Measurement (with NLC RF group) LCLS and related technologies (LCLS work related to NLC work) Collimation Systems (with Beam Delivery group) Combined Laser System (with NLC sources group) Polarized Positron Sources (with NLC sources group) Crab Cavity Phase Control System Timing and RF distribution System (with
... classified under ECCN 5B002, and equivalent or related software and technology classified under ECCNs 5D002... service in any country listed in Country Group E:1 in supplement No. 1 to part 740 of the EAR, or release of source code or technology to any national of a country listed in Country Group E:1. Reexports and...
Unruh, James F.; Till, Paul D.; Palumbo, Daniel L. (Technical Monitor)
2002-01-01
There were two primary objectives of the research effort reported herein. The first objective was to identify and evaluate noise source/path identification technology applicable to single engine propeller driven aircraft that can be used to identify interior noise sources originating from structure-borne engine/propeller vibration, airborne propeller transmission, airborne engine exhaust noise, and engine case radiation. The approach taken to identify the contributions of each of these possible sources was first to conduct a Principal Component Analysis (PCA) of an in-flight noise and vibration database acquired on a Cessna Model 182E aircraft. The second objective was to develop and evaluate advanced technology for noise source ranking of interior panel groups such as the aircraft windshield, instrument panel, firewall, and door/window panels within the cabin of a single engine propeller driven aircraft. The technology employed was that of Acoustic Holography (AH). AH was applied to the test aircraft by acquiring a series of in-flight microphone array measurements within the aircraft cabin and correlating the measurements via PCA. The source contributions of the various panel groups leading to the array measurements were then synthesized by solving the inverse problem using the boundary element model.
The purpose of this work was to contribute to a better understanding of challenges and solutions to equitable provision of assistive technologies in resource limited environments by (i) describing sources of awareness, types of providers and costs of assistive technologies; (ii) describing common reasons for not possessing assistive technologies; and (iii) comparing these sources, providers, costs and reasons among younger and older men and women living in urban and rural settings. Descriptive and analytic statistics were used to analyze cross-sectional data from a total sample of 581 hearing aid users, wheelchair users, individuals with hearing impairments not using hearing aids and individuals with ambulatory impairments not using wheelchairs living in eight districts of Bangladesh. Major sources of awareness, types of providers and costs paid varied between users of different types of assistive technology. Lack of affordability was the main reason for not possessing assistive technology. Outcome differences were found between younger and older groups, men and women, and literate and illiterate respondents, while no differences related to place of living were identified. Age, gender, type of impairment and socioeconomic status need to be considered when planning and implementing equitable provision of assistive technologies. Implications for Rehabilitation Provision of assistive technologies needs to be made affordable as lack of affordability was the major reason for not possessing such technologies. To ensure equitable provision of assistive technology, services ought to consider age, gender, impairment and socioeconomic status of their target groups. This includes offering a range of products of different sizes provided by culturally appropriate personnel at affordable cost, which to many may be at no or reduced cost. To cater to the assistive technology needs among the most vulnerable groups, assistive technology providers may learn from CBR strategies, such as, awareness raising and service delivery at community level, the use of local resources, collaboration and coordination, and the consideration of cultural factors.
Zapata, Aimee Marie L; Beaudreau, Sherry A; O'Hara, Ruth; Bereknyei Merrell, Sylvia; Bruce, Janine; Garrison-Diehn, Christina; Gould, Christine E
2018-01-01
We sought to learn where older veterans seek information about anxiety and coping. Due to increasing use of technology in health care, we also explored benefits and barriers of using technology to teach coping skills. Twenty veterans (mean age = 69.5 years, SD = 7.3) participated in semi-structured interviews in which we inquired about where they seek information about anxiety. We explored quantitative and qualitative differences for veterans with high versus low anxiety. In follow-up focus groups, we examined opinions about learning coping skills using technology. Though veterans primarily named health care professionals as sources of information about anxiety, online searches and reading books were frequently mentioned. Reported benefits of using technology were convenience and standardized instruction of coping skills. Barriers included lack of interaction and frustration with technology usability. Older veterans use multiple sources, heavily rely on interpersonal sources (e.g., professionals, friends), and employ varied search strategies regarding how to cope with anxiety. Using technology to teach coping skills was generally acceptable to older veterans. Health care professionals could guide patients towards credible online and book sources. Providing instruction about using technology may help older adults use technology to learn coping skills.
...-reference control technology. 63.487 Section 63.487 Protection of Environment ENVIRONMENTAL PROTECTION... SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutant Emissions: Group I Polymers and Resins § 63.487 Batch front-end process vents—reference control technology. (a) Batch front-end process...
...-reference control technology. 63.487 Section 63.487 Protection of Environment ENVIRONMENTAL PROTECTION... SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutant Emissions: Group I Polymers and Resins § 63.487 Batch front-end process vents—reference control technology. (a) Batch front-end process...
...-reference control technology. 63.487 Section 63.487 Protection of Environment ENVIRONMENTAL PROTECTION... SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutant Emissions: Group I Polymers and Resins § 63.487 Batch front-end process vents—reference control technology. (a) Batch front-end process...
Source Horizon: 3D Printing,” LinuxInsider, May 28, 2014, http://www.linuxinsider.com/story/ 80519.html; Nozomi Hayase, “ Blockchain Revolution: Open...Source Democracy for the 99%,” openDemocracy UK, August 4, 2014, https://www.opendemocracy.net/ourkingdom/nozomi-hayase/ blockchain -revolution-open...8,000. The funds raised on Kickstarter: $500,000.75 A private technology watchdog, the ETC Group, notified the US Department of Agriculture about
Bearman, Chris; Miller, Ronald c.; Orasanu, Judith M.
2011-01-01
Introduction: NextGen technologies promise to provide considerable benefits in terms of enhancing operations and improving safety. However, there needs to be a thorough human factors evaluation of the way these systems will change the way in which pilot and controllers share information. The likely impact of these new technologies on pilot/controller coordinated decision making is considered in this paper using the "operational, informational and evaluative disconnect" framework. Method: Five participant focus groups were held. Participants were four experts in human factors, between x and x research students and a technical expert. The participant focus group evaluated five key NextGen technologies to identify issues that made different disconnects more or less likely. Results: Issues that were identified were: Decision Making will not necessarily improve because pilots and controllers possess the same information; Having a common information source does not mean pilots and controllers are looking at the same information; High levels of automation may lead to disconnects between the technology and pilots/controllers; Common information sources may become the definitive source for information; Overconfidence in the automation may lead to situations where appropriate breakdowns are not initiated. Discussion: The issues that were identified lead to recommendations that need to be considered in the development of NextGen technologies. The current state of development of these technologies provides a good opportunity to utilize recommendations at an early stage so that NextGen technologies do not lead to difficulties in resolving breakdowns in coordinated decision making.
... identified emission point or group of affected emission points, an identification of control technology in... on the design, operation, size, estimated control efficiency and any other information deemed... CATEGORIES Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...
... identified emission point or group of affected emission points, an identification of control technology in... on the design, operation, size, estimated control efficiency and any other information deemed... CATEGORIES Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...
... identified emission point or group of affected emission points, an identification of control technology in... on the design, operation, size, estimated control efficiency and any other information deemed... CATEGORIES Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...
... identified emission point or group of affected emission points, an identification of control technology in... on the design, operation, size, estimated control efficiency and any other information deemed... CATEGORIES Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...
... MACT determinations. 63.53 Section 63.53 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... CATEGORIES Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air... identified emission point or group of affected emission points, an identification of control technology in...
Discusses budgeting strategies for school media technology programs. Highlights include sources for school funding, school district budget information, control of the budget, how to write an effective budget, working with other community and school groups, local politics, and sidebars that discuss spreadsheets and maintenance budgets. (LRW)
Many health informatics organizations seem to be slow to take up the advantages of dynamic, web-based technologies for providing services to, and interaction with, their members; these are often the very technologies they promote for use within healthcare environments. This paper aims to introduce some of the many free/libre/open source (FLOSS) applications that are now available to develop interactive websites and dynamic online communities as part of the structure of health informatics organizations, and to show how the Open Source Nursing Informatics Working Group (OSNI) of the special interest group in nursing informatics of the International Medical Informatics Association (IMIA-NI) is using some of these tools to develop an online community of nurse informaticians through their website, at . Some background introduction to FLOSS applications is used for the benefit of those less familiar with such tools, and examples of some of the FLOSS content management systems (CMS) being used by OSNI are described. The experiences of the OSNI will facilitate a knowledgeable nursing contribution to the wider discussions on the applications of FLOSS within health and healthcare, and provides a model that many other groups could adopt.
efforts of a group of six researchers in the fields of electromagnetics , radar and antenna technology. Research was conducted during this reporting...Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39.18 Research in Antenna technology, Radar Technology and Electromagnetic Scattering...Scattering-Matrix Theory Based on Gaussian Beams………...65 4.5.3 Array realization of complex-source beam……………………………85 4.5.4 Electromagnetic Scattering
a group of six researchers in the fields of electromagnetics , radar and antenna technology. Research was conducted during this reporting period in...Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39.18 Research in Antenna technology, Radar Technology and Electromagnetic Scattering Phenomena...Matrix Theory Based on Gaussian Beams………...65 4.5.3 Array realization of complex-source beam……………………………85 4.5.4 Electromagnetic Scattering-Matrix
Sudden water source pollution resulting from hazardous materials has gradually become a major threat to the safety of the urban water supply. Over the past years, various treatment techniques have been proposed for the removal of the pollutants to minimize the threat of such pollutions. Given the diversity of techniques available, the current challenge is how to scientifically select the most desirable alternative for different threat degrees. Therefore, a novel two-stage evaluation system was developed based on a circulation-correction improved Group-G1 method to determine the optimal emergency treatment technology scheme, considering the areas of contaminant elimination in both drinking water sources and water treatment plants. In stage 1, the threat degree caused by the pollution was predicted using a threat evaluation index system and was subdivided into four levels. Then, a technique evaluation index system containing four sets of criteria weights was constructed in stage 2 to obtain the optimum treatment schemes corresponding to the different threat levels. The applicability of the established evaluation system was tested by a practical cadmium-contaminated accident that occurred in 2012. The results show this system capable of facilitating scientific analysis in the evaluation and selection of emergency treatment technologies for drinking water source security.
... Transfer and Advancement Act Section 12(d) of the National Technology Transfer and Advancement Act of 1995... Division, Measurement Technology Group (Mail Code: E143-02), Research Triangle Park, NC 27711; telephone... significant economic impact on a substantial number of small entities. Small entities include small businesses...
Defense-Industrial Initiatives Group at CSIS, where he worked on projects related to U.S. and European technology and industrial bases supporting defense...Prior to joining CSIS, Mr. Ben-Ari was a research associate at George Washington University’s Center for International Science and Technology ...collaborative research and development programs for Gilat Satellite Networks Ltd., an Israeli high- technology company in the field of satellite
Scholarly groups have long served as hubs of academic life and the embodiments of their disciplines, but they face uncertain and divergent futures. Some disciplinary associations are struggling to remain relevant and financially viable as demographic and technological changes threaten their traditional sources of revenue. The core of their…
The terms 'data fusion,' 'sensor fusion,' multi-sensor integration,' and 'multi-source integration' have been used widely in the technical literature to refer to a variety of techniques, technologies, systems, and applications which employ and/or combine data derived from multiple information sources. Applications of data fusion range from real-time fusion of sensor information for the navigation of mobile robots to the off-line fusion of both human and technical strategic intelligence data. The Department of Defense Critical Technologies Plan lists data fusion in the highest priority group of critical technologies, but just what is data fusion? The DoD Critical Technologies Plan states that data fusion involves 'the acquisition, integration, filtering, correlation, and synthesis of useful data from diverse sources for the purposes of situation/environment assessment, planning, detecting, verifying, diagnosing problems, aiding tactical and strategic decisions, and improving system performance and utility.' More simply states, sensor fusion refers to the combination of data from multiple sources to provide enhanced information quality and availability over that which is available from any individual source alone. This paper presents a survey of the state-of-the- art in data fusion technologies, system components, and applications. A set of characteristics which can be utilized to classify data fusion systems is presented. Additionally, a unifying mathematical and conceptual framework within which to understand and organize fusion technologies is described. A discussion of often overlooked issues in the development of sensor fusion systems is also presented.
Open source technologies and mobile innovations have radically changed the way people interact with technology. These innovations and advancements have been used across various disciplines and already have a significant impact. Microscopy, with focus on visually appealing contrasting colors for better appreciation of morphology, forms the core of the disciplines such as Pathology, microbiology, and anatomy. Here, learning happens with the aid of multi-head microscopes and digital camera systems for teaching larger groups and in organizing interactive sessions for students or faculty of other departments. The cost of the original equipment manufacturer (OEM) camera systems in bringing this useful technology at all the locations is a limiting factor. To avoid this, we have used the low-cost technologies like Raspberry Pi, Mobile high definition link and 3D printing for adapters to create portable camera systems. Adopting these open source technologies enabled us to convert any binocular or trinocular microscope be connected to a projector or HD television at a fraction of the cost of the OEM camera systems with comparable quality. These systems, in addition to being cost-effective, have also provided the added advantage of portability, thus providing the much-needed flexibility at various teaching locations.
Schacht, Robert M.; Gahungu, Athanase; Gallagher, Larry
This report discusses a project that compared the rate of use of assistive technology (AT) services and devices by American Indians and Alaska Natives with that of other ethnically diverse groups, identified barriers, and examined consumer satisfaction regarding AT. The project drew on four sources of data: the Rehabilitation Services…
I. Ensemble Development Group: a) Produces activity planning software for in spacecraft; b) Built on Eclipse Rich Client Platform (open source development and runtime software); c) Funded by multiple sources including the Mars Technology Program; d) Incorporated the use of Agile Development. II. Next Generation Uplink Planning System: a) Researches the Activity Planning and Sequencing Subsystem for Mars Science Laboratory (APSS); b) APSS includes Ensemble, Activity Modeling, Constraint Checking, Command Editing and Sequencing tools plus other uplink generation utilities; c) Funded by the Mars Technology Program; d) Integrates all of the tools for APSS.
AIISIRACT Iex~am uowo,, We have developed an in situ technique for determining the group -V composition in gas-source molecular beam epitaxy (GSMBE...growth of mixed group -V compounds, such as GaAsP, InAsP, and InGaAsP. The in situ technique consists of monitoring the intensity oscillations of ’ group -V...epitaxy ........................................................................... 58 13. A study of group -V desorption from InP and InAs by reflection
Pralle, Martin U.; Puscasu, Irina; Daly, James; Fallon, Keith; Loges, Peter; Greenwald, Anton; Johnson, Edward
2007-04-01
There is a strong desire to create narrowband infrared light sources as personnel beacons for application in infrared Identify Friend or Foe (IFF) systems. This demand has augmented dramatically in recent years with the reports of friendly fire casualties in Afghanistan and Iraq. ICx Photonics' photonic crystal enhanced TM (PCE TM) infrared emitter technology affords the possibility of creating narrowband IR light sources tuned to specific IR wavebands (near 1-2 microns, mid 3-5 microns, and long 8-12 microns) making it the ideal solution for infrared IFF. This technology is based on a metal coated 2D photonic crystal of air holes in a silicon substrate. Upon thermal excitation the photonic crystal modifies the emitted yielding narrowband IR light with center wavelength commensurate with the periodicity of the lattice. We have integrated this technology with microhotplate MEMS devices to yield 15mW IR light sources in the 3-5 micron waveband with wall plug efficiencies in excess of 10%, 2 orders of magnitude more efficient that conventional IR LEDs. We have further extended this technology into the LWIR with a light source that produces 9 mW of 8-12 micron light at an efficiency of 8%. Viewing distances >500 meters were observed with fielded camera technologies, ideal for ground to ground troop identification. When grouped into an emitter panel, the viewing distances were extended to 5 miles, ideal for ground to air identification.
Two key issues in using technologies such as digital image processing and geographic information systems are a conceptually and methodologically valid research design and the exploitation of varied sources of data. With this realized, the new technologies offer anthropologists the opportunity to test hypotheses about spatial and temporal variations in the features of interest within a regionally coherent mosaic of social groups and landscapes. Current research on the Mountain OK of Papua New Guinea is described with reference to these issues.
... has various NO X sources. The 4110 Paper Mill-Coating unit requires Best Available Control Technology... Carolina; Negative Declarations for Groups I, II, III and IV Control Techniques Guidelines; and Reasonably... for Groups I and I CTG. ``EPA-R04-OAR-2010-0018'' for comments regarding the negative declarations for...
The telephone and the internet have become popular sources of psychological help in various types of distress, including a suicide crisis. To gain more insight into the unique features of these media, we compared characteristics of calls to three technologically mediated sources of help that are part of the volunteer-based Israeli Association for Emotional First Aid (ERAN): Telephonic hotline (n = 4426), personal chat (n = 373) and an asynchronous online support group (n = 954). Threats of suicide were much more frequent among participants in the asynchronous support group than the telephone and personal chat. These findings encourage further research into suicide-related interpersonal exchanges in asynchronous online support groups.
García, Carlos Galdino Martínez; Dorward, Peter; Rehman, Tahir
2012-08-01
In order to identify the factors influencing adoption of technologies promoted by government to small-scale dairy farmers in the highlands of central Mexico, a field survey was conducted. A total of 115 farmers were grouped through cluster analysis (CA) and divided into three wealth status categories (high, medium and low) using wealth ranking. Chi-square analysis was used to examine the association of wealth status with technology adoption. Four groups of farms were differentiated in terms of farms' dimensions, farmers' education, sources of incomes, wealth status, management of herd, monetary support by government and technological availability. Statistical differences (p < 0.05) were observed in the milk yield per herd per year among groups. Government organizations (GO) participated little in the promotion of the 17 technologies identified, six of which focused on crop or forage production and 11 of which were related to animal husbandry. Relatives and other farmers played an important role in knowledge diffusion and technology adoption. Although wealth status had a significant association (p < 0.05) with adoption, other factors including importance of the technology to farmers, usefulness and productive benefits of innovations together with farmers' knowledge of them, were important. It is concluded that the analysis of the information per group and wealth status was useful to identify suitable crop or forage related and animal husbandry technologies per group and wealth status of farmers. Therefore the characterizations of farmers could provide a useful starting point for the design and delivery of more appropriate and effective extension.
Massive, multi-source, heterogeneous police data and social data brings challenges to the current police work. The existing massive data resources are studied as the research object to excavate the group of multilateral relations by using large data technology for data archiving. The results of the study could provide technical support to police enforcement departments for fighting crime and preventing crime.
Kupka, M S; Dorn, C; Richter, O; van der Ven, H; Baur, M
2003-08-01
It is well established that medical information sources develop continuously from printed media to digital online sources. To demonstrate effectiveness and feasibility of decentralized performed web-based information sources for health professionals, two projects are described. The information platform of the German Working Group for Information Technologies in Gynecology and Obstetrics (AIG) and the information source concerning the German Registry for in vitro fertilization (DIR) were implemented using ordinary software and standard computer equipment. Only minimal resources and training were necessary to perform safe and reliable web-based information sources with a high correlation of effectiveness in costs and time exposure.
Energy security was identified in the National Energy Strategy (NES) as a major issue for the Department of Energy (DOE). As part of a process designed by the DOE to identify technologies important to implementing the NES, an expert working group was convened to consider which technologies can best contribute to reducing the nation's economic vulnerability to future disruptions of world oil supplies, the working definition of energy security. Other working groups were established to deal with economic growth, environmental quality, and technical foundations. Energy Security working group members were chosen to represent as broad a spectrum of energy supply and end-use technologies as possible and were selected for their established reputations as experienced experts with an ability to be objective. The time available for this evaluation was very short. The group evaluated technologies using criteria taken from the NES which can be summarized for energy security as follows: diversifying sources of world oil supply so as to decrease the increasing monopoly status of the Persian Gulf region; reducing the importance of oil use in the US economy to diminish the impact of future disruptions in oil supply; and increasing the preparedness of the US to deal with oil supply disruptions by having alternatives available at a known price. The result of the first phase of the evaluation process was the identification of technology groups determined to be clearly important for reducing US vulnerability to oil supply disruptions. The important technologies were mostly within the high leverage areas of oil and gas supply and transportation demand but also included hydrogen utilization, biomass, diversion resistant nuclear power, and substitute industrial feedstocks.
known as Modulating Retroreflector (MRR) mode. In this configuration, a source laser transmits a beam to an optical receiver which receives the...be adapted for use at sea and found that interference was a key issue. SPAWAR Systems Center Pacific has spent over a decade trying to address this...ad-hoc wireless technology non-proprietary and radio agnostic. One of the issues with wireless technologies used at sea is the issue of ― beam
In this paper, we describe the experiences of the Automated Software Engineering Group at the NASA Ames Research Center in the development and application of three different transformation systems. The systems span the entire technology range, from deductive synthesis, to logic-based transformation, to almost compiler-like source-to-source transformation. These systems also span a range of NASA applications, including solving solar system geometry problems, generating data analysis software, and analyzing multi-threaded Java code.
Many health informatics organisations do not seem to use, on a practical basis, for the benefit of their activities and interaction with their members, the very technologies that they often promote for use within healthcare environments. In particular, many organisations seem to be slow to take up the benefits of interactive web technologies. This paper presents an introduction to some of the many free/libre and open source (FLOSS) applications currently available and using the LAMP - Linux, Apache, MySQL, PHP architecture - as a way of cheaply deploying reliable, scalable, and secure web applications. The experience of moving to applications using LAMP architecture, in particular that of the Open Source Nursing Informatics (OSNI) Working Group of the Special Interest Group in Nursing Informatics of the International Medical Informatics Association (IMIA-NI), in using PostNuke, a FLOSS Content Management System (CMS) illustrates many of the benefits of such applications. The experiences of the authors in installing and maintaining a large number of websites using FLOSS CMS to develop dynamic, interactive websites that facilitate real engagement with the members of IMIA-NI OSNI, the IMIA Open Source Working Group, and the Centre for Health Informatics Research and Development (CHIRAD), as well as other organisations, is used as the basis for discussing the potential benefits that could be realised by others within the health informatics community.
8 January 2015]. [34] M. Pursifull, " DIY Drones," 1 August 2012. [Online]. Available: http://diydrones.com/group/arducopterusergroup/forum/topics...Camp Atterbury Range Safety course and has his range control safety card . 2. GENERAL MINIMIZING CONDITIONS The following general minimizing
The hottest technology trends in higher education today can be boiled down to two roughly converse capabilities: the delivery of time- and space-shifted instruction to individual students (think podcasts), and the coordination of disparate-source content within the classroom, for enriched group experiences. The first is taking advantage of…
Park, Catherine C; Yom, Sue S; Podgorsak, Matthew B; Harris, Eleanor; Price, Robert A; Bevan, Alison; Pouliot, Jean; Konski, Andre A; Wallner, Paul E
2010-03-15
The development of novel technologies for the safe and effective delivery of radiation is critical to advancing the field of radiation oncology. The Emerging Technology Committee of the American Society for Therapeutic Radiology and Oncology appointed a Task Group within its Evaluation Subcommittee to evaluate new electronic brachytherapy methods that are being developed for, or are already in, clinical use. The Task Group evaluated two devices, the Axxent Electronic Brachytherapy System by Xoft, Inc. (Fremont, CA), and the Intrabeam Photon Radiosurgery Device by Carl Zeiss Surgical (Oberkochen, Germany). These devices are designed to deliver electronically generated radiation, and because of their relatively low energy output, they do not fall under existing regulatory scrutiny of radioactive sources that are used for conventional radioisotope brachytherapy. This report provides a descriptive overview of the technologies, current and future projected applications, comparison of competing technologies, potential impact, and potential safety issues. The full Emerging Technology Committee report is available on the American Society for Therapeutic Radiology and Oncology Web site. Copyright 2010. Published by Elsevier Inc.
Park, Catherine C., E-mail: cpark@radonc.ucsf.ed; Yom, Sue S.; Podgorsak, Matthew B.
The development of novel technologies for the safe and effective delivery of radiation is critical to advancing the field of radiation oncology. The Emerging Technology Committee of the American Society for Therapeutic Radiology and Oncology appointed a Task Group within its Evaluation Subcommittee to evaluate new electronic brachytherapy methods that are being developed for, or are already in, clinical use. The Task Group evaluated two devices, the Axxent Electronic Brachytherapy System by Xoft, Inc. (Fremont, CA), and the Intrabeam Photon Radiosurgery Device by Carl Zeiss Surgical (Oberkochen, Germany). These devices are designed to deliver electronically generated radiation, and because ofmore » their relatively low energy output, they do not fall under existing regulatory scrutiny of radioactive sources that are used for conventional radioisotope brachytherapy. This report provides a descriptive overview of the technologies, current and future projected applications, comparison of competing technologies, potential impact, and potential safety issues. The full Emerging Technology Committee report is available on the American Society for Therapeutic Radiology and Oncology Web site.« less
Background Adolescents present many challenges in providing them effective preventive services and health care. Yet, they are typically the early adopters of new technology (eg, the Internet). This creates important opportunities for engaging youths via eHealth. Objective To describe how adolescents use technology for their health-information needs, identify the challenges they face, and highlight some emerging roles of health professionals regarding eHealth services for adolescents. Methods Using an inductive qualitative research design, 27 focus groups were conducted in Ontario, Canada. The 210 participants (55% female, 45% male; median age 16 years) were selected to reflect diversity in age, sex, geographic location, cultural identity, and risk. An 8-person team analyzed and coded the data according to major themes. Results Study participants most-frequently sought or distributed information related to school (89%), interacting with friends (85%), social concerns (85%), specific medical conditions (67%), body image and nutrition (63%), violence and personal safety (59%), and sexual health (56%). Finding personally-relevant, high-quality information was a pivotal challenge that has ramifications on the depth and types of information that adolescents can find to answer their health questions. Privacy in accessing information technology was a second key challenge. Participants reported using technologies that clustered into 4 domains along a continuum from highly-interactive to fixed information sources: (1) personal communication: telephone, cell phone, and pager; (2) social communication: e-mail, instant messaging, chat, and bulletin boards; (3) interactive environments: Web sites, search engines, and computers; and (4) unidirectional sources: television, radio, and print. Three emerging roles for health professionals in eHealth include: (1) providing an interface for adolescents with technology and assisting them in finding pertinent information sources; (2) enhancing connection to youths by extending ways and times when practitioners are available; and (3) fostering critical appraisal skills among youths for evaluating the quality of health information. Conclusions This study helps illuminate adolescent health-information needs, their use of information technologies, and emerging roles for health professionals. The findings can inform the design and more-effective use of eHealth applications for adolescent populations. PMID:14713660
Adolescents present many challenges in providing them effective preventive services and health care. Yet, they are typically the early adopters of new technology (eg, the Internet). This creates important opportunities for engaging youths via eHealth. To describe how adolescents use technology for their health-information needs, identify the challenges they face, and highlight some emerging roles of health professionals regarding eHealth services for adolescents. Using an inductive qualitative research design, 27 focus groups were conducted in Ontario, Canada. The 210 participants (55% female, 45% male; median age 16 years) were selected to reflect diversity in age, sex, geographic location, cultural identity, and risk. An 8-person team analyzed and coded the data according to major themes. Study participants most-frequently sought or distributed information related to school (89%), interacting with friends (85%), social concerns (85%), specific medical conditions (67%), body image and nutrition (63%), violence and personal safety (59%), and sexual health (56%). Finding personally-relevant, high-quality information was a pivotal challenge that has ramifications on the depth and types of information that adolescents can find to answer their health questions. Privacy in accessing information technology was a second key challenge. Participants reported using technologies that clustered into 4 domains along a continuum from highly-interactive to fixed information sources: (1) personal communication: telephone, cell phone, and pager; (2) social communication: e-mail, instant messaging, chat, and bulletin boards; (3) interactive environments: Web sites, search engines, and computers; and (4) unidirectional sources: television, radio, and print. Three emerging roles for health professionals in eHealth include: (1) providing an interface for adolescents with technology and assisting them in finding pertinent information sources; (2) enhancing connection to youths by extending ways and times when practitioners are available; and (3) fostering critical appraisal skills among youths for evaluating the quality of health information. This study helps illuminate adolescent health-information needs, their use of information technologies, and emerging roles for health professionals. The findings can inform the design and more-effective use of eHealth applications for adolescent populations.
The Physics Opportunities Working Group was convened with the rather general mandate to explore physic opportunities that may arise as new accelerator technologies and facilities come into play. Five topics were considered during the workshop: QED at critical field strength, novel positron sources, crystal accelerators, suppression of beamstrahlung, and muon colliders. Of particular interest was the sense that a high energy muon collider might be technically feasible and certainly deserves serious study.
The Physics Opportunities Working Group was convened with the rather general mandate to explore physic opportunities that may arise as new accelerator technologies and facilities come into play. Five topics were considered during the workshop: QED at critical field strength, novel positron sources, crystal accelerators, suppression of beamstrahlung, and muon colliders. Of particular interest was the sense that a high energy muon collider might be technically feasible and certainly deserves serious study.
To ascertain perceived access of dietitians to power in the workplace. The conceptual framework was Kanter's theory of organizational power. The Conditions for Work Effectiveness Questionnaire was used to measure perceived access to sources of power: information, support, resources, and opportunities. Demographic data were collected to identify factors that may enhance empowerment. The questionnaire was sent to a random sample of 348 dietitians chosen from members of the Clinical Nutrition Management dietetic practice group of the American Dietetic Association. Blank questionnaires were returned by 99 (28.4%) people not working as clinical nutrition managers, which left 249 in the sample. Descriptive statistics were used to organize and summarize data. One-way analysis of variance and t tests were performed to identify differences in responses based on levels of education, work setting, and information technology skills. Usable questionnaires were received from 178 people (71.5%). On a 5-point scale, scores for access to information (mean +/- standard deviation [SD] = 3.8 +/- 0.7), opportunity (mean +/- SD = 3.6 +/- 0.7), support (mean +/- SD = 3.2 +/- 0.9), and resources (mean +/- SD = 3.1 +/- 0.8) demonstrated that clinical nutrition managers perceived themselves as having substantial access to sources of empowerment. Those having higher levels of education, working in larger hospitals, having better-developed information technology skills, and using information technology more frequently had statistically significant higher empowerment scores (P = < or = .05) than contrasting groups in each category. Clinical nutrition managers are empowered and able to assume leadership roles in today's health care settings. Their power may be enhanced by asserting more pressure to gain greater access to sources of power: support, information, resources, and opportunities.
Environmental Protection Agency, Research Triangle Park, NC. Air Pollution Technical Information Center.
This volume is the fourth in a series of compilations presenting abstracts and indexes of translations of technical air pollution literature. The entries are grouped into 12 subject categories: Emission Sources, Control Methods, Measurement Methods, Air Quality Measurements, Atmospheric Interaction, Basic Science and Technology, Effects--Human…
This document introduces photovoltaic technology to individuals and groups specializing in development activities. Examples of actual installations illustrate the many services supplied by photovoltaic systems in development applications, including water pumping, lighting, health care, refrigeration, communications, and a variety of productive uses. The various aspects of the technology are explored to help potential users evaluate whether photovoltaics can assist them in achieving their organizational goals. Basic system design, financing techniques, and the importance of infrastructure are included, along with additional sources of information and major US photovoltaic system suppliers.
The influence of social media and technological developments has changed how groups and organizations advocating for social change generate awareness and participation in their causes. In this single class activity students will (a) analyze notions of activism and "slacktivism" from scholarly and popular sources to apply these concepts…
The contributions of the Goddard group to the history of X-ray astronomy are numerous and varied. One role that the group has continued to play involves the pursuit of techniques for the measurement and interpretation of the X-ray spectra of cosmic sources. The latest development is the selection of the X-ray microcalorimeter for the Advanced X-ray Astrophysics Facility (AXAF) study payload. This technology is likely to revolutionize the study of cosmic X-ray spectra.
Atar 101 to M-53. He knows their strengths (and also their weaknesses...) better than anyone. In addition, his personal contacts made while at the...decompression chamber through which a subsystem of the third-stage engine was overloaded. Human error, a possible consequence of the unusual time...Hamburg has recently set up three study groups for structural molecular biology . The "source of light" for these groups, which are working closely with the
Zhilenkov, A. A.; Chernyi, S. G.; Nyrkov, A. P.; Sokolov, S. S.
2017-10-01
Nitrides of group III elements are a very suitable basis for deriving light-emitting devices with the radiating modes lengths of 200-600 nm. The use of such semiconductors allows obtaining full-color RGB light sources, increasing record density of a digital data storage device, getting high-capacity and efficient sources of white light. Electronic properties of such semi-conductors allow using them as a basis for high-power and high-frequency transistors and other electronic devices, the specifications of which are competitive with those of SiC-based devices. Only since 2000, the technology of cultivation of crystals III-N of group has come to the level of wide recognition by both abstract science, and the industry that has led to the creation of the multi-billion dollar market. And this is despite a rather low level of development of the production technology of devices on the basis of III-N of materials. The progress that has happened in the last decade requires the solution of the main problem, constraining further development of this technology today - ensuring cultivation of III-N structures of necessary quality. For this purpose, it is necessary to solve problems of the analysis and optimization of processes in installations of epitaxial growth, and, as a result, optimization of its constructions.
Amorphous indium gallium zinc oxide (IGZO) field effect transistors (FETs) are a promising technology for a wide range of electronic applications. Herein, we fabricated and characterized FETs with a nanostructured IGZO network as a sensing transducer. The IGZO was patterned using colloidal lithography and electrohydrodynamic printing, where an 8 μm wide nanostructured close-packed hexagonal IGZO network was obtained. Electrical characterization of the nanostructured IGZO network FET demonstrated a drain-source current on-off ratio of 6.1 × 10 3 and effective electron mobilities of 3.6 cm 2 V -1 s -1 . The nanostructured IGZO network was functionalized by aminosilane groups with cross-linked glucose oxidase. The devices demonstrated a decrease in drain-source conductance and a more positive V ON with increasing glucose concentration. These changes are ascribed to the acceptor-like surface states associated with positively charged aminosilane groups attached to the nanostructured IGZO surface. Continuous monitoring of the drain-source current indicates a stepwise and fully reversible response to glucose concentrations with a short response time. The specific catalytic reaction between the GOx enzyme and glucose eliminates interference from acetaminophen/ascorbic acid. We demonstrate that nanostructured IGZO FETs have improved sensitivity compared to non-nanostructured IGZO for sensing glucose and can be potentially extended to other biosensor technologies.
Quantum information processing (QIP) promises to revolutionize existing methods of manipulating data, via truly unique paradigms based on fundamental nonclassical physical phenomenon. However, the eventual success of optical QIP depends critically on the available technologies. Currently, creating multiple-photon states is extremely inefficient because almost no source thus far has been well optimized. Additionally, high-efficiency single-photon detectors can drastically improve multi-photon QIP (typical efficiencies are ˜70%). In fact, it has been shown that scalable linear optical quantum computing is possible only if the product of the source and detector efficiencies exceeds ˜67%. The research presented here focuses on developing optimized source and detector technologies for enabling scalable QIP. The goal of our source research is to develop an ideal " indistinguishable" source of ultrabright polarization-entangled but spatially- and spectrally-unentangled photon pairs. We engineer such an ideal source by first designing spatio-spectrally unentangled photons using optimized and group-velocity matched spontaneous parametric down conversion (SPDC). Next, we generate polarization-entangled photons using the engineered SPDC. Here we present solutions to the various challenges encountered during the indistinguishable source development. We demonstrate high-fidelity ultrafast pulsed and cw-diode laser-pumped sources of polarization-entangled photons, as well as the first production of polarization-entanglement directly from the highly nonlinear biaxial crystal BiB3O6 (BiBO). We also discuss the first experimental confirmation of the emission-angle dependence of the downconversion polarization (the Migdall effect), and a novel scheme for polarization-dependent focusing. The goal of our single-photon detector research is to develop a very high-efficiency detection system that can also resolve incident photon number, a feature absent from the typical detectors employed for QIP. We discuss the various cryogenic, optical and electronic challenges encountered en route to detector development and present details on detector characterization, ultra-short electronics design and photon-number-resolution studies. The source and detector technologies developed here share a common goal: to enhance the efficiency of existing quantum protocols and pave the way for new ones. Here we discuss some of the possible benefits via a popular quantum protocol---teleportation---as well as a novel quantum communication technique---hyper-fingerprinting. Taken as a whole, this dissertation explores viable technological options for enhancing optical quantum information protocols, offers a perspective on the current status and limitations of existing technologies, and highlights the possibilities enabled by optimized photonic sources and detectors.
In order to design effective health technologies and systems, it is important to understand how patients learn and make decisions about health technologies used in their care. The objective of this study was to examine patients' source of learning about technologies used in their care and how the source related to their trust in the technology used. Individual face-to-face and telephone interviews were conducted with 24 patients. Thirteen unique sources of information about technology were identified and three major themes emerged; outside of the work system versus inside the work system, when the health information was provided, and the medium used. Patients used multiple sources outside of the health care work system to learn about technologies that will be used in their care. Results showed a relationship between learning about technologies from web sources and trust in technologies but no relationship between learning about technologies from health care providers and trust in technologies. PMID:20967654
To support the missions of the US Department of Energy (DOE) Special Technologies Program, Argonne National Laboratory is defining the requirements for an automated software system that will search electronic databases on technology. This report examines the work done and results to date. Argonne studied existing commercial and government sources of technology databases in five general areas: on-line services, patent database sources, government sources, aerospace technology sources, and general technology sources. First, it conducted a preliminary investigation of these sources to obtain information on the content, cost, frequency of updates, and other aspects of their databases. The Laboratory then performedmore » detailed examinations of at least one source in each area. On this basis, Argonne recommended which databases should be incorporated in DOE`s Technology Information Management System.« less
Kebschull, Moritz; Fittler, Melanie Julia; Demmer, Ryan T; Papapanou, Panos N
2017-01-01
Today, -omics analyses, including the systematic cataloging of messenger RNA and microRNA sequences or DNA methylation patterns in a cell population, organ, or tissue sample, allow for an unbiased, comprehensive genome-level analysis of complex diseases, offering a large advantage over earlier "candidate" gene or pathway analyses. A primary goal in the analysis of these high-throughput assays is the detection of those features among several thousand that differ between different groups of samples. In the context of oral biology, our group has successfully utilized -omics technology to identify key molecules and pathways in different diagnostic entities of periodontal disease.A major issue when inferring biological information from high-throughput -omics studies is the fact that the sheer volume of high-dimensional data generated by contemporary technology is not appropriately analyzed using common statistical methods employed in the biomedical sciences.In this chapter, we outline a robust and well-accepted bioinformatics workflow for the initial analysis of -omics data generated using microarrays or next-generation sequencing technology using open-source tools. Starting with quality control measures and necessary preprocessing steps for data originating from different -omics technologies, we next outline a differential expression analysis pipeline that can be used for data from both microarray and sequencing experiments, and offers the possibility to account for random or fixed effects. Finally, we present an overview of the possibilities for a functional analysis of the obtained data.
Logothetis, S.; Karachaliou, E.; Valari, E.; Stylianidis, E.
2018-05-01
This paper presents a Cloud-based open source system for storing and processing data from a 3D survey approach. More specifically, we provide an online service for viewing, storing and analysing BIM. Cloud technologies were used to develop a web interface as a BIM data centre, which can handle large BIM data using a server. The server can be accessed by many users through various electronic devices anytime and anywhere so they can view online 3D models using browsers. Nowadays, the Cloud computing is engaged progressively in facilitating BIM-based collaboration between the multiple stakeholders and disciplinary groups for complicated Architectural, Engineering and Construction (AEC) projects. Besides, the development of Open Source Software (OSS) has been rapidly growing and their use tends to be united. Although BIM and Cloud technologies are extensively known and used, there is a lack of integrated open source Cloud-based platforms able to support all stages of BIM processes. The present research aims to create an open source Cloud-based BIM system that is able to handle geospatial data. In this effort, only open source tools will be used; from the starting point of creating the 3D model with FreeCAD to its online presentation through BIMserver. Python plug-ins will be developed to link the two software which will be distributed and freely available to a large community of professional for their use. The research work will be completed by benchmarking four Cloud-based BIM systems: Autodesk BIM 360, BIMserver, Graphisoft BIMcloud and Onuma System, which present remarkable results.
On the territory of modern oil production soil, vegetation, ecosystem conditions of the environment are significantly transformed. Researches have been conducted on the oil production territories located in a boreal coniferous forest natural zone from 2005 to 2015. Standard geobotanical and soil methods are used. Mechanical destruction of a plant cover, change of the water conditions, intake of oil products and salty waters in ecosystems, pollution of the atmosphere are considered as the major technology-related factors defining transformation of land ecosystems at operation of the oil field. Under the mechanical destruction of a plant cover the pioneer plant communities are formed. These communities are characterized by most reduced specific wealth with prevalence of types of meadow groups of plants and presence of types of wetland groups of plants. The biodiversity of biocenosis which are affected linear infrastructure facilities of oil production territories and change of the water conditions, decreases. It is observed decrease in species wealth, simplification of structure of communities. Under the salting of soils in ecosystems there is a decrease species diversity of communities to prevalence nitrophilous and meadow plant species. At the increased content of organic substances in the soils that is a consequence of intake of oil products, is characteristic increase in specific richness of communities, introduction of types of wetland and oligotrophic groups of plants in forest communities. Influence depends on distance to an influence source. In process of removal from a source of atmospheric pollution in forest communities there is a decrease in species diversity and complication of structure of community. It is caused by introduction of types of meadow groups of plants in ecotone sites of the forest communities located near a source of influence and restoration of structural features of forest communities in process of removal from an influence source. Operation of oil fields leads to introduction of the synanthropes relating to meadow and wetland groups of plants. Transformation depends on loading time. At the initial stage of operation of the oil field the synantropization of a plant cover leads to increase in species diversity. At long technogenic loading decrease in values of indexes of a biodiversity due to oppression of native species of plants is observed. Technology-related influence of oil fields is a regional factor of change of specific structure of plant communities. Modern oil production has to be followed by purposeful formation of the operated natural and technology-related ecosystems with adjustable parameters and higher stability in relation to a complex of technogenic oil-field influence.
Community participation is central to achieving sustainable natural resource management. A prerequisite to informed participation is that community and stakeholder groups have access to different knowledge sources, are more closely attuned to the different issues and viewpoints, and are sufficiently equipped to understand and maybe resolve complex…
Henning, Elizabeth; Van der Westhuizen, Duan; Diseko, Rabaitse
2005-01-01
This article gives an account of an inquiry into two different postgraduate student groups' ways of engaging with a virtual learning environment. Using a variety of data sources, including learning artefacts, interview data, open-ended qualitative questionnaires and online discussion postings, the inquiry captured processes of engagement of the…
DART is a computer aided system populated with influence models to determine quantitative benefits derived by matching requirements and technologies. The DART database is populated with data from over 900 DOE sites from 10 Field Offices. These sites are either source terms, such as buried waste pits, or soil or groundwater contaminated plumes. The data, traceable to published documents, consists of site-specific data (contaminants, area, volume, depth, size, remedial action dates, site preferred remedial option), problems (e.g., offsite contaminant plume), and Site Technology Coordinating Group (STCG) need statements (also contained in the Ten-Year Plan). DART uses this data to calculatemore » and derive site priorities, risk rankings, and site specific technology requirements. DART is also populated with over 900 industry and DOE SCFA technologies. Technology capabilities can be used to match technologies to waste sites based on the technology`s capability to meet site requirements and constraints. Queries may be used to access, sort, roll-up, and rank site data. Data roll-ups may be graphically displayed.« less
Masthi, N R Ramesh; Madhusudan, M; Puthussery, Yannick P
2015-11-01
The global positioning system (GPS) technology along with Google Earth is used to measure (spatial map) the accurate distribution of morbidity, mortality and planning of interventions in the community. We used this technology to find out its role in the investigation of a cholera outbreak, and also to identify the cause of the outbreak. This study was conducted in a village near Bengaluru, Karnataka in June 2013 during a cholera outbreak. House-to-house survey was done to identify acute watery diarrhoea cases. A hand held GPS receiver was used to record north and east coordinates of the households of cases and these values were subsequently plotted on Google Earth map. Water samples were collected from suspected sources for microbiological analysis. A total of 27 cases of acute watery diarrhoea were reported. Fifty per cent of cases were in the age group of 14-44 yr and one death was reported. GPS technology and Google Earth described the accurate location of household of cases and spot map generated showed clustering of cases around the suspected water sources. The attack rate was 6.92 per cent and case fatality rate was 3.7 per cent. Water samples collected from suspected sources showed the presence of Vibrio cholera O1 Ogawa. GPS technology and Google Earth were easy to use, helpful to accurately pinpoint the location of household of cases, construction of spot map and follow up of cases. Outbreak was found to be due to contamination of drinking water sources.
In systems biology, and many other areas of research, there is a need for the interoperability of tools and data sources that were not originally designed to be integrated. Due to the interdisciplinary nature of systems biology, and its association with high throughput experimental platforms, there is an additional need to continually integrate new technologies. As scientists work in isolated groups, integration with other groups is rarely a consideration when building the required software tools. We illustrate an approach, through the discussion of a purpose built software architecture, which allows disparate groups to reuse tools and access data sources in a common manner. The architecture allows for: the rapid development of distributed applications; interoperability, so it can be used by a wide variety of developers and computational biologists; development using standard tools, so that it is easy to maintain and does not require a large development effort; extensibility, so that new technologies and data types can be incorporated; and non intrusive development, insofar as researchers need not to adhere to a pre-existing object model. By using a relatively simple integration strategy, based upon a common identity system and dynamically discovered interoperable services, a light-weight software architecture can become the focal point through which scientists can both get access to and analyse the plethora of experimentally derived data.
