Challenges and strategies to facilitate formulation development of pediatric drug products: Safety qualification of excipients.

PubMed

Buckley, Lorrene A; Salunke, Smita; Thompson, Karen; Baer, Gerri; Fegley, Darren; Turner, Mark A

2018-02-05

A public workshop entitled "Challenges and strategies to facilitate formulation development of pediatric drug products" focused on current status and gaps as well as recommendations for risk-based strategies to support the development of pediatric age-appropriate drug products. Representatives from industry, academia, and regulatory agencies discussed the issues within plenary, panel, and case-study breakout sessions. By enabling practical and meaningful discussion between scientists representing the diversity of involved disciplines (formulators, nonclinical scientists, clinicians, and regulators) and geographies (eg, US, EU), the Excipients Safety workshop session was successful in providing specific and key recommendations for defining paths forward. Leveraging orthogonal sources of data (eg. food industry, agro science), collaborative data sharing, and increased awareness of the existing sources such as the Safety and Toxicity of Excipients for Paediatrics (STEP) database will be important to address the gap in excipients knowledge needed for risk assessment. The importance of defining risk-based approaches to safety assessments for excipients vital to pediatric formulations was emphasized, as was the need for meaningful stakeholder (eg, patient, caregiver) engagement. Copyright © 2017 Elsevier B.V. All rights reserved.

Experience With Laser Safety In The USA--A Review

NASA Astrophysics Data System (ADS)

Sliney, David H.

1986-10-01

Following several research programs in the 1960's aimed at studying the adverse biological effects of lasers and other optical radiation sources, laser occupational exposure limits were set and general safety standards were developed. Today, the experience from laser accidents and the development of new lasers and new applications have altered the format of the exposure limits and the safety procedures. It is critically important to distinguish between different biological injury mechanisms. The biological effects of ultraviolet radiation upon the skin and eye are additive over a period of at least one workday, and require different safety procedures. The scattered UV irradiance from excimer lasers may be quite hazardous, depending upon wavelength and action spectra. Since laser technology is young, the exposure of an individual in natural sunlight must be studied to evaluate the potential for chronic effects. The safety measures necessary in the use of lasers depend upon a hazard evaluation. The appropriate control measures and alternate means of enclosure, baffling, and operational control measures are presented. Present laser safety standards are explained briefly. Eye protective techniques and eyewear are considered for a variety of sources. The optical properties of enclosure materials are also discussed.

Using resources for scientific-driven pharmacovigilance: from many product safety documents to one product safety master file.

PubMed

Furlan, Giovanni

2012-08-01

Current regulations require a description of the overall safety profile or the specific risks of a drug in multiple documents such as the Periodic and Development Safety Update Reports, Risk Management Plans (RMPs) and Signal Detection Reports. In a resource-constrained world, the need for preparing multiple documents reporting the same information results in shifting the focus from a thorough scientific and medical evaluation of the available data to maintaining compliance with regulatory timelines. Since the aim of drug safety is to understand and characterize product issues to take adequate risk minimization measures rather than to comply with bureaucratic requirements, there is the need to avoid redundancy. In order to identify core drug safety activities that need to be undertaken to protect patient safety and reduce the number of documents reporting the results of these activities, the author has reviewed the main topics included in the drug safety guidelines and templates. The topics and sources that need to be taken into account in the main regulatory documents have been found to greatly overlap and, in the future, as a result of the new Periodic Safety Update Report structure and requirements, in the author's opinion this overlap is likely to further increase. Many of the identified inter-document differences seemed to be substantially formal. The Development Safety Update Report, for example, requires separate presentation of the safety issues emerging from different sources followed by an overall evaluation of each safety issue. The RMP, instead, requires a detailed description of the safety issues without separate presentation of the evidence derived from each source. To some extent, however, the individual documents require an in-depth analysis of different aspects; the RMP, for example, requires an epidemiological description of the indication for which the drug is used and its risks. At the time of writing this article, this is not specifically required by other documents. The author has identified signal detection (intended not only as adverse event disproportionate reporting, but including non-clinical, laboratory, clinical analysis data and literature screening) and characterization as the basis for the preparation of all drug safety documents, which can be viewed as different ways of presenting the results of this activity. Therefore, the author proposes to merge all the aggregate reports required by current regulations into a single document - the Drug Safety Master File. This report should contain all the available information, from any source, regarding the potential and identified risks of a drug. It should be a living document updated and submitted to regulatory authorities on an ongoing basis.

NASA's Aviation Safety and Modeling Project

NASA Technical Reports Server (NTRS)

Chidester, Thomas R.; Statler, Irving C.

2006-01-01

The Aviation Safety Monitoring and Modeling (ASMM) Project of NASA's Aviation Safety program is cultivating sources of data and developing automated computer hardware and software to facilitate efficient, comprehensive, and accurate analyses of the data collected from large, heterogeneous databases throughout the national aviation system. The ASMM addresses the need to provide means for increasing safety by enabling the identification and correcting of predisposing conditions that could lead to accidents or to incidents that pose aviation risks. A major component of the ASMM Project is the Aviation Performance Measuring System (APMS), which is developing the next generation of software tools for analyzing and interpreting flight data.

Performance of Compiler-Assisted Memory Safety Checking

DTIC Science & Technology

2014-08-01

software developer has in mind a particular object to which the pointer should point, the intended referent. A memory access error occurs when an ac...Performance of Compiler-Assisted Memory Safety Checking David Keaton Robert C. Seacord August 2014 TECHNICAL NOTE CMU/SEI-2014-TN...based memory safety checking tool and the performance that can be achieved with two such tools whose source code is freely available. The note then

Field Application of the Micro Biological Survey Method for the Assessment of the Microbiological Safety of Different Water Sources in Horn of Africa and the Evaluation of the Effectiveness of Moringa Oleifera in Drinking Water Purification

PubMed Central

Losito, Francesca; Arienzo, Alyexandra; Somma, Daniela; Murgia, Lorenza; Stalio, Ottavia; Zuppi, Paolo; Rossi, Elisabetta; Antonini, Giovanni

2017-01-01

Water monitoring requires expensive instrumentations and skilled technicians. In developing Countries as Africa, the severe economic restrictions and lack of technology make water safety monitoring approaches applied in developed Countries, still not sustainable. The need to develop new methods that are suitable, affordable, and sustainable in the African context is urgent. The simple, economic and rapid Micro Biological Survey (MBS) method does not require an equipped laboratory nor special instruments and skilled technicians, but it can be very useful for routine water analysis. The aim of this work was the application of the MBS method to evaluate the microbiological safety of different water sources and the effectiveness of different drinking water treatments in the Horn of Africa. The obtained results have proved that this method could be very helpful to monitor water safety before and after various purification treatments, with the aim to control waterborne diseases especially in developing Countries, whose population is the most exposed to these diseases. In addition, it has been proved that Moringa oleifera water treatment is ineffective in decreasing bacterial load of Eritrea water samples. PMID:28748063

Field Application of the Micro Biological Survey Method for the Assessment of the Microbiological Safety of Different Water Sources in Horn of Africa and the Evaluation of the Effectiveness of Moringa Oleifera in Drinking Water Purification.

PubMed

Losito, Francesca; Arienzo, Alyexandra; Somma, Daniela; Murgia, Lorenza; Stalio, Ottavia; Zuppi, Paolo; Rossi, Elisabetta; Antonini, Giovanni

2017-06-23

Water monitoring requires expensive instrumentations and skilled technicians. In developing Countries as Africa, the severe economic restrictions and lack of technology make water safety monitoring approaches applied in developed Countries, still not sustainable. The need to develop new methods that are suitable, affordable, and sustainable in the African context is urgent. The simple, economic and rapid Micro Biological Survey (MBS) method does not require an equipped laboratory nor special instruments and skilled technicians, but it can be very useful for routine water analysis. The aim of this work was the application of the MBS method to evaluate the microbiological safety of different water sources and the effectiveness of different drinking water treatments in the Horn of Africa. The obtained results have proved that this method could be very helpful to monitor water safety before and after various purification treatments, with the aim to control waterborne diseases especially in developing Countries, whose population is the most exposed to these diseases. In addition, it has been proved that Moringa oleifera water treatment is ineffective in decreasing bacterial load of Eritrea water samples.

Developing patient safety in dentistry.

PubMed

Pemberton, M N

2014-10-01

Patient safety has always been important and is a source of public concern. Recent high profile scandals and subsequent reports, such as the Francis report into the failings at Mid Staffordshire, have raised those concerns even higher. Mortality and significant morbidity associated with the practice of medicine has led to many strategies to help improve patient safety, however, with its lack of associated mortality and lower associated morbidity, dentistry has been slower at systematically considering how patient safety can be improved. Recently, several organisations, researchers and clinicians have discussed the need for a patient safety culture in dentistry. Strategies are available to help improve patient safety in healthcare and deserve further consideration in dentistry.

Mapping Sources of Food Safety Information for U.S. Consumers: Findings From a National Survey.

PubMed

Nan, Xiaoli; Verrill, Linda; Kim, Jarim

2017-03-01

This research examines the sources from which U.S. consumers obtain their food safety information. It seeks to determine differences in the types of information sources used by U.S. consumers of different sociodemographic background, as well as the relationships between the types of information sources used and food safety risk perceptions. Analyzing the 2010 Food Safety Survey (N = 4,568) conducted by the U.S. Food and Drug Administration, we found that age, gender, education, and race predicted the use of different sources for food safety information. Additionally, use of several information sources predicted perceived susceptibility to foodborne illnesses and severity of food contamination. Implications of the findings for food safety risk communication are discussed.

Waste collection in developing countries - Tackling occupational safety and health hazards at their source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bleck, Daniela, E-mail: bleck.daniela@baua.bund.de; Wettberg, Wieland, E-mail: wettberg.wieland@baua.bund.de

2012-11-15

Waste management procedures in developing countries are associated with occupational safety and health risks. Gastro-intestinal infections, respiratory and skin diseases as well as muscular-skeletal problems and cutting injuries are commonly found among waste workers around the globe. In order to find efficient, sustainable solutions to reduce occupational risks of waste workers, a methodological risk assessment has to be performed and counteractive measures have to be developed according to an internationally acknowledged hierarchy. From a case study in Addis Ababa, Ethiopia suggestions for the transferral of collected household waste into roadside containers are given. With construction of ramps to dump collectedmore » household waste straight into roadside containers and an adaptation of pushcarts and collection procedures, the risk is tackled at the source.« less

Manned space flight nuclear system safety. Voluem 5: Nuclear system safety guidelines. Part 2: Space shuttle/nuclear payloads safety

NASA Technical Reports Server (NTRS)

1972-01-01

The design and operations guidelines and requirements developed in the study of space shuttle nuclear system transportation are presented. Guidelines and requirements are presented for the shuttle, nuclear payloads (reactor, isotope-Brayton and small isotope sources), ground support systems and facilities. Cross indices and references are provided which relate guidelines to each other, and to substantiating data in other volumes. The guidelines are intended for the implementation of nuclear safety related design and operational considerations in future space programs.

Influence of Design Variations on Systems Performance

NASA Technical Reports Server (NTRS)

Tumer, Irem Y.; Stone, Robert B.; Huff, Edward M.; Norvig, Peter (Technical Monitor)

2000-01-01

High-risk aerospace components have to meet very stringent quality, performance, and safety requirements. Any source of variation is a concern, as it may result in scrap or rework. poor performance, and potentially unsafe flying conditions. The sources of variation during product development, including design, manufacturing, and assembly, and during operation are shown. Sources of static and dynamic variation during development need to be detected accurately in order to prevent failure when the components are placed in operation. The Systems' Health and Safety (SHAS) research at the NASA Ames Research Center addresses the problem of detecting and evaluating the statistical variation in helicopter transmissions. In this work, we focus on the variations caused by design, manufacturing, and assembly of these components, prior to being placed in operation (DMV). In particular, we aim to understand and represent the failure and variation information, and their correlation to performance and safety and feed this information back into the development cycle at an early stage. The feedback of such critical information will assure the development of more reliable components with less rework and scrap. Variations during design and manufacturing are a common source of concern in the development and production of such components. Accounting for these variations, especially those that have the potential to affect performance, is accomplished in a variety ways, including Taguchi methods, FMEA, quality control, statistical process control, and variation risk management. In this work, we start with the assumption that any of these variations can be represented mathematically, and accounted for by using analytical tools incorporating these mathematical representations. In this paper, we concentrate on variations that are introduced during design. Variations introduced during manufacturing are investigated in parallel work.

Ventilator-Related Adverse Events: A Taxonomy and Findings From 3 Incident Reporting Systems.

PubMed

Pham, Julius Cuong; Williams, Tamara L; Sparnon, Erin M; Cillie, Tam K; Scharen, Hilda F; Marella, William M

2016-05-01

In 2009, researchers from Johns Hopkins University's Armstrong Institute for Patient Safety and Quality; public agencies, including the FDA; and private partners, including the Emergency Care Research Institute and the University HealthSystem Consortium (UHC) Safety Intelligence Patient Safety Organization, sought to form a public-private partnership for the promotion of patient safety (P5S) to advance patient safety through voluntary partnerships. The study objective was to test the concept of the P5S to advance our understanding of safety issues related to ventilator events, to develop a common classification system for categorizing adverse events related to mechanical ventilators, and to perform a comparison of adverse events across different adverse event reporting systems. We performed a cross-sectional analysis of ventilator-related adverse events reported in 2012 from the following incident reporting systems: the Pennsylvania Patient Safety Authority's Patient Safety Reporting System, UHC's Safety Intelligence Patient Safety Organization database, and the FDA's Manufacturer and User Facility Device Experience database. Once each organization had its dataset of ventilator-related adverse events, reviewers read the narrative descriptions of each event and classified it according to the developed common taxonomy. A Pennsylvania Patient Safety Authority, FDA, and UHC search provided 252, 274, and 700 relevant reports, respectively. The 3 event types most commonly reported to the UHC and the Pennsylvania Patient Safety Authority's Patient Safety Reporting System databases were airway/breathing circuit issue, human factor issues, and ventilator malfunction events. The top 3 event types reported to the FDA were ventilator malfunction, power source issue, and alarm failure. Overall, we found that (1) through the development of a common taxonomy, adverse events from 3 reporting systems can be evaluated, (2) the types of events reported in each database were related to the purpose of the database and the source of the reports, resulting in significant differences in reported event categories across the 3 systems, and (3) a public-private collaboration for investigating ventilator-related adverse events under the P5S model is feasible. Copyright © 2016 by Daedalus Enterprises.

Radiation exposure control from the application of nuclear gauges in the mining industry in Ghana.

PubMed

Faanu, A; Darko, E O; Awudu, A R; Schandorf, C; Emi-Reynolds, G; Yeboah, J; Glover, E T; Kattah, V K

2010-05-01

The use of nuclear gauges for process control and elemental analysis in the mining industry in Ghana, West Africa, is wide spread and on the increase in recent times. The Ghana Radiation Protection Board regulates nuclear gauges through a system of notification and authorization by registration or licensing, inspection, and enforcement. Safety assessments for authorization and enforcement have been established to ensure the safety and security of radiation sources as well as protection of workers and the general public. Appropriate training of mine staff is part of the efforts to develop the necessary awareness about the safety and security of radiation sources. The knowledge and skills acquired will ensure the required protection and safety at the workplaces. Doses received by workers monitored over a period between 1998 and 2007 are well below the annual dose limit of 20 mSv recommended by the International Commission on Radiological Protection.

[Preliminary studies on critical control point of traceability system in wolfberry].

PubMed

Liu, Sai; Xu, Chang-Qing; Li, Jian-Ling; Lin, Chen; Xu, Rong; Qiao, Hai-Li; Guo, Kun; Chen, Jun

2016-07-01

As a traditional Chinese medicine, wolfberry (Lycium barbarum) has a long cultivation history and a good industrial development foundation. With the development of wolfberry production, the expansion of cultivation area and the increased attention of governments and consumers on food safety, the quality and safety requirement of wolfberry is higher demanded. The quality tracing and traceability system of production entire processes is the important technology tools to protect the wolfberry safety, and to maintain sustained and healthy development of the wolfberry industry. Thus, this article analyzed the wolfberry quality management from the actual situation, the safety hazard sources were discussed according to the HACCP (hazard analysis and critical control point) and GAP (good agricultural practice for Chinese crude drugs), and to provide a reference for the traceability system of wolfberry. Copyright© by the Chinese Pharmaceutical Association.

Thulium heat source IR D Project 91-031

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walter, C.E.; Kammeraad, J.E.; Newman, J.G.

1991-01-01

The goal of the Thulium Heat Source study is to determine the performance capability and evaluate the safety and environmental aspects of a thulium-170 heat source. Thulium-170 has several attractive features, including the fact that it decays to a stable, chemically innocuous isotope in a relatively short time. A longer-range goal is to attract government funding for the development, fabrication, and demonstration testing in an Autonomous Underwater Vehicle (AUV) of one or more thulium isotope power (TIP) prototype systems. The approach is to study parametrically the performance of thulium-170 heat source designs in the power range of 5-50 kW{sub th}.more » At least three heat source designs will be characterized in this power range to assess their performance, mass, and volume. The authors will determine shielding requirements, and consider the safety and environmental aspects of their use.« less

A Guide to Flammable Products and Ignition Sources for Elementary Schools.

ERIC Educational Resources Information Center

Consumer Product Safety Commission, Washington, DC.

This guide is intended as a resource manual and activity sourcebook for elementary school teachers, librarians, administrators, curriculum planners, and teacher educators for teaching proper methods for selecting, using, maintaining, and disposing of flammable products and ignition sources. Basic product safety messages are developed for matches,…

Assessing Drinking Water Quality and Water Safety Management in Sub-Saharan Africa Using Regulated Monitoring Data.

PubMed

Kumpel, Emily; Peletz, Rachel; Bonham, Mateyo; Khush, Ranjiv

2016-10-18

Universal access to safe drinking water is prioritized in the post-2015 Sustainable Development Goals. Collecting reliable and actionable water quality information in low-resource settings, however, is challenging, and little is known about the correspondence between water quality data collected by local monitoring agencies and global frameworks for water safety. Using 42 926 microbial water quality test results from 32 surveillance agencies and water suppliers in seven sub-Saharan African countries, we determined the degree to which water sources were monitored, how water quality varied by source type, and institutional responses to results. Sixty-four percent of the water samples were collected from piped supplies, although the majority of Africans rely on nonpiped sources. Piped supplies had the lowest levels of fecal indicator bacteria (FIB) compared to any other source type: only 4% of samples of water piped to plots and 2% of samples from water piped to public taps/standpipes were positive for FIB (n = 14 948 and n = 12 278, respectively). Among other types of improved sources, samples from harvested rainwater and boreholes were less often positive for FIB (22%, n = 167 and 31%, n = 3329, respectively) than protected springs or protected dug wells (39%, n = 472 and 65%, n = 505). When data from different settings were aggregated, the FIB levels in different source types broadly reflected the source-type water safety framework used by the Joint Monitoring Programme. However, the insufficient testing of nonpiped sources relative to their use indicates important gaps in current assessments. Our results emphasize the importance of local data collection for water safety management and measurement of progress toward universal safe drinking water access.

Duke Surgery Patient Safety: an open-source application for anonymous reporting of adverse and near-miss surgical events

PubMed Central

Pietrobon, Ricardo; Lima, Raquel; Shah, Anand; Jacobs, Danny O; Harker, Matthew; McCready, Mariana; Martins, Henrique; Richardson, William

2007-01-01

Background Studies have shown that 4% of hospitalized patients suffer from an adverse event caused by the medical treatment administered. Some institutions have created systems to encourage medical workers to report these adverse events. However, these systems often prove to be inadequate and/or ineffective for reviewing the data collected and improving the outcomes in patient safety. Objective To describe the Web-application Duke Surgery Patient Safety, designed for the anonymous reporting of adverse and near-miss events as well as scheduled reporting to surgeons and hospital administration. Software architecture DSPS was developed primarily using Java language running on a Tomcat server and with MySQL database as its backend. Results Formal and field usability tests were used to aid in development of DSPS. Extensive experience with DSPS at our institution indicate that DSPS is easy to learn and use, has good speed, provides needed functionality, and is well received by both adverse-event reporters and administrators. Discussion This is the first description of an open-source application for reporting patient safety, which allows the distribution of the application to other institutions in addition for its ability to adapt to the needs of different departments. DSPS provides a mechanism for anonymous reporting of adverse events and helps to administer Patient Safety initiatives. Conclusion The modifiable framework of DSPS allows adherence to evolving national data standards. The open-source design of DSPS permits surgical departments with existing reporting mechanisms to integrate them with DSPS. The DSPS application is distributed under the GNU General Public License. PMID:17472749

Duke Surgery Patient Safety: an open-source application for anonymous reporting of adverse and near-miss surgical events.

PubMed

Pietrobon, Ricardo; Lima, Raquel; Shah, Anand; Jacobs, Danny O; Harker, Matthew; McCready, Mariana; Martins, Henrique; Richardson, William

2007-05-01

Studies have shown that 4% of hospitalized patients suffer from an adverse event caused by the medical treatment administered. Some institutions have created systems to encourage medical workers to report these adverse events. However, these systems often prove to be inadequate and/or ineffective for reviewing the data collected and improving the outcomes in patient safety. To describe the Web-application Duke Surgery Patient Safety, designed for the anonymous reporting of adverse and near-miss events as well as scheduled reporting to surgeons and hospital administration. SOFTWARE ARCHITECTURE: DSPS was developed primarily using Java language running on a Tomcat server and with MySQL database as its backend. Formal and field usability tests were used to aid in development of DSPS. Extensive experience with DSPS at our institution indicate that DSPS is easy to learn and use, has good speed, provides needed functionality, and is well received by both adverse-event reporters and administrators. This is the first description of an open-source application for reporting patient safety, which allows the distribution of the application to other institutions in addition for its ability to adapt to the needs of different departments. DSPS provides a mechanism for anonymous reporting of adverse events and helps to administer Patient Safety initiatives. The modifiable framework of DSPS allows adherence to evolving national data standards. The open-source design of DSPS permits surgical departments with existing reporting mechanisms to integrate them with DSPS. The DSPS application is distributed under the GNU General Public License.

Safety assessment of borehole disposal of unwanted radioactive sealed sources in Egypt using Goldsim.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cochran, John Russell; Mattie, Patrick D.

2004-10-01

A radioactive sealed source is any radioactive material that is encased in a capsule designed to prevent leakage or escape of the radioactive material. Radioactive sealed sources are used for a wide variety of applications at hospitals, in manufacturing and research. Typical uses are in portable gauges to measure soil compaction and moisture or to determine physical properties of rocks units in boreholes (well logging). Hospitals and clinics use radioactive sealed sources for teletherapy and brachytherapy. Oil exploration and medicine are the largest users. Accidental mismanagement of radioactive sealed sources each year results in a large number of people receivingmore » very high or even fatal does of ionizing radiation. Deliberate mismanagement is a growing international concern. Sealed sources must be managed and disposed effectively in order to protect human health and the environment. Effective national safety and management infrastructures are prerequisites for efficient and safe transportation, treatment, storage, and disposal. The Integrated Management Program for Radioactive Sealed Sources in Egypt (IMPRSS) is a cooperative development agreement between the Egyptian Atomic Energy Authority (EAEA), Egyptian Ministry of Health (MOH), Sandia National Laboratories (SNL), the University of New Mexico (UNM), and Agriculture Cooperative Development International (ACDI/VOCA). The EAEA, teaming with SNL, is conducting a Preliminary Safety Assessment (PSA) of an intermediate-depth borehole disposal in thick arid alluvium in Egypt based on experience with the U.S. Greater Confinement Disposal (GCD). Goldsim has been selected for the preliminary disposal system assessment for the Egyptian GCD Study. The results of the PSA will then be used to decide if Egypt desires to implement such a disposal system.« less

Developing a primary care patient measure of safety (PC PMOS): a modified Delphi process and face validity testing.

PubMed

Hernan, Andrea L; Giles, Sally J; O'Hara, Jane K; Fuller, Jeffrey; Johnson, Julie K; Dunbar, James A

2016-04-01

Patients are a valuable source of information about ways to prevent harm in primary care and are in a unique position to provide feedback about the factors that contribute to safety incidents. Unlike in the hospital setting, there are currently no tools that allow the systematic capture of this information from patients. The aim of this study was to develop a quantitative primary care patient measure of safety (PC PMOS). A two-stage approach was undertaken to develop questionnaire domains and items. Stage 1 involved a modified Delphi process. An expert panel reached consensus on domains and items based on three sources of information (validated hospital PMOS, previous research conducted by our study team and literature on threats to patient safety). Stage 2 involved testing the face validity of the questionnaire developed during stage 1 with patients and primary care staff using the 'think aloud' method. Following this process, the questionnaire was revised accordingly. The PC PMOS was received positively by both patients and staff during face validity testing. Barriers to completion included the length, relevance and clarity of questions. The final PC PMOS consisted of 50 items across 15 domains. The contributory factors to safety incidents centred on communication, access to care, patient-related factors, organisation and care planning, task performance and information flow. This is the first tool specifically designed for primary care settings, which allows patients to provide feedback about factors contributing to potential safety incidents. The PC PMOS provides a way for primary care organisations to learn about safety from the patient perspective and make service improvements with the aim of reducing harm in this setting. Future research will explore the reliability and construct validity of the PC PMOS. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Develop metrics of tire debris on Texas highways : technical report.

DOT National Transportation Integrated Search

2017-05-01

This research effort estimated the amount, characteristics, costs, and safety implications of tire debris on Texas highways. The metrics developed by this research are based on several sources of data, including a statewide survey of debris removal p...

The patient safety climate in healthcare organizations (PSCHO) survey: Short-form development.

PubMed

Benzer, Justin K; Meterko, Mark; Singer, Sara J

2017-08-01

Measures of safety climate are increasingly used to guide safety improvement initiatives. However, cost and respondent burden may limit the use of safety climate surveys. The purpose of this study was to develop a 15- to 20-item safety climate survey based on the Patient Safety Climate in Healthcare Organizations survey, a well-validated 38-item measure of safety climate. The Patient Safety Climate in Healthcare Organizations was administered to all senior managers, all physicians, and a 10% random sample of all other hospital personnel in 69 private sector hospitals and 30 Veterans Health Administration hospitals. Both samples were randomly divided into a derivation sample to identify a short-form subset and a confirmation sample to assess the psychometric properties of the proposed short form. The short form consists of 15 items represented 3 overarching domains in the long-form scale-organization, work unit, and interpersonal. The proposed short form efficiently captures 3 important sources of variance in safety climate: organizational, work-unit, and interpersonal. The short-form development process was a practical method that can be applied to other safety climate surveys. This safety climate short form may increase response rates in studies that involve busy clinicians or repeated measures. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

Collaboration and Commitment to Sealed Source Safety, Security, and Disposition - 13627

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jennison, Meaghan; Martin, David W.

2013-07-01

EnergySolutions, the Division of Radiation Control at the Utah Department of Environmental Quality (UDEQ), the Conference of Radiation Control Program Directors (CRCPD), and the Department of Energy's Global Threat Reduction Initiative (GTRI) are collaborating on a truly innovative effort to expand opportunities for cost-effective sealed source disposal. These entities have developed a first-of-its-kind initiative to dispose of certain sealed sources at the EnergySolutions disposal facility near Clive, Utah, which normally cannot accept sealed sources of any type. This creative and collaborative effort to improve radiation health, safety, and security exemplifies the spirit and commitment represented by the Richard S. Hodes,more » M.D. Honor Lecture Award, which is presented annually at the Waste Management Symposia by the Southeast Compact Commission to encourage environmental professionals and political leaders to develop innovative approaches to waste management in the United States. The participants in the collaborative initiative are honored to receive special recognition for their efforts thus far. They also recognize that the hard work remains to be done. (authors)« less

The research of distributed interactive simulation based on HLA in coal mine industry inherent safety

NASA Astrophysics Data System (ADS)

Dou, Zhi-Wu

2010-08-01

To solve the inherent safety problem puzzling the coal mining industry, analyzing the characteristic and the application of distributed interactive simulation based on high level architecture (DIS/HLA), a new method is proposed for developing coal mining industry inherent safety distributed interactive simulation adopting HLA technology. Researching the function and structure of the system, a simple coal mining industry inherent safety is modeled with HLA, the FOM and SOM are developed, and the math models are suggested. The results of the instance research show that HLA plays an important role in developing distributed interactive simulation of complicated distributed system and the method is valid to solve the problem puzzling coal mining industry. To the coal mining industry, the conclusions show that the simulation system with HLA plays an important role to identify the source of hazard, to make the measure for accident, and to improve the level of management.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dowla, Farid U.

Subsurface sensors that employ radioisotopes, such 241Am-Be and 137Cs, for reservoir characterization must be tracked for safety and security reasons. Other radiological sources are also widely used in medicine. The radiological source containers, in both applications, are small, mobile and used widely worldwide. The nuclear sources pose radiological dispersal device (RDD) security risks. Security concerns with the industrial use of radionuclide sources is in fact quite high as it is estimated that each year hundreds of sealed sources go missing, either lost or stolen. Risk mitigation efforts include enhanced regulations, source-use guidelines, research and development on electronic tracking of sources.more » This report summarizes the major elements of the requirements and operational concepts of nuclear sources with the goal of developing automated electronic tagging and locating systems.« less

Borehole Disposal and the Cradle-To-Grave Management Program for Radioactive Sealed Sources in Egypt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cochran, J.R.; Carson, S.D.; El-Adham, K.

2006-07-01

The Integrated Management Program for Radioactive Sealed Sources (IMPRSS) is greatly improving the management of radioactive sealed sources (RSSs) in Egypt. When completed, IMPRSS will protect the people and the environment from another radioactive incident. The Government of Egypt and Sandia National Laboratories are collaboratively implementing IMPRSS. The integrated activities are divided into three broad areas: the safe management of RSSs in-use, the safe management of unwanted RSSs, and crosscutting infrastructure. Taken together, these work elements comprise a cradle-to-grave program. To ensure sustainability, the IMPRSS emphasizes such activities as human capacity development through technology transfer and training, and development ofmore » a disposal facility. As a key step in the development of a disposal facility, IMPRSS is conducting a safety assessment for intermediate-depth borehole disposal in thick arid alluvium in Egypt based on experience with the U.S.'s Greater Confinement Disposal boreholes. This safety assessment of borehole disposal is being supported by the International Atomic Energy Agency (IAEA) through an IAEA Technical Cooperation Project. (authors)« less

Big data in food safety: An overview.

PubMed

Marvin, Hans J P; Janssen, Esmée M; Bouzembrak, Yamine; Hendriksen, Peter J M; Staats, Martijn

2017-07-24

Technology is now being developed that is able to handle vast amounts of structured and unstructured data from diverse sources and origins. These technologies are often referred to as big data, and open new areas of research and applications that will have an increasing impact in all sectors of our society. In this paper we assessed to which extent big data is being applied in the food safety domain and identified several promising trends. In several parts of the world, governments stimulate the publication on internet of all data generated in public funded research projects. This policy opens new opportunities for stakeholders dealing with food safety to address issues which were not possible before. Application of mobile phones as detection devices for food safety and the use of social media as early warning of food safety problems are a few examples of the new developments that are possible due to big data.

Development of a check sheet for collecting information necessary for occupational safety and health activities and building relevant systems in overseas business places.

PubMed

Kajiki, Shigeyuki; Kobayashi, Yuichi; Uehara, Masamichi; Nakanishi, Shigemoto; Mori, Koji

2016-06-07

This study aimed to develop an information gathering check sheet to efficiently collect information necessary for Japanese companies to build global occupational safety and health management systems in overseas business places. The study group consisted of 2 researchers with occupational physician careers in a foreign-affiliated company in Japan and 3 supervising occupational physicians who were engaged in occupational safety and health activities in overseas business places. After investigating information and sources of information necessary for implementing occupational safety and health activities and building relevant systems, we conducted information acquisition using an information gathering check sheet in the field, by visiting 10 regions in 5 countries (first phase). The accuracy of the information acquired and the appropriateness of the information sources were then verified in study group meetings to improve the information gathering check sheet. Next, the improved information gathering check sheet was used in another setting (3 regions in 1 country) to confirm its efficacy (second phase), and the information gathering check sheet was thereby completed. The information gathering check sheet was composed of 9 major items (basic information on the local business place, safety and health overview, safety and health systems, safety and health staff, planning/implementation/evaluation/improvement, safety and health activities, laws and administrative organs, local medical care systems and public health, and medical support for resident personnel) and 61 medium items. We relied on the following eight information sources: the internet, company (local business place and head office in Japan), embassy/consulate, ISO certification body, university or other educational institutions, and medical institutions (aimed at Japanese people or at local workers). Through multiple study group meetings and a two-phased field survey (13 regions in 6 countries), an information gathering check sheet was completed. We confirmed the possibility that this check sheet would enable the user to obtain necessary information when expanding safety and health activities in a country or region that is new to the user. It is necessary in the future to evaluate safety and health systems and activities using this information gathering check sheet in a local business place in any country in which a Japanese business will be established, and to verify the efficacy of the check sheet by conducting model programs to test specific approaches.

Automation for System Safety Analysis

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Fleming, Land; Throop, David; Thronesbery, Carroll; Flores, Joshua; Bennett, Ted; Wennberg, Paul

2009-01-01

This presentation describes work to integrate a set of tools to support early model-based analysis of failures and hazards due to system-software interactions. The tools perform and assist analysts in the following tasks: 1) extract model parts from text for architecture and safety/hazard models; 2) combine the parts with library information to develop the models for visualization and analysis; 3) perform graph analysis and simulation to identify and evaluate possible paths from hazard sources to vulnerable entities and functions, in nominal and anomalous system-software configurations and scenarios; and 4) identify resulting candidate scenarios for software integration testing. There has been significant technical progress in model extraction from Orion program text sources, architecture model derivation (components and connections) and documentation of extraction sources. Models have been derived from Internal Interface Requirements Documents (IIRDs) and FMEA documents. Linguistic text processing is used to extract model parts and relationships, and the Aerospace Ontology also aids automated model development from the extracted information. Visualizations of these models assist analysts in requirements overview and in checking consistency and completeness.

Automating the Generation of Heterogeneous Aviation Safety Cases

NASA Technical Reports Server (NTRS)

Denney, Ewen W.; Pai, Ganesh J.; Pohl, Josef M.

2012-01-01

A safety case is a structured argument, supported by a body of evidence, which provides a convincing and valid justification that a system is acceptably safe for a given application in a given operating environment. This report describes the development of a fragment of a preliminary safety case for the Swift Unmanned Aircraft System. The construction of the safety case fragment consists of two parts: a manually constructed system-level case, and an automatically constructed lower-level case, generated from formal proof of safety-relevant correctness properties. We provide a detailed discussion of the safety considerations for the target system, emphasizing the heterogeneity of sources of safety-relevant information, and use a hazard analysis to derive safety requirements, including formal requirements. We evaluate the safety case using three classes of metrics for measuring degrees of coverage, automation, and understandability. We then present our preliminary conclusions and make suggestions for future work.

Controlling hazardous energy sources (lockout/tagout)

NASA Technical Reports Server (NTRS)

Dominguez, Manuel B.

1991-01-01

The minimum requirements as established by the Occupational Safety and Health Administration (OSHA) standard 29 CFR 1910.147 are discussed for preventing the unexpected operation of equipment or release of energy which could cause injury to personnel, damage to equipment, harm to the environment, or loss or compromise of test data. Safety requirements both for government and contractor personnel are explained for potentially hazardous energy sources during work operations at LeRC (Cleveland and Plum Brook Stations). Basic rules are presented to ensure protection against harmful exposures, and baseline implementation requirements are discussed from which detailed lockout/tagout procedures can be developed for individual equipment items. Examples of energy sources covered by this document include electrical, pneumatic, mechanical, chemical, cryogenic, thermal, spring tension/compression suspended or moving loads, and other potentially hazardous sources. Activities covered by this standard include, but are not limited to, construction, maintenance, installation, calibration, inspection, cleaning, or repair.

Controlling hazardous energy sources (lockout/tagout)

NASA Astrophysics Data System (ADS)

Dominguez, Manuel B.

1991-10-01

The minimum requirements as established by the Occupational Safety and Health Administration (OSHA) standard 29 CFR 1910.147 are discussed for preventing the unexpected operation of equipment or release of energy which could cause injury to personnel, damage to equipment, harm to the environment, or loss or compromise of test data. Safety requirements both for government and contractor personnel are explained for potentially hazardous energy sources during work operations at LeRC (Cleveland and Plum Brook Stations). Basic rules are presented to ensure protection against harmful exposures, and baseline implementation requirements are discussed from which detailed lockout/tagout procedures can be developed for individual equipment items. Examples of energy sources covered by this document include electrical, pneumatic, mechanical, chemical, cryogenic, thermal, spring tension/compression suspended or moving loads, and other potentially hazardous sources. Activities covered by this standard include, but are not limited to, construction, maintenance, installation, calibration, inspection, cleaning, or repair.

Preparation of alpha sources using magnetohydrodynamic electrodeposition for radionuclide metrology.

PubMed

Panta, Yogendra M; Farmer, Dennis E; Johnson, Paula; Cheney, Marcos A; Qian, Shizhi

2010-02-01

Expanded use of nuclear fuel as an energy resource and terrorist threats to public safety clearly require the development of new state-of-the-art technologies and improvement of safety measures to minimize the exposure of people to radiation and the accidental release of radiation into the environment. The precision in radionuclide metrology is currently limited by the source quality rather than the detector performance. Electrodeposition is a commonly used technique to prepare massless radioactive sources. Unfortunately, the radioactive sources prepared by the conventional electrodeposition method produce poor resolution in alpha spectrometric measurements. Preparing radioactive sources with better resolution and higher yield in the alpha spectrometric range by integrating magnetohydrodynamic convection with the conventional electrodeposition technique was proposed and tested by preparing mixed alpha sources containing uranium isotopes ((238)U, (234)U), plutonium ((239)Pu), and americium ((241)Am) for alpha spectrometric determination. The effects of various parameters such as magnetic flux density, deposition current and time, and pH of the sample solution on the formed massless radioactive sources were also experimentally investigated. Copyright 2009 Elsevier Inc. All rights reserved.

Evaluation and Countermeasures on sustainable development of nickel resources in China

NASA Astrophysics Data System (ADS)

Lin, Zhifeng

2017-08-01

Nickel is an important strategic resource in China. With the gradual reduction of nickel re-sources and the increasing competition of the global mineral resources market, the safety of nickel resources in China has been seriously threatened. Therefore, it is very important to evaluate the sustainable develop-ment of nickel resources in China and put forward the corresponding countermeasures. In this paper, the concept and research situation of sustainable development are analyzed. Based on the specific development of nickel resources in China, this paper uses AHP to evaluate the safety of nickel resources in china. Finally, it puts forward the concrete measures to implement the sustainable development strategy of nickel resources in China.

Wireless Fluid-Level Sensors for Harsh Environments

NASA Technical Reports Server (NTRS)

Woodward, Stanley E.

2009-01-01

Magnetic-field-response sensors have been developed for use in measuring levels of fluids under extreme conditions. The sensors work without wire connections or direct physical contact with power sources, microprocessors, data-acquisition equipment, or electrical circuitry. For fuel-level sensors, the absence of wire connections offers an important safety advantage in elimination of potential ignition sources.

Potential revenue sources for Virginia's transportation safety programs : review of Virginia's revenue sources and a survey of other states : final report.

DOT National Transportation Integrated Search

1992-01-01

Fearful that inflation and the gradual erosion of federal support for highway safety programs were undermining Virginia's historic position of national leadership in highway safety; management directed a study of potential sources of new revenue for ...

Nuclear Criticality Safety Data Book

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollenbach, D. F.

The objective of this document is to support the revision of criticality safety process studies (CSPSs) for the Uranium Processing Facility (UPF) at the Y-12 National Security Complex (Y-12). This design analysis and calculation (DAC) document contains development and justification for generic inputs typically used in Nuclear Criticality Safety (NCS) DACs to model both normal and abnormal conditions of processes at UPF to support CSPSs. This will provide consistency between NCS DACs and efficiency in preparation and review of DACs, as frequently used data are provided in one reference source.

Safety systems in gamma irradiation facilities.

PubMed

Drndarevic, V

1997-08-01

A new electronic device has been developed to guard against individuals gaining entry through the product entry and exit ports into our irradiation facility for industrial sterilization. This device uses the output from electronic sensors and pressure mats to assure that only the transport cabins may pass through these ports. Any intention of personnel trespassing is detected, the process is stopped by the safety system, and the source is placed in safe position. Owing to a simple construction, the new device enables reliable operation, is inexpensive, easy to implement, and improves the existing safety systems.

Analysis on Dangerous Source of Large Safety Accident in Storage Tank Area

NASA Astrophysics Data System (ADS)

Wang, Tong; Li, Ying; Xie, Tiansheng; Liu, Yu; Zhu, Xueyuan

2018-01-01

The difference between a large safety accident and a general accident is that the consequences of a large safety accident are particularly serious. To study the tank area which factors directly or indirectly lead to the occurrence of large-sized safety accidents. According to the three kinds of hazard source theory and the consequence cause analysis of the super safety accident, this paper analyzes the dangerous source of the super safety accident in the tank area from four aspects, such as energy source, large-sized safety accident reason, management missing, environmental impact Based on the analysis of three kinds of hazard sources and environmental analysis to derive the main risk factors and the AHP evaluation model is established, and after rigorous and scientific calculation, the weights of the related factors in four kinds of risk factors and each type of risk factors are obtained. The result of analytic hierarchy process shows that management reasons is the most important one, and then the environmental factors and the direct cause and Energy source. It should be noted that although the direct cause is relatively low overall importance, the direct cause of Failure of emergency measures and Failure of prevention and control facilities in greater weight.

23 CFR 924.13 - Evaluation.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Ensure the accuracy and currency of the safety data; (ii) Identify factors that affect the priority of...(a)(1) shall be used: (1) For developing basic source data in the planning process in accordance with...

Safety and Environment aspects of Tokamak- type Fusion Power Reactor- An Overview

NASA Astrophysics Data System (ADS)

Doshi, Bharat; Reddy, D. Chenna

2017-04-01

Naturally occurring thermonuclear fusion reaction (of light atoms to form a heavier nucleus) in the sun and every star in the universe, releases incredible amounts of energy. Demonstrating the controlled and sustained reaction of deuterium-tritium plasma should enable the development of fusion as an energy source here on Earth. The promising fusion power reactors could be operated on the deuterium-tritium fuel cycle with fuel self-sufficiency. The potential impact of fusion power on the environment and the possible risks associated with operating large-scale fusion power plants is being studied by different countries. The results show that fusion can be a very safe and sustainable energy source. A fusion power plant possesses not only intrinsic advantages with respect to safety compared to other sources of energy, but also a negligible long term impact on the environment provided certain precautions are taken in its design. One of the important considerations is in the selection of low activation structural materials for reactor vessel. Selection of the materials for first wall and breeding blanket components is also important from safety issues. It is possible to fully benefit from the advantages of fusion energy if safety and environmental concerns are taken into account when considering the conceptual studies of a reactor design. The significant safety hazards are due to the tritium inventory and energetic neutron fluence induced activity in the reactor vessel, first wall components, blanket system etc. The potential of release of radioactivity under operational and accident conditions needs attention while designing the fusion reactor. Appropriate safety analysis for the quantification of the risk shall be done following different methods such as FFMEA (Functional Failure Modes and Effects Analysis) and HAZOP (Hazards and operability). Level of safety and safety classification such as nuclear safety and non-nuclear safety is very important for the FPR (Fusion Power Reactor). This paper describes an overview of safety and environmental merits of fusion power reactor, issues and design considerations and need for R&D on safety and environmental aspects of Tokamak type fusion reactor.

Fire Safety Educational Material.

ERIC Educational Resources Information Center

Cohn, Bert M.

The state of the art of home fire safety educational material was reviewed to prepare a bibliography of home fire safety educational materials available from major public and private sources. Sources contacted were: National Fire Protection Association, National Safety Council, U.S. government agencies, private publishers and film distributors,…

Selecting indicators for patient safety at the health system level in OECD countries.

PubMed

McLoughlin, Vivienne; Millar, John; Mattke, Soeren; Franca, Margarida; Jonsson, Pia Maria; Somekh, David; Bates, David

2006-09-01

Concerns about patient safety have arisen with growing documentation of the extent and nature of harm. Yet there are no robust and meaningful data that can be used internationally to assess the extent of the problem and considerable methodological difficulties. This article describes a project undertaken as part of the Organization for Economic Cooperation and Development (OECD) Quality Indicator Project, which aimed at developing an initial set of patient safety indicators. Patient safety indicators from OECD countries were identified and then rated against three principal criteria: importance to patient safety, scientific soundness, and potential feasibility. Although some countries are developing multi-source monitoring systems, these are not yet mature enough for international exchange. This project reviewed routine data collections as a starting point. Of an initial set of 59 candidate indicators identified, 21 were selected which cover known areas of harm to patients. This project is an important initial step towards defining a usable set of patient safety indicators that will allow comparisons to be made internationally and will support mutual learning and quality improvement in health care. Measures of harm should be complemented over time with measures of effective improvement factors.

The development of regulatory expectations for computer-based safety systems for the UK nuclear programme

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, P. J.; Westwood, R.N; Mark, R. T.

2006-07-01

The Nuclear Installations Inspectorate (NII) of the UK's Health and Safety Executive (HSE) has completed a review of their Safety Assessment Principles (SAPs) for Nuclear Installations recently. During the period of the SAPs review in 2004-2005 the designers of future UK naval reactor plant were optioneering the control and protection systems that might be implemented. Because there was insufficient regulatory guidance available in the naval sector to support this activity the Defence Nuclear Safety Regulator (DNSR) invited the NII to collaborate with the production of a guidance document that provides clarity of regulatory expectations for the production of safety casesmore » for computer based safety systems. A key part of producing regulatory expectations was identifying the relevant extant standards and sector guidance that reflect good practice. The three principal sources of such good practice were: IAEA Safety Guide NS-G-1.1 (Software for Computer Based Systems Important to Safety in Nuclear Power Plants), European Commission consensus document (Common Position of European Nuclear Regulators for the Licensing of Safety Critical Software for Nuclear Reactors) and IEC nuclear sector standards such as IEC60880. A common understanding has been achieved between the NII and DNSR and regulatory guidance developed which will be used by both NII and DNSR in the assessment of computer-based safety systems and in the further development of more detailed joint technical assessment guidance for both regulatory organisations. (authors)« less

Measurement and standardization of eye safety for optical radiation of LED products

NASA Astrophysics Data System (ADS)

Mou, Tongsheng; Peng, Zhenjian

2013-06-01

The blue light hazard (BLH) to human eye's retina is now a new issue emerging in applications of artificial light sources. Especially for solid state lighting sources based on the blue chip-LED(GaN), the photons with their energy more than 2.4 eV show photochemical effects on the retina significantly, raising damage both in photoreceptors and retinal pigment epithelium. The photobiological safety of artificial light sources emitting optical radiation has gained more and more attention worldwide and addressed by international standards IEC 62471-2006(CIE S009/E: 2002). Meanwhile, it is involved in IEC safety specifications of LED lighting products and covered by European Directive 2006/25/EC on the minimum health and safety requirements regarding the exposure of the workers to artificial optical radiation. In practical applications of the safety standards, the measuring methods of optical radiation from LED products to eyes are important in establishment of executable methods in the industry. In 2011, a new project to develop the international standard of IEC TR62471-4,that is "Measuring methods of optical radiation related to photobiological safety", was approved and are now under way. This paper presents the concerned methods for the assessment of optical radiation hazards in the standards. Furthermore, a retina radiance meter simulating eye's optical geometry is also described, which is a potential tool for blue light hazard assessment of retinal exposure to optical radiation. The spectroradiometric method integrated with charge-coupled device(CCD) imaging system is introduced to provide more reliable results.

Safety in numbers: the development of Leapfrog's composite patient safety score for U.S. hospitals.

PubMed

Austin, J Matthew; D'Andrea, Guy; Birkmeyer, John D; Leape, Lucian L; Milstein, Arnold; Pronovost, Peter J; Romano, Patrick S; Singer, Sara J; Vogus, Timothy J; Wachter, Robert M

2014-03-01

To develop a composite patient safety score that provides patients, health-care providers, and health-care purchasers with a standardized method to evaluate patient safety in general acute care hospitals in the United States. The Leapfrog Group sought guidance from a panel of national patient safety experts to develop the composite score. Candidate patient safety performance measures for inclusion in the score were identified from publicly reported national sources. Hospital performance on each measure was converted into a "z-score" and then aggregated using measure-specific weights. A reference mean score was set at 3, with scores interpreted in terms of standard deviations above or below the mean, with above reflecting better than average performance. Twenty-six measures were included in the score. The mean composite score for 2652 general acute care hospitals in the United States was 2.97 (range by hospital, 0.46-3.94). Safety scores were slightly lower for hospitals that were publicly owned, rural in location, or had a larger percentage of patients with Medicaid as their primary insurance. The Leapfrog patient safety composite provides a standardized method to evaluate patient safety in general acute care hospitals in the United States. While constrained by available data and publicly reported scores on patient safety measures, the composite score reflects the best available evidence regarding a hospital's efforts and outcomes in patient safety. Additional analyses are needed, but the score did not seem to have a strong bias against hospitals with specific characteristics. The composite score will continue to be refined over time as measures of patient safety evolve.

Development of unauthorized airborne emission source identification procedure

NASA Astrophysics Data System (ADS)

Shtripling, L. O.; Bazhenov, V. V.; Varakina, N. S.; Kupriyanova, N. P.

2018-01-01

The paper presents the procedure for searching sources of unauthorized airborne emissions. To make reasonable regulation decisions on airborne pollutant emissions and to ensure the environmental safety of population, the procedure provides for the determination of a pollutant mass emission value from the source being the cause of high pollution level and the search of a previously unrecognized contamination source in a specified area. To determine the true value of mass emission from the source, the minimum of the mean-root-square mismatch criterion between the computed and measured pollutant concentration in the given location is used.

Developing and testing a theoretical model linking work-family conflict to employee safety.

PubMed

Cullen, Jennifer C; Hammer, Leslie B

2007-07-01

Despite work-family conflict being recognized as a source of stress, no published research to our knowledge has considered how it negatively affects workplace safety. A theoretical model linking strain-based work-family conflict and employee safety was tested with 243 health care workers. Within this model, work-family conflict is conceptualized as a workplace hazard. As expected, strong work performance norms and high work overload were associated with higher work-family conflict; increased family-to-work conflict was associated with decreased compliance with safety rules and less willingness to participate in discretionary safety meetings. Work-to-family conflict, however, was not associated with safety. These findings underscore the importance of work redesign strategies that consider work performance norms and work-family conflict for expecting a return on investment in terms of a safer workplace. Copyright 2007 APA

Safety with surgical lasers.

PubMed

McKenzie, A L

1984-01-01

As the sales of surgical lasers continue to grow, the problem of laser safety in hospitals becomes increasingly more urgent. This article considers both the principles and the practice of laser safety, and indicates how safety codes should be organized within a hospital. Eye safety is of paramount importance, and the effects of different wavelengths of laser radiation on the eye are described, both for intrabeam and extended-source exposure. An account is given of the concept of Maximum Permissible Exposure (MPE) and how it depends upon wavelength and exposure duration. The standard laser classification is developed in relation to MPE. The use of laser protective eyewear is discussed for the surgeon, other theatre staff and the patient. Finally, the role of the Laser Protection Supervisor and of the Laser Protection Adviser are explained in the context of establishing a local laser safety code.

Sources of Safety Data and Statistical Strategies for Design and Analysis: Postmarket Surveillance.

PubMed

Izem, Rima; Sanchez-Kam, Matilde; Ma, Haijun; Zink, Richard; Zhao, Yueqin

2018-03-01

Safety data are continuously evaluated throughout the life cycle of a medical product to accurately assess and characterize the risks associated with the product. The knowledge about a medical product's safety profile continually evolves as safety data accumulate. This paper discusses data sources and analysis considerations for safety signal detection after a medical product is approved for marketing. This manuscript is the second in a series of papers from the American Statistical Association Biopharmaceutical Section Safety Working Group. We share our recommendations for the statistical and graphical methodologies necessary to appropriately analyze, report, and interpret safety outcomes, and we discuss the advantages and disadvantages of safety data obtained from passive postmarketing surveillance systems compared to other sources. Signal detection has traditionally relied on spontaneous reporting databases that have been available worldwide for decades. However, current regulatory guidelines and ease of reporting have increased the size of these databases exponentially over the last few years. With such large databases, data-mining tools using disproportionality analysis and helpful graphics are often used to detect potential signals. Although the data sources have many limitations, analyses of these data have been successful at identifying safety signals postmarketing. Experience analyzing these dynamic data is useful in understanding the potential and limitations of analyses with new data sources such as social media, claims, or electronic medical records data.

The design and implementation of hydrographical information management system (HIMS)

NASA Astrophysics Data System (ADS)

Sui, Haigang; Hua, Li; Wang, Qi; Zhang, Anming

2005-10-01

With the development of hydrographical work and information techniques, the large variety of hydrographical information including electronic charts, documents and other materials are widely used, and the traditional management mode and techniques are unsuitable for the development of the Chinese Marine Safety Administration Bureau (CMSAB). How to manage all kinds of hydrographical information has become an important and urgent problem. A lot of advanced techniques including GIS, RS, spatial database management and VR techniques are introduced for solving these problems. Some design principles and key techniques of the HIMS including the mixed mode base on B/S, C/S and stand-alone computer mode, multi-source & multi-scale data organization and management, multi-source data integration and diverse visualization of digital chart, efficient security control strategies are illustrated in detail. Based on the above ideas and strategies, an integrated system named Hydrographical Information Management System (HIMS) was developed. And the HIMS has been applied in the Shanghai Marine Safety Administration Bureau and obtained good evaluation.

Information Extraction for System-Software Safety Analysis: Calendar Year 2008 Year-End Report

NASA Technical Reports Server (NTRS)

Malin, Jane T.

2009-01-01

This annual report describes work to integrate a set of tools to support early model-based analysis of failures and hazards due to system-software interactions. The tools perform and assist analysts in the following tasks: 1) extract model parts from text for architecture and safety/hazard models; 2) combine the parts with library information to develop the models for visualization and analysis; 3) perform graph analysis and simulation to identify and evaluate possible paths from hazard sources to vulnerable entities and functions, in nominal and anomalous system-software configurations and scenarios; and 4) identify resulting candidate scenarios for software integration testing. There has been significant technical progress in model extraction from Orion program text sources, architecture model derivation (components and connections) and documentation of extraction sources. Models have been derived from Internal Interface Requirements Documents (IIRDs) and FMEA documents. Linguistic text processing is used to extract model parts and relationships, and the Aerospace Ontology also aids automated model development from the extracted information. Visualizations of these models assist analysts in requirements overview and in checking consistency and completeness.

Future challenges to microbial food safety.

PubMed

Havelaar, Arie H; Brul, Stanley; de Jong, Aarieke; de Jonge, Rob; Zwietering, Marcel H; Ter Kuile, Benno H

2010-05-30

Despite significant efforts by all parties involved, there is still a considerable burden of foodborne illness, in which micro-organisms play a prominent role. Microbes can enter the food chain at different steps, are highly versatile and can adapt to the environment allowing survival, growth and production of toxic compounds. This sets them apart from chemical agents and thus their study from food toxicology. We summarize the discussions of a conference organized by the Dutch Food and Consumer Products Safety Authority and the European Food Safety Authority. The goal of the conference was to discuss new challenges to food safety that are caused by micro-organisms as well as strategies and methodologies to counter these. Management of food safety is based on generally accepted principles of Hazard Analysis Critical Control Points and of Good Manufacturing Practices. However, a more pro-active, science-based approach is required, starting with the ability to predict where problems might arise by applying the risk analysis framework. Developments that may influence food safety in the future occur on different scales (from global to molecular) and in different time frames (from decades to less than a minute). This necessitates development of new risk assessment approaches, taking the impact of different drivers of change into account. We provide an overview of drivers that may affect food safety and their potential impact on foodborne pathogens and human disease risks. We conclude that many drivers may result in increased food safety risks, requiring active governmental policy setting and anticipation by food industries whereas other drivers may decrease food safety risks. Monitoring of contamination in the food chain, combined with surveillance of human illness and epidemiological investigations of outbreaks and sporadic cases continue to be important sources of information. New approaches in human illness surveillance include the use of molecular markers for improved outbreak detection and source attribution, sero-epidemiology and disease burden estimation. Current developments in molecular techniques make it possible to rapidly assemble information on the genome of various isolates of microbial species of concern. Such information can be used to develop new tracking and tracing methods, and to investigate the behavior of micro-organisms under environmentally relevant stress conditions. These novel tools and insight need to be applied to objectives for food safety strategies, as well as to models that predict microbial behavior. In addition, the increasing complexity of the global food systems necessitates improved communication between all parties involved: scientists, risk assessors and risk managers, as well as consumers. Copyright 2009 Elsevier B.V. All rights reserved.

Proposal of the confinement strategy of radioactive and hazardous materials for the European DEMO

NASA Astrophysics Data System (ADS)

Jin, X. Z.; Carloni, D.; Stieglitz, R.; Ciattaglia, S.; Johnston, J.; Taylor, N.

