Toys for Special Children.

ERIC Educational Resources Information Center

Przybocki, Mary, Ed.; Miller, Stephanie A., Ed.

1984-01-01

The guide presents information on approximately 150 toys useful for infants and children with sensory impairments. The toys listed are available from stores found nation-wide and the list is organized according to age level (infants, toddlers, and elementary levels). A brief description, price, source, and coding of types of skills the toys may…

Clinical code set engineering for reusing EHR data for research: A review.

PubMed

Williams, Richard; Kontopantelis, Evangelos; Buchan, Iain; Peek, Niels

2017-06-01

The construction of reliable, reusable clinical code sets is essential when re-using Electronic Health Record (EHR) data for research. Yet code set definitions are rarely transparent and their sharing is almost non-existent. There is a lack of methodological standards for the management (construction, sharing, revision and reuse) of clinical code sets which needs to be addressed to ensure the reliability and credibility of studies which use code sets. To review methodological literature on the management of sets of clinical codes used in research on clinical databases and to provide a list of best practice recommendations for future studies and software tools. We performed an exhaustive search for methodological papers about clinical code set engineering for re-using EHR data in research. This was supplemented with papers identified by snowball sampling. In addition, a list of e-phenotyping systems was constructed by merging references from several systematic reviews on this topic, and the processes adopted by those systems for code set management was reviewed. Thirty methodological papers were reviewed. Common approaches included: creating an initial list of synonyms for the condition of interest (n=20); making use of the hierarchical nature of coding terminologies during searching (n=23); reviewing sets with clinician input (n=20); and reusing and updating an existing code set (n=20). Several open source software tools (n=3) were discovered. There is a need for software tools that enable users to easily and quickly create, revise, extend, review and share code sets and we provide a list of recommendations for their design and implementation. Research re-using EHR data could be improved through the further development, more widespread use and routine reporting of the methods by which clinical codes were selected. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

46 CFR 56.60-2 - Limitations on materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Boiler and Pressure Vessel Code * ASTM specifications Source of allowable stress Notes Ferrous Materials...-5. 2 Allowable stresses shall be the same as those listed in UCS23 of section VIII of the ASME.... 4 Allowable stresses shall be the same as those listed in UCS23 of section VIII of the ASME Boiler...

46 CFR 56.60-2 - Limitations on materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Boiler and Pressure Vessel Code * ASTM specifications Source of allowable stress Notes Ferrous Materials...-5. 2 Allowable stresses shall be the same as those listed in UCS23 of section VIII of the ASME.... 4 Allowable stresses shall be the same as those listed in UCS23 of section VIII of the ASME Boiler...

PARAVT: Parallel Voronoi tessellation code

NASA Astrophysics Data System (ADS)

González, R. E.

2016-10-01

In this study, we present a new open source code for massive parallel computation of Voronoi tessellations (VT hereafter) in large data sets. The code is focused for astrophysical purposes where VT densities and neighbors are widely used. There are several serial Voronoi tessellation codes, however no open source and parallel implementations are available to handle the large number of particles/galaxies in current N-body simulations and sky surveys. Parallelization is implemented under MPI and VT using Qhull library. Domain decomposition takes into account consistent boundary computation between tasks, and includes periodic conditions. In addition, the code computes neighbors list, Voronoi density, Voronoi cell volume, density gradient for each particle, and densities on a regular grid. Code implementation and user guide are publicly available at https://github.com/regonzar/paravt.

NSSDC Data listing

NASA Technical Reports Server (NTRS)

1981-01-01

A convenient reference to space science and supportive data available from the National Space Science Data Center (NSSDC) is provided. Satellite data are organized by NSSDC spacecraft common name. The launch date and NSSDC ID are given. Experiments are listed alphabetically by the principal investigator or team leader. The experiment name and NSSDC ID, data set ID, data set name, data form code, quantity of data, and the time span of the data as verified by NSSDC are shown. Ground-based data, models, computer routines, and composite spacecraft data that are available from NSSDC are listed alphabetically by discipline, source, data type, data content, and data set. The data set name, data form code, quantity of data, and the time span covered where appropriate are included.

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKisson, John

The source code for the Java Data Acquisition suite provides interfaces to the JLab built USB FPGA ADC across a LAN network. Each jDaq node provides ListMode data from JLab built detector systems and readouts.

A supersonic three-dimensional code for flow over blunt bodies: Program documentation and test cases

NASA Technical Reports Server (NTRS)

Chaussee, D. S.; Mcmillan, O. J.

1980-01-01

The use of a computer code for the calculation of steady, supersonic, three dimensional, inviscid flow over blunt bodies is illustrated. Input and output are given and explained for two cases: a pointed code of 20 deg half angle at 15 deg angle of attack in a free stream with M sub infinite = 7, and a cone-ogive-cylinder at 10 deg angle of attack with M sub infinite = 2.86. A source listing of the computer code is provided.

15 CFR 740.17 - Encryption commodities, software and technology (ENC).

Code of Federal Regulations, 2011 CFR

2011-01-01

... classified under ECCN 5B002, and equivalent or related software and technology classified under ECCNs 5D002... service in any country listed in Country Group E:1 in supplement No. 1 to part 740 of the EAR, or release of source code or technology to any national of a country listed in Country Group E:1. Reexports and...

Software on the Peregrine System | High-Performance Computing | NREL

Science.gov Websites

. Development Tools View list of tools for build automation, version control, and high-level or specialized scripting. Toolchains Learn about the available toolchains to build applications from source code

FEMFLOW3D; a finite-element program for the simulation of three-dimensional aquifers; version 1.0

USGS Publications Warehouse

Durbin, Timothy J.; Bond, Linda D.

1998-01-01

This document also includes model validation, source code, and example input and output files. Model validation was performed using four test problems. For each test problem, the results of a model simulation with FEMFLOW3D were compared with either an analytic solution or the results of an independent numerical approach. The source code, written in the ANSI x3.9-1978 FORTRAN standard, and the complete input and output of an example problem are listed in the appendixes.

Calculation of two-dimensional inlet flow fields in a supersonic free stream: Program documentation and test cases

NASA Technical Reports Server (NTRS)

Biringen, S. H.; Mcmillan, O. J.

1980-01-01

The use of a computer code for the calculation of two dimensional inlet flow fields in a supersonic free stream and a nonorthogonal mesh-generation code are illustrated by specific examples. Input, output, and program operation and use are given and explained for the case of supercritical inlet operation at a subdesign Mach number (M Mach free stream = 2.09) for an isentropic-compression, drooped-cowl inlet. Source listings of the computer codes are also provided.

Plant identification credibility in ethnobotany: a closer look at Polish ethnographic studies

PubMed Central

2010-01-01

Background This paper is an attempt to estimate the percentage of erroneously identified taxa in ethnographic studies concerning the use of plants and to propose a code for recording credibility of identification in historical ethnobotany publications. Methods A sample of Polish-language ethnobotanical literature (45 published sources from 1874-2005) and four collections of voucher specimens (from 1894-1975) were analyzed. Errors were detected in the publications by comparing the data with existing knowledge on the distribution of plant names and species ranges. The voucher specimens were re-examined. A one-letter code was invented for quick identification of the credibility of data published in lists of species compiled from historical or ethnographic sources, according to the source of identification: voucher specimen, Latin binominal, botanical expert, obvious widespread name, folk name, mode of use, range, physical description or photograph. To test the use of the code an up-to-date list of wild food plants used in Poland was made. Results A significant difference between the ratio of mistakes in the voucher specimen collections and the ratio of detectable mistakes in the studies without herbarium documentation was found. At least 2.3% of taxa in the publications were identified erroneously (mean rate was 6.2% per publication), and in half of these mistakes even the genus was not correct. As many as 10.0% of voucher specimens (on average 9.2% per collection) were originally erroneously identified, but three quarters of the identification mistakes remained within-genus. The species of the genera Thymus, Rumex and Rubus were most often confused within the genus. Not all of the invented credibility codes were used in the list of wild food plants, but they may be useful for other researchers. The most often used codes were the ones signifying identification by: voucher specimen, botanical expert and by a common name used throughout the country. Conclusions The results of this study support the rigorous use of voucher specimens in ethnobotany, although they also reveal a relatively high percentage of misidentified taxa in the specimens studied. The invented credibility coding system may become a useful tool for communication between historical ethnobotanists, particularly in creating larger databases. PMID:21167056

JSC document index

NASA Technical Reports Server (NTRS)

1988-01-01

The Johnson Space Center (JSC) document index is intended to provide a single source listing of all published JSC-numbered documents their authors, and the designated offices of prime responsibility (OPR's) by mail code at the time of publication. The index contains documents which have been received and processed by the JSC Technical Library as of January 13, 1988. Other JSC-numbered documents which are controlled but not available through the JSC Library are also listed.

Mining Program Source Code for Improving Software Quality

DTIC Science & Technology

2013-01-01

conduct static verification on the software application under analysis to detect defects around APIs. (a) Papers published in peer-reviewed journals...N/A for none) Enter List of papers submitted or published that acknowledge ARO support from the start of the project to the date of this printing...List the papers , including journal references, in the following categories: Received Paper 05/06/2013 21.00 Tao Xie, Suresh Thummalapenta, David Lo

Text File Comparator

NASA Technical Reports Server (NTRS)

Kotler, R. S.

1983-01-01

File Comparator program IFCOMP, is text file comparator for IBM OS/VScompatable systems. IFCOMP accepts as input two text files and produces listing of differences in pseudo-update form. IFCOMP is very useful in monitoring changes made to software at the source code level.

Robustness of Feedback Systems with Several Modelling Errors

DTIC Science & Technology

1990-06-01

Patterson AFB, OH 45433-6553 to help us maintain a current mailing list. Copies of this report should not be returned unless return is required by security...Wright Research (If applicable) and Development Center WRDC/FIGC F33615-88-C-3601 8c. ADDRESS (City, State, and ZIP Code) 10. SOURCE OF FUNDING NUMBERS...feedback systems with several sources of modelling uncertainty. We assume that each source of uncertainty is modelled as a stable unstructured

TEA: A Code Calculating Thermochemical Equilibrium Abundances

NASA Astrophysics Data System (ADS)

Blecic, Jasmina; Harrington, Joseph; Bowman, M. Oliver

2016-07-01

We present an open-source Thermochemical Equilibrium Abundances (TEA) code that calculates the abundances of gaseous molecular species. The code is based on the methodology of White et al. and Eriksson. It applies Gibbs free-energy minimization using an iterative, Lagrangian optimization scheme. Given elemental abundances, TEA calculates molecular abundances for a particular temperature and pressure or a list of temperature-pressure pairs. We tested the code against the method of Burrows & Sharp, the free thermochemical equilibrium code Chemical Equilibrium with Applications (CEA), and the example given by Burrows & Sharp. Using their thermodynamic data, TEA reproduces their final abundances, but with higher precision. We also applied the TEA abundance calculations to models of several hot-Jupiter exoplanets, producing expected results. TEA is written in Python in a modular format. There is a start guide, a user manual, and a code document in addition to this theory paper. TEA is available under a reproducible-research, open-source license via https://github.com/dzesmin/TEA.

TEA: A CODE CALCULATING THERMOCHEMICAL EQUILIBRIUM ABUNDANCES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blecic, Jasmina; Harrington, Joseph; Bowman, M. Oliver, E-mail: jasmina@physics.ucf.edu

2016-07-01

We present an open-source Thermochemical Equilibrium Abundances (TEA) code that calculates the abundances of gaseous molecular species. The code is based on the methodology of White et al. and Eriksson. It applies Gibbs free-energy minimization using an iterative, Lagrangian optimization scheme. Given elemental abundances, TEA calculates molecular abundances for a particular temperature and pressure or a list of temperature–pressure pairs. We tested the code against the method of Burrows and Sharp, the free thermochemical equilibrium code Chemical Equilibrium with Applications (CEA), and the example given by Burrows and Sharp. Using their thermodynamic data, TEA reproduces their final abundances, but withmore » higher precision. We also applied the TEA abundance calculations to models of several hot-Jupiter exoplanets, producing expected results. TEA is written in Python in a modular format. There is a start guide, a user manual, and a code document in addition to this theory paper. TEA is available under a reproducible-research, open-source license via https://github.com/dzesmin/TEA.« less

Hazardous Waste Handling Should be Defined

ERIC Educational Resources Information Center

Steigman, Harry

1972-01-01

An examination of the handling, storage and disposition of hazardous wastes from municipal and industrial sources, with a plea for the development of a uniform national hazardous waste code or listing that would be acceptable and useful to all state and federal agencies. (LK)

Bayesian Atmospheric Radiative Transfer (BART)Thermochemical Equilibrium Abundance (TEA) Code and Application to WASP-43b

NASA Astrophysics Data System (ADS)

Blecic, Jasmina; Harrington, Joseph; Bowman, Matthew O.; Cubillos, Patricio E.; Stemm, Madison; Foster, Andrew

2014-11-01

We present a new, open-source, Thermochemical Equilibrium Abundances (TEA) code that calculates the abundances of gaseous molecular species. TEA uses the Gibbs-free-energy minimization method with an iterative Lagrangian optimization scheme. It initializes the radiative-transfer calculation in our Bayesian Atmospheric Radiative Transfer (BART) code. Given elemental abundances, TEA calculates molecular abundances for a particular temperature and pressure or a list of temperature-pressure pairs. The code is tested against the original method developed by White at al. (1958), the analytic method developed by Burrows and Sharp (1999), and the Newton-Raphson method implemented in the open-source Chemical Equilibrium with Applications (CEA) code. TEA is written in Python and is available to the community via the open-source development site GitHub.com. We also present BART applied to eclipse depths of WASP-43b exoplanet, constraining atmospheric thermal and chemical parameters. This work was supported by NASA Planetary Atmospheres grant NNX12AI69G and NASA Astrophysics Data Analysis Program grant NNX13AF38G. JB holds a NASA Earth and Space Science Fellowship.

Concordance of Commercial Data Sources for Neighborhood-Effects Studies

PubMed Central

Schootman, Mario

2010-01-01

Growing evidence supports a relationship between neighborhood-level characteristics and important health outcomes. One source of neighborhood data includes commercial databases integrated with geographic information systems to measure availability of certain types of businesses or destinations that may have either favorable or adverse effects on health outcomes; however, the quality of these data sources is generally unknown. This study assessed the concordance of two commercial databases for ascertaining the presence, locations, and characteristics of businesses. Businesses in the St. Louis, Missouri area were selected based on their four-digit Standard Industrial Classification (SIC) codes and classified into 14 business categories. Business listings in the two commercial databases were matched by standardized business name within specified distances. Concordance and coverage measures were calculated using capture–recapture methods for all businesses and by business type, with further stratification by census-tract-level population density, percent below poverty, and racial composition. For matched listings, distance between listings and agreement in four-digit SIC code, sales volume, and employee size were calculated. Overall, the percent agreement was 32% between the databases. Concordance and coverage estimates were lowest for health-care facilities and leisure/entertainment businesses; highest for popular walking destinations, eating places, and alcohol/tobacco establishments; and varied somewhat by population density. The mean distance (SD) between matched listings was 108.2 (179.0) m with varying levels of agreement in four-digit SIC (percent agreement = 84.6%), employee size (weighted kappa = 0.63), and sales volume (weighted kappa = 0.04). Researchers should cautiously interpret findings when using these commercial databases to yield measures of the neighborhood environment. PMID:20480397

The Directory of Special Opportunities for Women: A National Guide of Educational Opportunities, Career Information, Networks, and Peer Counseling Assistance for Entry or Reentry into the Work Force.

ERIC Educational Resources Information Center

Doss, Martha Merrill, Ed.

This directory is designed to be a source for research and help to women preparing for careers or for entry or reentry into the work force. Section One is an alphabetical listing of national organizations, associations, programs, and government agencies. Section Two is divided by State; resources cited here are listed numerically by zip code so…

Polar Coding with CRC-Aided List Decoding

DTIC Science & Technology

2015-08-01

TECHNICAL REPORT 2087 August 2015 Polar Coding with CRC-Aided List Decoding David Wasserman Approved...list decoding . RESULTS Our simulation results show that polar coding can produce results very similar to the FEC used in the Digital Video...standard. RECOMMENDATIONS In any application for which the DVB-S2 FEC is considered, polar coding with CRC-aided list decod - ing with N = 65536

48 CFR 52.227-20 - Rights in Data-SBIR Program.

Code of Federal Regulations, 2011 CFR

2011-10-01

... series of operations; and (ii) Recorded information comprising source code listings, design details...) Means (i) Computer programs that comprise a series of instructions, rules, routines, or statements... small business innovation research contract issued under the authority of 15 U.S.C. 638, which data are...

48 CFR 52.227-20 - Rights in Data-SBIR Program.

Code of Federal Regulations, 2010 CFR

2010-10-01

... series of operations; and (ii) Recorded information comprising source code listings, design details...) Means (i) Computer programs that comprise a series of instructions, rules, routines, or statements... small business innovation research contract issued under the authority of 15 U.S.C. 638, which data are...

48 CFR 52.227-20 - Rights in Data-SBIR Program.

Code of Federal Regulations, 2013 CFR

2013-10-01

... series of operations; and (ii) Recorded information comprising source code listings, design details...) Means (i) Computer programs that comprise a series of instructions, rules, routines, or statements... small business innovation research contract issued under the authority of 15 U.S.C. 638, which data are...

48 CFR 52.227-20 - Rights in Data-SBIR Program.

Code of Federal Regulations, 2012 CFR

2012-10-01

... series of operations; and (ii) Recorded information comprising source code listings, design details...) Means (i) Computer programs that comprise a series of instructions, rules, routines, or statements... small business innovation research contract issued under the authority of 15 U.S.C. 638, which data are...

48 CFR 52.227-20 - Rights in Data-SBIR Program.

Code of Federal Regulations, 2014 CFR

2014-10-01

... series of operations; and (ii) Recorded information comprising source code listings, design details...) Means (i) Computer programs that comprise a series of instructions, rules, routines, or statements... small business innovation research contract issued under the authority of 15 U.S.C. 638, which data are...

15 CFR 743.1 - Wassenaar Arrangement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... exports of certain commodities, software and technology controlled under the Wassenaar Arrangement. Such...). Note that exports of technology and source code under License Exception TSR to foreign nationals... 2B001.b.2) of the Commerce Control List (CCL). Reports for 2E001, are for “technology” according to the...

What To Do When the Micro Fails.

ERIC Educational Resources Information Center

Corwin, John K.; Sandiford, Janice R.

This brief description of the microcomputer service and maintenance system at Miami Dade Community College/North includes a series of hints, tips, and lists of information sources, suppliers, and regulatory codes that could prove helpful to school districts that wish to conduct on-site repair of computers. These include: (1) cleaning materials…

SeisCode: A seismological software repository for discovery and collaboration

NASA Astrophysics Data System (ADS)

Trabant, C.; Reyes, C. G.; Clark, A.; Karstens, R.

2012-12-01

SeisCode is a community repository for software used in seismological and related fields. The repository is intended to increase discoverability of such software and to provide a long-term home for software projects. Other places exist where seismological software may be found, but none meet the requirements necessary for an always current, easy to search, well documented, and citable resource for projects. Organizations such as IRIS, ORFEUS, and the USGS have websites with lists of available or contributed seismological software. Since the authors themselves do often not maintain these lists, the documentation often consists of a sentence or paragraph, and the available software may be outdated. Repositories such as GoogleCode and SourceForge, which are directly maintained by the authors, provide version control and issue tracking but do not provide a unified way of locating geophysical software scattered in and among countless unrelated projects. Additionally, projects are hosted at language-specific sites such as Mathworks and PyPI, in FTP directories, and in websites strewn across the Web. Search engines are only partially effective discovery tools, as the desired software is often hidden deep within the results. SeisCode provides software authors a place to present their software, codes, scripts, tutorials, and examples to the seismological community. Authors can choose their own level of involvement. At one end of the spectrum, the author might simply create a web page that points to an existing site. At the other extreme, an author may choose to leverage the many tools provided by SeisCode, such as a source code management tool with integrated issue tracking, forums, news feeds, downloads, wikis, and more. For software development projects with multiple authors, SeisCode can also be used as a central site for collaboration. SeisCode provides the community with an easy way to discover software, while providing authors a way to build a community around their software packages. IRIS invites the seismological community to browse and to submit projects to https://seiscode.iris.washington.edu/

Documentation of a graphical display program for the saturated- unsaturated transport (SUTRA) finite-element simulation model

USGS Publications Warehouse

Souza, W.R.

1987-01-01

This report documents a graphical display program for the U. S. Geological Survey finite-element groundwater flow and solute transport model. Graphic features of the program, SUTRA-PLOT (SUTRA-PLOT = saturated/unsaturated transport), include: (1) plots of the finite-element mesh, (2) velocity vector plots, (3) contour plots of pressure, solute concentration, temperature, or saturation, and (4) a finite-element interpolator for gridding data prior to contouring. SUTRA-PLOT is written in FORTRAN 77 on a PRIME 750 computer system, and requires Version 9.0 or higher of the DISSPLA graphics library. The program requires two input files: the SUTRA input data list and the SUTRA simulation output listing. The program is menu driven and specifications for individual types of plots are entered and may be edited interactively. Installation instruction, a source code listing, and a description of the computer code are given. Six examples of plotting applications are used to demonstrate various features of the plotting program. (Author 's abstract)

The NATA code; theory and analysis. Volume 3: Programmer's manual. [for calculating flow in arc-heated wind tunnels and conditions on models tested in reentry simulation

NASA Technical Reports Server (NTRS)

Bade, W. L.; Yos, J. M.

1975-01-01

The present, third volume of the final report is a programmer's manual for the code. It provides a listing of the FORTRAN 4 source program; a complete glossary of FORTRAN symbols; a discussion of the purpose and method of operation of each subroutine (including mathematical analyses of special algorithms); and a discussion of the operation of the code on IBM/360 and UNIVAC 1108 systems, including required control cards and the overlay structure used to accommodate the code to the limited core size of the 1108. In addition, similar information is provided to document the programming of the NOZFIT code, which is employed to set up nozzle profile curvefits for use in NATA.

Automated verification of flight software. User's manual

NASA Technical Reports Server (NTRS)

Saib, S. H.

1982-01-01

(Automated Verification of Flight Software), a collection of tools for analyzing source programs written in FORTRAN and AED is documented. The quality and the reliability of flight software are improved by: (1) indented listings of source programs, (2) static analysis to detect inconsistencies in the use of variables and parameters, (3) automated documentation, (4) instrumentation of source code, (5) retesting guidance, (6) analysis of assertions, (7) symbolic execution, (8) generation of verification conditions, and (9) simplification of verification conditions. Use of AVFS in the verification of flight software is described.

Development of Alabama Resources Information System (ARIS)

NASA Technical Reports Server (NTRS)

Herring, B. E.; Vachon, R. I.

1976-01-01

A formal, organized set of information concerning the development status of the Alabama Resources Information System (ARIS) as of September 1976 is provided. A series of computer source language programs, and flow charts related to each of the computer programs to provide greater ease in performing future change are presented. Listings of the variable names, and their meanings, used in the various source code programs, and copies of the various user manuals which were prepared through this time are given.

The TORSED method for construction of TORT boundary sources from external DORT flux files

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rhoades, W.A.

1993-08-01

The TORSED method provides a means of coupling cylindrical two-dimensional DORT fluxes or fluences to a three-dimensional TORT calculation in Cartesian geometry through construction of external boundary sources for TORT. This can be important for several reasons. The two-dimensional environment may be too large for TORT simulation. The two-dimensional environment may be truly cylindrical in nature, and thus, better treated in that geometry. It may be desired to use a single environment calculation to study numerous local perturbations. In Section I the TORSED code is described in detail and the diverse demonstration problems that accompany the code distribution are discussed.more » In Section II, an updated discussion of the VISA code is given. VISA is required to preprocess the DORT files for use in TORSED. In Section III, the references are listed.« less

Coding of adverse events of suicidality in clinical study reports of duloxetine for the treatment of major depressive disorder: descriptive study

PubMed Central

Tendal, Britta; Hróbjartsson, Asbjørn; Lundh, Andreas; Gøtzsche, Peter C

2014-01-01

Objective To assess the effects of coding and coding conventions on summaries and tabulations of adverse events data on suicidality within clinical study reports. Design Systematic electronic search for adverse events of suicidality in tables, narratives, and listings of adverse events in individual patients within clinical study reports. Where possible, for each event we extracted the original term reported by the investigator, the term as coded by the medical coding dictionary, medical coding dictionary used, and the patient’s trial identification number. Using the patient’s trial identification number, we attempted to reconcile data on the same event between the different formats for presenting data on adverse events within the clinical study report. Setting 9 randomised placebo controlled trials of duloxetine for major depressive disorder submitted to the European Medicines Agency for marketing approval. Data sources Clinical study reports obtained from the EMA in 2011. Results Six trials used the medical coding dictionary COSTART (Coding Symbols for a Thesaurus of Adverse Reaction Terms) and three used MedDRA (Medical Dictionary for Regulatory Activities). Suicides were clearly identifiable in all formats of adverse event data in clinical study reports. Suicide attempts presented in tables included both definitive and provisional diagnoses. Suicidal ideation and preparatory behaviour were obscured in some tables owing to the lack of specificity of the medical coding dictionary, especially COSTART. Furthermore, we found one event of suicidal ideation described in narrative text that was absent from tables and adverse event listings of individual patients. The reason for this is unclear, but may be due to the coding conventions used. Conclusion Data on adverse events in tables in clinical study reports may not accurately represent the underlying patient data because of the medical dictionaries and coding conventions used. In clinical study reports, the listings of adverse events for individual patients and narratives of adverse events can provide additional information, including original investigator reported adverse event terms, which can enable a more accurate estimate of harms. PMID:24899651

Open source tools and toolkits for bioinformatics: significance, and where are we?

PubMed

Stajich, Jason E; Lapp, Hilmar

2006-09-01

This review summarizes important work in open-source bioinformatics software that has occurred over the past couple of years. The survey is intended to illustrate how programs and toolkits whose source code has been developed or released under an Open Source license have changed informatics-heavy areas of life science research. Rather than creating a comprehensive list of all tools developed over the last 2-3 years, we use a few selected projects encompassing toolkit libraries, analysis tools, data analysis environments and interoperability standards to show how freely available and modifiable open-source software can serve as the foundation for building important applications, analysis workflows and resources.

Automated conserved non-coding sequence (CNS) discovery reveals differences in gene content and promoter evolution among grasses

PubMed Central

Turco, Gina; Schnable, James C.; Pedersen, Brent; Freeling, Michael

2013-01-01

Conserved non-coding sequences (CNS) are islands of non-coding sequence that, like protein coding exons, show less divergence in sequence between related species than functionless DNA. Several CNSs have been demonstrated experimentally to function as cis-regulatory regions. However, the specific functions of most CNSs remain unknown. Previous searches for CNS in plants have either anchored on exons and only identified nearby sequences or required years of painstaking manual annotation. Here we present an open source tool that can accurately identify CNSs between any two related species with sequenced genomes, including both those immediately adjacent to exons and distal sequences separated by >12 kb of non-coding sequence. We have used this tool to characterize new motifs, associate CNSs with additional functions, and identify previously undetected genes encoding RNA and protein in the genomes of five grass species. We provide a list of 15,363 orthologous CNSs conserved across all grasses tested. We were also able to identify regulatory sequences present in the common ancestor of grasses that have been lost in one or more extant grass lineages. Lists of orthologous gene pairs and associated CNSs are provided for reference inbred lines of arabidopsis, Japonica rice, foxtail millet, sorghum, brachypodium, and maize. PMID:23874343

Variation in clinical coding lists in UK general practice: a barrier to consistent data entry?

PubMed

Tai, Tracy Waize; Anandarajah, Sobanna; Dhoul, Neil; de Lusignan, Simon

2007-01-01

Routinely collected general practice computer data are used for quality improvement; poor data quality including inconsistent coding can reduce their usefulness. To document the diversity of data entry systems currently in use in UK general practice and highlight possible implications for data quality. General practice volunteers provided screen shots of the clinical coding screen they would use to code a diagnosis or problem title in the clinical consultation. The six clinical conditions examined were: depression, cystitis, type 2 diabetes mellitus, sore throat, tired all the time, and myocardial infarction. We looked at the picking lists generated for these problem titles in EMIS, IPS, GPASS and iSOFT general practice clinical computer systems, using the Triset browser as a gold standard for comparison. A mean of 19.3 codes is offered in the picking list after entering a diagnosis or problem title. EMIS produced the longest picking lists and GPASS the shortest, with a mean number of choices of 35.2 and 12.7, respectively. Approximately three-quarters (73.5%) of codes are diagnoses, one-eighth (12.5%) symptom codes, and the remainder come from a range of Read chapters. There was no readily detectable consistent order in which codes were displayed. Velocity coding, whereby commonly-used codes are placed higher in the picking list, results in variation between practices even where they have the same brand of computer system. Current systems for clinical coding promote diversity rather than consistency of clinical coding. As the UK moves towards an integrated health IT system consistency of coding will become more important. A standardised, limited list of codes for primary care might help address this need.

TANDEM: matching proteins with tandem mass spectra.

PubMed

Craig, Robertson; Beavis, Ronald C

2004-06-12

Tandem mass spectra obtained from fragmenting peptide ions contain some peptide sequence specific information, but often there is not enough information to sequence the original peptide completely. Several proprietary software applications have been developed to attempt to match the spectra with a list of protein sequences that may contain the sequence of the peptide. The application TANDEM was written to provide the proteomics research community with a set of components that can be used to test new methods and algorithms for performing this type of sequence-to-data matching. The source code and binaries for this software are available at http://www.proteome.ca/opensource.html, for Windows, Linux and Macintosh OSX. The source code is made available under the Artistic License, from the authors.

76 FR 29609 - Wassenaar Arrangement 2010 Plenary Agreements Implementation: Commerce Control List, Definitions...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... apply to computers specially designed for ``civil aircraft'' applications to prevent this control from... section. Adding a new paragraph 5D002.d to control ``software'' designed or modified to enable an item to... 6D003.f.3 and f.4 to control ``software'' and ``source code,'' specially designed for ``real time...

Energy information data base: report number codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1979-09-01

Each report processed by the US DOE Technical Information Center is identified by a unique report number consisting of a code plus a sequential number. In most cases, the code identifies the originating installation. In some cases, it identifies a specific program or a type of publication. Listed in this publication are all codes that have been used by DOE in cataloging reports. This compilation consists of two parts. Part I is an alphabetical listing of report codes identified with the issuing installations that have used the codes. Part II is an alphabetical listing of installations identified with codes eachmore » has used. (RWR)« less

The identification of incident cancers in UK primary care databases: a systematic review.

PubMed

Rañopa, Michael; Douglas, Ian; van Staa, Tjeerd; Smeeth, Liam; Klungel, Olaf; Reynolds, Robert; Bhaskaran, Krishnan

2015-01-01

UK primary care databases are frequently used in observational studies with cancer outcomes. We aimed to systematically review methods used by such studies to identify and validate incident cancers of the breast, colorectum, and prostate. Medline and Embase (1980-2013) were searched for UK primary care database studies with incident breast, colorectal, or prostate cancer outcomes. Data on the methods used for case ascertainment were extracted and summarised. Questionnaires were sent to corresponding authors to obtain details about case ascertainment. Eighty-four studies of breast (n = 51), colorectal (n = 54), and prostate cancer (n = 31) were identified; 30 examined >1 cancer type. Among the 84 studies, 57 defined cancers using only diagnosis codes, while 27 required further evidence such as chemotherapy. Few studies described methods used to create cancer code lists (n = 5); or made lists available directly (n = 5). Twenty-eight code lists were received on request from study authors. All included malignant neoplasm diagnosis codes, but there was considerable variation in the specific codes included which was not explained by coding dictionary changes. Code lists also varied in terms of other types of codes included, such as in-situ, cancer morphology, history of cancer, and secondary/suspected/borderline cancer codes. In UK primary care database studies, methods for identifying breast, colorectal, and prostate cancers were often unclear. Code lists were often unavailable, and where provided, we observed variation in the individual codes and types of codes included. Clearer reporting of methods and publication of code lists would improve transparency and reproducibility of studies. Copyright © 2014 John Wiley & Sons, Ltd.

Oil and gas field code master list, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This document contains data collected through October 1993 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. Other Federal and State government agencies, as well as industry, use the EIA Oil and Gas Field Code Master List as the standard for field identification. A machine-readable version of the Oil and Gas Field Code Master List is available from the National Technical Information Service.

Information quality measurement of medical encoding support based on usability.

PubMed

Puentes, John; Montagner, Julien; Lecornu, Laurent; Cauvin, Jean-Michel

2013-12-01

Medical encoding support systems for diagnoses and medical procedures are an emerging technology that begins to play a key role in billing, reimbursement, and health policies decisions. A significant problem to exploit these systems is how to measure the appropriateness of any automatically generated list of codes, in terms of fitness for use, i.e. their quality. Until now, only information retrieval performance measurements have been applied to estimate the accuracy of codes lists as quality indicator. Such measurements do not give the value of codes lists for practical medical encoding, and cannot be used to globally compare the quality of multiple codes lists. This paper defines and validates a new encoding information quality measure that addresses the problem of measuring medical codes lists quality. It is based on a usability study of how expert coders and physicians apply computer-assisted medical encoding. The proposed measure, named ADN, evaluates codes Accuracy, Dispersion and Noise, and is adapted to the variable length and content of generated codes lists, coping with limitations of previous measures. According to the ADN measure, the information quality of a codes list is fully represented by a single point, within a suitably constrained feature space. Using one scheme, our approach is reliable to measure and compare the information quality of hundreds of codes lists, showing their practical value for medical encoding. Its pertinence is demonstrated by simulation and application to real data corresponding to 502 inpatient stays in four clinic departments. Results are compared to the consensus of three expert coders who also coded this anonymized database of discharge summaries, and to five information retrieval measures. Information quality assessment applying the ADN measure showed the degree of encoding-support system variability from one clinic department to another, providing a global evaluation of quality measurement trends. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

NASA directives master list and index

NASA Technical Reports Server (NTRS)

1993-01-01

This Handbook sets forth in two parts the following information for the guidance of users of the NASA Management Directives System. Part A is a master list of management directives in force as of March 31, 1993. Chapter 1 contains introductory informative material on how to use this Handbook. Chapter 2 is a complete master list of Agencywide management directives, describing each directive by type, number, effective date, expiration date, title, and organization code of the office responsible for the directive. Chapter 3 includes a consolidated numerical list of all delegations of authority and a breakdown of such delegation by the office or installation to which special authority is assigned. Chapter 4 sets forth a consolidated list of all NASA Handbooks (NHB's) and important footnotes covering the control and ordering of such documents. Chapter 5 is a consolidated list of NASA management directives applicable to the Jet Propulsion Laboratory. Chapter 6 is a consolidated list of NASA management directives published in the Code of Federal Regulations. Complementary manuals to the NASA Management Directives System are described in Chapter 7. Part B is the index to NASA management directives in force as of March 31, 1993. This part contains an in-depth alphabetical index to all NASA management directives other than Handbooks. NHB's 1610.6, 'NASA Personnel Security Handbook,' 1620.3, 'NASA Physical Security Handbook,' 1640.4, 'NASA Information Security Program,' 1900.1, 'Standards of Conduct for NASA Employees,' 5103.6, 'Source Evaluation Board Handbook,' and 7400.1, 'Budget Administration Manual,' are indexed in-depth. All other NHB's are indexed by titles only.

VizieR Online Data Catalog: Blazars in the Swift-BAT hard X-ray sky (Maselli+, 2010)

NASA Astrophysics Data System (ADS)

Maselli, A.; Cusumano, G.; Massaro, E.; La Parola, V.; Segreto, A.; Sbarufatti, B.

2010-06-01

We reported the list of hard X-ray blazars obtained adopting sigma=3 as detection threshold: with this choice a number of three spurious sources over a total of 121 blazars is expected. Each blazar is identified by a three-letter code, where the first two are BZ for blazar and the third one specifies the type, followed by the truncated equatorial coordinates (J2000). The codes are defined in the "Note (1)" below. We obtained 69 FSRQs, 24 BL Lac objects and 28 blazars of uncertain classification, representing 4.4%, 2.4% and 11.0% of the corresponding populations classified in the BZCAT, respectively. This sample has been compared with other lists and catalogues found in literature (Tueller et al., 2010, Cat. J/ApJS/186/378, Ajello et al. 2009ApJ...699..603A, Cusumano et al., 2010, Cat. J/A+A/510/A48). (1 data file).

A users' guide to the trace contaminant control simulation computer program

NASA Technical Reports Server (NTRS)

Perry, J. L.

1994-01-01

The Trace Contaminant Control Simulation computer program is a tool for assessing the performance of various trace contaminant control technologies for removing trace chemical contamination from a spacecraft cabin atmosphere. The results obtained from the program can be useful in assessing different technology combinations, system sizing, system location with respect to other life support systems, and the overall life cycle economics of a trace contaminant control system. The user's manual is extracted in its entirety from NASA TM-108409 to provide a stand-alone reference for using any version of the program. The first publication of the manual as part of TM-108409 also included a detailed listing of version 8.0 of the program. As changes to the code were necessary, it became apparent that the user's manual should be separate from the computer code documentation and be general enough to provide guidance in using any version of the program. Provided in the guide are tips for input file preparation, general program execution, and output file manipulation. Information concerning source code listings of the latest version of the computer program may be obtained by contacting the author.

Lessons learned from a pilot implementation of the UMLS information sources map.

PubMed

Miller, P L; Frawley, S J; Wright, L; Roderer, N K; Powsner, S M

1995-01-01

To explore the software design issues involved in implementing an operational information sources map (ISM) knowledge base (KB) and system of navigational tools that can help medical users access network-based information sources relevant to a biomedical question. A pilot biomedical ISM KB and associated client-server software (ISM/Explorer) have been developed to help students, clinicians, researchers, and staff access network-based information sources, as part of the National Library of Medicine's (NLM) multi-institutional Unified Medical Language System (UMLS) project. The system allows the user to specify and constrain a search for a biomedical question of interest. The system then returns a list of sources matching the search. At this point the user may request 1) further information about a source, 2) that the list of sources be regrouped by different criteria to allow the user to get a better overall appreciation of the set of retrieved sources as a whole, or 3) automatic connection to a source. The pilot system operates in client-server mode and currently contains coded information for 121 sources. It is in routine use from approximately 40 workstations at the Yale School of Medicine. The lessons that have been learned are that: 1) it is important to make access to different versions of a source as seamless as possible, 2) achieving seamless, cross-platform access to heterogeneous sources is difficult, 3) significant differences exist between coding the subject content of an electronic information resource versus that of an article or a book, 4) customizing the ISM to multiple institutions entails significant complexities, and 5) there are many design trade-offs between specifying searches and viewing sets of retrieved sources that must be taken into consideration. An ISM KB and navigational tools have been constructed. In the process, much has been learned about the complexities of development and evaluation in this new environment, which are different from those for Gopher, wide area information servers (WAIS), World-Wide-Web (WWW), and MOSAIC resources.

Brief surgical procedure code lists for outcomes measurement and quality improvement in resource-limited settings.

PubMed

Liu, Charles; Kayima, Peter; Riesel, Johanna; Situma, Martin; Chang, David; Firth, Paul

2017-11-01

The lack of a classification system for surgical procedures in resource-limited settings hinders outcomes measurement and reporting. Existing procedure coding systems are prohibitively large and expensive to implement. We describe the creation and prospective validation of 3 brief procedure code lists applicable in low-resource settings, based on analysis of surgical procedures performed at Mbarara Regional Referral Hospital, Uganda's second largest public hospital. We reviewed operating room logbooks to identify all surgical operations performed at Mbarara Regional Referral Hospital during 2014. Based on the documented indication for surgery and procedure(s) performed, we assigned each operation up to 4 procedure codes from the International Classification of Diseases, 9th Revision, Clinical Modification. Coding of procedures was performed by 2 investigators, and a random 20% of procedures were coded by both investigators. These codes were aggregated to generate procedure code lists. During 2014, 6,464 surgical procedures were performed at Mbarara Regional Referral Hospital, to which we assigned 435 unique procedure codes. Substantial inter-rater reliability was achieved (κ = 0.7037). The 111 most common procedure codes accounted for 90% of all codes assigned, 180 accounted for 95%, and 278 accounted for 98%. We considered these sets of codes as 3 procedure code lists. In a prospective validation, we found that these lists described 83.2%, 89.2%, and 92.6% of surgical procedures performed at Mbarara Regional Referral Hospital during August to September of 2015, respectively. Empirically generated brief procedure code lists based on International Classification of Diseases, 9th Revision, Clinical Modification can be used to classify almost all surgical procedures performed at a Ugandan referral hospital. Such a standardized procedure coding system may enable better surgical data collection for administration, research, and quality improvement in resource-limited settings. Copyright © 2017 Elsevier Inc. All rights reserved.

Hardware independence checkout software

NASA Technical Reports Server (NTRS)

Cameron, Barry W.; Helbig, H. R.

1990-01-01

ACSI has developed a program utilizing CLIPS to assess compliance with various programming standards. Essentially the program parses C code to extract the names of all function calls. These are asserted as CLIPS facts which also include information about line numbers, source file names, and called functions. Rules have been devised to establish functions called that have not been defined in any of the source parsed. These are compared against lists of standards (represented as facts) using rules that check intersections and/or unions of these. By piping the output into other processes the source is appropriately commented by generating and executing parsed scripts.

Oil and gas field code master list 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This is the thirteenth annual edition of the Energy Information Administration`s (EIA) Oil and Gas Field Code Master List. It reflects data collected through October 1994 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. The master field name spellings and codes are to be used by respondents when filing the following Department of Energy (DOE) forms: Form EIA-23, {open_quotes}Annual Survey of Domestic Oil and Gas Reserves,{close_quotes} filed by oil and gas well operators (field codes are required from larger operators only); Forms FERC 8 and EIA-191, {open_quotes}Underground Gas Storagemore » Report,{close_quotes} filed by natural gas producers and distributors who operate underground natural gas storage facilities. Other Federal and State government agencies, as well as industry, use the EIA Oil and Gas Field Code Master List as the standard for field identification. A machine-readable version of the Oil and Gas Field Code Master List is available from the National Technical Information Service, 5285 Port Royal Road, Springfield, Virginia 22161, (703) 487-4650. In order for the Master List to be useful, it must be accurate and remain current. To accomplish this, EIA constantly reviews and revises this list. The EIA welcomes all comments, corrections, and additions to the Master List. All such information should be given to the EIA Field Code Coordinator at (214) 953-1858. EIA gratefully acknowledges the assistance provides by numerous State organizations and trade associations in verifying the existence of fields and their official nomenclature.« less

37 CFR 202.20 - Deposit of copies and phonorecords for copyright registration.

Code of Federal Regulations, 2013 CFR

2013-07-01

...; HTML; WAV; and MPEG family of formats, including MP3. This list of file formats is non-exhaustive and... distributed and used in such a manner that ownership and control of copies remain with the test sponsor or...” shall mean one of the following: (1) The first and last 25 pages or equivalent units of the source code...

Guide to Films (16 mm) About Negroes. First Edition.

ERIC Educational Resources Information Center

1970

Over 740 films (16 mm.) concerning the lives, culture, history, and problems of Black people in the United States and in Africa are listed alphabetically by title in this guide. Each entry includes the running time, a synopsis of the film's content, and a source code and tells whether the film is in black-and-white or in color. The guide includes…

Electrical generating unit inventory 1976-1986: Illinois, Indiana, Kentucky, Ohio, Pennsylvania and West Virginia

NASA Astrophysics Data System (ADS)

Jansen, S. D.

1981-09-01

The ORBES region consists of all of Kentucky, most of West Virginia, substantial parts of Illinois, Indiana, and Ohio, and southwestern Pennsylvania. The inventory lists installed electrical generating capacity in commercial service as of December 1, 1976, and scheduled capacity additions and removals between 1977 and 1986 in the six ORBES states (Illinois, Indiana, Kentucky, Ohio, Pennsylvania, and West Virginia). The following information is included for each electrical generating unit: unit ID code, company index, whether point or industrial ownership, plant name, whether inside or outside the ORBES region, FIPS county code, type of unit, size in megawatts, type of megawatt rating, status of unit, data of commercial operation, scheduled retirement date, primary fuel, alternate fuel, type of cooling, source of cooling water, and source of information.

A computer program to obtain time-correlated gust loads for nonlinear aircraft using the matched-filter-based method

NASA Technical Reports Server (NTRS)

Scott, Robert C.; Pototzky, Anthony S.; Perry, Boyd, III

1994-01-01

NASA Langley Research Center has, for several years, conducted research in the area of time-correlated gust loads for linear and nonlinear aircraft. The results of this work led NASA to recommend that the Matched-Filter-Based One-Dimensional Search Method be used for gust load analyses of nonlinear aircraft. This manual describes this method, describes a FORTRAN code which performs this method, and presents example calculations for a sample nonlinear aircraft model. The name of the code is MFD1DS (Matched-Filter-Based One-Dimensional Search). The program source code, the example aircraft equations of motion, a sample input file, and a sample program output are all listed in the appendices.

Development of a Simulink Library for the Design, Testing and Simulation of Software Defined GPS Radios. With Application to the Development of Parallel Correlator Structures

DTIC Science & Technology

2014-05-01

function Value = Select_Element(Index,Signal) %# eml Value = Signal(Index); Code Listing 1 Code for Selector Block 12 | P a g e 4.3...code for the Simulink function shiftedSignal = fcn(signal,Shift) %# eml shiftedSignal = circshift(signal,Shift); Code Listing 2 Code for CircShift

TEMPUS: Simulating personnel and tasks in a 3-D environment

NASA Technical Reports Server (NTRS)

Badler, N. I.; Korein, J. D.

1985-01-01

The latest TEMPUS installation occurred in March, 1985. Another update is slated for early June, 1985. An updated User's Manual is in preparation and will be delivered approximately mid-June, 1985. NASA JSC has full source code listings and internal documentation for installed software. NASA JSC staff has received instruction in the use of TEMPUS. Telephone consultations have augmented on-site instruction.

The Top 100. The Fastest Growing Careers for the 21st Century. Revised Edition.

ERIC Educational Resources Information Center

1998

This publication presents 100 careers the U.S. Department of Labor and other sources project as the fastest growing through the year 2006. A shaded bar on the bottom of the title page of each article contains a listing of codes for three commonly used government classification systems. Shaded bars at the bottom of other pages provide quick facts.…

CTF Theory Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Avramova, Maria N.; Salko, Robert K.

