Anomalous Low States and Long Term Variability in the Black Hole Binary LMC X-3

NASA Technical Reports Server (NTRS)

Smale, Alan P.; Boyd, Patricia T.

2012-01-01

Rossi X-my Timing Explorer observations of the black hole binary LMC X-3 reveal an extended very low X-ray state lasting from 2003 December 13 until 2004 March 18, unprecedented both in terms of its low luminosity (>15 times fainter than ever before seen in this source) and long duration (approx 3 times longer than a typical low/hard state excursion). During this event little to no source variability is observed on timescales of approx hours-weeks, and the X-ray spectrum implies an upper limit of 1.2 x 10(exp 35) erg/s, Five years later another extended low state occurs, lasting from 2008 December 11 until 2009 June 17. This event lasts nearly twice as long as the first, and while significant variability is observed, the source remains reliably in the low/hard spectral state for the approx 188 day duration. These episodes share some characteristics with the "anomalous low states" in the neutron star binary Her X-I. The average period and amplitude of the Variability of LMC X-3 have different values between these episodes. We characterize the long-term variability of LMC X-3 before and after the two events using conventional and nonlinear time series analysis methods, and show that, as is the case in Her X-I, the characteristic amplitude of the variability is related to its characteristic timescale. Furthermore, the relation is in the same direction in both systems. This suggests that a similar mechanism gives rise to the long-term variability, which in the case of Her X-I is reliably modeled with a tilted, warped precessing accretion disk.

Predicting vertically-nonsequential wetting patterns with a source-responsive model

USGS Publications Warehouse

Nimmo, John R.; Mitchell, Lara

2013-01-01

Water infiltrating into soil of natural structure often causes wetting patterns that do not develop in an orderly sequence. Because traditional unsaturated flow models represent a water advance that proceeds sequentially, they fail to predict irregular development of water distribution. In the source-responsive model, a diffuse domain (D) represents flow within soil matrix material following traditional formulations, and a source-responsive domain (S), characterized in terms of the capacity for preferential flow and its degree of activation, represents preferential flow as it responds to changing water-source conditions. In this paper we assume water undergoing rapid source-responsive transport at any particular time is of negligibly small volume; it becomes sensible at the time and depth where domain transfer occurs. A first-order transfer term represents abstraction from the S to the D domain which renders the water sensible. In tests with lab and field data, for some cases the model shows good quantitative agreement, and in all cases it captures the characteristic patterns of wetting that proceed nonsequentially in the vertical direction. In these tests we determined the values of the essential characterizing functions by inverse modeling. These functions relate directly to observable soil characteristics, rendering them amenable to evaluation and improvement through hydropedologic development.

Bias in Terms of Culture and a Method for Reducing It: An Eight-Country "Explanations of Unemployment Scale" Study

ERIC Educational Resources Information Center

Mylonas, Kostas; Furnham, Adrian; Divale, William; Leblebici, Cigdem; Gondim, Sonia; Moniz, Angela; Grad, Hector; Alvaro, Jose Luis; Cretu, Romeo Zeno; Filus, Ania; Boski, Pawel

2014-01-01

Several sources of bias can plague research data and individual assessment. When cultural groups are considered, across or even within countries, it is essential that the constructs assessed and evaluated are as free as possible from any source of bias and specifically from bias caused due to culturally specific characteristics. Employing the…

Standardization of terminology in field of ionizing radiations and their measurements

NASA Astrophysics Data System (ADS)

Yudin, M. F.; Karaveyev, F. M.

1984-03-01

A new standard terminology was introduced on 1 January 1982 by the Scientific-Technical Commission on All-Union State Standards to cover ionizing radiations and their measurements. It is based on earlier standards such as GOST 15484-74/81, 18445-70/73, 19849-74, 22490-77 as well as the latest recommendations by international committees. One hundred eighty-six terms and definitions in 14 paragraphs are contained. Fundamental concepts, sources and forms of ionizing radiations, characteristics and parameters of ionizing radiations, and methods of measuring their characteristics and parameters are covered. New terms have been added to existing ones. The equivalent English, French, and German terms are also given. The terms measurement of ionizing radiation and transfer of ionizing particles (equivalent of particle fluence of energy fluence) are still under discussion.

Amnion-derived stem cells: in quest of clinical applications

PubMed Central

2011-01-01

In the promising field of regenerative medicine, human perinatal stem cells are of great interest as potential stem cells with clinical applications. Perinatal stem cells could be isolated from normally discarded human placentae, which are an ideal cell source in terms of availability, the fewer number of ethical concerns, less DNA damage, and so on. Numerous studies have demonstrated that some of the placenta-derived cells possess stem cell characteristics like pluripotent differentiation ability, particularly in amniotic epithelial (AE) cells. Term human amniotic epithelium contains a relatively large number of stem cell marker-positive cells as an adult stem cell source. In this review, we introduce a model theory of why so many AE cells possess stem cell characteristics. We also describe previous work concerning the therapeutic applications and discuss the pluripotency of the AE cells and potential pitfalls for amnion-derived stem cell research. PMID:21596003

Bio-functions and molecular carbohydrate structure association study in forage with different source origins revealed using non-destructive vibrational molecular spectroscopy techniques

NASA Astrophysics Data System (ADS)

Ji, Cuiying; Zhang, Xuewei; Yan, Xiaogang; Mostafizar Rahman, M.; Prates, Luciana L.; Yu, Peiqiang

2017-08-01

The objectives of this study were to: 1) investigate forage carbohydrate molecular structure profiles; 2) bio-functions in terms of CHO rumen degradation characteristics and hourly effective degradation ratio of N to OM (HEDN/OM), and 3) quantify interactive association between molecular structures, bio-functions and nutrient availability. The vibrational molecular spectroscopy was applied to investigate the structure feature on a molecular basis. Two sourced-origin alfalfa forages were used as modeled forages. The results showed that the carbohydrate molecular structure profiles were highly linked to the bio-functions in terms of rumen degradation characteristics and hourly effective degradation ratio. The molecular spectroscopic technique can be used to detect forage carbohydrate structure features on a molecular basis and can be used to study interactive association between forage molecular structure and bio-functions.

Characteristics of aerobic granules grown on glucose a sequential batch shaking reactor.

PubMed

Cai, Chun-guang; Zhu, Nan-wen; Liu, Jun-shen; Wang, Zhen-peng; Cai, Wei-min

2004-01-01

Aerobic heterotrophic granular sludge was cultivated in a sequencing batch shaking reactor (SBSR) in which a synthetic wastewater containing glucose as carbon source was fed. The characteristics of the aerobic granules were investigated. Compared with the conventional activated sludge flocs, the aerobic granules exhibit excellent physical characteristics in terms of settleability, size, shape, biomass density, and physical strength. Scanning electron micrographs revealed that in mature granules little filamentous bacteria could be found, rod-shaped and coccoid bacteria were the dominant microorganisms.

Depolarization on Earth-space paths

NASA Technical Reports Server (NTRS)

1981-01-01

Sources of depolarization effects on the propagation paths of orthogonally-polarized information channels are considered. The main sources of depolarization at millimeter wave frequencies are hydrometeor absorption and scattering in the troposphere. Terms are defined. Mathematical formulations for the effects of the propagation medium characteristics and antenna performance on signals in dual polarization Earth-space links are presented. Techniques for modeling rain and ice depolarization are discussed.

A controlled variation scheme for convection treatment in pressure-based algorithm

NASA Technical Reports Server (NTRS)

Shyy, Wei; Thakur, Siddharth; Tucker, Kevin

1993-01-01

Convection effect and source terms are two primary sources of difficulties in computing turbulent reacting flows typically encountered in propulsion devices. The present work intends to elucidate the individual as well as the collective roles of convection and source terms in the fluid flow equations, and to devise appropriate treatments and implementations to improve our current capability of predicting such flows. A controlled variation scheme (CVS) has been under development in the context of a pressure-based algorithm, which has the characteristics of adaptively regulating the amount of numerical diffusivity, relative to central difference scheme, according to the variation in local flow field. Both the basic concepts and a pragmatic assessment will be presented to highlight the status of this work.

ON THE CONNECTION OF THE APPARENT PROPER MOTION AND THE VLBI STRUCTURE OF COMPACT RADIO SOURCES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moor, A.; Frey, S.; Lambert, S. B.

2011-06-15

Many of the compact extragalactic radio sources that are used as fiducial points to define the celestial reference frame are known to have proper motions detectable with long-term geodetic/astrometric very long baseline interferometry (VLBI) measurements. These changes can be as high as several hundred microarcseconds per year for certain objects. When imaged with VLBI at milliarcsecond (mas) angular resolution, these sources (radio-loud active galactic nuclei) typically show structures dominated by a compact, often unresolved 'core' and a one-sided 'jet'. The positional instability of compact radio sources is believed to be connected with changes in their brightness distribution structure. For themore » first time, we test this assumption in a statistical sense on a large sample rather than on only individual objects. We investigate a sample of 62 radio sources for which reliable long-term time series of astrometric positions as well as detailed 8 GHz VLBI brightness distribution models are available. We compare the characteristic direction of their extended jet structure and the direction of their apparent proper motion. We present our data and analysis method, and conclude that there is indeed a correlation between the two characteristic directions. However, there are cases where the {approx}1-10 mas scale VLBI jet directions are significantly misaligned with respect to the apparent proper motion direction.« less

Toward a Redefinition of Sex and Gender.

ERIC Educational Resources Information Center

Unger, Rhoda Kesler

1979-01-01

Present psychological terminology facilitates biologically determinist models of sex differences, making it less likely that environmental sources of such differences will be explored. The term "gender," rather than "sex," should be used for those characteristics socioculturally considered appropriate to males and females.…

Sparse reconstruction for quantitative bioluminescence tomography based on the incomplete variables truncated conjugate gradient method.

PubMed

He, Xiaowei; Liang, Jimin; Wang, Xiaorui; Yu, Jingjing; Qu, Xiaochao; Wang, Xiaodong; Hou, Yanbin; Chen, Duofang; Liu, Fang; Tian, Jie

2010-11-22

In this paper, we present an incomplete variables truncated conjugate gradient (IVTCG) method for bioluminescence tomography (BLT). Considering the sparse characteristic of the light source and insufficient surface measurement in the BLT scenarios, we combine a sparseness-inducing (ℓ1 norm) regularization term with a quadratic error term in the IVTCG-based framework for solving the inverse problem. By limiting the number of variables updated at each iterative and combining a variable splitting strategy to find the search direction more efficiently, it obtains fast and stable source reconstruction, even without a priori information of the permissible source region and multispectral measurements. Numerical experiments on a mouse atlas validate the effectiveness of the method. In vivo mouse experimental results further indicate its potential for a practical BLT system.

Bile salt-stimulated lipase of human milk: characterization of the enzyme from preterm and term milk

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freed, L.M.; Hamosh, P.; Hamosh, M.

1986-03-01

The bile salt-stimulated lipase (BSSL) of human milk is an important digestive enzyme in the newborn whose pancreatic function is immature. Milk from mothers delivering premature infants (preterm milk) has similar levels of BSSL activity to that of mothers of term infants (term milk). This study has determined whether the BSSL in preterm milk has the same characteristics as that in term milk. Milk samples were collected during the first 12 wk of lactation from seven mothers of infants born at 26-30 wk (very preterm, VPT), 31-37 wk (preterm, PT) and 37-42 wk (term, T) gestation. BSSL activity was measuredmore » using /sup 3/H-triolein emulsion as substrate. Time course, bile salt and enzyme concentration, pH and pH stability were studied, as well as inhibition of BSSL by eserine. The characteristics of BSSL from preterm and term milk were identical as were comparisons between colostrum and mature milk BSSL. BSSL from all milk sources had a neutral-to-alkaline pH optimum (pH 7.3-8.9), was stable at low pH for 60 min, and was 95-100% inhibited by eserine (greater than or equal to 0.6 mM). BSSL activity, regardless of enzyme source, was bile-salt dependent and was stimulated only by primary bile salts (taurocholate, glycocholate). The data indicate that the BSSL in milks of mothers delivering as early as 26 wk gestation is identical to that in term milk.« less

General formulation of characteristic time for persistent chemicals in a multimedia environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, D.H.; McKone, T.E.; Kastenberg, W.E.

1999-02-01

A simple yet representative method for determining the characteristic time a persistent organic pollutant remains in a multimedia environment is presented. The characteristic time is an important attribute for assessing long-term health and ecological impacts of a chemical. Calculating the characteristic time requires information on decay rates in multiple environmental media as well as the proportion of mass in each environmental medium. The authors explore the premise that using a steady-state distribution of the mass in the environment provides a means to calculate a representative estimate of the characteristic time while maintaining a simple formulation. Calculating the steady-state mass distributionmore » incorporates the effect of advective transport and nonequilibrium effects resulting from the source terms. Using several chemicals, they calculate and compare the characteristic time in a representative multimedia environment for dynamic, steady-state, and equilibrium multimedia models, and also for a single medium model. They demonstrate that formulating the characteristic time based on the steady-state mass distribution in the environment closely approximates the dynamic characteristic time for a range of chemicals and thus can be used in decisions regarding chemical use in the environment.« less

Final safety analysis report for the Galileo Mission: Volume 2: Book 1, Accident model document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Accident Model Document (AMD) is the second volume of the three volume Final Safety Analysis Report (FSAR) for the Galileo outer planetary space science mission. This mission employs Radioisotope Thermoelectric Generators (RTGs) as the prime electrical power sources for the spacecraft. Galileo will be launched into Earth orbit using the Space Shuttle and will use the Inertial Upper Stage (IUS) booster to place the spacecraft into an Earth escape trajectory. The RTG's employ silicon-germanium thermoelectric couples to produce electricity from the heat energy that results from the decay of the radioisotope fuel, Plutonium-238, used in the RTG heat source.more » The heat source configuration used in the RTG's is termed General Purpose Heat Source (GPHS), and the RTG's are designated GPHS-RTGs. The use of radioactive material in these missions necessitates evaluations of the radiological risks that may be encountered by launch complex personnel as well as by the Earth's general population resulting from postulated malfunctions or failures occurring in the mission operations. The FSAR presents the results of a rigorous safety assessment, including substantial analyses and testing, of the launch and deployment of the RTGs for the Galileo mission. This AMD is a summary of the potential accident and failure sequences which might result in fuel release, the analysis and testing methods employed, and the predicted source terms. Each source term consists of a quantity of fuel released, the location of release and the physical characteristics of the fuel released. Each source term has an associated probability of occurrence. 27 figs., 11 tabs.« less

The source, discharge, and chemical characteristics of water from Agua Caliente Spring, Palm Springs, California

USGS Publications Warehouse

Brandt, Justin; Catchings, Rufus D.; Christensen, Allen H.; Flint, Alan L.; Gandhok, Gini; Goldman, Mark R.; Halford, Keith J.; Langenheim, V.E.; Martin, Peter; Rymer, Michael J.; Schroeder, Roy A.; Smith, Gregory A.; Sneed, Michelle; Martin, Peter

2011-01-01

Agua Caliente Spring, in downtown Palm Springs, California, has been used for recreation and medicinal therapy for hundreds of years and currently (2008) is the source of hot water for the Spa Resort owned by the Agua Caliente Band of the Cahuilla Indians. The Agua Caliente Spring is located about 1,500 feet east of the eastern front of the San Jacinto Mountains on the southeast-sloping alluvial plain of the Coachella Valley. The objectives of this study were to (1) define the geologic structure associated with the Agua Caliente Spring; (2) define the source(s), and possibly the age(s), of water discharged by the spring; (3) ascertain the seasonal and longer-term variability of the natural discharge, water temperature, and chemical characteristics of the spring water; (4) evaluate whether water-level declines in the regional aquifer will influence the temperature of the spring discharge; and, (5) estimate the quantity of spring water that leaks out of the water-collector tank at the spring orifice.

TECHNICAL MANPOWER IN NEW YORK STATE. VOLUME I.

ERIC Educational Resources Information Center

PEARCE, C.A.; AND OTHERS

GROUPS OF TECHNICAL OCCUPATIONS ARE COMPARED IN TERMS OF CHARACTERISTICS OF EMPLOYMENT, SOURCE OF WORKERS, AND EDUCATIONAL AND EXPERIENCE REQUIREMENTS. SURVEY FINDINGS ARE GIVEN FOR EMPLOYER TRAINING PROGRAMS AND EMPLOYER VIEWS AND POLICIES ON THE UTILIZATION OF TECHNICIANS. THE SURVEY DATA WERE DERIVED FROM A SAMPLE OF 17,414 ESTABLISHMENTS…

A post-implementation evaluation of ceramic water filters distributed to tsunami-affected communities in Sri Lanka.

PubMed

Casanova, Lisa M; Walters, Adam; Naghawatte, Ajith; Sobsey, Mark D

2012-06-01

Sri Lanka was devastated by the 2004 Indian Ocean tsunami. During recovery, the Red Cross distributed approximately 12,000 free ceramic water filters. This cross-sectional study was an independent post-implementation assessment of 452 households that received filters, to determine the proportion still using filters, household characteristics associated with use, and quality of household drinking water. The proportion of continued users was high (76%). The most common household water sources were taps or shallow wells. The majority (82%) of users used filtered water for drinking only. Mean filter flow rate was 1.12 L/hr (0.80 L/hr for households with taps and 0.71 for those with wells). Water quality varied by source; households using tap water had source water of high microbial quality. Filters improved water quality, reducing Escherichia coli for households (largely well users) with high levels in their source water. Households were satisfied with filters and are potentially long-term users. To promote sustained use, recovery filter distribution efforts should try to identify households at greatest long-term risk, particularly those who have not moved to safer water sources during recovery. They should be joined with long-term commitment to building supply chains and local production capacity to ensure safe water access.

Clinical and analytical characteristics and short-term evolution of enteroviral meningitis in young infants presenting with fever without source.

PubMed

Gomez, Borja; Mintegi, Santiago; Rubio, Mari Cruz; Garcia, Diego; Garcia, Silvia; Benito, Javier

2012-06-01

The objective of this study was to describe the characteristics of the enteroviral meningitis diagnosed in a pediatric emergency department among infants younger than 3 months with fever without source and its short-term evolution. This was a retrospective, cross-sectional, 6-year descriptive study including all infants younger than 3 months who presented with fever without source and who were diagnosed with enteroviral meningitis. A lumbar puncture was practiced at their first emergency visit in 398 (29.5%) of 1348 infants, and 65 (4.8%) were diagnosed with enteroviral meningitis, 33 of them (50.7%) between May and July. Among these 65 infants, 61 were classified as well-appearing; parents referred irritability in 16 (25.3%) of them (without statistical significance when compared with infants without meningitis). Forty-one (63.0%) had no altered infectious parameters (white blood cell [WBC] count between 5000 and 15,000/μL, absolute neutrophil count less than 10,000/μL, and C-reactive protein less than 20 g/L), and 39 (60%) had no pleocytosis. All of the 65 infants recovered well, and none of them developed short-term complications. The symptoms in infants younger than 3 months with enteroviral meningitis were similar to those in infants with a self-limited febrile process without intracranial infection. C-reactive protein and WBC count were not good enteroviral meningitis predictors. Cerebrospinal fluid WBC count was normal in many of these infants, so performing a viral test is recommended for febrile infants younger than 3 months in which a lumbar puncture is practiced during warm months. The short-term evolution was benign.

A study on the uncertainty based on Meteorological fields on Source-receptor Relationships for Total Nitrate in the Northeast Asia

NASA Astrophysics Data System (ADS)

Sunwoo, Y.; Park, J.; Kim, S.; Ma, Y.; Chang, I.

2010-12-01

Northeast Asia hosts more than one third of world population and the emission of pollutants trends to increase rapidly, because of economic growth and the increase of the consumption in high energy intensity. In case of air pollutants, especially, its characteristics of emissions and transportation become issued nationally, in terms of not only environmental aspects, but also long-range transboundary transportation. In meteorological characteristics, westerlies area means what air pollutants that emitted from China can be delivered to South Korea. Therefore, considering meteorological factors can be important to understand air pollution phenomena. In this study, we used MM5(Fifth-Generation Mesoscale Model) and WRF(Weather Research and Forecasting Model) to produce the meteorological fields. We analyzed the feature of physics option in each model and the difference due to characteristic of WRF and MM5. We are trying to analyze the uncertainty of source-receptor relationships for total nitrate according to meteorological fields in the Northeast Asia. We produced the each meteorological fields that apply the same domain, same initial and boundary conditions, the best similar physics option. S-R relationships in terms of amount and fractional number for total nitrate (sum of N from HNO3, nitrate and PAN) were calculated by EMEP method 3.

A Comprehensive Probabilistic Tsunami Hazard Assessment: Multiple Sources and Short-Term Interactions

NASA Astrophysics Data System (ADS)

Anita, G.; Selva, J.; Laura, S.

2011-12-01

We develop a comprehensive and total probabilistic tsunami hazard assessment (TotPTHA), in which many different possible source types concur to the definition of the total tsunami hazard at given target sites. In a multi-hazard and multi-risk perspective, such an innovative approach allows, in principle, to consider all possible tsunamigenic sources, from seismic events, to slides, asteroids, volcanic eruptions, etc. In this respect, we also formally introduce and discuss the treatment of interaction/cascade effects in the TotPTHA analysis. We demonstrate how external triggering events may induce significant temporary variations in the tsunami hazard. Because of this, such effects should always be considered, at least in short-term applications, to obtain unbiased analyses. Finally, we prove the feasibility of the TotPTHA and of the treatment of interaction/cascade effects by applying this methodology to an ideal region with realistic characteristics (Neverland).

Frequency standard stability for Doppler measurements on-board the shuttle

NASA Technical Reports Server (NTRS)

Harton, P. L.

1974-01-01

The short and long term stability characteristics of crystal and atomic standards are described. Emphasis is placed on crystal oscillators because of the selection which was made for the shuttle baseline and the complexities which are introduced by the shuttle environment. Attention is given, first, to the definitions of stability and the application of these definitions to the shuttle system and its mission. Data from time domain measurements are used to illustrate the definitions. Results of a literature survey to determine environmental effects on frequency reference sources are then presented. Finally, methods of standard frequency dissemination over radio frequency carriers are noted as a possible means of measuring absolute accuracy and long term stability characteristics during on one way Doppler equipment.

Three-Dimensional Model Synthesis of the Global Methane Cycle

NASA Technical Reports Server (NTRS)

Fung, I.; Prather, M.; John, J.; Lerner, J.; Matthews, E.

1991-01-01

A synthesis of the global methane cycle is presented to attempt to generate an accurate global methane budget. Methane-flux measurements, energy data, and agricultural statistics are merged with databases of land-surface characteristics and anthropogenic activities. The sources and sinks of methane are estimated based on atmospheric methane composition and variations, and a global 3D transport model simulates the corresponding atmospheric responses. The geographic and seasonal variations of candidate budgets are compared with observational data, and the available observations are used to constrain the plausible methane budgets. The preferred budget includes annual destruction rates and annual emissions for various sources. The lack of direct flux measurements in the regions of many of these fluxes makes the unique determination of each term impossible. OH oxidation is found to be the largest single term, although more measurements of this and other terms are recommended.

The Effect of Interactivity with a Music Video Game on Second Language Vocabulary Recall

ERIC Educational Resources Information Center

deHaan, Jonathan; Reed, W. Michael; Kuwada, Katsuko

2010-01-01

Video games are potential sources of second language input; however, the medium's fundamental characteristic, interactivity, has not been thoroughly examined in terms of its effect on learning outcomes. This experimental study investigated to what degree, if at all, video game interactivity would help or hinder the noticing and recall of second…

Evaluation of actuator energy storage and power sources for spacecraft applications

NASA Technical Reports Server (NTRS)

Simon, William E.; Young, Fred M.

1993-01-01

The objective of this evaluation is to determine an optimum energy storage/power source combination for electrical actuation systems for existing (Solid Rocket Booster (SRB), Shuttle) and future (Advanced Launch System (ALS), Shuttle Derivative) vehicles. Characteristic of these applications is the requirement for high power pulses (50-200 kW) for short times (milliseconds to seconds), coupled with longer-term base or 'housekeeping' requirements (5-16 kW). Specific study parameters (e.g., weight, volume, etc.) as stated in the proposal and specified in the Statement of Work (SOW) are included.

Refraction and Shielding of Noise in Non-Axisymmetric Jets

NASA Technical Reports Server (NTRS)

Khavaran, Abbas

1996-01-01

This paper examines the shielding effect of the mean flow and refraction of sound in non-axisymmetric jets. A general three-dimensional ray-acoustic approach is applied. The methodology is independent of the exit geometry and may account for jet spreading and transverse as well as streamwise flow gradients. We assume that noise is dominated by small-scale turbulence. The source correlation terms, as described by the acoustic analogy approach, are simplified and a model is proposed that relates the source strength to 7/2 power of turbulence kinetic energy. Local characteristics of the source such as its strength, time- or length-scale, convection velocity and characteristic frequency are inferred from the mean flow considerations. Compressible Navier Stokes equations are solved with a k-e turbulence model. Numerical predictions are presented for a Mach 1.5, aspect ratio 2:1 elliptic jet. The predicted sound pressure level directivity demonstrates favorable agreement with reported data, indicating a relative quiet zone on the side of the major axis of the elliptic jet.

Assessment of the instantaneous unit hydrograph derived from the theory of topologically random networks

USGS Publications Warehouse

Karlinger, M.R.; Troutman, B.M.

1985-01-01

An instantaneous unit hydrograph (iuh) based on the theory of topologically random networks (topological iuh) is evaluated in terms of sets of basin characteristics and hydraulic parameters. Hydrographs were computed using two linear routing methods for each of two drainage basins in the southeastern United States and are the basis of comparison for the topological iuh's. Elements in the sets of basin characteristics for the topological iuh's are the number of first-order streams only, (N), or the nuber of sources together with the number of channel links in the topological diameter (N, D); the hydraulic parameters are values of the celerity and diffusivity constant. Sensitivity analyses indicate that the mean celerity of the internal links in the network is the critical hydraulic parameter for determining the shape of the topological iuh, while the diffusivity constant has minimal effect on the topological iuh. Asymptotic results (source-only) indicate the number of sources need not be large to approximate the topological iuh with the Weibull probability density function.

Framework for Evaluating Water Quality of the New England Crystalline Rock Aquifers

USGS Publications Warehouse

Harte, Philip T.; Robinson, Gilpin R.; Ayotte, Joseph D.; Flanagan, Sarah M.

2008-01-01

Little information exists on regional ground-water-quality patterns for the New England crystalline rock aquifers (NECRA). A systematic approach to facilitate regional evaluation is needed for several reasons. First, the NECRA are vulnerable to anthropogenic and natural contaminants such as methyl tert-butyl ether (MTBE), arsenic, and radon gas. Second, the physical characteristics of the aquifers, termed 'intrinsic susceptibility', can lead to variable and degraded water quality. A framework approach for characterizing the aquifer region into areas of similar hydrogeology is described in this report and is based on hypothesized relevant physical features and chemical conditions (collectively termed 'variables') that affect regional patterns of ground-water quality. A framework for comparison of water quality across the NECRA consists of a group of spatial variables related to aquifer properties, hydrologic conditions, and contaminant sources. These spatial variables are grouped under four general categories (features) that can be mapped across the aquifers: (1) geologic, (2) hydrophysiographic, (3) land-use land-cover, and (4) geochemical. On a regional scale, these variables represent indicators of natural and anthropogenic sources of contaminants, as well as generalized physical and chemical characteristics of the aquifer system that influence ground-water chemistry and flow. These variables can be used in varying combinations (depending on the contaminant) to categorize the aquifer into areas of similar hydrogeologic characteristics to evaluate variation in regional water quality through statistical testing.

Outer heliospheric radio emissions. II - Foreshock source models

NASA Technical Reports Server (NTRS)

Cairns, Iver H.; Kurth, William S.; Gurnett, Donald A.

1992-01-01

Observations of LF radio emissions in the range 2-3 kHz by the Voyager spacecraft during the intervals 1983-1987 and 1989 to the present while at heliocentric distances greater than 11 AU are reported. New analyses of the wave data are presented, and the characteristics of the radiation are reviewed and discussed. Two classes of events are distinguished: transient events with varying starting frequencies that drift upward in frequency and a relatively continuous component that remains near 2 kHz. Evidence for multiple transient sources and for extension of the 2-kHz component above the 2.4-kHz interference signal is presented. The transient emissions are interpreted in terms of radiation generated at multiples of the plasma frequency when solar wind density enhancements enter one or more regions of a foreshock sunward of the inner heliospheric shock. Solar wind density enhancements by factors of 4-10 are observed. Propagation effects, the number of radiation sources, and the time variability, frequency drift, and varying starting frequencies of the transient events are discussed in terms of foreshock sources.

Pb, Sr, and Nd isotopic compositions of a suite of Late Archean, igneous rocks, eastern Beartooth Mountains: implications for crust-mantle evolution

USGS Publications Warehouse

Wooden, J.L.; Mueller, P.A.

1988-01-01

A series of compositionally diverse, Late Archean rocks (2.74-2.79 Ga old) from the eastern Beartooth Mountains, Montana and Wyoming, U.S.A., have the same initial Pb, Sr, and Nd isotopic ratios. Lead and Sr initial ratios are higher and Nd initial ratios lower than would be expected for rocks derived from model mantle sources and strongly indicate the involvement of an older crustal reservoir in the genesis of these rocks. Crustal contamination during emplacement can be ruled out for a variety of reasons. Instead a model involving subduction of continental detritus and contamination of the overlying mantle as is often proposed for modern subduction environments is preferred. This contaminated mantle would have all the isotopic characteristics of mantle enriched by internal mantle metasomatism but would require no long-term growth or changes in parent to daughter element ratios. This contaminated mantle would make a good source for some of the Cenozoic mafic volcanics of the Columbia River, Snake River Plain, and Yellowstone volcanic fields that are proposed to come from ancient, enriched lithospheric mantle. The isotopic characteristics of the 2.70 Ga old Stillwater Complex are a perfect match for the proposed contaminated mantle which provides an alternative to crustal contamination during emplacement. The Pb isotopic characteristics of the Late Archean rocks of the eastern Beartooth Mountains are similar to those of other Late Archean rocks of the Wyoming Province and suggest that Early Archean, upper crustal rocks were common in this terrane. The isotopic signatures of Late Archean rocks in the Wyoming Province are distinctive from those of other Archean cratons in North America which are dominated by a MORB-like, Archean mantle source (Superior Province) and/or a long-term depleted crustal source (Greenland). ?? 1988.

M-H characteristics and demagnetization resistance of samarium-cobalt permanent magnets to 300 C

NASA Technical Reports Server (NTRS)

Niedra, J. M.

1992-01-01

The influence of temperature on the M-H demagnetization characteristics of permanent magnets is important information for the full utilization of the capabilities of samarium-cobalt magnets at high temperatures in demagnetization-resistant permanent magnet devices. In high temperature space power converters, such as free-piston Stirling engine driven linear alternators, magnet demagnetization can occur as long-term consequence of thermal agitation of domains and of metallurgical change, and also as an immediate consequence of too large an applied field. Investigated here is the short-term demagnetization resistance to applied fields derived from basic M-H data. These quasistatic demagnetization data were obtained for commercial, high-intrinsic-coercivity, Sm2Co17-type magnets from 5 sources, in the temperature range 23 to 300 C. An electromagnet driven, electronic hysteresigraph was used to test the 1-cm cubic samples. The observed variation of the 2nd quadrant M-H characteristics was a typical rapid loss of M-coercivity and a relatively lesser loss of remanence with increasing temperature.

The use of Banyumas traditional art as analog sources of elementary school science materials

NASA Astrophysics Data System (ADS)

Handayani, L.; Nugroho, S. E.; Rohidi, T. R.; Wiyanto

2018-03-01

All various traditional arts of Banyumas area support this area to be one famous region located in the periphery of West and Central Java with its unique cultural identity. In science learning, these traditional arts are very important aspect which can be implemented as a source of analog by students thinking a science concept analogically. This paper discusses a kind of Banyumas traditional art: the ebeg, and its cultural characteristics which can play a significant role in supporting elementary school students’ analogical thinking of a science material. The method used were literature and documentary studies. It is concluded that the ebeg provides many cultural characteristics which can be used as analog of elementary school science material, in terms of its music player’s motion, kinds of musical instruments played and its dancer motion.

Explosion Source Characteristics in Frozen and Unfrozen Rock

DTIC Science & Technology

2008-09-30

Alaska in August 2006 to provide empirical data on seismically -estimated yield from explosions it frozen rock Iaboratory studies have demonstrated that...can alter seismic yield. Central Alaska has abrupt lateral boundaries in discontinuous permafrost, and we detonated 3 shots in frozen, saturated rock...SUBJECT TERMS Seismic attenuation, Seismic propagation, Seismic characterization 16. SECURITY CLASSIFICATION OF: 17. LIMITATION 18. NUMBER 19a. NAME

Variational Iterative Refinement Source Term Estimation Algorithm Assessment for Rural and Urban Environments

NASA Astrophysics Data System (ADS)

Delle Monache, L.; Rodriguez, L. M.; Meech, S.; Hahn, D.; Betancourt, T.; Steinhoff, D.

2016-12-01

It is necessary to accurately estimate the initial source characteristics in the event of an accidental or intentional release of a Chemical, Biological, Radiological, or Nuclear (CBRN) agent into the atmosphere. The accurate estimation of the source characteristics are important because many times they are unknown and the Atmospheric Transport and Dispersion (AT&D) models rely heavily on these estimates to create hazard assessments. To correctly assess the source characteristics in an operational environment where time is critical, the National Center for Atmospheric Research (NCAR) has developed a Source Term Estimation (STE) method, known as the Variational Iterative Refinement STE algorithm (VIRSA). VIRSA consists of a combination of modeling systems. These systems include an AT&D model, its corresponding STE model, a Hybrid Lagrangian-Eulerian Plume Model (H-LEPM), and its mathematical adjoint model. In an operational scenario where we have information regarding the infrastructure of a city, the AT&D model used is the Urban Dispersion Model (UDM) and when using this model in VIRSA we refer to the system as uVIRSA. In all other scenarios where we do not have the city infrastructure information readily available, the AT&D model used is the Second-order Closure Integrated PUFF model (SCIPUFF) and the system is referred to as sVIRSA. VIRSA was originally developed using SCIPUFF 2.4 for the Defense Threat Reduction Agency and integrated into the Hazard Prediction and Assessment Capability and Joint Program for Information Systems Joint Effects Model. The results discussed here are the verification and validation of the upgraded system with SCIPUFF 3.0 and the newly implemented UDM capability. To verify uVIRSA and sVIRSA, synthetic concentration observation scenarios were created in urban and rural environments and the results of this verification are shown. Finally, we validate the STE performance of uVIRSA using scenarios from the Joint Urban 2003 (JU03) experiment, which was held in Oklahoma City and also validate the performance of sVIRSA using scenarios from the FUsing Sensor Integrated Observing Network (FUSION) Field Trial 2007 (FFT07), held at Dugway Proving Grounds in rural Utah.

The SPES surface ionization source

NASA Astrophysics Data System (ADS)

Manzolaro, M.; D'Agostini, F.; Monetti, A.; Andrighetto, A.

2017-09-01

Ion sources and target systems play a crucial role in isotope separation on line facilities, determining the main characteristics of the radioactive ion beams available for experiments. In the context of the selective production of exotic species (SPES) facility, a 40 MeV, 200 μA proton beam directly impinges a uranium carbide target, generating approximately 1013 fissions per second. The radioactive isotopes produced by the 238U fissions are delivered to the 1+ ion source by means of a tubular transfer line. Here they can be ionized and subsequently accelerated toward the experimental areas. In this work, the characterization of the surface ionization source currently adopted for the SPES facility is presented, taking as a reference ionization efficiency and transversal emittance measurements. The effects of long term operation at high temperature are also illustrated and discussed.

Low-grade geothermal energy conversion by organic Rankine cycle turbine generator

NASA Astrophysics Data System (ADS)

Zarling, J. P.; Aspnes, J. D.

Results of a demonstration project which helped determine the feasibility of converting low-grade thermal energy in 49 C water into electrical energy via an organic Rankine cycle 2500 watt (electrical) turbine-generator are presented. The geothermal source which supplied the water is located in a rural Alaskan village. The reasons an organic Rankine cycle turbine-generator was investigated as a possible source of electric power in rural Alaska are: (1) high cost of operating diesel-electric units and their poor long-term reliability when high-quality maintenance is unavailable and (2) the extremely high level of long-term reliability reportedly attained by commercially available organic Rankine cycle turbines. Data is provided on the thermal and electrical operating characteristics of an experimental organic Rankine cycle turbine-generator operating at a uniquely low vaporizer temperature.

High current liquid metal ion source using porous tungsten multiemitters.

PubMed

Tajmar, M; Vasiljevich, I; Grienauer, W

2010-12-01

We recently developed an indium Liquid-Metal-Ion-Source that can emit currents from sub-μA up to several mA. It is based on a porous tungsten crown structure with 28 individual emitters, which is manufactured using Micro-Powder Injection Molding (μPIM) and electrochemical etching. The emitter combines the advantages of internal capillary feeding with excellent emission properties due to micron-size tips. Significant progress was made on the homogeneity of the emission over its current-voltage characteristic as well as on investigating its long-term stability. This LMIS seems very suitable for space propulsion as well as for micro/nano manufacturing applications with greatly increased milling/drilling speeds. This paper summarizes the latest developments on our porous multiemitters with respect to manufacturing, emission properties and long-term testing. Copyright © 2010 Elsevier B.V. All rights reserved.

Long-Term Spectral and Timing Behavior of Black Hole Candidate XTE J1908+094

NASA Technical Reports Server (NTRS)

Gogus, E.; Finger, M. H.; Kouveliotou, C.; Woods, P. M.; Patel, S. K.; Rupen, M.; Swank, J. H.; Markwardt, C. B.; Van Der Klis, M.

2003-01-01

The X-ray transient XTE J1908+094 was serendipitously discovered during RXTE ToO observations of SGR 1900+14 in February 2002. Following the discovery, RXTE routinely monitored the region. At the onset, the source was found in a spectrally low/hard state lasting for approximately 40 days, followed by a quick transition to the highhoft state. At the highest X-ray intensity level (seen on 2002 April 6), the source flux (2-10 keV) reached approximately 105 mCrab, then decayed rapidly. Overall outburst characteristics resemble the transient behavior of galactic black hole candidates. Here, we present the long term light curves, and detailed spectral and timing investigations of XTE J1098+094 using the RXTE/PCA data. We also report the results of Chandra ACIS observations which were performed during the decay phase.

Low-flow characteristics of Virginia streams

USGS Publications Warehouse

Austin, Samuel H.; Krstolic, Jennifer L.; Wiegand, Ute

2011-01-01

Low-flow annual non-exceedance probabilities (ANEP), called probability-percent chance (P-percent chance) flow estimates, regional regression equations, and transfer methods are provided describing the low-flow characteristics of Virginia streams. Statistical methods are used to evaluate streamflow data. Analysis of Virginia streamflow data collected from 1895 through 2007 is summarized. Methods are provided for estimating low-flow characteristics of gaged and ungaged streams. The 1-, 4-, 7-, and 30-day average streamgaging station low-flow characteristics for 290 long-term, continuous-record, streamgaging stations are determined, adjusted for instances of zero flow using a conditional probability adjustment method, and presented for non-exceedance probabilities of 0.9, 0.8, 0.7, 0.6, 0.5, 0.4, 0.3, 0.2, 0.1, 0.05, 0.02, 0.01, and 0.005. Stream basin characteristics computed using spatial data and a geographic information system are used as explanatory variables in regional regression equations to estimate annual non-exceedance probabilities at gaged and ungaged sites and are summarized for 290 long-term, continuous-record streamgaging stations, 136 short-term, continuous-record streamgaging stations, and 613 partial-record streamgaging stations. Regional regression equations for six physiographic regions use basin characteristics to estimate 1-, 4-, 7-, and 30-day average low-flow annual non-exceedance probabilities at gaged and ungaged sites. Weighted low-flow values that combine computed streamgaging station low-flow characteristics and annual non-exceedance probabilities from regional regression equations provide improved low-flow estimates. Regression equations developed using the Maintenance of Variance with Extension (MOVE.1) method describe the line of organic correlation (LOC) with an appropriate index site for low-flow characteristics at 136 short-term, continuous-record streamgaging stations and 613 partial-record streamgaging stations. Monthly streamflow statistics computed on the individual daily mean streamflows of selected continuous-record streamgaging stations and curves describing flow-duration are presented. Text, figures, and lists are provided summarizing low-flow estimates, selected low-flow sites, delineated physiographic regions, basin characteristics, regression equations, error estimates, definitions, and data sources. This study supersedes previous studies of low flows in Virginia.

Related Studies in Long Term Lithium Battery Stability

NASA Technical Reports Server (NTRS)

Horning, R. J.; Chua, D. L.

1984-01-01

The continuing growth of the use of lithium electrochemical systems in a wide variety of both military and industrial applications is primarily a result of the significant benefits associated with the technology such as high energy density, wide temperature operation and long term stability. The stability or long term storage capability of a battery is a function of several factors, each important to the overall storage life and, therefore, each potentially a problem area if not addressed during the design, development and evaluation phases of the product cycle. Design (e.g., reserve vs active), inherent material thermal stability, material compatibility and self-discharge characteristics are examples of factors key to the storability of a power source.

Chandra Observation of Luminous and Ultraluminous X-ray Binaries in M101

NASA Technical Reports Server (NTRS)

Mukai, K.; Pence, W. D.; Snowden, S. L.; Kuntz, K. D.; White, Nicholas E. (Technical Monitor)

2002-01-01

X-ray binaries in the Milky Way are among the brightest objects on the X-ray sky. With the increasing sensitivity of recent missions, it is now possible to study X-ray binaries in nearby galaxies. We present data on six ultraluminous binaries in the nearby spiral galaxy, M101, obtained with Chandra ACIS-S. Of these, five appear to be similar to ultraluminous sources in other galaxies, while the brightest source, P098, shows some unique characteristics. We present our interpretation of the data in terms of an optically thick outflow, and discuss implications.

Is Privately Funded Research on the Rise in Ocean Science?

NASA Astrophysics Data System (ADS)

Spring, M.; Cooksey, S. W.; Orcutt, J. A.; Ramberg, S. E.; Jankowski, J. E.; Mengelt, C.

2014-12-01

While federal funding for oceanography is leveling off or declining, private sector funding from industry and philanthropy appears to be on the rise. The Ocean Studies Board of the National Research Council is discussing these changes in the ocean science funding landscape. In 2014 the Board convened experts to better understand the long term public and private funding trends for the ocean sciences and the implications of such trends for the ocean science enterprise and the nation. Specific topics of discussion included: (1) the current scope of philanthropic and industry funding for the ocean sciences; (2) the long-term trends in the funding balance between federal and other sources of funding; (3) the priorities and goals for private funders; and (4) the characteristics of various modes of engagement for private funders. Although public funding remains the dominant source of research funding, it is unclear how far or fast that balance might shift in the future nor what a shifting balance may mean. There has been no comprehensive assessment of the magnitude and impact of privately-funded science, particularly the ocean sciences, as public funding sources decline. Nevertheless, the existing data can shed some light on these questions. We will present available data on long-term trends in federal and other sources of funding for science (focusing on ocean science) and report on preliminary findings from a panel discussion with key private foundations and industry funders.

Enhanced Elliptic Grid Generation

NASA Technical Reports Server (NTRS)

Kaul, Upender K.

2007-01-01

An enhanced method of elliptic grid generation has been invented. Whereas prior methods require user input of certain grid parameters, this method provides for these parameters to be determined automatically. "Elliptic grid generation" signifies generation of generalized curvilinear coordinate grids through solution of elliptic partial differential equations (PDEs). Usually, such grids are fitted to bounding bodies and used in numerical solution of other PDEs like those of fluid flow, heat flow, and electromagnetics. Such a grid is smooth and has continuous first and second derivatives (and possibly also continuous higher-order derivatives), grid lines are appropriately stretched or clustered, and grid lines are orthogonal or nearly so over most of the grid domain. The source terms in the grid-generating PDEs (hereafter called "defining" PDEs) make it possible for the grid to satisfy requirements for clustering and orthogonality properties in the vicinity of specific surfaces in three dimensions or in the vicinity of specific lines in two dimensions. The grid parameters in question are decay parameters that appear in the source terms of the inhomogeneous defining PDEs. The decay parameters are characteristic lengths in exponential- decay factors that express how the influences of the boundaries decrease with distance from the boundaries. These terms govern the rates at which distance between adjacent grid lines change with distance from nearby boundaries. Heretofore, users have arbitrarily specified decay parameters. However, the characteristic lengths are coupled with the strengths of the source terms, such that arbitrary specification could lead to conflicts among parameter values. Moreover, the manual insertion of decay parameters is cumbersome for static grids and infeasible for dynamically changing grids. In the present method, manual insertion and user specification of decay parameters are neither required nor allowed. Instead, the decay parameters are determined automatically as part of the solution of the defining PDEs. Depending on the shape of the boundary segments and the physical nature of the problem to be solved on the grid, the solution of the defining PDEs may provide for rates of decay to vary along and among the boundary segments and may lend itself to interpretation in terms of one or more physical quantities associated with the problem.

Characteristics of aerobic granules grown on glucose and acetate in sequential aerobic sludge blanket reactors.

PubMed

Tay, J H; Liu, Q S; Liu, Y

2002-08-01

Aerobic granules were cultivated in two column-type sequential aerobic sludge blanket reactors fed with glucose and acetate, respectively. The characteristics of aerobic granules were investigated. Results indicated that the glucose- and acetate-fed granules have comparable characteristics in terms of settling velocity, size, shape, biomass density, hydrophobicity, physical strength, microbial activity and storage stability. Substrate component does not seem to be a key factor on the formation of aerobic granules. However, microbial diversity of the granules is closely associated with the carbon sources supplied to the reactors. Compared with the conventional activated sludge flocs, aerobic granules exhibit excellent physical characteristics that would be essential for industrial application. This research provides a complete set of characteristics data of aerobic granules grown on glucose and acetate, which would be useful for further development of aerobic granules-based compact bioreactor for handling high strength organic wastewater.

The low-frequency sound power measuring technique for an underwater source in a non-anechoic tank

NASA Astrophysics Data System (ADS)

Zhang, Yi-Ming; Tang, Rui; Li, Qi; Shang, Da-Jing

2018-03-01

In order to determine the radiated sound power of an underwater source below the Schroeder cut-off frequency in a non-anechoic tank, a low-frequency extension measuring technique is proposed. This technique is based on a unique relationship between the transmission characteristics of the enclosed field and those of the free field, which can be obtained as a correction term based on previous measurements of a known simple source. The radiated sound power of an unknown underwater source in the free field can thereby be obtained accurately from measurements in a non-anechoic tank. To verify the validity of the proposed technique, a mathematical model of the enclosed field is established using normal-mode theory, and the relationship between the transmission characteristics of the enclosed and free fields is obtained. The radiated sound power of an underwater transducer source is tested in a glass tank using the proposed low-frequency extension measuring technique. Compared with the free field, the radiated sound power level of the narrowband spectrum deviation is found to be less than 3 dB, and the 1/3 octave spectrum deviation is found to be less than 1 dB. The proposed testing technique can be used not only to extend the low-frequency applications of non-anechoic tanks, but also for measurement of radiated sound power from complicated sources in non-anechoic tanks.

Configurations and implementation of payroll system using open source erp: a case study of Koperasi PT Sri

NASA Astrophysics Data System (ADS)

Terminanto, A.; Swantoro, H. A.; Hidayanto, A. N.

2017-12-01

Enterprise Resource Planning (ERP) is an integrated information system to manage business processes of companies of various business scales. Because of the high cost of ERP investment, ERP implementation is usually done in large-scale enterprises, Due to the complexity of implementation problems, the success rate of ERP implementation is still low. Open Source System ERP becomes an alternative choice of ERP application to SME companies in terms of cost and customization. This study aims to identify characteristics and configure the implementation of OSS ERP Payroll module in KKPS (Employee Cooperative PT SRI) using OSS ERP Odoo and using ASAP method. This study is classified into case study research and action research. Implementation of OSS ERP Payroll module is done because the HR section of KKPS has not been integrated with other parts. The results of this study are the characteristics and configuration of OSS ERP payroll module in KKPS.

Evaluation of forest disturbance legacy effects on dissolved organic matter characteristics in streams at the Hubbard Brook Experimental Forest, New Hampshire

Treesearch

Kaelin M. Cawley; John Campbell; Melissa Zwilling; Rudolf. Jaffé

2014-01-01

Dissolved organic matter (DOM) source and composition are critical drivers of its reactivity, impact microbial food webs and influence ecosystem functions. It is believed that DOM composition and abundance represent an integrated signal derived from the surrounding watershed. Recent studies have shown that land-use may have a long-term effect on DOM composition....

A Non-Linear Model for Elastic Dielectric Crystals with Mobile Vacancies

DTIC Science & Technology

2009-07-01

crystals, vacancies typically carry an electric charge [18,37]. Such charged vacancies notably influence dielectric properties and elec- trical loss...characteristics of capacitors, oscillators, and tunable fil- ters [19], for example those comprised of perovskite ceramic crystals such as barium titanate...thermomechanical and thermoelectrical couplings, respectively, and the final term capturing non-mechanical sources of heat energy. 3.3. Representative free energy

The validity of open-source data when assessing jail suicides.

PubMed

Thomas, Amanda L; Scott, Jacqueline; Mellow, Jeff

2018-05-09

The Bureau of Justice Statistics' Deaths in Custody Reporting Program is the primary source for jail suicide research, though the data is restricted from general dissemination. This study is the first to examine whether jail suicide data obtained from publicly available sources can help inform our understanding of this serious public health problem. Of the 304 suicides that were reported through the DCRP in 2009, roughly 56 percent (N = 170) of those suicides were identified through the open-source search protocol. Each of the sources was assessed based on how much information was collected on the incident and the types of variables available. A descriptive analysis was then conducted on the variables that were present in both data sources. The four variables present in each data source were: (1) demographic characteristics of the victim, (2) the location of occurrence within the facility, (3) the location of occurrence by state, and (4) the size of the facility. Findings demonstrate that the prevalence and correlates of jail suicides are extremely similar in both open-source and official data. However, for almost every variable measured, open-source data captured as much information as official data did, if not more. Further, variables not found in official data were identified in the open-source database, thus allowing researchers to have a more nuanced understanding of the situational characteristics of the event. This research provides support for the argument in favor of including open-source data in jail suicide research as it illustrates how open-source data can be used to provide additional information not originally found in official data. In sum, this research is vital in terms of possible suicide prevention, which may be directly linked to being able to manipulate environmental factors.

An interpretation of induced electric currents in long pipelines caused by natural geomagnetic sources of the upper atmosphere

USGS Publications Warehouse

Campbell, W.H.

1986-01-01

Electric currents in long pipelines can contribute to corrosion effects that limit the pipe's lifetime. One cause of such electric currents is the geomagnetic field variations that have sources in the Earth's upper atmosphere. Knowledge of the general behavior of the sources allows a prediction of the occurrence times, favorable locations for the pipeline effects, and long-term projections of corrosion contributions. The source spectral characteristics, the Earth's conductivity profile, and a corrosion-frequency dependence limit the period range of the natural field changes that affect the pipe. The corrosion contribution by induced currents from geomagnetic sources should be evaluated for pipelines that are located at high and at equatorial latitudes. At midlatitude locations, the times of these natural current maxima should be avoided for the necessary accurate monitoring of the pipe-to-soil potential. ?? 1986 D. Reidel Publishing Company.

M-H characteristics and demagnetization resistance of samarium-cobalt permanent magnets to 300 C

NASA Technical Reports Server (NTRS)

Niedra, Janis M.

1992-01-01

The influence of temperature on the M-H demagnetization characteristics of permanent magnets is important information for the full utilization of the capabilities of samarium-cobalt magnets at high temperatures in demagnetization-resistant permanent magnet devices. In high temperature space power converters, such as free-piston Stirling engine driven linear alternators, magnet demagnetization can occur as a long-term consequence of thermal agitation of domains and of metallurgical change, and also as an immediate consequence of too large an applied field. Investigated here is the short-term demagnetization resistance to applied fields derived from basic M-H data. This quasistatic demagnetization data was obtained for commercial, high-intrinsic-coercivity, Sm2Co17-type magnets from 5 sources, in the temperature range 23 to 300 C. An electromagnet driven, electronic hysteresigraph was used to test the 1-cm cubic samples. The observed variation of the 2nd quadrant M-H characteristics was a typical rapid loss of M-coercivity and a relatively lesser loss of remanence with increasing temperature. The 2nd quadrant M-H curve knee point is used to define the limits of operation safe against irreversible demagnetization due to an excessive bucking field for a given flux density swing at temperature. Such safe operating area plots are shown to differentiate the high temperature capabilities of the samples from different sources. For most of the samples, their 2nd quadrant M-H loop squareness increased with temperature, reaching a peak or a plateau above 250 C.

Computation of high Reynolds number internal/external flows

NASA Technical Reports Server (NTRS)

Cline, M. C.; Wilmoth, R. G.

1981-01-01

A general, user oriented computer program, called VNAP2, has been developed to calculate high Reynolds number, internal/external flows. VNAP2 solves the two-dimensional, time-dependent Navier-Stokes equations. The turbulence is modeled with either a mixing-length, a one transport equation, or a two transport equation model. Interior grid points are computed using the explicit MacCormack scheme with special procedures to speed up the calculation in the fine grid. All boundary conditions are calculated using a reference plane characteristic scheme with the viscous terms treated as source terms. Several internal, and internal/external flow calculations are presented.

Computation of high Reynolds number internal/external flows

NASA Technical Reports Server (NTRS)

Cline, M. C.; Wilmoth, R. G.

1981-01-01

A general, user oriented computer program, called VNAP2, was developed to calculate high Reynolds number, internal/ external flows. The VNAP2 program solves the two dimensional, time dependent Navier-Stokes equations. The turbulence is modeled with either a mixing-length, a one transport equation, or a two transport equation model. Interior grid points are computed using the explicit MacCormack Scheme with special procedures to speed up the calculation in the fine grid. All boundary conditions are calculated using a reference plane characteristic scheme with the viscous terms treated as source terms. Several internal, external, and internal/external flow calculations are presented.

Computation of high Reynolds number internal/external flows

NASA Technical Reports Server (NTRS)

Cline, M. C.; Wilmoth, R. G.

1981-01-01

A general, user oriented computer program, called VNAF2, developed to calculate high Reynolds number internal/external flows is described. The program solves the two dimensional, time dependent Navier-Stokes equations. Turbulence is modeled with either a mixing length, a one transport equation, or a two transport equation model. Interior grid points are computed using the explicit MacCormack scheme with special procedures to speed up the calculation in the fine grid. All boundary conditions are calculated using a reference plane characteristic scheme with the viscous terms treated as source terms. Several internal, external, and internal/external flow calculations are presented.

[Spatio-temporal characteristics and source identification of water pollutants in Wenruitang River watershed].

PubMed

Ma, Xiao-xue; Wang, La-chun; Liao, Ling-ling

2015-01-01

Identifying the temp-spatial distribution and sources of water pollutants is of great significance for efficient water quality management pollution control in Wenruitang River watershed, China. A total of twelve water quality parameters, including temperature, pH, dissolved oxygen (DO), total nitrogen (TN), ammonia nitrogen (NH4+ -N), electrical conductivity (EC), turbidity (Turb), nitrite-N (NO2-), nitrate-N(NO3-), phosphate-P(PO4(3-), total organic carbon (TOC) and silicate (SiO3(2-)), were analyzed from September, 2008 to October, 2009. Geographic information system(GIS) and principal component analysis(PCA) were used to determine the spatial distribution and to apportion the sources of pollutants. The results demonstrated that TN, NH4+ -N, PO4(3-) were the main pollutants during flow period, wet period, dry period, respectively, which was mainly caused by urban point sources and agricultural and rural non-point sources. In spatial terms, the order of pollution was tertiary river > secondary river > primary river, while the water quality was worse in city zones than in the suburb and wetland zone regardless of the river classification. In temporal terms, the order of pollution was dry period > wet period > flow period. Population density, land use type and water transfer affected the water quality in Wenruitang River.

Long-Term Spectral and Timing Behavior of the Black Hole Candidate XTE J1908+094

NASA Technical Reports Server (NTRS)

Gogus, Ersin; Finger, Mark H.; Kouveliotou, Chryssa; Woods, Peter M.; Patel, Sandeep K.; Ruppen, Michael; Swank, Jean H.; Markwardt, Craig B.; VanDerKlis, Michiel

2004-01-01

We present the long-term X-ray light curves and detailed spectral and timing analyses of XTE J1908+094 using the Rossi X-Ray Timing Explorer Proportional Counter Array observations covering two outbursts in 2002 and early 2003. At the onset of the first outburst, the source was found in a spectrally low/hard state lasting for approx.40 days, followed by a 3 day long transition to the high/soft state. The source flux (in 2- 10 keV) reached approx.100 mcrab on 2002 April 6, then decayed rapidly. In power spectra, we detect strong band-limited noise and varying low- frequency quasi-periodic oscillations that evolved from approx.0.5 to approx.5 Hz during the initial low/hard state of the source. We find that the second outburst closely resembled the spectral evolution of the first. The X-ray transient s overall outburst characteristics led us to classify XTE J1908+094 as a black hole candidate. Here we also derive precise X-ray position of the source using Chandra observations that were performed during the decay phase of the first outburst and following the second outburst.

Surface switching statistics of rotating fluid: Disk-rim gap effects

NASA Astrophysics Data System (ADS)

Tasaka, Yuji; Iima, Makoto

2017-04-01

We examined the influence of internal noise on the irregular switching of the shape of the free surface of fluids in an open cylindrical vessel driven by a bottom disk rotating at constant speed [Suzuki, Iima, and Hayase, Phys. Fluids 18, 101701 (2006), 10.1063/1.2359740]. A slight increase in the disk-rim gap (less than 3% of the disk radius) was established experimentally to cause significant changes in this system, specifically, frequent appearance of the surface descending event connecting a nonaxisymmetric shape in strong mixing flow (turbulent flow) and an axisymmetric shape in laminar flow, as well as a shift in critical Reynolds number that define the characteristic states. The physical mechanism underlying the change is analyzed in terms of flow characteristics in the disk-rim gap, which acts as a noise source, and a mathematical model established from measurements of the surface height fluctuations with noise term.

Assessment of infrasound signals recorded on seismic stations and infrasound arrays in the western United States using ground truth sources

NASA Astrophysics Data System (ADS)

Park, Junghyun; Hayward, Chris; Stump, Brian W.

2018-06-01

Ground truth sources in Utah during 2003-2013 are used to assess the contribution of temporal atmospheric conditions to infrasound detection and the predictive capabilities of atmospheric models. Ground truth sources consist of 28 long duration static rocket motor burn tests and 28 impulsive rocket body demolitions. Automated infrasound detections from a hybrid of regional seismometers and infrasound arrays use a combination of short-term time average/long-term time average ratios and spectral analyses. These detections are grouped into station triads using a Delaunay triangulation network and then associated to estimate phase velocity and azimuth to filter signals associated with a particular source location. The resulting range and azimuth distribution from sources to detecting stations varies seasonally and is consistent with predictions based on seasonal atmospheric models. Impulsive signals from rocket body detonations are observed at greater distances (>700 km) than the extended duration signals generated by the rocket burn test (up to 600 km). Infrasound energy attenuation associated with the two source types is quantified as a function of range and azimuth from infrasound amplitude measurements. Ray-tracing results using Ground-to-Space atmospheric specifications are compared to these observations and illustrate the degree to which the time variations in characteristics of the observations can be predicted over a multiple year time period.

Short-term annoyance reactions to stationary and time-varying wind turbine and road traffic noise: A laboratory study.

PubMed

Schäffer, Beat; Schlittmeier, Sabine J; Pieren, Reto; Heutschi, Kurt; Brink, Mark; Graf, Ralf; Hellbrück, Jürgen

2016-05-01

Current literature suggests that wind turbine noise is more annoying than transportation noise. To date, however, it is not known which acoustic characteristics of wind turbines alone, i.e., without effect modifiers such as visibility, are associated with annoyance. The objective of this study was therefore to investigate and compare the short-term noise annoyance reactions to wind turbines and road traffic in controlled laboratory listening tests. A set of acoustic scenarios was created which, combined with the factorial design of the listening tests, allowed separating the individual associations of three acoustic characteristics with annoyance, namely, source type (wind turbine, road traffic), A-weighted sound pressure level, and amplitude modulation (without, periodic, random). Sixty participants rated their annoyance to the sounds. At the same A-weighted sound pressure level, wind turbine noise was found to be associated with higher annoyance than road traffic noise, particularly with amplitude modulation. The increased annoyance to amplitude modulation of wind turbines is not related to its periodicity, but seems to depend on the modulation frequency range. The study discloses a direct link of different acoustic characteristics to annoyance, yet the generalizability to long-term exposure in the field still needs to be verified.

Optically stimulated luminescence of borate glasses containing magnesia, quicklime, lithium and potassium carbonates

NASA Astrophysics Data System (ADS)

Valença, J. V. B.; Silveira, I. S.; Silva, A. C. A.; Dantas, N. O.; Antonio, P. L.; Caldas, L. V. E.; d'Errico, F.; Souza, S. O.

2017-11-01

The OSL characteristics of three different borate glass matrices containing magnesia (LMB), quicklime (LCB) or potassium carbonate (LKB) were examined. Five different formulations for each composition were produced using a melt-quenching method and analyzed in terms of both dose-response curves and OSL shape decay. The samples were irradiated using a 90Sr/90Y beta source with doses up to 30 Gy. Dose-response curves were plotted using the initial OSL intensity as the chosen parameter. The OSL analysis showed that LKB glasses are the most sensitive to beta irradiation. For the most sensitive LKB composition, the irradiation process was also done using a 60Co gamma source in a dose range from 200 to 800 Gy. In all cases, no saturation was observed. A fitting process using a three-term exponential function was performed for the most sensitive formulations of each composition, which suggested a similar behavior in the OSL decay.

Estimates of long-term mean-annual nutrient loads considered for use in SPARROW models of the Midcontinental region of Canada and the United States, 2002 base year

USGS Publications Warehouse

Saad, David A.; Benoy, Glenn A.; Robertson, Dale M.

2018-05-11

Streamflow and nutrient concentration data needed to compute nitrogen and phosphorus loads were compiled from Federal, State, Provincial, and local agency databases and also from selected university databases. The nitrogen and phosphorus loads are necessary inputs to Spatially Referenced Regressions on Watershed Attributes (SPARROW) models. SPARROW models are a way to estimate the distribution, sources, and transport of nutrients in streams throughout the Midcontinental region of Canada and the United States. After screening the data, approximately 1,500 sites sampled by 34 agencies were identified as having suitable data for calculating the long-term mean-annual nutrient loads required for SPARROW model calibration. These final sites represent a wide range in watershed sizes, types of nutrient sources, and land-use and watershed characteristics in the Midcontinental region of Canada and the United States.

Reprint of: High current liquid metal ion source using porous tungsten multiemitters.

PubMed

Tajmar, M; Vasiljevich, I; Grienauer, W

2011-05-01

We recently developed an indium Liquid-Metal-Ion-Source that can emit currents from sub-μA up to several mA. It is based on a porous tungsten crown structure with 28 individual emitters, which is manufactured using Micro-Powder Injection Molding (μPIM) and electrochemical etching. The emitter combines the advantages of internal capillary feeding with excellent emission properties due to micron-size tips. Significant progress was made on the homogeneity of the emission over its current-voltage characteristic as well as on investigating its long-term stability. This LMIS seems very suitable for space propulsion as well as for micro/nano manufacturing applications with greatly increased milling/drilling speeds. This paper summarizes the latest developments on our porous multiemitters with respect to manufacturing, emission properties and long-term testing. Copyright © 2010 Elsevier B.V. All rights reserved.

Tuning Into Brown Dwarfs: Long-Term Radio Monitoring of Two Very Low Mass Dwarfs

NASA Astrophysics Data System (ADS)

Van Linge, Russell; Burgasser, Adam J.; Melis, Carl; Williams, Peter K. G.

2017-01-01

The very lowest-mass (VLM) stars and brown dwarfs, with effective temperatures T < 3000 K, exhibit mixed magnetic activity trends, with H-alpha and X-ray emission that declines rapidly beyond type M7/M8, but persistent radio emission in roughly 10-20% of sources. The dozen or so VLM radio emitters known show a broad range of emission characteristics and time-dependent behavior, including steady persistent emission, periodic oscillations, periodic polarized bursts, and aperiodic flares. Understanding the evolution of these variability patterns, and in particular whether they undergo solar-like cycles, requires long-term monitoring. We report the results of a long-term JVLA monitoring program of two magnetically-active VLM dwarf binaries, the young M7 2MASS 1314+1320AB and older L5 2MASS 1315-2649AB. On the bi-weekly cadence, 2MASS 1314 continues to show variability by revealing regular flaring while 2MASS 1315 continues to be a quiescent emitter. On the daily time scale, both sources show a mean flux density that can vary significantly just over a few days. These results suggest long-term radio behavior in radio-emitting VLM dwarfs is just as diverse and complex as short-term behavior.

An analysis of the readability characteristics of oral health information literature available to the public in Tasmania, Australia.

PubMed

Barnett, Tony; Hoang, Ha; Furlan, Ashlea

2016-03-17

The effectiveness of print-based health promotion materials is dependent on their readability. This study aimed to assess the characteristics of print-based oral health information literature publically available in Tasmania, Australia. Oral health education brochures were collected from 11 dental clinics across Tasmania and assessed for structure and format, content and readability. Reading level was calculated using three widely-used measures: Flesch-Kincaid Grade Level (FKGL), Flesch Reading Ease, and Simple Measure of Gobbledygook (SMOG) reading grade level. The FKGL of the 67 brochures sampled ranged from grade 3 to 13. The grade level for government health department brochures (n = 14) ranged from grade 4 to 11 (5.6 ± 1.8). Reading levels for materials produced by commercial sources (n = 22) ranged from 3 to 13 (8.3 ± 2.1), those from professional associations (n = 22) ranged from grade 7 to 11 (8.9 ± 0.9) and brochures produced by other sources (n = 9) ranged from 5 to 10 (7.6 ± 1.5). The SMOG test was positively correlated with the FKGL (rs = 0.92, p < 0.001) though consistently rated materials 2-3 grades higher. The reading level required to comprehend brochures published by government sources were, on average, lower than those from commercial, professional and other sources. Government materials were also more likely to contain fewer words and professional jargon terms than brochures from the other sources. A range of oral health information brochures were publically available for patients in both public and private dental clinics. However, their readability characteristics differed. Many brochures required a reading skill level higher than that suited to a large proportion of the Tasmanian population. Readability and other characteristics of oral health education materials should be assessed to ensure their suitability for use with patients, especially those suspected of having low literacy skills.

Survey of ion plating sources

NASA Technical Reports Server (NTRS)

Spalvins, T.

1979-01-01

Ion plating is a plasma deposition technique where ions of the gas and the evaporant have a decisive role in the formation of a coating in terms of adherence, coherence, and morphological growth. The range of materials that can be ion plated is predominantly determined by the selection of the evaporation source. Based on the type of evaporation source, gaseous media and mode of transport, the following will be discussed: resistance, electron beam sputtering, reactive and ion beam evaporation. Ionization efficiencies and ion energies in the glow discharge determine the percentage of atoms which are ionized under typical ion plating conditions. The plating flux consists of a small number of energetic ions and a large number of energetic neutrals. The energy distribution ranges from thermal energies up to a maximum energy of the discharge. The various reaction mechanisms which contribute to the exceptionally strong adherence - formation of a graded substrate/coating interface are not fully understood, however the controlling factors are evaluated. The influence of process variables on the nucleation and growth characteristics are illustrated in terms of morphological changes which affect the mechanical and tribological properties of the coating.

Combining molecular fingerprints with multidimensional scaling analyses to identify the source of spilled oil from highly similar suspected oils.

PubMed

Zhou, Peiyu; Chen, Changshu; Ye, Jianjun; Shen, Wenjie; Xiong, Xiaofei; Hu, Ping; Fang, Hongda; Huang, Chuguang; Sun, Yongge

2015-04-15

Oil fingerprints have been a powerful tool widely used for determining the source of spilled oil. In most cases, this tool works well. However, it is usually difficult to identify the source if the oil spill accident occurs during offshore petroleum exploration due to the highly similar physiochemical characteristics of suspected oils from the same drilling platform. In this report, a case study from the waters of the South China Sea is presented, and multidimensional scaling analysis (MDS) is introduced to demonstrate how oil fingerprints can be combined with mathematical methods to identify the source of spilled oil from highly similar suspected sources. The results suggest that the MDS calculation based on oil fingerprints and subsequently integrated with specific biomarkers in spilled oils is the most effective method with a great potential for determining the source in terms of highly similar suspected oils. Copyright © 2015 Elsevier Ltd. All rights reserved.

Approaches to advancescientific understanding of macrosystems ecology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, Ofir; Ball, Becky; Bond-Lamberty, Benjamin

Macrosystem ecological studies inherently investigate processes that interact across multiple spatial and temporal scales, requiring intensive sampling and massive amounts of data from diverse sources to incorporate complex cross-scale and hierarchical interactions. Inherent challenges associated with these characteristics include high computational demands, data standardization and assimilation, identification of important processes and scales without prior knowledge, and the need for large, cross-disciplinary research teams that conduct long-term studies. Therefore, macrosystem ecology studies must utilize a unique set of approaches that are capable of encompassing these methodological characteristics and associated challenges. Several case studies demonstrate innovative methods used in current macrosystem ecologymore » studies.« less

[A review of pension status quo in China and domestic and overseas pension models].

PubMed

Si, J H; Li, L M

2016-10-10

With the aging of population and progressive decline of traditional pension model, the problems in the aged supporting have caused serious social concern in China. Since 1980' s, different opinions about pension models have been suggested in many research papers. This paper summarizes the characteristics of different pension model used in both China and abroad in terms of the financial sources of the aged supporting, life style and the combination with medical service, suggesting to establish a pension model with Chinese characteristics to provide multiple and personalized services on the basis of China' s national situation and successful experiences of other countries.

Health information needs and preferences in relation to survivorship care plans of long-term cancer survivors in the American Cancer Society's Study of Cancer Survivors-I.

PubMed

Playdon, Mary; Ferrucci, Leah M; McCorkle, Ruth; Stein, Kevin D; Cannady, Rachel; Sanft, Tara; Cartmel, Brenda

2016-08-01

Survivorship care plans (SCPs) provide cancer patients and health care providers with a treatment summary and outline of recommended medical follow-up. Few studies have investigated the information needs and preferred sources among long-term cancer survivors. Cancer survivors of the ten most common cancers enrolled in the longitudinal Study of Cancer Survivors-I (SCS-I) completed a survey 9 years post-diagnosis (n = 3138); at time of diagnosis of the SCS-I cohort, SCPs were not considered usual care. We assessed participants' current desire and preferred sources for information across ten SCP items and evaluated factors associated with information need 9 years after diagnosis. The proportion of long-term cancer survivors endorsing a need for cancer and health information 9 years post-diagnosis ranged from 43 % (cancer screening) to 9 % (consequences of cancer on ability to work). Print media and personalized reading materials were the most preferred information sources. Younger age, higher education, race other than non-Hispanic white, later cancer stage, having breast cancer, having ≥2 comorbidities, and self-reporting poor health were associated with greater informational need (p < 0.05). Long-term cancer survivors continue to report health information needs for most SCP items and would prefer a print format; however, level of need differs by socio-demographic and cancer characteristics. Cancer survivors who did not previously receive a SCP may still benefit from receiving SCP content, and strategies for enabling dissemination to long-term survivors warrant further investigation.

Boron selenide semiconductor detectors for thermal neutron counting

NASA Astrophysics Data System (ADS)

Kargar, Alireza; Tower, Joshua; Cirignano, Leonard; Shah, Kanai

2013-09-01

Thermal neutron detectors in planar configuration were fabricated from B2Se3 (Boron Selenide) crystals grown at RMD Inc. All fabricated semiconductor devices were characterized for the current-voltage (I-V) characteristic and neutron counting measurement. In this study, the resistivity of crystals is reported and the collected pulse height spectra are presented for devices irradiated with the 241AmBe neutron source. Long-term stability of the B2Se3 devices for neutron detection under continuous bias and without being under continuous bias was investigated and the results are reported. The B2Se3 devices showed response to thermal neutrons of the 241AmBe source.