2017-04-01

Confinement of radioactive and hazardous materials is one of the fundamental safety functions in a nuclear fusion facility, which has to limit the mobilisation and dispersion of sources and hazards during normal, abnormal and accidental situations. In a first step energy sources and radioactive source have been assessed for a conceptual DEMO configuration. The confinement study for the European DEMO has been investigated for the main systems at the plant breakdown structure (PBS) level 1 taking a bottom-up approach. Based on the identification of the systems possessing a confinement function, a confinement strategy has been proposed, in which DEMO confinement systems and barriers have been defined. In addition, confinement for the maintenance has been issued as well. The assignment of confinement barriers to the identified sources under abnormal and accidental conditions has been performed, and the DEMO main safety systems have been proposed as well. Finally, confinement related open issues have been pointed out, which need to be resolved in parallel with DEMO development.

Savannah River Site generic data base development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanton, C.H.; Eide, S.A.

This report describes the results of a project to improve the generic component failure data base for the Savannah River Site (SRS). A representative list of components and failure modes for SRS risk models was generated by reviewing existing safety analyses and component failure data bases and from suggestions from SRS safety analysts. Then sources of data or failure rate estimates were identified and reviewed for applicability. A major source of information was the Nuclear Computerized Library for Assessing Reactor Reliability, or NUCLARR. This source includes an extensive collection of failure data and failure rate estimates for commercial nuclear powermore » plants. A recent Idaho National Engineering Laboratory report on failure data from the Idaho Chemical Processing Plant was also reviewed. From these and other recent sources, failure data and failure rate estimates were collected for the components and failure modes of interest. This information was aggregated to obtain a recommended generic failure rate distribution (mean and error factor) for each component failure mode.« less

Power sources for autonomous underwater vehicles

NASA Astrophysics Data System (ADS)

Hasvold, Øistein; Størkersen, Nils J.; Forseth, Sissel; Lian, Torleif

The paper addresses the general requirements for power sources for AUVs, including battery and semi-fuel cell design and safety considerations. The focus is on the last AUV in the HUGIN family: the HUGIN 1000 mine reconnaissance system. For this AUV, FFI recently developed a pressure tolerant lithium ion battery based on commercially available polymer cells. The Royal Norwegian Navy has been operating HUGIN 1000 since February 2004.

A Novel Series Connected Batteries State of High Voltage Safety Monitor System for Electric Vehicle Application

PubMed Central

Jiaxi, Qiang; Lin, Yang; Jianhui, He; Qisheng, Zhou

2013-01-01

Batteries, as the main or assistant power source of EV (Electric Vehicle), are usually connected in series with high voltage to improve the drivability and energy efficiency. Today, more and more batteries are connected in series with high voltage, if there is any fault in high voltage system (HVS), the consequence is serious and dangerous. Therefore, it is necessary to monitor the electric parameters of HVS to ensure the high voltage safety and protect personal safety. In this study, a high voltage safety monitor system is developed to solve this critical issue. Four key electric parameters including precharge, contact resistance, insulation resistance, and remaining capacity are monitored and analyzed based on the equivalent models presented in this study. The high voltage safety controller which integrates the equivalent models and control strategy is developed. By the help of hardware-in-loop system, the equivalent models integrated in the high voltage safety controller are validated, and the online electric parameters monitor strategy is analyzed and discussed. The test results indicate that the high voltage safety monitor system designed in this paper is suitable for EV application. PMID:24194677

A novel series connected batteries state of high voltage safety monitor system for electric vehicle application.

PubMed

Jiaxi, Qiang; Lin, Yang; Jianhui, He; Qisheng, Zhou

2013-01-01

Batteries, as the main or assistant power source of EV (Electric Vehicle), are usually connected in series with high voltage to improve the drivability and energy efficiency. Today, more and more batteries are connected in series with high voltage, if there is any fault in high voltage system (HVS), the consequence is serious and dangerous. Therefore, it is necessary to monitor the electric parameters of HVS to ensure the high voltage safety and protect personal safety. In this study, a high voltage safety monitor system is developed to solve this critical issue. Four key electric parameters including precharge, contact resistance, insulation resistance, and remaining capacity are monitored and analyzed based on the equivalent models presented in this study. The high voltage safety controller which integrates the equivalent models and control strategy is developed. By the help of hardware-in-loop system, the equivalent models integrated in the high voltage safety controller are validated, and the online electric parameters monitor strategy is analyzed and discussed. The test results indicate that the high voltage safety monitor system designed in this paper is suitable for EV application.

MO-G-BRE-08: Taxonomy of Corrective Actions in Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutlief, S; Brown, D

2014-06-15

Purpose: Various causal taxonomies have been developed for healthcare incidents and for radiation therapy in particular. The causal analysis of incidents leads to corrective actions which can also be organized into a taxonomy. Such a corrective action classification system would provide information about the situational context, the action type, and the leverage of the action in order to detect patterns in the corrective actions frequently employed in radiation therapy. It would also provide practical guidance to the radiation therapy community for determining the appropriateness and potential effectiveness of proposed corrective actions. Materials: A review of causal analysis reports and correctivemore » action plans was conducted using the following sources: US NRC medical event reports, IAEA reports, ROSIS submissions, US Veterans Health Administration reports, and singleincident report sources. The corrective actions presented in the published sources were then mapped onto four corrective action taxonomy prototypes: role-based, safety-context-based, responsibility-based, and hierarchy of hazard control. The resulting corrective action taxonomy was then validated through use of the published sources. Results: The responsibility-based taxonomy and hierarchy of hazard taxonomy provided more intuitive and sensible categories than the role-based taxonomy or the safety-context taxonomy. The most frequent corrective actions were added safety barriers, training, process standardization, and development of a quality improvement program where one was lacking. Conclusion: Published corrective action statements in radiation therapy emphasize what to do more so than whom the recipient is or which process step is affected. The hierarchy of hazard taxonomy provides a suitable framework for radiation therapy and has the advantage of providing insight into the likelihood that a particular corrective action will mitigate the recurrence of the error it was meant to correct. This information would be useful to medical center administration, safety personnel, and regulators who must assess the projected efficacy of corrective actions. Derek Brown is a director of TreatSafely, LLC.« less

30 CFR 56.4500 - Heat sources.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Heat sources. 56.4500 Section 56.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 56.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 57.4500 - Heat sources.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Heat sources. 57.4500 Section 57.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 57.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 57.4500 - Heat sources.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Heat sources. 57.4500 Section 57.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 57.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 57.4500 - Heat sources.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Heat sources. 57.4500 Section 57.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 57.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 56.4500 - Heat sources.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Heat sources. 56.4500 Section 56.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 56.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 56.4500 - Heat sources.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Heat sources. 56.4500 Section 56.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 56.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 57.4500 - Heat sources.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Heat sources. 57.4500 Section 57.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 57.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 56.4500 - Heat sources.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Heat sources. 56.4500 Section 56.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 56.4500 Heat sources. Heat sources capable of producing combustion...

Aerostat-Lofted Instrument Platform and Sampling Method for Determination of Emissions from Open Area Sources

EPA Science Inventory

Sampling emissions from open area sources, particularly sources of open burning, is difficult due to fast dilution of emissions and safety concerns for personnel. Representative emission samples can be difficult to obtain with flaming and explosive sources since personnel safety ...

[Radiation safety of exploitation of radiation sources at the civil aviation airlines].

PubMed

Afanas'ev, R V; Zuev, V G; Berezin, G I; Sereda, V N; Zasiad'ko, A K

2004-01-01

Radiation risks from isotope-containing equipment, and ionizing and unused X-ray radiation sources are characterized and relevant normative documents with safety requirements to radiation sources installation, radiation safety of aircraft servicing and repair, hand luggage control and heavy luggage registration, personal protection items, system of radiation monitoring at airlines and aircraft works, and liability for breach of performance guidelines are cited.

Safety in the Chemical Laboratory--Safety Education for Chemistry Students: Hazard Control Starting at the Source.

ERIC Educational Resources Information Center

Zwaard, A. W.; And Others

1989-01-01

Presents a programed method that inventories and classifies hazards. 8iscusses the following topics: (1) student and hazard source, (2) elimination of the source, (3) adaptation of the source, (4) isolation of the source, (5) adjustment of the surroundings, (6) isolation of man, and (7) personal protective equipment. (MVL)

Guide for optimizing the effectiveness and the efficiency of roadway lighting.

DOT National Transportation Integrated Search

2012-06-01

The objective of the present project was to develop a simple guide for roadway lighting replacement : approaches using new light source technologies to maintain visibility for safety, while reducing energy use. : Several roadway types were evaluated:...

3 CFR 8716 - Proclamation 8716 of September 16, 2011. National Farm Safety and Health Week, 2011

Code of Federal Regulations, 2012 CFR

2012-01-01

... source of biofuels that will help lead us to energy independence. My Administration is working to speed the development of next-generation biofuels, and their production will benefit farmers, rural...

Workforce Perceptions of Hospital Safety Culture: Development and Validation of the Patient Safety Climate in Healthcare Organizations Survey

PubMed Central

Singer, Sara; Meterko, Mark; Baker, Laurence; Gaba, David; Falwell, Alyson; Rosen, Amy

2007-01-01

Objective To describe the development of an instrument for assessing workforce perceptions of hospital safety culture and to assess its reliability and validity. Data Sources/Study Setting Primary data collected between March 2004 and May 2005. Personnel from 105 U.S. hospitals completed a 38-item paper and pencil survey. We received 21,496 completed questionnaires, representing a 51 percent response rate. Study Design Based on review of existing safety climate surveys, we developed a list of key topics pertinent to maintaining a culture of safety in high-reliability organizations. We developed a draft questionnaire to address these topics and pilot tested it in four preliminary studies of hospital personnel. We modified the questionnaire based on experience and respondent feedback, and distributed the revised version to 42,249 hospital workers. Data Collection We randomly divided respondents into derivation and validation samples. We applied exploratory factor analysis to responses in the derivation sample. We used those results to create scales in the validation sample, which we subjected to multitrait analysis (MTA). Principal Findings We identified nine constructs, three organizational factors, two unit factors, three individual factors, and one additional factor. Constructs demonstrated substantial convergent and discriminant validity in the MTA. Cronbach's α coefficients ranged from 0.50 to 0.89. Conclusions It is possible to measure key salient features of hospital safety climate using a valid and reliable 38-item survey and appropriate hospital sample sizes. This instrument may be used in further studies to better understand the impact of safety climate on patient safety outcomes. PMID:17850530

Assessment of Superstructure Ice Protection as Applied to Offshore Oil Operations Safety: Ice Protection Technologies, Safety Enhancements, and Development Needs

DTIC Science & Technology

2009-04-01

companies and Web site own- ers to use their tables and figures. This report was prepared under the general supervision of Janet Hardy, Chief...through reports about the technologies, sales and engineering literature, Web sites, and patents. Information in some circumstances was available from...the technologies are proprietary, some information sources were limited to Web sites and open literature. 5. TRL: Technology Readiness Level (TRL

A Survey on Pharmacovigilance Activities in ASEAN and Selected Non-ASEAN Countries, and the Use of Quantitative Signal Detection Algorithms.

PubMed

Chan, Cheng Leng; Ang, Pei San; Li, Shu Chuen

2017-06-01

Most Countries have pharmacovigilance (PV) systems in place to monitor the safe use of health products. The process involves the detection and assessment of safety issues from various sources of information, communicating the risk to stakeholders and taking other relevant risk minimization measures. This study aimed to assess the PV status in Association of Southeast Asian Nation (ASEAN) countries, sources for postmarket safety monitoring, methods used for signal detection and the need for a quantitative signal detection algorithm (QSDA). Comparisons were conducted with centres outside ASEAN. A questionnaire was sent to all PV centres in ASEAN countries, as well as seven other countries, from November 2015 to June 2016. The questionnaire was designed to collect information on the status of PV, with a focus on the use of a QSDA. Data were collected from nine ASEAN countries and seven other countries. PV activities were conducted in all these countries, which were at different stages of development. In terms of adverse drug reaction (ADR) reports, the average number received per year ranged from 3 to 50,000 reports for ASEAN countries and from 7000 to 1,103,200 for non-ASEAN countries. Thirty-three percent of ASEAN countries utilized statistical methods to help detect signals from ADR reports compared with 100% in the other non-ASEAN countries. Eighty percent agreed that the development of a QSDA would help in drug signal detection. The main limitation identified was the lack of knowledge and/or lack of resources. Spontaneous ADR reports from healthcare professionals remains the most frequently used source for safety monitoring. The traditional method of case-by-case review of ADR reports prevailed for signal detection in ASEAN countries. As the reports continue to grow, the development of a QSDA would be useful in helping detect safety signals.

Large-scale road safety programmes in low- and middle-income countries: an opportunity to generate evidence.

PubMed

Hyder, Adnan A; Allen, Katharine A; Peters, David H; Chandran, Aruna; Bishai, David

2013-01-01

The growing burden of road traffic injuries, which kill over 1.2 million people yearly, falls mostly on low- and middle-income countries (LMICs). Despite this, evidence generation on the effectiveness of road safety interventions in LMIC settings remains scarce. This paper explores a scientific approach for evaluating road safety programmes in LMICs and introduces such a road safety multi-country initiative, the Road Safety in 10 Countries Project (RS-10). By building on existing evaluation frameworks, we develop a scientific approach for evaluating large-scale road safety programmes in LMIC settings. This also draws on '13 lessons' of large-scale programme evaluation: defining the evaluation scope; selecting study sites; maintaining objectivity; developing an impact model; utilising multiple data sources; using multiple analytic techniques; maximising external validity; ensuring an appropriate time frame; the importance of flexibility and a stepwise approach; continuous monitoring; providing feedback to implementers, policy-makers; promoting the uptake of evaluation results; and understanding evaluation costs. The use of relatively new approaches for evaluation of real-world programmes allows for the production of relevant knowledge. The RS-10 project affords an important opportunity to scientifically test these approaches for a real-world, large-scale road safety evaluation and generate new knowledge for the field of road safety.

Safety Surveillance of Traditional Chinese Medicine: Current and Future

PubMed Central

Liu, Shwu-Huey; Chuang, Wu-Chang; Lam, Wing; Jiang, Zaoli

2015-01-01

Herbal medicine, including traditional Chinese medicine, has been used for the prevention, treatment, and cure of disorders or diseases for centuries. In addition to being used directly as therapeutic agents, medicinal plants are also important sources for pharmacological drug research and development. With the increasing consumption of herbal products intended to promote better health, it is extremely important to assure the safety and quality of herbal preparations. However, under current regulation surveillance, herbal preparations may not meet expectations in safety, quality, and efficacy. The challenge is how to assure the safety and quality of herbal products for consumers. It is the responsibility of producers to minimize hazardous contamination and additives during cultivation, harvesting, handling, processing, storage, and distribution. This article reviews the current safety obstacles that have been involved in traditional Chinese herbal medicine preparations with examples of popular herbs. Approaches to improve the safety of traditional Chinese medicine are proposed. PMID:25647717

SAFEGUARD: An Assured Safety Net Technology for UAS

NASA Technical Reports Server (NTRS)

Dill, Evan T.; Young, Steven D.; Hayhurst, Kelly J.

2016-01-01

As demands increase to use unmanned aircraft systems (UAS) for a broad spectrum of commercial applications, regulatory authorities are examining how to safely integrate them without loss of safety or major disruption to existing airspace operations. This work addresses the development of the Safeguard system as an assured safety net technology for UAS. The Safeguard system monitors and enforces conformance to a set of rules defined prior to flight (e.g., geospatial stay-out or stay-in regions, speed limits, altitude limits). Safeguard operates independently of the UAS autopilot and is strategically designed in a way that can be realized by a small set of verifiable functions to simplify compliance with regulatory standards for commercial aircraft. A framework is described that decouples the system from any other devices on the UAS as well as introduces complementary positioning source(s) for applications that require integrity and availability beyond what the Global Positioning System (GPS) can provide. Additionally, the high level logic embedded within the software is presented, as well as the steps being taken toward verification and validation (V&V) of proper functionality. Next, an initial prototype implementation of the described system is disclosed. Lastly, future work including development, testing, and system V&V is summarized.

2011 Annual Criticality Safety Program Performance Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrea Hoffman

The 2011 review of the INL Criticality Safety Program has determined that the program is robust and effective. The review was prepared for, and fulfills Contract Data Requirements List (CDRL) item H.20, 'Annual Criticality Safety Program performance summary that includes the status of assessments, issues, corrective actions, infractions, requirements management, training, and programmatic support.' This performance summary addresses the status of these important elements of the INL Criticality Safety Program. Assessments - Assessments in 2011 were planned and scheduled. The scheduled assessments included a Criticality Safety Program Effectiveness Review, Criticality Control Area Inspections, a Protection of Controlled Unclassified Information Inspection,more » an Assessment of Criticality Safety SQA, and this management assessment of the Criticality Safety Program. All of the assessments were completed with the exception of the 'Effectiveness Review' for SSPSF, which was delayed due to emerging work. Although minor issues were identified in the assessments, no issues or combination of issues indicated that the INL Criticality Safety Program was ineffective. The identification of issues demonstrates the importance of an assessment program to the overall health and effectiveness of the INL Criticality Safety Program. Issues and Corrective Actions - There are relatively few criticality safety related issues in the Laboratory ICAMS system. Most were identified by Criticality Safety Program assessments. No issues indicate ineffectiveness in the INL Criticality Safety Program. All of the issues are being worked and there are no imminent criticality concerns. Infractions - There was one criticality safety related violation in 2011. On January 18, 2011, it was discovered that a fuel plate bundle in the Nuclear Materials Inspection and Storage (NMIS) facility exceeded the fissionable mass limit, resulting in a technical safety requirement (TSR) violation. The TSR limits fuel plate bundles to 1085 grams U-235, which is the maximum loading of an ATR fuel element. The overloaded fuel plate bundle contained 1097 grams U-235 and was assembled under an 1100 gram U-235 limit in 1982. In 2003, the limit was reduced to 1085 grams citing a new criticality safety evaluation for ATR fuel elements. The fuel plate bundle inventories were not checked for compliance prior to implementing the reduced limit. A subsequent review of the NMIS inventory did not identify further violations. Requirements Management - The INL Criticality Safety program is organized and well documented. The source requirements for the INL Criticality Safety Program are from 10 CFR 830.204, DOE Order 420.1B, Chapter III, 'Nuclear Criticality Safety,' ANSI/ANS 8-series Industry Standards, and DOE Standards. These source requirements are documented in LRD-18001, 'INL Criticality Safety Program Requirements Manual.' The majority of the criticality safety source requirements are contained in DOE Order 420.1B because it invokes all of the ANSI/ANS 8-Series Standards. DOE Order 420.1B also invokes several DOE Standards, including DOE-STD-3007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities.' DOE Order 420.1B contains requirements for DOE 'Heads of Field Elements' to approve the criticality safety program and specific elements of the program, namely, the qualification of criticality staff and the method for preparing criticality safety evaluations. This was accomplished by the approval of SAR-400, 'INL Standardized Nuclear Safety Basis Manual,' Chapter 6, 'Prevention of Inadvertent Criticality.' Chapter 6 of SAR-400 contains sufficient detail and/or reference to the specific DOE and contractor documents that adequately describe the INL Criticality Safety Program per the elements specified in DOE Order 420.1B. The Safety Evaluation Report for SAR-400 specifically recognizes that the approval of SAR-400 approves the INL Criticality Safety Program. No new source requirements were released in 2011. A revision to LRD-18001 is planned for 2012 to clarify design requirements for criticality alarms. Training - Criticality Safety Engineering has developed training and provides training for many employee positions, including fissionable material handlers, facility managers, criticality safety officers, firefighters, and criticality safety engineers. Criticality safety training at the INL is a program strength. A revision to the training module developed in 2010 to supplement MFC certified fissionable material handlers (operators) training was prepared and presented in August of 2011. This training, 'Applied Science of Criticality Safety,' builds upon existing training and gives operators a better understanding of how their criticality controls are derived. Improvements to 00INL189, 'INL Criticality Safety Principles' are planned for 2012 to strengthen fissionable material handler training.« less

Nuclear energy technology

NASA Technical Reports Server (NTRS)

Buden, David

1992-01-01

An overview of space nuclear energy technologies is presented. The development and characteristics of radioisotope thermoelectric generators (RTG's) and space nuclear power reactors are discussed. In addition, the policy and issues related to public safety and the use of nuclear power sources in space are addressed.

Revenue sources for financing transportation safety activities in Virginia : phase two, state sources.

DOT National Transportation Integrated Search

1980-01-01

Senate Bill 85, an action of the 1978 General Assembly, amended the Code of Virginia to provide, in part, that the Division of Highway Safety be succeeded by the newly created Department of Transportation Safety effective July 1, 1978. In its Declara...

What can patients tell us about the quality and safety of hospital care? Findings from a UK multicentre survey study.

PubMed

O'Hara, Jane K; Reynolds, Caroline; Moore, Sally; Armitage, Gerry; Sheard, Laura; Marsh, Claire; Watt, Ian; Wright, John; Lawton, Rebecca

2018-03-15

Patient safety measurement remains a global challenge. Patients are an important but neglected source of learning; however, little is known about what patients can add to our understanding of safety. We sought to understand the incidence and nature of patient-reported safety concerns in hospital. Feedback about the experience of safety within hospital was gathered from 2471 inpatients as part of a multicentre, waitlist cluster randomised controlled trial of an intervention, undertaken within 33 wards across three English NHS Trusts, between May 2013 and September 2014. Patient volunteers, supported by researchers, developed a classification framework of patient-reported safety concerns from a random sample of 231 reports. All reports were then classified using the patient-developed categories. Following this, all patient-reported safety concerns underwent a two-stage clinical review process for identification of patient safety incidents. Of the 2471 inpatients recruited, 579 provided 1155 patient-reported incident reports. 14 categories were developed for classification of reports, with communication the most frequently occurring (22%), followed by staffing issues (13%) and problems with the care environment (12%). 406 of the total 1155 patient incident reports (35%) were classified by clinicians as a patient safety incident according to the standard definition. 1 in 10 patients (264 patients) identified a patient safety incident, with medication errors the most frequently reported incident. Our findings suggest that patients can provide insight about safety that complements existing patient safety measurement, with a frequency of reported patient safety incidents that is similar to those obtained via case note review. However, patients provide a unique perspective about hospital safety which differs from and adds to current definitions of patient safety incidents. ISRCTN07689702; pre-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Directory of aerospace safety specialized information sources

NASA Technical Reports Server (NTRS)

Fullerton, E. A.; Rubens, L. S.

1973-01-01

A directory is presented to make available to the aerospace safety community a handbook of organizations and experts in specific, well-defined areas of safety technology. It is designed for the safety specialist as an aid for locating both information sources and individual points of contact (experts) in engineering related fields. The file covers sources of data in aerospace design, tests, as well as information in hazard and failure cause identification, accident analysis, materials characteristics, and other related subject areas. These 171 organizations and their staff members, hopefully, should provide technical information in the form of documentation, data and consulting expertise. These will be sources that have assembled and collated their information, so that it will be useful in the solution of engineering problems. One of the goals of the project in the United States that have and are willing to share data of value to the aerospace safety community.

Ethnomedical survey and safety evaluation of traditional eye medicines used in Misungwi district, Tanzania

PubMed Central

Maregesi, Sheila M.; Messo, Charles W.; Mathias, Juma

2017-01-01

Aim: This study aimed at documenting products used as traditional eye medicine (TEM) in Misungwi district, Tanzania, and performing preliminary analysis on safety status. Methodology: Ethnomedical study was conducted in Misungwi district. Information was sourced by face-to-face interview with traditional healers, traditional medicine vendors, and knowledgeable people guided by a well-structured questionnaire. Safety was evaluated by determining pH using pH meter and mineral analysis using the Delta, Portable X-ray fluorescence equipment, and qualitative chemical tests. Results: A total of 23 TEM products were recorded from botanical (79%) and zoological (21%) sources including animal excreta. Liquid preparation ranked highest among dosage forms. Safety evaluation showed that only one product possessed the pH value of 7.4 as recommended for topical ophthalmic medicines. Fourteen minerals were detected and quantified in three samples; some of these minerals are known for their negative effects to the eyes, of medical interest is strontium used for the management of benign eye tumors. Information providers were unaware of health risks associated with the use of TEM. Conclusion: This study has revealed the common use of TEM in Misungwi district. The majority of the products are from the botanical source. Although literature provides supporting data for the application to some of the recorded TEM, safety evaluation by pH and mineral analysis in this study have indicated possible ophthalmological medical problems that could result from using such products. Extensive scientific studies including animal experiments and identification of bioactive compounds are essential to develop safe TEMs. PMID:28163964

Patient involvement in patient safety: Protocol for developing an intervention using patient reports of organisational safety and patient incident reporting.

PubMed

Ward, Jane K; McEachan, Rosemary R C; Lawton, Rebecca; Armitage, Gerry; Watt, Ian; Wright, John

2011-05-27

Patients have the potential to provide a rich source of information on both organisational aspects of safety and patient safety incidents. This project aims to develop two patient safety interventions to promote organisational learning about safety - a patient measure of organisational safety (PMOS), and a patient incident reporting tool (PIRT) - to help the NHS prevent patient safety incidents by learning more about when and why they occur. To develop the PMOS 1) literature will be reviewed to identify similar measures and key contributory factors to error; 2) four patient focus groups will ascertain practicality and feasibility; 3) 25 patient interviews will elicit approximately 60 items across 10 domains; 4) 10 patient and clinician interviews will test acceptability and understanding. Qualitative data will be analysed using thematic content analysis.To develop the PIRT 1) individual and then combined patient and clinician focus groups will provide guidance for the development of three potential reporting tools; 2) nine wards across three hospital directorates will pilot each of the tools for three months. The best performing tool will be identified from the frequency, volume and quality of reports. The validity of both measures will be tested. 300 patients will be asked to complete the PMOS and PIRT during their stay in hospital. A sub-sample (N = 50) will complete the PMOS again one week later. Health professionals in participating wards will also be asked to complete the AHRQ safety culture questionnaire. Case notes for all patients will be reviewed. The psychometric properties of the PMOS will be assessed and a final valid and reliable version developed. Concurrent validity for the PIRT will be assessed by comparing reported incidents with those identified from case note review and the existing staff reporting scheme. In a subsequent study these tools will be used to provide information to wards/units about their priorities for patient safety. A patient panel will provide steering to the research. The PMOS and PIRT aim to provide a reliable means of eliciting patient views about patient safety. Both interventions are likely to have relevance and practical utility for all NHS hospital trusts.

Increasing Safety of a Robotic System for Inner Ear Surgery Using Probabilistic Error Modeling Near Vital Anatomy

PubMed Central

Dillon, Neal P.; Siebold, Michael A.; Mitchell, Jason E.; Blachon, Gregoire S.; Balachandran, Ramya; Fitzpatrick, J. Michael; Webster, Robert J.

2017-01-01

Safe and effective planning for robotic surgery that involves cutting or ablation of tissue must consider all potential sources of error when determining how close the tool may come to vital anatomy. A pre-operative plan that does not adequately consider potential deviations from ideal system behavior may lead to patient injury. Conversely, a plan that is overly conservative may result in ineffective or incomplete performance of the task. Thus, enforcing simple, uniform-thickness safety margins around vital anatomy is insufficient in the presence of spatially varying, anisotropic error. Prior work has used registration error to determine a variable-thickness safety margin around vital structures that must be approached during mastoidectomy but ultimately preserved. In this paper, these methods are extended to incorporate image distortion and physical robot errors, including kinematic errors and deflections of the robot. These additional sources of error are discussed and stochastic models for a bone-attached robot for otologic surgery are developed. An algorithm for generating appropriate safety margins based on a desired probability of preserving the underlying anatomical structure is presented. Simulations are performed on a CT scan of a cadaver head and safety margins are calculated around several critical structures for planning of a robotic mastoidectomy. PMID:29200595

Increasing safety of a robotic system for inner ear surgery using probabilistic error modeling near vital anatomy

NASA Astrophysics Data System (ADS)

Dillon, Neal P.; Siebold, Michael A.; Mitchell, Jason E.; Blachon, Gregoire S.; Balachandran, Ramya; Fitzpatrick, J. Michael; Webster, Robert J.

2016-03-01

Safe and effective planning for robotic surgery that involves cutting or ablation of tissue must consider all potential sources of error when determining how close the tool may come to vital anatomy. A pre-operative plan that does not adequately consider potential deviations from ideal system behavior may lead to patient injury. Conversely, a plan that is overly conservative may result in ineffective or incomplete performance of the task. Thus, enforcing simple, uniform-thickness safety margins around vital anatomy is insufficient in the presence of spatially varying, anisotropic error. Prior work has used registration error to determine a variable-thickness safety margin around vital structures that must be approached during mastoidectomy but ultimately preserved. In this paper, these methods are extended to incorporate image distortion and physical robot errors, including kinematic errors and deflections of the robot. These additional sources of error are discussed and stochastic models for a bone-attached robot for otologic surgery are developed. An algorithm for generating appropriate safety margins based on a desired probability of preserving the underlying anatomical structure is presented. Simulations are performed on a CT scan of a cadaver head and safety margins are calculated around several critical structures for planning of a robotic mastoidectomy.

49 CFR 193.2445 - Sources of power.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY LIQUEFIED NATURAL GAS FACILITIES: FEDERAL SAFETY STANDARDS Equipment Vaporization Equipment § 193.2445 Sources of power. (a) Electrical...

Global access to safe water: accounting for water quality and the resulting impact on MDG progress.

PubMed

Onda, Kyle; LoBuglio, Joe; Bartram, Jamie

2012-03-01

Monitoring of progress towards the Millennium Development Goal (MDG) drinking water target relies on classification of water sources as "improved" or "unimproved" as an indicator for water safety. We adjust the current Joint Monitoring Programme (JMP) estimate by accounting for microbial water quality and sanitary risk using the only-nationally representative water quality data currently available, that from the WHO and UNICEF "Rapid Assessment of Drinking Water Quality". A principal components analysis (PCA) of national environmental and development indicators was used to create models that predicted, for most countries, the proportions of piped and of other-improved water supplies that are faecally contaminated; and of these sources, the proportions that lack basic sanitary protection against contamination. We estimate that 1.8 billion people (28% of the global population) used unsafe water in 2010. The 2010 JMP estimate is that 783 million people (11%) use unimproved sources. Our estimates revise the 1990 baseline from 23% to 37%, and the target from 12% to 18%, resulting in a shortfall of 10% of the global population towards the MDG target in 2010. In contrast, using the indicator "use of an improved source" suggests that the MDG target for drinking-water has already been achieved. We estimate that an additional 1.2 billion (18%) use water from sources or systems with significant sanitary risks. While our estimate is imprecise, the magnitude of the estimate and the health and development implications suggest that greater attention is needed to better understand and manage drinking water safety.

Environment, health and safety issues for sources used in MOVPE growth of compound semiconductors

NASA Astrophysics Data System (ADS)

Shenai-Khatkhate, Deodatta V.; Goyette, Randall J.; DiCarlo, Ronald L., Jr.; Dripps, Gregory

2004-12-01

As metalorganic vapor-phase epitaxy (MOVPE) is becoming well-established production technology, there are equally growing concerns associated with its bearing on personnel and community safety, environmental impact and maximum quantities of hazardous materials permissible in the device fabrication operations. Safety as well as responsible environmental care has always been of paramount importance in the MOVPE-based crystal growth of compound semiconductors. In this paper, we present the findings from workplace exposure monitoring studies on conventional MOVPE sources such as trimethylgallium, triethylgallium, trimethylantimony and diethylzinc. Also reviewed are the environmental, health and safety hazard aspects for metalorganic sources of routine elements, and the means to minimize the risks (i.e., engineering controls) involved while using these MOVPE sources.

Developing a Web-Based Advisory Expert System for Implementing Traffic Calming Strategies

PubMed Central

Falamarzi, Amir; Borhan, Muhamad Nazri; Rahmat, Riza Atiq O. K.

2014-01-01

Lack of traffic safety has become a serious issue in residential areas. In this paper, a web-based advisory expert system for the purpose of applying traffic calming strategies on residential streets is described because there currently lacks a structured framework for the implementation of such strategies. Developing an expert system can assist and advise engineers for dealing with traffic safety problems. This expert system is developed to fill the gap between the traffic safety experts and people who seek to employ traffic calming strategies including decision makers, engineers, and students. In order to build the expert system, examining sources related to traffic calming studies as well as interviewing with domain experts have been carried out. The system includes above 150 rules and 200 images for different types of measures. The system has three main functions including classifying traffic calming measures, prioritizing traffic calming strategies, and presenting solutions for different traffic safety problems. Verifying, validating processes, and comparing the system with similar works have shown that the system is consistent and acceptable for practical uses. Finally, some recommendations for improving the system are presented. PMID:25276861

Developing a web-based advisory expert system for implementing traffic calming strategies.

PubMed

Falamarzi, Amir; Borhan, Muhamad Nazri; Rahmat, Riza Atiq O K

2014-01-01

Lack of traffic safety has become a serious issue in residential areas. In this paper, a web-based advisory expert system for the purpose of applying traffic calming strategies on residential streets is described because there currently lacks a structured framework for the implementation of such strategies. Developing an expert system can assist and advise engineers for dealing with traffic safety problems. This expert system is developed to fill the gap between the traffic safety experts and people who seek to employ traffic calming strategies including decision makers, engineers, and students. In order to build the expert system, examining sources related to traffic calming studies as well as interviewing with domain experts have been carried out. The system includes above 150 rules and 200 images for different types of measures. The system has three main functions including classifying traffic calming measures, prioritizing traffic calming strategies, and presenting solutions for different traffic safety problems. Verifying, validating processes, and comparing the system with similar works have shown that the system is consistent and acceptable for practical uses. Finally, some recommendations for improving the system are presented.

Self-Powered Safety Helmet Based on Hybridized Nanogenerator for Emergency.

PubMed

Jin, Long; Chen, Jun; Zhang, Binbin; Deng, Weili; Zhang, Lei; Zhang, Haitao; Huang, Xi; Zhu, Minhao; Yang, Weiqing; Wang, Zhong Lin

2016-08-23

The rapid development of Internet of Things and the related sensor technology requires sustainable power sources for their continuous operation. Scavenging and utilizing the ambient environmental energy could be a superior solution. Here, we report a self-powered helmet for emergency, which was powered by the energy converted from ambient mechanical vibration via a hybridized nanogenerator that consists of a triboelectric nanogenerator (TENG) and an electromagnetic generator (EMG). Integrating with transformers and rectifiers, the hybridized nanogenerator can deliver a power density up to 167.22 W/m(3), which was demonstrated to light up 1000 commercial light-emitting diodes (LEDs) instantaneously. By wearing the developed safety helmet, equipped with rationally designed hybridized nanogenerator, the harvested vibration energy from natural human motion is also capable of powering a wireless pedometer for real-time transmitting data reporting to a personal cell phone. Without adding much extra weight to a commercial one, the developed wearing helmet can be a superior sustainable power source for explorers, engineers, mine-workers under well, as well as and disaster-relief workers, especially in remote areas. This work not only presents a significant step toward energy harvesting from human biomechanical movement, but also greatly expands the applicability of TENGs as power sources for self-sustained electronics.

Directory of aerospace safety specialized information sources

NASA Technical Reports Server (NTRS)

Fullerton, E. A.; Rubens, L. S.; Mandel, G.; Mckenna, P. J.

1974-01-01

Directory aids safety specialists in locating information sources and individual experts in engineering-related fields. Lists 170 organizations and approximately 300 individuals who can provide safety-related technical information in form of documentation, data, and consulting expertise. Information on hazard and failure cause identification, accident analysis, and materials characteristics are covered.

Safety aspects of nuclear waste disposal in space

NASA Technical Reports Server (NTRS)

Rice, E. E.; Edgecombe, D. S.; Compton, P. R.

1981-01-01

Safety issues involved in the disposal of nuclear wastes in space as a complement to mined geologic repositories are examined as part of an assessment of the feasibility of nuclear waste disposal in space. General safety guidelines for space disposal developed in the areas of radiation exposure and shielding, containment, accident environments, criticality, post-accident recovery, monitoring systems and isolation are presented for a nuclear waste disposal in space mission employing conventional space technology such as the Space Shuttle. The current reference concept under consideration by NASA and DOE is then examined in detail, with attention given to the waste source and mix, the waste form, waste processing and payload fabrication, shipping casks and ground transport vehicles, launch site operations and facilities, Shuttle-derived launch vehicle, orbit transfer vehicle, orbital operations and space destination, and the system safety aspects of the concept are discussed for each component. It is pointed out that future work remains in the development of an improved basis for the safety guidelines and the determination of the possible benefits and costs of the space disposal option for nuclear wastes.

Using the Framework for Health Promotion Action to address staff perceptions of occupational health and safety at a fly-in/fly-out mine in north-west Queensland.

PubMed

Devine, Susan G; Muller, Reinhold; Carter, Anthony

2008-12-01

An exploratory descriptive study was undertaken to identify staff perceptions of the types and sources of occupational health and safety hazards at a remote fly-in-fly-out minerals extraction and processing plant in northwest Queensland. Ongoing focus groups with all sectors of the operation were conducted concurrently with quantitative research studies from 2001 to 2005. Action research processes were used with management and staff to develop responses to identified issues. Staff identified and generated solutions to the core themes of: health and safety policies and procedures; chemical exposures; hydration and fatigue. The Framework for Health Promotion Action was applied to ensure a comprehensive and holistic response to identified issues. Participatory processes using an action research framework enabled a deep understanding of staff perceptions of occupational health and safety hazards in this setting. The Framework for Health Promotion provided a relevant and useful tool to engage with staff and develop solutions to perceived occupational health and safety issues in the workplace.

Assessing characteristics related to the use of seatbelts and cell phones by drivers: application of a bivariate probit model.

PubMed

Russo, Brendan J; Kay, Jonathan J; Savolainen, Peter T; Gates, Timothy J

2014-06-01

The effects of cell phone use and safety belt use have been an important focus of research related to driver safety. Cell phone use has been shown to be a significant source of driver distraction contributing to substantial degradations in driver performance, while safety belts have been demonstrated to play a vital role in mitigating injuries to crash-involved occupants. This study examines the prevalence of cell phone use and safety belt non-use among the driving population through direct observation surveys. A bivariate probit model is developed to simultaneously examine the factors that affect cell phone and safety belt use among motor vehicle drivers. The results show that several factors may influence drivers' decision to use cell phones and safety belts, and that these decisions are correlated. Understanding the factors that affect both cell phone use and safety belt non-use is essential to targeting policy and programs that reduce such behavior. Copyright © 2014 Elsevier Ltd. All rights reserved.

Safety and Offshore Oil: Background Papers of the Committee on Assessment of Safety of OCS Activities.

DTIC Science & Technology

1981-01-01

areas in the world. Data to gauge the effects of drilling are unavailable, and technology not only to develop, produce and transport hydrocarbons but to...spills associated with drillng operations and the transport of oil ashore for processing and refining--whether by tanker or pipeline --can and do pose...associated with each of these forms of transport . In the past, pipeline accidents released more oil to the marine environment than any other source directly

Study on the evaluation method for fault displacement based on characterized source model

NASA Astrophysics Data System (ADS)

Tonagi, M.; Takahama, T.; Matsumoto, Y.; Inoue, N.; Irikura, K.; Dalguer, L. A.

2016-12-01

In IAEA Specific Safety Guide (SSG) 9 describes that probabilistic methods for evaluating fault displacement should be used if no sufficient basis is provided to decide conclusively that the fault is not capable by using the deterministic methodology. In addition, International Seismic Safety Centre compiles as ANNEX to realize seismic hazard for nuclear facilities described in SSG-9 and shows the utility of the deterministic and probabilistic evaluation methods for fault displacement. In Japan, it is required that important nuclear facilities should be established on ground where fault displacement will not arise when earthquakes occur in the future. Under these situations, based on requirements, we need develop evaluation methods for fault displacement to enhance safety in nuclear facilities. We are studying deterministic and probabilistic methods with tentative analyses using observed records such as surface fault displacement and near-fault strong ground motions of inland crustal earthquake which fault displacements arose. In this study, we introduce the concept of evaluation methods for fault displacement. After that, we show parts of tentative analysis results for deterministic method as follows: (1) For the 1999 Chi-Chi earthquake, referring slip distribution estimated by waveform inversion, we construct a characterized source model (Miyake et al., 2003, BSSA) which can explain observed near-fault broad band strong ground motions. (2) Referring a characterized source model constructed in (1), we study an evaluation method for surface fault displacement using hybrid method, which combines particle method and distinct element method. At last, we suggest one of the deterministic method to evaluate fault displacement based on characterized source model. This research was part of the 2015 research project `Development of evaluating method for fault displacement` by the Secretariat of Nuclear Regulation Authority (S/NRA), Japan.

A primer of drug safety surveillance: an industry perspective. Part II: Product labeling and product knowledge.

PubMed

Allan, M C

1992-01-01

To place the fundamentals of clinical drug safety surveillance in a conceptual framework that will facilitate understanding and application of adverse drug event data to protect the health of the public and support a market for pharmaceutical manufacturers' products. Part II of this series discusses specific issues regarding product labeling, such as developing the labeling, changing the labeling, and the legal as well as commercial ramifications of the contents of the labeling. An adverse event report scenario is further analyzed and suggestions are offered for maintaining the product labeling as an accurate reflection of the drug safety surveillance data. This article also emphasizes the necessity of product knowledge in adverse event database management. Both scientific and proprietary knowledge are required. Acquiring product knowledge is a part of the day-to-day activities of drug safety surveillance. A knowledge of the history of the product may forestall adverse publicity, as shown in the illustration. This review uses primary sources from the federal laws (regulations), commentaries, and summaries. Very complex topics are briefly summarized in the text. Secondary sources, ranging from newspaper articles to judicial summaries, illustrate the interpretation of adverse drug events and opportunities for drug safety surveillance intervention. The reference materials used were articles theoretically or practically applicable in the day-to-day practice of drug safety surveillance. The role of clinical drug safety surveillance in product monitoring and drug development is described. The process of drug safety surveillance is defined by the Food and Drug Administration regulations, product labeling, product knowledge, and database management. Database management is subdivided into the functions of receipt, retention, retrieval, and review of adverse event reports. Emphasis is placed on the dynamic interaction of the components of the process. Suggestions are offered to facilitate communication of a review of adverse event data for various audiences. Careful drug safety surveillance is beneficial to the health of the public and the commercial well-being of the manufacturer. Attention to the basic principles is essential and, as illustrated, may be sufficient to resolve some problems.

Integrated and Translational Nonclinical In Vivo Cardiovascular Risk Assessment: Gaps and Opportunities

EPA Science Inventory

Cardiovascular (CV) safety concerns are a significant source of drug development attrition in the pharmaceutical industry today. Though current nonclinical testing paradigms have largely prevented catastrophic CV events in Phase I studies, many challenges relating to the inabil...

A Low-Cost, Effective, Fumes Exhaust System.

ERIC Educational Resources Information Center

Jacobs, C. O.

1979-01-01

Discusses the importance of avoiding welding fumes. The sources of these fumes are presented in a table. Criticizes currently used ventilation systems and reviews the Occupational Safety and Health Act requirements. Describes a low-cost exhaust system developed for agricultural mechanics laboratories. (LRA)

Subsystem Hazard Analysis Methodology for the Ares I Upper Stage Source Controlled Items

NASA Technical Reports Server (NTRS)

Mitchell, Michael S.; Winner, David R.

2010-01-01

This article describes processes involved in developing subsystem hazard analyses for Source Controlled Items (SCI), specific components, sub-assemblies, and/or piece parts, of the NASA ARES I Upper Stage (US) project. SCIs will be designed, developed and /or procured by Boeing as an end item or an off-the-shelf item. Objectives include explaining the methodology, tools, stakeholders and products involved in development of these hazard analyses. Progress made and further challenges in identifying potential subsystem hazards are also provided in an effort to assist the System Safety community in understanding one part of the ARES I Upper Stage project.

Major safety provisions in nuclear-powered ships

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khlopkin, N.S.; Belyaev, V.M.; Dubrovin, A.M.

1984-12-01

Considerable experience has been accumulated in the Soviet Union on the design, construction and operation of nuclear-powered civilian ships: the icebreakers Lenin, Leonid Brezhnev and Sibir. The nuclear steam plants (NSP) used on these as the main energy source have been found to be highly reliable and safe, and it is desirable to use them in the future not only in icebreakers but also in transport ships for use in ice fields. The Soviet program for building and developing nuclear-powered ships has involved careful attention to safety in ships containing NSP. The experience with the design and operation of nuclearmore » icebreakers in recent years has led to the revision of safety standards for the nuclear ships and correspondingly ship NSP and international guidelines have been developed. If one meets the requirements as set forth in these documents, one has a safe basis for future Soviet nuclear-powered ships. The primary safety provisions for NSP are presented in this paper.« less

Sample Based Unit Liter Dose Estimates

DOE Office of Scientific and Technical Information (OSTI.GOV)

JENSEN, L.

The Tank Waste Characterization Program has taken many core samples, grab samples, and auger samples from the single-shell and double-shell tanks during the past 10 years. Consequently, the amount of sample data available has increased, both in terms of quantity of sample results and the number of tanks characterized. More and better data is available than when the current radiological and toxicological source terms used in the Basis for Interim Operation (BIO) (FDH 1999a) and the Final Safety Analysis Report (FSAR) (FDH 1999b) were developed. The Nuclear Safety and Licensing (NS and L) organization wants to use the new datamore » to upgrade the radiological and toxicological source terms used in the BIO and FSAR. The NS and L organization requested assistance in producing a statistically based process for developing the source terms. This report describes the statistical techniques used and the assumptions made to support the development of a new radiological source term for liquid and solid wastes stored in single-shell and double-shell tanks. The results given in this report are a revision to similar results given in an earlier version of the document (Jensen and Wilmarth 1999). The main difference between the results in this document and the earlier version is that the dose conversion factors (DCF) for converting {mu}Ci/g or {mu}Ci/L to Sv/L (sieverts per liter) have changed. There are now two DCFs, one based on ICRP-68 and one based on ICW-71 (Brevick 2000).« less

Road safety performance indicators for the interurban road network.

PubMed

Yannis, George; Weijermars, Wendy; Gitelman, Victoria; Vis, Martijn; Chaziris, Antonis; Papadimitriou, Eleonora; Azevedo, Carlos Lima

2013-11-01

Various road safety performance indicators (SPIs) have been proposed for different road safety research areas, mainly as regards driver behaviour (e.g. seat belt use, alcohol, drugs, etc.) and vehicles (e.g. passive safety); however, no SPIs for the road network and design have been developed. The objective of this research is the development of an SPI for the road network, to be used as a benchmark for cross-region comparisons. The developed SPI essentially makes a comparison of the existing road network to the theoretically required one, defined as one which meets some minimum requirements with respect to road safety. This paper presents a theoretical concept for the determination of this SPI as well as a translation of this theory into a practical method. Also, the method is applied in a number of pilot countries namely the Netherlands, Portugal, Greece and Israel. The results show that the SPI could be efficiently calculated in all countries, despite some differences in the data sources. In general, the calculated overall SPI scores were realistic and ranged from 81 to 94%, with the exception of Greece where the SPI was relatively lower (67%). However, the SPI should be considered as a first attempt to determine the safety level of the road network. The proposed method has some limitations and could be further improved. The paper presents directions for further research to further develop the SPI. Copyright © 2012 Elsevier Ltd. All rights reserved.

An Investigation for Ground State Features of Some Structural Fusion Materials

NASA Astrophysics Data System (ADS)

Aytekin, H.; Tel, E.; Baldik, R.; Aydin, A.

2011-02-01

Environmental concerns associated with fossil fuels are creating increased interest in alternative non-fossil energy sources. Nuclear fusion can be one of the most attractive sources of energy from the viewpoint of safety and minimal environmental impact. When considered in all energy systems, the requirements for performance of structural materials in a fusion reactor first wall, blanket or diverter, are arguably more demanding or difficult than for other energy system. The development of fusion materials for the safety of fusion power systems and understanding nuclear properties is important. In this paper, ground state properties for some structural fusion materials as 27Al, 51V, 52Cr, 55Mn, and 56Fe are investigated using Skyrme-Hartree-Fock method. The obtained results have been discussed and compared with the available experimental data.

[Case Study] CityCenter and Cosmopolitan Construction Projects, Las Vegas, Nevada: lessons learned from the use of multiple sources and mixed methods in a safety needs assessment.

PubMed

Gittleman, Janie L; Gardner, Paige C; Haile, Elizabeth; Sampson, Julie M; Cigularov, Konstantin P; Ermann, Erica D; Stafford, Pete; Chen, Peter Y

2010-06-01

The present study describes a response to eight tragic deaths over an eighteen month times span on a fast track construction project on the largest commercial development project in U.S. history. Four versions of a survey were distributed to workers, foremen, superintendents, and senior management. In addition to standard Likert-scale safety climate scale items, an open-ended item was included at the end of the survey. Safety climate perceptions differed by job level. Specifically, management perceived a more positive safety climate as compared to workers. Content analysis of the open-ended item was used to identify important safety and health concerns which might have been overlooked with the qualitative portion of the survey. The surveys were conducted to understand workforce issues of concern with the aim of improving site safety conditions. Such efforts can require minimal investment of resources and time and result in critical feedback for developing interventions affecting organizational structure, management processes, and communication. The most important lesson learned was that gauging differences in perception about site safety can provide critical feedback at all levels of a construction organization. Implementation of multi-level organizational perception surveys can identify major safety issues of concern. Feedback, if acted upon, can potentially result in fewer injuries and fatal events. (c) 2010 Elsevier Ltd. All rights reserved.

The Old Jalopy Races into the Future.

ERIC Educational Resources Information Center

Considine, Tim

1993-01-01

Discusses alternative transportation technological advances in speed, range, battery strategies, and safety facilitated by motor car racing. Presents a historical perspective of the development of steam, electric and gas-powered vehicles and modern versions of electric, and mixed power source cars being tested today. (MCO)

Directory of aerospace safety specialized information sources, volume 2

NASA Technical Reports Server (NTRS)

Rubinstein, R. I.; Pinto, J. J.; Meschkow, S. Z.

1976-01-01

A handbook of organizations and experts in specific and well-defined areas of safety technology is presented. It is designed for the safety specialist as an aid for locating both information sources and individual points of contact (experts) in engineering related fields. The file covers sources of data in aerospace design, tests, and operations, as well as information on hazard and failure cause identification, accident analysis, and materials characteristics. Other related areas include the handling and transportation of hazardous chemicals, radioactive isotopes, and liquified natural gases.

Agile Methods for Open Source Safety-Critical Software

PubMed Central

Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

2011-01-01

The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the right amount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion. PMID:21799545

Agile Methods for Open Source Safety-Critical Software.

PubMed

Gary, Kevin; Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

2011-08-01

The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the rightamount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion.

Empirical Model Development for Predicting Shock Response on Composite Materials Subjected to Pyroshock Loading

NASA Technical Reports Server (NTRS)

Gentz, Steven J.; Ordway, David O; Parsons, David S.; Garrison, Craig M.; Rodgers, C. Steven; Collins, Brian W.

2015-01-01

The NASA Engineering and Safety Center (NESC) received a request to develop an analysis model based on both frequency response and wave propagation analyses for predicting shock response spectrum (SRS) on composite materials subjected to pyroshock loading. The model would account for near-field environment (approx. 9 inches from the source) dominated by direct wave propagation, mid-field environment (approx. 2 feet from the source) characterized by wave propagation and structural resonances, and far-field environment dominated by lower frequency bending waves in the structure. This report documents the outcome of the assessment.

Empirical Model Development for Predicting Shock Response on Composite Materials Subjected to Pyroshock Loading. [Appendices

NASA Technical Reports Server (NTRS)

Gentz, Steven J.; Ordway, David O.; Parsons, David S.; Garrison, Craig M.; Rodgers, C. Steven; Collins, Brian W.

2015-01-01

The NASA Engineering and Safety Center (NESC) received a request to develop an analysis model based on both frequency response and wave propagation analyses for predicting shock response spectrum (SRS) on composite materials subjected to pyroshock loading. The model would account for near-field environment (9 inches from the source) dominated by direct wave propagation, mid-field environment (approximately 2 feet from the source) characterized by wave propagation and structural resonances, and far-field environment dominated by lower frequency bending waves in the structure. This document contains appendices to the Volume I report.

Empirical Model Development for Predicting Shock Response on Composite Materials Subjected to Pyroshock Loading: Appendices

NASA Technical Reports Server (NTRS)

Gentz, Steven J.; Ordway, David O.; Parsons, David S.; Garrison, Craig M.; Rodgers, C. Steven; Collins, Brian W.

2015-01-01

The NASA Engineering and Safety Center (NESC) received a request to develop an analysis model based on both frequency response and wave propagation analyses for predicting shock response spectrum (SRS) on composite materials subjected to pyroshock loading. The model would account for near-field environment (approx. 9 inches from the source) dominated by direct wave propagation, mid-field environment (approx. 2 feet from the source) characterized by wave propagation and structural resonances, and far-field environment dominated by lower frequency bending waves in the structure. This document contains appendices to the Volume I report.

Initial Demonstration of the Real-Time Safety Monitoring Framework for the National Airspace System Using Flight Data

NASA Technical Reports Server (NTRS)

Roychoudhury, Indranil; Daigle, Matthew; Goebel, Kai; Spirkovska, Lilly; Sankararaman, Shankar; Ossenfort, John; Kulkarni, Chetan; McDermott, William; Poll, Scott

2016-01-01

As new operational paradigms and additional aircraft are being introduced into the National Airspace System (NAS), maintaining safety in such a rapidly growing environment becomes more challenging. It is therefore desirable to have an automated framework to provide an overview of the current safety of the airspace at different levels of granularity, as well an understanding of how the state of the safety will evolve into the future given the anticipated flight plans, weather forecast, predicted health of assets in the airspace, and so on. Towards this end, as part of our earlier work, we formulated the Real-Time Safety Monitoring (RTSM) framework for monitoring and predicting the state of safety and to predict unsafe events. In our previous work, the RTSM framework was demonstrated in simulation on three different constructed scenarios. In this paper, we further develop the framework and demonstrate it on real flight data from multiple data sources. Specifically, the flight data is obtained through the Shadow Mode Assessment using Realistic Technologies for the National Airspace System (SMART-NAS) Testbed that serves as a central point of collection, integration, and access of information from these different data sources. By testing and evaluating using real-world scenarios, we may accelerate the acceptance of the RTSM framework towards deployment. In this paper we demonstrate the framework's capability to not only estimate the state of safety in the NAS, but predict the time and location of unsafe events such as a loss of separation between two aircraft, or an aircraft encountering convective weather. The experimental results highlight the capability of the approach, and the kind of information that can be provided to operators to improve their situational awareness in the context of safety.

Innovations for the future of pharmacovigilance.

PubMed

Almenoff, June S

2007-01-01

Post-marketing pharmacovigilance involves the review and management of safety information from many sources. Among these sources, spontaneous adverse event reporting systems are among the most challenging and resource-intensive to manage. Traditionally, efforts to monitor spontaneous adverse event reporting systems have focused on review of individual case reports. The science of pharmacovigilance could be enhanced with the availability of systems-based tools that facilitate analysis of aggregate data for purposes of signal detection, signal evaluation and knowledge management. GlaxoSmithKline (GSK) recently implemented Online Signal Management (OSM) as a data-driven framework for managing the pharmacovigilance of marketed products. This pioneering work builds upon the strong history GSK has of innovation in this area. OSM is a software application co-developed by GSK and Lincoln Technologies that integrates traditional pharmacovigilance methods with modern quantitative statistical methods and data visualisation tools. OSM enables the rapid identification of trends from the individual adverse event reports received by GSK. OSM also provides knowledge-management tools to ensure the successful tracking of emerging safety issues. GSK has developed standard procedures and 'best practices' around the use of OSM to ensure the systematic evaluation of complex safety datasets. In summary, the implementation of OSM provides new tools and efficient processes to advance the science of pharmacovigilance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pinkston, David

Four slides present a historical perspective on the evolution of nuclear safety, a description of systemic misalignment (available resources do not match expectations, demographic cliff developing, promulgation of increased expectations and new requirements proceeds unabated), and needs facing nuclear safety (financial stability, operational stability, and succession planning). The following conclusions are stated under the heading "Nuclear Safety - 'The System'": the current universe of requirements is too large for the resource pool available; the current universe of requirements has too many different sources of interpretation; there are so many indicators that it’s hard to know what is leading (or important);more » and the net result can come to defy integrated comprehension at the worker level.« less

Genuine worker participation-an indispensable key to effective global OHS.

PubMed

Brown, Garrett

2009-01-01

Working conditions, including workplace safety, in global supply chains of products sold by transnational corporations have only marginally improved over the last 15 years despite the development of hundreds of corporate "codes of conduct," code monitoring systems, and an elaborate new "corporate social responsibility" industry. The two underlying reasons for the lack of significant change are: 1) a schizophrenic business model which fatally undermines "socially responsible" sourcing programs with unyielding dictates for the lowest possible production costs; and 2) the lack of any meaningful participation by shop-floor workers in plant safety programs. Only when trained, empowered, and active workers are an integral part of workplace safety programs will conditions improve over the long term.