Coolant-Boiling in Rod Arrays|Two Fluids (COBRA-TF) is a thermal/ hydraulic (T/H) simulation code designed for light water reactor (LWR) vessel analysis. It uses a two-fluid, three-field (i.e. fluid film, fluid drops, and vapor) modeling approach. Both sub-channel and 3D Cartesian forms of 9 conservation equations are available for LWR modeling. The code was originally developed by Pacific Northwest Laboratory in 1980 and had been used and modified by several institutions over the last few decades. COBRA-TF also found use at the Pennsylvania State University (PSU) by the Reactor Dynamics and Fuel Management Group (RDFMG) and has been improved, updated, andmore » subsequently re-branded as CTF. As part of the improvement process, it was necessary to generate sufficient documentation for the open-source code which had lacked such material upon being adopted by RDFMG. This document serves mainly as a theory manual for CTF, detailing the many two-phase heat transfer, drag, and important accident scenario models contained in the code as well as the numerical solution process utilized. Coding of the models is also discussed, all with consideration for updates that have been made when transitioning from COBRA-TF to CTF. Further documentation outside of this manual is also available at RDFMG which focus on code input deck generation and source code global variable and module listings.« less

Documentation of the GLAS fourth order general circulation model. Volume 2: Scalar code

NASA Technical Reports Server (NTRS)

Kalnay, E.; Balgovind, R.; Chao, W.; Edelmann, D.; Pfaendtner, J.; Takacs, L.; Takano, K.

1983-01-01

Volume 2, of a 3 volume technical memoranda contains a detailed documentation of the GLAS fourth order general circulation model. Volume 2 contains the CYBER 205 scalar and vector codes of the model, list of variables, and cross references. A variable name dictionary for the scalar code, and code listings are outlined.

An algorithm to identify rheumatoid arthritis in primary care: a Clinical Practice Research Datalink study

PubMed Central

Muller, Sara; Hider, Samantha L; Raza, Karim; Stack, Rebecca J; Hayward, Richard A; Mallen, Christian D

2015-01-01

Objective Rheumatoid arthritis (RA) is a multisystem, inflammatory disorder associated with increased levels of morbidity and mortality. While much research into the condition is conducted in the secondary care setting, routinely collected primary care databases provide an important source of research data. This study aimed to update an algorithm to define RA that was previously developed and validated in the General Practice Research Database (GPRD). Methods The original algorithm consisted of two criteria. Individuals meeting at least one were considered to have RA. Criterion 1: ≥1 RA Read code and a disease modifying antirheumatic drug (DMARD) without an alternative indication. Criterion 2: ≥2 RA Read codes, with at least one ‘strong’ code and no alternative diagnoses. Lists of codes for consultations and prescriptions were obtained from the authors of the original algorithm where these were available, or compiled based on the original description and clinical knowledge. 4161 people with a first Read code for RA between 1 January 2010 and 31 December 2012 were selected from the Clinical Practice Research Datalink (CPRD, successor to the GPRD), and the criteria applied. Results Code lists were updated for the introduction of new Read codes and biological DMARDs. 3577/4161 (86%) of people met the updated algorithm for RA, compared to 61% in the original development study. 62.8% of people fulfilled both Criterion 1 and Criterion 2. Conclusions Those wishing to define RA in the CPRD, should consider using this updated algorithm, rather than a single RA code, if they wish to identify only those who are most likely to have RA. PMID:26700281

[An update of the diagnostic coding system by the Spanish Society of Pediatric Emergencies].

PubMed

Benito Fernández, J; Luaces Cubells, C; Gelabert Colomé, G; Anso Borda, I

2015-06-01

The Quality Working Group of the Spanish Society of Pediatric Emergencies (SEUP) presents an update of the diagnostic coding list. The original list was prepared and published in Anales de Pediatría in 2000, being based on the International Coding system ICD-9-CM current at that time. Following the same methodology used at that time and based on the 2014 edition of the ICD-9-CM, 35 new codes have been added to the list, 15 have been updated, and a list of the most frequent references to trauma diagnoses in pediatrics have been provided. In the current list of diagnoses, SEUP reflects the significant changes that have taken place in Pediatric Emergency Services in the last decade. Copyright © 2014 Asociación Española de Pediatría. Published by Elsevier España, S.L.U. All rights reserved.

Computer codes developed and under development at Lewis

NASA Technical Reports Server (NTRS)

Chamis, Christos C.

1992-01-01

The objective of this summary is to provide a brief description of: (1) codes developed or under development at LeRC; and (2) the development status of IPACS with some typical early results. The computer codes that have been developed and/or are under development at LeRC are listed in the accompanying charts. This list includes: (1) the code acronym; (2) select physics descriptors; (3) current enhancements; and (4) present (9/91) code status with respect to its availability and documentation. The computer codes list is grouped by related functions such as: (1) composite mechanics; (2) composite structures; (3) integrated and 3-D analysis; (4) structural tailoring; and (5) probabilistic structural analysis. These codes provide a broad computational simulation infrastructure (technology base-readiness) for assessing the structural integrity/durability/reliability of propulsion systems. These codes serve two other very important functions: they provide an effective means of technology transfer; and they constitute a depository of corporate memory.

24 CFR 200.926 - Minimum property standards for one and two family dwellings.

Code of Federal Regulations, 2012 CFR

2012-04-01

... property is to be located. (c) Standard for evaluating local or state building codes. The Secretary shall compare a local building code submitted under paragraph (d) of this section or a State code to the list of... each area and subarea on the list. (2) A State or local building code will be partially accepted if it...

24 CFR 200.926 - Minimum property standards for one and two family dwellings.

Code of Federal Regulations, 2014 CFR

2014-04-01

... property is to be located. (c) Standard for evaluating local or state building codes. The Secretary shall compare a local building code submitted under paragraph (d) of this section or a State code to the list of... each area and subarea on the list. (2) A State or local building code will be partially accepted if it...

24 CFR 200.926 - Minimum property standards for one and two family dwellings.

Code of Federal Regulations, 2013 CFR

2013-04-01

... property is to be located. (c) Standard for evaluating local or state building codes. The Secretary shall compare a local building code submitted under paragraph (d) of this section or a State code to the list of... each area and subarea on the list. (2) A State or local building code will be partially accepted if it...

TubercuList--10 years after.

PubMed

Lew, Jocelyne M; Kapopoulou, Adamandia; Jones, Louis M; Cole, Stewart T

2011-01-01

TubercuList (http://tuberculist.epfl.ch/), the relational database that presents genome-derived information about H37Rv, the paradigm strain of Mycobacterium tuberculosis, has been active for ten years and now presents its twentieth release. Here, we describe some of the recent changes that have resulted from manual annotation with information from the scientific literature. Through manual curation, TubercuList strives to provide current gene-based information and is thus distinguished from other online sources of genome sequence data for M. tuberculosis. New, mostly small, genes have been discovered and the coordinates of some existing coding sequences have been changed when bioinformatics or experimental data suggest that this is required. Nucleotides that are polymorphic between different sources of H37Rv are annotated and gene essentiality data have been updated. A host of functional information has been gleaned from the literature and many new activities of proteins and RNAs have been included. To facilitate basic and translational research, TubercuList also provides links to other specialized databases that present diverse datasets such as 3D-structures, expression profiles, drug development criteria and drug resistance information, in addition to direct access to PubMed articles pertinent to particular genes. TubercuList has been and remains a highly valuable tool for the tuberculosis research community with >75,000 visitors per month. Copyright © 2010 Elsevier Ltd. All rights reserved.

Additional and revised thermochemical data and computer code for WATEQ2: a computerized chemical model for trace and major element speciation and mineral equilibria of natural waters

USGS Publications Warehouse

Ball, James W.; Nordstrom, D. Kirk; Jenne, Everett A.

1980-01-01

A computerized chemical model, WATEQ2, has resulted from extensive additions to and revision of the WATEQ model of Truesdell and Jones (Truesdell, A. H., and Jones, B. F., 1974, WATEQ, a computer program for calculating chemical equilibria of natural waters: J. Res. U. S. Geol, Survey, v. 2, p. 233-274). The model building effort has necessitated searching the literature and selecting thermochemical data pertinent to the reactions added to the model. This supplementary report manes available the details of the reactions added to the model together with the selected thermochemical data and their sources. Also listed are details of program operation and a brief description of the output of the model. Appendices-contain a glossary of identifiers used in the PL/1 computer code, the complete PL/1 listing, and sample output from three water analyses used as test cases.

User's manual for Axisymmetric Diffuser Duct (ADD) code. Volume 1: General ADD code description

NASA Technical Reports Server (NTRS)

Anderson, O. L.; Hankins, G. B., Jr.; Edwards, D. E.

1982-01-01

This User's Manual contains a complete description of the computer codes known as the AXISYMMETRIC DIFFUSER DUCT code or ADD code. It includes a list of references which describe the formulation of the ADD code and comparisons of calculation with experimental flows. The input/output and general use of the code is described in the first volume. The second volume contains a detailed description of the code including the global structure of the code, list of FORTRAN variables, and descriptions of the subroutines. The third volume contains a detailed description of the CODUCT code which generates coordinate systems for arbitrary axisymmetric ducts.

Pneumatically Modulated Liquid Delivery System for Nebulizers

DTIC Science & Technology

2011-12-02

VII. Acknowledgements 18 APPENDIX A: Complete Parts List 19 APPENDIX B: Source code for the Arduino Uno microcontroller (CD) 23 1 I...implemented. The Arduino Uno is a well-established hobbyist microcontroller, focused on ease-of-use and teaching non-computer programmers about embedded...circuits. The Arduino Uno uses an Atmega328 microcontroller with thirteen digital TTL control lines, six 10-bit resolution 0-5 V analog inputs, TTL

The SIFT hardware/software systems. Volume 2: Software listings

NASA Technical Reports Server (NTRS)

Palumbo, Daniel L.

1985-01-01

This document contains software listings of the SIFT operating system and application software. The software is coded for the most part in a variant of the Pascal language, Pascal*. Pascal* is a cross-compiler running on the VAX and Eclipse computers. The output of Pascal* is BDX-390 assembler code. When necessary, modules are written directly in BDX-390 assembler code. The listings in this document supplement the description of the SIFT system found in Volume 1 of this report, A Detailed Description.

IMC/RMC Network Professional Film Collection.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Special Education Instructional Materials Center.

The compilation is a comprehensive listing of films available from the centers in the Instructional Materials Centers/Regional Media Centers (IMC/RMC) Network. Each IMC/RMC location is given a numerical code in a preliminary listing. These numerical codes are used within the film listing, which is arranged alphabetically according to film titles,…

INDEX TO 16MM EDUCATIONAL FILMS.

ERIC Educational Resources Information Center

University of Southern California, Los Angeles. National Information Center for Educational Media.

SIXTEEN MILLIMETER EDUCATIONAL FILMS ARE LISTED WITH TITLE, DESCRIPTION, TIME, COLOR/BLACK AND WHITE, PRODUCER CODE NAME, DISTRIBUTER CODE NAME, AND DATE OF PRODUCTION. FILMS ARE LISTED IN TWO WAYS--WITH TITLE ONLY BY SUBJECT IN A SUBJECT MATTER SECTION WHICH HAS AN OUTLINE AND INDEX, AND WITH ALL DATA IN A SECTION WHICH LISTS ALL FILMS…

40 CFR Appendix I to Part 264 - Recordkeeping Instructions

Code of Federal Regulations, 2010 CFR

2010-07-01

...., liquid, sludge, solid, or contained gas. If the waste is not listed in part 261, subpart D, of this... from production of ----, EPA Hazardous Waste Number W051). Each hazardous waste listed in part 261... Methods Enter the handling code(s) listed below that most closely represents the technique(s) used at the...

Oil and Gas field code master list 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This is the fourteenth annual edition of the Energy Information Administration`s (EIA) Oil and Gas Field Code Master List. It reflects data collected through October 1995 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the US. The Field Code Index, a listing of all field names and the States in which they occur, ordered by field code, has been removed from this year`s publications to reduce printing and postage costs. Complete copies (including the Field Code Index) will be available on the EIA CD-ROM and the EIA World-Wide Web Site. Future editionsmore » of the complete Master List will be available on CD-ROM and other electronic media. There are 57,400 field records in this year`s Oil and Gas Field Code Master List. As it is maintained by EIA, the Master List includes the following: field records for each State and county in which a field resides; field records for each offshore area block in the Gulf of Mexico in which a field resides; field records for each alias field name (see definition of alias below); and fields crossing State boundaries that may be assigned different names by the respective State naming authorities. Taking into consideration the double-counting of fields under such circumstances, EIA identifies 46,312 distinct fields in the US as of October 1995. This count includes fields that no longer produce oil or gas, and 383 fields used in whole or in part for oil or gas Storage. 11 figs., 6 tabs.« less

Regular Topologies for Gigabit Wide-Area Networks: Congestion Avoidance Testbed Experiments. Volume 3

NASA Technical Reports Server (NTRS)

Denny, Barbara A.; McKenney, Paul E., Sr.; Lee, Danny

1994-01-01

This document is Volume 3 of the final technical report on the work performed by SRI International (SRI) on SRI Project 8600. The document includes source listings for all software developed by SRI under this effort. Since some of our work involved the use of ST-II and the Sun Microsystems, Inc. (Sun) High-Speed Serial Interface (HSI/S) driver, we have included some of the source developed by LBL and BBN as well. In most cases, our decision to include source developed by other contractors depended on whether it was necessary to modify the original code. If we have modified the software in any way, it is included in this document. In the case of the Traffic Generator (TG), however, we have included all the ST-II software, even though BBN performed the integration, because the ST-II software is part of the standard TG release. It is important to note that all the code developed by other contractors is in the public domain, so that all software developed under this effort can be re-created from the source included here.

ANEMOS: A computer code to estimate air concentrations and ground deposition rates for atmospheric nuclides emitted from multiple operating sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, C.W.; Sjoreen, A.L.; Begovich, C.L.

This code estimates concentrations in air and ground deposition rates for Atmospheric Nuclides Emitted from Multiple Operating Sources. ANEMOS is one component of an integrated Computerized Radiological Risk Investigation System (CRRIS) developed for the US Environmental Protection Agency (EPA) for use in performing radiological assessments and in developing radiation standards. The concentrations and deposition rates calculated by ANEMOS are used in subsequent portions of the CRRIS for estimating doses and risks to man. The calculations made in ANEMOS are based on the use of a straight-line Gaussian plume atmospheric dispersion model with both dry and wet deposition parameter options. Themore » code will accommodate a ground-level or elevated point and area source or windblown source. Adjustments may be made during the calculations for surface roughness, building wake effects, terrain height, wind speed at the height of release, the variation in plume rise as a function of downwind distance, and the in-growth and decay of daughter products in the plume as it travels downwind. ANEMOS can also accommodate multiple particle sizes and clearance classes, and it may be used to calculate the dose from a finite plume of gamma-ray-emitting radionuclides passing overhead. The output of this code is presented for 16 sectors of a circular grid. ANEMOS can calculate both the sector-average concentrations and deposition rates at a given set of downwind distances in each sector and the average of these quantities over an area within each sector bounded by two successive downwind distances. ANEMOS is designed to be used primarily for continuous, long-term radionuclide releases. This report describes the models used in the code, their computer implementation, the uncertainty associated with their use, and the use of ANEMOS in conjunction with other codes in the CRRIS. A listing of the code is included in Appendix C.« less

Understanding Lustre Internals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Feiyi; Oral, H Sarp; Shipman, Galen M

2009-04-01

Lustre was initiated and funded, almost a decade ago, by the U.S. Department of Energy (DoE) Office of Science and National Nuclear Security Administration laboratories to address the need for an open source, highly-scalable, high-performance parallel filesystem on by then present and future supercomputing platforms. Throughout the last decade, it was deployed over numerous medium-to-large-scale supercomputing platforms and clusters, and it performed and met the expectations of the Lustre user community. As it stands at the time of writing this document, according to the Top500 list, 15 of the top 30 supercomputers in the world use Lustre filesystem. This reportmore » aims to present a streamlined overview on how Lustre works internally at reasonable details including relevant data structures, APIs, protocols and algorithms involved for Lustre version 1.6 source code base. More importantly, it tries to explain how various components interconnect with each other and function as a system. Portions of this report are based on discussions with Oak Ridge National Laboratory Lustre Center of Excellence team members and portions of it are based on our own understanding of how the code works. We, as the authors team bare all responsibilities for all errors and omissions in this document. We can only hope it helps current and future Lustre users and Lustre code developers as much as it helped us understanding the Lustre source code and its internal workings.« less

CO-FIRING COAL: FEEDLOT AND LITTER BIOMASS FUELS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Kalyan Annamalai; Dr. John Sweeten; Dr. Sayeed Mukhtar

2000-10-24

The following are proposed activities for quarter 1 (6/15/00-9/14/00): (1) Finalize the allocation of funds within TAMU to co-principal investigators and the final task lists; (2) Acquire 3 D computer code for coal combustion and modify for cofiring Coal:Feedlot biomass and Coal:Litter biomass fuels; (3) Develop a simple one dimensional model for fixed bed gasifier cofired with coal:biomass fuels; and (4) Prepare the boiler burner for reburn tests with feedlot biomass fuels. The following were achieved During Quarter 5 (6/15/00-9/14/00): (1) Funds are being allocated to co-principal investigators; task list from Prof. Mukhtar has been received (Appendix A); (2) Ordermore » has been placed to acquire Pulverized Coal gasification and Combustion 3 D (PCGC-3) computer code for coal combustion and modify for cofiring Coal: Feedlot biomass and Coal: Litter biomass fuels. Reason for selecting this code is the availability of source code for modification to include biomass fuels; (3) A simplified one-dimensional model has been developed; however convergence had not yet been achieved; and (4) The length of the boiler burner has been increased to increase the residence time. A premixed propane burner has been installed to simulate coal combustion gases. First coal, as a reburn fuel will be used to generate base line data followed by methane, feedlot and litter biomass fuels.« less

GrayStarServer: Server-side Spectrum Synthesis with a Browser-based Client-side User Interface

NASA Astrophysics Data System (ADS)

Short, C. Ian

2016-10-01

We present GrayStarServer (GSS), a stellar atmospheric modeling and spectrum synthesis code of pedagogical accuracy that is accessible in any web browser on commonplace computational devices and that runs on a timescale of a few seconds. The addition of spectrum synthesis annotated with line identifications extends the functionality and pedagogical applicability of GSS beyond that of its predecessor, GrayStar3 (GS3). The spectrum synthesis is based on a line list acquired from the NIST atomic spectra database, and the GSS post-processing and user interface client allows the user to inspect the plain text ASCII version of the line list, as well as to apply macroscopic broadening. Unlike GS3, GSS carries out the physical modeling on the server side in Java, and communicates with the JavaScript and HTML client via an asynchronous HTTP request. We also describe other improvements beyond GS3 such as a more physical treatment of background opacity and atmospheric physics, the comparison of key results with those of the Phoenix code, and the use of the HTML < {canvas}> element for higher quality plotting and rendering of results. We also present LineListServer, a Java code for converting custom ASCII line lists in NIST format to the byte data type file format required by GSS so that users can prepare their own custom line lists. We propose a standard for marking up and packaging model atmosphere and spectrum synthesis output for data transmission and storage that will facilitate a web-based approach to stellar atmospheric modeling and spectrum synthesis. We describe some pedagogical demonstrations and exercises enabled by easily accessible, on-demand, responsive spectrum synthesis. GSS may serve as a research support tool by providing quick spectroscopic reconnaissance. GSS may be found at www.ap.smu.ca/~ishort/OpenStars/GrayStarServer/grayStarServer.html, and source tarballs for local installations of both GSS and LineListServer may be found at www.ap.smu.ca/~ishort/OpenStars/.

Oil and Gas Field Code Master List 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This is the ninth annual edition of the Energy Information Administration's (EIA) Oil and Gas Field Code Master List. It reflects data collected through October 1990 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. There are 54,963 field records in this year's Oil and Gas Field Code Master List (FCML). This amounts to 467 more than in last year's report. As it is maintained by EIA, the Master List includes: Field records for each state and county in which a field resides; field records for each offshore area blockmore » in the Gulf of Mexico in which a field resides;field records for each alias field name; fields crossing state boundaries that may be assigned different names by the respective state naming authorities.« less

The Cybernetics of Cognition.

DTIC Science & Technology

1986-07-30

0075 8c. ADUXESS (City, St ate, and ZIP Code) 10. SOURCE OF FUNDING NUMBERS PROGRAM PROJECT TASK WORK UNIT San Diego, CA 92 152-6800 ELEMENT NO NO. NO...of orientation, preceding reports on the detais of the conference. This is followed by the Conference Program , whose specific aims are explained in a...and with one another through dialogue, discourse, and personal acquaintance, the Program proper lists not only the topics of the 9 sessions together

A computer simulation of the transient response of a 4 cylinder Stirling engine with burner and air preheater in a vehicle

NASA Technical Reports Server (NTRS)

Martini, W. R.

1981-01-01

A series of computer programs are presented with full documentation which simulate the transient behavior of a modern 4 cylinder Siemens arrangement Stirling engine with burner and air preheater. Cold start, cranking, idling, acceleration through 3 gear changes and steady speed operation are simulated. Sample results and complete operating instructions are given. A full source code listing of all programs are included.

Modelling Conditions and Health Care Processes in Electronic Health Records: An Application to Severe Mental Illness with the Clinical Practice Research Datalink.

PubMed

Olier, Ivan; Springate, David A; Ashcroft, Darren M; Doran, Tim; Reeves, David; Planner, Claire; Reilly, Siobhan; Kontopantelis, Evangelos

2016-01-01

The use of Electronic Health Records databases for medical research has become mainstream. In the UK, increasing use of Primary Care Databases is largely driven by almost complete computerisation and uniform standards within the National Health Service. Electronic Health Records research often begins with the development of a list of clinical codes with which to identify cases with a specific condition. We present a methodology and accompanying Stata and R commands (pcdsearch/Rpcdsearch) to help researchers in this task. We present severe mental illness as an example. We used the Clinical Practice Research Datalink, a UK Primary Care Database in which clinical information is largely organised using Read codes, a hierarchical clinical coding system. Pcdsearch is used to identify potentially relevant clinical codes and/or product codes from word-stubs and code-stubs suggested by clinicians. The returned code-lists are reviewed and codes relevant to the condition of interest are selected. The final code-list is then used to identify patients. We identified 270 Read codes linked to SMI and used them to identify cases in the database. We observed that our approach identified cases that would have been missed with a simpler approach using SMI registers defined within the UK Quality and Outcomes Framework. We described a framework for researchers of Electronic Health Records databases, for identifying patients with a particular condition or matching certain clinical criteria. The method is invariant to coding system or database and can be used with SNOMED CT, ICD or other medical classification code-lists.

Operations analysis (study 2.1). Program listing for the LOVES computer code

NASA Technical Reports Server (NTRS)

Wray, S. T., Jr.

1974-01-01

A listing of the LOVES computer program is presented. The program is coded partially in SIMSCRIPT and FORTRAN. This version of LOVES is compatible with both the CDC 7600 and the UNIVAC 1108 computers. The code has been compiled, loaded, and executed successfully on the EXEC 8 system for the UNIVAC 1108.

Oil and gas field code master list 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The Oil and Gas Field Code Master List 1997 is the sixteenth annual listing of all identified oil and gas fields in the US. It is updated with field information collected through October 1997. The purpose of this publication is to provide unique, standardized codes for identification of domestic fields. Use of these field codes fosters consistency of field identification by government and industry. As a result of their widespread adoption they have in effect become a national standard. The use of field names and codes listed in this publication is required on survey forms and other reports regarding field-specificmore » data collected by EIA. There are 58,366 field records in this year`s FCML, 437 more than last year. The FCML includes: field records for each State and county in which a field resides; field records for each offshore area block in the Gulf of Mexico in which a field resides; field records for each alias field name (definition of alias is listed); fields crossing State boundaries that may be assigned different names by the respective State naming authorities. This report also contains an Invalid Field Record List of 4 records that have been removed from the FCML since last year`s report. These records were found to be either technically incorrect or to represent field names which were never recognized by State naming authorities.« less

Reference Materials and Subject Matter Knowledge Codes for Airman Knowledge Testing

DOT National Transportation Integrated Search

2004-06-08

The listings of reference materials and subject matter knowledge codes have been : prepared by the Federal Aviation Administration (FAA) to establish specific : references for all knowledge standards. The listings contain reference materials : to be ...

Hanford meteorological station computer codes: Volume 9, The quality assurance computer codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burk, K.W.; Andrews, G.L.

1989-02-01

The Hanford Meteorological Station (HMS) was established in 1944 on the Hanford Site to collect and archive meteorological data and provide weather forecasts and related services for Hanford Site approximately 1/2 mile east of the 200 West Area and is operated by PNL for the US Department of Energy. Meteorological data are collected from various sensors and equipment located on and off the Hanford Site. These data are stored in data bases on the Digital Equipment Corporation (DEC) VAX 11/750 at the HMS (hereafter referred to as the HMS computer). Files from those data bases are routinely transferred to themore » Emergency Management System (EMS) computer at the Unified Dose Assessment Center (UDAC). To ensure the quality and integrity of the HMS data, a set of Quality Assurance (QA) computer codes has been written. The codes will be routinely used by the HMS system manager or the data base custodian. The QA codes provide detailed output files that will be used in correcting erroneous data. The following sections in this volume describe the implementation and operation of QA computer codes. The appendices contain detailed descriptions, flow charts, and source code listings of each computer code. 2 refs.« less

SKYSINE-II procedure: calculation of the effects of structure design on neutron, primary gamma-ray and secondary gamma-ray dose rates in air

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lampley, C.M.

1979-01-01

An updated version of the SKYSHINE Monte Carlo procedure has been developed. The new computer code, SKYSHINE-II, provides a substantial increase in versatility in that the program possesses the ability to address three types of point-isotropic radiation sources: (1) primary gamma rays, (2) neutrons, and (3) secondary gamma rays. In addition, the emitted radiation may now be characterized by an energy emission spectrum product of a new energy-dependent atmospheric transmission data base developed by Radiation Research Associates, Inc. for each of the three source types described above. Most of the computational options present in the original program have been retainedmore » in the new version. Hence, the SKYSHINE-II computer code provides a versatile and viable tool for the analysis of the radiation environment in the vicinity of a building structure containing radiation sources, situated within the confines of a nuclear power plant. This report describes many of the calculational methods employed within the SKYSHINE-II program. A brief description of the new data base is included. Utilization instructions for the program are provided for operation of the SKYSHINE-II code on the Brookhaven National Laboratory Central Scientific Computing Facility. A listing of the source decks, block data routines, and the new atmospheric transmission data base are provided in the appendices of the report.« less

Field estimates of gravity terrain corrections and Y2K-compatible method to convert from gravity readings with multiple base stations to tide- and long-term drift-corrected observations

USGS Publications Warehouse

Plouff, Donald

2000-01-01

Gravity observations are directly made or are obtained from other sources by the U.S. Geological Survey in order to prepare maps of the anomalous gravity field and consequently to interpret the subsurface distribution of rock densities and associated lithologic or geologic units. Observations are made in the field with gravity meters at new locations and at reoccupations of previously established gravity "stations." This report illustrates an interactively-prompted series of steps needed to convert gravity "readings" to values that are tied to established gravity datums and includes computer programs to implement those steps. Inasmuch as individual gravity readings have small variations, gravity-meter (instrument) drift may not be smoothly variable, and acommodations may be needed for ties to previously established stations, the reduction process is iterative. Decision-making by the program user is prompted by lists of best values and graphical displays. Notes about irregularities of topography, which affect the value of observed gravity but are not shown in sufficient detail on topographic maps, must be recorded in the field. This report illustrates ways to record field notes (distances, heights, and slope angles) and includes computer programs to convert field notes to gravity terrain corrections. This report includes approaches that may serve as models for other applications, for example: portrayal of system flow; style of quality control to document and validate computer applications; lack of dependence on proprietary software except source code compilation; method of file-searching with a dwindling list; interactive prompting; computer code to write directly in the PostScript (Adobe Systems Incorporated) printer language; and high-lighting the four-digit year on the first line of time-dependent data sets for assured Y2K compatibility. Computer source codes provided are written in the Fortran scientific language. In order for the programs to operate, they first must be converted (compiled) into an executable form on the user's computer. Although program testing was done in a UNIX (tradename of American Telephone and Telegraph Company) computer environment, it is anticipated that only a system-dependent date-and-time function may need to be changed for adaptation to other computer platforms that accept standard Fortran code.d del iliscipit volorer sequi ting etue feum zzriliquatum zzriustrud esenibh ex esto esequat.

Standards for reporting qualitative research: a synthesis of recommendations.

PubMed

O'Brien, Bridget C; Harris, Ilene B; Beckman, Thomas J; Reed, Darcy A; Cook, David A

2014-09-01

Standards for reporting exist for many types of quantitative research, but currently none exist for the broad spectrum of qualitative research. The purpose of the present study was to formulate and define standards for reporting qualitative research while preserving the requisite flexibility to accommodate various paradigms, approaches, and methods. The authors identified guidelines, reporting standards, and critical appraisal criteria for qualitative research by searching PubMed, Web of Science, and Google through July 2013; reviewing the reference lists of retrieved sources; and contacting experts. Specifically, two authors reviewed a sample of sources to generate an initial set of items that were potentially important in reporting qualitative research. Through an iterative process of reviewing sources, modifying the set of items, and coding all sources for items, the authors prepared a near-final list of items and descriptions and sent this list to five external reviewers for feedback. The final items and descriptions included in the reporting standards reflect this feedback. The Standards for Reporting Qualitative Research (SRQR) consists of 21 items. The authors define and explain key elements of each item and provide examples from recently published articles to illustrate ways in which the standards can be met. The SRQR aims to improve the transparency of all aspects of qualitative research by providing clear standards for reporting qualitative research. These standards will assist authors during manuscript preparation, editors and reviewers in evaluating a manuscript for potential publication, and readers when critically appraising, applying, and synthesizing study findings.

Market development directory for solar industrial process heat systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The purpose of this directory is to provide a basis for market development activities through a location listing of key trade associations, trade periodicals, and key firms for three target groups. Potential industrial users and potential IPH system designers were identified as the prime targets for market development activities. The bulk of the directory is a listing of these two groups. The third group, solar IPH equipment manufacturers, was included to provide an information source for potential industrial users and potential IPH system designers. Trade associates and their publications are listed for selected four-digit Standard Industrial Code (SIC) industries. Sincemore » industries requiring relatively lower temperature process heat probably will comprise most of the near-term market for solar IPH systems, the 80 SIC's included in this chapter have process temperature requirements less than 350/sup 0/F. Some key statistics and a location list of the largest plants (according to number of employees) in each state are included for 15 of the 80 SIC's. Architectural/engineering and consulting firms are listed which are known to have solar experience. Professional associated and periodicals to which information on solar IPH sytstems may be directed also are included. Solar equipment manufacturers and their associations are listed. The listing is based on the SERI Solar Energy Information Data Base (SEIDB).« less

Identification codes for organizations listed in computerized data systems of the U.S. Geological Survey

USGS Publications Warehouse

Blackwell, C.D.

1988-01-01

Codes for the unique identification of public and private organizations listed in computerized data systems are presented. These codes are used by the U.S. Geological Survey 's National Water Data Exchange (NAWDEX), National Water Data Storage and Retrieval System (WATSTORE), National Cartographic Information Center (NCIC), and Office of Water Data Coordination (OWDC). The format structure of the codes is discussed and instructions are given for requesting new books. (Author 's abstract)

A European classification of services for long-term care—the EU-project eDESDE-LTC

PubMed Central

Weber, Germain; Brehmer, Barbara; Zeilinger, Elisabeth; Salvador-Carulla, Luis

2009-01-01

Purpose and theory The eDESDE-LTC project aims at developing an operational system for coding, mapping and comparing services for long-term care (LTC) across EU. The projects strategy is to improve EU listing and access to relevant sources of healthcare information via development of SEMANTIC INTER-OPERABILITY in eHEALTH (coding and listing of services for LTC); to increase access to relevant sources of information on LTC services, and to improve linkages between national and regional websites; to foster cooperation with international organizations (OECD). Methods This operational system will include a standard classification of main types of care for persons with LTC needs and an instrument for mapping and standard description of services. These instruments are based on previous classification systems for mental health services (ESMS), disabilities services (DESDE) and ageing services (DESDAE). A Delphi panel made by seven partners developed a DESDE-LTC beta version, which was translated into six languages. The feasibility of DESDE-LTC is tested in six countries using national focal groups. Then the final version will be developed by the Delphi panel, a webpage, training material and course will be carried out. Results and conclusions The eDESDE-LTC system will be piloted in two EU countries (Spain and Bulgaria). Evaluation will focus primarily on usability and impact analysis. Discussion The added value of this project is related to the right of “having access to high-quality healthcare when and where it is needed” by EU citizens. Due to semantic variability and service complexity, existing national listings of services do not provide an adequate framework for patient mobility.

Modelling Conditions and Health Care Processes in Electronic Health Records: An Application to Severe Mental Illness with the Clinical Practice Research Datalink

PubMed Central

Olier, Ivan; Springate, David A.; Ashcroft, Darren M.; Doran, Tim; Reeves, David; Planner, Claire; Reilly, Siobhan; Kontopantelis, Evangelos

2016-01-01

Background The use of Electronic Health Records databases for medical research has become mainstream. In the UK, increasing use of Primary Care Databases is largely driven by almost complete computerisation and uniform standards within the National Health Service. Electronic Health Records research often begins with the development of a list of clinical codes with which to identify cases with a specific condition. We present a methodology and accompanying Stata and R commands (pcdsearch/Rpcdsearch) to help researchers in this task. We present severe mental illness as an example. Methods We used the Clinical Practice Research Datalink, a UK Primary Care Database in which clinical information is largely organised using Read codes, a hierarchical clinical coding system. Pcdsearch is used to identify potentially relevant clinical codes and/or product codes from word-stubs and code-stubs suggested by clinicians. The returned code-lists are reviewed and codes relevant to the condition of interest are selected. The final code-list is then used to identify patients. Results We identified 270 Read codes linked to SMI and used them to identify cases in the database. We observed that our approach identified cases that would have been missed with a simpler approach using SMI registers defined within the UK Quality and Outcomes Framework. Conclusion We described a framework for researchers of Electronic Health Records databases, for identifying patients with a particular condition or matching certain clinical criteria. The method is invariant to coding system or database and can be used with SNOMED CT, ICD or other medical classification code-lists. PMID:26918439

75 FR 9596 - Notice of Filing of a Pesticide Petition for Residues of a Aspergillus flavus AF36 on Corn Food...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-03

... manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be.... List of Subjects Environmental protection, Agricultural commodities, Feed additives, Food additives...

JEA's Code of Ethics for Advisers; and Sites for Additional Ethics Information.

ERIC Educational Resources Information Center

Bowen, John

1997-01-01

Lists general principles that media advisers should follow, the 12 points agreed upon as the Journalism Education Association's (JEA) Code of Ethics for Advisers, and a list of Web sites that deal with journalism ethics. (PA)

ATLAS Test Program Generator II (AGEN II). Volume I. Executive Software System.

DTIC Science & Technology

1980-08-01

features. l-1 C. To provide detailed descriptions of each of the system components and modules and their corresponding flowcharts. D. To describe methods of...contains the FORTRAN source code listings to enable programmer to do the expansions and modifications. The methods and details of adding another...characteristics of the network. The top-down implementa- tion method is therefore suggested. This method starts at the top by designing the IVT modules in

VizieR Online Data Catalog: Young clumps embedded in IRDC (Traficante+, 2015)

NASA Astrophysics Data System (ADS)

Traficante, A.; Fuller, G. A.; Peretto, N.; Pineda, J. E.; Molinari, S.

2015-06-01

Photometric parameters for 667 starless clumps (sources identified at 160um with a counterpart at 250 and 350um) and 1056 protostellar clumps (sources identified at 160um with a counterpart at 70, 250 and 350um). Photometric parameters obtained with Hyper photometry code (2015A&A...574A.119T). The photometry is corrected for aperture and colour corrections. The parameter list is the standard Hyper output (see description below). SED fit parameters for 650 starless clumps and 1034 protostellar clumps (all clumps with good SED fitting: Chi2<10, Temperature<40K. See the paper for details) (4 data files).

Tests of Exoplanet Atmospheric Radiative Transfer Codes

NASA Astrophysics Data System (ADS)

Harrington, Joseph; Challener, Ryan; DeLarme, Emerson; Cubillos, Patricio; Blecic, Jasmina; Foster, Austin; Garland, Justin

2016-10-01

Atmospheric radiative transfer codes are used both to predict planetary spectra and in retrieval algorithms to interpret data. Observational plans, theoretical models, and scientific results thus depend on the correctness of these calculations. Yet, the calculations are complex and the codes implementing them are often written without modern software-verification techniques. In the process of writing our own code, we became aware of several others with artifacts of unknown origin and even outright errors in their spectra. We present a series of tests to verify atmospheric radiative-transfer codes. These include: simple, single-line line lists that, when combined with delta-function abundance profiles, should produce a broadened line that can be verified easily; isothermal atmospheres that should produce analytically-verifiable blackbody spectra at the input temperatures; and model atmospheres with a range of complexities that can be compared to the output of other codes. We apply the tests to our own code, Bayesian Atmospheric Radiative Transfer (BART) and to several other codes. The test suite is open-source software. We propose this test suite as a standard for verifying current and future radiative transfer codes, analogous to the Held-Suarez test for general circulation models. This work was supported by NASA Planetary Atmospheres grant NX12AI69G and NASA Astrophysics Data Analysis Program grant NNX13AF38G.

The IRAS Minor Planet Survey

NASA Technical Reports Server (NTRS)

Tedesco, Edward F.; Veeder, Glenn J.; Fowler, John W.; Chillemi, Joseph R.

1992-01-01

This report documents the program and data used to identify known asteroids observed by the Infrared Astronomical Satellite (IRAS) and to compute albedos and diameters from their IRAS fluxes. It also presents listings of the results obtained. These results supplant those in the IRAS Asteroid and Comet Survey, 1986. The present version used new and improved asteroid orbital elements for 4679 numbered asteroids and 2632 additional asteroids for which at least two-opposition elements were available as of mid-1991. It employed asteroid absolute magnitudes on the International Astronomical Union system adopted in 1991. In addition, the code was modified to increase the reliability of associating asteroids with IRAS sources and rectify several shortcomings in the final data products released in 1986. Association reliability was improved by decreasing the position difference between an IRAS source and a predicted asteroid position required for an association. The shortcomings addressed included the problem of flux overestimation for low SNR sources and the systematic difference in albedos and diameters among the three wavelength bands (12, 25, and 60 micrometers). Several minor bugs in the original code were also corrected.

Master list and index to NASA directives

NASA Technical Reports Server (NTRS)

1984-01-01

All NASA management directives in force as of August 1, 1984 are listed by major subject headings showing number, effective date, title, responsible office, and distribution code. Delegations of authority in print by that date are listed numerically as well as by the installation or office to which special authority is assigned. Other consolidated lists show all management handbooks, directives applicable to the Jet Propulsion Laboratory, directives published in the Code of Federal Regulations, complementary manuals, and NASA safety standards. Distribution policies and instructions for ordering directives are included.

Master list and index to NASA directives

NASA Technical Reports Server (NTRS)

1982-01-01

All NASA management directives in force as of August 1, 1982 are listed by major subject headings showing number, effective data, title, responsible office, and distribution code. Delegations of authority in print by that date are listed numerically as well as by the installation or office to which special authority is assigned. Other consolidated lists show all management handbooks, directives applicable to the Jet Propulsion Laboratory, directions published in the Code of Federal Regulations, complementary manuals, and NASA safety standards. Distribution policies and instructions for ordering directives are included.

RAMONA-4B a computer code with three-dimensional neutron kinetics for BWR and SBWR system transient - user`s manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rohatgi, U.S.; Cheng, H.S.; Khan, H.J.

This document is the User`s Manual for the Boiling Water Reactor (BWR), and Simplified Boiling Water Reactor (SBWR) systems transient code RAMONA-4B. The code uses a three-dimensional neutron-kinetics model coupled with a multichannel, nonequilibrium, drift-flux, phase-flow model of the thermal hydraulics of the reactor vessel. The code is designed to analyze a wide spectrum of BWR core and system transients. Chapter 1 gives an overview of the code`s capabilities and limitations; Chapter 2 describes the code`s structure, lists major subroutines, and discusses the computer requirements. Chapter 3 is on code, auxillary codes, and instructions for running RAMONA-4B on Sun SPARCmore » and IBM Workstations. Chapter 4 contains component descriptions and detailed card-by-card input instructions. Chapter 5 provides samples of the tabulated output for the steady-state and transient calculations and discusses the plotting procedures for the steady-state and transient calculations. Three appendices contain important user and programmer information: lists of plot variables (Appendix A) listings of input deck for sample problem (Appendix B), and a description of the plotting program PAD (Appendix C). 24 refs., 18 figs., 11 tabs.« less

Reactive transport codes for subsurface environmental simulation

DOE PAGES

Steefel, C. I.; Appelo, C. A. J.; Arora, B.; ...

2014-09-26

A general description of the mathematical and numerical formulations used in modern numerical reactive transport codes relevant for subsurface environmental simulations is presented. The formulations are followed by short descriptions of commonly used and available subsurface simulators that consider continuum representations of flow, transport, and reactions in porous media. These formulations are applicable to most of the subsurface environmental benchmark problems included in this special issue. The list of codes described briefly here includes PHREEQC, HPx, PHT3D, OpenGeoSys (OGS), HYTEC, ORCHESTRA, TOUGHREACT, eSTOMP, HYDROGEOCHEM, CrunchFlow, MIN3P, and PFLOTRAN. The descriptions include a high-level list of capabilities for each of themore » codes, along with a selective list of applications that highlight their capabilities and historical development.« less

Text Exchange System

NASA Technical Reports Server (NTRS)

Snyder, W. V.; Hanson, R. J.

1986-01-01

Text Exchange System (TES) exchanges and maintains organized textual information including source code, documentation, data, and listings. System consists of two computer programs and definition of format for information storage. Comprehensive program used to create, read, and maintain TES files. TES developed to meet three goals: First, easy and efficient exchange of programs and other textual data between similar and dissimilar computer systems via magnetic tape. Second, provide transportable management system for textual information. Third, provide common user interface, over wide variety of computing systems, for all activities associated with text exchange.

Chaste: An Open Source C++ Library for Computational Physiology and Biology

PubMed Central

Mirams, Gary R.; Arthurs, Christopher J.; Bernabeu, Miguel O.; Bordas, Rafel; Cooper, Jonathan; Corrias, Alberto; Davit, Yohan; Dunn, Sara-Jane; Fletcher, Alexander G.; Harvey, Daniel G.; Marsh, Megan E.; Osborne, James M.; Pathmanathan, Pras; Pitt-Francis, Joe; Southern, James; Zemzemi, Nejib; Gavaghan, David J.

2013-01-01

Chaste — Cancer, Heart And Soft Tissue Environment — is an open source C++ library for the computational simulation of mathematical models developed for physiology and biology. Code development has been driven by two initial applications: cardiac electrophysiology and cancer development. A large number of cardiac electrophysiology studies have been enabled and performed, including high-performance computational investigations of defibrillation on realistic human cardiac geometries. New models for the initiation and growth of tumours have been developed. In particular, cell-based simulations have provided novel insight into the role of stem cells in the colorectal crypt. Chaste is constantly evolving and is now being applied to a far wider range of problems. The code provides modules for handling common scientific computing components, such as meshes and solvers for ordinary and partial differential equations (ODEs/PDEs). Re-use of these components avoids the need for researchers to ‘re-invent the wheel’ with each new project, accelerating the rate of progress in new applications. Chaste is developed using industrially-derived techniques, in particular test-driven development, to ensure code quality, re-use and reliability. In this article we provide examples that illustrate the types of problems Chaste can be used to solve, which can be run on a desktop computer. We highlight some scientific studies that have used or are using Chaste, and the insights they have provided. The source code, both for specific releases and the development version, is available to download under an open source Berkeley Software Distribution (BSD) licence at http://www.cs.ox.ac.uk/chaste, together with details of a mailing list and links to documentation and tutorials. PMID:23516352

Thrust Chamber Modeling Using Navier-Stokes Equations: Code Documentation and Listings. Volume 2

NASA Technical Reports Server (NTRS)

Daley, P. L.; Owens, S. F.

1988-01-01

A copy of the PHOENICS input files and FORTRAN code developed for the modeling of thrust chambers is given. These copies are contained in the Appendices. The listings are contained in Appendices A through E. Appendix A describes the input statements relevant to thrust chamber modeling as well as the FORTRAN code developed for the Satellite program. Appendix B describes the FORTRAN code developed for the Ground program. Appendices C through E contain copies of the Q1 (input) file, the Satellite program, and the Ground program respectively.

NASA directives master list and index

NASA Technical Reports Server (NTRS)

1995-01-01

This handbook sets forth in two parts, Master List of Management Directives and Index to NASA Management Directives, the following information for the guidance of users of the NASA Management Directives System. Chapter 1 contains introductory information material on how to use this handbook. Chapter 2 is a complete master list of agencywide management directives, describing each directive by type, number, effective date, expiration date, title, and organization code of the office responsible for the directive. Chapter 3 includes a consolidated numerical list of all delegations of authority and a breakdown of such delegation by the office or center to which special authority is assigned. Chapter 4 sets forth a consolidated list of all NASA handbooks (NHB's) and important footnotes covering the control and ordering of such documents. Chapter 5 is a consolidated list of NASA management directives applicable to the Jet Propulsion Laboratory. Chapter 6 is a consolidated list of NASA regulations published in the Code of Federal Regulations. Chapter 7 is a consolidated list of NASA regulations published in Title 14 of the Code of Federal Regulations. Complementary manuals to the NASA Management Directives System are described in Chapter 8. The second part contains an in depth alphabetical index to all NASA management directives other than handbooks, most of which are indexed by titles only.

Removing a barrier to computer-based outbreak and disease surveillance--the RODS Open Source Project.

PubMed

Espino, Jeremy U; Wagner, M; Szczepaniak, C; Tsui, F C; Su, H; Olszewski, R; Liu, Z; Chapman, W; Zeng, X; Ma, L; Lu, Z; Dara, J

2004-09-24

Computer-based outbreak and disease surveillance requires high-quality software that is well-supported and affordable. Developing software in an open-source framework, which entails free distribution and use of software and continuous, community-based software development, can produce software with such characteristics, and can do so rapidly. The objective of the Real-Time Outbreak and Disease Surveillance (RODS) Open Source Project is to accelerate the deployment of computer-based outbreak and disease surveillance systems by writing software and catalyzing the formation of a community of users, developers, consultants, and scientists who support its use. The University of Pittsburgh seeded the Open Source Project by releasing the RODS software under the GNU General Public License. An infrastructure was created, consisting of a website, mailing lists for developers and users, designated software developers, and shared code-development tools. These resources are intended to encourage growth of the Open Source Project community. Progress is measured by assessing website usage, number of software downloads, number of inquiries, number of system deployments, and number of new features or modules added to the code base. During September--November 2003, users generated 5,370 page views of the project website, 59 software downloads, 20 inquiries, one new deployment, and addition of four features. Thus far, health departments and companies have been more interested in using the software as is than in customizing or developing new features. The RODS laboratory anticipates that after initial installation has been completed, health departments and companies will begin to customize the software and contribute their enhancements to the public code base.