A new design approach for enhancement of DC/RF characteristics with improved ambipolar conduction of charge plasma TFET: proposal, and optimization

NASA Astrophysics Data System (ADS)

Aslam, Mohd.; Sharma, Dheeraj; Yadav, Shivendra; Soni, Deepak; Bajaj, Varun

2018-04-01

This article presents a new device structure to suppress ambipolarity with enhanced electrostatic characteristics of charge plasma TFET (CP-TFET). Here, implantation of a metal angle (MA) of low workfunction inside the high-k dielectric (HfO2) layer near source/channel interface gives excellent improvement in DC and RF characteristics of the proposed device. Deposition of MA is advantageous to increase abruptness of source/channel junction for reducing the tunneling barrier. Along with MA placement, the metal electrode, which is placed over the silicon wafer for inducing N+ drain region, is divided into the two parts of low and high workfunctions. The workfunction of the part of metal electrode near the channel region is taken comparatively higher than the other part to restrict the tunneling of holes at drain/channel junction under negative bias (-V_gs) condition. Such concept induces asymmetrical concentration of charge carriers in the drain region, which widens the tunneling barrier at the drain/channel interface. Consequently, the proposed device shows better RF performance along with suppressed ambipolar conduction. Furthermore, reliability of conventional and proposed structures has been tested in terms of linearity. Simultaneously, the effect of workfunction and length variation of MA on the device characteristics is analyzed in optimization section of the article.

A Characteristics-Based Approach to Radioactive Waste Classification in Advanced Nuclear Fuel Cycles

NASA Astrophysics Data System (ADS)

Djokic, Denia

The radioactive waste classification system currently used in the United States primarily relies on a source-based framework. This has lead to numerous issues, such as wastes that are not categorized by their intrinsic risk, or wastes that do not fall under a category within the framework and therefore are without a legal imperative for responsible management. Furthermore, in the possible case that advanced fuel cycles were to be deployed in the United States, the shortcomings of the source-based classification system would be exacerbated: advanced fuel cycles implement processes such as the separation of used nuclear fuel, which introduce new waste streams of varying characteristics. To be able to manage and dispose of these potential new wastes properly, development of a classification system that would assign appropriate level of management to each type of waste based on its physical properties is imperative. This dissertation explores how characteristics from wastes generated from potential future nuclear fuel cycles could be coupled with a characteristics-based classification framework. A static mass flow model developed under the Department of Energy's Fuel Cycle Research & Development program, called the Fuel-cycle Integration and Tradeoffs (FIT) model, was used to calculate the composition of waste streams resulting from different nuclear fuel cycle choices: two modified open fuel cycle cases (recycle in MOX reactor) and two different continuous-recycle fast reactor recycle cases (oxide and metal fuel fast reactors). This analysis focuses on the impact of waste heat load on waste classification practices, although future work could involve coupling waste heat load with metrics of radiotoxicity and longevity. The value of separation of heat-generating fission products and actinides in different fuel cycles and how it could inform long- and short-term disposal management is discussed. It is shown that the benefits of reducing the short-term fission-product heat load of waste destined for geologic disposal are neglected under the current source-based radioactive waste classification system, and that it is useful to classify waste streams based on how favorable the impact of interim storage is on increasing repository capacity. The need for a more diverse set of waste classes is discussed, and it is shown that the characteristics-based IAEA classification guidelines could accommodate wastes created from advanced fuel cycles more comprehensively than the U.S. classification framework.

Analog performance of vertical nanowire TFETs as a function of temperature and transport mechanism

NASA Astrophysics Data System (ADS)

Martino, Marcio Dalla Valle; Neves, Felipe; Ghedini Der Agopian, Paula; Martino, João Antonio; Vandooren, Anne; Rooyackers, Rita; Simoen, Eddy; Thean, Aaron; Claeys, Cor

2015-10-01

The goal of this work is to study the analog performance of tunnel field effect transistors (TFETs) and its susceptibility to temperature variation and to different dominant transport mechanisms. The experimental input characteristic of nanowire TFETs with different source compositions (100% Si and Si1-xGex) has been presented, leading to the extraction of the Activation Energy for each bias condition. These first results have been connected to the prevailing transport mechanism for each configuration, namely band-to-band tunneling (BTBT) or trap assisted tunneling (TAT). Afterward, this work analyzes the analog behavior, with the intrinsic voltage gain calculated in terms of Early voltage, transistor efficiency, transconductance and output conductance. Comparing the results for devices with different source compositions, it is interesting to note how the analog trends vary depending on the source characteristics and the prevailing transport mechanisms. This behavior results in a different suitability analysis depending on the working temperature. In other words, devices with full-Silicon source and non-abrupt junction profile present the worst intrinsic voltage gain at room temperature, but the best results for high temperatures. This was possible since, among the 4 studied devices, this configuration was the only one with a positive intrinsic voltage gain dependence on the temperature variation.

A study on prevention of an electric discharge at an extraction electrode of an electron cyclotron resonance ion source for cancer therapy.

PubMed

Kishii, Y; Kawasaki, S; Kitagawa, A; Muramatsu, M; Uchida, T

2014-02-01

A compact ECR ion source has utilized for carbon radiotherapy. In order to increase beam intensity with higher electric field at the extraction electrode and be better ion supply stability for long periods, electric geometry and surface conditions of an extraction electrode have been studied. Focusing attention on black deposited substances on the extraction electrode, which were observed around the extraction electrode after long-term use, the relation between black deposited substances and the electrical insulation property is investigated. The black deposited substances were inspected for the thickness of deposit, surface roughness, structural arrangement examined using Raman spectroscopy, and characteristics of electric discharge in a test bench, which was set up to simulate the ECR ion source.

Effects of topography and crustal heterogeneities on the source estimation of LP event at Kilauea volcano

USGS Publications Warehouse

Cesca, S.; Battaglia, J.; Dahm, T.; Tessmer, E.; Heimann, S.; Okubo, P.

2008-01-01

The main goal of this study is to improve the modelling of the source mechanism associated with the generation of long period (LP) signals in volcanic areas. Our intent is to evaluate the effects that detailed structural features of the volcanic models play in the generation of LP signal and the consequent retrieval of LP source characteristics. In particular, effects associated with the presence of topography and crustal heterogeneities are here studied in detail. We focus our study on a LP event observed at Kilauea volcano, Hawaii, in 2001 May. A detailed analysis of this event and its source modelling is accompanied by a set of synthetic tests, which aim to evaluate the effects of topography and the presence of low velocity shallow layers in the source region. The forward problem of Green's function generation is solved numerically following a pseudo-spectral approach, assuming different 3-D models. The inversion is done in the frequency domain and the resulting source mechanism is represented by the sum of two time-dependent terms: a full moment tensor and a single force. Synthetic tests show how characteristic velocity structures, associated with shallow sources, may be partially responsible for the generation of the observed long-lasting ringing waveforms. When applying the inversion technique to Kilauea LP data set, inversions carried out for different crustal models led to very similar source geometries, indicating a subhorizontal cracks. On the other hand, the source time function and its duration are significantly different for different models. These results support the indication of a strong influence of crustal layering on the generation of the LP signal, while the assumption of homogeneous velocity model may bring to misleading results. ?? 2008 The Authors Journal compilation ?? 2008 RAS.

Observed ground-motion variabilities and implication for source properties

NASA Astrophysics Data System (ADS)

Cotton, F.; Bora, S. S.; Bindi, D.; Specht, S.; Drouet, S.; Derras, B.; Pina-Valdes, J.

2016-12-01

One of the key challenges of seismology is to be able to calibrate and analyse the physical factors that control earthquake and ground-motion variabilities. Within the framework of empirical ground-motion prediction equation (GMPE) developments, ground-motions residuals (differences between recorded ground motions and the values predicted by a GMPE) are computed. The exponential growth of seismological near-field records and modern regression algorithms allow to decompose these residuals into between-event and a within-event residual components. The between-event term quantify all the residual effects of the source (e.g. stress-drops) which are not accounted by magnitude term as the only source parameter of the model. Between-event residuals provide a new and rather robust way to analyse the physical factors that control earthquake source properties and associated variabilities. We first will show the correlation between classical stress-drops and between-event residuals. We will also explain why between-event residuals may be a more robust way (compared to classical stress-drop analysis) to analyse earthquake source-properties. We will finally calibrate between-events variabilities using recent high-quality global accelerometric datasets (NGA-West 2, RESORCE) and datasets from recent earthquakes sequences (Aquila, Iquique, Kunamoto). The obtained between-events variabilities will be used to evaluate the variability of earthquake stress-drops but also the variability of source properties which cannot be explained by a classical Brune stress-drop variations. We will finally use the between-event residual analysis to discuss regional variations of source properties, differences between aftershocks and mainshocks and potential magnitude dependencies of source characteristics.

Final design of thermal diagnostic system in SPIDER ion source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brombin, M., E-mail: matteo.brombin@igi.cnr.it; Dalla Palma, M.; Pasqualotto, R.

The prototype radio frequency source of the ITER heating neutral beams will be first tested in SPIDER test facility to optimize H{sup −} production, cesium dynamics, and overall plasma characteristics. Several diagnostics will allow to fully characterise the beam in terms of uniformity and divergence and the source, besides supporting a safe and controlled operation. In particular, thermal measurements will be used for beam monitoring and system protection. SPIDER will be instrumented with mineral insulated cable thermocouples, both on the grids, on other components of the beam source, and on the rear side of the beam dump water cooled elements.more » This paper deals with the final design and the technical specification of the thermal sensor diagnostic for SPIDER. In particular the layout of the diagnostic, together with the sensors distribution in the different components, the cables routing and the conditioning and acquisition cubicles are described.« less

Final design of thermal diagnostic system in SPIDER ion source

NASA Astrophysics Data System (ADS)

Brombin, M.; Dalla Palma, M.; Pasqualotto, R.; Pomaro, N.

2016-11-01

The prototype radio frequency source of the ITER heating neutral beams will be first tested in SPIDER test facility to optimize H- production, cesium dynamics, and overall plasma characteristics. Several diagnostics will allow to fully characterise the beam in terms of uniformity and divergence and the source, besides supporting a safe and controlled operation. In particular, thermal measurements will be used for beam monitoring and system protection. SPIDER will be instrumented with mineral insulated cable thermocouples, both on the grids, on other components of the beam source, and on the rear side of the beam dump water cooled elements. This paper deals with the final design and the technical specification of the thermal sensor diagnostic for SPIDER. In particular the layout of the diagnostic, together with the sensors distribution in the different components, the cables routing and the conditioning and acquisition cubicles are described.

Effect of defect creation and migration on hump characteristics of a-InGaZnO thin film transistors under long-term drain bias stress with light illumination

NASA Astrophysics Data System (ADS)

Cho, Yong-Jung; Kim, Woo-Sic; Lee, Yeol-Hyeong; Park, Jeong Ki; Kim, Geon Tae; Kim, Ohyun

2018-06-01

We investigated the mechanism of formation of the hump that occurs in the current-voltage I-V characteristics of amorphous InGaZnO (a-IGZO) thin film transistors (TFTs) that are exposed to long-term drain bias stress under illumination. Transfer characteristics showed two-stage degradation under the stress. At the beginning of the stress, the I-V characteristics shifted in the negative direction with a degradation of subthreshold slope, but the hump phenomenon developed over time in the I-V characteristics. The development of the hump was related to creation of defects, especially ionized oxygen vacancies which act as shallow donor-like states near the conduction-band minimum in a-IGZO. To further investigate the hump phenomenon we measured a capacitance-voltage C-V curve and performed two-dimensional device simulation. Stretched-out C-V for the gate-to-drain capacitance and simulated electric field distribution which exhibited large electric field near the drain side of TFT indicated that VO2+ were generated near the drain side of TFT, but the hump was not induced when VO2+ only existed near the drain side. Therefore, the degradation behavior under DBITS occurred because VO2+ were created near the drain side, then were migrated to the source side of the TFT.

A systematic review of administrative and clinical databases of infants admitted to neonatal units.

PubMed

Statnikov, Yevgeniy; Ibrahim, Buthaina; Modi, Neena

2017-05-01

High quality information, increasingly captured in clinical databases, is a useful resource for evaluating and improving newborn care. We conducted a systematic review to identify neonatal databases, and define their characteristics. We followed a preregistered protocol using MesH terms to search MEDLINE, EMBASE, CINAHL, Web of Science and OVID Maternity and Infant Care Databases for articles identifying patient level databases covering more than one neonatal unit. Full-text articles were reviewed and information extracted on geographical coverage, criteria for inclusion, data source, and maternal and infant characteristics. We identified 82 databases from 2037 publications. Of the country-specific databases there were 39 regional and 39 national. Sixty databases restricted entries to neonatal unit admissions by birth characteristic or insurance cover; 22 had no restrictions. Data were captured specifically for 53 databases; 21 administrative sources; 8 clinical sources. Two clinical databases hold the largest range of data on patient characteristics, USA's Pediatrix BabySteps Clinical Data Warehouse and UK's National Neonatal Research Database. A number of neonatal databases exist that have potential to contribute to evaluating neonatal care. The majority is created by entering data specifically for the database, duplicating information likely already captured in other administrative and clinical patient records. This repetitive data entry represents an unnecessary burden in an environment where electronic patient records are increasingly used. Standardisation of data items is necessary to facilitate linkage within and between countries. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Coppicing evaluation of short rotation coppice in the southeast of the U.S. to determine appropriate harvesting methods.

Treesearch

Rafael Santiago; Tom Gallagher; Matthew Smidt; Dana Mitchell

2016-01-01

Renewable fuels are being tested as an alternative for fossil fuels. For the Southeast U.S., the use of woody biomass has proven to be an excellent source of renewable energy in terms of cost benefit and availability. Short rotation woody crops (SRWC) are timber plantations with exclusive characteristics that can meet the intensive demand for wood due to their fast...

Acoustic constituents of prosodic typology

NASA Astrophysics Data System (ADS)

Komatsu, Masahiko

Different languages sound different, and considerable part of it derives from the typological difference of prosody. Although such difference is often referred to as lexical accent types (stress accent, pitch accent, and tone; e.g. English, Japanese, and Chinese respectively) and rhythm types (stress-, syllable-, and mora-timed rhythms; e.g. English, Spanish, and Japanese respectively), it is unclear whether these types are determined in terms of acoustic properties, The thesis intends to provide a potential basis for the description of prosody in terms of acoustics. It argues for the hypothesis that the source component of the source-filter model (acoustic features) approximately corresponds to prosody (linguistic features) through several experimental-phonetic studies. The study consists of four parts. (1) Preliminary experiment: Perceptual language identification tests were performed using English and Japanese speech samples whose frequency spectral information (i.e. non-source component) is heavily reduced. The results indicated that humans can discriminate languages with such signals. (2) Discussion on the linguistic information that the source component contains: This part constitutes the foundation of the argument of the thesis. Perception tests of consonants with the source signal indicated that the source component carries the information on broad categories of phonemes that contributes to the creation of rhythm. (3) Acoustic analysis: The speech samples of Chinese, English, Japanese, and Spanish, differing in prosodic types, were analyzed. These languages showed difference in acoustic characteristics of the source component. (4) Perceptual experiment: A language identification test for the above four languages was performed using the source signal with its acoustic features parameterized. It revealed that humans can discriminate prosodic types solely with the source features and that the discrimination is easier as acoustic information increases. The series of studies showed the correspondence of the source component to prosodic features. In linguistics, prosodic types have not been discussed purely in terms of acoustics; they are usually related to the function of prosody or phonological units such as phonemes. The present thesis focuses on acoustics and makes a contribution to establishing the crosslinguistic description system of prosody.

Annual Rates on Seismogenic Italian Sources with Models of Long-Term Predictability for the Time-Dependent Seismic Hazard Assessment In Italy

NASA Astrophysics Data System (ADS)

Murru, Maura; Falcone, Giuseppe; Console, Rodolfo

2016-04-01

The present study is carried out in the framework of the Center for Seismic Hazard (CPS) INGV, under the agreement signed in 2015 with the Department of Civil Protection for developing a new model of seismic hazard of the country that can update the current reference (MPS04-S1; zonesismiche.mi.ingv.it and esse1.mi.ingv.it) released between 2004 and 2006. In this initiative, we participate with the Long-Term Stress Transfer (LTST) Model to provide the annual occurrence rate of a seismic event on the entire Italian territory, from a Mw4.5 minimum magnitude, considering bins of 0.1 magnitude units on geographical cells of 0.1° x 0.1°. Our methodology is based on the fusion of a statistical time-dependent renewal model (Brownian Passage Time, BPT, Matthews at al., 2002) with a physical model which considers the permanent effect in terms of stress that undergoes a seismogenic source in result of the earthquakes that occur on surrounding sources. For each considered catalog (historical, instrumental and individual seismogenic sources) we determined a distinct rate value for each cell of 0.1° x 0.1° for the next 50 yrs. If the cell falls within one of the sources in question, we adopted the respective value of rate, which is referred only to the magnitude of the event characteristic. This value of rate is divided by the number of grid cells that fall on the horizontal projection of the source. If instead the cells fall outside of any seismic source we considered the average value of the rate obtained from the historical and the instrumental catalog, using the method of Frankel (1995). The annual occurrence rate was computed for any of the three considered distributions (Poisson, BPT and BPT with inclusion of stress transfer).

Rockfall hazard analysis using LiDAR and spatial modeling

NASA Astrophysics Data System (ADS)

Lan, Hengxing; Martin, C. Derek; Zhou, Chenghu; Lim, Chang Ho

2010-05-01

Rockfalls have been significant geohazards along the Canadian Class 1 Railways (CN Rail and CP Rail) since their construction in the late 1800s. These rockfalls cause damage to infrastructure, interruption of business, and environmental impacts, and their occurrence varies both spatially and temporally. The proactive management of these rockfall hazards requires enabling technologies. This paper discusses a hazard assessment strategy for rockfalls along a section of a Canadian railway using LiDAR and spatial modeling. LiDAR provides accurate topographical information of the source area of rockfalls and along their paths. Spatial modeling was conducted using Rockfall Analyst, a three dimensional extension to GIS, to determine the characteristics of the rockfalls in terms of travel distance, velocity and energy. Historical rockfall records were used to calibrate the physical characteristics of the rockfall processes. The results based on a high-resolution digital elevation model from a LiDAR dataset were compared with those based on a coarse digital elevation model. A comprehensive methodology for rockfall hazard assessment is proposed which takes into account the characteristics of source areas, the physical processes of rockfalls and the spatial attribution of their frequency and energy.

Farmers' Willingness to Adopt Conservation Agriculture: New Evidence from Lebanon.

PubMed

Chalak, Ali; Irani, Alexandra; Chaaban, Jad; Bashour, Issam; Seyfert, Karin; Smoot, Kaitlyn; Abebe, Gumataw Kifle

2017-10-01

With increasing food insecurity and climate change, conservation agriculture has emerged as a sustainable alternative to intensive conventional agriculture as a source of food supply. Yet the adoption rate of conservation agriculture is still low. Our paper analyses the factors affecting farmers' willingness to adopt conservation agriculture in Lebanon. The findings show that household characteristics-years of farming and farm size affect conservation agriculture adoption. However, household characteristics alone were insufficient to explain conservation agriculture adoption. We found that farming experience, information sources, frequency of irrigation, and severity of weed infestation in the past, participation in specific trainings, and farmers' perception about the long-term impact of conservation agriculture, were key determinants of conservation agriculture adoption. Our paper encourages policymakers to invest in conservation agriculture to overcome food insecurity and environmental changes affecting food systems in the Middle East. The paper also informs agribusiness firms to view conservation agriculture as a viable alternative to strengthen their business relationship with farmers in arid and semi-arid regions.

Rupture, waves and earthquakes.

PubMed

Uenishi, Koji

2017-01-01

Normally, an earthquake is considered as a phenomenon of wave energy radiation by rupture (fracture) of solid Earth. However, the physics of dynamic process around seismic sources, which may play a crucial role in the occurrence of earthquakes and generation of strong waves, has not been fully understood yet. Instead, much of former investigation in seismology evaluated earthquake characteristics in terms of kinematics that does not directly treat such dynamic aspects and usually excludes the influence of high-frequency wave components over 1 Hz. There are countless valuable research outcomes obtained through this kinematics-based approach, but "extraordinary" phenomena that are difficult to be explained by this conventional description have been found, for instance, on the occasion of the 1995 Hyogo-ken Nanbu, Japan, earthquake, and more detailed study on rupture and wave dynamics, namely, possible mechanical characteristics of (1) rupture development around seismic sources, (2) earthquake-induced structural failures and (3) wave interaction that connects rupture (1) and failures (2), would be indispensable.

Rupture, waves and earthquakes

PubMed Central

UENISHI, Koji

2017-01-01

Normally, an earthquake is considered as a phenomenon of wave energy radiation by rupture (fracture) of solid Earth. However, the physics of dynamic process around seismic sources, which may play a crucial role in the occurrence of earthquakes and generation of strong waves, has not been fully understood yet. Instead, much of former investigation in seismology evaluated earthquake characteristics in terms of kinematics that does not directly treat such dynamic aspects and usually excludes the influence of high-frequency wave components over 1 Hz. There are countless valuable research outcomes obtained through this kinematics-based approach, but “extraordinary” phenomena that are difficult to be explained by this conventional description have been found, for instance, on the occasion of the 1995 Hyogo-ken Nanbu, Japan, earthquake, and more detailed study on rupture and wave dynamics, namely, possible mechanical characteristics of (1) rupture development around seismic sources, (2) earthquake-induced structural failures and (3) wave interaction that connects rupture (1) and failures (2), would be indispensable. PMID:28077808

The excitation and characteristic frequency of the long-period volcanic event: An approach based on an inhomogeneous autoregressive model of a linear dynamic system

USGS Publications Warehouse

Nakano, M.; Kumagai, H.; Kumazawa, M.; Yamaoka, K.; Chouet, B.A.

1998-01-01

We present a method to quantify the source excitation function and characteristic frequencies of long-period volcanic events. The method is based on an inhomogeneous autoregressive (AR) model of a linear dynamic system, in which the excitation is assumed to be a time-localized function applied at the beginning of the event. The tail of an exponentially decaying harmonic waveform is used to determine the characteristic complex frequencies of the event by the Sompi method. The excitation function is then derived by operating an AR filter constructed from the characteristic frequencies to the entire seismogram of the event, including the inhomogeneous part of the signal. We apply this method to three long-period events at Kusatsu-Shirane Volcano, central Japan, whose waveforms display simple decaying monochromatic oscillations except for the beginning of the events. We recover time-localized excitation functions lasting roughly 1 s at the start of each event and find that the estimated functions are very similar to each other at all the stations of the seismic network for each event. The phases of the characteristic oscillations referred to the estimated excitation function fall within a narrow range for almost all the stations. These results strongly suggest that the excitation and mode of oscillation are both dominated by volumetric change components. Each excitation function starts with a pronounced dilatation consistent with a sudden deflation of the volumetric source which may be interpreted in terms of a choked-flow transport mechanism. The frequency and Q of the characteristic oscillation both display a temporal evolution from event to event. Assuming a crack filled with bubbly water as seismic source for these events, we apply the Van Wijngaarden-Papanicolaou model to estimate the acoustic properties of the bubbly liquid and find that the observed changes in the frequencies and Q are consistently explained by a temporal change in the radii of the bubbles characterizing the bubbly water in the crack.

Long-Term Cultured Human Term Placenta-Derived Mesenchymal Stem Cells of Maternal Origin Displays Plasticity

PubMed Central

Sabapathy, Vikram; Ravi, Saranya; Srivastava, Vivi; Srivastava, Alok; Kumar, Sanjay

2012-01-01

Mesenchymal stem cells (MSCs) are an alluring therapeutic resource because of their plasticity, immunoregulatory capacity and ease of availability. Human BM-derived MSCs have limited proliferative capability, consequently, it is challenging to use in tissue engineering and regenerative medicine applications. Hence, placental MSCs of maternal origin, which is one of richest sources of MSCs were chosen to establish long-term culture from the cotyledons of full-term human placenta. Flow analysis established bonafied MSCs phenotypic characteristics, staining positively for CD29, CD73, CD90, CD105 and negatively for CD14, CD34, CD45 markers. Pluripotency of the cultured MSCs was assessed by in vitro differentiation towards not only intralineage cells like adipocytes, osteocytes, chondrocytes, and myotubules cells but also translineage differentiated towards pancreatic progenitor cells, neural cells, and retinal cells displaying plasticity. These cells did not significantly alter cell cycle or apoptosis pattern while maintaining the normal karyotype; they also have limited expression of MHC-II antigens and are Naive for stimulatory factors CD80 and CD 86. Further soft agar assays revealed that placental MSCs do not have the ability to form invasive colonies. Taking together all these characteristics into consideration, it indicates that placental MSCs could serve as good candidates for development and progress of stem-cell based therapeutics. PMID:22550499

Gamma Radiation from PSR B1055-52

NASA Technical Reports Server (NTRS)

Thompson, D. J.; Bailes, M.; Bertsch, D. L.; Cordes, J.; DAmico, N. D.; Esposito, J. A.; Finley, J.; Hartman, R. C.; Hermsen, W.; Kanbach, G.;

Gamma Radiation from PSR B1055-52

NASA Technical Reports Server (NTRS)

Thompson, D. J.; Bailes, M.; Bertsch, D. L.; Cordes, J.; DAmico, N.; Esposito, J. A.; Finley, J.; Hartman, R. C.; Hermsen, W.; Kanbach, G.;

Energy performance of a ventilation system for a block of apartments with a ground source heat pump as generation system

NASA Astrophysics Data System (ADS)

Lucchi, M.; Lorenzini, M.; Valdiserri, P.

2017-01-01

This work presents a numerical simulation of the annual performance of two different systems: a traditional one composed by a gas boiler-chiller pair and one consisting of a ground source heat pump (GSHP) both coupled to two thermal storage tanks. The systems serve a bloc of flats located in northern Italy and are assessed over a typical weather year, covering both the heating and cooling seasons. The air handling unit (AHU) coupled with the GSHP exhibits excellent characteristics in terms of temperature control, and has high performance parameters (EER and COP), which make conduction costs about 30% lower than those estimated for the traditional plant.

A study of the variable impedance surface concept as a means for reducing noise from jet interaction with deployed lift-augmenting flaps

NASA Technical Reports Server (NTRS)

Hayden, R. E.; Kadman, Y.; Chanaud, R. C.

1972-01-01

The feasibility of quieting the externally-blown-flap (EBF) noise sources which are due to interaction of jet exhaust flow with deployed flaps was demonstrated on a 1/15-scale 3-flap EBF model. Sound field characteristics were measured and noise reduction fundamentals were reviewed in terms of source models. Test of the 1/15-scale model showed broadband noise reductions of up to 20 dB resulting from combination of variable impedance flap treatment and mesh grids placed in the jet flow upstream of the flaps. Steady-state lift, drag, and pitching moment were measured with and without noise reduction treatment.

THE MULTI-WAVELENGTH CHARACTERISTICS OF THE TeV BINARY LS I+61°303

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saha, L.; Chitnis, V. R.; Shukla, A.

2016-06-01

We study the characteristics of the TeV binary LS I+61°303 in radio, soft X-ray, hard X-ray, and gamma-ray (GeV and TeV) energies. The long-term variability characteristics are examined as a function of the phase of the binary period of 26.496 days as well as the phase of the superorbital period of 1626 days, dividing the observations into a matrix of 10 × 10 phases of these two periods. We find that the long-term variability can be described by a sine function of the superorbital period, with the phase and amplitude systematically varying with the binary period phase. We also findmore » a definite wavelength-dependent change in this variability description. To understand the radiation mechanism, we define three states in the orbital/superorbital phase matrix and examine the wideband spectral energy distribution. The derived source parameters indicate that the emission geometry is dominated by a jet structure showing a systematic variation with the orbital/superorbital period. We suggest that LS I+61°303 is likely a microquasar with a steady jet.« less

Heavy metals in urban soils of East St. Louis, IL. Part II: Leaching characteristics and modeling.

PubMed

Kaminski, M D; Landsberger, S

2000-09-01

The city of East St. Louis, IL, has a history of abundant industrial activities including smelters of ferrous and non-ferrous metals, a coal-fired power plant, companies that produced organic and inorganic chemicals, and petroleum refineries. Following a gross assessment of heavy metals in the community soils (see Part I of this two-part series), leaching tests were performed on specific soils to elucidate heavy metal-associated mineral fractions and general leachability. Leaching experiments, including the Toxicity Characteristic Leaching Procedure (TLCP) and column tests, and sequential extractions, illustrated the low leachability of metals in East St. Louis soils. The column leachate results were modeled using a formulation developed for fly ash leaching. The importance of instantaneous dissolution was evident from the model. By incorporating desorption/adsorption terms into the source term, the model was adapted very well to the time-dependent heavy metal leachate concentrations. The results demonstrate the utility of a simple model to describe heavy metal leaching from contaminated soils.

Heavy Metals in Urban Soils of East St. Louis, IL Part II: Leaching Characteristics and Modeling.

PubMed

Kaminski, Michael D; Landsberger, Sheldon

2000-09-01

The city of East St. Louis, IL, has a history of abundant industrial activities including smelters of ferrous and non-ferrous metals, a coal-fired power plant, companies that produced organic and inorganic chemicals, and petroleum refineries. Following a gross assessment of heavy metals in the community soils (see Part I of this two-part series), leaching tests were performed on specific soils to elucidate heavy metal-associated mineral fractions and general leachability. Leaching experiments, including the Toxicity Characteristic Leaching Procedure (TLCP) and column tests, and sequential extractions, illustrated the low leachability of metals in East St. Louis soils. The column leachate results were modeled using a formulation developed for fly ash leaching. The importance of instantaneous dissolution was evident from the model. By incorporating desorption/adsorption terms into the source term, the model was adapted very well to the time-dependent heavy metal leachate concentrations. The results demonstrate the utility of a simple model to describe heavy metal leaching from contaminated soils.

Target Signature Analysis Center: Data Compilation. Eleventh Supplement. Volume 1. Bidirectional Reflectance: Definition, Discussion, and Utilization

DTIC Science & Technology

1972-10-01

description of the important experi- mental conditions. iii CONTENTS 1. Introduction .... .. ... .. ... ... ..... ... .. ... ... I 2. Bidirectional Reflectance...contribute to received power. Case III : Laser Source Not Arranged Coaxially with a Receiver If the terms used to develop Eq. (171 are rewritten with...Lr(ur, r)1 , Involves a 4-by -4,16-elerment Mueller natr Lx (Ref. 9). That Is, a coiplete bpvc - ificatLion of the polarization characteristics of

Localized Enzymatic Degradation of Polymers: Physics and Scaling Laws

NASA Astrophysics Data System (ADS)

Lalitha Sridhar, Shankar; Vernerey, Franck

2018-03-01

Biodegradable polymers are naturally abundant in living matter and have led to great advances in controlling environmental pollution due to synthetic polymer products, harnessing renewable energy from biofuels, and in the field of biomedicine. One of the most prevalent mechanisms of biodegradation involves enzyme-catalyzed depolymerization by biological agents. Despite numerous studies dedicated to understanding polymer biodegradation in different environments, a simple model that predicts the macroscopic behavior (mass and structural loss) in terms of microphysical processes (enzyme transport and reaction) is lacking. An interesting phenomenon occurs when an enzyme source (released by a biological agent) attacks a tight polymer mesh that restricts free diffusion. A fuzzy interface separating the intact and fully degraded polymer propagates away from the source and into the polymer as the enzymes diffuse and react in time. Understanding the characteristics of this interface will provide crucial insight into the biodegradation process and potential ways to precisely control it. In this work, we present a centrosymmetric model of biodegradation by characterizing the moving fuzzy interface in terms of its speed and width. The model predicts that the characteristics of this interface are governed by two time scales, namely the polymer degradation and enzyme transport times, which in turn depend on four main polymer and enzyme properties. A key finding of this work is simple scaling laws that can be used to guide biodegradation of polymers in different applications.

Land subsidence due to groundwater pumping and recharge: considering the particle-deposition effect in ground-source heat-pump engineering

NASA Astrophysics Data System (ADS)

Cui, Xianze; Liu, Quansheng; Zhang, Chengyuan; Huang, Yisheng; Fan, Yong; Wang, Hongxing

2018-05-01

With the rapid development and use of ground-source heat-pump (GSHP) systems in China, it has become imperative to research the effects of associated long-term pumping and recharge processes on ground deformation. During groundwater GSHP operation, small particles can be transported and deposited, or they can become detached in the grain skeleton and undergo recombination, possibly causing a change in the ground structure and characteristics. This paper presents a mathematical ground-deformation model that considers particle transportation and deposition in porous media based on the geological characteristics of a dual-structure stratum in Wuhan, eastern China. Thermal effects were taken into consideration because the GSHP technology used involves a device that uses heat from a shallow layer of the ground. The results reveal that particle deposition during the long-term pumping and recharge process has had an impact on ground deformation that has significantly increased over time. In addition, there is a strong correlation between the deformation change (%) and the amount of particle deposition. The position of the maximum deformation change is also the location where most of the particles are deposited, with the deformation change being as high as 43.3%. The analyses also show that flow of groundwater can have an effect on the ground deformation process, but the effect is very weak.

Results of Long-Term Monitoring of Maser Emission in the Star-forming Region G 10.623-0.383

NASA Astrophysics Data System (ADS)

Colom, P.; Lekht, E. E.; Pashchenko, M. I.; Rudnitskii, G. M.; Tolmachev, A. M.

2017-12-01

The results of a study of the maser source G 10.623-0.383 in the λ = 1.35 cm H2O line using the 22-mradio telescope of the Pushchino Radio AstronomyObservatory (Russia) and in the main hydroxyl lines (λ = 18 cm) using the Nançay Radio Telescope (France) are presented. Uncorrelated long-term variations of the integrated intensities and the velocity centroids with characteristic times of 11 yrs (mean value) and 32 yrs, respectively, are studied. The drift of the velocity centroid may be associated with maser condensations whose material is collapsing onto the OB cluster. It is shown that the H2O maser source contains maser condensation configurations on various scales over a long time, which evolve with time. OH maser emission was only detected in the main lines at 1665 and 1667 MHz. The flux densities of the strongest emission components were variable, but their radial velocities did not change. A Zeeman pair was found at 1667 MHz with a splitting of about 1.44 km/s, corresponding to a line-of-sight magnetic field of 4.1 mG, which was preserved over at least 25 years. The characteristics of the H2O andOHmaser variability suggests that the masers are located in different parts of G 10.623-0.383.

Organic acids, sugars, vitamin C content and some pomological characteristics of eleven hawthorn species (Crataegus spp.) from Turkey.

PubMed

Gundogdu, Muttalip; Ozrenk, Koray; Ercisli, Sezai; Kan, Tuncay; Kodad, Ossama; Hegedus, Attila

2014-05-30

The Hawthorn (Crateagus sp.) mostly occurs around the temperate region of the world with a high number of species, producing a fruit with numerous beneficial effects for human health. The aim of the study was to determine organic acid and sugar contents in the fruit of a number of hawthorn species grown in Erzincan province of Turkey. Citric acid was the predominant organic acid in all hawthorn species and C. pseudoheterophylla had the highest citric acid content (23.688 g/100 g). There were not statistically significant differences among hawthorn species (except C. atrosanguinea Pojark) in terms of fumaric acid content. C.pontica C.Koch had a higher content of vitamin C (9.418 mg/100 g) compared to other species. Fructose was the predominant sugar component in all species and C. monogyna subsp. monogyna Joiq had the highest fructose content (18.378 g/100 g). The high fruit quality of the studied species indicates the importance of this fruit in human nutrition as a natural source. The study revealed that there were differences in terms of fruit characteristics among hawthorn species and thus better quality hawthorn genotypes can be selected within the species. Hence, this study is considered to be a valuable reference for forthcoming studies. The high fruit quality of the studied species indicates the importance of this fruit in human nutrition as a natural source.

Rare observation of daytime whistlers at very low latitude (L = 1.08)

NASA Astrophysics Data System (ADS)

Gokani, Sneha A.; Singh, Rajesh; Tulasi Ram, S.; Venkatesham, K.; Veenadhari, B.; Kumar, Sandeep; Selvakumaran, R.

2018-04-01

The source region and propagation mechanism of low latitude whistlers (Geomag. lat. <30°) have puzzled scientific community for last many decades. In view of recent reports, there is consensus on the source region of low latitude whistlers in the vicinity of the conjugate point. But the plausible conditions of ionospheric medium through which they travel are still uncertain. In addition to that, the whistlers in daytime are never observed at geomagnetic latitudes less than 20°. Here, for the first time, we present a rare observations of whistlers during sunlit hours from a very low-latitude station Allahabad (Geomag. Lat: 16.79°N, L = 1.08) in India on 04 February 2011. More than 90 whistlers are recorded during 1200-1300 UT during which the whole propagation path from lightning source region to whistler observation site is under sunlit. The favorable factors that facilitated the whistlers prior to the sunset are investigated in terms of source lightning characteristics, geomagnetic and background ionospheric medium conditions. The whistler activity period was found to be geomagnetically quiet. However, a significant suppression in ionospheric total electron content (TEC) compared to its quiet day average is found. This shows that background ionospheric conditions may play a key role in low latitude whistler propagation. This study reveals that whistlers can occur under sunlit hours at latitudes as low as L = 1.08 when the source lightning and ionospheric medium characteristics are optimally favorable.

Flavobacterium sepsis outbreak due to contaminated distilled water in a neonatal intensive care unit.

PubMed

Mosayebi, Z; Movahedian, A H; Soori, T

2011-07-01

Outbreaks of sepsis due to water or contaminated equipment can cause significant mortality and morbidity in neonatal intensive care units. We studied an outbreak among neonates caused by flavobacterium and investigated the characteristics of the infected neonates, antimicrobial susceptibilities, and the source of the outbreak. Forty-five neonates with documented flavobacterium sepsis were evaluated in this descriptive study. Data including sex, vaginal delivery or caesarean, preterm or term, birth weight, results of blood cultures and antibiograms were recorded and cases followed up until death or recovery. Environmental sampling for detecting the source of contamination was performed. Among the 45 patients, 28 (62.2%) were male and 17 (37.8%) female (P<0.001). The commonest clinical manifestation was respiratory distress (60%). Eighteen neonates (40%) were low birth weight. Thirty-seven neonates (82.2%) were born via caesarean section. Twenty (44.4%) of them were preterm whereas 25 (55.6%) were term (P<0.001). Mortality was 17.7%. All strains were resistant to ampicillin, and susceptible to amikacin. The source of outbreak was contaminated distilled water. Copyright © 2010 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Study of RCR Catalogue Radio Source Integral Spectra

NASA Astrophysics Data System (ADS)

Zhelenkova, O. P.; Majorova, E. K.

2018-04-01

We present the characteristics of the sources found on the averaged scans of the "Cold" experiment 1980-1999 surveys in the right-ascension interval 2h< RA < 7h. Thereby, a refinement of the parameters of the RC catalog sources (RATANCold) for this interval is complete. To date, the RCR catalog (RATAN Cold Refined) covers the right-ascension interval 2h< RA < 17h and includes 830 sources. The spectra are built for them with the use of new data in the range of 70-230 MHz. The dependence between the spectral indices α 0.5, α 3.94 and integral flux density at the frequencies of 74 and 150 MHz, at 1.4, 3.94 and 4.85 GHz is discussed.We found that at 150 MHz in most sources the spectral index α 0.5 gets steeper with increasing flux density. In general, the sources with flat spectra are weaker in terms of flux density than the sources with steep spectra, which especially differs at 150 MHz. We believe that this is due to the brightness of their extended components, which can be determined by the type of accretion and the neighborhood of the source.

Role of large-scale motions to turbulent inertia in turbulent pipe and channel flows

NASA Astrophysics Data System (ADS)

Hwang, Jinyul; Lee, Jin; Sung, Hyung Jin

2015-11-01

The role of large-scale motions (LSMs) to the turbulent inertia (TI) term (the wall-normal gradient of the Reynolds shear stress) is examined in turbulent pipe and channel flows at Reτ ~ 930 . The TI term in the mean momentum equation represents the net force of inertia exerted by the Reynolds shear stress. Although the turbulence statistics characterizing the internal turbulent flows are similar close to the wall, the TI term differs in the logarithmic region due to the different characteristics of LSMs (λx > 3 δ) . The contribution of the LSMs to the TI term and the Reynolds shear stress in the channel flow is larger than that in the pipe flow. The LSMs in the logarithmic region act like a mean momentum source (where TI >0) even the TI profile is negative above the peak of the Reynolds shear stress. The momentum sources carried by the LSMs are related to the low-speed regions elongated in the downstream, revealing that momentum source-like motions occur in the upstream position of the low-speed structure. The streamwise extent of this structure is relatively long in the channel flow, whereas the high-speed regions on the both sides of the low-speed region in the channel flow are shorter and weaker than those in the pipe flow. This work was supported by the Creative Research Initiatives (No. 2015-001828) program of the National Research Foundation of Korea (MSIP) and partially supported by KISTI under the Strategic Supercomputing Support Program.

Characteristics of sources and sinks of momentum in a turbulent boundary layer

NASA Astrophysics Data System (ADS)

Fiscaletti, D.; Ganapathisubramani, B.

2018-05-01

In turbulent boundary layers, the wall-normal gradient of the Reynolds shear stress identifies momentum sources and sinks (T =∂ [-u v ]/∂ y ). These motions can be physically interpreted in two ways: (1) as contributors to the turbulence term balancing the mean momentum equation, and (2) as regions of strong local interaction between velocity and vorticity fluctuations. In this paper, the space-time evolution of momentum sources and sinks is investigated in a turbulent boundary layer at the Reynolds number (Reτ) = 2700, with time-resolved planar particle image velocimetry in a plane along the streamwise and wall-normal directions. Wave number-frequency power spectra of T fluctuations reveal that the wave velocities of momentum sources and sinks tend to match the local streamwise velocity in proximity to the wall. However, as the distance from the wall increases, the wave velocities of the T events are slightly lower than the local streamwise velocities of the flow, which is also confirmed from the tracking in time of the intense momentum sources and sinks. This evidences that momentum sources and sinks are preferentially located in low-momentum regions of the flow. The spectral content of the T fluctuations is maximum at the wall, but it decreases monotonically as the distance from the wall grows. The relative spectral contributions of the different wavelengths remains unaltered at varying wall-normal locations. From autocorrelation coefficient maps, the characteristic streamwise and wall-normal extents of the T motions are respectively 60 and 40 wall units, independent of the wall distance. Both statistics and instantaneous visualizations show that momentum sources and sinks have a preferential tendency to be organized in positive-negative pairs in the wall-normal direction.

Design requirements for a stand alone EUV interferometer

NASA Astrophysics Data System (ADS)

Michallon, Ph.; Constancias, C.; Lagrange, A.; Dalzotto, B.

2008-03-01

EUV lithography is expected to be inserted for the 32/22 nm nodes with possible extension below. EUV resist availability remains one of the main issues to be resolved. There is an urgent need to provide suitable tools to accelerate resist development and to achieve resolution, LER and sensitivity specifications simultaneously. An interferometer lithography tool offers advantages regarding conventional EUV exposure tool. It allows the evaluation of resists, free from the deficiencies of optics and mask which are limiting the achieved resolution. Traditionally, a dedicated beam line from a synchrotron, with limited access, is used as a light source in EUV interference lithography. This paper identifies the technology locks to develop a stand alone EUV interferometer using a compact EUV source. It will describe the theoretical solutions adopted and especially look at the feasibility according to available technologies. EUV sources available on the market have been evaluated in terms of power level, source size, spatial coherency, dose uniformity, accuracy, stability and reproducibility. According to the EUV source characteristics, several optic designs were studied (simple or double gratings). For each of these solutions, the source and collimation optic specifications have been determined. To reduce the exposure time, a new grating technology will also be presented allowing to significantly increasing the transmission system efficiency. The optical grating designs were studied to allow multi-pitch resolution print on the same exposure without any focus adjustment. Finally micro mechanical system supporting the gratings was studied integrating the issues due to vacuum environment, alignment capability, motion precision, automation and metrology to ensure the needed placement control between gratings and wafer. A similar study was carried out for the collimation-optics mechanical support which depends on the source characteristics.

Different characteristics of mesenchymal stem cells isolated from different layers of full term placenta

PubMed Central

Ha, Chul-Won; Kim, Jin A; Heo, Jin-Chul; Han, Woo-Jung; Oh, Soo-Young; Choi, Suk-Joo

2017-01-01

Background The placenta is a very attractive source of mesenchymal stem cells (MSCs) for regenerative medicine due to readily availability, non-invasive acquisition, and avoidance of ethical issues. Isolating MSCs from parts of placenta tissue has obtained growing interest because they are assumed to exhibit different proliferation and differentiation potentials due to complex structures and functions of the placenta. The objective of this study was to isolate MSCs from different parts of the placenta and compare their characteristics. Methods Placenta was divided into amniotic epithelium (AE), amniotic membrane (AM), chorionic membrane (CM), chorionic villi (CV), chorionic trophoblast without villi (CT-V), decidua (DC), and whole placenta (Pla). Cells isolated from each layer were subjected to analyses for their morphology, proliferation ability, surface markers, and multi-lineage differentiation potential. MSCs were isolated from all placental layers and their characteristics were compared. Findings Surface antigen phenotype, morphology, and differentiation characteristics of cells from all layers indicated that they exhibited properties of MSCs. MSCs from different placental layers had different proliferation rates and differentiation potentials. MSCs from CM, CT-V, CV, and DC had better population doubling time and multi-lineage differentiation potentials compared to those from other layers. Conclusions Our results indicate that MSCs with different characteristics can be isolated from all layers of term placenta. These finding suggest that it is necessary to appropriately select MSCs from different placental layers for successful and consistent outcomes in clinical applications. PMID:28225815

Panel of polymorphic heterologous microsatellite loci to genotype critically endangered Bengal tiger: a pilot study.

PubMed

Mishra, Sudhanshu; Singh, Sujeet Kumar; Munjal, Ashok Kumar; Aspi, Jouni; Goyal, Surendra Prakash

2014-01-03

In India, six landscapes and source populations that are important for long-term conservation of Bengal tigers (Panthera tigris tigris) have been identified. Except for a few studies, nothing is known regarding the genetic structure and extent of gene flow among most of the tiger populations across India as the majority of them are small, fragmented and isolated. Thus, individual-based relationships are required to understand the species ecology and biology for planning effective conservation and genetics-based individual identification has been widely used. But this needs screening and describing characteristics of microsatellite loci from DNA from good-quality sources so that the required number of loci can be selected and the genotyping error rate minimized. In the studies so far conducted on the Bengal tiger, a very small number of loci (n = 35) have been tested with high-quality source of DNA, and information on locus-specific characteristics is lacking. The use of such characteristics has been strongly recommended in the literature to minimize the error rate and by the International Society for Forensic Genetics (ISFG) for forensic purposes. Therefore, we describe for the first time locus-specific genetic and genotyping profile characteristics, crucial for population genetic studies, using high-quality source of DNA of the Bengal tiger. We screened 39 heterologous microsatellite loci (Sumatran tiger, domestic cat, Asiatic lion and snow leopard) in captive individuals (n = 8), of which 21 loci are being reported for the first time in the Bengal tiger, providing an additional choice for selection. The mean relatedness coefficient (R = -0.143) indicates that the selected tigers were unrelated. Thirty-four loci were polymorphic, with the number of alleles ranging from 2 to 7 per locus, and the remaining five loci were monomorphic. Based on the PIC values (> 0.500), and other characteristics, we suggest that 16 loci (3 to 7 alleles) be used for genetic and forensic study purposes. The probabilities of matching genotypes of unrelated individuals (3.692 × 10(-19)) and siblings (4.003 × 10(-6)) are within the values needed for undertaking studies in population genetics, relatedness, sociobiology and forensics.

Policy Guidance From a Multi-scale Suite of Natural Field and Digital Laboratories of Change: Hydrological Catchment Studies of Nutrient and Pollutant Source Releases, Waterborne Transport-Transformations and Mass Flows in Water Ecosystems

NASA Astrophysics Data System (ADS)

Destouni, G.

2008-12-01

Continental fresh water transports and loads excess nutrients and pollutants from various land surface sources, through the landscape, into downstream inland and coastal water environments. Our ability to understand, predict and control the eutrophication and the pollution pressures on inland, coastal and marine water ecosystems relies on our ability to quantify these mass flows. This paper synthesizes a series of hydro- biogeochemical studies of nutrient and pollutant sources, transport-transformations and mass flows in catchment areas across a range of scales, from continental, through regional and national, to individual drainage basin scales. Main findings on continental scales include correlations between country/catchment area, population and GDP and associated pollutant and nutrient loading, which differ significantly between world regions with different development levels. On regional scales, essential systematic near-coastal gaps are identified in the national monitoring of nutrient and pollutant loads from land to the sea. Combination of the unmonitored near-coastal area characteristics with the relevant regional nutrient and pollutant load correlations with these characteristics shows that the unmonitored nutrient and pollutant mass loads to the sea may often be as large as, or greater than the monitored river loads. Process studies on individual basin- scales show long-term nutrient and pollutant memories in the soil-groundwater systems of the basins, which may continue to uphold large mass loading to inland and coastal waters long time after mitigation of the sources. Linked hydro-biogeochemical-economic model studies finally demonstrate significant comparative advantages of policies that demand explicit quantitative account of the uncertainties implied by these monitoring gaps and long-term nutrient-pollution memories and time lags, and other knowledge, data and model limitations, instead of the now common neglect or subjective implicit handling of such uncertainties in strategies and practices for combating water pollution and eutrophication.

Monte Carlo simulation of moderator and reflector in coal analyzer based on a D-T neutron generator.

PubMed

Shan, Qing; Chu, Shengnan; Jia, Wenbao

2015-11-01

Coal is one of the most popular fuels in the world. The use of coal not only produces carbon dioxide, but also contributes to the environmental pollution by heavy metals. In prompt gamma-ray neutron activation analysis (PGNAA)-based coal analyzer, the characteristic gamma rays of C and O are mainly induced by fast neutrons, whereas thermal neutrons can be used to induce the characteristic gamma rays of H, Si, and heavy metals. Therefore, appropriate thermal and fast neutrons are beneficial in improving the measurement accuracy of heavy metals, and ensure that the measurement accuracy of main elements meets the requirements of the industry. Once the required yield of the deuterium-tritium (d-T) neutron generator is determined, appropriate thermal and fast neutrons can be obtained by optimizing the neutron source term. In this article, the Monte Carlo N-Particle (MCNP) Transport Code and Evaluated Nuclear Data File (ENDF) database are used to optimize the neutron source term in PGNAA-based coal analyzer, including the material and shape of the moderator and neutron reflector. The optimized targets include two points: (1) the ratio of the thermal to fast neutron is 1:1 and (2) the total neutron flux from the optimized neutron source in the sample increases at least 100% when compared with the initial one. The simulation results show that, the total neutron flux in the sample increases 102%, 102%, 85%, 72%, and 62% with Pb, Bi, Nb, W, and Be reflectors, respectively. Maximum optimization of the targets is achieved when the moderator is a 3-cm-thick lead layer coupled with a 3-cm-thick high-density polyethylene (HDPE) layer, and the neutron reflector is a 27-cm-thick hemispherical lead layer. Copyright © 2015 Elsevier Ltd. All rights reserved.

Numerical investigation of a modified family of centered schemes applied to multiphase equations with nonconservative sources

NASA Astrophysics Data System (ADS)

Crochet, M. W.; Gonthier, K. A.

2013-12-01

Systems of hyperbolic partial differential equations are frequently used to model the flow of multiphase mixtures. These equations often contain sources, referred to as nozzling terms, that cannot be posed in divergence form, and have proven to be particularly challenging in the development of finite-volume methods. Upwind schemes have recently shown promise in properly resolving the steady wave solution of the associated multiphase Riemann problem. However, these methods require a full characteristic decomposition of the system eigenstructure, which may be either unavailable or computationally expensive. Central schemes, such as the Kurganov-Tadmor (KT) family of methods, require minimal characteristic information, which makes them easily applicable to systems with an arbitrary number of phases. However, the proper implementation of nozzling terms in these schemes has been mathematically ambiguous. The primary objectives of this work are twofold: first, an extension of the KT family of schemes is proposed that formally accounts for the nonconservative nozzling sources. This modification results in a semidiscrete form that retains the simplicity of its predecessor and introduces little additional computational expense. Second, this modified method is applied to multiple, but equivalent, forms of the multiphase equations to perform a numerical study by solving several one-dimensional test problems. Both ideal and Mie-Grüneisen equations of state are used, with the results compared to an analytical solution. This study demonstrates that the magnitudes of the resulting numerical errors are sensitive to the form of the equations considered, and suggests an optimal form to minimize these errors. Finally, a separate modification of the wave propagation speeds used in the KT family is also suggested that can reduce the extent of numerical diffusion in multiphase flows.

Development of Towed Marine Seismic Vibrator as an Alternative Seismic Source

NASA Astrophysics Data System (ADS)

Ozasa, H.; Mikada, H.; Murakami, F.; Jamali Hondori, E.; Takekawa, J.; Asakawa, E.; Sato, F.

2015-12-01

The principal issue with respect to marine impulsive sources to acquire seismic data is if the emission of acoustic energy inflicts harm on marine mammals or not, since the volume of the source signal being released into the marine environment could be so large compared to the sound range of the mammals. We propose a marine seismic vibrator as an alternative to the impulsive sources to mitigate a risk of the impact to the marine environment while satisfying the necessary conditions of seismic surveys. These conditions include the repeatability and the controllability of source signals both in amplitude and phase for high-quality measurements. We, therefore, designed a towed marine seismic vibrator (MSV) as a new type marine vibratory seismic source that employed the hydraulic servo system for the controllability condition in phase and in amplitude that assures the repeatability as well. After fabricating a downsized MSV that requires the power of 30 kVA at a depth of about 250 m in water, several sea trials were conducted to test the source characteristics of the downsized MSV in terms of amplitude, frequency, horizontal and vertical directivities of the generated field. The maximum sound level satisfied the designed specification in the frequencies ranging from 3 to 300 Hz almost omnidirectionally. After checking the source characteristics, we then conducted a trial seismic survey, using both the downsized MSV and an airgun of 480 cubic-inches for comparison, with a streamer cable of 2,000m long right above a cabled earthquake observatory in the Japan Sea. The result showed that the penetration of seismic signals generated by the downsized MSV was comparable to that by the airgun, although there was a slight difference in the signal-to-noise ratio. The MSV could become a versatile source that will not harm living marine mammals as an alternative to the existing impulsive seismic sources such as airgun.

Computational Investigation of Combustion Dynamics in a Lean-Direct Injection Gas Turbine Combustor

DTIC Science & Technology

2012-11-01

variable vector which includes turbulence kinetic energy and specific dissipation, k and w; In the viscous flux, D is the molecular diffusion coefficient...for the liquid particle. This equation assumes the uniform temperature inside the liquid particle. The source term consist of the net sensible ...Spray Characteristics on Diesel Engine Combustion and Emission, SAE 980131, 1998 24 Fu, Y., “Aerodynamics and Combustion of Axial Swirlers,” Ph . D. dissertation from the University of Cincinnati, 2008.

Sortie laboratory, phase B technical summary. [design and operational requirements

NASA Technical Reports Server (NTRS)

1973-01-01

The design and operational requirements which evolved from Sortie Lab (SL) analysis are summarized. A source of requirements for systems is given along with experimental support for the SL, baseline. Basic design data covered include: configuration definition, mission analysis, experimental integration, safety, and logistics. A technical summary outlines characteristics which reflect the influence of the growth in SL capability and the results of the mission and operational analysis. Each of the selected areas is described in terms of objectives, equipment, operational concept, and support requirements.

Characteristics of health care organizations associated with learning and development: lessons from a pilot study.

PubMed

Nyström, Monica

2009-01-01

Characteristics of health care organizations associated with an ability to learn from experiences and to develop and manage change were explored in this study. Understanding of these characteristics is necessary to identify factors influencing success in learning from the past and achieving future health care quality objectives. A literature review of the quality improvement, strategic organizational development and change management, organizational learning, and microsystems fields identified 20 organizational characteristics, grouped under (a) organizational systems, (b) key actors, and (c) change management processes. Qualitative methods, using interviews, focus group reports, and archival records, were applied to find associations between identified characteristics and 6 Swedish health care units externally evaluated as delivering high-quality care. Strong support for a characteristic was defined as units having more than 4 sources describing the characteristic as an important success factor. Eighteen characteristics had strong support from at least 2 units. The strongest evidence was found for the following: (i) key actors have long-term commitment, provide support, and make sense of ambiguous situations; (ii) organizational systems encourage employee commitment, participation, and involvement; and (iii) change management processes are employed systematically. Based on the results, a new model of "characteristics associated with learning and development in health care organizations" is proposed.

Optimization of a mirror-based neutron source using differential evolution algorithm

NASA Astrophysics Data System (ADS)

Yurov, D. V.; Prikhodko, V. V.

2016-12-01

This study is dedicated to the assessment of capabilities of gas-dynamic trap (GDT) and gas-dynamic multiple-mirror trap (GDMT) as potential neutron sources for subcritical hybrids. In mathematical terms the problem of the study has been formulated as determining the global maximum of fusion gain (Q pl), the latter represented as a function of trap parameters. A differential evolution method has been applied to perform the search. Considered in all calculations has been a configuration of the neutron source with 20 m long distance between the mirrors and 100 MW heating power. It is important to mention that the numerical study has also taken into account a number of constraints on plasma characteristics so as to provide physical credibility of searched-for trap configurations. According to the results obtained the traps considered have demonstrated fusion gain up to 0.2, depending on the constraints applied. This enables them to be used either as neutron sources within subcritical reactors for minor actinides incineration or as material-testing facilities.

Use of Online Sources of Information by Dental Practitioners: Findings from The Dental Practice-Based Research Network

PubMed Central

Funkhouser, Ellen; Agee, Bonita S.; Gordan, Valeria V.; Rindal, D. Brad; Fellows, Jeffrey L.; Qvist, Vibeke; McClelland, Jocelyn; Gilbert, Gregg H.

2013-01-01

Objectives Estimate the proportion of dental practitioners who use online sources of information for practice guidance. Methods From a survey of 657 dental practitioners in The Dental Practice Based Research Network, four indicators of online use for practice guidance were calculated: read journals online, obtained continuing education (CDE) through online sources, rated an online source as most influential, and reported frequently using an online source for guidance. Demographics, journals read, and use of various sources of information for practice guidance in terms of frequency and influence were ascertained for each. Results Overall, 21% (n=138) were classified into one of the four indicators of online use: 14% (n=89) rated an online source as most influential and 13% (n=87) reported frequently using an online source for guidance; few practitioners (5%, n=34) read journals online, fewer (3%, n=17) obtained CDE through online sources. Use of online information sources varied considerably by region and practice characteristics. In general, the 4 indicators represented practitioners with as many differences as similarities to each other and to offline users. Conclusion A relatively small proportion of dental practitioners use information from online sources for practice guidance. Variation exists regarding practitioners’ use of online source resources and how they rate the value of offline information sources for practice guidance. PMID:22994848

Milan Army Ammunition Plant remedial investigation report: Volume 1. Final report 89-91

DOE Office of Scientific and Technical Information (OSTI.GOV)

Okusu, N.; Hall, H.; Orndorff, A.

1991-12-09

A Remedial Investigation at the Milan Army Ammunition Plant, TN, was conducted for the US Army Toxic and Hazardous Materials Agency, under the terms of an Interagency Agreement with the State of Tennessee and the US Environmental Protection Agency. The study focused on the CERCLA site and selected RCRA regulated units identified by previous studies as potential sources of contamination. A broad range of chemicals including metals, explosives, and other organic compounds were found in source areas and in groundwater. The results of a risk assessment indicate that unacceptable levels of human health risks potentially exist. Conceptual models of sitemore » and unit characteristics were formulated to explain major findings, and areas not contributing to the problem were identified. For many source areas, major unknowns exist regarding hydrology, extent of contamination, and current and future impacts to groundwater quality.« less

The OLI Radiometric Scale Realization Round Robin Measurement Campaign

NASA Technical Reports Server (NTRS)

Cutlip, Hansford; Cole,Jerold; Johnson, B. Carol; Maxwell, Stephen; Markham, Brian; Ong, Lawrence; Hom, Milton; Biggar, Stuart

2011-01-01

A round robin radiometric scale realization was performed at the Ball Aerospace Radiometric Calibration Laboratory in January/February 2011 in support of the Operational Land Imager (OLI) Program. Participants included Ball Aerospace, NIST, NASA Goddard Space Flight Center, and the University of Arizona. The eight day campaign included multiple observations of three integrating sphere sources by nine radiometers. The objective of the campaign was to validate the radiance calibration uncertainty ascribed to the integrating sphere used to calibrate the OLI instrument. The instrument level calibration source uncertainty was validated by quatnifying: (1) the long term stability of the NIST calibrated radiance artifact, (2) the responsivity scale of the Ball Aerospace transfer radiometer and (3) the operational characteristics of the large integrating sphere.

Fundamental questions of earthquake statistics, source behavior, and the estimation of earthquake probabilities from possible foreshocks

USGS Publications Warehouse

Michael, Andrew J.

2012-01-01

Estimates of the probability that an ML 4.8 earthquake, which occurred near the southern end of the San Andreas fault on 24 March 2009, would be followed by an M 7 mainshock over the following three days vary from 0.0009 using a Gutenberg–Richter model of aftershock statistics (Reasenberg and Jones, 1989) to 0.04 using a statistical model of foreshock behavior and long‐term estimates of large earthquake probabilities, including characteristic earthquakes (Agnew and Jones, 1991). I demonstrate that the disparity between the existing approaches depends on whether or not they conform to Gutenberg–Richter behavior. While Gutenberg–Richter behavior is well established over large regions, it could be violated on individual faults if they have characteristic earthquakes or over small areas if the spatial distribution of large‐event nucleations is disproportional to the rate of smaller events. I develop a new form of the aftershock model that includes characteristic behavior and combines the features of both models. This new model and the older foreshock model yield the same results when given the same inputs, but the new model has the advantage of producing probabilities for events of all magnitudes, rather than just for events larger than the initial one. Compared with the aftershock model, the new model has the advantage of taking into account long‐term earthquake probability models. Using consistent parameters, the probability of an M 7 mainshock on the southernmost San Andreas fault is 0.0001 for three days from long‐term models and the clustering probabilities following the ML 4.8 event are 0.00035 for a Gutenberg–Richter distribution and 0.013 for a characteristic‐earthquake magnitude–frequency distribution. Our decisions about the existence of characteristic earthquakes and how large earthquakes nucleate have a first‐order effect on the probabilities obtained from short‐term clustering models for these large events.

Boreal forest soil erosion and soil-atmosphere carbon exchange

NASA Astrophysics Data System (ADS)

Billings, S. A.; Harden, J. W.; O'Donnell, J.; Sierra, C. A.

2013-12-01

Erosion may become an increasingly important agent of change in boreal systems with climate warming, due to enhanced ice wedge degradation and increases in the frequency and intensity of stand-replacing fires. Ice wedge degradation can induce ground surface subsidence and lateral movement of mineral soil downslope, and fire can result in the loss of O horizons and live roots, with associated increases in wind- and water-promoted erosion until vegetation re-establishment. It is well-established that soil erosion can induce significant atmospheric carbon (C) source and sink terms, with the strength of these terms dependent on the fate of eroded soil organic carbon (SOC) and the extent to which SOC oxidation and production characteristics change with erosion. In spite of the large SOC stocks in the boreal system and the high probability that boreal soil profiles will experience enhanced erosion in the coming decades, no one has estimated the influence of boreal erosion on the atmospheric C budget, a phenomenon that can serve as a positive or negative feedback to climate. We employed an interactive erosion model that permits the user to define 1) profile characteristics, 2) the erosion rate, and 3) the extent to which each soil layer at an eroding site retains its pre-erosion SOC oxidation and production rates (nox and nprod=0, respectively) vs. adopts the oxidation and production rates of previous, non-eroded soil layers (nox and nprod=1, respectively). We parameterized the model using soil profile characteristics observed at a recently burned site in interior Alaska (Hess Creek), defining SOC content and turnover times. We computed the degree to which post-burn erosion of mineral soil generates an atmospheric C sink or source while varying erosion rates and assigning multiple values of nox and nprod between 0 and 1, providing insight into the influence of erosion rate, SOC oxidation, and SOC production on C dynamics in this and similar profiles. Varying nox and nprod did not induce meaningful changes in model estimates of atmospheric C source or sink strength, likely due to the low turnover rate of SOC in this system. However, variation in mineral soil erosion rates induced large shifts in the source and sink strengths for atmospheric C; after 50 y of mineral soil erosion at 5 cm y-1, we observed a maximum C source of 35 kg C m-2 and negligible sink strength. Doubling the erosion rate approximately doubled the source strength. Scaling these estimates to the region requires estimates of the area undergoing mineral soil erosion in forests similar to those modeled. We suggest that erosion is an important but little studied feature of fire-driven boreal systems that will influence atmospheric CO2 budgets.

Deciphering acoustic emission signals in drought stressed branches: the missing link between source and sensor.

PubMed

Vergeynst, Lidewei L; Sause, Markus G R; Hamstad, Marvin A; Steppe, Kathy

2015-01-01

When drought occurs in plants, acoustic emission (AE) signals can be detected, but the actual causes of these signals are still unknown. By analyzing the waveforms of the measured signals, it should, however, be possible to trace the characteristics of the AE source and get information about the underlying physiological processes. A problem encountered during this analysis is that the waveform changes significantly from source to sensor and lack of knowledge on wave propagation impedes research progress made in this field. We used finite element modeling and the well-known pencil lead break source to investigate wave propagation in a branch. A cylindrical rod of polyvinyl chloride was first used to identify the theoretical propagation modes. Two wave propagation modes could be distinguished and we used the finite element model to interpret their behavior in terms of source position for both the PVC rod and a wooden rod. Both wave propagation modes were also identified in drying-induced signals from woody branches, and we used the obtained insights to provide recommendations for further AE research in plant science.

Laser Scanning Systems and Techniques in Rockfall Source Identification and Risk Assessment: A Critical Review

NASA Astrophysics Data System (ADS)

Fanos, Ali Mutar; Pradhan, Biswajeet

2018-04-01

Rockfall poses risk to people, their properties and to transportation ways in mountainous and hilly regions. This catastrophe shows various characteristics such as vast distribution, sudden occurrence, variable magnitude, strong fatalness and randomicity. Therefore, prediction of rockfall phenomenon both spatially and temporally is a challenging task. Digital Terrain model (DTM) is one of the most significant elements in rockfall source identification and risk assessment. Light detection and ranging (LiDAR) is the most advanced effective technique to derive high-resolution and accurate DTM. This paper presents a critical overview of rockfall phenomenon (definition, triggering factors, motion modes and modeling) and LiDAR technique in terms of data pre-processing, DTM generation and the factors that can be obtained from this technique for rockfall source identification and risk assessment. It also reviews the existing methods that are utilized for the evaluation of the rockfall trajectories and their characteristics (frequency, velocity, bouncing height and kinetic energy), probability, susceptibility, hazard and risk. Detail consideration is given on quantitative methodologies in addition to the qualitative ones. Various methods are demonstrated with respect to their application scales (local and regional). Additionally, attention is given to the latest improvement, particularly including the consideration of the intensity of the phenomena and the magnitude of the events at chosen sites.

Effect of flow velocity and temperature on ignition characteristics in laser ignition of natural gas and air mixtures

NASA Astrophysics Data System (ADS)

Griffiths, J.; Riley, M. J. W.; Borman, A.; Dowding, C.; Kirk, A.; Bickerton, R.

2015-03-01

Laser induced spark ignition offers the potential for greater reliability and consistency in ignition of lean air/fuel mixtures. This increased reliability is essential for the application of gas turbines as primary or secondary reserve energy sources in smart grid systems, enabling the integration of renewable energy sources whose output is prone to fluctuation over time. This work details a study into the effect of flow velocity and temperature on minimum ignition energies in laser-induced spark ignition in an atmospheric combustion test rig, representative of a sub 15 MW industrial gas turbine (Siemens Industrial Turbomachinery Ltd., Lincoln, UK). Determination of minimum ignition energies required for a range of temperatures and flow velocities is essential for establishing an operating window in which laser-induced spark ignition can operate under realistic, engine-like start conditions. Ignition of a natural gas and air mixture at atmospheric pressure was conducted using a laser ignition system utilizing a Q-switched Nd:YAG laser source operating at 532 nm wavelength and 4 ns pulse length. Analysis of the influence of flow velocity and temperature on ignition characteristics is presented in terms of required photon flux density, a useful parameter to consider during the development laser ignition systems.

Structural Modification of Organic Thin-Film Transistors for Photosensor Application

NASA Astrophysics Data System (ADS)

Jeong, Hyeon Seok; Bae, Jin-Hyuk; Lee, Hyeonju; Ndikumana, Joel; Park, Jaehoon

2018-05-01

We investigated the light response characteristics of bottom-gate/top-contact organic TFTs fabricated using pentacene and polystyrene as an organic semiconductor and a polymeric insulator, respectively. The pentacene TFT with overlaps (50 μm) between the source and gate electrodes as well as between the drain and gate electrodes exhibited negligible hysteresis in its transfer characteristics upon reversal of the gate voltage sweep direction. When the TFTs were structurally modified to produce an underlap structure between the source and gate electrodes, clockwise hysteresis and a drain-current decrease were observed, which were further augmented by increasing the gate underlap (from 30 μm to 50 μm and 70 μm). Herein, these results are explained in terms of space charge formation and accumulation capacitance reduction. Importantly, we found that space charges formed under the source electrode contributed to the drain currents via light irradiation through the underlap region. Under constant bias conditions, the TFTs with gate underlap structures thus exhibited on-state drain current changes in response to light signals. In our study, an optimal photosensitivity exceeding 11 was achieved by the TFT with a 30 μm gate underlap. Consequently, we suggest that gate underlap structure modification is a viable means of implementing light responsiveness in organic TFTs.

[Characteristics of atmospheric CO2 concentration and variation of carbon source & sink at Lin'an regional background station].

PubMed

Pu, Jing-Jiao; Xu, Hong-Hui; Kang, Li-Li; Ma, Qian-Li

2011-08-01

Characteristics of Atmospheric CO2 concentration obtained by Flask measurements were analyzed at Lin'an regional background station from August 2006 to July 2009. According to the simulation results of carbon tracking model, the impact of carbon sources and sinks on CO2 concentration was evaluated in Yangtze River Delta. The results revealed that atmospheric CO2 concentrations at Lin'an regional background station were between 368.3 x 10(-6) and 414.8 x 10(-6). The CO2 concentration varied as seasons change, with maximum in winter and minimum in summer; the annual difference was about 20.5 x 10(-6). The long-term trend of CO2 concentration showed rapid growth year by year; the average growth rate was about 3.2 x 10(-6)/a. CO2 flux of Yangtze River Delta was mainly contributed by fossil fuel burning, terrestrial biosphere exchange and ocean exchange, while the contribution of fire emission was small. CO2 flux from fossil fuel burning played an important role in carbon source; terrestrial biosphere and ocean were important carbon sinks in this area. Seasonal variations of CO2 concentration at Lin'an regional background station were consistent with CO2 fluxes from fossil fuel burning and terrestrial biosphere exchange.

Classification of natural products as sources of drugs according to the biopharmaceutics drug disposition classification system (BDDCS).

