sources sci technol: Topics by Science.gov

Sample records for sources sci technol

Excited triplet states as photooxidants in surface waters

NASA Astrophysics Data System (ADS)

Canonica, S.

2012-12-01

The chromophoric components of dissolved organic matter (DOM) are generally the main absorbers of sunlight in surface waters and therefore a source of transient reactants under irradiation. Such short-lived species can be relevant for the fate of various classes of chemical contaminants in the aquatic environment. The present contribution focuses on the role of excited triplet states of chromophoric DOM, 3CDOM*, as transient photooxidants initiating the transformation and degradation of organic chemical contaminants. An early study [1] indicated that 3CDOM* may play a dominant role in the photo-induced transformation of electron-rich phenols, a conclusion which was later fortified by the results of transient absorption investigations using aromatic ketones as model photosensitizers [2] and by a recent careful analysis of the effect of oxygen concentration on transformation rates [3]. The variety of aquatic contaminants shown to be affected by triplet-induced oxidation has kept increasing, phenylurea herbicides [4], sulfonamide antibiotics [5] and some phytoestrogens [6] being prominent examples. Recent research has shown that the triplet-induced transformation of specific contaminants, especially aromatic nitrogen compounds, could be inhibited by the presence of DOM, very probably due to its antioxidant moieties [7]. While such moieties are not relevant for the quenching of 3CDOM*, they are expected to react with it in a similar way as the studied contaminants. Analogous reactions can be postulated to occur in liquid or solid phases of the atmospheric environment, as demonstrated in the case of HONO formation [8]. References 1. Canonica, S.; Jans, U.; Stemmler, K.; Hoigné, J. Transformation kinetics of phenols in water: Photosensitization by dissolved natural organic material and aromatic ketones. Environ. Sci. Technol. 1995, 29 (7), 1822-1831. 2. Canonica, S.; Hellrung, B.; Wirz, J. Oxidation of phenols by triplet aromatic ketones in aqueous solution. J. Phys. Chem. A 2000, 104 (6), 1226-1232. 3. Golanoski, K. S.; Fang, S.; Del Vecchio, R.; Blough, N. V. Investigating the mechanism of phenol photooxidation by humic substances. Environ. Sci. Technol. 2012, 46 (7), 3912-3920. 4. Gerecke, A. C.; Canonica, S.; Müller, S. R.; Schärer, M.; Schwarzenbach, R. P. Quantification of dissolved natural organic matter (DOM) mediated phototransformation of phenylurea herbicides in lakes. Environ. Sci. Technol. 2001, 35 (19), 3915-3923. 5. Boreen, A. L.; Arnold, W. A.; McNeill, K. Triplet-sensitized photodegradation of sulfa drugs containing six-membered heterocyclic groups: Identification of an SO2 extrusion photoproduct. Environ. Sci. Technol. 2005, 39 (10), 3630-3638. 6. Felcyn, J. R.; Davis, J. C. C.; Tran, L. H.; Berude, J. C.; Latch, D. E. Aquatic photochemistry of isoflavone phytoestrogens: Degradation kinetics and pathways. Environ. Sci. Technol. 2012, 46 (12), 6698-6704. 7. Wenk, J.; Canonica, S. Phenolic antioxidants inhibit the triplet-induced transformation of anilines and sulfonamide antibiotics in aqueous solution. Environ. Sci. Technol. 2012, 46 (10), 5455-5462. 8. George, C.; Strekowski, R. S.; Kleffmann, J.; Stemmler, K.; Ammann, M. Photoenhanced uptake of gaseous NO2 on solid-organic compounds: a photochemical source of HONO? Faraday Discuss. 2005, 130, 195-210.
Municipal solid waste and dung cake burning: discoloring the Taj Mahal and human health impacts in Agra

NASA Astrophysics Data System (ADS)

Lal, Raj M.; Nagpure, Ajay S.; Luo, Lina; Tripathi, Sachchida N.; Ramaswami, Anu; Bergin, Michael H.; Russell, Armistead G.

2016-10-01

The Taj Mahal—an iconic World Heritage monument built of white marble—has become discolored with time, due, in part, to high levels of particulate matter (PM) soiling its surface (Bergin et al 2015 Environ. Sci. Technol. 49 808-812). Such discoloration has required extensive and costly treatment (2015 Two Hundred Sixty Second Report on Effects of Pollution on Taj Parliament of India Rajya Sabha, New Delhi) and despite previous interventions to reduce pollution in its vicinity, the haze and darkening persists (Bergin et al 2015 Environ. Sci. Technol. 49 808-812 2015 Two Hundred Sixty Second Report on Effects of Pollution on Taj Parliament of India Rajya Sabha, New Delhi). PM responsible for the soiling has been attributed to a variety of sources including industrial emissions, vehicular exhaust and biomass burning, but the contribution of the emissions from the burning of open municipal solid waste (MSW) may also play an important role. A recent source apportionment study of fine particulate matter (PM2.5) at the Taj Mahal showed biomass burning emissions, which would include MSW emissions, accounted for nearly 40% of organic matter (OM)—a component of PM—deposition to its surface (Bergin et al 2015 Environ. Sci. Technol. 49 808-812) dung cake burning, used extensively for cooking in the region, was the suggested culprit and banned within the city limits (2015 Two Hundred Sixty Second Report on Effects of Pollution on Taj Parliament of India Rajya Sabha, New Delhi), although the burning of MSW, a ubiquitous practice in the area (Nagpure et al 2015 Environ. Sci. Technol. 49 12904-12), may play a more important role in local air quality. Using spatially detailed emission estimates and air quality modeling, we find that open MSW burning leads to about 150 (±130) mg m-2 yr-1 of PM2.5 being deposited to the surface of the Taj Mahal compared to about 12 (±3.2) mg m-2 yr-1 from dung cake burning. Those two sources, combined, also lead to an estimated 713 (377-1050) premature mortalities in Agra each year, dominated by waste burning in socioeconomically lower status neighborhoods. An effective MSW management strategy would reduce soiling of the Taj Mahal, improve human health, and have additional aesthetic benefits.
Studies of Silicon Refractory Metal Interfaces: Photoemission Study of Interface Formation and Compound Nucleation.

DTIC Science & Technology

1983-09-08

1982). 4. A. Hiraki , M.-A. Nicolet, and J.W. Mayer, Appl. Phys. Lett. 18, 178 (1971); A. Hiraki , K. Shuto, S. Kim, W. Kammura, and M. twami, ibid 31...Vac. Sci. Technol. 17, 930 (1980) and references therein. 13 T. Narusera, K. Kinoehica, W. 1. Gibson, and A. Hiraki , J. Vac. Sci. Technol. L$, 272
Chemical Bonding, Interdiffusion and Electronic Structure at InP, GaAs, and Si-Metal Interfaces.

DTIC Science & Technology

1985-10-01

4. H.H. Wieder, J. Vac. Sci. Technol. 15, 1498 (1978). C. 5. W.E. Spicer, 1. Lindau, P. Skeath, C.Y. Su, and P. Chye , Phys. Rev. Lett. 44, 10 420...Spicer, Solid State Electron. 28 307 (1985). 25. N. Newman, K.K. Chin , W.G. Petro, T. Kendelewicz, M.D. Williams, C.E. McCants, and W.E. Spicer, J. Vac...Technol. 19, 661 (1981). 11. Y. Shapira, L.J. Brillson and A. Heller, J. Vac. Sci. U Technol., Al, 766 (1983). 12. P.W. Chye , I. Lindau, P. Pianetta, C.M
EDITORIAL: The 20th European Sectional Conference on Atomic and Molecular Physics of Ionized Gases The 20th European Sectional Conference on Atomic and Molecular Physics of Ionized Gases

NASA Astrophysics Data System (ADS)

Petrović, Zoran Lj; Marić, Dragana; Malović, Gordana

2011-03-01

This special issue consists of papers that are associated with invited lectures, workshop papers and hot topic papers presented at the 20th European Sectional Conference on Atomic and Molecular Physics of Ionized Gases (ESCAMPIG XX). This conference was organized in Novi Sad (Serbia) from 13 to 17 July 2010 by the Institute of Physics of the University of Belgrade. It is important to note that this is not a conference 'proceedings'. Following the initial selection process by the International Scientific Committee, all papers were submitted to the journal by the authors and have been fully peer reviewed to the standard required for publication in Plasma Sources Science and Technology (PSST). The papers are based on presentations given at the conference but are intended to be specialized technical papers covering all or part of the topic presented by the author during the meeting. The ESCAMPIG conference is a regular biennial Europhysics Conference of the European Physical Society focusing on collisional and radiative aspects of atomic and molecular physics in partially ionized gases as well as on plasma-surface interaction. The conference focuses on low-temperature plasma sciences in general and includes the following topics: Atomic and molecular processes in plasmas Transport phenomena, particle velocity distribution function Physical basis of plasma chemistry Plasma surface interaction (boundary layers, sheath, surface processes) Plasma diagnostics Plasma and discharges theory and simulation Self-organization in plasmas, dusty plasmas Upper atmospheric plasmas and space plasmas Low-pressure plasma sources High-pressure plasma sources Plasmas and gas flows Laser-produced plasmas During ESCAMPIG XX special sessions were dedicated to workshops on: Atomic and molecular collision data for plasma modeling, organized by Professors Z Lj Petrovic and N Mason Plasmas in medicine, organized by Dr N Puac and Professor G Fridman. The conference topics were represented in the program by 16 invited lectures, 7 selected hot topics, and 191 poster presentations. The largest number of contributed papers was submitted in Topic 5: Plasma diagnostics (37). The workshop topics were addressed by 10 invited lectures, 5 oral presentations and 7 posters. A post-conference workshop with 5 invited lectures was organized, dealing with the data needs for modeling of plasma sources of light. ESCAMPIG XX was attended by 185 scientists from 31 countries. Of the participants, 30% were PhD students (55). The list includes scientists from the USA, Japan, Australia, Mexico and other non-European countries, which indicates the truly international status of the conference. We would like to thank the authors for their efforts in preparing stimulating lectures and interesting articles for the readers of PSST, and the scientific community dealing with ionized gases, plasma sources and atomic, molecular and chemical physics of low-temperature plasmas for continued interest in the field of ESCAMPIG. We would like to thank the organizers of all previous ESCAMPIG conferences for setting the standards for organization and, in particular, the organizers of ESCAMPIG XVIII and XIX for their direct help and insight. Finally the International Scientific Committee and its chairman in particular have worked hard to select the best possible program and to keep us in line with almost 40 years of tradition and standards of the conference. Most importantly this has been the 20th conference. The quality of new papers shows maturity and new vistas in the field that has produced so much fundamental understanding of complex, non-equilibrium, even nonlinear plasmas. At the same time the field has led to some of the key technologies of modern civilization and has shown that responsible science that pays attention to its societal benefits should have no fear for its future. All critical issues studied today were presented at the meeting and only a small part is represented here. For example, discharges in liquids or above liquids were covered by several lectures represented by two papers. Verreycken et al [1] studied optical emission spectroscopy and Rayleigh scattering in discharges above water electrodes in order to measure gas temperature. At the same time Starikovsky et al [2] showed that it is possible to strike a breakdown directly in the liquid phase without gaseous evaporation or bubbles. Another key issue of present-day low-temperature plasma physics is atmospheric pressure discharges. Application of atmospheric pressure microwave plasma was considered by Belmonte et al [3] as a source for plasma-enhanced chemical vapour deposition. Strategies to produce nanosize structures and high deposition rates have also been proposed. Akishev et al [4] presented modeling results showing why spatial reproducibility of the origins of micro-discharges in a dielectric barrier discharge (DBD) is very high while the stochastic nature of the breakdown leads to jitter. Associated with the application of plasmas in many systems is control plasma chemistry. Tanarro and Herrero [5] performed measurements and modeling of dominant species in a hollow cathode discharge with variation of pressure. Dramatic changes in composition were noticed in H2, H2/Ar, and air. For example, NO becomes the second most abundant neutral under some conditions while at high mean energies H2+ ions become more abundant than H3+. Loureiro et al [6] presented the most detailed self-consistent model of discharges in N2, both pure and in mixtures with H2 and CH4. The model includes coupling of different mechanisms in the gas phase and on surfaces. A further example of detailed plasma chemistry and modeling of possible industrial applications is the work of De Bie et al [7] who studied the conversion of methane to more complex hydrocarbons and other gases in a detailed model of kinetic and plasma chemistry of a DBD reactor. Associated with plasma chemistry models but with a completely different final goal is the work of Taccogna et al [8]. They provide a detailed model of negative ion production in an ITER source of fast neutrals for heating of fusion plasma. Low-temperature plasmas have made their most significant impact through application of etching and other plasma techniques in the production of integrated circuits. Associated with this there have been several papers dealing with control of plasmas relevant for plasma etching applications. Czarnetzki et al [9] presented the modeling of an electrical asymmetry effect which allows independent control of plasma symmetry, bias and consequently properties of ions reaching the surfaces. Separate control of the flux and energy of ions from capacitively coupled plasmas, while an interesting fundamental issue, is also one of the key issues in the manufacture of integrated circuits. Makabe and Yagisawa [10] gave a detailed presentation of the top-down model of plasma devices for etching and other plasma-related nanotechnologies. Their paper presents a complex model covering atomic and molecular collisions and transport, plasma kinetics in complex geometries, and plasma interaction with surfaces with the ability to calculate the development of etched profiles, and the damage-inducing potentials within the wafer. Finally, as the basis of all modeling of plasmas, atomic and molecular collision and transport data were a much more prominent part of ESCAMPIG conferences in the past. We tried to initiate the return of elementary processes to ESCAMPIG from numerous specialized conferences by organizing a workshop on the data for modeling. Bartschat and Zatsarinny [11] gave a presentation of the foundation of the B-spline R-matrix method and a number of cross section results that extend the databases for plasma modeling of atomic gases. State-of-the-art calculations presented here focus on threshold regions of electronic excitation cross sections where complex structures exist due to resonances. These threshold regions of the excitation cross sections, however, determine the distribution function in the region of the ionization, The interface between plasma modeling and atomic physics is swarm studies, and those are based on transport theory that has recently become quite complex and versatile. Dujko et al [12] considered a Boltzmann equation solution to the transport of charged particles, especially in crossed electric and magnetic fields. Apart from indicating the necessity to include transport properties in E × B fields in plasma modeling, these results show complexity and kinetic phenomena that require kinetic models to be properly included. Finally, Makabe and Tatsumi [13] presented the structure of a comprehensive model of plasma etching devices and focused on the requirements for the atomic and collision cross section data. The winner of the W Crookes Prize was Zoltán Donkó [14] who gave a review of particle-in-cell and Monte Carlo simulation methods and presented a review of a large number of systems where he and his co-workers have applied this technique. In particular the lecture gives examples of different kinetic phenomena that arise in modeling of different plasmas. This presentation covers both applications in the control of low-pressure capacitively coupled plasmas and DC breakdown and glow discharges as well as the issues of modeling of elementary processes in the gas phase and on surfaces. Finally, to reply to Harold Pinter and his famous quote, apart from the known and the unknown there is the joy of extending the border of the 'known' and sharing it with colleagues at conferences like ESCAMPIG. Every answer that is reached opens new horizons and new realms of the 'unknown' to explore, and conferences like ESCAMPIG have proven to be a continuous source of ideas and inspiration for all colleagues within the field of low-temperature plasmas and elementary processes. We can certainly hope that the 20th ESCAMPIG was no exception in this regard. References Verreycken T, van Gessel A F H, Pageau A and Bruggeman P 2011 Plasma Sources Sci. Technol. 20 024002 Starikovsky A, Yang Y, Cho Y I and Fridman A 2011 Plasma Sources Sci. Technol. 20 024003 Belmonte T, Gries T, Cardoso R P, Arnoult R, Kosior F and Henrion G 2011 Plasma Sources Sci. Technol. 20 024004 Akishev Y, Aponin G, Balakirev A, Grushin M, Karalnik V, Petryakov A and Trushkin N 2011 Plasma Sources Sci. Technol. 20 024005 Tanarro I and Herrero V J 2011 Plasma Sources Sci. Technol. 20 024006 Loureiro J, Guerra V, Sá P A, Pintassilgo C D and Lino da Silva M 2011 Plasma Sources Sci. Technol. 20 024007 De Bie C, Martens T, van Dijk, Paulussen S, Verheyde B and Bogaerts A 2011 Plasma Sources Sci. Technol. 20 024008 Taccogna F, Minelli P, Diomede P, Longo S, Capitelli M and Schneider R 2011 Plasma Sources Sci. Technol. 20 024009 Czarnetzki U, Schulze J, Schungel E and Donkó Z 2011 Plasma Sources Sci. Technol. 20 024010 Makabe T and Yagisawa T 2011 Plasma Sources Sci. Technol. 20 024011 Bartschat K and Zatsarinny O 2011 Plasma Sources Sci. Technol. 20 024012 Dujko S, White R D, Petrovic Z Lj and Robson R E 2011 Plasma Sources Sci. Technol. 20 024013 Makabe T and Tatsumi T 2011 Plasma Sources Sci. Technol. 20 024014 Donkó Z 2011 Plasma Sources Sci. Technol. 20 024001
Improved Understanding of Fenton-like Reactions for the In Situ Remediation of Contaminated Groundwater Including Treatment of Sorbed Contaminants and Destruction of DNAPLs

DTIC Science & Technology

2006-04-29

Dehalogenation of Chlorinated Methanes by Iron Metal.” Environ . Sci. Technol. 28, 2045-2053. McBride, M.B. Environmental Chemistry of Soils; Oxford Press: New...Oxidative Transformation of Triclosan and Chlorophene by Manganese Oxides. Environ . Sci. Technol. 2003, 37, 2421-2430 Zhang, Y., Crittenden, J.C...prepared under contract to the Department of Defense Strategic Environmental Research and Development Program (SERDP). The publication of this report does
Helicon antenna radiation patterns in a high-density hydrogen linear plasma device

NASA Astrophysics Data System (ADS)

Caneses, J. F.; Blackwell, B. D.; Piotrowicz, P.

2017-11-01

Antenna radiation patterns in the vicinity of a helicon antenna are investigated in hydrogen plasmas produced in the MAGPIE linear plasma device. Using a uniform cold-plasma full-wave code, we model the wave physics in MAGPIE and find good agreement with experimental wave measurements. We show for the first time which antenna elements in a helicon device couple most strongly to the plasma and discuss the physical mechanism that determines this effect. Helicon wavefields in the near field of the antenna are best described in terms of the group velocity and ray direction, while far from the antenna, helicon wavefields behave like plane waves and are best described in terms of eigen-modes. In addition, we present recent 2D axis-symmetric full-wave simulations of the 120 kW helicon source in ProtoMPEX [Rapp et al., IEEE Trans. Plasma Sci. 44(12), 3456-3464 (2016); Caughman et al., J. Vac. Sci. Technol. Vac. Surf. Films 35, 03E114 (2017); and Goulding et al., Fusion Sci. Technol. 72(4), 588-594 (2017)] ( n e ˜ 5 × 1019 m-3, B 0 ˜ 70 mT, and f = 13.56 MHz) where the antenna radiation patterns are evident, and we provide an interpretation of the numerical results using the ideas developed in this paper.
Superlow Friction Behavior of Diamond-Like Carbon Coatings: Time and Speed Effects

DTIC Science & Technology

2001-04-23

Tribol. Lett. 4, 259 ~1998!. 10 A. Erdemir, O. L. Eryilmaz, I. B. Nilufer, and G. R. Fenske , Surf. Coat. Technol. 133–134, 448 ~2000!. 11 A. Erdemir...O. L. Eryilmaz, and G. Fenske , J. Vac. Sci. Technol. A 18, 1987 ~2000!. 12 Thermohygrometer readings for all tests were 0.0% RH with an accuracy of 1
Process diagnostics and monitoring using the multipole resonance probe in an inhomogeneous plasma for ion-assisted deposition of optical coatings

NASA Astrophysics Data System (ADS)

Styrnoll, T.; Harhausen, J.; Lapke, M.; Storch, R.; Brinkmann, R. P.; Foest, R.; Ohl, A.; Awakowicz, P.

2013-08-01

The application of a multipole resonance probe (MRP) for diagnostic and monitoring purposes in a plasma ion-assisted deposition (PIAD) process is reported. Recently, the MRP was proposed as an economical and industry compatible plasma diagnostic device (Lapke et al 2011 Plasma Sources Sci. Technol. 20 042001). The major advantages of the MRP are its robustness against dielectric coating and its high sensitivity to measure the electron density. The PIAD process investigated is driven by the advanced plasma source (APS), which generates an ion beam in the deposition chamber for the production of high performance optical coatings. With a background neutral pressure of p0 ˜ 20 mPa the plasma expands from the source region into the recipient, leading to an inhomogeneous spatial distribution. Electron density and electron temperature vary over the distance from substrate (ne ˜ 109 cm-3 and Te,eff ˜ 2 eV) to the APS (ne ≳ 1012 cm-3 and Te,eff ˜ 20 eV) (Harhausen et al 2012 Plasma Sources Sci. Technol. 21 035012). This huge variation of the plasma parameters represents a big challenge for plasma diagnostics to operate precisely for all plasma conditions. The results obtained by the MRP are compared to those from a Langmuir probe chosen as reference diagnostics. It is demonstrated that the MRP is suited for the characterization of the PIAD plasma as well as for electron density monitoring. The latter aspect offers the possibility to develop new control schemes for complex industrial plasma environments.
Sources & Transport Mechanisms of Sediments in the Oceans.

DTIC Science & Technology

1982-03-31

estuaries 03si e m arh ket. The. peristaltic action, dugt is. pro ~gre- and oceans. The concentration of doe suspended sample was testig were obtained by...waters: Clays Clay Minerals, Seventh National Con - weer: Progress in water technology. v. 7, p. 207-216. ference, p. 1-79. Guess, R. J. (1977), Clay...the (10) ZAbawa, C. Science (Wahigton, D.C) 1978,202,49.4 dlyt Of the GMo wer 45 jum wit a meal portion (11) G b.I J.; Kenwar, L Environ. Sci. Technol
An angle encoder for super-high resolution and super-high accuracy using SelfA

NASA Astrophysics Data System (ADS)

Watanabe, Tsukasa; Kon, Masahito; Nabeshima, Nobuo; Taniguchi, Kayoko

2014-06-01

Angular measurement technology at high resolution for applications such as in hard disk drive manufacturing machines, precision measurement equipment and aspherical process machines requires a rotary encoder with high accuracy, high resolution and high response speed. However, a rotary encoder has angular deviation factors during operation due to scale error or installation error. It has been assumed to be impossible to achieve accuracy below 0.1″ in angular measurement or control after the installation onto the rotating axis. Self-calibration (Lu and Trumper 2007 CIRP Ann. 56 499; Kim et al 2011 Proc. MacroScale; Probst 2008 Meas. Sci. Technol. 19 015101; Probst et al Meas. Sci. Technol. 9 1059; Tadashi and Makoto 1993 J. Robot. Mechatronics 5 448; Ralf et al 2006 Meas. Sci. Technol. 17 2811) and cross-calibration (Probst et al 1998 Meas. Sci. Technol. 9 1059; Just et al 2009 Precis. Eng. 33 530; Burnashev 2013 Quantum Electron. 43 130) technologies for a rotary encoder have been actively discussed on the basis of the principle of circular closure. This discussion prompted the development of rotary tables which achieve reliable and high accuracy angular verification. We apply these technologies for the development of a rotary encoder not only to meet the requirement of super-high accuracy but also to meet that of super-high resolution. This paper presents the development of an encoder with 221 = 2097 152 resolutions per rotation (360°), that is, corresponding to a 0.62″ signal period, achieved by the combination of a laser rotary encoder supplied by Magnescale Co., Ltd and a self-calibratable encoder (SelfA) supplied by The National Institute of Advanced Industrial Science & Technology (AIST). In addition, this paper introduces the development of a rotary encoder to guarantee ±0.03″ accuracy at any point of the interpolated signal, with respect to the encoder at the minimum resolution of 233, that is, corresponding to a 0.0015″ signal period after interpolation of 212 (= 4096) divisions through the interpolator.
The Application of Advanced Diagnostics to the Study of Non-Equilibrium Air Plasmas

DTIC Science & Technology

2002-09-01

26. The 10-, 100-, and 1000-µs pulses monotonically increase with N2 dilution, and the shapes agree with the calculation of Garscadden and Nagpal ...efficiency of H2 in a steady-state H2–N2 gas-mixture discharge has been measured by Nagpal et al.,24 and their analysis of the energy balance showed that...Bletzinger, J. Appl. Phys. 82, 4772 (1997). 49 23. A. Garscadden and R. Nagpal , Plasma Sources Sci. Technol. 4, 268 (1995). 24. R. Nagpal , B. N
Effect of frequency on the uniformity of symmetrical RF CCP discharges

NASA Astrophysics Data System (ADS)

Liu, Yue; Booth, Jean-Paul; Chabert, Pascal

2018-05-01

A 2D Cartesian electrostatic particle-in-cell/Monte Carlo collision (PIC/MCC) model presented previously (Liu et al 2018 Plasma Sources Sci. Technol. 27 025006) is used to investigate the effect of the driving frequency (over the range of 15–45 MHz) on the plasma uniformity in radio frequency (RF) capacitively coupled plasma (CCP) discharges in a geometrically symmetric reactor with a dielectric side wall in argon gas. The reactor size (12 cm electrode length, 2.5 cm gap) and driving frequency are sufficiently small that electromagnetic effects can be ignored. Previously, we showed (Liu et al 2018 Plasma Sources Sci. Technol. 27 025006) that for 15 MHz excitation, Ohmic heating of electrons by the electric field perpendicular to the electrodes is enhanced in a region in front of the dielectric side wall, leading to a maximum in electron density there. In this work we show that increasing the excitation frequency (at constant applied voltage amplitude) not only increases the overall electron heating and density but also causes a stronger, narrower peak in electron heating closer to the dielectric wall, improving the plasma uniformity along the electrodes. This heating peak comes both from enhanced perpendicular electron heating and from the appearance at high frequency of significant parallel heating. The latter is caused by the presence of a significant parallel-direction RF oscillating electric field in the corners. Whereas at the reactor center the sheaths oscillate perpendicularly to the electrodes, near the dielectric edge they move in and out of the corners and must be treated in two dimensions.
Understanding helicon plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tarey, R. D.; Sahu, B. B.; Ganguli, A.

2012-07-15

This paper presents a comprehensive overview of work on the helicon plasmas and also discusses various aspects of RF power deposition in such plasmas. Some of the work presented here is a review of earlier work on theoretical [A. Ganguli et al., Phys. Plasmas 14, 113503 (2007)] and experimental [A. Ganguli et al., Plasma Sources Sci. Technol. 20(1), 015021 (2011)] investigations on helicon plasmas in a conducting cylindrical waveguide for m = -1 mode. This work also presents an approach to investigate the mechanisms by which the helicon and associated Trivelpiece-Gould (TG) waves are responsible for RF power deposition inmore » Helicon discharges. Experiment design adopts the recent theory of damping and absorption of Helicon modes in conducting waveguides [A. Ganguli et al., Phys. Plasmas 14, 113503 (2007)]. The effort has also been made to detect the warm electrons, which are necessary for ionization, because Helicon discharges are of high density, low T{sub e} discharges and the tail of the bulk electron population may not have sufficient high-energy electrons. Experimental set up also comprises of the mirror magnetic field. Measurements using RF compensated Langmuir probes [A. Ganguli et al., Plasma Sources Sci. Technol. 17, 015003 (2008)], B-dot probe and computations based on the theory shows that the warm electrons at low pressure (0.2-0.3 mTorr) Helicon discharges, are because of the Landau damping of TG waves. In collisional environment, at a pressure Almost-Equal-To 10 mTorr, these high-energy electrons are due to the acceleration of bulk electrons from the neighboring regions across steep potential gradients possibly by the formation of double layers.« less
Origin of Ultralow Friction and Wear in Ultrananocrystalline Diamond

DTIC Science & Technology

2008-06-11

Erdemir, G. R. Fenske , A. R. Krauss, D. M. Gruen, T. McCauley, and R. T. Csencsits, Surf. Coat. Technol. 120–121, 565 (1999). [3] S. E. Grillo and J...and A. Erdemir, Tribol. Lett. 21, 51 (2006). [6] A. Erdemir, O. L. Eryilmaz, and G. Fenske , J. Vac. Sci. Technol. A 18, 1987 (2000). [7] L. Sun, Q. Wu... Fenske , C. Zuiker, R. Csencsits, A. R. Krauss, and D. M. Gruen, Tribol. Trans. 40, 667 (1997). [28] Worn and unworn areas were imaged in the same
Helio Moutinho | NREL

Science.gov Websites

length in single grains and the effect of grain boundaries in CdTe, and the effects of defects on the diffraction of CdTe thin films: Effects of CdCl2 treatment, J. Vac. Sci. Technol. A 26, 1068 (2008). H.R
Defense and Arms Control Studies Program

DTIC Science & Technology

1991-01-01

States Military Academy, Poli. Sci. Massachusetts Institute of Technol- ogy, Electr. Eng. Craig Wheeler Cynthia Womack University of California-San...of the Assistant Secretary of Defense (Program Analysis and Evaluation), "Total Force Policy" November 6 - M. Gen. Gene A. Deegan , USMC Vice Director
Localized heating of electrons in ionization zones: Going beyond the Penning-Thornton paradigm in magnetron sputtering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anders, Andre

2014-12-07

The fundamental question of how energy is supplied to a magnetron discharge is commonly answered by the Penning-Thornton paradigm invoking secondary electrons. Huo et al. (Plasma Sources Sci. Technol. 22, 045005, (2013)) used a global discharge model to show that electron heating in the electric field of the magnetic presheath is dominant. In this contribution, this concept is applied locally taking into account the electric potential structure of ionization zones. Images of ionization zones can and should be interpreted as diagrams of the localization of electric potential and related electron energy, where certain collisions promote or dampen their formation.
Particle Deposition onto Enclosure Surfaces

DTIC Science & Technology

2009-08-20

Deposition on Semiconductor Wafers," Aerosol Sci. Technol. 6, 215 (1987). 3. S. E. Pratsinis, T. T. Kodas , M. P. Dudukovic, and S. K. Friedlander...29, 511 (1998). 11. T. T. Kodas , "Generation of Complex Metal Oxides by Aerosol Processes: Superconducting Ceramic Particles and Films," Adv. Mater
High Energy Density Dielectrics for Pulsed Power Applications

DTIC Science & Technology

2008-09-01

Energy/Power/Thermal Division //Signature// DEREK M. LINCOLN, Major, USAF Deputy Chief Energy/Power/Thermal Division Propulsion Directorate...comparative study," J. Vac. Sci. Technol. A 16, (1998), 2804-2815. 11 T.T. Leung and C.W. Ong . “Nearly amorphous to epitxial growth of aluminum nitride

Richard Ahrenkiel | NREL

Science.gov Websites

Kuciauskas, J Tynan, "Dual-sensor technique for characterization of carrier lifetime decay transients in semiconductors", Journal of Applied Physics 116 (21), 214510 (2014) J. Moseley, M.M. Al-Jassim, H.R For Contactless Measurement of Carrier Lifetime", J. Vac. Sci. Technol. B 31, 04D113 R. K
Cyclodextrin-Enhanced In Situ Removal of Organic Contaminants from Groundwater at Department of Defense Sites

DTIC Science & Technology

2004-05-01

Advantage Nontoxic to humans and resident microbial populations Cyclodextrins are widely used in pharmaceuticals, food processing, and cosmetics ...dechlorination of tetrachloroethene by the Fenton reaction. Environ. Sci. Technol., 17 (9): 1689-1694. 25. Yin, Y., Allen, H.E., 1999: In situ chemical
Post-CMOS Micromachining of Surface and Bulk Structures

DTIC Science & Technology

2002-05-06

Structures iii Acknowledgements I would like to thank my advisors, Professor Gary K. Fedder and Professor Dave W. Greve, for their continuing support...Donnelly, Plasma Chem. Plasma Process, vol. 1, pp. 37, 1981. [54] J. L. Mauer, J. S. Logan, L. B. Zielinski , and G. S. Schwartz, J. Vac. Sci. Technol
Optoelectronic Integration

DTIC Science & Technology

1992-03-20

34 Interband Transitions in InGaAs/GaAs Strained Layer Superlattices ," J. of Vac. Sci and Technol. B, Vol. 7(5), pp. 1106-1110, 1989. 33 B. Kh...2 II. C. Resonant Cavity-Enhanced Photodetectors ................................ .............. 3 II. D. Wavelength Selective Optoelectronic...Simultions of Electronic States in Semiconductor Quantum Wells and Superlattices under Electrical Field ................................ ....... 5 II. G . G
Contact Formation (Hg, CD)Te

DTIC Science & Technology

1989-12-01

Davis, W.A. Beck, D.G. Kilday, J.T. McKinley, and G. Margaritondo, J. Vac. Sci. Technol. A 7, 870 (1989). 312 J.M. Pawlikowski, Acta Physica Polonica A49...139 (1976). J.M. Pawlikowski, Acta Physica Polonica A49, 563 (1976). J.M. Pawlikowski, Acta Physica Polonica A51, 95 (1977). SJ.M. Pawlikowski, Phys
Navigating Tensions between Conceptual and Metaconceptual Goals in the Use of Models

ERIC Educational Resources Information Center

Delgado, Cesar

2015-01-01

Science education involves learning about phenomena at three levels: concrete (facts and generalizations), conceptual (concepts and theories), and metaconceptual (epistemology) (Snir et al. in "J Sci Educ Technol" 2(2):373-388, 1993). Models are key components in science, can help build conceptual understanding, and may also build…
Impedance Spectroscopy as a Tool for Non-Intrusive Detection of Extracellular Mediators in Microbial Fuel Cells

DTIC Science & Technology

2009-12-01

bioseparation. Hoboken, NJ: John Wiley & Sons, p. 267. HernandezME, Kappler A, Newman DK. 2004. Phenazines and other redox active antibiotics promote...Verstraete W. 2005. Microbial phenazine production enhances electron transfer in biofuel cells. Environ Sci Technol 39:3401. Ramasamy RP, Ren Z, Mench MM
Reduced PM2.5 Emissions for Military Gas Turbine Engines using Fuel Additives

DTIC Science & Technology

2006-08-12

indicator of the presence of PAH species in hydrocarbon flames [ Naegeli 1998, Bomse 1992]. Although fluorescence originates from a wide range of aromatic...Env. Sci. Technol., 32:2033, 1998. Mueller, M. , R Yetter, F. Dryer, ChemKinet 31 (1999) 705-724. Naegeli , D.W. and K.H. Childress, "Lower
Chaiwat Engtrakul | NREL

Science.gov Websites

, College Park B.S. Chemistry, Gettysburg College Featured Publications M.Z. Hu, C. Engtrakul, B.L. Bischoff Applications." Separ. Sci. Technol., 53, 528-543. C. Engtrakul, M.Z. Hu, B.L. Bischoff, G.G. Jang (2016 Catalytic Fast Pyrolysis of Pine Biomass." Energy Fuels, 30, 8343-8348. C. Engtrakul, C. Mukarakate
Electrolytic Transformation of Hexahydro-1,3,5-Trinitro-1,3,5-Triazine (RDX) and 2,4,6-Trinitrotoluene (TNT) in Aqueous Solutions

DTIC Science & Technology

2005-08-01

several years (Bunce et al. 1997; de Lima Leite et al. 2003; Panizza and Cerisola 2004). Treatment is achieved by either oxidation (anodic) or...and mixed anaerobic cultures," Environ. Sci. Technol. 35, 4341-4346. Panizza , M., and Cerisola, G. (2004). "Influence of anode material on the
Strained InGaAs/InAlAs Quantum Wells for Complementary III-V Transistors

DTIC Science & Technology

2014-01-01

GaAs substrates for low power and high frequency applications, J. Appl. Phys. 109 (2011) 033706. [28] A. Ali, H. Madan , A. Agrawal, I. Ramirez, R...Growth of InAsSb-channel high electron mobility transistor structures, J. Vac. Sci. Technol. B 23 (2005) 1441–1444. [30] A. Ali, H. Madan , M.J
Finite Element Modeling of Viscoelastic Behavior and Interface Damage in Adhesively Bonded Joints

DTIC Science & Technology

2012-01-01

eccentricity of the axis of a lap joint gives rise to transverse or peel stresses at the Report Documentation Page Form ApprovedOMB No. 0704-0188...Computers and Structures 29, 1011 (1988). 21 S. Roy and J. N. Reddy, Tire Sci. Technol. 16, 146 (1988). 22 S. Roy and J. N. Reddy, Intl. J. Numer
Investigation of Schottky Barriers

DTIC Science & Technology

1989-12-01

W. E. Spicer, I. Lindau, P. R. Skeath, C. Y. Su and P. W. Chye , Phys. Rev. Lett. 44, 420 (1980); W. E. Spicer, P. W. Chye , P. R. Skeath, C. Y. Su and...Kahn, D. G. Kilday, and G. Margaritondo, J. Vac. Sci. Technol. B5, 987 (1987). 8. R. Cao, K. Miyano, T. Kendelewicz, K. K. Chin , I. Lindau, and W. E
Development of a Miniature Snapshot Multispectral Imager

DTIC Science & Technology

2010-09-01

ZnS ) and SiO2, however since ITC had no prior experience with ZnS , the next best choice of TiO2 and SiO2 was selected for fabrication of dielectric...Bass, S. J.; Apsley, N. High Quality InP /InGaAs Fabry-Perrot Etalons Grown by AP MOCVD. Semicon. Sci. Technol. 1987, 2, 466–467. 13. Szipocs, R
Changes in redox properties of humic acids upon sorption to alumina

NASA Astrophysics Data System (ADS)

Subdiaga, Edisson; Orsetti, Silvia; Jindal, Sharmishta; Haderlein, Stefan B.

2016-04-01

1. Introduction A prominent role of Natural Organic Matter (NOM) in biogeochemical processes is its ability to act as an electron shuttle, accelerating rates between a bulk electron donor and an acceptor. The underlying processes are reversible redox reactions of quinone moieties.1 This shuttling effect has been studied in two major areas: transformation of redox active pollutants and microbial respiration.2-3 Previous studies primarily compared effects in the presence or absence of NOM without addressing the redox properties of NOM nor its speciation. The interaction between humic acids (HA) and minerals might change properties and reactivity of organic matter. Specifically, we investigate whether changes in the redox properties of a HA occur upon sorption to redox inactive minerals. Since fractionation and conformational rearrangements of NOM moieties upon sorption are likely to happen, the redox properties of the NOM fractions upon sorption might differ as well. 2. Materials and methods Elliot Soil Humic Acid (ESHA), Pahokee Peat Humic Acid (PPHA) and Suwannee River Humic Acid (SRHA) were used as received from IHSS. Aluminum oxide (Al2O3) was suspended in 0.1M KCl. Sorption was studied at pH 7.0 in duplicate batch experiments for several HA/Al2O3 ratios. For the suspension (mineral + sorbed HA, plus dissolved HA), the filtrate (0.45μm) and the HA stock solution, the electron donating and accepting capacities (EDC and EAC) were determined following established procedures.4 3. Results All studied HA-Al2O3 systems showed similar behavior with regard to changes in redox properties. There was a significant increase in the EDC of the whole suspension compared to the stock solutions and the non-sorbed HA in the filtrate (up to 300% for PPHA). This effect was more pronounced with increasing amounts of sorbed HA in the suspension. Although ESHA had the highest sorption capacity on Al2O3 (~ 6 times higher than PPHA & SRHA), it showed the smallest changes in redox properties upon sorption. Considering the total electron exchange capacities, significant changes were found mainly at higher amounts of sorbed PPHA and SRHA. 4. Conclusions Overall, our results suggest a change in the redox properties of sorbed HA but not for the dissolved fraction. The sorbed fraction showed a higher redox capacity than the stock samples. Given the absence of redox transfer between the HA and the redox inert aluminum oxide, such changes might be due to conformational changes in the humic substances. 5. References [1] Scott D., Mcknight, D., Blunt-Harris, E., Kolesar, S., Lovley, A. Environ. Sci. Technol. 1998, 32, 2984-2989. [2] Dunnivant, F. Schwarzenbach, R., Macalady, D. Environ. Sci. Technol. 1992, 26(11), 2133-2141. [3] Jiang, J. & Kappler, A. Environ. Sci. Technol. 2008, 42(10), 3562-3569. [4] Aeschbacher, M., Sander M., Schwarzenbach, R. Environ. Sci. Technol. 2010, 44(1), 87-93.
Electrolytic Transformation of Hexyhydro-1,3,5-Trinitro-1,3,5-Triazine (RDX) and 2,4,6-Trinitrotoluene (TNT) in Aqueous Solutions

DTIC Science & Technology

2005-08-01

several years (Bunce et al. 1997; de Lima Leite et al. 2003; Panizza and Cerisola 2004). Treatment is achieved by either oxidation (anodic) or reduction...Hexahydro-1,3,5-trinitro- 1,3,5-triazine mineralization by zerovalent iron and mixed anaerobic cultures,” Environ. Sci. Technol. 35, 4341-4346. Panizza
Electrolytic Transformation of Hexahydro-1,3,5-Trinitro-1,3,5-Triazine (RDX) and 2,4,6-Trintrotoluene (TNT) in Aqueous Solutions

DTIC Science & Technology

2005-08-01

several years (Bunce et al. 1997; de Lima Leite et al. 2003; Panizza and Cerisola 2004). Treatment is achieved by either oxidation (anodic) or reduction...Hexahydro-1,3,5-trinitro- 1,3,5-triazine mineralization by zerovalent iron and mixed anaerobic cultures,” Environ. Sci. Technol. 35, 4341-4346. Panizza
Nutrient Recycling Impacts by Zebra Mussels in Harper’s Ferry Slough, Upper Mississippi River

DTIC Science & Technology

2000-12-01

ing pro duc tiv ity in the slough (also see Caraco et al. (1997)). In Harper’s Ferry Slough and other aquatic sys tems, the mag ni tude of ze bra mus...the Upper Mississippi River with zebra mussels (Dreissena polymorpha),” Environ. Sci. Technol. 33, 4385-4390. ERDC WQTN-PD-07 December 2000 11 Caraco , N
Combustion of Alane and Aluminum with Water for Hydrogen and Thermal Energy Generation

DTIC Science & Technology

2010-01-01

Herr, Green Rocket Propulsion by Reaction of Al and Mg Powders and Water, AIAA 2004-4037, 2004. [9] J.L. Sabourin , G.A. Risha, R.A. Yetter, S.F. Son...Wiley and Sons, Inc., 1992. [32] G.A. Risha, J.L. Sabourin , V. Yang, R.A. Yetter, S.F. Son, B.C. Tappan, Combust. Sci. Technol. 180 (2008) 2127–2142
Approximating the nonlinear density dependence of electron transport coefficients and scattering rates across the gas-liquid interface

NASA Astrophysics Data System (ADS)

Garland, N. A.; Boyle, G. J.; Cocks, D. G.; White, R. D.

2018-02-01

This study reviews the neutral density dependence of electron transport in gases and liquids and develops a method to determine the nonlinear medium density dependence of electron transport coefficients and scattering rates required for modeling transport in the vicinity of gas-liquid interfaces. The method has its foundations in Blanc’s law for gas-mixtures and adapts the theory of Garland et al (2017 Plasma Sources Sci. Technol. 26) to extract electron transport data across the gas-liquid transition region using known data from the gas and liquid phases only. The method is systematically benchmarked against multi-term Boltzmann equation solutions for Percus-Yevick model liquids. Application to atomic liquids highlights the utility and accuracy of the derived method.

A high brightness source for nano-probe secondary ion mass spectrometry

NASA Astrophysics Data System (ADS)

Smith, N. S.; Tesch, P. P.; Martin, N. P.; Kinion, D. E.

2008-12-01

The two most prevalent ion source technologies in the field of surface analysis and surface machining are the Duoplasmatron and the liquid metal ion source (LMIS). There have been many efforts in this area of research to develop an alternative source [ S.K. Guharay, J. Orloff, M. Wada, IEEE Trans. Plasma Sci. 33 (6) (2005) 1911; N.S. Smith, W.P. Skoczylas, S.M. Kellogg, D.E. Kinion, P.P. Tesch, O. Sutherland, A. Aanesland, R.W. Boswell, J. Vac. Sci. Technol. B 24 (6) (2006) 2902-2906] with the brightness of a LMIS and yet the ability to produce secondary ion yield enhancing species such as oxygen. However, to date a viable alternative has not been realized. The high brightness and small virtual source size of the LMIS are advantageous for forming high resolution probes but a significant disadvantage when beam currents in excess of 100 nA are required, due to the effects of spherical aberration from the optical column. At these higher currents a source with a high angular intensity is optimal and in fact the relatively moderate brightness of today's plasma ion sources prevail in this operating regime. Both the LMIS and Duoplasmatron suffer from a large axial energy spread resulting in further limitations when forming focused beams at the chromatic limit where the figure-of-merit is inversely proportional to the square of the energy spread. Also, both of these ion sources operate with a very limited range of ion species. This article reviews some of the latest developments and some future potential in this area of instrument development. Here we present an approach to source development that could lead to oxygen ion beam SIMS imaging with 10 nm resolution, using a 'broad area' RF gas phase ion source.
Recent Naval Postgraduate School Publications.

DTIC Science & Technology

1985-09-30

of the performance of a new storm tracking methodology Prepared for Naval Environmental Prediction Res. Facility Monterey, Calif., Naval Postgraduate...Aerospace Sci. Mtg., Jr’., 1983. Sarpkaya, T; Storm , M A ydrodynamic forces from combined wave and current flow on smooth and rough circular cylinders...Houston, Tx., May, 1982. IN Proc 1982 Offshore Technol. Conf., vol. 1, p.731-736, (1982). Sarpkaya, T; Storm , M A ydrodynamic forces from combined wave
Impaired Clearance And Enhanced Pulmonary Inflammatory/Fibrotic Response To Carbon Nanotubes In Myeloperoxidase-Deficient Mice

DTIC Science & Technology

2012-03-30

utilized SWCNT, it is highly likely that multi-walled carbon nanotubes, fullerenes , graphene and other carbonaceous particles may also undergo MPO...screening and analysis system to distinguish between the organic tissue and the inorganic SWCNT (under bright field imaging settings). Optically...Cytotoxicity of carbon nanomaterials: single-wall nanotube, multi-wall nanotube, and fullerene . Environ Sci Technol 39: 1378–1383. 7. Kisin ER, Murray
A New Family of Schroder's Method and Its Variants Based on Power Means for Multiple Roots of Nonlinear Equations

ERIC Educational Resources Information Center

Kanwar, V.; Sharma, Kapil K.; Behl, Ramandeep

2010-01-01

In this article, we derive one-parameter family of Schroder's method based on Gupta et al.'s (K.C. Gupta, V. Kanwar, and S. Kumar, "A family of ellipse methods for solving non-linear equations", Int. J. Math. Educ. Sci. Technol. 40 (2009), pp. 571-575) family of ellipse methods for the solution of nonlinear equations. Further, we introduce new…
Reactive high power impulse magnetron sputtering

NASA Astrophysics Data System (ADS)

Gudmundsson, J. T.; Magnus, F.; Tryggvason, T. K.; Sveinsson, O. B.; Olafsson, S.

2012-10-01

Here we discuss reactive high power impulse magnetron sputtering sputtering (HiPIMS) [1] of Ti target in an Ar/N2 and Ar/O2 atmosphere. The discharge current waveform is highly dependent on both the pulse repetition frequency and discharge voltage. The discharge current increases with decreasing frequency or voltage. This we attribute to an increase in the secondary electron emission yield during the self-sputtering phase of the pulse, as nitride [2] or oxide [3] forms on the target. We also discuss the growth of TiN films on SiO2 at temperatures of 22-600 ^oC. The HiPIMS process produces denser films at lower growth temperature and the surface is much smoother and have a significantly lower resistivity than dc magnetron sputtered films on SiO2 at all growth temperatures due to reduced grain boundary scattering [4].[4pt] [1] J. T. Gudmundsson, N. Brenning, D. Lundin and U. Helmersson, J. Vac. Sci. Technol. A, 30 030801 (2012)[0pt] [2] F. Magnus, O. B. Sveinsson, S. Olafsson and J. T. Gudmundsson, J. Appl. Phys., 110 083306 (2011)[0pt] [3] F. Magnus, T. K. Tryggvason, S. Olafsson and J. T. Gudmundsson, J. Vac. Sci. Technol., submitted 2012[0pt] [4] F. Magnus, A. S. Ingason, S. Olafsson and J. T. Gudmundsson, IEEE Elec. Dev. Lett., accepted 2012
Anthropogenic Osmium in Airborne Particles from Woods Hole, Massachusetts, USA

NASA Astrophysics Data System (ADS)

Peucker-Ehrenbrink, B.; Sen, I. S.; Geboy, N.

2012-12-01

The global geochemical cycle of osmium has been significantly disturbed by the introduction of automobile exhaust catalysts to convert noxious gas emissions into more benign forms. Anthropogenic osmium has been reported in rainwater, snow, and in the urban airborne particles from around the world to reveal global-scale osmium pollution [1, 2]. In this study, we report on the platinum group element (PGE) concentrations and osmium isotope ratios of airborne particles (PM10) collected in Woods Hole, a small coastal town in Massachusetts to better understand inputs of anthropogenic osmium to rural environments. We further investigate the use of osmium isotopes to track sources of airborne particles and support source apportionment studies on a continental scale. The samples used in this study were collected at Woods Hole Oceanographic Institution over one year (2008-2009). From this collection twelve samples for which the backward air mass trajectories have been determined were selected for osmium isotope analyses. Our results show that the osmium and platinum concentrations are an order of magnitude lower when compared to downtown Boston [2]. The average Os, Pt and Ir concentrations are 0.006±0.012, 0.019±0.023, and 0.685±0.634 pg m-3, respectively. The 187Os/188Os of the aerosols range from 0.275 to 0.788. As continental crust is radiogenic (187Os/188Os >1) and PGE ore bodies generally have unradiogenic 187Os/188Os (~0.2), the unradiogenic 187Os/188Os signature of the aerosols indicates anthropogenic contributions. With 95% of the total osmium mobilization on land being attributed to human activities [3], it is clear that human imprint on airborne particles is not restricted to urban centers with high traffic flows, but also affects rural environments. Aerosol particles that have backward air mass trajectories from the Southwest, the densely populated and industrialized Eastern seaboard, are characterized by unradiogenic osmium, while air masses from the North have radiogenic signatures. Our results suggest that 187Os/188Os has potential for source apportionment studies. [1] Rauch et al. (2005), Environ. Sci. Technol., 39, p. 9464-9470 [2] Chen et al. (2009), PNAS, 106, p. 7724-7728 [3] Sen and Peucker-Ehrenbrink (2012), Environ. Sci. Technol., dx.doi.org/10.102/es301261x
Particle processing technology

NASA Astrophysics Data System (ADS)

Sakka, Yoshio

2014-02-01

In recent years, there has been strong demand for the development of novel devices and equipment that support advanced industries including IT/semiconductors, the environment, energy and aerospace along with the achievement of higher efficiency and reduced environmental impact. Many studies have been conducted on the fabrication of innovative inorganic materials with novel individual properties and/or multifunctional properties including electrical, dielectric, thermal, optical, chemical and mechanical properties through the development of particle processing. The fundamental technologies that are key to realizing such materials are (i) the synthesis of nanoparticles with uniform composition and controlled crystallite size, (ii) the arrangement/assembly and controlled dispersion of nanoparticles with controlled particle size, (iii) the precise structural control at all levels from micrometer to nanometer order and (iv) the nanostructural design based on theoretical/experimental studies of the correlation between the local structure and the functions of interest. In particular, it is now understood that the application of an external stimulus, such as magnetic energy, electrical energy and/or stress, to a reaction field is effective in realizing advanced particle processing [1-3]. This special issue comprises 12 papers including three review papers. Among them, seven papers are concerned with phosphor particles, such as silicon, metals, Si3N4-related nitrides, rare-earth oxides, garnet oxides, rare-earth sulfur oxides and rare-earth hydroxides. In these papers, the effects of particle size, morphology, dispersion, surface states, dopant concentration and other factors on the optical properties of phosphor particles and their applications are discussed. These nanoparticles are classified as zero-dimensional materials. Carbon nanotubes (CNT) and graphene are well-known one-dimensional (1D) and two-dimensional (2D) materials, respectively. This special issue also includes two papers on the fabrication of mechanically reliable nanocomposites by dispersing graphene into a ceramic matrix, and on supercapacitors with high energy densities in a Co(OH)2 system decorated with graphene and carbon nanotubes. As a novel preparation method of oxide films, the fabrication of alumina films with laminated structures by ac anodization is reviewed. Moreover a new type of nanosheet has been fabricated by the exfoliation of layered, ternary transition-metal carbide and nitride compounds, known as Mn + 1AXn phases (or MAX phases) where M is an early transition metal, such as Ti or Nb, A is an A group element, such as Si or Al, X is carbon and/or nitrogen and n = 1-3 [4]. Among the MAX phases, those containing Mo have been theoretically calculated by first-principles calculations to be a source for obtaining Mo2C nanosheets with potentially unique properties. As an example of improving bulk ceramic properties, texturing by using a high magnetic field [5] and sintering by the electric current activated/assisted sintering (ECAS) technology [6] have been demonstrated for ultra-high temperature ceramics with high-temperature strength. A project on the development of materials and particle processing for the field of environment and energy has been ongoing at the National Institute for Materials Science since April 2011. This project employs various core competence technologies for particle processing such as ion beam irradiation for nanoparticle fabrication [7], fullerene nanomaterial processing using liquid-liquid interface precipitation [8], a gas reduction nitridation process to obtain Si3N4-based phosphor materials [9], advanced phosphors via novel processing [10, 11], ultra-high pressure technology for processing and in situ analysis [12, 13], colloidal processing in a high magnetic field to obtain laminated, textured ceramics [1, 3, 5], the ECAS process for nanostructuring ceramics [6] and so forth. Here, I would like to introduce some research achievements that are not covered in this special issue. (1) The evolution of hydrogen by the reaction of fine metal particles such as Al [14] and Mg [15] with water; the specific surface area and surface modification are important factors.(2) The realization of new carbon related materials with 1D and 2D structures consisting of fullerenes prepared by liquid-liquid interface precipitation: alkaline-doped superconductive nanotubes consisting of fullerenes [16], application to solar cells of fullerene/cobalt porphyrin hybrid nanosheets [17], etc.(3) The fabrication of textured films and bulk materials with excellent functional properties by colloidal processing methods such as slip casting [5], gel casting [18] and electrophoretic deposition [3, 19], in a high magnetic field, and with subsequent heating; examples of such materials include dye-sensitized TiO2 solar cells, thermoelectric materials and cathode materials for solid state Li-ion batteries and dielectric ceramics.(4) The fabrication of high-strength and high-toughness MAX phase ceramics [20, 21] inspired by the nacreous structure [22].(5) The modeling and development of the ECAS process [6]. This involves two-step pressure application [23] and high-pressure application above 400 MPa to fabricate transparent oxides [24-26], and rapid heating to obtain dense nanocomposites of ceramic-CNT [27] and diamonds [28].(6) The contraction of ternary phase diagrams for oxide ion conductor systems such as zirconia [29] and apatite systems [30], leading to an increased understanding of the stability of such systems and assisting the search for high oxygen ion conductors. Acknowledgments I am grateful to the authors who have contributed to this special issue, and sincerely hope that the readers will expand their knowledge of particle processing technology. References [1] Sakka Y 2006 J. Ceram. Soc. Japan 114 371 [2] Badica P, Crisan A, Aldica G, Endo K, Borodianska H, Togano K, Awaji S, Vasylkiv O and Sakka Y 2011 Sci. Technol. Adv. Mater. 12 013001 [3] Sakka Y and Uchikoshi T 2010 KONA Powder Particle J. 28 74 (kona.or.jp/search/28_074.pdf) [4] Naguib M, Mashtalir O, Carle J, Presser V, Lu J, Hultman L, Gogotsi Y and Barsoum M W 2012 ACS Nano 6 1322 [5] Sakka Y and Suzuki T S 2005 J. Ceram. Soc. Japan 113 26 [6] Grasso S, Sakka Y and Maizza G 2009 Sci. Technol. Adv. Mater. 10 053001 [7] Nakao H, Tokonami S, Hamada T, Shiigi H, Nagaoka T, Iwate F and Takeda Y 2012 Nanoscale 4 6814 [8] Miyazawa K and Hotta K 2010 J. Cryst. Growth 312 2764 [9] Suehiro T, Xie R and Hirosaki N 2013 Indust. Eng. Chem. Res. 52 7453 [10] Zhu Q, Li J-G, Li X, Sun X and Sakka Y 2011 Sci. Technol. Adv. Mater. 12 055001 [11] Li J, Li J-G, Zhang Z, Wu X, Liu S, Li X, Sun X and Sakka Y 2012 Sci. Technol. Adv. Mater. 13 035007 [12] Kawamura F, Yusa H and Taniguchi T 2012 Appl. Phys. Lett. 100 251910 [13] Watanabe K and Taniguchi T 2011 Int. J. Appl. Ceram. Technol. 8 977 [14] Deng Z-Y, Ferreira J M F and Sakka Y 2008 J. Am. Ceram. Soc. 91 3825 [15] Uda M, Okuyama H, Suzuki T S and Sakka Y 2012 Sci. Technol. Adv. Mater. 13 025009 [16] Takeya H, Kato R, Wakahara T, Miyazawa K, Yamaguchi T, Ozaki T, Okazaki H and Takano Y 2013 Mater. Res. Bull. 48 343 [17] Wakahara T, D'Angelo P, Miyazawa K, Nemoto Y, Ito O, Tanigaki N, Bradley D D C and Anthopoulos T D 2012 J. Am. Chem. Soc. 134 7204 [18] Wiecinska P, Sakka Y, Suzuki T S, Uchikoshi T, Mizerski T and Szafran M 2013 J. Ceram. Soc. Japan 121 89 [19] Kawakita M, Uchikoshi T, Kawakita J and Sakka Y 2009 J. Am. Ceram. Soc. 92 984 [20] Hu C, Sakka Y, Grasso S, Nishimura T, Guo S and Tanaka H 2011 Scr. Mater. 64 765 [21] Hu C, Sakka Y, Nishimura T, Guo S, Grasso S and Tanaka H 2011 Sci. Technol. Adv. Mater. 12 044603 [22] Kakisawa H and Sumitomo T 2011 Sci. Technol. Adv. Mater. 12 064710 [23] Grasso S, Hu C F, Maizza G, Kim B N and Sakka Y 2011 J. Am. Ceram. Soc. 94 1405 [24] Grasso S, Kim B N, Hu C F, Maizza G and Sakka Y 2010 J. Am. Ceram. Soc. 93 2460 [25] Zhang H B, Kim B N, Morita K, Hiraga K, Yoshida H and Sakka Y 2012 Sci. Technol. Adv. Mater. 13 055003 [26] Kim B-N, Hiraga K, Grasso S, Morita K, Yoshida H, Zhang H and Sakka Y 2012 J. Ceram. Soc. Japan 120 116 [27] Estili M, Kawasaki A and Sakka Y 2012 Adv. Mater. 24 4322 [28] Grasso S, Hu C F, Maizza G and Sakka Y 2012 J. Am. Ceram. Soc. 95 2423 [29] Andrievskaya E R, Kornienko O A, Sayir A, Vasylkiv O and Sakka Y 2011 J. Am. Ceram. Soc. 94 1911 [30] Kobayashi K and Sakka Y 2012 Sci. Technol. Adv. Mater. 13 045006
Advanced Coatings from Natural-Based Polymers for Metals

DTIC Science & Technology

2000-07-01

Polyimide Interfaces," J. surfaces using a simple dipping-withdrawing coating Vac. Sci. Technol., 3,1390 (1985).converted into the solid layers by heat...Tang, C.H., "Interface Reaction During Metalliza- more, the Al metal in the substrate favorably interacted tion of Cured Polyimide : An XPS Study," 1...property together with its biocompatability was the reason why CS is widely used in biomedical applications, for example, a bacteriostatic agent, a
Nitrogen Plasma Optimization for High-Quality Dilute Nitrides

DTIC Science & Technology

2005-02-01

Available online 1 February 2005Abstract Growth of GaInNAs by molecular beam epitaxy (MBE) generally requires a nitrogen plasma, which complicates growth...InGaAs and InGaAsP lasers. This paper addresses several of the challenges of plasma-assisted molecular beam epitaxy (MBE) of high-quality dilute nitrides...A.L. Holmes, Using beam flux monitor as Langmuir probe for plasma-assisted molecular beam epitaxy , J. Vac. Sci. Technol. B, in press.
Virtual Impactor for Sub-micron Aerosol Particles

NASA Astrophysics Data System (ADS)

Bolshakov, A. A.; Strawa, A. W.; Hallar, A. G.

2005-12-01

The objective of a virtual impactor is to separate out the larger particles in a flow from the smaller particles in such a way that both sizes of particles are available for sampling. A jet of particle-laden air is accelerated toward a collection probe so that a small gap exists between the acceleration nozzle and the probe. A vacuum is applied to deflect a major portion of the airstream away form the collection probe. Particles larger than a certain size have sufficient momentum so that they cross the deflected streamlines and enter the collection probe, whereas smaller particles follow the deflected streamlines. The result is that the collection probe will contain a higher concentration of larger particles than is in the initial airstream. Typically, virtual impactors are high-flow devices used to separate out particles greater than several microns in diameter. We have developed a special virtual impactor to concentrate aerosol particles of diameters between 0.5 to 1 micron for the purpose of calibrating the optical cavity ring-down instrument [1]. No similar virtual impactors are commercially available. In our design, we have exploited considerations described earlier [2-4]. Performance of our virtual impactor was evaluated in an experimental set-up using TSI 3076 nebulizer and TSI 3936 scanning mobility particle size spectrometer. Under experimental conditions optimized for the best performance of the virtual impactor, we were able to concentrate the 700-nm polystyrene particles no less than 15-fold. However, under experimental conditions optimized for calibrating our cavity ring-down instrument, a concentration factor attainable was from 4 to 5. During calibration experiments, maximum realized particle number densities were 190, 300 and 1600 cm-3 for the 900-nm, 700-nm and 500-nm spheres, respectively. This paper discusses the design of the impactor and laboratory studies verifying its performance. References: 1. A.W. Strawa, R. Castaneda, T. Owano, D.S. Baer, B.A. Paldus, J. Atm. Ocean. Technol., 20, 454-465 (2003). 2. V.A. Marple, K.L. Rubow, B.A. Olson, Aerosol Sci. Technol., 22, 140-150 (1995). 3. B.T. Chen, H.C. Yeh, Y.S. Cheng, J. Aerosol Sci., 16, 343-354 (1985). 4. V.A. Marple, C.M. Chien, Environ. Sci. Technol., 14, 976-985 (1980).
Experimental investigation of concentration and stable isotopes signals during organic contaminants back diffusion

NASA Astrophysics Data System (ADS)

Jin, Biao; Nika, Chrysanthi-Elisabeth; Rolle, Massimo

2017-04-01

Back diffusion of organic contaminants is often the cause of groundwater plumes' persistence and can significantly hinder cleanup interventions [1, 2]. In this study we perform a high-resolution investigation of back diffusion in a well-controlled flow-through laboratory setup. We considered cis-dichloroethene (cis-DCE) as model contaminant and we investigated its back diffusion from an impermeable source into a permeable saturated layer, in which advection-dominated flow conditions were established. We used concentration and stable chlorine isotope measurements to investigate the plumes originated by cis-DCE back diffusion in a series of flow-through experiments, performed in porous media with different hydraulic conductivity and at different seepage velocities (i.e., 0.4, 0.8 and 1.2 m/day). A two-centimeter thick agarose gel layer was placed at the bottom of the setup to simulate the source of cis-DCE back diffusion from an impervious layer. Intensive sampling (>1000 measurements) was carried out, including the withdrawal of aqueous samples at closely spaced (1 cm) outlet ports, as well as the high-resolution sampling of the source zone (agarose gel) at the end of each experiment. The transient behavior of the plumes originated by back diffusion was investigated by sampling the outlet ports at regular intervals in the experiments, each run for a total time corresponding to 15 pore volumes. The high-resolution sampling allowed us to resolve the spatial and temporal evolution of concentration and stable isotope gradients in the flow-through setup. In particular, steep concentration and stable isotope gradients were observed at the outlet. Lateral isotope gradients corresponding to chlorine isotope fractionation up to 20‰ were induced by cis-DCE back diffusion and subsequent advection-dominated transport in all flow-through experiments. A numerical modeling approach, tracking individually all chlorine isotopologues, based on the accurate parameterization of local dispersion, as well as on the values of aqueous diffusion coefficients and diffusion-induced isotope fractionation from a previous study [3], provided a good agreement with the experimental data. References [1] Mackay, D. M.; Cherry, J. A. Groundwater contamination: Pumpand-treat remediation. Environ. Sci. Technol. 1989, 23, 630-636. [2] Parker, B. L.; Chapman, S. W.; Guilbeault, M. A. Plume persistence caused by back diffusion from thin clay layers in a sand aquifer following TCE source-zone hydraulic isolation. J. Contam. Hydrol. 2008, 102, 19-19. [3] Jin, B., Rolle, M., Li, T., Haderlein, S.B., 2014. Diffusive fractionation of BTEX and chlorinated ethenes in aqueous solution: quantification of spatial isotope gradients. Environ. Sci. Technol. 48, 6141-6150.
Using Amphiphilic Nanostructures to Enable Long-Range Ensemble Coalescence and Surface Rejuvenation in Dropwise Condensation

DTIC Science & Technology

2012-01-01

in high-humidity environments. Nature-inspired superhydrophobic surfaces have been actively explored to enhance heat and mass transfer rates by...challenge with superhydrophobic surfaces, as observed in nature on the lotus leaf21 and on synthetic surfaces,22,23 is that they are often rendered...Dynamics. Rev. Mod. Phys. 1985, 57, 827–863. 2. Kim, S. H. Fabrication of Superhydrophobic Surfaces. J. Adhes. Sci. Technol. 2008, 22, 235–250. 3
Rapid Formation of Acrylated Microstructures by Microwave-Induced Thermal Crosslinking

DTIC Science & Technology

2010-01-01

Kagawa, M. Okubo, Chem. Rev. 2008, 108, 3747. [10] C. O. Kappe, D. Dallinger, Nature Rev. Drug Disc. 2006, 5, 51. [11] R. Hoogenboom , U. S. Schubert...of Electronic Imaging 2004, 13. [24] R. M. Paulus, C. R. Becer, R. Hoogenboom , U. S. Schubert, Aust. J. Chem. 2009, 62, 254. [25] S. S. Cutie, D. E...Kohn, Macromolecules 1992, 25, 4476. [27] H. Zhang, R. Hoogenboom , M. Meier, U. Schubert, Meas. Sci. Technol. 2005, 16, 203. 13
Joint Services Electronics Program.

DTIC Science & Technology

1986-09-30

IEEE Computer Society Conference on Trends and Aplications , Gaithersburg, MD, 57-62, May 1983. R.W. Miksad, D.W. Choi and E.J. Powers, "Application of...Estimators for Weakl Nonlinear Esti’mation Problems, M.S. Thesis , Dept. of Electrica Engineering, University of Texas at Austin, May 1982. 7 %- (Page...Chen, J. Vac. Sci. Technol. 17,911 (1980). 6. N.I. Cho, Masters Thesis , unpublished. 7. EI-Saied M. Aly and J.P. Stark, J. Appl. Phys. 53(4), 3063
Scanning Tunneling Microscopy, Atomic Force Microscopy, and Related Techniques

DTIC Science & Technology

1992-02-26

92. (B47) Fujui, T.; Suzuki, MA.; Miyashita, MA.; Yamaguchi, M.; Onuki , T.; Nakamura, H .; Matsubara, T.; Yamada, H .; Nakayamia, K. J. Vac. Sd...and seven deflection detection systems (A 15). (Al) Binnig, G.; Rohrer, H .; Gerber, Ch.; Weibel, E. Phys. Rev. Lett. 1982, 49, 57. (A2) Ray, M.A...J. J. Vac Sci. Technol. A 1ඣ, 9, 44-50. (AS) Scanning Tunneling Microscopy and Related Methods; Behm, RJ., Garcia, N., Rohrer, H ., Eds.; NATO ASI
Enhanced etching of tin-doped indium oxide due to surface modification by hydrogen ion injection

NASA Astrophysics Data System (ADS)

Li, Hu; Karahashi, Kazuhiro; Friederich, Pascal; Fink, Karin; Fukasawa, Masanaga; Hirata, Akiko; Nagahata, Kazunori; Tatsumi, Tetsuya; Wenzel, Wolfgang; Hamaguchi, Satoshi

2018-06-01

It is known that the etching yield (i.e., sputtering yield) of tin-doped indium oxide (ITO) by hydrocarbon ions (CH x +) is higher than its corresponding physical sputtering yield [H. Li et al., J. Vac. Sci. Technol. A 33, 060606 (2015)]. In this study, the effects of hydrogen in the incident hydrocarbon ion beam on the etching yield of ITO have been examined experimentally and theoretically with the use of a mass-selected ion beam system and by first-principles quantum mechanical (QM) simulation. As in the case of ZnO [H. Li et al., J. Vac. Sci. Technol. A 35, 05C303 (2017)], mass-selected ion beam experiments have shown that the physical sputtering yield of ITO by chemically inert Ne ions increases after a pretreatment of the ITO film by energetic hydrogen ion injection. First-principles QM simulation of the interaction of In2O3 with hydrogen atoms shows that hydrogen atoms embedded in In2O3 readily form hydroxyl (OH) groups and weaken or break In–O bonds around the hydrogen atoms, making the In2O3 film less resistant to physical sputtering. This is consistent with experimental observation of the enhanced etching yields of ITO by CH x + ions, considering the fact that hydrogen atoms of the incident CH x + ions are embedded into ITO during the etching process.
PREFACE: Superconductivity in ultrathin films and nanoscale systems Superconductivity in ultrathin films and nanoscale systems

NASA Astrophysics Data System (ADS)

Bianconi, Antonio; Bose, Sangita; Garcia-Garcia, Antonio Miguel

2012-12-01

The recent technological developments in the synthesis and characterization of high-quality nanostructures and developments in the theoretical techniques needed to model these materials, have motivated this focus section of Superconductor Science and Technology. Another motivation is the compelling evidence that all new superconducting materials, such as iron pnictides and chalcogenides, diborides (doped MgB2) and fullerides (alkali-doped C60 compounds), are heterostrucures at the atomic limit, such as the cuprates made of stacks of nanoscale superconducting layers intercalated by different atomic layers with nanoscale periodicity. Recently a great amount of interest has been shown in the role of lattice nano-architecture in controlling the fine details of Fermi surface topology. The experimental and theoretical study of superconductivity in the nanoscale started in the early 1960s, shortly after the discovery of the BCS theory. Thereafter there has been rapid progress both in experiments and the theoretical understanding of nanoscale superconductors. Experimentally, thin films, granular films, nanowires, nanotubes and single nanoparticles have all been explored. New quantum effects appear in the nanoscale related to multi-component condensates. Advances in the understanding of shape resonances or Fano resonances close to 2.5 Lifshitz transitions near a band edge in nanowires, 2D films and superlattices [1, 2] of these nanosized modules, provide the possibility of manipulating new quantum electronic states. Parity effects and shell effects in single, isolated nanoparticles have been reported by several groups. Theoretically, newer techniques based on solving Richardson's equation (an exact theory incorporating finite size effects to the BCS theory) numerically by path integral methods or solving the entire Bogoliubov-de Gennes equation in these limits have been attempted, which has improved our understanding of the mechanism of superconductivity in these confined systems. In addition, the role of thermodynamic fluctuations on superconducting properties has been extensively studied in the context of nanoparticles and nanowires both experimentally and theoretically. In the past decade, a lot of work has been initiated in the area of interface superconductivity where different techniques have been demonstrated to tune Tc. Although the progress in this field has deepened our understanding of nanoscale superconductors, there are several open and key questions which need to be addressed. Some of these are: (1) can superconductivity be enhanced and Tc increased in nanostructures with respect to the bulk limit and if so, how can it be controlled? (2) What are the theoretical and experimental limits for the enhancement and control of superconductivity? (3) Can the phenomena identified in conventional nanostructures shed light on phenomena in high Tc superconductors and vice versa? (4) How will the new fundamental physics of superconductivity at the nanoscale promote advances in nanotechnology applications and vice versa? The papers in this focus section reflect the advances made in this field, in particular in nanowires and nanofilms, but also attempt to answer some of the key open questions outlined above. The theoretical papers explore unconventional quantum phenomena such as the role of confinement in the dynamics of single Cooper pairs in isolated grains [1] and Fano resonances in superconducting gaps in multi-condensate superconductors near a 2.5 Lifshitz transition [2]. Here a new emerging class of quantum phenomena of fundamental physics appear at the Bose-BCS crossover in multi-condensate superconductors [2]. Nanosize effects can now be manipulated by controlling defects in layered oxides [3]. A new approach is provided by controlling the self-organization of oxygen interstitials in layered copper oxides that show an intrinsic nanoscale phase separation [4]. In this case a non-trivial distribution of superconducting nanograins appears to enhance the critical temperature [4]. This is a hot topic as in the past year many works have clarified the nanoscale phase separation in electron-doped chalcogenides, showing the key role of a complex texture of nanograins and opening new avenues for the fundamental understanding of quantum phenomena in networks of superconducting nanograins. The advances in nanotechnology allow the exploration of the possible existence of superconductivity in single carbon nanotubes [5]. The technological applications presented by Gomez [6] and Lehtinen [7] show the fundamental physics of superconductivity at the nanoscale to promote new advances in quantum devices. We hope that this combination will make these focus papers in Superconductor Science and Technology interesting and promote cross-fertilization among the different sub-branches of the field which all share the same goal of addressing the key questions on nanoscale superconductors. References [1]Croitoru M D, Vagov A, Shanenko A A and Axt V M 2012 The Cooper problem in nanoscale: enhancement of the coupling due to confinement Supercond. Sci. Technol. 25 124001 [2]Perali A, Innocenti A, Valletta A and Bianconi A 2012 Anomalous isotope effect near a 2.5 Lifshitz transition in a multi-band multi-condensate superconductor made of a superlattice of stripes Supercond. Sci. Technol. 25 124002 [3]Zeng S W, Huang Z, Wang X, Lü W M, Liu Z Q, Zhang B M, Dhar S, Venkatesan T and Ariando 2012 The influence of La substitution and oxygen reduction in ambipolar La-doped YBa2Cu3Oy thin films Supercond. Sci. Technol. 25 124003 [4]Poccia N, Bianconi A, Campi G, Fratini M and Ricci A 2012 Size evolution of the oxygen interstitial nanowires in La2CuO4+y by thermal treatments and x-ray continuous illumination Supercond. Sci. Technol. 25 124004 [5]Yang Y, Fedorov G, Zhang J, Tselev A, Shafranjuk S and Barbara P 2012 The search for superconductivity at van Hove singularities in carbon nanotubes Supercond. Sci. Technol. 25 124005 [6]Gomez A, Gonzalez E M and Vicent J L 2012 Superconducting vortex dynamics on arrays with bicrystal-like structures: matching and rectifier effects Supercond. Sci. Technol. 25 124006 [7]Lehtinen J S and Arutyunov K Yu 2012 The quantum phase slip phenomenon in superconducting nanowires with a low-Ohmic environment Supercond. Sci. Technol. 25 124007
High Resolution Continuous Flow Analysis System for Polar Ice Cores

NASA Astrophysics Data System (ADS)

Dallmayr, Remi; Azuma, Kumiko; Yamada, Hironobu; Kjær, Helle Astrid; Vallelonga, Paul; Azuma, Nobuhiko; Takata, Morimasa

2014-05-01

In the last decades, Continuous Flow Analysis (CFA) technology for ice core analyses has been developed to reconstruct the past changes of the climate system 1), 2). Compared with traditional analyses of discrete samples, a CFA system offers much faster and higher depth resolution analyses. It also generates a decontaminated sample stream without time-consuming sample processing procedure by using the inner area of an ice-core sample.. The CFA system that we have been developing is currently able to continuously measure stable water isotopes 3) and electrolytic conductivity, as well as to collect discrete samples for the both inner and outer areas with variable depth resolutions. Chemistry analyses4) and methane-gas analysis 5) are planned to be added using the continuous water stream system 5). In order to optimize the resolution of the current system with minimal sample volumes necessary for different analyses, our CFA system typically melts an ice core at 1.6 cm/min. Instead of using a wire position encoder with typical 1mm positioning resolution 6), we decided to use a high-accuracy CCD Laser displacement sensor (LKG-G505, Keyence). At the 1.6 cm/min melt rate, the positioning resolution was increased to 0.27mm. Also, the mixing volume that occurs in our open split debubbler is regulated using its weight. The overflow pumping rate is smoothly PID controlled to maintain the weight as low as possible, while keeping a safety buffer of water to avoid air bubbles downstream. To evaluate the system's depth-resolution, we will present the preliminary data of electrolytic conductivity obtained by melting 12 bags of the North Greenland Eemian Ice Drilling (NEEM) ice core. The samples correspond to different climate intervals (Greenland Stadial 21, 22, Greenland Stadial 5, Greenland Interstadial 5, Greenland Interstadial 7, Greenland Stadial 8). We will present results for the Greenland Stadial -8, whose depths and ages are between 1723.7 and 1724.8 meters, and 35.520 to 35.636 kyr b2k 7), respectively. The results show the conductivity measured upstream and downstream of the debubbler. We will calculate the depth resolution of our system and compare it with earlier studies. 1) Bigler at al, "Optimization of High-Resolution Continuous Flow Analysis For Transient Climate Signals in Ice Cores". Environ. Sci. Technol. 2011, 45, 4483-4489 2) Kaufmann et al, "An Improved Continuous Flow Analysis System for High Resolution Field Measurements on Ice Cores". Environmental Environ. Sci. Technol. 2008, 42, 8044-8050 3) Gkinis, V., T. J. Popp, S. J. Johnsen and T, Blunier, 2010: A continuous stream flash evaporator for the calibration of an IR cavity ring down spectrometer for the isotopic analysis of water. Isotopes in Environmental and Health Studies, 46(4), 463-475. 4) McConnell et al, "Continuous ice-core chemical analyses using inductively coupled plasma mass spectrometry. Environ. Sci. Technol. 2002, 36, 7-11 5) Rhodes et al, "Continuous methane measurements from a late Holocene Greenland ice core : Atmospheric and in-situ signals" Earth and Planetary Science Letters. 2013, 368, 9-19 6) Breton et al, "Quantifying Signal Dispersion in a Hybrid Ice Core Melting System". Environ. Sci. Technol. 2012, 46, 11922-11928 7) Rasmussen et al, " A first chronology for the NEEM ice core". Climate of the Past. 2013, 9, 2967--3013
Water Temperature and Concentration Measurements Within the Expanding Blast Wave of a High Explosive

DTIC Science & Technology

2011-03-15

Please scroll down to see the full text article. 2011 Meas. Sci. Technol. 22 045601 (http://iopscience.iop.org/0957-0233/22/4/045601) Download...Glumac [15] recently demonstrated the use of a Nd:YAG pumped dye laser for absorption measurements (single shot per detonation experiment, 10 ns...weighing 2.6 or 21 g for the 12.7 and 25.4 mm cylinders, respectively. A thin layer of vacuum grease was applied to the face of the detonator so that the
Laser Surface Melting of Stainless Steel Anodes for Reduced Hydrogen Outgassing (Postprint)

DTIC Science & Technology

2016-12-29

including baking [8– 12], vacuum baking [8,11,13,14], polishing [8,14], and surface treatments to create oxide or other protective surface films. Elec...quantity [15] and may necessitate an additional bake to thoroughly degas the surface [8]. The purpose of the work described here was to determine the...9] M. Bernardini, Air bake -out to reduce hydrogen outgassing from stainless steel, J. Vac. Sci. Technol. A Vacuum, Surfaces, Film 16 (1998) 188–193.4

Interface-induced localization in AlSb/InAs heterostructures

NASA Astrophysics Data System (ADS)

Shaw, M. J.; Briddon, P. R.; Jaros, M.

1995-12-01

The existence of localized states at perfect InSb-like interfaces in AlSb/InAs superlattices is predicted from ab initio pseudopotential calculations. Localized states are predicted in both the valence and conduction bands, the former being identifiable with the interface states proposed by Kroemer, Nguyen, and Brar [J. Vac. Sci. Technol. 10, 1769 (1990)]. The existence of these interface localized states is invoked to explain the reported experimental dependence of the band gap upon interface types in such superlattices.
Soil Column Evaluation of Factors Controlling Biodegradation of DNT in the Vadose Zone

DTIC Science & Technology

2003-01-01

Environ. Sci. Technol. 2003, 37, 3382-3391 3382 9 ENVIRONMENTAL SCIENCE & TECHNOLOGY / VOL. 37, NO. 15, 2003 10.1021/es021066s CCC: $25.00  2003 American...American Society of Agronomy: Madison, WI, 1986; pp 363-375. c EPA 600/2-78-054. VOL. 37, NO. 15, 2003 / ENVIRONMENTAL SCIENCE & TECHNOLOGY 9 3383...initial concentration of 2,4-DNT was 5 mM 3384 9 ENVIRONMENTAL SCIENCE & TECHNOLOGY / VOL. 37, NO. 15, 2003 To ensure accurate quantification of
DOE Office of Scientific and Technical Information (OSTI.GOV)

Zarzycki, Piotr; Rosso, Kevin M.

Understanding Fe(II)-catalyzed transformations of Fe(III)- (oxyhydr)oxides is critical for correctly interpreting stable isotopic distributions and for predicting the fate of metal ions in the environment. Recent Fe isotopic tracer experiments have shown that goethite undergoes rapid recrystallization without phase change when exposed to aqueous Fe(II). The proposed explanation is oxidation of sorbed Fe(II) and reductive Fe(II) release coupled 1:1 by electron conduction through crystallites. Given the availability of two tracer exchange data sets that explore pH and particle size effects (e.g., Handler et al. Environ. Sci. Technol. 2014, 48, 11302-11311; Joshi and Gorski Environ. Sci. Technol. 2016, 50, 7315-7324), wemore » developed a stochastic simulation that exactly mimics these experiments, while imposing the 1:1 constraint. We find that all data can be represented by this model, and unifying mechanistic information emerges. At pH 7.5 a rapid initial exchange is followed by slower exchange, consistent with mixed surface- and diffusion-limited kinetics arising from prominent particle aggregation. At pH 5.0 where aggregation and net Fe(II) sorption are minimal, that exchange is quantitatively proportional to available particle surface area and the density of sorbed Fe(II) is more readily evident. Our analysis reveals a fundamental atom exchange rate of ~10-5 Fe nm-2 s-1, commensurate with some of the reported reductive dissolution rates of goethite, suggesting Fe(II) release is the rate-limiting step in the conduction mechanism during recrystallization.« less
The "Mendel syndrome" in science: durability of scientific literature and its effects on bibliometric analysis of individual scientists.

PubMed

Costas, Rodrigo; van Leeuwen, Thed N; van Raan, Anthony F J

2011-10-01

The obsolescence and "durability" of scientific literature have been important elements of debate during many years, especially regarding the proper calculation of bibliometric indicators. The effects of "delayed recognition" on impact indicators have importance and are of interest not only to bibliometricians but also among research managers and scientists themselves. It has been suggested that the "Mendel syndrome" is a potential drawback when assessing individual researchers through impact measures. If publications from particular researchers need more time than "normal" to be properly acknowledged by their colleagues, the impact of these researchers may be underestimated with common citation windows. In this paper, we answer the question whether the bibliometric indicators for scientists can be significantly affected by the Mendel syndrome. Applying a methodology developed previously for the classification of papers according to their durability (Costas et al., J Am Soc Inf Sci Technol 61(8):1564-1581, 2010a; J Am Soc Inf Sci Technol 61(2):329-339, 2010b), the scientific production of 1,064 researchers working at the Spanish Council for Scientific Research (CSIC) in three different research areas has been analyzed. Cases of potential "Mendel syndrome" are rarely found among researchers and these cases do not significantly outperform the impact of researchers with a standard pattern of reception in their citations. The analysis of durability could be included as a parameter for the consideration of the citation windows used in the bibliometric analysis of individuals.
Stochastic Simulation of Isotopic Exchange Mechanisms for Fe(II)-Catalyzed Recrystallization of Goethite.

PubMed

Zarzycki, Piotr; Rosso, Kevin M

2017-07-05

Understanding Fe(II)-catalyzed transformations of Fe(III)-(oxyhydr)oxides is critical for correctly interpreting stable isotopic distributions and for predicting the fate of metal ions in the environment. Recent Fe isotopic tracer experiments have shown that goethite undergoes rapid recrystallization without phase change when exposed to aqueous Fe(II). The proposed explanation is oxidation of sorbed Fe(II) and reductive Fe(II) release coupled 1:1 by electron conduction through crystallites. Given the availability of two tracer exchange data sets that explore pH and particle size effects (e.g., Handler et al. Environ. Sci. Technol. 2014 , 48 , 11302 - 11311 ; Joshi and Gorski Environ. Sci. Technol. 2016 , 50 , 7315 - 7324 ), we developed a stochastic simulation that exactly mimics these experiments, while imposing the 1:1 constraint. We find that all data can be represented by this model, and unifying mechanistic information emerges. At pH 7.5 a rapid initial exchange is followed by slower exchange, consistent with mixed surface- and diffusion-limited kinetics arising from prominent particle aggregation. At pH 5.0 where aggregation and net Fe(II) sorption are minimal, that exchange is quantitatively proportional to available particle surface area and the density of sorbed Fe(II) is more readily evident. Our analysis reveals a fundamental atom exchange rate of ∼10 -5 Fe nm -2 s -1 , commensurate with some of the reported reductive dissolution rates of goethite, suggesting Fe(II) release is the rate-limiting step in the conduction mechanism during recrystallization.
Emission Spectroscopy of Atmospheric-Pressure Ball Plasmoids: Higher Energy Reveals a Rich Chemistry

NASA Astrophysics Data System (ADS)

Dubowsky, Scott E.; Rose, Amber Nicole; Glumac, Nick; McCall, Benjamin J.

2017-06-01

Ball plasmoids (self-sustaining spherical plasmas) are a particularly unique example of a non-equilibrium air plasma. These plasmoids have lifetimes on the order of hundreds of milliseconds without an external power source, however, current models dictate that a ball plasmoid should recombine in a millisecond or less. Ball plasmoids are considered to be a laboratory analogue of natural ball lightning, a phenomenon that has eluded scientific explanation for centuries. We are searching for the underlying physicochemical mechanism(s) by which ball plasmoids and (by extension) ball lightning are stabilized using a variety of diagnostic techniques. This presentation will focus on optical emission spectroscopy (OES) of ball plasmoid discharges between 190-850 nm. The previous generation of OES measurements of this system showed emission from only a few atomic and molecular species, however, the energy available for the discharges in these experiments was limited by the size of the capacitor banks and voltages to which the capacitor banks were charged. We are capable of generating plasmoids at much higher energies, and as a result we are the first to report a very rich chemistry previously not observed in ball plasmoids. We have identified signals from species including NO A^{2}Σ^{+}→X^{2}Π, OH A^{2}Σ^{+}→X^{2}Π, NH A^{3}Π→X^{3}Σ^{-}, AlO A^{2}Π→X^{2}Σ^{+}, NH^{+} B^{2}Δ→X^{2}Π, W I, Al I, Cu I, and H_{α}, all of which have not yet been reported for this system. Analysis of the emission spectra and fitting procedures will be discussed, rotational temperatures of constituent species will be reported, and theories of ball plasmoid stabilization based upon these new results will be presented. Versteegh, A.; Behringer, K.; Fantz, U.; Fussman, G.; Jüttner, B.; Noack, S. Plas. Sour. Sci. Technol. 2008, 17(2), 024014 Stephan, K. D.; Dumas, S.; Komala-Noor, L.; McMinn, J. Plas. Sour. Sci. Technol. 2013, 22(2), 025018
Ultrashort Pulse Inscription of Photonic Structures in ZnSe and GaAs for Mid Infrared Applications

DTIC Science & Technology

2010-08-01

structure shown in Figure 2 is an example of a type I waveguide where guiding occurs in the modified region created at the focus of the fabrication beam...turn produces a refractive index change. The end facet cross sections of type I and type II waveguide structures are illustrated below in Figure 2 and...and E. Mazur, Meas. Sci. Technol. 12, 1784 (2001). 4) A. G. Okhrimchuk, V. K. Mezentsev, H. Schmitz, M. Dubov, and I . Bennion, Laser Phys. 19 1415
Interface Properties of Wide Bandgap Semiconductor Structures

DTIC Science & Technology

1994-06-01

resistive than silicides and their chemistry with 126I I Si-based materials more complex. However, in a series of studies, M. 0. Aboelfotoh et al. have...clarification of these issues. CuGe contacts on Ge:GaN and Mg:GaN. To date, the properties of Cu3Ge films have been documented by Aboelfotoh et al., but the...Martin, V. Malhotra, and J. E. Mahan, J. Vac. Sci. Technol. B 3, 836 (1985). 25. L. Krusin-Elbaum and M. 0. Aboelfotoh , Appl. Phys. Lett. 58(12), 1341
Chemical Bonding, Interdiffusion and Electronic Structure at InP, GaAs, and Si-Metal Interfaces.

DTIC Science & Technology

1984-01-15

1980) 420. 37. A. Hiraki , K. Shuts. F. Kim. W. Kammura. and W. Iwami, A\\ppl. Phys. Len. 31 (1977) 611, and references therein. 38. L.J. Brilison, C.F...and references therein. 5. A. Hiraki , M.A. Nicolet, and J.W. Mayer, Appi. Phys. Lett. !a, 178 (1971); A. Hiraki , K. Shuto, F. Kim, W. Kammura, and W...IZ, 1005 (1980) and references therein. 7. T. Narusawa, K. Kinoshita, W.M. Gibson, and A. Hiraki , J. Vac. Sci. Technol.. Ia. 872 (1981). 8. J
Encapsulation and Annealing of Sulfur and Selenium Implanted Gallium Arsenide

DTIC Science & Technology

1978-03-24

Nisse, and F. L. Vook, Plenum Press, New York 1974 (p. 141). 3. J. A. Borders and S. T. Picraux, Proc. IEEE 62, 1224 (1974). 4. A. Hiraki , M. A. Nicolet...and J. W. Mayer, Appl. Phys. Letters 18, 178 (1971). 5. A. Hiraki and E. Lugujjo, J. Vacuum Sci. Technol. 9, 155 (1972). 6. A. Hiraki , E. Lugujjo, M...A. Nicolet, and J. W. Mayer, phys. stat. sol (a) 7, 401 (1971). 7. A. Hiraki , E. Lugujjo, and J. W. Mayer, J. Appl. Phys. 43, 3643 (1972). 8. J. M
Development of Toxicity Benchmarks for Nitrogen-based Energetic Materials for the Enchytraeid Worm, Enchytraeus crypticus

DTIC Science & Technology

2013-11-01

pp 177–182. Anzhi, Z.L.; Marx, K.A.; Walker, J.; Kaplan, D.L. Trinitrotoluene and Metabolites Binding to Humic Acid . Environ. Sci. Technol. 1997...2001, pp 293–312. Thorn, K.A.; Kennedy, K.R. 15 N NMR Investigation of the Covalent Binding of Reduced TNT Amines to Soil Humic Acid , Model...9 3.2 Toxicity of Reference Toxicant, Boric Acid , to the Potworm E. crypticus ......15 3.3 Effects of 2,4-DNT on the Potworm E. crypticus
Amplification of terahertz pulses in gases beyond thermodynamic equilibrium

NASA Astrophysics Data System (ADS)

Schwaab, G. W.; Schroeck, K.; Havenith, M.

2007-03-01

In Ebbinghaus [Plasma Sources Sci. Technol. 15, 72 (2006)] we reported terahertz time-domain spectroscopy in a plasma at low pressure, we observed a simultaneous absorption and amplification process within each single rotational transition. Here we show that this observation is a direct consequence of the short interaction time of the pulsed terahertz radiation with the plasma, which is shorter than the average collision time between the molecules. Thus, during the measurement time the molecular states may be considered entangled. Solution of the time-dependent Schrödinger equation yields a linear term that may be neglected for long observation times, large frequencies, or nonentangled states. We determine the restrictions for the observation of this effect and calculate the spectrum of a simple diatomic molecule. Using this model we are able to explain the spectral features showing a change from emission to absorption as observed previously. In addition we find that the amplification and absorption do not follow the typical Lambert-Beer exponential law but an approximate square law.
DOE Office of Scientific and Technical Information (OSTI.GOV)

Kokkoris, George; Boudouvis, Andreas G.; Gogolides, Evangelos

An integrated framework for the neutral flux calculation inside trenches and holes during plasma etching is described, and a comparison between the two types of structure in a number of applications is presented. First, a detailed and functional set of equations for the neutral and ion flux calculations inside long trenches and holes with cylindrical symmetry is explicitly formulated. This set is based on early works [T. S. Cale and G. B. Raupp, J. Vac. Sci. Technol. B 8, 1242 (1990); V. K. Singh et al., J. Vac. Sci. Technol. B 10, 1091 (1992)], and includes new equations for themore » case of holes with cylindrical symmetry. Second, a method for the solution of the respective numerical task, i.e., one or a set of linear or nonlinear integral equations, is described. This method includes a coupling algorithm with a surface chemistry model and resolves the singularity problem of the integral equations. Third, the fluxes inside trenches and holes are compared. The flux from reemission is the major portion of the local flux at the bottom of both types of structure. The framework is applied in SiO{sub 2} etching by fluorocarbon plasmas to predict the increased intensity of reactive ion etching lag in SiO{sub 2} holes compared to trenches. It is also applied in deep Si etching: By calculating the flux of F atoms at the bottom of very high aspect ratio (up to 150) Si trenches and holes during the gas chopping process, the aspect ratio at which the flux of F atoms is eliminated and etching practically stops is estimated.« less
Room temperature deposition of gold onto the diffuse and sharp diffraction spot Si(111)-( 3 × 3) R30° Au surfaces

NASA Astrophysics Data System (ADS)

Plass, Richard; Marks, Laurence D.

1996-06-01

Room temperature gold depositions onto Si(111)-( 3 × 3) R30° Au surfaces with diffuse and sharp diffraction spots [Surf. Sci. 242 (1991) 73] (diffuse and sharp 3 × 3 Au hereafter) under UHV conditions has been monitored using transmission electron diffraction (TED). Both systems display an increase in surface structure diffraction spot intensities up to the completion of 1.0 monolayer (ML) after which the surface beams display an exponential decrease in intensity with coverage. The exponential decay rate decreases after roughly 1.33 ML. These results can be attributed to gold initially diffusing to and filling 3 × 3 Au gold trimer sites in vacancy type surface domain walls [Surf. Sci. 342 (1995) 233], then filling one of three possible sites on the 3 × 3 Au structure with essentially no surface diffusion, disrupting nearby gold trimers. Gold deposition onto the diffuse type structure caused the formation and expansion of satellite arcs around the strongest 3 × 3 beams similar to those seen by others [Surf. Sci. 242 (1991) 73; Jpn. J. Appl. Phys. 16 (1977) 891; J. Vac. Sci. Technol. A 10 (1992) 3486] at elevated temperatures while the sharp structure displayed only a modest shoulder formation near the strongest 3 × 3 beams.
COLLABORATIVE RESEARCH AND DEVELOPMENT (CR&D) Delivery Order 0063: Flexible and Transparent Electronics (FAT) Development

DTIC Science & Technology

2008-02-01

Suzuki, T . Matsushita, T . Aoki and M. Okuda, Thin Solid Films, 445, p263 (2003). 7 S.M. Park, T . Ikegami , K. Ebihara and P.K. Shin, App. Surf...quality films and substrates have negligible scatter therefore we may take the absorption to be 1- T -R, where T and R are the specularly resolved...1995. 2 T . Minami, Semicond. Sci. Technol. 20, S35–S44 (2005). 3 G. Fang, D. Li and B.L. Yao, Vacuum 68, p363 (2003). 4 T . Minami, S. Suzuki and T
Microfluidic Experiments Studying Pore Scale Interactions of Microbes and Geochemistry

NASA Astrophysics Data System (ADS)

Chen, M.; Kocar, B. D.

2016-12-01

Understanding how physical phenomena, chemical reactions, and microbial behavior interact at the pore-scale is crucial to understanding larger scale trends in groundwater chemistry. Recent studies illustrate the utility of microfluidic devices for illuminating pore-scale physical-biogeochemical processes and their control(s) on the cycling of iron, uranium, and other important elements 1-3. These experimental systems are ideal for examining geochemical reactions mediated by microbes, which include processes governed by complex biological phenomenon (e.g. biofilm formation, etc.)4. We present results of microfluidic experiments using a model metal reducing bacteria and varying pore geometries, exploring the limitations of the microorganisms' ability to access tight pore spaces, and examining coupled biogeochemical-physical controls on the cycling of redox sensitive metals. Experimental results will provide an enhanced understanding of coupled physical-biogeochemical processes transpiring at the pore-scale, and will constrain and compliment continuum models used to predict and describe the subsurface cycling of redox-sensitive elements5. 1. Vrionis, H. A. et al. Microbiological and geochemical heterogeneity in an in situ uranium bioremediation field site. Appl. Environ. Microbiol. 71, 6308-6318 (2005). 2. Pearce, C. I. et al. Pore-scale characterization of biogeochemical controls on iron and uranium speciation under flow conditions. Environ. Sci. Technol. 46, 7992-8000 (2012). 3. Zhang, C., Liu, C. & Shi, Z. Micromodel investigation of transport effect on the kinetics of reductive dissolution of hematite. Environ. Sci. Technol. 47, 4131-4139 (2013). 4. Ginn, T. R. et al. Processes in microbial transport in the natural subsurface. Adv. Water Resour. 25, 1017-1042 (2002). 5. Scheibe, T. D. et al. Coupling a genome-scale metabolic model with a reactive transport model to describe in situ uranium bioremediation. Microb. Biotechnol. 2, 274-286 (2009).
Variation of thermophysical parameters of PCM CaCl2.6H2O with dopant from T-history data analysis

NASA Astrophysics Data System (ADS)

Sutjahja, I. M.; Silalahi, Alfriska O.; Sukmawati, Nissa; Kurnia, D.; Wonorahardjo, S.

2018-03-01

T-history is a powerful method for deriving the thermophysical parameters of a phase change material (PCM), which consists of solid and liquid specific heats as well as latent heat enthalpy. The performance of a PCM for thermal energy storage could be altered by chemical dopants added directly to the PCM in order to form a stable suspension. We described in this paper the role of chemical dopants in the variation of thermophysical parameters for CaCl2 · 6H2O inorganic PCM with 1 wt% and 2 wt% dopant concentration and BaSO4 (1 wt%) as a nucleator using the T-history method. The dopant consists graphite and CuO nanoparticles. The data analysis follows the original method proposed by (Zhang et al 1999 Meas. Sci. Technol. 10 201–205) and its modification by (Hong et al 2004 Int. J. Refrig. 27 360–366). In addition, the enthalpy-temperature curve is obtained by adopting a method proposed by (Marín et al 2003 Meas. Sci. Technol. 14 184–189). We found that the solid specific heat tends to increase non-linearly with increased dopant concentration for all dopants. The increased liquid specific heat, however, indicates the optimum value for 1 wt% graphite dopant. In contrast, the CuO dopant shows a smaller increase in dopant concentration. The specific heat data are analyzed based on the interacting mesolayer model for a nanofluid. The heat of fusion show strong variation with dopant type, in agreement with other experimental data for various PCMs and dopant particles.
Quantifying the decadal changes of PM2.5 over New York through a combination of satellite, model and in-situ measurements

NASA Astrophysics Data System (ADS)

Jin, X.; Fiore, A. M.; Curci, G.; Lyapustin, A.; Wang, Y.; Civerolo, K.; Ku, M.; van Donkelaar, A.; Martin, R.

2017-12-01

Ambient exposure to fine particulate matter (PM2.5) is one of the top global health concerns. Efforts have been made to regulate PM2.5 precursor emissions across the U.S.A, which are expected to mitigate the air pollution related health impacts. However, quantifying the health outcomes from emission controls requires robust estimates of PM2.5 exposures that accurately describe the spatial and temporal variability of PM2.5. Satellite remote sensing offers the potential to fill the gaps of the sparse, limited sampling of in situ measurement networks and is increasingly being used in health assessments. We provide new estimates of PM2.5 over New York State with 1 km spatial resolution that use Multi-Angle Implementation of Atmospheric Correction (MAIAC) AOD and a regional air quality model (CMAQ) to estimate the AOD-PM2.5 scaling factors. Next, we evaluate three major sources of uncertainties of satellite-derived PM2.5 data and their impacts on the derived decadal changes: 1) satellite retrieval of AOD, 2) optical properties of the particles, 3) relationships between the aerosol burden in the planetary boundary layer and full atmospheric column. Finally, we analyze the decadal changes of PM2.5 over New York State using the newly developed PM2.5 data, alongside four other PM2.5 estimates including satellite-derived PM2.5 developed by van Donkelaar et al. (2015), statistical land use regression developed by Beckerman et al. (2013), CMAQ simulations, and a Bayesian fusion of CMAQ and ground-based measurements. By evaluating the decadal changes of PM2.5 from multiple datasets over areas with dense (e.g. New York City area) and sparse ground-based measurements (e.g. upstate New York), we evaluate the extent to which satellite remote sensing could help better quantify the health outcomes of emission controls. References: Beckerman et al., (2013), A Hybrid Approach to Estimating National Scale Spatiotemporal Variability of PM2.5 in the Contiguous United States, Environ. Sci. Technol., 47(13), 7233-7241. van Donkelaar et al. (2015), High-Resolution Satellite-Derived PM2.5 from Optimal Estimation and Geographically Weighted Regression over North America, Environ. Sci. Technol., 49(17), 10482-10491.
[Analysis on literatures about clinical treatment of low back pain with acupuncture and moxibustion published in the periodicals included by SCI in recent 5 years].

PubMed

Jiang, Chui-gang

2007-03-01

To explore the development state of acupuncture and moxibustion therapy in the world. Retrieve and analyze the literatures about clinically treating low back pain with acupuncture and moxibustion published at periodicals included by SCI in recent 5 years in Pubmed. Nineteen concerned literatures were retrieved. Authors of the literatures come from USA, Germany, Hong Kong of China, UK (including Northern Ireland) , Austria, Sweden and Italy. The literatures were published at Altern Ther Health Med, Am J Phys Med Rehabil, Anesth Analg, Arch Intern Med, Forsch Komplementärmed Klass Naturheilkd, Health Technol Assess, Rheumatology (Oxford), South Med J, Spine, Complment Ther Med, Pain. Three researches show that efficacy of acupuncture is uncertain. Other researches support the efficacy of acupuncture. The researches on treating low back pain with acupuncture and moxibustion are still mainly about efficacy of the acupuncture and moxibustion therapy. The acupuncture and moxibustion therapy is still in the process of gradually admitted by international medicine.
Studies of Turbulence and Transport in Alcator C-Mod H-Mode Plasmas with Phase Contrast Imaging and Comparisons with GYRO

NASA Astrophysics Data System (ADS)

Porkolab, M.; Lin, L.; Edlund, E. M.; Rost, J. C.; Fiore, C. L.; Greenwald, M.; Mikkelsen, D.

