: Catalogue consolidation and validation

NASA Astrophysics Data System (ADS)

Arenou, F.; Babusiaux, C.; Blanco-Cuaresma, S.; Borrachero, R.; Cantat-Gaudin, T.; Fabricius, C.; Findeisen, K.; Helmi, A.; Hutton, A.; Luri, X.; Marrese, P.; Marinoni, S.; Marrese, P.; Robin, A.; Sordo, R.; Soria, S.; Turon, C.; Utrilla Molina, E.; Vallenari, A.

2017-12-01

The Gaia Catalogue does not only produce a wealth of data, it also represents a complex processing before a Catalogue can be issued. The main data processing is being handled by three DPAC Coordination Units, CU3 for the astrometric data, CU5 for the photometric data and CU6 for the spectroscopic data. Then three Coordination Units analyse the processed data, CU4 for optical or binary stars, solar system objects and extended objects, CU7 for variable stars, and CU8 for classification. Finally, CU9 takes care of the intermediate and final publication of the Gaia data. For Gaia DR1, the situation has been simplified in the sense that CU4, CU6 and CU8 did not contribute to the first Catalogue. At the last step, several data fields may have been computed by several Coordination Units (e.g., parallaxes computed by CU3, then again by CU4 with a fit of an astrometric + binary model if the star happens to have a significant binary motion; or a mean magnitude computed by CU5 may be superseded by another estimation from CU7 if the stars happens to be a periodic variable; etc.), in several Data Processing Centres, so an (a) homogeneous, (b) convenient, (c) consistent Catalogue has to be built. First, to a so-called CompleteSource is attached astrometric and photometric information, then possible variability information is integrated, producing an homogeneous Catalogue. Second, sources that do not meet some minimum astrometric or photometric quality are filtered out. The filters applied are described in Section 4 of Gaia Collaboration et al. (2016a). Third, while flat files are kept for further operations, the data is integrated inside the Gaia Archive Core System (GACS) database; crossmatch with external catalogues is also performed, providing the convenient access to the data. Fourth, the consistency of the Catalogue is obtained through a dedicated validation of its content. Sources that do not pass the validation criteria are then filtered out. This chapter describes these successive steps which are being followed for the consolidation of the Catalogue.

Finding X-ray counterparts for unidentified sources in the 105 months BAT survey - 1

NASA Astrophysics Data System (ADS)

Stephen, J. B.; Bassani, L.; Malizia, A.; Masetti, N.; Ubertini, P.

2018-02-01

We provide X-ray counterparts for the unidentified Swift/BAT sources listed in the 105 month catalogue (Oh et al. 2018, ApJS in press). These associations were found by cross-correlating the list of U1,U2 and U3 sources with the ROSAT Bright (RASSBSC, Voges et al. 1999, A & A, 349, 389) and the XMM-Newton Slew (XMMSlew, Saxton et al. 2008, A & A, 480, 611) catalogues.

NIR Tully-Fisher in the Zone of Avoidance - III. Deep NIR catalogue of the HIZOA galaxies

NASA Astrophysics Data System (ADS)

Said, Khaled; Kraan-Korteweg, Renée C.; Jarrett, T. H.; Staveley-Smith, Lister; Williams, Wendy L.

2016-11-01

We present a deep near-infrared (NIR; J, H, and Ks bands) photometric catalogue of sources from the Parkes H I Zone of Avoidance (HIZOA) survey, which forms the basis for an investigation of the matter distribution in the Zone of Avoidance. Observations were conducted between 2006 and 2013 using the Infrared Survey Facility (IRSF), a 1.4-m telescope situated at the South African Astronomical Observatory site in Sutherland. The images cover all 1108 HIZOA detections and yield 915 galaxies. An additional 105 bright 2MASS galaxies in the southern ZOA were imaged with the IRSF, resulting in 129 galaxies. The average Ks-band seeing and sky background for the survey are 1.38 arcsec and 20.1 mag, respectively. The detection rate as a function of stellar density and dust extinction is found to depend mainly on the H I mass of the H I detected galaxies, which in principal correlates with the NIR brightness of the spiral galaxies. The measured isophotal magnitudes are of sufficient accuracy (errors ˜0.02 mag) to be used in a Tully-Fisher analysis. In the final NIR catalogue, 285 galaxies have both IRSF and 2MASS photometry (180 HIZOA plus 105 bright 2MASX galaxies). The Ks-band isophotal magnitudes presented in this paper agree, within the uncertainties, with those reported in the 2MASX catalogue. Another 30 galaxies, from the HIZOA northern extension, are also covered by UKIDSS Galactic Plane Survey (GPS) images, which are one magnitude deeper than our IRSF images. A modified version of our photometry pipeline was used to derive the photometric parameters of these UKIDSS galaxies. Good agreement was found between the respective Ks-band isophotal magnitudes. These comparisons confirm the robustness of the isophotal parameters and demonstrate that the IRSF images do not suffer from foreground contamination, after star removal, nor underestimate the isophotal fluxes of ZoA galaxies.

Global catalogue of microorganisms (gcm): a comprehensive database and information retrieval, analysis, and visualization system for microbial resources

PubMed Central

2013-01-01

Background Throughout the long history of industrial and academic research, many microbes have been isolated, characterized and preserved (whenever possible) in culture collections. With the steady accumulation in observational data of biodiversity as well as microbial sequencing data, bio-resource centers have to function as data and information repositories to serve academia, industry, and regulators on behalf of and for the general public. Hence, the World Data Centre for Microorganisms (WDCM) started to take its responsibility for constructing an effective information environment that would promote and sustain microbial research data activities, and bridge the gaps currently present within and outside the microbiology communities. Description Strain catalogue information was collected from collections by online submission. We developed tools for automatic extraction of strain numbers and species names from various sources, including Genbank, Pubmed, and SwissProt. These new tools connect strain catalogue information with the corresponding nucleotide and protein sequences, as well as to genome sequence and references citing a particular strain. All information has been processed and compiled in order to create a comprehensive database of microbial resources, and was named Global Catalogue of Microorganisms (GCM). The current version of GCM contains information of over 273,933 strains, which includes 43,436bacterial, fungal and archaea species from 52 collections in 25 countries and regions. A number of online analysis and statistical tools have been integrated, together with advanced search functions, which should greatly facilitate the exploration of the content of GCM. Conclusion A comprehensive dynamic database of microbial resources has been created, which unveils the resources preserved in culture collections especially for those whose informatics infrastructures are still under development, which should foster cumulative research, facilitating the activities of microbiologists world-wide, who work in both public and industrial research centres. This database is available from http://gcm.wfcc.info. PMID:24377417

VizieR Online Data Catalog: XMM-Newton point-source catalogue of the SMC (Sturm+, 2013)

NASA Astrophysics Data System (ADS)

Sturm, R.; Haberl, F.; Pietsch, W.; Ballet, J.; Hatzidimitriou, D.; Buckley, D. A. H.; Coe, M.; Ehle, M.; Filipovic, M. D.; La Palombara, N.; Tiengo, A.

2013-07-01

The XMM-Newton survey of the Small Magellanic Cloud (SMC) yields a complete coverage of the bar and eastern wing in the 0.2-12.0keV band. This catalogue comprises 3053 unique X-ray point sources and sources with moderate extent that have been reduced from 5236 individual detections found in observations between April 2000 and April 2010. Sources have a median position uncertainty of 1.3" (1σ) and limiting fluxes down to ~1*10-14erg/s/cm2 in the 0.2-4.5keV band, corresponding to 5*1033erg/s for sources in the SMC. Sources have been classified using hardness ratios, X-ray variability, and their multi-wavelength properties. In addition to the main-field (5.58deg2) available outer fields have been included in the catalogue, yielding a total field area of 6.32deg2. X-ray sources with high extent (>40", e.g. supernova remnants and galaxy cluster) have been presented by Haberl et al. (2012, Cat. J/A+A/545/A128) (2 data files).

LSDCat: Detection and cataloguing of emission-line sources in integral-field spectroscopy datacubes

NASA Astrophysics Data System (ADS)

Herenz, Edmund Christian; Wisotzki, Lutz

2017-06-01

We present a robust, efficient, and user-friendly algorithm for detecting faint emission-line sources in large integral-field spectroscopic datacubes together with the public release of the software package Line Source Detection and Cataloguing (LSDCat). LSDCat uses a three-dimensional matched filter approach, combined with thresholding in signal-to-noise, to build a catalogue of individual line detections. In a second pass, the detected lines are grouped into distinct objects, and positions, spatial extents, and fluxes of the detected lines are determined. LSDCat requires only a small number of input parameters, and we provide guidelines for choosing appropriate values. The software is coded in Python and capable of processing very large datacubes in a short time. We verify the implementation with a source insertion and recovery experiment utilising a real datacube taken with the MUSE instrument at the ESO Very Large Telescope. The LSDCat software is available for download at http://muse-vlt.eu/science/tools and via the Astrophysics Source Code Library at http://ascl.net/1612.002

Calculating Proper Motions in the WFCAM Science Archive for the UKIRT Infrared Deep Sky Surveys

NASA Astrophysics Data System (ADS)

Collins, R.; Hambly, N.

2012-09-01

The ninth data release from the UKIRT Infrared Deep Sky Surveys (hereafter UKIDSS DR9), represents five years worth of observations by its wide-field camera (WFCAM) and will be the first to include proper motion values in its source catalogues for the shallow, wide-area surveys; the Large Area Survey (LAS), Galactic Clusters Survey (GCS) and (ultimately) Galactic Plane Survey (GPS). We, the Wide Field Astronomy Unit (WFAU) at the University of Edinburgh who prepare these regular data releases in the WFCAM Science Archive (WSA), describe in this paper how we make optimal use of the individual detection catalogues from each observation to derive high-quality astrometric fits for the positions of each detection enabling us to calculate a proper motion solution across multiple epochs and passbands when constructing a merged source catalogue. We also describe how the proper motion solutions affect the calculation of the various attributes provided in the database source catalogue tables, what measures of data quality we provide and a demonstration of the results for observations of the Pleiades cluster.

Securing the AliEn File Catalogue - Enforcing authorization with accountable file operations

NASA Astrophysics Data System (ADS)

Schreiner, Steffen; Bagnasco, Stefano; Sankar Banerjee, Subho; Betev, Latchezar; Carminati, Federico; Vladimirovna Datskova, Olga; Furano, Fabrizio; Grigoras, Alina; Grigoras, Costin; Mendez Lorenzo, Patricia; Peters, Andreas Joachim; Saiz, Pablo; Zhu, Jianlin

2011-12-01

The AliEn Grid Services, as operated by the ALICE Collaboration in its global physics analysis grid framework, is based on a central File Catalogue together with a distributed set of storage systems and the possibility to register links to external data resources. This paper describes several identified vulnerabilities in the AliEn File Catalogue access protocol regarding fraud and unauthorized file alteration and presents a more secure and revised design: a new mechanism, called LFN Booking Table, is introduced in order to keep track of access authorization in the transient state of files entering or leaving the File Catalogue. Due to a simplification of the original Access Envelope mechanism for xrootd-protocol-based storage systems, fundamental computational improvements of the mechanism were achieved as well as an up to 50% reduction of the credential's size. By extending the access protocol with signed status messages from the underlying storage system, the File Catalogue receives trusted information about a file's size and checksum and the protocol is no longer dependent on client trust. Altogether, the revised design complies with atomic and consistent transactions and allows for accountable, authentic, and traceable file operations. This paper describes these changes as part and beyond the development of AliEn version 2.19.

Finding X-ray counterparts for unidentified sources in the 105 months BAT survey - 2

NASA Astrophysics Data System (ADS)

Stephen, J. B.; Bassani, L.; Malizia, A.; Masetti, N.; Ubertini, P.

2018-02-01

We provide X-ray counterparts for unidentified Swift/BAT sources in the 105 month catalogue (Oh et al. 2018, ApJS in press). They were found by cross-correlating the list of U1,U2 and U3 sources with the ROSAT Bright (RASSBSC, Voges et al. 1999, A & A, 349, 389) and XMM-Newton Slew (XMMSlew, Saxton et al. 2008, A & A, 480, 611) catalogues and optically identified as reported in Atel #11340.

Improving fast generation of halo catalogues with higher order Lagrangian perturbation theory

NASA Astrophysics Data System (ADS)

Munari, Emiliano; Monaco, Pierluigi; Sefusatti, Emiliano; Castorina, Emanuele; Mohammad, Faizan G.; Anselmi, Stefano; Borgani, Stefano

2017-03-01

We present the latest version of PINOCCHIO, a code that generates catalogues of dark matter haloes in an approximate but fast way with respect to an N-body simulation. This code version implements a new on-the-fly production of halo catalogue on the past light cone with continuous time sampling, and the computation of particle and halo displacements are extended up to third-order Lagrangian perturbation theory (LPT), in contrast with previous versions that used Zel'dovich approximation. We run PINOCCHIO on the same initial configuration of a reference N-body simulation, so that the comparison extends to the object-by-object level. We consider haloes at redshifts 0 and 1, using different LPT orders either for halo construction or to compute halo final positions. We compare the clustering properties of PINOCCHIO haloes with those from the simulation by computing the power spectrum and two-point correlation function in real and redshift space (monopole and quadrupole), the bispectrum and the phase difference of halo distributions. We find that 2LPT and 3LPT give noticeable improvement. 3LPT provides the best agreement with N-body when it is used to displace haloes, while 2LPT gives better results for constructing haloes. At the highest orders, linear bias is typically recovered at a few per cent level. In Fourier space and using 3LPT for halo displacements, the halo power spectrum is recovered to within 10 per cent up to kmax ∼ 0.5 h Mpc-1. The results presented in this paper have interesting implications for the generation of large ensemble of mock surveys for the scientific exploitation of data from big surveys.

The new OGC Catalogue Services 3.0 specification - status of work

NASA Astrophysics Data System (ADS)

Bigagli, Lorenzo; Voges, Uwe

2013-04-01

We report on the work of the Open Geospatial Consortium Catalogue Services 3.0 Standards Working Group (OGC Cat 3.0 SWG for short), started in March 2008, with the purpose to process change requests on the Catalogue Services 2.0.2 Implementation Specification (OGC 07-006r1) and produce a revised version thereof, comprising the related XML schemas and abstract test suite. The work was initially intended as a minor revision (version 2.1), but later retargeted as a major update of the standard and rescheduled (the anticipated roadmap ended in 2008). The target audience of Catalogue Services 3.0 includes: • Implementors of catalogue services solutions. • Designers and developers of catalogue services profiles. • Providers/users of catalogue services. The two main general areas of enhancement included: restructuring the specification document according to the OGC standard for modular specifications (OGC 08-131r3, also known as Core and Extension model); incorporating the current mass-market technologies for discovery on the Web, namely OpenSearch. The document was initially split into four parts: the general model and the three protocol bindings HTTP, Z39.50, and CORBA. The CORBA binding, which was very rarely implemented, and the Z39.50 binding have later been dropped. Parts of the Z39.50 binding, namely Search/Retrieve via URL (SRU; same semantics as Z39.50, but stateless), have been provided as a discussion paper (OGC 12-082) for possibly developing a future SRU profile. The Catalogue Services 3.0 specification is structured as follows: • Part 1: General Model (Core) • Part 2: HTTP Protocol Binding (CSW) In CSW, the GET/KVP encoding is mandatory. The POST/XML encoding is optional. SOAP is supported as a special case of the POST/XML encoding. OpenSearch must always be supported, regardless of the implemented profiles, along with the OpenSearch Geospatial and Temporal Extensions (OGC 10-032r2). The latter specifies spatial (e.g. point-plus-radius, bounding box, polygons, in EPSG:4326/WGS84 coordinates) and temporal constraints (e.g. time start/end) for searching. The temporal extent (begin/end) is added as a core queryable and returnable property. Plenty of other changes are incorporated, including improvements to query distribution, WSDL and schema documents, requirements and conformance classes. In conclusion, CS 3.0 is a long-awaited revision of the previous CS 2.0.2 Implementation Specification (approved in early 2007), whose requirements started to be collected as early as July 2007. Various profiles of CS 2.0.2 exist, with related dependencies, and will need to be harmonized with this specification.

Documentation for the machine-readable version of the Smithsonian Astrophysical Observatory Star catalogue (SAO) version 1984

NASA Technical Reports Server (NTRS)

Roman, N. G.; Warren, W. H., Jr.

1984-01-01

An updated, corrected and extended machine readable version of the Smithsonian Astrophysical Observatory star catalog (SAO) is described. Published and unpublished errors discovered in the previous version have been corrected, and multiple star and supplemental BD identifications added to stars where more than one SAO entry has the same Durchmusterung number. Henry Draper Extension (HDE) numbers have been added for stars found in both volumes of the extension. Data for duplicate SAO entries (those referring to the same star) have been blanked out, but the records themselves have been retained and flagged so that sequencing and record count are identical to the published catalog.

Updated earthquake catalogue for seismic hazard analysis in Pakistan

NASA Astrophysics Data System (ADS)

Khan, Sarfraz; Waseem, Muhammad; Khan, Muhammad Asif; Ahmed, Waqas

2018-03-01

A reliable and homogenized earthquake catalogue is essential for seismic hazard assessment in any area. This article describes the compilation and processing of an updated earthquake catalogue for Pakistan. The earthquake catalogue compiled in this study for the region (quadrangle bounded by the geographical limits 40-83° N and 20-40° E) includes 36,563 earthquake events, which are reported as 4.0-8.3 moment magnitude (M W) and span from 25 AD to 2016. Relationships are developed between the moment magnitude and body, and surface wave magnitude scales to unify the catalogue in terms of magnitude M W. The catalogue includes earthquakes from Pakistan and neighbouring countries to minimize the effects of geopolitical boundaries in seismic hazard assessment studies. Earthquakes reported by local and international agencies as well as individual catalogues are included. The proposed catalogue is further used to obtain magnitude of completeness after removal of dependent events by using four different algorithms. Finally, seismicity parameters of the seismic sources are reported, and recommendations are made for seismic hazard assessment studies in Pakistan.

VizieR Online Data Catalog: Planck Sunyaev-Zeldovich sources (PSZ2) (Planck+, 2016)

NASA Astrophysics Data System (ADS)

Planck Collaboration; Ade, P. A. R.; Aghanim, N.; Arnaud, M.; Ashdown, M.; Aumont, J.; Baccigalupi, C.; Banday, A. J.; Barreiro, R. B.; Barrena, R.; Bartlett, J. G.; Bartolo, N.; Battaner, E.; Battye, R.; Benabed, K.; Benoit, A.; Benoit-Levy, A.; Bernard, J.-P.; Bersanelli, M.; Bielewicz, P.; Bikmaev, I.; Bohringer, H.; Bonaldi, A.; Bonavera, L.; Bond, J. R.; Borrill, J.; Bouchet, F. R.; Bucher, M.; Burenin, R.; Burigana, C.; Butler, R. C.; Calabrese, E.; Cardoso, J.-F.; Carvalho, P.; Catalano, A.; Challinor, A.; Chamballu, A.; Chary, R.-R.; Chiang, H. C.; Chon, G.; Christensen, P. R.; Clements, D. L.; Colombi, S.; Colombo, L. P. L.; Combet, C.; Comis, B.; Couchot, F.; Coulais, A.; Crill, B. P.; Curto, A.; Cuttaia, F.; Dahle, H.; Danese, L.; Davies, R. D.; Davis, R. J.; de Bernardis, P.; De Rosa, A.; de Zotti, G.; Delabrouille, J.; Desert, F.-X.; Dickinson, C.; Diego, J. M.; Dolag, K.; Dole, H.; Donzelli, S.; Dore, O.; Douspis, M.; Ducout, A.; Dupac, X.; Efstathiou, G.; Eisenhardt, P. R. M.; Elsner, F.; Ensslin, T. A.; Eriksen, H. K.; Falgarone, E.; Fergusson, J.; Feroz, F.; Ferragamo, A.; Finelli, F.; Forni, O.; Frailis, M.; Fraisse, A. A.; Franceschi, E.; Frejsel, A.; Galeotta, S.; Galli, S.; Ganga, K.; Genova-Santos, R. T.; Giard, M.; Giraud-Heraud, Y.; Gjerlow, E.; Gonzalez-Nuevo, J.; Gorski, K. M.; Grainge, K. J. B.; Gratton, S.; Gregorio, A.; Gruppuso, A.; Gudmundsson, J. E.; Hansen, F. K.; Hanson, D.; Harrison, D. L.; Hempel, A.; Henrot-Versille, S.; Hernandez-Monteagudo, C.; Herranz, D.; Hildebrandt, S. R.; Hivon, E.; Hobson, M.; Holmes, W. A.; Hornstrup, A.; Hovest, W.; Huffenberger, K. M.; Hurier, G.; Jaffe, A. H.; Jaffe, T. R.; Jin, T.; Jones, W. C.; Juvela, M.; Keihanen, E.; Keskitalo, R.; Khamitov, I.; Kisner, T. S.; Kneissl, R.; Knoche, J.; Kunz, M.; Kurki-Suonio, H.; Lagache, G.; Lamarre, J.-M.; Lasenby, A.; Lattanzi, M.; Lawrence, C. R.; Leonardi, R.; Lesgourgues, J.; Levrier, F.; Liguori, M.; Lilje, P. B.; Linden-Vornle, M.; Lopez-Caniego, M.; Lubin, P. M.; Macias-Perez, J. F.; Maggio, G.; Maino, D.; Mak, D. S. Y.; Mandolesi, N.; Mangilli, A.; Martin, P. G.; Martinez-Gonzalez, E.; Masi, S.; Matarrese, S.; Mazzotta, P.; McGehee, P.; Mei, S.; Melchiorri, A.; Melin, J.-B.; Mendes, L.; Mennella, A.; Migliaccio, M.; Mitra, S.; Miville-Deschenes, M.-A.; Moneti, A.; Montier, L.; Morgante, G.; Mortlock, D.; Moss, A.; Munshi, D.; Murphy, J. A.; Naselsky, P.; Nastasi, A.; Nati, F.; Natoli, P.; Netterfield, C. B.; Norgaard-Nielsen, H. U.; Noviello, F.; Novikov, D.; Novikov, I.; Olamaie, M.; Oxborrow, C. A.; Paci, F.; Pagano, L.; Pajot, F.; Paoletti, D.; Pasian, F.; Patanchon, G.; Pearson, T. J.; Perdereau, O.; Perotto, L.; Perrott, Y. C.; Perrotta, F.; Pettorino, V.; Piacentini, F.; Piat, M.; Pierpaoli, E.; Pietrobon, D.; Plaszczynski, S.; Pointecouteau, E.; Polenta, G.; Pratt, G. W.; Prezeau, G.; Prunet, S.; Puget, J.-L.; Rachen, J. P.; Reach, W. T.; Rebolo, R.; Reinecke, M.; Remazeilles, M.; Renault, C.; Renzi, A.; Ristorcelli, I.; Rocha, G.; Rosset, C.; Rossetti, M.; Roudier, G.; Rozo, E.; Rubino-Martin, J. A.; Rumsey, C.; Rusholme, B.; Rykoff, E. S.; Sandri, M.; Santos, D.; Saunders, R. D. E.; Savelainen, M.; Savini, G.; Schammel, M. P.; Scott, D.; Seiffert, M. D.; Shellard, E. P. S.; Shimwell, T. W.; Spence, R. L. D.; Stanford, S. A.; Stern, D.; Stolyarov, V.; Stompor, R.; Streblyanska, A.; Sudiwala, R.; Sunyaev, R.; Sutton, D.; Suur-Uski, A.-S.; Sygnet, J.-F.; Tauber, J. A.; Terenzi, L.; Toffolatti, L.; Tomasi, M.; Tramonte, D.; Tristram, M.; Tucci, M.; Tuovinen, J.; Umana, G.; Valenziano, L.; Valiviita, J.; van Tent, B.; Vielva, P.; Villa, F.; Wade, L. A.; Wandelt, B. D.; Wehus, I. K.; White, S. D. M.; Wright, E. L.; Yvon, D.; Zacchei, A.; Zonca, A.

2017-01-01

Three pipelines are used to detect SZ clusters: two independent implementations of the Matched Multi-Filter (MMF1 and MMF3), and PowellSnakes (PwS). The main catalogue is constructed as the union of the catalogues from the three detection methods. The completeness and reliability of the catalogues have been assessed through internal and external validation as described in section 4 of the paper. (5 data files).

Documentation for the machine-readable version of a supplement to the Bright Star catalogue (Hoffleit, Saladyga and Wlasuk 1983)

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1984-01-01

Detailed descriptions of the three files of the machine-readable catalog are given. The files of the original tape have been restructured and the data records reformatted to produce a uniform data file having a single logical record per star and homogeneous data fields. The characteristics of the tape version as it is presently being distributed from the Astronomical Data Center are given and the changes to the original tape supplied are described.

Documentation for the machine-readable version of the thirteen color photometry of 1380 bright stars

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.; Roman, N. G.

1981-01-01

The magnetic tape version of the catalogue of thirteen-color photometry of 1380 bright stars, containing data on the 13 color medium narrow band photometric system is described. Observations of essentially all stars brighter than fifth visual magnitude north of delta = -20 deg and brighter than fourth visual magnitude south of delta = -20 deg are included. It is intended to enable users to read and process the tape without the common difficulties and uncertainties.

Galactic Bulge Giants: Probing Stellar and Galactic Evolution. 1. Catalogue of Spitzer IRAC and MIPS Sources (PREPRINT)

DTIC Science & Technology

2010-12-29

1997), the 2 Micron All Sky Survey ( 2MASS ; Skrutskie et al. 2006), the Midcourse Space Experiment (MSX) catalogue, and the Infra- Red Astronomical...made for these sources with a search radius of 3.′′0 with DENIS and 2MASS , and 30.′′0 for identification with an MSX or IRAS counterpart. The... 2MASS and DENIS counterpart (depending on the field, between 3.1% and 6.7% of the sources), or (ii) a DENIS and 2MASS counterpart at a distance

A multicomponent matched filter cluster confirmation tool for eROSITA: initial application to the RASS and DES-SV data sets

NASA Astrophysics Data System (ADS)

Klein, M.; Mohr, J. J.; Desai, S.; Israel, H.; Allam, S.; Benoit-Lévy, A.; Brooks, D.; Buckley-Geer, E.; Carnero Rosell, A.; Carrasco Kind, M.; Cunha, C. E.; da Costa, L. N.; Dietrich, J. P.; Eifler, T. F.; Evrard, A. E.; Frieman, J.; Gruen, D.; Gruendl, R. A.; Gutierrez, G.; Honscheid, K.; James, D. J.; Kuehn, K.; Lima, M.; Maia, M. A. G.; March, M.; Melchior, P.; Menanteau, F.; Miquel, R.; Plazas, A. A.; Reil, K.; Romer, A. K.; Sanchez, E.; Santiago, B.; Scarpine, V.; Schubnell, M.; Sevilla-Noarbe, I.; Smith, M.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Swanson, M. E. C.; Tarle, G.; Collaboration, the DES

2018-03-01

We describe a multicomponent matched filter (MCMF) cluster confirmation tool designed for the study of large X-ray source catalogues produced by the upcoming X-ray all-sky survey mission eROSITA. We apply the method to confirm a sample of 88 clusters with redshifts 0.05 < z < 0.8 in the recently published 2RXS catalogue from the ROSAT All-Sky Survey (RASS) over the 208 deg2 region overlapped by the Dark Energy Survey (DES) Science Verification (DES-SV) data set. In our pilot study, we examine all X-ray sources, regardless of their extent. Our method employs a multicolour red sequence (RS) algorithm that incorporates the X-ray count rate and peak position in determining the region of interest for follow-up and extracts the positionally and colour-weighted optical richness λMCMF as a function of redshift for each source. Peaks in the λMCMF-redshift distribution are identified and used to extract photometric redshifts, richness and uncertainties. The significances of all optical counterparts are characterized using the distribution of richnesses defined along random lines of sight. These significances are used to extract cluster catalogues and to estimate the contamination by random superpositions of unassociated optical systems. The delivered photometric redshift accuracy is δz/(1 + z) = 0.010. We find a well-defined X-ray luminosity-λMCMF relation with an intrinsic scatter of δln (λMCMF|Lx) = 0.21. Matching our catalogue with the DES-SV redMaPPer catalogue yields good agreement in redshift and richness estimates; comparing our catalogue with the South Pole Telescope (SPT) selected clusters shows no inconsistencies. SPT clusters in our data set are consistent with the high-mass extension of the RASS-based λMCMF-mass relation.

Machine-learning identification of galaxies in the WISE × SuperCOSMOS all-sky catalogue

NASA Astrophysics Data System (ADS)

Krakowski, T.; Małek, K.; Bilicki, M.; Pollo, A.; Kurcz, A.; Krupa, M.

2016-11-01

Context. The two currently largest all-sky photometric datasets, WISE and SuperCOSMOS, have been recently cross-matched to construct a novel photometric redshift catalogue on 70% of the sky. Galaxies were separated from stars and quasars through colour cuts, which may leave imperfections because different source types may overlap in colour space. Aims: The aim of the present work is to identify galaxies in the WISE × SuperCOSMOS catalogue through an alternative approach of machine learning. This allows us to define more complex separations in the multi-colour space than is possible with simple colour cuts, and should provide a more reliable source classification. Methods: For the automatised classification we used the support vector machines (SVM) learning algorithm and employed SDSS spectroscopic sources that we cross-matched with WISE × SuperCOSMOS to construct the training and verification set. We performed a number of tests to examine the behaviour of the classifier (completeness, purity, and accuracy) as a function of source apparent magnitude and Galactic latitude. We then applied the classifier to the full-sky data and analysed the resulting catalogue of candidate galaxies. We also compared the resulting dataset with the one obtained through colour cuts. Results: The tests indicate very high accuracy, completeness, and purity (>95%) of the classifier at the bright end; this deteriorates for the faintest sources, but still retains acceptable levels of 85%. No significant variation in the classification quality with Galactic latitude is observed. When we applied the classifier to all-sky WISE × SuperCOSMOS data, we found 15 million galaxies after masking problematic areas. The resulting sample is purer than the one produced by applying colour cuts, at the price of a lower completeness across the sky. Conclusions: The automatic classification is a successful alternative approach to colour cuts for defining a reliable galaxy sample. The identifications we obtained are included in the public release of the WISE × SuperCOSMOS galaxy catalogue. The public release of the WISE × SuperCOSMOS galaxy catalogue is available from http://ssa.roe.ac.uk/WISExSCOS

The Herschel-ATLAS data release 1 - I. Maps, catalogues and number counts

NASA Astrophysics Data System (ADS)

Valiante, E.; Smith, M. W. L.; Eales, S.; Maddox, S. J.; Ibar, E.; Hopwood, R.; Dunne, L.; Cigan, P. J.; Dye, S.; Pascale, E.; Rigby, E. E.; Bourne, N.; Furlanetto, C.; Ivison, R. J.

2016-11-01

We present the first major data release of the largest single key-project in area carried out in open time with the Herschel Space Observatory. The Herschel Astrophysical Terahertz Large Area Survey (H-ATLAS) is a survey of 600 deg2 in five photometric bands - 100, 160, 250, 350 and 500 μm - with the Photoconductor Array Camera and Spectrometer and Spectral and Photometric Imaging Receiver (SPIRE) cameras. In this paper and the companion Paper II, we present the survey of three fields on the celestial equator, covering a total area of 161.6 deg2 and previously observed in the Galaxy and Mass Assembly (GAMA) spectroscopic survey. This paper describes the Herschel images and catalogues of the sources detected on the SPIRE 250 μm images. The 1σ noise for source detection, including both confusion and instrumental noise, is 7.4, 9.4 and 10.2 mJy at 250, 350 and 500 μm. Our catalogue includes 120 230 sources in total, with 113 995, 46 209 and 11 011 sources detected at >4σ at 250, 350 and 500 μm. The catalogue contains detections at >3σ at 100 and 160 μm for 4650 and 5685 sources, and the typical noise at these wavelengths is 44 and 49 mJy. We include estimates of the completeness of the survey and of the effects of flux bias and also describe a novel method for determining the true source counts. The H-ATLAS source counts are very similar to the source counts from the deeper HerMES survey at 250 and 350 μm, with a small difference at 500 μm. Appendix A provides a quick start in using the released data sets, including instructions and cautions on how to use them.

The Hi-GAL compact source catalogue - I. The physical properties of the clumps in the inner Galaxy (-71.0° < ℓ < 67.0°)

NASA Astrophysics Data System (ADS)

Elia, Davide; Molinari, S.; Schisano, E.; Pestalozzi, M.; Pezzuto, S.; Merello, M.; Noriega-Crespo, A.; Moore, T. J. T.; Russeil, D.; Mottram, J. C.; Paladini, R.; Strafella, F.; Benedettini, M.; Bernard, J. P.; Di Giorgio, A.; Eden, D. J.; Fukui, Y.; Plume, R.; Bally, J.; Martin, P. G.; Ragan, S. E.; Jaffa, S. E.; Motte, F.; Olmi, L.; Schneider, N.; Testi, L.; Wyrowski, F.; Zavagno, A.; Calzoletti, L.; Faustini, F.; Natoli, P.; Palmeirim, P.; Piacentini, F.; Piazzo, L.; Pilbratt, G. L.; Polychroni, D.; Baldeschi, A.; Beltrán, M. T.; Billot, N.; Cambrésy, L.; Cesaroni, R.; García-Lario, P.; Hoare, M. G.; Huang, M.; Joncas, G.; Liu, S. J.; Maiolo, B. M. T.; Marsh, K. A.; Maruccia, Y.; Mège, P.; Peretto, N.; Rygl, K. L. J.; Schilke, P.; Thompson, M. A.; Traficante, A.; Umana, G.; Veneziani, M.; Ward-Thompson, D.; Whitworth, A. P.; Arab, H.; Bandieramonte, M.; Becciani, U.; Brescia, M.; Buemi, C.; Bufano, F.; Butora, R.; Cavuoti, S.; Costa, A.; Fiorellino, E.; Hajnal, A.; Hayakawa, T.; Kacsuk, P.; Leto, P.; Li Causi, G.; Marchili, N.; Martinavarro-Armengol, S.; Mercurio, A.; Molinaro, M.; Riccio, G.; Sano, H.; Sciacca, E.; Tachihara, K.; Torii, K.; Trigilio, C.; Vitello, F.; Yamamoto, H.

2017-10-01

Hi-GAL (Herschel InfraRed Galactic Plane Survey) is a large-scale survey of the Galactic plane, performed with Herschel in five infrared continuum bands between 70 and 500 μm. We present a band-merged catalogue of spatially matched sources and their properties derived from fits to the spectral energy distributions (SEDs) and heliocentric distances, based on the photometric catalogues presented in Molinari et al., covering the portion of Galactic plane -71.0° < ℓ < 67.0°. The band-merged catalogue contains 100 922 sources with a regular SED, 24 584 of which show a 70-μm counterpart and are thus considered protostellar, while the remainder are considered starless. Thanks to this huge number of sources, we are able to carry out a preliminary analysis of early stages of star formation, identifying the conditions that characterize different evolutionary phases on a statistically significant basis. We calculate surface densities to investigate the gravitational stability of clumps and their potential to form massive stars. We also explore evolutionary status metrics such as the dust temperature, luminosity and bolometric temperature, finding that these are higher in protostellar sources compared to pre-stellar ones. The surface density of sources follows an increasing trend as they evolve from pre-stellar to protostellar, but then it is found to decrease again in the majority of the most evolved clumps. Finally, we study the physical parameters of sources with respect to Galactic longitude and the association with spiral arms, finding only minor or no differences between the average evolutionary status of sources in the fourth and first Galactic quadrants, or between 'on-arm' and 'interarm' positions.

The Simultaneous Medicina-Planck Experiment: data acquisition, reduction and first results

NASA Astrophysics Data System (ADS)

Procopio, P.; Massardi, M.; Righini, S.; Zanichelli, A.; Ricciardi, S.; Libardi, P.; Burigana, C.; Cuttaia, F.; Mack, K.-H.; Terenzi, L.; Villa, F.; Bonavera, L.; Morgante, G.; Trigilio, C.; Trombetti, T.; Umana, G.

2011-10-01

The Simultaneous Medicina-Planck Experiment (SiMPlE) is aimed at observing a selected sample of 263 extragalactic and Galactic sources with the Medicina 32-m single-dish radio telescope in the same epoch as the Planck satellite observations. The data, acquired with a frequency coverage down to 5 GHz and combined with Planck at frequencies above 30 GHz, will constitute a useful reference catalogue of bright sources over the whole Northern hemisphere. Furthermore, source observations performed in different epochs and comparisons with other catalogues will allow the investigation of source variabilities on different time-scales. In this work, we describe the sample selection, the ongoing data acquisition campaign, the data reduction procedures, the developed tools and the comparison with other data sets. We present 5 and 8.3 GHz data for the SiMPlE Northern sample, consisting of 79 sources with δ≥ 45° selected from our catalogue and observed during the first 6 months of the project. A first analysis of their spectral behaviour and long-term variability is also presented.

VizieR Online Data Catalog: The FIRST Survey Catalog, Version 2014Dec17 (Helfand+ 2015)

NASA Astrophysics Data System (ADS)

Helfand, D. J.; White, R. L.; Becker, R. H.

2015-05-01

The Faint Images of the Radio Sky at Twenty centimeters (FIRST) began in 1993. It uses the VLA (Very Large Array, a facility of the National Radio Observatory (NRAO)) at a frequency of 1.4GHz, and it is slated to 10,000 deg2 of the North and South Galactic Caps, to a sensitivity of about 1mJy with an angular resolution of about 5''. The images produced by an automated mapping pipeline have pixels of 1.8'', a typical rms of 0.15mJy, and a resolution of 5''; the images are available on the Internet (see the FIRST home page at http://sundog.stsci.edu/ for details). The source catalogue is derived from the images. This catalog from the 1993 through 2011 observations contains 946,432 sources from the north and south Galactic caps. It covers a total of 10,575 square degrees of the sky (8444 square degrees in the north and 2131 square degrees in the south). In this version of the catalog, images taken in the the new EVLA configuration have been re-reduced using shallower CLEAN thresholds in order to reduce the "CLEAN bias" in those images. Also, the EVLA images are not co-added with older VLA images to avoid problems resulting from the different frequencies and noise properties of the configurations. That leads to small gaps in the sky coverage at boundaries between the EVLA and VLA regions. As a result, the area covered by this release of the catalog is about 60 square degrees smaller than the earlier release of the catalog (13Jun05, also available here as the "first13.dat" file), and the total number of sources is reduced by nearly 25,000. The previous version of the catalog does have sources in the overlap regions, but their flux densities are considered unreliable due to calibration errors. The flux densities should be more accurate in this catalog, biases are smaller, and the incidence of spurious sources is also reduced. Over most of the survey area, the detection limit is 1 mJy. A region along the equatorial strip (RA=21.3 to 3.3hr, Dec=-1 to 1deg) has a deeper detection threshold because two epochs of observation were combined. The typical detection threshold in this region is 0.75mJy. There are approximately 4,500 sources below the 1mJy threshold used for most previous versions of the catalog. The previous versions http://sundog.stsci.edu/first/catalogs/ (2 data files).

VizieR Online Data Catalog: The Initial Gaia Source List (IGSL) (Smart, 2013)

NASA Astrophysics Data System (ADS)

Smart, R. L.; Nicastro, L.

2013-11-01

The IGSL is a compilation catalog produced for the Gaia mission. We have combined data from the following catalogs or datasets to produce a homogenous list of positons, proper motions, photometry in a blue and red band and estimates of the magnitudes in the Gaia G and G_RVS bands. Included Catalogs: Tycho2, LQRF, UCAC4, SDSS-DR9, PPMXL, GSC23, GEPC, OGLE, Sky2000, 2MASS. Note that in compiling the various entries we did not consider the individual flags. Overall, we think this catalog is reliable but there will be errors, mismatches and duplicates. The user should use this catalog with that in mind, it is fine for statistical studies that has some way to remove obviously incorrect entries but it should only be used with care for individual objects. The source catalogs used to produce the IGSL are: * The Gaia Ecliptic Pole Catalog, version 3.0 (GEPC) Altmann & Bastian 2009, "Ecliptic Poles Catalogue Version 1.1" ESA Document GAIA-C3-TN-ARI-MA-002 URL http://www.rssd.esa.int/llink/livelink/open/2885828 * GSC2.3: GSC2 version 2.3, Lasker et al. 2008AJ....136..735L (I/305) * an excerpt of the 4th version of the Gaia Initial QSO Catalog (GIQC) as compiled by the GWP-S-335-13000, formed by Alexandre H. Andrei, Christophe Barache, Dario N. da Silva Neto, Francois Taris, Geraldine Bourda, Jean-Francois Le Campion, Jean Souchay, J.J. Pereira Osorio, Julio I. Bueno de Camargo, Marcelo Assafin, Roberto Vieira Martins, Sebastien Bouquillon, Sebastien Lambert, Sonia Anton, Patrick Charlot * OGLE: Optical Gravitational Lensing Experiment version III (Szymaski et al., 2011, Cat. J/AcA/61/83) * PPMXL: Positions and Proper Motions "Extra Large" Catalog, Roeser et al. (2010, Cat. I/317) * SDSS: Sloan Digital Sky Survey data release 9, Cat. V/139 * UCAC4: Zacharias et al., 2012, Cat. I/322 * Tycho-2, Hoeg et al., 2000, Cat. I/259 (1 data file).

Documentation for the machine-readable version of the AGK3 Star Catalogue of Positions and Proper Motions North of -2 deg .5 declination (Dieckvoss and Collaborators 1975)

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1984-01-01

A detailed description of the machine-readable astronomical catalog as it is currently being distributed from the Astronomical Data Center is given. Stellar motions and positions are listed herein in tabular form.

Early star catalogues of the southern sky. De Houtman, Kepler (second and third classes), and Halley

NASA Astrophysics Data System (ADS)

Verbunt, F.; van Gent, R. H.

2011-06-01

De Houtman in 1603, Kepler in 1627 and Halley in 1679 published the earliest modern catalogues of the southern sky. We provide machine-readable versions of these catalogues, make some comparisons between them, and briefly discuss their accuracy on the basis of comparison with data from the modern Hipparcos Catalogue. We also compare our results for De Houtman with those by Knobel in 1917 finding good overall agreement. About half of the ~ 200 new stars (with respect to Ptolemaios) added by De Houtman are in twelve new constellations, half in old constellations like Centaurus, Lupus and Argo. The right ascensions and declinations given by De Houtman have error distributions with widths of about 40', the longitudes and latitudes given by Kepler have error distributions with widths of about 45'. Halley improves on this by more than an order of magnitude to widths of about 3', and all entries in his catalogue can be identified. The measurement errors of Halley are due to a systematic deviation of his sextant (increasing with angle to 2' at 60°) and random errors of 0.7 arcmin. The position errors in the catalogue of Halley are dominated by the position errors in the reference stars, which he took from Brahe. The full Tables Houtman, Classis, Aliter and Halley (see Tables 6, 7, 8) are only available at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/530/A93

ExoData: A Python package to handle large exoplanet catalogue data

NASA Astrophysics Data System (ADS)

Varley, Ryan

2016-10-01

Exoplanet science often involves using the system parameters of real exoplanets for tasks such as simulations, fitting routines, and target selection for proposals. Several exoplanet catalogues are already well established but often lack a version history and code friendly interfaces. Software that bridges the barrier between the catalogues and code enables users to improve the specific repeatability of results by facilitating the retrieval of exact system parameters used in articles results along with unifying the equations and software used. As exoplanet science moves towards large data, gone are the days where researchers can recall the current population from memory. An interface able to query the population now becomes invaluable for target selection and population analysis. ExoData is a Python interface and exploratory analysis tool for the Open Exoplanet Catalogue. It allows the loading of exoplanet systems into Python as objects (Planet, Star, Binary, etc.) from which common orbital and system equations can be calculated and measured parameters retrieved. This allows researchers to use tested code of the common equations they require (with units) and provides a large science input catalogue of planets for easy plotting and use in research. Advanced querying of targets is possible using the database and Python programming language. ExoData is also able to parse spectral types and fill in missing parameters according to programmable specifications and equations. Examples of use cases are integration of equations into data reduction pipelines, selecting planets for observing proposals and as an input catalogue to large scale simulation and analysis of planets. ExoData is a Python package available freely on GitHub.

Valorisation of Como Historical Cadastral Maps Through Modern Web Geoservices

NASA Astrophysics Data System (ADS)

Brovelli, M. A.; Minghini, M.; Zamboni, G.

2012-07-01

Cartographic cultural heritage preserved in worldwide archives is often stored in the original paper version only, thus restricting both the chances of utilization and the range of possible users. The Web C.A.R.T.E. system addressed this issue with regard to the precious cadastral maps preserved at the State Archive of Como. Aim of the project was to improve the visibility and accessibility of this heritage using the latest free and open source tools for processing, cataloguing and web publishing the maps. The resulting architecture should therefore assist the State Archive of Como in managing its cartographic contents. After a pre-processing consisting of digitization and georeferencing steps, maps were provided with metadata, compiled according to the current Italian standards and managed through an ad hoc version of the GeoNetwork Opensource geocatalog software. A dedicated MapFish-based webGIS client, with an optimized version also for mobile platforms, was built for maps publication and 2D navigation. A module for 3D visualization of cadastral maps was finally developed using the NASA World Wind Virtual Globe. Thanks to a temporal slidebar, time was also included in the system producing a 4D Graphical User Interface. The overall architecture was totally built with free and open source software and allows a direct and intuitive consultation of historical maps. Besides the notable advantage of keeping original paper maps intact, the system greatly simplifies the work of the State Archive of Como common users and together widens the same range of users thanks to the modernization of map consultation tools.

VizieR Online Data Catalog: Wide binaries in Tycho-Gaia: search method (Andrews+, 2017)

NASA Astrophysics Data System (ADS)

Andrews, J. J.; Chaname, J.; Agueros, M. A.

2017-11-01

Our catalogue of wide binaries identified in the Tycho-Gaia Astrometric Solution catalogue. The Gaia source IDs, Tycho IDs, astrometry, posterior probabilities for both the log-flat prior and power-law prior models, and angular separation are presented. (1 data file).

VizieR Online Data Catalog: NIR proper motion catalogue from UKIDSS-LAS (Smith+, 2014)

NASA Astrophysics Data System (ADS)

Smith, L.; Lucas, P. W.; Burningham, B.; Jones, H. R. A.; Smart, R. L.; Andrei, A. H.; Catalan, S.; Pinfield, D. J.

2015-07-01

We constructed two epoch catalogues for each pointing by matching sources within the pairs of multiframes using the Starlink Tables Infrastructure Library Tool Set (STILTS; Taylor 2006, ASP conf. Ser. 351, 666). We required pairs of sources to be uniquely paired to their closest match within 6-arcsec, and we required the J band magnitudes for the two epochs to agree within 0.5mag, to minimize mismatches. (1 data file).

Processing challenges in the XMM-Newton slew survey

NASA Astrophysics Data System (ADS)

Saxton, Richard D.; Altieri, Bruno; Read, Andrew M.; Freyberg, Michael J.; Esquej, M. P.; Bermejo, Diego

2005-08-01

The great collecting area of the mirrors coupled with the high quantum efficiency of the EPIC detectors have made XMM-Newton the most sensitive X-ray observatory flown to date. This is particularly evident during slew exposures which, while giving only 15 seconds of on-source time, actually constitute a 2-10 keV survey ten times deeper than current "all-sky" catalogues. Here we report on progress towards making a catalogue of slew detections constructed from the full, 0.2-12 keV energy band and discuss the challenges associated with processing the slew data. The fast (90 degrees per hour) slew speed results in images which are smeared, by different amounts depending on the readout mode, effectively changing the form of the point spread function. The extremely low background in slew images changes the optimum source searching criteria such that searching a single image using the full energy band is seen to be more sensitive than splitting the data into discrete energy bands. False detections due to optical loading by bright stars, the wings of the PSF in very bright sources and single-frame detector flashes are considered and techniques for identifying and removing these spurious sources from the final catalogue are outlined. Finally, the attitude reconstruction of the satellite during the slewing maneuver is complex. We discuss the implications of this on the positional accuracy of the catalogue.

Radio emission from dusty galaxies observed by AKARI

NASA Astrophysics Data System (ADS)

Pepiak, A.; Pollo, A.; Takeuchi, T. T.; Solarz, A.; Jurusik, W.

2014-10-01

We probe radio-infrared correlation for two samples of extragalactic sources from the local Universe from the AKARI All-Sky Catalogue. The first, smaller sample (1053 objects) was constructed by the cross-correlation of the AKARI/FIS All-Sky Survey Bright Source Catalogue, the AKARI IRC All-Sky Survey Point Source Catalogue and the NRAO VLA Sky Survey, i.e. it consists of sources detected in the mid- and far-infrared by AKARI, and at the 1.4 GHz radio frequency by NRAO. The second, larger sample (13,324 objects) was constructed by the cross-correlation of only the AKARI/FIS All-Sky Survey Bright Source Catalogue and the NRAO VLA Sky Survey, i.e. it consists of sources detected in the far-infrared and radio, without a condition to be detected in the mid-infrared. Additionally, all objects in both samples were identified as galaxies in the NED and/or SIMBAD databases, and a part of them is known to host active galactic nuclei (AGNs). For the present analysis, we have restricted our samples only to sources with known redshift z. In this paper, we analyse the far-infrared-radio correlation for both of these samples. We compare the ratio of infrared and radio emission from normal star-forming dusty galaxies and AGNs in both samples. For the smaller sample we obtained =2.14 for AGNs and =2.27 for normal galaxies, while for the larger sample =2.15 for AGNs and =2.22 for normal galaxies. An average value of the slope in both samples is ~2.2, which is consistent with the previous measurements from the literature.

FRBCAT: The Fast Radio Burst Catalogue

NASA Astrophysics Data System (ADS)

Petroff, E.; Barr, E. D.; Jameson, A.; Keane, E. F.; Bailes, M.; Kramer, M.; Morello, V.; Tabbara, D.; van Straten, W.

2016-09-01

Here, we present a catalogue of known Fast Radio Burst sources in the form of an online catalogue, FRBCAT. The catalogue includes information about the instrumentation used for the observations for each detected burst, the measured quantities from each observation, and model-dependent quantities derived from observed quantities. To aid in consistent comparisons of burst properties such as width and signal-to-noise ratios, we have re-processed all the bursts for which we have access to the raw data, with software which we make available. The originally derived properties are also listed for comparison. The catalogue is hosted online as a Mysql database which can also be downloaded in tabular or plain text format for off-line use. This database will be maintained for use by the community for studies of the Fast Radio Burst population as it grows.

Catalogue of the Lichenized and Lichenicolous Fungi of Bosnia and Herzegovina

PubMed Central

Bilovitz, Peter O.; Mayrhofer, Helmut

2011-01-01

Summary The catalogue is based on a comprehensive evaluation of 152 published sources. It includes 624 species (with 4 subspecies and 13 varieties) of lichenized and 17 species of lichenicolous Ascomycota, as well as 9 non-lichenized Ascomycota traditionally included in lichenological literature. PMID:22121302

Multithreaded transactions in scientific computing: New versions of a computer program for kinematical calculations of RHEED intensity oscillations

NASA Astrophysics Data System (ADS)

Brzuszek, Marcin; Daniluk, Andrzej

2006-11-01

Writing a concurrent program can be more difficult than writing a sequential program. Programmer needs to think about synchronisation, race conditions and shared variables. Transactions help reduce the inconvenience of using threads. A transaction is an abstraction, which allows programmers to group a sequence of actions on the program into a logical, higher-level computation unit. This paper presents multithreaded versions of the GROWTH program, which allow to calculate the layer coverages during the growth of thin epitaxial films and the corresponding RHEED intensities according to the kinematical approximation. The presented programs also contain graphical user interfaces, which enable displaying program data at run-time. New version program summaryTitles of programs:GROWTHGr, GROWTH06 Catalogue identifier:ADVL_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADVL_v2_0 Program obtainable from:CPC Program Library, Queen's University of Belfast, N. Ireland Catalogue identifier of previous version:ADVL Does the new version supersede the original program:No Computer for which the new version is designed and others on which it has been tested: Pentium-based PC Operating systems or monitors under which the new version has been tested: Windows 9x, XP, NT Programming language used:Object Pascal Memory required to execute with typical data:More than 1 MB Number of bits in a word:64 bits Number of processors used:1 No. of lines in distributed program, including test data, etc.:20 931 Number of bytes in distributed program, including test data, etc.: 1 311 268 Distribution format:tar.gz Nature of physical problem: The programs compute the RHEED intensities during the growth of thin epitaxial structures prepared using the molecular beam epitaxy (MBE). The computations are based on the use of kinematical diffraction theory [P.I. Cohen, G.S. Petrich, P.R. Pukite, G.J. Whaley, A.S. Arrott, Surf. Sci. 216 (1989) 222. [1

On the nature of the SWIFT/INTEGRAL source SWIFT J1508.6-4953 (also PMN J1508-4953)

NASA Astrophysics Data System (ADS)

Landi, R.; Bassani, L.; Masetti, N.; Bazzano, A.; Parisi, P.; Drave, S.; Goossens, M.

2012-06-01

This source is listed in the recent INTEGRAL/IBIS 9-year Galactic Hard X-ray Survey (Krivonos et al. 2012, arXiv:1205.3941) and also appears in the BAT 58-month catalogue (http://heasarc.nasa.gov/docs/swift/results/bs58mon/). It has been associated with the radio source PMN J1508-4953, also reported as a GeV emitter in the 2nd Fermi catalogue (Nolan et al. 2012, ApJS, 199, 31). We use archival Swift/XRT data to investigate its nature.

U.S. data processing for the IRAS project. [by Jet Propulsion Laboratory Scientific Data Analysis System

NASA Technical Reports Server (NTRS)

Duxbury, J. H.

1983-01-01

The JPL's Scientific Data Analysis System (SDAS), which will process IRAS data and produce a catalogue of perhaps a million infrared sources in the sky, as well as other information for astronomical records, is described. The purposes of SDAS are discussed, and the major SDAS processors are shown in block diagram. The catalogue processing is addressed, mentioning the basic processing steps which will be applied to raw detector data. Signal reconstruction and conversion to astrophysical units, source detection, source confirmation, data management, and survey data products are considered in detail.

A lower bound on the number of cosmic ray events required to measure source catalogue correlations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dolci, Marco; Romero-Wolf, Andrew; Wissel, Stephanie, E-mail: marco.dolci@polito.it, E-mail: Andrew.Romero-Wolf@jpl.nasa.gov, E-mail: swissel@calpoly.edu

2016-10-01

Recent analyses of cosmic ray arrival directions have resulted in evidence for a positive correlation with active galactic nuclei positions that has weak significance against an isotropic source distribution. In this paper, we explore the sample size needed to measure a highly statistically significant correlation to a parent source catalogue. We compare several scenarios for the directional scattering of ultra-high energy cosmic rays given our current knowledge of the galactic and intergalactic magnetic fields. We find significant correlations are possible for a sample of >1000 cosmic ray protons with energies above 60 EeV.

STSHV a teleinformatic system for historic seismology in Venezuela

NASA Astrophysics Data System (ADS)

Choy, J. E.; Palme, C.; Altez, R.; Aranguren, R.; Guada, C.; Silva, J.

2013-05-01

From 1997 on, when the first "Jornadas Venezolanas de Sismicidad Historica" took place, a big interest awoke in Venezuela to organize the available information related to historic earthquakes. At that moment only existed one published historic earthquake catalogue, that from Centeno Grau published the first time in 1949. That catalogue had no references about the sources of information. Other catalogues existed but they were internal reports for the petroleum companies and therefore difficult to access. In 2000 Grases et al reedited the Centeno-Grau catalogue, it ended up in a new, very complete catalogue with all the sources well referenced and updated. The next step to organize historic seismicity data was, from 2004 to 2008, the creation of the STSHV (Sistema de teleinformacion de Sismologia Historica Venezolana, http://sismicidad.hacer.ula.ve ). The idea was to bring together all information about destructive historic earthquakes in Venezuela in one place in the internet so it could be accessed easily by a widespread public. There are two ways to access the system. The first one, selecting an earthquake or a list of earthquakes, and the second one, selecting an information source or a list of sources. For each earthquake there is a summary of general information and additional materials: a list with the source parameters published by different authors, a list with intensities assessed by different authors, a list of information sources, a short text summarizing the historic situation at the time of the earthquake and a list of pictures if available. There are searching facilities for the seismic events and dynamic maps can be created. The information sources are classified in: books, handwritten documents, transcription of handwritten documents, documents published in books, journals and congress memories, newspapers, seismologic catalogues and electronic sources. There are facilities to find specific documents or lists of documents with common characteristics. For each document general information is displayed together with an extract of the information relating to the earthquake. If the complete document was available and no problem with the publishers rights a pdf copy of the document was included. We found this system extremely useful for studying historic earthquakes, as one can access immediately previous research works about an earthquake and it allows to check easily the historic information and so to validate the intensity data. So far, the intensity data have not been completed for earthquakes after 2000. This information would be important for improving calibration of intensity - magnitude calibrations of historic events, and is a work in progress. On the other hand, it is important to mention that "El Catálogo Sismológico Venezolano del siglo XX" (The Seismological Venezuelan Catalog), published in 2012, updates seismic information up to 2007, and that the STSHV was one of its primary sources of information.

Imaging different components of a tectonic tremor sequence in southwestern Japan using an automatic statistical detection and location method

NASA Astrophysics Data System (ADS)

Poiata, Natalia; Vilotte, Jean-Pierre; Bernard, Pascal; Satriano, Claudio; Obara, Kazushige

2018-06-01

In this study, we demonstrate the capability of an automatic network-based detection and location method to extract and analyse different components of tectonic tremor activity by analysing a 9-day energetic tectonic tremor sequence occurring at the downdip extension of the subducting slab in southwestern Japan. The applied method exploits the coherency of multiscale, frequency-selective characteristics of non-stationary signals recorded across the seismic network. Use of different characteristic functions, in the signal processing step of the method, allows to extract and locate the sources of short-duration impulsive signal transients associated with low-frequency earthquakes and of longer-duration energy transients during the tectonic tremor sequence. Frequency-dependent characteristic functions, based on higher-order statistics' properties of the seismic signals, are used for the detection and location of low-frequency earthquakes. This allows extracting a more complete (˜6.5 times more events) and time-resolved catalogue of low-frequency earthquakes than the routine catalogue provided by the Japan Meteorological Agency. As such, this catalogue allows resolving the space-time evolution of the low-frequency earthquakes activity in great detail, unravelling spatial and temporal clustering, modulation in response to tide, and different scales of space-time migration patterns. In the second part of the study, the detection and source location of longer-duration signal energy transients within the tectonic tremor sequence is performed using characteristic functions built from smoothed frequency-dependent energy envelopes. This leads to a catalogue of longer-duration energy sources during the tectonic tremor sequence, characterized by their durations and 3-D spatial likelihood maps of the energy-release source regions. The summary 3-D likelihood map for the 9-day tectonic tremor sequence, built from this catalogue, exhibits an along-strike spatial segmentation of the long-duration energy-release regions, matching the large-scale clustering features evidenced from the low-frequency earthquake's activity analysis. Further examination of the two catalogues showed that the extracted short-duration low-frequency earthquakes activity coincides in space, within about 10-15 km distance, with the longer-duration energy sources during the tectonic tremor sequence. This observation provides a potential constraint on the size of the longer-duration energy-radiating source region in relation with the clustering of low-frequency earthquakes activity during the analysed tectonic tremor sequence. We show that advanced statistical network-based methods offer new capabilities for automatic high-resolution detection, location and monitoring of different scale-components of tectonic tremor activity, enriching existing slow earthquakes catalogues. Systematic application of such methods to large continuous data sets will allow imaging the slow transient seismic energy-release activity at higher resolution, and therefore, provide new insights into the underlying multiscale mechanisms of slow earthquakes generation.

Imaging different components of a tectonic tremor sequence in southwestern Japan using an automatic statistical detection and location method

NASA Astrophysics Data System (ADS)

Poiata, Natalia; Vilotte, Jean-Pierre; Bernard, Pascal; Satriano, Claudio; Obara, Kazushige

2018-02-01

In this study, we demonstrate the capability of an automatic network-based detection and location method to extract and analyse different components of tectonic tremor activity by analysing a 9-day energetic tectonic tremor sequence occurring at the down-dip extension of the subducting slab in southwestern Japan. The applied method exploits the coherency of multi-scale, frequency-selective characteristics of non-stationary signals recorded across the seismic network. Use of different characteristic functions, in the signal processing step of the method, allows to extract and locate the sources of short-duration impulsive signal transients associated with low-frequency earthquakes and of longer-duration energy transients during the tectonic tremor sequence. Frequency-dependent characteristic functions, based on higher-order statistics' properties of the seismic signals, are used for the detection and location of low-frequency earthquakes. This allows extracting a more complete (˜6.5 times more events) and time-resolved catalogue of low-frequency earthquakes than the routine catalogue provided by the Japan Meteorological Agency. As such, this catalogue allows resolving the space-time evolution of the low-frequency earthquakes activity in great detail, unravelling spatial and temporal clustering, modulation in response to tide, and different scales of space-time migration patterns. In the second part of the study, the detection and source location of longer-duration signal energy transients within the tectonic tremor sequence is performed using characteristic functions built from smoothed frequency-dependent energy envelopes. This leads to a catalogue of longer-duration energy sources during the tectonic tremor sequence, characterized by their durations and 3-D spatial likelihood maps of the energy-release source regions. The summary 3-D likelihood map for the 9-day tectonic tremor sequence, built from this catalogue, exhibits an along-strike spatial segmentation of the long-duration energy-release regions, matching the large-scale clustering features evidenced from the low-frequency earthquake's activity analysis. Further examination of the two catalogues showed that the extracted short-duration low-frequency earthquakes activity coincides in space, within about 10-15 km distance, with the longer-duration energy sources during the tectonic tremor sequence. This observation provides a potential constraint on the size of the longer-duration energy-radiating source region in relation with the clustering of low-frequency earthquakes activity during the analysed tectonic tremor sequence. We show that advanced statistical network-based methods offer new capabilities for automatic high-resolution detection, location and monitoring of different scale-components of tectonic tremor activity, enriching existing slow earthquakes catalogues. Systematic application of such methods to large continuous data sets will allow imaging the slow transient seismic energy-release activity at higher resolution, and therefore, provide new insights into the underlying multi-scale mechanisms of slow earthquakes generation.

The ASAS-SN Bright Supernova Catalog – II. 2015

DOE PAGES

Holoien, T. W. -S.; Brown, J. S.; Stanek, K. Z.; ...

2017-01-16

Here, this paper presents information for all supernovae discovered by the All-Sky Automated Survey for SuperNovae (ASAS-SN) during 2015, its second full year of operations. The same information is presented for bright (mV ≤ 17), spectroscopically confirmed supernovae discovered by other sources in 2015. As with the first ASAS-SN bright supernova catalogue, we also present redshifts and near-ultraviolet through infrared magnitudes for all supernova host galaxies in both samples. Combined with our previous catalogue, this work comprises a complete catalogue of 455 supernovae from multiple professional and amateur sources, allowing for population studies that were previously impossible. This is themore » second of a series of yearly papers on bright supernovae and their hosts from the ASAS-SN team.« less

The ASAS-SN Bright Supernova Catalog – II. 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holoien, T. W. -S.; Brown, J. S.; Stanek, K. Z.

Here, this paper presents information for all supernovae discovered by the All-Sky Automated Survey for SuperNovae (ASAS-SN) during 2015, its second full year of operations. The same information is presented for bright (mV ≤ 17), spectroscopically confirmed supernovae discovered by other sources in 2015. As with the first ASAS-SN bright supernova catalogue, we also present redshifts and near-ultraviolet through infrared magnitudes for all supernova host galaxies in both samples. Combined with our previous catalogue, this work comprises a complete catalogue of 455 supernovae from multiple professional and amateur sources, allowing for population studies that were previously impossible. This is themore » second of a series of yearly papers on bright supernovae and their hosts from the ASAS-SN team.« less

The Atacama Cosmology Telescope: Dusty Star-Forming Galaxies and Active Galactic Nuclei in the Southern Survey

NASA Technical Reports Server (NTRS)

Marsden, Danica; Gralla, Megan; Marriage, Tobias A.; Switzer, Eric R.; Partridge, Bruce; Massardi, Marcella; Morales, Gustavo; Addison, Graeme; Bond, J. Richard; Crighton, Devin;

The Atacama Cosmology Telescope: Dusty Star-Forming Galaxies and Active Galactic Nuclei in the Southern Survey

NASA Technical Reports Server (NTRS)

Marsden, Danica; Gralla, Megan; Marriage, Tobias A.; Switzer, Eric R.; Partridge, Bruce; Massardi, Marcella; Morales, Gustavo; Addison, Graeme; Bond, J. Richard; Crichton, Devin;

The PMA Catalogue: 420 million positions and absolute proper motions

NASA Astrophysics Data System (ADS)

Akhmetov, V. S.; Fedorov, P. N.; Velichko, A. B.; Shulga, V. M.

2017-07-01

We present a catalogue that contains about 420 million absolute proper motions of stars. It was derived from the combination of positions from Gaia DR1 and 2MASS, with a mean difference of epochs of about 15 yr. Most of the systematic zonal errors inherent in the 2MASS Catalogue were eliminated before deriving the absolute proper motions. The absolute calibration procedure (zero-pointing of the proper motions) was carried out using about 1.6 million positions of extragalactic sources. The mean formal error of the absolute calibration is less than 0.35 mas yr-1. The derived proper motions cover the whole celestial sphere without gaps for a range of stellar magnitudes from 8 to 21 mag. In the sky areas where the extragalactic sources are invisible (the avoidance zone), a dedicated procedure was used that transforms the relative proper motions into absolute ones. The rms error of proper motions depends on stellar magnitude and ranges from 2-5 mas yr-1 for stars with 10 mag < G < 17 mag to 5-10 mas yr-1 for faint ones. The present catalogue contains the Gaia DR1 positions of stars for the J2015 epoch. The system of the PMA proper motions does not depend on the systematic errors of the 2MASS positions, and in the range from 14 to 21 mag represents an independent realization of a quasi-inertial reference frame in the optical and near-infrared wavelength range. The Catalogue also contains stellar magnitudes taken from the Gaia DR1 and 2MASS catalogues. A comparison of the PMA proper motions of stars with similar data from certain recent catalogues has been undertaken.

LOFAR 150-MHz observations of the Boötes field: catalogue and source counts

NASA Astrophysics Data System (ADS)

Williams, W. L.; van Weeren, R. J.; Röttgering, H. J. A.; Best, P.; Dijkema, T. J.; de Gasperin, F.; Hardcastle, M. J.; Heald, G.; Prandoni, I.; Sabater, J.; Shimwell, T. W.; Tasse, C.; van Bemmel, I. M.; Brüggen, M.; Brunetti, G.; Conway, J. E.; Enßlin, T.; Engels, D.; Falcke, H.; Ferrari, C.; Haverkorn, M.; Jackson, N.; Jarvis, M. J.; Kapińska, A. D.; Mahony, E. K.; Miley, G. K.; Morabito, L. K.; Morganti, R.; Orrú, E.; Retana-Montenegro, E.; Sridhar, S. S.; Toribio, M. C.; White, G. J.; Wise, M. W.; Zwart, J. T. L.

2016-08-01

We present the first wide area (19 deg2), deep (≈120-150 μJy beam-1), high-resolution (5.6 × 7.4 arcsec) LOFAR High Band Antenna image of the Boötes field made at 130-169 MHz. This image is at least an order of magnitude deeper and 3-5 times higher in angular resolution than previously achieved for this field at low frequencies. The observations and data reduction, which includes full direction-dependent calibration, are described here. We present a radio source catalogue containing 6 276 sources detected over an area of 19 deg2, with a peak flux density threshold of 5σ. As the first thorough test of the facet calibration strategy, introduced by van Weeren et al., we investigate the flux and positional accuracy of the catalogue. We present differential source counts that reach an order of magnitude deeper in flux density than previously achieved at these low frequencies, and show flattening at 150-MHz flux densities below 10 mJy associated with the rise of the low flux density star-forming galaxies and radio-quiet AGN.

HD-SAO-DM cross index

NASA Technical Reports Server (NTRS)

Nagy, T. A.; Mead, J.

1978-01-01

A table of correspondence SAO-HD-DM-GC was prepared by Morin (1973). The machine-readable version of this cross identification was obtained from the Centre de Donnees Stellaires (Strasbourg, France). The table was sorted at the Goddard Space Flight Center by HD number and all blank HD number records were removed to produce the HD-SAO-DM table presented. There were 258997 entries in the original table; there are 180411 entries after removing the blank HD records. The Boss General Catalogue (GC) numbers were retained on the machine-readable version after the sort.

VizieR Online Data Catalog: Namelists of variable stars Nos.67-73 (Khopolov+, 1985-97)

NASA Astrophysics Data System (ADS)

Kholopov, P. N.; Samus, N. N.; Kazarovets, E. V.; Perova, N. B.

1997-09-01

We present a computer-readable version of six Name-Lists of Variable Stars (Nos.67-72) published in the system introduced during the preparation of the 4th GCVS edition. For printed versions of these Name-Lists see IBVS No.2681,1985; No.3058,1987; No.3323,1989; No.3530,1990; No.3840,1993; No.4140,1995. The main body of the 4th GCVS edition is already available in computer-readable form (see , , ). There are 2735 stars in the Name-Lists Nos.67-72 (file "nl.dat"). The variables are arranged in the order of their names inside constellations. One star of the 67th Name-List (V1810 Cyg=No.67247) turned out to be non-existing, it has been excluded from the table. The identification table (file "ident.dat") and the list of references (file "ref.dat") follow. The total number of designated variable stars has now reached 31193. In the new computer-readable version 1.1 of the GCVS, vol. IV (catalog ), we now present identifications also for name-list stars. We make no special attempt to present the material in a completely homogeneous form. There happened minor style evolution from the 67th to the 70th Name-List: particularly, the 67th Name-List normally refers in the identification table only to the catalogues cited in the papers mentioned in the references in the files "nl.dat" and "ident.dat", and to the 70th Name-List it became a common practice to give more catalogue identifications. From the Name-List No.70, there is no completeness in identifications with the old catalogues of suspected variables (CSV), in many cases we consider the NSV identification sufficient. We also do not try to update the information of the older Name-Lists, we only put the information together and correct known mistakes. The corrections to the Name-Lists have been taken into account. It is necessary to reproduce here two remarks from forewords of the printed Name-Lists: Name-List No.69. In the case of the variable stars in the open cluster NGC 3766 (V843-V849 Cen), there is some ambiguity in their identification with the HD,CoD,CPD catalogues. In particular, we do not agree with the HD catalogue identification of HD 100856 with CPD-60 3102 and consider V843 Cen=CPD-60 3102 to be identical with HDE 306794; HD 100856=CPD-60 3112. Name-List No.70. The 70th Name-List contains a number of variables in Taurus discovered by J. Kelemen [70113]. Unfortunately the discovery announcement contains some mistakes in co-ordinates and in identifications with other lists. These mistakes have been corrected according to [70114]. (Added in version II/195B) The name-list number 73 was added at CDS on 26-Sep-1997. It was kept in a different file because it is differently formatted (better accuracy in the position). The references of this 73rd name list were however merged with the previous ones in the file ref.dat. (5 data files).

VizieR Online Data Catalog: M31 center emission-line point-like sources (Martin+, 2018)

NASA Astrophysics Data System (ADS)

Martin, T. B.; Drissen, L.; Melchior, A.-L.

2017-11-01

We present a catalogue of the point-like sources in the central 11'x11' part of M31 obtained with SITELLE. For each source we report the radial velocity as long as the spectrophotmetric flux of H-alpha, [NII]6584 and the sum of the [SII]6717,6731 doublet. The ID of the sources cross-matched with the catalogues from Merrett et al. (2006MNRAS.369..120M, J/MNRAS/369/120) and Halliday et al. (2006MNRAS.369...97H, J/MNRAS/369/97) are also indicated. We also report the detection of the sources in the images of the Local Group Galaxies Survey (Massey et al., 2006, 2006AJ....131.2478M). (1 data file).

The PMA Catalogue as a realization of the extragalactic reference system in optical and near infrared wavelengths

NASA Astrophysics Data System (ADS)

Akhmetov, Volodymyr S.; Fedorov, Peter N.; Velichko, Anna B.

2018-04-01

We combined the data from the Gaia DR1 and Two-Micron All Sky Survey (2MASS) catalogues in order to derive the absolute proper motions more than 420 million stars distributed all over the sky in the stellar magnitude range 8 mag < G < 21 mag (Gaia magnitude). To eliminate the systematic zonal errors in position of 2MASS catalogue objects, the 2-dimensional median filter was used. The PMA system of proper motion has been obtained by direct link to 1.6 millions extragalactic sources. The short analysis of the absolute proper motion of the PMA stars Catalogue is presented in this work. From a comparison of this data with same stars from the TGAS, UCAC4 and PPMXL catalogues, the equatorial components of the mutual rotation vector of these coordinate systems are determined.

VizieR Online Data Catalog: XXL Survey: First results (Pierre+, 2016)

NASA Astrophysics Data System (ADS)

Pierre, M.; Pacaud, F.; Adami, C.; Alis, S.; Altieri, B.; Baran, B.; Benoist, C.; Birkinshaw, M.; Bongiorno, A.; Bremer, M. N.; Brusa, M.; Butler, A.; Ciliegi, P.; Chiappetti, L.; Clerc, N.; Corasaniti, P. S.; Coupon, J.; De Breuck, C.; Democles, J.; Desai, S.; Delhaize, J.; Devriendt, J.; Dubois, Y.; Eckert, D.; Elyiv, A.; Ettori, S.; Evrard, A.; Faccioli, L.; Farahi, A.; Ferrari, C.; Finet, F.; Fotopoulou, S.; Fourmanoit, N.; Gandhi, P.; Gastaldello, F.; Gastaud, R.; Georgantopoulos, I.; Giles, P.; Guennou, L.; Guglielmo, V.; Horellou, C.; Husband, K.; Huynh, M.; Iovino, A.; Kilbinger, M.; Koulouridis, E.; Lavoie, S.; Le Brun, A. M. C.; Lefevre, J. P.; Lidman, C.; Lieu, M.; Lin, C. A.; Mantz, A.; Maughan, B. J.; Maurogordato, S.; McCarthy, I. G.; McGee, S.; Melin, J. B.; Melnyk, O.; Menanteau, F.; Novak, M.; Paltani, S.; Plionis, M.; Poggianti, B. M.; Pomarede, D.; Pompei, E.; Ponman, T. J.; Ramos-Ceja, M. E.; Ranalli, P.; Rapetti, D.; Raychaudury, S.; Reiprich, T. H.; Rottgering, H.; Rozo, E.; Ryko, E.; Sadibekova, T.; Santos, J.; Sauvageot, J. L.; Schimd, C.; Sereno, M.; Smith, G. P.; Smolcic, V.; Snowden, S.; Spergel, D.; Stanford, S.; Surdej, J.; Valageas, P.; Valotti, A.; Valtchanov, I.; Vignali, C.; Willis, J.; Ziparo, F.