Investigation of alternate power source for Space Shuttle Orbiter hydraulic system

NASA Technical Reports Server (NTRS)

Simon, William E.; Young, Fred M.

1993-01-01

This investigation consists of a short-term feasibility study to determine whether or not an alternate electrical power source would trade favorably from a performance, reliability, safety, operation, and weight standpoint in replacing the current auxiliary power unit subsystems with its attendant components (water spray boiler, hydrazine fuel and tanks, feed and vent lines, controls, etc.), operating under current flight rules. Results of this feasibility study are used to develop recommendations for the next step (e.g., to determine if such an alternate electrical power source would show an advantage given that the current operational flight mode of the system could be modified in such a way as not to constrain the operational capability and safety of the vehicle). However, this next step is not within the scope of this investigation. This study does not include a cost analysis, nor does it include investigation of the integration aspects involved in such a trade, except in a qualitative sense for the determination of concept feasibility.

Factors Of Environmental Safety And Environmentally Efficient Technologies Transportation Facilities Gas Transportation Industry

NASA Astrophysics Data System (ADS)

Vasiliev, Bogdan U.

2017-01-01

The stable development of the European countries depends on a reliable and efficient operation of the gas transportation system (GTS). With high reliability of GTS it is necessary to ensure its industrial and environmental safety. In this article the major factors influencing on an industrial and ecological safety of GTS are analyzed, sources of GTS safety decreasing is revealed, measures for providing safety are proposed. The article shows that use of gas-turbine engines of gas-compressor units (GCU) results in the following phenomena: emissions of harmful substances in the atmosphere; pollution by toxic waste; harmful noise and vibration; thermal impact on environment; decrease in energy efficiency. It is shown that for the radical problem resolution of an industrial and ecological safety of gas-transmission system it is reasonable to use gas-compressor units driven by electric motors. Their advantages are shown. Perspective technologies of these units and experience of their use in Europe and the USA are given in this article.

X-33 Telemetry Best Source Selection, Processing, Display, and Simulation Model Comparison

NASA Technical Reports Server (NTRS)

Burkes, Darryl A.

1998-01-01

The X-33 program requires the use of multiple telemetry ground stations to cover the launch, ascent, transition, descent, and approach phases for the flights from Edwards AFB to landings at Dugway Proving Grounds, UT and Malmstrom AFB, MT. This paper will discuss the X-33 telemetry requirements and design, including information on fixed and mobile telemetry systems, best source selection, and support for Range Safety Officers. A best source selection system will be utilized to automatically determine the best source based on the frame synchronization status of the incoming telemetry streams. These systems will be used to select the best source at the landing sites and at NASA Dryden Flight Research Center to determine the overall best source between the launch site, intermediate sites, and landing site sources. The best source at the landing sites will be decommutated to display critical flight safety parameters for the Range Safety Officers. The overall best source will be sent to the Lockheed Martin's Operational Control Center at Edwards AFB for performance monitoring by X-33 program personnel and for monitoring of critical flight safety parameters by the primary Range Safety Officer. The real-time telemetry data (received signal strength, etc.) from each of the primary ground stations will also be compared during each nu'ssion with simulation data generated using the Dynamic Ground Station Analysis software program. An overall assessment of the accuracy of the model will occur after each mission. Acknowledgment: The work described in this paper was NASA supported through cooperative agreement NCC8-115 with Lockheed Martin Skunk Works.

Open Source, Open Standards, and Health Care Information Systems

PubMed Central

2011-01-01

Recognition of the improvements in patient safety, quality of patient care, and efficiency that health care information systems have the potential to bring has led to significant investment. Globally the sale of health care information systems now represents a multibillion dollar industry. As policy makers, health care professionals, and patients, we have a responsibility to maximize the return on this investment. To this end we analyze alternative licensing and software development models, as well as the role of standards. We describe how licensing affects development. We argue for the superiority of open source licensing to promote safer, more effective health care information systems. We claim that open source licensing in health care information systems is essential to rational procurement strategy. PMID:21447469

Open source, open standards, and health care information systems.

PubMed

Reynolds, Carl J; Wyatt, Jeremy C

2011-02-17

Recognition of the improvements in patient safety, quality of patient care, and efficiency that health care information systems have the potential to bring has led to significant investment. Globally the sale of health care information systems now represents a multibillion dollar industry. As policy makers, health care professionals, and patients, we have a responsibility to maximize the return on this investment. To this end we analyze alternative licensing and software development models, as well as the role of standards. We describe how licensing affects development. We argue for the superiority of open source licensing to promote safer, more effective health care information systems. We claim that open source licensing in health care information systems is essential to rational procurement strategy.

Toward generalized human factors taxonomy for classifying ASAP incident reports, AQP performance ratings, and FOQA output

DOT National Transportation Integrated Search

2003-01-01

Over the years, the FAA has partnered with industry to develop a number of programs for reporting, classifying, and analyzing safety-related data. Despite their successes, none of these programs has been able to integrate data from multiple sources. ...

Model-Based Safety Analysis

NASA Technical Reports Server (NTRS)

Joshi, Anjali; Heimdahl, Mats P. E.; Miller, Steven P.; Whalen, Mike W.

2006-01-01

System safety analysis techniques are well established and are used extensively during the design of safety-critical systems. Despite this, most of the techniques are highly subjective and dependent on the skill of the practitioner. Since these analyses are usually based on an informal system model, it is unlikely that they will be complete, consistent, and error free. In fact, the lack of precise models of the system architecture and its failure modes often forces the safety analysts to devote much of their effort to gathering architectural details about the system behavior from several sources and embedding this information in the safety artifacts such as the fault trees. This report describes Model-Based Safety Analysis, an approach in which the system and safety engineers share a common system model created using a model-based development process. By extending the system model with a fault model as well as relevant portions of the physical system to be controlled, automated support can be provided for much of the safety analysis. We believe that by using a common model for both system and safety engineering and automating parts of the safety analysis, we can both reduce the cost and improve the quality of the safety analysis. Here we present our vision of model-based safety analysis and discuss the advantages and challenges in making this approach practical.

Assessment of Contributions to Patient Safety Knowledge by the Agency for Healthcare Research and Quality-Funded Patient Safety Projects

PubMed Central

Sorbero, Melony E S; Ricci, Karen A; Lovejoy, Susan; Haviland, Amelia M; Smith, Linda; Bradley, Lily A; Hiatt, Liisa; Farley, Donna O

2009-01-01

Objective To characterize the activities of projects funded in Agency for Healthcare Research and Quality (AHRQ)' patient safety portfolio and assess their aggregate potential to contribute to knowledge development. Data Sources Information abstracted from proposals for projects funded in AHRQ' patient safety portfolio, information on safety practices from the AHRQ Evidence Report on Patient Safety Practices, and products produced by the projects. Study Design This represented one part of the process evaluation conducted as part of a longitudinal evaluation based on the Context–Input–Process–Product model. Principal Findings The 234 projects funded through AHRQ' patient safety portfolio examined a wide variety of patient safety issues and extended their work beyond the hospital setting to less studied parts of the health care system. Many of the projects implemented and tested practices for which the patient safety evidence report identified a need for additional evidence. The funded projects also generated a substantial body of new patient safety knowledge through a growing number of journal articles and other products. Conclusions The projects funded in AHRQ' patient safety portfolio have the potential to make substantial contributions to the knowledge base on patient safety. The full value of this new knowledge remains to be confirmed through the synthesis of results. PMID:21456108

10 CFR 32.74 - Manufacture and distribution of sources or devices containing byproduct material for medical use.

Code of Federal Regulations, 2013 CFR

2013-01-01

... accidents; (iv) For devices containing byproduct material, the radiation profile of a prototype device; (v... source or device pertinent to an evaluation of its radiation safety, including: (i) The byproduct...) Instructions for handling and storing the source or device from the radiation safety standpoint; these...

10 CFR 32.74 - Manufacture and distribution of sources or devices containing byproduct material for medical use.

Code of Federal Regulations, 2014 CFR

2014-01-01

... accidents; (iv) For devices containing byproduct material, the radiation profile of a prototype device; (v... source or device pertinent to an evaluation of its radiation safety, including: (i) The byproduct...) Instructions for handling and storing the source or device from the radiation safety standpoint; these...

Final safety analysis report for the Galileo Mission: Volume 2, Book 2: Accident model document: Appendices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-12-15

This section of the Accident Model Document (AMD) presents the appendices which describe the various analyses that have been conducted for use in the Galileo Final Safety Analysis Report II, Volume II. Included in these appendices are the approaches, techniques, conditions and assumptions used in the development of the analytical models plus the detailed results of the analyses. Also included in these appendices are summaries of the accidents and their associated probabilities and environment models taken from the Shuttle Data Book (NSTS-08116), plus summaries of the several segments of the recent GPHS safety test program. The information presented in thesemore » appendices is used in Section 3.0 of the AMD to develop the Failure/Abort Sequence Trees (FASTs) and to determine the fuel releases (source terms) resulting from the potential Space Shuttle/IUS accidents throughout the missions.« less

Chemical Safety Alert: Use Multiple Data Sources for Safer Emergency Response

EPA Pesticide Factsheets

Increases awareness of Material Safety Data Sheet (MSDS) limitations so that first responders to accidental releases can take proper precautions and identify additional sources of chemical information, such as reactivity and incompatibility.

The use of pyro-polymeric catalysts and a new cylindrical cell design in oxygen-aluminum generators

NASA Astrophysics Data System (ADS)

Kiseleva, E. A.; Zhuk, A. Z.; Kleymenov, B. V.; Oudaltsov, V. G.

2018-01-01

The increase in energy consumption, the economic crisis, the development of certain areas of engineering and energy, as well as the related deterioration of the environmental situation, require the development of new electrochemical current sources with high specific characteristics. In the field of creating air-hydrogen fuel cells, the problems of safety and mobile storage of hydrogen have not been completely solved, stagnation in the development of lithium-ion, lithium-air and lithium-sulfur batteries has been outlined. All this requires searching for new technological solutions, ways to increase the energy and resource characteristics of electrochemical current sources (ECS), reducing their cost [1-2]. The use of metals (aluminum, zinc, magnesium) as an energy carrier is due to their high energy intensity (in combination with the lack of transport, storage and on-board storage problems) of the relatively low cost of metals, their availability, storage safety and the absence of harmful emissions when used. As in the chemical and electrochemical use of metals, safe products (oxides, hydroxides) are formed, which are reduced to metals within the framework of traditional production technologies. Thus, a closed cycle of energy use is organized. The task of this paper is to evaluate the possibility of reducing the cost and increasing the specific power of ECS using oxygen depolarization. The goal is achieved by using non-platinum catalysts and optimizing the design of the current source.

Tracing the foundations of a conceptual framework for a patient safety ontology.

PubMed

Runciman, William B; Baker, G Ross; Michel, Philippe; Dovey, Susan; Lilford, Richard J; Jensen, Natasja; Flin, Rhona; Weeks, William B; Lewalle, Pierre; Larizgoitia, Itziar; Bates, David

2010-12-01

In work for the World Alliance for Patient Safety on research methods and measures and on defining key concepts for an International Patient Safety Classification (ICPS), it became apparent that there was a need to try to understand how the meaning of patient safety and underlying concepts relate to the existing safety and quality frameworks commonly used in healthcare. To unfold the concept of patient safety and how it relates to safety and quality frameworks commonly used in healthcare and to trace the evolution of the ICPS framework as a basis of the electronic capture of the component elements of patient safety. The ICPS conceptual framework for patient safety has its origins in existing frameworks and an international consultation process. Although its 10 classes and their semantic relationships may be used as a reference model for different disciplines, it must remain dynamic in the ever-changing world of healthcare. By expanding the ICPS by examining data from all available sources, and ensuring rigorous compliance with the latest principles of informatics, a deeper interdisciplinary approach will progressively be developed to address the complex, refractory problem of reducing healthcare-associated harm.

Ensuring the Environmental and Industrial Safety in Solid Mineral Deposit Surface Mining

NASA Astrophysics Data System (ADS)

Trubetskoy, Kliment; Rylnikova, Marina; Esina, Ekaterina

2017-11-01

The growing environmental pressure of mineral deposit surface mining and severization of industrial safety requirements dictate the necessity of refining the regulatory framework governing safe and efficient development of underground resources. The applicable regulatory documentation governing the procedure of ore open-pit wall and bench stability design for the stage of pit reaching its final boundary was issued several decades ago. Over recent decades, mining and geomechanical conditions have changed significantly in surface mining operations, numerous new software packages and computer developments have appeared, opportunities of experimental methods of source data collection and processing, grounding of the permissible parameters of open pit walls have changed dramatically, and, thus, methods of risk assessment have been perfected [10-13]. IPKON RAS, with the support of the Federal Service for Environmental Supervision, assumed the role of the initiator of the project for the development of Federal norms and regulations of industrial safety "Rules for ensuring the stability of walls and benches of open pits, open-cast mines and spoil banks", which contribute to the improvement of economic efficiency and safety of mineral deposit surface mining and enhancement of the competitiveness of Russian mines at the international level that is very important in the current situation.

Correlation between safety climate and contractor safety assessment programs in construction

PubMed Central

Sparer, EH1; Murphy, LA; Taylor, KM; Dennerlein, Jt

2015-01-01

Background Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Methods 401 construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. Results There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers’ safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. Conclusions A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. PMID:24038403

Evaluating the Safety Profile of Non-Active Implantable Medical Devices Compared with Medicines.

PubMed

Pane, Josep; Coloma, Preciosa M; Verhamme, Katia M C; Sturkenboom, Miriam C J M; Rebollo, Irene

2017-01-01

Recent safety issues involving non-active implantable medical devices (NAIMDs) have highlighted the need for better pre-market and post-market evaluation. Some stakeholders have argued that certain features of medicine safety evaluation should also be applied to medical devices. Our objectives were to compare the current processes and methodologies for the assessment of NAIMD safety profiles with those for medicines, identify potential gaps, and make recommendations for the adoption of new methodologies for the ongoing benefit-risk monitoring of these devices throughout their entire life cycle. A literature review served to examine the current tools for the safety evaluation of NAIMDs and those for medicines. We searched MEDLINE using these two categories. We supplemented this search with Google searches using the same key terms used in the MEDLINE search. Using a comparative approach, we summarized the new product design, development cycle (preclinical and clinical phases), and post-market phases for NAIMDs and drugs. We also evaluated and compared the respective processes to integrate and assess safety data during the life cycle of the products, including signal detection, signal management, and subsequent potential regulatory actions. The search identified a gap in NAIMD safety signal generation: no global program exists that collects and analyzes adverse events and product quality issues. Data sources in real-world settings, such as electronic health records, need to be effectively identified and explored as additional sources of safety information, particularly in some areas such as the EU and USA where there are plans to implement the unique device identifier (UDI). The UDI and other initiatives will enable more robust follow-up and assessment of long-term patient outcomes. The safety evaluation system for NAIMDs differs in many ways from those for drugs, but both systems face analogous challenges with respect to monitoring real-world usage. Certain features of the drug safety evaluation process could, if adopted and adapted for NAIMDs, lead to better and more systematic evaluations of the latter.

Good practice statements on safe laboratory testing: A mixed methods study by the LINNEAUS collaboration on patient safety in primary care.

PubMed

Bowie, Paul; Forrest, Eleanor; Price, Julie; Verstappen, Wim; Cunningham, David; Halley, Lyn; Grant, Suzanne; Kelly, Moya; Mckay, John

2015-09-01

The systems-based management of laboratory test ordering and results handling is a known source of error in primary care settings worldwide. The consequences are wide-ranging for patients (e.g. avoidable harm or poor care experience), general practitioners (e.g. delayed clinical decision making and potential medico-legal implications) and the primary care organization (e.g. increased allocation of resources to problem-solve and dealing with complaints). Guidance is required to assist care teams to minimize associated risks and improve patient safety. To identify, develop and build expert consensus on 'good practice' guidance statements to inform the implementation of safe systems for ordering laboratory tests and managing results in European primary care settings. Mixed methods studies were undertaken in the UK and Ireland, and the findings were triangulated to develop 'good practice' statements. Expert consensus was then sought on the findings at the wider European level via a Delphi group meeting during 2013. We based consensus on 10 safety domains and developed 77 related 'good practice' statements (≥ 80% agreement levels) judged to be essential to creating safety and minimizing risks in laboratory test ordering and subsequent results handling systems in international primary care. Guidance was developed for improving patient safety in this important area of primary care practice. We need to consider how this guidance can be made accessible to frontline care teams, utilized by clinical educators and improvement advisers, implemented by decision makers and evaluated to determine acceptability, feasibility and impacts on patient safety.

Development and deregulation of the plum pox virus resistant transgenic plum 'HoneySweet'

USDA-ARS?s Scientific Manuscript database

We have demonstrated that genetic engineering can be an important source of high level and durable resistance against Plum pox virus (PPV). We have shown, through a number of field studies, the environmental safety of this genetically engineered plum. Nevertheless, the utilization of this demonstr...

Food safety effects of unabsorbed yolks in broilers

USDA-ARS?s Scientific Manuscript database

In the developing avian embryo, the main energy source is the yolk. Toward the end of the incubation period, the remaining yolk sac is internalized into the abdominal cavity. At hatch, the remaining yolk comprises 20% of the chick’s body weight and provides the nutrients needed for maintenance. P...

DEVELOPMENT OF A BETTER METHOD TO IDENTIFY AND MEASURE PERCHLORATE IN DRINKING WATER

EPA Science Inventory

Perchlorate (ClO4 -) is an oxidant used primarily in solid propellant for rockets, missiles, pyrotechnics, as a component in air bag inflators, and in highway safety flares. Perchlorate tainted water has been found throughout the southwestern United States where its source has o...

Safety of Pseudomonas chlororaphis as a gene source for genetically modified crops.

PubMed

Anderson, Jennifer A; Staley, Jamie; Challender, Mary; Heuton, Jamie

2018-02-01

Genetically modified crops undergo extensive evaluation to characterize their food, feed and environmental safety prior to commercial introduction, using a well-established, science-based assessment framework. One component of the safety assessment includes an evaluation of each introduced trait, including its source organism, for potential adverse pathogenic, toxic and allergenic effects. Several Pseudomonas species have a history of safe use in agriculture and certain species represent a source of genes with insecticidal properties. The ipd072Aa gene from P. chlororaphis encodes the IPD072Aa protein, which confers protection against certain coleopteran pests when expressed in maize plants. P. chlororaphis is ubiquitous in the environment, lacks known toxic or allergenic properties, and has a history of safe use in agriculture and in food and feed crops. This information supports, in part, the safety assessment of potential traits, such as IPD072Aa, that are derived from this source organism.

Global Access to Safe Water: Accounting for Water Quality and the Resulting Impact on MDG Progress

PubMed Central

Onda, Kyle; LoBuglio, Joe; Bartram, Jamie

2012-01-01

Monitoring of progress towards the Millennium Development Goal (MDG) drinking water target relies on classification of water sources as “improved” or “unimproved” as an indicator for water safety. We adjust the current Joint Monitoring Programme (JMP) estimate by accounting for microbial water quality and sanitary risk using the only-nationally representative water quality data currently available, that from the WHO and UNICEF “Rapid Assessment of Drinking Water Quality”. A principal components analysis (PCA) of national environmental and development indicators was used to create models that predicted, for most countries, the proportions of piped and of other-improved water supplies that are faecally contaminated; and of these sources, the proportions that lack basic sanitary protection against contamination. We estimate that 1.8 billion people (28% of the global population) used unsafe water in 2010. The 2010 JMP estimate is that 783 million people (11%) use unimproved sources. Our estimates revise the 1990 baseline from 23% to 37%, and the target from 12% to 18%, resulting in a shortfall of 10% of the global population towards the MDG target in 2010. In contrast, using the indicator “use of an improved source” suggests that the MDG target for drinking-water has already been achieved. We estimate that an additional 1.2 billion (18%) use water from sources or systems with significant sanitary risks. While our estimate is imprecise, the magnitude of the estimate and the health and development implications suggest that greater attention is needed to better understand and manage drinking water safety. PMID:22690170

Generation of clinical-grade human induced pluripotent stem cells in Xeno-free conditions.

PubMed

Wang, Juan; Hao, Jie; Bai, Donghui; Gu, Qi; Han, Weifang; Wang, Lei; Tan, Yuanqing; Li, Xia; Xue, Ke; Han, Pencheng; Liu, Zhengxin; Jia, Yundan; Wu, Jun; Liu, Lei; Wang, Liu; Li, Wei; Liu, Zhonghua; Zhou, Qi

2015-11-12

Human induced pluripotent stem cells (hiPSCs) are considered as one of the most promising seed cell sources in regenerative medicine. Now hiPSC-based clinical trials are underway. To ensure clinical safety, cells used in clinical trials or therapies should be generated under GMP conditions, and with Xeno-free culture media to avoid possible side effects like immune rejection that induced by the Xeno reagents. However, up to now there are no reports for hiPSC lines developed completely under GMP conditions using Xeno-free reagents. Clinical-grade human foreskin fibroblast (HFF) cells used as feeder cells and parental cells of the clinical-grade hiPSCs were isolated from human foreskin tissues and cultured in Xeno-free media. Clinical-grade hiPSCs were derived by integration-free Sendai virus-based reprogramming kit in Xeno-free pluriton™ reprogramming medium or X medium. Neural cells and cardiomyocytes differentiation were conducted following a series of spatial and temporal specific signals induction according to the corresponding lineage development signals. Biological safety evaluation of the clinical-grade HFF cells and hiPSCs were conducted following the guidance of the "Pharmacopoeia of the People's Republic of China, Edition 2010, Volume III". We have successfully derived several integration-free clinical-grade hiPSC lines under GMP-controlled conditions and with Xeno-free reagents culture media in line with the current guidance of international and national evaluation criteria. As for the source of hiPSCs and feeder cells, biological safety evaluation of the HFF cells have been strictly reviewed by the National Institutes for Food and Drug Control (NIFDC). The hiPSC lines are pluripotent and have passed the safety evaluation. Moreover, one of the randomly selected hiPSC lines was capable of differentiating into functional neural cells and cardiomyocytes in Xeno-free culture media. The clinical-grade hiPSC lines therefore could be valuable sources for future hiPSC-based clinical trials or therapies and for drug screening.

A Clinical Audit of Escorts' Awareness And Patients' Safety Following Intravenous Sedation In Adult Oral Surgery.

PubMed

Licheri, Luca; Erriu, Matteo; Bryant, Vincenzo; Piras, Vincenzo

2016-01-01

To evaluate current level of safety under the care of an escort following intravenous sedation, post-sedation arrangements and to identify potential risk levels. Information and post-sedation arrangements are important to patients'safety following surgery but although there is a general consensus over what is recommended for patients and their escorts, there is little, if any, literature on the escorts' awareness of sedation and accordance to post-sedation arrangement and recommendations. Escorts of 113 consecutive patients treated in oral surgery under sedation (midazolam) completed a questionnaire composed of 27 questions divided into seven sections including demographics, awareness of sedation, source of information and post-operative arrangement. From the data collected, two scores were calculated representative of the escorts' Safety and Reliability. Data were then analysed by ANOVA. Safety scores were statistically correlated with instruction source while Reliability correlated to a wider variety of parameters including gender, age as well as information source. Provision of clear written information to escorts is recommended as likely to improve patients' safety. Assessment of escorts' Safety and Reliability could provide a means for improving quality and safety of sedation service.

Development of the integrated control system for the microwave ion source of the PEFP 100-MeV proton accelerator

NASA Astrophysics Data System (ADS)

Song, Young-Gi; Seol, Kyung-Tae; Jang, Ji-Ho; Kwon, Hyeok-Jung; Cho, Yong-Sub

2012-07-01

The Proton Engineering Frontier Project (PEFP) 20-MeV proton linear accelerator is currently operating at the Korea Atomic Energy Research Institute (KAERI). The ion source of the 100-MeV proton linac needs at least a 100-hour operation time. To meet the goal, we have developed a microwave ion source that uses no filament. For the ion source, a remote control system has been developed by using experimental physics and the industrial control system (EPICS) software framework. The control system consists of a versa module europa (VME) and EPICS-based embedded applications running on a VxWorks real-time operating system. The main purpose of the control system is to control and monitor the operational variables of the components remotely and to protect operators from radiation exposure and the components from critical problems during beam extraction. We successfully performed the operation test of the control system to confirm the degree of safety during the hardware performance.

Beryllium10: a free and simple tool for creating and managing group safety data sheets

PubMed Central

2014-01-01

Background Countless chemicals and mixtures are used in laboratories today, which all possess their own properties and dangers. Therefore, it is important to brief oneself about possible risks and hazards before doing any experiments. However, this task is laborious and time consuming. Summary Beryllium10 is a program, which supports users by carrying out a large part of the work such as collecting/importing data sets from different providers and compiling most of the information into a single group safety data sheet, which is suitable for having all necessary information at hand while an experiment is in progress. We present here the features of Beryllium10, their implementation, and their design and development criteria and ideas. Conclusion A program for creating and managing of group safety data sheets was developed and released as open source under GPL. The program provides a fast and clear user-interface, and well-conceived design for collecting and managing safety data. It is available for download from the web page http://beryllium.keksecks.de. PMID:24650446

Laser applications and system considerations in ocular imaging

PubMed Central

Elsner, Ann E.; Muller, Matthew S.

2009-01-01

We review laser applications for primarily in vivo ocular imaging techniques, describing their constraints based on biological tissue properties, safety, and the performance of the imaging system. We discuss the need for cost effective sources with practical wavelength tuning capabilities for spectral studies. Techniques to probe the pathological changes of layers beneath the highly scattering retina and diagnose the onset of various eye diseases are described. The recent development of several optical coherence tomography based systems for functional ocular imaging is reviewed, as well as linear and nonlinear ocular imaging techniques performed with ultrafast lasers, emphasizing recent source developments and methods to enhance imaging contrast. PMID:21052482

Empirical Model Development for Predicting Shock Response on Composite Materials Subjected to Pyroshock Loading. Volume 2, Part 1; Appendices

NASA Technical Reports Server (NTRS)

Gentz, Steven J.; Ordway, David O.; Parsons, David S.; Garrison, Craig M.; Rodgers, C. Steven; Collins, Brian W.

2015-01-01

The NASA Engineering and Safety Center (NESC) received a request to develop an analysis model based on both frequency response and wave propagation analyses for predicting shock response spectrum (SRS) on composite materials subjected to pyroshock loading. The model would account for near-field environment (approximately 9 inches from the source) dominated by direct wave propagation, mid-field environment (approximately 2 feet from the source) characterized by wave propagation and structural resonances, and far-field environment dominated by lower frequency bending waves in the structure. This document contains appendices to the Volume I report.

A clinic compatible, open source electrophysiology system.

PubMed

Hermiz, John; Rogers, Nick; Kaestner, Erik; Ganji, Mehran; Cleary, Dan; Snider, Joseph; Barba, David; Dayeh, Shadi; Halgren, Eric; Gilja, Vikash

2016-08-01

Open source electrophysiology (ephys) recording systems have several advantages over commercial systems such as customization and affordability enabling more researchers to conduct ephys experiments. Notable open source ephys systems include Open-Ephys, NeuroRighter and more recently Willow, all of which have high channel count (64+), scalability, and advanced software to develop on top of. However, little work has been done to build an open source ephys system that is clinic compatible, particularly in the operating room where acute human electrocorticography (ECoG) research is performed. We developed an affordable (<; $10,000) and open system for research purposes that features power isolation for patient safety, compact and water resistant enclosures and 256 recording channels sampled up to 20ksam/sec, 16-bit. The system was validated by recording ECoG with a high density, thin film device for an acute, awake craniotomy study at UC San Diego, Thornton Hospital Operating Room.

A strategic framework for the development and enhancement of safety culture in the artificial tanning sector in Greece.

PubMed

Petri, Aspasia; Karabetsos, Efthymios

2018-06-08

Herein, the strategic framework for the development and enhancement of safety culture in the artificial tanning sector in Greece is presented. This framework has been designed and promoted by the competent national regulatory authority, which is the Greek Atomic Energy Commission (EEAE). The aim is to ensure a common understanding regarding ultraviolet radiation (UVR) and artificial tanning among the artificial tanning professionals, the stakeholders and the general public. The strategic framework is founded on the international organizations' recommendations, the EU requirements and the relevant technical standards. It is comprised of three autonomous but interconnected components: A) A sunbed operators' e-training course and certification process, B) A code of practice addressed individually to the business owners, the sunbeds operators and the sunbeds users, C) Communication strategies aiming to raise awareness regarding UVR and artificial tanning to all the interested parties. The artificial tanning safety culture framework presented here is the policy option that EEAE undertook and it is embedded in the upcoming legislation and regulations for the provision of artificial tanning services in Greece. EEAE considers that the structure of the artificial tanning safety culture strategic framework will serve as the guide for the development and promotion of relevant safety culture strategic frameworks for the provision of aesthetic/wellness services that utilize other non-ionizing radiation sources, which currently don't exist. © 2018 IOP Publishing Ltd.

Water quality associated public health risk in Bo, Sierra Leone.

PubMed

Jimmy, David H; Sundufu, Abu J; Malanoski, Anthony P; Jacobsen, Kathryn H; Ansumana, Rashid; Leski, Tomasz A; Bangura, Umaru; Bockarie, Alfred S; Tejan, Edries; Lin, Baochuan; Stenger, David A

2013-01-01

Human health depends on reliable access to safe drinking water, but in many developing countries only a limited number of wells and boreholes are available. Many of these water resources are contaminated with biological or chemical pollutants. The goal of this study was to examine water access and quality in urban Bo, Sierra Leone. A health census and community mapping project in one neighborhood in Bo identified the 36 water sources used by the community. A water sample was taken from each water source and tested for a variety of microbiological and physicochemical substances. Only 38.9% of the water sources met World Health Organization (WHO) microbial safety requirements based on fecal coliform levels. Physiochemical analysis indicated that the majority (91.7%) of the water sources met the requirements set by the WHO. In combination, 25% of these water resources met safe drinking water criteria. No variables associated with wells were statistically significant predictors of contamination. This study indicated that fecal contamination is the greatest health risk associated with drinking water. There is a need to raise hygiene awareness and implement inexpensive methods to reduce fecal contamination and improve drinking water safety in Bo, Sierra Leone.

10 CFR 34.1 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-01-01

... REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL... issuance of licenses for the use of sealed sources containing byproduct material and radiation safety requirements for persons using these sealed sources in industrial radiography. The provisions and requirements...

10 CFR 34.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL... issuance of licenses for the use of sealed sources containing byproduct material and radiation safety requirements for persons using these sealed sources in industrial radiography. The provisions and requirements...

10 CFR 34.1 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-01-01

... REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL... issuance of licenses for the use of sealed sources containing byproduct material and radiation safety requirements for persons using these sealed sources in industrial radiography. The provisions and requirements...

10 CFR 34.1 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-01-01

... REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL... issuance of licenses for the use of sealed sources containing byproduct material and radiation safety requirements for persons using these sealed sources in industrial radiography. The provisions and requirements...

10 CFR 34.1 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-01-01

... REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL... issuance of licenses for the use of sealed sources containing byproduct material and radiation safety requirements for persons using these sealed sources in industrial radiography. The provisions and requirements...

49 CFR 193.2613 - Auxiliary power sources.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Auxiliary power sources. 193.2613 Section 193.2613 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY LIQUEFIED NATURAL GAS FACILITIES...

Carbon Monoxide Safety

MedlinePlus

... portable generators? Source: National Institute of Standards and Technology More information on carbon monoxide safety Heating fire safety NFPA Educational Messages Desk Reference – these messages provide fire and ...

Correlation between safety climate and contractor safety assessment programs in construction.

PubMed

Sparer, Emily H; Murphy, Lauren A; Taylor, Kathryn M; Dennerlein, Jack T

2013-12-01

Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Four hundred and one construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers' safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. Am. J. Ind. Med. 56:1463-1472, 2013. © 2013 Wiley Periodicals, Inc. © 2013 Wiley Periodicals, Inc.

Science and technology issues in spacecraft fire safety

NASA Technical Reports Server (NTRS)

Friedman, Robert; Sacksteder, Kurt R.

1987-01-01

The space station, a permanently-inhabited orbiting laboratory, places new demands on spacecraft fire safety. Long-duration missions may call for more-constrained fire controls, but the accessibility of the space station to a variety of users may call for less-restrictive measures. This paper discusses fire safety issues through a review of the state of the art and a presentation of key findings from a recent NASA Lewis Research Center Workshop. The subjects covered are the fundamental science of low-gravity combustion and the technology advances in fire detection, extinguishment, materials assessment, and atmosphere selection. Key concerns are for the adoption of a fire-safe atmosphere and the substitution for the effective but toxic extinguishant, halon 1301. The fire safety studies and reviews provide several recommendations for further action. One is the expanded research in combustion, sensors, and materials in the low-gravity environment of space. Another is the development of generalized fire-safety standards for spacecraft through cooperative endeavors with aerospace and outside Government and industry sources.

An Overview of INEL Fusion Safety R&D Facilities

NASA Astrophysics Data System (ADS)

McCarthy, K. A.; Smolik, G. R.; Anderl, R. A.; Carmack, W. J.; Longhurst, G. R.

1997-06-01

The Fusion Safety Program at the Idaho National Engineering Laboratory has the lead for fusion safety work in the United States. Over the years, we have developed several experimental facilities to provide data for fusion reactor safety analyses. We now have four major experimental facilities that provide data for use in safety assessments. The Steam-Reactivity Measurement System measures hydrogen generation rates and tritium mobilization rates in high-temperature (up to 1200°C) fusion relevant materials exposed to steam. The Volatilization of Activation Product Oxides Reactor Facility provides information on mobilization and transport and chemical reactivity of fusion relevant materials at high temperature (up to 1200°C) in an oxidizing environment (air or steam). The Fusion Aerosol Source Test Facility is a scaled-up version of VAPOR. The ion-implanta-tion/thermal-desorption system is dedicated to research into processes and phenomena associated with the interaction of hydrogen isotopes with fusion materials. In this paper we describe the capabilities of these facilities.

Statistical, epidemiological, and risk-assessment approaches to evaluating safety of vaccines throughout the life cycle at the Food and Drug Administration.

PubMed

Ball, Robert; Horne, Dale; Izurieta, Hector; Sutherland, Andrea; Walderhaug, Mark; Hsu, Henry

2011-05-01

The public health community faces increasing demands for improving vaccine safety while simultaneously increasing the number of vaccines available to prevent infectious diseases. The passage of the US Food and Drug Administration (FDA) Amendment Act of 2007 formalized the concept of life-cycle management of the risks and benefits of vaccines, from early clinical development through many years of use in large numbers of people. Harnessing scientific and technologic advances is necessary to improve vaccine-safety evaluation. The Office of Biostatistics and Epidemiology in the Center for Biologics Evaluation and Research is working to improve the FDA's ability to monitor vaccine safety by improving statistical, epidemiologic, and risk-assessment methods, gaining access to new sources of data, and exploring the use of genomics data. In this article we describe the current approaches, new resources, and future directions that the FDA is taking to improve the evaluation of vaccine safety.

Development of a consortium for water security and safety: Planning for an early warning system

USGS Publications Warehouse

Clark, R.M.; Adam, N.R.; Atluri, V.; Halem, M.; Vowinkel, E.F.; ,

2004-01-01

The events of September 11, 2001 have raised concerns over the safety and security of the Nation's critical infrastructure including water and waste water systems. In June 2002, the U.S. EPA's Region II Office (New York City), in response to concerns over water security, in collaboration with Rutgers University agreed to establish a Regional Drinking Water Security and Safety Consortium (RDWSSC). Members of the consortium include: Rutgers University's Center for Information Management, Integration and Connectivity (CIMIC), American Water (AW), the Passaic Valley Water Commission (PVWC), the North Jersey District Water Supply Commission (NJDWSC), the N.J. Department of Environmental Protection, the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agencies, Region II Office. In December of 2002 the consortium members signed a memorandum of understanding (MOU) to pursue activities to enhance regional water security. Development of an early warning system for source and distributed water was identified as being of primary importance by the consortium. In this context, an early warning system (EWS) is an integrated system of monitoring stations located at strategic points in a water utilities source waters or in its distribution system, designed to warn against contaminants that might threaten the health and welfare of drinking water consumers. This paper will discuss the consortium's progress in achieving these important objectives.

System safety checklist Skylab program report

NASA Technical Reports Server (NTRS)

Mcnail, E. M.

1974-01-01

Design criteria statement applicable to a wide variety of flight systems, experiments and other payloads, associated ground support equipment and facility support systems are presented. The document reflects a composite of experience gained throughout the aerospace industry prior to Skylab and additional experience gained during the Skylab Program. It has been prepared to provide current and future program organizations with a broad source of safety-related design criteria and to suggest methods for systematic and progressive application of the criteria beginning with preliminary development of design requirements and specifications. Recognizing the users obligation to shape the checklist to his particular needs, a summary of the historical background, rationale, objectives, development and implementation approach, and benefits based on Skylab experience has been included.

The use of open source electronic health records within the federal safety net.

PubMed

Goldwater, Jason C; Kwon, Nancy J; Nathanson, Ashley; Muckle, Alison E; Brown, Alexa; Cornejo, Kerri

2014-01-01

To conduct a federally funded study that examines the acquisition, implementation and operation of open source electronic health records (EHR) within safety net medical settings, such as federally qualified health centers (FQHC). The study was conducted by the National Opinion Research Center (NORC) at the University of Chicago from April to September 2010. The NORC team undertook a comprehensive environmental scan, including a literature review, a dozen key informant interviews using a semistructured protocol, and a series of site visits to West Virginia, California and Arizona FQHC that were currently using an open source EHR. Five of the six sites that were chosen as part of the study found a number of advantages in the use of their open source EHR system, such as utilizing a large community of users and developers to modify their EHR to fit the needs of their provider and patient communities, and lower acquisition and implementation costs as compared to a commercial system. Despite these advantages, many of the informants and site visit participants felt that widespread dissemination and use of open source was restrained due to a negative connotation regarding this type of software. In addition, a number of participants stated that there is a necessary level of technical acumen needed within the FQHC to make an open source EHR effective. An open source EHR provides advantages for FQHC that have limited resources to acquire and implement an EHR, but additional study is needed to evaluate its overall effectiveness.

Safety and control of accelerator-driven subcritical systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rief, H.; Takahashi, H.

1995-10-01

To study control and safety of accelertor driven nuclear systems, a one point kinetic model was developed and programed. It deals with fast transients as a function of reactivity insertion. Doppler feedback, and the intensity of an external neutron source. The model allows for a simultaneous calculation of an equivalent critical reactor. It was validated by a comparison with a benchmark specified by the Nuclear Energy Agency Committee of Reactor Physics. Additional features are the possibility of inserting a linear or quadratic time dependent reactivity ramp which may account for gravity induced accidents like earthquakes, the possibility to shut downmore » the external neutron source by an exponential decay law of the form exp({minus}t/{tau}), and a graphical display of the power and reactivity changes. The calculations revealed that such boosters behave quite benignly even if they are only slightly subcritical.« less

Occupational Safety, Health, and Well-being Among Home-based Workers in the Informal Economy of Thailand.

PubMed

Nankongnab, Noppanun; Silpasuwan, Pimpan; Markkanen, Pia; Kongtip, Pornpimol; Woskie, Susan

2015-08-01

The objective of this article is to provide a summary of the issues related to occupational safety and health and well-being among workers in the informal economy of Thailand, with a special emphasis on home-based workers. The reviewed literature includes documents and information sources developed by the International Labour Organization, the National Statistical Office of Thailand, peer-reviewed scientific publications, and master's theses conducted in Thailand. This work is part of a needs and opportunities analysis carried out by the Center for Work, Environment, Nutrition and Development--a partnership between Mahidol University and University of Massachusetts Lowell to identify the gaps in knowledge and research to support government policy development in the area of occupational and environmental health for workers in the informal economy. © The Author(s) 2015.

76 FR 31507 - Domestic Licensing of Source Material-Amendments/Integrated Safety Analysis

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

... Licensing of Source Material--Amendments/Integrated Safety Analysis AGENCY: Nuclear Regulatory Commission... rule announced the availability of a draft regulatory analysis for public comment. This document... in Section XI, ``Regulatory Analysis.'' The correct ADAMS accession number is ML102380243. DATES: The...

Range Safety for an Autonomous Flight Safety System

NASA Technical Reports Server (NTRS)

Lanzi, Raymond J.; Simpson, James C.

2010-01-01

The Range Safety Algorithm software encapsulates the various constructs and algorithms required to accomplish Time Space Position Information (TSPI) data management from multiple tracking sources, autonomous mission mode detection and management, and flight-termination mission rule evaluation. The software evaluates various user-configurable rule sets that govern the qualification of TSPI data sources, provides a prelaunch autonomous hold-launch function, performs the flight-monitoring-and-termination functions, and performs end-of-mission safing

Containment system for experiments on radioactive and other hazardous materials in a Paris-Edinburgh press

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacobsen, M. K., E-mail: mjacobsen@lanl.gov; Velisavljevic, N.

2015-11-15

Recent technical developments using the large volume Paris-Edinburgh press platform have enabled x-ray synchrotron studies at high pressure and temperature conditions. However, its application to some materials of interest, such as high hazard materials that require special handling due to safety issues, reactivity, or other challenges, has not been feasible without the introduction of special containment systems to eliminate the hazards. However, introduction of a containment system is challenging due to the requirement to provide full safety containment for operation in the variety of environments available, while not hindering any of the experimental probes that are available for inert samplemore » measurement. In this work, we report on the development and implementation of a full safety enclosure for a Paris-Edinburgh type press. During the initial development and subsequent application stage of work, experiments were performed on both cerium dioxide (CeO{sub 2}) and uranium (U). This device allows for full implementation of all currently available experimental probes involving the Paris-Edinburgh press at the High Pressure Collaborative Access Team sector of the Advanced Photon Source.« less

Certification of COTS Software in NASA Human Rated Flight Systems

NASA Technical Reports Server (NTRS)

Goforth, Andre

2012-01-01

Adoption of commercial off-the-shelf (COTS) products in safety critical systems has been seen as a promising acquisition strategy to improve mission affordability and, yet, has come with significant barriers and challenges. Attempts to integrate COTS software components into NASA human rated flight systems have been, for the most part, complicated by verification and validation (V&V) requirements necessary for flight certification per NASA s own standards. For software that is from COTS sources, and, in general from 3rd party sources, either commercial, government, modified or open source, the expectation is that it meets the same certification criteria as those used for in-house and that it does so as if it were built in-house. The latter is a critical and hidden issue. This paper examines the longstanding barriers and challenges in the use of 3rd party software in safety critical systems and cover recent efforts to use COTS software in NASA s Multi-Purpose Crew Vehicle (MPCV) project. It identifies some core artifacts that without them, the use of COTS and 3rd party software is, for all practical purposes, a nonstarter for affordable and timely insertion into flight critical systems. The paper covers the first use in a flight critical system by NASA of COTS software that has prior FAA certification heritage, which was shown to meet the RTCA-DO-178B standard, and how this certification may, in some cases, be leveraged to allow the use of analysis in lieu of testing. Finally, the paper proposes the establishment of an open source forum for development of safety critical 3rd party software.

Examining the influence of urban definition when assessing relative safety of drinking-water in Nigeria.

PubMed

Christenson, Elizabeth; Bain, Robert; Wright, Jim; Aondoakaa, Stephen; Hossain, Rifat; Bartram, Jamie

2014-08-15

Reducing inequalities is a priority from a human rights perspective and in water and public health initiatives. There are periodic calls for differential national and global standards for rural and urban areas, often justified by the suggestion that, for a given water source type, safety is worse in urban areas. For instance, initially proposed post-2015 water targets included classifying urban but not rural protected dug wells as unimproved. The objectives of this study were to: (i) examine the influence of urban extent definition on water safety in Nigeria, (ii) compare the frequency of thermotolerant coliform (TTC) contamination and prevalence of sanitary risks between rural and urban water sources of a given type and (iii) investigate differences in exposure to contaminated drinking-water in rural and urban areas. We use spatially referenced data from a Nigerian national randomized sample survey of five improved water source types to assess the extent of any disparities in urban-rural safety. We combined the survey data on TTC and sanitary risk with map layers depicting urban versus rural areas according to eight urban definitions. When examining water safety separately for each improved source type, we found no significant urban-rural differences in TTC contamination and sanitary risk for groundwater sources (boreholes and protected dug wells) and inconclusive findings for piped water and stored water. However, when improved and unimproved source types were combined, TTC contamination was 1.6 to 2.3 times more likely in rural compared to urban water sources depending on the urban definition. Our results suggest that different targets for urban and rural water safety are not justified and that rural dwellers are more exposed to unsafe water than urban dwellers. Additionally, urban-rural analyses should assess multiple definitions or indicators of urban to assess robustness of findings and to characterize a gradient that disaggregates the urban-rural dichotomy. Copyright © 2014 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buchanan, J.R.; Keilholtz, G.W.

This report discusses the current status of liquid-metal fast breeder (LMFBR) development and one of the principal safety issues, a hypothetical core-disruptive accident (HCDA). Bibliographic information on worldwide LMFBRs relative to the development of the breeder reactor as a safe source of nuclear power is presented for the period 1960 through 1969. The bibliography consists of 1560 abstracts covering early research and development and operating experiences leading up to the present design practices that are necessary for the licensing of breeder reactors. Key-word, author, and permuted-title indexes are included for completeness.

Medication Development of Ibogaine as a Pharmacotherapy for Drug Dependencea.

PubMed

Mash, Deborah C; Kovera, Craig A; Buck, Billy E; Norenberg, Michael D; Shapshak, Paul; Hearn, W Lee; Sanchez-Ramos, Juan

1998-05-01

The potential for deriving new psychotherapeutic medications from natural sources has led to renewed interest in rain forest plants as a source of lead compounds for the development of antiaddiction medications. Ibogaine is an indole alkaloid found in the roots of Tabernanthe iboga (Apocynaceae family), a rain forest shrub that is native to equatorial Africa. Ibogaine is used by indigenous peoples in low doses to combat fatigue, hunger and in higher doses as a sacrament in religious rituals. Members of American and European addict self-help groups have claimed that ibogaine promotes long-term drug abstinence from addictive substances, including psychostimulants and cocaine. Anecdotal reports attest that a single dose of ibogaine eliminates withdrawal symptoms and reduces drug cravings for extended periods of time. The purported antiaddictive properties of ibogaine require rigorous validation in humans. We have initiated a rising tolerance study using single administration to assess the safety of ibogaine for the treatment of cocaine dependency. The primary objectives of the study are to determine safety, pharmacokinetics and dose effects, and to identify relevant parameters of efficacy in cocaine-dependent patients. Pharmacokinetic and pharmacodynamic characteristics of ibogaine in humans are assessed by analyzing the concentration-time data of ibogaine and its desmethyl metabolite (noribogaine) from the Phase I trial, and by conducting in vitro experiments to elucidate the specific disposition processes involved in the metabolism of both parent drug and metabolite. The development of clinical safety studies of ibogaine in humans will help to determine whether there is a rationale for conducting efficacy trials in the future.

Medication development of ibogaine as a pharmacotherapy for drug dependence.

PubMed

Mash, D C; Kovera, C A; Buck, B E; Norenberg, M D; Shapshak, P; Hearn, W L; Sanchez-Ramos, J

1998-05-30

The potential for deriving new psychotherapeutic medications from natural sources has led to renewal interest in rain forest plants as a source of lead compounds for the development of antiaddiction medications. Ibogaine is an indole alkaloid found in the roots of Tabernanthe iboga (Apocynaceae family), a rain forest shrub that is native to equatorial Africa. Ibogaine is used by indigenous peoples in low doses to combat fatigue, hunger and in higher doses as a sacrament in religious rituals. Members of American and European addict self-help groups have claimed that ibogaine promotes long-term drug abstinence from addictive substances, including psychostimulants and cocaine. Anecdotal reports attest that a single dose of ibogaine eliminates withdrawal symptoms and reduces drug cravings for extended periods of time. The purported antiaddictive properties of ibogaine require rigorous validation in humans. We have initiated a rising tolerance study using single administration to assess the safety of ibogaine for treatment of cocaine dependency. The primary objectives of the study are to determine safety, pharmacokinetics and dose effects, and to identify relevant parameters of efficacy in cocaine-dependent patients. Pharmacokinetic and pharmacodynamic characteristics of ibogaine in humans are assessed by analyzing the concentration-time data of ibogaine and its desmethyl metabolite (noribogaine) from the Phase I trial, and by conducting in vitro experiments to elucidate the specific disposition processes involved in the metabolism of both parent drug and metabolite. The development of clinical safety studies of ibogaine in humans will help to determine whether there is a rationale for conducting efficacy trials in the future.

IOT for Agriculture: Food Quality and Safety

NASA Astrophysics Data System (ADS)

Witjaksono, Gunawan; Abdelkreem Saeed Rabih, Almur; Yahya, Noorhana bt; Alva, Sagir

2018-03-01

Food is the main energy source for the living beings; as such food quality and safety have been in the highest demand throughout the human history. Internet of things (IOT) is a technology with a vision to connect anything at anytime and anywhere. Utilizing IOT in the food supply chain (FSC) is believed to enhance the quality of life by tracing and tracking the food conditions and live-sharing the obtained data with the consumers or the FSC supervisors. Currently, full application of IOT in the FSC is still in the developing stage and there is a big gap for improvements. The purpose of this paper is to explore the possibility of applying IOT for agriculture to trace and track food quality and safety. Mobile application for food freshness investigation was successfully developed and the results showed that consumer mobile camera could be used to test the freshness of food. By applying the IOT technology this information could be shared with all the consumers and also the supervisors.

Technical evaluation of the susceptibility of safety-related systems to flooding caused by the failure of non-Category I systems for Turkey Point Nuclear Power Plant, Units 3 and 4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, E.K.

1979-08-01

Three separate reviews of the Turkey Point Units 3 and 4 were conducted by the FPLCO between 1972 and 1975. Initially, at the request of NBC in 1972, the FPLCO reviewed several water systems as sources of flooding. Subsequently, as a result of an abnormal occurrence, the drainage system was reviewed. Finally, the facilities were again reviewed at NRC's request and both the potential sources of flooding and safety-related equipment which could be damaged by flooding were identified. The sources of flooding and the appropriate safety equipment are discussed. An evaluation is presented of measures that were taken by FPLCOmore » to minimize the danger of flooding and to protect safety-related equipment.« less

Level of concern and sources of information of a group of Brisbane hostelers for personal safety and terrorism when traveling abroad.

PubMed

Leggat, Peter A; Mills, Deborah; Speare, Richard

2007-01-01

Little is known about the level of concern and sources of information of hostelers concerning personal safety and terrorism. This study was designed to investigate these in the Australian context. In 2006, self-administered questionnaires were distributed to hostelers attending a travelers' information evening in Brisbane. Forty questionnaires (60.8%) were returned. Over two thirds of attendees were women (71.4%). About two thirds of the hostelers attending the travelers' information evening reported being aged 29 years or younger (64.2%). Anticipated main destinations were Europe (68.3%), Asia (14.3%), and North America (11.9%). Nearly two thirds (63.4%) intended to travel in more than 8 weeks time or were not sure. Of those departing within 8 weeks, only 40% had sought travel health advice from their general practitioner and/or travel clinic. Nonmedical sources of information on travel health included travel books and guides (40.5%), Internet (35.7%), and travel agents (19.0%). On a five-point rating scale (1 being not concerned to 5 being extremely concerned), median ratings of hostelers' concern for personal safety (4.0) was significantly higher than for terrorism (2.5), with the range being 1 to 5 in each case (p < 0.001). Nearly three quarters (73.8%) of hostelers would seek personal safety advice from multiple sources, and sources of information included the Internet (69.0%, 29), travel books and guides (59.5%), physicians (57.1%), and travel agents (45.2%). Only three (7.1%) nominated the physician as their only source of personal safety advice. Hostelers attending a travelers' information night in Australia expressed more concern for their personal safety when traveling than for terrorism. Since this group of travelers uses multiple sources of information with the Internet most commonly used, Web sites that provide accurate and relevant information in an acceptable format could play an important role in supporting this group. It is important that policies being promoted by travel health advocacy groups in Australia continue to advocate that travelers seek travel health advice from a qualified source early, preferably around 6 to 8 weeks before travel, and that personal safety be discussed as part of the travel health consultation.

Multiscale modeling and characterization for performance and safety of lithium-ion batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pannala, Sreekanth; Turner, John A.; Allu, Srikanth

Lithium-ion batteries are highly complex electrochemical systems whose performance and safety are governed by coupled nonlinear electrochemical-electrical-thermal-mechanical processes over a range of spatiotemporal scales. In this paper we describe a new, open source computational framework for Lithium-ion battery simulations that is designed to support a variety of model types and formulations. This framework has been used to create three-dimensional cell and battery pack models that explicitly simulate all the battery components (current collectors, electrodes, and separator). The models are used to predict battery performance under normal operations and to study thermal and mechanical safety aspects under adverse conditions. The modelmore » development and validation are supported by experimental methods such as IR-imaging, X-ray tomography and micro-Raman mapping.« less

Multiscale modeling and characterization for performance and safety of lithium-ion batteries

DOE PAGES

Pannala, Sreekanth; Turner, John A.; Allu, Srikanth; ...

2015-08-19

Lithium-ion batteries are highly complex electrochemical systems whose performance and safety are governed by coupled nonlinear electrochemical-electrical-thermal-mechanical processes over a range of spatiotemporal scales. In this paper we describe a new, open source computational framework for Lithium-ion battery simulations that is designed to support a variety of model types and formulations. This framework has been used to create three-dimensional cell and battery pack models that explicitly simulate all the battery components (current collectors, electrodes, and separator). The models are used to predict battery performance under normal operations and to study thermal and mechanical safety aspects under adverse conditions. The modelmore » development and validation are supported by experimental methods such as IR-imaging, X-ray tomography and micro-Raman mapping.« less

Safety impacts of bicycle infrastructure: A critical review.

PubMed

DiGioia, Jonathan; Watkins, Kari Edison; Xu, Yanzhi; Rodgers, Michael; Guensler, Randall

2017-06-01

This paper takes a critical look at the present state of bicycle infrastructure treatment safety research, highlighting data needs. Safety literature relating to 22 bicycle treatments is examined, including findings, study methodologies, and data sources used in the studies. Some preliminary conclusions related to research efficacy are drawn from the available data and findings in the research. While the current body of bicycle safety literature points toward some defensible conclusions regarding the safety and effectiveness of certain bicycle treatments, such as bike lanes and removal of on-street parking, the vast majority treatments are still in need of rigorous research. Fundamental questions arise regarding appropriate exposure measures, crash measures, and crash data sources. This research will aid transportation departments with regard to decisions about bicycle infrastructure and guide future research efforts toward understanding safety impacts of bicycle infrastructure. Copyright © 2017 Elsevier Ltd and National Safety Council. All rights reserved.

Diagnosing turbulence for research aircraft safety using open source toolkits

NASA Astrophysics Data System (ADS)

Lang, T. J.; Guy, N.

Open source software toolkits have been developed and applied to diagnose in-cloud turbulence in the vicinity of Earth science research aircraft, via analysis of ground-based Doppler radar data. Based on multiple retrospective analyses, these toolkits show promise for detecting significant turbulence well prior to cloud penetrations by research aircraft. A pilot study demonstrated the ability to provide mission scientists turbulence estimates in near real time during an actual field campaign, and thus these toolkits are recommended for usage in future cloud-penetrating aircraft field campaigns.

A novel integrated approach for the hazardous radioactive dust source terms estimation in future nuclear fusion power plants.

PubMed

Poggi, L A; Malizia, A; Ciparisse, J F; Gaudio, P

2016-10-01

An open issue still under investigation by several international entities working on the safety and security field for the foreseen nuclear fusion reactors is the estimation of source terms that are a hazard for the operators and public, and for the machine itself in terms of efficiency and integrity in case of severe accident scenarios. Source term estimation is a crucial key safety issue to be addressed in the future reactors safety assessments, and the estimates available at the time are not sufficiently satisfactory. The lack of neutronic data along with the insufficiently accurate methodologies used until now, calls for an integrated methodology for source term estimation that can provide predictions with an adequate accuracy. This work proposes a complete methodology to estimate dust source terms starting from a broad information gathering. The wide number of parameters that can influence dust source term production is reduced with statistical tools using a combination of screening, sensitivity analysis, and uncertainty analysis. Finally, a preliminary and simplified methodology for dust source term production prediction for future devices is presented.

Technical Manual for Batteries, Navy Lithium Safety Program Responsibilities and Procedures

DTIC Science & Technology

2004-08-19

lithium ion batteries and all equipment powered by lithium electrochemical power source(s) through all phases of the life of such systems. The purpose of this manual is to establish safety guidelines for the selection, design, testing, evaluation, use, packaging, storage, transportation and disposal of lithium

76 FR 44865 - Domestic Licensing of Source Material-Amendments/Integrated Safety Analysis

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-27

... NUCLEAR REGULATORY COMMISSION 10 CFR Part 40 RIN 3150-AI50 [NRC-2009-0079 and NRC-2011-0080] Domestic Licensing of Source Material--Amendments/Integrated Safety Analysis AGENCY: Nuclear Regulatory Commission. ACTION: Extension of public comment period and public meeting. SUMMARY: The U.S. Nuclear...