2008-11-01

We present recent experimental measurements of turbulence and transport in C-Mod H-Mode plasmas with and without internal transport barriers (ITB) using the phase contrast imaging (PCI) diagnostic and compare the results with GYRO predictions. In plasmas without ITB, the fluctuation above 300 kHz observed by PCI agrees with ITG in GYRO simulation, including the direction of propagation, wavenumber spectrum, and absolute intensity within experimental uncertainly (+/-75%). After transition to ITBs, the observed overall fluctuation intensity increases. GYRO simulation in the core shows that ITG dominates in ITBs but its intensity is lower than the overall experimental measurements which may also include contributions from the plasma edge. These results, as well as the impact of varying ∇Ti, ∇n, and ExB shear on turbulence will be discussed. C.L. Fiore et al., Fusion Sci. Technol., 51, 303 (2007). M. Porkolab et al., IEEE Trans. Plasma Sci. 34, 229 (2006). J. Candy et al., Phys. Rev. Lett., 91, 045001 (2003).

Flux Pinning Enhancement in YBa2Cu3O7-x Films with BaSnO3 Nanoparticles

DTIC Science & Technology

2008-10-01

SUPERCONDUCTOR SCIENCE AND TECHNOLOGY Supercond. Sci. Technol. 19 (2006) L37 –L41 doi:10.1088/0953-2048/19/10/L01 RAPID COMMUNICATION Flux pinning enhancement in...2006 Online at stacks.iop.org/SUST/19/ L37 Abstract Nanoparticles of BaSnO3 were incorporated into YBa2Cu3O7−x (YBCO) films on LaAlO3 substrates for...0953-2048/06/100037+05$30.00 © 2006 IOP Publishing Ltd Printed in the UK L37 1 Rapid Communication materials and sintered together to form a composite
Manufacturable Tri-Stack AlSb/InAs HEMT Low-Noise Amplifiers Using Wafer-Level-Packaging Technology for Light-Weight and Ultralow-Power Applications

DTIC Science & Technology

2009-05-01

shown in Fig. 1 was grown by molecular - beam epitaxy (MBE) on 3-inch semi-insulating GaAs substrates. AlGaSb was used as a buffer. AlSb was used as... beam epitaxy for low-power applications,” J. Vac. Sci. Technol. B. 24, pp. 2581-2585, 2006. [12] Y. C. Chou, L. J. Lee, J. M. Yang, M. D. Lange, P...passivation AlGaSb buffer Figure 1: Cross section of an AlSb/InAs HEMT device on a 3-inch GaAs substrate. The interface region between the
Temperature Dependent Spectral Response and Detectivity of GeSn Photoconductors on Silicon for Short Wave Infrared Detection

DTIC Science & Technology

2014-01-01

Littler, M. Canonico, S. Zollner, J. Kouvetakis, and J. Menéndez, "Optical critical points of thin- film Ge1−ySny alloys : A comparative Ge1−ySny∕Ge1...Bernardy, T. Stoica, D. Grützmacher, and S. Mantl, "Reduced Pressure CVD Growth of Ge and Ge1−xSnx Alloys ," ECS J. of Solid State Sci. and Technol. 2... oxide etch, 10 nm of Cr followed by 200 nm of Au was deposited for the Ohmic contacts. These contacts showed a linear I-V behavior, thus no
Recent Experimental Advances to Determine (noble) Gases in Waters

NASA Astrophysics Data System (ADS)

Kipfer, R.; Brennwald, M. S.; Huxol, S.; Mächler, L.; Maden, C.; Vogel, N.; Tomonaga, Y.

2013-12-01

In aquatic systems noble gases, radon, and bio-geochemically conservative transient trace gases (SF6, CFCs) are frequently applied to determine water residence times and to reconstruct past environmental and climatic conditions. Recent experimental breakthroughs now enable ● to apply the well-established concepts of terrestrial noble gas geochemistry in waters to the minute water amounts stored in sediment pore space and in fluid inclusions (A), ● to determine gas exchange processes on the bio-geochemical relevant time scales of minutes - hours (B), and ● to separate diffusive and advective gas transport in soil air (C). A. Noble-gas analysis in water samples (< 1 g) facilitates determining the solute transport in the pore space and identifying the origin of bio- and geogenic fluids in (un) consolidated sediments [1]. Advanced techniques that combine crushing and sieving speleothem samples in ultra-high-vacuum to a specific grain size allow to separate air and water-bearing fluid inclusions and thus enables noble-gas-based reconstruction of environmental conditions from water masses as small as 1mg [2]. B. The coupling of noble gas analysis with approaches of gas chromatography permits combined analysis of noble gases and other gases species (e.g., SF6, CFCs, O2, N2) from a single water sample. The new method substantially improves ground water dating by SF6 and CFCs as excess air is quantified from the same sample and hence can adequately be corrected for [3]. Portable membrane-inlet mass spectrometers enable the quasi-continuous and real-time analysis of noble gases and other dissolved gases directly in the field, allowing, for instance, quantification of O2 turnover rates on small time scales [4]. C. New technical developments perfect 222Rn analysis in water by the synchronous the determination of the short-lived 220Rn. The combined 220,222Rn analysis sheds light on the emanation behaviour of radon by identifying soil water content to be the crucial control of 220Rn occurrence in the environment, e.g., making an argument why 220Rn is not detectable in water, but in soil air. As 220Rn occurrence is of 'very local origin' the combined analysis of 220,222Rn in soil air allows differentiating between advective and diffusive soil gas transport [5]. By discussing these recent achievements, we intend to stimulate a broader discussion to identify future applications of noble and other gases in (un) conventional aquatic systems, such as blood. [1] Tomonaga et al. (2011) Limnol. Oceanogr. Methods, 9, 42-49, doi:10:4319/lom.2011.9.42. [2] Vogel et al. (2013) Geochem. Geophys. Geosyst., 14, doi:10.1002/ggge.20164. [3] Brennwald et al. (2013) Environ. Sci. Technol., Article ASAP, DOI: 10.1021/es401698p. [4] Mächler et al. (2012) Environ. Sci. Technol., 47, 7060-7066. [5] Huxol et al. Environ. Sci. Technol., in revision.
3D-calibration of three- and four-sensor hot-film probes based on collocated sonic using neural networks

NASA Astrophysics Data System (ADS)

Kit, Eliezer; Liberzon, Dan

2016-09-01

High resolution measurements of turbulence in the atmospheric boundary layer (ABL) are critical to the understanding of physical processes and parameterization of important quantities, such as the turbulent kinetic energy dissipation. Low spatio-temporal resolution of standard atmospheric instruments, sonic anemometers and LIDARs, limits their suitability for fine-scale measurements of ABL. The use of miniature hot-films is an alternative technique, although such probes require frequent calibration, which is logistically untenable in field setups. Accurate and truthful calibration is crucial for the multi-hot-films applications in atmospheric studies, because the ability to conduct calibration in situ ultimately determines the turbulence measurements quality. Kit et al (2010 J. Atmos. Ocean. Technol. 27 23-41) described a novel methodology for calibration of hot-film probes using a collocated sonic anemometer combined with a neural network (NN) approach. An important step in the algorithm is the generation of a calibration set for NN training by an appropriate low-pass filtering of the high resolution voltages, measured by the hot-film-sensors and low resolution velocities acquired by the sonic. In Kit et al (2010 J. Atmos. Ocean. Technol. 27 23-41), Kit and Grits (2011 J. Atmos. Ocean. Technol. 28 104-10) and Vitkin et al (2014 Meas. Sci. Technol. 25 75801), the authors reported on successful use of this approach for in situ calibration, but also on the method’s limitations and restricted range of applicability. In their earlier work, a jet facility and a probe, comprised of two orthogonal x-hot-films, were used for calibration and for full dataset generation. In the current work, a comprehensive laboratory study of 3D-calibration of two multi-hot-film probes (triple- and four-sensor) using a grid flow was conducted. The probes were embedded in a collocated sonic, and their relative pitch and yaw orientation to the mean flow was changed by means of motorized traverses. The study demonstrated that NN-calibration is a powerful tool for calibration of multi-sensor 3D-hot film probes embedded in a collocated sonic, and can be employed in long-lasting field campaigns.
EDITORIAL: Outgoing Editor-in-Chief Outgoing Editor-in-Chief

NASA Astrophysics Data System (ADS)

Hauptmann, Peter

2012-01-01

I started in 2002 as Editor-in-Chief of a well established journal—MST (Measurement Science and Technology). It was a time when modern means of communication offered new opportunities for the scientific community—for all scientists and engineers whether at universities, in industry or at other institutions—to access better quality information in a shorter time. This development helped us to be more efficient in our daily scientific work and to anticipate new trends faster than before. A flood of information was created by different search engines. A few online journals or journals published in emerging countries with a similar profile to MST appeared on the market. MST had to provide new answers in response to these developments. In 2002 I postulated two requirements to the journal. Firstly, the publisher has to be up to date. My impression over the years has been that IOPP is excellently organized. That has made it easier for the board members and all our reviewers to concentrate on the scientific aspects of our input to the journal. During all my visits to Bristol or my contacts with the IOPP staff I always met very professional and enthusiastic staff members. They have not only supported and encouraged the ideas and initiatives of the Editorial Board members, but they have also worked hard on establishing one of the most effective journal operations in the field of measurement science and technology. Many authors are well aware of this. Thus I am able to declare that the first requirement for a successful journal has been met. Secondly, the scientific level has to be high and the journal should attract readers from all over the world. This task was the responsibility of the Editorial Board members and of myself. Our strategy was on the one hand to ensure continuity in MST but on the other hand to be open to new trends and developments. Examples of these new aspects of the journal are fields like micro- and nanometrology, measurement techniques for biological, medical and life science applications or sensors and sensing systems. Selected papers or special features in recent issues of MST attest to this development [1-3]. In parallel with these new fields, board members have always kept their eye on the other journal topics. Many papers published in MST have been downloaded very often and highly cited. This shows the acceptance and reputation of MST. Thanks to the activity of all board members over the last ten years MST has published a number of excellent review articles. This has strengthened the prestige of MST. A new series of articles was introduced under the banner of 'Perspectives' in 2008. They highlight milestones in a selected field and indicate some future challenges from the point of view of the author [4]. In summary, it can be stated that MST is on a good path. This was created thanks to the activity of all members of the Editorial Board. In recent years we have enlarged this board with well known scientists from universities and industry from all over the world. This will ensure a continuously positive development of MST. As outgoing Editor-in-Chief, I can say that I have found my task fascinating and I have enjoyed it very much. I have learned a lot in this time because I have come into close contact with a large number of scientists from a vast spectrum of technical areas and parts of our world. My special gratitude is dedicated to all the Editorial Board members of the last ten years and especially to Sharon D'Souza from IOPP. Furthermore, I would like to pass on to my successor, Professor David Birch from University of Strathclyde, Glasgow, my best wishes for an enjoyable and successful tenure as Editor-in-Chief! References [1] Tanaka M, Baba T and Postek M T 2011 Nanometrology Meas. Sci. Technol. 22 020101 [2] Potyrailo R A et al 2011 RFID sensors as the common sensing platform for single-use biopharmaceutical manufacturing Meas. Sci. Technol. 22 082001 [3] Fritze H 2011 High-temperature bulk acoustic wave sensors Meas. Sci. Technol. 22 012002 [4] Birch D J S 2011 Fluorescence detections and directions Meas. Sci. Technol. 22 052002
A status report of the multipurpose superconducting electron cyclotron resonance ion source.

PubMed

Ciavola, G; Gammino, S; Barbarino, S; Celona, L; Consoli, F; Gallo, G; Maimone, F; Mascali, D; Passarello, S; Galatà, A; Tinschert, K; Spaedtke, P; Lang, R; Maeder, J; Rossbach, J; Koivisto, H; Savonen, M; Koponen, T; Suominen, P; Ropponen, T; Baruè, C; Lechartier, M; Beijers, J P M; Brandenburg, S; Kremers, H R; Vanrooyen, D; Kuchler, D; Scrivens, R; Schachter, L; Dobrescu, S; Stiebing, K

2008-02-01

Intense heavy ion beam production with electron cyclotron resonance (ECR) ion sources is a common requirement for many of the accelerators under construction in Europe and elsewhere. An average increase of about one order of magnitude per decade in the performance of ECR ion sources was obtained up to now since the time of pioneering experiment of R. Geller at CEA, Grenoble, and this trend is not deemed to get the saturation at least in the next decade, according to the increased availability of powerful magnets and microwave generators. Electron density above 10(13) cm(-3) and very high current of multiply charged ions are expected with the use of 28 GHz microwave heating and of an adequate plasma trap, with a B-minimum shape, according to the high B mode concept [S. Gammino and G. Ciavola, Plasma Sources Sci. Technol. 5, 19 (1996)]. The MS-ECRIS ion source has been designed following this concept and its construction is underway at GSI, Darmstadt. The project is the result of the cooperation of nine European institutions with the partial funding of EU through the sixth Framework Programme. The contribution of different institutions has permitted to build in 2006-2007 each component at high level of expertise. The description of the major components will be given in the following with a view on the planning of the assembly and commissioning phase to be carried out in fall 2007. An outline of the experiments to be done with the MS-ECRIS source in the next two years will be presented.
Determination of the composition of HgCdTe oxide films by neutron activation analysis

NASA Astrophysics Data System (ADS)

Gnade, B.; Simmons, A.; Little, D.; Strong, R.

1987-04-01

The composition of HgCdTe oxides grown by anodic oxidation in a standard KOH/ethylene glycol solution has been determined by neutron activation analysis (NAA). This technique is not hindered by the difficulties normally associated with methods using ion beams or electron beams. Neutron activation analysis has the advantage of being quantitative, and also NAA is not affected by the chemical composition of the matrix. The analysis of the KOH/ethylene glycol oxide film by neutron activation yields Hg:Cd:Te ratios of 0.534:0.19:1, in close agreement with Rutherford backscattering spectroscopy analysis (R.L. Strong et al., J. Vac. Sci. Technol. A4 (4) (1986) 1992).
Measurements and modeling of the impact of weak magnetic fields on the plasma properties of a planar slot antenna driven plasma source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoshikawa, Jun, E-mail: jun.yoshikawa@tel.com; Susa, Yoshio; Ventzek, Peter L. G.

The radial line slot antenna plasma source is a type of surface wave plasma source driven by a planar slot antenna. Microwave power is transmitted through a slot antenna structure and dielectric window to a plasma characterized by a generation zone adjacent to the window and a diffusion zone that contacts a substrate. The diffusion zone is characterized by a very low electron temperature. This renders the source useful for soft etch applications and thin film deposition processes requiring low ion energy. Another property of the diffusion zone is that the plasma density tends to decrease from the axis tomore » the walls under the action of ambipolar diffusion at distances far from where the plasma is generated. A previous simulation study [Yoshikawa and. Ventzek, J. Vac. Sci. Technol. A 31, 031306 (2013)] predicted that the anisotropy in transport parameters due to weak static magnetic fields less than 50 G could be leveraged to manipulate the plasma profile in the radial direction. These simulations motivated experimental tests in which weak magnetic fields were applied to a radial line slot antenna source. Plasma absorption probe measurements of electron density and etch rate showed that the magnetic fields remote from the wafer were able to manipulate both parameters. A summary of these results is presented in this paper. Argon plasma simulation trends are compared with experimental plasma and etch rate measurements. A test of the impact of magnetic fields on charge up damage showed no perceptible negative effect.« less
Reactive Gaseous Mercury Formation Over The North Pacific Ocean: Influence Of Environmental Parameters On Elemental Mercury Oxidation In The Marine Boundary Layer

NASA Astrophysics Data System (ADS)

Laurier, F. J.

2002-12-01

Global mercury models have identified wet and dry particle deposition and evasion of dissolved gaseous mercury from the ocean and from land as key controls over global mercury cycling (1,2). Recent ocean studies (3,4) however, have indicated that estimated mercury evasion rates from the ocean substantially exceed estimated deposition. Oxidized reactive gaseous mercury species (RGHg) are now known to play a major role in the global mercury cycle (2,5). RGHg species are water-soluble, exhibit a much shorter atmospheric lifetime than elemental mercury, and contribute to a large extent to atmospheric mercury deposition (2,3,6). Although recent global mercury models have accounted for the dry deposition of RGHg derived from point source emissions (6,7), the formation and deposition of RGHg in remote areas have not been incorporated. We suggest that the oxidation of elemental mercury over the ocean, by gas phase or heterogeneous reactions, is an important part the global mercury cycle. In agreement with previous studies (3,8,9) our recent data from atmospheric collections over the North Pacific Ocean support the notion of enhanced oxidation in the marine boundary layer. Our results show an inverse correlation between RGHg production and ozone, and a diurnal cycle with highest concentrations during periods of highest UV irradiation. In addition, the relationship between RGHg and other parameters measured during the cruise will be discussed. Our results clearly show that RGHg deposition to the ocean must be an important Hg source, and a crucial part of the global Hg cycle. (1) Mason R.P., Fitzgerald W.F., and Morel F.M.M. (1994), The biogeochemical cycling of elemental mercury: Anthropogenic influences, Geochim. Cosmochim. Acta, 58: 3191-3198 (2) Shia R.L., Seigneur C., Pai P., Ko M., and Sze N.-D. (1999), Global simulation of atmospheric mercury concentrations and deposition fluxes, J. Geophy. Res., 104(D19), 23, 747-23, 760 (3) Mason, R.P., Lawson N.M., and Sheu G.-R. (2001), Mercury in the Atlantic Ocean: factors controlling air-sea exchange of mercury and its distribution in the upper water, Deep-Sea Res. II, 2829-2853 (4) Lamborg, C.H., Rolfus K.R., and Fitzgerald W.F. (1999), The atmospheric cycling and air-sea exchange of mercury species in the south and equatorial Atlantic Ocean, Deep-Sea Res. II, 957-977 (5) Lindberg S.E., Brooks S., Lin C.-J., Scott K. J., Landis M. S., Stevens R.K., Goodsite M., and Richter A. (2002), Dynamic oxidation of gaseous mercury in the arctic troposphere at polar sunrise, Environ. Sci. Technol., 1245-1256 (6) Bullock O.R. (2000), Modeling assessment of transport and deposition patterns of anthropogenic mercury air emissions in the United States and Canada, Sci Total Environ., 259(1-3), 145-157 (7) Xu X., Yang X., Miller d.R., Helble J.J., and Carley R.J. (2000), a regional scale modelling study of atmospheric transport and formation of mercury. II. Simulation results for the northeast United states, Atmos. Environ., 34: 4945-4955 (8) Sheu G.-R. (2001), Speciation and distribution of atmospheric mercury: Significance of reactive gaseous mercury in the global mercury cycle. PhD. thesis, University of Maryland, College park, pp. 170 (9) Guentzel J.L., Landing W.M., Gill G.A., and Pollman C.D. (2001), Processes influencing rainfall deposition of mercury in Florida, Environ. Sci. Technol., 35: 863-873
Integration of snow management practices into a detailed snow pack model

NASA Astrophysics Data System (ADS)

Spandre, Pierre; Morin, Samuel; Lafaysse, Matthieu; Lejeune, Yves; François, Hugues; George-Marcelpoil, Emmanuelle

2016-04-01

The management of snow on ski slopes is a key socio-economic and environmental issue in mountain regions. Indeed the winter sports industry has become a very competitive global market although this economy remains particularly sensitive to weather and snow conditions. The understanding and implementation of snow management in detailed snowpack models is a major step towards a more realistic assessment of the evolution of snow conditions in ski resorts concerning past, present and future climate conditions. Here we describe in a detailed manner the integration of snow management processes (grooming, snowmaking) into the snowpack model Crocus (Spandre et al., Cold Reg. Sci. Technol., in press). The effect of the tiller is explicitly taken into account and its effects on snow properties (density, snow microstructure) are simulated in addition to the compaction induced by the weight of the grooming machine. The production of snow in Crocus is carried out with respect to specific rules and current meteorological conditions. Model configurations and results are described in detail through sensitivity tests of the model of all parameters related to snow management processes. In-situ observations were carried out in four resorts in the French Alps during the 2014-2015 winter season considering for each resort natural, groomed only and groomed plus snowmaking conditions. The model provides realistic simulations of the snowpack properties with respect to these observations. The main uncertainty pertains to the efficiency of the snowmaking process. The observed ratio between the mass of machine-made snow on ski slopes and the water mass used for production was found to be lower than was expected from the literature, in every resort. The model now referred to as "Crocus-Resort" has been proven to provide realistic simulations of snow conditions on ski slopes and may be used for further investigations. Spandre, P., S. Morin, M. Lafaysse, Y. Lejeune, H. François and E. George-Marcelpoil, Integration of snow management processes into a detailed snowpack model, Cold Reg. Sci. Technol., in press.
Application of common y-intercept regression parameters for log Kp vs 1/ T for predicting gas-particle partitioning in the urban environment

NASA Astrophysics Data System (ADS)

Pankow, James F.

Gas-particle partitioning is examined using a partitioning constant Kp = ( F/ TSP)/ A, where F (ng m -3) and A (ng m -3) are the particulate-associated and gas-phase concentrations, respectively, and TSP is the total suspended particulate matter level (μg m -3). Compound-dependent values of Kp depend on temperature ( T) according to Kp = mp/ T + bp. Limitations in data quality can cause errors in estimates of mp and bp obtained by simple linear regression (SLR). However, within a group of similar compounds, the bp values will be similar. By pooling data, an improved set of mp and a single bp can be obtained by common y-intercept regression (CYIR). SLR estimates for mp and bp for polycyclic aromatic hydrocarbons (PAHs) sorbing to urban Osaka particulate matter are available (Yamasaki et al., 1982, Envir. Sci. Technol.16, 189-194), as are CYIR estimates for the same particulate matter (Pankow, 1991, Atmospheric Environment25A, 2229-2239). In this work, a comparison was conducted of the ability of these two sets of mp and bp to predict A/ F ratios for PAHs based on measured T and TSP values for data obtained in other urban locations, specifically: (1) in and near the Baltimore Harbor Tunnel by Benner (1988, Ph.D thesis, University of Maryland) and Benner et al. (1989, Envir. Sci. Technol.23, 1269-1278); and (2) in Chicago by Cotham (1990, Ph.D. thesis, University of South Carolina). In general, the CYIR estimates for mp and bp obtained for Osaka particulate matter were found to be at least as reliable, and for some compounds more reliable than their SLR counterparts in predicting gas-particle ratios for PAHs. This result provides further evidence of the utility of the CYIR approach in quantitating the dependence of log Kp values on 1/ T.
EDITORIAL: Letter from the Editor Letter from the Editor

NASA Astrophysics Data System (ADS)

Hauptmann, Peter

2011-01-01

Dear authors and reviewers of articles for Measurement Science and Technology, I would like to thank all those who have published papers with us in 2010, and special thanks go to those of you who have kindly reviewed articles for the journal. I would also like to take this opportunity to update you on some of the developments on the journal and look ahead to 2011. As many of you are no doubt aware, our impact factor (a measure of the average number of times recent papers are referred to by others) is currently 1.317. This is often taken as an indication of the quality and relevance of recently published research, and although as readers we develop our own instinct for journals of high quality, it is gratifying as an Editor to see the data from an independent organization (Thomson ISI) agreeing with my own assessment. Measurement Science and Technology is a journal with a broad scope covering new measurement techniques in all fields of science and engineering. I therefore find it particularly enjoyable to read summaries of recent research in our strong topical review programme as these cover many varied topics of interest. In 2010 several interesting articles by international leaders in their field were published, for example: Single-photon generation and detection, by G S Buller and R J Collins of Heriot-Watt University [1]. Fluorescence lifetime imaging microscopy in life sciences, by Jan Willem Borst and Antonie J W G Visser, from the Microspectroscopy Centre of Wageningen University [2]. Biological and chemical sensors for cancer diagnosis, by Elfriede Simon of Siemens AG [3]. I hope that these articles, and the others published in 2010 and now in 2011, will provide a useful overview for our readers, and be helpful to new researchers. When speaking to young researchers I am particularly aware that having their articles published in a timely fashion is important, and I am pleased that our publication times are highly competitive, with most authors receiving a publication decision within 7 weeks and most articles being published a month after acceptance. Looking forward to 2011, we will continue to rely on you, our esteemed reviewers, for your help in determining which articles make a significant contribution to the field of measurements. Your work is highly valued, not only by those of us who work directly on the journal, but also by the readers who can continue to refer to MST knowing that only work of a high standard is published here. There simply remains for me to say thank you again for your contribution to Measurement Science and Technology in 2010, and I wish you all the best for a successful 2011! References [1] Buller G S and Collins R J 2010 Single-photon generation and detection Meas. Sci. Technol. 21 012002 [2] Borst J W and Visser A J W G 2010 Fluorescence lifetime imaging microscopy in life sciences Meas. Sci. Technol. 21 102002 [3] Simon E 2010 Biological and chemical sensors for cancer diagnosis Meas. Sci. Technol. 21 112002
Influence of kinetic effects on the resonance behavior of the Multipole Resonance Probe

NASA Astrophysics Data System (ADS)

Oberrath, Jens; Mussenbrock, Thomas; Brinkmann, Ralf Peter

2012-10-01

Active plasma resonance spectroscopy is a well known diagnostic method. Many concepts of this method are theoretically investigated and realized as a diagnostic tool. One of these tools is the multipole resonance probe (MRP) [1]. The application of such a probe in plasmas with pressures of only a few Pa raises the question whether kinetic effects have to be taken into account or not. To address this question a kinetic model is necessary. A general kinetic model for an electrostatic concept of active plasma resonance spectroscopy has already been presented by the authors [2]. This model can be used to describe the dynamical behavior of the MRP, which is interpretable as a special case of the general model. Neglecting electron-neutral collisions, this model can be solved analytically. Based on this solution we derive an approximated expression for the admittance of the system to investigate the influence of kinetic effects on the resonance behavior of the MRP. [4pt] [1] M. Lapke et al., Plasma Sources Sci. Technol. 20, 2011, 042001[0pt] [2] J. Oberrath et al., Proceedings of the 30th International Conference on Phenomena in Ionized Gases, 28th August - 2nd September, 2011
Fast Fourier transform-based solution of 2D and 3D magnetization problems in type-II superconductivity

NASA Astrophysics Data System (ADS)

Prigozhin, Leonid; Sokolovsky, Vladimir

2018-05-01

We consider the fast Fourier transform (FFT) based numerical method for thin film magnetization problems (Vestgården and Johansen 2012 Supercond. Sci. Technol. 25 104001), compare it with the finite element methods, and evaluate its accuracy. Proposed modifications of this method implementation ensure stable convergence of iterations and enhance its efficiency. A new method, also based on the FFT, is developed for 3D bulk magnetization problems. This method is based on a magnetic field formulation, different from the popular h-formulation of eddy current problems typically employed with the edge finite elements. The method is simple, easy to implement, and can be used with a general current–voltage relation; its efficiency is illustrated by numerical simulations.
Annually-layered lake sediments reveal strongly increased release of persistent chemicals due to accelerated glacier melting

NASA Astrophysics Data System (ADS)

Anselmetti, Flavio S.; Blüthgen, Nancy; Bogdal, Christian; Schmid, Peter

2010-05-01

Melting glaciers may represent a secondary source of chemical pollutants that have previously been incorporated and stored in the ice. Of particular concern are persistent organic pollutants (POPs), such as the insecticide dichlorodiphenyl trichloroethane (DDT) and industrial chemicals like polychlorinated biphenyls (PCBs), which are hazardous environmental contaminants due to their persistent, bioaccumulative and toxic properties. They were introduced in the 1930s and eventually banned in the 1970s. After release into the environment these chemicals were atmospherically transported to even remote areas such as the Alps and were deposited and stored in glaciers. Ongoing drastic glacier melting due to global warming, which is expected to further accelerate, implies the significance of studying the fate of these 'legacy pollutants'. Proglacial lake sediments provide well-dated and high-resolution archives to reconstruct timing and quantities of such a potentially hazardous remobilization. The goal of this study is to reconstruct the historical inputs of POPs into remote alpine lakes and to investigate the accelerated release of POPs from melting glaciers. Due to their lipophilic character, these chemicals exhibit a high tendency to adsorb to particles whereas concentrations in water are expected to be low. Therefore, quantitative determination in annually-layered lake sediment provides an excellent way to investigate the temporal trend of inputs into lakes that act as particle sinks. For this purpose, sediment cores were sampled from proglacial lakes in the Bernese Alps (Switzerland), which are exclusively fed by glacial melt waters. For comparison, cores were also taken from nearby high-alpine lakes located in non-glaciated catchments, which only should record the initial atmospheric fall-out. Sediment layers were dated by annual varve counting and radionuclide measurements; they cover the time period from the mid 20th century to today. The measured time series of POPs indicate indeed different patterns in proglacial and non-glacial lakes. Similar to lowland Swiss plateau lakes [1,2], high-alpine lakes show a historic maximum of POP-concentrations some decades ago, which is synchronous with their primary use at that time. However, only proglacial lakes exhibit a dramatic re-increase in POP-input during the last years, thus confirming the crucial role of glaciers as reservoir and secondary source of these pollutants. The burden of pollutants in these sediments due to glacier melting is already in the same range as the earlier accumulations from direct atmospheric fall-out. Furthermore, the undiminished increase of the fluxes of many POPs into the sediment of proglacial lakes does not yet indicate an exhaust of the glacial inventory of these contaminants. Considering ongoing global warming and accelerated massive glacier melting predicted for the future, our study indicates the potential for significant environmental hazards due to pollutants delivered into such remote mountainous areas. [3] [1] Zennegg M. et al., Chemosphere 2007, 67, 1754. [2] Bogdal C. et al., Env. Sci. & Technol. 2008, 47, 6817. [3] Bogdal C. et al., Env. Sci. & Technol. 2009, 43, 8173.
Green engineering education through a U.S. EPA/academia collaboration.

PubMed

Shonnard, David R; Allen, David T; Nguyen, Nhan; Austin, Sharon Weil; Hesketh, Robert

2003-12-01

The need to use resources efficiently and reduce environmental impacts of industrial products and processes is becoming increasingly important in engineering design; therefore, green engineering principles are gaining prominence within engineering education. This paper describes a general framework for incorporating green engineering design principles into engineering curricula, with specific examples for chemical engineering. The framework for teaching green engineering discussed in this paper mirrors the 12 Principles of Green Engineering proposed by Anastas and Zimmerman (Environ. Sci. Technol. 2003, 37, 94A-101A), especially in methods for estimating the hazardous nature of chemicals, strategies for pollution prevention, and approaches leading to efficient energy and material utilization. The key elements in green engineering education, which enlarge the "box" for engineering design, are environmental literacy, environmentally conscious design, and beyond-the-plant boundary considerations.
The electron-phonon interaction with forward scattering peak is dominant in high T c superconductors of FeSe films on {{\\rm{SrTiO}}}_{3} (TiO2)

NASA Astrophysics Data System (ADS)

Kulić, M. L.; Dolgov, O. V.

2017-01-01

The theory of the electron-phonon interaction (EPI) with strong forward scattering peak (FSP) in an extreme delta-peak limit (Kulić and Zeyher 1994 Phys. Rev. B 49 4395; Kulić 2000 Phys. Rep. 38 1-264 Kulić and Dolgov 2005 Phys. Status Solidi b 242 151; Danylenko et al 1999 Eur. Phys. J. B 9 201) is recently applied in (Lee et al 2014 Nature 515 245; Rademaker et al 2016 New J. Phys. 18 022001; Wang et al 2016 Supercond. Sci. Technol. 29 054009) for the explanation of high {T}{{c}}(˜ 100 {{K}}) in a monolayer FeSe grown on {{{SrTiO}}}3 (Lee et al 2014 Nature 515 245) and TiO2 (Rebec et al 2016 arXiv:1606.09358v1) substrates. The EPI is due to a long-range dipolar electric field created by high-energy oxygen vibrations ({{Ω }}˜ 90 meV) at the interface (Lee et al 2014 Nature 515 245; Rademaker et al 2016 New J. Phys. 18 022001; Wang et al 2016 Supercond. Sci. Technol. 29 054009). In leading order (with respect to {T}{{c}0}/{{Ω }}) the mean-field critical temperature {T}{{c}0}={< {V}{{epi}}(q)> }q/4) ˜ {({{aq}}{{c}})}2{V}{{epi}}(0) and the gap {{{Δ }}}0=2{T}{{c}0\\text{}} are due to an interplay between the maximal EPI pairing potential {V}{{epi}}(0) and the FSP-width q c. For {T}{{c}0}˜ 100 K one has {{{Δ }}}0˜ 16 meV in a satisfactory agreement with ARPES experiments. In leading order T c0 is mass-independent and a very small oxygen isotope effect is expected in next to leading order. In clean systems T c0 for s-wave and d-wave pairing is degenerate but both are affected by non-magnetic impurities, which are pair-weakening in the s-channel and pair-breaking in the d-channel. The self-energy and replica bands at T = 0 and at the Fermi surface are calculated and compared with experimental results at T> 0 ( Rademaker et al 2016 New J. Phys. 18 022001; Wang et al 2016 Supercond. Sci. Technol. 29 054009). The EPI coupling constant {λ }{{m}}={< {V}{{epi}}(q)> }q/2{{Ω }} is mass-dependent ({M}1/2) and at ω (\\ll {{Ω }}) makes the slope of the self-energy {{Σ }}(k,ω )(≈ -{λ }{{m}}ω ) and the replica intensities {A}i(˜ {λ }{{m}}) mass-dependent. This result, overlooked in the literature, is contrary to the prediction of the standard Migdal-Eliashberg theory for EPI. The small oxygen isotope effect in {T}{{c}0} and pronounced isotope effect in {{Σ }}(k,ω ) and ARPES spectra A i of the replica bands in FeSe films on SrTiO3 and TiO2 is a smoking-gun experiment for validity of the EPI-FSP theory to these systems. The EPI-FSP theory predicts a large number of low-laying pairing states, thus causing internal pair fluctuations. The latter reduce T c0 additionally, by creating a pseudogap state for {T}{{c}}< T< {T}{{c}0}. Possibilities to increase T c0, by designing novel structures are discussed in the framework of the EPI-FSP theory.
Digital particle image thermometry/velocimetry: a review

NASA Astrophysics Data System (ADS)

Dabiri, Dana

2009-02-01

Digital particle image thermometry/velocimetry (DPIT/V) is a relatively new methodology that allows for measurements of simultaneous temperature and velocity within a two-dimensional domain, using thermochromic liquid crystal tracer particles as the temperature and velocity sensors. Extensive research has been carried out over recent years that have allowed the methodology and its implementation to grow and evolve. While there have been several reviews on the topic of liquid crystal thermometry (Moffat in Exp Therm Fluid Sci 3:14-32, 1990; Baughn in Int J Heat Fluid Flow 16:365-375, 1995; Roberts and East in J Spacecr Rockets 33:761-768, 1996; Wozniak et al. in Appl Sci Res 56:145-156, 1996; Behle et al. in Appl Sci Res 56:113-143, 1996; Stasiek in Heat Mass Transf 33:27-39, 1997; Stasiek and Kowalewski in Opto Electron Rev 10:1-10, 2002; Stasiek et al. in Opt Laser Technol 38:243-256, 2006; Smith et al. in Exp Fluids 30:190-201, 2001; Kowalewski et al. in Springer handbook of experimental fluid mechanics, 1st edn. Springer, Berlin, pp 487-561, 2007), the focus of the present review is to provide a relevant discussion of liquid crystals pertinent to DPIT/V. This includes a background on liquid crystals and color theory, a discussion of experimental setup parameters, a description of the methodology’s most recent advances and processing methods affecting temperature measurements, and finally an explanation of its various implementations and applications.
Study of dual radio frequency capacitively coupled plasma: an analytical treatment matched to an experiment

NASA Astrophysics Data System (ADS)

Saikia, P.; Bhuyan, H.; Escalona, M.; Favre, M.; Wyndham, E.; Maze, J.; Schulze, J.

2018-01-01

The behavior of a dual frequency capacitively coupled plasma (2f CCP) driven by 2.26 and 13.56 MHz radio frequency (rf) source is investigated using an approach that integrates a theoretical model and experimental data. The basis of the theoretical analysis is a time dependent dual frequency analytical sheath model that casts the relation between the instantaneous sheath potential and plasma parameters. The parameters used in the model are obtained by operating the 2f CCP experiment (2.26 MHz + 13.56 MHz) in argon at a working pressure of 50 mTorr. Experimentally measured plasma parameters such as the electron density, electron temperature, as well as the rf current density ratios are the inputs of the theoretical model. Subsequently, a convenient analytical solution for the output sheath potential and sheath thickness was derived. A comparison of the present numerical results is done with the results obtained in another 2f CCP experiment conducted by Semmler et al (2007 Plasma Sources Sci. Technol. 16 839). A good quantitative correspondence is obtained. The numerical solution shows the variation of sheath potential with the low and high frequency (HF) rf powers. In the low pressure plasma, the sheath potential is a qualitative measure of DC self-bias which in turn determines the ion energy. Thus, using this analytical model, the measured values of the DC self-bias as a function of low and HF rf powers are explained in detail.

Ligand-controlled Fe mobilization catalyzed by adsorbed Fe(II) on Fe(hydr)oxides

NASA Astrophysics Data System (ADS)

Kang, Kyounglim; Biswakarma, Jagannath; Borowski, Susan C.; Hug, Stephan J.; Hering, Janet G.; Schenkeveld, Walter D. C.; Kraemer, Stephan M.

2017-04-01

Dissolution of Fe(hydr)oxides is a key process in biological iron acquisition. Due to the low solubility of iron oxides in environments with a circumneutral pH, organisms may exude organic compounds catalyzing iron mobilization by reductive and ligand controlled dissolution mechanisms. Recently, we have shown synergistic effects between reductive dissolution and ligand-controlled dissolution that may operate in biological iron acquisition. The synergistic effects were observed in Fe mobilization from single goethite suspensions as well as in suspensions containing calcareous soil[1],[2]. However, how the redox reaction accelerates Fe(hydr)oxide dissolution by ligands is not studied intensively. In our study, we hypothesized that electron transfer to structural Fe(III) labilizes the Fe(hydr)oxide structure, and that this can accelerate ligand controlled dissolution. Systematical batch dissolution experiments were carried out under anoxic conditions at environmentally relevant pH values in which various Fe(hydr)oxides (goethite, hematite, lepidocrocite) interacted with two different types of ligand (desferrioxamine B (DFOB) and N,N'-Di(2-hydroxybenzyl)ethylenediamine-N,N'-diacetic acid monohydrochloride (HBED)). Electron transfer to the structure was induced by adsorbing Fe(II) to the mineral surface at various Fe(II) concentrations. Our results show a distinct catalytic effect of adsorbed Fe(II) on ligand controlled dissolution, even at submicromolar Fe(II) concentrations. We observed the effect for a range of iron oxides, but it was strongest in lepidocrocite, most likely due to anisotropy in conductivity leading to higher near-surface concentration of reduced iron. Our results demonstrate that the catalytic effect of reductive processes on ligand controlled dissolution require a very low degree of reduction making this an efficient process for biological iron acquisition and a potentially important effect in natural iron cycling. References 1. Wang, Z. M.; Schenkeveld, W. D. C.; Kraemer, S. M.; Giammar, D. E. Environ. Sci. Technol. 2015, 49, (12), 7236-7244. 2. Schenkeveld, W. D. C.; Wang, Z. M.; Giammar, D. E.; Kraemer, S. M. Environ. Sci. Technol. 2016, 50, (12), 6381-6388.
Two types of nonlinear wave equations for diffractive beams in bubbly liquids with nonuniform bubble number density.

PubMed

Kanagawa, Tetsuya

2015-05-01

This paper theoretically treats the weakly nonlinear propagation of diffracted sound beams in nonuniform bubbly liquids. The spatial distribution of the number density of the bubbles, initially in a quiescent state, is assumed to be a slowly varying function of the spatial coordinates; the amplitude of variation is assumed to be small compared to the mean number density. A previous derivation method of nonlinear wave equations for plane progressive waves in uniform bubbly liquids [Kanagawa, Yano, Watanabe, and Fujikawa (2010). J. Fluid Sci. Technol. 5(3), 351-369] is extended to handle quasi-plane beams in weakly nonuniform bubbly liquids. The diffraction effect is incorporated by adding a relation that scales the circular sound source diameter to the wavelength into the original set of scaling relations composed of nondimensional physical parameters. A set of basic equations for bubbly flows is composed of the averaged equations of mass and momentum, the Keller equation for bubble wall, and supplementary equations. As a result, two types of evolution equations, a nonlinear Schrödinger equation including dissipation, diffraction, and nonuniform effects for high-frequency short-wavelength case, and a Khokhlov-Zabolotskaya-Kuznetsov equation including dispersion and nonuniform effects for low-frequency long-wavelength case, are derived from the basic set.
Simultaneous electrical and optical study of spoke rotation, merging and splitting in HiPIMS plasma

NASA Astrophysics Data System (ADS)

Klein, P.; Lockwood Estrin, F.; Hnilica, J.; Vašina, P.; Bradley, J. W.

2017-01-01

To gain more information on the temporal and spatial behaviour of self-organized spoke structures in HiPIMS plasmas, a correlation between the broadband optical image of an individual spoke (taken over 200 ns) and the current it delivers to the target has been made for a range of magnetron operating conditions. As a spoke passes over a set of embedded probes in the niobium cathode target, a distinct modulation in the local current density is observed, (typically up to twice the average value), matching very well the radially integrated optical emission intensities (obtained remotely with an ICCD camera). The dual diagnostic system allows the merging and splitting of a set of spokes to be studied as they rotate. It is observed that in the merger of two spokes, the trailing spoke maintains its velocity while the leading spoke either decreases its velocity or increases its azimuthal length. In the spoke splitting process, the total charge collected by an embedded probe is conserved. A simple phenomenological model is developed that relates the spoke mode number m to the spoke dimensions, spoke velocity and gas atom velocity. The results are discussed in the context of the observations of spoke dynamics made by Hecimovic et al (2015 Plasma Sources Sci. Technol. 24 045005)
U(VI) bioreduction with emulsified vegetable oil as the electron donor--model application to a field test.

PubMed

Tang, Guoping; Watson, David B; Wu, Wei-Min; Schadt, Christopher W; Parker, Jack C; Brooks, Scott C

2013-04-02

We amended a shallow fast-flowing uranium (U) contaminated aquifer with emulsified vegetable oil (EVO) and subsequently monitored the biogeochemical responses for over a year. Using a biogeochemical model developed in a companion article (Tang et al., Environ. Sci. Technol.2013, doi: 10.1021/es304641b) based on microcosm tests, we simulated geochemical and microbial dynamics in the field test during and after the 2-h EVO injection. When the lab-determined parameters were applied in the field-scale simulation, the estimated rate coefficient for EVO hydrolysis in the field was about 1 order of magnitude greater than that in the microcosms. Model results suggested that precipitation of long-chain fatty acids, produced from EVO hydrolysis, with Ca in the aquifer created a secondary long-term electron donor source. The model predicted substantial accumulation of denitrifying and sulfate-reducing bacteria, and U(IV) precipitates. The accumulation was greatest near the injection wells and along the lateral boundaries of the treatment zone where electron donors mixed with electron acceptors in the groundwater. While electron acceptors such as sulfate were generally considered to compete with U(VI) for electrons, this work highlighted their role in providing electron acceptors for microorganisms to degrade complex substrates thereby enhancing U(VI) reduction and immobilization.
Self-Organized Composition Modulation During Epitaxial Growth

NASA Astrophysics Data System (ADS)

Barabási

1998-03-01

There is extensive recent experimental evidence of spontaneous superlattice (SL) formation in various II-VI and III-V semiconductors. Here we propose an atomistic mechanism responsible for SL formation, and derive a relation predicting the temperature, flux and miscut dependence of the SL layer thickness(A.-L. Barabási, Appl. Phys. Lett.) 70, 764 (1996).. Moreover, the model explains the existence of a critical miscut angle below which no SL is formed, in agreement with results on ZnSeTe(S.P Ahrenkiel et al.), Phys. Rev. Lett. 75, 1586 (1995)., and predicts the formation of a platelet structure for deposition onto high symmetry surfaces, similar to that observed in InAsSb(A.G. Norman, et al.) Semicond. Sci. Technol. 8, S9 (1991).. Work done in collaboration with I. Daruka and J.K. Furdyna.
Experimental identification of nonlinear coupling between (intermediate, small)-scale microturbulence and an MHD mode in the core of a superconducting tokamak

NASA Astrophysics Data System (ADS)

Sun, P. J.; Li, Y. D.; Ren, Y.; Zhang, X. D.; Wu, G. J.; Xu, L. Q.; Chen, R.; Li, Q.; Zhao, H. L.; Zhang, J. Z.; Shi, T. H.; Wang, Y. M.; Lyu, B.; Hu, L. Q.; Li, J.; The EAST Team

2018-01-01

In this paper, we present clear experimental evidence of core region nonlinear coupling between (intermediate, small)-scale microturbulence and an magnetohydrodynamics (MHD) mode during the current ramp-down phase in a set of L-mode plasma discharges in the experimental advanced superconducting tokamak (EAST, Wan et al (2006 Plasma Sci. Technol. 8 253)). Density fluctuations of broadband microturbulence (k\\perpρi˜2{-}5.2 ) and the MHD mode (toroidal mode number m = -1 , poloidal mode number n = 1 ) are measured simultaneously, using a four-channel tangential CO2 laser collective scattering diagnostic in core plasmas. The nonlinear coupling between the broadband microturbulence and the MHD mode is directly demonstrated by showing a statistically significant bicoherence and modulation of turbulent density fluctuation amplitude by the MHD mode.
A spin-orbit coupling for a neutral particle from Lorentz symmetry breaking effects in the CPT-odd sector of the Standard Model Extension

NASA Astrophysics Data System (ADS)

Belich, H.; Bakke, K.

2015-07-01

We start by investigating the arising of a spin-orbit coupling and a Darwin-type term that stem from Lorentz symmetry breaking effects in the CPT-odd sector of the Standard Model Extension. Then, we establish a possible scenario of the violation of the Lorentz symmetry that gives rise to a linear confining potential and an effective electric field in which determines the spin-orbit coupling for a neutral particle analogous to the Rashba coupling [E. I. Rashba, Sov. Phys. Solid State 2, 1109 (1960)]. Finally, we confine the neutral particle to a quantum dot [W.-C. Tan and J. C. Inkson, Semicond. Sci. Technol. 11, 1635 (1996)] and analyze the influence of the linear confining potential and the spin-orbit coupling on the spectrum of energy.
Turbulent equipartition pinch of toroidal momentum in spherical torus

NASA Astrophysics Data System (ADS)

Hahm, T. S.; Lee, J.; Wang, W. X.; Diamond, P. H.; Choi, G. J.; Na, D. H.; Na, Y. S.; Chung, K. J.; Hwang, Y. S.

2014-12-01

We present a new analytic expression for turbulent equipartition (TEP) pinch of toroidal angular momentum originating from magnetic field inhomogeneity of spherical torus (ST) plasmas. Starting from a conservative modern nonlinear gyrokinetic equation (Hahm et al 1988 Phys. Fluids 31 2670), we derive an expression for pinch to momentum diffusivity ratio without using a usual tokamak approximation of B ∝ 1/R which has been previously employed for TEP momentum pinch derivation in tokamaks (Hahm et al 2007 Phys. Plasmas 14 072302). Our new formula is evaluated for model equilibria of National Spherical Torus eXperiment (NSTX) (Ono et al 2001 Nucl. Fusion 41 1435) and Versatile Experiment Spherical Torus (VEST) (Chung et al 2013 Plasma Sci. Technol. 15 244) plasmas. Our result predicts stronger inward pinch for both cases, as compared to the prediction based on the tokamak formula.
Lead isotopes and trace metal ratios of aerosols as tracers of Pb pollution sources in Kanpur, India

NASA Astrophysics Data System (ADS)

Sen, Indra; Bizimis, Michael; Tripathi, Sachchida; Paul, Debajyoti; Tyagi, Swati; Sengupta, Deep

2015-04-01

The anthropogenic flux of Pb in the Earth's surface is almost an order of magnitude higher than its corresponding natural flux [1]. Identifying the sources and pathways of anthropogenic Pb in environment is important because Pb toxicity is known to have adverse effects on human health. Pb pollution sources for America, Europe, and China are well documented. However, sources of atmospheric Pb are unknown in India, particularly after leaded gasoline was phased out in 2000. India has a developing economy with a rapidly emerging automobile and high temperature industry, and anthropogenic Pb emission is expected to rise in the next decade. In this study, we report on the Pb- isotope compositions and trace metal ratios of airborne particulates collected in Kanpur, an industrial city in northern India. The Pb concentration in the airborne particulate matter varies between 14-216 ng/m3, while the other heavy metals vary by factor of 10 or less, e.g. Cd=0.3-3 ng/m3, As=0.4-3.5 ng/m3, Zn=36-161 ng/m3, and Cu=3-22 ng/m3. The 206Pb/207Pb, 208Pb/206Pb, and 208Pb/207Pb vary between 1.112 - 1.129, 2.123-2.141, and 2.409-2.424 respectively, and are highly correlated with each other (R2>0.9). Pb isotopes and trace metal data reveals that coal combustion is the major source of anthropogenic Pb in the atmosphere, with limited contribution from mining and smelting processes. We further conclude that combination of Pb isotope ratios and V/Pb ratios are powerful tracers for Pb source apportionment studies, which is otherwise difficult to differentiate based only on Pb systematics [1] Sen and Peucker-Ehrenbrink (2012), Environ. Sci. Technol.(46), 8601-8609
Laser irradiance scaling in polar direct drive implosions on the National Ignition Facility

DOE PAGES

Murphy, T. J.; Krasheninnikova, N. S.; Kyrala, G. A.; ...

2015-09-17

Polar-direct-drive experiments conducted at the National Ignition Facility [E. I. Moses, Fusion Sci. Technol. 54, 361 (2008)] performed at laser irradiance between 1 and 2×10 15 W/cm 2 exhibit increased hard x-ray emission, decreased neutron yield, and reduced areal density as the irradiance is increased. Experimental x-ray images at the higher irradiances show x-ray emission at the equator, as well as degraded symmetry, that is not predicted in hydrodynamic simulations using flux-limited energy transport, but that appear when non-local electron transport together with a model to account for cross beam energy transfer (CBET) is utilized. The reduction in laser powermore » for equatorial beams required in the simulations to reproduce the effects of CBET on the observed symmetry also reproduces the yield degradation consistent with experimental data.« less
Damage healing ability of a shape-memory-polymer-based particulate composite with small thermoplastic contents

NASA Astrophysics Data System (ADS)

Nji, Jones; Li, Guoqiang

2012-02-01

The purpose of this study is to investigate the potential of a shape-memory-polymer (SMP)-based particulate composite to heal structural-length scale damage with small thermoplastic additive contents through a close-then-heal (CTH) self-healing scheme that was introduced in a previous study (Li and Uppu 2010 Comput. Sci. Technol. 70 1419-27). The idea is to achieve reasonable healing efficiencies with minimal sacrifice in structural load capacity. By first closing cracks, the gap between two crack surfaces is narrowed and a lesser amount of thermoplastic particles is required to achieve healing. The particulate composite was fabricated by dispersing copolyester thermoplastic particles in a shape memory polymer matrix. It is found that, for small thermoplastic contents of less than 10%, the CTH scheme followed in this study heals structural-length scale damage in the SMP particulate composite to a meaningful extent and with less sacrifice of structural capacity.
Oxygen adsorption and incorporation at irradiated GaN(0001) and GaN(0001¯) surfaces: First-principles density-functional calculations

NASA Astrophysics Data System (ADS)

Sun, Qiang; Selloni, Annabella; Myers, T. H.; Doolittle, W. Alan

2006-11-01

Density functional theory calculations of oxygen adsorption and incorporation at the polar GaN(0001) and GaN(0001¯) surfaces have been carried out to explain the experimentally observed reduced oxygen concentration in GaN samples grown by molecular beam epitaxy in the presence of high energy (˜10keV) electron beam irradiation [Myers , J. Vac. Sci. Technol. B 18, 2295 (2000)]. Using a model in which the effect of the irradiation is to excite electrons from the valence to the conduction band, we find that both the energy cost of incorporating oxygen impurities in deeper layers and the oxygen adatom diffusion barriers are significantly reduced in the presence of the excitation. The latter effect leads to a higher probability for two O adatoms to recombine and desorb, and thus to a reduced oxygen concentration in the irradiated samples, consistent with experimental observations.
RAPID COMMUNICATION: Optical distortion correction for liquid droplet visualization using the ray tracing method: further considerations

NASA Astrophysics Data System (ADS)

Minor, G.; Oshkai, P.; Djilali, N.

2007-11-01

The original work of Kang et al (2004 Meas. Sci. Technol. 15 1104 12) presents a scheme for correcting optical distortion caused by the curved surface of a droplet, and illustrates its application in PIV measurements of the velocity field inside evaporating liquid droplets. In this work we re-derive the correction algorithm and show that several terms in the original algorithm proposed by Kang et al are erroneous. This was not evident in the original work because the erroneous terms are negligible for droplets with approximately hemispherical shapes. However, for the more general situation of droplets that have shapes closer to that of a sphere, with heights much larger than their contact-line radii, these errors become quite significant. The corrected algorithm is presented and its application illustrated in comparison with that of Kang et al.
Exact cone beam reconstruction formulae for functions and their gradients for spherical and flat detectors

NASA Astrophysics Data System (ADS)

Louis, Alfred K.

2016-11-01

We derive unified inversion formulae for the cone beam transform similar to the Radon transform. Reinterpreting Grangeat’s formula we find a relation between the Radon transform of the gradient of the searched-for function and a quantity computable from cone beam data. This gives a uniqueness result for the cone beam transform of compactly supported functions under much weaker assumptions than the Tuy-Kirillov condition. Furthermore this relation leads to an exact formula for the direct calculation of derivatives of the density distribution; but here, similar to the classical Radon transform, complete Radon data are needed, hence the Tuy-Kirillov condition has to be imposed. Numerical experiments reported in Hahn B N et al (2013 Meas. Sci. Technol. 24 125601) indicate that these calculations are less corrupted by beam-hardening noise. Finally, we present flat detector versions for these results, which are mathematically less attractive but important for applications.
A study on the maximum power transfer condition in an inductively coupled plasma using transformer circuit model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Young-Do; Lee, Hyo-Chang; Chung, Chin-Wook

Correlations between the external discharge parameters (the driving frequency ω and the chamber dimension R) and plasma characteristics (the skin depth δ and the electron-neutral collision frequency ν{sub m}) are studied using the transformer circuit model [R. B. Piejak et al., Plasma Sources Sci. Technol. 1, 179 (1992)] when the absorbed power is maximized in an inductively coupled plasma. From the analysis of the transformer circuit model, the maximum power transfer conditions, which depend on the external discharge parameters and the internal plasma characteristics, were obtained. It was found that a maximum power transfer occurs when δ≈0.38R for the dischargemore » condition at which ν{sub m}/ω≪1, while it occurs when δ≈√(2)√(ω/ν{sub m})R for the discharge condition at which ν{sub m}/ω≫1. The results of this circuit analysis are consistent with the stable last inductive mode region of an inductive-to-capacitive mode transition [Lee and Chung, Phys. Plasmas 13, 063510 (2006)], which was theoretically derived from Maxwell's equations. Our results were also in agreement with the experimental results. From this work, we demonstrate that a simple circuit analysis can be applied to explain complex physical phenomena to a certain extent.« less
Development of Microbial and Enzymatic Fuel Cells for Bio-Inspired Power Sources

DTIC Science & Technology

2009-03-01

that of the oxidation of NADH as possible.[30] A variety of organic mediators have been studied for the anode, including phenazines ,[38] dyes,[39,40...glucose-6-phosphate dehydrogenase on the rotating graphite disc electrode modified with phenazine methosulfate. Enzyme Microb. Technol. 1993, 15 (6), 525
Health Information Seeking and Technology Use Among Veterans With Spinal Cord Injuries and Disorders.

PubMed

Hogan, Timothy P; Hill, Jennifer N; Locatelli, Sara M; Weaver, Frances M; Thomas, Florian P; Nazi, Kim M; Goldstein, Barry; Smith, Bridget M

2016-02-01

Access to health information is crucial to persons living with a spinal cord injury or disorder (SCI/D). Although previous research has provided insights on computer and Internet use among persons with SCI/D, as well as how and where persons with SCI/D gather health information, few studies have focused on U.S. veterans with SCI/D. To characterize health information seeking among veterans with SCI/D and to examine the association between technology use and the characteristics of veterans with SCI/D. Cross-sectional. Veterans Health Administration (VHA). Sample of 290 veterans with SCI/D who utilize services at 2 VHA SCI/D Centers. Postal mail survey. Extent of computer, Internet, and text messaging use, information source use, and e-Health literacy rates. The survey response rate was 38%. The majority of respondents were male (97.2%), younger than 65 years (71.0%), and white (71.7%). Of the respondents, 64.8% indicated that they use a computer, 62.9% reported use of the Internet, and 26.2% reported use of text messaging. The mean overall e-Health Literacy Scale score was 27.3 (standard deviation = 7.2). Similar to findings reported in studies focused outside the veteran population, the most frequent source that veterans turned to for information about SCI/D was a health professional (85.1%); this was also the most frequent source that veterans indicated they would turn to first to get information about SCI/D (75.9%). Other frequently reported sources of information included other persons with SCI/D (41.0%), Internet resources (31.0%), and family and friends (27.9%). Fairly high levels of computer and Internet use exist among veterans with SCI/D. Veterans with SCI/D also have a strong preference for people-particularly health professionals, and to a lesser extent peers and family and friends-as sources of information about SCI/D. These findings highlight the importance of combining technology and human interaction to meet the information needs of this population. Published by Elsevier Inc.
Navigating Tensions Between Conceptual and Metaconceptual Goals in the Use of Models

NASA Astrophysics Data System (ADS)

Delgado, Cesar

2015-04-01

Science education involves learning about phenomena at three levels: concrete (facts and generalizations), conceptual (concepts and theories), and metaconceptual (epistemology) (Snir et al. in J Sci Educ Technol 2(2):373-388, 1993). Models are key components in science, can help build conceptual understanding, and may also build metaconceptual understanding. Technology can transform teaching and learning by turning models into interactive simulations that learners can investigate. This paper identifies four characteristics of models and simulations that support conceptual learning but misconstrue models and science at a metaconceptual level. Ahistorical models combine the characteristics of several historical models; they conveniently compile ideas but misrepresent the history of science (Gilbert in Int J Sci Math Educ 2(2):115-130, 2004). Teleological models explain behavior in terms of a final cause; they can lead to useful heuristics but imply purpose in processes driven by chance and probability (Talanquer in Int J Sci Educ 29(7):853-870, 2007). Epistemological overreach occurs when models or simulations imply greater certainty and knowledge about phenomena than warranted; conceptualizing nature as being well known (e.g., having a mathematical structure) poses the danger of conflating model and reality or data and theory. Finally, models are inevitably ontologically impoverished. Real-world deviations and many variables are left out of models, as models' role is to simplify. Models and simulations also lose much of the sensory data present in phenomena. Teachers, designers, and professional development designers and facilitators must thus navigate the tension between conceptual and metaconceptual learning when using models and simulations. For each characteristic, examples are provided, along with recommendations for instruction and design. Prompts for explicit reflective activities around models are provided for each characteristic
Rapid Measurements of Aerosol Size Distribution and Hygroscopic Growth via Image Processing with a Fast Integrated Mobility Spectrometer (FIMS)

NASA Astrophysics Data System (ADS)

Wang, Y.; Pinterich, T.; Spielman, S. R.; Hering, S. V.; Wang, J.

2017-12-01

Aerosol size distribution and hygroscopicity are among key parameters in determining the impact of atmospheric aerosols on global radiation and climate change. In situ submicron aerosol size distribution measurements commonly involve a scanning mobility particle sizer (SMPS). The SMPS scanning time is in the scale of minutes, which is often too slow to capture the variation of aerosol size distribution, such as for aerosols formed via nucleation processes or measurements onboard research aircraft. To solve this problem, a Fast Integrated Mobility Spectrometer (FIMS) based on image processing was developed for rapid measurements of aerosol size distributions from 10 to 500 nm. The FIMS consists of a parallel plate classifier, a condenser, and a CCD detector array. Inside the classifier an electric field separates charged aerosols based on electrical mobilities. Upon exiting the classifier, the aerosols pass through a three stage growth channel (Pinterich et al. 2017; Spielman et al. 2017), where aerosols as small as 7 nm are enlarged to above 1 μm through water or heptanol condensation. Finally, the grown aerosols are illuminated by a laser sheet and imaged onto a CCD array. The images provide both aerosol concentration and position, which directly relate to the aerosol size distribution. By this simultaneous measurement of aerosols with different sizes, the FIMS provides aerosol size spectra nearly 100 times faster than the SMPS. Recent deployment onboard research aircraft demonstrated that the FIMS is capable of measuring aerosol size distributions in 1s (Figure), thereby offering a great advantage in applications requiring high time resolution (Wang et al. 2016). In addition, the coupling of the FIMS with other conventional aerosol instruments provides orders of magnitude more rapid characterization of aerosol optical and microphysical properties. For example, the combination of a differential mobility analyzer, a relative humidity control unit, and a FIMS was used to measure aerosol hygroscopic growth. Such a system reduced the time of measuring the hygroscopic properties of submicron aerosols (six sizes) to less than three minutes in total, with an error within 1%. Pinterich et al. (2017) Aerosol Sci. Technol. accepted Spielman et al. (2017) Aerosol Sci. Technol. accepted Wang et al. (2016) Nature 539:416-419
Effect of ionic strength on barium transport in porous media

NASA Astrophysics Data System (ADS)

Prigiobbe, V.; Ye, Z.

2017-12-01

Hydraulic fracturing (or fracking) is a well stimulation technique used to extract resourcesfrom a low permeability formation. During the operation large volumes of brine, rich ofhazardous chemicals, are produced. Spills of brine from a well or a pit might negativelyimpact underground water resources and one of the major concerns is for the migrationof radionuclides, such as, e.g., radium (Ra2+), into the shallow subsurface [1]. However, thetransport behaviour of Ra2+ through a reactive porous medium under conditions typical of abrine, i.e., high salinity, is not well understood, yet. Here, a study on the transport behaviour ofbarium (Ba2+, congener of radium) through a porous medium containing a common mineralsuch as goethite (FeO(OH)) is presented [2]. Batch and column flood tests were carried out atconditions resembling the produced water, i.e., large values of ionic strength (I), namely, 1to 3 mol/kg. The measurements were described with the triple layer surface complexationmodel coupled with the Pitzer activity coefficient method and a reactive transport model,in the case of the transport tests. The experimental results show that the adsorption of Ba2+onto FeO(OH) increases with pH but decreases with I and it becomes negligible at the brineconditions. Moreover, even if isotherms show adsorption at large I, at the same conditionsduring transport, Ba2+ travels without retardation through the FeO(OH) porous medium. The triple layer model agrees very well with all batch data but it cannot capture wellthe transport test, in particular, at large I values (Figure 1). This may suggest that thechemical reactions at the solid-liquid interface cannot describe well the adsorption of Ba2+onto FeO(OH) at large salinity. Finally, observations in this study suggest that in the case of a produced water spill, barium and potentially its congeners, namely, radium, calcium,magnesium, and strontium, contained in the brine may travel at the average flow velocity through a soil containing iron oxide minerals. References[1] Patterson et al. Environ. Sci. Technol. 2017, 51, 2563-2573.[2] Ye, Z. and Prigiobbe, V. In preparation for: Environ. Sci. Technol. 201X. Figure 1. Measurements and simulations of Ba2+ transport tests for experiments performedusing (a) NaCl = 0 and (b) NaCl = 1 mole/kg.

EDITORIAL: Perspectives Perspectives

NASA Astrophysics Data System (ADS)

Dewhurst, Richard

2011-05-01

In this issue, we are delighted to publish the second in a series of articles under the banner of Perspectives. The series commenced in late 2008, when Udo Kaatze [1] published an article about the powerful technique of dielectric spectrometry for liquid measurements. In addition to examining the very wide frequency range from 10-6 Hz to 10-13 Hz, an outline of possible future developments was presented. Some challenging tasks for the future were briefly outlined. The format of the article was different to the usual style of a contributed paper or review article. Instead, it represented a short summary of recent work in the field and offered a viewpoint of an expert in the area. Its commentary noted several milestones that had been recently achieved, and then looked to the future. The Perspective format allowed the author to provide some opinion about the challenges of the future not normally permitted in a Topical Review. The journal now intends to publish several more Perspectives. For example, in this issue David Birch [2] presents a Perspective about another important measurement science, namely fluorescence detections and their future directions. These are based on an old technique which provided the basis for detecting the presence of molecular species. Successful research led to an understanding and description of the phenomenon of molecular fluorescence in terms of excited state energies, transitions, symmetries and rate parameters. More recently, using fluorescence as a probe, and with the exploitation of new technologies, new applications have included the study of protein, vision, photosynthesis, membranes and DNA. Indeed nowhere has fluorescence had more impact than in the biosciences. Once again, the intention of the Perspective article has been to highlight recent milestones within the field. Importantly, it also indicates some of the future challenges. Such Perspectives are an occasional series. They are not intended to deflect from the balance of MST, where about 20% of papers involve special features, special issues and review articles. The remaining 80% of papers are original, contributed, papers. Nevertheless, we hope readers will find that these new Perspectives are both useful commentaries and also provide an insight into the future of topical fields of research. References [1] Kaatze U 2008 Perspectives in dielectric measurement techniques for liquids Meas. Sci. Technol. 19 112001 [2] Birch D J S 2011 Fluorescence detections and directions Meas. Sci. Technol. 22 052002
Analysis of reversibility and reaction products of glyoxal uptake onto ammonium sulfate aerosol

NASA Astrophysics Data System (ADS)

Galloway, M. M.; Chhabra, P. S.; Chan, A. W.; Surratt, J. D.; Kwan, A. J.; Wennberg, P. O.; Flagan, R. C.; Seinfeld, J. H.; Keutsch, F. N.

2009-04-01

Glyoxal, the smallest alpha-dicarbonyl, is an oxidation product of both biogenic and anthropogenic volatile organic compounds (Fu et al. JGR 113, D15303, 2008). Despite its low molecular weight, its role in secondary organic aerosol (SOA) formation has gained interest and a recent study suggested that it accounts for more than 15% of SOA in Mexico City (Volkamer et al. GRL 34, L19807, 2007). Despite numerous previous studies, questions remain regarding the processes controlling glyoxal uptake onto aerosol, including the role of acid catalysis, degree of reversibility, and identity of aerosol phase reaction products. We present results of chamber aerosol studies (Galloway et al. ACPD 8, 20799, 2008) and laboratory studies of bulk samples aimed at improving the understanding of these processes, in particular formation of oligomers and organosulfates of glyoxal, as well as the formation of imidazoles (carbon-nitrogen containing heterocyclic aromatic compounds) under dark and irradiated conditions. The relevance of these classes of reaction products extends beyond glyoxal, as evidence of oligomers and organosulfates other than those of glyoxal have been found in ambient aerosol (Surratt et al. JPCA 112, 8345, 2008; Denkenberger et al. Environ. Sci. Technol. 41, 5439, 2007). Experiments in which a chamber air mass was diluted after equilibration of glyoxal uptake onto ammonium sulfate seed aerosol (relative humidity 60% and glyoxal mixing ratios of 25-200 ppbv) shows that under these conditions uptake is reversible. The most important condensed phase products are hydrated oligomers of glyoxal, which are also formed reversibly under these conditions. Our studies show that organosulfates were not formed under dark conditions for neutral or acidified aerosol; similarly, Minerath et al. have recently shown that formation of a different class of organosulfates (alkyl sulfates) also proceeds very slowly even under acidic conditions (Environ. Sci. Technol. 42, 4410, 2008). The masses assigned to sulfate esters in previous work (Liggio et al. Environ. Sci. Technol. 39, 1532, 2005) via low resolution AMS studies were assigned as glyoxal oligomers in our study via high resolution AMS spectra. However, organosulfates were identified under irradiated conditions, and we present attempts to identify the specific species via comparison with lab synthesized organosulfates. The influence of irradiation on organosulfate formation is still under investigation. Under irradiated conditions we see clear evidence for active oxidative photochemistry. The aerosol phase becomes increasingly oxidized and oxidation products, such as organic acids, similar to those observed in studies using bulk samples by Carlton et al. (Atmos. Environ. 41, 7588, 2007) are formed. Overall uptake is reduced under our experimental conditions, likely due to increasing temperature and decreasing relative humidity. We also report observation of imidazoles (carbon-nitrogen containing aromatic heterocycles) resulting from reaction of glyoxal with the nitrogen component of the ammonium sulfate seed aerosol. The imidazoles form irreversibly under dark and irradiated conditions, in ammonium sulfate and acidified ammonium sulfate (pH~1) aerosol. The molecular framework of imidazoles is very stable as a result of the aromaticity. The primary imidazole product, which has a low vapor pressure estimated at 0.0014 Torr, is predicted to be present as a (protonated) cation, owing to its basicity (pKB = 7). It is thus likely not a candidate for repartitioning to the gas phase. Evidence for participation of ammonium in reactions with glyoxal using bulk samples has recently been reported by Noziere et al. (JPCA 113, 231, 2008; ACPD 9, 1, 2009). This study reveals the complex chemistry occurring within ammonium sulfate seed aerosol even for systems with greatly reduced complexity compared to atmospheric aerosol. The results increase our understanding of the contribution of glyoxal to SOA formation processes. More specifically, these results provide valuable insights into important aerosol processes, such as organosulfate and oligomer formation, as well as the formation of aromatic nitrogen containing heterocycles from reaction of a carbonyl with ammonium sulfate aerosol.
Heterogeneous freezing of droplets with immersed surface modified mineral dust particles

NASA Astrophysics Data System (ADS)

Hartmann, Susan

2010-05-01

In the framework of the international measurement campaign FROST II (FReezing Of duST), the heterogeneous freezing of droplets with an immersed surface modified size-segregated mineral dust particles was investigated at LACIS (Leipzig Aerosol Cloud Interaction Simulator, Stratmann et al. 2004). The following measurements were done: LACIS, CFDC (Continuous Flow thermal gradient Diffusion Chamber, Rogers (1988)) and FINCH (Fast Ice Nucleus Chamber Counter, Bundke et al (2008)) were used to analyze the immersion freezing behavior of the treated Arizona Test Dust (ATD) particles at different temperature regimes. The ability to act as IN (Ice Nucleus) in the deposition nucleation mode was quantified by the PINC (Portable Ice Nucleation Chamber) and the CFDC instrument. AMS (Aerosol Mass Spectrometers, e.g. Schneider et al. (2005)) and ATOFMS (Aerosol Time-Of-Flight Mass Spectrometer) measurements were applied to determine particle composition. The hygroscopic growth and the critical super-saturations needed for droplet activation were determined by means of an H-TDMA (Humidity-Tandem Differential Mobility Analyzer) and CCN counter (Cloud Condensation Nucleus counter, Droplet Measurement Technologies, Roberts and Nenes (2005)). The 300 nm ATD particles were chemically and physically treated by coating with sulphuric acid (H2SO4, three different coating thicknesses) and ammonium sulphate ((NH4)2SO4) or by thermal treatment with a thermodenuder operating at 250°C. The H2SO4 coating modified the particles by reacting with particle material, forming soluble sulfates and therefore changing surface properties. AMS showed free H2SO4 only for thick H2SO4 coatings. In the heated section of the thermodenuder coating materials were evaporated partly and the surface properties of the particles were additionally altered. Uncoated particles and those coated with thin coatings of H2SO4, showed almost no hygroscopic growth. Particles coated with thicker coatings of H2SO4 and of (NH4)2SO4 grew noticeably above 95% relative humidity. All investigated particles were found to activate at atmospherically relevant super-saturations. All kinds of treatment lower the IN-ability, whereas the deposition nucleation was more sensitive to treatments than the immersion freezing mode. Considering the immersion freezing behavior, pure ATD particles and particles coated with thin coatings of H2SO4 were more efficient IN, than particles with thick H2SO4 or (NH4)2SO4 coatings. Thermal treatments of the particles led to further decrease of the IN capability except for particles coated with (NH4)2SO4, where the heating did not effect the immersion freezing behavior likely due to their already reduced IN ability. In order to specify the temperature-dependent immersion freezing, two parameterization based on either stochastic or singular hypothesis were performed. From both theoretical approaches it can be concluded that the treatments lead to particle surface modifications lowering the nucleation efficiency. References: Bundke, U., B. Nillius, et al. (2008), The fast Ice Nucleus chamber FINCH, Atmospheric Research 90(2-4): 180-186. Rader, D. J. and P. H. McMurry (1986), Application of the Tandem Differential Mobility Analyzer to studies of droplet growth or evaporation, J. Aerosol Sci., Vol. 17, No. 5, pp. 771-787. Roberts, G., and A. Nenes (2005), A continuous-flow streamwise thermal-gradient CCN chamber for atmospheric measurements, Aerosol Sci. Technol., 39, 206-221. Schneider, J., N. Hock, S. Weimer, S. Borrmann, U. Kirchner, R. Vogt, and V. Scheer (2005), Nucleation particles in Diesel exhaust: Composition inferred from in situ mass spectrometric analysis, Environ. Sci. Technol., 39, 6153-6161. Rogers,D .C. (1988), Developmenot f a continuousflow thermal gradient diffusion chamber for ice nucleation studies. Atmospheric Research, 22, 149-181. Stratmann, F., A. Kiselev, S. Wurzler, M. Wendisch, J. Heintzenberg, R. J. Charlson, K. Diehl, H. Wex, and S. Schmidt (2004), Laboratory studies and numerical simulations of cloud droplet formation under realistic super-saturation conditions, J. Atmos. Oceanic Technol., 21, 876-887.
Modeling spatially- and temporally-explicit water stress indices for use in life cycle assessment

NASA Astrophysics Data System (ADS)

Scherer, L.; Venkatesh, A.; Karuppiah, R.; Usadi, A.; Pfister, S.; Hellweg, S.

2013-12-01

Water scarcity is a regional issue in many areas across the world, and can affect human health and ecosystems locally. Water stress indices (WSIs) have been developed as quantitative indicators of such scarcities - examples include the Falkenmark indicator, Social Water Stress Index, and the Water Supply Stress Index1. Application of these indices helps us understand water supply and demand risks for multiple users, including those in the agricultural, industrial, residential and commercial sectors. Pfister et al.2 developed a method to calculate WSIs that were used to estimate characterization factors (CFs) in order to quantify environmental impacts of freshwater consumption within a life cycle assessment (LCA) framework. Global WSIs were based on data from the WaterGAP model3, and presented as annual averages for watersheds. Since water supply and demand varies regionally and temporally, the resolution used in Pfister et al. does not effectively differentiate between seasonal and permanent water scarcity. This study aims to improve the temporal and spatial resolution of the water scarcity calculations used to estimate WSIs and CFs. We used the Soil and Water Assessment Tool (SWAT)4 hydrological model to properly simulate water supply in different world regions with high spatial and temporal resolution, and coupled it with water use data from WaterGAP3 and Pfister et al.5. Input data to SWAT included weather, land use, soil characteristics and a digital elevation model (DEM), all from publicly available global data sets. Potential evapotranspiration, which affects water supply, was determined using an improved Priestley-Taylor approach. In contrast to most other hydrological studies, large reservoirs, water consumption and major water transfers were simulated. The model was calibrated against observed monthly discharge, actual evapotranspiration, and snow water equivalents wherever appropriate. Based on these simulations, monthly WSIs were calculated for a few model regions (including Africa and North America). These WSIs were used to estimate revised CFs for freshwater consumption to be used in LCAs. Future work will extend results to a global scale. References 1. Brown, A., Matlock, M., 2011. A Review of Water Scarcity Indices and Methodologies, University of Kansas, The Sustainability Consortium, White Paper #106. 2. Pfister, S., Koehler, A., Hellweg, S., 2009. Assessing the Environmental Impacts of Freshwater Consumption in LCA. Environ. Sci. Technol. 43 (11), 4098-4104. 3. Alcamo, J.; Doll, P.; Henrichs, T.; Kaspar, F.; Lehner, B.; Rosch, T.; Siebert, S. Development and testing of the WaterGAP 2 global model of water use and availability Hydrol. Sci. J. 2003, 48 (3) 317- 337. 4. Arnold, J.G., Srinivasan, R., Muttiah, R.S., Allen, P.M., 1999. Continental scale simulation of the hydrologic balance. J. Am.Water Resour. Assoc. 35 (5), 1037-1051. 5. Pfister, S., Bayer, P., Koehler, A., Hellweg, S., 2011. Environmental Impacts of Water Use in Global Crop Production: Hotspots and Trade-Offs with Land Use. Environ. Sci. Technol. 45 (13), 5761- 5768.
Development of diagnostic and manipulation systems for space-charge dominated electron beams and confined electron plasmas in ELTRAP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rome, M.; Cavaliere, F.; Maero, G.

2013-03-19

Modifications have been implemented in the Penning-Malmberg device ELTRAP aimed at performing studies on the dynamics of space-charge dominated nanosecond electron bunches traveling along the magnetic field. In particular, a Thomson backscattering apparatus has been developed where an infrared (IR) laser pulse collides with the bunched electron beam. The frequency-shifted backscattered radiation, acquired by means of a photomultiplier (PMT), can be exploited to evaluate information on energy, energy spread and density of the bunch. The achievable sensitivity of the diagnostics has been estimated, and valuable information on the main parameters affecting the signal-to-noise (S/N) ratio has been obtained [B. Paroli,more » F. Cavaliere, M. Cavenago, F. De Luca, M. Ikram, G. Maero, C. Marini, R. Pozzoli, and M. Rome, JINST 7, P01008 (2012)]. A series of upgrades are under way, aimed at increasing the S/N ratio through the use of a new laser for the electron source, the insertion of a stray light shield, and the optimization of the detection electronics. Moreover, electromagnetic simulations relevant to the design and implementation of a microwave heating system are presented. The generation of an electron plasma in ELTRAP by means of a low-power radio frequency (RF) drive in the MHz range applied on one of the trap electrodes and under ultra-high vacuum (UHV) conditions has previously been demonstrated [B. Paroli, F. De Luca, G. Maero, F. Pozzoli, and M. Rome, Plasma Sources Sci. Technol. 19, 045013 (2010)]. The new heating system will allow the extension of the RF studies to the GHz range and in particular the production of a more energetic electron plasma via cyclotron resonant excitation.« less
Wave modeling in a cylindrical non-uniform helicon discharge

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, L.; Hole, M. J.; Caneses, J. F.

2012-08-15

A radio frequency field solver based on Maxwell's equations and a cold plasma dielectric tensor is employed to describe wave phenomena observed in a cylindrical non-uniform helicon discharge. The experiment is carried out on a recently built linear plasma-material interaction machine: The magnetized plasma interaction experiment [Blackwell et al., Plasma Sources Sci. Technol. (submitted)], in which both plasma density and static magnetic field are functions of axial position. The field strength increases by a factor of 15 from source to target plate, and the plasma density and electron temperature are radially non-uniform. With an enhancement factor of 9.5 to themore » electron-ion Coulomb collision frequency, a 12% reduction in the antenna radius, and the same other conditions as employed in the experiment, the solver produces axial and radial profiles of wave amplitude and phase that are consistent with measurements. A numerical study on the effects of axial gradient in plasma density and static magnetic field on wave propagations is performed, revealing that the helicon wave has weaker attenuation away from the antenna in a focused field compared to a uniform field. This may be consistent with observations of increased ionization efficiency and plasma production in a non-uniform field. We find that the relationship between plasma density, static magnetic field strength, and axial wavelength agrees well with a simple theory developed previously. A numerical scan of the enhancement factor to the electron-ion Coulomb collision frequency from 1 to 15 shows that the wave amplitude is lowered and the power deposited into the core plasma decreases as the enhancement factor increases, possibly due to the stronger edge heating for higher collision frequencies.« less
EDITORIAL: Announcing the 2007 Measurement Science and Technology Outstanding Paper Awards

NASA Astrophysics Data System (ADS)

Foss, John; Dewhurst, Richard; Fujii, Kenichi; Regtien, Paul

2008-05-01

Since 1991, Measurement Science and Technology has awarded a Best Paper prize. The Editorial Board of this journal believes that such a prize is an opportunity to thank authors for submitting their work, and serves as an integral part of the on-going quality review of the journal. The current breadth of topical areas that are covered by MST has made it advisable to expand the recognition of excellent publications. Hence, since 2005 the Editorial Board have presented 'Outstanding Paper Awards' in four subject categories: Fluid Mechanics; Measurement Science; Precision Measurements; and Sensors and Sensing Systems. 2007 Award Winners—Fluid Mechanics An adaptive sampling and windowing interrogation method in PIV R Theunissen, F Scarano and M L Riethmuller von Karman Institute for Fluid Dynamics, Chaussée de Waterloo 72, 1640 Sint-Genesius Rode, Belgium and Department of Aerospace Engineering, Delft University of Technology, Delft, PO Box 5058, 2600 GB Delft, The Netherlands The co-authored paper [1] has been selected as the Outstanding Paper in Fluid Mechanics for 2007. This paper provides a strategy whereby the placement and the size of the interrogation regions are adapted to the image signal strength (seeding density) and the spatial variations of the velocity magnitudes. Two, quite distinct, test cases demonstrate the efficacy of their method: a shockwave- boundary layer interaction and an aircraft vortex wake. The Selection Committee—Drs T Fansler, J Foss, I Marusic, S Morris, K Okamoto and M Wernet—selected this paper from a strongly competitive shortlist of four candidates. Their selection process was influenced by the perceived utility of the contribution to the numerous investigators who utilize PIV methods. 2007 Award Winners—Measurement Science Broadband single cell impedance spectroscopy using maximum length sequences: theoretical analysis and practical considerations Tao Sun, Shady Gawad, Catia Bernabini, Nicolas G Green and Hywel Morgan Nanoscale Systems Integration Group, School of Electronics and Computer Science, University of Southampton, Southampton SO17 1BJ, UK The paper [2] describes a novel impedance spectroscopic measurement method for applications in the identification of biological cells. The frequency-dependent impedance is obtained in the frequency domain by applying a fast M-sequence transform (FMT), and a fast Fourier transform (FFT) in the time domain response. Using FMT, the evaluation takes place within a short timescale of the order of milliseconds. This technique is used in a microfluidic impedance cytometer, for the analysis of single biological cells in suspension. The theory of the technique is analysed in depth. It is then applied to an experimental system that characterizes the impedance spectrum of red blood cells within the microfluidic system. Measured spectra show good agreement with simulations. The paper has a short but excellent introduction, supported by a solid reference list of about 55 papers describing related work. Most of these papers are citations from 2000 onwards. This is followed by a detailed analysis of maximum length sequences and theory used for predictions of spectra. It then continues with a useful description of a cytometer that was used to confirm theoretical predictions of spectra. Results are at an early stage. The system is still under development, since there are issues arising from the fact that the particle flows during the acquisition of data, and is not static in the electric field as assumed by the model. Nevertheless, the paper possesses good clarity of the motivation behind the work, of the measurement techniques developed and of the potential relevance to applications in the life sciences. 2007 Award Winners—Precision Measurement Ultraprecision micro-CMM using a low force 3D touch probe A Küng, F Meli and R Thalmann Swiss Federal Office of Metrology (METAS), Lindenweg 50, CH-3003 Bern-Wabern, Switzerland The paper [3] describes a new three-dimensional coordinate measuring machine (CMM) developed for traceable measurement for small objects. The most sophisticated component of the system lies in the structure of its touch probe. It was designed based on a parallel kinematic mechanism with flexure hinges in order to minimize the moving mass and to ensure an isotropic low stiffness. This head features very weak probing forces, below 0.5 mN, and supports exchangeable probes down to 0.1 mm diameter, realizing a measurement without introducing any plastic deformation on the surface of the object. It was then combined with a highly accurate 90 mm × 90 mm × 38 mm air bearing stage with interferometric position measurement with no Abbe offset, achieving a typical reproducibility of 5 nm in measuring various shapes of the objects. In order to evaluate the contribution of the shape deviation of the probing sphere to the uncertainty, a new calibration method with three spheres has been developed in this work. In addition, a scanning measurement procedure was also implemented for fast measurement without any loss of accuracy, contributing to practical measurement for users. The selection committee members on precision measurement—Drs K Fujii and A Yacoot—and Editorial Board members Drs P Hauptmann, U Kaatze and M Player, selected this paper from a strongly competitive list of nine candidates. The paper opened a new way for achieving an unprecedented accuracy in coordinate metrology. 2007 Award Winners—Sensors and Sensing Systems Two-dimensional optical accelerometer based on commercial DVD pick-up head Chih-Liang Chu, Cha-Hao Lin and Kuang-Chao Fan Department of Mechanical Engineering, Southern Taiwan University of Technology, Tainan, Taiwan, Republic of China and Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan, Republic of China The authors describe in this paper [4] a 2D accelerometer that is based on a simple DVD pick-up head. It is a considerable extension of an earlier paper [5] dealing with a similar device but restricted to 1D only. In the awarded paper, not only is the extension to 2D presented, but also a thorough analysis of the system's performance is given. A clear description of the general concept is followed by the derivation of the intensity distribution on the four-quadrant photodetector. In the next section, the design of the mechanical part is detailed, including a FEM analysis for obtaining optimal performance characteristics in terms of resonance frequency, sensitivity and range. The system is extensively tested, and the paper presents a useful selection of the measurement data in graphical and numerical format. Altogether, theory, experimental and measurement results are presented in a clear and well balanced way, and illustrated with neat graphics. A missing uncertainty analysis is the only deficiency in this otherwise excellent paper. A sequel to this paper from the same authors appeared a few issues later [6], presenting the DVD head as a nanoscale touch trigger probe. Both papers belong to the top 60 most downloaded papers in the 2007 volume. The Outstanding Paper Awards, comprising a cash honorarium and certificate, will be presented to the authors of the winning papers at suitable venues in the near future. The Editorial Board would like to congratulate the winning authors and would like to encourage all researchers to think of Measurement Science and Technology as the home for your best submissions. References [1] Theunissen R, Scarano F and Riethmuller M L 2007 An adaptive sampling and windowing interrogation method in PIV Meas. Sci. Technol. 18 275-87 [2] Sun T, Gawad S, Bernabini C, Green N G and Morgan H 2007 Broadband single cell impedance spectroscopy using maximum length sequences: theoretical analysis and practical considerations Meas. Sci. Technol. 18 2859-68 [3] Küng A, Meli F and Thalmann R 2007 Ultraprecision micro-CMM using a low force 3D touch probe Meas. Sci. Technol. 18 319-27 [4] Chu C-L, Lin C-H and Fan K-C 2007 Two-dimensional optical accelerometer based on commercial DVD pick-up head Meas. Sci. Technol. 18 265-74 [5] Chu C-L and Lin C-H 2005 Development of an optical accelerometer with a DVD pick-up head Meas. Sci. Technol. 16 2498-502 [6] Chu C-L and Chiu C-Y 2007 Development of a low-cost nanoscale touch trigger probe based on two commercial DVD pick-up heads Meas. Sci. Technol. 18 1831-42
Comparison of surface vacuum ultraviolet emissions with resonance level number densities. II. Rare-gas plasmas and Ar-molecular gas mixtures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boffard, John B., E-mail: jboffard@wisc.edu; Lin, Chun C.; Wang, Shicong

2015-03-15

Vacuum ultraviolet (VUV) emissions from excited plasma species can play a variety of roles in processing plasmas, including damaging the surface properties of materials used in semiconductor processing. Depending on their wavelength, VUV photons can easily transmit thin upper dielectric layers and affect the electrical characteristics of the devices. Despite their importance, measuring VUV fluxes is complicated by the fact that few materials transmit at VUV wavelengths, and both detectors and windows are easily damaged by plasma exposure. The authors have previously reported on measuring VUV fluxes in pure argon plasmas by monitoring the concentrations of Ar(3p{sup 5}4s) resonance atomsmore » that produce the VUV emissions using noninvasive optical emission spectroscopy in the visible/near-infrared wavelength range [Boffard et al., J. Vac. Sci. Technol., A 32, 021304 (2014)]. Here, the authors extend this technique to other rare-gases (Ne, Kr, and Xe) and argon-molecular gas plasmas (Ar/H{sub 2}, Ar/O{sub 2}, and Ar/N{sub 2}). Results of a model for VUV emissions that couples radiation trapping and the measured rare-gas resonance level densities are compared to measurements made with both a calibrated VUV photodiode and a sodium salicylate fluorescence detection scheme. In these more complicated gas mixtures, VUV emissions from a variety of sources beyond the principal resonance levels of the rare gases are found to contribute to the total VUV flux.« less
Characterisation of the incident beam and current diffraction capabilities on the VESUVIO spectrometer

NASA Astrophysics Data System (ADS)

Romanelli, G.; Krzystyniak, M.; Senesi, R.; Raspino, D.; Boxall, J.; Pooley, D.; Moorby, S.; Schooneveld, E.; Rhodes, N. J.; Andreani, C.; Fernandez-Alonso, F.

2017-09-01

The VESUVIO spectrometer at the ISIS pulsed neutron and muon source is a unique instrument amongst those available at neutron facilities. This is the only inverted-geometry neutron spectrometer accessing values of energy and wavevector transfer above tens of eV and {\\mathringA}-1 , respectively, and where deep inelastic neutron scattering experiments are routinely performed. As such, the procedure at the base of the technique has been previously described in an article published by this journal (Mayers and Reiter 2012 Meas. Sci. Technol. 23 045902). The instrument has recently witnessed an upsurge of interest due to a new trend to accommodate, within a single experiment, neutron diffraction and transmission measurements in addition to deep inelastic neutron scattering. This work presents a broader description of the instrument following these recent developments. In particular, we assess the absolute intensity and two-dimensional profile of the incident neutron beam and the capabilities of the backscattering diffraction banks. All results are discussed in the light of recent changes to the moderator viewed by the instrument. We find that VESUVIO has to be considered a high-resolution diffractometer as much as other diffractometers at ISIS, with a resolution as high as 2× 10-3 in backscattering. Also, we describe the extension of the wavelength range of the instrument to include lower neutron energies for diffraction measurements, an upgrade that could be readily applied to other neutron instruments as well.
Comparison of different measurement methods for transmittance haze

NASA Astrophysics Data System (ADS)

Yu, Hsueh-Ling; Hsaio, Chin-Chai

2009-08-01

Transmittance haze is increasingly important to the LCD and solar cell industry. Most commercial haze measurement instruments are designed according to the method recommended in the documentary standards like ASTM D 1003 (ASTM 2003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics), JIS K 7361 (JIS 1997 Plastics—Determination of the Total Luminous Transmittance of Transparent Materials—Part 1: Single Beam Instrument) and ISO 14782 (ISO 1997 Plastics—Determination of Haze of Transparent Materials). To improve the measurement accuracy of the current standards, a new apparatus was designed by the Center for Measurement Standards (Yu et al 2006 Meas. Sci. Technol. 17 N29-36). Besides the methods mentioned above, a double-beam method is used in the design of some instruments. There are discrepancies between the various methods. But no matter which method is used, a white standard is always needed. This paper compares the measurement results from different methods, presents the effect of the white standard, and analyses the measurement uncertainty.
FPGA-based photon-counting phase-modulation fluorometer and a brief comparison with that operated in a pulsed-excitation mode

NASA Astrophysics Data System (ADS)

Iwata, Tetsuo; Taga, Takanori; Mizuno, Takahiko

2018-02-01

We have constructed a high-efficiency, photon-counting phase-modulation fluorometer (PC-PMF) using a field-programmable gate array, which is a modified version of the photon-counting fluorometer (PCF) that works in a pulsed-excitation mode (Iwata and Mizuno in Meas Sci Technol 28:075501, 2017). The common working principle for both is the simultaneous detection of the photoelectron pulse train, which covers 64 ns with a 1.0-ns resolution time (1.0 ns/channel). The signal-gathering efficiency was improved more than 100 times over that of conventional time-correlated single-photon-counting at the expense of resolution time depending on the number of channels. The system dead time for building a histogram was eliminated, markedly shortening the measurement time for fluorescent samples with moderately high quantum yields. We describe the PC-PMF and make a brief comparison with the pulsed-excitation PCF in precision, demonstrating the potential advantage of PC-PMF.
Current profile redistribution driven by neutral beam injection in a reversed-field pinch

NASA Astrophysics Data System (ADS)

Parke, E.; Anderson, J. K.; Brower, D. L.; Den Hartog, D. J.; Ding, W. X.; Johnson, C. A.; Lin, L.

2016-05-01

Neutral beam injection in reversed-field pinch (RFP) plasmas on the Madison Symmetric Torus [Dexter et al., Fusion Sci. Technol. 19, 131 (1991)] drives current redistribution with increased on-axis current density but negligible net current drive. Internal fluctuations correlated with tearing modes are observed on multiple diagnostics; the behavior of tearing mode correlated structures is consistent with flattening of the safety factor profile. The first application of a parametrized model for island flattening to temperature fluctuations in an RFP allows inferrence of rational surface locations for multiple tearing modes. The m = 1, n = 6 mode is observed to shift inward by 1.1 ± 0.6 cm with neutral beam injection. Tearing mode rational surface measurements provide a strong constraint for equilibrium reconstruction, with an estimated reduction of q0 by 5% and an increase in on-axis current density of 8% ± 5%. The inferred on-axis current drive is consistent with estimates of fast ion density using TRANSP [Goldston et al., J. Comput. Phys. 43, 61 (1981)].
Theoretical analysis of field emission from a metal diamond cold cathode emitter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lerner, P.; Cutler, P.H.; Miskovsky, N.M.

Recently, Geis {ital et al.} [J. Vac. Sci. Technol. B {bold 14}, 2060 (1996)] proposed a cold cathode emitter based on a Spindt-type design using a diamond film doped by substitutional nitrogen. The device is characterized by high field emission currents at very low power. Two properties, the rough surface of the metallic injector and the negative electron affinity of the (111) surface of the diamond are essential for its operation. We present a first consistent quantitative theory of the operation of a Geis{endash}Spindt diamond field emitter. Its essential features are predicated on nearly {ital zero-field conditions} in the diamondmore » beyond the depletion layer, {ital quasiballistic transport} in the conduction band, and applicability of a modified {ital Fowler{endash}Nordheim equation} to the transmission of electrons through the Schottky barrier at the metal-diamond interface. Calculated results are in good qualitative and quantitative agreement with the experimental results of Geis {ital et al.} {copyright} {ital 1997 American Vacuum Society.}« less
Improvement of the ESR detection of irradiated food containing cellulose employing a simple extraction method

NASA Astrophysics Data System (ADS)

Delincée, Henry; Soika, Christiane

2002-03-01

Fruit may be irradiated at rather low doses, below 1 kGy in combination treatments or for quarantine purposes. To improve the ESR detection sensitivity of irradiated fruit de Jesus et al. (Int. J. Food Sci. Technol. 34 (1999) 173.) proposed extracting the fruit pulp with 80% ethanol and measuring the residue with ESR using low power (0.25 mW) for detection of 'cellulosic' radicals. An improvement in ESR sensitivity using the extraction procedure could be confirmed in this paper for strawberries and papayas. In most cases, a radiation dose of 0.5 kGy could be detected in both fruits even after 2-3 weeks storage. In addition, some herbs and spices were also tested, but only for a few of them the ESR detection of the 'cellulosic' signal was improved by previous alcoholic extraction. As an alternative to ESR measurements, other detection methods like DNA Comet Assay and thermoluminescence were also tested.
Exploring the limits of case-to-capsule ratio, pulse length, and picket energy for symmetric hohlraum drive on the National Ignition Facility Laser

NASA Astrophysics Data System (ADS)

Callahan, D. A.; Hurricane, O. A.; Ralph, J. E.; Thomas, C. A.; Baker, K. L.; Benedetti, L. R.; Berzak Hopkins, L. F.; Casey, D. T.; Chapman, T.; Czajka, C. E.; Dewald, E. L.; Divol, L.; Döppner, T.; Hinkel, D. E.; Hohenberger, M.; Jarrott, L. C.; Khan, S. F.; Kritcher, A. L.; Landen, O. L.; LePape, S.; MacLaren, S. A.; Masse, L. P.; Meezan, N. B.; Pak, A. E.; Salmonson, J. D.; Woods, D. T.; Izumi, N.; Ma, T.; Mariscal, D. A.; Nagel, S. R.; Kline, J. L.; Kyrala, G. A.; Loomis, E. N.; Yi, S. A.; Zylstra, A. B.; Batha, S. H.

2018-05-01

We present a data-based model for low mode asymmetry in low gas-fill hohlraum experiments on the National Ignition Facility {NIF [Moses et al., Fusion Sci. Technol. 69, 1 (2016)]} laser. This model is based on the hypothesis that the asymmetry in these low fill hohlraums is dominated by the hydrodynamics of the expanding, low density, high-Z (gold or uranium) "bubble," which occurs where the intense outer cone laser beams hit the high-Z hohlraum wall. We developed a simple model which states that the implosion symmetry becomes more oblate as the high-Z bubble size becomes large compared to the hohlraum radius or the capsule size becomes large compared to the hohlraum radius. This simple model captures the trends that we see in data that span much of the parameter space of interest for NIF ignition experiments. We are now using this model as a constraint on new designs for experiments on the NIF.
Growth anisotropy effect of bulk high temperature superconductors on the levitation performance in the applied magnetic field

NASA Astrophysics Data System (ADS)

Zheng, J.; Liao, X. L.; Jing, H. L.; Deng, Z. G.; Yen, F.; Wang, S. Y.; Wang, J. S.

2013-10-01

Growth anisotropies of bulk high temperature superconductors (HTSCs) fabricated by a top-seeded melt texture growth process, that is, different pinning effect in the growth sectors (GSs) and growth sector boundaries (GSBs), possess effect on the macro flux trapping and levitation performance of bulk HTSCs. Previous work (Physics Procedia, 36 (2012) 1043) has found that the bulk HTSC array with aligned GSB pattern (AGSBP) exhibits better capability for levitation and suppression of levitation force decay above a permanent magnet guideway (PMG) compared with misaligned GSB pattern (MGSBP). In this paper, we further examine this growth anisotropy effect on the maglev performance of a double-layer bulk HTSC. In contrast to reported trapped flux cases (Supercond. Sci. Technol. 19 (2006) S466), the two superposed bulk HTSCs with same AGSBP with PMG are found to show better maglev performance. These series of results are helpful and support a new way for the performance optimization of present HTS maglev systems.
A mathematical analysis of the ABCD criteria for diagnosing malignant melanoma

NASA Astrophysics Data System (ADS)

Lee, Hyunju; Kwon, Kiwoon

2017-03-01

The medical community currently employs the ABCD (asymmetry, border irregularity, color variegation, and diameter of the lesion) criteria in the early diagnosis of a malignant melanoma. Although many image segmentation and classification methods are used to analyze the ABCD criteria, it is rare to see a study containing mathematical justification of the parameters that are used to quantify the ABCD criteria. In this paper, we suggest new parameters to assess asymmetry, border irregularity, and color variegation, and explain the mathematical meaning of the parameters. The suggested parameters are then tested with 24 skin samples. The parameters suggested for the 24 skin samples are displayed in three-dimensional coordinates and are compared to those presented in other studies (Ercal et al 1994 IEEE Trans. Biomed. Eng. 41 837-45, Cheerla and Frazier 2014 Int. J. Innovative Res. Sci., Eng. Technol. 3 9164-83) in terms of Pearson correlation coefficient and classification accuracy in determining the malignancy of the lesions.
Phenomenological scattering-rate model for the simulation of the current density and emission power in mid-infrared quantum cascade lasers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurlov, S. S.; Institute of Semiconductor Physics, National Academy of Sciences, pr. Nauki 45, Kiev-03028; Flores, Y. V.

2016-04-07

A phenomenological scattering-rate model introduced for terahertz quantum cascade lasers (QCLs) [Schrottke et al., Semicond. Sci. Technol. 25, 045025 (2010)] is extended to mid-infrared (MIR) QCLs by including the energy dependence of the intersubband scattering rates for energies higher than the longitudinal optical phonon energy. This energy dependence is obtained from a phenomenological fit of the intersubband scattering rates based on published lifetimes of a number of MIR QCLs. In our approach, the total intersubband scattering rate is written as the product of the exchange integral for the squared moduli of the envelope functions and a phenomenological factor that dependsmore » only on the transition energy. Using the model to calculate scattering rates and imposing periodical boundary conditions on the current density, we find a good agreement with low-temperature data for current-voltage, power-current, and energy-photon flux characteristics for a QCL emitting at 5.2 μm.« less
Numerical Simulation for Predicting Fatigue Damage Progress in Notched CFRP Laminates by Using Cohesive Elements

NASA Astrophysics Data System (ADS)

Okabe, Tomonaga; Yashiro, Shigeki

This study proposes the cohesive zone model (CZM) for predicting fatigue damage growth in notched carbon-fiber-reinforced composite plastic (CFRP) cross-ply laminates. In this model, damage growth in the fracture process of cohesive elements due to cyclic loading is represented by the conventional damage mechanics model. We preliminarily investigated whether this model can appropriately express fatigue damage growth for a circular crack embedded in isotropic solid material. This investigation demonstrated that this model could reproduce the results with the well-established fracture mechanics model plus the Paris' law by tuning adjustable parameters. We then numerically investigated the damage process in notched CFRP cross-ply laminates under tensile cyclic loading and compared the predicted damage patterns with those in experiments reported by Spearing et al. (Compos. Sci. Technol. 1992). The predicted damage patterns agreed with the experiment results, which exhibited the extension of multiple types of damage (e.g., splits, transverse cracks and delaminations) near the notches.
Summary: Update to ASTM guide E 1523 to charge control and charge referencing techniques in x-ray photoelectron spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baer, D.R.