2016-03-01

Paper I. Scientific motivations - XMM-Newton observing plan. Follow-up observations and simulation programme. The table xxlpoint.dat is a list of all XMM survey-type observations (<=AO-10) in the XXL fields, providing the match between the internal naming and the ESA XXM log,the coordinates and useful exposure times of the XMM pointings, their quality and ancillary information. Paper II. The bright cluster sample: catalogue and luminosity function. Paper III. Luminosity-temperature relation of the bright cluster sample. Paper IV. Mass-temperature relation of the bright cluster sample. This article presents the XXL bright cluster sample, a subsample of 100 galaxy clusters selected from the full XXL catalogue by setting a lower limit of 3*10-14erg/cm2/s on the source flux within a 1' aperture. The selection function was estimated using a mixture of Monte Carlo simulations and analytical recipes that closely reproduce the source selection process. An extensive spectroscopic follow-up provided redshifts for 97 of the 100 clusters. We derived accurate X-ray parameters for all the sources. Scaling relations were self-consistently derived from the same sample in other publications of the series. On this basis, we study the number density, luminosity function, and spatial distribution of the sample. The bright cluster sample consists of systems with masses between M500=7*10+14 and 3*10+14Mȯ, mostly located between z=0.1 and 0.5. The observed sky density of clusters is slightly below the predictions from the WMAP9 model, and significantly below the prediction from the Planck 2015 cosmology. In general, within the current uncertainties of the cluster mass calibration, models with higher values of σ8 and/or ΩM appear more difficult to accommodate. We provide tight constraints on the cluster differential luminosity function and find no hint of evolution out to z~1. We also find strong evidence for the presence of large-scale structures in the XXL bright cluster sample and identify five new superclusters. We provide the XXL-100-GC catalogue (xxl100gc.dat), the master catalogue of the 100 brightest galaxy clusters from the XXL Survey. This catalogue summarizes all the information published on this sample by the XXL collaboration, which were initially distributed over several articles. It contains the sources positions, redshifts, fluxes and mass estimates published in Appendix D of paper II, combined with luminosities and temperatures from Table 1 of paper III, as well as gas masses from Table A.1 of paper XIII. Paper VI. The 1000 brightest X-ray point sources. We provide the XXL1000AGN catalogue (xxl1000a.dat), the first catalogue release of the XXL point source catalog, detected in the 2-10keV energy band. The catalogue contains the 1000 brightest sources, at the flux limit of F[2-10 keV]=4.8 10-14erg/s/cm2. We provide derived X-ray spectral parameters, and counterpart properties including four optical magnitudes, photometric and spectroscopic redshift estimates. We also provide the best photometric redshift class based on machine learning classification and the probability for a source to be a star or a photometric redshift outlier. Paper IX. Optical overdensity and radio continuum analysis of a supercluster at z=0.43. The table xxl_vla.dat contains the full source catalogue of all 155 radio sources detected with S/N>=6 in the Very Large Array 3GHz continuum survey of the XXL-North field. The observations covered the 0.7x0.7 square degrees subarea of the 25 square degree XXL-North field. The radio data has an angular resolution of 3.2x1.9 square arcsec and a mean rms of 20uJy per beam. There are 25 resolved sources, of which 8 are multicomponent objects. Paper XI. ATCA 2.1 GHz continuum observations. The table xxl_atca.dat contains the full source catalogue of all 1389 radio sources detected with S/N>=5 in the Australia Telescope Compact Array 2.1GHz continuum pilot survey of the XXL-South field. The observations covered the inner 6.5 square degrees of the 25 square degree XXL-South field. The radio data has an angular resolution of 4.7x4.2 square arcsec and a median rms of 50uJy per beam. There are 305 resolved sources, of which 77 are multicomponent objects. The table contains various observed parameters of the radio sources, such as position, peak flux density and signal-to-noise ratio. Paper XIV. AAOmega redshifts for the southern XXL field. We present a catalogue (xxlaaoz.dat) containing the redshifts of 3660 X-ray selected targets in the XXL southern field. The redshifts were obtained with the AAOmega spectrograph and 2dF fibre positioner on the Anglo-Australian Telescope. The catalogue contains 1515 broad line AGN, 528 stars, and redshifts for 41 out of the 49 brightest X-ray selected clusters in the XXL southern field. Paper XV. Evidence for dry merger driven BCG growth in XXL-100-GC X-ray clusters Given the availability of good quality multiband photometry together with photometric and spectroscopic redshifts to z<1, a simple set of criteria can be used to identify BCGs. For the present work, we define a BCG as: - the brightest galaxy in z-band, - within 0.5xr500 of the cluster X-ray centroid, - with a redshift that is consistent with that of the cluster as determined from all the redshifts available around the X-ray centroid. Our final sample (xxl100bc.dat) consists of 85 clusters, 45 of which are in the Northern field and 40 in the Southern field. (9 data files).

Catalogue of the Lichenized and Lichenicolous Fungi of Montenegro

PubMed Central

Knežević, Branka; Mayrhofer, Helmut

2011-01-01

Summary The catalogue is based on a comprehensive evaluation of 169 published sources. The lichen mycota as currently known from Montenegro includes 681 species (with eight subspecies, nine varieties and one form) of lichenized fungi, 12 species of lichenicolous fungi, and nine non-lichenized fungi traditionally included in lichenological literature. PMID:21423858

VizieR Online Data Catalog: Infrared excesses of Hipparcos stars (McDonald+, 2012)

NASA Astrophysics Data System (ADS)

McDonald, I.; Zijlstra, A. A.; Boyer, M. L.

2013-08-01

The new Hipparcos (Hp)/Tycho (BT, VT) reduction (van Leeuwen 2007. Cat. I/311) was used as the primary astrometric and photometric catalogue, to which the other catalogues were matched. Additional data were sourced from SDSS DR8, DENIS, 2MASS, MSX, AKARI, IRAS and Wide surveys. (1 data file).

[Physiology in the mirror of systematic catalogue of Russian Academy of Sciences Library].

PubMed

Orlov, I V; Lazurkina, V B

2011-07-01

Representation of general human and animal physiology publications in the systematic catalogue of the Library of the Russian Academy of Sciences is considered. The organization of the catalogue as applied to the problems of physiology, built on the basis of library-bibliographic classification used in the Russian universal scientific libraries is described. The card files of the systematic catalogue of the Library contain about 8 million cards. Topics that reflect the problems of general physiology contain 39 headings. For the full range of sciences including physiology the tables of general types of divisions were developed. They have been marked by indexes using lower-case letters of the Russian alphabet. For further detalizations of these indexes decimal symbols are used. The indexes are attached directly to the field of knowledge index. With the current relatively easy availability of network resources value and relevance of any catalogue are reduced. However it concerns much more journal articles, rather than reference books, proceedings of various conferences, bibliographies, personalities, and especially the monographs contained in the systematic catalogue. The card systematic catalogue of the Library remains an important source of information on general physiology issues, as well as its magistral narrower sections.

NASA space geodesy program: Catalogue of site information

NASA Technical Reports Server (NTRS)

Bryant, M. A.; Noll, C. E.

1993-01-01

This is the first edition of the NASA Space Geodesy Program: Catalogue of Site Information. This catalogue supersedes all previous versions of the Crustal Dynamics Project: Catalogue of Site Information, last published in May 1989. This document is prepared under the direction of the Space Geodesy and Altimetry Projects Office (SGAPO), Code 920.1, Goddard Space Flight Center. SGAPO has assumed the responsibilities of the Crustal Dynamics Project, which officially ended December 31, 1991. The catalog contains information on all NASA supported sites as well as sites from cooperating international partners. This catalog is designed to provde descriptions and occupation histories of high-accuracy geodetic measuring sites employing space-related techniques. The emphasis of the catalog has been in the past, and continues to be with this edition, station information for facilities and remote locations utilizing the Satellite Laser Ranging (SLR), Lunar Laser Ranging (LLR), and Very Long Baseline Interferometry (VLBI) techniques. With the proliferation of high-quality Global Positioning System (GPS) receivers and Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS) transponders, many co-located at established SLR and VLBI observatories, the requirement for accurate station and localized survey information for an ever broadening base of scientists and engineers has been recognized. It is our objective to provide accurate station information to scientific groups interested in these facilities.

The Gaia Catalogue Second Data Release and Its Implications to Optical Observations of Man-Made Earth Orbiting Objects

NASA Technical Reports Server (NTRS)

Frith, James M.; Buckalew, Brent A.; Cowardin, Heather M.; Lederer, Susan M.

2018-01-01

The Gaia catalogue second data release and its implications to optical observations of man-made Earth orbiting objects. Abstract and not the Final Paper is attached. The Gaia spacecraft was launched in December 2013 by the European Space Agency to produce a three-dimensional, dynamic map of objects within the Milky Way. Gaia's first year of data was released in September 2016. Common sources from the first data release have been combined with the Tycho-2 catalogue to provide a 5 parameter astrometric solution for approximately 2 million stars. The second Gaia data release is scheduled to come out in April 2018 and is expected to provide astrometry and photometry for more than 1 billion stars, a subset of which with a the full 6 parameter astrometric solution (adding radial velocity) and positional accuracy better than 0.002 arcsec (2 mas). In addition to precise astrometry, a unique opportunity exists with the Gaia catalogue in its production of accurate, broadband photometry using the Gaia G filter. In the past, clear filters have been used by various groups to maximize likelihood of detection of dim man-made objects but these data were very difficult to calibrate. With the second release of the Gaia catalogue, a ground based system utilizing the G band filter will have access to 1.5 billion all-sky calibration sources down to an accuracy of 0.02 magnitudes or better. In this talk, we will discuss the advantages and practicalities of implementing the Gaia filters and catalogue into data pipelines designed for optical observations of man-made objects.

High-redshift radio galaxies and divergence from the CMB dipole

NASA Astrophysics Data System (ADS)

Colin, Jacques; Mohayaee, Roya; Rameez, Mohamed; Sarkar, Subir

2017-10-01

Previous studies have found our velocity in the rest frame of radio galaxies at high redshift to be much larger than that inferred from the dipole anisotropy of the cosmic microwave background. We construct a full sky catalogue, NVSUMSS, by merging the NRAO VLA Sky Survey and the Sydney University Molonglo Sky Survey catalogues and removing local sources by various means including cross-correlating with the 2MASS Redshift Survey catalogue. We take into account both aberration and Doppler boost to deduce our velocity from the hemispheric number count asymmetry, as well as via a three-dimensional linear estimator. Both its magnitude and direction depend on cuts made to the catalogue, e.g. on the lowest source flux; however these effects are small. From the hemispheric number count asymmetry we obtain a velocity of 1729 ± 187 km s-1, I.e. about four times larger than that obtained from the cosmic microwave background dipole, but close in direction, towards RA=149° ± 2°, Dec. = -17° ± 12°. With the three-dimensional estimator, the derived velocity is 1355 ± 174 km s-1 towards RA = 141° ± 11°, Dec. = -9° ± 10°. We assess the statistical significance of these results by comparison with catalogues of random distributions, finding it to be 2.81σ (99.75 per cent confidence).

VizieR Online Data Catalog: X-ATLAS X-ray sources photometric redshifts (Mountrichas+, 2017)

NASA Astrophysics Data System (ADS)

Mountrichas, G.; Corral, A.; Masoura, V. A.; Georgantopoulos, I.; Ruiz, A.; Georgakakis, A.; Carrera, F. J.; Fotopoulou, S.

2017-10-01

The Herschel Terahertz Large Area survey (H-ATLAS) is the largest Open Time Key Project carried out with the Herschel Space Observatory (Eales et al., 2010PASP..122..499E), covering an area of 550 deg2 in five far-infrared and sub-millimeter (submm) bands (100, 160, 250, 350, and 500um). 16 deg2 have been presented in the Science Demonstration Phase (SDP) catalogue (Rigby et al., 2011, Cat. J/MNRAS/415/2336) and lie within one of the regions observed by the Galaxy And Mass Assembly (GAMA) survey (Driver et al. 2011, Cat. J/MNRAS/413/971; Baldry et al. 2010MNRAS.404...86B). XMM-Newton observed 7.1 deg2 with a total exposure time of 336ks (in the MOS1 camera) within the H-ATLAS SDP area, making the XMM-ATLAS one of the largest contiguous areas of the sky with both XMM-Newton and Herschel coverage. The catalogue contains 1816 unique sources (Ranalli et al. 2015, Cat. J/A+A/577/A121). To obtain optical, mid-IR, and far-IR photometry for the XMM-ATLAS sources, we cross-matched the X-ray catalogue with the SDSS-DR13 (Albareti et al., 2015, Cat. J/MNRAS/452/4153), the WISE (Wright et al. 2010AJ....140.1868W, See Cat. II/311 and II/328), and the VISTA-VIKING catalogues (Emerson et al. 2006, Msngr, 126, 41; Dalton et al. 2006, SPIE, 6269, see Cat. II/343/) with the ARCHES cross-correlation tool xmatch, which symmetrically matches an arbitrary number of catalogues providing a Bayesian Probability of association or non-association (Pineau, 2016, eprint arXiv:1609.03457). (1 data file).

TIM, a ray-tracing program for METATOY research and its dissemination

NASA Astrophysics Data System (ADS)

Lambert, Dean; Hamilton, Alasdair C.; Constable, George; Snehanshu, Harsh; Talati, Sharvil; Courtial, Johannes

2012-03-01

TIM (The Interactive METATOY) is a ray-tracing program specifically tailored towards our research in METATOYs, which are optical components that appear to be able to create wave-optically forbidden light-ray fields. For this reason, TIM possesses features not found in other ray-tracing programs. TIM can either be used interactively or by modifying the openly available source code; in both cases, it can easily be run as an applet embedded in a web page. Here we describe the basic structure of TIM's source code and how to extend it, and we give examples of how we have used TIM in our own research. Program summaryProgram title: TIM Catalogue identifier: AEKY_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKY_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License No. of lines in distributed program, including test data, etc.: 124 478 No. of bytes in distributed program, including test data, etc.: 4 120 052 Distribution format: tar.gz Programming language: Java Computer: Any computer capable of running the Java Virtual Machine (JVM) 1.6 Operating system: Any; developed under Mac OS X Version 10.6 RAM: Typically 145 MB (interactive version running under Mac OS X Version 10.6) Classification: 14, 18 External routines: JAMA [1] (source code included) Nature of problem: Visualisation of scenes that include scene objects that create wave-optically forbidden light-ray fields. Solution method: Ray tracing. Unusual features: Specifically designed to visualise wave-optically forbidden light-ray fields; can visualise ray trajectories; can visualise geometric optic transformations; can create anaglyphs (for viewing with coloured "3D glasses") and random-dot autostereograms of the scene; integrable into web pages. Running time: Problem-dependent; typically seconds for a simple scene.

Automated novelty detection in the WISE survey with one-class support vector machines

NASA Astrophysics Data System (ADS)

Solarz, A.; Bilicki, M.; Gromadzki, M.; Pollo, A.; Durkalec, A.; Wypych, M.

2017-10-01

Wide-angle photometric surveys of previously uncharted sky areas or wavelength regimes will always bring in unexpected sources - novelties or even anomalies - whose existence and properties cannot be easily predicted from earlier observations. Such objects can be efficiently located with novelty detection algorithms. Here we present an application of such a method, called one-class support vector machines (OCSVM), to search for anomalous patterns among sources preselected from the mid-infrared AllWISE catalogue covering the whole sky. To create a model of expected data we train the algorithm on a set of objects with spectroscopic identifications from the SDSS DR13 database, present also in AllWISE. The OCSVM method detects as anomalous those sources whose patterns - WISE photometric measurements in this case - are inconsistent with the model. Among the detected anomalies we find artefacts, such as objects with spurious photometry due to blending, but more importantly also real sources of genuine astrophysical interest. Among the latter, OCSVM has identified a sample of heavily reddened AGN/quasar candidates distributed uniformly over the sky and in a large part absent from other WISE-based AGN catalogues. It also allowed us to find a specific group of sources of mixed types, mostly stars and compact galaxies. By combining the semi-supervised OCSVM algorithm with standard classification methods it will be possible to improve the latter by accounting for sources which are not present in the training sample, but are otherwise well-represented in the target set. Anomaly detection adds flexibility to automated source separation procedures and helps verify the reliability and representativeness of the training samples. It should be thus considered as an essential step in supervised classification schemes to ensure completeness and purity of produced catalogues. The catalogues of outlier data are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/606/A39

VizieR Online Data Catalog: KGS EoR0 Catalogue (Carroll+, 2016)

NASA Astrophysics Data System (ADS)

Carroll, P. A.; Line, J.; Morales, M. F.; Barry, N.; Beardsley, A. P.; Hazelton, B. J.; Jacobs, D. C.; Pober, J. C.; Sullivan, I. S.; Webster, R. L.; Bernardi, G.; Bowman, J. D.; Briggs, F.; Cappallo, R. J.; Corey, B. E.; de Oliveira-Costa, A.; Dillon, J. S.; Emrich, D.; Ewall-Wice, A.; Feng, L.; Gaensler, B. M.; Goeke, R.; Greenhill, L. J.; Hewitt, J. N.; Hurley-Walker, N.; Johnston-Hollitt, M.; Kaplan, D. L.; Kasper, J. C.; Kim, Hs.; Kratzenberg, E.; Lenc, E.; Loeb, A.; Lonsdale, C. J.; Lynch, M. J.; McKinley, B.; McWhirter, S. R.; Mitchell, D. A.; Morgan, E.; Neben, A. R.; Oberoi, D.; Offringa, A. R.; Ord, S. M.; Paul, S.; Pindor, B.; Prabu, T.; Procopio, P.; Riding, J.; Rogers, A. E. E.; Roshi, A.; Udaya Shankar, N.; Sethi, S. K.; Srivani, K. S.; Subrahmanyan, R.; Tegmark, M.; Thyagarajan, N.; Tingay, S. J.; Trott, C. M.; Waterson, M.; Wayth, R. B.; Whitney, A. R.; Williams, A.; Williams, C. L.; Wu, C.; Wyithe, J. S. B.

2018-01-01

The MWA EoR0 field is centred at RA=0h and Dec=-27°, and was chosen because it has no bright complex sources in the primary field of view. The FWHM of the antenna beam is approximately 20°, but sources in the edges of the beam and first few side lobes are clearly visible and should be subtracted (Thyagarajan et al., 2015ApJ...804...14T, 2015ApJ...807L..28T; Pober et al., 2016ApJ...819....8P). For this catalogue we concentrate on identifying sources in the primary beam but go out to the 5 per cent power point (nearly first beam null, ~1400deg2). The data for this catalogue include 752min snapshot observations (112s consecutive integrations with 8s gaps) from the night of 2013 August 23. The observations were made at 182MHz with 31MHz bandwidth and cover 2.5h in total. This process for source finding, measurement, and classification has been termed KATALOGSS (KDD Astrometry, Trueness, and Apparent Luminosity of Galaxies in Snapshot Surveys; hereafter abbreviated to KGS). (1 data file).

The Updated IAU MDC Catalogue of Photographic Meteor Orbits

NASA Technical Reports Server (NTRS)

Porubcan, V.; Svoren, J.; Neslusan, L.; Schunova, E.

2011-01-01

The database of photographic meteor orbits of the IAU Meteor Data Center at the Astronomical Institute SAS has gradually been updated. To the 2003 version of 4581 photographic orbits compiled from 17 different stations and obtained in the period 1936-1996, additional new 211 orbits compiled from 7 sources have been added. Thus, the updated version of the catalogue contains 4792 photographic orbits (equinox J2000.0) available either in two separate orbital and geophysical data files or a file with the merged data. All the updated files with relevant documentation are available at the web of the IAU Meteor Data Center. Keywords astronomical databases photographic meteor orbits 1 Introduction Meteoroid orbits are a basic tool for investigation of distribution and spatial structure of the meteoroid population in the close surroundings of the Earth s orbit. However, information about them is usually widely scattered in literature and often in publications with limited circulation. Therefore, the IAU Comm. 22 during the 1976 IAU General Assembly proposed to establish a meteor data center for collection of meteor orbits recorded by photographic and radio techniques. The decision was confirmed by the next IAU GA in 1982 and the data center was established (Lindblad, 1987). The purpose of the data center was to acquire, format, check and disseminate information on precise meteoroid orbits obtained by multi-station techniques and the database gradually extended as documented in previous reports on the activity of the Meteor Data Center by Lindblad (1987, 1995, 1999 and 2001) or Lindblad and Steel (1993). Up to present, the database consists of 4581 photographic meteor orbits (Lindblad et al., 2005), 63.330 radar determined orbit: Harvard Meteor Project (1961-1965, 1968-1969), Adelaide (1960-1961, 1968-1969), Kharkov (1975), Obninsk (1967-1968), Mogadish (1969-1970) and 1425 video-recordings (Lindblad, 1999) to which additional 817 video meteors orbits published by Koten el al. (2003) were

Documentation for the machine-readable version of the general catalogue of 33342 stars for the epoch 1950 (Boss 1937)

NASA Technical Reports Server (NTRS)

Roman, N. G.; Warren, W. H., Jr.

1983-01-01

A revised and corrected version of the machine-readable catalog has been prepared. Cross identifications of the GC stars to the HD and DM catalogs have been replaced by data from the new SAO-HD-GC-DM Cross Index (Roman, Warren and Schofield 1983), including component identifications for multiple SAO entries having identical DM numbers in the SAO Catalog, supplemental Bonner Durchmusterung stars (lower case letter designations) and codes for multiple HD stars. Additional individual corrections have been incorporated based upon errors found during analyses of other catalogs.

ALMACAL IV: A catalogue of ALMA calibrator continuum observations

NASA Astrophysics Data System (ADS)

Bonato, M.; Liuzzo, E.; Giannetti, A.; Massardi, M.; De Zotti, G.; Burkutean, S.; Galluzzi, V.; Negrello, M.; Baronchelli, I.; Brand, J.; Zwaan, M. A.; Rygl, K. L. J.; Marchili, N.; Klitsch, A.; Oteo, I.

2018-05-01

We present a catalogue of ALMA flux density measurements of 754 calibrators observed between August 2012 and September 2017, for a total of 16,263 observations in different bands and epochs. The flux densities were measured reprocessing the ALMA images generated in the framework of the ALMACAL project, with a new code developed by the Italian node of the European ALMA Regional Centre. A search in the online databases yielded redshift measurements for 589 sources (˜78 per cent of the total). Almost all sources are flat-spectrum, based on their low-frequency spectral index, and have properties consistent with being blazars of different types. To illustrate the properties of the sample we show the redshift and flux density distributions as well as the distributions of the number of observations of individual sources and of time spans in the source frame for sources observed in bands 3 (84-116 GHz) and 6 (211-275 GHz). As examples of the scientific investigations allowed by the catalogue we briefly discuss the variability properties of our sources in ALMA bands 3 and 6 and the frequency spectra between the effective frequencies of these bands. We find that the median variability index steadily increases with the source-frame time lag increasing from 100 to 800 days, and that the frequency spectra of BL Lacs are significantly flatter than those of flat-spectrum radio quasars. We also show the global spectral energy distributions of our sources over 17 orders of magnitude in frequency.

The ASTRODEEP Frontier Fields catalogues. I. Multiwavelength photometry of Abell-2744 and MACS-J0416

NASA Astrophysics Data System (ADS)

Merlin, E.; Amorín, R.; Castellano, M.; Fontana, A.; Buitrago, F.; Dunlop, J. S.; Elbaz, D.; Boucaud, A.; Bourne, N.; Boutsia, K.; Brammer, G.; Bruce, V. A.; Capak, P.; Cappelluti, N.; Ciesla, L.; Comastri, A.; Cullen, F.; Derriere, S.; Faber, S. M.; Ferguson, H. C.; Giallongo, E.; Grazian, A.; Lotz, J.; Michałowski, M. J.; Paris, D.; Pentericci, L.; Pilo, S.; Santini, P.; Schreiber, C.; Shu, X.; Wang, T.

2016-05-01

Context. The Frontier Fields survey is a pioneering observational program aimed at collecting photometric data, both from space (Hubble Space Telescope and Spitzer Space Telescope) and from ground-based facilities (VLT Hawk-I), for six deep fields pointing at clusters of galaxies and six nearby deep parallel fields, in a wide range of passbands. The analysis of these data is a natural outcome of the Astrodeep project, an EU collaboration aimed at developing methods and tools for extragalactic photometry and creating valuable public photometric catalogues. Aims: We produce multiwavelength photometric catalogues (from B to 4.5 μm) for the first two of the Frontier Fields, Abell-2744 and MACS-J0416 (plus their parallel fields). Methods: To detect faint sources even in the central regions of the clusters, we develop a robust and repeatable procedure that uses the public codes Galapagos and Galfit to model and remove most of the light contribution from both the brightest cluster members, and the intra-cluster light. We perform the detection on the processed HST H160 image to obtain a pure H-selected sample, which is the primary catalogue that we publish. We also add a sample of sources which are undetected in the H160 image but appear on a stacked infrared image. Photometry on the other HST bands is obtained using SExtractor, again on processed images after the procedure for foreground light removal. Photometry on the Hawk-I and IRAC bands is obtained using our PSF-matching deconfusion code t-phot. A similar procedure, but without the need for the foreground light removal, is adopted for the Parallel fields. Results: The procedure of foreground light subtraction allows for the detection and the photometric measurements of ~2500 sources per field. We deliver and release complete photometric H-detected catalogues, with the addition of the complementary sample of infrared-detected sources. All objects have multiwavelength coverage including B to H HST bands, plus K-band from Hawk-I, and 3.6-4.5 μm from Spitzer. full and detailed treatment of photometric errors is included. We perform basic sanity checks on the reliability of our results. Conclusions: The multiwavelength photometric catalogues are available publicly and are ready to be used for scientific purposes. Our procedures allows for the detection of outshone objects near the bright galaxies, which, coupled with the magnification effect of the clusters, can reveal extremely faint high redshift sources. Full analysis on photometric redshifts is presented in Paper II. The catalogues, together with the final processed images for all HST bands (as well as some diagnostic data and images), are publicly available and can be downloaded from the Astrodeep website at http://www.astrodeep.eu/frontier-fields/ and from a dedicated CDS webpage (http://astrodeep.u-strasbg.fr/ff/index.html). The catalogues are also available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/590/A31

Evaluation of a simple method for the automatic assignment of MeSH descriptors to health resources in a French online catalogue.

PubMed

Névéol, Aurélie; Pereira, Suzanne; Kerdelhué, Gaetan; Dahamna, Badisse; Joubert, Michel; Darmoni, Stéfan J

2007-01-01

The growing number of resources to be indexed in the catalogue of online health resources in French (CISMeF) calls for curating strategies involving automatic indexing tools while maintaining the catalogue's high indexing quality standards. To develop a simple automatic tool that retrieves MeSH descriptors from documents titles. In parallel to research on advanced indexing methods, a bag-of-words tool was developed for timely inclusion in CISMeF's maintenance system. An evaluation was carried out on a corpus of 99 documents. The indexing sets retrieved by the automatic tool were compared to manual indexing based on the title and on the full text of resources. 58% of the major main headings were retrieved by the bag-of-words algorithm and the precision on main heading retrieval was 69%. Bag-of-words indexing has effectively been used on selected resources to be included in CISMeF since August 2006. Meanwhile, on going work aims at improving the current version of the tool.

Integrating ICTs into the Curriculum: Analytical Catalogue of Key Publications. ICTs for Education Catalogue Series, Volume One

ERIC Educational Resources Information Center

Haddad, Caroline, Ed.; Rennie, Luisa, Ed.

2005-01-01

Although many excellent materials now exist that detail the full range of potential uses of Information Communication Technologies (ICTs) in education, already overworked policy makers and others often lack the time it takes to surf the Internet, or access libraries and other sources of information on their own in search of ideas and material…

The Seismotectonic Model of Southern Africa

NASA Astrophysics Data System (ADS)

Midzi, Vunganai; Mulabisana, Thifelimbulu; Manzunzu, Brassnavy

2013-04-01

Presented in this report is a summary of the major structures and seismotectonic zones in Southern Africa (Botswana, Lesotho, Namibia, South Africa and Swaziland), which includes available information on fault plane solutions and stress data. Reports published by several experts contributed much to the prepared zones. The work was prepared as part of the requirements for the SIDA/IGCP Project 601 titled "Seismotectonics and Seismic Hazards in Africa" as well as part of the seismic source characterisation of the GEM-Africa Seismic hazard study. The seismic data used are part of the earthquake catalogue being prepared for the GEM-Africa project, which includes historical and instrumental records as collected from various agencies. Seventeen seismic zones/sources were identified and demarcated using all the available information. Two of the identiied sources are faults with reliable evidence of their activity. Though more faults have been identified in unpublished material as being active, more work is being carried out to obtain information that can be used to characterise them before they are included in the seismotectonic model. Explanations for the selected boundaries of the zones are also given in the report. It should be noted that this information is the first draft of the seismic source zones of the region. Futher interpreation of the data is envisaged which might result in more than one version of the zones.

Probabilistic multi-catalogue positional cross-match

NASA Astrophysics Data System (ADS)

Pineau, F.-X.; Derriere, S.; Motch, C.; Carrera, F. J.; Genova, F.; Michel, L.; Mingo, B.; Mints, A.; Nebot Gómez-Morán, A.; Rosen, S. R.; Ruiz Camuñas, A.

2017-01-01

Context. Catalogue cross-correlation is essential to building large sets of multi-wavelength data, whether it be to study the properties of populations of astrophysical objects or to build reference catalogues (or timeseries) from survey observations. Nevertheless, resorting to automated processes with limited sets of information available on large numbers of sources detected at different epochs with various filters and instruments inevitably leads to spurious associations. We need both statistical criteria to select detections to be merged as unique sources, and statistical indicators helping in achieving compromises between completeness and reliability of selected associations. Aims: We lay the foundations of a statistical framework for multi-catalogue cross-correlation and cross-identification based on explicit simplified catalogue models. A proper identification process should rely on both astrometric and photometric data. Under some conditions, the astrometric part and the photometric part can be processed separately and merged a posteriori to provide a single global probability of identification. The present paper addresses almost exclusively the astrometrical part and specifies the proper probabilities to be merged with photometric likelihoods. Methods: To select matching candidates in n catalogues, we used the Chi (or, indifferently, the Chi-square) test with 2(n-1) degrees of freedom. We thus call this cross-match a χ-match. In order to use Bayes' formula, we considered exhaustive sets of hypotheses based on combinatorial analysis. The volume of the χ-test domain of acceptance - a 2(n-1)-dimensional acceptance ellipsoid - is used to estimate the expected numbers of spurious associations. We derived priors for those numbers using a frequentist approach relying on simple geometrical considerations. Likelihoods are based on standard Rayleigh, χ and Poisson distributions that we normalized over the χ-test acceptance domain. We validated our theoretical results by generating and cross-matching synthetic catalogues. Results: The results we obtain do not depend on the order used to cross-correlate the catalogues. We applied the formalism described in the present paper to build the multi-wavelength catalogues used for the science cases of the Astronomical Resource Cross-matching for High Energy Studies (ARCHES) project. Our cross-matching engine is publicly available through a multi-purpose web interface. In a longer term, we plan to integrate this tool into the CDS XMatch Service.

A 1500 deg2 near infrared proper motion catalogue from the UKIDSS Large Area Survey

NASA Astrophysics Data System (ADS)

Smith, Leigh; Lucas, P. W.; Burningham, B.; Jones, H. R. A.; Smart, R. L.; Andrei, A. H.; Catalán, S.; Pinfield, D. J.

2014-02-01

The United Kingdom Infrared Deep Sky Survey (UKIDSS) Large Area Survey (LAS) began in 2005, with the start of the UKIDSS programme as a 7 year effort to survey roughly 4000 deg2 at high Galactic latitudes in Y, J, H and K bands. The survey also included a significant quantity of two epoch J band observations, with an epoch baseline greater than 2 years to calculate proper motions. We present a near-infrared proper motion catalogue for the 1500 deg2 of the two epoch LAS data, which includes 135 625 stellar sources and a further 88 324 with ambiguous morphological classifications, all with motions detected above the 5σ level. We developed a custom proper motion pipeline which we describe here. Our catalogue agrees well with the proper motion data supplied for a 300 deg2 subset in the current Wide Field Camera Science Archive (WSA) 10th data release (DR10) catalogue, and in various optical catalogues, but it benefits from a larger matching radius and hence a larger upper proper motion detection limit. We provide absolute proper motions, using LAS galaxies for the relative to absolute correction. By using local second-order polynomial transformations, as opposed to linear transformations in the WSA, we correct better for any local distortions in the focal plane, not including the radial distortion that is removed by the UKIDSS pipeline. We present the results of proper motion searches for new brown dwarfs and white dwarfs. We discuss 41 sources in the WSA DR10 overlap with our catalogue with proper motions >300 mas yr-1, several of which are new detections. We present 15 new candidate ultracool dwarf binary systems.

VizieR Online Data Catalog: FON Astrographic Catalogue, Version 3.0 (Andruk+, 2016)

NASA Astrophysics Data System (ADS)

Andruk, V. M.; Pakuliak, L. K.; Golovnia, V. V.; Ivanov, G. O.; Yatsenko, A. I.; Shatokhina, S. V.; Yizhakevych, O. M.

2017-11-01

A catalog of positions and B-magnitudes of 19 million objects (FONAC V3.0) is presented. The catalog is a result of digitizing, image processing, and reduction of 2260 photographic plates of FON observational project from MAO NAS of Ukraine glass archive, which is the part of the UkrVO national project. (94 data files).

A new version of Visual tool for estimating the fractal dimension of images

NASA Astrophysics Data System (ADS)

Grossu, I. V.; Felea, D.; Besliu, C.; Jipa, Al.; Bordeianu, C. C.; Stan, E.; Esanu, T.

2010-04-01

This work presents a new version of a Visual Basic 6.0 application for estimating the fractal dimension of images (Grossu et al., 2009 [1]). The earlier version was limited to bi-dimensional sets of points, stored in bitmap files. The application was extended for working also with comma separated values files and three-dimensional images. New version program summaryProgram title: Fractal Analysis v02 Catalogue identifier: AEEG_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEG_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 9999 No. of bytes in distributed program, including test data, etc.: 4 366 783 Distribution format: tar.gz Programming language: MS Visual Basic 6.0 Computer: PC Operating system: MS Windows 98 or later RAM: 30 M Classification: 14 Catalogue identifier of previous version: AEEG_v1_0 Journal reference of previous version: Comput. Phys. Comm. 180 (2009) 1999 Does the new version supersede the previous version?: Yes Nature of problem: Estimating the fractal dimension of 2D and 3D images. Solution method: Optimized implementation of the box-counting algorithm. Reasons for new version:The previous version was limited to bitmap image files. The new application was extended in order to work with objects stored in comma separated values (csv) files. The main advantages are: Easier integration with other applications (csv is a widely used, simple text file format); Less resources consumed and improved performance (only the information of interest, the "black points", are stored); Higher resolution (the points coordinates are loaded into Visual Basic double variables [2]); Possibility of storing three-dimensional objects (e.g. the 3D Sierpinski gasket). In this version the optimized box-counting algorithm [1] was extended to the three-dimensional case. Summary of revisions:The application interface was changed from SDI (single document interface) to MDI (multi-document interface). One form was added in order to provide a graphical user interface for the new functionalities (fractal analysis of 2D and 3D images stored in csv files). Additional comments: User friendly graphical interface; Easy deployment mechanism. Running time: In the first approximation, the algorithm is linear. References:[1] I.V. Grossu, C. Besliu, M.V. Rusu, Al. Jipa, C.C. Bordeianu, D. Felea, Comput. Phys. Comm. 180 (2009) 1999-2001.[2] F. Balena, Programming Microsoft Visual Basic 6.0, Microsoft Press, US, 1999.

Exploring earthquake databases for the creation of magnitude-homogeneous catalogues: tools for application on a regional and global scale

NASA Astrophysics Data System (ADS)

Weatherill, G. A.; Pagani, M.; Garcia, J.

2016-09-01

The creation of a magnitude-homogenized catalogue is often one of the most fundamental steps in seismic hazard analysis. The process of homogenizing multiple catalogues of earthquakes into a single unified catalogue typically requires careful appraisal of available bulletins, identification of common events within multiple bulletins and the development and application of empirical models to convert from each catalogue's native scale into the required target. The database of the International Seismological Center (ISC) provides the most exhaustive compilation of records from local bulletins, in addition to its reviewed global bulletin. New open-source tools are developed that can utilize this, or any other compiled database, to explore the relations between earthquake solutions provided by different recording networks, and to build and apply empirical models in order to harmonize magnitude scales for the purpose of creating magnitude-homogeneous earthquake catalogues. These tools are described and their application illustrated in two different contexts. The first is a simple application in the Sub-Saharan Africa region where the spatial coverage and magnitude scales for different local recording networks are compared, and their relation to global magnitude scales explored. In the second application the tools are used on a global scale for the purpose of creating an extended magnitude-homogeneous global earthquake catalogue. Several existing high-quality earthquake databases, such as the ISC-GEM and the ISC Reviewed Bulletins, are harmonized into moment magnitude to form a catalogue of more than 562 840 events. This extended catalogue, while not an appropriate substitute for a locally calibrated analysis, can help in studying global patterns in seismicity and hazard, and is therefore released with the accompanying software.

The EVN Galactic Plane Survey - EGaPS

NASA Technical Reports Server (NTRS)

Petrov, Leonid

2011-01-01

I present a catalogue of the positions and correlated flux densities of 109 compact extragalactic radio sources in the Galactic plane determined from an analysis of a 48-h Very Long Baseline Interferometry (VLBI) experiment at 22 GHz with the European VLBI Network. The median position uncertainty is 9 mas. The correlated flux densities of the detected sources are in the range of 2-300 mJy. In addition to the target sources, nine water masers have been detected, of which two are new. I derived the positions of the masers with an accuracy of 30-200 mas and determined the velocities of the maser components and their correlated flux densities. The catalogue and the supporting material are available at http://astrogeo.org/egaps.

Selection biases in empirical p(z) methods for weak lensing

DOE PAGES

Gruen, D.; Brimioulle, F.

2017-02-23

To measure the mass of foreground objects with weak gravitational lensing, one needs to estimate the redshift distribution of lensed background sources. This is commonly done in an empirical fashion, i.e. with a reference sample of galaxies of known spectroscopic redshift, matched to the source population. In this paper, we develop a simple decision tree framework that, under the ideal conditions of a large, purely magnitude-limited reference sample, allows an unbiased recovery of the source redshift probability density function p(z), as a function of magnitude and colour. We use this framework to quantify biases in empirically estimated p(z) caused bymore » selection effects present in realistic reference and weak lensing source catalogues, namely (1) complex selection of reference objects by the targeting strategy and success rate of existing spectroscopic surveys and (2) selection of background sources by the success of object detection and shape measurement at low signal to noise. For intermediate-to-high redshift clusters, and for depths and filter combinations appropriate for ongoing lensing surveys, we find that (1) spectroscopic selection can cause biases above the 10 per cent level, which can be reduced to ≈5 per cent by optimal lensing weighting, while (2) selection effects in the shape catalogue bias mass estimates at or below the 2 per cent level. Finally, this illustrates the importance of completeness of the reference catalogues for empirical redshift estimation.« less

Improved selection criteria for H II regions, based on IRAS sources

NASA Astrophysics Data System (ADS)

Yan, Qing-Zeng; Xu, Ye; Walsh, A. J.; Macquart, J. P.; MacLeod, G. C.; Zhang, Bo; Hancock, P. J.; Chen, Xi; Tang, Zheng-Hong

2018-05-01

We present new criteria for selecting H II regions from the Infrared Astronomical Satellite (IRAS) Point Source Catalogue (PSC), based on an H II region catalogue derived manually from the all-sky Wide-field Infrared Survey Explorer (WISE). The criteria are used to augment the number of H II region candidates in the Milky Way. The criteria are defined by the linear decision boundary of two samples: IRAS point sources associated with known H II regions, which serve as the H II region sample, and IRAS point sources at high Galactic latitudes, which serve as the non-H II region sample. A machine learning classifier, specifically a support vector machine, is used to determine the decision boundary. We investigate all combinations of four IRAS bands and suggest that the optimal criterion is log(F_{60}/F_{12})≥ ( -0.19 × log(F_{100}/F_{25})+ 1.52), with detections at 60 and 100 {μ}m. This selects 3041 H II region candidates from the IRAS PSC. We find that IRAS H II region candidates show evidence of evolution on the two-colour diagram. Merging the WISE H II catalogue with IRAS H II region candidates, we estimate a lower limit of approximately 10 200 for the number of H II regions in the Milky Way.

VizieR Online Data Catalog: ROSAT detected quasars. I. (Brinkmann+ 1997)

NASA Astrophysics Data System (ADS)

Brinkmann, W.; Yuan, W.

1996-09-01

We have compiled a sample of all quasars with measured radio emission from the Veron-Cetty - Veron catalogue (1993, VV93 ) detected by ROSAT in the ALL-SKY SURVEY (RASS, Voges 1992), as targets of pointed observations, or as serendipitous sources from pointed observations as publicly available from the ROSAT point source catalogue (ROSAT-SRC, Voges et al. 1995). The total number of ROSAT detected radio quasars from the above three sources is 654 objects. 69 of the objects are classified as radio-quiet using the defining line at a radio-loudness of 1.0, and 10 objects have no classification. The 5GHz data are from the 87GB radio survey, the NED database, or from the Veron-Cetty - Veron catalogue. The power law indices and their errors are estimated from the two hardness ratios given by the SASS assuming Galactic absorption. The X-ray flux densities in the ROSAT band (0.1-2.4keV) are calculated from the count rates using the energy to counts conversion factor for power law spectra and Galactic absorption. For the photon index we use the value obtained for a individual source if the estimated 1 sigma error is smaller than 0.5, otherwise we use the mean value 2.14. (1 data file).

Deep near-infrared survey of the Southern Sky (DENIS)

NASA Technical Reports Server (NTRS)

Deul, E.

1992-01-01

DENIS (Deep Near-Infrared Survey of the Southern Sky) will be the first complete census of astronomical sources in the near-infrared spectral range. The challenges of this novel survey are both scientific and technical. Phenomena radiating in the near-infrared range from brown dwarfs to galaxies in the early stages of cosmological evolution, the scientific exploitation of data relevant over such a wide range requires pooling expertise from several of the leading European astronomical centers. The technical challenges of a project which will provide an order of magnitude more sources than given by the IRAS space mission, and which will involve advanced data-handling and image-processing techniques, likewise require pooling of hardware and software resources, as well as of human expertise. The DENIS project team is composed of some 40 scientists, computer specialists, and engineers located in 5 European Community countries (France, Germany, Italy, The Netherlands, and Spain), with important contributions from specialists in Australia, Brazil, Chile, and Hungary. DENIS will survey the entire southern sky in 3 colors, namely in the I band at a wavelength of 0.8 micron, in the 1.25 micron J band, and in the 2.15 micron K' band. The sensitivity limits will be 18th magnitude in the I band, 16th in the J band, and 14.5th in the K' band. The angular resolution achieved will be 1 arcsecond in the I band, and 3.0 arcseconds in the J and K' bands. The European Southern Observatory 1 m telescope on La Silla will be dedicated to survey use during operations expected to last four years, commencing in late 1993. DENIS aims to provide the astronomical community with complete digitized infrared images of the full southern sky and a catalogue of extracted objects, both of the best quality and in readily accessible form. This will be achieved through dedicated software packages and specialized catalogues, and with assistance from the Leiden and Paris Data Analysis Centers. The data will be mailed on DAT tapes from La Silla to the two Data Analysis Centers for further processing. Two centers are necessary because of the shear quantity of data and because of the complementary roles the Centers will develop, each exploiting its own particular expertise. The Leiden Data Analysis Center (LDAC) will extract objects, establish their parameters, and archive them into a source catalogue. The LDAC will collaborate with the Groningen Space Research group that has gained experience in infrared image handling from the IRAS satellite. The Paris Data Analysis Center (PDAC) will be responsible for archiving and preprocessing the raw data to provide a homogeneous set of data suitable for further reduction in both the Leiden and Paris data analysis streams. The PDAC will also extract and archive images for the sources flagged by the LDAC as extended, and create a catalogue of galaxies. In exploiting the DENIS data we foresee the collaboration with other data analysis centers, such as the Observatoire de Lyon where the relevant DENIS catalogue of galaxies can be incorporated into their extragalactic database. The Point Sources and the Small Extended Sources catalogues could be incorporated in the Late Type Star database at Montpellier, and in the SIMBAD database as CDS. At Groningen the IRAS Point Source catalogue and/or image data can be merged with the DENIS catalogues. At Meudon algorithms and software will be developed with main goal assessing the limits reachable for the homogeneity and intrinsic consistency between the ensemble of the images in the data base (flat-fielding, relative positioning of the fields, bootstrapped flux calibration) but also for the data analysis.

creation of unificed geoinformation system for monitoring social and economic developments of departamento quindio (colombia) on the basis of the isolated data sources

NASA Astrophysics Data System (ADS)

Buravlev, V.; Sereshnikov, S. V.; Mayorov, A. A.; Vila, J. J.

At each level of the state and municipal management the information resources which provide the support of acceptance of administrative decisions, usually are performed as a number of polytypic, untied among themselves electronic data sources, such as databases, geoinformation projects, electronic archives of documents, etc. These sources are located in the various organizations, they function in various programs, and are actualized according to various rules. Creation on the basis of such isolated sources of the uniform information systems which provide an opportunity to look through and analyze any information stored in these sources in real time mode, will help to promote an increase in a degree of adequacy of accepted administrative decisions. The Distributed Data Service technology - TrisoftDDS, developed by company Trisoft, Ltd, provides the construction of horizontal territorially distributed heterogeneous information systems (TeRGIS). Technology TrisoftDDS allows the quickly creation and support, easy modification of systems, the data sources for which are already existing information complexes, without any working capacity infringements of the last ones, and provides the remote regulated multi-user access to the different types of data sources by the Internet/Intranet. Relational databases, GIS projects, files of various types (documents MS Office, images, html documents, etc.) can be used as data sources in TeRGIS. TeRGIS is created as Internet/Intranet application representing three-level client-server system. Access to the information in existing data sources is carried out by means of the distributed DDS data service, the nucleus of which is the distributed data service server - the DSServer, settling down on an intermediate level. TrisoftDDS Technology includes the following components: Client DSBrowser (Data Service Browser) - the client application connected through the Internet/intranet to the DSServer and provides both - a choice and viewing of documents. Tables of databases, inquiries to databases, inquiries to geoinformation projects, files of various types (documents MS Office, images, html files, etc.) can act as documents. For work with complex data sources the DSBrowser gives an opportunity to create inquiries, to execute data view and filter. Server of the distributed data service - DSServer (Data Service Server) - the web-application that provides the access to the data sources and performance of the client's inquiries on granting of chosen documents. Tool means - Toolkit DDS: the Manager of catalogue - the DCMan (Data Catalog Manager) - - the client-server application intended for the organization and administration of the data catalogue. Documentator - the DSDoc (Data Source Documentor) - the client-server application intended for documenting the procedure of formation of the required document from the data source. The documentation, created by the DBDoc, represents the metadata tables, which are included in the data catalogue with the help of the catalogue manager - the DSCMan. The functioning logic of territorially distributed heterogeneous information system, based on DDS technology, is following: Client application - DSBrowser addresses to the DSServer on specified Internet address. In reply to the reference the DSServer sends the client the catalogue of the system's information resources. The catalogue represents the xml-document which is processed by the client's browser and is deduced as tree - structure in a special window. The user of the application looks through the list and chooses necessary documents, the DSBrowser sends corresponding inquiry to the DSServer. The DSServer, in its turn, addresses to the metadata tables, which describe the document, chosen by user, and broadcasts inquiry to the corresponding data source and after this returns to the client application the result of the inquiry. The catalogue of the data services contains the full Internet address of the document. This allows to create catalogues of the distributed information resources, separate parts of which (documents) can be located on different servers in various places of Internet. Catalogues, thus, can separately settle down at anyone Internet provider, which supports the necessary software. Lists of documents in the catalogue gather in the thematic blocks, allowing to organize user-friendly navigation down the information sources of the system. The TrisoftDDS technology perspectives, first of all, consist of the organization and the functionality of the distributed data service which process inquiries about granting of documents. The distributed data service allows to hide the complex and, in most cases, not necessary features of structure of complex data sources and ways of connection to them from the external user. Instead of this, user receives pseudonyms of connections and file directories, the real parameters of which are stored in the register of the web-server, which hosts the DSServer. Such scheme gives also wide opportunities of the data protection and differentiations of access rights to the information. The technology of creation of horizontal territory distributed geoinformation systems with the purpose of the territorial social and economic development level classification of Quindio Departamento (Columbia) is also given in this work. This technology includes the creation of thematic maps on the base of ESRI software products - Arcview and Erdas. It also shows and offer some ways of regional social and economic development conditions analysis for comparison of optimality of the decision. This technology includes the following parameters: dynamics of demographic processes; education; health and a feed; infrastructure; political and social stability; culture, social and family values; condition of an environment; political and civil institutes; profitableness of the population; unemployment, use of a labour; poverty and not equality. The methodology allows to include other parameters with the help of an expert estimations method and optimization theories and there is also a module for the forecast check by field checks on district.

Catalogue of HI PArameters (CHIPA)

NASA Astrophysics Data System (ADS)

Saponara, J.; Benaglia, P.; Koribalski, B.; Andruchow, I.

2015-08-01

The catalogue of HI parameters of galaxies HI (CHIPA) is the natural continuation of the compilation by M.C. Martin in 1998. CHIPA provides the most important parameters of nearby galaxies derived from observations of the neutral Hydrogen line. The catalogue contains information of 1400 galaxies across the sky and different morphological types. Parameters like the optical diameter of the galaxy, the blue magnitude, the distance, morphological type, HI extension are listed among others. Maps of the HI distribution, velocity and velocity dispersion can also be display for some cases. The main objective of this catalogue is to facilitate the bibliographic queries, through searching in a database accessible from the internet that will be available in 2015 (the website is under construction). The database was built using the open source `` mysql (SQL, Structured Query Language, management system relational database) '', while the website was built with ''HTML (Hypertext Markup Language)'' and ''PHP (Hypertext Preprocessor)''.

VizieR Online Data Catalog: Herschel Multi-tiered Extragalactic Survey (Oliver+, 2012)

NASA Astrophysics Data System (ADS)

Oliver, S. J.; Bock, J.; Altieri, B.; Amblard, A.; Arumugam, V.; Aussel, H.; Babbedge, T.; Beelen, A.; Bethermin, M.; Blain, A.; Boselli, A.; Bridge, C.; Brisbin, D.; Buat, V.; Burgarella, D.; Castro-Rodriguez, N.; Cava, A.; Chanial, P.; Cirasuolo, M.; Clements, D. L.; Conley, A.; Conversi, L.; Cooray, A.; Dowell, C. D.; Dubois, E. N.; Dwek, E.; Dye, S.; Eales, S.; Elbaz, D.; Farrah, D.; Feltre, A.; Ferrero, P.; Fiolet, N.; Fox, M.; Franceschini, A.; Gear, W.; Giovannoli, E.; Glenn, J.; Gong, Y.; Gonzalez Solares, E. A.; Griffin, M.; Halpern, M.; Harwit, M.; Hatziminaoglou, E.; Heinis, S.; Hurley, P.; Hwang, H. S.; Hyde, A.; Ibar, E.; Ilbert, O.; Isaak, K.; Ivison, R. J.; Lagache, G.; Le Floc'h, E.; Levenson, L.; Faro, B. L.; Lu, N.; Madden, S.; Maffei, B.; Magdis, G.; Mainetti, G.; Marchetti, L.; Marsden, G.; Marshall, J.; Mortier, A. M. J.; Nguyen, H. T.; O'Halloran, B.; Omont, A.; Page, M. J.; Panuzzo, P.; Papageorgiou, A.; Patel, H.; Pearson, C. P.; Perez-Fournon, I.; Pohlen, M.; Rawlings, J. I.; Raymond, G.; Rigopoulou, D.; Riguccini, L.; Rizzo, D.; Rodighier!, O. G.; Ros Eboom, I. G.; Rowan-Robinson, M.; Sanchez Portal, M.; Schulz, B.; Scott, D.; Seymour, N.; Shupe, D. L.; Smith, A. J.; Stevens, J. A.; Symeonidis, M.; Trichas, M.; Tugwell, K. E.; Vaccari, M.; Valtchanov, I.; Vieira, J. D.; Viero, M.; Vigroux, L.; Wang, L.; Ward, R.; Wardlow, J.; Wright, G.; Xu, C. K.; Zemcov, M.

2017-03-01

SPIRE maps (250, 350 and 500 microns) and PACS maps (100 and 160 microns) covering an area of more than 385 square degrees in the sky resulting from observations taken as part of HerMES (KPGTsoliver1), a Herschel Key Project whose main objective was to chart the formation and evolution of infrared galaxies throughout cosmic history, measuring the bolometric emission of infrared galaxies and their clustering properties. The associated catalogues extracted from these maps include over 1,200,000 entries representing over 340,000 galaxies. They consist of 'blind extraction' catalogues containing photometric information derived directly from these maps, 'band merged' catalogues extracted at SPIRE 250 micron positions plus 'cross-identification' catalogues based on prior Spitzer MIPS 24 micron source positions. The latest data releases contain also information derived from the complementary Herschel programmes HeLMS (GT2mviero1) and HeRS (OT2mviero2). (4 data files).

VizieR Online Data Catalog: The SDSS Photometric Catalogue, Release 12 (Alam+, 2015)

NASA Astrophysics Data System (ADS)

Alam, S.; et al.

2016-03-01

Data Release 12 (DR12) is the final data release of the SDSS-III, containing all SDSS observations through July 2014. It includes the complete dataset of the BOSS and APOGEE surveys, and also newly includes stellar radial velocity measurements from MARVELS. The principal changes from previous versions are summarized at http://www.sdss.org/dr12/whatsnew/ (1 data file).

Catalogue of Life: 2013 Annual Checklist

USGS Publications Warehouse

Nicolson, David T.; Roskov, Yuri; Kunze, Thomas; Paglinawan, Luvie; Orrell, Thomas; Culham, Alistair; Bailly, Nicolas; Kirk, Paul; Bourgoin, Thierry; Baillargeon, Guy; Hernandez, Franciso; De Wever, Aaike

2013-01-01

The most comprehensive and authoritative global index of species currently available, it consists of a single integrated species checklist and taxonomic hierarchy. It is available (1) as a DVD and booklet; and (2) on the Web. The contact for the booklet and DVD is Thomas Orrell at the Smithsonian Institution, Washington,DC. The URL for the online version is http://www.catalogueoflife.org/annual-checklist/2013/info/ac

Lick Saturn-Voyager reference star catalogue (Klemola, Taraji, and Ocampo 1979): Documentation for the machine-readable version

NASA Technical Reports Server (NTRS)

Warren, Wayne H., Jr.

1990-01-01

The machine readable version of the catalog, as it is currently being distributed from the Astronomical Data Center, is described. The catalog contains accurate equatorial coordinates for 4551 stars in a band of sky against which cameras of the Voyager spacecraft were pointed for observations in the region of Saturn during the flyby. All of the reference stars are in the range 12(exp h) 40(exp m) to 14(exp h) 12(exp m) in right ascension (1950) and +02 to -09 degs in declination. Mean errors of the positions are about 0.25 sec.

The European-Mediterranean Earthquake Catalogue (EMEC) for the last millennium

NASA Astrophysics Data System (ADS)

Grünthal, Gottfried; Wahlström, Rutger

2012-07-01

The catalogue by Grünthal et al. (J Seismol 13:517-541, 2009a) of earthquakes in central, northern, and north-western Europe with M w ≥ 3.5 (CENEC) has been expanded to cover also southern Europe and the Mediterranean area. It has also been extended in time (1000-2006). Due to the strongly increased seismicity in the new area, the threshold for events south of the latitude 44°N has here been set at M w ≥ 4.0, keeping the lower threshold in the northern catalogue part. This part has been updated with data from new and revised national and regional catalogues. The new Euro-Mediterranean Earthquake Catalogue (EMEC) is based on data from some 80 domestic catalogues and data files and over 100 special studies. Available original M w and M 0 data have been introduced. The analysis largely followed the lines of the Grünthal et al. (J Seismol 13:517-541, 2009a) study, i.e., fake and duplicate events were identified and removed, polygons were specified within each of which one or more of the catalogues or data files have validity, and existing magnitudes and intensities were converted to M w. Algorithms to compute M w are based on relations provided locally, or more commonly on those derived by Grünthal et al. (J Seismol 13:517-541, 2009a) or in the present study. The homogeneity of EMEC with respect to M w for the different constituents was investigated and improved where feasible. EMEC contains entries of some 45,000 earthquakes. For each event, the date, time, location (including focal depth if available), intensity I 0 (if given in the original catalogue), magnitude M w (with uncertainty when given), and source (catalogue or special study) are presented. Besides the main EMEC catalogue, large events before year 1000 in the SE part of the investigated area and fake events, respectively, are given in separate lists.

Gaia Data Release 1. Validation of the photometry

NASA Astrophysics Data System (ADS)

Evans, D. W.; Riello, M.; De Angeli, F.; Busso, G.; van Leeuwen, F.; Jordi, C.; Fabricius, C.; Brown, A. G. A.; Carrasco, J. M.; Voss, H.; Weiler, M.; Montegriffo, P.; Cacciari, C.; Burgess, P.; Osborne, P.

2017-04-01

Aims: The photometric validation of the Gaia DR1 release of the ESA Gaia mission is described and the quality of the data shown. Methods: This is carried out via an internal analysis of the photometry using the most constant sources. Comparisons with external photometric catalogues are also made, but are limited by the accuracies and systematics present in these catalogues. An analysis of the quoted errors is also described. Investigations of the calibration coefficients reveal some of the systematic effects that affect the fluxes. Results: The analysis of the constant sources shows that the early-stage photometric calibrations can reach an accuracy as low as 3 mmag.

Galactic Bulge Giants: Probing Stellar and Galactic Evolution. 1. Catalogue of Spitzer IRAC and MIPS Sources (PREPRINT)

NASA Technical Reports Server (NTRS)

Uttenthaler, Stefan; Stute, Matthias; Sahai, Raghvendra; Blommaert, Joris A.; Schultheis, Mathias; Kraemer, Kathleen E.; Groenewegen, Martin A.; Price, Stephan D.

2010-01-01

Aims. We aim at measuring mass-loss rates and the luminosities of a statistically large sample of Galactic bulge stars at several galactocentric radii. The sensitivity of previous infrared surveys of the bulge has been rather limited, thus fundamental questions for late stellar evolution, such as the stage at which substantial mass-loss begins on the red giant branch and its dependence on fundamental stellar properties, remain unanswered. We aim at providing evidence and answers to these questions. Methods. To this end, we observed seven 15 15 arcmin2 fields in the nuclear bulge and its vicinity with unprecedented sensitivity using the IRAC and MIPS imaging instruments on-board the Spitzer Space Telescope. In each of the fields, tens of thousands of point sources were detected. Results. In the first paper based on this data set, we present the observations, data reduction, the final catalogue of sources, and a detailed comparison to previous mid-IR surveys of the Galactic bulge, as well as to theoretical isochrones. We find in general good agreement with other surveys and the isochrones, supporting the high quality of our catalogue.

2WHSP: A multi-frequency selected catalogue of high energy and very high energy γ-ray blazars and blazar candidates

NASA Astrophysics Data System (ADS)

Chang, Y.-L.; Arsioli, B.; Giommi, P.; Padovani, P.

2017-02-01

Aims: High synchrotron peaked blazars (HSPs) dominate the γ-ray sky at energies higher than a few GeV; however, only a few hundred blazars of this type have been cataloged so far. In this paper we present the 2WHSP sample, the largest and most complete list of HSP blazars available to date, which is an expansion of the 1WHSP catalogue of γ-ray source candidates off the Galactic plane. Methods: We cross-matched a number of multi-wavelength surveys (in the radio, infrared and X-ray bands) and applied selection criteria based on the radio to IR and IR to X-ray spectral slopes. To ensure the selection of genuine HSPs, we examined the SED of each candidate and estimated the peak frequency of its synchrotron emission (νpeak) using the ASDC SED tool, including only sources with νpeak > 1015 Hz (equivalent to νpeak > 4 eV). Results: We have assembled the largest and most complete catalogue of HSP blazars to date, which includes 1691 sources. A number of population properties, such as infrared colours, synchrotron peak, redshift distributions, and γ-ray spectral properties have been used to characterise the sample and maximize completeness. We also derived the radio log N-log S distribution. This catalogue has already been used to provide seeds to discover new very high energy objects within Fermi-LAT data and to look for the counterparts of neutrino and ultra high energy cosmic ray sources, showing its potential for the identification of promising high-energy γ-ray sources and multi-messenger targets. Table 4 is only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/598/A17

Probabilistic Seismic Hazard Assessment for Iraq Using Complete Earthquake Catalogue Files

NASA Astrophysics Data System (ADS)

Ameer, A. S.; Sharma, M. L.; Wason, H. R.; Alsinawi, S. A.

2005-05-01

Probabilistic seismic hazard analysis (PSHA) has been carried out for Iraq. The earthquake catalogue used in the present study covers an area between latitude 29° 38.5° N and longitude 39° 50° E containing more than a thousand events for the period 1905 2000. The entire Iraq region has been divided into thirteen seismogenic sources based on their seismic characteristics, geological setting and tectonic framework. The completeness of the seismicity catalogue has been checked using the method proposed by Stepp (1972). The analysis of completeness shows that the earthquake catalogue is not complete below Ms=4.8 for all of Iraq and seismic source zones S1, S4, S5, and S8, while it varies for the other seismic zones. A statistical treatment of completeness of the data file was carried out in each of the magnitude classes. The Frequency Magnitude Distributions (FMD) for the study area including all seismic source zones were established and the minimum magnitude of complete reporting (Mc) were then estimated. For the entire Iraq the Mc was estimated to be about Ms=4.0 while S11 shows the lowest Mc to be about Ms=3.5 and the highest Mc of about Ms=4.2 was observed for S4. The earthquake activity parameters (activity rate λ, b value, maximum regional magnitude mmax) as well as the mean return period (R) with a certain lower magnitude mmin ≥ m along with their probability of occurrence have been determined for all thirteen seismic source zones of Iraq. The maximum regional magnitude mmax was estimated as 7.87 ± 0.86 for entire Iraq. The return period for magnitude 6.0 is largest for source zone S3 which is estimated to be 705 years while the smallest value is estimated as 9.9 years for all of Iraq.

A Catalogue of Massive Young Stellar Objects

NASA Astrophysics Data System (ADS)

Chan, S. J.; Henning, Th.; Schreyer, K.

1994-12-01

We report on an ongoing project to compile a catalogue of massive young stellar objects (YSOs). Massive young stellar objects are compact and luminous infrared sources. The stellar core is still surrounded by optically thick dust shells (cf. Henning 1990, Fundamentals of Cosmic Physics, 14, 321). This catalogue, which contains about 250 objects, will provide comprehensive information such as infrared and radio flux densities, association with maser sources, and outflow phenomena. The objects were selected from the IRAS Point Source Catalogue based on the following criteria: (1) IRAS flux density qualities >= 2 in the 4 IRAS bands (12 microns, 25 microns, 60 microns and 100 microns). (2) Fnu(12microns) <= Fnu(25microns) <= Fnu(60microns) <= F_ν(100microns) Fnu(100microns) >= 1000 Jy (3) IRAS colors (including uncertainty 0.15) should be within the following color box: -0.15 >= R(12/25) >= 1.15, -0.15 >= R(25/60) >= 0.75, -0.35 >= R(60/100) >= 0.35, where R(i/j)=jF_nu (i)/iF_nu (j) (Henning et al. 1990, A&A, 227, 542) (4) IRAS idtype (type of objects)!= 1; objects are not associated with galaxies or late-type stars; ∣b∣ <= 10{(deg}) Our main goal is to collect the observational data of these sources as complete as possible. The flux densities from near-infrared to radio range are assembled (J, H, K bands, IRAS bands, 350 microns, 800 microns and 1.3 mm bands, 2 cm and 6 cm bands). The information on dust features (such as ice, silicate, PAH) comes from the IRAS Low Resolution Spectrometer Atlas and literature (cf. Volk & Cohen, 1989, AJ, 98, 931). The maser sources (H_2O, type I OH, CH_3OH) and NH_3, HCO(+) , and CS molecular line data towards these objects, which have been observed, are also reported. The CO outflow velocity will be given if the object is found to be associated with an outflow.

VizieR Online Data Catalog: 1876 open clusters multimembership catalog (Sampedro+, 2017)

NASA Astrophysics Data System (ADS)

Sampedro, L.; Dias, W. S.; Alfaro, E. J.; Monteiro, H.; Molino, A.

2017-10-01

We use version 3.5 of the New Optically Visible Open Clusters and Candidates catalogue (hereafter DAML02; Dias et al., 2002, Cat. B/ocl), to select a sample of 2167 open clusters to be analysed. The stellar positions and the proper motions are taken from the UCAC4 (Zacharias et al., 2013, Cat. I/322). The catalogue contains data for over 113 million stars (105 million of them with proper-motion data), and is complete down to magnitude R=16. The positional accuracy of the listed objects is about 15-100mas per coordinate, depending on the magnitude. Formal errors in proper motions range from about 1 to 10mas/yr, depending on the magnitude and the observational history. Systematic errors in the proper motions are estimated to be about 1-4mas/yr. (2 data files).

QDENSITY—A Mathematica quantum computer simulation

NASA Astrophysics Data System (ADS)

Juliá-Díaz, Bruno; Burdis, Joseph M.; Tabakin, Frank

2009-03-01

This Mathematica 6.0 package is a simulation of a Quantum Computer. The program provides a modular, instructive approach for generating the basic elements that make up a quantum circuit. The main emphasis is on using the density matrix, although an approach using state vectors is also implemented in the package. The package commands are defined in Qdensity.m which contains the tools needed in quantum circuits, e.g., multiqubit kets, projectors, gates, etc. New version program summaryProgram title: QDENSITY 2.0 Catalogue identifier: ADXH_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADXH_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 26 055 No. of bytes in distributed program, including test data, etc.: 227 540 Distribution format: tar.gz Programming language: Mathematica 6.0 Operating system: Any which supports Mathematica; tested under Microsoft Windows XP, Macintosh OS X, and Linux FC4 Catalogue identifier of previous version: ADXH_v1_0 Journal reference of previous version: Comput. Phys. Comm. 174 (2006) 914 Classification: 4.15 Does the new version supersede the previous version?: Offers an alternative, more up to date, implementation Nature of problem: Analysis and design of quantum circuits, quantum algorithms and quantum clusters. Solution method: A Mathematica package is provided which contains commands to create and analyze quantum circuits. Several Mathematica notebooks containing relevant examples: Teleportation, Shor's Algorithm and Grover's search are explained in detail. A tutorial, Tutorial.nb is also enclosed. Reasons for new version: The package has been updated to make it fully compatible with Mathematica 6.0 Summary of revisions: The package has been updated to make it fully compatible with Mathematica 6.0 Running time: Most examples included in the package, e.g., the tutorial, Shor's examples, Teleportation examples and Grover's search, run in less than a minute on a Pentium 4 processor (2.6 GHz). The running time for a quantum computation depends crucially on the number of qubits employed.

Multithreaded transactions in scientific computing. The Growth06_v2 program

NASA Astrophysics Data System (ADS)

Daniluk, Andrzej

2009-07-01

Writing a concurrent program can be more difficult than writing a sequential program. Programmer needs to think about synchronization, race conditions and shared variables. Transactions help reduce the inconvenience of using threads. A transaction is an abstraction, which allows programmers to group a sequence of actions on the program into a logical, higher-level computation unit. This paper presents a new version of the GROWTHGr and GROWTH06 programs. New version program summaryProgram title: GROWTH06_v2 Catalogue identifier: ADVL_v2_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADVL_v2_1.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 65 255 No. of bytes in distributed program, including test data, etc.: 865 985 Distribution format: tar.gz Programming language: Object Pascal Computer: Pentium-based PC Operating system: Windows 9x, XP, NT, Vista RAM: more than 1 MB Classification: 4.3, 7.2, 6.2, 8, 14 Catalogue identifier of previous version: ADVL_v2_0 Journal reference of previous version: Comput. Phys. Comm. 175 (2006) 678 Does the new version supersede the previous version?: Yes Nature of problem: The programs compute the RHEED intensities during the growth of thin epitaxial structures prepared using the molecular beam epitaxy (MBE). The computations are based on the use of kinematical diffraction theory. Solution method: Epitaxial growth of thin films is modelled by a set of non-linear differential equations [1]. The Runge-Kutta method with adaptive stepsize control was used for solving initial value problem for non-linear differential equations [2]. Reasons for new version: According to the users' suggestions functionality of the program has been improved. Moreover, new use cases have been added which make the handling of the program easier and more efficient than the previous ones [3]. Summary of revisions:The design pattern (See Fig. 2 of Ref. [3]) has been modified according to the scheme shown on Fig. 1. A graphical user interface (GUI) for the program has been reconstructed. Fig. 2 presents a hybrid diagram of a GUI that shows how onscreen objects connect to use cases. The program has been compiled with English/USA regional and language options. Note: The figures mentioned above are contained in the program distribution file. Unusual features: The program is distributed in the form of source project GROWTH06_v2.dpr with associated files, and should be compiled using Borland Delphi compilers versions 6 or latter (including Borland Developer Studio 2006 and Code Gear compilers for Delphi). Additional comments: Two figures are included in the program distribution file. These are captioned Static classes model for Transaction design pattern. A model of a window that shows how onscreen objects connect to use cases. Running time: The typical running time is machine and user-parameters dependent. References: [1] A. Daniluk, Comput. Phys. Comm. 170 (2005) 265. [2] W.H. Press, B.P. Flannery, S.A. Teukolsky, W.T. Vetterling, Numerical Recipes in Pascal: The Art of Scientific Computing, first ed., Cambridge University Press, 1989. [3] M. Brzuszek, A. Daniluk, Comput. Phys. Comm. 175 (2006) 678.

SMMP v. 3.0—Simulating proteins and protein interactions in Python and Fortran

NASA Astrophysics Data System (ADS)

Meinke, Jan H.; Mohanty, Sandipan; Eisenmenger, Frank; Hansmann, Ulrich H. E.

2008-03-01

We describe a revised and updated version of the program package SMMP. SMMP is an open-source FORTRAN package for molecular simulation of proteins within the standard geometry model. It is designed as a simple and inexpensive tool for researchers and students to become familiar with protein simulation techniques. SMMP 3.0 sports a revised API increasing its flexibility, an implementation of the Lund force field, multi-molecule simulations, a parallel implementation of the energy function, Python bindings, and more. Program summaryTitle of program:SMMP Catalogue identifier:ADOJ_v3_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADOJ_v3_0.html Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Licensing provisions:Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html Programming language used:FORTRAN, Python No. of lines in distributed program, including test data, etc.:52 105 No. of bytes in distributed program, including test data, etc.:599 150 Distribution format:tar.gz Computer:Platform independent Operating system:OS independent RAM:2 Mbytes Classification:3 Does the new version supersede the previous version?:Yes Nature of problem:Molecular mechanics computations and Monte Carlo simulation of proteins. Solution method:Utilizes ECEPP2/3, FLEX, and Lund potentials. Includes Monte Carlo simulation algorithms for canonical, as well as for generalized ensembles. Reasons for new version:API changes and increased functionality. Summary of revisions:Added Lund potential; parameters used in subroutines are now passed as arguments; multi-molecule simulations; parallelized energy calculation for ECEPP; Python bindings. Restrictions:The consumed CPU time increases with the size of protein molecule. Running time:Depends on the size of the simulated molecule.

[Competence Based Catalogue of Learning Objectives for Rehabilitation, Physical Medicine, Naturopathic Treatment - Revised Version - Joint Recommendations of the German Society of Rehabilitation Science and the German Society of Physical Medicine and Rehabilitation].

PubMed

Mau, Wilfried; Liebl, Max Emanuel; Deck, Ruth; Lange, Uwe; Smolenski, Ulrich Christian; Walter, Susanne; Gutenbrunner, Christoph

2017-12-01

Since the first publication of learning objectives for the interdisciplinary subject "Rehabilitation, Physical Medicine, Naturopathic Treatment" in undergraduate medical education in 2004 a revision is reasonable due to heterogenous teaching programmes in the faculties and the introduction of the National Competence Based Catalogue of Learning Objectives in Medicine as well as the "Masterplan Medical Education 2020". Therefore the German Society of Rehabilitation Science and the German Society of Physical Medicine and Rehabilitation started a structured consensus process using the DELPHI-method to reduce the learning objectives and arrange them more clearly. Objectives of particular significance are emphasised. All learning objectives are assigned to the cognitive and methodological level 1 or to the action level 2. The learning objectives refer to the less detailed National Competence Based Catalogue of Learning Objectives in Medicine. The revised learning objectives will contribute to further progress in competence based and more homogenous medical teaching in core objectives of Rehabilitation, Physical Medicine, and Naturopathic Treatment in the faculties. © Georg Thieme Verlag KG Stuttgart · New York.

10C survey of radio sources at 15.7 GHz - II. First results

NASA Astrophysics Data System (ADS)

AMI Consortium; Davies, Mathhew L.; Franzen, Thomas M. O.; Waldram, Elizabeth M.; Grainge, Keith J. B.; Hobson, Michael P.; Hurley-Walker, Natasha; Lasenby, Anthony; Olamaie, Malak; Pooley, Guy G.; Riley, Julia M.; Rodríguez-Gonzálvez, Carmen; Saunders, Richard D. E.; Scaife, Anna M. M.; Schammel, Michel P.; Scott, Paul F.; Shimwell, Timothy W.; Titterington, David J.; Zwart, Jonathan T. L.

2011-08-01

In a previous paper (Paper I), the observational, mapping and source-extraction techniques used for the Tenth Cambridge (10C) Survey of Radio Sources were described. Here, the first results from the survey, carried out using the Arcminute Microkelvin Imager Large Array (LA) at an observing frequency of 15.7 GHz, are presented. The survey fields cover an area of ≈27 deg2 to a flux-density completeness of 1 mJy. Results for some deeper areas, covering ≈12 deg2, wholly contained within the total areas and complete to 0.5 mJy, are also presented. The completeness for both areas is estimated to be at least 93 per cent. The 10C survey is the deepest radio survey of any significant extent (≳0.2 deg2) above 1.4 GHz. The 10C source catalogue contains 1897 entries and is available online. The source catalogue has been combined with that of the Ninth Cambridge Survey to calculate the 15.7-GHz source counts. A broken power law is found to provide a good parametrization of the differential count between 0.5 mJy and 1 Jy. The measured source count has been compared with that predicted by de Zotti et al. - the model is found to display good agreement with the data at the highest flux densities. However, over the entire flux-density range of the measured count (0.5 mJy to 1 Jy), the model is found to underpredict the integrated count by ≈30 per cent. Entries from the source catalogue have been matched with those contained in the catalogues of the NRAO VLA Sky Survey and the Faint Images of the Radio Sky at Twenty-cm survey (both of which have observing frequencies of 1.4 GHz). This matching provides evidence for a shift in the typical 1.4-GHz spectral index to 15.7-GHz spectral index of the 15.7-GHz-selected source population with decreasing flux density towards sub-mJy levels - the spectra tend to become less steep. Automated methods for detecting extended sources, developed in Paper I, have been applied to the data; ≈5 per cent of the sources are found to be extended relative to the LA-synthesized beam of ≈30 arcsec. Investigations using higher resolution data showed that most of the genuinely extended sources at 15.7 GHz are classical doubles, although some nearby galaxies and twin-jet sources were also identified.

Program package for multicanonical simulations of U(1) lattice gauge theory-Second version

NASA Astrophysics Data System (ADS)

Bazavov, Alexei; Berg, Bernd A.

2013-03-01

A new version STMCMUCA_V1_1 of our program package is available. It eliminates compatibility problems of our Fortran 77 code, originally developed for the g77 compiler, with Fortran 90 and 95 compilers. New version program summaryProgram title: STMC_U1MUCA_v1_1 Catalogue identifier: AEET_v1_1 Licensing provisions: Standard CPC license, http://cpc.cs.qub.ac.uk/licence/licence.html Programming language: Fortran 77 compatible with Fortran 90 and 95 Computers: Any capable of compiling and executing Fortran code Operating systems: Any capable of compiling and executing Fortran code RAM: 10 MB and up depending on lattice size used No. of lines in distributed program, including test data, etc.: 15059 No. of bytes in distributed program, including test data, etc.: 215733 Keywords: Markov chain Monte Carlo, multicanonical, Wang-Landau recursion, Fortran, lattice gauge theory, U(1) gauge group, phase transitions of continuous systems Classification: 11.5 Catalogue identifier of previous version: AEET_v1_0 Journal Reference of previous version: Computer Physics Communications 180 (2009) 2339-2347 Does the new version supersede the previous version?: Yes Nature of problem: Efficient Markov chain Monte Carlo simulation of U(1) lattice gauge theory (or other continuous systems) close to its phase transition. Measurements and analysis of the action per plaquette, the specific heat, Polyakov loops and their structure factors. Solution method: Multicanonical simulations with an initial Wang-Landau recursion to determine suitable weight factors. Reweighting to physical values using logarithmic coding and calculating jackknife error bars. Reasons for the new version: The previous version was developed for the g77 compiler Fortran 77 version. Compiler errors were encountered with Fortran 90 and Fortran 95 compilers (specified below). Summary of revisions: epsilon=one/10**10 is replaced by epsilon/10.0D10 in the parameter statements of the subroutines u1_bmha.f, u1_mucabmha.f, u1wl_backup.f, u1wlread_backup.f of the folder Libs/U1_par. For the tested compilers script files are added in the folder ExampleRuns and readme.txt files are now provided in all subfolders of ExampleRuns. The gnuplot driver files produced by the routine hist_gnu.f of Libs/Fortran are adapted to syntax required by gnuplot version 4.0 and higher. Restrictions: Due to the use of explicit real*8 initialization the conversion into real*4 will require extra changes besides replacing the implicit.sta file by its real*4 version. Unusual features: The programs have to be compiled the script files like those contained in the folder ExampleRuns as explained in the original paper. Running time: The prepared test runs took up to 74 minutes to execute on a 2 GHz PC.