How Companies Respond to New Safety Regulations: A Canadian Investigation.

ERIC Educational Resources Information Center

Saari, J.; And Others

1993-01-01

A study of safety training programs in 66 Canadian companies found that those who provided tailor-made training already offered better working conditions, greater management involvement in safety work, and more safety activities than those who used outside training sources. This suggests that safety regulations benefit good companies more than…

People-Technology-Ecosystem Integration: A Framework to Ensure Regional Interoperability for Safety, Sustainability, and Resilience of Interdependent Energy, Water, and Seafood Sources in the (Persian) Gulf.

PubMed

Meshkati, Najmedin; Tabibzadeh, Maryam; Farshid, Ali; Rahimi, Mansour; Alhanaee, Ghena

2016-02-01

The aim of this study is to identify the interdependencies of human and organizational subsystems of multiple complex, safety-sensitive technological systems and their interoperability in the context of sustainability and resilience of an ecosystem. Recent technological disasters with severe environmental impact are attributed to human factors and safety culture causes. One of the most populous and environmentally sensitive regions in the world, the (Persian) Gulf, is on the confluence of an exponentially growing number of two industries--nuclear power and seawater desalination plants--that is changing its land- and seascape. Building upon Rasmussen's model, a macrosystem integrative framework, based on the broader context of human factors, is developed, which can be considered in this context as a "meta-ergonomics" paradigm, for the analysis of interactions, design of interoperability, and integration of decisions of major actors whose actions can affect safety and sustainability of the focused industries during routine and nonroutine (emergency) operations. Based on the emerging realities in the Gulf region, it is concluded that without such systematic approach toward addressing the interdependencies of water and energy sources, sustainability will be only a short-lived dream and prosperity will be a disappearing mirage for millions of people in the region. This multilayered framework for the integration of people, technology, and ecosystem--which has been applied to the (Persian) Gulf--offers a viable and vital approach to the design and operation of large-scale complex systems wherever the nexus of water, energy, and food sources are concerned, such as the Black Sea. © 2016, Human Factors and Ergonomics Society.

Large-scale combining signals from both biomedical literature and the FDA Adverse Event Reporting System (FAERS) to improve post-marketing drug safety signal detection

PubMed Central

2014-01-01

Background Independent data sources can be used to augment post-marketing drug safety signal detection. The vast amount of publicly available biomedical literature contains rich side effect information for drugs at all clinical stages. In this study, we present a large-scale signal boosting approach that combines over 4 million records in the US Food and Drug Administration (FDA) Adverse Event Reporting System (FAERS) and over 21 million biomedical articles. Results The datasets are comprised of 4,285,097 records from FAERS and 21,354,075 MEDLINE articles. We first extracted all drug-side effect (SE) pairs from FAERS. Our study implemented a total of seven signal ranking algorithms. We then compared these different ranking algorithms before and after they were boosted with signals from MEDLINE sentences or abstracts. Finally, we manually curated all drug-cardiovascular (CV) pairs that appeared in both data sources and investigated whether our approach can detect many true signals that have not been included in FDA drug labels. We extracted a total of 2,787,797 drug-SE pairs from FAERS with a low initial precision of 0.025. The ranking algorithm combined signals from both FAERS and MEDLINE, significantly improving the precision from 0.025 to 0.371 for top-ranked pairs, representing a 13.8 fold elevation in precision. We showed by manual curation that drug-SE pairs that appeared in both data sources were highly enriched with true signals, many of which have not yet been included in FDA drug labels. Conclusions We have developed an efficient and effective drug safety signal ranking and strengthening approach We demonstrate that large-scale combining information from FAERS and biomedical literature can significantly contribute to drug safety surveillance. PMID:24428898

Large-scale combining signals from both biomedical literature and the FDA Adverse Event Reporting System (FAERS) to improve post-marketing drug safety signal detection.

PubMed

Xu, Rong; Wang, QuanQiu

2014-01-15

Independent data sources can be used to augment post-marketing drug safety signal detection. The vast amount of publicly available biomedical literature contains rich side effect information for drugs at all clinical stages. In this study, we present a large-scale signal boosting approach that combines over 4 million records in the US Food and Drug Administration (FDA) Adverse Event Reporting System (FAERS) and over 21 million biomedical articles. The datasets are comprised of 4,285,097 records from FAERS and 21,354,075 MEDLINE articles. We first extracted all drug-side effect (SE) pairs from FAERS. Our study implemented a total of seven signal ranking algorithms. We then compared these different ranking algorithms before and after they were boosted with signals from MEDLINE sentences or abstracts. Finally, we manually curated all drug-cardiovascular (CV) pairs that appeared in both data sources and investigated whether our approach can detect many true signals that have not been included in FDA drug labels. We extracted a total of 2,787,797 drug-SE pairs from FAERS with a low initial precision of 0.025. The ranking algorithm combined signals from both FAERS and MEDLINE, significantly improving the precision from 0.025 to 0.371 for top-ranked pairs, representing a 13.8 fold elevation in precision. We showed by manual curation that drug-SE pairs that appeared in both data sources were highly enriched with true signals, many of which have not yet been included in FDA drug labels. We have developed an efficient and effective drug safety signal ranking and strengthening approach We demonstrate that large-scale combining information from FAERS and biomedical literature can significantly contribute to drug safety surveillance.

A holistic approach to food safety risks: Food fraud as an example.

PubMed

Marvin, Hans J P; Bouzembrak, Yamine; Janssen, Esmée M; van der Fels-Klerx, H J; van Asselt, Esther D; Kleter, Gijs A

2016-11-01

Production of sufficient, safe and nutritious food is a global challenge faced by the actors operating in the food production chain. The performance of food-producing systems from farm to fork is directly and indirectly influenced by major changes in, for example, climate, demographics, and the economy. Many of these major trends will also drive the development of food safety risks and thus will have an effect on human health, local societies and economies. It is advocated that a holistic or system approach taking into account the influence of multiple "drivers" on food safety is followed to predict the increased likelihood of occurrence of safety incidents so as to be better prepared to prevent, mitigate and manage associated risks. The value of using a Bayesian Network (BN) modelling approach for this purpose is demonstrated in this paper using food fraud as an example. Possible links between food fraud cases retrieved from the RASFF (EU) and EMA (USA) databases and features of these cases provided by both the records themselves and additional data obtained from other sources are demonstrated. The BN model was developed from 1393 food fraud cases and 15 different data sources. With this model applied to these collected data on food fraud cases, the product categories that thus showed the highest probabilities of being fraudulent were "fish and seafood" (20.6%), "meat" (13.4%) and "fruits and vegetables" (10.4%). Features of the country of origin appeared to be important factors in identifying the possible hazards associated with a product. The model had a predictive accuracy of 91.5% for the fraud type and demonstrates how expert knowledge and data can be combined within a model to assist risk managers to better understand the factors and their interrelationships. Copyright © 2016 Elsevier Ltd. All rights reserved.

STWIR, a microorganism transport with infiltration and runoff add-on module for the KINEROS2 runoff and erosion model: documentation and user manual

USDA-ARS?s Scientific Manuscript database

Runoff from manured fields is often considered to be the source of microorganisms in the surface water used for irrigation, recreation, and household needs. Concerns about microbial safety of this water resulted in development of predictive models for estimating the concentrations and total numbers ...

Line-scan macro-scale Raman chemical imaging for authentication of powdered foods and ingredients

USDA-ARS?s Scientific Manuscript database

Adulteration and fraud for powdered foods and ingredients are rising food safety risks that threaten consumers’ health. In this study, a newly developed line-scan macro-scale Raman imaging system using a 5 W 785 nm line laser as excitation source was used to authenticate the food powders. The system...

Line-scan spatially offset Raman spectroscopy for inspecting subsurface food safety and quality

USDA-ARS?s Scientific Manuscript database

This paper presented a method for subsurface food inspection using a newly developed line-scan spatially offset Raman spectroscopy (SORS) technique. A 785 nm laser was used as a Raman excitation source. The line-shape SORS data was collected in a wavenumber range of 0–2815 cm-1 using a detection mod...

KINETICS OF LOW SOURCE REACTOR STARTUPS. PART I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hurwitz, H. Jr.; MacMillan, D.B.; Smith, J.H.

1962-06-01

Statistical fluctuntions of neutron populations in reactors are analyzed by means of an approximate theoretical model. Development of the model is given in detail; also included are extensive numerical results derived from its application to systems with time-dependent reactivity, namely, a reactor during start-up. The special relationships of fluctuations to safety considerations are discussed. (auth)

Patient and Physician Perceptions of Drug Safety Information for Sleep Aids: A Qualitative Study.

PubMed

Kesselheim, Aaron S; McGraw, Sarah A; Dejene, Sara Z; Rausch, Paula; Dal Pan, Gerald J; Lappin, Brian M; Zhou, Esther H; Avorn, Jerry; Campbell, Eric G

2017-06-01

The US Food and Drug Administration uses drug safety communications (DSCs) to release emerging information regarding post-market safety issues, but it is unclear the extent of awareness by patients and providers of these communications and their specific recommendations. We conducted semi-structured interviews with patients and physicians to evaluate their awareness and understanding of emerging drug safety information related to two sleep aids: zolpidem or eszopiclone. We conducted interviews with 40 patients and ten physicians recruited from a combination of insurer claims databases and online sources. We evaluated (1) sources of drug safety information; (2) discussions between patients and physicians about the two medications; (3) their knowledge of the DSC; and (4) preferences for learning about future drug safety information. Interviews were transcribed and analyzed thematically. Patients cited their physicians, pharmacy inserts, and the Internet as sources of drug safety information. Physicians often referred to medical journals and online medical sources. Most patients reported being aware of information contained in the DSC summaries they were read. Almost all patients and physicians reported discussing side effects during patient-provider conversations, but almost no patients mentioned that physicians had communicated with them key messaging from the DSCs at issue: the risk of next-morning impairment with zolpidem and the lower recommended initial dose for women. Some risks of medications are effectively communicated to patients and physicians; however, there is still a noticeable gap between information issued by the Food and Drug Administration and patient and physician awareness of this knowledge, as well as patients' decisions to act on this information. Disseminators of emerging drug safety information should explore ways of providing user-friendly resources to patients and healthcare professionals that can update them on new risks in a timely manner.

Systems Analysis of NASA Aviation Safety Program: Final Report

NASA Technical Reports Server (NTRS)

Jones, Sharon M.; Reveley, Mary S.; Withrow, Colleen A.; Evans, Joni K.; Barr, Lawrence; Leone, Karen

2013-01-01

A three-month study (February to April 2010) of the NASA Aviation Safety (AvSafe) program was conducted. This study comprised three components: (1) a statistical analysis of currently available civilian subsonic aircraft data from the National Transportation Safety Board (NTSB), the Federal Aviation Administration (FAA), and the Aviation Safety Information Analysis and Sharing (ASIAS) system to identify any significant or overlooked aviation safety issues; (2) a high-level qualitative identification of future safety risks, with an assessment of the potential impact of the NASA AvSafe research on the National Airspace System (NAS) based on these risks; and (3) a detailed, top-down analysis of the NASA AvSafe program using an established and peer-reviewed systems analysis methodology. The statistical analysis identified the top aviation "tall poles" based on NTSB accident and FAA incident data from 1997 to 2006. A separate examination of medical helicopter accidents in the United States was also conducted. Multiple external sources were used to develop a compilation of ten "tall poles" in future safety issues/risks. The top-down analysis of the AvSafe was conducted by using a modification of the Gibson methodology. Of the 17 challenging safety issues that were identified, 11 were directly addressed by the AvSafe program research portfolio.

Development of requirements on safety cases of machine industry products for power engineering

NASA Astrophysics Data System (ADS)

Aronson, K. E.; Brezgin, V. I.; Brodov, Yu. M.; Gorodnova, N. V.; Kultyshev, A. Yu.; Tolmachev, V. V.; Shablova, E. G.

2016-12-01

This article considers security assurance for power engineering machinery in the design and production phases. The Federal Law "On Technical Regulation" and the Customs Union Technical Regulations "On Safety of Machinery and Equipment" are analyzed in the legal, technical, and economic aspect with regard to power engineering machine industry products. From the legal standpoint, it is noted that the practical enforcement of most norms of the Law "On Technical Regulation" makes it necessary to adopt subordinate statutory instruments currently unavailable; moreover, the current level of adoption of technical regulations leaves much to be desired. The intensive integration processes observed in the Eurasian Region in recent years have made it a more pressing task to harmonize the laws of the region's countries, including their technical regulation framework. The technical aspect of analyzing the technical regulation of the Customs Union has been appraised by the IDEF0 functional modeling method. The object of research is a steam turbine plant produced at the turbine works. When developing the described model, we considered the elaboration of safety case (SC) requirements from the standpoint of the chief designer of the turbine works as the person generally responsible for the elaboration of the SC document. The economic context relies on risk analysis and appraisal methods. In their respect, these are determined by the purposes and objectives of analysis, complexity of considered objects, availability of required data, and expertise of specialists hired to conduct the analysis. The article proposes the description of all sources of hazard and scenarios of their actualization in all production phases of machinery life cycle for safety assurance purposes. The detection of risks and hazards allows forming the list of unwanted events. It describes the sources of hazard, various risk factors, conditions for their rise and development, tentative risk appraisals, and elaboration of tentative guidelines for reducing hazard and risk levels.

[Stress management in large-scale establishments].

PubMed

Fukasawa, Kenji

2002-07-01

Due to a recent dramatic change in industrial structures in Japan, the role of large-scale enterprises is changing. Mass production used to be the major income sources of companies, but nowadays it has changed to high value-added products, including, software development. As a consequence of highly competitive inter-corporate development, there are various sources of job stress which induce health problems in employees, especially those concerned with development or management. To simply to obey the law or offer medical care are not enough to achieve management of these problems. Occupational health staff need to act according to the disease type and provide care with support from the Supervisor and Personnel Division. And for the training, development and consultation system, occupational health staff must work with the Personnel Division and Safety Division, and be approved by management supervisors.

Prevalence, source and severity of work-related injuries among "foreign" construction workers in a large Malaysian organisation: a cross-sectional study.

PubMed

Zerguine, Haroun; Tamrin, Shamsul Bahri Mohd; Jalaludin, Juliana

2018-06-01

Malaysian construction sector is regarded as critical in the field of health because of the high rates of accidents and fatalities. This research aimed to determine the prevalence, sources and severity of injuries and its association with commitment to safety among foreign construction workers. A cross-sectional study was conducted among 323 foreign construction workers from six construction projects of a large organization in Malaysia, using a simple random sampling method. Data was collected using a structured questionnaire to assess work-related injuries and safety commitment. The collected data was analysed by SPSS 22.0 using descriptive statistics and χ 2 test. The prevalence of work-related injuries in a one year period was 22.6%, where most of the injuries were of moderate severity (39.7%) and falls from heights represented the main source (31.5%). The majority of the foreign construction workers had perceived between moderate and high safety commitment, which was significantly associated with work-related injuries. The results also showed a significant association of work-related injuries with the company's interest in Safety and Health, Safety and Health training, and safety equipment. Thus, the implementation of new procedures and providing relevant trainings and safety equipment; will lead to a decrease in injury rates in construction sites.

Reassuring or risky: the presentation of seafood safety in the aftermath of the British Petroleum Deepwater Horizon Oil Spill.

PubMed

Greiner, Amelia L; Lagasse, Lisa P; Neff, Roni A; Love, David C; Chase, Rachel; Sokol, Natasha; Smith, Katherine Clegg

2013-07-01

The BP Deepwater Horizon Oil Spill was enormously newsworthy; coverage interlaced discussions of health, economic, and environmental impacts and risks. We analyzed 315 news articles that considered Gulf seafood safety from the year following the spill. We explored reporting trends, risk presentation, message source, stakeholder perspectives on safety, and framing of safety messages. Approximately one third of articles presented risk associated with seafood consumption as a standalone issue, rather than in conjunction with environmental or economic risks. Government sources were most frequent and their messages were largely framed as reassuring as to seafood safety. Discussions of prevention were limited to short-term, secondary prevention approaches. These data demonstrate a need for risk communication in news coverage of food safety that addresses the larger risk context, primary prevention, and structural causes of risk.

A Unique Hybrid Quasi-Solid-State Electrolyte for Li-O2 Batteries with Improved Cycle Life and Safety.

PubMed

Yi, Jin; Zhou, Haoshen

2016-09-08

In the context of the development of electric vehicle to solve the contemporary energy and environmental issues, the possibility of pushing future application of Li-O2 batteries as a power source for electric vehicles is particularly attractive. However, safety concerns, mainly derived from the use of flammable organic liquid electrolytes, become a major bottleneck for the strategically crucial applications of Li-O2 batteries. To overcome this issue, rechargeable solid-state Li-O2 batteries with enhanced safety is regarded as an appealing candidate. In this study, a hybrid quasi-solid-state electrolyte combing a polymer electrolyte with a ceramic electrolyte is first designed and explored for Li-O2 batteries. The proposed rechargeable solid-state Li-O2 battery delivers improved cycle life (>100 cycles) and safety. The feasibility study demonstrates that the hybrid quasi-solid-state electrolytes could be employed as a promising alternative strategy for the development of rechargeable Li-O2 batteries, hence encouraging more efforts devoted to explore other hybrid solid-state electrolytes for Li-O2 batteries upon future application. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Achievements in the development of the Water Cooled Solid Breeder Test Blanket Module of Japan to the milestones for installation in ITER

NASA Astrophysics Data System (ADS)

Tsuru, Daigo; Tanigawa, Hisashi; Hirose, Takanori; Mohri, Kensuke; Seki, Yohji; Enoeda, Mikio; Ezato, Koichiro; Suzuki, Satoshi; Nishi, Hiroshi; Akiba, Masato

2009-06-01

As the primary candidate of ITER Test Blanket Module (TBM) to be tested under the leadership of Japan, a water cooled solid breeder (WCSB) TBM is being developed. This paper shows the recent achievements towards the milestones of ITER TBMs prior to the installation, which consist of design integration in ITER, module qualification and safety assessment. With respect to the design integration, targeting the detailed design final report in 2012, structure designs of the WCSB TBM and the interfacing components (common frame and backside shielding) that are placed in a test port of ITER and the layout of the cooling system are presented. As for the module qualification, a real-scale first wall mock-up fabricated by using the hot isostatic pressing method by structural material of reduced activation martensitic ferritic steel, F82H, and flow and irradiation test of the mock-up are presented. As for safety milestones, the contents of the preliminary safety report in 2008 consisting of source term identification, failure mode and effect analysis (FMEA) and identification of postulated initiating events (PIEs) and safety analyses are presented.

A nutribusiness strategy for processing and marketing animal-source foods for children.

PubMed

Mills, Edward W; Seetharaman, Koushik; Maretzki, Audrey N

2007-04-01

Nutritional benefits of animal source foods in the diets of children in developing countries indicate a need to increase the availability of such foods to young children. A nutribusiness strategy based on a dried meat and starch product could be used to increase children's access to such foods. The "Chiparoo" was developed at The Pennsylvania State University with this objective in mind. Plant-based and meat ingredients of the Chiparoo are chosen based on regional availability and cultural acceptability. Chiparoo processing procedures, including solar drying, are designed to ensure product safety and to provide product properties that allow them to be eaten as a snack or crumbled into a weaning porridge. Continued work is needed to develop formulation and processing variations that accommodate the needs of cultures around the world.

Advances in energy technology; Proceedings of the Eighth Annual UMR-DNR Conference on Energy, University of Missouri-Rolla, Rolla, MO, November 4-7, 1981

NASA Astrophysics Data System (ADS)

Sauer, H. J., Jr.; Hegler, B. E.

1982-11-01

Papers on various topics of energy conservation, new passive solar heating and storage devices, governmental particiaption in developing energy technologies, and the development of diverse energy sources and safety features are presented. Attention is given to recent shifts in the federal and state goverenment roles in energy research, development and economic incentives. The applications of passive solar walls, flat plate collectors and trombe walls as retorfits for houses, institutions, and industries were examined. Attention was given to the implementation of wind power by a zoo and the use of spoilers as speed control devices in a Darrieus wind turbine. Aspects of gasohol, coal, synfuel, and laser-pyrolyzed coal products use are investigated. Finally, the economic, social, and political factors influencing energy system selection are explored, togeter with conservation practices in housing, government, and industry, and new simulators for enhancing nuclear power plant safety.

Evaluation of criteria for developing traffic safety materials for Latinos.

PubMed

Streit-Kaplan, Erica L; Miara, Christine; Formica, Scott W; Gallagher, Susan Scavo

2011-03-01

This quantitative study assessed the validity of guidelines that identified four key characteristics of culturally appropriate Spanish-language traffic safety materials: language, translation, formative evaluation, and credible source material. From a sample of 190, the authors randomly selected 12 Spanish-language educational materials for analysis by 15 experts. Hypotheses included that the experts would rate materials with more of the key characteristics as more effective (likely to affect behavioral change) and rate materials originally developed in Spanish and those that utilized formative evaluation (e.g., pilot tests, focus groups) as more culturally appropriate. Although results revealed a weak association between the number of key characteristics in a material and the rating of its effectiveness, reviewers rated materials originally created in Spanish and those utilizing formative evaluation as significantly more culturally appropriate. The findings and methodology demonstrated important implications for developers and evaluators of any health-related materials for Spanish speakers and other population groups.

30 CFR 250.1630 - Safety-system testing and records.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Sulphur Operations § 250.1630 Safety... components, and the following: (1) Safety relief valves on the natural gas feed system for power plant... source. (2) The following safety devices (excluding electronic pressure transmitters and level sensors...

Safety Communication Tools and Healthcare Professionals' Awareness of Specific Drug Safety Issues in Europe: A Survey Study.

PubMed

de Vries, Sieta T; van der Sar, Maartje J M; Coleman, Anna Marie; Escudero, Yvette; Rodríguez Pascual, Alfonso; Maciá Martínez, Miguel-Ángel; Cupelli, Amelia; Baldelli, Ilaria; Šipić, Ivana; Andrić, Adriana; Michan, Line; Denig, Petra; Mol, Peter G M

2018-07-01

National competent authorities (NCAs) use Direct Healthcare Professional Communications (DHPCs) to communicate new drug safety issues to healthcare professionals (HCPs). More knowledge is needed about the effectiveness of DHPCs and the extent to which they raise awareness of new safety issues among HCPs. The objective was to assess and compare general practitioners' (GPs'), cardiologists', and pharmacists' familiarity with DHPCs as communication tools, their awareness of specific drug safety issues, and the sources through which they had become aware of the specific issues. GPs, cardiologists, and pharmacists from nine European countries (Croatia, Denmark, Ireland, Italy, the Netherlands, Norway, Spain, Sweden, and the UK) completed a web-based survey. The survey was conducted in the context of the Strengthening Collaboration for Operating Pharmacovigilance in Europe (SCOPE) Joint Action. Respondents were asked about their familiarity with DHPCs in general and their awareness of safety issues that had recently been communicated and involved the following drugs: combined hormonal contraceptives, diclofenac, valproate, and ivabradine. Those HCPs who were aware of the specific safety issues were subsequently asked to indicate the source through which they had become aware of them. Differences between professions in familiarity with DHPCs and awareness were tested using a Pearson χ 2  test per country and post hoc Pearson χ 2  tests in the case of statistically significant differences. Of the 3288 included respondents, 54% were GPs, 40% were pharmacists, and 7% were cardiologists. The number of respondents ranged from 67 in Denmark to 916 in Spain. Most respondents (92%) were familiar with DHPCs, with one significant difference between the professions: pharmacists were more familiar than GPs in Italy (99 vs 90%, P = 0.004). GPs' awareness ranged from 96% for the diclofenac issue to 70% for the ivabradine issue. A similar pattern was shown for pharmacists (91% aware of the diclofenac issue to 66% of the ivabradine issue). Cardiologists' awareness ranged from 91% for the ivabradine issue to 34% for the valproate issue. Overall, DHPCs were a common source through which GPs (range: 45% of those aware of the contraceptives issue to 60% of those aware of the valproate issue), cardiologists (range: 33% for the contraceptives issue to 61% for the valproate issue), and pharmacists (range: 41% for the contraceptives issue to 51% for the ivabradine issue) had become aware of the specific safety issues, followed by information on websites or in newsletters. GPs, cardiologists, and pharmacists were to a similar extent (highly) familiar with DHPCs, but they differed in awareness levels of specific safety issues. Cardiologists were less aware of safety issues associated with non-cardiology drugs even if these had cardiovascular safety concerns. This implies that additional strategies may be needed to reach specialists when communicating safety issues regarding drugs outside their therapeutic area but with risks related to their field of specialisation. DHPCs were an important source for the different professions to become aware of specific safety issues, but other sources were also often used. NCAs should consider the use of a range of sources when communicating important safety issues to HCPs.

Characterization of a new dosimeter for the development of a position-sensitive detector of radioactive sources in industrial NDT equipment

NASA Astrophysics Data System (ADS)

Kim, K. T.; Kim, J. H.; Han, M. J.; Heo, Y. J.; Park, S. K.

2018-02-01

Imaging technology based on gamma-ray sources has been extensively used in non-destructive testing (NDT) to detect any possible internal defects in products without changing their shapes or functions. However, such technology has been subject to increasingly stricter regulations, and an international radiation-safety management system has been recently established. Consequently, radiation source location in NDT systems has become an essential process, given that it can prevent radiation accidents. In this study, we focused on developing a monitoring system that can detect, in real time, the position of a radioactive source in the source guide tube of a projector. We fabricated a lead iodide (PbI2) dosimeter based on the particle-in-binder method, which has a high production yield and facilitates thickness and shape adjustment. Using a gamma-ray source, we then tested the reproducibility, linearity of the dosimeter response, and the dosimeter's percentage interval distance (PID). It was found that the fabricated PbI2 dosimeter yields highly accurate, reproducible, and linear dose measurements. The PID analysis—conducted to investigate the possibility of developing a monitoring system based on the proposed dosimeter—indicated that the valid detection distance was approximately 11.3 cm. The results of this study are expected to contribute to the development of an easily usable radiation monitoring system capable of significantly reducing the risk of radiation accidents.

An Open Source Rapid Computer Aided Control System Design Toolchain Using Scilab, Scicos and RTAI Linux

NASA Astrophysics Data System (ADS)

Bouchpan-Lerust-Juéry, L.

2007-08-01

Current and next generation on-board computer systems tend to implement real-time embedded control applications (e.g. Attitude and Orbit Control Subsystem (AOCS), Packet Utililization Standard (PUS), spacecraft autonomy . . . ) which must meet high standards of Reliability and Predictability as well as Safety. All these requirements require a considerable amount of effort and cost for Space Sofware Industry. This paper, in a first part, presents a free Open Source integrated solution to develop RTAI applications from analysis, design, simulation and direct implementation using code generation based on Open Source and in its second part summarises this suggested approach, its results and the conclusion for further work.

The use of open source electronic health records within the federal safety net

PubMed Central

Goldwater, Jason C; Kwon, Nancy J; Nathanson, Ashley; Muckle, Alison E; Brown, Alexa; Cornejo, Kerri

2014-01-01

Objective To conduct a federally funded study that examines the acquisition, implementation and operation of open source electronic health records (EHR) within safety net medical settings, such as federally qualified health centers (FQHC). Methods and materials The study was conducted by the National Opinion Research Center (NORC) at the University of Chicago from April to September 2010. The NORC team undertook a comprehensive environmental scan, including a literature review, a dozen key informant interviews using a semistructured protocol, and a series of site visits to West Virginia, California and Arizona FQHC that were currently using an open source EHR. Results Five of the six sites that were chosen as part of the study found a number of advantages in the use of their open source EHR system, such as utilizing a large community of users and developers to modify their EHR to fit the needs of their provider and patient communities, and lower acquisition and implementation costs as compared to a commercial system. Discussion Despite these advantages, many of the informants and site visit participants felt that widespread dissemination and use of open source was restrained due to a negative connotation regarding this type of software. In addition, a number of participants stated that there is a necessary level of technical acumen needed within the FQHC to make an open source EHR effective. Conclusions An open source EHR provides advantages for FQHC that have limited resources to acquire and implement an EHR, but additional study is needed to evaluate its overall effectiveness. PMID:23744787

A qualitative exploration of the perceptions and information needs of public health inspectors responsible for food safety

PubMed Central

2010-01-01

Background In Ontario, local public health inspectors play an important frontline role in protecting the public from foodborne illness. This study was an in-depth exploration of public health inspectors' perceptions of the key food safety issues in public health, and their opinions and needs with regards to food safety information resources. Methods Four focus group discussions were conducted with public health inspectors from the Central West region of Ontario, Canada during June and July, 2008. A questioning route was used to standardize qualitative data collection. Audio recordings of sessions were transcribed verbatim and data-driven content analysis was performed. Results A total of 23 public health inspectors participated in four focus group discussions. Five themes emerged as key food safety issues: time-temperature abuse, inadequate handwashing, cross-contamination, the lack of food safety knowledge by food handlers and food premise operators, and the lack of food safety information and knowledge about specialty foods (i.e., foods from different cultures). In general, participants reported confidence with their current knowledge of food safety issues and foodborne pathogens. Participants highlighted the need for a central source for food safety information, access to up-to-date food safety information, resources in different languages, and additional food safety information on specialty foods. Conclusions The information gathered from these focus groups can provide a basis for the development of resources that will meet the specific needs of public health inspectors involved in protecting and promoting food safety. PMID:20553592

Management of Ultimate Risk of Nuclear Power Plants by Source Terms - Lessons Learned from the Chernobyl Accident

DOE Office of Scientific and Technical Information (OSTI.GOV)

Genn Saji

2006-07-01

The term 'ultimate risk' is used here to describe the probabilities and radiological consequences that should be incorporated in siting, containment design and accident management of nuclear power plants for hypothetical accidents. It is closely related with the source terms specified in siting criteria which assures an adequate separation of radioactive inventories of the plants from the public, in the event of a hypothetical and severe accident situation. The author would like to point out that current source terms which are based on the information from the Windscale accident (1957) through TID-14844 are very outdated and do not incorporate lessonsmore » learned from either the Three Miles Island (TMI, 1979) nor Chernobyl accident (1986), two of the most severe accidents ever experienced. As a result of the observations of benign radionuclides released at TMI, the technical community in the US felt that a more realistic evaluation of severe reactor accident source terms was necessary. In this background, the 'source term research project' was organized in 1984 to respond to these challenges. Unfortunately, soon after the time of the final report from this project was released, the Chernobyl accident occurred. Due to the enormous consequences induced by then accident, the one time optimistic perspectives in establishing a more realistic source term were completely shattered. The Chernobyl accident, with its human death toll and dispersion of a large part of the fission fragments inventories into the environment, created a significant degradation in the public's acceptance of nuclear energy throughout the world. In spite of this, nuclear communities have been prudent in responding to the public's anxiety towards the ultimate safety of nuclear plants, since there still remained many unknown points revolving around the mechanism of the Chernobyl accident. In order to resolve some of these mysteries, the author has performed a scoping study of the dispersion and deposition mechanisms of fuel particles and fission fragments during the initial phase of the Chernobyl accident. Through this study, it is now possible to generally reconstruct the radiological consequences by using a dispersion calculation technique, combined with the meteorological data at the time of the accident and land contamination densities of {sup 137}Cs measured and reported around the Chernobyl area. Although it is challenging to incorporate lessons learned from the Chernobyl accident into the source term issues, the author has already developed an example of safety goals by incorporating the radiological consequences of the accident. The example provides safety goals by specifying source term releases in a graded approach in combination with probabilities, i.e. risks. The author believes that the future source term specification should be directly linked with safety goals. (author)« less

10 CFR 35.415 - Safety precautions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Safety precautions. 35.415 Section 35.415 Energy NUCLEAR REGULATORY COMMISSION MEDICAL USE OF BYPRODUCT MATERIAL Manual Brachytherapy § 35.415 Safety precautions. (a... following removal of the source applicators. (c) A licensee shall notify the Radiation Safety Officer, or...

School Safety Gets the Ax

ERIC Educational Resources Information Center

Eisele-Dyrli, Kurt

2010-01-01

A new informal federal survey has found that for many districts, budget cuts have had a profound effect on school safety and security measures. Administrators have been forced to cut safety and security staffing and programs, reorganize security departments and find alternative sources of funding in order to maintain levels of safety and security…

Essentials for starting a pediatric clinical study (4): Clinical pediatric safety planning based on preclinical toxicity studies and pediatric pharmacovigilance guidance.

PubMed

Sheth, Neha

2009-01-01

Juvenile toxicology studies in animals provide useful information to guide monitoring of potential adverse effects in children especially on growth and development. In order to continue to gain knowledge and build upon these preclinical studies, recent experience has suggested that additional approaches for monitoring of safety concerns in the pediatric population may be required. Recently, pediatric guidance has become available from the health authorities which provide pharmacovigilance concepts as they specifically relate to drugs being developed for pediatric indications. Clinical trials are typically not robust enough to detect rare or delayed safety effects as the pediatric trials are relatively short-term. Furthermore, such long term or rare effects may not be detected via standard voluntary postmarketing surveillance. Safety monitoring of children with Juvenile Inflammatory Arthritis (JIA) taking nonsteroid anti-inflammatory drug (NSAID)s will be used as an example to describe a post-marketing risk management and pharmacovigilance program that serves to better evaluate safety data from various sources. The intent of this program is to identify adverse events (AE), including events with longer latency, which may be associated with NSAID use in a pediatric population. In this presentation, the 4 major components of the program are to be addressed. Such a program may serve as a model to proactively generate and monitor safety data in order to identify AEs that may be associated with new therapeutics for a pediatric population.

Development of an evidence-based framework of factors contributing to patient safety incidents in hospital settings: a systematic review

PubMed Central

McEachan, Rosemary R C; Giles, Sally J; Sirriyeh, Reema; Watt, Ian S; Wright, John

2012-01-01

Objective The aim of this systematic review was to develop a ‘contributory factors framework’ from a synthesis of empirical work which summarises factors contributing to patient safety incidents in hospital settings. Design A mixed-methods systematic review of the literature was conducted. Data sources Electronic databases (Medline, PsycInfo, ISI Web of knowledge, CINAHL and EMBASE), article reference lists, patient safety websites, registered study databases and author contacts. Eligibility criteria Studies were included that reported data from primary research in secondary care aiming to identify the contributory factors to error or threats to patient safety. Results 1502 potential articles were identified. 95 papers (representing 83 studies) which met the inclusion criteria were included, and 1676 contributory factors extracted. Initial coding of contributory factors by two independent reviewers resulted in 20 domains (eg, team factors, supervision and leadership). Each contributory factor was then coded by two reviewers to one of these 20 domains. The majority of studies identified active failures (errors and violations) as factors contributing to patient safety incidents. Individual factors, communication, and equipment and supplies were the other most frequently reported factors within the existing evidence base. Conclusions This review has culminated in an empirically based framework of the factors contributing to patient safety incidents. This framework has the potential to be applied across hospital settings to improve the identification and prevention of factors that cause harm to patients. PMID:22421911

Dose limits to the lens of the eye: International Basic Safety Standards and related guidance.

PubMed

Boal, T J; Pinak, M

2015-06-01

The International Atomic Energy Agency (IAEA) safety requirements: 'General Safety Requirements Part 3--Radiation protection and safety of radiation sources: International Basic Safety Standards' (BSS) was approved by the IAEA Board of Governors at its meeting in September 2011, and was issued as General Safety Requirements Part 3 in July 2014. The equivalent dose limit for the lens of the eye for occupational exposure in planned exposure situations was reduced from 150 mSv year(-1) to 20 mSv year(-1), averaged over defined periods of 5 years, with no annual dose in a single year exceeding 50 mSv. This reduction in the dose limit for the lens of the eye followed the recommendation of the International Commission on Radiological Protection in its statement on tissue reactions of 21 April 2011. IAEA has developed guidance on the implications of the new dose limit for the lens of the eye. This paper summarises the process that led to the inclusion of the new dose limit for the lens of the eye in the BSS, and the implications of the new dose limit. © The International Society for Prosthetics and Orthotics Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Can Disproportionality Analysis of Post-marketing Case Reports be Used for Comparison of Drug Safety Profiles?

PubMed

Michel, Christiane; Scosyrev, Emil; Petrin, Michael; Schmouder, Robert

2017-05-01

Clinical trials usually do not have the power to detect rare adverse drug reactions. Spontaneous adverse reaction reports as for example available in post-marketing safety databases such as the FDA Adverse Event Reporting System (FAERS) are therefore a valuable source of information to detect new safety signals early. To screen such large data-volumes for safety signals, data-mining algorithms based on the concept of disproportionality have been developed. Because disproportionality analysis is based on spontaneous reports submitted for a large number of drugs and adverse event types, one might consider using these data to compare safety profiles across drugs. In fact, recent publications have promoted this practice, claiming to provide guidance on treatment decisions to healthcare decision makers. In this article we investigate the validity of this approach. We argue that disproportionality cannot be used for comparative drug safety analysis beyond basic hypothesis generation because measures of disproportionality are: (1) missing the incidence denominators, (2) subject to severe reporting bias, and (3) not adjusted for confounding. Hypotheses generated by disproportionality analyses must be investigated by more robust methods before they can be allowed to influence clinical decisions.

Biosignal PI, an Affordable Open-Source ECG and Respiration Measurement System

PubMed Central

Abtahi, Farhad; Snäll, Jonatan; Aslamy, Benjamin; Abtahi, Shirin; Seoane, Fernando; Lindecrantz, Kaj

2015-01-01

Bioimedical pilot projects e.g., telemedicine, homecare, animal and human trials usually involve several physiological measurements. Technical development of these projects is time consuming and in particular costly. A versatile but affordable biosignal measurement platform can help to reduce time and risk while keeping the focus on the important goal and making an efficient use of resources. In this work, an affordable and open source platform for development of physiological signals is proposed. As a first step an 8–12 leads electrocardiogram (ECG) and respiration monitoring system is developed. Chips based on iCoupler technology have been used to achieve electrical isolation as required by IEC 60601 for patient safety. The result shows the potential of this platform as a base for prototyping compact, affordable, and medically safe measurement systems. Further work involves both hardware and software development to develop modules. These modules may require development of front-ends for other biosignals or just collect data wirelessly from different devices e.g., blood pressure, weight, bioimpedance spectrum, blood glucose, e.g., through Bluetooth. All design and development documents, files and source codes will be available for non-commercial use through project website, BiosignalPI.org. PMID:25545268

Reassuring or Risky: The Presentation of Seafood Safety in the Aftermath of the British Petroleum Deepwater Horizon Oil Spill

PubMed Central

Lagasse, Lisa P.; Neff, Roni A.; Love, David C.; Chase, Rachel; Sokol, Natasha; Smith, Katherine Clegg

2013-01-01

The BP Deepwater Horizon Oil Spill was enormously newsworthy; coverage interlaced discussions of health, economic, and environmental impacts and risks. We analyzed 315 news articles that considered Gulf seafood safety from the year following the spill. We explored reporting trends, risk presentation, message source, stakeholder perspectives on safety, and framing of safety messages. Approximately one third of articles presented risk associated with seafood consumption as a standalone issue, rather than in conjunction with environmental or economic risks. Government sources were most frequent and their messages were largely framed as reassuring as to seafood safety. Discussions of prevention were limited to short-term, secondary prevention approaches. These data demonstrate a need for risk communication in news coverage of food safety that addresses the larger risk context, primary prevention, and structural causes of risk. PMID:23678933

African fermented dairy products - Overview of predominant technologically important microorganisms focusing on African Streptococcus infantarius variants and potential future applications for enhanced food safety and security.

PubMed

Jans, Christoph; Meile, Leo; Kaindi, Dasel Wambua Mulwa; Kogi-Makau, Wambui; Lamuka, Peter; Renault, Pierre; Kreikemeyer, Bernd; Lacroix, Christophe; Hattendorf, Jan; Zinsstag, Jakob; Schelling, Esther; Fokou, Gilbert; Bonfoh, Bassirou

2017-06-05

Milk is a major source of nutrients, but can also be a vehicle for zoonotic foodborne diseases, especially when raw milk is consumed. In Africa, poor processing and storage conditions contribute to contamination, outgrowth and transmission of pathogens, which lead to spoilage, reduced food safety and security. Fermentation helps mitigate the impact of poor handling and storage conditions by enhancing shelf life and food safety. Traditionally-fermented sour milk products are culturally accepted and widely distributed in Africa, and rely on product-specific microbiota responsible for aroma, flavor and texture. Knowledge of microbiota and predominant, technologically important microorganisms is critical in developing products with enhanced quality and safety, as well as sustainable interventions for these products, including Africa-specific starter culture development. This narrative review summarizes current knowledge of technologically-important microorganisms of African fermented dairy products (FDP) and raw milk, taking into consideration novel findings and taxonomy when re-analyzing data of 29 publications covering 25 products from 17 African countries. Technologically-important lactic acid bacteria such as Lactococcus lactis and Streptococcus infantarius subsp. infantarius (Sii), Lactobacillus spp. and yeasts predominated in raw milk and FDP across Africa. Re-analysis of data also suggests a much wider distribution of Sii and thus a potentially longer history of use than previously expected. Therefore, evaluating the role and safety of African Sii lineages is important when developing interventions and starter cultures for FDP in Africa to enhance food safety and food security. In-depth functional genomics, epidemiologic investigations and latest identification approaches coupled with stakeholder involvement will be required to evaluate the possibility of African Sii lineages as novel food-grade Streptococcus lineage. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Nutritional value of milk and meat products derived from cloning.

PubMed

Tomé, Daniel; Dubarry, Michel; Fromentin, Gilles

2004-01-01

The development and use of milk and meat products derived from cloning depends on their safety and on the nutritional advantages they can confer to the products as perceived by consumers. The development of such products thus implies (i) to demonstrate their safety and security, (ii) to show that their nutritional value is equivalent to the traditional products, and (iii) to identify the conditions under which cloning could allow additional nutritional and health benefit in comparison to traditional products for the consumers. Both milk and meat products are a source of high quality protein as determined from their protein content and essential amino acid profile. Milk is a source of calcium, phosphorus, zinc, magnesium and vitamin B2 and B12. Meat is a source of iron, zinc and vitamin B12. An important issue regarding the nutritional quality of meat and milk is the level and quality of fat which usually present a high content in saturated fat and some modification of the fat fraction could improve the nutritional quality of the products. The role of the dietary proteins as potential allergens has to be taken into account and an important aspect regarding this question is to evaluate whether the cloning does not produce the appearance of novel allergenic structures. The presence of bio-activities associated to specific components of milk (lactoferrin, immunoglobulins, growth factors, anti-microbial components) also represents a promising development. Preliminary results obtained in rats fed cow's milk or meat-based diets prepared from control animals or from animals derived from cloning did not show any difference between control and cloning-derived products.

U.S. Strategic Nuclear Forces: Background, Developments, and Issues

DTIC Science & Technology

2013-10-22

32 Safety, Security, and Management ...by Amy F. Woolf. 2 Natural Resources Defense Council. Table of U.S. Strategic Offensive Force Loadings. Archive of Nuclear Data. http://www.nrdc.org...12000 14000 16000 60 62 64 66 68 70 72 74 76 78 80 82 84 86 88 90 Year N um be r Launchers Warheads Source: Natural Resources Defense Council

Validation and verification of the laser range safety tool (LRST)

NASA Astrophysics Data System (ADS)

Kennedy, Paul K.; Keppler, Kenneth S.; Thomas, Robert J.; Polhamus, Garrett D.; Smith, Peter A.; Trevino, Javier O.; Seaman, Daniel V.; Gallaway, Robert A.; Crockett, Gregg A.

2003-06-01

The U.S. Dept. of Defense (DOD) is currently developing and testing a number of High Energy Laser (HEL) weapons systems. DOD range safety officers now face the challenge of designing safe methods of testing HEL's on DOD ranges. In particular, safety officers need to ensure that diffuse and specular reflections from HEL system targets, as well as direct beam paths, are contained within DOD boundaries. If both the laser source and the target are moving, as they are for the Airborne Laser (ABL), a complex series of calculations is required and manual calculations are impractical. Over the past 5 years, the Optical Radiation Branch of the Air Force Research Laboratory (AFRL/HEDO), the ABL System Program Office, Logicon-RDA, and Northrup-Grumman, have worked together to develop a computer model called teh Laser Range Safety Tool (LRST), specifically designed for HEL reflection hazard analyses. The code, which is still under development, is currently tailored to support the ABL program. AFRL/HEDO has led an LRST Validation and Verification (V&V) effort since 1998, in order to determine if code predictions are accurate. This paper summarizes LRST V&V efforts to date including: i) comparison of code results with laboratory measurements of reflected laser energy and with reflection measurements made during actual HEL field tests, and ii) validation of LRST's hazard zone computations.

Radiation Protection, Safety and Security Issues in Ghana.

PubMed

Boadu, Mary; Emi-Reynolds, Geoffrey; Amoako, Joseph Kwabena; Akrobortu, Emmanuel; Hasford, Francis

2016-11-01

Although the use of radioisotopes in Ghana began in 1952, the Radiation Protection Board of Ghana was established in 1993 and served as the national competent authority for authorization and inspection of practices and activities involving radiation sources until 2015. The law has been superseded by an Act of Parliament, Act 895 of 2015, mandating the Nuclear Regulatory Authority of Ghana to take charge of the regulation of radiation sources and their applications. The Radiation Protection Institute in Ghana provided technical support to the regulatory authority. Regulatory and service activities that were undertaken by the Institute include issuance of permits for handling of a radiation sources, authorization and inspection of radiation sources, radiation safety assessment, safety assessment of cellular signal towers, and calibration of radiation-emitting equipment. Practices and activities involving application of radiation are brought under regulatory control in the country through supervision by the national competent authority.

Containment system for experiments on radioactive and other hazardous materials in a Paris-Edinburgh press

DOE PAGES

Jacobsen, M. K.; Velisavljevic, N.

2015-11-20

Recent technical developments using the large volume Paris-Edinburgh press platform have enabled x-ray synchrotron studies at high pressure and temperature conditions. However, its application to some materials of interest, such as high hazard materials that require special handling due to safety issues, reactivity, or other challenges, has not been feasible without the introduction of special containment systems to eliminate the hazards. However, introduction of a containment system is challenging due to the requirement to provide full safety containment for operation in the variety of environments available, while not hindering any of the experimental probes that are available for inert samplemore » measurement. In this work, we report on the development and implementation of a full safety enclosure for a Paris-Edinburgh type press. During the initial development and subsequent application stage of work, experiments were performed on both cerium dioxide (CeO2) and uranium (U). As a result, this device allows for full implementation of all currently available experimental probes involving the Paris-Edinburgh press at the High Pressure Collaborative Access Team sector of the Advanced Photon Source.« less

Primer on the Highway Safety Improvement Program (HSIP)

DOT National Transportation Integrated Search

2014-09-16

The Highway Safety Improvement Program (HSIP) is a core Federal-aid program for State Departments of Transportation (State DOTs) administered by the Federal Highway Administration (FHWA). This is a major source of funding for safety projects on the n...

Measuring Tyre Rolling Noise at the Contact Patch

NASA Astrophysics Data System (ADS)

Kozak, P.; Matuszkova, R.; Radimsky, M.; Kudrna, J.

2017-06-01

This paper deals with noise generated by road traffic. A focus is concentrated solely on one of its sources related to tyre/road interaction referred as rolling noise. The paper states brief overview of various approaches and methods used to measure this particular source of road traffic noise. On the basis of literature reviews, a unique device has been designed. Development of the measuring device and possibilities of its usage are described in detail in this paper. Obtained results of noise measurements can then be used to design measures that increase safety and a lead to better comfort on the road.

THE ART OF DATA MINING THE MINEFIELDS OF TOXICITY ...

EPA Pesticide Factsheets

Toxicity databases have a special role in predictive toxicology, providing ready access to historical information throughout the workflow of discovery, development, and product safety processes in drug development as well as in review by regulatory agencies. To provide accurate information within a hypothesesbuilding environment, the content of the databases needs to be rigorously modeled using standards and controlled vocabulary. The utilitarian purposes of databases widely vary, ranging from a source for (Q)SAR datasets for modelers to a basis for

Doppler Radar Profiler for Launch Winds at the Kennedy Space Center (Phase 1a)

NASA Technical Reports Server (NTRS)

Murri, Daniel G.

2011-01-01

The NASA Engineering and Safety Center (NESC) received a request from the, NASA Technical Fellow for Flight Mechanics at Langley Research Center (LaRC), to develop a database from multiple Doppler radar wind profiler (DRWP) sources and develop data processing algorithms to construct high temporal resolution DRWP wind profiles for day-of-launch (DOL) vehicle assessment. This document contains the outcome of Phase 1a of the assessment including Findings, Observations, NESC Recommendations, and Lessons Learned.

Distributed Space Solar Power

NASA Technical Reports Server (NTRS)

Fork, Richard L.

2001-01-01

The objective was to assess the feasibility of safely collecting solar power at geostationary orbit and delivering it to earth. A strategy which could harness a small fraction of the millions of gigawatts of sunlight passing near earth could adequately supply the power needs of earth and those of space exploration far into the future. Light collected and enhanced both spatially and temporally in space and beamed to earth provides probably the only practical means of safe and efficient delivery of this space solar power to earth. In particular, we analyzed the feasibility of delivering power to sites on earth at a comparable intensity, after conversion to a usable form, to existing power needs. Two major obstacles in the delivery of space solar power to earth are safety and the development of a source suitable for space. We focused our approach on: (1) identifying system requirements and designing a strategy satisfying current eye and skin safety requirements; and (2) identifying a concept for a potential space-based source for producing the enhanced light.

Reducing the barriers against analytical epidemiological studies in investigations of local foodborne disease outbreaks in Germany - a starter kit for local health authorities.

PubMed

Werber, D; Bernard, H

2014-02-27

Thousands of infectious food-borne disease outbreaks (FBDO) are reported annually to the European Food Safety Authority within the framework of the zoonoses Directive (2003/99/EC). Most recognised FBDO occur locally following point source exposure, but only few are investigated using analytical epidemiological studies. In Germany, and probably also in other countries of the European Union, this seems to be particularly true for those investigated by local health authorities. Analytical studies, usually cohort studies or case–control studies, are a powerful tool to identify suspect food vehicles. Therefore, from a public health and food safety perspective, their more frequent usage is highly desirable. We have developed a small toolbox consisting of a strategic concept and a simple software tool for data entry and analysis, with the objective to increase the use of analytical studies in the investigation of local point source FBDO in Germany.

SU-G-201-16: Thermal Imaging in Source Visualization and Radioactivity Measurement for High Dose Rate Brachytherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, X; Lei, Y; Zheng, D

2016-06-15

Purpose: High Dose Rate (HDR) brachytherapy poses a special challenge to radiation safety and quality assurance (QA) due to its high radioactivity, and it is thus critical to verify the HDR source location and its radioactive strength. This study demonstrates a new method for measuring HDR source location and radioactivity utilizing thermal imaging. A potential application would relate to HDR QA and safety improvement. Methods: Heating effects by an HDR source were studied using Finite Element Analysis (FEA). Thermal cameras were used to visualize an HDR source inside a plastic applicator made of polyvinylidene difluoride (PVDF). Using different source dwellmore » times, correlations between the HDR source strength and heating effects were studied, thus establishing potential daily QA criteria using thermal imaging Results: For an Ir1?2 source with a radioactivity of 10 Ci, the decay-induced heating power inside the source is ∼13.3 mW. After the HDR source was extended into the PVDF applicator and reached thermal equilibrium, thermal imaging visualized the temperature gradient of 10 K/cm along the PVDF applicator surface, which agreed with FEA modeling. For Ir{sup 192} source activities ranging from 4.20–10.20 Ci, thermal imaging could verify source activity with an accuracy of 6.3% with a dwell time of 10 sec, and an accuracy of 2.5 % with 100 sec. Conclusion: Thermal imaging is a feasible tool to visualize HDR source dwell positions and verify source integrity. Patient safety and treatment quality will be improved by integrating thermal measurements into HDR QA procedures.« less

Hospital board oversight of quality and safety: a stakeholder analysis exploring the role of trust and intelligence.

PubMed

Millar, Ross; Freeman, Tim; Mannion, Russell

2015-06-16

Hospital boards, those executive members charged with developing appropriate organisational strategies and cultures, have an important role to play in safeguarding the care provided by their organisation. However, recent concerns have been raised over boards' ability to enact their duty to ensure the quality and safety of care. This paper offers critical reflection on the relationship between hospital board oversight and patient safety. In doing so it highlights new perspectives and suggestions for developing this area of study. The article draws on 10 interviews with key informants and policy actors who form part of the 'issue network' interested in the promotion of patient safety in the English National Health Service. The interviews surfaced a series of narratives regarding hospital board oversight of patient safety. These elaborated on the role of trust and intelligence in highlighting the potential dangers and limitations of approaches to hospital board oversight which have been narrowly focused on a risk-based view of organisational performance. In response, a need to engage with the development of trust based organisational relationships is identified, in which effective board oversight is built on 'trust' characterised by styles of leadership and behaviours that are attentive to the needs and concerns of both staff and patients. Effective board oversight also requires the gathering and triangulating of 'intelligence' generated from both national and local information sources. We call for a re-imagination of hospital board oversight in the light of these different perspectives and articulate an emerging research agenda in this area.

A UMLS-based spell checker for natural language processing in vaccine safety.

PubMed

Tolentino, Herman D; Matters, Michael D; Walop, Wikke; Law, Barbara; Tong, Wesley; Liu, Fang; Fontelo, Paul; Kohl, Katrin; Payne, Daniel C

2007-02-12

The Institute of Medicine has identified patient safety as a key goal for health care in the United States. Detecting vaccine adverse events is an important public health activity that contributes to patient safety. Reports about adverse events following immunization (AEFI) from surveillance systems contain free-text components that can be analyzed using natural language processing. To extract Unified Medical Language System (UMLS) concepts from free text and classify AEFI reports based on concepts they contain, we first needed to clean the text by expanding abbreviations and shortcuts and correcting spelling errors. Our objective in this paper was to create a UMLS-based spelling error correction tool as a first step in the natural language processing (NLP) pipeline for AEFI reports. We developed spell checking algorithms using open source tools. We used de-identified AEFI surveillance reports to create free-text data sets for analysis. After expansion of abbreviated clinical terms and shortcuts, we performed spelling correction in four steps: (1) error detection, (2) word list generation, (3) word list disambiguation and (4) error correction. We then measured the performance of the resulting spell checker by comparing it to manual correction. We used 12,056 words to train the spell checker and tested its performance on 8,131 words. During testing, sensitivity, specificity, and positive predictive value (PPV) for the spell checker were 74% (95% CI: 74-75), 100% (95% CI: 100-100), and 47% (95% CI: 46%-48%), respectively. We created a prototype spell checker that can be used to process AEFI reports. We used the UMLS Specialist Lexicon as the primary source of dictionary terms and the WordNet lexicon as a secondary source. We used the UMLS as a domain-specific source of dictionary terms to compare potentially misspelled words in the corpus. The prototype sensitivity was comparable to currently available tools, but the specificity was much superior. The slow processing speed may be improved by trimming it down to the most useful component algorithms. Other investigators may find the methods we developed useful for cleaning text using lexicons specific to their area of interest.

A UMLS-based spell checker for natural language processing in vaccine safety

PubMed Central

Tolentino, Herman D; Matters, Michael D; Walop, Wikke; Law, Barbara; Tong, Wesley; Liu, Fang; Fontelo, Paul; Kohl, Katrin; Payne, Daniel C

2007-01-01

Background The Institute of Medicine has identified patient safety as a key goal for health care in the United States. Detecting vaccine adverse events is an important public health activity that contributes to patient safety. Reports about adverse events following immunization (AEFI) from surveillance systems contain free-text components that can be analyzed using natural language processing. To extract Unified Medical Language System (UMLS) concepts from free text and classify AEFI reports based on concepts they contain, we first needed to clean the text by expanding abbreviations and shortcuts and correcting spelling errors. Our objective in this paper was to create a UMLS-based spelling error correction tool as a first step in the natural language processing (NLP) pipeline for AEFI reports. Methods We developed spell checking algorithms using open source tools. We used de-identified AEFI surveillance reports to create free-text data sets for analysis. After expansion of abbreviated clinical terms and shortcuts, we performed spelling correction in four steps: (1) error detection, (2) word list generation, (3) word list disambiguation and (4) error correction. We then measured the performance of the resulting spell checker by comparing it to manual correction. Results We used 12,056 words to train the spell checker and tested its performance on 8,131 words. During testing, sensitivity, specificity, and positive predictive value (PPV) for the spell checker were 74% (95% CI: 74–75), 100% (95% CI: 100–100), and 47% (95% CI: 46%–48%), respectively. Conclusion We created a prototype spell checker that can be used to process AEFI reports. We used the UMLS Specialist Lexicon as the primary source of dictionary terms and the WordNet lexicon as a secondary source. We used the UMLS as a domain-specific source of dictionary terms to compare potentially misspelled words in the corpus. The prototype sensitivity was comparable to currently available tools, but the specificity was much superior. The slow processing speed may be improved by trimming it down to the most useful component algorithms. Other investigators may find the methods we developed useful for cleaning text using lexicons specific to their area of interest. PMID:17295907

Occupational Safety, Health, and Well-being Among Home-based Workers in the Informal Economy of Thailand

PubMed Central

Nankongnab, Noppanun; Silpasuwan, Pimpan; Markkanen, Pia; Kongtip, Pornpimol; Woskie, Susan

2018-01-01

The objective of this article is to provide a summary of the issues related to occupational safety and health and well-being among workers in the informal economy of Thailand, with a special emphasis on home-based workers. The reviewed literature includes documents and information sources developed by the International Labour Organization, the National Statistical Office of Thailand, peer-reviewed scientific publications, and master’s theses conducted in Thailand. This work is part of a needs and opportunities analysis carried out by the Center for Work, Environment, Nutrition and Development—a partnership between Mahidol University and University of Massachusetts Lowell to identify the gaps in knowledge and research to support government policy development in the area of occupational and environmental health for workers in the informal economy. PMID:26059416

30 CFR 56.4500 - Heat sources.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Fire Prevention and Control... shall be separated from combustible materials if a fire hazard could be created. ...