2005-05-01

An updated version of the American Society for Testing and Materials (ASTM) guide E 1523 to the methods to charge control and charge referencing techniques in x-ray photoelectron spectroscopy has been released by ASTM [Annual Book of ASTM Standards Surface Analysis (American Society for Testing and Materials, West Conshohocken, PA, 2004), Vol. 03.06]. The guide is meant to acquaint x-ray photoelectron spectroscopy (XPS) users with the various charge control and charge referencing techniques that are and have been used in the acquisition and interpretation of XPS data from surfaces of insulating specimens. The current guide has been expanded to includemore » new references as well as recommendations for reporting information on charge control and charge referencing. The previous version of the document had been published in 1997 [D. R. Baer and K. D. Bomben, J. Vac. Sci. Technol. A 16, 754 (1998)].« less

Responding to Students' Learning Preferences in Chemistry

NASA Astrophysics Data System (ADS)

Lewthwaite, Brian; Wiebe, Rick

2014-04-01

This paper reports on a teacher's and his students' responsiveness to a new tetrahedral-oriented (Mahaffy in J Chem Educ 83(1):49-55, 2006) curriculum requiring more discursive classroom practices in the teaching of chemistry. In this instrumental case study, we identify the intentions of this learner-centered curriculum and a teacher's development in response to this curriculum. We also explore the tensions this teacher experiences as students subsequently respond to his adjusted teaching. We use a Chemistry Teacher Inventory (Lewthwaite and Wiebe in Res Sci Educ 40(11):667-689, 2011; Lewthwaite and Wiebe in Can J Math Sci Technol Educ 12(1):36-61, 2012; Lewthwaite in Chem Educ Res Pract. doi:10.1039/C3RP00122A, 2014) to assist the teacher in monitoring how he teaches and how he would like to improve his teaching. We also use a student form of the instrument, the Chemistry Classroom Inventory and Classroom Observation Protocol (Lewthwaite and Wiebe 2011) to verify the teacher's teaching and perception of student preferences for his teaching especially in terms of the discursive processes the curriculum encourages. By so doing, the teacher is able to use both sets of data as a foundation for critical reflection and work towards resolution of the incongruence in data arising from students' preferred learning orientations and his teaching aspirations. Implications of this study in regards to the authority of students' voice in triggering teachers' pedagogical change and the adjustments in `teachering' and `studenting' required by such curricula are considered.
Label-free carbon particulates detection in bio (medical) settings (Conference Presentation)

NASA Astrophysics Data System (ADS)

Steuwe, Christian; Bové, Hannelore; vandeVen, Martin J.; Ameloot, Marcel; Roeffaers, Maarten B. J.

2017-02-01

The adverse health effects of particulate matter exposure are a generally accepted concern. Dramatic statistical figures suggest that fine dust is a main environmental risk in Europe and can be held accountable for hundreds of thousands of deaths per year [1]. Locating and tracking these nanometer sized particles, however, is not straight forward: In epidemiological and toxicology research only measurements based on labels [2] such as radionuclide markers have been applied. In this paper we present a direct, label-free optical contrast mechanism to detect carbon nanoparticles immersed in aqueous environments [3]. The virtue of this technique is its ability to perform in body fluids such as urine but also in cells and tissues. The mechanism is based on white light (WL) generation upon illumination with femtosecond pulsed near-infrared and is therefore non-incandescence related. We demonstrate the technique in various biological settings with dry and suspended carbon black particles (CB), a widely used model compound for soot [4]. Our approach allows for the unequivocal localization of CB alongside of common fluorophores and markers and can be performed on multiphoton laser-scanning microscopy platforms, a system commonly available in research laboratories. [1] European Environment Agency (2015). Press release. [2] Kong et al. Int. J. Mol. Sci. 2013, 14, (11), 22529-22543 [3] Bové and Steuwe et al. Nano letters, 2016, (16) , pages 3173-3178 [4] Arnal et al. Combust. Sci. Technol. 2012, 184, (7-8), 1191-1206.
DOE Office of Scientific and Technical Information (OSTI.GOV)

Metzler, Dominik; Li, Chen; Engelmann, Sebastian

With the increasing interest in establishing directional etching methods capable of atomic scale resolution for fabricating highly scaled electronic devices, the need for development and characterization of atomic layer etching (ALE) processes, or generally etch processes with atomic layer precision, is growing. In this work, a flux-controlled cyclic plasma process is used for etching of SiO 2 and Si at the Angstrom-level. This is based on steady-state Ar plasma, with periodic, precise injection of a fluorocarbon (FC) precursor (C 4F 8 and CHF 3), and synchronized, plasma-based Ar+ ion bombardment [D. Metzler et al., J Vac Sci Technol A 32,more » 020603 (2014), and D. Metzler et al., J Vac Sci Technol A 34, 01B101 (2016)]. For low energy Ar+ ion bombardment conditions, physical sputter rates are minimized, whereas material can be etched when FC reactants are present at the surface. This cyclic approach offers a large parameter space for process optimization. Etch depth per cycle, removal rates, and self-limitation of removal, along with material dependence of these aspects, were examined as a function of FC surface coverage, ion energy, and etch step length using in situ real time ellipsometry. The deposited FC thickness per cycle is found to have a strong impact on etch depth per cycle of SiO 2 and Si, but is limited with regard to control over material etching selectivity. Ion energy over the 20 to 30 eV range strongly impacts material selectivity. The choice of precursor can have a significant impact on the surface chemistry and chemically enhanced etching. CHF 3 has a lower FC deposition yield for both SiO 2 and Si, and also exhibits a strong substrate dependence of FC deposition yield, in contrast to C4F 8. The thickness of deposited FC layers using CHF 3 is found to be greater for Si than for SiO 2. X-ray photoelectron spectroscopy was used to study surface chemistry. When thicker FC films of 11 Å are employed, strong changes of FC film chemistry during a cycle are seen whereas the chemical state of the substrate varies much less. On the other hand, for FC film deposition of 5 Å for each cycle, strong substrate surface chemical changes are seen during an etching cycle. The nature of this cyclic etching with periodic deposition of thin FC films differs significantly from conventional etching with steady-state FC layers since surface conditions change strongly throughout each cycle.« less
A thermal desorption mass spectrometer for freshly nucleated secondary aerosol particles

NASA Astrophysics Data System (ADS)

Held, A.; Gonser, S. G.

2012-04-01

Secondary aerosol formation in the atmosphere is observed in a large variety of locations worldwide, introducing new particles to the atmosphere which can grow to sizes relevant for health and climate effects of aerosols. The chemical reactions leading to atmospheric secondary aerosol formation are not yet fully understood. At the same time, analyzing the chemical composition of freshly nucleated particles is still a challenging task. We are currently finishing the development of a field portable aerosol mass spectrometer for nucleation particles with diameters smaller than 30 nm. This instrument consists of a custom-built aerosol sizing and collection unit coupled to a time-of-flight mass spectrometer (TOF-MS). The aerosol sizing and collection unit is composed of three major parts: (1) a unipolar corona aerosol charger, (2) a radial differential mobility analyzer (rDMA) for aerosol size separation, and (3) an electrostatic precipitator for aerosol collection. After collection, the aerosol sample is thermally desorbed, and the resulting gas sample is transferred to the TOF-MS for chemical analysis. The unipolar charger is based on corona discharge from carbon fibres (e.g. Han et al., 2008). This design allows efficient charging at voltages below 2 kV, thus eliminating the potential for ozone production which would interfere with the collected aerosol. With the current configuration the extrinsic charging efficiency for 20 nm particles is 32 %. The compact radial DMA similar to the design of Zhang et al. (1995) is optimized for a diameter range from 1 nm to 100 nm. Preliminary tests show that monodisperse aerosol samples (geometric standard deviation of 1.09) at 10 nm, 20 nm, and 30 nm can easily be separated from the ambient polydisperse aerosol population. Finally, the size-segregated aerosol sample is collected on a high-voltage biased metal filament. The collected sample is protected from contamination using a He sheath counterflow. Resistive heating of the filament allows temperature-controlled desorption of compounds of different volatility. We will present preliminary characterization experiments of the aerosol sizing and collection unit coupled to the mass spectrometer. Funding by the German Research Foundation (DFG) under grant DFG HE5214/3-1 is gratefully acknowledged. Han, B., Kim, H.J., Kim, Y.J., and Sioutas, C. (2008) Unipolar charging of ultrafine particles using carbon fiber ionizers. Aerosol Sci. Technol, 42, 793-800. Zhang, S.-H., Akutsu, Y., Russell, L.M., Flagan, R.C., and Seinfeld, J.H. (1995) Radial Differential Mobility Analyzer. Aerosol Sci. Technol, 23, 357-372.
Characterizing fluorocarbon assisted atomic layer etching of Si using cyclic Ar/C4F8 and Ar/CHF3 plasma

NASA Astrophysics Data System (ADS)

Metzler, Dominik; Li, Chen; Engelmann, Sebastian; Bruce, Robert L.; Joseph, Eric A.; Oehrlein, Gottlieb S.

2017-02-01

With the increasing interest in establishing directional etching methods capable of atomic scale resolution for fabricating highly scaled electronic devices, the need for development and characterization of atomic layer etching processes, or generally etch processes with atomic layer precision, is growing. In this work, a flux-controlled cyclic plasma process is used for etching of SiO2 and Si at the Angstrom-level. This is based on steady-state Ar plasma, with periodic, precise injection of a fluorocarbon (FC) precursor (C4F8 and CHF3) and synchronized, plasma-based Ar+ ion bombardment [D. Metzler et al., J. Vac. Sci. Technol., A 32, 020603 (2014) and D. Metzler et al., J. Vac. Sci. Technol., A 34, 01B101 (2016)]. For low energy Ar+ ion bombardment conditions, physical sputter rates are minimized, whereas material can be etched when FC reactants are present at the surface. This cyclic approach offers a large parameter space for process optimization. Etch depth per cycle, removal rates, and self-limitation of removal, along with material dependence of these aspects, were examined as a function of FC surface coverage, ion energy, and etch step length using in situ real time ellipsometry. The deposited FC thickness per cycle is found to have a strong impact on etch depth per cycle of SiO2 and Si but is limited with regard to control over material etching selectivity. Ion energy over the 20-30 eV range strongly impacts material selectivity. The choice of precursor can have a significant impact on the surface chemistry and chemically enhanced etching. CHF3 has a lower FC deposition yield for both SiO2 and Si and also exhibits a strong substrate dependence of FC deposition yield, in contrast to C4F8. The thickness of deposited FC layers using CHF3 is found to be greater for Si than for SiO2. X-ray photoelectron spectroscopy was used to study surface chemistry. When thicker FC films of 11 Å are employed, strong changes of FC film chemistry during a cycle are seen whereas the chemical state of the substrate varies much less. On the other hand, for FC film deposition of 5 Å for each cycle, strong substrate surface chemical changes are seen during an etching cycle. The nature of this cyclic etching with periodic deposition of thin FC films differs significantly from conventional etching with steady-state FC layers since surface conditions change strongly throughout each cycle.
On the modified Tabor parameter for the JKR-DMT transition in the presence of a liquid meniscus.

PubMed

Xu, Dewei; Liechti, Kenneth M; Ravi-Chandar, K

2007-11-15

The JKR, DMT, Maugis models and Tabor parameter for contact under normal loading have been developed based mainly on solid-solid (van der Waals) interactions. In this case, the characteristic length scale for the adhesive forces in the Tabor parameter is the equilibrium interatomic spacing. However, for contact in humid environments, where a liquid meniscus may be present, capillary forces with a longer force range related to the Kelvin radius dominate. Fogden and White [J. Colloid Interface Sci. 138 (1990) 414] introduced a parameter that includes the Kelvin radius for the JKR-DMT transition. This topic was also addressed by Maugis and Gauthier-Manuel [J. Adhes. Sci. Technol. 8 (1994) 1311] who included capillary effects within the frame work that Maugis had previously established. The parameters introduced by Fogden and White and Maugis and Gauthier-Manuel can be viewed as a modified Tabor parameter for the JKR-DMT transition. In the present work, the Kelvin equation linking the Kelvin radius and the relative humidity was explicitly included in the modified Tabor parameter. This provided a quantitative description of the JKR-DMT transition in terms of the relative humidity. This parameter was examined via load and contact radius measurements, where the latter were obtained from Bowden and Tabor's assumption that the friction force f=tauA. The friction experiments were conducted at two different humidity levels using a newly-developed mesoscale friction tester (MFT), which provides a very wide range of contact radii. The modified Tabor parameter was used to reexamine data from pull-off experiments in water and cyclohexane vapor environments [L.R. Fisher, J.N. Israelachvili, Colloids Surf. 3 (1981) 303 and H.K. Christenson, J. Colloid Interface Sci. 121 (1988) 170]. Finally, guidelines are presented for the appropriate choice of contact mechanics models to be used in interpreting data from SFA and AFM experiments in humid environments.
Astronomical Data Processing Using SciQL, an SQL Based Query Language for Array Data

NASA Astrophysics Data System (ADS)

Zhang, Y.; Scheers, B.; Kersten, M.; Ivanova, M.; Nes, N.

2012-09-01

SciQL (pronounced as ‘cycle’) is a novel SQL-based array query language for scientific applications with both tables and arrays as first class citizens. SciQL lowers the entrance fee of adopting relational DBMS (RDBMS) in scientific domains, because it includes functionality often only found in mathematics software packages. In this paper, we demonstrate the usefulness of SciQL for astronomical data processing using examples from the Transient Key Project of the LOFAR radio telescope. In particular, how the LOFAR light-curve database of all detected sources can be constructed, by correlating sources across the spatial, frequency, time and polarisation domains.
Evaluation of Microlon and Technol-G : final report.

DOT National Transportation Integrated Search

1982-01-01

An evaluation was made of the cost-effectiveness of the automotive products Microlon, an engine treatment consisting of Teflon suspended in a solvent, and Technol-G, a gasoline treating additive consisting of a blend of aliphatic and aromatic distill...
Synthesis and characterizations of nanoscale single crystal GaN grown by ion assisted gas source MBE

NASA Astrophysics Data System (ADS)

Cui, Bentao; Cohen, P. I.

2004-03-01

Nanoscale patterns could be induced by ion bombardment [1, 2]. In this study, an in-situ real time light scattering technique, combined with Reflection High Energy Electron Diffraction (RHEED), were used to study the surface morphology evolution during the ion beam assisted growth of GaN in a gas source MBE system. Ga was provided by a thermal effusion cell. Ammonia was used as the nitrogen source. A hot-filament Kaufman ion source was used to supply sub-KeV ion beams. Sapphire and MOCVD GaN templates were used as the substrates. A custom-designed Desorption Mass Spectrometer (DMS) was used to calibrate the growth temperature and determine the growth rate. Before growing GaN, the sapphire substrates were pretreated in an ion flux and then annealed for cleaning. The sapphire surface was then nitrided in ammonia at 1100K for about 10 min. After nitridation, a thin GaN buffer layer was prepared by a sequence of adsorption and annealing steps. During the growth, the short-range surface morphology and film quality were monitored in situ by RHEED. In a real-time way, the long-range surface morphology was monitored in-situ by light scattering technique. Photodiode array detector and CCD camera were used to record the reflected light scattering intensity and spectra profile respectively. Periodical patterns, such as ripple, have been observed during ion bombardment on GaN with or without growth. A linear theory (from Bradley and Harper 1988 [3]) has been modified to explain the dependence of ripple wavelength on ion species and ion energy. Partially supported by the National Science Foundation and the Air Force Office of Scientific Research. [1]. J. Erlebacher, M. J. Aziz, E. Chason, M. B. Sinclair, and J. A. Floro, Phys. Rev. Lett. 82, 2330 (1998); J. Erlebacher, M. J. Aziz, E. Chason, M. B. Sinclair, and J. A. Floro, Phys. Rev. Lett. 84, 5800 (2000). [2]. S. Facsko, T. Dekorsy, C. Koerdt, C. Trappe, H. Kurz, A. Vogt et al.. Science 285, 1551 (1999). [3]. R. M. Bradley and J. M. E. Harper, J. Vac. Sci. Technol. A 6, 2390 (1988).
Heat Transfer by Thermo-capillary Convection -Sounding Rocket COMPERE Experiment SOURCE

NASA Astrophysics Data System (ADS)

Dreyer, Michael; Fuhrmann, Eckart

The sounding rocket COMPERE experiment SOURCE was successfully flown on MASER 11, launched in Kiruna (ESRANGE), May 15th, 2008. SOURCE has been intended to partly ful-fill the scientific objectives of the European Space Agency (ESA) Microgravity Applications Program (MAP) project AO-2004-111 (Convective boiling and condensation). Three parties of principle investigators have been involved to design the experiment set-up: ZARM for thermo-capillary flows, IMFT (Toulouse, France) for boiling studies, EADS Astrium (Bremen, Ger-many) for depressurization. The topic of this paper is to study the effect of wall heat flux on the contact line of the free liquid surface and to obtain a correlation for a convective heat trans-fer coefficient. The experiment has been conducted along a predefined time line. A preheating sequence at ground was the first operation to achieve a well defined temperature evolution within the test cell and its environment inside the rocket. Nearly one minute after launch, the pressurized test cell was filled with the test liquid HFE-7000 until a certain fill level was reached. Then the free surface could be observed for 120 s without distortion. Afterwards, the first depressurization was started to induce subcooled boiling, the second one to start saturated boiling. The data from the flight consists of video images and temperature measurements in the liquid, the solid, and the gaseous phase. Data analysis provides the surface shape versus time and the corresponding apparent contact angle. Computational analysis provides information for the determination of the heat transfer coefficient in a compensated gravity environment where a flow is caused by the temperature difference between the hot wall and the cold liquid. The paper will deliver correlations for the effective contact angle and the heat transfer coefficient as a function of the relevant dimensionsless parameters as well as physical explanations for the observed behavior. The data will be used for benchmarking of commercial CFD codes and the tank design (using these codes) of future cryogenic upper stages. References Eckart Fuhrmann, Michael E. Dreyer, Description of the Sounding Rocket Experiment SOURCE, Microgravity sci. technol., 20/3-4, 206 (2008)
On non-equilibrium atmospheric pressure plasma jets and plasma bullet

NASA Astrophysics Data System (ADS)

Lu, Xinpei

2012-10-01

Because of the enhanced plasma chemistry, atmospheric pressure nonequilibrium plasmas (APNPs) have been widely studied for several emerging applications such as biomedical applications. For the biomedical applications, plasma jet devices, which generate plasma in open space (surrounding air) rather than in confined discharge gaps only, have lots of advantages over the traditional dielectric barrier discharge (DBD) devices. For example, it can be used for root canal disinfection, which can't be realized by the traditional plasma device. On the other hand, currently, the working gases of most of the plasma jet devices are noble gases or the mixtures of the noble gases with small amount of O2, or air. If ambient air is used as the working gas, several serious difficulties are encountered in the plasma generation process. Amongst these are high gas temperatures and disrupting instabilities. In this presentation, firstly, a brief review of the different cold plasma jets developed to date is presented. Secondly, several different plasma jet devices developed in our lab are reported. The effects of various parameters on the plasma jets are discussed. Finally, one of the most interesting phenomena of APNP-Js, the plasma bullet is discussed and its behavior is described. References: [1] X. Lu, M. Laroussi, V. Puech, Plasma Sources Sci. Technol. 21, 034005 (2012); [2] Y. Xian, X. Lu, S. Wu, P. Chu, and Y. Pan, Appl. Phys. Lett. 100, 123702 (2012); [3] X. Pei, X. Lu, J. Liu, D. Liu, Y. Yang, K. Ostrikov, P. Chu, and Y. Pan, J. Phys. D 45, 165205 (2012).
Iodine-frequency-stabilized laser diode and displacement-measuring interferometer based on sinusoidal phase modulation

NASA Astrophysics Data System (ADS)

Duong, Quang Anh; Vu, Thanh Tung; Higuchi, Masato; Wei, Dong; Aketagawa, Masato

2018-06-01

We propose a sinusoidal phase modulation method to achieve both the frequency stabilization of an external-cavity laser diode (ECLD) to an 127I2 saturated absorption transition near 633 nm and displacement measurement using a Mach–Zehnder interferometer. First, the frequency of the ECLD is stabilized to the b 21 hyperfine component of the P(33) 6-3 transition of 127I2 by combining sinusoidal phase modulation by an electro-optic modulator and frequency modulation spectroscopy by chopping the pump beam using an acousto-optic modulator. Even though a small modulation index of m = 3.768 rad is utilized, a relative frequency stability of 10‑11 order is obtained over a sampling time of 400 s. Secondly, the frequency-stabilized ECLD is applied as a light source to a Mach–Zehnder interferometer. From the two consecutive modulation harmonics (second and third orders) involved in the interferometer signal, the displacement of the moving mirror is determined for four optical path differences (L 0 = 100, 200, 500, and 1000 mm). The measured modulation indexes for the four optical path differences coincide with the designated value (3.768 rad) within 0.5%. Compared with the sinusoidal frequency modulation Michelson interferometer (Vu et al 2016 Meas. Sci. Technol. 27 105201) which was demonstrated by some of the same authors of this paper, the phase modulation Mach–Zhender interferometer could fix the modulation index to a constant value for the four optical path differences. In this report, we discuss the measurement principle, experimental system, and results.
Model analysis of secondary organic aerosol formation by glyoxal in laboratory studies: the case for photoenhanced chemistry.

PubMed

Sumner, Andrew J; Woo, Joseph L; McNeill, V Faye

2014-10-21

The reactive uptake of glyoxal by atmospheric aerosols is believed to be a significant source of secondary organic aerosol (SOA). Several recent laboratory studies have been performed with the goal of characterizing this process, but questions remain regarding the effects of photochemistry on SOA growth. We applied GAMMA (McNeill et al. Environ. Sci. Technol. 2012, 46, 8075-8081), a photochemical box model with coupled gas-phase and detailed aqueous aerosol-phase chemistry, to simulate aerosol chamber studies of SOA formation by the uptake of glyoxal by wet aerosol under dark and irradiated conditions (Kroll et al. J. Geophys. Res. 2005, 110 (D23), 1-10; Volkamer et al. Atmos. Chem. Phys. 2009, 9, 1907-1928; Galloway et al. Atmos. Chem. Phys. 2009, 9, 3331- 306 3345 and Geophys. Res. Lett. 2011, 38, L17811). We find close agreement between simulated SOA growth and the results of experiments conducted under dark conditions using values of the effective Henry's Law constant of 1.3-5.5 × 10(7) M atm(-1). While irradiated conditions led to the production of some organic acids, organosulfates, and other oxidation products via well-established photochemical mechanisms, these additional product species contribute negligible aerosol mass compared to the dark uptake of glyoxal. Simulated results for irradiated experiments therefore fell short of the reported SOA mass yield by up to 92%. This suggests a significant light-dependent SOA formation mechanism that is not currently accounted for by known bulk photochemistry, consistent with recent laboratory observations of SOA production via photosensitizer chemistry.
Reconstruction of the static magnetic field of a magnetron

NASA Astrophysics Data System (ADS)

Krüger, Dennis; Köhn, Kevin; Gallian, Sara; Brinkmann, Ralf Peter

2018-06-01

The simulation of magnetron discharges requires a quantitatively correct mathematical model of the magnetic field structure. This study presents a method to construct such a model on the basis of a spatially restricted set of experimental data and a plausible a priori assumption on the magnetic field configuration. The example in focus is that of a planar circular magnetron. The experimental data are Hall probe measurements of the magnetic flux density in an accessible region above the magnetron plane [P. D. Machura et al., Plasma Sources Sci. Technol. 23, 065043 (2014)]. The a priori assumption reflects the actual design of the device, and it takes the magnetic field emerging from a center magnet of strength m C and vertical position d C and a ring magnet of strength m R , vertical position d R , and radius R. An analytical representation of the assumed field configuration can be formulated in terms of generalized hypergeometric functions. Fitting the ansatz to the experimental data with a least square method results in a fully specified analytical field model that agrees well with the data inside the accessible region and, moreover, is physically plausible in the regions outside of it. The outcome proves superior to the result of an alternative approach which starts from a multimode solution of the vacuum field problem formulated in terms of polar Bessel functions and vertical exponentials. As a first application of the obtained field model, typical electron and ion Larmor radii and the gradient and curvature drift velocities of the electron guiding center are calculated.
EDITORIAL: Announcing the 2011 Measurement Science and Technology Outstanding Paper Awards Announcing the 2011 Measurement Science and Technology Outstanding Paper Awards

NASA Astrophysics Data System (ADS)

Foss, John; Dewhurst, Richard; Fujii, Kenichi; Regtien, Paul; Tatam, Ralph

2012-06-01

Since 1991, Measurement Science and Technology has awarded a Best Paper prize. The Editorial Board of this journal believe that such a prize is an opportunity to thank authors for submitting their work, and serves as an integral part of the on-going quality review of the journal. The current breadth of topical areas that are covered by MST has made it advisable to expand the recognition of excellent publications. Hence, since 2005 the Editorial Board have presented 'Outstanding Paper Awards'. This year awards were presented in the areas of 'Measurement Science', 'Fluid Mechanics' and 'Precision Measurement'. Although the categories mirror subject sections in the journal, the Editorial Board consider articles from all categories in the selection process. 2011 Award Winners—Measurement Science Simultaneous measurement of internal and surrounding flows of a moving droplet using multicolour confocal micro-particle image velocimetry (micro-PIV) M Oishi, H Kinoshita, T Fujii and M Oshima Institute of Industrial Science, The University of Tokyo, 4-6-1 Komaba, Meguro-Ku, Tokyo 153-8505, Japan Interfaculty Initiative in Information Studies, The University of Tokyo, 4-6-1 Komaba, Meguro-Ku, Tokyo 153-8505, Japan Whilst the award last year [1] was concerned with the application of microscopy to ultra-high vacuum dynamic force measurements, this year's award [2] goes to another micro-measurement technique, one concerned with measurements related to particle image velocimetry. The technique relates to multiphase flow in microfluidic devices, and offers a non-contact methodology for examining simultaneous dynamic interactions between flows having different phases. There are several features which make this an excellent paper. It introduces its subject with a clear and concise description of previous advances in related measurement methods, before introducing the additional feature of two-colour fluorescent monitoring of flow in two independent optical channels. By adapting a conventional confocal microscope for PIV measurements, the authors describe how to measure multiphase flow having separate phases in a simultaneous way, exploiting fluorescent markers with wavelength separation. The measurement technique required the integration of several optical systems, including two different laser excitation sources. The novelty of the paper resides with the multicolour separation unit and its optical design, with two synchronized camera systems. Alignment and setting of optical components are crucial for efficient monitoring of light from the conjugate focus. All these experimental features are described in detail and with clarity. The technique gives a measurement methodology for velocity measurements in the x-y plane, in a two-phase medium. Additionally, the out-of-plane, z, component of velocity has been estimated analytically using three-dimensional two-component measured velocity data and the continuity equation. This computational method was exploited with experimental data in a post-processing operation to derive full three-dimensional velocity distributions. Examples are then provided of the behaviour of droplets with surrounding flow. Image sizes are typically 800 × 600 pixels with resolution in the x-y plane of 0.284 µm/pixel. For examples discussed within the paper, the recording frame rate was 990 fps with an exposure time of about 1 ms for high quality PIV images. The results section is detailed and convincing, before the paper reaches a set of concise conclusions. There is also a useful list of 22 references at the end of the paper. The paper was rated as excellent by one of the referees in the initial refereeing process, and since publication it has attracted a high number of downloads. It is bound to make an impact within the PIV community. Readers may also like to know that the authors have since published a related paper [3] which uses this technique to measure the microscopic interaction between red blood cells (RBCs) and surrounding flow. 2011 Award Winners—Fluid Mechanics Acoustic tomographic imaging of temperature and flow fields in air Manuela Barth and Armin Raabe University of Leipzig, Institute for Meteorology, Stephanstraße 3, 04103 Leipzig, Germany This paper [4] provides a valuable measurement strategy for volumetric measurements of the velocity and temperature fields in an airflow over large fields. Given that the speed of sound in the medium is influenced by humidity, the recovered temperature is termed 'acoustic virtual temperature' (Tav). The method is demonstrated for a volume of order 1 m3. It can, in principle, be scaled to a much larger domain. The inferred quantities, T(x, y, z, t) and bar v(x, y, z, t), are not intended to replace discrete point measurements (which can be obtained with substantially greater accuracy albeit with intrusive probes or added scattering particles). Rather, the time-resolved measurements will likely be very valuable for HVAC or micro-meteorological, etc measurements. The supporting theory and the respective literature base are succinctly presented. The experimental strategy, in which pairs of counter-propagating acoustic emitters/receivers criss-cross the measurement domain, is supported by the authors' form of an algebraic tomographic reconstruction technique. The demonstration experiment and representative results are clearly presented. The selection committee anticipates a positive response by those investigators whose application problem is compatible with the capabilities offered by this paper. 2011 Award Winner—Precision Measurement Diameter measurements of polystyrene particles with atomic force microscopy J Garnaes Danish Fundamental Metrology, Matematiktorvet 307, DK-2800 Kgs. Lyngby, Denmark This paper [5] describes a geometric diameter measurement of polystyrene spheres with nominal diameters of about 100 nm using atomic force microscopy (AFM). Although electron microscopy has conventionally been used for small diameter measurements, the method can only be used in vacuum, leading to significant changes in deformation as no meniscus of water is formed on the surface of the spheres placed in a vacuum. In this work, AFM is used for the height and distance measurements of the spheres placed on a mica substrate, allowing the measurement in air. Uncertainties in the diameter measurements have been evaluated in detail by taking into account influences of the deformations due to the AFM tip, substrate, surface tension effect of a thin water layer, interaction between the two spheres, and so on. The influence of air gaps introduced by imperfect packing of the spheres has also been evaluated quantitatively from the distribution of the measured diameters. Finally the geometric diameter of the polystyrene spheres has been determined with an uncertainty of 3 nm from the height and packing distance measurements. This paper has been downloaded more than 300 times since its publication. The selection committee members on the Precision Measurement Award, Dr K Fujii, Dr A Yacoot, Dr P Williams, Dr H Bosse, Professor X Chen and Dr T Eom, selected this paper from a strongly competitive list of ten candidates for its sophisticated idea and detailed evaluation of uncertainty in measurement. Considering its impact on accurate evaluation of particles using AFM, the paper was selected as the winner of the MST Precision Measurement Award for 2011. The chairmen would like to thank the authors for choosing to publish their work in Measurement Science and Technology, and hope that other researchers enjoy reading these works and feel encouraged to submit their own best work to the journal. References [1] Lübbe J, Tröger L, Torbrügge S, Bechstein R, Richter C, Kühnle A and Reichling M 2010 Achieving high effective Q-factors in ultra-high vacuum dynamic force microscopy Meas. Sci. Technol. 21 125501 (9pp) [2] Oishi M, Kinoshita H, Fujii T and Oshima M 2011 Simultaneous measurement of internal and surrounding flows of a moving droplet using multicolour confocal micro-particle image velocimetry (micro-PIV) Meas. Sci. Technol. 22 105401 (13pp) [3] Oishi M, Utsubo K, Kinoshita H, Fujii T and Oshima M 2012 Continuous and simultaneous measurement of the tank-treading motion of red blood cells and the surrounding flow using translational confocal micro-particle image velocimetry (micro-PIV) with sub-micron resolution Meas. Sci. Technol. 23 035301 (18pp) [4] Barth M and Raabe A 2011 Acoustic tomographic imaging of temperature and flow fields in air Meas. Sci. Technol. 22 035102 (13pp) [5] Garnaes J 2011 Diameter measurements of polystyrene particles with atomic force microscopy Meas. Sci. Technol. 22 094001 (8pp)
Current profile redistribution driven by neutral beam injection in a reversed-field pinch

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parke, E.; Department of Physics, University of Wisconsin-Madison 1150 University Ave., Madison, Wisconsin 53706; Anderson, J. K.

2016-05-15

Neutral beam injection in reversed-field pinch (RFP) plasmas on the Madison Symmetric Torus [Dexter et al., Fusion Sci. Technol. 19, 131 (1991)] drives current redistribution with increased on-axis current density but negligible net current drive. Internal fluctuations correlated with tearing modes are observed on multiple diagnostics; the behavior of tearing mode correlated structures is consistent with flattening of the safety factor profile. The first application of a parametrized model for island flattening to temperature fluctuations in an RFP allows inferrence of rational surface locations for multiple tearing modes. The m = 1, n = 6 mode is observed to shift inward by 1.1 ± 0.6 cm withmore » neutral beam injection. Tearing mode rational surface measurements provide a strong constraint for equilibrium reconstruction, with an estimated reduction of q{sub 0} by 5% and an increase in on-axis current density of 8% ± 5%. The inferred on-axis current drive is consistent with estimates of fast ion density using TRANSP [Goldston et al., J. Comput. Phys. 43, 61 (1981)].« less
Detection of concealed explosives at stand-off distances using wide band swept millimetre waves

NASA Astrophysics Data System (ADS)

Andrews, David A.; Rezgui, Nacer D.; Smith, Sarah E.; Bowring, Nicholas; Southgate, Matthew; Baker, John G.

2008-10-01

Millimetre waves in the range 20 to 110 GHz have been used to detect the presence and thickness of dielectric materials, such as explosives, by measuring the frequency response of the return signal. Interference between the reflected signals from the front and back surfaces of the dielectric provides a characteristic frequency variation in the return signal, which may be processed to yield its optical depth [Bowring et al, Meas. Sci. Technol. 19, 024004 (2008)]. The depth resolution depends on the sweep bandwidth, which is typically 10 to 30 GHz. By using super-heterodyne detection the range of the object can also be determined, which enables a signal from a target, such as a suicide bomber to be extracted from background clutter. Using millimetre wave optics only a small area of the target is illuminated at a time, thus reducing interference from different parts of a human target. Results are presented for simulated explosive materials with water or human backing at stand-off distances. A method of data analysis that involves pattern recognition enables effective differentiation of target types.
PUBLISHER'S ANNOUNCEMENT: Important changes for 2008

NASA Astrophysics Data System (ADS)

Bedrock, Claire

2008-01-01

Having reviewed several aspects of IOP journal content, both in print and online, we have made some changes for 2008, some of which affect Semiconductor Science and Technology. Article numbering In common with many other IOP journals, Semiconductor Science and Technology has moved from sequential page numbering to an article numbering system. Articles will continue to be published on the web in advance of the print edition. The bibliographic citation will change slightly. Articles should be referenced using the six-digit article number in place of a page number, and this number must include any leading zeros. For instance: Surname X and Surname Y 2008 Semicond. Sci. Technol. 18 015003 A new look and feel Semiconductor Science and Technology has changed from European A4 format to a slightly smaller size, closer to US Letter format, and we have taken the opportunity to refresh the cover, in order to modernise the typography, and create a consistent look and feel across our range of publications. If you have any questions or comments about any of these changes, please contact us at sst@iop.org
Resistive sensitivity functions for van der Pauw astroid and rounded crosses and cloverleafs

NASA Astrophysics Data System (ADS)

Koon, Daniel; Hansen, Ole

2014-03-01

We have calculated the sensitivity of van der Pauw resistances to local resistive variations for circular, square and astroid discs of infinitesimal thickness, as well as for the families of rounded crosses and cloverleafs, as a function of specimen parameters, using the direct formulas of our recent paper (Koon et al. 2013 J. Appl. Phys.114 163710) applied to ``reciprocally dual geometries'' (swapped Dirichlet and Neumann boundary conditions) described by Mareš et al.(2012 Meas. Sci. Technol. 23 045004). These results show that (a) the product of any such sensitivity function times differential area, and thus (b) the ratio of any two sensitivities, is invariant under conformal mapping, allowing for the pointwise determination of the conformal mapping function. The family of rounded crosses, which is bounded in parameter space by the square, the astroid and an ``infinitesimally thin'' cross, seems to represent the best geometry for focusing transport measurements on the center of the specimen while minimizing errors due to edge- or contact-effects. Made possible by an SLU Faculty research grant.
Theory of electron g-tensor in bulk and quantum-well semiconductors

NASA Astrophysics Data System (ADS)

Lau, Wayne H.; Flatte', Michael E.

2004-03-01

We present quantitative calculations for the electron g-tensors in bulk and quantum-well semiconductors based on a generalized P.p envelope function theory solved in a fourteen-band restricted basis set. The dependences of g-tensor on structure, magnetic field, carrier density, temperature, and spin polarization have been explored and will be described. It is found that at temperatures of a few Kelvin and fields of a few Tesla, the g-tensors for bulk semiconductors develop quasi-steplike dependences on carrier density or magnetic field due to magnetic quantization, and this effect is even more pronounced in quantum-well semiconductors due to the additional electric quantization along the growth direction. The influence of quantum confinement on the electron g-tensors in QWs is studied by examining the dependence of electron g-tensors on well width. Excellent agreement between these calculated electron g-tensors and measurements [1-2] is found for GaAs/AlGaAs QWs. This work was supported by DARPA/ARO. [1] A. Malinowski and R. T. Harley, Phys. Rev. B 62, 2051 (2000);[2] Le Jeune et al., Semicond. Sci. Technol. 12, 380 (1997).

Electron Cyclotron Resonance (ECR) Ion Source Development at the Holified Radioactive Ion Beam Facility

NASA Astrophysics Data System (ADS)

Bilheux, Hassina; Liu, Yuan; Alton, Gerald; Cole, John; Williams, Cecil; Reed, Charles

2004-11-01

Performance of ECR ion sources can be significantly enhanced by increasing the physical size of their ECR zones in relation to the size of their plasma volumes (spatial and frequency domain methods).^3-5 A 6 GHz, all-permanent magnet ECR ion source with a large resonant plasma volume has been tested at ORNL.^6 The magnetic circuit can be configured for creating both flat-β (volume) and conventional minimum-β (surface) resonance conditions. Direct comparisons of the performance of the two source types can be made under similar operating conditions. In this paper, we clearly demonstrate that the flat-β source outperforms its minimum-β counterpart in terms of charge state distribution and intensity within a particular charge state. ^1bilheuxhn@ornl.gov ^2Managed by UT-Battelle, LLC, for the U.S. Department of Energy under contract DE-AC05-00OR22725. ^3G.D. Alton, D.N. Smithe, Rev. Sci. Instrum. 65 (1994) 775. ^4G.D. Alton et al., Rev. Sci. Instrum. 69 (1998) 2305. ^5Z.Q. Xie, C.M. Lyneis, Rev. Sci. Instrum. 66 (1995) 4218. ^6Y. Liu et al., Rev. Sci. Instrum. 69 (1998) 1311.
Characterizing Fluorocarbon Assisted Atomic Layer Etching of Si Using Cyclic Ar/C 4F 8 and Ar/CHF 3 Plasma

DOE PAGES

Metzler, Dominik; Li, Chen; Engelmann, Sebastian; ...

2016-09-08

With the increasing interest in establishing directional etching methods capable of atomic scale resolution for fabricating highly scaled electronic devices, the need for development and characterization of atomic layer etching (ALE) processes, or generally etch processes with atomic layer precision, is growing. In this work, a flux-controlled cyclic plasma process is used for etching of SiO 2 and Si at the Angstrom-level. This is based on steady-state Ar plasma, with periodic, precise injection of a fluorocarbon (FC) precursor (C 4F 8 and CHF 3), and synchronized, plasma-based Ar+ ion bombardment [D. Metzler et al., J Vac Sci Technol A 32,more » 020603 (2014), and D. Metzler et al., J Vac Sci Technol A 34, 01B101 (2016)]. For low energy Ar+ ion bombardment conditions, physical sputter rates are minimized, whereas material can be etched when FC reactants are present at the surface. This cyclic approach offers a large parameter space for process optimization. Etch depth per cycle, removal rates, and self-limitation of removal, along with material dependence of these aspects, were examined as a function of FC surface coverage, ion energy, and etch step length using in situ real time ellipsometry. The deposited FC thickness per cycle is found to have a strong impact on etch depth per cycle of SiO 2 and Si, but is limited with regard to control over material etching selectivity. Ion energy over the 20 to 30 eV range strongly impacts material selectivity. The choice of precursor can have a significant impact on the surface chemistry and chemically enhanced etching. CHF 3 has a lower FC deposition yield for both SiO 2 and Si, and also exhibits a strong substrate dependence of FC deposition yield, in contrast to C4F 8. The thickness of deposited FC layers using CHF 3 is found to be greater for Si than for SiO 2. X-ray photoelectron spectroscopy was used to study surface chemistry. When thicker FC films of 11 Å are employed, strong changes of FC film chemistry during a cycle are seen whereas the chemical state of the substrate varies much less. On the other hand, for FC film deposition of 5 Å for each cycle, strong substrate surface chemical changes are seen during an etching cycle. The nature of this cyclic etching with periodic deposition of thin FC films differs significantly from conventional etching with steady-state FC layers since surface conditions change strongly throughout each cycle.« less
Examining the relationship between mercury and organic matter in lake sediments along a latitudinal transect in subarctic Canada

NASA Astrophysics Data System (ADS)

Galloway, Jennifer M.; Sanei, Hamed; Parsons, Michael; Swindles, Graeme T.; Macumber, Andrew L.; Patterson, R. Timothy; Palmer, Michael; Falck, Hendrik

2016-04-01

The accumulation of Hg in aquatic environments at both high and low latitudes can be controlled by organic matter through algal scavenging, thus complicating the interpretation of historical Hg profiles in lake sediments1,2,3. However, other recent studies suggest that algal scavenging is not important in governing Hg flux to sediments4, in some cases because of dilution by inorganic materials5. This study examines relationships between Hg and organic matter (OM) in over 100 lakes located between 60.5 and 65.4 °N and crossing the latitudinal tree-line in subarctic Canada. The latitudinal gradient approach in our study offers an opportunity to better understand climate and environmental controls on OM accumulation and its role in influencing Hg deposition in subarctic lacustrine environments. We used Rock Eval 6 pyrolysis to determine total organic carbon (TOC%), S1 (soluble OM consisting of degradable lipids and algal pigments), S2 (OM derived from highly aliphatic biomacromolecule structure of algal cell walls), and S3 (OM dominated by carbohydrates, lignins, and plant materials). Total Hg in sediments was measured using thermal decomposition, amalgamation, and atomic absorption spectrophotometry. In these lake sediments, S2 composes the majority of TOC (Pearson's r = 0.978, p<0.01) and is negatively correlated with latitude (r = -0.475, p<0.01). S1 and TOC are also negatively correlated with latitude (r = -0.237 and -0.452, respectively, p<0.01). These associations are interpreted to reflect less autochthonous OM production and proportionally higher allochthonous OM input to more northern lakes (oxygen index vs. latitude r = 0.371, p<0.01). Similar to previous studies1,2,3 Mercury displays a significant positive association with S1 (r = 0.556, p<0.01), S2 (r = 0.518, p<0.01), and TOC (r = 0.504, p<0.01),supporting the hypothesis that OM influences Hg accumulation in subarctic lake sediments. References 1Sanei, H., Goodarzi, F. 2006. Relationship between organic matter and mercury in recent lake sediment: the physical-geochemical aspects. Appl Geochem 21: 1900-12. 2Outridge, P.M., Sanei, H., Stern, G.A., Hamilton, P.B., Goodarzi, F. 2007. Evidence for control of mercury accumulation rates in Canadian high Arctic lake sediments by variations of aquatic primary productivity. Environ Sci Technol 41: 5259-65. 3Wu, F., Zu, L., Liao, H., Guo, F., Zhao, X., Giesy, J. 2013. Relationship between mercury and organic carbon in sediment cores from Lakes Qinghai and Chenghai, China. J Soils Sediments 13: 1084-1092.4Kirk, J.L., Muir, D.C.G., Antoniades, D., Douglas, M.S.V., Evans, M.S., Jackson, T.A., Kling, H., Lamoureux, S., Lim, D.S.S., Pienitz, R., Smol, J.P., Stewart, K., Wang, X., Yang, F. 2011. Response to comment on climate change and mercury accumulation in Canadian high and subarctic lakes. Environ Sci Technol 45: 6705-06.5Deison, R., Smol, J.P., Kokelj, S.V., Pisaric, M.F.J., Kimpe, L.E., Poulain, A.J., Sanei, H., Theinpoint, J.R., Blais, J.M. 2012. Spatial and temporal assessment of mercury and organic matter in thermokarst affected lakes of the Mackenzie Delta Uplands, NT, Canada. Environ Sci Tech 46: 8748-55.
SCI Hazard Report Methodology

NASA Technical Reports Server (NTRS)

Mitchell, Michael S.

2010-01-01

This slide presentation reviews the methodology in creating a Source Control Item (SCI) Hazard Report (HR). The SCI HR provides a system safety risk assessment for the following Ares I Upper Stage Production Contract (USPC) components (1) Pyro Separation Systems (2) Main Propulsion System (3) Reaction and Roll Control Systems (4) Thrust Vector Control System and (5) Ullage Settling Motor System components.
Photoenhanced uptakes of NO2 by indoor surfaces: A new HONO source

NASA Astrophysics Data System (ADS)

Gligorovski, S.; Bartolomei, V.; Soergel, M.; Gomez Alvarez, E.; Zetzsch, C.; Wortham, H.

2012-12-01

Nitrous acid (HONO) is a known household pollutant that can lead to human respiratory tract irritation. HONO acts as the nitrosating agent, e.g. by the formation of the so-called third-hand smoke after wall reactions of HONO with nicotine (1). HONO can be generated indoors directly during combustion processes or indirectly via heterogeneous NO2 reactions with adsorbed water on diverse surfaces (2). Recently a new source was identified as another path of HONO formation in the troposphere (3). Namely, the light-induced heterogeneous reaction of NO2 with adsorbed organics (known as photosensitizers) on various surfaces such as roads, buildings, rocks or plants leads to enhanced HONO production. The detected values of HONO indoors vary in the range between 2 and 25 parts per billion (ppb). However, like outdoors, the processes leading to HONO formation indoors are not completely understood (4). Indoor photolysis radiation sources include exterior sunlight (λ>350 nm) that enters typically through the windows and indoor illumination sources, i.e., rare gas/mercury fluorescent light bulbs and tungsten and tungsten/halogen light bulbs among others. The present work is showing the importance of indoor sources of HONO recently identified or postulated. We have tested a number of common household chemical agents commonly used for cleaning purposes or coatings of domestic surfaces to better identify different indoor HONO sources. We used a heterogeneous flow tube technique to test the HONO production potentials of these household chemical agents under different experimental conditions, namely with and without light and at different relative humidity levels and different NO2 concentrations. We report uptake kinetics measurements of the heterogeneous reaction of gas phase NO2 with lacquer and paint coated on the walls of the reactor. The flow tube was irradiated with four near-ultraviolet (UV) emitting lamps (range of wavelengths 300-420nm). We observed that the heterogeneous conversion of NO2 to HONO on lacquer surfaces and on white wall paints is substantially enhanced in the presence of light and at higher relative humidity (RH = 60%). In runs carried out applying experimental conditions typically found indoors, i.e., NO2 mixing ratios of 25 ppb and 60% RH%, the observed NO2 uptakes on a surface coated with lacquer and paint showed an enhancement of one order of magnitude in the presence of light as compared to the uptake observed in the dark. Our results indicate, contrary to other study that claimed that humidity does not influence the NO2 reactions with adsorbed organics, that actually both postulated HONO sources combined i.e. heterogeneous NO2 reactions with adsorbed organics (photosensitizers) in presence of elevated humidity leads to even more pronounced HONO production. Reference: 1. M., Sleiman, L. A., Gundel, J. F., Pankow, P., Jacob, B. C., Singer, H., Destaillats, P. Natl. Acad. Sci. USA, 107, 6576 (2010). 2. B. J. Finlayson-Pitts, L. M. Wingen, A. L. Sumner, D. Syomin, K. A. Ramazan, Phys. Chem. Chem. Phys. 5, 223 (2003). 3. K., Stemmler, M., Ammann, C., Donders, J., Kleffmann, C., George, Nature 440, 195 (2006). 4. E. Gomez Alvarez, H. Wortham, R. Strekowski, C. Zetzsch, S. Gligorovski, Environ. Sci. Technol., 46, 1955 (2012).
Nonlinear Polarization Conversion using Microring Resonators

DTIC Science & Technology

2007-06-08

Office MURI grant W911NF-04-01-0203. References 1. B. E. Little and S. T. Chu, Opt. Photon. News 11(11), 24 (2000). 2. G. Griffel , IEEE Photon. Technol...Thompson Learning, 1976). 15. S. J. Choi, K. Djordjev, S. J. Choi, P. D. Dapkus, W. Lin, G. Griffel , R. Menna, and J. Connoly, IEEE Photon. Technol. Lett
Toward Understanding the Nature of a Partnership Between an Elementary Classroom Teacher and an Informal Science Educator

NASA Astrophysics Data System (ADS)

Weiland, Ingrid S.; Akerson, Valarie L.

2013-12-01

This study explored the nature of the relationship between a fifth-grade teacher and an informal science educator as they planned and implemented a life science unit in the classroom, and sought to define this relationship in order to gain insight into the roles of each educator. In addition, student learning as a result of instruction was assessed. Prior research has predominately examined relationships and roles of groups of teachers and informal educators in the museum setting (Tal et al. in Sci Educ 89:920-935, 2005; Tal and Steiner in Can J Sci Math Technol Educ 6:25-46, 2006; Tran 2007). The current study utilized case study methodology to examine one relationship (between two educators) in more depth and in a different setting—an elementary classroom. The relationship was defined through a framework of cooperation, coordination, and collaboration (Buck 1998; Intriligator 1986, 1992) containing eight dimensions. Findings suggest a relationship of coordination, which requires moderate commitment, risk, negotiation, and involvement, and examined the roles that each educator played and how they negotiated these roles. Consistent with previous examinations in science education of educator roles, the informal educator's role was to provide the students with expertise and resources not readily available to them. The roles played by the classroom teacher included classroom management, making connections to classroom activities and curricula, and clarifying concepts. Both educators' perceptions suggested they were at ease with their roles and that they felt these roles were critical to the optimization of the short time frames (1 h) the informal educator was in the classroom. Pre and posttest tests demonstrated students learned as a result of the programs.
Analytical investigation of microwave resonances of a curling probe for low and high-pressure plasma diagnostics

NASA Astrophysics Data System (ADS)

Arshadi, Ali; Brinkmann, Ralf Peter

2017-01-01

The concept of ‘active plasma resonance spectroscopy’ (APRS) has attracted greater interest in recent years as an established plasma diagnostic technique. The APRS describes a class of related methods utilizing the intrinsic ability of plasma to resonate at or near the electron plasma frequency {ω\\text{pe}} . The Curling probe (CP) as a novel realization of the APRS idea, is a miniaturized spiral slot embedded flatly in the chamber wall. Consequently, a plasma diagnostic technique with minimum disturbance and without metal contamination can be developed. To measure the plasma parameters the CP is fed with a weak frequency-swept signal from the exterior of the plasma chamber by a network analyzer which also records the response of the plasma versus the frequency. The resonance behavior is strongly dependent on the electron density and the gas pressure. The CP has also the advantage of resonating at a frequency greater than {ω\\text{pe}} which is dependent on the spiral’s length. The double resonance characteristic gives the CP the ability to be applied in varying plasma regimes. Assuming that the spiralization does not have a considerable effect on the resonances, a ‘straightened’ infinite length CP has recently been investigated (Arshadi and Brinkmann 2016 Plasma Sources Sci. Technol. 25 045014) to obtain the surface wave resonances. This work generalizes the approach and models the CP by a rectangular slot-type resonator located between plasma and quartz. Cold plasma theory and Maxwell’s equations are utilized to compute the electromagnetic fields propagating into the plasma by the diffraction of an incident plane wave at the slot. A mathematical model is employed and both kinds of resonances are derived. The analytical study of this paper shows good agreement with the numerical results of the probe inventors.
Selective Vulnerability of Cortical Border Zone to Microembolic Infarct.

PubMed

Bergui, Mauro; Castagno, Davide; D'Agata, Federico; Cicerale, Alessandro; Anselmino, Matteo; Maria Ferrio, Federica; Giustetto, Carla; Halimi, Franck; Scaglione, Marco; Gaita, Fiorenzo

2015-07-01

Endovascular procedures, including atrial fibrillation transcatheter ablation, may cause microembolization of brain arteries. Microemboli often cause small sized and clinically silent cerebral ischemias (SCI). These lesions are clearly visible on early postoperative magnetic resonance diffusion-weighted images. We analyzed SCI distribution in a population of patients submitted to atrial fibrillation transcatheter ablation. Seventy-eight of 927 consecutive patients submitted to atrial fibrillation transcatheter ablation were found positive for acute SCI on a postoperative magnetic resonance. SCI were identified and marked, and their coordinates were transformed from native space into the International Consortium for Brain Mapping/Montreal Neurological Institute space. We then computed the voxel-wise probability distribution map of the SCI using the activation likelihood estimation approach. SCI were more commonly found in the cortex. In supratentorial regions, SCI selectively involved cortical border zone between anterior, middle, and posterior cerebral arteries; in infratentorial regions, distal territory of posteroinferior cerebellar artery. Possible explanations include selective embolization, linked to the vascular anatomy of pial arteries supplying those territories, reduced clearance of emboli in a relatively hypoperfused zone, or a combination of both. This particular distribution of lesions has been reported in both animal models and in patients with microemboli of different sources. A selective vulnerability of cortical border zone to microemboli occurring during atrial fibrillation transcatheter ablation was observed. We hypothesize that such selectivity may apply to microemboli of different sources. © 2015 American Heart Association, Inc.
Combustion Processes Indoors: a Source of High OH Radical Concentrations Through the Photolysis of Hono

NASA Astrophysics Data System (ADS)

Bartolomei, V.; Gomez Alvarez, E.; Glor, M.; Gligorovski, S.; Temime-Roussel, B.; Quivet, E.; Strekowski, R.; Zetzsch, C.; Held, A. B.; Wortham, H.

2013-12-01

Hydroxyl radical (OH) is one of the most important oxidant species in the atmosphere controlling its self-oxidizing capacity. The main sources of OH radicals are photolysis of ozone and photolysis of nitrous acid (HONO), among the others. In the indoor air, the ozonolysis of alkenes has been suggested as the main OH formation pathway. The possibility for OH formation through photolytic pathways in the indoor environment has been, up to now, ignored (Gómez Alvarez et al., 2012). Models and indirect measurements to the present time predicted concentrations of OH radicals in the order of 104 -105 cm-3. Recently, by direct measurements we have detected high OH radical concentrations of 1.8 106 cm-3 in a classroom in Marseille and we demonstrated that its main source is the photolysis of HONO (Gómez Alvarez et al., 2013). The concentrations of HONO are quite high indoors, reaching levels in the order of a few tens of ppbV (Gómez Alvarez et al., 2013). This is mainly due to 1) direct combustion sources and 2) heterogeneous reactions of NO2 on the numerous surfaces present in the indoor environment. HONO levels of 30 ppb were measured in a previous campaign carried out in Bayreuth in July 2012 as direct emissions from the combustion of a candle. The combination between so high concentrations of HONO and higher than expected light transmissions indoors (or indoor artificial lighting) could have a significant impact on the OH concentrations indoors which could feasibly become considerably higher than we measured in our school campaign (Gomez Alvarez et al., 2013). In order to evaluate these upper limits under combustion conditions in the indoor environment, we have carried out a campaign in the LOTASC chamber (Bayreuth, Germany). For this aim, the exhaust fumes from the burning of a commonly used domestic candle have been introduced in the chamber. The chamber was irradiated under well research indoor lighting conditions. A thorough characterization of light intensities and span (wavelength distribution) indoors have been performed, which had been identified as a clear flaw in our knowledge restricting the advancement of indoor air quality models. OH concentration levels have been determined using d9-butanol as tracer, using the OH clock determination procedure by PTR-MS-TOF. The OH radical concentration was investigated using different light intensities representative from indoor conditions, both natural and artificial and also different levels of RH. The PSS model has been performed in order to evaluate the contribution of different sources to the OH radical concentrations indoors under these conditions. The obtained results from the PSS model clearly indicate that the main source of OH radical indoors under combustion conditions is the photolysis of HONO under typical indoor irradiation conditions. REFERENCES Gómez Alvarez E, Wortham H, Strekowski R, Zetzsch C, Gligorovski S (2012) Atmospheric photo-sensitized heterogeneous and multiphase reactions: From outdoors to indoors, Environ. Sci. Technol. 46, 1955-1963. Gómez Alvarez, E.; Amedro, D.; Afif, C. ; Gligorovski, S.; Schoemacker , C.; Fittschen, C. ; Doussin, J. F.; Wortham, H. (2013) Unexpectedly high indoor hydroxyl radical concentrations associated with nitrous acid. Proc. Natl. Acad. Sci. USA Accepted.
Life cycle assessment of automobile/fuel options.

PubMed

MacLean, Heather L; Lave, Lester B

2003-12-01

We examine the possibilities for a "greener" car that would use less material and fuel, be less polluting, and would have a well-managed end-of-life. Light-duty vehicles are fundamental to our economy and will continue to be for the indefinite future. Any redesign to make these vehicles greener requires consumer acceptance. Consumer desires for large, powerful vehicles have been the major stumbling block in achieving a "green car". The other major barrier is inherent contradictions among social goals such as fuel economy, safety, low emissions of pollutants, and low emissions of greenhouse gases, which has led to conflicting regulations such as emissions regulations blocking sales of direct injection diesels in California, which would save fuel. In evaluating fuel/vehicle options with the potential to improve the greenness of cars [diesel (direct injection) and ethanol in internal combustion engines, battery-powered, gasoline hybrid electric, and hydrogen fuel cells], we find no option dominates the others on all dimensions. The principles of green design developed by Anastas and Zimmerman (Environ. Sci. Technol. 2003, 37, 94A-101A) and the use of a life cycle approach provide insights on the key sustainability issues associated with the various options.
Electrostatic turbulence intermittence driven by biasing in Texas Helimak

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toufen, D. L.; Institute of Physics, University of São Paulo, 05315-970 São Paulo, São Paulo; Pereira, F. A. C.

We investigate changes in the intermittent sequence of bursts in the electrostatic turbulence due to imposed positive bias voltage applied to control the plasma radial electric field in Texas Helimak [K. W. Gentle and H. He, Plasma Sci. Technol. 10, 284 (2008)]—a toroidal plasma device with a one-dimensional equilibrium, magnetic curvature, and shear. We identify the burst characteristics by analyzing ion saturation current fluctuations collected in a large set of Langmuir probes. The number of bursts increase with positive biasing, giving rise to a long tailed skewed turbulence probability distribution function. The burst shape does not change much with themore » applied bias voltage, while their vertical velocity increases monotonically. For high values of bias voltage, the bursts propagate mainly in the vertical direction which is perpendicular to the radial density gradient and the toroidal magnetic field. Moreover, in contrast with the bursts in tokamaks, the burst velocity agrees with the phase velocity of the overall turbulence in both vertical and radial directions. For a fixed bias voltage, the time interval between bursts and their amplitudes follows exponential distributions. Altogether, these burst characteristics indicate that their production can be modelled by a stochastic process.« less
Numerical study of multiscale compaction-initiated detonation

NASA Astrophysics Data System (ADS)

Gambino, J. R.; Schwendeman, D. W.; Kapila, A. K.

2018-02-01

A multiscale model of heterogeneous condensed-phase explosives is examined computationally to determine the course of transient events following the application of a piston-driven stimulus. The model is a modified version of that introduced by Gonthier (Combust Sci Technol 175(9):1679-1709, 2003. https://doi.org/10.1080/00102200302373) in which the explosive is treated as a porous, compacting medium at the macro-scale and a collection of closely packed spherical grains capable of undergoing reaction and diffusive heat transfer at the meso-scale. A separate continuum description is ascribed to each scale, and the two scales are coupled together in an energetically consistent manner. Following piston-induced compaction, localized energy deposition at the sites of intergranular contact creates hot spots where reaction begins preferentially. Reaction progress at the macro-scale is determined by the spatial average of that at the grain scale. A parametric study shows that combustion at the macro-scale produces an unsteady detonation with a cyclical character, in which the lead shock loses strength and is overtaken by a stronger secondary shock generated in the partially reacted material behind it. The secondary shock in turn becomes the new lead shock and the process repeats itself.
Instability analysis of charges trapped in the oxide of metal-ultra thin oxide-semiconductor structures

NASA Astrophysics Data System (ADS)

Aziz, A.; Kassmi, K.; Maimouni, R.; Olivié, F.; Sarrabayrouse, G.; Martinez, A.

2005-09-01

In this paper, we present the theoretical and experimental results of the influence of a charge trapped in ultra-thin oxide of metal/ultra-thin oxide/semiconductor structures (MOS) on the I(Vg) current-voltage characteristics when the conduction is of the Fowler-Nordheim (FN) tunneling type. The charge, which is negative, is trapped near the cathode (metal/oxide interface) after constant current injection by the metal (Vg<0). Of particular interest is the influence on the Δ Vg(Vg) shift over the whole I(Vg) characteristic at high field (greater than the injection field (>12.5 MV/cm)). It is shown that the charge centroid varies linearly with respect to the voltage Vg. The behavior at low field (<12.5 MV/cm) is analyzed in référence A. Aziz, K. Kassmi, Ka. Kassmi, F. Olivié, Semicond. Sci. Technol. 19, 877 (2004) and considers that the trapped charge centroid is fixed. The results obtained make it possible to analyze the influence of the injected charge and the applied field on the centroid position of the trapped charge, and to highlight the charge instability in the ultra-thin oxide of MOS structures.
Impact of Propene on Secondary Organic Aerosol Formation from m-Xylene

DOE Office of Scientific and Technical Information (OSTI.GOV)

Song, Chen; Na, Kwangsam; Warren, Bethany

2007-10-15

Propene is widely used in smog chamber experiments to increase the hydroxyl radical (OH) level based on the assumption that the formation of secondary organic aerosol (SOA) from parent hydrocarbon is unaffected. A series ofm-xylene/NOx photooxidation experiments were conducted in the presence of propene in the University of California CECERT atmospheric chamber facility. The experimental data are compared with previousm-xylene/NOx photooxidation work performed in the same chamber facility in the absence of propene (Song et al. Environ. Sci. Technol. 2005, 39, 3143-3149). The result shows that, for similar initial conditions, experiments with propene have lower reaction rates of m-xylene thanmore » those without propene, which indicates that propene reduces OH in the system. Furthermore, experiments with propene showed more than 15% reduction in SOA yield compared to experiments in the absence of propene. Additional experiments ofm-xylene/NOx with CO showed similar trends of suppressing OH and SOA formation. These results indicate that SOA from m-xylene/NOx photooxidation is strongly dependent on the OH level present, which provides evidence for the critical role of OH in SOA formation from aromatic hydrocarbons.« less
Improved Kolsky tension bar for high-rate tensile characterization of materials

NASA Astrophysics Data System (ADS)

Song, Bo; Antoun, Bonnie R.; Connelly, Kevin; Korellis, John; Lu, Wei-Yang

2011-04-01

A new Kolsky tension bar has been re-designed and developed at Sandia National Laboratories, CA. The new design uses the concept that a solid striker is fired to impact an end cap attached to the open end of the gun barrel to generate dynamic tensile loading. The gun barrel here serves as part of the loading device. The incident bar that is connected to the gun barrel and the transmission bar follow the design similar to the Kolsky compression bar. The bar supporting and aligning systems are the same as those in the Kolsky compression bar design described by Song et al (2009 Meas. Sci. Technol. 20 115701). Due to the connection complication among the gun barrel, bars and specimen, stress-wave propagation in the new Kolsky tension bar system is comprehensively analyzed. Based on the stress-wave analysis, the strain gage location on the incident bar needs to be carefully determined. A highly precise laser-beam measurement system is recommended to directly measure the displacement of the incident bar end. Dynamic tensile characterization of a 4330-V steel using this new Kolsky tension bar is presented as an example.
A new approach to the inverse problem for current mapping in thin-film superconductors

NASA Astrophysics Data System (ADS)

Zuber, J. W.; Wells, F. S.; Fedoseev, S. A.; Johansen, T. H.; Rosenfeld, A. B.; Pan, A. V.

2018-03-01

A novel mathematical approach has been developed to complete the inversion of the Biot-Savart law in one- and two-dimensional cases from measurements of the perpendicular component of the magnetic field using the well-developed Magneto-Optical Imaging technique. Our approach, especially in the 2D case, is provided in great detail to allow a straightforward implementation as opposed to those found in the literature. Our new approach also refines our previous results for the 1D case [Johansen et al., Phys. Rev. B 54, 16264 (1996)], and streamlines the method developed by Jooss et al. [Physica C 299, 215 (1998)] deemed as the most accurate if compared to that of Roth et al. [J. Appl. Phys. 65, 361 (1989)]. We also verify and streamline the iterative technique, which was developed following Laviano et al. [Supercond. Sci. Technol. 16, 71 (2002)] to account for in-plane magnetic fields caused by the bending of the applied magnetic field due to the demagnetising effect. After testing on magneto-optical images of a high quality YBa2Cu3O7 superconducting thin film, we show that the procedure employed is effective.
Comprehensive evaluation of the linear stability of Alfvén eigenmodes driven by alpha particles in an ITER baseline scenario

NASA Astrophysics Data System (ADS)

Figueiredo, A. C. A.; Rodrigues, P.; Borba, D.; Coelho, R.; Fazendeiro, L.; Ferreira, J.; Loureiro, N. F.; Nabais, F.; Pinches, S. D.; Polevoi, A. R.; Sharapov, S. E.

2016-07-01

The linear stability of Alfvén eigenmodes in the presence of fusion-born alpha particles is thoroughly assessed for two variants of an ITER baseline scenario, which differ significantly in their core and pedestal temperatures. A systematic approach based on CASTOR-K (Borba and Kerner 1999 J. Comput. Phys. 153 101; Nabais et al 2015 Plasma Sci. Technol. 17 89) is used that considers all possible eigenmodes for a given magnetic equilibrium and determines their growth rates due to alpha-particle drive and Landau damping on fuel ions, helium ashes and electrons. It is found that the fastest growing instabilities in the aforementioned ITER scenario are core-localized, low-shear toroidal Alfvén eigenmodes. The largest growth-rates occur in the scenario variant with higher core temperatures, which has the highest alpha-particle density and density gradient, for eigenmodes with toroidal mode numbers n≈ 30 . Although these eigenmodes suffer significant radiative damping, which is also evaluated, their growth rates remain larger than those of the most unstable eigenmodes found in the variant of the ITER baseline scenario with lower core temperatures, which have n≈ 15 and are not affected by radiative damping.
Scalable Earth-observation Analytics for Geoscientists: Spacetime Extensions to the Array Database SciDB

NASA Astrophysics Data System (ADS)

Appel, Marius; Lahn, Florian; Pebesma, Edzer; Buytaert, Wouter; Moulds, Simon

2016-04-01

Today's amount of freely available data requires scientists to spend large parts of their work on data management. This is especially true in environmental sciences when working with large remote sensing datasets, such as obtained from earth-observation satellites like the Sentinel fleet. Many frameworks like SpatialHadoop or Apache Spark address the scalability but target programmers rather than data analysts, and are not dedicated to imagery or array data. In this work, we use the open-source data management and analytics system SciDB to bring large earth-observation datasets closer to analysts. Its underlying data representation as multidimensional arrays fits naturally to earth-observation datasets, distributes storage and computational load over multiple instances by multidimensional chunking, and also enables efficient time-series based analyses, which is usually difficult using file- or tile-based approaches. Existing interfaces to R and Python furthermore allow for scalable analytics with relatively little learning effort. However, interfacing SciDB and file-based earth-observation datasets that come as tiled temporal snapshots requires a lot of manual bookkeeping during ingestion, and SciDB natively only supports loading data from CSV-like and custom binary formatted files, which currently limits its practical use in earth-observation analytics. To make it easier to work with large multi-temporal datasets in SciDB, we developed software tools that enrich SciDB with earth observation metadata and allow working with commonly used file formats: (i) the SciDB extension library scidb4geo simplifies working with spatiotemporal arrays by adding relevant metadata to the database and (ii) the Geospatial Data Abstraction Library (GDAL) driver implementation scidb4gdal allows to ingest and export remote sensing imagery from and to a large number of file formats. Using added metadata on temporal resolution and coverage, the GDAL driver supports time-based ingestion of imagery to existing multi-temporal SciDB arrays. While our SciDB plugin works directly in the database, the GDAL driver has been specifically developed using a minimum amount of external dependencies (i.e. CURL). Source code for both tools is available from github [1]. We present these tools in a case-study that demonstrates the ingestion of multi-temporal tiled earth-observation data to SciDB, followed by a time-series analysis using R and SciDBR. Through the exclusive use of open-source software, our approach supports reproducibility in scalable large-scale earth-observation analytics. In the future, these tools can be used in an automated way to let scientists only work on ready-to-use SciDB arrays to significantly reduce the data management workload for domain scientists. [1] https://github.com/mappl/scidb4geo} and \\url{https://github.com/mappl/scidb4gdal
SciReader enables reading of medical content with instantaneous definitions.

PubMed

Gradie, Patrick R; Litster, Megan; Thomas, Rinu; Vyas, Jay; Schiller, Martin R

2011-01-25

A major problem patients encounter when reading about health related issues is document interpretation, which limits reading comprehension and therefore negatively impacts health care. Currently, searching for medical definitions from an external source is time consuming, distracting, and negatively impacts reading comprehension and memory of the material. SciReader was built as a Java application with a Flex-based front-end client. The dictionary used by SciReader was built by consolidating data from several sources and generating new definitions with a standardized syntax. The application was evaluated by measuring the percentage of words defined in different documents. A survey was used to test the perceived effect of SciReader on reading time and comprehension. We present SciReader, a web-application that simplifies document interpretation by allowing users to instantaneously view medical, English, and scientific definitions as they read any document. This tool reveals the definitions of any selected word in a small frame at the top of the application. SciReader relies on a dictionary of ~750,000 unique Biomedical and English word definitions. Evaluation of the application shows that it maps ~98% of words in several different types of documents and that most users tested in a survey indicate that the application decreases reading time and increases comprehension. SciReader is a web application useful for reading medical and scientific documents. The program makes jargon-laden content more accessible to patients, educators, health care professionals, and the general public.

Tritium Decay Helium-3 Effects in Tungsten

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shimada, M.; Merrill, B. J.

2016-06-01

A critical challenge for long-term operation of ITER and beyond to a Demonstration reactor (DEMO) and future fusion reactor will be the development of plasma-facing components (PFCs) that demonstrate erosion resistance to steady-state/transient heat fluxes and intense neutral/ion particle fluxes under the extreme fusion nuclear environment, while at the same time minimizing in-vessel tritium inventories and permeation fluxes into the PFC’s coolant. Tritium will diffuse in bulk tungsten at elevated temperatures, and can be trapped in radiation-induced trap site (up to 1 at. % T/W) in tungsten [1,2]. Tritium decay into helium-3 may also play a major role in microstructuralmore » evolution (e.g. helium embrittlement) in tungsten due to relatively low helium-4 production (e.g. He/dpa ratio of 0.4-0.7 appm [3]) in tungsten. Tritium-decay helium-3 effect on tungsten is hardly understood, and its database is very limited. Two tungsten samples (99.99 at. % purity from A.L.M.T. Co., Japan) were exposed to high flux (ion flux of 1.0x1022 m-2s-1 and ion fluence of 1.0x1026 m-2) 0.5%T2/D2 plasma at two different temperatures (200, and 500°C) in Tritium Plasma Experiment (TPE) at Idaho National Laboratory. Tritium implanted samples were stored at ambient temperature in air for more than 3 years to investigate tritium decay helium-3 effect in tungsten. The tritium distributions on plasma-exposed was monitored by a tritium imaging plate technique during storage period [4]. Thermal desorption spectroscopy was performed with a ramp rate of 10°C/min up to 900°C to outgas residual deuterium and tritium but keep helium-3 in tungsten. These helium-3 implanted samples were exposed to deuterium plasma in TPE to investigate helium-3 effect on deuterium behavior in tungsten. The results show that tritium surface concentration in 200°C sample decreased to 30 %, but tritium surface concentration in 500°C sample did not alter over the 3 years storage period, indicating possible tritium retention in helium-3 bubble. This paper reports the initial experimental observation of tritium-decay helium-3 in tungsten exposed to deuterium/tritium plasma along with electron microscope analysis and also discusses a Tritium Migration Analysis Program (TMAP) analysis of tritium-decay helium-3 effects on tritium retention in tungsten for DEMO and future fusion reactor. [1] Y. Hatano, et.al., Nucl. Fusion 53 (2013) 073006 [2] M. Shimada, et.al., Nucl. Fusion 55 (2015) 013008 [3] M. Sawan, Fus. Sci. Technol. 66 (2014) 272 [4] T. Otsuka, Fus. Sci. Technol. 60 (2011) 1539 This work was prepared for the U.S. Department of Energy, Office of Fusion Energy Sciences, under the DOE Idaho Field Office contract number DE-AC07-05ID14517.« less
Sample-morphology effects on x-ray photoelectron peak intensities. III. Simulated spectra of model core–shell nanoparticles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Powell, Cedric J., E-mail: cedric.powell@nist.gov; Chudzicki, Maksymilian; Werner, Wolfgang S. M.

2015-09-15

The National Institute of Standards and Technology database for the simulation of electron spectra for surface analysis has been used to simulate Cu 2p photoelectron spectra for four types of spherical copper–gold nanoparticles (NPs). These simulations were made to extend the work of Tougaard [J. Vac. Sci. Technol. A 14, 1415 (1996)] and of Powell et al. [J. Vac. Sci. Technol. A 31, 021402 (2013)] who performed similar simulations for four types of planar copper–gold films. The Cu 2p spectra for the NPs were compared and contrasted with analogous results for the planar films and the effects of elastic scatteringmore » were investigated. The new simulations were made for a monolayer of three types of Cu/Au core–shell NPs on a Si substrate: (1) an Au shell of variable thickness on a Cu core with diameters of 0.5, 1.0, 2.0, 5.0, and 10.0 nm; (2) a Cu shell of variable thickness on an Au core with diameters of 0.5, 1.0, 2.0, 5.0, and 10.0 nm; and (3) an Au shell of variable thickness on a 1 nm Cu shell on an Au core with diameters of 0.5, 1.0, 2.0, 5.0, and 10.0 nm. For these three morphologies, the outer-shell thickness was varied until the Cu 2p{sub 3/2} peak intensity was the same (within 2%) as that found in our previous work with planar Cu/Au morphologies. The authors also performed similar simulations for a monolayer of spherical NPs consisting of a CuAu{sub x} alloy (also on a Si substrate) with diameters of 0.5, 1.0, 2.0, 5.0, and 10.0 nm. In the latter simulations, the relative Au concentration (x) was varied to give the same Cu 2p{sub 3/2} peak intensity (within 2%) as that found previously. For each morphology, the authors performed simulations with elastic scattering switched on and off. The authors found that elastic-scattering effects were generally strong for the Cu-core/Au-shell and weak for the Au-core/Cu-shell NPs; intermediate elastic-scattering effects were found for the Au-core/Cu-shell/Au-shell NPs. The shell thicknesses required to give the selected Cu 2p{sub 3/2} peak intensity for the three types of core–shell NPs were less than the corresponding film thicknesses of planar samples since Cu 2p photoelectrons can be detected from the sides and, for the smaller NPs, bottoms of the NPs. Elastic-scattering effects were also observed on the Au atomic fractions found for the CuAu{sub x} NP alloys with different diameters.« less
Reactions of SIV species with organic compounds: formation mechanisms of organo-sulfur derivatives in atmospheric aerosols

NASA Astrophysics Data System (ADS)

Passananti, Monica; Shang, Jing; Dupart, Yoan; Perrier, Sébastien; George, Christian

2015-04-01

Secondary organic aerosol (SOA) have an important impact on climate, air quality and human health. However the chemical reactions involved in their formation and growth are not fully understood or well-constrained in climate models. It is well known that inorganic sulfur (mainly in oxidation states (+IV) and (+VI)) plays a key role in aerosol formation, for instance sulfuric acid is known to be a good nucleating gas. In addition, acid-catalyzed heterogeneous reactions of organic compounds has shown to produce new particles, with a clear enhancement in the presence of ozone (Iinuma 2013). Organosulfates have been detected in tropospheric particles and aqueous phases, which suggests they are products of secondary organic aerosol formation process (Tolocka 2012). Originally, the production of organosulfates was explained by the esterification reaction of alcohols, but this reaction in atmosphere is kinetically negligible. Other formation pathways have been suggested such as hydrolysis of peroxides and reaction of organic matter with sulfite and sulfate radical anions (SO3-, SO4-) (Nozière 2010), but it remains unclear if these can completely explain atmospheric organo-sulfur aerosol loading. To better understand the formation of organo-sulfur compounds, we started to investigate the reactivity of SIV species (SO2 and SO32-) with respect to specific functional groups (organic acids and double bonds) on atmospherically relevant carboxylic acids and alkenes. The experiments were carried out in the homogeneous aqueous phase and at the solid-gas interface. A custom built coated-wall flow tube reactor was developed to control relativity humidity, SO2 concentration, temperature and gas flow rate. Homogeneous and heterogeneous reaction kinetics were measured and resulting products were identified using liquid chromatography coupled with an orbitrap mass spectrometer (LC-HR-MS). The experiments were performed with and without the presence of ozone in order to evaluate any impact on the SIV oxidation and product formation. Preliminary results reveal that oxidation of SIV species can occur under a variety of atmospherically relevant conditions. Furthermore, LC-HR-MS analysis confirms the formation of organo-sulfur compounds that could derive from sulfate and/or the sulfite radical anion. These results elucidate the role of organo-sulfates aqueous and interfacial chemistry, important for our scientific understanding of atmospheric SOA formation. Iinuma Y., Kahnt A., Mutzel A., Böge O., Herrmann H., Environ. Sci. Technol., 2013, (47), 3639-3647, DOI: 10.1021/es305156z. Mauldin III R. L., Berndt T., Sipilä M., Paasonen P., Petäjä T., Kim S., Kurtén T., Stratmann F., Kerminen V.-M., Kulmala M., Nature, 2012, (488), 193-196, DOI: 10.1038/nature11278. Nozière B., Ekström S., AlsbergT., Holmström S., Geophys. Res. Lett., 2010, (37), 1-6, DOI: 10.1029/2009GL041683. Tolocka M.P., Turpin B., Environ. Sci. Technol., 2012, (46), 7978-7983, DOI: 10.1021/es300651v.
Molecular Simulations of the Diffusion of Uranyl Carbonate Species in Nanosized Mineral Fractures

NASA Astrophysics Data System (ADS)

Kerisit, S.; Liu, C.

2010-12-01

Uranium is a major groundwater contaminant at uranium processing and mining sites as a result of intentional and accidental discharges of uranium-containing waste products into subsurface environments. Recent characterization has shown that uranium preferentially associates with intragrain and intra-aggregate domains in some of the uranium-contaminated sediments collected from the US Department of Energy Hanford Site [1, 2]. In these sediments, uranium existed as precipitated and/or adsorbed phases in grain micropores with nano- to microscale sizes. Desorption and diffusion characterization studies and continuum-scale modeling indicated that ion diffusion in the microfractures is a major mechanism that led to preferential uranium concentration in the microfracture regions and will control the future mobility of uranium in the subsurface sediments [1, 3-4]. However, the diffusion properties of uranyl species in the intragrain regions, especially at the solid-liquid interface, are still poorly understood. Therefore, a general aim of this work is to provide atomic-level insights into the contribution of microscopic surface effects to the slow diffusion process of uranyl species in porous media with nano- to microsized fractures. In this presentation, we will first present molecular dynamics (MD) simulations of feldspar-water interfaces to investigate their interfacial structure and dynamics and establish a theoretical framework for subsequent simulations of water and ion diffusion at these interfaces [5]. We will then report on MD simulations carried out to probe the effects of confinement and of the presence of the mineral surface on the diffusion of water and electrolyte ions in nanosized feldspar fractures [6]. Several properties of the mineral-water interface were varied, such as the fracture width, the ionic strength of the contacting solution, and the surface charge. Our calculations reveal a 2.0-2.5 nm interfacial region within which the diffusion properties of water and that of the electrolyte ions differ significantly from those in bulk aqueous solutions. We will then present MD simulations of the diffusion of a series of alkaline-earth uranyl carbonate species in aqueous solutions [7]. The MD simulations show that the alkaline-earth uranyl carbonate complexes have distinct water exchange dynamics, which could lead to different reactivities. Finally, we will present recent results on the diffusion and adsorption of uranyl carbonate species in intragrain micropores, modeled with the feldspar-water interfaces mentioned in the above, to help interpret the diffusion behavior of uranium in contaminated sediments. [1] Liu C. et al. Geochim. Cosmochim. Acta 68 4519 (2004) [2] McKinley J. P. et al. Geochim. Cosmochim. Acta 70 1873 (2006) [3] Liu C. et al. Water Resour. Res. 42 W12420 (2006) [4] Ilton E. S. et al. Environ. Sci. Technol. 42 1565 (2009) [5] Kerisit S. et al. Geochim. Cosmochim. Acta 72 1481 (2008) [6] Kerisit S. and Liu C. Environ. Sci. Technol. 43 777 (2009) [7] Kerisit S. and Liu C. Geochim. Cosmochim. Acta 74 4937 (2010)
Online support for individuals with spinal cord injuries: An ethnographic investigation

PubMed Central

O'Riley, Alisa A.; Rose, Jon; Dalal, Brinda

2014-01-01

Background Although social support is an important protective factor for individuals with spinal cord injuries (SCIs), individuals often encounter significant barriers to obtaining support after experiencing a SCI. It has been suggested that the Internet may serve to help individuals with disabilities overcome common barriers in obtaining support, yet research examining the efficacy of Internet-based support for individuals with SCI has been mixed. Objective To develop a more nuanced understanding of how individuals with SCI can or might use the Internet for support. Design Using an ethnographic approach, we conducted semi-structured interviews with nine individuals with SCI to explore perceived needs and barriers to information-seeking and online support. Setting Participants were recruited from Veterans Administration medical center outpatient and inpatient units providing specialty care to individuals with SCIs and from a community SCI Center of Excellence. Results Individuals with SCI gain emotional, problem-focused, and reciprocal support from online sources. Conclusions Online resources can provide important opportunities for social support for individuals with SCI. PMID:24090378
Transplantation of Human Skin-Derived Mesenchymal Stromal Cells Improves Locomotor Recovery After Spinal Cord Injury in Rats.

PubMed

Melo, Fernanda Rosene; Bressan, Raul Bardini; Forner, Stefânia; Martini, Alessandra Cadete; Rode, Michele; Delben, Priscilla Barros; Rae, Giles Alexander; Figueiredo, Claudia Pinto; Trentin, Andrea Gonçalves

2017-07-01

Spinal cord injury (SCI) is a devastating neurologic disorder with significant impacts on quality of life, life expectancy, and economic burden. Although there are no fully restorative treatments yet available, several animal and small-scale clinical studies have highlighted the therapeutic potential of cellular interventions for SCI. Mesenchymal stem cells (MSCs)-which are conventionally isolated from the bone marrow-recently emerged as promising candidates for treating SCI and have been shown to provide trophic support, ameliorate inflammatory responses, and reduce cell death following the mechanical trauma. Here we evaluated the human skin as an alternative source of adult MSCs suitable for autologous cell transplantation strategies for SCI. We showed that human skin-derived MSCs (hSD-MSCs) express a range of neural markers under standard culture conditions and are able to survive and respond to neurogenic stimulation in vitro. In addition, using histological analysis and behavioral assessment, we demonstrated as a proof-of-principle that hSD-MSC transplantation reduces the severity of tissue loss and facilitates locomotor recovery in a rat model of SCI. Altogether, the study provides further characterization of skin-derived MSC cultures and indicates that the human skin may represent an attractive source for cell-based therapies for SCI and other neurological disorders. Further investigation is needed to elucidate the mechanisms by which hSD-MSCs elicit tissue repair and/or locomotor recovery.
Japan Report, Science and Technology.

DTIC Science & Technology

1986-12-15

Sakamoto, "Glutathione," KODANSHA SCIENTIFIC (1985). 2. T. Tochikura, et al., J. FERMENT . TECHNOL., 45, 511 (1967). 3. Ibid., 46, 957 (1968). 4. S...Watanabe, et al., AGRIC. BIOL. CHEM., 36, 2265 (1972). 5. T. Tochikura, et al., J. FERMENT . TECHNOL., 48, 763 (1970). 6. T. Tachiki, et al., J. GEN. APPL...Tachiki and T. Tochikura, Fermentation and Industry, 41, 736, 1983). 13. K. Murata, J. Kato, and I. Senhata, Ibid., 39, 900 (1981). 14. Y. Isokazu
Oligomerization reactions for precursors to secondary organic aerosol: Comparison between two formation mechanisms for the oligomeric hydroxyalkyl hydroperoxides

NASA Astrophysics Data System (ADS)

Zhao, Qiangli; Wang, Weina; Liu, Fengyi; Lü, Jian; Wang, Wenliang

2017-10-01

To better understand the formation mechanism of oligomeric hydroxyalkyl hydroperoxides HOROO(SCI)nH composed of stabilized Criegee intermediate (SCI) as a chain unit, the reactions of SCI with hydroxyalkyl hydroperoxides (HOROOH) and hydroxyalkylperoxy radical (HORO2) as well as HO2 radical were investigated. For the reactions of HORO2 + SCI, two preferred pathways involving a SCI insertion in HOROOH hydroperoxide bond can be found, and the formation of HOROO(SCI)H is the dominant pathway in the reaction of HOCH2(CH3)2COOH + (CH3)2COO. The structures of the HORO2, HOROOH as well as the SCIs play a crucial role in determining the reactivity of the oligomerization. Both the reactions of HORO2 + SCI + HO2 and HOROOH + SCI could be the source of the processors to the formation of secondary organic aerosol (SOA). But from the point of free energy barriers, the formation of HOROO(SCI)H prefers to follow the mechanism involving initiation by the reaction of a HORO2 and a SCI, sequential addition of SCIs, and termination by reaction with the HO2 radical. The rate coefficients show negative temperature dependence and vary in different systems depending on the reactants. The reaction process and constituents of the products can be regulated by temperature and reactants.
Partitioning and transport of total and methyl mercury in the Lower Fox River, Wisconsin

USGS Publications Warehouse

Hurley, J.P.; Cowell, S.E.; Shafer, M.M.; Hughes, P.E.

1998-01-01

To investigate transport and partitioning processes of Hg(T) in the Fox River, we coupled detailed time series data of total mercury (Hg(T)) at the river mouth with transect sampling in the Lower Fox River. Unfiltered Hg(T) concentrations in the Fox River during the study period (April 1994-October 1995) ranged from 1.8 to 182 ng L(-1) with a median of 24.8 ng L-1, predominantly (93.6%) in the particulate phase. These levels were significantly elevated compared with other large tributaries to Lake Michigan (Hurley, J. P.; Shafer, M. M.; Cowell, S. E.; Overdier, J. T.; Hughes, P. E.; Armstrong, D. E. Environ. Sci. Technol. 1996, 30, 20932098). Transect sampling revealed progressively increasing water column Hg(T) concentrations and Hg(T) particulate enrichment downstream, which were consistent with trends in sediment Hg(T) levels in the river. Resuspended sediments are likely the predominant source of Hg from the Fox River into Green Bay. Despite elevated Hg(T) concentrations, methyl mercury (MeHg) concentrations were relatively low, suggesting limited bioavailability of Hg(T) associated with sediments.To investigate transport and partitioning processes of HgT in the Fox River, we coupled detailed time series data of total mercury (HgT) at the river mouth with transect sampling in the Lower Fox River. Unfiltered HgT concentrations in the Fox River during the study period (April 1994-October 1995) ranged from 1.8 to 182 ng L-1 with a median of 24.8 ng L-1, predominantly (93.6%) in the particulate phase. These levels were significantly elevated compared with other large tributaries to Lake Michigan. Transect sampling revealed progressively increasing water column HgT concentrations and HgT particulate enrichment downstream, which were consistent with trends in sediment HgT levels in the river. Resuspended sediments are likely the predominant source of Hg from the Fox River into Green Bay. Despite elevated HgT concentrations, methyl mercury (MeHg) concentrations were relatively low, suggesting limited bioavailability of HgT associated with sediments.
Sub-grid scale combustion models for large eddy simulation of unsteady premixed flame propagation around obstacles.

PubMed

Di Sarli, Valeria; Di Benedetto, Almerinda; Russo, Gennaro

2010-08-15

In this work, an assessment of different sub-grid scale (sgs) combustion models proposed for large eddy simulation (LES) of steady turbulent premixed combustion (Colin et al., Phys. Fluids 12 (2000) 1843-1863; Flohr and Pitsch, Proc. CTR Summer Program, 2000, pp. 61-82; Kim and Menon, Combust. Sci. Technol. 160 (2000) 119-150; Charlette et al., Combust. Flame 131 (2002) 159-180; Pitsch and Duchamp de Lageneste, Proc. Combust. Inst. 29 (2002) 2001-2008) was performed to identify the model that best predicts unsteady flame propagation in gas explosions. Numerical results were compared to the experimental data by Patel et al. (Proc. Combust. Inst. 29 (2002) 1849-1854) for premixed deflagrating flame in a vented chamber in the presence of three sequential obstacles. It is found that all sgs combustion models are able to reproduce qualitatively the experiment in terms of step of flame acceleration and deceleration around each obstacle, and shape of the propagating flame. Without adjusting any constants and parameters, the sgs model by Charlette et al. also provides satisfactory quantitative predictions for flame speed and pressure peak. Conversely, the sgs combustion models other than Charlette et al. give correct predictions only after an ad hoc tuning of constants and parameters. Copyright 2010 Elsevier B.V. All rights reserved.
Modeling the local biodiversity impacts of agricultural water use: case study of a wetland in the coastal arid area of Peru.

PubMed

Verones, Francesca; Bartl, Karin; Pfister, Stephan; Jiménez Vílchez, Ricardo; Hellweg, Stefanie

2012-05-01

Global water use is dominated by agriculture and has considerable influence on people's livelihood and ecosystems, especially in semiarid and arid regions. Methods to address the impacts of water withdrawal and consumption on terrestrial and aquatic ecosystems within life cycle assessment are still sparse and very generic. Regionalized characterization factors (CFs) for a groundwater-fed wetland at the arid coast of Peru are developed for groundwater and surface water withdrawal and consumption in order to address the spatial dependency of water use related impacts. Several agricultural scenarios for 2020 were developed in a workshop with local stakeholders and used for calculating total biodiversity impacts. In contrast to assumptions used in top-down approaches (e.g., Pfister et al. Environ. Sci Technol. 2009, 43, 4098 ), irrigation with surface water leads in this specific region to benefits for the groundwater-fed wetland, due to additional groundwater recharge from surplus irrigation water. However, irrigation with groundwater leads to ecological damage to the wetland. The CFs derived from the different scenarios are similar and can thus be used as general CFs for this region, helping local decision-makers to plan future agricultural development, including irrigation technologies, crop choices, and protection of the wetland. © 2012 American Chemical Society
Mobility of long-chain DNA in two-dimensional artificial gels

NASA Astrophysics Data System (ADS)

Turner, Stephen W. P.; Han, Jongyoon; Craighead, Harold G.

2000-03-01

In this study, a two-dimensional array of nanofabricated obstacles is used as an artificial gel to study the electrophoretic mobility dependence of DNA as a function of pore size, molecule length and electric field. Limitations in feature size have prevented previous studies from testing the crossover from the separating to the non-separating regime predicted by the biased reptation model of Lumpkin, Dejardin and Zimm[1] and the modified model of Duke, Semenov and Viovy.[2] That limitation is overcome in this work with the use of electron beam lithography to define features as small as 30 nm. Attainment of these feature sizes was made possible by the use of a sacrificial-layer-based technique for fluidics fabrication.[3] A novel band-launching strategy is used to provide band separation data for the first time in this system. Molecule lengths between 5 and 150 kilobases are studied for electric field strengths from 0.1 to 20 Volts per meter. [1] O. Lumpkin, P. Dejardin and B. Zimm, Biopolymers, Vol. 24, 1573-1593 (1985) [2] T. Duke, A. Semenov and J. Viovy, Phys. Rev. Lett. Vol. 69, No. 22, 3260-3263 (1992) [3] S. Turner, A. Perez, A. Lopez, and H. Craighead, J. Vac. Sci. Technol. B 16(6) 3835-3840 (1998)
DOE Office of Scientific and Technical Information (OSTI.GOV)

Lunden, Melissa M.; Delp, William W.

Effective exhaust hoods can mitigate the indoor air quality impacts of pollutant emissions from residential cooking. This study reports capture efficiencies (CE) measured for cooking generated particles for scripted cooking procedures in a 121-m3 chamber with kitchenette. CEs also were measured for burner produced CO2 during cooking and separately for pots and pans containing water. The study used four exhaust hoods previously tested by Delp and Singer (Environ. Sci. Technol., 2012, 46, 6167-6173). For pan-frying a hamburger over medium heat on the back burner, CEs for particles were similar to those for burner produced CO2 and mostly above 80percent. Formore » stir-frying green beans in a wok (high heat, front burner), CEs for burner CO2 during cooking varied by hood and airflow: CEs were 34-38percent for low (51?68 L s-1) and 54?72percent for high (109?138 L s-1) settings. CEs for 0.3?2.0 ?m particles during front burner stir-frying were 3?11percent on low and 16?70percent on high settings. Results indicate that CEs measured for burner CO2 are not predictive of CEs of cooking-generated particles under all conditions, but they may be suitable to identify devices with CEs above 80percent both for burner combustion products and for cooking-related particles.« less
Characterization of homoionic Fe 2+-type montmorillonite: Potential chemical species of iron contaminant

NASA Astrophysics Data System (ADS)

Kozai, Naofumi; Inada, Koichi; Adachi, Yoshifusa; Kawamura, Sachi; Kashimoto, Yusuke; Kozaki, Tamotsu; Sato, Seichi; Ohnuki, Toshihiko; Sakai, Takuro; Sato, Takahiro; Oikawa, Masakazu; Esaka, Fumitaka; Mitamura, Hisayoshi

2007-08-01

Fe 2+-montmorillonite with Fe 2+ ions occupying cation exchange sites is an ideal transformation product in bentonite buffer material. In our previous study on preparation and characterization of Fe 2+-montmorillonite, the montmorillonite sample that adsorbed Fe 2+ ions on almost all of the cation exchange sites was prepared using a FeCl 2 solution under an inert gas condition [N. Kozai, Y. Adachi, S. Kawamura, K. Inada, T. Kozaki, S. Sato, H. Ohashi, T. Ohnuki, T. Banba, J. Nucl. Sci. Technol. 38 (2001) 1141]. In view of the unstable nature of iron(II) chemical species, this study attempted to determine the potential contaminant iron chemical species in the sample. Nondestructive elemental analysis revealed that a small amount of chloride ions remained dispersed throughout the clay particles. The chloride ion retention may be due to the adsorption of FeCl + ion pairs in the initial FeCl 2 solution and the subsequent containment of the Cl - ions that are dissociated from the FeCl + ion pairs during excess salt removal treatment. Two explanations are advanced for the second process: the slow release of the remaining Cl - ions from the collapsed interlayer of the montmorillonite, and the transformation of a minor fraction of the remaining FeCl + ion pairs to iron(III) hydroxide chloride complexes having low solubility.
Temperature measurements in small holes drilled in superconducting bulk during pulsed field magnetization

NASA Astrophysics Data System (ADS)

Fujishiro, H.; Naito, T.; Furuta, D.; Kakehata, K.

2010-11-01

The time dependence of the temperatures T(z, t) has been measured along the thickness direction z in several drilled holes in a superconducting bulk during pulsed field magnetization (PFM) and the heat generation and heat transfer in the bulk have been discussed. In the previous paper [H. Fujishiro, S. Kawaguchi, K. Kakehata, A. Fujiwara, T. Tateiwa, T. Oka, Supercond. Sci. Technol. 19 (2006) S540], we calculated the T(z, t) profiles in the bulk by solving a three-dimensional heat-diffusion equation to reproduce the measured T(t) on the bulk surface; the heat generation took place adiabatically and the calculated T(z, t) was isothermal along the z direction. In this study, the measured T(z, t) at the top surface was higher than that at the bottom surface just after the pulse field application at t < 0.5 s, and then became isothermal with increasing time. These results suggest that the magnetic flux intrudes inhomogeneously into the bulk from the edge of the top surface and the periphery at the early stage. The inhomogeneous magnetic flux intrusion and the flux trap during PFM change depending on the strength of the pulsed field and the pulse number in the successive pulse field application.
Controls on radium transport by adsorption to iron minerals

NASA Astrophysics Data System (ADS)

Chen, M.; Wang, T.; Kocar, B. D.

2015-12-01

Radium is a naturally occurring radioactive metal found in many subsurface environments. Radium isotopes are generated by uranium and thorium decay, and are particularly abundant within groundwaters where minimal porewater flux leads to accumulation. These isotopes are used as natural tracers for estimating submarine groundwater discharge (SGD) [1], allowing for large scale estimation of GW fluxes into and out of the ocean [2]. They also represent a substantial hazard in wastewater produced after hydraulic fracturing for natural gas extraction [3], resulting in a significant risk of environmental release to surface and near-surface waters, and increased cost for water treatment or disposal. Adsorption to mineral surfaces represents a dominant pathway of radium retention in subsurface environments. For SGD studies, adsorption processes impact estimates of GW fluxes, while in hydraulic fracturing, radium adsorption to aquifer solids mediates wastewater radium activities. Analysis of past sorption studies revealed large variability in partition coefficients [4], while examination of radium adsorption kinetics and surface complexation have only recently started [5]. Accordingly, we present the results of sorption and column experiments of radium with a suite of iron minerals representative of those found within deep saline and near-surface (freshwater) aquifers, and evaluate impacts of varying salinity solutions through artificial waters. Further, we explore the impacts of pyrite oxidation and ferrihydrite transformation to other iron-bearing secondary minerals on the transport and retention of radium. These results will provide critical information on the mineralogical controls on radium retention in subsurface environments, and will therefore improve predictions of radium groundwater transport in natural and contaminated systems. [1] Charette, M.A., Buesseler, K.O. & Andrews, J.E., Limnol. Oceanogr. (2001). [2] Moore, W.S., Ann. Rev. Mar. Sci. (2010). [3] Vengosh, A. et al. Environ. Sci. Technol., (2014). [4] Beck, A., Cochran, M., Marine Chem., (2013). [5] Sajih, M. et al. Geochim. Cosmochim. AC. (2014).
Response to Julian et al. (2015) "comment on and reinterpretation of Gabriel et al. (2014) 'fish mercury and surface water sulfate relationships in the everglades protection area'".

PubMed

Gabriel, Mark C; Axelrad, Don; Orem, William; Osborne, Todd Z

2015-06-01

The purpose of this forum is to respond to a rebuttal submitted by Julian et al., Environ Manag 55:1-5, 2015 where they outlined their overall disagreement with the data preparation, methods, and interpretation of results presented in Gabriel et al. (Environ Manag 53:583-593, 2014). Here, we provide background information on the research premise presented in Gabriel et al. (Environ Manag 53:583-593, 2014) and provide a defense for this work using five themes. In spite of what Julian et al. perceive as limitations in the sampling methods and analytical tools used for this work, the relationships found between fish total mercury and surface water sulfate concentrations in Gabriel et al. (Environ Manag 53:583-593, 2014) are comparable to relationships between pore water methylmercury (MeHg) and pore water sulfate found in past studies indicating that sulfate is important to MeHg production and bioaccumulation in the Everglades. Julian et al. state "…there is no way to justify any ecosystem-wide sulfur strategy as a management approach to reduce mercury risk in the (Everglades) as suggested by Gabriel et al. (Environ Manag 53:583-593, 2014), Corrales et al. (Sci Tot Environ 409:2156-2162, 2011) and Orem et al. (Rev Environ Sci Technol 41 (S1):249-288, 2011)." We disagree, and having stated why sulfate input reduction to the Everglades may be the most effective means of reducing mercury in Everglades fish, it is important that research on sulfur and mercury biogeochemistry continues. If further studies support the relationship between sulfate loading reduction and MeHg reduction, sulfur mass balance studies should commence to (1) better quantify agricultural and connate seawater sulfate inputs and (2) define opportunities to reduce sulfate inputs to the Everglades ecosystem.
A review of the liquid metal diffusion data obtained from the space shuttle endeavour mission STS-47 and the space shuttle columbia mission STS-52

NASA Astrophysics Data System (ADS)

Shirkhanzadeh, Morteza

Accurate data of liquid-phase solute diffusion coefficients are required to validate the condensed -matter physics theories. However, the required data accuracy to discriminate between com-peting theoretical models is 1 to 2 percent(1). Smith and Scott (2) have recently used the measured values of diffusion coefficients for Pb-Au in microgravity to validate the theoretical values of the diffusion coefficients derived from molecular dynamics simulations and several Enskog hard sphere models. The microgravity data used was obtained from the liquid diffusion experiments conducted on board the Space Shuttle Endeavour (mission STS-47) and the Space Shuttle Columbia (mission STS-52). Based on the analysis of the results, it was claimed that the measured values of diffusion coefficients were consistent with the theoretical results and that the data fit a linear relationship with a slope slightly greater than predicted by the molecular dynamics simulations. These conclusions, however, contradict the claims made in previous publications (3-5) where it was reported that the microgravity data obtained from the shuttle experiments fit the fluctuation theory (D proportional to T2). A thorough analysis of data will be presented to demonstrate that the widely-reported micro-gravity results obtained from shuttle experiments are not reliable and sufficiantly accurate to discriminate between competing theoretical models. References: 1. J.P. Garandet, G. Mathiak, V. Botton, P. Lehmann and A. Griesche, Int. J. Thermophysics, 25, 249 (2004). 2.P.J. Scott and R.W. Smith, J. Appl. Physics 104, 043706 (2008). 3. R.W. Smith, Microgravity Sci. Technol. XI (2) 78-84 (1998). 4.Smith et al, Ann. N.Y. Acad. Sci. 974:56-67 (2002) (retracted). 5.R.A. Herring et al, J. Jpn. Soc. Microgravity Appl., Vol.16, 234-244 (1999).
Comparison of Experimenal Photooxidation Rates and Patterns in Glass- and Water-Based Oil Slicks with Daily Weathering Observed in the Gulf of Mexico

NASA Astrophysics Data System (ADS)

Sharpless, C.; Aeppli, C.; Reddy, C. M.; Swarthout, B.; Stewart, O. C.; Walters, M.; Valentine, D. L.