PubMed

Li, Ji; Larregieu, Caroline A; Benet, Leslie Z

2016-12-01

Natural products (NPs) are compounds that are derived from natural sources such as plants, animals, and micro-organisms. Therapeutics has benefited from numerous drug classes derived from natural product sources. The Biopharmaceutics Drug Disposition Classification System (BDDCS) was proposed to serve as a basis for predicting the importance of transporters and enzymes in determining drug bioavailability and disposition. It categorizes drugs into one of four biopharmaceutical classes according to their water solubility and extent of metabolism. The present paper reviews 109 drugs from natural product sources: 29% belong to class 1 (high solubility, extensive metabolism), 22% to class 2 (low solubility, extensive metabolism), 40% to class 3 (high solubility, poor metabolism), and 9% to class 4 (low solubility, poor metabolism). Herein we evaluated the characteristics of NPs in terms of BDDCS class for all 109 drugs as wells as for subsets of NPs drugs derived from plant sources as antibiotics. In the 109 NPs drugs, we compiled 32 drugs from plants, 50% (16) of total in class 1, 22% (7) in class 2 and 28% (9) in class 3, none found in class 4; Meantime, the antibiotics were found 5 (16%) in class 2, 22 (71%) in class 3, and 4 (13%) in class 4; no drug was found in class 1. Based on this classification, we anticipate BDDCS to serve as a useful adjunct in evaluating the potential characteristics of new natural products. Copyright © 2016 China Pharmaceutical University. Published by Elsevier B.V. All rights reserved.

Antimicrobial activity and mechanism of the human milk-sourced peptide Casein201

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Fan; Department of Endocrinology, Children's Hospital of Nanjing Medical University, Nanjing; Cui, Xianwei

Introduction: Casein201 is one of the human milk sourced peptides that differed significantly in preterm and full-term mothers. This study is designed to demonstrate the biological characteristics, antibacterial activity and mechanisms of Casein201 against common pathogens in neonatal infection. Methodology: The analysis of biological characteristics was done by bioinformatics. Disk diffusion method and flow cytometry were used to detect the antimicrobial activity of Casein201. Killing kinetics of Casein201 was measured using microplate reader. The antimicrobial mechanism of Casein201 was studied by electron microscopy and electrophoresis. Results: Bioinformatics analysis indicates that Casein201 derived from β-casein and showed significant sequence overlap. Antibacterialmore » assays showed Casein201 inhibited the growth of S taphylococcus aureus and Y ersinia enterocolitica. Ultrastructural analyses revealed that the antibacterial activity of Casein201 is through cytoplasmic structures disintegration and bacterial cell envelope alterations but not combination with DNA. Conclusion: We conclude the antimicrobial activity and mechanism of Casein201. Our data demonstrate that Casein201 has potential therapeutic value for the prevention and treatment of pathogens in neonatal infection.« less

Antimicrobial activity and mechanism of the human milk-sourced peptide Casein201.

PubMed

Zhang, Fan; Cui, Xianwei; Fu, Yanrong; Zhang, Jun; Zhou, Yahui; Sun, Yazhou; Wang, Xing; Li, Yun; Liu, Qianqi; Chen, Ting

2017-04-08

Casein201 is one of the human milk sourced peptides that differed significantly in preterm and full-term mothers. This study is designed to demonstrate the biological characteristics, antibacterial activity and mechanisms of Casein201 against common pathogens in neonatal infection. The analysis of biological characteristics was done by bioinformatics. Disk diffusion method and flow cytometry were used to detect the antimicrobial activity of Casein201. Killing kinetics of Casein201 was measured using microplate reader. The antimicrobial mechanism of Casein201 was studied by electron microscopy and electrophoresis. Bioinformatics analysis indicates that Casein201 derived from β-casein and showed significant sequence overlap. Antibacterial assays showed Casein201 inhibited the growth of S taphylococcus aureus and Y ersinia enterocolitica. Ultrastructural analyses revealed that the antibacterial activity of Casein201 is through cytoplasmic structures disintegration and bacterial cell envelope alterations but not combination with DNA. We conclude the antimicrobial activity and mechanism of Casein201. Our data demonstrate that Casein201 has potential therapeutic value for the prevention and treatment of pathogens in neonatal infection. Copyright © 2017 Elsevier Inc. All rights reserved.

Cluster compression algorithm: A joint clustering/data compression concept

NASA Technical Reports Server (NTRS)

Hilbert, E. E.

1977-01-01

The Cluster Compression Algorithm (CCA), which was developed to reduce costs associated with transmitting, storing, distributing, and interpreting LANDSAT multispectral image data is described. The CCA is a preprocessing algorithm that uses feature extraction and data compression to more efficiently represent the information in the image data. The format of the preprocessed data enables simply a look-up table decoding and direct use of the extracted features to reduce user computation for either image reconstruction, or computer interpretation of the image data. Basically, the CCA uses spatially local clustering to extract features from the image data to describe spectral characteristics of the data set. In addition, the features may be used to form a sequence of scalar numbers that define each picture element in terms of the cluster features. This sequence, called the feature map, is then efficiently represented by using source encoding concepts. Various forms of the CCA are defined and experimental results are presented to show trade-offs and characteristics of the various implementations. Examples are provided that demonstrate the application of the cluster compression concept to multi-spectral images from LANDSAT and other sources.

Identify and Quantify the Mechanistic Sources of Sensor Performance Variation Between Individual Sensors SN1 and SN2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diaz, Aaron A.; Baldwin, David L.; Cinson, Anthony D.

2014-08-06

This Technical Letter Report satisfies the M3AR-14PN2301022 milestone, and is focused on identifying and quantifying the mechanistic sources of sensor performance variation between individual 22-element, linear phased-array sensor prototypes, SN1 and SN2. This effort constitutes an iterative evolution that supports the longer term goal of producing and demonstrating a pre-manufacturing prototype ultrasonic probe that possesses the fundamental performance characteristics necessary to enable the development of a high-temperature sodium-cooled fast reactor inspection system. The scope of the work for this portion of the PNNL effort conducted in FY14 includes performing a comparative evaluation and assessment of the performance characteristics of themore » SN1 and SN2 22 element PA-UT probes manufactured at PNNL. Key transducer performance parameters, such as sound field dimensions, resolution capabilities, frequency response, and bandwidth are used as a metric for the comparative evaluation and assessment of the SN1 and SN2 engineering test units.« less

Heroin-related overdose: The unexplored influences of markets, marketing and source-types in the United States.

PubMed

Mars, Sarah G; Fessel, Jason N; Bourgois, Philippe; Montero, Fernando; Karandinos, George; Ciccarone, Daniel

2015-09-01

Heroin overdose, more accurately termed 'heroin-related overdose' due to the frequent involvement of other drugs, is the leading cause of mortality among regular heroin users. (Degenhardt et al., 2010) Heroin injectors are at greater risk of hospital admission for heroin-related overdose (HOD) in the eastern United States where Colombian-sourced powder heroin is sold than in the western US where black 'tar' heroin predominates. (Unick et al., 2014) This paper examines under-researched influences on HOD, both fatal and non-fatal, using data from a qualitative study of injecting drug users of black tar heroin in San Francisco and powder heroin in Philadelphia Data were collected through in-depth, semi-structured interviews carried out in 2012 that were conducted against a background of longer-term participant-observation, ethnographic studies of drug users and dealers in Philadelphia (2007-12) and of users in San Francisco (1994-2007, 2012). Our findings suggest three types of previously unconsidered influences on overdose risk that arise both from structural socio-economic factors and from the physical properties of the heroin source-types: 1) retail market structure including information flow between users; 2) marketing techniques such as branding, free samples and pricing and 3) differences in the physical characteristics of the two major heroin source forms and how they affect injecting techniques and vascular health. Although chosen for their contrasting source-forms, we found that the two cities have contrasting dominant models of drug retailing: San Francisco respondents tended to buy through private dealers and Philadelphia respondents frequented an open-air street market where heroin is branded and free samples are distributed, although each city included both types of drug sales. These market structures and marketing techniques shape the availability of information regarding heroin potency and its dissemination among users who tend to seek out the strongest heroin available on a given day. The physical characteristics of these two source-types, the way they are prepared for injecting and their effects on vein health also differ markedly. The purpose of this paper is to examine some of the unexplored factors that may lead to heroin-related overdose in the United States and to generate hypotheses for further study. Copyright © 2015 Elsevier Ltd. All rights reserved.

Heroin-related overdose: The unexplored influences of markets, marketing and source-types in the United States

PubMed Central

Mars, Sarah G.; Fessel, Jason N.; Bourgois, Philippe; Montero, Fernando; Karandinos, George; Ciccarone, Daniel

2015-01-01

Heroin overdose, more accurately termed ‘heroin-related overdose’ due to the frequent involvement of other drugs, is the leading cause of mortality among regular heroin users. (Degenhardt et al., 2010) Heroin injectors are at greater risk of hospital admission for heroin-related overdose (HOD) in the eastern United States where Colombian-sourced powder heroin is sold than in the western US where black ‘tar’ heroin predominates. (Unick et al., 2014) This paper examines under-researched influences on HOD, both fatal and non-fatal, using data from a qualitative study of injecting drug users of black tar heroin in San Francisco and powder heroin in Philadelphia Data were collected through in-depth, semi-structured interviews carried out in 2012 that were conducted against a background of longer-term participant-observation, ethnographic studies of drug users and dealers in Philadelphia (2007–12) and of users in San Francisco (1994–2007, 2012). Our findings suggest three types of previously unconsidered influences on overdose risk that arise both from structural socio-economic factors and from the physical properties of the heroin source-types: 1) retail market structure including information flow between users; 2) marketing techniques such as branding, free samples and pricing and 3) differences in the physical characteristics of the two major heroin source forms and how they affect injecting techniques and vascular health. Although chosen for their contrasting source-forms, we found that the two cities have contrasting dominant models of drug retailing: San Francisco respondents tended to buy through private dealers and Philadelphia respondents frequented an open-air street market where heroin is branded and free samples are distributed, although each city included both types of drug sales. These market structures and marketing techniques shape the availability of information regarding heroin potency and its dissemination among users who tend to seek out the strongest heroin available on a given day. The physical characteristics of these two source-types, the way they are prepared for injecting and their effects on vein health also differ markedly. The purpose of this paper is to examine some of the unexplored factors that may lead to heroin-related overdose in the United States and to generate hypotheses for further study. PMID:26202771

The sustainability of healthcare innovations: a concept analysis.

PubMed

Fleiszer, Andrea R; Semenic, Sonia E; Ritchie, Judith A; Richer, Marie-Claire; Denis, Jean-Louis

2015-07-01

To report on an analysis of the concept of the sustainability of healthcare innovations. While there have been significant empirical, theoretical and practical contributions made towards the development and implementation of healthcare innovations, there has been less attention paid to their sustainability. Yet many desired healthcare innovations are not sustained over the long term. There is a need to increase clarity around the concept of innovation sustainability to guide the advancement of knowledge on this topic. Concept analysis. We included literature reviews, theoretical and empirical articles, books and grey literature obtained through database searching (ABI/INFORM, Academic Search Complete, Business Source Complete, CINAHL, Embase, MEDLINE and Web of Science) from 1996-May 2014, reference harvesting and citation searching. We examined sources according to terms and definitions, characteristics, preconditions, outcomes and boundaries to evaluate the maturity of the concept. This concept is partially mature. Healthcare innovation sustainability remains a multi-dimensional, multi-factorial notion that is used inconsistently or ambiguously and takes on different meanings at different times in different contexts. We propose a broad conceptualization that consists of three characteristics: benefits, routinization or institutionalization, and development. We also suggest that sustained innovations are influenced by a variety of preconditions or factors, which are innovation-, context-, leadership- and process-related. Further conceptual development is essential to continue advancing our understanding of the sustainability of healthcare innovations, especially in nursing where this topic remains largely unexplored. © 2015 John Wiley & Sons Ltd.

Development, beam characterization and chromosomal effectiveness of X-rays of RBC characteristic X-ray generator.

PubMed

Endo, Satoru; Hoshi, Masaharu; Takada, Jun; Takatsuji, Toshihiro; Ejima, Yosuke; Saigusa, Shin; Tachibana, Akira; Sasaki, Masao S

2006-06-01

A characteristic hot-filament type X-ray generator was constructed for irradiation of cultured cells. The source provides copper K, iron K, chromium K, molybdenum L, aluminium K and carbon K shell characteristic X-rays. When cultured mouse m5S cells were irradiated and frequencies of dicentrics were fitted to a linear-quadratic model, Y = alphaD + betaD2, the chromosomal effectiveness was not a simple function of photon energy. The alpha-terms increased with the decrease of the photon energy and then decreased with further decrease of the energy with an inflection point at around 10 keV. The beta-terms stayed constant for the photon energy down to 10 keV and then increased with further decrease of energy. Below 10 keV, the relative biological effectiveness (RBE) at low doses was proportional to the photon energy, which contrasted to that for high energy X- or gamma-rays where the RBE was inversely related with the photon energy. The reversion of the energy dependency occurred at around 1-2 Gy, where the RBE of soft X-rays was insensitive to X-ray energy. The reversion of energy-RBE relation at a moderate dose may shed light on the controversy on energy dependency of RBE of ultrasoft X-rays in cell survival experiments.

Discriminating Simulated Vocal Tremor Source Using Amplitude Modulation Spectra

PubMed Central

Carbonell, Kathy M.; Lester, Rosemary A.; Story, Brad H.; Lotto, Andrew J.

2014-01-01

Objectives/Hypothesis Sources of vocal tremor are difficult to categorize perceptually and acoustically. This paper describes a preliminary attempt to discriminate vocal tremor sources through the use of spectral measures of the amplitude envelope. The hypothesis is that different vocal tremor sources are associated with distinct patterns of acoustic amplitude modulations. Study Design Statistical categorization methods (discriminant function analysis) were used to discriminate signals from simulated vocal tremor with different sources using only acoustic measures derived from the amplitude envelopes. Methods Simulations of vocal tremor were created by modulating parameters of a vocal fold model corresponding to oscillations of respiratory driving pressure (respiratory tremor), degree of vocal fold adduction (adductory tremor) and fundamental frequency of vocal fold vibration (F0 tremor). The acoustic measures were based on spectral analyses of the amplitude envelope computed across the entire signal and within select frequency bands. Results The signals could be categorized (with accuracy well above chance) in terms of the simulated tremor source using only measures of the amplitude envelope spectrum even when multiple sources of tremor were included. Conclusions These results supply initial support for an amplitude-envelope based approach to identify the source of vocal tremor and provide further evidence for the rich information about talker characteristics present in the temporal structure of the amplitude envelope. PMID:25532813

Common characteristics of open source software development and applicability for drug discovery: a systematic review.

PubMed

Ardal, Christine; Alstadsæter, Annette; Røttingen, John-Arne

2011-09-28

Innovation through an open source model has proven to be successful for software development. This success has led many to speculate if open source can be applied to other industries with similar success. We attempt to provide an understanding of open source software development characteristics for researchers, business leaders and government officials who may be interested in utilizing open source innovation in other contexts and with an emphasis on drug discovery. A systematic review was performed by searching relevant, multidisciplinary databases to extract empirical research regarding the common characteristics and barriers of initiating and maintaining an open source software development project. Common characteristics to open source software development pertinent to open source drug discovery were extracted. The characteristics were then grouped into the areas of participant attraction, management of volunteers, control mechanisms, legal framework and physical constraints. Lastly, their applicability to drug discovery was examined. We believe that the open source model is viable for drug discovery, although it is unlikely that it will exactly follow the form used in software development. Hybrids will likely develop that suit the unique characteristics of drug discovery. We suggest potential motivations for organizations to join an open source drug discovery project. We also examine specific differences between software and medicines, specifically how the need for laboratories and physical goods will impact the model as well as the effect of patents.

Inter-Annual and Shorter-Term Variability in Physical and Biological Characteristics Across Barrow Canyon in August - September 2005-2014

NASA Astrophysics Data System (ADS)

Ashjian, C. J.; Okkonen, S. R.; Campbell, R. G.; Alatalo, P.

2014-12-01

Late summer physical and biological conditions along a 37-km transect crossing Barrow Canyon have been described for the past ten years as part of an ongoing program, supported by multiple funding sources including the NSF AON, focusing on inter-annual variability and the formation of a bowhead whale feeding hotspot near Barrow. These repeated transects (at least two per year, separated in time by days-weeks) provide an opportunity to assess the inter-annual and shorter term (days-weeks) changes in hydrographic structure, ocean temperature, current velocity and transport, chlorophyll fluorescence, nutrients, and micro- and mesozooplankton community composition and abundance. Inter-annual variability in all properties was high and was associated with larger scale, meteorological forcing. Shorter-term variability could also be high but was strongly influenced by changes in local wind forcing. The sustained sampling at this location provided critical measures of inter-annual variability that should permit detection of longer-term trends that are associated with ongoing climate change.

Emergent Constraints for Cloud Feedbacks and Climate Sensitivity

DOE PAGES

Klein, Stephen A.; Hall, Alex

2015-10-26

Emergent constraints are physically explainable empirical relationships between characteristics of the current climate and long-term climate prediction that emerge in collections of climate model simulations. With the prospect of constraining long-term climate prediction, scientists have recently uncovered several emergent constraints related to long-term cloud feedbacks. We review these proposed emergent constraints, many of which involve the behavior of low-level clouds, and discuss criteria to assess their credibility. With further research, some of the cases we review may eventually become confirmed emergent constraints, provided they are accompanied by credible physical explanations. Because confirmed emergent constraints identify a source of model errormore » that projects onto climate predictions, they deserve extra attention from those developing climate models and climate observations. While a systematic bias cannot be ruled out, it is noteworthy that the promising emergent constraints suggest larger cloud feedback and hence climate sensitivity.« less

Data and methods for studying commercial motor vehicle driver fatigue, highway safety and long-term driver health.

PubMed

Stern, Hal S; Blower, Daniel; Cohen, Michael L; Czeisler, Charles A; Dinges, David F; Greenhouse, Joel B; Guo, Feng; Hanowski, Richard J; Hartenbaum, Natalie P; Krueger, Gerald P; Mallis, Melissa M; Pain, Richard F; Rizzo, Matthew; Sinha, Esha; Small, Dylan S; Stuart, Elizabeth A; Wegman, David H

2018-03-09

This article summarizes the recommendations on data and methodology issues for studying commercial motor vehicle driver fatigue of a National Academies of Sciences, Engineering, and Medicine study. A framework is provided that identifies the various factors affecting driver fatigue and relating driver fatigue to crash risk and long-term driver health. The relevant factors include characteristics of the driver, vehicle, carrier and environment. Limitations of existing data are considered and potential sources of additional data described. Statistical methods that can be used to improve understanding of the relevant relationships from observational data are also described. The recommendations for enhanced data collection and the use of modern statistical methods for causal inference have the potential to enhance our understanding of the relationship of fatigue to highway safety and to long-term driver health. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Analysis of Patient Narratives in Disease Blogs on the Internet: An Exploratory Study of Social Pharmacovigilance.

PubMed

Matsuda, Shinichi; Aoki, Kotonari; Tomizawa, Shiho; Sone, Masayoshi; Tanaka, Riwa; Kuriki, Hiroshi; Takahashi, Yoichiro

2017-02-24

Although several reports have suggested that patient-generated data from Internet sources could be used to improve drug safety and pharmacovigilance, few studies have identified such data sources in Japan. We introduce a unique Japanese data source: tōbyōki, which translates literally as "an account of a struggle with disease." The objective of this study was to evaluate the basic characteristics of the TOBYO database, a collection of tōbyōki blogs on the Internet, and discuss potential applications for pharmacovigilance. We analyzed the overall gender and age distribution of the patient-generated TOBYO database and compared this with other external databases generated by health care professionals. For detailed analysis, we prepared separate datasets for blogs written by patients with depression and blogs written by patients with rheumatoid arthritis (RA), because these conditions were expected to entail subjective patient symptoms such as discomfort, insomnia, and pain. Frequently appearing medical terms were counted, and their variations were compared with those in an external adverse drug reaction (ADR) reporting database. Frequently appearing words regarding patients with depression and patients with RA were visualized using word clouds and word cooccurrence networks. As of June 4, 2016, the TOBYO database comprised 54,010 blogs representing 1405 disorders. Overall, more entries were written by female bloggers (68.8%) than by male bloggers (30.8%). The most frequently observed disorders were breast cancer (4983 blogs), depression (3556), infertility (2430), RA (1118), and panic disorder (1090). Comparison of medical terms observed in tōbyōki blogs with those in an external ADR reporting database showed that subjective and symptomatic events and general terms tended to be frequently observed in tōbyōki blogs (eg, anxiety, headache, and pain), whereas events using more technical medical terms (eg, syndrome and abnormal laboratory test result) tended to be observed frequently in the ADR database. We also confirmed the feasibility of using visualization techniques to obtain insights from unstructured text-based tōbyōki blog data. Word clouds described the characteristics of each disorder, such as "sleeping" and "anxiety" in depression and "pain" and "painful" in RA. Pharmacovigilance should maintain a strong focus on patients' actual experiences, concerns, and outcomes, and this approach can be expected to uncover hidden adverse event signals earlier and to help us understand adverse events in a patient-centered way. Patient-generated tōbyōki blogs in the TOBYO database showed unique characteristics that were different from the data in existing sources generated by health care professionals. Analysis of tōbyōki blogs would add value to the assessment of disorders with a high prevalence in women, psychiatric disorders in which subjective symptoms have important clinical meaning, refractory disorders, and other chronic disorders. ©Shinichi Matsuda, Kotonari Aoki, Shiho Tomizawa, Masayoshi Sone, Riwa Tanaka, Hiroshi Kuriki, Yoichiro Takahashi. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 24.02.2017.

Hybrid Transverse Polar Navigation for High-Precision and Long-Term INSs

PubMed Central

Wu, Qiuping; Zhang, Rong; Hu, Peida; Li, Haixia

2018-01-01

Transverse navigation has been proposed to help inertial navigation systems (INSs) fill the gap of polar navigation ability. However, as the transverse system does not have the ability of navigate globally, a complicated switch between the transverse and the traditional algorithms is necessary when the system moves across the polar circles. To maintain the inner continuity and consistency of the core algorithm, a hybrid transverse polar navigation is proposed in this research based on a combination of Earth-fixed-frame mechanization and transverse-frame outputs. Furthermore, a thorough analysis of kinematic error characteristics, proper damping technology and corresponding long-term contributions of main error sources is conducted for the high-precision INSs. According to the analytical expressions of the long-term navigation errors in polar areas, the 24-h period symmetrical oscillation with a slowly divergent amplitude dominates the transverse horizontal position errors, and the first-order drift dominates the transverse azimuth error, which results from the g0 gyro drift coefficients that occur in corresponding directions. Simulations are conducted to validate the theoretical analysis and the deduced analytical expressions. The results show that the proposed hybrid transverse navigation can ensure the same accuracy and oscillation characteristics in polar areas as the traditional algorithm in low and mid latitude regions. PMID:29757242

The short-term effects of merger on hospital operations.

PubMed Central

Alexander, J A; Halpern, M T; Lee, S Y

1996-01-01

OBJECTIVE: The short-term effects of merger on three areas of hospital operations - scale of activity, personnel/staffing practices, and operating efficiency - is examined. DATA SOURCES: Secondary data obtained from the AHA Annual Surveys (1980-1990) were applied to analyze 92 hospital mergers over the period 1982-1989. STUDY DESIGN: The study employed a multiple time-series design involving a six-year longitudinal assessment of change in hospital operating characteristics before and after merger, and a parallel analysis of change in a randomly selected group of nonmerging hospitals. DATA COLLECTION: Pooled, cross-sectional data files were constructed. Comparisons were evaluated using paired and two-sample t-tests. PRINCIPAL FINDINGS: General merger effects occurred primarily in areas related to operating efficiency. Merger resulted in slowing rates of preexisting trends, rather than dramatic improvements in operating practices. CONCLUSIONS: The short-term impact of merger was generally modest but differed by the conditions under which the merger occurred. Specifically, mergers occurring later in the study period and mergers between similarly sized hospitals displayed greater change in operating characteristics than those occurring earlier in the study period and those between hospitals of dissimilar size. Such differences are attributed respectively to increased competitive pressures after PPS and to greater opportunities for consolidation and efficiencies in mergers involving similarly sized hospitals. PMID:8591932

Hybrid Transverse Polar Navigation for High-Precision and Long-Term INSs.

PubMed

Wu, Ruonan; Wu, Qiuping; Han, Fengtian; Zhang, Rong; Hu, Peida; Li, Haixia

2018-05-12

Transverse navigation has been proposed to help inertial navigation systems (INSs) fill the gap of polar navigation ability. However, as the transverse system does not have the ability of navigate globally, a complicated switch between the transverse and the traditional algorithms is necessary when the system moves across the polar circles. To maintain the inner continuity and consistency of the core algorithm, a hybrid transverse polar navigation is proposed in this research based on a combination of Earth-fixed-frame mechanization and transverse-frame outputs. Furthermore, a thorough analysis of kinematic error characteristics, proper damping technology and corresponding long-term contributions of main error sources is conducted for the high-precision INSs. According to the analytical expressions of the long-term navigation errors in polar areas, the 24-h period symmetrical oscillation with a slowly divergent amplitude dominates the transverse horizontal position errors, and the first-order drift dominates the transverse azimuth error, which results from the gyro drift coefficients that occur in corresponding directions. Simulations are conducted to validate the theoretical analysis and the deduced analytical expressions. The results show that the proposed hybrid transverse navigation can ensure the same accuracy and oscillation characteristics in polar areas as the traditional algorithm in low and mid latitude regions.

Maximizing the spatial representativeness of NO2 monitoring data using a combination of local wind-based sectoral division and seasonal and diurnal correction factors.

PubMed

Donnelly, Aoife; Naughton, Owen; Misstear, Bruce; Broderick, Brian

2016-10-14

This article describes a new methodology for increasing the spatial representativeness of individual monitoring sites. Air pollution levels at a given point are influenced by emission sources in the immediate vicinity. Since emission sources are rarely uniformly distributed around a site, concentration levels will inevitably be most affected by the sources in the prevailing upwind direction. The methodology provides a means of capturing this effect and providing additional information regarding source/pollution relationships. The methodology allows for the division of the air quality data from a given monitoring site into a number of sectors or wedges based on wind direction and estimation of annual mean values for each sector, thus optimising the information that can be obtained from a single monitoring station. The method corrects for short-term data, diurnal and seasonal variations in concentrations (which can produce uneven weighting of data within each sector) and uneven frequency of wind directions. Significant improvements in correlations between the air quality data and the spatial air quality indicators were obtained after application of the correction factors. This suggests the application of these techniques would be of significant benefit in land-use regression modelling studies. Furthermore, the method was found to be very useful for estimating long-term mean values and wind direction sector values using only short-term monitoring data. The methods presented in this article can result in cost savings through minimising the number of monitoring sites required for air quality studies while also capturing a greater degree of variability in spatial characteristics. In this way, more reliable, but also more expensive monitoring techniques can be used in preference to a higher number of low-cost but less reliable techniques. The methods described in this article have applications in local air quality management, source receptor analysis, land-use regression mapping and modelling and population exposure studies.

An innovative partnership for national environmental assessment

USGS Publications Warehouse

Shaw, D.M.; Field, D.W.; Holm, T.M.; Jennings, M.D.; Sturdevant, J.A.; Thelin, G.P.; Worthy, L.D.

1993-01-01

Four federal environmental programs: EMAP (USEPA), GAP (USFWS), C-CAP (NOAA), NAWQA (USGS) have formed a partnership with EROS Data Center (USGS) to facilitate the development of baseline land characteristics information for the conterminous U.S. Each of the respective programs brings to the group unique experience and expertise. Despite emphasis on different environmental issues, together we have identified common requirements for source satellite data, preprocessing, spectral clustering, ancillary data, data management and distribution. We are also developing a research agenda to support this initiative and future efforts of this partnership. The short-term goal of out effort is the joint acquisition and preprocessing of recent Landsat TM images for the conterminous U.S. To date, images have been identified for acquisition, and preliminary plans have been made for preprocessing. The long-term goal for this group is collaborative research and development of a flexible and functional land characteristics database for use by our programs and others. This partnership demonstrates that national environmental programs within multiple government agencies can work effectively together to achieve common goals and reduce overall cost.

The progress about measurements of the proton beam characteristics of the JUNA 400 kV accelerator

NASA Astrophysics Data System (ADS)

Wang, Shuo; Li, Kuoang

2018-04-01

China JinPing underground Laboratory (CJPL) was established inside the tunnels piercing Jinping Mountain in Sichuan Province, China, which can provide an ideal environment for low background experiment. Jinping Underground laboratory for Nuclear Astrophysics (JUNA) is one of the major research programs in CJPL. A new 400 kV accelerator, with high current based on an ECR source, will be installed into CJPL for the study of key nuclear reactions in astrophysics. The beam characteristics of the accelerator, like absolute energy, energy spread, and long-term energy stability, will be determined by several well-known resonance and non-resonance reactions. Due to the new accelerator still being under construction, the resonance reaction of 27Al(p, γ)28Si and non-resonance 12C(p, γ)13N were studied at the 320 kV high-voltage platform of Institute of Modern Physics in Lanzhou, China. The energy spread of proton beam is about 1.0 keV and the long-term energy stability of proton beam is better than ±200eV during 4 hours measurement.

Investigation of Magnetotelluric Source Effect Based on Twenty Years of Telluric and Geomagnetic Observation

NASA Astrophysics Data System (ADS)

Kis, A.; Lemperger, I.; Wesztergom, V.; Menvielle, M.; Szalai, S.; Novák, A.; Hada, T.; Matsukiyo, S.; Lethy, A. M.

2016-12-01

Magnetotelluric method is widely applied for investigation of subsurface structures by imaging the spatial distribution of electric conductivity. The method is based on the experimental determination of surface electromagnetic impedance tensor (Z) by surface geomagnetic and telluric registrations in two perpendicular orientation. In practical explorations the accurate estimation of Z necessitates the application of robust statistical methods for two reasons:1) the geomagnetic and telluric time series' are contaminated by man-made noise components and2) the non-homogeneous behavior of ionospheric current systems in the period range of interest (ELF-ULF and longer periods) results in systematic deviation of the impedance of individual time windows.Robust statistics manage both load of Z for the purpose of subsurface investigations. However, accurate analysis of the long term temporal variation of the first and second statistical moments of Z may provide valuable information about the characteristics of the ionospheric source current systems. Temporal variation of extent, spatial variability and orientation of the ionospheric source currents has specific effects on the surface impedance tensor. Twenty year long geomagnetic and telluric recordings of the Nagycenk Geophysical Observatory provides unique opportunity to reconstruct the so called magnetotelluric source effect and obtain information about the spatial and temporal behavior of ionospheric source currents at mid-latitudes. Detailed investigation of time series of surface electromagnetic impedance tensor has been carried out in different frequency classes of the ULF range. The presentation aims to provide a brief review of our results related to long term periodic modulations, up to solar cycle scale and about eventual deviations of the electromagnetic impedance and so the reconstructed equivalent ionospheric source effects.

Atmospheric Tracer Inverse Modeling Using Markov Chain Monte Carlo (MCMC)

NASA Astrophysics Data System (ADS)

Kasibhatla, P.

2004-12-01

In recent years, there has been an increasing emphasis on the use of Bayesian statistical estimation techniques to characterize the temporal and spatial variability of atmospheric trace gas sources and sinks. The applications have been varied in terms of the particular species of interest, as well as in terms of the spatial and temporal resolution of the estimated fluxes. However, one common characteristic has been the use of relatively simple statistical models for describing the measurement and chemical transport model error statistics and prior source statistics. For example, multivariate normal probability distribution functions (pdfs) are commonly used to model these quantities and inverse source estimates are derived for fixed values of pdf paramaters. While the advantage of this approach is that closed form analytical solutions for the a posteriori pdfs of interest are available, it is worth exploring Bayesian analysis approaches which allow for a more general treatment of error and prior source statistics. Here, we present an application of the Markov Chain Monte Carlo (MCMC) methodology to an atmospheric tracer inversion problem to demonstrate how more gereral statistical models for errors can be incorporated into the analysis in a relatively straightforward manner. The MCMC approach to Bayesian analysis, which has found wide application in a variety of fields, is a statistical simulation approach that involves computing moments of interest of the a posteriori pdf by efficiently sampling this pdf. The specific inverse problem that we focus on is the annual mean CO2 source/sink estimation problem considered by the TransCom3 project. TransCom3 was a collaborative effort involving various modeling groups and followed a common modeling and analysis protocoal. As such, this problem provides a convenient case study to demonstrate the applicability of the MCMC methodology to atmospheric tracer source/sink estimation problems.

The HEMP QSO Monitoring Project

NASA Astrophysics Data System (ADS)

Welsh, William F.; Robinson, E. L.

2000-02-01

Many AGN are highly variable sources. Some of these show a pronounced time delay between variations seen in their optical continuum and in their emission lines. ``Echo mapping'' is a technique that uses these time delays to measure the geometry and kinematics of the gas inside the AGN, near the supermassive black hole. The technique is immensely powerful, but the results so far have been modest due to relatively low quality data. We have initiated a long--term project to echo map QSOs. We will examine nearby (but intrinsically faint) QSOs as well as QSOs at high redshift. The high--z QSOs present a problem: it is not known ahead of time which of these are variable sources. Thus we have started a campaign to monitor about 60 high-redshift QSOs for the purpose of determining their variability characteristics. We request SSTO time on the 0.9m telescope for long--term monitoring of high--redshift QSOs to: (i) test their suitability as viable echo mapping candidates; and (ii) measure (for the first time) their variability properties, which is of intrinsic value itself.

An overview of applied visibility fundamentals: Survey and synthesis of a visibility literature

NASA Astrophysics Data System (ADS)

1982-06-01

The concept of visibility has been defined in numerous ways. One source that is widely used in the United States describes visibility as the greatest distance at which it is just possible to see and identify selected objects or light sources with the unaided eye, or, it may be considered the distance an observer would have to back away from a target before it disappears. The process by which we see distant objects is based on the characteristics of the target, its immediate surroundings, air quality, illumination of the sight path, and the eyes and brain of the observer. Thus, four components of visibility have been noted: (1) target, (2) background, (3) atmosphere, and (4) observer. Most definitions of visibility include the observer as a key element, but it is also possible to measure visibility without the immediate presence of humans by means of instruments such as telephotometers, transmissometers, or nephelometers. Such measurements can be kept in non-dimensional terms and can be compared without human intervention. When used in the field, however, visibility sensors must be calibrated in human terms of visibility measurement.

Accuracy-preserving source term quadrature for third-order edge-based discretization

NASA Astrophysics Data System (ADS)

Nishikawa, Hiroaki; Liu, Yi

2017-09-01

In this paper, we derive a family of source term quadrature formulas for preserving third-order accuracy of the node-centered edge-based discretization for conservation laws with source terms on arbitrary simplex grids. A three-parameter family of source term quadrature formulas is derived, and as a subset, a one-parameter family of economical formulas is identified that does not require second derivatives of the source term. Among the economical formulas, a unique formula is then derived that does not require gradients of the source term at neighbor nodes, thus leading to a significantly smaller discretization stencil for source terms. All the formulas derived in this paper do not require a boundary closure, and therefore can be directly applied at boundary nodes. Numerical results are presented to demonstrate third-order accuracy at interior and boundary nodes for one-dimensional grids and linear triangular/tetrahedral grids over straight and curved geometries.

INEEL Subregional Conceptual Model Report Volume 3: Summary of Existing Knowledge of Natural and Anthropogenic Influences on the Release of Contaminants to the Subsurface Environment from Waste Source Terms at the INEEL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paul L. Wichlacz

2003-09-01

This source-term summary document is intended to describe the current understanding of contaminant source terms and the conceptual model for potential source-term release to the environment at the Idaho National Engineering and Environmental Laboratory (INEEL), as presented in published INEEL reports. The document presents a generalized conceptual model of the sources of contamination and describes the general categories of source terms, primary waste forms, and factors that affect the release of contaminants from the waste form into the vadose zone and Snake River Plain Aquifer. Where the information has previously been published and is readily available, summaries of the inventorymore » of contaminants are also included. Uncertainties that affect the estimation of the source term release are also discussed where they have been identified by the Source Term Technical Advisory Group. Areas in which additional information are needed (i.e., research needs) are also identified.« less

Common characteristics of open source software development and applicability for drug discovery: a systematic review

PubMed Central

2011-01-01

Background Innovation through an open source model has proven to be successful for software development. This success has led many to speculate if open source can be applied to other industries with similar success. We attempt to provide an understanding of open source software development characteristics for researchers, business leaders and government officials who may be interested in utilizing open source innovation in other contexts and with an emphasis on drug discovery. Methods A systematic review was performed by searching relevant, multidisciplinary databases to extract empirical research regarding the common characteristics and barriers of initiating and maintaining an open source software development project. Results Common characteristics to open source software development pertinent to open source drug discovery were extracted. The characteristics were then grouped into the areas of participant attraction, management of volunteers, control mechanisms, legal framework and physical constraints. Lastly, their applicability to drug discovery was examined. Conclusions We believe that the open source model is viable for drug discovery, although it is unlikely that it will exactly follow the form used in software development. Hybrids will likely develop that suit the unique characteristics of drug discovery. We suggest potential motivations for organizations to join an open source drug discovery project. We also examine specific differences between software and medicines, specifically how the need for laboratories and physical goods will impact the model as well as the effect of patents. PMID:21955914

A new method of optimal capacitor switching based on minimum spanning tree theory in distribution systems

NASA Astrophysics Data System (ADS)

Li, H. W.; Pan, Z. Y.; Ren, Y. B.; Wang, J.; Gan, Y. L.; Zheng, Z. Z.; Wang, W.

2018-03-01

According to the radial operation characteristics in distribution systems, this paper proposes a new method based on minimum spanning trees method for optimal capacitor switching. Firstly, taking the minimal active power loss as objective function and not considering the capacity constraints of capacitors and source, this paper uses Prim algorithm among minimum spanning trees algorithms to get the power supply ranges of capacitors and source. Then with the capacity constraints of capacitors considered, capacitors are ranked by the method of breadth-first search. In term of the order from high to low of capacitor ranking, capacitor compensation capacity based on their power supply range is calculated. Finally, IEEE 69 bus system is adopted to test the accuracy and practicality of the proposed algorithm.

FRB121102 Bursts Show Detailed Spectrotemporal Structure

NASA Astrophysics Data System (ADS)

Hessels, Jason; Seymour, Andrew; Spitler, Laura; Michilli, Daniele; Lynch, Ryan S.; Gajjar, Vishal; Gourdji, Kelly

2018-01-01

FRB121102 is a sporadic emitter of millisecond-duration radio bursts, and is associated with a compact, persistent radio source in the primary star-forming region of a dwarf galaxy at ~ 1 Gpc. Key to understanding FRB121102's physical nature is using the observed burst properties to elucidate the underlying emission mechanism and its local environment. Here we present a sample of high signal-to-noise bursts that reveal hitherto unseen spectrotemporal features. We find that the bursts are often composed of sub-bursts with finite bandwidths, and characteristic frequencies that drift downwards during the burst. While this behavior could be an intrinsic feature of the burst emission mechanism, we also discuss an interpretation in terms of plasma lensing in the source environment, similar to the pulse echoes sometimes seen from the Crab pulsar.

Survey of ion plating sources. [conferences

NASA Technical Reports Server (NTRS)

Spalvins, T.

1979-01-01

Based on the type of evaporation source, gaseous media and mode of transport, the following is discussed: resistance, electron beam, sputtering, reactive and ion beam evaporation. Ionization efficiencies and ion energies in the glow discharge determine the percentage of atoms which are ionized under typical ion plating conditions. The plating flux consists of a small number of energetic ions and a large number of energetic neutrals. The energy distribution ranges from thermal energies up to a maximum energy of the discharge. The various reaction mechanisms which contribute to the exceptionally strong adherence - formation of a graded sustrate/coating interface are not fully understood, however the controlling factors are evaluated. The influence of process variables on the nucleation and growth characteristics are illustrated in terms of morphological changes which affect the mechanical and tribological properties of the coating.

Mantle heterogeneity and crustal recycling in Archean granite-greenstone belts - Evidence from Nd isotopes and trace elements in the Rainy Lake area, Superior Province, Ontario, Canada

NASA Technical Reports Server (NTRS)

Shirey, Steven B.; Hanson, Gilbert N.

1986-01-01

Crustal evolution in the Rainy Lake area, Ontario is studied in terms of geochemical characteristics. The Nd isotope data are examined for heterogeneity of the Archean mantle, and the Sm/Nd depletion of the mantle is analyzed. The Nd isotope systematics of individual rock suites is investigated in order to understand the difference between crust and mantle sources; the precursors and petrogenetic processes are discussed. The correlation between SiO2 content and Nd values is considered. Rapid recycling of crustal components, which were previously derived from depleted mantle sources, is suggested based on the similarity of the initial Nd isotopic composition for both mantle-derived and crustally-derived rocks.

Probabilistic seismic hazard analysis for a nuclear power plant site in southeast Brazil

NASA Astrophysics Data System (ADS)

de Almeida, Andréia Abreu Diniz; Assumpção, Marcelo; Bommer, Julian J.; Drouet, Stéphane; Riccomini, Claudio; Prates, Carlos L. M.

2018-05-01

A site-specific probabilistic seismic hazard analysis (PSHA) has been performed for the only nuclear power plant site in Brazil, located 130 km southwest of Rio de Janeiro at Angra dos Reis. Logic trees were developed for both the seismic source characterisation and ground-motion characterisation models, in both cases seeking to capture the appreciable ranges of epistemic uncertainty with relatively few branches. This logic-tree structure allowed the hazard calculations to be performed efficiently while obtaining results that reflect the inevitable uncertainty in long-term seismic hazard assessment in this tectonically stable region. An innovative feature of the study is an additional seismic source zone added to capture the potential contributions of characteristics earthquake associated with geological faults in the region surrounding the coastal site.

The analysis of delays in simulator digital computing systems. Volume 1: Formulation of an analysis approach using a central example simulator model

NASA Technical Reports Server (NTRS)

Heffley, R. K.; Jewell, W. F.; Whitbeck, R. F.; Schulman, T. M.

1980-01-01

The effects of spurious delays in real time digital computing systems are examined. Various sources of spurious delays are defined and analyzed using an extant simulator system as an example. A specific analysis procedure is set forth and four cases are viewed in terms of their time and frequency domain characteristics. Numerical solutions are obtained for three single rate one- and two-computer examples, and the analysis problem is formulated for a two-rate, two-computer example.

Noise from Two-Blade Propellers

NASA Technical Reports Server (NTRS)

Stowell, E Z; Deming, A F

1936-01-01

The two-blade propeller, one of the most powerful sources of sound known, has been studied with the view of obtaining fundamental information concerning the noise emission. In order to eliminate engine noise, the propeller was mounted on an electric motor. A microphone was used to pick up the sound whose characteristics were studied electrically. The distribution of noise throughout the frequency range, as well as the spatial distribution about the propeller, was studied. The results are given in the form of polar diagrams. An appendix of common acoustical terms is included.

A simple distributed sediment delivery approach for rural catchments

NASA Astrophysics Data System (ADS)

Reid, Lucas; Scherer, Ulrike

2014-05-01

The transfer of sediments from source areas to surface waters is a complex process. In process based erosion models sediment input is thus quantified by representing all relevant sub processes such as detachment, transport and deposition of sediment particles along the flow path to the river. A successful application of these models requires, however, a large amount of spatially highly resolved data on physical catchment characteristics, which is only available for a few, well examined small catchments. For the lack of appropriate models, the empirical Universal Soil Loss Equation (USLE) is widely applied to quantify the sediment production in meso to large scale basins. As the USLE provides long-term mean soil loss rates, it is often combined with spatially lumped models to estimate the sediment delivery ratio (SDR). In these models, the SDR is related to data on morphological characteristics of the catchment such as average local relief, drainage density, proportion of depressions or soil texture. Some approaches include the relative distance between sediment source areas and the river channels. However, several studies showed that spatially lumped parameters describing the morphological characteristics are only of limited value to represent the factors of influence on sediment transport at the catchment scale. Sediment delivery is controlled by the location of the sediment source areas in the catchment and the morphology along the flow path to the surface water bodies. This complex interaction of spatially varied physiographic characteristics cannot be adequately represented by lumped morphological parameters. The objective of this study is to develop a simple but spatially distributed approach to quantify the sediment delivery ratio by considering the characteristics of the flow paths in a catchment. We selected a small catchment located in in an intensively cultivated loess region in Southwest Germany as study area for the development of the SDR approach. The flow pathways were extracted in a geographic information system. Then the sediment delivery ratio for each source area was determined using an empirical approach considering the slope, morphology and land use properties along the flow path. As a benchmark for the calibration of the model parameters we used results of a detailed process based erosion model available for the study area. Afterwards the approach was tested in larger catchments located in the same loess region.

Power System Oscillatory Behaviors: Sources, Characteristics, & Analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Follum, James D.; Tuffner, Francis K.; Dosiek, Luke A.

This document is intended to provide a broad overview of the sources, characteristics, and analyses of natural and forced oscillatory behaviors in power systems. These aspects are necessarily linked. Oscillations appear in measurements with distinguishing characteristics derived from the oscillation’s source. These characteristics determine which analysis methods can be appropriately applied, and the results from these analyses can only be interpreted correctly with an understanding of the oscillation’s origin. To describe oscillations both at their source within a physical power system and within measurements, a perspective from the boundary between power system and signal processing theory has been adopted.

The clubhouse as an empowering setting.

PubMed

Mowbray, Carol T; Lewandowski, Lisa; Holter, Mark; Bybee, Deborah

2006-08-01

Attention to psychosocial rehabilitation (PSR) practice has expanded in recent years. However, social work research studies on PSR are not numerous. This study focuses on operational characteristics of clubhouses, a major PSR program model, and the organizational attributes (including resource levels) that predict the extent to which the clubhouse constitutes an empowering setting. The authors present data from a statewide sample of 30 clubhouses, annually serving nearly 4,000 consumers (adults with serious mental illnesses), based on interviews of clubhouse directors, on-site observations, and government information sources. Results indicate that users were predominantly male, white, and middle age; about one-third had a major functional disability. There were wide variations in member characteristics as well as in resource levels. In terms of empowerment, this sample of clubs averaged rather low levels of member involvement in governance and operations but seemed to provide members with opportunities and assistance in making their own decisions. The empowerment variables had different predictors, including client characteristics, urban-related characteristics, staffing, and resource levels. Implications for social work practice in PSR settings are discussed.

A Self-Referencing Intensity-Based Fiber Optic Sensor with Multipoint Sensing Characteristics

PubMed Central

Choi, Sang-Jin; Kim, Young-Chon; Song, Minho; Pan, Jae-Kyung

2014-01-01

A self-referencing, intensity-based fiber optic sensor (FOS) is proposed and demonstrated. The theoretical analysis for the proposed design is given, and the validity of the theoretical analysis is confirmed via experiments. We define the measurement parameter, X, and the calibration factor, β, to find the transfer function, Hm,n, of the intensity-based FOS head. The self-referencing and multipoint sensing characteristics of the proposed system are validated by showing the measured Hm,n2 and relative error versus the optical power attenuation of the sensor head for four cases: optical source fluctuation, various remote sensing point distances, fiber Bragg gratings (FBGs) with different characteristics, and multiple sensor heads with cascade and/or parallel forms. The power-budget analysis and limitations of the measurement rates are discussed, and the measurement results of fiber-reinforced plastic (FRP) coupon strain using the proposed FOS are given as an actual measurement. The proposed FOS has several benefits, including a self-referencing characteristic, the flexibility to determine FBGs, and a simple structure in terms of the number of devices and measuring procedure. PMID:25046010

Effects of metals within ambient air particulate matter (PM) on human health.

PubMed

Chen, Lung Chi; Lippmann, Morton

2009-01-01

We review literature providing insights on health-related effects caused by inhalation of ambient air particulate matter (PM) containing metals, emphasizing effects associated with in vivo exposures at or near contemporary atmospheric concentrations. Inhalation of much higher concentrations, and high-level exposures via intratracheal (IT) instillation that inform mechanistic processes, are also reviewed. The most informative studies of effects at realistic exposure levels, in terms of identifying influential individual PM components or source-related mixtures, have been based on (1) human and laboratory animal exposures to concentrated ambient particles (CAPs), and (2) human population studies for which both health-related effects were observed and PM composition data were available for multipollutant regression analyses or source apportionment. Such studies have implicated residual oil fly ash (ROFA) as the most toxic source-related mixture, and Ni and V, which are characteristic tracers of ROFA, as particularly influential components in terms of acute cardiac function changes and excess short-term mortality. There is evidence that other metals within ambient air PM, such as Pb and Zn, also affect human health. Most evidence now available is based on the use of ambient air PM components concentration data, rather than actual exposures, to determine significant associations and/or effects coefficients. Therefore, considerable uncertainties about causality are associated with exposure misclassification and measurement errors. As more PM speciation data and more refined modeling techniques become available, and as more CAPs studies involving PM component analyses are performed, the roles of specific metals and other components within PM will become clearer.

Multidimensional Predictors of Treatment Outcome in Usual Care for Adolescent Conduct Problems and Substance Use

PubMed Central

Hogue, Aaron; Henderson, Craig E.; Schmidt, Adam T.

2016-01-01

This study investigated baseline client characteristics that predicted long-term treatment outcomes among adolescents referred from school and community sources and enrolled in usual care for conduct and substance use problems. Predictor effects for multiple demographic (age, sex, race/ethnicity), clinical (baseline symptom severity, comorbidity, family discord), and developmental psychopathology (behavioral dysregulation, depression, peer delinquency) characteristics were examined. Participants were 205 adolescents (52% male; mean age 15.7 years) from diverse backgrounds (59% Hispanic American, 21% African American, 15% multiracial, 6% other) residing in a large inner-city area. As expected, characteristics from all three predictor categories were related to various aspects of change in externalizing problems, delinquent acts, and substance use at one-year follow-up. The strongest predictive effect was found for baseline symptom severity: Youth with greater severity showed greater clinical gains. Higher levels of co-occurring developmental psychopathology characteristics likewise predicted better outcomes. Exploratory analyses showed that change over time in developmental psychopathology characteristics (peer delinquency, depression) was related to change in delinquent acts and substance use. Implications for serving multiproblem adolescents and tailoring treatment plans in routine care are discussed. PMID:26884380

[Knowledge identification and management in a surgery department].

PubMed

Rodríguez-Montes, José Antonio

2006-08-01

The hospital is an enterprise in which the surgery department represents a specific healthcare unit. The purpose of the surgery department, like that of any other enterprise, is assumed to be indefinite survival; to that end, it must be able to achieve and maintain a competitive advantage in the long term. Nevertheless, each surgery department, like each enterprise, can precisely define the scope of the above-mentioned terms, the main source of an enterprise's competitive advantage being its knowledge stock. Knowledge is recognized as being the basis of competitive success among institutions. This article presents the concept and classification of knowledge and discusses how it should be identified, inventoried, and managed. Special emphasis is placed on healthcare activity, since this sector presents certain characteristics distinguishing it from other sectors of economic and business activity.

Global Drainage Patterns to Modern Terrestrial Sedimentary Basins and its Influence on Large River Systems

NASA Astrophysics Data System (ADS)

Nyberg, B.; Helland-Hansen, W.

2017-12-01

Long-term preservation of alluvial sediments is dependent on the hydrological processes that deposit sediments solely within an area that has available accomodation space and net subsidence know as a sedimentary basin. An understanding of the river processes contributing to terrestrial sedimentary basins is essential to fundamentally constrain and quantify controls on the modern terrestrial sink. Furthermore, the terrestrial source to sink controls place constraints on the entire coastal, shelf and deep marine sediment routing systems. In addition, the geographical importance of modern terrestrial sedimentary basins for agriculture and human settlements has resulted in significant upstream anthropogenic catchment modification for irrigation and energy needs. Yet to our knowledge, a global catchment model depicting the drainage patterns to modern terrestrial sedimentary basins has previously not been established that may be used to address these challenging issues. Here we present a new database of 180,737 global catchments that show the surface drainage patterns to modern terrestrial sedimentary basins. This is achieved by using high resolution river networks derived from digital elevation models in relation to newly acquired maps on global modern sedimentary basins to identify terrestrial sinks. The results show that active tectonic regimes are typically characterized by larger terrestrial sedimentary basins, numerous smaller source catchments and a high source to sink relief ratio. To the contrary passive margins drain catchments to smaller terrestrial sedimentary basins, are composed of fewer source catchments that are relatively larger and a lower source to sink relief ratio. The different geomorphological characteristics of source catchments by tectonic setting influence the spatial and temporal patterns of fluvial architecture within sedimentary basins and the anthropogenic methods of exploiting those rivers. The new digital database resource is aimed to help the geoscientific community to contribute further to our quantitative understanding of source-to-sink systems and its allogenic and autogenic controls, geomorphological characteristics, terrestrial sediment transit times and the anthropogenic impact on those systems.

Personal values, marketing attitudes and nutrition trust are associated with patronage of convenience food outlets in the Asia-Pacific region: a cross-sectional study.

PubMed

De Jong, Breanna; Worsley, Anthony; Wang, Wei Chun; Sarmugam, Rani; Pham, Quynh; Februhartanty, Judhiastuty; Ridley, Stacey

2017-02-16

An online cross-sectional survey examined the relationships between the demographic characteristics, personal values, trust in sources of nutrition information and the use of convenience food outlets among middle-class household food providers in the Asia-Pacific region. The survey was administered to 3945 household food providers in Melbourne, Singapore, Shanghai, Vietnam and Indonesia in late 2013. Information about demographics, personal values, trust in sources of nutrition information and use of convenience food outlets was elicited. Exploratory factor analysis, two-step clustering and logistic regression were employed. The analyses found that the use of convenience food outlets was positively related to hedonist values and trust in food industry sources of nutrition information. However, lesser use of convenience food outlets and trust in health sources of nutrition information was associated with traditional (community-oriented) values. Further replication and extension of these findings would be useful. However, they suggest that improvements in the quality of foods sold in convenience food outlets combined with stronger regulation of food marketing and long-term food education are required.

Molecular identification of organic compounds in atmospheric complex mixtures and relationship to atmospheric chemistry and sources.

PubMed

Mazurek, Monica A

2002-12-01

This article describes a chemical characterization approach for complex organic compound mixtures associated with fine atmospheric particles of diameters less than 2.5 m (PM2.5). It relates molecular- and bulk-level chemical characteristics of the complex mixture to atmospheric chemistry and to emission sources. Overall, the analytical approach describes the organic complex mixtures in terms of a chemical mass balance (CMB). Here, the complex mixture is related to a bulk elemental measurement (total carbon) and is broken down systematically into functional groups and molecular compositions. The CMB and molecular-level information can be used to understand the sources of the atmospheric fine particles through conversion of chromatographic data and by incorporation into receptor-based CMB models. Once described and quantified within a mass balance framework, the chemical profiles for aerosol organic matter can be applied to existing air quality issues. Examples include understanding health effects of PM2.5 and defining and controlling key sources of anthropogenic fine particles. Overall, the organic aerosol compositional data provide chemical information needed for effective PM2.5 management.

Variation in perceptions of physical dominance and trustworthiness predicts individual differences in the effect of relationship context on women's preferences for masculine pitch in men's voices.

PubMed

Vukovic, Jovana; Jones, Benedict C; Feinberg, David R; Debruine, Lisa M; Smith, Finlay G; Welling, Lisa L M; Little, Anthony C

2011-02-01

Several studies have found that women tend to demonstrate stronger preferences for masculine men as short-term partners than as long-term partners, though there is considerable variation among women in the magnitude of this effect. One possible source of this variation is individual differences in the extent to which women perceive masculine men to possess antisocial traits that are less costly in short-term relationships than in long-term relationships. Consistent with this proposal, here we show that the extent to which women report stronger preferences for men with low (i.e., masculine) voice pitch as short-term partners than as long-term partners is associated with the extent to which they attribute physical dominance and low trustworthiness to these masculine voices. Thus, our findings suggest that variation in the extent to which women attribute negative personality characteristics to masculine men predicts individual differences in the magnitude of the effect of relationship context on women's masculinity preferences, highlighting the importance of perceived personality attributions for individual differences in women's judgments of men's vocal attractiveness and, potentially, their mate preferences. ©2010 The British Psychological Society.

Family Income at the Bottom and at the Top: Income Sources and Family Characteristics

PubMed Central

Raffalovich, Lawrence E.; Monnat, Shannon M.; Tsao, Hui-shien

2009-01-01

Attention has recently been focused on wealth as a source of long-term economic security and on wealth ownership as a crucial aspect of the racial economic divisions in the United States. This literature, however has been concerned primarily with the wealth gap between poor and middle-class families, and between the white and black middle class. In this paper, we investigate the incomes of families at the top and bottom of the family income distribution. We examine the sources of income and the demographic characteristics of these high-income and low-income families using family level data from the 1988-2003 Current Population Surveys. We find that, at the bottom of the distribution, transfer income is the major income source; in particular, income from social security, supplemental security, and public assistance. At the top, employment income is the largest component of family income. Non-white, female, and non-married householders are disproportionately located at the bottom of the family income distribution. These families consist of both young and old adults, with high-school educations or less, in low-level service occupations. Many are disabled, many are retired. Householders at the top of the income distribution are typically male, white, and married. Householders and spouses at the top are typically middle-age, with college educations, employed in professional service and managerial occupations. We find that wealth is not an important source of income for families at the highest percentiles. The highest income families during this period in the U.S. were not a “property elite”: their income is mostly from employment. We speculate, however, that they will join the “property elite” later in the life-course as they retire and receive income from their investments. PMID:20161570

Family Income at the Bottom and at the Top: Income Sources and Family Characteristics.

PubMed

Raffalovich, Lawrence E; Monnat, Shannon M; Tsao, Hui-Shien

2009-12-01

Attention has recently been focused on wealth as a source of long-term economic security and on wealth ownership as a crucial aspect of the racial economic divisions in the United States. This literature, however has been concerned primarily with the wealth gap between poor and middle-class families, and between the white and black middle class. In this paper, we investigate the incomes of families at the top and bottom of the family income distribution. We examine the sources of income and the demographic characteristics of these high-income and low-income families using family level data from the 1988-2003 Current Population Surveys.We find that, at the bottom of the distribution, transfer income is the major income source; in particular, income from social security, supplemental security, and public assistance. At the top, employment income is the largest component of family income. Non-white, female, and non-married householders are disproportionately located at the bottom of the family income distribution. These families consist of both young and old adults, with high-school educations or less, in low-level service occupations. Many are disabled, many are retired. Householders at the top of the income distribution are typically male, white, and married. Householders and spouses at the top are typically middle-age, with college educations, employed in professional service and managerial occupations.We find that wealth is not an important source of income for families at the highest percentiles. The highest income families during this period in the U.S. were not a "property elite": their income is mostly from employment. We speculate, however, that they will join the "property elite" later in the life-course as they retire and receive income from their investments.

Apparatus and methods for determining at least one characteristic of a proximate environment

DOEpatents

Novascone, Stephen R.; West, Phillip B.; Anderson, Michael J.

2008-04-15

Methods and an apparatus for determining at least one characteristic of an environment are disclosed. A vibrational energy may be imparted into an environment and a magnitude of damping of the vibrational energy may be measured and at least one characteristic of the environment may be determined. Particularly, a vibratory source may be operated and coupled to an environment. At least one characteristic of the environment may be determined based on a shift in at least one steady-state frequency of oscillation of the vibratory source. An apparatus may include at least one vibratory source and a structure for positioning the at least one vibratory source proximate to an environment. Further, the apparatus may include an analysis device for determining at least one characteristic of the environment based at least partially upon shift in a steady-state oscillation frequency of the vibratory source for the given impetus.

A novel integrated approach for the hazardous radioactive dust source terms estimation in future nuclear fusion power plants.

PubMed

Poggi, L A; Malizia, A; Ciparisse, J F; Gaudio, P

2016-10-01

An open issue still under investigation by several international entities working on the safety and security field for the foreseen nuclear fusion reactors is the estimation of source terms that are a hazard for the operators and public, and for the machine itself in terms of efficiency and integrity in case of severe accident scenarios. Source term estimation is a crucial key safety issue to be addressed in the future reactors safety assessments, and the estimates available at the time are not sufficiently satisfactory. The lack of neutronic data along with the insufficiently accurate methodologies used until now, calls for an integrated methodology for source term estimation that can provide predictions with an adequate accuracy. This work proposes a complete methodology to estimate dust source terms starting from a broad information gathering. The wide number of parameters that can influence dust source term production is reduced with statistical tools using a combination of screening, sensitivity analysis, and uncertainty analysis. Finally, a preliminary and simplified methodology for dust source term production prediction for future devices is presented.

Characteristics of sound radiation from turbulent premixed flames

NASA Astrophysics Data System (ADS)

Rajaram, Rajesh

Turbulent combustion processes are inherently unsteady and, thus, a source of acoustic radiation, which occurs due to the unsteady expansion of reacting gases. While prior studies have extensively characterized the total sound power radiated by turbulent flames, their spectral characteristics are not well understood. The objective of this research work is to measure the flow and acoustic properties of an open turbulent premixed jet flame and explain the spectral trends of combustion noise. The flame dynamics were characterized using high speed chemiluminescence images of the flame. A model based on the solution of the wave equation with unsteady heat release as the source was developed and was used to relate the measured chemiluminescence fluctuations to its acoustic emission. Acoustic measurements were performed in an anechoic environment for several burner diameters, flow velocities, turbulence intensities, fuels, and equivalence ratios. The acoustic emissions are shown to be characterized by four parameters: peak frequency (Fpeak), low frequency slope (beta), high frequency slope (alpha) and Overall Sound Pressure Level (OASPL). The peak frequency (Fpeak) is characterized by a Strouhal number based on the mean velocity and a flame length. The transfer function between the acoustic spectrum and the spectrum of heat release fluctuations has an f2 dependence at low frequencies, while it converged to a constant value at high frequencies. Furthermore, the OASPL was found to be characterized by (Fpeak mfH)2, which resembles the source term in the wave equation.

Effect of wine addition on microbiological characteristics, volatile molecule profiles and biogenic amine contents in fermented sausages.

PubMed

Coloretti, Fabio; Tabanelli, Giulia; Chiavari, Cristiana; Lanciotti, Rosalba; Grazia, Luigi; Gardini, Fausto; Montanari, Chiara

2014-03-01

The aim was to evaluate the effect of wine addition during manufacturing of dry fermented sausages, in terms of safety aspects (biogenic amine accumulation), aroma profile and sensory characteristics. Three batches of salami were produced: without wine addition and with 7.5% or 15% (v/w) of white wine. The fermented sausages showed characteristics that can increase product diversification. Some of the sensory features (i.e. increased salty perception) can represent an important strategy because of the trend to reduce salt intake for health reasons. The presence of wine immediately reduced the pH and is a source of ethanol, which can have an inhibitory effect against undesirable microflora. The microbiological results observed regarding Enterobacteriaceae and enterococci were encouraging. The addition of wine did not negatively affect the ripening time or increase the presence of biogenic amines. The samples containing wine showed reduced concentrations of putrescine. Copyright © 2013 Elsevier Ltd. All rights reserved.

Application of multiple tracers (SF6 and chloride) to identify the transport by characteristics of contaminant at two separate contaminated sites

NASA Astrophysics Data System (ADS)

Lee, K. K.; Lee, S. S.; Kim, H. H.; Koh, E. H.; Kim, M. O.; Lee, K.; Kim, H. J.

2016-12-01

Multiple tracers were applied for source and pathway detection at two different sites. CO2 gas injected in the subsurface for a shallow-depth CO2 injection and leak test can be regarded as a potential contaminant source. Therefore, it is necessary to identify the migration pattern of CO2 gas. Also, at a DNAPL contaminated site, it is important to figure out the characteristics of plume evolution from the source zone. In this study, multiple tracers (SF6 and chloride) were used to evaluate the applicability of volatile and non-volatile tracers and to identify the characteristics of contaminant transport at each CO2 injection and leak test site and DNAPL contaminated site. Firstly, at the CO2 test site, multiple tracers were used to perform the single well push-drift-pull tracer test at total 3 specific depth zones. As results of tests, volatile and non-volatile tracers showed different mass recovery percentage. Most of chloride mass was recovered but less than half of SF6 mass was recovered due to volatile property. This means that only gaseous SF6 leak out to unsaturated zone. However, breakthrough curves of both tracers indicated similar peak time, effective porosity, and regional groundwater velocity. Also, at both contaminated sites, natural gradient tracer tests were performed with multiple tracers. With the results of natural gradient tracer test, it was possible to confirm the applicability of multiple tracers and to understand the contaminant transport in highly heterogeneous aquifer systems through the long-term monitoring of tracers. Acknowledgement: financial support was provided by the R&D Project on Environmental Management of Geologic CO2 Storage)" from the KEITI (Project Number: 2014001810003) and Korea Ministry of Environment as "The GAIA project (2014000540010)".

Cramer-Rao bound analysis of wideband source localization and DOA estimation

NASA Astrophysics Data System (ADS)

Yip, Lean; Chen, Joe C.; Hudson, Ralph E.; Yao, Kung

2002-12-01

In this paper, we derive the Cramér-Rao Bound (CRB) for wideband source localization and DOA estimation. The resulting CRB formula can be decomposed into two terms: one that depends on the signal characteristic and one that depends on the array geometry. For a uniformly spaced circular array (UCA), a concise analytical form of the CRB can be given by using some algebraic approximation. We further define a DOA beamwidth based on the resulting CRB formula. The DOA beamwidth can be used to design the sampling angular spacing for the Maximum-likelihood (ML) algorithm. For a randomly distributed array, we use an elliptical model to determine the largest and smallest effective beamwidth. The effective beamwidth and the CRB analysis of source localization allow us to design an efficient algorithm for the ML estimator. Finally, our simulation results of the Approximated Maximum Likelihood (AML) algorithm are demonstrated to match well to the CRB analysis at high SNR.

Intelligent Energy Management System for PV-Battery-based Microgrids in Future DC Homes

NASA Astrophysics Data System (ADS)

Chauhan, R. K.; Rajpurohit, B. S.; Gonzalez-Longatt, F. M.; Singh, S. N.

2016-06-01

This paper presents a novel intelligent energy management system (IEMS) for a DC microgrid connected to the public utility (PU), photovoltaic (PV) and multi-battery bank (BB). The control objectives of the proposed IEMS system are: (i) to ensure the load sharing (according to the source capacity) among sources, (ii) to reduce the power loss (high efficient) in the system, and (iii) to enhance the system reliability and power quality. The proposed IEMS is novel because it follows the ideal characteristics of the battery (with some assumptions) for the power sharing and the selection of the closest source to minimize the power losses. The IEMS allows continuous and accurate monitoring with intelligent control of distribution system operations such as battery bank energy storage (BBES) system, PV system and customer utilization of electric power. The proposed IEMS gives the better operational performance for operating conditions in terms of load sharing, loss minimization, and reliability enhancement of the DC microgrid.

On multidisciplinary research on the application of remote sensing to water resources problems. [Wisconsin

NASA Technical Reports Server (NTRS)

Clapp, J. L.

1973-01-01

Research objectives during 1972-73 were to: (1) Ascertain the extent to which special aerial photography can be operationally used in monitoring water pollution parameters. (2) Ascertain the effectiveness of remote sensing in the investigation of nearshore mixing and coastal entrapment in large water bodies. (3) Develop an explicit relationship of the extent of the mixing zone in terms of the outfall, effluent and water body characteristics. (4) Develop and demonstrate the use of the remote sensing method as an effective legal implement through which administrative agencies and courts can not only investigate possible pollution sources but also legally prove the source of water pollution. (5) Evaluate the field potential of remote sensing techniques in monitoring algal blooms and aquatic macrophytes, and the use of these as indicators of lake eutrophication level. (6) Develop a remote sensing technique for the determination of the location and extent of hydrologically active source areas in a watershed.

Preliminary assessment of streamflow characteristics for selected streams at Fort Gordon, Georgia, 1999-2000

USGS Publications Warehouse

Stamey, Timothy C.

2001-01-01

In 1999, the U.S. Geological Survey, in cooperation with the U.S. Army Signal Center and Fort Gordon, began collection of periodic streamflow data at four streams on the military base to assess and estimate streamflow characteristics of those streams for potential water-supply sources. Simple and reliable methods of determining streamflow characteristics of selected streams on the military base are needed for the initial implementation of the Fort Gordon Integrated Natural Resources Management Plan. Long-term streamflow data from the Butler Creek streamflow gaging station were used along with several concurrent discharge measurements made at three selected partial-record streamflow stations on Fort Gordon to determine selected low-flow streamflow characteristics. Streamflow data were collected and analyzed using standard U.S. Geological Survey methods and computer application programs to verify the use of simple drainage area to discharge ratios, which were used to estimate the low-flow characteristics for the selected streams. Low-flow data computed based on daily mean streamflow include: mean discharges for consecutive 1-, 3-, 7-, 14-, and 30-day period and low-flow estimates of 7Q10, 30Q2, 60Q2, and 90Q2 recurrence intervals. Flow-duration data also were determined for the 10-, 30-, 50-, 70-, and 90-percent exceedence flows. Preliminary analyses of the streamflow indicate that the flow duration and selected low-flow statistics for the selected streams averages from about 0.15 to 2.27 cubic feet per square mile. The long-term gaged streamflow data indicate that the streamflow conditions for the period analyzed were in the 50- to 90-percent flow range, or in which streamflow would be exceeded about 50 to 90 percent of the time.

Inverse analysis and regularisation in conditional source-term estimation modelling

NASA Astrophysics Data System (ADS)

Labahn, Jeffrey W.; Devaud, Cecile B.; Sipkens, Timothy A.; Daun, Kyle J.

2014-05-01

Conditional Source-term Estimation (CSE) obtains the conditional species mass fractions by inverting a Fredholm integral equation of the first kind. In the present work, a Bayesian framework is used to compare two different regularisation methods: zeroth-order temporal Tikhonov regulatisation and first-order spatial Tikhonov regularisation. The objectives of the current study are: (i) to elucidate the ill-posedness of the inverse problem; (ii) to understand the origin of the perturbations in the data and quantify their magnitude; (iii) to quantify the uncertainty in the solution using different priors; and (iv) to determine the regularisation method best suited to this problem. A singular value decomposition shows that the current inverse problem is ill-posed. Perturbations to the data may be caused by the use of a discrete mixture fraction grid for calculating the mixture fraction PDF. The magnitude of the perturbations is estimated using a box filter and the uncertainty in the solution is determined based on the width of the credible intervals. The width of the credible intervals is significantly reduced with the inclusion of a smoothing prior and the recovered solution is in better agreement with the exact solution. The credible intervals for temporal and spatial smoothing are shown to be similar. Credible intervals for temporal smoothing depend on the solution from the previous time step and a smooth solution is not guaranteed. For spatial smoothing, the credible intervals are not dependent upon a previous solution and better predict characteristics for higher mixture fraction values. These characteristics make spatial smoothing a promising alternative method for recovering a solution from the CSE inversion process.

Evaluation of anticancer agents using patient-derived tumor organoids characteristically similar to source tissues.

PubMed

Tamura, Hirosumi; Higa, Arisa; Hoshi, Hirotaka; Hiyama, Gen; Takahashi, Nobuhiko; Ryufuku, Masae; Morisawa, Gaku; Yanagisawa, Yuka; Ito, Emi; Imai, Jun-Ichi; Dobashi, Yuu; Katahira, Kiyoaki; Soeda, Shu; Watanabe, Takafumi; Fujimori, Keiya; Watanabe, Shinya; Takagi, Motoki

2018-06-18

Patient-derived tumor xenograft models represent a promising preclinical cancer model that better replicates disease, compared with traditional cell culture; however, their use is low-throughput and costly. To overcome this limitation, patient-derived tumor organoids (PDOs) were established from human lung, ovarian and uterine tumor tissues, among others, to accurately and efficiently recapitulate the tissue architecture and function. PDOs were able to be cultured for >6 months, and formed cell clusters with similar morphologies to their source tumors. Comparative histological and comprehensive gene expression analyses proved that the characteristics of PDOs were similar to those of their source tumors, even following long-term expansion in culture. At present, 53 PDOs have been established by the Fukushima Translational Research Project, and were designated as Fukushima PDOs (F‑PDOs). In addition, the in vivo tumorigenesis of certain F‑PDOs was confirmed using a xenograft model. The present study represents a detailed analysis of three F‑PDOs (termed REME9, 11 and 16) established from endometrial cancer tissues. These were used for cell growth inhibition experiments using anticancer agents. A suitable high-throughput assay system, with 96- or 384‑well plates, was designed for each F‑PDO, and the efficacy of the anticancer agents was subsequently evaluated. REME9 and 11 exhibited distinct responses and increased resistance to the drugs, as compared with conventional cancer cell lines (AN3 CA and RL95-2). REME9 and 11, which were established from tumors that originated in patients who did not respond to paclitaxel and carboplatin (the standard chemotherapy for endometrial cancer), exhibited high resistance (half-maximal inhibitory concentration >10 µM) to the two agents. Therefore, assay systems using F‑PDOs may be utilized to evaluate anticancer agents using conditions that better reflect clinical conditions, compared with conventional methods using cancer cell lines, and to discover markers that identify the pharmacological effects of anticancer agents.