A SITELLE view of M31's central region - I. Calibrations and radial velocity catalogue of nearly 800 emission-line point-like sources

NASA Astrophysics Data System (ADS)

Martin, Thomas B.; Drissen, Laurent; Melchior, Anne-Laure

2018-01-01

We present a detailed description of the wavelength, astrometric and photometric calibration plan for SITELLE, the imaging Fourier transform spectrometer attached to the Canada-France-Hawaii telescope, based on observations of a red (647-685 nm) data cube of the central region (11 arcmin × 11 arcmin) of M 31. The first application, presented in this paper is a radial-velocity catalogue (with uncertainties of ∼2-6 km s-1) of nearly 800 emission-line point-like sources, including ∼450 new discoveries. Most of the sources are likely planetary nebulae, although we also detect five novae (having erupted in the first eight months of 2016) and one new supernova remnant candidate.

OMCat: Catalogue of Serendipitous Sources Detected with the XMM-Newton Optical Monitor

NASA Technical Reports Server (NTRS)

Kuntz, K. D.; Harrus, Ilana; McGlynn, Thomas A.; Mushotsky, Richard F.; Snowden, Steven L.

2007-01-01

The Optical Monitor Catalogue of serendipitous sources (OMCat) contains entries for every source detected in the publically available XMM-Newton Optical Monitor (OM) images taken in either the imaging or "fast" modes. Since the OM records data simultaneously with the X-ray telescopes on XMM-Newton, it typically produces images in one or more near-UV/optical bands for every pointing of the observatory. As of the beginning of 2006, the public archive had covered roughly 0.5% of the sky in 2950 fields. The OMCat is not dominated by sources previously undetected at other wavelengths; the bulk of objects have optical counterparts. However, the OMCat can be used to extend optical or X-ray spectral energy distributions for known objects into the ultraviolet, to study at higher angular resolution objects detected with GALEX, or to find high-Galactic-latitude objects of interest for UV spectroscopy.

IFLA General Conference, 1989. Division of Bibliographic Control. Open Forum of the Division; Section on Cataloguing; Section on Bibliography; Section on Classification and Indexing. Booklet 40.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

There are 16 papers in this collection from the Division of Bibliographic Control: (1) "Report from the Section on Cataloging" (Tom Delsey); (2) "Section on Bibliography Report" (B. C. Bloomfield); (3) "Report from the Section on Classification and Indexing" (Robert P. Holley); (4) "The Cost of Cataloging" (French and English versions; Genevieve…

Gathering dust: A galaxy-wide study of dust emission from cloud complexes in NGC 300

NASA Astrophysics Data System (ADS)

Riener, M.; Faesi, C. M.; Forbrich, J.; Lada, C. J.

2018-05-01

Aims: We use multi-band observations by the Herschel Space Observatory to study the dust emission properties of the nearby spiral galaxy NGC 300. We compile a first catalogue of the population of giant dust clouds (GDCs) in NGC 300, including temperature and mass estimates, and give an estimate of the total dust mass of the galaxy. Methods: We carried out source detection with the multiwavelength source extraction algorithm getsources. We calculated physical properties, including mass and temperature, of the GDCs from five-band Herschel PACS and SPIRE observations from 100 to 500 μm; the final size and mass estimates are based on the observations at 250 μm that have an effective spatial resolution of 170 pc. We correlated our final catalogue of GDCs to pre-existing catalogues of HII regions to infer the number of GDCs associated with high-mass star formation and determined the Hα emission of the GDCs. Results: Our final catalogue of GDCs includes 146 sources, 90 of which are associated with known HII regions. We find that the dust masses of the GDCs are completely dominated by the cold dust component and range from 1.1 × 103 to 1.4 × 104 M⊙. The GDCs have effective temperatures of 13-23 K and show a distinct cold dust effective temperature gradient from the centre towards the outer parts of the stellar disk. We find that the population of GDCs in our catalogue constitutes 16% of the total dust mass of NGC 300, which we estimate to be about 5.4 × 106 M⊙. At least about 87% of our GDCs have a high enough average dust mass surface density to provide sufficient shielding to harbour molecular clouds. We compare our results to previous pointed molecular gas observations in NGC 300 and results from other nearby galaxies and also conclude that it is very likely that most of our GDCs are associated with complexes of giant molecular clouds. The catalogue is only available at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/612/A81Herschel is an ESA space observatory with science instruments provided by European-led Principal Investigator consortia and with important participation from NASA.

Hi-GAL, the Herschel infrared Galactic Plane Survey: photometric maps and compact source catalogues. First data release for the inner Milky Way: +68° ≥ l ≥ -70°

NASA Astrophysics Data System (ADS)

Molinari, S.; Schisano, E.; Elia, D.; Pestalozzi, M.; Traficante, A.; Pezzuto, S.; Swinyard, B. M.; Noriega-Crespo, A.; Bally, J.; Moore, T. J. T.; Plume, R.; Zavagno, A.; di Giorgio, A. M.; Liu, S. J.; Pilbratt, G. L.; Mottram, J. C.; Russeil, D.; Piazzo, L.; Veneziani, M.; Benedettini, M.; Calzoletti, L.; Faustini, F.; Natoli, P.; Piacentini, F.; Merello, M.; Palmese, A.; Del Grande, R.; Polychroni, D.; Rygl, K. L. J.; Polenta, G.; Barlow, M. J.; Bernard, J.-P.; Martin, P. G.; Testi, L.; Ali, B.; André, P.; Beltrán, M. T.; Billot, N.; Carey, S.; Cesaroni, R.; Compiègne, M.; Eden, D.; Fukui, Y.; Garcia-Lario, P.; Hoare, M. G.; Huang, M.; Joncas, G.; Lim, T. L.; Lord, S. D.; Martinavarro-Armengol, S.; Motte, F.; Paladini, R.; Paradis, D.; Peretto, N.; Robitaille, T.; Schilke, P.; Schneider, N.; Schulz, B.; Sibthorpe, B.; Strafella, F.; Thompson, M. A.; Umana, G.; Ward-Thompson, D.; Wyrowski, F.

2016-07-01

Aims: We present the first public release of high-quality data products (DR1) from Hi-GAL, the Herschel infrared Galactic Plane Survey. Hi-GAL is the keystone of a suite of continuum Galactic plane surveys from the near-IR to the radio and covers five wavebands at 70, 160, 250, 350 and 500 μm, encompassing the peak of the spectral energy distribution of cold dust for 8 ≲ T ≲ 50 K. This first Hi-GAL data release covers the inner Milky Way in the longitude range 68° ≳ ℓ ≳ -70° in a | b | ≤ 1° latitude strip. Methods: Photometric maps have been produced with the ROMAGAL pipeline, which optimally capitalizes on the excellent sensitivity and stability of the bolometer arrays of the Herschel PACS and SPIRE photometric cameras. It delivers images of exquisite quality and dynamical range, absolutely calibrated with Planck and IRAS, and recovers extended emission at all wavelengths and all spatial scales, from the point-spread function to the size of an entire 2°× 2° "tile" that is the unit observing block of the survey. The compact source catalogues were generated with the CuTEx algorithm, which was specifically developed to optimise source detection and extraction in the extreme conditions of intense and spatially varying background that are found in the Galactic plane in the thermal infrared. Results: Hi-GAL DR1 images are cirrus noise limited and reach the 1σ-rms predicted by the Herschel Time Estimators for parallel-mode observations at 60'' s-1 scanning speed in relatively low cirrus emission regions. Hi-GAL DR1 images will be accessible through a dedicated web-based image cutout service. The DR1 Compact Source Catalogues are delivered as single-band photometric lists containing, in addition to source position, peak, and integrated flux and source sizes, a variety of parameters useful to assess the quality and reliability of the extracted sources. Caveats and hints to help in this assessment are provided. Flux completeness limits in all bands are determined from extensive synthetic source experiments and greatly depend on the specific line of sight along the Galactic plane because the background strongly varies as a function of Galactic longitude. Hi-GAL DR1 catalogues contain 123210, 308509, 280685, 160972, and 85460 compact sources in the five bands. Herschel is an ESA space observatory with science instruments provided by European-led Principal Investigator consortia and with important participation from NASA.The images and the catalogues are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/591/A149

A catalogue of chromospherically active binary stars (third edition)

NASA Astrophysics Data System (ADS)

Eker, Z.; Ak, N. Filiz; Bilir, S.; Doǧru, D.; Tüysüz, M.; Soydugan, E.; Bakış, H.; Uǧraş, B.; Soydugan, F.; Erdem, A.; Demircan, O.

2008-10-01

The catalogue of chromospherically active binaries (CABs) has been revised and updated. With 203 new identifications, the number of CAB stars is increased to 409. The catalogue is available in electronic format where each system has a number of lines (suborders) with a unique order number. The columns contain data of limited numbers of selected cross references, comments to explain peculiarities and the position of the binarity in case it belongs to a multiple system, classical identifications (RS Canum Venaticorum, BY Draconis), brightness and colours, photometric and spectroscopic data, a description of emission features (CaII H and K, Hα, ultraviolet, infrared), X-ray luminosity, radio flux, physical quantities and orbital information, where each basic entry is referenced so users can go to the original sources.

CVcat: An interactive database on cataclysmic variables

NASA Astrophysics Data System (ADS)

Kube, J.; Gänsicke, B. T.; Euchner, F.; Hoffmann, B.

2003-06-01

CVcat is a database that contains published data on cataclysmic variables and related objects. Unlike in the existing online sources, the users are allowed to add data to the catalogue. The concept of an ``open catalogue'' approach is reviewed together with the experience from one year of public usage of CVcat. New concepts to be included in the upcoming AstroCat framework and the next CVcat implementation are presented. CVcat can be found at http://www.cvcat.org.

Lick Jupiter-Voyager reference star catalogue (Klemola, Morabito, and Taraji 1978): Documentation for the machine-readable version

NASA Technical Reports Server (NTRS)

Warren, Wayne H., Jr.

1990-01-01

The machine-readable version of the catalog, as it is currently being distributed from the Astronomical Data Center, is described. The catalog contains accurate equatorial coordinates for 4983 stars in a band of sky against which cameras of the Voyager spacecraft were pointed for observations in the region of Jupiter during the flyby. All of the reference stars are in the range 6 hr 00 min to 8 hr 04 min in right ascension (1950), declination zones +16 to +23 degrees, and 8 hr to 31 min to 8 hr 57 min, zones +08 to +14 degrees. Mean errors of the positions are about 0.4 sec.

Catalogue of Risks: Natural, Technical, Social and Health Risks

NASA Astrophysics Data System (ADS)

Ebi, Kristie L.

2009-01-01

Financial, geophysical, and terrorist-related disasters have been headline news in the past few months. As amply demonstrated on a regular basis, the recognition and evaluation of risks are skills that could be more widespread. As such, Proske's Catalogue of Risks is timely and of potential interest. The book is a revised and expanded version of an earlier German publication that aims to provide an encyclopedic discussion of issues related to risks and disasters, with a goal of facilitating an understanding of the components and assessment of risk. The book includes chapters that discuss the difficulty of coming to a consensus on a definition of risk, a comprehensive range of risks and disasters, objective risk measures, subjective risk judgment, quality of life measures, and legal aspects of risk. The book ends with an example of applying the concepts discussed to ship impacts against bridges.

Fifth Fundamental Catalogue (FK5). Part 1: Basic fundamental stars (Fricke, Schwan, and Lederle 1988): Documentation for the machine-readable version

NASA Technical Reports Server (NTRS)

Warren, Wayne H., Jr.

1990-01-01

The machine-readable version of the catalog, as it is currently being distributed from the Astronomical Data Center, is described. The Basic FK5 provides improved mean positions and proper motions for the 1535 classical fundamental stars that had been included in the FK3 and FK4 catalogs. The machine version of the catalog contains the positions and proper motions of the Basic FK5 stars for the epochs and equinoxes J2000.0 and B1950.0, the mean epochs of individual observed right ascensions and declinations used to determine the final positions, and the mean errors of the final positions and proper motions for the reported epochs. The cross identifications to other designations used for the FK5 stars that are given in the published catalog were not included in the original machine versions, but the Durchmusterung numbers have been added at the Astronomical Data Center.

Optical Identifications of High-Redshift Galaxy Clusters from the Planck Sunyaev-Zeldovich Survey

NASA Astrophysics Data System (ADS)

Burenin, R. A.; Bikmaev, I. F.; Khamitov, I. M.; Zaznobin, I. A.; Khorunzhev, G. A.; Eselevich, M. V.; Afanasiev, V. L.; Dodonov, S. N.; Rubiño-Martín, J.-A.; Aghanim, N.; Sunyaev, R. A.

2018-05-01

We present the results of optical identifications and spectroscopic redshift measurements for galaxy clusters from the second Planck catalogue of Sunyaev-Zeldovich sources (PSZ2) located at high redshifts, z ≈ 0.7-0.9. We used the data of optical observations with the Russian-Turkish 1.5-mtelescope (RTT-150), the Sayan Observatory 1.6-m telescope, the Calar Alto 3.5-m telescope, and the 6-m SAO RAS telescope (BTA). The spectroscopic redshift measurements were obtained for seven galaxy clusters, including one cluster, PSZ2 G126.57+51.61, from the cosmological sample of the PSZ2 catalogue. In the central regions of two clusters, PSZ2 G069.39+68.05 and PSZ2 G087.39-34.58, we detected arcs of strong gravitational lensing of background galaxies, one of which is at redshift z = 4.262. The data presented below roughly double the number of known galaxy clusters in the second Planck catalogue of Sunyaev-Zeldovich sources at high redshifts, z ≈ 0.8.

A method for detecting and locating geophysical events using groups of arrays

NASA Astrophysics Data System (ADS)

de Groot-Hedlin, Catherine D.; Hedlin, Michael A. H.

2015-11-01

We have developed a novel method to detect and locate geophysical events that makes use of any sufficiently dense sensor network. This method is demonstrated using acoustic sensor data collected in 2013 at the USArray Transportable Array (TA). The algorithm applies Delaunay triangulation to divide the sensor network into a mesh of three-element arrays, called triads. Because infrasound waveforms are incoherent between the sensors within each triad, the data are transformed into envelopes, which are cross-correlated to find signals that satisfy a consistency criterion. The propagation azimuth, phase velocity and signal arrival time are computed for each signal. Triads with signals that are consistent with a single source are bundled as an event group. The ensemble of arrival times and azimuths of detected signals within each group are used to locate a common source in space and time. A total of 513 infrasonic stations that were active for part or all of 2013 were divided into over 2000 triads. Low (0.5-2 Hz) and high (2-8 Hz) catalogues of infrasonic events were created for the eastern USA. The low-frequency catalogue includes over 900 events and reveals several highly active source areas on land that correspond with coal mining regions. The high-frequency catalogue includes over 2000 events, with most occurring offshore. Although their cause is not certain, most events are clearly anthropogenic as almost all occur during regular working hours each week. The regions to which the TA is most sensitive vary seasonally, with the direction of reception dependent on the direction of zonal winds. The catalogue has also revealed large acoustic events that may provide useful insight into the nature of long-range infrasound propagation in the atmosphere.

New version of PLNoise: a package for exact numerical simulation of power-law noises

NASA Astrophysics Data System (ADS)

Milotti, Edoardo

2007-08-01

In a recent paper I have introduced a package for the exact simulation of power-law noises and other colored noises [E. Milotti, Comput. Phys. Comm. 175 (2006) 212]: in particular, the algorithm generates 1/f noises with 0<α⩽2. Here I extend the algorithm to generate 1/f noises with 2<α⩽4 (black noises). The method is exact in the sense that it produces a sampled process with a theoretically guaranteed range-limited power-law spectrum for any arbitrary sequence of sampling intervals, i.e. the sampling times may be unevenly spaced. Program summaryTitle of program: PLNoise Catalogue identifier:ADXV_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADXV_v2_0.html Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Programming language used: ANSI C Computer: Any computer with an ANSI C compiler: the package has been tested with gcc version 3.2.3 on Red Hat Linux 3.2.3-52 and gcc version 4.0.0 and 4.0.1 on Apple Mac OS X-10.4 Operating system: All operating systems capable of running an ANSI C compiler RAM: The code of the test program is very compact (about 60 Kbytes), but the program works with list management and allocates memory dynamically; in a typical run with average list length 2ṡ10, the RAM taken by the list is 200 Kbytes External routines: The package needs external routines to generate uniform and exponential deviates. The implementation described here uses the random number generation library ranlib freely available from Netlib [B.W. Brown, J. Lovato, K. Russell: ranlib, available from Netlib, http://www.netlib.org/random/index.html, select the C version ranlib.c], but it has also been successfully tested with the random number routines in Numerical Recipes [W.H. Press, S.A. Teulkolsky, W.T. Vetterling, B.P. Flannery, Numerical Recipes in C: The Art of Scientific Computing, second ed., Cambridge Univ. Press., Cambridge, 1992, pp. 274-290]. Notice that ranlib requires a pair of routines from the linear algebra package LINPACK, and that the distribution of ranlib includes the C source of these routines, in case LINPACK is not installed on the target machine. No. of lines in distributed program, including test data, etc.:2975 No. of bytes in distributed program, including test data, etc.:194 588 Distribution format:tar.gz Catalogue identifier of previous version: ADXV_v1_0 Journal reference of previous version: Comput. Phys. Comm. 175 (2006) 212 Does the new version supersede the previous version?: Yes Nature of problem: Exact generation of different types of colored noise. Solution method: Random superposition of relaxation processes [E. Milotti, Phys. Rev. E 72 (2005) 056701], possibly followed by an integration step to produce noise with spectral index >2. Reasons for the new version: Extension to 1/f noises with spectral index 2<α⩽4: the new version generates both noises with spectral with spectral index 0<α⩽2 and with 2<α⩽4. Summary of revisions: Although the overall structure remains the same, one routine has been added and several changes have been made throughout the code to include the new integration step. Unusual features: The algorithm is theoretically guaranteed to be exact, and unlike all other existing generators it can generate samples with uneven spacing. Additional comments: The program requires an initialization step; for some parameter sets this may become rather heavy. Running time: Running time varies widely with different input parameters, however in a test run like the one in Section 3 in the long write-up, the generation routine took on average about 75 μs for each sample.

CCD observations of Phoebe, 9th satellite of Saturn

NASA Astrophysics Data System (ADS)

Fienga, A.; Arlot, J.-E.; Baron, N.; Bec-Borsenberger, A.; Crochot, A.; Emelyanov, N.; Thuillot, W.

2002-08-01

In 1998 and 1999, we started observations of the 9th satellite of Saturn. We made 163 observations using the 120 cm-telescope of Observatoire de Haute-Provence, France. We used the USNO A2 catalogue of stars for the astrometric reduction. With the help of observations of optical counterparts of ICRF sources, a zonal correction to the USNO A2.0 catalogue was computed and applied to the Phoebe positions. A comparison with the most recent theories was made.

2MASS Extended Source Catalog: Overview and Algorithms

NASA Technical Reports Server (NTRS)

Jarrett, T.; Chester, T.; Cutri, R.; Schneider, S.; Skrutskie, M.; Huchra, J.

1999-01-01

The 2 Micron All-Sky Survey (2MASS)will observe over one-million galaxies and extended Galactic sources covering the entire sky at wavelenghts between 1 and 2 m. Most of these galaxies, from 70 to 80%, will be newly catalogued objetcs.

An Equivalent Moment Magnitude Earthquake Catalogue for Western Turkey and its Quantitative Properties

NASA Astrophysics Data System (ADS)

Leptokaropoulos, Konstantinos; Vasilios, Karakostas; Eleftheria, Papadimitriou; Aggeliki, Adamaki; Onur, Tan; Zumer, Pabuçcu

2013-04-01

Earthquake catalogues consist a basic product of seismology, resulting from complex procedures and suffering from natural and man-made errors. The accumulation of these problems over space and time lead to inhomogeneous catalogues which in turn lead to significant uncertainties in many kinds of analyses, such as seismicity rate evaluation and seismic hazard assessment. A major source of catalogue inhomogeneity is the variety of magnitude scales (i.e. Mw, mb, MS, ML, Md), reported from different institutions and sources. Therefore an effort is made in this study to compile a catalogue as homogenous as possible regarding the magnitude scale for the region of Western Turkey (26oE - 32oE longitude, 35oN - 43oN latitude), one of the most rapidly deforming regions worldwide with intense seismic activity, complex fault systems and frequent strong earthquakes. For this purpose we established new relationships to transform as many as possible available magnitudes into equivalent moment magnitude scale, M*w. These relations yielded by the application of the General Orthogonal Regression method and the statistical significance of the results was quantified. The final equivalent moment magnitude was evaluated by taking into consideration all the available magnitudes for which a relation was obtained and also a weight inversely proportional to their standard deviation. Once the catalogue was compiled the magnitude of completeness, Mc, was investigated in both space and time regime. The b-values and their accuracy were also calculated by the maximum likelihood estimate. The spatial and temporal constraints were selected in respect to seismicity recording level, since the state and evolution of the local and regional seismic networks are unknown. We modified and applied the Goodness of Fit test of Wiemer and Wyss (2000) in order to be more effective in datasets that are characterized by smaller sample size and higher Mcthresholds. The compiled catalogue and the Mcevaluation technique introduced in this study may constitute a useful tool for future seismicity research in Western Turkey. Acknowledgements: This work was partially supported by the research project titled as "Seismotectonic properties of the eastern Aegean: Implications on the stress field evolution and seismic hazard assessment in a tectonically complex area", GSRT 10 T UR/ 1-3-9, Joint Research and Technology Programmes 2010 - 2011, financed by the Ministry of Education of Greece.

Chandra survey in the AKARI North Ecliptic Pole Deep Field - I. X-ray data, point-like source catalogue, sensitivity maps, and number counts

NASA Astrophysics Data System (ADS)

Krumpe, M.; Miyaji, T.; Brunner, H.; Hanami, H.; Ishigaki, T.; Takagi, T.; Markowitz, A. G.; Goto, T.; Malkan, M. A.; Matsuhara, H.; Pearson, C.; Ueda, Y.; Wada, T.

2015-01-01

We present data products from the 300 ks Chandra survey in the AKARI North Ecliptic Pole Deep Field. This field has a unique set of nine-band infrared photometry covering 2-24 μm from the AKARI Infrared Camera, including mid-infrared (MIR) bands not covered by Spitzer. The survey is one of the deepest ever achieved at ˜15 μm, and is by far the widest among those with similar depths in the MIR. This makes this field unique for the MIR-selection of AGN at z ˜ 1. We design a source detection procedure, which performs joint maximum likelihood PSF (point spread function) fits on all of our 15 mosaicked Chandra pointings covering an area of 0.34 deg2. The procedure has been highly optimized and tested by simulations. We provide a point source catalogue with photometry and Bayesian-based 90 per cent confidence upper limits in the 0.5-7, 0.5-2, 2-7, 2-4, and 4-7 keV bands. The catalogue contains 457 X-ray sources and the spurious fraction is estimated to be ˜1.7 per cent. Sensitivity and 90 per cent confidence upper flux limits maps in all bands are provided as well. We search for optical-MIR counterparts in the central 0.25 deg2, where deep Subaru Suprime-Cam multiband images exist. Among the 377 X-ray sources detected there, ˜80 per cent have optical counterparts and ˜60 per cent also have AKARI MIR counterparts. We cross-match our X-ray sources with MIR-selected AGN from Hanami et al. Around 30 per cent of all AGN that have MIR SEDs purely explainable by AGN activity are strong Compton-thick AGN candidates.

Tsunami Catalogues for the Eastern Mediterranean - Revisited.

NASA Astrophysics Data System (ADS)

Ambraseys, N.; Synolakis, C. E.

2008-12-01

We critically examine examine tsunami catalogues of tsunamis in the Eastern Mediterranean published in the last decade, by reference to the original sources, see Ambraseys (2008). Such catalogues have been widely used in the aftermath of the 2004 Boxing Day tsunami for probabilistic hazard analysis, even to make projections for a ten year time frame. On occasion, such predictions have caused panic and have reduced the credibility of the scientific community in making hazard assessments. We correct classification and other spurious errors in earlier catalogues and posit a new list. We conclude that for some historic events, any assignment of magnitude, even on a six point intensity scale is inappropriate due to lack of information. Further we assert that any tsunami catalogue, including ours, can only be used in conjunction with sedimentologic evidence to quantitatively infer the return period of larger events. Statistical analyses correlating numbers of tsunami events derived solely from catalogues with their inferred or imagined intensities are meaningless, at least when focusing on specific locales where only a handful of tsunamis are known to have been historically reported. Quantitative hazard assessments based on scenario events of historic tsunamis for which -at best- only the size and approximate location of the parent earthquake is known should be undertaken with extreme caution and only with benefit of geologic studies to enhance the understanding of the local tectonics. Ambraseys N. (2008) Earthquakes in the Eastern Mediterranean and the Middle East: multidisciplinary study of 2000 years of seimicity, Cambridge Univ. Press, Cambridge (ISBN 9780521872928).

The Solar Stormwatch CME catalogue: Results from the first space weather citizen science project

NASA Astrophysics Data System (ADS)

Barnard, L.; Scott, C.; Owens, M.; Lockwood, M.; Tucker-Hood, K.; Thomas, S.; Crothers, S.; Davies, J. A.; Harrison, R.; Lintott, C.; Simpson, R.; O'Donnell, J.; Smith, A. M.; Waterson, N.; Bamford, S.; Romeo, F.; Kukula, M.; Owens, B.; Savani, N.; Wilkinson, J.; Baeten, E.; Poeffel, L.; Harder, B.

2014-12-01

Solar Stormwatch was the first space weather citizen science project, the aim of which is to identify and track coronal mass ejections (CMEs) observed by the Heliospheric Imagers aboard the STEREO satellites. The project has now been running for approximately 4 years, with input from >16,000 citizen scientists, resulting in a data set of >38,000time-elongation profiles of CME trajectories, observed over 18 preselected position angles. We present our method for reducing this data set into a CME catalogue. The resulting catalogue consists of 144 CMEs over the period January 2007 to February 2010, of which 110 were observed by STEREO-A and 77 were observed by STEREO-B. For each CME, the time-elongation profiles generated by the citizen scientists are averaged into a consensus profile along each position angle that the event was tracked. We consider this catalogue to be unique, being at present the only citizen science-generated CME catalogue, tracking CMEs over an elongation range of 4° out to a maximum of approximately 70°. Using single spacecraft fitting techniques, we estimate the speed, direction, solar source region, and latitudinal width of each CME. This shows that at present, the Solar Stormwatch catalogue (which covers only solar minimum years) contains almost exclusively slow CMEs, with a mean speed of approximately 350 km s-1. The full catalogue is available for public access at www.met.reading.ac.uk/~spate/solarstormwatch. This includes, for each event, the unprocessed time-elongation profiles generated by Solar Stormwatch, the consensus time-elongation profiles, and a set of summary plots, as well as the estimated CME properties.

CRITIC2: A program for real-space analysis of quantum chemical interactions in solids

NASA Astrophysics Data System (ADS)

Otero-de-la-Roza, A.; Johnson, Erin R.; Luaña, Víctor

2014-03-01

We present CRITIC2, a program for the analysis of quantum-mechanical atomic and molecular interactions in periodic solids. This code, a greatly improved version of the previous CRITIC program (Otero-de-la Roza et al., 2009), can: (i) find critical points of the electron density and related scalar fields such as the electron localization function (ELF), Laplacian, … (ii) integrate atomic properties in the framework of Bader’s Atoms-in-Molecules theory (QTAIM), (iii) visualize non-covalent interactions in crystals using the non-covalent interactions (NCI) index, (iv) generate relevant graphical representations including lines, planes, gradient paths, contour plots, atomic basins, … and (v) perform transformations between file formats describing scalar fields and crystal structures. CRITIC2 can interface with the output produced by a variety of electronic structure programs including WIEN2k, elk, PI, abinit, Quantum ESPRESSO, VASP, Gaussian, and, in general, any other code capable of writing the scalar field under study to a three-dimensional grid. CRITIC2 is parallelized, completely documented (including illustrative test cases) and publicly available under the GNU General Public License. Catalogue identifier: AECB_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AECB_v2_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: yes No. of lines in distributed program, including test data, etc.: 11686949 No. of bytes in distributed program, including test data, etc.: 337020731 Distribution format: tar.gz Programming language: Fortran 77 and 90. Computer: Workstations. Operating system: Unix, GNU/Linux. Has the code been vectorized or parallelized?: Shared-memory parallelization can be used for most tasks. Classification: 7.3. Catalogue identifier of previous version: AECB_v1_0 Journal reference of previous version: Comput. Phys. Comm. 180 (2009) 157 Nature of problem: Analysis of quantum-chemical interactions in periodic solids by means of atoms-in-molecules and related formalisms. Solution method: Critical point search using Newton’s algorithm, atomic basin integration using bisection, qtree and grid-based algorithms, diverse graphical representations and computation of the non-covalent interactions index on a three-dimensional grid. Additional comments: !!!!! The distribution file for this program is over 330 Mbytes and therefore is not delivered directly when download or Email is requested. Instead a html file giving details of how the program can be obtained is sent. !!!!! Running time: Variable, depending on the crystal and the source of the underlying scalar field.

Amplitude and recurrence time analysis of LP activity at Mount Etna, Italy

NASA Astrophysics Data System (ADS)

Cauchie, Léna; Saccorotti, Gilberto; Bean, Christopher J.

2015-09-01

The aim of this work is to improve our understanding of the long-period (LP) source mechanism at Mount Etna (Italy) through a statistical analysis of detailed LP catalogues. The behavior of LP activity is compared with the empirical laws governing earthquake recurrence, in order to investigate whether any relationships exist between these two apparently different earthquake classes. We analyzed a family of 8894 events detected during a temporary experiment in August 2005. For that time interval, the LP activity is sustained in time and the volcano did not exhibit any evident sign of unrest. The completeness threshold of the catalogue is established through a detection test based on synthetic waveforms. The retrieved amplitude distribution differs significantly from the Gutenberg-Richter law, and the interevent times distribution does not follow the typical γ law, expected for tectonic activity. In order to compare these results with a catalogue for which the source mechanism is well established, we applied the same procedure to a data set from Stromboli Volcano, where recurrent LP activity is closely related to very-long-period pulses, in turn associated with the summit explosions. Our results indicate that the two catalogues exhibit similar behavior in terms of amplitude and interevent time distributions. This suggests that the Etna's LP signals are most likely driven by stress changes caused by an intermittent degassing process occurring at depth, similar to that which drives the summit explosions at Stromboli Volcano.

Simulating electron energy loss spectroscopy with the MNPBEM toolbox

NASA Astrophysics Data System (ADS)

Hohenester, Ulrich

2014-03-01

Within the MNPBEM toolbox, we show how to simulate electron energy loss spectroscopy (EELS) of plasmonic nanoparticles using a boundary element method approach. The methodology underlying our approach closely follows the concepts developed by García de Abajo and coworkers (Garcia de Abajo, 2010). We introduce two classes eelsret and eelsstat that allow in combination with our recently developed MNPBEM toolbox for a simple, robust, and efficient computation of EEL spectra and maps. The classes are accompanied by a number of demo programs for EELS simulation of metallic nanospheres, nanodisks, and nanotriangles, and for electron trajectories passing by or penetrating through the metallic nanoparticles. We also discuss how to compute electric fields induced by the electron beam and cathodoluminescence. Catalogue identifier: AEKJ_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKJ_v2_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 38886 No. of bytes in distributed program, including test data, etc.: 1222650 Distribution format: tar.gz Programming language: Matlab 7.11.0 (R2010b). Computer: Any which supports Matlab 7.11.0 (R2010b). Operating system: Any which supports Matlab 7.11.0 (R2010b). RAM:≥1 GB Classification: 18. Catalogue identifier of previous version: AEKJ_v1_0 Journal reference of previous version: Comput. Phys. Comm. 183 (2012) 370 External routines: MESH2D available at www.mathworks.com Does the new version supersede the previous version?: Yes Nature of problem: Simulation of electron energy loss spectroscopy (EELS) for plasmonic nanoparticles. Solution method: Boundary element method using electromagnetic potentials. Reasons for new version: The new version of the toolbox includes two additional classes for the simulation of electron energy loss spectroscopy (EELS) of plasmonic nanoparticles, and corrects a few minor bugs and inconsistencies. Summary of revisions: New classes “eelsstat” and “eelsret” for the simulation of electron energy loss spectroscopy (EELS) of plasmonic nanoparticles have been added. A few minor errors in the implementation of dipole excitation have been corrected. Running time: Depending on surface discretization between seconds and hours.

Statistics of the fractional polarization of extragalactic dusty sources in Planck HFI maps

NASA Astrophysics Data System (ADS)

Bonavera, L.; González-Nuevo, J.; De Marco, B.; Argüeso, F.; Toffolatti, L.

2017-11-01

We estimate the average fractional polarization at 143, 217 and 353 GHz of a sample of 4697 extragalactic dusty sources by applying stacking technique. The sample is selected from the second version of the Planck Catalogue of Compact Sources at 857 GHz, avoiding the region inside the Planck Galactic mask (fsky ∼ 60 per cent). We recover values for the mean fractional polarization at 217 and 353 GHz of (3.10 ± 0.75) per cent and (3.65 ± 0.66) per cent, respectively, whereas at 143 GHz we give a tentative value of (3.52 ± 2.48) per cent. We discuss the possible origin of the measured polarization, comparing our new estimates with those previously obtained from a sample of radio sources. We test different distribution functions and we conclude that the fractional polarization of dusty sources is well described by a log-normal distribution, as determined in the radio band studies. For this distribution we estimate μ217GHz = 0.3 ± 0.5 [that would correspond to a median fractional polarization of Πmed = (1.3 ± 0.7) per cent] and μ353GHz = 0.7 ± 0.4 (Πmed = (2.0 ± 0.8) per cent), σ217GHz = 1.3 ± 0.2 and σ353GHz = 1.1 ± 0.2. With these values we estimate the source number counts in polarization and the contribution given by these sources to the Cosmic Microwave Background B-mode angular power spectrum at 217, 353, 600 and 800 GHz. We conclude that extragalactic dusty sources might be an important contaminant for the primordial B-mode at frequencies >217 GHz.

Flat-Spectrum Radio Sources as Likely Counterparts of Unidentified INTEGRAL Sources (Research Note)

NASA Technical Reports Server (NTRS)

Molina, M.; Landi, R.; Bassani, L.; Malizia, A.; Stephen, J. B.; Bazzano, A.; Bird, A. J.; Gehrels, N.

2012-01-01

Many sources in the fourth INTEGRAL/IBIS catalogue are still unidentified since they lack an optical counterpart. An important tool that can help in identifying and classifying these sources is the cross-correlation with radio catalogues, which are very sensitive and positionally accurate. Moreover, the radio properties of a source, such as the spectrum or morphology, could provide further insight into its nature. In particular, flat-spectrum radio sources at high Galactic latitudes are likely to be AGN, possibly associated to a blazar or to the compact core of a radio galaxy. Here we present a small sample of 6 sources extracted from the fourth INTEGRAL/IBIS catalogue that are still unidentified or unclassified, but which are very likely associated with a bright, flat-spectrum radio object. To confirm the association and to study the source X-ray spectral parameters, we performed X-ray follow-up observations with Swift/XRT of all objects. We report in this note the overall results obtained from this search and discuss the nature of each individual INTEGRAL source. We find that 5 of the 6 radio associations are also detected in X-rays; furthermore, in 3 cases they are the only counterpart found. More specifically, IGR J06073-0024 is a flat-spectrum radio quasar at z = 1.08, IGR J14488-4008 is a newly discovered radio galaxy, while IGR J18129-0649 is an AGN of a still unknown type. The nature of two sources (IGR J07225-3810 and IGR J19386-4653) is less well defined, since in both cases we find another X-ray source in the INTEGRAL error circle; nevertheless, the flat-spectrum radio source, likely to be a radio loud AGN, remains a viable and, in fact, a more convincing association in both cases. Only for the last object (IGR J11544-7618) could we not find any convincing counterpart since the radio association is not an X-ray emitter, while the only X-ray source seen in the field is a G star and therefore unlikely to produce the persistent emission seen by INTEGRAL.

CADNA_C: A version of CADNA for use with C or C++ programs

NASA Astrophysics Data System (ADS)

Lamotte, Jean-Luc; Chesneaux, Jean-Marie; Jézéquel, Fabienne

2010-11-01

The CADNA library enables one to estimate round-off error propagation using a probabilistic approach. The CADNA_C version enables this estimation in C or C++ programs, while the previous version had been developed for Fortran programs. The CADNA_C version has the same features as the previous one: with CADNA the numerical quality of any simulation program can be controlled. Furthermore by detecting all the instabilities which may occur at run time, a numerical debugging of the user code can be performed. CADNA provides new numerical types on which round-off errors can be estimated. Slight modifications are required to control a code with CADNA, mainly changes in variable declarations, input and output. New version program summaryProgram title: CADNA_C Catalogue identifier: AEGQ_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEGQ_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 60 075 No. of bytes in distributed program, including test data, etc.: 710 781 Distribution format: tar.gz Programming language: C++ Computer: PC running LINUX with an i686 or an ia64 processor, UNIX workstations including SUN, IBM Operating system: LINUX, UNIX Classification: 6.5 Catalogue identifier of previous version: AEAT_v1_0 Journal reference of previous version: Comput. Phys. Comm. 178 (2008) 933 Does the new version supersede the previous version?: No Nature of problem: A simulation program which uses floating-point arithmetic generates round-off errors, due to the rounding performed at each assignment and at each arithmetic operation. Round-off error propagation may invalidate the result of a program. The CADNA library enables one to estimate round-off error propagation in any simulation program and to detect all numerical instabilities that may occur at run time. Solution method: The CADNA library [1-3] implements Discrete Stochastic Arithmetic [4,5] which is based on a probabilistic model of round-off errors. The program is run several times with a random rounding mode generating different results each time. From this set of results, CADNA estimates the number of exact significant digits in the result that would have been computed with standard floating-point arithmetic. Reasons for new version: The previous version (AEAT_v1_0) enables the estimation of round-off error propagation in Fortran programs [2]. The new version has been developed to enable this estimation in C or C++ programs. Summary of revisions: The CADNA_C source code consists of one assembly language file (cadna_rounding.s) and twenty-three C++ language files (including three header files). cadna_rounding.s is a symbolic link to the assembly file corresponding to the processor and the C++ compiler used. This assembly file contains routines which are frequently called in the CADNA_C C++ files to change the rounding mode. The C++ language files contain the definition of the stochastic types on which the control of accuracy can be performed, CADNA_C specific functions (for instance to enable or disable the detection of numerical instabilities), the definition of arithmetic and relational operators which are overloaded for stochastic variables and the definition of mathematical functions which can be used with stochastic arguments. As a remark, on 64-bit processors, the mathematical library associated with the GNU C++ compiler may provide incorrect results or generate severe bugs with rounding towards -∞ and +∞, which the random rounding mode is based on. Therefore, if CADNA_C is used on a 64-bit processor with the GNU C++ compiler, mathematical functions are computed with rounding to the nearest, otherwise they are computed with the random rounding mode. It must be pointed out that the knowledge of the accuracy of the argument of a mathematical function is never lost. Additional comments: In the library archive, users are advised to read the INSTALL file first. The doc directory contains a user guide named ug.cadna.pdf and a reference guide named, ref_cadna.pdf. The user guide shows how to control the numerical accuracy of a program using CADNA, provides installation instructions and describes test runs.The reference guide briefly describes each function of the library. The source code (which consists of C++ and assembly files) is located in the src directory. The examples directory contains seven test runs which illustrate the use of the CADNA library and the benefits of Discrete Stochastic Arithmetic. Running time: The version of a code which uses CADNA runs at least three times slower than its floating-point version. This cost depends on the computer architecture and can be higher if the detection of numerical instabilities is enabled. In this case, the cost may be related to the number of instabilities detected.

VizieR Online Data Catalog: MSX high-contrast IRDCs with NH3 (Chira+,

NASA Astrophysics Data System (ADS)

Chira, R.-A.; Beuther, H.; Linz, H.; Walmsley, C. M.; Menten, K. M.; Bonfman, L.

2013-02-01

Based on MSX data, a catalogue of more than 10,000 candidate IRDCs was compiled. From this catalogue we selected a complete sample of northern hemisphere high-contrast IRDCs with Galactic longitudes >=19.27° (and nine exceptions with Galactic longitudes <19°). The sample was observed in ammonia (1,1) and (2,2) inversion transitions with the Effelsberg 100-m telescope. NH3 parameters are derived for 109 sample sources. For each source galactic coordinates, brightness temperatures, line width FWHMs and optical depths of (1,1) and (2,2) inversion lines and LSR velocity of (1,1) inversion line are given. Furthermore, we derived the rotation and kinetic temperatures, ammonia column densities, kinematic distances and virial masses using the NH3 data. In addition, notes about whether the sources being associated with Spitzer sources or not are given. Using ATLASGAL data, the 870 micron flux densities gas masses, virial parameters, H2 column densities and NH3 abundances are given. In addition, we listed the sample sources where no ammonia which did not fulfil our selection criteria. (4 data files).

A new approach to geographic partitioning of probabilistic seismic hazard using seismic source distance with earthquake extreme and perceptibility statistics: an application to the southern Balkan region

NASA Astrophysics Data System (ADS)

Bayliss, T. J.

2016-02-01

The southeastern European cities of Sofia and Thessaloniki are explored as example site-specific scenarios by geographically zoning their individual localized seismic sources based on the highest probabilities of magnitude exceedance. This is with the aim of determining the major components contributing to each city's seismic hazard. Discrete contributions from the selected input earthquake catalogue are investigated to determine those areas that dominate each city's prevailing seismic hazard with respect to magnitude and source-to-site distance. This work is based on an earthquake catalogue developed and described in a previously published paper by the author and components of a magnitude probability density function. Binned magnitude and distance classes are defined using a joint magnitude-distance distribution. The prevailing seismicity to each city-as defined by a child data set extracted from the parent earthquake catalogue for each city considered-is divided into distinct constrained data bins of small discrete magnitude and source-to-site distance intervals. These are then used to describe seismic hazard in terms of uni-variate modal values; that is, M* and D* which are the modal magnitude and modal source-to-site distance in each city's local historical seismicity. This work highlights that Sofia's dominating seismic hazard-that is, the modal magnitudes possessing the highest probabilities of occurrence-is located in zones confined to two regions at 60-80 km and 170-180 km from this city, for magnitude intervals of 5.75-6.00 Mw and 6.00-6.25 Mw respectively. Similarly, Thessaloniki appears prone to highest levels of hazard over a wider epicentral distance interval, from 80 to 200 km in the moment magnitude range 6.00-6.25 Mw.

The MICE Grand Challenge lightcone simulation - II. Halo and galaxy catalogues

NASA Astrophysics Data System (ADS)

Crocce, M.; Castander, F. J.; Gaztañaga, E.; Fosalba, P.; Carretero, J.

2015-10-01

This is the second in a series of three papers in which we present an end-to-end simulation from the MICE collaboration, the MICE Grand Challenge (MICE-GC) run. The N-body contains about 70 billion dark-matter particles in a (3 h-1 Gpc)3 comoving volume spanning five orders of magnitude in dynamical range. Here, we introduce the halo and galaxy catalogues built upon it, both in a wide (5000 deg2) and deep (z < 1.4) lightcone and in several comoving snapshots. Haloes were resolved down to few 1011 h-1 M⊙. This allowed us to model galaxies down to absolute magnitude Mr < -18.9. We used a new hybrid halo occupation distribution and abundance matching technique for galaxy assignment. The catalogue includes the spectral energy distributions of all galaxies. We describe a variety of halo and galaxy clustering applications. We discuss how mass resolution effects can bias the large-scale two-pt clustering amplitude of poorly resolved haloes at the ≲5 per cent level, and their three-pt correlation function. We find a characteristic scale-dependent bias of ≲6 per cent across the BAO feature for haloes well above M⋆ ˜ 1012 h-1 M⊙ and for luminous red galaxy like galaxies. For haloes well below M⋆ the scale dependence at 100 h-1 Mpc is ≲2 per cent. Lastly, we discuss the validity of the large-scale Kaiser limit across redshift and departures from it towards non-linear scales. We make the current version of the lightcone halo and galaxy catalogue (MICECATv1.0) publicly available through a dedicated web portal to help develop and exploit the new generation of astronomical surveys.

HYPERDIRE-HYPERgeometric functions DIfferential REduction: Mathematica-based packages for the differential reduction of generalized hypergeometric functions: Lauricella function FC of three variables

NASA Astrophysics Data System (ADS)

Bytev, Vladimir V.; Kniehl, Bernd A.

2016-09-01

We present a further extension of the HYPERDIRE project, which is devoted to the creation of a set of Mathematica-based program packages for manipulations with Horn-type hypergeometric functions on the basis of differential equations. Specifically, we present the implementation of the differential reduction for the Lauricella function FC of three variables. Catalogue identifier: AEPP_v4_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEPP_v4_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 243461 No. of bytes in distributed program, including test data, etc.: 61610782 Distribution format: tar.gz Programming language: Mathematica. Computer: All computers running Mathematica. Operating system: Operating systems running Mathematica. Classification: 4.4. Does the new version supersede the previous version?: No, it significantly extends the previous version. Nature of problem: Reduction of hypergeometric function FC of three variables to a set of basis functions. Solution method: Differential reduction. Reasons for new version: The extension package allows the user to handle the Lauricella function FC of three variables. Summary of revisions: The previous version goes unchanged. Running time: Depends on the complexity of the problem.

The Bologna complete sample of nearby radio sources. II. Phase referenced observations of faint nuclear sources

NASA Astrophysics Data System (ADS)

Liuzzo, E.; Giovannini, G.; Giroletti, M.; Taylor, G. B.

2009-10-01

Aims: To study statistical properties of different classes of sources, it is necessary to observe a sample that is free of selection effects. To do this, we initiated a project to observe a complete sample of radio galaxies selected from the B2 Catalogue of Radio Sources and the Third Cambridge Revised Catalogue (3CR), with no selection constraint on the nuclear properties. We named this sample “the Bologna Complete Sample” (BCS). Methods: We present new VLBI observations at 5 and 1.6 GHz for 33 sources drawn from a sample not biased toward orientation. By combining these data with those in the literature, information on the parsec-scale morphology is available for a total of 76 of 94 radio sources with a range in radio power and kiloparsec-scale morphologies. Results: The fraction of two-sided sources at milliarcsecond resolution is high (30%), compared to the fraction found in VLBI surveys selected at centimeter wavelengths, as expected from the predictions of unified models. The parsec-scale jets are generally found to be straight and to line up with the kiloparsec-scale jets. A few peculiar sources are discussed in detail. Tables 1-4 are only available in electronic form at http://www.aanda.org

Quasar probabilities and redshifts from WISE mid-IR through GALEX UV photometry

NASA Astrophysics Data System (ADS)

DiPompeo, M. A.; Bovy, J.; Myers, A. D.; Lang, D.

2015-09-01

Extreme deconvolution (XD) of broad-band photometric data can both separate stars from quasars and generate probability density functions for quasar redshifts, while incorporating flux uncertainties and missing data. Mid-infrared photometric colours are now widely used to identify hot dust intrinsic to quasars, and the release of all-sky WISE data has led to a dramatic increase in the number of IR-selected quasars. Using forced photometry on public WISE data at the locations of Sloan Digital Sky Survey (SDSS) point sources, we incorporate this all-sky data into the training of the XDQSOz models originally developed to select quasars from optical photometry. The combination of WISE and SDSS information is far more powerful than SDSS alone, particularly at z > 2. The use of SDSS+WISE photometry is comparable to the use of SDSS+ultraviolet+near-IR data. We release a new public catalogue of 5537 436 (total; 3874 639 weighted by probability) potential quasars with probability PQSO > 0.2. The catalogue includes redshift probabilities for all objects. We also release an updated version of the publicly available set of codes to calculate quasar and redshift probabilities for various combinations of data. Finally, we demonstrate that this method of selecting quasars using WISE data is both more complete and efficient than simple WISE colour-cuts, especially at high redshift. Our fits verify that above z ˜ 3 WISE colours become bluer than the standard cuts applied to select quasars. Currently, the analysis is limited to quasars with optical counterparts, and thus cannot be used to find highly obscured quasars that WISE colour-cuts identify in significant numbers.

THROES: a caTalogue of HeRschel Observations of Evolved Stars. I. PACS range spectroscopy

NASA Astrophysics Data System (ADS)

Ramos-Medina, J.; Sánchez Contreras, C.; García-Lario, P.; Rodrigo, C.; da Silva Santos, J.; Solano, E.

2018-03-01

This is the first of a series of papers presenting the THROES (A caTalogue of HeRschel Observations of Evolved Stars) project, intended to provide a comprehensive overview of the spectroscopic results obtained in the far-infrared (55-670 μm) with the Herschel space observatory on low-to-intermediate mass evolved stars in our Galaxy. Here we introduce the catalogue of interactively reprocessed Photoconductor Array Camera and Spectrometer (PACS) spectra covering the 55-200 μm range for 114 stars in this category for which PACS range spectroscopic data is available in the Herschel Science Archive (HSA). Our sample includes objects spanning a range of evolutionary stages, from the asymptotic giant branch to the planetary nebula phase, displaying a wide variety of chemical and physical properties. The THROES/PACS catalogue is accessible via a dedicated web-based interface and includes not only the science-ready Herschel spectroscopic data for each source, but also complementary photometric and spectroscopic data from other infrared observatories, namely IRAS, ISO, or AKARI, at overlapping wavelengths. Our goal is to create a legacy-value Herschel dataset that can be used by the scientific community in the future to deepen our knowledge and understanding of these latest stages of the evolution of low-to-intermediate mass stars. The THROES/PACS catalogue is accessible at http://https://throes.cab.inta-csic.es/

A Ks-band-selected catalogue of objects in the ALHAMBRA survey

NASA Astrophysics Data System (ADS)

Nieves-Seoane, L.; Fernandez-Soto, A.; Arnalte-Mur, P.; Molino, A.; Stefanon, M.; Ferreras, I.; Ascaso, B.; Ballesteros, F. J.; Cristóbal-Hornillos, D.; López-Sanjuán, C.; Hurtado-Gil, Ll.; Márquez, I.; Masegosa, J.; Aguerri, J. A. L.; Alfaro, E.; Aparicio-Villegas, T.; Benítez, N.; Broadhurst, T.; Cabrera-Caño, J.; Castander, F. J.; Cepa, J.; Cerviño, M.; González Delgado, R. M.; Husillos, C.; Infante, L.; Martínez, V. J.; Moles, M.; Olmo, A. del; Perea, J.; Pović, M.; Prada, F.; Quintana, J. M.; Troncoso-Iribarren, P.; Viironen, K.

2017-02-01

The original ALHAMBRA catalogue contained over 400 000 galaxies selected using a synthetic F814W image, to the magnitude limit AB(F814W) ≈ 24.5. Given the photometric redshift depth of the ALHAMBRA multiband data ( = 0.86) and the approximately I-band selection, there is a noticeable bias against red objects at moderate redshift. We avoid this bias by creating a new catalogue selected in the Ks band. This newly obtained catalogue is certainly shallower in terms of apparent magnitude, but deeper in terms of redshift, with a significant population of red objects at z > 1. We select objects using the Ks band images, which reach an approximate AB magnitude limit Ks ≈ 22. We generate masks and derive completeness functions to characterize the sample. We have tested the quality of the photometry and photometric redshifts using both internal and external checks. Our final catalogue includes ≈95 000 sources down to Ks ≈ 22, with a significant tail towards high redshift. We have checked that there is a large sample of objects with spectral energy distributions that correspond to that of massive, passively evolving galaxies at z > 1, reaching as far as z ≈ 2.5. We have tested the possibility of combining our data with deep infrared observations at longer wavelengths, particularly Spitzer IRAC data.

Astrometry with A-Track Using Gaia DR1 Catalogue

NASA Astrophysics Data System (ADS)

Kılıç, Yücel; Erece, Orhan; Kaplan, Murat

2018-04-01

In this work, we built all sky index files from Gaia DR1 catalogue for the high-precision astrometric field solution and the precise WCS coordinates of the moving objects. For this, we used build-astrometry-index program as a part of astrometry.net code suit. Additionally, we added astrometry.net's WCS solution tool to our previously developed software which is a fast and robust pipeline for detecting moving objects such as asteroids and comets in sequential FITS images, called A-Track. Moreover, MPC module was added to A-Track. This module is linked to an asteroid database to name the found objects and prepare the MPC file to report the results. After these innovations, we tested a new version of the A-Track code on photometrical data taken by the SI-1100 CCD with 1-meter telescope at TÜBİTAK National Observatory, Antalya. The pipeline can be used to analyse large data archives or daily sequential data. The code is hosted on GitHub under the GNU GPL v3 license.

Near-infrared variability study of the central 2.3 arcmin × 2.3 arcmin of the Galactic Centre - I. Catalogue of variable sources

NASA Astrophysics Data System (ADS)

Dong, Hui; Schödel, Rainer; Williams, Benjamin F.; Nogueras-Lara, Francisco; Gallego-Cano, Eulalia; Gallego-Calvente, Teresa; Wang, Q. Daniel; Morris, Mark R.; Do, Tuan; Ghez, Andrea

2017-09-01

We used 4-yr baseline Hubble Space Telescope/Wide Field Camera 3 IR observations of the Galactic Centre in the F153M band (1.53 μm) to identify variable stars in the central ∼2.3 arcmin × 2.3 arcmin field. We classified 3845 long-term (periods from months to years) and 76 short-term (periods of a few days or less) variables among a total sample of 33 070 stars. For 36 of the latter ones, we also derived their periods (<3 d). Our catalogue not only confirms bright long period variables and massive eclipsing binaries identified in previous works but also contains many newly recognized dim variable stars. For example, we found δ Scuti and RR Lyrae stars towards the Galactic Centre for the first time, as well as one BL Her star (period < 1.3 d). We cross-correlated our catalogue with previous spectroscopic studies and found that 319 variables have well-defined stellar types, such as Wolf-Rayet, OB main sequence, supergiants and asymptotic giant branch stars. We used colours and magnitudes to infer the probable variable types for those stars without accurately measured periods or spectroscopic information. We conclude that the majority of unclassified variables could potentially be eclipsing/ellipsoidal binaries and Type II Cepheids. Our source catalogue will be valuable for future studies aimed at constraining the distance, star formation history and massive binary fraction of the Milky Way nuclear star cluster.

VizieR Online Data Catalog: Radio-loud and radio-quiet quasars sample (Gupta+, 2016)

NASA Astrophysics Data System (ADS)

Gupta, M.; Sikora, M.; Nalewajko, K.

2017-11-01

We performed matching of the FR II quasar sample of van Velzen et al. (2015, Cat. J/MNRAS/446/2985) (1108 sources) with the SDSS DR7 quasar catalogue (Schneider et al., 2010AJ....139.2360S, Cat. VII/260) (105 783 sources). We used a matching radius of 5 arcsec and obtained 899 objects. This resulting sample of FR II quasars was then matched with the sample of SDSS DR7 quasars detected by the Wide-field Infrared Survey Explorer (WISE) (Wu et al., 2012, Cat. J/AJ/144/49). This gave us 895 FR II quasars detected in the MIR band. The RQ sample with MIR data is constructed by matching the DR7 quasar catalogue (Schneider et al., 2010AJ....139.2360S, Cat. VII/260) and Wise all-sky catalogue (Wu et al., 2012, Cat. J/AJ/144/49), using a matching radius of 1 arcsec, resulting in 101 853 objects. From these we remove the 899 RL quasars matched with the catalogue by van Velzen et al. (2015, Cat. J/MNRAS/446/2985), this leaves us with 100 958 quasars. We then remove objects that were detected by the FIRST survey (Becker et al. 1995ApJ...450..559B, Cat. VIII/92), this gives us 92 648. We repeat the same process with the NVSS (Condon, Cotton & Broderick, 1998AJ....115.1693C, Cat. VIII/65) and end up with 92 445 objects. We also removed those objects that were outside the FIRST observation region. (2 data files).

Connecting Coronal Mass Ejections to Their Solar Active Region Sources: Combining Results from the HELCATS and FLARECAST Projects

NASA Astrophysics Data System (ADS)

Murray, Sophie A.; Guerra, Jordan A.; Zucca, Pietro; Park, Sung-Hong; Carley, Eoin P.; Gallagher, Peter T.; Vilmer, Nicole; Bothmer, Volker

2018-04-01

Coronal mass ejections (CMEs) and other solar eruptive phenomena can be physically linked by combining data from a multitude of ground-based and space-based instruments alongside models; however, this can be challenging for automated operational systems. The EU Framework Package 7 HELCATS project provides catalogues of CME observations and properties from the Heliospheric Imagers on board the two NASA/STEREO spacecraft in order to track the evolution of CMEs in the inner heliosphere. From the main HICAT catalogue of over 2,000 CME detections, an automated algorithm has been developed to connect the CMEs observed by STEREO to any corresponding solar flares and active-region (AR) sources on the solar surface. CME kinematic properties, such as speed and angular width, are compared with AR magnetic field properties, such as magnetic flux, area, and neutral line characteristics. The resulting LOWCAT catalogue is also compared to the extensive AR property database created by the EU Horizon 2020 FLARECAST project, which provides more complex magnetic field parameters derived from vector magnetograms. Initial statistical analysis has been undertaken on the new data to provide insight into the link between flare and CME events, and characteristics of eruptive ARs. Warning thresholds determined from analysis of the evolution of these parameters is shown to be a useful output for operational space weather purposes. Parameters of particular interest for further analysis include total unsigned flux, vertical current, and current helicity. The automated method developed to create the LOWCAT catalogue may also be useful for future efforts to develop operational CME forecasting.

Industrial Demand Module - NEMS Documentation

EIA Publications

2014-01-01

Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Module. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code.

Quality management of clinical-practical instruction for Practical Year medical students in Germany - proposal for a catalogue of criteria from the German Society of Medical Education.

PubMed

Raes, Patricia; Angstwurm, Matthias; Berberat, Pascal; Kadmon, Martina; Rotgans, Jerome; Streitlein-Böhme, Irmgard; Burckhardt, Gerhard; Fischer, Martin R

2014-01-01

Amended in 2013, the current version of the German Medical Licensure Regulation contains structural specifications that are also required of non-university institutions involved in Practical Year clinical training. The criteria are worded in relatively general terms. Furthermore, not all of the structural specifications can be readily applied to every subject area. In order to ensure commensurability in Practical Year instruction in Germany, not least in light of recently introduced Practical Year mobility, it is necessary to define consistent quality criteria for Practical Year training. The authors therefore propose a catalogue of criteria for the quality management process in Practical Year instruction facilities. In January 2014, the board of directors of the German Society for Medical Education decided to establish a committee comprised of representatives from various German medical faculties. In a process similar to the Delphi methodology, the group developed criteria for structure, process and outcome quality in Practical Year training in Germany. The criteria developed for structure, process and outcome quality apply to Practical Year training in academic teaching hospitals and university medical centres. Furthermore, modalities for review are proposed. The present catalogue of criteria is intended to contribute to the formation of a basis for the most consistent quality standards possible for Practical Year instruction in Germany.

VizieR Online Data Catalog: JMMC Stellar Diameters Catalogue - JSDC. Version 2 (Bourges+, 2017)

NASA Astrophysics Data System (ADS)

Bourges, L.; Mella, G.; Lafrasse, S.; Duvert, G.; Chelli, A.; Le Bouquin, J.-B.; Delfosse, X.; Chesneau, O.

2017-01-01

The JMMC (Jean-Marie Mariotti Center) Calibrator Workgroup has long developed methods to estimate the angular diameter of stars, and provides this expertise in the SearchCal tool (http://www.jmmc.fr/searchcal). SearchCal creates a dynamical catalogue of stars suitable to calibrate Optical Long-Baseline Interferometry (OLBI) observations from on-line queries of CDS catalogues, according to observational parameters. In essence, SearchCal is limited only by the completeness of the stellar catalogues it uses, and in particular is not limited in magnitude. SearchCal being an application centered on the somewhat restricted OLBI observational purposes, it appeared useful to make our angular diameter estimates available for other purposes through a CDS-based catalog, the JMMC Stellar Diameters Catalogue (JSDC, II/300). This second version of the catalog represents a tenfold improvement both in terms of the number of objects and on the precision of the estimates. This is due to a new algorithm using reddening-free quantities -- the pseudomagnitudes, allied to a new database of all the measured stellar angular diameters -- the JMDC (II/345/jmdc), and a rigorous error propagation at all steps of the processing. All this is described in the associated publication by Chelli et al. (2016A&A...589A.112C). The catalog reports the Limb-Darkened Diameter (LDD) and error for 465877 stars, as well as their BVRIJHKLMN magnitudes, Uniform Disk Diameters (UDD) in these same photometric bands, Spectral Type, and two supplementary quality indicators: - the mean-diameter chi-square (see Appendix A.2 of Chelli et al., 2016A&A...589A.112C). - a flag indicating some degree of caution in choosing this star as an OLBI calibrator: known spectroscopic binaries, Algol type stars, etc, see Note (1). The conversion from LDD to UDD in each spectral band is made using mainly the coefficients from J/A+A/556/A86/table16 and J/A+A/554/A98/table16 when possible (compatible spectral types) and following the prescriptions of the JMMC report at http://www.mariotti.fr/doc/approved/JMMC-MEM-2610-0001.pdf in all other cases. The errors on UDD values are omitted as they are similar to the LDD error. Instead of using this catalog to find a suitable OLBI calibrator, the reader is invited to use the SearchCal tool at JMMC (http://www.jmmc.fr/searchcal) which permits a refined search, give access to other possible calibrators (faint stars not in the Tycho catalog) and benefits from the maintainance of JMMC and CDS databases. This catalog replaces the previous JSDC (II/300/jsdc). Almost all stars in II/300/jsdc are found in II/346 with a consistent diameter, with the exception of 1935 stars whose estimated diameter differs from more than 2 sigmas between the two catalogs. The associated file JSDCv2v1 dis.vot (jsdc dis.dat) summarizes this difference. (5 data files).

Screening and validation of EXTraS data products

NASA Astrophysics Data System (ADS)

Carpano, Stefania; Haberl, F.; De Luca, A.; Tiengo, A.: Israel, G.; Rodriguez, G.; Belfiore, A.; Rosen, S.; Read, A.; Wilms, J.; Kreikenbohm, A.; Law-Green, D.

2015-09-01

The EXTraS project (Exploring the X-ray Transient and variable Sky) is aimed at fullyexploring the serendipitous content of the XMM-Newton EPIC database in the timedomain. The project is funded within the EU/FP7-Cooperation Space framework and is carried out by a collaboration including INAF (Italy), IUSS (Italy), CNR/IMATI (Italy), University of Leicester (UK), MPE (Germany) and ECAP (Germany). The several tasks consist in characterise aperiodicvariability for all 3XMM sources, search for short-term periodic variability on hundreds of thousands sources, detect new transient sources that are missed by standard source detection and hence not belonging to the 3XMM catalogue, search for long term variability by measuring fluxes or upper limits for both pointed and slew observations, and finally perform multiwavelength characterisation andclassification. Screening and validation of the different products is essentially in order to reject flawed results, generated by the automatic pipelines. We present here the screening tool we developed in the form of a Graphical User Interface and our plans for a systematic screening of the different catalogues.

The LBA Calibrator Survey of Southern Compact Extragalactic Radio Sources - LCS1

NASA Technical Reports Server (NTRS)

Petrov, Leonid; Phillips, Chris; Bertarini, Alessandra; Murphy, Tara; Sadler, Elaine M.

2011-01-01

We present a catalogue of accurate positions and correlated flux densities for 410 flat-spectrum, compact extragalactic radio sources previously detected in the Australia Telescope 20 GHz (AT20G) survey. The catalogue spans the declination range [-90deg, -40deg] and was constructed from four 24-h very long baseline interferometry (VLBI) observing sessions with the Australian Long Baseline Array at 8.3 GHz. The VLBI detection rate in these experiments is 97 per cent, the median uncertainty of the source positions is 2.6 mas and the median correlated flux density on projected baselines longer than 1000 km is 0.14 Jy. The goals of this work are (1) to provide a pool of southern sources with positions accurate to a few milliarcsec, which can be used for phase-referencing observations, geodetic VLBI and space navigation; (2) to extend the complete flux-limited sample of compact extragalactic sources to the Southern hemisphere; and (3) to investigate the parsec-scale properties of high-frequency selected sources from the AT20G survey. As a result of this VLBI campaign, the number of compact radio sources south of declination -40deg which have measured VLBI correlated flux densities and positions known to milliarcsec accuracy has increased by a factor of 3.5.

Catalogue of Icelandic Volcanoes

NASA Astrophysics Data System (ADS)

Ilyinskaya, Evgenia; Larsen, Gudrun; Gudmundsson, Magnus T.; Vogfjord, Kristin; Pagneux, Emmanuel; Oddsson, Bjorn; Barsotti, Sara; Karlsdottir, Sigrun

2016-04-01

The Catalogue of Icelandic Volcanoes is a newly developed open-access web resource in English intended to serve as an official source of information about active volcanoes in Iceland and their characteristics. The Catalogue forms a part of an integrated volcanic risk assessment project in Iceland GOSVÁ (commenced in 2012), as well as being part of the effort of FUTUREVOLC (2012-2016) on establishing an Icelandic volcano supersite. Volcanic activity in Iceland occurs on volcanic systems that usually comprise a central volcano and fissure swarm. Over 30 systems have been active during the Holocene (the time since the end of the last glaciation - approximately the last 11,500 years). In the last 50 years, over 20 eruptions have occurred in Iceland displaying very varied activity in terms of eruption styles, eruptive environments, eruptive products and the distribution lava and tephra. Although basaltic eruptions are most common, the majority of eruptions are explosive, not the least due to magma-water interaction in ice-covered volcanoes. Extensive research has taken place on Icelandic volcanism, and the results reported in numerous scientific papers and other publications. In 2010, the International Civil Aviation Organisation (ICAO) funded a 3 year project to collate the current state of knowledge and create a comprehensive catalogue readily available to decision makers, stakeholders and the general public. The work on the Catalogue began in 2011, and was then further supported by the Icelandic government and the EU through the FP7 project FUTUREVOLC. The Catalogue of Icelandic Volcanoes is a collaboration of the Icelandic Meteorological Office (the state volcano observatory), the Institute of Earth Sciences at the University of Iceland, and the Civil Protection Department of the National Commissioner of the Iceland Police, with contributions from a large number of specialists in Iceland and elsewhere. The Catalogue is built up of chapters with texts and various mapped information for each of the 32 volcanic systems. The contributions can be classified into three types: 1. Text and other material (including maps and tephra grain size data) on geological aspects and eruption history. This constitutes the bulk of the information presented in the catalogue. 2. Sub-chapters on current alert level and activity status for each volcanic system, updated automatically with information from the IMO monitoring network. 3. Sub-chapters on eruption scenarios, based on the eruption history. We will showcase the newly opened Catalogue web resource at EGU 2016.

International Natural Gas Model 2011, Model Documentation Report

EIA Publications

2013-01-01

This report documents the objectives, analytical approach and development of the International Natural Gas Model (INGM). It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

Towards a Next-Generation Catalogue Cross-Match Service

NASA Astrophysics Data System (ADS)

Pineau, F.; Boch, T.; Derriere, S.; Arches Consortium

2015-09-01

We have been developing in the past several catalogue cross-match tools. On one hand the CDS XMatch service (Pineau et al. 2011), able to perform basic but very efficient cross-matches, scalable to the largest catalogues on a single regular server. On the other hand, as part of the European project ARCHES1, we have been developing a generic and flexible tool which performs potentially complex multi-catalogue cross-matches and which computes probabilities of association based on a novel statistical framework. Although the two approaches have been managed so far as different tracks, the need for next generation cross-match services dealing with both efficiency and complexity is becoming pressing with forthcoming projects which will produce huge high quality catalogues. We are addressing this challenge which is both theoretical and technical. In ARCHES we generalize to N catalogues the candidate selection criteria - based on the chi-square distribution - described in Pineau et al. (2011). We formulate and test a number of Bayesian hypothesis which necessarily increases dramatically with the number of catalogues. To assign a probability to each hypotheses, we rely on estimated priors which account for local densities of sources. We validated our developments by comparing the theoretical curves we derived with the results of Monte-Carlo simulations. The current prototype is able to take into account heterogeneous positional errors, object extension and proper motion. The technical complexity is managed by OO programming design patterns and SQL-like functionalities. Large tasks are split into smaller independent pieces for scalability. Performances are achieved resorting to multi-threading, sequential reads and several tree data-structures. In addition to kd-trees, we account for heterogeneous positional errors and object's extension using M-trees. Proper-motions are supported using a modified M-tree we developed, inspired from Time Parametrized R-trees (TPR-tree). Quantitative tests in comparison with the basic cross-match will be presented.

Photometric brown-dwarf classification. I. A method to identify and accurately classify large samples of brown dwarfs without spectroscopy

NASA Astrophysics Data System (ADS)

Skrzypek, N.; Warren, S. J.; Faherty, J. K.; Mortlock, D. J.; Burgasser, A. J.; Hewett, P. C.

2015-02-01

Aims: We present a method, named photo-type, to identify and accurately classify L and T dwarfs onto the standard spectral classification system using photometry alone. This enables the creation of large and deep homogeneous samples of these objects efficiently, without the need for spectroscopy. Methods: We created a catalogue of point sources with photometry in 8 bands, ranging from 0.75 to 4.6 μm, selected from an area of 3344 deg2, by combining SDSS, UKIDSS LAS, and WISE data. Sources with 13.0 0.8, were then classified by comparison against template colours of quasars, stars, and brown dwarfs. The L and T templates, spectral types L0 to T8, were created by identifying previously known sources with spectroscopic classifications, and fitting polynomial relations between colour and spectral type. Results: Of the 192 known L and T dwarfs with reliable photometry in the surveyed area and magnitude range, 189 are recovered by our selection and classification method. We have quantified the accuracy of the classification method both externally, with spectroscopy, and internally, by creating synthetic catalogues and accounting for the uncertainties. We find that, brighter than J = 17.5, photo-type classifications are accurate to one spectral sub-type, and are therefore competitive with spectroscopic classifications. The resultant catalogue of 1157 L and T dwarfs will be presented in a companion paper.

A novel approach for characterizing broad-band radio spectral energy distributions

NASA Astrophysics Data System (ADS)

Harvey, V. M.; Franzen, T.; Morgan, J.; Seymour, N.

2018-05-01

We present a new broad-band radio frequency catalogue across 0.12 GHz ≤ ν ≤ 20 GHz created by combining data from the Murchison Widefield Array Commissioning Survey, the Australia Telescope 20 GHz survey, and the literature. Our catalogue consists of 1285 sources limited by S20 GHz > 40 mJy at 5σ, and contains flux density measurements (or estimates) and uncertainties at 0.074, 0.080, 0.119, 0.150, 0.180, 0.408, 0.843, 1.4, 4.8, 8.6, and 20 GHz. We fit a second-order polynomial in log-log space to the spectral energy distributions of all these sources in order to characterize their broad-band emission. For the 994 sources that are well described by a linear or quadratic model we present a new diagnostic plot arranging sources by the linear and curvature terms. We demonstrate the advantages of such a plot over the traditional radio colour-colour diagram. We also present astrophysical descriptions of the sources found in each segment of this new parameter space and discuss the utility of these plots in the upcoming era of large area, deep, broad-band radio surveys.

The RBV metadata catalog

NASA Astrophysics Data System (ADS)

Andre, Francois; Fleury, Laurence; Gaillardet, Jerome; Nord, Guillaume

2015-04-01

RBV (Réseau des Bassins Versants) is a French initiative to consolidate the national efforts made by more than 15 elementary observatories funded by various research institutions (CNRS, INRA, IRD, IRSTEA, Universities) that study river and drainage basins. The RBV Metadata Catalogue aims at giving an unified vision of the work produced by every observatory to both the members of the RBV network and any external person interested by this domain of research. Another goal is to share this information with other existing metadata portals. Metadata management is heterogeneous among observatories ranging from absence to mature harvestable catalogues. Here, we would like to explain the strategy used to design a state of the art catalogue facing this situation. Main features are as follows : - Multiple input methods: Metadata records in the catalog can either be entered with the graphical user interface, harvested from an existing catalogue or imported from information system through simplified web services. - Hierarchical levels: Metadata records may describe either an observatory, one of its experimental site or a single dataset produced by one instrument. - Multilingualism: Metadata can be easily entered in several configurable languages. - Compliance to standards : the backoffice part of the catalogue is based on a CSW metadata server (Geosource) which ensures ISO19115 compatibility and the ability of being harvested (globally or partially). On going tasks focus on the use of SKOS thesaurus and SensorML description of the sensors. - Ergonomy : The user interface is built with the GWT Framework to offer a rich client application with a fully ajaxified navigation. - Source code sharing : The work has led to the development of reusable components which can be used to quickly create new metadata forms in other GWT applications You can visit the catalogue (http://portailrbv.sedoo.fr/) or contact us by email rbv@sedoo.fr.

VVV high proper motion stars - I. The catalogue of bright KS ≤ 13.5 stars

NASA Astrophysics Data System (ADS)

Kurtev, R.; Gromadzki, M.; Beamín, J. C.; Folkes, S. L.; Pena Ramirez, K.; Ivanov, V. D.; Borissova, J.; Villanueva, V.; Minniti, D.; Mendez, R.; Lucas, P. W.; Smith, L. C.; Pinfield, D. J.; Kuhn, M. A.; Jones, H. R. A.; Antonova, A.; Yip, A. K. P.

2017-01-01

Knowledge of the stellar content near the Sun is important for a broad range of topics ranging from the search for planets to the study of Milky Way (MW) structure. The most powerful method for identifying potentially nearby stars is proper motion (PM) surveys. All old optical surveys avoid, or are at least substantially incomplete, near the Galactic plane. The depth and breadth of the `VISTA Variables in Vía Láctea' (VVV) near-IR survey significantly improves this situation. Taking advantage of the VVV survey data base, we have measured PMs in the densest regions of the MW bulge and southern plane in order to complete the census of nearby objects. We have developed a custom PM pipeline based on VVV catalogues from the Cambridge Astronomy Survey Unit, by comparing the first epoch of JHKS with the multi-epoch KS bands acquired later. Taking advantage of the large time baseline between the Two Micron All Sky Survey (2MASS) and the VVV observations, we also obtained 2MASS-VVV PMs. We present a near-IR PM catalogue for the whole area of the VVV survey, which includes 3003 moving stellar sources. All of these have been visually inspected and are real PM objects. Our catalogue is in very good agreement with the PM data supplied in IR catalogues outside the densest zone of the MW. The majority of the PM objects in our catalogue are nearby M-dwarfs, as expected. This new data base allows us to identify 57 common PM binary candidates, among which are two new systems within 30 pc of the Sun.

Residential Demand Module - NEMS Documentation

EIA Publications

2017-01-01

Model Documentation - Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Residential Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, and FORTRAN source code.

K2 Variable Catalogue: Variable stars and eclipsing binaries in K2 campaigns 1 and 0

NASA Astrophysics Data System (ADS)

Armstrong, D. J.; Kirk, J.; Lam, K. W. F.; McCormac, J.; Walker, S. R.; Brown, D. J. A.; Osborn, H. P.; Pollacco, D. L.; Spake, J.