2016-02-01

Photooxidation is a well-known degradation route for toxic components of oil (e.g., PAHs). However, recent research suggests that it may play a broader role by enhancing oil's dark1 and photo-toxicity2 and producing persistent, oxidized hydrocarbons.3To better understand photooxidation's importance to oil weathering in marine systems, we are combining laboratory studies with field measurements of compositional changes under controlled conditions. Lab experiments have employed a solar simulator to photooxidize slicks of Dorado Well crude oil on water (Instant Ocean) and glass surfaces. Qualitatively similar compositional changes were seen in both systems, such as rapid loss of aromatics and production of oxidized hydrocarbons as assessed by GCMS, GCxGC, TLC-FID, and FTIR. Rates were much faster on water, a finding tentatively ascribed to the film on glass ( 750 um) being much thicker than on water ( 140 um). Further experiments have been conducted with thinner films on glass, and the results are being analyzed to clarify the importance of film thickness versus surface substrate for photoxidation kinetics. Naturally weathered samples were also collected in the Gulf during a cruise in June, 2015. Surface slicks from natural seeps were tracked and sampled daily under very calm seas with full sun, and solar irradiance was simultaneously measured. These samples, currently undergoing GCxGC and TLC-FID analyses, provide a unique reference with which to assess in-situ transformation rates and compositional changes due to photooxidation. Comparison between results from the field samples and lab experiments should help clarify the absolute contribution of photooxidation to marine oil weathering and improve efforts to use lab results to constrain estimates of environmental transformation rates. 1. D. Rial et al. J. Haz. Mat. 2013, 260, 67 2. J.P. Incardona et al. Proc. Natl. Acad. Sci. 2012, 109, E51 3. C. Aeppli et al. Environ. Sci. Technol. 2012, 46, 8799
Investigation of micrometre-sized fossil by laser mass spectrometer (LMS) designed for in situ space research

NASA Astrophysics Data System (ADS)

Tulej, Marek; Neubeck, Anna; Ivarsson, Magnus; Brigitte Neuland, Maike; Riedo, Andreas; Wurz, Peter

2015-04-01

Search for signatures of life on other planets is one of the most important goals of current planetary missions. Among various possible biomarkers, which can be investigated in situ on planetary surfaces, the detection of bio-relevant elements in planetary materials is of considerable interest and the abundance of isotopes can be important signatures of past and present bioactivities [1, 2]. We investigate the chemical composition of fossilised biological inclusions embedded in a carbonate host phase by a miniature laser ablation mass spectrometer (LMS) [3]. The LMS instrument combines a laser ablation ion source for ablation, atomisation and ionisation of surface material with a reflectron time-of-flight (TOF) mass spectrometer. LMS delivers mass spectra of almost all elements and their isotopes. In the current setup a fs-laser ablation ion source is applied with high lateral (15 um) and vertical (sub-um) resolution [4, 7] and the mass analyser supports mass resolution of 400-500 (at 56Fe mass peak) and dynamic range of eight orders of magnitude [5, 6]. From the 200 mass spectra recorded at 200 different locations on the carbonate sample surface, five mass spectra were identified which recorded the chemical composition of inclusions; from the other mass spectra the composition of the carbonate host matrix could be determined. The microscopic inspection of the sample surface and correlation with the coordinates of the laser ablation measurements made the confirmation to the location of the inclusion [8]. For the carbonate host matrix, the mass spectrometric analysis yielded the major elements H, C, O, Na, Mg, K and Ca and the trace elements Li, B and Cl. The measurements at the inclusion locations yielded in addition, the detection of F, Si, P, S, Mn, Fe, Ni, Co and Se. For most of the major elements the isotope ratios were found to be conform to the terrestrial values within a few per mills, while for minor and trace elements the determination of isotope ratios were less accurate due to low signal to noise ratios (SNR). The isotope abundances for the lightest isotope of B, S were observed to be larger than terrestrial, which is consistent with isotope fractionation by bio-relevant processes and a salty ocean. The studies demonstrates the current performance of the miniature LMS for in situ investigation of highly heterogeneous samples and its capabilities for the identification of fossilised biological matter. References: [1] Summons et al., Astrobiology, 11, 157, 2011. [2] Wurz et al., Sol. Sys. Res. 46 408, 2012. [3] Rohner et al.,Meas. Sci. Technol., 14, 2159, 2003. [4] Riedo et al., J. Anal. Atom. Spectrom. 28, 1256, 2013. [5] Riedo et al., J. Mass Spectrom.48, 1, 2013. [6] Neuland et al., Planet. Space. Sci. 101, 196, 2014. [7] Grimaudo et al., Anal. Chem. 2014, submitted. [8] Tulej et al. Geostand. Geoanal. Res., 2014; DOI: 10.1111/j.1751-908X.2014.00302.x

Design of a GaP/Si composite waveguide for CW terahertz wave generation via difference frequency mixing.

PubMed

Saito, Kyosuke; Tanabe, Tadao; Oyama, Yutaka

2014-06-10

We design a GaP/Si composite waveguide to achieve efficient terahertz (THz) wave generation under collinear phase-matched difference frequency mixing (DFM) between near-infrared light sources. This waveguide structure provides a strong mode confinement of both near-infrared sources and THz wave, resulting in an efficient mode overlapping. The numerical results show that the waveguide can produce guided THz wave (5.93 THz) with a power conversion efficiency of 6.6×10(-4) W(-1). This value is larger than previously obtained with the bulk GaP crystal: 0.5×10(-9) W(-1) [J. Lightwave Technol.27, 3057 (2009)]. Our proposed composite waveguide can be achieved by bridging the telecom wavelength and THz frequency region.
Chemical analysis of solid materials by a LIMS instrument designed for space research: 2D elemental imaging, sub-nm depth profiling and molecular surface analysis

NASA Astrophysics Data System (ADS)

Moreno-García, Pavel; Grimaudo, Valentine; Riedo, Andreas; Neuland, Maike B.; Tulej, Marek; Broekmann, Peter; Wurz, Peter

2016-04-01

Direct quantitative chemical analysis with high lateral and vertical resolution of solid materials is of prime importance for the development of a wide variety of research fields, including e.g., astrobiology, archeology, mineralogy, electronics, among many others. Nowadays, studies carried out by complementary state-of-the-art analytical techniques such as Auger Electron Spectroscopy (AES), X-ray Photoelectron Spectroscopy (XPS), Secondary Ion Mass Spectrometry (SIMS), Glow Discharge Time-of-Flight Mass Spectrometry (GD-TOF-MS) or Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) provide extensive insight into the chemical composition and allow for a deep understanding of processes that might have fashioned the outmost layers of an analyte due to its interaction with the surrounding environment. Nonetheless, these investigations typically employ equipment that is not suitable for implementation on spacecraft, where requirements concerning weight, size and power consumption are very strict. In recent years Laser Ablation/Ionization Mass Spectrometry (LIMS) has re-emerged as a powerful analytical technique suitable not only for laboratory but also for space applications.[1-3] Its improved performance and measurement capabilities result from the use of cutting edge ultra-short femtosecond laser sources, improved vacuum technology and fast electronics. Because of its ultimate compactness, simplicity and robustness it has already proven to be a very suitable analytical tool for elemental and isotope investigations in space research.[4] In this contribution we demonstrate extended capabilities of our LMS instrument by means of three case studies: i) 2D chemical imaging performed on an Allende meteorite sample,[5] ii) depth profiling with unprecedented sub-nm vertical resolution on Cu electrodeposited interconnects[6,7] and iii) preliminary molecular desorption of polymers without assistance of matrix or functionalized substrates.[8] On the whole, these results prove the adequacy of LMS as a powerful analytical tool able to address a great variety of topics in in situ space research. References: [1] U. Rohner, J. A. Whitby, P. Wurz, Meas. Sci. Technol. 2003, 14, 2159. [2] W. B. Brinckerhoff, G. G. Managadze, R. W. McEntire, A. F. Cheng, W. J. Green, Rev. Sci. Instrum. 2000, 71, 536. [3] G. G. Managadze, P. Wurz, R. Z. Sagdeev, A. E. Chumikov, M. Tuley, M. Yakovleva, N. G. Managadze, A. L. Bondarenko, Sol. Syst. Res. 2010, 44, 376. [4] A. Riedo, M. Neuland, S. Meyer, M. Tulej, P. Wurz, J. Anal. At. Spectrom. 2013, 28, 1256. [5] M.B. Neuland, S. Meyer, K. Mezger, A. Riedo, M. Tulej, P. Wurz, Planet. Space Sci. 2014, 101, 196. [6] V. Grimaudo, P. Moreno-García, A. Riedo, M. B. Neuland, M. Tulej, P. Broekmann, P. Wurz, Anal. Chem. 2015, 87, 2037. [7] A. Riedo, V. Grimaudo, P. Moreno-García, M. B. Neuland, M. Tulej, P. Wurz, P. Broekmann, J. Anal. At. Spectrom. 2015, 30, 2371. [8] P. Moreno-García, V. Grimaudo, A. Riedo, M. Tulej, P. Wurz, P. Broekmann, submitted to Rapid. Commun. Mass Spectrom., 2016.
Spinal Cord Injury Clinical Registries: Improving Care across the SCI Care Continuum by Identifying Knowledge Gaps.

PubMed

Dvorak, Marcel F; Cheng, Christiana L; Fallah, Nader; Santos, Argelio; Atkins, Derek; Humphreys, Suzanne; Rivers, Carly S; White, Barry A B; Ho, Chester; Ahn, Henry; Kwon, Brian K; Christie, Sean; Noonan, Vanessa K

2017-10-15

Timely access and ongoing delivery of care and therapeutic interventions is needed to maximize recovery and function after traumatic spinal cord injury (tSCI). To ensure these decisions are evidence-based, access to consistent, reliable, and valid sources of clinical data is required. The Access to Care and Timing Model used data from the Rick Hansen SCI Registry (RHSCIR) to generate a simulation of healthcare delivery for persons after tSCI and to test scenarios aimed at improving outcomes and reducing the economic burden of SCI. Through model development, we identified knowledge gaps and challenges in the literature and current health outcomes data collection throughout the continuum of SCI care. The objectives of this article were to describe these gaps and to provide recommendations for bridging them. Accurate information on injury severity after tSCI was hindered by difficulties in conducting neurological assessments and classifications of SCI (e.g., timing), variations in reporting, and the lack of a validated SCI-specific measure of associated injuries. There was also limited availability of reliable data on patient factors such as multi-morbidity and patient-reported measures. Knowledge gaps related to structures (e.g., protocols) and processes (e.g., costs) at each phase of care have prevented comprehensive evaluation of system performance. Addressing these knowledge gaps will enhance comparative and cost-effectiveness evaluations to inform decision-making and standards of care. Recommendations to do so were: standardize data element collection and facilitate database linkages, validate and adopt more outcome measures for SCI, and increase opportunities for collaborations with stakeholders from diverse backgrounds.
Spinal Cord Injury Clinical Registries: Improving Care across the SCI Care Continuum by Identifying Knowledge Gaps

PubMed Central

Cheng, Christiana L.; Fallah, Nader; Santos, Argelio; Atkins, Derek; Humphreys, Suzanne; Rivers, Carly S.; White, Barry A.B.; Ho, Chester; Ahn, Henry; Kwon, Brian K.; Christie, Sean; Noonan, Vanessa K.

2017-01-01

Abstract Timely access and ongoing delivery of care and therapeutic interventions is needed to maximize recovery and function after traumatic spinal cord injury (tSCI). To ensure these decisions are evidence-based, access to consistent, reliable, and valid sources of clinical data is required. The Access to Care and Timing Model used data from the Rick Hansen SCI Registry (RHSCIR) to generate a simulation of healthcare delivery for persons after tSCI and to test scenarios aimed at improving outcomes and reducing the economic burden of SCI. Through model development, we identified knowledge gaps and challenges in the literature and current health outcomes data collection throughout the continuum of SCI care. The objectives of this article were to describe these gaps and to provide recommendations for bridging them. Accurate information on injury severity after tSCI was hindered by difficulties in conducting neurological assessments and classifications of SCI (e.g., timing), variations in reporting, and the lack of a validated SCI-specific measure of associated injuries. There was also limited availability of reliable data on patient factors such as multi-morbidity and patient-reported measures. Knowledge gaps related to structures (e.g., protocols) and processes (e.g., costs) at each phase of care have prevented comprehensive evaluation of system performance. Addressing these knowledge gaps will enhance comparative and cost-effectiveness evaluations to inform decision-making and standards of care. Recommendations to do so were: standardize data element collection and facilitate database linkages, validate and adopt more outcome measures for SCI, and increase opportunities for collaborations with stakeholders from diverse backgrounds. PMID:28745934
Mineral licks: motivational factors for visitation and accompanying disease risk at communal use sites of elk and deer.

PubMed

Lavelle, Michael J; Phillips, Gregory E; Fischer, Justin W; Burke, Patrick W; Seward, Nathan W; Stahl, Randal S; Nichols, Tracy A; Wunder, Bruce A; VerCauteren, Kurt C

2014-12-01

Free-ranging cervids acquire most of their essential minerals through forage consumption, though occasionally seek other sources to account for seasonal mineral deficiencies. Mineral sources occur as natural geological deposits (i.e., licks) or as anthropogenic mineral supplements. In both scenarios, these sources commonly serve as focal sites for visitation. We monitored 11 licks in Rocky Mountain National Park, north-central Colorado, using trail cameras to quantify daily visitation indices (DVI) and soil consumption indices (SCI) for Rocky Mountain elk (Cervus elaphus) and mule deer (Odocoileus hemionus) during summer 2006 and documented elk, mule deer, and moose (Alces alces) visiting licks. Additionally, soil samples were collected, and mineral concentrations were compared to discern levels that explain rates of visitation. Relationships between response variables; DVI and SCI, and explanatory variables; elevation class, moisture class, period of study, and concentrations of minerals were examined. We found that DVI and SCI were greatest at two wet, low-elevation licks exhibiting relatively high concentrations of manganese and sodium. Because cervids are known to seek Na from soils, we suggest our observed association of Mn with DVI and SCI was a likely consequence of deer and elk seeking supplemental dietary Na. Additionally, highly utilized licks such as these provide an area of concentrated cervid occupation and interaction, thus increasing risk for environmental transmission of infectious pathogens such as chronic wasting disease, which has been shown to be shed in the saliva, urine, and feces of infected cervids.
Erratum: Erratum: Denoising Phase Unwrapping Algorithm for Precise Phase Shifting Interferometry

NASA Astrophysics Data System (ADS)

Phuc, Phan Huy; Rhee, Hyug-Gyo; Ghim, Young-Sik

2018-06-01

This is a revision of the reference list reported in the original article. In order to clear the contribution of the previous work on the incremental breadth-first search (IBFS) method applied to the PUMA algorithm, we add one more reference to the existing reference list, as in this erratum. Page 83 : In this paper, we propose an algorithm that modifies the Boykov-Kolmogorov (BK) algorithm using the incremental breadth-first search (IBFS) method [27, 28] to find paths from the source to the sink of a graph. [28] S. Ali, H. Khan, I. Shaik and F. Ali, Int. J. Eng. and Technol. 7, 254 (2015).
International comparison of the organisation of rehabilitation services and systems of care for patients with spinal cord injury.

PubMed

New, P W; Townson, A; Scivoletto, G; Post, M W M; Eriks-Hoogland, I; Gupta, A; Smith, E; Reeves, R K; Gill, Z A

2013-01-01

Survey. Describe and compare the organisation and delivery of rehabilitation services and systems of care for patients with spinal cord injury (SCI). International. Nine spinal rehabilitation units that manage traumatic SCI and non-traumatic SCI (NTSCI) patients. Survey based on clinical expertise and literature review. Completed between November 2010 and April 2011. All units reported public/government funding. Additional funding sources included compensation schemes, private insurance and self funding. Six units had formal attachment to an acute SCI unit. Five units (Italy, Ireland, India, Pakistan and Switzerland) provided a national service; two units (the Netherlands and USA) provided regional and two units (Australia and Canada) provided state/provincial services. The median number of SCI rehabilitation beds was 23 (interquartile range=16-30). All units admitted both traumatic SCI and NTSCI patients. The median proportion of patients admitted who had traumatic SCI was 45% (IQR 20-48%) and 40% (IQR 30-42%) had NTSCI. The rehabilitation team in all centres determined patient readiness for discharge. There was great variability between units in the availability of SCI speciality services, ancillary services and staff/patient ratios. There was a wide range of differences in the organisation, systems of care and services available for patients with SCI in rehabilitation units in different countries. Understanding these differences is important when comparing patient outcomes from different settings. A standardised collection of these system variables should be considered as part of future studies and could be included in the ISCoS data set project.
Enhancing health care professionals' and trainees' knowledge of physical activity guidelines for adults with and without SCI.

PubMed

Shirazipour, Celina H; Tomasone, Jennifer R; Martin Ginis, Kathleen A

2018-01-11

Health care providers (HCPs) are preferred sources of physical activity (PA) information; however, minimal research has explored HCPs' knowledge of spinal cord injury (SCI) PA guidelines, and no research has examined HCP trainees' PA guideline knowledge. The current study explored HCPs' and trainees' initial knowledge of PA guidelines for both adults with SCI and the general population, and the utility of an event-based intervention for improving this knowledge. Participants (HCPs n = 129; trainees n = 573) reported guideline knowledge for both sets of guidelines (SCI and general population) immediately after, one-month, and six-months following the intervention. Frequencies determined guideline knowledge at each timepoint, while chi-squared tests examined differences in knowledge of both guidelines, as well as knowledge differences in the short- and long-term. Results demonstrated that HCPs and trainees lack knowledge of PA guidelines, particularly guidelines for adults with SCI. The results further suggest that a single event-based intervention is not effective for improving long-term guideline knowledge. Suggestions are made for future research with the aim of improving interventions that target HCP and HCP trainees' long-term guideline knowledge for adults with SCI and the general population.
A dense Black Carbon network in the region of Paris, France: Implementation, objectives, and first results

NASA Astrophysics Data System (ADS)

Sciare, Jean; Petit, Jean-Eudes; Sarda-Esteve, Roland; Bonnaire, Nicolas; Gros, Valérie; Pernot, Pierre; Ghersi, Véronique; Ampe, Christophe; Songeur, Charlotte; Brugge, Benjamin; Debert, Christophe; Favez, Olivier; Le Priol, Tiphaine; Mocnik, Grisa

2013-04-01

Motivations. Road traffic and domestic wood burning emissions are two major contributors of particulate pollution in our cities. These two sources emit ultra-fine, soot containing, particles in the atmosphere, affecting health adversely, increasing morbidity and mortality from cardiovascular and respiratory conditions and casing lung cancer. A better characterization of soot containing aerosol sources in our major cities provides useful information for policy makers for assessment, implementation and monitoring of strategies to tackle air pollution issues affecting human health with additional benefits for climate change. Objectives. This study on local sources of primary Particulate Matter (PM) in the megacity of Paris is a follow-up of several programs (incl. EU-FP7-MEGAPOLI) that have shown that fine PM - in the Paris background atmosphere - is mostly secondary and imported. A network of 14 stations of Black Carbon has been implemented in the larger region of Paris to provide highly spatially resolved long term survey of local combustion aerosols. To our best knowledge, this is the first time that such densely BC network is operating over a large urban area, providing novel information on the spatial/temporal distribution of combustion aerosols within a post-industrialized megacity. Experimental. As part of the PRIMEQUAL "PREQUALIF" project, a dense Black Carbon network (of 14 stations) has been installed over the city of Paris beginning of 2012 in order to produce spatially resolved Equivalent Black Carbon (EBC) concentration maps with high time resolution through modeling and data assimilation. This network is composed of various real-time instruments (Multi-Angle Absorption Photometer, MAAP by THERMO; Multi-wavelength Aethalometers by MAGEE Scientific) implemented in contrasted sites (rural background, urban background, traffic) complementing the regulated measurements (PM, NOx) in the local air quality network AIRPARIF (http://www.airparif.asso.fr/). Contribution of imported versus local EBC is calculated using the "Lenschow" methodology (Lenschow et al., 2001), whereas the influence of domestic wood burning EBC (vs traffic) over the region of Paris is evaluated using the Aethalometer model developed by Sandradewi et al. (2008). Results and discussion. First results of this BC network are presented here including the temporal variations of EBC from wood burning (domestic heating) and fossil fuel (traffic) for the various sites (1-year observation for rural background and traffic sites; 4-year observations for urban background). The local versus imported contributions of EBC are also presented and discussed for these 2 sources. References. Lenschow, P., et al., Some ideas about the sources of PM10, Atmospheric Environment 35 Supplement No. 1 (2001) S23-S33 Sandradewi, J., et al., Using aerosol light absorption measurements for the quantitative determination of wood burning and traffic emission contributions to particulate matter, Environ. Sci. Technol., 42, 3316-3323, 2008
Dynamic mechanical characterization of aluminum: analysis of strain-rate-dependent behavior

NASA Astrophysics Data System (ADS)

Rahmat, Meysam

2018-05-01

A significant number of materials show different mechanical behavior under dynamic loads compared to quasi-static (Salvado et al. in Prog. Mater. Sci. 88:186-231, 2017). Therefore, a comprehensive study of material dynamic behavior is essential for applications in which dynamic loads are dominant (Li et al. in J. Mater. Process. Technol. 255:373-386, 2018). In this work, aluminum 6061-T6, as an example of ductile alloys with numerous applications including in the aerospace industry, has been studied under quasi-static and dynamic tensile tests with strain rates of up to 156 s^{-1}. Dogbone specimens were designed, instrumented and tested with a high speed servo-hydraulic load frame, and the results were validated with the literature. It was observed that at a strain rate of 156 s^{-1} the yield and ultimate strength increased by 31% and 33% from their quasi-static values, respectively. Moreover, the failure elongation and fracture energy per unit volume also increased by 18% and 52%, respectively. A Johnson-Cook model was used to capture the behavior of the material at different strain rates, and a modified version of this model was presented to enhance the capabilities of the original model, especially in predicting material properties close to the failure point. Finally, the fracture surfaces of specimens tested under quasi-static and dynamic loads were compared and conclusions about the differences were drawn.
Use of Threshold of Toxicological Concern (TTC) with High ...

EPA Pesticide Factsheets

Although progress has been made with HTS (high throughput screening) in profiling biological activity (e.g., EPA’s ToxCast™), challenges arise interpreting HTS results in the context of adversity & converting HTS assay concentrations to equivalent human doses for the broad domain of commodity chemicals. Here, we propose using TTC as a risk screening method to evaluate exposure ranges derived from NHANES for 7968 chemicals. Because the well-established TTC approach uses hazard values derived from in vivo toxicity data, relevance to adverse effects is robust. We compared the conservative TTC (non-cancer) value of 90 μg/day (1.5 μg/kg/day) (Kroes et al., Fd Chem Toxicol, 2004) to quantitative exposure predictions of the upper 95% credible interval (UCI) of median daily exposures for 7968 chemicals in 10 different demographic groups (Wambaugh et al., Environ Sci Technol. 48:12760-7, 2014). Results indicate: (1) none of the median values of credible interval of exposure for any chemical in any demographic group was above the TTC; & (2) fewer than 5% of chemicals had an UCI that exceeded the TTC for any group. However, these median exposure predictions do not cover highly exposed (e.g., occupational) populations. Additionally, we propose an expanded risk-based screening workflow that comprises a TTC decision tree that includes screening compounds for structural alerts for DNA reactivity, OPs & carbamates as well as a comparison with bioactivity-based margins of
Measurement of acoustic velocity components in a turbulent flow using LDV and high-repetition rate PIV

NASA Astrophysics Data System (ADS)

Léon, Olivier; Piot, Estelle; Sebbane, Delphine; Simon, Frank

2017-06-01

The present study provides theoretical details and experimental validation results to the approach proposed by Minotti et al. (Aerosp Sci Technol 12(5):398-407, 2008) for measuring amplitudes and phases of acoustic velocity components (AVC) that are waveform parameters of each component of velocity induced by an acoustic wave, in fully turbulent duct flows carrying multi-tone acoustic waves. Theoretical results support that the turbulence rejection method proposed, based on the estimation of cross power spectra between velocity measurements and a reference signal such as a wall pressure measurement, provides asymptotically efficient estimators with respect to the number of samples. Furthermore, it is shown that the estimator uncertainties can be simply estimated, accounting for the characteristics of the measured flow turbulence spectra. Two laser-based measurement campaigns were conducted in order to validate the acoustic velocity estimation approach and the uncertainty estimates derived. While in previous studies estimates were obtained using laser Doppler velocimetry (LDV), it is demonstrated that high-repetition rate particle image velocimetry (PIV) can also be successfully employed. The two measurement techniques provide very similar acoustic velocity amplitude and phase estimates for the cases investigated, that are of practical interest for acoustic liner studies. In a broader sense, this approach may be beneficial for non-intrusive sound emission studies in wind tunnel testings.
Industrial applications using BASF eco-efficiency analysis: perspectives on green engineering principles.

PubMed

Shonnard, David R; Kicherer, Andreas; Saling, Peter

2003-12-01

Life without chemicals would be inconceivable, but the potential risks and impacts to the environment associated with chemical production and chemical products are viewed critically. Eco-efficiency analysis considers the economic and life cycle environmental effects of a product or process, giving these equal weighting. The major elements of the environmental assessment include primary energy use, raw materials utilization, emissions to all media, toxicity, safety risk, and land use. The relevance of each environmental category and also for the economic versus the environmental impacts is evaluated using national emissions and economic data. The eco-efficiency analysis method of BASF is briefly presented, and results from three applications to chemical processes and products are summarized. Through these applications, the eco-efficiency analyses mostly confirm the 12 Principles listed in Anastas and Zimmerman (Environ. Sci. Technol. 2003, 37(5), 94A), with the exception that, in one application, production systems based on bio-based feedstocks were not the most eco-efficient as compared to those based on fossil resources. Over 180 eco-efficiency analyses have been conducted at BASF, and their results have been used to support strategic decision-making, marketing, research and development, and communication with external parties. Eco-efficiency analysis, as one important strategy and success factor in sustainable development, will continue to be a very strong operational tool at BASF.
Metal mobilization by iron- and sulfur-oxidizing bacteria in a multiple extreme mine tailings in the Atacama Desert, Chile.

PubMed

Korehi, H; Blöthe, M; Sitnikova, M A; Dold, B; Schippers, A

2013-03-05

The marine shore sulfidic mine tailings dump at the Chañaral Bay in the Atacama Desert, northern Chile, is characterized by extreme acidity, high salinity, and high heavy metals concentrations. Due to pyrite oxidation, metals (especially copper) are mobilized under acidic conditions and transported toward the tailings surface and precipitate as secondary minerals (Dold, Environ. Sci. Technol. 2006, 40, 752-758.). Depth profiles of total cell counts in this almost organic-carbon free multiple extreme environment showed variable numbers with up to 10(8) cells g(-1) dry weight for 50 samples at four sites. Real-time PCR quantification and bacterial 16S rRNA gene diversity analysis via clone libraries revealed a dominance of Bacteria over Archaea and the frequent occurrence of the acidophilic iron(II)- and sulfur-oxidizing and iron(III)-reducing genera Acidithiobacillus, Alicyclobacillus, and Sulfobacillus. Acidophilic chemolithoautotrophic iron(II)-oxidizing bacteria were also frequently found via most-probable-number (MPN) cultivation. Halotolerant iron(II)-oxidizers in enrichment cultures were active at NaCl concentrations up to 1 M. Maximal microcalorimetrically determined pyrite oxidation rates coincided with maxima of the pyrite content, total cell counts, and MPN of iron(II)-oxidizers. These findings indicate that microbial pyrite oxidation and metal mobilization preferentially occur in distinct tailings layers at high salinity. Microorganisms for biomining with seawater salt concentrations obviously exist in nature.
Creating wealth from groundwater for dollar-a-day farmers: Where the silent revolution and the four revolutions to end rural poverty meet

NASA Astrophysics Data System (ADS)

Polak, Paul; Yoder, Robert

2006-03-01

More than 550 million of the current 1.1 billion people earning less than 1-a-day earn a living from agriculture in developing countries. A revolution in water control is needed to develop and mass-disseminate new, affordable, small-plot irrigation technologies. A revolution in agriculture is required to enable smallholders to produce high-value, marketable, labor-intensive cash crops. A revolution in markets is needed to open access to markets for the crops they produce and the inputs they need to produce them. Finally, a revolution in design, based on the ruthless pursuit of affordability, is needed to harness shallow groundwater. The experiences of suppliers of treadle pumps, low-cost drip irrigation and water storage systems were examined. The wealth these technologies generated, coupled with falling prices for small diesel pumps in countries like India and China, created a suitable environment for the rapid adoption of affordable diesel pump tubewells, which in turn created vigorous water markets and expanded access to affordable irrigation water for smallholders. The combination of smallholder-centered revolutions, along with the ‘silent revolution in groundwater’ described by Llamas and Martinez-Santos (Water Sci Technol 51(8):167-174, 2005) provide new practical options for meeting the UN Millennium Development Goals on poverty and hunger by 2015.
The SOA formation model combined with semiempirical quantum chemistry for predicting UV-Vis absorption of secondary organic aerosols.

PubMed

Zhong, Min; Jang, Myoseon; Oliferenko, Alexander; Pillai, Girinath G; Katritzky, Alan R

2012-07-07

A new model for predicting the UV-visible absorption spectra of secondary organic aerosols (SOA) has been developed. The model consists of two primary parts: a SOA formation model and a semiempirical quantum chemistry method. The mass of SOA is predicted using the PHRCSOA (Partitioning Heterogeneous Reaction Consortium Secondary Organic Aerosol) model developed by Cao and Jang [Environ. Sci. Technol., 2010, 44, 727]. The chemical composition is estimated using a combination of the kinetic model (MCM) and the PHRCSOA model. The absorption spectrum is obtained by taking the sum of the spectrum of each SOA product calculated using a semiempirical NDDO (Neglect of Diatomic Differential Overlap)-based method. SOA was generated from the photochemical reaction of toluene or α-pinene at different NO(x) levels (low NO(x): 24-26 ppm, middle NO(x): 49 ppb, high NO(x): 104-105 ppb) using a 2 m(3) indoor Teflon film chamber. The model simulation reasonably agrees with the measured absorption spectra of α-pinene SOA but underestimates toluene SOA under high and middle NO(x) conditions. The absorption spectrum of toluene SOA is moderately enhanced with increasing NO(x) concentrations, while that of α-pinene SOA is not affected. Both measured and calculated UV-visible spectra show that the light absorption of toluene SOA is much stronger than that of α-pinene SOA.
Bacterial population dynamics during uranium reduction andre-oxidation: Application of a novel high density oligonucleotidemicroarray approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brodie, Eoin L.; DeSantis, Todd Z.; Joyner, Dominique C.

2006-01-30

Reduction of soluble uranium U(VI) to less-soluble uraniumU(IV) is a promising approach to minimize migration from contaminatedaquifers. It is generally assumed that, under constant reducingconditions, U(IV) is stable and immobile; however, in a previous study,we documented reoxidation of U(IV) under continuous reducing conditions(Wan et al., Environ. Sci. Technol. 2005, 39:6162 6169). To determine ifchanges in microbial community composition were a factor in U(IV)reoxidation, we employed a high-density phylogenetic DNA microarray (16Smicroarray) containing 500,000 probes to monitor changes in bacterialpopulations during this remediation process. Comparison of the 16Smicroarray with clone libraries demonstrated successful detection andclassification of most clone groups. Analysis ofmore » the most dynamic groupsof 16S rRNA gene amplicons detected by the 16S microarray identified fiveclusters of bacterial subfamilies responding in a similar manner. Thisapproach demonstrated that amplicons of known metal-reducing bacteriasuch as Geothrix fermentans (confirmed by quantitative PCR) and thosewithin the Geobacteraceae were abundant during U(VI) reduction and didnot decline during the U(IV) reoxidation phase. Significantly, it appearsthat the observed reoxidation of uranium under reducing conditionsoccurred despite elevated microbial activity and the consistent presenceof metal-reducing bacteria. High-density phylogenetic microarraysconstitute a powerful tool, enabling the detection and monitoring of asubstantial portion of the microbial population in a routine, accurate,and reproducible manner.« less
Scintillator based detector for fast-ion losses induced by magnetohydrodynamic instabilities in the ASDEX upgrade tokamak.

PubMed

García-Muñoz, M; Fahrbach, H-U; Zohm, H

2009-05-01

A scintillator based detector for fast-ion losses has been designed and installed on the ASDEX upgrade (AUG) tokamak [A. Herrmann and O. Gruber, Fusion Sci. Technol. 44, 569 (2003)]. The detector resolves in time the energy and pitch angle of fast-ion losses induced by magnetohydrodynamics (MHD) fluctuations. The use of a novel scintillator material with a very short decay time and high quantum efficiency allows to identify the MHD fluctuations responsible for the ion losses through Fourier analysis. A Faraday cup (secondary scintillator plate) has been embedded behind the scintillator plate for an absolute calibration of the detector. The detector is mounted on a manipulator to vary its radial position with respect to the plasma. A thermocouple on the inner side of the graphite protection enables the safety search for the most adequate radial position. To align the scintillator light pattern with the light detectors a system composed by a lens and a vacuum-compatible halogen lamp has been allocated within the detector head. In this paper, the design of the scintillator probe, as well as the new technique used to analyze the data through spectrograms will be described. A last section is devoted to discuss the diagnosis prospects of this method for ITER [M. Shimada et al., Nucl. Fusion 47, S1 (2007)].
Bioenhanced DNAPL Dissolution: Understanding how Microbial Competition, Biostimulation, and Bioaugmentation Affect Source Zone Longevity

NASA Astrophysics Data System (ADS)

Becker, J. G.; Seagren, E. A.

2006-12-01

The presence of dense non-aqueous phase liquids (DNAPLs) at many chlorinated ethene-contaminated sites can greatly extend the time frames needed to reduce dissolved contaminants to regulatory levels using bioremediation. However, it has been demonstrated that mass removal from chlorinated ethene DNAPLs can potentially be enhanced through dehalorespiration of dissolved contaminants near the NAPL-water interface. Although promising, the amount of "bioenhancement" that can be achieved under optimal conditions is currently not known, and the real significance and engineering potential of this phenomenon currently are not well understood, in part because it can be influenced by a complex set of factors, including DNAPL properties, hydrodynamics, substrate concentrations, and microbial competition for growth substrates. In this study it is hypothesized that: (1) different chlorinated ethene-respiring strains may dominate within different zones of a contaminant plume emanating from a DNAPL source zone due to variations in substrate availability, and microbial competition for chlorinated ethenes and/or electron donors; and (2) the outcome of competitive interactions near the DNAPL source zone will affect the longevity of DNAPL source zones by influencing the degree of dissolution bioenhancement, while the outcome of competitive interactions further downgradient will determine the extent of contaminant dechlorination. To demonstrate the validity of the proposed hypothesis, a series of simple, "proof-of-concept," mathematical simulations evaluating the effects of competitive interactions on the distribution of dehalorespirers at the DNAPL-water interface, the dissolution of tetrachloroethene (PCE), and extent of PCE detoxification were performed in a model competition scenario, in which Dehalococcoides ethenogenes and another dehalorespirer (Desulfuromonas michiganensis) compete for the electron acceptor (PCE) and/or electron donor. The model domain for this evaluation simulates a contaminant-source zone consisting of DNAPL ganglia trapped in a subsurface porous medium that slowly releases organic pollutants into the groundwater flowing past it. The model used in the simulations was based on a biokinetic model recently developed by Becker [Environ. Sci. Technol. 40(14):4473-4480] to describe competition among PCE-respiring populations in a homogenous continuously-stirred tank reactor. Becker's model was expanded by adding terms for chlorinated ethene partitioning between the DNAPL and aqueous phases, as well as advection and dispersion of aqueous chlorinated ethenes. The results of these preliminary simulations demonstrate that the outcome of competition between populations for growth substrates can have a significant impact on bioenhancement and, thus, on DNAPL source zone longevity. Although these proof-of- concept simulations do not incorporate all of the complexity of actual field systems, the modeling results are useful for identifying which parameters are important in determining the outcome of competition in the different scenarios and its impact on DNAPL dissolution. This information is needed to understand how biostimulation and bioaugmentation affect bioenhancement by stimulating different populations and develop bioremediation strategies that incorporate these treatment technologies while balancing the twin clean-up goals of reduced source longevity and complete detoxification.
Schwann Cells Transplantation Improves Locomotor Recovery in Rat Models with Spinal Cord Injury: a Systematic Review and Meta-Analysis.

PubMed

Yang, Lei; Ge, Yingbin; Tang, Jian; Yuan, Jinxia; Ge, Dawei; Chen, Hongtao; Zhang, Hongxiu; Cao, Xiaojian

2015-01-01

Schwann cells (SCs) which were demonstrated to be responsible for axonal myelination and ensheathing are widely studied and commonly used for cell transplantation to treat spinal cord injury (SCI). We performed this meta-analysis to summarize the effects of SCs versus controls for locomotor recovery in rat models of traumatic SCI. Studies of the BBB scores after transplantation of SCs were searched out from Pubmed, Cochrane Library Medline databases and analyzed by Review Manager 5.2.5. Thirteen randomized controlled animal trials were selected with 283 rats enrolled. The studies were divided to different subgroups by different models of SCI, different cell doses for transplantation, different sources of SCs and different transplantation ways. The pooled results of this meta-analysis suggested that SCs transplantation cannot significantly improve the locomotor recovery at a short time after intervention (1 week after transplantation) in both impacted and hemi-sected SCI models. However, at a longer time after intervention (3, 5-7 and over 8 weeks after transplantation), significant improvement of BBB score emerged in SCs groups compared with control groups. Subgroup analyses revealed that SCs transplantation can significantly promote locomotor recovery regardless of in high or low doses of cells, from different sources (isolated from sciatic nerves or differentiated from bone marrow stromal cells(BMSCs)) and with or without scaffolding. SCs seem to demonstrate substantial beneficial effects on locomotor recovery in a widely-used animal models of SCI. © 2015 The Author(s) Published by S. Karger AG, Basel.

Spectroscopic study of low pressure, low temperature H2-CH4-CO2 microwave plasmas used for large area deposition of nanocrystalline diamond films. Part II: on plasma chemical processes

NASA Astrophysics Data System (ADS)

Nave, A. S. C.; Baudrillart, B.; Hamann, S.; Bénédic, F.; Lombardi, G.; Gicquel, A.; van Helden, J. H.; Röpcke, J.

2016-12-01

In a distributed antenna array (DAA) reactor, microwave H2 plasmas with admixtures of 2.5% CH4 and 1% CO2 used for the deposition of nanocrystalline diamond films have been studied by infrared laser absorption and optical emission spectroscopy (OES) techniques. The experiments were carried out in order to analyze the dependence of plasma chemical phenomena on power and pressure at relatively low pressures, up to 0.55 mbar, and power values, up to 3 kW. The evolution of the concentration of the methyl radical, CH3, of five stable molecules, CH4, CO2, CO, C2H2 and C2H6, and of vibrationally excited CO in the first and second hot band was monitored in the plasma processes by in situ infrared laser absorption spectroscopy using tunable lead salt diode lasers (TDL) and an external-cavity quantum cascade laser (EC-QCL) as radiation sources. OES was applied simultaneously to obtain complementary information about the degree of dissociation of the H2 precursor and of its gas temperature. The experimental results are presented in two separate parts. In Part I, the first paper in a two-part series, the measurement of the gas (T gas), rotational (T rot) and vibrational (T vib) temperatures of the various species in the complex plasma was the main focus of interest. Depending on the different plasma zones the gas temperature was found to range between about 360 and 1000 K inside the DAA reactor (Nave et al 2016 Plasma Sources Sci. Technol. 25 065002). In Part II, the present paper, taking into account the temperatures determined in the first paper, the concentrations of the various species, which were found to be in a range between 1011 and 1015 cm-3, are the focus of interest. The influence of the discharge parameters power and pressure on the molecular concentrations has been studied. To achieve further insight into general plasma chemical aspects the dissociation of the carbon precursor gases including their fragmentation and conversion to the reaction products has been analyzed in detail.
Recovery of nitrogen and phosphorus from alkaline fermentation liquid of waste activated sludge and application of the fermentation liquid to promote biological municipal wastewater treatment.

PubMed

Tong, Juan; Chen, Yinguang

2009-07-01

In previous publications we reported that by controlling the pH at 10.0 the accumulation of short-chain fatty acids (SCFA) during waste activated sludge (WAS) fermentation was remarkably improved [Yuan, H., Chen, Y., Zhang, H., Jiang, S., Zhou, Q., Gu, G., 2006. Improved bioproduction of short-chain fatty acids (SCFAs) from excess sludge under alkaline conditions. Environ. Sci. Technol. 40, 2025-2029], but significant ammonium nitrogen (NH(4)-N) and soluble ortho-phosphorus (SOP) were released [Chen, Y., Jiang, S., Yuan, H., Zhou, Q., Gu, G., 2007. Hydrolysis and acidification of waste activated sludge at different pHs. Water Res. 41, 683-689]. This paper investigated the simultaneous recovery of NH(4)-N and SOP from WAS alkaline fermentation liquid and the application of the fermentation liquid as an additional carbon source for municipal wastewater biological nitrogen and phosphorus removal. The central composite design (CCD) of the response surface methodology (RSM) was employed to optimize and model the simultaneous NH(4)-N and SOP recovery from WAS alkaline fermentation liquid. Under the optimum conditions, the predicted and experimental recovery efficiency was respectively 73.4 and 75.7% with NH(4)-N, and 82.0 and 83.2% with SOP, which suggested that the developed models described the experiments well. After NH(4)-N and SOP recovery, the alkaline fermentation liquid was added to municipal wastewater, and the influence of volume ratio of fermentation liquid to municipal wastewater (FL/MW) on biological nitrogen and phosphorus removal was investigated. The addition of fermentation liquid didn't significantly affect nitrification. Both SOP and total nitrogen (TN) removal were increased with fermentation liquid, but there was no significant increase at FL/MW greater than 1/35. Compared to the blank test, the removal efficiency of SOP and TN at FL/MW=1/35 was improved from 44.0 to 92.9%, and 63.3 to 83.2%, respectively. The enhancement of phosphorus and nitrogen removal was mainly attributed to the increase of influent SCFA, or rather, the increase of intracellular polyhydroxyalkanoates (PHA) which served as the carbon and energy sources for denitrification and phosphorus uptake. The addition of alkaline fermentation liquid to municipal wastewater, however, increased the effluent COD, which was caused mainly by the increase of influent humic acid, not protein or carbohydrate.
Development of an Implantable Pudendal Nerve Stimulator To Restore Bladder Function in Humans After SCI

DTIC Science & Technology

2016-10-01

new version of the stimulator will be manufactured and tested again. This design-build-test cycle will be repeated multiple times during the second...AWARD NUMBER: W81XWH-15-C-0066 TITLE: Development of an Implantable Pudendal Nerve Stimulator To Restore Bladder Function in Humans After SCI...response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and
Measuring body structures and body functions from the International Classification of Functioning, Disability, and Health perspective: considerations for biomedical parameters in spinal cord injury research.

PubMed

Eriks-Hoogland, Inge E; Brinkhof, Martin W G; Al-Khodairy, Abdul; Baumberger, Michael; Brechbühl, Jörg; Curt, Armin; Mäder, Mark; Stucki, Gerold; Post, Marcel W M

2011-11-01

The aims of this study were to provide a selection of biomedical domains based on the comprehensive International Classification of Functioning, Disability, and Health (ICF) core sets for spinal cord injury (SCI) and to present an overview of the corresponding measurement instruments. Based on the Biomedical Domain Set, the SCI literature, the International Spinal Cord Society international data sets, and the Spinal Cord Injury Rehabilitation Evidence project publications were used to derive category specifications for use in SCI research. Expert opinion was used to derive a priority selection. The same sources were used to determine candidate measurement instruments for the specification of body functions and body structures using an example, and guiding principles were applied to select the most appropriate biomedical measurement instrument(s) for use in an SCI research project. Literature searches were performed for 41 second-level ICF body functions categories and for four second-level ICF body structures categories. For some of these categories, only a few candidate measurement instruments were found with limited variation in the type of measurement instruments. An ICF-based measurement set for biomedical aspects of functioning with SCI was established. For some categories of the ICF core sets for SCI, there is a need to develop measurement instruments.
The average cost of pressure ulcer management in a community dwelling spinal cord injury population.

PubMed

Chan, Brian C; Nanwa, Natasha; Mittmann, Nicole; Bryant, Dianne; Coyte, Peter C; Houghton, Pamela E

2013-08-01

Pressure ulcers (PUs) are a common secondary complication experienced by community dwelling individuals with spinal cord injury (SCI). There is a paucity of literature on the health economic impact of PU in SCI population from a societal perspective. The objective of this study was to determine the resource use and costs in 2010 Canadian dollars of a community dwelling SCI individual experiencing a PU from a societal perspective. A non-comparative cost analysis was conducted on a cohort of community dwelling SCI individuals from Ontario, Canada. Medical resource use was recorded over the study period. Unit costs associated with these resources were collected from publicly available sources and published literature. Average monthly cost was calculated based on 7-month follow-up. Costs were stratified by age, PU history, severity level, location of SCI, duration of current PU and PU surface area. Sensitivity analyses were also carried out. Among the 12 study participants, total average monthly cost per community dwelling SCI individual with a PU was $4745. Hospital admission costs represented the greatest percentage of the total cost (62%). Sensitivity analysis showed that the total average monthly costs were most sensitive to variations in hospitalisation costs. © 2012 The Authors. International Wound Journal © 2012 John Wiley & Sons Ltd and Medicalhelplines.com Inc.
The rate of growth in scientific publication and the decline in coverage provided by Science Citation Index.

PubMed

Larsen, Peder Olesen; von Ins, Markus

2010-09-01

The growth rate of scientific publication has been studied from 1907 to 2007 using available data from a number of literature databases, including Science Citation Index (SCI) and Social Sciences Citation Index (SSCI). Traditional scientific publishing, that is publication in peer-reviewed journals, is still increasing although there are big differences between fields. There are no indications that the growth rate has decreased in the last 50 years. At the same time publication using new channels, for example conference proceedings, open archives and home pages, is growing fast. The growth rate for SCI up to 2007 is smaller than for comparable databases. This means that SCI was covering a decreasing part of the traditional scientific literature. There are also clear indications that the coverage by SCI is especially low in some of the scientific areas with the highest growth rate, including computer science and engineering sciences. The role of conference proceedings, open access archives and publications published on the net is increasing, especially in scientific fields with high growth rates, but this has only partially been reflected in the databases. The new publication channels challenge the use of the big databases in measurements of scientific productivity or output and of the growth rate of science. Because of the declining coverage and this challenge it is problematic that SCI has been used and is used as the dominant source for science indicators based on publication and citation numbers. The limited data available for social sciences show that the growth rate in SSCI was remarkably low and indicate that the coverage by SSCI was declining over time. National Science Indicators from Thomson Reuters is based solely on SCI, SSCI and Arts and Humanities Citation Index (AHCI). Therefore the declining coverage of the citation databases problematizes the use of this source.
The rate of growth in scientific publication and the decline in coverage provided by Science Citation Index

PubMed Central

von Ins, Markus

2010-01-01

The growth rate of scientific publication has been studied from 1907 to 2007 using available data from a number of literature databases, including Science Citation Index (SCI) and Social Sciences Citation Index (SSCI). Traditional scientific publishing, that is publication in peer-reviewed journals, is still increasing although there are big differences between fields. There are no indications that the growth rate has decreased in the last 50 years. At the same time publication using new channels, for example conference proceedings, open archives and home pages, is growing fast. The growth rate for SCI up to 2007 is smaller than for comparable databases. This means that SCI was covering a decreasing part of the traditional scientific literature. There are also clear indications that the coverage by SCI is especially low in some of the scientific areas with the highest growth rate, including computer science and engineering sciences. The role of conference proceedings, open access archives and publications published on the net is increasing, especially in scientific fields with high growth rates, but this has only partially been reflected in the databases. The new publication channels challenge the use of the big databases in measurements of scientific productivity or output and of the growth rate of science. Because of the declining coverage and this challenge it is problematic that SCI has been used and is used as the dominant source for science indicators based on publication and citation numbers. The limited data available for social sciences show that the growth rate in SSCI was remarkably low and indicate that the coverage by SSCI was declining over time. National Science Indicators from Thomson Reuters is based solely on SCI, SSCI and Arts and Humanities Citation Index (AHCI). Therefore the declining coverage of the citation databases problematizes the use of this source. PMID:20700371
Linking carbon and iron cycles by investigating transport, fate and mineralogy of iron-bearing colloids from peat-draining rivers - Scotland as model for high-latitude rivers

NASA Astrophysics Data System (ADS)

Wood, Deborah; Crocket, Kirsty; Brand, Tim; Stutter, Marc; Wilson, Clare; Schröder, Christian

2016-04-01

Linking carbon and iron cycles by investigating transport, fate and mineralogy of iron-bearing colloids from peat-draining rivers - Scotland as model for high-latitude rivers Wood, D.A¹, Crocket, K², Brand, T², Stutter, M³, Wilson, C¹ & Schröder, C¹ ¹Biological and Environmental Sciences, University of Stirling, Stirling, FK9 4LA ²Scottish Association for Marine Science, University of the Highlands and Islands, Dunbeg, Oban, PA37 1QA ³James Hutton Institute, Craigiebuckler, Aberdeen, AB15 8QH The biogeochemical iron cycle exerts significant control on the carbon cycle¹. Iron is a limiting nutrient in large areas of the world's oceans and its bioavailability controls CO2 uptake by marine photosynthesizing microorganisms. While atmospheric iron inputs to the open ocean have been extensively measured, global river inputs have likely been underestimated because most major world rivers exhibit extensive iron removal by flocculation and sedimentation during seawater mixing. Iron minerals and organic matter mutually stabilise each other², which results in a 'rusty carbon sink' in sediments³ on the one hand but may also enhance transport beyond the salinity gradient on the other. Humic-rich, high latitude rivers have a higher iron-carrying capacity⁴-⁶ but are underrepresented in iron flux calculations. The West Coast sea lochs in Scotland are fed by predominantly peatland drainage catchments, and the rivers entering the sea lochs carry a high load of organic matter. The short distance between many of these catchments and the coastal ocean facilitates source-to-sea research investigating transport, fate and mineralogy of iron-bearing colloids providing a good analogue for similar high latitude fjordic systems. We use SeaFAST+ICP-MS and Mössbauer spectroscopy to survey trace metal concentrations, with emphasis on iron concentrations, speciation and mineralogy, across salinity gradients. In combination with ultra-filtration techniques, this allows determination of the concentrations and chemical composition of different size fractions of iron-organic matter particles and colloids. We are developing new filtering and enrichment protocols to enable the use of Mössbauer spectroscopy in order to close a gap in the understanding of iron mineralogy in sub-micron particles. Here we will present results from a first sampling campaign in Loch Sunart and its tributaries. Acknowledgements: This is a MASTS-funded PhD project (GSS30). Preliminary work was supported by a SAGES PECRE grant to C.S., and a MASTS Visiting Fellowship award (VF41) to K.C. References: 1. Raiswell and Canfield (2012). The Iron Biogeochemical Cycle Past and Present. Geochemical Perspectives 1(1), 1-220. 2. Schröder et al. The biogeochemical iron cycle and astrobiology. Hyperfine Interactions in press. 3. Lalonde et al. (2012). Preservation of organic matter in sediments promoted by iron. Nature 483, 198-200. 4. Batchelli et al. (2010). Evidence for strong but dynamic iron-humic colloidal associations in humic-rich coastal waters. Environ. Sci. Technol., 44, 8485-8490. 5. Krachler et al. (2010). Relevance of peat-draining rivers for the riverine input of dissolved iron into the ocean. Sci. Total Environ., 408, 2402-2408. 6. Pokrovsky et al. (2014). Fate of colloids during estuarine mixing in the Arctic. Ocean Sci., 10, 107-125.
A multicharge ion source (Supernanogan) for the OLIS facility at ISAC/TRIUMF.

PubMed

Jayamanna, K; Wight, G; Gallop, D; Dube, R; Jovicic, V; Laforge, C; Marchetto, M; Leross, M; Louie, D; Laplante, R; Laxdal, R; McDonald, M; Wiebe, G J; Wang, V; Yan, F

2010-02-01

The Off-Line Ion Source (OLIS) [K. Jayamanna, D. Yuan, T. Kuo, M. MacDonald, P. Schmor, and G. Dutto, Rev. Sci. Instrum. 67, 1061 (1996); K. Jayamanna, Rev. Sci. Instrum. 79, 02711 (2008)] facility consists of a high voltage terminal containing a microwave cusp ion source, either a surface ion source or a hybrid surface-arc discharge ion source [K. Jayamanna and C. Vockenhuber, Rev. Sci. Instrum. 79, 02C712 (2008)], and an electrostatic switch that allows the selection of any one of the sources without mechanical intervention. These sources provide a variety of +1 beams up to mass 30 for Isotope Separator and ACcelerator (ISAC) [R. E. Laxdal, Nucl. Instrum. Methods Phys. Res. B 204, 400 (2003)] experiments, commissioning the accelerators, setting up the radioactive experiments, and for tuning the beam lines. The radio frequency quadrupole (RFQ) [M. Marchetto, Z. T. Ang, K. Jayamanna, R. E. Laxdal, A. Mitra, and V. Zvyagintsev, Eur. Phys. J. Spec. Top. 150, 241 (2005)] injector accelerator is a constant velocity machine designed to accept only 2 keV/u and the source extraction energy is limited to 60 kV. Further stripping is then needed downstream of the RFQ to inject the beam into the drift tube linac [M. Marchetto, Z. T. Ang, K. Jayamanna, R. E. Laxdal, A. Mitra, and V. Zvyagintsev, Eur. Phys. J. Spec. Top. 150, 241 (2005)] accelerator that requires A/q up to 6. Base on this constraints a multicharge ion source capable to deliver beams above mass 30 with A/q up to 6 was needed in order to reach full capability of the ISAC facility. A Supernanogan [C. Bieth et al., Nucleonika 48, S93 (2003)] multicharge ion source was then purchased from Pantechnik and was installed in the OLIS terminal. Commissioning and performance of the Supernanogan with some results such as emittance dependence of the charge states as well as charge state efficiencies are presented.
Study of water quality improvements during riverbank filtration at three midwestern United States drinking water utilities

NASA Astrophysics Data System (ADS)

Weiss, W.; Bouwer, E.; Ball, W.; O'Melia, C.; Lechevallier, M.; Arora, H.; Aboytes, R.; Speth, T.

2003-04-01

Riverbank filtration (RBF) is a process during which surface water is subjected to subsurface flow prior to extraction from wells. During infiltration and soil passage, surface water is subjected to a combination of physical, chemical, and biological processes such as filtration, dilution, sorption, and biodegradation that can significantly improve the raw water quality (Tufenkji et al, 2002; Kuehn and Mueller, 2000; Kivimaki et al, 1998; Stuyfzand, 1998). Transport through alluvial aquifers is associated with a number of water quality benefits, including removal of microbes, pesticides, total and dissolved organic carbon (TOC and DOC), nitrate, and other contaminants (Hiscock and Grischek, 2002; Tufenkji et al., 2002; Ray et al, 2002; Kuehn and Mueller, 2000; Doussan et al, 1997; Cosovic et al, 1996; Juttner, 1995; Miettinen et al, 1994). In comparison to most groundwater sources, alluvial aquifers that are hydraulically connected to rivers are typically easier to exploit (shallow) and more highly productive for drinking water supplies (Doussan et al, 1997). Increased applications of RBF are anticipated as drinking water utilities strive to meet increasingly stringent drinking water regulations, especially with regard to the provision of multiple barriers for protection against microbial pathogens, and with regard to tighter regulations for disinfection by-products (DBPs), such as trihalomethanes (THMs) and haloacetic acids (HAAs). In the above context, research was conducted to document the water quality benefits during RBF at three major river sources in the mid-western United States, specifically with regard to DBP precursor organic matter and microbial pathogens. Specific objectives were to: 1. Evaluate the merits of RBF for removing/controlling DBP precursors and certain other drinking water contaminants (e.g. microorganisms). 2. Evaluate whether RBF can improve finished drinking water quality by removing and/or altering natural organic matter (NOM) in a manner that is not otherwise accomplished through conventional processes of drinking water treatment (e.g. coagulation, flocculation, sedimentation). 3. Evaluate changes in the character of NOM upon ground passage from the river to the wells. The experimental approach entailed monitoring the performance of three different RBF systems along the Ohio, Wabash, and Missouri Rivers in the Midwestern United States and involved a cooperative effort between the American Water Works Company, Inc. and Johns Hopkins University. Samples of the river source waters and the bank-filtered well waters were analyzed for a range of water quality parameters including TOC, DOC, UV-absorbance at 254-nm (UV-254), biodegradable dissolved organic carbon (BDOC), biologically assimilable organic carbon (AOC), inorganic species, DBP formation potential, and microorganisms. In the second year of the project, river waters were subjected to a bench-scale conventional treatment train consisting of coagulation, flocculation, sedimentation, glass-fiber filtration, and ozonation. The treated river waters were compared with the bank-filtered waters in terms of TOC, DOC, UV-254, and DBP formation potential. In the third and fourth years of the project, NOM from the river and well waters was characterized using the XAD-8 resin adsorption fractionation method (Leenheer, 1981; Thurman &Malcolm, 1981). XAD-8 adsorbing (hydrophobic) and non-adsorbing (hydrophilic) fractions of the river and well waters were compared with respect to DOC, UV-254, and DBP formation potential to determine whether RBF alters the character of the source water NOM upon ground passage and if so, which fractions are preferentially removed. The results demonstrate the effectiveness of RBF at removing the organic precursors to potentially carcinogenic DBPs. When compared to a bench-scale conventional treatment train optimized for turbidity removal, RBF performed as well as the treatment at one of the sites and significantly better than the treatment at the other two sites in terms of removal of organic carbon and DBP precursor material. Removals of TOC and DOC upon RBF at the three sites generally ranged from 30 to 70% compared to 20 to 50% removals upon bench-scale treatment of the river waters. Reductions in precursor material for a variety of DBP precursors for trihalomethanes, haloacetic acids, haloacetonitriles, haloketones, chloral hydrate, and chloropicrin upon RBF ranged from 50 to 100% using both the formation potential (FP) and the uniform formation conditions (UFC) tests (Standard Methods, 1998; Summers et al., 1996), while reductions upon bench-scale treatment were generally in the range of 40 to 80%. The significantly higher reductions of the DBP precursors relative to those of TOC and DOC indicate a preferential reduction upon ground passage in the NOM that reacts with chlorine to form DBPs. Upon both bench-scale conventional treatment and RBF, a shift was observed in DBP formation from the chlorinated to the more brominated species due to the removal of DOC relative to bromide upon treatment or RBF. As DOC is removed, the bromide:DOC ratio increases, leading to the formation of more brominated DBPs. The shift was more pronounced upon RBF due to the generally higher reductions in DOC. UFC testing with a constant chlorine:DOC:bromide ratio ruled out the possibility of any significant preferential removal of the NOM precursor material for the more chlorinated DBPs. These results highlight the importance of the bromide ion in the formation of DBPs in drinking water, especially in light of the higher theoretical cancer risk associated with the brominated DBPs. Risk calculations demonstrated the ability of RBF to reduce the theoretical excess cancer risk due to THMs formed upon chlorination, in all cases, and with substantially better performance than the bench-scale treatment train. The characterization studies were carried out to evaluate whether the observed removals of DBP precursor material upon RBF reflected a preferential removal of NOM of particular character. The results of this study indicate that RBF appears to be equally capable of removing material of different character. The different removal mechanisms in the subsurface (e.g. sorption, biodegradation, filtration) combine to provide similar removal of the operationally defined hydrophilic and hydrophobic fractions of organic material upon ground passage. Thus, the reductions in DBP formation upon RBF observed during the first two phases of this research are largely the result of a decrease in the NOM concentration rather than a major shift in the NOM character. Preliminary monitoring of a number of microorganisms indicates that RBF may also serve as a significant barrier for the removal of microbial contaminants, including human pathogens. The monitoring data demonstrated >3 log removal of Clostridium spores and >2 log removal of bacteriophage. Assuming that these indicator organisms can be used as surrogates for Giardia cysts and human enteric viruses, RBF at the three study sites surpassed the performance requirements in the United States for conventional coagulation, sedimentation, and filtration (e.g., 2.5 log removal for Giardia cysts and 2.0 log removal of viruses). References Cosovic, D.; Hrsak, V.; Vojvodic, V.; &Krznaric, D., 1996. Transformation of organic matter and bank filtration from a polluted stream. Wat. Res., 30:12:2921. Doussan, C.; Poitevin, G.; Ledoux, E.; &Detay, M., 1997. River bank filtration: Modeling of the changes in water chemistry with emphasis on nitrogen species, J. Contam. Hydrol., 25:129. Hiscock, K.M. &Grischek, T., 2002. Attenuation of Groundwater Pollution by Bank Filtration. Jour. Hydrol., 266:139. Juttner, F., 1995. Elimination of Terpenoid Odorous Compounds by Slow Sand and River Bank Filtration of the Ruhr River, Germany. Wat. Sci. Tech., 31:11:211. Kivimaki, A-L.; Lahti, K.; Hatva, T.; Tuominen, S.M.; &Miettinen, I.T., 1998. Removal of organic matter during bank filtration. Artificial Recharge of Groundwater (J.H. Peters, editor). A.A. Balkema. Rotterdam, Netherlands; Brookfield, VT. Kuehn, W. &Mueller, U., 2000. Riverbank filtration: an overview. Jour. AWWA, 92:12:60. Leenheer, J.A., 1981. Comprehensive Approach to Preparative Isolation and Fractionation of Dissolved Organic Carbon from Natural Waters and Wastewaters. Environ. Sci. Technol., 15:5:578. Miettinen, I.T.; Martikainen, P.J.; &Vartiainen, T., 1994. Humus Transformation at the Bank Filtration Water Plant. Wat. Sci. Tech., 30:10:179. Ray, C.; Grischek, T.; Schubert, J.; Wang, J.Z.; &Speth, T.F., 2002. A perspective of riverbank filtration. Jour. AWWA, 94:4:149. Standard Methods for the Examination of Water and Wastewater, 1998 (20th ed.). APHA, AWWA, and WEF, Washington. Stuyfzand, P.J., 1998. Fate of pollutants during artificial recharge and bank filtration in the Netherlands. Artificial Recharge of Groundwater (J.H. Peters, editor). A.A. Balkema. Rotterdam, Netherlands; Brookfield, Vermont. Summers, R.S.; Hooper, S.M.; Shukairy, H.M.; Solarik, G.; &Owen, D., 1996. Assessing DBP Yield: Uniform Formation Conditions. Jour. AWWA, 88:6:80. Thurman, E.M. &Malcolm, R.L., 1981. Preparative Isolation of Aquatic Humic Substances. Environ. Sci. Technol., 15:4:463. Tufenkji, N.; Ryan, J.N.; &Elimelech, M., 2002. The Promise of Bank Filtration. Envir. Sci. &Technol., 36:21:423A.
Radium Adsorption to Iron Bearing Minerals in Variable Salinity Waters

NASA Astrophysics Data System (ADS)

Chen, M.; Kocar, B. D.

2014-12-01

Radium is a common, naturally occurring radioactive metal found in many subsurface environments. Radium isotopes are a product of natural uranium and thorium decay, and are particularly abundant within groundwaters where minimal flux leads to accumulation within porewaters. Radium has been used as a natural tracer to estimate submarine groundwater discharge (SGD) [1], where the ratios of various radium isotopes are used to estimate total groundwater flux to and from the ocean [2]. Further, it represents a substantial hazard in waste water produced after hydraulic fracturing for natural gas extraction [3], resulting in a significant risk of environmental release and increased cost for water treatment or disposal. Adsorption to mineral surfaces represents a primary pathway of radium retention within subsurface environments. For SGD studies, it is important to understand adsorption processes to correctly estimate GW fluxes, while in hydraulic fracturing, radium adsorption to aquifer solids will mediate the activities of radium within produced water. While some studies of radium adsorption to various minerals have been performed [4], there is a limited understanding of the surface chemistry of radium adsorption, particularly to iron-bearing minerals such as pyrite, goethite and ferrihydrite. Accordingly, we present the results of sorption experiments of radium to a suite of iron-bearing minerals representative of those found within deep saline and near-surface (freshwater) aquifers, and evaluate impacts of varying salinity solutions through the use of artificial groundwater, seawater, and shale formation brine. Further, we explore the impacts of pyrite oxidation and ferrihydrite transformation to other iron-bearing secondary minerals on the retention of radium. This work lays the groundwork for further study of radium use as a tracer for SGD, as well as understanding mechanisms of radium retention and release from deep aquifer materials following hydraulic fracturing operations. [1] Charette, M.A., Buesseler, K.O. & Andrews, J.E., Limnol. Oceanogr. 46, 465-470 (2001). [2] Moore, W.S., Ann. Rev. Mar. Sci. 2, 59-88 (2010). [3] Vengosh, A., Jackson, R.B., Warner, N., Darrah, T.H. & Kondash, Environ. Sci. Technol., (2014). [4] Ames, L.L, McGarrah, J., & Walker, B., Clays Clay Miner. 31, 335-342 (1983).
Normalization and extension of single-collector efficiency correlation equation

NASA Astrophysics Data System (ADS)

Messina, Francesca; Marchisio, Daniele; Sethi, Rajandrea

2015-04-01

The colloidal transport and deposition are important phenomena involved in many engineering problems. In the environmental engineering field the use of micro- and nano-scale zerovalent iron (M-NZVI) is one of the most promising technologies for groundwater remediation. Colloid deposition is normally studied from a micro scale point of view and the results are then implemented in macro scale models that are used to design field-scale applications. The single collector efficiency concept predicts particles deposition onto a single grain of a complex porous medium in terms of probability that an approaching particle would be retained on the solid grain. In literature, many different approaches and equations exist to predict it, but most of them fail under specific conditions (e.g. very small or very big particle size and very low fluid velocity) because they predict efficiency values exceeding unity. By analysing particle fluxes and deposition mechanisms and performing a mass balance on the entire domain, the traditional definition of efficiency was reformulated and a novel total flux normalized correlation equation is proposed for predicting single-collector efficiency under a broad range of parameters. It has been formulated starting from a combination of Eulerian and Lagrangian numerical simulations, performed under Smoluchowski-Levich conditions, in a geometry which consists of a sphere enveloped by a control volume. In order to guarantee the independence of each term, the correlation equation is derived through a rigorous hierarchical parameter estimation process, accounting for single and mutual interacting transport mechanisms. The correlation equation provides efficiency values lower than one over a wide range of parameters and is valid both for point and finite-size particles. A reduced form is also proposed by elimination of the less relevant terms. References 1. Yao, K. M.; Habibian, M. M.; Omelia, C. R., Water and Waste Water Filtration - Concepts and Applications. Environ Sci Technol 1971, 5, (11), 1105-&. 2. Tufenkji, N., and M. Elimelech, Correlation equation for predicting single-collector efficiency in physicochemical filtration in saturated porous media. Environmental Science & Technology 2004 38(2):529-536. 3. Boccardo, G.; Marchisio, D. L.; Sethi, R., Microscale simulation of particle deposition in porous media. J Colloid Interface Sci 2014, 417, 227-37
Announcing the 2013 Measurement Science and Technology Outstanding Paper Awards

NASA Astrophysics Data System (ADS)

Foss, John; Dewhurst, Richard; Yacoot, Andrew; Tadigadapa, Srinivas; Peters, Kara

2014-07-01

Since 1991, Measurement Science and Technology has awarded a Best Paper prize. The Editorial Board of this journal believe that such a prize is an opportunity to thank authors for submitting their work, and serves as an integral part of the on-going quality review of the journal. The current breadth of topical areas that are covered by MST has made it advisable to expand the recognition of excellent publications. Hence, since 2005 the Editorial Board have presented 'Outstanding Paper Awards'. This year awards were presented in the areas of Fluid Mechanics, Measurement Science, Precision Measurement, Sensors and Sensing Systems, and Optical and Laser-based Techniques. Although the categories mirror subject sections in the journal, the Editorial Board consider articles from all categories in the selection process. 2013 Award Winner—Fluid Mechanics Extraction of skin-friction fields from surface flow visualizations Tianshu Liu Department of Mechanical and Aerospace Engineering, Western Michigan University, Kalamazoo, MI 49008, USA The skin friction or wall shear stress, τ w, for a wall bounded turbulent flow is a quantity of fundamental importance. It is the basis for the wall unit, ν/u τ (kinematic viscosity/friction velocity: [τ w/ρ ]1/2), which establishes the intrinsic length scale in the flow. The selected paper [1] provides a comprehensive review of—and builds upon—prior techniques to obtain τ w values over an area of interest for flow past complex geometries. The quantities that can be measured by optical imaging are shown to be related to the skin friction by the optical flow equation, which in turn is solved numerically as an inverse problem via the variational approach. The paper provides a well defined set of guidelines for other investigators. Detailed examples of skin-friction measurements using luminescent oil films as well as temperature- and pressure-sensitive paints are presented. Quantitative uncertainty estimates are included in the paper. Given the importance of the wall shear stress (skin friction) in fluid mechanics and the notorious difficulty of measuring this quantity directly, this paper is expected to be a seminal contribution. The paper was one of four in the special feature on Wall Shear Stress organized by Professor A Naguib in the December 2013 issue. 2013 Award Winner—Measurement Science Analysis of calibration-free wavelength-scanned wavelength modulation spectroscopy for practical gas sensing using tunable diode lasers K Sun, X Chao, R Sur, C S Goldenstein, J B Jeffries and R K Hanson High Temperature Gasdynamics Laboratory, Department of Mechanical Engineering, Stanford University, Stanford, CA 94305, USA In the previous two years, the Measurement Science Award has gone to important papers in diagnostic fields, namely particle image velocimetry (PIV [2]) and x-ray micro-computed tomographic systems [3]. This year's award [4] goes to another diagnostic field, infrared spectroscopy for practical gas sensing. Infrared spectroscopy is a very important topic for measurement science, concerned with the monitoring of gases in our environment. Over two decades, this form of spectroscopy has been enabled with the development of tunable diode lasers (TDLs). Hence, tunable diode laser absorption spectroscopy (TDLAS) is now an established method for in situ measurements of gas composition, temperature, pressure and velocity. Gases such as ammonia, methane, carbon dioxide and monoxide, hydrogen chloride, hydrogen fluoride and sulfur dioxide can all be monitored by commercially available systems. Some advances have been associated with improvements in infrared detectors or in the properties of some diode lasers. For homogeneous gases, the interpretation using the Beer-Lambert law and direct absorption (DA) is quite straightforward. DA is the preferred method when an absorption line can be found in the infrared region with an isolated transition of sufficient strength, and with a linewidth small enough to allow the laser to be wavelength-scanned on the absorption line, and just off it (as a reference baseline). Otherwise, wavelength modulation spectroscopy (WMS) is used for those cases where the gas offers small absorbance, or high pressure or for absorbers with closely spaced transitions, which are blended in the wings precluding measurement of a non-absorbing baseline. WMS is a powerful technique, but the interpretation is more complex, and the authors explain in their introduction the strategies that are normally adopted for data interpretation. In this new paper, the authors explain a new strategy for wavelength modulation spectroscopy. The strategy is different in two significant ways. Firstly, the measured laser intensity is used to simulate the transmitted laser intensity. Secondly, digital lock-in and low-pass filter software is used to expand both simulated and measured transmitted laser intensities into harmonics of the modulation frequency. In this way, the analysis scheme does not require an isolated transition; instead it recovers the lineshape for absorption from unresolved blended transitions. The paper goes on to describe an example using this novel method. It discusses the analysis of WMS absorption detection using water as an example. The advantages of the new method are explained, and a comparison is made with the more usual Fourier analysis approach. This paper is excellent in its clarity, presentation and scientific description. Issues have been clearly identified, and a new method of analysis has been presented with some evidence of validation. Its conclusions contain an in-depth summary, and the following 42 references are informative and representative of what is a very large field of study. It was voted as the best paper from a shortlist of 12 nominated papers. 2013 Award Winner—Precision Measurement Interferometric diameter determination of a silicon sphere using a traceable single laser frequency synthesizer Xuejian Wu, Yan Li, Haoyun Wei, Honglei Yang, Guoce Yang and Jitao Zhang State Key Lab of Precision Measurement Technology and Instruments, Department of Precision Instrument, Tsinghua University, Beijing 100084, People's Republic of China This paper [5] describes the determination of the absolute diameter of a silicon sphere for the Avogadro project using a phase shifting interferometer based on a flat etalon. The absolute diameter is attained by combining the fractional and integral measurement results, which are measured with phase shifting interferometry and frequency sweeping interferometry using laser frequency tuning, respectively. An optical frequency comb is used as the frequency ruler to measure and control the frequency of an external cavity diode laser in order to reduce the uncertainty contribution from the laser frequency on the phase steps to an insignificant level. The Carré algorithm with arbitrary but equal phase steps is used to calculate the fractional interference phases according to the characteristic of single laser frequency synthesiser. The paper provides a comprehensive description of the measurement techniques together with an uncertainty budget for the measurement of a silicon sphere. An overall measurement uncertainty of 5 nm is achieved. This paper has been downloaded more than 130 times since its publication. The selection committee members on the Precision Measurement Award, Dr A Yacoot, Dr P Williams, Dr H Bosse, Professor X Chen and Dr T Eom, selected this paper from a strongly competitive list of several candidates. Considering its impact on accurate evaluation of the measurement of silicon spheres, the paper was selected as the winner of the Precision Measurement Award for 2013. 2013 Award Winner—Sensors and Sensing Systems Enhancing the dynamic range of ultrasound imaging velocimetry using interleaved imaging C Poelma1 and K H Fraser 2 1Laboratory for Aero and Hydrodynamics (3ME-P&E), Delft University of Technology, Leeghwaterstraat 21, 2628 CA Delft, The Netherlands 2Department of Bioengineering, Imperial College London, South Kensington Campus, SW7 2AZ London, UK This paper [6] presents an innovative interleaved imaging technique to overcome the dynamic velocity range limitation of current ultrasound imaging velocimetry. Due to the nature of the recording of ultrasound images, the conversion from pixel displacement to velocities is less straightforward since the lines of an image are not recorded at the same time, so the inter-frame time needs to be corrected for any displacement. The upper limit of displacement velocities is widely reported in the literature as a major problem with the best measured in-vivo flow rates of ~ 70-80 cm s-1 or by restricting the field of view to as high as 140 cm s-1. In this study, the authors introduce a novel imaging method that enhances the dynamic range of ultrasound imaging velocimetry by an interleaved read-out approach. Using this technique, the inter-frame time is no longer fixed to the imaging rate and allows for the displacement of fast flows to be reduced by choosing an appropriate image offset parameter. The authors show that this technique allows for measurement of flows of up to 140 cm s-1 with the maximum lateral field of view and unrestricted depth. In their winning paper the authors have very clearly articulated the dynamic range limitations of the flow measurement using ultrasound imaging velocimetry and have very elegantly described the theory and experimental implementation of the interleaved imaging technique. The superior performance of the proposed method is clearly demonstrated through experimental results and images analyzed using the necessary mathematical transforms. The improved dynamic flow rate measurements using ultrasound imaging velocimetry made feasible using this technique are likely to have a significant impact on non-invasive blood flow monitoring for clinical screening and post-operative monitoring. 2013 Award Winner—Optical and Laser-based Techniques Detection of excited level population transfer in an MOT through the measurement of trapped atom number. L Moi1, G Batignani1, A Khanbekyan1, K Khanbekyan1, C Marinelli1, E Mariotti1, L Marmugi1, L Corradi2, A Dainelli2, R Calabrese3, G Mazzocca3, L Tomassetti3 and P Minguzzi4 1CNISM, Physics Department, University of Siena, via Roma 56, 53100 Siena, Italy 2INFN—Laboratori Nazionali di Legnaro, viale dell'Università 2, 35020 Legnaro (PD), Italy 3University of Ferrara and INFN, via Saragat 1, 44122 Ferrara, Italy 4CNISM, Physics Department, University of Pisa, largo Pontecorvo 3, 56127 Pisa, Italy The selected paper [7] applies a direct fluorescence detection scheme to monitor the very low number of trapped atoms, simulating the conditions in a francium magneto-optical trap (MOT). Precise atomic parity nonconservation measurements are inherently difficult due to the fact that extremely weak signals must be detected. By scanning a probe beam across a resonance condition and then detecting the MOT fluorescence, the authors were able to monitor the population transfer from the ground level and the first excited level in the MOT. The significance of this work is that it presents a rapid and flexible method to detect the number of trapped atoms in conditions where very low numbers of these atoms are present. Such high precision measurements are essential in nuclear physics and are fundamental to our understanding of nuclear decay processes. We have selected this article for the Best Paper Award because the measurement technique demonstrated is not only innovative, but also flexible to implement as it is wavelength independent and presents a high signal to noise ratio. The experimental configuration was also extremely well documented in the paper, including a detailed estimate of the detection limits. Data were presented for many different excitation mechanisms to show the wide applicability of the measurement technique. It is expected that this innovative measurement strategy will be seen in successful applications of the study of atomic parity nonconservation in different nuclear particles in the near future. The chairmen would like to thank the authors for choosing to publish their work in Measurement Science and Technology , and hope that other researchers enjoy reading these works and feel encouraged to submit their own best work to the journal. References [1] Liu T 2013 Extraction of skin-friction fields from surface flow visualizations as an inverse problem Meas. Sci. Technol 24 124004 [2] Oishi M, Kinoshita H, Fujii T and Oshima M 2011 Simultaneous measurement of internal and surrounding flows of a moving droplet using multicolour confocal micro-particle image velocimetry micro-PIV Meas. Sci. Technol. 22 105401 [3] Hiller J, Maisl M and Reindl L M 2012 Physical characterization and performance evaluation of an x-ray micro-computed tomography system for dimensional metrology applications Meas. Sci. Technol 23 085404 [4] Sun K, Chao X, Sur R, Goldenstein C S, Jeffries J B and Hanson R K 2013 Analysis of calibration-free wavelength-scanned wavelength modulation spectroscopy for practical gas sensing using tunable diode lasers Meas. Sci. Technol 24 125203 [5] Wu X et al 2013 Interferometric diameter determination of a silicon sphere using a traceable single laser frequency synthesizer Meas. Sci. Technol. 24 115202 [6] Poelma C and Fraser K H 2013 Enhancing the dynamic range of ultrasound imaging velocimetry using interleaved imaging Meas. Sci. Technol. 24 115701 [7] Moi L et al 2013 Detection of excited level population transfer in an MOT through the measurement of trapped atom number Meas. Sci. Technol. 24 015201
Image features dependant correlation-weighting function for efficient PRNU based source camera identification.

PubMed

Tiwari, Mayank; Gupta, Bhupendra

2018-04-01

For source camera identification (SCI), photo response non-uniformity (PRNU) has been widely used as the fingerprint of the camera. The PRNU is extracted from the image by applying a de-noising filter then taking the difference between the original image and the de-noised image. However, it is observed that intensity-based features and high-frequency details (edges and texture) of the image, effect quality of the extracted PRNU. This effects correlation calculation and creates problems in SCI. For solving this problem, we propose a weighting function based on image features. We have experimentally identified image features (intensity and high-frequency contents) effect on the estimated PRNU, and then develop a weighting function which gives higher weights to image regions which give reliable PRNU and at the same point it gives comparatively less weights to the image regions which do not give reliable PRNU. Experimental results show that the proposed weighting function is able to improve the accuracy of SCI up to a great extent. Copyright © 2018 Elsevier B.V. All rights reserved.
Ship-borne measurements of microbial enzymatic activity: A rapid biochemical indicator for microbial water quality monitoring

NASA Astrophysics Data System (ADS)

Stadler, Philipp; Loken, Luke; Crawford, John; Schramm, Paul; Sorsa, Kirsti; Kuhn, Catherine; Savio, Domenico; Striegl, Rob; Butman, David; Stanley, Emily; Farnleitner, Andreas H.; Zessner, Matthias

2017-04-01

Contamination of aquatic ecosystems by human and animal wastes is a global concern for water quality. Disclosing fate and transport processes of fecal indicator organism (FIO) in large water bodies is a big challenge due to material intensive and time consuming methods used in microbiological water quality monitoring. In respect of utilization of large surface water resources there is a dearth of rapid microbiological methods that allow a near-real time health related water quality monitoring to be implemented into early warning systems. The detection of enzymatic activities has been proposed as a rapid surrogate for microbiological pollution monitoring of water and water resources (Cabral, 2010; Farnleitner et al., 2001, 2002). Methods such as the beta-D-Glucuronidase assay (GLUC), targeting FIO such as E. coli, were established. New automated enzymatic assays have been implemented during the last years into on-site monitoring stations, ranging from ground- to surface waters (Ryzinska-Paier et al., 2014; Stadler et al., 2017, 2016). While these automated enzymatic methods cannot completely replace assays for culture-based FIO enumeration, they yielded significant information on pollution events and temporal dynamics on a catchment specific basis, but were restricted to stationary measurements. For the first time we conducted ship-borne and automated measurements of enzymatic GLUC activity on large fresh water bodies, including the Columbia River, the Mississippi River and Lake Mendota. Not only are automated enzymatic assays technically feasible from a mobile vessel, but also can be used to localize point sources of potential microbial fecal contamination, such as tributaries or storm drainages. Spatial and temporal patterns of enzymatic activity were disclosed and the habitat specific correlation with microbiological standard assays for FIO determined due to reference samples. The integration of rapid and automated enzymatic assays into well-established systems for ship-borne measurements of physico-chemical parameters, such as the FLAMe (Crawford et al., 2015), paves new ground for data interpretation and process understanding. Cabral, J.P.S., 2010. Water Microbiology. Bacterial Pathogens and Water. Int. J. Environ. Res. Public. Health 7, 3657-3703. doi:10.3390/ijerph7103657 Crawford, J.T., Loken, L.C., Casson, N.J., Smith, C., Stone, A.G., Winslow, L.A., 2015. High-speed limnology: using advanced sensors to investigate spatial variability in biogeochemistry and hydrology. Environ. Sci. Technol. 49, 442-450. doi:10.1021/es504773x Farnleitner, A. h., Hocke, L., Beiwl, C., Kavka, G. c., Zechmeister, T., Kirschner, A. k. t., Mach, R. l., 2001. Rapid enzymatic detection of Escherichia coli contamination in polluted river water. Lett. Appl. Microbiol. 33, 246-250. doi:10.1046/j.1472-765x.2001.00990.x Farnleitner, A.H., Hocke, L., Beiwl, C., Kavka, G.G., Mach, R.L., 2002. Hydrolysis of 4-methylumbelliferyl-β-d-glucuronide in differing sample fractions of river waters and its implication for the detection of fecal pollution. Water Res. 36, 975-981. doi:10.1016/S0043-1354(01)00288-3 Ryzinska-Paier, G., Lendenfeld, T., Correa, K., Stadler, P., Blaschke, A.P., Mach, R.L., Stadler, H., Kirschner, A.K.T., Farnleitner, A.H., 2014. A sensitive and robust method for automated on-line monitoring of enzymatic activities in water and water resources. Water Sci. Technol. J. Int. Assoc. Water Pollut. Res. 69, 1349-1358. doi:10.2166/wst.2014.032 Stadler, P., Blöschl, G., Vogl, W., Koschelnik, J., Epp, M., Lackner, M., Oismüller, M., Kumpan, M., Nemeth, L., Strauss, P., Sommer, R., Ryzinska-Paier, G., Farnleitner, A.H., Zessner, M., 2016. Real-time monitoring of beta-d-glucuronidase activity in sediment laden streams: A comparison of prototypes. Water Res. 101, 252-261. doi:10.1016/j.watres.2016.05.072 Stadler, P., Farnleitner, A.H., Zessner, M., 2017. Development and evaluation of a self-cleaning custom-built auto sampler controlled by a low-cost RaspberryPi microcomputer for online enzymatic activity measurements. Talanta 162, 390-397. doi:10.1016/j.talanta.2016.10.031
Combination of a peptide-modified gellan gum hydrogel with cell therapy in a lumbar spinal cord injury animal model.

PubMed

Gomes, Eduardo D; Mendes, Sofia S; Leite-Almeida, Hugo; Gimble, Jeffrey M; Tam, Roger Y; Shoichet, Molly S; Sousa, Nuno; Silva, Nuno A; Salgado, António J

2016-10-01

Spinal Cord Injury (SCI) is a highly incapacitating condition for which there is still no cure. Current clinical approaches are mainly based on palliative care, so there is a need to find possible treatments to SCI. Cellular transplantation is regarded with great expectation due to the therapeutic potential of cells such as Adipose tissue-derived Stromal/Stem Cells (ASCs) or Olfactory Ensheathing Cells (OECs). Both are accessible sources and present positive paracrine and cell-to-cell interactions, previously reported by our group. Additionally, biomaterials such as hydrogels have been applied in SCI repair with promising results. We propose to combine a GRGDS-modified gellan gum hydrogel with ASCs and OECs in order to promote SCI regeneration. In vitro, ASCs and OECs could be co-cultured within GG-GRGDS hydrogels inducing a more robust neurite outgrowth when compared to controls. In vivo experiments in a hemisection SCI rat model revealed that the administration of ASCs and OECs encapsulated in a GG-GRGDS hydrogel led to significant motor improvements when compared to both control (SCI) and hydrogel alone (GG-GRGDS) groups. This was accompanied by a decreased infiltration of inflammatory cells and astrocytes, and by an increased intensity of neurofilament. These results suggest evident gains induced by the encapsulation of ASCs and OECs in GG-GRGDS based hydrogels. Copyright © 2016 Elsevier Ltd. All rights reserved.
Effectiveness of dietary supplements in spinal cord injury subjects.

PubMed

Navarrete-Opazo, Angela; Cuitiño, Pilar; Salas, Inés

2017-04-01

Individuals with spinal cord injury (SCI) consume more dietary supplements than the general population. However, there is limited information regarding the clinical effectiveness of dietary supplements in SCI population. To systematically review the effectiveness of dietary supplements for the prevention or treatment of health-related conditions associated with SCI. Randomized or non-randomized controlled clinical trials were selected, comparing the effect of any dose and form of a dietary supplement (defined by the Dietary Supplement Health and Education Act), with either no treatment, placebo, or other medication. Data Sources included the Cochrane Database, DARE, LILACS, CINAHL, EMBASE, MEDLINE, OTSeeker, PEDro, PsycINFO, SpeechBITE, ScienceDirect, Scopus, clinicaltrials.gov, Google Scholar, and OpenGrey. Two reviewers independently classified articles from January 1970 through October 2015, and 18 articles were selected. Due to the heterogeneity of outcome measures across studies, a meta-analysis was not conducted. However, high-quality evidence showed that cranberry supplementation is not effective for prevention of urinary tract infections (UTIs) in SCI. Moderate-quality evidence supported a beneficial effect of vitamin D, alpha-lipoic acid, and omega-3 supplementation, although replication of results is needed. There were conflicting results for the effect of creatine supplementation on improvement of motor outcomes. Low-quality evidence does not permit assessment of the effectiveness of melatonin, whey protein, vitamin C, and Chinese herb in SCI. There is sufficient data suggesting that cranberry supplementation is ineffective for prevention of UTIs in individuals with SCI. There is insufficient data to support or refute the use of any other dietary supplement in individuals with SCI. Copyright © 2016 Elsevier Inc. All rights reserved.
Lack of knowledge and training are the major obstacles in application of the Spinal Cord Independence Measure (SCIM) in China.

PubMed

Liu, Nan; Xing, Huayi; Zhou, Mouwang; Biering-Sørensen, Fin

2018-03-29

Objective To investigate the use of functional outcome measurements after spinal cord injury (SCI) in current clinical practice and to explore the knowledge about the Spinal Cord Independence Measure (SCIM) among SCI physicians in China, and to find facilitators for a broader utilization of SCIM. Design A survey-based study. Setting SCI workshops at Peking University. Participants 125 Chinese SCI physicians attending annual workshops in two consecutive years. Interventions Not applicable. Outcome measures A questionnaire was administered. The following items were included: whether functional outcome measurement for SCI individuals was performed and with which assessment tool(s); what items should be included in the assessment; whether they knew about the SCIM, its latest version, the Chinese translation, and if so from what source; the possible reasons why SCIM was not implemented in clinical practice; and whether training before using the SCIM was needed, and the training method preferred. Results Among these physicians, 84.8% performed functional outcome measurement for individuals with SCI, but only 29.6% of attendees were aware of the SCIM and 20.8% had used it. Lack of training was the major reason why SCIM was not used in clinical practice. Furthermore, 74.4% of the physicians felt they needed formal training before using the SCIM. Conclusion The use of SCIM is limited in clinical practice in China, which is mainly attributed to lack of knowledge and training. Formal training on the use of the SCIM is essential for its dissemination and will improve functional SCI outcome measurement in China.
Daniel J. Schell | NREL

Science.gov Websites

processing High solids biomass conversion Fermentation process development Separation processes Techno ; Bioresour. Technol. (2010) "An economic comparison of different fermentation configurations to convert
The strongest magnetic barrier in the DIII-D tokamak and comparison with the ASDEX UG

NASA Astrophysics Data System (ADS)

Ali, Halima; Punjabi, Alkesh

2013-05-01

Magnetic perturbations in tokamaks lead to the formation of magnetic islands, chaotic field lines, and the destruction of flux surfaces. Controlling or reducing transport along chaotic field lines is a key challenge in magnetically confined fusion plasmas. A local control method was proposed by Chandre et al. [Nucl. Fusion 46, 33-45 (2006)] to build barriers to magnetic field line diffusion by addition of a small second-order control term localized in the phase space to the field line Hamiltonian. Formation and existence of such magnetic barriers in Ohmically heated tokamaks (OHT), ASDEX UG and piecewise analytic DIII-D [Luxon, J.L.; Davis, L.E., Fusion Technol. 8, 441 (1985)] plasma equilibria was predicted by the authors [Ali, H.; Punjabi, A., Plasma Phys. Control. Fusion 49, 1565-1582 (2007)]. Very recently, this prediction for the DIII-D has been corroborated [Volpe, F.A., et al., Nucl. Fusion 52, 054017 (2012)] by field-line tracing calculations, using experimentally constrained Equilibrium Fit (EFIT) [Lao, et al., Nucl. Fusion 25, 1611 (1985)] DIII-D equilibria perturbed to include the vacuum field from the internal coils utilized in the experiments. This second-order approach is applied to the DIII-D tokamak to build noble irrational magnetic barriers inside the chaos created by the locked resonant magnetic perturbations (RMPs) (m, n)=(3, 1)+(4, 1), with m and n the poloidal and toroidal mode numbers of the Fourier expansion of the magnetic perturbation with amplitude δ. A piecewise, analytic, accurate, axisymmetric generating function for the trajectories of magnetic field lines in the DIII-D is constructed in magnetic coordinates from the experimental EFIT Grad-Shafranov solver [Lao, L, et al., Fusion Sci. Technol. 48, 968 (2005)] for the shot 115,467 at 3000 ms in the DIII-D. A symplectic mathematical map is used to integrate field lines in the DIII-D. A numerical algorithm [Ali, H., et al., Radiat. Eff. Def. Solids Inc. Plasma Sc. Plasma Tech. 165, 83 (2010)] based on continued fraction decomposition of the rotational transform labeling the barriers for selecting and identifying the strongest noble irrational barrier is used. The results are compared and contrasted with our previous results on the ASDEX UG. About six times stronger a barrier can be built in the DIII-D than in the ASDEX UG. High magnetic shear near the separatrix in the DIII-D is inferred as the possible cause of this. Implications of this for the DIII-D and the International Thermonuclear Experimental Reactor (ITER) are discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Metzler, Dominik; Oehrlein, Gottlieb S., E-mail: oehrlein@umd.edu; Li, Chen

The need for atomic layer etching (ALE) is steadily increasing as smaller critical dimensions and pitches are required in device patterning. A flux-control based cyclic Ar/C{sub 4}F{sub 8} ALE based on steady-state Ar plasma in conjunction with periodic, precise C{sub 4}F{sub 8} injection and synchronized plasma-based low energy Ar{sup +} ion bombardment has been established for SiO{sub 2} [Metzler et al., J. Vac. Sci. Technol. A 32, 020603 (2014)]. In this work, the cyclic process is further characterized and extended to ALE of silicon under similar process conditions. The use of CHF{sub 3} as a precursor is examined and comparedmore » to C{sub 4}F{sub 8}. CHF{sub 3} is shown to enable selective SiO{sub 2}/Si etching using a fluorocarbon (FC) film build up. Other critical process parameters investigated are the FC film thickness deposited per cycle, the ion energy, and the etch step length. Etching behavior and mechanisms are studied using in situ real time ellipsometry and x-ray photoelectron spectroscopy. Silicon ALE shows less self-limitation than silicon oxide due to higher physical sputtering rates for the maximum ion energies used in this work, ranged from 20 to 30 eV. The surface chemistry is found to contain fluorinated silicon oxide during the etching of silicon. Plasma parameters during ALE are studied using a Langmuir probe and establish the impact of precursor addition on plasma properties.« less
On a novel low cost high accuracy experimental setup for tomographic particle image velocimetry

NASA Astrophysics Data System (ADS)

Discetti, Stefano; Ianiro, Andrea; Astarita, Tommaso; Cardone, Gennaro

2013-07-01

This work deals with the critical aspects related to cost reduction of a Tomo PIV setup and to the bias errors introduced in the velocity measurements by the coherent motion of the ghost particles. The proposed solution consists of using two independent imaging systems composed of three (or more) low speed single frame cameras, which can be up to ten times cheaper than double shutter cameras with the same image quality. Each imaging system is used to reconstruct a particle distribution in the same measurement region, relative to the first and the second exposure, respectively. The reconstructed volumes are then interrogated by cross-correlation in order to obtain the measured velocity field, as in the standard tomographic PIV implementation. Moreover, differently from tomographic PIV, the ghost particle distributions of the two exposures are uncorrelated, since their spatial distribution is camera orientation dependent. For this reason, the proposed solution promises more accurate results, without the bias effect of the coherent ghost particles motion. Guidelines for the implementation and the application of the present method are proposed. The performances are assessed with a parametric study on synthetic experiments. The proposed low cost system produces a much lower modulation with respect to an equivalent three-camera system. Furthermore, the potential accuracy improvement using the Motion Tracking Enhanced MART (Novara et al 2010 Meas. Sci. Technol. 21 035401) is much higher than in the case of the standard implementation of tomographic PIV.
Comparing simulation of plasma turbulence with experiment

NASA Astrophysics Data System (ADS)

Ross, David W.; Bravenec, Ronald V.; Dorland, William; Beer, Michael A.; Hammett, G. W.; McKee, George R.; Fonck, Raymond J.; Murakami, Masanori; Burrell, Keith H.; Jackson, Gary L.; Staebler, Gary M.

2002-01-01

The direct quantitative correspondence between theoretical predictions and the measured plasma fluctuations and transport is tested by performing nonlinear gyro-Landau-fluid simulations with the GRYFFIN (or ITG) code [W. Dorland and G. W. Hammett, Phys. Fluids B 5, 812 (1993); M. A. Beer and G. W. Hammett, Phys. Plasmas 3, 4046 (1996)]. In an L-mode reference discharge in the DIII-D tokamak [J. L. Luxon and L. G. Davis, Fusion Technol. 8, 441 (1985)], which has relatively large fluctuations and transport, the turbulence is dominated by ion temperature gradient (ITG) modes. Trapped electron modes and impurity drift waves also play a role. Density fluctuations are measured by beam emission spectroscopy [R. J. Fonck, P. A. Duperrex, and S. F. Paul, Rev. Sci. Instrum. 61, 3487 (1990)]. Experimental fluxes and corresponding diffusivities are analyzed by the TRANSP code [R. J. Hawryluk, in Physics of Plasmas Close to Thermonuclear Conditions, edited by B. Coppi, G. G. Leotta, D. Pfirsch, R. Pozzoli, and E. Sindoni (Pergamon, Oxford, 1980), Vol. 1, p. 19]. The shape of the simulated wave number spectrum is close to the measured one. The simulated ion thermal transport, corrected for E×B low shear, exceeds the experimental value by a factor of 1.5 to 2.0. The simulation overestimates the density fluctuation level by an even larger factor. On the other hand, the simulation underestimates the electron thermal transport, which may be accounted for by modes that are not accessible to the simulation or to the BES measurement.
EDITORIAL: Award for Patrick Gill

NASA Astrophysics Data System (ADS)

Hauptmann, Peter

2007-12-01

On behalf of the journal I would like to congratulate Professor Patrick Gill, a long-serving member of the Editorial Board for Measurement Science and Technology, who has been awarded the prestigious Institute of Physics Young medal and prize for world-leading contributions to optical frequency metrology. He is recognized as the UK leader in the quest for very accurate optical clocks. Professor Gill's work is concerned with the development of cold trapped ion systems as optical frequency standards with potential for future redefinition of the SI second, and the frequency metrology needed to relate optical and microwave standards to high accuracy. Interested readers may wish to read a short review of the wider state-of-the-art development of single cold trapped ion frequency standards, coupled with a more detailed account of results achieved at the National Physical Laboratory, written by Professor Gill and co-workers from NPL: ''Trapped ion optical frequency standards'' by P Gill, G P Barwood, H A Klein, G Huang, S A Webster, P J Blythe, K Hosaka, S N Lea and H S Margolis 2003 Meas. Sci. Technol. 14 (8) 1174-86 He was one of the very early developers of the frequency comb idea, and in 2004 he led an experiment where the femtosecond laser frequency comb measured the prototype optical clock frequency, based on a strontium-ion optical transition, with accuracy close to the capability of the best caesium microwave clocks. Once again I congratulate Professor Gill and wish him every success for his future work.
Atmospheric H2O2 measurement: comparison of cold trap method with impinger bubbling method

NASA Technical Reports Server (NTRS)

Sakugawa, H.; Kaplan, I. R.

1987-01-01

Collection of atmospheric H2O2 was performed by a cold trap method using dry ice-acetone as the refrigerant. The air was drawn by a pump into a glass gas trap immersed in the dry ice-acetone slush in a dewar flask at a flow rate of 2.5 l min-1 for approximately 2 h. Collection efficiency was > 99% and negligible interferences by O3, SO2 or organic matter with the collected H2O2 in the trap were observed. This method was compared with the air impinger bubbling method which has been previously described (Kok et al., 1978a, b, Envir. Sci. Technol. 12, 1072-1080). The measured total peroxide (H2O2 + organic peroxide) values in a series of aim samples collected by the impinger bubbling method (0.06-3.7 ppb) were always higher than those obtained by the cold trap method (0.02-1.2 ppb). Laboratory experiments suggest that the difference in values between the two methods probably results from the aqueous phase generation of H2O2 and organic peroxide in the impinger solution by a reaction of atmospheric O3 with olefinic and aromatic compounds. If these O3-organic compound reactions which occur in the impinger also occur in aqueous droplets in the atmosphere, the process could be very important for aqueous phase generation of H2O2 in clouds and rainwater.
Demonstrating the Value of Fine-resolution Optical Data for Minimising Aliasing Impacts on Biogeochemical Models of Surface Waters

NASA Astrophysics Data System (ADS)

Chappell, N. A.; Jones, T.; Young, P.; Krishnaswamy, J.

2015-12-01

There is increasing awareness that under-sampling may have resulted in the omission of important physicochemical information present in water quality signatures of surface waters - thereby affecting interpretation of biogeochemical processes. For dissolved organic carbon (DOC) and nitrogen this under-sampling can now be avoided using UV-visible spectroscopy measured in-situ and continuously at a fine-resolution e.g. 15 minutes ("real time"). Few methods are available to extract biogeochemical process information directly from such high-frequency data. Jones, Chappell & Tych (2014 Environ Sci Technol: 13289-97) developed one such method using optically-derived DOC data based upon a sophisticated time-series modelling tool. Within this presentation we extend the methodology to quantify the minimum sampling interval required to avoid distortion of model structures and parameters that describe fundamental biogeochemical processes. This shifting of parameters which results from under-sampling is called "aliasing". We demonstrate that storm dynamics at a variety of sites dominate over diurnal and seasonal changes and that these must be characterised by sampling that may be sub-hourly to avoid aliasing. This is considerably shorter than that used by other water quality studies examining aliasing (e.g. Kirchner 2005 Phys Rev: 069902). The modelling approach presented is being developed into a generic tool to calculate the minimum sampling for water quality monitoring in systems driven primarily by hydrology. This is illustrated with fine-resolution, optical data from watersheds in temperate Europe through to the humid tropics.
Simulations of stress evolution and the current density scaling of electromigration-induced failure times in pure and alloyed interconnects

NASA Astrophysics Data System (ADS)

Park, Young-Joon; Andleigh, Vaibhav K.; Thompson, Carl V.

1999-04-01

An electromigration model is developed to simulate the reliability of Al and Al-Cu interconnects. A polynomial expression for the free energy of solution by Murray [Int. Met. Rev. 30, 211 (1985)] was used to calculate the chemical potential for Al and Cu while the diffusivities were defined based on a Cu-trapping model by Rosenberg [J. Vac. Sci. Technol. 9, 263 (1972)]. The effects of Cu on stress evolution and lifetime were investigated in all-bamboo and near-bamboo stud-to-stud structures. In addition, the significance of the effect of mechanical stress on the diffusivity of both Al and Cu was determined in all-bamboo and near-bamboo lines. The void nucleation and growth process was simulated in 200 μm, stud-to-stud lines. Current density scaling behavior for void-nucleation-limited failure and void-growth-limited failure modes was simulated in long, stud-to-stud lines. Current density exponents of both n=2 for void nucleation and n=1 for void growth failure modes were found in both pure Al and Al-Cu lines. Limitations of the most widely used current density scaling law (Black's equation) in the analysis of the reliability of stud-to-stud lines are discussed. By modifying the input materials properties used in this model (when they are known), this model can be adapted to predict the reliability of other interconnect materials such as pure Cu and Cu alloys.
Image simulation and surface reconstruction of undercut features in atomic force microscopy

NASA Astrophysics Data System (ADS)

Qian, Xiaoping; Villarrubia, John; Tian, Fenglei; Dixson, Ronald

2007-03-01

CD-AFMs (critical dimension atomic force microscopes) are instruments with servo-control of the tip in more than one direction. With appropriately "boot-shaped" or flared tips, such instruments can image vertical or even undercut features. As with any AFM, the image is a dilation of the sample shape with the tip shape. Accurate extraction of the CD requires a correction for the tip effect. Analytical methods to correct images for the tip shape have been available for some time for the traditional (vertical feedback only) AFMs, but were until recently unavailable for instruments with multi-dimensional feedback. Dahlen et al. [J. Vac. Sci. Technol. B23, pp. 2297-2303, (2005)] recently introduced a swept-volume approach, implemented for 2-dimensional (2D) feedback. It permits image simulation and sample reconstruction, techniques previously developed for the traditional instruments, to be extended for the newer tools. We have introduced [X. Qian and J. S. Villarrubia, Ultramicroscopy, in press] an alternative dexel-based method, that does the same in either 2D or 3D. This paper describes the application of this method to sample shapes of interest in semiconductor manufacturing. When the tip shape is known (e.g., by prior measurement using a tip characterizer) a 3D sample surface may be reconstructed from its 3D image. Basing the CD measurement upon such a reconstruction is shown here to remove some measurement artifacts that are not removed (or are incompletely removed) by the existing measurement procedures.
Shrinkage strain-rates of dental resin-monomer and composite systems.

PubMed

Atai, Mohammad; Watts, David C; Atai, Zahra

2005-08-01

The purpose of this study was to investigate the shrinkage strain rate of different monomers, which are commonly used in dental composites and the effect of monomer functionality and molecular mass on the rate. Bis-GMA, TEGDMA, UDMA, MMA, HEMA, HPMA and different ratios of Bis-GMA/TEGDMA were mixed with Camphorquinone and Dimethyl aminoethyle methacrylate as initiator system. The shrinkage strain of the samples photopolymerised at Ca. 550 mW/cm2 and 23 degrees C was measured using the bonded-disk technique of Watts and Cash (Meas. Sci. Technol. 2 (1991) 788-794), and initial shrinkage-strain rates were obtained by numerical differentiation. Shrinkage-strain rates rose rapidly to a maximum, and then fell rapidly upon vitrification. Strain and initial strain rate were dependent upon monomer functionality, molecular mass and viscosity. Strain rates were correlated with Bis-GMA in Bis-GMA/TEGDMA mixtures up to 75-80 w/w%, due to the higher molecular mass of Bis-GMA affecting termination reactions, and then decreased due to its higher viscosity affecting propagation reactions. Monofunctional monomers exhibited lower rates. UDMA, a difunctional monomer of medium viscosity, showed the highest shrinkage strain rate (P < 0.05). Shrinkage strain rate, related to polymerization rate, is an important factor affecting the biomechanics and marginal integrity of composites cured in dental cavities. This study shows how this is related to monomer molecular structure and viscosity. The results are significant for the production, optimization and clinical application of dental composite restoratives.
Capture efficiency of cooking-related fine and ultrafine particles by residential exhaust hoods.