Big Software for SmallSats: Adapting CFS to CubeSat Missions

NASA Technical Reports Server (NTRS)

Cudmore, Alan P.; Crum, Gary; Sheikh, Salman; Marshall, James

2015-01-01

Expanding capabilities and mission objectives for SmallSats and CubeSats is driving the need for reliable, reusable, and robust flight software. While missions are becoming more complicated and the scientific goals more ambitious, the level of acceptable risk has decreased. Design challenges are further compounded by budget and schedule constraints that have not kept pace. NASA's Core Flight Software System (cFS) is an open source solution which enables teams to build flagship satellite level flight software within a CubeSat schedule and budget. NASA originally developed cFS to reduce mission and schedule risk for flagship satellite missions by increasing code reuse and reliability. The Lunar Reconnaissance Orbiter, which launched in 2009, was the first of a growing list of Class B rated missions to use cFS. Large parts of cFS are now open source, which has spurred adoption outside of NASA. This paper reports on the experiences of two teams using cFS for current CubeSat missions. The performance overheads of cFS are quantified, and the reusability of code between missions is discussed. The analysis shows that cFS is well suited to use on CubeSats and demonstrates the portability and modularity of cFS code.

OntoBrowser: a collaborative tool for curation of ontologies by subject matter experts.

PubMed

Ravagli, Carlo; Pognan, Francois; Marc, Philippe

2017-01-01

The lack of controlled terminology and ontology usage leads to incomplete search results and poor interoperability between databases. One of the major underlying challenges of data integration is curating data to adhere to controlled terminologies and/or ontologies. Finding subject matter experts with the time and skills required to perform data curation is often problematic. In addition, existing tools are not designed for continuous data integration and collaborative curation. This results in time-consuming curation workflows that often become unsustainable. The primary objective of OntoBrowser is to provide an easy-to-use online collaborative solution for subject matter experts to map reported terms to preferred ontology (or code list) terms and facilitate ontology evolution. Additional features include web service access to data, visualization of ontologies in hierarchical/graph format and a peer review/approval workflow with alerting. The source code is freely available under the Apache v2.0 license. Source code and installation instructions are available at http://opensource.nibr.com This software is designed to run on a Java EE application server and store data in a relational database. philippe.marc@novartis.com. © The Author 2016. Published by Oxford University Press.

OntoBrowser: a collaborative tool for curation of ontologies by subject matter experts

PubMed Central

Ravagli, Carlo; Pognan, Francois

2017-01-01

Summary: The lack of controlled terminology and ontology usage leads to incomplete search results and poor interoperability between databases. One of the major underlying challenges of data integration is curating data to adhere to controlled terminologies and/or ontologies. Finding subject matter experts with the time and skills required to perform data curation is often problematic. In addition, existing tools are not designed for continuous data integration and collaborative curation. This results in time-consuming curation workflows that often become unsustainable. The primary objective of OntoBrowser is to provide an easy-to-use online collaborative solution for subject matter experts to map reported terms to preferred ontology (or code list) terms and facilitate ontology evolution. Additional features include web service access to data, visualization of ontologies in hierarchical/graph format and a peer review/approval workflow with alerting. Availability and implementation: The source code is freely available under the Apache v2.0 license. Source code and installation instructions are available at http://opensource.nibr.com. This software is designed to run on a Java EE application server and store data in a relational database. Contact: philippe.marc@novartis.com PMID:27605099

Electrical generating unit inventory, 1976-1986: Illinois, Indiana, Kentucky, Ohio, Pennsylvania and West Virginia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jansen, S.D.

1981-09-01

The report was prepared as part of the Ohio River Basin Energy Study (ORBES), a multidisciplinary policy research program. The ORBES region consists of all of Kentucky, most of West Virginia, substantial parts of Illinois, Indiana, and Ohio, and southwestern Pennsylvania. The inventory lists installed electrical generating capacity in commercial service as of December 1, 1976, and scheduled capacity additions and removals between 1977 and 1986 in the six ORBES states (Illinois, Indiana, Kentucky, Ohio, Pennsylvania, and West Virginia). The following information is included for each electrical generating unit: unit ID code, company index, whether joint or industrial ownership, plantmore » name, whether inside or outside the ORBES region, FIPS county code, type of unit, size in megawatts, type of megawatt rating, status of unit, date of commercial operation (actual or scheduled), scheduled retirement date (if any), primary fuel, alternate fuel, type of cooling, source of cooling water, and source of information.« less

The NYU inverse swept wing code

NASA Technical Reports Server (NTRS)

Bauer, F.; Garabedian, P.; Mcfadden, G.

1983-01-01

An inverse swept wing code is described that is based on the widely used transonic flow program FLO22. The new code incorporates a free boundary algorithm permitting the pressure distribution to be prescribed over a portion of the wing surface. A special routine is included to calculate the wave drag, which can be minimized in its dependence on the pressure distribution. An alternate formulation of the boundary condition at infinity was introduced to enhance the speed and accuracy of the code. A FORTRAN listing of the code and a listing of a sample run are presented. There is also a user's manual as well as glossaries of input and output parameters.

The Next Generation of HLA Image Products

NASA Astrophysics Data System (ADS)

Gaffney, N. I.; Casertano, S.; Ferguson, B.

2012-09-01

We present the re-engineered pipeline based on existing and improved algorithms with the aim of improving processing quality, cross-instrument portability, data flow management, and software maintenance. The Hubble Legacy Archive (HLA) is a project to add value to the Hubble Space Telescope data archive by producing and delivering science-ready drizzled data products and source lists derived from these products. Initially, ACS, NICMOS, and WFCP2 data were combined using instrument-specific pipelines based on scripts developed to process the ACS GOODS data and a separate set of scripts to generate source extractor and DAOPhot source lists. The new pipeline, initially designed for WFC3 data, isolates instrument-specific processing and is easily extendable to other instruments and to generating wide-area mosaics. Significant improvements have been made in image combination using improved alignment, source detection, and background equalization routines. It integrates improved alignment procedures, better noise model, and source list generation within a single code base. Wherever practical, PyRAF based routines have been replaced with non-IRAF based python libraries (e.g. NumPy and PyFITS). The data formats have been modified to handle better and more consistent propagation of information from individual exposures to the combined products. A new exposure layer stores the effective exposure time for each pixel in the sky which is key in properly interpreting combined images from diverse data that were not initially planned to be mosaiced. We worked to improve the validity of the metadata within our FITS headers for these products relative to standard IRAF/PyRAF processing. Any keywords that pertain to individual exposures have been removed from the primary and extension headers and placed in a table extension for more direct and efficient perusal. This mechanism also allows for more detailed information on the processing of individual images to be stored and propagated providing a more hierarchical metadata storage system than key value pair FITS headers provide. In this poster we will discuss the changes to the pipeline processing and source list generation and the lessons learned which may be applicable to other archive projects as well as discuss our new metadata curation and preservation process.

Memory for pictures and words as a function of level of processing: Depth or dual coding?

PubMed

D'Agostino, P R; O'Neill, B J; Paivio, A

1977-03-01

The experiment was designed to test differential predictions derived from dual-coding and depth-of-processing hypotheses. Subjects under incidental memory instructions free recalled a list of 36 test events, each presented twice. Within the list, an equal number of events were assigned to structural, phonemic, and semantic processing conditions. Separate groups of subjects were tested with a list of pictures, concrete words, or abstract words. Results indicated that retention of concrete words increased as a direct function of the processing-task variable (structural < phonemic

Enterobacter aerogenes Hormaeche and Edwards 1960 (Approved Lists 1980) and Klebsiella mobilis Bascomb et al. 1971 (Approved Lists 1980) share the same nomenclatural type (ATCC 13048) on the Approved Lists and are homotypic synonyms, with consequences for the name Klebsiella mobilis Bascomb et al. 1971 (Approved Lists 1980).

PubMed

Tindall, B J; Sutton, G; Garrity, G M

2017-02-01

Enterobacter aerogenes Hormaeche and Edwards 1960 (Approved Lists 1980) and Klebsiella mobilis Bascomb et al. 1971 (Approved Lists 1980) were placed on the Approved Lists of Bacterial Names and were based on the same nomenclatural type, ATCC 13048. Consequently they are to be treated as homotypic synonyms. However, the names of homotypic synonyms at the rank of species normally are based on the same epithet. Examination of the Rules of the International Code of Nomenclature of Bacteria in force at the time indicates that the epithet mobilis in Klebsiella mobilis Bascomb et al. 1971 (Approved Lists 1980) was illegitimate at the time the Approved Lists were published and according to the Rules of the current International Code of Nomenclature of Prokaryotes continues to be illegitimate.

20 CFR 722.4 - The Secretary's list.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false The Secretary's list. 722.4 Section 722.4... ADEQUATE COVERAGE FOR PNEUMOCONIOSIS AND LISTING OF APPROVED STATE LAWS § 722.4 The Secretary's list. (a) The Secretary has determined that publication of the Secretary's list in the Code of Federal...

20 CFR 722.4 - The Secretary's list.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false The Secretary's list. 722.4 Section 722.4... PROVIDE ADEQUATE COVERAGE FOR PNEUMOCONIOSIS AND LISTING OF APPROVED STATE LAWS § 722.4 The Secretary's list. (a) The Secretary has determined that publication of the Secretary's list in the Code of Federal...

An efficient system for reliably transmitting image and video data over low bit rate noisy channels

NASA Technical Reports Server (NTRS)

Costello, Daniel J., Jr.; Huang, Y. F.; Stevenson, Robert L.

1994-01-01

This research project is intended to develop an efficient system for reliably transmitting image and video data over low bit rate noisy channels. The basic ideas behind the proposed approach are the following: employ statistical-based image modeling to facilitate pre- and post-processing and error detection, use spare redundancy that the source compression did not remove to add robustness, and implement coded modulation to improve bandwidth efficiency and noise rejection. Over the last six months, progress has been made on various aspects of the project. Through our studies of the integrated system, a list-based iterative Trellis decoder has been developed. The decoder accepts feedback from a post-processor which can detect channel errors in the reconstructed image. The error detection is based on the Huber Markov random field image model for the compressed image. The compression scheme used here is that of JPEG (Joint Photographic Experts Group). Experiments were performed and the results are quite encouraging. The principal ideas here are extendable to other compression techniques. In addition, research was also performed on unequal error protection channel coding, subband vector quantization as a means of source coding, and post processing for reducing coding artifacts. Our studies on unequal error protection (UEP) coding for image transmission focused on examining the properties of the UEP capabilities of convolutional codes. The investigation of subband vector quantization employed a wavelet transform with special emphasis on exploiting interband redundancy. The outcome of this investigation included the development of three algorithms for subband vector quantization. The reduction of transform coding artifacts was studied with the aid of a non-Gaussian Markov random field model. This results in improved image decompression. These studies are summarized and the technical papers included in the appendices.

Biopython: freely available Python tools for computational molecular biology and bioinformatics

PubMed Central

Cock, Peter J. A.; Antao, Tiago; Chang, Jeffrey T.; Chapman, Brad A.; Cox, Cymon J.; Dalke, Andrew; Friedberg, Iddo; Hamelryck, Thomas; Kauff, Frank; Wilczynski, Bartek; de Hoon, Michiel J. L.

2009-01-01

Summary: The Biopython project is a mature open source international collaboration of volunteer developers, providing Python libraries for a wide range of bioinformatics problems. Biopython includes modules for reading and writing different sequence file formats and multiple sequence alignments, dealing with 3D macro molecular structures, interacting with common tools such as BLAST, ClustalW and EMBOSS, accessing key online databases, as well as providing numerical methods for statistical learning. Availability: Biopython is freely available, with documentation and source code at www.biopython.org under the Biopython license. Contact: All queries should be directed to the Biopython mailing lists, see www.biopython.org/wiki/_Mailing_listspeter.cock@scri.ac.uk. PMID:19304878

Development of Milestone Schedules for Selected Logistics Support Directorate Programs. Appendix A. Part 2. Task Summaries.

DTIC Science & Technology

1987-09-15

MAC; CODE NUMBER: NONE AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL). RESPONSIBILITY: ROY & ILS DURATION: 32.00 WORK DAYS PRE PPPL SCHEDULE...ILS DURATION: 22.00 WORK DAYS R/V PPPL SCHEDULE: DVPMARPS REVIEW AND VALIDATE PRELIMINARY PROVISIONING PARTS LIST. CODE NUMBER: NONE RESPONSIBILITY

Observations and Thermochemical Calculations for Hot-Jupiter Atmospheres

NASA Astrophysics Data System (ADS)

Blecic, Jasmina; Harrington, Joseph; Bowman, M. Oliver; Cubillos, Patricio; Stemm, Madison

2015-01-01

I present Spitzer eclipse observations for WASP-14b and WASP-43b, an open source tool for thermochemical equilibrium calculations, and components of an open source tool for atmospheric parameter retrieval from spectroscopic data. WASP-14b is a planet that receives high irradiation from its host star, yet, although theory does not predict it, the planet hosts a thermal inversion. The WASP-43b eclipses have signal-to-noise ratios of ~25, one of the largest among exoplanets. To assess these planets' atmospheric composition and thermal structure, we developed an open-source Bayesian Atmospheric Radiative Transfer (BART) code. My dissertation tasks included developing a Thermochemical Equilibrium Abundances (TEA) code, implementing the eclipse geometry calculation in BART's radiative transfer module, and generating parameterized pressure and temperature profiles so the radiative-transfer module can be driven by the statistical module.To initialize the radiative-transfer calculation in BART, TEA calculates the equilibrium abundances of gaseous molecular species at a given temperature and pressure. It uses the Gibbs-free-energy minimization method with an iterative Lagrangian optimization scheme. Given elemental abundances, TEA calculates molecular abundances for a particular temperature and pressure or a list of temperature-pressure pairs. The code is tested against the original method developed by White at al. (1958), the analytic method developed by Burrows and Sharp (1999), and the Newton-Raphson method implemented in the open-source Chemical Equilibrium with Applications (CEA) code. TEA, written in Python, is modular, documented, and available to the community via the open-source development site GitHub.com.Support for this work was provided by NASA Headquarters under the NASA Earth and Space Science Fellowship Program, grant NNX12AL83H, by NASA through an award issued by JPL/Caltech, and through the Science Mission Directorate's Planetary Atmospheres Program, grant NNX12AI69G.

Documentation of the GLAS fourth order general calculation model. Volume 3: Vectorized code for the Cyber 205

NASA Technical Reports Server (NTRS)

Kalnay, E.; Balgovind, R.; Chao, W.; Edelmann, D.; Pfaendtner, J.; Takacs, L.; Takano, K.

1983-01-01

Volume 3 of a 3-volume technical memoranda which contains documentation of the GLAS fourth order genera circulation model is presented. The volume contains the CYBER 205 scalar and vector codes of the model, list of variables, and cross references. A dictionary of FORTRAN variables used in the Scalar Version, and listings of the FORTRAN Code compiled with the C-option, are included. Cross reference maps of local variables are included for each subroutine.

Real-Time Parallel Software Design Case Study: Implementation of the RASSP SAR Benchmark on the Intel Paragon.

DTIC Science & Technology

1996-01-01

Real-Time 19 5 Conclusion 23 List of References 25 ii LIST OF FIGURES FIGURE PAGE 3-1 Test Bench Pseudo Code 7 3-2 Fast Convolution...3-1 shows pseudo - code for a test bench with two application nodes. The outer test bench wrapper consists of three functions: pipeline_init, pipeline...exit_func); Figure 3-1. Test Bench Pseudo Code The application wrapper is contained in the pipeline routine and similarly consists of an

Turbofan noise generation. Volume 2: Computer programs

NASA Technical Reports Server (NTRS)

Ventres, C. S.; Theobald, M. A.; Mark, W. D.

1982-01-01

The use of a package of computer programs developed to calculate the in duct acoustic mods excited by a fan/stator stage operating at subsonic tip speed is described. The following three noise source mechanisms are included: (1) sound generated by the rotor blades interacting with turbulence ingested into, or generated within, the inlet duct; (2) sound generated by the stator vanes interacting with the turbulent wakes of the rotor blades; and (3) sound generated by the stator vanes interacting with the velocity deficits in the mean wakes of the rotor blades. The computations for three different noise mechanisms are coded as three separate computer program packages. The computer codes are described by means of block diagrams, tables of data and variables, and example program executions; FORTRAN listings are included.

Turbofan noise generation. Volume 2: Computer programs

NASA Astrophysics Data System (ADS)

Ventres, C. S.; Theobald, M. A.; Mark, W. D.

1982-07-01

The use of a package of computer programs developed to calculate the in duct acoustic mods excited by a fan/stator stage operating at subsonic tip speed is described. The following three noise source mechanisms are included: (1) sound generated by the rotor blades interacting with turbulence ingested into, or generated within, the inlet duct; (2) sound generated by the stator vanes interacting with the turbulent wakes of the rotor blades; and (3) sound generated by the stator vanes interacting with the velocity deficits in the mean wakes of the rotor blades. The computations for three different noise mechanisms are coded as three separate computer program packages. The computer codes are described by means of block diagrams, tables of data and variables, and example program executions; FORTRAN listings are included.

76 FR 17644 - Pesticide Product; Registration Application

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-30

... (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide.../Use: Mating disruption of the dogwood borer (Synanthedon scitula) (G. Casciano). List of Subjects...

Defining traumatic brain injury in children and youth using international classification of diseases version 10 codes: a systematic review protocol.

PubMed

Chan, Vincy; Thurairajah, Pravheen; Colantonio, Angela

2013-11-13

Although healthcare administrative data are commonly used for traumatic brain injury research, there is currently no consensus or consistency on using the International Classification of Diseases version 10 codes to define traumatic brain injury among children and youth. This protocol is for a systematic review of the literature to explore the range of International Classification of Diseases version 10 codes that are used to define traumatic brain injury in this population. The databases MEDLINE, MEDLINE In-Process, Embase, PsychINFO, CINAHL, SPORTDiscus, and Cochrane Database of Systematic Reviews will be systematically searched. Grey literature will be searched using Grey Matters and Google. Reference lists of included articles will also be searched. Articles will be screened using predefined inclusion and exclusion criteria and all full-text articles that meet the predefined inclusion criteria will be included for analysis. The study selection process and reasons for exclusion at the full-text level will be presented using a PRISMA study flow diagram. Information on the data source of included studies, year and location of study, age of study population, range of incidence, and study purpose will be abstracted into a separate table and synthesized for analysis. All International Classification of Diseases version 10 codes will be listed in tables and the codes that are used to define concussion, acquired traumatic brain injury, head injury, or head trauma will be identified. The identification of the optimal International Classification of Diseases version 10 codes to define this population in administrative data is crucial, as it has implications for policy, resource allocation, planning of healthcare services, and prevention strategies. It also allows for comparisons across countries and studies. This protocol is for a review that identifies the range and most common diagnoses used to conduct surveillance for traumatic brain injury in children and youth. This is an important first step in reaching an appropriate definition using International Classification of Diseases version 10 codes and can inform future work on reaching consensus on the codes to define traumatic brain injury for this vulnerable population.

PlotXY: A High Quality Plotting System for the Herschel Interactive Processing Environment (HIPE) and the Astronomical Community

NASA Astrophysics Data System (ADS)

Panuzzo, P.; Li, J.; Caux, E.

2012-09-01

The Herschel Interactive Processing Environment (HIPE) was developed by the European Space Agency (ESA) in collaboration with NASA and the Herschel Instrument Control Centres, to provide the astronomical community a complete environment to process and analyze the data gathered by the Herschel Space Observatory. One of the most important components of HIPE is the plotting system (named PlotXY) that we present here. With PlotXY it is possible to produce easily high quality publication-ready 2D plots. It provides a long list of features, with fully configurable components, and interactive zooming. The entire code of HIPE is written in Java and is open source released under the GNU Lesser General Public License version 3. A new version of PlotXY is being developed to be independent from the HIPE code base; it is available to the software development community for the inclusion in other projects at the URL http://code.google.com/p/jplot2d/.

The Numerical Electromagnetics Code (NEC) - A Brief History

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burke, G J; Miller, E K; Poggio, A J

The Numerical Electromagnetics Code, NEC as it is commonly known, continues to be one of the more widely used antenna modeling codes in existence. With several versions in use that reflect different levels of capability and availability, there are now 450 copies of NEC4 and 250 copies of NEC3 that have been distributed by Lawrence Livermore National Laboratory to a limited class of qualified recipients, and several hundred copies of NEC2 that had a recorded distribution by LLNL. These numbers do not account for numerous copies (perhaps 1000s) that were acquired through other means capitalizing on the open source code,more » the absence of distribution controls prior to NEC3 and the availability of versions on the Internet. In this paper we briefly review the history of the code that is concisely displayed in Figure 1. We will show how it capitalized on the research of prominent contributors in the early days of computational electromagnetics, how a combination of events led to the tri-service-supported code development program that ultimately led to NEC and how it evolved to the present day product. The authors apologize that space limitations do not allow us to provide a list of references or to acknowledge the numerous contributors to the code both of which can be found in the code documents.« less

The Design and Analysis of a Network Interface for the Multi-Lingual Database System.

DTIC Science & Technology

1985-12-01

IDENTIF:CATION NUMBER 0 ORGANIZATION (If applicable) 8c. ADDRESS (City, State. and ZIP Code) 10. SOURCE OF FUNDING NUMBERS PROGRAM PROJECT TASK WORK UNIT...APPFNlDIX - THE~ KMS PROGRAM SPECIFICATI~bS ........ 94 I4 XST O)F REFEFRENCFS*O*IOebqBS~*OBS 124 Il LIST OF FIrURPS F’igure 1: The multi-Linqual Database...bacKend Database System *CABO0S). In this section, we Provide an overviev of Doti tne MLLS an tne 4B0S to enhance the readers understandin- of the

CAESAR: Commissioned Assignments Executive Support for the US Army.

DTIC Science & Technology

1986-03-27

travel between jobs ? b. Detailed Narrative The documented source code of CAESAR can be found in Appendix B. An explanatory listing of variables used is...Compute Match Preference PREFFORM SSI index a, b a,b Match Match Leave ADSPEC SC2 and Travel a, b Time ab a , b ~~N4 4. ORB Mac Matyh ,. ac ASI ASI SReport...sufficient time between assignments for the officer to 44 take 30 days leave and travel . While this is not a manda- tory consideration, it is common to

Financial constraints in capacity planning: a national utility regulatory model (NUREG). Volume III of III: software description. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1981-10-29

This volume is the software description for the National Utility Regulatory Model (NUREG). This is the third of three volumes provided by ICF under contract number DEAC-01-79EI-10579. These three volumes are: a manual describing the NUREG methodology; a users guide; and a description of the software. This manual describes the software which has been developed for NUREG. This includes a listing of the source modules. All computer code has been written in FORTRAN.

Automatic Registration of Scanned Satellite Imagery with a Digital Map Data Base.

DTIC Science & Technology

1980-11-01

define the corresponding map window (mW)(procedure TRANSFORMWINDOW MAP A-- S4S Araofms Cpo iin et Serc Area deiatl compAr tal _______________ T...to a LIST-item). LIN: = ( ® code 2621431 ; ® pointer LA to the line list, © pointer PRI; pointer PR2), LIST: = ( Q pointer PL to a LIN-item; n pointer...items where PL -pointers are replaced by a code for the beginning (the number 262140 in our case) and end (the number 26241). Figure 3.2 illustra- tes a

Just-in-time coding of the problem list in a clinical environment.

PubMed Central

Warren, J. J.; Collins, J.; Sorrentino, C.; Campbell, J. R.

1998-01-01

Clinically useful problem lists are essential to the CPR. Providing a terminology that is standardized and understood by all clinicians is a major challenge. UNMC has developed a lexicon to support their problem list. Using a just-in-time coding strategy, the lexicon is maintained and extended prospectively in a dynamic clinical environment. The terms in the lexicon are mapped to ICD-9-CM, NANDA, and SNOMED International classification schemes. Currently, the lexicon contains 12,000 terms. This process of development and maintenance of the lexicon is described. PMID:9929226

Home energy management (HEM) database: A list with coded attributes of 308 devices commercially available in the US.

PubMed

Pritoni, Marco; Ford, Rebecca; Karlin, Beth; Sanguinetti, Angela

2018-02-01

Policymakers worldwide are currently discussing whether to include home energy management (HEM) products in their portfolio of technologies to reduce carbon emissions and improve grid reliability. However, very little data is available about these products. Here we present the results of an extensive review including 308 HEM products available on the US market in 2015-2016. We gathered these data from publicly available sources such as vendor websites, online marketplaces and other vendor documents. A coding guide was developed iteratively during the data collection and utilized to classify the devices. Each product was coded based on 96 distinct attributes, grouped into 11 categories: Identifying information, Product components, Hardware, Communication, Software, Information - feedback, Information - feedforward, Control, Utility interaction, Additional benefits and Usability. The codes describe product features and functionalities, user interaction and interoperability with other devices. A mix of binary attributes and more descriptive codes allow to sort and group data without losing important qualitative information. The information is stored in a large spreadsheet included with this article, along with an explanatory coding guide. This dataset is analyzed and described in a research article entitled "Categories and functionality of smart home technology for energy management" (Ford et al., 2017) [1].

ADAPSO Computer Services Industry Directory of Members, 1972-1973.

ERIC Educational Resources Information Center

Association of Data Processing Service Organizations, New York, NY.

The 1972-73 directory of the Association of Data Processing Service Organizations was designed to provide a list of those members subscribe to the Code of Ethical Standards and can be expected to provide reliable and efficient services to the users in the community. The Code is presented, and then full member firms are listed for states in the…

Review of Hybrid (Deterministic/Monte Carlo) Radiation Transport Methods, Codes, and Applications at Oak Ridge National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, John C; Peplow, Douglas E.; Mosher, Scott W

2011-01-01

This paper provides a review of the hybrid (Monte Carlo/deterministic) radiation transport methods and codes used at the Oak Ridge National Laboratory and examples of their application for increasing the efficiency of real-world, fixed-source Monte Carlo analyses. The two principal hybrid methods are (1) Consistent Adjoint Driven Importance Sampling (CADIS) for optimization of a localized detector (tally) region (e.g., flux, dose, or reaction rate at a particular location) and (2) Forward Weighted CADIS (FW-CADIS) for optimizing distributions (e.g., mesh tallies over all or part of the problem space) or multiple localized detector regions (e.g., simultaneous optimization of two or moremore » localized tally regions). The two methods have been implemented and automated in both the MAVRIC sequence of SCALE 6 and ADVANTG, a code that works with the MCNP code. As implemented, the methods utilize the results of approximate, fast-running 3-D discrete ordinates transport calculations (with the Denovo code) to generate consistent space- and energy-dependent source and transport (weight windows) biasing parameters. These methods and codes have been applied to many relevant and challenging problems, including calculations of PWR ex-core thermal detector response, dose rates throughout an entire PWR facility, site boundary dose from arrays of commercial spent fuel storage casks, radiation fields for criticality accident alarm system placement, and detector response for special nuclear material detection scenarios and nuclear well-logging tools. Substantial computational speed-ups, generally O(102-4), have been realized for all applications to date. This paper provides a brief review of the methods, their implementation, results of their application, and current development activities, as well as a considerable list of references for readers seeking more information about the methods and/or their applications.« less

A review of high-speed, convective, heat-transfer computation methods

NASA Technical Reports Server (NTRS)

Tauber, Michael E.

1989-01-01

The objective of this report is to provide useful engineering formulations and to instill a modest degree of physical understanding of the phenomena governing convective aerodynamic heating at high flight speeds. Some physical insight is not only essential to the application of the information presented here, but also to the effective use of computer codes which may be available to the reader. A discussion is given of cold-wall, laminar boundary layer heating. A brief presentation of the complex boundary layer transition phenomenon follows. Next, cold-wall turbulent boundary layer heating is discussed. This topic is followed by a brief coverage of separated flow-region and shock-interaction heating. A review of heat protection methods follows, including the influence of mass addition on laminar and turbulent boundary layers. Also discussed are a discussion of finite-difference computer codes and a comparison of some results from these codes. An extensive list of references is also provided from sources such as the various AIAA journals and NASA reports which are available in the open literature.

A review of high-speed, convective, heat-transfer computation methods

NASA Technical Reports Server (NTRS)

Tauber, Michael E.

1989-01-01

The objective is to provide useful engineering formulations and to instill a modest degree of physical understanding of the phenomena governing convective aerodynamic heating at high flight speeds. Some physical insight is not only essential to the application of the information presented here, but also to the effective use of computer codes which may be available to the reader. Given first is a discussion of cold-wall, laminar boundary layer heating. A brief presentation of the complex boundary layer transition phenomenon follows. Next, cold-wall turbulent boundary layer heating is discussed. This topic is followed by a brief coverage of separated flow-region and shock-interaction heating. A review of heat protection methods follows, including the influence of mass addition on laminar and turbulent boundary layers. Next is a discussion of finite-difference computer codes and a comparison of some results from these codes. An extensive list of references is also provided from sources such as the various AIAA journals and NASA reports which are available in the open literature.

GENPLOT: A formula-based Pascal program for data manipulation and plotting

NASA Astrophysics Data System (ADS)

Kramer, Matthew J.

Geochemical processes involving alteration, differentiation, fractionation, or migration of elements may be elucidated by a number of discrimination or variation diagrams (e.g., AFM, Harker, Pearce, and many others). The construction of these diagrams involves arithmetic combination of selective elements (involving major, minor, or trace elements). GENPLOT utilizes a formula-based algorithm (an expression parser) which enables the program to manipulate multiparameter databases and plot XY, ternary, tetrahedron, and REE type plots without needing to change either the source code or rearranging databases. Formulae may be any quadratic expression whose variables are the column headings of the data matrix. A full-screen editor with limited equations and arithmetic functions (spreadsheet) has been incorporated into the program to aid data entry and editing. Data are stored as ASCII files to facilitate interchange of data between other programs and computers. GENPLOT was developed in Turbo Pascal for the IBM and compatible computers but also is available in Apple Pascal for the Apple Ile and Ill. Because the source code is too extensive to list here (about 5200 lines of Pascal code), the expression parsing routine, which is central to GENPLOT's flexibility is incorporated into a smaller demonstration program named SOLVE. The following paper includes a discussion on how the expression parser works and a detailed description of GENPLOT's capabilities.

Skyline: an open source document editor for creating and analyzing targeted proteomics experiments.

PubMed

MacLean, Brendan; Tomazela, Daniela M; Shulman, Nicholas; Chambers, Matthew; Finney, Gregory L; Frewen, Barbara; Kern, Randall; Tabb, David L; Liebler, Daniel C; MacCoss, Michael J

2010-04-01

Skyline is a Windows client application for targeted proteomics method creation and quantitative data analysis. It is open source and freely available for academic and commercial use. The Skyline user interface simplifies the development of mass spectrometer methods and the analysis of data from targeted proteomics experiments performed using selected reaction monitoring (SRM). Skyline supports using and creating MS/MS spectral libraries from a wide variety of sources to choose SRM filters and verify results based on previously observed ion trap data. Skyline exports transition lists to and imports the native output files from Agilent, Applied Biosystems, Thermo Fisher Scientific and Waters triple quadrupole instruments, seamlessly connecting mass spectrometer output back to the experimental design document. The fast and compact Skyline file format is easily shared, even for experiments requiring many sample injections. A rich array of graphs displays results and provides powerful tools for inspecting data integrity as data are acquired, helping instrument operators to identify problems early. The Skyline dynamic report designer exports tabular data from the Skyline document model for in-depth analysis with common statistical tools. Single-click, self-updating web installation is available at http://proteome.gs.washington.edu/software/skyline. This web site also provides access to instructional videos, a support board, an issues list and a link to the source code project.

Pyteomics--a Python framework for exploratory data analysis and rapid software prototyping in proteomics.

PubMed

Goloborodko, Anton A; Levitsky, Lev I; Ivanov, Mark V; Gorshkov, Mikhail V

2013-02-01

Pyteomics is a cross-platform, open-source Python library providing a rich set of tools for MS-based proteomics. It provides modules for reading LC-MS/MS data, search engine output, protein sequence databases, theoretical prediction of retention times, electrochemical properties of polypeptides, mass and m/z calculations, and sequence parsing. Pyteomics is available under Apache license; release versions are available at the Python Package Index http://pypi.python.org/pyteomics, the source code repository at http://hg.theorchromo.ru/pyteomics, documentation at http://packages.python.org/pyteomics. Pyteomics.biolccc documentation is available at http://packages.python.org/pyteomics.biolccc/. Questions on installation and usage can be addressed to pyteomics mailing list: pyteomics@googlegroups.com.

77 FR 2537 - Fenoxaprop-p

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-18

... production (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be exhaustive, but rather...? You may be potentially affected by this action if you are an agricultural producer, food manufacturer...

Leveraging the NLM map from SNOMED CT to ICD-10-CM to facilitate adoption of ICD-10-CM.

PubMed

Cartagena, F Phil; Schaeffer, Molly; Rifai, Dorothy; Doroshenko, Victoria; Goldberg, Howard S

2015-05-01

Develop and test web services to retrieve and identify the most precise ICD-10-CM code(s) for a given clinical encounter. Facilitate creation of user interfaces that 1) provide an initial shortlist of candidate codes, ideally visible on a single screen; and 2) enable code refinement. To satisfy our high-level use cases, the analysis and design process involved reviewing available maps and crosswalks, designing the rule adjudication framework, determining necessary metadata, retrieving related codes, and iteratively improving the code refinement algorithm. The Partners ICD-10-CM Search and Mapping Services (PI-10 Services) are SOAP web services written using Microsoft's.NET 4.0 Framework, Windows Communications Framework, and SQL Server 2012. The services cover 96% of the Partners problem list subset of SNOMED CT codes that map to ICD-10-CM codes and can return up to 76% of the 69,823 billable ICD-10-CM codes prior to creation of custom mapping rules. We consider ways to increase 1) the coverage ratio of the Partners problem list subset of SNOMED CT codes and 2) the upper bound of returnable ICD-10-CM codes by creating custom mapping rules. Future work will investigate the utility of the transitive closure of SNOMED CT codes and other methods to assist in custom rule creation and, ultimately, to provide more complete coverage of ICD-10-CM codes. ICD-10-CM will be easier for clinicians to manage if applications display short lists of candidate codes from which clinicians can subsequently select a code for further refinement. The PI-10 Services support ICD-10 migration by implementing this paradigm and enabling users to consistently and accurately find the best ICD-10-CM code(s) without translation from ICD-9-CM. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Assessment of tissue allograft safety monitoring with administrative healthcare databases: a pilot project using Medicare data.

PubMed

Dhakal, Sanjaya; Burwen, Dale R; Polakowski, Laura L; Zinderman, Craig E; Wise, Robert P

2014-03-01

Assess whether Medicare data are useful for monitoring tissue allograft safety and utilization. We used health care claims (billing) data from 2007 for 35 million fee-for-service Medicare beneficiaries, a predominantly elderly population. Using search terms for transplant-related procedures, we generated lists of ICD-9-CM and CPT(®) codes and assessed the frequency of selected allograft procedures. Step 1 used inpatient data and ICD-9-CM procedure codes. Step 2 added non-institutional provider (e.g., physician) claims, outpatient institutional claims, and CPT codes. We assembled preliminary lists of diagnosis codes for infections after selected allograft procedures. Many ICD-9-CM codes were ambiguous as to whether the procedure involved an allograft. Among 1.3 million persons with a procedure ascertained using the list of ICD-9-CM codes, only 1,886 claims clearly involved an allograft. CPT codes enabled better ascertainment of some allograft procedures (over 17,000 persons had corneal transplants and over 2,700 had allograft skin transplants). For spinal fusion procedures, CPT codes improved specificity for allografts; of nearly 100,000 patients with ICD-9-CM codes for spinal fusions, more than 34,000 had CPT codes indicating allograft use. Monitoring infrequent events (infections) after infrequent exposures (tissue allografts) requires large study populations. A strength of the large Medicare databases is the substantial number of certain allograft procedures. Limitations include lack of clinical detail and donor information. Medicare data can potentially augment passive reporting systems and may be useful for monitoring tissue allograft safety and utilization where codes clearly identify allograft use and coding algorithms can effectively screen for infections.

1 CFR 6.4 - Monthly list of sections affected.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Monthly list of sections affected. 6.4 Section 6.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER INDEXES AND ANCILLARIES § 6.4 Monthly list of sections affected. A monthly list of sections of the Code of...

1 CFR 6.4 - Monthly list of sections affected.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 1 General Provisions 1 2011-01-01 2011-01-01 false Monthly list of sections affected. 6.4 Section 6.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER INDEXES AND ANCILLARIES § 6.4 Monthly list of sections affected. A monthly list of sections of the Code of...

1 CFR 6.4 - Monthly list of sections affected.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 1 General Provisions 1 2012-01-01 2012-01-01 false Monthly list of sections affected. 6.4 Section 6.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER INDEXES AND ANCILLARIES § 6.4 Monthly list of sections affected. A monthly list of sections of the Code of...

1 CFR 6.4 - Monthly list of sections affected.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 1 General Provisions 1 2014-01-01 2012-01-01 true Monthly list of sections affected. 6.4 Section 6.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER INDEXES AND ANCILLARIES § 6.4 Monthly list of sections affected. A monthly list of sections of the Code of...

1 CFR 6.4 - Monthly list of sections affected.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 1 General Provisions 1 2013-01-01 2012-01-01 true Monthly list of sections affected. 6.4 Section 6.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER THE FEDERAL REGISTER INDEXES AND ANCILLARIES § 6.4 Monthly list of sections affected. A monthly list of sections of the Code of...

41 CFR 101-42.1102-8 - United States Munitions List items which require demilitarization.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 41 Public Contracts and Property Management 2 2014-07-01 2012-07-01 true United States Munitions... States Munitions List items which require demilitarization. (a) General. The United States Munitions List... appropriate code assigned to each Munitions List Item (MLI) to describe what, if any, restrictions or actual...

41 CFR 101-42.1102-8 - United States Munitions List items which require demilitarization.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 41 Public Contracts and Property Management 2 2012-07-01 2012-07-01 false United States Munitions... States Munitions List items which require demilitarization. (a) General. The United States Munitions List... appropriate code assigned to each Munitions List Item (MLI) to describe what, if any, restrictions or actual...

41 CFR 101-42.1102-8 - United States Munitions List items which require demilitarization.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 41 Public Contracts and Property Management 2 2011-07-01 2007-07-01 true United States Munitions... States Munitions List items which require demilitarization. (a) General. The United States Munitions List... appropriate code assigned to each Munitions List Item (MLI) to describe what, if any, restrictions or actual...

41 CFR 101-42.1102-8 - United States Munitions List items which require demilitarization.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true United States Munitions... States Munitions List items which require demilitarization. (a) General. The United States Munitions List... appropriate code assigned to each Munitions List Item (MLI) to describe what, if any, restrictions or actual...

41 CFR 101-42.1102-8 - United States Munitions List items which require demilitarization.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 41 Public Contracts and Property Management 2 2013-07-01 2012-07-01 true United States Munitions... States Munitions List items which require demilitarization. (a) General. The United States Munitions List... appropriate code assigned to each Munitions List Item (MLI) to describe what, if any, restrictions or actual...

Problem Management Module: An Innovative System to Improve Problem List Workflow

PubMed Central

Hodge, Chad M.; Kuttler, Kathryn G.; Bowes, Watson A.; Narus, Scott P.

2014-01-01

Electronic problem lists are essential to modern health record systems, with a primary goal to serve as the repository of a patient’s current health issues. Additionally, coded problems can be used to drive downstream activities such as decision support, evidence-based medicine, billing, and cohort generation for research. Meaningful Use also requires use of a coded problem list. Over the course of three years, Intermountain Healthcare developed a problem management module (PMM) that provided innovative functionality to improve clinical workflow and boost problem list adoption, e.g. smart search, user customizable views, problem evolution, and problem timelines. In 23 months of clinical use, clinicians entered over 70,000 health issues, the percentage of free-text items dropped to 1.2%, completeness of problem list items increased by 14%, and more collaborative habits were initiated. PMID:25954372

Creating Tomorrow's Technologists: Contrasting Information Technology Curriculum in North American Library and Information Science Graduate Programs against Code4lib Job Listings

ERIC Educational Resources Information Center

Maceli, Monica

2015-01-01

This research study explores technology-related course offerings in ALA-accredited library and information science (LIS) graduate programs in North America. These data are juxtaposed against a text analysis of several thousand LIS-specific technology job listings from the Code4lib jobs website. Starting in 2003, as a popular library technology…

75 FR 65321 - Notice of Receipt of Several Pesticide Petitions Filed for Residues of Pesticide Chemicals in or...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-22

... production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532... . List of Subjects Environmental protection, Agricultural commodities, Feed additives, Food additives...

Fast and Flexible Successive-Cancellation List Decoders for Polar Codes

NASA Astrophysics Data System (ADS)

Hashemi, Seyyed Ali; Condo, Carlo; Gross, Warren J.

2017-11-01

Polar codes have gained significant amount of attention during the past few years and have been selected as a coding scheme for the next generation of mobile broadband standard. Among decoding schemes, successive-cancellation list (SCL) decoding provides a reasonable trade-off between the error-correction performance and hardware implementation complexity when used to decode polar codes, at the cost of limited throughput. The simplified SCL (SSCL) and its extension SSCL-SPC increase the speed of decoding by removing redundant calculations when encountering particular information and frozen bit patterns (rate one and single parity check codes), while keeping the error-correction performance unaltered. In this paper, we improve SSCL and SSCL-SPC by proving that the list size imposes a specific number of bit estimations required to decode rate one and single parity check codes. Thus, the number of estimations can be limited while guaranteeing exactly the same error-correction performance as if all bits of the code were estimated. We call the new decoding algorithms Fast-SSCL and Fast-SSCL-SPC. Moreover, we show that the number of bit estimations in a practical application can be tuned to achieve desirable speed, while keeping the error-correction performance almost unchanged. Hardware architectures implementing both algorithms are then described and implemented: it is shown that our design can achieve 1.86 Gb/s throughput, higher than the best state-of-the-art decoders.

76 FR 69690 - Receipt of Several Pesticide Petitions Filed for Residues of Pesticide Chemicals in or on Various...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... code 112). [emsp14]Food manufacturing (NAICS code 311). [emsp14]Pesticide manufacturing (NAICS code... . List of Subjects Environmental protection, Agricultural commodities, Feed additives, Food additives...

75 FR 11171 - Notice of Filing of Several Pesticide Petitions for Residues of Pesticide Chemicals in or on...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-10

... limited to: Crop production (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be... Environmental protection, Agricultural commodities, Feed additives, Food additives, Pesticides and pests...

75 FR 60452 - Notice of Filing of Several Pesticide Petitions for Residues of Pesticide Chemicals in or on...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-30

... limited to: Crop production (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be... commodities, Feed additives, Food additives, Pesticides and pests, Reporting and recordkeeping requirements...

75 FR 17715 - Notice of Receipt of a Pesticide Petition Filed for Temporary Tolerance Exemption for Residues of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-07

...: Crop production (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be exhaustive, but..., Agricultural commodities, Feed additives, Food additives, Pesticides and pests, Reporting and recordkeeping...

76 FR 33183 - Receipt of a Pesticide Petition Filed for Residues of Pesticide Chemicals in or on Various...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

...: Crop production (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be exhaustive, but... CFR Part 174 Environmental protection, Agricultural commodities, Feed additives, Food additives...

76 FR 36479 - Receipt of a Pesticide Petition Filed for Residues of Pesticide Chemicals in or on Various...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-22

... limited to: Crop production (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be... commodities, Feed additives, Food additives, Pesticides and pests, Reporting and recordkeeping requirements...

Launch Summary for 1979

NASA Technical Reports Server (NTRS)

Vostreys, R. W.

1980-01-01

Spacecraft launching for 1979 are identified and listed under the categories of (1) sounding rockets, and (2) artificial Earth satellites and space probes. The sounding rockets section includes a listing of the experiments, index of launch sites and tables of the meanings and codes used in the launch listing.

HAL/S-FC and HAL/S-360 compiler system program description

NASA Technical Reports Server (NTRS)

1976-01-01

The compiler is a large multi-phase design and can be broken into four phases: Phase 1 inputs the source language and does a syntactic and semantic analysis generating the source listing, a file of instructions in an internal format (HALMAT) and a collection of tables to be used in subsequent phases. Phase 1.5 massages the code produced by Phase 1, performing machine independent optimization. Phase 2 inputs the HALMAT produced by Phase 1 and outputs machine language object modules in a form suitable for the OS-360 or FCOS linkage editor. Phase 3 produces the SDF tables. The four phases described are written in XPL, a language specifically designed for compiler implementation. In addition to the compiler, there is a large library containing all the routines that can be explicitly called by the source language programmer plus a large collection of routines for implementing various facilities of the language.

astroplan: An Open Source Observation Planning Package in Python

NASA Astrophysics Data System (ADS)

Morris, Brett M.; Tollerud, Erik; Sipőcz, Brigitta; Deil, Christoph; Douglas, Stephanie T.; Berlanga Medina, Jazmin; Vyhmeister, Karl; Smith, Toby R.; Littlefair, Stuart; Price-Whelan, Adrian M.; Gee, Wilfred T.; Jeschke, Eric

2018-03-01

We present astroplan—an open source, open development, Astropy affiliated package for ground-based observation planning and scheduling in Python. astroplan is designed to provide efficient access to common observational quantities such as celestial rise, set, and meridian transit times and simple transformations from sky coordinates to altitude-azimuth coordinates without requiring a detailed understanding of astropy’s implementation of coordinate systems. astroplan provides convenience functions to generate common observational plots such as airmass and parallactic angle as a function of time, along with basic sky (finder) charts. Users can determine whether or not a target is observable given a variety of observing constraints, such as airmass limits, time ranges, Moon illumination/separation ranges, and more. A selection of observation schedulers are included that divide observing time among a list of targets, given observing constraints on those targets. Contributions to the source code from the community are welcome.

Far infrared supplement. Third edition: Catalog of infrared observations (lambda greater than or equal to 4.6 micrometers)

NASA Technical Reports Server (NTRS)

Gezari, Daniel Y.; Schmitz, Marion; Pitts, Patricia S.; Mead, Jaylee M.

1993-01-01

The Far Infrared Supplement contains a subset of the data in the full Catalog of Infrared Observations (all observations at wavelengths greater than 4.6 microns). The Catalog of Infrared Observations (CIO), NASA RP-1294, is a compilation of infrared astronomical observational data obtained from an extensive literature search of scientific journals and major astronomical catalogs and surveys. The literature search is complete for years 1965 through 1990 in this third edition. The catalog contains about 210,000 observations of roughly 20,000 individual sources, and supporting appendices. The expanded third edition contains coded IRAS 4-band data for all CIO sources detected by IRAS. The appendices include an atlas of infrared source positions (also included in this volume), two bibliographies of catalog listings, and an atlas of infrared spectral ranges. The complete CIO database is available to qualified users in printed, microfiche, and magnetic tape formats.

Catalog of Infrared Observations, Third Edition

NASA Technical Reports Server (NTRS)

Gezari, Daniel Y.; Schmitz, Marion; Pitts, Patricia S.; Mead, Jaylee M.

1993-01-01

The Far Infrared Supplement contains a subset of the data in the full Catalog of Infrared Observations (all observations at wavelengths greater than 4.6 microns). The Catalog of Infrared Observations (CIO), NASA RP-1294, is a compilation of infrared astronomical observational data obtained from an extensive literature search of scientific journals and major astronomical catalogs and surveys. The literature search is complete for years 1965 through 1990 in this Third Edition. The Catalog contains about 210,000 observations of roughly 20,000 individual sources and supporting appendices. The expanded Third Edition contains coded IRAS 4-band data for all CIO sources detected by IRAS. The appendices include an atlas of infrared source positions (also included in this volume), two bibliographies of Catalog listings, and an atlas of infrared spectral ranges. The complete CIO database is available to qualified users in printed, microfiche, and magnetic-tape formats.