In this era of exascale instruments for astronomy we must naturally develop next generation capabilities for the unprecedented data volume and velocity that will arrive due to the veracity of these ground-based sensor and observatories. Integrating scientific algorithms stewarded by scientific groups unobtrusively and rapidly; intelligently selecting data movement technologies; making use of cloud computing for storage and processing; and automatically extracting text and metadata and science from any type of file are all needed capabilities in this exciting time. Our group at NASA JPL has promoted the use of open source data management technologies available from the Apache Software Foundation (ASF) in pursuit of constructing next generation data management and processing systems for astronomical instruments including the Expanded Very Large Array (EVLA) in Socorro, NM and the Atacama Large Milimetre/Sub Milimetre Array (ALMA); as well as for the KAT-7 project led by SKA South Africa as a precursor to the full MeerKAT telescope. In addition we are funded currently by the National Science Foundation in the US to work with MIT Haystack Observatory and the University of Cambridge in the UK to construct a Radio Array of Portable Interferometric Devices (RAPID) that will undoubtedly draw from the rich technology advances underway. NASA JPL is investing in a strategic initiative for Big Data that is pulling in these capabilities and technologies for astronomical instruments and also for Earth science remote sensing. In this talk I will describe the above collaborative efforts underway and point to solutions in open source from the Apache Software Foundation that can be deployed and used today and that are already bringing our teams and projects benefits. I will describe how others can take advantage of our experience and point towards future application and contribution of these tools.
Among the various approaches to improving present technologies for waste-water treatment, several involve the use of plants, which can remove pollutants and provide materials useful as animal feeds or energy sources. Various aquatic plants are being proposed in such approaches, and the duckweeds in particular, an essentially unique group of higher aquatic plants, might be especially advantageous in such systems. Although this article focuses on only this one group of plants, it can nevertheless provide an introduction to issues that are both scientifically challenging and existentially inescapable.
A cleaner technology is a source reduction or recycle method |applied to eliminate or significantly reduce hazardous waste generation. Source reduction includes product changes and source control. Source control can be further characterized as input material changes, technology...
xi- ACKNOWLEDGMENTS The I/DBTWG co-chairs would like to thank Ms. Linda Quicker of RAND for her efforts in coordinating the I/DBTWG meeting and...Subgroup on Authoritative Data Sources: Mr. Bill Dunn 0930-0945 Report from M&S Complex Data Task Force Subgroup on Categorization: Mr. Len Seligman ...issues; and need to address maintenance of the Authoritative Data Source directory by DMSO/IAC. - 15- Mr. Len Seligman : Report from M&S Complex Data Tasm
Shaw, David; Dondorp, Wybo; Geijsen, Niels; de Wert, Guido
2015-12-01
New techniques in regenerative medicine may soon enable the creation of human organs inside animals using induced pluripotent stem cells. This technology has the potential to solve the organ scarcity problem by providing a limitless source of personalised organs for transplantation, but also raises several ethical issues, particularly concerning animal welfare, the 'human features' problem and human dignity. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/
Willcox, Jane C; van der Pligt, Paige; Ball, Kylie; Wilkinson, Shelley A; Lappas, Martha; McCarthy, Elizabeth A; Campbell, Karen J
2015-10-28
Evidence suggests that women are failing to meet guidelines for nutrition, physical activity, and weight gain during pregnancy. Interventions to promote a healthy lifestyle in pregnancy demonstrate mixed results and many are time and resource intensive. mHealth-delivered interventions offer an opportunity to provide trusted source information in a timely and cost-effective manner. Studies regarding women's and health professionals' views of mHealth in antenatal care are limited. This study aimed to explore women's and health professionals' views regarding mHealth information sources and interventions to assist women to eat well, be physically active, and gain healthy amounts of weight in pregnancy. A descriptive qualitative research approach employed focus groups and in-depth interviews with 15 pregnant or postpartum women and 12 in-depth interviews with health professionals including two from each category: obstetricians, general practitioners, midwives, dietitians, physiotherapists, and community pharmacists. All interviews were transcribed verbatim and thematically analyzed. Women uniformly embraced the concept of mHealth information sources and interventions in antenatal care and saw them as central to information acquisition and ideally incorporated into future antenatal care processes. Health professionals exhibited varied views perceiving mHealth as an inevitable, often parallel, service rather than one integrated into the care model. Four key themes emerged: engagement, risk perception, responsibility, and functionality. Women saw their ability to access mHealth elements as a way to self-manage or control information acquisition that was unavailable in traditional care models and information sources. The emergence of technology was perceived by some health professionals to have shifted control of information from trusted sources, such as health professionals and health organizations, to nontrusted sources. Some health professionals were concerned about the medicolegal risks of mHealth (incorrect or harmful information and privacy concerns), while others acknowledged that mHealth was feasible if inherent risks were addressed. Across both groups, there was uncertainty as to who should be responsible for ensuring high-quality mHealth. The absence of a key pregnancy or women's advocacy group, lack of health funds for technologies, and the perceived inability of maternity hospitals to embrace technology were seen to be key barriers to provision. Women consistently identified the functionality of mHealth as adding value to antenatal care models. For some health professionals, lack of familiarity with and fear of mHealth limited their engagement with and comprehension of the capacity of new technologies to support antenatal care. Women exhibited positive views regarding mHealth for the promotion of a healthy lifestyle in antenatal care. Conversely, health professionals expressed a much wider variation in attitudes and were more able to identify potential risks and barriers to development and implementation. This study contributes to the understanding of the opportunities and challenges in developing mHealth lifestyle interventions in antenatal care.
van der Pligt, Paige; Ball, Kylie; Wilkinson, Shelley A; Lappas, Martha; McCarthy, Elizabeth A; Campbell, Karen J
2015-01-01
Background Evidence suggests that women are failing to meet guidelines for nutrition, physical activity, and weight gain during pregnancy. Interventions to promote a healthy lifestyle in pregnancy demonstrate mixed results and many are time and resource intensive. mHealth-delivered interventions offer an opportunity to provide trusted source information in a timely and cost-effective manner. Studies regarding women’s and health professionals’ views of mHealth in antenatal care are limited. Objective This study aimed to explore women’s and health professionals’ views regarding mHealth information sources and interventions to assist women to eat well, be physically active, and gain healthy amounts of weight in pregnancy. Methods A descriptive qualitative research approach employed focus groups and in-depth interviews with 15 pregnant or postpartum women and 12 in-depth interviews with health professionals including two from each category: obstetricians, general practitioners, midwives, dietitians, physiotherapists, and community pharmacists. All interviews were transcribed verbatim and thematically analyzed. Results Women uniformly embraced the concept of mHealth information sources and interventions in antenatal care and saw them as central to information acquisition and ideally incorporated into future antenatal care processes. Health professionals exhibited varied views perceiving mHealth as an inevitable, often parallel, service rather than one integrated into the care model. Four key themes emerged: engagement, risk perception, responsibility, and functionality. Women saw their ability to access mHealth elements as a way to self-manage or control information acquisition that was unavailable in traditional care models and information sources. The emergence of technology was perceived by some health professionals to have shifted control of information from trusted sources, such as health professionals and health organizations, to nontrusted sources. Some health professionals were concerned about the medicolegal risks of mHealth (incorrect or harmful information and privacy concerns), while others acknowledged that mHealth was feasible if inherent risks were addressed. Across both groups, there was uncertainty as to who should be responsible for ensuring high-quality mHealth. The absence of a key pregnancy or women’s advocacy group, lack of health funds for technologies, and the perceived inability of maternity hospitals to embrace technology were seen to be key barriers to provision. Women consistently identified the functionality of mHealth as adding value to antenatal care models. For some health professionals, lack of familiarity with and fear of mHealth limited their engagement with and comprehension of the capacity of new technologies to support antenatal care. Conclusions Women exhibited positive views regarding mHealth for the promotion of a healthy lifestyle in antenatal care. Conversely, health professionals expressed a much wider variation in attitudes and were more able to identify potential risks and barriers to development and implementation. This study contributes to the understanding of the opportunities and challenges in developing mHealth lifestyle interventions in antenatal care. PMID:26510886
Los Alamos National Laboratory states that its mission is “To solve national security challenges through scientific excellence.” The Science Undergraduate Laboratory Internship (SULI) programs exists to engage undergraduate students in STEM work by providing opportunity to work at DOE facilities. As an undergraduate mechanical engineering intern under the SULI program at Los Alamos during the fall semester of 2016, I had the opportunity to contribute to the mission of the Laboratory while developing skills in a STEM discipline. I worked with Technology Applications, an engineering group that supports non-proliferation, counter terrorism, and emergency response missions. This group specializes in toolmore » design, weapons engineering, rapid prototyping, and mission training. I assisted with two major projects during my appointment Los Alamos. The first was a thermal source transportation unit, intended to safely contain a nuclear thermal source during transit. The second was a soil drying unit for use in nuclear postblast field sample collection. These projects have given me invaluable experience working alongside a team of professional engineers. Skills developed include modeling, simulation, group design, product and system design, and product testing.« less
This report presents a scoping study for networked microgrids which are defined as "Interoperable groups of multiple Advanced Microgrids that become an integral part of the electricity grid while providing enhanced resiliency through self-healing, aggregated ancillary services, and real-time communication." They result in optimal electrical system configurations and controls whether grid-connected or in islanded modes and enable high penetrations of distributed and renewable energy resources. The vision for the purpose of this document is: "Networked microgrids seamlessly integrate with the electricity grid or other Electric Power Sources (EPS) providing cost effective, high quality, reliable, resilient, self-healing power delivery systems." Scopingmore » Study: Networked Microgrids September 4, 2014 Eddy Trinklein, Michigan Technological University Gordon Parker, Michigan Technological University Wayne Weaver, Michigan Technological University Rush Robinett, Michigan Technological University Lucia Gauchia Babe, Michigan Technological University Chee-Wooi Ten, Michigan Technological University Ward Bower, Ward Bower Innovations LLC Steve Glover, Sandia National Laboratories Steve Bukowski, Sandia National Laboratories Prepared by Michigan Technological University Houghton, Michigan 49931 Michigan Technological University« less
The cardiac magnetic resonance (CMR) of children at 3.0 T presents a unique set of technical challenges because of their small cardiac anatomical structures, fast heart rates, and the limited ability to keep motionless and hold breathe, which could cause problems associated with field inhomogeneity and degrade the image quality. The aim of our study was to evaluate the effect of dual-source parallel radiofrequency (RF) transmission on the B1 homogeneity and image quality in children with CMR at 3.0 T. The study was approved by the institutional ethics committee and written informed consent was obtained. A total of 30 free-breathing children and 30 breath-hold children performed CMR examinations with dual-source and single-source RF transmission. The B1 homogeneity, contrast ratio (CR) of cine images, and off-resonance artifacts in cine images between dual-source and single-source RF transmission were assessed in free-breathing and breath-hold groups, respectively. In both free-breathing and breath-hold groups, higher mean percentage of flip angle (free-breathing group: 104.2 ± 4.6 vs 95.5 ± 6.3, P < .001; breath-hold group: 101.5 ± 5.1 vs 92.5 ± 6.3, P < .001) and lower coefficient of variation (free-breathing group: 0.06 ± 0.02 vs 0.09 ± 0.03, P < .001; breath-hold group: 0.07 ± 0.03 vs 0.10 ± 0.04, P = .005) were found with dual-source than with single-source RF transmission. Both the CRs in the horizontal long axis (HLA) and short axis of cine images with dual-source RF transmission was improved (P < .05 for all). The scores of off-resonance artifacts in the HLA with dual-source RF transmission were higher in both free-breathing and breath-hold groups (P < .05 for all), with substantial interreader agreement (kappa values from 0.68 to 0.74). Compared with conventional single-source, dual-source parallel RF transmission could significantly improve the B1 homogeneity and image quality for CMR in children at 3.0 T. This technology could be taken into account in CMR for children with cardiac diseases.
Bonnie Ruefenacht; Greg Liknes; Andrew J. Lister; Haans Fisk; Dan Wendt
2009-01-01
Since 2001, the USDA Forest Service (USFS) has used classification and regression-tree technology to map USFS Forest Inventory and Analysis (FIA) biomass, forest type, forest type groups, and National Forest vegetation. This prior work used Cubist/See5 software for the analyses. The objective of this project, sponsored by the Remote Sensing Steering Committee (RSSC),...
....04. Env-A 1000 Prevention, Abatement, and Control of Open Source Air Pollution 5/19/1989 8/19/1994... Available Control Technology (RACT) 05/26/11 11/8/12, 77 FR 66921 Approved PART Env-A 1201 through 1222 for... TP-0008 7/8/2011 8/22/2012, 77 FR 50602 Flue Gas Desulfurization System. Concord Litho Group ARD-07...
....04. Env-A 1000 Prevention, Abatement, and Control of Open Source Air Pollution 5/19/1989 8/19/1994... Available Control Technology (RACT) 05/26/11 11/8/12, 77 FR 66921 Approved PART Env-A 1201 through 1222 for... FR 50602 Flue Gas Desulfurization System. Concord Litho Group ARD-07-003 9/17/2007 11/5/2012, 77 FR...
aromatic hydrocarbons, and landfill leachates . Phytoremediation has been used for point and nonpoint source hazardous waste control. 1.2 Types of... Phytoremediation Prepared by Interstate Technology and Regulatory Cooperation Work Group Phytoremediation Work Team December 1999 Decision Tree...1999 2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE Phytoremediation Decision Tree 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c
Today's battlefield space is extremely complex, dealing with an enemy that is neither well-defined nor well-understood. Adversaries are comprised of widely-distributed, loosely-networked groups engaging in nefarious activities. Situational understanding is needed by decision makers; understanding of adversarial capabilities and intent is essential. Information needed at any time is dependent on the mission/task at hand. Information sources potentially providing mission-relevant information are disparate and numerous; they include sensors, social networks, fusion engines, internet, etc. Management of these multi-dimensional informational sources is critical. This paper will present a new approach being undertaken to answer the challenge of enhancing battlefield understanding by optimizing the utilization of available informational sources (means) to required missions/tasks as well as determining the "goodness'" of the information acquired in meeting the capabilities needed. Requirements are usually expressed in terms of a presumed technology solution (e.g., imagery). A metaphor of the "magic rabbits" was conceived to remove presumed technology solutions from requirements by claiming the "required" technology is obsolete. Instead, intelligent "magic rabbits" are used to provide needed information. The question then becomes: "WHAT INFORMATION DO YOU NEED THE RABBITS TO PROVIDE YOU?" This paper will describe a new approach called Mission-Informed Needed Information - Discoverable, Available Sensing Sources (MINI-DASS) that designs a process that builds information acquisition missions and determines what the "magic rabbits" need to provide in a manner that is machine understandable. Also described is the Missions and Means Framework (MMF) model used, the process flow utilized, the approach to developing an ontology of information source means and the approach for determining the value of the information acquired.
Building on the work that was started two decades ago, Jacobs Space Operations Group has utilized state of the art PTI technologies to assess the current condition of the assets they manage under the Test and Operations Support Contract (TOSC). Specifically, the Asset Management department leveraged the benefits of ultrasound technology to quantify a motor issue in the Liquid Oxygen Storage Area, and troubleshoot the sources prior to loading the tank to perform Verification and Validation (VV) activities. This technology was efficient, easy to implement, and provided system engineers with data on a possible source of the problem. In situations where legacy motors are exhibiting unexpected noises, it may seem easier to remove and refurbish the motor and replace the bearings because that solution resolves most of the common causes of the noise. However, that solution would have involved additional spending and may not have solved issues stemming from the foundation, if those existed. By utilizing the ultrasound equipment provided by UE Systems, the sound profiles allowed Jacobs TOSC team to determine that the issue resembled a faulty bearing. After replacing the bearing, the unexpected noise ceased.
In recent years, the cloud computing technology has a rapid development, especially open source cloud computing. Open source cloud computing has attracted a large number of user groups by the advantages of open source and low cost, have now become a large-scale promotion and application. In this paper, firstly we briefly introduced the main functions and architecture of the open source cloud computing OpenStack tools, and then discussed deeply the core problems of computer labs in colleges and universities. Combining with this research, it is not that the specific application and deployment of university computer rooms with OpenStack tool. The experimental results show that the application of OpenStack tool can efficiently and conveniently deploy cloud of university computer room, and its performance is stable and the functional value is good.
At the end of January I travelled to the States to speak at and attend the first O'Reilly Bioinformatics Technology Conference. It was a large, well-organized and diverse meeting with an interesting history. Although the meeting was not a typical academic conference, its style will, I am sure, become more typical of meetings in both biological and computational sciences.Speakers at the event included prominent bioinformatics researchers such as Ewan Birney, Terry Gaasterland and Lincoln Stein; authors and leaders in the open source programming community like Damian Conway and Nat Torkington; and representatives from several publishing companies including the Nature Publishing Group, Current Science Group and the President of O'Reilly himself, Tim O'Reilly. There were presentations, tutorials, debates, quizzes and even a 'jam session' for musical bioinformaticists.
At the end of January I travelled to the States to speak at and attend the first O’Reilly Bioinformatics Technology Conference [14]. It was a large, well-organized and diverse meeting with an interesting history. Although the meeting was not a typical academic conference, its style will, I am sure, become more typical of meetings in both biological and computational sciences. Speakers at the event included prominent bioinformatics researchers such as Ewan Birney, Terry Gaasterland and Lincoln Stein; authors and leaders in the open source programming community like Damian Conway and Nat Torkington; and representatives from several publishing companies including the Nature Publishing Group, Current Science Group and the President of O’Reilly himself, Tim O’Reilly. There were presentations, tutorials, debates, quizzes and even a ‘jam session’ for musical bioinformaticists. PMID:18628852
The purpose of this poster is to present the application and assessment of advanced technologies in a real-world environment - wastewater effluent and source waters - for detecting six drugs (azithromycin, fluoxetine, omeprazole, levothyroxine, methamphetamine, and methylenedioxymethamphetamine). The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technica
The purpose of this poster is to present the application and assessment of advanced state-of-the-art technologies in a real-world environment - wastewater effluent and source waters - for detecting six drugs [azithromycin, fluoxetine, omeprazole, levothyroxine, methamphetamine, methylenedioxymethamphetamine (MDMA)]. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansi
The proposed technology allows use of the latest microcircuit technology with lowest power and fastest speed, with minimal delay and engineering costs, through new Radiation Hardened by Design (RHBD) techniques that do not require extensive process characterization, technique evaluation and re-design at each Moore's Law generation. The separation of critical node groups is explicitly parameterized so it can be increased as microcircuit technologies shrink. The technology will be open access to radiation tolerant circuit vendors. INNOVATION: This technology would enhance computation intensive applications such as autonomy, robotics, advanced sensor and tracking processes, as well as low power applications such as wireless sensor networks. OUTCOME / RESULTS: 1) Simulation analysis indicates feasibility. 2)Compact voting latch 65 nanometer test chip designed and submitted for fabrication -7/2016. INFUSION FOR SPACE / EARTH: This technology may be used in any digital integrated circuit in which a high level of resistance to Single Event Upsets is desired, and has the greatest benefit outside low earth orbit where cosmic rays are numerous.
This study sought to compare the image quality and radiation dose of coronary computed tomography angiography (CCTA) from prospectively triggered 128-slice CT (128-MSCT) versus dual-source 64-slice CT (DSCT). The study was approved by the Medical Ethics Committee at Tongji Medical College of Huazhong University of Science and Technology. Eighty consecutive patients with stable heart rates lower than 70 bpm were enrolled. Forty patients were scanned with 128-MSCT, and the other 40 patients were scanned with DSCT. Two radiologists independently assessed the image quality in segments (diameter >1 mm) according to a three-point scale (1: excellent; 2: moderate; 3: insufficient). The CCTA radiation dose was calculated. Eighty patients with 526 segments in the 128-MSCT group and 544 segments in the DSCT group were evaluated. The image quality 1, 2 and 3 scores were 91.6%, 6.9% and 1.5%, respectively, for the 128-MSCT group and 97.6%, 1.7% and 0.7%, respectively, for the DSCT group, and there was a statistically significant inter-group difference (P ≤ 0.001). The effective doses were 3.0 mSv in the 128-MSCT group and 4.5 mSv in the DSCT group (P ≤ 0.001). Compared with DSCT, CCTA with prospectively triggered 128-MSCT had adequate image quality and a 33.3% lower radiation dose.
Teacher shortages have encouraged initiatives to tailor training programs to meet the demand in both past, current and future contexts. Such programs have been streamlined to ensure a rapid response to shortages, in addition to also drawing participants from non-traditional groups as a source of potential educators. Within teacher education,…
Saxena, Rekha; Nagpal, B N; Srivastava, Aruna; Gupta, S K; Dash, A P
2009-08-01
Geographical information System (GIS) has emerged as the core of the spatial technology which integrates wide range of dataset available from different sources including Remote Sensing (RS) and Global Positioning System (GPS). Literature published during the decade (1998-2007) has been compiled and grouped into six categories according to the usage of the technology in malaria epidemiology. Different GIS modules like spatial data sources, mapping and geo-processing tools, distance calculation, digital elevation model (DEM), buffer zone and geo-statistical analysis have been investigated in detail, illustrated with examples as per the derived results. These GIS tools have contributed immensely in understanding the epidemiological processes of malaria and examples drawn have shown that GIS is now widely used for research and decision making in malaria control. Statistical data analysis currently is the most consistent and established set of tools to analyze spatial datasets. The desired future development of GIS is in line with the utilization of geo-statistical tools which combined with high quality data has capability to provide new insight into malaria epidemiology and the complexity of its transmission potential in endemic areas.
Background In systems biology, and many other areas of research, there is a need for the interoperability of tools and data sources that were not originally designed to be integrated. Due to the interdisciplinary nature of systems biology, and its association with high throughput experimental platforms, there is an additional need to continually integrate new technologies. As scientists work in isolated groups, integration with other groups is rarely a consideration when building the required software tools. Results We illustrate an approach, through the discussion of a purpose built software architecture, which allows disparate groups to reuse tools and access data sources in a common manner. The architecture allows for: the rapid development of distributed applications; interoperability, so it can be used by a wide variety of developers and computational biologists; development using standard tools, so that it is easy to maintain and does not require a large development effort; extensibility, so that new technologies and data types can be incorporated; and non intrusive development, insofar as researchers need not to adhere to a pre-existing object model. Conclusion By using a relatively simple integration strategy, based upon a common identity system and dynamically discovered interoperable services, a light-weight software architecture can become the focal point through which scientists can both get access to and analyse the plethora of experimentally derived data. PMID:18578887
Through the use of assisted reproductive technologies (ARTs), multiple children are born adding to worldwide carbon emissions. Evaluating the ethics of offering reproductive services against its overall harm to the environment makes unregulated ARTs unjustified, yet the ART business can move towards sustainability as a part of the larger green bioethics movement. By integrating ecological ethos into the ART industry, climate change can be mitigated and the conversation about consumption can become a broader public discourse. Although the impact of naturally made children on the environment is undeniable, I will focus on the ART industry as an anthropogenic source of carbon emissions which lead to climate change. The ART industry is an often overlooked source of environmental degradation and decidedly different from natural reproduction as fertility centres provide a service for a fee and therefore can be subject to economic, policy and bioethical scrutiny. In this article, I will provide a brief background on the current state of human-driven climate change before suggesting two conservationist strategies that can be employed in the ART business. First, endorsing a carbon capping programme that limits the carbon emissions of ART businesses will be proposed. Second, I will recommend that policymakers eliminate funded ARTs for those who are not biologically infertile. I will conclude the article by urging policymakers and all those concerned with climate change to consider the effects of the reproductive technologies industry in light of climate change and move towards sustainability. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Personal projection is a new way to use projectors for gaming, entertainment or photo projection. The requirements for this new category have been defined based on market research with focus groups. A screen brightness of 200-300lm out of compact and affordable devices is a must. In order to reach this performance a very bright light source is at least as important as for professional projectors. The new 50W Ujoy lamp system with 1mm arc enables efficient projection systems. Lower cooling requirements, the potential for battery operation and the low voltage input makes it the ideal source for this new category of projectors.
NASA Mission Control Software for the Visualization of data has historically been closed, accessible only to small groups of flight controllers, often bound to a specific mission discipline such as flight dynamics, health and status or mission planning. Open Mission Control Technologies (MCT) provides new capability for NASA mission controllers and, by being fully open source, opens up NASA software for the visualization of mission data to broader communities inside and outside of NASA. Open MCT is the product of a design thinking process within NASA, using participatory design and design sprints to build a product that serves users.
Tazegul, Gokhan; Bozoglan, Humeyra; Ogut, Tahir S; Balcı, Mustafa K
2017-09-15
After the development of the first phone at the end of 19th century, communication technologies took a great leap forward in the 20th century. With the birth of the "smartphone" in the 21st century, communication technologies exponentially evolved and became an important part of our daily routine. Effective communications between clinicians is critical in medical care and miscommunications are a source of errors. Although telecommunication technologies have proliferated dramatically in the last decade, there is scarce evidence-based information on the use of this technology in medical care. For the purposes of medical communication, we can now consult each other about patients individually and within a group via instant messaging applications by using text messages, photos, audio messages and even videos. In this review, we examine the uses and drawbacks of instant messaging applications in medical communications.
Objectives To understand organisational technology adoption (initiation, adoption decision, implementation) by looking at the different types of innovation knowledge used during this process. Design Qualitative, multisite, comparative case study design. Setting One primary care and 11 acute care organisations (trusts) across all health regions in England in the context of infection prevention and control. Participants and data analysis 121 semistructured individual and group interviews with 109 informants, involving clinical and non-clinical staff from all organisational levels and various professional groups. Documentary evidence and field notes were also used. 38 technology adoption processes were analysed using an integrated approach combining inductive and deductive reasoning. Main findings Those involved in the process variably accessed three types of innovation knowledge: ‘awareness’ (information that an innovation exists), ‘principles’ (information about an innovation's functioning principles) and ‘how-to’ (information required to use an innovation properly at individual and organisational levels). Centralised (national, government-led) and local sources were used to obtain this knowledge. Localised professional networks were preferred sources for all three types of knowledge. Professional backgrounds influenced an asymmetric attention to different types of innovation knowledge. When less attention was given to ‘how-to’ compared with ‘principles’ knowledge at the early stages of the process, this contributed to 12 cases of incomplete implementation or discontinuance after initial adoption. Conclusions Potential adopters and change agents often overlooked or undervalued ‘how-to’ knowledge. Balancing ‘principles’ and ‘how-to’ knowledge early in the innovation process enhanced successful technology adoption and implementation by considering efficacy as well as strategic, structural and cultural fit with the organisation's context. This learning is critical given the policy emphasis for health organisations to be innovation-ready. PMID:22492183
This thesis addresses the public perception of the risk of a technology not widely known to laypeople. Its aims were (1) to characterize public perceptions of the risk of using nuclear energy in space and decisions related to this risk, and (2) to extend the 'mental model' methodology to studying public perception of unfamiliar, risky technologies. A model of the physical processes capable of creating risks from using nuclear energy sources in space was first constructed. Then, knowledge and beliefs related to this topic were elicited from three different groups of people. The generality of the findings was examined in a constructive replication with environmentally-oriented people. The possibility of involving the public in decision-making processes related to engineering macro-design was then investigated. Finally, a communication regarding these risk processes was developed and evaluated in an experiment comparing it with communications produced by NASA. Although they included large portions of the expert model, people's beliefs also had gaps and misconceptions. Respondents often used scientific terms without a clear understanding of what they meant. Respondents' mental models sometimes contained scattered and inconsistent entries. The impact of pre-existing mental models was clearly seen. Different groups of people had different patterns of knowledge and beliefs. Nevertheless, respondents expressed reasonable and coherent opinions on choices among engineering options. The CMU brochure, derived from the study of readers' existing mental models, provided a better risk communication tool than NASA's material, reflecting primarily experts' perspective. The better performance of subjects reading either brochure generally reflected adding knowledge on issues that they had not previously known, rather than correcting wrong beliefs. The communication study confirmed a hypothesis that improving knowledge on risk processes related to the use of a technology causes a more favorable attitude towards that technology. Recommendations related to the design and targeting of risk communication, and to public participation in decision-making on using new and risky technologies, are derived. Additional studies that will elicit laypeople's definitions of risk related to specific technologies, and link their detailed understanding of risk-development processes to the perceived dimensions of risk, are suggested.
Horne, Stephen F.; Partlow, Matthew J.; Gustafson, Deborah S.; Besen, Matthew M.; Smith, Donald K.; Blackborow, Paul A.
2012-03-01
Energetiq Technology has been shipping the EQ-10 Electrodeless Z-pinchTM light source since 1995. The source is currently being used for metrology, mask inspection, and resist development. Energetiq's higher brightness source has been selected as the source for pre-production actinic mask inspection tools. This improved source enables the mask inspection tool suppliers to build prototype tools with capabilities of defect detection and review down to 16nm design rules. In this presentation we will present new source technology being developed at Energetiq to address the critical source brightness issue. The new technology will be shown to be capable of delivering brightness levels sufficient to meet the HVM requirements of AIMS and ABI and potentially API tools. The basis of the source technology is to use the stable pinch of the electrodeless light source and have a brightness of up to 100W/mm(carat)2-sr. We will explain the source design concepts, discuss the expected performance and present the modeling results for the new design.
Lippincott, M.; Lewis, E. S.; Gehrke, G. E.; Wise, A.; Pyle, S.; Sinatra, V.; Bland, G.; Bydlowski, D.; Henry, A.; Gilberts, P. A.
2016-12-01
Community groups are interested in low-cost sensors to monitor their environment. However, many new commercial sensors are unknown devices without peer-reviewed evaluations of data quality or pathways to regulatory acceptance, and the time to achieve these outcomes may be beyond a community's patience and attention. Rather than developing a device from scratch or validating a new commercial product, a workflow is presented whereby existing technologies, especially those that are out of patent, are replicated through open online collaboration between communities affected by environmental pollution, volunteers, academic institutions, and existing open hardware and open source software projects. Technology case studies will be presented, focusing primarily on a passive PM monitor based on the UNC Passive Monitor. Stages of the project will be detailed moving from identifying community needs, reviewing existing technology, partnership development, technology replication, IP review and licensing, data quality assurance (in process), and field evaluation with community partners (in process), with special attention to partnership development and technology review. We have leveraged open hardware and open source software to lower the cost and access barriers of existing technologies for PM10-2.5 and other atmospheric measures that have already been validated through peer review. Existing validation of and regulatory familiarity with a technology enables a rapid pathway towards collecting data, shortening the time it takes for communities to leverage data in environmental management decisions. Online collaboration requires rigorous documentation that aids in spreading research methods and promoting deep engagement by interested community researchers outside academia. At the same time, careful choice of technology and the use of small-scale fabrication through laser cutting, 3D printing, and open, shared repositories of plans and software enables educational engagement that broadens a project's reach.
There is an urgency to advancing wastewater technologies due to aging water infrastructure and emerging regulations. A crosscutting working group proposes a conceptual design for a test bed network to understand and evaluate wastewater technologies to drive acceptance and deployment of new technologies to enhance performance. The working group includes contributors from the U.S. Department of Energy, the U.S. Environmental Protection Agency, the U.S. National Science Foundation, and the Water Research Foundation (formerly known as the Water Environment & Reuse Foundation). In “The Water-Energy Nexus: Challenges and Opportunities” (June 2014), the U.S. Department of Energy identified key issues with water-energymore » interdependencies and identified water resource recovery (broadly referred to as “wastewater management” or “sewage treatment”) as a locus of opportunities to improve energy and water security. Traditional sewage treatment uses more than 30 billion kWh per year, almost one percent of our electricity supply (EPRI 2013), and energy use grew 74 percent from 1996 to 2011 (Tarallo 2014). Wastewater is a potential alternative source to address water scarcity. In addition, wastewater contains valuable energy, nutrient, and mineral resources. Traditional sewage treatment does not recover water or other resources. With improved technology and design, reclaimed wastewater could supplement existing water supplies and mitigate water stress. The energy (biogas and heat), nutrients (primarily nitrogen and phosphorus), and minerals in wastewater could displace fossil sources, reduce America’s dependence on imported energy, and reduce greenhouse gas emissions. If fully implemented, resource recovery would reduce discharges to the environment and provide ecosystem services. The primary role of both public and private wastewater facilities is to reduce risk to human health and the environment. The institutional driver is to meet regulatory requirements. Capital budgets and revenue from taxes and services are limited at wastewater utilities, reducing the ability to invest in innovation. Therefore, utilities are very risk averse and slow to adopt new technologies that go beyond their traditional historical mandate.« less
Axelson, Christian; Wårdh, Inger; Strender, Lars-Erik; Nilsson, Gunnar
2007-09-01
The emergence of mobile computing could have an impact on how junior doctors learn. To exploit this opportunity it is essential to understand their information seeking process. To explore junior doctors' experiences of using medical knowledge sources on handheld computers. Interviews with five Swedish junior doctors. A qualitative manifest content analysis of a focus group interview followed by a qualitative latent content analysis of two individual interviews. A focus group interview showed that users were satisfied with access to handheld medical knowledge sources, but there was concern about contents, reliability and device dependency. Four categories emerged from individual interviews: (1) A feeling of uncertainty about using handheld technology in medical care; (2) A sense of security that handhelds can provide; (3) A need for contents to be personalized; (4) A degree of adaptability to make the handheld a versatile information tool. A theme was established to link the four categories together, as expressed in the Conclusion section. Junior doctors' experiences of using medical knowledge sources on handheld computers shed light on the need to decrease uncertainty about clinical decisions during medical internship, and to find ways to influence the level of self-confidence in the junior doctor's process of decision-making.
Protection of military aircraft from IR guided threats is paramount to ensure the survivability of aircrews, platforms, and to ensure mission success. At the foundation of all IRCM systems is the source; that component that provides the in-band radiant energy required for threat defeat. As such, source technology has evolved with IRCM technology to encompass the evolving systems architectures that encompass IRCM: 1) "Hot Brick" omni-directional sources; 2) arc lamps, and; 3) lasers. Lasers, as IRCM sources continue to evolve to meet the challenges of ever-evolving threats, superior techniques, economy of installation, and superior source technology. Lasers represent the single greatest advance in IRCM source technology and continue to evolve to meet ever more sophisticated threats. And have been used with great effect in all modern IRCM systems; evolving from frequency doubled CO2 lasers, to solid state lasers with OPOs, to semiconductor lasers including Quantum Cascade Lasers (QCLs); these last devices represent the latest advance in IRCM source technology offering all-band coverage, architectural simplicity, and economy of scale. While QCLs represent the latest advance in IRCM laser technology, fiber lasers show much promise in addressing multi-band operation as well as the ability to be coherently combined to achieve even greater output capability. Also, ultra-short pulse lasers are evolving to become practical for IRCM applications. Stay tuned ......
Santos, Sherie Lou Zara; Tagai, Erin K; Scheirer, Mary Ann; Bowie, Janice; Haider, Muhiuddin; Slade, Jimmie; Wang, Min Qi; Holt, Cheryl L
2017-03-14
Use of technology is increasing in health promotion and has continued growth potential in intervention research. Guided by the Reach, Effectiveness, Adoption, Implementation, and Maintenance (RE-AIM) framework, this paper reports on the adoption, reach, and implementation of Project HEAL (Health through Early Awareness and Learning)-a community-based implementation trial of a cancer educational intervention in 14 African American churches. We compare adoption, reach, and implementation at the organizational and participant level for churches in which lay peer community health advisors (CHAs) were trained using traditional classroom didactic methods compared with a new online system. Fifteen churches were randomized to one of two study groups in which two CHAs per church were trained through either classroom ("Traditional"; n = 16 CHAs in 8 churches) or web-based ("Technology"; n = 14 CHAs in 7 churches) training methods. Once trained and certified, all CHAs conducted a series of three group educational workshops in their churches on cancer early detection (breast, prostate, and colorectal). Adoption, reach, and implementation were assessed using multiple data sources including church-level data, participant engagement in the workshops, and study staff observations of CHA performance. The project had a 41% overall adoption rate at the church level. In terms of reach, a total of 375 participants enrolled in Project HEAL-226 participants in the Traditional group (43% reach) and 149 in the Technology group (21% reach; p < .10). Implementation was evaluated in terms of adherence, dosage, and quality. All churches fully completed the three workshops; however, the Traditional churches took somewhat longer (M = 84 days) to complete the workshop series than churches in the Technology group (M = 64 days). Other implementation outcomes were comparable between both the Traditional and Technology groups (p > .05). Overall, the Project HEAL intervention had reasonable adoption, though reach could have been better. Implementation was strong across both study groups, suggesting the promise of using web-based methods to disseminate and implement evidence-based interventions in faith-based settings and other areas where community health educators work to eliminate health disparities.
The availability and sustainable supply of technology metals and valuable elements is critical to the global economy. There is a growing realization that the development and deployment of the clean energy technologies and sustainable products and manufacturing industries of the 21st century will require large amounts of critical metals and valuable elements including rare-earth elements (REEs), platinum group metals (PGMs), lithium, copper, cobalt, silver, and gold. Advances in industrial ecology, water purification, and resource recovery have established that seawater is an important and largely untapped source of technology metals and valuable elements. This feature article discusses the opportunities and challenges of mining critical metals and elements from seawater. We highlight recent advances and provide an outlook of the future of metal mining and resource recovery from seawater.
... performance standards reflecting the best available demonstrated control technology (NSPS). Any new source... 40 Protection of Environment 30 2011-07-01 2011-07-01 false New source performance standards reflecting the best available demonstrated control technology (NSPS). 450.24 Section 450.24 Protection of...
... performance standards reflecting the best available demonstrated control technology (NSPS). Any new source... 40 Protection of Environment 29 2010-07-01 2010-07-01 false New source performance standards reflecting the best available demonstrated control technology (NSPS). 450.24 Section 450.24 Protection of...
The US neutrino community gathered at the Workshop on the Intermediate Neutrino Program (WINP) at Brookhaven National Laboratory February 4-6, 2015 to explore opportunities in neutrino physics over the next five to ten years. Scientists from particle, astroparticle and nuclear physics participated in the workshop. The workshop examined promising opportunities for neutrino physics in the intermediate term, including possible new small to mid-scale experiments, US contributions to large experiments, upgrades to existing experiments, R&D plans and theory. The workshop was organized into two sets of parallel working group sessions, divided by physics topics and technology. Physics working groups covered topicsmore » on Sterile Neutrinos, Neutrino Mixing, Neutrino Interactions, Neutrino Properties and Astrophysical Neutrinos. Technology sessions were organized into Theory, Short-Baseline Accelerator Neutrinos, Reactor Neutrinos, Detector R&D and Source, Cyclotron and Meson Decay at Rest sessions.This report summarizes discussion and conclusions from the workshop.« less
Throughout Northern Appalachia and surrounding regions, hundreds of abandoned mine sites exist which frequently are the source of Acid Mine Drainage (AMD). AMD typically contains metal ions in solution with sulfate ions which have been leached from the mine. These large volumes of water, if treated to a minimum standard, may be of use in Hydraulic Fracturing (HF) or other industrial processes. This project’s focus is to evaluate an AMD water treatment technology for the purpose of providing treated AMD as an alternative source of water for HF operations. The HydroFlex™ technology allows the conversion of a previous environmental liabilitymore » into an asset while reducing stress on potable water sources. The technology achieves greater than 95% water recovery, while removing sulfate to concentrations below 100 mg/L and common metals (e.g., iron and aluminum) below 1 mg/L. The project is intended to demonstrate the capability of the process to provide AMD as alternative source water for HF operations. The second budget period of the project has been completed during which Battelle conducted two individual test campaigns in the field. The first test campaign demonstrated the ability of the HydroFlex system to remove sulfate to levels below 100 mg/L, meeting the requirements indicated by industry stakeholders for use of the treated AMD as source water. The second test campaign consisted of a series of focused confirmatory tests aimed at gathering additional data to refine the economic projections for the process. Throughout the project, regular communications were held with a group of project stakeholders to ensure alignment of the project objectives with industry requirements. Finally, the process byproduct generated by the HydroFlex process was evaluated for the treatment of produced water against commercial treatment chemicals. It was found that the process byproduct achieved similar results for produced water treatment as the chemicals currently in use. Further, the process byproduct demonstrated better settling characteristics in bench scale testing. The field testing conducted in the second project budget period demonstrated the ability of the HydroFlex technology to meet industry requirements for AMD water chemical composition so that it can be used as source water in HF activities. System and operational improvements were identified in an additional series of confirmatory tests to achieve competitive cost targets. Finally, the application of the HydroFlex process byproduct in produced water treatment was demonstrated, further supporting the commercial implementation of the technology. Overall, the project results demonstrate a path to the economic treatment of AMD to support its increased use as source water in HF, particularly in regions with limited local freshwater availability.« less
In support of the International Year of Astronomy New Media Task Group's mission to create online astronomy content, several existing technologies are being leveraged. With this undertaking in mind, Google Sky provides an immersive contextual environment for both exploration and content presentation. As such, it affords opportunities for new methods of interactive media delivery. Traditional astronomy news sources and blogs are able to literally set a story at the location of their topic. Furthermore, audio based material can be complimented by a series of locations in the form of a guided tour. In order to provide automated generation and management of this content, an open source software suite has been developed.
Briscoe, Gregory W; Fore Arcand, Lisa G; Lin, Terence; Johnson, Joel; Rai, Aanmol; Kollins, Kevin
2006-01-01
This pilot study provides firsthand feedback from medical students and residents in training regarding their perceptions of technology in medicine. The authors distributed an e-mail invitation to an anonymous Web-based survey to medical students and residents in two different U.S. training institutions. Respondents unanimously expressed that technology skills were important in medical training and felt it most important to learn about electronic medical records and accessing scientific information on the Internet. At the point of patient care, trainees' preferred reference sources were the Internet and PDA, in that order. Most clinical trainees felt PDAs were critical in patient care and met their clinical needs, and they were most likely to use them for medication reference. The majority of trainees preferred printed media over digital media for initial learning, but the converse for referencing. Instructor-led small groups were viewed as the best environment in which to receive instruction. Trainees in medical education are technologically savvy and provide invaluable feedback regarding initiation, development and refinement of technological systems in medical training.
TEERM focuses its validation efforts on technologies that have shown promise in laboratory testing, but lack testing under realistic or field environment. Mature technologies have advantages over those that are still in the developmental stage such as being more likely to be transitioned into a working environment. One way TEERM begins to evaluate the suitability of technologies is through Technology Readiness Levels (TRLs). TRLs are a systematic metric/measurement system that supports assessments of the maturity of a particular technology and the consistent comparison of maturity between different types of technology. TEERM generally works on demonstrating/validating alternatives that fall within TRLs 5-9. In instances where a mature technology does not exist for a particular Agency application, TEERM works with technology development groups and programs such as NASA's Innovative Partnerships Program (IPP). The IPP's purpose is to identify and document available technologies in light of NASA's needs, evaluate and prioritize those technologies, and reach out to find new partners. All TEERM projects involve multiple partners. Partnering reduces duplication of effort that otherwise might occur if individuals worked their problems alone. Partnering also helps reduce individual contributors' shares of the total cost of technology validation. Through collaboration and financial commitment from project stakeholders and third-party sources, it is possible to fully fund expensive demonstration/validation efforts.
The physician remains the primary referral source in medical service. Referral patterns, in turn, reflect interactions between referring physicians and consultants which relate to quality of care, costs, and personal factors such as age and common training. Referrals initiated by patients relate to the desire to seek a second opinion and are heavily influenced by other family members. Alterations in the referral process are emerging due to cost escalation, the emergence of large payor groupings and aggregation of physicians into larger group settings. Strategies to manage the referral process include enhanced communications using new telecommunication technology and joint ventures with hospitals.
is found in IJI-V quantum cascade lasers (QCLs). 1.I Brief overview of 5i-based QCL development Various groups have obtained electroluminescence from...sources and detectors of far-IR radiation in the range of 12-30 flm. These devices, especially quantum cascade lasers (QCLs) require efficient ...elements and their alloys that can be developed on Si substrates. The design work focused on the structure of the so-called quantum cascade laser
... construction or reconstruction of major sources. 63.42 Section 63.42 Protection of Environment ENVIRONMENTAL... POLLUTANTS FOR SOURCE CATEGORIES Requirements for Control Technology Determinations for Major Sources in... achievable control technology emission limitation for new sources. [61 FR 68400, Dec. 27, 1996, as amended at...
Governments and businesses are increasingly using the internet and mobile telephones to disseminate information about services and products. However, not all population groups have the resources and capabilities to support equality of access to and use of these technologies. While Australia's ageing population receives attention in a wide variety of literatures, the ageing migrant population has received very little attention in relation to understanding their place in the 'digital divide'. It is not known how this group gathers information used in everyday living, or what role the internet or mobile phones plays within this. At a time when the population is ageing and there is an increasing use of the internet to deliver services and information, there is little research on the effects of ethnicity, migration, socio-economic status, education or gender of older people on the use of information and communication technology (ICT). Addressing this should be a priority in Australia, which has an old and ageing population that includes many post-war migrants from non-English speaking European countries. To analyse the views of older migrants living in South Australia with respect to their current information sources, their use of ICT and any barriers and enablers to future use of ICT for accessing health information. A qualitative study employing eight focus groups involving 43 older Italian and Greek migrants living in the community in metropolitan or regional settings in South Australia. Interviews were held and audio-recorded and the English language components transcribed. Transcriptions were analysed manually using a grounded theory approach. Older migrants do not use ICT to a great extent to access information in their everyday lives, with many expressing no interest in learning how to do so. However, they access the information they need to function in society with a desired quality of life from multiple sources by various means. Sources include electronic and print media from Australia and their home countries, family and acquaintances, government departments or service providers. Many expressed a preference for receiving information as printed material or directly from another person. Governments or primary healthcare organisations planning to make health information solely available via ICT should be aware that doing so may lead to an increase in 'information exclusion' and the formation of functional knowledge deficits for older migrants. At the moment at least, our participants do not perceive any functional knowledge deficits as they engage multiple sources to access the information they need for everyday life. We recommend that governments and healthcare organisations evaluate the appropriateness of using ICT to directly provide information to older migrants and consider non-digital means or the engagement of 'information brokers' when communicating with groups identified as low or non-users of ICT.