2015-07-01

Aims: We have created a catalogue of variable stars found from a search of the publicly available K2 mission data from Campaigns 1 and 0. This catalogue provides the identifiers of 8395 variable stars, including 199 candidate eclipsing binaries with periods up to 60 d and 3871 periodic or quasi-periodic objects, with periods up to 20 d for Campaign 1 and 15 d for Campaign 0. Methods: Lightcurves are extracted and detrended from the available data. These are searched using a combination of algorithmic and human classification, leading to a classifier for each object as an eclipsing binary, sinusoidal periodic, quasi periodic, or aperiodic variable. The source of the variability is not identified, but could arise in the non-eclipsing binary cases from pulsation or stellar activity. Each object is cross-matched against variable star related guest observer proposals to the K2 mission, which specifies the variable type in some cases. The detrended lightcurves are also compared to lightcurves currently publicly available. Results: The resulting catalogue gives the ID, type, period, semi-amplitude, and range of the variation seen. We also make available the detrended lightcurves for each object. The catalogue is available at http://deneb.astro.warwick.ac.uk/phrlbj/k2varcat/ and at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/579/A19

AGN classification for X-ray sources in the 105 month Swift/BAT survey

NASA Astrophysics Data System (ADS)

Masetti, N.; Bassani, L.; Palazzi, E.; Malizia, A.; Stephen, J. B.; Ubertini, P.

2018-03-01

We here provide classifications for 8 hard X-ray sources listed as 'unknown AGN' in the 105 month Swift/BAT all-sky survey catalogue (Oh et al. 2018, ApJS, 235, 4). The corresponding optical spectra were extracted from the 6dF Galaxy Survey (Jones et al. 2009, MNRAS, 399, 683).

Open-Source Tools for Enhancing Full-Text Searching of OPACs: Use of Koha, Greenstone and Fedora

ERIC Educational Resources Information Center

Anuradha, K. T.; Sivakaminathan, R.; Kumar, P. Arun

2011-01-01

Purpose: There are many library automation packages available as open-source software, comprising two modules: staff-client module and online public access catalogue (OPAC). Although the OPAC of these library automation packages provides advanced features of searching and retrieval of bibliographic records, none of them facilitate full-text…

VizieR Online Data Catalog: Reference Catalogue of Bright Galaxies (RC1; de Vaucouleurs+ 1964)

NASA Astrophysics Data System (ADS)

de Vaucouleurs, G.; de Vaucouleurs, A.

1995-11-01

The Reference Catalogue of Bright Galaxies lists for each entry the following information: NGC number, IC number, or A number; A, B, or C designation; B1950.0 positions, position at 100 year precession; galactic and supergalactic positions; revised morphological type and source; type and color class in Yerkes list 1 and 2; Hubble-Sandage type; revised Hubble type according to Holmberg; logarithm of mean major diameter (log D) and ratio of major to minor diameter (log R) and their weights; logarithm of major diameter; sources of the diameters; David Dunlap Observatory type and luminosity class; Harvard photographic apparent magnitude; weight of V, B-V(0), U-B(0); integrated magnitude B(0) and its weight in the B system; mean surface brightness in magnitude per square minute of arc and sources for the B magnitude; mean B surface brightness derived from corrected Harvard magnitude; the integrated color index in the standard B-V system; "intrinsic" color index; sources of B-V and/or U-B; integrated color in the standard U-B system; observed radial velocity in km/sec; radial velocity corrected for solar motion in km/sec; sources of radial velocities; solar motion correction; and direct photographic source. The catalog was created by concatenating four files side by side. (1 data file).

The VLA-COSMOS Survey - V. 324 MHz continuum observations

NASA Astrophysics Data System (ADS)

Smolčić, Vernesa; Ciliegi, Paolo; Jelić, Vibor; Bondi, Marco; Schinnerer, Eva; Carilli, Chris L.; Riechers, Dominik A.; Salvato, Mara; Brković, Alen; Capak, Peter; Ilbert, Olivier; Karim, Alexander; McCracken, Henry; Scoville, Nick Z.

2014-09-01

We present 90 cm Very Large Array imaging of the COSMOS field, comprising a circular area of 3.14 square degrees at 8.0arcsec × 6.0arcsec angular resolution with an average rms of 0.5 mJy beam-1. The extracted catalogue contains 182 sources (down to 5.5σ), 30 of which are multicomponent sources. Using Monte Carlo artificial source simulations, we derive the completeness of the catalogue, and we show that our 90 cm source counts agree very well with those from previous studies. Using X-ray, NUV-NIR and radio COSMOS data to investigate the population mix of our 90 cm radio sample, we find that our sample is dominated by active galactic nuclei. The average 90-20 cm spectral index (Sν ∝ να, where Sν is the flux density at frequency ν and α the spectral index) of our 90 cm selected sources is -0.70, with an interquartile range from -0.90 to -0.53. Only a few ultra-steep-spectrum sources are present in our sample, consistent with results in the literature for similar fields. Our data do not show clear steepening of the spectral index with redshift. Nevertheless, our sample suggests that sources with spectral indices steeper than -1 all lie at z ≳ 1, in agreement with the idea that ultra-steep-spectrum radio sources may trace intermediate-redshift galaxies (z ≳ 1).

Orbit of Comet C/1850 Q1 (Bond)

NASA Astrophysics Data System (ADS)

Branham, Richard L., Jr.

Comet C/1850 Q1 (Bond) is one of a number of comets catalogued with parabolic orbits. Given that there are sufficient observations, 104in right ascension and 103in declination, it proves possible to calculate a better orbit. Some of the difficulties of working with 19th century observations, which show considerable scatter, are discussed. Rectangular coordinates, both of the comet and the Sun, are interpolated by a recursive version of Aitken's method, rendering unnecessary the need to specify an order for the interpolation. Comet Bond's orbit is slightly hyperbolic.

Documentation for the machine-readable version of the Survey of the Astrographic Catalogue From 1 to 31 Degrees of Northern Declination (Fresneau 1983)

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1983-01-01

A description of the machine readable catalog, including detailed format and tape file characteristics, is given. The machine file is a computation of mean values for position and magnitude at a mean epoch of observation for each unique star in the Oxford, Paris, Bordeaux, Toulouse and Northern Hemisphere Algiers zone. The format was changed to effect more efficient data searching by position and additional duplicate entries were removed. The final catalog contains data for 997311 stars.

A general spectral method for the numerical simulation of one-dimensional interacting fermions

NASA Astrophysics Data System (ADS)

Clason, Christian; von Winckel, Gregory

2012-08-01

This software implements a general framework for the direct numerical simulation of systems of interacting fermions in one spatial dimension. The approach is based on a specially adapted nodal spectral Galerkin method, where the basis functions are constructed to obey the antisymmetry relations of fermionic wave functions. An efficient Matlab program for the assembly of the stiffness and potential matrices is presented, which exploits the combinatorial structure of the sparsity pattern arising from this discretization to achieve optimal run-time complexity. This program allows the accurate discretization of systems with multiple fermions subject to arbitrary potentials, e.g., for verifying the accuracy of multi-particle approximations such as Hartree-Fock in the few-particle limit. It can be used for eigenvalue computations or numerical solutions of the time-dependent Schrödinger equation. The new version includes a Python implementation of the presented approach. New version program summaryProgram title: assembleFermiMatrix Catalogue identifier: AEKO_v1_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKO_v1_1.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 332 No. of bytes in distributed program, including test data, etc.: 5418 Distribution format: tar.gz Programming language: MATLAB/GNU Octave, Python Computer: Any architecture supported by MATLAB, GNU Octave or Python Operating system: Any supported by MATLAB, GNU Octave or Python RAM: Depends on the data Classification: 4.3, 2.2. External routines: Python 2.7+, NumPy 1.3+, SciPy 0.10+ Catalogue identifier of previous version: AEKO_v1_0 Journal reference of previous version: Comput. Phys. Commun. 183 (2012) 405 Does the new version supersede the previous version?: Yes Nature of problem: The direct numerical solution of the multi-particle one-dimensional Schrödinger equation in a quantum well is challenging due to the exponential growth in the number of degrees of freedom with increasing particles. Solution method: A nodal spectral Galerkin scheme is used where the basis functions are constructed to obey the antisymmetry relations of the fermionic wave function. The assembly of these matrices is performed efficiently by exploiting the combinatorial structure of the sparsity patterns. Reasons for new version: A Python implementation is now included. Summary of revisions: Added a Python implementation; small documentation fixes in Matlab implementation. No change in features of the package. Restrictions: Only one-dimensional computational domains with homogeneous Dirichlet or periodic boundary conditions are supported. Running time: Seconds to minutes.

World Energy Projection System Plus Model Documentation: Coal Module

EIA Publications

2011-01-01

This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Coal Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

World Energy Projection System Plus Model Documentation: Transportation Module

EIA Publications

2017-01-01

This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) International Transportation model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

World Energy Projection System Plus Model Documentation: Residential Module

EIA Publications

2016-01-01

This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Residential Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

World Energy Projection System Plus Model Documentation: Refinery Module

EIA Publications

2016-01-01

This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Refinery Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

World Energy Projection System Plus Model Documentation: Main Module

EIA Publications

2016-01-01

This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Main Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

Transportation Sector Module - NEMS Documentation

EIA Publications

2017-01-01

Documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Transportation Model (TRAN). The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated by the model.

World Energy Projection System Plus Model Documentation: Electricity Module

EIA Publications

2017-01-01

This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) World Electricity Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

Variability search in M 31 using principal component analysis and the Hubble Source Catalogue

NASA Astrophysics Data System (ADS)

Moretti, M. I.; Hatzidimitriou, D.; Karampelas, A.; Sokolovsky, K. V.; Bonanos, A. Z.; Gavras, P.; Yang, M.

2018-06-01

Principal component analysis (PCA) is being extensively used in Astronomy but not yet exhaustively exploited for variability search. The aim of this work is to investigate the effectiveness of using the PCA as a method to search for variable stars in large photometric data sets. We apply PCA to variability indices computed for light curves of 18 152 stars in three fields in M 31 extracted from the Hubble Source Catalogue. The projection of the data into the principal components is used as a stellar variability detection and classification tool, capable of distinguishing between RR Lyrae stars, long-period variables (LPVs) and non-variables. This projection recovered more than 90 per cent of the known variables and revealed 38 previously unknown variable stars (about 30 per cent more), all LPVs except for one object of uncertain variability type. We conclude that this methodology can indeed successfully identify candidate variable stars.

VizieR Online Data Catalog: Local Group dSph radio survey with ATCA (Regis+, 2015)

NASA Astrophysics Data System (ADS)

Regis, M.; Richter, L.; Colafrancesco, S.; Massardi, M.; De Blok, W. J. G.; Profumo, S.; Orford, N.

2015-09-01

We present a catalogue of radio sources detected in the fields of six dwarf spheroidal galaxies of the Local Group, which are Carina, Fornax, Sculptor, BootesII, Segue2, and Hercules. Observations were performed during July/August 2011 with the six 22-m diameter Australia Telescope Compact Array antennae operating at 16cm wavelength. We mosaicked a region of radius of about one degree around the first three dwarfs, and of about half of degree around the last three dwarfs. The rms noise level is below 0.05mJy. The restoring beams FWHM ranged from 4.2x2.5-arcseconds to 30.0x2.1-arcseconds in the most elongated case. The catalogue includes different parameters describing 1835 entries which, in our classification, correspond to 1392 sources. See the publication for more details. (1 data file).

Radio-loud AGN through the eyes of 3XMM, WISE and FIRST/NVSS

NASA Astrophysics Data System (ADS)

Mingo, B.

2014-07-01

We present the results from a new radio-loud AGN sample, obtained through the cross-correlation between the 3XMM, WISE and FIRST/NVSS catalogues. The radio selection allows us to eliminate the restrictions traditionally associated with mid-IR and X-ray sample selections, and to explore the population of lower luminosity AGN, in which the host galaxy contribution is substantial. We investigate the correlations between radio, mid-IR and X-ray emission associated to both stellar and AGN activity, and whether they can be disentangled. This work has been carried out as part of the ARCHES project. ARCHES (Astronomical Resource Cross-matching for High Energy Studies), funded within the EU/FP7-Cooperation Space framework, is a project which aims to produce well-characterised multi-wavelength data for large samples of sources drawn from the 3XMM serendipitous source catalogue.

Deep 3-GHz observations of the Lockman Hole North with the Very Large Array - I. Source extraction and uncertainty analysis

NASA Astrophysics Data System (ADS)

Vernstrom, T.; Scott, Douglas; Wall, J. V.; Condon, J. J.; Cotton, W. D.; Perley, R. A.

2016-09-01

This is the first of two papers describing the observations and cataloguing of deep 3-GHz observations of the Lockman Hole North using the Karl G. Jansky Very Large Array. The aim of this paper is to investigate, through the use of simulated images, the uncertainties and accuracy of source-finding routines, as well as to quantify systematic effects due to resolution, such as source confusion and source size. While these effects are not new, this work is intended as a particular case study that can be scaled and translated to other surveys. We use the simulations to derive uncertainties in the fitted parameters, as well as bias corrections for the actual catalogue (presented in Paper II). We compare two different source-finding routines, OBIT and AEGEAN, and two different effective resolutions, 8 and 2.75 arcsec. We find that the two routines perform comparably well, with OBIT being slightly better at de-blending sources, but slightly worse at fitting resolved sources. We show that 30-70 per cent of sources are missed or fit inaccurately once the source size becomes larger than the beam, possibly explaining source count errors in high-resolution surveys. We also investigate the effect of blending, finding that any sources with separations smaller than the beam size are fit as single sources. We show that the use of machine-learning techniques can correctly identify blended sources up to 90 per cent of the time, and prior-driven fitting can lead to a 70 per cent improvement in the number of de-blended sources.

6.5 Years of Slow Slip Events in Cascadia: A Catalogue of SSE Surface Expressions, Interface Slip Distributions, Event Magnitudes and Relationship to Tremor.

NASA Astrophysics Data System (ADS)

Dimitrova, L. L.; Wallace, L. M.; Haines, A. J.; Bartlow, N. M.

2015-12-01

Slow slip events (SSEs) in Cascadia occur at ~30-50 km depth, every 10-19 months, and typically involve slip of a few cm, producing surface displacements on the order of a few mm up to ~1cm. Are there smaller SSE signals that are currently not recognized geodetically? What is the spatial, temporal and size distribution of SSEs, and how are SSE related to tremor? We address these questions with a catalogue of all detectable SSEs spanning the last 6.5 years using a new methodology based on Vertical Derivatives of Horizontal Stress (VDoHS) rates obtained from cGPS times series. VDoHS rates, calculated by solving the force balance equations at the Earth's surface, represent the most inclusive and spatially compact surface expressions of subsurface deformation sources: VDoHS rate vectors are tightly localized above the sources and point in the direction of push or pull. We compare our results with those from the Network Inversion Filter (NIF) for selected events. We identify and characterize a spectrum of SSEs, including events with moment release at least two orders of magnitudes smaller than has been previously identified with GPS data. We catalogue events timing, interface slip distribution and moment release, and compare our results with existing tremor catalogues. VDoHS rates also reveal the boundaries between the locked and unlocked portions of the megathrust, and we can track how this varies throughout the SSE cycle. Above the locked interface, the pull of the subducted plate generates shear tractions in the overlying plate in the direction of subduction, while above the creeping section shear tractions are in the opposite direction, which is reflected in the VDoHS rates. We show that sections of the Cascadia megathrust unlock prior to some SSEs and lock thereafter, with the locked zone propagating downdip and eastward after the SSEs over weeks to months. The catalogue and movies of events will be available at http://www.ig.utexas.edu/people/staff/lada/SSEs.

VizieR Online Data Catalog: Fermi/non-Fermi blazars jet power and accretion (Chen+, 2015)

NASA Astrophysics Data System (ADS)

Chen, Y. Y.; Zhang, X.; Zhang, H. J.; Yu, X. L.

2017-11-01

We selected the sample using radio catalogues to get the widest possible sample of blazars based on their radio properties. We split them into Fermi-detected sources and non-Fermi detections. Massaro et al. (2009, J/A+A/495/691) created the "Multifrequency Catalogue of Blazars" (Roma-BZCAT), which classifies blazars into three main groups based on their spectral properties. In total, we have a sample containing 177 clean Fermi blazars (96 Fermi FSRQs and 81 Fermi BL Lacs) and 133 non-Fermi blazars (105 non-Fermi FSRQs and 28 non-Fermi BL Lacs). (2 data files).

VizieR Online Data Catalog: SPIRE observations of Herschel-BAT sample (Shimizu+, 2016)

NASA Astrophysics Data System (ADS)

Shimizu, T. T.; Melendez, M.; Mushotzky, R. F.; Koss, M. J.; Barger, A. J.; Cowie, L. L.

2016-09-01

We selected our sample of 313 AGN from the 58 month Swift/BAT Catalogue (https://swift.gsfc.nasa.gov/results/bs58mon) (Baumgartner et al., 2012, in prep.), imposing a redshift cutoff of z<0.05. All different types of AGN were chosen only excluding Blazars/BL Lac objects which most likely introduce complicated beaming effects. To determine their AGN type, for 252 sources we used the classifications from the BAT AGN Spectroscopic Survey (Koss et al., in preparation) which compiled and analysed optical spectra for the Swift/BAT 70 month catalogue (Berney et al., 2015MNRAS.454.3622B). (2 data files).

Searching for propeller-phase ULXs in the XMM-Newton Serendipitous Source Catalogue

NASA Astrophysics Data System (ADS)

Earnshaw, H. P.; Roberts, T. P.; Sathyaprakash, R.

2018-05-01

We search for transient sources in a sample of ultraluminous X-ray sources (ULXs) from the 3XMM-DR4 release of the XMM-Newton Serendipitous Source Catalogue in order to find candidate neutron star ULXs alternating between an accreting state and the propeller regime, in which the luminosity drops dramatically. By examining their fluxes and flux upper limits, we identify five ULXs that demonstrate long-term variability of over an order of magnitude. Using Chandra and Swift data to further characterize their light curves, we find that two of these sources are detected only once and could be X-ray binaries in outburst that only briefly reach ULX luminosities. Two others are consistent with being super-Eddington accreting sources with high levels of inter-observation variability. One source, M51 ULX-4, demonstrates apparent bimodal flux behaviour that could indicate the propeller regime. It has a hard X-ray spectrum, but no significant pulsations in its timing data, although with an upper limit of 10 per cent of the signal pulsed at ˜1.5 Hz a pulsating ULX cannot be excluded, particularly if the pulsations are transient. By simulating XMM-Newton observations of a population of pulsating ULXs, we predict that there could be approximately 200 other bimodal ULXs that have not been observed sufficiently well by XMM-Newton to be identified as transient.

Galactic cold cores. IV. Cold submillimetre sources: catalogue and statistical analysis

NASA Astrophysics Data System (ADS)

Montillaud, J.; Juvela, M.; Rivera-Ingraham, A.; Malinen, J.; Pelkonen, V.-M.; Ristorcelli, I.; Montier, L.; Marshall, D. J.; Marton, G.; Pagani, L.; Toth, L. V.; Zahorecz, S.; Ysard, N.; McGehee, P.; Paladini, R.; Falgarone, E.; Bernard, J.-P.; Motte, F.; Zavagno, A.; Doi, Y.

2015-12-01

Context. For the project Galactic cold cores, Herschel photometric observations were carried out as a follow-up of cold regions of interstellar clouds previously identified with the Planck satellite. The aim of the project is to derive the physical properties of the population of cold sources and to study its connection to ongoing and future star formation. Aims: We build a catalogue of cold sources within the clouds in 116 fields observed with the Herschel PACS and SPIRE instruments. We wish to determine the general physical characteristics of the cold sources and to examine the correlations with their host cloud properties. Methods: From Herschel data, we computed colour temperature and column density maps of the fields. We estimated the distance to the target clouds and provide both uncertainties and reliability flags for the distances. The getsources multiwavelength source extraction algorithm was employed to build a catalogue of several thousand cold sources. Mid-infrared data were used, along with colour and position criteria, to separate starless and protostellar sources. We also propose another classification method based on submillimetre temperature profiles. We analysed the statistical distributions of the physical properties of the source samples. Results: We provide a catalogue of ~4000 cold sources within or near star forming clouds, most of which are located either in nearby molecular complexes (≲1 kpc) or in star forming regions of the nearby galactic arms (~2 kpc). About 70% of the sources have a size compatible with an individual core, and 35% of those sources are likely to be gravitationally bound. Significant statistical differences in physical properties are found between starless and protostellar sources, in column density versus dust temperature, mass versus size, and mass versus dust temperature diagrams. The core mass functions are very similar to those previously reported for other regions. On statistical grounds we find that gravitationally bound sources have higher background column densities (median Nbg(H2) ~ 5 × 1021 cm-2) than unbound sources (median Nbg(H2) ~ 3 × 1021 cm-2). These values of Nbg(H2) are higher for higher dust temperatures of the external layers of the parent cloud. However, only in a few cases do we find clear Nbg(H2) thresholds for the presence of cores. The dust temperatures of cloud external layers show clear variations with galactic location, as may the source temperatures. Conclusions: Our data support a more complex view of star formation than in the simple idea of a column density threshold. They show a clear influence of the surrounding UV-visible radiation on how cores distribute in their host clouds with possible variations on the Galactic scale. Planck (http://www.esa.int/Planck) is a project of the European Space Agency - ESA - with instruments provided by two scientific consortia funded by ESA member states (in particular the lead countries: France and Italy) with contributions from NASA (USA), and telescope reflectors provided in a collaboration between ESA and a scientific consortium led and funded by Denmark.Herschel is an ESA space observatory with science instruments provided by European-led Principal Investigator consortia and with important participation from NASA.Full Table B.1 is only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/584/A92

Extensions of the framework for evaluation of crater detection algorithms: new ground truth catalogue with 57633 craters, additional subsystems and evaluations

NASA Astrophysics Data System (ADS)

Salamunićcar, Goran

Crater detection algorithms' (CDAs) applications range from approximating the age of a planetary surface and autonomous landing to planets and asteroids to advanced statistical analyses [ASR, 33, 2281-2287]. A large amount of work on CDAs has already been published. However, problems arise when evaluation results of some new CDA have to be compared with already published evaluation results. The Framework for Evaluation of Crater Detection Algorithms (FECDA) was recently proposed as an initial step for solving the problem of objective evaluation of CDAs [ASR, in press, doi:10.1016/j.asr.2007.04.028]. The framework includes: (1) a definition of the measure for differences between craters; (2) test-field topography based on the 1/64° MOLA data; (3) the Ground Truth (GT) catalogue wherein each of 17582 impact craters is aligned with MOLA data and confirmed with catalogues by N. G. Barlow et al. and J. F. Rodionova et al.; (4) selection of methodology for training and testing; and (5) a Free-response Receiver Operating Characteristics (F-ROC) curves as a way to measure CDA performance. Recently, the GT catalogue with 17582 craters has been improved using cross-analysis. The result is a more complete GT catalogue with 18711 impact craters [7thMars abstract 3067]. Once this is done, the integration with Barlow, Rodionova, Boyce, Kuzmin and the catalogue from our previous work has been completed by merging. The result is even more complete GT catalogue with 57633 impact craters [39thLPS abstract 1372]. All craters from the resulting GT catalogue have been additionally registered, using 1/128° MOLA data as bases, with 1/256° THEMIS-DIR, 1/256° MDIM and 1/256° MOC data-sets. Thanks to that, the GT catalogue can also be used with these additional subsystems, so the FECDA can be extended with them. Part of the FECDA is also the Craters open-source C++ project. It already contains a number of implemented CDAs [38thLPS abstract 1351, 7thMars abstract 3066, 39thLPS abstracts 1375 and 1378]. It supports Visual Studio 6.0, Visual Studio 8.0, 32-bit as well as 64-bit platforms, and parallel execution of already implemented algorithms on 2, 3, or 4 CPU cores. Currently of particular interest is also extension of the Topolyzer application, which is provided as a part of the FECDA as a tool for evaluation of craters' catalogues and drawing of F-ROC curves. The purpose is to provide more efficient and reliable evaluation, using the new GT catalogue which contains craters down to 1 km diameter. This is important for CDAs that have problems in detecting such small craters, e.g. because of a limitation of used data-set.

The obtaining relative position of lunar centre masses and centre of the figure in selenocentric catalogues

NASA Astrophysics Data System (ADS)

Nefedjev, Yu. A.; Valeev, S. G.; Rizvanov, N. G.; Mikeev, R. R.; Varaksina, N. Yu.

2010-05-01

The relative position of lunar center masses relative to center of the figure in Kazan and Kiev selenocentric catalogues was customized. The expansions by spherical harmonics N=5 degree and order of the lunar function h(λ, β) with using the package ASNI USTU were executed. Module of the expansion of the local area to surfaces to full sphere was used. The parameters of cosmic missions are given for comparison (SAI; Bills, Ferrari). The normalized coefficients from expansions for eight sources hypsometric information are obtained: - Clementine (N=40), - Kazan (N=5), - Kiev (N=5), - SAI (N=10; Chuikova (1975)), - Bills, Ferrari, - Каguуа (Selena, Japan mission), - ULCN (The Uuified Lunaz Control Network 2005). The displacements of the lunar centre figure relative to lunar centre of the masses were defined from equations (Chuikova (1975)). The results of the obtaining relative position of the lunar centre masses and centre of the figure in Kazan selenocentric catalogue give good agreement with modern cosmic mission data.

Detecting Nova Shells around known Cataclysmic Variable systems

NASA Astrophysics Data System (ADS)

Xhakaj, Enia; Kupfer, Thomas; Prince, Thomas A.

2017-01-01

Nova shells are hydrogen-rich nebulae around Cataclysmic Variables that are created when a Nova outburst takes place. Learning more about Nova shells can help us get a better understanding of the long-term evolution of white dwarfs in active Cataclysmic Variables. In this project, we present the search for Nova shells around 1700 Cataclysmic Variables, using Hα images from the Palomar Transient Factory (PTF) survey. The PTF Hα survey started in 2009 using the 48’’ Oschin telescope at Palomar Observatory and is the first of its type covering the whole northern hemisphere while reaching 18 mags in 60 seconds of exposure. We concentrated our search on the IAU catalogue of Historical Novae, as well as on the SDSS and the Ritter-Kolb catalogue of Cataclysmic Variables. We numerically analyzed radial profiles centered on the target sources to search for excess emission potentially associated with the shells. Out of 1700 Cataclysmic Variables present in these catalogues, we detected 25 Nova shells, out of which 20 are not observed before.

MONTRA: An agile architecture for data publishing and discovery.

PubMed

Bastião Silva, Luís; Trifan, Alina; Luís Oliveira, José

2018-07-01

Data catalogues are a common form of capturing and presenting information about a specific kind of entity (e.g. products, services, professionals, datasets, etc.). However, the construction of a web-based catalogue for a particular scenario normally implies the development of a specific and dedicated solution. In this paper, we present MONTRA, a rapid-application development framework designed to facilitate the integration and discovery of heterogeneous objects, which may be characterized by distinct data structures. MONTRA was developed following a plugin-based architecture to allow dynamic composition of services over represented datasets. The core of MONTRA's functionalities resides in a flexible data skeleton used to characterize data entities, and from which a fully-fledged web data catalogue is automatically generated, ensuring access control and data privacy. MONTRA is being successfully used by several European projects to collect and manage biomedical databases. In this paper, we describe three of these applications scenarios. This work was motivated by the plethora of geographically scattered biomedical repositories, and by the role they can play altogether for the understanding of diseases and of the real-world effectiveness of treatments. Using metadata to expose datasets' characteristics, MONTRA greatly simplifies the task of building data catalogues. The source code is publicly available at https://github.com/bioinformatics-ua/montra. Copyright © 2018 Elsevier B.V. All rights reserved.

Blazar flaring patterns (B-FlaP) classifying blazar candidate of uncertain type in the third Fermi-LAT catalogue by artificial neural networks

NASA Astrophysics Data System (ADS)

Chiaro, G.; Salvetti, D.; La Mura, G.; Giroletti, M.; Thompson, D. J.; Bastieri, D.

2016-11-01

The Fermi-Large Area Telescope (LAT) is currently the most important facility for investigating the GeV γ-ray sky. With Fermi-LAT, more than three thousand γ-ray sources have been discovered so far. 1144 (˜40 per cent) of the sources are active galaxies of the blazar class, and 573 (˜20 per cent) are listed as blazar candidate of uncertain type (BCU), or sources without a conclusive classification. We use the empirical cumulative distribution functions and the artificial neural networks for a fast method of screening and classification for BCUs based on data collected at γ-ray energies only, when rigorous multiwavelength analysis is not available. Based on our method, we classify 342 BCUs as BL Lacs and 154 as flat-spectrum radio quasars, while 77 objects remain uncertain. Moreover, radio analysis and direct observations in ground-based optical observatories are used as counterparts to the statistical classifications to validate the method. This approach is of interest because of the increasing number of unclassified sources in Fermi catalogues and because blazars and in particular their subclass high synchrotron peak objects are the main targets of atmospheric Cherenkov telescopes.

World Energy Projection System Plus Model Documentation: Greenhouse Gases Module

EIA Publications

2011-01-01

This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Greenhouse Gases Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

World Energy Projection System Plus Model Documentation: Natural Gas Module

EIA Publications

2011-01-01

This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Natural Gas Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

Potential Cost Savings Ideas for FAA and Users

DOT National Transportation Integrated Search

1997-06-04

The intent of this paper is to catalogue potential cost-savings ideas which : impact both the FAA and the aviation community. These ideas have come from : various sources including MITRE, Coopers & Lybrand (C&L), FAA studies, General : Accounting Off...

World Energy Projection System Plus Model Documentation: District Heat Module

EIA Publications

2017-01-01

This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) District Heat Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

World Energy Projection System Plus Model Documentation: Industrial Module

EIA Publications

2016-01-01

This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) World Industrial Model (WIM). It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

Hyper-Fractal Analysis: A visual tool for estimating the fractal dimension of 4D objects

NASA Astrophysics Data System (ADS)

Grossu, I. V.; Grossu, I.; Felea, D.; Besliu, C.; Jipa, Al.; Esanu, T.; Bordeianu, C. C.; Stan, E.

2013-04-01

This work presents a new version of a Visual Basic 6.0 application for estimating the fractal dimension of images and 3D objects (Grossu et al. (2010) [1]). The program was extended for working with four-dimensional objects stored in comma separated values files. This might be of interest in biomedicine, for analyzing the evolution in time of three-dimensional images. New version program summaryProgram title: Hyper-Fractal Analysis (Fractal Analysis v03) Catalogue identifier: AEEG_v3_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEG_v3_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC license, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 745761 No. of bytes in distributed program, including test data, etc.: 12544491 Distribution format: tar.gz Programming language: MS Visual Basic 6.0 Computer: PC Operating system: MS Windows 98 or later RAM: 100M Classification: 14 Catalogue identifier of previous version: AEEG_v2_0 Journal reference of previous version: Comput. Phys. Comm. 181 (2010) 831-832 Does the new version supersede the previous version? Yes Nature of problem: Estimating the fractal dimension of 4D images. Solution method: Optimized implementation of the 4D box-counting algorithm. Reasons for new version: Inspired by existing applications of 3D fractals in biomedicine [3], we extended the optimized version of the box-counting algorithm [1, 2] to the four-dimensional case. This might be of interest in analyzing the evolution in time of 3D images. The box-counting algorithm was extended in order to support 4D objects, stored in comma separated values files. A new form was added for generating 2D, 3D, and 4D test data. The application was tested on 4D objects with known dimension, e.g. the Sierpinski hypertetrahedron gasket, Df=ln(5)/ln(2) (Fig. 1). The algorithm could be extended, with minimum effort, to higher number of dimensions. Easy integration with other applications by using the very simple comma separated values file format for storing multi-dimensional images. Implementation of χ2 test as a criterion for deciding whether an object is fractal or not. User friendly graphical interface. Hyper-Fractal Analysis-Test on the Sierpinski hypertetrahedron 4D gasket (Df=ln(5)/ln(2)≅2.32). Running time: In a first approximation, the algorithm is linear [2]. References: [1] V. Grossu, D. Felea, C. Besliu, Al. Jipa, C.C. Bordeianu, E. Stan, T. Esanu, Computer Physics Communications, 181 (2010) 831-832. [2] I.V. Grossu, C. Besliu, M.V. Rusu, Al. Jipa, C. C. Bordeianu, D. Felea, Computer Physics Communications, 180 (2009) 1999-2001. [3] J. Ruiz de Miras, J. Navas, P. Villoslada, F.J. Esteban, Computer Methods and Programs in Biomedicine, 104 Issue 3 (2011) 452-460.

Source detection in astronomical images by Bayesian model comparison

NASA Astrophysics Data System (ADS)

Frean, Marcus; Friedlander, Anna; Johnston-Hollitt, Melanie; Hollitt, Christopher

2014-12-01

The next generation of radio telescopes will generate exabytes of data on hundreds of millions of objects, making automated methods for the detection of astronomical objects ("sources") essential. Of particular importance are faint, diffuse objects embedded in noise. There is a pressing need for source finding software that identifies these sources, involves little manual tuning, yet is tractable to calculate. We first give a novel image discretisation method that incorporates uncertainty about how an image should be discretised. We then propose a hierarchical prior for astronomical images, which leads to a Bayes factor indicating how well a given region conforms to a model of source that is exceptionally unconstrained, compared to a model of background. This enables the efficient localisation of regions that are "suspiciously different" from the background distribution, so our method looks not for brightness but for anomalous distributions of intensity, which is much more general. The model of background can be iteratively improved by removing the influence on it of sources as they are discovered. The approach is evaluated by identifying sources in real and simulated data, and performs well on these measures: the Bayes factor is maximized at most real objects, while returning only a moderate number of false positives. In comparison to a catalogue constructed by widely-used source detection software with manual post-processing by an astronomer, our method found a number of dim sources that were missing from the "ground truth" catalogue.

The ASTRODEEP Frontier Fields catalogues. II. Photometric redshifts and rest frame properties in Abell-2744 and MACS-J0416

NASA Astrophysics Data System (ADS)

Castellano, M.; Amorín, R.; Merlin, E.; Fontana, A.; McLure, R. J.; Mármol-Queraltó, E.; Mortlock, A.; Parsa, S.; Dunlop, J. S.; Elbaz, D.; Balestra, I.; Boucaud, A.; Bourne, N.; Boutsia, K.; Brammer, G.; Bruce, V. A.; Buitrago, F.; Capak, P.; Cappelluti, N.; Ciesla, L.; Comastri, A.; Cullen, F.; Derriere, S.; Faber, S. M.; Giallongo, E.; Grazian, A.; Grillo, C.; Mercurio, A.; Michałowski, M. J.; Nonino, M.; Paris, D.; Pentericci, L.; Pilo, S.; Rosati, P.; Santini, P.; Schreiber, C.; Shu, X.; Wang, T.

2016-05-01

Aims: We present the first public release of photometric redshifts, galaxy rest frame properties and associated magnification values in the cluster and parallel pointings of the first two Frontier Fields, Abell-2744 and MACS-J0416. The released catalogues aim to provide a reference for future investigations of extragalactic populations in these legacy fields: from lensed high-redshift galaxies to cluster members themselves. Methods: We exploit a multiwavelength catalogue, ranging from Hubble Space Telescope (HST) to ground-based K and Spitzer IRAC, which is specifically designed to enable detection and measurement of accurate fluxes in crowded cluster regions. The multiband information is used to derive photometric redshifts and physical properties of sources detected either in the H-band image alone, or from a stack of four WFC3 bands. To minimize systematics, median photometric redshifts are assembled from six different approaches to photo-z estimates. Their reliability is assessed through a comparison with available spectroscopic samples. State-of-the-art lensing models are used to derive magnification values on an object-by-object basis by taking into account sources positions and redshifts. Results: We show that photometric redshifts reach a remarkable ~3-5% accuracy. After accounting for magnification, the H-band number counts are found to be in agreement at bright magnitudes with number counts from the CANDELS fields, while extending the presently available samples to galaxies that, intrinsically, are as faint as H ~ 32-33, thanks to strong gravitational lensing. The Frontier Fields allow the galaxy stellar mass distribution to be probed, depending on magnification, at 0.5-1.5 dex lower masses with respect to extragalactic wide fields, including sources at Mstar ~ 107-108 M⊙ at z > 5. Similarly, they allow the detection of objects with intrinsic star formation rates (SFRs) >1 dex lower than in the CANDELS fields reaching 0.1-1 M⊙/yr at z ~ 6-10. The catalogues, together with the final processed images for all HST bands (as well as some diagnostic data and images), are publicly available and can be downloaded from the Astrodeep website at http://www.astrodeep.eu/frontier-fields/ and from a dedicated CDS webpage (http://astrodeep.u-strasbg.fr/ff/index.html). The catalogues are also available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/590/A31

A 20 GHz bright sample for δ > +72° - I. Catalogue

NASA Astrophysics Data System (ADS)

Righini, S.; Carretti, E.; Ricci, R.; Zanichelli, A.; Mack, K.-H.; Massardi, M.; Prandoni, I.; Procopio, P.; Verma, R.; López-Caniego, M.; Gregorini, L.; Mantovani, F.

2012-11-01

During 2010-11, the Medicina 32-m dish hosted the seven-feed 18-26.5 GHz receiver built for the Sardinia Radio Telescope, with the goal to perform its commissioning. This opportunity was exploited to carry out a pilot survey at 20 GHz over the area for δ > +72°.3. This paper describes all the phases of the observations, as they were performed using new hardware and software facilities. The map-making and source extraction procedures are illustrated. A customized data reduction tool was used during the follow-up phase, which produced a list of 73 confirmed sources down to a flux density of 115 mJy. The resulting catalogue, presented here, is complete above 200 mJy. Source counts are in agreement with those provided by the Australia Telescope 20 GHz (AT20G) survey. This pilot activity paves the way for a larger project, the K-band Northern Wide Survey (KNoWS), whose final aim is to survey the whole Northern hemisphere down to a flux limit of 50 mJy (5σ).

Selection of radio sources for Venus balloon-Pathfinder Delta-DOR navigation at 1.7 GHz

NASA Technical Reports Server (NTRS)

Liewer, K. M

1986-01-01

In order to increase the success rate of the Delta-DOR (Delta-Differential One-way Range) VLBI navigational support for the French-Soviet Venus Balloon and Halley Pathfinder projects, forty-four extragalactic radio sources were observed in advance of these projects to determine which were suitable for use as reference sources. Of these forty-four radio sources taken from the existing JPL radio source catalogue, thirty-six were determined to be of sufficient strength for use in Delta-DOR VLBI navigation.

A new catalogue of Galactic novae: investigation of the MMRD relation and spatial distribution

NASA Astrophysics Data System (ADS)

Özdönmez, Aykut; Ege, Ergün; Güver, Tolga; Ak, Tansel

2018-05-01

In this study, a new Galactic novae catalogue is introduced collecting important parameters of these sources such as their light-curve parameters, classifications, full width half-maximum (FWHM) of Hα line, distances and interstellar reddening estimates. The catalogue is also published on a website with a search option via a SQL query and an online tool to re-calculate the distance/reddening of a nova from the derived reddening-distance relations. Using the novae in the catalogue, the existence of a maximum magnitude-rate of decline (MMRD) relation in the Galaxy is investigated. Although an MMRD relation was obtained, a significant scattering in the resulting MMRD distribution still exists. We suggest that the MMRD relation likely depends on other parameters in addition to the decline time, as FWHM Hα, the light-curve shapes. Using two different samples depending on the distances in the catalogue and from the derived MMRD relation, the spatial distributions of Galactic novae as a function of their spectral and speed classes were studied. The investigation on the Galactic model parameters implies that best estimates for the local outburst density are 3.6 and 4.2 × 10-10 pc-3 yr-1 with a scale height of 148 and 175 pc, while the space density changes in the range of 0.4-16 × 10-6 pc-3. The local outburst density and scale height obtained in this study infer that the disc nova rate in the Galaxy is in the range of ˜20 to ˜100 yr-1 with an average estimate 67^{+21}_{-17} yr-1.

Wireless access to a pharmaceutical database: a demonstrator for data driven Wireless Application Protocol (WAP) applications in medical information processing.

PubMed

Schacht Hansen, M; Dørup, J

2001-01-01

The Wireless Application Protocol technology implemented in newer mobile phones has built-in facilities for handling much of the information processing needed in clinical work. To test a practical approach we ported a relational database of the Danish pharmaceutical catalogue to Wireless Application Protocol using open source freeware at all steps. We used Apache 1.3 web software on a Linux server. Data containing the Danish pharmaceutical catalogue were imported from an ASCII file into a MySQL 3.22.32 database using a Practical Extraction and Report Language script for easy update of the database. Data were distributed in 35 interrelated tables. Each pharmaceutical brand name was given its own card with links to general information about the drug, active substances, contraindications etc. Access was available through 1) browsing therapeutic groups and 2) searching for a brand name. The database interface was programmed in the server-side scripting language PHP3. A free, open source Wireless Application Protocol gateway to a pharmaceutical catalogue was established to allow dial-in access independent of commercial Wireless Application Protocol service providers. The application was tested on the Nokia 7110 and Ericsson R320s cellular phones. We have demonstrated that Wireless Application Protocol-based access to a dynamic clinical database can be established using open source freeware. The project opens perspectives for a further integration of Wireless Application Protocol phone functions in clinical information processing: Global System for Mobile communication telephony for bilateral communication, asynchronous unilateral communication via e-mail and Short Message Service, built-in calculator, calendar, personal organizer, phone number catalogue and Dictaphone function via answering machine technology. An independent Wireless Application Protocol gateway may be placed within hospital firewalls, which may be an advantage with respect to security. However, if Wireless Application Protocol phones are to become effective tools for physicians, special attention must be paid to the limitations of the devices. Input tools of Wireless Application Protocol phones should be improved, for instance by increased use of speech control.

Wireless access to a pharmaceutical database: A demonstrator for data driven Wireless Application Protocol applications in medical information processing

PubMed Central

Hansen, Michael Schacht

2001-01-01

Background The Wireless Application Protocol technology implemented in newer mobile phones has built-in facilities for handling much of the information processing needed in clinical work. Objectives To test a practical approach we ported a relational database of the Danish pharmaceutical catalogue to Wireless Application Protocol using open source freeware at all steps. Methods We used Apache 1.3 web software on a Linux server. Data containing the Danish pharmaceutical catalogue were imported from an ASCII file into a MySQL 3.22.32 database using a Practical Extraction and Report Language script for easy update of the database. Data were distributed in 35 interrelated tables. Each pharmaceutical brand name was given its own card with links to general information about the drug, active substances, contraindications etc. Access was available through 1) browsing therapeutic groups and 2) searching for a brand name. The database interface was programmed in the server-side scripting language PHP3. Results A free, open source Wireless Application Protocol gateway to a pharmaceutical catalogue was established to allow dial-in access independent of commercial Wireless Application Protocol service providers. The application was tested on the Nokia 7110 and Ericsson R320s cellular phones. Conclusions We have demonstrated that Wireless Application Protocol-based access to a dynamic clinical database can be established using open source freeware. The project opens perspectives for a further integration of Wireless Application Protocol phone functions in clinical information processing: Global System for Mobile communication telephony for bilateral communication, asynchronous unilateral communication via e-mail and Short Message Service, built-in calculator, calendar, personal organizer, phone number catalogue and Dictaphone function via answering machine technology. An independent Wireless Application Protocol gateway may be placed within hospital firewalls, which may be an advantage with respect to security. However, if Wireless Application Protocol phones are to become effective tools for physicians, special attention must be paid to the limitations of the devices. Input tools of Wireless Application Protocol phones should be improved, for instance by increased use of speech control. PMID:11720946

COOL: A code for Dynamic Monte Carlo Simulation of molecular dynamics

NASA Astrophysics Data System (ADS)

Barletta, Paolo

2012-02-01

Cool is a program to simulate evaporative and sympathetic cooling for a mixture of two gases co-trapped in an harmonic potential. The collisions involved are assumed to be exclusively elastic, and losses are due to evaporation from the trap. Each particle is followed individually in its trajectory, consequently properties such as spatial densities or energy distributions can be readily evaluated. The code can be used sequentially, by employing one output as input for another run. The code can be easily generalised to describe more complicated processes, such as the inclusion of inelastic collisions, or the possible presence of more than two species in the trap. New version program summaryProgram title: COOL Catalogue identifier: AEHJ_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHJ_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 1 097 733 No. of bytes in distributed program, including test data, etc.: 18 425 722 Distribution format: tar.gz Programming language: C++ Computer: Desktop Operating system: Linux RAM: 500 Mbytes Classification: 16.7, 23 Catalogue identifier of previous version: AEHJ_v1_0 Journal reference of previous version: Comput. Phys. Comm. 182 (2011) 388 Does the new version supersede the previous version?: Yes Nature of problem: Simulation of the sympathetic process occurring for two molecular gases co-trapped in a deep optical trap. Solution method: The Direct Simulation Monte Carlo method exploits the decoupling, over a short time period, of the inter-particle interaction from the trapping potential. The particle dynamics is thus exclusively driven by the external optical field. The rare inter-particle collisions are considered with an acceptance/rejection mechanism, that is, by comparing a random number to the collisional probability defined in terms of the inter-particle cross section and centre-of-mass energy. All particles in the trap are individually simulated so that at each time step a number of useful quantities, such as the spatial densities or the energy distributions, can be readily evaluated. Reasons for new version: A number of issues made the old version very difficult to be ported on different architectures, and impossible to compile on Windows. Furthermore, the test runs results could only be replicated poorly, as a consequence of the simulations being very sensitive to the machine background noise. In practise, as the particles are simulated for billions and billions of steps, the consequence of a small difference in the initial conditions due to the finiteness of double precision real can have macroscopic effects in the output. This is not a problem in its own right, but a feature of such simulations. However, for sake of completeness we have introduced a quadruple precision version of the code which yields the same results independently of the software used to compile it, or the hardware architecture where the code is run. Summary of revisions: A number of bugs in the dynamic memory allocation have been detected and removed, mostly in the cool.cpp file. All files have been renamed with a .cpp ending, rather than .c++, to make them compatible with Windows. The Random Number Generator routine, which is the computational core of the algorithm, has been re-written in C++, and there is no need any longer for cross FORTRAN-C++ compilation. A quadruple precision version of the code is provided alongside the original double precision one. The makefile allows the user to choose which one to compile by setting the switch PRECISION to either double or quad. The source code and header files have been organised into directories to make the code file system look neater. Restrictions: The in-trap motion of the particles is treated classically. Running time: The running time is relatively short, 1-2 hours. However it is convenient to replicate each simulation several times with different initialisations of the random sequence.

Planck 2015 results. XXVII. The second Planck catalogue of Sunyaev-Zeldovich sources

NASA Astrophysics Data System (ADS)

Planck Collaboration; Ade, P. A. R.; Aghanim, N.; Arnaud, M.; Ashdown, M.; Aumont, J.; Baccigalupi, C.; Banday, A. J.; Barreiro, R. B.; Barrena, R.; Bartlett, J. G.; Bartolo, N.; Battaner, E.; Battye, R.; Benabed, K.; Benoît, A.; Benoit-Lévy, A.; Bernard, J.-P.; Bersanelli, M.; Bielewicz, P.; Bikmaev, I.; Böhringer, H.; Bonaldi, A.; Bonavera, L.; Bond, J. R.; Borrill, J.; Bouchet, F. R.; Bucher, M.; Burenin, R.; Burigana, C.; Butler, R. C.; Calabrese, E.; Cardoso, J.-F.; Carvalho, P.; Catalano, A.; Challinor, A.; Chamballu, A.; Chary, R.-R.; Chiang, H. C.; Chon, G.; Christensen, P. R.; Clements, D. L.; Colombi, S.; Colombo, L. P. L.; Combet, C.; Comis, B.; Couchot, F.; Coulais, A.; Crill, B. P.; Curto, A.; Cuttaia, F.; Dahle, H.; Danese, L.; Davies, R. D.; Davis, R. J.; de Bernardis, P.; de Rosa, A.; de Zotti, G.; Delabrouille, J.; Désert, F.-X.; Dickinson, C.; Diego, J. M.; Dolag, K.; Dole, H.; Donzelli, S.; Doré, O.; Douspis, M.; Ducout, A.; Dupac, X.; Efstathiou, G.; Eisenhardt, P. R. M.; Elsner, F.; Enßlin, T. A.; Eriksen, H. K.; Falgarone, E.; Fergusson, J.; Feroz, F.; Ferragamo, A.; Finelli, F.; Forni, O.; Frailis, M.; Fraisse, A. A.; Franceschi, E.; Frejsel, A.; Galeotta, S.; Galli, S.; Ganga, K.; Génova-Santos, R. T.; Giard, M.; Giraud-Héraud, Y.; Gjerløw, E.; González-Nuevo, J.; Górski, K. M.; Grainge, K. J. B.; Gratton, S.; Gregorio, A.; Gruppuso, A.; Gudmundsson, J. E.; Hansen, F. K.; Hanson, D.; Harrison, D. L.; Hempel, A.; Henrot-Versillé, S.; Hernández-Monteagudo, C.; Herranz, D.; Hildebrandt, S. R.; Hivon, E.; Hobson, M.; Holmes, W. A.; Hornstrup, A.; Hovest, W.; Huffenberger, K. M.; Hurier, G.; Jaffe, A. H.; Jaffe, T. R.; Jin, T.; Jones, W. C.; Juvela, M.; Keihänen, E.; Keskitalo, R.; Khamitov, I.; Kisner, T. S.; Kneissl, R.; Knoche, J.; Kunz, M.; Kurki-Suonio, H.; Lagache, G.; Lamarre, J.-M.; Lasenby, A.; Lattanzi, M.; Lawrence, C. R.; Leonardi, R.; Lesgourgues, J.; Levrier, F.; Liguori, M.; Lilje, P. B.; Linden-Vørnle, M.; López-Caniego, M.; Lubin, P. M.; Macías-Pérez, J. F.; Maggio, G.; Maino, D.; Mak, D. S. Y.; Mandolesi, N.; Mangilli, A.; Martin, P. G.; Martínez-González, E.; Masi, S.; Matarrese, S.; Mazzotta, P.; McGehee, P.; Mei, S.; Melchiorri, A.; Melin, J.-B.; Mendes, L.; Mennella, A.; Migliaccio, M.; Mitra, S.; Miville-Deschênes, M.-A.; Moneti, A.; Montier, L.; Morgante, G.; Mortlock, D.; Moss, A.; Munshi, D.; Murphy, J. A.; Naselsky, P.; Nastasi, A.; Nati, F.; Natoli, P.; Netterfield, C. B.; Nørgaard-Nielsen, H. U.; Noviello, F.; Novikov, D.; Novikov, I.; Olamaie, M.; Oxborrow, C. A.; Paci, F.; Pagano, L.; Pajot, F.; Paoletti, D.; Pasian, F.; Patanchon, G.; Pearson, T. J.; Perdereau, O.; Perotto, L.; Perrott, Y. C.; Perrotta, F.; Pettorino, V.; Piacentini, F.; Piat, M.; Pierpaoli, E.; Pietrobon, D.; Plaszczynski, S.; Pointecouteau, E.; Polenta, G.; Pratt, G. W.; Prézeau, G.; Prunet, S.; Puget, J.-L.; Rachen, J. P.; Reach, W. T.; Rebolo, R.; Reinecke, M.; Remazeilles, M.; Renault, C.; Renzi, A.; Ristorcelli, I.; Rocha, G.; Rosset, C.; Rossetti, M.; Roudier, G.; Rozo, E.; Rubiño-Martín, J. A.; Rumsey, C.; Rusholme, B.; Rykoff, E. S.; Sandri, M.; Santos, D.; Saunders, R. D. E.; Savelainen, M.; Savini, G.; Schammel, M. P.; Scott, D.; Seiffert, M. D.; Shellard, E. P. S.; Shimwell, T. W.; Spencer, L. D.; Stanford, S. A.; Stern, D.; Stolyarov, V.; Stompor, R.; Streblyanska, A.; Sudiwala, R.; Sunyaev, R.; Sutton, D.; Suur-Uski, A.-S.; Sygnet, J.-F.; Tauber, J. A.; Terenzi, L.; Toffolatti, L.; Tomasi, M.; Tramonte, D.; Tristram, M.; Tucci, M.; Tuovinen, J.; Umana, G.; Valenziano, L.; Valiviita, J.; Van Tent, B.; Vielva, P.; Villa, F.; Wade, L. A.; Wandelt, B. D.; Wehus, I. K.; White, S. D. M.; Wright, E. L.; Yvon, D.; Zacchei, A.; Zonca, A.

2016-09-01

We present the all-sky Planck catalogue of Sunyaev-Zeldovich (SZ) sources detected from the 29 month full-mission data. The catalogue (PSZ2) is the largest SZ-selected sample of galaxy clusters yet produced and the deepest systematic all-sky surveyof galaxy clusters. It contains 1653 detections, of which 1203 are confirmed clusters with identified counterparts in external data sets, and is the first SZ-selected cluster survey containing >103 confirmed clusters. We present a detailed analysis of the survey selection function in terms of its completeness and statistical reliability, placing a lower limit of 83% on the purity. Using simulations, we find that the estimates of the SZ strength parameter Y5R500are robust to pressure-profile variation and beam systematics, but accurate conversion to Y500 requires the use of prior information on the cluster extent. We describe the multi-wavelength search for counterparts in ancillary data, which makes use of radio, microwave, infra-red, optical, and X-ray data sets, and which places emphasis on the robustness of the counterpart match. We discuss the physical properties of the new sample and identify a population of low-redshift X-ray under-luminous clusters revealed by SZ selection. These objects appear in optical and SZ surveys with consistent properties for their mass, but are almost absent from ROSAT X-ray selected samples.

Planck 2015 results: XXVII. The second Planck catalogue of Sunyaev-Zeldovich sources

DOE PAGES

Ade, P. A. R.; Aghanim, N.; Arnaud, M.; ...

2016-09-20

Here, we present the all-sky Planck catalogue of Sunyaev-Zeldovich (SZ) sources detected from the 29 month full-mission data. The catalogue (PSZ2) is the largest SZ-selected sample of galaxy clusters yet produced and the deepest systematic all-sky surveyof galaxy clusters. It contains 1653 detections, of which 1203 are confirmed clusters with identified counterparts in external data sets, and is the first SZ-selected cluster survey containing >103 confirmed clusters. We present a detailed analysis of the survey selection function in terms of its completeness and statistical reliability, placing a lower limit of 83% on the purity. Using simulations, we find that themore » estimates of the SZ strength parameter Y5R500are robust to pressure-profile variation and beam systematics, but accurate conversion to Y500 requires the use of prior information on the cluster extent. We describe the multi-wavelength search for counterparts in ancillary data, which makes use of radio, microwave, infra-red, optical, and X-ray data sets, and which places emphasis on the robustness of the counterpart match. We discuss the physical properties of the new sample and identify a population of low-redshift X-ray under-luminous clusters revealed by SZ selection. These objects appear in optical and SZ surveys with consistent properties for their mass, but are almost absent from ROSAT X-ray selected samples.« less

GT-57633 catalogue of Martian impact craters developed for evaluation of crater detection algorithms

NASA Astrophysics Data System (ADS)

Salamunićcar, Goran; Lončarić, Sven

2008-12-01

Crater detection algorithms (CDAs) are an important subject of the recent scientific research. A ground truth (GT) catalogue, which contains the locations and sizes of known craters, is important for the evaluation of CDAs in a wide range of CDA applications. Unfortunately, previous catalogues of craters by other authors cannot be easily used as GT. In this paper, we propose a method for integration of several existing catalogues to obtain a new craters catalogue. The methods developed and used during this work on the GT catalogue are: (1) initial screening of used catalogues; (2) evaluation of self-consistency of used catalogues; (3) initial registration from three different catalogues; (4) cross-evaluation of used catalogues; (5) additional registrations and registrations from additional catalogues; and (6) fine-tuning and registration with additional data-sets. During this process, all craters from all major currently available manually assembled catalogues were processed, including catalogues by Barlow, Rodionova, Boyce, Kuzmin, and our previous work. Each crater from the GT catalogue contains references to crater(s) that are used for its registration. This provides direct access to all properties assigned to craters from the used catalogues, which can be of interest even to those scientists that are not directly interested in CDAs. Having all these craters in a single catalogue also provides a good starting point for searching for craters still not catalogued manually, which is also expected to be one of the challenges of CDAs. The resulting new GT catalogue contains 57,633 craters, significantly more than any previous catalogue. From this point of view, GT-57633 catalogue is currently the most complete catalogue of large Martian impact craters. Additionally, each crater from the resulting GT-57633 catalogue is aligned with MOLA topography and, during the final review phase, additionally registered/aligned with 1/256° THEMIS-DIR, 1/256° MDIM and 1/256° MOC data-sets. Accordingly, the resulting GT-57633 catalogue can successfully be used as a part of the framework for evaluation of CDAs.

VizieR Online Data Catalog: KiDS-ESO-DR3 multi-band source catalog (de Jong+, 2017)

NASA Astrophysics Data System (ADS)

de Jong, J. T. A.; Verdoes Kleijn, G. A.; Erben, T.; Hildebrandt, H.; Kuijken, K.; Sikkema, G.; Brescia, M.; Bilicki, M.; Napolitano, N. R.; Amaro, V.; Begeman, K. G.; Boxhoorn, D. R.; Buddelmeijer, H.; Cavuoti, S.; Getman, F.; Grado, A.; Helmich, E.; Huang, Z.; Irisarri, N.; La Barbera, F.; Longo, G.; McFarland, J. P.; Nakajima, R.; Paolillo, M.; Puddu, E.; Radovich, M.; Rifatto, A.; Tortora, C; Valentijn, E. A.; Vellucci, C.; Vriend, W-J.; Amon, A.; Blake, C.; Choi, A.; Fenech, Conti I.; Herbonnet, R.; Heymans, C.; Hoekstra, H.; Klaes, D.; Merten, J.; Miller, L.; Schneider, P.; Viola, M.

2017-04-01

KiDS-ESO-DR3 contains a multi-band source catalogue encompassing all publicly released tiles, a total of 440 survey tiles including the coadded images, weight maps, masks and source lists of 292 survey tiles of KiDS-ESO-DR3, adding to the 148 tiles released previously (50 in KiDS-ESO-DR1 and 98 in KiDS-ESO-DR2). (1 data file).

Quasar spectral variability from the XMM-Newton serendipitous source catalogue

NASA Astrophysics Data System (ADS)

Serafinelli, R.; Vagnetti, F.; Middei, R.

2017-04-01

Context. X-ray spectral variability analyses of active galactic nuclei (AGN) with moderate luminosities and redshifts typically show a "softer when brighter" behaviour. Such a trend has rarely been investigated for high-luminosity AGNs (Lbol ≳ 1044 erg/s), nor for a wider redshift range (e.g. 0 ≲ z ≲ 5). Aims: We present an analysis of spectral variability based on a large sample of 2700 quasars, measured at several different epochs, extracted from the fifth release of the XMM-Newton Serendipitous Source Catalogue. Methods: We quantified the spectral variability through the parameter β defined as the ratio between the change in the photon index Γ and the corresponding logarithmic flux variation, β = -ΔΓ/Δlog FX. Results: Our analysis confirms a softer when brighter behaviour for our sample, extending the previously found general trend to high luminosity and redshift. We estimate an ensemble value of the spectral variability parameter β = -0.69 ± 0.03. We do not find dependence of β on redshift, X-ray luminosity, black hole mass or Eddington ratio. A subsample of radio-loud sources shows a smaller spectral variability parameter. There is also some change with the X-ray flux, with smaller β (in absolute value) for brighter sources. We also find significant correlations for a small number of individual sources, indicating more negative values for some sources.

Study of the star catalogue (epoch AD 1396.0) recorded in ancient Korean astronomical almanac

NASA Astrophysics Data System (ADS)

Jeon, Junhyeok; Lee, Yong Bok; Lee, Yong-Sam

2015-11-01

The study of old star catalogues provides important astrometric data. Most of the researches based on the old star catalogues were manuscript published in Europe and from Arabic/Islam. However, the old star catalogues published in East Asia did not get attention. Therefore, among the East Asian star catalogues we focus on a particular catalogue recorded in a Korean almanac. Its catalogue contains 277 stars that are positioned in a region within 10° of the ecliptic plane. The stars in the catalogue were identified using the modern Hipparcos catalogue. We identified 274 among 277 stars, which is a rate of 98.9 per cent. The catalogue records the epoch of the stars' positions as AD 1396.0. However, by using all of the identified stars we found that the initial epoch of the catalogue is AD 1363.1 ± 3.2. In conclusion, the star catalogue was compiled and edited from various older star catalogues. We assume a correlation with the Almagest by Ptolemaios. This study presents newly analysed results from the historically important astronomical data discovered in East Asia. Therefore, this star catalogue will become important data for comparison with the star catalogues published in Europe and from Arabic/Islam.

A search for long-time-scale, low-frequency radio transients

NASA Astrophysics Data System (ADS)

Murphy, Tara; Kaplan, David L.; Croft, Steve; Lynch, Christene; Callingham, J. R.; Bannister, Keith; Bell, Martin E.; Hurley-Walker, Natasha; Hancock, Paul; Line, Jack; Rowlinson, Antonia; Lenc, Emil; Intema, H. T.; Jagannathan, P.; Ekers, Ronald D.; Tingay, Steven; Yuan, Fang; Wolf, Christian; Onken, Christopher A.; Dwarakanath, K. S.; For, B.-Q.; Gaensler, B. M.; Hindson, L.; Johnston-Hollitt, M.; Kapińska, A. D.; McKinley, B.; Morgan, J.; Offringa, A. R.; Procopio, P.; Staveley-Smith, L.; Wayth, R.; Wu, C.; Zheng, Q.

2017-04-01

We present a search for transient and highly variable sources at low radio frequencies (150-200 MHz) that explores long time-scales of 1-3 yr. We conducted this search by comparing the TIFR GMRT Sky Survey Alternative Data Release 1 (TGSS ADR1) and the GaLactic and Extragalactic All-sky Murchison Widefield Array (GLEAM) survey catalogues. To account for the different completeness thresholds in the individual surveys, we searched for compact GLEAM sources above a flux density limit of 100 mJy that were not present in the TGSS ADR1; and also for compact TGSS ADR1 sources above a flux density limit of 200 mJy that had no counterpart in GLEAM. From a total sample of 234 333 GLEAM sources and 275 612 TGSS ADR1 sources in the overlap region between the two surveys, there were 99 658 GLEAM sources and 38 978 TGSS ADR sources that passed our flux density cut-off and compactness criteria. Analysis of these sources resulted in three candidate transient sources. Further analysis ruled out two candidates as imaging artefacts. We analyse the third candidate and show it is likely to be real, with a flux density of 182 ± 26 mJy at 147.5 MHz. This gives a transient surface density of ρ = (6.2 ± 6) × 10-5 deg-2. We present initial follow-up observations and discuss possible causes for this candidate. The small number of spurious sources from this search demonstrates the high reliability of these two new low-frequency radio catalogues.

Macroeconomic Activity Module - NEMS Documentation

EIA Publications

2016-01-01

Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Macroeconomic Activity Module (MAM) used to develop the Annual Energy Outlook for 2016 (AEO2016). The report catalogues and describes the module assumptions, computations, methodology, parameter estimation techniques, and mainframe source code

The Large Area Radio Galaxy Evolution Spectroscopic Survey (LARGESS): survey design, data catalogue and GAMA/WiggleZ spectroscopy

NASA Astrophysics Data System (ADS)

Ching, John H. Y.; Sadler, Elaine M.; Croom, Scott M.; Johnston, Helen M.; Pracy, Michael B.; Couch, Warrick J.; Hopkins, A. M.; Jurek, Russell J.; Pimbblet, K. A.

2017-01-01

We present the Large Area Radio Galaxy Evolution Spectroscopic Survey (LARGESS), a spectroscopic catalogue of radio sources designed to include the full range of radio AGN populations out to redshift z ˜ 0.8. The catalogue covers ˜800 deg2 of sky, and provides optical identifications for 19 179 radio sources from the 1.4 GHz Faint Images of the Radio Sky at Twenty-cm (FIRST) survey down to an optical magnitude limit of Imod < 20.5 in Sloan Digital Sky Survey (SDSS) images. Both galaxies and point-like objects are included, and no colour cuts are applied. In collaboration with the WiggleZ and Galaxy And Mass Assembly (GAMA) spectroscopic survey teams, we have obtained new spectra for over 5000 objects in the LARGESS sample. Combining these new spectra with data from earlier surveys provides spectroscopic data for 12 329 radio sources in the survey area, of which 10 856 have reliable redshifts. 85 per cent of the LARGESS spectroscopic sample are radio AGN (median redshift z = 0.44), and 15 per cent are nearby star-forming galaxies (median z = 0.08). Low-excitation radio galaxies (LERGs) comprise the majority (83 per cent) of LARGESS radio AGN at z < 0.8, with 12 per cent being high-excitation radio galaxies (HERGs) and 5 per cent radio-loud QSOs. Unlike the more homogeneous LERG and QSO sub-populations, HERGs are a heterogeneous class of objects with relatively blue optical colours and a wide dispersion in mid-infrared colours. This is consistent with a picture in which most HERGs are hosted by galaxies with recent or ongoing star formation as well as a classical accretion disc.

Revision of FMM-Yukawa: An adaptive fast multipole method for screened Coulomb interactions

NASA Astrophysics Data System (ADS)

Zhang, Bo; Huang, Jingfang; Pitsianis, Nikos P.; Sun, Xiaobai

2010-12-01

FMM-YUKAWA is a mathematical software package primarily for rapid evaluation of the screened Coulomb interactions of N particles in three dimensional space. Since its release, we have revised and re-organized the data structure, software architecture, and user interface, for the purpose of enabling more flexible, broader and easier use of the package. The package and its documentation are available at http://www.fastmultipole.org/, along with a few other closely related mathematical software packages. New version program summaryProgram title: FMM-Yukawa Catalogue identifier: AEEQ_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEQ_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU GPL 2.0 No. of lines in distributed program, including test data, etc.: 78 704 No. of bytes in distributed program, including test data, etc.: 854 265 Distribution format: tar.gz Programming language: FORTRAN 77, FORTRAN 90, and C. Requires gcc and gfortran version 4.4.3 or later Computer: All Operating system: Any Classification: 4.8, 4.12 Catalogue identifier of previous version: AEEQ_v1_0 Journal reference of previous version: Comput. Phys. Comm. 180 (2009) 2331 Does the new version supersede the previous version?: Yes Nature of problem: To evaluate the screened Coulomb potential and force field of N charged particles, and to evaluate a convolution type integral where the Green's function is the fundamental solution of the modified Helmholtz equation. Solution method: The new version of fast multipole method (FMM) that diagonalizes the multipole-to-local translation operator is applied with the tree structure adaptive to sample particle locations. Reasons for new version: To handle much larger particle ensembles, to enable the iterative use of the subroutines in a solver, and to remove potential contention in assignments for parallelization. Summary of revisions: The software package FMM-Yukawa has been revised and re-organized in data structure, software architecture, programming methods, and user interface. The revision enables more flexible use of the package and economic use of memory resources. It consists of five stages. The initial stage (stage 1) determines, based on the accuracy requirement and FMM theory, the length of multipole expansions and the number of quadrature points for diagonalization, and loads the quadrature nodes and weights that are computed off line. Stage 2 constructs the oct-tree and interaction lists, with adaptation to the sparsity or density of particles and employing a dynamic memory allocation scheme at every tree level. Stage 3 executes the core FMM subroutine for numerical calculation of the particle interactions. The subroutine can now be used iteratively as in a solver, while the particle locations remain the same. Stage 4 releases the memory allocated in Stage 2 for the adaptive tree and interaction lists. The user can modify the iterative routine easily. When the particle locations are changed such as in a molecular dynamics simulation, stage 2 to 4 can also be used together repeatedly. The final stage releases the memory space used for the quadrature and other remaining FMM parameters. Programs at the stage level and at the user interface are re-written in the C programming language, while most of the translation and interaction operations remain in FORTRAN. As a result of the change in data structures and memory allocation, the revised package can accommodate much larger particle ensembles while maintaining the same accuracy-efficiency performance. The new version is also developed as an important precursor to its parallel counterpart on multi-core or many core processors in a shared memory programming environment. Particularly, in order to ensure mutual exclusion in concurrent updates without incurring extra latency, we have replaced all the assignment statements at a source box that put its data to multiple target boxes with assignments at every target box that gather data from source boxes. This amounts to replacing the column version of matrix-vector multiplication with the row version. The matrix here, however, is in compressive representation. Sufficient care is taken in the revision not to alter the algorithmic complexity or numerical behavior, as concurrent writing potentially takes place in the upward calculation of the multipole expansion coefficients, interactions at every level of the FMM tree, and downward calculation of the local expansion coefficients. The software modules and their compositions are also organized according to the stages they are used. Demonstration files and makefiles for merging the user routines and the library routines are provided. Restrictions: Accuracy requirement is described in terms of three or six digits. Higher multiples of three digits will be allowed in a later version. Finer decimation in digits for accuracy specification may or may not be necessary. Unusual features: Ready and friendly for customized use and instrumental in expression of concurrency and dependency for efficient parallelization. Running time: The running time depends linearly on the number N of particles, and varies with the distribution characteristics of the particle distribution. It also depends on the accuracy requirement, a higher accuracy requirement takes relatively longer time. The code outperforms the direct summation method when N⩾750.

Amplitude and Recurrence Time of LP activity at Mt. Etna, Italy

NASA Astrophysics Data System (ADS)

Cauchie, Léna; Saccorotti, Gilberto; Bean, Christopher

2013-04-01

The manifestation of Long-Period (LP) activity is attested on many volcanoes worldwide and is thought to be associated with the resonant oscillations of subsurface, fluid-filled, cracks and conduits. Nonetheless the actual source mechanism that originates the resonance is still unclear. Different models have been proposed so far, including (i) fluid flow instabilities as periodic degassing and (ii) brittle failure in viscous magmas. Since LP activity usually precedes and accompanies volcanic eruption, the understanding of these sources is crucial for the hazard assessment and eruption early warning. The work is aimed at improving the understanding of the LP source mechanism through a statistical analysis of detailed LP catalogues. The behaviour of LP activity is compared with the empirical laws governing earthquakes recurrence (e.g., Gutenberg-Richter [GR] and Gamma-law distributions), in order to understand what relationships, if any, exist between these two apparently different earthquake classes. In particular, about 13000 events were detected on Mount Etna in August 2005 through a STA/LTA method. For this given period, the volcano does not present particular sign of unrest. The manifestation of the LP events is sustained in time over all the period of analysis. From the analysis of the directional properties, it turns out that the events of this first catalog propagate from 2 distinct sources . Furthermore, the events exhibit a high degree of waveform similarity, and provide a criterion for classification/source separation. The events were then grouped into families of comparable waveforms, resulting also in a separation for their source locations. We then used template signals of each family for a Matched-Filtering of the continuous data streams, in order to discriminate small-amplitude events previously undetected by the STA/LTA triggering method. This procedure allowed for a significant enrichment of the catalogues. The retrieved amplitude distributions, similar for both families, differ instead significantly from the Gutenberg-Richter law, and the inter-event times distributions don't follow a typical Gamma-law. In order to compare these results with a catalogue for which the source mechanism is well-established, we applied the same analysis procedure to a dataset from Stromboli Volcano, where LP activity is closely related to VLP (Very-Long-Period) pulses, in turn associated with the summit explosions. Again, catalogues of thousands of LP events were achieved over one month of seismic records (July 2011). Our results indicate a similar behaviour in terms of both amplitude and inter-event time distributions, with respect to what observed at Mt. Etna. This suggests that the Etna's LP data are likely related with a degassing process occurring at depth. Nonetheless, further studies are needed in order to quantify the time recurrence and amplitude distribution of brittle failure in viscous, stressed magmas. Hopefully, these steps will lead to an improved understanding of LP activity in different volcanic contexts, in turn clarifying its significance in terms of eruption forecasting.

ISICS2008: An expanded version of ISICS for calculating K-, L-, and M-shell cross sections from PWBA and ECPSSR theory

NASA Astrophysics Data System (ADS)

Cipolla, Sam J.

2009-09-01

New version program summaryProgram title: ISICS2008 Catalogue identifier: ADDS_v4_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADDS_v4_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 5420 No. of bytes in distributed program, including test data, etc.: 107 669 Distribution format: tar.gz Programming language: C Computer: 80 486 or higher level PCs Operating system: Windows XP and all earlier operating systems Classification: 16.7 Catalogue identifier of previous version: ADDS_v3_0 Journal reference of previous version: Comput. Phys. Comm. 179 (2008) 616 Does the new version supersede the previous version?: Yes Nature of problem: Ionization and X-ray production cross section calculations for ion-atom collisions. Solution method: Numerical integration of form factor using a logarithmic transform and Gaussian quadrature, plus exact integration limits. Reasons for new version: Addition of relativistic treatment of both projectile and K-shell electrons. Summary of revisions: A new addition to ISICS is the option (R) to calculate ECPSSR cross sections that account for the relativistic treatment of both projectile and K-shell electron, as proposed recently by Lapicki [1], accordingly as σKRECPSSR=Cṡ(1+0.07(()ṡσ(√{(mKRυ1R)}/Z,ςθ), where υ1R is the relativistic projectile velocity. The option can also be invoked in calculating ECPSShsR, where hsR stands for the Hartree-Slater description of the K-shell electron, which was already incorporated into ISICS2006 [2,3], and is now expressed in this option as, σKRECPSShsR=CṡhsR((2υ1R)/(Zςθ),Z/137)ṡ(1+0.07(()ṡσ(υ1R/Z,ςθ) using the function hsR that is already incorporated into ISICS2006. It should be noted that these expressions are corrected versions [4] from the ones published in Ref. [1]. In this new version, ISICS2008, the option line in the main menu that read "Use Relativistic Proj. velocity" has been replaced by "R option for K-shell … Uses Rel. Proj. vel.". As before, various combinations of options can be utilized and each is denoted in the output. Restrictions: The consumed CPU time increases with the atomic shell (K,L,M), but execution is still very fast. Additional comments: A revised User Manual is included in the distribution file. Running time: This depends on which shell and the number of different energies to be used in the calculation. The running time is not significantly changed from the previous version. As before, to calculate K-shell cross sections for protons striking carbon for 19 different proton energies it took less than 10 s; to calculate M-shell cross sections for protons on gold for 21 proton energies it took 4.2 min. References:G. Lapicki, J. Phys. B: At. Mol. Op. Phys. 41 (2008) 115201. S. Cipolla, Comput. Phys. Comm. 176 (2007) 157. S. Cipolla, Nucl. Instrum. Methods Phys. Res. B 261 (2007) 142. G. Lapicki, private communication.

Modular reweighting software for statistical mechanical analysis of biased equilibrium data

NASA Astrophysics Data System (ADS)

Sindhikara, Daniel J.

2012-07-01

Here a simple, useful, modular approach and software suite designed for statistical reweighting and analysis of equilibrium ensembles is presented. Statistical reweighting is useful and sometimes necessary for analysis of equilibrium enhanced sampling methods, such as umbrella sampling or replica exchange, and also in experimental cases where biasing factors are explicitly known. Essentially, statistical reweighting allows extrapolation of data from one or more equilibrium ensembles to another. Here, the fundamental separable steps of statistical reweighting are broken up into modules - allowing for application to the general case and avoiding the black-box nature of some “all-inclusive” reweighting programs. Additionally, the programs included are, by-design, written with little dependencies. The compilers required are either pre-installed on most systems, or freely available for download with minimal trouble. Examples of the use of this suite applied to umbrella sampling and replica exchange molecular dynamics simulations will be shown along with advice on how to apply it in the general case. New version program summaryProgram title: Modular reweighting version 2 Catalogue identifier: AEJH_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJH_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 179 118 No. of bytes in distributed program, including test data, etc.: 8 518 178 Distribution format: tar.gz Programming language: C++, Python 2.6+, Perl 5+ Computer: Any Operating system: Any RAM: 50-500 MB Supplementary material: An updated version of the original manuscript (Comput. Phys. Commun. 182 (2011) 2227) is available Classification: 4.13 Catalogue identifier of previous version: AEJH_v1_0 Journal reference of previous version: Comput. Phys. Commun. 182 (2011) 2227 Does the new version supersede the previous version?: Yes Nature of problem: While equilibrium reweighting is ubiquitous, there are no public programs available to perform the reweighting in the general case. Further, specific programs often suffer from many library dependencies and numerical instability. Solution method: This package is written in a modular format that allows for easy applicability of reweighting in the general case. Modules are small, numerically stable, and require minimal libraries. Reasons for new version: Some minor bugs, some upgrades needed, error analysis added. analyzeweight.py/analyzeweight.py2 has been replaced by “multihist.py”. This new program performs all the functions of its predecessor while being versatile enough to handle other types of histograms and probability analysis. “bootstrap.py” was added. This script performs basic bootstrap resampling allowing for error analysis of data. “avg_dev_distribution.py” was added. This program computes the averages and standard deviations of multiple distributions, making error analysis (e.g. from bootstrap resampling) easier to visualize. WRE.cpp was slightly modified purely for cosmetic reasons. The manual was updated for clarity and to reflect version updates. Examples were removed from the manual in favor of online tutorials (packaged examples remain). Examples were updated to reflect the new format. An additional example is included to demonstrate error analysis. Running time: Preprocessing scripts 1-5 minutes, WHAM engine <1 minute, postprocess script ∼1-5 minutes.