National Space Science Data Center (NSSDC) Data Listing

NASA Technical Reports Server (NTRS)

1980-01-01

Satellite and nonsatellite data available from the National Space Science Data Center are listed. The Satellite Data listing includes the spacecraft name, launch date, and an alphabetical list of experiments. The Non-Satellite Data listing contains ground based data, models, computer routines, and composite spacecraft data. The data set name, data form code, quantity of data, and the time space covered are included in the data sets of both listings where appropriate. Geodetic tracking data sets are also included.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Favorite, Jeffrey A.

SENSMG is a tool for computing first-order sensitivities of neutron reaction rates, reaction-rate ratios, leakage, k eff, and α using the PARTISN multigroup discrete-ordinates code. SENSMG computes sensitivities to all of the transport cross sections and data (total, fission, nu, chi, and all scattering moments), two edit cross sections (absorption and capture), and the density for every isotope and energy group. It also computes sensitivities to the mass density for every material and derivatives with respect to all interface locations. The tool can be used for one-dimensional spherical (r) and two-dimensional cylindrical (r-z) geometries. The tool can be used formore » fixed-source and eigenvalue problems. The tool implements Generalized Perturbation Theory (GPT) as discussed by Williams and Stacey. Section II of this report describes the theory behind adjoint-based sensitivities, gives the equations that SENSMG solves, and defines the sensitivities that are output. Section III describes the user interface, including the input file and command line options. Section IV describes the output. Section V gives some notes about the coding that may be of interest. Section VI discusses verification, which is ongoing. Section VII lists needs and ideas for future work. Appendix A lists all of the input files whose results are presented in Sec. VI.« less

[Effects of the Internet on the dissemination of medical information: some thoughts on applied ethics].

PubMed

Lucas, Jacques

2009-10-01

Learned and professional societies as well as health authorities must attempt to provide free access to their databases for physicians, by a simple repertory of key words and, if necessary, by portals. Although information available for physicians may not be intended to be secret, it often requires some professional training to be interpreted appropriately. The principles of the Code of Medical Ethics, as transcribed in the Public Health Code, apply to all forms and media of information and communication. In public spaces, readers must be guaranteed that information written by physicians corresponds to the state of the art, that it is not advertising or self-promotion or commercial, that it was developed by a process ensuring quality, and that it distinguishes clearly between a popularized description of scientific data and what remains uncertain because research is on-going. The public should be informed about the source of the information they see, the editorial quality of the site, and any potential financial dependence or conflicts of interest. According to the medical association, prudence is recommended for physicians who moderate chat-rooms and discussion lists. List moderation, like any other type of medical activity, must not be improvised; it requires prudence, thought, and training.

Information Seeking Behavior and User Education in Academic Libraries: Research, Theory, and Practice. A Selected List of Information Sources.

ERIC Educational Resources Information Center

Fridie, Stephanie, Comp.

This document lists sources useful for academic reference and instruction librarians who are concerned with assisting and teaching novice or non-professional end-user searchers. The bibliography is organized in two lists: complete bibliographic citations and subject listing of references. The types of sources listed include journal articles,…

Air Cushion Equipment Transporter (ACET) Testing. Volume 2.

DTIC Science & Technology

1986-10-01

m: lllllhllllEEE 1.0. 1-2-5 w lw w w w w -- * e %. f~n4% AD-A188 369 AFWAL-TR-86-3088 VOLUME 11 AIR CUSHION EQ~UIPuMNT TRNSPO’jRTERi (ACET) TESTING T.D... E . COLCLOUGH, J Chief Vehicle E eupment Division .. If your address has changed, if you wish to be removed from our mailing list, or if the addressee...and ZIP CodeI 10. SOURCE OF FUNDING NOS. PROGRAM PROJECT TASK WORK UNIT ELEMENT NO. NO NO NO II TITLE (includ. Securito C f e ,,n 62201F 2402 01 34 12

Advanced imaging system

NASA Technical Reports Server (NTRS)

1992-01-01

This document describes the Advanced Imaging System CCD based camera. The AIS1 camera system was developed at Photometric Ltd. in Tucson, Arizona as part of a Phase 2 SBIR contract No. NAS5-30171 from the NASA/Goddard Space Flight Center in Greenbelt, Maryland. The camera project was undertaken as a part of the Space Telescope Imaging Spectrograph (STIS) project. This document is intended to serve as a complete manual for the use and maintenance of the camera system. All the different parts of the camera hardware and software are discussed and complete schematics and source code listings are provided.

Automotive Gas Turbine Power System-Performance Analysis Code

NASA Technical Reports Server (NTRS)

Juhasz, Albert J.

1997-01-01

An open cycle gas turbine numerical modelling code suitable for thermodynamic performance analysis (i.e. thermal efficiency, specific fuel consumption, cycle state points, working fluid flowrates etc.) of automotive and aircraft powerplant applications has been generated at the NASA Lewis Research Center's Power Technology Division. The use this code can be made available to automotive gas turbine preliminary design efforts, either in its present version, or, assuming that resources can be obtained to incorporate empirical models for component weight and packaging volume, in later version that includes the weight-volume estimator feature. The paper contains a brief discussion of the capabilities of the presently operational version of the code, including a listing of input and output parameters and actual sample output listings.

Biases in GNSS-Data Processing

NASA Astrophysics Data System (ADS)

Schaer, S. C.; Dach, R.; Lutz, S.; Meindl, M.; Beutler, G.

2010-12-01

Within the Global Positioning System (GPS) traditionally different types of pseudo-range measurements (P-code, C/A-code) are available on the first frequency that are tracked by the receivers with different technologies. For that reason, P1-C1 and P1-P2 Differential Code Biases (DCB) need to be considered in a GPS data processing with a mix of different receiver types. Since the Block IIR-M series of GPS satellites also provide C/A-code on the second frequency, P2-C2 DCB need to be added to the list of biases for maintenance. Potential quarter-cycle biases between different phase observables (specifically L2P and L2C) are another issue. When combining GNSS (currently GPS and GLONASS), careful consideration of inter-system biases (ISB) is indispensable, in particular when an adequate combination of individual GLONASS clock correction results from different sources (using, e.g., different software packages) is intended. Facing the GPS and GLONASS modernization programs and the upcoming GNSS, like the European Galileo and the Chinese Compass, an increasing number of types of biases is expected. The Center for Orbit Determination in Europe (CODE) is monitoring these GPS and GLONASS related biases for a long time based on RINEX files of the tracking network of the International GNSS Service (IGS) and in the frame of the data processing as one of the global analysis centers of the IGS. Within the presentation we give an overview on the stability of the biases based on the monitoring. Biases derived from different sources are compared. Finally, we give an outlook on the potential handling of such biases with the big variety of signals and systems expected in the future.

Validation of The Health Improvement Network (THIN) Database for Epidemiologic Studies of Chronic Kidney Disease

PubMed Central

Denburg, Michelle R.; Haynes, Kevin; Shults, Justine; Lewis, James D.; Leonard, Mary B.

2011-01-01

Purpose Chronic kidney disease (CKD) is a prevalent and important outcome and covariate in pharmacoepidemiology. The Health Improvement Network (THIN) in the U.K. represents a unique resource for population-based studies of CKD. We compiled a valid list of Read codes to identify subjects with moderate to advanced CKD. Methods A cross-sectional validation study was performed to identify codes that best define CKD stages 3–5. All subjects with at least one non-zero measure of serum creatinine after 1-Jan-2002 were included. Estimated glomerular filtration rate (eGFR) was calculated according to the Schwartz formula for subjects <18 years and the Modification of Diet in Renal Disease formula for subjects ≥18 years of age. CKD was defined as an eGFR <60 ml/min/1.73m2 on at least two occasions, more than 90 days apart. Results The laboratory definition identified 230,426 subjects with CKD, for a period prevalence in 2008 of 4.56% (95% CI: 4.54, 4.58). A list of 45 Read codes was compiled which yielded a positive predictive value of 88.9% (95% CI: 88.7, 89.1), sensitivity of 48.8%, negative predictive value of 86.5%, and specificity of 98.2%. Of the 11.1% of subjects with a code who did not meet the laboratory definition, 83.6% had at least one eGFR <60. The most commonly used code was for CKD stage 3. Conclusions The proposed list of codes can be used to accurately identify CKD when serum creatinine data are limited. The most sensitive approach for the detection of CKD is to use this list to supplement creatinine measures. PMID:22020900

Validation of The Health Improvement Network (THIN) database for epidemiologic studies of chronic kidney disease.

PubMed

Denburg, Michelle R; Haynes, Kevin; Shults, Justine; Lewis, James D; Leonard, Mary B

2011-11-01

Chronic kidney disease (CKD) is a prevalent and important outcome and covariate in pharmacoepidemiology. The Health Improvement Network (THIN) in the UK represents a unique resource for population-based studies of CKD. We compiled a valid list of Read codes to identify subjects with moderate to advanced CKD. A cross-sectional validation study was performed to identify codes that best define CKD Stages 3-5. All subjects with at least one non-zero measure of serum creatinine after 1 January 2002 were included. Estimated glomerular filtration rate (eGFR) was calculated according to the Schwartz formula for subjects aged < 18 years and the Modification of Diet in Renal Disease formula for subjects aged ≥ 18 years. CKD was defined as an eGFR <60 mL/minute/1.73 m² on at least two occasions, more than 90 days apart. The laboratory definition identified 230,426 subjects with CKD, for a period prevalence in 2008 of 4.56% (95%CI, 4.54-4.58). A list of 45 Read codes was compiled, which yielded a positive predictive value of 88.9% (95%CI, 88.7-89.1), sensitivity of 48.8%, negative predictive value of 86.5%, and specificity of 98.2%. Of the 11.1% of subjects with a code who did not meet the laboratory definition, 83.6% had at least one eGFR <60. The most commonly used code was for CKD Stage 3. The proposed list of codes can be used to accurately identify CKD when serum creatinine data are limited. The most sensitive approach for the detection of CKD is to use this list to supplement creatinine measures. Copyright © 2011 John Wiley & Sons, Ltd.

Syndrome-source-coding and its universal generalization. [error correcting codes for data compression

NASA Technical Reports Server (NTRS)

Ancheta, T. C., Jr.

1976-01-01

A method of using error-correcting codes to obtain data compression, called syndrome-source-coding, is described in which the source sequence is treated as an error pattern whose syndrome forms the compressed data. It is shown that syndrome-source-coding can achieve arbitrarily small distortion with the number of compressed digits per source digit arbitrarily close to the entropy of a binary memoryless source. A 'universal' generalization of syndrome-source-coding is formulated which provides robustly effective distortionless coding of source ensembles. Two examples are given, comparing the performance of noiseless universal syndrome-source-coding to (1) run-length coding and (2) Lynch-Davisson-Schalkwijk-Cover universal coding for an ensemble of binary memoryless sources.

Clinician Perceptions of Childhood Risk Factors for Future Antisocial Behavior

ERIC Educational Resources Information Center

Koegl, Christopher J.; Farrington, David P.; Augimeri, Leena K.

2009-01-01

We asked 176 mental health clinicians to list factors that place a child at risk for engaging in future antisocial behavior. Participants were randomly assigned to do this in relationship to boys and girls. Listed factors were then coded into broad item categories using the Early Assessment Risk Lists (EARL). Of the 1,695 factors listed, 1,476…

MASTRE trajectory code update to automate flight trajectory design, performance predictions, and vehicle sizing for support of shuttle and shuttle derived vehicles: Programmers manual

NASA Technical Reports Server (NTRS)

1993-01-01

The information required by a programmer using the Minimum Hamiltonian AScent Trajectory Evaluation (MASTRE) Program is provided. This document enables the programmer to either modify the program or convert the program to computers other than the VAX computer. Documentation for each subroutine or function based on providing the definitions of the variables and a source listing are included. Questions concerning the equations, techniques, or input requirements should be answered by either the Engineering or User's manuals. Three appendices are also included which provide a listing of the Root-Sum-Square (RSS) program, a listing of subroutine names and definitions used in the MASTRE User Friendly Interface Program, and listing of the subroutine names and definitions used in the Mass Properties Program. The RSS Program is used to aid in the performance of dispersion analyses. The RSS program reads a file generated by the MASTRE Program, calculates dispersion parameters, and generates output tables and output plot files. UFI Program provides a screen user interface to aid the user in providing input to the model. The Mass Properties Program defines the mass properties data for the MASTRE program through the use of user interface software.

(20-22) Proposals to add Gerard, FL gallo-Prov. 1761, Kramer, Elench. Veg. 156, and Miller, Gard. Dict. Abr. ed. 4 1754 to the list of suppressed works in Appendix VI

USDA-ARS?s Scientific Manuscript database

The International Code of Nomenclature for algae, fungi and plants in its current edition, the 2012 Melbourne Code, includes in Art. 34 provisions for the suppression of names in specified publications that are listed in its Appendix VI. Any publication can be proposed for suppression, and if such a...

40 CFR 260.22 - Petitions to amend part 261 to exclude a waste produced at a particular facility.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... (c) If the waste is listed with codes “I”, “C”, “R”, or “E”, in subpart D, (1) The petitioner must... waste by operation of subpart C of part 261. (e) If the waste is listed with the code “H” in subpart D... a waste produced at a particular facility. 260.22 Section 260.22 Protection of Environment...

40 CFR 260.22 - Petitions to amend part 261 to exclude a waste produced at a particular facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... (c) If the waste is listed with codes “I”, “C”, “R”, or “E”, in subpart D, (1) The petitioner must... waste by operation of subpart C of part 261. (e) If the waste is listed with the code “H” in subpart D... a waste produced at a particular facility. 260.22 Section 260.22 Protection of Environment...

40 CFR 260.22 - Petitions to amend part 261 to exclude a waste produced at a particular facility.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... (c) If the waste is listed with codes “I”, “C”, “R”, or “E”, in subpart D, (1) The petitioner must... waste by operation of subpart C of part 261. (e) If the waste is listed with the code “H” in subpart D... a waste produced at a particular facility. 260.22 Section 260.22 Protection of Environment...

40 CFR 260.22 - Petitions to amend part 261 to exclude a waste produced at a particular facility.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... (c) If the waste is listed with codes “I”, “C”, “R”, or “E”, in subpart D, (1) The petitioner must... waste by operation of subpart C of part 261. (e) If the waste is listed with the code “H” in subpart D... a waste produced at a particular facility. 260.22 Section 260.22 Protection of Environment...

1 CFR 8.5 - Ancillaries.

Code of Federal Regulations, 2014 CFR

2014-01-01

... other place as the Director of the Federal Register considers appropriate, numerical lists of all.... Following the text of each Code of Federal Regulations volume, a numerical list of sections which are...

1 CFR 8.5 - Ancillaries.

Code of Federal Regulations, 2013 CFR

2013-01-01

... other place as the Director of the Federal Register considers appropriate, numerical lists of all.... Following the text of each Code of Federal Regulations volume, a numerical list of sections which are...

75 FR 48667 - Notice of Receipt of Several Pesticide Petitions Filed for Residues of Pesticide Chemicals in or...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-11

... (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be exhaustive, but rather provides a guide for..., Agricultural commodities, Feed additives, Food additives, Pesticides and pests, Reporting and recordkeeping...

76 FR 3885 - Notice of Receipt of a Pesticide Petition Filed for Residues of Pesticide Chemicals in or on...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-21

... (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be exhaustive, but rather provides a guide for... commodities, Feed additives, Food additives, Pesticides and pests, Reporting and recordkeeping requirements...

75 FR 53690 - Notice of Receipt of Pesticide Petition Filed for Residues of Potassium Peroxymonosulfate in or...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-01

... (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be exhaustive, but rather provides a guide for... Environmental protection, Agricultural commodities, Feed additives, Food additives, Pesticides and pests...

77 FR 27164 - Butylate, Clethodim, Dichlorvos, Dicofol, Isopropyl Carbanilate, et al.; Proposed Tolerance Actions

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-09

...: Crop production (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be exhaustive, but... apply to me? You may be potentially affected by this action if you are an agricultural producer, food...

75 FR 1773 - Notice of Receipt of a Pesticide Petition Filed for Residues of Polymeric Polyhydroxy Acid in or...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-13

... (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be exhaustive, but rather provides a guide for... Environmental protection, Agricultural commodities, Feed additives, Food additives, Pesticides and pests...

Report number codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, R.N.

This publication lists all report number codes processed by the Office of Scientific and Technical Information. The report codes are substantially based on the American National Standards Institute, Standard Technical Report Number (STRN)-Format and Creation Z39.23-1983. The Standard Technical Report Number (STRN) provides one of the primary methods of identifying a specific technical report. The STRN consists of two parts: The report code and the sequential number. The report code identifies the issuing organization, a specific program, or a type of document. The sequential number, which is assigned in sequence by each report issuing entity, is not included in thismore » publication. Part I of this compilation is alphabetized by report codes followed by issuing installations. Part II lists the issuing organization followed by the assigned report code(s). In both Parts I and II, the names of issuing organizations appear for the most part in the form used at the time the reports were issued. However, for some of the more prolific installations which have had name changes, all entries have been merged under the current name.« less

Comprehensive list of names of plant pathogenic bacteria, 1980-2007.

USDA-ARS?s Scientific Manuscript database

This list contains the names of all plant pathogenic bacteria which have been effectively and validly published in terms of the International Code of Nomenclature of Bacteria and the Standards for Naming Pathovars and their revisions. Included are species names from the Approved Lists of Bacterial N...

PCVLF User’s Guide

DTIC Science & Technology

1991-03-01

29 3.3.2 Manual Frequency List Measurement ................... 29 3.3.3 Manual 200-kHz Spectrum Measurement ................ 30 1 on/ lity Codes...39 4.2.1 Frequency List Measurements ......................... 39 4.2.2 Calibration Measurements...Manual Frequency List Measurements .................. 43 4.3 D isk Files ............................................... 43 4.3.1 Program Disk

The Automated Instrumentation and Monitoring System (AIMS): Design and Architecture. 3.2

NASA Technical Reports Server (NTRS)

Yan, Jerry C.; Schmidt, Melisa; Schulbach, Cathy; Bailey, David (Technical Monitor)

1997-01-01

Whether a researcher is designing the 'next parallel programming paradigm', another 'scalable multiprocessor' or investigating resource allocation algorithms for multiprocessors, a facility that enables parallel program execution to be captured and displayed is invaluable. Careful analysis of such information can help computer and software architects to capture, and therefore, exploit behavioral variations among/within various parallel programs to take advantage of specific hardware characteristics. A software tool-set that facilitates performance evaluation of parallel applications on multiprocessors has been put together at NASA Ames Research Center under the sponsorship of NASA's High Performance Computing and Communications Program over the past five years. The Automated Instrumentation and Monitoring Systematic has three major software components: a source code instrumentor which automatically inserts active event recorders into program source code before compilation; a run-time performance monitoring library which collects performance data; and a visualization tool-set which reconstructs program execution based on the data collected. Besides being used as a prototype for developing new techniques for instrumenting, monitoring and presenting parallel program execution, AIMS is also being incorporated into the run-time environments of various hardware testbeds to evaluate their impact on user productivity. Currently, the execution of FORTRAN and C programs on the Intel Paragon and PALM workstations can be automatically instrumented and monitored. Performance data thus collected can be displayed graphically on various workstations. The process of performance tuning with AIMS will be illustrated using various NAB Parallel Benchmarks. This report includes a description of the internal architecture of AIMS and a listing of the source code.

Skyline: an open source document editor for creating and analyzing targeted proteomics experiments

PubMed Central

MacLean, Brendan; Tomazela, Daniela M.; Shulman, Nicholas; Chambers, Matthew; Finney, Gregory L.; Frewen, Barbara; Kern, Randall; Tabb, David L.; Liebler, Daniel C.; MacCoss, Michael J.

2010-01-01

Summary: Skyline is a Windows client application for targeted proteomics method creation and quantitative data analysis. It is open source and freely available for academic and commercial use. The Skyline user interface simplifies the development of mass spectrometer methods and the analysis of data from targeted proteomics experiments performed using selected reaction monitoring (SRM). Skyline supports using and creating MS/MS spectral libraries from a wide variety of sources to choose SRM filters and verify results based on previously observed ion trap data. Skyline exports transition lists to and imports the native output files from Agilent, Applied Biosystems, Thermo Fisher Scientific and Waters triple quadrupole instruments, seamlessly connecting mass spectrometer output back to the experimental design document. The fast and compact Skyline file format is easily shared, even for experiments requiring many sample injections. A rich array of graphs displays results and provides powerful tools for inspecting data integrity as data are acquired, helping instrument operators to identify problems early. The Skyline dynamic report designer exports tabular data from the Skyline document model for in-depth analysis with common statistical tools. Availability: Single-click, self-updating web installation is available at http://proteome.gs.washington.edu/software/skyline. This web site also provides access to instructional videos, a support board, an issues list and a link to the source code project. Contact: brendanx@u.washington.edu Supplementary information: Supplementary data are available at Bioinformatics online. PMID:20147306

78 FR 8407 - Endosulfan; Pesticide Tolerance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-06

..., food manufacturers, or pesticide manufacturers. The following list of North American Industrial... (NAICS code 111). Animal Production (NAICS code 112). Food Manufacturing (NAICS code 311). Pesticide... statutory standards of the Federal Food, Drug and Cosmetic Act (FFDCA) section 408. EPA may in the future...

Location identifiers

DOT National Transportation Integrated Search

1997-01-30

This order lists the location identifiers authorized by the Federal Aviation Administration, Department of the Navy, and Transport Canada. It lists United States airspace fixes and procedure codes. The order also includes guidelines for requesting id...

Optimising Use of Electronic Health Records to Describe the Presentation of Rheumatoid Arthritis in Primary Care: A Strategy for Developing Code Lists

PubMed Central

Nicholson, Amanda; Ford, Elizabeth; Davies, Kevin A.; Smith, Helen E.; Rait, Greta; Tate, A. Rosemary; Petersen, Irene; Cassell, Jackie

2013-01-01

Background Research using electronic health records (EHRs) relies heavily on coded clinical data. Due to variation in coding practices, it can be difficult to aggregate the codes for a condition in order to define cases. This paper describes a methodology to develop ‘indicator markers’ found in patients with early rheumatoid arthritis (RA); these are a broader range of codes which may allow a probabilistic case definition to use in cases where no diagnostic code is yet recorded. Methods We examined EHRs of 5,843 patients in the General Practice Research Database, aged ≥30y, with a first coded diagnosis of RA between 2005 and 2008. Lists of indicator markers for RA were developed initially by panels of clinicians drawing up code-lists and then modified based on scrutiny of available data. The prevalence of indicator markers, and their temporal relationship to RA codes, was examined in patients from 3y before to 14d after recorded RA diagnosis. Findings Indicator markers were common throughout EHRs of RA patients, with 83.5% having 2 or more markers. 34% of patients received a disease-specific prescription before RA was coded; 42% had a referral to rheumatology, and 63% had a test for rheumatoid factor. 65% had at least one joint symptom or sign recorded and in 44% this was at least 6-months before recorded RA diagnosis. Conclusion Indicator markers of RA may be valuable for case definition in cases which do not yet have a diagnostic code. The clinical diagnosis of RA is likely to occur some months before it is coded, shown by markers frequently occurring ≥6 months before recorded diagnosis. It is difficult to differentiate delay in diagnosis from delay in recording. Information concealed in free text may be required for the accurate identification of patients and to assess the quality of care in general practice. PMID:23451024

Quality of coding diagnoses in emergency departments: effects on mapping the public's health.

PubMed

Aharonson-Daniel, Limor; Schwartz, Dagan; Hornik-Lurie, Tzipi; Halpern, Pinchas

2014-01-01

Emergency department (ED) attendees reflect the health of the population served by that hospital and the availability of health care services in the community. To examine the quality and accuracy of diagnoses recorded in the ED to appraise its potential utility as a guage of the population's medical needs. Using the Delphi process, a preliminary list of health indicators generated by an expert focus group was converted to a query to the Ministry of Health's database. In parallel, medical charts were reviewed in four hospitals to compare the handwritten diagnosis in the medical record with that recorded on the standard diagnosis "pick list" coding sheet. Quantity and quality of coding were assessed using explicit criteria. During 2010 a total of 17,761 charts were reviewed; diagnoses were not coded in 42%. The accuracy of existing coding was excellent (mismatch 1%-5%). Database query (2,670,300 visits to 28 hospitals in 2009) demonstrated potential benefits of these data as indicators of regional health needs. The findings suggest that an increase in the provision of community care may reduce ED attendance. Information on ED visits can be used to support health care planning. A "pick list" form with common diagnoses can facilitate quality recording of diagnoses in a busy ED, profiling the population's health needs in order to optimize care. Better compliance with the directive to code diagnosis is desired.

Recent Updates to the MELCOR 1.8.2 Code for ITER Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merrill, Brad J

This report documents recent changes made to the MELCOR 1.8.2 computer code for application to the International Thermonuclear Experimental Reactor (ITER), as required by ITER Task Agreement ITA 81-18. There are four areas of change documented by this report. The first area is the addition to this code of a model for transporting HTO. The second area is the updating of the material oxidation correlations to match those specified in the ITER Safety Analysis Data List (SADL). The third area replaces a modification to an aerosol tranpsort subroutine that specified the nominal aerosol density internally with one that now allowsmore » the user to specify this density through user input. The fourth area corrected an error that existed in an air condensation subroutine of previous versions of this modified MELCOR code. The appendices of this report contain FORTRAN listings of the coding for these modifications.« less

Remembering Plurals: Unit of Coding and Form of Coding during Serial Recall.

ERIC Educational Resources Information Center

Van Der Molen, Hugo; Morton, John

1979-01-01

Adult females recalled lists of six words, including some plural nouns, presented visually in sequence. A frequent error was to detach the plural from its root. This supports a morpheme-based as opposed to a unitary word code. Evidence for a primarily phonological coding of the plural morpheme was obtained. (Author/RD)

Pacific Northwest ecoclass codes for seral and potential natural communities.

Treesearch

Frederick C. Hall

1998-01-01

Lists codes for identification of potential natural communities (plant association, habitat types), their seral status, and vegetation structure in and around the Pacific Northwest. Codes are a six-digit alphanumeric system using the first letter of tree species, life-form, seral status, and structure so that most codes can be directly interpreted. Seven appendices...

40 CFR 59.511 - What notifications and reports must I submit?

Code of Federal Regulations, 2011 CFR

2011-07-01

..., and the applicable reactivity factor; or (ii) For hydrocarbon solvent mixtures listed in either 2B or... reactivity factor. (10) For each product formulation, a list of the unique product codes by Universal Product... compounds listed in Table 2A of this subpart, the chemical name, CAS number, and the applicable reactivity...

40 CFR 59.511 - What notifications and reports must I submit?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., and the applicable reactivity factor; or (ii) For hydrocarbon solvent mixtures listed in either 2B or... reactivity factor. (10) For each product formulation, a list of the unique product codes by Universal Product... compounds listed in Table 2A of this subpart, the chemical name, CAS number, and the applicable reactivity...

40 CFR 59.511 - What notifications and reports must I submit?

Code of Federal Regulations, 2014 CFR

2014-07-01

..., and the applicable reactivity factor; or (ii) For hydrocarbon solvent mixtures listed in either 2B or... reactivity factor. (10) For each product formulation, a list of the unique product codes by Universal Product... compounds listed in Table 2A of this subpart, the chemical name, CAS number, and the applicable reactivity...

40 CFR 59.511 - What notifications and reports must I submit?

Code of Federal Regulations, 2012 CFR

2012-07-01

..., and the applicable reactivity factor; or (ii) For hydrocarbon solvent mixtures listed in either 2B or... reactivity factor. (10) For each product formulation, a list of the unique product codes by Universal Product... compounds listed in Table 2A of this subpart, the chemical name, CAS number, and the applicable reactivity...

76 FR 66181 - The Commerce Control List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-26

... DEPARTMENT OF COMMERCE Bureau of Industry and Security 15 CFR Part 774 The Commerce Control List CFR Correction In Title 15 of the Code of Federal Regulations, Parts 300-799, revised as of January 1... to read as follows: Supplement No. 1 to PART 774--THE COMMERCE CONTROL LIST * * * * * 1C118 Titanium...

76 FR 66181 - The Commerce Control List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-26

... DEPARTMENT OF COMMERCE Bureau of Industry and Security 15 CFR Part 774 The Commerce Control List CFR Correction In Title 15 of the Code of Federal Regulations, Parts 300-799, revised as of January 1... read as follows: Supplement No. 1 to PART 774--THE COMMERCE CONTROL LIST * * * * * 2B008 Assemblies or...

Listing of solar radiation measuring equipment and glossary

NASA Technical Reports Server (NTRS)

Carter, E. A.; Greenbaum, S. A.; Patel, A. M.

1976-01-01

An attempt is made to list and provide all available information about solar radiation measuring equipment which are being manufactured and are available on the market. The list is in tabular form and includes sensor type, response time, cost data and comments for each model. A cost code is included which shows ranges only.

NASA directives: Master list and index

NASA Technical Reports Server (NTRS)

1994-01-01

This Handbook sets forth in two parts the following information for the guidance of users of the NASA Management Directives System. Chapter 1 contains introductory information material on how to use this Handbook. Chapter 2 is a complete master list of Agency-wide management directives, describing each directive by type, number, effective date, expiration date, title, and organization code of the office responsible for the directive. Chapter 3 includes a consolidated numerical list of all delegations of authority and a breakdown of such delegation by the office of Installation to which special authority is assigned. Chapter 4 sets forth a consolidated list of all NASA Handbooks (NHB's) and important footnotes covering the control and ordering of such documents. Chapter 5 is a consolidated list of NASA management directives applicable to the Jet Propulsion Laboratory. Chapter 6 is a consolidated list of NASA management directives published in the code of Federal Regulations. Complementary manuals to the NASA Management Directives System are described in Chapter 7. Part B contains an in-depth alphabetical index to all NASA management directives other than Handbooks.

Coding of adverse events of suicidality in clinical study reports of duloxetine for the treatment of major depressive disorder: descriptive study.

PubMed

Maund, Emma; Tendal, Britta; Hróbjartsson, Asbjørn; Lundh, Andreas; Gøtzsche, Peter C

2014-06-04

To assess the effects of coding and coding conventions on summaries and tabulations of adverse events data on suicidality within clinical study reports. Systematic electronic search for adverse events of suicidality in tables, narratives, and listings of adverse events in individual patients within clinical study reports. Where possible, for each event we extracted the original term reported by the investigator, the term as coded by the medical coding dictionary, medical coding dictionary used, and the patient's trial identification number. Using the patient's trial identification number, we attempted to reconcile data on the same event between the different formats for presenting data on adverse events within the clinical study report. 9 randomised placebo controlled trials of duloxetine for major depressive disorder submitted to the European Medicines Agency for marketing approval. Clinical study reports obtained from the EMA in 2011. Six trials used the medical coding dictionary COSTART (Coding Symbols for a Thesaurus of Adverse Reaction Terms) and three used MedDRA (Medical Dictionary for Regulatory Activities). Suicides were clearly identifiable in all formats of adverse event data in clinical study reports. Suicide attempts presented in tables included both definitive and provisional diagnoses. Suicidal ideation and preparatory behaviour were obscured in some tables owing to the lack of specificity of the medical coding dictionary, especially COSTART. Furthermore, we found one event of suicidal ideation described in narrative text that was absent from tables and adverse event listings of individual patients. The reason for this is unclear, but may be due to the coding conventions used. Data on adverse events in tables in clinical study reports may not accurately represent the underlying patient data because of the medical dictionaries and coding conventions used. In clinical study reports, the listings of adverse events for individual patients and narratives of adverse events can provide additional information, including original investigator reported adverse event terms, which can enable a more accurate estimate of harms. © Maund et al 2014.

User's manual for the BNW-II optimization code for dry/wet-cooled power plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Braun, D.J.; Bamberger, J.A.; Braun, D.J.

1978-05-01

This volume provides a listing of the BNW-II dry/wet ammonia heat rejection optimization code and is an appendix to Volume I which gives a narrative description of the code's algorithms as well as logic, input and output information.

Gap Analysis of Material Properties Data for Ferritic/Martensitic HT-9 Steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Neil R.; Serrano De Caro, Magdalena; Rodriguez, Edward A.

2012-08-28

The US Department of Energy (DOE), Office of Nuclear Energy (NE), is supporting the development of an ASME Code Case for adoption of 12Cr-1Mo-VW ferritic/martensitic (F/M) steel, commonly known as HT-9, primarily for use in elevated temperature design of liquid-metal fast reactors (LMFR) and components. In 2011, Los Alamos National Laboratory (LANL) nuclear engineering staff began assisting in the development of a small modular reactor (SMR) design concept, previously known as the Hyperion Module, now called the Gen4 Module. LANL staff immediately proposed HT-9 for the reactor vessel and components, as well as fuel clad and ducting, due to itsmore » superior thermal qualities. Although the ASME material Code Case, for adoption of HT-9 as an approved elevated temperature material for LMFR service, is the ultimate goal of this project, there are several key deliverables that must first be successfully accomplished. The most important key deliverable is the research, accumulation, and documentation of specific material parameters; physical, mechanical, and environmental, which becomes the basis for an ASME Code Case. Time-independent tensile and ductility data and time-dependent creep and creep-rupture behavior are some of the material properties required for a successful ASME Code case. Although this report provides a cursory review of the available data, a much more comprehensive study of open-source data would be necessary. This report serves three purposes: (a) provides a list of already existing material data information that could ultimately be made available to the ASME Code, (b) determines the HT-9 material properties data missing from available sources that would be required and (c) estimates the necessary material testing required to close the gap. Ultimately, the gap analysis demonstrates that certain material properties testing will be required to fulfill the necessary information package for an ASME Code Case.« less

Review of Hybrid (Deterministic/Monte Carlo) Radiation Transport Methods, Codes, and Applications at Oak Ridge National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, John C; Peplow, Douglas E.; Mosher, Scott W

2010-01-01

This paper provides a review of the hybrid (Monte Carlo/deterministic) radiation transport methods and codes used at the Oak Ridge National Laboratory and examples of their application for increasing the efficiency of real-world, fixed-source Monte Carlo analyses. The two principal hybrid methods are (1) Consistent Adjoint Driven Importance Sampling (CADIS) for optimization of a localized detector (tally) region (e.g., flux, dose, or reaction rate at a particular location) and (2) Forward Weighted CADIS (FW-CADIS) for optimizing distributions (e.g., mesh tallies over all or part of the problem space) or multiple localized detector regions (e.g., simultaneous optimization of two or moremore » localized tally regions). The two methods have been implemented and automated in both the MAVRIC sequence of SCALE 6 and ADVANTG, a code that works with the MCNP code. As implemented, the methods utilize the results of approximate, fast-running 3-D discrete ordinates transport calculations (with the Denovo code) to generate consistent space- and energy-dependent source and transport (weight windows) biasing parameters. These methods and codes have been applied to many relevant and challenging problems, including calculations of PWR ex-core thermal detector response, dose rates throughout an entire PWR facility, site boundary dose from arrays of commercial spent fuel storage casks, radiation fields for criticality accident alarm system placement, and detector response for special nuclear material detection scenarios and nuclear well-logging tools. Substantial computational speed-ups, generally O(10{sup 2-4}), have been realized for all applications to date. This paper provides a brief review of the methods, their implementation, results of their application, and current development activities, as well as a considerable list of references for readers seeking more information about the methods and/or their applications.« less

Websites for Primary Sources and Civics Education

ERIC Educational Resources Information Center

Rulli, Daniel

2005-01-01

This article features a list of websites for primary sources and civics education. The World Wide Web has become an excellent source for facsimiles, images, and transcriptions of primary sources. As it would be impossible to provide a comprehensive list of all the sites, this annotated list highlights selective sites that provide access to…

Maintaining Quality and Confidence in Open-Source, Evolving Software: Lessons Learned with PFLOTRAN

NASA Astrophysics Data System (ADS)

Frederick, J. M.; Hammond, G. E.

2017-12-01

Software evolution in an open-source framework poses a major challenge to a geoscientific simulator, but when properly managed, the pay-off can be enormous for both the developers and the community at large. Developers must juggle implementing new scientific process models, adopting increasingly efficient numerical methods and programming paradigms, changing funding sources (or total lack of funding), while also ensuring that legacy code remains functional and reported bugs are fixed in a timely manner. With robust software engineering and a plan for long-term maintenance, a simulator can evolve over time incorporating and leveraging many advances in the computational and domain sciences. In this positive light, what practices in software engineering and code maintenance can be employed within open-source development to maximize the positive aspects of software evolution and community contributions while minimizing its negative side effects? This presentation will discusses steps taken in the development of PFLOTRAN (www.pflotran.org), an open source, massively parallel subsurface simulator for multiphase, multicomponent, and multiscale reactive flow and transport processes in porous media. As PFLOTRAN's user base and development team continues to grow, it has become increasingly important to implement strategies which ensure sustainable software development while maintaining software quality and community confidence. In this presentation, we will share our experiences and "lessons learned" within the context of our open-source development framework and community engagement efforts. Topics discussed will include how we've leveraged both standard software engineering principles, such as coding standards, version control, and automated testing, as well unique advantages of object-oriented design in process model coupling, to ensure software quality and confidence. We will also be prepared to discuss the major challenges faced by most open-source software teams, such as on-boarding new developers or one-time contributions, dealing with competitors or lookie-loos, and other downsides of complete transparency, as well as our approach to community engagement, including a user group email list, hosting short courses and workshops for new users, and maintaining a website. SAND2017-8174A

Syndrome source coding and its universal generalization

NASA Technical Reports Server (NTRS)

Ancheta, T. C., Jr.

1975-01-01

A method of using error-correcting codes to obtain data compression, called syndrome-source-coding, is described in which the source sequence is treated as an error pattern whose syndrome forms the compressed data. It is shown that syndrome-source-coding can achieve arbitrarily small distortion with the number of compressed digits per source digit arbitrarily close to the entropy of a binary memoryless source. A universal generalization of syndrome-source-coding is formulated which provides robustly-effective, distortionless, coding of source ensembles.

LPSN—list of prokaryotic names with standing in nomenclature

PubMed Central

Parte, Aidan C.

2014-01-01

The List of Prokaryotic Names with Standing in Nomenclature (LPSN; http://www.bacterio.net) is a database that lists the names of prokaryotes (Bacteria and Archaea) that have been validly published in the International Journal of Systematic and Evolutionary Microbiology directly or by inclusion in a Validation List, under the Rules of International Code of Nomenclature of Bacteria. Currently there are 15 974 taxa listed. In addition, LPSN has an up-to-date classification of prokaryotes and information on prokaryotic nomenclature and culture collections. PMID:24243842

Population-based evaluation of a suggested anatomic and clinical classification of congenital heart defects based on the International Paediatric and Congenital Cardiac Code.

PubMed

Houyel, Lucile; Khoshnood, Babak; Anderson, Robert H; Lelong, Nathalie; Thieulin, Anne-Claire; Goffinet, François; Bonnet, Damien

2011-10-03

Classification of the overall spectrum of congenital heart defects (CHD) has always been challenging, in part because of the diversity of the cardiac phenotypes, but also because of the oft-complex associations. The purpose of our study was to establish a comprehensive and easy-to-use classification of CHD for clinical and epidemiological studies based on the long list of the International Paediatric and Congenital Cardiac Code (IPCCC). We coded each individual malformation using six-digit codes from the long list of IPCCC. We then regrouped all lesions into 10 categories and 23 subcategories according to a multi-dimensional approach encompassing anatomic, diagnostic and therapeutic criteria. This anatomic and clinical classification of congenital heart disease (ACC-CHD) was then applied to data acquired from a population-based cohort of patients with CHD in France, made up of 2867 cases (82% live births, 1.8% stillbirths and 16.2% pregnancy terminations). The majority of cases (79.5%) could be identified with a single IPCCC code. The category "Heterotaxy, including isomerism and mirror-imagery" was the only one that typically required more than one code for identification of cases. The two largest categories were "ventricular septal defects" (52%) and "anomalies of the outflow tracts and arterial valves" (20% of cases). Our proposed classification is not new, but rather a regrouping of the known spectrum of CHD into a manageable number of categories based on anatomic and clinical criteria. The classification is designed to use the code numbers of the long list of IPCCC but can accommodate ICD-10 codes. Its exhaustiveness, simplicity, and anatomic basis make it useful for clinical and epidemiologic studies, including those aimed at assessment of risk factors and outcomes.

75 FR 80489 - Notice of Receipt of Several Pesticide Petitions Filed for Residues of Pesticide Chemicals in or...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-22

... production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code [email protected] . List of Subjects Environmental protection, Agricultural commodities, Feed additives, Food additives, Pesticides and pests, Reporting and recordkeeping requirements. Dated: December 9, 2010. Lois...

77 FR 67628 - National Fire Codes: Request for Public Input for Revision of Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-13

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology National Fire Codes: Request... Technology, Commerce. ACTION: Notice. SUMMARY: This notice contains the list of National Fire Protection... the National Fire Protection Association (NFPA) to announce the NFPA's proposal to revise some of its...

78 FR 24725 - National Fire Codes: Request for Public Input for Revision of Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-26

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology National Fire Codes: Request... Technology, Commerce. ACTION: Notice. SUMMARY: This notice contains the list of National Fire Protection... the National Fire Protection Association (NFPA) to announce the NFPA's proposal to revise some of its...

Ascertainment of Outpatient Visits by Patients with Diabetes: The National Ambulatory Medical Care Survey (NAMCS) and the National Hospital Ambulatory Medical Care Survey (NHAMCS)

PubMed Central

Asao, Keiko; McEwen, Laura N.; Lee, Joyce M.; Herman, William H.

2015-01-01

Aims To estimate and evaluate the sensitivity and specificity of providers’ diagnosis codes and medication lists to identify outpatient visits by patients with diabetes. Methods We used data from the 2006 to 2010 National Ambulatory Medical Care Survey and National Hospital Ambulatory Medical Care Survey. We assessed the sensitivity and specificity of providers’ diagnoses and medication lists to identify patients with diabetes, using the checkbox for diabetes as the gold standard. We then examined differences in sensitivity by patients’ characteristics using multivariate logistic regression models. Results The checkbox identified 12,647 outpatient visits by adults with diabetes among the 70,352 visits used for this analysis. The sensitivity and specificity of providers’ diagnoses or listed diabetes medications were 72.3% (95% CI: 70.8% to 73.8%) and 99.2% (99.1% to 99.4%), respectively. Diabetic patients ≥75 years pf age, women, non-Hispanics, and those with private insurance or Medicare were more likely to be missed by providers’ diagnoses and medication lists. Diabetic patients who had more diagnosis codes and medications recorded, had glucose or hemoglobin A1c measured, or made office- rather than hospital-outpatient visits were less likely to be missed. Conclusions Providers’ diagnosis codes and medication lists fail to identify approximately one quarter of outpatient visits by patients with diabetes. PMID:25891975

Fully-Coupled Fluid/Structure Vibration Analysis Using MSC/NASTRAN

NASA Technical Reports Server (NTRS)

Fernholz, Christian M.; Robinson, Jay H.

1996-01-01

MSC/NASTRAN's performance in the solution of fully-coupled fluid/structure problems is evaluated. NASTRAN is used to perform normal modes (SOL 103) and forced-response analyses (SOL 108, 111) on cylindrical and cubic fluid/structure models. Bulk data file cards unique to the specification of a fluid element are discussed and analytic partially-coupled solutions are derived for each type of problem. These solutions are used to evaluate NASTRAN's solutions for accuracy. Appendices to this work include NASTRAN data presented in fringe plot form, FORTRAN source code listings written in support of this work, and NASTRAN data file usage requirements for each analysis.

Residential Carpentry Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for nine occupations in the residential carpentry series. Each occupation is divided into a number of duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to…

Printing Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for 10 occupations in the printing series. Each occupation is divided into a number of duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to provide space for…

Marketing Education/Business Management & Ownership Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for eight occupations in the marketing education/business management and ownership series. Each occupation is divided into 4 to 12 duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular…

Emergency Medical Technician Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for 12 duties in the occupation of emergency medical technician. Each duty is divided into a number of tasks. A separate page for each duty lists the task with its code number and columns to indicate whether that particular duty has been taught and to provide space for comments. The 12 duties…

Business & Office Accounting/Bookkeeping Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for five occupations in the business and office accounting/bookkeeping series. Each occupation is divided into four to six duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has…

Banking and Financial Services Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for five occupations in the banking and financial services series. Each occupation is divided into seven or eight duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been…

Business and Office Managerial Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for three occupations in the business and office managerial series. Each occupation is divided into seven duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to…

Business & Office Secretarial Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for 11 occupations in the business and office secretarial series. Each occupation is divided into three to seven duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught…

Diesel Mechanics Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for 11 occupations in the diesel mechanics series. Each occupation is divided into a number of duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to provide…

Auto Mechanics Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for eight occupations in the auto mechanics series. Each occupation is divided into a number of duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to provide…

Welding Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for six occupations in the welding series. Each occupation is divided into a number of duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to provide space for…

Fashion Merchandising Series. Duty Task List.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains the occupational duty/task lists for seven occupations in the fashion merchandising series. Each occupation is divided into 6 to 15 duties. A separate page for each duty in the occupation lists the tasks in that duty along with its code number and columns to indicate whether that particular duty has been taught and to…

Multidimensional Trellis Coded Phase Modulation Using a Multilevel Concatenation Approach. Part 2; Codes for AWGN and Fading Channels

NASA Technical Reports Server (NTRS)

Rajpal, Sandeep; Rhee, DoJun; Lin, Shu

1997-01-01

In this paper, we will use the construction technique proposed in to construct multidimensional trellis coded modulation (TCM) codes for both the additive white Gaussian noise (AWGN) and the fading channels. Analytical performance bounds and simulation results show that these codes perform very well and achieve significant coding gains over uncoded reference modulation systems. In addition, the proposed technique can be used to construct codes which have a performance/decoding complexity advantage over the codes listed in literature.

General RMP Guidance - Appendix B: Selected NAICS Codes

EPA Pesticide Factsheets

This appendix contains a list of selected 2002 North American Industry Classification System (NAICS) codes used by Federal statistical agencies, in designating business types or functions in categories such as farming, manufacturing, and waste management.

77 FR 8755 - Receipt of a Pesticide Petition Filed for Temporary Tolerance Exemption for Residues of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-15

... manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be... Environmental protection, Agricultural commodities, Feed additives, Food additives, Pesticides and pests...