PubMed

Lunden, M M; Delp, W W; Singer, B C

2015-02-01

Effective exhaust hoods can mitigate the indoor air quality impacts of pollutant emissions from residential cooking. This study reports capture efficiencies (CE) measured for cooking-generated particles for scripted cooking procedures in a 121-m3 chamber with kitchenette. CEs also were measured for burner produced CO2 during cooking and separately for pots and pans containing water. The study used four exhaust hoods previously tested by Delp and Singer (Environ. Sci. Technol., 2012, 46, 6167-6173). For pan-frying a hamburger over medium heat on the back burner, CEs for particles were similar to those for burner produced CO2 and mostly above 80%. For stir-frying green beans in a wok (high heat, front burner), CEs for burner CO2 during cooking varied by hood and airflow: CEs were 34-38% for low (51-68 l/s) and 54-72% for high (109-138 l/s) settings. CEs for 0.3-2.0 μm particles during front burner stir-frying were 3-11% on low and 16-70% on high settings. Results indicate that CEs measured for burner CO2 are not predictive of CEs of cooking-generated particles under all conditions, but they may be suitable to identify devices with CEs above 80% both for burner combustion products and for cooking-related particles. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.
Femtosecond pulsed laser deposition of amorphous, ultrahard boride thin films

NASA Astrophysics Data System (ADS)

Stock, Michael; Molian, Pal

2004-05-01

Amorphous thin films (300-500 nm) of ultrahard AlMgB10 with oxygen and carbon impurities were grown on Si (100) substrates at 300 K using a solid target of AlMgB14 containing a spinel phase (MgAl2O4) and using a 120 fs pulsed, 800 nm wavelength Ti:sapphire laser. The films were subsequently annealed in argon gas up to 1373 K for 2 h. Scanning electron microscopy (SEM) was used to examine the particulate formation, atomic force microscopy was employed to characterize the film surface topography, x-ray diffraction and transmission electron microscopy were used to determine the microstructure, x-ray photoelectron spectroscopy was performed to examine the film composition, and nanoindentation was employed to study the hardness of thin films. The as-deposited and postannealed films (up to 1273 K) had a stochiometry of AlMgB10 with a significant amount of oxygen and carbon impurities and exhibited amorphous structures for a maximum hardness of 40+/-3 GPa. However, postannealing at higher temperatures led to crystallization and transformation of the film to SiB6 with a substantial loss in hardness. Results are also compared with our previous study on 23 ns, 248 nm wavelength (KrF excimer) pulsed laser deposition of AlMgB14 reported in this journal [Y. Tian, A. Constant, C. C. H. Lo, J. W. Anderegg, A. M. Russell, J. E. Snyder, and P. A. Molian, J. Vac. Sci. Technol. A 21, 1055 (2003)]. .
Understanding N2O sources and sinks with laser based isotopic analysis

NASA Astrophysics Data System (ADS)

Mohn, Joachim; Harris, Eliza; Tuzson, Béla; Emmenegger, Lukas

2015-04-01

Nitrous oxide (N2O) is a potent greenhouse gas and the strongest ozone-destroying substance. The main emissions of N2O are linked to different microbial processes, therefore the sources are disperse and highly variable, complicating the development of effective mitigation strategies. Isotopic measurements have great potential to unravel spatial and temporal variations in sources, sinks and chemistry of N2O. Recent developments in quantum cascade laser spectroscopy (QCLAS) [1] allow both the intermolecular distribution of 15N substitutions ('site preference'; 15N14N16O versus 14N15N16O) and the oxygen isotopic composition (d18O) of N2O to be measured in real-time and at high precision of <0.2 ‰ [2]. Additionally, N2O isotopic analysis by QCLAS has demonstrated excellent compatibility to the standard technique isotope-ratio mass-spectrometry [3]. In a number of laboratory and pilot plant studies we investigated the isotopic signature of distinct microbial and abiotic N2O production and consumption pathways in soil and aqueous solution [e.g. 4]. Specific pathways were favoured by selection of the nitrogen substrates and process conditions and their isotopic signatures identified by real-time laser spectroscopic analysis. Results from our laboratory studies are in accordance with pure culture experiments and can therefore be applied to other ecosystems. Recently, high precision isotopic analysis at ambient N2O is also feasible by combining laser spectroscopy with automated preconcentration [5]. The field deployment was demonstrated by real-time monitoring isotopic composition of N2O emissions from an intensively managed grassland in central Switzerland for three months. The responses of the N2O isotopic signatures were analysed with respect to management events and weather influences [2]. In a follow-up project we intend to combine real-time N2O isotopic analysis at a tall tower in central Switzerland with atmospheric transport simulations and a biogeochemical model of surface fluxes of N2O isotopomers. The working hypothesis is that this approach will allow us to quantify regional N2O sources, identify emission hot spots, and constrain source processes, which will be of upmost importance for developing targeted mitigation options. References: [1] H. Wächter, J. Mohn, B. Tuzson, L. Emmenegger, M. W. Sigrist, Opt. Express (2008), 16, 9239-9244. [2] B. Wolf, L. Merbold, C. Decock, B. Tuzson, E. Harris, J. Six, L. Emmenegger, J. Mohn, Biogeosci. Discuss. (2015), accepted. [3] J. Mohn et al., Rapid Commun. Mass Spectrom. (2014) 28, 1995-2007. [4] P. Wunderlin, M. F. Lehmann, H. Siegrist, B. Tuzson, A. Joss, L. Emmenegger, J. Mohn, Environ. Sci. Technol. (2013), 47, 1339-1348. [5] J. Mohn, B. Tuzson, A. Manninen, N. Yoshida, S. Toyoda, W. A. Brand, L. Emmenegger, Atmos. Meas. Tech. (2012), 5, 1601-1609.
Biogeochemial modeling of biodegradation and stable isotope fractionation of DCE in a small-scale wetland

NASA Astrophysics Data System (ADS)

Alvarez-Zaldívar, Pablo; Imfeld, Gwenaël; Maier, Uli; Centler, Florian; Thullner, Martin

2013-04-01

In recent years, the use of (constructed) wetlands has gained significant attention for the in situ remediation of groundwater contaminated with (chlorinated) organic hydrocarbons. Although many sophisticated experimental methods exist for the assessment of contaminant removal in such wetlands the understanding how changes in wetland hydrochemistry affect the removal processes is still limited. This knowledge gap might be reduced by the use of biogeochemical reactive transport models. This study presents the reactive transport simulation of a small-scale constructed wetland treated with groundwater containing cis-1,2-dichloroethene (cDCE). Simulated processes consider different cDCE biodegradation pathways and the associated carbon isotope fractionation, a set of further (bio)geochemical processes as well as the activity of the plant roots. Spatio-temporal hydrochemical and isotope data from a long-term constructed wetland experiment [1] are used to constrain the model. Simulation results for the initial oxic phase of the wetland experiment indicate carbon isotope enrichment factors typical for cometabolic DCE oxidation, which suggests that aerobic treatment of cDCE is not an optimal remediation strategy. For the later anoxic phase of the experiment model derived enrichment factors indicate reductive dechlorination pathways. This degradation is promoted at all wetland depths by a sufficient availability of electron donor and carbon sources from root exudates, which makes the anoxic treatment of groundwater in such wetlands an effective remediation strategy. In combination with the previous experimental data results from this study suggest that constructed wetlands are viable remediation means for the treatment of cDCE contaminated groundwater. Reactive transport models can improve the understanding of the factors controlling chlorinated ethenes removal, and the used model approach would also allow for an optimization of the wetland operation needed for a complete degradation of these contaminants. [1] Imfeld, G., Aragonés, C., Zeiger, S., von Eckstädt, C., Paschke, H., Trabitzsch, R., Weiss, H., and Richnow, H. (2008). Tracking in situ biodegradation of 1,2-dicholoroethenes in a model wetland. Environ. Sci. Technol., 42: 7924-7930.
Applicability of rapid and on-site measured enzyme activity for surface water quality monitoring in an agricultural catchment

NASA Astrophysics Data System (ADS)

Stadler, Philipp; Farnleitner, Andreas H.; Sommer, Regina; Kumpan, Monika; Zessner, Matthias

2014-05-01

For the near real time and on-site detection of microbiological fecal pollution of water, the measurement of beta-D- Glucuronidase (GLUC) enzymatic activity has been suggested as a surrogate parameter and has been already successfully operated for water quality monitoring of ground water resources (Ryzinska-Paier et al. 2014). Due to possible short measure intervals of three hours, this method has high potential as a water quality monitoring tool. While cultivation based standard determination takes more than one working day (Cabral 2010) the potential advantage of detecting the GLUC activity is the high temporal measuring resolution. Yet, there is still a big gap of knowledge on the fecal indication capacity of GLUC (specificity, sensitivity, persistence, etc.) in relation to potential pollution sources and catchment conditions (Cabral 2010, Ryzinska-Paier et al. 2014). Furthermore surface waters are a big challenge for automated detection devices in a technical point of view due to the high sediment load during event conditions. This presentation shows results gained form two years of monitoring in an experimental catchment (HOAL) dominated by agricultural land use. Two enzymatic measurement devices are operated parallel at the catchment outlet to test the reproducibility and precision of the method. Data from continuous GLUC monitoring under both base flow and event conditions is compared with reference samples analyzed by standardized laboratory methods for fecal pollution detection (e.g. ISO 16649-1, Colilert18). It is shown that rapid enzymatic on-site GLUC determination can successfully be operated from a technical point of view for surface water quality monitoring under the observed catchment conditions. The comparison of enzyme activity with microbiological standard analytics reveals distinct differences in the dynamic of the signals during event conditions. Cabral J. P. S. (2010) "Water Microbiology. Bacterial Pathogens and Water" International Journal of Environmental Research and Public Health 7 (10): 3657-3703. Ryzinska-Paier, G., T. Lendenfeld, K. Correa, P. Stadler, A.P. Blaschke, R. L. Mach, H. Stadler, AKT Kirschner und A.H. Farnleitner (2014) A sensitive and robust method for automated on-line monitoring of enzymatic activities in water and water resources. Water Sci. Technol. in press
Formation of nitro-PAHs from the heterogeneous reaction of ambient particle-bound PAHs with NO3/N2O5

NASA Astrophysics Data System (ADS)

Zimmermann, K.; Jariyasopit, N.; Simonich, S. L.; Atkinson, R.; Arey, J.

2012-12-01

Polycyclic aromatic hydrocarbons (PAHs) and their nitrated derivatives (nitro-PAHs) have been shown to be mutagenic in bacterial and mammalian assays and are classified as probable human carcinogens. Semi-volatile PAHs partition between the gas and particulate phases, depending on their liquid-phase vapor pressures and ambient temperatures. These PAHs have been extensively measured in ambient particulate matter and can ultimately undergo long-range transport from source regions (e.g., China to the western USA) (1). During transport these particle-bound PAHs may undergo reaction with NO3/N2O5 to form nitro-PAH derivatives. Previous studies of heterogeneous nitration of PAHs have used particles composed of graphite, diesel soot, and wood smoke (2-4). This study investigates the heterogeneous formation of nitro-PAHs from ambient particle-bound PAHs from Beijing, China and sites located within the Los Angeles air basin. These ambient particle samples, along with filters coated with isotopically labeled PAHs, were exposed to a mix of NO2/NO3/N2O5 in a 7000 L Teflon chamber, with analysis focused on the heterogeneous formation of molecular weight 247 and 273 nitro-PAHs. The heterogeneous formation of certain nitro-PAHs (including1-nitropyrene and 1- and 2-nitrotriphenylene) was observed for some, but not all, ambient samples. Formation of nitro-PAHs typically formed through gas-phase reactions (2-nitrofluoranthene and 2-nitropyrene) was not observed. The effect of particle age and local photochemical conditions during sampling on the degree of nitration in environmental chamber reactions, as well as ambient implications, will be presented. 1. Primbs, T.; Simonich, S.; Schmedding, D.; Wilson, G.; Jaffe, D.; Takami, A.; Kato, S.; Hatakeyama, S.; Kajii, Y. Environ. Sci. Technol. 2007, 41, 3551-3558. 2. Esteve, W.; Budzinski, H.; Villenave, E. Atmospheric Environment 2004, 38, 6063-6072. 3. Nguyen, M.; Bedjanian, Y.; Guilloteau, A. Journal of Atmospheric Chemistry 2009, 62, 139-150. 4. Kamens, R. M.; Zhi-Hua, F.; Yao, Y.; Chen, D.; Chen, S.; Vartiainen, M. Chemosphere 1994, 28, 1623-1632.
Continuous monitoring of dissolved gases with membrane inlet mass spectrometry to fingerprint river biochemical activity

NASA Astrophysics Data System (ADS)

Vautier, Camille; Chatton, Eliot; Abbott, Benjamin; Harjung, Astrid; Labasque, Thierry; Guillou, Aurélie; Pannard, Alexandrine; Piscart, Christophe; Laverman, Anniet; Kolbe, Tamara; Massé, Stéphanie; de Dreuzy, Jean-Raynald; Thomas, Zahra; Aquilina, Luc; Pinay, Gilles

2017-04-01

Water quality in rivers results from biogeochemical processes in contributing hydrological compartments (soils, aquifers, hyporheic and riparian zones) and biochemical activity in the river network itself. Consequently, chemical fluxes fluctuate on multiple spatial and temporal scales, leading eventually to complex concentration signals in rivers. We characterized these fluctuations with innovative continuous monitoring of dissolved gases, to quantify transport and reaction processes occurring in different hydrological compartments. We performed stream-scale experiments in two headwater streams in Brittany, France. Factorial injections of inorganic nitrogen (NH4NO3), inorganic phosphate (P2O5) and multiple sources of labile carbon (acetate, tryptophan) were implemented in the two streams. We used a new field application of membrane inlet mass spectrometry to continuously monitor dissolved gases for multiple day-night periods (Chatton et al., 2016). Quantified gases included He, O2, N2, CO2, CH4, N2O, and 15N of dissolved N2 and N2O. We calibrated and assessed the methodology with well-established complementary techniques including gas chromatography and high-frequency water quality sensors. Wet chemistry and radon analysis complemented the study. The analyses provided several methodological and ecological insights and demonstrated that high frequency variations linked to background noise can be efficiently determined and filtered to derive effective fluxes. From a more fundamental point of view, the tested stream segments were fully characterized with extensive sampling of riverbeds and laboratory experiments, allowing scaling of point-level microbial and invertebrate diversity and activity on in-stream processing. This innovative technology allows fully-controlled in-situ experiments providing rich information with a high signal to noise ratio. We present the integrated nutrient demand and uptake and discuss limiting processes and elements at the reach and catchment scales. Eliot Chatton, Thierry Labasque, Jérôme de La Bernardie, Nicolas Guihéneuf, Olivier Bour, Luc Aquilina. 2016. Field Continuous Measurement of Dissolved Gases with a CF-MIMS: Applications to the Physics and Biogeochemistry of Groundwater Flow. Environ. Sci. Technol.
EDITORIAL: Announcing the 2009 Measurement Science and Technology Outstanding Paper Awards Announcing the 2009 Measurement Science and Technology Outstanding Paper Awards

NASA Astrophysics Data System (ADS)

Foss, John; Dewhurst, Richard; Fujii, Kenichi; Regtien, Paul

2010-06-01

Since 1991, Measurement Science and Technology has awarded a Best Paper prize. The Editorial Board of this journal believes that such a prize is an opportunity to thank authors for submitting their work, and serves as an integral part of the on-going quality review of the journal. The current breadth of topical areas that are covered by MST has made it advisable to expand the recognition of excellent publications. Hence, since 2005 the Editorial Board have presented 'Outstanding Paper Awards' in four subject categories: Fluid Mechanics; Measurement Science; Precision Measurements; and Sensors and Sensing Systems. This year also saw the introduction of a new category—Optical and Laser-based Techniques. 2009 Award Winners—Fluid Mechanics Digital particle image velocimetry (DPIV) robust phase correlation Adric Eckstein and Pavlos P Vlachos Department of Mechanical Engineering, Virginia Tech, Blacksburg, VA, USA This paper [1] represents a valuable improvement to the phase-only correlation technique (first proposed by Wernet in this journal in 2005 (Wernet M 2005 Symmetric phase-only filtering: a new paradigm for DPIV data processing Meas. Sci. Technol. 16 601-18) for particle-image-velocimetry (PIV) measurements of fluid flow. The authors establish a sound theoretical foundation and clearly describe the working principle of their robust phase correlation method. The methodology for assessing performance is excellent. Detailed results on several internationally recognized PIV test cases are presented. The robust phase correlation method is of general applicability and therefore can be expected to have substantial impact in this very active area of fluid-mechanics measurements. 2009 Award Winner—Precision Measurement A nanonewton force facility and a novel method for measurements of the air and vacuum permittivity at zero frequencies V Nesterov Physikalisch-Technische Bundesanstalt (PTB), Bundesallee 100, D-38116 Braunschweig, Germany This paper [2] describes a new method for measuring the air and vacuum permittivity by observing a nanonewton force in a disk-pendulum. The frequency dependence of the vacuum permittivity, ɛ0, has been one of the fundamental questions in physics. Although it is confidently believed that there is no frequency dependence in ɛ0, very few experiments have been conducted to verify the properties of ɛ0. Especially in the region near zero frequencies, no experiment has been done in the vacuum. The precise measurement of the vacuum permittivity is therefore of fundamental interest to test the correctness of Maxwell's equations in an electrostatic field. In this paper, the author developed a new principle using a disk-pendulum, where the displacement of the disk-pendulum in the presence of an electrostatic field has been detected by optical interferometry. The nanonewton forces generated by the electrostatic field have been measured to evaluate the air and vacuum permittivity at zero frequencies, achieving a relative standard uncertainty of 10-5 in the measurement of ɛ0. The measurement system developed here also opened a new way for the force standard in the nanonewton region, investigation of the Casimir effect, direct measurement of laser power etc. This paper has been downloaded more than 200 times since its publication. The selection committee members on precision measurement selected this paper from a strongly competitive list of eleven candidates for its sophisticated idea, originality in apparatus, and excellent result with uncertainty evaluation. Considering its impact on fundamental physics and also on precision force measurement in the nanonewton region, the paper was nominated for the MST Precision Measurement Award from the papers published in 2009. 2009 Award Winners—Sensors and Sensing Systems High-resolution and compact refractometer for salinity measurements D Malardé, Z Y Wu, P Grosso, J-L de Bougrenet de la Tocnaye and M Le Menn Optics Department, UMR CNRS 6082 FOTON, TELECOM Bretagne, CS 83818, 29238 Brest Cédex 3, France Laboratoire de Métrologie et de Chimie Océanographique, SHOM 13 rue du Châtelier, BP 30316, 29603 Brest Cedex, France The absolute salinity of seawater is an important component in the determination of the ocean's thermodynamic properties. This paper [3] presents a measurement system for very accurate determination of the salinity. The method is based on measuring the refractive index of seawater, a parameter that is related to the salinity. Although the method is essentially simple: using a prism and a PSD for direct measurement of the angle of refraction, the refraction also depends on many more parameters (temperature, pressure, wavelength). Moreover, for obtaining accurate salinity values, a high resolution of the refractive index is required, of the order of 10-7, under all possible conditions. Starting with a list of notations and symbols, the paper follows with an overview of existing methods for salinity measurements and their performances. Next, the principle based on refractometry is introduced, and a theoretical model is presented, comprising a large number of parameters that influence the properties of the refractometer. From this analysis there follows an optimization of the geometry of the device. The sensitivity for salinity and other water parameters are estimated from theory, and verified experimentally. Salinity measurements are compared with those using standard salinometers, and show an uncertainty less than a few 10-3 psu (practical salinity units). The obtained resolution is about 4 × 10-7, which is limited by that of the readout electronics of the PSD. It is demonstrated that this can be further improved to achieve the required resolution lower than 10-7. The authors make clear that their prototype, the length of which is about 12 cm, is an important step to a fully in situ oceanographic salinometer, but further testing is required to confirm reliability. Indeed, the paper does not report on long term effects of, for instance, contamination of the optical parts. Hopefully this will be investigated and published in the next stage of the research. 2009 Award Winners—Measurement Science Analysis and mitigation of measurement uncertainties in the traceability chain for the calibration of photovoltaic devices Harald Mullejans, Willem Zaaiman and Roberto Galleano European Commission, Joint Research Centre, Institute for Energy, Renewable Energy Unit, European Solar Test Installation, Via E Fermi 2749, I-21027 Ispra (Va), Italy The energy output and efficiency from different types of photovoltaic (PV) devices is an essential characteristic of photovoltaics. They may only be assessed from cell performance under standard test conditions, with traceability back to international standards. As this paper [4] points out in its introduction, the reliability of the measurements and their uncertainty are of crucial importance to manufacturers, operators and investors. Several features in the format of the article help to make this an excellent paper. Following an informative abstract, the paper has a concise introduction followed by a detailed formulation of the problem to be addressed. After a discussion of present-day international codes related to the measurement and performance of PVs, the paper goes on to describe one of the most difficult issues in traceability, that of deriving an irradiance quantity which is normally measured by a reference PV device. This might appear straightforward, but the paper highlights the difficulties of measuring the irradiance of sunlight (either simulated or natural) during the evaluation of the electrical performance of PV devices. The calibration of any PV device essentially consists of the measurement of the IV characteristics, by sweeping the device from its short-circuit condition (SC) to its open-circuit condition (OC) when exposed to (pulsed or continuous) simulated or natural sunlight. In this paper, all measurements were carried out at the European Solar Test Installation at Ispra in Italy. After describing the measurement methods, the authors discuss at length the calculations of measurement uncertainty. This leads to a rigorous discussion of relative uncertainties from measurement parameters. Uncertainties arise from a range of parameters that include small contributions from electrical, temperature and fill factor parameters. But the greatest arises from uncertainties both in the optical source and in the reference cell. As a consequence, the authors make a convincing case both for identifying the sources of uncertainty and for reducing overall uncertainties from +/-2.6% to below +/-2%. The conclusions are concise, and the paper is rounded off with a list of 34 references with several papers cited from 2005 onwards. This paper was rated as excellent by external referees, and has been downloaded several hundred times since its publication. It is one of 30 papers nominated this year in the Measurement Science category, and gained most votes from those short-listed. The discussion on measurement uncertainty sets a fine example to all researchers involved in experimental measurement science. 2009 Award Winners—Optical and Laser-based Techniques Measurement of tiny droplets using a newly developed optical fibre probe micro-fabricated by a femtosecond pulse laser T Saito, K Matsuda, Y Ozawa, S Oishi and S Aoshima Shizuoka University, 3-5-1 Johoku, Naka-ku Hamamatsu, Shizuoka 432-8561, Japan CRL, Hamamatsu Photonics K.K., 5000 Hirakuchi, Hamakita-ku Hamamatsu, Shizuoka 434-8601, Japan This Award goes to a paper [5] describing a fascinating and novel optical fibre probe applied to measurements in gas-liquid two-phase flows. Optical probes have already been widely applied to two-phase flows. These include the use of four-tip optical probes (F-TOP) for millimetre-size bubbles/droplets, and a single-tip optical fibre probe (S-TOP) for sub-millimetre size bubbles/droplets. This new paper describes how micro-machining a groove into the side of the silica fibre using a femtosecond laser system leads to a new optical fibre probe (Fs-TOP). It is capable of measurements of velocity and size of droplets down to about 50 µm in diameter. A useful introduction describes the importance of characterization required in gas-liquid two-phase flows. Measurements are required in a variety of research fields, e.g. sprays, automotive engines, fine chemistry and atomic power plants. Characterization of bubbles/droplets at high density has been desired for both laboratory and industrial use. Addressed towards this goal, this paper describes the use of optical fibre probes that have been modified with a side-wall groove. The authors point out that whereas the S-TOP is made very easily, with the tip of the S-TOP only micro-ground into a wedge shape, the Fs-TOP is very difficult to fabricate. In addition to a wedge tip, fabrication involves a femtosecond laser system with nano-order six-axis automatic optical stages and confocal optics. Hence it is important to intelligently select between these two types of probe depending on the measurement objective. Moreover, like all types of new probe, it is first necessary to validate its performance against other probes with accepted performance characteristics. After describing the experimental arrangement, the authors discuss at length the performance of the new Fs-TOP and that of the S-TOP for comparison. Additionally, results from the Fs-TOP are compared with those from visualization of the droplets by a high-speed video camera. Results show satisfactory agreement. After a lengthy presentation of results and discussion, the authors produce a concise set of inclusions, including a summary of the small perturbation in droplet size arising from the presence of the probe. The paper was one of 22 papers nominated this year for the Best Paper Award in Optical and Laser-based Techniques. It crosses the disciplines of optical measurement science and measurements required for the characterization of two-phase fluid flow. Exploiting new technological facilities in micromachining, the paper is an excellent example of new opportunities that may arise in measurement. References [1] Eckstein A and Vlachos P P 2009 Digital particle image velocimetry (DPIV) robust phase correlation Meas. Sci. Technol. 20 055401 (14pp) [2] Nesterov V 2009 A nanonewton force facility and a novel method for measurements of the air and vacuum permittivity at zero frequencies Meas. Sci. Technol. 20 084012 (6pp) [3] Malardé D, Wu Z Y, Grosso P, de Bougrenet de la Tocnaye J-L and Le Menn M 2009 High-resolution and compact refractometer for salinity measurements Meas. Sci. Technol. 20 015204 (8pp) [4] Müllejans H, Zaaiman W and Galleano R 2009 Analysis and mitigation of measurement uncertainties in the traceability chain for the calibration of photovoltaic devices Meas. Sci. Technol. 20 075101 (12pp) [5] Saito T, Matsuda K, Ozawa Y, Oishi S and Aoshima S 2009 Measurement of tiny droplets using a newly developed optical fibre probe micro-fabricated by a femtosecond pulse laser Meas. Sci. Technol. 20 114002 (12pp)
Autologous adipose tissue-derived stromal cells for treatment of spinal cord injury.

PubMed

Kang, Soo-Kyung; Shin, Myung-Joo; Jung, Jin Sup; Kim, Yong Geun; Kim, Cheul-Hong

2006-08-01

Isolated rat adipose tissue-derived stromal cells (rATSCs) contain pluripotent cells that can be differentiated into a variety of cell lineages, including neural cells. Recent work has shown that ATSCs can make neurosphere-like clumps and differentiate into neuron-like cells expressing neuronal markers, but their therapeutic effect is unclear. Here we report that intravenous infusion of oligodendrocyte precursor cells (OPCs) derived from rATSC autograft cells sources improve motor function in rat models of spinal cord injury (SCI). After 4-5 weeks, transplanted rATSC-OPC cells survived and migrated into the injured region of SCI very efficiently (30-35%) and migrated cells were partially differentiated into neurons and oligodendrocyte. Also, we found some of the engrafted OPCs migrated and integrated in the kidney, brain, lung, and liver through the intravenous system. Behavioral analysis revealed the locomotor functions of OPC-autografted SCI rats were significantly restored. Efficient migration of intravenously engrafted rATSC-OPCs cells into SCI lesion suggests that SCI-induced chemotaxic factors facilitate migration of rATSC-OPCs. Here, we verified that engrafted rATSCs and SCI-induced chemotaxic factors indeed play an important role in proliferation, migration, and differentiation of endogeneous spinal cord-derived neural progenitor cells in the injured region. In transplantation paradigms, the interaction between engrafted rATSC-OPCs and endogeneous spinal cord-derived neuronal progenitor cells will be important in promoting healing through fate decisions, resulting in coordinated induction of cell migration and differentiation.
Longitudinal changes in femur bone mineral density after spinal cord injury: effects of slice placement and peel method

PubMed Central

Dudley-Javoroski, S.

2010-01-01

Summary Surveillance of femur metaphysis bone mineral density (BMD) decline after spinal cord injury (SCI) may be subject to slice placement error of 2.5%. Adaptations to anti-osteoporosis measures should exceed this potential source of error. Image analysis parameters likewise affect BMD output and should be selected strategically in longitudinal studies. Introduction Understanding the longitudinal changes in bone mineral density (BMD) after spinal cord injury (SCI) is important when assessing new interventions. We determined the longitudinal effect of SCI on BMD of the femur metaphysis. To facilitate interpretation of longitudinal outcomes, we (1) determined the BMD difference associated with erroneous peripheral quantitative computed tomography (pQCT) slice placement, and (2) determined the effect of operator-selected pQCT peel algorithms on BMD. Methods pQCT images were obtained from the femur metaphysis (12% of length from distal end) of adult subjects with and without SCI. Slice placement errors were simulated at 3 mm intervals and were processed in two ways (threshold-based vs. concentric peel). Results BMD demonstrated a rapid decline over 2 years post-injury. BMD differences attributable to operator-selected peel methods were large (17.3% for subjects with SCI). Conclusions Femur metaphysis BMD declines after SCI in a manner similar to other anatomic sites. Concentric (percentage-based) peel methods may be most appropriate when special sensitivity is required to detect BMD adaptations. Threshold-based methods may be more appropriate when asymmetric adaptations are observed. PMID:19707702
Women's Sexual Health and Reproductive Function After SCI.

PubMed

Courtois, Frédérique; Alexander, Marcalee; McLain, Amie B Jackson

2017-01-01

Sexual function and to a lesser extent reproduction are often disrupted in women with spinal cord injuries (SCI), who must be educated to better understand their sexual and reproductive health. Women with SCI are sexually active; they can use psychogenic or reflexogenic stimulation to obtain sexual pleasure and orgasm. Treatment should consider a holistic approach using autonomic standards to describe remaining sexual function and to assess both genital function and psychosocial factors. Assessment of genital function should include thoracolumbar dermatomes, vulvar sensitivity (touch, pressure, vibration), and sacral reflexes. Self-exploration should include not only clitoral stimulation, but also stimulation of the vagina (G spot), cervix, and nipples conveyed by different innervation sources. Treatments may consider PDE5 inhibitors and flibanserin on an individual basis, and secondary consequences of SCI should address concerns with spasticity, pain, incontinence, and side effects of medications. Psychosocial issues must be addressed as possible contributors to sexual dysfunctions (eg, lower self-esteem, past sexual history, depression, dating habits). Pregnancy is possible for women with SCI; younger age at the time of injury and at the time of pregnancy being significant predictors of successful pregnancy, along with marital status, motor score, mobility, and occupational scores. Pregnancy may decrease the level of functioning (eg, self-care, ambulation, upper-extremity tasks), may involve complications (eg, decubitus ulcers, weight gain, urological complications), and must be monitored for postural hypotension and autonomic dysreflexia. Taking into consideration the physical and psychosocial determinants of sexuality and childbearing allows women with SCI to achieve positive sexual and reproductive health.

Skeletal muscle mitochondrial health and spinal cord injury.

PubMed

O'Brien, Laura C; Gorgey, Ashraf S

2016-10-18

Mitochondria are the main source of cellular energy production and are dynamic organelles that undergo biogenesis, remodeling, and degradation. Mitochondrial dysfunction is observed in a number of disease states including acute and chronic central or peripheral nervous system injury by traumatic brain injury, spinal cord injury (SCI), and neurodegenerative disease as well as in metabolic disturbances such as insulin resistance, type II diabetes and obesity. Mitochondrial dysfunction is most commonly observed in high energy requiring tissues like the brain and skeletal muscle. In persons with chronic SCI, changes to skeletal muscle may include remarkable atrophy and conversion of muscle fiber type from oxidative to fast glycolytic, combined with increased infiltration of intramuscular adipose tissue. These changes contribute to a proinflammatory environment, glucose intolerance and insulin resistance. The loss of metabolically active muscle combined with inactivity predisposes individuals with SCI to type II diabetes and obesity. The contribution of skeletal muscle mitochondrial density and electron transport chain activity to the development of the aforementioned comorbidities following SCI is unclear. A better understanding of the mechanisms involved in skeletal muscle mitochondrial dynamics is imperative to designing and testing effective treatments for this growing population. The current editorial will review ways to study mitochondrial function and the importance of improving skeletal muscle mitochondrial health in clinical populations with a special focus on chronic SCI.
SciSpark's SRDD : A Scientific Resilient Distributed Dataset for Multidimensional Data

NASA Astrophysics Data System (ADS)

Palamuttam, R. S.; Wilson, B. D.; Mogrovejo, R. M.; Whitehall, K. D.; Mattmann, C. A.; McGibbney, L. J.; Ramirez, P.

2015-12-01

Remote sensing data and climate model output are multi-dimensional arrays of massive sizes locked away in heterogeneous file formats (HDF5/4, NetCDF 3/4) and metadata models (HDF-EOS, CF) making it difficult to perform multi-stage, iterative science processing since each stage requires writing and reading data to and from disk. We have developed SciSpark, a robust Big Data framework, that extends ApacheTM Spark for scaling scientific computations. Apache Spark improves the map-reduce implementation in ApacheTM Hadoop for parallel computing on a cluster, by emphasizing in-memory computation, "spilling" to disk only as needed, and relying on lazy evaluation. Central to Spark is the Resilient Distributed Dataset (RDD), an in-memory distributed data structure that extends the functional paradigm provided by the Scala programming language. However, RDDs are ideal for tabular or unstructured data, and not for highly dimensional data. The SciSpark project introduces the Scientific Resilient Distributed Dataset (sRDD), a distributed-computing array structure which supports iterative scientific algorithms for multidimensional data. SciSpark processes data stored in NetCDF and HDF files by partitioning them across time or space and distributing the partitions among a cluster of compute nodes. We show usability and extensibility of SciSpark by implementing distributed algorithms for geospatial operations on large collections of multi-dimensional grids. In particular we address the problem of scaling an automated method for finding Mesoscale Convective Complexes. SciSpark provides a tensor interface to support the pluggability of different matrix libraries. We evaluate performance of the various matrix libraries in distributed pipelines, such as Nd4jTM and BreezeTM. We detail the architecture and design of SciSpark, our efforts to integrate climate science algorithms, parallel ingest and partitioning (sharding) of A-Train satellite observations from model grids. These solutions are encompassed in SciSpark, an open-source software framework for distributed computing on scientific data.
Mitochondrial-Based Therapeutics for the Treatment of Spinal Cord Injury: Mitochondrial Biogenesis as a Potential Pharmacological Target

PubMed Central

Scholpa, Natalie E.

2017-01-01

Spinal cord injury (SCI) is characterized by an initial trauma followed by a progressive cascade of damage referred to as secondary injury. A hallmark of secondary injury is vascular disruption leading to vasoconstriction and decreased oxygen delivery, which directly reduces the ability of mitochondria to maintain homeostasis and leads to loss of ATP-dependent cellular functions, calcium overload, excitotoxicity, and oxidative stress, further exacerbating injury. Restoration of mitochondria dysfunction during the acute phases of secondary injury after SCI represents a potentially effective therapeutic strategy. This review discusses the past and present pharmacological options for the treatment of SCI as well as current research on mitochondria-targeted approaches. Increased antioxidant activity, inhibition of the mitochondrial permeability transition, alternate energy sources, and manipulation of mitochondrial morphology are among the strategies under investigation. Unfortunately, many of these tactics address single aspects of mitochondrial dysfunction, ultimately proving largely ineffective. Therefore, this review also examines the unexplored therapeutic efficacy of pharmacological enhancement of mitochondrial biogenesis, which has the potential to more comprehensively improve mitochondrial function after SCI. PMID:28935700
Mitochondrial-Based Therapeutics for the Treatment of Spinal Cord Injury: Mitochondrial Biogenesis as a Potential Pharmacological Target.

PubMed

Scholpa, Natalie E; Schnellmann, Rick G

2017-12-01

Spinal cord injury (SCI) is characterized by an initial trauma followed by a progressive cascade of damage referred to as secondary injury. A hallmark of secondary injury is vascular disruption leading to vasoconstriction and decreased oxygen delivery, which directly reduces the ability of mitochondria to maintain homeostasis and leads to loss of ATP-dependent cellular functions, calcium overload, excitotoxicity, and oxidative stress, further exacerbating injury. Restoration of mitochondria dysfunction during the acute phases of secondary injury after SCI represents a potentially effective therapeutic strategy. This review discusses the past and present pharmacological options for the treatment of SCI as well as current research on mitochondria-targeted approaches. Increased antioxidant activity, inhibition of the mitochondrial permeability transition, alternate energy sources, and manipulation of mitochondrial morphology are among the strategies under investigation. Unfortunately, many of these tactics address single aspects of mitochondrial dysfunction, ultimately proving largely ineffective. Therefore, this review also examines the unexplored therapeutic efficacy of pharmacological enhancement of mitochondrial biogenesis, which has the potential to more comprehensively improve mitochondrial function after SCI. U.S. Government work not protected by U.S. copyright.
Role of the reaction of stabilized Criegee intermediates with peroxy radicals in particle formation and growth in air.

PubMed

Zhao, Yue; Wingen, Lisa M; Perraud, Véronique; Greaves, John; Finlayson-Pitts, Barbara J

2015-05-21

Ozonolysis of alkenes is an important source of secondary organic aerosol (SOA) in the atmosphere. However, the mechanisms by which stabilized Criegee intermediates (SCI) react to form and grow the particles, and in particular the contributions from oligomers, are not well understood. In this study, ozonolysis of trans-3-hexene (C6H12), as a proxy for small alkenes, was investigated with an emphasis on the mechanisms of particle formation and growth. Ozonolysis experiments were carried out both in static Teflon chambers (18-20 min reaction times) and in a glass flow reactor (24 s reaction time) in the absence and presence of OH or SCI scavengers, and under different relative humidity (RH) conditions. The chemical composition of polydisperse and size-selected SOA particles was probed using different mass spectrometric techniques and infrared spectroscopy. Oligomers having SCI as the chain unit are found to be the dominant components of such SOA particles. The formation mechanism for these oligomers suggested by our results follows the sequential addition of SCI to organic peroxy (RO2) radicals, in agreement with previous studies by Moortgat and coworkers. Smaller particles are shown to have a relatively greater contribution from longer oligomers. Higher O/C ratios are observed in smaller particles and are similar to those of oligomers resulting from RO2 + nSCI, supporting a significant role for longer oligomers in particle nucleation and early growth. Under atmospherically relevant RH of 30-80%, water vapor suppresses oligomer formation through scavenging SCI, but also enhances particle nucleation. Under humid conditions, or in the presence of formic or hydrochloric acid as SCI scavengers, peroxyhemiacetals are formed by the acid-catalyzed particle phase reaction between oligomers from RO2 + nSCI and a trans-3-hexene derived carbonyl product. In contrast to the ozonolysis of trans-3-hexene, oligomerization involving RO2 + nSCI does not appear to be prevalent in the ozonolysis of α-cedrene (C15H24), indicating different particle formation mechanisms for small and large complex alkenes that need to be taken into account in atmospheric models.
PHOTOCHEMICAL SIMULATIONS OF POINT SOURCE EMISSIONS WITH THE MODELS-3 CMAQ PLUME-IN-GRID APPROACH

EPA Science Inventory

A plume-in-grid (PinG) approach has been designed to provide a realistic treatment for the simulation the dynamic and chemical processes impacting pollutant species in major point source plumes during a subgrid scale phase within an Eulerian grid modeling framework. The PinG sci...
Racial-ethnic variations in paid and unpaid caregiving: Findings among persons with traumatic spinal cord injury.

PubMed

Walker, Elizabeth A; Cao, Yue; Edles, Philip A; Acuna, Joshua; Sligh-Conway, Cassandra; Krause, James S

2015-10-01

The effects of race-ethnicity on the use of paid and unpaid caregivers for those with spinal cord injury (SCI) have received little attention in the literature. Compare the amount of paid and unpaid caregiver hours received and sources of caregiving between non-Hispanic White and non-Hispanic Black participants with SCI, controlling for demographic, injury-related, and economic variables. Participants were identified from a large specialty hospital. Self-report data were collected by mail. Five aspects of caregiving were assessed: (a) paid assistance hours, (b) satisfaction with care, (c) unpaid assistance hours, (d) sources of informal care, and (e) evaluation of whether needs were met. Whites were more satisfied with paid care. Approximately 43.4% of Whites received informal care from their spouse every day, 14.7% higher than Blacks. Blacks were more likely to receive informal care from other family members, friends, church, and others. When controlling for gender, injury severity, chronological age, and years post injury, Blacks reported 1.50 more paid assistance hours (95% CI, 0.31-2.68 hours) and 1.83 less unpaid assistance hours than Whites (95% CI, 0.25-3.41 hours). Differences diminished and were not statistically significant after adding marital status and income into regression models. The results did not provide strong evidence of racial disparities regarding caregiver assistance for those with SCI. Level of income appears to be directly related to satisfaction of quality caregiving and the use of paid versus unpaid care for those living with SCI. Copyright © 2015 Elsevier Inc. All rights reserved.
Leisure Time Physical Activity of People with Spinal Cord Injury: Mainly with Clubs of Spinal Cord Injury Patients in Busan-Kyeongnam, Korea

PubMed Central

Kim, In Taek; Mun, Jong Hyun; Jun, Po Sung; Kim, Ghi Chan; Sim, Young-Joo

2011-01-01

Objective To estimate hours of leisure time physical activity (LTPA) performed by people with chronic spinal cord injury (SCI) and to identify the demographic and injury-related characteristics associated with LTPA of people with chronic SCI. Method Seventy nine persons with SCI living in Busan and Gyongsangnam-do were recruited. They completed a self-administered questionnaire, which consisted of items about personal characteristics, type of LTPA, hours of LTPA, LTPA intensity, and LTPA satisfaction. Results Most participants (92.4%) did not work. The respondents reported a daily mean of 3.13 hours (±1.47) of LTPA; however, 3.8% reported no LTPA whatsoever. Years post-injury, income sources, and type of medical payment emerged as a predictors of LTPA. Years post-injury were positively correlated with amount of leisure activity. In the case of self income, LTPA was longer than for groups with different income sources (e.g.partner, parents). For patients receiving workers' compensation insurance, LTPA was longer than for patients receiving non-WC insurance. Most LTPA was done at a moderate intensity. The three most frequently reported types of LTPA were wheeling (26%), sports (19%), and stretching exercise (15%). There was overall dissatisfaction with LTPA. Conclusion Daily LTPA hours were longer than previously reported, but wheeling accounted for a large part of the activity. Intensity of activity was generally moderate. The employment rate was very low. Clearly, participating in regular LTPA for health purposes is very important to people with chronic SCI, but it is also important for them to have jobs. PMID:22506183
Sources of SOA gaseous precursors in contrasted urban environments: a focus on mono-aromatic compounds and intermediate volatility compounds

NASA Astrophysics Data System (ADS)

Salameh, Therese; Borbon, Agnès; Ait-Helal, Warda; Afif, Charbel; Sauvage, Stéphane; Locoge, Nadine; Bonneau, Stéphane; Sanchez, Olivier

2016-04-01

Among Volatile Organic Compounds (VOC), the mono-aromatic compounds so-called BTEX (Benzene, Toluene, Ethylbenzene, and Xylenes) and the intermediate volatility organic compounds (IVOC) with C>12 are two remarkable chemical families having high impact on health, as well as on the production of secondary pollutants like secondary organic aerosols (SOA) and ozone. However, the nature and relative importance of their sources and, consequently, their impact on SOA formation at urban scale is still under debate. On the one hand, BTEX observations in urban areas of northern mid-latitudes do not reconcile with emission inventories; the latter pointing to solvent use as the dominant source compared to traffic. Moreover, a recent study by Borbon et al. (2013) has shown an enrichment in the C7-C9 aromatic fraction in Paris atmosphere by a factor of 3 compared to other cities. Causes would be: (i) differences in gasoline composition, (ii) differences in vehicle fleet composition, and (iii) differences in solvent use related sources. On the other hand, many smog chamber studies have highlighted IVOCs as important SOA precursors over the last decade but their origin and importance in urban areas relative to other precursors like BTEX is still poorly addressed. Here we combined large VOC datasets to investigate sources of BTEX and IVOC in contrasted urban areas by source-receptor approaches and laboratory experiments. Ambient data include multi-site speciated ambient measurements of C2 to C17 VOCs (traffic, urban background, and tunnel) from air quality networks (ie. AIRPARIF in Paris) and intensive field campaigns (MEGAPOLI-Paris, TRANSEMED in Beirut and Istanbul, PHOTOPAQ in Brussels). Preliminary results for Paris suggest that traffic dominates BTEX concentrations while traffic and domestic heating for IVOC (>70%). In parallel, the detailed composition of the fuel liquid phase was determined at the laboratory for typical fuels distributed in Ile de France region (diesel, SP95, SP95 E10, and SP98) and was used to constraint evaporative emissions in order to predict the headspace vapour composition (Harley and Coulter-Burke, 2000). Modelled and observed compositions are in good agreement (differences up to 20%). Therefore, the implemented model is a relevant tool to test the sensitivity of BTEX and other VOCs ambient composition to evaporative emissions of fuels with regards to their composition. Such analysis will be extended to other target cities and similarities/differences will be presented regarding regional characteristics. This work was supported by the Ile de France region, Life and PHOTOPAQ grant, PICS-CNRS, ENVIMED and ChArMEx. We would like to thank Laurence Dépelchin and Thierry Léonardis for technical support and AIRPARIF for providing the data. Borbon, A., et al. (2013) Emission ratios of anthropogenic VOC in northern mid-latitude megacities: observations vs. emission inventories in Los Angeles and Paris, J. Geophys. Res. 118, 2041 - 2057. Harley, R. and Coulter-Burke, S. (2000) Relating Liquid Fuel and Headspace Vapor Composition for California Reformulated Gasoline Samples Containing Ethanol, Environ. Sci. Technol. 34, 4088-4094. Ait-Helal, W.; Borbon, A.; Sauvage, S.; et al., Atmos. Chem. Phys. vol. 14 , No. 19 , p. 10439-10464
Women's Sexual Health and Reproductive Function After SCI

PubMed Central

Alexander, Marcalee; McLain, Amie B. (Jackson)

2017-01-01

Sexual function and to a lesser extent reproduction are often disrupted in women with spinal cord injuries (SCI), who must be educated to better understand their sexual and reproductive health. Women with SCI are sexually active; they can use psychogenic or reflexogenic stimulation to obtain sexual pleasure and orgasm. Treatment should consider a holistic approach using autonomic standards to describe remaining sexual function and to assess both genital function and psychosocial factors. Assessment of genital function should include thoracolumbar dermatomes, vulvar sensitivity (touch, pressure, vibration), and sacral reflexes. Self-exploration should include not only clitoral stimulation, but also stimulation of the vagina (G spot), cervix, and nipples conveyed by different innervation sources. Treatments may consider PDE5 inhibitors and flibanserin on an individual basis, and secondary consequences of SCI should address concerns with spasticity, pain, incontinence, and side effects of medications. Psychosocial issues must be addressed as possible contributors to sexual dysfunctions (eg, lower self-esteem, past sexual history, depression, dating habits). Pregnancy is possible for women with SCI; younger age at the time of injury and at the time of pregnancy being significant predictors of successful pregnancy, along with marital status, motor score, mobility, and occupational scores. Pregnancy may decrease the level of functioning (eg, self-care, ambulation, upper-extremity tasks), may involve complications (eg, decubitus ulcers, weight gain, urological complications), and must be monitored for postural hypotension and autonomic dysreflexia. Taking into consideration the physical and psychosocial determinants of sexuality and childbearing allows women with SCI to achieve positive sexual and reproductive health. PMID:29339874
A qualitative study on the use of personal information technology by persons with spinal cord injury.

PubMed

Mattar, Andrew A G; Hitzig, Sander L; McGillivray, Colleen F

2015-01-01

Previous work has shown that information technology (IT), such as personal computers and other digital devices (e.g. tablets, laptops, etc.), software, online resources and hand-held communication tools (e.g. cellphones), has benefits for health and well-being for persons with chronic health conditions. To date, the ways that persons with spinal cord injury (SCI) use IT in their daily activities has not been fully explored. Thus, the purpose of the study was to obtain an in-depth perspective of how people with SCI regularly use IT to gain insight on ways IT can be used to support health and well-being in the community for this population. Semi-structured interviews were conducted with community-dwelling persons with SCI (N = 10) who identified themselves as frequent-or-daily-users of IT. Qualitative content analysis was used to identify the ways that persons with SCI use personal IT. Ten themes related to IT use were identified: (1) Modifications allowing access to IT; (2) Convenience of IT and its perceived value; (3) IT as a scheduler/planner; (4) Challenges; (5) Contributions of IT to participation; (6) Access to information; (7) Influence of IT on well-being; (8) IT as a connector; (9) Issues of IT acquisition; and (10) Desires for future devices/technology. The findings suggest that IT use by people with SCI contributes to general health and well-being, by increasing access to SCI-related health information and opportunity for social participation. Despite the benefits offered by IT, persons with SCI have identified a degree of skepticism about the reliability and applicability of the health information they find online. Future work on developing and implementing IT for health and well-being post-SCI should take into account consumers' perspectives to facilitate uptake. Implications for Rehabilitation There is a need for a more refined understanding of how people with spinal cord injury (SCI) use information technology (IT) in their daily lives in order to understand how IT can support health and well-being post-injury in the community. IT use holds implications for the physical and mental well-being of persons with SCI. IT allows access to a variety of information, and facilitates participation in the community. The enthusiasm for the use of IT is tempered by a degree of skepticism about the reliability and applicability of the health information available online. This highlights the need to raise awareness of existing sources vetted for this population, and to develop content that meets the particular health needs for SCI.
Criegee intermediates and their impacts on the troposphere

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khan, M. A. H.; Percival, C. J.; Caravan, R. L.

We report Criegee intermediates (CIs), carbonyl oxides formed in ozonolysis of alkenes, play key roles in the troposphere. The decomposition of CIs can be a significant source of OH to the tropospheric oxidation cycle especially during nighttime and winter months. A variety of model-measurement studies have estimated surface-level stabilized Criegee intermediate (sCI) concentrations on the order of 1 × 10 4 cm -3 to 1 × 10 5 cm -3, which makes a non-negligible contribution to the oxidising capacity in the terrestrial boundary layer. The reactions of sCI with the water monomer and the water dimer have been found tomore » be the most important bimolecular reactions to the tropospheric sCI loss rate, at least for the smallest carbonyl oxides; the products from these reactions (e.g. hydroxymethyl hydroperoxide, HMHP) are also of importance to the atmospheric oxidation cycle. The sCI can oxidise SO 2 to form SO 3, which can go on to form a significant amount of H 2SO 4 which is a key atmospheric nucleation species and therefore vital to the formation of clouds. Lastly, the sCI can also react with carboxylic acids, carbonyl compounds, alcohols, peroxy radicals and hydroperoxides, and the products of these reactions are likely to be highly oxygenated species, with low vapour pressures, that can lead to nucleation and SOA formation over terrestrial regions.« less
Criegee intermediates and their impacts on the troposphere

DOE PAGES

Khan, M. A. H.; Percival, C. J.; Caravan, R. L.; ...

2018-02-15

We report Criegee intermediates (CIs), carbonyl oxides formed in ozonolysis of alkenes, play key roles in the troposphere. The decomposition of CIs can be a significant source of OH to the tropospheric oxidation cycle especially during nighttime and winter months. A variety of model-measurement studies have estimated surface-level stabilized Criegee intermediate (sCI) concentrations on the order of 1 × 10 4 cm -3 to 1 × 10 5 cm -3, which makes a non-negligible contribution to the oxidising capacity in the terrestrial boundary layer. The reactions of sCI with the water monomer and the water dimer have been found tomore » be the most important bimolecular reactions to the tropospheric sCI loss rate, at least for the smallest carbonyl oxides; the products from these reactions (e.g. hydroxymethyl hydroperoxide, HMHP) are also of importance to the atmospheric oxidation cycle. The sCI can oxidise SO 2 to form SO 3, which can go on to form a significant amount of H 2SO 4 which is a key atmospheric nucleation species and therefore vital to the formation of clouds. Lastly, the sCI can also react with carboxylic acids, carbonyl compounds, alcohols, peroxy radicals and hydroperoxides, and the products of these reactions are likely to be highly oxygenated species, with low vapour pressures, that can lead to nucleation and SOA formation over terrestrial regions.« less
Microlithography and resist technology information at your fingertips via SciFinder

NASA Astrophysics Data System (ADS)

Konuk, Rengin; Macko, John R.; Staggenborg, Lisa

1997-07-01

Finding and retrieving the information you need about microlithography and resist technology in a timely fashion can make or break your competitive edge in today's business environment. Chemical Abstracts Service (CAS) provides the most complete and comprehensive database of the chemical literature in the CAplus, REGISTRY, and CASREACT files including 13 million document references, 15 million substance records and over 1.2 million reactions. This includes comprehensive coverage of positive and negative resist formulations and processing, photoacid generation, silylation, single and multilayer resist systems, photomasks, dry and wet etching, photolithography, electron-beam, ion-beam and x-ray lithography technologies and process control, optical tools, exposure systems, radiation sources and steppers. Journal articles, conference proceedings and patents related to microlithography and resist technology are analyzed and indexed by scientific information analysts with strong technical background in these areas. The full CAS database, which is updated weekly with new information, is now available at your desktop, via a convenient, user-friendly tool called 'SciFinder.' Author, subject and chemical substance searching is simplified by SciFinder's smart search features. Chemical substances can be searched by chemical structure, chemical name, CAS registry number or molecular formula. Drawing chemical structures in SciFinder is easy and does not require compliance with CA conventions. Built-in intelligence of SciFinder enables users to retrieve substances with multiple components, tautomeric forms and salts.
DEMONSTRATION BULLETIN: SOLIDIFICATION/STABILIZATION PROCESS, Hazcon, Inc.

EPA Science Inventory

The solidification/stabilization technology mixes hazardous wastes, cement, water and an additive called Chloranan. Chloranan, a nontoxic chemical, encapsulates organic molecules, rendering them ineffective in retarding or inhibiting solidification. This treatment technol...
Review and Comparison of the Search Effectiveness and User Interface of Three Major Online Chemical Databases

ERIC Educational Resources Information Center

Bharti, Neelam; Leonard, Michelle; Singh, Shailendra

2016-01-01

Online chemical databases are the largest source of chemical information and, therefore, the main resource for retrieving results from published journals, books, patents, conference abstracts, and other relevant sources. Various commercial, as well as free, chemical databases are available. SciFinder, Reaxys, and Web of Science are three major…
[Analysis on acupuncture related articles published in periodicals in science citation index (SCI) in 2008].

PubMed

Wang, Chao; He, Wen-Ju; Guo, Yi

2010-09-01

Acupuncture related articles published in periodicals in Science Citation Index (SCI) in 2008 were summarized and analyzed. About 583 articles were collected using "acupuncture" and "in 2008" as keywords in the Web of Science data base by information retrieval. These papers were summarized and analyzed from various aspects of country, language, subject category, literature type, publication sources, impact factor, research method, acupoints, disease category and needling methods by using Excel software combined with manual sorting of the literature, the aim is to provide a reference for domestic acupuncture research.
Characterization of key aerosol, trace gas and meteorological properties and particle formation and growth processes dependent on air mass origins in coastal Southern Spain

NASA Astrophysics Data System (ADS)

Diesch, J.; Drewnick, F.; Sinha, V.; Williams, J.; Borrmann, S.

2011-12-01

The chemical composition and concentration of aerosols at a certain site can vary depending on season, the air mass source region and distance from sources. Regardless of the environment, new particle formation (NPF) events are one of the major sources for ultrafine particles which are potentially hazardous to human health. Grown particles are optically active and efficient CCN resulting in important implications for visibility and climate (Zhang et al., 2004). The study presented here is intended to provide information about various aspects of continental, urban and marine air masses reflected by wind patterns of the air arriving at the measurement site. Additionally we will be focusing on NPF events associated with different types of air masses affecting their emergence and temporal evolution. Measurements of the ambient aerosol, various trace gases and meteorological parameters were performed within the framework of the DOMINO (Diel Oxidant Mechanisms In relation to Nitrogen Oxides) project. The field campaign took place from mid-November to mid-December 2008 at the atmospheric research station "El Arenosillo" located at the interface between a natural park, industrial cities (Huelva, Seville) and the Atlantic Ocean. Number and mass as well as PAH and black carbon concentrations were measured in PM1 and size distribution instruments covered the size range 6 nm up to 32 μm. The chemical composition of the non-refractory submicron aerosol was measured by means of an Aerosol Mass Spectrometer (AMS). In order to evaluate the characteristics of different air masses linking local and regional sources as well as NPF processes, characteristic air mass types were classified dependent on backwards trajectory pathways and local meteorology. Large nuclei mode concentrations in the number size distribution were found within continental and urban influenced air mass types due to frequently occurring NPF events. Exploring individual production and sink variables, sulfuric acid was found to be the main particle formation contributor. The AMS analysis showed inorganic sulfate species being substantially higher during the growth stages of urban compared to continentally influenced events that are characterized by lower PM1 mass concentrations mainly composed of oxidized organics. The lowest average PM1 mass and number concentrations (2 μg m-3, 1000 cm-3) were found in marine air mass types characterized by the highest sulfate PM1-fraction (54%, 0.91 μg m-3) and volume size distributions probably dominated by sodium chloride particles from sea spray. Two to five times higher submicron aerosol mass concentrations were observed in continental (2.5 μg m-3) and urban (4.2 μg m-3) air mass types mainly consisting of organic species that were further evaluated using Positive Matrix Factorization (PMF). Zhang, Q. et al. (2004), Environ. Sci. Technol., 38, 4797-4809.
Spectroscopic imaging of limiter heat and particle fluxes and the resulting impurity sources during Wendelstein 7-X startup plasmas.

PubMed

Stephey, L; Wurden, G A; Schmitz, O; Frerichs, H; Effenberg, F; Biedermann, C; Harris, J; König, R; Kornejew, P; Krychowiak, M; Unterberg, E A

2016-11-01

A combined IR and visible camera system [G. A. Wurden et al., "A high resolution IR/visible imaging system for the W7-X limiter," Rev. Sci. Instrum. (these proceedings)] and a filterscope system [R. J. Colchin et al., Rev. Sci. Instrum. 74, 2068 (2003)] were implemented together to obtain spectroscopic data of limiter and first wall recycling and impurity sources during Wendelstein 7-X startup plasmas. Both systems together provided excellent temporal and spatial spectroscopic resolution of limiter 3. Narrowband interference filters in front of the camera yielded C-III and H α photon flux, and the filterscope system provided H α , H β , He-I, He-II, C-II, and visible bremsstrahlung data. The filterscopes made additional measurements of several points on the W7-X vacuum vessel to yield wall recycling fluxes. The resulting photon flux from both the visible camera and filterscopes can then be compared to an EMC3-EIRENE synthetic diagnostic [H. Frerichs et al., "Synthetic plasma edge diagnostics for EMC3-EIRENE, highlighted for Wendelstein 7-X," Rev. Sci. Instrum. (these proceedings)] to infer both a limiter particle flux and wall particle flux, both of which will ultimately be used to infer the complete particle balance and particle confinement time τ P .
Predict-first experimental analysis using automated and integrated magnetohydrodynamic modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lyons, B. C.; Paz-Soldan, C.; Meneghini, O.

An integrated-modeling workflow has been developed in this paper for the purpose of performing predict-first analysis of transient-stability experiments. Starting from an existing equilibrium reconstruction from a past experiment, the workflow couples together the EFIT Grad-Shafranov solver [L. Lao et al., Fusion Sci. Technol. 48, 968 (2005)], the EPED model for the pedestal structure [P. B. Snyder et al., Phys. Plasmas 16, 056118 (2009)], and the NEO drift-kinetic-equation solver [E. A. Belli and J. Candy, Plasma Phys. Controlled Fusion 54, 015015 (2012)] (for bootstrap current calculations) in order to generate equilibria with self-consistent pedestal structures as the plasma shape andmore » various scalar parameters (e.g., normalized β, pedestal density, and edge safety factor [q 95]) are changed. These equilibria are then analyzed using automated M3D-C1 extended-magnetohydrodynamic modeling [S. C. Jardin et al., Comput. Sci. Discovery 5, 014002 (2012)] to compute the plasma response to three-dimensional magnetic perturbations. This workflow was created in conjunction with a DIII-D experiment examining the effect of triangularity on the 3D plasma response. Several versions of the workflow were developed, and the initial ones were used to help guide experimental planning (e.g., determining the plasma current necessary to maintain the constant edge safety factor in various shapes). Subsequent validation with the experimental results was then used to revise the workflow, ultimately resulting in the complete model presented here. We show that quantitative agreement was achieved between the M3D-C1 plasma response calculated for equilibria generated by the final workflow and equilibria reconstructed from experimental data. A comparison of results from earlier workflows is used to show the importance of properly matching certain experimental parameters in the generated equilibria, including the normalized β, pedestal density, and q 95. On the other hand, the details of the pedestal current did not significantly impact the plasma response in these equilibria. A comparison to the experimentally measured plasma response shows mixed agreement, indicating that while the equilibria are predicted well, additional analysis tools may be needed. In conclusion, we note the implications that these results have for the success of future predict-first studies, particularly the need for scans of uncertain parameters and for close collaboration between experimentalists and theorists.« less

Predict-first experimental analysis using automated and integrated magnetohydrodynamic modeling

DOE PAGES

Lyons, B. C.; Paz-Soldan, C.; Meneghini, O.; ...

2018-05-07

An integrated-modeling workflow has been developed in this paper for the purpose of performing predict-first analysis of transient-stability experiments. Starting from an existing equilibrium reconstruction from a past experiment, the workflow couples together the EFIT Grad-Shafranov solver [L. Lao et al., Fusion Sci. Technol. 48, 968 (2005)], the EPED model for the pedestal structure [P. B. Snyder et al., Phys. Plasmas 16, 056118 (2009)], and the NEO drift-kinetic-equation solver [E. A. Belli and J. Candy, Plasma Phys. Controlled Fusion 54, 015015 (2012)] (for bootstrap current calculations) in order to generate equilibria with self-consistent pedestal structures as the plasma shape andmore » various scalar parameters (e.g., normalized β, pedestal density, and edge safety factor [q 95]) are changed. These equilibria are then analyzed using automated M3D-C1 extended-magnetohydrodynamic modeling [S. C. Jardin et al., Comput. Sci. Discovery 5, 014002 (2012)] to compute the plasma response to three-dimensional magnetic perturbations. This workflow was created in conjunction with a DIII-D experiment examining the effect of triangularity on the 3D plasma response. Several versions of the workflow were developed, and the initial ones were used to help guide experimental planning (e.g., determining the plasma current necessary to maintain the constant edge safety factor in various shapes). Subsequent validation with the experimental results was then used to revise the workflow, ultimately resulting in the complete model presented here. We show that quantitative agreement was achieved between the M3D-C1 plasma response calculated for equilibria generated by the final workflow and equilibria reconstructed from experimental data. A comparison of results from earlier workflows is used to show the importance of properly matching certain experimental parameters in the generated equilibria, including the normalized β, pedestal density, and q 95. On the other hand, the details of the pedestal current did not significantly impact the plasma response in these equilibria. A comparison to the experimentally measured plasma response shows mixed agreement, indicating that while the equilibria are predicted well, additional analysis tools may be needed. In conclusion, we note the implications that these results have for the success of future predict-first studies, particularly the need for scans of uncertain parameters and for close collaboration between experimentalists and theorists.« less
Predict-first experimental analysis using automated and integrated magnetohydrodynamic modeling

NASA Astrophysics Data System (ADS)

Lyons, B. C.; Paz-Soldan, C.; Meneghini, O.; Lao, L. L.; Weisberg, D. B.; Belli, E. A.; Evans, T. E.; Ferraro, N. M.; Snyder, P. B.

2018-05-01

An integrated-modeling workflow has been developed for the purpose of performing predict-first analysis of transient-stability experiments. Starting from an existing equilibrium reconstruction from a past experiment, the workflow couples together the EFIT Grad-Shafranov solver [L. Lao et al., Fusion Sci. Technol. 48, 968 (2005)], the EPED model for the pedestal structure [P. B. Snyder et al., Phys. Plasmas 16, 056118 (2009)], and the NEO drift-kinetic-equation solver [E. A. Belli and J. Candy, Plasma Phys. Controlled Fusion 54, 015015 (2012)] (for bootstrap current calculations) in order to generate equilibria with self-consistent pedestal structures as the plasma shape and various scalar parameters (e.g., normalized β, pedestal density, and edge safety factor [q95]) are changed. These equilibria are then analyzed using automated M3D-C1 extended-magnetohydrodynamic modeling [S. C. Jardin et al., Comput. Sci. Discovery 5, 014002 (2012)] to compute the plasma response to three-dimensional magnetic perturbations. This workflow was created in conjunction with a DIII-D experiment examining the effect of triangularity on the 3D plasma response. Several versions of the workflow were developed, and the initial ones were used to help guide experimental planning (e.g., determining the plasma current necessary to maintain the constant edge safety factor in various shapes). Subsequent validation with the experimental results was then used to revise the workflow, ultimately resulting in the complete model presented here. We show that quantitative agreement was achieved between the M3D-C1 plasma response calculated for equilibria generated by the final workflow and equilibria reconstructed from experimental data. A comparison of results from earlier workflows is used to show the importance of properly matching certain experimental parameters in the generated equilibria, including the normalized β, pedestal density, and q95. On the other hand, the details of the pedestal current did not significantly impact the plasma response in these equilibria. A comparison to the experimentally measured plasma response shows mixed agreement, indicating that while the equilibria are predicted well, additional analysis tools may be needed. Finally, we note the implications that these results have for the success of future predict-first studies, particularly the need for scans of uncertain parameters and for close collaboration between experimentalists and theorists.
GeoSciGraph: An Ontological Framework for EarthCube Semantic Infrastructure

NASA Astrophysics Data System (ADS)

Gupta, A.; Schachne, A.; Condit, C.; Valentine, D.; Richard, S.; Zaslavsky, I.

2015-12-01

The CINERGI (Community Inventory of EarthCube Resources for Geosciences Interoperability) project compiles an inventory of a wide variety of earth science resources including documents, catalogs, vocabularies, data models, data services, process models, information repositories, domain-specific ontologies etc. developed by research groups and data practitioners. We have developed a multidisciplinary semantic framework called GeoSciGraph semantic ingration of earth science resources. An integrated ontology is constructed with Basic Formal Ontology (BFO) as its upper ontology and currently ingests multiple component ontologies including the SWEET ontology, GeoSciML's lithology ontology, Tematres controlled vocabulary server, GeoNames, GCMD vocabularies on equipment, platforms and institutions, software ontology, CUAHSI hydrology vocabulary, the environmental ontology (ENVO) and several more. These ontologies are connected through bridging axioms; GeoSciGraph identifies lexically close terms and creates equivalence class or subclass relationships between them after human verification. GeoSciGraph allows a community to create community-specific customizations of the integrated ontology. GeoSciGraph uses the Neo4J,a graph database that can hold several billion concepts and relationships. GeoSciGraph provides a number of REST services that can be called by other software modules like the CINERGI information augmentation pipeline. 1) Vocabulary services are used to find exact and approximate terms, term categories (community-provided clusters of terms e.g., measurement-related terms or environmental material related terms), synonyms, term definitions and annotations. 2) Lexical services are used for text parsing to find entities, which can then be included into the ontology by a domain expert. 3) Graph services provide the ability to perform traversal centric operations e.g., finding paths and neighborhoods which can be used to perform ontological operations like computing transitive closure (e.g., finding all subclasses of rocks). 4) Annotation services are used to adorn an arbitrary block of text (e.g., from a NOAA catalog record) with ontology terms. The system has been used to ontologically integrate diverse sources like Science-base, NOAA records, PETDB.
Otolith Asymmetry and kinetotic Behaviour of Fish in Parabolic Flights and under simulated Parabolic Flight "Micro"Gravity - a Drop-Tower Experiment

NASA Astrophysics Data System (ADS)

Knie, M.; Hilbig, R.; Anken, R.

We have shown earlier that some fish of a given batch reveal motion sickness a kinetosis at the transition from earth gravity to diminished gravity The percentual ratios of the various types of behaviour normal swimming and kinetotic swimming kinetotic specimens revealed looping responses LR or spinning movements SM however highly differed depending on the quality of diminished gravity Anken and Hilbig Microgravity Sci Technol 15 52-57 2004 Whereas kinetoses were exhibited by some 90 of the individuals who had experienced flights at high quality microgravity HQM 10-6g ZARM drop-tower only some 15-25 depending on the batch of all animals had shown a kinetotic behaviour during parabolic aircraft flights PFs low quality microgravity LQM 0 03-0 05g Probably LQM is sufficient for most fish to be perceived - in relation to the individual shape or weight of otoliths and thus the performance of the vestibular system - and used as a cue for postural control In striking contrast to the results gained using PF specimens according to which otolith asymmetry differences in the size and calcium incorporation of the inner ear stones between the left and right side of the body was significantly higher in kinetotic specimens as compared to normally swimming fish a comparable asymmetry between the kinetotically and normally swimming drop-tower samples could statistically not be verified Anken et al Adv Space Res submitted The present study was designed to further elucidate the role of otolith asymmetry concerning an individually different
State of the art on granular sludge by using bibliometric analysis.

PubMed

Zheng, Tianlong; Li, Pengyu; Wu, Wenjun; Liu, Jianguo; Shi, Zhining; Guo, Xuesong; Liu, Junxin

2018-04-01

With rapid industrialization and urbanization in the nineteenth century, the activated sludge process (ASP) has experienced significant steps forward in the face of greater awareness of and sensitivity toward water-related environmental problems. Compared with conventional flocculent ASP, the major advantages of granular sludge are characterized by space saving and resource recovery, where the methane and hydrogen recovery in anaerobic granular and 50% more space saving, 30-50% of energy consumption reduction, 75% of footprint cutting, and even alginate recovery in aerobic granular. Numerous engineers and scientists have made great efforts to explore the superiority over the last 40 years. Therefore, a bibliometric analysis was desired to trace the global trends of granular sludge research from 1992 to 2016 indexed in the SCI-EXPANDED. Articles were published in 276 journals across 44 subject categories spanning 1420 institutes across 68 countries. Bioresource Technology (293, 11.9%), Water Research (235, 9.6%), and Applied Microbiology and Biotechnology (127, 5.2%) dominated in top three journals. The Engineering (991, 40.3%), China (906, 36.9%), and Harbin Inst Technol, China (114, 4.6%) were the most productive subject category, country, and institution, respectively. The hotspot is the emerging techniques depended on granular reactors in response to the desired removal requirements and bio-energy production (primarily in anaerobic granular sludge). In view of advanced and novel bio-analytical methods, the characteristics, functions, and mechanisms for microbial granular were further revealed in improving and innovating the granulation techniques. Therefore, a promising technique armed with strengthened treatment efficiency and efficient resource and bio-energy recovery can be achieved.
Quantification of oxide particle composition in model oxide dispersion strengthened steel alloys.

PubMed

London, A J; Lozano-Perez, S; Moody, M P; Amirthapandian, S; Panigrahi, B K; Sundar, C S; Grovenor, C R M

2015-12-01

Oxide dispersion strengthened ferritic steels (ODS) are being considered for structural components of future designs of fission and fusion reactors because of their impressive high-temperature mechanical properties and resistance to radiation damage, both of which arise from the nanoscale oxide particles they contain. Because of the critical importance of these nanoscale phases, significant research activity has been dedicated to analysing their precise size, shape and composition (Odette et al., Annu. Rev. Mater. Res. 38 (2008) 471-503 [1]; Miller et al., Mater. Sci. Technol. 29(10) (2013) 1174-1178 [2]). As part of a project to develop new fuel cladding alloys in India, model ODS alloys have been produced with the compositions, Fe-0.3Y2O3, Fe-0.2Ti-0.3Y2O3 and Fe-14Cr-0.2Ti-0.3Y2O3. The oxide particles in these three model alloys have been studied by APT in their as-received state and following ion irradiation (as a proxy for neutron irradiation) at various temperatures. In order to adequately quantify the composition of the oxide clusters, several difficulties must be managed, including issues relating to the chemical identification (ranging and variable peak-overlaps); trajectory aberrations and chemical structure; and particle sizing. This paper presents how these issues can be addressed by the application of bespoke data analysis tools and correlative microscopy. A discussion follows concerning the achievable precision in these measurements, with reference to the fundamental limiting factors. Copyright © 2015 Elsevier B.V. All rights reserved.
Measuring time of flight of fusion products in an inertial electrostatic confinement fusion device for spatial profiling of fusion reactions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donovan, D. C.; Boris, D. R.; Kulcinski, G. L.

2013-03-15

A new diagnostic has been developed that uses the time of flight (TOF) of the products from a nuclear fusion reaction to determine the location where the fusion reaction occurred. The TOF diagnostic uses charged particle detectors on opposing sides of the inertial electrostatic confinement (IEC) device that are coupled to high resolution timing electronics to measure the spatial profile of fusion reactions occurring between the two charged particle detectors. This diagnostic was constructed and tested by the University of Wisconsin-Madison Inertial Electrostatic Confinement Fusion Group in the IEC device, HOMER, which accelerates deuterium ions to fusion relevant energies inmore » a high voltage ({approx}100 kV), spherically symmetric, electrostatic potential well [J. F. Santarius, G. L. Kulcinski, R. P. Ashley, D. R. Boris, B. B. Cipiti, S. K. Murali, G. R. Piefer, R. F. Radel, T. E. Radel, and A. L. Wehmeyer, Fusion Sci. Technol. 47, 1238 (2005)]. The TOF diagnostic detects the products of D(d,p)T reactions and determines where along a chord through the device the fusion event occurred. The diagnostic is also capable of using charged particle spectroscopy to determine the Doppler shift imparted to the fusion products by the center of mass energy of the fusion reactants. The TOF diagnostic is thus able to collect spatial profiles of the fusion reaction density along a chord through the device, coupled with the center of mass energy of the reactions occurring at each location. This provides levels of diagnostic detail never before achieved on an IEC device.« less
New Insight into the Local Structure of Hydrous Ferric Arsenate Using Full-Potential Multiple Scattering Analysis, Density Functional Theory Calculations, and Vibrational Spectroscopy.

PubMed

Wang, Shaofeng; Ma, Xu; Zhang, Guoqing; Jia, Yongfeng; Hatada, Keisuke

2016-11-15

Hydrous ferric arsenate (HFA) is an important arsenic-bearing precipitate in the mining-impacted environment and hydrometallurgical tailings. However, there is no agreement on its local atomic structure. The local structure of HFA was reprobed by employing a full-potential multiple scattering (FPMS) analysis, density functional theory (DFT) calculations, and vibrational spectroscopy. The FPMS simulations indicated that the coordination number of the As-Fe, Fe-As, or both in HFA was approximately two. The DFT calculations constructed a structure of HFA with the formula of Fe(HAsO 4 ) x (H 2 AsO 4 ) 1-x (OH) y ·zH 2 O. The presence of protonated arsenate in HFA was also evidenced by vibrational spectroscopy. The As and Fe K-edge X-ray absorption near-edge structure spectra of HFA were accurately reproduced by FPMS simulations using the chain structure, which was also a reasonable model for extended X-Ray absorption fine structure fitting. The FPMS refinements indicated that the interatomic Fe-Fe distance was approximately 5.2 Å, consistent with that obtained by Mikutta et al. (Environ. Sci. Technol. 2013, 47 (7), 3122-3131) using wavelet analysis. All of the results suggested that HFA was more likely to occur as a chain with AsO 4 tetrahedra and FeO 6 octahedra connecting alternately in an isolated bidentate-type fashion. This finding is of significance for understanding the fate of arsenic and the formation of ferric arsenate minerals in an acidic environment.
Relativistic R -matrix calculations for the electron-impact excitation of neutral molybdenum

NASA Astrophysics Data System (ADS)

Smyth, R. T.; Johnson, C. A.; Ennis, D. A.; Loch, S. D.; Ramsbottom, C. A.; Ballance, C. P.

2017-10-01

A recent PISCES-B Mod experiment [Nishijima et al., J. Phys. B 43, 225701 (2010), 10.1088/0953-4075/43/22/225701] has revealed up to a factor of 5 discrepancy between measurement and the two existing theoretical models [Badnell et al., J. Phys. B 29, 3683 (1996), 10.1088/0953-4075/29/16/014; Bartschat et al., J. Phys. B 35, 2899 (2002), 10.1088/0953-4075/35/13/305], providing important diagnostics for Mo i. In the following paper we address this issue by employing a relativistic atomic structure and R -matrix scattering calculations to improve upon the available models for future applications and benchmark results against a recent Compact Toroidal Hybrid experiment [Hartwell et al., Fusion Sci. Technol. 72, 76 (2017), 10.1080/15361055.2017.1291046]. We determine the atomic structure of Mo i using grasp0, which implements the multiconfigurational Dirac-Fock method. Fine structure energies and radiative transition rates are presented and compared to existing experimental and theoretical values. The electron-impact excitation of Mo i is investigated using the relativistic R -matrix method and the parallel versions of the Dirac atomic R -matrix codes. Electron-impact excitation cross sections are presented and compared to the few available theoretical cross sections. Throughout, our emphasis is on improving the results for the z 1,2,3o5P →a S52,z 2,3,4o7P → a S73 and y 2,3,4o7P → a S73 electric dipole transitions of particular relevance for diagnostic work.
Production of internal transport barriers via self-generated mean flows in Alcator C-Moda)

NASA Astrophysics Data System (ADS)

Fiore, C. L.; Ernst, D. R.; Podpaly, Y. A.; Mikkelsen, D.; Howard, N. T.; Lee, Jungpyo; Reinke, M. L.; Rice, J. E.; Hughes, J. W.; Ma, Y.; Rowan, W. L.; Bespamyatnov, I.

2012-05-01

New results suggest that changes observed in the intrinsic toroidal rotation influence the internal transport barrier (ITB) formation in the Alcator C-Mod tokamak [E. S. Marmar and Alcator C-Mod group, Fusion Sci. Technol. 51, 261 (2007)]. These arise when the resonance for ion cyclotron range of frequencies (ICRF) minority heating is positioned off-axis at or outside of the plasma half-radius. These ITBs form in a reactor relevant regime, without particle or momentum injection, with Ti ≈ Te, and with monotonic q profiles (qmin < 1). C-Mod H-mode plasmas exhibit strong intrinsic co-current rotation that increases with increasing stored energy without external drive. When the resonance position is moved off-axis, the rotation decreases in the center of the plasma resulting in a radial toroidal rotation profile with a central well which deepens and moves farther off-axis when the ICRF resonance location reaches the plasma half-radius. This profile results in strong E × B shear (>1.5 × 105 rad/s) in the region where the ITB foot is observed. Gyrokinetic analyses indicate that this spontaneous shearing rate is comparable to the linear ion temperature gradient (ITG) growth rate at the ITB location and is sufficient to reduce the turbulent particle and energy transport. New and detailed measurement of the ion temperature demonstrates that the radial profile flattens as the ICRF resonance position moves off axis, decreasing the drive for the ITG the instability as well. These results are the first evidence that intrinsic rotation can affect confinement in ITB plasmas.
Ultra-high-speed 3D astigmatic particle tracking velocimetry: application to particle-laden supersonic impinging jets

NASA Astrophysics Data System (ADS)

Buchmann, N. A.; Cierpka, C.; Kähler, C. J.; Soria, J.

2014-11-01

The paper demonstrates ultra-high-speed three-component, three-dimensional (3C3D) velocity measurements of micron-sized particles suspended in a supersonic impinging jet flow. Understanding the dynamics of individual particles in such flows is important for the design of particle impactors for drug delivery or cold gas dynamic spray processing. The underexpanded jet flow is produced via a converging nozzle, and micron-sized particles ( d p = 110 μm) are introduced into the gas flow. The supersonic jet impinges onto a flat surface, and the particle impact velocity and particle impact angle are studied for a range of flow conditions and impingement distances. The imaging system consists of an ultra-high-speed digital camera (Shimadzu HPV-1) capable of recording rates of up to 1 Mfps. Astigmatism particle tracking velocimetry (APTV) is used to measure the 3D particle position (Cierpka et al., Meas Sci Technol 21(045401):13, 2010) by coding the particle depth location in the 2D images by adding a cylindrical lens to the high-speed imaging system. Based on the reconstructed 3D particle positions, the particle trajectories are obtained via a higher-order tracking scheme that takes advantage of the high temporal resolution to increase robustness and accuracy of the measurement. It is shown that the particle velocity and impingement angle are affected by the gas flow in a manner depending on the nozzle pressure ratio and stand-off distance where higher pressure ratios and stand-off distances lead to higher impact velocities and larger impact angles.
Analytical Solution for Reactive Solute Transport Considering Incomplete Mixing

NASA Astrophysics Data System (ADS)

Bellin, A.; Chiogna, G.

2013-12-01

The laboratory experiments of Gramling et al. (2002) showed that incomplete mixing at the pore scale exerts a significant impact on transport of reactive solutes and that assuming complete mixing leads to overestimation of product concentration in bimolecular reactions. We consider here the family of equilibrium reactions for which the concentration of the reactants and the product can be expressed as a function of the mixing ratio, the concentration of a fictitious non reactive solute. For this type of reactions we propose, in agreement with previous studies, to model the effect of incomplete mixing at scales smaller than the Darcy scale assuming that the mixing ratio is distributed within an REV according to a Beta distribution. We compute the parameters of the Beta model by imposing that the mean concentration is equal to the value that the concentration assumes at the continuum Darcy scale, while the variance decays with time as a power law. We show that our model reproduces the concentration profiles of the reaction product measured in the Gramling et al. (2002) experiments using the transport parameters obtained from conservative experiments and an instantaneous reaction kinetic. The results are obtained applying analytical solutions both for conservative and for reactive solute transport, thereby providing a method to handle the effect of incomplete mixing on multispecies reactive solute transport, which is simpler than other previously developed methods. Gramling, C. M., C. F. Harvey, and L. C. Meigs (2002), Reactive transport in porous media: A comparison of model prediction with laboratory visualization, Environ. Sci. Technol., 36(11), 2508-2514.
New Low-Temperature Magnetic Data Acquired on Synthetic Lepidocrocite

NASA Astrophysics Data System (ADS)

Guyodo, Y.; Bonville, P.; Ona-Nguema, G.; Carvallo, C.; Wang, Y.; Morin, G.

2007-12-01

Lepidocrocite (γ-FeOOH) is an iron oxyhydroxide commonly found in the environment, which is assumed to be antiferromagnetic with a small ferromagnetic-like behavior and a Néel temperature of about 50K (e.g., Hirt et al., 2002, JGR, 107, 10.1029/2001JB000242). It is currently used as starting material in bio- reduction experiments leading to the formation of Fe(II)-bearing minerals such as green rusts, magnetite, and siderite (e.g., Ona-Nguema et al., 2002, Environ. Sci. Technol., 36, 16-20). Both initial and resulting materials are being characterized using various techniques including low-temperature magnetic methods. At this meeting, results obtained on the initial synthetic lepidocrocite samples will be presented, which describe an unusual magnetic behavior. In particular, field cooled and zero field cooled induced magnetization curves (obtained using a 5mT magnetic induction) merge at a temperature around 150K (well above 50K). Below this temperature, the difference between the two curves can be qualified as a remanent magnetization, acquired during cooling of the sample in the presence of a magnetic field. As a consequence, some ferromagnetic-like behavior persists at temperatures above the admitted Néel temperature. The cooling/warming cycle of the room temperature remanent magnetization (acquired using a 2.5T magnetic induction) also indicates that some remanence can be acquired well above that temperature. Other types of measurement have been performed in order to better constrain the low-temperature magnetic behavior of these samples, in particular using a high-field VSM.
Fast SiPM Readout of the PANDA TOF Detector

NASA Astrophysics Data System (ADS)

Böhm, M.; Lehmann, A.; Motz, S.; Uhlig, F.

2016-05-01

For the identification of low momentum charged particles and for event timing purposes a barrel Time-of-Flight (TOF) detector surrounding the interaction point is planned for the PANDA experiment at FAIR . Since the boundary conditions in terms of available radial space and radiation length are quite strict the favored layout is a hodoscope composed of several thousand small scintillating tiles (SciTils) read out by silicon photomultipliers (SiPMs). A time resolution of well below 100 ps is aimed for. With the originally proposed 30 × 30 × 5 mm3 SciTils read out by two single 3 × 3 mm2 SiPMs at the rims of the scintillator the targeted time resolution can be just reached, but with a considerable position dependence across the scintillator surface. In this paper we discuss other design options to further improve the time resolution and its homogeneity. It will be shown that wide scintillating rods (SciRods) with a size of, e.g., 50 × 30 × 5 mm3 or longer and read out at opposite sides by a chain of four serially connected SiPMs a time resolution down to 50 ps can be reached without problems. In addition, the position dependence of the time resolution is negligible. These SciRods were tested in the laboratory with electrons of a 90Sr source and under real experimental conditions in a particle beam at CERN. The measured time resolutions using fast BC418 or BC420 plastic scintillators wrapped in aluminum foil were consistently between 45 and 75 ps dependent on the SciRod design. This is a significant improvement compared to the original SciTil layout.
Olfactory ensheathing cell transplantation for spinal cord injury: An 18-year bibliometric analysis based on the Web of Science.

PubMed

Leng, Zikuan; He, Xijing; Li, Haopeng; Wang, Dong; Cao, Kai

2013-05-15

Olfactory ensheathing cell (OEC) transplantation is a promising new approach for the treatment of spinal cord injury (SCI), and an increasing number of scientific publications are devoted to this treatment strategy. This bibliometric analysis was conducted to assess global research trends in OEC transplantation for SCI. All of the data in this study originate from the Web of Science maintained by the Institute for Scientific Information, USA, and includes SCI-EXPANDED, SSCI, A&HCI, CPCI-S, CPCI-SSH, BKCI-S, BKCI-SSH, CCR-EXPANDED and IC. The Institute for Scientific Information's Web of Science was searched using the keywords "olfactory ensheathing cells" or "OECs" or "olfactory ensheathing glia" or "OEG" or "olfactory ensheathing glial cells" or "OEGs" and "spinal cord injury" or "SCI" or "spinal injury" or "spinal transection" for literature published from January 1898 to May 2012. Original articles, reviews, proceedings papers and meeting abstracts, book chapters and editorial materials on OEC transplantation for SCI were included. Simultaneously, unpublished literature and literature for which manual information retrieval was required were excluded. ALL SELECTED LITERATURES ADDRESSING OEC TRANSPLANTATION FOR SCI WERE EVALUATED IN THE FOLLOWING ASPECTS: publication year, document type, language, author, institution, times cited, Web of Science category, core source title, countries/territories and funding agency. In the Web of Science published by the Institute for Scientific Information, the earliest literature record was in April, 1995. Four hundred and fourteen publications addressing OEC transplantation for SCI were added to the data library in the past 18 years, with an annually increasing trend. Of 415 records, 405 publications were in English. Two hundred and fifty-nine articles ranked first in the distribution of document type, followed by 141 reviews. Thirty articles and 20 reviews, cited more than 55 times by the date the publication data were downloaded by us, can be regarded as the most classical references. The journal Experimental Neurology published the most literature (32 records), followed by Glia. The United States had the most literature, followed by China. In addition, Yale University was the most productive institution in the world, while The Second Military Medical University contributed the most in China. The journal Experimental Neurology published the most OEC transplantation literature in the United States, while Neural Regeneration Research published the most in China. This analysis provides insight into the current state and trends in OEC transplantation for SCI research. Furthermore, we anticipate that this analysis will help encourage international cooperation and teamwork on OEC transplantation for SCI to facilitate the development of more effective treatments for SCI.
Participatory Design of an Online Self-Management Tool for Users With Spinal Cord Injury: Qualitative Study

PubMed Central

Shepherd, John; Tomasone, Jennifer; Munce, Sarah; Linassi, Gary; Hossain, Saima Noreen; Jaglal, Susan

2018-01-01

Background Rehospitalization rates resulting from secondary conditions in persons with spinal cord injuries (SCI) are high. Self-management programs for many chronic conditions have been associated with decreases in hospital readmissions. However, in the SCI community, evidence suggests that satisfaction with traditional self-management programs is low. Users with SCI have indicated preference for programs that are online (rather than in-person), that target SCI-specific concerns, and are led by peers with SCI. There is currently no program with all of these features, which addresses self-management of secondary conditions after SCI. Objective The aim of this study was to provide details of a participatory design (PD) process for an internet-mediated self-management program for users with SCI (called SCI & U) and illustrate how it has been used to define design constraints and solutions. Methods Users were involved in development as codesigners, codevelopers, and key informants. Codesigners and codevelopers were recruited from consumer advocacy groups and worked with a core development team. Key informants were recruited from geographically distributed advocacy groups to form a product advisory council that met regularly with the core team. During meetings, codesigners and informants walked through stages of work that typify PD processes such as exploration, discovery, and prototyping. This paper details the process by analyzing 10 meetings that took place between August 2015 and May 2016. Meetings were recorded, transcribed, and subjected to an inductive thematic analysis; resulting themes were organized according to their relationship to PD stages. Results A total of 16 individuals participated in meeting discussions, including 7 researchers and 9 persons with SCI from 4 Canadian provinces. Themes of trust, expertise, and community emerged in every group discussion. The exploration stage revealed interest in online self-management resources coupled with concerns about information credibility. In general, participants indicated that they felt more confident with information received from trusted, in-person sources (eg, peers or health care professionals) than information found online. The discovery stage saw participants propose and discuss concepts to filter credible information and highlight community expertise, namely (1) a community-curated resource database, (2) online information navigators, and (3) group chats with peers. Several tools and techniques were collectively prototyped in an effort to foster trust and community; these are illustrated in the Results section. Conclusions A PD process engaging users as codesigners, codevelopers, and informants can be used to identify design concerns and prototype online solutions to promote self-management after SCI. Future work will assess the usability of the collectively designed tools among a broad population of Canadians with SCI and the tools’ impact on self-efficacy and health. PMID:29563075
An area-preserving mapping in natural canonical coordinates for magnetic field line trajectories in the DIII-D tokamak

NASA Astrophysics Data System (ADS)

Punjabi, Alkesh

2009-11-01

The new approach of integrating magnetic field line trajectories in natural canonical coordinates (Punjabi and Ali 2008 Phys. Plasmas 15 122502) in divertor tokamaks is used for the DIII-D tokamak (Luxon and Davis1985 Fusion Technol. 8 441). The equilibrium EFIT data (Evans et al 2004 Phys. Rev. Lett. 92 235003, Lao et al 2005 Fusion Sci. Technol. 48 968) for the DIII-D tokamak shot 115467 at 3000 ms is used to construct the equilibrium generating function (EGF) for the DIII-D in natural canonical coordinates. The EGF gives quite an accurate representation of the closed and open equilibrium magnetic surfaces near the separatrix, the separatrix, the position of the X-point and the poloidal magnetic flux inside the ideal separatrix in the DIII-D. The equilibrium safety factor q from the EGF is somewhat smaller than the DIII-D EFIT q profile. The equilibrium safety factor is calculated from EGF as described in the previous paper (Punjabi and Ali 2008 Phys. Plasmas 15 122502). Here the safety factor for the open surfaces in the DIII-D is calculated. A canonical transformation is used to construct a symplectic mapping for magnetic field line trajectories in the DIII-D in natural canonical coordinates. The map is explored in more detail in this work, and is used to calculate field line trajectories in the DIII-D tokamak. The continuous analogue of the map does not distort the DIII-D magnetic surfaces in different toroidal planes between successive iterations of the map. The map parameter k can represent effects of magnetic asymmetries in the DIII-D. These effects in the DIII-D are illustrated. The DIII-D map is then used to calculate stochastic broadening of the ideal separatrix from the topological noise and field errors, the low mn, the high mn and peeling-ballooning magnetic perturbations in the DIII-D. The width of the stochastic layer scales as 1/2 power of amplitude with a maximum deviation of 6% from the Boozer-Rechester scaling (Boozer and Rechester 1978 Phys. Fluids 21 682). The loss of poloidal flux scales linearly with the amplitude of perturbation with a maximum deviation of 10% from linearity. Perturbations with higher mode numbers result in higher stochasticity. The higher the complexity and coupling in the equilibrium magnetic geometry, the closer is the scaling to the Boozer-Rechester scaling of width. The comparison of the EGF for the simple map (Punjabi et al 1992 Phys. Rev. Lett. 69 3322) with that of the DIII-D shows that the more complex the magnetic geometry and the more coupling of modes in equilibrium, the more robust or resilient is the system against the chaos-inducing, symmetry-breaking perturbations.
In delicate balance: stem cells and spinal cord injury advocacy.

PubMed

Parke, Sara; Illes, Judy

2011-09-01

Spinal cord injury (SCI) is a major focus for stem cell therapy (SCT). However, the science of SCT has not been well matched with an understanding of perspectives of persons with SCI. The online advocacy community is a key source of health information for primary stakeholders and their caregivers. In this study, we sought to characterize the content of SCI advocacy websites with respect to their discussion of SCT and stem cell tourism. We performed a comprehensive analysis of SCI advocacy websites identified through a web search and verified by expert opinion. Two independent researchers coded the information for major themes (e.g., scientific & clinical facts, research & funding, policy, ethics) and valence (positive, negative, balanced, neutral). Of the 40 SCI advocacy websites that met inclusion criteria, 50% (N=20) contained information about SCT. Less than 18% (N=7) contained information on stem cell tourism. There were more than ten times as many statements about SCT with a positive valence (N=67) as with a negative valence (N=6). Ethics-related SCT information comprised 20% (N=37) of the total content; the largest proportion of ethics-related content was devoted to stem cell tourism (80%, N=30 statements). Of those, the majority focused on the risks of stem cell tourism (N=16). Given the still-developing science behind SCT, the presence of cautionary information about stem cell tourism at advocacy sites is ethically appropriate. The absence of stem cell tourism information at the majority of advocacy sites represents a lost educational opportunity.
Nitrogen and Triple Oxygen Isotopic Analyses of Atmospheric Particulate Nitrate over the Pacific Ocean

NASA Astrophysics Data System (ADS)

Kamezaki, Kazuki; Hattori, Shohei; Iwamoto, Yoko; Ishino, Sakiko; Furutani, Hiroshi; Miki, Yusuke; Miura, Kazuhiko; Uematsu, Mitsuo; Yoshida, Naohiro

2017-04-01

Nitrate plays a significant role in the biogeochemical cycle. Atmospheric nitrate (NO3- and HNO3) are produced by reaction precursor as NOx (NO and NO2) emitted by combustion, biomass burning, lightning, and soil emission, with atmospheric oxidants like ozone (O3), hydroxyl radical (OH), peroxy radical and halogen oxides. Recently, industrial activity lead to increases in the concentrations of nitrogen species (NOx and NHy) throughout the environment. Because of the increase of the amount of atmospheric nitrogen deposition, the oceanic biogeochemical cycle are changed (Galloway et al., 2004; Kim et al., 2011). However, the sources and formation pathways of atmospheric nitrate are still uncertain over the Pacific Ocean because the long-term observation is limited. Stable isotope analysis is useful tool to gain information of sources, sinks and formation pathways. The nitrogen stable isotopic composition (δ15N) of atmospheric particulate NO3- can be used to posses information of its nitrogen sources (Elliott et al., 2007). Triple oxygen isotopic compositions (Δ17O = δ17O - 0.52 ×δ18O) of atmospheric particulate NO3- can be used as tracer of the relative importance of mass-independent oxygen bearing species (e.g. O3, BrO; Δ17O ≠ 0 ‰) and mass-dependent oxygen bearing species (e.g. OH radical; Δ17O ≈ 0 ‰) through the formation processes from NOx to NO3- in the atmosphere (Michalski et al., 2003; Thiemens, 2006). Here, we present the isotopic compositions of atmospheric particulate NO3- samples collected over the Pacific Ocean from 40˚ S to 68˚ N. We observed significantly low δ15N values for atmospheric particulate NO3- on equatorial Pacific Ocean during both cruises. Although the data is limited, combination analysis of δ15N and Δ17O values for atmospheric particulate NO3- showed the possibility of the main nitrogen source of atmospheric particulate NO3- on equatorial Pacific Ocean is ammonia oxidation in troposphere. Furthermore, the Δ17O values for atmospheric particulate NO3- originated from Central North Pacific Ocean showed the possibility of atmospheric particulate NO3- formation pathway is reaction NO2 with halogen oxides. At the presentation, we discuss the sources and formation pathways of atmospheric particulate NO3- by using stable isotopic analyses for each region. References J. N. Galloway, A. R. Townsend, J. Willem Erisman, M. Bekunda, Z. Cai, J. R. Freney, L. A. Martinelli, S. P. Seitzinger, M. A. Sutton, Biogeochemistry, 70, 153-226, 2004 T. W. Kim, K. Lee, R. G. Najjar, H.D. Jeong, H. J. Jeong, Science 334, 505-509, 2011 E. M. Elliott, C. Kendall, S. D. Wankel, D. A. Burns, E. W. Boyer, K. Harlin, D. J. Bain, and T. J. Butler, Environ. Sci. Technol., 41, 7661-7667, 2007 G. Michalski, Z. Scott, M. Kabiling, and M. H. Thiemens, Geophys. Res. Lett., 30, 1870, 2003 M. H. Thiemens, Annu. Rev. Earth Planet. Sc., 34, 217-262, 2006
Emission of Polychlorinated Naphthalenes during Thermal Related Processes

NASA Astrophysics Data System (ADS)

Liu, Guorui; Zheng, Minghui; Du, Bing; Liu, Wenbin; Zhang, Bing; Xiao, Ke

2010-05-01

Due to the structural similarity of polychlorinated naphthalenes (PCNs) to those of dioxins, PCNs exhibit toxicological properties similar to dioxins (Olivero-Verbel et al., 2004). Based on their high toxicity, persistence, bioaccumulation, and long-distance transmission, PCNs were also selected as a candidate POP for the UN-ECE (United Nations Economic Commission for Europe) POP protocol (Lerche et al., 2002). In addition, some studies suggested that PCNs contributed a greater proportion of the dioxin-like activity than polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) contributed in some locations (Kannan et al., 1998). However, the identification and quantitation for PCN sources are very scarce compared with PCDD/Fs. Understanding the emission levels and developing the emission inventory of PCNs is important for regulatory and source reduction purposes. In this study, several potential sources were preliminarily investigated for PCN release. Coking process (CP), iron ore sintering (IOS), and electric arc furnace steel making units (AF) were selected due to their huge activity level of industrial production in China. Municipal solid waste incineration (MSWI) and medical waste incineration (MWI) were also investigated because of the possible high concentration of PCNs in stack gas. Two plants were investigated for each thermal related process, except for MWI with one incinerator was investigated. The stack gas samples were collected by automatic isokinetic sampling system (Isostack Basic, TCR TECORA, Milan Italy). Isotope dilution high resolution gas chromatography coupled with high resolution mass spectrometry (HRGC/HRMS) technique was used for the identification and quantitation of PCN congeners. The concentrations of PCNs from the selected thermal processes were determined in this study. The average concentrations of total PCNs were 26 ng Nm-3 for CP, 65 ng Nm-3 for IOS, 720 ng Nm-3 for AF, 443 ng Nm-3 for MSWI, and 45 ng Nm-3 for MWI. The emission factors of PCNs were derived, and the average values were 6 μg tonne-1 for CP, 42 μg tonne-1 for IOS, 2980 μg tonne-1 for AF, 1354 μg tonne-1 for MSWI, and 937 μg tonne-1 for MWI, which could be helpful for estimating the annual emission amounts of PCNs from the investigated sources. However, since the investigated plant numbers for each process are limited, there might be large uncertainties when developing the PCN emission inventory. From the obtained data in the preliminary investigation, it could be seen that these investigated sources are worthy of further concerns for PCN emission. Further investigation on PCN release from thermal related process is still in process. References Kannan, K., Imagawa, T., Blankenship, A.L., et al., 1998. Isomer-specific analysis and toxic evaluation of polychlorinated naphthalenes in soil, sediment, and biota collected near the site of a former chlor-alkali plant. Environ Sci Technol 32, 2507-2514. Lerche, D., van de Plassche, E., Schwegler, A., et al., 2002. Selecting chemical substances for the UN-ECE POP protocol. Chemosphere 47, 617-630. Olivero-Verbel, J., Vivas-Reyes, R., Pacheco-Londono, et al., 2004. Discriminant analysis for activation of the aryl hydrocarbon receptor by polychlorinated naphthalenes. J Mol Struc-Theochem 678, 157-161.

Army Reserve Component Personalized Empowerment Program (ARCPEP)

DTIC Science & Technology

2010-10-01

in U.S. hospitals—2007. Am J Health Syst Pharm 2008; 65:2244-64 2. Hardiker NR, Grant MJ. Barriers and facilitators that affect public engagement with eHealth services. Stud Health Technol Inform 2010; 160:13-7
The contribution of different information sources for adverse effects data.