GENXICC2.0: An upgraded version of the generator for hadronic production of double heavy baryons Ξ, Ξ and Ξ

NASA Astrophysics Data System (ADS)

Chang, Chao-Hsi; Wang, Jian-Xiong; Wu, Xing-Gang

2010-06-01

An upgraded (second) version of the package GENXICC (A Generator for Hadronic Production of the Double Heavy Baryons Ξ, Ξ and Ξ by C.H. Chang, J.X. Wang and X.G. Wu [its first version in: Comput. Phys. Comm. 177 (2007) 467]) is presented. Users, with this version being implemented in PYTHIA and a GNU C compiler, may simulate full events of these processes in various experimental environments conveniently. In comparison with the previous version, in order to implement it in PYTHIA properly, a subprogram for the fragmentation of the produced double heavy diquark to the relevant baryon is supplied and the interface of the generator to PYTHIA is changed accordingly. In the subprogram, with explanation, certain necessary assumptions (approximations) are made in order to conserve the momenta and the QCD 'color' flow for the fragmentation. Program summaryProgram title: GENXICC2.0 Catalogue identifier: ADZJ_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADZJ_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 102 482 No. of bytes in distributed program, including test data, etc.: 1 469 519 Distribution format: tar.gz Programming language: Fortran 77/90 Computer: Any LINUX based on PC with FORTRAN 77 or FORTRAN 90 and GNU C compiler as well Operating system: Linux RAM: About 2.0 MByte Classification: 11.2 Catalogue identifier of previous version: ADZJ_v1_0 Journal reference of previous version: Comput. Phys. Comm. 177 (2007) 467 Does the new version supersede the previous version?: No Nature of problem: Hadronic production of double heavy baryons Ξ, Ξ and Ξ Solution method: The code is based on NRQCD framework. With proper options, it can generate weighted and un-weighted events of hadronic double heavy baryon production. When the hadronizations of the produced jets and double heavy diquark are taken into account in the production, the upgraded version with proper interface to PYTHIA can generate full events. Reasons for new version: Responding to the feedback from users, we improve the generator mainly by carefully completing the 'final non-perturbative process', i.e. the formulation of the double heavy baryon from relevant intermediate diquark. In the present version, the information for fragmentation about momentum-flow and the color-flow, that is necessary for PYTHIA to generate full events, is retained although reasonable approximations are made. In comparison with the original version, the upgraded one can implement it in PYTHIA properly to do the full event simulation of the double heavy baryon production. Summary of revisions:We try to explain the treatment of the momentum distribution of the process more clearly than the original version, and show how the final baryon is generated through the typical intermediate diquark precisely. We present color flow of the involved processes precisely and the corresponding changes for the program are made. The corresponding changes of the program are explained in the paper. Restrictions: The color flow, particularly, in the piece of code programming of the fragmentation from the produced colorful double heavy diquark into a relevant double heavy baryon, is treated carefully so as to implement it in PYTHIA properly. Running time: It depends on which option is chosen to configure PYTHIA when generating full events and also on which mechanism is chosen to generate the events. Typically, for the most complicated case with gluon-gluon fusion mechanism to generate the mixed events via the intermediate diquark in (cc)[ and (cc)[ states, under the option, IDWTUP=1, to generate 1000 events, takes about 20 hours on a 1.8 GHz Intel P4-processor machine, whereas under the option, IDWTUP=3, even to generate 106 events takes about 40 minutes on the same machine.

VizieR Online Data Catalog: PMA Catalogue (Akhmetov+, 2017)

NASA Astrophysics Data System (ADS)

Akhmetov, V. S.; Fedorov, P. N.; Velichko, A. B.; Shulga, V. M.

2017-06-01

The idea for creating the catalogue is very simple. The PMA catalogue has been derived from a combination of two catalogues, namely 2MASS and Gaia DR1. The difference of epochs of observations for these catalogues is approximately 15 yr. The positions of objects in the Gaia DR1 catalogue are referred to the reference frame, which is consistent with ICRF to better than 0.1 mas for the J2015.0 epoch. The positions of objects in 2MASS are referred to HCRF, which, as was shown in Kovalevsky et al. (1997A&A...323..620K), is aligned with the ICRF to within ±0.6 mas at the epoch 1991.25 and is non-rotating with respect to distant extragalactic objects to within ±0.25mas/yr. By comparing the positions of the common objects contained in the catalogues, it is possible to determine their proper motions within their common range of stellar magnitudes by dividing differences of positions over the time interval between their observations. Formally, proper motions derived in such a way are given in the ICRF system, because the positions of both Gaia DR1 stars and those of 2MASS objects (through Hipparcos/Tycho-2 stars) are given in the ICRF and cover the whole sphere without gaps. We designate them further in this paper as relative, with the aim of discriminating them from absolute ones, which refer to the reference frame defined by the positions of about 1.6 million galaxies from Gaia DR1. There is no possibility of obtaining estimates of individual errors of proper motions of stars for the PMA Catalogue from the intrinsic convergence, because the direct errors for positions are not indicated in 2MASS. Therefore we use some indirect methods to obtain the estimates of uncertainties for proper motions. After elimination of the systematic errors, the root-mean-squared deviation of the coordinate differences of extended sources is about 200mas, and the mean number of galaxies inside each pixel is about 1300, so we expect the error of the absolute calibration to be 0.35mas/yr. We compared the proper motions of common objects from PMA and from the TGAS and UCAC4 catalogues. Knowing the mean-square errors of (PMA-TGAS) and (PMA-UCAC4) proper motion differences in each pixel, the appropriate errors in PMA vary from 2 to 10mas/yr, depending on magnitude, which are consistent with the errors calculated above. In case of any problems or questions, please contact by e-mail V.S. Akhmetov (akhmetovvs(at)gmail.com or akhmetov(at)astron.kharkov.ua). (1 data file).

Galactic rings revisited - I. CVRHS classifications of 3962 ringed galaxies from the Galaxy Zoo 2 Database

NASA Astrophysics Data System (ADS)

Buta, Ronald J.

2017-11-01

Rings are important and characteristic features of disc-shaped galaxies. This paper is the first in a series that re-visits galactic rings with the goals of further understanding the nature of the features and for examining their role in the secular evolution of galaxy structure. The series begins with a new sample of 3962 galaxies drawn from the Galaxy Zoo 2 citizen science data base, selected because zoo volunteers recognized a ring-shaped pattern in the morphology as seen in Sloan Digital Sky Survey colour images. The galaxies are classified within the framework of the Comprehensive de Vaucouleurs revised Hubble-Sandage system. It is found that zoo volunteers cued on the same kinds of ring-like features that were recognized in the 1995 Catalogue of Southern Ringed Galaxies. This paper presents the full catalogue of morphological classifications, comparisons with other sources of classifications and some histograms designed mainly to highlight the content of the catalogue. The advantages of the sample are its large size and the generally good quality of the images; the main disadvantage is the low physical resolution that limits the detectability of linearly small rings such as nuclear rings. The catalogue includes mainly inner and outer disc rings and lenses. Cataclysmic (`encounter-driven') rings (such as ring and polar ring galaxies) are recognized in less than 1 per cent of the sample.

GLADE: A Galaxy Catalogue for Multi-Messenger Searches in the Advanced Gravitational-Wave Detector Era

NASA Astrophysics Data System (ADS)

Dálya, G.; Galgóczi, G.; Dobos, L.; Frei, Z.; Heng, I. S.; Macas, R.; Messenger, C.; Raffai, P.; de Souza, R. S.

2018-06-01

We introduce a value-added full-sky catalogue of galaxies, named as Galaxy List for the Advanced Detector Era, or GLADE. The purpose of this catalogue is to (i) help identifications of host candidates for gravitational-wave events, (ii) support target selections for electromagnetic follow-up observations of gravitational-wave candidates, (iii) provide input data on the matter distribution of the local universe for astrophysical or cosmological simulations, and (iv) help identifications of host candidates for poorly localised electromagnetic transients, such as gamma-ray bursts observed with the InterPlanetary Network. Both being potential hosts of astrophysical sources of gravitational waves, GLADE includes inactive and active galaxies as well. GLADE was constructed by cross-matching and combining data from five separate (but not independent) astronomical catalogues: GWGC, 2MPZ, 2MASS XSC, HyperLEDA and SDSS-DR12Q. GLADE is complete up to d_L=37^{+3}_{-4} Mpc in terms of the cumulative B-band luminosity of galaxies within luminosity distance dL, and contains all of the brightest galaxies giving half of the total B-band luminosity up to dL = 91 Mpc. As B-band luminosity is expected to be a tracer of binary neutron star mergers (currently the prime targets of joint GW+EM detections), our completeness measures can be used as estimations of completeness for containing all binary neutron star merger hosts in the local universe.

SPIDERS: selection of spectroscopic targets using AGN candidates detected in all-sky X-ray surveys

NASA Astrophysics Data System (ADS)

Dwelly, T.; Salvato, M.; Merloni, A.; Brusa, M.; Buchner, J.; Anderson, S. F.; Boller, Th.; Brandt, W. N.; Budavári, T.; Clerc, N.; Coffey, D.; Del Moro, A.; Georgakakis, A.; Green, P. J.; Jin, C.; Menzel, M.-L.; Myers, A. D.; Nandra, K.; Nichol, R. C.; Ridl, J.; Schwope, A. D.; Simm, T.

2017-07-01

SPIDERS (SPectroscopic IDentification of eROSITA Sources) is a Sloan Digital Sky Survey IV (SDSS-IV) survey running in parallel to the Extended Baryon Oscillation Spectroscopic Survey (eBOSS) cosmology project. SPIDERS will obtain optical spectroscopy for large numbers of X-ray-selected active galactic nuclei (AGN) and galaxy cluster members detected in wide-area eROSITA, XMM-Newton and ROSAT surveys. We describe the methods used to choose spectroscopic targets for two sub-programmes of SPIDERS X-ray selected AGN candidates detected in the ROSAT All Sky and the XMM-Newton Slew surveys. We have exploited a Bayesian cross-matching algorithm, guided by priors based on mid-IR colour-magnitude information from the Wide-field Infrared Survey Explorer survey, to select the most probable optical counterpart to each X-ray detection. We empirically demonstrate the high fidelity of our counterpart selection method using a reference sample of bright well-localized X-ray sources collated from XMM-Newton, Chandra and Swift-XRT serendipitous catalogues, and also by examining blank-sky locations. We describe the down-selection steps which resulted in the final set of SPIDERS-AGN targets put forward for spectroscopy within the eBOSS/TDSS/SPIDERS survey, and present catalogues of these targets. We also present catalogues of ˜12 000 ROSAT and ˜1500 XMM-Newton Slew survey sources that have existing optical spectroscopy from SDSS-DR12, including the results of our visual inspections. On completion of the SPIDERS programme, we expect to have collected homogeneous spectroscopic redshift information over a footprint of ˜7500 deg2 for >85 per cent of the ROSAT and XMM-Newton Slew survey sources having optical counterparts in the magnitude range 17 < r < 22.5, producing a large and highly complete sample of bright X-ray-selected AGN suitable for statistical studies of AGN evolution and clustering.

Numerical evaluation of multi-loop integrals for arbitrary kinematics with SecDec 2.0

NASA Astrophysics Data System (ADS)

Borowka, Sophia; Carter, Jonathon; Heinrich, Gudrun

2013-02-01

We present the program SecDec 2.0, which contains various new features. First, it allows the numerical evaluation of multi-loop integrals with no restriction on the kinematics. Dimensionally regulated ultraviolet and infrared singularities are isolated via sector decomposition, while threshold singularities are handled by a deformation of the integration contour in the complex plane. As an application, we present numerical results for various massive two-loop four-point diagrams. SecDec 2.0 also contains new useful features for the calculation of more general parameter integrals, related for example to phase space integrals. Program summaryProgram title: SecDec 2.0 Catalogue identifier: AEIR_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEIR_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 156829 No. of bytes in distributed program, including test data, etc.: 2137907 Distribution format: tar.gz Programming language: Wolfram Mathematica, Perl, Fortran/C++. Computer: From a single PC to a cluster, depending on the problem. Operating system: Unix, Linux. RAM: Depending on the complexity of the problem Classification: 4.4, 5, 11.1. Catalogue identifier of previous version: AEIR_v1_0 Journal reference of previous version: Comput. Phys. Comm. 182(2011)1566 Does the new version supersede the previous version?: Yes Nature of problem: Extraction of ultraviolet and infrared singularities from parametric integrals appearing in higher order perturbative calculations in gauge theories. Numerical integration in the presence of integrable singularities (e.g., kinematic thresholds). Solution method: Algebraic extraction of singularities in dimensional regularization using iterated sector decomposition. This leads to a Laurent series in the dimensional regularization parameter ɛ, where the coefficients are finite integrals over the unit hypercube. Those integrals are evaluated numerically by Monte Carlo integration. The integrable singularities are handled by choosing a suitable integration contour in the complex plane, in an automated way. Reasons for new version: In the previous version the calculation of multi-scale integrals was restricted to the Euclidean region. Now multi-loop integrals with arbitrary physical kinematics can be evaluated. Another major improvement is the possibility of full parallelization. Summary of revisions: No restriction on the kinematics for multi-loop integrals. The integrand can be constructed from the topological cuts of the diagram. Possibility of full parallelization. Numerical integration of multi-loop integrals written in C++ rather than Fortran. Possibility to loop over ranges of parameters. Restrictions: Depending on the complexity of the problem, limited by memory and CPU time. The restriction that multi-scale integrals could only be evaluated at Euclidean points is superseded in version 2.0. Running time: Between a few minutes and several days, depending on the complexity of the problem. Test runs provided take only seconds.

The effect of unresolved contaminant stars on the cross-matching of photometric catalogues

NASA Astrophysics Data System (ADS)

Wilson, Tom J.; Naylor, Tim

2017-07-01

A fundamental process in astrophysics is the matching of two photometric catalogues. It is crucial that the correct objects be paired, and that their photometry does not suffer from any spurious additional flux. We compare the positions of sources in Wide-field Infrared Survey Explorer (WISE), INT Photometric H α Survey, Two Micron All Sky Survey and AAVSO Photometric All Sky Survey with Gaia Data Release 1 astrometric positions. We find that the separations are described by a combination of a Gaussian distribution, wider than naively assumed based on their quoted uncertainties, and a large wing, which some authors ascribe to proper motions. We show that this is caused by flux contamination from blended stars not treated separately. We provide linear fits between the quoted Gaussian uncertainty and the core fit to the separation distributions. We show that at least one in three of the stars in the faint half of a given catalogue will suffer from flux contamination above the 1 per cent level when the density of catalogue objects per point spread function area is above approximately 0.005. This has important implications for the creation of composite catalogues. It is important for any closest neighbour matches as there will be a given fraction of matches that are flux contaminated, while some matches will be missed due to significant astrometric perturbation by faint contaminants. In the case of probability-based matching, this contamination affects the probability density function of matches as a function of distance. This effect results in up to 50 per cent fewer counterparts being returned as matches, assuming Gaussian astrometric uncertainties for WISE-Gaia matching in crowded Galactic plane regions, compared with a closest neighbour match.

Moment tensor clustering: a tool to monitor mining induced seismicity

NASA Astrophysics Data System (ADS)

Cesca, Simone; Dahm, Torsten; Tolga Sen, Ali

2013-04-01

Automated moment tensor inversion routines have been setup in the last decades for the analysis of global and regional seismicity. Recent developments could be used to analyse smaller events and larger datasets. In particular, applications to microseismicity, e.g. in mining environments, have then led to the generation of large moment tensor catalogues. Moment tensor catalogues provide a valuable information about the earthquake source and details of rupturing processes taking place in the seismogenic region. Earthquake focal mechanisms can be used to discuss the local stress field, possible orientations of the fault system or to evaluate the presence of shear and/or tensile cracks. Focal mechanism and moment tensor solutions are typically analysed for selected events, and quick and robust tools for the automated analysis of larger catalogues are needed. We propose here a method to perform cluster analysis for large moment tensor catalogues and identify families of events which characterize the studied microseismicity. Clusters include events with similar focal mechanisms, first requiring the definition of distance between focal mechanisms. Different metrics are here proposed, both for the case of pure double couple, constrained moment tensor and full moment tensor catalogues. Different clustering approaches are implemented and discussed. The method is here applied to synthetic and real datasets from mining environments to demonstrate its potential: the proposed cluserting techniques prove to be able to automatically recognise major clusters. An important application for mining monitoring concerns the early identification of anomalous rupture processes, which is relevant for the hazard assessment. This study is funded by the project MINE, which is part of the R&D-Programme GEOTECHNOLOGIEN. The project MINE is funded by the German Ministry of Education and Research (BMBF), Grant of project BMBF03G0737.

Cataloguing and displaying Web feeds from French language health sites: a Web 2.0 add-on to a health gateway.

PubMed

Kerdelhué, G; Thirion, B; Dahamna, B; Darmoni, S J

2008-01-01

Among the numerous new functionalities of the Internet, commonly called Web 2.0, Web syndication illustrates the trend for better and faster information sharing. Web feeds (a.k.a RSS feeds), which were used mostly on weblogs at first, are now also widely used in academic, scientific and institutional websites such as PubMed. As very few French language feeds were listed or catalogued in the Health field by the year of 2007, it was decided to implement them in the quality-controlled health gateway CISMeF ([French] acronym for Catalogue and Index of French Language Health Resources on the Internet). Furthermore, making full use of the nature of Web syndication, a Web feed aggregator was put online in to provide a dynamic news gateway called "CISMeF actualités" (http://www.chu-rouen.fr/actualites/). This article describes the process to retrieve and implement the Web feeds in the catalogue and how its terminology was adjusted to describe this new content. It also describes how the aggregator was put online and the features of this news gateway. CISMeF actualités was built accordingly to the editorial policy of CISMeF. Only a part of the Web feeds of the catalogue were included to display the most authoritative sources. Web feeds were also grouped by medical specialties and by countries using the prior indexing of websites with MeSH terms and the so-called metaterms. CISMeF actualités now displays 131 Web feeds across 40 different medical specialities, coming from 5 different countries. It is one example, among many, that static hypertext links can now easily and beneficially be completed, or replaced, by dynamic display of Web content using syndication feeds.

Commercial Demand Module - NEMS Documentation

EIA Publications

2017-01-01

Documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Commercial Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components.

All-sky brightness monitoring of light pollution with astronomical methods.

PubMed

Rabaza, O; Galadí-Enríquez, D; Estrella, A Espín; Dols, F Aznar

2010-06-01

This paper describes a mobile prototype and a protocol to measure light pollution based on astronomical methods. The prototype takes three all-sky images using BVR filters of the Johnson-Cousins astronomical photometric system. The stars are then identified in the images of the Hipparcos and General Catalogue of Photometric Data II astronomical catalogues, and are used as calibration sources. This method permits the measurement of night-sky brightness and facilitates an estimate of which fraction is due to the light up-scattered in the atmosphere by a wide variety of man-made sources. This is achieved by our software, which compares the sky background flux to that of many stars of known brightness. The reduced weight and dimensions of the prototype allow the user to make measurements from virtually any location. This prototype is capable of measuring the sky distribution of light pollution, and also provides an accurate estimate of the background flux at each photometric band. (c) 2010 Elsevier Ltd. All rights reserved.

Searching for faint AGN in the CDFS: an X-ray (Chandra) vs optical variability (HST) comparison.

NASA Astrophysics Data System (ADS)

Georgantopoulos, I.; Pouliasis, E.; Bonanos, A.; Sokolovsky, K.; Yang, M.; Hatzidimitriou, D.; Bellas, I.; Gavras, P.; Spetsieri, Z.

2017-10-01

X-ray surveys are believed to be the most efficient way to detect AGN. Recently though, optical variability studies are claimed to probe even fainter AGN. We are presenting results from an HST study aimed to identify Active Galactic Nuclei (AGN) through optical variability selection in the CDFS.. This work is part of the 'Hubble Catalogue of Variables'project of ESA that aims to identify variable sources in the Hubble Source Catalogue.' In particular, we used Hubble Space Telescope (HST) z-band images taken over 5 epochs and performed aperture photometry to derive the lightcurves of the sources. Two statistical methods (standard deviation & interquartile range) resulting in a final sample of 175 variable AGN candidates, having removed the artifacts by visual inspection and known stars and supernovae. The fact that the majority of the sources are extended and variable indicates AGN activity. We compare the efficiency of the method by comparing with the 7Ms Chandra detections. Our work shows that the optical variability probes AGN at comparable redshifts but at deeper optical magnitudes. Our candidate AGN (non detected in X-rays) have luminosities of L_x<6×10^{40} erg/sec at z˜0.7 suggesting that these are associated with low luminosity Seyferts and LINERS.

Comparing the TYCHO Catalogue with CCD Astrograph Observations

NASA Astrophysics Data System (ADS)

Zacharias, N.; Hoeg, E.; Urban, S. E.; Corbin, T. E.

1997-08-01

Selected fields around radio-optical reference frame sources have been observed with the U.S. Naval Observatory CCD astrograph (UCA). This telescope is equipped with a red-corrected 206mm 5-element lens and a 4k by 4k CCD camera which provides a 1 square degree field of view. Positions with internal precisions of 20 mas for stars in the 7 to 12 magnitude range have been obtained with 30 second exposures. A comparison is made with the Tycho Catalogue, which is accurate to about 5 to 50 mas at mean epoch of J1991.25, depending on the magnitude of the star. Preliminary proper motions are obtained using the Astrographic Catalogue (AC) to update the Tycho positions to the epoch of the UCA observations, which adds an error contribution of about 15 to 20 mas. Individual CCD frames have been reduced with an average of 30 Tycho reference stars per frame. A linear plate model gives an average adjustment standard error of 46 mas, consistent with the internal errors. The UCA is capable of significantly improving the positions of Tycho stars fainter than about visual magnitude 9.5.

Swift follow-up of gravitational wave triggers: results from the first aLIGO run and optimization for the future

NASA Astrophysics Data System (ADS)

Evans, P. A.; Kennea, J. A.; Palmer, D. M.; Bilicki, M.; Osborne, J. P.; O'Brien, P. T.; Tanvir, N. R.; Lien, A. Y.; Barthelmy, S. D.; Burrows, D. N.; Campana, S.; Cenko, S. B.; D'Elia, V.; Gehrels, N.; Marshall, F. E.; Page, K. L.; Perri, M.; Sbarufatti, B.; Siegel, M. H.; Tagliaferri, G.; Troja, E.

2016-10-01

During its first observing run, in late 2015, the advanced Laser Interferometer Gravitational-wave Observatory facility announced three gravitational wave (GW) triggers to electromagnetic follow-up partners. Two of these have since been confirmed as being of astrophysical origin: both are binary black hole mergers at ˜ 500 Mpc; the other trigger was later found not to be astrophysical. In this paper, we report on the Swift follow-up observations of the second and third triggers, including details of 21 X-ray sources detected; none of which can be associated with the GW event. We also consider the challenges that the next GW observing run will bring as the sensitivity and hence typical distance of GW events will increase. We discuss how to effectively use galaxy catalogues to prioritize areas for follow-up, especially in the presence of distance estimates from the GW data. We also consider two galaxy catalogues and suggest that the high completeness at larger distances of the 2MASS Photometric Redshift catalogue makes it very well suited to optimize Swift follow-up observations.

The X-CLASS-redMaPPer galaxy cluster comparison. I. Identification procedures

NASA Astrophysics Data System (ADS)

Sadibekova, T.; Pierre, M.; Clerc, N.; Faccioli, L.; Gastaud, R.; Le Fevre, J.-P.; Rozo, E.; Rykoff, E.

2014-11-01

Context. This paper is the first in a series undertaking a comprehensive correlation analysis between optically selected and X-ray-selected cluster catalogues. The rationale of the project is to develop a holistic picture of galaxy clusters utilising optical and X-ray-cluster-selected catalogues with well-understood selection functions. Aims: Unlike most of the X-ray/optical cluster correlations to date, the present paper focuses on the non-matching objects in either waveband. We investigate how the differences observed between the optical and X-ray catalogues may stem from (1) a shortcoming of the detection algorithms; (2) dispersion in the X-ray/optical scaling relations; or (3) substantial intrinsic differences between the cluster populations probed in the X-ray and optical bands. The aim is to inventory and elucidate these effects in order to account for selection biases in the further determination of X-ray/optical cluster scaling relations. Methods: We correlated the X-CLASS serendipitous cluster catalogue extracted from the XMM archive with the redMaPPer optical cluster catalogue derived from the Sloan Digital Sky Survey (DR8). We performed a detailed and, in large part, interactive analysis of the matching output from the correlation. The overlap between the two catalogues has been accurately determined and possible cluster positional errors were manually recovered. The final samples comprise 270 and 355 redMaPPer and X-CLASS clusters, respectively. X-ray cluster matching rates were analysed as a function of optical richness. In the second step, the redMaPPer clusters were correlated with the entire X-ray catalogue, containing point and uncharacterised sources (down to a few 10-15 erg s-1 cm-2 in the [0.5-2] keV band). A stacking analysis was performed for the remaining undetected optical clusters. Results: We find that all rich (λ ≥ 80) clusters are detected in X-rays out to z = 0.6. Below this redshift, the richness threshold for X-ray detection steadily decreases with redshift. Likewise, all X-ray bright clusters are detected by redMaPPer. After correcting for obvious pipeline shortcomings (about 10% of the cases both in optical and X-ray), ~50% of the redMaPPer (down to a richness of 20) are found to coincide with an X-CLASS cluster; when considering X-ray sources of any type, this fraction increases to ~80%; for the remaining objects, the stacking analysis finds a weak signal within 0.5 Mpc around the cluster optical centres. The fraction of clusters totally dominated by AGN-type emission appears to be a few percent. Conversely, ~40% of the X-CLASS clusters are identified with a redMaPPer (down to a richness of 20) - part of the non-matches being due to the X-CLASS sample extending further out than redMaPPer (z< 1.5 vs. z< 0.6), but extending the correlation down to a richness of 5 raises the matching rate to ~65%. Conclusions: This state-of-the-art study involving two well-validated cluster catalogues has shown itself to be complex, and it points to a number of issues inherent to blind cross-matching, owing both to pipeline shortcomings and cluster peculiar properties. These can only been accounted for after a manual check. The combined X-ray and optical scaling relations will be presented in a subsequent article.

GR@PPA 2.8: Initial-state jet matching for weak-boson production processes at hadron collisions

NASA Astrophysics Data System (ADS)

Odaka, Shigeru; Kurihara, Yoshimasa

2012-04-01

The initial-state jet matching method introduced in our previous studies has been applied to the event generation of single W and Z production processes and diboson (WW, WZ and ZZ) production processes at hadron collisions in the framework of the GR@PPA event generator. The generated events reproduce the transverse momentum spectra of weak bosons continuously in the entire kinematical region. The matrix elements (ME) for hard interactions are still at the tree level. As in previous versions, the decays of weak bosons are included in the matrix elements. Therefore, spin correlations and phase-space effects in the decay of weak bosons are exact at the tree level. The program package includes custom-made parton shower programs as well as ME-based hard interaction generators in order to achieve self-consistent jet matching. The generated events can be passed to general-purpose event generators to make the simulation proceed down to the hadron level. Catalogue identifier: ADRH_v3_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADRH_v3_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 112 146 No. of bytes in distributed program, including test data, etc.: 596 667 Distribution format: tar.gz Programming language: Fortran; with some included libraries coded in C and C++ Computer: All Operating system: Any UNIX-like system RAM: 1.6 Mega bytes at minimum Classification: 11.2 Catalogue identifier of previous version: ADRH_v2_0 Journal reference of previous version: Comput. Phys. Comm. 175 (2006) 665 External routines: Bash and Perl for the setup, and CERNLIB, ROOT, LHAPDF, PYTHIA according to the user's choice. Does the new version supersede the previous version?: No, this version supports only a part of the processes included in the previous versions. Nature of problem: We need to combine those processes including 0 jet and 1 jet in the matrix elements using an appropriate matching method, in order to simulate weak-boson production processes in the entire kinematical region. Solution method: The leading logarithmic components to be included in parton distribution functions and parton showers are subtracted from 1-jet matrix elements. Custom-made parton shower programs are provided to ensure satisfactory performance of the matching method. Reasons for new version: An initial-state jet matching method has been implemented. Summary of revisions: Weak-boson production processes associated with 0 jet and 1 jet can be consistently merged using the matching method. Restrictions: The built-in parton showers are not compatible with the PYTHIA new PS and the HERWIG PS. Unusual features: A large number of particles may be produced by the parton showers and passed to general-purpose event generators. Running time: About 10 min for initialization plus 25 s for every 1k-event generation for W production in the LHC condition, on a 3.0-GHz Intel Xeon processor with the default setting.

The AKARI FU-HYU galaxy evolution program: first results from the GOODS-N field

NASA Astrophysics Data System (ADS)

Pearson, C. P.; Serjeant, S.; Negrello, M.; Takagi, T.; Jeong, W.-S.; Matsuhara, H.; Wada, T.; Oyabu, S.; Lee, H. M.; Im, M. S.

2010-05-01

The AKARI FU-HYU mission program carried out mid-infrared imaging of several well studied Spitzer fields preferentially selecting fields already rich in multi-wavelength data from radio to X-ray wavelengths filling in the wavelength desert between the Spitzer IRAC and MIPS bands. We present the initial results for the FU-HYU survey in the GOODS-N field. We utilize the supreme multiwavelength coverage in the GOODS-N field to produce a multiwavelength catalogue from infrared to ultraviolet wavelengths, containing more than 4393 sources, including photometric redshifts. Using the FU-HYU catalogue we present colour-colour diagrams that map the passage of PAH features through our observation bands. We find that the longer mid-infrared bands from AKARI (IRC-L18W 18 micron band) and Spitzer (MIPS24 24 micron band) provide an accurate measure of the total MIR emission of the sources and therefore their probable total mid-infrared luminosity. We also find that colours incorporating the AKARI IRC-S11 11 micron band produce a bimodal distribution where an excess at 11 microns preferentially selects moderate redshift star-forming galaxies. These powerful colour-colour diagnostics are further used as tools to extract anomalous colour populations, in particular a population of Silicate Break galaxies from the GOODS-N field showing that dusty starbursts can be selected of specific redshift ranges (z = 1.2-1.6) by mid-infrared drop-out techniques. The FU-HYU catalogue will be made publically available to the astronomical community.

Adding source positions to the IVS Combination

NASA Astrophysics Data System (ADS)

Bachmann, S.; Thaller, D.

2016-12-01

Simultaneous estimation of source positions, Earth orientation parameters (EOPs) and station positions in one common adjustment is crucial for a consistent generation of celestial and terrestrial reference frame (CRF and TRF, respectively). VLBI is the only technique to guarantee this consistency. Previous publications showed that the VLBI intra-technique combination could improve the quality of the EOPs and station coordinates compared to the individual contributions. By now, the combination of EOP and station coordinates is well established within the IVS and in combination with other space geodetic techniques (e.g. inter-technique combined TRF like the ITRF). Most of the contributing IVS Analysis Centers (AC) now provide source positions as a third parameter type (besides EOP and station coordinates), which have not been used for an operational combined solution yet. A strategy for the combination of source positions has been developed and integrated into the routine IVS combination. Investigations are carried out to compare the source positions derived from different IVS ACs with the combined estimates to verify whether the source positions are improved by the combination, as it has been proven for EOP and station coordinates. Furthermore, global solutions of source positions, i.e., so-called catalogues describing a CRF, are generated consistently with the TRF similar to the IVS operational combined quarterly solution. The combined solutions of the source positions time series and the consistently generated TRF and CRF are compared internally to the individual solutions of the ACs as well as to external CRF catalogues and TRFs. Additionally, comparisons of EOPs based on different CRF solutions are presented as an outlook for consistent EOP, CRF and TRF realizations.

Communication in Health Professions: A European consensus on inter- and multi-professional learning objectives in German.

PubMed

Bachmann, Cadja; Kiessling, Claudia; Härtl, Anja; Haak, Rainer

2016-01-01

Communication is object of increasing attention in the health professions. Teaching communication competencies should already begin in undergraduate education or pre-registration training. The aim of this project was to translate the Health Professions Core Communication Curriculum (HPCCC), an English catalogue of learning objectives, into German to make its content widely accessible in the German-speaking countries. This catalogue lists 61 educational objectives and was agreed on by 121 international communication experts. A European reference framework for inter- and multi-professional curriculum development for communication in the health professions in German-speaking countries should be provided. The German version of the HPCCC was drafted by six academics and went through multiple revisions until consensus was reached. The learning objectives were paired with appropriate teaching and assessment tools drawn from the database of the teaching Committee of the European Association for Communication Health Care (tEACH). The HPCCC learning objectives are now available in German and can be applied for curriculum planning and development in the different German-speaking health professions, the educational objectives can also be used for inter-professional purposes. Examples for teaching methods and assessment tools are given for using and implementing the objectives. The German version of the HPCCC with learning objectives for communication in health professions can contribute significantly to inter- and multi-professional curriculum development in the health care professions in the German-speaking countries. Examples for teaching methods and assessment tools from the materials compiled by tEACH supplement the curricular content and provide suggestions for practical implementation of the learning objectives in teaching and assessment. The relevance of the German HPCCC to the processes of curriculum development for the various health professions and inter-professional approaches should be the subject of further evaluation.

James Dunlop's historical catalogue of southern nebulae and clusters

NASA Astrophysics Data System (ADS)

Cozens, Glen; Walsh, Andrew; Orchiston, Wayne

2010-03-01

In 1826 James Dunlop compiled the second ever catalogue of southern star clusters, nebulae and galaxies from Parramatta (NSW, Australia) using a 23-cm reflecting telescope. Initially acclaimed, the catalogue and author were later criticised and condemned by others - including Sir John Herschel and both the catalogue and author are now largely unknown. The criticism of the catalogue centred on the large number of fictitious or ‘missing’ objects, yet detailed analysis reveals the remarkable completeness of the catalogue, despite its inherent errors. We believe that James Dunlop was an important early Australian astronomer, and his catalogue should be esteemed as the southern equivalent of Messier's famous northern catalogue.

Planck intermediate results. XXVI. Optical identification and redshifts of Planck clusters with the RTT150 telescope

DOE PAGES

Ade, P. A. R.; Aghanim, N.; Arnaud, M.; ...

2015-09-30

In this paper, we present the results of approximately three years of observations of Planck Sunyaev-Zeldovich (SZ) sources with the Russian-Turkish 1.5 m telescope (RTT150), as a part of the optical follow-up programme undertaken by the Planck collaboration. During this time period approximately 20% of all dark and grey clear time available at the telescope was devoted to observations of Planck objects. Some observations of distant clusters were also done at the 6 m Bolshoi Telescope Alt-azimutalnyi (BTA) of the Special Astrophysical Observatory of the Russian Academy of Sciences. In total, deep, direct images of more than one hundred fieldsmore » were obtained in multiple filters. We identified 47 previously unknown galaxy clusters, 41 of which are included in the Planck catalogue of SZ sources. The redshifts of 65 Planck clusters were measured spectroscopically and 14 more were measured photometrically. We discuss the details of cluster optical identifications and redshift measurements. Finally, we also present new spectroscopic redshifts for 39 Planck clusters that were not included in the Planck SZ source catalogue and are published here for the first time.« less

FLY MPI-2: a parallel tree code for LSS

NASA Astrophysics Data System (ADS)

Becciani, U.; Comparato, M.; Antonuccio-Delogu, V.

2006-04-01

New version program summaryProgram title: FLY 3.1 Catalogue identifier: ADSC_v2_0 Licensing provisions: yes Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADSC_v2_0 Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland No. of lines in distributed program, including test data, etc.: 158 172 No. of bytes in distributed program, including test data, etc.: 4 719 953 Distribution format: tar.gz Programming language: Fortran 90, C Computer: Beowulf cluster, PC, MPP systems Operating system: Linux, Aix RAM: 100M words Catalogue identifier of previous version: ADSC_v1_0 Journal reference of previous version: Comput. Phys. Comm. 155 (2003) 159 Does the new version supersede the previous version?: yes Nature of problem: FLY is a parallel collisionless N-body code for the calculation of the gravitational force Solution method: FLY is based on the hierarchical oct-tree domain decomposition introduced by Barnes and Hut (1986) Reasons for the new version: The new version of FLY is implemented by using the MPI-2 standard: the distributed version 3.1 was developed by using the MPICH2 library on a PC Linux cluster. Today the FLY performance allows us to consider the FLY code among the most powerful parallel codes for tree N-body simulations. Another important new feature regards the availability of an interface with hydrodynamical Paramesh based codes. Simulations must follow a box large enough to accurately represent the power spectrum of fluctuations on very large scales so that we may hope to compare them meaningfully with real data. The number of particles then sets the mass resolution of the simulation, which we would like to make as fine as possible. The idea to build an interface between two codes, that have different and complementary cosmological tasks, allows us to execute complex cosmological simulations with FLY, specialized for DM evolution, and a code specialized for hydrodynamical components that uses a Paramesh block structure. Summary of revisions: The parallel communication schema was totally changed. The new version adopts the MPICH2 library. Now FLY can be executed on all Unix systems having an MPI-2 standard library. The main data structure, is declared in a module procedure of FLY (fly_h.F90 routine). FLY creates the MPI Window object for one-sided communication for all the shared arrays, with a call like the following: CALL MPI_WIN_CREATE(POS, SIZE, REAL8, MPI_INFO_NULL, MPI_COMM_WORLD, WIN_POS, IERR) the following main window objects are created: win_pos, win_vel, win_acc: particles positions velocities and accelerations, win_pos_cell, win_mass_cell, win_quad, win_subp, win_grouping: cells positions, masses, quadrupole momenta, tree structure and grouping cells. Other windows are created for dynamic load balance and global counters. Restrictions: The program uses the leapfrog integrator schema, but could be changed by the user. Unusual features: FLY uses the MPI-2 standard: the MPICH2 library on Linux systems was adopted. To run this version of FLY the working directory must be shared among all the processors that execute FLY. Additional comments: Full documentation for the program is included in the distribution in the form of a README file, a User Guide and a Reference manuscript. Running time: IBM Linux Cluster 1350, 512 nodes with 2 processors for each node and 2 GB RAM for each processor, at Cineca, was adopted to make performance tests. Processor type: Intel Xeon Pentium IV 3.0 GHz and 512 KB cache (128 nodes have Nocona processors). Internal Network: Myricom LAN Card "C" Version and "D" Version. Operating System: Linux SuSE SLES 8. The code was compiled using the mpif90 compiler version 8.1 and with basic optimization options in order to have performances that could be useful compared with other generic clusters Processors

Study on Seismicity of Sino-Mongolia Arc Areas

NASA Astrophysics Data System (ADS)

Xu, Guangyin; Wang, Suyun

2016-04-01

Using the earthquake catalogue from China, Mongolia and the global catalogue, the uniform catalogue of North China, Mongolia and adjacent areas, which is within the region 80-130°E, 40-55°N, has been established by Institute of Geophysics, China Earthquake Administration and Research Center of Astronomy and Geophysics, Mongolian Academy of Science for the seismic hazard analysis and seismic zoning map of Mongolia according to the following principles. 1) Earthquakes, which just exist in one catalogue, need to be verified further. If the earthquakes occurred in the country where the catalog comes from, then they will be adopted. If not, it should be checked with other more data. 2) The events that come from the three data sources have be checked and verified as followings. (1) The parameters of earthquakes that occurred in China will be taken from China catalog. (2)The parameters of earthquakes that occurred in Mongolia will be taken from Mongolia catalog. (3) The parameters of earthquakes that occurred in the adjacent areas will be taken from the global catalog by Song et al. According to the uniform catalogue, the seismicity of the North China, Mongolia and adjacent areas is analyzed, and the conclusions as followings are made. 1) The epicenter map can be roughly divided into two parts, bounded by the longitude line 105°E , in accordance with the "North-South Seismic Belt" of China. The seismicity is in a high level with many strong earthquakes in the west and is in a low level with little strong events in the east. 2) Most earthquakes are shallow-focus events, but there are also several middle or deep-focus events in the study area. 3) Earthquakes with magnitude greater than 5 are basically complete since 1450 A.D., and the seismicity of the study areas is in a high level since 1700 A. 4) Two seismic belts, Altay seismic belt and Bolnay-Baikal seismic belt, are determined according to the epicenters and tectonics. 5) The b-values of magnitude - frequency relationship for the whole areas are between 0.6 and 0.7 based on the uniform catalogue, 0.677 for the Altay seismic belt and 0.699 for the Bolnay-Baikal seismic belt. KEY WORDS：Earthquake Catalogue, Seismicity, North China, Mongolia

Photometric redshift requirements for lens galaxies in galaxy-galaxy lensing analyses

NASA Astrophysics Data System (ADS)

Nakajima, R.; Mandelbaum, R.; Seljak, U.; Cohn, J. D.; Reyes, R.; Cool, R.

2012-03-01

Weak gravitational lensing is a valuable probe of galaxy formation and cosmology. Here we quantify the effects of using photometric redshifts (photo-z) in galaxy-galaxy lensing, for both sources and lenses, both for the immediate goal of using galaxies with photo-z as lenses in the Sloan Digital Sky Survey (SDSS) and as a demonstration of methodology for large, upcoming weak lensing surveys that will by necessity be dominated by lens samples with photo-z. We calculate the bias in the lensing mass calibration as well as consequences for absolute magnitude (i.e. k-corrections) and stellar mass estimates for a large sample of SDSS Data Release 8 (DR8) galaxies. The redshifts are obtained with the template-based photo-z code ZEBRA on the SDSS DR8 ugriz photometry. We assemble and characterize the calibration samples (˜9000 spectroscopic redshifts from four surveys) to obtain photometric redshift errors and lensing biases corresponding to our full SDSS DR8 lens and source catalogues. Our tests of the calibration sample also highlight the impact of observing conditions in the imaging survey when the spectroscopic calibration covers a small fraction of its footprint; atypical imaging conditions in calibration fields can lead to incorrect conclusions regarding the photo-z of the full survey. For the SDSS DR8 catalogue, we find σΔz/(1+z)= 0.096 and 0.113 for the lens and source catalogues, with flux limits of r= 21 and 21.8, respectively. The photo-z bias and scatter is a function of photo-z and template types, which we exploit to apply photo-z quality cuts. By using photo-z rather than spectroscopy for lenses, dim blue galaxies and L* galaxies up to z˜ 0.4 can be used as lenses, thus expanding into unexplored areas of parameter space. We also explore the systematic uncertainty in the lensing signal calibration when using source photo-z, and both lens and source photo-z; given the size of existing training samples, we can constrain the lensing signal calibration (and therefore the normalization of the surface mass density) to within 2 and 4 per cent, respectively.

Characterising large scenario earthquakes and their influence on NDSHA maps

NASA Astrophysics Data System (ADS)

Magrin, Andrea; Peresan, Antonella; Panza, Giuliano F.

2016-04-01

The neo-deterministic approach to seismic zoning, NDSHA, relies on physically sound modelling of ground shaking from a large set of credible scenario earthquakes, which can be defined based on seismic history and seismotectonics, as well as incorporating information from a wide set of geological and geophysical data (e.g. morphostructural features and present day deformation processes identified by Earth observations). NDSHA is based on the calculation of complete synthetic seismograms; hence it does not make use of empirical attenuation models (i.e. ground motion prediction equations). From the set of synthetic seismograms, maps of seismic hazard that describe the maximum of different ground shaking parameters at the bedrock can be produced. As a rule, the NDSHA, defines the hazard as the envelope ground shaking at the site, computed from all of the defined seismic sources; accordingly, the simplest outcome of this method is a map where the maximum of a given seismic parameter is associated to each site. In this way, the standard NDSHA maps permit to account for the largest observed or credible earthquake sources identified in the region in a quite straightforward manner. This study aims to assess the influence of unavoidable uncertainties in the characterisation of large scenario earthquakes on the NDSHA estimates. The treatment of uncertainties is performed by sensitivity analyses for key modelling parameters and accounts for the uncertainty in the prediction of fault radiation and in the use of Green's function for a given medium. Results from sensitivity analyses with respect to the definition of possible seismic sources are discussed. A key parameter is the magnitude of seismic sources used in the simulation, which is based on information from earthquake catalogue, seismogenic zones and seismogenic nodes. The largest part of the existing Italian catalogues is based on macroseismic intensities, a rough estimate of the error in peak values of ground motion can therefore be the factor of two, intrinsic in MCS and other discrete scales. A simple test supports this hypothesis: an increase of 0.5 in the magnitude, i.e. one degrees in epicentral MCS, of all sources used in the national scale seismic zoning produces a doubling of the maximum ground motion. The analysis of uncertainty in ground motion maps, due to the catalogue random errors in magnitude and localization, shows a not uniform distribution of ground shaking uncertainty. The available information from catalogues of past events, that is not complete and may well not be representative of future earthquakes, can be substantially completed using independent indicators of the seismogenic potential of a given area, such as active faulting data and the seismogenic nodes.

Coma cluster ultradiffuse galaxies are not standard radio galaxies

NASA Astrophysics Data System (ADS)

Struble, Mitchell F.

2018-02-01

Matching members in the Coma cluster catalogue of ultradiffuse galaxies (UDGs) from SUBARU imaging with a very deep radio continuum survey source catalogue of the cluster using the Karl G. Jansky Very Large Array (VLA) within a rectangular region of ∼1.19 deg2 centred on the cluster core reveals matches consistent with random. An overlapping set of 470 UDGs and 696 VLA radio sources in this rectangular area finds 33 matches within a separation of 25 arcsec; dividing the sample into bins with separations bounded by 5, 10, 20 and 25 arcsec finds 1, 4, 17 and 11 matches. An analytical model estimate, based on the Poisson probability distribution, of the number of randomly expected matches within these same separation bounds is 1.7, 4.9, 19.4 and 14.2, each, respectively, consistent with the 95 per cent Poisson confidence intervals of the observed values. Dividing the data into five clustercentric annuli of 0.1° and into the four separation bins, finds the same result. This random match of UDGs with VLA sources implies that UDGs are not radio galaxies by the standard definition. Those VLA sources having integrated flux >1 mJy at 1.4 GHz in Miller, Hornschemeier and Mobasher without SDSS galaxy matches are consistent with the known surface density of background radio sources. We briefly explore the possibility that some unresolved VLA sources near UDGs could be young, compact, bright, supernova remnants of Type Ia events, possibly in the intracluster volume.

Precise CCD positions of Himalia using Gaia DR1 in 2015-2016

NASA Astrophysics Data System (ADS)

Peng, H. W.; Peng, Q. Y.; Wang, N.

2017-05-01

In order to obtain high-precision CCD positions of Himalia, the sixth Jovian satellite, a total of 598 CCD observations have been obtained during the years 2015-2016. The observations were made by using the 2.4 and 1 m telescopes administered by Yunnan Observatories over 27 nights. Several factors that would influence the positional precision of Himalia were analysed, including the reference star catalogue used, the geometric distortion and the phase effect. By taking advantage of its unprecedented positional precision, the recently released catalogue Gaia Data Release 1 was chosen to match reference stars in the CCD frames of both Himalia and open clusters, which were observed for deriving the geometric distortion. The latest version of sofa library was used to calculate the positions of reference stars. The theoretical positions of Himalia were retrieved from the Jet Propulsion Laboratory Horizons System that includes the satellite ephemeris JUP300, while the positions of Jupiter were based on the planetary ephemeris DE431. Our results showed that the means of observed minus computed (O - C) residuals are 0.071 and -0.001 arcsec in right ascension and declination, respectively. Their standard deviations are estimated at about 0.03 arcsec in each direction.

The apparent overdensity of open clusters in the Canis Major overdensity

NASA Astrophysics Data System (ADS)

Piatti, Andrés E.; Clariá, Juan J.

2008-10-01

The exciting debate on the existence and nature of the relatively recent discovery of the so-called Canis Major (CMa) overdensity is re-examined here based on the positions, reddenings, ages and metallicities of Galactic open clusters (OCs). The data used to carry out the current study were taken from the recently updated version of the Dias et al.'s 1776 OC catalogue. We found that only Tombaugh 2 is physically located within the main body of CMa. Even if we take into account the whole sample of catalogued OCs with unknown distances, it is statistically expected that only one additional OC could be found within the CMa region. Since the CMa overdensity appears to be quite transparent to dust, only a few OCs in that zone could have been missed. Both metallicity and age distributions of OCs located in the Galactic outer disc, including Tombaugh 2 and those projected on to CMa, are in good agreement with the paradigm of a main dispersion of age and metallicity values. There are only marginal indications for a radial abundance variation. We conclude that CMa does not contain a significant population of OCs which share its properties. This result does not favour the dwarf galaxy scenario.

Space Object Detection and Tracking Within a Finite Set Statistics Framework

DTIC Science & Technology

2017-04-13

Software for source extraction. Astronomy and Astrophysics Supplement Series, 117(2):393–404, 1996. [4] William M. Bolstad. Introduction to Bayesian...Urban, T Corbin, G Wycoff, Ulrich Bastian, Peter Schwekendiek, and A Wicenec. The tycho-2 catalogue of the 2.5 million brightest stars. Astronomy and

Contemporary Art of Kenya: A Different Perspective

ERIC Educational Resources Information Center

Kader, Themina

2006-01-01

There is plenty of literature, including exhibition catalogues, journal articles, and books written for those interested in learning and teaching about African art. Information on individual artists from the countries of Africa is also increasing. These sources attempt to highlight the artists' lives, education, working conditions and what they…

Researching Australian Children's Literature

ERIC Educational Resources Information Center

Saxby, Maurice

2004-01-01

When in 1962 the author began to research the history of Australian children's literature, access to the primary sources was limited and difficult. From a catalogue drawer in the Mitchell Library of hand-written cards marked "Children's books" he could call up from the stacks, in alphabetical order, piles of early publications. His notes…

World Data Center A (rockets and satellites) catalogue of data. Volume 1, part A: Sounding rockets

NASA Technical Reports Server (NTRS)

1972-01-01

A cumulative listing of all scientifically successful rockets that have been identified from various sources is presented. The listing starts with the V-2 rocket launched on 7 March 1947 and contains all rockets identified up to 31 December 1971.

ESASky: All the sky you need

NASA Astrophysics Data System (ADS)

De Marchi, Guido; ESASky Team

2018-06-01

ESASky is a discovery portal giving to all astronomers, professional and amateur alike, an easy way to access high-quality scientific data from their computer, tablet, or mobile device. It includes over half a million images, 300,000 spectra, and more than a billion catalogue sources. From gamma rays to radio wavelengths, it allows users to explore the cosmos with data from a dozen space missions from the astronomical archives of ESA, NASA, and JAXA and does not require prior knowledge of any particular mission. ESASky features an all-sky exploration interface, letting users easily zoom in for stars as single targets or as part of a whole galaxy, visualise them and retrieve the relevant data taken in an area of the sky with just a few clicks. Users can easily compare observations of the same source obtained by different space missions at different times and wavelengths. They can also use ESASky to plan future observations with the James Webb Space Telescope, comparing the relevant portion of the sky as observed by Hubble and other missions. We will illustrate the many options to visualise and access astronomical data: interactive footprints for each instrument, tree-maps, filters, and solar-system object trajectories can all be combined and displayed. The most recent version of ESASky, released in February, also includes access to scientific publications, allowing users to visualise on the sky all astronomical objects with associated scientific publications and to link directly back to the papers in the NASA Astrophysics Data System.

New Open-Source Version of FLORIS Released | News | NREL

Science.gov Websites

New Open-Source Version of FLORIS Released New Open-Source Version of FLORIS Released January 26 , 2018 National Renewable Energy Laboratory (NREL) researchers recently released an updated open-source simplified and documented. Because of the living, open-source nature of the newly updated utility, NREL

VizieR Online Data Catalog: HST Frontier Fields Herschel sources (Rawle+, 2016)

NASA Astrophysics Data System (ADS)

Rawle, T. D.; Altieri, B.; Egami, E.; Perez-Gonzalez, P. G.; Boone, F.; Clement, B.; Ivison, R. J.; Richard, J.; Rujopakarn, W.; Valtchanov, I.; Walth, G.; Weiner, B. J.; Blain, A. W.; Dessauges-Zavadsky, M.; Kneib, J.-P.; Lutz, D.; Rodighiero, G.; Schaerer, D.; Smail, I.

2017-07-01

We present a complete census of the 263 Herschel-detected sources within the HST Frontier Fields, including 163 lensed sources located behind the clusters. Our primary aim is to provide a robust legacy catalogue of the Herschel fluxes, which we combine with archival data from Spitzer and WISE to produce IR SEDs. We optimally combine the IR photometry with data from HST, VLA and ground-based observatories in order to identify optical counterparts and gain source redshifts. Each cluster is observed in two distinct regions, referred to as the central and parallel footprints. (2 data files).

Automated cross-identifying radio to infrared surveys using the LRPY algorithm: a case study

NASA Astrophysics Data System (ADS)

Weston, S. D.; Seymour, N.; Gulyaev, S.; Norris, R. P.; Banfield, J.; Vaccari, M.; Hopkins, A. M.; Franzen, T. M. O.

2018-02-01

Cross-identifying complex radio sources with optical or infra red (IR) counterparts in surveys such as the Australia Telescope Large Area Survey (ATLAS) has traditionally been performed manually. However, with new surveys from the Australian Square Kilometre Array Pathfinder detecting many tens of millions of radio sources, such an approach is no longer feasible. This paper presents new software (LRPY - Likelihood Ratio in PYTHON) to automate the process of cross-identifying radio sources with catalogues at other wavelengths. LRPY implements the likelihood ratio (LR) technique with a modification to account for two galaxies contributing to a sole measured radio component. We demonstrate LRPY by applying it to ATLAS DR3 and a Spitzer-based multiwavelength fusion catalogue, identifying 3848 matched sources via our LR-based selection criteria. A subset of 1987 sources have flux density values for all IRAC bands which allow us to use criteria to distinguish between active galactic nuclei (AGNs) and star-forming galaxies (SFG). We find that 936 radio sources ( ≈ 47 per cent) meet both of the Lacy and Stern AGN selection criteria. Of the matched sources, 295 have spectroscopic redshifts and we examine the radio to IR flux ratio versus redshift, proposing an AGN selection criterion below the Elvis radio-loud AGN limit for this dataset. Taking the union of all three AGNs selection criteria we identify 956 as AGNs ( ≈ 48 per cent). From this dataset, we find a decreasing fraction of AGNs with lower radio flux densities consistent with other results in the literature.

Estimating photometric redshifts for X-ray sources in the X-ATLAS field using machine-learning techniques

NASA Astrophysics Data System (ADS)

Mountrichas, G.; Corral, A.; Masoura, V. A.; Georgantopoulos, I.; Ruiz, A.; Georgakakis, A.; Carrera, F. J.; Fotopoulou, S.

2017-12-01

We present photometric redshifts for 1031 X-ray sources in the X-ATLAS field using the machine-learning technique TPZ. X-ATLAS covers 7.1 deg2 observed with XMM-Newton within the Science Demonstration Phase of the H-ATLAS field, making it one of the largest contiguous areas of the sky with both XMM-Newton and Herschel coverage. All of the sources have available SDSS photometry, while 810 additionally have mid-IR and/or near-IR photometry. A spectroscopic sample of 5157 sources primarily in the XMM/XXL field, but also from several X-ray surveys and the SDSS DR13 redshift catalogue, was used to train the algorithm. Our analysis reveals that the algorithm performs best when the sources are split, based on their optical morphology, into point-like and extended sources. Optical photometry alone is not enough to estimate accurate photometric redshifts, but the results greatly improve when at least mid-IR photometry is added in the training process. In particular, our measurements show that the estimated photometric redshifts for the X-ray sources of the training sample have a normalized absolute median deviation, nmad ≈ 0.06, and a percentage of outliers, η = 10-14%, depending upon whether the sources are extended or point like. Our final catalogue contains photometric redshifts for 933 out of the 1031 X-ray sources with a median redshift of 0.9. The table of the photometric redshifts is only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/608/A39

William Herschel's 'Hole in the Sky' and the discovery of dark nebulae

NASA Astrophysics Data System (ADS)

Steinicke, Wolfgang

2016-12-01

In 1785 William Herschel published a paper in the Philosophical Transactions containing the remarkable section "An opening or hole". It describes an unusual vacant place in Scorpius. This matter falls into oblivion until Caroline Herschel initiated a correspondence with her nephew John in 1833. It contains Herschel's spectacular words "Hier ist wahrhaftig ein Loch im Himmel" ("Here truly is a hole in the sky"). About a hundred years later, Johann Georg Hagen, Director of the Vatican Observatory, presented a spectacular candidate for the 'hole', discovered in 1857 by Angelo Secchi in Sagittarius and later catalogued by Edward E. Barnard as the dark nebula B 86. Hagen's claim initiated a debate, mainly in the Journal of the British Astronomical Association, about the identity of Herschel's 'object'. Though things could be partly cleared up, unjustified claims still remain. This is mainly due to the fact that original sources were not consulted. A comprehensive study of the curious 'hole' is presented here. It covers major parts of the epochal astronomical work of William, Caroline and John Herschel. This includes a general study of 'vacant places', found by William Herschel and others, and the speculations about their nature, eventually leading to the finding that dark nebulae are due to absorbing interstellar matter. Some of the 'vacant places' could be identified in catalogues of dark nebulae and this leads to a 'Herschel Catalogue of Dark Nebulae' - the first historic catalogue of its kind.

Documentation for the machine-readable version of the catalogue of individual UBV and UVBY beta observations in the region of the Orion OB1 association

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1982-01-01

The machine-readable files of individual UBV observations of 106 stars in the vicinity of the Orion Nebula (the Sword region) and individual uvby beta observations of 508 stars in all regions of the Orion OB 1 association are described. For the UBV data the stars are identified by their Brun numbers, with cross identifications to the chart numbers used in Warren and Hesser; the uv by beta stars are identified by the aforementioned chart numbers and HD, BD or P ( = pi); numbers in that order of preference.

The radio and optical counterpart of the new Fermi LAT flaring source J0109+6134

NASA Astrophysics Data System (ADS)

Paredes, J. M.; Martí, J.; Peracaula, M.

2010-02-01

Following the recent ATELs #2414, #2416 and #2420 concerning the Fermi-LAT, AGILE and Swift/XRT consistent detections of the new gamma-ray flaring source J0109+6134, we wish to remind that the proposed radio counterpart (VCS2 J0109+6133/GT 0106+613) was extensively observed nearly two decades ago by different authors in the context of the GT catalogue of Galactic Plane radio sources (Taylor and Gregory 1983, AJ, 88, 1784; Gregory and Taylor 1986, AJ 92, 371).

Filaments in Lupus I

NASA Astrophysics Data System (ADS)

Takahashi, Satoko; Rodon, J.; De Gregorio-Monsalvo, I.; Plunkett, A.

2017-06-01

The mechanisms behind the formation of sub-stellar mass sources are key to determine the populations at the low-mass end of the stellar distribution. Here, we present mapping observations toward the Lupus I cloud in C18O(2-1) and 13CO(2-1) obtained with APEX. We have identified a few velocity-coherent filaments. Each contains several substellar mass sources that are also identified in the 1.1mm continuum data (see also SOLA catalogue presentation). We will discuss the velocity structure, fragmentation properties of the identified filaments, and the nature of the detected sources.

VizieR Online Data Catalog: Optical ident. and redshifts of Planck SZ sources (Planck+, 2016)

NASA Astrophysics Data System (ADS)

Planck Collaboration; Ade, P. A. R.; Aghanim, N.; Arnaud, M.; Ashdown, M.; Aumont, J.; Baccigalupi, C.; Banday, A. J.; Barreiro, R. B.; Barrena, R.; Bartolo, N.; Battaner, E.; Benabed, K.; Benoit-Levy, A.; Bernard, J.-P.; Bersanelli, M.; Bielewicz, P.; Bikmaev, I.; Boehringer, H.; Bonaldi, A.; Bonavera, L.; Bond, J. R.; Borrill, J.; Bouchet, F. R.; Burenin, R.; Burigana, C.; Calabrese, E.; Cardoso, J.-F.; Catalano, A.; Chamballu, A.; Chary, R.-R.; Chiang, H. C.; Chon, G.; Christensen, P. R.; Clements, D. L.; Colombo, L. P. L.; Combet, C.; Comis, B.; Crill, B. P.; Curto, A.; Cuttaia, F.; Dahle, H.; Danese, L.; Davies, R. D.; Davis, R. J.; de Bernardis, P.; De Rosa, A.; de Zotti, G.; Delabrouille, J.; Diego, J. M.; Dole, H.; Donzelli, S.; Dore, O.; Douspis, M.; Dupac, X.; Efstathiou, G.; Elsner, F.; Ensslin, T. A.; Eriksen, H. K.; Ferragamo, A.; Finelli, F.; Forni, O.; Frailis, M.; Fraisse, A. A.; Franceschi, E.; Fromenteau, S.; Galeotta, S.; Galli, S.; Ganga, K.; Genova-Santos, R. T.; Giard, M.; Gjerlow, E.; Gonzalez-Nuevo, J.; Gorski, K. M.; Gruppuso, A.; Hansen, F. K.; Harrison, D. L.; Hempel, A.; Hernandez-Monteagudo, C.; Herranz, D.; Hildebrandt, S. R.; Hivon, E.; Hornstrup, A.; Hovest, W.; Huffenberger, K. M.; Hurier, G.; Jaffe, T. R.; Keihaenen, E.; Keskitalo, R.; Khamitov, I.; Kisner, T. S.; Kneissl, R.; Knoche, J.; Kunz, M.; Kurki-Suonio, H.; Lamarre, J.-M.; Lasenby, A.; Lattanzi, M.; Lawrence, C. R.; Leonardi, R.; Leon-Tavares, J.; Levrier, F.; Lietzen, H.; Liguori, M.; Lilje, P. B.; Linden-Vornle, M.; Lopez-Caniego, M.; Lubin, P. M.; Macias-Perez, J. F.; Maffei, B.; Maino, D.; Mandolesi, N.; Maris, M.; Martin, P. G.; Martinez-Gonzalez, E.; Masi, S.; Matarrese, S.; McGehee, P.; Melchiorri, A.; Mennella, A.; Migliaccio, M.; Miville-Deschenes, M.-A.; Moneti, A.; Montier, L.; Morgante, G.; Mortlock, D.; Munshi, D.; Murphy, J. A.; Naselsky, P.; Nati, F.; Natoli, P.; Novikov, D.; Novikov, I.; Oxborrow, C. A.; Pagano, L.; Pajot, F.; Paoletti, D.; Pasian, F.; Perdereau, O.; Pettorino, V.; Piacentini, F.; Piat, M.; Pierpaoli, E.; Plaszczynski, S.; Pointecouteau, E.; Polenta, G.; Pratt, G. W.; Prunet, S.; Puget, J.-L.; Rachen J. P.; Rebol, O. R.; Reinecke, M.; Remazeilles, M.; Renault, C.; Renzi, A.; Ristorcelli, I.; Rocha, G.; Rosset, C.; Rossetti, M.; Roudier, G.; Rubino-Martin, J. A.; Rusholme, B.; Sandri, M.; Santos, D.; Savelainen, M.; Savini, G.; Scott, D.; Stolyarov, V.; Streblyanska, A.; Sudiwala, R.; Sunyaev, R.; Suur-Uski, A.-S.; Sygnet, J.-F.; Tauber, J. A.; Terenzi, L.; Toffolatti, L.; Tomasi, M.; Tramonte, D.; Tristram, M.; Tucci, M.; Valenziano, L.; Valiviita, J.; van Tent, B.; Vielva, P.; Villa, F.; Wade, L. A.; Wandelt, B. D.; Wehus, I. K.; Yvon, D.; Zacchei, A.; Zonca, A.

2016-04-01

This article is a companion paper to the Planck catalogue of SZ sources (PSZ1) published in Planck Collaboration XXIX (2014, Cat. J/A+A/581/A14). It contains the results of approximately three years of observations with telescopes at the Canary Islands observatories (IAC80, NOT, INT, TNG, WHT, and GTC), as part of the general optical follow-up programme undertaken by the Planck Collaboration. (2 data files).

Manual of Documentation Practices Applicable to Defence-Aerospace Scientific and Technical Information. Volume 1. Section 1 - Acquisition and Sources. Section 2 - Descriptive Cataloguing. Section 3 - Abstracting and Subject Analysis

DTIC Science & Technology

1978-08-01

weeding I I ORGANISATION & MANAGEMENT Aims and objectives, staffing, promotional activities, identifying u;ers 12 NETWORKS & EXTERNAL SOURCES OF...Acquisition Clerks with typing capability are required for meticulous recordkeeping. Typing capability of 50 words per minute and a working knowledge ...81 Adminhistration and Management Includes management planning and research. 64 Numerical Analysis Includes iteration, difference equations, and 82

Low-frequency radio constraints on the synchrotron cosmic web

NASA Astrophysics Data System (ADS)

Vernstrom, T.; Gaensler, B. M.; Brown, S.; Lenc, E.; Norris, R. P.

2017-06-01

We present a search for the synchrotron emission from the synchrotron cosmic web by cross-correlating 180-MHz radio images from the Murchison Widefield Array with tracers of large-scale structure (LSS). We use two versions of the radio image covering 21.76° × 21.76° with point sources brighter than 0.05 Jy subtracted, with and without filtering of Galactic emission. As tracers of the LSS, we use the Two Micron All-Sky Survey and the Wide-field InfraRed Explorer redshift catalogues to produce galaxy number density maps. The cross-correlation functions all show peak amplitudes at 0°, decreasing with varying slopes towards zero correlation over a range of 1°. The cross-correlation signals include components from point source, Galactic, and extragalactic diffuse emission. We use models of the diffuse emission from smoothing the density maps with Gaussians of sizes 1-4 Mpc to find limits on the cosmic web components. From these models, we find surface brightness 99.7 per cent upper limits in the range of 0.09-2.20 mJy beam-1 (average beam size of 2.6 arcmin), corresponding to 0.01-0.30 mJy arcmin-2. Assuming equipartition between energy densities of cosmic rays and the magnetic field, the flux density limits translate to magnetic field strength limits of 0.03-1.98 μG, depending heavily on the spectral index. We conclude that for a 3σ detection of 0.1 μG magnetic field strengths via cross-correlations, image depths of sub-mJy to sub-μJy are necessary. We include discussion on the treatment and effect of extragalactic point sources and Galactic emission, and next steps for building on this work.

Efficient self-consistency for magnetic tight binding

NASA Astrophysics Data System (ADS)

Soin, Preetma; Horsfield, A. P.; Nguyen-Manh, D.

2011-06-01

Tight binding can be extended to magnetic systems by including an exchange interaction on an atomic site that favours net spin polarisation. We have used a published model, extended to include long-ranged Coulomb interactions, to study defects in iron. We have found that achieving self-consistency using conventional techniques was either unstable or very slow. By formulating the problem of achieving charge and spin self-consistency as a search for stationary points of a Harris-Foulkes functional, extended to include spin, we have derived a much more efficient scheme based on a Newton-Raphson procedure. We demonstrate the capabilities of our method by looking at vacancies and self-interstitials in iron. Self-consistency can indeed be achieved in a more efficient and stable manner, but care needs to be taken to manage this. The algorithm is implemented in the code PLATO. Program summaryProgram title:PLATO Catalogue identifier: AEFC_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEFC_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 228 747 No. of bytes in distributed program, including test data, etc.: 1 880 369 Distribution format: tar.gz Programming language: C and PERL Computer: Apple Macintosh, PC, Unix machines Operating system: Unix, Linux, Mac OS X, Windows XP Has the code been vectorised or parallelised?: Yes. Up to 256 processors tested RAM: Up to 2 Gbytes per processor Classification: 7.3 External routines: LAPACK, BLAS and optionally ScaLAPACK, BLACS, PBLAS, FFTW Catalogue identifier of previous version: AEFC_v1_0 Journal reference of previous version: Comput. Phys. Comm. 180 (2009) 2616 Does the new version supersede the previous version?: Yes Nature of problem: Achieving charge and spin self-consistency in magnetic tight binding can be very difficult. Our existing schemes failed altogether, or were very slow. Solution method: A new scheme for achieving self-consistency in orthogonal tight binding has been introduced that explicitly evaluates the first and second derivatives of the energy with respect to input charge and spin, and then uses these to search for stationary values of the energy. Reasons for new version: Bug fixes and new functionality. Summary of revisions: New charge and spin mixing scheme for orthogonal tight binding. Numerous small bug fixes. Restrictions: The new mixing scheme scales poorly with system size. In particular the memory usage scales as number of atoms to the power 4. It is restricted to systems with about 200 atoms or less. Running time: Test cases will run in a few minutes, large calculations may run for several days.

Source clustering in the Hi-GAL survey determined using a minimum spanning tree method

NASA Astrophysics Data System (ADS)

Beuret, M.; Billot, N.; Cambrésy, L.; Eden, D. J.; Elia, D.; Molinari, S.; Pezzuto, S.; Schisano, E.

2017-01-01

Aims: The aims are to investigate the clustering of the far-infrared sources from the Herschel infrared Galactic Plane Survey (Hi-GAL) in the Galactic longitude range of -71 to 67 deg. These clumps, and their spatial distribution, are an imprint of the original conditions within a molecular cloud. This will produce a catalogue of over-densities. Methods: The minimum spanning tree (MST) method was used to identify the over-densities in two dimensions. The catalogue was further refined by folding in heliocentric distances, resulting in more reliable over-densities, which are cluster candidates. Results: We found 1633 over-densities with more than ten members. Of these, 496 are defined as cluster candidates because of the reliability of the distances, with a further 1137 potential cluster candidates. The spatial distributions of the cluster candidates are different in the first and fourth quadrants, with all clusters following the spiral structure of the Milky Way. The cluster candidates are fractal. The clump mass functions of the clustered and isolated are statistically indistinguishable from each other and are consistent with Kroupa's initial mass function. Hi-GAL is a key-project of the Herschel Space Observatory survey (Pilbratt et al. 2010) and uses the PACS (Poglitsch et al. 2010) and SPIRE (Griffin et al. 2010) cameras in parallel mode.The catalogues of cluster candidates and potential clusters are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/597/A114

VizieR Online Data Catalog: M33 GALEX catalogue of UV point sources (Mudd+, 2015)

NASA Astrophysics Data System (ADS)

Mudd, D.; Stanek, K. Z.

2015-11-01

This catalogue was made using the Ultraviolet Imaging Telescope (UIT), an instrument aboard the Astro-1 Mission. UIT used photographic plates with the B1 and A1 filters roughly corresponding to the FUV and NUV filters of GALEX, having central wavelengths of ~1500 and 2400Å, respectively. It should be noted, however, that the A1 filter is significantly broader than the NUV filter on GALEX, reaching several hundred angstroms to the red end of its GALEX counterpart. The field of view of UIT is also circular but has a smaller radius of 18 arcmin The FWHM of UIT is comparable to that of GALEX, at 4 and 5.2 arcsec in the NUV and FUV filters, respectively. (3 data files).

The Arecibo Galaxy Environment Survey - VII. A dense filament with extremely long H I streams

NASA Astrophysics Data System (ADS)

Taylor, R.; Minchin, R. F.; Herbst, H.; Davies, J. I.; Rodriguez, R.; Vazquez, C.

2014-09-01

We present completed observations of the NGC 7448 galaxy group and background volume as part of the blind neutral hydrogen Arecibo Galaxy Environment Survey. Our observations cover a region spanning 5°× 4°, over a redshift range of approximately -2000

From Flamsteed to Piazzi and Lalande: new standards in 18th century astrometry

NASA Astrophysics Data System (ADS)

Lequeux, James

2014-07-01

Aims: The present high accuracy of stellar positions and proper motions allows us to determine the positional accuracy of old stellar catalogues. This has already been done for the most important catalogues from before the 18th century. Our aim is to extend this study to several 18th century catalogues. Methods: To do this, I studied ten catalogues: those of Flamsteed and Rømer, four catalogues of La Caille, and catalogues of Tobias Mayer, Bradley, Piazzi, and Lalande. A comparison with modern data, mostly from Hipparcos, compiled in the Simbad database of the CDS allowed me to determine the position errors of these catalogues. I also compared the stellar visual magnitudes given in eight of these catalogues with photometric V magnitudes. Results: Thanks to novel instruments, the rms positional accuracy improved from thousands to hundreds of arcsec in older catalogues to less than one minute in that of Flamsteed, and to 2-6 arcsec in the other catalogues I examined. These improvements allowed for the first time relatively accurate proper motions to be determined by 19th century astronomers. The catalogues with some corrections are available in digital form at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/567/A26

A parallel solver for huge dense linear systems

NASA Astrophysics Data System (ADS)

Badia, J. M.; Movilla, J. L.; Climente, J. I.; Castillo, M.; Marqués, M.; Mayo, R.; Quintana-Ortí, E. S.; Planelles, J.

2011-11-01

HDSS (Huge Dense Linear System Solver) is a Fortran Application Programming Interface (API) to facilitate the parallel solution of very large dense systems to scientists and engineers. The API makes use of parallelism to yield an efficient solution of the systems on a wide range of parallel platforms, from clusters of processors to massively parallel multiprocessors. It exploits out-of-core strategies to leverage the secondary memory in order to solve huge linear systems O(100.000). The API is based on the parallel linear algebra library PLAPACK, and on its Out-Of-Core (OOC) extension POOCLAPACK. Both PLAPACK and POOCLAPACK use the Message Passing Interface (MPI) as the communication layer and BLAS to perform the local matrix operations. The API provides a friendly interface to the users, hiding almost all the technical aspects related to the parallel execution of the code and the use of the secondary memory to solve the systems. In particular, the API can automatically select the best way to store and solve the systems, depending of the dimension of the system, the number of processes and the main memory of the platform. Experimental results on several parallel platforms report high performance, reaching more than 1 TFLOP with 64 cores to solve a system with more than 200 000 equations and more than 10 000 right-hand side vectors. New version program summaryProgram title: Huge Dense System Solver (HDSS) Catalogue identifier: AEHU_v1_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHU_v1_1.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 87 062 No. of bytes in distributed program, including test data, etc.: 1 069 110 Distribution format: tar.gz Programming language: Fortran90, C Computer: Parallel architectures: multiprocessors, computer clusters Operating system: Linux/Unix Has the code been vectorized or parallelized?: Yes, includes MPI primitives. RAM: Tested for up to 190 GB Classification: 6.5 External routines: MPI ( http://www.mpi-forum.org/), BLAS ( http://www.netlib.org/blas/), PLAPACK ( http://www.cs.utexas.edu/~plapack/), POOCLAPACK ( ftp://ftp.cs.utexas.edu/pub/rvdg/PLAPACK/pooclapack.ps) (code for PLAPACK and POOCLAPACK is included in the distribution). Catalogue identifier of previous version: AEHU_v1_0 Journal reference of previous version: Comput. Phys. Comm. 182 (2011) 533 Does the new version supersede the previous version?: Yes Nature of problem: Huge scale dense systems of linear equations, Ax=B, beyond standard LAPACK capabilities. Solution method: The linear systems are solved by means of parallelized routines based on the LU factorization, using efficient secondary storage algorithms when the available main memory is insufficient. Reasons for new version: In many applications we need to guarantee a high accuracy in the solution of very large linear systems and we can do it by using double-precision arithmetic. Summary of revisions: Version 1.1 Can be used to solve linear systems using double-precision arithmetic. New version of the initialization routine. The user can choose the kind of arithmetic and the values of several parameters of the environment. Running time: About 5 hours to solve a system with more than 200 000 equations and more than 10 000 right-hand side vectors using double-precision arithmetic on an eight-node commodity cluster with a total of 64 Intel cores.