SUPPLEMENT: “GOING THE DISTANCE: MAPPING HOST GALAXIES OF LIGO AND VIRGO SOURCES IN THREE DIMENSIONS USING LOCAL COSMOGRAPHY AND TARGETED FOLLOW-UP” (2016, ApJL, 829, L15)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singer, Leo P.; Cenko, S. Bradley; Gehrels, Neil

This is a supplement to the Letter of Singer et al., in which we demonstrated a rapid algorithm for obtaining joint 3D estimates of sky location and luminosity distance from observations of binary neutron star mergers with Advanced LIGO and Virgo. We argued that combining the reconstructed volumes with positions and redshifts of possible host galaxies can provide large-aperture but small field of view instruments with a manageable list of targets to search for optical or infrared emission. In this Supplement, we document the new HEALPix-based file format for 3D localizations of gravitational-wave transients. We include Python sample code tomore » show the reader how to perform simple manipulations of the 3D sky maps and extract ranked lists of likely host galaxies. Finally, we include mathematical details of the rapid volume reconstruction algorithm.« less

Raster graphics display library

NASA Technical Reports Server (NTRS)

Grimsrud, Anders; Stephenson, Michael B.

1987-01-01

The Raster Graphics Display Library (RGDL) is a high level subroutine package that give the advanced raster graphics display capabilities needed. The RGDL uses FORTRAN source code routines to build subroutines modular enough to use as stand-alone routines in a black box type of environment. Six examples are presented which will teach the use of RGDL in the fastest, most complete way possible. Routines within the display library that are used to produce raster graphics are presented in alphabetical order, each on a separate page. Each user-callable routine is described by function and calling parameters. All common blocks that are used in the display library are listed and the use of each variable within each common block is discussed. A reference on the include files that are necessary to compile the display library is contained. Each include file and its purpose are listed. The link map for MOVIE.BYU version 6, a general purpose computer graphics display system that uses RGDL software, is also contained.

Definition and testing of the hydrologic component of the pilot land data system

NASA Technical Reports Server (NTRS)

Ragan, Robert M.; Sircar, Jayanta K.

1987-01-01

The specific aim was to develop within the Pilot Land Data System (PLDS) software design environment, an easily implementable and user friendly geometric correction procedure to readily enable the georeferencing of imagery data from the Advanced Very High Resolution Radiometer (AVHRR) onboard the NOAA series spacecraft. A software subsystem was developed within the guidelines set by the PLDS development environment utilizing NASA Goddard Space Flight Center (GSFC) Image Analysis Facility's (IAF's) Land Analysis Software (LAS) coding standards. The IAS current program development environment, the Transportable Applications Executive (TAE), operates under a VAX VMS operating system and was used as the user interface. A brief overview of the ICARUS algorithm that was implemented in the set of functions developed, is provided. The functional specifications decription is provided, and a list of the individual programs and directory names containing the source and executables installed in the IAF system are listed. A user guide is provided for the LAS system documentation format for the three functions developed.

Test Operations Procedure (TOP) 01-2-624 High Power Microwave (HPM) Testing

DTIC Science & Technology

2015-07-06

Requests _____ The proposed frequency list for the HPM facility is listed below. Source Primary Frequencies (MHz) Alternate Frequencies (MHz) NBTS...during testing. The proposed frequency list for the HPM facility is listed below. Source Primary Frequencies (MHz) Alternate Frequencies (MHz

30 CFR 50.20-5 - Criteria-MSHA Form 7000-1, Section B.

Code of Federal Regulations, 2010 CFR

2010-07-01

... following list which best defines the accident: Code 01—A death of an individual at a mine; Code 02—An injury to an individual at a mine which has a reasonable potential to cause death; Code 03—An entrapment... more than thirty minutes; and Code 12—An event at a mine which causes death or bodily injury to an...

40 CFR 265.340 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... (b) Integration of the MACT standards. (1) Except as provided by paragraphs (b)(2) and (b)(3) of this... 261, subpart D, of this chapter solely because it is ignitable (Hazard Code I), corrosive (Hazard Code... because it is reactive (Hazard Code R) for characteristics other than those listed in § 261.23(a) (4) and...

40 CFR 265.340 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... (b) Integration of the MACT standards. (1) Except as provided by paragraphs (b)(2) and (b)(3) of this... 261, subpart D, of this chapter solely because it is ignitable (Hazard Code I), corrosive (Hazard Code... because it is reactive (Hazard Code R) for characteristics other than those listed in § 261.23(a) (4) and...

40 CFR 265.340 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... (b) Integration of the MACT standards. (1) Except as provided by paragraphs (b)(2) and (b)(3) of this... 261, subpart D, of this chapter solely because it is ignitable (Hazard Code I), corrosive (Hazard Code... because it is reactive (Hazard Code R) for characteristics other than those listed in § 261.23(a) (4) and...

78 FR 37848 - ASME Code Cases Not Approved for Use

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-24

...The U.S. Nuclear Regulatory Commission (NRC) is issuing for public comment draft regulatory guide (DG), DG-1233, ``ASME Code Cases not Approved for Use.'' This regulatory guide lists the American Society of Mechanical Engineers (ASME) Code Cases that the NRC has determined not to be acceptable for use on a generic basis.

A computational model for the prediction of jet entrainment in the vicinity of nozzle boattails (The BOAT code)

NASA Technical Reports Server (NTRS)

Dash, S. M.; Pergament, H. S.

1978-01-01

The basic code structure is discussed, including the overall program flow and a brief description of all subroutines. Instructions on the preparation of input data, definitions of key FORTRAN variables, sample input and output, and a complete listing of the code are presented.

78 FR 59265 - FD&C Yellow No. 5; Exemption From the Requirement of a Tolerance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-26

... (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). B. How.... 5 is a FDA permanently listed color additive used in food, drugs and cosmetics, including drugs and cosmetics for the eye area. FDA's color additive evaluation included the consideration of an extensive set...

The Primary Care Electronic Library: RSS feeds using SNOMED-CT indexing for dynamic content delivery.

PubMed

Robinson, Judas; de Lusignan, Simon; Kostkova, Patty; Madge, Bruce; Marsh, A; Biniaris, C

2006-01-01

Rich Site Summary (RSS) feeds are a method for disseminating and syndicating the contents of a website using extensible mark-up language (XML). The Primary Care Electronic Library (PCEL) distributes recent additions to the site in the form of an RSS feed. When new resources are added to PCEL, they are manually assigned medical subject headings (MeSH terms), which are then automatically mapped to SNOMED-CT terms using the Unified Medical Language System (UMLS) Metathesaurus. The library is thus searchable using MeSH or SNOMED-CT. Our syndicate partner wished to have remote access to PCEL coronary heart disease (CHD) information resources based on SNOMED-CT search terms. To pilot the supply of relevant information resources in response to clinically coded requests, using RSS syndication for transmission between web servers. Our syndicate partner provided a list of CHD SNOMED-CT terms to its end-users, a list which was coded according to UMLS specifications. When the end-user requested relevant information resources, this request was relayed from our syndicate partner's web server to the PCEL web server. The relevant resources were retrieved from the PCEL MySQL database. This database is accessed using a server side scripting language (PHP), which enables the production of dynamic RSS feeds on the basis of Source Asserted Identifiers (CODEs) contained in UMLS. Retrieving resources using SNOMED-CT terms using syndication can be used to build a functioning application. The process from request to display of syndicated resources took less than one second. The results of the pilot illustrate that it is possible to exchange data between servers using RSS syndication. This method could be utilised dynamically to supply digital library resources to a clinical system with SNOMED-CT data used as the standard of reference.

Defense RDT&E Online System (DROLS) Handbook

DTIC Science & Technology

1993-07-01

of the descriptor TROPICAL DISEASES hierarchically will produce the same results as a cumulated search of the following terms: CHOLERA DENGUE ...Header List The Source header List is a two volume listing of all source names arranged in alphabetical order. Each en ~try consists of: Source Name...BB Belgium ................................................................ BE Belize

Jewish Studies: A Guide to Reference Sources.

ERIC Educational Resources Information Center

McGill Univ., Montreal (Quebec). McLennan Library.

An annotated bibliography to the reference sources for Jewish Studies in the McLennan Library of McGill University (Canada) is presented. Any titles in Hebrew characters are listed by their transliterated equivalents. There is also a list of relevant Library of Congress Subject Headings. General reference sources listed are: encyclopedias,…

VaST: A variability search toolkit

NASA Astrophysics Data System (ADS)

Sokolovsky, K. V.; Lebedev, A. A.

2018-01-01

Variability Search Toolkit (VaST) is a software package designed to find variable objects in a series of sky images. It can be run from a script or interactively using its graphical interface. VaST relies on source list matching as opposed to image subtraction. SExtractor is used to generate source lists and perform aperture or PSF-fitting photometry (with PSFEx). Variability indices that characterize scatter and smoothness of a lightcurve are computed for all objects. Candidate variables are identified as objects having high variability index values compared to other objects of similar brightness. The two distinguishing features of VaST are its ability to perform accurate aperture photometry of images obtained with non-linear detectors and handle complex image distortions. The software has been successfully applied to images obtained with telescopes ranging from 0.08 to 2.5 m in diameter equipped with a variety of detectors including CCD, CMOS, MIC and photographic plates. About 1800 variable stars have been discovered with VaST. It is used as a transient detection engine in the New Milky Way (NMW) nova patrol. The code is written in C and can be easily compiled on the majority of UNIX-like systems. VaST is free software available at http://scan.sai.msu.ru/vast/.

Computer-program documentation of an interactive-accounting model to simulate streamflow, water quality, and water-supply operations in a river basin

USGS Publications Warehouse

Burns, A.W.

1988-01-01

This report describes an interactive-accounting model used to simulate streamflow, chemical-constituent concentrations and loads, and water-supply operations in a river basin. The model uses regression equations to compute flow from incremental (internode) drainage areas. Conservative chemical constituents (typically dissolved solids) also are computed from regression equations. Both flow and water quality loads are accumulated downstream. Optionally, the model simulates the water use and the simplified groundwater systems of a basin. Water users include agricultural, municipal, industrial, and in-stream users , and reservoir operators. Water users list their potential water sources, including direct diversions, groundwater pumpage, interbasin imports, or reservoir releases, in the order in which they will be used. Direct diversions conform to basinwide water law priorities. The model is interactive, and although the input data exist in files, the user can modify them interactively. A major feature of the model is its color-graphic-output options. This report includes a description of the model, organizational charts of subroutines, and examples of the graphics. Detailed format instructions for the input data, example files of input data, definitions of program variables, and listing of the FORTRAN source code are Attachments to the report. (USGS)

76 FR 82238 - Receipt of Several Pesticide Petitions Filed for Residues of Pesticide Chemicals in or on Various...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

... manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not intended to be... Environmental protection, Agricultural commodities, Feed additives, Food additives, Pesticides and pests...

78 FR 13338 - Exposure Modeling Public Meeting; Notice of Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-27

... code 22 Professional, Scientific and Technical NAICS code 54 B. How can I get copies of this document... dates and abstract requests are announced through the ``empmlist'' forum on the LYRIS list server at...

Monte Carlo Particle Lists: MCPL

NASA Astrophysics Data System (ADS)

Kittelmann, T.; Klinkby, E.; Knudsen, E. B.; Willendrup, P.; Cai, X. X.; Kanaki, K.

2017-09-01

A binary format with lists of particle state information, for interchanging particles between various Monte Carlo simulation applications, is presented. Portable C code for file manipulation is made available to the scientific community, along with converters and plugins for several popular simulation packages.

Status of thermalhydraulic modelling and assessment: Open issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bestion, D.; Barre, F.

1997-07-01

This paper presents the status of the physical modelling in present codes used for Nuclear Reactor Thermalhydraulics (TRAC, RELAP 5, CATHARE, ATHLET,...) and attempts to list the unresolved or partially resolved issues. First, the capabilities and limitations of present codes are presented. They are mainly known from a synthesis of the assessment calculations performed for both separate effect tests and integral effect tests. It is also interesting to list all the assumptions and simplifications which were made in the establishment of the system of equations and of the constitutive relations. Many of the present limitations are associated to physical situationsmore » where these assumptions are not valid. Then, recommendations are proposed to extend the capabilities of these codes.« less

An evaluation of the quality of obstetric morbidity coding using an objective assessment tool, the Performance Indicators For Coding Quality (PICQ).

PubMed

Lamb, Mary K; Innes, Kerry; Saad, Patricia; Rust, Julie; Dimitropoulos, Vera; Cumerlato, Megan

The Performance Indicators for Coding Quality (PICQ) is a data quality assessment tool developed by Australia's National Centre for Classification in Health (NCCH). PICQ consists of a number of indicators covering all ICD-10-AM disease chapters, some procedure chapters from the Australian Classification of Health Intervention (ACHI) and some Australian Coding Standards (ACS). The indicators can be used to assess the coding quality of hospital morbidity data by monitoring compliance of coding conventions and ACS; this enables the identification of particular records that may be incorrectly coded, thus providing a measure of data quality. There are 31 obstetric indicators available for the ICD-10-AM Fourth Edition. Twenty of these 31 indicators were classified as Fatal, nine as Warning and two Relative. These indicators were used to examine coding quality of obstetric records in the 2004-2005 financial year Australian national hospital morbidity dataset. Records with obstetric disease or procedure codes listed anywhere in the code string were extracted and exported from the SPSS source file. Data were then imported into a Microsoft Access database table as per PICQ instructions, and run against all Fatal and Warning and Relative (N=31) obstetric PICQ 2006 Fourth Edition Indicators v.5 for the ICD-10- AM Fourth Edition. There were 689,905 gynaecological and obstetric records in the 2004-2005 financial year, of which 1.14% were found to have triggered Fatal degree errors, 3.78% Warning degree errors and 8.35% Relative degree errors. The types of errors include completeness, redundancy, specificity and sequencing problems. It was found that PICQ is a useful initial screening tool for the assessment of ICD-10-AM/ACHI coding quality. The overall quality of codes assigned to obstetric records in the 2004- 2005 Australian national morbidity dataset is of fair quality.

A method and knowledge base for automated inference of patient problems from structured data in an electronic medical record.

PubMed

Wright, Adam; Pang, Justine; Feblowitz, Joshua C; Maloney, Francine L; Wilcox, Allison R; Ramelson, Harley Z; Schneider, Louise I; Bates, David W

2011-01-01

Accurate knowledge of a patient's medical problems is critical for clinical decision making, quality measurement, research, billing and clinical decision support. Common structured sources of problem information include the patient problem list and billing data; however, these sources are often inaccurate or incomplete. To develop and validate methods of automatically inferring patient problems from clinical and billing data, and to provide a knowledge base for inferring problems. We identified 17 target conditions and designed and validated a set of rules for identifying patient problems based on medications, laboratory results, billing codes, and vital signs. A panel of physicians provided input on a preliminary set of rules. Based on this input, we tested candidate rules on a sample of 100,000 patient records to assess their performance compared to gold standard manual chart review. The physician panel selected a final rule for each condition, which was validated on an independent sample of 100,000 records to assess its accuracy. Seventeen rules were developed for inferring patient problems. Analysis using a validation set of 100,000 randomly selected patients showed high sensitivity (range: 62.8-100.0%) and positive predictive value (range: 79.8-99.6%) for most rules. Overall, the inference rules performed better than using either the problem list or billing data alone. We developed and validated a set of rules for inferring patient problems. These rules have a variety of applications, including clinical decision support, care improvement, augmentation of the problem list, and identification of patients for research cohorts.

FPT- FORTRAN PROGRAMMING TOOLS FOR THE DEC VAX

NASA Technical Reports Server (NTRS)

Ragosta, A. E.

1994-01-01

The FORTRAN Programming Tools (FPT) are a series of tools used to support the development and maintenance of FORTRAN 77 source codes. Included are a debugging aid, a CPU time monitoring program, source code maintenance aids, print utilities, and a library of useful, well-documented programs. These tools assist in reducing development time and encouraging high quality programming. Although intended primarily for FORTRAN programmers, some of the tools can be used on data files and other programming languages. BUGOUT is a series of FPT programs that have proven very useful in debugging a particular kind of error and in optimizing CPU-intensive codes. The particular type of error is the illegal addressing of data or code as a result of subtle FORTRAN errors that are not caught by the compiler or at run time. A TRACE option also allows the programmer to verify the execution path of a program. The TIME option assists the programmer in identifying the CPU-intensive routines in a program to aid in optimization studies. Program coding, maintenance, and print aids available in FPT include: routines for building standard format subprogram stubs; cleaning up common blocks and NAMELISTs; removing all characters after column 72; displaying two files side by side on a VT-100 terminal; creating a neat listing of a FORTRAN source code including a Table of Contents, an Index, and Page Headings; converting files between VMS internal format and standard carriage control format; changing text strings in a file without using EDT; and replacing tab characters with spaces. The library of useful, documented programs includes the following: time and date routines; a string categorization routine; routines for converting between decimal, hex, and octal; routines to delay process execution for a specified time; a Gaussian elimination routine for solving a set of simultaneous linear equations; a curve fitting routine for least squares fit to polynomial, exponential, and sinusoidal forms (with a screen-oriented editor); a cubic spline fit routine; a screen-oriented array editor; routines to support parsing; and various terminal support routines. These FORTRAN programming tools are written in FORTRAN 77 and ASSEMBLER for interactive and batch execution. FPT is intended for implementation on DEC VAX series computers operating under VMS. This collection of tools was developed in 1985.

Nurses' attitudes toward the use of the bar-coding medication administration system.

PubMed

Marini, Sana Daya; Hasman, Arie; Huijer, Huda Abu-Saad; Dimassi, Hani

2010-01-01

This study determines nurses' attitudes toward bar-coding medication administration system use. Some of the factors underlying the successful use of bar-coding medication administration systems that are viewed as a connotative indicator of users' attitudes were used to gather data that describe the attitudinal basis for system adoption and use decisions in terms of subjective satisfaction. Only 67 nurses in the United States had the chance to respond to the e-questionnaire posted on the CARING list server for the months of June and July 2007. Participants rated their satisfaction with bar-coding medication administration system use based on system functionality, usability, and its positive/negative impact on the nursing practice. Results showed, to some extent, positive attitude, but the image profile draws attention to nurses' concerns for improving certain system characteristics. The high bar-coding medication administration system skills revealed a more negative perception of the system by the nursing staff. The reasons underlying dissatisfaction with bar-coding medication administration use by skillful users are an important source of knowledge that can be helpful for system development as well as system deployment. As a result, strengthening bar-coding medication administration system usability by magnifying its ability to eliminate medication errors and the contributing factors, maximizing system functionality by ascertaining its power as an extra eye in the medication administration process, and impacting the clinical nursing practice positively by being helpful to nurses, speeding up the medication administration process, and being user-friendly can offer a congenial settings for establishing positive attitude toward system use, which in turn leads to successful bar-coding medication administration system use.

NASA Parts Selection List (NPSL) WWW Site http://nepp.nasa.gov/npsl

NASA Technical Reports Server (NTRS)

Brusse, Jay

2000-01-01

The NASA Parts Selection List (NPSL) is an on-line resource for electronic parts selection tailored for use by spaceflight projects. The NPSL provides a list of commonly used electronic parts that have a history of satisfactory use in spaceflight applications. The objective of this www site is to provide NASA projects, contractors, university experimenters, et al with an easy to use resource that provides a baseline of electronic parts from which designers are encouraged to select. The NPSL is an ongoing resource produced by Code 562 in support of the NASA HQ funded NASA Electronic Parts and Packaging (NEPP) Program. The NPSL is produced as an electronic format deliverable made available via the referenced www site administered by Code 562. The NPSL does not provide information pertaining to patented or proprietary information. All of the information contained in the NPSL is available through various other public domain resources such as US Military procurement specifications for electronic parts, NASA GSFC's Preferred Parts List (PPL-21), and NASA's Standard Parts List (MIL-STD975).

Using National Drug Codes and drug knowledge bases to organize prescription records from multiple sources.

PubMed

Simonaitis, Linas; McDonald, Clement J

2009-10-01

The utility of National Drug Codes (NDCs) and drug knowledge bases (DKBs) in the organization of prescription records from multiple sources was studied. The master files of most pharmacy systems include NDCs and local codes to identify the products they dispense. We obtained a large sample of prescription records from seven different sources. These records carried a national product code or a local code that could be translated into a national product code via their formulary master. We obtained mapping tables from five DKBs. We measured the degree to which the DKB mapping tables covered the national product codes carried in or associated with the sample of prescription records. Considering the total prescription volume, DKBs covered 93.0-99.8% of the product codes from three outpatient sources and 77.4-97.0% of the product codes from four inpatient sources. Among the in-patient sources, invented codes explained 36-94% of the noncoverage. Outpatient pharmacy sources rarely invented codes, which comprised only 0.11-0.21% of their total prescription volume, compared with inpatient pharmacy sources for which invented codes comprised 1.7-7.4% of their prescription volume. The distribution of prescribed products was highly skewed, with 1.4-4.4% of codes accounting for 50% of the message volume and 10.7-34.5% accounting for 90% of the message volume. DKBs cover the product codes used by outpatient sources sufficiently well to permit automatic mapping. Changes in policies and standards could increase coverage of product codes used by inpatient sources.

[Exposed workers to lung cancer risk. An estimation using the ISPESL database of enterprises].

PubMed

Scarselli, Alberto; Marinaccio, Alessandro; Nesti, Massimo

2007-01-01

lung cancer is the first cause of death in the industrialized country among males and is increasing among females. In 2001 a uniform and standardised list of occupations or jobs known or suspected to be associated with lung cancer has been prepared. The aim of this study is to set up a database of Italian enterprises corresponding to activities related to this list and to assess the number of potentially exposed workers. a detailed and unique list of codes, referred to Ateco91 ISTAT classification with exclusion of the State Railways and the public administration sectors, has been developed. The list is divided into two categories: respectively for occupations or jobs definitely entailing carcinogenic risk and for those which probably/possibly entail a risk. Firms have been selected from the ISPESL database of enterprises and the number of workers has been estimated on the basis of this list. Italy. assessment of the number of workers potentially exposed to lung cancer risk and creation of a register of involved firms. the number of potentially exposed workers in the industrial and services sector related to lung cancer risk is 650,886 blue collars and the number of firms censused in Italy is 117,006 units. Corresponding figures in the agriculture sector are 163,340 and 84,839. This type of evaluation, being based on administrative sources rather then on direct measures of exposure, certainly includes an overestimation of exposed workers. the lists based on a standard classification which have been created allow for the creation of databases which can be used to control occupational exposure to carcinogens and to increase comparability between epidemiologic studies based on job-exposure matrix.

WebGIVI: a web-based gene enrichment analysis and visualization tool.

PubMed

Sun, Liang; Zhu, Yongnan; Mahmood, A S M Ashique; Tudor, Catalina O; Ren, Jia; Vijay-Shanker, K; Chen, Jian; Schmidt, Carl J

2017-05-04

A major challenge of high throughput transcriptome studies is presenting the data to researchers in an interpretable format. In many cases, the outputs of such studies are gene lists which are then examined for enriched biological concepts. One approach to help the researcher interpret large gene datasets is to associate genes and informative terms (iTerm) that are obtained from the biomedical literature using the eGIFT text-mining system. However, examining large lists of iTerm and gene pairs is a daunting task. We have developed WebGIVI, an interactive web-based visualization tool ( http://raven.anr.udel.edu/webgivi/ ) to explore gene:iTerm pairs. WebGIVI was built via Cytoscape and Data Driven Document JavaScript libraries and can be used to relate genes to iTerms and then visualize gene and iTerm pairs. WebGIVI can accept a gene list that is used to retrieve the gene symbols and corresponding iTerm list. This list can be submitted to visualize the gene iTerm pairs using two distinct methods: a Concept Map or a Cytoscape Network Map. In addition, WebGIVI also supports uploading and visualization of any two-column tab separated data. WebGIVI provides an interactive and integrated network graph of gene and iTerms that allows filtering, sorting, and grouping, which can aid biologists in developing hypothesis based on the input gene lists. In addition, WebGIVI can visualize hundreds of nodes and generate a high-resolution image that is important for most of research publications. The source code can be freely downloaded at https://github.com/sunliang3361/WebGIVI . The WebGIVI tutorial is available at http://raven.anr.udel.edu/webgivi/tutorial.php .

Milagro Observations of Potential TeV Emitters

NASA Technical Reports Server (NTRS)

Abdo, A. A.; Abeysekara, A. U.; Allen, B. T.; Aune, T.; Barber, A. S.; Berley, D.; Braun, J.; Chen, C.; Christopher, G. E.; DeYoung, T.;

78 FR 57219 - Proposed Collection; Comment Request for Form 4562

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-17

... 4562, Depreciation and Amortization (Including Information on Listed Property). DATES: Written comments... and Amortization (Including Information on Listed Property). OMB Number: 1545-0172. Form Number: Form... election to expense certain tangible property under Internal Revenue Code section 179; and to provide...

Catalog of Federal metrology and calibration capabilities: 1980 edition

NASA Astrophysics Data System (ADS)

Leedy, K. O.

1980-09-01

Federal laboratories involved in metrology and calibration are listed. Included is the name of a person to contact at each laboratory telephone number and address. The capabilities of each laboratory are indicated in a tabular listing by agency. To provide geographical distribution, the laboratories are listed by States. In addition, the laboratories are shown on a map by coded number. Other references are described.

Microcomputer pollution model for civilian airports and Air Force bases. Model description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Segal, H.M.; Hamilton, P.L.

1988-08-01

This is one of three reports describing the Emissions and Dispersion Modeling System (EDMS). EDMS is a complex source emissions/dispersion model for use at civilian airports and Air Force bases. It operates in both a refined and a screening mode and is programmed for an IBM-XT (or compatible) computer. This report--MODEL DESCRIPTION--provides the technical description of the model. It first identifies the key design features of both the emissions (EMISSMOD) and dispersion (GIMM) portions of EDMS. It then describes the type of meteorological information the dispersion model can accept and identifies the manner in which it preprocesses National Climatic Centermore » (NCC) data prior to a refined-model run. The report presents the results of running EDMS on a number of different microcomputers and compares EDMS results with those of comparable models. The appendices elaborate on the information noted above and list the source code.« less

Software support for SBGN maps: SBGN-ML and LibSBGN.

PubMed

van Iersel, Martijn P; Villéger, Alice C; Czauderna, Tobias; Boyd, Sarah E; Bergmann, Frank T; Luna, Augustin; Demir, Emek; Sorokin, Anatoly; Dogrusoz, Ugur; Matsuoka, Yukiko; Funahashi, Akira; Aladjem, Mirit I; Mi, Huaiyu; Moodie, Stuart L; Kitano, Hiroaki; Le Novère, Nicolas; Schreiber, Falk

2012-08-01

LibSBGN is a software library for reading, writing and manipulating Systems Biology Graphical Notation (SBGN) maps stored using the recently developed SBGN-ML file format. The library (available in C++ and Java) makes it easy for developers to add SBGN support to their tools, whereas the file format facilitates the exchange of maps between compatible software applications. The library also supports validation of maps, which simplifies the task of ensuring compliance with the detailed SBGN specifications. With this effort we hope to increase the adoption of SBGN in bioinformatics tools, ultimately enabling more researchers to visualize biological knowledge in a precise and unambiguous manner. Milestone 2 was released in December 2011. Source code, example files and binaries are freely available under the terms of either the LGPL v2.1+ or Apache v2.0 open source licenses from http://libsbgn.sourceforge.net. sbgn-libsbgn@lists.sourceforge.net.

RF model of the distribution system as a communication channel, phase 2. Volume 4: Sofware source program and illustrations ASCII database listings

NASA Technical Reports Server (NTRS)

Rustay, R. C.; Gajjar, J. T.; Rankin, R. W.; Wentz, R. C.; Wooding, R.

1982-01-01

Listings of source programs and some illustrative examples of various ASCII data base files are presented. The listings are grouped into the following categories: main programs, subroutine programs, illustrative ASCII data base files. Within each category files are listed alphabetically.

Metabolic basis for the self-referential genetic code.

PubMed

Guimarães, Romeu Cardoso

2011-08-01

An investigation of the biosynthesis pathways producing glycine and serine was necessary to clarify an apparent inconsistency between the self-referential model (SRM) for the formation of the genetic code and the model of coevolution of encodings and of amino acid biosynthesis routes. According to the SRM proposal, glycine was the first amino acid encoded, followed by serine. The coevolution model does not state precisely which the first encodings were, only presenting a list of about ten early assignments including the derivation of glycine from serine-this being derived from the glycolysis intermediate glycerate, which reverses the order proposed by the self-referential model. Our search identified the glycine-serine pathway of syntheses based on one-carbon sources, involving activities of the glycine decarboxylase complex and its associated serine hydroxymethyltransferase, which is consistent with the order proposed by the self-referential model and supports its rationale for the origin of the genetic code: protein synthesis was developed inside an early metabolic system, serving the function of a sink of amino acids; the first peptides were glycine-rich and fit for the function of building the early ribonucleoproteins; glycine consumption in proteins drove the fixation of the glycine-serine pathway.

ADESSA: A Real-Time Decision Support Service for Delivery of Semantically Coded Adverse Drug Event Data

PubMed Central

Duke, Jon D.; Friedlin, Jeff

2010-01-01

Evaluating medications for potential adverse events is a time-consuming process, typically involving manual lookup of information by physicians. This process can be expedited by CDS systems that support dynamic retrieval and filtering of adverse drug events (ADE’s), but such systems require a source of semantically-coded ADE data. We created a two-component system that addresses this need. First we created a natural language processing application which extracts adverse events from Structured Product Labels and generates a standardized ADE knowledge base. We then built a decision support service that consumes a Continuity of Care Document and returns a list of patient-specific ADE’s. Our database currently contains 534,125 ADE’s from 5602 product labels. An NLP evaluation of 9529 ADE’s showed recall of 93% and precision of 95%. On a trial set of 30 CCD’s, the system provided adverse event data for 88% of drugs and returned these results in an average of 620ms. PMID:21346964

Aperture Photometry Tool

NASA Astrophysics Data System (ADS)

Laher, Russ R.; Gorjian, Varoujan; Rebull, Luisa M.; Masci, Frank J.; Fowler, John W.; Helou, George; Kulkarni, Shrinivas R.; Law, Nicholas M.

2012-07-01

Aperture Photometry Tool (APT) is software for astronomers and students interested in manually exploring the photometric qualities of astronomical images. It is a graphical user interface (GUI) designed to allow the image data associated with aperture photometry calculations for point and extended sources to be visualized and, therefore, more effectively analyzed. The finely tuned layout of the GUI, along with judicious use of color-coding and alerting, is intended to give maximal user utility and convenience. Simply mouse-clicking on a source in the displayed image will instantly draw a circular or elliptical aperture and sky annulus around the source and will compute the source intensity and its uncertainty, along with several commonly used measures of the local sky background and its variability. The results are displayed and can be optionally saved to an aperture-photometry-table file and plotted on graphs in various ways using functions available in the software. APT is geared toward processing sources in a small number of images and is not suitable for bulk processing a large number of images, unlike other aperture photometry packages (e.g., SExtractor). However, APT does have a convenient source-list tool that enables calculations for a large number of detections in a given image. The source-list tool can be run either in automatic mode to generate an aperture photometry table quickly or in manual mode to permit inspection and adjustment of the calculation for each individual detection. APT displays a variety of useful graphs with just the push of a button, including image histogram, x and y aperture slices, source scatter plot, sky scatter plot, sky histogram, radial profile, curve of growth, and aperture-photometry-table scatter plots and histograms. APT has many functions for customizing the calculations, including outlier rejection, pixel “picking” and “zapping,” and a selection of source and sky models. The radial-profile-interpolation source model, which is accessed via the radial-profile-plot panel, allows recovery of source intensity from pixels with missing data and can be especially beneficial in crowded fields.

Facilitating Internet-Scale Code Retrieval

ERIC Educational Resources Information Center

Bajracharya, Sushil Krishna

2010-01-01

Internet-Scale code retrieval deals with the representation, storage, and access of relevant source code from a large amount of source code available on the Internet. Internet-Scale code retrieval systems support common emerging practices among software developers related to finding and reusing source code. In this dissertation we focus on some…

The first Extreme Ultraviolet Explorer source catalog

NASA Technical Reports Server (NTRS)

Bowyer, S.; Lieu, R.; Lampton, M.; Lewis, J.; Wu, X.; Drake, J. J.; Malina, R. F.

1994-01-01

The Extreme Ultraviolet Explorer (EUVE) has conducted an all-sky survey to locate and identify point sources of emission in four extreme ultraviolet wavelength bands centered at approximately 100, 200, 400, and 600 A. A companion deep survey of a strip along half the ecliptic plane was simultaneously conducted. In this catalog we report the sources found in these surveys using rigorously defined criteria uniformly applied to the data set. These are the first surveys to be made in the three longer wavelength bands, and a substantial number of sources were detected in these bands. We present a number of statistical diagnostics of the surveys, including their source counts, their sensitivites, and their positional error distributions. We provide a separate list of those sources reported in the EUVE Bright Source List which did not meet our criteria for inclusion in our primary list. We also provide improved count rate and position estimates for a majority of these sources based on the improved methodology used in this paper. In total, this catalog lists a total of 410 point sources, of which 372 have plausible optical ultraviolet, or X-ray identifications, which are also listed.

Employment Sources on the Internet; Placements and Salaries 2001: Salaries Rebound, Women Break Out; Accredited Master's Programs in Library and Information Studies; Library Scholarship Sources; Library Scholarship and Award Recipients, 2002.

ERIC Educational Resources Information Center

Barr, Catherine; Terrell, Tom

2003-01-01

These five articles report on library and information science employment sources on the Internet; librarians' placement and salary trends, including library school graduates, gender differences, and minorities; a list of accredited Mater's programs; a list of library scholarship sources; and a list of library scholarship and award recipients. (LRW)

Midwestern Medieval Illuminations Archives.

ERIC Educational Resources Information Center

Purdue Univ., Lafayette, IN. Audio-Visual Center.

This catalog lists the slides of medieval manuscript illuminations available at the Midwestern Medieval Illuminations Archives at the Purdue University Audio-Visual Center. Instructions are provided for ordering slides from the Center. Slide sets are listed by title, with citations including catalog number, rental price, producer/vendor code,…

Aerospace Bibliography, Fourth Edition.

ERIC Educational Resources Information Center

National Aerospace Education Council, Washington, DC.

This annotated bibliography, intended for elementary and secondary school teachers, their pupils, and general adult readers contains grade level coded lists of books, reference works, periodicals, and teaching aids dealing with astronomy and space flight subjects. The reading material is listed alphabetically by author. The teaching aids in Part…

An introduction to QR Codes: linking libraries and mobile patrons.

PubMed

Hoy, Matthew B

2011-01-01

QR codes, or "Quick Response" codes, are two-dimensional barcodes that can be scanned by mobile smartphone cameras. These codes can be used to provide fast access to URLs, telephone numbers, and short passages of text. With the rapid adoption of smartphones, librarians are able to use QR codes to promote services and help library users find materials quickly and independently. This article will explain what QR codes are, discuss how they can be used in the library, and describe issues surrounding their use. A list of resources for generating and scanning QR codes is also provided.

Program/project management resource lists

NASA Technical Reports Server (NTRS)

1993-01-01

The Program/Project Management Collection at NASA Headquarters Library is part of a larger initiative by the Training and Development Division, Code FT, NASA Headquarters. The collection is being developed to support the Program/Project Management Initiative which includes the training of NASA managers. These PPM Resource Lists have proven to be a useful method of informing NASA employees nationwide about the subject coverage of the library collection. All resources included on the lists are available at or through NASA Headquarters Library. NASA employees at other Centers may request listed books through interlibrary loan, and listed articles by contacting me by phone, mail, or e-mail.

Software development infrastructure for the HYBRID modeling and simulation project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Epiney, Aaron S.; Kinoshita, Robert A.; Kim, Jong Suk

One of the goals of the HYBRID modeling and simulation project is to assess the economic viability of hybrid systems in a market that contains renewable energy sources like wind. The idea is that it is possible for the nuclear plant to sell non-electric energy cushions, which absorb (at least partially) the volatility introduced by the renewable energy sources. This system is currently modeled in the Modelica programming language. To assess the economics of the system, an optimization procedure is trying to find the minimal cost of electricity production. The RAVEN code is used as a driver for the wholemore » problem. It is assumed that at this stage, the HYBRID modeling and simulation framework can be classified as non-safety “research and development” software. The associated quality level is Quality Level 3 software. This imposes low requirements on quality control, testing and documentation. The quality level could change as the application development continues.Despite the low quality requirement level, a workflow for the HYBRID developers has been defined that include a coding standard and some documentation and testing requirements. The repository performs automated unit testing of contributed models. The automated testing is achieved via an open-source python script called BuildingsP from Lawrence Berkeley National Lab. BuildingsPy runs Modelica simulation tests using Dymola in an automated manner and generates and runs unit tests from Modelica scripts written by developers. In order to assure effective communication between the different national laboratories a biweekly videoconference has been set-up, where developers can report their progress and issues. In addition, periodic face-face meetings are organized intended to discuss high-level strategy decisions with management. A second means of communication is the developer email list. This is a list to which everybody can send emails that will be received by the collective of the developers and managers involved in the project. Thirdly, to exchange documents quickly, a SharePoint directory has been set-up. SharePoint allows teams and organizations to intelligently share, and collaborate on content from anywhere.« less

Telepharmacy and bar-code technology in an i.v. chemotherapy admixture area.

PubMed

O'Neal, Brian C; Worden, John C; Couldry, Rick J

2009-07-01

A program using telepharmacy and bar-code technology to increase the presence of the pharmacist at a critical risk point during chemotherapy preparation is described. Telepharmacy hardware and software were acquired, and an inspection camera was placed in a biological safety cabinet to allow the pharmacy technician to take digital photographs at various stages of the chemotherapy preparation process. Once the pharmacist checks the medication vials' agreement with the work label, the technician takes the product into the biological safety cabinet, where the appropriate patient is selected from the pending work list, a queue of patient orders sent from the pharmacy information system. The technician then scans the bar code on the vial. Assuming the bar code matches, the technician photographs the work label, vials, diluents and fluids to be used, and the syringe (before injecting the contents into the bag) along with the vial. The pharmacist views all images as a part of the final product-checking process. This process allows the pharmacist to verify that the correct quantity of medication was transferred from the primary source to a secondary container without being physically present at the time of transfer. Telepharmacy and bar coding provide a means to improve the accuracy of chemotherapy preparation by decreasing the likelihood of using the incorrect product or quantity of drug. The system facilitates the reading of small product labels and removes the need for a pharmacist to handle contaminated syringes and vials when checking the final product.

Joint source-channel coding for motion-compensated DCT-based SNR scalable video.

PubMed

Kondi, Lisimachos P; Ishtiaq, Faisal; Katsaggelos, Aggelos K

2002-01-01

In this paper, we develop an approach toward joint source-channel coding for motion-compensated DCT-based scalable video coding and transmission. A framework for the optimal selection of the source and channel coding rates over all scalable layers is presented such that the overall distortion is minimized. The algorithm utilizes universal rate distortion characteristics which are obtained experimentally and show the sensitivity of the source encoder and decoder to channel errors. The proposed algorithm allocates the available bit rate between scalable layers and, within each layer, between source and channel coding. We present the results of this rate allocation algorithm for video transmission over a wireless channel using the H.263 Version 2 signal-to-noise ratio (SNR) scalable codec for source coding and rate-compatible punctured convolutional (RCPC) codes for channel coding. We discuss the performance of the algorithm with respect to the channel conditions, coding methodologies, layer rates, and number of layers.

Encoded physics knowledge in checking codes for nuclear cross section libraries at Los Alamos

NASA Astrophysics Data System (ADS)

Parsons, D. Kent

2017-09-01

Checking procedures for processed nuclear data at Los Alamos are described. Both continuous energy and multi-group nuclear data are verified by locally developed checking codes which use basic physics knowledge and common-sense rules. A list of nuclear data problems which have been identified with help of these checking codes is also given.

Organizational Effectiveness Information System (OEIS) User’s Manual

DTIC Science & Technology

1986-09-01

SUBJECT CODES B-l C. LISTING OF VALID RESOURCE SYSTEM CODES C-l »TflerÄ*w»fi*%f*fc**v.nft; ^’.A/.V. A y.A/.AAA«•.*-A/. AAV ...the valid codes used la the Implementation and Design System. MACOM 01 COE 02 DARCOM 03 EUSA 04 FORSCOM 05 HSC 06 HQDA 07 INSCOM 08 MDW 09

77 FR 66601 - Electronic Tariff Filings; Notice of Change to eTariff Type of Filing Codes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-06

... Tariff Filings; Notice of Change to eTariff Type of Filing Codes Take notice that, effective November 18, 2012, the list of available eTariff Type of Filing Codes (TOFC) will be modified to include a new TOFC... Energy's regulations. Tariff records included in such filings will be automatically accepted to be...

User's manual for the BNW-I optimization code for dry-cooled power plants. Volume III. [PLCIRI

DOE Office of Scientific and Technical Information (OSTI.GOV)

Braun, D.J.; Daniel, D.J.; De Mier, W.V.

1977-01-01

This appendix to User's Manual for the BNW-1 Optimization Code for Dry-Cooled Power Plants provides a listing of the BNW-I optimization code for determining, for a particular size power plant, the optimum dry cooling tower design using a plastic tube cooling surface and circular tower arrangement of the tube bundles. (LCL)

Typographic coding in lists and bibliographies.

PubMed

Spencer, H; Reynolds, L; Coe, B

1974-09-01

A comparison was made of the effectiveness of ten systems of typographical/spatial coding suitable for use in the presentation of highly structured information such as bibliographic material. With one exception, which requires a bold typeface, the systems tested are all suitable for the preparation of copy on a standard typewriter or an upper and lowercase line printer. Sections of alphabetical author index were typed in each of the ten styles and subjects were asked to look up lists of entries in each style. The most effective system on balance was a two-unit left extension of the first line of each entry.

Architectural Terms for Educational Planners.

ERIC Educational Resources Information Center

1997

This booklet is designed to facilitate open, clear communication between educational facility planners and the architects hired to oversee building design and construction. It provides a list of architectural, electrical, plumbing, and topographical symbols; a glossary of architectural terms; and a list of public agencies and relevant codes and…

Braille Instruction and Writing Equipment: Reference Circular 86-3.

ERIC Educational Resources Information Center

Library of Congress, Washington, DC. National Library Service for the Blind and Physically Handicapped.

This reference circular lists selected braille instructional materials and braille writing equipment and supplies currently available for purchase. A total of eight braille code books, seven instruction manuals for braille transcribing, and 17 instructional manuals for braille reading are listed. Suggestions are presented about braille instruction…

Automated UMLS-Based Comparison of Medical Forms

PubMed Central

Dugas, Martin; Fritz, Fleur; Krumm, Rainer; Breil, Bernhard

2013-01-01

Medical forms are very heterogeneous: on a European scale there are thousands of data items in several hundred different systems. To enable data exchange for clinical care and research purposes there is a need to develop interoperable documentation systems with harmonized forms for data capture. A prerequisite in this harmonization process is comparison of forms. So far – to our knowledge – an automated method for comparison of medical forms is not available. A form contains a list of data items with corresponding medical concepts. An automatic comparison needs data types, item names and especially item with these unique concept codes from medical terminologies. The scope of the proposed method is a comparison of these items by comparing their concept codes (coded in UMLS). Each data item is represented by item name, concept code and value domain. Two items are called identical, if item name, concept code and value domain are the same. Two items are called matching, if only concept code and value domain are the same. Two items are called similar, if their concept codes are the same, but the value domains are different. Based on these definitions an open-source implementation for automated comparison of medical forms in ODM format with UMLS-based semantic annotations was developed. It is available as package compareODM from http://cran.r-project.org. To evaluate this method, it was applied to a set of 7 real medical forms with 285 data items from a large public ODM repository with forms for different medical purposes (research, quality management, routine care). Comparison results were visualized with grid images and dendrograms. Automated comparison of semantically annotated medical forms is feasible. Dendrograms allow a view on clustered similar forms. The approach is scalable for a large set of real medical forms. PMID:23861827

The ADVANCE Code of Conduct for collaborative vaccine studies.

PubMed

Kurz, Xavier; Bauchau, Vincent; Mahy, Patrick; Glismann, Steffen; van der Aa, Lieke Maria; Simondon, François

2017-04-04

Lessons learnt from the 2009 (H1N1) flu pandemic highlighted factors limiting the capacity to collect European data on vaccine exposure, safety and effectiveness, including lack of rapid access to available data sources or expertise, difficulties to establish efficient interactions between multiple parties, lack of confidence between private and public sectors, concerns about possible or actual conflicts of interest (or perceptions thereof) and inadequate funding mechanisms. The Innovative Medicines Initiative's Accelerated Development of VAccine benefit-risk Collaboration in Europe (ADVANCE) consortium was established to create an efficient and sustainable infrastructure for rapid and integrated monitoring of post-approval benefit-risk of vaccines, including a code of conduct and governance principles for collaborative studies. The development of the code of conduct was guided by three core and common values (best science, strengthening public health, transparency) and a review of existing guidance and relevant published articles. The ADVANCE Code of Conduct includes 45 recommendations in 10 topics (Scientific integrity, Scientific independence, Transparency, Conflicts of interest, Study protocol, Study report, Publication, Subject privacy, Sharing of study data, Research contract). Each topic includes a definition, a set of recommendations and a list of additional reading. The concept of the study team is introduced as a key component of the ADVANCE Code of Conduct with a core set of roles and responsibilities. It is hoped that adoption of the ADVANCE Code of Conduct by all partners involved in a study will facilitate and speed-up its initiation, design, conduct and reporting. Adoption of the ADVANCE Code of Conduct should be stated in the study protocol, study report and publications and journal editors are encouraged to use it as an indication that good principles of public health, science and transparency were followed throughout the study. Copyright © 2017. Published by Elsevier Ltd.

Automatic NEPHIS Coding of Descriptive Titles for Permuted Index Generation.

ERIC Educational Resources Information Center

Craven, Timothy C.

1982-01-01

Describes a system for the automatic coding of most descriptive titles which generates Nested Phrase Indexing System (NEPHIS) input strings of sufficient quality for permuted index production. A series of examples and an 11-item reference list accompany the text. (JL)

Reporting Codes and Fuel Pathways for the EPA Moderated Transaction System (EMTS)

EPA Pesticide Factsheets

Users should reference this document for a complete list of all reporting codes and all possible fuel pathways for Renewable Fuel Standard (RFS) and Fuels Averaging, Banking and Trading (ABT) users of the EPA Moderated Transaction System (EMTS).

Optimising the use of electronic health records to estimate the incidence of rheumatoid arthritis in primary care: what information is hidden in free text?

PubMed Central

2013-01-01

Background Primary care databases are a major source of data for epidemiological and health services research. However, most studies are based on coded information, ignoring information stored in free text. Using the early presentation of rheumatoid arthritis (RA) as an exemplar, our objective was to estimate the extent of data hidden within free text, using a keyword search. Methods We examined the electronic health records (EHRs) of 6,387 patients from the UK, aged 30 years and older, with a first coded diagnosis of RA between 2005 and 2008. We listed indicators for RA which were present in coded format and ran keyword searches for similar information held in free text. The frequency of indicator code groups and keywords from one year before to 14 days after RA diagnosis were compared, and temporal relationships examined. Results One or more keyword for RA was found in the free text in 29% of patients prior to the RA diagnostic code. Keywords for inflammatory arthritis diagnoses were present for 14% of patients whereas only 11% had a diagnostic code. Codes for synovitis were found in 3% of patients, but keywords were identified in an additional 17%. In 13% of patients there was evidence of a positive rheumatoid factor test in text only, uncoded. No gender differences were found. Keywords generally occurred close in time to the coded diagnosis of rheumatoid arthritis. They were often found under codes indicating letters and communications. Conclusions Potential cases may be missed or wrongly dated when coded data alone are used to identify patients with RA, as diagnostic suspicions are frequently confined to text. The use of EHRs to create disease registers or assess quality of care will be misleading if free text information is not taken into account. Methods to facilitate the automated processing of text need to be developed and implemented. PMID:23964710

A review of routinely collected data studies in urology: Methodological considerations, reporting quality, and future directions.