This report covers the progress of the Michigan Technological University particle astrophysics group during the period April 15th, 2011 through April 30th, 2014. The principal investigator is Professor David Nitz. Professor Brian Fick is the Co-PI. The focus of the group is the study of the highest energy cosmic rays using the Pierre Auger Observatory. The major goals of the Pierre Auger Observatory are to discover and understand the source or sources of cosmic rays with energies exceeding 10**19 eV, to identify the particle type(s), and to investigate the interactions of those cosmic particles both in space and in themore » Earth's atmosphere. The Pierre Auger Observatory in Argentina was completed in June 2008 with 1660 surface detector stations and 24 fluorescence telescopes arranged in 4 stations. It has a collecting area of 3,000 square km, yielding an aperture of 7,000 km**2 sr.« less
The article presents the results of the eco-balance analysis of the disused lead-acid batteries recycling process. Test-dedicated technology offers the possibility to recover other elements, for example, polypropylene of the battery case or to obtain crystalline sodium sulphate. The life cycle assessment was made using ReCiPe and IMPACT2002 + methods. The results are shown as environmental points [Pt]. The results are shown in the environmental categories, specific for each of the methods grouped in the impact categories. 1 Mg of the processed srap was a dopted as the functional unit. The results of the analyses indicate that recycling processes may provide the environmental impact of recycling technology less harmful. Repeated use of lead causes that its original sources are not explored. Similarly, the use of granule production-dedicated polypropylene extracted from battery casings that are used in the plastics industry, has environmental benefits. Due to the widespread use of lead-acid batteries, the attention should be paid to their proper utilization, especially in terms of heavy metals, especially lead. According to the calculations, the highest level of environmental benefits from the use of lead from secondary sources in the production of new products, was observed in the refining process.
This article begins by explaining the concepts of proprietary and open source software technology, which are now competing in the marketplace. A review of recent individual and cooperative technology development and public policy advocacy efforts, by both proponents of open source software and advocates of proprietary software, subsequently…
... 40 Protection of Environment 10 2013-07-01 2013-07-01 false Maximum achievable control technology (MACT) determinations for affected sources subject to case-by-case determination of equivalent emission... Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air Act Sections...
... 40 Protection of Environment 10 2012-07-01 2012-07-01 false Maximum achievable control technology (MACT) determinations for affected sources subject to case-by-case determination of equivalent emission... Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air Act Sections...
... 40 Protection of Environment 9 2011-07-01 2011-07-01 false Maximum achievable control technology (MACT) determinations for affected sources subject to case-by-case determination of equivalent emission... Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air Act Sections...
... 40 Protection of Environment 10 2014-07-01 2014-07-01 false Maximum achievable control technology (MACT) determinations for affected sources subject to case-by-case determination of equivalent emission... Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air Act Sections...
Dundar, Y; Dodd, S; Dickson, R; Walley, T; Haycox, A; Williamson, P R
2006-02-01
To assess the extent of use of data from conference abstracts and presentations in health technology assessments (HTAs) provided as part of the National Institute for Health and Clinical Excellence (NICE) appraisal process. Also to assess the methodological quality of trials from conference abstracts and presentations, the consistency of reporting major outcomes between these sources and subsequent full-length publications, the effect of inclusion or exclusion of data from these sources on the meta-analysis pooled effect estimates, and the timeliness of availability of data from these sources and full articles in relation to the development of technology assessment reviews (TARs). A survey of seven TAR groups. An audit of published TARs: included all NICE TARs published between January 2000 and October 2004. Case studies of selected TARs. Analyses of the results of the survey and audit were presented as a descriptive summary and in a tabular format. Sensitivity analyses were carried out to compare the effect of inclusion of data from abstracts and presentations on the meta-analysis pooled effect estimates by including data from both abstracts/presentations and full papers, and data from only full publications, included in the original TAR. These analyses were then compared with meta-analysis of data from trials that have subsequently been published in full. All seven TAR groups completed and returned the survey. Five out of seven groups reported a general policy that included searching for and including studies available as conference abstracts/presentations. Five groups responded that if they included data from these sources they would carry out methodological quality assessment of studies from these sources using the same assessment tools as for full publications, and manage the data from these sources in the same way as fully published reports. All groups reported that if relevant outcome data were reported in both an abstract/presentation and a full publication, they would only consider the data in the full publication. Conversely, if data were only available in conference abstract/presentation, all but two groups reported that they would extract and use the data from the abstract/presentation. In total, 63 HTA reports for NICE were identified. In 20 of 63 TARs (32%) explicit statements were made with regards to inclusion and assessment of data from abstracts/presentations. Thirty-eight (60%) identified at least one randomised controlled trial (RCT) available as a conference abstract or presentation. Of these, 26 (68%) included trials available as abstracts/presentations. About 80% (20/26) of the 26 TARs that included RCTs in abstract/presentation form carried out an assessment of the methodological quality of such trials. In 16 TARs full reports of these trials were used for quality assessment where both abstracts/presentations and subsequent full publications were available. Twenty-three of 63 TARs (37%) carried out a quantitative analysis of results. Of these, ten (43%) included trials that were available as abstracts/presentations in the review; however, only 60% (6/10) of these included data from abstracts/presentations in the data analysis of results. Thirteen TARs evaluated rapidly evolving technologies and only three of these identified and included trial data from conference abstracts/presentations and carried out a quantitative analysis where abstract/presentation data were used. These three TARs were used as case studies. In all three case studies the overall quality of reporting in abstracts/presentations was generally poor. In all case studies abstracts and presentations failed to describe the method of randomisation or allocation concealment. Overall, there was no mention of blinding in 66% (25/38) of the abstracts and in 26% (7/27) of the presentations included in case studies, and one presentation (4%) explicitly stated use of intention-to-treat analysis. Results from one case study demonstrated discrepancies in data made available in abstracts or online conference presentations. Not only were discrepancies evident between these sources, but also comparison of conference abstracts/presentations with subsequently published full-length articles demonstrates data discrepancies in reporting of results. Sensitivity analyses based on one case study indicated a change in significance of effect in two outcome measures when only full papers published to date were included. There are variations in policy and practice across TAR groups regarding searching for and inclusion of studies available as conference abstracts/presentations. There is also variation in the level of detail reported in TARs regarding the use of abstracts/presentations. Therefore, TAR teams should be encouraged to state explicitly their search strategies for identifying conference abstracts and presentations, their methods for assessing these for inclusion, and where appropriate how the data were used and their effect on the results. Comprehensive searching for trials available as conference abstracts/presentations is time consuming and may be of questionable value. However, there may be a case for searching for and including abstract/presentation data if, for example, other sources of data are limited. If conference abstracts/presentations are to be included, the TAR teams need to allocate additional time for searching and managing data from these sources. Incomplete reporting in conference abstracts and presentations limits the ability of reviewers to assess confidently the methodological quality of trials. Where conference abstracts and presentations are considered for inclusion in the review, the TAR teams should increase their efforts to obtain further study details by contacting trialists. Where abstract/presentation data are included, reviewers should discuss the effect of including data from these sources. Any data discrepancies identified across sources in TARs should be highlighted and their impact discussed in the review. In addition, there is a need to carry out, for example, a sensitivity analysis with and without abstract/presentation data in the analysis. There is a need for research into the development of search strategies specific to identification of studies available as conference abstracts and presentations in TARs. Such strategies may include guidance with regard to identification of relevant electronic databases and appropriate conference sites relevant to certain clinical areas. As there are limited case studies included in this report, analyses should be repeated as more TARs accrue, or include the work of other international HTA groups.
Lord, Sarah E.; McGurk, Susan R.; Nicholson, Joanne; Carpenter-Song, Elizabeth A.; Tauscher, Justin S.; Becker, Deborah R.; Swanson, Sarah J.; Drake, Robert E.; Bond, Gary R.
2015-01-01
Topic The potential of technology to enhance delivery and outcomes of Individual Placement and Support (IPS) supported employment. Purpose IPS supported employment has demonstrated robust success for improving rates of competitive employment among individuals with psychiatric disabilities. Still, a majority of those with serious mental illnesses are not employed (Bond, Drake, & Becker, 2012). The need to promote awareness of IPS and expand services is urgent. In this study, we describe ways that technologies may enhance delivery of IPS supported employment across the care continuum and stakeholder groups. Directions for research are highlighted. Sources Used published literature, clinical observations, IPS learning collaborative. Conclusions and Implications for Practice Technology has the potential to enhance direct service as well as workflow in the IPS supported employment process, which may lead to improved fidelity and client outcomes. Mobile and cloud technologies open opportunities for collaboration, self-directed care, and ongoing support to help clients obtain and maintain meaningful employment. Research is needed to evaluate efficacy of technology-based approaches for promoting client employment outcomes, to identify provider and organization barriers to using technology for IPS delivery, and to determine effective strategies for implementing technology with IPS in different settings and with diverse client audiences. PMID:24912058
Knapp, Jennifer; Macdonald, Michael; Malone, David; Hamon, Nicholas; Richardson, Jason H
2015-09-26
Malaria vector control technology has remained largely static for decades and there is a pressing need for innovative control tools and methodology to radically improve the quality and efficiency of current vector control practices. This report summarizes a workshop jointly organized by the Innovative Vector Control Consortium (IVCC) and the Armed Forces Pest Management Board (AFPMB) focused on public health pesticide application technology. Three main topics were discussed: the limitations with current tools and techniques used for indoor residual spraying (IRS), technology innovation to improve efficacy of IRS programmes, and truly disruptive application technology beyond IRS. The group identified several opportunities to improve application technology to include: insuring all IRS programmes are using constant flow valves and erosion resistant tips; introducing compression sprayer improvements that help minimize pesticide waste and human error; and moving beyond IRS by embracing the potential for new larval source management techniques and next generation technology such as unmanned "smart" spray systems. The meeting served to lay the foundation for broader collaboration between the IVCC and AFPMB and partners in industry, the World Health Organization, the Bill and Melinda Gates Foundation and others.
... 4A003. (2) Technology and software. License Exception APP authorizes exports of technology and software... programmability. (ii) Technology and source code. Technology and source code eligible for License Exception APP..., reexports and transfers (in-country) for nuclear, chemical, biological, or missile end-users and end-uses...
This is a qualitative study about sources of self-efficacy and roles of assistive technologies (AT) associated with the science, technology, engineering and mathematics (STEM) choice and participation of STEM professionals and graduate students with sensory and orthopedic disabilities. People with disabilities are underrepresented in STEM, which can be traced back along the STEM pipeline to early undergraduate participation in STEM. Little research exists, however, about pathways and factors associated with successful STEM participation for people with disabilities at any point along their trajectories. Eighteen STEM professionals and graduate students with sensory and orthopedic disabilities were interviewed for this study. Sources of self-efficacy were sought from interview transcripts, as were emergent themes associated with the types, uses and roles of AT. Findings suggest that people with sensory and orthopedic disabilities weigh sources of self-efficacy differently from white males without disabilities in STEM and more like other underrepresented minorities in STEM. Social persuasions were most frequently reported and in far more detail than other sources, suggesting that this source may be most impactful in the development of self-efficacy beliefs for this group. Additionally, findings indicate that AT is critical to the successful participation of people with sensory and orthopedic disabilities in STEM at all points along their STEM pathways. Barriers center around issues of access to full engagement in mainstream STEM classrooms and out of school opportunities as well as the impact of ill-informed perceptions about the capabilities of people with disabilities held by parents, teachers and college faculty who can act as gatekeepers along STEM pathways. Gaps in disability specialists' knowledge about STEM-specific assistive technologies, especially at the college level, are also problematic. The prevalence of mainstream public school attendance reported by participants indicates that classroom teachers and disability-related educators have important roles in providing access to STEM mastery experiences as well as providing positive support and high expectations for students with disabilities. STEM and disability-based networks served to provide participants with role models, out of school STEM learning experiences and important long-term social connections in STEM communities.
This article offers a systematically organized series of questions to identify funding sources for assistive technology for students with disabilities. A decision tree links the questions with funding sources. (DB)
This project was part of a collaborative campaign, including the participation of scientists from seven research groups as part of the Winter Intensive Operating Period (January-February 2012) of the Clean Air for London (ClearfLo) campaign at a rural site in Detling, UK, 45 km southeast of central London to study wintertime sources of urban particulate matter. The UW contribution by PI Thornton’s group was to make the first deployment of a chemical ionization mass spectrometer instrument (MOVI-CI-ToFMS) to measure both particle and gas phase organic acids. The new instrument ran nearly continuously during the ClearfLo WINTER IOP at the Detlingmore » site, producing a first-ever data set of molecular composition information that can be used for source apportionment and process studies. The UW group published a paper in Environmental Science and Technology and contributed to another (Bohnenstengel et al BAMS 2015) detailing a direct molecular connection between biomass/biofuel burning particles and aerosol light absorption. The ES&T paper (Mohr, et al ES&T 2013) has received 42 citations in just 3 years indicative of its significant impact on the field. These measurements of urban and rural aerosol properties will contribute to improved modeling of regional aerosol emissions, and of atmospheric aging and removal.« less
... 4A003. (2) Technology and software. License Exception APP authorizes exports of technology and software... License Exception. (2) Access and release restrictions. (i)[Reserved] (ii) Technology and source code. Technology and source code eligible for License Exception APP may not be released to nationals of Cuba, Iran...
Most research on earnings inequality has focused on the growing gap between workers of different races and at different education, age, and income levels, but a large portion of the increasing inequality has actually occurred within these groups. This article focuses on the extent and sources of "within-group" wage inequality in more than 500 labor markets in the United States in 1990. In addition to documenting that within-group wage inequality across regions varies more widely today than over the past several decades, the analysis reveals that two frequently cited explanations of rising wage inequality over time have little impact on within-group wage inequality when measured at the local labor market level: (1) industrial shifts and (2) increased technology and trade. By contrast, flexible and insecure employment conditions (e.g., unemployment, contingent work, and immigration) are associated strongly with high local levels of within-group wage inequality, especially among women.
This project developed and studied The Source, an alternate reality game (ARG) designed to foster interest and knowledge related to science, technology, engineering, and math (STEM) among youth from populations underrepresented in STEM fields. ARGs are multiplayer games that engage participants across several media such as shared websites, social media, personal communications, and real-world settings to complete activities and collaborate with team members. The Source was a five-week summer program with 144 participants from Chicago aged 13 to 18 years. The Source incorporated six socio-contextual factors derived from three frameworks: Chang's (ERIC Digest, 2002) recommendations for engaging underrepresented populations in STEM careers, Lave and Wenger's (Cambridge University Press, 1991) situated learning model, and Barron's (Human Development, 49(4); 193-224, 2006) learning ecology perspective. These factors aligned with the program's aims of promoting (1) social community and peer support, (2) collaboration and teamwork, (3) real-world relevance and investigative learning, (4) mentoring and exposure to STEM professionals, (5) hands-on activities to foster transferable skill building, and (6) interface with technology. This paper presents results from 10 focus groups and 10 individual interviews conducted with a subset of the 144 youth participants who completed the game. It describes how these six factors were realized through The Source and uses them as a lens for considering how The Source functioned pedagogically. Qualitative findings describe youth's perception of The Source's potential influence on STEM interest, engagement, and identity formation. Despite limitations, study results indicate that underrepresented youth can engage in an immersive, narrative, and game-based experience as a potential mechanism for piquing and developing STEM interest and skills, particularly among underrepresented youth.
around those situations. These types of sources, however, yield an even more massive quantity of content that is almost exclusively textual and...intelligence gaps with respect to the data saved for people, places, groups, and regions that have been stored in the system with respect to required entity...and maize products are being distributed in affected areas, thus ensuring that each person receives 1500 calories of food per day. Sentiment data
The gain in interferometric resolution of extragalactic sources at radio frequencies which can be achieved by placing a very long baseline interferometry (VLBI) antenna in space is quantitatively described and a VLBI demonstration experiment using a large deployable antenna, which if realized could be a very acceptable first venture for VLBI in space is discussed. A tutorial on VLBI, a summary of the technology available for the experiment, and a preliminary mission scenario are included.
This article presents an interview with Jim Hirsch, an associate superintendent for technology at Piano Independent School District in Piano, Texas. Hirsch serves as a liaison for the open technologies committee of the Consortium for School Networking. In this interview, he shares his opinion on the significance of open source in K-12.
In 1992, NASA and the U.S. Department of Defense jointly commissioned the research and development of a technology solution to address the challenges and requirements of communicating with their spacecraft. The project yielded an international consortium composed of representatives from the space science community, industry, and academia. This group of experts developed a broad suite of protocols specifically designed for space-based communications, known today as Space Communications Protocol Standards (SCPS). Having been internationally standardized by the Consultative Committee on Space Data Systems and the International Standards Organization, SCPS is distributed as open source technology by NASA s Jet Propulsion Laboratory (JPL). The protocols are used for every national space mission that takes place today.
Driven by the need for new compounds to serve as biological probes and leads for therapeutic development and the growing accessibility of DNA technologies including high-throughput sequencing, many academic and industrial groups have begun to use DNA-encoded chemical libraries as a source of bioactive small molecules. In this review, we describe the technologies that have enabled the selection of compounds with desired activities from these libraries. These methods exploit the sensitivity of in vitro selection coupled with DNA amplification to overcome some of the limitations and costs associated with conventional screening methods. In addition, we highlight newer techniques with the potential to be applied to the high-throughput evaluation of DNA-encoded chemical libraries. PMID:25723146
The objective of this study was to determine the possibility of using molecular spectroscopy with multivariate technique as a fast method to detect the source effects among original feedstock sources of wheat and their corresponding co-products, wheat DDGS, from bioethanol production. Different sources of the bioethanol feedstock and their corresponding bioethanol co-products, three samples per source, were collected from the same newly-built bioethanol plant with current bioethanol processing technology. Multivariate molecular spectral analyses were carried out using agglomerative hierarchical cluster analysis (AHCA) and principal component analysis (PCA). The molecular spectral data of different feedstock sources and their corresponding co-products were compared at four different regions of ca. 1800-1725 cm-1 (carbonyl Cdbnd O ester, mainly related to lipid structure conformation), ca. 1725-1482 cm-1 (amide I and amide II region mainly related to protein structure conformation), ca. 1482-1180 cm-1 (mainly associated with structural carbohydrate) and ca. 1180-800 cm-1 (mainly related to carbohydrates) in complex plant-based system. The results showed that the molecular spectroscopy with multivariate technique could reveal the structural differences among the bioethanol feedstock sources and among their corresponding co-products. The AHCA and PCA analyses were able to distinguish the molecular structure differences associated with chemical functional groups among the different sources of the feedstock and their corresponding co-products. The molecular spectral differences indicated the differences in functional, biomolecular and biopolymer groups which were confirmed by wet chemical analysis. These biomolecular and biopolymer structural differences were associated with chemical and nutrient profiles and nutrient utilization and availability. Molecular spectral analyses had the potential to identify molecular structure difference among bioethanol feedstock sources and their corresponding co-products.
Agarwal, Rajat Kumar; Sedai, Amit; Dhimal, Sunil; Ankita, Kumari; Clemente, Luigi; Siddique, Sulman; Yaqub, Naila; Khalid, Sadaf; Itrat, Fatima; Khan, Anwar; Gilani, Sarah Khan; Marwah, Priya; Soni, Rajpreet; Missiry, Mohamed El; Hussain, Mohamed Hamed; Uderzo, Cornelio; Faulkner, Lawrence
2014-01-01
Jagriti Innovations developed a collaboration tool in partnership with the Cure2Children Foundation that has been used by health professionals in Italy, Pakistan, and India for the collaborative management of patients undergoing bone marrow transplantation (BMT) for thalassemia major since August 2008. This online open-access database covers data recording, analyzing, and reporting besides enabling knowledge exchange, telemedicine, capacity building, and quality assurance. As of February 2014, over 2400 patients have been registered and 112 BMTs have been performed with outcomes comparable to international standards, but at a fraction of the cost. This approach avoids medical emigration and contributes to local healthcare strengthening and competitiveness. This paper presents the experience and clinical outcomes associated with the use of this platform built using open-source tools and focusing on a locally pertinent tertiary care procedure-BMT. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Rozmovits, Linda; Mai, Helen; Chambers, Alexandra; Chan, Kelvin
2018-04-01
Objectives While there is wide support for patient engagement in health technology assessment, determining what constitutes meaningful (as opposed to tokenistic) engagement is complex. This paper explores reviewer and payer perceptions of what constitutes meaningful patient engagement in the Pan-Canadian Oncology Drug Review process. Methods Qualitative interview study comprising 24 semi-structured telephone interviews. A qualitative descriptive approach, employing the technique of constant comparison, was used to produce a thematic analysis. Results Submissions from patient advocacy groups were seen as meaningful when they provided information unavailable from other sources. This included information not collected in clinical trials, information relevant to clinical trade-offs and information about aspects of lived experience such as geographic differences and patient and carer priorities. In contrast, patient submissions that relied on emotional appeals or lacked transparency about their own methods were seen as detracting from the meaningfulness of patient engagement by conflating health technology assessment with other functions of patient advocacy groups such as fundraising or public awareness campaigns, and by failing to provide credible information relevant to deliberations. Conclusions This study suggests that misalignment of stakeholder expectations remains an issue even for a well-regarded health technology assessment process that has promoted patient engagement since its inception. Support for the technical capacity of patient groups to participate in health technology assessment is necessary but not sufficient to address this issue fully. There is a fundamental tension between the evidence-based nature of health technology assessment and the experientially oriented culture of patient advocacy. Divergent notions of what constitutes evidence and how it should be used must also be addressed.
Sometimes referred to as regenerative life support systems, the concept includes an enclosed self-sufficient habitat that can independently support life for years on end. Such a system aims not only to produce its own food and water but to purify air and convert waste into useful byproducts. In the early 1990s, NASA was planning for an extended stay on Mars, and Bubenheim and his Ames colleagues were concentrating efforts on creating a complete ecological system to sustain human crewmembers during their time on the Red Planet. The main barrier to developing such a system, he says, is energy. Mars has no power plants, and a regenerative system requires equipment that runs on electricity to do everything from regulating humidity in the atmosphere to monitoring the quality of recycled water. The Ames group started looking at how to best make power on a planet that is millions of miles away from Earth and turned to a hybrid concept combining wind and solar power technologies. The reason was that Mars experiences frequent dust storms that can block nearly all sunlight. When theres a dust storm and the wind is blowing, the wind system could be the dominant power source. When the wind is not blowing and the sun is out, photovoltaics could be the dominant source, says Bubenheim.To develop and test the wind power technology, Ames turned to a remote, harsh environment here on Earth: the South Pole. The South Pole was a really good analog for Mars, says Bubenheim. The technology features for going to Mars were the same technology features needed to make something work at the South Pole.Around the same time that NASA started investigating energy technologies for the Red Planet, the National Science Foundation (NSF) was working on a redesign of their station at the South Pole. To power its operations, NSF used fuel that it flew to the remote location, but the Foundation recognized the benefits of also using onsite renewable energy technologies. In the winter they have small crews and their power requirements are less, says Bubenheim. In the summers, they bring in larger groups and photovoltaics could supply a lot of power. Using renewable energy technology could be a way of reducing the amount of fuel they have to fly in.Technology TransferTo advance wind turbine technology to meet the requirements of extremely harsh environments like that on Mars, Ames partnered with NSF and the Department of Energy. It was clear that a lot of the same features were also desirable for the cold regions of the Earth, says Bubenheim. NASA took the leadership on the team because we had the longest-term technology a Mars turbine. Years before, NSF had worked with a company called Northern Power Systems (NPS), based in Barre, Vermont, to deploy a 3-kilowatt wind turbine on Black Island off the coast of Antarctica.Sometimes referred to as regenerative life support systems, the concept includes an enclosed self-sufficient habitat that can independently support life for years on end. Such a system aims not only to produce its own food and water but to purify air and convert waste into useful byproducts. In the early 1990s, NASA was planning for an extended stay on Mars, and Bubenheim and his Ames colleagues were concentrating efforts on creating a complete ecological system to sustain human crewmembers during their time on the Red Planet. The main barrier to developing such a system, he says, is energy. Mars has no power plants, and a regenerative system requires equipment that runs on electricity to do everything from regulating humidity in the atmosphere to monitoring the quality of recycled water. The Ames group started looking at how to best make power on a planet that is millions of miles away from Earth and turned to a hybrid concept combining wind and solar power technologies. The reason was that Mars experiences frequent dust storms that can block nearly all sunlight. When there's a dust storm and the wind is blowing, the wind system could be the dominant power source. When the wind is not blowing and the sun is out, photovoltaics could be the dominant source, says Bubenheim.To develop and test the wind power technology, Ames turned to a remote, harsh environment here on Earth: the South Pole. The South Pole was a really good analog for Mars, says Bubenheim. The technology features for going to Mars were the same technology features needed to make something work at the South Pole.Around the same time that NASA started investigating energy technologies for the Red Planet, the National Science Foundation (NSF) was working on a redesign of their station at the South Pole. To power its operations, NSF used fuel that it flew to the remote location, but the Foundation recognized the benefits of also using onsite renewable energy technologies. In the winter they have small crews and their power requirements are less, says Bubenheim. In the summers, they bring in larger groups and photovoltaics could supply a lot of power. Using renewable energy technology could be a way of reducing the amount of fuel they have to fly in.Technology Transfer To advance wind turbine technology to meet the requirements of extremely harsh environments like that on Mars, Ames partnered with NSF and the Department of Energy. It was clear that a lot of the same features were also desirable for the cold regions of the Earth, says Bubenheim. NASA took the leadership on the team because we had the longest-term technology a Mars turbine.
Romero, Salvador J.; Fernandez-Luque, Luis; Sevillano, José L.; Vognild, Lars
For patients with chronic diseases, exercise is a key part of rehab to deal better with their illness. Some of them do rehabilitation at home with telemedicine systems. However, keeping to their exercising program is challenging and many abandon the rehabilitation. We postulate that information technologies for socializing and serious games can encourage patients to keep doing physical exercise and rehab. In this paper we present Virtual Valley, a low cost telemedicine system for home exercising, based on open source virtual worlds and utilizing popular low cost motion controllers (e.g. Wii Remote) and medical sensors. Virtual Valley allows patient to socialize, learn, and play group based serious games while exercising.
Russell, L. M.; Frossard, A. A.; Long, M. S.; Burrows, S. M.; Elliott, S.; Bates, T. S.; Quinn, P.
2014-12-01
The sources and composition of atmospheric marine aerosol particles have been measured by functional group composition (from Fourier transform infrared spectroscopy) to identify the organic composition of the pristine primary marine (ocean-derived) particles as 65% hydroxyl, 21% alkane, 6% amine, and 7% carboxylic acid functional groups [Frossard et al., 2014a,b]. Pristine but non-primary components from photochemical reactions (likely from biogenic marine vapor emissions) add carboxylic acid groups. Non-pristine contributions include shipping effluent in seawater and ship emissions, which add additional alkane groups (up to 70%), and coastal or continental emissions mix in alkane and carboxylic acid groups. The pristine primary marine (ocean-derived) organic aerosol composition is nearly identical to model generated primary marine aerosol particles from bubbled seawater, indicating that its overall functional group composition is the direct consequence of the organic constituents of the seawater source. While the seawater organic functional group composition was nearly invariant across all three ocean regions studied and the ratio of organic carbon to sodium (OC/Na+) in the generated primary marine aerosol particles remained nearly constant over a broad range of chlorophyll-a concentrations, the generated primary marine aerosol particle alkane group fraction increased with chlorophyll-a concentrations. In addition, the generated primary marine aerosol particles have a hydroxyl group absorption peak location characteristic of monosaccharides and disaccharides, where the seawater hydroxyl group peak location is closer to that of polysaccharides. References Cited Frossard, Amanda A., Lynn M. Russell, Paola Massoli, Timothy S. Bates, and Patricia K. Quinn, "Side-by-Side Comparison of Four Techniques Explains the Apparent Differences in the Organic Composition of Generated and Ambient Marine Aerosol Particles," Aerosol Science and Technology - Aerosol Research Letter, 48:v-x, doi10.1080/02786826.2013.879979, 2014a. Frossard, A.A., L.M. Russell, M.S. Long, S.M. Burrows, S.M. Elliot, T.S. Bates, and P.K. Quinn, "Sources and Composition of Submicron Organic Mass in Marine Aerosol Particles," Journal of Geophysical Research - Atmospheres, submitted 2014b.
Due to the suddenness and complexity of modern warfare, land-based weapon systems need to have precision strike capability on roads and railways. The vehicle navigation system is one of the most important equipments for the land-based weapon systems that have precision strick capability. There are inherent shortcomings for single source navigation systems to provide continuous and stable navigation information. To overcome the shortcomings, the multi-source positioning technology is developed. The All Source Positioning and Navigaiton (ASPN) program was proposed in 2010, which seeks to enable low cost, robust, and seamless navigation solutions for military to use on any operational platform and in any environment with or without GPS. The development trend of vehicle positioning technology was reviewed in this paper. The trend indicates that the positioning technology is developed from single source and multi-source to ASPN. The data fusion techniques based on multi-source and ASPN was analyzed in detail.
Despite significant advances in the science and technology of DNAPL source zone characterization, and DNAPL removal technologies over the past two decades, source remediation has not become a standard objective at most DNAPL sites. Few documented cases of DNAPL source removal have been published, and achievement of the usual cleanup metric in these source zones, namely, meeting Maximum Contaminant Levels ("MCLs") is rare. At most DNAPL sites, removal of sufficient amounts of DNAPL from the source zones to achieve MCLs is considered technically impracticable, taking cost into consideration. Leaving substantial quantities of DNAPL in source zones and instituting appropriate technologies to eliminate continued migration of groundwater plumes emanating from these source zones requires long-term reliability of barrier technologies (hydraulic or physical), and the permanence institutional controls. This strategy runs the risk of technical or institutional failures and possible liabilities associated with natural resource damage claims. To address this challenge, the U.S. Environmental Protection Agency ("EPA") established a panel of experts ("Panel") on DNAPL issues to provide their opinions on the overarching question of whether DNAPL source remediation is feasible. This Panel, co-chaired by the authors of this paper, has now prepared a report summarizing the opinions of the Panel on the key question of whether DNAPL source removal is achievable. This paper will present the findings of the Panel, addressing such issues as the current status of DNAPL source characterization and remediation technologies, alternative metrics of success for DNAPL source remediation, the potential benefits of partial DNAPL source depletion, and research needs to address data gaps that hinder the more widespread implementation of source removal strategies.
Hay, Jason; Gresham, Elaine; Mullins, Carie; Graham, Rachael; Williams-Byrd; Reeves, John D.
2012-01-01
Under the direction of NASA's Exploration Systems Mission Directorate (ESMD), Directorate Integration Office (DIO), The Tauri Group with NASA's Technology Assessment and Integration Team (TAIT) completed several studies and white papers that identify novel technologies for human exploration. These studies provide technical inputs to space exploration roadmaps, identify potential organizations for exploration partnerships, and detail crosscutting technologies that may meet some of NASA's critical needs. These studies are supported by a relational database of more than 400 externally funded technologies relevant to current exploration challenges. The identified technologies can be integrated into existing and developing roadmaps to leverage external resources, thereby reducing the cost of space exploration. This approach to identifying potential spin-in technologies and partnerships could apply to other national space programs, as well as international and multi-government activities. This paper highlights innovative technologies and potential partnerships from economic sectors that historically are less connected to space exploration. It includes breakthrough concepts that could have a significant impact on space exploration and discusses the role of breakthrough concepts in technology planning. Technologies and partnerships are from NASA's Technology Horizons and Technology Frontiers game-changing and breakthrough technology reports as well as the External Government Technology Dataset, briefly described in the paper. The paper highlights example novel technologies that could be spun-in from government and commercial sources, including virtual worlds, synthetic biology, and human augmentation. It will consider how these technologies can impact space exploration and will discuss ongoing activities for planning and preparing them.
Diaz, Keith M; Thanataveerat, Anusorn; Parsons, Faith E; Yoon, Sunmoo; Cheung, Ying Kuen; Alcantara, Carmela; Duran, Andrea T; Ensari, Ipek; Krupka, David J; Schwartz, Joseph E; Burg, Matthew M; Davidson, Karina W
2018-05-24
The purpose of this study, which used mobile technologies to continuously collect data over 1 year, was to examine the association of psychological stress with objectively measured sedentary behavior in adults at both the group (e.g. nomothetic approach) and individual (e.g. idiographic approach) level. Data were collected in an observational study of healthy adults (n=79) residing in the New York City metro area who were studied for 365 days from 2014-2015. Sedentary behavior was objectively measured via accelerometry. A smartphone-based electronic diary was used to assess level of stress ("Overall, how stressful was your day?"; 0-10 scale) and sources of stress. The end-of-day stress rating was not associated with total sedentary time (B= -1.34, p=0.767) at the group-level. When specific sources of stress were evaluated at the group-level, argument-related stress was associated with increased sedentariness; while running late- and work-related stress were associated with decreased sedentariness. There was a substantial degree of inter-individual variability in the relationship of stress with sedentary behavior. Both the level and sources of stress were associated with increased sedentariness for some, decreased sedentariness for others, and had no effect for many (within-person variance p-value <0.001). These findings suggest that the influence of stress on sedentary behavior varies by source of stress and from person-to-person. A precision medicine approach may be warranted to target reductions in sedentary time; although further studies are needed to confirm the observed findings in light of study limitations including a small sample size and enrollment of participants from a single, urban metropolitan area.
The efficiency of the treatment technologies is expected to vary with the source water quality. By testing the technologies with various source waters, the research will quantify the limits of the technology: testing the flow rate variations with influent water quality, evalu...
Three technologies form the heart of any network-centric command, control, communication, intelligence, surveillance, and reconnaissance (C4ISR) system: distributed processing, reconfigurable networking, and distributed resource management. Distributed processing, enabled by automated federation, mobile code, intelligent process allocation, dynamic multiprocessing groups, check pointing, and other capabilities creates a virtual peer-to-peer computing network across the force. Reconfigurable networking, consisting of content-based information exchange, dynamic ad-hoc routing, information operations (perception management) and other component technologies forms the interconnect fabric for fault tolerant inter processor and node communication. Distributed resource management, which provides the means for distributed cooperative sensor management, foe sensor utilization, opportunistic collection, symbiotic inductive/deductive reasoning and other applications provides the canonical algorithms for network-centric enterprises and warfare. This paper introduces these three core technologies and briefly discusses a sampling of their component technologies and their individual contributions to network-centric enterprises and warfare. Based on the implied requirements, two new algorithms are defined and characterized which provide critical building blocks for network centricity: distributed asynchronous auctioning and predictive dynamic source routing. The first provides a reliable, efficient, effective approach for near-optimal assignment problems; the algorithm has been demonstrated to be a viable implementation for ad-hoc command and control, object/sensor pairing, and weapon/target assignment. The second is founded on traditional dynamic source routing (from mobile ad-hoc networking), but leverages the results of ad-hoc command and control (from the contributed auctioning algorithm) into significant increases in connection reliability through forward prediction. Emphasis is placed on the advantages gained from the closed-loop interaction of the multiple technologies in the network-centric application environment.
Zhang, Ning Jackie; Seblega, Binyam; Wan, Thomas; Unruh, Lynn; Agiro, Abiy; Miao, Li
2013-04-01
Previous studies show that the healthcare industry lags behind many other economic sectors in the adoption of information technology. The purpose of this study is to understand differences in structural characteristics between providers that do and that do not adopt Health Information Technology (HIT) applications. Publicly available secondary data were used from three sources: American Hospital Association (AHA) annual survey, Healthcare Information and Management Systems Society (HIMSS) analytics annual survey, and Healthcare Cost and Utilization Project (HCUP) Nationwide Inpatient Sample (NIS) databases. Fifty-two information technologies were grouped into three clusters: clinical, administrative, and strategic decision making ITs. Negative binomial regression was applied with adoption of technology as the dependent variables and eight organizational and contextual factors as the independent variables. Hospitals adopt a relatively larger proportion of administrative information technology as compared to clinical and strategic IT. Large size, urban location and HMO penetration were found to be the most influential hospital characteristics that positively affect information technology adoption. There are still considerable variations in the adoption of information technology across hospitals and in the type of technology adopted. Organizational factors appear to be more influential than market factors when it comes to information technology adoption. The future research may examine whether the Electronic Health Record (EHR) Incentive Program in 2011 would increase the information technology uses in hospitals as it provides financial incentives for HER adoptions and uses among providers.
The document is an English-Russian, Russian-English glossary of coal-cleaning terms, compiled as a joint U.S./Soviet effort. The need for the glossary resulted from the growing number of language-specific terms used during information exchanges within the framework of the U.S./U.S.S.R. Working Group on Stationary Source Air Pollution Control Technology, under the U.S./U.S.S.R. Agreement of Cooperation in the Field of Environmental Protection.
Travel to distant stars is a long-range goal of Marshall Space Flight Center's Advanced Concept Group. One of the many propulsion systems currently being studied is fusion power. The objective of this and many other alternative propulsion systems is to reduce the costs of space access and to reduce the travel time for planetary missions. One of the major factors is providing an alternate engery source for these missions. Pictured is an artist's concept of future interplanetary space flight using fusion power.
in 1959 when the technology used in prospecting for oil by seismic means was employed to detect and sug- gest the source of earth shocks generated by...result of TI’ s work in seismology for oil exploration. The use of seismometers for intrusion detection stemmed from the large, unde- sirable signals...produced by any human movement during oil -field seismic tests. The first military contract for six test models of these devices was received in 1963
Della Lucia, Ceres M; Vaz Tostes, Maria das Graças; Silveira, Carlos Mário M; Bordalo, Lívia A; Rodrigues, Fabiana C; Pinheiro-Sant'Ana, Helena Maria; Martino, Hércia S D; Costa, Neuza Maria B
2013-03-01
This study aimed to evaluate iron (Fe) bioavailability in Wistar rats fed with rice fortified with micronized ferric pyrophosphate (FP) by Ultra Rice (UR) technology with or without addition of yacon flour as a source of 7.5% of fructooligosaccharides (FOS). Diets were supplied with 12 mg iron/kg from the following sources: ferrous sulfate (FS - control diet), fortified rice with micronized ferric pyrophosphate (Ultra Rice) (UR diet), ferrous sulfate + yacon flour (FS + Y diet) or Ultra Rice + yacon flour (UR + Y diet). Blood samples were collected at the end of depletion and repletion stages for determination of hemoglobin concentration and calculation of the relative biological value (RBV). Also, the content of short chain fatty acids (SCFA) (acetic, propionic and butyric acids) from animals' stools and caecum weight were determined. The UR diet showed high iron bioavailability (RBV = 84.7%). However, the addition of yacon flour in the diet containing fortified rice (UR + Y diet) decreased RBV (63.1%) significantly below the other three groups (p < 0.05). Groups that received yacon flour showed higher acetic acid values compared to those who did not. In conclusion, fortified UR with micronized ferric pyrophosphate showed high iron bioavailability but the addition of yacon flour at 7.5% FOS reduced iron bioavailability despite increased caecum weight and SCFA concentration.
Heavy metal remediation of aqueous streams is of special concern due to recalcitrant and persistency of heavy metals in environment. Conventional treatment technologies for the removal of these toxic heavy metals are not economical and further generate huge quantity of toxic chemical sludge. Biosorption is emerging as a potential alternative to the existing conventional technologies for the removal and/or recovery of metal ions from aqueous solutions. The major advantages of biosorption over conventional treatment methods include: low cost, high efficiency, minimization of chemical or biological sludge, regeneration of biosorbents and possibility of metal recovery. Cellulosic agricultural waste materials are an abundant source for significant metal biosorption. The functional groups present in agricultural waste biomass viz. acetamido, alcoholic, carbonyl, phenolic, amido, amino, sulphydryl groups etc. have affinity for heavy metal ions to form metal complexes or chelates. The mechanism of biosorption process includes chemisorption, complexation, adsorption on surface, diffusion through pores and ion exchange etc. The purpose of this review article is to provide the scattered available information on various aspects of utilization of the agricultural waste materials for heavy metal removal. Agricultural waste material being highly efficient, low cost and renewable source of biomass can be exploited for heavy metal remediation. Further these biosorbents can be modified for better efficiency and multiple reuses to enhance their applicability at industrial scale.
A critical review of biological treatment processes for remediation of contaminated soils is presented. The focus of the review is on documented cost and performance of biological treatment technologies demonstrated at full- or field-scale. Some of the data were generated by the U.S. Environmental Protection Agency's (EPA's) Bioremediation in the Field Program, jointly supported by EPA's Office of Research and Development, EPA's Office of Solid Waste and Emergency Waste, and the EPA Regions through the Superfund Innovative Technology Evaluation Program (SITE) Program. Military sites proved to be another fertile data source. Technologies reviewed in this report include both ex-situ processes, (land treatment, biopile/biocell treatment, composting, and bioslurry reactor treatment) and in-situ alternatives (conventional bioventing, enhanced or cometabolic bioventing, anaerobic bioventing, bioslurping, phytoremediation, and natural attenuation). Targeted soil contaminants at the documented sites were primarily organic chemicals, including BTEX, petroleum hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), chlorinated aliphatic hydrocarbons (CAHs), organic solvents, polychlorinated biphenyls (PCBs), pesticides, dioxin, and energetics. The advantages, limitations, and major cost drivers for each technology are discussed. Box and whisker plots are used to summarize before and after concentrations of important contaminant groups for those technologies consider
Gustafson, David H; McTavish, Fiona; Gustafson, David H; Mahoney, Jane E; Johnson, Roberta A; Lee, John D; Quanbeck, Andrew; Atwood, Amy K; Isham, Andrew; Veeramani, Raj; Clemson, Lindy; Shah, Dhavan
2015-04-25
This study investigates the use of an information and communication technology (Elder Tree) designed for older adults and their informal caregivers to improve older adult quality of life and address challenges older adults face in maintaining their independence (for example, loneliness and isolation, falling, managing medications, driving and transportation). This study, an unblinded randomized controlled trial, will evaluate the effectiveness and cost of Elder Tree. Older adults who are at risk for losing their independence - along with their informal caregivers, if they name them - are randomized to two groups. The intervention group has access to their usual sources of information and communication as well as to Elder Tree for 18 months while the control group uses only their usual sources of information and communication. The primary outcome of the study is older adult quality of life. Secondary outcomes are cost per Quality-Adjusted Life Year and the impact of the technology on independence, loneliness, falls, medication management, driving and transportation, and caregiver appraisal and mastery. We will also examine the mediating effect of self-determination theory. We will evaluate the effectiveness of Elder Tree by comparing intervention- and control-group participants at baseline and months 6, 12, and 18. We will use mixed-effect models to evaluate the primary and secondary outcomes, where pretest score functions as a covariate, treatment condition is a between-subjects factor, and the multivariate outcome reflects scores for a given assessment at the three time points. Separate analyses will be conducted for each outcome. Cost per Quality-Adjusted Life Year will be compared between the intervention and control groups. Additional analyses will examine the mediating effect of self-determination theory on each outcome. Elder Tree is a multifaceted intervention, making it a challenge to assess which services or combinations of services account for outcomes in which subsets of older adults. If Elder Tree can improve quality of life and reduce healthcare costs among older adults, it could suggest a promising way to ease the burden that advancing age can place on older adults, their families, and the healthcare system. ClinicalTrials.gov NCT02128789 . Registered on 26 March 2014.
Edmonds, Ernest W.; Rowlands, John A.; Hynes, David M.; Toth, B. D.; Porter, Anthony J.
1990-07-01
There is increased concern over radiation exposure to the general population from many sources. One of the most significant sources is that received by the patient during medical diagnostic procedures, and of these, the procedure with the greatest potential hazard is fluoroscopy. The legal limit for fluoroscopy in most jurisdictions is SR per minute skin exposure rate. Fluoroscopes are often operated in excess of this figure, and in the case of interventional procedures, fluorocopy times may exceed 20 minutes. With improvements in medical technology these procedures are being performed more often, and also are being carried out on younger age groups. Radiation exposure during fluoroscopy, both to patient and operator, is therefore becoming a matter of increasing concern to regulating authorities, and it is incumbent on us to develop digital technology to minimise the radiation hazard in these procedures. This paper explores the technical options available for radiation exposure reduction, including pulsed fluoroscopy, digital noise reduction, or simple reduction in exposure rate to the x-ray image intensifier. We also discuss educational aspects of fluoroscopy which radiologists should be aware of which can be more important than the technological solutions. A "work in progress" report gives a completely new approach to the implementation of a large number of possible digital algorithms, for the investigation of clinical efficacy.