PubMed

Golder, Su; Loke, Yoon K

2012-04-01

The aim of this study is to determine the relative value and contribution of searching different sources to identify adverse effects data. The process of updating a systematic review and meta-analysis of thiazolidinedione-related fractures in patients with type 2 diabetes mellitus was used as a case study. For each source searched, a record was made for each relevant reference included in the review noting whether it was retrieved with the search strategy used and whether it was available but not retrieved. The sensitivity, precision, and number needed to read from searching each source and from different combinations of sources were also calculated. There were 58 relevant references which presented sufficient numerical data to be included in a meta-analysis of fractures and bone mineral density. The highest number of relevant references were retrieved from Science Citation Index (SCI) (35), followed by BIOSIS Previews (27) and EMBASE (24). The precision of the searches varied from 0.88% (Scirus) to 41.67% (CENTRAL). With the search strategies used, the minimum combination of sources required to retrieve all the relevant references was; the GlaxoSmithKline (GSK) website, Science Citation Index (SCI), EMBASE, BIOSIS Previews, British Library Direct, Medscape DrugInfo, handsearching and reference checking, AHFS First, and Thomson Reuters Integrity or Conference Papers Index (CPI). In order to identify all the relevant references for this case study a number of different sources needed to be searched. The minimum combination of sources required to identify all the relevant references did not include MEDLINE.
Unified Scaling Law for flux pinning in practical superconductors: II. Parameter testing, scaling constants, and the Extrapolative Scaling Expression

NASA Astrophysics Data System (ADS)

Ekin, Jack W.; Cheggour, Najib; Goodrich, Loren; Splett, Jolene; Bordini, Bernardo; Richter, David

2016-12-01

A scaling study of several thousand Nb3Sn critical-current (I c) measurements is used to derive the Extrapolative Scaling Expression (ESE), a relation that can quickly and accurately extrapolate limited datasets to obtain full three-dimensional dependences of I c on magnetic field (B), temperature (T), and mechanical strain (ɛ). The relation has the advantage of being easy to implement, and offers significant savings in sample characterization time and a useful tool for magnet design. Thorough data-based analysis of the general parameterization of the Unified Scaling Law (USL) shows the existence of three universal scaling constants for practical Nb3Sn conductors. The study also identifies the scaling parameters that are conductor specific and need to be fitted to each conductor. This investigation includes two new, rare, and very large I c(B,T,ɛ) datasets (each with nearly a thousand I c measurements spanning magnetic fields from 1 to 16 T, temperatures from ˜2.26 to 14 K, and intrinsic strains from -1.1% to +0.3%). The results are summarized in terms of the general USL parameters given in table 3 of Part 1 (Ekin J W 2010 Supercond. Sci. Technol. 23 083001) of this series of articles. The scaling constants determined for practical Nb3Sn conductors are: the upper-critical-field temperature parameter v = 1.50 ± 0.04 the cross-link parameter w = 3.0 ± 0.3 and the strain curvature parameter u = 1.7 ± 0.1 (from equation (29) for b c2(ɛ) in Part 1). These constants and required fitting parameters result in the ESE relation, given by I c ( B , T , ɛ ) B = C [ b c 2 ( ɛ ) ] s ( 1 - t 1.5 ) η - μ ( 1 - t 2 ) μ b p ( 1 - b ) q with reduced magnetic field b ≡ B/B c2*(T,ɛ) and reduced temperature t ≡ T/T c*(ɛ), where: B c 2 * ( T , ɛ ) = B c 2 * ( 0 , 0 ) ( 1 - t 1.5 ) b c 2 ( ɛ ) T c * ( ɛ ) = T c * ( 0 ) [ b c 2 ( ɛ ) ] 1/3 and fitting parameters: C, B c2*(0,0), T c*(0), s, either η or μ (but not both), plus the parameters in the strain function b c2(ɛ). The pinning-force shape parameters p and q are also preferably fitted (simultaneously with the other parameters), but default values p = 0.5 and q = 2.0 also give high fitting accuracy when the range of relative magnetic fields is not extensive. Default values are also essential when the magnetic field data range is insufficient to determine p and q. The scaling constants are remarkably stable (changes less than ˜1%) with respect to different values of p and q, Nb3Sn conductor configurations, magnetic self-field corrections, and pinning-force trim values. The results demonstrate that the scaling of transport critical current holds down to the lowest temperatures measured ˜2.2 K, for both magnetic self-field corrected and uncorrected data. An initial comparison is also made between transport and magnetization scaling data in matched Nb3Sn samples and significant differences are found, especially for the upper critical field B c2*(T,ɛ), which may be a result of inhomogeneous shielding currents. In Part 3 of this topical review series (Ekin J W 2017 Supercond. Sci. Technol. at press), the smallest practical minimum dataset for extrapolating full I c(B,T,ɛ) datasets is derived. Application of the ESE relation is illustrated in several new areas, including full characterization of Nb3Sn conductors from as little as a single I c(B) curve when a few core parameters have been determined for similar conductors.
Forensic use of photo response non-uniformity of imaging sensors and a counter method.

PubMed

Dirik, Ahmet Emir; Karaküçük, Ahmet

2014-01-13

Analogous to use of bullet scratches in forensic science, the authenticity of a digital image can be verified through the noise characteristics of an imaging sensor. In particular, photo-response non-uniformity noise (PRNU) has been used in source camera identification (SCI). However, this technique can be used maliciously to track or inculpate innocent people. To impede such tracking, PRNU noise should be suppressed significantly. Based on this motivation, we propose a counter forensic method to deceive SCI. Experimental results show that it is possible to impede PRNU-based camera identification for various imaging sensors while preserving the image quality.
Life cycle assessment in support of sustainable transportation

NASA Astrophysics Data System (ADS)

Eckelman, Matthew J.

2013-06-01

In our rapidly urbanizing world, sustainable transportation presents a major challenge. Transportation decisions have considerable direct impacts on urban society, both positive and negative, for example through changes in transit times and economic productivity, urban connectivity, tailpipe emissions and attendant air quality concerns, traffic accidents, and noise pollution. Much research has been dedicated to quantifying these direct impacts for various transportation modes. Transportation planning decisions also result in a variety of indirect environmental and human health impacts, a portion of which can accrue outside of the transit service area and so outside of the local decision-making process. Integrated modeling of direct and indirect impacts over the life cycle of different transportation modes provides decision support that is more comprehensive and less prone to triggering unintended consequences than a sole focus on direct tailpipe emissions. The recent work of Chester et al (2013) in this journal makes important contributions to this research by examining the environmental implications of introducing bus rapid transit and light rail in Los Angeles using life cycle assessment (LCA). Transport in the LA region is dominated by automobile trips, and the authors show that potential shifts to either bus or train modes would reduce energy use and emissions of criteria air pollutants, on an average passenger mile travelled basis. This work compares not just the use of each vehicle, but also upstream impacts from its manufacturing and maintenance, as well as the construction and maintenance of the entire infrastructure required for each mode. Previous work by the lead author (Chester and Horvath 2009), has shown that these non-operational sources and largely non-local can dominate life cycle impacts from transportation, again on an average (or attributional) basis, for example increasing rail-related GHG emissions by >150% over just operational emissions. While average results are valuable in comparing transport modes generally, they are less representative of local planning decisions, where the focus is on understanding the consequences of new infrastructure and how it might affect traffic, community impacts, and environmental aspects going forward. Chester et al (2013) also present their results using consequential LCA, which provides more detailed insights about the marginal effects of the specific rapid bus and light rail lines under study. The trade-offs between the additional resources required to install the public transit infrastructure (the 'resource debt') and the environmental advantages during the operation of these modes can be considered explicitly in terms of environmental impact payback periods, which vary with the type of environmental impact being considered. For example, bus rapid transit incurs a relatively small carbon debt associated with the GHG emissions of manufacturing new buses and installing transit infrastructure and pays this debt off almost immediately, while it takes half a century for the light rail line to pay off the 'smog debt' of its required infrastructure. This payback period approach, ubiquitous in life cycle costing, has been useful for communicating the magnitude of unintended environmental consequences from other resource and land management decisions, e.g., the release of soil carbon from land conversion to bioenergy crops (Fargione et al 2008), and will likely grow in prevalence as consequential LCA is used for decision support. The locations of projected emissions is just as important to decision-making as their magnitudes, as policy-making bodies seek to understand effects in their jurisdictions; however, life cycle impact assessment methods typically aggregate results by impact category rather than by source or sink location. Chester et al (2013) address this issue by providing both local (within Los Angeles) and total emissions results, with accompanying local-only payback periods. Much more challenging is the geographic mapping of impacts that these emissions will cause, given the many point and mobile sources of air pollutants over the entire transportation life cycle. Integration of LCA with high-resolution data sets is an active area of model development (Mutel and Hellweg 2009) and will provide site- and population-specific information for impacts ranging from water quality to biodiversity to human respiratory health. Another complex challenge in modeling environmental impacts of transportation (and cities in general) is the long run, interdependent relationship between transportation technologies and urban form. LCA modeling has tended to assume a fixed pattern of settlements and demand for mobility and then examined changes to a particular technology or practice within the transportation system, such as electric or hybrid vehicles or improved pavement materials. New transit options or other travel demand management strategies might induce mode switching or reduced trips, but the overall pattern of where people live and work is generally assumed in these models to be constant in the short run. In contrast, the automobile has been influencing land-use patterns for a century, and it is the resulting geographic structure that determines the baseline need for transportation, and thus drives the use of material and energy resources used in transportation systems (Kunstler 1994). We have seen that cities with high population densities tend to have lower tailpipe emissions from transportation (Kennedy et al 2009). Recent studies have modeled how changes in urban land-use or zoning changes the geographic structure of transportation demand and then used LCA to determine the environmental benefits of such policies. For example, Mashayekh et al (2012) summarized travel demand reductions projected from several studies of compact, smart growth, and brownfield in-fill development strategies to find benefits ranging up to 75% reductions in life cycle GHG and air pollutant emissions. A related study in Toronto on life cycle energy use and GHG emissions for high- and low-density development strategies found a ~60% difference in GHG emissions, largely due to transportation (Norman et al 2006). System dynamics and agent-based models may complement LCA in capturing long-term effects of transportation strategies as they are inherently dynamic (Stepp et al 2009), and can internalize spatially resolved decisions about where to settle and work (Waddell 2002). Transportation planning decisions have both direct and indirect, spatially distributed, often long-term effects on our health and our environment. The accompanying work by Chester et al (2013) provides a well-documented case study that highlights the potential of LCA as a rich source of decision support. References Chester M, Pincetl S, Elizabeth Z, Eisenstein W and Matute J 2013 Infrastructure and automobile shifts: positioning transit to reduce life-cycle environmental impacts for urban sustainability goals Environ. Res. Lett. 8 015041 Chester M V and Horvath A 2009 Environmental assessment of passenger transportation should include infrastructure and supply chains Environ. Res. Lett. 4 024008 Fargione J, Hill J, Tilman D, Polasky S and Hawthorne P 2008 Land clearing and the biofuel carbon debt Science 319 1235-8 Kennedy C, Steinberger J, Gasson B, Hansen Y, Hillman T, Havránek M, Pataki D, Phdungsilp A, Ramaswami A and Mendez G V 2009 Greenhouse gas emissions from global cities Environ. Sci. Technol. 43 7297-302 Kunstler J H 1994 Geography of Nowhere: The Rise and Decline of America's Man-Made Landscape (New York: Free Press) Mashayekh Y, Jaramillo P, Samaras C, Hendrickson C T, Blackhurst M, MacLean H L and Matthews H S 2012 Potentials for sustainable transportation in cities to alleviate climate change impacts Environ. Sci. Technol. 46 2529-37 Mutel C L and Hellweg S 2009 Regionalized life cycle assessment: computational methodology and application to inventory databases Environ. Sci. Technol. 43 5797-803 Norman J, MacLean H L and Kennedy C A 2006 Comparing high and low residential density: life-cycle analysis of energy use and greenhouse gas emissions J. Urban Plann. Dev. 132 10-21 Stepp M D, Winebrake J J, Hawker J S and Skerlos S J 2009 Greenhouse gas mitigation policies and the transportation sector: the role of feedback effects on policy effectiveness Energy Policy 37 2774-87 Waddell P 2002 UrbanSim: modeling urban development for land use, transportation, and environmental planning J. Am. Plann. Assoc. 68 297-314
Spectroscopic imaging of limiter heat and particle fluxes and the resulting impurity sources during Wendelstein 7-X startup plasmas

DOE PAGES

Stephey, L.; Wurden, G. A.; Schmitz, O.; ...

2016-08-08

A combined IR and visible camera system [G. A. Wurden et al., “A high resolution IR/visible imaging system for the W7-X limiter,” Rev. Sci. Instrum. (these proceedings)] and a filterscope system [R. J. Colchin et al., Rev. Sci. Instrum. 74, 2068 (2003)] were implemented together to obtain spectroscopic data of limiter and first wall recycling and impurity sources during Wendelstein 7-X startup plasmas. Both systems together provided excellent temporal and spatial spectroscopic resolution of limiter 3. Narrowband interference filters in front of the camera yielded C-III and Hα photon flux, and the filterscope system provided H α, H β, He-I,more » He-II, C-II, and visible bremsstrahlung data. The filterscopes made additional measurements of several points on the W7-X vacuum vessel to yield wall recycling fluxes. Finally, the resulting photon flux from both the visible camera and filterscopes can then be compared to an EMC3-EIRENE synthetic diagnostic [H. Frerichs et al., “Synthetic plasma edge diagnostics for EMC3-EIRENE, highlighted for Wendelstein 7-X,” Rev. Sci. Instrum. (these proceedings)] to infer both a limiter particle flux and wall particle flux, both of which will ultimately be used to infer the complete particle balance and particle confinement time τ P.« less
Bidirectional tornado modes on the Joint European Torus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandquist, P.; Sharapov, S. E.; Lisak, M.

In discharges on the Joint European Torus [P. H. Rebut and B. E. Keen, Fusion Technol. 11, 13 (1987)] with safety factor q(0)<1 and high-power ion cyclotron resonance heating (ICRH), monster sawtooth crashes are preceded by frequency sweeping 'tornado modes' in the toroidal Alfven eigenmode frequency range. A suite of equilibrium and spectral magnetohydrodynamical codes is used for explaining the observed evolution of the tornado mode frequency and for identifying temporal evolution of the safety factor inside the q=1 radius just before sawtooth crashes. In some cases, the tornado modes are observed simultaneously with both positive and negative toroidal modemore » numbers. Hence, a free energy source other than the radial gradient of the energetic ion pressure exciting these modes is sought. The distribution function of the ICRH-accelerated ions is assessed with the SELFO code [J. Hedin et al., Nucl. Fusion 42, 527 (2002)] and energetic particle drive due to the velocity space anisotropy of ICRH-accelerated ions is considered analytically as the possible source for excitation of bidirectional tornado modes.« less
Participatory Design of an Online Self-Management Tool for Users With Spinal Cord Injury: Qualitative Study.

PubMed

Allin, Sonya; Shepherd, John; Tomasone, Jennifer; Munce, Sarah; Linassi, Gary; Hossain, Saima Noreen; Jaglal, Susan

2018-03-21

Rehospitalization rates resulting from secondary conditions in persons with spinal cord injuries (SCI) are high. Self-management programs for many chronic conditions have been associated with decreases in hospital readmissions. However, in the SCI community, evidence suggests that satisfaction with traditional self-management programs is low. Users with SCI have indicated preference for programs that are online (rather than in-person), that target SCI-specific concerns, and are led by peers with SCI. There is currently no program with all of these features, which addresses self-management of secondary conditions after SCI. The aim of this study was to provide details of a participatory design (PD) process for an internet-mediated self-management program for users with SCI (called SCI & U) and illustrate how it has been used to define design constraints and solutions. Users were involved in development as codesigners, codevelopers, and key informants. Codesigners and codevelopers were recruited from consumer advocacy groups and worked with a core development team. Key informants were recruited from geographically distributed advocacy groups to form a product advisory council that met regularly with the core team. During meetings, codesigners and informants walked through stages of work that typify PD processes such as exploration, discovery, and prototyping. This paper details the process by analyzing 10 meetings that took place between August 2015 and May 2016. Meetings were recorded, transcribed, and subjected to an inductive thematic analysis; resulting themes were organized according to their relationship to PD stages. A total of 16 individuals participated in meeting discussions, including 7 researchers and 9 persons with SCI from 4 Canadian provinces. Themes of trust, expertise, and community emerged in every group discussion. The exploration stage revealed interest in online self-management resources coupled with concerns about information credibility. In general, participants indicated that they felt more confident with information received from trusted, in-person sources (eg, peers or health care professionals) than information found online. The discovery stage saw participants propose and discuss concepts to filter credible information and highlight community expertise, namely (1) a community-curated resource database, (2) online information navigators, and (3) group chats with peers. Several tools and techniques were collectively prototyped in an effort to foster trust and community; these are illustrated in the Results section. A PD process engaging users as codesigners, codevelopers, and informants can be used to identify design concerns and prototype online solutions to promote self-management after SCI. Future work will assess the usability of the collectively designed tools among a broad population of Canadians with SCI and the tools' impact on self-efficacy and health. ©Sonya Allin, John Shepherd, Jennifer Tomasone, Sarah Munce, Gary Linassi, Saima Noreen Hossain, Susan Jaglal. Originally published in JMIR Rehabilitation and Assistive Technology (http://rehab.jmir.org), 21.03.2018.
Mechanical study of the Chartreuse Fold-and-Thrust Belt: relationships between fluids overpressure and decollement within the Toarcian source-rock

NASA Astrophysics Data System (ADS)

Berthelon, Josselin; Sassi, William; Burov, Evgueni

2016-04-01

Many source-rocks are shale and constitute potential detachment levels in Fold-and-Thrust Belts (FTB): the toarcian Schistes-Cartons in the French Chartreuse FTB for example. Their mechanical properties can change during their burial and thermal maturation, as for example when large amount of hydrocarbon fluids are generated. A structural reconstruction of the Chartreuse FTB geo-history places the Toarcian Formation as the major decollement horizon. In this work, a mechanical analysis integrating the fluids overpressuring development is proposed to discuss on the validity of the structural interpretation. At first, an analogue of the Chartreuse Toarcian Fm, the albanian Posidonia Schist, is documented as it can provide insights on its initial properties and composition of its kerogen content. Laboratory characterisation documents the vertical evolution of the mineralogical, geochemical and mechanical parameters of this potential decollement layer. These physical parameters (i.e. Total Organic Carbon (TOC), porosity/permeability relationship, friction coefficient) are used to address overpressure buildup in the frontal part of the Chartreuse FTB with TEMISFlow Arctem Basin modelling approach (Faille et al, 2014) and the structural emplacement of the Chartreuse thrust units using the FLAMAR thermo-mechanical model (Burov et al, 2014). The hydro-mechanical modeling results highlight the calendar, distribution and magnitude of the overpressure that developed within the source-rock in the footwall of a simple fault-bend fold structure localized in the frontal part of the Chartreuse FTB. Several key geological conditions are required to create an overpressure able to fracture the shale-rocks and induce a significant change in the rheological behaviour: high TOC, low permeability, favourable structural evolution. These models highlight the importance of modeling the impact of a diffuse natural hydraulic fracturing to explain fluids propagation toward the foreland within the decollement layer. In turn, with the FLAMAR geo-mechanical models it is shown that for key mechanical parameters within the Chartreuse mechanical stratigraphy (such as friction coefficient, cohesion and viscosity properties), the mechanical boundary conditions to activate, localize and propagate shear thrust in the toarcian source-rock can be found to discuss on the hydro-mechanics of the structural evolution: the very weak mechanical properties that must be attributed to the source-rock to promote the formation of a decollement tend to justify the hypothesis of high fluids pressures in it. In FLAMAR, the evolution of the toarcian source-rock mechanical properties, calibrated on the temperature of kerogen-to-gas transformation, can be introduced to allow its activation as a decollement at a burial threshold. However, without hydro-mechanical coupling, it is not possible to predict where the overpressured regions that localised these changes are positioned. As such, this work also highlights the need for a fully-coupled hydro-mechanical model to further investigate the relationship between fluids and deformations in FTB and accretionary prisms. Burov, E., Francois, T., Yamato, P., & Wolf, S. (2014). Mechanisms of continental subduction and exhumation of HP and UHP rocks. Gondwana Research, 25(2), 464-493. Faille, I., Thibaut, M., Cacas, M.-C., Havé, P., Willien, F., Wolf, S., Agelas, L., Pegaz-Fiornet, S., 2014. Modeling Fluid Flow in Faulted Basins. Oil Gas Sci. Technol. - Rev. d'IFP Energies Nouv. 69, 529-553.
Rapid generation of OPC-like cells from human pluripotent stem cells for treating spinal cord injury.

PubMed

Kim, Dae-Sung; Jung, Se Jung; Lee, Jae Souk; Lim, Bo Young; Kim, Hyun Ah; Yoo, Jeong-Eun; Kim, Dong-Wook; Leem, Joong Woo

2017-07-28

Remyelination via the transplantation of oligodendrocyte precursor cells (OPCs) has been considered as a strategy to improve the locomotor deficits caused by traumatic spinal cord injury (SCI). To date, enormous efforts have been made to derive OPCs from human pluripotent stem cells (hPSCs), and significant progress in the transplantation of such cells in SCI animal models has been reported. The current methods generally require a long period of time (>2 months) to obtain transplantable OPCs, which hampers their clinical utility for patients with SCI. Here we demonstrate a rapid and efficient method to differentiate hPSCs into neural progenitors that retain the features of OPCs (referred to as OPC-like cells). We used cell sorting to select A2B5-positive cells from hPSC-derived neural rosettes and cultured the selected cells in the presence of signaling cues, including sonic hedgehog, PDGF and insulin-like growth factor-1. This method robustly generated neural cells positive for platelet-derived growth factor receptor-α (PDGFRα) and NG2 (~90%) after 4 weeks of differentiation. Behavioral tests revealed that the transplantation of the OPC-like cells into the spinal cords of rats with contusive SCI at the thoracic level significantly improved hindlimb locomotor function. Electrophysiological assessment revealed enhanced neural conduction through the injury site. Histological examination showed increased numbers of axon with myelination at the injury site and graft-derived myelin formation with no evidence of tumor formation. Our method provides a cell source from hPSCs that has the potential to recover motor function following SCI.
Small Group Employer Participation in New Mexico's State Coverage Insurance Program: Lessons for Federal Reform

PubMed Central

Sommers, Anna S; Abraham, Jean Marie; Spicer, Laura; Mikow, Asher; Spaulding-Bynon, Mari

2011-01-01

Objective To identify factors associated with small group employer participation in New Mexico's State Coverage Insurance (SCI) program. Data Sources Telephone surveys of employers participating in SCI (N=269) and small employers who inquired about SCI (N=148) were fielded September 2008–January 2009. Study Design Descriptive and multivariate analyses investigated differences between employer samples, including employer characteristics, concerns that applied to the business when deciding whether to participate in SCI, prior offerings of insurance to workers, and perceived affordability of the program. Data Collection/Extraction Methods Unweighted employer samples yielded 88 and 75 percent response rates for the participating and inquiring employers, respectively. Principal Findings The administrative issue most commonly selected by inquiring employers as applying to their business was difficulty understanding how eligibility requirements applied to their business and its employees (53.5 percent). Inquiring businesses were significantly more likely to report concern about affording to pay the premiums in the first month (35.6 versus 18.7 percent) and the cost to the business over the long run (46.5 versus 26.6 percent) relative to participating employers. From the model results, businesses with the fewest full-time employees (zero to two) were 19 percentage points less likely to participate relative to businesses with six or more full-time employees. Conclusions Administrative and cost barriers to participation in SCI reported by employers suggest that the tax credit offered to small businesses under new federal provisions, which merely offsets the employer portion of premium, could be more effective if accompanied by additional supports to businesses. PMID:21143477
Rapid generation of OPC-like cells from human pluripotent stem cells for treating spinal cord injury

PubMed Central

Kim, Dae-Sung; Jung, Se Jung; Lee, Jae Souk; Lim, Bo Young; Kim, Hyun Ah; Yoo, Jeong-Eun; Kim, Dong-Wook; Leem, Joong Woo

2017-01-01

Remyelination via the transplantation of oligodendrocyte precursor cells (OPCs) has been considered as a strategy to improve the locomotor deficits caused by traumatic spinal cord injury (SCI). To date, enormous efforts have been made to derive OPCs from human pluripotent stem cells (hPSCs), and significant progress in the transplantation of such cells in SCI animal models has been reported. The current methods generally require a long period of time (>2 months) to obtain transplantable OPCs, which hampers their clinical utility for patients with SCI. Here we demonstrate a rapid and efficient method to differentiate hPSCs into neural progenitors that retain the features of OPCs (referred to as OPC-like cells). We used cell sorting to select A2B5-positive cells from hPSC-derived neural rosettes and cultured the selected cells in the presence of signaling cues, including sonic hedgehog, PDGF and insulin-like growth factor-1. This method robustly generated neural cells positive for platelet-derived growth factor receptor-α (PDGFRα) and NG2 (~90%) after 4 weeks of differentiation. Behavioral tests revealed that the transplantation of the OPC-like cells into the spinal cords of rats with contusive SCI at the thoracic level significantly improved hindlimb locomotor function. Electrophysiological assessment revealed enhanced neural conduction through the injury site. Histological examination showed increased numbers of axon with myelination at the injury site and graft-derived myelin formation with no evidence of tumor formation. Our method provides a cell source from hPSCs that has the potential to recover motor function following SCI. PMID:28751784
Ionization instability induced striations in low frequency and pulsed He/H2O atmospheric pressure plasmas

NASA Astrophysics Data System (ADS)

Kawamura, E.; Lieberman, M. A.; Lichtenberg, A. J.

2018-01-01

In previous work [Kawamura et al., Plasma Sources Sci. Technol. 25, 054009 (2016)] and [Kawamura et al., J. Phys. D: Appl. Phys. 50, 145204 (2017)], 1D kinetic particle-in-cell (PIC) simulations of narrow gap (1 to 4 mm), high frequency (27 MHz) or dc-driven, He/2%H2O atmospheric pressure plasmas (APPs) showed an ionization instability resulting in standing striations (spatial oscillations) in the bulk plasma. We developed a steady-state striation theory which showed that the striations are due to non-local electron kinetics. In both the high frequency and dc-driven cases, the equilibrium electron density n0 in the plasma bulk was stationary. In this work, we first conduct 1D PIC simulations of a 1 mm gap He/2%H2O APP, driven by a sinusoidal current at a low frequency of f = 50 kHz such that ω = 2πf is well below the ionization frequency νiz. In this case, n0 varies with time, and we observe a time-varying instability which quasistatically depends on n0(t). At each phase of the rf cycle, the discharge resembles a dc discharge at the same n0. At higher frequencies (200 kHz-1 MHz), ω approaches νiz, and quasistatic equilibrium at each phase breaks down. The discharge is also driven with a 200 kHz, 50% duty cycle square wave pulse with a short rise and fall time of 0.1 μs in an attempt to directly measure the striation growth rate s during the on-cycle before it saturated. However, the spike in current during the rise time leads to a spike in electron temperature Te and hence νiz and s at the beginning of the rise which saturated during the beginning of the on-cycle. To predict the instability growth rate and saturation during and after the current spike, we extend our striation theory to include time-varying n0, Te, νiz, as well as terms for the nonlinear saturation and noise floor of the striation amplitude. The time-varying global model predictions are compared to the PIC simulations, showing reasonable agreement.
Precision measurements with atom interferometry

NASA Astrophysics Data System (ADS)

Schubert, Christian; Abend, Sven; Schlippert, Dennis; Ertmer, Wolfgang; Rasel, Ernst M.

2017-04-01

Interferometry with matter waves enables precise measurements of rotations, accelerations, and differential accelerations [1-5]. This is exploited for determining fundamental constants [2], in fundamental science as e.g. testing the universality of free fall [3], and is applied for gravimetry [4], and gravity gradiometry [2,5]. At the Institut für Quantenoptik in Hannover, different approaches are pursued. A large scale device is designed and currently being set up to investigate the gain in precision for gravimetry, gradiometry, and fundamental tests on large baselines [6]. For field applications, a compact and transportable device is being developed. Its key feature is an atom chip source providing a collimated high flux of atoms which is expected to mitigate systematic uncertainties [7,8]. The atom chip technology and miniaturization benefits from microgravity experiments in the drop tower in Bremen and sounding rocket experiments [8,9] which act as pathfinders for space borne operation [10]. This contribution will report about our recent results. The presented work is supported by the CRC 1227 DQ-mat, the CRC 1128 geo-Q, the RTG 1729, the QUEST-LFS, and by the German Space Agency (DLR) with funds provided by the Federal Ministry of Economic Affairs and Energy (BMWi) due to an enactment of the German Bundestag under Grant No. DLR 50WM1552-1557. [1] P. Berg et al., Phys. Rev. Lett., 114, 063002, 2015; I. Dutta et al., Phys. Rev. Lett., 116, 183003, 2016. [2] J. B. Fixler et al., Science 315, 74 (2007); G. Rosi et al., Nature 510, 518, 2014. [3] D. Schlippert et al., Phys. Rev. Lett., 112, 203002, 2014. [4] A. Peters et al., Nature 400, 849, 1999; A. Louchet-Chauvet et al., New J. Phys. 13, 065026, 2011; C. Freier et al., J. of Phys.: Conf. Series 723, 012050, 2016. [5] J. M. McGuirk et al., Phys. Rev. A 65, 033608, 2002; P. Asenbaum et al., arXiv:1610.03832. [6] J. Hartwig et al., New J. Phys. 17, 035011, 2015. [7] H. Ahlers et al., Phys. Rev. Lett. 116, 173601, 2016; S. Abend et al., Phys. Rev. Lett. 117, 203003, 2016. [8] J. Rudolph et al., New J. Phys. 17, 065001, 2015. [9] H. Müntinga et al., Phys. Rev. Lett., 110, 093602, 2013. [10] O. Carraz et al., Microgravity Sci. Technol. 26, 139, 2014; D. Aguilera et al., Class. Quantum Grav. 31, 115010, 2014.
Global burden of mortalities due to chronic exposure to ambient PM2.5 from open combustion of domestic waste

NASA Astrophysics Data System (ADS)

Kodros, John K.; Wiedinmyer, Christine; Ford, Bonne; Cucinotta, Rachel; Gan, Ryan; Magzamen, Sheryl; Pierce, Jeffrey R.

2016-12-01

Uncontrolled combustion of domestic waste has been observed in many countries, creating concerns for air quality; however, the health implications have not yet been quantified. We incorporate the Wiedinmyer et al (2014 Environ. Sci. Technol. 48 9523-30) emissions inventory into the global chemical-transport model, GEOS-Chem, and provide a first estimate of premature adult mortalities from chronic exposure to ambient PM2.5 from uncontrolled combustion of domestic waste. Using the concentration-response functions (CRFs) of Burnett et al (2014 Environ. Health Perspect. 122 397-403), we estimate that waste-combustion emissions result in 270 000 (5th-95th: 213 000-328 000) premature adult mortalities per year. The confidence interval results only from uncertainty in the CRFs and assumes equal toxicity of waste-combustion PM2.5 to all other PM2.5 sources. We acknowledge that this result is likely sensitive to choice of chemical-transport model, CRFs, and emission inventories. Our central estimate equates to 9% of adult mortalities from exposure to ambient PM2.5 reported in the Global Burden of Disease Study 2010. Exposure to PM2.5 from waste combustion increases the risk of premature mortality by more than 0.5% for greater than 50% of the population. We consider sensitivity simulations to uncertainty in waste-combustion emission mass, the removal of waste-combustion emissions, and model resolution. A factor-of-2 uncertainty in waste-combustion PM2.5 leads to central estimates ranging from 138 000 to 518 000 mortalities per year for factors-of-2 reductions and increases, respectively. Complete removal of waste combustion would only avoid 191 000 (5th-95th: 151 000-224 000) mortalities per year (smaller than the total contributed premature mortalities due to nonlinear CRFs). Decreasing model resolution from 2° × 2.5° to 4° × 5° results in 16% fewer mortalities attributed to waste-combustion PM2.5, and over Asia, decreasing resolution from 0.5° × 0.666° to 2° × 2.5° results in 21% fewer mortalities attributed to waste-combustion PM2.5. Owing to coarse model resolution, our global estimates of premature mortality from waste-combustion PM2.5 are likely a lower bound.
Investigating Changes in Iron Solubility and Isotopic Composition of Mineral Dust and Industrial Ash during Simulated Atmospheric Processing

NASA Astrophysics Data System (ADS)

Maters, E. C.; Flament, P.; de Jong, J.; Mattielli, N. D. C.; Deboudt, K.

2017-12-01

Iron (Fe) is a key element in ocean biogeochemistry and hence the carbon cycle. Its low concentration in seawater limits primary production in >30% of the surface ocean, and thus strong interest lies in constraining Fe inputs to the ocean on different spatial and temporal scales. During Earth's past, large fluctuations in atmospheric deposition fluxes of continental particles including mineral dust and volcanic ash to the ocean may have played a role in climate change events. At present, anthropogenic particles from metal working, biomass burning, and fossil fuel combustion are increasingly recognised to deliver Fe to the ocean as well. To assess the relative importance of these particulate Fe sources, knowledge of their deposition flux (overall dominated by natural dusts) and their Fe solubility (a proxy for Fe bioavailability, and typically higher in anthropogenic materials) is needed, although large uncertainties remain in these parameters. A potential tool for tracing atmospheric inputs to the ocean is the Fe isotope composition (δ56Fe), previously reported to be distinct for natural versus anthropogenic particles. However, it remains unknown if and how the δ56Fe is influenced by various physicochemical processes (e.g. acidification, photochemistry) shown to enhance Fe solubility in airborne particles. Iron isotopic fractionation has been observed during ligand-controlled and photo-reductive dissolution of goethite at low pH,[1] and similar effects may apply to more complex materials during atmospheric transport. Specifically, isotopic enrichment in partially dissolved particles may result from initial preferential release of 54Fe over 56Fe from the solid surface. To test these hypotheses, we subjected natural and anthropogenic specimens, including mineral dust from the Sahara desert and industrial ash from an Fe-Mn alloy factory, to simulated atmospheric processing in pH 2 solution in the presence/absence of oxalic acid and solar radiation. The Fe solubility and δ56Fe/IRMM-014 values of the solid samples were measured to determine the extents of fractionation relative to unprocessed particles. The results of these experiments and the implications for tracing atmospheric Fe inputs to the ocean will be presented. [1] Wiederhold, J. G. et. al. (2006) Environ. Sci. Technol., 40, 3787-3793.
VizieR Online Data Catalog: A spectral approach to transit timing variations (Ofir+, 2018)

NASA Astrophysics Data System (ADS)

Ofir, A.; Xie, J.-W.; Jiang, C.-F.; Sari, R.; Aharonson, O.

2018-03-01

We used Kepler Data Release 24 as the source data and the Kepler Objects of Interest (KOIs) table downloaded from the NExSci archive on 2015 December 25 as the source of list of candidate signals, and processed 4706 object not dispositioned as "false positive". We remove eclipsing binaries from the candidates list (see section 4.1 for further details). (1 data file).
Scaling to diversity: The DERECHOS distributed infrastructure for analyzing and sharing data

NASA Astrophysics Data System (ADS)

Rilee, M. L.; Kuo, K. S.; Clune, T.; Oloso, A.; Brown, P. G.

2016-12-01

Integrating Earth Science data from diverse sources such as satellite imagery and simulation output can be expensive and time-consuming, limiting scientific inquiry and the quality of our analyses. Reducing these costs will improve innovation and quality in science. The current Earth Science data infrastructure focuses on downloading data based on requests formed from the search and analysis of associated metadata. And while the data products provided by archives may use the best available data sharing technologies, scientist end-users generally do not have such resources (including staff) available to them. Furthermore, only once an end-user has received the data from multiple diverse sources and has integrated them can the actual analysis and synthesis begin. The cost of getting from idea to where synthesis can start dramatically slows progress. In this presentation we discuss a distributed computational and data storage framework that eliminates much of the aforementioned cost. The SciDB distributed array database is central as it is optimized for scientific computing involving very large arrays, performing better than less specialized frameworks like Spark. Adding spatiotemporal functions to the SciDB creates a powerful platform for analyzing and integrating massive, distributed datasets. SciDB allows Big Earth Data analysis to be performed "in place" without the need for expensive downloads and end-user resources. Spatiotemporal indexing technologies such as the hierarchical triangular mesh enable the compute and storage affinity needed to efficiently perform co-located and conditional analyses minimizing data transfers. These technologies automate the integration of diverse data sources using the framework, a critical step beyond current metadata search and analysis. Instead of downloading data into their idiosyncratic local environments, end-users can generate and share data products integrated from diverse multiple sources using a common shared environment, turning distributed active archive centers (DAACs) from warehouses into distributed active analysis centers.
Transforming NAD 27 and NAD 83 positions : making legacy mapping and surveys GPS compatible.

DOT National Transportation Integrated Search

2015-06-01

The Connecticut Department of Transportation (CTDOT) and the University of Connecticut are creating a real-time network (RTN) to make real-time surveying widely available in Connecticut. This RTN uses global navigation satellite system (GNSS) technol...
Volatile organic compound conversion by ozone, hydroxyl radicals, and nitrate radicals in residential indoor air: Magnitudes and impacts of oxidant sources

NASA Astrophysics Data System (ADS)

Waring, Michael S.; Wells, J. Raymond

2015-04-01

Indoor chemistry may be initiated by reactions of ozone (O3), the hydroxyl radical (OH), or the nitrate radical (NO3) with volatile organic compounds (VOC). The principal indoor source of O3 is air exchange, while OH and NO3 formation are considered as primarily from O3 reactions with alkenes and nitrogen dioxide (NO2), respectively. Herein, we used time-averaged models for residences to predict O3, OH, and NO3 concentrations and their impacts on conversion of typical residential VOC profiles, within a Monte Carlo framework that varied inputs probabilistically. We accounted for established oxidant sources, as well as explored the importance of two newly realized indoor sources: (i) the photolysis of nitrous acid (HONO) indoors to generate OH and (ii) the reaction of stabilized Criegee intermediates (SCI) with NO2 to generate NO3. We found total VOC conversion to be dominated by reactions both with O3, which almost solely reacted with D-limonene, and also with OH, which reacted with D-limonene, other terpenes, alcohols, aldehydes, and aromatics. VOC oxidation rates increased with air exchange, outdoor O3, NO2 and D-limonene sources, and indoor photolysis rates; and they decreased with O3 deposition and nitric oxide (NO) sources. Photolysis was a strong OH formation mechanism for high NO, NO2, and HONO settings, but SCI/NO2 reactions weakly generated NO3 except for only a few cases.

Determination of the Threshold of Gravity for the Susceptibility to Kinetosis in Fish - a Centrifuge Experiment in the ZARM Drop-Tower employing gradually reduced Gravity

NASA Astrophysics Data System (ADS)

Anken, R.; Hilbig, R.

In the course of earlier experiments at diminished gravity conditions we have successfully used larval cichlid fish Oreochromis mossambicus as a vertebrate model system in investigating the basic cause of susceptibility to motion sickness kinetosis It was observed that most animals of a given batch reveal kinetoses i e performing looping responses LR or spinning movements SM at high quality microgravity 10-6g ZARM drop-tower whereas comparatively few individuals swim kinetotically at low quality microgravity LQM 0 03-0 05g during parabolic aircraft flights Anken and Hilbig Microgravity Sci Technol 15 52-57 2004 In order to gain further insights into a possible threshold of gravity for inducing motion sickness animals were subjected to drop-tower flights within a centrifuge The levels of gravity applied ranged from 0 009g until 0 3g The lowest level of gravity under which few normally swimming fish were observed ranged around 0 015g Since this is a very low level of gravity the normally swimming fish have to be considered to be either extremely sensitive to any force of gravity in order to use it as a cue for postural control or they use cues other than the residual gravity for maintaining equilibrium Most of the remaining kinetotically swimming animals showed LR whereas few exhibited SM With increasing gravity the ratio of normally swimming and spinning specimens increased accompanied by a decrease in the number of looping larvae Regarding the ratio a shift from LR to SM took place at around 0 02g At 0 3g all animals behaved
A Scheme for the Integrated Assessment of Mitigation Options

NASA Astrophysics Data System (ADS)

Held, H.; Edenhofer, O.

2003-04-01

After some consensus has been achieved that the global mean temperature will have increased by 1.4 to 5.8^oC at the end of this century in case of continued ``business as usual'' greenhouse gas emissions, society has to decide if or which mitigation measures should be taken. A new integrated assessment project on this very issue will be started at PIK in spring 2003. The assessment will cover economic aspects as well as potential side effects of various measures. In the economic module, the effects of investment decisions on technological innovation will be explicitly taken into account. Special emphasize will be put on the issue of uncertainty. Hereby we distinguish the uncertainty related to the Integrated Assessment modules, including the economic module, from the fact that no over-complex system can be fully captured by a model. Therefore, a scheme for the assessment of the ``residual'', the non-modelled part of the system, needs to be worked out. The scheme must be truly interdisciplinary, i.e. must be applicable to at least the natural science and the economic aspects. A scheme based on meta-principles like minimum persistence, ubiquity, or irreversibility of potential measures appears to be a promising candidate. An implementation of ubiquity as at present successfully operated in environmental chemistry may serve as a guideline [1]. Here, the best-known mechanism within a complex impact chain of potentially harmful chemicals, their transport, is captured by a reaction-diffusion mechanism [2]. begin{thebibliography}{0} bibitem{s} M. Scheringer, Persistence and spatial range as endpoints of an exposure-based assessment of organic chemicals. Environ. Sci. Technol. 30: 1652-1659 (1996). bibitem{h} H. Held, Robustness of spatial ranges of environmental chemicals with respect to model dimension, accepted for publication in Stoch. Environ. Res. Risk Assessment.
Fast-ion transport in qmin>2, high- β steady-state scenarios on DIII-D

DOE PAGES

Holcomb, C. T.; Heidbrink, W. W.; Ferron, J. R.; ...

2015-05-22

The results from experiments on DIII-D [J. L. Luxon, Fusion Sci. Technol. 48, 828 (2005)] aimed at developing high β steady-state operating scenarios with high-qminqmin confirm that fast-ion transport is a critical issue for advanced tokamak development using neutral beam injection current drive. In DIII-D, greater than 11 MW of neutral beam heating power is applied with the intent of maximizing β N and the noninductive current drive. However, in scenarios with q min>2 that target the typical range of q 95= 5–7 used in next-step steady-state reactor models, Alfvén eigenmodes cause greater fast-ion transport than classical models predict. Thismore » enhanced transport reduces the absorbed neutral beam heating power and current drive and limits the achievable β N. Conversely similar plasmas except with q min just above 1 have approximately classical fast-ion transport. Experiments that take q min>3 plasmas to higher β P with q 95= 11–12 for testing long pulse operation exhibit regimes of better than expected thermal confinement. Compared to the standard high-q min scenario, the high β P cases have shorter slowing-down time and lower ∇β fast, and this reduces the drive for Alfvénic modes, yielding nearly classical fast-ion transport, high values of normalized confinement, β N, and noninductive current fraction. These results suggest DIII-D might obtain better performance in lower-q 95, high-q min plasmas using broader neutral beam heating profiles and increased direct electron heating power to lower the drive for Alfvén eigenmodes.« less
Detection and kinetics of protein nitration in aerosols by NO2 and O3

NASA Astrophysics Data System (ADS)

Yang, H.; Zhang, Y.; Pöschl, U.

2009-04-01

The effects of air pollution on allergic diseases are not yet well-understood, but recent studies have shown that proteins are efficiently nitrated by polluted air (Franze et al., 2005) and that nitration enhances the allergenic potential of proteins such as the prominent birch pollen allergen Bet v 1 (Gruijthuijsen et al., 2006). Accordingly, the nitration of proteins in bioaerosol particles such as pollen and spores by NO2 and O3 might be a reason why allergies are on the increase in areas with traffic-related air pollution such as mega-cities and city clusters. In this study we have developed a method to determine the nitrotyrosine residue number per molecule in nitrated model proteins (bovine serum albumin, BSA; ovalbumin, OVA) by liquid chromatography coupled to UV-Vis photometry and mass spectrometry detectors (LC-DAD and LC-ESI-MS). Nitration experiments were carried out by exposing proteins to synthetic gas mixtures of nitrogen dioxide, ozone, nitrogen, synthetic air and water vapor. Reaction rates were measured at different concentration levels of NO2 and O3, and rate coefficients for the heterogeneous chemical reaction were determined. The implications for atmospheric aging and chemical transformation of bioaerosol particles and their potential effects on public health will be discussed. References: Franze, T., Weller, M.G., Niessner, R., Pöschl, U., Protein nitration by polluted air, Environ. Sci. Technol. 39, 1673-1678, 2005. Gruijthuijsen, Y.K., Grieshuber, I., Stöcklinger, A., Tischler, U., Fehrenbach, T., Weller, M.G., Vogel, L., Vieths, S., Pöschl, U., Duschl, A., Nitration enhances the allergenic potential of proteins, Int. Arch. Allergy Immunol. 141, 265-275, 2006.
Abundance and antibiotic susceptibility of Vibrio spp. isolated from microplastics

NASA Astrophysics Data System (ADS)

Laverty, A. L.; Darr, K.; Dobbs, F. C.

2016-02-01

In recent years, there has been a growing concern for `microplastics' (particles < 5 mm) in the marine environment. Since plastics degrade very slowly, they remain in the environment on much longer timescales than most natural substrates and can thus provide a novel habitat for colonization by microbial communities (Zettler et al. 2013 Environ. Sci. Technol. 47:7137). The full spectrum of relationships between microplastics and bacteria, however, is little understood. In summer 2015, we examined microplastics collected from a tributary of the lower Chesapeake Bay and determined the presence, abundance, and antibiotic-resistance profiles of Vibrio spp. found on them. We collected 22 microplastic pieces, paired seawater samples, and from them cultured 44 putative Vibrio spp. isolates, 18 of which were PCR-confirmed as V. parahaemolyticus and 3 as V. vulnificus. There were no PCR-confirmed V. cholerae isolates. We used the Kirby-Bauer disk diffusion susceptibility test to examine the isolates' response to six antibiotics: chloramphenicol (30μg), gentamicin (10μg), ampicillin (10μg), streptomycin (10μg), tetracycline (30μg), and rifampin (5μg). Vibrio isolates were susceptible to three or more of the six antibiotics tested and all were susceptible to tetracycline and chloramphenicol. There were no apparent differences between the antibiotic susceptibilities of vibrios isolated from microplastics compared to those from the water column. In every instance tested, vibrios on microplastics were enriched by at least two orders of magnitude compared to those from paired seawater samples. This study demonstrates that microplastic particles serve as a habitat for Vibrio species, in particular V. vulnificus and V. parahaemolyticus, confirming the conjecture of Zettler et al. (2013) that plastics may serve as a vector for these and other potentially pathogenic bacteria.
Dynamics of δ-dopant redistribution during heterostructure growth

NASA Astrophysics Data System (ADS)

Pankratov, E. L.

2007-06-01

It has recently been shown that growth of a multilayer structure with one or more delta-layers at high temperature leads to spreading and asymmetrization of the dopant distribution [see, for example, E.F.J. Schubert, Vac. Sci. Technol. A. 8, 2980 (1990), A.M. Nazmul, S. Sugahara, M. Tanaka, J. Crystal Growth 251, 303 (2003); R.C. Newman, M.J. Ashwin, M.R. Fahy, L. Hart, S.N. Holmes, C. Roberts, X. Zhang, Phys. Rev. B 54, 8769 (1996); E.F. Schubert, J.M. Kuo, R.F. Kopf, H.S. Luftman, L.C. Hopkins, N.J. Sauer, J. Appl. Phys. 67, 1969 (1990); P.M. Zagwijn, J.F. van der Veen, E. Vlieg, A.H. Reader, D.J. Gravesteijn, J. Appl. Phys. 78, 4933 (1995); W.S. Hobson, S.J. Pearton, E.F. Schubert, G. Cabaniss, Appl. Phys. Lett. 55, 1546 (1989); Delta Doping of Semiconductors, edited by E.F. Schubert (Cambridge University Press, Cambridge, 1996); Yu.N. Drozdov, N.B. Baidus', B.N. Zvonkov, M.N. Drozdov, O.I. Khrykin, V.I. Shashkin, Semiconductors 37, 194 (2003); E. Skuras, A.R. Long, B. Vogele, M.C. Holland, C.R. Stanley, E.A. Johnson, M. van der Burgt, H. Yaguchi, J. Singleton, Phys. Rev. B 59, 10712 (1999); G. Li, C. Jagadish, Solid-State Electronics 41, 1207 (1997)]. In this work analytical and numerical analysis of dopant dynamics in a delta-doped area of a multilayer structure has been accomplished using Fick's second law. Some reasons for asymmetrization of a delta-dopant distribution are illustrated. The spreading of a delta-layer has been estimated using example materials of a multilayer structure, a delta-layer and an overlayer.
Multi-channel transport experiments at Alcator C-Mod and comparison with gyrokinetic simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, A. E.; Howard, N. T.; Greenwald, M.

2013-05-15

Multi-channel transport experiments have been conducted in auxiliary heated (Ion Cyclotron Range of Frequencies) L-mode plasmas at Alcator C-Mod [Marmar and Alcator C-Mod Group, Fusion Sci. Technol. 51(3), 3261 (2007)]. These plasmas provide good diagnostic coverage for measurements of kinetic profiles, impurity transport, and turbulence (electron temperature and density fluctuations). In the experiments, a steady sawtoothing L-mode plasma with 1.2 MW of on-axis RF heating is established and density is scanned by 20%. Measured rotation profiles change from peaked to hollow in shape as density is increased, but electron density and impurity profiles remain peaked. Ion or electron heat fluxesmore » from the two plasmas are the same. The experimental results are compared directly to nonlinear gyrokinetic theory using synthetic diagnostics and the code GYRO [Candy and Waltz, J. Comput. Phys. 186, 545 (2003)]. We find good agreement with experimental ion heat flux, impurity particle transport, and trends in the fluctuation level ratio (T(tilde sign){sub e}/T{sub e})/(ñ{sub e}/n{sub e}), but underprediction of electron heat flux. We find that changes in momentum transport (rotation profiles changing from peaked to hollow) do not correlate with changes in particle transport, and also do not correlate with changes in linear mode dominance, e.g., Ion Temperature Gradient versus Trapped Electron Mode. The new C-Mod results suggest that the drives for momentum transport differ from drives for heat and particle transport. The experimental results are inconsistent with present quasilinear models, and the strong sensitivity of core rotation to density remains unexplained.« less
Nanoscale topographic pattern formation on Kr{sup +}-bombarded germanium surfaces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perkinson, Joy C.; Madi, Charbel S.; Aziz, Michael J.

2013-03-15

The nanoscale pattern formation of Ge surfaces uniformly irradiated by Kr{sup +} ions was studied in a low-contamination environment at ion energies of 250 and 500 eV and at angles of 0 Degree-Sign through 80 Degree-Sign . The authors present a phase diagram of domains of pattern formation occurring as these two control parameters are varied. The results are insensitive to ion energy over the range covered by the experiments. Flat surfaces are stable from normal incidence up to an incidence angle of {theta} = 55 Degree-Sign from normal. At higher angles, the surface is linearly unstable to the formationmore » of parallel-mode ripples, in which the wave vector is parallel to the projection of the ion beam on the surface. For {theta} {>=} 75 Degree-Sign the authors observe perpendicular-mode ripples, in which the wave vector is perpendicular to the ion beam. This behavior is qualitatively similar to those of Madi et al. for Ar{sup +}-irradiated Si but is inconsistent with those of Ziberi et al. for Kr{sup +}-irradiated Ge. The existence of a window of stability is qualitatively inconsistent with a theory based on sputter erosion [R. M. Bradley and J. M. Harper, J. Vac. Sci. Technol. A 6, 2390 (1988)] and qualitatively consistent with a model of ion impact-induced mass redistribution [G. Carter and V. Vishnyakov, Phys. Rev. B 54, 17647 (1996)] as well as a crater function theory incorporating both effects [S. A. Norris et al., Nat. Commun. 2, 276 (2011)]. The critical transition angle between stable and rippled surfaces occurs 10 Degree-Sign -15 Degree-Sign above the value of 45 Degree-Sign predicted by the mass redistribution model.« less
Common y-intercept and single compound regressions of gas-particle partitioning data vs 1/T

NASA Astrophysics Data System (ADS)

Pankow, James F.

Confidence intervals are placed around the log Kp vs 1/ T correlation equations obtained using simple linear regressions (SLR) with the gas-particle partitioning data set of Yamasaki et al. [(1982) Env. Sci. Technol.16, 189-194]. The compounds and groups of compounds studied include the polycylic aromatic hydrocarbons phenanthrene + anthracene, me-phenanthrene + me-anthracene, fluoranthene, pyrene, benzo[ a]fluorene + benzo[ b]fluorene, chrysene + benz[ a]anthracene + triphenylene, benzo[ b]fluoranthene + benzo[ k]fluoranthene, and benzo[ a]pyrene + benzo[ e]pyrene (note: me = methyl). For any given compound, at equilibrium, the partition coefficient Kp equals ( F/ TSP)/ A where F is the particulate-matter associated concentration (ng m -3), A is the gas-phase concentration (ng m -3), and TSP is the concentration of particulate matter (μg m -3). At temperatures more than 10°C from the mean sampling temperature of 17°C, the confidence intervals are quite wide. Since theory predicts that similar compounds sorbing on the same particulate matter should possess very similar y-intercepts, the data set was also fitted using a special common y-intercept regression (CYIR). For most of the compounds, the CYIR equations fell inside of the SLR 95% confidence intervals. The CYIR y-intercept value is -18.48, and is reasonably close to the type of value that can be predicted for PAH compounds. The set of CYIR regression equations is probably more reliable than the set of SLR equations. For example, the CYIR-derived desorption enthalpies are much more highly correlated with vaporization enthalpies than are the SLR-derived desorption enthalpies. It is recommended that the CYIR approach be considered whenever analysing temperature-dependent gas-particle partitioning data.
Wave-induced mass transport affects daily Escherichia coli fluctuations in nearshore water.

PubMed

Ge, Zhongfu; Whitman, Richard L; Nevers, Meredith B; Phanikumar, Mantha S

2012-02-21

Characterization of diel variability of fecal indicator bacteria concentration in nearshore waters is of particular importance for development of water sampling standards and protection of public health. Significant nighttime increase in Escherichia coli (E. coli) concentration in beach water, previously observed at marine sites, has also been identified in summer 2000 from fixed locations in waist- and knee-deep waters at Chicago 63rd Street Beach, an embayed, tideless, freshwater beach with low currents at night (approximately 0.015 m s(-1)). A theoretical model using wave-induced mass transport velocity for advection was developed to assess the contribution of surface waves to the observed nighttime E. coli replenishment in the nearshore water. Using average wave conditions for the summer season of year 2000, the model predicted an amount of E. coli transported from water of intermediate depth, where sediment resuspension occurred intermittently, that would be sufficient to have elevated E. coli concentration in the surf and swash zones as observed. The nighttime replenishment of E. coli in the surf and swash zones revealed here is an important phase in the cycle of diel variations of E. coli concentration in nearshore water. According to previous findings in Ge et al. (Environ. Sci. Technol. 2010, 44, 6731-6737), enhanced current circulation in the embayment during the day tends to displace and deposit material offshore, which partially sets up the system by the early evening for a new period of nighttime onshore movement. This wave-induced mass transport effect, although facilitating a significant base supply of material shoreward, can be perturbed or significantly influenced by high currents (orders of magnitude larger than a typical wave-induced mass transport velocity), current-induced turbulence, and tidal forcing.
Two-Dimensional Stable Isotope Fractionation During Aerobic and Anaerobic Alkane Biodegradation and Implications for the Field

NASA Astrophysics Data System (ADS)

El Morris, Brandon; Suflita, Joseph M.; Richnow, Hans-Hermann

2010-05-01

Quantitatively, n-alkanes comprise a major portion of most crude oils. In petroliferous formations, it may be possible to relate the loss of these compounds to the levels of biodegradation occurring in situ [1]. Moreover, it is important to develop indicators of alkane degradation that may be used to monitor bioremediation of hydrocarbon-impacted environments. Desulfoglaeba alkanexedens and Pseudomonas putida GPo1 were used to determine if carbon and hydrogen stable isotope fractionation could differentiate between n-alkane degradation under anaerobic and aerobic conditions, respectively in the context of the Rayleigh equation model [2]. Bacterial cultures were sacrificed by acidification and headspace samples were analyzed for stable isotope composition using gas chromatography-isotope ratio mass spectrometry. Carbon enrichment factors (bulk) for anaerobic and aerobic biodegradation of hexane were -5.52 ± 0.2‰ and -4.34 ± 0.3‰, respectively. Hydrogen enrichment during hexane degradation was -43.14 ± 6.32‰ under sulfate-reducing conditions, and was too low for quantification during aerobiosis. Collectively, this indicates that the correlation between carbon and hydrogen stable isotope fractionation (may be used to help elucidate in situ microbial processes in oil reservoirs, and during intrinsic as well as engineered remediation efforts. References 1. Asif, M.; Grice, K.; Fazeelat, T., Assessment of petroleum biodegradation using stable hydrogen isotopes of individual saturated hydrocarbon and polycyclic aromatic hydrocarbon distributions in oils from the Upper Indus Basin, Pakistan. Organic Geochemistry 2009, 40, (3), 301-311. 2. Fischer, A.; Herklotz, I.; Herrmann, S.; Thullner, M.; Weelink, S. A. B.; Stams, A., J. M.; Schloemann, M.; Richnow, H.-H.; Vogt, C., Combined carbon and hydrogen isotope fractionation investigations for elucidating benzene biodegradation pathways. Environ. Sci. Technol. 2008, 42, 4356-4363.
Enhanced circular photogalvanic effect in HgTe quantum wells in the heavily inverted regime

NASA Astrophysics Data System (ADS)

Li, Jun; Yang, Wen; Liu, Jiang-Tao; Huang, Wei; Li, Cheng; Chen, Song-Yan

2017-01-01

HgTe-based quantum wells (QWs) possess very strong spin-orbit interaction (SOI) and have become an ideal platform for the study of fundamental SOI-dependent phenomena and the topological insulator phase. Circular photogalvanic effect (CPGE) in HgTe QWs is of great interest because it provides an effective optical access to probe the spin-related information of HgTe systems. However, the complex band structure and large spin splitting of HgTe QWs makes it inadequate to analyze the experimental results of CPGE in HgTe QWs [B. Wittmann et al., Semicond. Sci. Technol. 25, 095005 (2010), 10.1088/0268-1242/25/9/095005] with reduced band models. Here, based on the realistic eight-band k .p Hamiltonian and combined with the density-matrix formalism, we present a detailed theoretical investigation of CPGE in (001)-oriented Hg0.3Cd0.7Te /HgTe /Hg0.3Cd0.7Te QWs. We find the CPGE currents in HgTe QWs in the heavily inverted regime are significantly enhanced due to the strong distortion of band dispersion at a certain range of the energy spectrum. This enhancement effect could offer an experimental certificate that the HgTe QW is in the heavily inverted phase (usually accompanied with the emergence of two-dimensional topological edge states), and could also be utilized in engineering the high efficiency ellipticity detector of infrared and terahertz radiation [S. N. Danilov et al., J. Appl. Phys. 105, 013106 (2009), 10.1063/1.3056393]. Additionally, within the same theoretical framework, we also investigate the interplay effect of structure inversion asymmetry and bulk inversion asymmetry and the pure spin currents driven by linearly polarized light in HgTe QWs.
DiAs Web Monitoring: A Real-Time Remote Monitoring System Designed for Artificial Pancreas Outpatient Trials

PubMed Central

Place, Jérôme; Robert, Antoine; Brahim, Najib Ben; Patrick, Keith-Hynes; Farret, Anne; Marie-Josée, Pelletier; Buckingham, Bruce; Breton, Marc; Kovatchev, Boris; Renard, Eric

2013-01-01

Background Developments in an artificial pancreas (AP) for patients with type 1 diabetes have allowed a move toward performing outpatient clinical trials. “Home-like” environment implies specific protocol and system adaptations among which the introduction of remote monitoring is meaningful. We present a novel tool allowing multiple patients to monitor AP use in home-like settings. Methods We investigated existing systems, performed interviews of experienced clinical teams, listed required features, and drew several mockups of the user interface. The resulting application was tested on the bench before it was used in three outpatient studies representing 3480 h of remote monitoring. Results Our tool, called DiAs Web Monitoring (DWM), is a web-based application that ensures reception, storage, and display of data sent by AP systems. Continuous glucose monitoring (CGM) and insulin delivery data are presented in a colored chart to facilitate reading and interpretation. Several subjects can be monitored simultaneously on the same screen, and alerts are triggered to help detect events such as hypoglycemia or CGM failures. In the third trial, DWM received approximately 460 data per subject per hour: 77% for log messages, 5% for CGM data. More than 97% of transmissions were achieved in less than 5 min. Conclusions Transition from a hospital setting to home-like conditions requires specific AP supervision to which remote monitoring systems can contribute valuably. DiAs Web Monitoring worked properly when tested in our outpatient studies. It could facilitate subject monitoring and even accelerate medical and technical assessment of the AP. It should now be adapted for long-term studies with an enhanced notification feature. J Diabetes Sci Technol 2013;7(6):1427–1435 PMID:24351169
Adaptive vector validation in image velocimetry to minimise the influence of outlier clusters

NASA Astrophysics Data System (ADS)

Masullo, Alessandro; Theunissen, Raf

2016-03-01

The universal outlier detection scheme (Westerweel and Scarano in Exp Fluids 39:1096-1100, 2005) and the distance-weighted universal outlier detection scheme for unstructured data (Duncan et al. in Meas Sci Technol 21:057002, 2010) are the most common PIV data validation routines. However, such techniques rely on a spatial comparison of each vector with those in a fixed-size neighbourhood and their performance subsequently suffers in the presence of clusters of outliers. This paper proposes an advancement to render outlier detection more robust while reducing the probability of mistakenly invalidating correct vectors. Velocity fields undergo a preliminary evaluation in terms of local coherency, which parametrises the extent of the neighbourhood with which each vector will be compared subsequently. Such adaptivity is shown to reduce the number of undetected outliers, even when implemented in the afore validation schemes. In addition, the authors present an alternative residual definition considering vector magnitude and angle adopting a modified Gaussian-weighted distance-based averaging median. This procedure is able to adapt the degree of acceptable background fluctuations in velocity to the local displacement magnitude. The traditional, extended and recommended validation methods are numerically assessed on the basis of flow fields from an isolated vortex, a turbulent channel flow and a DNS simulation of forced isotropic turbulence. The resulting validation method is adaptive, requires no user-defined parameters and is demonstrated to yield the best performances in terms of outlier under- and over-detection. Finally, the novel validation routine is applied to the PIV analysis of experimental studies focused on the near wake behind a porous disc and on a supersonic jet, illustrating the potential gains in spatial resolution and accuracy.
Application of the Fokker-Planck molecular mixing model to turbulent scalar mixing using moment methods

NASA Astrophysics Data System (ADS)

Madadi-Kandjani, E.; Fox, R. O.; Passalacqua, A.

2017-06-01

An extended quadrature method of moments using the β kernel density function (β -EQMOM) is used to approximate solutions to the evolution equation for univariate and bivariate composition probability distribution functions (PDFs) of a passive scalar for binary and ternary mixing. The key element of interest is the molecular mixing term, which is described using the Fokker-Planck (FP) molecular mixing model. The direct numerical simulations (DNSs) of Eswaran and Pope ["Direct numerical simulations of the turbulent mixing of a passive scalar," Phys. Fluids 31, 506 (1988)] and the amplitude mapping closure (AMC) of Pope ["Mapping closures for turbulent mixing and reaction," Theor. Comput. Fluid Dyn. 2, 255 (1991)] are taken as reference solutions to establish the accuracy of the FP model in the case of binary mixing. The DNSs of Juneja and Pope ["A DNS study of turbulent mixing of two passive scalars," Phys. Fluids 8, 2161 (1996)] are used to validate the results obtained for ternary mixing. Simulations are performed with both the conditional scalar dissipation rate (CSDR) proposed by Fox [Computational Methods for Turbulent Reacting Flows (Cambridge University Press, 2003)] and the CSDR from AMC, with the scalar dissipation rate provided as input and obtained from the DNS. Using scalar moments up to fourth order, the ability of the FP model to capture the evolution of the shape of the PDF, important in turbulent mixing problems, is demonstrated. Compared to the widely used assumed β -PDF model [S. S. Girimaji, "Assumed β-pdf model for turbulent mixing: Validation and extension to multiple scalar mixing," Combust. Sci. Technol. 78, 177 (1991)], the β -EQMOM solution to the FP model more accurately describes the initial mixing process with a relatively small increase in computational cost.
Wave-induced mass transport affects daily Escherichia coli fluctuations in nearshore water

USGS Publications Warehouse

Ge, Zhongfu; Whitman, Richard L.; Nevers, Meredith B.; Phanikumar, Mantha S.

2012-01-01

Characterization of diel variability of fecal indicator bacteria concentration in nearshore waters is of particular importance for development of water sampling standards and protection of public health. Significant nighttime increase in Escherichia coli (E. coli) concentration in beach water, previously observed at marine sites, has also been identified in summer 2000 from fixed locations in waist- and knee-deep waters at Chicago 63rd Street Beach, an embayed, tideless, freshwater beach with low currents at night (approximately 0.015 m s–1). A theoretical model using wave-induced mass transport velocity for advection was developed to assess the contribution of surface waves to the observed nighttime E. coli replenishment in the nearshore water. Using average wave conditions for the summer season of year 2000, the model predicted an amount of E. coli transported from water of intermediate depth, where sediment resuspension occurred intermittently, that would be sufficient to have elevated E. coli concentration in the surf and swash zones as observed. The nighttime replenishment of E. coli in the surf and swash zones revealed here is an important phase in the cycle of diel variations of E. coli concentration in nearshore water. According to previous findings in Ge et al. (Environ. Sci. Technol. 2010, 44, 6731–6737), enhanced current circulation in the embayment during the day tends to displace and deposit material offshore, which partially sets up the system by the early evening for a new period of nighttime onshore movement. This wave-induced mass transport effect, although facilitating a significant base supply of material shoreward, can be perturbed or significantly influenced by high currents (orders of magnitude larger than a typical wave-induced mass transport velocity), current-induced turbulence, and tidal forcing.
Hazard assessment of exhaust emissions - The next generation of fast and reliable tools for in vitro screening

NASA Astrophysics Data System (ADS)

Rothen-Rutishauser, B.

2017-12-01

Hazard assessment of exhaust emissions - The next generation of fast and reliable tools for in vitro screening Barbara Rothen-Rutishauser Adolphe Merkle Institute, University of Fribourg, Switzerland; barbara.rothen@unifr.ch Pollution by vehicles is a major problem for the environment due to the various components in the exhaust gasses that are emitted into the atmosphere. A large number of epidemiological studies demonstrate the profound impact of vehicle emissions upon human health [1-3]. Such studies however, are unable to attribute a given subset of emissions to a certain adverse effect, which renders decision making difficult. Standardized protocols for exhaust toxicity assessment are lacking and it relies in many aspects on epidemiological and in vivo studies (animals), which are very time and cost-intensive and suffer from considerable ethical issues. An overview about the current state of research and clinical aspects in the field, as well as about the development of sophisticated in vitro approaches mimicking the inhalation of airborne particles / exhaust for the toxicological testing of engine emissions will be provided. Data will be presented that show that the combination of an air-liquid exposure system and 3D lung-cell culture model offers an adequate tool for fast and reliable investigations of complete exhaust toxicity as well as the effects of particulate fraction [4,5]. This approach yields important results for novel and improved emission technologies in the early stages of product development. [1] Donaldson et al. Part Fibre Toxicol 2005, 2: 10. [2] Ghio et al. J Toxicol Environ Health B Crit Rev 2012, 15: 1-21. [3] Peters et al. Res Rep Health Eff Inst 2009, 5-77. [4] Bisig et al. Emiss Control Sci Technol 2015, 1: 237-246. [5] Steiner et al. Atmos Environ 2013, 81: 380-388.
Diclofenac degradation by heterogeneous photocatalysis with Fe3O4/Ti x O y /activated carbon fiber composite synthesized by ultrasound irradiation

NASA Astrophysics Data System (ADS)

Moreno-Valencia, E. I.; Paredes-Carrera, S. P.; Sánchez-Ochoa, J. C.; Flores-Valle, S. O.; Avendaño-Gómez, J. R.

2017-11-01

In this work, a photocatalytic system to degrade diclofenac was developed using a composite Fe3O4/Ti x O y on an activated carbon fiber. Diclofenac is widely used as an anti-inflammatory compound worldwide and it is constantly being added as waste in the environment (Heberer 2002 J. Hydrol. 266 175-89), exceeding the permissible maximum concentration in the wastewater (GEO-3 2002 Programa de las Naciones Unidas para el Medio Ambiente; Golet et al 2003 Environ. Sci. Technol. 37 3243-9 Oviedo et al 2010 Environ. Toxicol. Pharmacol. 29 9-43 Le-Minh et al 2010 Water Res. 44 4295-323 Legrini et al 1993 Chem. Rev. 1093 671-98). The composite was synthesized by sol-gel technique with and without ultrasound irradiation (Singh and Nakate 2014 J. Nanopart. 2014 326747). The solids were deposited by ultrasound irradiation on active carbon fiber in order to optimize the diclofenac degradation. The solids were characterized by x-ray diffraction (XRD), nitrogen physisorption (BET), and scanning electron microscopy with EDS microanalysis (SEM-EDS). The crystal size was calculated with the Debye-Scherrer equation, and the band gap values by the diffuse reflectance method. The evaluation process was studied by UV-vis spectroscopy (Rizzoa et al 2009 Water Res. 43 979-88). It was found that in this synthesis method (ultrasound), textural properties such as porosity, specific surface area and morphology depend on the ultrasound irradiation. The proposed system, Fe3O4/titanium oxide hydrate showed better degradation profile than TiO2 anatase phase; the increase of diclofenac degradation was attributed to the textural properties of the composite, it avoids the filtering process since the separation can be achieved by magnetizing and/or decantation.
Fast-ion transport in q{sub min}>2, high-β steady-state scenarios on DIII-D

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holcomb, C. T.; Heidbrink, W. W.; Collins, C.

2015-05-15

Results from experiments on DIII-D [J. L. Luxon, Fusion Sci. Technol. 48, 828 (2005)] aimed at developing high β steady-state operating scenarios with high-q{sub min} confirm that fast-ion transport is a critical issue for advanced tokamak development using neutral beam injection current drive. In DIII-D, greater than 11 MW of neutral beam heating power is applied with the intent of maximizing β{sub N} and the noninductive current drive. However, in scenarios with q{sub min}>2 that target the typical range of q{sub 95}= 5–7 used in next-step steady-state reactor models, Alfvén eigenmodes cause greater fast-ion transport than classical models predict. Thismore » enhanced transport reduces the absorbed neutral beam heating power and current drive and limits the achievable β{sub N}. In contrast, similar plasmas except with q{sub min} just above 1 have approximately classical fast-ion transport. Experiments that take q{sub min}>3 plasmas to higher β{sub P} with q{sub 95}= 11–12 for testing long pulse operation exhibit regimes of better than expected thermal confinement. Compared to the standard high-q{sub min} scenario, the high β{sub P} cases have shorter slowing-down time and lower ∇β{sub fast}, and this reduces the drive for Alfvénic modes, yielding nearly classical fast-ion transport, high values of normalized confinement, β{sub N}, and noninductive current fraction. These results suggest DIII-D might obtain better performance in lower-q{sub 95}, high-q{sub min} plasmas using broader neutral beam heating profiles and increased direct electron heating power to lower the drive for Alfvén eigenmodes.« less
SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Fourth Results Report

DOT National Transportation Integrated Search

2013-01-01

SunLine Transit Agency provides public transit services to the Coachella Valley area of California. SunLine has demonstrated hydrogen and fuel cell bus technologies for more than 10 years. In May 2010, SunLine began demonstrating the advanced technol...

Los Angeles congestion reduction demonstration (Metro ExpressLanes) program. National evaluation : surveys, interviews, and workshops test plan.

DOT National Transportation Integrated Search

1997-09-01

Integration of intelligent transportation systems (ITS) within a metropolitan area is crucial for effective deployment. The Early Deployment Planning (EDP) Process is one tool that allows transportation officials to plan for and implement ITS technol...
University Research Initiative Program for Combat Readiness

DTIC Science & Technology

1999-05-01

found in sponge-associated bacteria Micrococcus luteus (Bultel-Ponce et al., 1998). Such compounds have antimicrobial activity. Water contact angles...Guyot, M. 1998. Metabolites from the sponge-associated bacterium Micrococcus luteus. J. Mar. Biotechnol. 6:233-236. 3. Incze, B.I., Sea Technol. 1996, 37
Role of Computers in Sci-Tech Libraries.

ERIC Educational Resources Information Center

Bichteler, Julie; And Others

1986-01-01

Articles in this theme issue discuss applications of microcomputers in science/technology libraries, a UNIX-based online catalog, online versus print sources, computer-based statistics, and the applicability and implications of the Matheson-Cooper Report on health science centers for science/technology libraries. A bibliography of new reference…
Ricardo Oliveira | NREL

Science.gov Websites

the System Modeling & Geospatial Data Science Group in the Strategic Energy Analysis Center. Areas Publications Oliveira, R and Moreno, R. 2016. Harvesting, Integrating and Distributing Large Open Geospatial Datasets Using Free and Open-Source Software. Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XLI-B7
Passive hind-limb cycling improves cardiac function and reduces cardiovascular disease risk in experimental spinal cord injury.

PubMed

West, Christopher R; Crawford, Mark A; Poormasjedi-Meibod, Malihe-Sadat; Currie, Katharine D; Fallavollita, Andre; Yuen, Violet; McNeill, John H; Krassioukov, Andrei V

2014-04-15

Spinal cord injury (SCI) causes altered autonomic control and severe physical deconditioning that converge to drive maladaptive cardiac remodelling. We used a clinically relevant experimental model to investigate the cardio-metabolic responses to SCI and to establish whether passive hind-limb cycling elicits a cardio-protective effect. Initially, 21 male Wistar rats were evenly assigned to three groups: uninjured control (CON), T3 complete SCI (SCI) or T3 complete SCI plus passive hind-limb cycling (SCI-EX; 2 × 30 min day(-1), 5 days week(-1) for 4 weeks beginning 6 days post-SCI). On day 32, cardio-metabolic function was assessed using in vivo echocardiography, ex vivo working heart assessments, cardiac histology/molecular biology and blood lipid profiles. Twelve additional rats (n = 6 SCI and n = 6 SCI-EX) underwent in vivo echocardiography and basal haemodynamic assessments pre-SCI and at days 7, 14 and 32 post-SCI to track temporal cardiovascular changes. Compared with CON, SCI exhibited a rapid and sustained reduction in left ventricular dimensions and function that ultimately manifested as reduced contractility, increased myocardial collagen deposition and an up-regulation of transforming growth factor beta-1 (TGFβ1) and mothers against decapentaplegic homolog 3 (Smad3) mRNA. For SCI-EX, the initial reduction in left ventricular dimensions and function at day 7 post-SCI was completely reversed by day 32 post-SCI, and there were no differences in myocardial contractility between SCI-EX and CON. Collagen deposition was similar between SCI-EX and CON. TGFβ1 and Smad3 were down-regulated in SCI-EX. Blood lipid profiles were improved in SCI-EX versus SCI. We provide compelling novel evidence that passive hind-limb cycling prevents cardiac dysfunction and reduces cardiovascular disease risk in experimental SCI.
Framework for Analytic Cognition (FAC): A Guide for Doing All-Source Intelligence Analysis

DTIC Science & Technology

2011-12-01

humans as rational decision makers has been thoroughly discounted in the last decade. Recent research in neuroscience and cognitive psychology has...Intelligence and Counterintelligence, Vol. 18, No. 2, 2005, p. 206. 60 Moore, D.T. & Krizan, L. "Intelligence Analysis: Does NSA have what it Takes...SIGINT NSA Online TS/SCI Online Digital Yes COMINT Internet None N/A Unclassified Online Digital Yes Open Source STRATFOR Local information
A novel command signal for motor neuroprosthetic control.

PubMed

Moss, Christa W; Kilgore, Kevin L; Peckham, P Hunter

2011-01-01

Neuroprostheses can restore functions such as hand grasp or standing to individuals with spinal cord injury (SCI) using electrical stimulation to elicit movements in paralyzed muscles. Implanted neuroprostheses currently use electromyographic (EMG) activity from muscles above the lesion that remain under volitional control as a command input. Systems in development use a networked approach and will allow for restoration of multiple functions but will require additional command signals to control the system, especially in individuals with high-level tetraplegia. The objective of this study was to investigate the feasibility of using muscles innervated below the injury level as command sources for a neuroprosthesis. Recent anatomical and physiological studies have demonstrated the presence of intact axons across the lesion, even in those diagnosed with a clinically complete SCI; hence, EMG activity may be present in muscles with no sign of movement. Twelve participants with motor complete SCI were enrolled and EMG was recorded with surface electrodes from 8 muscles below the knee in each leg. Significant activity was evident in 89% of the 192 muscles studied during attempted movements of the foot and lower limb. At least 2 muscles from each participant were identified as potential command signals for a neuroprosthesis based on 2-state, threshold classification. Results suggest that voluntary activity is present and recordable in below lesion muscles even after clinically complete SCI.
Open and scalable analytics of large Earth observation datasets: From scenes to multidimensional arrays using SciDB and GDAL

NASA Astrophysics Data System (ADS)

Appel, Marius; Lahn, Florian; Buytaert, Wouter; Pebesma, Edzer

2018-04-01

Earth observation (EO) datasets are commonly provided as collection of scenes, where individual scenes represent a temporal snapshot and cover a particular region on the Earth's surface. Using these data in complex spatiotemporal modeling becomes difficult as soon as data volumes exceed a certain capacity or analyses include many scenes, which may spatially overlap and may have been recorded at different dates. In order to facilitate analytics on large EO datasets, we combine and extend the geospatial data abstraction library (GDAL) and the array-based data management and analytics system SciDB. We present an approach to automatically convert collections of scenes to multidimensional arrays and use SciDB to scale computationally intensive analytics. We evaluate the approach in three study cases on national scale land use change monitoring with Landsat imagery, global empirical orthogonal function analysis of daily precipitation, and combining historical climate model projections with satellite-based observations. Results indicate that the approach can be used to represent various EO datasets and that analyses in SciDB scale well with available computational resources. To simplify analyses of higher-dimensional datasets as from climate model output, however, a generalization of the GDAL data model might be needed. All parts of this work have been implemented as open-source software and we discuss how this may facilitate open and reproducible EO analyses.
Literature searching for clinical and cost-effectiveness studies used in health technology assessment reports carried out for the National Institute for Clinical Excellence appraisal system.

PubMed

Royle, P; Waugh, N

2003-01-01

To contribute to making searching for Technology Assessment Reports (TARs) more cost-effective by suggesting an optimum literature retrieval strategy. A sample of 20 recent TARs. All sources used to search for clinical and cost-effectiveness studies were recorded. In addition, all studies that were included in the clinical and cost-effectiveness sections of the TARs were identified, and their characteristics recorded, including author, journal, year, study design, study size and quality score. Each was also classified by publication type, and then checked to see whether it was indexed in the following databases: MEDLINE, EMBASE, and then either the Cochrane Controlled Trials Register (CCTR) for clinical effectiveness studies or the NHS Economic Evaluation Database (NHS EED) for the cost-effectiveness studies. Any study not found in at least one of these databases was checked to see whether it was indexed in the Science Citation Index (SCI) and BIOSIS, and the American Society of Clinical Oncology (ASCO) Online if a cancer review. Any studies still not found were checked to see whether they were in a number of additional databases. The median number of sources searched per TAR was 20, and the range was from 13 to 33 sources. Six sources (CCTR, DARE, EMBASE, MEDLINE, NHS EED and sponsor/industry submissions to National Institute for Clinical Excellence) were used in all reviews. After searching the MEDLINE, EMBASE and NHS EED databases, 87.3% of the clinical effectiveness studies and 94.8% of the cost-effectiveness studies were found, rising to 98.2% when SCI, BIOSIS and ASCO Online and 97.9% when SCI and ASCO Online, respectively, were added. The median number of sources searched for the 14 TARs that included an economic model was 9.0 per TAR. A sensitive search filter for identifying non-randomised controlled trials (RCT), constructed for MEDLINE and using the search terms from the bibliographic records in the included studies, retrieved only 85% of the known sample. Therefore, it is recommended that when searching for non-RCT studies a search is done for the intervention alone, and records are then scanned manually for those that look relevant. Searching additional databases beyond the Cochrane Library (which includes CCTR, NHS EED and the HTA database), MEDLINE, EMBASE and SCI, plus BIOSIS limited to meeting abstracts only, was seldom found to be effective in retrieving additional studies for inclusion in the clinical and cost-effectiveness sections of TARs (apart from reviews of cancer therapies, where a search of the ASCO database is recommended). A more selective approach to database searching would suffice in most cases and would save resources, thereby making the TAR process more efficient. However, searching non-database sources (including submissions from manufacturers, recent meeting abstracts, contact with experts and checking reference lists) does appear to be a productive way of identifying further studies.
Real-time drilling mud gas monitoring for qualitative evaluation of hydrocarbon gas composition during deep sea drilling in the Nankai Trough Kumano Basin.

PubMed

Hammerschmidt, Sebastian B; Wiersberg, Thomas; Heuer, Verena B; Wendt, Jenny; Erzinger, Jörg; Kopf, Achim

2014-01-01

Integrated Ocean Drilling Program Expedition 338 was the second scientific expedition with D/V Chikyu during which riser drilling was conducted as part of the Nankai Trough Seismogenic Zone Experiment. Riser drilling enabled sampling and real-time monitoring of drilling mud gas with an onboard scientific drilling mud gas monitoring system ("SciGas"). A second, independent system was provided by Geoservices, a commercial mud logging service. Both systems allowed the determination of (non-) hydrocarbon gas, while the SciGas system also monitored the methane carbon isotope ratio (δ(13)CCH4). The hydrocarbon gas composition was predominated by methane (> 1%), while ethane and propane were up to two orders of magnitude lower. δ(13)CCH4 values suggested an onset of thermogenic gas not earlier than 1600 meter below seafloor. This study aims on evaluating the onboard data and subsequent geological interpretations by conducting shorebased analyses of drilling mud gas samples. During shipboard monitoring of drilling mud gas the SciGas and Geoservices systems recorded up to 8.64% and 16.4% methane, respectively. Ethane and propane concentrations reached up to 0.03 and 0.013%, respectively, in the SciGas system, but 0.09% and 0.23% in the Geoservices data. Shorebased analyses of discrete samples by gas chromatography showed a gas composition with ~0.01 to 1.04% methane, 2 - 18 ppmv ethane, and 2 - 4 ppmv propane. Quadruple mass spectrometry yielded similar results for methane (0.04 to 4.98%). With δD values between -171‰ and -164‰, the stable hydrogen isotopic composition of methane showed little downhole variability. Although the two independent mud gas monitoring systems and shorebased analysis of discrete gas sample yielded different absolute concentrations they all agree well with respect to downhole variations of hydrocarbon gases. The data point to predominantly biogenic methane sources but suggest some contribution from thermogenic sources at depth, probably due to mixing. In situ thermogenic gas production at depths shallower 2000 mbsf is unlikely based on in situ temperature estimations between 81°C and 85°C and a cumulative time-temperature index of 0.23. In conclusion, the onboard SciGas data acquisition helps to provide a preliminary, qualitative evaluation of the gas composition, the in situ temperature and the possibility of gas migration.
Activation and Regulation of NLRP3 Inflammasome by Intrathecal Application of SDF-1a in a Spinal Cord Injury Model.

PubMed

Zendedel, Adib; Johann, Sonja; Mehrabi, Soraya; Joghataei, Mohammad-Taghi; Hassanzadeh, Gholamreza; Kipp, Markus; Beyer, Cordian

2016-07-01

Stromal cell-derived factor-1 alpha (SDF-1a) or CXCL12 is an important cytokine with multiple functions in the brain during development and in adulthood. The inflammatory response initiated by spinal cord injury (SCI) involves the processing of interleukin-1beta (IL-1ß) and IL-18 mediated by caspase-1 which is under the control of an intracellular multiprotein complex termed inflammasome. Using an SCI rat model, we found improved functional long-term recovery which is paralleled by a reduction of apoptosis after intrathecal treatment with SDF-1a. An intriguing aspect is that SDF-1a changed the number of neuroinflammatory cells in the damaged area. We further examined the cellular localization and sequential expression of several inflammasomes during SCI at 6 h, 24 h, 3 days, and 7 days as well as the role of SDF-1a as a regulatory factor for inflammasomes. Using 14-week old male Wistar rats, spinal cord contusion was applied at the thoracic segment 9, and animals were subsequently treated with SDF-1a via intrathecal application through an osmotic pump. SCI temporally increased the expression of the inflammasomes NLRP3, ASC, the inflammatory marker tumor necrosis factor-a (TNF-a), interleukin-1ß (IL-1β) and IL-18. SDF-1a significantly reduced the levels of IL-18, IL-1b, TNF-a, NLRP3, ASC, and caspase-1. Immunofluorescence double-labeling demonstrated that microglia and neurons are major sources of the ASC and NLRP3 respectivley. Our data provide clear evidence that SCI stimulates a complex scenario of inflammasome activation at the injured site and that SDF-1a-mediated neuroprotection presumably depends on the attenuation of the inflammasome complex.
Longitudinal study of social participation and well-being among persons with spinal cord injury and their partners (pro-WELL)

PubMed Central

Fekete, Christine; Brinkhof, Martin W G; Tough, Hannah; Siegrist, Johannes

2017-01-01

Purpose Social participation is an important determinant of well-being. Among persons with disabilities, and with spinal cord injury (SCI) in particular, opportunities for social participation are restricted and may impact well-being. The longitudinal pro-WELL study aims to investigate associations of 2 major domains of social participation with well-being: (1) availability and quality of close social relationships and (2) acting in core social roles (eg, paid work). The joint inclusion of persons with SCI and their partners is a major innovative aspect of this study enabling an in-depth analysis of interpersonal dynamics in coping with disability. Participants Pro-WELL is a nested project of the Swiss Spinal Cord Injury Cohort Study (SwiSCI) and involves community-dwelling persons aged 30–65 with SCI and their partners living in Switzerland. Baseline data were collected from mid-2015 to early 2016 by telephone interviews and questionnaires. The first and second follow-up assessments are scheduled with a 6 months interval. Findings to date The baseline sample consists of 133 persons with SCI and their partners. We provide an overview of baseline characteristics and well-being and describe recruitment outcomes and participation rates. A comprehensive non-response analysis demonstrates adequate representation of the source population with negligible selection bias regarding sociodemographic and lesion characteristics. Future plans The prospective data collection and analysis of month 6 and 12 assessments are ongoing and tests of the main research hypotheses will be performed. Findings will be disseminated through peer-reviewed journals and scientific conferences. A workshop and a newsletter on study findings are proposed to feed back findings to participants and other stakeholders. PMID:28122827
A survey of protective cushion usage in individuals with spinal cord injury while traveling in a motor vehicle and on a commercial airliner.

PubMed

McClure, Isa A; Nieves, Jeremiah D; Kirshblum, Steven C

2014-11-01

While there are specific recommendations for pressure relieving cushions when seated in a wheelchair, there is a paucity of information regarding prescribed wheelchair cushions for persons with spinal cord injury (SCI) when traveling and not in their wheelchair seat. A questionnaire was designed to ascertain if individuals with SCI who are primarily wheelchair users utilize a prescribed wheelchair cushion when traveling in a motor vehicle (MV) or on a commercial airliner, as not utilizing one may be a causative factor in developing pressure ulcers. Survey design in an outpatient SCI rehabilitation setting. Full-time wheelchair users, with chronic (>1 year) SCI. Forty-two participants completed the survey, with a mean age of 39 years old and time post-injury of 10.4 years. All subjects used a prescribed wheelchair cushion when seated in their wheelchair. Twenty-seven subjects reported transferring to a MV seat (59.5% of sample), with 25 (92.6%) reporting not using a prescribed wheelchair cushion when sitting directly on the MV seat. For subjects who traveled on an airplane (n = 23-54.8%), 19 (82.6%) reported that they do not sit on a prescribed specialty cushion. Persons with chronic SCI, who are primary wheelchair users, utilize prescribed wheelchair cushions when sitting in their wheelchair, but most do not utilize a prescribed wheelchair cushion when seated in a MV (if they transfer out of their chair) or on a airplane seat. Studies to determine the pressures over the bony prominences on their travel surfaces may need to be undertaken to see whether the pressures are appropriate, as they may be a source of skin breakdown.
Does spirituality facilitate adjustment and resilience among individuals and families after SCI?

PubMed

Jones, Kate; Simpson, Grahame Kenneth; Briggs, Lynne; Dorsett, Pat

2016-01-01

The purpose of this scoping review was to investigate the role of spirituality in facilitating adjustment and resilience after spinal cord injury (SCI) for the individual with SCI and their family members. METHOD-DATA SOURCES: Peer reviewed journals were identified using PsychInfo, MEDLINE, CINAHL, Embase and Sociological Abstracts search engines. After duplicates were removed, 434 abstracts were screened applying inclusion and exclusion criteria. The selected 28 studies were reviewed in detail and grouped according to methodological approach. Of the 28 studies relating to spirituality and related meaning-making constructs, 26 addressed the adjustment of the individual with SCI alone. Only two included family members as participants. Quantitative studies demonstrated that spirituality was positively associated with life satisfaction, quality of life, mental health and resilience. The utilisation of meaning-making and hope as coping strategies in the process of adjustment were highlighted within the qualitative studies. Clinical implications included recommendations that spirituality and meaning-making be incorporated in assessment and interventions during rehabilitation. The use of narratives and peer support was also suggested. Spirituality is an important factor in adjustment after SCI. Further research into the relationship between spirituality, family adjustment and resilience is needed. Higher levels of spirituality were associated with improved quality of life, life satisfaction, mental health, and resilience for individuals affected by spinal cord injury. Health professionals can enhance the role that spirituality plays in spinal rehabilitation by incorporating the spiritual beliefs of individuals and their family members into assessment and intervention. By drawing upon meaning-making tools, such as narrative therapy, incorporating peer support, and assisting clients who report a decline in spirituality, health professionals can provide additional support to individuals and their family members as they adjust to changes after spinal cord injury.
Evidence for an intense solar outburst in prehistory

NASA Astrophysics Data System (ADS)

Peratt, A. L.; Yao, W. F.

2008-10-01

A past intense solar outburst and its effect on Earth was proposed by Gold (1962 Pontificiae Acad. Sci. Scr. Varia 25 159) who, along with others, based his hypotheses on strong astronomical and geophysical evidence. The discovery that objects from the Neolithic or Early Bronze Age carry patterns associated with high-current Z-pinches, as would result from an intense plasma impinging Earth, provides a possible insight into the origin and meaning of these ancient symbols produced by humans. Peratt (2003 Trans. Plasma Sci. 31 1192) dealt with the comparison of graphical and radiation data from high-current Z-pinches to petroglyphs, geoglyphs and megaliths. Peratt (2007 Trans. Plasma Sci. 35 778) focused primarily, but not exclusively, on petroglyphs of some 84 different morphologies; pictures found in laboratory experiments and carved on rock. These corresponded to mankind's visual observations of ancient aurora as might be produced if the solar wind had increased at times between one and two orders of magnitude, millennia ago (Gold 1962 Pontificiae Acad. Sci. Scr. Varia 25 159). In Peratt (2007 Trans. Plasma Sci. 35 778), the data were given on the source of light and its temporal change from a current-increasing Z-pinch or dense plasma focus aurora. Orientation and field-of-view data are given as surveyed and contributed from 139 countries, from sites and fields containing several millions of these objects, the latest data coming from a 300 km survey along the Orinoco river basin in Venezuela. In this paper, we include additional petroglyph figures derivable from experiment and computer. This information allows a reconstruction of the auroral form presumably associated with extreme geomagnetic storms and shows, based on existent geophysical evidence, relativistic electron flow inward at Earth's south polar axis and hypervelocity proton impacts around the north polar axis.
Development of theory-based knowledge translation interventions to facilitate the implementation of evidence-based guidelines on the early management of adults with traumatic spinal cord injury.

PubMed

Bérubé, Mélanie; Albert, Martin; Chauny, Jean-Marc; Contandriopoulos, Damien; DuSablon, Anne; Lacroix, Sébastien; Gagné, Annick; Laflamme, Élise; Boutin, Nathalie; Delisle, Stéphane; Pauzé, Anne-Marie; MacThiong, Jean-Marc

2015-12-01

Optimal, early management following a spinal cord injury (SCI) can limit individuals' disabilities and costs related to their care. Several knowledge syntheses were recently published to guide health care professionals with regard to early interventions in SCI patients. However, no knowledge translation (KT) intervention, selected according to a behaviour change theory, has been proposed to facilitate the use of SCI guidelines in an acute care setting. To develop theory-informed KT interventions to promote the application of evidence-based recommendations on the acute care management of SCI patients. The first four phases of the knowledge-to-action model were used to establish the study design. Knowledge selection was based on the Grading of Recommendations Assessment, Development and Evaluation system. Knowledge adaptation to the local context was sourced from the ADAPTE process. The theoretical domains framework oriented the selection and development of the interventions based on an assessment of barriers and enablers to knowledge application. Twenty-nine recommendations were chosen and operationalized in measurable clinical indicators. Barriers related to knowledge, skills, perceived capacities, beliefs about consequences, social influences, and the environmental context and resources theoretical domains were identified. The mapping of behaviour change techniques associated with those barriers led to the development of an online educational curriculum, interdisciplinary clinical pathways as well as policies and procedures. This research project allowed us developing KT interventions according to a thorough behavioural change methodology. Exposure to the generated interventions will support health care professionals in providing the best care to SCI patients. © 2015 John Wiley & Sons, Ltd.
Plasma iron levels appraised 15 days after spinal cord injury in a limb movement animal model.

PubMed

Reis, F M; Esteves, A M; Tufik, S; de Mello, M T

2011-03-01

Experimental, controlled trial. The purpose of this study was to evaluate plasma iron and transferrin levels in a limb movement animal model with spinal cord injury (SCI). Universidade Federal de São Paulo, Departamento de Psicobiologia. In all, 72 male Wistar rats aged 90 days were divided into four groups: (1) acute SCI (1 day, SCI1), (2) 3 days post-SCI (SCI3), (3) 7 days post-SCI (SCI7) and (4) 15 days post-SCI (SCI15). Each of these groups had corresponding control (CTRL) and SHAM groups. Plasma iron and transferrin levels of the different groups were analyzed using a one-way analysis of variance (ANOVA) followed by Tukey's test. We found a significant reduction in iron plasma levels after SCI compared with the CTRL group: SCI1 (CTRL: 175±10.58 μg dl(-1); SCI: 108.28±11.7 μg dl(-1)), SCI3 (CTRL: 195.5±11.00 μg dl(-1); SCI: 127.88±12.63 μg dl(-1)), SCI7 (CTRL: 186±2.97 μg dl(-1); SCI: 89.2±15.39 μg dl(-1)) and SCI15 (CTRL: 163±5.48 μg dl(-1); SCI: 124.44±10.30 μg dl(-1)) (P<0.05; ANOVA). The SHAM1 group demonstrated a reduction in iron plasma after acute SCI (CTRL: 175±10.58 μg dl(-1); SHAM: 114.60±7.81 μg dl(-1)) (P<0.05; ANOVA). Reduced iron metabolism after SCI may be one of the mechanisms involved in the pathogenesis of sleep-related movement disorders.
The SDF-1/CXCR4 axis promotes recovery after spinal cord injury by mediating bone marrow-derived from mesenchymal stem cells

PubMed Central

Wang, Xiao; Zhang, Yong-Le; Zhang, Ya-Dong; Xue, Feng

2017-01-01

This study aims to explore the role of the SDF-1/CXCR4 axis in mediating BMSCs and SCI recovery. BMSCs were collected and SCI rat models were established. Wistar rats were assigned into the blank control, sham, SCI, SCI + BMSCs, SCI + BMSCs + SDF-1, SCI + BMSCs + AMD3100 (an inhibitor of SDF-1/CXCR4 axis) and SCI + BMSCs + SDF-1 + AMD3100 groups. Hind limb motor function was measured 7, 14, 21 and 28 days after operation. qRT-PCR, western blotting and ELISA was performed to determine the expressions of SDF-1, CXCR4, NGF, BDNF, GFAP and GAP-43, TNF-α, IL-1β, L-6 and IFN-γ. Hind limb motor function scores 7 days after the operation were reduced in the SCI rats of the blank control and sham groups. Hind limb function was found to be better in the SCI + BMSCs and SCI + BMSCs + SDF-1 groups than in the SCI, SCI + BMSCs + AMD3100 and SCI + BMSCs + SDF-1 + AMD3100 groups 14, 21 and 28 days after operation. Furthermore, the SCI group had lower SDF-1, CXCR4, NGF, BDNF and GAP-43 expressions but higher GFAP, TNF-α, IL-1β, IL-6 and IFN-γ than the blank control and sham groups 28 days after operation. While, the SCI + BMSCs, SCI + BMSCs + SDF-1 and SCI + BMSCs + SDF-1 + AMD3100 groups displayed opposite trends to the SCI and SCI + BMSCs + AMD3100 groups. In conclusion, SDF-1/CXCR4 axis promotes recovery after SCI by mediating BMSCs. PMID:28099928
Note: A new method for directly reducing the sampling jitter noise of the digital phasemeter

NASA Astrophysics Data System (ADS)

Liang, Yu-Rong

2018-03-01

The sampling jitter noise is one non-negligible noise source of the digital phasemeter used for space gravitational wave detection missions. This note provides a new method for directly reducing the sampling jitter noise of the digital phasemeter, by adding a dedicated signal of which the frequency, amplitude, and initial phase should be pre-set. In contrast to the phase correction using the pilot-tone in the work of Burnett, Gerberding et al., Liang et al., Ales et al., Gerberding et al., and Ware et al. [M.Sc. thesis, Luleå University of Technology, 2010; Classical Quantum Gravity 30, 235029 (2013); Rev. Sci. Instrum. 86, 016106 (2015); Rev. Sci. Instrum. 86, 084502 (2015); Rev. Sci. Instrum. 86, 074501 (2015); and Proceedings of the Earth Science Technology Conference (NASA, USA, 2006)], the new method is intrinsically additive noise suppression. The experiment results validate that the new method directly reduces the sampling jitter noise without data post-processing and provides the same phase measurement noise level (10-6 rad/Hz1/2 at 0.1 Hz) as the pilot-tone correction.
Infrared Rydberg Transitions in B Stars.

NASA Astrophysics Data System (ADS)

Sigut, Thomas Allan Aaron

1995-01-01

The infrared solar spectrum exhibits emission lines near 12 μm from the Mg scI high-l Rydberg transitions 6g - 7h and 6h - 7i. Chang et al. (1991) demonstrated that the emission arises from small deviations in the populations of these Rydberg levels from their thermodynamic equilibrium values. In this thesis, the possible operation of this emission mechanism is investigated in the B stars by performing non-LTE radiative transfer calculations for the high-l Rydberg transitions of Mg scII and O scI. Highly realistic atomic models are employed, complete in energy levels and radiative transitions far into the Rydberg regime. For Mg scII, the collisional excitation rates are improved by computing collision strengths in a 10 state close-coupling approximation using the R-matrix method. The collisional excitation rates derived from these collisions strengths include the full effects of autoionizing resonances and have an expected accuracy of +/-10% for transitions between levels lying low in energy in the close-coupling expansion. For Mg scII, wide-ranging infrared emission is found, spanning the entire range of B spectral types. The emission is caused by the same mechanism operative in the Rydberg levels of Mg scI in the sun. Small divergences between the Rydberg departure coefficients produce rising monochromatic source functions and emission. Flux profiles of the Mg scII high-l ( Delta n = +1) transitions from n = 4 and 5 show an emission peak superposed on wider absorption trough, similar in form to the solar Mg scI lines, while for higher n, the profiles are in full emission. The strongest emission is predicted for transitions from n = 5, 6, and 7 and strongly increases for lower surface gravities where the rates of thermalizing collisions are lower. The emission strengths reach maxima of Flambda /Fc ~ 1.15 and Wlambda ~ -0.1 A. Transitions from higher n exhibit progressively lower continuum contrasts due to the steep rise with wavelength of the continuous opacity in the infrared and increased Stark broadening. The largest source of potential uncertainty affecting the emission strengths is the uncertain scale of the collisional excitation rates between the Rydberg levels. However, reasonable variations of these rates does not eliminate the emission. Although small divergences occur between the Rydberg departure coefficients of O scI, wide-ranging infrared emission is not predicted. Only small self-reversals in the cores of the high-l transitions from n = 4 and 5 are seen and then only at the lowest surface gravities. The failure of O scI to produce significant emission, or more precisely, significant Rydberg population divergences, can be attributed to the lack of strong ultraviolet photoionization rates from its lower energy levels, the increased collisional coupling between its more closely spaced Rydberg levels, and the longer wavelengths of its Rydberg transitions. Considerable uncertainty exists in the prediction of the absolute infrared line strengths of O scI due to uncertainty in the exact treatment or radiative transfer in the resonance line and in the magnitude of the collisional excitation rates among the Rydberg levels. However, these uncertainties do not alter the basic conclusion of no significant emission from the high-l Rydberg transitions of O scI in B stars.

CAPSTONE SENIOR DESIGN - SUPRAMOLECULAR PROTON EXCHANGE MEMBRANES FOR FUEL CELLS

EPA Science Inventory

In order to assume a leading role in the burgeoning hydrogen economy, new infrastructure will be required for fuel cell manufacturing and R&D capabilities. The objective of this proposal is the development of a new generation of advanced proton exchange membrane (PEM) technol...
Water-Soluble Nanodiamond (Postprint)

DTIC Science & Technology

2012-03-01

Lim, D.-S. Tribological behavior of PTFE film with nanodiamond. Surf. Coat. Technol. 2004, 188−189, 534−538. (9) Williams , O. A.; Nesladek, M.; Daenen...properties and applications. Russ. Chem. Rev. 2001, 70, 607−626. (27) Liang, Y.; Meinhardt, T.; Jarre, G.; Ozawa, M.; Vrodijak, P.; Scholl , A
THE U.S. ENVIRONMENTAL PROTECTION AGENCY'S SITE EMERGING TECHNOLOGY PROGRAM

EPA Science Inventory

Under the SITE Emerging Technology Program, the U.S. Environmental Protection Agency is seeking to foster the further development of technol- ogies that have been successfully tested at bench-scale and are now ready for pilot-scale testing, prior to field- or full-scale demonstra...
BIOREMEDIATION OF HAZARDOUS WASTES - RESEARCH, DEVELOPMENT AND FIELD EVALUATIONS - 1995

EPA Science Inventory

The proceedings of the 1995 Symposium on Bioremediation of Hazardous Wastes, hosted by the Office of Research and Development (ORD) of the EPA in Rye Brook, New York. he symposium was the eighth annual meeting for the presentation of research conducted by EPA's Biosystems Technol...
Methodological rigor and citation frequency in patient compliance literature.

PubMed Central

Bruer, J T

1982-01-01

An exhaustive bibliography which assesses the methodological rigor of the patient compliance literature, and citation data from the Science Citation Index (SCI) are combined to determine if methodologically rigorous papers are used with greater frequency than substandard articles by compliance investigators. There are low, but statistically significant, correlations between methodological rigor and citation indicators for 138 patient compliance papers published in SCI source journals during 1975 and 1976. The correlation is not strong enough to warrant use of citation measures as indicators of rigor on a paper-by-paper basis. The data do suggest that citation measures might be developed as crude indicators of methodological rigor. There is no evidence that randomized trials are cited more frequently than studies that employ other experimental designs. PMID:7114334
Games and Simulations for Climate, Weather and Earth Science Education

NASA Astrophysics Data System (ADS)

Russell, R. M.