HELAC-PHEGAS: A generator for all parton level processes

NASA Astrophysics Data System (ADS)

Cafarella, Alessandro; Papadopoulos, Costas G.; Worek, Malgorzata

2009-10-01

The updated version of the HELAC-PHEGAS event generator is presented. The matrix elements are calculated through Dyson-Schwinger recursive equations using color connection representation. Phase-space generation is based on a multichannel approach, including optimization. HELAC-PHEGAS generates parton level events with all necessary information, in the most recent Les Houches Accord format, for the study of any process within the Standard Model in hadron and lepton colliders. New version program summaryProgram title: HELAC-PHEGAS Catalogue identifier: ADMS_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADMS_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 35 986 No. of bytes in distributed program, including test data, etc.: 380 214 Distribution format: tar.gz Programming language: Fortran Computer: All Operating system: Linux Classification: 11.1, 11.2 External routines: Optionally Les Houches Accord (LHA) PDF Interface library ( http://projects.hepforge.org/lhapdf/) Catalogue identifier of previous version: ADMS_v1_0 Journal reference of previous version: Comput. Phys. Comm. 132 (2000) 306 Does the new version supersede the previous version?: Yes, partly Nature of problem: One of the most striking features of final states in current and future colliders is the large number of events with several jets. Being able to predict their features is essential. To achieve this, the calculations need to describe as accurately as possible the full matrix elements for the underlying hard processes. Even at leading order, perturbation theory based on Feynman graphs runs into computational problems, since the number of graphs contributing to the amplitude grows as n!. Solution method: Recursive algorithms based on Dyson-Schwinger equations have been developed recently in order to overcome the computational obstacles. The calculation of the amplitude, using Dyson-Schwinger recursive equations, results in a computational cost growing asymptotically as 3 n, where n is the number of particles involved in the process. Off-shell subamplitudes are introduced, for which a recursion relation has been obtained allowing to express an n-particle amplitude in terms of subamplitudes, with 1-, 2-, … up to (n-1) particles. The color connection representation is used in order to treat amplitudes involving colored particles. In the present version HELAC-PHEGAS can be used to efficiently obtain helicity amplitudes, total cross sections, parton-level event samples in LHA format, for arbitrary multiparticle processes in the Standard Model in leptonic, pp¯ and pp collisions. Reasons for new version: Substantial improvements, major functionality upgrade. Summary of revisions: Color connection representation, efficient integration over PDF via the PARNI algorithm, interface to LHAPDF, parton level events generated in the most recent LHA format, k reweighting for Parton Shower matching, numerical predictions for amplitudes for arbitrary processes for phase-space points provided by the user, new user interface and the possibility to run over computer clusters. Running time: Depending on the process studied. Usually from seconds to hours. References:A. Kanaki, C.G. Papadopoulos, Comput. Phys. Comm. 132 (2000) 306. C.G. Papadopoulos, Comput. Phys. Comm. 137 (2001) 247. URL: http://www.cern.ch/helac-phegas.

High–frequency cluster radio galaxies: Luminosity functions and implications for SZE–selected cluster samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gupta, Nikhel; Saro, A.; Mohr, J. J.

We study the overdensity of point sources in the direction of X-ray-selected galaxy clusters from the meta-catalogue of X-ray-detected clusters of galaxies (MCXC; < z > = 0.14) at South Pole Telescope (SPT) and Sydney University Molonglo Sky Survey (SUMSS) frequencies. Flux densities at 95, 150 and 220 GHz are extracted from the 2500 deg 2 SPT-SZ survey maps at the locations of SUMSS sources, producing a multifrequency catalogue of radio galaxies. In the direction of massive galaxy clusters, the radio galaxy flux densities at 95 and 150 GHz are biased low by the cluster Sunyaev–Zel’dovich Effect (SZE) signal, whichmore » is negative at these frequencies. We employ a cluster SZE model to remove the expected flux bias and then study these corrected source catalogues. We find that the high-frequency radio galaxies are centrally concentrated within the clusters and that their luminosity functions (LFs) exhibit amplitudes that are characteristically an order of magnitude lower than the cluster LF at 843 MHz. We use the 150 GHz LF to estimate the impact of cluster radio galaxies on an SPT-SZ like survey. The radio galaxy flux typically produces a small bias on the SZE signal and has negligible impact on the observed scatter in the SZE mass–observable relation. If we assume there is no redshift evolution in the radio galaxy LF then 1.8 ± 0.7 per cent of the clusters with detection significance ξ ≥ 4.5 would be lost from the sample. As a result, allowing for redshift evolution of the form (1 + z) 2.5 increases the incompleteness to 5.6 ± 1.0 per cent. Improved constraints on the evolution of the cluster radio galaxy LF require a larger cluster sample extending to higher redshift.« less

High–frequency cluster radio galaxies: Luminosity functions and implications for SZE–selected cluster samples

DOE PAGES

Gupta, Nikhel; Saro, A.; Mohr, J. J.; ...

2017-01-15

We study the overdensity of point sources in the direction of X-ray-selected galaxy clusters from the meta-catalogue of X-ray-detected clusters of galaxies (MCXC; < z > = 0.14) at South Pole Telescope (SPT) and Sydney University Molonglo Sky Survey (SUMSS) frequencies. Flux densities at 95, 150 and 220 GHz are extracted from the 2500 deg 2 SPT-SZ survey maps at the locations of SUMSS sources, producing a multifrequency catalogue of radio galaxies. In the direction of massive galaxy clusters, the radio galaxy flux densities at 95 and 150 GHz are biased low by the cluster Sunyaev–Zel’dovich Effect (SZE) signal, whichmore » is negative at these frequencies. We employ a cluster SZE model to remove the expected flux bias and then study these corrected source catalogues. We find that the high-frequency radio galaxies are centrally concentrated within the clusters and that their luminosity functions (LFs) exhibit amplitudes that are characteristically an order of magnitude lower than the cluster LF at 843 MHz. We use the 150 GHz LF to estimate the impact of cluster radio galaxies on an SPT-SZ like survey. The radio galaxy flux typically produces a small bias on the SZE signal and has negligible impact on the observed scatter in the SZE mass–observable relation. If we assume there is no redshift evolution in the radio galaxy LF then 1.8 ± 0.7 per cent of the clusters with detection significance ξ ≥ 4.5 would be lost from the sample. As a result, allowing for redshift evolution of the form (1 + z) 2.5 increases the incompleteness to 5.6 ± 1.0 per cent. Improved constraints on the evolution of the cluster radio galaxy LF require a larger cluster sample extending to higher redshift.« less

Establishing a Dynamic Database of Blue and Fin Whale Locations from Recordings at the IMS CTBTO hydro-acoustic network. The Baleakanta Project

NASA Astrophysics Data System (ADS)

Le Bras, R. J.; Kuzma, H.

2013-12-01

Falling as they do into the frequency range of continuously recording hydrophones (15-100Hz), blue and fin whale songs are a significant source of noise on the hydro-acoustic monitoring array of the International Monitoring System (IMS) of the Comprehensive Nuclear Test Ban Treaty Organization (CTBTO). One researcher's noise, however, can be a very interesting signal in another field of study. The aim of the Baleakanta Project (www.baleakanta.org) is to flag and catalogue these songs, using the azimuth and slowness of the signal measured at multiple hydrophones to solve for the approximate location of singing whales. Applying techniques borrowed from human speaker identification, it may even be possible to recognize the songs of particular individuals. The result will be a dynamic database of whale locations and songs with known individuals noted. This database will be of great value to marine biologists studying cetaceans, as there is no existing dataset which spans the globe over many years (more than 15 years of data have been collected by the IMS). Current whale song datasets from other sources are limited to detections made on small, temporary listening devices. The IMS song catalogue will make it possible to study at least some aspects of the global migration patterns of whales, changes in their songs over time, and the habits of individuals. It is believed that about 10 blue whale 'cultures' exist with distinct vocal patterns; the IMS song catalogue will test that number. Results and a subset of the database (delayed in time to mitigate worries over whaling and harassment of the animals) will be released over the web. A traveling museum exhibit is planned which will not only educate the public about whale songs, but will also make the CTBTO and its achievements more widely known. As a testament to the public's enduring fascination with whales, initial funding for this project has been crowd-sourced through an internet campaign.

New constraints on the X-ray spectral properties of type 1 active galactic nuclei

NASA Astrophysics Data System (ADS)

Scott, A. E.; Stewart, G. C.; Mateos, S.; Alexander, D. M.; Hutton, S.; Ward, M. J.

2011-10-01

We present a detailed characterization of the X-ray spectral properties of 761 type 1 active galactic nuclei (AGN), selected from a cross-correlation of the SDSS DR5 quasar catalogue and the incremental version of the second XMM-Newton serendipitous X-ray source catalogue 2XMMi-DR2. The X-ray spectrum of each source has been fitted with models based on a simple power law to which additional cold absorption and/or soft-excess features have been added if an F-test at 99 per cent significance required them. The distribution of best-fitting photon indices, Γ, has been fitted with a Gaussian with mean <Γ>= 1.99 ± 0.01 and dispersion σ<Γ>= 0.30 ± 0.01; however, this does not provide a good representation of the distribution due to sources with very flat or steep Γ values. A highly significant trend for decreasing Γ values with increasing 2-10 keV luminosity, LX, has been seen but only a weak trend with redshift has been found. Intrinsic cold absorption has been detected in ˜4 per cent of the sample and soft-excess emission has been detected in ˜8 per cent. These values are lower limits due to the detectability being limited by the quality of the spectra and we suggest that the intrinsic values may be as high as ˜25 and ˜80 per cent, respectively. The levels of rest-frame absorption are higher than expected for type 1 objects (NH= 1021-1023 cm-2) and the fraction of absorbed sources and the NH values were not seen to vary with LX or z. The average blackbody temperature used to model the soft excesses is = 0.17 ± 0.09 keV. This temperature has been found to correlate with LX but not the blackbody luminosity or the black hole mass which do correlate with each other. A strong correlation has been found between the luminosities in the blackbody and power-law components, suggesting that a similar fraction is reprocessed from the blackbody to the power-law component for the entire luminosity range of objects. A positive correlation between Γ and the X-ray derived Eddington ratio has been found for the sources whose mass was determined using the Hβ line, but a negative correlation has been found where the C IV line was used. No correlation has been found where the Mg II line was used. No significant correlations have been found between the blackbody temperature, luminosity or black hole mass with Eddington ratio, despite a link between the power law and blackbody production being indicated. The sample includes 552 confirmed radio-quiet quasars (RQQ) and 75 confirmed radio-loud quasars (RLQ). The RLQ have been found to have higher LX values than their RQQ counterparts, suggesting an additional X-ray component, perhaps related to a jet, is present in these sources. This component may also be the cause of the flatter Γ values seen in RLQ.

AzTEC millimetre survey of the COSMOS field - I. Data reduction and source catalogue

NASA Astrophysics Data System (ADS)

Scott, K. S.; Austermann, J. E.; Perera, T. A.; Wilson, G. W.; Aretxaga, I.; Bock, J. J.; Hughes, D. H.; Kang, Y.; Kim, S.; Mauskopf, P. D.; Sanders, D. B.; Scoville, N.; Yun, M. S.

2008-04-01

We present a 1.1 mm wavelength imaging survey covering 0.3 deg2 in the COSMOS field. These data, obtained with the AzTEC continuum camera on the James Clerk Maxwell Telescope, were centred on a prominent large-scale structure overdensity which includes a rich X-ray cluster at z ~ 0.73. A total of 50 mm-galaxy candidates, with a significance ranging from 3.5 to 8.5σ, are extracted from the central 0.15 deg2 area which has a uniform sensitivity of ~1.3 mJybeam-1. 16 sources are detected with S/N >= 4.5, where the expected false-detection rate is zero, of which a surprisingly large number (9) have intrinsic (deboosted) fluxes >=5 mJy at 1.1 mm. Assuming the emission is dominated by radiation from dust, heated by a massive population of young, optically obscured stars, then these bright AzTEC sources have far-infrared luminosities >6 × 1012Lsolar and star formation rates >1100Msolaryr-1. Two of these nine bright AzTEC sources are found towards the extreme peripheral region of the X-ray cluster, whilst the remainder are distributed across the larger scale overdensity. We describe the AzTEC data reduction pipeline, the source-extraction algorithm, and the characterization of the source catalogue, including the completeness, flux deboosting correction, false-detection rate and the source positional uncertainty, through an extensive set of Monte Carlo simulations. We conclude with a preliminary comparison, via a stacked analysis, of the overlapping MIPS 24-μm data and radio data with this AzTEC map of the COSMOS field.

Gaia Data Release 1. Pre-processing and source list creation

NASA Astrophysics Data System (ADS)

Fabricius, C.; Bastian, U.; Portell, J.; Castañeda, J.; Davidson, M.; Hambly, N. C.; Clotet, M.; Biermann, M.; Mora, A.; Busonero, D.; Riva, A.; Brown, A. G. A.; Smart, R.; Lammers, U.; Torra, J.; Drimmel, R.; Gracia, G.; Löffler, W.; Spagna, A.; Lindegren, L.; Klioner, S.; Andrei, A.; Bach, N.; Bramante, L.; Brüsemeister, T.; Busso, G.; Carrasco, J. M.; Gai, M.; Garralda, N.; González-Vidal, J. J.; Guerra, R.; Hauser, M.; Jordan, S.; Jordi, C.; Lenhardt, H.; Mignard, F.; Messineo, R.; Mulone, A.; Serraller, I.; Stampa, U.; Tanga, P.; van Elteren, A.; van Reeven, W.; Voss, H.; Abbas, U.; Allasia, W.; Altmann, M.; Anton, S.; Barache, C.; Becciani, U.; Berthier, J.; Bianchi, L.; Bombrun, A.; Bouquillon, S.; Bourda, G.; Bucciarelli, B.; Butkevich, A.; Buzzi, R.; Cancelliere, R.; Carlucci, T.; Charlot, P.; Collins, R.; Comoretto, G.; Cross, N.; Crosta, M.; de Felice, F.; Fienga, A.; Figueras, F.; Fraile, E.; Geyer, R.; Hernandez, J.; Hobbs, D.; Hofmann, W.; Liao, S.; Licata, E.; Martino, M.; McMillan, P. J.; Michalik, D.; Morbidelli, R.; Parsons, P.; Pecoraro, M.; Ramos-Lerate, M.; Sarasso, M.; Siddiqui, H.; Steele, I.; Steidelmüller, H.; Taris, F.; Vecchiato, A.; Abreu, A.; Anglada, E.; Boudreault, S.; Cropper, M.; Holl, B.; Cheek, N.; Crowley, C.; Fleitas, J. M.; Hutton, A.; Osinde, J.; Rowell, N.; Salguero, E.; Utrilla, E.; Blagorodnova, N.; Soffel, M.; Osorio, J.; Vicente, D.; Cambras, J.; Bernstein, H.-H.

2016-11-01

Context. The first data release from the Gaia mission contains accurate positions and magnitudes for more than a billion sources, and proper motions and parallaxes for the majority of the 2.5 million Hipparcos and Tycho-2 stars. Aims: We describe three essential elements of the initial data treatment leading to this catalogue: the image analysis, the construction of a source list, and the near real-time monitoring of the payload health. We also discuss some weak points that set limitations for the attainable precision at the present stage of the mission. Methods: Image parameters for point sources are derived from one-dimensional scans, using a maximum likelihood method, under the assumption of a line spread function constant in time, and a complete modelling of bias and background. These conditions are, however, not completely fulfilled. The Gaia source list is built starting from a large ground-based catalogue, but even so a significant number of new entries have been added, and a large number have been removed. The autonomous onboard star image detection will pick up many spurious images, especially around bright sources, and such unwanted detections must be identified. Another key step of the source list creation consists in arranging the more than 1010 individual detections in spatially isolated groups that can be analysed individually. Results: Complete software systems have been built for the Gaia initial data treatment, that manage approximately 50 million focal plane transits daily, giving transit times and fluxes for 500 million individual CCD images to the astrometric and photometric processing chains. The software also carries out a successful and detailed daily monitoring of Gaia health.

The dipole anisotropy of AllWISE galaxies

NASA Astrophysics Data System (ADS)

Rameez, M.; Mohayaee, R.; Sarkar, S.; Colin, J.

2018-06-01

We determine the dipole in the WISE (Wide Infrared Satellite Explorer) galaxy catalogue. After reducing star contamination to < 0.1 per cent by rejecting sources with high apparent motion and those close to the Galactic plane, we eliminate low redshift sources to suppress the non-kinematic, clustering dipole. We remove sources within ±5° of the supergalactic plane, as well as those within 1ʺ of 2MRS sources at redshift z < 0.03. We enforce cuts on the source angular extent to preferentially select distant ones. As we progress along these steps, the dipole converges in direction to within 5° of the Cosmic Microwave Background (CMB) dipole and its magnitude also progressively reduces but stabilizes at ˜0.012, corresponding to a velocity >1000 km s-1 if it is solely of kinematic origin. However, previous studies have shown that only ˜ 70 per cent of the velocity of the Local Group as inferred from the CMB dipole is due to sources at z < 0.03. We examine the Dark Sky simulations to quantify the prevalence of such environments and find that <2.1 per cent of Milky Way-like observers in a ΛCDM universe should observe the bulk flow (>240 km s-1 extending to z > 0.03) that we do. We construct mock catalogues in the neighbourhood of such peculiar observers in order to mimic our final galaxy selection and quantify the residual clustering dipole. After subtracting this, the remaining dipole is 0.0048 ± 0.0022, corresponding to a velocity of 420 ± 213 km s-1, which is consistent with the CMB. However, the sources (at z > 0.03) of such a large clustering dipole remain to be identified.

Spectral Index Properties of millijansky Radio Sources in ATLAS

NASA Astrophysics Data System (ADS)

Randall, Kate; Hopkins, A. M.; Norris, R. P.; Zinn, P.; Middelberg, E.; Mao, M. Y.; Sharp, R. G.

2012-01-01

At the faintest radio flux densities (S1.4GHz < 10 milliJansky (mJy)), the spectral index properties of radio sources are not well constrained. The bright radio source population (S1.4GHz > 10 mJy) is well studied and is predominantly comprised of AGN. At fainter flux densities, particularly into the microJansky regime, star-forming galaxies begin to dominate the radio source population. Understanding these faint radio source populations is essential for understanding galaxy evolution, and the link between AGN and star formation. Conflicting results have recently arisen regarding whether there is a flattening of the average spectral index between a low radio frequency (325 or 610 MHz) and 1.4 GHz at these faint flux densities. To explore this issue, we have investigated the spectral index properties of a new catalogue of 843 MHz radio sources in the ELAIS-S1 (the European Large Area ISO Survey - South 1 Region) field. Our results support previous work showing a tendency towards flatter radio spectra at fainter flux densities. This catalogue is cross-matched to the Australia Telescope Large Area Survey (ATLAS), the widest deep radio survey to date at 1.4 GHz, with complementary 2.3 GHz, optical and infrared Spitzer Wide-area Infra-Red Extragalactic data. The variation of spectral index properties have been explored as a function of redshift, luminosity and flux density. [These new measurements have been used to identify a population of faint Compact Steep Spectrum sources, thought to be one of the earliest stages of the AGN life-cycle. Exploring this population will aid us in understanding the evolution of AGN as a whole.

Looking for blazars in a sample of unidentified high-energy emitting Fermi sources

NASA Astrophysics Data System (ADS)

Marchesini, E. J.; Masetti, N.; Chavushyan, V.; Cellone, S. A.; Andruchow, I.; Bassani, L.; Bazzano, A.; Jiménez-Bailón, E.; Landi, R.; Malizia, A.; Palazzi, E.; Patiño-Álvarez, V.; Rodríguez-Castillo, G. A.; Stephen, J. B.; Ubertini, P.

2016-11-01

Context. Based on their overwhelming dominance among associated Fermi γ-ray catalogue sources, it is expected that a large fraction of the unidentified Fermi objects are blazars. Through crossmatching between the positions of unidentified γ-ray sources from the First Fermi Catalog of γ-ray sources emitting above 10 GeV (1FHL) and the ROSAT and Swift/XRT catalogues of X-ray objects and between pointed XRT observations, a sample of 36 potential associations was found in previous works with less than 15 arcsec of positional offset. One-third of them have recently been classified; the remainder, though believed to belong to the blazar class, still lack spectroscopic classifications. Aims: We study the optical spectrum of the putative counterparts of these unidentified gamma-ray sources in order to find their redshifts and to determine their nature and main spectral characteristics. Methods: An observational campaign was carried out on the putative counterparts of 13 1FHL sources using medium-resolution optical spectroscopy from the Osservatorio Astronomico di Bologna in Loiano, Italy; the Telescopio Nazionale Galileo and the Nordic Optical Telescope, both in the Canary Islands, Spain; and the Observatorio Astronómico Nacional San Pedro Mártir in Baja California, Mexico. Results: We were able to classify 14 new objects based on their continuum shapes and spectral features. Conclusions: Twelve new blazars were found, along with one new quasar and one new narrow line Seyfert 1 (NLS1) to be potentially associated with the 1FHL sources of our sample. Redshifts or lower limits were obtained when possible alongside central black hole mass and luminosity estimates for the NLS1 and the quasar.

Quantifying uncertainty in NDSHA estimates due to earthquake catalogue

NASA Astrophysics Data System (ADS)

Magrin, Andrea; Peresan, Antonella; Vaccari, Franco; Panza, Giuliano

2014-05-01

The procedure for the neo-deterministic seismic zoning, NDSHA, is based on the calculation of synthetic seismograms by the modal summation technique. This approach makes use of information about the space distribution of large magnitude earthquakes, which can be defined based on seismic history and seismotectonics, as well as incorporating information from a wide set of geological and geophysical data (e.g., morphostructural features and ongoing deformation processes identified by earth observations). Hence the method does not make use of attenuation models (GMPE), which may be unable to account for the complexity of the product between seismic source tensor and medium Green function and are often poorly constrained by the available observations. NDSHA defines the hazard from the envelope of the values of ground motion parameters determined considering a wide set of scenario earthquakes; accordingly, the simplest outcome of this method is a map where the maximum of a given seismic parameter is associated to each site. In NDSHA uncertainties are not statistically treated as in PSHA, where aleatory uncertainty is traditionally handled with probability density functions (e.g., for magnitude and distance random variables) and epistemic uncertainty is considered by applying logic trees that allow the use of alternative models and alternative parameter values of each model, but the treatment of uncertainties is performed by sensitivity analyses for key modelling parameters. To fix the uncertainty related to a particular input parameter is an important component of the procedure. The input parameters must account for the uncertainty in the prediction of fault radiation and in the use of Green functions for a given medium. A key parameter is the magnitude of sources used in the simulation that is based on catalogue informations, seismogenic zones and seismogenic nodes. Because the largest part of the existing catalogues is based on macroseismic intensity, a rough estimate of ground motion error can therefore be the factor of 2, intrinsic in MCS scale. We tested this hypothesis by the analysis of uncertainty in ground motion maps due to the catalogue random errors in magnitude and localization.

VizieR Online Data Catalog: Arcetri Catalogue of H2O Maser Sources (Brand+ 1994)

NASA Astrophysics Data System (ADS)

Brand, J.; Cesaroni, R.; Caselli, P.; Catarzi, M.; Codella, C.; Comoretto, G.; Curioni, G. P.; Curioni, P.; di, Franco S.; Felli, M.; Giovanardi, C.; Olmi, L.; Palagi, F.; Palla, F.; Panella, D.; Pareschi, G.; Rossi, E.; Speroni, N.; Tofani, G.

1993-11-01

An update is presented of the Arcetri Atlas of water masers (Comoretto et al. 1990A&AS...84..179C). It contains the results of observations of water masers with the Medicina 32-m antenna. The observed sources were all discovered in the period 1989-1993, and were found either directly in the course of our own programs or were taken from the literature in which case they were re-observed at Medicina. We give the observed parameters of 214 sources in tabular form, and present all the spectra of the 141 detections. (2 data files).

Catastrophe risk data scoping for disaster risk finance in Asia

NASA Astrophysics Data System (ADS)

Millinship, Ian; Revilla-Romero, Beatriz

2017-04-01

Developing countries across Latin America, Africa, and Asia are some of the most exposed to natural catastrophes in the world. Over the last 20 years, Asia has borne almost half the estimated global economic cost of natural disasters - around 53billion annually. Losses from natural disasters can damage growth and hamper economic development and unlike in developed countries where risk is reallocated through re/insurance, typically these countries rely on budget reallocations and donor assistance in order to attempt to meet financing needs. There is currently an active international dialogue on the need to increase access to disaster risk financing solutions in Asia. The World Bank-GFDRR Disaster Risk Financing and Insurance Program with financial support from the Rockefeller Foundation, is currently working to develop regional options for disaster risk financing for developing countries in Asia. The first stage of this process has been to evaluate available catastrophe data suitable to support the design and implementation of disaster risk financing mechanisms in selected Asian countries. This project was carried out by a consortium of JBA Risk Management, JBA Consulting, ImageCat and Cat Risk Intelligence. The project focuses on investigating potential data sources for fourteen selected countries in Asia, for flood, tropical cyclone, earthquake and drought perils. The project was carried out under four stages. The first phase focused to identify and catalogue live/dynamic hazard data sources such as hazard gauging networks, or earth observations datasets which could be used to inform a parametric trigger. Live data sources were identified that provide credibility, transparency, independence, frequent reporting, consistency and stability. Data were catalogued at regional level, and prioritised at local level for five countries: Bangladesh, Indonesia, Pakistan, Sri Lanka and Viet Nam. The second phase was to identify, catalogue and evaluate catastrophe risk models that could quantify risk and provide a view of risk to support design and pricing of parametric disaster risk financing mechanisms. The third stage was to evaluate the usability of data sources and catastrophe models, and to develop index prototypes to outline how data and catastrophe models could be combined using local, regional and global data sources. Finally, the project identified priorities for investment to support the collection, analysis and evaluation of natural catastrophes in order to support disaster risk financing.

Extending the ISC-GEM Global Earthquake Instrumental Catalogue

NASA Astrophysics Data System (ADS)

Di Giacomo, Domenico; Engdhal, Bob; Storchak, Dmitry; Villaseñor, Antonio; Harris, James

2015-04-01

After a 27-month project funded by the GEM Foundation (www.globalquakemodel.org), in January 2013 we released the ISC-GEM Global Instrumental Earthquake Catalogue (1900 2009) (www.isc.ac.uk/iscgem/index.php) as a special product to use for seismic hazard studies. The new catalogue was necessary as improved seismic hazard studies necessitate that earthquake catalogues are homogeneous (to the largest extent possible) over time in their fundamental parameters, such as location and magnitude. Due to time and resource limitation, the ISC-GEM catalogue (1900-2009) included earthquakes selected according to the following time-variable cut-off magnitudes: Ms=7.5 for earthquakes occurring before 1918; Ms=6.25 between 1918 and 1963; and Ms=5.5 from 1964 onwards. Because of the importance of having a reliable seismic input for seismic hazard studies, funding from GEM and two commercial companies in the US and UK allowed us to start working on the extension of the ISC-GEM catalogue both for earthquakes that occurred beyond 2009 and for earthquakes listed in the International Seismological Summary (ISS) which fell below the cut-off magnitude of 6.25. This extension is part of a four-year program that aims at including in the ISC-GEM catalogue large global earthquakes that occurred before the beginning of the ISC Bulletin in 1964. In this contribution we present the updated ISC GEM catalogue, which will include over 1000 more earthquakes that occurred in 2010 2011 and several hundreds more between 1950 and 1959. The catalogue extension between 1935 and 1949 is currently underway. The extension of the ISC-GEM catalogue will also be helpful for regional cross border seismic hazard studies as the ISC-GEM catalogue should be used as basis for cross-checking the consistency in location and magnitude of those earthquakes listed both in the ISC GEM global catalogue and regional catalogues.

Web-Resources for Astronomical Data in the Ultraviolet

NASA Astrophysics Data System (ADS)

Sachkov, M. E.; Malkov, O. Yu.

2017-12-01

In this paper we describe databases of space projects that are operating or have operated in the ultraviolet spectral region. We give brief descriptions and links to major sources for UV data on the web: archives, space mission sites, databases, catalogues. We pay special attention to the World Space Observatory—Ultraviolet mission that will be launched in 2021.

Catalogue of Workforce Information Sources: Decision Making Assistance for Regional Economic Development. U.S. Department of Labor, Employment and Training Administration

ERIC Educational Resources Information Center

US Department of Labor, 2009

2009-01-01

In early 2006, The U.S. Department of Labor (DOL), Employment and Training Administration (ETA) began an initiative called Workforce Innovation in Regional Economic Development (WIRED) to help regions create competitive conditions, integrate economic and workforce development activities, and demonstrate that talent development can successfully…

Model documentation: Electricity Market Module, Electricity Fuel Dispatch Submodule

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report documents the objectives, analytical approach and development of the National Energy Modeling System Electricity Fuel Dispatch Submodule (EFD), a submodule of the Electricity Market Module (EMM). The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components.

Artificial Intelligence Based Selection of Optimal Cutting Tool and Process Parameters for Effective Turning and Milling Operations

NASA Astrophysics Data System (ADS)

Saranya, Kunaparaju; John Rozario Jegaraj, J.; Ramesh Kumar, Katta; Venkateshwara Rao, Ghanta

2016-06-01

With the increased trend in automation of modern manufacturing industry, the human intervention in routine, repetitive and data specific activities of manufacturing is greatly reduced. In this paper, an attempt has been made to reduce the human intervention in selection of optimal cutting tool and process parameters for metal cutting applications, using Artificial Intelligence techniques. Generally, the selection of appropriate cutting tool and parameters in metal cutting is carried out by experienced technician/cutting tool expert based on his knowledge base or extensive search from huge cutting tool database. The present proposed approach replaces the existing practice of physical search for tools from the databooks/tool catalogues with intelligent knowledge-based selection system. This system employs artificial intelligence based techniques such as artificial neural networks, fuzzy logic and genetic algorithm for decision making and optimization. This intelligence based optimal tool selection strategy is developed using Mathworks Matlab Version 7.11.0 and implemented. The cutting tool database was obtained from the tool catalogues of different tool manufacturers. This paper discusses in detail, the methodology and strategies employed for selection of appropriate cutting tool and optimization of process parameters based on multi-objective optimization criteria considering material removal rate, tool life and tool cost.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moghissi, A.A.; Blauvelt, R.K.; Benda, G.A.

This volume contains the peer-reviewed and edited versions of papers submitted for presentation a the Second International Mixed Waste Symposium. Following the tradition of the First International Mixed Waste Symposium, these proceedings were prepared in advance of the meeting for distribution to participants. The symposium was organized by the Mixed Waste Committee of the American Society of Mechanical Engineers. The topics discussed at the symposium include: stabilization technologies, alternative treatment technologies, regulatory issues, vitrification technologies, characterization of wastes, thermal technologies, laboratory and analytical issues, waste storage and disposal, organic treatment technologies, waste minimization, packaging and transportation, treatment of mercury contaminatedmore » wastes and bioprocessing, and environmental restoration. Individual abstracts are catalogued separately for the data base.« less

Investigation of the FK5 system in the equatorial zone. Application to the instrumental system of the Second Quito astrolabe catalogue.

NASA Astrophysics Data System (ADS)

Kolesnik, Y. B.

1995-12-01

15 catalogues produced in the 1980s and 12 catalogues made from 1960 to 1978 have been used to assess the consistency of the FK5 system with observations in the declination zone from -30deg to 30deg. Classical δ-dependent and α-dependent systematic differences (Cat-FK5) have been formed for individual instrumental systems of the catalogues. The weighted mean instrumental systems for two subsets of catalogues centred at the epochs 1970 and 1987 have been constructed. External systematic and random accuracy of the catalogues under analysis and errors of the mean instrumental systems for both selections of catalogues have been estimated and presented in tables. The individual systematic differences of the catalogues and the mean instrumental systems are shown in figures. Numerical values of the total systematic deviations for both mean instrumental systems are given in tables. The results of intercomparison are discussed to assess the actual systematic deviations of the FK5 at the respective epochs and its actual random accuracy. It has been found that the mutual consistency of individual instrumental systems of catalogues of 1980s with respect to zonal systematic differences in both right ascension and declination is significantly better when comparing with the earlier catalogues. Consistency of both catalogue subsets is comparable with respect to α-dependent systematic differences. It is shown that the claimed random errors of the FK5 positions and proper motions are rather realistic, while deviations of the FK5 right ascension and declination system in the equatorial zone for both mean epochs exceed expected ones from the formal considerations. Quick degradation of the FK5 system with time is detected in right ascension. The results in declination are recognized to be less reliable, due to larger inconsistency of the individual instrumental systems. The system of the Second Quito Astrolabe Catalogue (QAC 2) has been investigated by comparison with two subsets of catalogues. It shows rather good consistency with both mean instrumental systems. Some conspicuous local deviations are outlined and discussed. We conclude that the QAC 2 might successfully be used in the compilation of the future second general catalogue of astrolabes as a link between northern and southern astrolabe catalogues.

32 CFR 575.6 - Catalogue, United States Military Academy.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 3 2013-07-01 2013-07-01 false Catalogue, United States Military Academy. 575.6... ADMISSION TO THE UNITED STATES MILITARY ACADEMY § 575.6 Catalogue, United States Military Academy. The latest edition of the catalogue, United States Military Academy, contains additional information...

32 CFR 575.6 - Catalogue, United States Military Academy.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 3 2011-07-01 2009-07-01 true Catalogue, United States Military Academy. 575.6... ADMISSION TO THE UNITED STATES MILITARY ACADEMY § 575.6 Catalogue, United States Military Academy. The latest edition of the catalogue, United States Military Academy, contains additional information...

32 CFR 575.6 - Catalogue, United States Military Academy.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 3 2010-07-01 2010-07-01 true Catalogue, United States Military Academy. 575.6... ADMISSION TO THE UNITED STATES MILITARY ACADEMY § 575.6 Catalogue, United States Military Academy. The latest edition of the catalogue, United States Military Academy, contains additional information...

32 GHz Celestial Reference Frame Survey for Dec < -45 deg.

NASA Astrophysics Data System (ADS)

Horiuchi, Shinji; Phillips, Chris; Stevens, Jamie; Jacobs, Christopher; Sotuela, Ioana; Garcia miro, Cristina

2013-04-01

(We resubmit this proposal to extend from the previous semester. The 24 hour blocks for ATCA and Mopra were granted in May 2012 but canceled because fringe test before the scheduled experiment failed although fringes were detected between Mopra and Tidbinbilla. As it turned out ATCA had an issue with frequency standard, which has now been resolved.) We propose to conduct a LBA survey of compact radio sources at 32 GHz near the south pole region. This is the first attempt to fill the gap in the existing 32 GHz catalogue establish by NASA Deep Space Network toward completing the full sky celestial reference frame at 32 GHz. The catalogue will be used for future spacecraft navigation by NASA and other space agencies as well as for radio astronomical observations with southern radio telescope arrays such as ATCA and LBA.

Accessing space: A catalogue of process, equipment and resources for commercial users

NASA Technical Reports Server (NTRS)

1988-01-01

This catalogue, produced by NASA's Office of Commercial Programs, provides a broad source of information for the commercial developer interested in the areas of microgravity research and remote sensing. Methods for accessing space for research are reviewed including the shuttle, expendable launch vehicles, suborbital sounding rockets, experimental aircraft, and drop towers and other ground-based facilities. Procedures for using these vehicles and facilities are described along with funding options to pay for their use. Experiment apparatus and carriers for microgravity research are also described. A separate directory of resources and services is also included which contains a listing of transportation products and services, a listing of businesses and industries which provide space-related services and products, and a listing of the NASA and CCDS (Center for the Commercial Development of Space) points of contact.

Exploring ESASky

NASA Astrophysics Data System (ADS)

De Marchi, Guido; ESASky Team

2017-06-01

ESASky is a science-driven discovery portal for all ESA space astronomy missions. It also includes missions from international partners such as Suzaku and Chandra. The first public release of ESASky features interfaces for sky exploration and for single and multiple target searches. Using the application requires no prior-knowledge of any of the missions involved and gives users world-wide simplified access to high-level science-ready data products from space-based Astronomy missions, plus a number of ESA-produced source catalogues, including the Gaia Data Release 1 catalogue. We highlight here the latest features to be developed, including one that allows the user to project onto the sky the footprints of the JWST instruments, at any chosen position and orientation. This tool has been developed to aid JWST astronomers when they are defining observing proposals. We aim to include other missions and instruments in the near future.

Probabilistic Seismic Hazard Assessment of the Chiapas State (SE Mexico)

NASA Astrophysics Data System (ADS)

Rodríguez-Lomelí, Anabel Georgina; García-Mayordomo, Julián

2015-04-01

The Chiapas State, in southeastern Mexico, is a very active seismic region due to the interaction of three tectonic plates: Northamerica, Cocos and Caribe. We present a probabilistic seismic hazard assessment (PSHA) specifically performed to evaluate seismic hazard in the Chiapas state. The PSHA was based on a composited seismic catalogue homogenized to Mw and was used a logic tree procedure for the consideration of different seismogenic source models and ground motion prediction equations (GMPEs). The results were obtained in terms of peak ground acceleration as well as spectral accelerations. The earthquake catalogue was compiled from the International Seismological Center and the Servicio Sismológico Nacional de México sources. Two different seismogenic source zones (SSZ) models were devised based on a revision of the tectonics of the region and the available geomorphological and geological maps. The SSZ were finally defined by the analysis of geophysical data, resulting two main different SSZ models. The Gutenberg-Richter parameters for each SSZ were calculated from the declustered and homogenized catalogue, while the maximum expected earthquake was assessed from both the catalogue and geological criteria. Several worldwide and regional GMPEs for subduction and crustal zones were revised. For each SSZ model we considered four possible combinations of GMPEs. Finally, hazard was calculated in terms of PGA and SA for 500-, 1000-, and 2500-years return periods for each branch of the logic tree using the CRISIS2007 software. The final hazard maps represent the mean values obtained from the two seismogenic and four attenuation models considered in the logic tree. For the three return periods analyzed, the maps locate the most hazardous areas in the Chiapas Central Pacific Zone, the Pacific Coastal Plain and in the Motagua and Polochic Fault Zone; intermediate hazard values in the Chiapas Batholith Zone and in the Strike-Slip Faults Province. The hazard decreases towards the northeast across the Reverse Faults Province and up to Yucatan Platform, where the lowest values are reached. We also produced uniform hazard spectra (UHS) for the three main cities of Chiapas. Tapachula city presents the highest spectral accelerations, while Tuxtla Gutierrez and San Cristobal de las Casas cities show similar values. We conclude that seismic hazard in Chiapas is chiefly controlled by the subduction of the Cocos beneath Northamerica and Caribe tectonic plates, that makes the coastal areas the most hazardous. Additionally, the Motagua and Polochic Fault Zones are also important, increasing the hazard particularly in southeastern Chiapas.

A new version of a computer program for dynamical calculations of RHEED intensity oscillations

NASA Astrophysics Data System (ADS)

Daniluk, Andrzej; Skrobas, Kazimierz

2006-01-01

We present a new version of the RHEED program which contains a graphical user interface enabling the use of the program in the graphical environment. The presented program also contains a graphical component which enables displaying program data at run-time through an easy-to-use graphical interface. New version program summaryTitle of program: RHEEDGr Catalogue identifier: ADWV Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADWV Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Catalogue identifier of previous version: ADUY Authors of the original program: A. Daniluk Does the new version supersede the original program: no Computer for which the new version is designed and others on which it has been tested: Pentium-based PC Operating systems or monitors under which the new version has been tested: Windows 9x, XP, NT Programming language used: Borland C++ Builder Memory required to execute with typical data: more than 1 MB Number of bits in a word: 64 bits Number of processors used: 1 Number of lines in distributed program, including test data, etc.: 5797 Number of bytes in distributed program, including test data, etc.: 588 121 Distribution format: tar.gz Nature of physical problem: Reflection high-energy electron diffraction (RHEED) is a very useful technique for studying growth and surface analysis of thin epitaxial structures prepared by the molecular beam epitaxy (MBE). The RHEED technique can reveal, almost instantaneously, changes either in the coverage of the sample surface by adsorbates or in the surface structure of a thin film. Method of solution: RHEED intensities are calculated within the framework of the general matrix formulation of Peng and Whelan [1] under the one-beam condition. Reasons for the new version: Responding to the user feedback we designed a graphical package that enables displaying program data at run-time through an easy-to-use graphical interface. Summary of revisions:In the present form the code is an object-oriented extension of previous version [2]. Fig. 1 shows the static structure of classes and their possible relationships (i.e. inheritance, association, aggregation and dependency) in the code. The code has been modified and optimized to compile under the C++ Builder integrated development environment (IDE). A graphical user interface (GUI) for the program has been created. The application is a standard multiple document interface (MDI) project from Builder's object repository. The MDI application spawns child window that reside within the client window; the main form contains child object. We have added an original graphical component [3] which has been tested successfully in the C++ Builder programming environment under Microsoft Windows platform. Fig. 2 shows internal structure of the component. This diagram is a graphic presentation of the static view which shows a collection of declarative model elements, such as classes, types, and their relationships. Each of the model elements shown in Fig. 2 is manifested by one header file Graph2D.h, and one code file Graph2D.cpp. Fig. 3 sets the stage by showing the package which supplies the C++ Builder elements used in the component. Installation instructions of the TGraph2D.bpk package can be found in the new distribution. The program has been constructed according to the systems development live cycle (SDLC) methodology [4]. Typical running time: The typical running time is machine and user-parameters dependent. Unusual features of the program: The program is distributed in the form of a main project RHEEDGr.bpr with associated files, and should be compiled using Borland C++ Builder compilers version 5 or later.

Cyber-Physical Security Assessment (CyPSA) Toolset

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garcia, Luis; Patapanchala, Panini; Zonouz, Saman

CyPSA seeks to organize and gain insight into the diverse sets of data that a critical infrastructure provider must manage. Specifically CyPSA inventories, manages, and analyzes assets and relations among those assets. A variety of interfaces are provided. CyPSA inventories assets (both cyber and physical). This may include the cataloging of assets through a common interface. Data sources used to generate a catalogue of assets include PowerWorld, NPView, NMap Scans, and device configurations. Depending upon the role of the person using the tool the types of assets accessed as well as the data sources through which asset information is accessedmore » may vary. CyPSA allows practitioners to catalogue relations among assets and these may either be manually or programmatically generated. For example, some common relations among assets include the following: Topological Network Data: Which devices and assets are connected and how? Data sources for this kind of information include NMap scans, NPView topologies (via Firewall rule analysis). Security Metrics Outputs: The output of various security metrics such as overall exposure. Configure Assets:CyPSA may eventually include the ability to configure assets including relays and switches. For example, a system administrator would be able to configure and alter the state of a relay via the CyPSA interface. Annotate Assets: CyPSA also allows practitioners to manually and programmatically annotate assets. Sources of information with which to annotate assets include provenance metadata regarding the data source from which the asset was loaded, vulnerability information from vulnerability databases, configuration information, and the output of an analysis in general.« less

Users and Union Catalogues

ERIC Educational Resources Information Center

Hartley, R. J.; Booth, Helen

2006-01-01

Union catalogues have had an important place in libraries for many years. Their use has been little investigated. Recent interest in the relative merits of physical and virtual union catalogues and a recent collaborative project between a physical and several virtual union catalogues in the United Kingdom led to the opportunity to study how users…

Reduction of EAO Positional Observations Database

NASA Astrophysics Data System (ADS)

Nefedyev, Yuri; Andreev, Alexey; Demina, Natalya; Churkin, Konstantin

2016-07-01

There is a large data bank of positional observations of Solar System bodies at Engelhadt Astronomical Observatory (EAO). The positional observations include the major planets, except Jupiter. Modern technologies replace classical methods of observations in astronomy and in astrometry as well. At the same time many positional observations have been gathered at astronomical observatories. So taking into account that observations of the past epochs have presenteda great value for astronomy and as times goes by their importance is growing it is obvious that positional astrometry will not lose its practical importance. This was noted in B3 XXIV IAU resolution by the General Assembly. The results of reduction of solar system bodies observations were published mainly in Proceeding of EAO and Transactions of Kazan City Astronomical Observatory. Earlier there have been made about three thousand observations at EAO and Zelenchuk station with the Zeiss telescope (D=400mm, f=2000mm), AFR-18 (photo visual, D=200, f=2000), refractor (D=400mm, f=3450mm), Meniscus camera (D=340mm, f=1200mm), Schmidt camera (D=350mm, f=2000mm). The major planets except Pluto and Neptune were observed with a special cassette chamber equipped with a rotating disk which had an open sector to reduce the brightness of the planets. The dimension of the sector was chosen accordingto the brightness of the planets. The disk was placed in the centre of the astrograph's field. The stars' true brightness was preserved. A large number of catalogues were compiled by the end of the 20th century. We used Tycho-2 catalogue for reducing our observations. As it is known the catalogue Tycho-2 (Tycho-2 catalogue, 2000) includes 2539913 stars. The stars' proper motions given in the catalogue were obtained by comparing positions from Tycho-2 with positions from the Astrographic Catalogue. Therefore they are considered to be highly accurate. The accuracy of stellar positions in Tycho-2 is about 60 mas and the accuracy of their proper motions is 2.5 mas/yr. The mean (O-C) values for Pluto were calculated for observations taken between 1985 and 1991. However, if we look at the period of 1988-1991 in detail, the values of (O-C)_{α} for Pluto with the Tycho-2 catalogue increase from 1,32" to 2,25". The values of (O-C)_{δ} are in the limits of -0,41" to -0,57". The large (O - C) values for Pluto in both coordinates can be explained by the uncertainties of its ephemeredes and probably by the oscillations of the photometric centre of the Pluto-Charon system. Similar results had been obtained earlier at EAO and Pulkovo observatory. The values of (O - C) for the other planets are within the accuracy of the positional method of observation. Positions of Venus, Mars, Saturn, Uranus, Neptune and Pluto in the system of the Tycho-2 catalogue were obtained. The coordinates of the planets are apparent exceptfor Pluto. In addition the work has been compared by the accuracy with the results obtained with using catalogues PPM and Tycho-2. The accuracy of the reduction of EAO planet observations based on the Tycho-2 catalogue is higher than that of the reduction with the PPM catalogues especially in right ascension. That is not surprising, since both the systematical and random errors are smaller in the Tycho-2 catalogue. We consider this demonstrates that rereduction of positional observations with improved catalogues can significantly improve the accuracy, and therefore the value, of old, and in the case of planets - unrepeatable, observations. At the present time at EAO there is a glass library which contains a large archive of photographic plates, covering the period of more than 90 years, and obtained by different telescopes:1) A photographic survey of the sky (FON) 30X30 - 1746 plates;2) Photographic catalogue (size 30X30) - 700 plates;3) The Moon with Stars - 612 plates;4) Positive images - 272 plates;5) Comets, asteroids, moons - 159 plates;Schmidt Telescope:6) Selected Areas of Kapteyn - 1500 plates;7) Comets and asteroids - 950 plates;8) Radio sources - 253 plates;9) Variable Stars - 350 plates;10) New and supernovae - 300 plates;11) Random objects - 250 plates;Meniscus telescope :12) Selected Areas of Kapteyn - 1070 (2130) plates.Total: 10292 plates. Today we are converting the astronomical plates into digital form. In order to get an acceptable size of final data (tens of MB) without loss of astronomical data some compression methods with resolution up to 20 microns will be used. Work was supported by grants RFBR 15-02-01638-a, 16-32-60071-mol-dk-a and 16-02-00496-a.

XTALOPT version r11: An open-source evolutionary algorithm for crystal structure prediction

NASA Astrophysics Data System (ADS)

Avery, Patrick; Falls, Zackary; Zurek, Eva

2018-01-01

Version 11 of XTALOPT, an evolutionary algorithm for crystal structure prediction, has now been made available for download from the CPC library or the XTALOPT website, http://xtalopt.github.io. Whereas the previous versions of XTALOPT were published under the Gnu Public License (GPL), the current version is made available under the 3-Clause BSD License, which is an open source license that is recognized by the Open Source Initiative. Importantly, the new version can be executed via a command line interface (i.e., it does not require the use of a Graphical User Interface). Moreover, the new version is written as a stand-alone program, rather than an extension to AVOGADRO.

MCNP output data analysis with ROOT (MODAR)

NASA Astrophysics Data System (ADS)

Carasco, C.

2010-12-01

MCNP Output Data Analysis with ROOT (MODAR) is a tool based on CERN's ROOT software. MODAR has been designed to handle time-energy data issued by MCNP simulations of neutron inspection devices using the associated particle technique. MODAR exploits ROOT's Graphical User Interface and functionalities to visualize and process MCNP simulation results in a fast and user-friendly way. MODAR allows to take into account the detection system time resolution (which is not possible with MCNP) as well as detectors energy response function and counting statistics in a straightforward way. New version program summaryProgram title: MODAR Catalogue identifier: AEGA_v1_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEGA_v1_1.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 150 927 No. of bytes in distributed program, including test data, etc.: 4 981 633 Distribution format: tar.gz Programming language: C++ Computer: Most Unix workstations and PCs Operating system: Most Unix systems, Linux and windows, provided the ROOT package has been installed. Examples where tested under Suse Linux and Windows XP. RAM: Depends on the size of the MCNP output file. The example presented in the article, which involves three two dimensional 139×740 bins histograms, allocates about 60 MB. These data are running under ROOT and include consumption by ROOT itself. Classification: 17.6 Catalogue identifier of previous version: AEGA_v1_0 Journal reference of previous version: Comput. Phys. Comm. 181 (2010) 1161 External routines: ROOT version 5.24.00 ( http://root.cern.ch/drupal/) Does the new version supersede the previous version?: Yes Nature of problem: The output of a MCNP simulation is an ascii file. The data processing is usually performed by copying and pasting the relevant parts of the ascii file into Microsoft Excel. Such an approach is satisfactory when the quantity of data is small but is not efficient when the size of the simulated data is large, for example when time-energy correlations are studied in detail such as in problems involving the associated particle technique. In addition, since the finite time resolution of the simulated detector cannot be modeled with MCNP, systems in which time-energy correlation is crucial cannot be described in a satisfactory way. Finally, realistic particle energy deposit in detectors is calculated with MCNP in a two step process involving type-5 then type-8 tallies. In the first step, the photon flux energy spectrum associated to a time region is selected and serves as a source energy distribution for the second step. Thus, several files must be manipulated before getting the result, which can be time consuming if one needs to study several time regions or different detectors performances. In the same way, modeling counting statistics obtained in a limited acquisition time requires several steps and can also be time consuming. Solution method: In order to overcome the previous limitations, the MODAR C++ code has been written to make use of CERN's ROOT data analysis software. MCNP output data are read from the MCNP output file with dedicated routines. Two dimensional histograms are filled and can be handled efficiently within the ROOT framework. To keep a user friendly analysis tool, all processing and data display can be done by means of ROOT Graphical User Interface. Specific routines have been written to include detectors finite time resolution and energy response function as well as counting statistics in a straightforward way. Reasons for new version: For applications involving the Associate Particle Technique, a large number of gamma rays are produced by the fast neutrons interactions. To study the energy spectra, it is useful to identify the gamma-ray energy peaks in a straightforward way. Therefore, the possibility to show gamma rays corresponding to specific reactions has been added in MODAR. Summary of revisions: It is possible to use a gamma ray database to better identify in the energy spectra gamma ray peaks with their first and second escapes. Histograms can be scaled by the number of source particle to evaluate the number of counts that is expected without statistical uncertainties. Additional comments: The possibility of adding tallies has also been incorporated in MODAR in order to describe systems in which the signal from several detectors can be summed. Moreover, MODAR can be adapted to handle other problems involving two dimensional data. Running time: The CPU time needed to smear a two dimensional histogram depends on the size of the histogram. In the presented example, the time-energy smearing of one of the 139×740 two dimensional histograms takes 3 minutes with a DELL computer equipped with INTEL Core 2.

Merge of Five Previous Catalogues Into the Ground Truth Catalogue and Registration Based on MOLA Data with THEMIS-DIR, MDIM and MOC Data-Sets

NASA Astrophysics Data System (ADS)

Salamuniccar, G.; Loncaric, S.

2008-03-01

The Catalogue from our previous work was merged with the date of Barlow, Rodionova, Boyce, and Kuzmin. The resulting ground truth catalogue with 57,633 craters was registered, using MOLA data, with THEMIS-DIR, MDIM, and MOC data-sets.

NIED seismic moment tensor catalogue for regional earthquakes around Japan: quality test and application

NASA Astrophysics Data System (ADS)

Kubo, Atsuki; Fukuyama, Eiichi; Kawai, Hiroyuki; Nonomura, Ken'ichi

2002-10-01

We have examined the quality of the National Research Institute for Earth Science and Disaster Prevention (NIED) seismic moment tensor (MT) catalogue obtained using a regional broadband seismic network (FREESIA). First, we examined using synthetic waveforms the robustness of the solutions with regard to data noise as well as to errors in the velocity structure and focal location. Then, to estimate the reliability, robustness and validity of the catalogue, we compared it with the Harvard centroid moment tensor (CMT) catalogue as well as the Japan Meteorological Agency (JMA) focal mechanism catalogue. We found out that the NIED catalogue is consistent with Harvard and JMA catalogues within the uncertainty of 0.1 in moment magnitude, 10 km in depth, and 15° in direction of the stress axes. The NIED MT catalogue succeeded in reducing to 3.5 the lower limit of moment magnitude above which the moment tensor could be reliably estimated. Finally, we estimated the stress tensors in several different regions by using the NIED MT catalogue. This enables us to elucidate the stress/deformation field in and around the Japanese islands to understand the mode of deformation and applied stress. Moreover, we identified a region of abnormal stress in a swarm area from stress tensor estimates.

VizieR Online Data Catalog: Yale Trigonometric Parallaxes Preliminary (van Altena+ 1991)

NASA Astrophysics Data System (ADS)

van Altena, W. F.; Lee, J. T.; Hoffleit, D.

1995-10-01

The preliminary edition of the General Catalogue of Trigonometric Stellar Parallaxes, containing 15349 parallaxes for 7879 stars, has been prepared at the Yale University Observatory. In this edition 1480 stars have been added to those contained in the previous edition of the catalog by Jenkins (1952, 1963). This relatively small increase in the number of stars is more than compensated for by the increased accuracy of the newer trigonometric parallaxes. The authors have attempted to include here all trigonometric parallaxes made available to them by March 1991 and will provide for each listed parallax in the final version the reference to its source of publication. For each star it lists the equatorial coordinates for B1900 and the secular variation for 100 years, the proper motion in x and y, the weighted average absolute parallax and its standard error, the number of parallax observations, the quality of interagreement among the different values, the visual magnitude, and various cross identifications with other catalogs. The B1900 equinox has been maintained to avoid assigning yet another star number. Ancillary information, including UBV photometry, MK spectral types, data on the variability and binary nature of the stars, orbits when available, and miscellaneous information to aid in determining the reliability of the data, will be listed in the final version. The relative parallaxes are corrected to absolute parallax using newly computed corrections that are based on an improved model of the galaxy. An analysis of the resulting absolute parallaxes has been made to study the accidental and systematic errors of the parallaxes. The results of that investigation are used to arrive at a weighting system for the catalog, which then yields weighted absolute parallaxes for each star. The weighting system is still under investigation; therefore, the weighted parallaxes may change a bit in the final version. Printed copies of the catalog will be available from the Yale University Observatory when the work has been completed (late 1993?). See the file cdrom.doc which provides the original documentation by W. van Altena. (1 data file).

The integrated Sachs-Wolfe signal from BOSS superstructures

NASA Astrophysics Data System (ADS)

Granett, B. R.; Kovács, A.; Hawken, A. J.

2015-12-01

Cosmic structures leave an imprint on the microwave background radiation through the integrated Sachs-Wolfe (ISW) effect. We construct a template map of the linear signal using the Sloan Digital Sky Survey-III Baryon Acoustic Oscillation Survey at redshift 0.43 < z < 0.65. We verify the imprint of this map on the Planck cosmic microwave background (CMB) temperature map at the 97 per cent confidence level and show consistency with the density-temperature cross-correlation measurement. Using this ISW reconstruction as a template, we investigate the presence of ISW sources and further examine the properties of the Granett-Neyrinck-Szapudi supervoid and supercluster catalogue. We characterize the three-dimensional density profiles of these structures for the first time and demonstrate that they are significant structures. Model fits demonstrate that the supervoids are elongated along the line of sight and we suggest that this special orientation may be picked out by the void-finding algorithm in photometric redshift space. We measure the mean temperature profiles in Planck maps from public void and cluster catalogues. In an attempt to maximize the stacked ISW signal, we construct a new catalogue of superstructures based upon local peaks and troughs of the gravitational potential. However, we do not find a significant correlation between these structures and the CMB temperature.

World data centre for microorganisms: an information infrastructure to explore and utilize preserved microbial strains worldwide

PubMed Central

Wu, Linhuan; Sun, Qinglan; Desmeth, Philippe; Sugawara, Hideaki; Xu, Zhenghong; McCluskey, Kevin; Smith, David; Alexander, Vasilenko; Lima, Nelson; Ohkuma, Moriya; Robert, Vincent; Zhou, Yuguang; Li, Jianhui; Fan, Guomei; Ingsriswang, Supawadee; Ozerskaya, Svetlana; Ma, Juncai

2017-01-01

The World Data Centre for Microorganisms (WDCM) was established 50 years ago as the data center of the World Federation for Culture Collections (WFCC)—Microbial Resource Center (MIRCEN). WDCM aims to provide integrated information services using big data technology for microbial resource centers and microbiologists all over the world. Here, we provide an overview of WDCM including all of its integrated services. Culture Collections Information Worldwide (CCINFO) provides metadata information on 708 culture collections from 72 countries and regions. Global Catalogue of Microorganism (GCM) gathers strain catalogue information and provides a data retrieval, analysis, and visualization system of microbial resources. Currently, GCM includes >368 000 strains from 103 culture collections in 43 countries and regions. Analyzer of Bioresource Citation (ABC) is a data mining tool extracting strain related publications, patents, nucleotide sequences and genome information from public data sources to form a knowledge base. Reference Strain Catalogue (RSC) maintains a database of strains listed in International Standards Organization (ISO) and other international or regional standards. RSC allocates a unique identifier to strains recommended for use in diagnosis and quality control, and hence serves as a valuable cross-platform reference. WDCM provides free access to all these services at www.wdcm.org. PMID:28053166

VizieR Online Data Catalog: New standards in 18th century astrometry (Lequeux, 2014)

NASA Astrophysics Data System (ADS)

Lequeux, J.

2014-05-01

Catalogue of Flamsteed (flamstee.dat): John Flamsteed (1646-1719) was the first astronomer in charge of Greenwich Observatory. His stellar catalogue (Flamsteed 1725) was built on observations from 1675 to 1683 with a 6-feet radius sextant mounted on an axis parallel to the polar axis of the Earth, then from 1683 to 1719 with a mural circle with a radius of 79.5 inches (2m). 220 stars over 3925. Catalogue of Romer (romer.dat): Ole (or Olaus) Romer (1644-1710) is principally known for his 1676 discovery of the finite velocity of light, a discovery that he shared with Jean-Dominique Cassini. After a long stay in Paris, he returned to Copenhagen in 1681 and was appointed professor of astronomy at the University. The observatory and all the observations were destroyed in the great Copenhagen fire of 1728, with the exception of observations of 88 stars obtained during three observing nights, from 20 to 23 October 1706. La Caille's catalogue of fundamental stars (lacaifun.dat): Nicolas-Louis La Caille (or Lacaille, or de la Caille, 1713-1762) was a French astronomer who is remembered principally for his survey of the southern sky, where he introduced 14 new constellations that are still in use today. Before leaving for the Cape of Good Hope in 1750, he started a catalogue of the 400 brightest stars of both hemispheres, which he completed during his stays in Cape Town and in the Mauritius island, then after his return to Paris in 1754. He reduced the observations himself, including for the first time corrections for aberration and nutation, and published them with details of the observations and reductions (La Caille 1757). Bailly's adaptation of La Caille's catalogue of fundamental stars (bailly.dat): After the death of La Caille, Jean-Sylvain Bailly published a catalogue of the brighest stars of both hemispheres for the equinox B1750.0 in Ephemerides for 10 year from 1765 to 1775 (Anonymous (Bailly) 1763, p. lvii-lxiv). This catalogue obviously derives from the catalogue named lacaillefund.dat. La Caille's complete survey of the southern sky (lacaisur.dat): During his stay in Cape Town in 1751-1752, La Caille made the first systematic survey of the sky ever, in the modern sense. 244 stars over 9766. La Caille's catalogue of zodiacal stars (lacaizod.dat): When La Caille returned from his southern expedition in 1754, he undertook the construction of a catalogue of zodiacal stars. Mayer's zodiacal catalogue (mayer.dat): At exactly the same time as La Caille, Tobias Mayer (1723-1762) in Gottingen undertook a similar catalogue of zodiacal stars, using a 6-feet radius mural quadrant made by John Bird (1709-1776). 200 stars over 998. Bradley's stellar catalogue (bradley.dat): James Bradley (1693-1762) is famous for his discovery of aberration and nutation. From 1750 to his death in 1762, he built a large stellar catalogue, from observations first with an old mural sector and after 1753 with the Bird 8-ft mural sector located in Greenwich, where it 215 stars over 3220. Piazzi's stellar catalogue (piazzi.dat): Giuseppe Piazzi (1746-1846) built a large catalogue containing 7646 stars from 1792 to 1813, observed in Palermo with an altazimuthal circle of Jesse Ramsden (1735-1800) can still be seen. 202 stars over 7646. Lalande's stellar catalogue (lalande.dat): L'Histoire celeste francaise de Lalande (Lalande 1801), which contains the unreduced observations of approximately 40,000 stars, is the first very large stellar catalogue. 198 stars over ~45000. (10 data files).

GRASP92: a package for large-scale relativistic atomic structure calculations

NASA Astrophysics Data System (ADS)

Parpia, F. A.; Froese Fischer, C.; Grant, I. P.

2006-12-01

Program summaryTitle of program: GRASP92 Catalogue identifier: ADCU_v1_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADCU_v1_1 Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Licensing provisions: no Programming language used: Fortran Computer: IBM POWERstation 320H Operating system: IBM AIX 3.2.5+ RAM: 64M words No. of lines in distributed program, including test data, etc.: 65 224 No of bytes in distributed program, including test data, etc.: 409 198 Distribution format: tar.gz Catalogue identifier of previous version: ADCU_v1_0 Journal reference of previous version: Comput. Phys. Comm. 94 (1996) 249 Does the new version supersede the previous version?: Yes Nature of problem: Prediction of atomic spectra—atomic energy levels, oscillator strengths, and radiative decay rates—using a 'fully relativistic' approach. Solution method: Atomic orbitals are assumed to be four-component spinor eigenstates of the angular momentum operator, j=l+s, and the parity operator Π=βπ. Configuration state functions (CSFs) are linear combinations of Slater determinants of atomic orbitals, and are simultaneous eigenfunctions of the atomic electronic angular momentum operator, J, and the atomic parity operator, P. Lists of CSFs are either explicitly prescribed by the user or generated from a set of reference CSFs, a set of subshells, and rules for deriving other CSFs from these. Approximate atomic state functions (ASFs) are linear combinations of CSFs. A variational functional may be constructed by combining expressions for the energies of one or more ASFs. Average level (AL) functionals are weighted sums of energies of all possible ASFs that may be constructed from a set of CSFs; the number of ASFs is then the same as the number, n, of CSFs. Optimal level (OL) functionals are weighted sums of energies of some subset of ASFs; the GRASP92 package is optimized for this latter class of functionals. The composition of an ASF in terms of CSFs sharing the same quantum numbers is determined using the configuration-interaction (CI) procedure that results upon varying the expansion coefficients to determine the extremum of a variational functional. Radial functions may be determined by numerically solving the multiconfiguration Dirac-Fock (MCDF) equations that result upon varying the orbital radial functions or some subset thereof so as to obtain an extremum of the variational functional. Radial wavefunctions may also be determined using a screened hydrogenic or Thomas-Fermi model, although these schemes generally provide initial estimates for MCDF self-consistent-field (SCF) calculations. Transition properties for pairs of ASFs are computed from matrix elements of multipole operators of the electromagnetic field. All matrix elements of CSFs are evaluated using the Racah algebra. Reasons for the new version: During recent studies using the general relativistic atomic structure package (GRASP92), several errors were found, some of which might have been present already in the earlier GRASP92 version (program ABJN_v1_0, Comput. Phys. Comm. 55 (1989) 425). These errors were reported and discussed by Froese Fischer, Gaigalas, and Ralchenko in a separate publication [C. Froese Fischer, G. Gaigalas, Y. Ralchenko, Comput. Phys. Comm. 175 (2006) 738-744. [7

Cataloguing Standards; The Report of the Canadian Task Group on Cataloguing Standards.

ERIC Educational Resources Information Center

National Library of Canada, Ottawa (Ontario).

Following the recommendations of the National Conference on Cataloguing Standards held at the National Library of Canada in May 1970, a Canadian Task Group on Cataloguing Standards was set up to study and identify present deficiencies in the organizing and processing of Canadian material, and the cataloging problems of Canadian libraries, and to…

Coal Market Module - NEMS Documentation

EIA Publications

2014-01-01

Documents the objectives and the conceptual and methodological approach used in the development of the National Energy Modeling System's (NEMS) Coal Market Module (CMM) used to develop the Annual Energy Outlook 2014 (AEO2014). This report catalogues and describes the assumptions, methodology, estimation techniques, and source code of CMM's two submodules. These are the Coal Production Submodule (CPS) and the Coal Distribution Submodule (CDS).

VizieR Online Data Catalog: RMS survey: NIR spectroscopy of massive YSOs (Cooper+, 2013)

NASA Astrophysics Data System (ADS)

Cooper, H. D. B.; Lumsden, S. L.; Oudmaijer, R. D.; Hoare, M. G.; Clarke, A. J.; Urquhart, J. S.; Mottram, J. C.; Moore, T. J. T.; Davies, B.

2014-04-01

Spectroscopic observations of the YSO candidates were made using the UIST instrument at the United Kingdom Infra-Red Telescope (UKIRT) observatory from 2002 to 2008. 247 objects were successfully observed over 84 nights. Sources were selected from the ~2000 candidate MYSOs found using the MSX catalogue in the preceding stages of the RMS survey. (6 data files).

Extreme star formation in the Milky Way: luminosity distributions of young stellar objects in W49A and W51

NASA Astrophysics Data System (ADS)

Eden, D. J.; Moore, T. J. T.; Urquhart, J. S.; Elia, D.; Plume, R.; König, C.; Baldeschi, A.; Schisano, E.; Rigby, A. J.; Morgan, L. K.; Thompson, M. A.

2018-07-01

We have compared the star-formation properties of the W49A and W51 regions by using far-infrared data from the Herschel infrared Galactic Plane Survey (Hi-GAL) and 850-μm observations from the James Clerk Maxwell Telescope (JCMT) to obtain luminosities and masses, respectively, of associated compact sources. The former are infrared luminosities from the catalogue of Elia et al., while the latter are from the JCMT Plane survey source catalogue as well as measurements from new data. The clump-mass distributions of the two regions are found to be consistent with each other, as are the clump-formation efficiency and star-formation efficiency analogues. However, the frequency distributions of the luminosities of the young stellar objects are significantly different. While the luminosity distribution in W51 is consistent with Galaxy-wide samples, that of W49A is top heavy. The differences are not dramatic and are concentrated in the central regions of W49A. However, they suggest that physical conditions there, which are comparable in part to those in extragalactic starbursts, are significantly affecting the star-formation properties or evolution of the dense clumps in the region.

Extreme star formation in the Milky Way: Luminosity distributions of young stellar objects in W49A and W51

NASA Astrophysics Data System (ADS)

Eden, D. J.; Moore, T. J. T.; Urquhart, J. S.; Elia, D.; Plume, R.; König, C.; Baldeschi, A.; Schisano, E.; Rigby, A. J.; Morgan, L. K.; Thompson, M. A.

2018-03-01

We have compared the star-formation properties of the W49A and W51 regions by using far-infrared data from the Herschel infrared Galactic Plane Survey (Hi-GAL) and 850-μm observations from the James Clerk Maxwell Telescope (JCMT) to obtain luminosities and masses, respectively, of associated compact sources. The former are infrared luminosities from the catalogue of Elia et al. (2017), while the latter are from the JCMT Plane survey source catalogue as well as measurements from new data. The clump-mass distributions of the two regions are found to be consistent with each other, as are the clump-formation efficiency and star-formation efficiency analogues. However, the frequency distributions of the luminosities of the young stellar objects are significantly different. While the luminosity distribution in W51 is consistent with Galaxy-wide samples, that of W49A is top-heavy. The differences are not dramatic, and are concentrated in the central regions of W49A. However, they suggest that physical conditions there, which are comparable in part to those in extragalactic starbursts, are significantly affecting the star-formation properties or evolution of the dense clumps in the region.

A new version of the CADNA library for estimating round-off error propagation in Fortran programs

NASA Astrophysics Data System (ADS)

Jézéquel, Fabienne; Chesneaux, Jean-Marie; Lamotte, Jean-Luc

2010-11-01

The CADNA library enables one to estimate, using a probabilistic approach, round-off error propagation in any simulation program. CADNA provides new numerical types, the so-called stochastic types, on which round-off errors can be estimated. Furthermore CADNA contains the definition of arithmetic and relational operators which are overloaded for stochastic variables and the definition of mathematical functions which can be used with stochastic arguments. On 64-bit processors, depending on the rounding mode chosen, the mathematical library associated with the GNU Fortran compiler may provide incorrect results or generate severe bugs. Therefore the CADNA library has been improved to enable the numerical validation of programs on 64-bit processors. New version program summaryProgram title: CADNA Catalogue identifier: AEAT_v1_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEAT_v1_1.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 28 488 No. of bytes in distributed program, including test data, etc.: 463 778 Distribution format: tar.gz Programming language: Fortran NOTE: A C++ version of this program is available in the Library as AEGQ_v1_0 Computer: PC running LINUX with an i686 or an ia64 processor, UNIX workstations including SUN, IBM Operating system: LINUX, UNIX Classification: 6.5 Catalogue identifier of previous version: AEAT_v1_0 Journal reference of previous version: Comput. Phys. Commun. 178 (2008) 933 Does the new version supersede the previous version?: Yes Nature of problem: A simulation program which uses floating-point arithmetic generates round-off errors, due to the rounding performed at each assignment and at each arithmetic operation. Round-off error propagation may invalidate the result of a program. The CADNA library enables one to estimate round-off error propagation in any simulation program and to detect all numerical instabilities that may occur at run time. Solution method: The CADNA library [1-3] implements Discrete Stochastic Arithmetic [4,5] which is based on a probabilistic model of round-off errors. The program is run several times with a random rounding mode generating different results each time. From this set of results, CADNA estimates the number of exact significant digits in the result that would have been computed with standard floating-point arithmetic. Reasons for new version: On 64-bit processors, the mathematical library associated with the GNU Fortran compiler may provide incorrect results or generate severe bugs with rounding towards -∞ and +∞, which the random rounding mode is based on. Therefore a particular definition of mathematical functions for stochastic arguments has been included in the CADNA library to enable its use with the GNU Fortran compiler on 64-bit processors. Summary of revisions: If CADNA is used on a 64-bit processor with the GNU Fortran compiler, mathematical functions are computed with rounding to the nearest, otherwise they are computed with the random rounding mode. It must be pointed out that the knowledge of the accuracy of the stochastic argument of a mathematical function is never lost. Restrictions: CADNA requires a Fortran 90 (or newer) compiler. In the program to be linked with the CADNA library, round-off errors on complex variables cannot be estimated. Furthermore array functions such as product or sum must not be used. Only the arithmetic operators and the abs, min, max and sqrt functions can be used for arrays. Additional comments: In the library archive, users are advised to read the INSTALL file first. The doc directory contains a user guide named ug.cadna.pdf which shows how to control the numerical accuracy of a program using CADNA, provides installation instructions and describes test runs. The source code, which is located in the src directory, consists of one assembly language file (cadna_rounding.s) and eighteen Fortran language files. cadna_rounding.s is a symbolic link to the assembly file corresponding to the processor and the Fortran compiler used. This assembly file contains routines which are frequently called in the CADNA Fortran files to change the rounding mode. The Fortran language files contain the definition of the stochastic types on which the control of accuracy can be performed, CADNA specific functions (for instance to enable or disable the detection of numerical instabilities), the definition of arithmetic and relational operators which are overloaded for stochastic variables and the definition of mathematical functions which can be used with stochastic arguments. The examples directory contains seven test runs which illustrate the use of the CADNA library and the benefits of Discrete Stochastic Arithmetic. Running time: The version of a code which uses CADNA runs at least three times slower than its floating-point version. This cost depends on the computer architecture and can be higher if the detection of numerical instabilities is enabled. In this case, the cost may be related to the number of instabilities detected.

The Arcminute Microkelvin Imager catalogue of gamma-ray burst afterglows at 15.7 GHz

NASA Astrophysics Data System (ADS)

Anderson, G. E.; Staley, T. D.; van der Horst, A. J.; Fender, R. P.; Rowlinson, A.; Mooley, K. P.; Broderick, J. W.; Wijers, R. A. M. J.; Rumsey, C.; Titterington, D. J.

2018-01-01

We present the Arcminute Microkelvin Imager (AMI) Large Array catalogue of 139 gamma-ray bursts (GRBs). AMI observes at a central frequency of 15.7 GHz and is equipped with a fully automated rapid-response mode, which enables the telescope to respond to high-energy transients detected by Swift. On receiving a transient alert, AMI can be on-target within 2 min, scheduling later start times if the source is below the horizon. Further AMI observations are manually scheduled for several days following the trigger. The AMI GRB programme probes the early-time (<1 d) radio properties of GRBs, and has obtained some of the earliest radio detections (GRB 130427A at 0.36 and GRB 130907A at 0.51 d post-burst). As all Swift GRBs visible to AMI are observed, this catalogue provides the first representative sample of GRB radio properties, unbiased by multiwavelength selection criteria. We report the detection of six GRB radio afterglows that were not previously detected by other radio telescopes, increasing the rate of radio detections by 50 per cent over an 18-month period. The AMI catalogue implies a Swift GRB radio detection rate of ≳ 15 per cent, down to ∼0.2 mJy beam-1. However, scaling this by the fraction of GRBs AMI would have detected in the Chandra & Frail sample (all radio-observed GRBs between 1997 and 2011), it is possible ∼ 44-56 per cent of Swift GRBs are radio bright, down to ∼0.1-0.15 mJy beam-1. This increase from the Chandra & Frail rate (∼30 per cent) is likely due to the AMI rapid-response mode, which allows observations to begin while the reverse-shock is contributing to the radio afterglow.

Seismic hazard assessment of the Kivu rift segment based on a new seismotectonic zonation model (western branch, East African Rift system)

NASA Astrophysics Data System (ADS)

Delvaux, Damien; Mulumba, Jean-Luc; Sebagenzi, Mwene Ntabwoba Stanislas; Bondo, Silvanos Fiama; Kervyn, François; Havenith, Hans-Balder

2017-10-01

In the frame of the Belgian GeoRisCA multi-risk assessment project focusing on the Kivu and northern Tanganyika rift region in Central Africa, a new probabilistic seismic hazard assessment has been performed for the Kivu rift segment in the central part of the western branch of the East African rift system. As the geological and tectonic setting of this region is incompletely known, especially the part lying in the Democratic Republic of the Congo, we compiled homogeneous cross-border tectonic and neotectonic maps. The seismic risk assessment is based on a new earthquake catalogue based on the ISC reviewed earthquake catalogue and supplemented by other local catalogues and new macroseismic epicenter data spanning 126 years, with 1068 events. The magnitudes have been homogenized to Mw and aftershocks removed. The final catalogue used for the seismic hazard assessment spans 60 years, from 1955 to 2015, with 359 events and a magnitude of completeness of 4.4. The seismotectonic zonation into 7 seismic source areas was done on the basis of the regional geological structure, neotectonic fault systems, basin architecture and distribution of thermal springs and earthquake epicenters. The Gutenberg-Richter seismic hazard parameters were determined by the least square linear fit and the maximum likelihood method. Seismic hazard maps have been computed using existing attenuation laws with the Crisis 2012 software. We obtained higher PGA values (475 years return period) for the Kivu rift region than the previous estimates. They also vary laterally in function of the tectonic setting, with the lowest value in the volcanically active Virunga - Rutshuru zone, highest in the currently non-volcanic parts of Lake Kivu, Rusizi valley and North Tanganyika rift zone, and intermediate in the regions flanking the axial rift zone.