Past schemes for using beamed microwave power for space propulsion and providing power to space platforms have used microwaves below 10 GHz. Recent expansions of the high power microwave technology domain offer fundamental reassessment of the following missions: (1) location of orbital debris, (2) supplying power to loitering high-altitude airplanes, (3) satellite battery recharging, (4) imaging of asteroids, (5) orbit raising and transfer, (6) interplanetary probe launch to the outer planets and comets, and ultimately (7) launch into Earth orbit. This group of applications may be done by a ground-based system. The system would start small, being built for themore » near Earth missions, and be enlarged incrementally as the technology matures and confidence develops. Of particular interest are sources in the millimeter range where there are low loss atmospheric windows and MJ pulses are available in quasi-CW operation. A development scenario for these missions using millimeter wave technology is described.« less
In this phase I work, we propose to construct and demonstrate a 103 nm laser based on resonantly enhanced and phase matched fifth harmonic generation in hollow waveguides driven by a high power, low cost and compact ultrafast fiber laser. (Figure 4) This VUV laser source can potentially produce >100 milliwatts of VUV light at 103 nm with pulse repetition-rates of 100 kHz to 100 MHz, ideal for the above-mentioned applications. This technology is state-of-the-art and potentially compact, fieldable, low-cost, and of broad interest for a variety of science and technology applications. Laser-based VUV sources in the past have exhibitedmore » low repetition rate, low efficiency, low beam quality, and are based on expensive laser sources. Our approch is to combine ultrafast fiber laser drive technology, ultrafast pulses, and our proven waveguide technology, to create a high repetition rate, high average power VUV source for producing high yield metastable Krypton. At KMLabs we have been offering EUV light sources employing the high harmonic generation (HHG) process driven by high-power femtosecond lasers for >5 years now. Recently, we have developed much smaller scale (briefcase size), but still high average power femtosecond fiber laser sources to supply other markets, and create new ones. By combining these new laser sources with our patented waveguide frequency upconversion technology, we expect to be able to obtain >20mW average power initially, with potentially much higher powers depending on wavelength, in an affordable VUV product. For comparison, our current EUV light sources based on ti:sapphire generate an average power of ~5 µW (albeit at shorter 29 nm wavelength), and we are aware of one other supplier that has developed a VUV (112 nm) light source with ~10-20 µW power.« less
The Puerto Rico Energy Affairs Administration (PREAA) is actively engaged in the implementation of existing public policy for the conservation of energy and promotion of renewable energy to reduce consumer’s costs and reduce environmental impact. Puerto Rico is an island in where no own reserves of gas, oil or coal exists. This severe dependence in on foreign oil is reflected in the higher cost of electricity in Puerto Rico, which is significantly higher than most of the United States. Therefore, public energy policy of Puerto Rico places emphasis on diversification of energy sources and the use of renewable energy technologies.more » The Wind energy Alliance for the Sustainable Development project focused on the formation of a wind energy working group to educate and promote wind energy technologies; at the same time the evaluating the viability of wind energy in Puerto Rico. The educational outreach was performed through a series of wind energy workshops where interested parties such as, installers, sellers, engineers, general public even opposing groups participate from the activities.« less
Robichaud, Guillaume; Garrard, Kenneth P; Barry, Jeremy A; Muddiman, David C
2013-05-01
During the past decade, the field of mass spectrometry imaging (MSI) has greatly evolved, to a point where it has now been fully integrated by most vendors as an optional or dedicated platform that can be purchased with their instruments. However, the technology is not mature and multiple research groups in both academia and industry are still very actively studying the fundamentals of imaging techniques, adapting the technology to new ionization sources, and developing new applications. As a result, there important varieties of data file formats used to store mass spectrometry imaging data and, concurrent to the development of MSi, collaborative efforts have been undertaken to introduce common imaging data file formats. However, few free software packages to read and analyze files of these different formats are readily available. We introduce here MSiReader, a free open source application to read and analyze high resolution MSI data from the most common MSi data formats. The application is built on the Matlab platform (Mathworks, Natick, MA, USA) and includes a large selection of data analysis tools and features. People who are unfamiliar with the Matlab language will have little difficult navigating the user-friendly interface, and users with Matlab programming experience can adapt and customize MSiReader for their own needs.
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
Robichaud, Guillaume; Garrard, Kenneth P.; Barry, Jeremy A.; Muddiman, David C.
2013-05-01
During the past decade, the field of mass spectrometry imaging (MSI) has greatly evolved, to a point where it has now been fully integrated by most vendors as an optional or dedicated platform that can be purchased with their instruments. However, the technology is not mature and multiple research groups in both academia and industry are still very actively studying the fundamentals of imaging techniques, adapting the technology to new ionization sources, and developing new applications. As a result, there important varieties of data file formats used to store mass spectrometry imaging data and, concurrent to the development of MSi, collaborative efforts have been undertaken to introduce common imaging data file formats. However, few free software packages to read and analyze files of these different formats are readily available. We introduce here MSiReader, a free open source application to read and analyze high resolution MSI data from the most common MSi data formats. The application is built on the Matlab platform (Mathworks, Natick, MA, USA) and includes a large selection of data analysis tools and features. People who are unfamiliar with the Matlab language will have little difficult navigating the user-friendly interface, and users with Matlab programming experience can adapt and customize MSiReader for their own needs.
Fuel cell technology is one of the alternative energy sources for the next generation. Although this technology has proven to be one of the main methods for producing new energy sources, fuel cell technology still has some problems that hinder fuel cell commercialization. Recently, new ideas on titanium dioxide are introduced as potential solution in several applications in fuel cell technology. Thus, this article presents an overview on the applications of titanium dioxide and highlights the unique properties and benefits of titanium dioxide in fuel cell technology.
... new affected sources. 63.54 Section 63.54 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... CATEGORIES Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air... required. (2) The permitting authority will approve an applicant's proposed control technology, or the...
This special issue contains peer-reviewed invited and contributed papers that were presented at The International Symposium on 'Future Trend in Soft Material Research with Advanced Light Source: Interdisciplinary of Bio- & Synthetic- Materials and Industrial Transferring', which was held in SPring-8, Japan, on September 1-3, 2010. Advanced light sources including neutron and synchrotron are becoming increasingly critical to the study of soft materials. This cutting-edge analytical tool is expected to lead to the creation of new materials with revolutionary properties and functions. At SPring-8, a new beam line dedicated to soft materials has now been launched as one of the most powerful X-rays for scattering and diffraction. Additionally, the next-generation light source, XFEL (X-ray Free Electron Laser), facilities are currently being developed in several locations. In the near future, femto-second and coherent X-ray sources will be available in soft material research and should reveal the various new aspects of advanced soft material research and technology. On the occasion of the third fiscal year of the CREST (project leader: Kazuo Sakurai) and ERATO (project leader: Atsushi Takahara) projects, we organized this international symposium in order to accelerate the discussion among global-level researchers working on next-generation synchrotron radiation science, biophysics and supramolecular science, modern surface science in soft materials, and industrial applications of neutron and synchrotron radiation sources. In this symposium 21 oral presentations, including 8 invited speakers from abroad, and 40 poster presentations from USA, France, Korea, Taiwan, and Japan were presented during the three day symposium. The symposium chairs reviewed the poster presentations by young scientists, and eight young researchers received the Award for Best Poster Presentation. We sincerely hope that these proceedings will be beneficial in future applications of advanced light sources to soft materials science and technology, not only to our ERATO and CREST projects, but also to the research of all the participants, broadening our scientific horizons. Kazuo Sakurai & Atsushi TakaharaSymposium Chairs Symposium Organization and Committee Supported by: Japan Science and Technology Agency (JST) Japan Synchrotron Radiation Research Institute (JASRI) Co-sponsored by: Society of Japan Polymer Science Japanese Society of Synchrotron Radiation Research Advanced Softmaterial Beamline Consortium Symposium Chairs: Atsushi Takahara (Kyushu University, JST, ERATO) Kazuo Sakurai (Univ. Kitakyushu, JST, CREST) Organizing Committee: Yoshiyuki Amemiya (The Univ. of Tokyo, JST, CREST) Naoto Yagi (JASRI, JST, CREST) Masaki Takata (JASRI) Isamu Akiba (Univ. Kitakyushu, JST, CREST) Yuya Shinohara (The Univ. of Tokyo, JST, CREST) Taiki Hoshino (Kyushu University, JST, ERATO) Jun-ichi Imuta (Kyushu University, JST, ERATO) Moriya Kikuchi (Kyushu University, JST, ERATO) Motoyasu Kobayashi (Kyushu University, JST, ERATO) Group photograph Group photograph Lecture meeting Lecture meeting
The U.S. high-energy physics program needs an intense proton source, a 1-4 MW Proton Driver (PD), by the end of this decade. This machine will serve as a stand-alone facility that will provide neutrino superbeams and other high intensity secondary beams such as kaons, muons, neutrons, and anti-protons (cf. E1 and E5 group reports) and also serve as the first stage of a neutrino factory (cf. M1 group report). It can also be a high brightness source for a VLHC. Based on present accelerator technology and project construction experience, it is both feasible and cost-effective to construct a 1-4 MWmore » Proton Driver. Two recent PD design studies have been made, one at FNAL and the other at the BNL. Both designed PD's for 1 MW proton beams at a cost of about U.S. $200M (excluding contingency and overhead) and both designs were upgradeable to 4 MW. An international collaboration between FNAL, BNL and KEK on high intensity proton facilities is addressing a number of key design issues. The superconducting (sc) RF cavities, cryogenics, and RF controls developed for the SNS can be directly adopted to save R&D efforts, cost, and schedule. PD studies are also actively being pursued at Europe and Japan.« less
Mou, Xi; Narendran, Nadarajah; Zhu, Yiting; Freyssinier, Jean Paul
2016-09-01
Solid-state lighting (SSL) offers a new technology platform for lighting designers and end-users to illuminate spaces with low energy demand. Two types of SSL sources include organic light-emitting diodes (OLEDs) and light-emitting diodes (LEDs). OLED is an area light source, and its primary competing technology is the edge-lit LED panel. Generally, both of these technologies are considered similar in shape and appearance, but there is little understanding of how people perceive discomfort glare from large area light sources. The objective of this study was to evaluate discomfort glare for the two lighting technologies under similar operating conditions by gathering observers' reactions. The human factors study results showed no statistically significant difference in human response to discomfort glare between OLED and edge-lit LED panels when the two light sources produced the same lighting stimulus. This means both technologies appeared equally glary beyond a certain luminance.
Riggs, Daniel J.; O'Brien, Kevin; Brown, Daniel J. W.
2011-04-01
The continuous evolution of the semiconductor market necessitates ever-increasing improvements in DUV light source uptime as defined in the SEMI E10 standard. Cymer is developing technologies to exceed current and projected light source availability requirements via significant reduction in light source downtime. As an example, consider discharge chamber gas management functions which comprise a sizable portion of DUV light source downtime. Cymer's recent introduction of Gas Lifetime Extension (GLXTM) as a productivity improvement technology for its DUV lithography light sources has demonstrated noteworthy reduction in downtime. This has been achieved by reducing the frequency of full gas replenishment events from once per 100 million pulses to as low as once per 2 billion pulses. Cymer has continued to develop relevant technologies that target further reduction in downtime associated with light source gas management functions. Cymer's current subject is the development of technologies to reduce downtime associated with gas state optimization (e.g. total chamber gas pressure) and gas life duration. Current gas state optimization involves execution of a manual procedure at regular intervals throughout the lifetime of light source core components. Cymer aims to introduce a product enhancement - iGLXTM - that eliminates the need for the manual procedure and, further, achieves 4 billion pulse gas lives. Projections of uptime on DUV light sources indicate that downtime associated with gas management will be reduced by 70% when compared with GLX2. In addition to reducing downtime, iGLX reduces DUV light source cost of operation by constraining gas usage. Usage of fluorine rich Halogen gas mix has been reduced by 20% over GLX2.
The geospatial industry is forecasted to have an enormous growth in the forthcoming years and an extended need for well-educated workforce. Hence ongoing education and training play an important role in the professional life. Parallel, in the geospatial and IT arena as well in the political discussion and legislation Open Source solutions, open data proliferation, and the use of open standards have an increasing significance. Based on the Memorandum of Understanding between International Cartographic Association, OSGeo Foundation, and ISPRS this development led to the implementation of the ICA-OSGeo-Lab imitative with its mission "Making geospatial education and opportunities accessible to all". Discussions in this initiative and the growth and maturity of geospatial Open Source software initiated the idea to develop a framework for a worldwide applicable Open Source certification approach. Generic and geospatial certification approaches are already offered by numerous organisations, i.e., GIS Certification Institute, GeoAcademy, ASPRS, and software vendors, i. e., Esri, Oracle, and RedHat. They focus different fields of expertise and have different levels and ways of examination which are offered for a wide range of fees. The development of the certification framework presented here is based on the analysis of diverse bodies of knowledge concepts, i.e., NCGIA Core Curriculum, URISA Body Of Knowledge, USGIF Essential Body Of Knowledge, the "Geographic Information: Need to Know", currently under development, and the Geospatial Technology Competency Model (GTCM). The latter provides a US American oriented list of the knowledge, skills, and abilities required of workers in the geospatial technology industry and influenced essentially the framework of certification. In addition to the theoretical analysis of existing resources the geospatial community was integrated twofold. An online survey about the relevance of Open Source was performed and evaluated with 105 respondents worldwide. 15 interviews (face-to-face or by telephone) with experts in different countries provided additional insights into Open Source usage and certification. The findings led to the development of a certification framework of three main categories with in total eleven sub-categories, i.e., "Certified Open Source Geospatial Data Associate / Professional", "Certified Open Source Geospatial Analyst Remote Sensing & GIS", "Certified Open Source Geospatial Cartographer", "Certified Open Source Geospatial Expert", "Certified Open Source Geospatial Associate Developer / Professional Developer", "Certified Open Source Geospatial Architect". Each certification is described by pre-conditions, scope and objectives, course content, recommended software packages, target group, expected benefits, and the methods of examination. Examinations can be flanked by proofs of professional career paths and achievements which need a peer qualification evaluation. After a couple of years a recertification is required. The concept seeks the accreditation by the OSGeo Foundation (and other bodies) and international support by a group of geospatial scientific institutions to achieve wide and international acceptance for this Open Source geospatial certification model. A business case for Open Source certification and a corresponding SWOT model is examined to support the goals of the Geo-For-All initiative of the ICA-OSGeo pact.
Microalgae are autotrophic organisms found in solitary cells or in groups of single cells connected together. Their natural environment are typically freshwater and marine systems. Microalgae produce, via photosynthesis, approximately one-half of oxygen generated on earth while simultaneously consume carbon dioxide (CO2). Among the technologies being examined to produce green fuels (e.g. biodiesel, bioethanol and syngas), microalgae are viewed by many in the scientific community as having the greatest potential to become economically viable fuels. Nevertheless, to reach economic parity with fossil fuels there are still several challenges to be tackle. These include improving harvesting and oil extraction processes as well as increasing biomass productivity and oil content. All of these challenges can be impacted by genetic, molecular, and ultimately synthetic biology techniques.
The Environmental Technology Verification Program (ETV) was established in 1995 by the U.S. Environmental Protection Agency to encourage the development and commercialization of new environmental technologies through third part testing and reporting of performance data. By ensur...
... affected sources. 63.52 Section 63.52 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... CATEGORIES Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air... emission reductions that can be achieved if the control technologies or work practices are installed...
Wake, Deborah J.; He, Jinzhang; Czesak, Anna Maria; Mughal, Fezan; Cunningham, Scott G.
2016-01-01
MyDiabetesMyWay (MDMW) is an award-wining national electronic personal health record and self-management platform for diabetes patients in Scotland. This platform links multiple national institutional and patient-recorded data sources to provide a unique resource for patient care and self-management. This review considers the current evidence for online interventions in diabetes and discusses these in the context of current and ongoing developments for MDMW. Evaluation of MDMW through patient reported outcomes demonstrates a positive impact on self-management. User feedback has highlighted barriers to uptake and has guided platform evolution from an education resource website to an electronic personal health record now encompassing remote monitoring, communication tools and personalized education links. Challenges in delivering digital interventions for long-term conditions include integration of data between institutional and personal recorded sources to perform big data analytics and facilitating technology use in those with disabilities, low digital literacy, low socioeconomic status and in minority groups. The potential for technology supported health improvement is great, but awareness and adoption by health workers and patients remains a significant barrier. PMID:27162192
X-ray imaging system has shown its usefulness for providing quick and easy access of imaging in both clinic settings and emergency situations. It greatly improves the workflow in hospitals. However, the conventional radiography systems, lacks 3D information in the images. The tissue overlapping issue in the 2D projection image result in low sensitivity and specificity. Both computed tomography and digital tomosynthesis, the two conventional 3D imaging modalities, requires a complex gantry to mechanically translate the x-ray source to various positions. Over the past decade, our research group has developed a carbon nanotube (CNT) based x-ray source technology. The CNT x-ray sources allows compacting multiple x-ray sources into a single x-ray tube. Each individual x-ray source in the source array can be electronically switched. This technology allows development of stationary tomographic imaging modalities without any complex mechanical gantries. The goal of this work is to develop a stationary digital chest tomosynthesis (s-DCT) system, and implement it for a clinical trial. The feasibility of s-DCT was investigated. It is found that the CNT source array can provide sufficient x-ray output for chest imaging. Phantom images have shown comparable image qualities as conventional DCT. The s-DBT system was then used to study the effects of source array configurations and tomosynthesis image quality, and the feasibility of a physiological gated s-DCT. Using physical measures for spatial resolution, the 2D source configuration was shown to have improved depth resolution and comparable in-plane resolution. The prospective gated tomosynthesis images have shown substantially reduction of image blur associated with lung motions. The system was also used to investigate the feasibility of using s-DCT as a diagnosis and monitoring tools for cystic fibrosis patients. A new scatter reduction methods for s-DCT was also studied. Finally, a s-DCT system was constructed by retrofitting the source array to a Carestream digital radiography system. The system passed the electrical and radiation safety tests, and was installed in Marsico Hall. The patient trial started in March of 2015, and the first patient was successfully imaged.
The recent introduction of RepRap (self-replicating rapid prototyper) 3-D printers and the resultant open source technological improvements have resulted in affordable 3-D printing, enabling low-cost distributed manufacturing for individuals. This development and others such as the rise of open source-appropriate technology (OSAT) and solar powered 3-D printing are moving 3-D printing from an industry based technology to one that could be used in the developing world for sustainable development. In this paper, we explore some specific technological improvements and how distributed manufacturing with open-source 3-D printing can be used to provide open-source 3-D printable optics components for developing world communities through the ability to print less expensive and customized products. This paper presents an open-source low cost optical equipment library which enables relatively easily adapted customizable designs with the potential of changing the way optics is taught in resource constraint communities. The study shows that this method of scientific hardware development has a potential to enables a much broader audience to participate in optical experimentation both as research and teaching platforms. Conclusions on the technical viability of 3-D printing to assist in development and recommendations on how developing communities can fully exploit this technology to improve the learning of optics through hands-on methods have been outlined.
This guide identifies sources of funding for purchasing assistive technology for people with disabilities. It outlines eligibility requirements, specifies which devices can be obtained from which sources of funding, and discusses how to effectively approach the funding process. It begins by defining assistive technology categories, describing the…
Hoelzer, Simon; Schweiger, Ralf K; Dudeck, Joachim
2003-01-01
With the introduction of ICD-10 as the standard for diagnostics, it becomes necessary to develop an electronic representation of its complete content, inherent semantics, and coding rules. The authors' design relates to the current efforts by the CEN/TC 251 to establish a European standard for hierarchical classification systems in health care. The authors have developed an electronic representation of ICD-10 with the eXtensible Markup Language (XML) that facilitates integration into current information systems and coding software, taking different languages and versions into account. In this context, XML provides a complete processing framework of related technologies and standard tools that helps develop interoperable applications. XML provides semantic markup. It allows domain-specific definition of tags and hierarchical document structure. The idea of linking and thus combining information from different sources is a valuable feature of XML. In addition, XML topic maps are used to describe relationships between different sources, or "semantically associated" parts of these sources. The issue of achieving a standardized medical vocabulary becomes more and more important with the stepwise implementation of diagnostically related groups, for example. The aim of the authors' work is to provide a transparent and open infrastructure that can be used to support clinical coding and to develop further software applications. The authors are assuming that a comprehensive representation of the content, structure, inherent semantics, and layout of medical classification systems can be achieved through a document-oriented approach.
Hoelzer, Simon; Schweiger, Ralf K.; Dudeck, Joachim
2003-01-01
With the introduction of ICD-10 as the standard for diagnostics, it becomes necessary to develop an electronic representation of its complete content, inherent semantics, and coding rules. The authors' design relates to the current efforts by the CEN/TC 251 to establish a European standard for hierarchical classification systems in health care. The authors have developed an electronic representation of ICD-10 with the eXtensible Markup Language (XML) that facilitates integration into current information systems and coding software, taking different languages and versions into account. In this context, XML provides a complete processing framework of related technologies and standard tools that helps develop interoperable applications. XML provides semantic markup. It allows domain-specific definition of tags and hierarchical document structure. The idea of linking and thus combining information from different sources is a valuable feature of XML. In addition, XML topic maps are used to describe relationships between different sources, or “semantically associated” parts of these sources. The issue of achieving a standardized medical vocabulary becomes more and more important with the stepwise implementation of diagnostically related groups, for example. The aim of the authors' work is to provide a transparent and open infrastructure that can be used to support clinical coding and to develop further software applications. The authors are assuming that a comprehensive representation of the content, structure, inherent semantics, and layout of medical classification systems can be achieved through a document-oriented approach. PMID:12807813
A HOMOGENEOUS GROUND PLANE SOURCE THESIS Presented to the Faculty of the School of Engineering of the Air Force Institute of Technology Air University...come from a standard ANISN format library called FEWG1-85. This state-of-the- art cross section library which contains 37 neutron energy groups and 21...purpose. The FEWGl library, a state-of-the- art cross section library developed for the Defense Nuclear Agency con- sisting of 21 gamma-ray enerQj
Successful trace chemical contamination control is one of the components necessary for achieving good cabin atmospheric quality. While employing seemingly simple process technologies, sizing the active contamination control equipment must employ a reliable design basis for the trace chemical load in the cabin atmosphere. A simplified design basis that draws on experience gained from the International Space Station program is presented. The trace chemical contamination control design load refines generation source magnitudes and includes key chemical functional groups representing both engineering and toxicology challenges.
Radiofrequency (RF) and combined RF light source technologies have established themselves as safe and effective treatment modalities for several dermatologic procedures, including skin tightening, hair and leg vein removal, acne scarring, skin rejuvenation, and wrinkle reduction. This article reviews the technology, clinical applications, and recent advances of RF and combined RF light/laser source technologies in aesthetic medicine.
International Council of Scientific Unions, Paris (France).
Provided in this inventory are sources of numerical or factual data in selected fields of basic science and applied science/technology. The objective of the inventory is to provide organizations and individuals (scientists, engineers, and information specialists), particularly those in developing countries, with basic data sources relevant to…
Purpose The purpose of this qualitative focus group elicitation research study was to explore teen driver perceptions of peer passengers and driver inattention. Design & Methods We utilized focus groups for data collection and content analysis to analyze the data, both of which were guided by the Theory of Planned Behavior. We conducted 7 focus groups with 30 teens, ages 16–18, licensed for ≤1 year to examine attitudes, perceived behavioral control, and norms related to driving inattention and peer passengers. Results The sample was 50% male, mean age 17.39 (sd 0.52) with mean length of licensure 173.7 days (sd 109.2). Three themes emerged: 1) “Good and not good” passengers; 2) Passengers and technology as harmful and helpful; and 3) The driver is in charge. Conclusions While passengers can be a source of distraction, our participants also identified passenger behaviors that reduced risk, such as assistance with technology and guidance for directions. Practical Implications An understanding of teens’ perceptions of peer passengers can contribute to the development of effective interventions targeting teen driver inattention. Nurses are well-positioned to contribute to these teen crash prevention efforts. PMID:27496828
To establish an animal model for Pneumocystis pneumonia (PCP) and to study the etiological and molecular biological technology for PCP detection. SD and Wistar rats were divided into experimental and control groups randomly. The animals in the experimental group were immunosuppressed by subcutaneous injection with dexamethasone 2 mg per time per rat, twice a week, while those in the control group underwent the same way of injection with physiological saline simultaneously. After the induction for 8 weeks, all the rats were killed and their bronchoalveolar lavage fluid (BALF) and lung tissues were collected for smear making and microscopic detection. Meanwhile, the BALF samples were detected by PCR, and the products were sequenced and compared with rat source PCP in GenBank. A total of 34 samples of lung tissue and BALF were observed. The etiological detection showed that the infection rates of the rats in the experimental and control groups were 29.2% (7/24) and 0, respectively. In the experimental group, the infection rates of SD and Wistar rats were 25.0% (3/12) and 33.3% (4/12), respectively, and the difference between them was not statistically significant (P = 0.31). The positive detection rates of the lung smears and BALF from SD rats in the experimental group were 25.0% (3/12) and 16.7% (2/12), respectively, while those in Wistar rats in the experimental group were 33.3% (4/12) and 16.7% (2/12), respectively, and there were no statistically significant difference between them (P = 0.34, 0.24). A total of 28 samples of BALF were detected by PCR, and the positive detection rates of rats in the experimental group and control group were 91.7% (26/28) and 0, respectively. The sequence analysis of the PCR products showed that it shared 100% homology with the genes of rat source PCP in Gen Bank (JX499145, GU133622 and EF646865). The animal model of PCP can be established by subcutaneous injection with dexamethasone. As animal models, there are no significant difference between SD rats and Wistar rats. PCR method is suitable for PCP detection at the early stage of infection, while etiological detection with high missing rate is not a right option.
Many ethical, cultural, and economic concerns have accompanied the rapid growth of Western technology. Nuclear technology in particular has experienced considerable opposition because of its perceived dangers, especially disposal of atomic waste. While this field of science remains in its infancy, many legal, political and ecological groups oppose any further application of nuclear technology--including the significant medical, environmental, and economic benefits possible from a safe and responsible application of nuclear energy. Complete and objective knowledge of this technology is needed to balance a healthy respect for the danger of atomic power with its many advantages. This study focuses on one aspect of nuclear technology that has particularly aroused political and social controversy: nuclear waste. Finding ways of disposing safely of nuclear waste has become an extremely volatile issue because of the popular misconception that there is no permanent solution to this problem. This investigation will demonstrate that the supposedly enduring waste problem has been resolved in several industrial countries that now outstrip the United States in safe commercial applications of nuclear science. This dissertation offers a reasoned and objective contribution to the continuing national debate on the peaceful uses of nuclear technology. This debate becomes more crucial as the nation seeks a dependable substitute for the non-renewable sources of energy now rapidly being exhausted.
To evaluate the efficacy of health education on patients with hip replacement based on the Internet, and to establish a new health education model through modern technology. A total of 300 patients with hip replacement from March to August, 2015 were enrolled in this study. The participants were divided into a control group and an experimental group according to months surgeries performed. Traditional education was applied in the control group while the multimedia source material plus the Internet platform of Joint Registration System were applied in the experimental group. Levels of anxiety, degree of satisfaction, and postoperative complications were analyzed. The levels of knowledge, attitude and behavior compliance in the patients of the experimental group were significantly improved, while the levels of postoperative anxiety were decreased compared with those in the control group (P<0.05). Education based on the Internet platform of Joint Registration System and the computer video could improve patients' knowledge, attitude, and behavior, which is worthy of clinical spread.
The General Mission Analysis Tool (GMAT) is a space trajectory optimization and mission analysis system developed by NASA and private industry in the spirit of the NASA Mission. GMAT contains new technology and is a testbed for future technology development. The goal of the GMAT project is to develop new space trajectory optimization and mission design technology by working inclusively with ordinary people, universities, businesses, and other government organizations, and to share that technology in an open and unhindered way. GMAT is a free and open source software system licensed under the NASA Open Source Agreement: free for anyone to use in development of new mission concepts or to improve current missions, freely available in source code form for enhancement or further technology development.
The near-source region of a `lazy' turbulent buoyant plume issuing from a circular source is examined for source Richardson numbers in the range of 101 to 107. New data is acquired for the radial contraction and streamwise variation of volume flux through an experimental programme of dye visualisations and particle image velocimetry. This data reveals the limited applicability of traditional entrainment laws used in integral modelling approaches for the description of the near-source region for these source Richardson numbers. A revised entrainment function is proposed, based on which we introduce a classification of plume behaviour whereby the degree of `laziness' may be expressed in terms of the excess dilution that occurs compared to a `pure' constant Richardson number plume. The increased entrainment measured in lazy plumes is attributed to Rayleigh-Taylor instabilities developing along the contraction of the plume which promote the additional engulfment of ambient fluid into the plume. This work was funded by an EPSRC Industial Case Award sponsored by Dyson Technology Ltd. Special thanks go to the members of the Dyson Environmental Control Group that regularly visit us in Cambridge for discussions about our work.
A fundamental goal of the U.S. National Institute of Health (NIH) "Roadmap" is to strengthen Translational Research, defined as the movement of discoveries in basic research to application at the clinical level. A significant barrier to translational research is the lack of uniformly structured data across related biomedical domains. The Semantic Web is an extension of the current Web that enables navigation and meaningful use of digital resources by automatic processes. It is based on common formats that support aggregation and integration of data drawn from diverse sources. A variety of technologies have been built on this foundation that, together, support identifying, representing, and reasoning across a wide range of biomedical data. The Semantic Web Health Care and Life Sciences Interest Group (HCLSIG), set up within the framework of the World Wide Web Consortium, was launched to explore the application of these technologies in a variety of areas. Subgroups focus on making biomedical data available in RDF, working with biomedical ontologies, prototyping clinical decision support systems, working on drug safety and efficacy communication, and supporting disease researchers navigating and annotating the large amount of potentially relevant literature. We present a scenario that shows the value of the information environment the Semantic Web can support for aiding neuroscience researchers. We then report on several projects by members of the HCLSIG, in the process illustrating the range of Semantic Web technologies that have applications in areas of biomedicine. Semantic Web technologies present both promise and challenges. Current tools and standards are already adequate to implement components of the bench-to-bedside vision. On the other hand, these technologies are young. Gaps in standards and implementations still exist and adoption is limited by typical problems with early technology, such as the need for a critical mass of practitioners and installed base, and growing pains as the technology is scaled up. Still, the potential of interoperable knowledge sources for biomedicine, at the scale of the World Wide Web, merits continued work.
Background A fundamental goal of the U.S. National Institute of Health (NIH) "Roadmap" is to strengthen Translational Research, defined as the movement of discoveries in basic research to application at the clinical level. A significant barrier to translational research is the lack of uniformly structured data across related biomedical domains. The Semantic Web is an extension of the current Web that enables navigation and meaningful use of digital resources by automatic processes. It is based on common formats that support aggregation and integration of data drawn from diverse sources. A variety of technologies have been built on this foundation that, together, support identifying, representing, and reasoning across a wide range of biomedical data. The Semantic Web Health Care and Life Sciences Interest Group (HCLSIG), set up within the framework of the World Wide Web Consortium, was launched to explore the application of these technologies in a variety of areas. Subgroups focus on making biomedical data available in RDF, working with biomedical ontologies, prototyping clinical decision support systems, working on drug safety and efficacy communication, and supporting disease researchers navigating and annotating the large amount of potentially relevant literature. Results We present a scenario that shows the value of the information environment the Semantic Web can support for aiding neuroscience researchers. We then report on several projects by members of the HCLSIG, in the process illustrating the range of Semantic Web technologies that have applications in areas of biomedicine. Conclusion Semantic Web technologies present both promise and challenges. Current tools and standards are already adequate to implement components of the bench-to-bedside vision. On the other hand, these technologies are young. Gaps in standards and implementations still exist and adoption is limited by typical problems with early technology, such as the need for a critical mass of practitioners and installed base, and growing pains as the technology is scaled up. Still, the potential of interoperable knowledge sources for biomedicine, at the scale of the World Wide Web, merits continued work. PMID:17493285
Summary of current mobile source regulations and EPA mobile source regulatory authority with an emphasis on how EPA regulations are a driver for the development and introduction of automotive technology.
... application of the best available technology economically achievable (BAT). 434.83 Section 434.83 Protection... (CONTINUED) COAL MINING POINT SOURCE CATEGORY BPT, BAT, BCT LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS... technology economically achievable (BAT). Except as provided in 40 CFR 125.30 through 125.32, any existing...
... application of the best available technology economically achievable (BAT). 434.83 Section 434.83 Protection... (CONTINUED) COAL MINING POINT SOURCE CATEGORY BPT, BAT, BCT LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS... technology economically achievable (BAT). Except as provided in 40 CFR 125.30 through 125.32, any existing...
... application of the best available technology economically achievable (BAT). 434.83 Section 434.83 Protection... MINING POINT SOURCE CATEGORY BPT, BAT, BCT LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS Western... technology economically achievable (BAT). Except as provided in 40 CFR 125.30 through 125.32, any existing...
... application of the best available technology economically achievable (BAT). 434.83 Section 434.83 Protection... MINING POINT SOURCE CATEGORY BPT, BAT, BCT LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS Western... technology economically achievable (BAT). Except as provided in 40 CFR 125.30 through 125.32, any existing...
... application of the best available technology economically achievable (BAT). 434.83 Section 434.83 Protection... (CONTINUED) COAL MINING POINT SOURCE CATEGORY BPT, BAT, BCT LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS... technology economically achievable (BAT). Except as provided in 40 CFR 125.30 through 125.32, any existing...
... Standards for Hazardous Air Pollutants for Source Categories: Generic Maximum Achievable Control Technology... operator of an existing source has installed best available control technology (BACT) (as defined in section 169(3) of the Act) or technology required to meet a lowest achievable emission rate (LAER) (as...
... Standards for Hazardous Air Pollutants for Source Categories: Generic Maximum Achievable Control Technology... operator of an existing source has installed best available control technology (BACT) (as defined in section 169(3) of the Act) or technology required to meet a lowest achievable emission rate (LAER) (as...
... Standards for Hazardous Air Pollutants for Source Categories: Generic Maximum Achievable Control Technology... operator of an existing source has installed best available control technology (BACT) (as defined in section 169(3) of the Act) or technology required to meet a lowest achievable emission rate (LAER) (as...
... Standards for Hazardous Air Pollutants for Source Categories: Generic Maximum Achievable Control Technology... operator of an existing source has installed best available control technology (BACT) (as defined in section 169(3) of the Act) or technology required to meet a lowest achievable emission rate (LAER) (as...
... Standards for Hazardous Air Pollutants for Source Categories: Generic Maximum Achievable Control Technology... operator of an existing source has installed best available control technology (BACT) (as defined in section 169(3) of the Act) or technology required to meet a lowest achievable emission rate (LAER) (as...
Investigating the sociology of educational technology can be approached through a series of deliberations based on the interaction between Free/Libre Open Source Software (FLOSS) and Proprietary Close Source Software (PCSS). This article consults public policy discourses of the Fatih project, which is the current educational technology project in…
Lewis, Zakkoyya H; Ottenbacher, Kenneth J; Fisher, Steve R; Jennings, Kristofer; Brown, Arleen F; Swartz, Maria C; Martinez, Eloisa; Lyons, Elizabeth J
2017-08-14
Conducting 5 A's counseling in clinic and utilizing technology-based resources are recommended to promote physical activity but little is known about how to implement such an intervention. This investigation aimed to determine the feasibility and acceptability, using the RE-AIM (Reach, Effectiveness, Adoption, Implementation, Maintenance) framework, of a pragmatic, primary care-based intervention that incorporated 5 A's counseling and self-control through an activity monitor. Primary care patients (n = 40) 55-74 years of age were recruited and randomized to receive a pedometer or an electronic activity monitor (EAM), Jawbone UP24, to monitor activity for 12 weeks. Participants were also invited to a focus group after completing the intervention. Stakeholders (n = 36) were recruited to provide feedback. The intervention recruitment rate was 24.7%. The attrition rate was 20% with a significantly higher rate for the pedometer group (p = 0.02). The EAM group increased their minutes of physical activity by 11.1 min/day while the pedometer maintained their activity (0.2 min/day), with no significant group difference. EAM participants liked using their monitor and would continue wearing it while the pedometer group was neutral to these statements (p < 0.05). Over the 12 weeks there were 490 comments and 1094 "likes" given to study peers in the corresponding application for the UP24 monitor. Some EAM participants enjoyed the social interaction feature while others were uncomfortable talking to strangers. Participants stated they would want counseling from a counselor and not their physician or a nurse. Other notable comments included incorporating multiple health behaviors, more in-person counseling with a counselor, and having a funding source for sustainability. Overall, the study was well-received but the results raise a number of considerations. Practitioners, counselors, and researchers should consider the following before implementing a similar intervention: 1) utilize PA counselors, 2) target multiple health behaviors, 3) form a social support group, 4) identify a funding source for sustainability, and 5) be mindful of concerns with technology. clinicaltrials.gov- NCT02554435 . Registered 24 August 2015.
We report on the development and use of a high heralding-efficiency, single-mode-fiber coupled telecom-band source of entangled photons for quantum technology applications. The source development efforts consisted of theoretical and experimental efforts and we demonstrated a correlated-mode coupling efficiency of 97% 2%, the highest efficiency yet achieved for this type of system. We then incorporated these beneficial source development techniques in a Sagnac configured telecom-band entangled photon source that generates photon pairs entangled in both time/energy and polarization degrees of freedom. We made use of these highly desirable entangled states to investigate several promising quantum technologies.
Christ, John A.; Ramsburg, C. Andrew; Abriola, Linda M.; Pennell, Kurt D.; Löffler, Frank E.
2005-01-01
The infiltration of dense non-aqueous-phase liquids (DNAPLs) into the saturated subsurface typically produces a highly contaminated zone that serves as a long-term source of dissolved-phase groundwater contamination. Applications of aggressive physical–chemical technologies to such source zones may remove > 90% of the contaminant mass under favorable conditions. The remaining contaminant mass, however, can create a rebounding of aqueous-phase concentrations within the treated zone. Stimulation of microbial reductive dechlorination within the source zone after aggressive mass removal has recently been proposed as a promising staged-treatment remediation technology for transforming the remaining contaminant mass. This article reviews available laboratory and field evidence that supports the development of a treatment strategy that combines aggressive source-zone removal technologies with subsequent promotion of sustained microbial reductive dechlorination. Physical–chemical source-zone treatment technologies compatible with posttreatment stimulation of microbial activity are identified, and studies examining the requirements and controls (i.e., limits) of reductive dechlorination of chlorinated ethenes are investigated. Illustrative calculations are presented to explore the potential effects of source-zone management alternatives. Results suggest that, for the favorable conditions assumed in these calculations (i.e., statistical homogeneity of aquifer properties, known source-zone DNAPL distribution, and successful bioenhancement in the source zone), source longevity may be reduced by as much as an order of magnitude when physical–chemical source-zone treatment is coupled with reductive dechlorination. PMID:15811838
The purpose of this study was to gather information to identify the obstacles and the impact an implementation of technology had in a middle school science classroom. This study explored a teaching environment where the teacher planned on using a variety of technology tools including laptops, probeware, hardware and software to promote scientific study. This study took place in two phases consisting of three consecutive years. In phase one the teacher reported great success. In phase two a shift in the school implementation created a significant impact on the learning taking place. This study identified the obstacles faced by a teacher providing an environment that combined her pedagogy with technology implementation. This teacher's pedagogy included research-based practices such a authentic problem-based learning, scientific inquiry, conceptual understanding of problem solving, connections to real-life situations and the use of metacognition in her practice. This study looked to determined if this implementation had an effect on student engagement and achievement; how the nature of technical and professional development impacted the implementation; and the barriers that were faced in creating a student-centered, technology rich approach to science. This qualitative study was conducted meeting the criteria of a case study of one teacher. The participant teacher's accounts of events through interviews were the primary source of data. In addition, multiple sources of information were also gathered. These included the teacher's reflective journal, student interviews, student focus groups, student artifacts, classroom observations, field notes, e-mail correspondences and students' test scores. This study proposes to contribute to the growing research evidence of implementation in the classroom and to identify specific obstacles that hinder success. The current state of education is calling for reform.
An overview of high current (>1 mA) negative hydrogen ion (H-) sources that are currently used on particle accelerators. The current understanding of how H- ions are produced is summarised. Issues relating to caesium usage are explored. The different ways of expressing emittance and beam currents are clarified. Source technology naming conventions are defined and generalised descriptions of each source technology are provided. Examples of currently operating sources are outlined, with their current status and future outlook given. A comparative table is provided.
Hicks, S. D.; Aufdenkampe, A. K.; Horsburgh, J. S.; Arscott, D. B.; Muenz, T.; Bressler, D. W.
2016-12-01
The explosion in DIY open-source hardware and software has resulted in the development of affordable and accessible technologies, like drones and weather stations, that can greatly assist the general public in monitoring environmental health and its degradation. It is widely recognized that education and support of audiences in pursuit of STEM literacy and the application of emerging technologies is a challenge for the future of citizen science and for preparing high school graduates to be actively engaged in environmental stewardship. It is also clear that detecting environmental change/degradation over time and space will be greatly enhanced with expanded use of networked, remote monitoring technologies by watershed organizations and citizen scientists if data collection and reporting are properly carried out and curated. However, there are few focused efforts to link citizen scientists and school programs with these emerging tools. We have started a multi-year program to develop hardware and teaching materials for training students and citizen scientists about the use of open source hardware in environmental monitoring. Scientists and educators around the world have started building their own dataloggers and devices using a variety of boards based on open source electronics. This new hardware is now providing researchers with an inexpensive alternative to commercial data logging and transmission hardware. We will present a variety of hardware solutions using the Arduino-compatible EnviroDIY Mayfly board (http://envirodiy.org/mayfly) that can be used to build and deploy a rugged environmental monitoring station using a wide variety of sensors and options, giving the users a fully customizable device for making measurements almost anywhere. A database and visualization system is being developed that will allow the users to view and manage the data their devices are collecting. We will also present our plan for developing curricula and leading workshops to various school programs and citizen scientist groups to teach them how to build, deploy, and maintain their own environmental monitoring stations.
Accurate travel time information is required to efficiently plan and effectively manage transportation network. Technologies and : private data sources such as INRIX, TomTom and HERE offer the potential to continuously collect travel time data and us...
It is shown that technological products and processes resulting from aeronautical and space research and development can be a significant source of new product or product improvement ideas. The problems associated with technology transfer are discussed. As an example, the commercialization of NASTRAN, NASA's structural analysis computer program, is discussed. Some other current application projects are also outlined.
The aim of this study was to explore everyday thinking about the UK electricity network, in light of government policy to increase the generation of electricity from renewable energy sources. Existing literature on public perceptions of electricity network technologies was broadened by adopting a more socially embedded conception of the construction of knowledge using the theory of social representations (SRT) to explore symbolic associations with network technologies. Drawing and association tasks were administered within nine discussion groups held in two places: a Scottish town where significant upgrades to the local transmission network were planned and an English city with no such plans. Our results illustrate the ways in which network technologies, such as high voltage (HV) pylons, are objectified in talk and drawings. These invoked positive as well as negative symbolic and affective associations, both at the level of specific pylons, and the 'National Grid' as a whole and are anchored in understanding of other networks such as mobile telecommunications. We conclude that visual methods are especially useful for exploring beliefs about technologies that are widespread, proximal to our everyday experience but nevertheless unfamiliar topics of everyday conversation.
Background There is a critical need to expand the pool of available kidneys for African Americans who are on the transplant wait-list due to the disproportionally lower availability of deceased donor kidneys compared with other races/ethnic groups. Encouraging living donation is one method to fill this need. Incorporating mHealth strategies may be a way to deliver educational and supportive services to African American transplant-eligible patients and improve reach to those living in remote areas or unable to attend traditional group-session-based programs. Before program development, it is essential to perform formative research with target populations to determine acceptability and cultivate a patient-centered and culturally relevant approach to be used for program development. Objective The objectives of this study were to investigate African American kidney transplant recipients’ and kidney donors’/potential donors’ attitudes and perceptions toward mobile technology and its viability in an mHealth program aimed at educating patients about the process of living kidney donation. Methods Using frameworks from the technology acceptance model and self-determination theory, 9 focus groups (n=57) were administered to African Americans at a southeastern medical center, which included deceased/living donor kidney recipients and living donors/potential donors. After a demonstration of a tablet-based video education session and explanation of a group-based videoconferencing session, focus groups examined members’ perceptions about how educational messages should be presented on topics pertaining to the process of living kidney donation and the transplantation. Questionnaires were administered on technology use and perceptions of the potential program communication platform. Transcripts were coded and themes were examined using NVivo 10 software. Results Qualitative findings found 5 major themes common among all participants. These included the following: (1) strong support for mobile technology use; (2) different media formats were preferred; (3) willingness to engage in video chats, but face-to-face interaction sometimes preferred; (4) media needs to be user friendly; (5) high prevalence of technology access. Our results show that recipients were willing to spend more time on education than the donors group, they wanted to build conversation skills to approach others, and preferred getting information from many sources, whereas the donor group wanted to hear from other living donors. The questionnaires revealed 85% or more of the sample scored 4+ on a 5-point Likert scale, which indicates high degree of interest to use the proposed program, belief that other mHealth technologies would help with adherence to medical regimens, and doctors would make regimen adjustments quicker. In addition, high utilization of mobile technology was reported; 71.9% of the participants had a mobile phone and 43.9% had a tablet. Conclusions Our study supports the use of an mHealth education platform for African Americans to learn about living donation. However, potential recipients and potential donors have differing needs, and therefore, programs should be tailored to each target audience. PMID:26265532
Our group has been developing x-ray microcalorimeters consisting of neutron transmutation doped (NTD) germanium thermistors attached to superconducting tin absorbers. We discuss the performance of single pixel x-ray detectors, and describe an array technology. In this paper we describe the read-out circuit that allows us to measure fast signals in our detectors as this will be important in understanding the primary cause of resolution broadening. We describe briefly a multiplexing scheme that allows a number of different calorimeters to be read out using a single JFET. We list the possible causes of broadening and give a description of the experiment which best demonstrates the cause of the primary broadening source. We mention our strategy for finding a suitable solution to this problem and describe briefly a technology for building arrays of these calorimeters.
Due to the easier access to information, the availability of low cost technologies and the involvement of well educated, passionate patients, a group of citizen 'Health Hackers', who are building their own medical systems to help them overcome the unmet needs of their conditions, is emerging. This has recently been the case in the type 1 diabetes community, under the movement #WeAreNotWaiting, with innovative use of current medical devices hacked to access data and Open-Source code producing solutions ranging from remote monitoring of diabetic children to producing an Artificial Pancreas System to automate the management and monitoring of a patient's condition. Timothy Omer is working with the community to utilise the technology already in his pocket to build a mobile- and smartwatch-based Artificial Pancreas System.