PubMed

Welk, Blayne; Kwong, Justin

2017-01-01

Studies using routinely collected data (RCD) are common in the urological literature; however, there are important considerations in the creation and review of RCD discoveries. A recent reporting guideline (REporting of studies Conducted using Observational Routinely-collected health Data, RECORD) was developed to improve the reporting of these studies. This narrative review examines important considerations for RCD studies. To assess the current level of reporting in the urological literature, we reviewed all the original research articles published in Journal of Urology and European Urology in 2014, and determined the proportion of the RECORD checklist items that were reported for RCD studies. There were 56 RCD studies identified among the 608 articles. When the RECORD items were considered applicable to the specific study, they were reported in 52.5% of cases. Studies most consistently (>80% of them) reported the names of the data sources, the study time frame, the extent to which the authors could access the database source, the patient selection, and discussed missing data. Few studies (<25%) discussed validation of key coding elements, details on data-linkage, data-cleaning, the impact of changing eligibility over time, or provided the complete list of coding elements used to define key study variables. Reporting factors specifically relevant in RCD studies may serve to increase the quality of these studies in the urological literature. With increased technological integration in healthcare and the proliferation of electronic medical records, RCD will continue to be an important source for urological research.

Infant Deaths Due To Herpes Simplex Virus, Congenital Syphilis, and HIV in New York City.

PubMed

Sampath, Amitha; Maduro, Gil; Schillinger, Julia A

2016-04-01

Neonatal infection with herpes simplex virus (HSV) is not a nationally reportable disease; there have been few population-based measures of HSV-related infant mortality. We describe infant death rates due to neonatal HSV as compared with congenital syphilis (CS) and HIV, 2 reportable, perinatally transmitted diseases, in New York City from 1981 to 2013. We identified neonatal HSV-, CS-, and HIV-related deaths using International Classification of Diseases (ICD) codes listed on certificates of death or stillbirth issued in New York City. Deaths were classified as HSV-related if certificates listed (1) any HSV ICD-9/ICD-10 codes for deaths ≤42 days of age, (2) any HSV ICD-9/ICD-10 codes and an ICD code for perinatal infection for deaths at 43 to 365 days of age, or (3) an ICD-10 code for congenital HSV. CS- and HIV-related deaths were those listing any ICD code for syphilis or HIV. There were 34 deaths due to neonatal HSV (0.82 deaths per 100 000 live births), 38 from CS (0.92 per 100 000), and 262 from HIV (6.33 per 100 000). There were no CS-related deaths after 1996, and only 1 HIV-related infant death after 2004. The neonatal HSV-related death rate during the most recent decade (2004-2013) was significantly higher than in previous years. The increasing neonatal HSV-related death rate may reflect increases in neonatal herpes incidence; an increasing number of pregnant women have never had HSV type 1 and are therefore at risk of acquiring infection during pregnancy and transmitting to their infant. Copyright © 2016 by the American Academy of Pediatrics.

[Electoral demography. The demographic dimension of a political process].

PubMed

Herrero, J M

1991-01-01

A complete and reliable knowledge of the potential voters is indispensable for holding elections in a democratic society. In 1990 a new Federal Code of Electoral Institutions and Procedures (COFIRE) was approved in Mexico. A new list of potential voters was to be created based on the 1990 census and without reference to the old list. The planning and implementation of the 1991 electoral rolls required great efficiency in order to complete the work in time for elections, while assuring its validity and legitimacy through a clear and participatory process in which all political parties played a permanent role. COFIRE designated July 1991 as the date for completion, allowing just 10 months for the entire process from planning to completion. The 1991 work represented a political process as much as a technical challenge. A working group from the political parties provided advice on all aspects of the work, from defining the social communications campaign to cartographic review and organization of field work. Although the list potential voters not intended for demographic purposes, its validity, coverage, and variety of information make it a rich source of sociodemographic information. An estimated 95% of individuals included in the 1990 census were included in the lists of prospective voters. Of these, 39,500,000 citizens, or 86% of the census population, actually registered as of the deadline on May 31. The final coverage by states varied from a low of 79.3% in Guerrero to a high of 91.0% in the Federal District.

TAM: a method for enrichment and depletion analysis of a microRNA category in a list of microRNAs.

PubMed

Lu, Ming; Shi, Bing; Wang, Juan; Cao, Qun; Cui, Qinghua

2010-08-09

MicroRNAs (miRNAs) are a class of important gene regulators. The number of identified miRNAs has been increasing dramatically in recent years. An emerging major challenge is the interpretation of the genome-scale miRNA datasets, including those derived from microarray and deep-sequencing. It is interesting and important to know the common rules or patterns behind a list of miRNAs, (i.e. the deregulated miRNAs resulted from an experiment of miRNA microarray or deep-sequencing). For the above purpose, this study presents a method and develops a tool (TAM) for annotations of meaningful human miRNAs categories. We first integrated miRNAs into various meaningful categories according to prior knowledge, such as miRNA family, miRNA cluster, miRNA function, miRNA associated diseases, and tissue specificity. Using TAM, given lists of miRNAs can be rapidly annotated and summarized according to the integrated miRNA categorical data. Moreover, given a list of miRNAs, TAM can be used to predict novel related miRNAs. Finally, we confirmed the usefulness and reliability of TAM by applying it to deregulated miRNAs in acute myocardial infarction (AMI) from two independent experiments. TAM can efficiently identify meaningful categories for given miRNAs. In addition, TAM can be used to identify novel miRNA biomarkers. TAM tool, source codes, and miRNA category data are freely available at http://cmbi.bjmu.edu.cn/tam.

Authorship Attribution of Source Code

ERIC Educational Resources Information Center

Tennyson, Matthew F.

2013-01-01

Authorship attribution of source code is the task of deciding who wrote a program, given its source code. Applications include software forensics, plagiarism detection, and determining software ownership. A number of methods for the authorship attribution of source code have been presented in the past. A review of those existing methods is…

Differences in reported sepsis incidence according to study design: a literature review.

PubMed

Mariansdatter, Saga Elise; Eiset, Andreas Halgreen; Søgaard, Kirstine Kobberøe; Christiansen, Christian Fynbo

2016-10-12

Sepsis and severe sepsis are common conditions in hospital settings, and are associated with high rates of morbidity and mortality, but reported incidences vary considerably. In this literature review, we describe the variation in reported population-based incidences of sepsis and severe sepsis. We also examine methodological and demographic differences between studies that may explain this variation. We carried out a literature review searching three major databases and reference lists of relevant articles, to identify all original studies reporting the incidence of sepsis or severe sepsis in the general population. Two authors independently assessed all articles, and the final decision to exclude an article was reached by consensus. We extracted data according to predetermined variables, including study country, sepsis definition, and data source. We then calculated descriptive statistics for the reported incidences of sepsis and severe sepsis. The studies were classified according to the method used to identify cases of sepsis or severe sepsis: chart-based (i.e. review of patient charts) or code-based (i.e. predetermined International Classification of Diseases [ICD] codes). Among 482 articles initially screened, we identified 23 primary publications reporting incidence of sepsis and/or severe sepsis in the general population. The reported incidences ranged from 74 to 1180 per 100,000 person-years and 3 to 1074 per 100,000 person-years for sepsis and severe sepsis, respectively. Most chart-based studies used the Bone criteria (or a modification hereof) and Protein C Worldwide Evaluation in Severe Sepsis (PROWESS) study criteria to identify cases of sepsis and severe sepsis. Most code-based studies used ICD-9 codes, but the number of codes used ranged from 1 to more than 1200. We found that the incidence varied according to how sepsis was identified (chart-based vs. code-based), calendar year, data source, and world region. The reported incidences of sepsis and severe sepsis in the general population varied greatly between studies. Such differences may be attributable to differences in the methods used to collect the data, the study period, or the world region where the study was undertaken. This finding highlights the importance of standardised definitions and acquisition of data regarding sepsis and severe sepsis.

76 FR 55882 - Procurement List; Addition

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

... Americans to work, earn income and be productive members of society. The AbilityOne Program, which the... Administration, Fort Worth, TX. Coverage: A-List for the Total Government Requirement as aggregated by the... Information Management). [FR Doc. 2011-23107 Filed 9-8-11; 8:45 am] BILLING CODE 6353-01-P ...

77 FR 43711 - The Commerce Control List

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

... DEPARTMENT OF COMMERCE Bureau of Industry and Security 15 CFR Part 774 The Commerce Control List CFR Correction In Title 15 of the Code of Federal Regulations, Parts 300 to 799, revised as of January... II, in 5E002, after ``Related Controls'' and before ``Items'', add ``Related Definitions: N/A''. [FR...

Software Engineering Laboratory (SEL) compendium of tools, revision 1

NASA Technical Reports Server (NTRS)

1982-01-01

A set of programs used to aid software product development is listed. Known as software tools, such programs include requirements analyzers, design languages, precompilers, code auditors, code analyzers, and software librarians. Abstracts, resource requirements, documentation, processing summaries, and availability are indicated for most tools.

77 FR 47539 - Paraquat Dichloride; Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-09

...). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS code 32532). This listing is not... Federal Food, Drug, and Cosmetic Act (FFDCA). DATES: This regulation is effective August 9, 2012...? You may be potentially affected by this action if you are an agricultural producer, food manufacturer...

A Study on Architecture of Malicious Code Blocking Scheme with White List in Smartphone Environment

NASA Astrophysics Data System (ADS)

Lee, Kijeong; Tolentino, Randy S.; Park, Gil-Cheol; Kim, Yong-Tae

Recently, the interest and demands for mobile communications are growing so fast because of the increasing prevalence of smartphones around the world. In addition, the existing feature phones were replaced by smartphones and it has widely improved while using the explosive growth of Internet users using smartphones, e-commerce enabled Internet banking transactions and the importance of protecting personal information. Therefore, the development of smartphones antivirus products was developed and launched in order to prevent malicious code or virus infection. In this paper, we proposed a new scheme to protect the smartphone from malicious codes and malicious applications that are element of security threats in mobile environment and to prevent information leakage from malicious code infection. The proposed scheme is based on the white list smartphone application which only allows installing authorized applications and to prevent the installation of malicious and untrusted mobile applications which can possibly infect the applications and programs of smartphones.

Schroedinger’s code: Source code availability and transparency in astrophysics

NASA Astrophysics Data System (ADS)

Ryan, PW; Allen, Alice; Teuben, Peter

2018-01-01

Astronomers use software for their research, but how many of the codes they use are available as source code? We examined a sample of 166 papers from 2015 for clearly identified software use, then searched for source code for the software packages mentioned in these research papers. We categorized the software to indicate whether source code is available for download and whether there are restrictions to accessing it, and if source code was not available, whether some other form of the software, such as a binary, was. Over 40% of the source code for the software used in our sample was not available for download.As URLs have often been used as proxy citations for software, we also extracted URLs from one journal’s 2015 research articles, removed those from certain long-term, reliable domains, and tested the remainder to determine what percentage of these URLs were still accessible in September and October, 2017.

50 CFR 424.13 - Sources of information and relevant data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS SUBCHAPTER A LISTING ENDANGERED AND THREATENED SPECIES AND DESIGNATING CRITICAL HABITAT Revision of the Lists § 424.13 Sources of information and relevant data. When considering any revision of the lists, the Secretary shall...

50 CFR 424.13 - Sources of information and relevant data.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS SUBCHAPTER A LISTING ENDANGERED AND THREATENED SPECIES AND DESIGNATING CRITICAL HABITAT Revision of the Lists § 424.13 Sources of information and relevant data. When considering any revision of the lists, the Secretary shall...

The Five 'R's' for Developing Trusted Software Frameworks to increase confidence in, and maximise reuse of, Open Source Software.

NASA Astrophysics Data System (ADS)

Fraser, Ryan; Gross, Lutz; Wyborn, Lesley; Evans, Ben; Klump, Jens

2015-04-01

Recent investments in HPC, cloud and Petascale data stores, have dramatically increased the scale and resolution that earth science challenges can now be tackled. These new infrastructures are highly parallelised and to fully utilise them and access the large volumes of earth science data now available, a new approach to software stack engineering needs to be developed. The size, complexity and cost of the new infrastructures mean any software deployed has to be reliable, trusted and reusable. Increasingly software is available via open source repositories, but these usually only enable code to be discovered and downloaded. As a user it is hard for a scientist to judge the suitability and quality of individual codes: rarely is there information on how and where codes can be run, what the critical dependencies are, and in particular, on the version requirements and licensing of the underlying software stack. A trusted software framework is proposed to enable reliable software to be discovered, accessed and then deployed on multiple hardware environments. More specifically, this framework will enable those who generate the software, and those who fund the development of software, to gain credit for the effort, IP, time and dollars spent, and facilitate quantification of the impact of individual codes. For scientific users, the framework delivers reviewed and benchmarked scientific software with mechanisms to reproduce results. The trusted framework will have five separate, but connected components: Register, Review, Reference, Run, and Repeat. 1) The Register component will facilitate discovery of relevant software from multiple open source code repositories. The registration process of the code should include information about licensing, hardware environments it can be run on, define appropriate validation (testing) procedures and list the critical dependencies. 2) The Review component is targeting on the verification of the software typically against a set of benchmark cases. This will be achieved by linking the code in the software framework to peer review forums such as Mozilla Science or appropriate Journals (e.g. Geoscientific Model Development Journal) to assist users to know which codes to trust. 3) Referencing will be accomplished by linking the Software Framework to groups such as Figshare or ImpactStory that help disseminate and measure the impact of scientific research, including program code. 4) The Run component will draw on information supplied in the registration process, benchmark cases described in the review and relevant information to instantiate the scientific code on the selected environment. 5) The Repeat component will tap into existing Provenance Workflow engines that will automatically capture information that relate to a particular run of that software, including identification of all input and output artefacts, and all elements and transactions within that workflow. The proposed trusted software framework will enable users to rapidly discover and access reliable code, reduce the time to deploy it and greatly facilitate sharing, reuse and reinstallation of code. Properly designed it could enable an ability to scale out to massively parallel systems and be accessed nationally/ internationally for multiple use cases, including Supercomputer centres, cloud facilities, and local computers.

75 FR 77681 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing Relating to Listing and Trading...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-13

...-adviser are subject to the provisions of Rule 204A-1 under the Advisers Act relating to codes of ethics. This Rule requires investment advisers to adopt a code of ethics that reflects the fiduciary nature of... specifically requires the adoption of a code of ethics by an investment advisor to include, at a minimum: (i...

A method and knowledge base for automated inference of patient problems from structured data in an electronic medical record

PubMed Central

Pang, Justine; Feblowitz, Joshua C; Maloney, Francine L; Wilcox, Allison R; Ramelson, Harley Z; Schneider, Louise I; Bates, David W

2011-01-01

Background Accurate knowledge of a patient's medical problems is critical for clinical decision making, quality measurement, research, billing and clinical decision support. Common structured sources of problem information include the patient problem list and billing data; however, these sources are often inaccurate or incomplete. Objective To develop and validate methods of automatically inferring patient problems from clinical and billing data, and to provide a knowledge base for inferring problems. Study design and methods We identified 17 target conditions and designed and validated a set of rules for identifying patient problems based on medications, laboratory results, billing codes, and vital signs. A panel of physicians provided input on a preliminary set of rules. Based on this input, we tested candidate rules on a sample of 100 000 patient records to assess their performance compared to gold standard manual chart review. The physician panel selected a final rule for each condition, which was validated on an independent sample of 100 000 records to assess its accuracy. Results Seventeen rules were developed for inferring patient problems. Analysis using a validation set of 100 000 randomly selected patients showed high sensitivity (range: 62.8–100.0%) and positive predictive value (range: 79.8–99.6%) for most rules. Overall, the inference rules performed better than using either the problem list or billing data alone. Conclusion We developed and validated a set of rules for inferring patient problems. These rules have a variety of applications, including clinical decision support, care improvement, augmentation of the problem list, and identification of patients for research cohorts. PMID:21613643

Prediction of plant lncRNA by ensemble machine learning classifiers.

PubMed

Simopoulos, Caitlin M A; Weretilnyk, Elizabeth A; Golding, G Brian

2018-05-02

In plants, long non-protein coding RNAs are believed to have essential roles in development and stress responses. However, relative to advances on discerning biological roles for long non-protein coding RNAs in animal systems, this RNA class in plants is largely understudied. With comparatively few validated plant long non-coding RNAs, research on this potentially critical class of RNA is hindered by a lack of appropriate prediction tools and databases. Supervised learning models trained on data sets of mostly non-validated, non-coding transcripts have been previously used to identify this enigmatic RNA class with applications largely focused on animal systems. Our approach uses a training set comprised only of empirically validated long non-protein coding RNAs from plant, animal, and viral sources to predict and rank candidate long non-protein coding gene products for future functional validation. Individual stochastic gradient boosting and random forest classifiers trained on only empirically validated long non-protein coding RNAs were constructed. In order to use the strengths of multiple classifiers, we combined multiple models into a single stacking meta-learner. This ensemble approach benefits from the diversity of several learners to effectively identify putative plant long non-coding RNAs from transcript sequence features. When the predicted genes identified by the ensemble classifier were compared to those listed in GreeNC, an established plant long non-coding RNA database, overlap for predicted genes from Arabidopsis thaliana, Oryza sativa and Eutrema salsugineum ranged from 51 to 83% with the highest agreement in Eutrema salsugineum. Most of the highest ranking predictions from Arabidopsis thaliana were annotated as potential natural antisense genes, pseudogenes, transposable elements, or simply computationally predicted hypothetical protein. Due to the nature of this tool, the model can be updated as new long non-protein coding transcripts are identified and functionally verified. This ensemble classifier is an accurate tool that can be used to rank long non-protein coding RNA predictions for use in conjunction with gene expression studies. Selection of plant transcripts with a high potential for regulatory roles as long non-protein coding RNAs will advance research in the elucidation of long non-protein coding RNA function.

A Selected List of Business and Economic Sources. Bibliographic Series No. 27.

ERIC Educational Resources Information Center

Ahrens, Joan

Selected information sources in business and economics held by the Arkansas University library are listed. Items are organized by material type, including indexes, directories, atlases, bibliographies, dictionaries, encyclopedias, guides, handbooks, and newspapers. Separate listings of Moody's and Standard and Poor's looseleaf publications are…

Thermoelectric pump performance analysis computer code

NASA Technical Reports Server (NTRS)

Johnson, J. L.

1973-01-01

A computer program is presented that was used to analyze and design dual-throat electromagnetic dc conduction pumps for the 5-kwe ZrH reactor thermoelectric system. In addition to a listing of the code and corresponding identification of symbols, the bases for this analytical model are provided.

Author Correction: Recognition of RNA N6-methyladenosine by IGF2BP proteins enhances mRNA stability and translation.

PubMed

Huang, Huilin; Weng, Hengyou; Sun, Wenju; Qin, Xi; Shi, Hailing; Wu, Huizhe; Zhao, Boxuan Simen; Mesquita, Ana; Liu, Chang; Yuan, Celvie L; Hu, Yueh-Chiang; Hüttelmaier, Stefan; Skibbe, Jennifer R; Su, Rui; Deng, Xiaolan; Dong, Lei; Sun, Miao; Li, Chenying; Nachtergaele, Sigrid; Wang, Yungui; Hu, Chao; Ferchen, Kyle; Greis, Kenneth D; Jiang, Xi; Wei, Minjie; Qu, Lianghu; Guan, Jun-Lin; He, Chuan; Yang, Jianhua; Chen, Jianjun

2018-06-07

In the version of this Article originally published, the authors incorrectly listed an accession code as GES90642. The correct code is GSE90642 . This has now been amended in all online versions of the Article.

Measuring Diagnoses: ICD Code Accuracy

PubMed Central

O'Malley, Kimberly J; Cook, Karon F; Price, Matt D; Wildes, Kimberly Raiford; Hurdle, John F; Ashton, Carol M

2005-01-01

Objective To examine potential sources of errors at each step of the described inpatient International Classification of Diseases (ICD) coding process. Data Sources/Study Setting The use of disease codes from the ICD has expanded from classifying morbidity and mortality information for statistical purposes to diverse sets of applications in research, health care policy, and health care finance. By describing a brief history of ICD coding, detailing the process for assigning codes, identifying where errors can be introduced into the process, and reviewing methods for examining code accuracy, we help code users more systematically evaluate code accuracy for their particular applications. Study Design/Methods We summarize the inpatient ICD diagnostic coding process from patient admission to diagnostic code assignment. We examine potential sources of errors at each step and offer code users a tool for systematically evaluating code accuracy. Principle Findings Main error sources along the “patient trajectory” include amount and quality of information at admission, communication among patients and providers, the clinician's knowledge and experience with the illness, and the clinician's attention to detail. Main error sources along the “paper trail” include variance in the electronic and written records, coder training and experience, facility quality-control efforts, and unintentional and intentional coder errors, such as misspecification, unbundling, and upcoding. Conclusions By clearly specifying the code assignment process and heightening their awareness of potential error sources, code users can better evaluate the applicability and limitations of codes for their particular situations. ICD codes can then be used in the most appropriate ways. PMID:16178999

Public Administration: A Bibliography of Selected Reference Sources.

ERIC Educational Resources Information Center

Brustman, Mary Jane

This guide presents an annotated list of selected reference sources in public administration. All of the sources listed are found at the Graduate Library for Public Affairs and Policy (GLPP) located at the State University of New York, Albany. Detailed, exhaustive guides in literature, research, indexes, abstracts, statistical sources, government…

GUMAP: A GUPIXWIN-compatible code for extracting regional spectra from nuclear microbeam list mode files

NASA Astrophysics Data System (ADS)

Russell, John L.; Campbell, John L.; Boyd, Nicholas I.; Dias, Johnny F.

2018-02-01

The newly developed GUMAP software creates element maps from OMDAQ list mode files, displays these maps individually or collectively, and facilitates on-screen definitions of specified regions from which a PIXE spectrum can be built. These include a free-hand region defined by moving the cursor. The regional charge is entered automatically into the spectrum file in a new GUPIXWIN-compatible format, enabling a GUPIXWIN analysis of the spectrum. The code defaults to the OMDAQ dead time treatment but also facilitates two other methods for dead time correction in sample regions with count rates different from the average.

Program/Project Management Resources: A collection of 50 bibliographies focusing on continual improvement, reinventing government, and successful project management

NASA Technical Reports Server (NTRS)

Michaels, Jeffrey

1994-01-01

These Program/Project Management Resource Lists were originally written for the NASA project management community. Their purpose was to promote the use of the NASA Headquarters Library Program/Project Management Collection funded by NASA Headquarters Code FT, Training & Development Division, by offering introductions to the management topics studied by today's managers. Lists were also written at the request of NASA Headquarters Code T, Office of Continual improvements, and at the request of NASA members of the National Performance Review. This is the second edition of the compilation of these bibliographies; the first edition was printed in March 1994.

USGS launches online database: Lichens in National Parks

USGS Publications Warehouse

Bennett, Jim

2005-01-01

If you are interested in lichens and National Parks, now you can query a lichen database that combines these two elements. Using pull-down menus you can: search by park, specifying either species list or the references used for that area; search by species (a report will show the parks in which species are found); and search by reference codes, which are available from the first query. The reference code search allows you to obtain the complete citation for each lichen species listed in a National Park.The result pages from these queries can be printed directly from the web browser, or can be copied and pasted into a word processor.

Curriculum Materials for "Distributive Education." Annotated Listing of Materials Available from Public Education Agencies.

ERIC Educational Resources Information Center

Bureau of Adult, Vocational, and Technical Education (DHEW/OE), Washington, DC.

This annotated listing of curriculum materials for Distributive Education provides planners, administrators, vocational educators, and others with information as to available curriculum materials developed by the various States. The materials are identified with the instructional titles and codes from the classification system of the Office of…

Job Grading System for Trades and Labor Occupations. Part II.

ERIC Educational Resources Information Center

Civil Service Commission, Washington, DC. Bureau of Policies and Standards.

Three new standards (telephone mechanic, electroplater, and animal caretaker) for grading jobs under the Federal Wage System are cited. There is an alphabetical listing by job for published job grading standards, an occupational code-structure index for published grading standards, and a list of 61 jobs by published job grading standard with…

141. ARAIII Equipment location plan. Includes list of equipment and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

141. ARA-III Equipment location plan. Includes list of equipment and location in reactor, control, and other buildings. Aerojet-general 880-area/GCRE-101-U-1. Date: February 1958. Ineel index code no. 063-0101-65-013-192508. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

Curriculum Materials for "Trade and Industrial Occupations." Annotated Listing of Materials Available from Public Education Agencies.

ERIC Educational Resources Information Center

Bureau of Adult, Vocational, and Technical Education (DHEW/OE), Washington, DC.

This annotated listing of curriculum materials for Trade and Industrial Occupations provides planners, administrators, vocational educators, and others with information as to available curriculum materials developed by the various States. The materials are identified with the instructional titles and codes from the classification system of the…

MINIMUM CHECK LIST FOR MECHANICAL PLANS AND SPECIFICATIONS.

ERIC Educational Resources Information Center

PIERCE, J.L.

THIS BULLETIN HAS BEEN PREPARED FOR USE AS A MINIMUM CHECK LIST IN THE DEVELOPMENT AND REVIEW OF MECHANICAL AND ELECTRICAL PLANS AND SPECIFICATIONS BY ENGINEERS, ARCHITECTS, AND SUPERINTENDENTS IN PLANNING PUBLIC SCHOOL FACILITIES. THREE LEVELS OF GUIDELINES ARE MENTIONED--(1) MANDATORY BECAUSE OF LAW, CODE, OR REGULATION, (2) RECOMMENDED AS MOST…

Curriculum Materials for "Health Occupations Education." Annotated Listing of Materials Available from Public Education Agencies

ERIC Educational Resources Information Center

Bureau of Adult, Vocational, and Technical Education (DHEW/OE), Washington, DC.

This annotated listing of curriculum materials for Health Occupations Education provides planners, administrators, vocational educators, and others with information as to available curriculum materials developed by the various States. The materials are identified with the instructional titles and codes from the classification system of the Office…

76 FR 79054 - The Commerce Control List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-21

... DEPARTMENT OF COMMERCE Bureau of Industry and Security 15 CFR Part 774 The Commerce Control List CFR Correction 0 In Title 15 of the Code of Federal Regulations, Parts 300 to 799, revised as of... entry in the table under Reasons for control for NS Column 1 and adding an entry following the remaining...

Conservation Seeds Activities Book. An Early Childhood Conservation Education Program.

ERIC Educational Resources Information Center

Griffin, Sherri

This activities book is used with an early childhood conservation education program. The activities are presented in four color-coded sections, each section representing one of the four seasons. Each activity includes a statement of purpose, list of materials needed, instructional strategies, and a list of supplementary activities. In addition to…

Unit-Credit Titles under Program Headings, Directory. Technology Education: Vocational Industrial, Industrial Arts, Home Economics.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg. Curriculum Services Branch.

This directory lists the unit-credit titles of the technology education courses offered in Manitoba, along with their corresponding department codes and course numbers. Sections A through C list the unit-credit titles of the following vocational-industrial clusters: heavy industrial (agriculture, auto body repair, building construction, building…

2015 Ohio Remediation Report

ERIC Educational Resources Information Center

Ohio Department of Higher Education, 2015

2015-01-01

In fulfillment of Ohio Revised Code 3333.041 (A) (1), the Chancellor of the Department of Higher Education has published a listing by school district of the number of the 2014 high school graduates who subsequently attended a state institution of higher education in academic year 2014-2015. The listing provides the percentage of each district's…

Electronics Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile covers the occupation of electronics technician. Section 1 provides the occupation definition. Section 2 lists development committee members. Section 3 provides the leveling codes--abbreviations for grade level, (by the end of grade 12, by the end of associate degree), academic codes (communications, math, or…

40 CFR 262.87 - Reporting and recordkeeping.

Code of Federal Regulations, 2012 CFR

2012-07-01

... movements subject to this subpart, persons (e.g., exporters, recognized traders) who meet the definition of...(s) and applicable waste code(s) from the appropriate OECD waste list incorporated by reference in... imprisonment. (b) Exception reports. Any person who meets the definition of primary exporter in § 262.51 or who...

40 CFR 262.87 - Reporting and recordkeeping.

Code of Federal Regulations, 2011 CFR

2011-07-01

... movements subject to this subpart, persons (e.g., exporters, recognized traders) who meet the definition of...(s) and applicable waste code(s) from the appropriate OECD waste list incorporated by reference in... imprisonment. (b) Exception reports. Any person who meets the definition of primary exporter in § 262.51 or who...

40 CFR 262.87 - Reporting and recordkeeping.

Code of Federal Regulations, 2013 CFR

2013-07-01

... movements subject to this subpart, persons (e.g., exporters, recognized traders) who meet the definition of...(s) and applicable waste code(s) from the appropriate OECD waste list incorporated by reference in... imprisonment. (b) Exception reports. Any person who meets the definition of primary exporter in § 262.51 or who...

40 CFR 262.87 - Reporting and recordkeeping.

Code of Federal Regulations, 2014 CFR

2014-07-01

... movements subject to this subpart, persons (e.g., exporters, recognized traders) who meet the definition of...(s) and applicable waste code(s) from the appropriate OECD waste list incorporated by reference in... imprisonment. (b) Exception reports. Any person who meets the definition of primary exporter in § 262.51 or who...

Analysis and calculation of macrosegregation in a casting ingot. MPS solidification model. Volume 2: Software documentation

NASA Technical Reports Server (NTRS)

Maples, A. L.

1980-01-01

The software developed for the solidification model is presented. A link between the calculations and the FORTRAN code is provided, primarily in the form of global flow diagrams and data structures. A complete listing of the solidification code is given.

77 FR 59629 - Statutorily Mandated Designation of Difficult Development Areas for 2013

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-28

... Economist, Economic Development and Public Finance Division, Office of Policy Development and Research... evaluative list of metropolitan zip codes that would be designated Small Area DDAs using this methodology and... Research. [FR Doc. 2012-23900 Filed 9-27-12; 8:45 am] BILLING CODE 4210-67-P ...

75 FR 8246 - Approval and Promulgation of Air Quality Implementation Plans; Indiana; Volatile Organic Compound...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

...)(2).) List of Subjects in 40 CFR Part 52 Environmental protection, Air pollution control...) Incorporation by reference. (A) Indiana Administrative Code Title 326: Air Pollution Control Board, Article 8..., 2009 (DIN: 20091202-IR-326090220FRA). (B) Indiana Administrative Code Title 326: Air Pollution Control...

78 FR 23558 - Pesticide Products; Registration Applications for New Active Ingredients

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-19

... 20460- 0001. As part of the mailing address, include the contact person's name, division, and mail code.... The following list of North American Industrial Classification System (NAICS) codes is not intended to... decision by the Agency on these applications. For actions being evaluated under the Agency's public...

Student Disciplinary Issues: A Legal Compendium. Second Edition

ERIC Educational Resources Information Center

Brown, Valerie L., Ed.

This compendium provides an overview of selected codes of student conduct, a selection of annotated legal decisions and important law review articles, and various National Association of College and University Attorney (NACUA) outlines on the issue of student discipline in both academic and nonacademic contexts. Part 1 lists nonacademic codes of…

Selected DOE headquarters publications

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1979-04-01

This publication provides listings of (mainly policy and programmatic) publications which have been issued by headquarters organizations of the Department of Energy; assigned a DOE/XXX- type report number code, where XXX is the 1- to 4-letter code for the issuing headquarters organization; received by the Energy Library; and made available to the public.

Performance Analysis of IEEE 802.11g TCM Waveforms Transmitted over a Channel with Pulse-Noise Interference

DTIC Science & Technology

2007-06-01

17 Table 2. Best (maximum free distance) rate r=2/3 punctured convolutional code ...Hamming distance between all pairs of non-zero paths. Table 2 lists the best rate r=2/3, punctured convolutional code information weight structure dB...Table 2. Best (maximum free distance) rate r=2/3 punctured convolutional code information weight structure. (From: [12]). K freed freeB

Operational rate-distortion performance for joint source and channel coding of images.

PubMed

Ruf, M J; Modestino, J W

1999-01-01

This paper describes a methodology for evaluating the operational rate-distortion behavior of combined source and channel coding schemes with particular application to images. In particular, we demonstrate use of the operational rate-distortion function to obtain the optimum tradeoff between source coding accuracy and channel error protection under the constraint of a fixed transmission bandwidth for the investigated transmission schemes. Furthermore, we develop information-theoretic bounds on performance for specific source and channel coding systems and demonstrate that our combined source-channel coding methodology applied to different schemes results in operational rate-distortion performance which closely approach these theoretical limits. We concentrate specifically on a wavelet-based subband source coding scheme and the use of binary rate-compatible punctured convolutional (RCPC) codes for transmission over the additive white Gaussian noise (AWGN) channel. Explicit results for real-world images demonstrate the efficacy of this approach.

40 CFR 461.44 - Pretreatment standards for existing sources (PSES).

Code of Federal Regulations, 2012 CFR

2012-07-01

...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) BATTERY MANUFACTURING POINT SOURCE CATEGORY Leclanche... for existing sources listed below: (1) Subpart D—Foliar Battery Miscellaneous Wash—PSES. Pollutant or... battery manufacturing operation other than those battery manufacturing operations listed above. [49 FR...

40 CFR 461.44 - Pretreatment standards for existing sources (PSES).

Code of Federal Regulations, 2013 CFR

2013-07-01

...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) BATTERY MANUFACTURING POINT SOURCE CATEGORY Leclanche... for existing sources listed below: (1) Subpart D—Foliar Battery Miscellaneous Wash—PSES. Pollutant or... battery manufacturing operation other than those battery manufacturing operations listed above. [49 FR...

40 CFR 461.44 - Pretreatment standards for existing sources (PSES).

Code of Federal Regulations, 2014 CFR

2014-07-01

...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) BATTERY MANUFACTURING POINT SOURCE CATEGORY Leclanche... for existing sources listed below: (1) Subpart D—Foliar Battery Miscellaneous Wash—PSES. Pollutant or... battery manufacturing operation other than those battery manufacturing operations listed above. [49 FR...

Developing a database management system to support birth defects surveillance in Florida.

PubMed

Salemi, Jason L; Hauser, Kimberlea W; Tanner, Jean Paul; Sampat, Diana; Correia, Jane A; Watkins, Sharon M; Kirby, Russell S

2010-01-01

The value of any public health surveillance program is derived from the ways in which data are managed and used to improve the public's health. Although birth defects surveillance programs vary in their case volume, budgets, staff, and objectives, the capacity to operate efficiently and maximize resources remains critical to long-term survival. The development of a fully-integrated relational database management system (DBMS) can enrich a surveillance program's data and improve efficiency. To build upon the Florida Birth Defects Registry--a statewide registry relying solely on linkage of administrative datasets and unconfirmed diagnosis codes-the Florida Department of Health provided funding to the University of South Florida to develop and pilot an enhanced surveillance system in targeted areas with a more comprehensive approach to case identification and diagnosis confirmation. To manage operational and administrative complexities, a DBMS was developed, capable of managing transmission of project data from multiple sources, tracking abstractor time during record reviews, offering tools for defect coding and case classification, and providing reports to DBMS users. Since its inception, the DBMS has been used as part of our surveillance projects to guide the receipt of over 200 case lists and review of 12,924 fetuses and infants (with associated maternal records) suspected of having selected birth defects in over 90 birthing and transfer facilities in Florida. The DBMS has provided both anticipated and unexpected benefits. Automation of the processes for managing incoming case lists has reduced clerical workload considerably, while improving accuracy of working lists for field abstraction. Data quality has improved through more effective use of internal edits and comparisons with values for other data elements, while simultaneously increasing abstractor efficiency in completion of case abstraction. We anticipate continual enhancement to the DBMS in the future. While we have focused on enhancing the capacity of our DBMS for birth defects surveillance, many of the tools and approaches we have developed translate directly to other public health and clinical registries.

RATFOR user's guide version 2.0

NASA Technical Reports Server (NTRS)

Helmle, L. C.

1985-01-01

This document is a user's guide for RATFOR at Ames Research Center. The main part of the document is a general description of RATFOR, and the appendix is devoted to a machine specific implementation for the Cray X-MP. The general stylistic features of RATFOR are discussed, including the block structure, keywords, source code, format, and the notion of tokens. There is a section on the basic control structures (IF-ELSE, ELSE IF, WHILE, FOR, DO, REPEAT-UNTIL, BREAK, NEXT), and there is a section on the statements that extend FORTRAN's capabilities (DEFINE, MACRO, INCLUDE, STRING). THE appendix discusses everything needed to compile and run a basic job, the preprocessor options, the supported character sets, the generated listings, fatal errors, and program limitations and the differences from standard FORTRAN.

Aero/fluids database system

NASA Technical Reports Server (NTRS)

Reardon, John E.; Violett, Duane L., Jr.

1991-01-01

The AFAS Database System was developed to provide the basic structure of a comprehensive database system for the Marshall Space Flight Center (MSFC) Structures and Dynamics Laboratory Aerophysics Division. The system is intended to handle all of the Aerophysics Division Test Facilities as well as data from other sources. The system was written for the DEC VAX family of computers in FORTRAN-77 and utilizes the VMS indexed file system and screen management routines. Various aspects of the system are covered, including a description of the user interface, lists of all code structure elements, descriptions of the file structures, a description of the security system operation, a detailed description of the data retrieval tasks, a description of the session log, and a description of the archival system.

Continuation of research into language concepts for the mission support environment: Source code

NASA Technical Reports Server (NTRS)

Barton, Timothy J.; Ratner, Jeremiah M.

1991-01-01

Research into language concepts for the Mission Control Center is presented. A computer code for source codes is presented. The file contains the routines which allow source code files to be created and compiled. The build process assumes that all elements and the COMP exist in the current directory. The build process places as much code generation as possible on the preprocessor as possible. A summary is given of the source files as used and/or manipulated by the build routine.

Marketing: A Bibliography of Marketing Reference Sources. The University of Rhode Island University Library.

ERIC Educational Resources Information Center

Masten, Lisa

This annotated bibliography provides a selected list of marketing reference sources for undergraduate and graduate business students interested in marketing and related topics. All sources listed are available in the Reference Department at the University Library at the University of Rhode Island Kingston campus. Most sources, with the exception…

[Coding Causes of Death with IRIS Software. Impact in Navarre Mortality Statistic].

PubMed

Floristán Floristán, Yugo; Delfrade Osinaga, Josu; Carrillo Prieto, Jesus; Aguirre Perez, Jesus; Moreno-Iribas, Conchi

2016-08-02

There are few studies that analyze changes in mortality statistics derived from the use of IRIS software, an automatic system for coding multiple causes of death and for the selection of the underlying cause of death, compared to manual coding. This study evaluated the impact of the use of IRIS in the Navarre mortality statistic. We proceeded to double coding 5,060 death certificates corresponding to residents in Navarra in 2014. We calculated coincidence between the two encodings for ICD10 chapters and for the list of causes of the Spanish National Statistics Institute (INE-102) and we estimated the change on mortality rates. IRIS automatically coded 90% of death certificates. The coincidence to 4 characters and in the same chapter of the CIE10 was 79.1% and 92.0%, respectively. Furthermore, coincidence with the short INE-102 list was 88.3%. Higher matches were found in death certificate of people under 65 years. In comparison with manual coding there was an increase in deaths from endocrine diseases (31%), mental disorders (19%) and disease of nervous system (9%), while a decrease of genitourinary system diseases was observed (21%). The coincidence at level of ICD10 chapters coding by IRIS in comparison to manual coding was 9 out of 10 deaths, similar to what is observed in other studies. The implementation of IRIS has led to increased of endocrine diseases, especially diabetes and hyperlipidaemia, and mental disorders, especially dementias.

NSSDC data listing

NASA Technical Reports Server (NTRS)

1982-01-01

The first part of this listing, Satellite Data, is in an abbreviated form compared to the data catalogs published by NSSDC. It is organized by NSSDC spacecraft common name. The launch date and NSSDC ID are printed for each spacecraft. The experiments are listed alphabetically by the principal investigator's or team leader's last name following the spacecraft name. The experiment name and NSSDC ID are printed for each experiment. The data sets are listed by NSSDC ID following the experiment name. The data set name, data form code, quantity of data, and the time span of the data as verified by NSSDC are printed for each data set.

Foreign Language Children's Books for Fun, with a List of Sources.

ERIC Educational Resources Information Center

Perritt, Patsy H.

This paper attempts to identify and explore multiple lists of recommended books, sources of book reviews, and names of commercial supplies, both foreign and domestic, of foreign language children's books. The languages explored were Spanish, French, German, and Italian. A list of United States publishers, distributors, and dealers in foreign…

Higher Education Opportunities for Minorities and Women--Annotated Selections. 1989 Edition.

ERIC Educational Resources Information Center

Young, William C., Comp.; Hicks, Edward L., Comp.

Developed to assist parents and students in finding sources of postsecondary financial aid, this annotated listing provides a brief summary of the basic information about a selected list of financial aid sources designed primarily for minority groups and women, or available to all students. The listings provide names and addresses, background…

Mechanic: The MPI/HDF code framework for dynamical astronomy

NASA Astrophysics Data System (ADS)

Słonina, Mariusz; Goździewski, Krzysztof; Migaszewski, Cezary

2015-01-01

We introduce the Mechanic, a new open-source code framework. It is designed to reduce the development effort of scientific applications by providing unified API (Application Programming Interface) for configuration, data storage and task management. The communication layer is based on the well-established Message Passing Interface (MPI) standard, which is widely used on variety of parallel computers and CPU-clusters. The data storage is performed within the Hierarchical Data Format (HDF5). The design of the code follows core-module approach which allows to reduce the user’s codebase and makes it portable for single- and multi-CPU environments. The framework may be used in a local user’s environment, without administrative access to the cluster, under the PBS or Slurm job schedulers. It may become a helper tool for a wide range of astronomical applications, particularly focused on processing large data sets, such as dynamical studies of long-term orbital evolution of planetary systems with Monte Carlo methods, dynamical maps or evolutionary algorithms. It has been already applied in numerical experiments conducted for Kepler-11 (Migaszewski et al., 2012) and νOctantis planetary systems (Goździewski et al., 2013). In this paper we describe the basics of the framework, including code listings for the implementation of a sample user’s module. The code is illustrated on a model Hamiltonian introduced by (Froeschlé et al., 2000) presenting the Arnold diffusion. The Arnold web is shown with the help of the MEGNO (Mean Exponential Growth of Nearby Orbits) fast indicator (Goździewski et al., 2008a) applied onto symplectic SABAn integrators family (Laskar and Robutel, 2001).

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Malley, Kathleen; Lopez, Hugo; Cairns, Julie

An overview of the main North American codes and standards associated with hydrogen safety sensors is provided. The distinction between a code and a standard is defined, and the relationship between standards and codes is clarified, especially for those circumstances where a standard or a certification requirement is explicitly referenced within a code. The report identifies three main types of standards commonly applied to hydrogen sensors (interface and controls standards, shock and hazard standards, and performance-based standards). The certification process and a list and description of the main standards and model codes associated with the use of hydrogen safety sensorsmore » in hydrogen infrastructure are presented.« less

Measuring diagnoses: ICD code accuracy.

PubMed

O'Malley, Kimberly J; Cook, Karon F; Price, Matt D; Wildes, Kimberly Raiford; Hurdle, John F; Ashton, Carol M

2005-10-01

To examine potential sources of errors at each step of the described inpatient International Classification of Diseases (ICD) coding process. The use of disease codes from the ICD has expanded from classifying morbidity and mortality information for statistical purposes to diverse sets of applications in research, health care policy, and health care finance. By describing a brief history of ICD coding, detailing the process for assigning codes, identifying where errors can be introduced into the process, and reviewing methods for examining code accuracy, we help code users more systematically evaluate code accuracy for their particular applications. We summarize the inpatient ICD diagnostic coding process from patient admission to diagnostic code assignment. We examine potential sources of errors at each step and offer code users a tool for systematically evaluating code accuracy. Main error sources along the "patient trajectory" include amount and quality of information at admission, communication among patients and providers, the clinician's knowledge and experience with the illness, and the clinician's attention to detail. Main error sources along the "paper trail" include variance in the electronic and written records, coder training and experience, facility quality-control efforts, and unintentional and intentional coder errors, such as misspecification, unbundling, and upcoding. By clearly specifying the code assignment process and heightening their awareness of potential error sources, code users can better evaluate the applicability and limitations of codes for their particular situations. ICD codes can then be used in the most appropriate ways.

Driver anger on the information superhighway: A content analysis of online complaints of offensive driver behaviour.

PubMed

Wickens, Christine M; Wiesenthal, David L; Hall, Ashley; Roseborough, James E W

2013-03-01

In recent years, several websites have been developed allowing drivers to post their complaints about other motorists online. These websites allow drivers to describe the nature of the offensive behaviour and to identify the offending motorist by vehicle type, colour, and license plate number. Some websites also ask drivers to list the location where the event took place and the exact date and time of the offence. The current study was a content analysis of complaints posted to RoadRagers.com between 1999 and 2007 (N=5624). The purpose of the study was to: (1) assess the research value of this novel data source; (2) demonstrate the value of content analysis to the study of driver behaviour; (3) further validate an existing coding scheme; (4) determine whether this new data source would replicate previous research findings regarding the most frequent types of driver complaints and temporal distribution of these reports; (5) provide recommendations for improved driver training and public safety initiatives based on these data. A coding scheme that was originally developed for an assessment of complaints submitted to the Ontario Provincial Police (OPP) (Wickens et al., 2005) was revised to accommodate the new dataset. The inter-rater reliability of the revised coding scheme as applied to the website complaints was very good (kappa=.85). The most frequently reported improper driver behaviours were cutting/weaving, speeding, perceived displays of hostility, and tailgating. Reports were most frequent on weekdays and during the morning and afternoon rush hour. The current study replicated several findings from the analysis of reports to the OPP, but possible differences in the sample and data collection method also produced some differences in findings. The value of content analysis to driver behaviour research and of driver complaint websites as a data source was demonstrated. Implications for driver safety initiatives and future research will be discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

HELIOS: A new open-source radiative transfer code

NASA Astrophysics Data System (ADS)

Malik, Matej; Grosheintz, Luc; Lukas Grimm, Simon; Mendonça, João; Kitzmann, Daniel; Heng, Kevin

2015-12-01

I present the new open-source code HELIOS, developed to accurately describe radiative transfer in a wide variety of irradiated atmospheres. We employ a one-dimensional multi-wavelength two-stream approach with scattering. Written in Cuda C++, HELIOS uses the GPU’s potential of massive parallelization and is able to compute the TP-profile of an atmosphere in radiative equilibrium and the subsequent emission spectrum in a few minutes on a single computer (for 60 layers and 1000 wavelength bins).The required molecular opacities are obtained with the recently published code HELIOS-K [1], which calculates the line shapes from an input line list and resamples the numerous line-by-line data into a manageable k-distribution format. Based on simple equilibrium chemistry theory [2] we combine the k-distribution functions of the molecules H2O, CO2, CO & CH4 to generate a k-table, which we then employ in HELIOS.I present our results of the following: (i) Various numerical tests, e.g. isothermal vs. non-isothermal treatment of layers. (ii) Comparison of iteratively determined TP-profiles with their analytical parametric prescriptions [3] and of the corresponding spectra. (iii) Benchmarks of TP-profiles & spectra for various elemental abundances. (iv) Benchmarks of averaged TP-profiles & spectra for the exoplanets GJ1214b, HD189733b & HD209458b. (v) Comparison with secondary eclipse data for HD189733b, XO-1b & Corot-2b.HELIOS is being developed, together with the dynamical core THOR and the chemistry solver VULCAN, in the group of Kevin Heng at the University of Bern as part of the Exoclimes Simulation Platform (ESP) [4], which is an open-source project aimed to provide community tools to model exoplanetary atmospheres.-----------------------------[1] Grimm & Heng 2015, ArXiv, 1503.03806[2] Heng, Lyons & Tsai, Arxiv, 1506.05501Heng & Lyons, ArXiv, 1507.01944[3] e.g. Heng, Mendonca & Lee, 2014, ApJS, 215, 4H[4] exoclime.net

EarthCollab, building geoscience-centric implementations of the VIVO semantic software suite

NASA Astrophysics Data System (ADS)

Rowan, L. R.; Gross, M. B.; Mayernik, M. S.; Daniels, M. D.; Krafft, D. B.; Kahn, H. J.; Allison, J.; Snyder, C. B.; Johns, E. M.; Stott, D.