Application of an integrated Weather Research and Forecasting (WRF)/CALPUFF modeling tool for source apportionment of atmospheric pollutants for air quality management: A case study in the urban area of Benxi, China.

PubMed

Wu, Hao; Zhang, Yan; Yu, Qi; Ma, Weichun

2018-04-01

In this study, the authors endeavored to develop an effective framework for improving local urban air quality on meso-micro scales in cities in China that are experiencing rapid urbanization. Within this framework, the integrated Weather Research and Forecasting (WRF)/CALPUFF modeling system was applied to simulate the concentration distributions of typical pollutants (particulate matter with an aerodynamic diameter <10 μm [PM 10 ], sulfur dioxide [SO 2 ], and nitrogen oxides [NO x ]) in the urban area of Benxi. Statistical analyses were performed to verify the credibility of this simulation, including the meteorological fields and concentration fields. The sources were then categorized using two different classification methods (the district-based and type-based methods), and the contributions to the pollutant concentrations from each source category were computed to provide a basis for appropriate control measures. The statistical indexes showed that CALMET had sufficient ability to predict the meteorological conditions, such as the wind fields and temperatures, which provided meteorological data for the subsequent CALPUFF run. The simulated concentrations from CALPUFF showed considerable agreement with the observed values but were generally underestimated. The spatial-temporal concentration pattern revealed that the maximum concentrations tended to appear in the urban centers and during the winter. In terms of their contributions to pollutant concentrations, the districts of Xihu, Pingshan, and Mingshan all affected the urban air quality to different degrees. According to the type-based classification, which categorized the pollution sources as belonging to the Bengang Group, large point sources, small point sources, and area sources, the source apportionment showed that the Bengang Group, the large point sources, and the area sources had considerable impacts on urban air quality. Finally, combined with the industrial characteristics, detailed control measures were proposed with which local policy makers could improve the urban air quality in Benxi. In summary, the results of this study showed that this framework has credibility for effectively improving urban air quality, based on the source apportionment of atmospheric pollutants. The authors endeavored to build up an effective framework based on the integrated WRF/CALPUFF to improve the air quality in many cities on meso-micro scales in China. Via this framework, the integrated modeling tool is accurately used to study the characteristics of meteorological fields, concentration fields, and source apportionments of pollutants in target area. The impacts of classified sources on air quality together with the industrial characteristics can provide more effective control measures for improving air quality. Through the case study, the technical framework developed in this study, particularly the source apportionment, could provide important data and technical support for policy makers to assess air pollution on the scale of a city in China or even the world.

A Composite Source Model With Fractal Subevent Size Distribution

NASA Astrophysics Data System (ADS)

Burjanek, J.; Zahradnik, J.

A composite source model, incorporating different sized subevents, provides a pos- sible description of complex rupture processes during earthquakes. The number of subevents with characteristic dimension greater than R is proportional to R-2. The subevents do not overlap with each other, and the sum of their areas equals to the area of the target event (e.g. mainshock) . The subevents are distributed randomly over the fault. Each subevent is modeled as a finite source, using kinematic approach (radial rupture propagation, constant rupture velocity, boxcar slip-velocity function, with constant rise time on the subevent). The final slip at each subevent is related to its characteristic dimension, using constant stress-drop scaling. Variation of rise time with subevent size is a free parameter of modeling. The nucleation point of each subevent is taken as the point closest to mainshock hypocentre. The synthetic Green's functions are calculated by the discrete-wavenumber method in a 1D horizontally lay- ered crustal model in a relatively coarse grid of points covering the fault plane. The Green's functions needed for the kinematic model in a fine grid are obtained by cu- bic spline interpolation. As different frequencies may be efficiently calculated with different sampling, the interpolation simplifies and speeds-up the procedure signifi- cantly. The composite source model described above allows interpretation in terms of a kinematic model with non-uniform final slip and rupture velocity spatial distribu- tions. The 1994 Northridge earthquake (Mw = 6.7) is used as a validation event. The strong-ground motion modeling of the 1999 Athens earthquake (Mw = 5.9) is also performed.

Characterizing Dissolved Organic Matter (DOM) Isolated From Specific Allochthonous and Autochthonous Sources in a North-Temperate Stream Ecosystem

NASA Astrophysics Data System (ADS)

Wong, J. C.; Williams, D.

2009-05-01

Detrital energy in temperate headwater streams is mainly derived from the annual input of leaf litter from the surrounding landscape. Presumably, its decomposition and other sources of autochthonous organic matter will change dissolved organic carbon (DOC) concentrations and dissolved organic matter (DOM) quality. To investigate this, DOM was leached from two allochthonous sources: white birch (Betula papyrifera) and white cedar (Thuja occidentalis); and one autochthonous source, streambed biofilm, for a period of 7 days on 3 separate occasions in fall 2007. As a second treatment, microorganisms from the water column were filtered out. Deciduous leaf litter was responsible for high, short-term increases to DOC concentrations whereas the amounts leached from conifer needles were relatively constant in each month. Using UV spectroscopy, changes to DOM characteristics like aromaticity, spectral slopes, and molecular weight were mainly determined by source and indicated a preferential use of the labile DOM pool by the microorganisms. Excitation-emission matrices (EEMs) collected using fluorescence spectroscopy suggested that cedar litter was an important source of protein-like fluorescence and that the nature of the fluorescing DOM components changed in the presence of microorganisms. This study demonstrates that simultaneous examination of DOC concentrations and DOM quality will allow a better understanding of the carbon dynamics that connect terrestrial with aquatic ecosystems.

Volatile Organic Compounds: Characteristics, distribution and sources in urban schools

NASA Astrophysics Data System (ADS)

Mishra, Nitika; Bartsch, Jennifer; Ayoko, Godwin A.; Salthammer, Tunga; Morawska, Lidia

2015-04-01

Long term exposure to organic pollutants, both inside and outside school buildings may affect children's health and influence their learning performance. Since children spend significant amount of time in school, air quality, especially in classrooms plays a key role in determining the health risks associated with exposure at schools. Within this context, the present study investigated the ambient concentrations of Volatile Organic Compounds (VOCs) in 25 primary schools in Brisbane with the aim to quantify the indoor and outdoor VOCs concentrations, identify VOCs sources and their contribution, and based on these; propose mitigation measures to reduce VOCs exposure in schools. One of the most important findings is the occurrence of indoor sources, indicated by the I/O ratio >1 in 19 schools. Principal Component Analysis with Varimax rotation was used to identify common sources of VOCs and source contribution was calculated using an Absolute Principal Component Scores technique. The result showed that outdoor 47% of VOCs were contributed by petrol vehicle exhaust but the overall cleaning products had the highest contribution of 41% indoors followed by air fresheners and art and craft activities. These findings point to the need for a range of basic precautions during the selection, use and storage of cleaning products and materials to reduce the risk from these sources.

Energy droughts in a 100% renewable electricity mix

NASA Astrophysics Data System (ADS)

Raynaud, Damien; Hingray, Benoît; François, Baptiste; Creutin, Jean-Dominique

2017-04-01

During the 21st conference of parties, 175 countries agreed on limiting the temperature increase due to global warming to 2°C above preindustrial levels. Such an ambitious goal necessitates a deep transformation of our society in order to reduce greenhouse gas (GHG) emissions. Europe has started its energy transition years ago by, for instance, increasing the share of renewables in the European electricity generation and should continue in this direction. Variable renewable energies (VRE) and especially those driven by weather conditions (namely wind, solar and hydro power from river flow), are expected to play a key role in achieving the GHG reduction target. However, these renewables are often criticized for their intermittency and for the resulting difficult integration in the power supply system, especially for large shares of VRE in the energy mix. Assessing the feasibility of electricity generation using large contributions of VRE requires a deep understanding and characterization of the VRE spatiotemporal variations. In the last decade, many studies have focused on the short-term intermittency of VRE generation, but the persistency and the characteristics of periods of low/high electricity generation have been rarely studied. Yet, these particular situations require some demanding adaptations of the power supply system in term of back-up sources or production curtailment respectively. This study focuses on what we call "energy droughts" which, by analogy with hydrological or meteorological droughts, are defined as periods of very low energy production. We consider in turn "energy droughts" associated to wind, solar and hydro power (run-of-the-river). Their characteristics are estimated for 12 European regions being subjected to different climatic regimes. For each region and energy source, "droughts" are evaluated from a 30-yr time series of power generation (1983-2012). These series are simulated by using a suite of weather-to-energy conversion models with generic power systems (generic wind, solar and hydro power plant) and observations or pseudo-observations of meteorological drivers. The daily river discharge series required for hydro power are generated using a hydrological model. Our results demonstrate the diversity of characteristics of energy droughts not only from one energy source to the other, but also depending on the region and on the season considered. Wind power generally presents short but frequent energy droughts whereas hydro-power-related droughts are rare but generally long lasting. Solar power is mainly driven by the length of daytime resulting in long winter "solar drought" in Northern regions. We finally assess the energy droughts characteristics of an energy mix for which the three VRE sources are combined. The proportions of wind, solar and hydro power considered in the regional mixes are based on the work of François et al. (2016b). Mixing VRE sources efficiently reduces both duration and frequency of energy droughts leading to a more reliable power supply. References : François, B., Hingray, B., Raynaud, D., Borga, M., Creutin, J.D., 2016b. Increasing climate-related-energy penetration by integrating run-of-the river hydropower to wind/solar mix. Renew. Energy 87, 686-696. doi:10.1016/j.renene.2015.10.064

Atmospheric particulate emissions from dry abrasive blasting using coal slag.

PubMed

Kura, Bhaskar; Kambham, Kalpalatha; Sangameswaran, Sivaramakrishnan; Potana, Sandhya

2006-08-01

Coal slag is one of the widely used abrasives in dry abrasive blasting. Atmospheric emissions from this process include particulate matter (PM) and heavy metals, such as chromium, lead, manganese, nickel. Quantities and characteristics of PM emissions depend on abrasive characteristics and process parameters. Emission factors are key inputs to estimate emissions. Experiments were conducted to study the effect of blast pressure, abrasive feed rate, and initial surface contamination on total PM (TPM) emission factors for coal slag. Rusted and painted mild steel surfaces were used as base plates. Blasting was carried out in an enclosed chamber, and PM was collected from an exhaust duct using U.S. Environment Protection Agency source sampling methods for stationary sources. Results showed that there is significant effect of blast pressure, feed rate, and surface contamination on TPM emissions. Mathematical equations were developed to estimate emission factors in terms of mass of emissions per unit mass of abrasive used, as well as mass of emissions per unit of surface area cleaned. These equations will help industries in estimating PM emissions based on blast pressure and abrasive feed rate. In addition, emissions can be reduced by choosing optimum operating conditions.

The 1979 X-ray outburst of Centaurus X-4

NASA Technical Reports Server (NTRS)

Kaluzienski, L. J.; Holt, S. S.; Swank, J. H.

1980-01-01

X-ray observations of the first major outburst of the classical transient X-ray source Centaurus X-4 since its discovery in 1969 are presented. The observations were obtained in May, 1979, with the all-sky monitor on board Ariel 5. The flare light curve is shown to exhibit many of the characteristics of other transients, including a double-peaked maximum, as well as significant, apparently random, variations and a lower peak flux and shorter duration than the 1969 event. Application of a standard epoch-folding technique to data corrected for linear decay trends indicates a possible source modulation at 0.3415 days (8.2 hours). Comparison of the results with previous other data on Cen X-4 and the characteristics of the soft X-ray transients allows a total X-ray output of approximately 3 x 10 to the 43rd ergs to be estimated, and reveals the duration and decay time of the 1979 Cen X-4 outburst to be the shortest yet observed from soft X-ray transients. The observations are explained in terms of episodic mass exchange from a late-type dwarf onto a neutron star companion in a relatively close binary system.

Understanding the Laminar Distribution of Tropospheric Ozone from Ground-Based, Airborne, Spaceborne, and Modeling Perspectives

NASA Technical Reports Server (NTRS)

Newchurch, Mike; Johnson, Matthew S.; Huang, Guanyu; Kuang, Shi; Wang, Lihua; Chance, Kelly; Liu, Xiong

2016-01-01

Laminar ozone structure is a ubiquitous feature of tropospheric-ozone distributions resulting from dynamic and chemical atmospheric processes. Understanding the characteristics of these ozone laminae and the mechanisms responsible for producing them is important to outline the transport pathways of trace gases and to quantify the impact of different sources on tropospheric background ozone. In this study, we present a new method to detect ozone laminae to understand their climatological characteristics of occurrence frequency in terms of thickness and altitude. We employ both ground-based and airborne ozone lidar measurements and other synergistic observations and modeling to investigate the sources and mechanisms such as biomass burning transport, stratospheric intrusion, lightning-generated NOx, and nocturnal low-level jets that are responsible for depleted or enhanced tropospheric ozone layers. Spaceborne (e.g., OMI (Ozone Monitoring Instrument), TROPOMI (Tropospheric Monitoring Instrument), TEMPO (Tropospheric Emissions: Monitoring of Pollution)) measurements of these laminae will observe greater horizontal extent and lower vertical resolution than balloon-borne or lidar measurements will quantify. Using integrated ground-based, airborne, and spaceborne observations in a modeling framework affords insight into how to gain knowledge of both the vertical and horizontal evolution of these ubiquitous ozone laminae.

Laser induced heat source distribution in bio-tissues

NASA Astrophysics Data System (ADS)

Li, Xiaoxia; Fan, Shifu; Zhao, Youquan

2006-09-01

During numerical simulation of laser and tissue thermal interaction, the light fluence rate distribution should be formularized and constituted to the source term in the heat transfer equation. Usually the solution of light irradiative transport equation is given in extreme conditions such as full absorption (Lambert-Beer Law), full scattering (Lubelka-Munk theory), most scattering (Diffusion Approximation) et al. But in specific conditions, these solutions will induce different errors. The usually used Monte Carlo simulation (MCS) is more universal and exact but has difficulty to deal with dynamic parameter and fast simulation. Its area partition pattern has limits when applying FEM (finite element method) to solve the bio-heat transfer partial differential coefficient equation. Laser heat source plots of above methods showed much difference with MCS. In order to solve this problem, through analyzing different optical actions such as reflection, scattering and absorption on the laser induced heat generation in bio-tissue, a new attempt was made out which combined the modified beam broaden model and the diffusion approximation model. First the scattering coefficient was replaced by reduced scattering coefficient in the beam broaden model, which is more reasonable when scattering was treated as anisotropic scattering. Secondly the attenuation coefficient was replaced by effective attenuation coefficient in scattering dominating turbid bio-tissue. The computation results of the modified method were compared with Monte Carlo simulation and showed the model provided reasonable predictions of heat source term distribution than past methods. Such a research is useful for explaining the physical characteristics of heat source in the heat transfer equation, establishing effective photo-thermal model, and providing theory contrast for related laser medicine experiments.

Understanding Dry Bias in the Simulations of Indian Monsoon by CFSv2 Through Analysis of Moisture Transport

NASA Astrophysics Data System (ADS)

Saheer, Sahana; Pathak, Amey; Mathew, Roxy; Ghosh, Subimal

2016-04-01

Simulations of Indian Summer Monsoon (ISM) with its seasonal and subseasonal characteristics is highly crucial for predictions/ projections towards sustainable agricultural planning and water resources management. The Climate forecast system version 2 (CFSv2), the state of the art coupled climate model developed by National Center for Environmental Prediction (NCEP), is evaluated here for the simulations of ISM. Even though CFSv2 is a fully coupled ocean-atmosphere-land model with advanced physics, increased resolution and refined initialization, its ISM simulations/ predictions/ projections, in terms of seasonal mean and variability are not satisfactory. Numerous works have been done for verifying the CFSv2 forecasts in terms of the seasonal mean, its mean and variability, active and break spells, and El Nino Southern Oscillation (ENSO)-monsoon interactions. Underestimation of JJAS precipitation over the Indian land mass is one of the major drawbacks of CFSv2. ISM gets the moisture required to maintain the precipitation from different oceanic and land sources. In this work, we find the fraction of moisture supplied by different sources in the CFSv2 simulations and the findings are compared with observed fractions. We also investigate the possible variations in the moisture contributions from these different sources. We suspect that the deviation in the relative moisture contribution from different sources to various sinks over the monsoon region has resulted in the observed dry bias. We also find that over the Arabian Sea region, which is the key moisture source of ISM, there is a premature built up of specific humidity during the month of May and a decline during the later months of JJAS. This is also one of the reasons for the underestimation of JJAS mean precipitation.

Gravitational Radiation Characteristics of Nonspinning Black-Hole Binaries

NASA Technical Reports Server (NTRS)

Kelly, B. J.; Baker, J. G.; Boggs, W. D.; Centrella, J. M.; vanMeter, J. R.; McWilliams, S. T.

2008-01-01

We present a detailed descriptive analysis of the gravitational radiation from binary mergers of non-spinning black holes, based on numerical relativity simulations of systems varying from equal-mass to a 6:1 mass ratio. Our analysis covers amplitude and phase characteristics of the radiation, suggesting a unified picture of the waveforms' dominant features in terms of an implicit rotating source, applying uniformly to the full wavetrain, from inspiral through ringdown. We construct a model of the late-stage frequency evolution that fits the l = m modes, and identify late-time relationships between waveform frequency and amplitude. These relationships allow us to construct a predictive model for the late-time waveforms, an alternative to the common practice of modelling by a sum of quasinormal mode overtones. We demonstrate an application of this in a new effective-one-body-based analytic waveform model.

Use of speckle for determining the response characteristics of Doppler imaging radars

NASA Technical Reports Server (NTRS)

Tilley, D. G.

1986-01-01

An optical model is developed for imaging optical radars such as the SAR on Seasat and the Shuttle Imaging Radar (SIR-B) by analyzing the Doppler shift of individual speckles in the image. The signal received at the spacecraft is treated in terms of a Fresnel-Kirchhoff integration over all backscattered radiation within a Huygen aperture at the earth. Account is taken of the movement of the spacecraft along the orbital path between emission and reception. The individual points are described by integration of the point source amplitude with a Green's function scattering kernel. Doppler data at each point furnishes the coordinates for visual representations. A Rayleigh-Poisson model of the surface scattering characteristics is used with Monte Carlo methods to generate simulations of Doppler radar speckle that compare well with Seasat SAR data SIR-B data.

Seasonal variations of infrasonic arrivals from long-term ground truth observations in Nevada and implication for event location

NASA Astrophysics Data System (ADS)

Negraru, Petru; Golden, Paul

2017-04-01

Long-term ground truth observations were collected at two infrasound arrays in Nevada to investigate how seasonal atmospheric variations affect the detection, traveltime and signal characteristics (azimuth, trace velocity, frequency content and amplitudes) of infrasonic arrivals at regional distances. The arrays were located in different azimuthal directions from a munition disposal facility in Nevada. FNIAR, located 154 km north of the source has a high detection rate throughout the year. Over 90 per cent of the detonations have traveltimes indicative of stratospheric arrivals, while tropospheric waveguides are observed from only 27 per cent of the detonations. The second array, DNIAR, located 293 km southeast of the source exhibits strong seasonal variations with high stratospheric detection rates in winter and the virtual absence of stratospheric arrivals in summer. Tropospheric waveguides and thermospheric arrivals are also observed for DNIAR. Modeling through the Naval Research Laboratory Ground to Space atmospheric sound speeds leads to mixed results: FNIAR arrivals are usually not predicted to be present at all (either stratospheric or tropospheric), while DNIAR arrivals are usually correctly predicted, but summer arrivals show a consistent traveltime bias. In the end, we show the possible improvement in location using empirically calibrated traveltime and azimuth observations. Using the Bayesian Infrasound Source Localization we show that we can decrease the area enclosed by the 90 per cent credibility contours by a factor of 2.5.

Capacity Fading Mechanism of the Commercial 18650 LiFePO4-Based Lithium-Ion Batteries: An in Situ Time-Resolved High-Energy Synchrotron XRD Study.

PubMed

Liu, Qi; Liu, Yadong; Yang, Fan; He, Hao; Xiao, Xianghui; Ren, Yang; Lu, Wenquan; Stach, Eric; Xie, Jian

2018-02-07

In situ high-energy synchrotron XRD studies were carried out on commercial 18650 LiFePO 4 cells at different cycles to track and investigate the dynamic, chemical, and structural changes in the course of long-term cycling to elucidate the capacity fading mechanism. The results indicate that the crystalline structural deterioration of the LiFePO 4 cathode and the graphite anode is unlikely to happen before capacity fades below 80% of the initial capacity. Rather, the loss of the active lithium source is the primary cause for the capacity fade, which leads to the appearance of inactive FePO 4 that is proportional to the absence of the lithium source. Our in situ HESXRD studies further show that the lithium-ion insertion and deinsertion behavior of LiFePO 4 continuously changed with cycling. For a fresh cell, the LiFePO 4 experienced a dual-phase solid-solution behavior, whereas with increasing cycle numbers, the dynamic change, which is characteristic of the continuous decay of solid solution behavior, is obvious. The unpredicted dynamic change may result from the morphology evolution of LiFePO 4 particles and the loss of the lithium source, which may be the cause of the decreased rate capability of LiFePO 4 cells after long-term cycling.

The effect of nonlinear propagation on heating of tissue: A numerical model of diagnostic ultrasound beams

NASA Astrophysics Data System (ADS)

Cahill, Mark D.; Humphrey, Victor F.; Doody, Claire

2000-07-01

Thermal safety indices for diagnostic ultrasound beams are calculated under the assumption that the sound propagates under linear conditions. A non-axisymmetric finite difference model is used to solve the KZK equation, and so to model the beam of a diagnostic scanner in pulsed Doppler mode. Beams from both a uniform focused rectangular source and a linear array are considered. Calculations are performed in water, and in attenuating media with tissue-like characteristics. Attenuating media are found to exhibit significant nonlinear effects for finite-amplitude beams. The resulting loss of intensity by the beam is then used as the source term in a model of tissue heating to estimate the maximum temperature rises. These are compared with the thermal indices, derived from the properties of the water-propagated beams.

Comparison of debris flux models

NASA Astrophysics Data System (ADS)

Sdunnus, H.; Beltrami, P.; Klinkrad, H.; Matney, M.; Nazarenko, A.; Wegener, P.

The availability of models to estimate the impact risk from the man-made space debris and the natural meteoroid environment is essential for both, manned and unmanned satellite missions. Various independent tools based on different approaches have been developed in the past years. Due to an increased knowledge of the debris environment and its sources e.g. from improved measurement capabilities, these models could be updated regularly, providing more detailed and more reliable simulations. This paper addresses an in-depth, quantitative comparison of widely distributed debris flux models which were recently updated, namely ESA's MASTER 2001 model, NASA's ORDEM 2000 and the Russian SDPA 2000 model. The comparison was performed in the frame of the work of the 20t h Interagency Debris Coordination (IADC) meeting held in Surrey, UK. ORDEM 2000ORDEM 2000 uses careful empirical estimates of the orbit populations based onthree primary data sources - the US Space Command Catalog, the H ystackaRadar, and the Long Duration Exposure Facility spacecraft returned surfaces.Further data (e.g. HAX and Goldstone radars, impacts on Shuttle windows andradiators, and others) were used to adjust these populations for regions in time,size, and space not covered by the primary data sets. Some interpolation andextrapolation to regions with no data (such as projections into the future) wasprovided by the EVOLVE model. MASTER 2001The ESA MASTER model offers a full three dimensional description of theterrestrial debris distribution reaching from LEO up to the GEO region. Fluxresults relative to an orbiting target or to an inertial volume can be resolved intosource terms, impactor characteristics and orbit, as well as impact velocity anddirection. All relevant debris source terms are considered by the MASTERmodel. For each simulated source, a corresponding debris generation model interms of mass/diameter distribution, additional velocities, and directionalspreading has been developed. A comprehensive perturbation model was used topropagate all objects to a reference epoch. SDPA 2000The Russian Space Debris Prediction and Analysis (SDPA) model is the semi-analytical stochastic tool for medium- and long-term forecast of the man-madedebris environment (with size larger than 1 mm), for construction of spatialdensity and velocity distribution in LEO and GEO as well as for risk evaluation.The last version of SDPA 2000 consists of ten individual modules related to theaforementioned tasks. The total characteristics of space debris of the differentsizes are considered (without partition of these characteristics into specificsources). The current space debris environment is characterised a) by the spatialdensity dependence on the altitude and latitude of a point, as well as on size ofobjects and b) by a statistical distribution of the magnitude and direction of spaceobjects velocities in an inertial geocentric coordinate system. Thesecharacteristics are constructed on the basis of the complex application of theaccessible measuring information and series of a priori data. The comparison is performed by applying the models to a large number of target orbits specified by a grid in terms of impactor size (6 gridpoints), target orbit perigee altitude (16 gridpoints), and target orbit inclination (15 gridpoints). These result provide a characteristic diagram of integral fluxes for all models, which will be compared. Further to this, the models are applied to orbits of particular interest, namely the ISS orbit, and a sun-synchronous orbit. For these cases, the comparison will include the comparison of flux directionality and velocity. References 1. Liou, J.-C., M. J. Matney, P. D. Anz-Meador, D. Kessler, M. Jansen, and J. R.Theall, 2001, "The New NASA Orbital Debris Engineering ModelORDEM2000", NASA/TP-2002-210780. 2. P. Wegener, J. Bendisch, K.D. Bunte, H. Sdunnus; Upgrade of the ESAMASTER Model; Final Report of ESOC/TOS-GMA contract 12318/97/D/IM;May 2000 3. A.I. Nazarenko, I.L. Menchikov. Engineering Model of Space DebrisEnvironment. Third European Conference on Space Debris, Darmstadt,Germany, March 2001.

77 FR 19740 - Water Sources for Long-Term Recirculation Cooling Following a Loss-of-Coolant Accident

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-02

... NUCLEAR REGULATORY COMMISSION [NRC-2010-0249] Water Sources for Long-Term Recirculation Cooling... Regulatory Guide (RG) 1.82, ``Water Sources for Long-Term Recirculation Cooling Following a Loss-of-Coolant... regarding the sumps and suppression pools that provide water sources for emergency core cooling, containment...

Accreting, highly magnetized neutron stars at the Eddington limit: a study of the 2016 outburst of SMC X-3

NASA Astrophysics Data System (ADS)

Koliopanos, Filippos; Vasilopoulos, Georgios

2018-06-01

Aims: We study the temporal and spectral characteristics of SMC X-3 during its recent (2016) outburst to probe accretion onto highly magnetized neutron stars (NSs) at the Eddington limit. Methods: We obtained XMM-Newton observations of SMC X-3 and combined them with long-term observations by Swift. We performed a detailed analysis of the temporal and spectral behavior of the source, as well as its short- and long-term evolution. We have also constructed a simple toy-model (based on robust theoretical predictions) in order to gain insight into the complex emission pattern of SMC X-3. Results: We confirm the pulse period of the system that has been derived by previous works and note that the pulse has a complex three-peak shape. We find that the pulsed emission is dominated by hard photons, while at energies below 1 keV, the emission does not pulsate. We furthermore find that the shape of the pulse profile and the short- and long-term evolution of the source light-curve can be explained by invoking a combination of a "fan" and a "polar" beam. The results of our temporal study are supported by our spectroscopic analysis, which reveals a two-component emission, comprised of a hard power law and a soft thermal component. We find that the latter produces the bulk of the non-pulsating emission and is most likely the result of reprocessing the primary hard emission by optically thick material that partly obscures the central source. We also detect strong emission lines from highly ionized metals. The strength of the emission lines strongly depends on the phase. Conclusions: Our findings are in agreement with previous works. The energy and temporal evolution as well as the shape of the pulse profile and the long-term spectra evolution of the source are consistent with the expected emission pattern of the accretion column in the super-critical regime, while the large reprocessing region is consistent with the analysis of previously studied X-ray pulsars observed at high accretion rates. This reprocessing region is consistent with recently proposed theoretical and observational works that suggested that highly magnetized NSs occupy a considerable fraction of ultraluminous X-ray sources.

Depressive episode characteristics and subsequent recurrence risk.

PubMed

Patten, Scott B; Williams, Jeanne V A; Lavorato, Dina H; Bulloch, Andrew G M; MacQueen, Glenda

2012-11-01

Clinical practice guidelines increasingly recognize the heterogeneity associated with major depressive episodes (MDE), e.g. through strategies such as watchful waiting. However, the implications of episode heterogeneity for long-term prognosis have not been adequately explored. In this project, we used data from a Canadian longitudinal study to evaluate recurrence risks for MDE after an initial episode in the mid-1990s. This study collected data from a community cohort between 1994/1995 and 2008/2009 using biannual interviews. Characteristics of the index episode: syndromal versus sub-syndromal, duration of symptoms, and indicators of seriousness (activity restriction, high distress or suicidal ideation) were recorded. The ability of these variables to predict MDE recurrence was explored using proportional hazards modeling. Additional analyses using generalized estimating equations were used to assess robustness. Even brief, sub-syndromal episodes not characterized by indicators of seriousness were associated with an increased risk of subsequent MDE. However, episodes meeting diagnostic criteria for MDE, those lasting longer than four weeks and those associated with indicators of seriousness were associated with much higher recurrence risk. Sub-syndromal episodes associated with these characteristics generally predicted subsequent MDE as strongly as the occurrence of MDE itself. The data source did not include assessment of all potentially relevant covariates. The assessment of MDE used an abbreviated instrument. Brief sub-syndromal episodes of depression are not usually targets of acute treatment, but such episodes have implications for subsequent MDE risk. Episode characteristics identify a range of outcomes that have potential implications for long-term management. Copyright © 2012 Elsevier B.V. All rights reserved.

Internet as a Source of Long-Term and Real-Time Professional, Psychological, and Nutritional Treatment: A Qualitative Case Study Among Former Israeli Soviet Union Immigrants

PubMed Central

2017-01-01

Background The Internet is considered to be an effective source of health information and consultation for immigrants. Nutritional interventions for immigrants have become increasingly common over the past few decades. However, each population of immigrants has specific needs. Understanding the factors influencing the success of nutrition programs among immigrants requires an examination of their attitudes and perceptions, as well as their cultural values. Objective The purpose of this study was to examine perceptions of the Internet as a tool for long-term and “real-time” professional, psychological, and nutritional treatment for immigrants from the former Soviet Union who immigrated to Israel (IIFSU) from 1990 to 2012. Methods A sample of nutrition forum users (n=18) was interviewed and comments of 80 users were analyzed qualitatively in accordance with the grounded theory principles. Results The results show that IIFSU perceive the Internet as a platform for long-term and “real-time” dietary treatment and not just as an informative tool. IIFSU report benefits of online psychological support with professional dietary treatment. They attribute importance to cultural customization, which helps reduce barriers to intervention. Conclusions In light of the results, when formulating nutritional programs, it is essential to have a specific understanding of immigrants’ cultural characteristics and their patterns of Internet use concerning dietary care. PMID:28159729

Appearance-Based Inferences Bias Source Memory

PubMed Central

Cassidy, Brittany S.; Zebrowitz, Leslie A.; Gutchess, Angela H.

2012-01-01

Previous research varying the trustworthiness of appearance has demonstrated that facial characteristics contribute to source memory. Two studies extended this work by investigating the contribution to source memory of babyfaceness, a facial quality known to elicit strong spontaneous trait inferences. Young adult participants viewed younger and older babyfaced and mature-faced individuals paired with sentences that were either congruent or incongruent with the target's facial characteristics. Identifying a source as dominant or submissive was least accurate when participants chose between a target whose behavior was incongruent with facial characteristics and a lure whose face mismatched the target in appearance, but matched the source memory question. In Study 1, this effect held true when identifying older sources, but not own-age, younger sources. When task difficulty was increased in Study 2, the relationship between face-behavior congruence and lure facial characteristics persisted, but it was not moderated by target age even though participants continued to correctly identify fewer older than younger sources. Taken together, these results indicate that trait expectations associated with variations in facial maturity can bias source memory for both own- and other-age faces, although own-age faces are less vulnerable to this bias, as shown in the moderation by task difficulty. PMID:22806429

Effect of long-term forest fertilization on Scots pine xylem quality and wood borer performance.

PubMed

Heijari, Juha; Nerg, Anne-Marja; Kainulainen, Pirjo; Noldt, Uwe; Levula, Teuvo; Raitio, Hannu; Holopainen, Jarmo K

2008-01-01

We tested whether changes in long-term nutrient availability would affect the xylem quality and characteristics of Scots pine trees as a food source for the larvae of the xylophagous wood borer Hylotrupes bajulus L. (Cerambycidae). We looked for an effect of host plant growth and xylem structural traits on H. bajulus larval performance, and looked for delayed effects of long-term forest fertilization on xylem chemical quality. In general, larval performance was dependent on larval developmental stage. However, the growth of larvae also varied with host plant quality (increases in the concentration of nitrogen and carbon-based secondary compounds of xylem were correlated with a decrease in the larval growth rate). The greater annual growth of trees reduced tracheid length and correlated positively with second-instar H. bajulus growth rate. This is consistent with the hypothesis that intrinsic growth patterns of host plants influence the development of the xylophagous wood borer H. bajulus.

Gas Turbine Energy Conversion Systems for Nuclear Power Plants Applicable to LiFTR Liquid Fluoride Thorium Reactor Technology

NASA Technical Reports Server (NTRS)

Juhasz, Albert J.

2014-01-01

This panel plans to cover thermal energy and electric power production issues facing our nation and the world over the next decades, with relevant technologies ranging from near term to mid-and far term.Although the main focus will be on ground based plants to provide baseload electric power, energy conversion systems (ECS) for space are also included, with solar- or nuclear energy sources for output power levels ranging tens of Watts to kilo-Watts for unmanned spacecraft, and eventual mega-Watts for lunar outposts and planetary surface colonies. Implications of these technologies on future terrestrial energy systems, combined with advanced fracking, are touched upon.Thorium based reactors, and nuclear fusion along with suitable gas turbine energy conversion systems (ECS) will also be considered by the panelists. The characteristics of the above mentioned ECS will be described, both in terms of their overall energy utilization effectiveness and also with regard to climactic effects due to exhaust emissions.

Psychoacoustics

NASA Astrophysics Data System (ADS)

Moore, Brian C. J.

Psychoacoustics psychological is concerned with the relationships between the physical characteristics of sounds and their perceptual attributes. This chapter describes: the absolute sensitivity of the auditory system for detecting weak sounds and how that sensitivity varies with frequency; the frequency selectivity of the auditory system (the ability to resolve or hear out the sinusoidal components in a complex sound) and its characterization in terms of an array of auditory filters; the processes that influence the masking of one sound by another; the range of sound levels that can be processed by the auditory system; the perception and modeling of loudness; level discrimination; the temporal resolution of the auditory system (the ability to detect changes over time); the perception and modeling of pitch for pure and complex tones; the perception of timbre for steady and time-varying sounds; the perception of space and sound localization; and the mechanisms underlying auditory scene analysis that allow the construction of percepts corresponding to individual sounds sources when listening to complex mixtures of sounds.

The long-term performance degradation of a radioisotope thermoelectric generator using silicon germanium

NASA Technical Reports Server (NTRS)

Stapfer, G.; Truscello, V. C.

1976-01-01

The successful utilization of a radioisotope thermoelectric generator (RTG) as the power source for spaceflight missions requires that the performance of such an RTG be predictable throughout the mission. Several mechanisms occur within the generator which tend to degrade the performance as a function of operating time. The impact which these mechanisms have on the available output power of an RTG depends primarily on such factors as time, temperature and self-limiting effects. The relative magnitudes, rates and temperature dependency of these various degradation mechanisms have been investigated separately by coupon experiments as well as 4-couple and 18-couple module experiments. This paper discusses the different individual mechanisms and summarizes their combined influence on the performance of an RTG. Also presented as part of the RTG long-term performance characteristics is the sensitivity of the available RTG output power to variations of the individual degradation mechanisms thus identifying the areas of greatest concern for a successful long-term mission.

Multidecadal changes in winter circulation-climate relationship in Europe: frequency variations, within-type modifications, and long-term trends

NASA Astrophysics Data System (ADS)

Küttel, Marcel; Luterbacher, Jürg; Wanner, Heinz

2011-03-01

Using pressure fields classified by the SANDRA algorithm, this study investigates the changes in the relationship between North Atlantic/European sea level pressure (SLP) and gridded European winter (DJF) temperature and precipitation back to 1750. Important changes in the frequency of the SLP clusters are found, though none of them indicating significant long-term trends. However, for the majority of the SLP clusters a tendency toward overall warmer and partly wetter winter conditions is found, most pronounced over the last decades. This suggests important within-type variations, i.e. the temperature and precipitation fields related to a particular SLP pattern change their characteristics over time. Using a decomposition scheme we find for temperature and precipitation that within-type-related variations dominate over those due to changed frequencies of the SLP clusters: Approximately 70% (60%) of European winter temperature (precipitation) variations can be explained by within-type changes, most strongly expressed over Eastern Europe and Scandinavia. This indicates that the current European winter warming cannot be explained by changed frequencies of the SLP patterns alone, but to a larger degree by changed characteristics of the patterns themselves. Potential sources of within-type variations are discussed.

Are all quantitative postmarketing signal detection methods equal? Performance characteristics of logistic regression and Multi-item Gamma Poisson Shrinker.

PubMed

Berlin, Conny; Blanch, Carles; Lewis, David J; Maladorno, Dionigi D; Michel, Christiane; Petrin, Michael; Sarp, Severine; Close, Philippe

2012-06-01

The detection of safety signals with medicines is an essential activity to protect public health. Despite widespread acceptance, it is unclear whether recently applied statistical algorithms provide enhanced performance characteristics when compared with traditional systems. Novartis has adopted a novel system for automated signal detection on the basis of disproportionality methods within a safety data mining application (Empirica™ Signal System [ESS]). ESS uses two algorithms for routine analyses: empirical Bayes Multi-item Gamma Poisson Shrinker and logistic regression (LR). A model was developed comprising 14 medicines, categorized as "new" or "established." A standard was prepared on the basis of safety findings selected from traditional sources. ESS results were compared with the standard to calculate the positive predictive value (PPV), specificity, and sensitivity. PPVs of the lower one-sided 5% and 0.05% confidence limits of the Bayes geometric mean (EB05) and of the LR odds ratio (LR0005) almost coincided for all the drug-event combinations studied. There was no obvious difference comparing the PPV of the leading Medical Dictionary for Regulatory Activities (MedDRA) terms to the PPV for all terms. The PPV of narrow MedDRA query searches was higher than that for broad searches. The widely used threshold value of EB05 = 2.0 or LR0005 = 2.0 together with more than three spontaneous reports of the drug-event combination produced balanced results for PPV, sensitivity, and specificity. Consequently, performance characteristics were best for leading terms with narrow MedDRA query searches irrespective of applying Multi-item Gamma Poisson Shrinker or LR at a threshold value of 2.0. This research formed the basis for the configuration of ESS for signal detection at Novartis. Copyright © 2011 John Wiley & Sons, Ltd.

Characteristics of Interruptions During Medication Administration:An Integrative Review of Direct Observational Studies.

PubMed

Schroers, Ginger

2018-06-26

The purpose of this review was to synthesize and summarize data gathered by direct observation of the characteristics of interruptions in the context of nursing medication administration in hospital settings. Interruptions are prevalent during the medication administration process performed by nurses in hospital settings and have been found to be associated with an increase in frequency and severity of nursing medication administration errors. In addition, interruptions decrease task efficiency, leading to longer medication administration completion times. Integrative review. The electronic databases Cumulative Index of Nursing and Allied Health Literature (CINAHL), PubMED, PsyARTICLES, and Google Scholar were searched using the terms "interruptions" AND "medication administration" AND "direct observation". Nine articles met the inclusion criteria. Interruptions are likely to occur at least once during nursing medication administration processes in hospital settings. This finding applies to medication administered to one patient, termed a medication pass, and medication administered to multiple patients, termed a mediation round. Interruptions are most commonly caused by another nurse, staff member, or are self-initiated, and last approximately one minute in length. A raised awareness among staff of the most common sources of interruptions may encourage changes that lead to a decrease in the occurrence of interruptions. In addition, nurse leaders can apply an understanding of the common characteristics of interruptions to guide research, policies, and educational methods aimed at interruption management strategies. The findings from this review can be used to guide the identification and development of targeted interventions and strategies that would have the most substantial impact to reduce and manage interruptions during medication administration. Interruption management strategies have the potential to lead to a decrease in medication errors and an increase in task efficiency. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Ecosystem variability in the offshore northeastern Chukchi Sea

NASA Astrophysics Data System (ADS)

Blanchard, Arny L.; Day, Robert H.; Gall, Adrian E.; Aerts, Lisanne A. M.; Delarue, Julien; Dobbins, Elizabeth L.; Hopcroft, Russell R.; Questel, Jennifer M.; Weingartner, Thomas J.; Wisdom, Sheyna S.

2017-12-01

Understanding influences of cumulative effects from multiple stressors in marine ecosystems requires an understanding of the sources for and scales of variability. A multidisciplinary ecosystem study in the offshore northeastern Chukchi Sea during 2008-2013 investigated the variability of the study area's two adjacent sub-ecosystems: a pelagic system influenced by interannual and/or seasonal temporal variation at large, oceanographic (regional) scales, and a benthic-associated system more influenced by small-scale spatial variations. Variability in zooplankton communities reflected interannual oceanographic differences in waters advected northward from the Bering Sea, whereas variation in benthic communities was associated with seafloor and bottom-water characteristics. Variations in the planktivorous seabird community were correlated with prey distributions, whereas interaction effects in ANOVA for walruses were related to declines of sea-ice. Long-term shifts in seabird distributions were also related to changes in sea-ice distributions that led to more open water. Although characteristics of the lower trophic-level animals within sub-ecosystems result from oceanographic variations and interactions with seafloor topography, distributions of apex predators were related to sea-ice as a feeding platform (walruses) or to its absence (i.e., open water) for feeding (seabirds). The stability of prey resources appears to be a key factor in mediating predator interactions with other ocean characteristics. Seabirds reliant on highly-variable zooplankton prey show long-term changes as open water increases, whereas walruses taking benthic prey in biomass hotspots respond to sea-ice changes in the short-term. A better understanding of how variability scales up from prey to predators and how prey resource stability (including how critical prey respond to environmental changes over space and time) might be altered by climate and anthropogenic stressors is essential to predicting the future state of both the Chukchi and other arctic systems.

A flowing atmospheric pressure afterglow as an ion source coupled to a differential mobility analyzer for volatile organic compound detection.

PubMed

Bouza, Marcos; Orejas, Jaime; López-Vidal, Silvia; Pisonero, Jorge; Bordel, Nerea; Pereiro, Rosario; Sanz-Medel, Alfredo

2016-05-23

Atmospheric pressure glow discharges have been widely used in the last decade as ion sources in ambient mass spectrometry analyses. Here, an in-house flowing atmospheric pressure afterglow (FAPA) has been developed as an alternative ion source for differential mobility analysis (DMA). The discharge source parameters (inter-electrode distance, current and helium flow rate) determining the atmospheric plasma characteristics have been optimized in terms of DMA spectral simplicity with the highest achievable sensitivity while keeping an adequate plasma stability and so the FAPA working conditions finally selected were: 35 mA, 1 L min(-1) of He and an inter-electrode distance of 8 mm. Room temperature in the DMA proved to be adequate for the coupling and chemical analysis with the FAPA source. Positive and negative ions for different volatile organic compounds were tested and analysed by FAPA-DMA using a Faraday cup as a detector and proper operation in both modes was possible (without changes in FAPA operational parameters). The FAPA ionization source showed simpler ion mobility spectra with narrower peaks and a better, or similar, sensitivity than conventional UV-photoionization for DMA analysis in positive mode. Particularly, the negative mode proved to be a promising field of further research for the FAPA ion source coupled to ion mobility, clearly competitive with other more conventional plasmas such as corona discharge.

Nonpoint Source Monitoring

EPA Pesticide Factsheets

Water quality monitoring for nonpoint sources of pollution includes the important element of relating the physical, chemical, and biological characteristics of receiving waters to land use characteristics.

Antibiotic Use and Need for Antimicrobial Stewardship in Long-Term Care.

PubMed

Wu, Lisa Dong-Ying; Walker, Sandra A N; Elligsen, Marion; Palmay, Lesley; Simor, Andrew; Daneman, Nick

2015-01-01

Antimicrobial stewardship may be important in long-term care facilities because of unnecessary or inappropriate antibiotic use observed in these residents, coupled with their increased vulnerability to health care-associated infections. To assess antibiotic use in a long-term care facility in order to identify potential antimicrobial stewardship needs. A retrospective descriptive study was conducted at the Veterans Centre, a long-term care facility at Sunnybrook Health Sciences Centre, Toronto, Ontario. All residents taking one or more antibiotics (n = 326) were included as participants. Antibiotic-use data for patients residing in the facility between April 1, 2011, and March 31, 2012, were collected and analyzed. Totals of 358 patient encounters, 835 antibiotic prescriptions, and 193 positive culture results were documented during the study period. For 36% (302/835) of antibiotic prescriptions, the duration was more than 7 days. Cephalosporins (30%; 251/835) and fluoroquinolones (28%; 235/835) were the most frequently prescribed antibiotic classes. Urine was the most common source of samples for culture (60%; 116/193). Characteristics of antimicrobial use at this long-term care facility that might benefit from further evaluation included potentially excessive use of fluoroquinolones and cephalosporins and potentially excessive duration of antibiotic use for individual patients.

Novel techniques for characterization of hydrocarbon emission sources in the Barnett Shale

NASA Astrophysics Data System (ADS)

Nathan, Brian Joseph

Changes in ambient atmospheric hydrocarbon concentrations can have both short-term and long-term effects on the atmosphere and on human health. Thus, accurate characterization of emissions sources is critically important. The recent boom in shale gas production has led to an increase in hydrocarbon emissions from associated processes, though the exact extent is uncertain. As an original quantification technique, a model airplane equipped with a specially-designed, open-path methane sensor was flown multiple times over a natural gas compressor station in the Barnett Shale in October 2013. A linear optimization was introduced to a standard Gaussian plume model in an effort to determine the most probable emission rate coming from the station. This is shown to be a suitable approach given an ideal source with a single, central plume. Separately, an analysis was performed to characterize the nonmethane hydrocarbons in the Barnett during the same period. Starting with ambient hourly concentration measurements of forty-six hydrocarbon species, Lagrangian air parcel trajectories were implemented in a meteorological model to extend the resolution of these measurements and achieve domain-fillings of the region for the period of interest. A self-organizing map (a type of unsupervised classification) was then utilized to reduce the dimensionality of the total multivariate set of grids into characteristic one-dimensional signatures. By also introducing a self-organizing map classification of the contemporary wind measurements, the spatial hydrocarbon characterizations are analyzed for periods with similar wind conditions. The accuracy of the classification is verified through assessment of observed spatial mixing ratio enhancements of key species, through site-comparisons with a related long-term study, and through a random forest analysis (an ensemble learning method of supervised classification) to determine the most important species for defining key classes. The hydrocarbon classification is shown to have performed very well in identifying expected signatures near and downwind-of oil and gas facilities with active permits, which showcases this method's usefulness for future regional hydrocarbon source-apportionment analyses.

Turbidite carbon distribution by Ramped PyrOx, Astoria Canyon

NASA Astrophysics Data System (ADS)

Childress, L. B.; Galy, V.; McNichol, A. P.

2017-12-01

The magnitude and nature of carbon preserved in marine sediments can be affected by long-term processes such as climate change and tectonic transport; preservation of carbon can also be affected by short-term, episodic disturbances such as storm events, landslides, and earthquakes. In margins with active canyons, these systems can be efficient burial networks for carbon. The downslope displacement and reorganization of sediment and associated organic carbon (OC) during turbidite formation alters oxygen diffusion and the potential for aerobic oxidation, thereby modifying the redox geochemistry of the sediment package. Generally termed as a `burn-down', reactions at the subsurface oxidation front are linked to a loss of OC preservation within turbidite sequences. Still debated is the source of the OC residual within `burn-down' events, primarily whether the preserved material is dominated by terrestrial or marine components. To better understand the significance of canyon systems and turbidite deposits in the transport, preservation, and `burn-down' of organic carbon, samples from these systems can be studied using the Ramped PyrOx (RPO) technique. Whereas bulk radiocarbon measurements are unsuitable within turbidite deposits, RPO is well suited for characterizing the distribution of carbon sources within a turbidite interval. To complement RPO analyses, OC and N content, stable carbon isotope composition, gamma ray attenuation bulk density, computerized tomography, and magnetic susceptibility were determined. The turbidite systems of the Cascadia Subduction Zone have been extensively studied in relation to the Holocene paleoseismic record. Gravity cores collected in 2011 aboard the R/V Wecoma capture turbidite deposits in Astoria Canyon and demonstrate characteristics of `burn down' intervals. RPO data from within a 15 cm turbidite interval indicate minimal variation in reactivity structure, stable carbon isotope values and radiocarbon age, suggesting a shared source of sediment input. Such similarities imply minimal source-selective OC alteration and are consistent with a singular event (e.g. - flood) associated with late Holocene warm interval influence on the Columbia River Basin.

Recycling wastewater after hemodialysis: an environmental analysis for alternative water sources in arid regions.

PubMed

Tarrass, Faissal; Benjelloun, Meryem; Benjelloun, Omar

2008-07-01

Water is a vital aspect of hemodialysis. During the procedure, large volumes of water are used to prepare dialysate and clean and reprocess machines. This report evaluates the technical and economic feasibility of recycling hemodialysis wastewater for irrigation uses, such as watering gardens and landscape plantings. Water characteristics, possible recycling methods, and production costs of treated water are discussed in terms of the quality of the generated wastewater. A cost-benefit analysis is also performed through comparison of intended cost with that of seawater desalination, which is widely used in irrigation.

Perception and Selection of Information Sources by Undergraduate Students: Effects of Avoidant Style, Confidence, and Personal Control in Problem-Solving

ERIC Educational Resources Information Center

Kim, Kyung-Sun; Sin, Sei-Ching Joanna

2007-01-01

A survey of undergraduate students examined how students' beliefs about their problem-solving styles and abilities (including avoidant style, confidence, and personal control in problem-solving) influenced their perception and selection of sources, as reflected in (1) perceived characteristics of sources, (2) source characteristics considered…

Modernization and new technologies: Coping with the information explosion

NASA Technical Reports Server (NTRS)

Blados, Walter R.; Cotter, Gladys A.

1993-01-01

Information has become a valuable and strategic resource in all societies and economies. Scientific and technical information is especially important in developing and maintaining a strong national science and technology base. The expanding use of information technology, the growth of interdisciplinary research, and an increase in international collaboration are changing characteristics of information. This modernization effort applies new technology to current processes to provide near-term benefits to the user. At the same time, we are developing a long-term modernization strategy designed to transition the program to a multimedia, global 'library without walls'. Notwithstanding this modernization program, it is recogized that no one information center can hope to collect all the relevant data. We see information and information systems changing and becoming more international in scope. We are finding that many nations are expending resources on national systems which duplicate each other. At the same time that this duplication exists, many useful sources of aerospace information are not being collected to cover expanded sources of information. This paper reviews the NASA modernization program and raises for consideration new possibilities for unification of the various aerospace database efforts toward a cooperative international aerospace database initiative, one that can optimize the cost/benefit equation for all participants.

Radiological analysis of plutonium glass batches with natural/enriched boron

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rainisch, R.

2000-06-22

The disposition of surplus plutonium inventories by the US Department of Energy (DOE) includes the immobilization of certain plutonium materials in a borosilicate glass matrix, also referred to as vitrification. This paper addresses source terms of plutonium masses immobilized in a borosilicate glass matrix where the glass components include both natural boron and enriched boron. The calculated source terms pertain to neutron and gamma source strength (particles per second), and source spectrum changes. The calculated source terms corresponding to natural boron and enriched boron are compared to determine the benefits (decrease in radiation source terms) for to the use ofmore » enriched boron. The analysis of plutonium glass source terms shows that a large component of the neutron source terms is due to (a, n) reactions. The Americium-241 and plutonium present in the glass emit alpha particles (a). These alpha particles interact with low-Z nuclides like B-11, B-10, and O-17 in the glass to produce neutrons. The low-Z nuclides are referred to as target particles. The reference glass contains 9.4 wt percent B{sub 2}O{sub 3}. Boron-11 was found to strongly support the (a, n) reactions in the glass matrix. B-11 has a natural abundance of over 80 percent. The (a, n) reaction rates for B-10 are lower than for B-11 and the analysis shows that the plutonium glass neutron source terms can be reduced by artificially enriching natural boron with B-10. The natural abundance of B-10 is 19.9 percent. Boron enriched to 96-wt percent B-10 or above can be obtained commercially. Since lower source terms imply lower dose rates to radiation workers handling the plutonium glass materials, it is important to know the achievable decrease in source terms as a result of boron enrichment. Plutonium materials are normally handled in glove boxes with shielded glass windows and the work entails both extremity and whole-body exposures. Lowering the source terms of the plutonium batches will make the handling of these materials less difficult and will reduce radiation exposure to operating workers.« less

Atmospheric toxic metals emission inventory and spatial characteristics from anthropogenic sources of Guangdong province, China

NASA Astrophysics Data System (ADS)

Cher, S.; Menghua, L.; Xiao, X.; Yuqi, W.; Zhuangmin, Z.; Zhijiong, H.; Cheng, L.; Guanglin, J.; Zibing, Y.; Junyu, Z.

2017-12-01

Atmospheric toxic metals (TMs) are part of particulate matters, and may create adverse effects on the environment and human health depending upon their bioavailability and toxicity. Localized emission inventory is fundamental for parsing of toxic metals to identify key sources in order to formulate efficient toxic metals control strategies. With the use of the latest municipal level environment statistical data, this study developed a bottom-up emission inventory of five toxic metals (Hg, As, Pb, Cd, Cr) from anthropogenic activities in Guangdong province for the year of 2014. Major atmospheric toxic metals sources including combustion sources (coal, oil, biomass, municipal solid waste) and industrial process sources (cement production, nonferrous metal smelting, iron and steel industry, battery and fluorescent lamp production) were investigated. Results showed that: (1) The total emissions of Hg, As, Pb, Cd, Cr in Guangdong province were 18.14, 32.59, 411.34, 13.13, 84.16 t, respectively. (2) Different pollutants have obvious characteristics of emission sources. For total Hg emission, 46% comes from combustion sources, of which 32% from coal combustion and 8% from MSW combustion. Other 54% comes from industrial processes, which dominated by the cement (19%), fluorescent lamp (18%) and battery production (13%). Of the total Hg emission, 69% is released as Hg0 , 29% as Hg2+ , and only 2% as Hgp due to strict particulate matters controls policies. For As emissions, coal combustion, nonferrous metal smelting and iron and steel industry contributed approximate 48%, 25% and 24%, respectively. Pb emissions primarily come from battery production (42%), iron and steel industry (21%) and on-road mobile gasoline combustion (17%). Cd and Cr emissions were dominated by nonferrous metal smelting (71%) and iron and steel industry (82%), respectively. (3) In term of the spatial distribution, emissions of atmospheric toxic metals are mainly concentrated in the central region of the Pearl River Delta, such as, Guangzhou, Dongguan, and Foshan et.al. These areas were characterized with large amounts of coal combustion, battery production and fluorescent production. With the implementation of ultra-low emission standards in coal-fired power plant, TMs emissions from industrial process sources should be emphasized.

Fission Product Appearance Rate Coefficients in Design Basis Source Term Determinations - Past and Present

NASA Astrophysics Data System (ADS)

Perez, Pedro B.; Hamawi, John N.

2017-09-01

Nuclear power plant radiation protection design features are based on radionuclide source terms derived from conservative assumptions that envelope expected operating experience. Two parameters that significantly affect the radionuclide concentrations in the source term are failed fuel fraction and effective fission product appearance rate coefficients. Failed fuel fraction may be a regulatory based assumption such as in the U.S. Appearance rate coefficients are not specified in regulatory requirements, but have been referenced to experimental data that is over 50 years old. No doubt the source terms are conservative as demonstrated by operating experience that has included failed fuel, but it may be too conservative leading to over-designed shielding for normal operations as an example. Design basis source term methodologies for normal operations had not advanced until EPRI published in 2015 an updated ANSI/ANS 18.1 source term basis document. Our paper revisits the fission product appearance rate coefficients as applied in the derivation source terms following the original U.S. NRC NUREG-0017 methodology. New coefficients have been calculated based on recent EPRI results which demonstrate the conservatism in nuclear power plant shielding design.

44 CFR 72.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... or hydraulic characteristics of a flooding source and thus result in the modification of the existing... hydrologic or hydraulic characteristics of a flooding source and thus result in the modification of the... generally based on physical measures that affect the hydrologic or hydraulic characteristics of a flooding...

44 CFR 72.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... or hydraulic characteristics of a flooding source and thus result in the modification of the existing... hydrologic or hydraulic characteristics of a flooding source and thus result in the modification of the... generally based on physical measures that affect the hydrologic or hydraulic characteristics of a flooding...

44 CFR 72.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... or hydraulic characteristics of a flooding source and thus result in the modification of the existing... hydrologic or hydraulic characteristics of a flooding source and thus result in the modification of the... generally based on physical measures that affect the hydrologic or hydraulic characteristics of a flooding...

44 CFR 72.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... or hydraulic characteristics of a flooding source and thus result in the modification of the existing... hydrologic or hydraulic characteristics of a flooding source and thus result in the modification of the... generally based on physical measures that affect the hydrologic or hydraulic characteristics of a flooding...

44 CFR 72.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... or hydraulic characteristics of a flooding source and thus result in the modification of the existing... hydrologic or hydraulic characteristics of a flooding source and thus result in the modification of the... generally based on physical measures that affect the hydrologic or hydraulic characteristics of a flooding...

Finite Moment Tensors of Southern California Earthquakes

NASA Astrophysics Data System (ADS)

Jordan, T. H.; Chen, P.; Zhao, L.

2003-12-01

We have developed procedures for inverting broadband waveforms for the finite moment tensors (FMTs) of regional earthquakes. The FMT is defined in terms of second-order polynomial moments of the source space-time function and provides the lowest order representation of a finite fault rupture; it removes the fault-plane ambiguity of the centroid moment tensor (CMT) and yields several additional parameters of seismological interest: the characteristic length L{c}, width W{c}, and duration T{c} of the faulting, as well as the directivity vector {v}{d} of the fault slip. To formulate the inverse problem, we follow and extend the methods of McGuire et al. [2001, 2002], who have successfully recovered the second-order moments of large earthquakes using low-frequency teleseismic data. We express the Fourier spectra of a synthetic point-source waveform in its exponential (Rytov) form and represent the observed waveform relative to the synthetic in terms two frequency-dependent differential times, a phase delay δ τ {p}(ω ) and an amplitude-reduction time δ τ {q}(ω ), which we measure using Gee and Jordan's [1992] isolation-filter technique. We numerically calculate the FMT partial derivatives in terms of second-order spatiotemporal gradients, which allows us to use 3D finite-difference seismograms as our isolation filters. We have applied our methodology to a set of small to medium-sized earthquakes in Southern California. The errors in anelastic structure introduced perturbations larger than the signal level caused by finite source effect. We have therefore employed a joint inversion technique that recovers the CMT parameters of the aftershocks, as well as the CMT and FMT parameters of the mainshock, under the assumption that the source finiteness of the aftershocks can be ignored. The joint system of equations relating the δ τ {p} and δ τ {q} data to the source parameters of the mainshock-aftershock cluster is denuisanced for path anomalies in both observables; this projection operation effectively corrects the mainshock data for path-related amplitude anomalies in a way similar to, but more flexible than, empirical Green function (EGF) techniques.

Microwave plasma source for neutral-beam injection systems

NASA Astrophysics Data System (ADS)

1981-08-01

The overall program is described and the technical and programmatic reasons for the decision to pursue both the RFI and ECH sources into the current hydrogen test stage is discussed. The general characteristics of plasma sources in the parameter regime of interest for neutral beam applications are considered. The operational characteristics, advantages and potential problems of RFI and ECH sources are discussed.

Characteristics of Arabic Websites with information on autism

PubMed Central

Alnemary, Fahad M.; Alnemary, Faisal M.; Alamri, Abdulrahman S.; Alamri, Yassar A.

2017-01-01

Objectives: To explore the characteristics of Arabic websites with information on autism spectrum disorder (ASD). Methods: The word autism in Arabic was entered into 2 popular search engines in September 2013 to locate the top 80 websites featuring the term. Websites were sorted using 10 characteristics, previously used to evaluate the characteristics of English websites with information on ASD. Results: Most websites were registered using a.com top-level domain (69%), were an individual’s site, forum, or blog (44%), and were updated after September 2012 (60%); they contained images or texts that seemed to persuade viewers to purchase products (43%); they provided information with the name of author(s) (64%); they described the basic characteristics of ASD; and they promoted various types of treatments, most of which lack empirical support (63%). However, few websites contained information with references to peer review resources (3%) or a warning statement that such information should not replace the opinion of a qualified professional (8%). Conclusion: Internet users may not find Arabic websites to be reliable sources to obtain information on ASD. Given the increased use of the internet, creation of websites that contain trusted information on ASD could potentially aid parents in accessing available services, help them learn about empirically validated interventions, and enable them to advocate for their children’s rights. PMID:28416788

Characteristics of Arabic Websites with information on autism.

PubMed

Alnemary, Fahad M; Alnemary, Faisal M; Alamri, Abdulrahman S; Alamri, Yassar A

2017-04-01

To explore the characteristics of Arabic websites with information on autism spectrum disorder (ASD). The word autism in Arabic was entered into 2 popular search engines in September 2013 to locate the top 80 websites featuring the term. Websites were sorted using 10 characteristics, previously used to evaluate the characteristics of English websites with information on ASD. Most websites were registered using a .com top-level domain (69%), were an individual`s site, forum, or blog (44%), and were updated after September 2012 (60%); they contained images or texts that seemed to persuade viewers to purchase products (43%); they provided information with the name of author(s) (64%); they described the basic characteristics of ASD; and they promoted various types of treatments, most of which lack empirical support (63%). However, few websites contained information with references to peer review resources (3%) or a warning statement that such information should not replace the opinion of a qualified professional (8%). Internet users may not find Arabic websites to be reliable sources to obtain information on ASD. Given the increased use of the internet, creation of websites that contain trusted information on ASD could potentially aid parents in accessing available services, help them learn about empirically validated interventions, and enable them to advocate for their children`s rights.

26 CFR 1.737-3 - Basis adjustments; Recovery rules.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Properties A1, A2, and A3 is long-term, U.S.-source capital gain or loss. The character of gain on Property A4 is long-term, foreign-source capital gain. B contributes Property B, nondepreciable real property...-term, foreign-source capital gain ($3,000 total gain under section 737 × $2,000 net long-term, foreign...

26 CFR 1.737-3 - Basis adjustments; Recovery rules.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Properties A1, A2, and A3 is long-term, U.S.-source capital gain or loss. The character of gain on Property A4 is long-term, foreign-source capital gain. B contributes Property B, nondepreciable real property...-term, foreign-source capital gain ($3,000 total gain under section 737 × $2,000 net long-term, foreign...

26 CFR 1.737-3 - Basis adjustments; Recovery rules.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Properties A1, A2, and A3 is long-term, U.S.-source capital gain or loss. The character of gain on Property A4 is long-term, foreign-source capital gain. B contributes Property B, nondepreciable real property...-term, foreign-source capital gain ($3,000 total gain under section 737 × $2,000 net long-term, foreign...

26 CFR 1.737-3 - Basis adjustments; Recovery rules.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Properties A1, A2, and A3 is long-term, U.S.-source capital gain or loss. The character of gain on Property A4 is long-term, foreign-source capital gain. B contributes Property B, nondepreciable real property...-term, foreign-source capital gain ($3,000 total gain under section 737 × $2,000 net long-term, foreign...

26 CFR 1.737-3 - Basis adjustments; Recovery rules.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Properties A1, A2, and A3 is long-term, U.S.-source capital gain or loss. The character of gain on Property A4 is long-term, foreign-source capital gain. B contributes Property B, nondepreciable real property...-term, foreign-source capital gain ($3,000 total gain under section 737 × $2,000 net long-term, foreign...

The vertical distribution of tropospheric ammonia

NASA Technical Reports Server (NTRS)

Levine, J. S.; Hoell, J. M.; Augustsson, T. R.

1980-01-01

A one-dimensional tropospheric photochemical model is used to simulate measured profiles of NH3 obtained with the Infrared Heterodyne Radiometer. The relative roles of homogeneous loss, heterogeneous loss, and vertical eddy transport are discussed in terms of selecting parameters which best fit the measurements. The best fit was obtained for a vertical eddy diffusion coefficient of 200,000/sq cm per sec or greater (corresponding to a characteristic vertical transport time in excess of about 35 days), and a characteristic heterogeneous loss time in excess of 10 days. The characteristic homogeneous chemical loss time was found to be about 40 days at the surface and decreased to about 180 days at 10 km, and not very sensitive to model chemical perturbations. Increased ground-level concentrations of NH3 to about 10 ppb, compared to background surface concentrations of about 1 ppb, were measured several weeks after application of ammonium nitrate fertilizer. This suggests that the volatilization of ammonium nitrate fertilizer is rapid, and an important source of NH3. Because of the characteristic times for the loss mechanisms, synoptic time-scale phenomena may play an important role in determining the tropospheric distribution of NH3 concentrations.

A time-dependent neutron transport method of characteristics formulation with time derivative propagation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoffman, Adam J., E-mail: adamhoff@umich.edu; Lee, John C., E-mail: jcl@umich.edu

2016-02-15

A new time-dependent Method of Characteristics (MOC) formulation for nuclear reactor kinetics was developed utilizing angular flux time-derivative propagation. This method avoids the requirement of storing the angular flux at previous points in time to represent a discretized time derivative; instead, an equation for the angular flux time derivative along 1D spatial characteristics is derived and solved concurrently with the 1D transport characteristic equation. This approach allows the angular flux time derivative to be recast principally in terms of the neutron source time derivatives, which are approximated to high-order accuracy using the backward differentiation formula (BDF). This approach, called Sourcemore » Derivative Propagation (SDP), drastically reduces the memory requirements of time-dependent MOC relative to methods that require storing the angular flux. An SDP method was developed for 2D and 3D applications and implemented in the computer code DeCART in 2D. DeCART was used to model two reactor transient benchmarks: a modified TWIGL problem and a C5G7 transient. The SDP method accurately and efficiently replicated the solution of the conventional time-dependent MOC method using two orders of magnitude less memory.« less

Evaluation of the feed value for ruminants of blends of corn and wheat distillers dried grains.

PubMed

Damiran, Daalkhaijav; Jonker, Arjan; Zhang, Xuewei; Yari, Mojtaba; McKinnon, John J; McAllister, Tim; Abeysekara, Saman; Yu, Peiqiang

2013-05-08

Recently, biofuel processing has produced a large amount of biofuel coproducts. However, to date, there is little information on the metabolic characteristics of proteins and energy in biofuel coproduct-based rations. The objective of this study was to study the metabolic characteristics of proteins and energy in biofuel coproduct-based rations in terms of (1) chemical and nutrient profiles, (2) protein and carbohydrate subfraction associated with various degradation rate, (3) rumen and intestinal degradation and digestion kinetics, and (4) metabolic characteristics of proteins. Two sources of grain corn were mixed with two sources of biofuel coproducts (wheat-based dried distillers grains with solubles, wDDGS) in ratios of 100:0, 75:25, 50:50, and 25:75%. The study revealed that increasing the biofuel coproduct inclusion level increased most of the nutritional components linearly (P < 0.05) except starch, which linearly decreased. With increasing biofuel coproduct inclusion level, the rumen degradation rate and the effective degradability of organic matter were not affected (P > 0.05), but the effective degradability of starch was decreased (P < 0.05). Effective degradation of crude protein and neutral detergent fiber as well as predicted truly absorbed protein supply in the small intestine and degraded protein balance were increased (P < 0.05). In conclusion, the inclusion of the biofuel coproduct up to 25-50% in rations improved potential nitrogen and energy synchronization for microbial growth and improved truly absorbable protein supply to the small intestine, without altering energy value.

A novel approach for the improvement of electrostatic behaviour of physically doped TFET using plasma formation and shortening of gate electrode with hetero-gate dielectric

NASA Astrophysics Data System (ADS)

Soni, Deepak; Sharma, Dheeraj; Aslam, Mohd.; Yadav, Shivendra

2018-04-01

This article presents a new device configuration to enhance current drivability and suppress negative conduction (ambipolar conduction) with improved RF characteristics of physically doped TFET. Here, we used a new approach to get excellent electrical characteristics of hetero-dielectric short gate source electrode TFET (HD-SG SE-TFET) by depositing a metal electrode of 5.93 eV work function over the heavily doped source (P+) region. Deposition of metal electrode induces the plasma (thin layer) of holes under the Si/HfO2 interface due to work function difference of metal and semiconductor. Plasma layer of holes is advantageous to increase abruptness as well as decrease the tunneling barrier at source/channel junction for attaining higher tunneling rate of charge carriers (i.e., electrons), which turns into 86.66 times higher ON-state current compared with the conventional physically doped TFET (C-TFET). Along with metal electrode deposition, gate electrode is under-lapped for inducing asymmetrical concentration of charge carriers in the channel region, which is helpful for widening the tunneling barrier width at the drain/channel interface. Consequently, HD-SG SE-TFET shows suppression of ambipolar behavior with reduction in gate-to-drain capacitance which is beneficial for improvement in RF performance. Furthermore, the effectiveness of hetero-gate dielectric concept has been used for improving the RF performance. Furthermore, reliability of C-TFET and proposed structures has been confirmed in term of linearity.

Pachyrhizus ahipa (Wedd.) Parodi roots and flour: Biochemical and functional characteristics.

PubMed

Doporto, María C; Mugridge, Alicia; García, María A; Viña, Sonia Z

2011-06-15

Ahipa roots' chemical composition and physiological parameters were characterised; ahipa flour preparation procedures were selected and the chemical composition and functional properties of these products were studied. Ahipa roots and flour can be considered alternative food sources of gluten-free starch, with a considerable contribution of protein, fibre and minerals, such as potassium, calcium and iron. The grating process for ahipa flour production required a pressing step (AFGP) and the recovery of the starch leached. The slicing procedure (AFS) was simpler and the resulting product showed higher contents of potassium, magnesium, calcium and protein than did AFGP, which showed lower sodium and higher acid detergent fibre contents, together with lower gelatinisation temperature. Both flours differed in terms of α-amylase activity and swelling power, characteristics that may condition their specific applications, such as the incorporation of these flours as gluten-free functional food ingredients. Copyright © 2010 Elsevier Ltd. All rights reserved.

Relationship between landscape characteristics and surface water quality.

PubMed

Chang, C L; Kuan, W H; Lui, P S; Hu, C Y

2008-12-01

The effects of landscape characteristics on surface water quality were evaluated in terms of land-use condition, soil type and slope. The case area, the Chichiawan stream in the Wulin catchment in Taiwan, is Formosan landlocked salmon's natural habitat. Due to the agriculture behavior and mankind's activities, the water and environmental quality has gradually worsened. This study applied WinVAST model to predict hydrological responses and non-point source pollution (NPSP) exports in the Wulin catchment. The land-use condition and the slope of land surface in a catchment are major effect factors for watershed responses, including flows and pollutant exports. This work discussed the possible variation of watershed responses induced by the change of land-use condition, soil type and slope, etc. The results show that hydrological responses are highly relative to the value of Curve Number (CN); Pollutant exports have large relation to the average slope of the land surface in the Wulin catchment.

Comparison of the signal-to-noise characteristics of quantum versus thermal ghost imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Sullivan, Malcolm N.; Chan, Kam Wai Clifford; Boyd, Robert W.