This presentation briefly summarizes some of what is known and not known about the occurrence of drugs in the environment, the potential for chronic effects on wildlife (and some instances of acute effects), the relevance of drug residues in drinking water to consumer risk perception, and actions that can be taken to reduce environmental exposure. Efforts are underway at U.S. federal agencies such as the USGS, FDA, USDA, NOAA, NIEHS, and the CDC, as well as the EPA. This work is beginning to be coordinated under an Interagency Task Group (PiE: Pharmaceuticals in the Environment), which was chartered under a subcommittee of OSTP's (National Science and Technology Council) Committee on Environment and Natural Resources (http://www.ostp.gov/NSTC/html/committee/cenr.html). The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analy
This presentation briefly summarizes some of what is known and not known about the occurrence of drugs in the environment, the potential for chronic effects on wildlife (and some instances of acute effects), the relevance of drug residues in drinking water to consumer risk perception, and actions that can be taken to reduce environmental exposure. Efforts are underway at U.S. federal agencies such as the USGS, FDA, USDA, NOAA, NIEHS, and the CDC, as well as the EPA. This work is beginning to be coordinated under an Interagency Task Group (PiE: Pharmaceuticals in the Environment), which was chartered under a subcommittee of OSTP¿s (National Science and Technology Council) Committee on Environment and Natural Resources (http://www.ostp.gov/NSTC/html/committee/cenr.html). The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of an
Ruble, Lisa A.; McGrew, John H.; Toland, Michael D.; Dalrymple, Nancy J.; Jung, Lee Ann
2013-01-01
Objective Most children with autism rely on schools as their primary source of intervention, yet research has suggested that teachers rarely use evidence-based practices. To address the need for improved educational outcomes, a previously tested consultation intervention called the Collaborative Model for Promoting Competence and Success (COMPASS; Ruble, Dalrymple, & McGrew, 2010; Ruble, Dalrymple, & McGrew, 2012) was evaluated in a 2nd randomized controlled trial, with the addition of a web-based group. Method Forty-nine teacher–child dyads were randomized into 1 of 3 groups: (1) a placebo control (PBO) group, (2) COMPASS followed by face-to-face (FF) coaching sessions, and (3) COMPASS followed by web-based (WEB) coaching sessions. Three individualized goals (social, communication, and independence skills) were selected for intervention for each child. The primary outcome of independent ratings of child goal attainment and several process measures (e.g., consultant and teacher fidelity) were evaluated. Results Using an intent-to-treat approach, findings replicated earlier results with a very large effect size (d = 1.41) for the FF group and a large effect size (d = 1.12) for the WEB group relative to the PBO group. There were no differences in overall change across goal domains between the FF and WEB groups, suggesting the efficacy of videoconferencing technology. Conclusions COMPASS is effective and results in improved educational outcomes for young children with autism. Videoconferencing technology, as a scalable tool, has promise for facilitating access to autism specialists and bridging the research-to-practice gap. PMID:23438314
The Field Operations and Enforcement Manual for Air Pollution Control, Volume II, explains in detail the following: technology of source control, modification of operations, particulate control equipment, sulfur dioxide removal systems for power plants, and control equipment for gases and vapors; inspection procedures for general sources, fuel…
PORTRAN-II; FORTRAN -IV; and ALGOL-60 dialect. BASIC language may be used when solving problems in the interactive mode (the stages of...transmissions and broadcasts. Materials from foreign-language sources are translated; those from English-language sources are transcribed or reprinted, with... source . Times within items are as given by source . The contents of this publication in no way represent the poli- cies, views or attitudes of the U.S
Subcommittee on Water Availability and Quality Microbial source tracking to identify the source of fecal contamination Many of the Nation’s resource...water- quality health standards. In addition, identi- fication of fecal sources is relevant to source-water protection programs and to the development...estuaries, snowpack, and soil . • Develop sensors and systems to measure water quality inexpensively in real time. Develop innovative water-use technologies
This viewgraph presentation reviews the multiplier source technologies and the status/Performance of THz multiplier sources. An example of a THz application is imaging radar. The presentation reviews areas of requirements for THz sources: (1) Figures of merit, (i.e., Frequency Terahertz for high resolution Bandwidth of at least 15 GHz for high range resolution Efficiency (i.e., minimize power supply requirements) (2) Output power: (i.e., Milliwatts below 800 GHz, 10s of microwatts above 1 THz, 1-2 microwatts near 2 THz (3) Mechanical--stability, compact, low mass (4) Environmental -- radiation, vibration, thermal. Several sources for 0.3 - 2 THz are reviewed: FIR lasers, quantum cascade lasers (QCL), backward-wave oscillator (BWO), and Multiplier sources. The current state of the art (SoA) is shown as Substrateless Technology. It also shows where the SoA is for devices beyond 1 THz. The presentation concludes by reviewing the options for future development, and 2 technology roadmaps
This Policy Paper recommends the actions deemed necessary to assure that future U.S. and non-Communist countries' nuclear fuels supply will be adequate, considering the following: estimates of modest growth in overall energy demand, electrical energy demand, and nuclear electrical energy demand in the U.S. and abroad, predicated upon the continuing trends involving conservation of energy, increased use of electricity, and moderate economic growth (Chap. I); possibilities for the development and use of all domestic resources providing energy alternatives to imported oil and gas, consonant with current environmental, health, and safety concerns (Chap. II); assessment of the traditional energy sources whichmore » provide current alternatives to nuclear energy (Chap. II); evaluation of realistic expectations for additional future energy supplies from prospective technologies: enhanced recovery from traditional sources and development and use of oil shales and synthetic fuels from coal, fusion and solar energy (Chap. II); an accounting of established nuclear technology in use today, in particular the light water reactor, used for generating electricity (Chap. III); an estimate of future nuclear technology, in particular the prospective fast breeder (Chap. IV); current and projected nuclear fuel demand and supply in the U.S. and abroad (Chaps. V and VI); the constraints encountered today in meeting nuclear fuels demand (Chap. VII); and the major unresolved issues and options in nuclear fuels supply and use (Chap. VIII). The principal conclusions and recommendations (Chap. IX) are that the U.S. and other industrialized countries should strive for increased flexibility of primary energy fuel sources, and that a balanced energy strategy therefore depends on the secure supply of energy resources and the ability to substitute one form of fuel for another.« less
An issue that began to receive more attention by environmental scientists in the late 1990s was the conveyancy of pharmaceuticals in the environment by way of their use in human and veterinary medical practices and personal care The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, intervi
There is no abstract for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. Subtask 3: T
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact Field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
A compact gamma-beam source dedicated to the development of the nuclear security technologies by use of the nuclear resonance fluorescence is described. Besides, such source is a very promising tool for novel technologies of the express cargoes inspection to prevent nuclear terrorism. Gamma-beam with the quanta energies from 0.3MeV to 7.2MeV is generated in the Compton scattering of the "green" laser photons on the electron beam with energies from 90MeV to 430MeV. The characteristic property of the proposed gammabeam source is a narrow spectrum (less than 1%) at high average gamma-yield (of 1013γ/s) due to special operation mode.
Because of the inherent advantages of high efficiency, environmental acceptability, and high modularity, fuel cells are potentially attractive power supplies. Worldwide concerns over clean environments have revitalized research efforts on developing fuel cell vehicles (FCV). As a result of intensive research efforts, most of the subsystem technology for FCV`s are currently well established. These include: high power density PEM fuel cells, control systems, thermal management technology, and secondary power sources for hybrid operation. For mobile applications, however, supply of hydrogen or fuel for fuel cell operation poses a significant logistic problem. To supply high purity hydrogen for FCV operation, Thermomore » Power`s Advanced Technology Group is developing an advanced hydrogen storage technology. In this approach, a metal hydride/organic slurry is used as the hydrogen carrier and storage media. At the point of use, high purity hydrogen will be produced by reacting the metal hydride/organic slurry with water. In addition, Thermo Power has conceived the paths for recovery and regeneration of the spent hydride (practically metal hydroxide). The fluid-like nature of the spent hydride/organic slurry will provide a unique opportunity for pumping, transporting, and storing these materials. The final product of the program will be a user-friendly and relatively high energy storage density hydrogen supply system for fuel cell operation. In addition, the spent hydride can relatively easily be collected at the pumping station and regenerated utilizing renewable sources, such as biomass, natural, or coal, at the central processing plants. Therefore, the entire process will be economically favorable and environmentally friendly.« less
The chapter discusses the use of technologies for reducing air pollution emissions from stationary sources, with emphasis on the control of combustion gen-erated air pollution. Major stationary sources include utility power boilers, industrial boilers and heaters, metal smelting ...
This paper presents a high-performance AC power source by applying robust stability control technology for precision material machining (PMM). The proposed technology associates the benefits of finite-time convergent sliding function (FTCSF) and firefly optimization algorithm (FOA). The FTCSF maintains the robustness of conventional sliding mode, and simultaneously speeds up the convergence speed of the system state. Unfortunately, when a highly nonlinear loading is applied, the chatter will occur. The chatter results in high total harmonic distortion (THD) output voltage of AC power source, and even deteriorates the stability of PMM. The FOA is therefore used to remove the chatter, and the FTCSF still preserves finite system-state convergence time. By combining FTCSF with FOA, the AC power source of PMM can yield good steady-state and transient performance. Experimental results are performed in support of the proposed technology.
Hosseini, Seyed Abolfazl; Afrakoti, Iman Esmaili Paeen
2017-04-01
Accurate unfolding of the energy spectrum of a neutron source gives important information about unknown neutron sources. The obtained information is useful in many areas like nuclear safeguards, nuclear nonproliferation, and homeland security. In the present study, the energy spectrum of a poly-energetic fast neutron source is reconstructed using the developed computational codes based on the Group Method of Data Handling (GMDH) and Decision Tree (DT) algorithms. The neutron pulse height distribution (neutron response function) in the considered NE-213 liquid organic scintillator has been simulated using the developed MCNPX-ESUT computational code (MCNPX-Energy engineering of Sharif University of Technology). The developed computational codes based on the GMDH and DT algorithms use some data for training, testing and validation steps. In order to prepare the required data, 4000 randomly generated energy spectra distributed over 52 bins are used. The randomly generated energy spectra and the simulated neutron pulse height distributions by MCNPX-ESUT for each energy spectrum are used as the output and input data. Since there is no need to solve the inverse problem with an ill-conditioned response matrix, the unfolded energy spectrum has the highest accuracy. The 241Am-9Be and 252Cf neutron sources are used in the validation step of the calculation. The unfolded energy spectra for the used fast neutron sources have an excellent agreement with the reference ones. Also, the accuracy of the unfolded energy spectra obtained using the GMDH is slightly better than those obtained from the DT. The results obtained in the present study have good accuracy in comparison with the previously published paper based on the logsig and tansig transfer functions.
In Japan, energy efficient fluorescent lamp systems which use “rare-earth phosphors” and “electronic ballasts” have shown rapid diffusion since 1990s. This report investigated sources of technological change in the efficiency improvement of fluorescent lamp systems: (i) Fluorescent lamp and luminaires have been under steady technological development for getting more energy efficient lighting and the concepts to achieve high efficiency had been found in such activities; however, it took long time until they realized and become widely used; (ii) Electronic ballasts and rare-earth phosphors add fluorescent lamp systems not only energy efficiency but also various values such as compactness, lightweight, higher output, and better color rendering properties, which have also been expected and have induced research and development (R&D) (iii) Affordable electronic ballasts are realized by the new technology “power MOSFET” which is based on IC technologies and has been developed for large markets of information and communication technologies and mobile devices; and (iv) Rare-earth phosphors became available after rare-earth industries developed for the purpose of supplying rare-earth phosphors for color television. In terms of sources of technological change, (i) corresponds to “R&D” aiming at the particular purpose i.e. energy efficiency in this case, on the other hand, (ii), (iii), and (iv) correspond to “spillovers” from activities aiming at other purposes. This case exhibits an actual example in which “spillovers” were the critical sources of technological change in energy technology.
Ames Research Center awarded inXitu Inc. (formerly Microwave Power Technology), of Mountain View, California, an SBIR contract to develop a new design of electron optics for forming and focusing electron beams that is applicable to a broad class of vacuum electron devices. This technology offers an inherently rugged and more efficient X-ray source for material analysis; a compact and rugged X-ray source for smaller rovers on future Mars missions; and electron beam sources to reduce undesirable emissions from small, widely distributed pollution sources; and remediation of polluted sites.
In association with the development of new microbial tests for source water quality (SWQ), focus groups with members of the public were conducted to gain insight into their perceptions of SWQ, behaviours and contaminants they think pose the greatest threat to its quality, and what/how they want to know about SWQ. Discussions revealed a low concern about SWQ in general, and in particular about microbial contamination. Participants identified behaviours that threaten SWQ, barriers to changing behaviour and suggestions for inducing change. A strong desire was expressed for water quality information to be interpreted and communicated in terms of how SWQ may impact human health and how their actions should be altered in response to test results. The information can be used to inform communication strategies and possibly impact policies associated with water quality testing and implementation of new tests. More broadly, awareness of the public’s understanding and beliefs about source water can be used in working with the public to adopt water-friendly behaviours, influence the content and methods of communicating with the public about water issues and water quality, and could contribute to the direction of future research and investment into water technologies to align with the public’s priorities. PMID:26540561
In association with the development of new microbial tests for source water quality (SWQ), focus groups with members of the public were conducted to gain insight into their perceptions of SWQ, behaviours and contaminants they think pose the greatest threat to its quality, and what/how they want to know about SWQ. Discussions revealed a low concern about SWQ in general, and in particular about microbial contamination. Participants identified behaviours that threaten SWQ, barriers to changing behaviour and suggestions for inducing change. A strong desire was expressed for water quality information to be interpreted and communicated in terms of how SWQ may impact human health and how their actions should be altered in response to test results. The information can be used to inform communication strategies and possibly impact policies associated with water quality testing and implementation of new tests. More broadly, awareness of the public's understanding and beliefs about source water can be used in working with the public to adopt water-friendly behaviours, influence the content and methods of communicating with the public about water issues and water quality, and could contribute to the direction of future research and investment into water technologies to align with the public's priorities.
This research study provides a platform for extending the body of knowledge associated with the sourcing of Information Technology (IT) in the legal environment determined by the Sarbanes-Oxley Act. This analysis of IT sourcing was conducted via consideration of legal and situational factors which may influence an IT manager's decision to…
This study investigated the impact of technology-based advance organizers (TBAOs) on the academic performance of 240 4th grade English learners (ELs) participating in a science class in School in the Park (SITP), a museum-school collaboration. While SITP provides a rich, hands-on learning environment, ELs face significant linguistic challenges in their ability to access the dense academic language and concepts provided in SITP's English only curriculum, thus negatively impacting ELs' engagement and learning. The TBAOs were designed in response to this issue. The study investigated two forms of treatment: TBAOs viewed on individual handheld mobile devices (HMDs), specifically iPods; and, TBAOs viewed as a whole class on DVD. The study utilized both qualitative and quantitative data sources, including a pre- and posttest, hands-on and performance-based assessments, as well as focus interviews. Results showed a significant interaction effect between group assignment, language status and application assessments, indicating ELs performed significantly better in the treatment groups. Students who used the HMD instead of the DVD or no treatment improved their total scores significantly on hands-on, performance-based measurements. Differences between treatment and control groups' performance on pre-/posttests approached significance. Furthermore, students reported TBAOs supported learning by introducing new material, introducing and reviewing daily academic vocabulary, and helping them anticipate behavioral and procedural expectations of hands-on activities. Classroom and museum educators reported an increase in the treatment groups' motivation and engagement. The study provided important implications in the use and power of learner-controlled technology in supporting ELs' linguistic and academic success.
Background and purpose Accelerated partial breast irradiation (APBI) technology has theoretical advantages in comparison with traditional adjuvant radiation therapy (whole-breast irradiation; WBI) after breast-conserving surgery. However, published randomized controlled trials have shown inconsistent outcomes. Therefore, a comprehensive assessment of the effectiveness and safety of APBI technology is needed. Results A total of 7 studies of 7452 patients were included in this analysis. All 7 studies reported local recurrence as an outcome. Meta-analysis of 5 trials that included 6486 patients showed significantly different 5-year local recurrence rates for APBI and WBI groups (hazard ratio = 4.54, 95% confidence interval: 1.78–11.61, p = 0.002). Further analysis showed that this difference may be related to the choice of treatment methods. Benefit was conferred to the APBI group for the outcome of non-breast cancer deaths. There was no significant difference between the two groups in terms of nodal recurrence, systemic recurrence, overall survival, or mortality rates. Toxicity side effects and cosmetic effects were similar in both groups, but intraoperative radiotherapy seemed to have a greater acute response. Material and methods Searches for relevant randomized controlled trials of APBI versus WBI were performed using the following sources: PubMed, EMBASE, Cochrane Library, Web of Science. Two independent observers evaluated the identified studies. The meta-analysis was conducted using RevMan 5.2 software. Conclusions Although the analysis showed that patients receiving APBI had a higher local recurrence rate, subgroup analyses suggested that this might be related to treatment options. Patients who receive accurate radiotherapy may have greater benefits. APBI is a promising treatment technology and more phase III clinical trials are expected based on new treatments. PMID:28938661
EUV has long been hailed as the next generation lithography technology. Its adoption into high volume manufacturing (HVM), however, has been delayed several technology nodes due to technical issues, many of which can be attributed to the EUV source performance. Today's EUV lithography scanners are powered by laser produce plasma (LPP) sources. They have issues with power scaling beyond 300 W, reliability and contamination. Free Electron Lasers (FELs) have been considered as an alternative EUV source. Advantages of accelerator based sources are the maturity of the accelerator technology, lack of debris/contamination, and ability to provide high power. Industry turned away from this technology because of the requirement to feed up to 10 scanners from one linear FEL to make it economically feasible, the large footprint, and generation of radioactive byproducts. All of these issues are overcome in the presented concept using a compact storage ring with steady-state FEL lasing action. At 1 kW output power, comparable cost and footprint to an LPP source, this source is ideally suited for use on a single scanner and promises reliable, contamination free operation. FEL action in the storage ring is sustained by operating the FEL well below the saturation regime and preserving the equilibrium low emittance and energy distribution of the ring.
Pathogens such as viruses and bacteria are among the greatest threats to human health worldwide. In today's era of population growth and international travel, new technologies are desperately needed to combat the spread of known and emerging pathogens. This book presents a new concept for pathogen inactivation called selective photonic disinfection (SEPHODIS). The SEPHODIS technology inactivates pathogens by mechanical means, a total paradigm shift from traditional chemical and physical methods. The unique strength of SEPHODIS resides in its capability to inactivate pathogens while preserving desirable materials such as human cells and proteins. The technology also avoids the need to use chemicals, drastically reducing the risk of side effects. These properties make SEPHODIS ideal for important biomedical applications such as safeguarding blood products and therapeutics against pathogens, as well as producing effective and safe vaccines to combat infectious disease. Written in a style that is both technically informative and easy to comprehend for the layman reader, this book illustrates the story of SEPHODIS from its initial discovery and bench studies to its real-world applications. EpsteinJ SVostalJ G2003FDA approach to evaluation of pathogen reduction technologyTransfusion 43 134713491347-910.1046/j.1537-2995.2003.00584.xSalunkheVvan der MeerP Fde KorteDSeghatchianJGutierrezL2015Development of blood transfusion product pathogen reduction treatments: a review of methods, current applications and demandsTransfus. Apher. Sci. 52 193419-3410.1016/j.transci.2014.12.016SandersBKoldijkMSchuitemakerH2015Inactivated viral vaccinesVaccine Analysis: Strategies, Principles, and ControlNunnallyB KTurulaV ESitrin RDR DBerlinSpringerpp458045-80GaffneyK JDavisP HPileticI RLevingerN EFayerM D2002Hydrogen bond dissociation and reformation in methanol oligomers following hydroxyl stretch relaxationJ. Phys. Chem. A 106 120121202312012-2310.1021/jp021696gO'ConnellCSherlockRBallM DAszalos-KissBPrendergastUGlynnT J2009Investigation of the hydrophobic recovery of various polymeric biomaterials after 172 nm UV treatment using contact angle, surface free energy and XPS measurementsAppl. Surf. Sci. 255 440544134405-1310.1016/j.apsusc.2008.11.034DykemanE CSankeyO F2010Atomistic modeling of the low-frequency mechanical modes and Raman spectra of icosahedral virus capsidsPhys. Rev. E 81 02191810.1103/PhysRevE.81.021918YanY XGambleE BNelsonK A1985Impulsive stimulated scattering: general importance in femtosecond laser pulse interactions with matter, and spectroscopic applicationsJ. Chem. Phys. 83 539153995391-910.1063/1.449708TsenK TDykemanE CSankeyO FTsenS W DKiangJ G2009Contemporary Trends in Bacteriophage ResearchAdamsH THauppauge, NYNova Science Publisherspp151177151-77ArfkenG1970Mathematical Methods for Physicists2nd ednNew YorkAcademicDavydovA S1965Quantum MechanicsPalo Alto, CAAddison-WesleyNelsonK AMillerR J DLutzD RFayerM D1982Optical generation of tunable ultrasonic wavesJ. Appl. Phys. 53 114411491144-910.1063/1.329864De SilvestriSFujimotoJ GIppenE P1985Femtosecond time-resolved measurements of optic phonon dephasing by impulsive stimulated Raman scattering in α-perylene crystal from 20 to 300 KChem. Phys. Lett. 116 146152146-5210.1016/0009-2614(85)80143-3NelsonK A1982Stimulated Brillouin scattering and optical excitation of coherent shear wavesJ. Appl. Phys. 53 606060636060-310.1063/1.331556ChoG CKuttWKurzH1990Subpicosecond time-resolved coherent-phonon oscillations in GaAsPhys. Rev. Lett. 65 764766764-610.1103/PhysRevLett.65.764ChengT KVidalJZeigerH JDresselhausGDresselhausM SIppenE P1991Mechanism for displacive excitation of coherent phonons in Sb, Bi, Te, and Ti2O3 Appl. Phys. Lett. 59 192319251923-510.1063/1.106187ChwalekJ MUherCWhittakerJ FMourouG A1991Subpicosecond time resolved studies of coherent phonon oscillations in thin-film YBa2Cu3O6 + x(x<0.4)Appl. Phys. Lett. 58 980982980-2MerlinR1997Generating coherent THz phonons with light pulsesSolid State Commun. 102 207220207-2010.1016/S0038-1098(96)00721-1TsenK TTsenS WChangC LHungC FWuT CKiangJ G2007Inactivation of viruses by coherent excitations with a low power visible femtosecond laserVirology J 4 151-510.1186/1743-422X-4-50TsenK TTsenS WChangC LHungC FWuT CKiangJ G2007Inactivation of viruses by laser-driven coherent excitations via impulsive stimulated Raman scattering processJ. Biomed. Opt. 12 06403010.1117/1.2821713TsenK TTsenS WChangC LHungC FWuT CKiangG2007Inactivation of viruses with a very low power visible femtosecond laserJ. Phys.: Condens. Matter 19 32210210.1088/0953-8984/19/32/322102EisbergR M1961Fundamentals of Modern PhysicsNew YorkWileyHayesWLoudonR1978Scattering of Light by CrystalsNew YorkWileySee, for example, www.epa.gov/rpdweb00/understand/ionize_nonionize.htmlCadetaJSagebEDoukiaT2005Ultraviolet radiation-mediated damage to cellular DNAMutat. Res. 571 3173-1710.1016/j.mrfmmm.2004.09.012ChanH LGaffneyP RWaterfieldM DAnderlecHMatthiessenH PSchwarzH PTurecekP LTimmsJ F2006Proteomic analysis of UVC irradiation-induced damage of plasma proteins: serum amyloid P component as a major target of photolysisFEBS Lett. 580 322932363229-3610.1016/j.febslet.2006.05.002MichnikAMichalikKDrzazgaZ2008Effect of UVC radiation on conformational restructuring of human serum albuminJ. Photochem. Photobiol. B 90 170178170-810.1016/j.jphotobiol.2007.12.007SegelsteinD J1981The complex refractive index of water MS thesis University of Missouri-Kansas City (for a review, see http://omlc.org/spectra/water/)AinslieM AMcColmJ GA simplified formula for viscous and chemical absorption in sea waterJ. Acoust. Soc. Am. 103 167116721671-210.1121/1.421258MyersA BMathiesR A1987Biological Applications of Raman Spectroscopy(vol 2)Resonance Raman Spectra of Polyenes and AromaticsSpiroT GNew YorkWileych 1TsenK TDykemanE CSankeyO FTsenS W DKiangJ G2009Inactivation of viruses with femtosecond laser pulses Contemporary Trends in Bacteriophage Research AdamsH THauppauge, NYNova Science Publishers15177151-77DykemanE CSankeyO F2010Atomistic modeling of the low-frequency mechanical modes and Raman spectra of icosahedral virus capsidsPhys. Rev. E 81 02191810.1103/PhysRevE.81.021918KhosrofianJ MGaretzB A1983Measurement of a Gaussian laser beam diameter through the direct inversion of knife-edge dataAppl. Opt. 22 3406103406-1010.1364/AO.22.003406BornMWolfE1999Principles of OpticsCambridgeCambridge University PressTsenS WKingsleyD HPoweleitCAchilefuSSorokaDWuT CTsenK T2014Studies of inactivation mechanism of non-enveloped icosahedral virus by a visible ultrashort pulsed laserVirol. J. 11 2010.1186/1743-422X-11-20TsenK TTsenS WFuQLindsayS MLiZCopeSVaianaSKiangJ G2011Studies of inactivation of encephalomyocarditis virus, M13 bacteriophage, and Salmonella typhimurium by using a visible femtosecond laser: insight into the possible inactivation mechanismsJ. Biomed. Opt. 16 07800310.1117/1.3600771GaffneyK JDavisP HPileticI RLevingerN EFayerM D2002Hydrogen bond dissociation and reformation in methanol oligomers following hydroxyl stretch relaxationJ. Phys. Chem. A 106 120122312012-2310.1021/jp021696gO'ConnellCSherlockRBallM DAszalos-KissBPrendergastUGlynnT J2009Investigation of the hydrophobic recovery of various polymeric biomaterials after 172 nm UV treatment using contact angle, surface free energy and XPS measurementsAppl. Surf. Sci. 255 4405134405-1310.1016/j.apsusc.2008.11.034YanY XGambleE BNelsonK A1985Impulsive stimulated scattering: general importance in femtosecond laser pulse interactions with matter, and spectroscopic applicationsJ. Chem. Phys. 83 5391995391-9910.1063/1.449708BoustieMBertheLde ResseguierTArrigoniM2008Laser shock waves: fundamentals and applications 1st Int. Symp. On Laser Ultrasonics: Science, Technology and Applications (National Research Council of Canada, Montreal) paper 1 and references thereinwww.optics.rochester.edu/workgroups/boyd/assets/pdf/publications/nlomater.pdfCannonJ LPapafragkouEParkG WOsborneJJaykusL AVinjeJ2006Surrogates for the study of norovirus stability and inactivation in the environment: a comparison of murine norovirus and feline calicivirusJ. Food Prot. 69 276152761-5TsenS WWuT CKiangJ GTsenK T2012Prospects for a novel ultrashort pulsed laser technology for pathogen inactivationJ. Biomed. Sci. 19 6210.1186/1423-0127-19-62TsenS WChapaTBeattyWTsenK TYuDAchilefuS2012Inactivation of enveloped virus by laser-driven protein aggregationJ. Biomed. Opt. 17 12800210.1117/1.JBO.17.12.128002KattenhornL MMillsRWagnerMLomsadzeAMakeevVBorodovskyMPloeghH LKesslerB M2004Identification of proteins associated with murine cytomegalovirus virionsJ. Virol. 78 111871119711187-9710.1128/JVI.78.20.11187-11197.2004RappMMesserleMBuhlerBTannheimerMKeilG MKosziniowskiU H1992Identification of the murine cytomegalovirus glycoprotein B gene and its expression by recombinant vaccinia virusJ. Virol. 66 439944064399-406XuJDallasP BLyonsP AShellamG RScalzoA A1992Identification of the glycoprotein H gene of murine cytomegalovirusJ. Gen. Virol. 73 184918541849-5410.1099/0022-1317-73-7-1849ScalzoA AForbesC ADavis-PoynterN JFarrellH ELyonsP A1995DNA sequence and transcriptional analysis of the glycoprotein M gene of murine cytomegalovirusJ. Gen. Virol. 76 289529012895-90110.1099/0022-1317-76-11-2895UverskyV NFernandezAFinkA L2006Protein Reviews(vol 4)UverskyV NFinkA LNew YorkSpringerTsenS WChapaTBeattyWXuBTsenK TAchilefuS2014Ultrashort pulsed laser treatment inactivates viruses by inhibiting viral replication and transcription in the host nucleusAntiviral Res. 110 707670-610.1016/j.antiviral.2014.07.012ShellanG RRedwoodA JSmithL MGormanS2006 The Mouse in Biomedical Research (New York: Academic)BrittW JAlfordC A1996 Fields Virology (Philadelphia, PA: Lippincott-Raven)PrestonV GMurrayJPrestonC MMcDougallI MStowN D2008The UL25 gene product of herpes simplex virus type 1 is involved in uncoating of the viral genomeJ. Virol. 82 665466666654-6610.1128/JVI.00257-08LuC HLinK HHsuY YTsenK TKuanY S2014Inhibition of Escherichia Coli respiratory enzymes by short visible femtosecond laser irradiationJ. Phys. D: Appl. Phys. 47 31540210.1088/0022-3727/47/31/315402MacleanMMacGregorS JAndersonJ GWoolseyG2008High-intensity narrow-spectrum light inactivation and wavelength sensitivity of Staphylococcus aureus FEMS Microbiol. Lett. 285 227232227-3210.1111/j.1574-6968.2008.01233.xBryantJKleinH G2007Pathogen inactivation: the definitive safeguard for the blood supplyArch. Pathol. Lab. Med. 131 71933719-33SalunkheVvan der MeerP Fde KorteDSeghatchianJGutierrezL2015Development of blood transfusion product pathogen reduction treatments: a review of methods, current applications and demandsTransfus. Apher. Sci. 52 193419-3410.1016/j.transci.2014.12.016AuBuchonJ P2011Update on the status of pathogen inactivation methodsISBT Sci. Series 6 1818181-810.1111/j.1751-2824.2011.01471.xAuBuchonJ P2011Breathing easy with pathogen inactivationBlood 117 74950749-5010.1182/blood-2010-11-313379StramerS LHollingerF BKatzL MKleinmanSMetzelP SGregoryK RDoddR Y2009Emerging infectious disease agents and their potential threat to transfusion safetyTransfusion 49 1S49S1S-49S10.1111/j.1537-2995.2009.02279.xProwseC2009Properties of pathogen-inactivated plasma componentsTransf. Med. Rev 23 124133124-3310.1016/j.tmrv.2008.12.004PelletierJ PTransueSSnyderE L2006Pathogen inactivation techniquesBest Pract. Res. Clin. Haematol. 19 205242205-4210.1016/j.beha.2005.04.001RockG2011A comparison of methods of pathogen inactivation of FFPVox Sang. 100 16978169-7810.1111/j.1423-0410.2010.01374.xHorowitzBBonomoRPrinceA MChinS NBrotmanBShulmanR W1992Solvent/detergent-treated plasma: a virusinactivated substitute for fresh frozen plasmaBlood 79 82633826-33WilliamsonL MCardiganRProwseP V2003Methylene-blue-treated fresh frozen plasma: what is its contribution to blood safety?Transfusion 43 1322291322-2910.1046/j.1537-2995.2003.00483.xLarreaLCalabuigMRoldanVRiveraJTsaiH MVicenteVRoigR2009The influence of riboflavin photochemistry on plasma coagulation factorsTransfus. Apher. Sci. 41 199204199-20410.1016/j.transci.2009.09.006BihmD JEttingerABuytaert-HoefebK AHendrixB KMaldonado-CodinaGRockGGiclasPCGoodrichR P2010Characterization of plasma protein activity in riboflavin and UV light-treated fresh frozen plasma during two years of storage at ‑30°CVox Sang. 98 10815108-1510.1111/j.1423-0410.2009.01238.xSmithJRockG2010Protein quality in Mirasol pathogen reduction technology-treated, apheresis-derived fresh-frozen plasmaTransfusion 50 92631926-3110.1111/j.1537-2995.2009.02517.xWebertK ECsertiC MHannonJLinYPavenskiKPrendergastJ MBlajchmanM A2008Proceedings of a consensus conference: pathogen inactivation-making decisions about new technologiesTransfus. Med. Rev. 22 1341-3410.1016/j.tmrv.2007.09.001AuBuchonJ2011Update on the status of pathogen inactivation methods ISBT Sci. Series 6 1818181-8KnutsonF et al. 2015A prospective, active haemovigilance study with combined cohort analysis of 19,175 transfusions of platelet components prepared with amotosalen-UVA photochemical treatmentVox Sang. 109 34352343-5210.1111/vox.12287OsselaerJ et al. 2008An active haemovigilance programme characterizing the safety profile of 7437 platelet transfusions prepared with amotosalen photochemical treatmentVox Sang. 94 31523315-2310.1111/j.1423-0410.2007.01035.xTsenS WKingsley
Background The prenatal care visit structure has changed little over the past century despite the rapid evolution of technology including Internet and mobile phones. Little is known about how pregnant women engage with technologies and the interface between these tools and medical care, especially for women of lower socioeconomic status. Objective We sought to understand how women use technology during pregnancy through a qualitative study with women enrolled in the Women, Infants, and Children (WIC) program. Methods We recruited pregnant women ages 18 and older who owned a smartphone, at a WIC clinic in central Pennsylvania. The focus group guide included questions about women’s current pregnancy, their sources of information, and whether they used technology for pregnancy-related information. Sessions were audiotaped and transcribed. Three members of the research team independently analyzed each transcript, using a thematic analysis approach. Themes related to the topics discussed were identified, for which there was full agreement. Results Four focus groups were conducted with a total of 17 women. Three major themes emerged as follows. First, the prenatal visit structure is not patient-centered, with the first visit perceived as occurring too late and with too few visits early in pregnancy when women have the most questions for their prenatal care providers. Unfortunately, the educational materials women received during prenatal care were viewed as unhelpful. Second, women turn to technology (eg, Google, smartphone applications) to fill their knowledge gaps. Turning to technology was viewed to be a generational approach. Finally, women reported that technology, although frequently used, has limitations. Conclusions The results of this qualitative research suggest that the current prenatal care visit structure is not patient-centered in that it does not allow women to seek advice when they want it most. A generational shift seems to have occurred, resulting in pregnant women in our study turning to the Internet and smartphones to fill this gap, which requires significant skills to navigate for useful information. Future steps may include developing interventions to help health care providers assist patients early in pregnancy to seek the information they want and to become better consumers of Internet-based pregnancy resources. PMID:24892583
Open Source Software (OSS) is a major force in today's Information Technology (IT) landscape. Companies are increasingly using OSS in mission-critical applications. The transparency of the OSS technology itself with openly available source codes makes it ideal for students to participate in the OSS project development. OSS can provide unique…
Written in non-technical language, this sourcebook identifies plans and books for village and small community technology. It contains reviews of publications from 375 American and foreign sources on agriculture, alternative sources of energy, water supply, health care, housing, and related subjects. Emphasized are small-scale systems using local…
Sources The data sources listed are those sources that are currently being used for the Advanced Tactical Air Reconnaissance System ( ATARS ). This sensor...technology is about 10 years old (circa 1985). Current sensor technology is evolving towards farming type systems versus the ATARS pushbroom systems...Reconnaissance System ( ATARS ) or any Tactical Reconnaissance System (TRS). The emphasis of this analysis was to investigate the application of the Sony
Bigelow, Matthew S.; Roberts, Tony D.; McNeil, Shirley A.; Hawthorne, Todd; Battle, Phil
2015-09-01
We have designed and completed initial testing on a laser source suitable for atomic interferometry from compact, robust, integrated components. Our design is enabled by capitalizing on robust, well-commercialized, low-noise telecom components with high reliability and declining costs which will help to drive the widespread deployment of this system. The key innovation is the combination of current telecom-based fiber laser and modulator technology with periodicallypoled waveguide technology to produce tunable laser light at rubidium D1 and D2 wavelengths (and expandable to other alkalis) using second harmonic generation (SHG). Unlike direct-diode sources, this source is immune to feedback at the Rb line eliminating the need for bulky high-power isolators in the system. In addition, the source has GHz-level frequency agility and in our experiments was found to only be limited by the agility of our RF generator. As a proof-of principle, the source was scanned through the Doppler-broadened Rb D2 absorption line. With this technology, multiple channels can be independently tuned to produce the fields needed for addressing atomic states in atom interferometers and clocks. Thus, this technology could be useful in the development cold-atom inertial sensors and gyroscopes.
Two different scientific cultures go unreconciled in modern medicine. Each culture accepts that scientific knowledge and technologies are vulnerable to and easily invalidated by methods and conditions of acquisition, interpretation, and application. How these vulnerabilities are addressed separates the 2 cultures and potentially explains medicine's difficulties eradicating errors. A traditional culture, dominant in medicine, leaves error control in the hands of individual and group investigators and practitioners. A competing modern scientific culture accepts errors as inevitable, pernicious, and pervasive sources of adverse events throughout medical research and patient care too malignant for individuals or groups to control. Error risks to the validity of scientific knowledge and safety in patient care require systemwide programming able to support a culture in medicine grounded in tested, continually updated, widely promulgated, and uniformly implemented standards of practice for research and patient care. Experiences from successes in other sciences and industries strongly support the need for leadership from the Institute of Medicine's recommended Center for Patient Safely within the Federal Executive branch of government.
Social structures and processes are increasingly acknowledged and studied within the human factors/ergonomics (HFE) discipline. At the same time, social phenomena are rarely the focus of HFE work, leaving a knowledge gap. The present study directly addresses social and personal normative forces that influence technology use and performance. Social and personal normative influence to use electronic health records (EHR) were investigated using semi-structured qualitative interviews with 20 attending physicians at two US hospitals. Analyses used a comprehensive framework based on leading social scientific theories and revealed numerous sources of influence, including hospital administration, colleagues, patients, clinical and professional groups, government, and one’s self. Influence was achieved through different means and invoked different psychological processes. Findings motivate a new view of professionals’ technology use as a highly social process occurring in a social context, with implications for research, policy, design, and in general the development of a robust social ergonomics. PMID:23066349
During the biomass densification can be recognized various technological variables and also material parameters which significantly influences the final solid biofuels (pellets) quality. In this paper, we will present the research findings concerning relationships between technological and material variables during densification of sunflower hulls. Sunflower hulls as an unused source is a typical product of agricultural industry in Slovakia and belongs to the group of herbaceous biomass. The main goal of presented experimental research is to determine the impact of compression pressure, compression temperature and material particle size distribution on final biofuels quality. Experimental research described in this paper was realized by single-axis densification, which was represented by experimental pressing stand. The impact of mentioned investigated variables on the final briquettes density and briquettes dilatation was determined. Mutual interactions of these variables on final briquettes quality are showing the importance of mentioned variables during the densification process. Impact of raw material particle size distribution on final biofuels quality was also proven by experimental research on semi-production pelleting plant.
Social structures and processes are increasingly acknowledged and studied within the human factors/ergonomics (HFE) discipline. At the same time, social phenomena are rarely the focus of HFE work, leaving a knowledge gap. The present study directly addresses social and personal normative forces that influence technology use and performance. Social and personal normative influence to use electronic health records (EHR) were investigated using semi-structured qualitative interviews with 20 attending physicians at two US hospitals. Analyses used a comprehensive framework based on leading social scientific theories and revealed numerous sources of influence, including hospital administration, colleagues, patients, clinical and professional groups, government, and one's self. Influence was achieved through different means and invoked different psychological processes. Findings motivate a new view of professionals' technology use as a highly social process occurring in a social context, with implications for research, policy, design, and in general the development of a robust social ergonomics.
O'Doherty, Jim; Henricson, Joakim; Nilsson, Gert E.; Anderson, Chris; Leahy, Martin J.
2007-07-01
This article describes the theoretical development and design of a real-time microcirculation imaging system, an extension from a previously technology developed by our group. The technology utilises polarisation spectroscopy, a technique used in order to selectively gate photons returning from various compartments of human skin tissue, namely from the superficial layers of the epidermis, and the deeper backscattered light from the dermal matrix. A consumer-end digital camcorder captures colour data with three individual CCDs, and a custom designed light source consisting of a 24 LED ring light provides broadband illumination over the 400 nm - 700 nm wavelength region. Theory developed leads to an image processing algorithm, the output of which scales linearly with increasing red blood cell (RBC) concentration. Processed images are displayed online in real-time at a rate of 25 frames s -1, at a frame size of 256 x 256 pixels, and is limited only by computer RAM memory and processing speed. General demonstrations of the technique in vivo display several advantages over similar technology.
The goal of this report is to provide an overview of the state of the art of machine translation (MT) in Japan and to provide a comparison between Japanese and Western technology in this area. The term 'machine translation' as used here, includes both the science and technology required for automating the translation of text from one human language to another. Machine translation is viewed in Japan as an important strategic technology that is expected to play a key role in Japan's increasing participation in the world economy. MT is seen in Japan as important both for assimilating information into Japanese as well as for disseminating Japanese information throughout the world. Most of the MT systems now available in Japan are transfer-based systems. The majority of them exploit a case-frame representation of the source text as the basis of the transfer process. There is a gradual movement toward the use of deeper semantic representations, and some groups are beginning to look at interlingua-based systems.
This volume presents papers grouped under the topics on advances in streak and framing camera technology, applications of ultrahigh-speed photography, characterizing high-speed instrumentation, high-speed electronic imaging technology and applications, new technology for high-speed photography, high-speed imaging and photonics in detonics, and high-speed velocimetry. The papers presented include those on a subpicosecond X-ray streak camera, photocathodes for ultrasoft X-ray region, streak tube dynamic range, high-speed TV cameras for streak tube readout, femtosecond light-in-flight holography, and electrooptical systems characterization techniques. Attention is also given to high-speed electronic memory video recording techniques, high-speed IR imaging of repetitive events using a standard RS-170 imager, use of a CCD array as a medium-speed streak camera, the photography of shock waves in explosive crystals, a single-frame camera based on the type LD-S-10 intensifier tube, and jitter diagnosis for pico- and femtosecond sources.
The Nalco Fuel Tech with its seat at Naperville (near Chicago), Illinois, is an engineering company working in the field of technology and equipment for environmental protection. A major portion of NALCO products constitute chemical materials and additives used in environmental protection technologies (waste-water treatment plants, water treatment, fuel modifiers, etc.). Basing in part on the experience, laboratories and RD potential of the mother company, the Nalco Fuel Tech Company developed and implemented in the power industry a series of technologies aimed at the reduction of environment-polluting products of fuel combustion. The engineering solution of Nalco Fuel Tech belong tomore » a new generation of environmental protection techniques developed in the USA. They consist in actions focused on the sources of pollutants, i.e., in upgrading the combustion chambers of power engineering plants, e.g., boilers or communal and/or industrial waste combustion units. The Nalco Fuel Tech development and research group cooperates with leading US investigation and research institutes.« less
The paper discusses an EPA program to develop new technologies for controlling particulate matter from stationary sources, including both electrostatically augmented fabric filtration (ESFF) and electrostatic precipitators (ESPs). The first generation ESFF system, using an electr...
The technology assessment provides an introduction to the use of several alternative energy sources at wastewater treatment plants. The report contains fact sheets (technical descriptions) and data sheets (cost and design information) for the technologies. Cost figures and schema...
This article reviews current resources on computer-assisted instruction. Included are sources of software and hardware evaluations, advances in current technology, research, an information hotline, and inventories of available technological assistance. (DB)
Power requirements for the multipurpose space power platform, for space industrialization, SETI, the solar system exploration facility, and for global services are assessed for various launch dates. Priorities and initiatives for the development of elements of space power systems are described for systems using light power input (solar energy source) or thermal power input, (solar, chemical, nuclear, radioisotopes, reactors). Systems for power conversion, power processing, distribution and control are likewise examined.
Branquinho, Carmen Lucia; Colodete, Leandro Tavares
2004-08-01
INFOMAT is an electronic directory structured to facilitate the search and retrieval of materials science and technology information sources. Linked to the homepage of the International Materials Assessment and Application Centre, INFOMAT presents descriptions of 392 proprietary databases with links to their host systems as well as direct links to over 180 public domain databases and over 2,400 web sites. Among the web sites are associations/unions, governmental and non-governmental institutions, industries, library holdings, market statistics, news services, on-line publications, standardization and intellectual property organizations, and universities/research groups.
The conference brought together professionals from the process- engineered-fuels (PEF), utility, paper, plastics, and boiler industries. Although the last two decades have produced technical breakthroughs, efforts to advance PEF must now focus on increasing commercial breakthroughs. Successful commercialization will depend on increasing supplier, consumer, and regulator confidence and support by demonstrating the performance and value of PEF products. Speakers provided updates on how PEF technology is evolving with respect to technical, economic, and regulatory challenges. Actions critical toward full commercialization of PEF were then considered. Discussion groups addressed materials sourcing, fuel processing and transportation, combustion, and ash handling.
Using an environmental technology assessment system, we put forward the evaluation index system for treatment technology of the typical odor pollution sources in the petroleum refining process, which has been applied in the assessment of the industrial technology. And then the best available techniques are selected for emissions of gas refinery sewage treatment plant, headspace gas of acidic water jars, headspace gas of cold coke jugs/intermediate oil tank/dirty oil tank, exhaust of oxidative sweetening, and vapors of loading and unloading oil.