2014-12-01

We will demonstrate several interactive, computer-based simulations, games, and other interactive multimedia. These resources were developed for weather, climate, atmospheric science, and related Earth system science education. The materials were created by the UCAR Center for Science Education. These materials have been disseminated via our web site (SciEd.ucar.edu), webinars, online courses, teacher workshops, and large touchscreen displays in weather and Sun-Earth connections exhibits in NCAR's Mesa Lab facility in Boulder, Colorado. Our group has also assembled a web-based list of similar resources, especially simulations and games, from other sources that touch upon weather, climate, and atmospheric science topics. We'll briefly demonstrate this directory. More info available at: scied.ucar.edu/events/agu-2014-games-simulations-sessions
Passive hind-limb cycling improves cardiac function and reduces cardiovascular disease risk in experimental spinal cord injury

PubMed Central

West, Christopher R; Crawford, Mark A; Poormasjedi-Meibod, Malihe-Sadat; Currie, Katharine D; Fallavollita, Andre; Yuen, Violet; McNeill, John H; Krassioukov, Andrei V

2014-01-01

Spinal cord injury (SCI) causes altered autonomic control and severe physical deconditioning that converge to drive maladaptive cardiac remodelling. We used a clinically relevant experimental model to investigate the cardio-metabolic responses to SCI and to establish whether passive hind-limb cycling elicits a cardio-protective effect. Initially, 21 male Wistar rats were evenly assigned to three groups: uninjured control (CON), T3 complete SCI (SCI) or T3 complete SCI plus passive hind-limb cycling (SCI-EX; 2 × 30 min day−1, 5 days week−1 for 4 weeks beginning 6 days post-SCI). On day 32, cardio-metabolic function was assessed using in vivo echocardiography, ex vivo working heart assessments, cardiac histology/molecular biology and blood lipid profiles. Twelve additional rats (n = 6 SCI and n = 6 SCI-EX) underwent in vivo echocardiography and basal haemodynamic assessments pre-SCI and at days 7, 14 and 32 post-SCI to track temporal cardiovascular changes. Compared with CON, SCI exhibited a rapid and sustained reduction in left ventricular dimensions and function that ultimately manifested as reduced contractility, increased myocardial collagen deposition and an up-regulation of transforming growth factor beta-1 (TGFβ1) and mothers against decapentaplegic homolog 3 (Smad3) mRNA. For SCI-EX, the initial reduction in left ventricular dimensions and function at day 7 post-SCI was completely reversed by day 32 post-SCI, and there were no differences in myocardial contractility between SCI-EX and CON. Collagen deposition was similar between SCI-EX and CON. TGFβ1 and Smad3 were down-regulated in SCI-EX. Blood lipid profiles were improved in SCI-EX versus SCI. We provide compelling novel evidence that passive hind-limb cycling prevents cardiac dysfunction and reduces cardiovascular disease risk in experimental SCI. PMID:24535438
Can dryland geoproxy data generate Quaternary palaeoclimate and palaeoenvironmental records?

NASA Astrophysics Data System (ADS)

Thomas, David S. G.

2017-04-01

Dryland regions present many challenges for robustly reconstructing late Quaternary palaeoenvironments and palaeoclimates, not least a common deficit, or considerable spatial variability, in the availability of high resolution biological proxy data sources. Substantial advances have been made in some regions in recent years, through the exploitation of new high resolution biomarker and isotope records, for example from hyrax middens (e.g. Chase et al., 2012) and from offshore sediments (e.g. Collins et al., 2014). In others however, suitable data sources for these approaches are absent, so these approaches are not available or if data are applied from distant sources, subject to risks of excessive spatial extrapolation of records in environmental contexts where environmental gradients are steep and variability is common (Thomas and Burrough, 2012, Thomas et al., 2013). In these contexts, geoproxy records, derived from the analysis of landforms and their associated sediments, are often utilised in dryland Quaternary research (e.g. Burrough and Thomas 2009, Stone and Thomas, 2013, Thomas, 2013, Lancaster et al., 2015), but with a number of associated difficulties (e.g. Chase, 2009). This paper examines these difficulties and then explores different approaches to the analysis of Quaternary landform records. It is argued that geoproxies with chronometric control, usually provided by OSL dating, have considerable potential to improve data on Quaternary environmental and climate dynamics, if records are interpreted effectively and appropriately (e.g. Bailey and Thomas, 2014, Thomas and Burrough, 2016). Examples of challenges and new approaches will be drawn from aeolian and fluvial domains, and from research in Africa, Australia and Arabia. Bailey RM, Thomas DSG 2014 Earth Surf. Proc. Landf. 39, 614-631. Burrough SL, Thomas DSG 2009. Geomorphology 103, 285-298. Chase, B 2009. Earth-Sci Rev. 93, 31-45. Chase BM et al. 2010 Quat. Sci. Rev. 56, 107-125. Collins JA et al. 2014 Earth Planet. Sci. Let. 398, 1-10. Lancaster N et al. 2016 Quat. Int. 410, 3-10. Stone AEC, Thomas DSG 2013 J. Arid Env. 93, 40-58. Thomas DSG 2013 Earth Surf. Proc. Landf. 38, 3-16. Thomas DSG, Burrough SL 2012 Quat. Int. 253, 5-17. Thomas DSG et al. 2012 J. Quat. Sci. 27, 7-12. Thomas DSG, Burrough SL 2016 Quat. Int. 410, 30-45.
A miniature laser ablation mass spectrometer for quantitative in situ chemical composition investigation of lunar surface

NASA Astrophysics Data System (ADS)

Brigitte Neuland, Maike; Grimaudo, Valentine; Mezger, Klaus; Moreno-García, Pavel; Riedo, Andreas; Tulej, Marek; Wurz, Peter

2016-04-01

The chemical composition of planetary bodies, moons, comets and asteroids is a key to understand their origin and evolution [Wurz,2009]. Measurements of the elemental and isotopic composition of rocks yield information about the formation of the planetary body, its evolution and following processes shaping the planetary surface. From the elemental composition, conclusions about modal mineralogy and petrology can be drawn. Isotope ratios are a sensitive indicator for past events on the planetary body and yield information about origin and transformation of the matter, back to events that occurred in the early solar system. Finally, measurements of radiogenic isotopes make it possible to carry out dating analyses. All these topics, particularly in situ dating analyses, quantitative elemental and highly accurate isotopic composition measurements, are top priority scientific questions for future lunar missions. An instrument for precise measurements of chemical composition will be a key element in scientific payloads of future landers or rovers on lunar surface. We present a miniature laser ablation mass spectrometer (LMS) designed for in situ research in planetary and space science and optimised for measurements of the chemical composition of rocks and soils on a planetary surface. By means of measurements of standard reference materials we demonstrate that LMS is a suitable instrument for in situ measurements of elemental and isotopic composition with high precision and accuracy. Measurements of soil standards are used to confirm known sensitivity coefficients of the instrument and to prove the power of LMS for quantitative elemental analyses [Neuland,2016]. For demonstration of the capability of LMS to measure the chemical composition of extraterrestrial material we use a sample of Allende meteorite [Neuland,2014]. Investigations of layered samples confirm the high spatial resolution in vertical direction of LMS [Grimaudo,2015], which allows in situ studying of past surface processes on a planetary surface. Analyses of Pb isotopes show that the statistical uncertainty for the age determination by LMS is about ±100 Myrs, if abundance of 206Pb and 207Pb is 20ppm and 2ppm respectively [Riedo,2013]. These Pb isotopes have abundances of tens to hundreds of ppm in lunar KREEP [Nemchin,2008]. We demonstrate the measurement capabilities of LMS for petrographic and mineralogical analyses, for isotopic studies and dating analyses, which are key topics for future missions to the Moon. Having the LMS instrument installed on a lunar rover would allow measuring the chemical composition of many rock and soil samples, distributed over a certain area, inside the South Pole Aitken Basin for example. LMS measurements would yield valuable conclusions about age and mineralogy. References: [Wurz,2009]Wurz,P. et al. 2009, AIP Conf.Proc., CP1144:70-75. [Grimaudo,2015]Grimaudo, V. et al. 2015, Anal.Chem. 87: 2037-2041. [Neuland,2014]Neuland, M.B. et al. 2014, Planet.Space Sci.101:196-209. [Neuland,2016]Neuland M.B. et al. 2016, Meas. Sci. Technol.,submitted. [Riedo,2013]Riedo A. et al., 2013 Planet. Space Sci. 87: 1-13. [Nemchin,2008]Nemchin et al., 2008 Geochim. Cosmochim.Acta 72:668-689.
Discrepancies between implicit and explicit self-concepts of intelligence: relations to modesty, narcissism, and achievement motivation

PubMed Central

Gerstenberg, Friederike X. R.; Imhoff, Roland; Banse, Rainer; Schmitt, Manfred

2014-01-01

Previous research has shown that different configurations of the implicit self-concept of intelligence (iSCI) and the explicit self-concept of intelligence (eSCI) are consistently related to individuals’ performance on different intelligence tests (Dislich etal., 2012). The results indicated that any discrepant configuration between the iSCI and the eSCI impairs performance. In the present study, how correspondence between the iSCI and the eSCI is related to intelligence test performance as well as personality traits of modesty (low eSCI, high iSCI), narcissism (high eSCI, low iSCI), and achievement motivation was investigated. Furthermore, a moderated mediation analysis showed that the relation between the iSCI–eSCI configurations and intelligence test performance was mediated by achievement motivation for modest individuals. PMID:24575063
INNOVATIVE TECHNOLOGY EVALUATION REPORT: RADIO FREQUENCY HEATING, KAI TECHNOLOGIES, INC.

EPA Science Inventory

A demonstration of KAI Technologies in-situ radio frequency heating system for soil treatment was conducted from January 1994 to July 1994 at Kelly Air Force Base in San Antonio, Texas. This demonstration was conducted as a joint effort between the USEPA and the USAF. The technol...
Maskless Lithography Using Surface Plasmon Enhanced Illumination

DTIC Science & Technology

2007-04-30

Dale Larson Figure 1. Nanohole array probes exhibiting extraordinary optical transmission of light with a high degree of collimation. Left: a bull’s...Technol. B 22, 3552-3556 (2004). 2. Stark, P., Halleck, A. E. & Larson, D. N. Short order nanohole arrays in metals for highly sensitive probing of local
The Phases Differential Astrometry Data Archive. 5. Candidate Substellar Companions to Binary Systems

DTIC Science & Technology

2010-12-01

Mathematics and Astronomy , 105-24, California Institute of Technology, Pasadena, CA 91125, USA 5 Nicolaus Copernicus Astronomical Center, Polish Academy...Blind Test with support from NASA contract NAS7-03001 (JPL 1336910). PHASES is funded in part by the California Institute of Technol- ogy Astronomy
Object-Oriented Dynamic Bayesian Network-Templates for Modelling Mechatronic Systems

DTIC Science & Technology

2002-05-04

daimlerchrysler.com Abstract are widespread. For modelling mechanical systems The object-oriented paradigma is a new but proven technol- ADAMS [31 or...hardware (sub-)systems. On the Software side thermal flow or hydraulics, see Figure 1. It also contains a the object-oriented paradigma is by now (at
Length of stay and medical stability for spinal cord-injured patients on admission to an inpatient rehabilitation hospital: a comparison between a model SCI trauma center and non-SCI trauma center.

PubMed

Ploumis, A; Kolli, S; Patrick, M; Owens, M; Beris, A; Marino, R J

2011-03-01

Retrospective database review. To compare lengths of stay (LOS), pressure ulcers and readmissions to the acute care hospital of patients admitted to the inpatient rehabilitation facility (IRF) from a model spinal cord injury (SCI) trauma center or from a non-SCI acute hospital. Only sparse data exist comparing the status of patients admitted to IRF from a model SCI trauma center or from a non-SCI acute hospital. Acute care, IRF and total LOS were compared between patients transferred to IRF from the SCI center (n=78) and from non-SCI centers (n=131). The percentages of pressure ulcers on admission to IRF and transfer back to acute care were also compared. Patients admitted to IRF from the SCI trauma center (SCI TC) had significantly shorter (P=0.01) acute care LOS and total LOS compared with patients admitted from non-SCI TCs. By neurological category, acute-care LOS was less for all groups admitted from the SCI center, but statistically significant only for tetraplegia. There was no significant difference in the incidence of readmissions to acute care from IRF. More patients from non-SCI centers (34%) than SCI centers (12%) had pressure ulcers (P<0.001). Acute care in organized SCI TCs before transfer to IRF can significantly lower acute-care LOS or total LOS and incidence of pressure ulcers compared with non-SCI TCs. Patients admitted to IRF from SCI TCs are no more likely to be sent back to an acute hospital than those from non-SCI TCs.
The Implementation Challenge and the Learning Health System for SCI Initiative.

PubMed

Stucki, Gerold; Bickenbach, Jerome

2017-02-01

The paper introduces the special issue by linking the International Spinal Cord Injury (InSCI) Community Survey study to the Learning Health System for SCI Initiative (LHS-SCI). The LHS-SCI was designed to respond to the implementation challenge of bringing about policy reform in light of the targeted policy recommendations of World Health Organization's International Perspectives on SCI report as well as the call for action of WHO's Global Disability Action Plan. The paper reviews the components of LHS-SCI relevant to internationally comparable information, a theory of change to guide for action, and the tools for evidence-informed policy. The interplay between persons, their health needs, and the societal response to those needs provides the foundation for the organization of the LHS-SCI Initiative. Moreover, as the other articles in this special issue describe in detail, the rationale, conceptualization, and study design of the InSCI study are also informed by the rationale, and mission, of the LHS for SCI Initiative. The LHS-SCI, and the implementation challenge that motivates it, is responsible for the design of the InSCI study and the overall mission of LHS-SCI to continuously improve the lived experience of people living with SCI around the world through an international evidence- and rights-informed research and policy reform effort.
Analysis of Scifinder Scholar and Web of Science Citation Searches.

ERIC Educational Resources Information Center

Whitley, Katherine M.

2002-01-01

With "Chemical Abstracts" and "Science Citation Index" both now available for citation searching, this study compares the duplication and uniqueness of citing references for works of chemistry researchers for the years 1999-2001. The two indexes cover very similar source material. This analysis of SciFinder Scholar and Web of…
Comment on {open_quote}{open_quote}Comments on the use of asymmetric monochromators for x-ray diffraction on a synchrotron source{close_quote}{close_quote} [Rev. Sci. Instrum. {bold 66}, 2174 (1995)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanchez del Rio, M.; Cerrina, F.

1996-10-01

In the article {open_quote}{open_quote}Comments on the use of asymmetric monochromators for x-ray diffraction on a synchrotron source,{close_quote}{close_quote} by Colin Nave, Ana Gonzalez, Graham Clark, Sean McSweeney, Stewart Cummings, and Michael Hart, Rev. Sci. Instrum. {bold 66}, 2174 (1995), paragraph II, the authors{close_quote} unfamiliarity with our modeling codes leads them to claim that our approach to treat bent-asymmetrically cut crystals in ray tracing calculations is incorrect. Since SHADOW is a widely used code, it is important to correct any misunderstandings, and we give here arguments to demonstrate that our approach is perfectly valid, and the arguments used by the authors tomore » criticize our method are based on an unwarranted conclusion extracted from one of our previous articles. We show that SHADOW, when properly run, treats the cases raised exactly. Indeed, their arguments provide a nice benchmark test for verifying the accuracy of SHADOW {copyright} {ital 1996 American Institute of Physics.}« less
a Chirped Pulse Fourier Transform Microwave Cp-Ftmw Spectrometer with Laser Ablation Source to Search for Actinide-Containing Molecules and Noble Metal Clusters

NASA Astrophysics Data System (ADS)

Marshall, Frank E.; Gillcrist, David Joseph; Persinger, Thomas D.; Moon, Nicole; Grubbs, G. S., II

2016-06-01

Microwave spectroscopic techniques have traditionally been part of the foundation of molecular structure and this conference. Instrumental developments by Brooks Pate and sourcing developments by Steve Cooke on these instruments have allowed for the dawning of a new era in modern microwave spectroscopic techniques. With these advances and the growth of powerful computational approaches, microwave spectroscopists can now search for molecules and/or cluster systems of actinide and noble metal-containing species with increasing certainty in molecular assignment even with the difficulties presented with spin-orbit coupling and relativistic effects. Spectrometer and ablation design will be presented along with any preliminary results on actinide-containing molecules or noble metal clusters or interactions. G. G. Brown, B. C. Dian, K. O. Douglass, S. M. Geyer, S. T. Shipman, B. H. Pate, Rev. Sci. Instrum. 79 (2008) 053103-1 - 053103-13 G. S. Grubbs II, C. T. Dewberry, K. C. Etchison, K. E. Kerr, S. A. Cooke, Rev. Sci. Instrum. 78 (2007) 096106-1 - 096106-3
Feelings of burden among family caregivers of people with spinal cord injury in Turkey.

PubMed

Secinti, E; Yavuz, H M; Selcuk, B

2017-08-01

The study was designed as a cross-sectional survey. The purpose of the study was to examine the level of feelings of burden in family caregivers of people with spinal cord injury (SCI) in Turkey, and to explore its predictors. Turkey. One hundred family caregivers of people with SCI completed measures of burden of caregiving, depression, social support and physical health. The SCI participants completed a measure of functional independence. Multivariate statistics and structural equation modeling (SEM) were conducted to identify significant predictors of caregiver burden. Caregiver burden was significantly related to caregivers' feelings of depression. SEM analysis showed that social support from family and from friends predicted caregiver burden via depression. Caregivers' age, sex, educational level, physical health and household income did not significantly predict their feelings of depression or burden. Our findings revealed that support received from both families and friends is an important source for alleviating the depressive feelings of caregivers and, in return, their burden in the caregiving. In Turkey, high support from family members is expected and is important for psychological well-being, yet the current study showed that the support received from friends also has unique contribution to the well-being of the caregivers of persons with SCI. Overall, our findings highlight the importance of supportive relationships between family as well as friends for the caregivers who may have to provide lifetime care for their family member with special needs.

When Pain Hurts: Nociceptive Stimulation Induces a State of Maladaptive Plasticity and Impairs Recovery after Spinal Cord Injury.

PubMed

Grau, James W; Huang, Yung-Jen; Turtle, Joel D; Strain, Misty M; Miranda, Rajesh C; Garraway, Sandra M; Hook, Michelle A

2017-05-15

Spinal cord injury (SCI) is often accompanied by other tissue damage (polytrauma) that provides a source of pain (nociceptive) input. Recent findings are reviewed that show SCI places the caudal tissue in a vulnerable state that exaggerates the effects nociceptive stimuli and promotes the development of nociceptive sensitization. Stimulation that is both unpredictable and uncontrollable induces a form of maladaptive plasticity that enhances nociceptive sensitization and impairs spinally mediated learning. In contrast, relational learning induces a form of adaptive plasticity that counters these adverse effects. SCI sets the stage for nociceptive sensitization by disrupting serotonergic (5HT) fibers that quell overexcitation. The loss of 5HT can enhance neural excitability by reducing membrane-bound K + -Cl - cotransporter 2, a cotransporter that regulates the outward flow of Cl - . This increases the intracellular concentration of Cl - , which reduces the hyperpolarizing (inhibitory) effect of gamma-aminobutyric acid. Uncontrollable noxious stimulation also undermines the recovery of locomotor function, and increases behavioral signs of chronic pain, after a contusion injury. Nociceptive stimulation has a greater effect if experienced soon after SCI. This adverse effect has been linked to a downregulation in brain-derived neurotrophic factor and an upregulation in the cytokine, tumor necrosis factor. Noxious input enhances tissue loss at the site of injury by increasing the extent of hemorrhage and apoptotic/pyroptotic cell death. Intrathecal lidocaine blocks nociception-induced hemorrhage, cellular indices of cell death, and its adverse effect on behavioral recovery. Clinical implications are discussed.
A cellular spinal cord scaffold seeded with rat adipose-derived stem cells facilitates functional recovery via enhancing axon regeneration in spinal cord injured rats

PubMed Central

Yin, Hong; Jiang, Tao; Deng, Xi; Yu, Miao; Xing, Hui; Ren, Xianjun

2018-01-01

Spinal cord injury (SCI), usually resulting in severe sensory and motor deficits, is a major public health concern. Adipose-derived stem cells (ADSCs), one type of adult stem cell, are free from ethical restriction, easily isolated and enriched. Therefore, ADSCs may provide a feasible cell source for cell-based therapies in treatment of SCI. The present study successfully isolated rat ADSCs (rADSCs) from Sprague-Dawley male rats and co-cultured them with acellular spinal cord scaffolds (ASCs). Then, a rat spinal cord hemisection model was built and rats were randomly divided into 3 groups: SCI only, ASC only, and ASC + ADSCs. Furthermore, behavioral tests were conducted to evaluate functional recovery. Hematoxylin & Eosin staining and immunofluorence were carried out to assess histopathological remodeling. In addition, biotinylated dextran amines anterograde tracing was employed to visualize axon regeneration. The data demonstrated that harvested cells, which were positive for cell surface antigen cluster of differentiation (CD) 29, CD44 and CD90 and negative for CD4, detected by flow cytometry analysis, held the potential to differentiate into osteocytes and adipocytes. Rats that received transplantation of ASCs seeded with rADSCs benefited greatly in functional recovery through facilitation of histopathological rehabilitation, axon regeneration and reduction of reactive gliosis. rADSCs co-cultured with ASCs may survive and integrate into the host spinal cord on day 14 post-SCI. PMID:29257299
DESIGN OF THE SILENT CEREBRAL INFARCT TRANSFUSION (SIT) TRIAL

PubMed Central

Casella, James F.; King, Allison A.; Barton, Bruce; White, Desiree A.; Noetzel, Michael J.; Ichord, Rebecca N.; Terrill, Cindy; Hirtz, Deborah; McKinstry, Robert C.; Strouse, John J.; Howard, Thomas H.; Coates, Thomas D.; Minniti, Caterina P; Campbell, Andrew D.; Vendt, Bruce A.; Lehmann, Harold; DeBaun, Michael R.

2017-01-01

Background Silent cerebral infarct (SCI) is the most common cause of serious neurological disease in sickle cell anemia (SCA), affecting approximately 22% of children. The goal of this trial is to determine whether blood transfusion therapy will reduce further neurological morbidity in children with SCI, and if so, the magnitude of this benefit. Procedure The Silent Cerebral Infarct Transfusion (SIT) Trial includes 29 clinical sites and 3 subsites, a Clinical Coordinating Center, and a Statistical and Data Coordinating Center, to test the following hypothesis: prophylactic blood transfusion therapy in children with SCI will result in at least an 86% reduction in the rate of subsequent overt strokes or new or progressive cerebral infarcts as defined by magnetic resonance imaging (MRI) of the brain. The intervention is blood transfusion versus observation. Two hundred and four participants (102 in each treatment assignment) will ensure 85% power to detect the effect necessary to recommend transfusion therapy (86% reduction), after accounting for 10% drop out and 19% crossover rates. MRI examination of the brain is done at screening, immediately before randomization and study exit. Each randomly assigned participant receives a cognitive test battery at study entry, 12–18 months later, and study exit and an annual neurological examination. Blood is obtained from all screened participants for a biologic repository containing serum and a renewable source of DNA. Conclusion The SIT Trial could lead to a change in standard care practices for children affected with SCA and SCI, with a consequent reduction in neurological morbidity. PMID:20201689
Characterization of Volitional Electromyographic Signals in the Lower Extremity After Motor Complete Spinal Cord Injury.

PubMed

Heald, Elizabeth; Hart, Ronald; Kilgore, Kevin; Peckham, P Hunter

2017-06-01

Previous studies have demonstrated the presence of intact axons across a spinal cord lesion, even in those clinically diagnosed with complete spinal cord injury (SCI). These axons may allow volitional motor signals to be transmitted through the injury, even in the absence of visible muscle contraction. To demonstrate the presence of volitional electromyographic (EMG) activity below the lesion in motor complete SCI and to characterize this activity to determine its value for potential use as a neuroprosthetic command source. Twenty-four subjects with complete (AIS A or B), chronic, cervical SCI were tested for the presence of volitional below-injury EMG activity. Surface electrodes recorded from 8 to 12 locations of each lower limb, while participants were asked to attempt specific movements of the lower extremity in response to visual and audio cues. EMG trials were ranked through visual inspection, and were scored using an amplitude threshold algorithm to identify channels of interest with volitional motor unit activity. Significant below-injury muscle activity was identified through visual inspection in 16 of 24 participants, and visual inspection rankings were well correlated to the algorithm scoring. The surface EMG protocol utilized here is relatively simple and noninvasive, ideal for a clinical screening tool. The majority of subjects tested were able to produce a volitional EMG signal below their injury level, and the algorithm developed allows automatic identification of signals of interest. The presence of this volitional activity in the lower extremity could provide an innovative new command signal source for implanted neuroprostheses or other assistive technology.
Hygroscopic Growth and Activation of Particles containing Algea-Exudate

NASA Astrophysics Data System (ADS)

Wex, Heike; Fuentes, Elena; Tsagkogeorgas, Georgios; Voigtländer, Jens; Clauss, Tina; Kiselev, Alexei; Green, David; Coe, Hugh; McFiggans, Gordon; Stratmann, Frank

2010-05-01

A large amount of the Earth is covered by oceans, which provide a constant source of marine aerosol particles, produced due to bubble bursting processes that depend on wind speed (O'Dowd and de Leeuw, 2007). In general, marine particles can be assumed to play an important role for the Earth atmosphere on a global scale, due to their abundance and due to their effect on clouds. E.g. marine stratus and stratocumulus clouds contribute about 30% to 40% to the Earth's albedo (Randall et al., 1984). The activation of aerosol particles to cloud droplets depends on the hygroscopic properties of the particles, which, in turn, depend on their chemical composition. For marine particles, is has been and still is discussed what the effects of organic substances being present in the particles might be. These substances originate from marine biota where they enrich at the ocean surface. To mimic marine aerosol particles, algae-exudates of different algae species were mixed with artificial sea-water. These samples were used in the laboratory to produce particles via a bubble bursting process (Fuentes et al., 2009). The hygroscopic growth and activation of the (size selected) particles was measured, using LACIS (Leipzig Aerosol Cloud Interaction Simulator, Stratmann et al., 2004) and the DMT-CCNc (Cloud Condensation Nucleus counter from Droplet Measurement Technologies, Roberts and Nenes, 2005). The hygroscopic growth was measured twice, 3 and 10 seconds after humidification, and no difference in the grown size was detected, i.e. no kinetic effect was observed for the examined time range. From LACIS and CCNc measurements, the hygroscopicity was deduced through determination of the amount of ions being effective in the particle / droplet solution (Rho(ion), Wex et al., 2007). A concentration dependent non-ideal behaviour was found for particles produced from an artificial sea-water sample that contained only inorganic salts, as can be expected (see e.g. Niedermeier et al., 2008). For particles containing also algae-exudate, however, the concentration dependent non-ideal behaviour was quenched, resulting in a quasi ideal solution behavior. Such solutions could be described by a single-parameter representation for all water-vapour saturations at which measurements had been done (from 0.8 up to supersaturation). References: Fuentes, E., H. Coe, D. Green, G. De Leeuw, and G. McFiggans (2009), Laboratory-generated primary marine aerosol via bubble-bursting and atomization, Aerosol Meas. Tech. Discuss., 2, 2281-2320. O'Dowd, C. D., and G. de Leeuw (2007), Marine aerosol production: A review of the current knowledge, Phil. Trans. R. Soc. A, 365(1856), 1753-1774, doi:1710.1098/rsta.2007.2043. Niedermeier, D., H. Wex, J. Voigtländer, F. Stratmann, E. Brüggemann, A. Kiselev, H. Henk, and J. Heintzenberg (2008), LACIS-measurements and parameterization of sea-salt particle hygroscopic growth and activation, Atmos. Chem. Phys., 8, 579-590. Randall, D. A., Coakley, J. A., Fairall, C. W., Kropfli, R. A., and Lenschow, D. H. (1984) Outlook for research on subtropical marine stratiform clouds, Bull. Am. Meteor. Soc., 65, 1290-1301, 1984. Roberts, G., and A. Nenes (2005), A continuous-flow streamwise thermal-gradient CCN chamber for atmospheric measurements, Aerosol Sci. Technol., 39, 206-221. Stratmann, F., A. Kiselev, S. Wurzler, M. Wendisch, J. Heintzenberg, R. J. Charlson, K. Diehl, H. Wex, and S. Schmidt (2004), Laboratory studies and numerical simulations of cloud droplet formation under realistic super-saturation conditions, J. Atmos. Oceanic Technol., 21, 876-887. Wex, H., T. Hennig, I. Salma, R. Ocskay, A. Kiselev, S. Henning, A. Massling, A. Wiedensohler, and F. Stratmann (2007), Hygroscopic growth and measured and modeled critical super-saturations of an atmospheric HULIS sample, Geophys. Res. Lett., 34(L02818), doi:10.1029/2006GL028260.
The Influence of Ridge Geometry at the Ultraslow-Spreading Southwest Indiean Ridge (9 deg - 25 deg E): Basalt Composition Sensitivity to Variations in Source and Process

DTIC Science & Technology

2006-02-01

East Pacific Rise , 5 degrees 30’-14 degrees 30’ N , Natures, 322, 422-429. Langmuir, C. H., E. M. Klein, and T. Plank (1992...Mantle source heterogeneity and melting processes beneath seafloor spreading centers: The East Pacific Rise , 18 degrees -19 degrees S, Journal of... East Pacific Rise , Aumento, F., and H. Loubat, The Mid-Atlantic Ridge Near Proc. Ocean Drill. Program Sci. Results, 147, 103-134,
A Review of Theoretical Frameworks for Supply Chain Integration

NASA Astrophysics Data System (ADS)

Thoo, AC; Tan, LC; Sulaiman, Z.; Zakuan, N.

2017-06-01

In a world of fierce competition and business driven by speed to market, good quality and low costs, this environment requires firms to have a source of competitive advantage that is inimitable and non-substitutable. For a supply chain integration (SCI) strategy to achieve sustainable competitive advantage it must be non-substitutable, inimitable, path-dependent and developed over time. Also, an integrated supply chain framework is needed to tie the whole network together in order to reduce perennial supply chain challenges such as functional silos, poor transparency of knowledge and information and the inadequate formation of appropriate customer and supplier relationships. Therefore, this paper aims to evaluate the competitive impact of a SCI strategy on firm performance using the theory of Resource-based View (RBV) and relational view.
Exploring Pupils' Beliefs about Designers and Designing

ERIC Educational Resources Information Center

Trebell, Donna

2011-01-01

The purpose of this paper is to report on an investigation into pupil beliefs about designers and designing conducted as part of a research project focusing on Designerly Activity in Secondary Design and Technology which builds upon a pilot study (Barlex and Trebell in "Int J Technol Design Educ," 2007). Four research questions drove this element…
New National Cryo-EM Facility Provides Access to Cutting-Edge Technology for Cancer Research Community | Frederick National Laboratory for Cancer Research

Cancer.gov

Cancer researchers nationwide now have access to the latest technology in the field of cryo-electron microscopy (cryo-EM)—the study of protein structures at atomic resolution—at the Frederick National Lab for Cancer Research. The emerging technol
Effect of Ocean Interannual Variability on Acoustic Propagation in the Philippine Sea and South China Sea

DTIC Science & Technology

2017-06-01

Coronas , 1920). The dominant pattern of interannual variability is the El Nino Southern Oscillation (ENSO), which has two quasi-periodic states...Validation of Wavewatch-III using TOPEX/ Poseidon data. J. Atmos. Oceanic Technol., 21, 1718–1733. Coronas , J., 1920: The climate and weather of the
IEA/Annex II Powder Characterization Cooperative Program

DTIC Science & Technology

1989-06-01

entatie Sampling of Particks with a Spinning Riffler. Stochastic ModeL Powder Technol., v. 19, 1978. p. 227-233 6. CHARLIER, R., and GOOSSENS , P. J. D...12222 St. Paul, Mix 55144 1 ATTN: Prof. W. A. Lanfo d ATTN: R. E. Richards State University of New York at Stony Brook, Department of Technology
Fundamental Properteries and Capabilities of Plasmonic Antennas for Efficient Interaction with Nanoeletronics

DTIC Science & Technology

2015-08-20

the THz region. Microwave Opt. Technol. Lett. 48, 524-529 (2006). 57. Huo, Y., Taylor, G. W. & Bansal , R. Planar log-periodic antennas on extended...Berry, M. R. Hashemi and M. Jarrahi, Appl. Phys. Lett. 14, 081122, 2014. [39] Y. Huo, G. W. Taylor and R. Bansal , J. Infrared, Millimeter and
Increasing specialty care access through use of an innovative home telehealth-based spinal cord injury disease management protocol (SCI DMP)

PubMed Central

Seton, Jacinta M.; Washington, Monique; Tomlinson, Suk C.; Phrasavath, Douangmala; Farrell, Karen R.; Goldstein, Barry

2016-01-01

Background A spinal cord injury disease management protocol (SCI DMP) was developed to address the unique medical, physical, functional, and psychosocial needs of those living with spinal cord injuries and disorders (SCI/D). The SCI DMP was piloted to evaluate DMP clinical content and to identify issues for broader implementation across the Veterans Affairs (VA) SCI System of Care. Methods Thirty-three patients with SCI/D from four VA SCI centers participated in a 6-month pilot. Patients received customized SCI DMP questions through a data messaging device (DMD). Nurse home telehealth care coordinators (HTCC) monitored responses and addressed clinical alerts daily. One site administered the Duke Severity of Illness (DUSOI) Checklist and Short Form-8 (SF-8™) to evaluate the changes in comorbidity severity and health-related quality of life while on the SCI DMP. Results Patients remained enrolled an average of 116 days, with a mean response rate of 56%. The average distance between patient's home and their VA SCI center was 59 miles. Feedback on SCI DMP content and the DMD included requests for additional clinical topics, changes in administration frequency, and adapting the DMD for functional impairments. Improvement in clinical outcomes was seen in a subset of patients enrolled on the SCI DMP. Conclusion SCI HTCCs and patients reported that the program was most beneficial for newly injured patients recently discharged from acute rehabilitation that live far from specialty SCI care facilities. SCI DMP content changes and broader implementation strategies are currently being evaluated based on lessons learned from the pilot. PMID:24617497
Increasing specialty care access through use of an innovative home telehealth-based spinal cord injury disease management protocol (SCI DMP).

PubMed

Woo, Christine; Seton, Jacinta M; Washington, Monique; Tomlinson, Suk C; Phrasavath, Douangmala; Farrell, Karen R; Goldstein, Barry

2016-01-01

A spinal cord injury disease management protocol (SCI DMP) was developed to address the unique medical, physical, functional, and psychosocial needs of those living with spinal cord injuries and disorders (SCI/D). The SCI DMP was piloted to evaluate DMP clinical content and to identify issues for broader implementation across the Veterans Affairs (VA) SCI System of Care. Thirty-three patients with SCI/D from four VA SCI centers participated in a 6-month pilot. Patients received customized SCI DMP questions through a data messaging device (DMD). Nurse home telehealth care coordinators (HTCC) monitored responses and addressed clinical alerts daily. One site administered the Duke Severity of Illness (DUSOI) Checklist and Short Form-8 (SF-8™) to evaluate the changes in comorbidity severity and health-related quality of life while on the SCI DMP. Patients remained enrolled an average of 116 days, with a mean response rate of 56%. The average distance between patient's home and their VA SCI center was 59 miles. Feedback on SCI DMP content and the DMD included requests for additional clinical topics, changes in administration frequency, and adapting the DMD for functional impairments. Improvement in clinical outcomes was seen in a subset of patients enrolled on the SCI DMP. SCI HTCCs and patients reported that the program was most beneficial for newly injured patients recently discharged from acute rehabilitation that live far from specialty SCI care facilities. SCI DMP content changes and broader implementation strategies are currently being evaluated based on lessons learned from the pilot.
Source terms, shielding calculations and soil activation for a medical cyclotron.

PubMed

Konheiser, J; Naumann, B; Ferrari, A; Brachem, C; Müller, S E

2016-12-01

Calculations of the shielding and estimates of soil activation for a medical cyclotron are presented in this work. Based on the neutron source term from the 18 O(p,n) 18 F reaction produced by a 28 MeV proton beam, neutron and gamma dose rates outside the building were estimated with the Monte Carlo code MCNP6 (Goorley et al 2012 Nucl. Technol. 180 298-315). The neutron source term was calculated with the MCNP6 code and FLUKA (Ferrari et al 2005 INFN/TC_05/11, SLAC-R-773) code as well as with supplied data by the manufacturer. MCNP and FLUKA calculations yielded comparable results, while the neutron yield obtained using the manufacturer-supplied information is about a factor of 5 smaller. The difference is attributed to the missing channels in the manufacturer-supplied neutron source terms which considers only the 18 O(p,n) 18 F reaction, whereas the MCNP and FLUKA calculations include additional neutron reaction channels. Soil activation was performed using the FLUKA code. The estimated dose rate based on MCNP6 calculations in the public area is about 0.035 µSv h -1 and thus significantly below the reference value of 0.5 µSv h -1 (2011 Strahlenschutzverordnung, 9 Auflage vom 01.11.2011, Bundesanzeiger Verlag). After 5 years of continuous beam operation and a subsequent decay time of 30 d, the activity concentration of the soil is about 0.34 Bq g -1 .
Psychometric evaluation of the Spanish version of the MPI-SCI.

PubMed

Soler, M D; Cruz-Almeida, Y; Saurí, J; Widerström-Noga, E G

2013-07-01

Postal surveys. To confirm the factor structure of the Spanish version of the MPI-SCI (MPI-SCI-S, Multidimensional Pain Inventory in the SCI population) and to test its internal consistency and construct validity in a Spanish population. Guttmann Institute, Barcelona, Spain. The MPI-SCI-S along with Spanish measures of pain intensity (Numerical Rating Scale), pain interference (Brief Pain Inventory), functional independence (Functional Independence Measure), depression (Beck Depression Inventory), locus of control (Multidimensional health Locus of Control), support (Functional Social Support Questionnaire (Duke-UNC)), psychological well-being (Psychological Global Well-Being Index) and demographic/injury characteristics were assessed in persons with spinal cord injury (SCI) and chronic pain (n=126). Confirmatory factor analysis suggested an adequate factor structure for the MPI-SCI-S. The internal consistency of the MPI-SCI-S subscales ranged from acceptable (r=0.66, Life Control) to excellent (r=0.94, Life Interference). All MPI-SCI-S subscales showed adequate construct validity, with the exception of the Negative and Solicitous Responses subscales. The Spanish version of the MPI-SCI is adequate for evaluating chronic pain impact following SCI in a Spanish-speaking population. Future studies should include additional measures of pain-related support in the Spanish-speaking SCI population.
Infertility in Men with Spinal Cord Injury: Research and Treatment

PubMed Central

Brackett, Nancy L.

2012-01-01

Spinal cord injury (SCI) occurs most often to young men. Following SCI, most men are infertile due to a combination of erectile dysfunction, ejaculatory dysfunction and semen abnormalities. Erectile dysfunction may be treated by the same therapies that are used in the general population. Similarly, the same treatments that are effective to assist conception in couples with non-SCI male factor patients are effective in assisting conception in SCI male-factor patients. The most apparent differences in male-factor symptoms between SCI and non-SCI patients are the high occurrences of anejaculation and atypical semen profiles in men with SCI. Methods available to assist ejaculation in men with SCI include penile vibratory stimulation and EEJ. Use of surgical sperm retrieval as the first line of treatment for anejaculation in men with SCI is controversial. Most men with SCI have a unique semen profile characterized by normal sperm concentration, but abnormally low sperm motility. Toxic substances in the semen contribute to this problem. Despite impaired sperm parameters, pregnancy outcomes using sperm from men with SCI are similar to pregnancy outcomes using sperm from non-SCI men. Future studies should focus on improving natural ejaculation and improving semen quality in these men. PMID:24278717
Prevalence and Etiology of Hypogonadism in Young Men With Chronic Spinal Cord Injury: A Cross-Sectional Analysis From Two University-Based Rehabilitation Centers.

PubMed

Sullivan, Shannon D; Nash, Mark S; Tefera, Eshetu; Tinsley, Emily; Blackman, Marc R; Groah, Suzanne

2017-08-01

Spinal cord injury (SCI) triggers an "accelerated aging" process that may include development of hypogonadism, even among younger men with SCI; however, few studies have investigated the prevalence or etiology of hypogonadism in men with SCI. Young men with SCI also are at increased risk for developing metabolic dysfunction after injury, which may be exacerbated by concomitant testosterone (T) deficiency, thus identifying the prevalence and risk factors for T deficiency in men with SCI is important for their long-term health. To investigate the prevalence, risk factors, and etiology of T deficiency (hypogonadism) in otherwise-healthy men with chronic, motor complete SCI. Secondary cross-sectional analysis. Rehabilitation research centers in Washington, DC, and Miami, Florida. Men (n = 58) aged 18-45 years with chronic (≥1 year), motor complete SCI without comorbidities or use of testosterone therapy. Plasma concentrations of hormones were measured with standardized assays. Body composition was assessed with dual-energy x-ray absorptiometry scan. Serum total T and calculated free T. T deficiency was more common in men after SCI than in a matched cohort of similarly-aged men without SCI (25%, SCI versus 6.7%, non-SCI, P < .001). The risk of hypogonadism appeared to be increased in men with more extensive injury and with higher percent body fat. The majority of men with SCI with low T had low serum LH levels, suggesting that central suppression of the hypothalamic-pituitary-gonadal axis may be the most common etiology of hypogonadism after SCI. Hypogonadism is more common in young men with SCI than in similarly aged men without SCI, suggesting that SCI should be identified as a risk factor for T deficiency and that routine screening for hypogonadism should be performed in the SCI population. II. Copyright © 2017 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.
Development and characterization of a PHB-HV-based 3D scaffold for a tissue engineering and cell-therapy combinatorial approach for spinal cord injury regeneration.

PubMed

Ribeiro-Samy, Silvina; Silva, Nuno A; Correlo, Vitor M; Fraga, Joana S; Pinto, Luísa; Teixeira-Castro, Andreia; Leite-Almeida, Hugo; Almeida, Armando; Gimble, Jeffrey M; Sousa, Nuno; Salgado, António J; Reis, Rui L

2013-11-01

Spinal cord injury (SCI) leads to devastating neurological deficits. Several tissue engineering (TE)-based approaches have been investigated for repairing this condition. Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHB-HV) is found to be particularly attractive for TE applications due to its properties, such as biodegradability, biocompatibility, thermoplasticity and piezoelectricity. Hence, this report addresses the development and characterization of PHB-HV-based 3D scaffolds, produced by freeze-drying, aimed to SCI treatment. The obtained scaffolds reveal an anisotropic morphology with a fully interconnected network of pores. In vitro studies demonstrate a lack of cytotoxic effect of PHB-HV scaffolds. Direct contact assays also reveal their ability to support the culture of CNS-derived cells and mesenchymal-like stem cells from different sources. Finally, histocompatibility studies show that PHB-HV scaffolds are well tolerated by the host tissue, and do not negatively impact the left hindlimb locomotor function recovery. Therefore results herein presented suggest that PHB-HV scaffolds may be suitable for SCI treatment. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Combined SCI and TBI: Recovery of forelimb function after unilateral cervical spinal cord injury (SCI) is retarded by contralateral traumatic brain injury (TBI), and ipsilateral TBI balances the effects of SCI on paw placement

PubMed Central

Inoue, Tomoo; Lin, Amity; Ma, Xiaokui; McKenna, Stephen L.; Creasey, Graham H.; Manley, Geoffrey T.; Ferguson, Adam R.; Bresnahan, Jacqueline C.; Beattie, Michael S.

2015-01-01

A significant proportion (estimates range from 16–74%) of patients with spinal cord injury (SCI) have concomitant traumatic brain injury (TBI), and the combination often produces difficulties in planning and implementing rehabilitation strategies and drug therapies. For example, many of the drugs used to treat SCI may interfere with cognitive rehabilitation, and conversely drugs that are used to control seizures in TBI patients may undermine locomotor recovery after SCI. The current paper presents an experimental animal model for combined SCI and TBI to help drive mechanistic studies of dual diagnosis. Rats received a unilateral SCI (75 kdyn) at C5 vertebral level, a unilateral TBI (2.0 mm depth, 4.0 m/s velocity impact on the forelimb sensori-motor cortex), or both SCI + TBI. TBI was placed either contralateral or ipsilateral to the SCI. Behavioral recovery was examined using paw placement in a cylinder, grooming, open field locomotion, and the IBB cereal eating test. Over 6 weeks, in the paw placement test, SCI + contralateral TBI produced a profound deficit that failed to recover, but SCI + ipsilateral TBI increased the relative use of the paw on the SCI side. In the grooming test, SCI + contralateral TBI produced worse recovery than either lesion alone even though contralateral TBI alone produced no observable deficit. In the IBB forelimb test, SCI + contralateral TBI revealed a severe deficit that recovered in 3 weeks. For open field locomotion, SCI alone or in combination with TBI resulted in an initial deficit that recovered in 2 weeks. Thus, TBI and SCI affected forelimb function differently depending upon the test, reflecting different neural substrates underlying, for example, exploratory paw placement and stereotyped grooming. Concurrent SCI and TBI had significantly different effects on outcomes and recovery, depending upon laterality of the two lesions. Recovery of function after cervical SCI was retarded by the addition of a moderate TBI in the contralateral hemisphere in all tests, but forepaw placements were relatively increased by an ipsilateral TBI relative to SCI alone, perhaps due to the dual competing injuries influencing the use of both forelimbs. These findings emphasize the complexity of recovery from combined CNS injuries, and the possible role of plasticity and laterality in rehabilitation, and provide a start towards a useful preclinical model for evaluating effective therapies for combine SCI and TBI. PMID:23770071

Combined SCI and TBI: recovery of forelimb function after unilateral cervical spinal cord injury (SCI) is retarded by contralateral traumatic brain injury (TBI), and ipsilateral TBI balances the effects of SCI on paw placement.

PubMed

Inoue, Tomoo; Lin, Amity; Ma, Xiaokui; McKenna, Stephen L; Creasey, Graham H; Manley, Geoffrey T; Ferguson, Adam R; Bresnahan, Jacqueline C; Beattie, Michael S

2013-10-01

A significant proportion (estimates range from 16 to 74%) of patients with spinal cord injury (SCI) have concomitant traumatic brain injury (TBI), and the combination often produces difficulties in planning and implementing rehabilitation strategies and drug therapies. For example, many of the drugs used to treat SCI may interfere with cognitive rehabilitation, and conversely drugs that are used to control seizures in TBI patients may undermine locomotor recovery after SCI. The current paper presents an experimental animal model for combined SCI and TBI to help drive mechanistic studies of dual diagnosis. Rats received a unilateral SCI (75 kdyn) at C5 vertebral level, a unilateral TBI (2.0 mm depth, 4.0 m/s velocity impact on the forelimb sensori-motor cortex), or both SCI+TBI. TBI was placed either contralateral or ipsilateral to the SCI. Behavioral recovery was examined using paw placement in a cylinder, grooming, open field locomotion, and the IBB cereal eating test. Over 6weeks, in the paw placement test, SCI+contralateral TBI produced a profound deficit that failed to recover, but SCI+ipsilateral TBI increased the relative use of the paw on the SCI side. In the grooming test, SCI+contralateral TBI produced worse recovery than either lesion alone even though contralateral TBI alone produced no observable deficit. In the IBB forelimb test, SCI+contralateral TBI revealed a severe deficit that recovered in 3 weeks. For open field locomotion, SCI alone or in combination with TBI resulted in an initial deficit that recovered in 2 weeks. Thus, TBI and SCI affected forelimb function differently depending upon the test, reflecting different neural substrates underlying, for example, exploratory paw placement and stereotyped grooming. Concurrent SCI and TBI had significantly different effects on outcomes and recovery, depending upon laterality of the two lesions. Recovery of function after cervical SCI was retarded by the addition of a moderate TBI in the contralateral hemisphere in all tests, but forepaw placements were relatively increased by an ipsilateral TBI relative to SCI alone, perhaps due to the dual competing injuries influencing the use of both forelimbs. These findings emphasize the complexity of recovery from combined CNS injuries, and the possible role of plasticity and laterality in rehabilitation, and provide a start towards a useful preclinical model for evaluating effective therapies for combine SCI and TBI. Copyright © 2013 Elsevier Inc. All rights reserved.
Neuroprotective effects of lycopene in spinal cord injury in rats via antioxidative and anti-apoptotic pathway.

PubMed

Hu, Wei; Wang, Hongbo; Liu, Zhenfeng; Liu, Yanlu; Wang, Rong; Luo, Xiao; Huang, Yifei

2017-03-06

Oxidative damage induced-mitochondrial dysfunction and apoptosis has been widely studied in spinal cord injury (SCI). Lycopene, a polyunsaturated hydrocarbon, has the highest antioxidant capacity compared to the other carotenoids. However, the role of lycopene in SCI is unknown. In the present study, we evaluated the antioxidant effects of lycopene on mitochondrial dysfunction and apoptosis following T10 contusion SCI in rats. The rats were randomized into 5 groups: the sham group, the SCI group and the SCI pre-treated with lycopene (5, 10, or 20mg/kg) group. The SCI group showed increased malondialdehyde (MDA) content, decreased superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) ability, which indicated that SCI could induce oxidative damage. What's more, the SCI group showed decreased mRNA expression of cytochrome b and mitochondrial transcription factor A (Tfam), and decreased mitochondrial membrane potential (ΔYm), which indicated that SCI could induce mitochondrial dysfunction. Besides, the SCI group showed decreased protein expression of bcl-2 and mitochondrial cytochrome C, increased protein expression of cytosolic cytochrome C, cleaved caspase-9, cleaved caspase-3 and bax, and increased TUNEL-positive cell numbers, which indicated that SCI could induce cell apoptosis. Fortunately, the lycopene treatment significantly ameliorated oxidative damage, mitochondrial dysfunction and cell apoptosis via the reversion of those parameters described above in the dose of lycopene of 10 and 20mg/kg. In addition, lycopene significantly ameliorated the hind limb motor disturbances in the SCI+lyco10 group and the SCI+lyco20 group compared with the SCI group. These results suggested that lycopene administration could improve total antioxidant status and might have neuroprotective effects on SCI. Copyright © 2017 Elsevier B.V. All rights reserved.
Impact of a Library Instruction Session on Bibliographies of Organic Chemistry Students

ERIC Educational Resources Information Center

Kromer, John

2015-01-01

Students in Chemistry 254: Organic Chemistry for Majors were required to write a paper about an organic name reaction. Before turning in this assignment, students had the option of attending a one-hour library instruction session covering SciFinder, sources for spectra, ACS Style, and print resources about organic name reactions. Twenty-five…
Anti and Androgenic Activities in MDA-KB2 Cells: A Comparison of Performance in 96 Well Versus HTS Assays

EPA Science Inventory

We developed the MDA-kb2 cell line to screen androgen agonists/antagonists (Wilson et al., ToxSci 66:69, 2002). MDA-kb2 has been used to quantify anti- and androgenic activities of chemicals, mixtures, combustion by-products, oil dispersants and waste, source and drinking water s...
Body composition of active persons with spinal cord injury and with poliomyelitis

USDA-ARS?s Scientific Manuscript database

This study sought to evaluate the body composition of subjects with active spinal cord injuries and polio. Two groups of males and females, active, free-living, of similar ages and body mass index (BMI), were distributed according to the source of deficiency: SCI – low spinal cord injury (T5-T12) an...
Effects of Spinal Cord Injury in Heart Rate Variability After Acute and Chronic Exercise: A Systematic Review.

PubMed

Buker, Daniel Bueno; Oyarce, Cristóbal Castillo; Plaza, Raúl Smith

2018-01-01

Background: Spinal cord injury (SCI) above T6 is followed by a loss of sympathetic supraspinal control of the heart, disturbing the autonomic balance and increasing cardiovascular risk. Heart rate variability (HRV) is a widely used tool for assessing the cardiac autonomic nervous system and positive adaptations after regular exercise in able-bodied subjects. However, adaptations in SCI subjects are not well known. Objectives: To compare HRV between able-bodied and SCI subjects and analyze the effects of chronic and acute exercise on HRV in the SCI group. Methods: We searched MEDLINE, Embase, Web of Science, SciELO, and Google Scholar databases to July 2016. We selected English and Spanish observational or experimental studies reporting HRV after training or acute exercise in SCI patients. We also included studies comparing HRV in SCI individuals with able-bodied subjects. Animal studies and nontraumatic SCI studies were excluded. We screened 279 articles by title and abstract; of these, we fully reviewed 29 articles. Eighteen articles fulfilled criteria for inclusion in this study. Results: SCI individuals showed lower HRV values in the low frequency band compared to able-bodied subjects. Regular exercise improved HRV in SCI subjects, however time and intensity data were lacking. HRV decreases after an acute bout of exercise on SCI subjects, but recovery kinetics are unknown. Conclusion: HRV is affected following SCI. Able-bodied subjects and SCI individuals have different values of HRV. Acute bouts of exercise change HRV temporarily, and chronic exercise might improve autonomic balance in SCI.
Overview of the Spinal Cord Injury--Quality of Life (SCI-QOL) measurement system.

PubMed

Tulsky, David S; Kisala, Pamela A; Victorson, David; Tate, Denise G; Heinemann, Allen W; Charlifue, Susan; Kirshblum, Steve C; Fyffe, Denise; Gershon, Richard; Spungen, Ann M; Bombardier, Charles H; Dyson-Hudson, Trevor A; Amtmann, Dagmar; Kalpakjian, Claire Z; Choi, Seung W; Jette, Alan M; Forchheimer, Martin; Cella, David

2015-05-01

The Spinal Cord Injury--Quality of Life (SCI-QOL) measurement system was developed to address the shortage of relevant and psychometrically sound patient reported outcome (PRO) measures available for clinical care and research in spinal cord injury (SCI) rehabilitation. Using a computer adaptive testing (CAT) approach, the SCI-QOL builds on the Patient Reported Outcomes Measurement Information System (PROMIS) and the Quality of Life in Neurological Disorders (Neuro-QOL) initiative. This initial manuscript introduces the background and development of the SCI-QOL measurement system. Greater detail is presented in the additional manuscripts of this special issue. Classical and contemporary test development methodologies were employed. Qualitative input was obtained from individuals with SCI and clinicians through interviews, focus groups, and cognitive debriefing. Item pools were field tested in a multi-site sample (n=877) and calibrated using item response theory methods. Initial reliability and validity testing was performed in a new sample of individuals with traumatic SCI (n=245). Five Model SCI System centers and one Department of Veterans Affairs Medical Center across the United States. Adults with traumatic SCI. n/a n/a The SCI-QOL consists of 19 item banks, including the SCI-Functional Index banks, and 3 fixed-length scales measuring physical, emotional, and social aspects of health-related QOL (HRQOL). The SCI-QOL measurement system consists of psychometrically sound measures for individuals with SCI. The manuscripts in this special issue provide evidence of the reliability and initial validity of this measurement system. The SCI-QOL also links to other measures designed for a general medical population.
Bacterial susceptibility patterns in patients with spinal cord injury and disorder (SCI/D): an opportunity for customized stewardship tools.

PubMed

Suda, K J; Patel, U C; Sabzwari, R; Cao, L; Ramanathan, S; Hill, J N; Evans, C T

2016-11-01

Retrospective observational study of bacterial susceptibilities in Veterans with SCI/D as compared to a general patient population. The purpose of this project was to evaluate the prevalence and susceptibility of bacteria isolated from spinal cord injury and disorder (SCI/D) patients as compared with a general patient population and determine whether a SCI/D-specific antibiogram, a report of bacterial susceptibilities used to guide empiric antibiotic selection, would be a useful stewardship tool. Veterans Affairs Medical Center located in Cook county, IL, USA. Microbiology reports from 1 October 2012 to 30 September 2013 were compiled into a SCI/D-specific antibiogram and compared to a non-SCI/D antibiogram. Persons with positive cultures and SCI/D were younger and had a higher Charlson Index as compared to non-SCI/D patients (P<0.0001 for both). Five thousand one hundred and thirty-one unique isolate cultures were evaluated (SCI/D=23.0%). Frequencies of pathogens isolated in SCI/D and non-SCI/D differed. Methicillin-resistant Staphylococcus aureus occurred more frequently in SCI/D (27.8% vs 55.4%; P<0.0001). Gram-negatives had generally lower susceptibilities in SCI/D and a higher frequency of organisms producing extended-spectrum Beta-lactamases (17.6% vs 5.0%; P<0.0001), carbapenem-resistant Enterobacteriaceae (2.4% vs 0.5%; P<0.0001), carbapenem resistance (7.6% vs 2.4%; P<0.0001) and isolates resistant to ⩾3 antibiotic classes (60.7% vs 28.0%; P=0.0001). Different pathogens with poorer susceptibilities are isolated in SCI/D. Thus an SCI/D-specific antibiogram reflective of resistance patterns in these patients may increase the appropriateness of empiric antibiotic selection. The frequency of multi-drug resistant organisms in cultures obtained from patients with SCI/D is worrisome.
Tracking functional status across the spinal cord injury lifespan: linking pediatric and adult patient-reported outcome scores.

PubMed

Tian, Feng; Ni, Pengsheng; Mulcahey, M J; Hambleton, Ronald K; Tulsky, David; Haley, Stephen M; Jette, Alan M

2014-11-01

To use item response theory (IRT) methods to link scores from 2 recently developed contemporary functional outcome measures, the adult Spinal Cord Injury-Functional Index (SCI-FI) and the Pedi SCI (both the parent version and the child version). Secondary data analysis of the physical functioning items of the adult SCI-FI and the Pedi SCI instruments. We used a nonequivalent group design with items common to both instruments and the Stocking-Lord method for the linking. Linking was conducted so that the adult SCI-FI and Pedi SCI scaled scores could be compared. Community. This study included a total sample of 1558 participants. Pedi SCI items were administered to a sample of children (n=381) with SCI aged 8 to 21 years, and of parents/caregivers (n=322) of children with SCI aged 4 to 21 years. Adult SCI-FI items were administered to a sample of adults (n=855) with SCI aged 18 to 92 years. Not applicable. Five scales common to both instruments were included in the analysis: Wheelchair, Daily Routine/Self-care, Daily Routine/Fine Motor, Ambulation, and General Mobility functioning. Confirmatory factor analysis and exploratory factor analysis results indicated that the 5 scales are unidimensional. A graded response model was used to calibrate the items. Misfitting items were identified and removed from the item banks. Items that function differently between the adult and child samples (ie, exhibit differential item functioning) were identified and removed from the common items used for linking. Domain scores from the Pedi SCI instruments were transformed onto the adult SCI-FI metric. This IRT linking allowed estimation of adult SCI-FI scale scores based on Pedi SCI scale scores and vice versa; therefore, it provides clinicians with a means of tracking long-term functional data for children with an SCI across their entire lifespan. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)

NEALSON, KENNETH H.

This project had as its goals the understanding of the ecophysiology of the genus Shewanella using various genomics approaches. As opposed to other programs involving Shewanella, this one branched out into the various areas in which Shewanella cells are active, and included both basic and applied studies. All of the work was, to some extent, related to the ability of the bacteria to accomplish electron exchange between the cell and solid state electron acceptors and/or electron donors, a process we call Extracellular Electron Transport, or EET. The major accomplishments related to several different areas: Basic Science Studies: 1. Genetics andmore » genomics of nitrate reduction, resulting in elucidation of atypical nitrate reduction systems in Shewanella oneidensis (MR-1)[2]. 2. Influence of bacterial strain and growth conditions on iron reduction, showing that rates of reduction, extents of reduction, and the formation of secondary minerals were different for different strains of Shewanella [3,4,9]. 3. Comparative genomics as a tool for comparing metabolic capacities of different Shewanella strains, and for predicting growth and metabolism [6,10,15]. In these studies, collaboration with ORNL, PNNL, and 4. Basic studies of electron transport in strain MR-1, both to poised electrodes, and via conductive nanowires [12,13]. This included the first accurate measurements of electrical energy generation by a single cell during electrode growth [12], and the demonstration of electrical conductivity along the length of bacterial nanowires [13]. 5. Impact of surface charge and electron flow on cell movement, cell attachment, cell growth, and biofilm formation [7.18]. The demonstration that interaction with solid state electron acceptors resulted in increased motility [7] led to the description of a phenomenon called electrokinesis. The importance of this for biofilm formation and for electron flow was hypothesized by Nealson & Finkel [18], and is now under study in several laboratories. Applications: 1. Corrosion: Electron flow is often part of the corrosive process, and several studies were done in concert with this proposal with regard to the ability of EET-capable bacteria to enhance, inhibit, or detect corrosion. These included using EET-capable bacteria to detect corrosion in its earliest stages [5], to use corrosion-causing bacteria for the study of the microbe/mineral interface during corrosion [1], and to study the groups of microbes involved with corrosion of natural systems [19]. 2. Bioenergy and microbial fuel cells: The production of electricity by Shewanella was shown early in this program (several years ago) to be dependent on the genes for extracellular electron transport (EET), and applied work involved the testing of various strains and conditions for the optimization of current production by the shewanellae [11,14,16]. 3. Identification of shewanellae strains: Based on similarities seen in genomic comparisons, a rapid method was employed for distinguishing between shewanellae strains [17]. Interactions with other laboratories: This grant was an extension of a grant involving the so-called ?Shewanella Federation?, and as such, a number of our publications were joint with other members of this group. The groups included: 1. Pacific Northwest Laboratories ? 2. Oak Ridge National Labs 3. Michigan State University 4. University of Oklahoma 5. Naval Research Laboratory, Washington DC 6. Burnham Medical Research Institute, San Diego 7. J. Craig Venter Institute, San Diego Education: Graduate Students: Michael Waters, Ph.D. ? at NIST, Washington D.C. Lewis Hsu, Ph.D. ? at NRL, San Diego Howard Harris, Ph.D. ? Postdoc at University, France Everett Salas, Ph.D. ? Scientist at Chevron McLean, Jeffrey, Ph.D. ? Scientist at J. Craig Venter Institute McCrow, John, Ph.D. ? Scientist at J. Craig Venter Institute Postdocs: Mohamed El-Naggar ? Professor of Physics, USC Jinjun Kan ? Senior Researcher at Undergraduatges: During this year, we had three undergraduate researchers in the lab, each working on an aspect of this work, and each involved with an undergraduate honors research project. Publications produced as a result of this funding. 1. Waters, M.S., M.Y. El-Naggar, L. Hsu, C.A. Sturm, A. Luttge, F.E. Udwadia, D.G. Cvitkovitch, S.D. Goodman, and K.H. Nealson. 2009. Simultaneous interferometric measurement of corrosive or demineralizing bacteria and their mineral interfaces. Appl. Environ. Microbiol. 75:1445-1449. 2. Gao, H., Z.K. Yang, S. Barua, S. B. Reed, M.F. Romine, K.H. Nealson, J.K. Fredrickson, J.M. Tiedje, and J. Zhou. 2009. Reduction of nitrate in Shewanella oneidensis depends on atypical NAP and NRF systems with NapB as a preferred electron transport protein from CymA to NapA. The ISME J. 3:966-976. 3. Salas, E.C., W.M. Berelson, D.E. Hammond, A.R. Kampf and K. H. Nealson. 2009. The impact of bacterial strain on the products of dissimilatory iron reduction. Geochim. Cosmochim. Acta. (in press: doi: 10.1016/j.gca.2009.10.039) 4. Salas, E.C., W.M. Berelson, D.E. Hammond, A.R. Kampf, and K. H. Nealson. 2009. The influence of carbon source on the products of dissimilatory iron reduction. Geomicrobiol. J. 26:451-462 [7,18]. 5. Waters, M.S., E.C. Salas, S.D. Goodman, F.E. Udwadia, and K.H. Nealson. 2009. Early detection of oxidized surfaces using Shewanella oneidensis MR-1 as a tool. Biofouling. 25:163-172. 6. Konstantinidis, K., et al. 2009. Comparative systems biology across an evolutionary gradient within the Shewanella genus. Proc. Nat. Acad. Sci. USA 106: 15909-15914. 7. Harris, H.W., M.Y. El-Naggar, O. Bretschger, M.J. Ward, M. F. Romine, A.Y. Obraztsova, and K.H. Nealson. 2010. Electrokinesis is a microbial behavior that requires extracellular electron transport. Proc. Nat. Acad. Sci. 107:326-331 8. Nealson, K.H. 2010. Sediment reactions defy dogma. Nature 463:1033-1034. 9. Salas, E.C., W.M. Berelson, D.E. Hammond, A.R. Kampf, and K.H. Nealson. 2010. The impact of bacterial strain on the products of dissimilatory iron reduction. Geochim. Cosmochim. Acta. 74:574-583. 10. Karpinets, T.V., A.Y Obraztsova, Y. Wang, D.D. Schmoyer, G.H. Kora, B.H. Park, M.H. Serres, M.F. Ropmine, M.L. Land, T.B. Kothe, J.K. Fredrickson, K.H. Nealson, and E.C. Uberbacher 2010. Conserved synteny at the protein family level reveals genes underlying Shewanella species? cold tolerance and predicts their novel phenotypes. Funct. Integr. Genomics 10: 97 ? 110. (DOI 10.1007/s10143-009-0142-y) 11. Bretschger, O., A.C.M. Cheung, F. Mansfeld, and K.H. Nealson. 2010. Comparative microbial fuel cell evaluations of Shewanella spp. Electroanalysis 22: 883-894. 12. McLean, J.S., G. Wanger, Y.A. Gorby, M. Wainstein, J. McQuaid, Shun?ichi Ishii, O. Bretschger, H. Beyanal, K.H. Nealson. 2010. Quantification of electron transfer rates to a solid phase electron acceptor through the stages of biofilm formation from single cells to multicellular communities. Env. Sci. Technol. 44:2721-2717. 13. El-Naggar, M., G. Wanger, K.M. Leung, T.D. Yuzvinsky, G. Southam, J. Yang, W.M. Lau, K.H. Nealson, and Y.A. Gorby. 2010. Electrical Transport Along Bacterial Nanowires from Shewanella oneidensis MR-1 Proc. Nat. Acad. Sci. USA 107:18127-18131. 14. Biffinger, J.C., L.A. Fitzgerald, R. Ray, B.J. Little, S.E. Lizewski, E.R. Petersen, B.R. Ringeisen, W.C. Sanders, P.E. Sheehan, J.J. Pietron, J.W. Baldwin, L.J. Nadeau, G.R. Johnson, M. Ribbens, S.E. Finkel, K.H. Nealson. 2010. The utility of Shewanella japonica for microbial fuel cells. Bioresource Technol. 102:290-297. 15. Rodionov, D. , C. Yang, X. Li, I. Rodionova, Y. Wang, A.Y. Obraztsova, O. P. Zagnitko, R. Overbeek, M. F. Romine, S. Reed, J.K. Fredrickson, K.H. Nealson, A.L. Osterman. 2010. Genomic encyclopedia of sugar utilization pathways in the Shewanella genus. BMC Genomics 2010, 11:494 16. Kan, J., L. Hsu, A.C.M. Cheung, M. Pirbazari, and K.H. Nealson. 2011. Current production by bacterial communities in microbial fuel cells enriched from wastewater sludge with different electron donors. Env. Sci. Technol. 45: 1139-1146. 17. Kan, J. B. Flood, J.P. McCrow, J.S. Kim, L. Tan, and K.H. Nealson. 2011. A rapid fingerprinting approach to distinguish between closely related strains of Shewanella. J. Microbiol. Methods. 86: 62-68. 18. Nealson, K.H. and S.E. Finkel. 2011. Electron flow and biofilms. MRS Bull. 36:380-384. 19. Kan, J., P. Chellamuthu, A. Obraztsova, J.E. Moore, and K.H. Nealson. 2011. Diverse bacterial groups are associated with corrosive lesions at a Granite Mountain Record Vault (GMRV). J. Appl. Microbiol. 111: 329-337. Patents and Inventions: No patents or inventions were created during this funded work.« less
Update on critical care for acute spinal cord injury in the setting of polytrauma.

PubMed

Yue, John K; Winkler, Ethan A; Rick, Jonathan W; Deng, Hansen; Partow, Carlene P; Upadhyayula, Pavan S; Birk, Harjus S; Chan, Andrew K; Dhall, Sanjay S

2017-11-01

Traumatic spinal cord injury (SCI) often occurs in patients with concurrent traumatic injuries in other body systems. These patients with polytrauma pose unique challenges to clinicians. The current review evaluates existing guidelines and updates the evidence for prehospital transport, immobilization, initial resuscitation, critical care, hemodynamic stability, diagnostic imaging, surgical techniques, and timing appropriate for the patient with SCI who has multisystem trauma. Initial management should be systematic, with focus on spinal immobilization, timely transport, and optimizing perfusion to the spinal cord. There is general evidence for the maintenance of mean arterial pressure of > 85 mm Hg during immediate and acute care to optimize neurological outcome; however, the selection of vasopressor type and duration should be judicious, with considerations for level of injury and risks of increased cardiogenic complications in the elderly. Level II recommendations exist for early decompression, and additional time points of neurological assessment within the first 24 hours and during acute care are warranted to determine the temporality of benefits attributable to early surgery. Venous thromboembolism prophylaxis using low-molecular-weight heparin is recommended by current guidelines for SCI. For these patients, titration of tidal volumes is important to balance the association of earlier weaning off the ventilator, with its risk of atelectasis, against the risk for lung damage from mechanical overinflation that can occur with prolonged ventilation. Careful evaluation of infection risk is a priority following multisystem trauma for patients with relative immunosuppression or compromise. Although patients with polytrauma may experience longer rehabilitation courses, long-term neurological recovery is generally comparable to that in patients with isolated SCI after controlling for demographics. Bowel and bladder disorders are common following SCI, significantly reduce quality of life, and constitute a focus of targeted therapies. Emerging biomarkers including glial fibrillary acidic protein, S100β, and microRNAs for traumatic SCIs are presented. Systematic management approaches to minimize sources of secondary injury are discussed, and areas requiring further research, implementation, and validation are identified.
In-situ single particle composition analysis of free tropospheric ice nuclei and ice residues in mixed-phase clouds during INUIT-JFJ 2013

NASA Astrophysics Data System (ADS)

Schmidt, Susan; Schneider, Johannes; Thomas, Klimach; Stephan, Mertes; Ludwig, Schenk; Udo, Kästner; Frank, Stratmann; Joachim, Curtius; Piotr, Kupiszewski; Ernest, Weingartner; Emanuel, Hammer; Paul, Vochezer; Martin, Schnaiter; Stephan, Borrmann

2014-05-01

In the framework of the DFG (deutsche Forschungsgemeinschaft)-funded research unit INUIT (Ice Nuclei research UnIT) a field campaign at the High Alpine Research Station Jungfraujoch (JFJ, Swiss Alps, Sphinx Laboratory, 3580 m asl; 7°59'2''E, 46°32'53''N) took place in January/February 2013 (INUIT-JFJ 2013). The goal of the measurements was to investigate the chemical composition of ice particle residues (IPR) in ambient air as well as the background aerosol particles. Previous investigations conducted at the JFJ showed that particles consisting of mineral components dominate the ice particle residue number (Kamphus et al., 2008) but also particles consisting of black carbon were found to be enriched in IPR (Mertes et al., 2007; Cozic et al., 2008). Cziczo et al. find out that lead as well is a good ice nucleus and was measured in IPR at previous measurements at the JFJ. During INUIT-JFJ 2013, the IPR were sampled out of mixed-phase clouds by an Ice-CVI (Ice Counterflow Virtual Impactor, Mertes et al., 2007) and an ISI (Ice Selective Inlet, Kupiszewski et al., 2013) and analyzed by the single particle mass spectrometer ALABAMA (Aircraft-based Laser Ablation Aerosol Mass Spectrometer; Brands et al., 2011). Additionally, the ALABAMA was connected to a total aerosol-inlet to investigate the chemical composition of background aerosol particles. During 217 hours of background aerosol measurements we analyzed more than 27000 aerosol particles, which consisted mainly of pure organic components or organics mixed with ammonium, metals or mineral components. During six cloud events with approximately 63 h measurement time we detected 162 IPR sampled by the Ice-CVI. The main part of these IPR were also composed of organic material mixed with other chemical compounds. Additionally, we found particles which consisted of mineral components (approximately 23 %). Sampling mixed-phase cloud through the ISI we measured during four cloud events 34 ice residues in approximately 30 h measurement time. The main part of the chemical compounds of these IPR were also organic material mixed with metals or with mineral compounds. We also found a smaller part of particles which consisted of pure mineral components (about 48 %). Lead was also found in the IPR measured behind Ice-CVI (~14 %) as well as in the background aerosol (~0.04 %). Black carbon particles were only found in the background aerosol. Because of the topography of the JFJ, air masses can reach the station only from the northwestern or southeastern direction (Hammer et al., 2013). Back trajectory calculations show that during our measurements the air masses were dominated mainly by long-distance transport from North America over Great Britain and France. This may explain the lower abundance of mineral dust in the ice residues compared to the previous studies. Brands, M., Kamphus, M., Böttger, T., Schneider, J., Drewnick, F., Roth, A., Curtius, J., Voigt, C., Borbon, A., Beekmann, M., Bourdon, A., Perrin, T. and Borrmann, S. (2011) Aerosol Sci. Technol., 45, 46-64. Cozic, J., Mertes, S., Verheggen, B., Cziczo, D. J., Gallavardin, S. J., Walter, S., Baltensperger, U. and Weingartner, E. (2008) J. Geophys. Res.-Atmos., 113, D15209. Cziczo, D. J., Stetzer. O., Worringen, A., Ebert, M., Weinbruch, S., Kamphus, M., Gallavardin, S. J., Curtius, J., Borrmann, S., Froyd, K. D., Mertes, S., Möhler, O., Lohmann, U. (2009) Nature Geoscience, 2, 333-336 Hammer, E., Bukowiecki, N., Gysel, M., Jurányi, Z., Hoyle, C. R., Vogt, R., Baltensperger, U. and Weingartner, E. (2013) Atmos. Chem. Phys. Discuss., 13, 20419-20462 Kamphus, M., Ettner-Mahl, M., Klimach, T., Drewnick, F, Keller, L., Cziczo, D. J., Mertes, S., Borrmann, S. and Curtius1, J. (2010) Atmos. Chem. Phys., 10, 8077-8095. Kupiszewski, P., Weingartner, E., Färber, R., Gysel, M., Hammer, E., Fuchs, C., Baltensperger, U., Vochezer, P., Schnaiter, M., Linke, C., Toprak, E., Mertes, S., Schneider, J., Schmidt, S. (2013) European Aerosol Conference, Prague. Mertes, S., Verheggen, B., Walter,S., Connolly,P., Ebert, M., Schneider, J., Bower, K. N., Cozic, J., Weinbruch, S., Baltensperger, U. and Weingartner, E. (2007) Aerosol Sci. Technol., 41, 848-864.
Comparison Between Elemental Carbon Measured Using Thermal-Optical Analysis and Black Carbon Measurements Using A Novel Cellphone-Based System

NASA Astrophysics Data System (ADS)

Ramanathan, N.; Khan, B.; Leong, I.; Lukac, M.

2011-12-01

Black carbon (BC) is produced through the incomplete combustion of fossil and solid fuels. Current BC emissions inventories have large uncertainties of factors of 2 or more due to sparse measurements and because BC is often emitted by local sources that vary over time and space (Bond et al, 2004). Those uncertainties are major sources of error in air pollution models. Emissions from a variety of improved cookstove/fuel/combustion conditions were collected on pre-conditioned 47 mm quartz-fiber filters and analyzed for organic carbon (OC) and elemental carbon (EC) using thermal-optical analysis (TOA). The samples were then analyzed for BC concentration by using cellphone-based instrumentation developed by Ramanathan et al., 2011. The cellphone-based monitoring system (CBMS) is a wireless, low-cost, low-power system that monitors BC emissions. The CBMS is comprised of an aerosol filter sampler containing a battery-powered air pump and a 25mm filter holder that draws air in through a quartz-fiber filter. As black carbon deposits increase, the filter darkens--the darkest color representing the highest loading. A cellphone photograph of the filter with the black carbon deposit is taken and relayed to an analytics unit for comparison to a reference scale to estimate airborne BC concentration. The BC concentration can then be compared to the thermally derived EC concentration. TOA was conducted on a Sunset Laboratory Dual Optics Carbon Analyzer using a modified version of the Birch and Cary (1996) NIOSH 5040 protocol. The dual-optical instrument permitted simultaneous monitoring of the transmission (TOT) and reflectance (TOR). 619 samples were collected; EC was obtained using NIOSH TOT and NIOSH TOR methods, and BC was obtained using the CBMS analytics unit. The mean BC value reported by the CBMS agrees within 20% of the reference values for EC, confirming the findings in Ramanathan et al. (2011) based on samples from India. Given this accuracy, we conclude that the CBMS provides an affordable real-time method for gathering BC data on a mass scale. The CBMS' scalability should enable dense deployments near emissions sources and reduce uncertainty in emissions inventories due to undersampling. Bond, T. C., E. Bhardwaj, R. Dong, R. Jogani, S. Jung, C. Roden, D. G. Streets, and N. M. Trautmann (2007), Historical emissions of black and organic carbon aerosol from energy-related combustion, 1850-2000, Global Biogeochem. Cycles, 21, GB2018, doi:10.1029/2006GB002840. Birch, M. E. and R.A. Cary (1996), Elemental Carbon-Based Method for Monitoring Occupational Exposures to Particulate Diesel Exhaust. Aerosol Sci. Technol., 25, 221-241. NIOSH (1996). Elemental carbon (diesel particulate) method 5040. NIOSH Manual of Analytical Methods, 4th ed. National Institute for Occupational Safety and Health, Cincinnati, Ohio (1st Suppl.). Ramanathan, N., M. Lukac, T. Ahmed, A. Kar, P.S. Praveen, T. Honles, I. Leong, I.H. Rehman, J.J. Schauer, V. Ramanathan (2011), A cellphone based system for large-scale monitoring of black carbon, Atmos. Environ., 45 (26), 4481-4487.
Secondary health conditions and spinal cord injury: an uphill battle in the journey of care.

PubMed

Guilcher, Sara J T; Craven, B Cathy; Lemieux-Charles, Louise; Casciaro, Tiziana; McColl, Mary Ann; Jaglal, Susan B

2013-06-01

To understand the journey of care in the prevention and management of secondary health conditions (SHCs) following spinal cord injury (SCI). This was a case study design with 'Ontario' as the case. The Network Episode Model was used as the conceptual framework. Data sources included in depth interviews with persons with SCI, care providers, and policy and decision makers. Document analysis was also conducted on relevant materials and policies. Key informants were selected by purposeful sampling as well as snowball sampling to provide maximum variation. Data analysis was an iterative process and involved descriptive and interpretive analyses. A coding structure was developed based on the conceptual framework which allowed for free nodes when emerging ideas or themes were identified. Twenty-eight individuals were interviewed (14 persons with SCI and 14 persons representing care providers, community advocacy organization representatives, system service delivery administrators and policy-makers). A major over-arching domain that emerged from the data was the concept of 'fighting'. Eleven themes were identified: at the micro-individual level: (i) social isolation and system abandonment, (ii) funding and equitable care, (iii) bounded freedom and self-management; at the meso care provider level: (iv) gender and caregiving strain, (v) help versus disempowerment, (vi) holistic care-thinking outside the box, (vii) poor communication and coordination of care; and at the macro health system level: (viii) fight for access and availability, (ix) models of care tensions, (x) private versus public tensions and (xi) rigid rules and policies. Findings suggest that the journey is challenging and a persistent uphill struggle for persons with SCI, care providers, and community-based advocates. If we are to make significant gains in minimizing the incidence and severity of SHCs, we need to tailor efforts at the health system level. • Secondary health conditions are problematic for individuals with a spinal cord injury (SCI). • This study aimed to understand the journey of care in the prevention and management of secondary health conditions (SHCs) following SCI. • Findings suggest that the journey is challenging and a persistent uphill struggle for persons with SCI, care providers, and community-based advocates. • All stakeholders involved recognized the disparities in access to care and resources that exist within the system. We recommend that if we are to make significant gains in minimizing the incidence and severity of SHCs, we need to tailor efforts at the health system level.
Lipid Peroxidation and Its Role in the Expression of NLRP1a and NLRP3 Genes in Testicular Tissue of Male Rats: a Model of Spinal Cord Injury

PubMed

Bazrafkan, Mahshid; Nikmehr, Banafsheh; Shahverdi, Abdolhossein; Hosseini, Seyed Reza; Hassani, Fatemeh; Poorhassan, Mahnaz; Mokhtari, Tahmineh; Abolhassani, Farid; Choobineh, Hamid; Beyer, Cordian; Hassanzadeh, Gholamreza

2017-10-16

The majority of male patients with spinal cord injury (SCI) suffer from infertility. Nucleotide-binding oligomerization domain-like receptors NOD-like receptors (NLRs) are a kind of receptors that corporate in the inflammasome complex. Recent studies have introduced the inflammasome as the responsible agent for secreting cytokines in semen. Reactive oxygen species (ROS) is one of the elements that trigger inflammasome activation. Genital infections in SCI can lead to ROS generation. We investigated the relation between lipid peroxidation and inflammasome complex activity in testicular tissue of SCI rats. Adult male rats (n=20), weighting 200-250 g, were included and divided into four groups: three experimental groups, including SCI1, SCI3, and SCI7, i.e. the rats were subjected to SCI procedure and sacrificed after one, three, and seven days, respectively and a control group. We performed a moderate, midline spinal contusion injury at thoracic level 10. The animals were anesthetized, and testes were collected for measurement of gene expression by real-time PCR. Caudal parts of epididymis were collected for malondialdehyde (MDA) measurement. No NLRP1a mRNA over expression was seen in the testes of control and SCI groups. After seven days from SCI surgery, NLRP3 mRNA expression was significantly increased in SCI7 animals (P≤0.05). There was a significant difference in MDA level in SCI7 versus control group, as well as SCI1 and SCI3 animals (P≤0.05). NLRP3 overexpression occurs due to the increased ROS production in testicular tissue of SCI rats.
Lipid Peroxidation and Its Role in the Expression of NLRP1a and NLRP3 Genes in Testicular Tissue of Male Rats: A Model of Spinal Cord Injury

PubMed Central

Bazrafkan, Mahshid; Nikmehr, Banafsheh; Shahverdi, Abdolhossein; Hosseini, Seyed Reza; Hassani, Fatemeh; Poorhassan, Mahnaz; Mokhtari, Tahmineh; Abolhassani, Farid; Choobineh, Hamid; Beyer, Cordian; Hassanzadeh, Gholamreza

2018-01-01

Background: The majority of male patients with spinal cord injury (SCI) suffer from infertility. Nucleotide-binding oligomerization domain-like receptors NOD-like receptors (NLRs) are a kind of receptors that corporate in the inflammasome complex. Recent studies have introduced the inflammasome as the responsible agent for secreting cytokines in semen. Reactive oxygen species (ROS) is one of the elements that trigger inflammasome activation. Genital infections in SCI can lead to ROS generation. We investigated the relation between lipid peroxidation and inflammasome complex activity in testicular tissue of SCI rats. Methods: Adult male rats (n=20), weighting 200-250 g, were included and divided into four groups: three experimental groups, including SCI1, SCI3, and SCI7, i.e. the rats were subjected to SCI procedure and sacrificed after one, three, and seven days, respectively and a control group. We performed a moderate, midline spinal contusion injury at thoracic level 10. The animals were anesthetized, and testes were collected for measurement of gene expression by real-time PCR. Caudal parts of epididymis were collected for malondialdehyde (MDA) measurement. Results: No NLRP1a mRNA overexpression was seen in the testes of control and SCI groups. After seven days from SCI surgery, NLRP3 mRNA expression was significantly increased in SCI7 animals (p ≤ 0.05). There was a significant difference in MDA level in SCI7 versus control group, as well as SCI1 and SCI3 animals (p ≤ 0.05). Conclusion: NLRP3 overexpression occurs due to the increased ROS production in testis tissue of SCI rats
Overview of the Spinal Cord Injury – Quality of Life (SCI-QOL) measurement system

PubMed Central

Tulsky, David S.; Kisala, Pamela A.; Victorson, David; Tate, Denise G.; Heinemann, Allen W.; Charlifue, Susan; Kirshblum, Steve C.; Fyffe, Denise; Gershon, Richard; Spungen, Ann M.; Bombardier, Charles H.; Dyson-Hudson, Trevor A.; Amtmann, Dagmar; Z. Kalpakjian, Claire; W. Choi, Seung; Jette, Alan M.; Forchheimer, Martin; Cella, David

2015-01-01

Context/Objective The Spinal Cord Injury – Quality of Life (SCI-QOL) measurement system was developed to address the shortage of relevant and psychometrically sound patient reported outcome (PRO) measures available for clinical care and research in spinal cord injury (SCI) rehabilitation. Using a computer adaptive testing (CAT) approach, the SCI-QOL builds on the Patient Reported Outcomes Measurement Information System (PROMIS) and the Quality of Life in Neurological Disorders (Neuro-QOL) initiative. This initial manuscript introduces the background and development of the SCI-QOL measurement system. Greater detail is presented in the additional manuscripts of this special issue. Design Classical and contemporary test development methodologies were employed. Qualitative input was obtained from individuals with SCI and clinicians through interviews, focus groups, and cognitive debriefing. Item pools were field tested in a multi-site sample (n = 877) and calibrated using item response theory methods. Initial reliability and validity testing was performed in a new sample of individuals with traumatic SCI (n = 245). Setting Five Model SCI System centers and one Department of Veterans Affairs Medical Center across the United States. Participants Adults with traumatic SCI. Interventions n/a Outcome Measures n/a Results The SCI-QOL consists of 19 item banks, including the SCI-Functional Index banks, and 3 fixed-length scales measuring physical, emotional, and social aspects of health-related QOL (HRQOL). Conclusion The SCI-QOL measurement system consists of psychometrically sound measures for individuals with SCI. The manuscripts in this special issue provide evidence of the reliability and initial validity of this measurement system. The SCI-QOL also links to other measures designed for a general medical population. PMID:26010962
Physiotherapy Secretion Removal Techniques in People With Spinal Cord Injury: A Systematic Review

PubMed Central

Reid, W. Darlene; Brown, Jennifer A; Konnyu, Kristin J; Rurak, Jennifer M.E; Sakakibara, Brodie M

2010-01-01

Objective: To address whether secretion removal techniques increase airway clearance in people with chronic spinal cord injury (SCI). Data Sources and Study Selection: MEDLINE/PubMed, CINAHL, EMBASE, and PsycINFO were searched from inception to May 2009 for population keywords (spinal cord injury, paraplegia, tetraplegia, quadriplegia) paired with secretion removal–related interventions and outcomes. Inclusion criteria for articles were a research study, irrespective of design, that examined secretion removal in people with chronic SCI published in English. Review Methods: Two reviewers determined whether articles met the inclusion criteria, abstracted information, and performed a quality assessment using PEDro or Downs and Black criteria. Studies were then given a level of evidence based on a modified Sackett scale. Results: Of 2,416 abstracts and titles retrieved, 24 met the inclusion criteria. Subjects were young (mean, 31 years) and 84% were male. Most evidence was level 4 or 5 and only 2 studies were randomized controlled trials. Three reports described outcomes for secretion removal techniques in addition to cough, whereas most articles examined the immediate effects of various components of cough. Studies examining insufflation combined with manual assisted cough provided the most consistent, high-level evidence. Compelling recent evidence supports the use of respiratory muscle training or electrical stimulation of the expiratory muscles to facilitate airway clearance in people with SCI. Conclusion: Evidence supporting the use of secretion removal techniques in SCI, while positive, is limited and mostly of low level. Treatments that increase respiratory muscle force show promise as effective airway clearance techniques. PMID:21061895
Investigating "The Coolest School in America": How Technology Is Used in a Learner-Centered School

ERIC Educational Resources Information Center

Aslan, Sinem; Reigeluth, Charles M.

2016-01-01

Reigeluth et al. ("Educ Technol" 48(6):32-39, 2008) proposed major and secondary functions for educational technology systems for the learner-centered paradigm of education. However, the functions proposed should be formatively evaluated and revised using a variety of cases to develop a better understanding of how technology can support…
Bacterial Degradation of Nitrogenous Energetic Compounds (NEC) in Coastal Waters and Sediments

DTIC Science & Technology

2008-09-10

2006) Enzymatic immobilization of 2,4,6-trinitrotoluene (TNT) biodegradation products onto model humic substances. Enzyme Microbial Technol 39:1197...11 2.3 Heterotrophic bacterial production ...collected May 2006: A) Average (AVG) rates of TNT incorporation and bacterial production (μg C L-1 d-1); and, B) TNT incorporation normalized for

Compact, High Power, Multi-Spectral Mid-Infrared Semiconductor Laser Package

DTIC Science & Technology

2001-10-01

depositions to map out effects due to stress in the films. Stress in the film will result in the substrate curvature. This curvature results in the...Lasers at 4.5 µm”, IEEE Photon. Technol. Lett., vol. 9, pp. 1573-1575, (1997). 58 18. A. N. Baranov, N. Bertru, Y. Cuminal , G. Boissier, C. Alibert, and
Three Dimensionally Interconnected Silicon Nanomembranes for Optical Phased Array (OPA) and Optical True Time Delay (TTD) Applications

DTIC Science & Technology

2012-06-01

Nanophotonic Waveguides," J. Lightwave Technol. 25 (1), 151-156 (2007). [7-4] Yongbo Tang, Zhechao Wang, Lech Wosinski, Urban Westergren, and Sailing...Waveguides," Photonics Journal, IEEE 3 (2), 203-208 (2011). [8-25] Zhechao Wang, Ning Zhu, Yongbo Tang, Lech Wosinski, Daoxin Dai, and Sailing He
Evaluation of Magnetostrictive Shunt Damper Performance Using Iron (Fe)-Gallium (Ga) Alloy

DTIC Science & Technology

2013-09-01

Technol. 2003, 11 (4), 482– 494 3. Manning, K. V.; Watanabe, K.; Drake, A. E.; Wright, A. Eddy Current. in AccessScience , ©McGraw-Hill Education...2012, http://www.accessscience.com. 4. Manning, K. V. Lenz’s Law in AccessScience , ©McGraw-Hill Education, 2012, http://www.accessscience.com 5
High Temperature Bonding Techniques for Solar Cell Array

DTIC Science & Technology

1977-11-01

Kedaya, E. , Kawakami, J. K., Kopf, P. W. , Kwiatkowski, G. T., McNeil, D. W. , and Tulis , R. W., "Union Carbide Rept. " UCRI-735 (30 July 1973...6. Peters, E. N., Kedaya, E., Kawakami, J. K. , Kwiatkowski, G. T. , McNeil, D. W., and Tulis , R. W., Rubber Chem. and Technol. 48 (1), 14-18 (1975
Study of the genetic diversity of the aflatoxin biosynthesis cluster in Aspergillus section Flavi using insertion/deletion markers in peanut seeds from Georgia, USA

USDA-ARS?s Scientific Manuscript database

Aflatoxins are among the most powerful carcinogens in nature. The major aflatoxin-producing fungi are Aspergillus flavus and A. parasiticus. Numerous crops, including peanut, are susceptible to aflatoxin contamination by these fungi. There has been an increased use of RNA interference (RNAi) technol...
Circulating sclerostin is elevated in short-term and reduced in long-term SCI

PubMed Central

Battaglino, Ricardo A.; Sudhakar, Supreetha; Lazzari, Antonio; Garshick, Eric; Zafonte, Ross; Morse, Leslie R.

2012-01-01

Spinal cord injury (SCI) causes profound bone loss due to muscle paralysis resulting in the inability to walk. Sclerostin, a Wnt signaling pathway antagonist produced by osteocytes, is a potent inhibitor of bone formation. Short-term studies in rodent models have demonstrated increased sclerostin in response to mechanical unloading that is reversed with reloading. Although sclerostin inhibition has been proposed as a potential therapy for bone loss, it is not known if sclerostin levels vary with duration of SCI in humans. We analyzed circulating sclerostin in 155 men with varying degrees of SCI who were 1 year or more post-injury. We report that sclerostin levels are greatest in subjects with short-term SCI (≤ 5 years post-injury) and decrease significantly over the first 5 years post-injury. There was no association between sclerostin and injury duration in subjects with long-term SCI (> 5 years post-injury). In subjects with long-term SCI, sclerostin levels were positively associated with lower extremity bone density and bone mineral content. These data suggest that sclerostin levels in SCI are initially increased after SCI in response to mechanical unloading. This response is time-limited and as bone loss progresses, circulating sclerostin is lowest in subjects with severe osteoporosis. These findings support a dual role for sclerostin after SCI: a therapeutic target in acute SCI, and a biomarker of osteoporosis severity in chronic SCI. PMID:22575440
Learning by Creating and Exchanging Objects: The SCY Experience

ERIC Educational Resources Information Center

De Jong, Ton; Van Joolingen, Wouter R.; Giemza, Adam; Girault, Isabelle; Hoppe, Ulrich; Kindermann, Jorg; Kluge, Anders; Lazonder, Ard W.; Vold, Vibeke; Weinberger, Armin; Weinbrenner, Stefan; Wichmann, Astrid; Anjewierden, Anjo; Bodin, Marjolaine; Bollen, Lars; D'Ham, Cedric; Dolonen, Jan; Engler, Jan; Geraedts, Caspar; Grosskreutz, Henrik; Hovardas, Tasos; Julien, Rachel; Lechner, Judith; Ludvigsen, Sten; Matteman, Yuri; Meistadt, Oyvind; Naess, Bjorge; Ney, Muriel; Pedaste, Margus; Perritano, Anthony; Rinket, Marieke; Von Schlanbusch, Henrik; Sarapuu, Tago; Schulz, Florian; Sikken, Jakob; Slotta, Jim; Toussaint, Jeremy; Verkade, Alex; Wajeman, Claire; Wasson, Barbara; Zacharia, Zacharias C.; Van Der Zanden, Martine

2010-01-01

Science Created by You (SCY) is a project on learning in science and technology domains. SCY uses a pedagogical approach that centres around products, called "emerging learning objects" (ELOs) that are created by students. Students work individually and collaboratively in SCY-Lab (the general SCY learning environment) on "missions" that are guided…
75 FR 24747 - SCI, LLC/Zener-Rectifier Operations Division A Wholly Owned Subsidiary of SCI, LLC/ON...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-05

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-70,235] SCI, LLC/Zener-Rectifier... Adjustment Assistance on October 19, 2009, applicable to workers of SCI LLC/Zener-Rectifier, Operations... Technical Resources were employed on-site at the Phoenix Arizona location of SCI LLC/Zener-Rectifier...
Extraordinary Tools for Extraordinary Science: The Impact ofSciDAC on Accelerator Science&Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryne, Robert D.

2006-08-10

Particle accelerators are among the most complex and versatile instruments of scientific exploration. They have enabled remarkable scientific discoveries and important technological advances that span all programs within the DOE Office of Science (DOE/SC). The importance of accelerators to the DOE/SC mission is evident from an examination of the DOE document, ''Facilities for the Future of Science: A Twenty-Year Outlook''. Of the 28 facilities listed, 13 involve accelerators. Thanks to SciDAC, a powerful suite of parallel simulation tools has been developed that represent a paradigm shift in computational accelerator science. Simulations that used to take weeks or more now takemore » hours, and simulations that were once thought impossible are now performed routinely. These codes have been applied to many important projects of DOE/SC including existing facilities (the Tevatron complex, the Relativistic Heavy Ion Collider), facilities under construction (the Large Hadron Collider, the Spallation Neutron Source, the Linac Coherent Light Source), and to future facilities (the International Linear Collider, the Rare Isotope Accelerator). The new codes have also been used to explore innovative approaches to charged particle acceleration. These approaches, based on the extremely intense fields that can be present in lasers and plasmas, may one day provide a path to the outermost reaches of the energy frontier. Furthermore, they could lead to compact, high-gradient accelerators that would have huge consequences for US science and technology, industry, and medicine. In this talk I will describe the new accelerator modeling capabilities developed under SciDAC, the essential role of multi-disciplinary collaboration with applied mathematicians, computer scientists, and other IT experts in developing these capabilities, and provide examples of how the codes have been used to support DOE/SC accelerator projects.« less
Psychological impact of injuries sustained in motor vehicle crashes: systematic review and meta-analysis

PubMed Central

Tran, Yvonne; Guest, Rebecca; Gopinath, Bamini; Jagnoor, Jagnoor; Bryant, Richard A; Collie, Alex; Tate, Robyn; Kenardy, Justin; Middleton, James W; Cameron, Ian

2016-01-01

Objective The aim of this meta-analysis was to determine the psychological impact associated with motor vehicle crash (MVC)-related physical injuries. Design Systematic review and meta-analysis. Data sources Multiple search engines included MEDLINE (via OVID), PsycINFO and Embase, and studies were sourced from scientific journals, conference papers and doctoral theses. Study selection A high-yield search strategy was employed. Terms like ‘psychological distress’, ‘depression’, ‘PTSD’ and ‘motor vehicle accident’ were employed. These key words were run primarily and secondary searches were then conducted in association with the major injury types. Studies needed to compare psychological distress in people injured in an MVC with uninjured controls who had not recently experienced an MVC. Data extraction Searches resulted in the identification of 2537 articles, and after eliminating duplicates and studies not meeting inclusion criteria, 24 studies were selected involving 4502 injured participants. These studies were entered into separate meta-analyses for mild to moderate traumatic brain injury (mTBI), whiplash-associated disorder (WAD) and spinal cord injury (SCI). Results Elevated psychological distress was associated with MVC-related injuries with a large summary effect size in WAD (0.90), medium to large effect size in SCI (0.69) and small to medium effect size in mTBI (0.23). No studies meeting inclusion criteria were found for burns, fractures and low back injury. Increased psychological distress remains elevated in SCI, mTBI and WAD for at least 3 years post-MVC. Conclusions Rehabilitation strategies are needed to minimise distress subsequent to MVC-related physical injuries and the scientific robustness of studies requires improvement. PMID:27609849
Extraordinary tools for extraordinary science: the impact of SciDAC on accelerator science and technology

NASA Astrophysics Data System (ADS)

Ryne, Robert D.

2006-09-01

Particle accelerators are among the most complex and versatile instruments of scientific exploration. They have enabled remarkable scientific discoveries and important technological advances that span all programs within the DOE Office of Science (DOE/SC). The importance of accelerators to the DOE/SC mission is evident from an examination of the DOE document, ''Facilities for the Future of Science: A Twenty-Year Outlook.'' Of the 28 facilities listed, 13 involve accelerators. Thanks to SciDAC, a powerful suite of parallel simulation tools has been developed that represent a paradigm shift in computational accelerator science. Simulations that used to take weeks or more now take hours, and simulations that were once thought impossible are now performed routinely. These codes have been applied to many important projects of DOE/SC including existing facilities (the Tevatron complex, the Relativistic Heavy Ion Collider), facilities under construction (the Large Hadron Collider, the Spallation Neutron Source, the Linac Coherent Light Source), and to future facilities (the International Linear Collider, the Rare Isotope Accelerator). The new codes have also been used to explore innovative approaches to charged particle acceleration. These approaches, based on the extremely intense fields that can be present in lasers and plasmas, may one day provide a path to the outermost reaches of the energy frontier. Furthermore, they could lead to compact, high-gradient accelerators that would have huge consequences for US science and technology, industry, and medicine. In this talk I will describe the new accelerator modeling capabilities developed under SciDAC, the essential role of multi-disciplinary collaboration with applied mathematicians, computer scientists, and other IT experts in developing these capabilities, and provide examples of how the codes have been used to support DOE/SC accelerator projects.
Chromium Isotopes in Marine Carbonates - an Indicator for Climatic Change?

NASA Astrophysics Data System (ADS)

Frei, R.; Gaucher, C.

2010-12-01

Chromium (Cr) stable isotopes experience an increased interest as a tracer of Cr (VI) reduction in groundwater and thus showed their potential as a monitor of remediation of anthropogenic and natural contamination in water (Berna et al., 2009; Izbicki et al., 2008). Chromium stable isotopes in Fe-rich chemical sediments (BIFs and Fe-cherts) have recently also been used as a tracer for Earth's atmospheric oxygenation through time (Frei et al., 2009). We have applied the Cr isotope system to organic-rich carbonates from a late Ediacaran succession in Uruguay (Polanco Formation), from which we have previously analyzed BIFs with extremely fractionated (δ53Cr up to 5.0 ‰) Cr isotope signatures that are part of an underlying deep water clastic sediment (shale-dominated) sequence (Yerbal Formation) deposited in a glacio-marine environment (Gaucher et al.,2004). δ53Cr values of organic rich carbonates correlate with positive and negative carbon isotope excursions (δ13C PDB between -3 and +3 ‰) and with systematic changes in strontium isotope compositions, commonly interpreted as to reflect fluctuations in organic (photosynthetic algae) production related to fluctuations in atmospheric oxygen and weathering intensities, respectively. Slightly positively fractioned δ53Cr values (up to +0.25‰), paralleling positive (δ13C PDB and 87Sr/86Sr ratio excursions would thereby trace elevated atmospheric oxygen levels/pulses possibly related to glacier retreat/melting stages that caused bioproductivity to increase. While the causal link between these multiple isotopic tracers and the mechanisms of Cr stripping into carbonates has to be further investigated in detail, the first indications from this study point to a potentially promising use of stable Cr isotopes in organic-rich carbonates to monitor fluctuations of atmospheric oxygen, particularly over the Neoproterozoic and Phanerozoic ice age periods. E.C. Berna et al. (2010) Cr stable isotopes as indicators of Cr(VI) reduction in groundwater: a detailed time-series study of a point-source plume. Environ. Sci. Technol., v. 44, p. 1043-1048. J.A. Izbicki et al. (2008) Chromium, chromium isotopes and selected trace elements, western Mojave Desert, USA. Applied Geochemistry, v.23, p. 1325-1352. R. Frei et al. (2009) Fluctuations in Precambrian atmospheric oxygenation recorded by chromium isotopes. Nature, v. 461, p. 250-253. C. Gaucher et al. (2004) Chemostratigraphy of the Lower Arroyo del Soldado Group (Vendian, Uruguay) and palaeoclimatic implications. Gondwana Research, v.7, p. 715-730
An assessment of sources and pathways of human exposure to polybrominated diphenyl ethers in the United States.