2010-11-15

We present a theoretical comparison of the signal-to-noise characteristics of quantum versus thermal ghost imaging. We first calculate the signal-to-noise ratio of each process in terms of its controllable experimental conditions. We show that a key distinction is that a thermal ghost image always resides on top of a large background; the fluctuations in this background constitutes an intrinsic noise source for thermal ghost imaging. In contrast, there is a negligible intrinsic background to a quantum ghost image. However, for practical reasons involving achievable illumination levels, acquisition times for thermal ghost images are often much shorter than those for quantummore » ghost images. We provide quantitative predictions for the conditions under which each process provides superior performance. Our conclusion is that each process can provide useful functionality, although under complementary conditions.« less

Thermogravimetric characterization and gasification of pecan nut shells.

PubMed

Aldana, Hugo; Lozano, Francisco J; Acevedo, Joaquín; Mendoza, Alberto

2015-12-01

This study focuses on the evaluation of pecan nut shells as an alternative source of energy through pyrolysis and gasification. The physicochemical characteristics of the selected biomass that can influence the process efficiency, consumption rates, and the product yield, as well as create operational problems, were determined. In addition, the thermal decomposition kinetics necessary for prediction of consumption rates and yields were determined. Finally, the performance of a downdraft gasifier fed with pecan nut shells was analyzed in terms of process efficiency and exit gas characteristics. It was found that the pyrolytic decomposition of the nut shells can be modeled adequately using a single equation considering two independent parallel reactions. The performance of the gasification process can be influenced by the particle size and air flow rate, requiring a proper combination of these parameters for reliable operation and production of a valuable syngas. Copyright © 2015 Elsevier Ltd. All rights reserved.

Time-space variations in infrasound sources related to environmental dynamics around Lützow-Holm Bay, east Antarctica

NASA Astrophysics Data System (ADS)

Murayama, Takahiko; Kanao, Masaki; Yamamoto, Masa-Yuki; Ishihara, Yoshiaki; Matsushima, Takeshi; Kakinami, Yoshihiro; Okada, Kazumi; Miyamachi, Hiroki; Nakamoto, Manami; Takeuchi, Yukari; Toda, Shigeru

2017-12-01

Characteristic features of infrasound waves observed in the Antarctic reflect the physical interaction between the surface environment along the continental margin and the surrounding Southern Ocean. The temporal-spatial variability of the source locations for infrasound excitation during the eight-month period between January and August 2015 was investigated using recordings made by two infrasound arrays deployed along a section of the coast of Lützow-Holm Bay (LHB), Antarctica. The infrasound arrays clearly detected temporal variations in frequency content and propagation direction during this period. A number of infrasound sources were identified, many located north of the arrays. Many of the events had a predominant frequency content of a few Hz, higher than microbaroms from the ocean. A comparison of the results with MODIS satellite images indicated that these infrasound sources were ice-quakes associated with the calving of glaciers, the breaking off of sea ice, and collisions between this sea ice and icebergs around the LHB. Continuous measurements of infrasound in the Antarctic may serve as a proxy for monitoring the regional surface environment in terms of climate change at high southern latitudes.

A comprehensive classification method for VOC emission sources to tackle air pollution based on VOC species reactivity and emission amounts.

PubMed

Li, Guohao; Wei, Wei; Shao, Xia; Nie, Lei; Wang, Hailin; Yan, Xiao; Zhang, Rui

2018-05-01

In China, volatile organic compound (VOC) control directives have been continuously released and implemented for important sources and regions to tackle air pollution. The corresponding control requirements were based on VOC emission amounts (EA), but never considered the significant differentiation of VOC species in terms of atmospheric chemical reactivity. This will adversely influence the effect of VOC reduction on air quality improvement. Therefore, this study attempted to develop a comprehensive classification method for typical VOC sources in the Beijing-Tianjin-Hebei region (BTH), by combining the VOC emission amounts with the chemical reactivities of VOC species. Firstly, we obtained the VOC chemical profiles by measuring 5 key sources in the BTH region and referencing another 10 key sources, and estimated the ozone formation potential (OFP) per ton VOC emission for these sources by using the maximum incremental reactivity (MIR) index as the characteristic of source reactivity (SR). Then, we applied the data normalization method to respectively convert EA and SR to normalized EA (NEA) and normalized SR (NSR) for various sources in the BTH region. Finally, the control index (CI) was calculated, and these sources were further classified into four grades based on the normalized CI (NCI). The study results showed that in the BTH region, furniture coating, automobile coating, and road vehicles are characterized by high NCI and need to be given more attention; however, the petro-chemical industry, which was designated as an important control source by air quality managers, has a lower NCI. Copyright © 2017. Published by Elsevier B.V.

Information Source Characteristics and Environmental Scanning by Academic Library Managers

ERIC Educational Resources Information Center

Babalhavaeji, Fahimeh; Farhadpoor, Mohammad Reza

2013-01-01

Purpose: This article examines characteristics of the external environment of library and information centres of Islamic Azad University in Iran, focusing on perceived environmental uncertainty and perceived source accessibility and quality, and their impacts on the amount of scanning and the frequency of information source use. Methods: This…

Bayesian estimation of a source term of radiation release with approximately known nuclide ratios

NASA Astrophysics Data System (ADS)

Tichý, Ondřej; Šmídl, Václav; Hofman, Radek

2016-04-01

We are concerned with estimation of a source term in case of an accidental release from a known location, e.g. a power plant. Usually, the source term of an accidental release of radiation comprises of a mixture of nuclide. The gamma dose rate measurements do not provide a direct information on the source term composition. However, physical properties of respective nuclide (deposition properties, decay half-life) can be used when uncertain information on nuclide ratios is available, e.g. from known reactor inventory. The proposed method is based on linear inverse model where the observation vector y arise as a linear combination y = Mx of a source-receptor-sensitivity (SRS) matrix M and the source term x. The task is to estimate the unknown source term x. The problem is ill-conditioned and further regularization is needed to obtain a reasonable solution. In this contribution, we assume that nuclide ratios of the release is known with some degree of uncertainty. This knowledge is used to form the prior covariance matrix of the source term x. Due to uncertainty in the ratios the diagonal elements of the covariance matrix are considered to be unknown. Positivity of the source term estimate is guaranteed by using multivariate truncated Gaussian distribution. Following Bayesian approach, we estimate all parameters of the model from the data so that y, M, and known ratios are the only inputs of the method. Since the inference of the model is intractable, we follow the Variational Bayes method yielding an iterative algorithm for estimation of all model parameters. Performance of the method is studied on simulated 6 hour power plant release where 3 nuclide are released and 2 nuclide ratios are approximately known. The comparison with method with unknown nuclide ratios will be given to prove the usefulness of the proposed approach. This research is supported by EEA/Norwegian Financial Mechanism under project MSMT-28477/2014 Source-Term Determination of Radionuclide Releases by Inverse Atmospheric Dispersion Modelling (STRADI).

Value of high-sensitivity C-reactive protein assays in predicting atrial fibrillation recurrence: a systematic review and meta-analysis

PubMed Central

Yo, Chia-Hung; Lee, Si-Huei; Chang, Shy-Shin; Lee, Matthew Chien-Hung; Lee, Chien-Chang

2014-01-01

Objectives We performed a systematic review and meta-analysis of studies on high-sensitivity C-reactive protein (hs-CRP) assays to see whether these tests are predictive of atrial fibrillation (AF) recurrence after cardioversion. Design Systematic review and meta-analysis. Data sources PubMed, EMBASE and Cochrane databases as well as a hand search of the reference lists in the retrieved articles from inception to December 2013. Study eligibility criteria This review selected observational studies in which the measurements of serum CRP were used to predict AF recurrence. An hs-CRP assay was defined as any CRP test capable of measuring serum CRP to below 0.6 mg/dL. Primary and secondary outcome measures We summarised test performance characteristics with the use of forest plots, hierarchical summary receiver operating characteristic curves and bivariate random effects models. Meta-regression analysis was performed to explore the source of heterogeneity. Results We included nine qualifying studies comprising a total of 347 patients with AF recurrence and 335 controls. A CRP level higher than the optimal cut-off point was an independent predictor of AF recurrence after cardioversion (summary adjusted OR: 3.33; 95% CI 2.10 to 5.28). The estimated pooled sensitivity and specificity for hs-CRP was 71.0% (95% CI 63% to 78%) and 72.0% (61% to 81%), respectively. Most studies used a CRP cut-off point of 1.9 mg/L to predict long-term AF recurrence (77% sensitivity, 65% specificity), and 3 mg/L to predict short-term AF recurrence (73% sensitivity, 71% specificity). Conclusions hs-CRP assays are moderately accurate in predicting AF recurrence after successful cardioversion. PMID:24556243

[Groups and sources of yeasts in house dust].

PubMed

Glushakova, A M; Zheltikova, T M; Chernov, I Iu

2004-01-01

House dust contains bacteria, mycelial fungi, microarthropods, and yeasts. The house dust samples collected in 25 apartments in Moscow and the Moscow region were found to contain yeasts belonging to the genera Candida, Cryptococcus, Debaryomyces, Rhodotorula, Sporobolomyces, and Trichosporon. The most frequently encountered microorganisms were typical epiphytic yeasts, such as Cryptococcus diffluens and Rhodotorula mucilaginosa, which are capable of long-term preservation in an inactive state. The direct source of epiphytic yeasts occurring in the house dust might be the indoor plants, which were contaminated with these yeasts, albeit to a lesser degree than outdoor plants. Along with the typical epiphytic yeasts, the house dust contained the opportunistic yeast pathogens Candida catenulata, C. guillermondii, C. haemulonii, C. rugosa, and C. tropicalis, which are known as the causal agents of candidiasis. We failed to reveal any correlation between the abundance of particular yeast species in the house dust, residential characteristics, and the atopic dermatitis of the inhabitants.

Razi’s Al-Hawi and saffron (Crocus sativus): a review

PubMed Central

Mollazadeh, Hamid; Emami, Seyyed Ahmad; Hosseinzadeh, Hossein

2015-01-01

Traditional knowledge can be used as a source for development of new medicines. In the present study, we compare the data on saffron in Razi’s Al-Hawi book with modern scientific studies. A computerized search of published articles was performed using MEDLINE, Scopus as well as native references. The search terms used were saffron, Crocus sativus, crocetin, crocin, safranal, Razi, and Al-Hawi. A variety of properties of saffron including diuretic, analgesic, anti-inflammatory, hepatoprotective, appetite suppressant, hypnotic, antidepressant, and bronchodilator effects were mentioned in Al-Hawi. Modern studies also confirmed most of these characteristics. This review indicates that the pharmacological data on saffron and its constituents are similar to those found in Razi’s Al-Hawi monograph and it can be concluded that ethnobotanical information and ancient sources have precious data about medicinal plants that lead to finding new compounds for treatment of several diseases. PMID:26877844

DOE Office of Scientific and Technical Information (OSTI.GOV)

Han, Dong-Suk; Kang, Yu-Jin; Park, Jae-Hyung

Highlights: • We developed and investigated source/drain electrodes in oxide TFTs. • The Mo S/D electrodes showed good output characteristics. • Intrinsic TFT parameters were calculated by the transmission line method. - Abstract: This paper investigates the feasibility of a low-resistivity electrode material (Mo) for source/drain (S/D) electrodes in thin film transistors (TFTs). The effective resistances between Mo source/drain electrodes and amorphous zinc–tin-oxide (a-ZTO) thin film transistors were studied. Intrinsic TFT parameters were calculated by the transmission line method (TLM) using a series of TFTs with different channel lengths measured at a low source/drain voltage. The TFTs fabricated with Momore » source/drain electrodes showed good transfer characteristics with a field-effect mobility of 10.23 cm{sup 2}/V s. In spite of slight current crowding effects, the Mo source/drain electrodes showed good output characteristics with a steep rise in the low drain-to-source voltage (V{sub DS}) region.« less

Predicting DNAPL Source Zone and Plume Response Using Site-Measured Characteristics

DTIC Science & Technology

2017-05-19

FINAL REPORT Predicting DNAPL Source Zone and Plume Response Using Site- Measured Characteristics SERDP Project ER-1613 MAY 2017...Final Report 3. DATES COVERED (From - To) 2007 - 2017 4. TITLE AND SUBTITLE PREDICTING DNAPL SOURCE ZONE AND PLUME RESPONSE USING SITE- MEASURED ...historical record of concentration and head measurements , particularly in the near-source region. For each site considered, currently available data

The investigation of short-term variations of Jupiter's Synchrotron Radiation with the large radio interferometer GMRT

NASA Astrophysics Data System (ADS)

Imai, Kota; Misawa, Hiroaki; Bhardwaj, Anil; Tsuchiya, Fuminori; Doi, Akihiro; Kondo, Tetsuro; Morioka, Akira

The goal of this research is to investigate physical processes of short term variations of Jupiter's Synchrotron Radiation (JSR) which is important for revealing the origin of relativistic electrons at Jupiter's Radiation Belt (JRB). JSR has been frequently observed by radio interferometers and single dish radio telescopes to understand characteristics of the spatial distribution and variations inferring dynamics and energetics of the relativistic electrons. Observations with radio interferometers have showed JSR source structure (Dunn et al., 2003, etc), and contributed to modeling of JRB (Garrett et al., 2005, etc). On the other hand, observations of total intensity of JSR with a single dish radio telescope have revealed characteristics of time variable phenomena. The time variations are indispensable parameters giving clues to understand particle source and/or loss processes which characterize the formation of JRB. Recently, Miyoshi et al. (1999) and Bolton et al. (2002) confirmed the existence of short term (days to weeks) variations in JSR. The detection of short term variations makes a great impact on the study on JRB because it has been believed for a long time that the strong internal magnetic field and rapidly rotating magnetosphere of Jupiter protect the JRB region from solar wind variations and magnetospheric disturbances as theoretically suggested by de Pater and Goertz (1994). So far we have made the JSR observations to investigate the short term variations of mainly several hundreds MHz JSR which is emitted by low energy particles (< 10MeV) and has been observed systematically only few times (Miyoshi et al., 1999, Misawa et al., 2005, etc). The latter observation suggested that the short term variation is a general feature at low frequencies. Therefore, it is essential to study its detailed characteristics and the causalities. Theoretically expected physical processes which are responsible for the short term variation are enhanced radial diffusion initiated by solar UV flux enhancement and scattering of the JRB particles toward the polar region by whistler-mode wave, although it is still not known whether solar UV flux or whistler-mode wave is a dominant initiator. In order to investigate physical processes of short term variations, we observed JSR with the Giant Metrewave Radio Telescope (GMRT) from 23rd May 2007 to 27th June 2007. Bhardwaj et al. (2005) first made JSR observations with the GMRT for about a week in 2003 and suggested that JSR flux increased with Solar 10.7cm radio flux (F10.7), which is correlated to solar UV flux. On the other hand, the initial results of GMRT observation in 2007 show that the total flux of JSR varies in several days but is not strongly correlated to F10.7. Then, when the total flux of JSR increased, the peak position of JSR moved outward, and the flux of JSR increased in the outer emitting region. It is implied that the other acceleration processes cause these variations except the enhanced radial diffusion, because enhanced radial diffusion increases the flux of JSR and the peak position of JSR moves toward Jupiter. In this presentation, we will discuss the variations of JSR spatial distribution shown in the 2007 GMRT observation results. Acknowledgement: We would like to appreciate helpful support of Ishwara Chandra C. H. And, we thank the staff of the GMRT who have made these observations possible. GMRT is run by the National Centre for Radio Astrophysics of the Tata Institute of Fundamental Research.

10 CFR 50.67 - Accident source term.

Code of Federal Regulations, 2014 CFR

2014-01-01

... occupancy of the control room under accident conditions without personnel receiving radiation exposures in... 10 Energy 1 2014-01-01 2014-01-01 false Accident source term. 50.67 Section 50.67 Energy NUCLEAR... Conditions of Licenses and Construction Permits § 50.67 Accident source term. (a) Applicability. The...

10 CFR 50.67 - Accident source term.

Code of Federal Regulations, 2012 CFR

2012-01-01

... occupancy of the control room under accident conditions without personnel receiving radiation exposures in... 10 Energy 1 2012-01-01 2012-01-01 false Accident source term. 50.67 Section 50.67 Energy NUCLEAR... Conditions of Licenses and Construction Permits § 50.67 Accident source term. (a) Applicability. The...

10 CFR 50.67 - Accident source term.

Code of Federal Regulations, 2010 CFR

2010-01-01

... occupancy of the control room under accident conditions without personnel receiving radiation exposures in... 10 Energy 1 2010-01-01 2010-01-01 false Accident source term. 50.67 Section 50.67 Energy NUCLEAR... Conditions of Licenses and Construction Permits § 50.67 Accident source term. (a) Applicability. The...

10 CFR 50.67 - Accident source term.

Code of Federal Regulations, 2013 CFR

2013-01-01

... occupancy of the control room under accident conditions without personnel receiving radiation exposures in... 10 Energy 1 2013-01-01 2013-01-01 false Accident source term. 50.67 Section 50.67 Energy NUCLEAR... Conditions of Licenses and Construction Permits § 50.67 Accident source term. (a) Applicability. The...

10 CFR 50.67 - Accident source term.

Code of Federal Regulations, 2011 CFR

2011-01-01

... occupancy of the control room under accident conditions without personnel receiving radiation exposures in... 10 Energy 1 2011-01-01 2011-01-01 false Accident source term. 50.67 Section 50.67 Energy NUCLEAR... Conditions of Licenses and Construction Permits § 50.67 Accident source term. (a) Applicability. The...

Modeling and analysis of CSAMT field source effect and its characteristics

NASA Astrophysics Data System (ADS)

Da, Lei; Xiaoping, Wu; Qingyun, Di; Gang, Wang; Xiangrong, Lv; Ruo, Wang; Jun, Yang; Mingxin, Yue

2016-02-01

Controlled-source audio-frequency magnetotellurics (CSAMT) has been a highly successful geophysical tool used in a variety of geological exploration studies for many years. However, due to the artificial source used in the CSAMT technique, two important factors are considered during interpretation: non-plane-wave or geometric effects and source overprint effects. Hence, in this paper we simulate the source overprint effects and analyzed the rule and characteristics of its influence on CSAMT applications. Two-dimensional modeling was carried out using an adaptive unstructured finite element method to simulate several typical models. Also, we summarized the characteristics and rule of the source overprint effects and analyzed its influence on the data taken over several mining areas. The results obtained from the study shows that the occurrence and strength of the source overprint effect is dependent on the location of the source dipole, in relation to the receiver and the subsurface geology. In order to avoid source overprint effects, three principle were suggested to determine the best location for the grounded dipole source in the field.

Long-Term Evolution of the Hypervariable Region of Hepatitis C Virus in a Common-Source-Infected Cohort

PubMed Central

McAllister, Jane; Casino, Carmela; Davidson, Fiona; Power, Joan; Lawlor, Emer; Yap, Peng Lee; Simmonds, Peter; Smith, Donald B.

1998-01-01

The long-term evolution of the hepatitis C virus hypervariable region (HVR) and flanking regions of the E1 and E2 envelope proteins have been studied in a cohort of women infected from a common source of anti-D immunoglobulin. Whereas virus sequences in the infectious source were relatively homogeneous, distinct HVR variants were observed in each anti-D recipient, indicating that this region can evolve in multiple directions from the same point. Where HVR variants with dissimilar sequences were present in a single individual, the frequency of synonymous substitution in the flanking regions suggested that the lineages diverged more than a decade previously. Even where a single major HVR variant was present in an infected individual, this lineage was usually several years old. Multiple lineages can therefore coexist during long periods of chronic infection without replacement. The characteristics of amino acid substitution in the HVR were not consistent with the random accumulation of mutations and imply that amino acid replacement in the HVR was strongly constrained. Another variable region of E2 centered on codon 60 shows similar constraints, while HVR2 was relatively unconstrained. Several of these features are difficult to explain if a neutralizing immune response against the HVR is the only selective force operating on E2. The impact of PCR artifacts such as nucleotide misincorporation and the shuffling of dissimilar templates is discussed. PMID:9573256

Sensitivity of WRF-chem predictions to dust source function specification in West Asia

NASA Astrophysics Data System (ADS)

Nabavi, Seyed Omid; Haimberger, Leopold; Samimi, Cyrus

2017-02-01

Dust storms tend to form in sparsely populated areas covered by only few observations. Dust source maps, known as source functions, are used in dust models to allocate a certain potential of dust release to each place. Recent research showed that the well known Ginoux source function (GSF), currently used in Weather Research and Forecasting Model coupled with Chemistry (WRF-chem), exhibits large errors over some regions in West Asia, particularly near the IRAQ/Syrian border. This study aims to improve the specification of this critical part of dust forecasts. A new source function based on multi-year analysis of satellite observations, called West Asia source function (WASF), is therefore proposed to raise the quality of WRF-chem predictions in the region. WASF has been implemented in three dust schemes of WRF-chem. Remotely sensed and ground-based observations have been used to verify the horizontal and vertical extent and location of simulated dust clouds. Results indicate that WRF-chem performance is significantly improved in many areas after the implementation of WASF. The modified runs (long term simulations over the summers 2008-2012, using nudging) have yielded an average increase of Spearman correlation between observed and forecast aerosol optical thickness by 12-16 percent points compared to control runs with standard source functions. They even outperform MACC and DREAM dust simulations over many dust source regions. However, the quality of the forecasts decreased with distance from sources, probably due to deficiencies in the transport and deposition characteristics of the forecast model in these areas.

Acceleration of auroral electrons in parallel electric fields

NASA Technical Reports Server (NTRS)

Kaufmann, R. L.; Walker, D. N.; Arnoldy, R. L.

1976-01-01

Rocket observations of auroral electrons are compared with the predictions of a number of theoretical acceleration mechanisms that involve an electric field parallel to the earth's magnetic field. The theoretical models are discussed in terms of required plasma sources, the location of the acceleration region, and properties of necessary wave-particle scattering mechanisms. We have been unable to find any steady state scatter-free electric field configuration that predicts electron flux distributions in agreement with the observations. The addition of a fluctuating electric field or wave-particle scattering several thousand kilometers above the rocket can modify the theoretical flux distributions so that they agree with measurements. The presence of very narrow energy peaks in the flux contours implies a characteristic temperature of several tens of electron volts or less for the source of field-aligned auroral electrons and a temperature of several hundred electron volts or less for the relatively isotropic 'monoenergetic' auroral electrons. The temperature of the field-aligned electrons is more representative of the magnetosheath or possibly the ionosphere as a source region than of the plasma sheet.

DC and analog/RF performance optimisation of source pocket dual work function TFET

NASA Astrophysics Data System (ADS)

Raad, Bhagwan Ram; Sharma, Dheeraj; Kondekar, Pravin; Nigam, Kaushal; Baronia, Sagar

2017-12-01

We investigate a systematic study of source pocket tunnel field-effect transistor (SP TFET) with dual work function of single gate material by using uniform and Gaussian doping profile in the drain region for ultra-low power high frequency high speed applications. For this, a n+ doped region is created near the source/channel junction to decrease the depletion width results in improvement of ON-state current. However, the dual work function of the double gate is used for enhancement of the device performance in terms of DC and analog/RF parameters. Further, to improve the high frequency performance of the device, Gaussian doping profile is considered in the drain region with different characteristic lengths which decreases the gate to drain capacitance and leads to drastic improvement in analog/RF figures of merit. Furthermore, the optimisation is performed with different concentrations for uniform and Gaussian drain doping profile and for various sectional length of lower work function of the gate electrode. Finally, the effect of temperature variation on the device performance is demonstrated.

Numerical and experimental study of the fundamental flow characteristics of a 3D gully box under drainage.

PubMed

Lopes, Pedro; Carvalho, Rita F; Leandro, Jorge

2017-05-01

Numerical studies regarding the influence of entrapped air on the hydraulic performance of gullies are nonexistent. This is due to the lack of a model that simulates the air-entrainment phenomena and consequently the entrapped air. In this work, we used experimental data to validate an air-entrainment model that uses a Volume-of-Fluid based method to detect the interface and the Shear-stress transport k-ω turbulence model. The air is detected in a sub-grid scale, generated by a source term and transported using a slip velocity formulation. Results are shown in terms of free-surface elevation, velocity profiles, turbulent kinetic energy and discharge coefficients. The air-entrainment model allied to the turbulence model showed a good accuracy in the prediction of the zones of the gully where the air is more concentrated.

Enhancing managerial effectiveness in dietetics.

PubMed

Hoover, L W

1983-01-01

Environmental pressures from such sources as economic conditions, the government, third-party payers, and inter-institutional competition create managerial challenges. Although cost-containment has received considerable attention, long-term cost-effectiveness is probably the significant issue. Dietitians must become more cost-conscious and effective in resource management to attain desired performance outcomes. Some of the skills and characteristics essential to managerial effectiveness are a marketing orientation, systems design skill, quantitative operations management techniques, financial expertise, and leadership. These abilities facilitate decision-making and achievement of long-term cost-effectiveness. Curriculum enhancement and continuing education are two strategies for improving managerial competency in the dietetics profession. In dietetics education, study of management topics should be enhanced to provide more advanced coverage of management theories and quantitative models so that managerial performance can be at a higher level of sophistication and competency. To assure the viability of the dietetics profession, the emphasis on management must be more comprehensive and rigorous.

Big data for health.

PubMed

Andreu-Perez, Javier; Poon, Carmen C Y; Merrifield, Robert D; Wong, Stephen T C; Yang, Guang-Zhong

2015-07-01

This paper provides an overview of recent developments in big data in the context of biomedical and health informatics. It outlines the key characteristics of big data and how medical and health informatics, translational bioinformatics, sensor informatics, and imaging informatics will benefit from an integrated approach of piecing together different aspects of personalized information from a diverse range of data sources, both structured and unstructured, covering genomics, proteomics, metabolomics, as well as imaging, clinical diagnosis, and long-term continuous physiological sensing of an individual. It is expected that recent advances in big data will expand our knowledge for testing new hypotheses about disease management from diagnosis to prevention to personalized treatment. The rise of big data, however, also raises challenges in terms of privacy, security, data ownership, data stewardship, and governance. This paper discusses some of the existing activities and future opportunities related to big data for health, outlining some of the key underlying issues that need to be tackled.

Doors for memory: A searchable database.

PubMed

Baddeley, Alan D; Hitch, Graham J; Quinlan, Philip T; Bowes, Lindsey; Stone, Rob

2016-11-01

The study of human long-term memory has for over 50 years been dominated by research on words. This is partly due to lack of suitable nonverbal materials. Experience in developing a clinical test suggested that door scenes can provide an ecologically relevant and sensitive alternative to the faces and geometrical figures traditionally used to study visual memory. In pursuing this line of research, we have accumulated over 2000 door scenes providing a database that is categorized on a range of variables including building type, colour, age, condition, glazing, and a range of other physical characteristics. We describe an illustrative study of recognition memory for 100 doors tested by yes/no, two-alternative, or four-alternative forced-choice paradigms. These stimuli, together with the full categorized database, are available through a dedicated website. We suggest that door scenes provide an ecologically relevant and participant-friendly source of material for studying the comparatively neglected field of visual long-term memory.

Groundwater Pollution Source Identification using Linked ANN-Optimization Model

NASA Astrophysics Data System (ADS)

Ayaz, Md; Srivastava, Rajesh; Jain, Ashu

2014-05-01

Groundwater is the principal source of drinking water in several parts of the world. Contamination of groundwater has become a serious health and environmental problem today. Human activities including industrial and agricultural activities are generally responsible for this contamination. Identification of groundwater pollution source is a major step in groundwater pollution remediation. Complete knowledge of pollution source in terms of its source characteristics is essential to adopt an effective remediation strategy. Groundwater pollution source is said to be identified completely when the source characteristics - location, strength and release period - are known. Identification of unknown groundwater pollution source is an ill-posed inverse problem. It becomes more difficult for real field conditions, when the lag time between the first reading at observation well and the time at which the source becomes active is not known. We developed a linked ANN-Optimization model for complete identification of an unknown groundwater pollution source. The model comprises two parts- an optimization model and an ANN model. Decision variables of linked ANN-Optimization model contain source location and release period of pollution source. An objective function is formulated using the spatial and temporal data of observed and simulated concentrations, and then minimized to identify the pollution source parameters. In the formulation of the objective function, we require the lag time which is not known. An ANN model with one hidden layer is trained using Levenberg-Marquardt algorithm to find the lag time. Different combinations of source locations and release periods are used as inputs and lag time is obtained as the output. Performance of the proposed model is evaluated for two and three dimensional case with error-free and erroneous data. Erroneous data was generated by adding uniformly distributed random error (error level 0-10%) to the analytically computed concentration values. The main advantage of the proposed model is that it requires only upper half of the breakthrough curve and is capable of predicting source parameters when the lag time is not known. Linking of ANN model with proposed optimization model reduces the dimensionality of the decision variables of the optimization model by one and hence complexity of optimization model is reduced. The results show that our proposed linked ANN-Optimization model is able to predict the source parameters for the error-free data accurately. The proposed model was run several times to obtain the mean, standard deviation and interval estimate of the predicted parameters for observations with random measurement errors. It was observed that mean values as predicted by the model were quite close to the exact values. An increasing trend was observed in the standard deviation of the predicted values with increasing level of measurement error. The model appears to be robust and may be efficiently utilized to solve the inverse pollution source identification problem.

Piecewise synonyms for enhanced UMLS source terminology integration.

PubMed

Huang, Kuo-Chuan; Geller, James; Halper, Michael; Cimino, James J

2007-10-11

The UMLS contains more than 100 source vocabularies and is growing via the integration of others. When integrating a new source, the source terms already in the UMLS must first be found. The easiest approach to this is simple string matching. However, string matching usually does not find all concepts that should be found. A new methodology, based on the notion of piecewise synonyms, for enhancing the process of concept discovery in the UMLS is presented. This methodology is supported by first creating a general synonym dictionary based on the UMLS. Each multi-word source term is decomposed into its component words, allowing for the generation of separate synonyms for each word from the general synonym dictionary. The recombination of these synonyms into new terms creates an expanded pool of matching candidates for terms from the source. The methodology is demonstrated with respect to an existing UMLS source. It shows a 34% improvement over simple string matching.

Listening to Schneiderian Voices: A Novel Phenomenological Analysis

PubMed Central

Rosen, Cherise; Chase, Kayla A.; Jones, Nev; Grossman, Linda S.; Gin, Hannah; Sharma, Rajiv P.

2016-01-01

Background/Aims This paper reports on analyses designed to elucidate phenomenological characteristics, content and experience specifically targeting participants with Schneiderian voices conversing/commenting (VC) while exploring difference in clinical presentation and quality of life compared to those with voices not conversing (VNC). Methods This mixed-method investigation of Schneiderian voices included standardized clinical metrics and exploratory phenomenological interviews designed to elicit in-depth information about characteristics, content, meaning and personification of AVHs. Results The subjective experience of VC show a striking pattern of VC that are experienced as internal at initial onset and during longer-term course of illness when compared to the VNC group. Participants in the VC group were more likely to attribute origins of their voices to an external source such as God, telepathic communication, or mediumistic sources. VC and VNC were described as characterological entities that were distinct from self (I/we versus you). We also found an association between VC and positive, cognitive, and depression symptom profile. However, we did not find a significant group difference in overall quality of life. Conclusions The clinical portrait of VC is complex, multisensory, and distinct, and suggests a need for further research into biopsychosocial interface between subjective experience, socioenvironmental constraints, individual psychology, and biological architecture of intersecting symptoms. PMID:27304081

Optimization of optical properties of photonic crystal fibers infiltrated with carbon tetrachloride for supercontinuum generation with subnanojoule femtosecond pulses.

PubMed

Dinh, Quang Ho; Pniewski, Jacek; Van, Hieu Le; Ramaniuk, Aleksandr; Long, Van Cao; Borzycki, Krzysztof; Xuan, Khoa Dinh; Klimczak, Mariusz; Buczyński, Ryszard

2018-05-10

A photonic crystal fiber (PCF) made of fused silica glass, infiltrated with carbon tetrachloride (CCl 4 ), is proposed as a new source of supercontinuum (SC) light. Guiding properties in terms of effective refractive index, attenuation, and dispersion of the fundamental mode are studied numerically. As a result, two optimized structures are selected and verified against SC generation in detail. The dispersion characteristic of the first structure has the zero-dispersion wavelength at 1.252 μm, while the dispersion characteristic of the second structure is all-normal and equals -4.37  ps·nm -1 ·km -1 at 1.55 μm. SC generation was demonstrated for the wavelengths 1.064 μm, 1.35 μm, and 1.55 μm. We prove the possibility of coherent, octave-spanning SC generation with 300 fs pulses with only 0.8 nJ of energy in-coupled into the core with each of the studied structures. Proposed fibers are fully compatible with all-silica fiber systems and PCFs with wide mode area, and can also be used for all-fiber SC sources. The proposed solution may lead to new low-cost all-fiber optical systems.

A computational geometry approach to pore network construction for granular packings

NASA Astrophysics Data System (ADS)

van der Linden, Joost H.; Sufian, Adnan; Narsilio, Guillermo A.; Russell, Adrian R.; Tordesillas, Antoinette

2018-03-01

Pore network construction provides the ability to characterize and study the pore space of inhomogeneous and geometrically complex granular media in a range of scientific and engineering applications. Various approaches to the construction have been proposed, however subtle implementational details are frequently omitted, open access to source code is limited, and few studies compare multiple algorithms in the context of a specific application. This study presents, in detail, a new pore network construction algorithm, and provides a comprehensive comparison with two other, well-established Delaunay triangulation-based pore network construction methods. Source code is provided to encourage further development. The proposed algorithm avoids the expensive non-linear optimization procedure in existing Delaunay approaches, and is robust in the presence of polydispersity. Algorithms are compared in terms of structural, geometrical and advanced connectivity parameters, focusing on the application of fluid flow characteristics. Sensitivity of the various networks to permeability is assessed through network (Stokes) simulations and finite-element (Navier-Stokes) simulations. Results highlight strong dependencies of pore volume, pore connectivity, throat geometry and fluid conductance on the degree of tetrahedra merging and the specific characteristics of the throats targeted by the merging algorithm. The paper concludes with practical recommendations on the applicability of the three investigated algorithms.

Lobed Mixer Design for Noise Suppression Acoustic and Aerodynamic Test Data Analysis

NASA Technical Reports Server (NTRS)

Mengle, Vinod G.; Dalton, William N.; Boyd, Kathleen (Technical Monitor); Bridges, James (Technical Monitor)

2002-01-01

A comprehensive database for the acoustic and aerodynamic characteristics of several model-scale lobe mixers of bypass ratio 5 to 6 has been created for mixed jet speeds up to 1080 ft/s at typical take-off (TO) conditions of small-to-medium turbofan engines. The flight effect was simulated for Mach numbers up to 0.3. The static thrust performance and plume data were also obtained at typical TO and cruise conditions. The tests were done at NASA Lewis anechoic dome and ASK's FluiDyne Laboratories. The effect of several lobe mixer and nozzle parameters, such as, lobe scalloping, lobe count, lobe penetration and nozzle length was examined in terms of flyover noise at constant altitude. Sound in the nozzle reference frame was analyzed to understand the source characteristics. Several new concepts, mechanisms and methods are reported for such lobed mixers, such as, "boomerang" scallops, "tongue" mixer, detection of "excess" internal noise sources, and extrapolation of flyover noise data from one flight speed to different flight speeds. Noise reduction of as much as 3 EPNdB was found with a deeply scalloped mixer compared to annular nozzle at net thrust levels of 9500 lb for a 29 in. diameter nozzle after optimizing the nozzle length.

A New Data Representation Based on Training Data Characteristics to Extract Drug Name Entity in Medical Text

PubMed Central

Basaruddin, T.

2016-01-01

One essential task in information extraction from the medical corpus is drug name recognition. Compared with text sources come from other domains, the medical text mining poses more challenges, for example, more unstructured text, the fast growing of new terms addition, a wide range of name variation for the same drug, the lack of labeled dataset sources and external knowledge, and the multiple token representations for a single drug name. Although many approaches have been proposed to overwhelm the task, some problems remained with poor F-score performance (less than 0.75). This paper presents a new treatment in data representation techniques to overcome some of those challenges. We propose three data representation techniques based on the characteristics of word distribution and word similarities as a result of word embedding training. The first technique is evaluated with the standard NN model, that is, MLP. The second technique involves two deep network classifiers, that is, DBN and SAE. The third technique represents the sentence as a sequence that is evaluated with a recurrent NN model, that is, LSTM. In extracting the drug name entities, the third technique gives the best F-score performance compared to the state of the art, with its average F-score being 0.8645. PMID:27843447

Research on Matching Method of Power Supply Parameters for Dual Energy Source Electric Vehicles

NASA Astrophysics Data System (ADS)

Jiang, Q.; Luo, M. J.; Zhang, S. K.; Liao, M. W.

2018-03-01

A new type of power source is proposed, which is based on the traffic signal matching method of the dual energy source power supply composed of the batteries and the supercapacitors. First, analyzing the power characteristics is required to meet the excellent dynamic characteristics of EV, studying the energy characteristics is required to meet the mileage requirements and researching the physical boundary characteristics is required to meet the physical conditions of the power supply. Secondly, the parameter matching design with the highest energy efficiency is adopted to select the optimal parameter group with the method of matching deviation. Finally, the simulation analysis of the vehicle is carried out in MATLABSimulink, The mileage and energy efficiency of dual energy sources are analyzed in different parameter models, and the rationality of the matching method is verified.

Transfer function analysis of thermospheric perturbations

NASA Technical Reports Server (NTRS)

Mayr, H. G.; Harris, I.; Varosi, F.; Herrero, F. A.; Spencer, N. W.

1986-01-01

Applying perturbation theory, a spectral model in terms of vectors spherical harmonics (Legendre polynomials) is used to describe the short term thermospheric perturbations originating in the auroral regions. The source may be Joule heating, particle precipitation or ExB ion drift-momentum coupling. A multiconstituent atmosphere is considered, allowing for the collisional momentum exchange between species including Ar, O2, N2, O, He and H. The coupled equations of energy, mass and momentum conservation are solved simultaneously for the major species N2 and O. Applying homogeneous boundary conditions, the integration is carred out from the Earth's surface up to 700 km. In the analysis, the spherical harmonics are treated as eigenfunctions, assuming that the Earth's rotation (and prevailing circulation) do not significantly affect perturbations with periods which are typically much less than one day. Under these simplifying assumptions, and given a particular source distribution in the vertical, a two dimensional transfer function is constructed to describe the three dimensional response of the atmosphere. In the order of increasing horizontal wave numbers (order of polynomials), this transfer function reveals five components. To compile the transfer function, the numerical computations are very time consuming (about 100 hours on a VAX for one particular vertical source distribution). However, given the transfer function, the atmospheric response in space and time (using Fourier integral representation) can be constructed with a few seconds of a central processing unit. This model is applied in a case study of wind and temperature measurements on the Dynamics Explorer B, which show features characteristic of a ringlike excitation source in the auroral oval. The data can be interpreted as gravity waves which are focused (and amplified) in the polar region and then are reflected to propagate toward lower latitudes.

Transfer function analysis of thermospheric perturbations

NASA Astrophysics Data System (ADS)

Mayr, H. G.; Harris, I.; Varosi, F.; Herrero, F. A.; Spencer, N. W.

1986-06-01

Applying perturbation theory, a spectral model in terms of vectors spherical harmonics (Legendre polynomials) is used to describe the short term thermospheric perturbations originating in the auroral regions. The source may be Joule heating, particle precipitation or ExB ion drift-momentum coupling. A multiconstituent atmosphere is considered, allowing for the collisional momentum exchange between species including Ar, O2, N2, O, He and H. The coupled equations of energy, mass and momentum conservation are solved simultaneously for the major species N2 and O. Applying homogeneous boundary conditions, the integration is carred out from the Earth's surface up to 700 km. In the analysis, the spherical harmonics are treated as eigenfunctions, assuming that the Earth's rotation (and prevailing circulation) do not significantly affect perturbations with periods which are typically much less than one day. Under these simplifying assumptions, and given a particular source distribution in the vertical, a two dimensional transfer function is constructed to describe the three dimensional response of the atmosphere. In the order of increasing horizontal wave numbers (order of polynomials), this transfer function reveals five components. To compile the transfer function, the numerical computations are very time consuming (about 100 hours on a VAX for one particular vertical source distribution). However, given the transfer function, the atmospheric response in space and time (using Fourier integral representation) can be constructed with a few seconds of a central processing unit. This model is applied in a case study of wind and temperature measurements on the Dynamics Explorer B, which show features characteristic of a ringlike excitation source in the auroral oval. The data can be interpreted as gravity waves which are focused (and amplified) in the polar region and then are reflected to propagate toward lower latitudes.

Chemical characteristic and toxicity assessment of particle associated PAHs for the short-term anthropogenic activity event: During the Chinese New Year's Festival in 2013.

PubMed

Shi, Guo-Liang; Liu, Gui-Rong; Tian, Ying-Ze; Zhou, Xiao-Yu; Peng, Xing; Feng, Yin-Chang

2014-06-01

PM10 and PM2.5 samples were simultaneously collected during a period which covered the Chinese New Year's (CNY) Festival. The concentrations of particulate matter (PM) and 16 polycyclic aromatic hydrocarbons (PAHs) were measured. The possible source contributions and toxicity risks were estimated for Festival and non-Festival periods. According to the diagnostic ratios and Multilinear Engine 2 (ME2), three sources were identified and their contributions were calculated: vehicle emission (48.97% for PM10, 53.56% for PM2.5), biomass & coal combustion (36.83% for PM10, 28.76% for PM2.5), and cook emission (22.29% for PM10, 27.23% for PM2.5). An interesting result was found: although the PAHs are not directly from the fireworks display, they were still indirectly influenced by biomass combustion which is affiliated with the fireworks display. Additionally, toxicity risks of different sources were estimated by Multilinear Engine 2-BaP equivalent (ME2-BaPE): vehicle emission (54.01% for PM10, 55.42% for PM2.5), cook emission (25.59% for PM10, 29.05% for PM2.5), and biomass & coal combustion source (20.90% for PM10, 14.28% for PM2.5). It is worth to be noticed that the toxicity contribution of cook emission was considerable in Festival period. The findings can provide useful information to protect the urban human health, as well as develop the effective air control strategies in special short-term anthropogenic activity event. Copyright © 2014 Elsevier B.V. All rights reserved.

Internet as a Source of Long-Term and Real-Time Professional, Psychological, and Nutritional Treatment: A Qualitative Case Study Among Former Israeli Soviet Union Immigrants.

PubMed

Gesser-Edelsburg, Anat; Shalayeva, Svetlana

2017-02-03

The Internet is considered to be an effective source of health information and consultation for immigrants. Nutritional interventions for immigrants have become increasingly common over the past few decades. However, each population of immigrants has specific needs. Understanding the factors influencing the success of nutrition programs among immigrants requires an examination of their attitudes and perceptions, as well as their cultural values. The purpose of this study was to examine perceptions of the Internet as a tool for long-term and "real-time" professional, psychological, and nutritional treatment for immigrants from the former Soviet Union who immigrated to Israel (IIFSU) from 1990 to 2012. A sample of nutrition forum users (n=18) was interviewed and comments of 80 users were analyzed qualitatively in accordance with the grounded theory principles. The results show that IIFSU perceive the Internet as a platform for long-term and "real-time" dietary treatment and not just as an informative tool. IIFSU report benefits of online psychological support with professional dietary treatment. They attribute importance to cultural customization, which helps reduce barriers to intervention. In light of the results, when formulating nutritional programs, it is essential to have a specific understanding of immigrants' cultural characteristics and their patterns of Internet use concerning dietary care. ©Anat Gesser-Edelsburg, Svetlana Shalayeva. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 03.02.2017.

Near-Source Shaking and Dynamic Rupture in Plastic Media

NASA Astrophysics Data System (ADS)

Gabriel, A.; Mai, P. M.; Dalguer, L. A.; Ampuero, J. P.

2012-12-01

Recent well recorded earthquakes show a high degree of complexity at the source level that severely affects the resulting ground motion in near and far-field seismic data. In our study, we focus on investigating source-dominated near-field ground motion features from numerical dynamic rupture simulations in an elasto-visco-plastic bulk. Our aim is to contribute to a more direct connection from theoretical and computational results to field and seismological observations. Previous work showed that a diversity of rupture styles emerges from simulations on faults governed by velocity-and-state-dependent friction with rapid velocity-weakening at high slip rate. For instance, growing pulses lead to re-activation of slip due to gradual stress build-up near the hypocenter, as inferred in some source studies of the 2011 Tohoku-Oki earthquake. Moreover, off-fault energy dissipation implied physical limits on extreme ground motion by limiting peak slip rate and rupture velocity. We investigate characteristic features in near-field strong ground motion generated by dynamic in-plane rupture simulations. We present effects of plasticity on source process signatures, off-fault damage patterns and ground shaking. Independent of rupture style, asymmetric damage patterns across the fault are produced that contribute to the total seismic moment, and even dominantly at high angles between the fault and the maximum principal background stress. The off-fault plastic strain fields induced by transitions between rupture styles reveal characteristic signatures of the mechanical source processes during the transition. Comparing different rupture styles in elastic and elasto-visco-plastic media to identify signatures of off-fault plasticity, we find varying degrees of alteration of near-field radiation due to plastic energy dissipation. Subshear pulses suffer more peak particle velocity reduction due to plasticity than cracks. Supershear ruptures are affected even more. The occurrence of multiple rupture fronts affect seismic potency release rate, amplitude spectra, peak particle velocity distributions and near-field seismograms. Our simulations enable us to trace features of source processes in synthetic seismograms, for example exhibiting a re-activation of slip. Such physical models may provide starting points for future investigations of field properties of earthquake source mechanisms and natural fault conditions. In the long-term, our findings may be helpful for seismic hazard analysis and the improvement of seismic source models.

Low birth weight and air pollution in California: Which sources and components drive the risk?

PubMed

Laurent, Olivier; Hu, Jianlin; Li, Lianfa; Kleeman, Michael J; Bartell, Scott M; Cockburn, Myles; Escobedo, Loraine; Wu, Jun

2016-01-01

Intrauterine growth restriction has been associated with exposure to air pollution, but there is a need to clarify which sources and components are most likely responsible. This study investigated the associations between low birth weight (LBW, <2500g) in term born infants (≥37 gestational weeks) and air pollution by source and composition in California, over the period 2001-2008. Complementary exposure models were used: an empirical Bayesian kriging model for the interpolation of ambient pollutant measurements, a source-oriented chemical transport model (using California emission inventories) that estimated fine and ultrafine particulate matter (PM2.5 and PM0.1, respectively) mass concentrations (4km×4km) by source and composition, a line-source roadway dispersion model at fine resolution, and traffic index estimates. Birth weight was obtained from California birth certificate records. A case-cohort design was used. Five controls per term LBW case were randomly selected (without covariate matching or stratification) from among term births. The resulting datasets were analyzed by logistic regression with a random effect by hospital, using generalized additive mixed models adjusted for race/ethnicity, education, maternal age and household income. In total 72,632 singleton term LBW cases were included. Term LBW was positively and significantly associated with interpolated measurements of ozone but not total fine PM or nitrogen dioxide. No significant association was observed between term LBW and primary PM from all sources grouped together. A positive significant association was observed for secondary organic aerosols. Exposure to elemental carbon (EC), nitrates and ammonium were also positively and significantly associated with term LBW, but only for exposure during the third trimester of pregnancy. Significant positive associations were observed between term LBW risk and primary PM emitted by on-road gasoline and diesel or by commercial meat cooking sources. Primary PM from wood burning was inversely associated with term LBW. Significant positive associations were also observed between term LBW and ultrafine particle numbers modeled with the line-source roadway dispersion model, traffic density and proximity to roadways. This large study based on complementary exposure metrics suggests that not only primary pollution sources (traffic and commercial meat cooking) but also EC and secondary pollutants are risk factors for term LBW. Copyright © 2016 Elsevier Ltd. All rights reserved.

Several braze filler metals for joining an oxide-dispersion-strengthened nickel-chromium-aluminum alloy

NASA Technical Reports Server (NTRS)

Gyorgak, C. A.

1975-01-01

An evaluation was made of five braze filler metals for joining an aluminum-containing oxide dispersion-strengthened (ODS) alloy, TD-NiCrAl. All five braze filler metals evaluated are considered suitable for joining TD-NiCrAl in terms of wettability and flow. Also, the braze alloys appear to be tolerant of slight variations in brazing procedures since joints prepared by three sources using three of the braze filler metals exhibited similar brazing characteristics and essentially equivalent 1100 C stress-rupture properties in a brazed butt-joint configuration. Recommendations are provided for brazing the aluminum-containing ODS alloys.

Alkali metal/halide thermal energy storage systems performance evaluation

NASA Technical Reports Server (NTRS)

Phillips, W. M.; Stearns, J. W.

1986-01-01

A pseudoheat-pipe heat transfer mechanism has been demonstrated effective in terms of both total heat removal efficiency and rate, on the one hand, and system isothermal characteristics, on the other, for solar thermal energy storage systems of the kind being contemplated for spacecraft. The selection of appropriate salt and alkali metal substances for the system renders it applicable to a wide temperature range. The rapid heat transfer rate obtainable makes possible the placing of the thermal energy storage system around the solar receiver canister, and the immersing of heat transfer fluid tubes in the phase change salt to obtain an isothermal heat source.

Absorbance Based Light Emitting Diode Optical Sensors and Sensing Devices

PubMed Central

O'Toole, Martina; Diamond, Dermot

2008-01-01

The ever increasing demand for in situ monitoring of health, environment and security has created a need for reliable, miniaturised sensing devices. To achieve this, appropriate analytical devices are required that possess operating characteristics of reliability, low power consumption, low cost, autonomous operation capability and compatibility with wireless communications systems. The use of light emitting diodes (LEDs) as light sources is one strategy, which has been successfully applied in chemical sensing. This paper summarises the development and advancement of LED based chemical sensors and sensing devices in terms of their configuration and application, with the focus on transmittance and reflectance absorptiometric measurements. PMID:27879829

Source Term Experiments Project (STEP): Aerosol characterization system

NASA Astrophysics Data System (ADS)

Schlenger, B. J.; Dunn, P. F.

A series of four experiments is being conducted at Argonne National Laboratory's TREAT Reactor. They were designed to provide some of the necessary data regarding magnitude and release rates of fission products from degraded fuel pins, physical and chemical characteristics of released fission products, and aerosol formation and transport phenomena. These are in pile experiments, whereby the test fuel is heated by neutron induced fission and subsequent clad oxidation in steam environments that simulate as closely as practical predicted reactor accident conditions. The test sequences cover a range of pressure and fuel heatup rate, and include the effect of Aq/In/Cd control rod material.

On simulation of local fluxes in molecular junctions

NASA Astrophysics Data System (ADS)

Cabra, Gabriel; Jensen, Anders; Galperin, Michael

2018-05-01

We present a pedagogical review of the current density simulation in molecular junction models indicating its advantages and deficiencies in analysis of local junction transport characteristics. In particular, we argue that current density is a universal tool which provides more information than traditionally simulated bond currents, especially when discussing inelastic processes. However, current density simulations are sensitive to the choice of basis and electronic structure method. We note that while discussing the local current conservation in junctions, one has to account for the source term caused by the open character of the system and intra-molecular interactions. Our considerations are illustrated with numerical simulations of a benzenedithiol molecular junction.

Absorbance Based Light Emitting Diode Optical Sensors and Sensing Devices.

PubMed

O'Toole, Martina; Diamond, Dermot

2008-04-07

The ever increasing demand for in situ monitoring of health, environment and security has created a need for reliable, miniaturised sensing devices. To achieve this, appropriate analytical devices are required that possess operating characteristics of reliability, low power consumption, low cost, autonomous operation capability and compatibility with wireless communications systems. The use of light emitting diodes (LEDs) as light sources is one strategy, which has been successfully applied in chemical sensing. This paper summarises the development and advancement of LED based chemical sensors and sensing devices in terms of their configuration and application, with the focus on transmittance and reflectance absorptiometric measurements.

Prostate Cancer Stem Cells: Viewing Signaling Cascades at a Finer Resolution.

PubMed

Lin, Xiukun; Farooqi, Ammad Ahmad; Qureshi, Muhammad Zahid; Romero, Mirna Azalea; Tabassum, Sobia; Ismail, Muhammad

2016-06-01

It is becoming characteristically more understandable that within tumor cells, there lies a sub-population of tumor cells with "stem cell" like properties and remarkable ability of self-renewal. Many features of these self-renewing cells are comparable with normal stem cells and are termed as "cancer stem cells". Accumulating experimentally verified data has started to scratch the surface of spatio-temporally dysregulated intracellular signaling cascades in the biology of prostate cancer stem cells. We partition this multicomponent review into how different signaling cascades operate in cancer stem cells and how bioactive ingredients isolated from natural sources may modulate signaling network.

High-order scheme for the source-sink term in a one-dimensional water temperature model

PubMed Central

Jing, Zheng; Kang, Ling

2017-01-01

The source-sink term in water temperature models represents the net heat absorbed or released by a water system. This term is very important because it accounts for solar radiation that can significantly affect water temperature, especially in lakes. However, existing numerical methods for discretizing the source-sink term are very simplistic, causing significant deviations between simulation results and measured data. To address this problem, we present a numerical method specific to the source-sink term. A vertical one-dimensional heat conduction equation was chosen to describe water temperature changes. A two-step operator-splitting method was adopted as the numerical solution. In the first step, using the undetermined coefficient method, a high-order scheme was adopted for discretizing the source-sink term. In the second step, the diffusion term was discretized using the Crank-Nicolson scheme. The effectiveness and capability of the numerical method was assessed by performing numerical tests. Then, the proposed numerical method was applied to a simulation of Guozheng Lake (located in central China). The modeling results were in an excellent agreement with measured data. PMID:28264005

High-order scheme for the source-sink term in a one-dimensional water temperature model.

PubMed

Jing, Zheng; Kang, Ling

2017-01-01

The source-sink term in water temperature models represents the net heat absorbed or released by a water system. This term is very important because it accounts for solar radiation that can significantly affect water temperature, especially in lakes. However, existing numerical methods for discretizing the source-sink term are very simplistic, causing significant deviations between simulation results and measured data. To address this problem, we present a numerical method specific to the source-sink term. A vertical one-dimensional heat conduction equation was chosen to describe water temperature changes. A two-step operator-splitting method was adopted as the numerical solution. In the first step, using the undetermined coefficient method, a high-order scheme was adopted for discretizing the source-sink term. In the second step, the diffusion term was discretized using the Crank-Nicolson scheme. The effectiveness and capability of the numerical method was assessed by performing numerical tests. Then, the proposed numerical method was applied to a simulation of Guozheng Lake (located in central China). The modeling results were in an excellent agreement with measured data.

Terraced margins of inflated lava flows on Earth and Mars

NASA Astrophysics Data System (ADS)

Zimbelman, J. R.; Garry, W. B.; Bleacher, J. E.; Crumpler, L. S.

2011-12-01

When fluid basaltic lava flows are emplaced over a shallow regional slope (typically much less than one degree), the lava flows often display impressive characteristics of inflation. Here we describe a distinctive marginal characteristic that is often developed along the margins of endogenously inflated basaltic lava flows; discreet topographic levels of the emplaced lava that are here termed 'terraced margins'. Terraced margins were first noted at the distal end of the Carrizozo lava flow in central New Mexico, where they are particularly well expressed, but terraces have also been observed along some margins of the McCartys lava flow (NM), the distal end of the 1859 Mauna Loa lava flow (HI), and lava flows at Craters of the Moon (ID). Differential Global Positioning System surveys across several terraced margins reveal consistent topographic characteristics: the upper surface of each terrace level is at roughly one half the height of the sheet lobe from which it emerges; when a terrace becomes the source of an additional outbreak, the upper surface of the second terrace is at roughly one half the height of the source terrace; often a subtle topographic depression is present along the contact between a terrace and its source sheet lobe, suggesting that the terrace outflow starts at a level roughly one-third the height of the source lobe; the upper surfaces of both the source sheet lobe and associated terraces are level to within tens of centimeters across length scales of many tens to hundreds of meters, indicative of inflation of all components. The field observations will be used as the constraints for modeling of the inflation and terracing mechanisms, an effort that has only recently started. The multiple imaging data sets now available for Mars have revealed the presence of terraced margins on some lava flows on Mars. Although detailed topographic data are not currently available for the Martian examples identified so far, the presence of terraced margins for lava flows on both Earth and Mars indicates that the terracing mechanism is intimately associated with the lava flow inflation process. This work was supported by grants from the Planetary Geology and Geophysics program of NASA (NNX09AD88G) and the Scholarly Studies program of the Smithsonian Institution.

Effect of Inverter Power Source Characteristics on Welding Stability and Heat Affected Zone Dimensions

NASA Astrophysics Data System (ADS)

Il'yaschenko, D. P.; Chinakhov, D. A.; Mamadaliev, R. A.

2018-01-01

The paper presents results the research in the effect of power sources dynamic characteristics on stability of melting and electrode metal transfer to the weld pool shielded metal arc welding. It is proved that when applying inverter-type welding power sources, heat and mass transfer characteristics change, arc gap short-circuit time and drop generation time are reduced. This leads to reduction of weld pool heat content and contraction of the heat-affected zone by 36% in comparison the same parameters obtained using a diode rectifier.

Source Term Model for Vortex Generator Vanes in a Navier-Stokes Computer Code

NASA Technical Reports Server (NTRS)

Waithe, Kenrick A.

2004-01-01

A source term model for an array of vortex generators was implemented into a non-proprietary Navier-Stokes computer code, OVERFLOW. The source term models the side force created by a vortex generator vane. The model is obtained by introducing a side force to the momentum and energy equations that can adjust its strength automatically based on the local flow. The model was tested and calibrated by comparing data from numerical simulations and experiments of a single low profile vortex generator vane on a flat plate. In addition, the model was compared to experimental data of an S-duct with 22 co-rotating, low profile vortex generators. The source term model allowed a grid reduction of about seventy percent when compared with the numerical simulations performed on a fully gridded vortex generator on a flat plate without adversely affecting the development and capture of the vortex created. The source term model was able to predict the shape and size of the stream-wise vorticity and velocity contours very well when compared with both numerical simulations and experimental data. The peak vorticity and its location were also predicted very well when compared to numerical simulations and experimental data. The circulation predicted by the source term model matches the prediction of the numerical simulation. The source term model predicted the engine fan face distortion and total pressure recovery of the S-duct with 22 co-rotating vortex generators very well. The source term model allows a researcher to quickly investigate different locations of individual or a row of vortex generators. The researcher is able to conduct a preliminary investigation with minimal grid generation and computational time.

A Well-Balanced Path-Integral f-Wave Method for Hyperbolic Problems with Source Terms

PubMed Central

2014-01-01

Systems of hyperbolic partial differential equations with source terms (balance laws) arise in many applications where it is important to compute accurate time-dependent solutions modeling small perturbations of equilibrium solutions in which the source terms balance the hyperbolic part. The f-wave version of the wave-propagation algorithm is one approach, but requires the use of a particular averaged value of the source terms at each cell interface in order to be “well balanced” and exactly maintain steady states. A general approach to choosing this average is developed using the theory of path conservative methods. A scalar advection equation with a decay or growth term is introduced as a model problem for numerical experiments. PMID:24563581

Gay male attraction toward muscular men: does mating context matter?

PubMed

Varangis, Eleanna; Lanzieri, Nicholas; Hildebrandt, Tom; Feldman, Matthew

2012-03-01

The purpose of this study was to examine gay men's perceived attractiveness of male figures based on short-term and long-term partner contexts. A sample of 190 gay adult men rated the attractiveness of line-drawings depicting male figures varying systematically in muscularity and body fat percentage in both short-term and long-term dating contexts. Mixed effects modeling was used to estimate the effects of figure (muscularity and body fat), dating context (short-term vs. long-term), and individual rater characteristics on attractiveness ratings. Results indicated that figure muscularity and body-fat had significant non-linear (i.e., quadratic) relationships with attractiveness ratings, and short-term dating context was associated with more discriminating ratings of attractiveness. Interactions between individual characteristics and figure characteristics indicated that the more available the individual and lower body fat, the more discriminating they were in ratings of attractiveness. The implications for future investigations considering both object and observer characteristics of attractiveness preferences are discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

Long-Term Observation of Small and Medium-Scale Gravity Waves over the Brazilian Equatorial Region

NASA Astrophysics Data System (ADS)

Essien, Patrick; Buriti, Ricardo; Wrasse, Cristiano M.; Medeiros, Amauri; Paulino, Igo; Takahashi, Hisao; Campos, Jose Andre

2016-07-01

This paper reports the long term observations of small and medium-scale gravity waves over Brazilian equatorial region. Coordinated optical and radio measurements were made from OLAP at Sao Joao do Cariri (7.400S, 36.500W) to investigate the occurrences and properties and to characterize the regional mesospheric gravity wave field. All-sky imager measurements were made from the site. for almost 11 consecutive years (September 2000 to November 2010). Most of the waves propagated were characterized as small-scale gravity. The characteristics of the two waves events agreed well with previous gravity wave studies from Brazil and other sites. However, significant differences in the wave propagation headings indicate dissimilar source regions. The observed medium-scale gravity wave events constitute an important new dataset to study their mesospheric properties at equatorial latitudes. These data exhibited similar propagation headings to the short period events, suggesting they originated from the same source regions. It was also observed that some of the medium-scale were capable of propagating into the lower thermosphere where they may have acted directly as seeds for the Rayleigh-Taylor instability development. The wave events were primarily generated by meteorological processes since there was no correlation between the evolution of the wave events and solar cycle F10.7.

Rapid discrimination of Herba Cistanches by multi-step infrared macro-fingerprinting combined with soft independent modeling of class analogy (SIMCA)

NASA Astrophysics Data System (ADS)

Xu, Changhua; Jia, Xiaoguang; Xu, Rong; Wang, Yang; Zhou, Qun; Sun, Suqin

2013-10-01

Herba Cistanche, an important Chinese herbal medicine, has common four species, Cistanche deserticola (CD), Cistanche tubulosa (CT), Cistanche salsa (CS) and Cistanche sinensis (CSN) which have been frequent mixed used. To clarify the sources of Herba Cistanches and ensure the clinical efficacy and safety, a method combing IR macro-fingerprinting with statistical pattern recognition was developed to analyze and discriminate the four species of Herba Cistanche. By comparing FT-IR, second derivative spectral fingerprints via group-peak matching, the similarity to CD and total saccharides (TS) followed an increasing sequence, CT < CSN < CS < CD, whereas that to total glycosides (TG) followed a decreasing order, CT > CSN > CS > CD. Characteristic fingerprints of their 2D-IR correlation spectra in 1750-1000 cm-1 have confirmed the above findings in a more intuitive way. In terms of sources for phenylethanoid glycosides (PhGs), CT can be an ideal alternative species. However, in terms of using them as a whole, more pharmacological study should be conducted due to the different ratios of their chemical constituents, which is also applicable to CSN and CS. Moreover, the four species (179 samples) has been objectively classified by SIMCA based on IR macro-fingerprints.

NEXT GENERATION LEACHING TESTS FOR EVALUATING ...

EPA Pesticide Factsheets

In the U.S. as in other countries, there is increased interest in using industrial by-products as alternative or secondary materials, helping to conserve virgin or raw materials. The LEAF and associated test methods are being used to develop the source term for leaching or any inorganic constituents of potential concern (COPC) in determining what is environmentally acceptable. The leaching test methods include batch equilibrium, percolation column and semi-dynamic mass transport tests for monolithic and compacted granular materials. By testing over a range of values for pH, liquid/solid ratio, and physical form of the material, this approach allows one data set to be used to evaluate a range of management scenarios for a material, representing different environmental conditions (e.g., disposal or beneficial use). The results from these tests may be interpreted individually or integrated to identify a solid material’s characteristic leaching behavior. Furthermore the LEAF approach provides the ability to make meaningful comparisons of leaching between similar and dissimilar materials from national and worldwide origins. To present EPA's research under SHC to implement validated leaching tests referred to as the Leaching Environmental Assessment Framework (LEAF). The primary focus will be on the guidance for implementation of LEAF describing three case studies for developing source terms for evaluating inorganic constituents.

Temporal characteristics of black carbon concentrations and its potential emission sources in a southern Taiwan industrial urban area.

PubMed

Cheng, Yu-Hsiang; Lin, Chi-Chi; Liu, Jyh-Jian; Hsieh, Cheng-Ju

2014-03-01

This study investigates the temporal characteristics of black carbon and its potential emission sources, as well as the fractions of BC in PM2.5 levels in Kaohsiung urban area, which is an industrial city in southern Taiwan. Concentrations of BC and PM2.5 are monitored continuously from March 2006 to February 2010, using an aethalometer and a tapered element oscillating microbalance monitor. Additionally, the presence of organic compounds (or UV enhanced species) in particles at the sampling site is determined using the Delta-C (UVBC-BC) value. According to long-term measurement results, BC and PM2.5 concentrations are 3.33 and 34.0 μg m(-3), respectively, in the Kaohsiung urban area. The ratio of BC/PM2.5 is approximately 11 %. Low concentration of BC and PM2.5 in the summer of this study period is mostly likely owing to meteorological conditions that favored dispersion of local air pollutants. Nevertheless, BC concentrations peaked markedly during morning hours (7:00-11:00), likely owing to local traffic congestion. Measurement results suggest that BC is released from local traffic activities and emitted from industrial activities at this sampling site. Additionally, Delta-C values are significantly higher than zero during January-March and November-December periods in this industrial urban area, implying that UV enhanced species can be observed. At this sampling site, these UV enhanced species do not only originate from household activity and solid waste burning but also release from industrial activities. The elevated Delta-C values during nighttime (18:00-6:00) in the autumn and winter seasons are likely related to those UV enhanced species in the atmosphere, which can be condensed on particle surface under low temperature conditions. According to long-term measurement results, significantly positive Delta-C values can be observed under temperatures <20 °C and relative humidity of 60-75 % in this study. Despite the household activity and solid waste burning, the major sources of particles that are bound with UV enhanced species in this sampling site are industrial parks and a coal-fired power plant.

26 CFR 1.737-1 - Recognition of precontribution gain.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Property A1 and Property A2 is long-term, U.S.-source capital gain or loss. The character of gain on Property A3 is long-term, foreign-source capital gain. B contributes Property B, nondepreciable real... long-term, U.S.-source capital gain ($10,000 gain on Property A1 and $8,000 loss on Property A2) and $1...

Source term model evaluations for the low-level waste facility performance assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yim, M.S.; Su, S.I.

1995-12-31

The estimation of release of radionuclides from various waste forms to the bottom boundary of the waste disposal facility (source term) is one of the most important aspects of LLW facility performance assessment. In this work, several currently used source term models are comparatively evaluated for the release of carbon-14 based on a test case problem. The models compared include PRESTO-EPA-CPG, IMPACTS, DUST and NEFTRAN-II. Major differences in assumptions and approaches between the models are described and key parameters are identified through sensitivity analysis. The source term results from different models are compared and other concerns or suggestions are discussed.

Pre-treatments, characteristics, and biogeochemical dynamics of dissolved organic matter in sediments: A review.

PubMed

Chen, Meilian; Hur, Jin

2015-08-01

Dissolved organic matter (DOM) in sediments, termed here sediment DOM, plays a variety of important roles in global biogeochemical cycling of carbon and nutrients as well as in the fate and transport of xenobiotics. Here we reviewed sediment DOM, including pore waters and water extractable organic matter from inland and coastal sediments, based on recent literature (from 1996 to 2014). Sampling, pre-treatment, and characterization methods for sediment DOM were summarized. The characteristics of sediment DOM have been compared along an inland to coastal ecosystems gradient and also with the overlying DOM in water column to distinguish the unique nature of it. Dissolved organic carbon (DOC) from inland sediment DOM was generally higher than coastal areas, while no notable differences were found for their aromaticity and apparent molecular weight. Fluorescence index (FI) revealed that mixed sources are dominant for inland sediment DOM, but marine end-member prevails for coastal sediment DOM. Many reports showed that sediments operate as a net source of DOC and chromophoric DOM (CDOM) to the water column. Sediment DOM has shown more enrichment of nitrogen- and sulfur-containing compounds in the elemental signature than the overlying DOM. Fluorescent fingerprint investigated by excitation-emission matrix coupled with parallel factor analysis (EEM-PARAFAC) further demonstrated the characteristics of sediment DOM lacking in the photo-oxidized and the intermediate components, which are typically present in the overlying surface water. In addition, the biogeochemical changes in sediment DOM and the subsequent environmental implications were discussed with the focus on the binding and the complexation properties with pollutants. Copyright © 2015 Elsevier Ltd. All rights reserved.

Observation-based source terms in the third-generation wave model WAVEWATCH

NASA Astrophysics Data System (ADS)

Zieger, Stefan; Babanin, Alexander V.; Erick Rogers, W.; Young, Ian R.

2015-12-01

Measurements collected during the AUSWEX field campaign, at Lake George (Australia), resulted in new insights into the processes of wind wave interaction and whitecapping dissipation, and consequently new parameterizations of the input and dissipation source terms. The new nonlinear wind input term developed accounts for dependence of the growth on wave steepness, airflow separation, and for negative growth rate under adverse winds. The new dissipation terms feature the inherent breaking term, a cumulative dissipation term and a term due to production of turbulence by waves, which is particularly relevant for decaying seas and for swell. The latter is consistent with the observed decay rate of ocean swell. This paper describes these source terms implemented in WAVEWATCH III ®and evaluates the performance against existing source terms in academic duration-limited tests, against buoy measurements for windsea-dominated conditions, under conditions of extreme wind forcing (Hurricane Katrina), and against altimeter data in global hindcasts. Results show agreement by means of growth curves as well as integral and spectral parameters in the simulations and hindcast.

Short-term cessation of sex work and injection drug use: evidence from a recurrent event survival analysis.

PubMed

Gaines, Tommi L; Urada, Lianne A; Martinez, Gustavo; Goldenberg, Shira M; Rangel, Gudelia; Reed, Elizabeth; Patterson, Thomas L; Strathdee, Steffanie A

2015-06-01

This study quantitatively examined the prevalence and correlates of short-term sex work cessation among female sex workers who inject drugs (FSW-IDUs) and determined whether injection drug use was independently associated with cessation. We used data from FSW-IDUs (n=467) enrolled into an intervention designed to increase condom use and decrease sharing of injection equipment but was not designed to promote sex work cessation. We applied a survival analysis that accounted for quit-re-entry patterns of sex work over 1-year stratified by city, Tijuana and Ciudad Juarez, Mexico. Overall, 55% of participants stopped sex work at least once during follow-up. Controlling for other characteristics and intervention assignment, injection drug use was inversely associated with short-term sex work cessation in both cities. In Ciudad Juarez, women receiving drug treatment during follow-up had a 2-fold increase in the hazard of stopping sex work. In both cities, income from sources other than sex work, police interactions and healthcare access were independently and significantly associated with shorter-term cessation. Short-term sex work cessation was significantly affected by injection drug use. Expanded drug treatment and counseling coupled with supportive services such as relapse prevention, job training, and provision of alternate employment opportunities may promote longer-term cessation among women motivated to leave the sex industry. Copyright © 2015 Elsevier Ltd. All rights reserved.

Diabetic Macular Edema: What is Focal and What is Diffuse?

PubMed Central

Browning, David J.; Altaweel, Michael M.; Bressler, Neil M.; Bressler, Susan B.; Scott, Ingrid U.