Semenza, J C; Roberts, L; Henderson, A; Bogan, J; Rubin, C H
1998-12-01
Deteriorating water treatment facilities and distribution systems pose a significant public health threat, particularly in republics of the former Soviet Union. Interventions to decrease the disease burden associated with these water systems range from upgrading distribution networks to installing reverse osmosis technology. To provide insight into this decision process, we conducted a randomized intervention study to provide epidemiologic data for water policy decisions in Nukus, Uzbekistan, where drinking water quality is suboptimal. We interviewed residents of 240 households, 120 with and 120 without access to municipal piped water. Residents of 62 households without piped water were trained to chlorinate their drinking water at home in a narrow-necked water container with a spout. All study subjects (1583 individuals) were monitored biweekly for self-reported diarrheal illness over a period of 9.5 weeks. The home chlorination intervention group had the lowest diarrheal rate (28.8/1,000 subjects/month) despite lack of access to piped water in their homes. Compared with the two groups that did not receive the intervention this rate was one-sixth that of the group with no piped water (179.2/1,000 subjects/month) and one-third that of the households with piped water (75.5/1,000 subjects/month). More than 30% of the households with piped water lacked detectable levels of chlorine residues in their drinking water, despite two-stage chlorination of the source water, and were at increased risk of diarrhea. Forty-two percent of these municipal users reported that water pressure had been intermittent within the previous two days. The dramatic reduction in diarrheal rates in the home-chlorination intervention group indicates that a large proportion of diarrheal diseases in Nukus are water-borne. The home-chlorination group had less diarrhea than the group with piped water, implicating the distribution system as a source of disease transmission. Taken together, these epidemiologic data would support the hypothesis that diarrhea in the piped water group could be attributed to cross-contamination between the municipal water supply and sewer, due to leaky pipes and lack of water pressure. Relatively inexpensive steps, including chlorination, maintaining water pressure, and properly maintaining the distribution system, rather than reverse osmosis technology, should reduce diarrheal rates.
Manzo, Michelle A.; Brewer, Jeffrey C.; Bugga, Ratnakumar V.; Darcy, Eric C.; Jeevarajan, Judith A.; McKissock, Barbara I.; Schmitz, Paul C.
2010-01-01
This NASA Aerospace Flight Battery Systems Working Group was chartered within the NASA Engineering and Safety Center (NESC). The Battery Working Group was tasked to complete tasks and to propose proactive work to address battery related, agency-wide issues on an annual basis. In its first year of operation, this proactive program addressed various aspects of the validation and verification of aerospace battery systems for NASA missions. Studies were performed, issues were discussed and in many cases, test programs were executed to generate recommendations and guidelines to reduce risk associated with various aspects of implementing battery technology in the aerospace industry. This document contains Part 1 - Volume I: Generic Safety, Handling and Qualification Guidelines for Lithium-Ion (Li-Ion) Batteries, Availability of Source Materials for Lithium-Ion (Li-Ion) Batteries, and Maintaining Technical Communications Related to Aerospace Batteries (NASA Aerospace Battery Workshop).
Peiró, Laura Talens; Méndez, Gara Villalba; Ayres, Robert U
2013-03-19
A number of metals that are now important to the electronic industry (and others) will become much more important in the future if current trends in technology continue. Most of these metals are byproducts (or hitch-hikers) of a small number of important industrial metals (attractors). By definition, the metals in the hitch-hiker group are not mined by themselves, and thus their production is limited by the demand for the major attractors. This article presents a material flow analysis (MFA) of the complex inter-relationships between these groups of metals. First, it surveys the main sources of geologically scarce (byproduct) metals currently considered critical by one or other of several recent studies. This is followed by a detailed survey of their major functions and the quantities contained in intermediate and end-products. The purpose is to identify the sectors and products where those metals are used and stocked and thus potentially available for future recycling. It concludes with a discussion of the limitations of possible substitution and barriers to recycling.
We have been developing a laser produced plasma extremely ultra violet (LPP-EUV) light source for a high volume manufacturing (HVM) semiconductor lithography. It has several unique technologies such as the high power short pulse carbon dioxide (CO2) laser, the short wavelength solid-state pre-pulse laser and the debris mitigation technology with the magnetic field. This paper presents the key technologies for a high power LPP-EUV light source. We also show the latest performance data which is 188W EUV power at intermediate focus (IF) point with 3.7% conversion efficiency (CE) at 100 kHz.
Patent literature is an important source of chemical information that is often neglected by chemical educators. This paper describes an effort to teach chemistry students how to use patent databases to search for information on applied chemical technology related to the manufacture of industrial and specialty chemicals. Students in a second-year-level organic chemistry class were shown how to search patent literature as part of a group research paper assignment that involved determining the feasibility of starting an industrial chemical operation to manufacture a given industrial chemical. Students who were assigned high value or specialty chemicals were most likely to cite patent literature in their final papers. Students who were assigned plastics or bulk commodity chemicals were less likely to cite patents. It is suggested that students made choices about the usefulness of patent literature and that patents were most useful when current patents existed and provided the patent owner a competitive advantage. For plastics or commodity chemicals, manufacturing technologies tend to be mature and are well described by more accessible information sources. Suggestions are made for effective introduction of patent literature instruction into upper-level chemistry courses.
... Management, Inc., Corporate Service Group, Information Technology (IT) Division, Including On-Site Leased... Information Management, Inc., Corporate Service Group, Information Technology (IT) Division, including on-site... location of Iron Mountain Information Management, Inc., Corporate Service Group, Information Technology (IT...
In this paper, the energy efficiency of a contemporary Smart Grid that is based on Distributed Renewable Energy Sources (DRES) is examined under the scope of the communication systems utilized between the energy loads and the energy sources. What is evident is that the Internet of Things (IoT) technologies that are based on the existing Web infrastructure can be heavily introduced in this direction especially when combined with long range low bandwidth networking technologies, power line communication technologies and optimization methodologies for renewable energy generation. The renewable energy generation optimization will be based on devices embedded in the PV panels and the wind power generators, which will rely on bidirectional communications with local gateways and remote control stations for achieving energy efficiency. Smart meters and DRES combined with IoT communications will be the enabling technologies for the ultimate fusion of Internet technology and renewable energy generation realizing the Energy Internet.
offer an apparent understanding of the capabilities of the emerging Photovoltaic Power Converter (PVPC) technology used in panels for electricity... powering method that uses fueled generators and the alternative option is photovoltaic panels with the Atira technology embedded. This analysis is... POWER SOURCE FOR THE GREEK ISLANDS ABSTRACT The use of Alternative Renewable Energy Sources is becoming an increasing possibility to
Thorn, Karen E; Bangalore, Anantha K; Browne, Allen C
2007-10-11
The UMLS Knowledge Source Server (UMLSKS), developed at the National Library of Medicine (NLM), makes the knowledge sources of the Unified Medical Language System (UMLS) available to the research community over the Internet. In 2003, the UMLSKS was redesigned utilizing state-of-the-art technologies available at that time. That design offered a significant improvement over the prior version but presented a set of technology-dependent issues that limited its functionality and usability. Four areas of desired improvement were identified: software interfaces, web interface content, system maintenance/deployment, and user authentication. By employing next generation web technologies, newer authentication paradigms and further refinements in modular design methods, these areas could be addressed and corrected to meet the ever increasing needs of UMLSKS developers. In this paper we detail the issues present with the existing system and describe the new system's design using new technologies considered entrants in the Web 2.0 development era.
. Spatial information intelligence is a global issue that will increasingly affect our ability to survive as a species. Collectively we must better appreciate the complex relationships that make life on Earth possible. Providing spatial information in its native context can accelerate our ability to process that information. To maximize this ability to process information, three basic elements are required: data delivery (server technology), data access (client technology), and data processing (information intelligence). NASA World Wind provides open source client and server technologies based on open standards. The possibilities for data processing and data sharing are enhanced by this inclusive infrastructure for geographic information. It is interesting that this open source and open standards approach, unfettered by proprietary constraints, simultaneously provides for entirely proprietary use of this same technology. 1. WHY WORLD WIND? NASA World Wind began as a single program with specific functionality, to deliver NASA content. But as the possibilities for virtual globe technology became more apparent, we found that while enabling a new class of information technology, we were also getting in the way. Researchers, developers and even users expressed their desire for World Wind functionality in ways that would service their specific needs. They want it in their web pages. They want to add their own features. They want to manage their own data. They told us that only with this kind of flexibility, could their objectives and the potential for this technology be truly realized. World Wind client technology is a set of development tools, a software development kit (SDK) that allows a software engineer to create applications requiring geographic visualization technology. 2. MODULAR COMPONENTRY Accelerated evolution of a technology requires that the essential elements of that technology be modular components such that each can advance independent of the other elements. World Wind therefore changed its mission from providing a single information browser to enabling a whole class of 3D geographic applications. Instead of creating a single program, World Wind is a suite of components that can be selectively used in any number of programs. World Wind technology can be a part of any application, or it can be a window in a web page. Or it can be extended with additional functionalities by application and web developers. World Wind makes it possible to include virtual globe visualization and server technology in support of any objective. The world community can continually benefit from advances made in the technology by NASA in concert with the world community. 3. OPEN SOURCE AND OPEN STANDARDS NASA World Wind is NASA Open Source software. This means that the source code is fully accessible for anyone to freely use, even in association with proprietary technology. Imagery and other data provided by the World Wind servers reside in the public domain, including the data server technology itself. This allows others to deliver their own geospatial data and to provide custom solutions based on users specific needs.
... Section 63.16 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... the emission standard to which the affected source is subject is based on add-on control technology, and the affected source complies by using add-on control technology, then all required reporting...
Stanford University Medical Media and Information Technologies's technical workshop "Prototyping of Surgical Simulators using Open Source Simulation Software" was held in August 2006 at Stanford University. The objectives, program, and topics covered are presented in this short report.
EPA is taking final action to revise the February 26, 2007 mobile source air toxics rule’s requirements that specify which benzene control technologies a refiner may utilize to qualify to generate early benzene credits.
Rossetti, M.; Napierala, J.; Matuschek, N.; Achatz, U.; Duelk, M.; Vélez, C.; Castiglia, A.; Grandjean, N.; Dorsaz, J.; Feltin, E.
2012-03-01
Since pico-projectors were starting to become the next electronic "must-have" gadget, the experts were discussing which light-source technology seems to be the best for the existing three major projection approaches for the optical scanning module such as digital light processing, liquid crystal on silica and laser beam steering. Both so-far used light source technologies have distinct advantages and disadvantages. Though laser-based pico-projectors are focus-free and deliver a wider color gamut, their major disadvantages are speckle noise, cost and safety issues. In contrast, projectors based on cheaper Light Emitting Diodes (LEDs) as light source are criticized for a lack of brightness and for having limited focus. Superluminescent Light Emitting Diodes (SLEDs) are temporally incoherent and spatially coherent light sources merging in one technology the advantages of both Laser Diodes (LDs) and LEDs. With almost no visible speckle noise, focus-free operation and potentially the same color gamut than LDs, SLEDs could potentially answer the question which light source to use in future projector applications. In this quest for the best light source, we realized visible SLEDs emitting both in the red and blue spectral region. While the technology required for the realization of red emitters is already well established, III-nitride compounds required for blue emission have experienced a major development only in relatively recent times and the technology is still under development. The present paper is a review of the status of development reached for the blue superluminescent diodes based on the GaN material system.
Rigby, M; Ammenwerth, E; Talmon, J; Nykänen, P; Brender, J; de Keizer, N
2011-01-01
Health informatics is generally less committed to a scientific evidence-based approach than any other area of health science, which is an unsound position. Introducing the new Web 3.0 paradigms into health IT applications can unleash a further great potential, able to integrate and distribute data from multiple sources. The counter side is that it makes the user and the patient evermore dependent on the 'black box' of the system, and the re-use of the data remote from the author and initial context. Thus anticipatory consideration of uses, and proactive analysis of evidence of effects, are imperative, as only when a clinical technology can be proven to be trustworthy and safe should it be implemented widely - as is the case with other health technologies. To argue for promoting evidence-based health informatics as systems become more powerful and pro-active yet more dispersed and remote; and evaluation as the means of generating the necessary scientific evidence base. To present ongoing IMIA and EFMI initiatives in this field. Critical overview of recent developments in health informatics evaluation, alongside the precedents of other health technologies, summarising current initiatives and the new challenges presented by Health Informatics 3.0. Web 3.0 should be taken as an opportunity to move health informatics from being largely unaccountable to one of being an ethical and responsible science-based domain. Recent and planned activities of the EFMI and IMIA working groups have significantly progressed key initiatives. Concurrent with the emergence of Web 3.0 as a means of new-generation diffuse health information systems comes an increasing need for an evidence-based culture in health informatics.
...; Power Technologies Group Division; Including On-Site Leased Workers From Manpower Milwaukee, WI; Notice... former workers of Dana Holding Company, Power Technologies Group Division, Milwaukee, Wisconsin (subject... reconsideration investigation, I determine that workers of Dana Holding Company, Power Technologies Group Division...
Boulos, Maged N Kamel; Warren, Jeffrey; Gong, Jianya; Yue, Peng
2010-03-03
HTML5 is being developed as the next major revision of HTML (Hypertext Markup Language), the core markup language of the World Wide Web. It aims at reducing the need for proprietary, plug-in-based rich Internet application (RIA) technologies such as Adobe Flash. The canvas element is part of HTML5 and is used to draw graphics using scripting (e.g., JavaScript). This paper introduces Cartagen, an open-source, vector-based, client-side framework for rendering plug-in-free, offline-capable, interactive maps in native HTML5 on a wide range of Web browsers and mobile phones. Cartagen was developed at MIT Media Lab's Design Ecology group. Potential applications of the technology as an enabler for participatory online mapping include mapping real-time air pollution, citizen reporting, and disaster response, among many other possibilities.
Technological innovations are rising rapidly and are inevitably becoming part of the health care environment. Patients frequently access Social media as a forum for discussion of personal health issues; and healthcare providers are now considering ways of harnessing social media as a source of learning and teaching. This review highlights some of the complex issues of using social media as an opportunity for interaction between public- patient-healthcare staff; considers the impact of self- education and self-management for patients with diabetes, and explores some recent advances in delivering education for staff. When using any information technology, the emphasis should rely on being assessed rigorously to show it promotes health education safely, can be recognized as delivering up-to- date health information effectively, and should ensure there is no bias in selective communication, or disadvantage to isolated patient groups.
The NASA Goddard Heliophysics Science Division (HSD) EPO and mission websites are rich with content covering the broad subject of heliophysics. This includes detailed information for many age groups, a large range of descriptive imagery and dynamic video and interactive material. The weakness of all this content is that it is scattered over so many websites as opposed to being organized and focused in one user friendly location. The website heliospotlight.org is being developed to address all these concerns, leveraging the vast content already developed while using state-of-the-art web technologies. This will provide a rich user experience simultaneously tailoring to the needs of the broad audience of students, educators, scientists, journalists and the general public. The website will use well supported, open source technologies enabling future flexibility and expansion. HSD EPO will support the development of this information resource.
Most recently, there has been a noticeable rise in the push for use of technology in the classroom. The advancement in digital science has increased greatly the capacity to explore animations, models, and interesting apps. that should substantially enhance science cognition. At the same time, there is a great need to increase collaboration in the science classroom. There is a concern that the collaborative experience will be lost with the use of technology in the classroom. This study seeks to explore the use of iPads in conjunction with a constructivist learning approach to promote student collaboration. The participants in this study included two sections of 11 th grade AP Chemistry students. Data was generated from different sources such as teacher observations of classroom interactions patterned after Gilles (2004). In order to gauge student perception of working in groups with the use of the iPad, survey questions adapted from Knezek, Mills and Wakefield (2012) and group interviews were used (Galleta, 2013). Learning outcomes were assessed using methods adapted from a study by Lord and Baviskar (2007). Findings of this study showed high percentages of evidence for increased community, productive student group communication, effective feedback through use of the iPads, and value of the interactive apps., but it also showed that students still preferred face-to-face interactions over virtual interactions for certain learning situations. The study showed good content learning outcomes, as well as favorable opinions among the students for the effectiveness of the use of iPads in collaborative settings in the classroom.
Recent advances in electronics and computer technology have made great strides in the field of remote sensing and biomonitoring. The quality of drinking water sources has come under closer scrutiny in recent years. Issues ranging from ecological to public health and national se...
This report presents results of the Mine Waste Technology Program Activity III, Project 8, Underground Mine Source Control Demonstration Project implemented and funded by the U. S. Environmental Protection Agency (EPA) and jointly administered by EPA and the U. S. Department of E...
The report reviews the commercially available and developing technologies for the application of remote sensing to the measurement of source emissions. The term 'remote sensing technology', as applied in the report, means the detection or concentration measurement of trace atmosp...
This document is a copy of the Federal Register publication of the February 14, 1985 Final Rule for the Amendment and Innovative Technology Waiver for New Source Performance Standards for Kraft Pulp Mills.
Section 172(b)(2) of the Clean Air Act as amended August 1977, requires that SIP revisions 'provide for the implementation of all reasonably available control measures as expeditiously as practicable.' The use of RACT for stationary sources is defined as the lowest emission limit that a particular source is capable of meeting by the application of control technology that is reasonably available considering technological and economic feasibility. The purpose of this report has been to identify control techniques that best represent RACT for particular emission sources in TSP nonattainment areas in the State of Florida. These sources include phosphate process operations;more » portland cement plants; electric arc furnaces; sweat or pot furnaces; materials handling, sizing, screening, crushing, and grinding operations.« less
In general, NOx control technologies are categorized as being either primary control technologies or secondary control technologies. Primary control technologies reduce the formation of NOx in the primary combustion zone. In contrast, secondary control technologies destroy the NO...
Coley, Michael D.; Warner, Wendy J.; Stair, Kristin S.; Flowers, James L.; Croom, D. Barry
2015-01-01
This study examined the accessibility and use of instructional technologies by agriculture teachers in Tennessee. Data were collected using a survey instrument to investigate teachers' adoption of technology, sources of acquired technology skills, accessibility and use of technological equipment, and barriers to technology integration. The study…
EPA has created the Environmental Technology Verification program to provide high quality, peer reviewed data on technology performance. This data is expected to accelerate the acceptance and use of improved environmental protection technologies. The Greenhouse Gas Technology C...
Small-scale and high-resolution marine sparker multi-channel seismic surveys using large energy sparkers are characterized by a high dominant frequency of the seismic source, wide bandwidth, and a high resolution. The technology with a high-resolution and high-detection precision was designed to improve the imaging quality of shallow sedimentary. In the study, a 20KJ sparker and 24-channel streamer cable with a 6.25m group interval were used as a seismic source and receiver system, respectively. Key factors for seismic imaging of gas hydrate are enhancement of S/N ratio, amplitude compensation and detailed velocity analysis. However, the data in this study has some characteristics below: 1. Small maximum offsets are adverse to velocity analysis and multiple attenuation. 2. Lack of low frequency information, that is, information less than 100Hz are invisible. 3. Low S/N ratio since less coverage times (only 12 times). These characteristics make it difficult to reach the targets of seismic imaging. In the study, the target processing methods are used to improve the seismic imaging quality of gas hydrate. First, some technologies of noise suppression are combined used in pre-stack seismic data to suppression of seismic noise and improve the S/N ratio. These technologies including a spectrum sharing noise elimination method, median filtering and exogenous interference suppression method. Second, the combined method of three technologies including SRME, τ-p deconvolution and high precision Radon transformation is used to remove multiples. Third, accurate velocity field are used in amplitude energy compensation to highlight the Bottom Simulating Reflector (short for BSR, the indicator of gas hydrates) and gas migration pathways (such as gas chimneys, hot spots et al.). Fourth, fine velocity analysis technology are used to improve accuracy of velocity analysis. Fifth, pre-stack deconvolution processing technology is used to compensate for low frequency energy and suppress of ghost, thus formation reflection characteristics are highlighted. The result shows that the small-scale and high resolution marine sparker multi-channel seismic surveys are very effective in improving the resolution and quality of gas hydrate imaging than the conventional seismic acquisition technology.
Cotter, Gladys A.; Hunter, Judy F.; Ostergaard, K.
1993-01-01
The NASA Scientific and Technical Information Program utilizes a technology infrastructure assembled in the mid 1960s to late 1970s to process and disseminate its information products. When this infrastructure was developed it placed NASA as a leader in processing STI. The retrieval engine for the STI database was the first of its kind and was used as the basis for developing commercial, other U.S., and foreign government agency retrieval systems. Due to the combination of changes in user requirements and the tremendous increase in technological capabilities readily available in the marketplace, this infrastructure is no longer the most cost-effective or efficient methodology available. Consequently, the NASA STI Program is pursuing a modernization effort that applies new technology to current processes to provide near-term benefits to the user. In conjunction with this activity, we are developing a long-term modernization strategy designed to transition the Program to a multimedia, global 'library without walls.' Critical pieces of the long-term strategy include streamlining access to sources of STI by using advances in computer networking and graphical user interfaces; creating and disseminating technical information in various electronic media including optical disks, video, and full text; and establishing a Technology Focus Group to maintain a current awareness of emerging technology and to plan for the future.
Technology is the sum of the ways in which social groups manipulate order in the world to achieve their ends. It enables our active engagement with the world. Technology is central to our present well-being and vital for our future survival. As such it needs a coherent world view, a conceptual framework which will enable the fundamental problems that it poses for society to be approached in an illuminating way. Furthermore, such an approach, while remaining convincing, must not be overwhelmed by an ever-increasing welter of specialization and diversity of application. It is the purpose of the set of papers presented here to examine some key aspects of such a conceptual framework; not in the sense of offering a fully worked out philosophy of technology--that would be a huge and complex undertaking--but rather by considering some key topics. Subsidiary aims are to survey important relevant areas, to identify key sources that can provide access points for further study, and to consider some possible future developments. Major, coherent domains of activity are characterized by a few, fundamental, extensively used and essentially unifying concepts. Technology is such a domain, and its fundamental concepts are information, knowledge and agency. The following sections give a synoptic overview of the material presented in this theme issue, and set it within a wider context.
Several studies from the 1990s show that information and communication technology (ICT) can be important for people with intellectual disabilities, although later results have queried what importance technology can have in increasing the influence and participation of this group. This article presents the results from a study of people with moderate and mild intellectual disabilities and their view of issues related to empowerment and ICT. Data were collected through a study of original sources, participation observation, a group interview and four in-depth interviews with people with mild intellectual disabilities. Results show that respondents feel that it is important to be able have an influence on issues concerning work, housing, leisure time and social relationships. The way one views one's own ability to influence and control situations depends on individual self-esteem, social networks, previous experience and knowledge; the participants' coping skills also depend on these factors to a great extent. The ten participants who were interviewed had experience with ICT and felt that it was useful and enjoyable in a variety of ways concerning their studies, work and, for some, even their leisure time. Computers were used to gather information, to communicate with the surrounding world, to shop, for creative activities and for games. The respondents used media, such as television, radio, music systems and daily papers, for recreation and to gain information and knowledge.
This page contains 3 September 2015 fact sheets with information regarding the final residual risk and technology review for the petroleum refinery source categories. The fact sheets provide an overview, a summary of changes, effects for the community.
Many emerging remediation technologies are designed to remove contaminant mass from source zones at DNAPL sites in response to regulatory requirements. There is often concern in the regulated community as to whether mass removal actually reduces risk, or whether the small risk reductions achieved warrant the large costs incurred. This paper sets out a framework for quantifying the degree to which risk is reduced as mass is removed from shallow, saturated, low-permeability, dual-porosity, DNAPL source zones. Risk is defined in terms of meeting an alternate concentration level (ACL) at a compliance well in an aquifer underlying the source zone. Themore » ACL is back-calculated from a carcinogenic health-risk characterization at a downstream water-supply well. Source-zone mass-removal efficiencies are heavily dependent on the distribution of mass between media (fractures, matrix) and phases (dissolved, sorbed, free product). Due to the uncertainties in currently-available technology performance data, the scope of the paper is limited to developing a framework for generic technologies rather than making risk-reduction calculations for specific technologies. Despite the qualitative nature of the exercise, results imply that very high mass-removal efficiencies are required to achieve significant long-term risk reduction with technology, applications of finite duration. 17 refs., 7 figs., 6 tabs.« less
... produces both electric (or mechanical) and useful thermal energy from the same primary energy source. Coke.... Conventional technology means wet flue gas desulfurization (FGD) technology, dry FGD technology, atmospheric fluidized bed combustion technology, and oil hydrodesulfurization technology. Distillate oil means fuel oils...
With the advance of post-genomic technologies, the need for tools to manage large scale data in biology becomes more pressing. This involves annotating and storing data securely, as well as granting permissions flexibly with several technologies (all array types, flow cytometry, proteomics) for collaborative work and data sharing. This task is not easily achieved with most systems available today. We developed Djeen (Database for Joomla!'s Extensible Engine), a new Research Information Management System (RIMS) for collaborative projects. Djeen is a user-friendly application, designed to streamline data storage and annotation collaboratively. Its database model, kept simple, is compliant with most technologies and allows storing and managing of heterogeneous data with the same system. Advanced permissions are managed through different roles. Templates allow Minimum Information (MI) compliance. Djeen allows managing project associated with heterogeneous data types while enforcing annotation integrity and minimum information. Projects are managed within a hierarchy and user permissions are finely-grained for each project, user and group.Djeen Component source code (version 1.5.1) and installation documentation are available under CeCILL license from http://sourceforge.net/projects/djeen/files and supplementary material.
Although new jet transport airplanes in today s fleet are considerably quieter than the first jet transports introduced about 40 years ago, airport community noise continues to be an important environmental issue. NASA s Advanced Subsonic Transport (AST) Noise Reduction program was begun in 1994 as a seven-year effort to develop technology to reduce jet transport noise 10 dB relative to 1992 technology. This program provides for reductions in engine source noise, improvements in nacelle acoustic treatments, reductions in the noise generated by the airframe, and improvements in the way airplanes are operated in the airport environs. These noise reduction efforts will terminate at the end of 2001 and it appears that the objective will be met. However, because of an anticipated 3-8% growth in passenger and cargo operations well into the 21st Century and the slow introduction of new the noise reduction technology into the fleet, world aircraft noise impact will remain essentially constant until about 2020 to 2030 and thereafter begin to rise. Therefore NASA has begun planning with the Federal Aviation Administration, industry, universities and environmental interest groups in the USA for a new noise reduction initiative to provide technology for significant further reductions.
Background With the advance of post-genomic technologies, the need for tools to manage large scale data in biology becomes more pressing. This involves annotating and storing data securely, as well as granting permissions flexibly with several technologies (all array types, flow cytometry, proteomics) for collaborative work and data sharing. This task is not easily achieved with most systems available today. Findings We developed Djeen (Database for Joomla!’s Extensible Engine), a new Research Information Management System (RIMS) for collaborative projects. Djeen is a user-friendly application, designed to streamline data storage and annotation collaboratively. Its database model, kept simple, is compliant with most technologies and allows storing and managing of heterogeneous data with the same system. Advanced permissions are managed through different roles. Templates allow Minimum Information (MI) compliance. Conclusion Djeen allows managing project associated with heterogeneous data types while enforcing annotation integrity and minimum information. Projects are managed within a hierarchy and user permissions are finely-grained for each project, user and group. Djeen Component source code (version 1.5.1) and installation documentation are available under CeCILL license from http://sourceforge.net/projects/djeen/files and supplementary material. PMID:23742665
The effective care and support of community healthcare nurses (CHNs) contribute greatly to the healthy aging of older adults living at home. Integrating innovative technologies into CHNs' daily practice offers new opportunities and perspectives for early detection of health issues and interventions among home-dwelling older adults. To explore the perception of acceptability among CHNs of an intelligent wireless sensor system (IWSS) for use in daily practice for the detection of health issues in home-dwelling older adults receiving home healthcare. Descriptive and qualitative data were sourced from a pilot randomized controlled trial involving 17 CHNs using an IWSS in their daily practice to rapidly detect falls and other health issues in patients' homes. IWSS alerts indicating behavior changes were sent to CHNs. Their perceived usefulness (PU) and perceived ease of use (PEOU) were assessed. The acceptability of IWSS technology was explored using a questionnaire and focus group discussions. The PU and PEOU of the IWSS technology were low to moderate. A majority of the CHNs were dissatisfied with its performance and intrusiveness; they reported multiple obstacles in the usefulness and ease of use of the IWSS technology in daily practice. To improve the IWSS technology's low to moderate acceptability among CHNs, we recommend a more user-centered implementation strategy and an embedded model of nursing care.
Today's material welfare has been achieved at the expense of consumption of finite resources and generation of environmental burdens. Over the past few decades the volume of global consumption has grown dramatically, while at the same time technological advances have enabled products with greater efficiencies. These two directions of change, consumption growth and technological advance, are the foci of the present paper. Using quantitative measures for these two factors, we define a new indicator, "eco-velocity of consumption", analogous to velocity in physics. The indicator not only identifies the environmental soundness of consumption growth and technological advance but also indicates whether and to what extent our society is shifting toward sustainable consumption. This study demonstrates the practicability of the indicator through a case study in which we calculate the eco-velocities of Japanese household consumption in 2 years: 1995 and 2000. The rate of technological advance during the periods concerned is quantified in terms of the embodied carbon dioxide emission per yen of product. The results show that the current growth rate of Japanese household consumption is greater than the rate of technological advance to mitigate carbon dioxide emissions. The eco-velocities at the level of individual commodity groups are also examined, and the sources of changes in eco-velocity for each commodity are identified using structural decomposition analysis.
In 2015, Sandia National Laboratories conducted an active-source seismic survey of Yucca Flat (YF), Nevada, on the Nevada National Security Site. YF hosted over 650 underground nuclear tests (UGTs) between 1957 and 1992. Data from this survey will help characterize the geologic structure and bulk properties of the region, informing models for the next phase of the Source Physics Experiments. The survey source was a 13,000-kg weight drop at 91 locations along a 19-km N-S transect and 56 locations along an 11-km E-W transect. Over 350 three-component 2-Hz geophones were variably spaced at 10, 20, and 100 m along each line; we used a roll-along survey geometry to ensure 10-m receiver spacing within 2 km of the source. We applied the multiple filter technique to the dataset using a comb of 30 narrow bandpass filters with center frequencies ranging from 1 to 50 Hz. After manually windowing out the fundamental Rayleigh-wave arrival, we picked group-velocity dispersion curves for 50,000 source-receiver pairs. We performed a joint inversion of group-velocity dispersion and existing body-wave travel-time picks for the shear- and compressional-wave velocity structure of YF. Our final models reveal significant Vp / Vs anomalies in the vicinities of legacy UGT sites. The velocity structures corroborate existing seismo-stratigraphic models of YF derived from borehole and gravity data. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia LLC, a wholly owned subsidiary of Honeywell International Inc. for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525.
Previous studies of Citrus spp. peel have shown hypoglycemic and antioxidant activities. Citrus limetta has been studied for its therapeutic properties. Diabetes mellitus (DM) is a health problem in Mexico and worldwide, that takes a vital importance due to its high incidence. Recently, scientists have searched natural sources to control the disease. In this study, we evaluated the in vitro hypoglycemic activity and in vivo postprandial glycemic effect of C. limetta peel flour by glucose adsorption and retardation assays as well as postprandial serum glucose levels using a group of female Balb-c mice, respectively. C. limetta peel flour showed a glucose adsorption capacity of 16.58 mM, having a similar effect regarding the positive control. The glucose diffusion in the dialysate was elevated, with a glucose dialysis retardation index of 33.79% in a period of 3 h, showing similar results to positive control. Postprandial serum glucose levels in the animal group treated with C. limetta peel flour showed a glucose level of 41.4 mg/dL, being this value significantly lower than negative control group and similar to positive control. Toxicity tests showed good tolerance to the dose of 2000 mg/kg. C. limetta peel flour could act as a source of functional compounds for the control of DM. Citrus limetta peel flour showed a glucose adsorption capacity similar to the positive controlThe glucose diffusion in the dialysate was elevated, showing similar results to positive controlPostprandial serum glucose levels in the animal group treated with C. limetta peel flour showed a glucose level significantly lower than negative control group and similar to positive controlToxicity tests showed good tolerance C. limetta peel flour could act as a source of functional compounds for the control of diabetes mellitus. Abbreviations used: CIATEJ: Center for Research and Assistance in Technology and Design of Jalisco; DM: Diabetes mellitus; FGC: Final glucose concentration; GDRI: Glucose dialysis retardation index; IGC: Initial glucose concentration; OECD: Organization for Economic Cooperation and Development.
Wang, Xing; Sun, Wenliang; Guo, Min; Li, Minjiao; Li, Wan
2018-01-01
The research object of this paper is fine particles in typical region. The construction of component spectrum bank is based on the technology of online source apportionment, then the result of the apportionment is utilized to verify the effectiveness of fine particles component spectrum bank and which also act as the matching basis of online source apportionment receptor sample. On the next, the particle source of air pollution is carried through the matching diagnosis empirical research by utilizing online source apportionment technology, to provide technical support for the cause analysis and treatment of heavy pollution weather.
High-grade platinum-group metal concentrations have been identified in an abundant class of near-Earth asteroids known as LL Chondrites. The potential existence of a high-value asteroid-derived mineral product is examined from an economic perspective to assess the possible impacts on long-term precious metal supply. It is hypothesized that extraterrestrial sources of platinum group metals will become available in the global marketplace in a 20-year time frame, based on current trends of growth in technology and increasing levels of human activities in near-Earth space. Current and projected trends in platinum supply and demand are cited from the relevant literature to provide an economic context and provide an example for evaluating the economic potential of future asteroid-derived precious and strategic metals.
Marine and Hydrokinetic Energy Metocean Data-use, Sources, and Instrumentation presentation from Water Power Technologies Office Peer Review, FY14-FY16. This project aims to accelerate deployment of marine and hydrokinetic (MHK) technology by establishing: 1) relevant existing and evolving standards and guidelines, 2) meteorological and oceanic (metocean) data use 3) data sources, and 4) instrumentation guidance for siting, design, and operation of MHK devices along the U.S coastline.
Sources and Applications IITRI, Chicago, 111., 21-22 October 1964, ORNL -11C5, UC-23-Isotopes-Industrial Technology, November 1965 This...Applications IITRI, Chicago, IU., 21-22 October 1964. ORNL -11C5, UC-23lsotopes-lndustria3 Technology November 1965 The design of radioactive sources...Mich. Proceedings of Symposium on Low-Energy X and Gamma Sources and Applications IITRI, Chicago, HI., 21-22 October 1964. ORNL -11C5, US-23-Isotopes
One presumption of scientific microgravity research is that while in space disturbances are minimized and experiments can be conducted in the absence of gravity. The problem with this assumption is that numerous disturbances actually occur in the space environment. Scientists must consider all disturbances when planning microgravity experiments. Although small disturbances, such as a human sneeze, do not cause most researchers on earth much concern, in space, these minuscule disturbances can be detrimental to the success or failure of an experiment. Therefore, a need exists to isolate experiments and provide a quiescent microgravity environment. The objective of microgravity isolation is to quantify all possible disturbances or vibrations and then attenuate the transmission of the disturbance to the experiment. Some well-defined vibration sources are: experiment operations, pumps, fans, antenna movements, ventilation systems and robotic manipulators. In some cases, it is possible to isolate the source using simple vibration dampers, shock absorbers and other isolation devices. The problem with simple isolation systems is that not all vibration frequencies are attenuated, especially frequencies less than 0.1 Hz. Therefore, some disturbances are actually emitted into the environment. Sometimes vibration sources are not well defined, or cannot be controlled. These include thermal "creak," random acoustic vibrations, aerodynamic drag, crew activities, and other similar disturbances. On some "microgravity missions," such as the United States Microgravity Laboratory (USML) and the International Microgravity Laboratory (IML) missions, the goal was to create extended quiescent times and limit crew activity during these times. This might be possible for short periods, but for extended durations it is impossible due to the nature of the space environment. On the International Space Station (ISS), vehicle attitude readjustments are required to keep the vehicle in a minimum torque orientation and other experimental activities will occur continually, both inside and outside the station. Since all vibration sources cannot be controlled, the task of attenuating the disturbances is the only realistic alternative. Several groups have independently developed technology to isolate payloads from the space environment. Since 1970, Honeywell's Satellite Systems Division has designed several payload isolation systems and vibration attenuators. From 1987 to 1992, NASA's Lewis Research Center (LeRC) performed research on isolation technology and developed a 6 degree-of-freedom (DOF) isolator and tested the system during 70 low gravity aircraft flight trajectories. Beginning in early 1995, NASA's Marshall Space Flight Center (MSFC) and McDonnell Douglas Aerospace (MDA) jointly developed the STABLE (Suppression of Transient Accelerations By Levitation Evaluation) isolation system. This 5 month accelerated effort produced the first flight of an active microgravity vibration isolation system on STS-73/USML-02 in late October 1995. The Canadian Space Agency developed the Microgravity Vibration Isolation Mount (MIM) for isolating microgravity payloads and this system began operating on the Russian Mir Space Station in May 1996. The Boeing Defense & Space Group, Missiles & Space Division developed the Active Rack Isolation System (ARIS) for isolating payloads in a standard payload rack. ARIS was tested in September 1996 during the STS-79 mission to Mir. Although these isolation systems differ in their technological approach, the objective is to isolate payloads from disturbances. The following sections describe the technologies behind these systems and the different types of hardware used to perform isolation. The purpose of these descriptions is not to detail the inner workings of the hardware but to give the reader an idea of the technology and uses of the hardware components. Also included in the component descriptions is a paragraph detailing some of the advances in isolation technology for that particular component. The final section presents some concluding thoughts and a summary of anticipated advances in research and development for isolating microgravity experiments.
... meets the source water quality requirements for installing the small system variance technology...: (i) The quality of the source water for the public water system; and (ii) Removal efficiencies and expected useful life of the small system variance technology. ...
... meets the source water quality requirements for installing the small system variance technology...: (i) The quality of the source water for the public water system; and (ii) Removal efficiencies and expected useful life of the small system variance technology. ...
... control technology (BCT). 415.237 Section 415.237 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS INORGANIC CHEMICALS MANUFACTURING POINT SOURCE... control technology (BCT). Except as provided in 40 CFR 125.30 through 125.32, any existing point source...
... control technology (BCT). 415.207 Section 415.207 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS INORGANIC CHEMICALS MANUFACTURING POINT SOURCE... technology (BCT). Except as provided in 40 CFR 125.30 through 125.32 any existing point source subject to...
... control technology (BCT). 415.227 Section 415.227 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS INORGANIC CHEMICALS MANUFACTURING POINT SOURCE... technology (BCT). Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to...
The Clean Air Act establishes a two-stage regulatory process for addressing emissions of hazardous air pollutants (HAPs) from stationary sources. In the first stage, the Act requires the EPA to develop technology-based standards for categories of industrial sources. We have lar...
Overview of Combined Heat+Power PowerElectricity Natural Gas Heat + Cooling Natural Gas or Biogas ...Fuel Cell Technologies Program eere.energy.gov Source: US DOE 10/2010 Biogas Benefits: Preliminary Analysis Stationary fuel...with the national grid. Source: US DOE 1/2011 6 | Fuel Cell Technologies Program eere.energy.gov Biogas Resource Example
Open-tube diffusion techniques used between 450 and 600° C are described which involve the supply of diffusant from a vapour source (via a solution) and a solid evaporated metal source. Investigations of Zn into InP and InGaAs(P) have been undertaken using both sources. SIMS profile analyses show that in the case of the vapour source the profiles indicate a concentration-dependent diffusion coefficient while the solid source diffusions can be well described by a Gaussian-type profile. The usefulness of the vapour source method has been demonstrated in the fabrication of bipolar transistors which exhibit good d.c. characteristics. The solid source method is limited by the slow diffusion velocity and more gradual profile. The InGaAs(P)/InP materials system has important applications in optical communications and future high speed microwave and switching devices. Useful technologies allied to the introduction of impurities into Si by diffusion, have gradually been emerging for use in the III-V semiconductor family. Closed tube systems1 have been used in order to contain the volatile group V species and prevent surface erosion. In addition, simpler open tube systems2,3 have been developed that maintain a sufficient overpressure of the group V element. Zn and Cd p-dopants have been studied extensively because of the volatility and relatively large diffusion rates in III-V semiconductors. Opentube diffusion into both InP and InGaAs2-6 has been studied but little detail has appeared concerning InGaAs and InGaAsP. In this paper we describe a comprehensive study of the diffusion of Zn into InP and InGaAs(P) using both open-tube vapour source and a Au/Zn/Au evaporated solid source with SiNx acting both as a mask and also an encapsulant to prevent loss of Zn and decomposition of the substrate material. The techniques have been successfully applied to the fabrication of InP/lnGaAs heterojunction bipolar transistors which show good dc characteristics. Reference to InGaAs in the text implies the InP lattice-matched composition In0.53Ga0.47As.
Campbell, Todd; Longhurst, Max; Duffy, Aaron M.; Wolf, Paul G.; Shelton, Brett E.
2013-10-01
This qualitative study examines teacher orientations and technology-enhanced tools for student learning within a science literacy framework. Data for this study came from a group of 10 eighth grade science teachers. Each of these teachers was a participant in a professional development (PD) project focused on reformed and technology-enhanced science instruction shaped by national standards documents. The research is focused on identifying teacher orientations and use of technology-enhanced tools prior to or unaffected by PD. The primary data sources for this study are drawn from learning journals and classroom observations. Qualitative methods were used to analyze learning journals, while descriptive statistics were used from classroom observations to further explore and triangulate the emergent qualitative findings. Two teacher orientation teacher profiles were developed to reveal the emergent teacher orientation dimensions and technology-enhanced tool categories found: "more traditional teacher orientation profile" and "toward a reformed-based teacher orientation profile." Both profiles were founded on "knowledge of" beliefs about the goals and purposes for science education, while neither profile revealed sophisticated beliefs about the nature of science. The "traditional" profile revealed more teacher-centered beliefs about science teaching and learning, and the "towards reformed-based" profile revealed student-centered beliefs. Finally, only technology-enhanced tools supportive of collaborative construction of science knowledge were found connected to the "towards reformed-based" profile. This research is concluded with a proposed "reformed-based teacher orientation profile" as a future target for science teaching and learning with technology-enhanced tools in a science literacy framework.
Anthropogenic emissions have been controlled in recent years in China to mitigate fine particulate matter (PM2.5) pollution. Recent studies show that sulfate dioxide (SO2)-only control cannot reduce total PM2.5 levels efficiently. Other species such as nitrogen oxide, ammonia, black carbon, and organic carbon may be equally important during particular seasons. Furthermore, each species is emitted from several anthropogenic sectors (e.g., industry, power plant, transportation, residential and agriculture). On the other hand, contribution of one emission sector to PM2.5 represents contributions of all species in this sector. In this work, two model-based methods are used to identify the most influential emission sectors and areas to PM2.5. The first method is the source apportionment (SA) based on the Particulate Source Apportionment Technology (PSAT) available in the Comprehensive Air Quality Model with extensions (CAMx) driven by meteorological predictions of the Weather Research and Forecast (WRF) model. The second method is the source sensitivity (SS) based on an adjoint integration technique (AIT) available in the GEOS-Chem model. The SA method attributes simulated PM2.5 concentrations to each emission group, while the SS method calculates their sensitivity to each emission group, accounting for the non-linear relationship between PM2.5 and its precursors. Despite their differences, the complementary nature of the two methods enables a complete analysis of source-receptor relationships to support emission control policies. Our objectives are to quantify the contributions of each emission group/area to PM2.5 in the receptor areas and to intercompare results from the two methods to gain a comprehensive understanding of the role of emission sources in PM2.5 formation. The results will be compared in terms of the magnitudes and rankings of SS or SA of emitted species and emission groups/areas. GEOS-Chem with AIT is applied over East Asia at a horizontal grid resolution of 0.5° (Lat) × 0.67° (Lon). WRF/CAMx with PSAT is applied to nested grids: 36-km × 36-km over China and 12-km × 12-km over northern China. These simulations are performed for 2006 and 2011. Beijing and northern Hebei are selected as representative receptor areas. Simulated surface concentrations by both models are evaluated with available observations in China. Focusing on inorganic aerosols (sulfate, nitrate and ammonium), preliminary SS results from GEOS-Chem/AIT at Beijing identify the top three major emission sectors to be agriculture, residential, and transportation in winter and agriculture, industry and power plant in summer. The top four source areas are northern Hebei, local, Neimenggu, and Liaoning in winter and northern Hebei, local, Shandong, and southern Hebei in summer. The synthesis of SS and SA for influential emission groups or areas from this work will provide a quantitative basis for emission control strategy development and policy making for PM2.5 control in China.
The Goal of the GMAT project is to develop new space trajectory optimization and mission design technology by working inclusively with ordinary people, universities businesses and other government organizations; and to share that technology in an open and unhindered way. GMAT's a free and open source software system; free for anyone to use in development of new mission concepts or to improve current missions, freely available in source code form for enhancement or future technology development.
Aircraft and airport noise reduction technology programs conducted by NASA are presented. The subjects discussed are: (1) effects of aircraft noise on individuals and communities, (2) status of aircraft source noise technology, (3) operational procedures to reduce the impact of aircraft noise, and (4) NASA relations with military services in aircraft noise problems. References to more detailed technical literature on the subjects discussed are included.
The Environmental Technology Verification (ETV) Program, a five-year pilot, provides technology purchasers, permitters and developers with objective, quality assured performance data on new and/or improved technologies. EPA has partnered with the National Sanitation Foundation (...
This project is designed to develop methods for pre-combustion coal remediation by implementing recent advances in enzyme biochemistry. The novel approach of this study is incorporation of hydrophilic oxidative enzymes in reverse micelles in an organic solvent. Enzymes from commercial sources or microbial extracts are being investigated for their capacity to remove organic sulfur from coal by oxidation of the sulfur groups, splitting of C-S bonds and loss of sulfur as sulfuric acid. Dibenzothiophen (DBT) and ethylphenylsulfide (EPS) are serving as models of organic sulfur-containing components of coal in initial studies.
The Japan Atomic Energy Research Institute free-electron laser (JAERI FEL) group at Tokai, Ibaraki, Japan has successfully developed one of the most advanced and newest accelerator technologies named "superconducting energy recovery linacs (ERLs)" and some applications in near future using the ERLs. In the text, the current operation and high power JAERI ERL-FEL 10 kW upgrading program, ERL-light source design studies, prevention of the stainless-steel cold-worked stress-corrosion cracking failures and decommissioning of nuclear power plants in nuclear energy industries were reported and discussed briefly as a typical application of the ERL-FEL.