2017-12-01

EarthCollab, an EarthCube Building Block project, is extending an existing open-source semantic web application, VIVO, to enable the exchange of information about scientific researchers and resources across institutions. EarthCollab is a collaboration between UNAVCO, a geodetic facility and consortium that supports diverse research projects informed by geodesy, The Bering Sea Project, an interdisciplinary field program whose data archive is hosted by NCAR's Earth Observing Laboratory, and Cornell University. VIVO has been implemented by more than 100 universities and research institutions to highlight research and institutional achievements. This presentation will discuss benefits and drawbacks of working with and extending open source software. Some extensions include plotting georeferenced objects on a map, a mobile-friendly theme, integration of faceting via Elasticsearch, extending the VIVO ontology to capture geoscience-centric objects and relationships, and the ability to cross-link between VIVO instances. Most implementations of VIVO gather information about a single organization. The EarthCollab project created VIVO extensions to enable cross-linking of VIVO instances to reduce the amount of duplicate information about the same people and scientific resources and to enable dynamic linking of related information across VIVO installations. As the list of customizations grows, so does the effort required to maintain compatibility between the EarthCollab forks and the main VIVO code. For example, dozens of libraries and dependencies were updated prior to the VIVO v1.10 release, which introduced conflicts in the EarthCollab cross-linking code. The cross-linking code has been developed to enable sharing of data across different versions of VIVO, however, using a JSON output schema standardized across versions. We will outline lessons learned in working with VIVO and its open source dependencies, which include Jena, Solr, Freemarker, and jQuery and discuss future work by EarthCollab, which includes refining the cross-linking VIVO capabilities by continued integration of persistent and unique identifiers to enable automated lookup and matching across institutional VIVOs.

Selected DOE Headquarters publications, October 1977-September 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1979-11-01

This sixth issue of cumulative listings of DOE Headquarters publications covers the first two years of the Department's operation (October 1, 1977 - September 30, 1979). It lists two groups of publications issued by then-existing Headquarters organizations and provides an index to their title keywords. The two groups of publications are publications assigned a DOE/XXX-type report number code and Headquarters contractor reports prepared by contractors (and published by DOE) to describe research and development work they have performed for the Department. Certain publications are omitted. They include such items as pamphlets, fact sheets, bulletins, newsletters, and telephone directories, as wellmore » as headquarters publications issued under the DOE-tr (DOE translation) and CONF (conference proceedings) codes, and technical reports from the Jet Propulsion Laboratory and NASA issued under DOE/JPL and DOE/NASA codes. The contents of this issue will not be repeated in subsequent issues of DOE/AD-0010. (RWR)« less

Monte Carlo Determination of Dosimetric Parameters of a New (125)I Brachytherapy Source According to AAPM TG-43 (U1) Protocol.

PubMed

Baghani, Hamid Reza; Lohrabian, Vahid; Aghamiri, Mahmoud Reza; Robatjazi, Mostafa

2016-03-01

(125)I is one of the important sources frequently used in brachytherapy. Up to now, several different commercial models of this source type have been introduced to the clinical radiation oncology applications. Recently, a new source model, IrSeed-125, has been added to this list. The aim of the present study is to determine the dosimetric parameters of this new source model based on the recommendations of TG-43 (U1) protocol using Monte Carlo simulation. The dosimetric characteristics of Ir-125 including dose rate constant, radial dose function, 2D anisotropy function and 1D anisotropy function were determined inside liquid water using MCNPX code and compared to those of other commercially available iodine sources. The dose rate constant of this new source was found to be 0.983+0.015 cGyh-1U-1 that was in good agreement with the TLD measured data (0.965 cGyh-1U-1). The 1D anisotropy function at 3, 5, and 7 cm radial distances were obtained as 0.954, 0.953 and 0.959, respectively. The results of this study showed that the dosimetric characteristics of this new brachytherapy source are comparable with those of other commercially available sources. Furthermore, the simulated parameters were in accordance with the previously measured ones. Therefore, the Monte Carlo calculated dosimetric parameters could be employed to obtain the dose distribution around this new brachytherapy source based on TG-43 (U1) protocol.

VizieR Online Data Catalog: ISOCAM survey of Serpens/G3-G6 (Djupvik+, 2006)

NASA Astrophysics Data System (ADS)

Djupvik, A. A.; Andre, P.; Bontemps, S.; Motte, F.; Olofsson, G.; Gaalfalk, M.; Floren, H.-G.

2006-08-01

We present results from an ISOCAM survey in the two broadband filters LW2 (5-8.5um) and LW3 (12-18um) of a 19'x16' field called Serp_NH3 centred on the optical group Serpens/G3-G6. A total of 186 sources were detected in the 6.7um band and/or the 14.3um band to a limiting sensitivity of ~2mJy. These have been cross-correlated with the 2MASS catalogue and are all listed in table1. Deep follow-up photometry in the Ks band obtained with Arnica at the Nordic Optical Telescope (NOT) is listed in table2. Deep L' band photometry of selected sources using SIRCA at the NOT is listed in table3. Continuum emission at 1.3mm and 3.6cm was observed with IRAM and VLA, respectively, and deep imaging in the 2.12um S(1) line of H2 was obtained with NOTCam at the NOT. We find strong evidence for a stellar population of 31 Class II sources (listed in table5), 5 flat-spectrum sources, 5 Class I sources (listed in table4), and two Class 0 sources. Our method does not sample the Class III sources. (3 data files).

Identifying and prioritizing lower value services from Dutch specialist guidelines and a comparison with the UK do-not-do list.

PubMed

Wammes, Joost Johan Godert; van den Akker-van Marle, M Elske; Verkerk, Eva W; van Dulmen, Simone A; Westert, Gert P; van Asselt, Antoinette D I; Kool, R B

2016-11-25

The term 'lower value services' concerns healthcare that is of little or no value to the patient and consequently should not be provided routinely, or not be provided at all. De-adoption of lower value care may occur through explicit recommendations in clinical guidelines. The present study aimed to generate a comprehensive list of lower value services for the Netherlands that assesses the type of care and associated medical conditions. The list was compared with the NICE do-not-do list (United Kingdom). Finally, the feasibility of prioritizing the list was studied to identify conditions where de-adoption is warranted. Dutch clinical guidelines (published from 2010 to 2015) were searched for lower value services. The lower value services identified were categorized by type of care (diagnostics, treatment with and without medication), type of lower value service (not routinely provided or not provided at all), and ICD10 codes (international classification of diseases). The list was prioritized per ICD10 code, based on the number of lower value services per ICD10 code, prevalence, and burden of disease. A total of 1366 lower value services were found in the 193 Dutch guidelines included in our study. Of the lower value services, 30% covered diagnostics, 29% related to surgical and medical treatment without drugs primarily, and 39% related to drug treatment. The majority (77%) of all lower value services was on care that should not be offered at all, whereas the other 23% recommended on care that should not be offered routinely. ICD10 chapters that included most lower value services were neoplasms and diseases of the nervous system. Dutch guidelines appear to contain more lower value services than UK guidelines. The prioritization processes revealed several conditions, including back pain, chronic obstructive pulmonary disease, and ischemic heart diseases, where lower value services most likely occur and de-adoption is warranted. In this study, a comprehensive list of lower value services for Dutch hospital care was developed. A feasible method for prioritizing lower value services was established. Identifying and prioritizing lower value services is the first of several necessary steps in reducing them.

Preliminary design of a solar central receiver for a site-specific repowering application (Saguaro Power Plant). Volume IV. Appendixes. Final report, October 1982-September 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, E.R.

1983-09-01

The appendixes for the Saguaro Power Plant includes the following: receiver configuration selection report; cooperating modes and transitions; failure modes analysis; control system analysis; computer codes and simulation models; procurement package scope descriptions; responsibility matrix; solar system flow diagram component purpose list; thermal storage component and system test plans; solar steam generator tube-to-tubesheet weld analysis; pipeline listing; management control schedule; and system list and definitions.

Complete mitochondrial genome of Germain's Peacock-Pheasant Polyplectron germaini (Aves, Galliformes, Phasianidae).

PubMed

Omeire, Destiny; Abdin, Shaunte; Brooks, Daniel M; Miranda, Hector C

2015-04-01

The Germain's Peacock-Pheasant Polyplectron germaini (Aves, Galliformes, Phasianidae) is classified as Near Threatened on the IUCN Red List. The complete mitochondrial genome of P. germaini is 16,699 bp, consisting of 13 protein-coding genes, 2 rRNA, 22 tRNA genes and 1 control region. All of the 13 protein-coding genes have ATG as start codon. Eight of the 13 protein-coding genes have TAA as stop codon.

Extensions and Adjuncts to the BRL-COMGEOM Program

DTIC Science & Technology

1974-08-01

m MAGIC Code, GIFT Code, Computer Simulation, Target Description, Geometric Modeling Techniques, Vulnerability Analysis 20...Arbitrary Quadric Surf ace.. 0Oo „<>. 7 III. BRITL: A GEOMETRY PREPROCESSOR PROGRAM FOR INPUT TO THE GIFT SYSTEM „ 0 18 A. Introduction <, „. ° 18 B...the BRL- GIFT code. The tasks completed under this contract and described in the report are: Ao The addition to the list of available body types

76 FR 14299 - Listing Endangered and Threatened Species: Correction To Codify in the Code of Federal...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-16

... segment (DPS) as an endangered species under the Endangered Species Act of 1973 (ESA). DATES: Effective.... 110223163-1180-01] RIN 0648-XA231 Listing Endangered and Threatened Species: Correction To Codify in the... the Southern Resident killer whale DPS as an endangered species under the ESA on November 18, 2005 (70...

Key Competencies, Science Education: Secondary Schools (Junior High, J-G Sci) (Senior High, S-Bio).

ERIC Educational Resources Information Center

Kelner, Bernard G.; Hofkin, Fred M.

Presented is a list of behavioral objectives which can be used to evaluate mastery of the competency of students in junior high school science and senior high school biology. These competencies were prepared by the School District of Philadelphia. The lists are comprehensive and coded for easy reference. (CS)

Dental Technology. Career Education. DS Manual 2835.1.

ERIC Educational Resources Information Center

Dependents Schools (DOD), Washington, DC.

This guide is designed for use in helping junior and senior high school students explore the field of dental technology as a potential career area. Included in the manual are the following materials: definitions, a key to the organization and numbering code and symbols used in the lists of objectives, lists of general and program objectives with…

76 FR 30538 - The Commerce Control List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-26

... DEPARTMENT OF COMMERCE Bureau of Industry and Security 15 CFR Part 774 The Commerce Control List CFR Correction In Title 15 of the Code of Federal Regulations, Parts 300 to 799, revised as of January 1, 2011, on page 802, in Supplement No. 1 to Part 774, in Category 6, in ECCN 6A005, the following...

Student Assessment System. Student Performance Record. Task Detailing. Cosmetology. Georgia Vocational Education Program Articulation.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Div. of Vocational Education.

This booklet lists tasks and functions the cosmetology student should be able to do upon entering an employment situation or a postsecondary school. (Listings are also available for the areas of allied health occupations/practical nursing and transportation/automotive mechanics.) Tasks are coded to correspond to those on the Student Performance…

Variable stars around selected open clusters in the VVV area: Young Stellar Objects

NASA Astrophysics Data System (ADS)

Medina, Nicolas; Borissova, Jura; Bayo, Amelia; Kurtev, Radostin; Lucas, Philip

2017-09-01

Time-varying phenomena are one of the most substantial sources of astrophysical information, and led to many fundamental discoveries in modern astronomy. We have developed an automated tool to search and analyze variable sources in the near infrared Ks band, using the data from the Vista Variables in the Vía Láctea (VVV) ESO Public Survey ([5, 8]). One of our main goals is to investigate the Young Stellar Objects (YSOs) in the Galactic star forming regions, looking for: •Variability. •New pre-main sequence star clusters. Here we present the newly discovered YSOs within some selected stellar clusters in our Galaxy.

Medicare program; inpatient rehabilitation facility prospective payment system for federal fiscal year 2015.

PubMed

2014-08-06

This final rule updates the prospective payment rates for inpatient rehabilitation facilities (IRFs) for federal fiscal year (FY) 2015 as required by the statute. This final rule finalizes a policy to collect data on the amount and mode (that is, Individual, Concurrent, Group, and Co-Treatment) of therapy provided in the IRF setting according to therapy discipline, revises the list of diagnosis and impairment group codes that presumptively meet the "60 percent rule'' compliance criteria, provides a way for IRFs to indicate on the Inpatient Rehabilitation Facility-Patient Assessment Instrument (IRF-PAI) form whether the prior treatment and severity requirements have been met for arthritis cases to presumptively meet the "60 percent rule'' compliance criteria, and revises and updates quality measures and reporting requirements under the IRF quality reporting program (QRP). This rule also delays the effective date for the revisions to the list of diagnosis codes that are used to determine presumptive compliance under the "60 percent rule'' that were finalized in FY 2014 IRF PPS final rule and adopts the revisions to the list of diagnosis codes that are used to determine presumptive compliance under the "60 percent rule'' that are finalized in this rule. This final rule also addresses the implementation of the International Classification of Diseases, 10th Revision, Clinical Modification (ICD-10-CM), for the IRF prospective payment system (PPS), which will be effective when ICD-10-CM becomes the required medical data code set for use on Medicare claims and IRF-PAI submissions.

Seismic Canvas: Evolution as a Data Exploration and Analysis Tool

NASA Astrophysics Data System (ADS)

Kroeger, G. C.

2015-12-01

SeismicCanvas, originally developed as a prototype interactive waveform display and printing application for educational use has evolved to include significant data exploration and analysis functionality. The most recent version supports data import from a variety of standard file formats including SAC and mini-SEED, as well as search and download capabilities via IRIS/FDSN Web Services. Data processing tools now include removal of means and trends, interactive windowing, filtering, smoothing, tapering, resampling. Waveforms can be displayed in a free-form canvas or as a record section based on angular or great circle distance, azimuth or back azimuth. Integrated tau-p code allows the calculation and display of theoretical phase arrivals from a variety of radial Earth models. Waveforms can be aligned by absolute time, event time, picked or theoretical arrival times and can be stacked after alignment. Interactive measurements include means, amplitudes, time delays, ray parameters and apparent velocities. Interactive picking of an arbitrary list of seismic phases is supported. Bode plots of amplitude and phase spectra and spectrograms can be created from multiple seismograms or selected windows of seismograms. Direct printing is implemented on all supported platforms along with output of high-resolution pdf files. With these added capabilities, the application is now being used as a data exploration tool for research. Coded in C++ and using the cross-platform Qt framework, the most recent version is available as a 64-bit application for Windows 7-10, Mac OS X 10.6-10.11, and most distributions of Linux, and a 32-bit version for Windows XP and 7. With the latest improvements and refactoring of trace display classes, the 64-bit versions have been tested with over 250 million samples and remain responsive in interactive operations. The source code is available under a LPGLv3 license and both source and executables are available through the IRIS SeisCode repository.

Genome-Wide Identification of Host-Segregating Epidemiological Markers for Source Attribution in Campylobacter jejuni

PubMed Central

Thépault, Amandine; Méric, Guillaume; Rivoal, Katell; Pascoe, Ben; Mageiros, Leonardos; Touzain, Fabrice; Rose, Valérie; Béven, Véronique; Chemaly, Marianne

2017-01-01

ABSTRACT Campylobacter is among the most common worldwide causes of bacterial gastroenteritis. This organism is part of the commensal microbiota of numerous host species, including livestock, and these animals constitute potential sources of human infection. Molecular typing approaches, especially multilocus sequence typing (MLST), have been used to attribute the source of human campylobacteriosis by quantifying the relative abundance of alleles at seven MLST loci among isolates from animal reservoirs and human infection, implicating chicken as a major infection source. The increasing availability of bacterial genomes provides data on allelic variation at loci across the genome, providing the potential to improve the discriminatory power of data for source attribution. Here we present a source attribution approach based on the identification of novel epidemiological markers among a reference pan-genome list of 1,810 genes identified by gene-by-gene comparison of 884 genomes of Campylobacter jejuni isolates from animal reservoirs, the environment, and clinical cases. Fifteen loci involved in metabolic activities, protein modification, signal transduction, and stress response or coding for hypothetical proteins were selected as host-segregating markers and used to attribute the source of 42 French and 281 United Kingdom clinical C. jejuni isolates. Consistent with previous studies of British campylobacteriosis, analyses performed using STRUCTURE software attributed 56.8% of British clinical cases to chicken, emphasizing the importance of this host reservoir as an infection source in the United Kingdom. However, among French clinical isolates, approximately equal proportions of isolates were attributed to chicken and ruminant reservoirs, suggesting possible differences in the relative importance of animal host reservoirs and indicating a benefit for further national-scale attribution modeling to account for differences in production, behavior, and food consumption. IMPORTANCE Accurately quantifying the relative contribution of different host reservoirs to human Campylobacter infection is an ongoing challenge. This study, based on the development of a novel source attribution approach, provides the first results of source attribution in Campylobacter jejuni in France. A systematic analysis using gene-by-gene comparison of 884 genomes of C. jejuni isolates, with a pan-genome list of genes, identified 15 novel epidemiological markers for source attribution. The different proportions of French and United Kingdom clinical isolates attributed to each host reservoir illustrate a potential role for local/national variations in C. jejuni transmission dynamics. PMID:28115376

Schroedinger’s Code: A Preliminary Study on Research Source Code Availability and Link Persistence in Astrophysics

NASA Astrophysics Data System (ADS)

Allen, Alice; Teuben, Peter J.; Ryan, P. Wesley

2018-05-01

We examined software usage in a sample set of astrophysics research articles published in 2015 and searched for the source codes for the software mentioned in these research papers. We categorized the software to indicate whether the source code is available for download and whether there are restrictions to accessing it, and if the source code is not available, whether some other form of the software, such as a binary, is. We also extracted hyperlinks from one journal’s 2015 research articles, as links in articles can serve as an acknowledgment of software use and lead to the data used in the research, and tested them to determine which of these URLs are still accessible. For our sample of 715 software instances in the 166 articles we examined, we were able to categorize 418 records as according to whether source code was available and found that 285 unique codes were used, 58% of which offered the source code for download. Of the 2558 hyperlinks extracted from 1669 research articles, at best, 90% of them were available over our testing period.

76 FR 52871 - Pseudomonas fluorescens Strain CL145A; Exemption From the Requirement of a Tolerance

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-24

..., hydroelectric power facility operator or water supply system operator. Potentially affected entities may include... (NAICS code 221111). Water supply and irrigation systems (NAICS code 221310). This listing is not... treatment areas are limited to completely enclosed pipe or water conveyance systems or concrete chambers...

40 CFR 264.340 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Integration of the MACT standards. (1) Except as provided by paragraphs (b)(2) through (b)(4) of this section... hazardous waste in part 261, subpart D, of this chapter solely because it is ignitable (Hazard Code I... chapter solely because it is reactive (Hazard Code R) for characteristics other than those listed in § 261...

User's guide to the SEPHIS computer code for calculating the Thorex solvent extraction system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watson, S.B.; Rainey, R.H.

1979-05-01

The SEPHIS computer program was developed to simulate the countercurrent solvent extraction process. The code has now been adapted to model the Acid Thorex flow sheet. This report represents a practical user's guide to SEPHIS - Thorex containing a program description, user information, program listing, and sample input and output.

40 CFR Table 10 to Part 455 - List of Appropriate Pollution Control Technologies

Code of Federal Regulations, 2014 CFR

2014-07-01

... Pollution Control Technologies 1 PAI name 2 PAI code 3 Shaughnessy code 4 Structural group 5 Treatment... 42002 EDB Activated Carbon. Vancide TH 004 82901 s-Triazine Activated Carbon. 1,3-Dichloropropene 005... Activated Carbon. Dichlorvos 012 84001 Phosphate Hydrolysis. Landrin-2 013 Carbamate Activated Carbon. 2,3,6...

40 CFR Table 10 to Part 455 - List of Appropriate Pollution Control Technologies

Code of Federal Regulations, 2013 CFR

2013-07-01

... Pollution Control Technologies 1 PAI name 2 PAI code 3 Shaughnessy code 4 Structural group 5 Treatment... 42002 EDB Activated Carbon. Vancide TH 004 82901 s-Triazine Activated Carbon. 1,3-Dichloropropene 005... Activated Carbon. Dichlorvos 012 84001 Phosphate Hydrolysis. Landrin-2 013 Carbamate Activated Carbon. 2,3,6...

40 CFR Table 10 to Part 455 - List of Appropriate Pollution Control Technologies

Code of Federal Regulations, 2012 CFR

2012-07-01

... Pollution Control Technologies 1 PAI name 2 PAI code 3 Shaughnessy code 4 Structural group 5 Treatment... 42002 EDB Activated Carbon. Vancide TH 004 82901 s-Triazine Activated Carbon. 1,3-Dichloropropene 005... Activated Carbon. Dichlorvos 012 84001 Phosphate Hydrolysis. Landrin-2 013 Carbamate Activated Carbon. 2,3,6...

4-Year Cohort Graduation Rate: FAQ

ERIC Educational Resources Information Center

Pennsylvania Department of Education, 2010

2010-01-01

This paper offers a list of questions and corresponding answers about the 4-year cohort graduation rate. Answers to the following questions are presented: (1) Why don't GED (General Educational Development) students count as graduates?; (2) How does a district code students who have moved out of state? How should a district code a student who…

So You Wanna Be a Web Author?

ERIC Educational Resources Information Center

Buchanan, Larry

1996-01-01

Defines HyperText Markup Language (HTML) as it relates to the World Wide Web (WWW). Describes steps needed to create HTML files on a UNIX system and to make them accessible via the WWW. Presents a list of basic HTML formatting codes and explains the coding used in the author's personal HTML file. (JMV)

Automated Concurrent Blackboard System Generation in C++

NASA Technical Reports Server (NTRS)

Kaplan, J. A.; McManus, J. W.; Bynum, W. L.

1999-01-01

In his 1992 Ph.D. thesis, "Design and Analysis Techniques for Concurrent Blackboard Systems", John McManus defined several performance metrics for concurrent blackboard systems and developed a suite of tools for creating and analyzing such systems. These tools allow a user to analyze a concurrent blackboard system design and predict the performance of the system before any code is written. The design can be modified until simulated performance is satisfactory. Then, the code generator can be invoked to generate automatically all of the code required for the concurrent blackboard system except for the code implementing the functionality of each knowledge source. We have completed the port of the source code generator and a simulator for a concurrent blackboard system. The source code generator generates the necessary C++ source code to implement the concurrent blackboard system using Parallel Virtual Machine (PVM) running on a heterogeneous network of UNIX(trademark) workstations. The concurrent blackboard simulator uses the blackboard specification file to predict the performance of the concurrent blackboard design. The only part of the source code for the concurrent blackboard system that the user must supply is the code implementing the functionality of the knowledge sources.

Uni10: an open-source library for tensor network algorithms

NASA Astrophysics Data System (ADS)

Kao, Ying-Jer; Hsieh, Yun-Da; Chen, Pochung

2015-09-01

We present an object-oriented open-source library for developing tensor network algorithms written in C++ called Uni10. With Uni10, users can build a symmetric tensor from a collection of bonds, while the bonds are constructed from a list of quantum numbers associated with different quantum states. It is easy to label and permute the indices of the tensors and access a block associated with a particular quantum number. Furthermore a network class is used to describe arbitrary tensor network structure and to perform network contractions efficiently. We give an overview of the basic structure of the library and the hierarchy of the classes. We present examples of the construction of a spin-1 Heisenberg Hamiltonian and the implementation of the tensor renormalization group algorithm to illustrate the basic usage of the library. The library described here is particularly well suited to explore and fast prototype novel tensor network algorithms and to implement highly efficient codes for existing algorithms.

Archaeology: A Guide to Reference Sources.

ERIC Educational Resources Information Center

Morrison, Doreen, Comp.

This bibliographic guide lists reference sources available at McGill University for research in prehistory and non-classical archaeology. No exclusively biographical sources have been included, but many of the encyclopedias and handbooks contain biographical information and are annotated accordingly. Titles are listed in the following categories:…

Heap leach cyanide irrigation and risk to wildlife: Ramifications for the international cyanide management code.

PubMed

Donato, D B; Madden-Hallett, D M; Smith, G B; Gursansky, W

2017-06-01

Exposed cyanide-bearing solutions associated with gold and silver recovery processes in the mining industry pose a risk to wildlife that interact with these solutions. This has been documented with cyanide-bearing tailings storage facilities, however risks associated with heap leach facilities are poorly documented, monitored and audited. Gold and silver leaching heap leach facilities use cyanide, pH-stabilised, at concentrations deemed toxic to wildlife. Their design and management are known to result in exposed cyanide-bearing solutions that are accessible to and present a risk to wildlife. Monitoring of the presence of exposed solutions, wildlife interaction, interpretation of risks and associated wildlife deaths are poorly documented. This paper provides a list of critical monitoring criteria and attempts to predict wildlife guilds most at risk. Understanding the significance of risks to wildlife from exposed cyanide solutions is complex, involving seasonality, relative position of ponding, temporal nature of ponding, solution palatability, environmental conditions, in situ wildlife species inventory and provision of alternative drinking sources for wildlife. Although a number of heap leach operations are certified as complaint with the International Cyanide Management Code (Cyanide Code), these criteria are not considered by auditors nor has systematic monitoring regime data been published. Without systematic monitoring and further knowledge, wildlife deaths on heap leach facilities are likely to remain largely unrecorded. This has ramifications for those operations certified as compliance with the Cyanide Code. Copyright © 2017 Elsevier Inc. All rights reserved.

You've Written a Cool Astronomy Code! Now What Do You Do with It?

NASA Astrophysics Data System (ADS)

Allen, Alice; Accomazzi, A.; Berriman, G. B.; DuPrie, K.; Hanisch, R. J.; Mink, J. D.; Nemiroff, R. J.; Shamir, L.; Shortridge, K.; Taylor, M. B.; Teuben, P. J.; Wallin, J. F.

2014-01-01

Now that you've written a useful astronomy code for your soon-to-be-published research, you have to figure out what you want to do with it. Our suggestion? Share it! This presentation highlights the means and benefits of sharing your code. Make your code citable -- submit it to the Astrophysics Source Code Library and have it indexed by ADS! The Astrophysics Source Code Library (ASCL) is a free online registry of source codes of interest to astronomers and astrophysicists. With over 700 codes, it is continuing its rapid growth, with an average of 17 new codes a month. The editors seek out codes for inclusion; indexing by ADS improves the discoverability of codes and provides a way to cite codes as separate entries, especially codes without papers that describe them.

Feasibility of using administrative data for identifying medical reasons to delay hip fracture surgery: a Canadian database study.

PubMed

Guy, Pierre; Sheehan, Katie J; Morin, Suzanne N; Waddell, James; Dunbar, Michael; Harvey, Edward; Sirett, Susan; Sobolev, Boris; Kuramoto, Lisa; Tang, Michael

2017-10-05

Failure to account for medically necessary delays may lead to an underestimation of early surgery benefits. This study investigated the feasibility of using administrative data to identify the National Institute for Health and Care Excellence (NICE) 124 guideline list of conditions that appropriately delay hip fracture surgery. We assembled a list of diagnosis and procedure codes to reflect the NICE 124 conditions. The list was reviewed and updated by an advanced clinical coder. The list was refined by five clinical experts. We then screened Canadian Institute for Health Information discharge abstracts for 153 918 patients surgically treated for a non-pathological first hip fracture between 1 January 2004 and 31 December 2012 for diagnosis codes present on admission and procedure codes that antedated hip fracture surgery. We classified abstracts as having medical reasons for delaying surgery based on the presence of these codes. In total, 10 237 (6.7%; 95% CI 6.5% to 6.8%) patients had diagnostic and procedure codes indicating medical reasons for delay. The most common reasons for medical delay were exacerbation of a chronic chest condition (35.9%) and acute chest infection (23.2%). The proportion of patients with reasons for medical delays increased with time from admission to surgery: 3.9% (95% CI 3.6% to 4.1%) for same day surgery; 4.7% (95% CI 4.5% to 4.8%) for surgery 1 day after admission; 7.1% (95% CI 6.9% to 7.4%) for surgery 2 days after admission; and 15.5% (95% CI 15.1% to 16.0%) for surgery more than 2 days after admission. The trend was seen for admissions on weekday working hours, weekday after hours and on weekends. Administrative data can be considered to identify conditions that appropriately delay hip fracture surgery. Accounting for medically necessary delays can improve estimates of the effectiveness of early surgery. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Extraordinary Tools for Extraordinary Science: The Impact ofSciDAC on Accelerator Science&Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryne, Robert D.

2006-08-10

Particle accelerators are among the most complex and versatile instruments of scientific exploration. They have enabled remarkable scientific discoveries and important technological advances that span all programs within the DOE Office of Science (DOE/SC). The importance of accelerators to the DOE/SC mission is evident from an examination of the DOE document, ''Facilities for the Future of Science: A Twenty-Year Outlook''. Of the 28 facilities listed, 13 involve accelerators. Thanks to SciDAC, a powerful suite of parallel simulation tools has been developed that represent a paradigm shift in computational accelerator science. Simulations that used to take weeks or more now takemore » hours, and simulations that were once thought impossible are now performed routinely. These codes have been applied to many important projects of DOE/SC including existing facilities (the Tevatron complex, the Relativistic Heavy Ion Collider), facilities under construction (the Large Hadron Collider, the Spallation Neutron Source, the Linac Coherent Light Source), and to future facilities (the International Linear Collider, the Rare Isotope Accelerator). The new codes have also been used to explore innovative approaches to charged particle acceleration. These approaches, based on the extremely intense fields that can be present in lasers and plasmas, may one day provide a path to the outermost reaches of the energy frontier. Furthermore, they could lead to compact, high-gradient accelerators that would have huge consequences for US science and technology, industry, and medicine. In this talk I will describe the new accelerator modeling capabilities developed under SciDAC, the essential role of multi-disciplinary collaboration with applied mathematicians, computer scientists, and other IT experts in developing these capabilities, and provide examples of how the codes have been used to support DOE/SC accelerator projects.« less

Extraordinary tools for extraordinary science: the impact of SciDAC on accelerator science and technology

NASA Astrophysics Data System (ADS)

Ryne, Robert D.

2006-09-01

Particle accelerators are among the most complex and versatile instruments of scientific exploration. They have enabled remarkable scientific discoveries and important technological advances that span all programs within the DOE Office of Science (DOE/SC). The importance of accelerators to the DOE/SC mission is evident from an examination of the DOE document, ''Facilities for the Future of Science: A Twenty-Year Outlook.'' Of the 28 facilities listed, 13 involve accelerators. Thanks to SciDAC, a powerful suite of parallel simulation tools has been developed that represent a paradigm shift in computational accelerator science. Simulations that used to take weeks or more now take hours, and simulations that were once thought impossible are now performed routinely. These codes have been applied to many important projects of DOE/SC including existing facilities (the Tevatron complex, the Relativistic Heavy Ion Collider), facilities under construction (the Large Hadron Collider, the Spallation Neutron Source, the Linac Coherent Light Source), and to future facilities (the International Linear Collider, the Rare Isotope Accelerator). The new codes have also been used to explore innovative approaches to charged particle acceleration. These approaches, based on the extremely intense fields that can be present in lasers and plasmas, may one day provide a path to the outermost reaches of the energy frontier. Furthermore, they could lead to compact, high-gradient accelerators that would have huge consequences for US science and technology, industry, and medicine. In this talk I will describe the new accelerator modeling capabilities developed under SciDAC, the essential role of multi-disciplinary collaboration with applied mathematicians, computer scientists, and other IT experts in developing these capabilities, and provide examples of how the codes have been used to support DOE/SC accelerator projects.

78 FR 26739 - Notice of Final Action on Petition From Earthjustice To List Coal Mines as a Source Category and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-08

... Action on Petition From Earthjustice To List Coal Mines as a Source Category and To Regulate Air Emissions From Coal Mines AGENCY: Environmental Protection Agency (EPA). ACTION: Denial of petition for... Perciasepe, signed a letter denying a petition to add coal mines to the Clean Air Act (CAA) section 111 list...

26 CFR 1.23-6 - Procedure and criteria for additions to the approved list of energy-conserving components or...

Code of Federal Regulations, 2011 CFR

2011-04-01

... geothermal energy, the energy source must be an inexhaustible energy supply. Accordingly, wood and... approved list of energy-conserving components or renewable energy sources. 1.23-6 Section 1.23-6 Internal... During A Taxable Year § 1.23-6 Procedure and criteria for additions to the approved list of energy...

26 CFR 1.23-6 - Procedure and criteria for additions to the approved list of energy-conserving components or...

Code of Federal Regulations, 2010 CFR

2010-04-01

... geothermal energy, the energy source must be an inexhaustible energy supply. Accordingly, wood and... approved list of energy-conserving components or renewable energy sources. 1.23-6 Section 1.23-6 Internal... During A Taxable Year § 1.23-6 Procedure and criteria for additions to the approved list of energy...

A Combinatorial Geometry Computer Description of the M9 ACE (Armored Combat Earthmover) Vehicle

DTIC Science & Technology

1984-12-01

program requires as input the M9 target descriptions as processed by the Geometric Information for Targets ( GIFT ) ’ computer code. The first step is...model of the target. This COM-GEOM target description is used as input to the Geometric Information For Targets ( GIFT ) computer code. Among other...things, the GIFT code traces shotlines through a COM-GEOM description from any specified aspect, listing pertinent information about each component hit

County-based estimates of nitrogen and phosphorus content of animal manure in the United States for 1982, 1987, and 1992

USGS Publications Warehouse

Puckett, Larry; Hitt, Kerie; Alexander, Richard

1998-01-01

names that correspond to the FIPS codes. 2. Tabular component - Nine tab-delimited ASCII lookup tables of animal counts and nutrient estimates organized by 5-digit state/county FIPS (Federal Information Processing Standards) code. Another table lists the county names that correspond to the FIPS codes. The use of trade names is for identification purposes only and does not constitute endorsement by the U.S. Geological Survey.

Optimum Vessel Performance in Evolving Nonlinear Wave Fields

DTIC Science & Technology

2012-11-01

TEMPEST , the new, nonlinear, time-domain ship motion code being developed by the Navy. Table of Contents Executive Summary i List of Figures iii...domain ship motion code TEMPEST . The radiation and diffraction forces in the level 3.0 version of TEMPEST will be computed by the body-exact strip theory...nonlinear responses of a ship to a seaway are being incorporated into version 3 of TEMPEST , the new, nonlinear, time-domain ship motion code that

NSSDC data listing. [spaceborne experiments and photography

NASA Technical Reports Server (NTRS)

1978-01-01

The National Space Science Data Center (NSSDC) Data Listing is in an abbreviated form compared to the data catalogs normally published by NSSDC/WDC-A-R&S. It is organized by NSSDC spacecraft common name. The launch date and NSSDC ID are printed for each spacecraft. The experiments are listed alphabetically by the principal investigator's name and NSSDC ID are printed for each experiment. The data sets are listed by NSSDC ID following the experiment name. The data set name, data form code, quantity of data, and the time span of the data as verified by NSSDC are printed for each data set. Information on NSSDC facilities and ordering procedures are included.

The random energy model in a magnetic field and joint source channel coding

NASA Astrophysics Data System (ADS)

Merhav, Neri

2008-09-01

We demonstrate that there is an intimate relationship between the magnetic properties of Derrida’s random energy model (REM) of spin glasses and the problem of joint source-channel coding in Information Theory. In particular, typical patterns of erroneously decoded messages in the coding problem have “magnetization” properties that are analogous to those of the REM in certain phases, where the non-uniformity of the distribution of the source in the coding problem plays the role of an external magnetic field applied to the REM. We also relate the ensemble performance (random coding exponents) of joint source-channel codes to the free energy of the REM in its different phases.

User Manual and Source Code for a LAMMPS Implementation of Constant Energy Dissipative Particle Dynamics (DPD-E)

DTIC Science & Technology

2014-06-01

User Manual and Source Code for a LAMMPS Implementation of Constant Energy Dissipative Particle Dynamics (DPD-E) by James P. Larentzos...Laboratory Aberdeen Proving Ground, MD 21005-5069 ARL-SR-290 June 2014 User Manual and Source Code for a LAMMPS Implementation of Constant...3. DATES COVERED (From - To) September 2013–February 2014 4. TITLE AND SUBTITLE User Manual and Source Code for a LAMMPS Implementation of

Student Assessment System. Student Performance Record. Task Detailing. Transportation/Automotive Mechanics. Georgia Vocational Education Program Articulation.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Div. of Vocational Education.

This booklet lists tasks and functions the student in the transportation cluster should be able to do upon entering an employment situation or a postsecondary school. (Listings are also available for the areas of allied health occupations/practical nursing and cosmetology.) Tasks are coded to correspond to those on the Student Performance Record,…

76 FR 33121 - List of Approved Spent Fuel Storage Casks: HI-STORM Flood/Wind Addition

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

... Storage Casks: HI-STORM Flood/Wind Addition AGENCY: Nuclear Regulatory Commission. ACTION: Direct final... regulations to add the Holtec HI-STORM Flood/Wind cask system to the ``List of Approved Spent Fuel Storage... Title 10 of the Code of Federal Regulations Section 72.214 to add the Holtec HI- STORM Flood/Wind cask...

76 FR 12292 - Listing Endangered and Threatened Species: Correction To Codify in the Code of Federal...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-07

... section 4(d) of the Endangered Species Act of 1973 (ESA) apply to the Upper Columbia River steelhead.... 101207606-1138-02] RIN 0648-XA082 Listing Endangered and Threatened Species: Correction To Codify in the... as an endangered species (62 FR 43937; August 18, 1997). In January 2006, we conducted a status...

Utilizing Health Records to Characterize Obesity, Comorbidities, and Health-Care Services in One Human Service Agency in the United States

ERIC Educational Resources Information Center

Fisher, Kathleen; Hardie, Thomas L.; Ranjan, Sobhana; Peterson, Justin

2017-01-01

US surveys report higher prevalence of obesity in adults with intellectual disability. Health records of 40 adults with intellectual disability were retrospectively reviewed for data on health status, problem lists with International Classification of Diseases, Ninth Revision codes, medication lists, and health encounters over 18 months. Mean age…

Rupturing the Codes: The Use of Drama and Dramatic Literature in the History Classroom.

ERIC Educational Resources Information Center

Leistler, John D.

This paper discusses plays and companion art pieces suitable for use in the United States history classroom. After a poster from a production of Max Frisch's "Biedermann und die Brandstifter," the paper presents a list of 18 questions ("lenses") for the study of plays with a historical connection; a list of 15 plays for…

Reds, Greens, Yellows Ease the Spelling Blues.

ERIC Educational Resources Information Center

Irwin, Virginia

1971-01-01

This document reports on a color-coding innovation designed to improve the spelling ability of high school seniors. This color-coded system is based on two assumptions: that color will appeal to the students and that there are three principal reasons for misspelling. Two groups were chosen for the experiments. A basic list of spelling demons was…

76 FR 30081 - National Oil and Hazardous Substances Pollution Contingency Plan; National Priorities List...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-24

... Code 8EPR-SR, 1595 Wynkoop Street, Denver, CO 80202-1129 Hand delivery: Environmental Protection Agency, Region 8, Mail Code 8EPR-SR, 1595 Wynkoop Street, Denver, CO 80202-1129. Such deliveries are only... deliveries of boxed information. Instructions: Direct your comments to Docket ID no. EPA-HQ-SFUND- 1983-0002...

76 FR 27622 - Approval and Promulgation of State Implementation Plan Revisions; Infrastructure Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-12

...), Region 8, Mail Code 8P-AR, 1595 Wynkoop Street, Denver, Colorado 80202-1129. Hand Delivery: Director, Air Program, Environmental Protection Agency (EPA), Region 8, Mail Code 8P-AR, 1595 Wynkoop Street, Denver..., Denver, Colorado 80202-1129. EPA requests that if at all possible, you contact the individual listed in...

40 CFR Table 10 to Part 455 - List of Appropriate Pollution Control Technologies

Code of Federal Regulations, 2011 CFR

2011-07-01

... Technologies 1 PAI name 2 PAI code 3 Shaughnessy code 4 Structural group 5 Treatment technology Dicofol 001... Carbon. Vancide TH 004 82901 s-Triazine Activated Carbon. 1,3-Dichloropropene 005 29001 EDB Hydrolysis... 012 84001 Phosphate Hydrolysis. Landrin-2 013 Carbamate Activated Carbon. 2,3,6-T, S&E or Fenac 014...

77 FR 52083 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing of Proposed Rule Change To List...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... codes of ethics. This Rule requires investment advisers to adopt a code of ethics that reflects the... may purchase fixed income securities issued by U.S. or foreign corporations \\8\\ or financial... stocks. The Fund also may purchase securities issued or guaranteed by the U.S. Government or foreign...

Northwest plant names and symbols for ecosystem inventory and analysis.

Treesearch

G.A. Garrison; J.M. Skovlin; C.E. Poulton; A.H. Winward

1976-01-01

This paper is basically an alpha code and name listing of forest and rangeland grasses, sedges, rushes, forbs, shrubs, and trees of Oregon, Washington, and Idaho. The code expedites recording of vegetation inventory data and is especially useful to those processing their data by contemporary computer systems. Editorial and secretarial personnel will find the name and...

21 CFR 607.35 - Notification of registrant; blood product establishment registration number and NDC Labeler Code.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 7 2011-04-01 2010-04-01 true Notification of registrant; blood product establishment registration number and NDC Labeler Code. 607.35 Section 607.35 Food and Drugs FOOD AND DRUG... PRODUCT LISTING FOR MANUFACTURERS OF HUMAN BLOOD AND BLOOD PRODUCTS Procedures for Domestic Blood Product...

21 CFR 607.35 - Notification of registrant; blood product establishment registration number and NDC Labeler Code.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Notification of registrant; blood product establishment registration number and NDC Labeler Code. 607.35 Section 607.35 Food and Drugs FOOD AND DRUG... PRODUCT LISTING FOR MANUFACTURERS OF HUMAN BLOOD AND BLOOD PRODUCTS Procedures for Domestic Blood Product...

Assessment of incidence of severe sepsis in Sweden using different ways of abstracting International Classification of Diseases codes: difficulties with methods and interpretation of results.

PubMed

Wilhelms, Susanne B; Huss, Fredrik R; Granath, Göran; Sjöberg, Folke

2010-06-01

To compare three International Classification of Diseases code abstraction strategies that have previously been reported to mirror severe sepsis by examining retrospective Swedish national data from 1987 to 2005 inclusive. Retrospective cohort study. Swedish hospital discharge database. All hospital admissions during the period 1987 to 2005 were extracted and these patients were screened for severe sepsis using the three International Classification of Diseases code abstraction strategies, which were adapted for the Swedish version of the International Classification of Diseases. Two code abstraction strategies included both International Classification of Diseases, Ninth Revision and International Classification of Diseases, Tenth Revision codes, whereas one included International Classification of Diseases, Tenth Revision codes alone. None. The three International Classification of Diseases code abstraction strategies identified 37,990, 27,655, and 12,512 patients, respectively, with severe sepsis. The incidence increased over the years, reaching 0.35 per 1000, 0.43 per 1000, and 0.13 per 1000 inhabitants, respectively. During the International Classification of Diseases, Ninth Revision period, we found 17,096 unique patients and of these, only 2789 patients (16%) met two of the code abstraction strategy lists and 14,307 (84%) met one list. The International Classification of Diseases, Tenth Revision period included 46,979 unique patients, of whom 8% met the criteria of all three International Classification of Diseases code abstraction strategies, 7% met two, and 84% met one only. The three different International Classification of Diseases code abstraction strategies generated three almost separate cohorts of patients with severe sepsis. Thus, the International Classification of Diseases code abstraction strategies for recording severe sepsis in use today provides an unsatisfactory way of estimating the true incidence of severe sepsis. Further studies relating International Classification of Diseases code abstraction strategies to the American College of Chest Physicians/Society of Critical Care Medicine scores are needed.

Response to the Point of View of Gregory B. Pauly, David M. Hillis, and David C. Cannatella, by the Anuran Subcommittee of the SSAR/HL/ASIH Scientific and Standard English Names List

USGS Publications Warehouse

Frost, Darrel R.; McDiarmid, Roy W.; Mendelson, Joseph R.

2009-01-01

The Point of View by Gregory Pauly, David Hillis, and David Cannatella misrepresents the motives and activities of the anuran subcommittee of the Scientific and Standard English Names Committee, contains a number of misleading statements, omits evidence and references to critical literature that have already rejected or superseded their positions, and cloaks the limitations of their nomenclatural approach in ambiguous language. Their Point of View is not about promoting transparency in the process of constructing the English Names list, assuring that its taxonomy is adequately reviewed, or promoting nomenclatural stability in any global sense. Rather, their Point of View focuses in large part on a single publication, The Amphibian Tree of Life, which is formally unrelated to the Standard English Names List, and promotes an approach to nomenclature mistakenly asserted by them to be compatible with both the International Code of Zoological Nomenclature and one of its competitors, the PhyloCode.

The CMC/3DPNS computer program for prediction of three-dimensional, subsonic, turbulent aerodynamic juncture region flow. Volume 3: Programmers' manual

NASA Technical Reports Server (NTRS)

Orzechowski, J. A.