2009-01-01

Purpose To review the available information on classification of diabetic macular edema (DME) as focal or diffuse. Design Interpretive essay. Methods Literature review and interpretation. Results The terms focal and diffuse diabetic macular edema are frequently used without clear definitions. Published definitions often use different examination modalities and are often inconsistent. Evaluating published information on prevalence of focal and diffuse DME, response of focal and diffuse DME to treatments, and importance of focal and diffuse DME in assessing prognosis is hindered because the terms are inconsistently employed. A newer vocabulary may be more constructive, one that describes discrete components of the concepts such as extent and location of macular thickening, involvement of the center of the macula, quantity and pattern of lipid exudates, source of fluorescein leakage, and regional variation in macular thickening, and that distinguishes these terms from the use of the term focal when describing one type of photocoagulation technique. Developing methods for assessing component variables that can be used in clinical practice and establishing reproducibility of the methods will be important tasks. Conclusion Little evidence exists that characteristics of DME described by the terms focal and diffuse help to explain variation in visual acuity or response to treatment. It is unresolved whether a concept of focal and diffuse DME will prove clinically useful despite frequent usage of the terms when describing management of DME. Further studies to address the issues are needed. PMID:18774122

Short-Term Cessation of Sex Work and Injection Drug Use: Evidence from a Recurrent Event Survival Analysis

PubMed Central

Gaines, Tommi L.; Urada, Lianne; Martinez, Gustavo; Goldenberg, Shira M.; Rangel, Gudelia; Reed, Elizabeth; Patterson, Thomas L.; Strathdee, Steffanie A.

2015-01-01

Objective This study quantitatively examined the prevalence and correlates of short-term sex work cessation among female sex workers who inject drugs (FSW-IDUs) and determined whether injection drug use was independently associated with cessation. Methods We used data from FSW-IDUs (n=467) enrolled into an intervention designed to increase condom use and decrease sharing of injection equipment but was not designed to promote sex work cessation. We applied a survival analysis that accounted for quit-re-entry patterns of sex work over 1-year stratified by city, Tijuana and Ciudad Juarez, Mexico. Results Overall, 55% of participants stopped sex work at least once during follow-up. Controlling for other characteristics and intervention assignment, injection drug use was inversely associated with short-term sex work cessation in both cities. In Ciudad Juarez, women receiving drug treatment during follow-up had a 2-fold increase in the hazard of stopping sex work. In both cities, income from sources other than sex work, police interactions and healthcare access were independently and significantly associated with shorter-term cessation. Conclusions Short-term sex work cessation was significantly affected by injection drug use. Expanded drug treatment and counseling coupled with supportive services such as relapse prevention, job training, and provision of alternate employment opportunities may promote longer-term cessation among women motivated to leave the sex industry. PMID:25644589

When is a Tsunami a Mega-Tsunami?

NASA Astrophysics Data System (ADS)

Chague-Goff, C.; Goff, J. R.; Terry, J. P.; Goto, K.

2014-12-01

The 2004 Indian Ocean Tsunami is commonly called a mega-tsunami, and this attribute has also been linked to the 2011 Tohoku-oki tsunami. However, since this term was first coined in the early 1990's there have been very few attempts to define it. As such it has been applied in a rather arbitrary fashion to a number of tsunami characteristics, such as wave height or amplitude at both the source and at distant locations, run-up height, geographical extent and impact. The first use of the term is related to a tsunami generated by a large bolide impact and indeed it seems entirely appropriate that the term should be used for such rare events on geological timescales. However, probably as a result of media-driven hyperbole, scientists have used this term at least twice in the last decade, which is hardly a significant portion of the geological timescale. It therefore seems reasonable to suggest that these recent unexpectedly large events do not fall in the category of mega-tsunami but into a category of exceptional events within historical experience and local perspective. The use of the term mega-tsunami over the past 14 years is discussed and a definition is provided that marks the relative uniqueness of these events and a new term, appropriately Japanese in origin, namely that of souteigai-tsunami, is proposed. Examples of these tsunamis will be provided.

Characterisation of exposure to non-ionising electromagnetic fields in the Spanish INMA birth cohort: study protocol.

PubMed

Gallastegi, Mara; Guxens, Mònica; Jiménez-Zabala, Ana; Calvente, Irene; Fernández, Marta; Birks, Laura; Struchen, Benjamin; Vrijheid, Martine; Estarlich, Marisa; Fernández, Mariana F; Torrent, Maties; Ballester, Ferrán; Aurrekoetxea, Juan J; Ibarluzea, Jesús; Guerra, David; González, Julián; Röösli, Martin; Santa-Marina, Loreto

2016-02-18

Analysis of the association between exposure to electromagnetic fields of non-ionising radiation (EMF-NIR) and health in children and adolescents is hindered by the limited availability of data, mainly due to the difficulties on the exposure assessment. This study protocol describes the methodologies used for characterising exposure of children to EMF-NIR in the INMA (INfancia y Medio Ambiente- Environment and Childhood) Project, a prospective cohort study. Indirect (proximity to emission sources, questionnaires on sources use and geospatial propagation models) and direct methods (spot and fixed longer-term measurements and personal measurements) were conducted in order to assess exposure levels of study participants aged between 7 and 18 years old. The methodology used varies depending on the frequency of the EMF-NIR and the environment (homes, schools and parks). Questionnaires assessed the use of sources contributing both to Extremely Low Frequency (ELF) and Radiofrequency (RF) exposure levels. Geospatial propagation models (NISMap) are implemented and validated for environmental outdoor sources of RFs using spot measurements. Spot and fixed longer-term ELF and RF measurements were done in the environments where children spend most of the time. Moreover, personal measurements were taken in order to assess individual exposure to RF. The exposure data are used to explore their relationships with proximity and/or use of EMF-NIR sources. Characterisation of the EMF-NIR exposure by this combination of methods is intended to overcome problems encountered in other research. The assessment of exposure of INMA cohort children and adolescents living in different regions of Spain to the full frequency range of EMF-NIR extends the characterisation of environmental exposures in this cohort. Together with other data obtained in the project, on socioeconomic and family characteristics and development of the children and adolescents, this will enable to evaluate the complex interaction between health outcomes in children and adolescents and the various environmental factors that surround them.

A robust hidden Markov Gauss mixture vector quantizer for a noisy source.

PubMed

Pyun, Kyungsuk Peter; Lim, Johan; Gray, Robert M

2009-07-01

Noise is ubiquitous in real life and changes image acquisition, communication, and processing characteristics in an uncontrolled manner. Gaussian noise and Salt and Pepper noise, in particular, are prevalent in noisy communication channels, camera and scanner sensors, and medical MRI images. It is not unusual for highly sophisticated image processing algorithms developed for clean images to malfunction when used on noisy images. For example, hidden Markov Gauss mixture models (HMGMM) have been shown to perform well in image segmentation applications, but they are quite sensitive to image noise. We propose a modified HMGMM procedure specifically designed to improve performance in the presence of noise. The key feature of the proposed procedure is the adjustment of covariance matrices in Gauss mixture vector quantizer codebooks to minimize an overall minimum discrimination information distortion (MDI). In adjusting covariance matrices, we expand or shrink their elements based on the noisy image. While most results reported in the literature assume a particular noise type, we propose a framework without assuming particular noise characteristics. Without denoising the corrupted source, we apply our method directly to the segmentation of noisy sources. We apply the proposed procedure to the segmentation of aerial images with Salt and Pepper noise and with independent Gaussian noise, and we compare our results with those of the median filter restoration method and the blind deconvolution-based method, respectively. We show that our procedure has better performance than image restoration-based techniques and closely matches to the performance of HMGMM for clean images in terms of both visual segmentation results and error rate.

HOW GAS-DYNAMIC FLARE MODELS POWERED BY PETSCHEK RECONNECTION DIFFER FROM THOSE WITH AD HOC ENERGY SOURCES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Longcope, D. W.; Klimchuk, J. A.

Aspects of solar flare dynamics, such as chromospheric evaporation and flare light curves, have long been studied using one-dimensional models of plasma dynamics inside a static flare loop, subjected to some energy input. While extremely successful at explaining the observed characteristics of flares, all such models so far have specified energy input ad hoc, rather than deriving it self-consistently. There is broad consensus that flares are powered by magnetic energy released through reconnection. Recent work has generalized Petschek’s basic reconnection scenario, topological change followed by field line retraction and shock heating, to permit its inclusion in a one-dimensional flare loop model. Heremore » we compare the gas dynamics driven by retraction and shocking to those from more conventional static loop models energized by ad hoc source terms. We find significant differences during the first minute, when retraction leads to larger kinetic energies and produces higher densities at the loop top, while ad hoc heating tends to rarify the loop top. The loop-top density concentration is related to the slow magnetosonic shock, characteristic of Petschek’s model, but persists beyond the retraction phase occurring in the outflow jet. This offers an explanation for observed loop-top sources of X-ray and EUV emission, with advantages over that provided by ad hoc heating scenarios. The cooling phases of the two models are, however, notably similar to one another, suggesting that observations at that stage will yield little information on the nature of energy input.« less

Changes to indoor air quality as a result of relocating families from slums to public housing

NASA Astrophysics Data System (ADS)

Burgos, Soledad; Ruiz, Pablo; Koifman, Rosalina

2013-05-01

One largely unstudied benefit of relocating families from slums to public housing is the potential improvement in indoor air quality (IAQ). We compared families that moved from slums to public housing with those that remained living in slums in Santiago, Chile in terms of fine particulate matter (PM2.5) as main indicator of change. A cross-sectional study of 98 relocated families and 71 still living in slums was carried out, obtaining indoor and outdoor samples by a Personal Environmental Monitor. Home characteristics, including indoor air pollution sources were collected through questionnaires. Multivariate regression models included the intervention (public housing or slum), indoor pollution sources, outdoor PM2.5 and family characteristics as predictors. Indoor PM2.5 concentrations were higher in slums (77.8 μg m-3 [SD = 35.7 μg m-3]) than in public housing (55.7 μg m-3 [SD = 34.6 μg m-3], p < 0.001). Differences between indoor and outdoor PM2.5 were significant only in the slum houses. The multivariate analysis showed that housing intervention significantly decreased indoor PM2.5 (10.4 μg m-3) after adjusting by the other predictors. Outdoor PM2.5 was the main predictor of indoor PM2.5. Other significant factors were water heating fuels and indoor smoking. Having infants 1-23 months was associated with a lowering of indoor PM2.5. Our results suggest that a public housing program that moves families from slums to public housing improves indoor air quality directly and also indirectly through air pollution sources.

Acoustic characteristics of underwater tail slaps used by Norwegian and Icelandic killer whales (Orcinus orca) to debilitate herring (Clupea harengus).

PubMed

Simon, Malene; Wahlberg, Magnus; Ugarte, Fernando; Miller, Lee A

2005-06-01

Norwegian killer whales debilitate prey by slapping their tails into herring schools. These underwater tail slaps produce a thud-like sound. It is unclear whether this sound is caused by cavitation and/or physical contact between herring and whale tail. Also the forces causing debilitation of the fish are not understood. Here we present an acoustic analysis of underwater tail slaps using a multi-channel wide (150 kHz) band recording system. Underwater tail slaps produced by Norwegian killer whales generated sounds consisting of multiple pulses with source levels of 186+/-5.4 dB (pp) re.1 microPa at 1 m (+/-1 s.d., N = 4). The -3 dB and 97% energy bandwidths were 36.8+/-22.5 kHz and 130.5+/-17.5 kHz (+/-1 s.d., N = 13), respectively, with a centre frequency of 46.1+/-22.3 kHz. The similarities between the acoustic properties of underwater tail slaps recorded from killer whales in Norway, and thud-like sounds recorded from killer whales in Iceland suggest that Norwegian and Icelandic killer whales use similar hunting techniques. The acoustic characteristics of sounds produced by underwater tail slaps were similar to the ones from other cavitation sound sources described in the literature, both in term of temporal and frequency features as well as in source level. We suggest that multiple factors generated by the tail slaps like particle fluctuations, turbulence, pressure changes and physical impact cause debilitation of herring.

Simplified contaminant source depletion models as analogs of multiphase simulators

NASA Astrophysics Data System (ADS)

Basu, Nandita B.; Fure, Adrian D.; Jawitz, James W.

2008-04-01

Four simplified dense non-aqueous phase liquid (DNAPL) source depletion models recently introduced in the literature are evaluated for the prediction of long-term effects of source depletion under natural gradient flow. These models are simple in form (a power function equation is an example) but are shown here to serve as mathematical analogs to complex multiphase flow and transport simulators. The spill and subsequent dissolution of DNAPLs was simulated in domains having different hydrologic characteristics (variance of the log conductivity field = 0.2, 1 and 3) using the multiphase flow and transport simulator UTCHEM. The dissolution profiles were fitted using four analytical models: the equilibrium streamtube model (ESM), the advection dispersion model (ADM), the power law model (PLM) and the Damkohler number model (DaM). All four models, though very different in their conceptualization, include two basic parameters that describe the mean DNAPL mass and the joint variability in the velocity and DNAPL distributions. The variability parameter was observed to be strongly correlated with the variance of the log conductivity field in the ESM and ADM but weakly correlated in the PLM and DaM. The DaM also includes a third parameter that describes the effect of rate-limited dissolution, but here this parameter was held constant as the numerical simulations were found to be insensitive to local-scale mass transfer. All four models were able to emulate the characteristics of the dissolution profiles generated from the complex numerical simulator, but the one-parameter PLM fits were the poorest, especially for the low heterogeneity case.

Simplified contaminant source depletion models as analogs of multiphase simulators.

PubMed

Basu, Nandita B; Fure, Adrian D; Jawitz, James W

2008-04-28

Four simplified dense non-aqueous phase liquid (DNAPL) source depletion models recently introduced in the literature are evaluated for the prediction of long-term effects of source depletion under natural gradient flow. These models are simple in form (a power function equation is an example) but are shown here to serve as mathematical analogs to complex multiphase flow and transport simulators. The spill and subsequent dissolution of DNAPLs was simulated in domains having different hydrologic characteristics (variance of the log conductivity field=0.2, 1 and 3) using the multiphase flow and transport simulator UTCHEM. The dissolution profiles were fitted using four analytical models: the equilibrium streamtube model (ESM), the advection dispersion model (ADM), the power law model (PLM) and the Damkohler number model (DaM). All four models, though very different in their conceptualization, include two basic parameters that describe the mean DNAPL mass and the joint variability in the velocity and DNAPL distributions. The variability parameter was observed to be strongly correlated with the variance of the log conductivity field in the ESM and ADM but weakly correlated in the PLM and DaM. The DaM also includes a third parameter that describes the effect of rate-limited dissolution, but here this parameter was held constant as the numerical simulations were found to be insensitive to local-scale mass transfer. All four models were able to emulate the characteristics of the dissolution profiles generated from the complex numerical simulator, but the one-parameter PLM fits were the poorest, especially for the low heterogeneity case.

Bayesian source term determination with unknown covariance of measurements

NASA Astrophysics Data System (ADS)

Belal, Alkomiet; Tichý, Ondřej; Šmídl, Václav

2017-04-01

Determination of a source term of release of a hazardous material into the atmosphere is a very important task for emergency response. We are concerned with the problem of estimation of the source term in the conventional linear inverse problem, y = Mx, where the relationship between the vector of observations y is described using the source-receptor-sensitivity (SRS) matrix M and the unknown source term x. Since the system is typically ill-conditioned, the problem is recast as an optimization problem minR,B(y - Mx)TR-1(y - Mx) + xTB-1x. The first term minimizes the error of the measurements with covariance matrix R, and the second term is a regularization of the source term. There are different types of regularization arising for different choices of matrices R and B, for example, Tikhonov regularization assumes covariance matrix B as the identity matrix multiplied by scalar parameter. In this contribution, we adopt a Bayesian approach to make inference on the unknown source term x as well as unknown R and B. We assume prior on x to be a Gaussian with zero mean and unknown diagonal covariance matrix B. The covariance matrix of the likelihood R is also unknown. We consider two potential choices of the structure of the matrix R. First is the diagonal matrix and the second is a locally correlated structure using information on topology of the measuring network. Since the inference of the model is intractable, iterative variational Bayes algorithm is used for simultaneous estimation of all model parameters. The practical usefulness of our contribution is demonstrated on an application of the resulting algorithm to real data from the European Tracer Experiment (ETEX). This research is supported by EEA/Norwegian Financial Mechanism under project MSMT-28477/2014 Source-Term Determination of Radionuclide Releases by Inverse Atmospheric Dispersion Modelling (STRADI).

Source Term Model for Steady Micro Jets in a Navier-Stokes Computer Code

NASA Technical Reports Server (NTRS)

Waithe, Kenrick A.

2005-01-01

A source term model for steady micro jets was implemented into a non-proprietary Navier-Stokes computer code, OVERFLOW. The source term models the mass flow and momentum created by a steady blowing micro jet. The model is obtained by adding the momentum and mass flow created by the jet to the Navier-Stokes equations. The model was tested by comparing with data from numerical simulations of a single, steady micro jet on a flat plate in two and three dimensions. The source term model predicted the velocity distribution well compared to the two-dimensional plate using a steady mass flow boundary condition, which was used to simulate a steady micro jet. The model was also compared to two three-dimensional flat plate cases using a steady mass flow boundary condition to simulate a steady micro jet. The three-dimensional comparison included a case with a grid generated to capture the circular shape of the jet and a case without a grid generated for the micro jet. The case without the jet grid mimics the application of the source term. The source term model compared well with both of the three-dimensional cases. Comparisons of velocity distribution were made before and after the jet and Mach and vorticity contours were examined. The source term model allows a researcher to quickly investigate different locations of individual or several steady micro jets. The researcher is able to conduct a preliminary investigation with minimal grid generation and computational time.

Novel bidirectional DC-DC converters based on the three-state switching cell

NASA Astrophysics Data System (ADS)

da Silva Júnior, José Carlos; Robles Balestero, Juan Paulo; Lessa Tofoli, Fernando

2016-05-01

It is well known that there is an increasing demand for bidirectional DC-DC converters for applications that range from renewable energy sources to electric vehicles. Within this context, this work proposes novel DC-DC converter topologies that use the three-state switching cell (3SSC), whose well-known advantages over conventional existing structures are ability to operate at high current levels, while current sharing is maintained by a high frequency transformer; reduction of cost and dimensions of magnetics; improved distribution of losses, with consequent increase of global efficiency and reduction of cost associated to the need of semiconductors with lower current ratings. Three distinct topologies can be derived from the 3SSC: one DC-DC converter with reversible current characteristic able to operate in the first and second quadrants; one DC-DC converter with reversible voltage characteristic able to operate in the first and third quadrants and one DC-DC converter with reversible current and voltage characteristics able to operate in four quadrants. Only the topology with bidirectional current characteristic is analysed in detail in terms of the operating stages in both nonoverlapping and overlapping modes, while the design procedure of the power stage elements is obtained. In order to validate the theoretical assumptions, an experimental prototype is also implemented, so that relevant issues can be properly discussed.

Recruitment rates in workplace physical activity interventions: characteristics for success.

PubMed

Ryde, Gemma C; Gilson, Nicholas D; Burton, Nicola W; Brown, Wendy J

2013-01-01

To conduct a systematic review to assess recruitment rates in workplace physical activity (PA) intervention studies and describe characteristics of studies with high recruitment rates. Data Source. Electronic and manual searches were conducted. Workplace PA intervention studies that reported the number of employees invited to participate and the number who responded were included. Studies with recruitment rates of ≥70% were categorized as high with the remaining studies (<70%) used as comparison. Key study characteristics were assessed. An approach called positive deviance was used to identify the extent to which study characteristics were unique to high recruitment rate. Seventy-six percent of studies failed to report recruitment rates (n = 30 included for review). Studies with high recruitment rates (n = 8) tended to have longer study duration (mean 1.6 years) and target smaller cohorts of employees (mean n = 199) than comparison studies (3.9 months; n = 1241). For recruitment strategies and intervention components of high studies, involvement of employees was driven by the organization, with PA interventions provided as part of the working day in paid time. These findings suggest a potential to improve recruitment through targeting small cohorts of employees, incorporating PA as a long-term strategy, facilitating organizationally driven employee involvement, and providing PA interventions during paid time.

Effects of Different Spectral Shapes and Amplitude Modulation of Broadband Noise on Annoyance Reactions in a Controlled Listening Experiment.

PubMed

Schäffer, Beat; Pieren, Reto; Schlittmeier, Sabine J; Brink, Mark

2018-05-19

Environmental noise from transportation or industrial infrastructure typically has a broad frequency range. Different sources may have disparate acoustical characteristics, which may in turn affect noise annoyance. However, knowledge of the relative contribution of the different acoustical characteristics of broadband noise to annoyance is still scarce. In this study, the subjectively perceived short-term (acute) annoyance reactions to different broadband sounds (namely, realistic outdoor wind turbine and artificial, generic sounds) at 40 dBA were investigated in a controlled laboratory listening experiment. Combined with the factorial design of the experiment, the sounds allowed for separation of the effects of three acoustical characteristics on annoyance, namely, spectral shape, depth of periodic amplitude modulation (AM), and occurrence (or absence) of random AM. Fifty-two participants rated their annoyance with the sounds. Annoyance increased with increasing energy content in the low-frequency range as well as with depth of periodic AM, and was higher in situations with random AM than without. Similar annoyance changes would be evoked by sound pressure level changes of up to 8 dB. The results suggest that besides standard sound pressure level metrics, other acoustical characteristics of (broadband) noise should also be considered in environmental impact assessments, e.g., in the context of wind turbine installations.

Green materials for sustainable development

NASA Astrophysics Data System (ADS)

Purwasasmita, B. S.

2017-03-01

Sustainable development is an integrity of multidiscipline concept combining ecological, social and economic aspects to construct a liveable human living system. The sustainable development can be support through the development of green materials. Green materials offers a unique characteristic and properties including abundant in nature, less toxic, economically affordable and versatility in term of physical and chemical properties. Green materials can be applied for a numerous field in science and technology applications including for energy, building, construction and infrastructures, materials science and engineering applications and pollution management and technology. For instance, green materials can be developed as a source for energy production. Green materials including biomass-based source can be developed as a source for biodiesel and bioethanol production. Biomass-based materials also can be transformed into advanced functionalized materials for advanced bio-applications such as the transformation of chitin into chitosan which further used for biomedicine, biomaterials and tissue engineering applications. Recently, cellulose-based material and lignocellulose-based materials as a source for the developing functional materials attracted the potential prospect for biomaterials, reinforcing materials and nanotechnology. Furthermore, the development of pigment materials has gaining interest by using the green materials as a source due to their unique properties. Eventually, Indonesia as a large country with a large biodiversity can enhance the development of green material to strengthen our nation competitiveness and develop the materials technology for the future.

Source apportionment and a novel approach of estimating regional contributions to ambient PM2.5 in Haikou, China.

PubMed

Liu, Baoshuang; Li, Tingkun; Yang, Jiamei; Wu, Jianhui; Wang, Jiao; Gao, Jixin; Bi, Xiaohui; Feng, Yinchang; Zhang, Yufen; Yang, Haihang

2017-04-01

A novel approach was developed to estimate regional contributions to ambient PM 2.5 in Haikou, China. In this paper, the investigation was divided into two main steps. The first step: analysing the characteristics of the chemical compositions of ambient PM 2.5 , as well as the source profiles, and then conducting source apportionments by using the CMB and CMB-Iteration models. The second step: the development of estimation approaches for regional contributions in terms of local features of Haikou and the results of source apportionment, and estimating regional contributions to ambient PM 2.5 in Haikou by this new approach. The results indicate that secondary sulphate, resuspended dust and vehicle exhaust were the major sources of ambient PM 2.5 in Haikou, contributing 9.9-21.4%, 10.1-19.0% and 10.5-20.2%, respectively. Regional contributions to ambient PM 2.5 in Haikou in spring, autumn and winter were 22.5%, 11.6% and 32.5%, respectively. The regional contribution in summer was assumed to be zero according to the better atmospheric quality and assumptions of this new estimation approach. The higher regional contribution in winter might be mainly attributable to the transport of polluted air originating in mainland China, especially from the north, where coal is burned for heating in winter. Copyright © 2017 Elsevier Ltd. All rights reserved.

Balancing practicality and hydrologic realism: a parsimonious approach for simulating rapid groundwater recharge via unsaturated-zone preferential flow

USGS Publications Warehouse

Mirus, Benjamin B.; Nimmo, J.R.

2013-01-01

The impact of preferential flow on recharge and contaminant transport poses a considerable challenge to water-resources management. Typical hydrologic models require extensive site characterization, but can underestimate fluxes when preferential flow is significant. A recently developed source-responsive model incorporates film-flow theory with conservation of mass to estimate unsaturated-zone preferential fluxes with readily available data. The term source-responsive describes the sensitivity of preferential flow in response to water availability at the source of input. We present the first rigorous tests of a parsimonious formulation for simulating water table fluctuations using two case studies, both in arid regions with thick unsaturated zones of fractured volcanic rock. Diffuse flow theory cannot adequately capture the observed water table responses at both sites; the source-responsive model is a viable alternative. We treat the active area fraction of preferential flow paths as a scaled function of water inputs at the land surface then calibrate the macropore density to fit observed water table rises. Unlike previous applications, we allow the characteristic film-flow velocity to vary, reflecting the lag time between source and deep water table responses. Analysis of model performance and parameter sensitivity for the two case studies underscores the importance of identifying thresholds for initiation of film flow in unsaturated rocks, and suggests that this parsimonious approach is potentially of great practical value.

The "Overdrive" Mode in the "Complete Vocal Technique": A Preliminary Study.

PubMed

Sundberg, Johan; Bitelli, Maddalena; Holmberg, Annika; Laaksonen, Ville

2017-09-01

"Complete Vocal Technique," or CVT, is an internationally widespread method for teaching voice. It classifies voicing into four types, referred to as "vocal modes," one of which is called "Overdrive." The physiological correlates of these types are unclear. This study presents an attempt to analyze its voice source and formant frequency characteristics. A male and a female expert of CVT sang a set of "Overdrive" and falsetto tones on the syllable /pᴂ/. The voice source could be analyzed by inverse filtering in the case of the male subject. Results showed that subglottal pressure, measured as the oral pressure during /p/ occlusion, was low in falsetto and high in "Overdrive", and it was strongly correlated with each of the voice source parameters. These correlations could be described in terms of equations. The deviations from these equations of the different voice source parameters for the various voice samples suggested that "Overdrive" phonation was produced with stronger vocal fold adduction than the falsetto tones. Further, the subject was also found to tune the first formant to the second partial in "Overdrive" tones. The results support the conclusion that the method used, to compensate for the influence of subglottal pressure on the voice source, seems promising to use for analyses of other CVT vocal modes and also for other types of phonation. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Establishing aeolian particulate 'fingerprints' in an airport environment using magnetic measurements and SEM/EDAX

NASA Astrophysics Data System (ADS)

Jones, Sue; Hoon, Stephen R.; Richardson, Nigel; Bennett, Michael

2016-04-01

The significant increase in global air travel which has occurred during the last fifty years has generated growing concern regarding the potential impacts associated with increasing emissions of particulate matter (PM) from aviation activity on health and the environment. PM within the airport environment, in particular, may be derived from a wide range of potential sources including aircraft; vehicles; ground support equipment and buildings. In order to investigate and remediate potential problem sources, it is important to be able to identify characteristic particulate 'fingerprints' which would allow source attribution, particularly respirable particulates. To date the identification of such 'fingerprints' has remained elusive but remains a key research priority for the aviation industry (Webb et al, 2008). In previous PM studies, environmental magnetism has been used as a successful technique for discriminating between different emission types and particulate sources in both urban and industrial environments (e.g. Hunt et al 1984; Lecoanet et al 2003, Jones et al 2015). Environmental magnetism is a non-destructive and relatively rapid technique involving the use of non-directional, rock magnetic measurements to characterise the mineral magnetic properties of natural and anthropogenic materials. In other studies scanning electron microscopy (SEM) has also been used as an effective characterisation technique for the investigation of grain size and morphology of PM derived from vehicle emissions (e.g. Bucko et al 2010) and fossil fuel combustion sources (Kim et al 2009). In this study, environmental magnetic measurements and SEM/EDAX have been used to characterise dusts from specific aircraft sources including engines, brakes and tyres. Furthermore, these methods have also been applied to runway (both hard and grass covered surfaces), taxiway and apron dusts collected during extensive environmental sampling at Manchester International Airport, UK in order to investigate source attribution. The results indicate that the dusts collected from the various aircraft sources (i.e. engines, brakes and tyres) are significantly different in terms of magnetic mineral type and grain size. Furthermore, particulates deposited at different locations on the runway surface show significant differentiation in magnetic grain size and mineralogy which when compared with the results from the different aircraft sources suggest that they may relate to emissions from different sources at various stages of the take/off landing cycle. Results of SEM/EDAX analysis show that aircraft engine, brake and tyre dust particulates vary significantly in terms of morphology and chemical composition. All sources include respirable (sub 10 micron) particulates. Engine dusts are carbon and silicon rich dominated by angular particulates. They have a distinctive chemical composition including Chromium, Cobalt and Nickel. Tyre dusts are predominantly carbon based dominated by spherical particulates and a unique presence of Zinc. Brake dusts, carbon and oxygen dominated and trace metals, include sub-angular particulates but an absence of the characteristic engine and tyre dusts metals. By combining SEM/EDAX measurements and magnetic measurements we are establishing potential fingerprints for particulates from ground based air transport activities to enable identification of potential health hazards. This will help inform management plans for reduction of associated risks to the environment and health. References Bucko, M., Magiera, T., Pesonen, L., Janus, B. (2010) 'Magnetic, geochemical and microstructural characteristics of road dust on roadsides with different traffic volumes - Case study from Finland' Water, Air and Soil Pollution 209, pp. 295-306. Hunt, A., Jones, J. and Oldfield, F. (1984) 'Magnetic measurements and heavy metals in atmospheric particulates of anthropogenic origin' The Science of the Total Environment 33, 129-139. Jones, S., Richardson, N., Bennett, M. and Hoon, S.R. (2015) The application of magnetic measurements for the characterization of atmospheric particulate pollution within the airport environment. Science of the Total Environment., 502 pp.385-390 Kim, W., Doh, S., Yu, Y. (2009) 'Anthropogenic contribution of magnetic particulates in urban roadside dust' Atmospheric Environment 43 (19) pp.3137-3144. Lecoanet, H., Leveque, F. and Ambrosi, J.P. (2003) 'Combination of magnetic parameters: an efficient way to discriminate soil-contamination sources (south France)' Environmental Pollution 122, 229-234. Webb, S., Whitefield, P.D., Miake-Lye, R.C., Timko, M.T. and Thrasher, T.G. (2008) 'ACRP Report 6: Research needs associated with particulate emissions at airports'. Transportation Research Board'.

A model to predict disease progression in patients with autosomal dominant polycystic kidney disease (ADPKD): the ADPKD Outcomes Model.

PubMed

McEwan, Phil; Bennett Wilton, Hayley; Ong, Albert C M; Ørskov, Bjarne; Sandford, Richard; Scolari, Francesco; Cabrera, Maria-Cristina V; Walz, Gerd; O'Reilly, Karl; Robinson, Paul

2018-02-13

Autosomal dominant polycystic kidney disease (ADPKD) is the leading inheritable cause of end-stage renal disease (ESRD); however, the natural course of disease progression is heterogeneous between patients. This study aimed to develop a natural history model of ADPKD that predicted progression rates and long-term outcomes in patients with differing baseline characteristics. The ADPKD Outcomes Model (ADPKD-OM) was developed using available patient-level data from the placebo arm of the Tolvaptan Efficacy and Safety in Management of ADPKD and its Outcomes Study (TEMPO 3:4; ClinicalTrials.gov identifier NCT00428948). Multivariable regression equations estimating annual rates of ADPKD progression, in terms of total kidney volume (TKV) and estimated glomerular filtration rate, formed the basis of the lifetime patient-level simulation model. Outputs of the ADPKD-OM were compared against external data sources to validate model accuracy and generalisability to other ADPKD patient populations, then used to predict long-term outcomes in a cohort matched to the overall TEMPO 3:4 study population. A cohort with baseline patient characteristics consistent with TEMPO 3:4 was predicted to reach ESRD at a mean age of 52 years. Most patients (85%) were predicted to reach ESRD by the age of 65 years, with many progressing to ESRD earlier in life (18, 36 and 56% by the age of 45, 50 and 55 years, respectively). Consistent with previous research and clinical opinion, analyses supported the selection of baseline TKV as a prognostic factor for ADPKD progression, and demonstrated its value as a strong predictor of future ESRD risk. Validation exercises and illustrative analyses confirmed the ability of the ADPKD-OM to accurately predict disease progression towards ESRD across a range of clinically-relevant patient profiles. The ADPKD-OM represents a robust tool to predict natural disease progression and long-term outcomes in ADPKD patients, based on readily available and/or measurable clinical characteristics. In conjunction with clinical judgement, it has the potential to support decision-making in research and clinical practice.

Fingerprinting of bed sediment in the Tay Estuary, Scotland: an environmental magnetism approach

NASA Astrophysics Data System (ADS)

Jenkins, Pierre A.; Duck, Rob W.; Rowan, John S.; Walden, John

Sediment fingerprinting is commonly used for sediment provenance studies in lakes, rivers and reservoirs and on hillslopes and floodplains. This investigation explores the mixing of terrestrial and marine-derived sediment in the Tay Estuary, Scotland, using mineral magnetic attributes for fingerprinting. Samples representative of the estuary sediments and of four sources (end-members) were subjected to a suite of magnetic susceptibility and remanence measurements. Sediment samples from the beds of the Rivers Tay and Earn represented fluvial inputs while samples from the Angus and Fife coasts represented marine input. Multivariate discriminant and factor analysis showed that the sources could be separated on the basis of six magnetic parameters in a simple multivariate unmixing model to identify source contributions to estuarine bed sediments. Multi-domain magnetite signatures, characteristic of unweathered bedrock, dominate the magnetic measurements. Overall contributions of 3% from the River Earn, 17% from the River Tay, 29% from the Angus coast and 51% from the Fife coast source end-members, demonstrated the present-day regime of marine sediment derivation in the Tay Estuary. However, this conceals considerable spatial variability both along-estuary and in terms of sub-environments, with small-scale variations in sediment provenance reflecting local morphology, particularly areas of channel convergence.

Sources and characteristics of terrestrial carbon in Holocene-scale sediments of the East Siberian Sea

NASA Astrophysics Data System (ADS)

Keskitalo, Kirsi; Tesi, Tommaso; Bröder, Lisa; Andersson, August; Pearce, Christof; Sköld, Martin; Semiletov, Igor P.; Dudarev, Oleg V.; Gustafsson, Örjan

2017-09-01

Thawing of permafrost carbon (PF-C) due to climate warming can remobilise considerable amounts of terrestrial carbon from its long-term storage to the marine environment. PF-C can be then be buried in sediments or remineralised to CO2 with implications for the carbon-climate feedback. Studying historical sediment records during past natural climate changes can help us to understand the response of permafrost to current climate warming. In this study, two sediment cores collected from the East Siberian Sea were used to study terrestrial organic carbon sources, composition and degradation during the past ˜ 9500 cal yrs BP. CuO-derived lignin and cutin products (i.e., compounds solely biosynthesised in terrestrial plants) combined with δ13C suggest that there was a higher input of terrestrial organic carbon to the East Siberian Sea between ˜ 9500 and 8200 cal yrs BP than in all later periods. This high input was likely caused by marine transgression and permafrost destabilisation in the early Holocene climatic optimum. Based on source apportionment modelling using dual-carbon isotope (Δ14C, δ13C) data, coastal erosion releasing old Pleistocene permafrost carbon was identified as a significant source of organic matter translocated to the East Siberian Sea during the Holocene.

Calculations to support JET neutron yield calibration: Modelling of neutron emission from a compact DT neutron generator

NASA Astrophysics Data System (ADS)

Čufar, Aljaž; Batistoni, Paola; Conroy, Sean; Ghani, Zamir; Lengar, Igor; Milocco, Alberto; Packer, Lee; Pillon, Mario; Popovichev, Sergey; Snoj, Luka; JET Contributors

2017-03-01

At the Joint European Torus (JET) the ex-vessel fission chambers and in-vessel activation detectors are used as the neutron production rate and neutron yield monitors respectively. In order to ensure that these detectors produce accurate measurements they need to be experimentally calibrated. A new calibration of neutron detectors to 14 MeV neutrons, resulting from deuterium-tritium (DT) plasmas, is planned at JET using a compact accelerator based neutron generator (NG) in which a D/T beam impinges on a solid target containing T/D, producing neutrons by DT fusion reactions. This paper presents the analysis that was performed to model the neutron source characteristics in terms of energy spectrum, angle-energy distribution and the effect of the neutron generator geometry. Different codes capable of simulating the accelerator based DT neutron sources are compared and sensitivities to uncertainties in the generator's internal structure analysed. The analysis was performed to support preparation to the experimental measurements performed to characterize the NG as a calibration source. Further extensive neutronics analyses, performed with this model of the NG, will be needed to support the neutron calibration experiments and take into account various differences between the calibration experiment and experiments using the plasma as a source of neutrons.

Line focus x-ray tubes—a new concept to produce high brilliance x-rays

NASA Astrophysics Data System (ADS)

Bartzsch, Stefan; Oelfke, Uwe

2017-11-01

Currently hard coherent x-ray radiation at high photon fluxes can only be produced with large and expensive radiation sources, such as 3rd generation synchrotrons. Especially in medicine, this limitation prevents various promising developments in imaging and therapy from being translated into clinical practice. Here we present a new concept of highly brilliant x-ray sources, line focus x-ray tubes (LFXTs), which may serve as a powerful and cheap alternative to synchrotrons and a range of other existing technologies. LFXTs employ an extremely thin focal spot and a rapidly rotating target for the electron beam which causes a change in the physical mechanism of target heating, allowing higher electron beam intensities at the focal spot. Monte Carlo simulations and numeric solutions of the heat equation are used to predict the characteristics of the LFXT. In terms of photon flux and coherence length, the performance of the line focus x-ray tube compares with inverse Compton scattering sources. Dose rates of up to 180 Gy s-1 can be reached in 50 cm distance from the focal spot. The results demonstrate that the line focus tube can serve as a powerful compact source for phase contrast imaging and microbeam radiation therapy. The production of a prototype seems technically feasible.

Tracking natural and anthropogenic Pb exposure to its geological source.

PubMed

Evans, Jane; Pashley, Vanessa; Madgwick, Richard; Neil, Samantha; Chenery, Carolyn

2018-01-31

Human Pb exposure comes from two sources: (i) natural uptake through ingestion of soils and typified by populations that predate mining activity and (ii) anthropogenic exposure caused by the exposure to Pb derived from ore deposits. Currently, the measured concentration of Pb within a sample is used to discriminate between these two exposure routes, with the upper limit for natural exposure in skeletal studies given as 0.5 or 0.7 mg/kg in enamel and 0.5/0.7 μg/dL in blood. This threshold approach to categorising Pb exposure does not distinguish between the geological origins of the exposure types. However, Pb isotopes potentially provide a more definitive means of discriminating between sources. Whereas Pb from soil displays a crustal average 238 U/ 204 Pb (μ) value of c 9.7, Pb from ore displays a much wider range of evolution pathways. These characteristics are transferred into tooth enamel, making it possible to characterize human Pb exposure in terms of the primary source of ingested Pb and to relate mining activity to geotectonic domains. We surmise that this ability to discriminate between silicate and sulphide Pb exposure will lead to a better understanding of the evolution of early human mining activity and development of exposure models through the Anthropocene.

The influence of cross-order terms in interface mobilities for structure-borne sound source characterization

NASA Astrophysics Data System (ADS)

Bonhoff, H. A.; Petersson, B. A. T.

2010-08-01

For the characterization of structure-borne sound sources with multi-point or continuous interfaces, substantial simplifications and physical insight can be obtained by incorporating the concept of interface mobilities. The applicability of interface mobilities, however, relies upon the admissibility of neglecting the so-called cross-order terms. Hence, the objective of the present paper is to clarify the importance and significance of cross-order terms for the characterization of vibrational sources. From previous studies, four conditions have been identified for which the cross-order terms can become more influential. Such are non-circular interface geometries, structures with distinctively differing transfer paths as well as a suppression of the zero-order motion and cases where the contact forces are either in phase or out of phase. In a theoretical study, the former four conditions are investigated regarding the frequency range and magnitude of a possible strengthening of the cross-order terms. For an experimental analysis, two source-receiver installations are selected, suitably designed to obtain strong cross-order terms. The transmitted power and the source descriptors are predicted by the approximations of the interface mobility approach and compared with the complete calculations. Neglecting the cross-order terms can result in large misinterpretations at certain frequencies. On average, however, the cross-order terms are found to be insignificant and can be neglected with good approximation. The general applicability of interface mobilities for structure-borne sound source characterization and the description of the transmission process thereby is confirmed.

[Etiological and molecular characteristics of diarrhea caused Proteus mirabilis].

PubMed

Shi, Xiaolu; Hu, Qinghua; Lin, Yiman; Qiu, Yaqun; Li, Yinghui; Jiang, Min; Chen, Qiongcheng

2014-06-01

To analyze the etiological characteristics, virulence genes and plasmids that carrying diarrhea-causing Proteus mirabilis and to assess their relationship with drug resistance and pathogenicity. Proteus mirabilis coming from six different sources (food poisoning, external environment and healthy people) were analyzed biochemically, on related susceptibility and pulsed-field gel electrophoresis (PFGE). Virulence genes were detected by PCR. Plasmids were extracted and sequenced after gel electrophoresis purification. The biochemical characteristics of Proteus mirabilis from different sources seemed basically the same, and each of them showed having common virulence genes, as ureC, rsmA, hpmA and zapA. However, the PFGE patterns and susceptibility of these strains were different, so as the plasmids that they carried. Plasmid that presented in the sequenced strain showed that the 2 683 bp length plasmid encodes qnrD gene was associated with the quinolone resistance. Etiological characteristics and molecular characteristics of Proteus mirabilis gathered from different sources, were analyzed. Results indicated that traditional biochemical analysis and common virulence gene identification might be able to distinguish the strains with different sources. However, PFGE and plasmids analysis could distinguish the sources of strains and to identify those plasmids that commonly carried by the drug-resistant strains. These findings also provided theoretical basis for further study on the nature of resistance and pathogenicity in Proteus mirabilis.

Translations on Eastern Europe Political, Sociological, and Military Affairs, Number 1428

DTIC Science & Technology

1977-08-08

sources are translated; those from English-language sources are transcribed or reprinted, with the original phrasing and other characteristics retained...fraternity and firm affinity that is characteristic of the relations between good friends and communists. We are certain that your visit to our country...working class, the international unity, is more important than the national unity. These fundamental characteristics of proletarian international

Surfing for suicide methods and help: content analysis of websites retrieved with search engines in Austria and the United States.

PubMed

Till, Benedikt; Niederkrotenthaler, Thomas

2014-08-01

The Internet provides a variety of resources for individuals searching for suicide-related information. Structured content-analytic approaches to assess intercultural differences in web contents retrieved with method-related and help-related searches are scarce. We used the 2 most popular search engines (Google and Yahoo/Bing) to retrieve US-American and Austrian search results for the term suicide, method-related search terms (e.g., suicide methods, how to kill yourself, painless suicide, how to hang yourself), and help-related terms (e.g., suicidal thoughts, suicide help) on February 11, 2013. In total, 396 websites retrieved with US search engines and 335 websites from Austrian searches were analyzed with content analysis on the basis of current media guidelines for suicide reporting. We assessed the quality of websites and compared findings across search terms and between the United States and Austria. In both countries, protective outweighed harmful website characteristics by approximately 2:1. Websites retrieved with method-related search terms (e.g., how to hang yourself) contained more harmful (United States: P < .001, Austria: P < .05) and fewer protective characteristics (United States: P < .001, Austria: P < .001) compared to the term suicide. Help-related search terms (e.g., suicidal thoughts) yielded more websites with protective characteristics (United States: P = .07, Austria: P < .01). Websites retrieved with U.S. search engines generally had more protective characteristics (P < .001) than searches with Austrian search engines. Resources with harmful characteristics were better ranked than those with protective characteristics (United States: P < .01, Austria: P < .05). The quality of suicide-related websites obtained depends on the search terms used. Preventive efforts to improve the ranking of preventive web content, particularly regarding method-related search terms, seem necessary. © Copyright 2014 Physicians Postgraduate Press, Inc.

How are streamflow responses to the El Nino Southern Oscillation affected by watershed characteristics?

NASA Astrophysics Data System (ADS)

Rice, Joshua S.; Emanuel, Ryan E.

2017-05-01

Understanding the factors that influence how global climate phenomena, such as the El-Nino Southern Oscillation (ENSO), affect streamflow behavior is an important area of research in the hydrologic sciences. While large-scale patterns in ENSO-streamflow relationships have been thoroughly studied, and are relatively well-understood, information is scarce concerning factors that affect variation in ENSO responses from one watershed to another. To this end, we examined relationships between variability in ENSO activity and streamflow for 2731 watersheds across the conterminous U.S. from 1970 to 2014 using a novel approach to account for the intermediary role of precipitation. We applied an ensemble of regression techniques to describe relationships between variability in ENSO activity and streamflow as a function of watershed characteristics including: hydroclimate, topography, geomorphology, geographic location, land cover, soil characteristics, bedrock geology, and anthropogenic influences. We found that variability in watershed scale ENSO-streamflow relationships was strongly related to factors including: precipitation timing and phase, forest cover, and interactions between watershed topography and geomorphology. These, and other influential factors, share in common the ability to affect the partitioning and movement of water within watersheds. Our results demonstrate that the conceptualization of watersheds as signal filters for hydroclimate inputs, commonly applied to short-term rainfall-runoff responses, also applies to long-term hydrologic responses to sources of recurrent climate variability. These results also show that watershed processes, which are typically studied at relatively fine spatial scales, are also critical for understanding continental scale hydrologic responses to global climate.

High level of distress in long-term survivors of thyroid carcinoma: results of rapid screening using the distress thermometer.

PubMed

Roerink, Sean H P P; de Ridder, Mischa; Prins, Judith; Huijbers, Angelique; de Wilt, Hans J H; Marres, Henri; Repping-Wuts, Han; Stikkelbroeck, Nike M M L; Timmers, Henri J; Hermus, Ad R M M; Netea-Maier, Romana T

2013-01-01

Cancer patients are at increased risk for distress. The Distress Thermometer (DT) and problem list (PL) are short-tools validated and recommended for distress screening in cancer patients. To investigate the level of distress and problems experienced by survivors of differentiated non-medullary thyroid carcinoma (DTC), using the DT and PL and whether this correlates with clinical and demographical variables. All 205 DTC patients, under follow-up at the outpatient clinic of our university hospital, were asked to fill in the DT and PL, hospital anxiety and depression scale (HADS), illness cognition questionnaire (ICQ) and an ad hoc questionnaire. Receiver Operator Characteristic analysis (ROC) was used to establish the optimal DT cut-off score according to HADS. Correlations of questionnaires scores with data on diagnosis, treatment and follow-up collected from medical records were analyzed. Of the 159 respondents, 145 agreed to participate [118 in remission, median follow-up 7.2 years (range 3 months-41 years)]. Of these, 34.3% rated their distress score ≥5, indicating clinically relevant distress according to ROC analysis. Patients reported physical (86%) over emotional problems (76%) as sources of distress. DT scores correlated with HADS scores and ICQ subscales. No significant correlations were found between DT scores and clinical or demographical characteristics except for employment status. Prevalence of distress is high among patients with DTC even after long-term remission and cannot be predicted by clinical and demographical characteristics. DT and PL are useful screening instruments for distress in DTC patients and could easily be incorporated into daily practice.

Synthetic earthquake catalogs simulating seismic activity in the Corinth Gulf, Greece, fault system

NASA Astrophysics Data System (ADS)

Console, Rodolfo; Carluccio, Roberto; Papadimitriou, Eleftheria; Karakostas, Vassilis

2015-01-01

The characteristic earthquake hypothesis is the basis of time-dependent modeling of earthquake recurrence on major faults. However, the characteristic earthquake hypothesis is not strongly supported by observational data. Few fault segments have long historical or paleoseismic records of individually dated ruptures, and when data and parameter uncertainties are allowed for, the form of the recurrence distribution is difficult to establish. This is the case, for instance, of the Corinth Gulf Fault System (CGFS), for which documents about strong earthquakes exist for at least 2000 years, although they can be considered complete for M ≥ 6.0 only for the latest 300 years, during which only few characteristic earthquakes are reported for individual fault segments. The use of a physics-based earthquake simulator has allowed the production of catalogs lasting 100,000 years and containing more than 500,000 events of magnitudes ≥ 4.0. The main features of our simulation algorithm are (1) an average slip rate released by earthquakes for every single segment in the investigated fault system, (2) heuristic procedures for rupture growth and stop, leading to a self-organized earthquake magnitude distribution, (3) the interaction between earthquake sources, and (4) the effect of minor earthquakes in redistributing stress. The application of our simulation algorithm to the CGFS has shown realistic features in time, space, and magnitude behavior of the seismicity. These features include long-term periodicity of strong earthquakes, short-term clustering of both strong and smaller events, and a realistic earthquake magnitude distribution departing from the Gutenberg-Richter distribution in the higher-magnitude range.

Long term X-ray variability characteristics of the narrow-line Seyfert 1 galaxy RE J1034+396

NASA Astrophysics Data System (ADS)

Chaudhury, K.; Chitnis, V. R.; Rao, A. R.; Singh, K. P.; Bhattacharyya, Sudip; Dewangan, G. C.; Chakraborty, S.; Chandra, S.; Stewart, G. C.; Mukerjee, K.; Dey, R. K.

2018-05-01

We present the results of our study of the long term X-ray variability characteristics of the Narrow Line Seyfert 1 galaxy RE J1034+396. We use data obtained from the AstroSat satellite along with the light curves obtained from XMM-Newton and Swift-XRT. We use the 0.3 - 7.0 keV and 3 - 20 keV data, respectively, from the SXT and the LAXPC of AstroSat. The X-ray spectra in the 0.3 - 20 keV region are well fit with a model consisting of a power-law and a soft excess described by a thermal-Compton emission with a large optical depth, consistent with the earlier reported results. We have examined the X-ray light curves in the soft and hard X-ray bands of SXT and LAXPC, respectively, and find that the variability is slightly larger in the hard band. To investigate the variability characteristics of this source at different time scales, we have used X-ray light curves obtained from XMM-Newton data (200 s to 100 ks range) and Swift-XRT data (1 day to 100 day range) and find that there are evidences to suggest that the variability sharply increases at longer time scales. We argue that the mass of the black hole in RE J1034+396 is likely to be ˜3 × 106 M⊙, based on the similarity of the observed QPO to the high frequency QPO seen in the Galactic black hole binary, GRS 1915+105.

"Masculinity, Femininity, Achievement Conflicts and Health."

ERIC Educational Resources Information Center

Olds, Debra Eaton

The objective of this study is to measure achievement motivation in terms of psychological masculinity and femininity rather than in terms of biological gender. The terms, psychological masculinity and femininity, refer to sets of characteristics desirable for both sexes. Masculine characteristics include independence, self-confidence,…

Alcohol harm reduction advertisements: a content analysis of topic, objective, emotional tone, execution and target audience.

PubMed

Dunstone, Kimberley; Brennan, Emily; Slater, Michael D; Dixon, Helen G; Durkin, Sarah J; Pettigrew, Simone; Wakefield, Melanie A

2017-04-11

Public health mass media campaigns may contribute to reducing the health and social burden attributed to alcohol consumption, but little is known about which advertising characteristics have been used, or have been effective, in alcohol harm reduction campaigns to date. As a first step towards encouraging further research to identify the impact of various advertising characteristics, this study aimed to systematically identify and examine the content of alcohol harm reduction advertisements (ads). Ads were identified through an exhaustive internet search of Google, YouTube, Vimeo, and relevant government and health agency websites. Eligible ads were: English language, produced between 2006 and 2014, not primarily focused on drink-driving or alcohol in pregnancy, and not alcohol industry funded. Systematic content analysis of all ads was performed; each ad was double-coded. In total, 110 individual ads from 72 different alcohol harm reduction campaigns were identified, with the main source countries being Australia (40%) and the United Kingdom (26%). The dominant topic for 52% of ads was short-term harms, while 10% addressed long-term harms, 18% addressed underage drinking, 17% communicated a how-to-change message, and 3% advocated for policy change. The behavioural objective of most ads was to motivate audiences to reduce their alcohol consumption (38%) or to behave responsibly and/or not get drunk when drinking (33%). Only 10% of all ads mentioned low-risk drinking guidelines. Eighty-seven percent of ads used a dramatisation execution style and 74% had a negative emotional tone. Ninety percent of ads contained messages or content that appeared to target adults, and 36% specifically targeted young adults. Some message attributes have been employed more frequently than others, suggesting several promising avenues for future audience or population-based research to compare the relative effectiveness of different characteristics of alcohol harm reduction ads. Given most alcohol-attributable harm is due to long-term disease, these findings suggest future campaigns may fill a potentially important gap if they were to focus on long-term harms. There is scope for such long-term harm campaigns to place greater emphasis on encouraging reduced personal consumption of alcohol, potentially through more frequent communication of low-risk drinking guidelines.

Correction: Spectroscopic characteristics of the OSIRIS near-backscattering crystal analyser spectrometer on the ISIS pulsed neutron source.

PubMed

Telling, Mark T F; Campbell, Stuart I; Engberg, Dennis; Martín Y Marero, David; Andersen, Ken H

2016-03-21

Correction for 'Spectroscopic characteristics of the OSIRIS near-backscattering crystal analyser spectrometer on the ISIS pulsed neutron source' by Mark T. F. Telling et al., Phys. Chem. Chem. Phys., 2005, 7, 1255-1261.

Shipboard monitoring of non-CO2 greenhouse gases in Asia and Oceania using commercially cargo vessels

NASA Astrophysics Data System (ADS)

Nara, H.; Tanimoto, H.; Mukai, H.; Nojiri, Y.; Tohjima, Y.; Machida, T.; Hashimoto, S.

2011-12-01

The National Institute for Environmental Studies (NIES) has been performing a long-term program for monitoring trace gases of atmospheric importance over the Pacific Ocean since 1995. The NIES Voluntary Observing Ships (NIES-VOS) program currently makes use of commercial cargo vessels because they operate regularly over fixed routes for long periods and sail over a wide area between various ports (e.g., between Japan and the United States, between Japan and Australia/New Zealand, and between Japan and southeast Asia). This program allows systematic and continuous measurements of non-CO2 greenhouse gases, providing long-term datasets for background air over the Pacific Ocean and regionally polluted air around east Asia. We observe both long-lived greenhouse gases (e.g., carbon dioxide) and short-lived air pollutants (e.g., tropospheric ozone, carbon monoxide) on a continuous basis. Flask samples are collected for later laboratory analysis of carbon dioxide, methane, nitrous oxide, and carbon monoxide by using gas chromatographic techniques. In addition, we recently installed cavity ringdown spectrometers for high-resolution measurement of methane and carbon dioxide to capture their highly variable features in regionally polluted air around southeast Asia (e.g., Hong Kong, Thailand, Singapore, Malaysia, Indonesia and Philippine), which is now thought to be a large source due to expanding socioeconomic activities as well as biomass burnings. Contrasting the Japan-Australia/New Zealand and Japan-southeast Asia cruises revealed regional characteristics of sources and sinks of these atmospherically important species, suggesting the existence of additional sources for methane, nitrous oxides, and carbon monoxide in this tropical Asian region.

Recent changes in the oxidized to reduced nitrogen ratio in atmospheric precipitation

NASA Astrophysics Data System (ADS)

Kurzyca, Iwona; Frankowski, Marcin

2017-10-01

In this study, the characteristics of precipitation in terms of various nitrogen forms (NO3-, NO2-, NH4+, Norganic, Ntotal) is presented. The samples were collected in the areas of different anthropogenic pressure (urban area vs. ecologically protected woodland area, ∼30 km distant from each other; Wielkopolska region, Poland). Based on the Nox and Nred emission profiles (Nox/Nred ratio), temporal and spatial comparison was carried out. For both sites, during a decade of observation, more than 60% of samples had higher contribution of N-NH4+ than N-NO3-, the amount of N-NO2- was negligible, and organic nitrogen amounted to 30% of total nitrogen content which varied up to 16 mg/l. The precipitation events w ith high concentration of nitrogen species were investigated in terms of possible local and remote sources of nitrogen (synoptic meteorology), to indicate the areas which can act as potential sources of N-compounds. Based on the chemometric analysis, it was found that Nred implies Nox and vice versa, due to interactions between them in the atmosphere. Taking into account the analysis of precipitation occurring simultaneously in both locations (about 50% of all rainfall episodes), it was observed that such factor as anthropogenic pressure differentiates but does not determine the chemical composition of precipitation in the investigated areas (urban vs. woodland area; distance of ∼30 km). Thermodynamics of the atmosphere had a significant impact on concentrations of N-NO3- and N-NH4+ in precipitation, as well as the circulation of air masses and remote N sources responsible for transboundary inflow of pollutants.

Chemical characterization and source apportionment of fine particulate matter in Yangzhou, China, using offline aerosol mass spectrometry

NASA Astrophysics Data System (ADS)

Li, L.; Ge, X.; Xu, J.; Ye, Z.

2016-12-01

In recent years, Aerodyne Aerosol Mass Spectrometer (AMS) has been widely used for online and real-time monitoring of fine aerosol particles all over the world. However, due to the high cost and complex maintenance, the AMS was typically deployed for short-term intense field measurements, limiting its ability in elucidating the long-term behaviors and dominant sources of regional fine particles (PM2.5). In this study, we collected daily PM2.5 filter samples across a relatively long period (November 2015 to April 2016, in total >100 samples) using a high-volume sampler, in urban Yangzhou - a city in the Yangtze River Delta region, China. These samples were analyzed by using a suite of analytical techniques, for the water-soluble inorganic ions (WSIs), organic carbon (OC), elemental carbon (EC), water-soluble organic carbon (WSOC) and total nitrogen (TN), trace metal elements, etc. More importantly, an Aerodyne soot particle aerosol mass spectrometer (SP-AMS) was for the first time introduced for the offline characterization of the PM2.5 samples collected in this region. In particular, Positive matrix factorization was conducted on the SP-AMS determined water-soluble fraction of organic aerosols (WSOA), and three distinct sources were separated, including a primary OA (POA), a less oxygenated OA (LOOA), and a more oxygenated OA (MOOA). Chemical characteristics and evolution processes of these OA subcomponents were further discussed. Our results are useful for the air pollution management in the YRD region, and the technique developed can be applied elsewhere as well.

Terms used by nurses to describe patient problems: can SNOMED III represent nursing concepts in the patient record?

PubMed Central

Henry, S B; Holzemer, W L; Reilly, C A; Campbell, K E

1994-01-01

OBJECTIVE: To analyze the terms used by nurses in a variety of data sources and to test the feasibility of using SNOMED III to represent nursing terms. DESIGN: Prospective research design with manual matching of terms to the SNOMED III vocabulary. MEASUREMENTS: The terms used by nurses to describe patient problems during 485 episodes of care for 201 patients hospitalized for Pneumocystis carinii pneumonia were identified. Problems from four data sources (nurse interview, intershift report, nursing care plan, and nurse progress note/flowsheet) were classified based on the substantive area of the problem and on the terminology used to describe the problem. A test subset of the 25 most frequently used terms from the two written data sources (nursing care plan and nurse progress note/flowsheet) were manually matched to SNOMED III terms to test the feasibility of using that existing vocabulary to represent nursing terms. RESULTS: Nurses most frequently described patient problems as signs/symptoms in the verbal nurse interview and intershift report. In the written data sources, problems were recorded as North American Nursing Diagnosis Association (NANDA) terms and signs/symptoms with similar frequencies. Of the nursing terms in the test subset, 69% were represented using one or more SNOMED III terms. PMID:7719788

A Semi-implicit Treatment of Porous Media in Steady-State CFD.

PubMed

Domaingo, Andreas; Langmayr, Daniel; Somogyi, Bence; Almbauer, Raimund

There are many situations in computational fluid dynamics which require the definition of source terms in the Navier-Stokes equations. These source terms not only allow to model the physics of interest but also have a strong impact on the reliability, stability, and convergence of the numerics involved. Therefore, sophisticated numerical approaches exist for the description of such source terms. In this paper, we focus on the source terms present in the Navier-Stokes or Euler equations due to porous media-in particular the Darcy-Forchheimer equation. We introduce a method for the numerical treatment of the source term which is independent of the spatial discretization and based on linearization. In this description, the source term is treated in a fully implicit way whereas the other flow variables can be computed in an implicit or explicit manner. This leads to a more robust description in comparison with a fully explicit approach. The method is well suited to be combined with coarse-grid-CFD on Cartesian grids, which makes it especially favorable for accelerated solution of coupled 1D-3D problems. To demonstrate the applicability and robustness of the proposed method, a proof-of-concept example in 1D, as well as more complex examples in 2D and 3D, is presented.

Characteristics of Love and Rayleigh waves in ambient noise: wavetype ratio, source location and seasonal behavior

NASA Astrophysics Data System (ADS)

Juretzek, C.; Perleth, M.; Hadziioannou, C.

2015-12-01

Ambient seismic noise has become an important source of signal for tomography and monitoring purposes. Better understanding of the noise field characteristics is crucial to further improve noise applications. Our knowledge about the common and different origins of Love and Rayleigh waves in the microseism bands is still limited. This applies in particular to constraints on source locations and source mechanisms of Love waves. Here, 3-component beamforming is used to distinguish between the differently polarized wave types present in the noise field recorded at several arrays across Europe. The focus lies on frequencies around the primary and secondary microseismic bands. We compare characteristics of Love and Rayleigh wave noise, such as source directions and frequency content. Further, Love to Rayleigh wave ratios are measured at each array, and a dependence on direction is observed. We constrain the corresponding source regions of both wave types by backprojection. By using a full year of data in 2013, we are able to track the seasonal changes in our observations of Love-to-Rayleigh ratio and source locations.

Analysis of source regions and meteorological factors for the variability of spring PM10 concentrations in Seoul, Korea

NASA Astrophysics Data System (ADS)

Lee, Jangho; Kim, Kwang-Yul

2018-02-01

CSEOF analysis is applied for the springtime (March, April, May) daily PM10 concentrations measured at 23 Ministry of Environment stations in Seoul, Korea for the period of 2003-2012. Six meteorological variables at 12 pressure levels are also acquired from the ERA Interim reanalysis datasets. CSEOF analysis is conducted for each meteorological variable over East Asia. Regression analysis is conducted in CSEOF space between the PM10 concentrations and individual meteorological variables to identify associated atmospheric conditions for each CSEOF mode. By adding the regressed loading vectors with the mean meteorological fields, the daily atmospheric conditions are obtained for the first five CSEOF modes. Then, HYSPLIT model is run with the atmospheric conditions for each CSEOF mode in order to back trace the air parcels and dust reaching Seoul. The K-means clustering algorithm is applied to identify major source regions for each CSEOF mode of the PM10 concentrations in Seoul. Three main source regions identified based on the mean fields are: (1) northern Taklamakan Desert (NTD), (2) Gobi Desert and (GD), and (3) East China industrial area (ECI). The main source regions for the mean meteorological fields are consistent with those of previous study; 41% of the source locations are located in GD followed by ECI (37%) and NTD (21%). Back trajectory calculations based on CSEOF analysis of meteorological variables identify distinct source characteristics associated with each CSEOF mode and greatly facilitate the interpretation of the PM10 variability in Seoul in terms of transportation route and meteorological conditions including the source area.

A review on the effect of fly ash characteristics and their variations on the synthesis of fly ash based geopolymer

NASA Astrophysics Data System (ADS)

Wattimena, Oswyn K.; Antoni, Hardjito, Djwantoro

2017-09-01

There are more than four decades since the last 1970s where geopolymers concrete was first introduced and developed to use as a replacement to conventional concrete material which uses cement as a binder. And since the last two decades, geopolymers which utilized fly ash as aluminosilicate source material, i.e. fly ash based geopolymers, have been investigated. Many researchers present how to produce the best fly ash based geopolymer with a various source of constituent material as well as mixing formula to achieve exceptional concrete performance. Although there is a similar trend towards factors affecting the result of fly ash based geopolymer synthesis, there is still remain a wide range in mixture proportion. The considerable variation in fly ash characteristics as source material in the synthesis can very likely be one of the causes of this problem. This paper attempts to identify the effect of source material variation of geopolymer concrete, particularly which use fly ash as source material and focuses on the variation of its characteristics and the effects to properties of concrete. From the reviews it concluded that different sources (and even the same source, but different batch) of fly ash materials will give some different characteristics of the fly ash, where it would affect the synthesis process of the fly ash based geopolymer concretes.

Estimation of the caesium-137 source term from the Fukushima Daiichi nuclear power plant using a consistent joint assimilation of air concentration and deposition observations

NASA Astrophysics Data System (ADS)

Winiarek, Victor; Bocquet, Marc; Duhanyan, Nora; Roustan, Yelva; Saunier, Olivier; Mathieu, Anne

2014-01-01

Inverse modelling techniques can be used to estimate the amount of radionuclides and the temporal profile of the source term released in the atmosphere during the accident of the Fukushima Daiichi nuclear power plant in March 2011. In Winiarek et al. (2012b), the lower bounds of the caesium-137 and iodine-131 source terms were estimated with such techniques, using activity concentration measurements. The importance of an objective assessment of prior errors (the observation errors and the background errors) was emphasised for a reliable inversion. In such critical context where the meteorological conditions can make the source term partly unobservable and where only a few observations are available, such prior estimation techniques are mandatory, the retrieved source term being very sensitive to this estimation. We propose to extend the use of these techniques to the estimation of prior errors when assimilating observations from several data sets. The aim is to compute an estimate of the caesium-137 source term jointly using all available data about this radionuclide, such as activity concentrations in the air, but also daily fallout measurements and total cumulated fallout measurements. It is crucial to properly and simultaneously estimate the background errors and the prior errors relative to each data set. A proper estimation of prior errors is also a necessary condition to reliably estimate the a posteriori uncertainty of the estimated source term. Using such techniques, we retrieve a total released quantity of caesium-137 in the interval 11.6-19.3 PBq with an estimated standard deviation range of 15-20% depending on the method and the data sets. The “blind” time intervals of the source term have also been strongly mitigated compared to the first estimations with only activity concentration data.

Inferring the nature of anthropogenic threats from long-term abundance records.

PubMed

Shoemaker, Kevin T; Akçakaya, H Resit

2015-02-01

Diagnosing the processes that threaten species persistence is critical for recovery planning and risk forecasting. Dominant threats are typically inferred by experts on the basis of a patchwork of informal methods. Transparent, quantitative diagnostic tools would contribute much-needed consistency, objectivity, and rigor to the process of diagnosing anthropogenic threats. Long-term census records, available for an increasingly large and diverse set of taxa, may exhibit characteristic signatures of specific threatening processes and thereby provide information for threat diagnosis. We developed a flexible Bayesian framework for diagnosing threats on the basis of long-term census records and diverse ancillary sources of information. We tested this framework with simulated data from artificial populations subjected to varying degrees of exploitation and habitat loss and several real-world abundance time series for which threatening processes are relatively well understood: bluefin tuna (Thunnus maccoyii) and Atlantic cod (Gadus morhua) (exploitation) and Red Grouse (Lagopus lagopus scotica) and Eurasian Skylark (Alauda arvensis) (habitat loss). Our method correctly identified the process driving population decline for over 90% of time series simulated under moderate to severe threat scenarios. Successful identification of threats approached 100% for severe exploitation and habitat loss scenarios. Our method identified threats less successfully when threatening processes were weak and when populations were simultaneously affected by multiple threats. Our method selected the presumed true threat model for all real-world case studies, although results were somewhat ambiguous in the case of the Eurasian Skylark. In the latter case, incorporation of an ancillary source of information (records of land-use change) increased the weight assigned to the presumed true model from 70% to 92%, illustrating the value of the proposed framework in bringing diverse sources of information into a common rigorous framework. Ultimately, our framework may greatly assist conservation organizations in documenting threatening processes and planning species recovery. © 2014 Society for Conservation Biology.

Geochemistry and carbon isotopic ratio for assessment of PM10 composition, source and seasonal trends in urban environment.

PubMed

Di Palma, A; Capozzi, F; Agrelli, D; Amalfitano, C; Giordano, S; Spagnuolo, V; Adamo, P

2018-08-01

Investigating the nature of PM 10 is crucial to differentiate sources and their relative contributions. In this study we compared the levels, and the chemical and mineralogical properties of PM 10 particles sampled in different seasons at monitoring stations representative of urban background, urban traffic and suburban traffic areas of Naples city. The aims were to relate the PM 10 load and characteristics to the location of the monitoring stations, to investigate the different sources contributing to PM 10 and to highlight PM 10 seasonal variability. Bulk analyses of chemical species in the PM 10 fraction included total carbon and nitrogen, δ 13 C and other 20 elements. Both natural and anthropogenic sources were found to contribute to the exceedances of the EU PM 10 limit values. The natural contribution was mainly related to marine aerosols and soil dust, as highlighted by X-ray diffractometry and SEM-EDS microscopy. The percentage of total carbon suggested a higher contribution of biogenic components to PM 10 in spring. However, this result was not supported by the δ 13 C values which were seasonally homogeneous and not sufficient to extract single emission sources. No significant differences, in terms of PM 10 load and chemistry, were observed between monitoring stations with different locations, suggesting a homogeneous distribution of PM 10 on the studied area in all seasons. The anthropogenic contribution to PM 10 seemed to dominate in all sites and seasons with vehicular traffic acting as a main source mostly by generation of non-exhaust emissions Our findings reinforce the need to focus more on the analysis of PM 10 in terms of quality than of load, to reconsider the criteria for the classification and the spatial distribution of the monitoring stations within urban and suburban areas, with a special attention to the background location, and to emphasize all the policies promoting sustainable mobility and reduction of both exhaust and not-exhaust traffic-related emissions. Copyright © 2018 Elsevier Ltd. All rights reserved.

[Isolation and identification of imazethapyr degradable actinomyces S181 and its degradation characteristics].

PubMed

Huo, Ying; Xu, Jing-gang; Li, Shu-qin; Wang, Lei

2011-05-01

A selection of actinomyces that could degrade imazethapyr was conducted to provide actinomyces source for bioremediation of soil contaminated by imazethapyr. A strain of actinomyces was isolated from the samples of soil where imazethapyr had been applied for a long-term by use of bottle enriched culture and named S181. The strain had strong ability to degrade imazethapyr and could grow using mazethapyr as the sole nitrogen. The strain was related and shared characteristics to genus Streptomyces omiyaensis according to the physiological and biochemical properties as well as 16S rRNA sequence analysis. The influencing factors (temperature, pH, concentration and inoculum) were studied with fungus growth mass and degradation ratio as indexes. The results showed that the optimal degradation ratio occurred at the condition of inoculation ratio of 3%, 200 mg x L(-1) imazethapyr, at 30 degrees C and pH 7.0. Under these conditions, 84% imazethapyr had been degraded by S181 in medium Gao 1 without nitrogen after 5 days.

Use of olive oil-in-water gelled emulsions in model turkey breast emulsions

NASA Astrophysics Data System (ADS)

Serdaroğlu, M.; Öztürk, B.

2017-09-01

Today, gelled emulsion systems offer a novel possibility in lipid modification of meat products. In this study, we aimed to investigate the quality characteristics of model turkey emulsions that were prepared with olive oil-in-water gelled emulsion (GE) as partial or total beef fat replacer. The results indicated that while most of the GE treatments showed equivalent emulsion characteristics in terms of emulsion stability, water-holding capacity and cook yield, utilization of 100% GE as the lipid source could increase total expressible fluid of the model turkey emulsion and thus negatively affect the quality. Utilization of GE was effective in total fat reduction, as the model turkey emulsions formulated with more than 50% GE had significantly lower fat content compared to full-beef fat control model emulsion. However, beef fat replacement with GE produced considerable changes in colour parameters. Finally, it was concluded that utilization of GE as a partial beef fat replacer has good potential to enhance stability and reduce total fat in turkey meat emulsion products.

Compost feedstock characteristics and ratio modelling for organic waste materials co-composting in Malaysia.

PubMed

Chai, E W; H'ng, P S; Peng, S H; Wan-Azha, W M; Chin, K L; Chow, M J; Wong, W Z

2013-01-01

In Malaysia, large amounts of organic materials, which lead to disposal problems, are generated from agricultural residues especially from palm oil industries. Increasing landfill costs and regulations, which limit many types of waste accepted at landfills, have increased the interest in composting as a component of waste management. The objectives of this study were to characterize compost feedstock properties of common organic waste materials available in Malaysia. Thus, a ratio modelling of matching ingredients for empty fruit bunches (EFBs) co-composting using different organic materials in Malaysia was done. Organic waste materials with a C/N ratio of < 30 can be applied as a nitrogen source in EFB co-composting. The outcome of this study suggested that the percentage of EFB ranged between 50% and 60%, which is considered as the ideal mixing ratio in EFB co-composting. Conclusively, EFB can be utilized in composting if appropriate feedstock in term of physical and chemical characteristics is coordinated in the co-composting process.