VizieR Online Data Catalog: NGC3115 & NGC1399 VEGAS-SSS globular clusters (Cantiello+, 2018)

NASA Astrophysics Data System (ADS)

Cantiello, M.; D'Abrusco, R.; Spavone, M.; Paolillo, M.; Capaccioli, M.; Limatola, L.; Grado, A.; Iodice, E.; Raimondo, G.; Napolitano, N.; Blakeslee, J. P.; Brocato, E.; Forbes, D. A.; Hilker, M.; Mieske, S.; Peletier, R.; van de Ven, G.; Schipani, P.

2017-11-01

Photometric catalogs for globular cluster (GC) candidates over the the 1 sq. degree area around NGC3115 and NGC1399 (ngc3115.dat and ngc1399.dat). The catalogues are based on u-, g- and i- band images from the VST elliptical galaxies survey (VEGAS). Aperture magnitudes, corrected for aperture correction are reported. We also provide the full catalogs of matched sources, which also include the matched background and foreground sources in the frames (ngc3115_full.dat and ngc1399_full.dat). (4 data files).

Next-to-minimal SOFTSUSY

NASA Astrophysics Data System (ADS)

Allanach, B. C.; Athron, P.; Tunstall, Lewis C.; Voigt, A.; Williams, A. G.

2014-09-01

We describe an extension to the SOFTSUSY program that provides for the calculation of the sparticle spectrum in the Next-to-Minimal Supersymmetric Standard Model (NMSSM), where a chiral superfield that is a singlet of the Standard Model gauge group is added to the Minimal Supersymmetric Standard Model (MSSM) fields. Often, a Z3 symmetry is imposed upon the model. SOFTSUSY can calculate the spectrum in this case as well as the case where general Z3 violating (denoted as =) terms are added to the soft supersymmetry breaking terms and the superpotential. The user provides a theoretical boundary condition for the couplings and mass terms of the singlet. Radiative electroweak symmetry breaking data along with electroweak and CKM matrix data are used as weak-scale boundary conditions. The renormalisation group equations are solved numerically between the weak scale and a high energy scale using a nested iterative algorithm. This paper serves as a manual to the NMSSM mode of the program, detailing the approximations and conventions used. Catalogue identifier: ADPM_v4_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADPM_v4_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 154886 No. of bytes in distributed program, including test data, etc.: 1870890 Distribution format: tar.gz Programming language: C++, fortran. Computer: Personal computer. Operating system: Tested on Linux 3.x. Word size: 64 bits Classification: 11.1, 11.6. Does the new version supersede the previous version?: Yes Catalogue identifier of previous version: ADPM_v3_0 Journal reference of previous version: Comput. Phys. Comm. 183 (2012) 785 Nature of problem: Calculating supersymmetric particle spectrum and mixing parameters in the next-to-minimal supersymmetric standard model. The solution to the renormalisation group equations must be consistent with boundary conditions on supersymmetry breaking parameters, as well as on the weak-scale boundary condition on gauge couplings, Yukawa couplings and the Higgs potential parameters. Solution method: Nested iterative algorithm and numerical minimisation of the Higgs potential. Reasons for new version: Major extension to include the next-to-minimal supersymmetric standard model. Summary of revisions: Added additional supersymmetric and supersymmetry breaking parameters associated with the additional gauge singlet. Electroweak symmetry breaking conditions are significantly changed in the next-to-minimal mode, and some sparticle mixing changes. An interface to NMSSMTools has also been included. Some of the object structure has also changed, and the command line interface has been made more user friendly. Restrictions: SOFTSUSY will provide a solution only in the perturbative regime and it assumes that all couplings of the model are real (i.e. CP-conserving). If the parameter point under investigation is non-physical for some reason (for example because the electroweak potential does not have an acceptable minimum), SOFTSUSY returns an error message. Running time: A few seconds per parameter point.

32 GHz Celestial Reference Frame Survey for Dec < -45 deg.

NASA Astrophysics Data System (ADS)

Horiuchi, Shinji; Phillips, Chris; Stevens, Jamie; Jacobs, Christopher; Sotuela, Ioana; Garcia miro, Cristina

2014-04-01

(We resubmit this proposal to extend from the previous semester. The 24 hour blocks for ATCA and Mopra were granted in May 2012 but canceled because fringe test before the scheduled experiment failed although fringes were detected between Mopra and Tidbinbilla. During the last scheduled LBA session for this project we discovered ATCA/Mopra had an issue with frequency standard, which has now been resolved.) We propose to conduct a LBA survey of compact radio sources at 32 GHz near the south pole region. This is the first attempt to fill the gap in the existing 32 GHz catalogue establish by NASA Deep Space Network toward completing the full sky celestial reference frame at 32 GHz. The catalogue will be used for future spacecraft navigation by NASA and other space agencies as well as for radio astronomical observations with southern radio telescope arrays such as ATCA and LBA.

VizieR Online Data Catalog: LMC PNe multiwavelength photometry (Reid, 2014)

NASA Astrophysics Data System (ADS)

Reid, W. A.

2017-07-01

Using the 2MASS 6x catalogue for the LMC (Cutri et al. 2003, Cat. II/246; 2012, Cat. VII/233), magnitudes were obtained for 274 PNe in J, 269 in H and 263 in Ks. To increase the number of detections available for comparison, magnitudes were also obtained from the InfraRed Survey Facility (IRSF) Magellanic Clouds Point Source Catalogue (Kato et al., 2007, Cat. II/288). The 3.6, 4.5, 5.8 and 8um bands were obtained with the IRAC on board Spitzer. This study used the archival data from the Spitzer legacy programme SAGE (Meixner et al., 2006, Cat. J/AJ/132/2268) which mapped the central 7x7deg2 area of the LMC. The MIPS data were also obtained from both the Hora et al. (2008, Cat. J/AJ/135/726) and Gruendl & Chu (2009, Cat. J/ApJS/184/172) studies. (3 data files).

mm_par2.0: An object-oriented molecular dynamics simulation program parallelized using a hierarchical scheme with MPI and OPENMP

NASA Astrophysics Data System (ADS)

Oh, Kwang Jin; Kang, Ji Hoon; Myung, Hun Joo

2012-02-01

We have revised a general purpose parallel molecular dynamics simulation program mm_par using the object-oriented programming. We parallelized the revised version using a hierarchical scheme in order to utilize more processors for a given system size. The benchmark result will be presented here. New version program summaryProgram title: mm_par2.0 Catalogue identifier: ADXP_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADXP_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC license, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 2 390 858 No. of bytes in distributed program, including test data, etc.: 25 068 310 Distribution format: tar.gz Programming language: C++ Computer: Any system operated by Linux or Unix Operating system: Linux Classification: 7.7 External routines: We provide wrappers for FFTW [1], Intel MKL library [2] FFT routine, and Numerical recipes [3] FFT, random number generator, and eigenvalue solver routines, SPRNG [4] random number generator, Mersenne Twister [5] random number generator, space filling curve routine. Catalogue identifier of previous version: ADXP_v1_0 Journal reference of previous version: Comput. Phys. Comm. 174 (2006) 560 Does the new version supersede the previous version?: Yes Nature of problem: Structural, thermodynamic, and dynamical properties of fluids and solids from microscopic scales to mesoscopic scales. Solution method: Molecular dynamics simulation in NVE, NVT, and NPT ensemble, Langevin dynamics simulation, dissipative particle dynamics simulation. Reasons for new version: First, object-oriented programming has been used, which is known to be open for extension and closed for modification. It is also known to be better for maintenance. Second, version 1.0 was based on atom decomposition and domain decomposition scheme [6] for parallelization. However, atom decomposition is not popular due to its poor scalability. On the other hand, domain decomposition scheme is better for scalability. It still has a limitation in utilizing a large number of cores on recent petascale computers due to the requirement that the domain size is larger than the potential cutoff distance. To go beyond such a limitation, a hierarchical parallelization scheme has been adopted in this new version and implemented using MPI [7] and OPENMP [8]. Summary of revisions: (1) Object-oriented programming has been used. (2) A hierarchical parallelization scheme has been adopted. (3) SPME routine has been fully parallelized with parallel 3D FFT using volumetric decomposition scheme [9]. K.J.O. thanks Mr. Seung Min Lee for useful discussion on programming and debugging. Running time: Running time depends on system size and methods used. For test system containing a protein (PDB id: 5DHFR) with CHARMM22 force field [10] and 7023 TIP3P [11] waters in simulation box having dimension 62.23 Å×62.23 Å×62.23 Å, the benchmark results are given in Fig. 1. Here the potential cutoff distance was set to 12 Å and the switching function was applied from 10 Å for the force calculation in real space. For the SPME [12] calculation, K, K, and K were set to 64 and the interpolation order was set to 4. To do the fast Fourier transform, we used Intel MKL library. All bonds including hydrogen atoms were constrained using SHAKE/RATTLE algorithms [13,14]. The code was compiled using Intel compiler version 11.1 and mvapich2 version 1.5. Fig. 2 shows performance gains from using CUDA-enabled version [15] of mm_par for 5DHFR simulation in water on Intel Core2Quad 2.83 GHz and GeForce GTX 580. Even though mm_par2.0 is not ported yet for GPU, its performance data would be useful to expect mm_par2.0 performance on GPU. Timing results for 1000 MD steps. 1, 2, 4, and 8 in the figure mean the number of OPENMP threads. Timing results for 1000 MD steps from double precision simulation on CPU, single precision simulation on GPU, and double precision simulation on GPU.

Pre_GI: a global map of ontological links between horizontally transferred genomic islands in bacterial and archaeal genomes

PubMed Central

Pierneef, Rian; Cronje, Louis; Bezuidt, Oliver; Reva, Oleg N.

2015-01-01

Abstract The Predicted Genomic Islands database (Pre_GI) is a comprehensive repository of prokaryotic genomic islands (islands, GIs) freely accessible at http://pregi.bi.up.ac.za/index.php . Pre_GI, Version 2015, catalogues 26 744 islands identified in 2407 bacterial/archaeal chromosomes and plasmids. It provides an easy-to-use interface which allows users the ability to query against the database with a variety of fields, parameters and associations. Pre_GI is constructed to be a web-resource for the analysis of ontological roads between islands and cartographic analysis of the global fluxes of mobile genetic elements through bacterial and archaeal taxonomic borders. Comparison of newly identified islands against Pre_GI presents an alternative avenue to identify their ontology, origin and relative time of acquisition. Pre_GI aims to aid research on horizontal transfer events and materials through providing data and tools for holistic investigation of migration of genes through ecological niches and taxonomic boundaries. Database URL: http://pregi.bi.up.ac.za/index.php , Version 2015 PMID:26200753

[A brief textual research on circulated versions of Dan tai yu an (Jade Case Records of Red Stage].

PubMed

Xu, Gao; Zhu, Jianping

2014-03-01

Dan tai yu an (Jade Case Records of Red Stage) was compiled by a doctor of the Ming Dynasty Sun Wenyin, including 6 volumes. This book involves Chinese internal medicine, paediatrics, gynaecology, external medicine, and Department of the sense organs (ENT) classified into 73 categories, each of which contains 80 kinds of disease. The total number of disease was 157. Each kind of disease is discussed under the order of etiology, syndrome, pulse condition and treatment. The range of traditional Chinese prescriptions in this book is rather extensive with its indications, administrations and modification of main prescriptions given concretely. Both internal and external treatment are included, and the individual drug and proved recipe are practical and effective, which is a significant reference to clinical practice. There are many versions of this book extant. According to our investigation and research, we replenished some information to the"General Catalogue of TCM Ancient Books", and at the same time, correct some mistakes, providing the basis for further collation and publishing.

Dark Energy Survey Year 1 Results: Weak Lensing Shape Catalogues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zuntz, J.; et al.

We present two galaxy shape catalogues from the Dark Energy Survey Year 1 data set, covering 1500 square degrees with a median redshift ofmore » $0.59$. The catalogues cover two main fields: Stripe 82, and an area overlapping the South Pole Telescope survey region. We describe our data analysis process and in particular our shape measurement using two independent shear measurement pipelines, METACALIBRATION and IM3SHAPE. The METACALIBRATION catalogue uses a Gaussian model with an innovative internal calibration scheme, and was applied to $riz$-bands, yielding 34.8M objects. The IM3SHAPE catalogue uses a maximum-likelihood bulge/disc model calibrated using simulations, and was applied to $r$-band data, yielding 21.9M objects. Both catalogues pass a suite of null tests that demonstrate their fitness for use in weak lensing science. We estimate the 1$$\\sigma$$ uncertainties in multiplicative shear calibration to be $0.013$ and $0.025$ for the METACALIBRATION and IM3SHAPE catalogues, respectively.« less

CATPAC -- Catalogue Applications Package on UNIX

NASA Astrophysics Data System (ADS)

Wood, A. R.

CATPAC is the STARLINK Catalogue and Table Package. This document describes the CATPAC applications available on UNIX. These include applications for inputing, processing and reporting tabular data including astronomical catalogues.

Real time monitoring of induced seismicity in the Insheim and Landau deep geothermal reservoirs, Upper Rhine Graben, using the new SeisComP3 cross-correlation detector

NASA Astrophysics Data System (ADS)

Vasterling, Margarete; Wegler, Ulrich; Bruestle, Andrea; Becker, Jan

2016-04-01

Real time information on the locations and magnitudes of induced earthquakes is essential for response plans based on the magnitude frequency distribution. We developed and tested a real time cross-correlation detector focusing on induced microseismicity in deep geothermal reservoirs. The incoming seismological data are cross-correlated in real time with a set of known master events. We use the envelopes of the seismograms rather than the seismograms themselves to account for small changes in the source locations or in the focal mechanisms. Two different detection conditions are implemented: After first passing a single trace correlation condition, secondly a network correlation is calculated taking the amplitude information of the seismic network into account. The magnitude is estimated by using the respective ratio of the maximum amplitudes of the master event and the detected event. The detector is implemented as a real time tool and put into practice as a SeisComp3 module, an established open source software for seismological real time data handling and analysis. We validated the reliability and robustness of the detector by an offline playback test using four month of data from monitoring the power plant in Insheim (Upper Rhine Graben, SW Germany). Subsequently, in October 2013 the detector was installed as real time monitoring system within the project "MAGS2 - Microseismic Activity of Geothermal Systems". Master events from the two neighboring geothermal power plants in Insheim and Landau and two nearby quarries are defined. After detection, manual phase determination and event location are performed at the local seismological survey of the Geological Survey and Mining Authority of Rhineland-Palatinate. Until November 2015 the detector identified 454 events out of which 95% were assigned correctly to the respective source. 5% were misdetections caused by local tectonic events. To evaluate the completeness of the automatically obtained catalogue, it is compared to the event catalogue of the Seismological Service of Southwestern Germany and to the events reported by the company tasked with seismic monitoring of the Insheim power plant. Events missed by the cross-correlation detector are generally very small. They are registered at too few stations to meet the detection criteria. Most of these small events were not locatable. The automatic catalogue has a magnitude of completeness around 0.0 and is significantly more detailed than the catalogue from standard processing of the Seismological Service of Southwestern Germany for this region. For events in the magnitude range of the master event the magnitude estimated from the amplitude ratio reproduces the local magnitude well. For weaker events there tends to be a small offset. Altogether, the developed real time cross correlation detector provides robust detections with reliable association of the events to the respective sources and valid magnitude estimates. Thus, it provides input parameters for the mitigation of seismic hazard by using response plans in real time.

Mixture Modeling for Background and Sources Separation in x-ray Astronomical Images

NASA Astrophysics Data System (ADS)

Guglielmetti, Fabrizia; Fischer, Rainer; Dose, Volker

2004-11-01

A probabilistic technique for the joint estimation of background and sources in high-energy astrophysics is described. Bayesian probability theory is applied to gain insight into the coexistence of background and sources through a probabilistic two-component mixture model, which provides consistent uncertainties of background and sources. The present analysis is applied to ROSAT PSPC data (0.1-2.4 keV) in Survey Mode. A background map is modelled using a Thin-Plate spline. Source probability maps are obtained for each pixel (45 arcsec) independently and for larger correlation lengths, revealing faint and extended sources. We will demonstrate that the described probabilistic method allows for detection improvement of faint extended celestial sources compared to the Standard Analysis Software System (SASS) used for the production of the ROSAT All-Sky Survey (RASS) catalogues.

New Generation of Catalogues for the New Generation of Users: A Comparison of Six Library Catalogues

ERIC Educational Resources Information Center

Mercun, Tanja; Zumer, Maja

2008-01-01

Purpose: The purpose of this paper is to describe some of the problems and issues faced by online library catalogues. It aims to establish how libraries have undertaken the mission of developing the next generation catalogues and how they compare to new tools such as Amazon. Design/methodology/approach: An expert study was carried out in January…

LU60645GT and MA132843GT Catalogues of Lunar and Martian Impact Craters Developed Using a Crater Shape-based Interpolation Crater Detection Algorithm for Topography Data

NASA Technical Reports Server (NTRS)

Salamuniccar, Goran; Loncaric, Sven; Mazarico, Erwan Matias

2012-01-01

For Mars, 57,633 craters from the manually assembled catalogues and 72,668 additional craters identified using several crater detection algorithms (CDAs) have been merged into the MA130301GT catalogue. By contrast, for the Moon the most complete previous catalogue contains only 14,923 craters. Two recent missions provided higher-quality digital elevation maps (DEMs): SELENE (in 1/16° resolution) and Lunar Reconnaissance Orbiter (we used up to 1/512°). This was the main motivation for work on the new Crater Shape-based interpolation module, which improves previous CDA as follows: (1) it decreases the number of false-detections for the required number of true detections; (2) it improves detection capabilities for very small craters; and (3) it provides more accurate automated measurements of craters' properties. The results are: (1) LU60645GT, which is currently the most complete (up to D>=8 km) catalogue of Lunar craters; and (2) MA132843GT catalogue of Martian craters complete up to D>=2 km, which is the extension of the previous MA130301GT catalogue. As previously achieved for Mars, LU60645GT provides all properties that were provided by the previous Lunar catalogues, plus: (1) correlation between morphological descriptors from used catalogues; (2) correlation between manually assigned attributes and automated measurements; (3) average errors and their standard deviations for manually and automatically assigned attributes such as position coordinates, diameter, depth/diameter ratio, etc; and (4) a review of positional accuracy of used datasets. Additionally, surface dating could potentially be improved with the exhaustiveness of this new catalogue. The accompanying results are: (1) the possibility of comparing a large number of Lunar and Martian craters, of e.g. depth/diameter ratio and 2D profiles; (2) utilisation of a method for re-projection of datasets and catalogues, which is very useful for craters that are very close to poles; and (3) the extension of the previous framework for evaluation of CDAs with datasets and ground-truth catalogue for the Moon.

Gradient pattern analysis applied to galaxy morphology

NASA Astrophysics Data System (ADS)

Rosa, R. R.; de Carvalho, R. R.; Sautter, R. A.; Barchi, P. H.; Stalder, D. H.; Moura, T. C.; Rembold, S. B.; Morell, D. R. F.; Ferreira, N. C.

2018-06-01

Gradient pattern analysis (GPA) is a well-established technique for measuring gradient bilateral asymmetries of a square numerical lattice. This paper introduces an improved version of GPA designed for galaxy morphometry. We show the performance of the new method on a selected sample of 54 896 objects from the SDSS-DR7 in common with Galaxy Zoo 1 catalogue. The results suggest that the second gradient moment, G2, has the potential to dramatically improve over more conventional morphometric parameters. It separates early- from late-type galaxies better (˜ 90 per cent) than the CAS system (C˜ 79 per cent, A˜ 50 per cent, S˜ 43 per cent) and a benchmark test shows that it is applicable to hundreds of thousands of galaxies using typical processing systems.

Motion4D-library extended

NASA Astrophysics Data System (ADS)

Müller, Thomas

2011-06-01

The new version of the Motion4D-library now also includes the integration of a Sachs basis and the Jacobi equation to determine gravitational lensing of pointlike sources for arbitrary spacetimes.New version program summaryProgram title: Motion4D-libraryCatalogue identifier: AEEX_v3_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEX_v3_0.htmlProgram obtainable from: CPC Program Library, Queen's University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 219 441No. of bytes in distributed program, including test data, etc.: 6 968 223Distribution format: tar.gzProgramming language: C++Computer: All platforms with a C++ compilerOperating system: Linux, WindowsRAM: 61 MbytesClassification: 1.5External routines: Gnu Scientic Library (GSL) (http://www.gnu.org/software/gsl/)Catalogue identifier of previous version: AEEX_v2_0Journal reference of previous version: Comput. Phys. Comm. 181 (2010) 703Does the new version supersede the previous version?: YesNature of problem: Solve geodesic equation, parallel and Fermi-Walker transport in four-dimensional Lorentzian spacetimes. Determine gravitational lensing by integration of Jacobi equation and parallel transport of Sachs basis.Solution method: Integration of ordinary differential equations.Reasons for new version: The main novelty of the current version is the extension to integrate the Jacobi equation and the parallel transport of the Sachs basis along null geodesics. In combination, the change of the cross section of a light bundle and thus the gravitational lensing effect of a spacetime can be determined. Furthermore, we have implemented several new metrics.Summary of revisions: The main novelty of the current version is the integration of the Jacobi equation and the parallel transport of the Sachs basis along null geodesics. The corresponding set of equations readd2xμdλ2=-Γρσμdxρdλdxσdλ, ds1,2μdλ=-Γρσμdxρdλs1,2σ, d2Y1,2μdλ2=-2ΓρσμdxρdλdY1,2σdλ-Γρσ,νμdxρdλdxσdλYν, where (1) is the geodesic equation, (2) represents the parallel transport of the two Sachs basis vectors s, and (3) is the Jacobi equation for the two Jacobi fields Y.The initial directions of the Sachs basis vectors s=(0,s)=s1,2μ∂ are defined perpendicular to the initial direction υ→ of the light ray, see also Fig. 1,s=(-, s=(-. Display OmittedA congruence of null geodesics with central null geodesic γ which starts at the observer O with an infinitesimal circular cross section is defined by the above mentioned two Jacobi fields with initial conditions Y1,2μ|=0 and (dY1,2μ/dλ)|=s1,2μ. The cross section of this congruence along γ is described by the Jacobian J(λ)=gYiμsjν|. However, to determine the gravitational lensing of a pointlike source S that is connected to the observer via γ, we need the reverse Jacobian JS. Fortunately, the reverse Jacobian is just the negative transpose of the original Jacobian JO,J:=JS=-(J)T. The Jacobian J transforms the circular shape of the congruence into an ellipse whose shape parameters (M: major/minor axis, ψ: angle of major axis, ɛ: ellipticity) readM=2αsinζcosζ-βsin2ζ+J112+J212, ψ=arctan2(Jcosζ+Jsinζ,Jcosζ+Jsinζ), ɛ=‖M-M‖‖M+M‖ withζ=12arctan2αβ,ζ=ζ+π2, and the parameters α=JJ+JJ, β=J112-J122+J212-J222. The magnification factor is given byμ=λ2MM. These shape parameters can be easily visualized in the new version of the GeodesicViewer, see Ref. [1]. A detailed discussion of gravitational lensing can be found, for example, in Schneider et al. [2].In the following, a list of newly implemented metrics is given:BertottiKasner: see Rindler [3].BesselGravWaveCart: gravitational Bessel wave from Kramer [4].DeSitterUniv, DeSitterUnivConf: de Sitter universe in Cartesian and conformal coordinates.Ernst: Black hole in a magnetic universe by Ernst [5].ExtremeReissnerNordstromDihole: see Chandrasekhar [6].HalilsoyWave: see Ref. [7].JaNeWi: Janis-Newman-Winicour metric, see Ref. [8].MinkowskiConformal: Minkowski metric in conformally rescaled coordinates.PTD_AI, PTD_AII, PTD_AIII, PTD_BI, PTD_BII, PTD_BIII, PTD_C Petrov-Type D - Levi-Civita spacetimes, see Ref. [7].PainleveGullstrand: Schwarzschild metric in Painlevé-Gullstrand coordinates, see Ref. [9].PlaneGravWave: Plane gravitational wave, see Ref. [10].SchwarzschildIsotropic: Schwarzschild metric in isotropic coordinates, see Ref. [11].SchwarzschildTortoise: Schwarzschild metric in tortoise coordinates, see Ref. [11].Sultana-Dyer: A black hole in the Einstein-de Sitter universe by Sultana and Dyer [12].TaubNUT: see Ref. [13]. The Christoffel symbols and the natural local tetrads of these new metrics are given in the Catalogue of Spacetimes, Ref. [14].To study the behavior of geodesics, it is often useful to determine an effective potential like in classical mechanics. For several metrics, we followed the Euler-Lagrangian approach as described by Rindler [10] and implemented an effective potential for a specific situation. As an example, consider the Lagrangian L=-αt˙+α-1r˙+r2φ˙ for timelike geodesics in the ϑ=π/2 hypersurface in the Schwarzschild spacetime with α=1-2m/r. The Euler-Lagrangian equations lead to the energy balance equation r˙+V(r)=k2 with the effective potential V(r)=(r-2m)(r2+h2)/r3 and the constants of motion k=αt˙ and h=r2φ˙. The constants of motion for a timelike geodesic that starts at (r=10m,φ=0) with initial direction ξ=π/4 with respect to the black hole direction and with initial velocity β=0.7 read k≈1.252 and h≈6.931. Then, from the energy balance equation we immediately obtain the radius of closest approach r≈5.927.Beside a standard Runge-Kutta fourth-order integrator and the integrators of the Gnu Scientific Library (GSL), we also implemented a standard Bulirsch-Stoer integrator.Running time: The test runs provided with the distribution require only a few seconds to run.References:T. Müller, New version announcement to the GeodesicViewer, http://cpc.cs.qub.ac.uk/summaries/AEFP_v2_0.html.P. Schneider, J. Ehlers, E. E. Falco, Gravitational Lenses, Springer, 1992.W. Rindler, Phys. Lett. A 245 (1998) 363.D. Kramer, Ann. Phys. 9 (2000) 331.F.J. Ernst, J. Math. Phys. 17 (1976) 54.S. Chandrasekhar, Proc. R. Soc. Lond. A 421 (1989) 227.H. Stephani, D. Kramer, M. MacCallum, C. Hoenselaers, E. Herlt, Exact Solutions of the Einstein Field Equations, Cambridge University Press, 2009.A.I. Janis, E.T. Newman, J. Winicour, Phys. Rev. Lett. 20 (1968) 878.K. Martel, E. Poisson, Am. J. Phys. 69 (2001) 476.W. Rindler, Relativity - Special, General, and Cosmology, Oxford University Press, Oxford, 2007.C.W. Misner, K.S. Thorne, J.A. Wheeler, Gravitation, W.H. Freeman, 1973.J. Sultana, C.C. Dyer, Gen. Relativ. Gravit. 37 (2005) 1349.D. Bini, C. Cherubini, Robert T. Jantzen, Class. Quantum Grav. 19 (2002) 5481.T. Muller, F. Grave, arXiv:0904.4184 [gr-qc].

Grid computing enhances standards-compatible geospatial catalogue service

NASA Astrophysics Data System (ADS)

Chen, Aijun; Di, Liping; Bai, Yuqi; Wei, Yaxing; Liu, Yang

2010-04-01

A catalogue service facilitates sharing, discovery, retrieval, management of, and access to large volumes of distributed geospatial resources, for example data, services, applications, and their replicas on the Internet. Grid computing provides an infrastructure for effective use of computing, storage, and other resources available online. The Open Geospatial Consortium has proposed a catalogue service specification and a series of profiles for promoting the interoperability of geospatial resources. By referring to the profile of the catalogue service for Web, an innovative information model of a catalogue service is proposed to offer Grid-enabled registry, management, retrieval of and access to geospatial resources and their replicas. This information model extends the e-business registry information model by adopting several geospatial data and service metadata standards—the International Organization for Standardization (ISO)'s 19115/19119 standards and the US Federal Geographic Data Committee (FGDC) and US National Aeronautics and Space Administration (NASA) metadata standards for describing and indexing geospatial resources. In order to select the optimal geospatial resources and their replicas managed by the Grid, the Grid data management service and information service from the Globus Toolkits are closely integrated with the extended catalogue information model. Based on this new model, a catalogue service is implemented first as a Web service. Then, the catalogue service is further developed as a Grid service conforming to Grid service specifications. The catalogue service can be deployed in both the Web and Grid environments and accessed by standard Web services or authorized Grid services, respectively. The catalogue service has been implemented at the George Mason University/Center for Spatial Information Science and Systems (GMU/CSISS), managing more than 17 TB of geospatial data and geospatial Grid services. This service makes it easy to share and interoperate geospatial resources by using Grid technology and extends Grid technology into the geoscience communities.

Solar flares, coronal mass ejections and solar energetic particle event characteristics

NASA Astrophysics Data System (ADS)

Papaioannou, Athanasios; Sandberg, Ingmar; Anastasiadis, Anastasios; Kouloumvakos, Athanasios; Georgoulis, Manolis K.; Tziotziou, Kostas; Tsiropoula, Georgia; Jiggens, Piers; Hilgers, Alain

2016-12-01

A new catalogue of 314 solar energetic particle (SEP) events extending over a large time span from 1984 to 2013 has been compiled. The properties as well as the associations of these SEP events with their parent solar sources have been thoroughly examined. The properties of the events include the proton peak integral flux and the fluence for energies above 10, 30, 60 and 100 MeV. The associated solar events were parametrized by solar flare (SF) and coronal mass ejection (CME) characteristics, as well as related radio emissions. In particular, for SFs: the soft X-ray (SXR) peak flux, the SXR fluence, the heliographic location, the rise time and the duration were exploited; for CMEs the plane-of-sky velocity as well as the angular width were utilized. For radio emissions, type III, II and IV radio bursts were identified. Furthermore, we utilized element abundances of Fe and O. We found evidence that most of the SEP events in our catalogue do not conform to a simple two-class paradigm, with the 73% of them exhibiting both type III and type II radio bursts, and that a continuum of event properties is present. Although, the so-called hybrid or mixed events are found to be present in our catalogue, it was not possible to attribute each SEP event to a mixed/hybrid sub-category. Moreover, it appears that the start of the type III burst most often precedes the maximum of the SF and thus falls within the impulsive phase of the associated SF. At the same time, type III bursts take place within ≈5.22 min, on average, in advance from the time of maximum of the derivative of the SXR flux (Neupert effect). We further performed a statistical analysis and a mapping of the logarithm of the proton peak flux at E > 10 MeV, on different pairs of the parent solar source characteristics. This revealed correlations in 3-D space and demonstrated that the gradual SEP events that stem from the central part of the visible solar disk constitute a significant radiation risk. The velocity of the associated CMEs, as well as the SXR peak flux and fluence, are all fairly significantly correlated to both the proton peak flux and the fluence of the SEP events in our catalogue. The strongest correlation to SEP characteristics is manifested by the CME velocity.

The Swift/UVOT catalogue of NGC 4321 star-forming sources: a case against density wave theory

NASA Astrophysics Data System (ADS)

Ferreras, Ignacio; Cropper, Mark; Kawata, Daisuke; Page, Mat; Hoversten, Erik A.

2012-08-01

We study the star-forming regions in the spiral galaxy NGC 4321 (M100). We take advantage of the spatial resolution (2.5 arcsec full width at half-maximum) of the Swift/Ultraviolet/Optical Telescope camera and the availability of three ultraviolet (UV) passbands in the region 1600 < λ < 3000 Å, in combination with optical and infrared (IR) imaging from Sloan Digital Sky Survey, KPNO/Hα and Spitzer/IRAC, to obtain a catalogue of 787 star-forming regions out to three disc scalelengths. We use a large volume of star formation histories, combined with stellar population synthesis, to determine the properties of the young stellar component and its relationship with the spiral arms. The Hα luminosities of the sources have a strong decreasing radial trend, suggesting more massive star-forming regions in the central part of the galaxy. When segregated with respect to near-UV (NUV)-optical colour, blue sources have a significant excess of flux in the IR at 8 μm, revealing the contribution from polycyclic aromatic hydrocarbons, although the overall reddening of these sources stays below E(B - V) = 0.2 mag. The distribution of distances to the spiral arms is compared for subsamples selected according to Hα luminosity, NUV-optical colour or ages derived from a population synthesis model. An offset would be expected between these subsamples as a function of radius if the pattern speed of the spiral arm were constant - as predicted by classic density wave theory. No significant offsets are found, favouring instead a mechanism where the pattern speed has a radial dependence.

LOFAR-Boötes: properties of high- and low-excitation radio galaxies at 0.5 < z < 2.0

NASA Astrophysics Data System (ADS)

Williams, W. L.; Calistro Rivera, G.; Best, P. N.; Hardcastle, M. J.; Röttgering, H. J. A.; Duncan, K. J.; de Gasperin, F.; Jarvis, M. J.; Miley, G. K.; Mahony, E. K.; Morabito, L. K.; Nisbet, D. M.; Prandoni, I.; Smith, D. J. B.; Tasse, C.; White, G. J.

2018-04-01

This paper presents a study of the redshift evolution of radio-loud active galactic nuclei (AGN) as a function of the properties of their galaxy hosts in the Boötes field. To achieve this we match low-frequency radio sources from deep 150-MHz LOFAR (LOw Frequency ARray) observations to an I-band-selected catalogue of galaxies, for which we have derived photometric redshifts, stellar masses, and rest-frame colours. We present spectral energy distribution (SED) fitting to determine the mid-infrared AGN contribution for the radio sources and use this information to classify them as high- versus low-excitation radio galaxies (HERGs and LERGs) or star-forming galaxies. Based on these classifications, we construct luminosity functions for the separate redshift ranges going out to z = 2. From the matched radio-optical catalogues, we select a sub-sample of 624 high power (P150 MHz > 1025 W Hz-1) radio sources between 0.5 ≤ z < 2. For this sample, we study the fraction of galaxies hosting HERGs and LERGs as a function of stellar mass and host galaxy colour. The fraction of HERGs increases with redshift, as does the fraction of sources in galaxies with lower stellar masses. We find that the fraction of galaxies that host LERGs is a strong function of stellar mass as it is in the local Universe. This, combined with the strong negative evolution of the LERG luminosity functions over this redshift range, is consistent with LERGs being fuelled by hot gas in quiescent galaxies.

VizieR Online Data Catalog: AzTEC/ASTE source catalogue (Aretxaga+, 2011)

NASA Astrophysics Data System (ADS)

Aretxaga, I.; Wilson, G. W.; Aguilar, E.; Alberts, S.; Scott, K. S.; Scoville, N.; Yun, M. S.; Austermann, J.; Downes, T. P.; Ezawa, H.; Hatsukade, B.; Hughes, D. H.; Kawabe, R.; Kohno, K.; Oshima, T.; Perera, T. A.; Tamura, Y.; Zeballos, M.

2013-02-01

We imaged a 2800 arcmin2 field centred at right ascension RA(J2000.0)=10:00:30.00 and declination DE(J2000.0)=2:14.00 with AzTEC mounted on the 10-m ASTE, located at 4800m in the Atacama Desert of Chile. The survey was carried out from 2008 October 20 to November 30. (1 data file).

The Bible as a Resource for Teaching Cataloguing and Classification

ERIC Educational Resources Information Center

Unegbu, Vincent E.; Onuoha, Uloma D.

2013-01-01

The Bible is an important book that represents all courses that human beings engage in. Many professions use it as a textbook for their course, as are listed in this write up. In spite of the rich source of information embedded in it, library and information professions are yet to tap into it. The first two chapters of the Bible are a very good…

Federal Education Funding: Overview of K-12 and Early Childhood Education Programs. Report to Congressional Requesters. GAO-10-51

ERIC Educational Resources Information Center

Scott, George A.

2010-01-01

Over the last two decades there have been a number of efforts to catalogue and determine how much is spent on federal education programs. However, because education programs are administered by agencies throughout the federal government, and there is no standard definition of a federal education program, there currently is no single source that…

The SCUBA-2 Cosmology Legacy Survey: 850 μm maps, catalogues and number counts

NASA Astrophysics Data System (ADS)

Geach, J. E.; Dunlop, J. S.; Halpern, M.; Smail, Ian; van der Werf, P.; Alexander, D. M.; Almaini, O.; Aretxaga, I.; Arumugam, V.; Asboth, V.; Banerji, M.; Beanlands, J.; Best, P. N.; Blain, A. W.; Birkinshaw, M.; Chapin, E. L.; Chapman, S. C.; Chen, C.-C.; Chrysostomou, A.; Clarke, C.; Clements, D. L.; Conselice, C.; Coppin, K. E. K.; Cowley, W. I.; Danielson, A. L. R.; Eales, S.; Edge, A. C.; Farrah, D.; Gibb, A.; Harrison, C. M.; Hine, N. K.; Hughes, D.; Ivison, R. J.; Jarvis, M.; Jenness, T.; Jones, S. F.; Karim, A.; Koprowski, M.; Knudsen, K. K.; Lacey, C. G.; Mackenzie, T.; Marsden, G.; McAlpine, K.; McMahon, R.; Meijerink, R.; Michałowski, M. J.; Oliver, S. J.; Page, M. J.; Peacock, J. A.; Rigopoulou, D.; Robson, E. I.; Roseboom, I.; Rotermund, K.; Scott, Douglas; Serjeant, S.; Simpson, C.; Simpson, J. M.; Smith, D. J. B.; Spaans, M.; Stanley, F.; Stevens, J. A.; Swinbank, A. M.; Targett, T.; Thomson, A. P.; Valiante, E.; Wake, D. A.; Webb, T. M. A.; Willott, C.; Zavala, J. A.; Zemcov, M.

2017-02-01

We present a catalogue of ˜3000 submillimetre sources detected (≥3.5σ) at 850 μm over ˜5 deg2 surveyed as part of the James Clerk Maxwell Telescope (JCMT) SCUBA-2 Cosmology Legacy Survey (S2CLS). This is the largest survey of its kind at 850 μm, increasing the sample size of 850 μm selected submillimetre galaxies by an order of magnitude. The wide 850 μm survey component of S2CLS covers the extragalactic fields: UKIDSS-UDS, COSMOS, Akari-NEP, Extended Groth Strip, Lockman Hole North, SSA22 and GOODS-North. The average 1σ depth of S2CLS is 1.2 mJy beam-1, approaching the SCUBA-2 850 μm confusion limit, which we determine to be σc ≈ 0.8 mJy beam-1. We measure the 850 μm number counts, reducing the Poisson errors on the differential counts to approximately 4 per cent at S850 ≈ 3 mJy. With several independent fields, we investigate field-to-field variance, finding that the number counts on 0.5°-1° scales are generally within 50 per cent of the S2CLS mean for S850 > 3 mJy, with scatter consistent with the Poisson and estimated cosmic variance uncertainties, although there is a marginal (2σ) density enhancement in GOODS-North. The observed counts are in reasonable agreement with recent phenomenological and semi-analytic models, although determining the shape of the faint-end slope (S850 < 3 mJy) remains a key test. The large solid angle of S2CLS allows us to measure the bright-end counts: at S850 > 10 mJy there are approximately 10 sources per square degree, and we detect the distinctive up-turn in the number counts indicative of the detection of local sources of 850 μm emission, and strongly lensed high-redshift galaxies. All calibrated maps and the catalogue are made publicly available.

Deep 20-GHz survey of the Chandra Deep Field South and SDSS Stripe 82: source catalogue and spectral properties

NASA Astrophysics Data System (ADS)

Franzen, Thomas M. O.; Sadler, Elaine M.; Chhetri, Rajan; Ekers, Ronald D.; Mahony, Elizabeth K.; Murphy, Tara; Norris, Ray P.; Waldram, Elizabeth M.; Whittam, Imogen H.

2014-04-01

We present a source catalogue and first results from a deep, blind radio survey carried out at 20 GHz with the Australia Telescope Compact Array, with follow-up observations at 5.5, 9 and 18 GHz. The Australia Telescope 20 GHz (AT20G) deep pilot survey covers a total area of 5 deg2 in the Chandra Deep Field South and in Stripe 82 of the Sloan Digital Sky Survey. We estimate the survey to be 90 per cent complete above 2.5 mJy. Of the 85 sources detected, 55 per cent have steep spectra (α _{1.4}^{20} < -0.5) and 45 per cent have flat or inverted spectra (α _{1.4}^{20} ≥ -0.5). The steep-spectrum sources tend to have single power-law spectra between 1.4 and 18 GHz, while the spectral indices of the flat- or inverted-spectrum sources tend to steepen with frequency. Among the 18 inverted-spectrum (α _{1.4}^{20} ≥ 0.0) sources, 10 have clearly defined peaks in their spectra with α _{1.4}^{5.5} > 0.15 and α 9^{18} < -0.15. On a 3-yr time-scale, at least 10 sources varied by more than 15 per cent at 20 GHz, showing that variability is still common at the low flux densities probed by the AT20G-deep pilot survey. We find a strong and puzzling shift in the typical spectral index of the 15-20-GHz source population when combining data from the AT20G, Ninth Cambridge and Tenth Cambridge surveys: there is a shift towards a steeper-spectrum population when going from ˜1 Jy to ˜5 mJy, which is followed by a shift back towards a flatter-spectrum population below ˜5 mJy. The 5-GHz source-count model by Jackson & Wall, which only includes contributions from FRI and FRII sources, and star-forming galaxies, does not reproduce the observed flattening of the flat-spectrum counts below ˜5 mJy. It is therefore possible that another population of sources is contributing to this effect.

MA130301GT catalogue of Martian impact craters and advanced evaluation of crater detection algorithms using diverse topography and image datasets

NASA Astrophysics Data System (ADS)

Salamunićcar, Goran; Lončarić, Sven; Pina, Pedro; Bandeira, Lourenço; Saraiva, José

2011-01-01

Recently, all the craters from the major currently available manually assembled catalogues have been merged into the catalogue with 57 633 known Martian impact craters (MA57633GT). In addition, the work on crater detection algorithm (CDA), developed to search for still uncatalogued impact craters using 1/128° MOLA data, resulted in MA115225GT. In parallel with this work another CDA has been developed which resulted in the Stepinski catalogue containing 75 919 craters (MA75919T). The new MA130301GT catalogue presented in this paper is the result of: (1) overall merger of MA115225GT and MA75919T; (2) 2042 additional craters found using Shen-Castan based CDA from the previous work and 1/128° MOLA data; and (3) 3129 additional craters found using CDA for optical images from the previous work and selected regions of 1/256° MDIM, 1/256° THEMIS-DIR, and 1/256° MOC datasets. All craters from MA130301GT are manually aligned with all used datasets. For all the craters that originate from the used catalogues (Barlow, Rodionova, Boyce, Kuzmin, Stepinski) we integrated all the attributes available in these catalogues. With such an approach MA130301GT provides everything that was included in these catalogues, plus: (1) the correlation between various morphological descriptors from used catalogues; (2) the correlation between manually assigned attributes and automated depth/diameter measurements from MA75919T and our CDA; (3) surface dating which has been improved in resolution globally; (4) average errors and their standard deviations for manually and automatically assigned attributes such as position coordinates, diameter, depth/diameter ratio, etc.; and (5) positional accuracy of features in the used datasets according to the defined coordinate system referred to as MDIM 2.1, which incorporates 1232 globally distributed ground control points, while our catalogue contains 130 301 cross-references between each of the used datasets. Global completeness of MA130301GT is up to ˜ D≥2 km (it contains 85 783 such craters, while the smallest D is 0.924 km). This is a considerable improvement in comparison with the completeness of the Rodionova (˜10 km), Barlow (˜5 km) and Stepinski (˜3 km) catalogues. An accompanying result to the new catalogue is a contribution to the evaluation of CDAs - the following methods have been developed: (1) a new context-aware method for the advanced automated registration of craters with GT catalogues; (2) a new method for manual registration of newly found craters into GT catalogues; and (3) additional new accompanying methods for objective evaluation of CDAs using different datasets including optical images.

ROOT — A C++ framework for petabyte data storage, statistical analysis and visualization

NASA Astrophysics Data System (ADS)

Antcheva, I.; Ballintijn, M.; Bellenot, B.; Biskup, M.; Brun, R.; Buncic, N.; Canal, Ph.; Casadei, D.; Couet, O.; Fine, V.; Franco, L.; Ganis, G.; Gheata, A.; Maline, D. Gonzalez; Goto, M.; Iwaszkiewicz, J.; Kreshuk, A.; Segura, D. Marcos; Maunder, R.; Moneta, L.; Naumann, A.; Offermann, E.; Onuchin, V.; Panacek, S.; Rademakers, F.; Russo, P.; Tadel, M.

2011-06-01

A new stable version ("production version") v5.28.00 of ROOT [1] has been published [2]. It features several major improvements in many areas, most noteworthy data storage performance as well as statistics and graphics features. Some of these improvements have already been predicted in the original publication Antcheva et al. (2009) [3]. This version will be maintained for at least 6 months; new minor revisions ("patch releases") will be published [4] to solve problems reported with this version. New version program summaryProgram title: ROOT Catalogue identifier: AEFA_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEFA_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU Lesser Public License v.2.1 No. of lines in distributed program, including test data, etc.: 2 934 693 No. of bytes in distributed program, including test data, etc.: 1009 Distribution format: tar.gz Programming language: C++ Computer: Intel i386, Intel x86-64, Motorola PPC, Sun Sparc, HP PA-RISC Operating system: GNU/Linux, Windows XP/Vista/7, Mac OS X, FreeBSD, OpenBSD, Solaris, HP-UX, AIX Has the code been vectorized or parallelized?: Yes RAM: > 55 Mbytes Classification: 4, 9, 11.9, 14 Catalogue identifier of previous version: AEFA_v1_0 Journal reference of previous version: Comput. Phys. Commun. 180 (2009) 2499 Does the new version supersede the previous version?: Yes Nature of problem: Storage, analysis and visualization of scientific data Solution method: Object store, wide range of analysis algorithms and visualization methods Reasons for new version: Added features and corrections of deficiencies Summary of revisions: The release notes at http://root.cern.ch/root/v528/Version528.news.html give a module-oriented overview of the changes in v5.28.00. Highlights include File format Reading of TTrees has been improved dramatically with respect to CPU time (30%) and notably with respect to disk space. Histograms A new TEfficiency class has been provided to handle the calculation of efficiencies and their uncertainties, TH2Poly for polygon-shaped bins (e.g. maps), TKDE for kernel density estimation, and TSVDUnfold for singular value decomposition. Graphics Kerning is now supported in TLatex, PostScript and PDF; a table of contents can be added to PDF files. A new font provides italic symbols. A TPad containing GL can be stored in a binary (i.e. non-vector) image file; add support for full-scene anti-aliasing. Usability enhancements to EVE. Math New interfaces for generating random number according to a given distribution, goodness of fit tests of unbinned data, binning multidimensional data, and several advanced statistical functions were added. RooFit Introduction of HistFactory; major additions to RooStats. TMVA Updated to version 4.1.0, adding e.g. the support for simultaneous classification of multiple output classes for several multivariate methods. PROOF Many new features, adding to PROOF's usability, plus improvements and fixes. PyROOT Support of Python 3 has been added. Tutorials Several new tutorials were provided for above new features (notably RooStats). A detailed list of all the changes is available at http://root.cern.ch/root/htmldoc/examples/V5. Additional comments: For an up-to-date author list see: http://root.cern.ch/drupal/content/root-development-team and http://root.cern.ch/drupal/content/former-root-developers. The distribution file for this program is over 30 Mbytes and therefore is not delivered directly when download or E-mail is requested. Instead a html file giving details of how the program can be obtained is sent. Running time: Depending on the data size and complexity of analysis algorithms. References: id="pr0100" view="all">http://root.cern.ch. http://root.cern.ch/drupal/content/production-version-528. I. Antcheva, M. Ballintijn, B. Bellenot, M. Biskup, R. Brun, N. Buncic, Ph. Canal, D. Casadei, O. Couet, V. Fine, L. Franco, G. Ganis, A. Gheata, D. Gonzalez Maline, M. Goto, J. Iwaszkiewicz, A. Kreshuk, D. Marcos Segura, R. Maunder, L. Moneta, A. Naumann, E. Offermann, V. Onuchin, S. Panacek, F. Rademakers, P. Russo, M. Tadel, ROOT — A C++ framework for petabyte data storage, statistical analysis and visualization, Comput. Phys. Commun. 180 (2009) 2499. http://root.cern.ch/drupal/content/root-version-v5-28-00-patch-release-notes.

VizieR Online Data Catalog: M67 variable stars from Kepler/K2-Campaign-5 (Gonzalez, 2016)

NASA Astrophysics Data System (ADS)

Gonzalez, G.

2017-06-01

M 67 was observed continuously between 2015 April 27 and July 10 during the Kepler/K2-Campaign-5 (hereafter, 'Campaign-5 field'). It includes 28 850 long-cadence, 204 short-cadence, and several other special targets. Several data products for the Campaign-5 field were released to the public on the NASA Barbara A. Mikulski Archive for Space Telescopes (MAST) website on 2015 October 30 (https://archive.stsci.edu/k2/). We downloaded tar files containing all the long-cadence light-curve (CLC) files of the Campaign-5 targets from the MAST archive. In addition, we downloaded the comprehensive K2 input catalogue (EPIC) for the Campaign-5 field. We supplemented the NASA K2 data with ground-based data, of which Nardiello et al. (2016, Cat. J/MNRAS/455/2337) is our primary source. Nardiello et al. (2016, Cat. J/MNRAS/455/2337) list the positions and white-light magnitudes for 6905 objects in the M 67 field, but they only list BVRI magnitudes, proper motions and membership probabilities for a subset of this large sample. Cross-referencing (using coordinates) the Campaign-5 input catalogue with the Nardiello et al. (2016, Cat. J/MNRAS/455/2337) catalogue resulted in 3201 matches. Of these, 639 have light curves available in the MAST Campaign-5 archive. This will be the working sample. (1 data file).

The ESA Gaia Archive: Data Release 1

NASA Astrophysics Data System (ADS)

Salgado, J.; González-Núñez, J.; Gutiérrez-Sánchez, R.; Segovia, J. C.; Durán, J.; Hernández, J. L.; Arviset, C.

2017-10-01

The ESA Gaia mission is producing the most accurate source catalogue in astronomy to date. This represents a challenge in archiving to make the information and data accessible to astronomers in an efficient way, due to the size and complexity of the data. Also, new astronomical missions, taking larger and larger volumes of data, are reinforcing this change in the development of archives. Archives, as simple applications to access data, are evolving into complex data centre structures where computing power services are available for users and data mining tools are integrated into the server side. In the case of astronomy missions that involve the use of large catalogues, such as Gaia (or Euclid to come), the common ways to work on the data need to be changed to the following paradigm: "move the code close to the data". This implies that data mining functionalities are becoming a must to allow for the maximum scientific exploitation of the data. To enable these capabilities, a TAP+ interface, crossmatch capabilities, full catalogue histograms, serialisation of intermediate results in cloud resources, such as VOSpace etc., have been implemented for the Gaia Data Release 1 (DR1), to enable the exploitation of these science resources by the community without any bottlenecks in the connection bandwidth. We present the architecture, infrastructure and tools already available in the Gaia Archive DR1 (http://archives.esac.esa.int/gaia/) and we describe the capabilities and infrastructure.

ICE-COLA: fast simulations for weak lensing observables

NASA Astrophysics Data System (ADS)

Izard, Albert; Fosalba, Pablo; Crocce, Martin

2018-01-01

Approximate methods to full N-body simulations provide a fast and accurate solution to the development of mock catalogues for the modelling of galaxy clustering observables. In this paper we extend ICE-COLA, based on an optimized implementation of the approximate COLA method, to produce weak lensing maps and halo catalogues in the light-cone using an integrated and self-consistent approach. We show that despite the approximate dynamics, the catalogues thus produced enable an accurate modelling of weak lensing observables one decade beyond the characteristic scale where the growth becomes non-linear. In particular, we compare ICE-COLA to the MICE Grand Challenge N-body simulation for some fiducial cases representative of upcoming surveys and find that, for sources at redshift z = 1, their convergence power spectra agree to within 1 per cent up to high multipoles (i.e. of order 1000). The corresponding shear two point functions, ξ+ and ξ-, yield similar accuracy down to 2 and 20 arcmin respectively, while tangential shear around a z = 0.5 lens sample is accurate down to 4 arcmin. We show that such accuracy is stable against an increased angular resolution of the weak lensing maps. Hence, this opens the possibility of using approximate methods for the joint modelling of galaxy clustering and weak lensing observables and their covariance in ongoing and future galaxy surveys.

Robust covariance estimation of galaxy-galaxy weak lensing: validation and limitation of jackknife covariance

NASA Astrophysics Data System (ADS)

Shirasaki, Masato; Takada, Masahiro; Miyatake, Hironao; Takahashi, Ryuichi; Hamana, Takashi; Nishimichi, Takahiro; Murata, Ryoma

2017-09-01

We develop a method to simulate galaxy-galaxy weak lensing by utilizing all-sky, light-cone simulations and their inherent halo catalogues. Using the mock catalogue to study the error covariance matrix of galaxy-galaxy weak lensing, we compare the full covariance with the 'jackknife' (JK) covariance, the method often used in the literature that estimates the covariance from the resamples of the data itself. We show that there exists the variation of JK covariance over realizations of mock lensing measurements, while the average JK covariance over mocks can give a reasonably accurate estimation of the true covariance up to separations comparable with the size of JK subregion. The scatter in JK covariances is found to be ∼10 per cent after we subtract the lensing measurement around random points. However, the JK method tends to underestimate the covariance at the larger separations, more increasingly for a survey with a higher number density of source galaxies. We apply our method to the Sloan Digital Sky Survey (SDSS) data, and show that the 48 mock SDSS catalogues nicely reproduce the signals and the JK covariance measured from the real data. We then argue that the use of the accurate covariance, compared to the JK covariance, allows us to use the lensing signals at large scales beyond a size of the JK subregion, which contains cleaner cosmological information in the linear regime.

Estimation of Source Parameters of Historical Major Earthquakes from 1900 to 1970 around Asia and Analysis of Their Uncertainties

NASA Astrophysics Data System (ADS)

Han, J.; Zhou, S.

2017-12-01

Asia, located in the conjoined areas of Eurasian, Pacific, and Indo-Australian plates, is the continent with highest seismicity. Earthquake catalogue on the bases of modern seismic network recordings has been established since around 1970 in Asia and the earthquake catalogue before 1970 was much more inaccurate because of few stations. With a history of less than 50 years of modern earthquake catalogue, researches in seismology are quite limited. After the appearance of improved Earth velocity structure model, modified locating method and high-accuracy Optical Character Recognition technique, travel time data of earthquakes from 1900 to 1970 can be included in research and more accurate locations can be determined for historical earthquakes. Hence, parameters of these historical earthquakes can be obtained more precisely and some research method such as ETAS model can be used in a much longer time scale. This work focuses on the following three aspects: (1) Relocating more than 300 historical major earthquakes (M≥7.0) in Asia based on the Shide Circulars, International Seismological Summary and EHB Bulletin instrumental records between 1900 and 1970. (2) Calculating the focal mechanisms of more than 50 events by first motion records of P wave of ISS. (3) Based on the geological data, tectonic stress field and the result of relocation, inferring focal mechanisms of historical major earthquakes.

Book reviews - Catalogue of Meteorites, 5th ed., revised and enlarged, by Monica M. Grady. Cambridge University Press, 2000, 689 pp., US $150.00 (ISBN 0521-66303-2)

NASA Astrophysics Data System (ADS)

Ivanova, Marina A.

2002-02-01

The Catalogue of Meteorites has a long tradition and is one of the most important reference publications for meteorite researchers and cosmochemists. The first Guide to the Catalogue of Meteorites was published in 1881 by Lazarus Fletcher, Keeper of Minerals at the British Museum (Natural History), and contained a description of the nature of meteorites and a list of the 361 samples then in the museum's collection. Over the past century, this list was expanded to include more than just the meteorites that were in the possession of the British Museum; an attempt was made to include names, location, and other information on all meteorites known at the time. Thus, the first Catalogue of Meteorites was published in 1923 by G. T. Prior. His successor at the British Museum was Max H. Hey, who published appendixes to Prior's Catalogue, as well as the second and third editions of the Catalogue of Meteoritesin 1953 and 1966. An appendix to the third edition was published in 1977. Traditionally, the Catalogue contained a listing of all the specimens in any of the world's meteorite collections, in museums or otherwise. With the discovery of large numbers of meteorites in Antarctica, starting in 1969, the publishers of the Catalogue encountered some problems, as hundreds-even thousands-of specimens, many of which may be paired, were brought back from Antarctica from the 1970s onward. The fourth edition of the Catalogue, published in 1985 by Andrew Graham, Alex Bevan, and Robert Hutchison, was the first to deal with this sudden inflation of the number of meteorites. Because most of the thousands of Antarctic meteorites (except the obviously more unusual types, such as irons and certain achondrites) had not been studied in any detail, the fourth edition of the Catalogue wisely limited the entries of these meteorites (in some cases, only those with masses larger than 500 g were included in the Catalogue). The fourth edition of the Catalogue was a handsome and handy reference book that provided a quick introduction and a wealth of information (or, often, the only information) on a large number of meteorites.

Helios-2 Vela-Ariel-5 gamma-ray burst source position

NASA Technical Reports Server (NTRS)

Cline, T. L.; Trainor, J. H.; Desai, U. D.; Klebesadel, R. W.; Ricketts, M.; Heluken, H.

1979-01-01

The gamma-ray burst of 28 January 1976, one of 18 events thus far detected in interplanetary space with Helios-2, was also observed with the Vela-5A, -6A and the Ariel-5 satellites. A small source field is obtained from the intersection of the region derived from the observed time delays between Helios-2 and Vela-5A and -6A with the source region independently found with the Ariel-5 X-ray detector. This area contains neither any steady X-ray source as scanned by HEAO-A nor any previously catalogued X-ray, radio or infrared sources, X-ray transients, quasars, seyferts, globular clusters, flare stars, pulsars, white dwarfs or high energy gamma-ray sources. The region is however, within the source field of a gamma-ray transient observed in 1974, which exhibited nuclear gamma-ray line structure.

QuTiP: An open-source Python framework for the dynamics of open quantum systems

NASA Astrophysics Data System (ADS)

Johansson, J. R.; Nation, P. D.; Nori, Franco

2012-08-01

We present an object-oriented open-source framework for solving the dynamics of open quantum systems written in Python. Arbitrary Hamiltonians, including time-dependent systems, may be built up from operators and states defined by a quantum object class, and then passed on to a choice of master equation or Monte Carlo solvers. We give an overview of the basic structure for the framework before detailing the numerical simulation of open system dynamics. Several examples are given to illustrate the build up to a complete calculation. Finally, we measure the performance of our library against that of current implementations. The framework described here is particularly well suited to the fields of quantum optics, superconducting circuit devices, nanomechanics, and trapped ions, while also being ideal for use in classroom instruction. Catalogue identifier: AEMB_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEMB_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 16 482 No. of bytes in distributed program, including test data, etc.: 213 438 Distribution format: tar.gz Programming language: Python Computer: i386, x86-64 Operating system: Linux, Mac OSX, Windows RAM: 2+ Gigabytes Classification: 7 External routines: NumPy (http://numpy.scipy.org/), SciPy (http://www.scipy.org/), Matplotlib (http://matplotlib.sourceforge.net/) Nature of problem: Dynamics of open quantum systems. Solution method: Numerical solutions to Lindblad master equation or Monte Carlo wave function method. Restrictions: Problems must meet the criteria for using the master equation in Lindblad form. Running time: A few seconds up to several tens of minutes, depending on size of underlying Hilbert space.

Seismic sample areas defined from incomplete catalogues: an application to the Italian territory

NASA Astrophysics Data System (ADS)

Mulargia, F.; Tinti, S.

1985-11-01

The comprehensive understanding of earthquake source-physics under real conditions requires the study not of single faults as separate entities but rather of a seismically active region as a whole, accounting for the interaction among different structures. We define "seismic sample area" the most convenient region to be used as a natural laboratory for the study of seismic source physics. This coincides with the region where the average large magnitude seismicity is the highest. To this end, time and space future distributions of large earthquakes are to be estimated. Using catalog seismicity as an input, the rate of occurrence is not constant but appears generally biased by incompleteness in some parts of the catalog and possible nonstationarities in seismic activity. We present a statistical procedure which is capable, under a few mild assumptions, of both detecting nonstationarities in seismicity and finding the incomplete parts of a seismic catalog. The procedure is based on Kolmogorov-Smirnov nonparametric statistics, and can be applied without a priori assuming the parent distribution of the events. The efficiency of this procedure allows the analysis of small data sets. An application to the Italian territory is presented, using the most recent version of the ENEL seismic catalog. Seismic activity takes place in six well defined areas but only five of them have a number of events sufficient for analysis. Barring a few exceptions, seismicity is found stationary throughout the whole catalog span 1000-1980. The eastern Alps region stands out as the best "sample area", with the highest average probability of event occurrence per time and area unit. Final objective of this characterization is to stimulate a program of intensified research.

Broad Absorption Line Quasar catalogues with Supervised Neural Networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scaringi, Simone; Knigge, Christian; Cottis, Christopher E.

2008-12-05

We have applied a Learning Vector Quantization (LVQ) algorithm to SDSS DR5 quasar spectra in order to create a large catalogue of broad absorption line quasars (BALQSOs). We first discuss the problems with BALQSO catalogues constructed using the conventional balnicity and/or absorption indices (BI and AI), and then describe the supervised LVQ network we have trained to recognise BALQSOs. The resulting BALQSO catalogue should be substantially more robust and complete than BI-or AI-based ones.

VizieR Online Data Catalog: SWASP catalogue of RR Lyrae stars (Greer+, 2017)

NASA Astrophysics Data System (ADS)

Greer, P. A.; Payne, S. G.; Norton, A. J.; Maxted, P. F. L.; Smalley, B.; West, P. J.; Wheatley, R. G.; Kolb, U. C.

2017-07-01

The SuperWASP RR Lyrae catalogue contains 4963 RRab type RR Lyrae objects from the SuperWASP archive. Each entry includes the unique SWASP identifier, pulsation period in days, pulsation amplitude in mags, median light curve amplitude in mags, the corresponding GCVS name, and corresponding SSS/CRTS names, where known. The SWASP blazhko candidate catalogue contains 1324 rows of Blazhko periods for 983 unique objects from the SWASP RRab catalogue. (2 data files).

The nature of fifty Palermo Swift-BAT hard X-ray objects through optical spectroscopy

NASA Astrophysics Data System (ADS)

Rojas, A. F.; Masetti, N.; Minniti, D.; Jiménez-Bailón, E.; Chavushyan, V.; Hau, G.; McBride, V. A.; Bassani, L.; Bazzano, A.; Bird, A. J.; Galaz, G.; Gavignaud, I.; Landi, R.; Malizia, A.; Morelli, L.; Palazzi, E.; Patiño-álvarez, V.; Stephen, J. B.; Ubertini, P.

2017-07-01

We present the nature of 50 unidentified hard X-ray emitting objects detected with Swift-BAT and listed as of unidentified nature in the 54-month Palermo BAT catalogue. We found 45 extragalactic sources: 26 type 1 AGN, 15 type 2 AGN, one type 1 QSO, one starburst galaxy, one X-ray bright optically normal galaxy, and one LINER. We report 30 new redshift measurements, 13 confirmations and 2 more accurate redshift values. The remaining five objects are galactic sources: three are Cataclismic Variables, one is a X-ray Binary, and one is an active star.

VizieR Online Data Catalog: Milky Way global survey of star clusters. III. (Schmeja+, 2014)

NASA Astrophysics Data System (ADS)

Schmeja, S.; Kharchenko, N. V.; Piskunov, A. E.; Roeser, S.; Schilbach, E.; Froebrich, D.; Scholz, R.-D.

2014-06-01

We were looking for stellar density enhancements using a star count algorithm in the 2MASS point source catalogue (II/246). In total we discovered 714 density enhancements (regarded as cluster candidates). The candidates were cross-identified with known objects. Unidentified objects were passed through the standard MWSC pipeline for verification, cluster membership construction and structure, kinematic and astrophysical parameter determination. The basic stellar data were taken from the all-sky catalogue 2MAst (2MASS with Astrometry), that was extracted from the all-sky catalogues PPMXL (Roeser et al. 2010, Cat. I/317) and 2MASS (Cutri et al. 2003, Cat. II/246). We found that 359 candidates coincide with known objects, other 355 candidates are non identified, and 139 of them we classified as real star clusters and determined their basic cluster parameters. Around each confirmed object from our target list we defined a circular area with a radius of ra=r2+radd where r2 is initial estimate of cluster radius, and radd=0.3°. In these areas we selected in 2MAst only those stars with flags Rflg (the 2nd triple of the flags in 2MASS) set to 1, 2, or 3 in each band, i.e. the stars with the best quality detections in photometric and astrometric data. The 139 sky areas with confirmed clusters contain about 0.52 mln 2MAst stars with best quality detections in photometric and astrometric data. We selected most probable members and determined - with a homogeneous method/pipeline - angular sizes of the main morphological parts, heliocentric distances, colour-excesses, mean proper motions, ages, tidal parameters. This work extends MWSC project having input list of 3784 targets by 714 new candidates. We have adopted for them that MWSC numbering starts with 5001. Since the search was performed for Northern and Southern hemispheres separately the candidate numbering is discontinuous: the numbers 5001<=MWSC<5499 are assigned at b>18.5, and 5500<=MWSC<5999 designate candidates at b<-18.5. We present: The Catalogue of new MWSC open clusters found at high galactic latitudes (|b|>18.5°) which includes several files: Catalogue of cluster parameters (confirmed clusters only); Index of all MWSC(|b|>18.5 deg) candidates; Notes for every item of index list. Within each list the entries are ordered along with MWSC number. The Catalogues of the MWSC Stars in 139 circular sky areas with confirmed clusters. Files are ordered by MWSC number; inside each sky area the entries are ordered by Ks magnitudes. The Atlas of new MWSC clusters diagrams. In the Atlas the Cluster pages are ordered by MWSC number. All the data are given in the same format as in the main MWSC catalogue (Cat. J/A+A/558/A53). (5 data files).

Machine learning in infrared object classification - an all-sky selection of YSO candidates

NASA Astrophysics Data System (ADS)

Marton, Gabor; Zahorecz, Sarolta; Toth, L. Viktor; Magnus McGehee, Peregrine; Kun, Maria

2015-08-01

Object classification is a fundamental and challenging problem in the era of big data. I will discuss up-to-date methods and their application to classify infrared point sources.We analysed the ALLWISE catalogue, the most recent public source catalogue of the Wide-field Infrared Survey Explorer (WISE) to compile a reliable list of Young Stellar Object (YSO) candidates. We tested and compared classical and up-to-date statistical methods as well, to discriminate source types like extragalactic objects, evolved stars, main sequence stars, objects related to the interstellar medium and YSO candidates by using their mid-IR WISE properties and associated near-IR 2MASS data.In the particular classification problem the Support Vector Machines (SVM), a class of supervised learning algorithm turned out to be the best tool. As a result we classify Class I and II YSOs with >90% accuracy while the fraction of contaminating extragalactic objects remains well below 1%, based on the number of known objects listed in the SIMBAD and VizieR databases. We compare our results to other classification schemes from the literature and show that the SVM outperforms methods that apply linear cuts on the colour-colour and colour-magnitude space. Our homogenous YSO candidate catalog can serve as an excellent pathfinder for future detailed observations of individual objects and a starting point of statistical studies that aim to add pieces to the big picture of star formation theory.

Consolidating WLCG topology and configuration in the Computing Resource Information Catalogue

DOE PAGES

Alandes, Maria; Andreeva, Julia; Anisenkov, Alexey; ...

2017-10-01

Here, the Worldwide LHC Computing Grid infrastructure links about 200 participating computing centres affiliated with several partner projects. It is built by integrating heterogeneous computer and storage resources in diverse data centres all over the world and provides CPU and storage capacity to the LHC experiments to perform data processing and physics analysis. In order to be used by the experiments, these distributed resources should be well described, which implies easy service discovery and detailed description of service configuration. Currently this information is scattered over multiple generic information sources like GOCDB, OIM, BDII and experiment-specific information systems. Such a modelmore » does not allow to validate topology and configuration information easily. Moreover, information in various sources is not always consistent. Finally, the evolution of computing technologies introduces new challenges. Experiments are more and more relying on opportunistic resources, which by their nature are more dynamic and should also be well described in the WLCG information system. This contribution describes the new WLCG configuration service CRIC (Computing Resource Information Catalogue) which collects information from various information providers, performs validation and provides a consistent set of UIs and APIs to the LHC VOs for service discovery and usage configuration. The main requirements for CRIC are simplicity, agility and robustness. CRIC should be able to be quickly adapted to new types of computing resources, new information sources, and allow for new data structures to be implemented easily following the evolution of the computing models and operations of the experiments.« less

Consolidating WLCG topology and configuration in the Computing Resource Information Catalogue

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alandes, Maria; Andreeva, Julia; Anisenkov, Alexey

Here, the Worldwide LHC Computing Grid infrastructure links about 200 participating computing centres affiliated with several partner projects. It is built by integrating heterogeneous computer and storage resources in diverse data centres all over the world and provides CPU and storage capacity to the LHC experiments to perform data processing and physics analysis. In order to be used by the experiments, these distributed resources should be well described, which implies easy service discovery and detailed description of service configuration. Currently this information is scattered over multiple generic information sources like GOCDB, OIM, BDII and experiment-specific information systems. Such a modelmore » does not allow to validate topology and configuration information easily. Moreover, information in various sources is not always consistent. Finally, the evolution of computing technologies introduces new challenges. Experiments are more and more relying on opportunistic resources, which by their nature are more dynamic and should also be well described in the WLCG information system. This contribution describes the new WLCG configuration service CRIC (Computing Resource Information Catalogue) which collects information from various information providers, performs validation and provides a consistent set of UIs and APIs to the LHC VOs for service discovery and usage configuration. The main requirements for CRIC are simplicity, agility and robustness. CRIC should be able to be quickly adapted to new types of computing resources, new information sources, and allow for new data structures to be implemented easily following the evolution of the computing models and operations of the experiments.« less

Consolidating WLCG topology and configuration in the Computing Resource Information Catalogue

NASA Astrophysics Data System (ADS)

Alandes, Maria; Andreeva, Julia; Anisenkov, Alexey; Bagliesi, Giuseppe; Belforte, Stephano; Campana, Simone; Dimou, Maria; Flix, Jose; Forti, Alessandra; di Girolamo, A.; Karavakis, Edward; Lammel, Stephan; Litmaath, Maarten; Sciaba, Andrea; Valassi, Andrea

2017-10-01

The Worldwide LHC Computing Grid infrastructure links about 200 participating computing centres affiliated with several partner projects. It is built by integrating heterogeneous computer and storage resources in diverse data centres all over the world and provides CPU and storage capacity to the LHC experiments to perform data processing and physics analysis. In order to be used by the experiments, these distributed resources should be well described, which implies easy service discovery and detailed description of service configuration. Currently this information is scattered over multiple generic information sources like GOCDB, OIM, BDII and experiment-specific information systems. Such a model does not allow to validate topology and configuration information easily. Moreover, information in various sources is not always consistent. Finally, the evolution of computing technologies introduces new challenges. Experiments are more and more relying on opportunistic resources, which by their nature are more dynamic and should also be well described in the WLCG information system. This contribution describes the new WLCG configuration service CRIC (Computing Resource Information Catalogue) which collects information from various information providers, performs validation and provides a consistent set of UIs and APIs to the LHC VOs for service discovery and usage configuration. The main requirements for CRIC are simplicity, agility and robustness. CRIC should be able to be quickly adapted to new types of computing resources, new information sources, and allow for new data structures to be implemented easily following the evolution of the computing models and operations of the experiments.

AstroDAbis: Annotations and Cross-Matches for Remote Catalogues

NASA Astrophysics Data System (ADS)

Gray, N.; Mann, R. G.; Morris, D.; Holliman, M.; Noddle, K.

2012-09-01

Astronomers are good at sharing data, but poorer at sharing knowledge. Almost all astronomical data ends up in open archives, and access to these is being simplified by the development of the global Virtual Observatory (VO). This is a great advance, but the fundamental problem remains that these archives contain only basic observational data, whereas all the astrophysical interpretation of that data — which source is a quasar, which a low-mass star, and which an image artefact — is contained in journal papers, with very little linkage back from the literature to the original data archives. It is therefore currently impossible for an astronomer to pose a query like “give me all sources in this data archive that have been identified as quasars” and this limits the effective exploitation of these archives, as the user of an archive has no direct means of taking advantage of the knowledge derived by its previous users. The AstroDAbis service aims to address this, in a prototype service enabling astronomers to record annotations and cross-identifications in the AstroDAbis service, annotating objects in other catalogues. We have deployed two interfaces to the annotations, namely one astronomy-specific one using the TAP protocol (Dowler et al. 2011), and a second exploiting generic Linked Open Data (LOD) and RDF techniques.

Earthquake Occurrence in Bangladesh and Surrounding Region

NASA Astrophysics Data System (ADS)

Al-Hussaini, T. M.; Al-Noman, M.

2011-12-01

The collision of the northward moving Indian plate with the Eurasian plate is the cause of frequent earthquakes in the region comprising Bangladesh and neighbouring India, Nepal and Myanmar. Historical records indicate that Bangladesh has been affected by five major earthquakes of magnitude greater than 7.0 (Richter scale) during 1869 to 1930. This paper presents some statistical observations of earthquake occurrence in fulfilment of a basic groundwork for seismic hazard assessment of this region. An up to date catalogue covering earthquake information in the region bounded within 17°-30°N and 84°-97°E for the period of historical period to 2010 is derived from various reputed international sources including ISC, IRIS, Indian sources and available publications. Careful scrutiny is done to remove duplicate or uncertain earthquake events. Earthquake magnitudes in the range of 1.8 to 8.1 have been obtained and relationships between different magnitude scales have been studied. Aftershocks are removed from the catalogue using magnitude dependent space window and time window. The main shock data are then analyzed to obtain completeness period for different magnitudes evaluating their temporal homogeneity. Spatial and temporal distribution of earthquakes, magnitude-depth histograms and other statistical analysis are performed to understand the distribution of seismic activity in this region.

[National Conference on Cataloguing Standards (Ottawa, May 19-20, 1970].

ERIC Educational Resources Information Center

National Library of Canada, Ottawa (Ontario).

The following papers were presented at an invitational conference on cataloging standards: (1) "Canadiana Meets Automation;" (2) "The Union Catalogues in the National Library - The Present Condition;" (3) "A Centralized Bibliographic Data Bank;" (4) "The Standardization of Cataloguing;" (5) "The…

CIF2Cell: Generating geometries for electronic structure programs

NASA Astrophysics Data System (ADS)

Björkman, Torbjörn

2011-05-01

The CIF2Cell program generates the geometrical setup for a number of electronic structure programs based on the crystallographic information in a Crystallographic Information Framework (CIF) file. The program will retrieve the space group number, Wyckoff positions and crystallographic parameters, make a sensible choice for Bravais lattice vectors (primitive or principal cell) and generate all atomic positions. Supercells can be generated and alloys are handled gracefully. The code currently has output interfaces to the electronic structure programs ABINIT, CASTEP, CPMD, Crystal, Elk, Exciting, EMTO, Fleur, RSPt, Siesta and VASP. Program summaryProgram title: CIF2Cell Catalogue identifier: AEIM_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEIM_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU GPL version 3 No. of lines in distributed program, including test data, etc.: 12 691 No. of bytes in distributed program, including test data, etc.: 74 933 Distribution format: tar.gz Programming language: Python (versions 2.4-2.7) Computer: Any computer that can run Python (versions 2.4-2.7) Operating system: Any operating system that can run Python (versions 2.4-2.7) Classification: 7.3, 7.8, 8 External routines: PyCIFRW [1] Nature of problem: Generate the geometrical setup of a crystallographic cell for a variety of electronic structure programs from data contained in a CIF file. Solution method: The CIF file is parsed using routines contained in the library PyCIFRW [1], and crystallographic as well as bibliographic information is extracted. The program then generates the principal cell from symmetry information, crystal parameters, space group number and Wyckoff sites. Reduction to a primitive cell is then performed, and the resulting cell is output to suitably named files along with documentation of the information source generated from any bibliographic information contained in the CIF file. If the space group symmetries is not present in the CIF file the program will fall back on internal tables, so only the minimal input of space group, crystal parameters and Wyckoff positions are required. Additional key features are handling of alloys and supercell generation. Additional comments: Currently implements support for the following general purpose electronic structure programs: ABINIT [2,3], CASTEP [4], CPMD [5], Crystal [6], Elk [7], exciting [8], EMTO [9], Fleur [10], RSPt [11], Siesta [12] and VASP [13-16]. Running time: The examples provided in the distribution take only seconds to run.