Solar heat, as a potential source of clean energy, is available to all of us. Extensive R and D efforts are being made to effectively utilize this renewable energy source. A variety of different technologies for utilizing solar energy have been proven to be technically feasible. Here, some of the most promising technologies and their applications are briefly described. These are: Solar Heating and Cooling of Buildings (SHACOB), Solar Thermal Energy Conversion (STC), Wind Energy Conversion (WECS), Bioconversion to Fuels (BCF), Ocean Thermal Energy Conversion (OTEC), and Photovoltaic Electric Power Systems (PEPS). Special emphasis is placed on the discussion of the SHACOB technologies, since the technologies are being expeditiously developed for the near commercialization.
The objective of this project was to develop a purely solid-state based, thus miniaturized, far-infrared (FIR) (also known as terahertz (THz)) wave source using III-V semiconductor nanostructures for biomolecular detection and sensing. Many biomolecules, such as DNA and proteins, have distinct spectroscopic features in the FIR wavelength range as a result of vibration-rotation-tunneling motions and various inter- and intra-molecule collective motions. Spectroscopic characterization of such molecules requires narrow linewidth, sufficiently high power, tunable (in wavelength), and coherent FIR sources. Unfortunately, the FIR frequency is one of the least technologically developed ranges in the electromagnetic spectrum. Currently available FIR sources based on non-solid state technology are bulky, inefficient, and very often incoherent. In this project we investigated antimonide based compound semiconductor (ABCS) nanostructures as the active medium to generate FIR radiation. The final goal of this project was to demonstrate a semiconductor THz source integrated with a pumping diode laser module to achieve a compact system for biomolecular applications.
Reijonen, J; Gicquel, F; Hahto, S K; King, M; Lou, T-P; Leung, K-N
2005-01-01
The plasma and ion source technology group in Lawrence Berkeley National Laboratory is developing advanced, next generation D-D neutron generators. There are three distinctive developments, which are discussed in this presentation, namely, multi-stage, accelerator-based axial neutron generator, high-output co-axial neutron generator and point source neutron generator. These generators employ RF-induction discharge to produce deuterium ions. The distinctive feature of RF-discharge is its capability to generate high atomic hydrogen species, high current densities and stable and long-life operation. The axial neutron generator is designed for applications that require fast pulsing together with medium to high D-D neutron output. The co-axial neutron generator is aimed for high neutron output with cw or pulsed operation, using either the D-D or D-T fusion reaction. The point source neutron generator is a new concept, utilizing a toroidal-shaped plasma generator. The beam is extracted from multiple apertures and focus to the target tube, which is located at the middle of the generator. This will generate a point source of D-D, T-T or D-T neutrons with high output flux. The latest development together with measured data will be discussed in this article.
... Whitney A Subsidiary of United Technologies Corporation Far Group and Experimental Test Group East... Technologies Corporation, FAR Group and Experimental Test Group, supplies/supports and operates as an extension... Test Group. The amended notice applicable to TA-W-75,152 is hereby issued as follows: ``All workers of...
During 1983-84, Xerox Corporation was undergoing a change in corporate style through a process of training and altered behavior known as Leadership Through Quality. One tenet of Leadership Through Quality was benchmarking, a procedure whereby all units of the corporation were asked to compare their operation with the outside world. As a part of the first wave of benchmark studies, Xerox Corporate Research Group studied the processes of research management, technology transfer, and research planning in twelve American and Japanese companies. The approach taken was to separate `research yield' and `research productivity' (as defined by Richard Foster) and to seek information about how these companies sought to achieve high- quality results in these two parameters. The most significant findings include the influence of company culture, two different possible research missions (an innovation resource and an information resource), and the importance of systematic personal interaction between sources and targets of technology transfer.
HTML5 is being developed as the next major revision of HTML (Hypertext Markup Language), the core markup language of the World Wide Web. It aims at reducing the need for proprietary, plug-in-based rich Internet application (RIA) technologies such as Adobe Flash. The canvas element is part of HTML5 and is used to draw graphics using scripting (e.g., JavaScript). This paper introduces Cartagen, an open-source, vector-based, client-side framework for rendering plug-in-free, offline-capable, interactive maps in native HTML5 on a wide range of Web browsers and mobile phones. Cartagen was developed at MIT Media Lab's Design Ecology group. Potential applications of the technology as an enabler for participatory online mapping include mapping real-time air pollution, citizen reporting, and disaster response, among many other possibilities. PMID:20199681
This occasional paper analyzes the general security issues and trends relating to maritime trafficking of radiological and nuclear material using small vessels, minor ports, and unchecked areas of coastline existing in the Eastern Indian Ocean Region today. By the Eastern Indian Ocean Region is meant the area starting from the tip of the Indian peninsula in the west to the Straits of Malacca in the east. It lays focus on the potential sources of nuclear or radiological material that may be trafficked here. It further undertakes a study of the terrorist groups active in the region as well as themore » multinational or national interdiction organizations that have been created to counter maritime threats. It also seeks to discern the various technologies for detecting materials of concern available in the area. Finally, it ascertains possible methods and technologies to improve the maritime security system in the region.« less
The electron beam ion source (EBIS) and its trap variant [electron beam ion trap (EBIT)] celebrated their 40th and 20th anniversary, respectively, at the EBIS/T Symposium 2007 in Heidelberg. These technologically challenging sources of highly charged ions have seen a broad development in many countries over the last decades. In contrast to most other ion sources the recipe of improvement was not "sorcery" but a clear understanding of the physical laws and obeying the technological constraints. This review will report important achievements of the past as well as promising developments in the future.
This document describes the residual risk assessment for the Magnetic Tape Manufacturing source category. For stationary sources, section 112 (f) of the Clean Air Act requires EPA to assess risks to human health and the environment following implementation of technology-based control standards. If these technology-based control standards do not provide an ample margin of safety, then EPA is required to promulgate addtional standards. This document describes the methodology and results of the residual risk assessment performed for the Magnetic Tape Manufacturing source category. The results of this analyiss will assist EPA in determining whether a residual risk rule for this source category is appropriate.
The successful radiological security cooperation between the U.S. and China to secure at-risk sites near venues of the 2008 Beijing Summer Olympics has led to an expanded bilateral nonproliferation cooperation scope. The U.S. Department of Energy’s National Nuclear Security Administration, the Chinese Atomic Energy Authority and the China Ministry of Environmental Protection are continuing joint efforts to secure radiological sources throughout China under the U.S.-China Peaceful Uses of Nuclear Technology (PUNT) Agreement. Joint cooperation activities include physical security upgrades of sites with International Atomic Energy Agency (IAEA) Category 1 radiological sources, packaging, recovery, and storage of high activity transuranic andmore » beta gamma sources, and secure transportation practices for the movement of recovered sources. Expansion of cooperation into numerous provinces within China includes the use of integrated training workshops that will demonstrate methodologies and best practices between U.S. and Chinese radiological source security and recovery experts. The fiscal year 2009 expanded scope of cooperation will be conducted similar to the 2008 Olympic cooperation with the Global Threat Reduction Initiative taking the lead for the U.S., PUNT being the umbrella agreement, and Los Alamos, Sandia, and Oak Ridge National Laboratories operating as technical working groups. This paper outlines the accomplishments of the joint implementation and training efforts to date and discusses the possible impact on future U.S./China cooperation.« less
... control technology. 424.17 Section 424.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... control technology. Except as provided in §§ 125.30 through 125.32, any existing point source subject to...
... Technology (BART) controls for four sources. These sources are Freeport-McMoRan Incorporated (FMMI) Miami... Electric Power Cooperative (AEPCO) Apache Generating Station. However, we are proposing to disapprove other...) The initials BART mean or refer to Best Available Retrofit Technology. (5) The term Class I area...
program for any purpose (Freedom 0). • The freedom to study how the program works, and adapt it to individual needs (Freedom 1). Access to the source...manage information for many purposes. Today a key technology that allows developers to make Web applications is server-side programming to generate a
For-profit organizations are constantly evaluating new technologies to gain competitive advantage. One such technology, application software, has changed significantly over the past 25 years with the introduction of Open Source Software (OSS). In contrast to commercial software that is developed by private companies and sold to organizations, OSS…
National Science Foundation, Washington, DC. Div. of Science Resources Studies.
This pocket guide presents data on research and development (R&D) funding, human resources, and international science and technology (S&T) indicators. Among the R&D funding data provided are: national R&D funding by source and performer; federal R&D obligations by agency and character of work; industrial expenditures by sources of funds and…
This talk will present an overview of the current technologies that are available for implementing local oscillator sources for 1-3 THz applications. Progress to date on specific components will be discussed in some detail. Outstanding issues and concerns regarding practical implementation of these new technologies will also be discussed.
The report gives results of an assessment of potential control technologies for methylene chloride (also known as dichloromethane or DCM) emission sources at Eastman Kodak Company's Kodak Park facility in Rochester, NY. DCM is a solvent used by Kodak in the manufacture of cellulo...
... control technology. 424.17 Section 424.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... control technology. Except as provided in §§ 125.30 through 125.32, any existing point source subject to...
... control technology. 424.17 Section 424.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... control technology. Except as provided in §§ 125.30 through 125.32, any existing point source subject to...
... control technology. 424.17 Section 424.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... control technology. Except as provided in §§ 125.30 through 125.32, any existing point source subject to...
... control technology. 424.17 Section 424.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... control technology. Except as provided in §§ 125.30 through 125.32, any existing point source subject to...
This directory is intended to provide a link between suppliers of solar energy technology and information and potential users of these products. Included are over 1400 national and international entries. These listings include architects, associations, education sources, wind power technology and information sources, solar research organizations,…
This report summarizes the results of the Mine Waste Technology Program (MWTP) Activity III, Project 3, In Situ Source Control of Acid Generation Using Sulfate-Reducing Bacteria, funded by the U.S. Environmental Protection Agency (EPA) and jointly administered by EPA and the U.S....
Parette, Howard P.; Hourcade, Jack J.; Blum, Craig; Watts, Emily H.; Stoner, Julia B.; Wojcik, Brian W.; Chrismore, Shannon B.
2013-01-01
This article presents a preliminary examination of the potential of Technology User Groups as a professional development venue for early childhood education professionals in developing operational and functional competence in using hardware and software components of a Technology toolkit. Technology user groups are composed of varying numbers of…
The Environmental Technology Verification report discusses the technology and performance of the Fuel-Borne Catalyst with Mitsui/PUREarth Catalyzed Wire Mesh Filter manufactured by Clean Diesel Technologies, Inc. The technology is a platinum/cerium fuel-borne catalyst in commerci...
We show that the progress of technological knowledge is an inherently ecological process, wherein the growth rate of each technology domain depends on dynamics occurring in "other" technology domains. We identify two sources of ecological interdependence among technology domains. First, there are symbiotic interdependencies, implying…
Doos, Lucy; Packer, Claire; Ward, Derek; Simpson, Sue; Stevens, Andrew
2017-01-01
Objective To describe and classify health technologies predicted in forecasting studies. Design and methods A portrait describing health technologies predicted in 15 forecasting studies published between 1986 and 2010 that were identified in a previous systematic review. Health technologies are classified according to their type, purpose and clinical use; relating these to the original purpose and timing of the forecasting studies. Data sources All health-related technologies predicted in 15 forecasting studies identified in a previously published systematic review. Main outcome measure Outcomes related to (1) each forecasting study including country, year, intention and forecasting methods used and (2) the predicted technologies including technology type, purpose, targeted clinical area and forecast timeframe. Results Of the 896 identified health-related technologies, 685 (76.5%) were health technologies with an explicit or implied health application and included in our study. Of these, 19.1% were diagnostic or imaging tests, 14.3% devices or biomaterials, 12.6% information technology systems, eHealth or mHealth and 12% drugs. The majority of the technologies were intended to treat or manage disease (38.1%) or diagnose or monitor disease (26.1%). The most frequent targeted clinical areas were infectious diseases followed by cancer, circulatory and nervous system disorders. The most frequent technology types were for: infectious diseases—prophylactic vaccines (45.8%), cancer—drugs (40%), circulatory disease—devices and biomaterials (26.3%), and diseases of the nervous system—equally devices and biomaterials (25%) and regenerative medicine (25%). The mean timeframe for forecasting was 11.6 years (range 0–33 years, median=10, SD=6.6). The forecasting timeframe significantly differed by technology type (p=0.002), the intent of the forecasting group (p<0.001) and the methods used (p<001). Conclusion While description and classification of predicted health-related technologies is crucial in preparing healthcare systems for adopting new innovations, further work is needed to test the accuracy of predictions made. PMID:28760796
Industrial ecology is the network of all industrial processes as they may interact with each other and live off each other, not only in the economic sense, but also in the sense of direct use of each other's material and energy wastes and products. This paper, which reflects upon the papers and discussions at the National Academy of Sciences Colloquium on Industrial Ecology on May 20-21, 1991, is structured around 10 questions. Do sociotechnical systems have long-range environmental goals? How is the concept of industrial ecology useful and timely? What are environmental technologies? Is there a systematic way to choose among alternatives for improving the ecology of technologies? What are ways to measure performance with respect to industrial ecology? What are the sources and rates of innovation in environmental technologies? How is the market economy performing with respect to industrial ecology? What will be the effect of the ecological modernization of the developed nations of the North on the developing countries of the South? How can creative interaction on environmental issues be fostered among diverse social groups? How must research and education change? PMID:11607273
Buynak, C. F.; Blackshire, J.; Lindgren, E. A.; Jata, K. V.
2008-02-01
As one of the primary data and information sources in the maintenance of USAF Aging Military Fleet, NDE plays a major role in the definition and operation of maintenance processes on these aircraft. To focus new NDE developmental efforts, the AFRL NDE R&D group has the charter to research, develop and transition new capabilities to the field and depot users. This multi-faceted task is achieved through a balanced NDE and on-board sensor development program with the ultimate goal to transition technology to the Air Force user Commands. Technology requirements for NDE and Material State Awareness emerge from Air Force Initiatives to realize Condition Based Maintenance and to develop the "Depot of the Future". This evening session will present an overview of Air Force Initiatives, emerging R&D issues for Structural Health Monitoring and NDE methodologies as well as basic research initiatives within the Air Force Research Laboratory. It is intended that the session provide an open forum to pursue paths for new technology development and application.
Strout, Tania D; DiFazio, Rachel L; Vessey, Judith A
2017-06-22
Background Bullying is a critical public health problem and a screening tool for use in healthcare is needed. Focus groups are a common tool for generating qualitative data when developing an instrument and evidence suggests that technology-enhanced focus groups can be effective in simultaneously engaging participants from diverse settings. Aim To examine the use of technology-enhanced focus groups in generating an item pool to develop a youth-bullying screening tool. Discussion The authors explore methodological and ethical issues related to conducting technology-enhanced focus groups, drawing on their experience in developing a youth-bullying measure. They conducted qualitative focus groups with professionals from the front lines of bullying response and intervention. They describe the experience of conducting technology-enhanced focus group sessions, focusing on the methodological and ethical issues that researchers engaging in similar work may encounter. Challenges associated with this methodology include establishing rapport among participants, privacy concerns and limited non-verbal communication. Conclusion The use of technology-enhanced focus groups can be valuable in obtaining rich data from a wide variety of disciplines and contexts. Organising these focus groups was inexpensive and preferred by the study's participants. Implications for practice Researchers should consider using technology-enhanced focus groups to generate data to develop health-related measurement tools.
The U.S. Department of Energy (DOE) Wind Program is committed to helping the nation secure cost-competitive sources of renewable energy through the development and deployment of innovative wind power technologies. By investing in improvements to wind plant design, technology development, and operation as well as developing tools to identify the highest quality wind resources, the Wind Program serves as a leader in making wind energy technologies more competitive with traditional sources of energy and a larger part of our nation’s renewable energy portfolio.
Energy technologies to meet the power requirements of future space missions are reviewed. Photovoltaic, solar dynamic, and solar thermal technologies are discussed along with techniques for energy storage and power management and distribution.
Increased output of greenhouse gases, particularly carbon dioxide (CO₂), into the atmosphere from anthropogenic sources is of great concern. A potential technology to reduce CO₂ emissions is geologic carbon sequestration. This technology is currently being evaluated in the United States and throughout the world. The geology of the Illinois Basin exhibits outstanding potential as a carbon sequestration target, as demonstrated by the ongoing Illinois Basin – Decatur Project that is using the Mt. Simon Sandstone reservoir and Eau Claire Shale seal system to store and contain 1 million tonnes of CO₂. The Knox Group-Maquoketa Shale reservoir and seal system, locatedmore » stratigraphically above the Mt. Simon Sandstone-Eau Claire Shale reservoir and seal system, has little economic value as a resource for fossil fuels or as a potable water source, making it ideal as a potential carbon sequestration target. In order for a reservoir-seal system to be effective, it must be able to contain the injected CO₂ without the potential for the release of harmful contaminants liberated by the reaction between CO₂-formation fluids and reservoir and seal rocks. This study examines portions of the Knox Group (Potosi Dolomite, Gunter Sandstone, New Richmond Sandstone) and St. Peter Sandstone, and Maquoketa Shale from various locations around the Illinois Basin. A total of 14 rock and fluid samples were exposed to simulated sequestration conditions (9101–9860 kPa [1320–1430 psi] and 32°–42°C [90°– 108°F]) for varying amounts of time (6 hours to 4 months). Knox Group reservoir rocks exhibited dissolution of dolomite in the presence of CO₂ as indicated by petrographic examination, X-ray diffraction analysis, and fluid chemistry analysis. These reactions equilibrated rapidly, and geochemical modeling confirmed that these reactions reached equilibrium within the time frames of the experiments. Pre-reaction sample mineralogy and postreaction fluid geochemistry from this study suggests only limited potential for the release of United States Environmental Protection Agency regulated inorganic contaminants into potable water sources. Short-term core flood experiments further verify that the carbonate reactions occurring in Knox Group reservoir samples reach equilibrium rapidly. The core flood experiments also lend insight to pressure changes that may occur during CO₂ injection. The Maquoketa Shale experiments reveal that this rock is initially chemically reactive when in contact with CO₂ and brine. However, due to the conservative nature of silicate and clay reaction kinetics and the rapid equilibration of carbonate reactions that occur in the shale, these reactions would not present a significant risk to the competency of the shale as an effective seal rock.« less
The first detection of Gravitational Waves (GW) by ground based detectors will open up a fundamentally new observational window to the Universe with implications for astrophysics and eventually cosmology and fundamental physics. The realization of GW astronomy requires a global network of Advanced GW detectors including upcoming observatories like KAGRA (Japan) and LIGO-India to provide good sky localization of the GW sources. LIGO-India is expected to play a key role in locating and deciphering the sources contributing to the GW symphony. The current status of LIGO-India project and the exciting future research opportunities of this ambitious Indo-US collaboration in science, technology and computation will be finally indicated. Acknowledge CISA and APS for the Award of a APS Beller Lectureship. BRI supported by the AIRBUS Group Corporate Foundation through a visiting professorship, which is part of the ``Mathematics of Complex Systems'' chair at ICTS.
Kristanto, A.; Mustaji; Mariono, A.; Sulistiowati; Nuryati, D. W.
2018-01-01
In this era of technology in Indonesia, various publishers introduce themselves and participate in advancing the quality of education through the publication of various books as the learning sources. One of the publishers is PT. JP Press. In compiling the learning sources, we found some problems that are left unresolved by the editor. The purpose of this research is to overcome the problems that exist in PT. JP Press by developing media module. This development research uses the ADDIE model. The types of data used in this study are qualitative and quantitative data obtained based on the results of structured interviews with material experts and media experts, as well as the editorial response questionnaire provided for individual try-out and small group try-out. Therefore, it can be concluded that the medium of elementary school supplementary module proposed to the editors of PT. JP Press is valuable to be used in the teaching and learning activities.
The number of publications on optical coherence tomography (OCT) continues to double every three years. Traditionally applied to imaging the eye, OCT is now being extended to fields outside ophthalmology and optometry. Widening its applicability, progress in the core engine of the technology, and impact on development of novel optical sources, make OCT a very active and rapidly evolving field. Trends in the developments of different specific devices, such as optical sources, optical configurations and signal processing will be presented. Encompassing studies on both the configurations as well as on signal processing themes, current research in Kent looks at combining spectral domain with time domain imaging for long axial range and simultaneous imaging at several depths. Results of the collaborative work of the Applied Optics Group in Kent with organisers of this conference will be presented, with reference to 3D monitoring of abfraction.
Peek, Sebastiaan Theodorus Michaël; Wouters, Eveline J M; Luijkx, Katrien G; Vrijhoef, Hubertus J M
2016-05-03
There is a growing interest in empowering older adults to age in place by deploying various types of technology (ie, eHealth, ambient assisted living technology, smart home technology, and gerontechnology). However, initiatives aimed at implementing these technologies are complicated by the fact that multiple stakeholder groups are involved. Goals and motives of stakeholders may not always be transparent or aligned, yet research on convergent and divergent positions of stakeholders is scarce. To provide insight into the positions of stakeholder groups involved in the implementation of technology for aging in place by answering the following questions: What kind of technology do stakeholders see as relevant? What do stakeholders aim to achieve by implementing technology? What is needed to achieve successful implementations? Mono-disciplinary focus groups were conducted with participants (n=29) representing five groups of stakeholders: older adults (6/29, 21%), care professionals (7/29, 24%), managers within home care or social work organizations (5/29, 17%), technology designers and suppliers (6/29, 21%), and policy makers (5/29, 17%). Transcripts were analyzed using thematic analysis. Stakeholders considered 26 different types of technologies to be relevant for enabling independent living. Only 6 out of 26 (23%) types of technology were mentioned by all stakeholder groups. Care professionals mentioned fewer different types of technology than other groups. All stakeholder groups felt that the implementation of technology for aging in place can be considered a success when (1) older adults' needs and wishes are prioritized during development and deployment of the technology, (2) the technology is accepted by older adults, (3) the technology provides benefits to older adults, and (4) favorable prerequisites for the use of technology by older adults exist. While stakeholders seemed to have identical aims, several underlying differences emerged, for example, with regard to who should pay for the technology. Additionally, each stakeholder group mentioned specific steps that need to be taken to achieve successful implementation. Collectively, stakeholders felt that they need to take the leap (ie, change attitudes, change policies, and collaborate with other organizations); bridge the gap (ie, match technology with individuals and stimulate interdisciplinary education); facilitate technology for the masses (ie, work on products and research that support large-scale rollouts and train target groups on how to use technology); and take time to reflect (ie, evaluate use and outcomes). Stakeholders largely agree on the direction in which they should be heading; however, they have different perspectives with regard to the technologies that can be employed and the work that is needed to implement them. Central to these issues seems to be the tailoring of technology or technologies to the specific needs of each community-dwelling older adult and the work that is needed by stakeholders to support this type of service delivery on a large scale.
Wouters, Eveline JM; Luijkx, Katrien G; Vrijhoef, Hubertus JM
2016-01-01
Background There is a growing interest in empowering older adults to age in place by deploying various types of technology (ie, eHealth, ambient assisted living technology, smart home technology, and gerontechnology). However, initiatives aimed at implementing these technologies are complicated by the fact that multiple stakeholder groups are involved. Goals and motives of stakeholders may not always be transparent or aligned, yet research on convergent and divergent positions of stakeholders is scarce. Objective To provide insight into the positions of stakeholder groups involved in the implementation of technology for aging in place by answering the following questions: What kind of technology do stakeholders see as relevant? What do stakeholders aim to achieve by implementing technology? What is needed to achieve successful implementations? Methods Mono-disciplinary focus groups were conducted with participants (n=29) representing five groups of stakeholders: older adults (6/29, 21%), care professionals (7/29, 24%), managers within home care or social work organizations (5/29, 17%), technology designers and suppliers (6/29, 21%), and policy makers (5/29, 17%). Transcripts were analyzed using thematic analysis. Results Stakeholders considered 26 different types of technologies to be relevant for enabling independent living. Only 6 out of 26 (23%) types of technology were mentioned by all stakeholder groups. Care professionals mentioned fewer different types of technology than other groups. All stakeholder groups felt that the implementation of technology for aging in place can be considered a success when (1) older adults’ needs and wishes are prioritized during development and deployment of the technology, (2) the technology is accepted by older adults, (3) the technology provides benefits to older adults, and (4) favorable prerequisites for the use of technology by older adults exist. While stakeholders seemed to have identical aims, several underlying differences emerged, for example, with regard to who should pay for the technology. Additionally, each stakeholder group mentioned specific steps that need to be taken to achieve successful implementation. Collectively, stakeholders felt that they need to take the leap (ie, change attitudes, change policies, and collaborate with other organizations); bridge the gap (ie, match technology with individuals and stimulate interdisciplinary education); facilitate technology for the masses (ie, work on products and research that support large-scale rollouts and train target groups on how to use technology); and take time to reflect (ie, evaluate use and outcomes). Conclusions Stakeholders largely agree on the direction in which they should be heading; however, they have different perspectives with regard to the technologies that can be employed and the work that is needed to implement them. Central to these issues seems to be the tailoring of technology or technologies to the specific needs of each community-dwelling older adult and the work that is needed by stakeholders to support this type of service delivery on a large scale. PMID:27143097
Pharmaceuticals comprise a large and diverse array of contaminants that can occur in the environmentfrom the combined activities and actions of multitudes of individuals as well as from veterinary andagricultural use. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for med
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
The U.S. Department of Energy’s Vehicle Technologies Office, Materials area commissioned a study to model and assess manufacturing economics of alternative design and production strategies for a series of lightweight vehicle concepts. The strategic targets were a 40% and a 45% mass reduction relative to a standard North American midsize passenger sedan at an effective cost of $3.42 per pound (lb) saved. The baseline vehicle was an average of several available vehicles in this class. Mass and cost breakdowns from several sources were used, including original equipment manufacturers’ (OEMs’) input through U.S. Department of Energy’s Vehicle Technologies Office programs andmore » public presentations, A2Mac1 LLC’s teardown information, Lotus Engineering Limited and FEV, Inc. breakdowns in their respective lightweighting studies, and IBIS Associates, Inc.’s decades of experience in automotive lightweighting and materials substitution analyses. Information on lightweighting strategies in this analysis came from these same sources and the ongoing U.S. Department of Energy-funded Vehma International of America, Inc. /Ford Motor Company Multi-Material Lightweight Prototype Vehicle Demonstration Project, the Aluminum Association Transportation Group, and many United States Council for Automotive Research’s/United States Automotive Materials Partnership LLC lightweight materials programs.« less
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. Subtask 3: T
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. Subtask 3: T
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact Field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
While pharmaceuticals are ubiquitous trace contaminants in the environment, thetypes, concentrations, and relative abundances of individual residues will vary depending on thegeographic locale and time of year, primarily a reflection of differing and varying prescribing andconsumption practices. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under the Contact Field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquirie
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
This presentation will explore the many facets of research and development for emerging contaminants within the USEPA's National Exposure Research Laboratories (Athens, Cincinnati, Las Vegas, and Research Triangle Park). The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact Field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
Possible environmental sinks (wastewater effluents, biosolids, sediments) of macrolide antibiotics (i.e., azithromycin, roxithromycin and clarithromycin)are investigated using state-of-the-art analytical chemistry techniques. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews
Synthetic musk compounds are manufactured as fragrance materials for consumer products and are consumed in very large quantities worldwide. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. Subtask 3: To apply state-of-the-art envir
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
Giving public water authorities another tool to monitor and measure levels of human waste contamination of waters simply and rapidly would enhance public protection. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. Subtask 3: To ap
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S
Quantum networks require interfacing stationary and flying qubits. These flying qubits are usually nonclassical states of light. Here we consider two of the leading source technologies for nonclassical light, spontaneous parametric down-conversion and single semiconductor quantum dots. Down-conversion delivers high-grade entangled photon pairs, whereas quantum dots excel at producing single photons. We report on an experiment that joins these two technologies and investigates the conditions under which optimal interference between these dissimilar light sources may be achieved.
Zhou, Gang; Wang, Qiang; Zhong, Qi; Zhao, Jinbao; Yang, Kai
2018-01-01
Based on atmospheric volatile organic compounds (VOCs) pollution control requirements during the twelfth-five year plan and the current status of monitoring and management at home and abroad, instrumental architecture and technical characteristics of continuous emission monitoring systems (CEMS) for VOCs emission from stationary sources are investigated and researched. Technological development needs of VOCs emission on-line monitoring techniques for stationary sources in china are proposed from the system sampling pretreatment technology and analytical measurement techniques.
Acoustic logging-while-drilling (LWD) technology has been commercially used in the petroleum industry. However it remains a rather difficult task to invert formation compressional and shear velocities from acoustic LWD signals due to the unwanted strong collar wave, which covers or interferes with signals from the formation. In this paper, seismoelectric LWD is investigated for solving that problem. The seismoelectric field is calculated by solving a modified Poisson's equation, whose source term is the electric disturbance induced electrokinetically by the travelling seismic wave. The seismic wavefield itself is obtained by solving Biot's equations for poroelastic waves. From the simulated waveforms and the semblance plots for monopole, dipole and quadrupole sources, it is found that the electric field accompanies the collar wave as well as other wave groups of the acoustic pressure, despite the fact that seismoelectric conversion occurs only in porous formations. The collar wave in the electric field, however, is significantly weakened compared with that in the acoustic pressure, in terms of its amplitude relative to the other wave groups in the full waveforms. Thus less and shallower grooves are required to damp the collar wave if the seismoelectric LWD signals are recorded for extracting formation compressional and shear velocities.
Hosler, Erik R.; Wood, Obert R.; Barletta, William A.
2017-10-01
Laser-produced plasma (LPP) EUV sources have demonstrated ˜125 W at customer sites, establishing confidence in EUV lithography (EUVL) as a viable manufacturing technology. However, for extension to the 3-nm technology node and beyond, existing scanner/source technology must enable higher-NA imaging systems (requiring increased resist dose and providing half-field exposures) and/or EUV multipatterning (requiring increased wafer throughput proportional to the number of exposure passes). Both development paths will require a substantial increase in EUV source power to maintain the economic viability of the technology, creating an opportunity for free-electron laser (FEL) EUV sources. FEL-based EUV sources offer an economic, high-power/single-source alternative to LPP EUV sources. Should FELs become the preferred next-generation EUV source, the choice of FEL emission architecture will greatly affect its operational stability and overall capability. A near-term industrialized FEL is expected to utilize one of the following three existing emission architectures: (1) self-amplified spontaneous emission, (2) regenerative amplifier, or (3) self-seeding. Model accelerator parameters are put forward to evaluate the impact of emission architecture on FEL output. Then, variations in the parameter space are applied to assess the potential impact to lithography operations, thereby establishing component sensitivity. The operating range of various accelerator components is discussed based on current accelerator performance demonstrated at various scientific user facilities. Finally, comparison of the performance between the model accelerator parameters and the variation in parameter space provides a means to evaluate the potential emission architectures. A scorecard is presented to facilitate this evaluation and provides a framework for future FEL design and enablement for EUVL applications.
DeWerd, Larry A.; Ibbott, Geoffrey S.; Meigooni, Ali S.
2011-02-15
This report addresses uncertainties pertaining to brachytherapy single-source dosimetry preceding clinical use. The International Organization for Standardization (ISO) Guide to the Expression of Uncertainty in Measurement (GUM) and the National Institute of Standards and Technology (NIST) Technical Note 1297 are taken as reference standards for uncertainty formalism. Uncertainties in using detectors to measure or utilizing Monte Carlo methods to estimate brachytherapy dose distributions are provided with discussion of the components intrinsic to the overall dosimetric assessment. Uncertainties provided are based on published observations and cited when available. The uncertainty propagation from the primary calibration standard through transfer to the clinicmore » for air-kerma strength is covered first. Uncertainties in each of the brachytherapy dosimetry parameters of the TG-43 formalism are then explored, ending with transfer to the clinic and recommended approaches. Dosimetric uncertainties during treatment delivery are considered briefly but are not included in the detailed analysis. For low- and high-energy brachytherapy sources of low dose rate and high dose rate, a combined dosimetric uncertainty <5% (k=1) is estimated, which is consistent with prior literature estimates. Recommendations are provided for clinical medical physicists, dosimetry investigators, and source and treatment planning system manufacturers. These recommendations include the use of the GUM and NIST reports, a requirement of constancy of manufacturer source design, dosimetry investigator guidelines, provision of the lowest uncertainty for patient treatment dosimetry, and the establishment of an action level based on dosimetric uncertainty. These recommendations reflect the guidance of the American Association of Physicists in Medicine (AAPM) and the Groupe Europeen de Curietherapie-European Society for Therapeutic Radiology and Oncology (GEC-ESTRO) for their members and may also be used as guidance to manufacturers and regulatory agencies in developing good manufacturing practices for sources used in routine clinical treatments.« less
DeWerd, Larry A.; Ibbott, Geoffrey S.; Meigooni, Ali S.; Mitch, Michael G.; Rivard, Mark J.; Stump, Kurt E.; Thomadsen, Bruce R.; Venselaar, Jack L. M.
2011-01-01
This report addresses uncertainties pertaining to brachytherapy single-source dosimetry preceding clinical use. The International Organization for Standardization (ISO) Guide to the Expression of Uncertainty in Measurement (GUM) and the National Institute of Standards and Technology (NIST) Technical Note 1297 are taken as reference standards for uncertainty formalism. Uncertainties in using detectors to measure or utilizing Monte Carlo methods to estimate brachytherapy dose distributions are provided with discussion of the components intrinsic to the overall dosimetric assessment. Uncertainties provided are based on published observations and cited when available. The uncertainty propagation from the primary calibration standard through transfer to the clinic for air-kerma strength is covered first. Uncertainties in each of the brachytherapy dosimetry parameters of the TG-43 formalism are then explored, ending with transfer to the clinic and recommended approaches. Dosimetric uncertainties during treatment delivery are considered briefly but are not included in the detailed analysis. For low- and high-energy brachytherapy sources of low dose rate and high dose rate, a combined dosimetric uncertainty <5% (k=1) is estimated, which is consistent with prior literature estimates. Recommendations are provided for clinical medical physicists, dosimetry investigators, and source and treatment planning system manufacturers. These recommendations include the use of the GUM and NIST reports, a requirement of constancy of manufacturer source design, dosimetry investigator guidelines, provision of the lowest uncertainty for patient treatment dosimetry, and the establishment of an action level based on dosimetric uncertainty. These recommendations reflect the guidance of the American Association of Physicists in Medicine (AAPM) and the Groupe Européen de Curiethérapie–European Society for Therapeutic Radiology and Oncology (GEC-ESTRO) for their members and may also be used as guidance to manufacturers and regulatory agencies in developing good manufacturing practices for sources used in routine clinical treatments. PMID:21452716
DeWerd, Larry A; Ibbott, Geoffrey S; Meigooni, Ali S; Mitch, Michael G; Rivard, Mark J; Stump, Kurt E; Thomadsen, Bruce R; Venselaar, Jack L M
2011-02-01
This report addresses uncertainties pertaining to brachytherapy single-source dosimetry preceding clinical use. The International Organization for Standardization (ISO) Guide to the Expression of Uncertainty in Measurement (GUM) and the National Institute of Standards and Technology (NIST) Technical Note 1297 are taken as reference standards for uncertainty formalism. Uncertainties in using detectors to measure or utilizing Monte Carlo methods to estimate brachytherapy dose distributions are provided with discussion of the components intrinsic to the overall dosimetric assessment. Uncertainties provided are based on published observations and cited when available. The uncertainty propagation from the primary calibration standard through transfer to the clinic for air-kerma strength is covered first. Uncertainties in each of the brachytherapy dosimetry parameters of the TG-43 formalism are then explored, ending with transfer to the clinic and recommended approaches. Dosimetric uncertainties during treatment delivery are considered briefly but are not included in the detailed analysis. For low- and high-energy brachytherapy sources of low dose rate and high dose rate, a combined dosimetric uncertainty <5% (k=1) is estimated, which is consistent with prior literature estimates. Recommendations are provided for clinical medical physicists, dosimetry investigators, and source and treatment planning system manufacturers. These recommendations include the use of the GUM and NIST reports, a requirement of constancy of manufacturer source design, dosimetry investigator guidelines, provision of the lowest uncertainty for patient treatment dosimetry, and the establishment of an action level based on dosimetric uncertainty. These recommendations reflect the guidance of the American Association of Physicists in Medicine (AAPM) and the Groupe Européen de Curiethérapie-European Society for Therapeutic Radiology and Oncology (GEC-ESTRO) for their members and may also be used as guidance to manufacturers and regulatory agencies in developing good manufacturing practices for sources used in routine clinical treatments.
This final report summarizes the work conducted by the Consortium of Advanced Residential Buildings (CARB) (http://www.carb-swa.com/), one of the 'Building America Energy Efficient Housing Partnership' Industry Teams, for the period January 1, 2008 to December 31, 2010. The Building America Program (BAP) is part of the Department of Energy (DOE), Energy Efficiency and Renewable Energy, Building Technologies Program (BTP). The long term goal of the BAP is to develop cost effective, production ready systems in five major climate zones that will result in zero energy homes (ZEH) that produce as much energy as they use on an annual basis bymore » 2020. CARB is led by Steven Winter Associates, Inc. with Davis Energy Group, Inc. (DEG), MaGrann Associates, and Johnson Research, LLC as team members. In partnership with our numerous builders and industry partners, work was performed in three primary areas - advanced systems research, prototype home development, and technical support for communities of high performance homes. Our advanced systems research work focuses on developing a better understanding of the installed performance of advanced technology systems when integrated in a whole-house scenario. Technology systems researched included: - High-R Wall Assemblies - Non-Ducted Air-Source Heat Pumps - Low-Load HVAC Systems - Solar Thermal Water Heating - Ventilation Systems - Cold-Climate Ground and Air Source Heat Pumps - Hot/Dry Climate Air-to-Water Heat Pump - Condensing Boilers - Evaporative condensers - Water Heating CARB continued to support several prototype home projects in the design and specification phase. These projects are located in all five program climate regions and most are targeting greater than 50% source energy savings over the Building America Benchmark home. CARB provided technical support and developed builder project case studies to be included in near-term Joule Milestone reports for the following community scale projects: - SBER Overlook at Clipper Mill (mixed, humid climate) - William Ryan Homes - Tampa (hot, humid climate).« less
Unruh, Kathryn E.; Sasson, Noah J.; Shafer, Robin L.; Whitten, Allison; Miller, Stephanie J.; Turner-Brown, Lauren; Bodfish, James W.
2016-01-01
Background: Our experiences with the world play a critical role in neural and behavioral development. Children with autism spectrum disorder (ASD) spend a disproportionate amount of time seeking out, attending to, and engaging with aspects of their environment that are largely nonsocial in nature. In this study we adapted an established method for eliciting and quantifying aspects of visual choice behavior related to preference to test the hypothesis that preference for nonsocial sources of stimulation diminishes orientation and attention to social sources of stimulation in children with ASD. Method: Preferential viewing tasks can serve as objective measures of preference, with a greater proportion of viewing time to one item indicative of increased preference. The current task used gaze-tracking technology to examine patterns of visual orientation and attention to stimulus pairs that varied in social (faces) and nonsocial content (high autism interest or low autism interest). Participants included both adolescents diagnosed with ASD and typically developing; groups were matched on IQ and gender. Results: Repeated measures ANOVA revealed that individuals with ASD had a significantly greater latency to first fixate on social images when this image was paired with a high autism interest image, compared to a low autism interest image pairing. Participants with ASD showed greater total look time to objects, while typically developing participants preferred to look at faces. Groups also differed in number and average duration of fixations to social and object images. In the ASD group only, a measure of nonsocial interest was associated with reduced preference for social images when paired with high autism interest images. Conclusions: In ASD, the presence of nonsocial sources of stimulation can significantly increase the latency of look time to social sources of information. These results suggest that atypicalities in social motivation in ASD may be context-dependent, with a greater degree of plasticity than is assumed by existing social motivation accounts of ASD. PMID:28066169
Continuing educators must consider the impact of technology on group processes, including ways in which it affects group pressures, communication patterns, and social and emotional components of learning. Administrators and faculty should integrate group process frameworks with educational technologies in order to provide effective learning…
The role of the police in Western society is undergoing a transformation that reflects the economic social and technological changes in the community and the assertion of individual rights within a democracy. The aim of this study is to evaluate level of stress among a group of French policemen and to examine the association between policing, potential stressors and stress levels. The sample is drawn from a large metropolitan police force (n=617). The population extends from the first line policeman to top senior management. Each policeman is matched for age (more or less five years) and sex, to a control. Policemen and controls complete a self administered questionnaire including demographic, occupational and health characteristics, and a stress level assessment with the help of a visual analogue scale. The average age of the two groups is 40 yr. Eighty-four percent are men. The total score for average sources is not statistically significantly different for policemen and controls. Comparison of a police group with a high stress level to a police population with a low and moderate stress level is made. The comparison is done first only with men, and second with the whole population. Policemen with a high stress level (same results only for men and the whole population) belong to the following groups: more than 15 yr service, sergeant, officer and administrative employee rank, divorced experience, age over 30, no leisure-time activities and no hobbies. Multivariate analysis shows that the two last parameters are bound to the stress level. For the whole population, age over 30 has to be added, and for the group of men, length of service over five years should be noted. Stress at work is an ill-health provoking factor. Police from minority groups such as ageing subjects or police officers have been reported to experience greater stress. This population is adversely affected by lack of available manpower and long working hours. In fact sources of stress in the police population are found both in the weariness of the job and private life planning.
The authors present their experience in the endoscopic laser photocoagulation of bleeding peptic ulcer. From 1991 to June 1995, 203 patients admitted for UGI bleeding from peptic ulcer have been treated by this method. The source of bleeding was confirmed by endoscopy. The patients were divided into two groups: actively bleeding peptic ulcer (group IA and IB according to Forrest's classification) and ulcer with stigmata of recent bleeding (group IIA/IIB). The former group consisted of 106 patients, among whom over 40 percent (45 patients) presented signs of hypovolemic shock on admission. Nd:YAG laser (Surgical Laser Technologies) was used in a continuous mode with a contact (8 - 20 watts) or non-contact (over 50 watts) method of coagulation. In actively bleeding patients photocoagulation resulted in stopping the hemorrhage in 95 (90%). Recurrent bleeding occurred in 16 cases; in 9 of them it was stopped by repeated photocoagulation. In this group 18 patients required surgical intervention. The mortality was of 10.3% (11 patients). In 97 patients with recent bleeding stigmata photocoagulation provoked heavy hemorrhage in 3 (in 2 cases stopped by prolonged coagulation). In 9 of the remaining 94 patients recurrent bleeding occurred. Nine patients required surgical intervention. Mortality in this group was of 6%.
Wileman, B W; Thomson, D U; Reinhardt, C D; Renter, D G
2009-10-01
Conventional feeding systems use pharmaceutical products not allowed in natural or organic systems for finishing cattle. This review of data compares the performance effects (ADG, G:F, DMI) of technologies used in conventional feeding programs that are prohibited in organic programs, natural programs, or both. The technologies evaluated were steroid implants, monensin, tylosin, endectocides, and metaphylaxis with any antimicrobial. For inclusion in this analysis, studies were conducted in North America, reported randomization to treatment group, used beef cattle, contained an untreated control group, and were sourced from peer-reviewed journals. Forest plots were used to examine the data visually for trends toward a uniform effect of the technology on the outcomes of interest (ADG, DMI, G:F). Technologies that displayed a uniform response on the forest plot compared with negative controls were then analyzed using mixed models. Examination of forest plots for endectocides, steroid implants, monensin, and metaphylaxis technologies appeared to show performance advantages for treated cattle relative to cattle in negative control groups. An insufficient number of studies met the inclusion criteria to conduct meta-analyses comparing endectocides, monensin, or tylosin with negative controls. Average daily gain in feeder cattle given metaphylaxis on arrival was 0.11 kg/d (P < 0.01) greater relative to cattle that did not receive metaphylaxis on arrival. Implanting heifers increased ADG by 0.08 kg/d compared with nonimplanted controls (P = 0.09). Implants had no effect on G:F (P = 0.14) in heifers or on DMI (P = 0.44) relative to nonimplanted control heifers. Implanting steers was associated with greater ADG, by 0.25 kg/d (P < 0.01), and DMI, by 0.53 kg/d (P < 0.01), relative to nonimplanted control steers. Implants also improved G:F in steers relative to nonimplanted steers, by 0.02 (0.17 vs. 0.15; implanted vs. controls, P < 0.01; n = 21 studies). When average estimated differences in ADG and G:F for implanted and nonimplanted steers were incorporated into a breakeven model, implanted steers had a $77/animal lower cost of production than nonimplanted steers and a $349/animal lower cost of production than organically raised steers. These data illustrate the importance of capturing premiums when operating natural and organic production systems to maintain economic viability.
Advances in x-ray imaging technology and x-ray sources are such that a new technology can be brought to commercialization enabling the three-dimensional (3-D) microvisualization of hydrated biological specimens. The Company is engaged in a program whose main goal is the development of a new technology for direct three dimensional (3-D) x-ray holographic imaging. It is believed that this technology will have a wide range of important applications in the defense, medical, and scientific sectors. For example, in the medical area, it is expected that biomedical science will constitute a very active and substantial market, because the application of physical technologies for the direct visualization of biological entities has had a long and extremely fruitful history.
Hu, Hongqiang; Boardman, Richard Doin; Wright, Christopher Todd
P&G intends to replace as much as their current heat and power by renewable energy sources. For 2014, P&G’s total energy including electricity, natural gas and steam is approximately 1,540,000 MMBTU annually (Table 2). The biomass and wastes around P&G facility can be grouped into six categories (Figure 6): (1) Agriculture residue and grass, (2) Refuse (inorganic) solid material, (3) Food waste, (4) Organic waste stream, (5) livestock manure, (6) wastewater and sludge. The six feedstock sources can provide a total energy of 3,520,000 MMBTU per year (Table 10), among which the agriculture residue is the biggest fraction, about 67%,more » followed by livestock manures 27%. Therefore, the available energy sources around P&G facility are enough to meet their energy needs. These energy feedstocks would be treated by two processes: anaerobic digestion for biogas subsequently for heat and power and thermochemical process (combustion, pyrolysis and gasification) for heat and power (Figure 8 and 9). For AD, a one-stage complete mixing digester is preferable; and fluidized bed reactors are favorable for thermochemical process.« less
The Environmental Technology Verification report discusses the technology and performance of the Fuel-Borne Catalyst with CleanAir System's Diesel Oxidation Catalyst manufactured by Clean Diesel Technologies, Inc. The technology is a fuel-borne catalyst used in ultra low sulfur d...