Hip Squeaking after Ceramic-on-ceramic Total Hip Arthroplasty

PubMed Central

Wu, Guo-Liang; Zhu, Wei; Zhao, Yan; Ma, Qi; Weng, Xi-Sheng

2016-01-01

Objective: The present study aimed to review the characteristics and influencing factors of squeaking after ceramic-on-ceramic (CoC) total hip arthroplasty (THA) and to analyze the possible mechanisms of the audible noise. Data Sources: The data analyzed in this review were based on articles from PubMed and Web of Science. Study Selection: The articles selected for review were original articles and reviews found based on the following search terms: “total hip arthroplasty”, “ceramic-on-ceramic”, “hip squeaking”, and “hip noise.” Results: The mechanism of the squeaking remains unknown. The possible explanations included stripe wear, edge loading, a third body, fracture of the ceramic liner, and resonance of the prosthesis components. Squeaking occurrence is influenced by patient, surgical, and implant factors. Conclusions: Most studies indicated that squeaking after CoC THA was the consequence of increasing wear or impingement, caused by prosthesis design, patient characteristics, or surgical factors. However, as conflicts exist among different articles, the major reasons for the squeaking remain to be identified. PMID:27453238

Organic Field Effect Transistors for Large Format Electronics

DTIC Science & Technology

2003-06-19

calculated output characteristics for a p-channel substrate insulator Organic layer Source Drain Gate 6 pentacene OFET with 2µm source to drain spacing...conventional transistors. Figure 3. Calculated output characteristics of a pentacene OFET with image charge induced contact barrier...Cross section view of a part of an OFET in the vicinity of a source or drain contact. local ordering due to surface energy effects. The development of

Accretion torques in X-ray pulsars

NASA Technical Reports Server (NTRS)

Rappaport, S.; Joss, P. C.

1977-01-01

An analysis of the accretion process in an X-ray pulsar, whereby angular momentum is transferred to the star and its rotation period is changed, is presented, and an expression for the fractional rate of change of the pulse period in terms of X-ray luminosity and other star parameters is derived. It is shown that observed characteristic spin-up time scales for seven X-ray pulsars strongly support the view that in every source (1) the pulse period reflects the rotation period of a compact object, (2) the accretion is mediated by a disk surrounding the compact object and rotating in the same sense, and (3) the compact object is a neutron star rather than a white dwarf.

Characteristics of preschoolers with lower perceived competence.

PubMed

Coplan, Robert J; Findlay, Leanne C; Nelson, Larry J

2004-08-01

The goal of the present study was to identify preschool children with "age-inappropriate" less positive self-perceptions, and to explore their parental and peer relationships as compared to their classmates with "age normal" self-perceptions. Participants were n = 127 preschool children (Mage = 54.98 mos., SD = 8.21). Data were collected from multiple sources including parental ratings, child self-reports, and teacher ratings. Results indicated that as compared to their peers, children with less positive self-perceptions demonstrated more internalizing problems (i.e., loneliness, social-withdrawal), were more excluded by peers, and had mothers with less positive parenting styles. Results are discussed in terms of the implications of poorer self-perceptions in early childhood.

On the numerical calculation of hydrodynamic shock waves in atmospheres by an FCT method

NASA Astrophysics Data System (ADS)

Schmitz, F.; Fleck, B.

1993-11-01

The numerical calculation of vertically propagating hydrodynamic shock waves in a plane atmosphere by the ETBFCT-version of the Flux Corrected Transport (FCT) method by Boris and Book is discussed. The results are compared with results obtained by a characteristic method with shock fitting. We show that the use of the internal energy density as a dependent variable instead of the total energy density can give very inaccurate results. Consequent discretization rules for the gravitational source terms are derived. The improvement of the results by an additional iteration step is discussed. It appears that the FCT method is an excellent method for the accurate calculation of shock waves in an atmosphere.

Characteristics of Ampel bamboo as a biomass energy source potential in Bali

NASA Astrophysics Data System (ADS)

Sucipta, M.; Putra Negara, D. N. K.; Tirta Nindhia, T. G.; Surata, I. W.

2017-05-01

Currently, non-renewable fossil energy dominates utilization of the world energy need for many applications. Efforts has been developed to find alternative renewable energy sources, due to fossil energy availability is diminishing. And one of renewable energy source is from biomass. The aim of this research is to determine characteristics of the Ampel bamboo (Bambusa vulgaris) as an energy potential of biomass. The Ampel bamboo’s characteristics possessed are evaluated based on its chemical composition; moisture, volatile, ash, and fixed carbon through proximate analysis; and also carbon, hydrogen and nitrogen content through ultimate analysis. From the Thermo-gravimetric analysis (TGA) indicates that Ampel bamboo contains of about 18.10% hemicelluloses, 47.75% cellulose and 18.86% lignin. While from the ultimate analysis results in the content of carbon, hydrogen, and Nitrogen of Ampel bamboo are 39.75%, 5.75% and 0% respectively. With such characteristics, it indicates that Ampel bamboo has an attractive potential as a renewable energy source.

Identifying characteristics and practices of multidisciplinary team reviews for patients with severe mental illness: a systematic review.

PubMed

Woody, Charlotte A; Baxter, Amanda J; Harris, Meredith G; Siskind, Dan J; Whiteford, Harvey A

2018-06-01

Multidisciplinary teams in mental health receive limited guidance, leading to inconsistent practices. We undertook a systematic review of the characteristics and practices of multidisciplinary team reviews for patients with severe mental illness or in relevant mental health service settings. Sources published since 2000 were located via academic database and web searches. Results were synthesised narratively. A total of 14 sources were analysed. Important characteristics and practices identified included routine monitoring and evaluation, good communication, equality between team members, and clear documentation practices. Success factors included defined leadership and clear team goals. Four sources described considerations for patients with complex clinical needs, including allocating sufficient time for discussion, maintaining connections with community providers, and ensuring culturally sensitive practices. No single best practice model was found, due to variations in team caseload, casemix, and resourcing levels. However, key ingredients for success were proposed. Sources were mostly descriptive; there remains a lack of evidence-based guidance regarding multidisciplinary team review characteristics and practices.

Effect of dietary selenium source (organic vs. mineral) and muscle pH on meat quality characteristics of pigs.

PubMed

Calvo, Luis; Toldrá, Fidel; Rodríguez, Ana I; López-Bote, Clemente; Rey, Ana I

2017-01-01

This study evaluates the effect of organic (Se-enriched yeast; SeY) versus inorganic selenium (sodium selenite; SeS) supplementation and the different response of selenium source according to muscle pH on pork meat quality characteristics. Pigs ( n  = 30) were fed the Se-supplemented diets (0.3 mg/kg) for 65 days. Neither electric conductivity (EC) nor drip loss were affected by the selenium source. The SeY group had lower TBARS in muscle samples after day 7 of refrigerated storage and higher a * values on days 1 and 7 than the SeS group. The effect of dietary selenium source on some meat quality characteristics was affected by muscle pH. Hence, as the muscle pH increases, the drip loss decreases but this effect is more marked with the dietary organic Se enrichment. Muscle pH seems to modulate the action of selenium in pork, especially some meat characteristics such as drip loss.

Analysis and suppression of passive noise in surface microseismic data

NASA Astrophysics Data System (ADS)

Forghani-Arani, Farnoush

Surface microseismic surveys are gaining popularity in monitoring the hydraulic fracturing process. The effectiveness of these surveys, however, is strongly dependent on the signal-to-noise ratio of the acquired data. Cultural and industrial noise generated during hydraulic fracturing operations usually dominate the data, thereby decreasing the effectiveness of using these data in identifying and locating microseismic events. Hence, noise suppression is a critical step in surface microseismic monitoring. In this thesis, I focus on two important aspects in using surface-recorded microseismic seismic data: first, I take advantage of the unwanted surface noise to understand the characteristics of these noise and extract information about the propagation medium from the noise; second, I propose effective techniques to suppress the surface noise while preserving the waveforms that contain information about the source of microseisms. Automated event identification on passive seismic data using only a few receivers is challenging especially when the record lengths span over long durations of time. I introduce an automatic event identification algorithm that is designed specifically for detecting events in passive data acquired with a small number of receivers. I demonstrate that the conventional STA/LTA (Short-term Average/Long-term Average) algorithm is not sufficiently effective in event detection in the common case of low signal-to-noise ratio. With a cross-correlation based method as an extension of the STA/LTA algorithm, even low signal-to-noise events (that were not detectable with conventional STA/LTA) were revealed. Surface microseismic data contains surface-waves (generated primarily from hydraulic fracturing activities) and body-waves in the form of microseismic events. It is challenging to analyze the surface-waves on the recorded data directly because of the randomness of their source and their unknown source signatures. I use seismic interferometry to extract the surface-wave arrivals. Interferometry is a powerful tool to extract waves (including body-wave and surface-waves) that propagate from any receiver in the array (called a pseudo source) to the other receivers across the array. Since most of the noise sources in surface microseismic data lie on the surface, seismic interferometry yields pseudo source gathers dominated by surface-wave energy. The dispersive characteristics of these surface-waves are important properties that can be used to extract information necessary for suppressing these waves. I demonstrate the application of interferometry to surface passive data recorded during the hydraulic fracturing operation of a tight gas reservoir and extract the dispersion properties of surface-waves corresponding to a pseudo-shot gather. Comparison of the dispersion characteristics of the surface waves from the pseudo-shot gather with that of an active shot-gather shows interesting similarities and differences. The dispersion character (e.g. velocity change with frequency) of the fundamental mode was observed to have the same behavior for both the active and passive data. However, for the higher mode surface-waves, the dispersion properties are extracted at different frequency ranges. Conventional noise suppression techniques in passive data are mostly stacking-based that rely on enforcing the amplitude of the signal by stacking the waveforms at the receivers and are unable to preserve the waveforms at the individual receivers necessary for estimating the microseismic source location and source mechanism. Here, I introduce a technique based on the tau - p transform, that effectively identifies and separates microseismic events from surface-wave noise in the tau -p domain. This technique is superior to conventional stacking-based noise suppression techniques, because it preserves the waveforms at individual receivers. Application of this methodology to microseismic events with isotropic and double-couple source mechanism, show substantial improvement in the signal-to-noise ratio. Imaging of the processed field data also show improved imaging of the hypocenter location of the microseismic source. In the case of double-couple source mechanism, I suggest two approaches for unifying the polarities at the receivers, a cross-correlation approach and a semblance-based prediction approach. The semblance-based approach is more effective at unifying the polarities, especially for low signal-to-noise ratio data.

Long Term 2 Second Round Source Water Monitoring and Bin Placement Memo

EPA Pesticide Factsheets

The Long Term 2 Enhanced Surface Water Treatment Rule (LT2ESWTR) applies to all public water systems served by a surface water source or public water systems served by a ground water source under the direct influence of surface water.

Uncertainty, variability, and earthquake physics in ground‐motion prediction equations

USGS Publications Warehouse

Baltay, Annemarie S.; Hanks, Thomas C.; Abrahamson, Norm A.

2017-01-01

Residuals between ground‐motion data and ground‐motion prediction equations (GMPEs) can be decomposed into terms representing earthquake source, path, and site effects. These terms can be cast in terms of repeatable (epistemic) residuals and the random (aleatory) components. Identifying the repeatable residuals leads to a GMPE with reduced uncertainty for a specific source, site, or path location, which in turn can yield a lower hazard level at small probabilities of exceedance. We illustrate a schematic framework for this residual partitioning with a dataset from the ANZA network, which straddles the central San Jacinto fault in southern California. The dataset consists of more than 3200 1.15≤M≤3 earthquakes and their peak ground accelerations (PGAs), recorded at close distances (R≤20  km). We construct a small‐magnitude GMPE for these PGA data, incorporating VS30 site conditions and geometrical spreading. Identification and removal of the repeatable source, path, and site terms yield an overall reduction in the standard deviation from 0.97 (in ln units) to 0.44, for a nonergodic assumption, that is, for a single‐source location, single site, and single path. We give examples of relationships between independent seismological observables and the repeatable terms. We find a correlation between location‐based source terms and stress drops in the San Jacinto fault zone region; an explanation of the site term as a function of kappa, the near‐site attenuation parameter; and a suggestion that the path component can be related directly to elastic structure. These correlations allow the repeatable source location, site, and path terms to be determined a priori using independent geophysical relationships. Those terms could be incorporated into location‐specific GMPEs for more accurate and precise ground‐motion prediction.

Transverse distribution of beam current oscillations of a 14 GHz electron cyclotron resonance ion source.

PubMed

Tarvainen, O; Toivanen, V; Komppula, J; Kalvas, T; Koivisto, H

2014-02-01

The temporal stability of oxygen ion beams has been studied with the 14 GHz A-ECR at JYFL (University of Jyvaskyla, Department of Physics). A sector Faraday cup was employed to measure the distribution of the beam current oscillations across the beam profile. The spatial and temporal characteristics of two different oscillation "modes" often observed with the JYFL 14 GHz ECRIS are discussed. It was observed that the low frequency oscillations below 200 Hz are distributed almost uniformly. In the high frequency oscillation "mode," with frequencies >300 Hz at the core of the beam, carrying most of the current, oscillates with smaller amplitude than the peripheral parts of the beam. The results help to explain differences observed between the two oscillation modes in terms of the transport efficiency through the JYFL K-130 cyclotron. The dependence of the oscillation pattern on ion source parameters is a strong indication that the mechanisms driving the fluctuations are plasma effects.

GPHS-RTG performance on the Galileo mission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hemler, R.J.; Cockfield, R.D.

The Galileo spacecraft, launched in October, 1989, is powered by two General Purpose Heat source-Radioisotope Thermoelectric Generator (GPHS-RTGs). These RTGs were designed, built, and tested by General Electric under contract from the Office of Special Applications of the Department of Energy (DOE). Isotope heat source installation and additional testing of these RTGs were performed at DOE's EG G Mound Facility in Miamisburg, Ohio. This paper provides a report on performance of the RTGs during launch and the early phases of the eight year Galileo mission.The effect of long term storage of the RTGs on power output, since the originally scheduledmore » launch data in May, 1986, will be dicussed, including the effects of helium buildup and subsequent purging with xenon. The RTGs performed as expected during the launch transient, met all specified power requirements for Beginning of Mission (BOM), and continue to follow prediced performance characteristics during the first year of the Galileo mission.« less

Human gingiva-derived mesenchymal stem cells are superior to bone marrow-derived mesenchymal stem cells for cell therapy in regenerative medicine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tomar, Geetanjali B.; Srivastava, Rupesh K.; Gupta, Navita

2010-03-12

Mesenchymal stem cells (MSCs) are capable of self-renewal and differentiation into multiple cell lineages. Presently, bone marrow is considered as a prime source of MSCs; however, there are some drawbacks and limitations in use of these MSCs for cell therapy. In this study, we demonstrate that human gingival tissue-derived MSCs have several advantages over bone marrow-derived MSCs. Gingival MSCs are easy to isolate, homogenous and proliferate faster than bone marrow MSCs without any growth factor. Importantly, gingival MSCs display stable morphology and do not loose MSC characteristic at higher passages. In addition, gingival MSCs maintain normal karyotype and telomerase activitymore » in long-term cultures, and are not tumorigenic. Thus, we reveal that human gingiva is a better source of MSCs than bone marrow, and large number of functionally competent clinical grade MSCs can be generated in short duration for cell therapy in regenerative medicine and tissue engineering.« less

A comparison of community response to aircraft noise at Toronto International and Oshawa Municipal airports†

NASA Astrophysics Data System (ADS)

Taylor, S. M.; Hall, F. L.; Birnie, S. E.

1981-07-01

Debate continues over the validity of a single dose-response relationship to describe annoyance due to transportation noise. Doubts about the appropriateness of a single relationship have centred primarily on the issue of differential response to the same noise level for different sources (e.g., aircraft, road traffic and trains). However, recent work suggests that response may vary for different types of the same source, namely aircraft, dependent upon the character, and specifically the number, of operations. Recent data collected around Toronto International and Oshawa Municipal airports permit a test of differences in four aggregate response variables. For the same NEF level, the percent at all annoyed at the two airports is not statistically different. The percent highly annoyed and the percent reporting speech interference are both significantly greater at Toronto but the percent reporting sleep interruption is greater at Oshawa. These differences can be explained in terms of the operational characteristics of the two airports.

Plasticity, Variability and Age in Second Language Acquisition and Bilingualism

PubMed Central

Birdsong, David

2018-01-01

Much of what is known about the outcome of second language acquisition and bilingualism can be summarized in terms of inter-individual variability, plasticity and age. The present review looks at variability and plasticity with respect to their underlying sources, and at age as a modulating factor in variability and plasticity. In this context we consider critical period effects vs. bilingualism effects, early and late bilingualism, nativelike and non-nativelike L2 attainment, cognitive aging, individual differences in learning, and linguistic dominance in bilingualism. Non-uniformity is an inherent characteristic of both early and late bilingualism. This review shows how plasticity and age connect with biological and experiential sources of variability, and underscores the value of research that reveals and explains variability. In these ways the review suggests how plasticity, variability and age conspire to frame fundamental research issues in L2 acquisition and bilingualism, and provides points of reference for discussion of the present Frontiers in Psychology Research Topic. PMID:29593590

Farmers' Willingness to Adopt Conservation Agriculture: New Evidence from Lebanon

NASA Astrophysics Data System (ADS)

Chalak, Ali; Irani, Alexandra; Chaaban, Jad; Bashour, Issam; Seyfert, Karin; Smoot, Kaitlyn; Abebe, Gumataw Kifle

2017-10-01

With increasing food insecurity and climate change, conservation agriculture has emerged as a sustainable alternative to intensive conventional agriculture as a source of food supply. Yet the adoption rate of conservation agriculture is still low. Our paper analyses the factors affecting farmers' willingness to adopt conservation agriculture in Lebanon. The findings show that household characteristics—years of farming and farm size affect conservation agriculture adoption. However, household characteristics alone were insufficient to explain conservation agriculture adoption. We found that farming experience, information sources, frequency of irrigation, and severity of weed infestation in the past, participation in specific trainings, and farmers' perception about the long-term impact of conservation agriculture, were key determinants of conservation agriculture adoption. Our paper encourages policymakers to invest in conservation agriculture to overcome food insecurity and environmental changes affecting food systems in the Middle East. The paper also informs agribusiness firms to view conservation agriculture as a viable alternative to strengthen their business relationship with farmers in arid and semi-arid regions.

FIRST LIGHT: MeV ASTROPHYSICS FROM THE MOON

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Richard S.; Lawrence, David J., E-mail: richard.s.miller@uah.edu

We report evidence of the first astrophysical source detected from the Moon at MeV energies. Our detection of Cygnus X-1 is a validation of a new investigative paradigm in which the lunar environment is intrinsic to the detection approach: the Lunar Occultation Technique (LOT). NASA’s Lunar Prospector mission served as a proxy for a dedicated LOT-based mission. The characteristic signature of temporal modulation, generated by repeated lunar occultations and encoded within acquired gamma-ray data (0.5–9 MeV), is consistent with an unambiguous detection of Cygnus X-1 at 5.4 σ significance. Source localization and long-term monitoring capabilities of the LOT are alsomore » demonstrated. This “first light” detection verifies the basic tenets of the LOT methodology, reinforces its feasibility as an alternative astronomical detection paradigm for nuclear astrophysics investigations, and is an illustration of the fundamental benefits of the Moon as a platform for science.« less

METHOD AND APPARATUS FOR THE DETECTION OF LEAKS IN PIPE LINES

DOEpatents

Jefferson, S.; Cameron, J.F.

1961-11-28

A method is described for detecting leaks in pipe lines carrying fluid. The steps include the following: injecting a radioactive solution into a fluid flowing in the line; flushing the line clear of the radioactive solution; introducing a detector-recorder unit, comprising a radioactivity radiation detector and a recorder which records the detector signal over a time period at a substantially constant speed, into the line in association with a go-devil capable of propelling the detector-recorder unit through the line in the direction of the fluid flow at a substantia1ly constant velocity; placing a series of sources of radioactivity at predetermined distances along the downstream part of the line to make a characteristic signal on the recorder record at intervals corresponding to the location of said sources; recovering the detector-recorder unit at a downstream point along the line; transcribing the recorder record of any radioactivity detected during the travel of the detector- recorder unit in terms of distance along the line. (AEC)

Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds

PubMed Central

Poojary, Mahesha M.; Barba, Francisco J.; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A.; Juliano, Pablo

2016-01-01

Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability. PMID:27879659

Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds.

PubMed

Poojary, Mahesha M; Barba, Francisco J; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A; Juliano, Pablo

2016-11-22

Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

Characterizing error distributions for MISR and MODIS optical depth data

NASA Astrophysics Data System (ADS)

Paradise, S.; Braverman, A.; Kahn, R.; Wilson, B.

2008-12-01

The Multi-angle Imaging SpectroRadiometer (MISR) and Moderate Resolution Imaging Spectroradiometer (MODIS) on NASA's EOS satellites collect massive, long term data records on aerosol amounts and particle properties. MISR and MODIS have different but complementary sampling characteristics. In order to realize maximum scientific benefit from these data, the nature of their error distributions must be quantified and understood so that discrepancies between them can be rectified and their information combined in the most beneficial way. By 'error' we mean all sources of discrepancies between the true value of the quantity of interest and the measured value, including instrument measurement errors, artifacts of retrieval algorithms, and differential spatial and temporal sampling characteristics. Previously in [Paradise et al., Fall AGU 2007: A12A-05] we presented a unified, global analysis and comparison of MISR and MODIS measurement biases and variances over lives of the missions. We used AErosol RObotic NETwork (AERONET) data as ground truth and evaluated MISR and MODIS optical depth distributions relative to AERONET using simple linear regression. However, AERONET data are themselves instrumental measurements subject to sources of uncertainty. In this talk, we discuss results from an improved analysis of MISR and MODIS error distributions that uses errors-in-variables regression, accounting for uncertainties in both the dependent and independent variables. We demonstrate on optical depth data, but the method is generally applicable to other aerosol properties as well.

Ethanol or bioelectricity? Life cycle assessment of lignocellulosic bioenergy use in light-duty vehicles.

PubMed

Luk, Jason M; Pourbafrani, Mohammad; Saville, Bradley A; MacLean, Heather L

2013-09-17

Our study evaluates life cycle energy use and GHG emissions of lignocellulosic ethanol and bioelectricity use in U.S. light-duty vehicles. The well-to-pump, pump-to-wheel, and vehicle cycle stages are modeled. All ethanol (E85) and bioelectricity pathways have similar life cycle fossil energy use (~ 100 MJ/100 vehicle kilometers traveled (VKT)) and net GHG emissions (~5 kg CO2eq./100 VKT), considerably lower (65-85%) than those of reference gasoline and U.S. grid-electricity pathways. E85 use in a hybrid vehicle and bioelectricity use in a fully electric vehicle also have similar life cycle biomass and total energy use (~ 350 and ~450 MJ/100 VKT, respectively); differences in well-to-pump and pump-to-wheel efficiencies can largely offset each other. Our energy use and net GHG emissions results contrast with findings in literature, which report better performance on these metrics for bioelectricity compared to ethanol. The primary source of differences in the studies is related to our development of pathways with comparable vehicle characteristics. Ethanol or vehicle electrification can reduce petroleum use, while bioelectricity may displace nonpetroleum energy sources. Regional characteristics may create conditions under which either ethanol or bioelectricity may be the superior option; however, neither has a clear advantage in terms of GHG emissions or energy use.

Pressure pulsations in piping system excited by a centrifugal turbomachinery taking the damping characteristics into consideration

NASA Astrophysics Data System (ADS)

Hayashi, I.; Kaneko, S.

2014-02-01

Pressure pulsations excited by a centrifugal turbomachinery such as compressor, fan or pump at the blade passing frequency may cause severe noise and vibrations in piping system. Therefore, the practical evaluation method of pressure pulsations is strongly recommended. In particular, the maximum pressure amplitude under the resonant conditions should be appropriately evaluated. In this study, a one-dimensional excitation source model for a compressor or pump is introduced based on the equation of motion, so as to incorporate the non-linear damping proportional to velocity squared in the total piping system including the compressor or pump. The damping characteristics of the compressor or pump are investigated by using the semi-empirical model. It is shown that the resistance coefficient of the compressor or pump depends on the Reynolds number that is defined using the equivalent velocity of the pulsating flow. The frequency response of the pressure amplitude and the pressure distribution in the piping system can be evaluated by introducing the equivalent resistance of the compressor or pump and that of piping system. In particular, the relation of the maximum pressure amplitude in piping system to the location of the excitation source under resonant conditions can be evaluated. Finally, the reduction of the pressure pulsations by use of an orifice plate is discussed in terms of the pulsation energy loss.

36 CFR 294.44 - Prohibition on linear construction zones.

Code of Federal Regulations, 2013 CFR

2013-07-01

... zone will not diminish, over the long-term, conditions in the water influence zone and the extent of... diminish, over the long-term, roadless area characteristics; and (6) That watershed conservation practices... area characteristics over the long-term. Upon completion of the installation of a linear facility via...

36 CFR 294.44 - Prohibition on linear construction zones.

Code of Federal Regulations, 2014 CFR

2014-07-01

... zone will not diminish, over the long-term, conditions in the water influence zone and the extent of... diminish, over the long-term, roadless area characteristics; and (6) That watershed conservation practices... area characteristics over the long-term. Upon completion of the installation of a linear facility via...

Interlaboratory study of the ion source memory effect in 36Cl accelerator mass spectrometry

NASA Astrophysics Data System (ADS)

Pavetich, Stefan; Akhmadaliev, Shavkat; Arnold, Maurice; Aumaître, Georges; Bourlès, Didier; Buchriegler, Josef; Golser, Robin; Keddadouche, Karim; Martschini, Martin; Merchel, Silke; Rugel, Georg; Steier, Peter

2014-06-01

Understanding and minimization of contaminations in the ion source due to cross-contamination and long-term memory effect is one of the key issues for accurate accelerator mass spectrometry (AMS) measurements of volatile elements. The focus of this work is on the investigation of the long-term memory effect for the volatile element chlorine, and the minimization of this effect in the ion source of the Dresden accelerator mass spectrometry facility (DREAMS). For this purpose, one of the two original HVE ion sources at the DREAMS facility was modified, allowing the use of larger sample holders having individual target apertures. Additionally, a more open geometry was used to improve the vacuum level. To evaluate this improvement in comparison to other up-to-date ion sources, an interlaboratory comparison had been initiated. The long-term memory effect of the four Cs sputter ion sources at DREAMS (two sources: original and modified), ASTER (Accélérateur pour les Sciences de la Terre, Environnement, Risques) and VERA (Vienna Environmental Research Accelerator) had been investigated by measuring samples of natural 35Cl/37Cl-ratio and samples highly-enriched in 35Cl (35Cl/37Cl ∼ 999). Besides investigating and comparing the individual levels of long-term memory, recovery time constants could be calculated. The tests show that all four sources suffer from long-term memory, but the modified DREAMS ion source showed the lowest level of contamination. The recovery times of the four ion sources were widely spread between 61 and 1390 s, where the modified DREAMS ion source with values between 156 and 262 s showed the fastest recovery in 80% of the measurements.

GIS-based multielement source analysis of dustfall in Beijing: A study of 40 major and trace elements.

PubMed

Luo, Nana; An, Li; Nara, Atsushi; Yan, Xing; Zhao, Wenji

2016-06-01

Dust, as an important carrier of inorganic and organic pollutants, daily exposes to human without any protection. It affects our health adversely, especially its chemical elements and ions. In this research, we investigated the chemical characteristics of dustfall in Beijing, specifically in terms of 40 major and trace elements, and presented semi-quantitative evaluations of the relative local and remote contributions. In total, 58 samples were collected in Beijing and nearby cities during 2013-2014 "the winter heating period". Using multiple statistical methods and GIS techniques, we obtained the relative similarities among certain elements and identified their pollution sources (from local or nearby cities). And more interestingly, the relative contributions of nearby cities can be calculated by the Hysplit4 backward-trajectory model. In addition, the correlation analysis for the 40 elements in dust and soil indicated that traffic restricted interchange between them; the city center, with the heaviest traffic, had the most significant influence. Finally, the resulting source apportionment was examined and modified using land use data and terrain information. We hope it can provide a strong basis for the environmental protection and risk assessment. Copyright © 2016 Elsevier Ltd. All rights reserved.

Low-frequency source parameters of twelve large earthquakes. M.S. Thesis

NASA Technical Reports Server (NTRS)

Harabaglia, Paolo

1993-01-01

A global survey of the low-frequency (1-21 mHz) source characteristics of large events are studied. We are particularly interested in events unusually enriched in low-frequency and in events with a short-term precursor. We model the source time function of 12 large earthquakes using teleseismic data at low frequency. For each event we retrieve the source amplitude spectrum in the frequency range between 1 and 21 mHz with the Silver and Jordan method and the phase-shift spectrum in the frequency range between 1 and 11 mHz with the Riedesel and Jordan method. We then model the source time function by fitting the two spectra. Two of these events, the 1980 Irpinia, Italy, and the 1983 Akita-Oki, Japan, are shallow-depth complex events that took place on multiple faults. In both cases the source time function has a length of about 100 seconds. By comparison Westaway and Jackson find 45 seconds for the Irpinia event and Houston and Kanamori about 50 seconds for the Akita-Oki earthquake. The three deep events and four of the seven intermediate-depth events are fast rupturing earthquakes. A single pulse is sufficient to model the source spectra in the frequency range of our interest. Two other intermediate-depth events have slower rupturing processes, characterized by a continuous energy release lasting for about 40 seconds. The last event is the intermediate-depth 1983 Peru-Ecuador earthquake. It was first recognized as a precursive event by Jordan. We model it with a smooth rupturing process starting about 2 minutes before the high frequency origin time superimposed to an impulsive source.

Community Junior College Faculty: Needs, Characteristics, and Sources.

ERIC Educational Resources Information Center

Wurster, Stanley R.

The growing need for junior college teachers stimulated this examination of teacher characteristics and potential sources of new teachers. Since junior colleges will receive an increasing share of the nation's college enrollment, junior colleges must attract qualified faculty members. The literature on junior college faculty characteristics…

Semi-implicit and fully implicit shock-capturing methods for hyperbolic conservation laws with stiff source terms

NASA Technical Reports Server (NTRS)

Yee, H. C.; Shinn, J. L.

1986-01-01

Some numerical aspects of finite-difference algorithms for nonlinear multidimensional hyperbolic conservation laws with stiff nonhomogenous (source) terms are discussed. If the stiffness is entirely dominated by the source term, a semi-implicit shock-capturing method is proposed provided that the Jacobian of the soruce terms possesses certain properties. The proposed semi-implicit method can be viewed as a variant of the Bussing and Murman point-implicit scheme with a more appropriate numerical dissipation for the computation of strong shock waves. However, if the stiffness is not solely dominated by the source terms, a fully implicit method would be a better choice. The situation is complicated by problems that are higher than one dimension, and the presence of stiff source terms further complicates the solution procedures for alternating direction implicit (ADI) methods. Several alternatives are discussed. The primary motivation for constructing these schemes was to address thermally and chemically nonequilibrium flows in the hypersonic regime. Due to the unique structure of the eigenvalues and eigenvectors for fluid flows of this type, the computation can be simplified, thus providing a more efficient solution procedure than one might have anticipated.

Common Calibration Source for Monitoring Long-term Ozone Trends

NASA Technical Reports Server (NTRS)

Kowalewski, Matthew

2004-01-01

Accurate long-term satellite measurements are crucial for monitoring the recovery of the ozone layer. The slow pace of the recovery and limited lifetimes of satellite monitoring instruments demands that datasets from multiple observation systems be combined to provide the long-term accuracy needed. A fundamental component of accurately monitoring long-term trends is the calibration of these various instruments. NASA s Radiometric Calibration and Development Facility at the Goddard Space Flight Center has provided resources to minimize calibration biases between multiple instruments through the use of a common calibration source and standardized procedures traceable to national standards. The Facility s 50 cm barium sulfate integrating sphere has been used as a common calibration source for both US and international satellite instruments, including the Total Ozone Mapping Spectrometer (TOMS), Solar Backscatter Ultraviolet 2 (SBUV/2) instruments, Shuttle SBUV (SSBUV), Ozone Mapping Instrument (OMI), Global Ozone Monitoring Experiment (GOME) (ESA), Scanning Imaging SpectroMeter for Atmospheric ChartographY (SCIAMACHY) (ESA), and others. We will discuss the advantages of using a common calibration source and its effects on long-term ozone data sets. In addition, sphere calibration results from various instruments will be presented to demonstrate the accuracy of the long-term characterization of the source itself.

Watershed nitrogen and phosphorus balance: The upper Potomac River basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jaworski, N.A.; Groffman, P.M.; Keller, A.A.

1992-01-01

Nitrogen and phosphorus mass balances were estimated for the portion of the Potomac River basin watershed located above Washington, D.C. The total nitrogen (N) balance included seven input source terms, six sinks, and one 'change-in-storage' term, but was simplified to five input terms and three output terms. The phosphorus (P) baance had four input and three output terms. The estimated balances are based on watershed data from seven information sources. Major sources of nitrogen are animal waste and atmospheric deposition. The major sources of phosphorus are animal waste and fertilizer. The major sink for nitrogen is combined denitrification, volatilization, andmore » change-in-storage. The major sink for phosphorus is change-in-storage. River exports of N and P were 17% and 8%, respectively, of the total N and P inputs. Over 60% of the N and P were volatilized or stored. The major input and output terms on the budget are estimated from direct measurements, but the change-in-storage term is calculated by difference. The factors regulating retention and storage processes are discussed and research needs are identified.« less

Bacteriological assessment of urban water sources in Khamis Mushait Governorate, southwestern Saudi Arabia.

PubMed

AlOtaibi, Eed L Sh

2009-03-21

Urban water sources of Khamis Mushait Governorate, southwestern Saudi Arabia, were studied to assess their bacteriological characteristics and suitability for potable purposes. A cross-sectional epidemiological method was adopted to investigate the four main urban water sources (i.e. bottled, desalinated, surface, and well water). These were sampled and examined between February and June 2007. A total of 95 water samples from bottled, desalinated, surface, and well water were collected randomly from the study area using different gathering and analysing techniques. The bacteriological examination of water samples included the most probable number of presumptive coliforms, faecal coliforms, and faecal streptococci (MPN/100 ml). The results showed that the total coliform count (MPN/100 ml) was not detected in any samples taken from bottled water, while it was detected in those taken from desalinated, surface, and well water: percentages were 12.9, 80.0, and 100.0, respectively. Faecal coliforms were detected in desalinated, surface, and well water, with percentages of 3.23, 60.0 and 87.88, respectively. About 6.45% of desalinated water, 53.33% of surface water, and 57.58% of well water was found positive for faecal streptococci. Colonies of coliforms were identified in different micro-organisms with various percentages. Water derived from traditional sources (wells) showed increases in most of the investigated bacteriological parameters, followed by surface water as compared to bottled or desalinated water. This may be attributed to the fact that well and surface water are at risk of contamination as indicated by the higher levels of most bacteriological parameters. Moreover, well water is exposed to point sources of pollution such as septic wells and domestic and farming effluents, as well as to soil with a high humus content. The lower bacteriological characteristics in samples from bottled water indicate that it is satisfactory for human drinking purposes. Contamination of desalinated water that is the main urban water source may occur during transportation from the desalination plant or in the house reservoir of the consumer. Improving and expanding the existing water treatment and sanitation systems is more likely to provide safe and sustainable sources of water over the long term. Strict hygienic measures should be applied to improve water quality and to avoid deleterious effects on public health, by using periodical monitoring programmes to detect sewage pollution running over local hydrological networks and valleys.

Bacteriological assessment of urban water sources in Khamis Mushait Governorate, southwestern Saudi Arabia

PubMed Central

Sh AlOtaibi, Eed L

2009-01-01

Background Urban water sources of Khamis Mushait Governorate, southwestern Saudi Arabia, were studied to assess their bacteriological characteristics and suitability for potable purposes. A cross-sectional epidemiological method was adopted to investigate the four main urban water sources (i.e. bottled, desalinated, surface, and well water). These were sampled and examined between February and June 2007. Results A total of 95 water samples from bottled, desalinated, surface, and well water were collected randomly from the study area using different gathering and analysing techniques. The bacteriological examination of water samples included the most probable number of presumptive coliforms, faecal coliforms, and faecal streptococci (MPN/100 ml). The results showed that the total coliform count (MPN/100 ml) was not detected in any samples taken from bottled water, while it was detected in those taken from desalinated, surface, and well water: percentages were 12.9, 80.0, and 100.0, respectively. Faecal coliforms were detected in desalinated, surface, and well water, with percentages of 3.23, 60.0 and 87.88, respectively. About 6.45% of desalinated water, 53.33% of surface water, and 57.58% of well water was found positive for faecal streptococci. Colonies of coliforms were identified in different micro-organisms with various percentages. Conclusion Water derived from traditional sources (wells) showed increases in most of the investigated bacteriological parameters, followed by surface water as compared to bottled or desalinated water. This may be attributed to the fact that well and surface water are at risk of contamination as indicated by the higher levels of most bacteriological parameters. Moreover, well water is exposed to point sources of pollution such as septic wells and domestic and farming effluents, as well as to soil with a high humus content. The lower bacteriological characteristics in samples from bottled water indicate that it is satisfactory for human drinking purposes. Contamination of desalinated water that is the main urban water source may occur during transportation from the desalination plant or in the house reservoir of the consumer. Improving and expanding the existing water treatment and sanitation systems is more likely to provide safe and sustainable sources of water over the long term. Strict hygienic measures should be applied to improve water quality and to avoid deleterious effects on public health, by using periodical monitoring programmes to detect sewage pollution running over local hydrological networks and valleys. PMID:19302710

Patient Characteristics and Outcomes in Institutional and Community Long-Term Care.

ERIC Educational Resources Information Center

Braun, Kathryn L.; And Others

1991-01-01

Examined three-way relationships among patient characteristics, type of care (admission to nursing home or community setting), and 6-month outcomes of 352 long-term care patients. Found that patient characteristics influenced type of care received and that substantial portions of variance in outcomes were attributable to initial differences among…

Characteristics of water quality of rivers related to land-use in Penang Island Malaysia

NASA Astrophysics Data System (ADS)

Yen, Lim Jia; Matsumoto, Yoshitaka; Yin, Chee Su; Wern, Hong Chern; Inoue, Takanobu; Usami, Akiko; Iwatsuki, Eiji; Yagi, Akihiko

2017-10-01

A study of the Water Quality Index (WQI) of rivers in Penang Island, Malaysia conducted by Universiti Sains Malaysia from October 2012 to January 2013 shows that almost all rivers in Penang Island were slightly polluted or polluted. However, WQI does not clarify each water quality indices, for example nutrients and organic pollutants, that reflect the land-use and pollution source in the catchment. Therefore, in this research, the main objectives are to investigate the interaction of land-use and the water quality of rivers in Penang Island, the quantity of pollutant loads discharged, and identification of the pollution sources along the rivers. The procedure starts from the selection of rivers and parameters for investigation, carrying out field survey and sampling, measuring and analyzing each sample, and lastly, providing a conclusion. The three rivers selected are Pinang River, Keluang River and Burung River. In this research, the results show that total organic carbon (TOC) increases generally as the rivers flow towards the river mouths, which means the degree of organic pollution increases along the rivers. In Pinang River, TOC increases as the tributaries from housing areas flow into the mainstream whereas in Keluang River, a marked increase of TOC is shown in the location where the wastewater from a sewage treatment plant discharges. In Burung River, TOC increases as the river flows through the paddy fields. In the principal component analysis, all sampling points of the three rivers are able to be classified into five groups based on the characteristics of water quality. For example, upstream of Keluang River and Burung River show mutual characteristics in terms of man-made pollution index and heavy metal pollution index. As a conclusion, the results in this research show that the characteristics of water quality in Penang Island are highly affected by land-use surrounding the rivers.

The influence of organizational characteristics on employee solidarity in the long-term care sector

PubMed Central

Cramm, Jane M; Strating, Mathilde MH; Nieboer, Anna P

2013-01-01

Aim This article is a report of a study that identifies organizational characteristics explaining employee solidarity in the long-term care sector. Background Employee solidarity reportedly improves organizations’ effectiveness and efficiency. Although general research on solidarity in organizations is available, the impact of the organizational context on solidarity in long-term care settings is lacking. Design Cross-sectional survey. Method The study was carried out in Dutch long-term care. A total of 313 nurses, managers and other care professionals in 23 organizations were involved. Organizational characteristics studied were centralization, hierarchical culture, formal and informal exchange of information and leadership style. The study was carried out in 2009. Findings All organizational characteristics significantly correlated with employee solidarity in the univariate analyses. In the multivariate analyses hierarchical culture, centralization, exchange of formal and informal information and transformational leadership appears to be important for solidarity among nurses, managers and other professionals in long-term care organizations, but not transactional and passive leadership styles. Conclusion The study increased our knowledge of solidarity among nurses, managers and other professionals in the long-term care settings. Organizational characteristics that enhance solidarity are high levels of formal and informal information exchange, less hierarchical authority, decentralization and transformational leadership styles. PMID:22551056

The influence of organizational characteristics on employee solidarity in the long-term care sector.

PubMed

Cramm, Jane M; Strating, Mathilde M H; Nieboer, Anna P

2013-03-01

This article is a report of a study that identifies organizational characteristics explaining employee solidarity in the long-term care sector. Employee solidarity reportedly improves organizations' effectiveness and efficiency. Although general research on solidarity in organizations is available, the impact of the organizational context on solidarity in long-term care settings is lacking. Cross-sectional survey. The study was carried out in Dutch long-term care. A total of 313 nurses, managers and other care professionals in 23 organizations were involved. Organizational characteristics studied were centralization, hierarchical culture, formal and informal exchange of information and leadership style. The study was carried out in 2009. Findings.  All organizational characteristics significantly correlated with employee solidarity in the univariate analyses. In the multivariate analyses hierarchical culture, centralization, exchange of formal and informal information and transformational leadership appears to be important for solidarity among nurses, managers and other professionals in long-term care organizations, but not transactional and passive leadership styles. The study increased our knowledge of solidarity among nurses, managers and other professionals in the long-term care settings. Organizational characteristics that enhance solidarity are high levels of formal and informal information exchange, less hierarchical authority, decentralization and transformational leadership styles. © 2012 Blackwell Publishing Ltd.

Potency testing of mesenchymal stromal cell growth expanded in human platelet lysate from different human tissues.

PubMed

Fazzina, R; Iudicone, P; Fioravanti, D; Bonanno, G; Totta, P; Zizzari, I G; Pierelli, L

2016-08-25

Mesenchymal stromal cells (MSCs) have been largely investigated, in the past decade, as potential therapeutic strategies for various acute and chronic pathological conditions. MSCs isolated from different sources, such as bone marrow (BM), umbilical cord tissue (UCT) and adipose tissue (AT), share many biological features, although they may show some differences on cumulative yield, proliferative ability and differentiation potential. The standardization of MSCs growth and their functional amplification is a mandatory objective of cell therapies. The aim of this study was to evaluate the cumulative yield and the ex vivo amplification potential of MSCs obtained from various sources and different subjects, using defined culture conditions with a standardized platelet lysate (PL) as growth stimulus. MSCs isolated from BM, UCT and AT and expanded in human PL were compared in terms of cumulative yield and growth potential per gram of starting tissue. MSCs morphology, phenotype, differentiation potential, and immunomodulatory properties were also investigated to evaluate their biological characteristics. The use of standardized PL-based culture conditions resulted in a very low variability of MSC growth. Our data showed that AT has the greater capacity to generate MSC per gram of initial tissue, compared to BM and UCT. However, UCT-MSCs replicated faster than AT-MSCs and BM-MSCs, revealing a greater proliferation capacity of this source irrespective of its lower MSC yield. All MSCs exhibited the typical MSC phenotype and the ability to differentiate into all mesodermal lineages, while BM-MSCs showed the most prominent immunosuppressive effect in vitro. The adoption of standardized culture conditions may help researchers and clinicians to reveal particular characteristics and inter-individual variability of MSCs sourced from different tissues. These data will be beneficial to set the standards for tissue collection and MSCs clinical-scale expansion both for cell banking and for cell-based therapy settings.

Philanthropy in health professions education research: determinants of success.

PubMed

Paul, Robert; Hollenberg, Elisa; Hodges, Brian D

2017-05-01

Fund-raising is a new practice in medical education research. This qualitative study explores a cross-sectional analysis of philanthropy in medical education in Canada and Europe and identifies some common characteristics in the fund-raising system, key roles and characteristics of research sites that have had success. Medical education research sites that had received donations greater than Can$100 000 were identified by searching publicly available sources. Interviews were conducted with 25 individuals from these and other sites, in four categories: medical education leaders (n = 9); philanthropy-supported chairholders and researchers (n = 5); donors of over Can$100 000 (n = 7), and advancement professionals (n = 4). Interview transcripts were inductively coded to identify themes. Five factors associated with success in accessing philanthropic sources were identified in the sample: support of the organisation's senior leadership; a charismatic champion who motivates donors; access to an advancement office or foundation; impetus to find funds beyond traditional operating budgets, and understanding of the conceptual and practical dimensions of fund-raising. Three types of donor (medical education insider, donor collective and general philanthropist), four faculty roles (trailblazers, rock stars, 'Who? Me?' people and future fund-raisers) and six stages in the fund-raising cycle were also identified. Philanthropy is a source of funding with the potential to significantly advance education research. Yet competence in fund-raising is not widely developed among medical education research leaders. Successful accessing of philanthropic sources of funding requires the ability to articulate the impact of philanthropy in medical education research in a way that will interest donors. This appears to be challenging for medical education leaders, who tend to frame their work in academic terms and have trouble competing against other fund-raising domains. Medical education research institutes and centres will benefit from developing greater understanding of the conception and practices of fund-raising. © 2017 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Chemical Characteristics of Organic Aerosols in Shanghai: A Study by Ultrahigh-Performance Liquid Chromatography Coupled With Orbitrap Mass Spectrometry

NASA Astrophysics Data System (ADS)

Wang, Xinke; Hayeck, Nathalie; Brüggemann, Martin; Yao, Lei; Chen, Hangfei; Zhang, Ci; Emmelin, Corinne; Chen, Jianmin; George, Christian; Wang, Lin

2017-11-01

Particulate matter 2.5 (PM2.5) filter samples were collected in July and October 2014 and January and April 2015 in urban Shanghai and analyzed using ultrahigh-performance liquid chromatography coupled to Orbitrap mass spectrometry. The measured chromatogram-mass spectra were processed by a nontarget screening approach to identify significant signals. In total, 810-1,510 chemical formulas of organic compounds in the negative polarity (negative electrospray ionization (ESI-)) and 860-1,790 in the positive polarity (ESI+), respectively, were determined. The chemical characteristics of organic aerosols (OAs) in Shanghai varied among different months and between daytime and nighttime. In the January samples, organics were generally richer in terms of both number and abundance, whereas those in the July samples were far lower. More CHO- (compounds containing only carbon, hydrogen, and oxygen and detected in ESI-) and CHOS- (sulfur-containing organics) were found in the daytime samples, suggesting a photochemical source, whereas CHONS- (nitrogen- and sulfur-containing organics) were more abundant in the nighttime samples, due to nocturnal nitrate radical chemistry. A significant number of monocyclic and polycyclic aromatic compounds, and nitrogen- and sulfur-containing heterocyclic compounds, were detected in all samples, indicating that biomass burning and fossil fuel combustion made important contributions to the OAs in urban Shanghai. Additionally, precursor-product pair analysis indicates that the epoxide pathway is an important formation route for organosulfates observed in Shanghai. Moreover, a similar analysis suggests that 35-57% of nitrogen-containing compounds detected in ESI+ could be formed through reactions between ammonia and carbonyls. Our study presents a comprehensive overview of OAs in urban Shanghai, which helps to understand their characteristics and sources.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, T.P.

Sensors for the determination of pH have been developed which are based on the immobilization of direct dyes at hydrolyzed cellulosic films. The performance and structural characteristics of the sensors were investigated by a variety of spectroscopic methods, and applications for remote sensing were developed. Films of cellulose acetate were base hydrolyzed in 0.07 M KOH to yield a porous support structure. The structural changes resulting from the hydrolysis on cellulose acetate were probed with infrared internal reflectance spectroscopy. The progress of the hydrolysis reaction was monitored by the changes in vibrational modes of the acetyl group, and other spectralmore » changes indicated changes in film thickness as a result of solvent incorporation. Direct dyes, including Congo Red and C. I. Direct Blue 8, were then immobilized at these porous cellulosic films. The optical response characteristics of the Congo Red pH sensor were characterized, including the UV-visible absorption spectra as a function of pH, the response time as a function of ionic strength and ionic size of electrolyte, the long-term stability of the sensor, the effects of metal-ion interference, and the concentration of Congo Red in the polymer film. The structural characteristics of the sensor were investigated by internal reflectance spectroscopy and resonance-enhanced Raman spectroscopy, and the protonation sites were identified as the two azo groups of Congo Red. Infrared internal reflection spectra of immobilized Congo Red led to the development of a sensor for pH based on infrared spectroscopy. Finally, a two-wavelength fiber-optic photometer, which is based on solid-state sources and detectors, and a fiber-optic photometer, which is based on solid-state sources and detectors, and a fiber-optic probe were developed for pH determinations using Congo Red and C. I. Direct Blue 8 pH sensors.« less

Long-term primary culture of mouse mammary tumor cells: production of virus.

PubMed

Young, L J; Cardiff, R D; Ashley, R L

1975-05-01

Long-term primary cultures of mouse mammary tumor cells proved an excellent source of mouse mammary tumor virus (MMTV). Virus purified from these primary cultures had the same morphologic biochemical, immunologic, and biologic characteristics as MMTV. Quantitation of MMTV-protein equivalents released into the medium was measured by the radioimmunoassay for MMTV. Peak production levels were 20-40 mug MMTV protien equivalents/75-cm-2 flask/24 hours. These cultures produced MMTV for as long as 90 days. MMTV cultivation depended on the initial cell-plating density and hormones. Maximal MMTV release was obtained at a plating density of 1 times 10-6 cells/cm-2 in the presence of insulin and hydrocortisone. Insulin alone gave basal levels of MMTV, and hydrocortisone alone increased MMTV release only three-fold, but insulin and hydrocortisone together effected an eightfold increase in MMTV release. This suggested that hydrocortisone had a primary effect on MMTV release and insulin acted synergistically with hydrocortisone to maximize MMTV release.

Variable distributional characteristics of substrate utilization patterns in activated sludge plants in Kuwait.

PubMed

Al-Mutairi, N Z

2009-02-01

The objective of this study was to determine the magnitude of microbial functional potential and community structure between three different WWTPs using the Lorenz curve method and to find the effect of seasonal variation on patterns of substrate utilization. Lorenz curve method was sensitive enough to detect short-term changes in microbial functional diversity between Riqqa, Umm Al-Haiman and Al-Jahra activated sludge systems and showed seasonal variations of the utilized carbon sources. Gini coefficient ranged from 0.21 to 0.8. Lorenz curves seemed particularly suitable to present microbial heterogeneity in term of inequality and to highlight the relative contribution of low-and high functional diversity for the three different types of mixed liquors. Correlation analysis of the experimental data show that the complement of the Gini coefficient was strongly and positively correlated with the Shannon index (r(xy)=0.89), evenness (r(xy)=0.91), and AWCD (r(xy)=0.95) at the 95% level of significance (alpha=0.05).

Family Structure and Long-Term Care Insurance Purchase

PubMed Central

Van Houtven, Courtney Harold; Coe, Norma B.; Konetzka, R. Tamara

2015-01-01

While it has long been assumed that family structure and potential sources of informal care play a large role in the purchase decisions for long-term care insurance (LTCI), current empirical evidence is inconclusive. Our study examines the relationship between family structure and LTCI purchase and addresses several major limitations of the prior literature by using a long panel of data and considering modern family relationships, such as presence of stepchildren. We find that family structure characteristics from one’s own generation, particularly about one’s spouse, are associated with purchase, but that few family structure attributes from the younger generation have an influence. Family factors that may indicate future caregiver supply are negatively associated with purchase: having a coresidential child, signaling close proximity, and having a currently working spouse, signaling a healthy and able spouse, that LTC planning has not occurred yet, or that there is less need for asset protection afforded by LTCI. Dynamic factors, such as increasing wealth or turning 65, are associated with higher likelihood of LTCI purchase. PMID:25760583

Efficient Development of High Fidelity Structured Volume Grids for Hypersonic Flow Simulations

NASA Technical Reports Server (NTRS)

Alter, Stephen J.

2003-01-01

A new technique for the control of grid line spacing and intersection angles of a structured volume grid, using elliptic partial differential equations (PDEs) is presented. Existing structured grid generation algorithms make use of source term hybridization to provide control of grid lines, imposing orthogonality implicitly at the boundary and explicitly on the interior of the domain. A bridging function between the two types of grid line control is typically used to blend the different orthogonality formulations. It is shown that utilizing such a bridging function with source term hybridization can result in the excessive use of computational resources and diminishes robustness. A new approach, Anisotropic Lagrange Based Trans-Finite Interpolation (ALBTFI), is offered as a replacement to source term hybridization. The ALBTFI technique captures the essence of the desired grid controls while improving the convergence rate of the elliptic PDEs when compared with source term hybridization. Grid generation on a blunt cone and a Shuttle Orbiter is used to demonstrate and assess the ALBTFI technique, which is shown to be as much as 50% faster, more robust, and produces higher quality grids than source term hybridization.

BWR ASSEMBLY SOURCE TERMS FOR WASTE PACKAGE DESIGN

DOE Office of Scientific and Technical Information (OSTI.GOV)

T.L. Lotz

1997-02-15

This analysis is prepared by the Mined Geologic Disposal System (MGDS) Waste Package Development Department (WPDD) to provide boiling water reactor (BWR) assembly radiation source term data for use during Waste Package (WP) design. The BWR assembly radiation source terms are to be used for evaluation of radiolysis effects at the WP surface, and for personnel shielding requirements during assembly or WP handling operations. The objectives of this evaluation are to generate BWR assembly radiation source terms that bound selected groupings of BWR assemblies, with regard to assembly average burnup and cooling time, which comprise the anticipated MGDS BWR commercialmore » spent nuclear fuel (SNF) waste stream. The source term data is to be provided in a form which can easily be utilized in subsequent shielding/radiation dose calculations. Since these calculations may also be used for Total System Performance Assessment (TSPA), with appropriate justification provided by TSPA, or radionuclide release rate analysis, the grams of each element and additional cooling times out to 25 years will also be calculated and the data included in the output files.« less

Characteristics and sensitivity analysis of multiple-time-resolved source patterns of PM2.5 with real time data using Multilinear Engine 2

NASA Astrophysics Data System (ADS)

Peng, Xing; Shi, Guo-Liang; Gao, Jian; Liu, Jia-Yuan; HuangFu, Yan-Qi; Ma, Tong; Wang, Hai-Ting; Zhang, Yue-Chong; Wang, Han; Li, Hui; Ivey, Cesunica E.; Feng, Yin-Chang

2016-08-01

With real time resolved data of Particulate matter (PM) and chemical species, understanding the source patterns and chemical characteristics is critical to establish controlling of PM. In this work, PM2.5 and chemical species were measured by corresponding online instruments with 1-h time resolution in Beijing. Multilinear Engine 2 (ME2) model was applied to explore the sources, and four sources (vehicle emission, crustal dust, secondary formation and coal combustion) were identified. To investigate the sensitivity of time resolution on the source contributions and chemical characteristics, ME2 was conducted with four time resolution runs (1-h, 2-h, 4-h, and 8-h). Crustal dust and coal combustion display large variation in the four time resolutions runs, with their contributions ranging from 6.7 to 10.4 μg m-3 and from 6.4 to 12.2 μg m-3, respectively. The contributions of vehicle emission and secondary formation range from 7.5 to 10.5 and from 14.7 to 16.7 μg m-3, respectively. The sensitivity analyses were conducted by principal component analysis-plot (PCA-plot), coefficient of divergence (CD), average absolute error (AAE) and correlation coefficients. For the four time resolution runs, the source contributions and profiles of crustal dust and coal combustion were more unstable than other source categories, possibly due to the lack of key markers of crustal dust and coal combustion (e.g. Si, Al). On the other hand, vehicle emission and crustal dust were more sensitive to time series of source contributions at different time resolutions. Findings in this study can improve our knowledge of source contributions and chemical characteristics at different time solutions.

Fractal Complexity-Based Feature Extraction Algorithm of Communication Signals

NASA Astrophysics Data System (ADS)

Wang, Hui; Li, Jingchao; Guo, Lili; Dou, Zheng; Lin, Yun; Zhou, Ruolin

How to analyze and identify the characteristics of radiation sources and estimate the threat level by means of detecting, intercepting and locating has been the central issue of electronic support in the electronic warfare, and communication signal recognition is one of the key points to solve this issue. Aiming at accurately extracting the individual characteristics of the radiation source for the increasingly complex communication electromagnetic environment, a novel feature extraction algorithm for individual characteristics of the communication radiation source based on the fractal complexity of the signal is proposed. According to the complexity of the received signal and the situation of environmental noise, use the fractal dimension characteristics of different complexity to depict the subtle characteristics of the signal to establish the characteristic database, and then identify different broadcasting station by gray relation theory system. The simulation results demonstrate that the algorithm can achieve recognition rate of 94% even in the environment with SNR of -10dB, and this provides an important theoretical basis for the accurate identification of the subtle features of the signal at low SNR in the field of information confrontation.

Rigorous analysis of thick microstrip antennas and wire antennas embedded in a substrate

NASA Astrophysics Data System (ADS)

Smolders, A. B.

1992-07-01

An efficient and rigorous method for the analysis of electrically thick rectangular microstrip antennas and wire antennas with a dielectric cover is presented. The method of moments is used in combination with the exact spectral domain Green's function in order to find the unknown currents on the antenna. The microstrip antenna is fed by a coaxial cable. A proper model of the feeding coaxial structure is used. In addition, a special attachment mode was applied to ensure continuity of current at the patch-coax transition. The efficiency of the method of moments is improved by using the so called source term extraction technique, where a great part of the infinite integrals involved with the method of moment formulation is calculated analytically. Computation time can be saved by selecting a set of basis functions that describes the current distribution on the patch and probe in an accurate way using only a few terms of this set. Thick microstrip antennas have broadband characteristics. However, a proper match to 50 Ohms is often difficult. This matching problem can be avoided by using a slightly different excitation structure. The patch is now electromagnetically coupled to the feeding probe. A bandwidth of more than 40 can easily be obtained for this type of microstrip antenna. The price to be paid is a degradation of the radiation characteristics.

Short-term gas dispersion in idealised urban canopy in street parallel with flow direction

NASA Astrophysics Data System (ADS)

Chaloupecká, Hana; Jaňour, Zbyněk; Nosek, Štěpán

2016-03-01

Chemical attacks (e.g. Syria 2014-15 chlorine, 2013 sarine or Iraq 2006-7 chlorine) as well as chemical plant disasters (e.g. Spain 2015 nitric oxide, ferric chloride; Texas 2014 methyl mercaptan) threaten mankind. In these crisis situations, gas clouds are released. Dispersion of gas clouds is the issue of interest investigated in this paper. The paper describes wind tunnel experiments of dispersion from ground level point gas source. The source is situated in a model of an idealised urban canopy. The short duration releases of passive contaminant ethane are created by an electromagnetic valve. The gas cloud concentrations are measured in individual places at the height of the human breathing zone within a street parallel with flow direction by Fast-response Ionisation Detector. The simulations of the gas release for each measurement position are repeated many times under the same experimental set up to obtain representative datasets. These datasets are analysed to compute puff characteristics (arrival, leaving time and duration). The results indicate that the mean value of the dimensionless arrival time can be described as a growing linear function of the dimensionless coordinate in the street parallel with flow direction where the gas source is situated. The same might be stated about the dimensionless leaving time as well as the dimensionless duration, however these fits are worse. Utilising a linear function, we might also estimate some other statistical characteristics from datasets than the datasets means (medians, trimeans). The datasets of the dimensionless arrival time, the dimensionless leaving time and the dimensionless duration can be fitted by the generalized extreme value distribution (GEV) in all sampling positions except one.

Correlating DMSP and NOAA Ion Precipitation Observations with Low Altitude ENA Emissions During the Declining Phase of Solar Cycle 23

NASA Astrophysics Data System (ADS)

Mackler, D. A.; Jahn, J. M.; Perez, J. D.; Pollock, C. J.

2014-12-01

Plasma sheet particles with sufficiently low mirror points will interact with thermospheric neutrals through charge exchange. The resulting ENAs are no longer magnetically bound and can therefore be detected by remote platforms outside the ionosphere/lower atmosphere. These ENAs closely associated with ion precipitation are termed Low Altitude Emissions (LAEs). They are non-isotropic in velocity space and mimic the corresponding ion pitch angle distribution. In this study we present a statistical correlation between remote observations of the LAE emission characteristics and ion precipitation maps determined in situ over the declining phase of solar cycle 23 (2000-2005). We discuss the strength and derived location (MLT, iMLAT) of LAEs as a function of geomagnetic activity levels in relation to the simultaneously measured strength, location, and spectral characteristics of in situ ion precipitation. These comparisons may allow us to use ENA images to assess where and how much energy is deposited during any type of enhanced geomagnetic activity. The precipitating ion differential directional flux maps are built up from combining NOAA-14/15/16 TED and DMSP-13/14/15 SSJ4 data. Low altitude ENA source locations are identified algorithmically using IMAGE/MENA images. ENA flux maps are derived by computing the LAE source locations assuming an ENA emission altitude (h) of 650 km, then projecting each image pixel onto a sphere with radius Re+h to determine the local time and latitude extent of the ENA source. The IGRF magnetic field model is used in combination with the Solar Magnetic coordinates of LAE pixels to compute the pitch angle of the escaping neutrals (previously ion before charge exchanging). Pitch angles larger than 90° will have a mirror point further into the atmosphere than the assumed emission altitude.

Temporal geochemical evolution of Kilauea Volcano: Comparison of Hilina and Puna Basalt

NASA Astrophysics Data System (ADS)

Chen, C.-Y.; Frey, F. A.; Rhodes, J. M.; Eastern, R. M.

Temporal geochcmical variations in Hawaiian shield-building lavas provide important constraints on the origin and evolution of these lavas. We determined the major and trace element content, and Sr, Nd and Pb isotopic ratios of the oldest subaerially exposed lavas on Kilauea Volcano, i.e., the >25 Ka to perhaps 100 Ka, Hilina Basalt. Except for lower K2O and Rb abundances in Hilina lavas, the compositions of these prehistoric lavas overlap with historical Kilauea lavas. Although the studied Hilina lavas are not highly altered, the lower abundances of K2O and Rb may reflect post-eruptive alteration. Compared with historical Kilauea lavas, Hilina lavas have a similar range in Sr and Nd isotopic ratios, but they range to more radiogenic Pb isotopic ratios. The mantle source of Kilauea lavas is heterogeneous in isotopic ratios and perhaps in abundance ratios of some incompatible elements, but there is no evidence for systematic long-term geochemical variations in the source of Kilauea lavas. None of the prehistoric Kilauea lavas have isotopic characteristics similar to those of subaerial Mauna Loa lavas. Apparently, the sources and ascent paths of lavas forming the adjacent Kilauea and Mauna Loa shields have largely remained distinct during subaerial growth of the Kilauea shield. Compared to lavas from other Hawaiian shields, Kilauea lavas range to relatively high 206Pb/204Pb and low 87Sr/86Sr. These isotopic ratios are correlated with trace element abundance ratios that involve Nb, e.g., Zr/Nb; some Hilina lavas define the upper range in 206Pb/204Pb (˜18.82), and they have low Zr/Nb (˜8). This "Kilauea component" which has isotopic characteristics similar to the FOZO component (e.g., Hauri et al., 1994a] is an intrinsic part of the Hawaiian plume.

Occurrence of dissolved solids, nutrients, atrazine, and fecal coliform bacteria during low flow in the Cheney Reservoir watershed, south-central Kansas, 1996

USGS Publications Warehouse

Christensen, V.G.; Pope, L.M.

1997-01-01

A network of 34 stream sampling sites was established in the 1,005-square-mile Cheney Reservoir watershed, south-central Kansas, to evaluate spatial variability in concentrations of selected water-quality constituents during low flow. Land use in the Cheney Reservoir watershed is almost entirely agricultural, consisting of pasture and cropland. Cheney Reservoir provides 40 to 60 percent of the water needs for the city of Wichita, Kansas. Sampling sites were selected to determine the relative contribution of point and nonpoint sources of water-quality constituents to streams in the watershed and to identify areas of potential water-quality concern. Water-quality constituents of interest included dissolved solids and major ions, nitrogen and phosphorus nutrients, atrazine, and fecal coliform bacteria. Water from the 34 sampling sites was sampled once in June and once in September 1996 during Phase I of a two-phase study to evaluate water-quality constituent concentrations and loading characteristics in selected subbasins within the watershed and into and out of Cheney Reservoir. Information summarized in this report pertains to Phase I and was used in the selection of six long-term monitoring sites for Phase II of the study. The average low-flow constituent concentrations in water collected during Phase I from all sampling sites was 671 milligrams per liter for dissolved solids, 0.09 milligram per liter for dissolved ammonia as nitrogen, 0.85 milligram per liter for dissolved nitrite plus nitrate as nitrogen, 0.19 milligram per liter for total phosphorus, 0.20 microgram per liter for dissolved atrazine, and 543 colonies per 100 milliliters of water for fecal coliform bacteria. Generally, these constituents were of nonpoint-source origin and, with the exception of dissolved solids, probably were related to agricultural activities. Dissolved solids probably occur naturally as the result of the dissolution of rocks and ancient marine sediments containing large salt deposits. Nutrients also may have resulted from point-source discharges from wastewater-treatment plants. An examination of water-quality characteristics during low flow in the Cheney Reservoir watershed provided insight into the spatial variability of water-quality constituents and allowed for between-site comparisons under stable-flow conditions; identified areas of the watershed that may be of particular water-quality concern; provided a preliminary evaluation of contributions from point and nonpoint sources of contamination; and identified areas of the watershed where long-term monitoring may be appropriate to quantify perceived water-quality problems.

Radon as a tracer to characterize the interactions between groundwater and surface water around the ground source heat pump system in riverside area

NASA Astrophysics Data System (ADS)

Kim, Jaeyeon; Lee, Seong-Sun; Lee, Kang-Kun

2016-04-01

The interaction characteristics between groundwater and surface water was examined by using Radon-222 at Han River Environmental Research Center (HRERC) in Korea where a geothermal resource using indirect open loop ground source heat pump (GSHP) has been developed. For designing a high efficiency performance of the open loop system in shallow aquifer, the riverside area was selected for great advantage of full capacity of well. From this reason groundwater properties of the study site can be easily influenced by influx of surrounding Han River. Therefore, 12 groundwater wells were used for monitoring radon concentration and groundwater level with fluctuation of river stage from May, 2014 to Apr., 2015. The short term monitoring data showed that the radon concentration was changed in accordance with flow meter data which was reflected well by the river stage fluctuation. The spatial distribution of radon concentration from long term monitoring data was also found to be affected by water level fluctuation by nearby dam activity and seasonal effect such as heavy rainfall and groundwater pumping. The estimated residence time indicates that river flows to the study site change its direction according to the combined effect of river stage and groundwater hydrology. In the linear regression of the values, flow velocities were yielded around 0.04 to 0.25 m/day which were similar to flow meter data. These results reveal that Radon-222 can be used as an appropriate environmental tracer in examining the characteristics of interaction in consideration of fluctuating river flow on operation of GSHP in the riverside area. ACKNOWLEDGEMENT This work was supported by the research project of "Advanced Technology for Groundwater Development and Application in Riversides (Geowater+) in "Water Resources Management Program (code 11 Technology Innovation C05)" of the MOLIT and the KAIA in Korea.

Species and temperature predictions in a semi-industrial MILD furnace using a non-adiabatic conditional source-term estimation formulation

NASA Astrophysics Data System (ADS)

Labahn, Jeffrey William; Devaud, Cecile

2017-05-01

A Reynolds-Averaged Navier-Stokes (RANS) simulation of the semi-industrial International Flame Research Foundation (IFRF) furnace is performed using a non-adiabatic Conditional Source-term Estimation (CSE) formulation. This represents the first time that a CSE formulation, which accounts for the effect of radiation on the conditional reaction rates, has been applied to a large scale semi-industrial furnace. The objective of the current study is to assess the capabilities of CSE to accurately reproduce the velocity field, temperature, species concentration and nitrogen oxides (NOx) emission for the IFRF furnace. The flow field is solved using the standard k-ε turbulence model and detailed chemistry is included. NOx emissions are calculated using two different methods. Predicted velocity profiles are in good agreement with the experimental data. The predicted peak temperature occurs closer to the centreline, as compared to the experimental observations, suggesting that the mixing between the fuel jet and vitiated air jet may be overestimated. Good agreement between the species concentrations, including NOx, and the experimental data is observed near the burner exit. Farther downstream, the centreline oxygen concentration is found to be underpredicted. Predicted NOx concentrations are in good agreement with experimental data when calculated using the method of Peters and Weber. The current study indicates that RANS-CSE can accurately predict the main characteristics seen in a semi-industrial IFRF furnace.

Mergers of Non-spinning Black-hole Binaries: Gravitational Radiation Characteristics

NASA Technical Reports Server (NTRS)

Baker, John G.; Boggs, William D.; Centrella, Joan; Kelly, Bernard J.; McWilliams, Sean T.; vanMeter, James R.

2008-01-01

We present a detailed descriptive analysis of the gravitational radiation from black-hole binary mergers of non-spinning black holes, based on numerical simulations of systems varying from equal-mass to a 6:1 mass ratio. Our primary goal is to present relatively complete information about the waveforms, including all the leading multipolar components, to interested researchers. In our analysis, we pursue the simplest physical description of the dominant features in the radiation, providing an interpretation of the waveforms in terms of an implicit rotating source. This interpretation applies uniformly to the full wavetrain, from inspiral through ringdown. We emphasize strong relationships among the l = m modes that persist through the full wavetrain. Exploring the structure of the waveforms in more detail, we conduct detailed analytic fitting of the late-time frequency evolution, identifying a key quantitative feature shared by the l = m modes among all mass-ratios. We identify relationships, with a simple interpretation in terms of the implicit rotating source, among the evolution of frequency and amplitude, which hold for the late-time radiation. These detailed relationships provide sufficient information about the late-time radiation to yield a predictive model for the late-time waveforms, an alternative to the common practice of modeling by a sum of quasinormal mode overtones. We demonstrate an application of this in a new effective-one-body-based analytic waveform model.

Two Machine Learning Approaches for Short-Term Wind Speed Time-Series Prediction.

PubMed

Ak, Ronay; Fink, Olga; Zio, Enrico

2016-08-01

The increasing liberalization of European electricity markets, the growing proportion of intermittent renewable energy being fed into the energy grids, and also new challenges in the patterns of energy consumption (such as electric mobility) require flexible and intelligent power grids capable of providing efficient, reliable, economical, and sustainable energy production and distribution. From the supplier side, particularly, the integration of renewable energy sources (e.g., wind and solar) into the grid imposes an engineering and economic challenge because of the limited ability to control and dispatch these energy sources due to their intermittent characteristics. Time-series prediction of wind speed for wind power production is a particularly important and challenging task, wherein prediction intervals (PIs) are preferable results of the prediction, rather than point estimates, because they provide information on the confidence in the prediction. In this paper, two different machine learning approaches to assess PIs of time-series predictions are considered and compared: 1) multilayer perceptron neural networks trained with a multiobjective genetic algorithm and 2) extreme learning machines combined with the nearest neighbors approach. The proposed approaches are applied for short-term wind speed prediction from a real data set of hourly wind speed measurements for the region of Regina in Saskatchewan, Canada. Both approaches demonstrate good prediction precision and provide complementary advantages with respect to different evaluation criteria.