THERMINATOR 2: THERMal heavy Io N gener ATOR 2

NASA Astrophysics Data System (ADS)

Chojnacki, Mikołaj; Kisiel, Adam; Florkowski, Wojciech; Broniowski, Wojciech

2012-03-01

We present an extended version of THERMINATOR, a Monte Carlo event generator dedicated to studies of the statistical production of particles in relativistic heavy-ion collisions. The package is written in C++ and uses the CERN ROOT data-analysis environment. The largely increased functionality of the code contains the following main features: 1) The possibility of input of any shape of the freeze-out hypersurface and the expansion velocity field, including the 3+1-dimensional profiles, in particular those generated externally with various hydrodynamic codes. 2) The hypersurfaces may have variable thermal parameters, which allow studies departing significantly from the mid-rapidity region where the baryon chemical potential becomes large. 3) We include a library of standard sets of hypersurfaces and velocity profiles describing the RHIC Au + Au data at √{s}=200 GeV for various centralities, as well as those anticipated for the LHC Pb + Pb collisions at √{s}=5.5 TeV. 4) A separate code, FEMTO-THERMINATOR, is provided to carry out the analysis of the pion-pion femtoscopic correlations which are an important source of information concerning the size and expansion of the system. 5) We also include several useful scripts that carry out auxiliary tasks, such as obtaining an estimate of the number of elastic collisions after the freeze-out, counting of particles flowing back into the fireball and violating causality (typically very few), or visualizing various results: the particle p-spectra, the elliptic flow coefficients, and the HBT correlation radii. Program summaryProgram title:THERMINATOR 2 Catalogue identifier: ADXL_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADXL_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 423 444 No. of bytes in distributed program, including test data, etc.: 2 854 602 Distribution format: tar.gz Programming language:C++ with the CERN ROOT libraries, BASH shell Computer: Any with a C++ compiler and the CERN ROOT environment, ver. 5.26 or later, tested with Intel Core2 Duo CPU E8400 @ 3 GHz, 4 GB RAM Operating system: Linux Ubuntu 10.10 x64 (gcc 4.4.5) ROOT 5.26 Linux Ubuntu 11.04 x64 (gcc Ubuntu/Linaro 4.5.2-8ubuntu4) ROOT 5.30/00 (compiled from source) Linux CentOS 5.2 (gcc Red Hat 4.1.2-42) ROOT 5.30/00 (compiled from source) Mac OS X 10.6.8 (i686-apple-darwin10-g++-4.2.1) ROOT 5.30/00 (for Mac OS X 10.6 x86-64 with gcc 4.2.1) cygwin-1.7.9-1 (gcc gcc4-g++-4.3.4-4) ROOT 5.30/00 (for cygwin gcc 4.3) RAM: 30 MB therm2 events 150 MB therm2 femto Classification: 11.2 Catalogue identifier of previous version: ADXL_v1_0 Journal reference of previous version: Comput. Phys. Comm. 174 (2006) 669 External routines: CERN ROOT ( http://root.cern.ch/drupal/) Does the new version supersede the previous version?: Yes Nature of problem: Particle production via statistical hadronization in relativistic heavy-ion collisions. Solution method: Monte Carlo simulation, analyzed with ROOT. Reasons for new version: The increased functionality of the code contains the following important features. The input of any shape of the freeze-out hypersurface and the expansion velocity field, including the 3+1-dimensional profiles, in particular those generated externally with the various popular hydrodynamic codes. The hypersurfaces may have variable thermal parameters, which allows for studies departing significantly from the mid-rapidity region. We include a library of standard sets of hypersurfaces and velocity profiles describing the RHIC Au + Au and the LHC Pb+Pb data. A separate code, FEMTO-THERMINATOR, is provided to carry out the analysis of femtoscopic correlations. Summary of revisions: THERMINATOR 2 incorporates major revisions to encompass the enhanced functionality. Classes: The Integrator class has been expanded and a new subgroup of classes defined. Model and abstract class: These classes are responsible for the physical models of the freeze-out process. The functionality and readability of the code has been substantially increased by implementing each freeze-out model in a different class. The Hypersurface class was added to handle the input form hydrodynamic codes. The hydro input is passed to the program as a lattice of the freeze-out hypersurface. That information is stored in the .xml files. Input: THERMINATOR 2 programs are now controlled by *. ini type files. The programs parameters and the freeze-out model parameters are now in separate ini files. Output: The event files generated by the therm2_events program are not backward compatible with the previous version. The event*. root file structure was expanded with two new TTree structures. From the particle entry it is possible to back-trace the whole cascade. Event text output is now optional. The ROOT macros produce the *. eps figures with physics results, e.g. the pT-spectra, the elliptic-flow coefficient, rapidity distributions, etc. The THERMINATOR HBT package creates the ROOT files femto*. root ( therm2_femto) and hbtfit*. root ( therm2_hbtfit). Directory structure: The directory structure has been reorganized. Source code resides in the build directory. The freeze-out model input files, event files, ROOT macros are stored separately. The THERMINATOR 2 system, after installation, is able to run on a cluster. Scripts: The package contains a few BASH scripts helpful when running e.g. on a cluster the whole system can be executed via a single script. Additional comments: Typical data file size: default configuration. 45 MB/500 events; 35 MB/correlation file (one k bin); 45 kB/fit file (projections and fits). Running time: Default configuration at 3 GHz. primordial multiplicities 70 min (calculated only once per case); 8 min/500 events; 10 min - draw all figures; 25 min/one k bin in the HBT analysis with 5000 events.

Fast and accurate mock catalogue generation for low-mass galaxies

NASA Astrophysics Data System (ADS)

Koda, Jun; Blake, Chris; Beutler, Florian; Kazin, Eyal; Marin, Felipe

2016-06-01

We present an accurate and fast framework for generating mock catalogues including low-mass haloes, based on an implementation of the COmoving Lagrangian Acceleration (COLA) technique. Multiple realisations of mock catalogues are crucial for analyses of large-scale structure, but conventional N-body simulations are too computationally expensive for the production of thousands of realizations. We show that COLA simulations can produce accurate mock catalogues with a moderate computation resource for low- to intermediate-mass galaxies in 1012 M⊙ haloes, both in real and redshift space. COLA simulations have accurate peculiar velocities, without systematic errors in the velocity power spectra for k ≤ 0.15 h Mpc-1, and with only 3-per cent error for k ≤ 0.2 h Mpc-1. We use COLA with 10 time steps and a Halo Occupation Distribution to produce 600 mock galaxy catalogues of the WiggleZ Dark Energy Survey. Our parallelized code for efficient generation of accurate halo catalogues is publicly available at github.com/junkoda/cola_halo.

VizieR Online Data Catalog: Bidelman-Parsons Spectroscopic/Bibliographic Cat (Parsons+ 1980)

NASA Astrophysics Data System (ADS)

Parsons, S. B.; Buta, N. S.; Bidelman, W. P.

1996-11-01

The Bidelman-Parsons Spectroscopic and Bibliographical Catalog (BPSB; Parsons, Buta, and Bidelman 1980a, b) contains data compiled from the astronomical literature by W. P. Bidelman. These data include diverse catalogs and lists, especially from pre-1950 journals (minor as well as major), and from pre-1962 observatory publications. From more recent years, the data on any object frequently are limited to one item with a reference; for example, a spectral type. No data published after 1973 are included. Over 200 publications are represented. The BPSB has information on 40,312 objects. The catalog contains most of the same information on MK spectral types as the Catalogue of Stellar Spectra Classified in the Morgan-Keenan System (Jaschek, Conde, and de Sierra 1964) and its updates, but it also includes such items as spectral types without a luminosity class (certainly better than nothing); spectroscopic absolute magnitudes; notes on multiplicity; notes on high proper motion or radial velocity (with the values, if probably variable, or if greater than 60 km/s); unpublished remarks and spectral types from several sources, including Bidelman and Henize; and Bidelman's preliminary identifications of many sources in the Two-Micron Sky Survey (Neugebauer and Leighton 1969). Some of the longer lists included in the catalog are those of OB stars from the Tonantzintla-Tacubaya and Heidelberg-Koenigstuhl surveys (Iriarte and Chavira 1957; Chavira 1958; Klare and Szeidl 1966); that of OB stars with emission from the Case-Hamburg surveys (Hardorp et al. 1959; Stock, Nassau, and Stephenson 1960; Hardorp, Theile, and Voigt 1964; Nassau and Stephenson 1963; Hardorp, Theile, and Voigt 1965; Nassau, Stephenson, and MacConnell 1965; Stephenson and Sanduleak 1971); and stars from the General Catalogue of Variable Stars (Kukarkin et al. 1969); and the Catalogue of Suspected Variable Stars (Kukarkin et al. 1951, 1965). Although the catalog is mainly of stellar data, it includes many galactic nebulae of various kinds. (3 data files).

A Spatially and Temporally Continuous LFE Catalogue for the Southern Alps, New Zealand

NASA Astrophysics Data System (ADS)

Chamberlain, C. J.; Townend, J.; Baratin, L. M.

2015-12-01

Using a brightness-based beamforming approach coupled with a matched-filter correlation method, we have developed a 6.5 year record of low-frequency earthquakes (LFEs) occuring on and near the deep extent of New Zealand's Alpine Fault. Our brightness template detection method, based on that of Frank et al. (2014), scans a pre-determined grid of possible seismic sources to automatically find LFE templates based on the stack of bandpassed squared seismic data. Previous work (Wech et al., 2012, Chamberlain et al., 2014) has shown that the depths of standard seismicity are anti-correlated with those of tremor and LFEs in the central Southern Alps: hence, by careful grid selection, shallow seismic sources can effectively be discriminated against. This beamforming approach produces many (>900) possible events. Initial beamforming detections are grouped by moveout and stacked to produce a subset of higher-quality events for use as templates in a cross-correlation detector. Events detected by cross-correlation are stacked to increase their signal-to-noise charectaristics before being located using a 3D velocity model. This method produces a spatially and temporally continuous catalogue of LFEs throughout the 6.5 year study period. The catalogue highlights quasi-continuous slow deformation occuring beneath the seismogenic zone near the Alpine Fault, punctuated by periods of increased LFE generation associated with tremor, and following large regional earthquakes. To date we have found no evidence of LFE generation north-east of Mt. Cook, the highest point in the Southern Alps, despite systematic searching throughout the region. We suggest that the along-strike cessation of tremor is due to changes in the fault's dip and the hypothesised presence of partially subducted passive margin material. This remnant passive margin would lie benath the tremor-generating region and has been linked to along-strike changes in subcrustal earthquake distributions (Boese et al., 2013).

Environment-based selection effects of Planck clusters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kosyra, R.; Gruen, D.; Seitz, S.

2015-07-24

We investigate whether the large-scale structure environment of galaxy clusters imprints a selection bias on Sunyaev–Zel'dovich (SZ) catalogues. Such a selection effect might be caused by line of sight (LoS) structures that add to the SZ signal or contain point sources that disturb the signal extraction in the SZ survey. We use the Planck PSZ1 union catalogue in the Sloan Digital Sky Survey (SDSS) region as our sample of SZ-selected clusters. We calculate the angular two-point correlation function (2pcf) for physically correlated, foreground and background structure in the RedMaPPer SDSS DR8 catalogue with respect to each cluster. We compare ourmore » results with an optically selected comparison cluster sample and with theoretical predictions. In contrast to the hypothesis of no environment-based selection, we find a mean 2pcf for background structures of -0.049 on scales of ≲40 arcmin, significantly non-zero at ~4σ, which means that Planck clusters are more likely to be detected in regions of low background density. We hypothesize this effect arises either from background estimation in the SZ survey or from radio sources in the background. We estimate the defect in SZ signal caused by this effect to be negligibly small, of the order of ~10 -4 of the signal of a typical Planck detection. Analogously, there are no implications on X-ray mass measurements. However, the environmental dependence has important consequences for weak lensing follow up of Planck galaxy clusters: we predict that projection effects account for half of the mass contained within a 15 arcmin radius of Planck galaxy clusters. We did not detect a background underdensity of CMASS LRGs, which also leaves a spatially varying redshift dependence of the Planck SZ selection function as a possible cause for our findings.« less

Probabilistic seismic hazard assessment for northern Southeast Asia

NASA Astrophysics Data System (ADS)

Chan, C. H.; Wang, Y.; Kosuwan, S.; Nguyen, M. L.; Shi, X.; Sieh, K.

2016-12-01

We assess seismic hazard for northern Southeast Asia through constructing an earthquake and fault database, conducting a series of ground-shaking scenarios and proposing regional seismic hazard maps. Our earthquake database contains earthquake parameters from global and local seismic catalogues, including the ISC, ISC-GEM, the global ANSS Comprehensive Catalogues, Seismological Bureau, Thai Meteorological Department, Thailand, and Institute of Geophysics Vietnam Academy of Science and Technology, Vietnam. To harmonize the earthquake parameters from various catalogue sources, we remove duplicate events and unify magnitudes into the same scale. Our active fault database include active fault data from previous studies, e.g. the active fault parameters determined by Wang et al. (2014), Department of Mineral Resources, Thailand, and Institute of Geophysics, Vietnam Academy of Science and Technology, Vietnam. Based on the parameters from analysis of the databases (i.e., the Gutenberg-Richter relationship, slip rate, maximum magnitude and time elapsed of last events), we determined the earthquake recurrence models of seismogenic sources. To evaluate the ground shaking behaviours in different tectonic regimes, we conducted a series of tests by matching the felt intensities of historical earthquakes to the modelled ground motions using ground motion prediction equations (GMPEs). By incorporating the best-fitting GMPEs and site conditions, we utilized site effect and assessed probabilistic seismic hazard. The highest seismic hazard is in the region close to the Sagaing Fault, which cuts through some major cities in central Myanmar. The northern segment of Sunda megathrust, which could potentially cause M8-class earthquake, brings significant hazard along the Western Coast of Myanmar and eastern Bangladesh. Besides, we conclude a notable hazard level in northern Vietnam and the boundary between Myanmar, Thailand and Laos, due to a series of strike-slip faults, which could potentially cause moderate-large earthquakes. Note that although much of the region has a low probability of damaging shaking, low-probability events have resulted in much destruction recently in SE Asia (e.g. 2008 Wenchuan, 2015 Sabah earthquakes).

VizieR Online Data Catalog: Mid-infrared study of RR Lyrae stars (Gavrilchenko+, 2014)

NASA Astrophysics Data System (ADS)

Gavrilchenko, T.; Klein, C. R.; Bloom, J. S.; Richards, J. W.

2015-02-01

The first goal was to find a large sample of WISE-observed RR Lyrae stars. A data base of previously identified RR Lyrae stars was created, combining information from General Catalogue of Variable Stars (GCVS), All Sky Automated Survey (ASAS), SIMBAD, VizieR, and individual papers. For many of the sources in this data base the only available data were the coordinates and RR Lyrae classification. When provided, information about the period, distance, subclass, and magnitude for several different wavebands was also stored. If a single source appeared in multiple surveys or papers, information from all relevant surveys was included, with markers indicating contradicting measurements between surveys. The resulting data base contains about 17000 sources, of which about 5000 sources have documented V-band periods. (3 data files).

Source Finding in the Era of the SKA (Precursors): Aegean 2.0

NASA Astrophysics Data System (ADS)

Hancock, Paul J.; Trott, Cathryn M.; Hurley-Walker, Natasha

2018-03-01

In the era of the SKA precursors, telescopes are producing deeper, larger images of the sky on increasingly small time-scales. The greater size and volume of images place an increased demand on the software that we use to create catalogues, and so our source finding algorithms need to evolve accordingly. In this paper, we discuss some of the logistical and technical challenges that result from the increased size and volume of images that are to be analysed, and demonstrate how the Aegean source finding package has evolved to address these challenges. In particular, we address the issues of source finding on spatially correlated data, and on images in which the background, noise, and point spread function vary across the sky. We also introduce the concept of forced or prioritised fitting.

Observations of low luminosity X-ray sources in Vela-Puppis

NASA Technical Reports Server (NTRS)

Pravdo, S. H.; Becker, R. H.; Boldt, E. A.; Holt, S. S.; Erlemitsos, P. J.; Swank, J. H.

1978-01-01

Results of a study of the X-ray emission from a small portion of the galactic plane near galactic longitude 260 deg are presented. This region contains at least six low luminosity X-ray sources within approximately 10 deg. of PSRO833-45, which is near the center of the Gum Nebula. The X-ray source associated with the Vela pulsar, 4U0833-45, is observed at twice its 4U catalogue intensity. The lack of X-ray pulsations at the pulsar period, the non thermal power law spectrum, and models of the X-ray come from an extended source approximately 1 deg in radius. The observation of a high temperature spectrum in a field of view containing only Puppis A among known sources has led to the discovery of a new OSO-8 source, OSO752-39. Other spectra from this region are discussed.

Developing a prenatal nursing care International Classification for Nursing Practice catalogue.

PubMed

Liu, L; Coenen, A; Tao, H; Jansen, K R; Jiang, A L

2017-09-01

This study aimed to develop a prenatal nursing care catalogue of International Classification for Nursing Practice. As a programme of the International Council of Nurses, International Classification for Nursing Practice aims to support standardized electronic nursing documentation and facilitate collection of comparable nursing data across settings. This initiative enables the study of relationships among nursing diagnoses, nursing interventions and nursing outcomes for best practice, healthcare management decisions, and policy development. The catalogues are usually focused on target populations. Pregnant women are the nursing population addressed in this project. According to the guidelines for catalogue development, three research steps have been adopted: (a) identifying relevant nursing diagnoses, interventions and outcomes; (b) developing a conceptual framework for the catalogue; (c) expert's validation. This project established a prenatal nursing care catalogue with 228 terms in total, including 69 nursing diagnosis, 92 nursing interventions and 67 nursing outcomes, among them, 57 nursing terms were newly developed. All terms in the catalogue were organized by a framework with two main categories, i.e. Expected Changes of Pregnancy and Pregnancy at Risk. Each category had four domains, representing the physical, psychological, behavioral and environmental perspectives of nursing practice. This catalogue can ease the documentation workload among prenatal care nurses, and facilitate storage and retrieval of standardized data for many purposes, such as quality improvement, administration decision-support and researches. The documentations of prenatal care provided data that can be more fluently communicated, compared and evaluated across various healthcare providers and clinic settings. © 2016 International Council of Nurses.

A Study of Emotions in Requirements Engineering

NASA Astrophysics Data System (ADS)

Colomo-Palacios, Ricardo; Hernández-López, Adrián; García-Crespo, Ángel; Soto-Acosta, Pedro

Requirements engineering (RE) is a crucial activity in software development projects. This phase in the software development cycle is knowledge intensive, and thus, human capital intensive. From the human point of view, emotions play an important role in behavior and can even act as behavioral motivators. Thus, if we consider that RE represents a set of knowledge-intensive tasks, which include acceptance and negotiation activities, then the emotional factor represents a key element in these issues. However, the emotional factor in RE has not received the attention it deserves. This paper aims to integrate the stakeholder's emotions into the requirement process, proposing to catalogue them like any other factor in the process such as clarity or stability. Results show that high arousal and low pleasure levels are predictors of high versioning requirements.

Automated evaluation of matrix elements between contracted wavefunctions: A Mathematica version of the FRODO program

NASA Astrophysics Data System (ADS)

Angeli, C.; Cimiraglia, R.

2013-02-01

A symbolic program performing the Formal Reduction of Density Operators (FRODO), formerly developed in the MuPAD computer algebra system with the purpose of evaluating the matrix elements of the electronic Hamiltonian between internally contracted functions in a complete active space (CAS) scheme, has been rewritten in Mathematica. New version : A program summaryProgram title: FRODO Catalogue identifier: ADV Y _v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADVY_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 3878 No. of bytes in distributed program, including test data, etc.: 170729 Distribution format: tar.gz Programming language: Mathematica Computer: Any computer on which the Mathematica computer algebra system can be installed Operating system: Linux Classification: 5 Catalogue identifier of previous version: ADV Y _v1_0 Journal reference of previous version: Comput. Phys. Comm. 171(2005)63 Does the new version supersede the previous version?: No Nature of problem. In order to improve on the CAS-SCF wavefunction one can resort to multireference perturbation theory or configuration interaction based on internally contracted functions (ICFs) which are obtained by application of the excitation operators to the reference CAS-SCF wavefunction. The previous formulation of such matrix elements in the MuPAD computer algebra system, has been rewritten using Mathematica. Solution method: The method adopted consists in successively eliminating all occurrences of inactive orbital indices (core and virtual) from the products of excitation operators which appear in the definition of the ICFs and in the electronic Hamiltonian expressed in the second quantization formalism. Reasons for new version: Some years ago we published in this journal a couple of papers [1, 2] hereafter to be referred to as papers I and II, respectively dedicated to the automated evaluation of the matrix elements of the molecular electronic Hamiltonian between internally contracted functions [3] (ICFs). In paper II the program FRODO (after Formal Reduction Of Density Operators) was presented with the purpose of providing working formulas for each occurrence of the ICFs. The original FRODO program was written in the MuPAD computer algebra system [4] and was actively used in our group for the generation of the matrix elements to be employed in the third-order n-electron valence state perturbation theory (NEVPT) [5-8] as well as in the internally contracted configuration interaction (IC-CI) [9]. We present a new version of the program FRODO written in the Mathematica system [10]. The reason for the rewriting of the program lies in the fact that, on the one hand, MuPAD does not seem to be any longer available as a stand-alone system and, on the other hand, Mathematica, due to its ubiquitousness, appears to be increasingly the computer algebra system most widely used nowadays. Restrictions: The program is limited to no more than doubly excited ICFs. Running time: The examples described in the Readme file take a few seconds to run. References: [1] C. Angeli, R. Cimiraglia, Comp. Phys. Comm. 166 (2005) 53. [2] C. Angeli, R. Cimiraglia, Comp. Phys. Comm. 171 (2005) 63. [3] H.-J. Werner, P. J. Knowles, Adv. Chem. Phys. 89 (1988) 5803. [4] B. Fuchssteiner, W. Oevel: http://www.mupad.de Mupad research group, university of Paderborn. Mupad version 2.5.3 for Linux. [5] C. Angeli, R. Cimiraglia, S. Evangelisti, T. Leininger, J.-P. Malrieu, J. Chem. Phys. 114 (2001) 10252. [6] C. Angeli, R. Cimiraglia, J.-P. Malrieu, J. Chem. Phys. 117 (2002) 9138. [7] C. Angeli, B. Bories, A. Cavallini, R. Cimiraglia, J. Chem. Phys. 124 (2006) 054108. [8] C. Angeli, M. Pastore, R. Cimiraglia, Theor. Chem. Acc. 117 (2007) 743. [9] C. Angeli, R. Cimiraglia, Mol. Phys. in press, DOI:10.1080/00268976.2012.689872 [10] http://www.wolfram.com/Mathematica. Mathematica version 8 for Linux.

Local electron tomography using angular variations of surface tangents: Stomo version 2

NASA Astrophysics Data System (ADS)

Petersen, T. C.; Ringer, S. P.

2012-03-01

In a recent publication, we investigated the prospect of measuring the outer three-dimensional (3D) shapes of nano-scale atom probe specimens from tilt-series of images collected in the transmission electron microscope. For this purpose alone, an algorithm and simplified reconstruction theory were developed to circumvent issues that arise in commercial "back-projection" computations in this context. In our approach, we give up the difficult task of computing the complete 3D continuum structure and instead seek only the 3D morphology of internal and external scattering interfaces. These interfaces can be described as embedded 2D surfaces projected onto each image in a tilt series. Curves and other features in the images are interpreted as inscribed sets of tangent lines, which intersect the scattering interfaces at unknown locations along the direction of the incident electron beam. Smooth angular variations of the tangent line abscissa are used to compute the surface tangent intersections and hence the 3D morphology as a "point cloud". We have published the explicit details of our alternative algorithm along with the source code entitled "stomo_version_1". For this work, we have further modified the code to efficiently handle rectangular image sets, perform much faster tangent-line "edge detection" and smoother tilt-axis image alignment using simple bi-linear interpolation. We have also adapted the algorithm to detect tangent lines as "ridges", based upon 2nd order partial derivatives of the image intensity; the magnitude and orientation of which is described by a Hessian matrix. Ridges are more appropriate descriptors for tangent-line curves in phase contrast images outlined by Fresnel fringes or absorption contrast data from fine-scale objects. Improved accuracy, efficiency and speed for "stomo_version_2" is demonstrated in this paper using both high resolution electron tomography data of a nano-sized atom probe tip and simulated absorption-contrast images. Program summaryProgram title: STOMO version 2 Catalogue identifier: AEFS_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEFS_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 2854 No. of bytes in distributed program, including test data, etc.: 23 559 Distribution format: tar.gz Programming language: C/C++ Computer: PC Operating system: Windows XP RAM: Scales as the product of experimental image dimensions multiplied by the number of points chosen by the user in polynomial fitting. Typical runs require between 50 Mb and 100 Mb of RAM. Supplementary material: Sample output files, for the test run provided, are available. Classification: 7.4, 14 Catalogue identifier of previous version: AEFS_v1_0 Journal reference of previous version: Comput. Phys. Comm. 181 (2010) 676 Does the new version supersede the previous version?: Yes Nature of problem: A local electron tomography algorithm of specimens for which conventional back projection may fail and or data for which there is a limited angular range (which would otherwise cause significant 'missing-wedge' artefacts). The algorithm does not solve the tomography back projection problem but rather locally reconstructs the 3D morphology of surfaces defined by varied scattering densities. Solution method: Local reconstruction is effected using image-analysis edge and ridge detection computations on experimental tilt series to measure smooth angular variations of surface tangent-line intersections, which generate point clouds decorating the embedded and or external scattering surfaces of a specimen. Reasons for new version: The new version was coded to cater for rectangular images in experimental tilt-series, ensure smoother image rotations, provide ridge detection (suitable for sensing phase-contrast Fresnel fringes and other fine-scale structures), faster/larger kernel edge detection and also greatly reduce RAM usage. Specimen surface normals are also explicitly computed from tangent-line and edge intersections, providing new information for potential use in point cloud rendering. Hysteresis thresholding implemented in the version 1 edge-detection algorithm provided only sparse edge-linking. Version 2 now implements edge tracking using recursion to fully link the edges during hysteresis thresholding. Furthermore in version 1 the minimum number of fitted polynomial points (specified in the input file) was not correctly imposed, which has been fixed for version 2. Most of these changes increase the accuracy of 3d morphology surface-tomography reconstructions by facilitating the use of more/finer tilt angles and experimental images of increased spatial-resolution. The ridge detection was incorporated to specifically improve the reconstruction of internal specimen morphology. Summary of revisions: Included Hessian() function to compute 2nd order spatial derivatives of image intensities (operates in the same fashion as the previous and existing Sobel() function). Changed convolve_Gaussian() function to alternatively use successive 1D convolutions (rather than cumbersome 2D summations implemented in version 1), resulting in a large increase in computational speed without any loss in accuracy. The convolution kernel size was hence widened to three times the full width half maximum of the Gaussian filter to improve scale-space selection accuracy. A ridge detection option was included to compute edge maps sensitive to ridges, rather than edges, using elements from a Hessian matrix; the eigenvalues of which were used to define ridge direction for Canny-type hysteresis thresholding. Function edge_detect_Canny() was also altered to pass the gradient-direction maps (from either Hessian or Sobel based operators) in and out of scope for computation of surface normals; thereby enabling the output of both point-cloud and corresponding unstructured vector-field surface descriptors. Function rotate_imgs() was changed to incorporate basic bi-linear interpolation for improved tilt-axis alignment of the entire tilt series in exp_data.dat. Smoother and more accurate edge maps are thereby produced. Algorithm convert_point_cloud_to_tomogram() was created to output the tomogram 3d_imgs.dat in a more memory efficient manner. The function shell_sort(), adapted from numerical recipes in C, was also coded for this purpose. The new function compute_xyz() was coded to calculate point-clouds and tomogram surface normals using information from single tilt images, as opposed to the entire stack. This function is hence used iteratively throughout the reconstruction as each tilt image is analysed in succession. The new function reconstruct_local() is the heart of stomo_version_2.cpp. the main() source code in stomo_version_1.cpp has been rewritten here to process experimental images and edge maps one at a time, using a buffered 3d array of dimensions dictated solely by the number of tilt images required for the local SVD fit of the angular variations. These changes (along with similar iterative file writing) have been made to vastly reduce memory usage and hence allow higher spatial and angular resolution data sets to be analysed without recourse to high performance computing resources. The input file has been simplified by removing the 'slices' and 'channels' settings (used in version 1 for crude image binning), which are now equal to the respective numbers of image rows and columns. Every summation over image rows and columns has been checked to enable the analysis of rectangular images without error. For images of specimens with high aspect-ratios, such as narrow tips, these fixes allow significant reductions in computation time and memory usage. Some arrays in the source code were not appropriately zeroed in version 1, causing reconstruction artefacts in some cases. These problems have now been fixed. Fixed an if-statement to correctly impose the minimum number of fitted polynomial points, thereby reducing noise in the reconstructed data. Implemented proper edge linking in the hysteresis thresholding code for Canny edge detection. Restrictions: The input experimental tilt-series of images must be registered with respect to a common single tilt axis with known orientation and position. Running time: For high quality reconstruction, 2-5 min.

The Herschel-ATLAS Data Release 1 - II. Multi-wavelength counterparts to submillimetre sources

NASA Astrophysics Data System (ADS)

Bourne, N.; Dunne, L.; Maddox, S. J.; Dye, S.; Furlanetto, C.; Hoyos, C.; Smith, D. J. B.; Eales, S.; Smith, M. W. L.; Valiante, E.; Alpaslan, M.; Andrae, E.; Baldry, I. K.; Cluver, M. E.; Cooray, A.; Driver, S. P.; Dunlop, J. S.; Grootes, M. W.; Ivison, R. J.; Jarrett, T. H.; Liske, J.; Madore, B. F.; Popescu, C. C.; Robotham, A. G.; Rowlands, K.; Seibert, M.; Thompson, M. A.; Tuffs, R. J.; Viaene, S.; Wright, A. H.

2016-10-01

This paper is the second in a pair of papers presenting data release 1 (DR1) of the Herschel Astrophysical Terahertz Large Area Survey (H-ATLAS), the largest single open-time key project carried out with the Herschel Space Observatory. The H-ATLAS is a wide-area imaging survey carried out in five photometric bands at 100, 160, 250, 350 and 500 μm covering a total area of 600 deg2. In this paper, we describe the identification of optical counterparts to submillimetre sources in DR1, comprising an area of 161 deg2 over three equatorial fields of roughly 12 × 4.5 deg centred at 9h, 12h and 14{^h.}5, respectively. Of all the H-ATLAS fields, the equatorial regions benefit from the greatest overlap with current multi-wavelength surveys spanning ultraviolet (UV) to mid-infrared regimes, as well as extensive spectroscopic coverage. We use a likelihood ratio technique to identify Sloan Digital Sky Survey counterparts at r < 22.4 for 250-μm-selected sources detected at ≥4σ (≈28 mJy). We find `reliable' counterparts (reliability R ≥ 0.8) for 44 835 sources (39 per cent), with an estimated completeness of 73.0 per cent and contamination rate of 4.7 per cent. Using redshifts and multi-wavelength photometry from GAMA and other public catalogues, we show that H-ATLAS-selected galaxies at z < 0.5 span a wide range of optical colours, total infrared (IR) luminosities and IR/UV ratios, with no strong disposition towards mid-IR-classified active galactic nuclei in comparison with optical selection. The data described herein, together with all maps and catalogues described in the companion paper, are available from the H-ATLAS website at www.h-atlas.org.

A search for debris disks in the Herschel-ATLAS

NASA Astrophysics Data System (ADS)

Thompson, M. A.; Smith, D. J. B.; Stevens, J. A.; Jarvis, M. J.; Vidal Perez, E.; Marshall, J.; Dunne, L.; Eales, S.; White, G. J.; Leeuw, L.; Sibthorpe, B.; Baes, M.; González-Solares, E.; Scott, D.; Vieiria, J.; Amblard, A.; Auld, R.; Bonfield, D. G.; Burgarella, D.; Buttiglione, S.; Cava, A.; Clements, D. L.; Cooray, A.; Dariush, A.; de Zotti, G.; Dye, S.; Eales, S.; Frayer, D.; Fritz, J.; Gonzalez-Nuevo, J.; Herranz, D.; Ibar, E.; Ivison, R. J.; Lagache, G.; Lopez-Caniego, M.; Maddox, S.; Negrello, M.; Pascale, E.; Pohlen, M.; Rigby, E.; Rodighiero, G.; Samui, S.; Serjeant, S.; Temi, P.; Valtchanov, I.; Verma, A.

2010-07-01

Aims: We aim to demonstrate that the Herschel-ATLAS (H-ATLAS) is suitable for a blind and unbiased survey for debris disks by identifying candidate debris disks associated with main sequence stars in the initial science demonstration field of the survey. We show that H-ATLAS reveals a population of far-infrared/sub-mm sources that are associated with stars or star-like objects on the SDSS main-sequence locus. We validate our approach by comparing the properties of the most likely candidate disks to those of the known population. Methods: We use a photometric selection technique to identify main sequence stars in the SDSS DR7 catalogue and a Bayesian Likelihood Ratio method to identify H-ATLAS catalogue sources associated with these main sequence stars. Following this photometric selection we apply distance cuts to identify the most likely candidate debris disks and rule out the presence of contaminating galaxies using UKIDSS LAS K-band images. Results: We identify 78 H-ATLAS sources associated with SDSS point sources on the main-sequence locus, of which two are the most likely debris disk candidates: H-ATLAS J090315.8 and H-ATLAS J090240.2. We show that they are plausible candidates by comparing their properties to the known population of debris disks. Our initial results indicate that bright debris disks are rare, with only 2 candidates identified in a search sample of 851 stars. We also show that H-ATLAS can derive useful upper limits for debris disks associated with Hipparcos stars in the field and outline the future prospects for our debris disk search programme. Herschel is an ESA space observatory with science instruments provided by European-led Principal Investigator consortia and with important participation from NASA.

The second Herschel-ATLAS Data Release - III. Optical and near-infrared counterparts in the North Galactic Plane field

NASA Astrophysics Data System (ADS)

Furlanetto, C.; Dye, S.; Bourne, N.; Maddox, S.; Dunne, L.; Eales, S.; Valiante, E.; Smith, M. W.; Smith, D. J. B.; Ivison, R. J.; Ibar, E.

2018-05-01

This paper forms part of the second major public data release of the Herschel Astrophysical Terahertz Large Area Survey (H-ATLAS). In this work, we describe the identification of optical and near-infrared counterparts to the submillimetre detected sources in the 177 deg2 North Galactic Plane (NGP) field. We used the likelihood ratio method to identify counterparts in the Sloan Digital Sky Survey and in the United Kingdom InfraRed Telescope Imaging Deep Sky Survey within a search radius of 10 arcsec of the H-ATLAS sources with a 4σ detection at 250 μm. We obtained reliable (R ≥ 0.8) optical counterparts with r < 22.4 for 42 429 H-ATLAS sources (37.8 per cent), with an estimated completeness of 71.7 per cent and a false identification rate of 4.7 per cent. We also identified counterparts in the near-infrared using deeper K-band data which covers a smaller ˜25 deg2. We found reliable near-infrared counterparts to 61.8 per cent of the 250-μm-selected sources within that area. We assessed the performance of the likelihood ratio method to identify optical and near-infrared counterparts taking into account the depth and area of both input catalogues. Using catalogues with the same surface density of objects in the overlapping ˜25 deg2 area, we obtained that the reliable fraction in the near-infrared (54.8 per cent) is significantly higher than in the optical (36.4 per cent). Finally, using deep radio data which covers a small region of the NGP field, we found that 80-90 per cent of our reliable identifications are correct.

SkyMapper Southern Survey: First Data Release (DR1)

NASA Astrophysics Data System (ADS)

Wolf, Christian; Onken, Christopher A.; Luvaul, Lance C.; Schmidt, Brian P.; Bessell, Michael S.; Chang, Seo-Won; Da Costa, Gary S.; Mackey, Dougal; Martin-Jones, Tony; Murphy, Simon J.; Preston, Tim; Scalzo, Richard A.; Shao, Li; Smillie, Jon; Tisserand, Patrick; White, Marc C.; Yuan, Fang

2018-02-01

We present the first data release of the SkyMapper Southern Survey, a hemispheric survey carried out with the SkyMapper Telescope at Siding Spring Observatory in Australia. Here, we present the survey strategy, data processing, catalogue construction, and database schema. The first data release dataset includes over 66 000 images from the Shallow Survey component, covering an area of 17 200 deg2 in all six SkyMapper passbands uvgriz, while the full area covered by any passband exceeds 20 000 deg2. The catalogues contain over 285 million unique astrophysical objects, complete to roughly 18 mag in all bands. We compare our griz point-source photometry with Pan-STARRS1 first data release and note an RMS scatter of 2%. The internal reproducibility of SkyMapper photometry is on the order of 1%. Astrometric precision is better than 0.2 arcsec based on comparison with Gaia first data release. We describe the end-user database, through which data are presented to the world community, and provide some illustrative science queries.

NuSTAR view of the central region of M31

NASA Astrophysics Data System (ADS)

Stiele, H.; Kong, A. K. H.

2018-04-01

Our neighbouring large spiral galaxy, the Andromeda galaxy (M31 or NGC 224), is an ideal target to study the X-ray source population of a nearby galaxy. NuSTAR observed the central region of M31 in 2015 and allows studying the population of X-ray point sources at energies higher than 10 keV. Based on the source catalogue of the large XMM-Newton survey of M31, we identified counterparts to the XMM-Newton sources in the NuSTAR data. The NuSTAR data only contain sources of a brightness comparable (or even brighter) than the selected sources that have been detected in XMM-Newton data. We investigate hardness ratios, spectra, and long-term light curves of individual sources obtained from NuSTAR data. Based on our spectral studies, we suggest four sources as possible X-ray binary candidates. The long-term light curves of seven sources that have been observed more than once show low (but significant) variability.

Modern Special Collections Cataloguing: A University of London Case Study

ERIC Educational Resources Information Center

Attar, K. E.

2013-01-01

Recent years have seen a growing emphasis on modern special collections (in themselves no new phenomenon), with a dichotomy between guidance for detailed cataloguing in "Descriptive Cataloging of Rare Materials (Books)" (DCRM(B), 2007) and the value of clearing cataloguing backlogs expeditiously. This article describes the De la Mare…

Guidelines for Cataloguing-in-Publication.

ERIC Educational Resources Information Center

Anderson, Dorothy, Comp.

The guidelines provide the criteria for the design of a national cataloguing-in-publication (CIP) program which will both be a component part of the international CIP network and fit the requirements of a specific library and publishing environment. Cataloguing-in-publication is defined, its development is traced, and current CIP programs in nine…

Variable Star Catalogs: Their Past, Present and Future

NASA Astrophysics Data System (ADS)

Samus, N. N.; Kazarovets, E. V.; Kireeva, N. N.; Pastukhova, E. N.; Durlevich, O. V.

2010-02-01

After the second World War, the International Astronomical Union made astronomers of the Soviet Union responsible for variable-star catalogues. This work has been continued ever since the first edition of the General Catalogue of Variable Stars compiled by the team headed by P. P. Parenago and B. V. Kukarkin and published in 1948. Currently, the catalogue work is a joint project of the Institute of Astronomy (Russian Academy of Sciences) and Sternberg Astronomical Institute (Moscow University). This paper is a brief review of recent trends in the field of variable-star catalogues. We discuss problems as well as new prospects related to modern large-scale automatic photometric sky surveys, and outline the state of discussions on the future of the variable-star catalogues in the profile commissions of the IAU.

DIRAC: A new version of computer algebra tools for studying the properties and behavior of hydrogen-like ions

NASA Astrophysics Data System (ADS)

McConnell, Sean; Fritzsche, Stephan; Surzhykov, Andrey

2010-03-01

During recent years, the DIRAC package has proved to be an efficient tool for studying the structural properties and dynamic behavior of hydrogen-like ions. Originally designed as a set of MAPLE procedures, this package provides interactive access to the wave and Green's functions in the non-relativistic and relativistic frameworks and supports analytical evaluation of a large number of radial integrals that are required for the construction of transition amplitudes and interaction cross sections. We provide here a new version of the DIRAC program which is developed within the framework of MATHEMATICA (version 6.0). This new version aims to cater to a wider community of researchers that use the MATHEMATICA platform and to take advantage of the generally faster processing times therein. Moreover, the addition of new procedures, a more convenient and detailed help system, as well as source code revisions to overcome identified shortcomings should ensure expanded use of the new DIRAC program over its predecessor. New version program summaryProgram title: DIRAC Catalogue identifier: ADUQ_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADUQ_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC license, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 45 073 No. of bytes in distributed program, including test data, etc.: 285 828 Distribution format: tar.gz Programming language: Mathematica 6.0 or higher Computer: All computers with a license for the computer algebra package Mathematica (version 6.0 or higher) Operating system: Mathematica is O/S independent Classification: 2.1 Catalogue identifier of previous version: ADUQ_v1_0 Journal reference of previous version: Comput. Phys. Comm. 165 (2005) 139 Does the new version supersede the previous version?: Yes Nature of problem: Since the early days of quantum mechanics, the "hydrogen atom" has served as one of the key models for studying the structure and dynamics of various quantum systems. Its analytic solutions are frequently used in case studies in atomic and molecular physics, quantum optics, plasma physics, or even in the field of quantum information and computation. Fast and reliable access to functions and properties of the hydrogenic systems are frequently required, in both the non-relativistic and relativistic frameworks. Despite all the knowledge about one-electron ions, providing such an access is not a simple task, owing to the rather complicated mathematical structure of the Schrödinger and especially Dirac equations. Moreover, for analyzing experimental results as well as for performing advanced theoretical studies one often needs (apart from the detailed information on atomic wave- and Green's functions) to be able to calculate a number of integrals involving these functions. Although for many types of transition operators these integrals can be evaluated analytically in terms of special mathematical functions, such an evaluation is usually rather involved and prone to mistakes. Solution method: A set of Mathematica procedures is developed which provides both the non-relativistic and relativistic solutions of the "Hydrogen atom model". It facilitates, moreover, the symbolic evaluation of integrals involved in the calculations of cross sections and transition amplitudes. These procedures are based on a large number of relations among special mathematical functions, information about their integral representations, recurrence formulae and series expansions. Based on this knowledge, the DIRAC tools provide a fast and reliable algebraic (and if necessary, numeric) manipulation of functions and properties of one-electron systems, thus helping to obtain further insight into the behavior of quantum physical systems. Reasons for new version: The original version of the DIRAC program was developed as a toolbox of Maple procedures and was submitted to the CPC library in 2004 (cf. Ref. [1]). Since then DIRAC has found its niche in advanced theoretical studies carried out in realm of heavy ion physics. With the help of this program detailed analysis has been performed, in particular, for the various excitation and ionization processes occurring in relativistic ion-atom collisions [2], the polarization of the characteristic X-ray radiation following radiative electron capture [3], the correlation properties of the two-photon emission from few-electron heavy ions [4], the spin entanglement phenomena in atomic photoionization [5] and even for exploring the vibrational excitations of the heavy nuclei [6]. Although these studies have conclusively proven the potential of the program, they have also illuminated routes for its further enhancement. Apart from certain source code revisions, demand has grown for a new version of DIRAC compatible with the Mathematica platform. The version presented here includes a wider ranging and more user friendly interactive help system, a number of new procedures and reprogramming for greater computational efficiency. Summary of revisions: The most important new capabilities of the DIRAC program since the previous version are: The utilization of the Mathematica (version 6.0) platform. The addition of a number of new procedures. Since the complete list of the new (and updated) procedures can be found in the interactive help library of the program, we mention here only the most important ones: DiracGlobal[] - Displays a list of the current global settings which specify the framework, nuclear charge and the units which are to be used by the DIRAC program. DiracRadialOrbitalMomentum[] - Returns a non-relativistic radial orbital in momentum space for both, the bound and free electron states. DiracSlaterRadial[] - Evaluates the radial Slater integral both, with the non-relativistic and relativistic wavefunctions. In the previous version of the program this procedure was restricted to the non-relativistic framework only. DiracGreensIntegralRadial[] - Evaluates the two-dimensional radial integrals with the wave- and Green's functions both in non-relativistic and relativistic frameworks. DiracAngularMatrixElement[] - Calculates the angular matrix elements for various irreducible tensor operators. The elimination of some redundant procedures. In particular, the previous version supported evaluation of the spherical Bessel functions, Wigner 3j symbols, Clebsch-Gordan coefficients and spherical harmonics functions. These tools are now superseded by in-built procedures of Mathematica. The development of a full featured interactive help system which follows the style of the Mathematica Help Pages. Extensive revision of the source code in order to correct a number of bugs and inconsistencies that have been identified during use of the previous version of Dirac. The DIRAC package is distributed as a compressed tar file from which the DIRAC root directory can be (re-)generated. The root directory contains the source code and help libraries, a "Readme" file, Dirac_Installation_Instructions, as well as the notebook DemonstrationNotebook.nb that includes a number of test cases to illustrate the use of the program. These test cases, which concern the theoretical analysis of wavefunctions and the fine-structure of hydrogen-like ions, has already been discussed in detail in Ref. [1] and are provided here in order to underline the continuity between the previous (Maple) and new (Mathematica) versions of the DIRAC program. Unusual features: Even though all basic features of the previous Maple version have been retained in as close to the original form as possible, some small syntax changes became necessary in the new version of DIRAC in order to follow Mathematica standards. First of all, these changes concern naming conventions for DIRAC's procedures. As was discussed in Ref. [1], previously rather long names were employed in which each word was separated by an underscore. For example, when running the Maple version of the program one had to call the procedure Dirac_Slater_radial() in order to evaluate the Slater integral. Such a naming convention however, cannot be used in the Mathematica framework where the underscore character is reserved to represent Blank, a built-in symbol. In the new version of DIRAC we therefore follow the Mathematica convention of delimiting each word in a procedure's name by capitalization. Evaluation of the Slater determinant can be accomplished now simply by entering DiracSlaterRadial[]. Besides procedure names, a new convention is introduced to represent fundamental physical constants. In this version of DIRAC the group of (preset) global variables has changed to resemble their conventional symbols, specifically α, a, e, m, c and ℏ, being the fine structure constant, Bohr radius, electron charge, electron mass, speed of light and the Planck constant respectively. If the numerical evaluator N is wrapped around any of these constants, their numerical values are returned. Running time: Although the program replies promptly upon most requests, the running time also depends on the particular task. For example, computation of (radial) matrix elements involving components of relativistic wavefunctions might require a few seconds of a runtime. A number of test calculations performed regarding this and other tasks clearly indicate that the new version of Dirac requires up to 90% less evaluation time compared to its predecessor. References:A. Surzhykov, P. Koval, S. Fritzsche, Comput. Phys. Comm. 165 (2005) 139. H. Ogawa, et al., Phys. Rev. A 75 (2007) 1. A.V. Maiorova, et al., J. Phys. B: At. Mol. Opt. Phys. 42 (2009) 125003. L. Borowska, A. Surzhykov, Th. Stöhlker, S. Fritzsche, Phys. Rev. A 74 (2006) 062516. T. Radtke, S. Fritzsche, A. Surzhykov, Phys. Rev. A 74 (2006) 032709. A. Pálffy, Z. Harman, A. Surzhykov, U.D. Jentschura, Phys. Rev. A 75 (2007) 012712.

The impact of Hipparcos star-fixing extends to life's evolution

NASA Astrophysics Data System (ADS)

1997-05-01

"ESA's Hipparcos brings the greatest step forward in star measurements since Tycho Brahe," Bonnet says. "When the Danish astronomer died in 1601, the German astronomer Johannes Kepler inherited his careful observations. Kepler used them to discover the laws of the motions of planets, and paved the way for Isaac Newton's gravitational theory. Now we have another multinational success story from European astronomy". "Hipparcos began as an imaginative French concept to chart the stars by satellite," Bonnet continues. "ESA adopted the idea and many astronomers in our member states collaborated in the mission. A hundred-fold improvement in the accuracy of star positions may already alter the size of the Universe and the ages of stars. So don't be surprised if the results from Hipparcos are as revolutionary as Tycho Brahe's, in their impact on our knowledge of the cosmos." The study of the Earth itself will benefit from the new star data. Wobbles of the Earth and variations in its rate of rotation can now be measured far more accurately. The ozone layer will be monitored by ESA's Envisat environmental mission, by looking for chemical alterations in the light from 1000 Hipparcos stars, when seen on lines of sight slanting through the atmosphere. Even the erratic evolution of life on Earth may make more sense, as Hipparcos picks out stars that passed close enough to cause trouble here. Reliable identifications of stars heading towards or away from our vicinity were impossible before Hipparcos. The satellite measured shifts in the directions of stars in the sky with such high precision that astronomers can now pick out those few stars that scarcely change their bearings. Such stars are probably moving almost directly towards or away from us. A US-European team, led by Robert Preston at the Jet Propulsion Laboratory in California, used Hipparcos to search for nearby stars with very small shifts in position. They were, or will be, passers-by. Gliese 710, an inconspicuous star in the constellation Ophiuchus, is currently 63 light-years away and approaching at about 14 kilometres per second. From the Hipparcos data, it will pass within about one light-year, one million years from now. Joan Garcia-Sanchez, a doctoral student in Preston's team, identifies Gliese 710 in one of the scientific posters that display Hipparcos results in Venice. Garcia-Sanchez has found evidence that Gliese 710 is today moving more slowly towards the Sun than it was several decades ago. That may mean it is orbiting around another star, so far unidentified. If so, the closest distance to which Gliese 710 will approach may be nearer or farther than in the team's initial estimate. The stars of the Alpha Centauri system, at 4 light-years, are the nearest at present. Several stars investigated by Preston and his colleagues will come within 3 light-years during the next 8,500,000 years. Others have already passed by during a similar time-span and are now travelling away from us. "A star coming too near could put the Earth at risk," Bob Preston explains. "It might dislodge comets from a swarm that surrounds the Sun in the Oort Cloud, and send them into the inner Solar System. Some comets could then collide with our planet. The fossils tell us of past disasters, in extinctions of many species, and we hope to identify culprits among stars now hurrying away from the scene. The theory isn't new, but only now can we check it, thanks to the amazing precision of Hipparcos." Uncertainty about the timing of the stellar visits arises from inadequate information about the speed of approach or recession. That is measured from ground-based observatories, by shifts in the wavelengths of light (blueshifts and redshifts). A team led by Dave Latham at the Center for Astrophysics in Cambridge, Massachusetts, is busy making fresh observations to improve the ground-based data on the visitors, past and future. The Hipparcos Catalogue and the wider Universe Hipparcos results fill large catalogues due for release to the world's astronomers via the Internet and in CD-ROMs early in June, and in 16 printed volumes soon afterwards. These are results of four years of space observations, 1989-93, and a further three years of intensive computation. The Hipparcos Catalogue echoes the name of Hipparchus, who founded astrometry in ancient Greece. It gives precise data on 118,000 stars. A million stars, logged with lesser but still unprecedented ccuracy, comprise the Tycho Catalogue, named after Tycho Brahe. The role of Albert Einstein's theory of gravity illustrates the extraordinary accuracy of the Hipparcos Catalogue. General Relativity predicts a deflection of starlight by the Sun's gravity. Hitherto this was confirmed only with objects seen within a degree or two of the edge of the Sun, where the effect is strongest. Hipparcos was sensitive to the bending of light-rays even in directions at right angles to the Sun. If the computations had ignored General Relativity the star-fixing would be less accurate. Conversely, Einstein's predictions are found to be correct to within one part in a thousand. As well as the positions, distances and motions of many stars, the Hipparcos Catalogue includes unprecedented surveys of double and variable stars. Hipparcos observed 24,000 double stars in the Hipparcos Catalogue, of which 10,000 were not previously known to be double. Frequent observations, over the four years of the space operations, monitored the changes in brightness of 12,000 known variable stars, and discovered 8000 more. The stars charted by Hipparcos are relatively close, compared with the galaxies. Eleven teams of astronomers have cooperated in linking them to the wider cosmos, defined in the International Celestial Reference Frame. They matched Hipparcos stars to galaxies near the lines of sight, to the major photographic surveys of the sky, and to the sharp observations in long-range astronomy that come from widely spaced radio instruments and the Hubble Space Telescope. Radio astronomers will henceforward be able to correct any mismatch, by comparing nearby radio sources in the Hipparcos Catalogue with the positions of distant quasars. Jean Kovalevsky of the CJte d'Azur Observatory in Grasse, France, coordinated this work of uniting Hipparcos results with the cosmos in general. He is also the leader of the consortium called FAST (Fundamental Astronomy by Space Techniques) which is one of two multinational teams that worked in parallel to generate the basic Hipparcos Catalogue. "We have related the stars of Hipparcos to the whole Universe of galaxies and quasars, to better than two tenths of a millionth of a degree," Kovalevsky reports. "We have also got rid of a possible rotation of the system of Hipparcos stars, to more than twice that precision. And the wide Universe gives us a more reliable reference frame for the sky and the stars than our spinning, wobbling and orbiting planet has ever provided." Among the astronomical space missions already adopting Hipparcos data for better aiming is ESA's Infrared Space Observatory ISO. The forthcoming X-ray astronomy missions, NASA's AXAF and ESA's XMM, will rely on Hipparcos when searching the sky. Hipparcos stars will also guide deep space probes, including the NASA-ESA Cassini/Huygens mission to Saturn and Titan, and ESA's Rosetta mission to Comet Wirtanen. The Tycho project progresses from 1,000,000 to 3,000,000 stars The Tycho Catalogue gives the positions of many more stars, so although its accuracy is about one-tenth as good as the Hipparcos Catalogue's, it is the more generous source of greatly improved data for the world's astronomers. Plotting and characterizing eight times as many stars as the Hipparcos Catalogue, the Tycho Catalogue offers a comprehensive survey of the stars around the Sun. It includes 99.9 per cent of stars down to magnitude 10, which means stars 100 times fainter than the unaided human eye can normally see. Russian and German astronomers are now comparing the Tycho results on a million stars with positions of the same stars observed from the ground during the past 100 years, to measure their motions across the sky. The Danish astronomer Erik Hog is a worthy heir of Tycho Brahe. He adopted a star mapper, installed in Hipparcos for checking the telescope's aim, as an additional source of astrometric data. From Copenhagen University Observatory he led the multinational Tycho Data Analysis Consortium (TDAC) which produced the Tycho Catalogue. "A million million bits of data came from our star mapper in Hipparcos," Hog remarks. "We nearly drowned in the torrent when we started. So we limited the Tycho Catalogue to one million stars, in order to keep up with the work on the Hipparcos Catalogue. With more experience and faster computers, and based on the Hipparcos and Tycho Catalogues, we've started work on a Second Tycho Catalogue of three million stars. We hope to have it ready by 1999."

The Climate Data Centre of Deutscher Wetterdienst (DWD)

NASA Astrophysics Data System (ADS)

Kaspar, F.; Schreiber, K.-J.; Behrendt, J.

2010-09-01

In 2009 the German meteorological service (Deutscher Wetterdienst, DWD) has started to set up a Climate Data Centre (CDC) in order to provide unified access to its variety of climate data especially to users from research, educational and public institutions. CDC acts as a central point of contact to various data collections of DWD. These include observations from German weather stations and DWD's observatories, special data as e.g. from hydroclimatology, agro-climatology and medical climatology, but also from international activities of DWD, such as the Global Precipitation Climatology Center (GPCC), EUMETSAT's Satellite Application Facility on Climate Monitoring (CM-SAF) or marine climatological data (ship and buoy observations) of the Global Collecting Centre for Marine Climatological Data. Data are based on conventional surface observations over land and ocean as well as on various remote sensing methods, such as satellite observation. The major part consists of climate data from the past, but CDC will also include results from scenario calculations and projections for the future. In addition to pure observational data, CDC offers derived statistical parameters and spatial analyses as gridded datasets. As first step, a central data catalogue provides standardised descriptions and information on data access. It follows national and international rules for the description of geo-referenced data (GDI-DE; INSPIRE). The individual data providers of DWD can use the catalogue to easily edit and publish their metadata in a unified way. These metadata contain information on data access, data policy, data quality, spatial and temporal coverage, responsible persons, etc. The catalogue is based on an open source software product (geonetwork-opensource) that is also used by a large number of international organizations. Metadata can be exchanged (harvested) between these catalogues. This will allow implementing a structure that provides search capabilities over institutions. The software also allows implementing web-based mapping services and group-specific data access policies.

Useful Brazilian plants listed in the manuscripts and publications of the Scottish medic and naturalist George Gardner (1812-1849).

PubMed

Fagg, Christopher W; Lughadha, Eimear Nic; Milliken, William; Nicholas Hind, D J; Brandão, Maria G L

2015-02-23

Information regarding the beneficial use of native Brazilian plants was compiled by a number of European naturalists in the 19th century. The Scottish surgeon botanist George Gardner (1812-1849) was one such naturalist; however, the useful plants recorded in his manuscripts have not yet been studied in depth. To present data recorded by Gardner in his manuscript Catalogue of Brazilian Plants regarding the use of native plants by Brazilian people and evaluate the extent to which they have been explored. Data on useful plants were obtained from Gardner׳s manuscript Catalogue of Brazilian Plants deposited in the Archives of the Royal Botanic Gardens, Kew, UK. The identification of each plant was determined and/or updated by consulting the preserved botanical collections of Gardner deposited in the Herbarium of the Royal Botanic Gardens, Kew (hereafter K), and expert determinations in other herbaria where duplicates are held. Correlated pharmacological studies for each plant were obtained from the PubMed database. Information recorded in Gardner׳s diary and previously published elsewhere complemented these data. A total of 63 useful plants was recorded from the Catalogue and a further 30 from Gardner׳s book Travels in the Interior of Brazil (Gardner, 1846). Of the recorded names in the Catalogue, 46 (73%) could be identified to species by consulting specimens collected by Gardner and held at Kew. Thirty-six different traditional uses were registered for the identified plants, the most common being as febrifuges, to treat venereal complaints and as purgatives. Fewer than 50% of these species have been the focus of published pharmacological studies, yet for those which have been thus investigated, the efficacies reported by Gardner were confirmed. The data recorded by Gardner represent a rich, relatively unexplored source of information regarding the traditional uses of Brazilian plants which merits further investigation. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Probabilistic seismic hazard maps for Sinai Peninsula, Egypt

NASA Astrophysics Data System (ADS)

Deif, A.; Abou Elenean, K.; El Hadidy, M.; Tealeb, A.; Mohamed, A.

2009-09-01

Sinai experienced the largest Egyptian earthquake with moment magnitude (Mw) 7.2 in 1995 in the Gulf of Aqaba, 350 km from Cairo. It is characterized by the presence of many tourist projects in addition to different natural resources. The aim of the current study is to present, for the first time, the probabilistic spectral hazard maps for Sinai. Revised earthquake catalogues for Sinai and its surroundings, from 112 BC to 2006 AD with magnitude equal or greater than 3.0, are used to calculate seismic hazard in the region of interest between 27°N and 31.5°N and 32°E and 36°E. We declustered these catalogues to include only independent events. The catalogues were tested for the completeness of different magnitude ranges. 28 seismic source zones are used to define the seismicity. The recurrence rates and the maximum earthquakes across these zones were also determined from these modified catalogues. Strong ground motion relations for rock are used to produce 5% damped spectral acceleration values for four different periods (0.2, 0.5, 1.0 and 2.0 s) to define the uniform response spectra at each site (grid of 0.2° × 0.2° all over the area). Maps showing spectral acceleration values at 0.2, 0.5, 1.0 and 2.0 s periods as well as peak ground acceleration (PGA) for the return period of 475 years (equivalent to 90% probability on non-exceedence in 50 years) are presented. In addition, Uniform Hazard Spectra (UHS) at 25 different periods for the four main cities (Hurghda, Sharm El-Sheikh, Nuweibaa and Suez) are graphed. The highest hazard is found in the Gulf of Aqaba with maximum spectral accelerations 356 cm s-2 at a period of 0.22 s for a return period of 475 years.

GDF v2.0, an enhanced version of GDF

NASA Astrophysics Data System (ADS)

Tsoulos, Ioannis G.; Gavrilis, Dimitris; Dermatas, Evangelos

2007-12-01

An improved version of the function estimation program GDF is presented. The main enhancements of the new version include: multi-output function estimation, capability of defining custom functions in the grammar and selection of the error function. The new version has been evaluated on a series of classification and regression datasets, that are widely used for the evaluation of such methods. It is compared to two known neural networks and outperforms them in 5 (out of 10) datasets. Program summaryTitle of program: GDF v2.0 Catalogue identifier: ADXC_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADXC_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 98 147 No. of bytes in distributed program, including test data, etc.: 2 040 684 Distribution format: tar.gz Programming language: GNU C++ Computer: The program is designed to be portable in all systems running the GNU C++ compiler Operating system: Linux, Solaris, FreeBSD RAM: 200000 bytes Classification: 4.9 Does the new version supersede the previous version?: Yes Nature of problem: The technique of function estimation tries to discover from a series of input data a functional form that best describes them. This can be performed with the use of parametric models, whose parameters can adapt according to the input data. Solution method: Functional forms are being created by genetic programming which are approximations for the symbolic regression problem. Reasons for new version: The GDF package was extended in order to be more flexible and user customizable than the old package. The user can extend the package by defining his own error functions and he can extend the grammar of the package by adding new functions to the function repertoire. Also, the new version can perform function estimation of multi-output functions and it can be used for classification problems. Summary of revisions: The following features have been added to the package GDF: Multi-output function approximation. The package can now approximate any function f:R→R. This feature gives also to the package the capability of performing classification and not only regression. User defined function can be added to the repertoire of the grammar, extending the regression capabilities of the package. This feature is limited to 3 functions, but easily this number can be increased. Capability of selecting the error function. The package offers now to the user apart from the mean square error other error functions such as: mean absolute square error, maximum square error. Also, user defined error functions can be added to the set of error functions. More verbose output. The main program displays more information to the user as well as the default values for the parameters. Also, the package gives to the user the capability to define an output file, where the output of the gdf program for the testing set will be stored after the termination of the process. Additional comments: A technical report describing the revisions, experiments and test runs is packaged with the source code. Running time: Depending on the train data.

Collaborative Research: Catalog Completeness and Accuracy

DTIC Science & Technology

2013-01-01

catalogue for the region stretching from Saudi Arabia to western China for 1995 to the present. We have used all available data sources which includes...in Kyrgyzstan 9/97 to 8/00 (PASSCAL experiment) 4 stations in China 6/98 to 8/00 11 stations in China 6199 to 8/00 18 stations in Kyrgyzstan 7/99...automated, high- precision repicking to improve delineation of microseismic structures at the Soultz geothermal reservoir, Pure Appl. Geophys., 159, 563

PKS 2123-463: A Confirmed Gamma-ray Blazar at High Redshift

NASA Technical Reports Server (NTRS)

D'Ammando, F.; Rau, A.; Schady, P.; Finke, J.; Orienti, M.; Greiner, J.; Kann, D. A.; Ojha, R.; Foley, A. R.; Stevens, J.;

VizieR Online Data Catalog: Spectral Classes in Kapteyn areas 44-67 (Bartaya+, 1992)

NASA Astrophysics Data System (ADS)

Bartaya, R. A.; Kharadze, E. K.

2013-11-01

The present catalogue is the second one of the four catalogues published according to programme of Abastumani Astrophysical Observatory of a massive two-dimensional MK classification of stars in 115 kapteyn Select Areas (KA) of Northen Sky. The catalogue lists the spectral types and luminosity classes for 5888 stars in 24 Kapteyn areas 44-67 through the declination circle of 30°. The catalogue is compiled on the basis of the spectral data obtained with the 70-cm meniscus telescope of Abastumani Astrophysical Observatory using the 8° objective prism (dispersion 166Å/mm near Hγ; in the short-wave region, the spectrum extends up to 3500Å). The field of the meniscus telescope is 4.5°x4.5°. The photo material is taken on Kodak IIa-O, hyper-sensitized Kodak IIIa-J and in order to detect also Hα emission stars and M, S, C type stars in the surveyed Kapteyn areas (KA), hyper-sensitized Kodak IIIa-F plates were also taken. A limiting apparent magnitude in V for stars in question is 12.5 photographic mag. and for M ones - 15.0mag. The catalogue contains 94 stars with peculiarities in the spectrum, in particular Ap, Am, BaII and composite spectrum stars, as well as 9 emission objects, 381 M-type, 16 C and a few S and WC stars. The data for all KA's are uniform not only in the sense of classification accuracy (the whole classification is done by one person - the author of the present catalogue), but also in the sense of penetration. The errors of our determinations are: +/-0.6 for spectral subtype and+/-0.5 for luminosity class. The stars in the KA's are arranged in the Catalogue by increasing right ascension. The stars are numbered according to zones of 1° in declination. The printed catalogue is provided with suitable stellar charts for separate KA's reproduced from the Lick Catalogue. The reference system on the charts refers to 1950 epoch and it is plotted according to the Smithsonian Astrophysical Observatory (SAO) catalogue. (1 data file).

A catalogue of the small transients observed in STEREO HI-A and their associated in-situ measurements

NASA Astrophysics Data System (ADS)

Sanchez-Diaz, Eduardo; Rouillard, Alexis P.; Davies, Jackie A.; Kilpua, Emilia; Plotnikov, Illya

2017-04-01

The systematic monitoring of the solar wind in high-cadence and high-resolution heliospheric images taken by the Solar-Terrestrial Relation Observatory (STEREO) spacecraft permits the study of the spatial and temporal evolution of variable solar wind flows from the Sun out to 1 AU, and beyond. As part of the EU Framework 7 (FP7) Heliospheric Cataloguing, Analysis and Techniques Service (HELCATS) project, Plotnikov et al. (2016) created a catalogue of 190 Stream Interaction Regions (SIRs) well-observed in images taken by the Heliospheric Imager (HI) instruments onboard STEREO-A (ST-A). This catalogue has been made available on line on the official HELCATS website (https://www.helcats-fp7.eu/catalogues/wp5_cat.html) and included in the propagation tool (http://propagationtool.cdpp.eu). Several transients, known as blobs, are observed entrained in each SIR. We complete this catalogue with the trajectory of individual blobs and with the latitudinal extent of the SIR. For every SIR we report whether the trajectory of any of the entrained blob impacts a spacecraft in the Heliosphere. For the cases where a blob is predicted to impact one or more spacecraft, we include in the catalogue the predicted arrival time and the date and time of the visually recognized blob which is the closest to the predicted arrival time. This new catalogue was also made available on line on the HELCATS project website. This work was made with the funding from the HELCATS project under the FP7 EU contract number 606692.

A catalog of selected compact radio sources for the construction of an extragalactic radio/optical reference frame (Argue et al. 1984): Documentation for the machine-readable version

NASA Technical Reports Server (NTRS)

1990-01-01

This document describes the machine readable version of the Selected Compact Radio Source Catalog as it is currently being distributed from the international network of astronomical data centers. It is intended to enable users to read and process the computerized catalog. The catalog contains 233 strong, compact extragalactic radio sources having identified optical counterparts. The machine version contains the same data as the published catalog and includes source identifications, equatorial positions at J2000.0 and their mean errors, object classifications, visual magnitudes, redshift, 5-GHz flux densities, and comments.

MARC Data, the OPAC, and Library Professionals

ERIC Educational Resources Information Center

Williams, Jo

2009-01-01

Purpose: The purpose of this paper is to show that knowledge of the Machine-Readable Cataloguing (MARC) format is useful in all aspects of librarianship, not just for cataloguing, and how MARC knowledge can address indexing limitations of the online catalogue. Design/methodology/approach: The paper employs examples and scenarios to show the…

C3: A Command-line Catalogue Cross-matching tool for modern astrophysical survey data

NASA Astrophysics Data System (ADS)

Riccio, Giuseppe; Brescia, Massimo; Cavuoti, Stefano; Mercurio, Amata; di Giorgio, Anna Maria; Molinari, Sergio

2017-06-01

In the current data-driven science era, it is needed that data analysis techniques has to quickly evolve to face with data whose dimensions has increased up to the Petabyte scale. In particular, being modern astrophysics based on multi-wavelength data organized into large catalogues, it is crucial that the astronomical catalog cross-matching methods, strongly dependant from the catalogues size, must ensure efficiency, reliability and scalability. Furthermore, multi-band data are archived and reduced in different ways, so that the resulting catalogues may differ each other in formats, resolution, data structure, etc, thus requiring the highest generality of cross-matching features. We present C 3 (Command-line Catalogue Cross-match), a multi-platform application designed to efficiently cross-match massive catalogues from modern surveys. Conceived as a stand-alone command-line process or a module within generic data reduction/analysis pipeline, it provides the maximum flexibility, in terms of portability, configuration, coordinates and cross-matching types, ensuring high performance capabilities by using a multi-core parallel processing paradigm and a sky partitioning algorithm.

Catalogue of isolated emission episodes in gamma-ray bursts from Fermi, Swift and BATSE

NASA Astrophysics Data System (ADS)

Charisi, M.; Márka, S.; Bartos, I.

2015-04-01

We report a comprehensive catalogue of emission episodes within long gamma-ray bursts (GRBs) that are separated by a quiescent period during which gamma-ray emission falls below the background level. We use a fully automated identification method for an unbiased, large-scale and expandable search. We examine a comprehensive sample of long GRBs from the BATSE (Burst and Transient Source Experiment), Swift and Fermi missions, assembling a total searched set of 2710 GRBs, the largest catalogue of isolated emission episodes so far. Our search extends out to [-1000 s, 750 s] around the burst trigger, expanding the covered time interval beyond previous studies and far beyond the nominal durations (T90) of most bursts. We compare our results to previous works by identifying pre-peak emission (or precursors), defined as isolated emission periods prior to the episode with the highest peak luminosity of the burst. We also systematically search for similarly defined periods after the burst's peak emission. We find that the pre-peak and post-peak emission periods are statistically similar, possibly indicating a common origin. For the analysed GRBs, we identify 24 per cent to have more than one isolated emission episode, with 11 per cent having at least one pre-peak event and 15 per cent having at least one post-peak event. We identify GRB activity significantly beyond their T90, which can be important for understanding the central engine activity as well as, e.g. gravitational-wave searches.

Dynamo Catalogue: Geometrical tools and data management for particle picking in subtomogram averaging of cryo-electron tomograms.

PubMed

Castaño-Díez, Daniel; Kudryashev, Mikhail; Stahlberg, Henning

2017-02-01

Cryo electron tomography allows macromolecular complexes within vitrified, intact, thin cells or sections thereof to be visualized, and structural analysis to be performed in situ by averaging over multiple copies of the same molecules. Image processing for subtomogram averaging is specific and cumbersome, due to the large amount of data and its three dimensional nature and anisotropic resolution. Here, we streamline data processing for subtomogram averaging by introducing an archiving system, Dynamo Catalogue. This system manages tomographic data from multiple tomograms and allows visual feedback during all processing steps, including particle picking, extraction, alignment and classification. The file structure of a processing project file structure includes logfiles of performed operations, and can be backed up and shared between users. Command line commands, database queries and a set of GUIs give the user versatile control over the process. Here, we introduce a set of geometric tools that streamline particle picking from simple (filaments, spheres, tubes, vesicles) and complex geometries (arbitrary 2D surfaces, rare instances on proteins with geometric restrictions, and 2D and 3D crystals). Advanced functionality, such as manual alignment and subboxing, is useful when initial templates are generated for alignment and for project customization. Dynamo Catalogue is part of the open source package Dynamo and includes tools to ensure format compatibility with the subtomogram averaging functionalities of other packages, such as Jsubtomo, PyTom, PEET, EMAN2, XMIPP and Relion. Copyright © 2016. Published by Elsevier Inc.

RIS3: A program for relativistic isotope shift calculations

NASA Astrophysics Data System (ADS)

Nazé, C.; Gaidamauskas, E.; Gaigalas, G.; Godefroid, M.; Jönsson, P.

2013-09-01

An atomic spectral line is characteristic of the element producing the spectrum. The line also depends on the isotope. The program RIS3 (Relativistic Isotope Shift) calculates the electron density at the origin and the normal and specific mass shift parameters. Combining these electronic quantities with available nuclear data, isotope-dependent energy level shifts are determined. Program summaryProgram title:RIS3 Catalogue identifier: ADEK_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADEK_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 5147 No. of bytes in distributed program, including test data, etc.: 32869 Distribution format: tar.gz Programming language: Fortran 77. Computer: HP ProLiant BL465c G7 CTO. Operating system: Centos 5.5, which is a Linux distribution compatible with Red Hat Enterprise Advanced Server. Classification: 2.1. Catalogue identifier of previous version: ADEK_v1_0 Journal reference of previous version: Comput. Phys. Comm. 100 (1997) 81 Subprograms used: Cat Id Title Reference ADZL_v1_1 GRASP2K VERSION 1_1 to be published. Does the new version supersede the previous version?: Yes Nature of problem: Prediction of level and transition isotope shifts in atoms using four-component relativistic wave functions. Solution method: The nuclear motion and volume effects are treated in first order perturbation theory. Taking the zero-order wave function in terms of a configuration state expansion |Ψ>=∑μcμ|Φ(γμPJMj)>, where P, J and MJ are, respectively, the parity and angular quantum numbers, the electron density at the nucleus and the normal and specific mass shift parameters may generally be expressed as ∑cμcν<γμPJMj|V|γνPJMj> where V is the relevant operator. The matrix elements, in turn, can be expressed as sums over radial integrals multiplied by angular coefficients. All the angular coefficients are calculated using routines from the GRASP2K version 1_1 package [1]. Reasons for new version: This new version takes the nuclear recoil corrections into account within the (m2/M approximation [2] and also allows storage of the angular coefficients for a series of calculations within a given isoelectronic sequence. Furthermore, the program JJ2LSJ, a module of the GRASP2K version 1_1 toolkit that allows a transformation of ASFs from a jj-coupled CSF basis into an LSJ-coupled CSF basis, has been especially adapted to present RIS3 results using LSJ labels of the states. This additional tool is called RIS3_LSJ. Summary of revisions: This version is compatible with the new angular approach of the GRASP2K version 1_1 package [1] and can store necessary angular coefficients. According to the formalism of the relativistic nuclear recoil, the "uncorrected" expression of the normal mass shift has been fundamentally modified compared with its expression in [3]. Restrictions: The complexity of the cases that can be handled is entirely determined by the GRASP2K package [1] used for the generation of the electronic wave functions. Unusual features: Angular data is stored on disk and can be reused. LSJ labels are used for the states. Running time: As an example, we evaluated the isotope shift parameters and the electron density at the origin using the wave functions of Be-like system. We used the MCDHF wave function built on a complete active space (CAS) with n=8 (296 626 CSFs-62 orbitals) that contains 3 non-interacting blocks of given parity and J values involving 6 different eigenvalues in total. Calculations take around 10 h on one AMD Opteron 6100 @ 2.3 GHz CPU with 8 cores (64 GB DDR3 RAM 1.333 GHz). If angular files are available the time is reduced to 20 min. The storage of the angular data takes 139 MB and 7.2 GB for the one-body and the two-body elements, respectively. References: [1] P. Jönsson, G. Gaigalas, J. Bieroń, C. Froese Fischer, I.P. Grant, New version: GRASP2K relativistic atomic structure package, Comput. Phys. Commun. 184 (9) (2013) 2197-2203. [2] E. Gaidamauskas, C. Nazé, P. Rynkun, G. Gaigalas, P. Jönsson, M. Godefroid, J. Phys. B: At. Mol. Opt. Phys. 44 (17) (2011) 175003. [3] P. Jönsson, C. Froese Fischer, Comput. Phys. Commun. 100 (1997) 81-92.

XtalOpt  version r9: An open-source evolutionary algorithm for crystal structure prediction

DOE PAGES

Falls, Zackary; Lonie, David C.; Avery, Patrick; ...

2015-10-23

This is a new version of XtalOpt, an evolutionary algorithm for crystal structure prediction available for download from the CPC library or the XtalOpt website, http://xtalopt.github.io. XtalOpt is published under the Gnu Public License (GPL), which is an open source license that is recognized by the Open Source Initiative. We have detailed the new version incorporates many bug-fixes and new features here and predict the crystal structure of a system from its stoichiometry alone, using evolutionary algorithms.