1982-01-01

The CMC fluid mechanics program system was developed to transmit the theoretical evolution of finite element numerical solution methodology, applied to nonlinear field problems into a versatile computer code for comprehensive flow field analysis. A detailed view of the code from the standpoint of a computer programmer's use is presented. A system macroflow chart and detailed flow charts of several routines necessary to interact with a theoretican/user to modify the operation of this program are presented. All subroutines and details of usage, primarily for input and output routines are described. Integer and real scalars and a cross reference list denoting subroutine usage for these scalars are outlined. Entry points in dynamic storage vector IZ; the lengths of each vector accompanying the scalar definitions are described. A listing of the routines peculiar to the standard test case and a listing of the input deck and printout for this case are included.

An open framework for automated chemical hazard assessment based on GreenScreen for Safer Chemicals: A proof of concept.

PubMed

Wehage, Kristopher; Chenhansa, Panan; Schoenung, Julie M

2017-01-01

GreenScreen® for Safer Chemicals is a framework for comparative chemical hazard assessment. It is the first transparent, open and publicly accessible framework of its kind, allowing manufacturers and governmental agencies to make informed decisions about the chemicals and substances used in consumer products and buildings. In the GreenScreen® benchmarking process, chemical hazards are assessed and classified based on 18 hazard endpoints from up to 30 different sources. The result is a simple numerical benchmark score and accompanying assessment report that allows users to flag chemicals of concern and identify safer alternatives. Although the screening process is straightforward, aggregating and sorting hazard data is tedious, time-consuming, and prone to human error. In light of these challenges, the present work demonstrates the usage of automation to cull chemical hazard data from publicly available internet resources, assign metadata, and perform a GreenScreen® hazard assessment using the GreenScreen® "List Translator." The automated technique, written as a module in the Python programming language, generates GreenScreen® List Translation data for over 3000 chemicals in approximately 30 s. Discussion of the potential benefits and limitations of automated techniques is provided. By embedding the library into a web-based graphical user interface, the extensibility of the library is demonstrated. The accompanying source code is made available to the hazard assessment community. Integr Environ Assess Manag 2017;13:167-176. © 2016 SETAC. © 2016 SETAC.

Handbook of Reference Sources. Second Edition.

ERIC Educational Resources Information Center

Nichols, Margaret Irby

Designed to serve as a selection aid for small public libraries and to list important sources available through the major resource centers of the Texas Library System, this bibliography lists 804 annotated reference sources with 126 additional works named within the annotations. The books are grouped into 18 major areas, each of which is broken…

Theses in Canada: A Guide to Sources of Information about Theses Completed or in Preparation.

ERIC Educational Resources Information Center

Bruchet, Susan Jaques, Comp.; Evans, Gwynneth, Comp.

This bibliography provides a list of sources for students, scholars, and librarians who want information about theses completed or in preparation at Canadian universities. The sources are presented under three headings: general bibliographies, theses lists by university, and specialized bibliographies. For monographic items, the author, title, and…

Software to model AXAF image quality

NASA Technical Reports Server (NTRS)

Ahmad, Anees

1993-01-01

This draft final report describes the work performed under this delivery order from May 1992 through June 1993. The purpose of this contract was to enhance and develop an integrated optical performance modeling software for complex x-ray optical systems such as AXAF. The GRAZTRACE program developed by the MSFC Optical Systems Branch for modeling VETA-I was used as the starting baseline program. The original program was a large single file program and, therefore, could not be modified very efficiently. The original source code has been reorganized, and a 'Make Utility' has been written to update the original program. The new version of the source code consists of 36 small source files to make it easier for the code developer to manage and modify the program. A user library has also been built and a 'Makelib' utility has been furnished to update the library. With the user library, the users can easily access the GRAZTRACE source files and build a custom library. A user manual for the new version of GRAZTRACE has been compiled. The plotting capability for the 3-D point spread functions and contour plots has been provided in the GRAZTRACE using the graphics package DISPLAY. The Graphics emulator over the network has been set up for programming the graphics routine. The point spread function and the contour plot routines have also been modified to display the plot centroid, and to allow the user to specify the plot range, and the viewing angle options. A Command Mode version of GRAZTRACE has also been developed. More than 60 commands have been implemented in a Code-V like format. The functions covered in this version include data manipulation, performance evaluation, and inquiry and setting of internal parameters. The user manual for these commands has been formatted as in Code-V, showing the command syntax, synopsis, and options. An interactive on-line help system for the command mode has also been accomplished to allow the user to find valid commands, command syntax, and command function. A translation program has been written to convert FEA output from structural analysis to GRAZTRACE surface deformation file (.dfm file). The program can accept standard output files and list files from COSMOS/M and NASTRAN finite analysis programs. Some interactive options are also provided, such as Cartesian or cylindrical coordinate transformation, coordinate shift and scale, and axial length change. A computerized database for technical documents relating to the AXAF project has been established. Over 5000 technical documents have been entered into the master database. A user can now rapidly retrieve the desired documents relating to the AXAF project. The summary of the work performed under this contract is shown.

A step-by-step approach to improve data quality when using commercial business lists to characterize retail food environments.

PubMed

Jones, Kelly K; Zenk, Shannon N; Tarlov, Elizabeth; Powell, Lisa M; Matthews, Stephen A; Horoi, Irina

2017-01-07

Food environment characterization in health studies often requires data on the location of food stores and restaurants. While commercial business lists are commonly used as data sources for such studies, current literature provides little guidance on how to use validation study results to make decisions on which commercial business list to use and how to maximize the accuracy of those lists. Using data from a retrospective cohort study [Weight And Veterans' Environments Study (WAVES)], we (a) explain how validity and bias information from existing validation studies (count accuracy, classification accuracy, locational accuracy, as well as potential bias by neighborhood racial/ethnic composition, economic characteristics, and urbanicity) were used to determine which commercial business listing to purchase for retail food outlet data and (b) describe the methods used to maximize the quality of the data and results of this approach. We developed data improvement methods based on existing validation studies. These methods included purchasing records from commercial business lists (InfoUSA and Dun and Bradstreet) based on store/restaurant names as well as standard industrial classification (SIC) codes, reclassifying records by store type, improving geographic accuracy of records, and deduplicating records. We examined the impact of these procedures on food outlet counts in US census tracts. After cleaning and deduplicating, our strategy resulted in a 17.5% reduction in the count of food stores that were valid from those purchased from InfoUSA and 5.6% reduction in valid counts of restaurants purchased from Dun and Bradstreet. Locational accuracy was improved for 7.5% of records by applying street addresses of subsequent years to records with post-office (PO) box addresses. In total, up to 83% of US census tracts annually experienced a change (either positive or negative) in the count of retail food outlets between the initial purchase and the final dataset. Our study provides a step-by-step approach to purchase and process business list data obtained from commercial vendors. The approach can be followed by studies of any size, including those with datasets too large to process each record by hand and will promote consistency in characterization of the retail food environment across studies.

StarGuides Plus

NASA Astrophysics Data System (ADS)

Heck, A.

StarGuides Plus represents the most comprehensive and accurately validated collection of practical data on organizations involved in astronomy, related space sciences and other related fields. This invaluable reference source (and its companion volume, StarBriefs Plus) should be on the reference shelf of every library, organization or individual with any interest in these areas. The coverage includes relevant universities, scientific committees, institutions, associations, societies, agencies, companies, bibliographic services, data centers, museums, dealers, distributors, funding organizations, journals, manufacturers, meteorological services, national norms & standard institutes, parent associations & societies, publishers, software producers & distributors, and so on. Besides astronomy and associated space sciences, related fields such as aeronautics, aeronomy, astronautics, atmospheric sciences, chemistry, communications, computer sciences, data processing, education, electronics, engineering, energetics, environment, geodesy, geophysics, information handling, management, mathematics, meteorology, optics, physics, remote sensing, and so on, are also covered where appropriate. After some thirty years in continuous compilation, verification and updating, StarGuides Plus currently gathers together some 6,000 entries from 100 countries. The information is presented in a clear, uncluttered manner for direct and easy use. For each entry, all practical data are listed: city, postal and electronic-mail addresses, telephone and fax numbers, URLs for WWW access, foundation years, numbers of members and/or numbers of staff, main activities, publications titles (with frequencies, ISS-Numbers and circulations), names and geographical coordinates of observing sites, names of planetariums, awards (prizes and/or distinctions) granted, etc. The entries are listed alphabetically in each country. An exhaustive index gives a breakdown not only by different designations and acronyms, but also by location and major terms in names. Thematic sub-indices are also provided as well as a list of telephone and telefax national codes. In short, almost anyone involved in any way in the fields of astronomy and related space sciences will find invaluable contact and background information in this volume. All entries have been compiled from data supplied by the listed organizations and all data have been independently verified - making this compilation the most accurate and relevant source available. Link: http://www.wkap.nl/prod/b/1-4020-1926-2

Big Software for SmallSats: Adapting cFS to CubeSat Missions

NASA Technical Reports Server (NTRS)

Cudmore, Alan P.; Crum, Gary Alex; Sheikh, Salman; Marshall, James

2015-01-01

Expanding capabilities and mission objectives for SmallSats and CubeSats is driving the need for reliable, reusable, and robust flight software. While missions are becoming more complicated and the scientific goals more ambitious, the level of acceptable risk has decreased. Design challenges are further compounded by budget and schedule constraints that have not kept pace. NASA's Core Flight Software System (cFS) is an open source solution which enables teams to build flagship satellite level flight software within a CubeSat schedule and budget. NASA originally developed cFS to reduce mission and schedule risk for flagship satellite missions by increasing code reuse and reliability. The Lunar Reconnaissance Orbiter, which launched in 2009, was the first of a growing list of Class B rated missions to use cFS.

Plant engineers solar energy handbook. [Includes glossaries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-01-21

This handbook is to provide plant engineers with factual information on solar energy technology and on the various methods for assessing the future potential of this alternative energy source. The following areas are covered: solar components and systems (collectors, storage, service hot-water systems, space heating with liquid and air systems, space cooling, heat pumps and controls); computer programs for system optimization local solar and weather data; a description of buildings and plants in the San Francisco Bay Area applying solar technology; current Federal and California solar legislation; standards, codes, and performance testing information; a listing of manufacturers, distributors, and professionalmore » services that are available in Northern California; and information access. Finally, solar design checklists are provided for those engineers who wish to design their own systems. (MHR)« less

ESUSA: US endangered species distribution file

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nagy, J.; Calef, C.E.

1979-10-01

This report describes a file containing distribution data on endangered species of the United States of Federal concern pursuant to the Endangered Species Act of 1973. Included for each species are (a) the common name, (b) the scientific name, (c) the family, (d) the group (mammal, bird, etc.), (e) Fish and Wildlife Service (FWS) listing and recovery priorities, (f) the Federal legal status, (g) the geographic distribution by counties or islands, (h) Federal Register citations and (i) the sources of the information on distribution of the species. Status types are endangered, threatened, proposed, formally under review, candidate, deleted, and rejected.more » Distribution is by Federal Information Processing Standard (FIPS) county code and is of four types: designated critical habitat, present range, potential range, and historic range.« less

Data processing with microcode designed with source coding

DOEpatents

McCoy, James A; Morrison, Steven E

2013-05-07

Programming for a data processor to execute a data processing application is provided using microcode source code. The microcode source code is assembled to produce microcode that includes digital microcode instructions with which to signal the data processor to execute the data processing application.

Core Journal Lists: Classic Tool, New Relevance

ERIC Educational Resources Information Center

Paynter, Robin A.; Jackson, Rose M.; Mullen, Laura Bowering

2010-01-01

Reviews the historical context of core journal lists, current uses in collection assessment, and existing methodologies for creating lists. Outlines two next generation core list projects developing new methodologies and integrating novel information/data sources to improve precision: a national-level core psychology list and the other a local…

Cognitive Jointly Optimal Code-Division Channelization and Routing Over Cooperative Links

DTIC Science & Technology

2014-04-01

i List of Figures Fig. 1: Comparison between code-division channelization and FDM. Fig. 2: Secondary receiver SINR as a function of the iteration step...transmission percentage as a function of the number of active links under Cases rank(X′′) = 1 and > 1 (the study includes also the random code assignment...scheme); (b) Instantaneous output SINR of a primary signal against primary SINR-QoS threshold SINRthPU (thick line) and instanta- neous output SINR of

Observations on Polar Coding with CRC-Aided List Decoding

DTIC Science & Technology

2016-09-01

9 v 1. INTRODUCTION Polar codes are a new type of forward error correction (FEC) codes, introduced by Arikan in [1], in which he...error correction (FEC) currently used and planned for use in Navy wireless communication systems. The project’s results from FY14 and FY15 are...good error- correction per- formance. We used the Tal/Vardy method of [5]. The polar encoder uses a row vector u of length N . Let uA be the subvector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoo, Jun Soo; Choi, Yong Joon

The RELAP-7 code verification and validation activities are ongoing under the code assessment plan proposed in the previous document (INL-EXT-16-40015). Among the list of V&V test problems in the ‘RELAP-7 code V&V RTM (Requirements Traceability Matrix)’, the RELAP-7 7-equation model has been tested with additional demonstration problems and the results of these tests are reported in this document. In this report, we describe the testing process, the test cases that were conducted, and the results of the evaluation.

Instruct coders' manual

NASA Technical Reports Server (NTRS)

Friend, J.

1971-01-01

A manual designed both as an instructional manual for beginning coders and as a reference manual for the coding language INSTRUCT, is presented. The manual includes the major programs necessary to implement the teaching system and lists the limitation of current implementation. A detailed description is given of how to code a lesson, what buttons to push, and what utility programs to use. Suggestions for debugging coded lessons and the error messages that may be received during assembly or while running the lesson are given.

Unit cell geometry of multiaxial preforms for structural composites

NASA Technical Reports Server (NTRS)

Ko, Frank; Lei, Charles; Rahman, Anisur; Du, G. W.; Cai, Yun-Jia

1993-01-01

The objective of this study is to investigate the yarn geometry of multiaxial preforms. The importance of multiaxial preforms for structural composites is well recognized by the industry but, to exploit their full potential, engineering design rules must be established. This study is a step in that direction. In this work the preform geometry for knitted and braided preforms was studied by making a range of well designed samples and studying them by photo microscopy. The structural geometry of the preforms is related to the processing parameters. Based on solid modeling and B-spline methodology a software package is developed. This computer code enables real time structural representations of complex fiber architecture based on the rule of preform manufacturing. The code has the capability of zooming and section plotting. These capabilities provide a powerful means to study the effect of processing variables on the preform geometry. the code also can be extended to an auto mesh generator for downstream structural analysis using finite element method. This report is organized into six sections. In the first section the scope and background of this work is elaborated. In section two the unit cell geometries of braided and multi-axial warp knitted preforms is discussed. The theoretical frame work of yarn path modeling and solid modeling is presented in section three. The thin section microscopy carried out to observe the structural geometry of the preforms is the subject in section four. The structural geometry is related to the processing parameters in section five. Section six documents the implementation of the modeling techniques into the computer code MP-CAD. A user manual for the software is also presented here. The source codes and published papers are listed in the Appendices.

Adaptive distributed source coding.

PubMed

Varodayan, David; Lin, Yao-Chung; Girod, Bernd

2012-05-01

We consider distributed source coding in the presence of hidden variables that parameterize the statistical dependence among sources. We derive the Slepian-Wolf bound and devise coding algorithms for a block-candidate model of this problem. The encoder sends, in addition to syndrome bits, a portion of the source to the decoder uncoded as doping bits. The decoder uses the sum-product algorithm to simultaneously recover the source symbols and the hidden statistical dependence variables. We also develop novel techniques based on density evolution (DE) to analyze the coding algorithms. We experimentally confirm that our DE analysis closely approximates practical performance. This result allows us to efficiently optimize parameters of the algorithms. In particular, we show that the system performs close to the Slepian-Wolf bound when an appropriate doping rate is selected. We then apply our coding and analysis techniques to a reduced-reference video quality monitoring system and show a bit rate saving of about 75% compared with fixed-length coding.

Regulatory Information By Sector

EPA Pesticide Factsheets

Find environmental regulatory, compliance, & enforcement information for various business, industry and government sectors, listed by NAICS code. Sectors include agriculture, automotive, petroleum manufacturing, oil & gas extraction & other manufacturing

Phase II evaluation of clinical coding schemes: completeness, taxonomy, mapping, definitions, and clarity. CPRI Work Group on Codes and Structures.

PubMed

Campbell, J R; Carpenter, P; Sneiderman, C; Cohn, S; Chute, C G; Warren, J

1997-01-01

To compare three potential sources of controlled clinical terminology (READ codes version 3.1, SNOMED International, and Unified Medical Language System (UMLS) version 1.6) relative to attributes of completeness, clinical taxonomy, administrative mapping, term definitions and clarity (duplicate coding rate). The authors assembled 1929 source concept records from a variety of clinical information taken from four medical centers across the United States. The source data included medical as well as ample nursing terminology. The source records were coded in each scheme by an investigator and checked by the coding scheme owner. The codings were then scored by an independent panel of clinicians for acceptability. Codes were checked for definitions provided with the scheme. Codes for a random sample of source records were analyzed by an investigator for "parent" and "child" codes within the scheme. Parent and child pairs were scored by an independent panel of medical informatics specialists for clinical acceptability. Administrative and billing code mapping from the published scheme were reviewed for all coded records and analyzed by independent reviewers for accuracy. The investigator for each scheme exhaustively searched a sample of coded records for duplications. SNOMED was judged to be significantly more complete in coding the source material than the other schemes (SNOMED* 70%; READ 57%; UMLS 50%; *p < .00001). SNOMED also had a richer clinical taxonomy judged by the number of acceptable first-degree relatives per coded concept (SNOMED* 4.56, UMLS 3.17; READ 2.14, *p < .005). Only the UMLS provided any definitions; these were found for 49% of records which had a coding assignment. READ and UMLS had better administrative mappings (composite score: READ* 40.6%; UMLS* 36.1%; SNOMED 20.7%, *p < .00001), and SNOMED had substantially more duplications of coding assignments (duplication rate: READ 0%; UMLS 4.2%; SNOMED* 13.9%, *p < .004) associated with a loss of clarity. No major terminology source can lay claim to being the ideal resource for a computer-based patient record. However, based upon this analysis of releases for April 1995, SNOMED International is considerably more complete, has a compositional nature and a richer taxonomy. Is suffers from less clarity, resulting from a lack of syntax and evolutionary changes in its coding scheme. READ has greater clarity and better mapping to administrative schemes (ICD-10 and OPCS-4), is rapidly changing and is less complete. UMLS is a rich lexical resource, with mappings to many source vocabularies. It provides definitions for many of its terms. However, due to the varying granularities and purposes of its source schemes, it has limitations for representation of clinical concepts within a computer-based patient record.

Changes to taxonomy and the International Code of Virus Classification and Nomenclature ratified by the International Committee on Taxonomy of Viruses (2018).

PubMed

King, Andrew M Q; Lefkowitz, Elliot J; Mushegian, Arcady R; Adams, Michael J; Dutilh, Bas E; Gorbalenya, Alexander E; Harrach, Balázs; Harrison, Robert L; Junglen, Sandra; Knowles, Nick J; Kropinski, Andrew M; Krupovic, Mart; Kuhn, Jens H; Nibert, Max L; Rubino, Luisa; Sabanadzovic, Sead; Sanfaçon, Hélène; Siddell, Stuart G; Simmonds, Peter; Varsani, Arvind; Zerbini, Francisco Murilo; Davison, Andrew J

2018-05-12

This article lists the changes to virus taxonomy approved and ratified by the International Committee on Taxonomy of Viruses in February 2018. A total of 451 species, 69 genera, 11 subfamilies, 9 families and one new order were added to the taxonomy. The current totals at each taxonomic level now stand at 9 orders, 131 families, 46 subfamilies, 803 genera and 4853 species. A change was made to the International Code of Virus Classification and Nomenclature to allow the use of the names of people in taxon names under appropriate circumstances. An updated Master Species List incorporating the approved changes was released in March 2018 ( https://talk.ictvonline.org/taxonomy/ ).

The Particle Accelerator Simulation Code PyORBIT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gorlov, Timofey V; Holmes, Jeffrey A; Cousineau, Sarah M

2015-01-01

The particle accelerator simulation code PyORBIT is presented. The structure, implementation, history, parallel and simulation capabilities, and future development of the code are discussed. The PyORBIT code is a new implementation and extension of algorithms of the original ORBIT code that was developed for the Spallation Neutron Source accelerator at the Oak Ridge National Laboratory. The PyORBIT code has a two level structure. The upper level uses the Python programming language to control the flow of intensive calculations performed by the lower level code implemented in the C++ language. The parallel capabilities are based on MPI communications. The PyORBIT ismore » an open source code accessible to the public through the Google Open Source Projects Hosting service.« less

Oceanography Information Sources 70.

ERIC Educational Resources Information Center

Vetter, Richard C.

This booklet lists oceanography information sources in the first section under industries, laboratories and departments of oceanography, and other organizations which can provide free information and materials describing programs and activities. Publications listed in the second section include these educational materials: bibliographies, career…

An Algorithm to Compress Line-transition Data for Radiative-transfer Calculations

NASA Astrophysics Data System (ADS)

Cubillos, Patricio E.

2017-11-01

Molecular line-transition lists are an essential ingredient for radiative-transfer calculations. With recent databases now surpassing the billion-line mark, handling them has become computationally prohibitive, due to both the required processing power and memory. Here I present a temperature-dependent algorithm to separate strong from weak line transitions, reformatting the large majority of the weaker lines into a cross-section data file, and retaining the detailed line-by-line information of the fewer strong lines. For any given molecule over the 0.3-30 μm range, this algorithm reduces the number of lines to a few million, enabling faster radiative-transfer computations without a significant loss of information. The final compression rate depends on how densely populated the spectrum is. I validate this algorithm by comparing Exomol’s HCN extinction-coefficient spectra between the complete (65 million line transitions) and compressed (7.7 million) line lists. Over the 0.6-33 μm range, the average difference between extinction-coefficient values is less than 1%. A Python/C implementation of this algorithm is open-source and available at https://github.com/pcubillos/repack. So far, this code handles the Exomol and HITRAN line-transition format.

PySE: Python Source Extractor for radio astronomical images

NASA Astrophysics Data System (ADS)

Spreeuw, Hanno; Swinbank, John; Molenaar, Gijs; Staley, Tim; Rol, Evert; Sanders, John; Scheers, Bart; Kuiack, Mark

2018-05-01

PySE finds and measures sources in radio telescope images. It is run with several options, such as the detection threshold (a multiple of the local noise), grid size, and the forced clean beam fit, followed by a list of input image files in standard FITS or CASA format. From these, PySe provides a list of found sources; information such as the calculated background image, source list in different formats (e.g. text, region files importable in DS9), and other data may be saved. PySe can be integrated into a pipeline; it was originally written as part of the LOFAR Transient Detection Pipeline (TraP, ascl:1412.011).

Extreme Ultraviolet Explorer Bright Source List

NASA Technical Reports Server (NTRS)

Malina, Roger F.; Marshall, Herman L.; Antia, Behram; Christian, Carol A.; Dobson, Carl A.; Finley, David S.; Fruscione, Antonella; Girouard, Forrest R.; Hawkins, Isabel; Jelinsky, Patrick

1994-01-01

Initial results from the analysis of the Extreme Ultraviolet Explorer (EUVE) all-sky survey (58-740 A) and deep survey (67-364 A) are presented through the EUVE Bright Source List (BSL). The BSL contains 356 confirmed extreme ultraviolet (EUV) point sources with supporting information, including positions, observed EUV count rates, and the identification of possible optical counterparts. One-hundred twenty-six sources have been detected longward of 200 A.

Sex-Role Development in Young Children: Relationships to Behavioral and Attitudinal Measures of Parental Gender Schemas.

ERIC Educational Resources Information Center

Perry, Louise C.; Morgan, Amy K.

To explore early sex-role development, this study examined the gender schemas of parents in relation to the sex-typed toy preferences of their own young children. Subjects were 82 parents of children between the ages of 3 and 8. Test stimuli consisted of 2 equivalent lists of 24 occupations, each list containing 8 occupations coded as typically…

Impacts of DNAPL Source Treatment: Experimental and Modeling Assessment of the Benefits of Partial DNAPL Source Removal

DTIC Science & Technology

2009-09-01

nuclear industry for conducting performance assessment calculations. The analytical FORTRAN code for the DNAPL source function, REMChlor, was...project. The first was to apply existing deterministic codes , such as T2VOC and UTCHEM, to the DNAPL source zone to simulate the remediation processes...but describe the spatial variability of source zones unlike one-dimensional flow and transport codes that assume homogeneity. The Lagrangian models

Nomenclature for congenital and paediatric cardiac disease: the International Paediatric and Congenital Cardiac Code (IPCCC) and the Eleventh Iteration of the International Classification of Diseases (ICD-11).

PubMed

Franklin, Rodney C G; Béland, Marie J; Colan, Steven D; Walters, Henry L; Aiello, Vera D; Anderson, Robert H; Bailliard, Frédérique; Boris, Jeffrey R; Cohen, Meryl S; Gaynor, J William; Guleserian, Kristine J; Houyel, Lucile; Jacobs, Marshall L; Juraszek, Amy L; Krogmann, Otto N; Kurosawa, Hiromi; Lopez, Leo; Maruszewski, Bohdan J; St Louis, James D; Seslar, Stephen P; Srivastava, Shubhika; Stellin, Giovanni; Tchervenkov, Christo I; Weinberg, Paul M; Jacobs, Jeffrey P

2017-12-01

An internationally approved and globally used classification scheme for the diagnosis of CHD has long been sought. The International Paediatric and Congenital Cardiac Code (IPCCC), which was produced and has been maintained by the International Society for Nomenclature of Paediatric and Congenital Heart Disease (the International Nomenclature Society), is used widely, but has spawned many "short list" versions that differ in content depending on the user. Thus, efforts to have a uniform identification of patients with CHD using a single up-to-date and coordinated nomenclature system continue to be thwarted, even if a common nomenclature has been used as a basis for composing various "short lists". In an attempt to solve this problem, the International Nomenclature Society has linked its efforts with those of the World Health Organization to obtain a globally accepted nomenclature tree for CHD within the 11th iteration of the International Classification of Diseases (ICD-11). The International Nomenclature Society has submitted a hierarchical nomenclature tree for CHD to the World Health Organization that is expected to serve increasingly as the "short list" for all communities interested in coding for congenital cardiology. This article reviews the history of the International Classification of Diseases and of the IPCCC, and outlines the process used in developing the ICD-11 congenital cardiac disease diagnostic list and the definitions for each term on the list. An overview of the content of the congenital heart anomaly section of the Foundation Component of ICD-11, published herein in its entirety, is also included. Future plans for the International Nomenclature Society include linking again with the World Health Organization to tackle procedural nomenclature as it relates to cardiac malformations. By doing so, the Society will continue its role in standardising nomenclature for CHD across the globe, thereby promoting research and better outcomes for fetuses, children, and adults with congenital heart anomalies.

BARTTest: Community-Standard Atmospheric Radiative-Transfer and Retrieval Tests

NASA Astrophysics Data System (ADS)

Harrington, Joseph; Himes, Michael D.; Cubillos, Patricio E.; Blecic, Jasmina; Challener, Ryan C.

2018-01-01

Atmospheric radiative transfer (RT) codes are used both to predict planetary and brown-dwarf spectra and in retrieval algorithms to infer atmospheric chemistry, clouds, and thermal structure from observations. Observational plans, theoretical models, and scientific results depend on the correctness of these calculations. Yet, the calculations are complex and the codes implementing them are often written without modern software-verification techniques. The community needs a suite of test calculations with analytically, numerically, or at least community-verified results. We therefore present the Bayesian Atmospheric Radiative Transfer Test Suite, or BARTTest. BARTTest has four categories of tests: analytically verified RT tests of simple atmospheres (single line in single layer, line blends, saturation, isothermal, multiple line-list combination, etc.), community-verified RT tests of complex atmospheres, synthetic retrieval tests on simulated data with known answers, and community-verified real-data retrieval tests.BARTTest is open-source software intended for community use and further development. It is available at https://github.com/ExOSPORTS/BARTTest. We propose this test suite as a standard for verifying atmospheric RT and retrieval codes, analogous to the Held-Suarez test for general circulation models. This work was supported by NASA Planetary Atmospheres grant NX12AI69G, NASA Astrophysics Data Analysis Program grant NNX13AF38G, and NASA Exoplanets Research Program grant NNX17AB62G.

The Effect of Strain upon the Velocity of Sound and the Velocity of Free Retraction for Natural Rubber.

DTIC Science & Technology

1982-05-01

28 - DYN 6/81 DISTRIBUTION LIST No. Copies ,No. Cooies Dr. L.V. Schmidt I Dr. F. Roberto I Assistant Secretary of the Navy Code AFRPL MKPA (R,E, and...Scientific Advisor Directorate of Aerosoace Sciences Commandant of the Marine Corps Bolling Air Force Base Code RD-I Washington, D.C. 20332 Washington

Northwest range-plant symbols adapted to automatic data processing.

Treesearch

George A. Garrison; Jon M. Skovlin

1960-01-01

Many range technicians, agronomists, foresters, biologists, and botanists of various educational institutions and government agencies in the Northwest have been using a four-letter symbol list or code compiled 12 years ago from records of plants collected by the U.S. Forest Service in Oregon and Washington, This code has served well as a means of entering plant names...

78 FR 38750 - Self-Regulatory Organizations; NASDAQ OMX PHLX LLC; Notice of Filing of Proposed Rule Change...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-27

... (also known as origin code) refers to the participant types listed in Rule 1080.08(b) and Rule 1000(b..., and, therefore, is referring to the participant origin codes in Rule 1080.08(b) only. The proposed...-Regulatory Organizations; NASDAQ OMX PHLX LLC; Notice of Filing of Proposed Rule Change Relating to Which...

78 FR 14600 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing of Proposed Rule Change To List...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

... 204A-1 under the Advisers Act relating to codes of ethics. This Rule requires investment advisers to adopt a code of ethics that reflects the fiduciary nature of the relationship to clients as well as... spot foreign exchange contracts (generally required to be settled within two business days) to purchase...

Apollo 16/AS-511/LM-11 operational calibration curves. Volume 1: Calibration curves for command service module CSM 113

NASA Technical Reports Server (NTRS)

Demoss, J. F. (Compiler)

1971-01-01

Calibration curves for the Apollo 16 command service module pulse code modulation downlink and onboard display are presented. Subjects discussed are: (1) measurement calibration curve format, (2) measurement identification, (3) multi-mode calibration data summary, (4) pulse code modulation bilevel events listing, and (5) calibration curves for instrumentation downlink and meter link.

Three-Dimensional, Primitive-Variable Model for Solid-Fuel Ramjet Combustion.

DTIC Science & Technology

1984-02-01

INITIAL DISTRIBUTION LIST ,jo. of Copies 1. Library, Code 0212 2 Dean of Research, Code 012 2 Naval Postgraduate School Monterey, CA 93943 2...Dunlap I G. Jensen I P. Willoughby I P. LaForce 7. Chemical Propulsion Information Agency 2 APL-JHU Johns Hopkins Road Laurel, MD 20810 8. AFAPL 2 Wright-Patterson AFB, OH 45433 R. 0. Stull 19

77 FR 69897 - Comment Request for Information Collection for Occupational Code Assignment, Extension Without...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-21

....onetcenter.org/ombclearance.html . DATES: Written comments must be submitted to the office listed in the... information in the O*NET Web sites including O*NET OnLine ( http://online.onetcenter.org ), My Next Move ( www.MyNextMove.gov ) and My Next Move for Veterans ( www.MyNextMove.org/vets ) O*NET Code Connector ( www...

Phase II Evaluation of Clinical Coding Schemes

PubMed Central

Campbell, James R.; Carpenter, Paul; Sneiderman, Charles; Cohn, Simon; Chute, Christopher G.; Warren, Judith

1997-01-01

Abstract Objective: To compare three potential sources of controlled clinical terminology (READ codes version 3.1, SNOMED International, and Unified Medical Language System (UMLS) version 1.6) relative to attributes of completeness, clinical taxonomy, administrative mapping, term definitions and clarity (duplicate coding rate). Methods: The authors assembled 1929 source concept records from a variety of clinical information taken from four medical centers across the United States. The source data included medical as well as ample nursing terminology. The source records were coded in each scheme by an investigator and checked by the coding scheme owner. The codings were then scored by an independent panel of clinicians for acceptability. Codes were checked for definitions provided with the scheme. Codes for a random sample of source records were analyzed by an investigator for “parent” and “child” codes within the scheme. Parent and child pairs were scored by an independent panel of medical informatics specialists for clinical acceptability. Administrative and billing code mapping from the published scheme were reviewed for all coded records and analyzed by independent reviewers for accuracy. The investigator for each scheme exhaustively searched a sample of coded records for duplications. Results: SNOMED was judged to be significantly more complete in coding the source material than the other schemes (SNOMED* 70%; READ 57%; UMLS 50%; *p <.00001). SNOMED also had a richer clinical taxonomy judged by the number of acceptable first-degree relatives per coded concept (SNOMED* 4.56; UMLS 3.17; READ 2.14, *p <.005). Only the UMLS provided any definitions; these were found for 49% of records which had a coding assignment. READ and UMLS had better administrative mappings (composite score: READ* 40.6%; UMLS* 36.1%; SNOMED 20.7%, *p <. 00001), and SNOMED had substantially more duplications of coding assignments (duplication rate: READ 0%; UMLS 4.2%; SNOMED* 13.9%, *p <. 004) associated with a loss of clarity. Conclusion: No major terminology source can lay claim to being the ideal resource for a computer-based patient record. However, based upon this analysis of releases for April 1995, SNOMED International is considerably more complete, has a compositional nature and a richer taxonomy. It suffers from less clarity, resulting from a lack of syntax and evolutionary changes in its coding scheme. READ has greater clarity and better mapping to administrative schemes (ICD-10 and OPCS-4), is rapidly changing and is less complete. UMLS is a rich lexical resource, with mappings to many source vocabularies. It provides definitions for many of its terms. However, due to the varying granularities and purposes of its source schemes, it has limitations for representation of clinical concepts within a computer-based patient record. PMID:9147343

Detecting and accounting for multiple sources of positional variance in peak list registration analysis and spin system grouping.

PubMed

Smelter, Andrey; Rouchka, Eric C; Moseley, Hunter N B

2017-08-01

Peak lists derived from nuclear magnetic resonance (NMR) spectra are commonly used as input data for a variety of computer assisted and automated analyses. These include automated protein resonance assignment and protein structure calculation software tools. Prior to these analyses, peak lists must be aligned to each other and sets of related peaks must be grouped based on common chemical shift dimensions. Even when programs can perform peak grouping, they require the user to provide uniform match tolerances or use default values. However, peak grouping is further complicated by multiple sources of variance in peak position limiting the effectiveness of grouping methods that utilize uniform match tolerances. In addition, no method currently exists for deriving peak positional variances from single peak lists for grouping peaks into spin systems, i.e. spin system grouping within a single peak list. Therefore, we developed a complementary pair of peak list registration analysis and spin system grouping algorithms designed to overcome these limitations. We have implemented these algorithms into an approach that can identify multiple dimension-specific positional variances that exist in a single peak list and group peaks from a single peak list into spin systems. The resulting software tools generate a variety of useful statistics on both a single peak list and pairwise peak list alignment, especially for quality assessment of peak list datasets. We used a range of low and high quality experimental solution NMR and solid-state NMR peak lists to assess performance of our registration analysis and grouping algorithms. Analyses show that an algorithm using a single iteration and uniform match tolerances approach is only able to recover from 50 to 80% of the spin systems due to the presence of multiple sources of variance. Our algorithm recovers additional spin systems by reevaluating match tolerances in multiple iterations. To facilitate evaluation of the algorithms, we developed a peak list simulator within our nmrstarlib package that generates user-defined assigned peak lists from a given BMRB entry or database of entries. In addition, over 100,000 simulated peak lists with one or two sources of variance were generated to evaluate the performance and robustness of these new registration analysis and peak grouping algorithms.

[Medicinal plants in France, between pharmacy and herb trade: historical and legislative aspects].

PubMed

Lehmann, H

2015-09-01

Medicinal plants are registered on the French Pharmacopoeia in its successive editions, the first dated 1818. The edition which is currently in force, the XIth (2012), comprises two plant lists drawn up by a working group of experts belonging to the ANSM: List A (medicinal plants traditionally used [365 plants]) and list B (medicinal plants with the ratio benefit/risk's evaluation negative [123 plants]). Moreover, a list of medicinal plants with non exclusive therapeutic use has been established. This last list is composed of 147 plants which are thus liberated from the pharmaceutical monopoly, in application of decrees n(o) 2008-839 and 2008-841 dated August 22nd 2008. Medicinal plants are a matter, in France, from pharmaceutical monopoly, which means that they can only be dispensed to public in pharmacy, according to article L. 4211-1/5° of the Public Health Code, except however for a certain number of plants "liberated" from this monopoly. Nevertheless, besides officinal pharmacists, herbalists who obtained their diploma as far as 1941, were habilitated to deliver medicinal plants, even non "liberated", on condition that they are not registered on a list of venomous substances nor classified among the stupefacients, according to the article L. 4211-7 of Public Health Code. Concerning plants for herbal teas, which should be differentiated from herbal teas classified among the herbal medicines, they can be delivered in mixtures form, which are considered as officinal preparations, according to the new French Pharmacopoeia monography of August 1st 2013. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Doclet To Synthesize UML

NASA Technical Reports Server (NTRS)

Barry, Matthew R.; Osborne, Richard N.

2005-01-01

The RoseDoclet computer program extends the capability of Java doclet software to automatically synthesize Unified Modeling Language (UML) content from Java language source code. [Doclets are Java-language programs that use the doclet application programming interface (API) to specify the content and format of the output of Javadoc. Javadoc is a program, originally designed to generate API documentation from Java source code, now also useful as an extensible engine for processing Java source code.] RoseDoclet takes advantage of Javadoc comments and tags already in the source code to produce a UML model of that code. RoseDoclet applies the doclet API to create a doclet passed to Javadoc. The Javadoc engine applies the doclet to the source code, emitting the output format specified by the doclet. RoseDoclet emits a Rose model file and populates it with fully documented packages, classes, methods, variables, and class diagrams identified in the source code. The way in which UML models are generated can be controlled by use of new Javadoc comment tags that RoseDoclet provides. The advantage of using RoseDoclet is that Javadoc documentation becomes leveraged for two purposes: documenting the as-built API and keeping the design documentation up to date.

shiftNMFk 1.1: Robust Nonnegative matrix factorization with kmeans clustering and signal shift, for allocation of unknown physical sources, toy version for open sourcing with publications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alexandrov, Boian S.; Lliev, Filip L.; Stanev, Valentin G.

This code is a toy (short) version of CODE-2016-83. From a general perspective, the code represents an unsupervised adaptive machine learning algorithm that allows efficient and high performance de-mixing and feature extraction of a multitude of non-negative signals mixed and recorded by a network of uncorrelated sensor arrays. The code identifies the number of the mixed original signals and their locations. Further, the code also allows deciphering of signals that have been delayed in regards to the mixing process in each sensor. This code is high customizable and it can be efficiently used for a fast macro-analyses of data. Themore » code is applicable to a plethora of distinct problems: chemical decomposition, pressure transient decomposition, unknown sources/signal allocation, EM signal decomposition. An additional procedure for allocation of the unknown sources is incorporated in the code.« less

Joint Source-Channel Decoding of Variable-Length Codes with Soft Information: A Survey

NASA Astrophysics Data System (ADS)

Guillemot, Christine; Siohan, Pierre

2005-12-01

Multimedia transmission over time-varying wireless channels presents a number of challenges beyond existing capabilities conceived so far for third-generation networks. Efficient quality-of-service (QoS) provisioning for multimedia on these channels may in particular require a loosening and a rethinking of the layer separation principle. In that context, joint source-channel decoding (JSCD) strategies have gained attention as viable alternatives to separate decoding of source and channel codes. A statistical framework based on hidden Markov models (HMM) capturing dependencies between the source and channel coding components sets the foundation for optimal design of techniques of joint decoding of source and channel codes. The problem has been largely addressed in the research community, by considering both fixed-length codes (FLC) and variable-length source codes (VLC) widely used in compression standards. Joint source-channel decoding of VLC raises specific difficulties due to the fact that the segmentation of the received bitstream into source symbols is random. This paper makes a survey of recent theoretical and practical advances in the area of JSCD with soft information of VLC-encoded sources. It first describes the main paths followed for designing efficient estimators for VLC-encoded sources, the key component of the JSCD iterative structure. It then presents the main issues involved in the application of the turbo principle to JSCD of VLC-encoded sources as well as the main approaches to source-controlled channel decoding. This survey terminates by performance illustrations with real image and video decoding systems.

PharmTeX: a LaTeX-Based Open-Source Platform for Automated Reporting Workflow.

PubMed

Rasmussen, Christian Hove; Smith, Mike K; Ito, Kaori; Sundararajan, Vijayakumar; Magnusson, Mats O; Niclas Jonsson, E; Fostvedt, Luke; Burger, Paula; McFadyen, Lynn; Tensfeldt, Thomas G; Nicholas, Timothy

2018-03-16

Every year, the pharmaceutical industry generates a large number of scientific reports related to drug research, development, and regulatory submissions. Many of these reports are created using text processing tools such as Microsoft Word. Given the large number of figures, tables, references, and other elements, this is often a tedious task involving hours of copying and pasting and substantial efforts in quality control (QC). In the present article, we present the LaTeX-based open-source reporting platform, PharmTeX, a community-based effort to make reporting simple, reproducible, and user-friendly. The PharmTeX creators put a substantial effort into simplifying the sometimes complex elements of LaTeX into user-friendly functions that rely on advanced LaTeX and Perl code running in the background. Using this setup makes LaTeX much more accessible for users with no prior LaTeX experience. A software collection was compiled for users not wanting to manually install the required software components. The PharmTeX templates allow for inclusion of tables directly from mathematical software output as well and figures from several formats. Code listings can be included directly from source. No previous experience and only a few hours of training are required to start writing reports using PharmTeX. PharmTeX significantly reduces the time required for creating a scientific report fully compliant with regulatory and industry expectations. QC is made much simpler, since there is a direct link between analysis output and report input. PharmTeX makes available to report authors the strengths of LaTeX document processing without the need for extensive training. Graphical Abstract ᅟ.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watson, C.R.

The SNODOG Glossary is used by the DOE-supported life-span beagle studies to describe medical observations in a standardized format. It is an adaptation of the human medical glossary, SNOMED, which lists 107,165 terms. Each of the five laboratories, Argonne National Laboratory, the Inhalation Toxicology Research Institute, the Pacific Northwest Laboratory, the University of California at Davis, and the University of Utah, has selected an appropriate subset from the published SNOMED glossary and added beagle and research-specific terms. The National Radiobiology Archives is the coordinator of these enhancements, and periodically distributes SNODOG to the respective laboratories. Information donated by Colorado Statemore » University and Oak Ridge National Laboratory has been related to SNODOG and is available in a standardized format. This document is designed for the database manager and the scientist who will be managing or coding medical observations. It is also designed for the scientist analyzing coded information. The document includes: an overview of the NRA and the SNODOG glossary, a discussion of hardware requirements, a review of the SNODOG code structure and printed lists of the 4,770 terms which have been used at least once. Instructions for obtaining electronic copies of the glossary and for nominating additional terms are provided. This document describes the origins and structure of the SNODOG codes, explains code usage at each participating institution, and presents a usage frequency tabulation of the terms for neoplasia. A diskette or magnetic tape containing 15,641 SNODOG codes and translations is available on request.« less

SNODOG Glossary: Part 1, Introduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watson, C.R.

The SNODOG Glossary is used by the DOE-supported life-span beagle studies to describe medical observations in a standardized format. It is an adaptation of the human medical glossary, SNOMED, which lists 107,165 terms. Each of the five laboratories, Argonne National Laboratory, the Inhalation Toxicology Research Institute, the Pacific Northwest Laboratory, the University of California at Davis, and the University of Utah, has selected an appropriate subset from the published SNOMED glossary and added beagle and research-specific terms. The National Radiobiology Archives is the coordinator of these enhancements, and periodically distributes SNODOG to the respective laboratories. Information donated by Colorado Statemore » University and Oak Ridge National Laboratory has been related to SNODOG and is available in a standardized format. This document is designed for the database manager and the scientist who will be managing or coding medical observations. It is also designed for the scientist analyzing coded information. The document includes: an overview of the NRA and the SNODOG glossary, a discussion of hardware requirements, a review of the SNODOG code structure and printed lists of the 4,770 terms which have been used at least once. Instructions for obtaining electronic copies of the glossary and for nominating additional terms are provided. This document describes the origins and structure of the SNODOG codes, explains code usage at each participating institution, and presents a usage frequency tabulation of the terms for neoplasia. A diskette or magnetic tape containing 15,641 SNODOG codes and translations is available on request.« less

Open-Source Development of the Petascale Reactive Flow and Transport Code PFLOTRAN

NASA Astrophysics Data System (ADS)

Hammond, G. E.; Andre, B.; Bisht, G.; Johnson, T.; Karra, S.; Lichtner, P. C.; Mills, R. T.

2013-12-01

Open-source software development has become increasingly popular in recent years. Open-source encourages collaborative and transparent software development and promotes unlimited free redistribution of source code to the public. Open-source development is good for science as it reveals implementation details that are critical to scientific reproducibility, but generally excluded from journal publications. In addition, research funds that would have been spent on licensing fees can be redirected to code development that benefits more scientists. In 2006, the developers of PFLOTRAN open-sourced their code under the U.S. Department of Energy SciDAC-II program. Since that time, the code has gained popularity among code developers and users from around the world seeking to employ PFLOTRAN to simulate thermal, hydraulic, mechanical and biogeochemical processes in the Earth's surface/subsurface environment. PFLOTRAN is a massively-parallel subsurface reactive multiphase flow and transport simulator designed from the ground up to run efficiently on computing platforms ranging from the laptop to leadership-class supercomputers, all from a single code base. The code employs domain decomposition for parallelism and is founded upon the well-established and open-source parallel PETSc and HDF5 frameworks. PFLOTRAN leverages modern Fortran (i.e. Fortran 2003-2008) in its extensible object-oriented design. The use of this progressive, yet domain-friendly programming language has greatly facilitated collaboration in the code's software development. Over the past year, PFLOTRAN's top-level data structures were refactored as Fortran classes (i.e. extendible derived types) to improve the flexibility of the code, ease the addition of new process models, and enable coupling to external simulators. For instance, PFLOTRAN has been coupled to the parallel electrical resistivity tomography code E4D to enable hydrogeophysical inversion while the same code base can be used as a third-party library to provide hydrologic flow, energy transport, and biogeochemical capability to the community land model, CLM, part of the open-source community earth system model (CESM) for climate. In this presentation, the advantages and disadvantages of open source software development in support of geoscience research at government laboratories, universities, and the private sector are discussed. Since the code is open-source (i.e. it's transparent and readily available to competitors), the PFLOTRAN team's development strategy within a competitive research environment is presented. Finally, the developers discuss their approach to object-oriented programming and the leveraging of modern Fortran in support of collaborative geoscience research as the Fortran standard evolves among compiler vendors.