Mergers of nonspinning black-hole binaries: Gravitational radiation characteristics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baker, John G.; Centrella, Joan; Kelly, Bernard J.

2008-08-15

We present a detailed descriptive analysis of the gravitational radiation from black-hole binary mergers of nonspinning black holes, based on numerical simulations of systems varying from equal mass to a 6 ratio 1 mass ratio. Our primary goal is to present relatively complete information about the waveforms, including all the leading multipolar components, to interested researchers. In our analysis, we pursue the simplest physical description of the dominant features in the radiation, providing an interpretation of the waveforms in terms of an implicit rotating source. This interpretation applies uniformly to the full wave train, from inspiral through ringdown. We emphasizemore » strong relationships among the l=m modes that persist through the full wave train. Exploring the structure of the waveforms in more detail, we conduct detailed analytic fitting of the late-time frequency evolution, identifying a key quantitative feature shared by the l=m modes among all mass ratios. We identify relationships, with a simple interpretation in terms of the implicit rotating source, among the evolution of frequency and amplitude, which hold for the late-time radiation. These detailed relationships provide sufficient information about the late-time radiation to yield a predictive model for the late-time waveforms, an alternative to the common practice of modeling by a sum of quasinormal mode overtones. We demonstrate an application of this in a new effective-one-body-based analytic waveform model.« less

[Responses of sap flow to natural rainfall and continuous drought of tree species growing on bedrock outcrops].

PubMed

Zhang, Hui Ling; Ding, Ya Li; Chen, Hong Song; Wang, Ke Lin; Nie, Yun Peng

2018-04-01

This study focused on bedrock outcrops, a very common habitat in karst region of southwest China. To reveal the responses of plant transpiration to natural rainfall and continuous drought, two tree species typical to this habitat, Radermachera sinica and Triadica rotundifolia, were selected as test materials. A rainout shelter was used to simulate continuous drought. The sap flow dynamics were monitored using the method of Granier's thermal dissipation probe (TDP). Our results showed that sap flow density increased to different degrees after rain in different stages of the growing season. Sap flow density of the deciduous species T. rotundifolia was always higher than that of the semi-deciduous species R. sinica. After two months without rainfall input, both species exhibited no obvious decrease in sap flow density, indicating that rainfall was not the dominant source for their water uptake, at least in the short-term. Based on the regression relationships between sap flow density and meteorological factors before and after rainfall, as well as at different stages of continuous drought, we found that the dynamics of meteorological factors contributed little to plant transpiration. The basic transpiration characteristics of both species were not changed in the circumstance of natural rainfall and short-term continuous drought, which would be closely related to the special water storage environments of bedrock outcrops and the reliance on deep water sources by tree species.

Measuring Contextual Characteristics for Community Health

PubMed Central

Hillemeier, Marianne M; Lynch, John; Harper, Sam; Casper, Michele

2003-01-01

Objective To conceptualize and measure community contextual influences on population health and health disparities. Data Sources We use traditional and nontraditional secondary sources of data comprising a comprehensive array of community characteristics. Study Design Using a consultative process, we identify 12 overarching dimensions of contextual characteristics that may affect community health, as well as specific subcomponents relating to each dimension. Data Collection An extensive geocoded library of data indicators relating to each dimension and subcomponent for metropolitan areas in the United States is assembled. Principal Findings We describe the development of community contextual health profiles, present the rationale supporting each of the profile dimensions, and provide examples of relevant data sources. Conclusions Our conceptual framework for community contextual characteristics, including a specified set of dimensions and components, can provide practical ways to monitor health-related aspects of the economic, social, and physical environments in which people live. We suggest several guiding principles useful for understanding how aspects of contextual characteristics can affect health and health disparities. PMID:14727793

Time-frequency approach to underdetermined blind source separation.

PubMed

Xie, Shengli; Yang, Liu; Yang, Jun-Mei; Zhou, Guoxu; Xiang, Yong

2012-02-01

This paper presents a new time-frequency (TF) underdetermined blind source separation approach based on Wigner-Ville distribution (WVD) and Khatri-Rao product to separate N non-stationary sources from M(M <; N) mixtures. First, an improved method is proposed for estimating the mixing matrix, where the negative value of the auto WVD of the sources is fully considered. Then after extracting all the auto-term TF points, the auto WVD value of the sources at every auto-term TF point can be found out exactly with the proposed approach no matter how many active sources there are as long as N ≤ 2M-1. Further discussion about the extraction of auto-term TF points is made and finally the numerical simulation results are presented to show the superiority of the proposed algorithm by comparing it with the existing ones.

The Location and Characteristics of Fixed-Term and Casual Female Workers in Australia: Analysis of AWIRS95.

ERIC Educational Resources Information Center

Hall, Richard; Harley, Bill

2000-01-01

The employee and job characteristics of fixed-term and casual female employees were compared with those of other female employees. Among female employees, the characteristics of the industry and occupation in which they are employed are as important than their contingent status in influencing employment outcomes. (JOW)

26 CFR 31.3401(a)(14)-1 - Group-term life insurance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 15 2010-04-01 2010-04-01 false Group-term life insurance. 31.3401(a)(14)-1... SOURCE Collection of Income Tax at Source § 31.3401(a)(14)-1 Group-term life insurance. (a) The cost of group-term life insurance on the life of an employee is excepted from wages, and hence is not subject to...

26 CFR 31.3401(a)(14)-1 - Group-term life insurance.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 15 2011-04-01 2011-04-01 false Group-term life insurance. 31.3401(a)(14)-1... SOURCE Collection of Income Tax at Source § 31.3401(a)(14)-1 Group-term life insurance. (a) The cost of group-term life insurance on the life of an employee is excepted from wages, and hence is not subject to...

26 CFR 31.3401(a)(14)-1 - Group-term life insurance.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 15 2012-04-01 2012-04-01 false Group-term life insurance. 31.3401(a)(14)-1... SOURCE Collection of Income Tax at Source § 31.3401(a)(14)-1 Group-term life insurance. (a) The cost of group-term life insurance on the life of an employee is excepted from wages, and hence is not subject to...

26 CFR 31.3401(a)(14)-1 - Group-term life insurance.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 15 2014-04-01 2014-04-01 false Group-term life insurance. 31.3401(a)(14)-1... SOURCE Collection of Income Tax at Source § 31.3401(a)(14)-1 Group-term life insurance. (a) The cost of group-term life insurance on the life of an employee is excepted from wages, and hence is not subject to...

26 CFR 31.3401(a)(14)-1 - Group-term life insurance.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 15 2013-04-01 2013-04-01 false Group-term life insurance. 31.3401(a)(14)-1... SOURCE Collection of Income Tax at Source § 31.3401(a)(14)-1 Group-term life insurance. (a) The cost of group-term life insurance on the life of an employee is excepted from wages, and hence is not subject to...

Molecular characteristics of continuously released DOM during one year of root and leaf litter decomposition

NASA Astrophysics Data System (ADS)

Altmann, Jens; Jansen, Boris; Kalbitz, Karsten; Filley, Timothy

2013-04-01

Dissolved organic matter (DOM) is one of the most dynamic carbon pools linking the terrestrial with the aquatic carbon cycle. Besides the insecure contribution of terrestrial DOM to the greenhouse effect, DOM also plays an important role for the mobility and availability of heavy metals and organic pollutants in soils. These processes depend very much on the molecular characteristics of the DOM. Surprisingly the processes that determine the molecular composition of DOM are only poorly understood. DOM can originate from various sources, which influence its molecular composition. It has been recognized that DOM formation is not a static process and DOM characteristics vary not only between different carbon sources. However, molecular characteristics of DOM extracts have scarcely been studied continuously over a longer period of time. Due to constant molecular changes of the parent litter material or soil organic matter during microbial degradation, we assumed that also the molecular characteristics of litter derived DOM varies at different stages during root and needle decomposition. For this study we analyzed the chemical composition of root and leaf samples of 6 temperate tree species during one year of litter decomposition in a laboratory incubation. During this long-term experiment we measured continuously carbon and nitrogen contents of the water extracts and the remaining residues, C mineralization rates, and the chemical composition of water extracts and residues by Curie-point pyrolysis mass spectrometry with TMAH We focused on the following questions: (I) How mobile are molecules derived from plant polymers like tannin, lignin, suberin and cutin? (II) How does the composition of root and leaf derived DOM change over time in dependence on the stage of decomposition and species? Litter derived DOM was generally dominated by aromatic compounds. Substituded fatty acids as typically cutin or suberin derived were not detected in the water extracts. Fresh leaf and needle samples released a much higher amount of tannins than fresh root samples. At later litter decomposition stages the influence of tannins decreased and lignin derived phenols dominated the extracts. With ongoing litter degradation the degree of oxidation for the litter material increased, which was also reflected by the water extracted molecules.

The role of collective labor contracts and individual characteristics on job satisfaction in Tuscan nursing homes.

PubMed

Vainieri, Milena; Smaldone, Pierluigi; Rosa, Antonella; Carroll, Kathleen

2017-08-23

The role played by remuneration strategies in motivating health care professionals is one of the most studied factors. Some studies of nursing home (NH) services, while considering wages and labor market characteristics, do not explicitly account for the influence of the contract itself. This study investigates the relationship between the labor contracts applied in 62 Tuscan NHs and NH aides' job satisfaction with two aims: to investigate the impact of European contracts on employee satisfaction in health care services and to determine possible limitations of research not incorporating these contracts. We apply a multilevel model to data gathered from a staff survey administered in 2014 to all employees of 62 NHs to analyze two levels: individual and NH. Labor contracts were introduced into the model as a variable of NH. Findings show that the factors influencing nursing aides' satisfaction occur at both the individual and NH levels. Organizational characteristics explain 16% of the variation. For individual characteristics, foreign and temporary workers emerge as more satisfied than others. For NH variables, results indicate that the labor contract with the worst conditions is not associated with lower workers' satisfaction. Although working conditions play a relevant role in the job satisfaction of aides, labor contracts do not seem to affect it. Interestingly, aides of the NHs with the contract having the best conditions register a significantly lower level of satisfaction compared to the NHs with the worst contract conditions. This suggests that organizational factors such as culture, team work, and other characteristics, which were not explicitly considered in this study, may be more powerful sources of worker satisfaction than labor contracts. Our analysis has value as a management tool to consider alternative sources as well as the labor contract for employee incentives.This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in any way or used commercially without permission from the journal.

Geochemistry and Petrogenesis of Cenozoic Potassic Volcanic Rock in the Ashikule Basin, West Kunlun Mountain Belt

NASA Astrophysics Data System (ADS)

Lin, W.; Song, S.; Li, H.

2012-12-01

The Ashikule Basin (AKB), located in the junction of West Kunlun Mountain belt and Alytn Tagh Fault. There are 11 volumetric limited volcanoes and a nearly east-west lying Ashikule strike-slip fault cut through the middle of the basin. Ashikule volcanic rocks are the high-K series with SiO2 content raging from 47 wt% to 74 wt%. According to their geochemical characteristic, they can thereby subdivide into two groups. One is the trachybasalt and trachyandesite which show Ta-Nb-Ti depletion, strong LREE and HREE fractionation, and their La/Yb remaining constant with La variation; these characteristics indicate that their magma source might be garnet-bearing lithology with ancient subduction signal. The other, rhyolite, trachydacite and some of trachyandesite, shows slightly to strongly Sr, Ba and Ti depletions, negative Eu anomaly, and their La/Yb increase with La variation, which suggest that there are different degrees of plagioclase fractionation during magma uprising. But being different from the former group, they did not have heritage of the TNT depletion. The characteristic of 143Nd/144Nd and 87Sr/86Sr in those volcanic rocks are similar to and shows the affinity of EMII, and tend to have slightly higher 87Sr/86Sr with higher SiO2 content. It infers that despite of the wide range of trace element characteristics, both groups have a similar source with a slight higher crustal component as SiO2 content increase. With respect to the variety of the trace element contents and other geochemical data of AKB volcanic rock, the magma genesis of this area might not be simple. There is no significant trend temporally or spatially in terms of geochemical characteristics, indicating that they might be evolved from several small chambers in the basin, instead of evolution and subsequently undergoing mixing process from single chamber. Volumetrically small chambers are consistent with those simulation works for viscous shear heating, addition to the spatial consistency of volcanoes along the Kunlun fault, the shear heating mechanism may have a great contribution of magma origin for this region.

Hardwall acoustical characteristics and measurement capabilities of the NASA Lewis 9 x 15 foot low speed wind tunnel

NASA Technical Reports Server (NTRS)

Rentz, P. E.

1976-01-01

Experimental evaluations of the acoustical characteristics and source sound power and directionality measurement capabilities of the NASA Lewis 9 x 15 foot low speed wind tunnel in the untreated or hardwall configuration were performed. The results indicate that source sound power estimates can be made using only settling chamber sound pressure measurements. The accuracy of these estimates, expressed as one standard deviation, can be improved from + or - 4 db to + or - 1 db if sound pressure measurements in the preparation room and diffuser are also used and source directivity information is utilized. A simple procedure is presented. Acceptably accurate measurements of source direct field acoustic radiation were found to be limited by the test section reverberant characteristics to 3.0 feet for omni-directional and highly directional sources. Wind-on noise measurements in the test section, settling chamber and preparation room were found to depend on the sixth power of tunnel velocity. The levels were compared with various analytic models. Results are presented and discussed.

New Insights into Various Production Characteristics of Streptococcus thermophilus Strains

PubMed Central

Cui, Yanhua; Xu, Tingting; Qu, Xiaojun; Hu, Tong; Jiang, Xu; Zhao, Chunyu

2016-01-01

Streptococcus thermophilus is one of the most valuable homo-fermentative lactic acid bacteria, which, for a long time, has been widely used as a starter for the production of fermented dairy products. The key production characteristics of S. thermophilus, for example the production of extracellular polysaccharide, proteolytic enzymes and flavor substances as well as acidifying capacity etc., have an important effect on the quality of dairy products. The acidification capacity of the strains determines the manufacturing time and quality of dairy products. It depends on the sugar utilization ability of strains. The production of extracellular polysaccharide is beneficial for improving the texture of dairy products. Flavor substances increase the acceptability of dairy products. The proteolytic activity of the strain influences not only the absorption of the nitrogen source, but also the formation of flavor substances. Different strains have obvious differences in production characteristics via long-time evolution and adaptation to environment. Gaining new strains with novel and desirable characteristics is an important long-term goal for researchers and the fermenting industry. The understanding of the potential molecular mechanisms behind important characteristics of different strains will promote the screening and breeding of excellent strains. In this paper, key technological and functional properties of different S. thermophilus strains are discussed, including sugar metabolism, proteolytic system and amino acid metabolism, and polysaccharide and flavor substance biosynthesis. At the same time, diversity of genomes and plasmids of S. thermophilus are presented. Advances in research on key production characteristics and molecular levels of S. thermophilus will increase understanding of molecular mechanisms of different strains with different important characteristics, and improve the industrialization control level for fermented foods. PMID:27754312

Inter-comparison of Seasonal Variation, Chemical Characteristics, and Source Identification of Atmospheric Fine Particles on Both Sides of the Taiwan Strait

PubMed Central

Li, Tsung-Chang; Yuan, Chung-Shin; Huang, Hu-Ching; Lee, Chon-Lin; Wu, Shui-Ping; Tong, Chuan

2016-01-01

The spatiotemporal distribution and chemical composition of atmospheric fine particles in areas around the Taiwan Strait were firstly investigated. Fine particles (PM2.5) were simultaneously collected at two sites on the west-side, one site at an offshore island, and three sites on the east-side of the Taiwan Strait in 2013–2014. Field sampling results indicated that the average PM2.5 concentrations at the west-side sampling sites were generally higher than those at the east-side sampling sites. In terms of chemical composition, the most abundant water-soluble ionic species of PM2.5 were SO42−, NO3−, and NH4+, while natural crustal elements dominated the metallic content of PM2.5, and the most abundant anthropogenic metals of PM2.5 were Pb, Ni and Zn. Moreover, high OC/EC ratios of PM2.5 were commonly observed at the west-side sampling sites, which are located at the downwind of major stationary sources. Results from CMB receptor modeling showed that the major sources of PM2.5 were anthropogenic sources and secondary aerosols at the both sides, and natural sources dominated PM2.5 at the offshore site. A consistent decrease of secondary sulfate and nitrate contribution to PM2.5 suggested the transportation of aged particles from the west-side to the east-side of the Taiwan Strait. PMID:26973085

Fusion or confusion: knowledge or nonsense?

NASA Astrophysics Data System (ADS)

Rothman, Peter L.; Denton, Richard V.

1991-08-01

The terms 'data fusion,' 'sensor fusion,' multi-sensor integration,' and 'multi-source integration' have been used widely in the technical literature to refer to a variety of techniques, technologies, systems, and applications which employ and/or combine data derived from multiple information sources. Applications of data fusion range from real-time fusion of sensor information for the navigation of mobile robots to the off-line fusion of both human and technical strategic intelligence data. The Department of Defense Critical Technologies Plan lists data fusion in the highest priority group of critical technologies, but just what is data fusion? The DoD Critical Technologies Plan states that data fusion involves 'the acquisition, integration, filtering, correlation, and synthesis of useful data from diverse sources for the purposes of situation/environment assessment, planning, detecting, verifying, diagnosing problems, aiding tactical and strategic decisions, and improving system performance and utility.' More simply states, sensor fusion refers to the combination of data from multiple sources to provide enhanced information quality and availability over that which is available from any individual source alone. This paper presents a survey of the state-of-the- art in data fusion technologies, system components, and applications. A set of characteristics which can be utilized to classify data fusion systems is presented. Additionally, a unifying mathematical and conceptual framework within which to understand and organize fusion technologies is described. A discussion of often overlooked issues in the development of sensor fusion systems is also presented.

Source Listings for Computer Code SPIRALI Incompressible, Turbulent Spiral Grooved Cylindrical and Face Seals

NASA Technical Reports Server (NTRS)

Walowit, Jed A.; Shapiro, Wibur

2005-01-01

This is the source listing of the computer code SPIRALI which predicts the performance characteristics of incompressible cylindrical and face seals with or without the inclusion of spiral grooves. Performance characteristics include load capacity (for face seals), leakage flow, power requirements and dynamic characteristics in the form of stiffness, damping and apparent mass coefficients in 4 degrees of freedom for cylindrical seals and 3 degrees of freedom for face seals. These performance characteristics are computed as functions of seal and groove geometry, load or film thickness, running and disturbance speeds, fluid viscosity, and boundary pressures.

High-resolution observations of low-luminosity gigahertz-peaked spectrum and compact steep-spectrum sources

NASA Astrophysics Data System (ADS)

Collier, J. D.; Tingay, S. J.; Callingham, J. R.; Norris, R. P.; Filipović, M. D.; Galvin, T. J.; Huynh, M. T.; Intema, H. T.; Marvil, J.; O'Brien, A. N.; Roper, Q.; Sirothia, S.; Tothill, N. F. H.; Bell, M. E.; For, B.-Q.; Gaensler, B. M.; Hancock, P. J.; Hindson, L.; Hurley-Walker, N.; Johnston-Hollitt, M.; Kapińska, A. D.; Lenc, E.; Morgan, J.; Procopio, P.; Staveley-Smith, L.; Wayth, R. B.; Wu, C.; Zheng, Q.; Heywood, I.; Popping, A.

2018-06-01

We present very long baseline interferometry observations of a faint and low-luminosity (L1.4 GHz < 1027 W Hz-1) gigahertz-peaked spectrum (GPS) and compact steep-spectrum (CSS) sample. We select eight sources from deep radio observations that have radio spectra characteristic of a GPS or CSS source and an angular size of θ ≲ 2 arcsec, and detect six of them with the Australian Long Baseline Array. We determine their linear sizes, and model their radio spectra using synchrotron self-absorption (SSA) and free-free absorption (FFA) models. We derive statistical model ages, based on a fitted scaling relation, and spectral ages, based on the radio spectrum, which are generally consistent with the hypothesis that GPS and CSS sources are young and evolving. We resolve the morphology of one CSS source with a radio luminosity of 10^{25} W Hz^{-1}, and find what appear to be two hotspots spanning 1.7 kpc. We find that our sources follow the turnover-linear size relation, and that both homogeneous SSA and an inhomogeneous FFA model can account for the spectra with observable turnovers. All but one of the FFA models do not require a spectral break to account for the radio spectrum, while all but one of the alternative SSA and power-law models do require a spectral break to account for the radio spectrum. We conclude that our low-luminosity sample is similar to brighter samples in terms of their spectral shape, turnover frequencies, linear sizes, and ages, but cannot test for a difference in morphology.

12 CFR 201.4 - Availability and terms of credit.

Code of Federal Regulations, 2014 CFR

2014-01-01

... overnight, as a backup source of funding to a depository institution that is in generally sound financial... to a few weeks as a backup source of funding to a depository institution if, in the judgment of the... very short-term basis, usually overnight, as a backup source of funding to a depository institution...

Clinical and Biochemical Characteristics of Brain-Dead Donors as Predictors of Early- and Long-Term Renal Function After Transplant.

PubMed

Kwiatkowska, Ewa; Domański, Leszek; Bober, Joanna; Safranow, Krzysztof; Pawlik, Andrzej; Ciechanowski, Kazimierz; Wiśniewska, Magda; Kędzierska, Karolina

2017-08-01

Organs from brain-dead donors are the main source of allografts for transplant. Comparisons between living-donor and brain-dead donor kidneys show that the latter are more likely to demonstrate delayed graft function and lower long-term survival. This study aimed to assess the effects of various clinical and biochemical factors of donors on early- and long-term renal function after transplant. We analyzed data from kidney recipients treated between 2006 and 2008 who received organs from brain-dead donors. Data from 54 donors and 89 recipients were analyzed. No relation was observed between donor sodium concentration and the presence of delayed graft function. Donor height was positively correlated with creatinine clearance in recipients in the 1 to 3 months after renal transplant. Donor diastolic blood pressure was negatively correlated with estimated glomerular filtration rate throughout the observation period. Donor age was negatively correlated with the allograft recipient's estimated glomerular filtration rate throughout 4 years of observation. Donor estimated glomerular filtration rate was positively correlated with that of the recipient throughout 3 years of observation. The results of this study indicate that various factors associated with allograft donors may influence graft function.

Collagen from Marine Biological Sources and Medical Applications.

PubMed

Felician, Fatuma Felix; Xia, Chunlei; Qi, Weiyan; Xu, Hanmei

2018-05-01

Collagen is the most studied protein with a wide range of applications including pharmaceutical, biomedical, cosmetics, leather, and film industries due to its special characteristics that are high biocompatibility, good bioactivity, and weak antigenicity. Although collagen sources are abundant, the outbreak of varied diseases among land animals posed threat to its utilization in our daily life. Thus, a probe for an alternative source began, which in turn revealed the immense untapped marine sources, such as fish, jellyfish, and some marine Mammals. The present article deals with a brief description of collagen, its characteristics, marine sources, extraction, collagen peptides and their biological activities, potential use and application in various field. © 2018 Wiley-VHCA AG, Zurich, Switzerland.

Long-term characteristics of nuclear emulsion

NASA Astrophysics Data System (ADS)

Naganawa, N.; Kuwabara, K.

2010-02-01

Long-term characteristics of the nuclear emulsion so called ``OPERA film'' used in the neutrino oscillation experiment, OPERA, has been studied for 8 years since its production or refreshing after it. In the results, it turned out to be excellent in sensitivity, amount of random noise, and refreshing characteristics. The retention capacity of latent image of tracks was also studied. The result will open the way to the recycling of 7,000,000 emulsion films which will remain not developed after 5 years of OPERA's run, and other long-term experiments with emulsion.

The roles of long-term phonotactic and lexical prosodic knowledge in phonological short-term memory.

PubMed

Tanida, Yuki; Ueno, Taiji; Lambon Ralph, Matthew A; Saito, Satoru

2015-04-01

Many previous studies have explored and confirmed the influence of long-term phonological representations on phonological short-term memory. In most investigations, phonological effects have been explored with respect to phonotactic constraints or frequency. If interaction between long-term memory and phonological short-term memory is a generalized principle, then other phonological characteristics-that is, suprasegmental aspects of phonology-should also exert similar effects on phonological short-term memory. We explored this hypothesis through three immediate serial-recall experiments that manipulated Japanese nonwords with respect to lexical prosody (pitch-accent type, reflecting suprasegmental characteristics) as well as phonotactic frequency (reflecting segmental characteristics). The results showed that phonotactic frequency affected the retention not only of the phonemic sequences, but also of pitch-accent patterns, when participants were instructed to recall both the phoneme sequence and accent pattern of nonwords. In addition, accent pattern typicality influenced the retention of the accent pattern: Typical accent patterns were recalled more accurately than atypical ones. These results indicate that both long-term phonotactic and lexical prosodic knowledge contribute to phonological short-term memory performance.

[Seasonal Variation Characteristics and Potential Source Contribution of Sulfate, Nitrate and Ammonium in Beijing by Using Single Particle Aerosol Mass Spectrometry].

PubMed

Liu, Lang; Zhang, Wen-jie; Du, Shi-yong; Hou, Lu-jian; Han, Bin; Yang, Wen; Chen, Min-dong; Bai, Zhi-peng

2016-05-15

Single particle aerosol mass spectrometry (SPAMS) was deployed to continuously observe the aerosol particles of Beijing urban area from 2013-12 to 2014-11, and the hourly average data of sulfate, nitrate and ammonium (SNA) were obtained using the characteristic ion tracer method. The mixing state and size distribution of SNA were analyzed. In addition, based on Hysplit 48 h back air mass trajectory results in combination with Concentration Weighted Trajectory method (CWT), we obtained the seasonal potential source contribution area of SNA. The results showed that the mixture of sulfate, nitrate and ammonium in spring and summer was more stable than that in autumn and winter. The size distribution of sulfate and nitrate was very similar. The size distribution characteristics of SNA followed the order of autumn > summer > spring > winter. The potential source region of SNA had similar spatial distribution characteristics, and the potential source region of SNA was mainly located in Beijing and south areas, especially at Tianjin, Langfang, Hengshui, Baoding and Shijiazhuang.

Direction dependent Love and Rayleigh wave noise characteristics using multiple arrays across Europe

NASA Astrophysics Data System (ADS)

Juretzek, Carina; Perleth, Magdalena; Hadziioannou, Celine

2016-04-01

Seismic noise has become an important signal source for tomography and monitoring purposes. Better understanding of the noise field characteristics is crucial to further improve noise applications. Our knowledge about common and different origins of Love and Rayleigh waves in the microseism band is still limited. This applies in particular for constraints on source locations and source mechanisms of Love waves. Here, 3-component beamforming is used to distinguish between the different polarized wave types in the primary and secondary microseism noise field recorded at several arrays across Europe. We compare characteristics of Love and Rayleigh wave noise, such as source directions and frequency content. Further, Love to Rayleigh wave ratios are measured and a dependence on direction is found, especially in the primary microseism band. Estimates of the kinetic energy density ratios propose a dominance of coherent Love waves in the primary, but not in the secondary microseism band. The seasonality of the noise field characteristics is examined by using a full year of data in 2013 and is found to be stable.

Modeling Online Health Information-Seeking Behavior in China: The Roles of Source Characteristics, Reward Assessment, and Internet Self-Efficacy.

PubMed

Cao, Weidan; Zhang, Xinyao; Xu, Kaibin; Wang, Yuanxin

2016-09-01

The outbreak of severe acute respiratory syndrome (SARS) in 2003 marked the explosion of health information seeking online in China and the increasing emergence of Chinese health websites. There are both benefits and potential hazards of people's online health information seeking. This article intended to test part of Wilson's second model of information behavior, including source characteristics and activating mechanisms, and to identify the relationships among perceived access, perceived expertise credibility, reward assessment, Internet self-efficacy, and online health information-seeking behavior. Data were drawn from face-to-face surveys and an online survey of health information seekers (N = 393) in China. The results showed that source characteristics predicted activating mechanisms, which in turn predicted online health information-seeking behavior. Activating mechanisms, that is, reward assessment and Internet self-efficacy, mediated the relationship between source characteristics (i.e., access and credibility) and online health information-seeking behavior. Strategies for improving information access, expertise credibility, and Internet self-efficacy are discussed in order to maximize the benefits of online health information seeking and to minimize the potential harm.

Attenuation Tomography of Northern California and the Yellow Sea / Korean Peninsula from Coda-source Normalized and Direct Lg Amplitudes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ford, S R; Dreger, D S; Phillips, W S

2008-07-16

Inversions for regional attenuation (1/Q) of Lg are performed in two different regions. The path attenuation component of the Lg spectrum is isolated using the coda-source normalization method, which corrects the Lg spectral amplitude for the source using the stable, coda-derived source spectra. Tomographic images of Northern California agree well with one-dimensional (1-D) Lg Q estimated from five different methods. We note there is some tendency for tomographic smoothing to increase Q relative to targeted 1-D methods. For example in the San Francisco Bay Area, which contains high attenuation relative to the rest of it's region, Q is over-estimated bymore » {approx}30. Coda-source normalized attenuation tomography is also carried out for the Yellow Sea/Korean Peninsula (YSKP) where output parameters (site, source, and path terms) are compared with those from the amplitude tomography method of Phillips et al. (2005) as well as a new method that ties the source term to the MDAC formulation (Walter and Taylor, 2001). The source terms show similar scatter between coda-source corrected and MDAC source perturbation methods, whereas the amplitude method has the greatest correlation with estimated true source magnitude. The coda-source better represents the source spectra compared to the estimated magnitude and could be the cause of the scatter. The similarity in the source terms between the coda-source and MDAC-linked methods shows that the latter method may approximate the effect of the former, and therefore could be useful in regions without coda-derived sources. The site terms from the MDAC-linked method correlate slightly with global Vs30 measurements. While the coda-source and amplitude ratio methods do not correlate with Vs30 measurements, they do correlate with one another, which provides confidence that the two methods are consistent. The path Q{sup -1} values are very similar between the coda-source and amplitude ratio methods except for small differences in the Da-xin-anling Mountains, in the northern YSKP. However there is one large difference between the MDAC-linked method and the others in the region near stations TJN and INCN, which point to site-effect as the cause for the difference.« less

10 CFR 40.41 - Terms and conditions of licenses.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Terms and conditions of licenses. 40.41 Section 40.41 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF SOURCE MATERIAL Licenses § 40.41 Terms and... the regulations in this part shall confine his possession and use of source or byproduct material to...

Water displacement leg volumetry in clinical studies - A discussion of error sources

PubMed Central

2010-01-01

Background Water displacement leg volumetry is a highly reproducible method, allowing the confirmation of efficacy of vasoactive substances. Nevertheless errors of its execution and the selection of unsuitable patients are likely to negatively affect the outcome of clinical studies in chronic venous insufficiency (CVI). Discussion Placebo controlled double-blind drug studies in CVI were searched (Cochrane Review 2005, MedLine Search until December 2007) and assessed with regard to efficacy (volume reduction of the leg), patient characteristics, and potential methodological error sources. Almost every second study reported only small drug effects (≤ 30 mL volume reduction). As the most relevant error source the conduct of volumetry was identified. Because the practical use of available equipment varies, volume differences of more than 300 mL - which is a multifold of a potential treatment effect - have been reported between consecutive measurements. Other potential error sources were insufficient patient guidance or difficulties with the transition from the Widmer CVI classification to the CEAP (Clinical Etiological Anatomical Pathophysiological) grading. Summary Patients should be properly diagnosed with CVI and selected for stable oedema and further clinical symptoms relevant for the specific study. Centres require a thorough training on the use of the volumeter and on patient guidance. Volumetry should be performed under constant conditions. The reproducibility of short term repeat measurements has to be ensured. PMID:20070899

Swallow segmentation with artificial neural networks and multi-sensor fusion.

PubMed

Lee, Joon; Steele, Catriona M; Chau, Tom

2009-11-01

Swallow segmentation is a critical precursory step to the analysis of swallowing signal characteristics. In an effort to automatically segment swallows, we investigated artificial neural networks (ANN) with information from cervical dual-axis accelerometry, submental MMG, and nasal airflow. Our objectives were (1) to investigate the relationship between segmentation performance and the number of signal sources and (2) to identify the signals or signal combinations most useful for swallow segmentation. Signals were acquired from 17 healthy adults in both discrete and continuous swallowing tasks using five stimuli. Training and test feature vectors were constructed with variances from single or multiple signals, estimated within 200 ms moving windows with 50% overlap. Corresponding binary target labels (swallow or non-swallow) were derived by manual segmentation. A separate 3-layer ANN was trained for each participant-signal combination, and all possible signal combinations were investigated. As more signal sources were included, segmentation performance improved in terms of sensitivity, specificity, accuracy, and adjusted accuracy. The combination of all four signal sources achieved the highest mean accuracy and adjusted accuracy of 88.5% and 89.6%, respectively. A-P accelerometry proved to be the most discriminatory source, while the inclusion of MMG or nasal airflow resulted in the least performance improvement. These findings suggest that an ANN, multi-sensor fusion approach to segmentation is worthy of further investigation in swallowing studies.

[Classification of Priority Area for Soil Environmental Protection Around Water Sources: Method Proposed and Case Demonstration].

PubMed

Li, Lei; Wang, Tie-yu; Wang, Xiaojun; Xiao, Rong-bo; Li, Qi-feng; Peng, Chi; Han, Cun-liang

2016-04-15

Based on comprehensive consideration of soil environmental quality, pollution status of river, environmental vulnerability and the stress of pollution sources, a technical method was established for classification of priority area of soil environmental protection around the river-style water sources. Shunde channel as an important drinking water sources of Foshan City, Guangdong province, was studied as a case, of which the classification evaluation system was set up. In detail, several evaluation factors were selected according to the local conditions of nature, society and economy, including the pollution degree of heavy metals in soil and sediment, soil characteristics, groundwater sensitivity, vegetation coverage, the type and location of pollution sources. Data information was mainly obtained by means of field survey, sampling analysis, and remote sensing interpretation. Afterwards, Analytical Hierarchy Process (AHP) was adopted to decide the weight of each factor. The basic spatial data layers were set up respectively and overlaid based on the weighted summation assessment model in Geographical Information System (GIS), resulting in a classification map of soil environmental protection level in priority area of Shunde channel. Accordingly, the area was classified to three levels named as polluted zone, risky zone and safe zone, which respectively accounted for 6.37%, 60.90% and 32.73% of the whole study area. Polluted zone and risky zone were mainly distributed in Lecong, Longjiang and Leliu towns, with pollutants mainly resulted from the long-term development of aquaculture and the industries containing furniture, plastic constructional materials and textile and clothing. In accordance with the main pollution sources of soil, targeted and differentiated strategies were put forward. The newly established evaluation method could be referenced for the protection and sustainable utilization of soil environment around the water sources.

Source impacts by volatile organic compounds in an industrial city of southern Taiwan.

PubMed

Liu, Pao-Wen Grace; Yao, Yung-Chen; Tsai, Jiun-Horng; Hsu, Yi-Chyun; Chang, Li-Peng; Chang, Ken-Hui

2008-07-15

This study investigates source impacts by airborne volatile organic compounds (VOC) at two sites designated for traffic and industry, in the largest industrial area Kaohsiung, southern Taiwan. The samples were collected at the two sites simultaneously during rush and non-rush hours in summer and autumn seasons. Same pattern of VOC groups were found at both sites: most abundant aromatics (78-95%) followed by alkanes (2-16%) and alkenes (0-6%). The BTEX concentration measured at the two sites ranged from 69 to 301 ppbC. Toluene, isopentane, ethylbenzene, and benzene were found to be the most abundant species. Speciation of VOCs was characterized with several skills including principal component factor analysis and BTEX characteristic ratios. Each of the resulted principal factors at the two sites explained over 80% of the VOCs data variance, and indicated that both of the sampling sites were influenced by both traffic and industrial sources with separately different levels. The remarkable patterns of the first two factors described not only the similarity but also the discrepancy at the two sampling sites, in terms of the source impacts. The high T/B ratios (7.56-14.25) observed at the industrial site implied the important impact from mobile emissions. The indicators, m,p-xylene/benzene and o-xylene/benzene, also confirmed the potential source of motor vehicles at both of the sampling sites. Air age assessment showed that more than half of the total observations located in the domain of fresh air. Low X/E ratios implied somewhat aged air mass transported to the sampling sites. The industrial site might not only encounter emissions from the industry sources, but also under unavoidable impact from the traffic sources.

Innovative culture in long-term care settings: the influence of organizational characteristics.

PubMed

Nieboer, Anna P; Strating, Mathilde M H

2012-01-01

Innovative cultures have been reported to enhance the creation and implementation of new ideas and working methods in organizations. Although there is considerable research on the impact of organizational context on the innovativeness of organizations, the same is not the case for research on the organizational characteristics responsible for an innovative culture in (long-term) care settings. The aim of this study was to identify organizational characteristics that explain innovative culture in the (long-term) care sector. A large cross-sectional study in Dutch long-term care-nursing homes and/or elderly homes, care organizations for the handicapped, and long-term mental health care organizations-was conducted. A total of 432 managers and care professionals in 37 organizations participated. The Group Innovation Inventory was used to measure innovative culture in long-term care organizations. Structural characteristics of the organization were centralization and formalization, environmental dynamism and competitiveness, internal and external exchange of information, leadership style, commitment to quality improvement, and the organization's innovative strategy. The determinants of an innovative culture were estimated with a two-level random-intercepts and fixed-slopes model. Multilevel regression models were used to account for the organizational clustering of individuals within the 37 care organizations. Environmental dynamism, job codification, formal external exchange of information, transformational leadership, commitment to quality, and an exploratory and exploitative innovation strategy were all significantly correlated with an innovative culture in the multivariate multilevel analysis; the other characteristics were not. The explained organizational- and individual-level variance was 52.5% and 49.2%, respectively. The results point to substantial differences in innovative cultures between and within care organizations that can, in part, be explained by organizational characteristics. Efforts must be made to ensure that organizational characteristics such as environmental dynamism do not hamper the development of innovative cultures in long-term care organizations. Organizations' human resource practices and knowledge management are particularly promising in strengthening innovative cultures.

The effects of sorting by aeolian processes on the geochemical characteristics of surface materials: a wind tunnel experiment

NASA Astrophysics Data System (ADS)

Wang, Xunming; Lang, Lili; Hua, Ting; Zhang, Caixia; Li, Hui

2018-03-01

The geochemical characteristics of aeolian and surface materials in potential source areas of dust are frequently employed in environmental reconstructions as proxies of past climate and as source tracers of aeolian sediments deposited in downwind areas. However, variations in the geochemical characteristics of these aeolian deposits that result from near-surface winds are currently poorly understood. In this study, we collected surface samples from the Ala Shan Plateau (a major potential dust source area in Central Asia) to determine the influence of aeolian processes on the geochemical characteristics of aeolian transported materials. Correlation analyses show that compared with surface materials, the elements in transported materials (e.g., Cu, As, Pb, Mn, Zn, Al, Ca, Fe, Ga, K, Mg, P, Rb, Co, Cr, Na, Nb, Si, and Zr) were subjected to significant sorting by aeolian processes, and the sorting also varied among different particle size fractions and elements. Variations in wind velocity were significantly correlated with the contents of Cr, Ga, Sr, Ca, Y, Nd, Zr, Nb, Ba, and Al, and with the Zr/Al, Zr/Rb, K/Ca, Sr/Ca, Rb/Sr, and Ca/Al ratios. Given the great variation in the geochemical characteristics of materials transported under different aeolian processes relative to those of the source materials, these results indicate that considerable uncertainty may be introduced to analyses by using surface materials to trace the potential source areas of aeolian deposits that accumulate in downwind areas.

Low-flow characteristics of streams in Virginia

USGS Publications Warehouse

Hayes, Donald C.

1991-01-01

Streamflow data were collected and low-flow characteristics computed for 715 gaged sites in Virginia Annual minimum average 7-consecutive-day flows range from 0 to 2,195 cubic feet per second for a 2-year recurrence interval and from 0 to 1,423 cubic feet per second for a 10-year recurrence interval. Drainage areas range from 0.17 to 7,320 square miles. Existing and discontinued gaged sites are separated into three types: long-term continuous-record sites, short-term continuous-record sites, and partial-record sites. Low-flow characteristics for long-term continuous-record sites are determined from frequency curves of annual minimum average 7-consecutive-day flows . Low-flow characteristics for short-term continuous-record sites are estimated by relating daily mean base-flow discharge values at a short-term site to concurrent daily mean discharge values at nearby long-term continuous-record sites having similar basin characteristics . Low-flow characteristics for partial-record sites are estimated by relating base-flow measurements to daily mean discharge values at long-term continuous-record sites. Information from the continuous-record sites and partial-record sites in Virginia are used to develop two techniques for estimating low-flow characteristics at ungaged sites. A flow-routing method is developed to estimate low-flow values at ungaged sites on gaged streams. Regional regression equations are developed for estimating low-flow values at ungaged sites on ungaged streams. The flow-routing method consists of transferring low-flow characteristics from a gaged site, either upstream or downstream, to a desired ungaged site. A simple drainage-area proration is used to transfer values when there are no major tributaries between the gaged and ungaged sites. Standard errors of estimate for108 test sites are 19 percent of the mean for estimates of low-flow characteristics having a 2-year recurrence interval and 52 percent of the mean for estimates of low-flow characteristics having a 10-year recurrence interval . A more complex transfer method must be used when major tributaries enter the stream between the gaged and ungaged sites. Twenty-four stream networks are analyzed, and predictions are made for 84 sites. Standard errors of estimate are 15 percent of the mean for estimates of low-flow characteristics having a 2-year recurrence interval and 22 percent of the mean for estimates of low-flow characteristics having a 10-year recurrence interval. Regional regression equations were developed for estimating low-flow values at ungaged sites on ungaged streams. The State was divided into eight regions on the basis of physiography and geographic grouping of the residuals computed in regression analyses . Basin characteristics that were significant in the regression analysis were drainage area, rock type, and strip-mined area. Standard errors of prediction range from 60 to139 percent for estimates of low-flow characteristics having a 2-year recurrence interval and 90 percent to 172 percent for estimates of low-flow characteristics having a 10-year recurrence interval.

Primary socialization theory. The influence of the community on drug use and deviance. III.

PubMed

Oetting, E R; Donnermeyer, J F; Deffenbacher, J L

1998-06-01

Primary socialization theory states that drug use and deviance are social behaviors learned predominantly through three sources, the family, the school, and peer clusters. This paper shows that the theory provides a parsimonious explanation of how characteristics of both the local community and the larger extended community influence drug use and deviance. These characteristics affect deviance because they either strengthen or weaken bonding with the three primary socialization sources, or affect the norms that are transmitted through the primary socialization process. The paper considers the following social structure characteristics of the local neighborhood or community: physical characteristics, rurality, ethnicity, heterogeneity, occupational type, mobility, poverty, neighborhood deviance, and age distribution. It also examines how other secondary socialization sources, the extended family, associational groups, religion, the peer environment, and the media influence the primary socialization process and, in turn, drug use and deviance.

Effects of source rocks, soil features and climate on natural gamma radioactivity in the Crati valley (Calabria, Southern Italy).

PubMed

Guagliardi, Ilaria; Rovella, Natalia; Apollaro, Carmine; Bloise, Andrea; De Rosa, Rosanna; Scarciglia, Fabio; Buttafuoco, Gabriele

2016-05-01

The study, which represents an innovative scientific strategy to approach the study of natural radioactivity in terms of spatial and temporal variability, was aimed to characterize the background levels of natural radionuclides in soil and rock in the urban and peri-urban soil of a southern Italy area; to quantify their variations due to radionuclide bearing minerals and soil properties, taking into account nature and extent of seasonality influence. Its main novelty is taking into account the effect of climate in controlling natural gamma radioactivity as well as analysing soil radioactivity in terms of soil properties and pedogenetic processes. In different bedrocks and soils, activities of natural radionuclides ((238)U, (232)Th (4) K) and total radioactivity were measured at 181 locations by means of scintillation γ-ray spectrometry. In addition, selected rocks samples were collected and analysed, using a Scanning Electron Microscope (SEM) equipped with an Energy Dispersive Spectrometer (EDS) and an X-Ray Powder Diffraction (XRPD), to assess the main sources of radionuclides. The natural-gamma background is intimately related to differing petrologic features of crystalline source rocks and to peculiar pedogenetic features and processes. The radioactivity survey was conducted during two different seasons with marked changes in the main climatic characteristics, namely dry summer and moist winter, to evaluate possible effects of seasonal climatic variations and soil properties on radioactivity measurements. Seasonal variations of radionuclides activities show their peak values in summer. The activities of (238)U, (232)Th and (4) K exhibit a positive correlation with the air temperature and are negatively correlated with precipitations. Copyright © 2016 Elsevier Ltd. All rights reserved.

Prediction in the service of comprehension: modulated early brain responses to omitted speech segments.

PubMed

Bendixen, Alexandra; Scharinger, Mathias; Strauß, Antje; Obleser, Jonas

2014-04-01

Speech signals are often compromised by disruptions originating from external (e.g., masking noise) or internal (e.g., inaccurate articulation) sources. Speech comprehension thus entails detecting and replacing missing information based on predictive and restorative neural mechanisms. The present study targets predictive mechanisms by investigating the influence of a speech segment's predictability on early, modality-specific electrophysiological responses to this segment's omission. Predictability was manipulated in simple physical terms in a single-word framework (Experiment 1) or in more complex semantic terms in a sentence framework (Experiment 2). In both experiments, final consonants of the German words Lachs ([laks], salmon) or Latz ([lats], bib) were occasionally omitted, resulting in the syllable La ([la], no semantic meaning), while brain responses were measured with multi-channel electroencephalography (EEG). In both experiments, the occasional presentation of the fragment La elicited a larger omission response when the final speech segment had been predictable. The omission response occurred ∼125-165 msec after the expected onset of the final segment and showed characteristics of the omission mismatch negativity (MMN), with generators in auditory cortical areas. Suggestive of a general auditory predictive mechanism at work, this main observation was robust against varying source of predictive information or attentional allocation, differing between the two experiments. Source localization further suggested the omission response enhancement by predictability to emerge from left superior temporal gyrus and left angular gyrus in both experiments, with additional experiment-specific contributions. These results are consistent with the existence of predictive coding mechanisms in the central auditory system, and suggestive of the general predictive properties of the auditory system to support spoken word recognition. Copyright © 2014 Elsevier Ltd. All rights reserved.

Supersonic Localized Excitations Mediate Microscopic Dynamic Failure

NASA Astrophysics Data System (ADS)

Ghaffari, H. O.; Griffith, W. A.; Pec, M.

2017-12-01

A moving rupture front activates a fault patch by increasing stress above a threshold strength level. Subsequent failure yields fast slip which releases stored energy in the rock. A fraction of the released energy is radiated as seismic waves carrying information about the earthquake source. While this simplified model is widely accepted, the detailed evolution from the onset of dynamic failure to eventual re-equilibration is still poorly understood. To study dynamic failure of brittle solids we indented thin sheets of single mineral crystals and recorded the emitted ultrasound signals (high frequency analogues to seismic waves) using an array of 8 to 16 ultrasound probes. The simple geometry of the experiments allows us to unravel details of dynamic stress history of the laboratory earthquake sources. A universal pattern of failure is observed. First, stress increases over a short time period (1 - 2 µs), followed by rapid weakening (≈ 15 µs). Rapid weakening is followed by two distinct relaxation phases: a temporary quasi-steady state phase (10 µs) followed by a long-term relaxation phase (> 50 µs). We demonstrate that the dynamic stress history during failure is governed by formation and interaction of local non-dispersive excitations, or solitons. The formation and annihilation of solitons mediates the microscopic fast weakening phase, during which extreme acceleration and collision of solitons lead to non-Newtonian behavior and Lorentz contraction, i.e. shortening of solitons' characteristic length. Interestingly, a soliton can propagate as fast as 37 km/s, much faster than the p-wave velocity, implying that a fraction of the energy transmits through soliton excitations. The quasi-steady state phase delays the long-term ageing of the damaged crystal, implying a potentially weaker material. Our results open new horizons for understanding the complexity of earthquake sources, and, more generally, non-equilibrium relaxation of many body systems.

Seasonal and event-scale controls on dissolved organic carbon and nitrate flushing from catchments

NASA Astrophysics Data System (ADS)

Sebestyen, S. D.; Boyer, E. W.; Shanley, J. B.; Doctor, D. H.

2005-05-01

To explore terrestrial and aquatic linkages controlling nutrient dynamics in forested catchments, we collected high-frequency samples from 2002 to 2004 at the Sleepers River Research Watershed in northeastern Vermont USA. We measured DOC (dissolved organic carbon), SUVA (specific UV absorbance), nitrate, and major ion concentrations over a wide range of flow conditions. In addition, weekly samples since 1991 provide a longer term record of stream nutrient fluxes. During events, DOC concentrations increased with flow consistent with the flushing of a large reservoir of mobile organic carbon from forest soils. Higher concentrations of DOC and SUVA in the growing versus dormant season illustrated seasonal variation in sources, characteristics (i.e. reactivity), availability, and controls on the flushing response of organic matter from the landscape to streams. In contrast, stream nitrate concentrations increased with flow but only when catchments "wetted-up" after baseflow periods. Growing season stream nitrate responses were dependent on short-term antecedent moisture conditions indicating rapid depletion of the soil nitrate reservoir when source areas became hydrologically connected to streams. While the different response patterns emphasized variable source and biogeochemical controls in relation to flow patterns, coupled carbon and nitrogen biogeochemical processes were also important controls on stream nutrient fluxes. In particular, leaf fall was a critical time when reactive DOC from freshly decomposing litter fueled in-stream consumption of nitrate leading to sharp declines of stream nitrate concentrations. Our measurements highlight the importance of "hot spots" and "hot moments" of biogeochemical and hydrological processes that control stream responses. Furthermore, our work illustrates how carbon, nitrogen, and water cycles are coupled in catchments, and provides a conceptual model for future work aimed at modeling forest stream hydrochemistry at the catchment scale.

Modernization and unification: Strategic goals for NASA STI program

NASA Technical Reports Server (NTRS)

Blados, W.; Cotter, Gladys A.

1993-01-01

Information is increasingly becoming a strategic resource in all societies and economies. The NASA Scientific and Technical Information (STI) Program has initiated a modernization program to address the strategic importance and changing characteristics of information. This modernization effort applies new technology to current processes to provide near-term benefits to the user. At the same time, we are developing a long-term modernization strategy designed to transition the program to a multimedia, global 'library without walls.' Notwithstanding this modernization program, it is recognized that no one information center can hope to collect all the relevant data. We see information and information systems changing and becoming more international in scope. We are finding that many nations are expending resources on national systems which duplicate each other. At the same time that this duplication exists, many useful sources of aerospace information are not being collected because of resource limitations. If nations cooperate to develop an international aerospace information system, resources can be used efficiently to cover expanded sources of information. We must consider forming a coalition to collect and provide access to disparate, multidisciplinary sources of information, and to develop standardized tools for documenting and manipulating this data and information. In view of recent technological developments in information science and technology, as well as the reality of scarce resources in all nations, it is time to explore the mutually beneficial possibilities offered by cooperation and international resource sharing. International resources need to be mobilized in a coordinated manner to move us towards this goal. This paper reviews the NASA modernization program and raises for consideration new possibilities for unification of the various aerospace database efforts toward a cooperative international aerospace database initiative that can optimize the cost/benefit equation for all participants.

Neuroendocrine mechanisms in pregnancy and parturition.

PubMed

Petraglia, Felice; Imperatore, Alberto; Challis, John R G

2010-12-01

The complex mechanisms controlling human parturition involves mother, fetus, and placenta, and stress is a key element activating a series of physiological adaptive responses. Preterm birth is a clinical syndrome that shares several characteristics with term birth. A major role for the neuroendocrine mechanisms has been proposed, and placenta/membranes are sources for neurohormones and peptides. Oxytocin (OT) is the neurohormone whose major target is uterine contractility and placenta represents a novel source that contributes to the mechanisms of parturition. The CRH/urocortin (Ucn) family is another important neuroendocrine pathway involved in term and preterm birth. The CRH/Ucn family consists of four ligands: CRH, Ucn, Ucn2, and Ucn3. These peptides have a pleyotropic function and are expressed by human placenta and fetal membranes. Uterine contractility, blood vessel tone, and immune function are influenced by CRH/Ucns during pregnancy and undergo major changes at parturition. Among the others, neurohormones, relaxin, parathyroid hormone-related protein, opioids, neurosteroids, and monoamines are expressed and secreted from placental tissues at parturition. Preterm birth is the consequence of a premature and sustained activation of endocrine and immune responses. A preterm birth evidence for a premature activation of OT secretion as well as increased maternal plasma CRH levels suggests a pathogenic role of these neurohormones. A decrease of maternal serum CRH-binding protein is a concurrent event. At midgestation, placental hypersecretion of CRH or Ucn has been proposed as a predictive marker of subsequent preterm delivery. While placenta represents the major source for CRH, fetus abundantly secretes Ucn and adrenal dehydroepiandrosterone in women with preterm birth. The relevant role of neuroendocrine mechanisms in preterm birth is sustained by basic and clinic implications.

Numerical analysis of the heat source characteristics of a two-electrode TIG arc

NASA Astrophysics Data System (ADS)

Ogino, Y.; Hirata, Y.; Nomura, K.

2011-06-01

Various kinds of multi-electrode welding processes are used to ensure high productivity in industrial fields such as shipbuilding, automotive manufacturing and pipe fabrication. However, it is difficult to obtain the optimum welding conditions for a specific product, because there are many operating parameters, and because welding phenomena are very complicated. In the present research, the heat source characteristics of a two-electrode TIG arc were numerically investigated using a 3D arc plasma model with a focus on the distance between the two electrodes. The arc plasma shape changed significantly, depending on the electrode spacing. The heat source characteristics, such as the heat input density and the arc pressure distribution, changed significantly when the electrode separation was varied. The maximum arc pressure of the two-electrode TIG arc was much lower than that of a single-electrode TIG. However, the total heat input of the two-electrode TIG arc was nearly constant and was independent of the electrode spacing. These heat source characteristics of the two-electrode TIG arc are useful for controlling the heat input distribution at a low arc pressure. Therefore, these results indicate the possibility of a heat source based on a two-electrode TIG arc that is capable of high heat input at low pressures.

Enhancing GADRAS Source Term Inputs for Creation of Synthetic Spectra.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Horne, Steven M.; Harding, Lee

The Gamma Detector Response and Analysis Software (GADRAS) team has enhanced the source term input for the creation of synthetic spectra. These enhancements include the following: allowing users to programmatically provide source information to GADRAS through memory, rather than through a string limited to 256 characters; allowing users to provide their own source decay database information; and updating the default GADRAS decay database to fix errors and include coincident gamma information.

Localization of sound sources in a room with one microphone

NASA Astrophysics Data System (ADS)

Peić Tukuljac, Helena; Lissek, Hervé; Vandergheynst, Pierre

2017-08-01

Estimation of the location of sound sources is usually done using microphone arrays. Such settings provide an environment where we know the difference between the received signals among different microphones in the terms of phase or attenuation, which enables localization of the sound sources. In our solution we exploit the properties of the room transfer function in order to localize a sound source inside a room with only one microphone. The shape of the room and the position of the microphone are assumed to be known. The design guidelines and limitations of the sensing matrix are given. Implementation is based on the sparsity in the terms of voxels in a room that are occupied by a source. What is especially interesting about our solution is that we provide localization of the sound sources not only in the horizontal plane, but in the terms of the 3D coordinates inside the room.

A theoretical prediction of the acoustic pressure generated by turbulence-flame front interactions

NASA Technical Reports Server (NTRS)

Huff, R. G.

1984-01-01

The equations of momentum annd continuity are combined and linearized yielding the one dimensional nonhomogeneous acoustic wave equation. Three terms in the non-homogeneous equation act as acoustic sources and are taken to be forcing functions acting on the homogeneous wave equation. The three source terms are: fluctuating entropy, turbulence gradients, and turbulence-flame interactions. Each source term is discussed. The turbulence-flame interaction source is used as the basis for computing the source acoustic pressure from the Fourier transformed wave equation. Pressure fluctuations created in turbopump gas generators and turbines may act as a forcing function for turbine and propellant tube vibrations in Earth to orbit space propulsion systems and could reduce their life expectancy. A preliminary assessment of the acoustic pressure fluctuations in such systems is presented.

A theoretical prediction of the acoustic pressure generated by turbulence-flame front interactions

NASA Technical Reports Server (NTRS)

Huff, R. G.

1984-01-01

The equations of momentum and continuity are combined and linearized yielding the one dimensional nonhomogeneous acoustic wave equation. Three terms in the non-homogeneous equation act as acoustic sources and are taken to be forcing functions acting on the homogeneous wave equation. The three source terms are: fluctuating entropy, turbulence gradients, and turbulence-flame interactions. Each source term is discussed. The turbulence-flame interaction source is used as the basis for computing the source acoustic pressure from the Fourier transformed wave equation. Pressure fluctuations created in turbopump gas generators and turbines may act as a forcing function for turbine and propellant tube vibrations in earth to orbit space propulsion systems and could reduce their life expectancy. A preliminary assessment of the acoustic pressure fluctuations in such systems is presented.

Analysis of the load selection on the error of source characteristics identification for an engine exhaust system

NASA Astrophysics Data System (ADS)

Zheng, Sifa; Liu, Haitao; Dan, Jiabi; Lian, Xiaomin

2015-05-01

Linear time-invariant assumption for the determination of acoustic source characteristics, the source strength and the source impedance in the frequency domain has been proved reasonable in the design of an exhaust system. Different methods have been proposed to its identification and the multi-load method is widely used for its convenience by varying the load number and impedance. Theoretical error analysis has rarely been referred to and previous results have shown an overdetermined set of open pipes can reduce the identification error. This paper contributes a theoretical error analysis for the load selection. The relationships between the error in the identification of source characteristics and the load selection were analysed. A general linear time-invariant model was built based on the four-load method. To analyse the error of the source impedance, an error estimation function was proposed. The dispersion of the source pressure was obtained by an inverse calculation as an indicator to detect the accuracy of the results. It was found that for a certain load length, the load resistance at the frequency points of one-quarter wavelength of odd multiples results in peaks and in the maximum error for source impedance identification. Therefore, the load impedance of frequency range within the one-quarter wavelength of odd multiples should not be used for source impedance identification. If the selected loads have more similar resistance values (i.e., the same order of magnitude), the identification error of the source impedance could be effectively reduced.

Identification and modification of dominant noise sources in diesel engines

NASA Astrophysics Data System (ADS)

Hayward, Michael D.

Determination of dominant noise sources in diesel engines is an integral step in the creation of quiet engines, but is a process which can involve an extensive series of expensive, time-consuming fired and motored tests. The goal of this research is to determine dominant noise source characteristics of a diesel engine in the near and far-fields with data from fewer tests than is currently required. Pre-conditioning and use of numerically robust methods to solve a set of cross-spectral density equations results in accurate calculation of the transfer paths between the near- and far-field measurement points. Application of singular value decomposition to an input cross-spectral matrix determines the spectral characteristics of a set of independent virtual sources, that, when scaled and added, result in the input cross spectral matrix. Each virtual source power spectral density is a singular value resulting from the decomposition performed over a range of frequencies. The complex relationship between virtual and physical sources is estimated through determination of virtual source contributions to each input measurement power spectral density. The method is made more user-friendly through use of a percentage contribution color plotting technique, where different normalizations can be used to help determine the presence of sources and the strengths of their contributions. Convolution of input measurements with the estimated path impulse responses results in a set of far-field components, to which the same singular value contribution plotting technique can be applied, thus allowing dominant noise source characteristics in the far-field to also be examined. Application of the methods presented results in determination of the spectral characteristics of dominant noise sources both in the near- and far-fields from one fired test, which significantly reduces the need for extensive fired and motored testing. Finally, it is shown that the far-field noise time history of a physically altered engine can be simulated through modification of singular values and recalculation of transfer paths between input and output measurements of previously recorded data.

Event terms in the response spectra prediction equation and their deviation due to stress drop variations

NASA Astrophysics Data System (ADS)

Kawase, H.; Nakano, K.

2015-12-01

We investigated the characteristics of strong ground motions separated from acceleration Fourier spectra and acceleration response spectra of 5% damping calculated from weak and moderate ground motions observed by K-NET, KiK-net, and the JMA Shindokei Network in Japan using the generalized spectral inversion method. The separation method used the outcrop motions at YMGH01 as reference where we extracted site responses due to shallow weathered layers. We include events with JMA magnitude equal to or larger than 4.5 observed from 1996 to 2011. We find that our frequency-dependent Q values are comparable to those of previous studies. From the corner frequencies of Fourier source spectra, we calculate Brune's stress parameters and found a clear magnitude dependence, in which smaller events tend to spread over a wider range while maintaining the same maximum value. We confirm that this is exactly the case for several mainshock-aftershock sequences. The average stress parameters for crustal earthquakes are much smaller than those of subduction zone, which can be explained by their depth dependence. We then compared the strong motion characteristics based on the acceleration response spectra and found that the separated characteristics of strong ground motions are different, especially in the lower frequency range less than 1Hz. These differences comes from the difference between Fourier spectra and response spectra found in the observed data; that is, predominant components in high frequency range of Fourier spectra contribute to increase the response in lower frequency range with small Fourier amplitude because strong high frequency component acts as an impulse to a Single-Degree-of-Freedom system. After the separation of the source terms for 5% damping response spectra we can obtain regression coefficients with respect to the magnitude, which lead to a new GMPE as shown in Fig.1 on the left. Although stress drops for inland earthquakes are 1/7 of the subduction-zone earthquakes, we can see linear regression works quite well. After this linear regression we correlate residuals as a function of Brune's stress parameters of corresponding events as shown in Fig.1 on the right for the case of 1Hz. We found quite good linear correlation, which makes aleatoric uncertainty 40 to 60 % smaller than the original.

The associations between personality characteristics and absenteeism: a cross-sectional study in workers with and without depressive and anxiety disorders.

PubMed

Vlasveld, Moniek C; van der Feltz-Cornelis, Christina M; Anema, Johannes R; van Mechelen, Willem; Beekman, Aartjan T F; van Marwijk, Harm W J; Penninx, Brenda W J H

2013-09-01

Although numerous studies have identified risk factors for sickness absence, few studies have addressed the role of personality characteristics in absenteeism. The aim of this study was to examine the associations of the Big 5 personality characteristics (neuroticism, extraversion, openness, agreeableness and conscientiousness) and locus of control with absenteeism, taking the presence of depressive and anxiety disorders into account. Cross-sectional data from the baseline measurement of the Netherlands Study of Depression and Anxiety (NESDA) were examined. NESDA includes persons with current or remitted depressive and anxiety disorders and healthy controls, of which 1883 working participants were selected. Personality characteristics were included as predictor variables, short-term (0-2 weeks) and long-term (>2 weeks) absenteeism as outcome measure. The presence of depressive and anxiety disorders was considered as modifying covariate. In healthy workers, high neuroticism, external locus of control, low extraversion, low agreeableness and low conscientiousness were associated with short-term absenteeism. In addition, high neuroticism, low extraversion and low openness were related to long-term absenteeism in healthy workers. In workers with psychopathology, similar associations were found for persons with this profile (high neuroticism, external locus of control, low extraversion and low conscientiousness) with long-term absenteeism, but no associations of these characteristics were found with short-term absenteeism. Personality characteristics were significantly associated with work absenteeism in both workers with and without anxiety or depression. Interventions aimed at preventing sickness absence may focus on reducing neuroticism and strengthening extraversion, conscientiousness and locus of control.

Changing demographics and state fiscal outlook: the case of sales taxes.

PubMed

Mullins, D R; Wallace, S

1996-04-01

"Broad-scale demographic changes have implications for state and local finance in terms of the composition of the base of revenue sources and their yields. This article examines the effect of such changes on the potential future yield of consumption-based taxes. The effect of household characteristics and composition on the consumption of selected groups of goods subject to ad valorem retail sales taxes is estimated, generating demographic elasticities of consumption. These elasticities are applied to projected demographic changes in eight states through the year 2000. The results show rather wide variation in expected consumption shifts and potential tax bases across the states, with income growth having the greatest effect...." The geographical focus is on the United States. excerpt

Overview of β-Glucans from Laminaria spp.: Immunomodulation Properties and Applications on Biologic Models

PubMed Central

Bonfim-Mendonça, Patrícia de Souza; Capoci, Isis Regina Grenier; Tobaldini-Valerio, Flávia Kelly; Negri, Melyssa; Svidzinski, Terezinha Inez Estivalet

2017-01-01

Glucans are a group of glucose polymers that are found in bacteria, algae, fungi, and plants. While their properties are well known, their biochemical and solubility characteristics vary considerably, and glucans obtained from different sources can have different applications. Research has described the bioactivity of β-glucans extracted from the algae of the Laminaria genus, including in vivo and in vitro studies assessing pro- and anti-inflammatory cytokines, vaccine production, inhibition of cell proliferation, and anti- and pro-oxidant activity. Thus, the objective of this article was to review the potential application of β-glucans from Laminaria spp. in terms of their immunomodulatory properties, microorganism host interaction, anti-cancer activity and vaccine development. PMID:28878139

A simple theoretical model for ⁶³Ni betavoltaic battery.

PubMed

Zuo, Guoping; Zhou, Jianliang; Ke, Guotu

2013-12-01

A numerical simulation of the energy deposition distribution in semiconductors is performed for ⁶³Ni beta particles. Results show that the energy deposition distribution exhibits an approximate exponential decay law. A simple theoretical model is developed for ⁶³Ni betavoltaic battery based on the distribution characteristics. The correctness of the model is validated by two literature experiments. Results show that the theoretical short-circuit current agrees well with the experimental results, and the open-circuit voltage deviates from the experimental results in terms of the influence of the PN junction defects and the simplification of the source. The theoretical model can be applied to ⁶³Ni and ¹⁴⁷Pm betavoltaic batteries. Copyright © 2013 Elsevier Ltd. All rights reserved.

Inhomogeneities and segregation behavior in strontium—barium niobate fibers grown by laser-heated pedestal growth technique. Part II

NASA Astrophysics Data System (ADS)

Erdei, S.; Galambos, L.; Tanaka, I.; Hesselink, L.; Cross, L. E.; Feigelson, R. S.; Ainger, F. W.; Kojima, H.

1996-10-01

Inhomogeneities in Ce-doped and undoped fibers grown by laser-heated pedestal growth (LHPG) along the c- or a- axis were investigated by two-dimensional scanning electron microprobe analysis (SEPMA). SEPMA data indicated that these cores are primarily connected with the source rod compositions utilized and the convection characteristics of the LHPG technique. Ba enrichment and Sr decrease were primarily detected in the cores and qualitatively described in terms of the composition-control mechanism of LHPG, the complex-segregation and a modified Burton—Prim—Slichter (BPS) equation. Certain aspects of defect structure as a complex congruency related phenomenon are also discussed in the paper giving a more complete interpretation of the origin of cores in SBN fibers.

Particle production of vector fields: Scale invariance is attractive

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagstaff, Jacques M.; Dimopoulos, Konstantinos

2011-01-15

In a model of an Abelian vector boson with a Maxwell kinetic term and non-negative mass-squared it is demonstrated that, under fairly general conditions during inflation, a scale-invariant spectrum of perturbations for the components of a vector field, massive or not, whose kinetic function (and mass) is modulated by the inflaton field is an attractor solution. If the field is massless, or if it remains light until the end of inflation, this attractor solution also generates anisotropic stress, which can render inflation weakly anisotropic. The above two characteristics of the attractor solution can source (independently or combined together) significant statisticalmore » anisotropy in the curvature perturbation, which may well be observable in the near future.« less

Effects of drain bias on the statistical variation of double-gate tunnel field-effect transistors

NASA Astrophysics Data System (ADS)

Choi, Woo Young

2017-04-01

The effects of drain bias on the statistical variation of double-gate (DG) tunnel field-effect transistors (TFETs) are discussed in comparison with DG metal-oxide-semiconductor FETs (MOSFETs). Statistical variation corresponds to the variation of threshold voltage (V th), subthreshold swing (SS), and drain-induced barrier thinning (DIBT). The unique statistical variation characteristics of DG TFETs and DG MOSFETs with the variation of drain bias are analyzed by using full three-dimensional technology computer-aided design (TCAD) simulation in terms of the three dominant variation sources: line-edge roughness (LER), random dopant fluctuation (RDF) and workfunction variation (WFV). It is observed than DG TFETs suffer from less severe statistical variation as drain voltage increases unlike DG MOSFETs.

Prader-Willi Syndrome: Causes, Characteristics, Interventions, Long-Term Consequences.

ERIC Educational Resources Information Center

Otto, Tracy L.; Barber, William H.

1992-01-01

An overview of Prader-Willi syndrome, the most common form of dysmorphic genetic obesity associated with mental retardation, is presented, with an emphasis on associated causes, characteristics, diagnosis and counseling, intervention, and long-term consequences. (Author/DB)

Auditing the multiply-related concepts within the UMLS

PubMed Central

Mougin, Fleur; Grabar, Natalia

2014-01-01

Objective This work focuses on multiply-related Unified Medical Language System (UMLS) concepts, that is, concepts associated through multiple relations. The relations involved in such situations are audited to determine whether they are provided by source vocabularies or result from the integration of these vocabularies within the UMLS. Methods We study the compatibility of the multiple relations which associate the concepts under investigation and try to explain the reason why they co-occur. Towards this end, we analyze the relations both at the concept and term levels. In addition, we randomly select 288 concepts associated through contradictory relations and manually analyze them. Results At the UMLS scale, only 0.7% of combinations of relations are contradictory, while homogeneous combinations are observed in one-third of situations. At the scale of source vocabularies, one-third do not contain more than one relation between the concepts under investigation. Among the remaining source vocabularies, seven of them mainly present multiple non-homogeneous relations between terms. Analysis at the term level also shows that only in a quarter of cases are the source vocabularies responsible for the presence of multiply-related concepts in the UMLS. These results are available at: http://www.isped.u-bordeaux2.fr/ArticleJAMIA/results_multiply_related_concepts.aspx. Discussion Manual analysis was useful to explain the conceptualization difference in relations between terms across source vocabularies. The exploitation of source relations was helpful for understanding why some source vocabularies describe multiple relations between a given pair of terms. PMID:24464853

Characterization of Fine Airborne Particulate Collected in Tokyo and Major Atmospheric Emission Sources by Using Single Particle Measurement of SEM-EDX

NASA Astrophysics Data System (ADS)

Sato, K.; Iijima, A.; Furuta, N.

2008-12-01

In our long-term monitoring of size-classified Airborne Particulate Matter (APM) in Tokyo since 1995, it had been demonstrated that toxic elements such as As, Se, Cd, Sb and Pb were extremely enriched in fine APM (PM2.5). However, in that study, total sampled APM on a filter was digested with acids, and thus only averaged elemental composition in fine APM could be obtained. One of the effective methods to determine the origin of APM is single particle measurement by using SEM-EDX. By using characteristic shapes observed by SEM and marker elements contained in APM measured by EDX, detailed information for source identification can be obtained. In this study, fine APM (PM2.5) was collected at various locations such as roadside, diesel vehicle exhaust, a heavy oil combustion plant and a waste incineration plant as well as ambient atmosphere in Tokyo, and characteristics of fine particles that will be utilized for identification of emission sources are elucidated. Fine particles can be classified into 3 main characteristic shape groups; edge-shaped, cotton-like and spherical. Shape of particles collected in a heavy oil combustion plant and a waste incineration plant was mostly spherical, and these particles may be associated with thermal process. Diesel exhaust particles were predominantly cotton-like which may consist of coagulated nano-sized particles. Most of brake abrasion dusts were edge-shaped, which may be associated with mechanical abrasion of brake pads. In the elemental analysis of fine particles, high concentrations of Sb, Cu, Ti and Ba were detected in brake abrasion dusts. Since these elements are major constituents of brake pads, these can be used for marker elements of brake abrasion dusts. High concentration of C was detected in diesel exhaust particles and oil combustion particles, and thus C can be used for marker elements of their origin. Furthermore, high concentrations of C, Ca and K were detected in fly ash from a waste incineration plant, which may be associated with emission from biomass combustion.