30 CFR 57.4500 - Heat sources.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and Control... shall be separated from combustible materials if a fire hazard could be created. ...

New horizons in microbiological food safety: Photodynamic Decontamination based on a curcumin derivative.

PubMed

Glueck, Michael; Schamberger, Barbara; Eckl, Peter; Plaetzer, Kristjan

2017-12-06

Outbreaks of foodborne diseases are regularly reported worldwide. In particular, uncooked plant food is considered risky in terms of microbiological safety. Food is also the most important transmission route for resistant microorganisms from animals to humans. Photodynamic Decontamination (PDc) of foodstuff was recently introduced as a novel approach for increasing microbiological food safety. We investigated the efficiency of PDc on plant food with different geometries (flat, spherical and complex) using a two-dimensional LED array as a light source (435 nm, 33.8 J cm -2 ) and the cationic curcumin derivative SACUR-3 as a photosensitiser. A photoantibacterial effect (>3 log 10 CFU reduction) was achieved on all flat substrates (slices of cucumber, tomato and lettuce) with 10 μM, 50 μM or 100 μM SACUR-3. The maximal photokilling with a relative inactivation of 5.6 log 10 was measured on lettuce using 50 μM of the photoactive compound. Phototreatment of non-germinated fenugreek seeds and mung beans was successful if the spherical objects were rotated while under illumination (antibacterial effect at 100 μM SACUR-3). The decontamination of mung bean germlings with a more complex geometry using the PDc approach was ineffective with the two-dimensional light source. In conclusion, PDc based on the cationic curcumin derivative SACUR-3 is very effective at improving the microbiological safety of plant food with a flat or spherical geometry. More complex objects will require the development of novel illumination devices.

Safe clinical practice for patients hospitalised in a suicidal crisis: a study protocol for a qualitative case study

PubMed Central

Berg, Siv Hilde; Rørtveit, Kristine; Walby, Fredrik A; Aase, Karina

2017-01-01

Introduction Suicide prevention in psychiatric care is arguably complex and incompletely understood as a patient safety issue. A resilient healthcare approach provides perspectives through which to understand this complexity by understanding everyday clinical practice. By including suicidal patients and healthcare professionals as sources of knowledge, a deeper understanding of what constitutes safe clinical practice can be achieved. Methods This planned study aims to adopt the perspective of resilient healthcare to provide a deeper understanding of safe clinical practice for suicidal patients in psychiatric inpatient care. It will describe the experienced components and conditions of safe clinical practice and the experienced practice of patient safety. The study will apply a descriptive case study approach consisting of qualitative semistructured interviews and focus groups. The data sources are hospitalised patients in a suicidal crisis and healthcare professionals in clinical practice. Ethics and dissemination This study was approved by the Regional Ethics Committee (2016/34). The results will be disseminated through scientific articles, a PhD dissertation, and national and international conferences. These findings can generate knowledge to be integrated into the practice of safety for suicidal inpatients in Norway and to improve the feasibility of patient safety measures. Theoretical generalisations can be drawn regarding safe clinical practice by taking into account the experiences of patients and healthcare professionals. Thus, this study can inform the conceptual development of safe clinical practice for suicidal patients. PMID:28132001

Commercial objectives, technology transfer, and systems analysis for fusion power development

NASA Astrophysics Data System (ADS)

Dean, Stephen O.

1988-09-01

Fusion is an inexhaustible source of energy that has the potential for economic commercial applications with excellent safety and environmental characteristics. The primary focus for the fusion energy development program is the generation of central station electricity. Fusion has the potential, however, for many other applications. The fact that a large fraction of the energy released in a DT fusion reaction is carried by high energy neutrons suggests potentially unique applications. In addition, fusion R and D will lead to new products and new markets. Each fusion application must meet certain standards of economic and safety and environmental attractiveness. For this reason, economics on the one hand, and safety and environment and licensing on the other, are the two primary criteria for setting long range commercial fusion objectives. A major function of systems analysis is to evaluate the potential of fusion against these objectives and to help guide the fusion R and D program toward practical applications. The transfer of fusion technology and skills from the national labs and universities to industry is the key to achieving the long range objective of commercial fusion applications.

Commercial objectives, technology transfer, and systems analysis for fusion power development

NASA Technical Reports Server (NTRS)

Dean, Stephen O.

1988-01-01

Fusion is an inexhaustible source of energy that has the potential for economic commercial applications with excellent safety and environmental characteristics. The primary focus for the fusion energy development program is the generation of central station electricity. Fusion has the potential, however, for many other applications. The fact that a large fraction of the energy released in a DT fusion reaction is carried by high energy neutrons suggests potentially unique applications. In addition, fusion R and D will lead to new products and new markets. Each fusion application must meet certain standards of economic and safety and environmental attractiveness. For this reason, economics on the one hand, and safety and environment and licensing on the other, are the two primary criteria for setting long range commercial fusion objectives. A major function of systems analysis is to evaluate the potential of fusion against these objectives and to help guide the fusion R and D program toward practical applications. The transfer of fusion technology and skills from the national labs and universities to industry is the key to achieving the long range objective of commercial fusion applications.

Safety of antimicrobial treatment during pregnancy: a current review of resistance, immunomodulation and teratogenicity.

PubMed

Lamont, Harriet F; Blogg, Henrietta J; Lamont, Ronald F

2014-12-01

The extent of antibiotic use in pregnancy remains unknown but may occur in > 40% of pregnant women for various indications, at different gestational ages from different sources. Antibiotic resistance, alterations to the neonatal immune system causing allergy, asthma and atopic disease in later life and teratogenicity. Although teratogenesis is not a major concern, it is important, and ignorance and complacency cast a long shadow. Robust evidence exists to guide clinicians in their choice of a safe agent with respect to teratogenicity. Antibiotic resistance is a major safety concern, and together with decreased research and development of new antibiotic agents, it has required legal initiatives to encourage Big Pharma to search for safe alternatives. New information from culture-independent, molecular-based techniques has resulted in a greater understanding of the adverse effects of antepartum/intrapartum antibiotics on the maternal vaginal microbiome and the neonatal gut microbiome. As this might adversely affect the development of the immature immune system and lead to asthma, allergy and atopic disease in later life, new research merits support in scrutinizing the safety of antibiotic use in pregnancy.

Social Media Listening for Routine Post-Marketing Safety Surveillance.

PubMed

Powell, Gregory E; Seifert, Harry A; Reblin, Tjark; Burstein, Phil J; Blowers, James; Menius, J Alan; Painter, Jeffery L; Thomas, Michele; Pierce, Carrie E; Rodriguez, Harold W; Brownstein, John S; Freifeld, Clark C; Bell, Heidi G; Dasgupta, Nabarun

2016-05-01

Post-marketing safety surveillance primarily relies on data from spontaneous adverse event reports, medical literature, and observational databases. Limitations of these data sources include potential under-reporting, lack of geographic diversity, and time lag between event occurrence and discovery. There is growing interest in exploring the use of social media ('social listening') to supplement established approaches for pharmacovigilance. Although social listening is commonly used for commercial purposes, there are only anecdotal reports of its use in pharmacovigilance. Health information posted online by patients is often publicly available, representing an untapped source of post-marketing safety data that could supplement data from existing sources. The objective of this paper is to describe one methodology that could help unlock the potential of social media for safety surveillance. A third-party vendor acquired 24 months of publicly available Facebook and Twitter data, then processed the data by standardizing drug names and vernacular symptoms, removing duplicates and noise, masking personally identifiable information, and adding supplemental data to facilitate the review process. The resulting dataset was analyzed for safety and benefit information. In Twitter, a total of 6,441,679 Medical Dictionary for Regulatory Activities (MedDRA(®)) Preferred Terms (PTs) representing 702 individual PTs were discussed in the same post as a drug compared with 15,650,108 total PTs representing 946 individual PTs in Facebook. Further analysis revealed that 26 % of posts also contained benefit information. Social media listening is an important tool to augment post-marketing safety surveillance. Much work remains to determine best practices for using this rapidly evolving data source.

Sub-atmospheric pressure gas sources for bulk storage and delivery of arsine and phosphine to MOCVD tools

NASA Astrophysics Data System (ADS)

Raynor, M. W.; Houlding, V. H.; Funke, H. H.; Frye, R.; Dietz, J. A.

2003-02-01

A sub-atmospheric (SA) pressure gas source, based on the reversible adsorption of hydride gas onto a high surface area substrate within a cylinder, has been developed for the safe storage and delivery of high-purity arsine and phosphine for MOCVD processes. SA pressure and high-pressure sources are compared with respect to gas delivery and purity, risk reduction, and cost benefits. Gas analysis and performance of epi-structures grown with SA pressure cylinders confirm that the hydride gas delivered meets the purity requirements of MOCVD processes. Further, the low gas release rates measured from 2.2 and 49 l SA pressure cylinders indicate that the technology can be scaled up without additional safety risk.

30 CFR 57.4430 - Surface storage facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

....4430 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention... ignition sources to prevent fire or explosion; and (4) Vented or otherwise constructed to prevent...

30 CFR 56.4430 - Storage facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Fire Prevention and... separated from ignition sources to prevent fire or explosion; and (4) Vented or otherwise constructed to...

10 CFR 1703.105 - Requests for board records not available through the public reading room (FOIA requests).

Code of Federal Regulations, 2014 CFR

2014-01-01

... public reading room (FOIA requests). 1703.105 Section 1703.105 Energy DEFENSE NUCLEAR FACILITIES SAFETY... address for such requests is: Designated FOIA Officer, Defense Nuclear Facilities Safety Board, 625... pertain to an immediate source of risk to the public health and safety or worker safety at a defense...

10 CFR 1703.105 - Requests for board records not available through the public reading room (FOIA requests).

Code of Federal Regulations, 2013 CFR

2013-01-01

... public reading room (FOIA requests). 1703.105 Section 1703.105 Energy DEFENSE NUCLEAR FACILITIES SAFETY... address for such requests is: Designated FOIA Officer, Defense Nuclear Facilities Safety Board, 625... pertain to an immediate source of risk to the public health and safety or worker safety at a defense...

10 CFR 1703.105 - Requests for board records not available through the public reading room (FOIA requests).

Code of Federal Regulations, 2012 CFR

2012-01-01

... public reading room (FOIA requests). 1703.105 Section 1703.105 Energy DEFENSE NUCLEAR FACILITIES SAFETY... address for such requests is: Designated FOIA Officer, Defense Nuclear Facilities Safety Board, 625... pertain to an immediate source of risk to the public health and safety or worker safety at a defense...

10 CFR 1703.105 - Requests for board records not available through the public reading room (FOIA requests).

Code of Federal Regulations, 2010 CFR

2010-01-01

... public reading room (FOIA requests). 1703.105 Section 1703.105 Energy DEFENSE NUCLEAR FACILITIES SAFETY... address for such requests is: Designated FOIA Officer, Defense Nuclear Facilities Safety Board, 625... pertain to an immediate source of risk to the public health and safety or worker safety at a defense...

10 CFR 1703.105 - Requests for board records not available through the public reading room (FOIA requests).

Code of Federal Regulations, 2011 CFR

2011-01-01

... public reading room (FOIA requests). 1703.105 Section 1703.105 Energy DEFENSE NUCLEAR FACILITIES SAFETY... address for such requests is: Designated FOIA Officer, Defense Nuclear Facilities Safety Board, 625... pertain to an immediate source of risk to the public health and safety or worker safety at a defense...

Lessons in Safety: Cultural Politics and Safety Education in a Multiracial, Multiethnic Early Childhood Education Setting

ERIC Educational Resources Information Center

Saltmarsh, Sue

2010-01-01

Young children learn about safety from a variety of sources, including formal lessons and informal activities provided through early childhood education and care (ECEC) services. For many ECEC centres in Australia, scheduled visits from police and fire departments are a highlight of safety education activities. Such visits offer children the…

Transdermal Delivery of Iron Using Soluble Microneedles: Dermal Kinetics and Safety.

PubMed

Modepalli, Naresh; Shivakumar, H Nanjappa; McCrudden, Maeliosa T C; Donnelly, Ryan F; Banga, Ajay; Murthy, S Narasimha

2016-03-01

Currently, the iron compounds are administered via oral and parenteral routes in patients of all ages, to treat iron deficiency. Despite continued efforts to supplement iron via these conventional routes, iron deficiency still remains the most prevalent nutritional disorder all over the world. Transdermal replenishment of iron is a novel, potential approach of iron replenishment. Ferric pyrophosphate (FPP) was found to be a suitable source of iron for transdermal replenishment. The safety of FPP was assessed in this project by challenging the dermal fibroblast cells with high concentration of FPP. The cell viability assay and reactive oxygen species assay were performed. The soluble microneedle array was developed, incorporated with FPP and the kinetics of free iron in the skin; extracellular fluid following dermal administration of microneedle array was investigated in hairless rats. From the cell based assays, FPP was selected as one of the potential iron sources for transdermal delivery. The microneedles were found to dissolve in the skin fluid within 3 hours of administration. The FPP concentration in the dermal extracellular fluid declined after complete dissolution of the microneedle array. Overall, the studies demonstrated the safety of FPP for dermal delivery and the feasibility of soluble microneedle approach for transdermal iron replenishment therapy. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

An Interoperability Platform Enabling Reuse of Electronic Health Records for Signal Verification Studies

PubMed Central

Yuksel, Mustafa; Gonul, Suat; Laleci Erturkmen, Gokce Banu; Sinaci, Ali Anil; Invernizzi, Paolo; Facchinetti, Sara; Migliavacca, Andrea; Bergvall, Tomas; Depraetere, Kristof; De Roo, Jos

2016-01-01

Depending mostly on voluntarily sent spontaneous reports, pharmacovigilance studies are hampered by low quantity and quality of patient data. Our objective is to improve postmarket safety studies by enabling safety analysts to seamlessly access a wide range of EHR sources for collecting deidentified medical data sets of selected patient populations and tracing the reported incidents back to original EHRs. We have developed an ontological framework where EHR sources and target clinical research systems can continue using their own local data models, interfaces, and terminology systems, while structural interoperability and Semantic Interoperability are handled through rule-based reasoning on formal representations of different models and terminology systems maintained in the SALUS Semantic Resource Set. SALUS Common Information Model at the core of this set acts as the common mediator. We demonstrate the capabilities of our framework through one of the SALUS safety analysis tools, namely, the Case Series Characterization Tool, which have been deployed on top of regional EHR Data Warehouse of the Lombardy Region containing about 1 billion records from 16 million patients and validated by several pharmacovigilance researchers with real-life cases. The results confirm significant improvements in signal detection and evaluation compared to traditional methods with the missing background information. PMID:27123451

ITRB Spar Domestic Source

DTIC Science & Technology

2012-12-14

Each pair of rollers is designed to capture the shafts mounted to both ends of the tool lid. Additionally, a safety pin can be put in place to...ITRB for the AH-64D. The scope of the program included structural design , materials selection, manufacturing producibility analysis, tooling design ...responsible for tooling design and fabrication, fabrication process development and fabrication of spars and test samples; G3 who designed the RTM

Repository of not readily available documents for project W-320

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conner, J.C.

1997-04-18

The purpose of this document is to provide a readily available source of the technical reports needed for the development of the safety documentation provided for the waste retrieval sluicing system (WRSS), designed to remove the radioactive and chemical sludge from tank 241-C-106, and transport that material to double-shell tank 241-AY-102 via a new, temporary, shielded, encased transfer line.

The Microphysiology Systems Database for Analyzing and Modeling Compound Interactions with Human and Animal Organ Models

PubMed Central

Vernetti, Lawrence; Bergenthal, Luke; Shun, Tong Ying; Taylor, D. Lansing

2016-01-01

Abstract Microfluidic human organ models, microphysiology systems (MPS), are currently being developed as predictive models of drug safety and efficacy in humans. To design and validate MPS as predictive of human safety liabilities requires safety data for a reference set of compounds, combined with in vitro data from the human organ models. To address this need, we have developed an internet database, the MPS database (MPS-Db), as a powerful platform for experimental design, data management, and analysis, and to combine experimental data with reference data, to enable computational modeling. The present study demonstrates the capability of the MPS-Db in early safety testing using a human liver MPS to relate the effects of tolcapone and entacapone in the in vitro model to human in vivo effects. These two compounds were chosen to be evaluated as a representative pair of marketed drugs because they are structurally similar, have the same target, and were found safe or had an acceptable risk in preclinical and clinical trials, yet tolcapone induced unacceptable levels of hepatotoxicity while entacapone was found to be safe. Results demonstrate the utility of the MPS-Db as an essential resource for relating in vitro organ model data to the multiple biochemical, preclinical, and clinical data sources on in vivo drug effects. PMID:28781990

Piezoelectric-based hybrid reserve power sources for munitions

NASA Astrophysics Data System (ADS)

Rastegar, J.; Kwok, P.

2017-04-01

Reserve power sources are used extensively in munitions and other devices, such as emergency devices or remote sensors that need to be powered only once and for a relatively short duration. Current chemical reserve power sources, including thermal batteries and liquid reserve batteries sometimes require more than 100 msec to become fully activated. In many applications, however, electrical energy is required in a few msec following the launch event. In such applications, other power sources are needed to provide power until the reserve battery is fully activated. The amount of electrical energy that is required by most munitions before chemical reserve batteries are fully activated is generally small and can be provided by properly designed piezoelectric-based energy harvesting devices. In this paper, the development of a hybrid reserve power source that is constructed by integration of a piezoelectric-based energy harvesting device with a reserve battery to provide power almost instantaneously upon munitions firing or other similar events is being reported. A review of the state of the art in piezoelectric-based electrical energy harvesting methods and devices and their charge collection electronics for use in the developed hybrid power sources is provided together with the results of testing of the piezoelectric component of the power source and its electronic safety and charge collection electronics.

Evaluating oversight systems for emerging technologies: a case study of genetically engineered organisms.

PubMed

Kuzma, Jennifer; Najmaie, Pouya; Larson, Joel

2009-01-01

The U.S. oversight system for genetically engineered organisms (GEOs) was evaluated to develop hypotheses and derive lessons for oversight of other emerging technologies, such as nanotechnology. Evaluation was based upon quantitative expert elicitation, semi-standardized interviews, and historical literature analysis. Through an interdisciplinary policy analysis approach, blending legal, ethical, risk analysis, and policy sciences viewpoints, criteria were used to identify strengths and weaknesses of GEOs oversight and explore correlations among its attributes and outcomes. From the three sources of data, hypotheses and broader conclusions for oversight were developed. Our analysis suggests several lessons for oversight of emerging technologies: the importance of reducing complexity and uncertainty in oversight for minimizing financial burdens on small product developers; consolidating multi-agency jurisdictions to avoid gaps and redundancies in safety reviews; consumer benefits for advancing acceptance of GEO products; rigorous and independent pre- and post-market assessment for environmental safety; early public input and transparency for ensuring public confidence; and the positive role of public input in system development, informed consent, capacity, compliance, incentives, and data requirements and stringency in promoting health and environmental safety outcomes, as well as the equitable distribution of health impacts. Our integrated approach is instructive for more comprehensive analyses of oversight systems, developing hypotheses for how features of oversight systems affect outcomes, and formulating policy options for oversight of future technological products, especially nanotechnology products.

Chinese Herbal Therapy for the Treatment of Food Allergy

PubMed Central

Li, Xiu-Min

2014-01-01

Traditional Chinese medicine (TCM) has been widely used in China to treat various diseases for thousands of years. Given its reputed effectiveness, low cost, and favorable safety profile, TCM is attracting great interest in Western societies as a source of therapy for an array of illnesses, including allergies and asthma. Although food allergy has not been described in the TCM literature, a novel treatment for food allergy, named the food allergy herbal formula-2 (FAHF-2), was developed using TCM principles. Using a well-characterized murine model of peanut allergy, FAHF-2 has been shown to be highly effective in providing long-term protection against peanut-induced anaphylaxis, with a high safety margin. Phase 1 human trials have demonstrated the safety of FAHF-2 in food allergic individuals. Currently, a phase 2 trial examining efficacy of FAHF-2 is on-going. Other TCMs also show a potential for treating food allergies in preclinical studies. PMID:22581122

A Review of the Poultry Meat Production Industry for Food Safety in Indonesia

NASA Astrophysics Data System (ADS)

Wahyono, N. D.; Utami, M. M. D.

2018-01-01

Poultry meat is an indispensable source of animal protein in human growth and development, so it is in great demand by people all over the world. Poultry meat has several advantages, namely the quality of nutrition is good enough, delicious taste, relatively affordable price, easy to get and accepted all levels of society with diverse backgrounds. The era of globalization requires competitive products, such as chicken meat in Indonesia, the current chicken meat industry is not only based on high production capacity and decreased production costs but also chicken products are safe to eat. As a consequence of trade liberalization, the poultry industry faces the threat of competition with cheaper products with better quality. The food safety of chicken meat starts from the farm, processing process until consumed. Food safety is a requirement of food products that must be handled by involving government, industry and consumers.

Bioactive nutrients - Time for tolerable upper intake levels to address safety.

PubMed

Yates, Allison A; Erdman, John W; Shao, Andrew; Dolan, Laurie C; Griffiths, James C

2017-03-01

There is increasing interest by consumers, researchers, and regulators into the roles that certain bioactive compounds, derived from plants and other natural sources, can play in health maintenance and promotion, and even prolonging a productive quality of life. Research has rapidly emerged suggesting that a wide range of compounds and mixtures in and from plants (such as fruits and vegetables, tea and cocoa) and animals (such as fish and probiotics) may exert substantial health benefits. There is interest in exploring the possibility of establishing recommended intakes or dietary guidance for certain bioactive substances to help educate consumers. A key aspect of establishing dietary guidance is the assessment of safety/toxicity of these substances. Toxicologists need to be involved in both the development of the safety framework and in the evaluation of the science to establish maximum intake/upper limits. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Infant toxicology: state of the science and considerations in evaluation of safety.

PubMed

Neal-Kluever, April; Aungst, Jason; Gu, Yan; Hatwell, Karen; Muldoon-Jacobs, Kristi; Liem, Ayesha; Ogungbesan, Adejoke; Shackelford, Mary

2014-08-01

Differences in the physiology and biological susceptibilities of adults and infants have led to growing interest in safety evaluation methods for exposures from infant formula packaging. In addition to potential physiological differences, infants aged 0-6 months may consume a sole source of food, infant formula or breast milk, and consume higher amounts of food relative to body weight compared to adults. While the duration of the exposure is short compared to the expected lifespan of the individual, it occurs during a period of important developmental processes. The purpose of this document is to (1) review key biological and exposure elements that may impact the evaluation of safety for food contact products intended for use by infants, (2) summarize the current reproductive and developmental toxicity testing protocols available, and (3) identify potential data gaps concerning this period of development. Published by Elsevier Ltd.

The Wireless Sensor Network (WSN) Based Coal Ash Impoundments Safety Monitoring System

NASA Astrophysics Data System (ADS)

Sun, E. J.; Nieto, A.; Zhang, X. K.

2017-01-01

Coal ash impoundments are inevitable production of the coal-fired power plants. All coal ash impoundments in North Carolina USA that tested for groundwater contamination are leaking toxic heavy metals and other pollutants. Coal ash impoundments are toxic sources of dangerous pollutants that pose a danger to human and environmental health if the toxins spread to adjacent surface waters and drinking water wells. Coal ash impoundments failures accidents resulted in serious water contamination along with toxic heavy metals. To improve the design and stability of coal ash impoundments, the Development of a Coal Ash Impoundment Safety Monitoring System (CAISM) was proposed based on the implementation of a wireless sensor network (WSN) with the ability to monitor the stability of coal ash impoundments, water level, and saturation levels on-demand and remotely. The monitoring system based on a robust Ad-hoc network could be adapted to different safety conditions.

ReactorHealth Physics operations at the NIST center for neutron research.

PubMed

Johnston, Thomas P

2015-02-01

Performing health physics and radiation safety functions under a special nuclear material license and a research and test reactor license at a major government research and development laboratory encompasses many elements not encountered by industrial, general, or broad scope licenses. This article reviews elements of the health physics and radiation safety program at the NIST Center for Neutron Research, including the early history and discovery of the neutron, applications of neutron research, reactor overview, safety and security of radiation sources and radioactive material, and general health physics procedures. These comprise precautions and control of tritium, training program, neutron beam sample processing, laboratory audits, inventory and leak tests, meter calibration, repair and evaluation, radioactive waste management, and emergency response. In addition, the radiation monitoring systems will be reviewed including confinement building monitoring, ventilation filter radiation monitors, secondary coolant monitors, gaseous fission product monitors, gas monitors, ventilation tritium monitor, and the plant effluent monitor systems.

Electronic availability of microgravity experiments safety and integration requirements documents

NASA Technical Reports Server (NTRS)

Hogan, Jean M.

1995-01-01

This follow-on to NASA Contractor Report 195447, Microgravity Experiments Safety and Integration Requirements Document Tree, provides the details for accessing the systems that contain the official, electronic versions of the documents initially researched in NASA Contractor Report 195447. The data in this report serves as a valuable information source for the NASA Lewis Research Center Project Documentation Center (PDC), as well as for all developers of space experiments. The PDC has acquired the hardware, software, ID's, and passwords necessary to access most of these systems and is now able to provide customers with current document information as well as immediate delivery of available documents in either electronic or hard copy format.

Genomics of foodborne pathogens for microbial food safety.

PubMed

Allard, Marc W; Bell, Rebecca; Ferreira, Christina M; Gonzalez-Escalona, Narjol; Hoffmann, Maria; Muruvanda, Tim; Ottesen, Andrea; Ramachandran, Padmini; Reed, Elizabeth; Sharma, Shashi; Stevens, Eric; Timme, Ruth; Zheng, Jie; Brown, Eric W

2018-02-01

Whole genome sequencing (WGS) has been broadly used to provide detailed characterization of foodborne pathogens. These genomes for diverse species including Salmonella, Escherichia coli, Listeria, Campylobacter and Vibrio have provided great insight into the genetic make-up of these pathogens. Numerous government agencies, industry and academia have developed new applications in food safety using WGS approaches such as outbreak detection and characterization, source tracking, determining the root cause of a contamination event, profiling of virulence and pathogenicity attributes, antimicrobial resistance monitoring, quality assurance for microbiology testing, as well as many others. The future looks bright for additional applications that come with the new technologies and tools in genomics and metagenomics. Published by Elsevier Ltd.

How safe is safe enough. The relation of environmental characteristics and economic competitiveness in fusion-reactor design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holdren, J.P.

The need for fusion energy depends strongly on fusion's potential to achieve ambitious safety goals more completely or more economically than fission can. The history and present complexion of public opinion about environment and safety gives little basis for expecting either that these concerns will prove to be a passing fad or that the public will make demands for zero risk that no energy source can meet. Hazard indices based on ''worst case'' accidents and exposures should be used as design tools to promote combinations of fusion-reactor materials and configurations that bring the worst cases down to levels small comparedmore » to the hazards people tolerate from electricity at the point of end use. It may well be possible, by building such safety into fusion from the ground up, to accomplish this goal at costs competitive with other inexhaustible electricity sources. Indeed, the still rising and ultimately indeterminate costs of meeting safety and environmental requirements in nonbreeder fission reactors and coal-burning power plants mean that fusion reactors meeting ambitious safety goals may be able to compete economically with these ''interim'' electricity sources as well.« less

IAEA Coordinated Research Project on HTGR Reactor Physics, Thermal-hydraulics and Depletion Uncertainty Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strydom, Gerhard; Bostelmann, F.

The continued development of High Temperature Gas Cooled Reactors (HTGRs) requires verification of HTGR design and safety features with reliable high fidelity physics models and robust, efficient, and accurate codes. The predictive capability of coupled neutronics/thermal-hydraulics and depletion simulations for reactor design and safety analysis can be assessed with sensitivity analysis (SA) and uncertainty analysis (UA) methods. Uncertainty originates from errors in physical data, manufacturing uncertainties, modelling and computational algorithms. (The interested reader is referred to the large body of published SA and UA literature for a more complete overview of the various types of uncertainties, methodologies and results obtained).more » SA is helpful for ranking the various sources of uncertainty and error in the results of core analyses. SA and UA are required to address cost, safety, and licensing needs and should be applied to all aspects of reactor multi-physics simulation. SA and UA can guide experimental, modelling, and algorithm research and development. Current SA and UA rely either on derivative-based methods such as stochastic sampling methods or on generalized perturbation theory to obtain sensitivity coefficients. Neither approach addresses all needs. In order to benefit from recent advances in modelling and simulation and the availability of new covariance data (nuclear data uncertainties) extensive sensitivity and uncertainty studies are needed for quantification of the impact of different sources of uncertainties on the design and safety parameters of HTGRs. Only a parallel effort in advanced simulation and in nuclear data improvement will be able to provide designers with more robust and well validated calculation tools to meet design target accuracies. In February 2009, the Technical Working Group on Gas-Cooled Reactors (TWG-GCR) of the International Atomic Energy Agency (IAEA) recommended that the proposed Coordinated Research Program (CRP) on the HTGR Uncertainty Analysis in Modelling (UAM) be implemented. This CRP is a continuation of the previous IAEA and Organization for Economic Co-operation and Development (OECD)/Nuclear Energy Agency (NEA) international activities on Verification and Validation (V&V) of available analytical capabilities for HTGR simulation for design and safety evaluations. Within the framework of these activities different numerical and experimental benchmark problems were performed and insight was gained about specific physics phenomena and the adequacy of analysis methods.« less

Liquefied natural gas (LNG) safety

NASA Technical Reports Server (NTRS)

Ordin, P. M.

1977-01-01

Bibliography, assembled from computer search of NASA Aerospace Safety Data Bank, including title of report, author, abstract, source, description of figures, key references, and key words or subject terms. Publication is indexed by key subjects and by authors. Items are relevant to design engineers and safety specialists.

30 CFR 77.1434 - Retirement criteria.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Personnel... corrosion; (e) Distortion of the rope structure; (f) Heat damage from any source; (g) Diameter reduction due...

BikeMaps.org: A Global Tool for Collision and Near Miss Mapping

PubMed Central

Nelson, Trisalyn A.; Denouden, Taylor; Jestico, Benjamin; Laberee, Karen; Winters, Meghan

2015-01-01

There are many public health benefits to cycling, such as chronic disease reduction and improved air quality. Real and perceived concerns about safety are primary barriers to new ridership. Due to limited forums for official reporting of cycling incidents, lack of comprehensive data is limiting our ability to study cycling safety and conduct surveillance. Our goal is to introduce BikeMaps.org, a new website developed by the authors for crowd-source mapping of cycling collisions and near misses. BikeMaps.org is a global mapping system that allows citizens to map locations of cycling incidents and report on the nature of the event. Attributes collected are designed for spatial modeling research on predictors of safety and risk, and to aid surveillance and planning. Released in October 2014, within 2 months the website had more than 14,000 visitors and mapping in 14 countries. Collisions represent 38% of reports (134/356) and near misses 62% (222/356). In our pilot city, Victoria, Canada, citizens mapped data equivalent to about 1 year of official cycling collision reports within 2 months via BikeMaps.org. Using report completeness as an indicator, early reports indicate that data are of high quality with 50% being fully attributed and another 10% having only one missing attribute. We are advancing this technology, with the development of a mobile App, improved data visualization, real-time altering of hazard reports, and automated open-source tools for data sharing. Researchers and citizens interested in utilizing the BikeMaps.org technology can get involved by encouraging citizen mapping in their region. PMID:25870852

BikeMaps.org: A Global Tool for Collision and Near Miss Mapping.

PubMed

Nelson, Trisalyn A; Denouden, Taylor; Jestico, Benjamin; Laberee, Karen; Winters, Meghan

2015-01-01

There are many public health benefits to cycling, such as chronic disease reduction and improved air quality. Real and perceived concerns about safety are primary barriers to new ridership. Due to limited forums for official reporting of cycling incidents, lack of comprehensive data is limiting our ability to study cycling safety and conduct surveillance. Our goal is to introduce BikeMaps.org, a new website developed by the authors for crowd-source mapping of cycling collisions and near misses. BikeMaps.org is a global mapping system that allows citizens to map locations of cycling incidents and report on the nature of the event. Attributes collected are designed for spatial modeling research on predictors of safety and risk, and to aid surveillance and planning. Released in October 2014, within 2 months the website had more than 14,000 visitors and mapping in 14 countries. Collisions represent 38% of reports (134/356) and near misses 62% (222/356). In our pilot city, Victoria, Canada, citizens mapped data equivalent to about 1 year of official cycling collision reports within 2 months via BikeMaps.org. Using report completeness as an indicator, early reports indicate that data are of high quality with 50% being fully attributed and another 10% having only one missing attribute. We are advancing this technology, with the development of a mobile App, improved data visualization, real-time altering of hazard reports, and automated open-source tools for data sharing. Researchers and citizens interested in utilizing the BikeMaps.org technology can get involved by encouraging citizen mapping in their region.

Safeguard: Progress and Test Results for a Reliable Independent On-Board Safety Net for UAS

NASA Technical Reports Server (NTRS)

Young, Steven D.; Dill, Evan T.; Hayhurst, Kelly J.; Gilabert, Russell V.

2017-01-01

As demands increase to use unmanned aircraft systems (UAS) for a broad spectrum of commercial applications, regulatory authorities are examining how to safely integrate them without compromising safety or disrupting traditional airspace operations. For small UAS, several operational rules have been established; e.g., do not operate beyond visual line-of-sight, do not fly within five miles of a commercial airport, do not fly above 400 feet above ground level. Enforcing these rules is challenging for UAS, as evidenced by the number of incident reports received by the Federal Aviation Administration (FAA). This paper reviews the development of an onboard system - Safeguard - designed to monitor and enforce conformance to a set of operational rules defined prior to flight (e.g., geospatial stay-out or stay-in regions, speed limits, and altitude constraints). Unlike typical geofencing or geo-limitation functions, Safeguard operates independently of the off-the-shelf UAS autopilot and is designed in a way that can be realized by a small set of verifiable functions to simplify compliance with existing standards for safety-critical systems (e.g. for spacecraft and manned commercial transportation aircraft systems). A framework is described that decouples the system from any other devices on the UAS as well as introduces complementary positioning source(s) for applications that require integrity and availability beyond what can be provided by the Global Positioning System (GPS). This paper summarizes the progress and test results for Safeguard research and development since presentation of the design concept at the 35th Digital Avionics Systems Conference (DASC '16). Significant accomplishments include completion of software verification and validation in accordance with NASA standards for spacecraft systems (to Class B), development of improved hardware prototypes, development of a simulation platform that allows for hardware-in-the-loop testing and fast-time Monte Carlo evaluations, and flight testing on multiple air vehicles. Integration testing with NASA's UAS Traffic Management (UTM) service-oriented architecture was also demonstrated.

Using narrative text and coded data to develop hazard scenarios for occupational injury interventions

PubMed Central

Lincoln, A; Sorock, G; Courtney, T; Wellman, H; Smith, G; Amoroso, P

2004-01-01

Objective: To determine whether narrative text in safety reports contains sufficient information regarding contributing factors and precipitating mechanisms to prioritize occupational back injury prevention strategies. Design, setting, subjects, and main outcome measures: Nine essential data elements were identified in narratives and coded sections of safety reports for each of 94 cases of back injuries to United States Army truck drivers reported to the United States Army Safety Center between 1987 and 1997. The essential elements of each case were used to reconstruct standardized event sequences. A taxonomy of the event sequences was then developed to identify common hazard scenarios and opportunities for primary interventions. Results: Coded data typically only identified five data elements (broad activity, task, event/exposure, nature of injury, and outcomes) while narratives provided additional elements (contributing factor, precipitating mechanism, primary source) essential for developing our taxonomy. Three hazard scenarios were associated with back injuries among Army truck drivers accounting for 83% of cases: struck by/against events during motor vehicle crashes; falls resulting from slips/trips or loss of balance; and overexertion from lifting activities. Conclusions: Coded data from safety investigations lacked sufficient information to thoroughly characterize the injury event. However, the combination of existing narrative text (similar to that collected by many injury surveillance systems) and coded data enabled us to develop a more complete taxonomy of injury event characteristics and identify common hazard scenarios. This study demonstrates that narrative text can provide the additional information on contributing factors and precipitating mechanisms needed to target prevention strategies. PMID:15314055

Effectiveness of Direct Safety Regulations on Manufacturers and Users of Industrial Machines: Its Implications on Industrial Safety Policies in Republic of Korea.

PubMed

Choi, Gi Heung

2017-03-01

Despite considerable efforts made in recent years, the industrial accident rate and the fatality rate in the Republic of Korea are much higher than those in most developed countries in Europe and North America. Industrial safety policies and safety regulations are also known to be ineffective and inefficient in some cases. This study focuses on the quantitative evaluation of the effectiveness of direct safety regulations such as safety certification, self-declaration of conformity, and safety inspection of industrial machines in the Republic of Korea. Implications on safety policies to restructure the industrial safety system associated with industrial machines are also explored. Analysis of causes in industrial accidents associated with industrial machines confirms that technical causes need to be resolved to reduce both the frequency and the severity of such industrial accidents. Statistical analysis also confirms that the indirect effects of safety device regulation on users are limited for a variety of reasons. Safety device regulation needs to be shifted to complement safety certification and self-declaration of conformity for more balanced direct regulations on manufacturers and users. An example of cost-benefit analysis on conveyor justifies such a transition. Industrial safety policies and regulations associated with industrial machines must be directed towards eliminating the sources of danger at the stage of danger creation, thereby securing the safe industrial machines. Safety inspection further secures the safety of workers at the stage of danger use. The overall balance between such safety regulations is achieved by proper distribution of industrial machines subject to such regulations and the intensity of each regulation. Rearrangement of industrial machines subject to safety certification and self-declaration of conformity to include more movable industrial machines and other industrial machines with a high level of danger is also suggested.

Alternative medicine safety: Agaricus blazei and propolis.

PubMed

Sorimachi, Kenji; Nakamoto, Takaaki

2011-08-01

All medicines pose a potential health risk, be they Eastern or Western medicines. Newly developed Western drugs must undergo rigorous testing to ensure their efficacy and safety, while with Eastern drugs, safety has generally been established because of their long histories of safe usage as traditional medicines. The regulation of Western medicines is much stronger than that of Eastern medicines, partly as pure chemicals are used and their effects and side effects are more likely to be acute. Eastern medicines consist of multiple components, generally extracted from a single or several plants or other natural sources, and their effects are not so acute, with delayed onset of side effects. However, the chronic usage of many Eastern medicines may result in the gradual accumulation of toxic compounds in the body. For example, Agaricus blazei extracts have been used as alternative medicines for cancer, but contain the known carcinogen agaritine (this carcinogen is also present in Agaricus bisporus). To ensure the safety of this alternative medicine, agaritine should be removed or its content reduced if the extract is to be taken chronically. Clearly, the safety of not only pure medicines, but also alternative medicines and daily foods, should be carefully controlled.

Survey of food safety practices on small to medium-sized farms and in farmers markets.

PubMed

Harrison, Judy A; Gaskin, Julia W; Harrison, Mark A; Cannon, Jennifer L; Boyer, Renee R; Zehnder, Geoffrey W

2013-11-01

As produce consumption has increased, so have foodborne disease outbreaks associated with fresh produce. Little research has addressed food safety practices used on small to medium-sized farms selling locally or in farmers markets. This study evaluated current food safety practices used by farmers on small to medium-sized farms and managers of farmers markets in Georgia, Virginia, and South Carolina based on responses to surveys. Surveys were developed, pretested, and revised before implementation with target audiences and were implemented via mail and the Web to maximize participation, with reminders sent to nonrespondents. Data were collected from 226 farmers and 45 market managers. Frequencies and percentages were calculated for all response variables. Responses from farmers indicated that more than 56% of them use manures. Of those who use manures, 34% use raw or mixtures of raw and composted manure, and over 26% wait fewer than 90 days between application of raw manure and harvest. Over 27% use water sources that have not been tested for safety for irrigation, and 16% use such water sources for washing produce. Over 43% do not sanitize surfaces that touch produce at the farm. Only 33% of farmers always clean transport containers between uses. Responses from market managers indicated that over 42% have no food safety standards in place for the market. Only 2 to 11% ask farmers specific questions about conditions on the farm that could affect product safety. Less than 25% of managers sanitize market surfaces. Only 11% always clean market containers between uses. Over 75% of markets offer no sanitation training to workers or vendors. While farmers and market managers are using many good practices, the results indicate that some practices being used may put consumers at risk of foodborne illness. Consequently, there is a need for training for both farmers and market managers.

Radiological Safety Handbook.

ERIC Educational Resources Information Center

Army Ordnance Center and School, Aberdeen Proving Ground, MD.

Written to be used concurrently with the U.S. Army's Radiological Safety Course, this publication discusses the causes, sources, and detection of nuclear radiation. In addition, the transportation and disposal of radioactive materials are covered. The report also deals with the safety precautions to be observed when working with lasers, microwave…

30 CFR 57.4501 - Fuel lines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and Control... stopping the flow of fuel at the source and shall be located and maintained to minimize fire hazards. This...

30 CFR 56.4501 - Fuel lines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Fire Prevention and Control... stopping the flow of fuel at the source and shall be located and maintained to minimize fire hazards. This...

High Power Laser Safety

NASA Astrophysics Data System (ADS)

Brusl, Helmut

1986-10-01

The Austrian legislation about laser safety is discussed. Appropriate control measures for laser use and alternate means of enclosure and baffling are presented. Present laser safety standards are explained briefly. Eye protective techniques and eyewear are considered for a variety of sources. The optical properties of enclosure materials are also discussed.

30 CFR 75.1434 - Retirement criteria.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Hoisting and Mantrips Wire Ropes § 75.1434 Retirement... structure; (f) Heat damage from any source; (g) Diameter reduction due to wear that exceeds six percent of...

Sorting Through the Safety Data Haystack: Using Machine Learning to Identify Individual Case Safety Reports in Social-Digital Media.

PubMed

Comfort, Shaun; Perera, Sujan; Hudson, Zoe; Dorrell, Darren; Meireis, Shawman; Nagarajan, Meenakshi; Ramakrishnan, Cartic; Fine, Jennifer

2018-06-01

There is increasing interest in social digital media (SDM) as a data source for pharmacovigilance activities; however, SDM is considered a low information content data source for safety data. Given that pharmacovigilance itself operates in a high-noise, lower-validity environment without objective 'gold standards' beyond process definitions, the introduction of large volumes of SDM into the pharmacovigilance workflow has the potential to exacerbate issues with limited manual resources to perform adverse event identification and processing. Recent advances in medical informatics have resulted in methods for developing programs which can assist human experts in the detection of valid individual case safety reports (ICSRs) within SDM. In this study, we developed rule-based and machine learning (ML) models for classifying ICSRs from SDM and compared their performance with that of human pharmacovigilance experts. We used a random sampling from a collection of 311,189 SDM posts that mentioned Roche products and brands in combination with common medical and scientific terms sourced from Twitter, Tumblr, Facebook, and a spectrum of news media blogs to develop and evaluate three iterations of an automated ICSR classifier. The ICSR classifier models consisted of sub-components to annotate the relevant ICSR elements and a component to make the final decision on the validity of the ICSR. Agreement with human pharmacovigilance experts was chosen as the preferred performance metric and was evaluated by calculating the Gwet AC1 statistic (gKappa). The best performing model was tested against the Roche global pharmacovigilance expert using a blind dataset and put through a time test of the full 311,189-post dataset. During this effort, the initial strict rule-based approach to ICSR classification resulted in a model with an accuracy of 65% and a gKappa of 46%. Adding an ML-based adverse event annotator improved the accuracy to 74% and gKappa to 60%. This was further improved by the addition of an additional ML ICSR detector. On a blind test set of 2500 posts, the final model demonstrated a gKappa of 78% and an accuracy of 83%. In the time test, it took the final model 48 h to complete a task that would have taken an estimated 44,000 h for human experts to perform. The results of this study indicate that an effective and scalable solution to the challenge of ICSR detection in SDM includes a workflow using an automated ML classifier to identify likely ICSRs for further human SME review.

Development of a generalized perturbation theory method for sensitivity analysis using continuous-energy Monte Carlo methods

DOE PAGES

Perfetti, Christopher M.; Rearden, Bradley T.

2016-03-01

The sensitivity and uncertainty analysis tools of the ORNL SCALE nuclear modeling and simulation code system that have been developed over the last decade have proven indispensable for numerous application and design studies for nuclear criticality safety and reactor physics. SCALE contains tools for analyzing the uncertainty in the eigenvalue of critical systems, but cannot quantify uncertainty in important neutronic parameters such as multigroup cross sections, fuel fission rates, activation rates, and neutron fluence rates with realistic three-dimensional Monte Carlo simulations. A more complete understanding of the sources of uncertainty in these design-limiting parameters could lead to improvements in processmore » optimization, reactor safety, and help inform regulators when setting operational safety margins. A novel approach for calculating eigenvalue sensitivity coefficients, known as the CLUTCH method, was recently explored as academic research and has been found to accurately and rapidly calculate sensitivity coefficients in criticality safety applications. The work presented here describes a new method, known as the GEAR-MC method, which extends the CLUTCH theory for calculating eigenvalue sensitivity coefficients to enable sensitivity coefficient calculations and uncertainty analysis for a generalized set of neutronic responses using high-fidelity continuous-energy Monte Carlo calculations. Here, several criticality safety systems were examined to demonstrate proof of principle for the GEAR-MC method, and GEAR-MC was seen to produce response sensitivity coefficients that agreed well with reference direct perturbation sensitivity coefficients.« less

A novel approach to enhance food safety: industry-academia-government partnership for applied research.

PubMed

Osterholm, Michael T; Ostrowsky, Julie; Farrar, Jeff A; Gravani, Robert B; Tauxe, Robert V; Buchanan, Robert L; Hedberg, Craig W

2009-07-01

An independent collaborative approach was developed for stimulating research on high-priority food safety issues. The Fresh Express Produce Safety Research Initiative was launched in 2007 with $2 million in unrestricted funds from industry and independent direction and oversight from a scientific advisory panel consisting of nationally recognized food safety experts from academia and government agencies. The program had two main objectives: (i) to fund rigorous, innovative, and multidisciplinary research addressing the safety of lettuce, spinach, and other leafy greens and (ii) to share research findings as widely and quickly as possible to support the development of advanced safeguards within the fresh-cut produce industry. Sixty-five proposals were submitted in response to a publicly announced request for proposals and were competitively evaluated. Nine research projects were funded to examine underlying factors involved in Escherichia coli O157:H7 contamination of lettuce, spinach, and other leafy greens and potential strategies for preventing the spread of foodborne pathogens. Results of the studies, published in the Journal of Food Protection, help to identify promising directions for future research into potential sources and entry points of contamination and specific factors associated with harvesting, processing, transporting, and storing produce that allow contaminants to persist and proliferate. The program provides a model for leveraging the strengths of industry, academia, and government to address high-priority issues quickly and directly through applied research. This model can be productively extended to other pathogens and other leafy and nonleafy produce.

Evaluation of radiological dispersion/consequence codes supporting DOE nuclear facility SARs

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Kula, K.R.; Paik, I.K.; Chung, D.Y.

1996-12-31

Since the early 1990s, the authorization basis documentation of many U.S. Department of Energy (DOE) nuclear facilities has been upgraded to comply with DOE orders and standards. In this process, many safety analyses have been revised. Unfortunately, there has been nonuniform application of software, and the most appropriate computer and engineering methodologies often are not applied. A DOE Accident Phenomenology and Consequence (APAC) Methodology Evaluation Program was originated at the request of DOE Defense Programs to evaluate the safety analysis methodologies used in nuclear facility authorization basis documentation and to define future cost-effective support and development initiatives. Six areas, includingmore » source term development (fire, spills, and explosion analysis), in-facility transport, and dispersion/ consequence analysis (chemical and radiological) are contained in the APAC program. The evaluation process, codes considered, key results, and recommendations for future model and software development of the Radiological Dispersion/Consequence Working Group are summarized in this paper.« less

A Suggested Model for Building Robust Biomedical Implants Registries.

PubMed

Aloufi, Bader; Alshagathrah, Fahad; Househ, Mowafa

2017-01-01

Registries are an essential source of information for clinical and non-clinical decision-makers; because they provide evidence for post-market clinical follow-up and early detection of safety signals for biomedical implants. Yet, many of todays biomedical implants registries are facing a variety of challenges relating to a poorly designed dataset, the reliability of inputted data and low clinician and patient participation. The purpose of this paper is to present a best practice model for the implementation and use of biomedical implants registries to monitor the safety and effectiveness of implantable medical devices. Based on a literature review and an analysis of multiple national relevant registries, we identified six factors that address contemporary challenges and are believed to be the keys for building a successful biomedical implants registry, which include: sustainable development, international comparability, data reliability, purposeful design, ease of patient participation, and collaborative development at the national level.

Smart Multifunctional Fluids for Lithium Ion Batteries: Enhanced Rate Performance and Intrinsic Mechanical Protection

NASA Astrophysics Data System (ADS)

Ding, Jie; Tian, Tongfei; Meng, Qing; Guo, Zaiping; Li, Weihua; Zhang, Peng; Ciacchi, Fabio T.; Huang, Jewel; Yang, Wenrong

2013-08-01

Lithium ion batteries are attractive power sources for the consumer electronics market and are being aggressively developed for road transportation. Nevertheless, issues with safety and reliability need to be solved prior to the large-scale uptake of these batteries. There have recently been significant development and assessment of materials with resistance to mechanical abuse, with the aims of reinforcing the battery and preventing puncturing during a crash. Most of the work on battery mechanical safety has concentrated on the external packaging of batteries, with little attention being paid to the enclosed electrolyte. We report on smart multifunctional fluids that act as both highly conductive electrolytes and intrinsic mechanical protectors for lithium ion batteries. These fluids exhibit a shear thickening effect under pressure or impact and thus demonstrate excellent resistance to crushing. Also, the fluids show higher ionic conductivities and comparable redox stability windows to the commercial liquid electrolytes.

Information Extraction for System-Software Safety Analysis: Calendar Year 2007 Year-End Report

NASA Technical Reports Server (NTRS)

Malin, Jane T.

2008-01-01

This annual report describes work to integrate a set of tools to support early model-based analysis of failures and hazards due to system-software interactions. The tools perform and assist analysts in the following tasks: 1) extract model parts from text for architecture and safety/hazard models; 2) combine the parts with library information to develop the models for visualization and analysis; 3) perform graph analysis on the models to identify possible paths from hazard sources to vulnerable entities and functions, in nominal and anomalous system-software configurations; 4) perform discrete-time-based simulation on the models to investigate scenarios where these paths may play a role in failures and mishaps; and 5) identify resulting candidate scenarios for software integration testing. This paper describes new challenges in a NASA abort system case, and enhancements made to develop the integrated tool set.

Radiation safety standards and their application: international policies and current issues.

PubMed

González, Abel J

2004-09-01

This paper briefly describes the current policies of the United Nations Scientific Committee on the Effects of Atomic Radiation and the International Commission on Radiological Protection and how these policies are converted into international radiation safety standards by the International Atomic Energy Agency, which is the only global organization-within the United Nations family of international agencies-with a statutory mandate not only to establish such standards but also to provide for their application. It also summarizes the current status of the established corpus of such international standards, and of it foreseeable evolution, as well as of legally binding undertakings by countries around the world that are linked to these standards. Moreover, this paper also reviews some major current global issues related to the application of international standards, including the following: strengthening of national infrastructures for radiation safety, including technical cooperation programs for assisting developing countries; occupational radiation safety challenges, including the protection of pregnant workers and their unborn children, dealing with working environments with high natural radiation levels, and occupational attributability of health effects (probability of occupational causation); restricting discharges of radioactive substances into the environment: reviewing current international policies vis-a-vis the growing concern on the radiation protection of the "environment;" radiological protection of patients undergoing radiodiagnostic and radiotherapeutic procedures: the current International Action Plan; safety and security of radiation sources: post-11 September developments; preparedness and response to radiation emergencies: enhancing the international network; safe transport of radioactive materials: new apprehensions; safety of radioactive waste management: concerns and connections with radiation protection; and radioactive residues remaining after the termination of activities: radiation protection response to the forthcoming wave of decommissioning of installations with radioactive materials. The ultimate aim of this paper is to encourage information exchange, cooperation, and collaboration within the radiation protection professional community. In particular, the paper tries to facilitate consolidation of the growing international regime on radiation safety, including the expansion of legally binding undertakings by countries, the strengthening of the current corpus of international radiation safety standards, and the development of international provisions for ensuring the proper worldwide application of these standards, such as a system of international appraisals by peer review.

A novel library-independent approach based on high-throughput cultivation in Bioscreen and fingerprinting by FTIR spectroscopy for microbial source tracking in food industry.

PubMed

Shapaval, V; Møretrø, T; Wold Åsli, A; Suso, H P; Schmitt, J; Lillehaug, D; Kohler, A

2017-05-01

Microbiological source tracking (MST) for food industry is a rapid growing area of research and technology development. In this paper, a new library-independent approach for MST is presented. It is based on a high-throughput liquid microcultivation and FTIR spectroscopy. In this approach, FTIR spectra obtained from micro-organisms isolated along the production line and a product are compared to each other. We tested and evaluated the new source tracking approach by simulating a source tracking situation. In this simulation study, a selection of 20 spoilage mould strains from a total of six genera (Alternaria, Aspergillus, Mucor, Paecilomyces, Peyronellaea and Phoma) was used. The simulation of the source tracking situation showed that 80-100% of the sources could be correctly identified with respect to genus/species level. When performing source tracking simulations, the FTIR identification diverged for Phoma glomerata strain in the reference collection. When reidentifying the strain by sequencing, it turned out that the strain was a Peyronellaea arachidicola. The obtained results demonstrated that the proposed approach is a versatile tool for identifying sources of microbial contamination. Thus, it has a high potential for routine control in the food industry due to low costs and analysis time. The source tracking of fungal contamination in the food industry is an important aspect of food safety. Currently, all available methods are time consuming and require the use of a reference library that may limit the accuracy of the identification. In this study, we report for the first time, a library-independent FTIR spectroscopic approach for MST of fungal contamination along the food production line. It combines high-throughput microcultivation and FTIR spectroscopy and is specific on the genus and species level. Therefore, such an approach possesses great importance for food safety control in food industry. © 2016 The Society for Applied Microbiology.

What determines the acceptability of genetically modified food that can improve human nutrition?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Purchase, Iain F.H.

It has been predicted that by 2025 there will be an annual shortfall of cereals for feeding the human population of 68.5 million tonnes. One possible solution is the use of genetically modified (GM) crops, which are already grown extensively (59 million ha of GM crops were planted in 2002) in the USA, South America, Africa and China. Nevertheless, there is considerable disagreement about the advisability of using such crops, particularly in Europe. Obviously, the safety of the food derived from the GM crops is a primary consideration. Safety assessment relies on establishing that the food is substantially equivalent tomore » its non-GM counterpart and specific testing for allergenicity of proteins and toxicity of metabolites and the whole food. There appears to be international agreement on the principles of safety assessment. Safety to the environment is equally important, but will not be covered in this presentation. The public's perception of the risk of new technology is critical to its acceptance. Perception of risk, in turn, depends on the credibility of the source of the information and trust in the regulatory process. In many countries, the public appears to have lost its trust in the scientists and government dealing with GM food, making the acceptability of GM crops uncertain. Of equal importance are the socio-economic factors that impinge on the viability of GM produce. These include intellectual property protection, trade liberalisation (through subsidy and tariff barriers in developed countries) and the intensity of bio safety regulations. The socio-economic interests of developed and developing countries may diverge and may even be contradictory in any one country. Acceptance of GM crops will thus depend on detailed issues surrounding particular crops and economies.« less

What determines the acceptability of genetically modified food that can improve human nutrition?

PubMed

Purchase, Iain F H

2005-09-01

It has been predicted that by 2025 there will be an annual shortfall of cereals for feeding the human population of 68.5 million tones. One possible solution is the use of genetically modified (GM) crops, which are already grown extensively (59 million ha of GM crops were planted in 2002) in the USA, South America, Africa and China. Nevertheless, there is considerable disagreement about the advisability of using such crops, particularly in Europe. Obviously, the safety of the food derived from the GM crops is a primary consideration. Safety assessment relies on establishing that the food is substantially equivalent to its non-GM counterpart and specific testing for allergenicity of proteins and toxicity of metabolites and the whole food. There appears to be international agreement on the principles of safety assessment. Safety to the environment is equally important, but will not be covered in this presentation. The public's perception of the risk of new technology is critical to its acceptance. Perception of risk, in turn, depends on the credibility of the source of the information and trust in the regulatory process. In many countries, the public appears to have lost its trust in the scientists and government dealing with GM food, making the acceptability of GM crops uncertain. Of equal importance are the socio-economic factors that impinge on the viability of GM produce. These include intellectual property protection, trade liberalization (through subsidy and tariff barriers in developed countries) and the intensity of bio safety regulations. The socio-economic interests of developed and developing countries may diverge and may even be contradictory in any one country. Acceptance of GM crops will thus depend on detailed issues surrounding particular crops and economies.