This document was developed by the Arrowhead Center of New Mexico State University as part of the National Security Preparedness Project (NSPP), funded by a DOE/NNSA grant. The NSPP has three primary components: business incubation, workforce development, and technology demonstration and validation. The document contains a survey of test and demonstration assets in New Mexico available for external users such as small businesses with security technologies under development. Demonstration and validation of national security technologies created by incubator sources, as well as other sources, are critical phases of technology development. The NSPP will support the utilization of an integrated demonstrationmore » and validation environment.« less
Hain, Roger; Allen, Christopher E.; Anderson, Craig S.; Budynkiewicz, Jamie A.; Burke, Douglas; Chen, Judy C.; Civano, Francesca Maria; D'Abrusco, Raffaele; Doe, Stephen M.; Evans, Ian N.; Evans, Janet D.; Fabbiano, Giuseppina; Gibbs, Danny G., II; Glotfelty, Kenny J.; Graessle, Dale E.; Grier, John D.; Hall, Diane M.; Harbo, Peter N.; Houck, John C.; Lauer, Jennifer L.; Laurino, Omar; Lee, Nicholas P.; Martínez-Galarza, Juan Rafael; McCollough, Michael L.; McDowell, Jonathan C.; Miller, Joseph; McLaughlin, Warren; Morgan, Douglas L.; Mossman, Amy E.; Nguyen, Dan T.; Nichols, Joy S.; Nowak, Michael A.; Paxson, Charles; Plummer, David A.; Primini, Francis Anthony; Rots, Arnold H.; Siemiginowska, Aneta; Sundheim, Beth A.; Tibbetts, Michael; Van Stone, David W.; Zografou, Panagoula
2018-01-01
The Second Chandra Source Catalog (CSC2.0) combines data at multiple stages to improve detection efficiency, enhance source region identification, and match observations of the same celestial source taken with significantly different point spread functions on Chandra's detectors. The need to group data for different reasons at different times in processing results in a hierarchy of groups to which individual sources belong. Source data are initially identified as belonging to each Chandra observation ID and number (an "obsid"). Data from each obsid whose pointings are within sixty arcseconds of each other are reprojected to the same aspect reference coordinates and grouped into stacks. Detection is performed on all data in the same stack, and individual sources are identified. Finer source position and region data are determined by further processing sources whose photons may be commingled together, grouping such sources into bundles. Individual stacks which overlap to any extent are grouped into ensembles, and all stacks in the same ensemble are later processed together to identify master sources and determine their properties.We discuss the basis for the various methods of combining data for processing and precisely define how the groups are determined. We also investigate some of the issues related to grouping data and discuss what options exist and how groups have evolved from prior releases.This work has been supported by NASA under contract NAS 8-03060 to the Smithsonian Astrophysical Observatory for operation of the Chandra X-ray Center.
Quan, Justin; Ortiz, David M; Bousvaros, Athos; Ilowite, Norman T; Inman, Christi J; Marsolo, Keith; McMurry, Andrew J; Sandborg, Christy I; Schanberg, Laura E; Wallace, Carol A; Warren, Robert W; Weber, Griffin M; Mandl, Kenneth D
2013-01-01
Objective Registries are a well-established mechanism for obtaining high quality, disease-specific data, but are often highly project-specific in their design, implementation, and policies for data use. In contrast to the conventional model of centralized data contribution, warehousing, and control, we design a self-scaling registry technology for collaborative data sharing, based upon the widely adopted Integrating Biology & the Bedside (i2b2) data warehousing framework and the Shared Health Research Information Network (SHRINE) peer-to-peer networking software. Materials and methods Focusing our design around creation of a scalable solution for collaboration within multi-site disease registries, we leverage the i2b2 and SHRINE open source software to create a modular, ontology-based, federated infrastructure that provides research investigators full ownership and access to their contributed data while supporting permissioned yet robust data sharing. We accomplish these objectives via web services supporting peer-group overlays, group-aware data aggregation, and administrative functions. Results The 56-site Childhood Arthritis & Rheumatology Research Alliance (CARRA) Registry and 3-site Harvard Inflammatory Bowel Diseases Longitudinal Data Repository now utilize i2b2 self-scaling registry technology (i2b2-SSR). This platform, extensible to federation of multiple projects within and between research networks, encompasses >6000 subjects at sites throughout the USA. Discussion We utilize the i2b2-SSR platform to minimize technical barriers to collaboration while enabling fine-grained control over data sharing. Conclusions The implementation of i2b2-SSR for the multi-site, multi-stakeholder CARRA Registry has established a digital infrastructure for community-driven research data sharing in pediatric rheumatology in the USA. We envision i2b2-SSR as a scalable, reusable solution facilitating interdisciplinary research across diseases. PMID:22733975
Palacios, D. M.; Follett, T.; Winsor, M.; Mate, B. R.
2016-02-01
The Oregon State University Marine Mammal Institute (MMI) comprises five research laboratories, each with specific research objectives, technological approaches, and data requirements. Among the types of data under management are individual photo-ID and field observations, telemetry (e.g., locations, dive characteristics, temperature, acoustics), genetics (and relatedness), stable isotope and toxicology assays, and remotely sensed environmental data. Coordinating data management that facilitates collaboration and comparative exploration among different researchers has been a longstanding challenge for our groups as well as for the greater wildlife research community. Research data are commonly stored locally in flat files or spreadsheets, with copies made and analyses performed with various packages without any common standards for interoperability, becoming a potential source of error. Database design, where it exists, is frequently arrived at ad-hoc. New types of data are generally tacked on when technological advances present them. A data management solution that can address these issues should meet the following requirements: be scalable, modular (i.e., able to incorporate new types of data as they arise), incorporate spatiotemporal dimensions, and be compliant with existing data standards such as DarwinCore. The MMI has developed a data architecture that allows the incorporation of any type of animal-associated data into a modular and portable format that can be integrated with any other dataset sharing the core format. It allows browsing, querying and visualization across any of the attributes that can be associated with individual animals, groups, sensors, or environmental datasets. We have implemented this architecture in an open-source geo-enabled relational database system (PostgreSQL, PostGIS), and have designed a suite of software tools (Python, R) to load, preprocess, visualize, analyze, and export data. This architecture could benefit organizations with similar data challenges.
Natter, Marc D; Quan, Justin; Ortiz, David M; Bousvaros, Athos; Ilowite, Norman T; Inman, Christi J; Marsolo, Keith; McMurry, Andrew J; Sandborg, Christy I; Schanberg, Laura E; Wallace, Carol A; Warren, Robert W; Weber, Griffin M; Mandl, Kenneth D
2013-01-01
Registries are a well-established mechanism for obtaining high quality, disease-specific data, but are often highly project-specific in their design, implementation, and policies for data use. In contrast to the conventional model of centralized data contribution, warehousing, and control, we design a self-scaling registry technology for collaborative data sharing, based upon the widely adopted Integrating Biology & the Bedside (i2b2) data warehousing framework and the Shared Health Research Information Network (SHRINE) peer-to-peer networking software. Focusing our design around creation of a scalable solution for collaboration within multi-site disease registries, we leverage the i2b2 and SHRINE open source software to create a modular, ontology-based, federated infrastructure that provides research investigators full ownership and access to their contributed data while supporting permissioned yet robust data sharing. We accomplish these objectives via web services supporting peer-group overlays, group-aware data aggregation, and administrative functions. The 56-site Childhood Arthritis & Rheumatology Research Alliance (CARRA) Registry and 3-site Harvard Inflammatory Bowel Diseases Longitudinal Data Repository now utilize i2b2 self-scaling registry technology (i2b2-SSR). This platform, extensible to federation of multiple projects within and between research networks, encompasses >6000 subjects at sites throughout the USA. We utilize the i2b2-SSR platform to minimize technical barriers to collaboration while enabling fine-grained control over data sharing. The implementation of i2b2-SSR for the multi-site, multi-stakeholder CARRA Registry has established a digital infrastructure for community-driven research data sharing in pediatric rheumatology in the USA. We envision i2b2-SSR as a scalable, reusable solution facilitating interdisciplinary research across diseases.
... application of the best available technology economically achievable (BAT). 434.73 Section 434.73 Protection... (CONTINUED) COAL MINING POINT SOURCE CATEGORY BPT, BAT, BCT LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS... economically achievable (BAT). Except as provided in 40 CFR 125.30 through 125.32 and 434.72(b)(2), a pre...
... application of the best available technology economically achievable (BAT). 434.73 Section 434.73 Protection... (CONTINUED) COAL MINING POINT SOURCE CATEGORY BPT, BAT, BCT LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS... economically achievable (BAT). Except as provided in 40 CFR 125.30 through 125.32 and 434.72(b)(2), a pre...
... application of the best available technology economically achievable (BAT). 434.73 Section 434.73 Protection... MINING POINT SOURCE CATEGORY BPT, BAT, BCT LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS Coal Remining... achievable (BAT). Except as provided in 40 CFR 125.30 through 125.32 and 434.72(b)(2), a pre-existing...
... application of the best available technology economically achievable (BAT). 434.73 Section 434.73 Protection... (CONTINUED) COAL MINING POINT SOURCE CATEGORY BPT, BAT, BCT LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS... economically achievable (BAT). Except as provided in 40 CFR 125.30 through 125.32 and 434.72(b)(2), a pre...
... application of the best available technology economically achievable (BAT). 434.73 Section 434.73 Protection... MINING POINT SOURCE CATEGORY BPT, BAT, BCT LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS Coal Remining... achievable (BAT). Except as provided in 40 CFR 125.30 through 125.32 and 434.72(b)(2), a pre-existing...
National Coordination Office for Information Technology Research and Development, Arlington, VA.
This is part of a series of reports to the President and Congress developed by the President's Information Technology Advisory Committee (PITAC) on key contemporary issues in information technology. This report defines open source software, explains PITAC's interest in this model, describes the process used to investigate issues in open source…
In this study, social, literary and technological sources used by classroom teachers in social studies courses are analyzed in terms of frequency. The study employs mixed methods research and is designed following the convergent parallel design. In the qualitative part of the study, phenomenological method was used and in the quantitative…
Bolt, Daniel M.; Ysseldyke, Jim; Patterson, Michael J.
2010-01-01
A three-level variance decomposition analysis was used to examine the sources of variability in implementation of a technology-enhanced progress monitoring system within each year of a 2-year study using a randomized-controlled design. We show that results of technology-enhanced progress monitoring are not necessarily a measure of student…
Sheet music, song lyrics, and audio recordings may not be the first primary sources that come to mind when considering ways to teach about changes brought about by technology during westward expansion, but these sources engage students in thought provoking ways. In this article the author presents a 1917 photograph of Mountain Chief, of the Piegan…
... for the purpose of evaluating system performance, testing new technology or control technologies... evaluating system performance, testing new technology or control technologies, diagnostic testing, or related... (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of...
Diabetes prevalence in Scotland is 5.3%, with type 2 diabetes accounting for 86.7% of all cases in the National Health Service Highlands health board area and 85.7% in the Western Isles. Structured education is a key component in the management of this chronic disease. However, current group session models are less feasible in lower-population non-urban environments due to distance, participant numbers and access to appropriately trained healthcare professionals. Group sessions may also be a less attractive option in small communities, where people tend to have close day-to-day personal contact. This study assesses the access and delivery preferences of remote and rural service users in the Highlands and Western Isles to structured diabetes education programs. The study used a mixed methods approach of focus groups and questionnaires with people with type 2 diabetes in the Highlands and Islands of Scotland. Both modes of participation were designed to explore perception of diabetes knowledge, diabetes education and use of technology. One-to-one delivery was the delivery method of choice; however, there was a preference for a digital approach over group education sessions. Service users expressed a strong desire to be able to learn at their own pace, when and where they wanted to, and with no requirement to travel. To address these requirements an online resource, providing access to both learning sessions and trusted sources of information, was the preferred mode of delivery. People with type 2 diabetes living in remote and rural areas of the Scottish Highlands and Islands who already use the internet are receptive to the use of digital technology for delivery of diabetes education and are interested in learning more about management of their condition through this medium. They believe that a technology approach will provide them with more control over the pace of learning, and where and when this learning can take place.
Technology (IT) MEL/ITL Task Group on Metrology for Information Technology (IT) U.S. DEPARTMENT OF COMMERCE Technology Administration National Institute of...NIST management requested a white paper on metrology for information technology (IT). A task group was formed to develop this white paper with...representatives from the Manufacturing Engineering Laboratory (MEL), the Information Technology Laboratory (ITL), and Technology Services (TS). The task
This article aims to analyze the patents registered in the nursing area, since these patents may be used as an indicator of the technological development in the area. It presents and discusses national technological productions, tracked through the "nursing" keyword, patented in the period from 1990-2009. This is a retrospective documental research, using, as a source, data from the National Industrial Property Institute (INPI). The information gathered is discussed in relation to the appropriation of the technologies, the incentive to develop them and register them as a source of knowledge in the nursing field, aiming the practice of care. Light and light hard technology productions are increasing in the nursing field. However, these are not registered and patented. The technological advance in the nursing field is emergent and needs policies for its development.
The document presents the technical rationale for best conventional technology (BCI) effluent limitations guidelines for the pharmaceutical manufacturing point-source category as required by the Clean Water Act of 1977 (P.L. 95-217, the Act). The document describes the technologies considered as the bases for BCT limitations. Section II of this document summarizes the rulemaking process. Sections III through V describe the technical data and engineering analyses used to develop the regulatory technology options. The costs and removals associated with each technology option for each plant and the application of the BCT cost test methodology are presented in Section VI. BCI limitationsmore » bases on the best conventional pollutant control technology are to be achieved by existing direct-discharging facilities.« less
... transfer of technology. No technology is transferred to a national of a destination in Country Group E:1... destination in Country Group E:1 (see supplement No. 1 to this part); (vi) Technology is not transferred to a... destination in Country Group E:1 (see supplement No. 1 to this part); (vi) Technology is not transferred to a...
It has been 38 years since the most likely artificial transmission ever recorded from a possible extraterrestrial source was received [1, 2]. Using greatly improved technology, subsequent efforts by the Search for Extraterrestrial Intelligence (SETI) have continued, yet silence from space prevails [3]. This article examines whether the transmission was an artificial signal, and if so why it matters, to include the possibility that the modest technology used by the "Big Ear" receiver could have been accommodated by the source. The transmission and the ensuing long silence may be intended. This paper reconsiders the Drake equation, an estimate for the number of civilizations in our galaxy that may possess technology for interstellar signaling [4, 5], and shows that statement of the current alleged best estimate of two civilizations is not supported [6]. An alternate and original method suggests ~100 civilizations. It importantly relies on experience and detectable events, including recent astronomical evidence about exoplanets as cataloged by the European Exoplanet program and by the National Aeronautics and Space Administration (NASA) Exoplanet Science Institute [7, 8]. In addition it addresses major geological and astronomical occurrences that profoundly affected development of life on Earth and might apply similarly for Extraterrestrial Intelligence (ETI). The alternate approach is not intended to compute ETI precisely but to examine the possibility that, though vastly spread, it likely exists. The discussion anticipates difficulties in communication with an alien civilization, hardly an exercise in science fiction, and explores how international groups can participate in future specific response. One response might be to monitor the electromagnetic radiation spectral line of an element to be determined by consensus.
Asaji, T., E-mail: asaji@oshima-k.ac.jp; Hirabara, N.; Izumihara, T.
A new electron cyclotron resonance ion/plasma source has been designed and will be built at Oshima National College of Maritime Technology by early 2014. We have developed an ion source that allows the control of the plasma parameters over a wide range of electron temperatures for material research. A minimum-B magnetic field composed of axial mirror fields and radial cusp fields was designed using mainly Nd-Fe-B permanent magnets. The axial magnetic field can be varied by three solenoid coils. The apparatus has 2.45 GHz magnetron and 2.5–6.0 GHz solid-state microwave sources.
This document describes the residual risk assessment for the Ethylene Oxide Commercial Sterilization source category. For stationary sources, section 112 (f) of the Clean Air Act requires EPA to assess risks to human health and the environment following implementation of technology-based control standards. If these technology-based control standards do not provide an ample margin of safety, then EPA is required to promulgate addtional standards. This document describes the methodology and results of the residual risk assessment performed for the Ethylene Oxide Commercial Sterilization source category. The results of this analyiss will assist EPA in determining whether a residual risk rule for this source category is appropriate.
The objective of this study was to obtain three-dimensional (3D) images and to perform biomechanical simulations starting from DICOM images obtained by computed tomography (CT). Open source software were used to prepare digitized 2D images of tissue sections and to create 3D reconstruction from the segmented structures. Finally, 3D images were used in open source software in order to perform biomechanic simulations. This study demonstrates the applicability and feasibility of open source software developed in our days for the 3D reconstruction and biomechanic simulation. The use of open source software may improve the efficiency of investments in imaging technologies and in CAD/CAM technologies for implants and prosthesis fabrication which need expensive specialized software.
Single photons are a fundamental element of most quantum optical technologies. The ideal single-photon source is an on-demand, deterministic, single-photon source delivering light pulses in a well-defined polarization and spatiotemporal mode, and containing exactly one photon. In addition, for many applications, there is a quantum advantage if the single photons are indistinguishable in all their degrees of freedom. Single-photon sources based on parametric down-conversion are currently used, and while excellent in many ways, scaling to large quantum optical systems remains challenging. In 2000, semiconductor quantum dots were shown to emit single photons, opening a path towards integrated single-photon sources. Here, we review the progress achieved in the past few years, and discuss remaining challenges. The latest quantum dot-based single-photon sources are edging closer to the ideal single-photon source, and have opened new possibilities for quantum technologies.
The purpose of this study was to investigate factors that influence teacher educators' technology decisions in methods courses. Research has shown various reasons why teachers use different types of technologies and not able to integrate certain technologies. However, this study focused on the source of teachers' instructional technology…
Provides an introduction to fulfilling the information needs of technology transfer. Highlights include a definition of technology transfer; government and university involvement; industry's role; publishers; an annotated list of information sources and contacts; technology assessment, including patent searching, competitive intelligence, and…
In the past five years, a multitude of new inspection technologies have emerged as viable sources of pipeline condition data. Furthermore, many of these new technologies provide quantitative (versus qualitative) data that can significantly improve diagnostic and predictive capab...
Vanderveen, Kimberly A; Paterniti, Debora A; Kravitz, Richard L; Bold, Richard J
2007-05-01
Understanding how physicians acquire and adopt new technologies for cancer diagnosis and treatment is poorly understood, yet is critical to the dissemination of evidence-based practices. Sentinel lymph node biopsy (SLNB) has recently become a standard technique for axillary staging in early breast cancer and is an ideal platform for studying medical technology diffusion. We sought to describe the timing of SLNB adoption and patterns of surgeon interactions with the following educational sources: local university training program, surgical literature, national meetings/courses, national specialty centers, and other local surgeons. A cross-sectional survey that used semistructured interviews was used to assess timing of adoption, practice patterns, and learning sources for SLNB among surgical oncologists and general surgeons in a single metropolitan area. A total of 44 eligible surgeons were identified; 38 (86%) participated. All surgical oncologists (11 of 11) and most general surgeons (26 of 27) had implemented SLNB. Surgical oncologists were older (mean 51 vs. 48 years, P = .02) and had used SLNB longer (6.1 vs. 3.3 years, P = .01) than general surgeons. By use of social network diagrams, surgical oncologists and the university training program were shown to be key intermediaries between general surgeons and national specialty centers. Surgeons in group practice tended to use more learning sources than solo practitioners. Surgical oncologists and university-based surgeons play key educational roles in disseminating new cancer treatments and therefore have a professional responsibility to educate other community physicians to increase the use of the most current, evidence-based practices.
This report summarizes the results of a field demonstration conducted under the SITE program. The technology which was demonstrated was a solvent extraction technology developed by Terra-Kleen Response Group. Inc. to remove organic contaminants from soil. The technology employs...
To describe experiences, lessons and the implications related to the use of conferencing technology to support three drug policy research groups within a three-year period, using the action case research method. An action case research field study was executed. Three different drug policy groups participated: research, educator, and decision-maker task groups. There were a total of 61 participants in the study. The study was conducted between 2004 and 2007. Each group used audio-teleconferencing, web-conferencing or both to support their knowledge exchange activities. Data were collected over three years and consisted of observation notes, interviews, and meeting transcripts. Content analysis was used to analyze the data using NIVIO qualitative data analysis software. The study found six key lessons regarding the impact of conferencing technologies on knowledge exchange within drug policy groups. We found that 1) groups adapt to technology to facilitate group communication, 2) web-conferencing communication is optimal under certain conditions, 3) audio conferencing is convenient, 4) web-conferencing forces group interactions to be "within text", 5) facilitation contributes to successful knowledge exchange, and 6) technology impacts information sharing. This study highlights lessons related to the use of conferencing technologies to support distant knowledge exchange within drug policy groups. Key lessons from this study can be used by drug policy groups to support successful knowledge exchange activities using conferencing technologies. 2010 Elsevier Ireland Ltd. All rights reserved.
We describe the architecture of the Patient Centered Outcomes Research Institute (PCORI) funded Scalable Collaborative Infrastructure for a Learning Healthcare System (SCILHS, http://www.SCILHS.org) clinical data research network, which leverages the $48 billion dollar federal investment in health information technology (IT) to enable a queryable semantic data model across 10 health systems covering more than 8 million patients, plugging universally into the point of care, generating evidence and discovery, and thereby enabling clinician and patient participation in research during the patient encounter. Central to the success of SCILHS is development of innovative 'apps' to improve PCOR research methods and capacitate point of care functions such as consent, enrollment, randomization, and outreach for patient-reported outcomes. SCILHS adapts and extends an existing national research network formed on an advanced IT infrastructure built with open source, free, modular components. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
The frequency of cassava consumption was investigated among three groups of people representing students from traditional and nontraditional cassava-consuming environments and cassava processors. Of these, 64% of the students at Obafemi Awolowo University, Ile-Ife, 38% of those at the Federal University of Technology, Akure, and 44% of the cassava processors consumed cassava products at least once a day, while 4, 35, and 28% of the groups, respectively, were moderate consumers (4-6 times a week). The serum thiocyanate level of the processors was significantly higher (0.57 mg/dl) than those of the students (0.38 mg/dl), but there was no significant difference in the urinary thiocyanate level of the three groups. Analysis of cassava and its intermediate and final products for free cyanide, acetone cyanohydrin, and intact glucosides during the production of such cassava products as gari, fufu, and lafun revealed that while the finished products might be safe for human consumption, the workers were probably exposed at different stages of processing to nondietary sources of cyanide.
As the Mobile Ad Hoc Networks technologies face a series of challenges like dynamic changes of topological structure, existence of unidirectional channel, limited wireless transmission bandwidth, the capability limitations of mobile termination and etc, therefore, the research to mobile Ad Hoc network routings inevitablely undertake a more important task than those to other networks. Multicast is a mode of communication transmission oriented to group computing, which sends the data to a group of host computers by using single source address. In a typical mobile Ad Hoc Network environment, multicast has a significant meaning. On the one hand, the users of mobile Ad Hoc Network usually need to form collaborative working groups; on the other hand, this is also an important means of fully using the broadcast performances of wireless communication and effectively using the limited wireless channel resources. This paper summarizes and comparatively analyzes the routing mechanisms of various existing multicast routing protocols according to the characteristics of mobile Ad Hoc network.
In this study, fluorescent nitrogen-doped carbon dots (NCDs) were tuned via varying the sources with different number of carboxyl groups. Owing to the interaction between amino and carboxyl, more amino groups conjugate the surface of the NCDs by the source with more carboxyl groups. Fluorescent NCDs were tuned via varying the sources with different content of carboxyl groups. Correspondingly, the nitrogen content, fluorescence quantum yields and lifetime of NCDs increases with the content of carboxyl groups from the source. Furthermore, cytotoxicity assay and cell imaging test indicate that the resultant NCDs possess low cytotoxicity and excellent biocompatibility.
... technology and software to destinations in Country Group D:1. 770.3 Section 770.3 Commerce and Foreign Trade... technology and software to destinations in Country Group D:1. (a) Introduction. This section is intended to provide you additional guidance on how to determine whether your technology or software would be eligible...
... technology and software to destinations in Country Group D:1. 770.3 Section 770.3 Commerce and Foreign Trade... technology and software to destinations in Country Group D:1. (a) Introduction. This section is intended to provide you additional guidance on how to determine whether your technology or software would be eligible...
... technology and software to destinations in Country Group D:1. 770.3 Section 770.3 Commerce and Foreign Trade... technology and software to destinations in Country Group D:1. (a) Introduction. This section is intended to provide you additional guidance on how to determine whether your technology or software would be eligible...
... technology and software to destinations in Country Group D:1. 770.3 Section 770.3 Commerce and Foreign Trade... technology and software to destinations in Country Group D:1. (a) Introduction. This section is intended to provide you additional guidance on how to determine whether your technology or software would be eligible...
... technology and software to destinations in Country Group D:1. 770.3 Section 770.3 Commerce and Foreign Trade... technology and software to destinations in Country Group D:1. (a) Introduction. This section is intended to provide you additional guidance on how to determine whether your technology or software would be eligible...
Purpose: The purpose of this study was to examine the key considerations of community, scalability, supportability, security, and functionality for selecting open-source software in California universities as perceived by technology leaders. Methods: After a review of the cogent literature, the key conceptual framework categories were identified…
Background Web-based medical service (WBMS), a cooperative relationship between medical service and Internet technology, has been called one of the most innovative services of the 21st century. However, its business promotion and implementation in the medical industry have neither been expected nor executed. Few studies have explored this phenomenon from the viewpoint of inexperienced patients. Objective The primary goal of this study was to explore whether technology attractiveness, medical creditability, and diversified medical information sources could increase users’ behavior intention. Methods This study explored the effectiveness of web-based medical service by using three situations to manipulate sources of medical information. A total of 150 questionnaires were collected from people who had never used WBMS before. Hierarchical regression was used to examine the mediation and moderated-mediation effects. Results Perceived ease of use (P=.002) and perceived usefulness (P=.001) significantly enhance behavior intentions. Medical credibility is a mediator (P=.03), but the relationship does not significantly differ under diverse manipulative information channels (P=.39). Conclusions Medical credibility could explain the extra variation between technology attractiveness and behavior intention, but not significant under different moderating effect of medical information sources. PMID:28768608
Gove, Benedict; Williams, Leah J.; Beresford, Alison E.; Roddis, Philippa; Campbell, Colin; Teuten, Emma; Langston, Rowena H. W.; Bradbury, Richard B.
2016-01-01
Renewable energy will potentially make an important contribution towards the dual aims of meeting carbon emission reduction targets and future energy demand. However, some technologies have considerable potential to impact on the biodiversity of the environments in which they are placed. In this study, an assessment was undertaken of the realistic deployment potential of a range of renewable energy technologies in the UK, considering constraints imposed by biodiversity conservation priorities. We focused on those energy sources that have the potential to make important energy contributions but which might conflict with biodiversity conservation objectives. These included field-scale solar, bioenergy crops, wind energy (both onshore and offshore), wave and tidal stream energy. The spatially-explicit analysis considered the potential opportunity available for each technology, at various levels of ecological risk. The resultant maps highlight the energy resource available, physical and policy constraints to deployment, and ecological sensitivity (based on the distribution of protected areas and sensitive species). If the technologies are restricted to areas which currently appear not to have significant ecological constraints, the total potential energy output from these energy sources was estimated to be in the region of 5,547 TWh/yr. This would be sufficient to meet projected energy demand in the UK, and help to achieve carbon reduction targets. However, we highlight two important caveats. First, further ecological monitoring and surveillance is required to improve understanding of wildlife distributions and therefore potential impacts of utilising these energy sources. This is likely to reduce the total energy available, especially at sea. Second, some of the technologies under investigation are currently not deployed commercially. Consequently this potential energy will only be available if continued effort is put into developing these energy sources/technologies, to enable realisation of their full potential. PMID:27224050
Gove, Benedict; Williams, Leah J; Beresford, Alison E; Roddis, Philippa; Campbell, Colin; Teuten, Emma; Langston, Rowena H W; Bradbury, Richard B
2016-01-01
Renewable energy will potentially make an important contribution towards the dual aims of meeting carbon emission reduction targets and future energy demand. However, some technologies have considerable potential to impact on the biodiversity of the environments in which they are placed. In this study, an assessment was undertaken of the realistic deployment potential of a range of renewable energy technologies in the UK, considering constraints imposed by biodiversity conservation priorities. We focused on those energy sources that have the potential to make important energy contributions but which might conflict with biodiversity conservation objectives. These included field-scale solar, bioenergy crops, wind energy (both onshore and offshore), wave and tidal stream energy. The spatially-explicit analysis considered the potential opportunity available for each technology, at various levels of ecological risk. The resultant maps highlight the energy resource available, physical and policy constraints to deployment, and ecological sensitivity (based on the distribution of protected areas and sensitive species). If the technologies are restricted to areas which currently appear not to have significant ecological constraints, the total potential energy output from these energy sources was estimated to be in the region of 5,547 TWh/yr. This would be sufficient to meet projected energy demand in the UK, and help to achieve carbon reduction targets. However, we highlight two important caveats. First, further ecological monitoring and surveillance is required to improve understanding of wildlife distributions and therefore potential impacts of utilising these energy sources. This is likely to reduce the total energy available, especially at sea. Second, some of the technologies under investigation are currently not deployed commercially. Consequently this potential energy will only be available if continued effort is put into developing these energy sources/technologies, to enable realisation of their full potential.
These Technology Activity Modules are designed to serve as an implementation resource for technology education teachers as they integrate technology education with Missouri's Academic Performance Standards and provide a source of activities and activity ideas that can be used to integrate and reinforce learning across the curriculum. The modules…
This final report will cover work performed over the period of November 11, 2005 to September 30, 2006 on the contract to develop technologies using laser sources for radiation effects sciences. The report will discuss four topic areas; the laser source experiments on the Gekko Laser at Osaka, Japan, planning for the Charge State Freeze Out experiments to be performed in calendar year 2007, a review of previous xenon gasbags on the LANL Trident laser to provide planning support to the May-June 2007 HELEN experiments.
Today, the increased consumption of energy in world, in addition to the risk of quick exhaustion of fossil resources, has forced industrial firms and organizations to utilize energy technology portfolio management tools viewed both as a process of diversification of energy sources and optimal use of available energy sources. Furthermore, the rapid development of technologies, their increasing complexity and variety, and market dynamics have made the task of technology portfolio selection difficult. Considering high level of competitiveness, organizations need to strategically allocate their limited resources to the best subset of possible candidates. This paper presents the results of developing a mathematical model for energy technology portfolio selection at a R&D center maximizing support of the organization's strategy and values. The model balances the cost and benefit of the entire portfolio.
Pop-Vadean, A.; Pop, P. P.; Latinovic, T.; Barz, C.; Lung, C.
2017-05-01
Harvesting energy from nonconventional sources in the environment has received increased attention over the past decade from researchers who study these alternative energy sources for low power applications. Although that energy harvested is small and in the order of milliwatt, it can provide enough power for wireless sensors and other low-power applications. In the environment there is a lot of wasted energy that can be converted into electricity to power the various circuits and represents a potentially cheap source of power. Energy harvesting is important because it offers an alternative power supply for electronic devices where is does not exist conventional energy sources. This technology applied in a wireless sensor network (WSN) and devices on the IoT, will eliminate the need for network-based energy and conventional batteries, will minimize maintenance costs, eliminate cables and batteries and is ecological. It has the same advantage in applications from remote locations, underwater, and other hard to reach places where conventional batteries and energy are not suitable. Energy harvesting will promote environmentally friendly technologies that will save energy, will reduce CO2 emissions, which makes this technology indispensable for achieving next-generation smart cities and sustainable society. In response to the challenges of energy, in this article we remind the basics of harvesting energy and we discuss the various applications of this technology where traditional batteries cannot be used.
DeBell, T. C.; Udell, C.; Kwon, M.; Selker, J. S.; Lopez Alcala, J. M.
2017-12-01
Methods and technologies facilitating internet connectivity and near-real-time status updates for in site environmental sensor data are of increasing interest in Earth Science. However, Open Source, Do-It-Yourself technologies that enable plug and play functionality for web-connected sensors and devices remain largely inaccessible for typical researchers in our community. The Openly Published Environmental Sensing Lab at Oregon State University (OPEnS Lab) constructed an Open Source 900 MHz Long Range Radio (LoRa) receiver hub with SD card data logger, Ethernet and Wi-Fi shield, and 3D printed enclosure that dynamically uploads transmissions from multiple wirelessly-connected environmental sensing devices. Data transmissions may be received from devices up to 20km away. The hub time-stamps, saves to SD card, and uploads all transmissions to a Google Drive spreadsheet to be accessed in near-real-time by researchers and GeoVisualization applications (such as Arc GIS) for access, visualization, and analysis. This research expands the possibilities of scientific observation of our Earth, transforming the technology, methods, and culture by combining open-source development and cutting edge technology. This poster details our methods and evaluates the application of using 3D printing, Arduino Integrated Development Environment (IDE), Adafruit's Open-Hardware Feather development boards, and the WIZNET5500 Ethernet shield for designing this open-source, general purpose LoRa to Wi-Fi data logger.
At first glance the story of the Intense Pulsed Neutron Source (IPNS), an accelerator-driven neutron source for exploring the structure of materials through neutron scattering, seems to be one of puzzling ups and downs. For example, Argonne management, Department of Energy officials, and materials science reviewers continued to offer, then withdraw, votes of confidence even though the middling-sized IPNS produced high-profile research, including work that made the cover of Nature in 1987. In the midst of this period of shifting opinion and impressive research results, some Argonne materials scientists were unenthusiastic, members of the laboratory's energy physics group were keymore » supporters, and materials scientists at another laboratory provided, almost fortuitously, a new lease on life. What forces shaped the puzzling life cycle of the IPNS? And what role - if any - did the moderate price tag and the development of scientific and technological ideas play in the course it took? To answer these questions this paper looks to an ecosystem metaphor for inspiration, exploring how opinions, ideas, and machinery emerged from the interrelated resource economies of Argonne, the DOE, and the materials science community by way of a tangled web of shifting group interactions. The paper will conclude with reflections about what the resulting focus on relationality explains about the IPNS story as well as the underlying dynamic that animates knowledge production at U.S. national laboratories.« less
... negative determination regarding the eligibility of workers and former workers of MetLife, Technology, Operations, and Information Technology Groups, Moosic, Pennsylvania (TA-W-73,210) and MetLife, Technology... software testing and quality assurance services, and are not separately identifiable by service supplied...
Quantum photonics has recently attracted a lot of attention for its disruptive potential in emerging technologies like quantum cryptography, quantum communication and quantum computing. Driven by the impressive development in nanofabrication technologies and nanoscale engineering, silicon photonics has rapidly become the platform of choice for on-chip integration of high performing photonic devices, now extending their functionalities towards quantum-based applications. Focusing on quantum Information Technology (qIT) as a key application area, we review recent progress in integrated silicon-based sources of nonclassical states of light. We assess the state of the art in this growing field and highlight the challenges that need to be overcome to make quantum photonics a reliable and widespread technology.
In this paper, issues in Internet recruitment of ethnic minorities in the US are explored through an analysis of an Internet survey study. The issues include those related to: (a) the difficulties in ensuring authenticity; (b) a lack of cooperation by gate keepers; (c) the flexibility required in the recruitment process; (d) a very low response rate; and (e) selected groups of ethnic minorities. Based on the discussions on the issues, we propose regular updates of knowledge and skills related to Internet interactions and technologies, usage of multiple recruitment sources, pluralistic recruitment approaches, and a quota sampling method.
Zaitzeff, J. B. (Editor); Cornillon, P. (Editor); Aubrey, D. A. (Editor)
1980-01-01
Presentations were grouped in the following categories: (1) a technical orientation of Earth resources remote sensing including data sources and processing; (2) a review of the present status of remote sensing technology applicable to the coastal and marine environment; (3) a description of data and information needs of selected coastal and marine activities; and (4) an outline of plans for marine monitoring systems for the east coast and a concept for an east coast remote sensing facility. Also discussed were user needs and remote sensing potentials in the areas of coastal processes and management, commercial and recreational fisheries, and marine physical processes.
On October 21 and 22, 1986, the Futures Group ran a two-day Futuring Workshop on the premises of NASA Lewis Research Center. The workshop had four main goals: to acquaint participants with the general history of technology forecasting; to familiarize participants with the range of forecasting methodologies; to acquaint participants with the range of applicability, strengths, and limitations of each method; and to offer participants some hands-on experience by working through both judgmental and quantitative case studies. Among the topics addressed during this workshop were: information sources; judgmental techniques; quantitative techniques; merger of judgment with quantitative measurement; data collection methods; and dealing with uncertainty.
These proceedings report the deliberations of a 3 1/2 day workshop on the Production and Use of Intense Radioactive Ion Beams at the Isospin Laboratory, which was held at the Joint Institute for Heavy Ion Research in Oak Ridge, Tennessee, October 1992. The purpose of this workshop was not to duplicate the programs of other recent radioactive ion beam workshops or international conferences that have focused on the scientific concepts which radioactive beams can, and in fact already are, addressing. Instead, the intent was to address the technical problems associated with the construction of the next generation ISOL facility andmore » to initiate a discussion of the type of experimental equipment that should be developed for such a facility. We have tried to bring together in Oak Ridge the world`s experts in radioactive targets/ion sources, light and heavy-ion accelerators, and detection systems. After 1 1/2 days of overview presentations, the participants divided into three discussion groups (Experiments with Radioactive Beams, Target Ion Sources and Mass Separation, and Accelerators-Primary and Secondary) for 1 1/2 days of detailed discussions of the most pertinent issues. The final session was devoted to reports from each of the discussion groups and a general discussion of where to go from here. An outgrowth of these discussions was the establishment of working groups to coordinate future technical developments associated with the pertinent issues. The proceedings include the text of all the overview presentations, reports from each discussion group, as well as contributions from those participants who chose to provide the text of their presentations in the discussion groups and the Concluding Remarks. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.« less
Provides a bibliography of 79 articles on technology and communication from the following sources: "ABI/Inform,""Academic Abstracts,""ERIC,""UMI's Dissertation Abstracts,""Wilson's Applied Science and Technology Index" and "Wilson's Education Index" (1986 through 1991); the "Journal…
This paper presents an overview of the Environmental Protection Agency's (EPA) Environmental Technology Verification (ETV) program which was established to overcome the numerous impediments to commercialization experienced by developers of innovative environmental technologies. ...
Most hospitals use technology strategically to differentiate themselves from their competition. The rapid rate of change in healthcare technologies necessitates development of a technology life-cycle management program. Having access to flexible sources of capital appropriate to each category of technology assets allows liabilities and assets to be matched on a "balanced" balance sheet.
... OSTWG is tasked with evaluating industry efforts to promote a safe online environment for children. The... and Technology Working Group Meeting AGENCY: National Telecommunications and Information... public meeting of the Online Safety and Technology Working Group (OSTWG). DATES: The meeting will be held...
Dorsten, Aimee-Marie; Sifford, K Susan; Bharucha, Ashok; Mecca, Laurel Person; Wactlar, Howard
2009-03-01
ASSISTIVE TECHNOLOGIES ARE RELATIVELY novel tools for research and daily care in long-term care (LTC) facilities that are faced with the burgeoning of the older adult population and dwindling staffing resources. The degree to which stakeholders in LTC facilities are receptive to the use of these technologies is poorly understood. Eighteen semi-structured focus groups and one interview were conducted with relevant groups of stakeholders at seven LTC facilities in southwestern Pennsylvania. Common themes identified across all focus groups centered on concerns for privacy, autonomy, cost, and safety associated with implementation of novel technologies. The relative importance of each theme varied by stakeholder group as well as the perceived severity of cognitive and/or physical disability. Our findings suggest that ethical issues are critical to acceptance of novel technologies by their end users, and that stakeholder groups are interdependent and require shared communication about the acceptance of these emerging technologies.
With technological advances in NICUs the survival rate of preterm infants has been increased. Because NICU environment is a potent source of stress for infants, its modification is an essential measure to decrease infants' morbidity. The purposes of this study were to compare the effects of wearing earmuff and provision silence for infants on their motor responses and gaining weight. In a randomized clinical trial 96 preterm infants were enrolled. Their motor responses were evaluated for two consecutive days in the morning and afternoon shifts, in the groups of earmuff and silence, and at similar time points in the control group. Also their weight was measured at days 1 and 10. In the two intervention groups, means of motor responses in infants were significantly less than in the control group, and weight gain of infants was more than the control group. However weight gain was more pronounced in the earmuff group. Both interventions led to decreasing number of motor responses and improvement of weight gain pattern, but these effects were more pronounced in earmuff group; thus because implementation of silence in NICUs has many barriers, it is suggested to use earmuff for preterm infants in these units. This trial obtained IRCT registration number IRCT2012092010812N2.
This paper highlights the current technology development activities of the MEMS Technology Group at JPL. A diverse range of MEMS/NEMS technologies are under development, that are primarily applicable to NASA"s needs in the area of robotic planetary exploration. MEMS/NEMS technologies have obvious advantages for space applications, since they offer the promise of highly capable devices with ultra low mass, size and power consumption. However, the key challenge appears to be in finding efficient means to transition these technologies into "customer" applications. A brief description of this problem is presented along with the Group"s innovative approach to rapidly advance the maturity of technologies via insertion into space missions. Also described are some of the major capabilities of the MEMS Technology Group. A few important examples from among the broad classes of technologies being developed are discussed, these include the "Spider Web Bolometer", High-Performance Miniature Gyroscopes, an Electron Luminescence X-ray Spectrometer, a MEMS-based "Knudsen" Thermal Transpiration pump, MEMS Inchworm Actuators, and Nanowire-based Biological/Chemical Sensors.
Doos, Lucy; Packer, Claire; Ward, Derek; Simpson, Sue; Stevens, Andrew
2016-03-10
Forecasting can support rational decision-making around the introduction and use of emerging health technologies and prevent investment in technologies that have limited long-term potential. However, forecasting methods need to be credible. We performed a systematic search to identify the methods used in forecasting studies to predict future health technologies within a 3-20-year timeframe. Identification and retrospective assessment of such methods potentially offer a route to more reliable prediction. Systematic search of the literature to identify studies reported on methods of forecasting in healthcare. People are not needed in this study. The authors searched MEDLINE, EMBASE, PsychINFO and grey literature sources, and included articles published in English that reported their methods and a list of identified technologies. Studies reporting methods used to predict future health technologies within a 3-20-year timeframe with an identified list of individual healthcare technologies. Commercially sponsored reviews, long-term futurology studies (with over 20-year timeframes) and speculative editorials were excluded. 15 studies met our inclusion criteria. Our results showed that the majority of studies (13/15) consulted experts either alone or in combination with other methods such as literature searching. Only 2 studies used more complex forecasting tools such as scenario building. The methodological fundamentals of formal 3-20-year prediction are consistent but vary in details. Further research needs to be conducted to ascertain if the predictions made were accurate and whether accuracy varies by the methods used or by the types of technologies identified. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/
The U.S. EPA's Office of Research and Development operates the Environmental Technology Verification (ETV) program to facilitate the deployment of innovative technologies through performance verification and information dissemination. Congress funds ETV in response to the belief ...
EPA‘s Environmental Technology Verification program is designed to further environmental protection by accelerating the acceptance and use of improved and cost effective technologies. This is done by providing high-quality, peer reviewed data on technology performance to those in...
The development of operative laparoscopic surgery is linked to advances in ancillary surgical instrumentation. Ultrasonic energy devices avoid the use of electricity and provide effective control of small- to medium-sized vessels. Bipolar computer-controlled electrosurgical technology eliminates the disadvantages of electrical energy, and a mechanical blade adds a cutting action. This instrument can provide effective hemostasis of large vessels up to 7 mm. Such devices significantly increase the cost of laparoscopic procedures, however, and the amount of evidence-based information on this topic is surprisingly scarce. This study compared the effectiveness of three different energy sources on the laparoscopic performance of a left colectomy. The trial included 38 nonselected patients with a disease of the colon requiring an elective segmental left-sided colon resection. Patients were preoperatively randomized into three groups. Group I had electrosurgery; vascular dissection was performed entirely with an electrosurgery generator, and vessels were controlled with clips. Group II underwent computer-controlled bipolar electrosurgery; vascular and mesocolon section was completed by using the 10-mm Ligasure device alone. In group III, 5-mm ultrasonic shears (Harmonic Scalpel) were used for bowel dissection, vascular pedicle dissection, and mesocolon transection. The mesenteric vessel pedicle was controlled with an endostapler. Demographics (age, sex, body mass index, comorbidity, previous surgery and diagnoses requiring surgery) were recorded, as were surgical details (operative time, conversion, blood loss), additional disposable instruments (number of trocars, EndoGIA charges, and clip appliers), and clinical outcome. Intraoperative economic costs were also evaluated. End points of the trial were operative time and intraoperative blood loss, and an intention-to-treat principle was followed. The three groups were well matched for demographic and pathologic features. Surgical time was significantly longer in patients operated on with conventional electrosurgery vs the Harmonic Scalpel or computed-based bipolar energy devices. This finding correlated with a significant reduction in intraoperative blood loss. Conversion to other endoscopic techniques was more frequent in Group I; however, conversion to open surgery was similar in all three groups. No intraoperative accident related to the use of the specific device was observed in any group. Immediate outcome was similar in the three groups, without differences in morbidity, mortality, or hospital stay. Analysis of operative costs showed no significant differences between the three groups. High-energy power sources specifically adapted for endoscopic surgery reduce operative time and blood loss and may be considered cost-effective when left colectomy is used as a model.