Antecedents of willingness to report medical treatment errors in health care organizations: a multilevel theoretical framework.

PubMed

Naveh, Eitan; Katz-Navon, Tal

2014-01-01

To avoid errors and improve patient safety and quality of care, health care organizations need to identify the sources of failures and facilitate implementation of corrective actions. Hence, health care organizations try to collect reports and data about errors by investing enormous resources in reporting systems. However, despite health care organizations' declared goal of increasing the voluntary reporting of errors and although the Patient Safety and Quality Improvement Act of 2005 (S.544, Public Law 109-41) legalizes efforts to secure reporters from specific liabilities, the problem of underreporting of adverse events by staff members remains. The purpose of the paper is to develop a theory-based model and a set of propositions to understand the antecedents of staff members' willingness to report errors based on a literature synthesis. The model aims to explore a complex system of considerations employees use when deciding whether to report their errors or be silent about them. The model integrates the influences of three types of organizational climates (psychological safety, psychological contracts, and safety climate) and individual perceptions of the applicability of the organization's procedures and proposes their mutual influence on willingness to report errors and, as a consequence, patient safety. The model suggests that managers should try to control and influence both the way employees perceive procedure applicability and organizational context-i.e., psychological safety, no-blame contracts, and safety climate-to increase reporting and improve patient safety.

Issues of Food Chain Security and Case Studies in the Czech Army

NASA Astrophysics Data System (ADS)

Komar, Ales; Vasicka, Pavlina

Food supply system is fundamental extremely open complex. Global challenge is acknowledged and must be considered because food is important source of existence and can be used as a desirable terrorist vehicle. Raw material and food featured intentional versus accidental contamination. Manifestation of global challenges, aspiration for sustainable development and appearance of terrorism create the new paradigm for threats to food safety and defence management.

Check-Cases for Verification of 6-Degree-of-Freedom Flight Vehicle Simulations. Volume 2; Appendices

NASA Technical Reports Server (NTRS)

Murri, Daniel G.; Jackson, E. Bruce; Shelton, Robert O.

2015-01-01

This NASA Engineering and Safety Center (NESC) assessment was established to develop a set of time histories for the flight behavior of increasingly complex example aerospacecraft that could be used to partially validate various simulation frameworks. The assessment was conducted by representatives from several NASA Centers and an open-source simulation project. This document contains details on models, implementation, and results.

Progress on the Development of Future Airport Surface Wireless Communications Network

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.; Budinger, James M.; Brooks, David E.; Franklin, Morgan; DeHart, Steve; Dimond, Robert P.; Borden, Michael

2009-01-01

Continuing advances in airport surface management and improvements in airport surface safety are required to enable future growth in air traffic throughout the airspace, as airport arrival and departure delays create a major system bottleneck. These airport management and safety advances will be built upon improved communications, navigation, surveillance, and weather sensing, creating an information environment supporting system automation. The efficient movement of the digital data generated from these systems requires an underlying communications network infrastructure to connect data sources with the intended users with the required quality of service. Current airport surface communications consists primarily of buried copper or fiber cable. Safety related communications with mobile airport surface assets occurs over 25 kHz VHF voice and data channels. The available VHF spectrum, already congested in many areas, will be insufficient to support future data traffic requirements. Therefore, a broadband wireless airport surface communications network is considered a requirement for the future airport component of the air transportation system. Progress has been made on defining the technology and frequency spectrum for the airport surface wireless communications network. The development of a test and demonstration facility and the definition of required testing and standards development are now underway. This paper will review the progress and planned future work.

Public perception of drinking water safety in South Africa 2002–2009: a repeated cross-sectional study

PubMed Central

2012-01-01

Background In low and middle income countries, public perceptions of drinking water safety are relevant to promotion of household water treatment and to household choices over drinking water sources. However, most studies of this topic have been cross-sectional and not considered temporal variation in drinking water safety perceptions. The objective of this study is to explore trends in perceived drinking water safety in South Africa and its association with disease outbreaks, water supply and household characteristics. Methods This repeated cross-sectional study draws on General Household Surveys from 2002–2009, a series of annual nationally representative surveys of South African households, which include a question about perceived drinking water safety. Trends in responses to this question were examined from 2002–2009 in relation to reported cholera cases. The relationship between perceived drinking water safety and organoleptic qualities of drinking water, supply characteristics, and socio-economic and demographic household characteristics was explored in 2002 and 2008 using hierarchical stepwise logistic regression. Results The results suggest that perceived drinking water safety has remained relatively stable over time in South Africa, once the expansion of improved supplies is controlled for. A large cholera outbreak in 2000–02 had no apparent effect on public perception of drinking water safety in 2002. Perceived drinking water safety is primarily related to water taste, odour, and clarity rather than socio-economic or demographic characteristics. Conclusion This suggests that household perceptions of drinking water safety in South Africa follow similar patterns to those observed in studies in developed countries. The stability over time in public perception of drinking water safety is particularly surprising, given the large cholera outbreak that took place at the start of this period. PMID:22834485

Public perception of drinking water safety in South Africa 2002-2009: a repeated cross-sectional study.

PubMed

Wright, Jim A; Yang, Hong; Rivett, Ulrike; Gundry, Stephen W

2012-07-27

In low and middle income countries, public perceptions of drinking water safety are relevant to promotion of household water treatment and to household choices over drinking water sources. However, most studies of this topic have been cross-sectional and not considered temporal variation in drinking water safety perceptions. The objective of this study is to explore trends in perceived drinking water safety in South Africa and its association with disease outbreaks, water supply and household characteristics. This repeated cross-sectional study draws on General Household Surveys from 2002-2009, a series of annual nationally representative surveys of South African households, which include a question about perceived drinking water safety. Trends in responses to this question were examined from 2002-2009 in relation to reported cholera cases. The relationship between perceived drinking water safety and organoleptic qualities of drinking water, supply characteristics, and socio-economic and demographic household characteristics was explored in 2002 and 2008 using hierarchical stepwise logistic regression. The results suggest that perceived drinking water safety has remained relatively stable over time in South Africa, once the expansion of improved supplies is controlled for. A large cholera outbreak in 2000-02 had no apparent effect on public perception of drinking water safety in 2002. Perceived drinking water safety is primarily related to water taste, odour, and clarity rather than socio-economic or demographic characteristics. This suggests that household perceptions of drinking water safety in South Africa follow similar patterns to those observed in studies in developed countries. The stability over time in public perception of drinking water safety is particularly surprising, given the large cholera outbreak that took place at the start of this period.

Driving and dementia

PubMed Central

Lee, Linda; Molnar, Frank

2017-01-01

Abstract Objective To provide primary care physicians with an approach to driving safety concerns when older persons present with memory difficulties. Sources of information The approach is based on an accredited memory clinic training program developed by the Centre for Family Medicine Primary Care Collaborative Memory Clinic. Main message One of the most challenging aspects of dementia care is the assessment of driving safety. Drivers with dementia are at higher risk of motor vehicle collisions, yet many drivers with mild dementia might be safely able to continue driving for several years. Because safe driving is dependent on multiple cognitive and functional skills, clinicians should carefully consider many factors when determining if cognitive concerns affect driving safety. Specific findings on corroborated history and office-based cognitive testing might aid in the physician’s decisions to refer for comprehensive on-road driving evaluation and whether to notify transportation authorities in accordance with provincial reporting requirements. Sensitive communication and a person-centred approach are essential. Conclusion Primary care physicians must consider many factors when determining if cognitive concerns might affect driving safety in older drivers. PMID:28115437

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Q., E-mail: wuq@impcas.ac.cn; Ma, H. Y.; Yang, Y.

Two compact intense 2.45 GHz permanent magnet proton sources and their corresponding low energy beam transport (LEBT) system were developed successfully for China accelerator driven sub-critical system in 2014. Both the proton sources operate at 35 kV potential. The beams extracted from the ion source are transported by the LEBT, which is composed of two identical solenoids, to the 2.1 MeV Radio-Frequency Quadrupole (RFQ). In order to ensure the safety of the superconducting cavities during commissioning, an electrostatic-chopper has been designed and installed in the LEBT line that can chop the continuous wave beam into a pulsed one. The minimummore » width of the pulse is less than 10 μs and the fall/rise time of the chopper is about 20 ns. The performance of the proton source and the LEBT, such as beam current, beam profile, emittance and the impact to RFQ injection will be presented.« less

Development of a Prototype Low-Voltage Electron Beam Freeform Fabrication System

NASA Technical Reports Server (NTRS)

Watson, J. K.; Taminger, K. M.; Hafley, R. A.; Petersen, D. D.

2002-01-01

NASA's Langley Research Center and Johnson Space Center are developing a solid freeform fabrication system utilizing an electron beam energy source and wire feedstock. This system will serve as a testbed for exploring the influence of gravitational acceleration on the deposition process and will be a simplified prototype for future systems that may be deployed during long-duration space missions for assembly, fabrication, and production of structural and mechanical replacement components. Critical attributes for this system are compactness, minimal mass, efficiency in use of feedstock material, energy use efficiency, and safety. The use of a low-voltage (less than 15kV) electron beam energy source will reduce radiation so that massive shielding is not required to protect adjacent personnel. Feedstock efficiency will be optimized by use of wire, and energy use efficiency will be achieved by use of the electron beam energy source. This system will be evaluated in a microgravity environment using the NASA KC-135A aircraft.

Safe clinical practice for patients hospitalised in a suicidal crisis: a study protocol for a qualitative case study.

PubMed

Berg, Siv Hilde; Rørtveit, Kristine; Walby, Fredrik A; Aase, Karina

2017-01-27

Suicide prevention in psychiatric care is arguably complex and incompletely understood as a patient safety issue. A resilient healthcare approach provides perspectives through which to understand this complexity by understanding everyday clinical practice. By including suicidal patients and healthcare professionals as sources of knowledge, a deeper understanding of what constitutes safe clinical practice can be achieved. This planned study aims to adopt the perspective of resilient healthcare to provide a deeper understanding of safe clinical practice for suicidal patients in psychiatric inpatient care. It will describe the experienced components and conditions of safe clinical practice and the experienced practice of patient safety. The study will apply a descriptive case study approach consisting of qualitative semistructured interviews and focus groups. The data sources are hospitalised patients in a suicidal crisis and healthcare professionals in clinical practice. This study was approved by the Regional Ethics Committee (2016/34). The results will be disseminated through scientific articles, a PhD dissertation, and national and international conferences. These findings can generate knowledge to be integrated into the practice of safety for suicidal inpatients in Norway and to improve the feasibility of patient safety measures. Theoretical generalisations can be drawn regarding safe clinical practice by taking into account the experiences of patients and healthcare professionals. Thus, this study can inform the conceptual development of safe clinical practice for suicidal patients. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Exploiting heterogeneous publicly available data sources for drug safety surveillance: computational framework and case studies.

PubMed

Koutkias, Vassilis G; Lillo-Le Louët, Agnès; Jaulent, Marie-Christine

2017-02-01

Driven by the need of pharmacovigilance centres and companies to routinely collect and review all available data about adverse drug reactions (ADRs) and adverse events of interest, we introduce and validate a computational framework exploiting dominant as well as emerging publicly available data sources for drug safety surveillance. Our approach relies on appropriate query formulation for data acquisition and subsequent filtering, transformation and joint visualization of the obtained data. We acquired data from the FDA Adverse Event Reporting System (FAERS), PubMed and Twitter. In order to assess the validity and the robustness of the approach, we elaborated on two important case studies, namely, clozapine-induced cardiomyopathy/myocarditis versus haloperidol-induced cardiomyopathy/myocarditis, and apixaban-induced cerebral hemorrhage. The analysis of the obtained data provided interesting insights (identification of potential patient and health-care professional experiences regarding ADRs in Twitter, information/arguments against an ADR existence across all sources), while illustrating the benefits (complementing data from multiple sources to strengthen/confirm evidence) and the underlying challenges (selecting search terms, data presentation) of exploiting heterogeneous information sources, thereby advocating the need for the proposed framework. This work contributes in establishing a continuous learning system for drug safety surveillance by exploiting heterogeneous publicly available data sources via appropriate support tools.

Enabling social listening for cardiac safety monitoring: Proceedings from a drug information association-cardiac safety research consortium cosponsored think tank.

PubMed

Seifert, Harry A; Malik, Raleigh E; Bhattacharya, Mondira; Campbell, Kevin R; Okun, Sally; Pierce, Carrie; Terkowitz, Jeffrey; Turner, J Rick; Krucoff, Mitchell W; Powell, Gregory E

2017-12-01

This white paper provides a summary of the presentations and discussions from a think tank on "Enabling Social Listening for Cardiac Safety Monitoring" trials that was cosponsored by the Drug Information Association and the Cardiac Safety Research Consortium, and held at the White Oak headquarters of the US Food and Drug Administration on June 3, 2016. The meeting's goals were to explore current methods of collecting and evaluating social listening data and to consider their applicability to cardiac safety surveillance. Social listening is defined as the act of monitoring public postings on the Internet. It has several theoretical advantages for drug and device safety. First, these include the ability to detect adverse events that are "missed" by traditional sources and the ability to detect adverse events sooner than would be allowed by traditional sources, both by affording near-real-time access to data from culturally and geographically diverse sources. Social listening can also potentially introduce a novel patient voice into the conversation about drug safety, which could uniquely augment understanding of real-world medication use obtained from more traditional methodologies. Finally, it can allow for access to information about drug misuse and diversion. To date, the latter 2 of these have been realized. Although regulators from the Food and Drug Administration and the United Kingdom's Medicines and Healthcare Products Regulatory Agency participated in the think tank along with representatives from industry, academia, and patient groups, this article should not be construed to constitute regulatory guidance. Copyright © 2017 Elsevier Inc. All rights reserved.

Keeping nurse researchers safe: workplace health and safety issues.

PubMed

Barr, Jennieffer; Welch, Anthony

2012-07-01

This article is a report of a qualitative study of workplace health and safety issues in nursing research. Researcher health and safety have become increasing concerns as there is an increased amount of research undertaken in the community and yet there is a lack of appropriate guidelines on how to keep researchers safe when undertaking fieldwork. This study employed a descriptive qualitative approach, using different sources of data to find any references to researcher health and safety issues. A simple descriptive approach to inquiry was used for this study. Three approaches to data collection were used: interviews with 15 researchers, audits of 18 ethics applications, and exploration of the literature between 1992 and 2010 for examples of researcher safety issues. Data analysis from the three approaches identified participant comments, narrative descriptions or statements focused on researcher health and safety. Nurse researchers' health and safety may be at risk when conducting research in the community. Particular concern involves conducting sensitive research where researchers are physically at risk of being harmed, or being exposed to the development of somatic symptoms. Nurse researchers may perceive the level of risk of harm as lower than the actual or potential harm present in research. Nurse researchers do not consistently implement risk assessment before and during research. Researcher health and safety should be carefully considered at all stages of the research process. Research focusing on sensitive data and vulnerable populations need to consider risk minimization through strategies such as appropriate researcher preparation, safety during data collection, and debriefing if required. © 2012 Blackwell Publishing Ltd.

Source to point of use drinking water changes and knowledge, attitude and practices in Katsina State, Northern Nigeria

NASA Astrophysics Data System (ADS)

Onabolu, B.; Jimoh, O. D.; Igboro, S. B.; Sridhar, M. K. C.; Onyilo, G.; Gege, A.; Ilya, R.

In many Sub-Saharan countries such as Nigeria, inadequate access to safe drinking water is a serious problem with 37% in the region and 58% of rural Nigeria using unimproved sources. The global challenge to measuring household water quality as a determinant of safety is further compounded in Nigeria by the possibility of deterioration from source to point of use. This is associated with the use of decentralised water supply systems in rural areas which are not fully reticulated to the household taps, creating a need for an integrated water quality monitoring system. As an initial step towards establishing the system in the north west and north central zones of Nigeria, The Katsina State Rural Water and Sanitation Agency, responsible for ensuring access to safe water and adequate sanitation to about 6 million people carried out a three pronged study with the support of UNICEF Nigeria. Part 1 was an assessment of the legislative and policy framework, institutional arrangements and capacity for drinking water quality monitoring through desk top reviews and Key Informant Interviews (KII) to ascertain the institutional capacity requirements for developing the water quality monitoring system. Part II was a water quality study in 700 households of 23 communities in four local government areas. The objectives were to assess the safety of drinking water, compare the safety at source and household level and assess the possible contributory role of end users’ Knowledge Attitudes and Practices. These were achieved through water analysis, household water quality tracking, KII and questionnaires. Part III was the production of a visual documentary as an advocacy tool to increase awareness of the policy makers of the linkages between source management, treatment and end user water quality. The results indicate that except for pH, conductivity and manganese, the improved water sources were safe at source. However there was a deterioration in water quality between source and point of use in 18%, 12.5%, 27% and 50% of hand pump fitted boreholes, motorised boreholes, hand dug wells and streams respectively. Although no statistical correlation could be drawn between water management practices and water quality deterioration, the survey of the study households gave an indication of the possible contributory role of their knowledge, attitudes and practices to water contamination after provision. Some of the potential water related sources of contamination were poor source protection and location, use of unimproved water source and poor knowledge and practice of household water treatment methods, poor hand washing practices in terms of percentage that wash hands and use soap. Consequently 34 WASH departments have been created at the local government level towards establishment of a community based monitoring system and piloting has begun in Kaita local government area.

Vehicle familiarity and safety

DOT National Transportation Integrated Search

1983-07-01

A literature review and accident data analyses were conducted to examine the : relationship between vehicle familiarity and safety. The infonmation from these : diverse sources was consistent in suggesting that drivers of passenger cars and . : motor...

Revenue sources for financing transportation safety activities in Virginia : phase three, feasibility of a surcharge on traffic fines.

DOT National Transportation Integrated Search

1981-01-01

Senate Bill 85, an action of the 1978 General Assembly, amended the Code of Virginia to provide, in part, that the Division of Highway Safety be succeeded by the newly created Department of Transportation Safety effective July 1, 1978. In its Declara...

76 FR 4420 - OSRAM SYLVANIA Products, Inc., Receipt of Petition for Decision of Inconsequential Noncompliance

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

... basis that this noncompliance is inconsequential to motor vehicle safety. This notice of receipt of... petition OSRAM SYLVANIA argues that the noncompliance is inconsequential to motor vehicle safety for the... conforming to all applicable Federal motor vehicle safety standards. Subject ``H11 C'' light sources are...

14 CFR 417.113 - Launch safety rules.

Code of Federal Regulations, 2010 CFR

2010-01-01

... flight safety analysis of subpart C of this part. These must include criteria for: (i) Surveillance of... criteria for ensuring that: (i) The flight safety system is operating to ensure the launch vehicle will... source at all times from lift-off to orbit insertion for an orbital launch, to the end of powered flight...

14 CFR 417.113 - Launch safety rules.

Code of Federal Regulations, 2014 CFR

2014-01-01

... flight safety analysis of subpart C of this part. These must include criteria for: (i) Surveillance of... criteria for ensuring that: (i) The flight safety system is operating to ensure the launch vehicle will... source at all times from lift-off to orbit insertion for an orbital launch, to the end of powered flight...

14 CFR 417.113 - Launch safety rules.

Code of Federal Regulations, 2011 CFR

2011-01-01

... flight safety analysis of subpart C of this part. These must include criteria for: (i) Surveillance of... criteria for ensuring that: (i) The flight safety system is operating to ensure the launch vehicle will... source at all times from lift-off to orbit insertion for an orbital launch, to the end of powered flight...

14 CFR 417.113 - Launch safety rules.

Code of Federal Regulations, 2013 CFR

2013-01-01

... flight safety analysis of subpart C of this part. These must include criteria for: (i) Surveillance of... criteria for ensuring that: (i) The flight safety system is operating to ensure the launch vehicle will... source at all times from lift-off to orbit insertion for an orbital launch, to the end of powered flight...

14 CFR 417.113 - Launch safety rules.

Code of Federal Regulations, 2012 CFR

2012-01-01

... flight safety analysis of subpart C of this part. These must include criteria for: (i) Surveillance of... criteria for ensuring that: (i) The flight safety system is operating to ensure the launch vehicle will... source at all times from lift-off to orbit insertion for an orbital launch, to the end of powered flight...

Aviation Trends Related to Atmospheric Environment Safety Technologies Project Technical Challenges

NASA Technical Reports Server (NTRS)

Reveley, Mary S.; Withrow, Colleen A.; Barr, Lawrence C.; Evans, Joni K.; Leone, Karen M.; Jones, Sharon M.

2014-01-01

Current and future aviation safety trends related to the National Aeronautics and Space Administration's Atmospheric Environment Safety Technologies Project's three technical challenges (engine icing characterization and simulation capability; airframe icing simulation and engineering tool capability; and atmospheric hazard sensing and mitigation technology capability) were assessed by examining the National Transportation Safety Board (NTSB) accident database (1989 to 2008), incidents from the Federal Aviation Administration (FAA) accident/incident database (1989 to 2006), and literature from various industry and government sources. The accident and incident data were examined for events involving fixed-wing airplanes operating under Federal Aviation Regulation (FAR) Parts 121, 135, and 91 for atmospheric conditions related to airframe icing, ice-crystal engine icing, turbulence, clear air turbulence, wake vortex, lightning, and low visibility (fog, low ceiling, clouds, precipitation, and low lighting). Five future aviation safety risk areas associated with the three AEST technical challenges were identified after an exhaustive survey of a variety of sources and include: approach and landing accident reduction, icing/ice detection, loss of control in flight, super density operations, and runway safety.

Status of intense permanent magnet proton source for China-accelerator driven sub-critical system Linac.

PubMed

Wu, Q; Ma, H Y; Yang, Y; Sun, L T; Zhang, X Z; Zhang, Z M; Zhao, H Y; He, Y; Zhao, H W

2016-02-01

Two compact intense 2.45 GHz permanent magnet proton sources and their corresponding low energy beam transport (LEBT) system were developed successfully for China accelerator driven sub-critical system in 2014. Both the proton sources operate at 35 kV potential. The beams extracted from the ion source are transported by the LEBT, which is composed of two identical solenoids, to the 2.1 MeV Radio-Frequency Quadrupole (RFQ). In order to ensure the safety of the superconducting cavities during commissioning, an electrostatic-chopper has been designed and installed in the LEBT line that can chop the continuous wave beam into a pulsed one. The minimum width of the pulse is less than 10 μs and the fall/rise time of the chopper is about 20 ns. The performance of the proton source and the LEBT, such as beam current, beam profile, emittance and the impact to RFQ injection will be presented.

Status of intense permanent magnet proton source for China-accelerator driven sub-critical system Linac

NASA Astrophysics Data System (ADS)

Wu, Q.; Ma, H. Y.; Yang, Y.; Sun, L. T.; Zhang, X. Z.; Zhang, Z. M.; Zhao, H. Y.; He, Y.; Zhao, H. W.

2016-02-01

Two compact intense 2.45 GHz permanent magnet proton sources and their corresponding low energy beam transport (LEBT) system were developed successfully for China accelerator driven sub-critical system in 2014. Both the proton sources operate at 35 kV potential. The beams extracted from the ion source are transported by the LEBT, which is composed of two identical solenoids, to the 2.1 MeV Radio-Frequency Quadrupole (RFQ). In order to ensure the safety of the superconducting cavities during commissioning, an electrostatic-chopper has been designed and installed in the LEBT line that can chop the continuous wave beam into a pulsed one. The minimum width of the pulse is less than 10 μs and the fall/rise time of the chopper is about 20 ns. The performance of the proton source and the LEBT, such as beam current, beam profile, emittance and the impact to RFQ injection will be presented.

Healthcare professionals' self-reported experiences and preferences related to direct healthcare professional communications: a survey conducted in the Netherlands.

PubMed

Piening, Sigrid; Haaijer-Ruskamp, Flora M; de Graeff, Pieter A; Straus, Sabine M J M; Mol, Peter G M

2012-11-01

In Europe, Direct Healthcare Professional Communications (DHPCs) are important tools to inform healthcare professionals of serious, new drug safety issues. However, this tool has not always been successful in effectively communicating the desired actions to healthcare professionals. The aim of this study was to explore healthcare providers' experiences and their preferences for improvement of risk communication, comparing views of general practitioners (GPs), internists, community pharmacists and hospital pharmacists. A questionnaire was developed and pilot tested to assess experiences and preferences of Dutch healthcare professionals with DHPCs. The questionnaire and two reminders were sent to a random sample of 3488 GPs, internists and community and hospital pharmacists in the Netherlands. Descriptive statistics were used to describe demographic characteristics of the respondents. Chi squares, ANOVAs and the Wilcoxon signed rank test were used, when appropriate, to compare healthcare professional groups. The overall response rate was 34% (N = 1141, ranging from 24% for internists to 46% for community pharmacists). Healthcare providers trusted safety information more when provided by the Dutch Medicines Evaluation Board (MEB) than by the pharmaceutical industry. This was more the case for GPs than for the other healthcare professionals. Respondents preferred safety information to be issued by the MEB, the Dutch Pharmacovigilance Center or their own professional associations. The preferred alternative channels of drug safety information were e-mail, medical journals and electronic prescribing systems. Safety information of drugs does not always reach healthcare professionals through DHPCs. To improve current risk communication of drug safety issues, alternative and/or additional methods of risk communication should be developed using electronic methods and medical journals. Moreover, (additional) risk communication coming from an independent source such as the MEB should be considered. Special effort is needed to reach GPs.

NSRD-10: Leak Path Factor Guidance Using MELCOR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Louie, David; Humphries, Larry L.

Estimates of the source term from a U.S. Department of Energy (DOE) nuclear facility requires that the analysts know how to apply the simulation tools used, such as the MELCOR code, particularly for a complicated facility that may include an air ventilation system and other active systems that can influence the environmental pathway of the materials released. DOE has designated MELCOR 1.8.5, an unsupported version, as a DOE ToolBox code in its Central Registry, which includes a leak-path-factor guidance report written in 2004 that did not include experimental validation data. To continue to use this MELCOR version requires additional verificationmore » and validations, which may not be feasible from a project cost standpoint. Instead, the recent MELCOR should be used. Without any developer support and lack of experimental data validation, it is difficult to convince regulators that the calculated source term from the DOE facility is accurate and defensible. This research replaces the obsolete version in the 2004 DOE leak path factor guidance report by using MELCOR 2.1 (the latest version of MELCOR with continuing modeling development and user support) and by including applicable experimental data from the reactor safety arena and from applicable experimental data used in the DOE-HDBK-3010. This research provides best practice values used in MELCOR 2.1 specifically for the leak path determination. With these enhancements, the revised leak-path-guidance report should provide confidence to the DOE safety analyst who would be using MELCOR as a source-term determination tool for mitigated accident evaluations.« less

Patient Reporting of Safety experiences in Organisational Care Transfers (PRoSOCT): a feasibility study of a patient reporting tool as a proactive approach to identifying latent conditions within healthcare systems

PubMed Central

Scott, Jason; Waring, Justin; Heavey, Emily; Dawson, Pamela

2014-01-01

Background It is increasingly recognised that patients can play a role in reporting safety incidents. Studies have tended to focus on patients within hospital settings, and on the reporting of patient safety incidents as defined within a medical model of safety. This study aims to determine the feasibility of collecting and using patient experiences of safety as a proactive approach to identifying latent conditions of safety as patients undergo organisational care transfers. Methods and analysis The study comprises three components: (1) patients’ experiences of safety relating to a care transfer, (2) patients’ receptiveness to reporting experiences of safety, (3) quality improvement using patient experiences of safety. (1) A safety survey and evaluation form will be distributed to patients discharged from 15 wards across four clinical areas (cardiac, care of older people, orthopaedics and stroke) over 1 year. Healthcare professionals involved in the care transfer will be provided with a regular summary of patient feedback. (2) Patients (n=36) who return an evaluation form will be sampled representatively based on the four clinical areas and interviewed about their experiences of healthcare and safety and completing the survey. (3) Healthcare professionals (n=75) will be invited to participate in semistructured interviews and focus groups to discuss their experiences with and perceptions of receiving and using patient feedback. Data analysis will explore the relationship between patient experiences of safety and other indicators and measures of quality and safety. Interview and focus group data will be thematically analysed and triangulated with all other data sources using a convergence coding matrix. Ethics and dissemination The study has been granted National Health Service (NHS) Research Ethics Committee approval. Patient experiences of safety will be disseminated to healthcare teams for the purpose of organisational development and quality improvement. Results will be disseminated to study participants as well as through peer-reviewed outputs. PMID:24833698

Safety outcomes in the United States: trends and challenges in measurement.

PubMed

Greenberg, Michael D; Haviland, Amelia M; Yu, Hao; Farley, Donna O

2009-04-01

To prepare Agency for Healthcare Research and Quality (AHRQ) for monitoring the impact of its own patient safety initiative, by exploring available outcomes data, assessing usability of measures, and estimating national trends in patient outcomes. Annual summary data on incidence of Joint Commission Sentinel Events, MEDMARX medication error events, and MDS measures of falls and pressure ulcers in nursing home residents. HCUP National Inpatient Sample (NIS) administrative claims data. Description and assessment of published summary data on selected safety measures. Analysis of selected Patient Safety Indicators (PSIs) and Utah–Missouri adverse event measures using HCUP NIS claims data (1994–2003). Interpretation of safety outcome trends requires close attention to the characteristics of underlying data sources and measures. Encounter-based measures have been affected by changes in definitions and ICD-9 coding, as well as by changes in the structure of administrative datasets like HCUP NIS. Historical trends are mixed for the safety outcome measures reviewed, with some measures showing improvement, others deterioration, and still others remaining fairly stable. Constructing national trends of safety outcomes is difficult because of limitations in available data sources and measures. Tracking growth in the adoption of safe practices could offer an important strategy for complementing existing safety measurement capabilities.

Access to primary energy sources - the basis of national energy security

NASA Astrophysics Data System (ADS)

Szlązak, Jan; Szlązak, Rafał A.

2017-11-01

National energy security is of fundamental importance for economic development of a country. To ensure such safety energy raw material, also called primary energy sources, are necessary. Currently in Poland primary energy sources include mainly fossil fuels, such as hard coal, brown coal, natural gas and crude oil. Other sources, e.g. renewable energy sources account for c. 15% in the energy mix. Primary energy sources are used to produce mainly electricity, which is considered as the cleanest form of energy. Poland does not have, unfortunately, sufficient energy sources and is forced to import some of them, mainly natural gas and crude oil. The article presents an insightful analysis of energy raw material reserves possessed by Poland and their structure taking account of the requirements applicable in the European Union, in particular, those related to environmental protection. The article also describes demand for electricity now and in the perspective of 2030. Primary energy sources necessary for its production have also been given. The article also includes the possibilities for the use of renewable energy sources in Poland, however, climatic conditions there are not are not particularly favourable to it. All the issues addressed in the article are summed up and ended with conclusions.

Superluminescent light emitting diodes: the best out of two worlds

NASA Astrophysics Data System (ADS)

Rossetti, M.; Napierala, J.; Matuschek, N.; Achatz, U.; Duelk, M.; Vélez, C.; Castiglia, A.; Grandjean, N.; Dorsaz, J.; Feltin, E.

2012-03-01

Since pico-projectors were starting to become the next electronic "must-have" gadget, the experts were discussing which light-source technology seems to be the best for the existing three major projection approaches for the optical scanning module such as digital light processing, liquid crystal on silica and laser beam steering. Both so-far used light source technologies have distinct advantages and disadvantages. Though laser-based pico-projectors are focus-free and deliver a wider color gamut, their major disadvantages are speckle noise, cost and safety issues. In contrast, projectors based on cheaper Light Emitting Diodes (LEDs) as light source are criticized for a lack of brightness and for having limited focus. Superluminescent Light Emitting Diodes (SLEDs) are temporally incoherent and spatially coherent light sources merging in one technology the advantages of both Laser Diodes (LDs) and LEDs. With almost no visible speckle noise, focus-free operation and potentially the same color gamut than LDs, SLEDs could potentially answer the question which light source to use in future projector applications. In this quest for the best light source, we realized visible SLEDs emitting both in the red and blue spectral region. While the technology required for the realization of red emitters is already well established, III-nitride compounds required for blue emission have experienced a major development only in relatively recent times and the technology is still under development. The present paper is a review of the status of development reached for the blue superluminescent diodes based on the GaN material system.

Predicting Drug Safety and Communicating Risk: Benefits of a Bayesian Approach.

PubMed

Lazic, Stanley E; Edmunds, Nicholas; Pollard, Christopher E

2018-03-01

Drug toxicity is a major source of attrition in drug discovery and development. Pharmaceutical companies routinely use preclinical data to predict clinical outcomes and continue to invest in new assays to improve predictions. However, there are many open questions about how to make the best use of available data, combine diverse data, quantify risk, and communicate risk and uncertainty to enable good decisions. The costs of suboptimal decisions are clear: resources are wasted and patients may be put at risk. We argue that Bayesian methods provide answers to all of these problems and use hERG-mediated QT prolongation as a case study. Benefits of Bayesian machine learning models include intuitive probabilistic statements of risk that incorporate all sources of uncertainty, the option to include diverse data and external information, and visualizations that have a clear link between the output from a statistical model and what this means for risk. Furthermore, Bayesian methods are easy to use with modern software, making their adoption for safety screening straightforward. We include R and Python code to encourage the adoption of these methods.

Noise abatement and traffic safety: The trade-off of quieter engines and pavements on vehicle detection.

PubMed

Mendonça, C; Freitas, E; Ferreira, J P; Raimundo, I D; Santos, J A

2013-03-01

Road traffic sounds are a major source of noise pollution in urban areas. But recent developments such as low noise pavements and hybrid/electric engine vehicles cast an optimistic outlook over such an environmental problem. However, it can be argued that engine, tire, and road noise could be relevant sources of information to avoid road traffic conflicts and accidents. In this paper, we analyze the potential trade-offs of traffic-noise abatement approaches in an experimental study, focusing for the first time on the impact and interaction of relevant factors such as pavement type, vehicle type, listener's age, and background noise, on vehicle detection levels. Results reveal that vehicle and pavement type significantly affect vehicle detection. Age is a significant factor, as both younger and older people exhibit lower detection levels of incoming vehicles. Low noise pavements combined with all-electric and hybrid vehicles might pose a severe threat to the safety of vulnerable road users. All factors interact simultaneously, and vehicle detection is best predicted by the loudness signal-to-noise ratio. Copyright © 2012 Elsevier Ltd. All rights reserved.

Establishment of Groundwater Arsenic Potential Distribution and Discrimination in Taiwan

NASA Astrophysics Data System (ADS)

Tsai, Kuo Sheng; Chen, Yu Ying; Chung Liu, Chih; Lin, Chien Wen

2016-04-01

According to the last 10 years groundwater monitoring data in Taiwan, Arsenic concentration increase rapidly in some areas, similar to Bengal and India, the main source of Arsenic-polluted groundwater is geological sediments, through reducing reactions. There are many researches indicate that high concentration of Arsenic in groundwater poses the risk to water safety, for example, the farm lands irrigation water contains Arsenic cause the concentration of Arsenic increase in soil and crops. Based on the management of water usage instead of remediation in the situation of insufficient water. Taiwan EPA has been developed the procedures of Arsenic contamination potential area establishment and source discriminated process. Taiwan EPA use the procedures to determine the management of using groundwater, and the proposing usage of Arsenic groundwater accordance with different objects. Agencies could cooperate with the water quality standard or water needs, studying appropriate water purification methods and the groundwater depth, water consumption, thus achieve the goal of water safety and environmental protection, as a reference of policy to control total Arsenic concentration in groundwater. Keywords: Arsenic; Distribution; Discrimination; Pollution potential area of Arsenic; Origin evaluation of groundwater Arsenic

Status and problems of fusion reactor development.

PubMed

Schumacher, U

2001-03-01

Thermonuclear fusion of deuterium and tritium constitutes an enormous potential for a safe, environmentally compatible and sustainable energy supply. The fuel source is practically inexhaustible. Further, the safety prospects of a fusion reactor are quite favourable due to the inherently self-limiting fusion process, the limited radiologic toxicity and the passive cooling property. Among a small number of approaches, the concept of toroidal magnetic confinement of fusion plasmas has achieved most impressive scientific and technical progress towards energy release by thermonuclear burn of deuterium-tritium fuels. The status of thermonuclear fusion research activity world-wide is reviewed and present solutions to the complicated physical and technological problems are presented. These problems comprise plasma heating, confinement and exhaust of energy and particles, plasma stability, alpha particle heating, fusion reactor materials, reactor safety and environmental compatibility. The results and the high scientific level of this international research activity provide a sound basis for the realisation of the International Thermonuclear Experimental Reactor (ITER), whose goal is to demonstrate the scientific and technological feasibility of a fusion energy source for peaceful purposes.

10 CFR 39.53 - Energy compensation source.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Energy compensation source. 39.53 Section 39.53 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Equipment § 39.53 Energy compensation source. The licensee may use an energy compensation source (ECS) which is...

10 CFR 39.53 - Energy compensation source.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Energy compensation source. 39.53 Section 39.53 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Equipment § 39.53 Energy compensation source. The licensee may use an energy compensation source (ECS) which is...

10 CFR 39.53 - Energy compensation source.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Energy compensation source. 39.53 Section 39.53 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Equipment § 39.53 Energy compensation source. The licensee may use an energy compensation source (ECS) which is...

10 CFR 39.53 - Energy compensation source.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Energy compensation source. 39.53 Section 39.53 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Equipment § 39.53 Energy compensation source. The licensee may use an energy compensation source (ECS) which is...

10 CFR 39.53 - Energy compensation source.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Energy compensation source. 39.53 Section 39.53 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Equipment § 39.53 Energy compensation source. The licensee may use an energy compensation source (ECS) which is...

Validation of a RP-HPLC-DAD Method for Chamomile (Matricaria recutita) Preparations and Assessment of the Marker, Apigenin-7-glucoside, Safety and Anti-Inflammatory Effect

PubMed Central

Miguel, Felipe Galeti; Spinola, Nathália Favaretto; Ribeiro, Diego Luis; Barcelos, Gustavo Rafael Mazzaron; Antunes, Lusânia Maria Greggi; Hori, Juliana Issa; Marquele-Oliveira, Franciane; Rocha, Bruno Alves; Berretta, Andresa Aparecida

2015-01-01

Chamomile is a medicinal plant, which presents several biological effects, especially the anti-inflammatory effect. One of the compounds related to this effect is apigenin, a flavonoid that is mostly found in its glycosylated form, apigenin-7-glucoside (APG), in natural sources. However, the affectivity and safety of this glycoside have not been well explored for topical application. In this context, the aim of this work was to develop and validate a reversed-phase high-performance liquid chromatography (RP-HPLC-DAD) method to quantify APG in chamomile preparations. Additionally, the safety and the anti-inflammatory potential of this flavonoid were verified. The RP-HPLC-DAD method was developed and validated with linearity at 24.0–36.0 μg/mL range (r = 0.9994). Intra- and interday precision (RSD) were 0.27–2.66% and accuracy was 98.27–101.21%. The validated method was applied in the analysis of chamomile flower heads, glycolic extract, and Kamillen cream, supporting the method application in the quality control of chamomile preparations. Furthermore, the APG safety was assessed by MTT cytotoxicity assay and mutagenic protocols and the anti-inflammatory activity was confirmed by a diminished TNF-α production showed by mice macrophages treated with APG following LPS treatment. PMID:26421053

Kaiser Permanente implant registries benefit patient safety, quality improvement, cost-effectiveness.

PubMed

Paxton, Elizabeth W; Kiley, Mary-Lou; Love, Rebecca; Barber, Thomas C; Funahashi, Tadashi T; Inacio, Maria C S

2013-06-01

In response to the increased volume, risk, and cost of medical devices, in 2001 Kaiser Permanente (KP) developed implant registries to enhance patient safety and quality, and to evaluate cost-effectiveness. Using an integrated electronic health record system, administrative databases, and other institutional databases, orthopedic, cardiology, and vascular implant registries were developed in 2001, 2006, and 2011, respectively. These registries monitor patients, implants, clinical practices, and surgical outcomes for KP's 9 million members. Critical to registry success is surgeon leadership and engagement; each geographical region has a surgeon champion who provides feedback on registry initiatives and disseminates registry findings. The registries enhance patient safety by providing a variety of clinical decision tools such as risk calculators, quality reports, risk-adjusted medical center reports, summaries of surgeon data, and infection control reports to registry stakeholders. The registries are used to immediately identify patients with recalled devices, evaluate new and established device technology, and identify outlier implants. The registries contribute to cost-effectiveness initiatives through collaboration with sourcing and contracting groups and confirming adherence to device formulary guidelines. Research studies based on registry data have directly influenced clinical best practices. Registries are important tools to evaluate longitudinal device performance and safety, study the clinical indications for and outcomes of device implantation, respond promptly to recalls and advisories, and contribute to the overall high quality of care of our patients.

MELCOR/CONTAIN LMR Implementation Report. FY14 Progress

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humphries, Larry L; Louie, David L.Y.

2014-10-01

This report describes the preliminary implementation of the sodium thermophysical properties and the design documentation for the sodium models of CONTAIN-LMR to be implemented into MELCOR 2.1. In the past year, the implementation included two separate sodium properties from two different sources. The first source is based on the previous work done by Idaho National Laboratory by modifying MELCOR to include liquid lithium equation of state as a working fluid to model the nuclear fusion safety research. To minimize the impact to MELCOR, the implementation of the fusion safety database (FSD) was done by utilizing the detection of the datamore » input file as a way to invoking the FSD. The FSD methodology has been adapted currently for this work, but it may subject modification as the project continues. The second source uses properties generated for the SIMMER code. Preliminary testing and results from this implementation of sodium properties are given. In this year, the design document for the CONTAIN-LMR sodium models, such as the two condensable option, sodium spray fire, and sodium pool fire is being developed. This design document is intended to serve as a guide for the MELCOR implementation. In addition, CONTAIN-LMR code used was based on the earlier version of CONTAIN code. Many physical models that were developed since this early version of CONTAIN may not be captured by the code. Although CONTAIN 2, which represents the latest development of CONTAIN, contains some sodium specific models, which are not complete, the utilizing CONTAIN 2 with all sodium models implemented from CONTAIN-LMR as a comparison code for MELCOR should be done. This implementation should be completed in early next year, while sodium models from CONTAIN-LMR are being integrated into MELCOR. For testing, CONTAIN decks have been developed for verification and validation use.« less

Fuzzy Bayesian Network-Bow-Tie Analysis of Gas Leakage during Biomass Gasification

PubMed Central

Yan, Fang; Xu, Kaili; Yao, Xiwen; Li, Yang

2016-01-01

Biomass gasification technology has been rapidly developed recently. But fire and poisoning accidents caused by gas leakage restrict the development and promotion of biomass gasification. Therefore, probabilistic safety assessment (PSA) is necessary for biomass gasification system. Subsequently, Bayesian network-bow-tie (BN-bow-tie) analysis was proposed by mapping bow-tie analysis into Bayesian network (BN). Causes of gas leakage and the accidents triggered by gas leakage can be obtained by bow-tie analysis, and BN was used to confirm the critical nodes of accidents by introducing corresponding three importance measures. Meanwhile, certain occurrence probability of failure was needed in PSA. In view of the insufficient failure data of biomass gasification, the occurrence probability of failure which cannot be obtained from standard reliability data sources was confirmed by fuzzy methods based on expert judgment. An improved approach considered expert weighting to aggregate fuzzy numbers included triangular and trapezoidal numbers was proposed, and the occurrence probability of failure was obtained. Finally, safety measures were indicated based on the obtained critical nodes. The theoretical occurrence probabilities in one year of gas leakage and the accidents caused by it were reduced to 1/10.3 of the original values by these safety measures. PMID:27463975

Phynx: an open source software solution supporting data management and web-based patient-level data review for drug safety studies in the general practice research database and other health care databases.

PubMed

Egbring, Marco; Kullak-Ublick, Gerd A; Russmann, Stefan

2010-01-01

To develop a software solution that supports management and clinical review of patient data from electronic medical records databases or claims databases for pharmacoepidemiological drug safety studies. We used open source software to build a data management system and an internet application with a Flex client on a Java application server with a MySQL database backend. The application is hosted on Amazon Elastic Compute Cloud. This solution named Phynx supports data management, Web-based display of electronic patient information, and interactive review of patient-level information in the individual clinical context. This system was applied to a dataset from the UK General Practice Research Database (GPRD). Our solution can be setup and customized with limited programming resources, and there is almost no extra cost for software. Access times are short, the displayed information is structured in chronological order and visually attractive, and selected information such as drug exposure can be blinded. External experts can review patient profiles and save evaluations and comments via a common Web browser. Phynx provides a flexible and economical solution for patient-level review of electronic medical information from databases considering the individual clinical context. It can therefore make an important contribution to an efficient validation of outcome assessment in drug safety database studies.

Food Safety Crisis Management-A Comparison between Germany and the Netherlands.

PubMed

van Asselt, E D; van der Fels-Klerx, H J; Breuer, O; Helsloot, I

2017-02-01

In order to prevent food safety incidents from becoming a crisis, a good crisis management structure is essential. The aim of the current study was to compare and evaluate the national food incident response plans of 2 neighboring EU Member States: Germany and the Netherlands. This revealed that the structure of these plans is comparable, starting with initial alerting, assessment of the problem, upscaling, an execution phase and finally an evaluation of the crisis management. However, the German communication structure is more complex than the Dutch one and cross-border communication between both countries is currently limited. In general, the presence of national response plans does not guarantee a good and swift response to a food safety incident as this is often hampered by difficulties in tracing the source of the problem as well as difficulties in communication between organizations involved in crisis management. A timely detection can be improved through the development of fast screening and detecting systems and through combining various data sources using computer software systems. Mutual cooperation and communication can be improved through joint exercises or projects. This will help to streamline communication toward consumers and trade partners. Such communication should be transparent relaying not only the facts but also the uncertainties in a crisis in order to gain consumer trust and safeguard international trade. © 2017 Institute of Food Technologists®.

29 CFR 1926.702 - Requirements for equipment and tools.

Code of Federal Regulations, 2012 CFR

2012-07-01

... equipped with hydraulic or pneumatic gates shall have positive safety latches or similar safety devices... cause injury, unless all potentially hazardous energy sources have been locked out and tagged. (2) Tags...

29 CFR 1926.702 - Requirements for equipment and tools.

Code of Federal Regulations, 2011 CFR

2011-07-01

... equipped with hydraulic or pneumatic gates shall have positive safety latches or similar safety devices... cause injury, unless all potentially hazardous energy sources have been locked out and tagged. (2) Tags...

29 CFR 1926.702 - Requirements for equipment and tools.

Code of Federal Regulations, 2013 CFR

2013-07-01

... equipped with hydraulic or pneumatic gates shall have positive safety latches or similar safety devices... cause injury, unless all potentially hazardous energy sources have been locked out and tagged. (2) Tags...

29 CFR 1926.702 - Requirements for equipment and tools.

Code of Federal Regulations, 2014 CFR

2014-07-01

... equipped with hydraulic or pneumatic gates shall have positive safety latches or similar safety devices... cause injury, unless all potentially hazardous energy sources have been locked out and tagged. (2) Tags...

Safety for Older Consumers: Home Safety Checklist

MedlinePlus

... 3 Keep ashtrays, smoking materi- als, candles, hot plates and other potential fire sources away from curtains, ... A ll electrical outlets and switches have cover plates installed so no wiring is exposed. U nused ...

Where Do Agricultural Producers Get Safety and Health Information?

PubMed

Chiu, Sophia; Cheyney, Marsha; Ramirez, Marizen; Gerr, Fred

2015-01-01

There is little empirical guidance regarding communication sources and channels used and trusted by agricultural producers. The goal of this study was to characterize frequency of use and levels of trust in agricultural safety and health information sources and channels accessed by agricultural producers. A sample of 195 agricultural producers was surveyed at county fairs in Iowa. Information was collected about the frequency of use and level of trust in 14 information sources and channels. Associations between age, gender, and education level and use and trust of each information source or channel were estimated using logistic regression. The sample consisted of 72% men with a mean age of 50.1 (SD = 15.6) years. Newspaper and magazine articles were the most commonly used agricultural safety and health information source or channel; 77% (n = 140) of respondents reporting using them at least monthly. Among those reporting monthly or more frequent use, 75% reported trusting mostly or completely, compared with 58% using and 49% trusting the Internet. High levels of use and trust of newspaper and magazine articles did not vary significantly by age, gender, or education level. Age in the highest tertile (57-83 years) was marginally associated with lower odds of using, as well as using and trusting, all the information sources and channels studied except for medical clinics (use only: odds ratio [OR], 3.51, 95% confidence interval [CI], 0.79-15.64; use and trust: OR, 5.90, 95% CI, 0.91-38.42). These findings suggest that traditional media may be more effective than digital media for delivering agricultural safety and health information to agricultural producers. Medical clinics may be an untapped venue for communicating with older agricultural producers.

Optical fibre sensors for the monitoring of a microwave plasma UV lamp and ozone generation system

NASA Astrophysics Data System (ADS)

O'Keeffe, S.; Ortoneda, M.; Cullen, J. D.; Shaw, A.; Fitzpatrick, C.; Lewis, E.; Phipps, D. A.; Al-Shamma'a, A. I.

2008-09-01

The food industry is keen to have new techniques that improve the safety and shelf life of food products without the use of preservatives. The use of UV light and ozone (O3) gas are becoming increasingly popular as methods to decontaminate food and thus extending its shelf life. A microwave radiation device that is a novel source of both germicidal UV and O3 suitable for the food industry has been developed, which offers speed, cost and energy benefits over existing sources. With this system comes the need to monitor a number of conditions, primarily UV intensity and ozone gas concentrations. An optical fibre sensor system is being developed to analyse these properties, in order to control and optimise the outputs of the microwave plasma UV lamp.

Manned space flight nuclear system safety. Volume 1: base nuclear system safety

NASA Technical Reports Server (NTRS)

1972-01-01

The mission and terrestrial nuclear safety aspects of future long duration manned space missions in low earth orbit are discussed. Nuclear hazards of a typical low earth orbit Space Base mission (from natural sources and on-board nuclear hardware) have been identified and evaluated. Some of the principal nuclear safety design and procedural considerations involved in launch, orbital, and end of mission operations are presented. Areas of investigation include radiation interactions with the crew, subsystems, facilities, experiments, film, interfacing vehicles, nuclear hardware and the terrestrial populace. Results of the analysis indicate: (1) the natural space environment can be the dominant radiation source in a low earth orbit where reactors are effectively shielded, (2) with implementation of safety guidelines the reactor can present a low risk to the crew, support personnel, the terrestrial populace, flight hardware and the mission, (3) ten year missions are feasible without exceeding integrated radiation limits assigned to flight hardware, and (4) crew stay-times up to one year are feasible without storm shelter provisions.

What Happened, and Why: Toward an Understanding of Human Error Based on Automated Analyses of Incident Reports. Volume 1

NASA Technical Reports Server (NTRS)

Maille, Nicolas P.; Statler, Irving C.; Ferryman, Thomas A.; Rosenthal, Loren; Shafto, Michael G.; Statler, Irving C.

2006-01-01

The objective of the Aviation System Monitoring and Modeling (ASMM) project of NASA s Aviation Safety and Security Program was to develop technologies that will enable proactive management of safety risk, which entails identifying the precursor events and conditions that foreshadow most accidents. This presents a particular challenge in the aviation system where people are key components and human error is frequently cited as a major contributing factor or cause of incidents and accidents. In the aviation "world", information about what happened can be extracted from quantitative data sources, but the experiential account of the incident reporter is the best available source of information about why an incident happened. This report describes a conceptual model and an approach to automated analyses of textual data sources for the subjective perspective of the reporter of the incident to aid in understanding why an incident occurred. It explores a first-generation process for routinely searching large databases of textual reports of aviation incident or accidents, and reliably analyzing them for causal factors of human behavior (the why of an incident). We have defined a generic structure of information that is postulated to be a sound basis for defining similarities between aviation incidents. Based on this structure, we have introduced the simplifying structure, which we call the Scenario as a pragmatic guide for identifying similarities of what happened based on the objective parameters that define the Context and the Outcome of a Scenario. We believe that it will be possible to design an automated analysis process guided by the structure of the Scenario that will aid aviation-safety experts to understand the systemic issues that are conducive to human error.

49 CFR 193.2613 - Auxiliary power sources.

Code of Federal Regulations, 2011 CFR

2011-10-01

... test must take into account the power needed to start up and simultaneously operate equipment that... 49 Transportation 3 2011-10-01 2011-10-01 false Auxiliary power sources. 193.2613 Section 193.2613...: FEDERAL SAFETY STANDARDS Maintenance § 193.2613 Auxiliary power sources. Each auxiliary power source must...

Cryptographically supported NFC tags in medication for better inpatient safety.

PubMed

Özcanhan, Mehmet Hilal; Dalkılıç, Gökhan; Utku, Semih

2014-08-01

Reliable sources report that errors in drug administration are increasing the number of harmed or killed inpatients, during healthcare. This development is in contradiction to patient safety norms. A correctly designed hospital-wide ubiquitous system, using advanced inpatient identification and matching techniques, should provide correct medicine and dosage at the right time. Researchers are still making grouping proof protocol proposals based on the EPC Global Class 1 Generation 2 ver. 1.2 standard tags, for drug administration. Analyses show that such protocols make medication unsecure and hence fail to guarantee inpatient safety. Thus, the original goal of patient safety still remains. In this paper, a very recent proposal (EKATE) upgraded by a cryptographic function is shown to fall short of expectations. Then, an alternative proposal IMS-NFC which uses a more suitable and newer technology; namely Near Field Communication (NFC), is described. The proposed protocol has the additional support of stronger security primitives and it is compliant to ISO communication and security standards. Unlike previous works, the proposal is a complete ubiquitous system that guarantees full patient safety; and it is based on off-the-shelf, new technology products available in every corner of the world. To prove the claims the performance, cost, security and scope of IMS-NFC are compared with previous proposals. Evaluation shows that the proposed system has stronger security, increased patient safety and equal efficiency, at little extra cost.

The Kaiser Permanente implant registries: effect on patient safety, quality improvement, cost effectiveness, and research opportunities.

PubMed

Paxton, Elizabeth W; Inacio, Maria Cs; Kiley, Mary-Lou

2012-01-01

Considering the high cost, volume, and patient safety issues associated with medical devices, monitoring of medical device performance is critical to ensure patient safety and quality of care. The purpose of this article is to describe the Kaiser Permanente (KP) implant registries and to highlight the benefits of these implant registries on patient safety, quality, cost effectiveness, and research. Eight KP implant registries leverage the integrated health care system's administrative databases and electronic health records system. Registry data collected undergo quality control and validation as well as statistical analysis. Patient safety has been enhanced through identification of affected patients during major recalls, identification of risk factors associated with outcomes of interest, development of risk calculators, and surveillance programs for infections and adverse events. Effective quality improvement activities included medical center- and surgeon-specific profiles for use in benchmarking reports, and changes in practice related to registry information output. Among the cost-effectiveness strategies employed were collaborations with sourcing and contracting groups, and assistance in adherence to formulary device guidelines. Research studies using registry data included postoperative complications, resource utilization, infection risk factors, thromboembolic prophylaxis, effects of surgical delay on concurrent injuries, and sports injury patterns. The unique KP implant registries provide important information and affect several areas of our organization, including patient safety, quality improvement, cost-effectiveness, and research.

Guide to active vaccine safety surveillance: Report of CIOMS working group on vaccine safety - executive summary.

PubMed

Heininger, U; Holm, K; Caplanusi, I; Bailey, S R

2017-07-13

In 2013, the Council for International Organizations of Medical Sciences (CIOMS) created a Working Group on Vaccine Safety (WG) to address unmet needs in the area of vaccine pharmacovigilance. Generating reliable data about specific vaccine safety concerns is becoming a priority due to recent progress in the development and deployment of new vaccines of global importance, as well as novel vaccines targeting diseases specifically endemic to many resource-limited countries (RLCs), e.g. malaria, dengue. The WG created a Guide to Active Vaccine Safety Surveillance (AVSS) to assist national regulatory authorities and national immunization program officers in RLCs in determining the best course of action with regards to non-routine pharmacovigilance activities, when confronted with a launch of a new vaccine or a vaccine that is new to their country. Here we summarize the results of the WG, further detailed in the Guide, which for the first time provides a structured approach to identifying and analyzing specific vaccines safety knowledge gaps, while considering all available sources of information, in order to determine whether AVSS is an appropriate solution. If AVSS is confirmed as being the appropriate tool, the Guide provides additional essential information on AVSS, a detailed overview of common types of AVSS and practical implementation considerations. It also provides a framework for a well-constructed and informative AVSS when needed, thus aiming to ensure the best possible safety of immunization in this new landscape. Copyright © 2017 Elsevier Ltd. All rights reserved.

Perception is reality: How patients contribute to poor workplace safety perceptions.

PubMed

McCaughey, Deirdre; McGhan, Gwen; DelliFraine, Jami L; Brannon, S Diane

2011-01-01

Nurses and aides are among the occupational subgroups with the highest injury rates and workdays lost to illness and injury in North America. Many studies have shown that these incidents frequently happen during provision of patient care. Moreover, health care workplaces are a source of numerous safety risks that contribute to worker injuries. These findings identify health care as a high-risk occupation for employee injury or illness. The purpose of this study was to examine the relationships among patient care, employee safety perceptions, and employee stress. Using the National Institute for Occupational Safety and Health Model of Job Stress and Health as a foundation, we developed and tested a conceptual workplace safety climate-stress model that explicates how caring for high-risk patients is a safety stressor that has negative outcomes for health care providers, including poor workplace safety perceptions and increasing stress levels. We introduced the concept of "high-risk patients" and define them as those who put providers at greater risk for injury or illness. Using a nonexperimental survey design, we examined patient types and safety perceptions of health care providers (nurses, aides, and allied health) in an acute care hospital. Health care providers who care for high-risk patients more frequently have poor safety climate perceptions and higher stress levels. Safety climate was found to mediate the relationship between high-risk patients and stress. These findings bring insight into actions health care organizations can pursue to improve health care provider well-being. Recognizing that different patients present different risks and pursuing staffing, training, and equipment to minimize employee risk of injury will help reduce the staggering injury rates experienced by these employees. Moreover, minimizing employee stress over poor workplace safety is achievable through comprehensive workplace safety climate programs that include supervisor, management, and organizational commitment to safety enhancement.

Safety Benefits of Access Spacing

DOT National Transportation Integrated Search

1997-01-01

The spacing of driveways and streets is an important element in roadway planning, design, and operation. Access points are the main source of accidents and congestion. Their location and spacing affects the safety and functional integrity of streets ...

Infection as a Background to Safety: Source Material for Teaching.

ERIC Educational Resources Information Center

Wyatt, H. V.

1986-01-01

Offers selections from papers which illustrate accidents, epidemics, and bad practices which could be used as background material for lessons on laboratory safety. Advocates the need for instruction on pathogenicity and infectivity. (ML)

EDITORIAL: Safety aspects of fusion power plants

NASA Astrophysics Data System (ADS)

Kolbasov, B. N.

2007-07-01

This special issue of Nuclear Fusion contains 13 informative papers that were initially presented at the 8th IAEA Technical Meeting on Fusion Power Plant Safety held in Vienna, Austria, 10-13 July 2006. Following recommendation from the International Fusion Research Council, the IAEA organizes Technical Meetings on Fusion Safety with the aim to bring together experts to discuss the ongoing work, share new ideas and outline general guidance and recommendations on different issues related to safety and environmental (S&E) aspects of fusion research and power facilities. Previous meetings in this series were held in Vienna, Austria (1980), Ispra, Italy (1983), Culham, UK (1986), Jackson Hole, USA (1989), Toronto, Canada (1993), Naka, Japan (1996) and Cannes, France (2000). The recognized progress in fusion research and technology over the last quarter of a century has boosted the awareness of the potential of fusion to be a practically inexhaustible and clean source of energy. The decision to construct the International Thermonuclear Experimental Reactor (ITER) represents a landmark in the path to fusion power engineering. Ongoing activities to license ITER in France look for an adequate balance between technological and scientific deliverables and complying with safety requirements. Actually, this is the first instance of licensing a representative fusion machine, and it will very likely shape the way in which a more common basis for establishing safety standards and policies for licensing future fusion power plants will be developed. Now that ITER licensing activities are underway, it is becoming clear that the international fusion community should strengthen its efforts in the area of designing the next generations of fusion power plants—demonstrational and commercial. Therefore, the 8th IAEA Technical Meeting on Fusion Safety focused on the safety aspects of power facilities. Some ITER-related safety issues were reported and discussed owing to their potential importance for the fusion power plant research programmes. The objective of this Technical Meeting was to examine in an integrated way all the safety aspects anticipated to be relevant to the first fusion power plant prototype expected to become operational by the middle of the century, leading to the first generation of economically viable fusion power plants with attractive S&E features. After screening by guest editors and consideration by referees, 13 (out of 28) papers were accepted for publication. They are devoted to the following safety topics: power plant safety; fusion specific operational safety approaches; test blanket modules; accident analysis; tritium safety and inventories; decommissioning and waste. The paper `Main safety issues at the transition from ITER to fusion power plants' by W. Gulden et al (EU) highlights the differences between ITER and future fusion power plants with magnetic confinement (off-site dose acceptance criteria, consequences of accidents inside and outside the design basis, occupational radiation exposure, and waste management, including recycling and/or final disposal in repositories) on the basis of the most recent European fusion power plant conceptual study. Ongoing S&E studies within the US inertial fusion energy (IFE) community are focusing on two design concepts. These are the high average power laser (HAPL) programme for development of a dry-wall, laser-driven IFE power plant, and the Z-pinch IFE programme for the production of an economically-attractive power plant using high-yield Z-pinch-driven targets. The main safety issues related to these programmes are reviewed in the paper `Status of IFE safety and environmental activities in the US' by S. Reyes et al (USA). The authors propose future directions of research in the IFE S&E area. In the paper `Recent accomplishments and future directions in the US Fusion Safety & Environmental Program' D. Petti et al (USA) state that the US fusion programme has long recognized that the S&E potential of fusion can be attained by prudent materials selection, judicious design choices, and integration of safety requirements into the design of the facility. To achieve this goal, S&E research is focused on understanding the behaviour of the largest sources of radioactive and hazardous materials in a fusion facility, understanding how energy sources in a fusion facility could mobilize those materials, developing integrated state-of-the-art S&E computer codes and risk tools for safety assessment, and evaluating and improving fusion facility design in terms of accident safety, worker safety, and waste disposal. There are three papers considering safety issues of the test blanket modules (TBM) producing tritium to be installed in ITER. These modules represent different concepts of demonstration fusion power facilities (DEMO). L. Boccaccini et al (Germany) analyses the possibility of jeopardizing the ITER safety under specific accidents in the European helium-cooled pebble-bed TBM, e.g. pressurization of the vacuum vessel (VV), hydrogen production from the Be-steam reaction, the possible interconnection between the port cell and VV causing air ingress. Safety analysis is also presented for Chinese TBM with a helium-cooled solid breeder to be tested in ITER by Z. Chen et al (China). Radiological inventories, afterheat, waste disposal ratings, electromagnetic characteristics, LOCA and tritium safety management are considered. An overview of a preliminary safety analysis performed for a US proposed TBM is presented by B. Merrill et al (USA). This DEMO relevant dual coolant liquid lead-lithium TBM has been explored both in the USA and EU. T. Pinna et al (Italy) summarize the six-year development of a failure rate database for fusion specific components on the basis of data coming from operating experience gained in various fusion laboratories. The activity began in 2001 with the study of the Joint European Torus vacuum and active gas handling systems. Two years later the neutral beam injectors and the power supply systems were considered. This year the ion cyclotron resonant heating system is under evaluation. I. Cristescu et al (Germany) present the paper `Tritium inventories and tritium safety design principles for the fuel cycle of ITER'. She and her colleagues developed the dynamic mathematical model (TRIMO) for tritium inventory evaluation within each system of the ITER fuel cycle in various operational scenarios. TRIMO is used as a tool for trade-off studies within the fuel cycle systems with the final goal of global tritium inventory minimization. M. Matsuyama et al (Japan) describes a new technique for in situ quantitative measurements of high-level tritium inventory and its distribution in the VV and tritium systems of ITER and future fusion reactors. This technique is based on utilization of x-rays induced by beta-rays emitting from tritium species. It was applied to three physical states of high-level tritium: to gaseous, aqueous and solid tritium retained on/in various materials. Finally, there are four papers devoted to safety issues in fusion reactor decommissioning and waste management. A paper by R. Pampin et al (UK) provides the revised radioactive waste analysis of two models in the PPCS. Another paper by M. Zucchetti (Italy), S.A. Bartenev (Russia) et al describes a radiochemical extraction technology for purification of V-Cr-Ti alloy components from activation products to the dose rate of 10 µSv/h allowing their clearance or hands-on recycling which has been developed and tested in laboratory stationary conditions. L. El-Guebaly (USA) and her colleagues submitted two papers. In the first paper she optimistically considers the possibility of replacing the disposal of fusion power reactor waste with recycling and clearance. Her second paper considers the implications of new clearance guidelines for nuclear applications, particularly for slightly irradiated fusion materials.

An investigation into online videos as a source of safety hazard reports.

PubMed

Nasri, Leila; Baghersad, Milad; Gruss, Richard; Marucchi, Nico Sung Won; Abrahams, Alan S; Ehsani, Johnathon P

2018-06-01

Despite the advantages of video-based product reviews relative to text-based reviews in detecting possible safety hazard issues, video-based product reviews have received no attention in prior literature. This study focuses on online video-based product reviews as possible sources to detect safety hazards. We use two common text mining methods - sentiment and smoke words - to detect safety issues mentioned in videos on the world's most popular video sharing platform, YouTube. 15,402 product review videos from YouTube were identified as containing either negative sentiment or smoke words, and were carefully manually viewed to verify whether hazards were indeed mentioned. 496 true safety issues (3.2%) were found. Out of 9,453 videos that contained smoke words, 322 (3.4%) mentioned safety issues, vs. only 174 (2.9%) of the 5,949 videos with negative sentiment words. Only 1% of randomly-selected videos mentioned safety hazards. Comparing the number of videos with true safety issues that contain sentiment words vs. smoke words in their title or description, we show that smoke words are a more accurate predictor of safety hazards in video-based product reviews than sentiment words. This research also discovers words that are indicative of true hazards versus false positives in online video-based product reviews. Practical applications: The smoke words lists and word sub-groups generated in this paper can be used by manufacturers and consumer product safety organizations to more efficiently identify product safety issues from online videos. This project also provides realistic baselines for resource estimates for future projects that aim to discover safety issues from online videos or reviews. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

Proceedings of the international meeting on thermal nuclear reactor safety. Vol. 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Separate abstracts are included for each of the papers presented concerning current issues in nuclear power plant safety; national programs in nuclear power plant safety; radiological source terms; probabilistic risk assessment methods and techniques; non LOCA and small-break-LOCA transients; safety goals; pressurized thermal shocks; applications of reliability and risk methods to probabilistic risk assessment; human factors and man-machine interface; and data bases and special applications.

Diversification of the Higher Mining Education Financing in Globalization Era

NASA Astrophysics Data System (ADS)

Frolova, Victoria; Dolina, Olga; Shpil'kina, Tatyana

2017-11-01

In the current conditions of global competition, the development of new mining technologies, the requirements to labor resources, their skills and creative potential are increasing. The tasks facing the mining industry cannot be solved without highly qualified personnel, especially managers, engineers and technicians, specialists who possess the knowledge and competences necessary for the development of science and technology of mining, and ensuring mining industrial safety. The authors analyze personnel problems and financing of mining higher education, conclude that there is a need to develop social partnership and diversify the sources of funding for training, advanced training and retraining of personnel for mining and processing of solid mineral deposits.

Unequally Safe: The Race Gap in School Safety. Working Paper #01-13

ERIC Educational Resources Information Center

Lacoe, Johanna

2013-01-01

Inequality in educational outcomes is a frequent topic of policy debate. This paper investigates one potential source of educational inequality--school safety. With panel survey data of middle school students, this paper estimates racial gaps in student feelings of safety in the classroom, in the hallways, and outside the school building, and how…

Improving multiple sclerosis management and collecting safety information in the real world: the MSDS3D software approach.

PubMed

Haase, Rocco; Wunderlich, Maria; Dillenseger, Anja; Kern, Raimar; Akgün, Katja; Ziemssen, Tjalf

2018-04-01

For safety evaluation, randomized controlled trials (RCTs) are not fully able to identify rare adverse events. The richest source of safety data lies in the post-marketing phase. Real-world evidence (RWE) and observational studies are becoming increasingly popular because they reflect usefulness of drugs in real life and have the ability to discover uncommon or rare adverse drug reactions. Areas covered: Adding the documentation of psychological symptoms and other medical disciplines, the necessity for a complex documentation becomes apparent. The collection of high-quality data sets in clinical practice requires the use of special documentation software as the quality of data in RWE studies can be an issue in contrast to the data obtained from RCTs. The MSDS3D software combines documentation of patient data with patient management of patients with multiple sclerosis. Following a continuous development over several treatment-specific modules, we improved and expanded the realization of safety management in MSDS3D with regard to the characteristics of different treatments and populations. Expert opinion: eHealth-enhanced post-authorisation safety study may complete the fundamental quest of RWE for individually improved treatment decisions and balanced therapeutic risk assessment. MSDS3D is carefully designed to contribute to every single objective in this process.

49 CFR 193.2915 - Alternative power sources.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Alternative power sources. 193.2915 Section 193.2915 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS... GAS FACILITIES: FEDERAL SAFETY STANDARDS Security § 193.2915 Alternative power sources. An alternative...

Closing the information gap: informing better medical decisionmaking through the use of post-market safety and comparative effectiveness information.

PubMed

Fox, Bethany

2012-01-01

While FDA gathers vast amounts of data about prescription drugs prior to their marketing approval, important information about the relative effectiveness and long term safety of products is not required for approval, and often is never collected. Increased postmarket research on the safety and comparative effectiveness of products would improve medical decisionmaking and lead to better clinical outcomes. Fortunately, Congress has recognized the value of this information for healthcare professionals. In response to a congressional mandate in the FDA Amendments Act (FDAAA), FDA is developing the Sentinel Initiative, an active surveillance system for monitoring postmarket drug safety issues. FDAAA also authorized FDA to require a drug sponsor to conduct postmarket safety studies or clinical trials to address a specific safety concern. To increase the repository of comparative effectiveness information, Congress established the Patient-Centered Outcomes Research Institute (PCORI) in the Patient Protection and Affordable Care Act (PPACA), directing it to manage comparative effectiveness research (CER). This article discusses the need for better safety and comparative effectiveness information and outlines methods to efficiently conduct the research and communicate it effectively to healthcare professionals. Coordination between FDA and the PCORI in gathering and communicating postmarket information is recommended. Medical source data collected by the Sentinel Initiative should be used for CER in addition to postmarket safety surveillance, and FDA and the PCORI should adopt identical standards for the distribution and communication of CER. Coordination between the two entities is recommended to save costs, reduce duplication of efforts, and to generate and communicate more information on prescription drugs for medical decisionmakers.

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 2: Accident Model Document (AMD)

NASA Technical Reports Server (NTRS)

1972-01-01

The Accident Model Document is one of three documents of the Preliminary Safety Analysis Report (PSAR) - Reactor System as applied to a Space Base Program. Potential terrestrial nuclear hazards involving the zirconium hydride reactor-Brayton power module are identified for all phases of the Space Base program. The accidents/events that give rise to the hazards are defined and abort sequence trees are developed to determine the sequence of events leading to the hazard and the associated probabilities of occurence. Source terms are calculated to determine the magnitude of the hazards. The above data is used in the mission accident analysis to determine the most probable and significant accidents/events in each mission phase. The only significant hazards during the prelaunch and launch ascent phases of the mission are those which arise form criticality accidents. Fission product inventories during this time period were found to be very low due to very limited low power acceptance testing.

[Level of implementation of the Program for Safety and Health at Work in Antioquia, Colombia].

PubMed

Vega-Monsalve, Ninfa Del Carmen

2017-07-13

This study describes the level of implementation of the Program for Safety and Health at Work in companies located in the Department of Antioquia, Colombia, and associated factors. A cross-sectional survey included 73 companies with more than 50 workers each and implementation of the program. A total of 65 interviews were held, in addition to 73 checklists and process reviews. The companies showed suboptimal compliance with the management model for workplace safety and health proposed by the International Labor Organization (ILO). The component with the best development was Organization (87%), and the worst was Policy (67%). Company executives contended that the causes of suboptimal implementation were the limited commitment by area directors and scarce budget resources. Risk management mostly aimed to comply with the legal requirements in order to avoid penalties, plus documenting cases. There was little implementation of effective checks and controls to reduce the sources of work accidents. The study concludes that workers' health management lacks effective strategies.

Design and application of a tool for structuring, capitalizing and making more accessible information and lessons learned from accidents involving machinery.

PubMed

Sadeghi, Samira; Sadeghi, Leyla; Tricot, Nicolas; Mathieu, Luc

2017-12-01

Accident reports are published in order to communicate the information and lessons learned from accidents. An efficient accident recording and analysis system is a necessary step towards improvement of safety. However, currently there is a shortage of efficient tools to support such recording and analysis. In this study we introduce a flexible and customizable tool that allows structuring and analysis of this information. This tool has been implemented under TEEXMA®. We named our prototype TEEXMA®SAFETY. This tool provides an information management system to facilitate data collection, organization, query, analysis and reporting of accidents. A predefined information retrieval module provides ready access to data which allows the user to quickly identify the possible hazards for specific machines and provides information on the source of hazards. The main target audience for this tool includes safety personnel, accident reporters and designers. The proposed data model has been developed by analyzing different accident reports.

Pulsed high-peak-power and single-frequency fibre laser design for LIDAR aircraft safety application

NASA Astrophysics Data System (ADS)

Liégeois, Flavien; Vercambre, Clément; Hernandez, Yves; Salhi, Mohamed; Giannone, Domenico

2006-09-01

Laser wind velocimeters work by monitoring the Doppler shift induced on the backscattered light by aerosols that are present in the air. Recently there has been a growing interest in the scientific community for developing systems operating at wavelengths near 1.5 μm and based on all-fibre lasers configuration. In this paper, we propose a new all-fibre laser source that is suitable for Doppler velocimetry in aircraft safety applications. The all-fibre laser has been specifically conceived for aircraft safety application. Our prototype has a conveniently narrow linewidth (9 kHz) and is modulated and amplified through an all fibre Master Oscillator Power Amplifier (MOPA) configuration. According to the measurements, we performed the final characteristics of the laser consist in a maximum peak power of 2.7 kW and an energy of 27 μJ energy per pulses of 10 ns at 30 kHz repetition rate. The only limiting factor of these performances is the Stimulated Brillouin Scattering.

Database Design to Ensure Anonymous Study of Medical Errors: A Report from the ASIPS collaborative

PubMed Central

Pace, Wilson D.; Staton, Elizabeth W.; Higgins, Gregory S.; Main, Deborah S.; West, David R.; Harris, Daniel M.

2003-01-01

Medical error reporting systems are important information sources for designing strategies to improve the safety of health care. Applied Strategies for Improving Patient Safety (ASIPS) is a multi-institutional, practice-based research project that collects and analyzes data on primary care medical errors and develops interventions to reduce error. The voluntary ASIPS Patient Safety Reporting System captures anonymous and confidential reports of medical errors. Confidential reports, which are quickly de-identified, provide better detail than do anonymous reports; however, concerns exist about the confidentiality of those reports should the database be subject to legal discovery or other security breaches. Standard database elements, for example, serial ID numbers, date/time stamps, and backups, could enable an outsider to link an ASIPS report to a specific medical error. The authors present the design and implementation of a database and administrative system that reduce this risk, facilitate research, and maintain near anonymity of the events, practices, and clinicians. PMID:12925548

Specification and Error Pattern Based Program Monitoring

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Johnson, Scott; Rosu, Grigore; Clancy, Daniel (Technical Monitor)

2001-01-01

We briefly present Java PathExplorer (JPAX), a tool developed at NASA Ames for monitoring the execution of Java programs. JPAX can be used not only during program testing to reveal subtle errors, but also can be applied during operation to survey safety critical systems. The tool facilitates automated instrumentation of a program in order to properly observe its execution. The instrumentation can be either at the bytecode level or at the source level when the source code is available. JPaX is an instance of a more general project, called PathExplorer (PAX), which is a basis for experiments rather than a fixed system, capable of monitoring various programming languages and experimenting with other logics and analysis techniques

NASA's Core Trajectory Sub-System Project: Using JBoss Enterprise Middleware for Building Software Systems Used to Support Spacecraft Trajectory Operations

NASA Technical Reports Server (NTRS)

Stensrud, Kjell C.; Hamm, Dustin

2007-01-01

NASA's Johnson Space Center (JSC) / Flight Design and Dynamics Division (DM) has prototyped the use of Open Source middleware technology for building its next generation spacecraft mission support system. This is part of a larger initiative to use open standards and open source software as building blocks for future mission and safety critical systems. JSC is hoping to leverage standardized enterprise architectures, such as Java EE, so that its internal software development efforts can be focused on the core aspects of their problem domain. This presentation will outline the design and implementation of the Trajectory system and the lessons learned during the exercise.

BCI federal legislative & regulatory update

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-02-01

Several updates on recent government actions that affect the battery industry are outlined. The National Highway Traffic Safety Administration is requesting public comments on how to regulate electric vehicles (EV) with respect to battery electrolyte spillage and electric shock hazard during crashes or rollovers, as well as during repair or maintenance. The Environmental Protection Agency (EPA) was mentioned in two actions: the monitoring rule regarding major sources of air pollution and the reccomendation of reasearch concerning hazardous air pollutants from small stationary sources. OSHA will develop a new standards planning process to ensure that the agency`s limited resources are usedmore » appropriately. This includes a list of fifty workplace hazards or issues that would warrant OSHA action.« less

The radioactive beam facility ALTO

NASA Astrophysics Data System (ADS)

Essabaa, Saïd; Barré-Boscher, Nicole; Cheikh Mhamed, Maher; Cottereau, Evelyne; Franchoo, Serge; Ibrahim, Fadi; Lau, Christophe; Roussière, Brigitte; Saïd, Abdelhakim; Tusseau-Nenez, Sandrine; Verney, David

2013-12-01

The Transnational Access facility ALTO (TNA07-ENSAR/FP7) has been commissioned and received from the French safety authorities, the operation license. It is allowed to run at nominal intensity to produce 1011 fissions/s in a thick uranium carbide target by photo-fission using a 10 μA, 50 MeV electron beam. In addition the recent success in operating the selective laser ion source broadens the physics program with neutron-rich nuclear beams possible at this facility installed at IPN Orsay. The facility also aims at being a test bench for the SPIRAL2 project. In that framework an ambitious R&D program on the target ion source system is being developed.

Alternative Cell Sources to Adult Hepatocytes for Hepatic Cell Therapy.

PubMed

Pareja, Eugenia; Gómez-Lechón, María José; Tolosa, Laia

2017-01-01

Adult hepatocyte transplantation is limited by scarce availability of suitable donor liver tissue for hepatocyte isolation. New cell-based therapies are being developed to supplement whole-organ liver transplantation, to reduce the waiting-list mortality rate, and to obtain more sustained and significant metabolic correction. Fetal livers and unsuitable neonatal livers for organ transplantation have been proposed as potential useful sources of hepatic cells for cell therapy. However, the major challenge is to use alternative cell sources for transplantation that can be derived from reproducible methods. Different types of stem cells with hepatic differentiation potential are eligible for generating large numbers of functional hepatocytes for liver cell therapy to treat degenerative disorders, inborn hepatic metabolic diseases, and organ failure. Clinical trials are designed to fully establish the safety profile of such therapies and to define target patient groups and standardized protocols.

MO-A-BRC-00: TG167: Clinical Recommendations for Innovative Brachytherapy Devices and Applicators

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used to evaluate innovative radiotherapy devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining equivalence of the innovative device to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of an innovative brachytherapy device or application is a critical part in which physicists are actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative products or applications and includes evaluation of 1)more » dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, 2) risks and benefits from regulatory and safety perspectives, and 3) resource assessment and preparedness. Further, calibration methods should be traceable to a primary standards dosimetry laboratory such as NIST in the U.S. or to other primary standards dosimetry laboratory located elsewhere. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the ADCLs is encouraged before a source is introduced into widespread routine clinical use. The AAPM and GEC-ESTRO have developed guidelines for the safe and consistent application of brachytherapy using innovative brachytherapy devices and applications. The current report covers regulatory approvals, calibration, dose calculations, radiobiological issues, and overall safety concerns that should be addressed during the commissioning stage preceding clinical use. These guidelines are based on review of requirements of the U.S. NRC, FDA, Department of Transportation, International Electrotechnical Commission Medical Electrical Equipment Standard 60601, European Commission for CE Marking, and institutional review boards and radiation safety committees. Learning Objectives: Understand the necessary dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use. Evaluate risks and benefits from regulatory and safety perspectives. Identify necessary resources and create a plan for clinical introduction of innovative brachytherapy device or applications. Consultant for Theragenics Corp.; R. Nath, Consultant to Theragenics Corp.« less

MO-A-BRC-02: TG167 Report - Detailed Description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rivard, M.

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used to evaluate innovative radiotherapy devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining equivalence of the innovative device to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of an innovative brachytherapy device or application is a critical part in which physicists are actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative products or applications and includes evaluation of 1)more » dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, 2) risks and benefits from regulatory and safety perspectives, and 3) resource assessment and preparedness. Further, calibration methods should be traceable to a primary standards dosimetry laboratory such as NIST in the U.S. or to other primary standards dosimetry laboratory located elsewhere. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the ADCLs is encouraged before a source is introduced into widespread routine clinical use. The AAPM and GEC-ESTRO have developed guidelines for the safe and consistent application of brachytherapy using innovative brachytherapy devices and applications. The current report covers regulatory approvals, calibration, dose calculations, radiobiological issues, and overall safety concerns that should be addressed during the commissioning stage preceding clinical use. These guidelines are based on review of requirements of the U.S. NRC, FDA, Department of Transportation, International Electrotechnical Commission Medical Electrical Equipment Standard 60601, European Commission for CE Marking, and institutional review boards and radiation safety committees. Learning Objectives: Understand the necessary dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use. Evaluate risks and benefits from regulatory and safety perspectives. Identify necessary resources and create a plan for clinical introduction of innovative brachytherapy device or applications. Consultant for Theragenics Corp.; R. Nath, Consultant to Theragenics Corp.« less

MO-A-BRC-01: TG167 Report - Introduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nath, R.

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used to evaluate innovative radiotherapy devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining equivalence of the innovative device to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of an innovative brachytherapy device or application is a critical part in which physicists are actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative products or applications and includes evaluation of 1)more » dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, 2) risks and benefits from regulatory and safety perspectives, and 3) resource assessment and preparedness. Further, calibration methods should be traceable to a primary standards dosimetry laboratory such as NIST in the U.S. or to other primary standards dosimetry laboratory located elsewhere. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the ADCLs is encouraged before a source is introduced into widespread routine clinical use. The AAPM and GEC-ESTRO have developed guidelines for the safe and consistent application of brachytherapy using innovative brachytherapy devices and applications. The current report covers regulatory approvals, calibration, dose calculations, radiobiological issues, and overall safety concerns that should be addressed during the commissioning stage preceding clinical use. These guidelines are based on review of requirements of the U.S. NRC, FDA, Department of Transportation, International Electrotechnical Commission Medical Electrical Equipment Standard 60601, European Commission for CE Marking, and institutional review boards and radiation safety committees. Learning Objectives: Understand the necessary dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use. Evaluate risks and benefits from regulatory and safety perspectives. Identify necessary resources and create a plan for clinical introduction of innovative brachytherapy device or applications. Consultant for Theragenics Corp.; R. Nath, Consultant to Theragenics Corp.« less

Feedback from incident reporting: information and action to improve patient safety.

PubMed

Benn, J; Koutantji, M; Wallace, L; Spurgeon, P; Rejman, M; Healey, A; Vincent, C

2009-02-01

Effective feedback from incident reporting systems in healthcare is essential if organisations are to learn from failures in the delivery of care. Despite the wide-scale development and implementation of incident reporting in healthcare, studies in the UK suggest that information concerning system vulnerabilities could be better applied to improve operational safety within organisations. In this article, the findings and implications of research to identify forms of effective feedback from incident reporting are discussed, to promote best practices in this area. The research comprised a mixed methods review to investigate mechanisms of effective feedback for healthcare, drawing upon experience within established reporting programmes in high-risk industry and transport domains. Systematic searches of published literature were undertaken, and 23 case studies describing incident reporting programmes with feedback were identified for analysis from the international healthcare literature. Semistructured interviews were undertaken with 19 subject matter experts across a range of domains, including: civil aviation, maritime, energy, rail, offshore production and healthcare. In analysis, qualitative information from several sources was synthesised into practical requirements for developing effective feedback in healthcare. Both action and information feedback mechanisms were identified, serving safety awareness, improvement and motivational functions. The provision of actionable feedback that visibly improved systems was highlighted as important in promoting future reporting. Fifteen requirements for the design of effective feedback systems were identified, concerning: the role of leadership, the credibility and content of information, effective dissemination channels, the capacity for rapid action and the need for feedback at all levels of the organisation, among others. Above all, the safety-feedback cycle must be closed by ensuring that reporting, analysis and investigation result in timely corrective actions that effectively address vulnerabilities in existing work systems. Limited research evidence exists concerning the issue of effective forms of safety feedback within healthcare. Much valuable operational knowledge resides in safety management communities within high-risk industries. Multiple means of feeding back recommended actions and safety information may be usefully employed to promote safety awareness, improve clinical processes and promote future reporting. Further work is needed to establish best practices for feedback systems in healthcare that effectively close the safety loop.

Leveraging brightness from transportation lighting systems through light source color.

DOT National Transportation Integrated Search

2013-11-01

Roadway transportation lighting is installed for multiple reasons including traffic safety and pedestrian : security. Judgments of pedestrian safety and security along roadways are not strictly correlated to : specified light levels, but the color of...

Key Assets for a Sustainable Low Carbon Energy Future

NASA Astrophysics Data System (ADS)

Carre, Frank

2011-10-01

Since the beginning of the 21st century, concerns of energy security and climate change gave rise to energy policies focused on energy conservation and diversified low-carbon energy sources. Provided lessons of Fukushima accident are evidently accounted for, nuclear energy will probably be confirmed in most of today's nuclear countries as a low carbon energy source needed to limit imports of oil and gas and to meet fast growing energy needs. Future challenges of nuclear energy are then in three directions: i) enhancing safety performance so as to preclude any long term impact of severe accident outside the site of the plant, even in case of hypothetical external events, ii) full use of Uranium and minimization long lived radioactive waste burden for sustainability, and iii) extension to non-electricity energy products for maximizing the share of low carbon energy source in transportation fuels, industrial process heat and district heating. Advanced LWRs (Gen-III) are today's best available technologies and can somewhat advance nuclear energy in these three directions. However, breakthroughs in sustainability call for fast neutron reactors and closed fuel cycles, and non-electric applications prompt a revival of interest in high temperature reactors for exceeding cogeneration performances achievable with LWRs. Both types of Gen-IV nuclear systems by nature call for technology breakthroughs to surpass LWRs capabilities. Current resumption in France of research on sodium cooled fast neutron reactors (SFRs) definitely aims at significant progress in safety and economic competitiveness compared to earlier reactors of this type in order to progress towards a new generation of commercially viable sodium cooled fast reactor. Along with advancing a new generation of sodium cooled fast reactor, research and development on alternative fast reactor types such as gas or lead-alloy cooled systems (GFR & LFR) is strategic to overcome technical difficulties and/or political opposition specific to sodium. In conclusion, research and technology breakthroughs in nuclear power are needed for shaping a sustainable low carbon future. International cooperation is key for sharing costs of research and development of the required novel technologies and cost of first experimental reactors needed to demonstrate enabling technologies. At the same time technology breakthroughs are developed, pre-normative research is required to support codification work and harmonized regulations that will ultimately apply to safety and security features of resulting innovative reactor types and fuel cycles.

Perceived organizational support for safety and employee safety voice: the mediating role of coworker support for safety.

PubMed

Tucker, Sean; Chmiel, Nik; Turner, Nick; Hershcovis, M Sandy; Stride, Chris B

2008-10-01

In the present study, we modeled 2 sources of safety support (perceived organizational support for safety and perceived coworker support for safety) as predictors of employee safety voice, that is, speaking out in an attempt to change unsafe working conditions. Drawing on social exchange and social impact theories, we hypothesized and tested a mediated model predicting employee safety voice using a cross-sectional survey of urban bus drivers (n = 213) in the United Kingdom. Hierarchical regression analysis showed that perceived coworker support for safety fully mediated the relationship between perceived organizational support for safety and employee safety voice. This study adds to the employee voice literature by evaluating the important role that coworkers can play in encouraging others to speak out about safety issues. Implications for research and practice related to change-oriented safety communication are discussed.

A summary description of the flammable gas tank safety program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, G.D.; Sherwood, D.J.

1994-10-01

Radioactive liquid waste may produce hydrogen as result of the interaction of gamma radiation and water. If the waste contains organic chelating agents, additional hydrogen as well as nitrous oxide and ammonia may be produced by thermal and radiolytic decomposition of these organics. Several high-level radioactive liquid waste storage tanks, located underground at the Hanford Site in Washington State, are on a Flammable Gas Watch List. Some contain waste that produces and retains gases until large quantities of gas are released rapidly to the tank vapor space. Tanks nearly-filled to capacity have relatively little vapor space; therefore if the wastemore » suddenly releases a large amount of hydrogen and nitrous oxide, a flammable gas mixture could result. The most notable example of a Hanford waste tank with a flammable gas problem is tank 241-SY-101. Upon occasion waste stored in this tank has released enough flammable gas to burn if an ignition source had been present inside of the tank. Several, other Hanford waste tanks exhibit similar behavior although to a lesser magnitude. Because this behavior was hot adequately-addressed in safety analysis reports for the Hanford Tank Farms, an unreviewed safety question was declared, and in 1990 the Flammable Gas Tank Safety Program was established to address this problem. The purposes of the program are a follows: (1) Provide safety documents to fill gaps in the safety analysis reports, and (2) Resolve the safety issue by acquiring knowledge about gas retention and release from radioactive liquid waste and developing mitigation technology. This document provides the general logic and work activities required to resolve the unreviewed safety question and the safety issue of flammable gas mixtures in radioactive liquid waste storage tanks.« less

Java Source Code Analysis for API Migration to Embedded Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winter, Victor; McCoy, James A.; Guerrero, Jonathan

Embedded systems form an integral part of our technological infrastructure and oftentimes play a complex and critical role within larger systems. From the perspective of reliability, security, and safety, strong arguments can be made favoring the use of Java over C in such systems. In part, this argument is based on the assumption that suitable subsets of Java’s APIs and extension libraries are available to embedded software developers. In practice, a number of Java-based embedded processors do not support the full features of the JVM. For such processors, source code migration is a mechanism by which key abstractions offered bymore » APIs and extension libraries can made available to embedded software developers. The analysis required for Java source code-level library migration is based on the ability to correctly resolve element references to their corresponding element declarations. A key challenge in this setting is how to perform analysis for incomplete source-code bases (e.g., subsets of libraries) from which types and packages have been omitted. This article formalizes an approach that can be used to extend code bases targeted for migration in such a manner that the threats associated the analysis of incomplete code bases are eliminated.« less

WORK SAFETY CONDITIONS WITH CLOSED RADIATION SOURCES (in Polish)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brosziewicz, R.

1963-01-01

A discussion is presented of principles of radiological protection observed in the Radiation Chemistry Dept. of the Nuclear Research Inst., during operation of large sources of ionizing radiation. It has been revealed that a properly designed servicing system of these sources ensures full protection of personnel even with not fully protected sources. (auth)

30 CFR 57.6404 - Separation of blasting circuits from power source.

Code of Federal Regulations, 2010 CFR

2010-07-01

... source. 57.6404 Section 57.6404 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF... circuits from power source. (a) Switches used to connect the power source to a blasting circuit shall be locked in the open position except when closed to fire the blast. (b) Lead wires shall not be connected...

Passive Safety Features Evaluation of KIPT Neutron Source Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhong, Zhaopeng; Gohar, Yousry

2016-06-01

Argonne National Laboratory (ANL) of the United States and Kharkov Institute of Physics and Technology (KIPT) of Ukraine have cooperated on the development, design, and construction of a neutron source facility. The facility was constructed at Kharkov, Ukraine and its commissioning process is underway. It will be used to conduct basic and applied nuclear research, produce medical isotopes, and train young nuclear specialists. The facility has an electron accelerator-driven subcritical assembly. The electron beam power is 100 kW using 100 MeV electrons. Tungsten or natural uranium is the target material for generating neutrons driving the subcritical assembly. The subcritical assemblymore » is composed of WWR-M2 - Russian fuel assemblies with U-235 enrichment of 19.7 wt%, surrounded by beryllium reflector assembles and graphite blocks. The subcritical assembly is seated in a water tank, which is a part of the primary cooling loop. During normal operation, the water coolant operates at room temperature and the total facility power is ~300 KW. The passive safety features of the facility are discussed in in this study. Monte Carlo computer code MCNPX was utilized in the analyses with ENDF/B-VII.0 nuclear data libraries. Negative reactivity temperature feedback was consistently observed, which is important for the facility safety performance. Due to the design of WWR-M2 fuel assemblies, slight water temperature increase and the corresponding water density decrease produce large reactivity drop, which offset the reactivity gain by mistakenly loading an additional fuel assembly. The increase of fuel temperature also causes sufficiently large reactivity decrease. This enhances the facility safety performance because fuel temperature increase provides prompt negative reactivity feedback. The reactivity variation due to an empty fuel position filled by water during the fuel loading process is examined. Also, the loading mistakes of removing beryllium reflector assemblies and replacing them with dummy assemblies were analyzed. In all these circumstances, the reactivity change results do not cause any safety concerns.« less

Observations and lessons learnt from more than a decade of water safety planning in South-East Asia.

PubMed

Sutherland, David

2017-09-01

In many countries of the World Health Organization (WHO) South-East Asia Region, drinking water is not used directly from the tap and faecal contamination of water sources is prevalent. As reflected in Sustainable Development Goal 6, access to safer drinking water is one of the most successful ways of preventing disease. The WHO Water Safety Framework promotes the use of water safety plans (WSPs), which are structured tools that help identify and mitigate potential risks throughout a water-supply system, from the water source to the point of use. WSPs not only help prevent outbreaks of acute and chronic waterborne diseases but also improve water-supply management and performance. During the past 12 years, through the direct and indirect work of a water quality partnership supported by the Australian Government, more than 5000 urban and rural WSPs have been implemented in the region. An impact assessment based on pre- and post-WSP surveys suggests that WSPs have improved system operations and management, infrastructure and performance; leveraged donor funds; increased stakeholder communication and collaboration; increased testing of water quality; and increased monitoring of consumer satisfaction. These achievements, and their sustainability, are being achieved through national legislation and regulatory frameworks for water supply, including quality standards for drinking water; national training tools and extensive training of sector professionals and creation of WSP experts; model WSPs; WSP auditing systems; and the institution of longterm training and support. More than a decade of water safety planning using the WSP approach has shown that supplying safe drinking water at the tap throughout the WHO South-East Asia Region is a realistic goal.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grabaskas, David; Brunett, Acacia J.; Passerini, Stefano

GE Hitachi Nuclear Energy (GEH) and Argonne National Laboratory (Argonne) participated in a two year collaboration to modernize and update the probabilistic risk assessment (PRA) for the PRISM sodium fast reactor. At a high level, the primary outcome of the project was the development of a next-generation PRA that is intended to enable risk-informed prioritization of safety- and reliability-focused research and development. A central Argonne task during this project was a reliability assessment of passive safety systems, which included the Reactor Vessel Auxiliary Cooling System (RVACS) and the inherent reactivity feedbacks of the metal fuel core. Both systems were examinedmore » utilizing a methodology derived from the Reliability Method for Passive Safety Functions (RMPS), with an emphasis on developing success criteria based on mechanistic system modeling while also maintaining consistency with the Fuel Damage Categories (FDCs) of the mechanistic source term assessment. This paper provides an overview of the reliability analyses of both systems, including highlights of the FMEAs, the construction of best-estimate models, uncertain parameter screening and propagation, and the quantification of system failure probability. In particular, special focus is given to the methodologies to perform the analysis of uncertainty propagation and the determination of the likelihood of violating FDC limits. Additionally, important lessons learned are also reviewed, such as optimal sampling methodologies for the discovery of low likelihood failure events and strategies for the combined treatment of aleatory and epistemic uncertainties.« less

A Semantic Transformation Methodology for the Secondary Use of Observational Healthcare Data in Postmarketing Safety Studies.

PubMed

Pacaci, Anil; Gonul, Suat; Sinaci, A Anil; Yuksel, Mustafa; Laleci Erturkmen, Gokce B

2018-01-01

Background: Utilization of the available observational healthcare datasets is key to complement and strengthen the postmarketing safety studies. Use of common data models (CDM) is the predominant approach in order to enable large scale systematic analyses on disparate data models and vocabularies. Current CDM transformation practices depend on proprietarily developed Extract-Transform-Load (ETL) procedures, which require knowledge both on the semantics and technical characteristics of the source datasets and target CDM. Purpose: In this study, our aim is to develop a modular but coordinated transformation approach in order to separate semantic and technical steps of transformation processes, which do not have a strict separation in traditional ETL approaches. Such an approach would discretize the operations to extract data from source electronic health record systems, alignment of the source, and target models on the semantic level and the operations to populate target common data repositories. Approach: In order to separate the activities that are required to transform heterogeneous data sources to a target CDM, we introduce a semantic transformation approach composed of three steps: (1) transformation of source datasets to Resource Description Framework (RDF) format, (2) application of semantic conversion rules to get the data as instances of ontological model of the target CDM, and (3) population of repositories, which comply with the specifications of the CDM, by processing the RDF instances from step 2. The proposed approach has been implemented on real healthcare settings where Observational Medical Outcomes Partnership (OMOP) CDM has been chosen as the common data model and a comprehensive comparative analysis between the native and transformed data has been conducted. Results: Health records of ~1 million patients have been successfully transformed to an OMOP CDM based database from the source database. Descriptive statistics obtained from the source and target databases present analogous and consistent results. Discussion and Conclusion: Our method goes beyond the traditional ETL approaches by being more declarative and rigorous. Declarative because the use of RDF based mapping rules makes each mapping more transparent and understandable to humans while retaining logic-based computability. Rigorous because the mappings would be based on computer readable semantics which are amenable to validation through logic-based inference methods.

Brookhaven highlights for fiscal year 1991, October 1, 1990--September 30, 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rowe, M.S.; Cohen, A.; Greenberg, D.

1991-12-31

This report highlights Brookhaven National Laboratory`s activities for fiscal year 1991. Topics from the four research divisions: Computing and Communications, Instrumentation, Reactors, and Safety and Environmental Protection are presented. The research programs at Brookhaven are diverse, as is reflected by the nine different scientific departments: Accelerator Development, Alternating Gradient Synchrotron, Applied Science, Biology, Chemistry, Medical, National Synchrotron Light Source, Nuclear Energy, and Physics. Administrative and managerial information about Brookhaven are also disclosed. (GHH)

Brookhaven highlights for fiscal year 1991, October 1, 1990--September 30, 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rowe, M.S.; Cohen, A.; Greenberg, D.

1991-01-01

This report highlights Brookhaven National Laboratory's activities for fiscal year 1991. Topics from the four research divisions: Computing and Communications, Instrumentation, Reactors, and Safety and Environmental Protection are presented. The research programs at Brookhaven are diverse, as is reflected by the nine different scientific departments: Accelerator Development, Alternating Gradient Synchrotron, Applied Science, Biology, Chemistry, Medical, National Synchrotron Light Source, Nuclear Energy, and Physics. Administrative and managerial information about Brookhaven are also disclosed. (GHH)

Small-Scale Terrorist Attacks Using Chemical and Biological Agents: An Assessment Framework and Preliminary Comparisons

DTIC Science & Technology

2004-06-23

Vibrio cholerae ) + — — — + Unknown Salmonella Typhimurium + — + — — Unknown Typhoid fever (Salmonella Typhi) + O — — — Unknown Source: This...disseminated by contamination of food or drink. Cholera bb ( Vibrio cholerae ) Cholera occurs in many of the developing countries of Africa and Asia...diseaseinfo/cholera_g.htm]; the Health Canada Material Safety Data Sheet - Infectious Substances for Vibrio cholerae , found online at [http://www.hc-sc.gc.ca

Ethical perspectives on living donor organ transplantation in Asia.

PubMed

Concejero, Allan M; Chen, Chao-Long

2009-12-01

Live donors are a continuing source of organ grafts for solid organ transplantation in Asia. Ethical issues surrounding the development of living donor organ transplantation in Eastern countries are different from those in Western countries. Donor safety is still the paramount concern in any donor operation. Issues on organ trafficking remain societal concerns in low-income nations. Religion, cultural background, economic prerogatives, and timely legislation contribute to the social acceptance and maturation of organ donation.

Interpretation of Simultaneous Mechanical-Electrical-Thermal Failure in a Lithium-Ion Battery Module: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Chao; Santhanagopalan, Shriram; Stock, Mark J.

Lithium-ion batteries are currently the state-of- the-art power sources for electric vehicles, and their safety behavior when subjected to abuse, such as a mechanical impact, is of critical concern. A coupled mechanical-electrical-thermal model for simulating the behavior of a lithium-ion battery under a mechanical crush has been developed. We present a series of production-quality visualizations to illustrate the complex mechanical and electrical interactions in this model.

Biosafety considerations for selectable and scorable markers used in cassava (Manihot esculenta Crantz) biotechnology.

PubMed

Petersen, William; Umbeck, Paul; Hokanson, Karen; Halsey, Mark

2005-01-01

Cassava is an important subsistence crop grown only in the tropics, and represents a major source of calories for many people in developing countries. Improvements in the areas of resistance to insects and viral diseases, enhanced nutritional qualities, reduced cyanogenic content and modified starch characteristics are urgently needed. Traditional breeding is hampered by the nature of the crop, which has a high degree of heterozygosity, irregular flowering, and poor seed set. Biotechnology has the potential to enhance crop improvement efforts, and genetic engineering techniques for cassava have thus been developed over the past decade. Selectable and scorable markers are critical to efficient transformation technology, and must be evaluated for biosafety, as well as efficiency and cost-effectiveness. In order to facilitate research planning and regulatory submission, the literature on biosafety aspects of the selectable and scorable markers currently used in cassava biotechnology is surveyed. The source, mode of action and current use of each marker gene is described. The potential for toxicity, allergenicity, pleiotropic effects, horizontal gene transfer, and the impact of these on food or feed safety and environmental safety is evaluated. Based on extensive information, the selectable marker genes nptII, hpt, bar/pat, and manA, and the scorable marker gene uidA, all have little risk in terms of biosafety. These appear to represent the safest options for use in cassava biotechnology available at this time.

Performance and Safety to NAVSEA Instruction 9310.1A of Lithium-thionyl Chloride Reserve Batteries

NASA Technical Reports Server (NTRS)

Hall, J. C.

1984-01-01

The design, performance and safety of a fully engineered, selfcontained Li/SOCl2 battery as the power source for underwater applications. In addition to meeting the performance standards of the end user this battery is successfully tested under the rigorous safety conditions of NAVSEA Instruction 9310.1A for use on land, aircraft and surface ships.

The Level of Awareness of Safety Measures Practiced in School Laboratories among Pre-Service Science Teachers at Najran University

ERIC Educational Resources Information Center

Fagihi, Yahea Ali

2018-01-01

This study is an attempt to identify the level of awareness of safety measures practiced in school laboratories among pre-service Science teachers at Najran University. It also aims to identify the sources of safety measures awareness and the statistically significant differences among the sample responses due to specialization and grade…

Exploration of impact measures of safety belt use laws. Volume 1

DOT National Transportation Integrated Search

1990-02-01

Author's abstract: This project identified, evaluated, and recommended indicators of safety belt use law (SBUL) impact (other than fatality reduction and observed belt usage), as well as institutional sources that collect them. The project involved a...

30 CFR 56.6404 - Separation of blasting circuits from power source.

Code of Federal Regulations, 2010 CFR

2010-07-01

... LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL... when closed to fire the blast. (b) Lead wires shall not be connected to the blasting switch until the...

Optimal Remote Sensing with Small Unmanned Aircraft Systems and Risk Management

NASA Astrophysics Data System (ADS)

Stark, Brandon

Over the past decade, the rapid rise of Unmanned Aircraft Systems (UASs) has blossomed into a new component of the aviation industry. Though regulations within the United States lagged, the promise of the ability of Small Unmanned Aircraft Systems (SUASs), or those UAS that weigh less than 55 lbs, has driven significant advances in small scale aviation technology. The dream of a small, low-cost aerial platform that can fly anywhere and keep humans safely away from the `dull, dangerous and dirty' jobs, has encouraged many to examine the possibilities of utilizing SUAS in new and transformative ways, especially as a new tool in remote sensing. However, as with any new tool, there remains significant challenges in realizing the full potential of SUAS-based remote sensing. Within this dissertation, two specific challenges are addressed: validating the use of SUAS as a remote sensing platform and improving the safety and management of SUAS. The use of SUAS in remote sensing is a relatively new challenge and while it has many similarities to other remote sensing platforms, the dynamic nature of its operation makes it unique. In this dissertation, a closer look at the methodology of using SUAS reveals that while many view SUAS as an alternative to satellite imagery, this is an incomplete view and that the current common implementation introduces a new source of error that has significant implications on the reliability of the data collected. It can also be seen that a new approach to remote sensing with an SUAS can be developed by addressing the spatial, spectral and temporal factors that can now be more finely adjusted with the use of SUAS. However, to take the full advantage of the potential of SUAS, they must uphold the promise of improved safety. This is not a trivial challenge, especially for the integration into the National Airspace System (NAS) and for the safety management and oversight of diverse UAS operations. In this dissertation, the challenge of integrating SUAS in the NAS is addressed by presenting an analysis of enabling flight operations at night, developing a swarm safety management system for improving SUAS robustness, investigating the use of new technology on SUAS to improve air safety, and developing a novel framework to better understand human-SUAS interaction. Addressing the other side of safety, this dissertation discusses the struggle of large diverse organizations to balance acceptance, safety and oversight for UAS operations and the development of a novel implementation of a UAS Safety Management System.

Nuclear criticality safety: 5-day training course

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schlesser, J.A.

1992-11-01

This compilation of notes is presented as a source reference for the criticality safety course. It represents the contributions of many people, particularly Tom McLaughlin, the course's primary instructor. At the completion of this training course, the attendee will: be able to define terms commonly used in nuclear criticality safety; be able to appreciate the fundamentals of nuclear criticality safety; be able to identify factors which affect nuclear criticality safety; be able to identify examples of criticality controls as used at Los Alamos; be able to identify examples of circumstances present during criticality accidents; be able to identify examples ofmore » computer codes used by the nuclear criticality safety specialist; be able to identify examples of safety consciousness required in nuclear criticality safety.« less

Overview of bureau research directed towards surface powered haulage safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

May, J.P.; Aldinger, J.A.

1995-12-31

Surface mining operations, including mills and preparation plants, employ over 260,000 people. This represents a significant contribution to our nation`s economy and an important source of skilled and well-paying jobs. As mine production has shifted from underground to surface, and with continuing advances in underground mine safety, surface mining has unfortunately become the leader in mine fatalities. In 1994 surface mining accidents accounted for 49% of all mine fatalities, followed by underground mining with 37% and mills and preparation plants with 14%. The U.S. Bureau of Mines (USBM) has targeted surface mining as an important research priority to reduce themore » social and economic costs associated with fatalities and lost-work-time injuries. USBM safety research focuses on the development of technologies that can enhance productivity and reduce mining costs through a reduction in the number and severity of mining accidents. This report summarizes a number of completed and ongoing research programs directed towards surface powered haulage--the single largest category of fatalities in surface mining and a major cause of lost workdays. Research products designed for industry are highlighted and future USBM surface mining safety research is discussed.« less

Comprehensive target populations for current active safety systems using national crash databases.

PubMed

Kusano, Kristofer D; Gabler, Hampton C

2014-01-01

The objective of active safety systems is to prevent or mitigate collisions. A critical component in the design of active safety systems is the identification of the target population for a proposed system. The target population for an active safety system is that set of crashes that a proposed system could prevent or mitigate. Target crashes have scenarios in which the sensors and algorithms would likely activate. For example, the rear-end crash scenario, where the front of one vehicle contacts another vehicle traveling in the same direction and in the same lane as the striking vehicle, is one scenario for which forward collision warning (FCW) would be most effective in mitigating or preventing. This article presents a novel set of precrash scenarios based on coded variables from NHTSA's nationally representative crash databases in the United States. Using 4 databases (National Automotive Sampling System-General Estimates System [NASS-GES], NASS Crashworthiness Data System [NASS-CDS], Fatality Analysis Reporting System [FARS], and National Motor Vehicle Crash Causation Survey [NMVCCS]) the scenarios developed in this study can be used to quantify the number of police-reported crashes, seriously injured occupants, and fatalities that are applicable to proposed active safety systems. In this article, we use the precrash scenarios to identify the target populations for FCW, pedestrian crash avoidance systems (PCAS), lane departure warning (LDW), and vehicle-to-vehicle (V2V) or vehicle-to-infrastructure (V2I) systems. Crash scenarios were derived using precrash variables (critical event, accident type, precrash movement) present in all 4 data sources. This study found that these active safety systems could potentially mitigate approximately 1 in 5 of all severity and serious injury crashes in the United States and 26 percent of fatal crashes. Annually, this corresponds to 1.2 million all severity, 14,353 serious injury (MAIS 3+), and 7412 fatal crashes. In addition, we provide the source code for the crash scenarios as an appendix (see online supplement) to this article so that researchers can use the crash scenarios in future research.

Current knowledge of US metal and nonmetal miner health: Current and potential data sources for analysis of miner health status

PubMed Central

Yeoman, K. M.; Halldin, C. N.; Wood, J.; Storey, E.; Johns, D.; Laney, A. S.

2016-01-01

ABSTRACT Little is known about the current health status of US metal and nonmetal (MNM) miners, in part because no health surveillance systems exist for this population. The National Institute for Occupational Safety and Health (NIOSH) is developing a program to characterize burden of disease among MNM miners. This report discusses current knowledge and potential data sources of MNM miner health. Recent national surveys were analyzed, and literature specific to MNM miner health status was reviewed. No robust estimates of disease prevalence were identified, and national surveys did not provide information specific to MNM miners. Because substantial gaps exist in the understanding of MNM miners' current health status, NIOSH plans to develop a health surveillance program for this population to guide intervention efforts to reduce occupational and personal risks for chronic illness. PMID:25658684

Hyperspectral reflectance and fluorescence line-scan imaging system for online detection of fecal contamination on apples

NASA Astrophysics Data System (ADS)

Kim, Moon S.; Cho, Byoung-Kwan; Yang, Chun-Chieh; Chao, Kaunglin; Lefcourt, Alan M.; Chen, Yud-Ren

2006-10-01

We have developed nondestructive opto-electronic imaging techniques for rapid assessment of safety and wholesomeness of foods. A recently developed fast hyperspectral line-scan imaging system integrated with a commercial apple-sorting machine was evaluated for rapid detection of animal feces matter on apples. Apples obtained from a local orchard were artificially contaminated with cow feces. For the online trial, hyperspectral images with 60 spectral channels, reflectance in the visible to near infrared regions and fluorescence emissions with UV-A excitation, were acquired from apples moving at a processing sorting-line speed of three apples per second. Reflectance and fluorescence imaging required a passive light source, and each method used independent continuous wave (CW) light sources. In this paper, integration of the hyperspectral imaging system with the commercial applesorting machine and preliminary results for detection of fecal contamination on apples, mainly based on the fluorescence method, are presented.

Shielding calculation and criticality safety analysis of spent fuel transportation cask in research reactors.

PubMed

Mohammadi, A; Hassanzadeh, M; Gharib, M

2016-02-01

In this study, shielding calculation and criticality safety analysis were carried out for general material testing reactor (MTR) research reactors interim storage and relevant transportation cask. During these processes, three major terms were considered: source term, shielding, and criticality calculations. The Monte Carlo transport code MCNP5 was used for shielding calculation and criticality safety analysis and ORIGEN2.1 code for source term calculation. According to the results obtained, a cylindrical cask with body, top, and bottom thicknesses of 18, 13, and 13 cm, respectively, was accepted as the dual-purpose cask. Furthermore, it is shown that the total dose rates are below the normal transport criteria that meet the standards specified. Copyright © 2015 Elsevier Ltd. All rights reserved.

Promotion of a healthy work life at small enterprises in Thailand by participatory methods.

PubMed

Krungkraiwong, Sudthida; Itani, Toru; Amornratanapaichit, Ratanaporn

2006-01-01

The major problems of small enterprises include unfavourable working conditions and environment that affect safety and health of workers. The WISE (Work Improvement in Small Enterprises) methodology developed by the ILO has been widely applied to improve occupational safety and health in small enterprises in Thailand. The participatory methods building on local good practices and focusing on practicable improvements have proven effective in controlling the occupational hazards in these enterprises at their sources. As a result of applying the methods in small-scale industries, the frequency of occupational accidents was reduced and the working environment actually improved in the cases studied. The results prove that the participatory approach taken by the WISE activities is a useful and effective tool to make owner/managers and workers in small enterprises voluntarily improve their own working conditions and environment. In promoting a healthy work life at small enterprises in Thailand, it is important to further develop and spread the approach.

The Image Gently pediatric digital radiography safety checklist: tools for improving pediatric radiography.

PubMed

John, Susan D; Moore, Quentin T; Herrmann, Tracy; Don, Steven; Powers, Kevin; Smith, Susan N; Morrison, Greg; Charkot, Ellen; Mills, Thalia T; Rutz, Lois; Goske, Marilyn J

2013-10-01

Transition from film-screen to digital radiography requires changes in radiographic technique and workflow processes to ensure that the minimum radiation exposure is used while maintaining diagnostic image quality. Checklists have been demonstrated to be useful tools for decreasing errors and improving safety in several areas, including commercial aviation and surgical procedures. The Image Gently campaign, through a competitive grant from the FDA, developed a checklist for technologists to use during the performance of digital radiography in pediatric patients. The checklist outlines the critical steps in digital radiography workflow, with an emphasis on steps that affect radiation exposure and image quality. The checklist and its accompanying implementation manual and practice quality improvement project are open source and downloadable at www.imagegently.org. The authors describe the process of developing and testing the checklist and offer suggestions for using the checklist to minimize radiation exposure to children during radiography. Copyright © 2013 American College of Radiology. All rights reserved.

Advanced medical imaging protocol workflow-a flexible electronic solution to optimize process efficiency, care quality and patient safety in the National VA Enterprise.

PubMed

Medverd, Jonathan R; Cross, Nathan M; Font, Frank; Casertano, Andrew

2013-08-01

Radiologists routinely make decisions with only limited information when assigning protocol instructions for the performance of advanced medical imaging examinations. Opportunity exists to simultaneously improve the safety, quality and efficiency of this workflow through the application of an electronic solution leveraging health system resources to provide concise, tailored information and decision support in real-time. Such a system has been developed using an open source, open standards design for use within the Veterans Health Administration. The Radiology Protocol Tool Recorder (RAPTOR) project identified key process attributes as well as inherent weaknesses of paper processes and electronic emulators of paper processes to guide the development of its optimized electronic solution. The design provides a kernel that can be expanded to create an integrated radiology environment. RAPTOR has implications relevant to the greater health care community, and serves as a case model for modernization of legacy government health information systems.

Implementing Software Safety in the NASA Environment

NASA Technical Reports Server (NTRS)

Wetherholt, Martha S.; Radley, Charles F.

1994-01-01

Until recently, NASA did not consider allowing computers total control of flight systems. Human operators, via hardware, have constituted the ultimate safety control. In an attempt to reduce costs, NASA has come to rely more and more heavily on computers and software to control space missions. (For example. software is now planned to control most of the operational functions of the International Space Station.) Thus the need for systematic software safety programs has become crucial for mission success. Concurrent engineering principles dictate that safety should be designed into software up front, not tested into the software after the fact. 'Cost of Quality' studies have statistics and metrics to prove the value of building quality and safety into the development cycle. Unfortunately, most software engineers are not familiar with designing for safety, and most safety engineers are not software experts. Software written to specifications which have not been safety analyzed is a major source of computer related accidents. Safer software is achieved step by step throughout the system and software life cycle. It is a process that includes requirements definition, hazard analyses, formal software inspections, safety analyses, testing, and maintenance. The greatest emphasis is placed on clearly and completely defining system and software requirements, including safety and reliability requirements. Unfortunately, development and review of requirements are the weakest link in the process. While some of the more academic methods, e.g. mathematical models, may help bring about safer software, this paper proposes the use of currently approved software methodologies, and sound software and assurance practices to show how, to a large degree, safety can be designed into software from the start. NASA's approach today is to first conduct a preliminary system hazard analysis (PHA) during the concept and planning phase of a project. This determines the overall hazard potential of the system to be built. Shortly thereafter, as the system requirements are being defined, the second iteration of hazard analyses takes place, the systems hazard analysis (SHA). During the systems requirements phase, decisions are made as to what functions of the system will be the responsibility of software. This is the most critical time to affect the safety of the software. From this point, software safety analyses as well as software engineering practices are the main focus for assuring safe software. While many of the steps proposed in this paper seem like just sound engineering practices, they are the best technical and most cost effective means to assure safe software within a safe system.

Development of a stationary chest tomosynthesis system using carbon nanotube x-ray source array

NASA Astrophysics Data System (ADS)

Shan, Jing

X-ray imaging system has shown its usefulness for providing quick and easy access of imaging in both clinic settings and emergency situations. It greatly improves the workflow in hospitals. However, the conventional radiography systems, lacks 3D information in the images. The tissue overlapping issue in the 2D projection image result in low sensitivity and specificity. Both computed tomography and digital tomosynthesis, the two conventional 3D imaging modalities, requires a complex gantry to mechanically translate the x-ray source to various positions. Over the past decade, our research group has developed a carbon nanotube (CNT) based x-ray source technology. The CNT x-ray sources allows compacting multiple x-ray sources into a single x-ray tube. Each individual x-ray source in the source array can be electronically switched. This technology allows development of stationary tomographic imaging modalities without any complex mechanical gantries. The goal of this work is to develop a stationary digital chest tomosynthesis (s-DCT) system, and implement it for a clinical trial. The feasibility of s-DCT was investigated. It is found that the CNT source array can provide sufficient x-ray output for chest imaging. Phantom images have shown comparable image qualities as conventional DCT. The s-DBT system was then used to study the effects of source array configurations and tomosynthesis image quality, and the feasibility of a physiological gated s-DCT. Using physical measures for spatial resolution, the 2D source configuration was shown to have improved depth resolution and comparable in-plane resolution. The prospective gated tomosynthesis images have shown substantially reduction of image blur associated with lung motions. The system was also used to investigate the feasibility of using s-DCT as a diagnosis and monitoring tools for cystic fibrosis patients. A new scatter reduction methods for s-DCT was also studied. Finally, a s-DCT system was constructed by retrofitting the source array to a Carestream digital radiography system. The system passed the electrical and radiation safety tests, and was installed in Marsico Hall. The patient trial started in March of 2015, and the first patient was successfully imaged.

The "is" and the "ought": How do perceived social norms influence safety behaviors at work?

PubMed

Fugas, Carla S; Meliá, José L; Silva, Silvia A

2011-01-01

Despite a widespread view that social norms have an important contextual influence on health attitudes and behaviors, the impact of normative influences on safety behaviors has received very little attention. The current study proposes that supervisors' and coworkers' descriptive and injunctive safety norms influence proactive and compliance safety behaviors. Longitudinal results from 132 workers in a passenger transportation company support the link between coworkers' descriptive safety norms (at Time 1) and proactive safety practices (at Time 2). Crystallization of supervisor' injunctive safety norms (at Time 2) moderated the effect of coworkers' descriptive safety norms (at Time 1) on self-reported proactive safety behavior (at Time 2). These findings emphasize the differences between supervisors' and coworkers' descriptive and injunctive norms as sources of social influence on compliance and proactive safety behavior.

Increasing teen safety belt use: a program and literature review.

DOT National Transportation Integrated Search

2005-09-01

A comprehensive review of the scientific literature, State and Federal Government reports, and other sources of information : was conducted to determine the magnitude of the problem of teen safety belt use and to identify and summarize programs, : in...

App-based crowd sourcing of bicycle and pedestrian conflict data : final report.

DOT National Transportation Integrated Search

2017-01-15

Most agencies and decision-makers rely on crash and crash severity (property damage only, injury or fatality) data : to assess transportation safety; however, in the context of public health where perceptions of safety may influence : the willingness...

10 CFR 39.43 - Inspection, maintenance, and opening of a source or source holder.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Inspection, maintenance, and opening of a source or source holder. 39.43 Section 39.43 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY..., for defects before each use to ensure that the equipment is in good working condition and that...

10 CFR 39.43 - Inspection, maintenance, and opening of a source or source holder.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Inspection, maintenance, and opening of a source or source holder. 39.43 Section 39.43 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY..., for defects before each use to ensure that the equipment is in good working condition and that...

10 CFR 39.43 - Inspection, maintenance, and opening of a source or source holder.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Inspection, maintenance, and opening of a source or source holder. 39.43 Section 39.43 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY..., for defects before each use to ensure that the equipment is in good working condition and that...

10 CFR 39.43 - Inspection, maintenance, and opening of a source or source holder.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Inspection, maintenance, and opening of a source or source holder. 39.43 Section 39.43 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY..., for defects before each use to ensure that the equipment is in good working condition and that...

10 CFR 39.43 - Inspection, maintenance, and opening of a source or source holder.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Inspection, maintenance, and opening of a source or source holder. 39.43 Section 39.43 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY..., for defects before each use to ensure that the equipment is in good working condition and that...

Harnessing scientific literature reports for pharmacovigilance. Prototype software analytical tool development and usability testing.

PubMed

Sorbello, Alfred; Ripple, Anna; Tonning, Joseph; Munoz, Monica; Hasan, Rashedul; Ly, Thomas; Francis, Henry; Bodenreider, Olivier

2017-03-22

We seek to develop a prototype software analytical tool to augment FDA regulatory reviewers' capacity to harness scientific literature reports in PubMed/MEDLINE for pharmacovigilance and adverse drug event (ADE) safety signal detection. We also aim to gather feedback through usability testing to assess design, performance, and user satisfaction with the tool. A prototype, open source, web-based, software analytical tool generated statistical disproportionality data mining signal scores and dynamic visual analytics for ADE safety signal detection and management. We leveraged Medical Subject Heading (MeSH) indexing terms assigned to published citations in PubMed/MEDLINE to generate candidate drug-adverse event pairs for quantitative data mining. Six FDA regulatory reviewers participated in usability testing by employing the tool as part of their ongoing real-life pharmacovigilance activities to provide subjective feedback on its practical impact, added value, and fitness for use. All usability test participants cited the tool's ease of learning, ease of use, and generation of quantitative ADE safety signals, some of which corresponded to known established adverse drug reactions. Potential concerns included the comparability of the tool's automated literature search relative to a manual 'all fields' PubMed search, missing drugs and adverse event terms, interpretation of signal scores, and integration with existing computer-based analytical tools. Usability testing demonstrated that this novel tool can automate the detection of ADE safety signals from published literature reports. Various mitigation strategies are described to foster improvements in design, productivity, and end user satisfaction.

Lithium-Ion Batteries for Aerospace Applications

NASA Technical Reports Server (NTRS)

Surampudi, S.; Halpert, G.; Marsh, R. A.; James, R.

1999-01-01

This presentation reviews: (1) the goals and objectives, (2) the NASA and Airforce requirements, (3) the potential near term missions, (4) management approach, (5) the technical approach and (6) the program road map. The objectives of the program include: (1) develop high specific energy and long life lithium ion cells and smart batteries for aerospace and defense applications, (2) establish domestic production sources, and to demonstrate technological readiness for various missions. The management approach is to encourage the teaming of universities, R&D organizations, and battery manufacturing companies, to build on existing commercial and government technology, and to develop two sources for manufacturing cells and batteries. The technological approach includes: (1) develop advanced electrode materials and electrolytes to achieve improved low temperature performance and long cycle life, (2) optimize cell design to improve specific energy, cycle life and safety, (3) establish manufacturing processes to ensure predictable performance, (4) establish manufacturing processes to ensure predictable performance, (5) develop aerospace lithium ion cells in various AH sizes and voltages, (6) develop electronics for smart battery management, (7) develop a performance database required for various applications, and (8) demonstrate technology readiness for the various missions. Charts which review the requirements for the Li-ion battery development program are presented.

Empirical research on the influencing factors of the occupational stress for construction workers

NASA Astrophysics Data System (ADS)

LV, Xing; WU, Xiang; CI, Huipeng; LIU, Qing; YAO, Yongzheng

2017-04-01

Employee’s occupational stress and safety performance are highly related, which has been generally recognized by the researchers. We did this research to understand the status of the stress for construction workers, and explore the influence factors of pressure source with characteristics of construction industry. Based on the results of previous studies, we designed questionnaire to collect the influence factors on occupational stressors. The study selected workers from certain construction units at the grass-roots level as sample source. According to the results of the questionnaire, we redesigned the interview outline, and did the semi-structured interviews on workers randomly selected. Finally, we developed a scale which combined the characteristics of construction projects in China. Using SPSS software for factor analysis, reliability analysis, and descriptive statistical analysis, the results show that there are six factors affecting the workers’ occupational stress, including The Work Itself, Family-Work, Career Development, Organization Style, Interpersonal Relationship and Role Management Style. The work itself is the main sources of occupational stress. The results can be used by the construction company to provide guidance for workers to control and manage occupational stress.

Emergency Preparedness technology support to the Health and Safety Executive (HSE), Nuclear Installations Inspectorate (NII) of the United Kingdom. Appendix A

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Kula, K.R.

1994-03-01

The Nuclear Installations Inspectorate (NII) of the United Kingdom (UK) suggested the use of an accident progression logic model method developed by Westinghouse Savannah River Company (WSRC) and Science Applications International Corporation (SAIC) for K Reactor to predict the magnitude and timing of radioactivity releases (the source term) based on an advanced logic model methodology. Predicted releases are output from the personal computer-based model in a level-of-confidence format. Additional technical discussions eventually led to a request from the NII to develop a proposal for assembling a similar technology to predict source terms for the UK`s advanced gas-cooled reactor (AGR) type.more » To respond to this request, WSRC is submitting a proposal to provide contractual assistance as specified in the Scope of Work. The work will produce, document, and transfer technology associated with a Decision-Oriented Source Term Estimator for Emergency Preparedness (DOSE-EP) for the NII to apply to AGRs in the United Kingdom. This document, Appendix A is a part of this proposal.« less

Air Data Report Improves Flight Safety

NASA Technical Reports Server (NTRS)

2007-01-01

NASA's Aviation Safety Program in the NASA Aeronautics Research Mission Directorate, which seeks to make aviation safer by developing tools for flight data analysis and interpretation and then by transferring these tools to the aviation industry, sponsored the development of Morning Report software. The software, created at Ames Research Center with the assistance of the Pacific Northwest National Laboratory, seeks to detect atypicalities without any predefined parameters-it spots deviations and highlights them. In 2004, Sagem Avionics Inc. entered a licensing agreement with NASA for the commercialization of the Morning Report software, and also licensed the NASA Aviation Data Integration System (ADIS) tool, which allows for the integration of data from disparate sources into the flight data analysis process. Sagem Avionics incorporated the Morning Report tool into its AGS product, a comprehensive flight operations monitoring system that helps users detect irregular or divergent practices, technical flaws, and problems that might develop when aircraft operate outside of normal procedures. Sagem developed AGS in collaboration with airlines, so that the system takes into account their technical evolutions and needs, and each airline is able to easily perform specific treatments and to build its own flight data analysis system. Further, the AGS is designed to support any aircraft and flight data recorders.

The First Development of Human Factors Engineering Requirements for Application to Ground Task Design for a NASA Flight Program

NASA Technical Reports Server (NTRS)

Dischinger, H. Charles, Jr.; Stambolian, Damon B.; Miller, Darcy H.

2008-01-01

The National Aeronautics and Space Administration has long applied standards-derived human engineering requirements to the development of hardware and software for use by astronauts while in flight. The most important source of these requirements has been NASA-STD-3000. While there have been several ground systems human engineering requirements documents, none has been applicable to the flight system as handled at NASA's launch facility at Kennedy Space Center. At the time of the development of previous human launch systems, there were other considerations that were deemed more important than developing worksites for ground crews; e.g., hardware development schedule and vehicle performance. However, experience with these systems has shown that failure to design for ground tasks has resulted in launch schedule delays, ground operations that are more costly than they might be, and threats to flight safety. As the Agency begins the development of new systems to return humans to the moon, the new Constellation Program is addressing this issue with a new set of human engineering requirements. Among these requirements is a subset that will apply to the design of the flight components and that is intended to assure ground crew success in vehicle assembly and maintenance tasks. These requirements address worksite design for usability and for ground crew safety.

14 CFR 417.129 - Safety at end of launch.

Code of Federal Regulations, 2013 CFR

2013-01-01

... result from the conversion of energy sources into energy that fragments the vehicle or its components. Energy sources include chemical, pressure, and kinetic energy; and (c) Stored energy is removed by... batteries in a permanent discharge state, and removing any remaining source of stored energy. ...

14 CFR 417.129 - Safety at end of launch.

Code of Federal Regulations, 2012 CFR

2012-01-01

... result from the conversion of energy sources into energy that fragments the vehicle or its components. Energy sources include chemical, pressure, and kinetic energy; and (c) Stored energy is removed by... batteries in a permanent discharge state, and removing any remaining source of stored energy. ...

14 CFR 417.129 - Safety at end of launch.

Code of Federal Regulations, 2011 CFR

2011-01-01

... result from the conversion of energy sources into energy that fragments the vehicle or its components. Energy sources include chemical, pressure, and kinetic energy; and (c) Stored energy is removed by... batteries in a permanent discharge state, and removing any remaining source of stored energy. ...

14 CFR 417.129 - Safety at end of launch.

Code of Federal Regulations, 2014 CFR

2014-01-01

... result from the conversion of energy sources into energy that fragments the vehicle or its components. Energy sources include chemical, pressure, and kinetic energy; and (c) Stored energy is removed by... batteries in a permanent discharge state, and removing any remaining source of stored energy. ...

14 CFR 417.129 - Safety at end of launch.

Code of Federal Regulations, 2010 CFR

2010-01-01

... result from the conversion of energy sources into energy that fragments the vehicle or its components. Energy sources include chemical, pressure, and kinetic energy; and (c) Stored energy is removed by... batteries in a permanent discharge state, and removing any remaining source of stored energy. ...

Managing NIF safety equipment in a high neutron and gamma radiation environment.

PubMed

Datte, Philip; Eckart, Mark; Jackson, Mark; Khater, Hesham; Manuel, Stacie; Newton, Mark

2013-06-01

The National Ignition Facility (NIF) is a 192 laser beam facility that supports the Inertial Confinement Fusion program. During the ignition experimental campaign, the NIF is expected to perform shots with varying fusion yield producing 14 MeV neutrons up to 20 MJ or 7.1 × 10(18) neutrons per shot and a maximum annual yield of 1,200 MJ. Several infrastructure support systems will be exposed to varying high yield shots over the facility's 30-y life span. In response to this potential exposure, analysis and testing of several facility safety systems have been conducted. A detailed MCNP (Monte Carlo N-Particle Transport Code) model has been developed for the NIF facility, and it includes most of the major structures inside the Target Bay. The model has been used in the simulation of expected neutron and gamma fluences throughout the Target Bay. Radiation susceptible components were identified and tested to fluences greater than 10(13) (n cm(-2)) for 14 MeV neutrons and γ-ray equivalent. The testing includes component irradiation using a 60Co gamma source and accelerator-based irradiation using 4- and 14- MeV neutron sources. The subsystem implementation in the facility is based on the fluence estimates after shielding and survivability guidelines derived from the dose maps and component tests results. This paper reports on the evaluation and implementation of mitigations for several infrastructure safety support systems, including video, oxygen monitoring, pressure monitors, water sensing systems, and access control interfaces found at the NIF.

The outcomes of recent patient safety education interventions for trainee physicians and medical students: a systematic review

PubMed Central

Kirkman, Matthew A; Sevdalis, Nick; Arora, Sonal; Baker, Paul; Vincent, Charles; Ahmed, Maria

2015-01-01

Objective To systematically review the latest evidence for patient safety education for physicians in training and medical students, updating, extending and improving on a previous systematic review on this topic. Design A systematic review. Data sources Embase, Ovid Medline and PsycINFO databases. Study selection Studies including an evaluation of patient safety training interventions delivered to trainees/residents and medical students published between January 2009 and May 2014. Data extraction The review was performed using a structured data capture tool. Thematic analysis also identified factors influencing successful implementation of interventions. Results We identified 26 studies reporting patient safety interventions: 11 involving students and 15 involving trainees/residents. Common educational content included a general overview of patient safety, root cause/systems-based analysis, communication and teamwork skills, and quality improvement principles and methodologies. The majority of courses were well received by learners, and improved patient safety knowledge, skills and attitudes. Moreover, some interventions were shown to result in positive behaviours, notably subsequent engagement in quality improvement projects. No studies demonstrated patient benefit. Availability of expert faculty, competing curricular/service demands and institutional culture were important factors affecting implementation. Conclusions There is an increasing trend for developing educational interventions in patient safety delivered to trainees/residents and medical students. However, significant methodological shortcomings remain and additional evidence of impact on patient outcomes is needed. While there is some evidence of enhanced efforts to promote sustainability of such interventions, further work is needed to encourage their wider adoption and spread. PMID:25995240

Final safety analysis report for the Galileo Mission: Volume 2: Book 1, Accident model document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Accident Model Document (AMD) is the second volume of the three volume Final Safety Analysis Report (FSAR) for the Galileo outer planetary space science mission. This mission employs Radioisotope Thermoelectric Generators (RTGs) as the prime electrical power sources for the spacecraft. Galileo will be launched into Earth orbit using the Space Shuttle and will use the Inertial Upper Stage (IUS) booster to place the spacecraft into an Earth escape trajectory. The RTG's employ silicon-germanium thermoelectric couples to produce electricity from the heat energy that results from the decay of the radioisotope fuel, Plutonium-238, used in the RTG heat source.more » The heat source configuration used in the RTG's is termed General Purpose Heat Source (GPHS), and the RTG's are designated GPHS-RTGs. The use of radioactive material in these missions necessitates evaluations of the radiological risks that may be encountered by launch complex personnel as well as by the Earth's general population resulting from postulated malfunctions or failures occurring in the mission operations. The FSAR presents the results of a rigorous safety assessment, including substantial analyses and testing, of the launch and deployment of the RTGs for the Galileo mission. This AMD is a summary of the potential accident and failure sequences which might result in fuel release, the analysis and testing methods employed, and the predicted source terms. Each source term consists of a quantity of fuel released, the location of release and the physical characteristics of the fuel released. Each source term has an associated probability of occurrence. 27 figs., 11 tabs.« less

Modeling nutrient sources, transport and management strategies in a coastal watershed, Southeast China.

PubMed

Zhou, Pei; Huang, Jinliang; Hong, Huasheng

2018-01-01

Integrated watershed management requires an analytical model capable of revealing the full range of impacts that would be caused by the uses and developments in the watershed. The SPAtially Referenced Regressions On Watershed Attributes (SPARROW) model was developed in this study to provide empirical estimates of the sources, transport of total nitrogen (TN) and total phosphorus (TP) and to develop nutrient management strategies in the Jiulong River Watershed, southeast China that has enormous influence on the region's ecological safety. We calibrated the model using data related to daily streamflow, monthly TN and TP concentrations in 2014 at 30 locations. The model produced R 2 values for TN with 0.95 and TP with 0.94. It was found that for the entire watershed, TN came from fertilizer application (43%), livestock breeding (39%) and sewage discharge (18%), while TP came from livestock breeding (46%), fertilizer application (46%), and industrial discharge (8%). Fifty-eight percent of the TN and 80% of the TP in upstream reaches are delivered to the outlets of North and West rivers. A scenario analysis with SPARROW was coupled to develop suitable management strategies. Results revealed that controlling nutrient sources was effective in improving water quality. Normally sharp reduction in nutrient sources is not operational feasible. Hence, it is recommended that preventing nutrient on land from entering into the river as a suitable strategy in watershed management. Copyright © 2017 Elsevier B.V. All rights reserved.

Narrative review of the UK Patient Safety Research Portfolio.

PubMed

Waring, Justin; Rowley, Emma; Dingwall, Robert; Palmer, Cecily; Murcott, Toby

2010-01-01

The UK Patient Safety Research Portfolio (PSRP) commissioned 38 studies investigating the threats to patient safety in various clinical settings and evaluating safety-related service interventions. This paper reviews 27 of these studies, drawing out emergent and cross-cutting themes in terms of theory, research methods and thematic findings. Given the diversity of PSRP studies, the paper takes a narrative approach that allows for qualitative description, interpretation and synthesis of the studies and their findings. The theoretical review shows the majority of PSRP studies draw upon a patient safety 'orthodoxy', developed from the concepts and models associated with the human factors approach. The methodological review shows that a diverse range of research designs and techniques have been utilized. Although many follow in the 'scientific' tradition, interpretative, mixed and innovative methods have been integral to research. The thematic review of findings highlights significant contributions to knowledge in the areas of 'people', 'organizations', and 'technology'. As well as identifying the various sources of risk in the organization and delivery of patient care, the studies also evaluate and make recommendations about service change and improvement. The PSRP has provided the foundations for significant theoretical, methodological and empirical advances in the area of patient safety. The findings and recommendations make important contributions to policy formulation and implementation as well as professional and managerial practice. Through this body of research the PSRP has supported the formation and growth of a thriving research community across academic, policy and professional communities.

Traceability from a US perspective.

PubMed

Smith, G C; Tatum, J D; Belk, K E; Scanga, J A; Grandin, T; Sofos, J N

2005-09-01

Traceability of a food consists of development of "an information trail that follows the food product's physical trail". Internationally, the US is lagging behind many countries in developing traceability systems for food in general and especially for livestock, poultry and their products. The US food industry is developing, implementing and maintaining traceability systems designed to improve food supply management, facilitate traceback for food safety and quality, and differentiate and market foods with subtle or undetectable quality attributes. Traceability, for livestock, poultry and meat, in its broadest context, can, could, or will eventually be used: (1) to ascertain origin and ownership, and to deter theft and misrepresentation, of animals and meat; (2) for surveillance, control and eradication of foreign animal diseases; (3) for biosecurity protection of the national livestock population; (4) for compliance with requirements of international customers; (5) for compliance with country-of-origin labeling requirements; (6) for improvement of supply-side management, distribution/delivery systems and inventory controls; (7) to facilitate value-based marketing; (8) to facilitate value-added marketing; (9) to isolate the source and extent of quality-control and food-safety problems; and (10) to minimize product recalls and make crisis management protocols more effective. Domestically and internationally, it has now become essential that producers, packers, processors, wholesalers, exporters and retailers assure that livestock, poultry and meat are identified, that record-keeping assures traceability through all or parts of the complete life-cycle, and that, in some cases, the source, the production-practices and/or the process of generating final products, can be verified. At issue, as the US develops traceback capabilities, will be the breadth, depth and precision of its specific traceability systems.

Safety testing of monoclonal antibodies in non-human primates: Case studies highlighting their impact on human risk assessment.

PubMed

Brennan, Frank R; Cavagnaro, Joy; McKeever, Kathleen; Ryan, Patricia C; Schutten, Melissa M; Vahle, John; Weinbauer, Gerhard F; Marrer-Berger, Estelle; Black, Lauren E

2018-01-01

Monoclonal antibodies (mAbs) are improving the quality of life for patients suffering from serious diseases due to their high specificity for their target and low potential for off-target toxicity. The toxicity of mAbs is primarily driven by their pharmacological activity, and therefore safety testing of these drugs prior to clinical testing is performed in species in which the mAb binds and engages the target to a similar extent to that anticipated in humans. For highly human-specific mAbs, this testing often requires the use of non-human primates (NHPs) as relevant species. It has been argued that the value of these NHP studies is limited because most of the adverse events can be predicted from the knowledge of the target, data from transgenic rodents or target-deficient humans, and other sources. However, many of the mAbs currently in development target novel pathways and may comprise novel scaffolds with multi-functional domains; hence, the pharmacological effects and potential safety risks are less predictable. Here, we present a total of 18 case studies, including some of these novel mAbs, with the aim of interrogating the value of NHP safety studies in human risk assessment. These studies have identified mAb candidate molecules and pharmacological pathways with severe safety risks, leading to candidate or target program termination, as well as highlighting that some pathways with theoretical safety concerns are amenable to safe modulation by mAbs. NHP studies have also informed the rational design of safer drug candidates suitable for human testing and informed human clinical trial design (route, dose and regimen, patient inclusion and exclusion criteria and safety monitoring), further protecting the safety of clinical trial participants.

Proposing a tornado watch scale

NASA Astrophysics Data System (ADS)

Mason, Jonathan Brock

This thesis provides an overview of language used in tornado safety recommendations from various sources, along with developing a rubric for scaled tornado safety recommendations, and subsequent development and testing of a tornado watch scale. The rubric is used to evaluate tornado refuge/shelter adequacy responses of Tuscaloosa residents gathered following the April 27, 2011 Tuscaloosa, Alabama EF4 tornado. There was a significant difference in the counts of refuge adequacy for Tuscaloosa residents when holding the locations during the April 27th tornado constant and comparing adequacy ratings for weak (EF0-EF1), strong (EF2-EF3) and violent (EF4-EF5) tornadoes. There was also a significant difference when comparing future tornado refuge plans of those same participants to the adequacy ratings for weak, strong and violent tornadoes. The tornado refuge rubric is then revised into a six-class, hierarchical Tornado Watch Scale (TWS) from Level 0 to Level 5 based on the likelihood of high-impact or low-impact severe weather events containing weak, strong or violent tornadoes. These levels represent maximum expected tornado intensity and include tornado safety recommendations from the tornado refuge rubric. Audio recordings similar to those used in current National Oceanic and Atmospheric Administration (NOAA) weather radio communications were developed to correspond to three levels of the TWS, a current Storm Prediction Center (SPC) tornado watch and a particularly dangerous situation (PDS) tornado watch. These were then used in interviews of Alabama residents to determine how changes to the information contained in the watch statements would affect each participant's tornado safety actions and perception of event danger. Results from interview participants (n=38) indicate a strong preference (97.37%) for the TWS when compared to current tornado watch and PDS tornado watch statements. Results also show the TWS elicits more adequate safety decisions from participants along with a more appropriate perception of the danger being conveyed by each statement.

Simulation of the alpha particle heating and the helium ash source in an International Thermonuclear Experimental Reactor-like tokamak with an internal transport barrier

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ye, Lei, E-mail: lye@ipp.ac.cn; Guo, Wenfeng; Xiao, Xiaotao

2014-12-15

A guiding center orbit following code, which incorporates a set of non-singular coordinates for orbit integration, was developed and applied to investigate the alpha particle heating in an ITER-like tokamak with an internal transport barrier. It is found that a relatively large q (safety factor) value can significantly broaden the alpha heating profile in comparison with the local heating approximation; this broadening is due to the finite orbit width effects; when the orbit width is much smaller than the scale length of the alpha particle source profile, the heating profile agrees with the source profile, otherwise, the heating profile canmore » be significantly broadened. It is also found that the stagnation particles move to the magnetic axis during the slowing-down process, thus the effect of stagnation orbits is not beneficial to the helium ash removal. The source profile of helium ash is broadened in comparison with the alpha source profile, which is similar to the heating profile.« less

Assessing the microbial quality of improved drinking water sources: results from the Dominican Republic.

PubMed

Baum, Rachel; Kayser, Georgia; Stauber, Christine; Sobsey, Mark

2014-01-01

Millennium Development Goal Target 7c (to halve between 1990 and 2015 the proportion of the global population without sustainable access to safe drinking water), was celebrated as achieved in 2012. However, new studies show that we may be prematurely celebrating. Access to safe drinking water may be overestimated if microbial water quality is considered. The objective of this study was to examine the relationship between microbial drinking water quality and drinking water source in the Puerto Plata region of the Dominican Republic. This study analyzed microbial drinking water quality data from 409 households in 33 communities. Results showed that 47% of improved drinking water sources were of high to very-high risk water quality, and therefore unsafe for drinking. This study provides evidence that the current estimate of safe water access may be overly optimistic, and microbial water quality data are needed to reliably assess the safety of drinking water.

Assessing the Microbial Quality of Improved Drinking Water Sources: Results from the Dominican Republic

PubMed Central

Baum, Rachel; Kayser, Georgia; Stauber, Christine; Sobsey, Mark

2014-01-01

Millennium Development Goal Target 7c (to halve between 1990 and 2015 the proportion of the global population without sustainable access to safe drinking water), was celebrated as achieved in 2012. However, new studies show that we may be prematurely celebrating. Access to safe drinking water may be overestimated if microbial water quality is considered. The objective of this study was to examine the relationship between microbial drinking water quality and drinking water source in the Puerto Plata region of the Dominican Republic. This study analyzed microbial drinking water quality data from 409 households in 33 communities. Results showed that 47% of improved drinking water sources were of high to very-high risk water quality, and therefore unsafe for drinking. This study provides evidence that the current estimate of safe water access may be overly optimistic, and microbial water quality data are needed to reliably assess the safety of drinking water. PMID:24218411

The role of food quality assurance and product certification systems on marketing aspects

NASA Astrophysics Data System (ADS)

Petrović, Z.; Milićević, D.; Nastasijević, I.; Đorđević, V.; Trbović, D.; Velebit, B.

2017-09-01

The level of quality that a product offers to consumers is a fundamental aspect of competition in many markets. Consumers’ confidence in the safety and quality of foods they buy and consume is a significant support to the economic development of production organizations of this type, and therefore the overall economic development. Consumer concerns about food safety as well as the globalization of food production have also led to the existence of a global internationally linked food production and distribution system. The necessity demanded by the consumer population to provide safe food with consistent quality at an attractive price imposes a choice of an appropriate quality assurance model in accordance with the specific properties of the product and the production processes. Modern trends, especially for the last ten years in quality assurance within specific production, such as the food industry, have marked the trend of hyperproduction and a number of production and safety standards, as well as a change of approach in the certification process of organizations according to one or more standards. This can be an additional source of costs for organizations, and can burden the food business operator`s budget in order to ensure their consistent application and maintenance. Quality assurance (QA) standards are considered to be a proven mechanism for delivering quality of product.

Development of a Quality and Safety Competency Curriculum for Radiation Oncology Residency: An International Delphi Study.

PubMed

Adleman, Jenna; Gillan, Caitlin; Caissie, Amanda; Davis, Carol-Anne; Liszewski, Brian; McNiven, Andrea; Giuliani, Meredith

2017-06-01

To develop an entry-to-practice quality and safety competency profile for radiation oncology residency. A comprehensive list of potential quality and safety competency items was generated from public and professional resources and interprofessional focus groups. Redundant or out-of-scope items were eliminated through investigator consensus. Remaining items were subjected to an international 2-round modified Delphi process involving experts in radiation oncology, radiation therapy, and medical physics. During Round 1, each item was scored independently on a 9-point Likert scale indicating appropriateness for inclusion in the competency profile. Items indistinctly ranked for inclusion or exclusion were re-evaluated through web conference discussion and reranked in Round 2. An initial 1211 items were compiled from 32 international sources and distilled to 105 unique potential quality and safety competency items. Fifteen of the 50 invited experts participated in round 1: 10 radiation oncologists, 4 radiation therapists, and 1 medical physicist from 13 centers in 5 countries. Round 1 rankings resulted in 80 items included, 1 item excluded, and 24 items indeterminate. Two areas emerged more prominently within the latter group: change management and human factors. Web conference with 5 participants resulted in 9 of these 24 items edited for content or clarity. In Round 2, 12 participants rescored all indeterminate items resulting in 10 items ranked for inclusion. The final 90 enabling competency items were organized into thematic groups consisting of 18 key competencies under headings adapted from Deming's System of Profound Knowledge. This quality and safety competency profile may inform minimum training standards for radiation oncology residency programs. Copyright © 2017 Elsevier Inc. All rights reserved.

Development of a Quality and Safety Competency Curriculum for Radiation Oncology Residency: An International Delphi Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adleman, Jenna; Gillan, Caitlin; Radiation Medicine Program, Princess Margaret Cancer Centre, Toronto, Ontario

Purpose: To develop an entry-to-practice quality and safety competency profile for radiation oncology residency. Methods and Materials: A comprehensive list of potential quality and safety competency items was generated from public and professional resources and interprofessional focus groups. Redundant or out-of-scope items were eliminated through investigator consensus. Remaining items were subjected to an international 2-round modified Delphi process involving experts in radiation oncology, radiation therapy, and medical physics. During Round 1, each item was scored independently on a 9-point Likert scale indicating appropriateness for inclusion in the competency profile. Items indistinctly ranked for inclusion or exclusion were re-evaluated through webmore » conference discussion and reranked in Round 2. Results: An initial 1211 items were compiled from 32 international sources and distilled to 105 unique potential quality and safety competency items. Fifteen of the 50 invited experts participated in round 1: 10 radiation oncologists, 4 radiation therapists, and 1 medical physicist from 13 centers in 5 countries. Round 1 rankings resulted in 80 items included, 1 item excluded, and 24 items indeterminate. Two areas emerged more prominently within the latter group: change management and human factors. Web conference with 5 participants resulted in 9 of these 24 items edited for content or clarity. In Round 2, 12 participants rescored all indeterminate items resulting in 10 items ranked for inclusion. The final 90 enabling competency items were organized into thematic groups consisting of 18 key competencies under headings adapted from Deming's System of Profound Knowledge. Conclusions: This quality and safety competency profile may inform minimum training standards for radiation oncology residency programs.« less

A survey of quality assurance practices in biomedical open source software projects.

PubMed

Koru, Günes; El Emam, Khaled; Neisa, Angelica; Umarji, Medha

2007-05-07

Open source (OS) software is continuously gaining recognition and use in the biomedical domain, for example, in health informatics and bioinformatics. Given the mission critical nature of applications in this domain and their potential impact on patient safety, it is important to understand to what degree and how effectively biomedical OS developers perform standard quality assurance (QA) activities such as peer reviews and testing. This would allow the users of biomedical OS software to better understand the quality risks, if any, and the developers to identify process improvement opportunities to produce higher quality software. A survey of developers working on biomedical OS projects was conducted to examine the QA activities that are performed. We took a descriptive approach to summarize the implementation of QA activities and then examined some of the factors that may be related to the implementation of such practices. Our descriptive results show that 63% (95% CI, 54-72) of projects did not include peer reviews in their development process, while 82% (95% CI, 75-89) did include testing. Approximately 74% (95% CI, 67-81) of developers did not have a background in computing, 80% (95% CI, 74-87) were paid for their contributions to the project, and 52% (95% CI, 43-60) had PhDs. A multivariate logistic regression model to predict the implementation of peer reviews was not significant (likelihood ratio test = 16.86, 9 df, P = .051) and neither was a model to predict the implementation of testing (likelihood ratio test = 3.34, 9 df, P = .95). Less attention is paid to peer review than testing. However, the former is a complementary, and necessary, QA practice rather than an alternative. Therefore, one can argue that there are quality risks, at least at this point in time, in transitioning biomedical OS software into any critical settings that may have operational, financial, or safety implications. Developers of biomedical OS applications should invest more effort in implementing systemic peer review practices throughout the development and maintenance processes.

[Offshore substation workers' exposure to harmful factors - Actions minimizing risk of hazards].

PubMed

Piotrowski, Paweł Janusz; Robak, Sylwester; Polewaczyk, Mateusz Maksymilian; Raczkowski, Robert

2016-01-01

The current development of electric power industry in Poland, especially in the field of renewable energy sources, including wind power, brings about the need to introduce legislation on new work environment. The development of occupational safety and health (OSH) regulations that must be met by new workplaces, such as offshore substations becomes necessary in view of the construction of modern offshore wind power plants - offshore wind farms. Staying on offshore substation is associated with an increased exposure to harmful health factors: physical, chemical, biological and psychophysical. The main sources of health risks on offshore substations are: temperature, electromagnetic field, noise from operating wind turbines, direct and alternating current, chemicals, Legionella bacteria and social isolation of people. The aim of this article is to draw attention to the problem of offshore substation workers' exposure to harmful factors and to present methods of preventing and reducing the risk-related adverse health effects. In this paper, there are identified and described risks occurring on offshore substations (fire, explosion, lightning, accidents at work). Some examples of the means and the methods for reducing the negative impact of exposure on the human health are presented and discussed. The article also highlights the need to develop appropriate laws and health and safety regulations concerning the new working environment at the offshore substations. The review of researches and international standards shows that some of them can be introduced into the Polish labor market. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

10 CFR 34.46 - Supervision of radiographers' assistants.

Code of Federal Regulations, 2013 CFR

2013-01-01

....46 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.46 Supervision of... equipment or sealed sources or conducts radiation surveys required by § 34.49(b) to determine that the...

10 CFR 34.46 - Supervision of radiographers' assistants.

Code of Federal Regulations, 2012 CFR

2012-01-01

....46 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.46 Supervision of... equipment or sealed sources or conducts radiation surveys required by § 34.49(b) to determine that the...

10 CFR 34.46 - Supervision of radiographers' assistants.

Code of Federal Regulations, 2010 CFR

2010-01-01

....46 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.46 Supervision of... equipment or sealed sources or conducts radiation surveys required by § 34.49(b) to determine that the...

10 CFR 34.46 - Supervision of radiographers' assistants.

Code of Federal Regulations, 2011 CFR

2011-01-01

....46 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.46 Supervision of... equipment or sealed sources or conducts radiation surveys required by § 34.49(b) to determine that the...

10 CFR 34.46 - Supervision of radiographers' assistants.

Code of Federal Regulations, 2014 CFR

2014-01-01

....46 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Radiation Safety Requirements § 34.46 Supervision of... equipment or sealed sources or conducts radiation surveys required by § 34.49(b) to determine that the...

Evolution of International Space Station Program Safety Review Processes and Tools

NASA Technical Reports Server (NTRS)

Ratterman, Christian D.; Green, Collin; Guibert, Matt R.; McCracken, Kristle I.; Sang, Anthony C.; Sharpe, Matthew D.; Tollinger, Irene V.

2013-01-01

The International Space Station Program at NASA is constantly seeking to improve the processes and systems that support safe space operations. To that end, the ISS Program decided to upgrade their Safety and Hazard data systems with 3 goals: make safety and hazard data more accessible; better support the interconnection of different types of safety data; and increase the efficiency (and compliance) of safety-related processes. These goals are accomplished by moving data into a web-based structured data system that includes strong process support and supports integration with other information systems. Along with the data systems, ISS is evolving its submission requirements and safety process requirements to support the improved model. In contrast to existing operations (where paper processes and electronic file repositories are used for safety data management) the web-based solution provides the program with dramatically faster access to records, the ability to search for and reference specific data within records, reduced workload for hazard updates and approval, and process support including digital signatures and controlled record workflow. In addition, integration with other key data systems provides assistance with assessments of flight readiness, more efficient review and approval of operational controls and better tracking of international safety certifications. This approach will also provide new opportunities to streamline the sharing of data with ISS international partners while maintaining compliance with applicable laws and respecting restrictions on proprietary data. One goal of this paper is to outline the approach taken by the ISS Progrm to determine requirements for the new system and to devise a practical and efficient implementation strategy. From conception through implementation, ISS and NASA partners utilized a user-centered software development approach focused on user research and iterative design methods. The user-centered approach used on the new ISS hazard system utilized focused user research and iterative design methods employed by the Human Computer Interaction Group at NASA Ames Research Center. Particularly, the approach emphasized the reduction of workload associated with document and data management activities so more resources can be allocated to the operational use of data in problem solving, safety analysis, and recurrence control. The methods and techniques used to understand existing processes and systems, to recognize opportunities for improvement, and to design and review improvements are described with the intent that similar techniques can be employed elsewhere in safety operations. A second goal of this paper is to provide and overview of the web-based data system implemented by ISS. The software selected for the ISS hazard systemMission Assurance System (MAS)is a NASA-customized vairant of the open source software project Bugzilla. The origin and history of MAS as a NASA software project and the rationale for (and advantages of) using open-source software are documented elsewhere (Green, et al., 2009).

10 CFR 36.31 - Control of source movement.

Code of Federal Regulations, 2014 CFR

2014-01-01

... portable radiation survey meter by a chain or cable. The lock for source control must be designed so that... 10 Energy 1 2014-01-01 2014-01-01 false Control of source movement. 36.31 Section 36.31 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR IRRADIATORS Design and...

10 CFR 36.31 - Control of source movement.

Code of Federal Regulations, 2013 CFR

2013-01-01

... portable radiation survey meter by a chain or cable. The lock for source control must be designed so that... 10 Energy 1 2013-01-01 2013-01-01 false Control of source movement. 36.31 Section 36.31 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR IRRADIATORS Design and...

10 CFR 36.31 - Control of source movement.

Code of Federal Regulations, 2012 CFR

2012-01-01

... portable radiation survey meter by a chain or cable. The lock for source control must be designed so that... 10 Energy 1 2012-01-01 2012-01-01 false Control of source movement. 36.31 Section 36.31 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR IRRADIATORS Design and...

10 CFR 36.31 - Control of source movement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... portable radiation survey meter by a chain or cable. The lock for source control must be designed so that... 10 Energy 1 2010-01-01 2010-01-01 false Control of source movement. 36.31 Section 36.31 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR IRRADIATORS Design and...

10 CFR 36.31 - Control of source movement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... portable radiation survey meter by a chain or cable. The lock for source control must be designed so that... 10 Energy 1 2011-01-01 2011-01-01 false Control of source movement. 36.31 Section 36.31 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR IRRADIATORS Design and...

X-ray source safety shutter

DOEpatents

Robinet, McLouis

1977-05-31

An apparatus is provided for controlling the activation of a high energy radiation source having a shutter. The apparatus includes magnets and magnetically responsive switches appropriately placed and interconnected so that only with the shutter and other parts of the source in proper position can safe emission of radiation out an open shutter occur.

PORTABLE SOURCE OF RADIOACTIVITY

DOEpatents

Goertz, R.C.; Ferguson, K.R.; Rylander, E.W.; Safranski, L.M.

1959-06-16

A portable source for radiogiaphy or radiotherapy is described. It consists of a Tl/sup 170/ or Co/sup 60/ source mounted in a rotatable tungsten alloy plug. The plug rotates within a brass body to positions of safety or exposure. Provision is made for reloading and carrying the device safely. (T.R.H.)

10 CFR 39.41 - Design and performance criteria for sources.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 39.41 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR WELL... source for use in well logging applications if— (1) The sealed source is doubly encapsulated; (2) The... use in well logging applications if it meets the requirements of USASI N5.10-1968, “Classification of...

Management. A continuing bibliography with indexes. [March 1980

NASA Technical Reports Server (NTRS)

1980-01-01

This bibliography cites 604 reports, articles, and other documents introduced into the NASA scientific and technical information system in 1979 covering the management of research and development, contracts, production, logistics, personnel, safety, reliability and quality control. Program, project, and systems management; management policy, philosophy, tools, and techniques; decision making processes for managers; technology assessment; management of urban problems; and information for managers on Federal resources, expenditures, financing, and budgeting are also covered. Abstracts are provided as well as subject, personal author, and corporate source indexes.

A Language-Based Approach To Wireless Sensor Network Security

DTIC Science & Technology

2014-03-06

128 – RPC 119 7.0 Secure RPC 87 32.0 Figure 1: SpartanRPC Memory Overhead (L) and Impact on Messaging (R) Figure 2: Scalaness /nesT Compilation and...language for developing real WSN applica- tions. This language, called Scalaness /nesT, extends Scala with staging features for executing programs on hubs...particular note here is the fact that cross-stage type safety of Scalaness source code ensures that compiled bytecode can be deployed to, and run on

What Happened, and Why: Toward an Understanding of Human Error Based on Automated Analyses of Incident Reports. Volume 2

NASA Technical Reports Server (NTRS)

Ferryman, Thomas A.; Posse, Christian; Rosenthal, Loren J.; Srivastava, Ashok N.; Statler, Irving C.

2006-01-01

The objective of the Aviation System Monitoring and Modeling project of NASA's Aviation Safety and Security Program was to develop technologies to enable proactive management of safety risk, which entails identifying the precursor events and conditions that foreshadow most accidents. Information about what happened can be extracted from quantitative data sources, but the experiential account of the incident reporter is the best available source of information about why an incident happened. In Volume I, the concept of the Scenario was introduced as a pragmatic guide for identifying similarities of what happened based on the objective parameters that define the Context and the Outcome of a Scenario. In this Volume II, that study continues into the analyses of the free narratives to gain understanding as to why the incident occurred from the reporter s perspective. While this is just the first experiment, the results of our approach are encouraging and indicate that it will be possible to design an automated analysis process guided by the structure of the Scenario that can achieve the level of consistency and reliability of human analysis of narrative reports.

2011 Annual Health Physics Report for the HEU transparency Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radev, R

2012-04-30

During the 2008 calendar year, Lawrence Livermore National Laboratory (LLNL) provided health physics support for the Highly Enriched Uranium (HEU) Transparency Program for external and internal radiation protection. They also provided technical expertise related to BDMS radioactive sources and Russian radiation safety regulatory compliance. For the calendar year 2008, there were 158 person-trips that required dose monitoring of the U.S. monitors. Of the 158 person-trips, 148 person-trips were SMVs and 10 person-trips were Transparency Monitoring Office (TMO) trips. There were 6 monitoring visits by TMO monitors to facilities other than UEIE and 8 to UEIE itself. There were three monitoringmore » visits (source changes) that were back-to-back with a total of 24 monitors. LLNL's Hazard Control Department laboratories provided the dosimetry services for the HEU Transparency monitors. In 2008, the HEU Transparency activities in Russia were conducted in a radiologically safe manner for the HEU Transparency monitors in accordance with the expectations of the HEU Transparency staff, NNSA and DOE. The HEU Transparency now has thirteen years of successful experience in developing and providing health and safety support in meeting its technical objectives.« less

2008 Annual Health Physics Report for the HEU Transparency Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radev, R.

2009-03-24

During the 2008 calendar year, Lawrence Livermore National Laboratory (LLNL) provided health physics support for the Highly Enriched Uranium (HEU) Transparency Program for external and internal radiation protection. They also provided technical expertise related to BDMS radioactive sources and Russian radiation safety regulatory compliance. For the calendar year 2008, there were 158 person-trips that required dose monitoring of the U.S. monitors. Of the 158 person-trips, 148 person-trips were SMVs and 10 person-trips were Transparency Monitoring Office (TMO) trips. There were 6 monitoring visits by TMO monitors to facilities other than UEIE and 8 to UEIE itself. There were three monitoringmore » visits (source changes) that were back-to-back with a total of 24 monitors. LLNL’s Hazard Control Department laboratories provided the dosimetry services for the HEU Transparency monitors. In 2008, the HEU Transparency activities in Russia were conducted in a radiologically safe manner for the HEU Transparency monitors in accordance with the expectations of the HEU Transparency staff, NNSA and DOE. The HEU Transparency now has thirteen years of successful experience in developing and providing health and safety support in meeting its technical objectives.« less

Adolescence, Attention Allocation, and Driving Safety

PubMed Central

Romer, Daniel; Lee, Yi-Ching; McDonald, Catherine C.; Winston, Flaura K.

2014-01-01

Motor vehicle crashes are the leading source of morbidity and mortality in adolescents in the United States and the developed world. Inadequate allocation of attention to the driving task and to driving hazards are important sources of adolescent crashes. We review major explanations for these attention failures with particular focus on the roles that brain immaturity and lack of driving experience play in causing attention problems. The review suggests that the potential for overcoming inexperience and immaturity with training to improve attention to both the driving task and hazards is substantial. Nevertheless, there are large individual differences in both attentional abilities and risky driving tendencies that pose challenges to novice driver policies. Research that can provide evidence-based direction for such policies is urgently needed. PMID:24759442

Two sides of the safety coin?: How patient engagement and safety climate jointly affect error occurrence in hospital units.

PubMed

Schiffinger, Michael; Latzke, Markus; Steyrer, Johannes

2016-01-01

Safety climate (SC) and more recently patient engagement (PE) have been identified as potential determinants of patient safety, but conceptual and empirical studies combining both are lacking. On the basis of extant theories and concepts in safety research, this study investigates the effect of PE in conjunction with SC on perceived error occurrence (pEO) in hospitals, controlling for various staff-, patient-, and hospital-related variables as well as the amount of stress and (lack of) organizational support experienced by staff. Besides the main effects of PE and SC on error occurrence, their interaction is examined, too. In 66 hospital units, 4,345 patients assessed the degree of PE, and 811 staff assessed SC and pEO. PE was measured with a new instrument, capturing its core elements according to a recent literature review: Information Provision (both active and passive) and Activation and Collaboration. SC and pEO were measured with validated German-language questionnaires. Besides standard regression and correlational analyses, partial least squares analysis was employed to model the main and interaction effects of PE and SC on pEO, also controlling for stress and (lack of) support perceived by staff, various staff and patient attributes, and potential single-source bias. Both PE and SC are associated with lower pEO, to a similar extent. The joint effect of these predictors suggests a substitution rather than mutually reinforcing interaction. Accounting for control variables and/or potential single-source bias slightly attenuates some effects without altering the results. Ignoring PE potentially amounts to forgoing a potential source of additional safety. On the other hand, despite the abovementioned substitution effect and conjectures of SC being inert, PE should not be considered as a replacement for SC.

Materials-related issues in the safety and licensing of nuclear fusion facilities

NASA Astrophysics Data System (ADS)

Taylor, N.; Merrill, B.; Cadwallader, L.; Di Pace, L.; El-Guebaly, L.; Humrickhouse, P.; Panayotov, D.; Pinna, T.; Porfiri, M.-T.; Reyes, S.; Shimada, M.; Willms, S.

2017-09-01

Fusion power holds the promise of electricity production with a high degree of safety and low environmental impact. Favourable characteristics of fusion as an energy source provide the potential for this very good safety and environmental performance. But to fully realize the potential, attention must be paid in the design of a demonstration fusion power plant (DEMO) or a commercial power plant to minimize the radiological hazards. These hazards arise principally from the inventory of tritium and from materials that become activated by neutrons from the plasma. The confinement of these radioactive substances, and prevention of radiation exposure, are the primary goals of the safety approach for fusion, in order to minimize the potential for harm to personnel, the public, and the environment. The safety functions that are implemented in the design to achieve these goals are dependent on the performance of a range of materials. Degradation of the properties of materials can lead to challenges to key safety functions such as confinement. In this paper the principal types of material that have some role in safety are recalled. These either represent a potential source of hazard or contribute to the amelioration of hazards; in each case the related issues are reviewed. The resolution of these issues lead, in some instances, to requirements on materials specifications or to limits on their performance.

Occupational Violence and Aggression Experienced by Nursing and Caring Professionals.

PubMed

Shea, Tracey; Sheehan, Cathy; Donohue, Ross; Cooper, Brian; De Cieri, Helen

2017-03-01

To examine the extent and source of occupational violence and aggression (OVA) experienced by nursing and caring professionals. This study also examines the relative contributions of demographic characteristics and workplace and individual safety factors in predicting OVA. A cross-sectional study design with data collected using an online survey of employees in the nursing and caring professions in Victoria, Australia. Survey data collected from 4,891 members of the Australian Nursing and Midwifery Federation (Victorian branch) were analyzed using logistic regression. Sixty-seven percent of respondents reported experiencing OVA in the preceding 12 months, with nearly 20% experiencing OVA on a weekly or daily basis. The dominant sources of OVA were patients (79%) or relatives of patients (48%). Logistic regression analysis revealed that respondents working in public hospitals and aged care facilities were more likely to experience OVA, compared to those working in other workplaces. While higher levels of safety compliance reduced the likelihood of experiencing OVA, role overload and workplace safety factors such as prioritization of employee safety and leading indicators of occupational health and safety were stronger predictors. The likelihood of healthcare workers experiencing OVA varies across demographic and workplace characteristics. While some demographic characteristics and individual safety factors were significant predictors, our results suggest that a greater reduction in OVA could be achieved by improving workplace safety. The study's outcomes identify workforce segments that are most vulnerable to OVA. The study also highlights workplace safety factors such as the prioritization of employee safety that might assist in the reduction of OVA. © 2016 Sigma Theta Tau International.

10 CFR 39.77 - Notification of incidents and lost sources; abandonment procedures for irretrievable sources.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., radiation overexposures, excessive levels and concentrations of radiation, and certain other accidents as... RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Security, Records, Notifications § 39.77 Notification of...

10 CFR 39.77 - Notification of incidents and lost sources; abandonment procedures for irretrievable sources.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., radiation overexposures, excessive levels and concentrations of radiation, and certain other accidents as... RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Security, Records, Notifications § 39.77 Notification of...

10 CFR 39.77 - Notification of incidents and lost sources; abandonment procedures for irretrievable sources.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., radiation overexposures, excessive levels and concentrations of radiation, and certain other accidents as... RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Security, Records, Notifications § 39.77 Notification of...

10 CFR 39.77 - Notification of incidents and lost sources; abandonment procedures for irretrievable sources.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., radiation overexposures, excessive levels and concentrations of radiation, and certain other accidents as... RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Security, Records, Notifications § 39.77 Notification of...

10 CFR 39.77 - Notification of incidents and lost sources; abandonment procedures for irretrievable sources.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., radiation overexposures, excessive levels and concentrations of radiation, and certain other accidents as... RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Security, Records, Notifications § 39.77 Notification of...

Bibliography on Liquefied Natural Gas (LNG) safety

NASA Technical Reports Server (NTRS)

Ordin, P. M.

1976-01-01

Approximately 600 citations concerning safety of liquefied natural gas and liquid methane are presented. Each entry includes the title, author, abstract, source, description of figures, key references, and major descriptors for retrieving the document. An author index is provided as well as an index of descriptors.

Implementing Cooperative Behavior & Control Using Open Source Technology Across Heterogeneous Vehicles

DTIC Science & Technology

2015-03-26

8 January 2015]. [34] M. Pursifull, " DIY Drones," 1 August 2012. [Online]. Available: http://diydrones.com/group/arducopterusergroup/forum/topics...Camp Atterbury Range Safety course and has his range control safety card . 2. GENERAL MINIMIZING CONDITIONS The following general minimizing