PubMed

Johnson-Restrepo, Boris; Kannan, Kurunthachalam

2009-07-01

Polybrominated diphenyl ethers (PBDEs) are ubiquitous in the indoor environment, owing to their use in consumer products ranging from electronics to mattresses, furniture, and carpets. People are exposed to PBDEs through inhalation of indoor air and ingestion, and dermal absorption of dust particles present in the air. In this study, concentrations of PBDEs were determined in indoor air and house dust collected from homes in Albany, New York, USA. Based on the measured concentrations of PBDEs in indoor air and dust, we estimated daily exposure dose (DED) of PBDEs. In addition, we used previously published PBDE concentrations reported for breast milk from Massachusetts, USA [Johnson-Restrepo, B., Addink, R., Wong, C., Arcaro, K., Kannan, K., 2007. Polybrominated diphenyl ethers and organochlorine pesticides in human breast milk from Massachusetts. USA. J. Environ. Monitor. 9, 1205-1212] and foodstuffs collected from Texas and Florida, USA [Schecter, A., Päpke, O., Harris, T.R., Tung, K.C., Musumba, A., Olson, J., Birnbaum, L., 2006. Polybrominated diphenyl ether (PBDE) levels in an expanded market basket survey of U.S. food and estimated PBDE dietary intake by age and sex. Environ. Health Perspect. 114, 1515-1520, Johnson-Restrepo, B., Kannan, K., Addink, R., Adams, D.H., 2005b. Polybrominated diphenyl ethers and polychlorinated biphenyls in a marine foodweb of coastal Florida. Environ. Sci. Technol. 39, 8243-8250], in an estimation of dietary exposure to PBDEs. The exposure assessment was performed for five age groups: infants (<1yr), toddlers (1-5yr), children (6-11yr), teenagers (12-19yr), and adults (20yr). The dust ingestion and air inhalation factors that we used were the US Environmental Protection Agency's (EPA) exposure factors, while the daily food intake rates (g/day) were derived from the US Department of Agriculture's (USDA) food intake surveys. The total DED of PBDEs was calculated by summation of the exposures from diet, indoor air, and house dust. The average estimated DED of PBDEs was the highest for breastfed infants (86.4ng/kg-bw/day), contributed primarily (91%) from the consumption of breast milk. The average DED of PBDEs for toddlers, children, teenagers, and adults was respectively, 13.3, 5.3, 3.5, and 2.9ng/kg-bw/day. Ingestion and dermal absorption of house dust are the major pathways of PBDE exposure in toddlers, children, teenagers, and adults accounting for, on average, 56-77% of the total PBDE intake.
GHG monitoring over Paris megacity and Orléans forest

NASA Astrophysics Data System (ADS)

Te, Y. V.; Jeseck, P.; Zanon, T.; Boursier, C.; Janssen, C.; Deutscher, N. M.; Warneke, T.; Notholt, J.; Lac, C.; Dieudonné, E.; Lopez, M.; Schmidt, M.; Xueref-remy, I. C.

2012-12-01

In a growing world with more than 7 billion inhabitants and big emerging countries such as China, Brazil and India, emissions of anthropogenic pollutants and greenhouse gases (GHGs) are increasing continuously. Their monitoring and control in megacities have become a major challenge for scientists and public health authorities in environmental research area. The ground-based Fourier transform spectrometer (QualAir FTS[a], model IFS 125HR) of the QualAir platform located in downtown Paris at University Pierre et Marie Curie (UPMC), is a scientific research instrument dedicated to the survey of greenhouse gases (GHGs) and urban air quality. Equipped with a sun-tracker, the remote sensing QualAir FTS relies on solar infrared absorption for monitoring trace gas concentrations and their variability in the Ile-de-France region[b]. Concentrations of atmospheric GHGs, especially CO2, CH4 and N2O, are retrieved by the radiative transfer model PROFFIT[c]. Because Paris is the third largest European megacity, the QualAir FTS can provide new and complementary measurements as compared to existing ground-based FTS network stations (NDACC and TCCON) located in unpolluted environments, such as the TCCON-Orléans station[d] situated in the forest of Orléans (100 km south of Paris). In the effort to integrate QualAir FTS into the TCCON network, simultaneous FTS measurements of GHGs at Paris and Orléans have been performed. We will emphasize on comparisons of CO2 from these two sites. Our comparison will be completed by high-resolved direct CO2 modeling outputs from the Meso-NH model, and ground in situ measurements at different sites (Orléans/Trainou, Paris/Jussieu, Paris/Eiffel Tower). Parts of the data were acquired in the framework of the French CO2-MEGAPARIS project[e, f], whose main goal is to quantify CO2 emissions from the Paris area. The present data intercomparison will help to reduce uncertainties in carbon cycle models and to better characterize regional GHG fluxes, especially with respect to anthropogenic emission sources (urban versus rural) and trends. References: [a] Té et al., J. Atmos. Oceanic Technol., 29, 911-921, 2012 [b] Té et al., Rev. Sci. Instrum., 81, 103102, 2010 [c] Hase et al., JQSRT, 87, 25-52, 2004 [d] https://tccon-wiki.caltech.edu/Sites/Orleans [e] http://co2-megaparis.lsce.ipsl.fr/ [f] Xueref-Remy et al., Abstract n°A13F-0277, AGU Fall Meeting 2010, San Francisco, USA
Cyclo-octafluorobutane (PFC-318) in the global atmosphere

NASA Astrophysics Data System (ADS)

Muhle, J.; Vollmer, M. K.; Fraser, P. J.; Rhee, T. S.; Ivy, D. J.; Arnold, T.; Harth, C. M.; Salameh, P.; O'Doherty, S.; Young, D.; Steele, P.; Krummel, P. B.; Leist, M.; Schmidbauer, N.; Lunder, C.; Kim, J.; Kim, K.; Reimann, S.; Simmonds, P.; Prinn, R. G.; Weiss, R. F.

2010-12-01

PFC-318 (c-C4F8, cyclo-octafluorobutane) is a long-lived (3200 years) perfluorocarbon (PFC) greenhouse gas with a high 100-year Global Warming Potential (GWP100 = 10,300) and a wide range of industrial uses. We extend previous atmospheric measurements of PFC-318 in the Cape Grim Air Archive (Oram, 1999) with our new in situ measurements from remote and urban AGAGE (Advanced Global Atmospheric Gases Experiment) and affiliated stations. Our longest in situ record is from the Jungfraujoch observatory in the Swiss Alps, and our data set is augmented by measurements of flasks from the King Sejong and Troll coastal Antarctic stations and several locations in the Northern Hemisphere. In mid-2009 we find ˜1.25 ppt (parts-per-trillion, dry mol fraction) in the Northern Hemisphere and ˜1.20 ppt in the Southern Hemisphere, with rise rates of ˜0.03 ppt/yr and an interhemispheric ratio of ˜1.04. We obtain PFC-318 emissions for 2008-2010 of ˜1 Gg/yr using a simple box model, and preliminary measurements of older archived air at SIO indicate similar emissions since at the least the late 1990s. In contrast, the EDGAR v4 emissions database estimates much lower PFC-318 emissions of 0.02 Gg/yr for 2005. Using GWP100 we calculate ˜10 million tons of CO2-equivalent PFC-318 emissions/yr for 2008-2010, about double the CO2-equivalent PFC-218 annual emissions, or 0.4 times the CO2-equivalent PFC-116 annual emissions, reported for 2008-2009 by Mühle et al. (2010). Thus PFC-318 is the third most important PFC in terms of CO2-equivalent emissions. We find mostly baseline conditions at remote AGAGE stations and urban sites in the USA, Europe, and Australia, in contrast to frequent above baseline conditions at Gosan station, Jeju Island, South Korea, indicating significant emission sources in East Asia as found by Saito et al. (2010). Oram, D.E., Trends of long-lived anthropogenic halocarbons in the Southern Hemisphere and model calculation of global emissions, Ph.D. thesis, University of East Anglia, Norwich, U.K., 1999. Mühle et al., Perfluorocarbons in the global atmosphere: tetrafluoromethane, hexafluoroethane, and octafluoropropane, Atmos. Chem. Phys., 10(11), 5145-5164, doi:10.5194/acp-10-5145-2010, 2010. Saito et al., Large Emissions of Perfluorocarbons in East Asia Deduced from Continuous Atmospheric Measurements, Environ. Sci. Technol., 44(11), 4089-4095, doi:10.1021/es1001488, 2010.
Sensitivity of the SCI-FI/AT in Individuals With Traumatic Spinal Cord Injury.

PubMed

Keeney, Tamra; Slavin, Mary; Kisala, Pamela; Ni, Pengsheng; Heinemann, Allen W; Charlifue, Susan; Fyffe, Denise C; Marino, Ralph J; Morse, Leslie R; Worobey, Lynn A; Tate, Denise; Rosenblum, David; Zafonte, Ross; Tulsky, David; Jette, Alan M

2018-03-31

To examine the ability of the Spinal Cord Injury-Functional Index/Assistive Technology (SCI-FI/AT) measure to detect change in persons with spinal cord injury (SCI). Multisite longitudinal (12-mo follow-up) study. Nine SCI Model Systems programs. Adults (N=165) with SCI enrolled in the SCI Model Systems database. Not applicable. SCI-FI/AT computerized adaptive test (CAT) (Basic Mobility, Self-Care, Fine Motor Function, Wheelchair Mobility, and/or Ambulation domains) completed at discharge from rehabilitation and 12 months after SCI. For each domain, effect size estimates and 95% confidence intervals were calculated for subgroups with paraplegia and tetraplegia. The demographic characteristics of the sample were as follows: 46% (n=76) individuals with paraplegia, 76% (n=125) male participants, 57% (n=94) used a manual wheelchair, 38% (n=63) used a power wheelchair, 30% (n=50) were ambulatory. For individuals with paraplegia, the Basic Mobility, Self-Care, and Ambulation domains of the SCI-FI/AT detected a significantly large amount of change; in contrast, the Fine Motor Function and Wheelchair Mobility domains detected only a small amount of change. For those with tetraplegia, the Basic Mobility, Fine Motor Function, and Self-Care domains detected a small amount of change whereas the Ambulation item domain detected a medium amount of change. The Wheelchair Mobility domain for people with tetraplegia was the only SCI-FI/AT domain that did not detect significant change. SCI-FI/AT CAT item banks detected an increase in function from discharge to 12 months after SCI. The effect size estimates for the SCI-FI/AT CAT vary by domain and level of lesion. Findings support the use of the SCI-FI/AT CAT in the population with SCI and highlight the importance of multidimensional functional measures. Copyright © 2018 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.
Acute and Chronic Deficits in the Urinary Bladder after Spinal Contusion Injury in the Adult Rat

PubMed Central

Herrera, Juan J.; Haywood-Watson, Ricky J.L.

2010-01-01

Abstract Traumatic spinal cord injury (SCI) permanently alters bladder function in humans. Hematuria and cystitis occur in both human SCI as well as in rodent models of SCI. Others have reported early SCI-dependent disruption to bladder uroepithelial integrity that results in increased permeability to urine and urine-borne substances. This can result in cystitis, or inflammation of the bladder, an ongoing pathological condition present throughout the chronic phase of SCI in humans. The goals of our study were twofold: (1) to begin to examine the inflammatory and molecular changes that occur within the bladder uroepithelium using a clinically-relevant spinal contusion model of injury, and (2) to assess whether these alterations continue into the chronic phase of SCI. Rats received either moderate SCI or sham surgery. Urine was collected from SCI and sham subjects over 7 days or at 7 months to assess levels of excreted proteins. Inflammation in the bladder wall was assessed via biochemical and immunohistochemical methods. Bladder tight junction proteins, mediators of uroepithelial integrity, were also measured in both the acute and chronic phases of SCI. Urine protein and hemoglobin levels rapidly increase following SCI. An SCI-dependent elevation in numbers of neutrophils within the bladder wall peaked at 48 h. Bladder tight junction proteins demonstrate a rapid but transient decrease as early as 2 h post-SCI. Surprisingly, elevated levels of urine proteins and significant deficits in bladder tight junction proteins could be detected in chronic SCI, suggesting that early pathological changes to the bladder may continue throughout the chronic phase of injury. PMID:19891526
Mapping the scientific research on non-point source pollution: a bibliometric analysis.

PubMed

Yang, Beibei; Huang, Kai; Sun, Dezhi; Zhang, Yue

2017-02-01

A bibliometric analysis was conducted to examine the progress and future research trends of non-point source (NPS) pollution during the years 1991-2015 based on the Science Citation Index Expanded (SCI-Expanded) of Web of Science (WoS). The publications referencing NPS pollution were analyzed including the following aspects: document type, publication language, publication output and characteristics, subject category, source journal, distribution of country and institution, author keywords, etc. The results indicate that the study of NPS pollution demonstrated a sharply increasing trend since 1991. Article and English were the most commonly used document type and language. Environmental sciences and ecology, water resources, and engineering were the top three subject categories. Water science and technology ranked first in distribution of journal, followed by Science of the total environment and Environmental Monitoring and Assessment. The USA took a leading position in both quantity and quality, playing an important role in the research field of NPS pollution, followed by the UK and China. The most productive institution was the Chinese Academy of Sciences (Chinese Acad Sci), followed by Beijing Normal University and US Department of Agriculture's Agricultural Research Service (USDA ARS). The analysis of author keywords indicates that the major hotspots of NPS pollution from 1991 to 2015 contained "water," "model," "agriculture," "nitrogen," "phosphorus," etc. The results provide a comprehensive understanding of NPS pollution research and help readers to establish the future research directions.
Aerosol volatility in a boreal forest environment

NASA Astrophysics Data System (ADS)

Häkkinen, S. A. K.; ńijälä, M.; Lehtipalo, K.; Junninen, H.; Virkkula, A.; Worsnop, D. R.; Kulmala, M.; Petäjä, T.; Riipinen, I.

2012-04-01

Climate and health effects of atmospheric aerosols are determined by their properties such as their chemical composition. Aerosol chemical composition can be studied indirectly by measuring volatility of aerosol particles. The volatility of submicron aerosol particles (20-500 nm) was studied in a boreal forest site at SMEAR II (Station for Measuring Ecosystem-Atmosphere Relations II) station (Vesala et al., 1998) in Hyytiälä, Finland, during 01/2008-05/2010. The instrument used for the measurements was VDMPS (Volatility Differential Mobility Particle Sizer), which consists of two separate instruments: DMPS (Differential Mobility Particle Sizer, Aalto et al., 2001) and TD (Thermodenuder, Wehner et al., 2002). Aerosol evaporation was examined by heating the aerosol and comparing the total aerosol mass before and after heating. In the VDMPS system ambient aerosol sample was heated up to temperatures ranging from 80 °C to 280 °C. The higher the heating temperature was the more aerosol material was evaporated. There was a non-volatile residual present in aerosol particles when heated up to 280 °C. This residual explained (20±8)% of the total aerosol mass. Aerosol non-volatile mass fraction was highest during winter and smallest during summer months. The role of black carbon in the observed non-volatile residual was determined. Black carbon explained 40 to 90% of the non-volatile mass. Especially during colder seasons noticeable amount of non-volatile material, something else than black carbon, was observed. According to Kalberer et al. (2004) some atmospheric organic species can form polymers that have high evaporation temperatures. Also low-volatile organic salts may contribute to the non-volatile aerosol (Smith et al., 2010). Aerosol mass composition measured directly with AMS (Aerosol Mass Spectrometer, Jayne et al., 2000) was analyzed in order to examine the properties of the non-volatile material (other than black carbon). The AMS measurements were performed during spring and autumn 2008. Results from the aerosol mass spectrometry indicate that the non-volatile residual consists of nitrate and organic compounds, especially during autumn. These compounds may be low-volatile organic nitrates or salts. During winter and spring the non-volatile core (black carbon removed) correlated markedly with carbon monoxide, which is a tracer of anthropogenic emissions. Due to this, the non-volatile residual may also contain other pollutants in addition to black carbon. Thus, it seems that the amount of different compounds in submicron aerosol particles varies with season and as a result the chemical composition of the non-volatile residual changes within a year. This work was supported by University of Helsinki three-year research grant No 490082 and Maj and Tor Nessling Foundation grant No 2010143. Aalto et al., (2001). Physical characterization of aerosol particles during nucleation events. Tellus B, 53, 344-358. Jayne, et al., (2000). Development of an aerosol mass spectrometer for size and composition analysis of submicron particles. Aerosol Sci. Technol., 33(1-2), 49-70. Kalberer et al., (2004). Identification of Polymers as Major Components of Atmospheric Organic Aerosols. Science, 303, 1659-1662. Smith et al., (2010). Observations of aminium salts in atmospheric nanoparticles and possible climatic implications. P. Natl. Acad. Sci., 107(15). Vesala et al., (1998). Long-term field measurements of atmosphere-surface interactions in boreal forest combining forest ecology, micrometeorology, aerosol physics and atmospheric chemistry. Trends Heat, Mass Mom. Trans., 4, 17-35. Wehner et al., (2002). Design and calibration of a thermodenuder with an improved heating unit to measure the size-dependent volatile fraction of aerosol particles. J. Aerosol Sci., 33, 1087-1093.
Targeting Translational Successes through CANSORT-SCI: Using Pet Dogs To Identify Effective Treatments for Spinal Cord Injury.

PubMed

Moore, Sarah A; Granger, Nicolas; Olby, Natasha J; Spitzbarth, Ingo; Jeffery, Nick D; Tipold, Andrea; Nout-Lomas, Yvette S; da Costa, Ronaldo C; Stein, Veronika M; Noble-Haeusslein, Linda J; Blight, Andrew R; Grossman, Robert G; Basso, D Michele; Levine, Jonathan M

2017-06-15

Translation of therapeutic interventions for spinal cord injury (SCI) from laboratory to clinic has been historically challenging, highlighting the need for robust models of injury that more closely mirror the human condition. The high prevalence of acute, naturally occurring SCI in pet dogs provides a unique opportunity to evaluate expeditiously promising interventions in a population of animals that receive diagnoses and treatment clinically in a manner similar to persons with SCI, while adhering to National Institutes of Health guidelines for scientific rigor and transparent reporting. In addition, pet dogs with chronic paralysis are often maintained long-term by their owners, offering a similarly unique population for study of chronic SCI. Despite this, only a small number of studies have used the clinical dog model of SCI. The Canine Spinal Cord Injury Consortium (CANSORT-SCI) was recently established by a group of veterinarians and basic science researchers to promote the value of the canine clinical model of SCI. The CANSORT-SCI group held an inaugural meeting November 20 and 21, 2015 to evaluate opportunities and challenges to the use of pet dogs in SCI research. Key challenges identified included lack of familiarity with the model among nonveterinary scientists and questions about how and where in the translational process the canine clinical model would be most valuable. In light of these, we review the natural history, outcome, and available assessment tools associated with canine clinical SCI with emphasis on their relevance to human SCI and the translational process.

High Prevalence of Stress and Low Prevalence of Alzheimer Disease CSF Biomarkers in a Clinical Sample with Subjective Cognitive Impairment.

PubMed

Eckerström, Marie; Berg, Anne Ingeborg; Nordlund, Arto; Rolstad, Sindre; Sacuiu, Simona; Wallin, Anders

2016-01-01

Subjective cognitive impairment (SCI) is a trigger for seeking health care in a possible preclinical phase of Alzheimer's disease (AD), although the characteristics of SCI need clarification. We investigated the prevalence of psychosocial stress, depressive symptoms and CSF AD biomarkers in SCI and MCI (mild cognitive impairment). Memory clinic patients (SCI: n = 90; age: 59.8 ± 7.6 years; MCI: n = 160; age: 63.7 ± 7.0 years) included in the Gothenburg MCI study were examined at baseline. Variables were analyzed using logistic regression with SCI as dependent variable. Stress was more prevalent in SCI (51.1%) than MCI (23.1%); p < 0.0005. SCI patients had more previous depressive symptoms (p = 0.006), but showed no difference compared to MCI patients considering current depressive symptoms. A positive CSF AD profile was present in 14.4% of SCI patients and 35.0% of MCI patients (p = 0.001). Stress (p = 0.002), previous stress/depressive symptoms (p = 0.006) and a negative CSF AD profile (p = 0.036) predicted allocation to the SCI group. Psychosocial stress is more prevalent in SCI than previously acknowledged. The high prevalence and long-term occurrence of stress/depressive symptoms in SCI in combination with a low prevalence of altered CSF AD biomarkers strengthens the notion that AD is not the most likely etiology of SCI. © 2016 S. Karger AG, Basel.
Studies of extraction and transport system for highly charged ion beam of 18 GHz superconducting electron cyclotron resonance ion source at Research Center for Nuclear Physics.

PubMed

Yorita, T; Hatanaka, K; Fukuda, M; Ueda, H; Yasuda, Y; Morinobu, S; Tamii, A; Kamakura, K

2014-02-01

An 18 GHz superconducting electron cyclotron resonance ion source is installed to increase beam currents and to extend the variety of ions especially for highly charged heavy ions which can be accelerated by cyclotrons of Research Center for Nuclear Physics (RCNP), Osaka University. The beam production developments of several ions from B to Xe have been already done [T. Yorita, K. Hatanaka, M. Fukuda, M. Kibayashi, S. Morinobu, H.Okamura, and A. Tamii, Rev. Sci. Instrum. 79, 02A311 (2008) and T. Yorita, K. Hatanaka, M. Fukuda, M. Kibayashi, S. Morinobu, H.Okamura, and A. Tamii, Rev. Sci. Instrum. 81, 02A332 (2010)] and the further studies for those beam extraction and its transport have been done in order to increase the beam current more. The plasma electrode, extraction electrode, and einzel lens are modified. Especially extraction electrode can be applied minus voltage for the beam extraction and it works well to improve the extracted beam current. The extraction voltage dependences of transmission and emittance also have been studied for beam current improvement which is injected into azimuthally varying field cyclotron at RCNP.
Use, knowledge, and perception of the scientific contribution of Sci-Hub in medical students: Study in six countries in Latin America.

PubMed

Mejia, Christian R; Valladares-Garrido, Mario J; Miñan-Tapia, Armando; Serrano, Felipe T; Tobler-Gómez, Liz E; Pereda-Castro, William; Mendoza-Flores, Cynthia R; Mundaca-Manay, Maria Y; Valladares-Garrido, Danai

2017-01-01

Sci-Hub is a useful web portal for people working in science as it provides access to millions of free scientific articles. Satisfaction and usage should be explored in the Latino student population. The objective of this study was to evaluate the use, knowledge, and perception of the scientific contribution of Sci-Hub in medical students from Latin America. A multicenter, observational, analytical study was conducted in 6632 medical students from 6 countries in Latin America. We surveyed from a previously validated instrument, delving into knowledge, monthly average usage, satisfaction level, and perception of the scientific contributions provided by Sci-Hub. Frequencies and percentages are described, and generalized linear models were used to establish statistical associations. Only 19.2% of study participants knew of Sci-Hub and its function, while the median use was twice a month. 29.9% of Sci-Hub-aware participants claimed they always find the desired scientific information in their Sci-Hub search; 62.5% of participants affirmed that Sci-Hub contributes to scientific investigation; only 2.2% reported that Sci-Hub does not contribute to science. The majority of Latino students are not aware of Sci-Hub.
A quantitative and qualitative evaluation of reports of clinical trials published in six Brazilian dental journals indexed in the Scientific Electronic Library Online (SciELO)

PubMed Central

de SOUZA, Raphael Freitas; CHAVES, Carolina de Andrade Lima; CHAVES, Carolina de Andrade Lima; CHAVES, Carolina de Andrade Lima; NASSER, Mona; FEDOROWICZ, Zbys

2010-01-01

Open access publishing is becoming increasingly popular within the biomedical sciences. SciELO, the Scientific Electronic Library Online, is a digital library covering a selected collection of Brazilian scientific journals many of which provide open access to full-text articles. This library includes a number of dental journals some of which may include reports of clinical trials in English, Portuguese and/or Spanish. Thus, SciELO could play an important role as a source of evidence for dental healthcare interventions especially if it yields a sizeable number of high quality reports. Objective The aim of this study was to identify reports of clinical trials by handsearching of dental journals that are accessible through SciELO, and to assess the overall quality of these reports. Material and methods Electronic versions of six Brazilian dental Journals indexed in SciELO were handsearched at www.scielo.br in September 2008. Reports of clinical trials were identified and classified as controlled clinical trials (CCTs - prospective, experimental studies comparing 2 or more healthcare interventions in human beings) or randomized controlled trials (RCTs - a random allocation method is clearly reported), according to Cochrane eligibility criteria. Criteria to assess methodological quality included: method of randomization, concealment of treatment allocation, blinded outcome assessment, handling of withdrawals and losses and whether an intention-totreat analysis had been carried out. Results The search retrieved 33 CCTs and 43 RCTs. A majority of the reports provided no description of either the method of randomization (75.3%) or concealment of the allocation sequence (84.2%). Participants and outcome assessors were reported as blinded in only 31.2% of the reports. Withdrawals and losses were only clearly described in 6.5% of the reports and none mentioned an intention-totreat analysis or any similar procedure. Conclusions The results of this study indicate that a substantial number of reports of trials and systematic reviews are available in the dental journals listed in SciELO, and that these could provide valuable evidence for clinical decision making. However, it is clear that the quality of a number of these reports is of some concern and that improvement in the conduct and reporting of these trials could be achieved if authors adhered to internationally accepted guidelines, e.g. the CONSORT statement. PMID:20485919
A quantitative and qualitative evaluation of reports of clinical trials published in six Brazilian dental journals indexed in the Scientific Electronic Library Online (SciELO).

PubMed

de Souza, Raphael Freitas; Chaves, Carolina de Andrade Lima; Nasser, Mona; Fedorowicz, Zbys

2010-01-01

Open access publishing is becoming increasingly popular within the biomedical sciences. SciELO, the Scientific Electronic Library Online, is a digital library covering a selected collection of Brazilian scientific journals many of which provide open access to full-text articles.This library includes a number of dental journals some of which may include reports of clinical trials in English, Portuguese and/or Spanish. Thus, SciELO could play an important role as a source of evidence for dental healthcare interventions especially if it yields a sizeable number of high quality reports. The aim of this study was to identify reports of clinical trials by handsearching of dental journals that are accessible through SciELO, and to assess the overall quality of these reports. Electronic versions of six Brazilian dental Journals indexed in SciELO were handsearched at www.scielo.br in September 2008. Reports of clinical trials were identified and classified as controlled clinical trials (CCTs - prospective, experimental studies comparing 2 or more healthcare interventions in human beings) or randomized controlled trials (RCTs - a random allocation method is clearly reported), according to Cochrane eligibility criteria. CRITERIA TO ASSESS METHODOLOGICAL QUALITY INCLUDED: method of randomization, concealment of treatment allocation, blinded outcome assessment, handling of withdrawals and losses and whether an intention-to-treat analysis had been carried out. The search retrieved 33 CCTs and 43 RCTs. A majority of the reports provided no description of either the method of randomization (75.3%) or concealment of the allocation sequence (84.2%). Participants and outcome assessors were reported as blinded in only 31.2% of the reports. Withdrawals and losses were only clearly described in 6.5% of the reports and none mentioned an intention-to-treat analysis or any similar procedure. The results of this study indicate that a substantial number of reports of trials and systematic reviews are available in the dental journals listed in SciELO, and that these could provide valuable evidence for clinical decision making. However, it is clear that the quality of a number of these reports is of some concern and that improvement in the conduct and reporting of these trials could be achieved if authors adhered to internationally accepted guidelines, e.g. the CONSORT statement.
Recommendations for the National Institute for Neurologic Disorders and Stroke spinal cord injury common data elements for children and youth with SCI.

PubMed

Mulcahey, M J; Vogel, L C; Sheikh, M; Arango-Lasprilla, J C; Augutis, M; Garner, E; Hagen, E M; Jakeman, L B; Kelly, E; Martin, R; Odenkirchen, J; Scheel-Sailer, A; Schottler, J; Taylor, H; Thielen, C C; Zebracki, K

2017-04-01

In 2014, the adult spinal cord injury (SCI) common data element (CDE) recommendations were made available. This project was a review of the adult SCI CDE for relevance to children and youth with SCI. The objective of this study was to review the National Institute of Neurologic Disorders and Stroke (NINDS) adult SCI CDEs for relevance to children and youth with SCI. International. The pediatric working group consisted of international members with varied fields of expertise related to pediatric SCI. The group convened biweekly meetings for 6 months in 2015. All of the adult SCI CDEs were reviewed, evaluated and modified/created for four age groups: 0-5 years, 6-12 years, 13-15 years and 16-18 years. Whenever possible, results of published research studies were used to guide recommendations. In the absence of empirical support, grey literature and international content expert consensus were garnered. Existing pediatric NINDS CDEs and new CDEs were developed in areas where adult recommendations were not appropriate. After internal working group review of domain recommendations, these pediatric CDEs were vetted during a public review from November through December 2015. Version 1.0 of the pediatric SCI CDEs was posted in February 2016. The pediatric SCI CDEs are incorporated directly into the NINDS SCI CDE sets and can be found at https://commondataelements.ninds.nih.gov.
Spinal cord injury below-level neuropathic pain relief with dorsal root entry zone microcoagulation performed caudal to level of complete spinal cord transection.

PubMed

Falci, Scott; Indeck, Charlotte; Barnkow, Dave

2018-06-01

OBJECTIVE Surgically created lesions of the spinal cord dorsal root entry zone (DREZ) to relieve central pain after spinal cord injury (SCI) have historically been performed at and cephalad to, but not below, the level of SCI. This study was initiated to investigate the validity of 3 proposed concepts regarding the DREZ in SCI central pain: 1) The spinal cord DREZ caudal to the level of SCI can be a primary generator of SCI below-level central pain. 2) Neuronal transmission from a DREZ that generates SCI below-level central pain to brain pain centers can be primarily through sympathetic nervous system (SNS) pathways. 3) Perceived SCI below-level central pain follows a unique somatotopic map of DREZ pain-generators. METHODS Three unique patients with both intractable SCI below-level central pain and complete spinal cord transection at the level of SCI were identified. All 3 patients had previously undergone surgical intervention to their spinal cords-only cephalad to the level of spinal cord transection-with either DREZ microcoagulation or cyst shunting, in failed attempts to relieve their SCI below-level central pain. Subsequent to these surgeries, DREZ lesioning of the spinal cord solely caudal to the level of complete spinal cord transection was performed using electrical intramedullary guidance. The follow-up period ranged from 1 1/2 to 11 years. RESULTS All 3 patients in this study had complete or near-complete relief of all below-level neuropathic pain. The analyzed electrical data confirmed and enhanced a previously proposed somatotopic map of SCI below-level DREZ pain generators. CONCLUSIONS The results of this study support the following hypotheses. 1) The spinal cord DREZ caudal to the level of SCI can be a primary generator of SCI below-level central pain. 2) Neuronal transmission from a DREZ that generates SCI below-level central pain to brain pain centers can be primarily through SNS pathways. 3) Perceived SCI below-level central pain follows a unique somatotopic map of DREZ pain generators.
Not just quantity: gluteus maximus muscle characteristics in able-bodied and SCI individuals--implications for tissue viability.

PubMed

Wu, Gary A; Bogie, Kath M

2013-08-01

Some individuals with spinal cord injury (SCI) remain pressure ulcer (PU) free whilst others experience a recurring cycle of tissue breakdown. Detailed analysis of gluteal muscle characteristics may provide insights to local tissue viability variability. The study hypothesis was that SCI individuals have altered muscle composition compared to able-bodied (AB). Ten AB and ten SCI received a supine pelvic CT scan, with contrast. Cross-sectional area (CSA) and overall muscle volume were derived using image analysis. Gluteal muscle tissue type was classified at the S2/S3 sacral vertebrae midpoint, the superior greater trochanters margin (GT) and the inferior ischial tuberosities margin (IT) using the linear transformation Hounsfield Unit scale. SCI gluteal CSA was less than for AB throughout the muscle, with the greatest relative atrophy at the IT (48%). Average AB gluteal volume was nearly double SCI. Eight SCI had over 20% infiltrative adipose tissue, three with over 50%. SCI gluteal CSA and intramuscular fat infiltration were significantly negatively correlated (p < 0.05). SCI IT axial slices showed less lean muscle and higher intramuscular fat infiltration than more proximally (p < 0.05). SCI gluteal muscle characteristics were indicative of impaired tissue viability. SCI disuse muscle atrophy was anticipated; the analytic approach further indicated that intramuscular atrophy was not uniform. SCI muscle composition showed increased proportions of both low density muscle and adipose tissue. CT scan with contrast is effective for gluteal muscle characterization. This assessment technique may contribute to determination of personalized risk for PU development and other secondary complications. Published by Elsevier Ltd.
Targeting Translational Successes through CANSORT-SCI: Using Pet Dogs To Identify Effective Treatments for Spinal Cord Injury

PubMed Central

Granger, Nicolas; Olby, Natasha J.; Spitzbarth, Ingo; Jeffery, Nick D.; Tipold, Andrea; Nout-Lomas, Yvette S.; da Costa, Ronaldo C.; Stein, Veronika M.; Noble-Haeusslein, Linda J.; Blight, Andrew R.; Grossman, Robert G.; Basso, D. Michele; Levine, Jonathan M.

2017-01-01

Abstract Translation of therapeutic interventions for spinal cord injury (SCI) from laboratory to clinic has been historically challenging, highlighting the need for robust models of injury that more closely mirror the human condition. The high prevalence of acute, naturally occurring SCI in pet dogs provides a unique opportunity to evaluate expeditiously promising interventions in a population of animals that receive diagnoses and treatment clinically in a manner similar to persons with SCI, while adhering to National Institutes of Health guidelines for scientific rigor and transparent reporting. In addition, pet dogs with chronic paralysis are often maintained long-term by their owners, offering a similarly unique population for study of chronic SCI. Despite this, only a small number of studies have used the clinical dog model of SCI. The Canine Spinal Cord Injury Consortium (CANSORT-SCI) was recently established by a group of veterinarians and basic science researchers to promote the value of the canine clinical model of SCI. The CANSORT-SCI group held an inaugural meeting November 20 and 21, 2015 to evaluate opportunities and challenges to the use of pet dogs in SCI research. Key challenges identified included lack of familiarity with the model among nonveterinary scientists and questions about how and where in the translational process the canine clinical model would be most valuable. In light of these, we review the natural history, outcome, and available assessment tools associated with canine clinical SCI with emphasis on their relevance to human SCI and the translational process. PMID:28230415
Microbiology of Fresh Comminuted Turkey Meat

DTIC Science & Technology

1976-04-12

823 Reprinted from J. Milk Food Technol. Vol. 39. No. 12. Pages 823-829 (December. 1976) Cooyright 1976, International Association of Milk , Food, and...most probable number (MPN) method (13). niacin, and riboflavin (29). Canadian officials have proposed microbial standards The literature contains...onto Mueller-Hinton agar plates containing 5% various retail markets in the San Francisco Bay Area. They were defibrinated sheep blood. Representative
JPRS Report China

DTIC Science & Technology

1988-05-23

materials and teach them the technol- ogy. Once armed with the technology, they went into business on their own, borrowing capital from overseas Chinese or...opened this year. 12802 AGRICULTURE Projects Supported by National Natural Science Foundation 40060239 Beijing ZHIWU XUEBAO [ACTA BOTANICA SINICAJ...On Research in Educational Psychology; * 1. Research in the psychology of esthetics; * 2. Study and application of psychology of teaching ; 3
Lethal and Legal The Ethics of Drone Strikes

DTIC Science & Technology

2015-12-01

analysis, evaluation, and refinement of professional expertise in war, strategy, operations, national security, resource management , and responsible...in business studies and holds an M.Phil. in defence and security studies from the Defence College of Management and Technol- ogy, Defence Academy...in unsafe buildings, search and rescue missions in treacherous conditions, police searches for missing or wanted persons, traffic management , public
Software Development for Decision Analysis

DTIC Science & Technology

1975-03-01

to p Pollution Cost/lb Sulfur Emitted ( Flue Gas Desulfurization ) 178 3.11 Sensitivity of Total Societal Cost/KWH to...34 and "FGD ( flue gas desulfurization ) technology" have all been represented. The branching structure shown in Figure 3.7 (and for that matter each... Gas Desulfurization ) technol- ogy" are decision variables representing possible means of sulfur oxide emission control avallabie for the electric
THE EFFECT OF AMOUNT OF CRUDE OIL ON EXTENT OF ITS BIODEGRADATION IN OPEN WATER- AND SANDY BEACH- LABORATORY SIMULATIONS

EPA Science Inventory

Lepo, J.E., C. R. Cripe, J.L. Kavanaugh, S. Zhang and G.P. Norton. 2003. Effect of Amount of Crude Oil on Extent of Its Biodegradation in Open Water- and Sandy Beach-Laboratory Simulations. Environ. Technol. 24(10):1291-1302. (ERL,GB 1109).

We examined the biodegradation ...
Spinal-Cord-Injured Individual's Experiences of Having a Partner: A Phenomenological-Hermeneutic Study.

PubMed

Angel, Sanne

2015-06-01

Having a partner is a strong factor in adaptation to the new life situation with a spinal cord injury (SCI). Still, more knowledge in detail about the partner's influences according to the experiences of individuals with SCI could contribute to the understanding of the situation after an injury. The aim of this phenomenological-hermeneutic article is to achieve a deeper understanding of nine individuals' experiences the first 2 years after SCI. In rehabilitation after SCI, the partner supported the SCI individual's life spirit by not giving up and by still seeing possibilities in the future. The partner reinforced the SCI individual's commitment to life by sharing experiences; providing love, trust, and hope; and giving priority to the best things in life for the SCI individual. This implied cohabitation providing concrete help and an intimacy that helped to cope with problems and anxieties and allowed SCI individuals the ability to self-realize. This promoted feelings of profound gratitude but also dependency. Thus, the SCI individual benefitted from the partner's support mentally and physically, which enabled a life that would not otherwise be possible.
Global meaning in people with spinal cord injury: Content and changes

PubMed Central

Littooij, Elsbeth; Widdershoven, Guy A.M.; Stolwijk-Swüste, Janneke M.; Doodeman, Suzan; Leget, Carlo J.W.; Dekker, Joost

2016-01-01

Background After spinal cord injury (SCI), people are confronted with abrupt discontinuity in almost all areas of life, leading to questions on how to live a meaningful life again. Global meaning refers to basic ideas and goals that guide people in giving meaning to their lives, in specific situations. Little is known about global meaning relating to SCI and whether global meaning changes after SCI. Purpose The purpose of this study was twofold: (i) to explore the content of global meaning of people with SCI, and (ii) to explore whether or not global meaning changes after SCI. Methods In-depth semi-structured interviews were conducted with 16 people with SCI. Interviews were analyzed according to the method of grounded theory. Results (i) Five aspects of global meaning were found: core values, relationships, worldview, identity and inner posture. (ii) Overall, little change in the content of global meaning was found after SCI; specific aspects of global meaning were foregrounded after SCI. Conclusion Five aspects of global meaning were found in people with SCI. Global meaning seems hardly subject to change. PMID:25615571
Evaluation and Management of SCI-Associated Pain.

PubMed

Saulino, Michael; Averna, Justin F

2016-09-01

Traumatic spinal cord injury (SCI) is a devastating neurological condition. Treatment of SCI-related pain is challenging for the treating physician, as normal neural pathways are disrupted. Patients with SCI consistently rate pain as one of the most difficult problems associated with their injury. SCI-related pain can be refractory and complete relief is often not possible. The multidimensional nature of SCI-related pain affects the neural system including autonomic nervous system deregulation and can alter metabolic and biochemical processes throughout the body. Co-morbid psychological illnesses such as depression and adjustment disorder are seen in a significant percentage of patients. Despite a better understanding of the underlying pain mechanisms and advances in procedural, pharmacologic, and non-pharmacologic therapies, treatment of pain after SCI remains elusive. This manuscript reviews the current evidence-based evaluation and management of the SCI patient with the overarching goal of providing appropriate and effective management of their pain. In particular, additional well-designed studies are needed to help elucidate effective treatments for SCI-related neuropathic pain in an effort to help provide these patients with better management of their pain and improve their quality of life.
Resting-state synchrony between the retrosplenial cortex and anterior medial cortical structures relates to memory complaints in subjective cognitive impairment.

PubMed

Yasuno, Fumihiko; Kazui, Hiroaki; Yamamoto, Akihide; Morita, Naomi; Kajimoto, Katsufumi; Ihara, Masafumi; Taguchi, Akihiko; Matsuoka, Kiwamu; Kosaka, Jun; Tanaka, Toshihisa; Kudo, Takashi; Takeda, Masatoshi; Nagatsuka, Kazuyuki; Iida, Hidehiro; Kishimoto, Toshifumi

2015-06-01

Subjective cognitive impairment (SCI) is a clinical state characterized by subjective cognitive deficits without cognitive impairment. To test the hypothesis that this state might involve dysfunction of self-referential processing mediated by cortical midline structures, we investigated abnormalities of functional connectivity in these structures in individuals with SCI using resting-state functional magnetic resonance imaging. We performed functional connectivity analysis for 23 individuals with SCI and 30 individuals without SCI. To reveal the pathophysiological basis of the functional connectivity change, we performed magnetic resonance-diffusion tensor imaging. Positron emission tomography-amyloid imaging was conducted in 13 SCI and 15 nonSCI subjects. Individuals with SCI showed reduced functional connectivity in cortical midline structures. Reduction in white matter connections was related to reduced functional connectivity, but we found no amyloid deposition in individuals with SCI. The results do not necessarily contradict the possibility that SCI indicates initial cognitive decrements, but imply that reduced functional connectivity in cortical midline structures contributes to overestimation of the experience of forgetfulness. Copyright © 2015 Elsevier Inc. All rights reserved.
Stable Fe isotope fractionation during anaerobic microbial dissimilatory iron reduction at low pH

NASA Astrophysics Data System (ADS)

Chanda, P.; Amenabar, M. J.; Boyd, E. S.; Beard, B. L.; Johnson, C.

2017-12-01

In low-temperature anaerobic environments microbial dissimilatory iron reduction (DIR) plays an important role in Fe cycling. At neutral pH, sorption of aqueous Fe(II) (Fe(II)aq, produced by DIR) catalyzes isotopic exchange between Fe(II) and solid Fe(III), producing 56Fe/54Fe fractionations on the order of 3‰ during DIR[1,2,3]. At low pH, however, the absence of sorbed Fe(II) produces only limited abiologic isotopic exchange[4]. Here we investigated the scope of isotopic exchange between Fe(II)aq and ferric (hydr)oxides (ferrihydrite and goethite) and the associated stable Fe isotope fractionation during DIR by Acidianus strain DS80 at pH 3.0 and 80°C[5]. Over 19 days, 13% reduction of both minerals via microbial DIR was observed. The δ56Fe values of the fluid varied from -2.31 to -1.63‰ (ferrihydrite) and -0.45 to 0.02‰ (goethite). Partial leaching of bulk solid from each reactor with dilute HCl showed no sorption of Fe(II), and the surface layers of the solids were composed of Fe(III) with high δ56Fe values (ferrihydrite: 0.20 to 0.48‰ and goethite: 1.20 to 1.30‰). These results contrast with the lack of Fe isotope exchange in abiologic low-pH systems and indicate a key role for biology in catalyzing Fe isotope exchange between Fe(II)aq and Fe(III) solids, despite the absence of sorbed Fe(II). The estimated fractionation factor (ΔFeFe(III) -Fe(II)aq 2.6‰) from leaching of ferrihydrite is similar to the abiologic equilibrium fractionation factor ( 3.0‰)[3]. The fractionation factor (ΔFeFe(III) -Fe(II)aq 2.0‰) for goethite is higher than the abiologic fractionation factor ( 1.05‰)[2], but is consistent with the previously proposed "distorted surface layer" of goethite produced during the exchange with Fe(II)aq at neutral pH[1]. This study indicates that significant variations in Fe isotope compositions may be produced in low-pH environments where biological cycling of Fe occurs, in contrast to the expected lack of isotopic fractionation in low-pH abiologic systems, and such results bear on the search for biosignatures in Mars and Mars-analog settings. [1] Crosby et al., 2007 Geobiol. 5, 169-189 [2] Beard et al., 2010 Earth Planet. Sci. Lett. 295, 241-250 [3] Wu et al., 2011 Environ. Sci. Technol. 45, 1847-1852 [4] Reddy et al., 2015 Chem. Geol. 397, 118-127 [5] Amenabar et al., 2017 Nat. Geosci. In press
32 CFR 154.19 - Reinvestigation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... to Sensitive Compartmented Information (SCI). Each individual having current access to SCI shall be... certain SCI duties may require very special compartmentation and other special security measures. In such... for continued SCI access. (h) Foreign nationals employed by DoD organizations overseas. Foreign...

Measuring stigma after spinal cord injury: Development and psychometric characteristics of the SCI-QOL Stigma item bank and short form.

PubMed

Kisala, Pamela A; Tulsky, David S; Pace, Natalie; Victorson, David; Choi, Seung W; Heinemann, Allen W

2015-05-01

To develop a calibrated item bank and computer adaptive test (CAT) to assess the effects of stigma on health-related quality of life in individuals with spinal cord injury (SCI). Grounded-theory based qualitative item development methods, large-scale item calibration field testing, confirmatory factor analysis, and item response theory (IRT)-based psychometric analyses. Five SCI Model System centers and one Department of Veterans Affairs medical center in the United States. Adults with traumatic SCI. SCI-QOL Stigma Item Bank A sample of 611 individuals with traumatic SCI completed 30 items assessing SCI-related stigma. After 7 items were iteratively removed, factor analyses confirmed a unidimensional pool of items. Graded Response Model IRT analyses were used to estimate slopes and thresholds for the final 23 items. The SCI-QOL Stigma item bank is unique not only in the assessment of SCI-related stigma but also in the inclusion of individuals with SCI in all phases of its development. Use of confirmatory factor analytic and IRT methods provide flexibility and precision of measurement. The item bank may be administered as a CAT or as a 10-item fixed-length short form and can be used for research and clinical applications.
Development and psychometric characteristics of the SCI-QOL Pressure Ulcers scale and short form.

PubMed

Kisala, Pamela A; Tulsky, David S; Choi, Seung W; Kirshblum, Steven C

2015-05-01

To develop a self-reported measure of the subjective impact of pressure ulcers on health-related quality of life (HRQOL) in individuals with spinal cord injury (SCI) as part of the SCI quality of life (SCI-QOL) measurement system. Grounded-theory based qualitative item development methods, large-scale item calibration testing, confirmatory factor analysis (CFA), and item response theory-based psychometric analysis. Five SCI Model System centers and one Department of Veterans Affairs medical center in the United States. Adults with traumatic SCI. SCI-QOL Pressure Ulcers scale. 189 individuals with traumatic SCI who experienced a pressure ulcer within the past 7 days completed 30 items related to pressure ulcers. CFA confirmed a unidimensional pool of items. IRT analyses were conducted. A constrained Graded Response Model with a constant slope parameter was used to estimate item thresholds for the 12 retained items. The 12-item SCI-QOL Pressure Ulcers scale is unique in that it is specifically targeted to individuals with spinal cord injury and at every stage of development has included input from individuals with SCI. Furthermore, use of CFA and IRT methods provide flexibility and precision of measurement. The scale may be administered in its entirety or as a 7-item "short form" and is available for both research and clinical practice.
Measuring stigma after spinal cord injury: Development and psychometric characteristics of the SCI-QOL Stigma item bank and short form

PubMed Central

Kisala, Pamela A.; Tulsky, David S.; Pace, Natalie; Victorson, David; Choi, Seung W.; Heinemann, Allen W.

2015-01-01

Objective To develop a calibrated item bank and computer adaptive test (CAT) to assess the effects of stigma on health-related quality of life in individuals with spinal cord injury (SCI). Design Grounded-theory based qualitative item development methods, large-scale item calibration field testing, confirmatory factor analysis, and item response theory (IRT)-based psychometric analyses. Setting Five SCI Model System centers and one Department of Veterans Affairs medical center in the United States. Participants Adults with traumatic SCI. Main Outcome Measures SCI-QOL Stigma Item Bank Results A sample of 611 individuals with traumatic SCI completed 30 items assessing SCI-related stigma. After 7 items were iteratively removed, factor analyses confirmed a unidimensional pool of items. Graded Response Model IRT analyses were used to estimate slopes and thresholds for the final 23 items. Conclusions The SCI-QOL Stigma item bank is unique not only in the assessment of SCI-related stigma but also in the inclusion of individuals with SCI in all phases of its development. Use of confirmatory factor analytic and IRT methods provide flexibility and precision of measurement. The item bank may be administered as a CAT or as a 10-item fixed-length short form and can be used for research and clinical applications. PMID:26010973
Use, knowledge, and perception of the scientific contribution of Sci-Hub in medical students: Study in six countries in Latin America

PubMed Central

Mejia, Christian R.; Valladares-Garrido, Mario J.; Miñan-Tapia, Armando; Serrano, Felipe T.; Tobler-Gómez, Liz E.; Pereda-Castro, William; Mendoza-Flores, Cynthia R.; Mundaca-Manay, Maria Y.; Valladares-Garrido, Danai

2017-01-01

Introduction Sci-Hub is a useful web portal for people working in science as it provides access to millions of free scientific articles. Satisfaction and usage should be explored in the Latino student population. The objective of this study was to evaluate the use, knowledge, and perception of the scientific contribution of Sci-Hub in medical students from Latin America. Methodology A multicenter, observational, analytical study was conducted in 6632 medical students from 6 countries in Latin America. We surveyed from a previously validated instrument, delving into knowledge, monthly average usage, satisfaction level, and perception of the scientific contributions provided by Sci-Hub. Frequencies and percentages are described, and generalized linear models were used to establish statistical associations. Results Only 19.2% of study participants knew of Sci-Hub and its function, while the median use was twice a month. 29.9% of Sci-Hub-aware participants claimed they always find the desired scientific information in their Sci-Hub search; 62.5% of participants affirmed that Sci-Hub contributes to scientific investigation; only 2.2% reported that Sci-Hub does not contribute to science. Conclusion The majority of Latino students are not aware of Sci-Hub. PMID:28982181
Sleep disordered breathing in chronic spinal cord injury.

PubMed

Sankari, Abdulghani; Bascom, Amy; Oomman, Sowmini; Badr, M Safwan

2014-01-15

Spinal cord injury (SCI) is associated with 2-5 times greater prevalence of sleep disordered breathing (SDB) than the general population. The contribution of SCI on sleep and breathing at different levels of injury using two scoring methods has not been assessed. The objectives of this study were to characterize the sleep disturbances in the SCI population and the associated physiological abnormalities using quantitative polysomnography and to determine the contribution of SCI level on the SDB mechanism. We studied 26 consecutive patients with SCI (8 females; age 42.5 ± 15.5 years; BMI 25.9 ± 4.9 kg/m2; 15 cervical and 11 thoracic levels) by spirometry, a battery of questionnaires and by attended polysomnography with flow and pharyngeal pressure measurements. Inclusion criteria for SCI: chronic SCI (> 6 months post injury), level T6 and above and not on mechanical ventilation. Ventilation, end-tidal CO2 (PETCO2), variability in minute ventilation (VI-CV) and upper airway resistance (RUA) were monitored during wakefulness and NREM sleep in all subjects. Each subject completed brief history and exam, Epworth Sleepiness Scale (ESS), Pittsburgh Sleep Quality Index (PSQI), Berlin questionnaire (BQ) and fatigue severity scale (FSS). Sleep studies were scored twice, first using standard 2007 American Academy of Sleep Medicine (AASM) criteria and second using new 2012 recommended AASM criteria. Mean PSQI was increased to 10.3 ± 3.7 in SCI patients and 92% had poor sleep quality. Mean ESS was increased 10.4 ± 4.4 in SCI patients and excessive daytime sleepiness (ESS ≥ 10) was present in 59% of the patients. Daytime fatigue (FSS > 20) was reported in 96% of SCI, while only 46% had high-risk score of SDB on BQ. Forced vital capacity (FVC) in SCI was reduced to 70.5% predicted in supine compared to 78.5% predicted in upright positions (p < 0.05). Likewise forced expiratory volume in first second (FEV1) was 64.9% predicted in supine compared to 74.7% predicted in upright positions (p < 0.05). Mean AHI in SCI patients was 29.3 ± 25.0 vs. 20.0 ± 22.8 events/h using the new and conventional AASM scoring criteria, respectively (p < 0.001). SCI patients had SDB (AHI > 5 events/h) in 77% of the cases using the new AASM scoring criteria compared to 65% using standard conventional criteria (p < 0.05). In cervical SCI, VI decreased from 7.2 ± 1.6 to 5.5 ± 1.3 L/min, whereas PETCO2 and VI-CV, increased during sleep compared to thoracic SCI. The majority of SCI survivors have symptomatic SDB and poor sleep that may be missed if not carefully assessed. Decreased VI and increased PETCO2 during sleep in patients with cervical SCI relative to thoracic SCI suggests that sleep related hypoventilation may contribute to the pathogenesis SDB in patients with chronic cervical SCI.
Potential of personal health record portals in the care of individuals with spinal cord injuries and disorders: Provider perspectives.

PubMed

Hill, Jennifer N; Smith, Bridget M; Weaver, Frances M; Nazi, Kim M; Thomas, Florian P; Goldstein, Barry; Hogan, Timothy P

2018-05-01

Although personal health record (PHR) portals are designed for patients, healthcare providers are a key influence in how patients use their features and realize benefits from them. A few studies have examined provider attitudes toward PHR portals, but none have focused on those who care for individuals with spinal cord injuries and disorders (SCI/D). We characterize SCI/D provider perspectives of PHR portals, including perceived advantages and disadvantages of PHR portal use in SCI/D care. Cross-sectional; semi-structured interviews. Spinal Cord Injury (SCI) Centers in the Veterans Health Administration. Twenty-six SCI/D healthcare providers. None. Perceived advantages and disadvantages of PHR portals. The complex situations of individuals with SCI/D shaped provider perspectives of PHR portals and their potential role in practice. Perceived advantages of PHR portal use in SCI/D care included the ability to coordinate information and care, monitor and respond to outpatient requests, support patient self-management activities, and provide reliable health information to patients. Perceived disadvantages of PHR portal use in SCI/D care included concerns about the quality of patient-generated health data, other potential liabilities for providers and workload burden, and the ability of individuals with SCI/D to understand clinical information accessed through a portal. Our study highlights advantages and disadvantages that should be considered when promoting engagement of SCI/D healthcare providers in use of PHR portals, and portal features that may have the most utility in SCI/D care.
Circulating sclerostin is elevated in short-term and reduced in long-term SCI.

PubMed

Battaglino, Ricardo A; Sudhakar, Supreetha; Lazzari, Antonio A; Garshick, Eric; Zafonte, Ross; Morse, Leslie R

2012-09-01

Spinal cord injury (SCI) causes profound bone loss due to muscle paralysis resulting in the inability to walk. Sclerostin, a Wnt signaling pathway antagonist produced by osteocytes, is a potent inhibitor of bone formation. Short-term studies in rodent models have demonstrated increased sclerostin in response to mechanical unloading that is reversed with reloading. Although sclerostin inhibition has been proposed as a potential therapy for bone loss, it is not known if sclerostin levels vary with duration of SCI in humans. We analyzed circulating sclerostin in 155 men with varying degrees of SCI who were 1 year or more post-injury. We report that sclerostin levels are greatest in subjects with short-term SCI (≤5 years post-injury) and decrease significantly over the first 5 years post-injury. There was no association between sclerostin and injury duration in subjects with long-term SCI (>5 years post-injury). In subjects with long-term SCI, sclerostin levels were positively associated with lower extremity bone density and bone mineral content. These data suggest that sclerostin levels are initially increased after SCI in response to mechanical unloading. This response is time-limited and as bone loss progresses, circulating sclerostin is lowest in subjects with severe osteoporosis. These findings support a dual role for sclerostin after SCI: a therapeutic target in acute SCI, and a biomarker of osteoporosis severity in chronic SCI. Copyright © 2012 Elsevier Inc. All rights reserved.
Curcumin Increase the Expression of Neural Stem/Progenitor Cells and Improves Functional Recovery after Spinal Cord Injury

PubMed Central

Bang, Woo-Seok; Kim, Kyoung-Tae; Seo, Ye Jin; Cho, Dae-Chul; Sung, Joo-Kyung; Kim, Chi Heon

2018-01-01

Objective To investigates the effect of curcumin on proliferation of spinal cord neural stem/progenitor cells (SC-NSPCs) and functional outcome in a rat spinal cord injury (SCI) model. Methods Sixty adult male Sprague-Dawley rats were randomly and blindly allocated into three groups (sham control group; curcumin treated group after SCI; vehicle treated group after SCI). Functional recovery was evaluated by the Basso, Beattie, and Bresnahan (BBB) scale during 6 weeks after SCI. The expression of SC-NSPC proliferation and astrogliosis were analyzed by nestin/Bromodeoxyuridine (BrdU) and Glial fibrillary acidic protein (GFAP) staining. The injured spinal cord was then examined histologically, including quantification of cavitation. Results The BBB score of the SCI-curcumin group was better than that of SCI-vehicle group up to 14 days (p<0.05). The co-immunoreactivity of nestin/BrdU in the SCI-curcumin group was much higher than that of the SCI-vehicle group 1 week after surgery (p<0.05). The GFAP immunoreactivity of the SCI-curcumin group was remarkably lower than that of the SCI-vehicle group 4 weeks after surgery (p<0.05). The lesion cavity was significantly reduced in the curcumin group as compared to the control group (p<0.05). Conclusion These results indicate that curcumin could increase the expression of SC-NSPCs, and reduce the activity of reactive astrogliosis and lesion cavity. Consequently curcumin could improve the functional recovery after SCI via SC-NSPC properties. PMID:29354231
Gene-activated fat grafts for the repair of spinal cord injury: a pilot study.

PubMed

Betz, Volker M; Sitoci-Ficici, K Hakan; Uckermann, Ortrud; Leipnitz, Elke; Iltzsche, Anne; Thirion, Christian; Salomon, Michael; Zwipp, Hans; Schackert, Gabriele; Betz, Oliver B; Kirsch, Matthias

2016-02-01

Spinal cord injury (SCI) is a complex disease requiring a concerted multi-target approach. The most appropriate combination of therapeutic gene, cellular vehicle, and space filling scaffold still has to be determined. We present an approach that employs syngeneic adipose tissue serving as a three-dimensional biological implant, source of progenitor cells, and delivery system for therapeutic genes. In this pilot experiment, we evaluated the feasibility and short-term effects using gene-activated autologous fat grafts after SCI. An experimental SCI model was established in syngeneic Fischer 344 rats by a T9-T10 hemimyelonectomy. Fat tissue was harvested from two donor rats. Animals were divided into four groups and treated with either (i) fat grafts activated by an adenoviral vector carrying the human NT-3 cDNA, (ii) or BDNF, (iii) or with untreated fat grafts or (iv) remained untreated. Animals were euthanized either 7 or 21 days after surgery, and spinal cord tissue was investigated by histological and immunohistochemical methods. NT-3 and BDNF were produced by gene-activated fat grafts for at least 21 days in vitro and in vivo. Fat tissue grafts remained stable at the site of implantation at 7 days and at 21 days. Neither BDNF-activated nor NT-3-activated fat graft had a detectable limiting effect on the neuronal degeneration. BDNF recruited microglia to perilesional site and attenuated their inflammatory response. Gene-activated syngeneic fat tissue serves as a three-dimensional biological material delivering therapeutic molecules to the site of SCI over an extended period of time. The BDNF-fat graft attenuated the inflammatory response. Whether these findings translate into functional recovery will require extended observation times.
Halogen content in Lesser Antilles arc volcanic rocks : exploring subduction recycling

NASA Astrophysics Data System (ADS)

Thierry, Pauline; Villemant, Benoit; Caron, Benoit

2016-04-01

Halogens (F, Cl, Br and I) are strongly reactive volatile elements which can be used as tracers of igneous processes, through mantle melting, magma differentiation and degassing or crustal material recycling into mantle at subduction zones. Cl, Br and I are higly incompatible during partial melting or fractional cristallization and strongly depleted in melts by H2O degassing, which means that no Cl-Br-I fractionation is expected through magmatic differenciation [current thesis]. Thus, Cl/Br/I ratios in lavas reflect the halogen content of their mantle sources. Whereas these ratios seemed quite constant (e.g. Cl/Br =300 as seawater), recent works suggest significant variations in arc volcanism [1,2]. In this work we provide high-precision halogen measurements in volcanic rocks from the recent activity of the Lesser Antilles arc (Montserrat, Martinique, Guadeloupe, Dominique). Halogen contents of powdered samples were determined through extraction in solution by pyrohydrolysis and analysed by Ion Chromatography for F and Cl and high performance ICP-MS (Agilent 8800 Tripe Quad) for Cl, Br and I [3,4]. We show that lavas - and mantle sources - display significant vraiations in Cl/Br/I ratios along the Lesser Antilles arc. These variations are compared with Pb, Nd and Sr isotopes and fluid-mobile elements (Ba, U, Sr, Pb etc.) compositions which vary along the arc from a nothern ordinary arc compositions to a southern 'crustal-like' composition [5,6]. These characteristics are attributed to subducted sediments recycling into the mantle wedge, whose contribution vary along the arc from north to south [7,8]. The proportion of added sediments is also related to the distance to the trench as sediment melting and slab dehydration may occur depending on the slab depth [9]. Further Cl-Br-I in situ measurements by LA-ICP-MS in Lesser Antilles arc lavas melt inclusions will be performed, in order to provide better constraints on the deep halogen recycling cycle from crust to mantle. 1. Villemant, B., Mouatt, J. & Michel, A., 2008. Earth Planet. Sci. Lett. 269(1), 212-229. 2. Kutterolf, S. et al., 2015. Earth Planet. Sci. Lett. 429, 234-246. 3. Michel, A. & Villemant, B., 2003. Geostand. Geoanalytical Res. 27(2), 163-171. 4. Balcone-Boissard, H., Michel, A. & Villemant, B., 2009. Geostand. Geoanalytical Res. 33(4), 477-485. 5. White, W. M. & Dupré, B., 1986. J. Geophys. Res. 91(B6), 5927. 6. Labanieh, S. et al., 2010. Earth Planet. Sci. Lett. 298(1-2), 35-46. 7. Turner, S. et al., 1996. Earth Planet. Sci. Lett. 142(1-2), 191-207. 8. Carpentier, M., Chauvel, C. & Mattielli, N., 2008. Earth Planet. Sci. Lett. 272(1-2), 199-211. 9. Labanieh, S. et al., 2012. J. Petrol. 53(12), 2441-2464.
Spinal Cord Injury Impairs Cardiovascular Capacity in Elite Wheelchair Rugby Athletes.

PubMed

Gee, Cameron M; Currie, Katharine D; Phillips, Aaron A; Squair, Jordan W; Krassioukov, Andrei V

2017-12-19

To examine differences in heart rate (HR) responses during international wheelchair rugby competition between athletes with and without a cervical spinal cord injury (SCI) and across standardized sport classifications. Observational study. The 2015 Parapan American Games wheelchair rugby competition. Forty-three male athletes (31 ± 8 years) with a cervical SCI (n = 32) or tetraequivalent impairment (non-SCI, n = 11). Average and peak HR (HRavg and HRpeak, respectively). To characterize HR responses in accordance with an athletes' International Wheelchair Rugby Federation (IWRF) classification, we separated athletes into 3 groups: group I (IWRF classification 0.5-1.5, n = 15); group II (IWRF classification 2.0, n = 15); and group III (IWRF classification 2.5-3.5, n = 13). Athletes with SCI had lower HRavg (111 ± 14 bpm vs 155 ± 13 bpm) and HRpeak (133 ± 12 bpm vs 178 ± 13 bpm) compared with non-SCI (both P < 0.001). Average HR was higher in group III than in I (136 ± 25 bpm vs 115 ± 20 bpm, P = 0.045); however, SCI athletes showed no difference in HRavg or HRpeak between groups. Within group III, SCI athletes had lower HRavg (115 ± 6 bpm vs 160 ± 8 bpm) and HRpeak (135 ± 11 bpm vs 183 ± 11 bpm) than non-SCI athletes (both P < 0.001). This study is the first to demonstrate attenuated HR responses during competition in SCI compared with non-SCI athletes, likely due to injury to spinal autonomic pathways. Among athletes with SCI, IWRF classification was not related to differences in HR. Specific assessment of autonomic function after SCI may be able to predict HR during competition and consideration of autonomic impairments may improve the classification process.
Understanding Quality of Life in Adults with Spinal Cord Injury Via SCI-Related Needs and Secondary Complications.

PubMed

Sweet, Shane N; Noreau, Luc; Leblond, Jean; Dumont, Frédéric S

2014-01-01

Understanding the factors that can predict greater quality of life (QoL) is important for adults with spinal cord injury (SCI), given that they report lower levels of QoL than the general population. To build a conceptual model linking SCI-related needs, secondary complications, and QoL in adults with SCI. Prior to testing the conceptual model, we aimed to develop and evaluate the factor structure for both SCI-related needs and secondary complications. Individuals with a traumatic SCI (N = 1,137) responded to an online survey measuring 13 SCI-related needs, 13 secondary complications, and the Life Satisfaction Questionnaire to assess QoL. The SCI-related needs and secondary complications were conceptualized into factors, tested with a confirmatory factor analysis, and subsequently evaluated in a structural equation model to predict QoL. The confirmatory factor analysis supported a 2-factor model for SCI related needs, χ(2)(61, N = 1,137) = 250.40, P <.001, comparative fit index (CFI) = .93, root mean square error of approximation (RMSEA) = .05, standardized root mean square residual (SRMR) = .04, and for 11 of the 13 secondary complications, χ(2)(44, N = 1,137) = 305.67, P < .001, CFI = .91, RMSEA = .060, SRMR = .033. The final 2 secondary complications were kept as observed constructs. In the structural model, both vital and personal development unmet SCI-related needs (β = -.22 and -.20, P < .05, respectively) and the neuro-physiological systems factor (β = -.45, P < .05) were negatively related with QoL. Identifying unmet SCI-related needs of individuals with SCI and preventing or managing secondary complications are essential to their QoL.
Methodology for the development and calibration of the SCI-QOL item banks

PubMed Central

Tulsky, David S.; Kisala, Pamela A.; Victorson, David; Choi, Seung W.; Gershon, Richard; Heinemann, Allen W.; Cella, David

2015-01-01

Objective To develop a comprehensive, psychometrically sound, and conceptually grounded patient reported outcomes (PRO) measurement system for individuals with spinal cord injury (SCI). Methods Individual interviews (n = 44) and focus groups (n = 65 individuals with SCI and n = 42 SCI clinicians) were used to select key domains for inclusion and to develop PRO items. Verbatim items from other cutting-edge measurement systems (i.e. PROMIS, Neuro-QOL) were included to facilitate linkage and cross-population comparison. Items were field tested in a large sample of individuals with traumatic SCI (n = 877). Dimensionality was assessed with confirmatory factor analysis. Local item dependence and differential item functioning were assessed, and items were calibrated using the item response theory (IRT) graded response model. Finally, computer adaptive tests (CATs) and short forms were administered in a new sample (n = 245) to assess test-retest reliability and stability. Participants and Procedures A calibration sample of 877 individuals with traumatic SCI across five SCI Model Systems sites and one Department of Veterans Affairs medical center completed SCI-QOL items in interview format. Results We developed 14 unidimensional calibrated item banks and 3 calibrated scales across physical, emotional, and social health domains. When combined with the five Spinal Cord Injury – Functional Index physical function banks, the final SCI-QOL system consists of 22 IRT-calibrated item banks/scales. Item banks may be administered as CATs or short forms. Scales may be administered in a fixed-length format only. Conclusions The SCI-QOL measurement system provides SCI researchers and clinicians with a comprehensive, relevant and psychometrically robust system for measurement of physical-medical, physical-functional, emotional, and social outcomes. All SCI-QOL instruments are freely available on Assessment CenterSM. PMID:26010963
Methodology for the development and calibration of the SCI-QOL item banks.

PubMed

Tulsky, David S; Kisala, Pamela A; Victorson, David; Choi, Seung W; Gershon, Richard; Heinemann, Allen W; Cella, David

2015-05-01

To develop a comprehensive, psychometrically sound, and conceptually grounded patient reported outcomes (PRO) measurement system for individuals with spinal cord injury (SCI). Individual interviews (n=44) and focus groups (n=65 individuals with SCI and n=42 SCI clinicians) were used to select key domains for inclusion and to develop PRO items. Verbatim items from other cutting-edge measurement systems (i.e. PROMIS, Neuro-QOL) were included to facilitate linkage and cross-population comparison. Items were field tested in a large sample of individuals with traumatic SCI (n=877). Dimensionality was assessed with confirmatory factor analysis. Local item dependence and differential item functioning were assessed, and items were calibrated using the item response theory (IRT) graded response model. Finally, computer adaptive tests (CATs) and short forms were administered in a new sample (n=245) to assess test-retest reliability and stability. A calibration sample of 877 individuals with traumatic SCI across five SCI Model Systems sites and one Department of Veterans Affairs medical center completed SCI-QOL items in interview format. We developed 14 unidimensional calibrated item banks and 3 calibrated scales across physical, emotional, and social health domains. When combined with the five Spinal Cord Injury--Functional Index physical function banks, the final SCI-QOL system consists of 22 IRT-calibrated item banks/scales. Item banks may be administered as CATs or short forms. Scales may be administered in a fixed-length format only. The SCI-QOL measurement system provides SCI researchers and clinicians with a comprehensive, relevant and psychometrically robust system for measurement of physical-medical, physical-functional, emotional, and social outcomes. All SCI-QOL instruments are freely available on Assessment CenterSM.
The role of capsaicin-sensitive C-fiber afferent pathways in the control of micturition in spinal-intact and spinal cord-injured mice.

PubMed

Kadekawa, Katsumi; Majima, Tsuyoshi; Shimizu, Takahiro; Wada, Naoki; de Groat, William C; Kanai, Anthony J; Goto, Momokazu; Yoshiyama, Mitsuharu; Sugaya, Kimio; Yoshimura, Naoki

2017-09-01

We examined bladder and urethral sphincter activity in mice with or without spinal cord injury (SCI) after C-fiber afferent desensitization induced by capsaicin pretreatment and changes in electrophysiological properties of mouse bladder afferent neurons 4 wk after SCI. Female C57BL/6N mice were divided into four groups: 1 ) spinal intact (SI)-control, 2 ) SI-capsaicin pretreatment (Cap), 3 ) SCI-control, and 4 ) SCI-Cap groups. Continuous cystometry and external urethral sphincter (EUS)-electromyogram (EMG) were conducted under an awake condition. In the Cap groups, capsaicin (25, 50, or 100 mg/kg) was injected subcutaneously 4 days before the experiments. In the SI-Cap group, 100 mg/kg capsaicin pretreatment significantly increased bladder capacity and decreased the silent period duration of EUS/EMG compared with the SI-control group. In the SCI-Cap group, 50 and 100 mg/kg capsaicin pretreatment decreased the number of nonvoiding contractions (NVCs) and the duration of reduced EUS activity during voiding, respectively, compared with the SCI-control group. In SCI mice, hexamethonium, a ganglionic blocker, almost completely blocked NVCs, suggesting that they are of neurogenic origin. Patch-clamp recordings in capsaicin-sensitive bladder afferent neurons from SCI mice showed hyperexcitability, which was evidenced by decreased spike thresholds and increased firing rate compared with SI mice. These results indicate that capsaicin-sensitive C-fiber afferent pathways, which become hyperexcitable after SCI, can modulate bladder and urethral sphincter activity in awake SI and SCI mice. Detrusor overactivity as shown by NVCs in SCI mice is significantly but partially dependent on capsaicin-sensitive C-fiber afferents, whereas the EUS relaxation during voiding is enhanced by capsaicin-sensitive C-fiber bladder afferents in SI and SCI mice. Copyright © 2017 the American Physiological Society.
Investigation of Microbiota Alterations and Intestinal Inflammation Post-Spinal Cord Injury in Rat Model.

PubMed

O'Connor, Gregory; Jeffrey, Elisabeth; Madorma, Derik; Marcillo, Alexander; Abreu, Maria T; Deo, Sapna K; Dietrich, W Dalton; Daunert, Sylvia

2018-06-07

Although there has been a significant amount of research focused on the pathophysiology of spinal cord injury (SCI), there is limited information on the consequences of SCI on remote organs. SCI can produce significant effects on a variety of organ systems, including the gastrointestinal tract. Patients with SCI often suffer from severe, debilitating bowel dysfunction in addition to their physical disabilities, which is of major concern for these individuals because of the adverse impact on their quality of life. Herein, we report on our investigation into the effects of SCI and subsequent antibiotic treatment on the intestinal tissue and microbiota. For that, we used a thoracic SCI rat model and investigated changes to the microbiota, proinflammatory cytokine levels, and bacterial communication molecule levels post-injury and gentamicin treatment for 7 days. We discovered significant changes, the most interesting being the differences in the gut microbiota beta diversity of 8-week SCI animals compared to control animals at the family, genus, and species level. Specifically, 35 operational taxonomic units were enriched in the SCI animal group and three were identified at species level; Lactobacillus intestinalis, Clostridium disporicum, and Bifidobacterium choerinum. In contrast, Clostridium saccharogumia was identified as depleted in the SCI animal group. Proinflammatory cytokines interleukin (IL)-12, macrophage inflammatory protein-2 (MIP-2), and tumor necrosis factor alpha were found to be significantly elevated in intestinal tissue homogenate 4 weeks post-SCI compared to 8-weeks post-injury. Further, levels of IL-1β, IL-12, and MIP-2 significantly correlated with changes in beta diversity 8-weeks post-SCI. Our data provide a greater understanding of the early effects of SCI on the microbiota and gastrointestinal tract, highlighting the need for further investigation to elucidate the mechanism underlying these effects.
The Role of Scientific Communication Skills in Trainees' Intention to Pursue Biomedical Research Careers: A Social Cognitive Analysis.

PubMed

Cameron, Carrie; Lee, Hwa Young; Anderson, Cheryl; Byars-Winston, Angela; Baldwin, Constance D; Chang, Shine

2015-01-01

Scientific communication (SciComm) skills are indispensable for success in biomedical research, but many trainees may not have fully considered the necessity of regular writing and speaking for research career progression. Our purpose was to investigate the relationship between SciComm skill acquisition and research trainees' intentions to remain in research careers. We used social cognitive career theory (SCCT) to test a model of the relationship of SciComm skills to SciComm-related cognitive variables in explaining career intentions. A sample of 510 graduate students and postdoctoral fellows at major academic health science centers in the Texas Medical Center, Houston, Texas, were surveyed online. Results suggested that interest in performing SciComm tasks, SciComm outcome expectations (SCOEs), and SciComm productivity predicted intention to remain in a research career, while SciComm self-efficacy did not directly predict career intention. SCOEs also predicted interest in performing SciComm tasks. As in other SCCT studies, SciComm self-efficacy predicted SCOEs. We conclude that social cognitive factors of SciComm skill acquisition and SciComm productivity significantly predict biomedical trainees' intentions to pursue research careers whether within or outside academia. While further studies are needed, these findings may lead to evidence-based interventions to help trainees remain in their chosen career paths. © 2015 C. Cameron et al. CBE—Life Sciences Education © 2015 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).
An efficient and accurate approach to MTE-MART for time-resolved tomographic PIV

NASA Astrophysics Data System (ADS)

Lynch, K. P.; Scarano, F.

2015-03-01

The motion-tracking-enhanced MART (MTE-MART; Novara et al. in Meas Sci Technol 21:035401, 2010) has demonstrated the potential to increase the accuracy of tomographic PIV by the combined use of a short sequence of non-simultaneous recordings. A clear bottleneck of the MTE-MART technique has been its computational cost. For large datasets comprising time-resolved sequences, MTE-MART becomes unaffordable and has been barely applied even for the analysis of densely seeded tomographic PIV datasets. A novel implementation is proposed for tomographic PIV image sequences, which strongly reduces the computational burden of MTE-MART, possibly below that of regular MART. The method is a sequential algorithm that produces a time-marching estimation of the object intensity field based on an enhanced guess, which is built upon the object reconstructed at the previous time instant. As the method becomes effective after a number of snapshots (typically 5-10), the sequential MTE-MART (SMTE) is most suited for time-resolved sequences. The computational cost reduction due to SMTE simply stems from the fewer MART iterations required for each time instant. Moreover, the method yields superior reconstruction quality and higher velocity field measurement precision when compared with both MART and MTE-MART. The working principle is assessed in terms of computational effort, reconstruction quality and velocity field accuracy with both synthetic time-resolved tomographic images of a turbulent boundary layer and two experimental databases documented in the literature. The first is the time-resolved data of flow past an airfoil trailing edge used in the study of Novara and Scarano (Exp Fluids 52:1027-1041, 2012); the second is a swirling jet in a water flow. In both cases, the effective elimination of ghost particles is demonstrated in number and intensity within a short temporal transient of 5-10 frames, depending on the seeding density. The increased value of the velocity space-time correlation coefficient demonstrates the increased velocity field accuracy of SMTE compared with MART.
Turbulent motion of mass flows. Mathematical modeling

NASA Astrophysics Data System (ADS)

Eglit, Margarita; Yakubenko, Alexander; Yakubenko, Tatiana

2016-04-01

New mathematical models for unsteady turbulent mass flows, e.g., dense snow avalanches and landslides, are presented. Such models are important since most of large scale flows are turbulent. In addition to turbulence, the two other important points are taken into account: the entrainment of the underlying material by the flow and the nonlinear rheology of moving material. The majority of existing models are based on the depth-averaged equations and the turbulent character of the flow is accounted by inclusion of drag proportional to the velocity squared. In this paper full (not depth-averaged) equations are used. It is assumed that basal entrainment takes place if the bed friction equals the shear strength of the underlying layer (Issler D, M. Pastor Peréz. 2011). The turbulent characteristics of the flow are calculated using a three-parameter differential model (Lushchik et al., 1978). The rheological properties of moving material are modeled by one of the three types of equations: 1) Newtonian fluid with high viscosity, 2) power-law fluid and 3) Bingham fluid. Unsteady turbulent flows down long homogeneous slope are considered. The flow dynamical parameters and entrainment rate behavior in time as well as their dependence on properties of moving and underlying materials are studied numerically. REFERENCES M.E. Eglit and A.E. Yakubenko, 2014. Numerical modeling of slope flows entraining bottom material. Cold Reg. Sci. Technol., 108, 139-148 Margarita E. Eglit and Alexander E. Yakubenko, 2016. The effect of bed material entrainment and non-Newtonian rheology on dynamics of turbulent slope flows. Fluid Dynamics, 51(3) Issler D, M. Pastor Peréz. 2011. Interplay of entrainment and rheology in snow avalanches; a numerical study. Annals of Glaciology, 52(58), 143-147 Lushchik, V.G., Paveliev, A.A. , and Yakubenko, A.E., 1978. Three-parameter model of shear turbulence. Fluid Dynamics, 13, (3), 350-362
Hydrophilic PEO-PDMS for microfluidic applications

NASA Astrophysics Data System (ADS)

Yao, Mingjin; Fang, Ji

2012-02-01

Polydimethylsiloxane (PDMS) is a popularly used nontoxic and biocompatible material in microfluidic systems, which is relatively cheap and does not break easily like glass. The simple fabrication, optical transparency and elastomeric property make PDMS a handy material to work with. In order to develop different applications of PDMS in microfluidics and bioengineering, it is necessary to modify the PDMS surface nature to improve wetting characteristics, and to have a better control in nonspecific binding of proteins and cells, as well as to increase adhesion. At the moment, the hydrophilic surface modification performance of PDMS is known to recover its hydrophobicity shortly after oxidation modification, which is not stable in the long term (Owen and Smith 1994 J. Adhes. Sci. Technol. 8 1063-75). This paper presents a long-term stable hydrophilic surface modification processing of PDMS. The poly(dimethylsiloxane-ethylene oxide polymeric) (PDMS-b-PEO) is used in this project as a surfactant additive to be added into the PDMS base and the curing agent mixture during polymerization and to create hydrophilic PEO-PDMS. The contact angle can be controlled at 21.5-80.9° with the different mixing ratios and the hydrophilicity will remain stable for two months and then slightly varied later. We also investigate the bonding conditions of the modified PDMS to a silicon wafer and a glass wafer. To demonstrate its applications, we designed a device which consists of microchannels on a silicon wafer, and PEO-PDMS is utilized as a cover sheet. The capillary function was investigated under the different contact angles of PED-PDMS and with different aspect ratios of microchannels. All of the processes and testing data are presented in detail. This easy and cost-effective modified PDMS with a good bonding property can be widely used in the capillary device and systems, and microfluidic devices for fluid flow control of the microchannels in biological, chemical, medical applications.

The electrical resistivity of rough thin films: A model based on electron reflection at discrete step edges

NASA Astrophysics Data System (ADS)

Zhou, Tianji; Zheng, Pengyuan; Pandey, Sumeet C.; Sundararaman, Ravishankar; Gall, Daniel

2018-04-01

The effect of the surface roughness on the electrical resistivity of metallic thin films is described by electron reflection at discrete step edges. A Landauer formalism for incoherent scattering leads to a parameter-free expression for the resistivity contribution from surface mound-valley undulations that is additive to the resistivity associated with bulk and surface scattering. In the classical limit where the electron reflection probability matches the ratio of the step height h divided by the film thickness d, the additional resistivity Δρ = √{3 /2 } /(g0d) × ω/ξ, where g0 is the specific ballistic conductance and ω/ξ is the ratio of the root-mean-square surface roughness divided by the lateral correlation length of the surface morphology. First-principles non-equilibrium Green's function density functional theory transport simulations on 1-nm-thick Cu(001) layers validate the model, confirming that the electron reflection probability is equal to h/d and that the incoherent formalism matches the coherent scattering simulations for surface step separations ≥2 nm. Experimental confirmation is done using 4.5-52 nm thick epitaxial W(001) layers, where ω = 0.25-1.07 nm and ξ = 10.5-21.9 nm are varied by in situ annealing. Electron transport measurements at 77 and 295 K indicate a linear relationship between Δρ and ω/(ξd), confirming the model predictions. The model suggests a stronger resistivity size effect than predictions of existing models by Fuchs [Math. Proc. Cambridge Philos. Soc. 34, 100 (1938)], Sondheimer [Adv. Phys. 1, 1 (1952)], Rossnagel and Kuan [J. Vac. Sci. Technol., B 22, 240 (2004)], or Namba [Jpn. J. Appl. Phys., Part 1 9, 1326 (1970)]. It provides a quantitative explanation for the empirical parameters in these models and may explain the recently reported deviations of experimental resistivity values from these models.
Particulate matter in new technology diesel exhaust (NTDE) is quantitatively and qualitatively very different from that found in traditional diesel exhaust (TDE).

PubMed

Hesterberg, Thomas W; Long, Christopher M; Sax, Sonja N; Lapin, Charles A; McClellan, Roger O; Bunn, William B; Valberg, Peter A

2011-09-01

Diesel exhaust (DE) characteristic of pre-1988 engines is classified as a "probable" human carcinogen (Group 2A) by the International Agency for Research on Cancer (IARC), and the U.S. Environmental Protection Agency has classified DE as "likely to be carcinogenic to humans." These classifications were based on the large body of health effect studies conducted on DE over the past 30 or so years. However, increasingly stringent U.S. emissions standards (1988-2010) for particulate matter (PM) and nitrogen oxides (NOx) in diesel exhaust have helped stimulate major technological advances in diesel engine technology and diesel fuel/lubricant composition, resulting in the emergence of what has been termed New Technology Diesel Exhaust, or NTDE. NTDE is defined as DE from post-2006 and older retrofit diesel engines that incorporate a variety of technological advancements, including electronic controls, ultra-low-sulfur diesel fuel, oxidation catalysts, and wall-flow diesel particulate filters (DPFs). As discussed in a prior review (T. W. Hesterberg et al.; Environ. Sci. Technol. 2008, 42, 6437-6445), numerous emissions characterization studies have demonstrated marked differences in regulated and unregulated emissions between NTDE and "traditional diesel exhaust" (TDE) from pre-1988 diesel engines. Now there exist even more data demonstrating significant chemical and physical distinctions between the diesel exhaust particulate (DEP) in NTDE versus DEP from pre-2007 diesel technology, and its greater resemblance to particulate emissions from compressed natural gas (CNG) or gasoline engines. Furthermore, preliminary toxicological data suggest that the changes to the physical and chemical composition of NTDE lead to differences in biological responses between NTDE versus TDE exposure. Ongoing studies are expected to address some of the remaining data gaps in the understanding of possible NTDE health effects, but there is now sufficient evidence to conclude that health effects studies of pre-2007 DE likely have little relevance in assessing the potential health risks of NTDE exposures.
Revisiting the cape cod bacteria injection experiment using a stochastic modeling approach

USGS Publications Warehouse

Maxwell, R.M.; Welty, C.; Harvey, R.W.

2007-01-01

Bromide and resting-cell bacteria tracer tests conducted in a sandy aquifer at the U.S. Geological Survey Cape Cod site in 1987 were reinterpreted using a three-dimensional stochastic approach. Bacteria transport was coupled to colloid filtration theory through functional dependence of local-scale colloid transport parameters upon hydraulic conductivity and seepage velocity in a stochastic advection - dispersion/attachment - detachment model. Geostatistical information on the hydraulic conductivity (K) field that was unavailable at the time of the original test was utilized as input. Using geostatistical parameters, a groundwater flow and particle-tracking model of conservative solute transport was calibrated to the bromide-tracer breakthrough data. An optimization routine was employed over 100 realizations to adjust the mean and variance ofthe natural-logarithm of hydraulic conductivity (InK) field to achieve best fit of a simulated, average bromide breakthrough curve. A stochastic particle-tracking model for the bacteria was run without adjustments to the local-scale colloid transport parameters. Good predictions of mean bacteria breakthrough were achieved using several approaches for modeling components of the system. Simulations incorporating the recent Tufenkji and Elimelech (Environ. Sci. Technol. 2004, 38, 529-536) correlation equation for estimating single collector efficiency were compared to those using the older Rajagopalan and Tien (AIChE J. 1976, 22, 523-533) model. Both appeared to work equally well at predicting mean bacteria breakthrough using a constant mean bacteria diameter for this set of field conditions. Simulations using a distribution of bacterial cell diameters available from original field notes yielded a slight improvement in the model and data agreement compared to simulations using an average bacterial diameter. The stochastic approach based on estimates of local-scale parameters for the bacteria-transport process reasonably captured the mean bacteria transport behavior and calculated an envelope of uncertainty that bracketed the observations in most simulation cases. ?? 2007 American Chemical Society.
Repeated helicopter-based surveys of fugitive hydrocarbon emissions from tight oil operations: Persistence and driving factors

NASA Astrophysics Data System (ADS)

Englander, J. G.; Brandt, A. R.; Jackson, R. B.; Alvarez, R.; Lyon, D. R.

2016-12-01

A recent study used helicopters and optical gas imaging (infrared-based) to study hydrocarbon leaks [1] across numerous oil and gas producing basins. The appearance of leaks appeared to have small statistical correlations with factors such as age of wells, production rate, or water production. However, there have not been few if any attempts to observe the presence of leaks over time. In this work, we used the same helicopter-based optical gas imaging techniques to revisit wells in the Bakken formation that had previously been measured in 2014 [1] In this study, we visited 353 of the total 683 well pads in Bakken from the original study, and we also visited 50 randomly selected well pads that were newly developed between studies. We first examine the presence of leaks as a function of different factors, including: operator, number of wells, tanks, and treaters on a well pad; and numerous other possible emissions drivers. In addition, using the previous years observations as our prior, we conducted a Bayesian analysis to determine the likelihood of finding a leaking or non-leaking well pad and compared the observations to a Monte Carlo simulation of randomly distributed leaks. We find that the overall prevalence of observed emissions was similar for each year (11% for 2014 observations and 10% for 2015 observations). We also find whether a pad was found to be leaking in the first observation year had a statistically significant influence (4.9σ) on the presence of a leak in the following observation year. Similar levels of persistence are also apparent for non-leaking well pads. [1] D. R. Lyon, R. A. Alvarez, D. Zavala-Araiza, A. R. Brandt, R. B. Jackson, and S. P. Hamburg, "Aerial surveys of elevated hydrocarbon emissions from oil and gas production sites," Environ. Sci. Technol., p. acs.est.6b00705, Apr. 2016.
Structures of dynamic particle accumulation in Marangoni convection in half-zone liquid bridge

NASA Astrophysics Data System (ADS)

Tanaka, S.; Ueno, I.; Kawamura, H.

Thermocapillary convection is induced by the temperature difference T between two cylindrical rods sustaining liquid bridge. It is well known that the induced flow exhibits a transition from 2-D steady to 3-D time-dependent oscillatory flows with the increasing T. These convections can be visualized by using fine particles as tracers. In a certain flow condition, the particles were found to get accumulated. This is called PAS, particle accumulation structure, after Schwabe et al. (Microgravity, sci. technol. 1996). The authors group (Ueno et al, Proc. TSFP-2, 2001) categorized the induced flow fields into several regimes by the particle motion, structures and the surface temperature variation. Two sets of pulsating and rotating flows appeared. It was observed clearly that the particle gathered along a closed single path. This kind of structure was named as TL-PAS, Twisted-loop particle accumulation structure, (Tanaka et al, J. Japan Soc. Microgravity Appl, 2000). Special attention was paid for this kind of PAS in this study. The TL-PAS exhibited several types of closed path lines. Its detailed structure changed even in the same regime with a slight change of T and aspect ratio. The experimental setup consisted of the transparent crystal top and aluminum bottom rods. Flow fields were observed from top and side through two CCD cameras. A laser-light-sheet was employed in order to grasp the 3-D structures of TL-PAS. The liquid bridge of Silicone oil of 2 cSt was formed between rods of 5mm in diameter. Several kinds of particles were tested as tracer. The surface temperature variation was measured simultaneously by use of a 25μm thermocouple up to 50Hz, or 2.5μm CCT probe (constant current thermometry) up to 100Hz. By use of this apparatus, 3-D structure of TL-PAS and motions of individual particles were captured.
Seasonal Influences on Ground-Surface Water Interactions in an Arsenic-Affected Aquifer in Cambodia

NASA Astrophysics Data System (ADS)

Richards, L. A.; Magnone, D.; Van Dongen, B.; Bryant, C.; Boyce, A.; Ballentine, C. J.; Polya, D. A.

2015-12-01

Millions of people in South and Southeast Asia consume drinking water daily which contains dangerous levels of arsenic exceeding health-based recommendations [1]. A key control on arsenic mobilization in aquifers in these areas has been controversially identified as the interaction of 'labile' organic matter contained in surface waters with groundwaters and sediments at depth [2-4], which may trigger the release of arsenic from the solid- to aqueous-phase via reductive dissolution of iron-(hyr)oxide minerals [5]. In a field site in Kandal Province, Cambodia, which is an arsenic-affected area typical to others in the region, there are strong seasonal patterns in groundwater flow direction, which are closely related to monsoonal rains [6] and may contribute to arsenic release in this aquifer. The aim of this study is to explore the implications of the high susceptibility of this aquifer system to seasonal changes on potential ground-surface water interactions. The main objectives are to (i) identify key zones where there are likely ground-surface water interactions, (ii) assess the seasonal impact of such interactions and (iii) quantify the influence of interactions using geochemical parameters (such as As, Fe, NO3, NH4, 14C, 3T/3He, δ18O, δ2H). Identifying the zones, magnitude and seasonal influence of ground-surface water interactions elucidates new information regarding potential locations/pathways of arsenic mobilization and/or transport in affected aquifers and may be important for water management strategies in affected areas. This research is supported by NERC (NE/J023833/1) to DP, BvD and CJB and a NERC PhD studentship (NE/L501591/1) to DM. References: [1] World Health Organization, 2008. [2] Charlet & Polya (2006), Elements, 2, 91-96. [3] Harvey et al. (2002), Science, 298, 1602-1606. [4] Lawson et al. (2013), Env. Sci. Technol. 47, 7085 - 7094. [5] Islam et al. (2004), Nature, 430, 68-71. [6] Benner et al. (2008) Appl. Geochem. 23(11), 3072 - 3087.
Charging and performance of the CubeSTAR satellite studied by numerical simulations

NASA Astrophysics Data System (ADS)

Miloch, Wojciech; Bekkeng, Tore André; Lindem, Torfinn

2012-07-01

A good understanding of spacecraft-plasma interaction is important for all space missions and experiments. The spacecraft potential is determined by the plasma, photoemission and other currents [1]. A charged object can significantly disturb the surrounding plasma, and lead to wake formation. The wake features, such as ion focusing, can influence the measurements of the plasma by the instruments onboard. A study of this problem using analytical models is difficult and can not account for all phenomena. This has encouraged use of numerical models for self-consistent studies of the plasma-object interactions on a detailed kinetic level [2][3]. With three-dimensional particle-in-cell (PIC) simulations [3][4], we address the spacecraft-plasma interaction in various plasma environments, and account for the self-consistent charging of the spacecraft by plasma and photoemission currents. As a specific case, we consider the interactions between plasma and a CubeSTAR satellite. CubeSTAR is a nano-satellite for the space weather studies being constructed in Norway, with the launch scheduled for year 2013. With a novel Langmuir probe system [5], it will measure the absolute electron densities with a high spatial resolution, allowing for studies of small scale plasma irregularities. We perform a systematic study of the role of the wakefield on the measurements with the Langmuir probes onboard the CubeSTAR for the plasma conditions relevant for the planned polar orbit. The simulation results are of relevance also for other spacecraft missions. [1] Whipple E C, Rep. Prog. Phys. 44, 1197 (1981). [2] Roussel J F and Berthelier J J, J. Geophys. Res. 109, A01104 (2004). [3] Yaroshenko V V et al., J. Geophys. Res. 116, A12218 (2011). [4] Miloch W J Kroll M and Block D 2010 Phys. Plasmas 17, 103703 (2010). [5] Bekkeng T A et al. Meas. Sci. Technol. 21, 085903 (2010).
Application of the integrating sphere method to separate the contributions of brown and black carbon in atmospheric aerosols.

PubMed

Wonaschütz, Anna; Hitzenberger, Regina; Bauer, Heidi; Pouresmaeil, Parissa; Klatzer, Barbara; Caseiro, Alexandre; Puxbaum, Hans

2009-02-15

Until about a decade ago, black carbon (BC) was thought to be the only light absorbing substance in the atmospheric aerosol except for soil or desert dust In more recent years, light absorbing polymeric carbonaceous material was found in atmospheric aerosols. Absorption increases appreciably toward short wavelengths, so this fraction was called brown carbon. Because brown carbon is thermally rather refractory, it influences the split between organic carbon (OC) and elemental carbon (EC) in thermal methods and, through its light absorption characteristics, leads to overestimations of BC concentrations. The goal of the present study was to extend the integrating sphere method to correct the BC signal for the contribution of brown carbon and to obtain an estimate of brown carbon concentrations. Humic acid sodium salt was used as proxy for brown carbon. The extended method is first tested on mixtures of test substances and then applied to atmospheric samples collected during biomass smoke episodes (Easter bonfires) in Austria. The resulting concentrations of black and brown carbon are compared to EC obtained with a widely used thermal method, the Cachier method (Cachier et al. Tellus 1989, 41B, 379-390) and a thermal-optical method (Schmid et al. Atmos. Environ. 2001, 35, 2111-2121), as well as to concentrations of humic like substances (HULIS) and to biomass smoke POM (particulate organic matter). Both the thermal methods were found to overestimate BC on days with large contributions of woodsmoke, which agrees with the findings of the method intercomparison study by Reisinger et at. (Environ. Sci. Technol. 2008, 42, 884-889). During the days of the bonfires, the Cachier method gave EC concentrations that were higher by a factor of 3.8 than the BC concentrations, while the concentrations obtained with the thermal-optical method were higher by a factor of 2.6.
Planar laser imaging of differential molecular diffusion in gas-phase turbulent jets

NASA Astrophysics Data System (ADS)

Brownell, C. J.; Su, L. K.

2008-03-01

Planar laser Rayleigh scattering yields quantitative, two-dimensional measurements of differential diffusion in a turbulent propane-helium jet issuing into air. The jet exit Reynolds number ranges from 1000 to 3000, corresponding to estimated outer-scale Reynolds numbers from 4300 to 13 000. Using a technique originally proposed by Bilger and Dibble [Combust. Sci. Technol. 28, 161 (1982)], the imaging measurements allow direct determination of a normalized scalar difference quantity ξ. For the lower Re, significant differential diffusion develops in the pretransitional portion of the flow. Downstream of the turbulent transition, radial profiles of mean ξ take on a characteristic form, with an excess of the less-diffusive propane on the jet boundary. This characteristic form is independent of Reynolds number, and is thus apparently independent of the degree of differential diffusion in the pretransition range. Evolution of the ξ fields in the turbulent part of the flow is surprisingly consistent with the mixing of conventional scalar quantities. Fluctuation profiles of ξ have a self-similar, bimodal shape for each Re, and power spectra of ξ are monotonically decreasing, with a distinct k-5/3 inertial range. This spectral form is at odds with prior analytical and computational results in isotropic turbulence, which predicted that the spectrum would show a peak intermediate between the diffusive cutoffs of the individual scalars. The discrepancy appears to be due to the forcing applied in the simulations; the differential diffusion in the experiments preferentially develops in the jet near field, so the resulting evolution is more akin to a decay process. This is further emphasized by the observation that the thickness of ξ structures in the jet decreases with downstream distance. The present results indicate that consideration of differential diffusion must account for the details of the flow configuration, particularly the uniformity of turbulence levels. This has important implications for reacting flows, where local laminarization by heat release can be significant.
Reactive oxygen species from secondary organic aerosols decomposition in water and surrogate lung lining fluid

NASA Astrophysics Data System (ADS)

Tong, H.; Shen, F.; Lakey, P. S. J.; Arangio, A. M.; Socorro, J.; Brune, W. H.; Lucas, K.; Poeschl, U.; Shiraiwa, M.

2016-12-01

Reactive oxygen species (ROS) play a significant role in climate and adverse health effects of air pollutants (Anglada, J. M. et al., 2015; Pöschl and Shiraiwa, 2015). Secondary organic aerosols (SOA) account for a major fraction of fine particles (Jimenez et al., 2009; Huang et al., 2014). Thus, studies on ROS production ability of SOA are important for comprehensive evaluation of the impacts of air particulate matter on climate change and public health. In this study, we have investigated ROS formation by laboratory-generated SOA particles using a variety of different experimental techniques including electron paramagnetic resonance spectrometry, dithiothreitol and fluorometric hydrogen peroxide assays, and LC-MS/MS spectrometry, we found substantial amounts of ROS species such as •OH, O2•-, RO•, R• and H2O2 were generated by isoprene, β-pinene, and naphthalene SOA upon interaction with water and surrogate lung lining fluid. Antioxidants contained in surrogate lung lining fluid scavenge •OH and O2•-efficiently, but not organic radicals. LC-MS/MS analysis and kinetic modeling suggest that organic hydroperoxides, which account for a major fraction of SOA particles (Docherty et al., 2005; Ehn et al., 2014) play a critical role in ROS formation (Tong et al., 2016). We also found the cellular responses of human alveolar basal epithelial (A549) and macrophage cells (THP-1) to SOA could be explained by the ROS yields, indicating a key role of ROS on the cytotoxicity of SOA. Anglada, J. M. et al., Acc. Chem. Res. 48, 575-583, 2015. Docherty, K. S. eta al. Environ. Sci. Technol. 39, 4049-4059, 2005. Ehn, M. et al., Nature 506, 476-479, 2014. Huang, R.-J. et al., Nature 514, 218-222, 2014. Jimenez, J. L. et al., Science 326, 1525-1529, 2009. Pöschl, U., and Shiraiwa, M. Chem. Rev., 115, 4440-4475, 2015. Tong, H. et al., Atmos. Chem. Phys. 16, 1761-1771, 2016.
Dose Accuracy and Injection Force of Different Insulin Glargine Pens

PubMed Central

Friedrichs, Arnd; Bohnet, Janine; Korger, Volker; Adler, Steffen; Schubert-Zsilavecz, Manfred; Abdel-Tawab, Mona

2013-01-01

Background Dose accuracy and injection force, representing key parameters of insulin pens, were determined for three pens delivering insulin glargine-based copies, Pen Royale (WR) and DispoPen (WD) for Glaritus® (Wockhardt) and GanLee Pen (GL) for Basalin® (Gan & Lee), compared with pens of the originator, ClikSTAR® (CS) and S o l o S TA R® (SS) for Lantus® (Sanofi) . Methods Using the weighing procedure recommended by DIN EN ISO 11608–1:2000, dose accuracy was evaluated based on nonrandomized delivery of low (5 U), mid (30 U), and high (60 U) dosage levels. Injection force was measured by dispensing the maximum dose of insulin (60 U for the GL, WR, and WD; 80 U for the SS and CS) at dose speeds of 6 and 10 U/s. Results All tested pens delivered comparable average doses within the DIN EN ISO 11608–1:2000 limits at all dosage levels. The GL revealed a higher coefficient of variation (CV) at 5 U, and the WR and WD had higher CVs at all dosage levels compared with the CS and SS. Injection force was higher for the WR, WD, and GL compared with the CS and SS at both dose speeds. In contrast to the CS and SS with an end-of-content feature, doses exceeding the remaining insulin could be dialed with the WR, GL, and WD and, apparently, dispensed with the WD. Conclusions All pens fulfilled the dose accuracy requirements defined by DIN EN ISO 11608–1:2000 standards at all three dosage levels, with the WR, WD, and GL showing higher dosage variability and injection force compared with the SS and CS. Thus, the devices that deliver insulin glargine copies show different performance characteristics compared with the originator. J Diabetes Sci Technol 2013;7(5):1346–1353 PMID:24124963
Upscaling mixing in porous media from an experimental quantification of pore scale Lagrangian deformation statistics

NASA Astrophysics Data System (ADS)

Turuban, R.; Jimenez-Martinez, J.; De Anna, P.; Tabuteau, H.; Meheust, Y.; Le Borgne, T.

2014-12-01

As dissolved chemical elements are transported in the subsurface, their mixing with other compounds and potential reactivity depends on the creation of local scale chemical gradients, which ultimately drive diffusive mass transfer and reaction. The distribution of concentration gradients is in turn shaped by the spatial gradients of flow velocity arising from the random distribution of solid grains. We present an experimental investigation of the relationship between the microscale flow stretching properties and the effective large scale mixing dynamics in porous media. We use a flow cell that models a horizontal quasi two-dimensional (2D) porous medium, the grains of which are cylinders randomly positioned between two glass plates [de Anna et al. 2013]. In this setup, we perform both non diffusive and diffusive transport tests, by injecting respectively microsphere solid tracers and a fluorescent dye. While the dye front propagates through the medium, it undergoes in time a kinematic stretching that is controlled by the flow heterogeneity, as it encounters stagnation zones and high velocity channels between the grains. The spatial distribution of the dye can then be described as a set of stretched lamellae whose rate of diffusive smoothing is locally enhanced by kinematic stretching [Le Borgne et al., 2013]. We show that this representation allows predicting the temporal evolution of the mixing rate and the probability distribution of concentration gradients for a range of Peclet numbers. This upscaling framework hence provides a quantification of the dynamics of effective mixing from the microscale Lagrangian velocity statistics. References:[1] P. de Anna, J. Jimenez-Martinez, H. Tabuteau, R. Turuban, T. Le Borgne, M. Derrien,and Yves Méheust, Mixing and reaction kinetics in porous media : an experimental pore scale quantification, Environ. Sci. Technol. 48, 508-516, 2014. [2] Le Borgne, T., M. Dentz, E. Villermaux, Stretching, coalescence and mixing in porous media, Phys. Rev. Lett., 110, 204501 (2013)
Towards improved photovoltaic conversion using dilute magnetic semiconductors (abstract only)

NASA Astrophysics Data System (ADS)

Olsson, Pär; Guillemoles, J.-F.; Domain, C.

2008-02-01

Present photovoltaic devices, based on p/n junctions, are limited from first principles to maximal efficiencies of 31% (40% under full solar concentration; Shockley and Queisser 1961 J. Appl. Phys. 32 510). However, more innovative schemes may overcome the Shockley-Queisser limit since the theoretical maximal efficiency of solar energy conversion is higher than 85% (Harder and Würfel 2003 Semicond. Sci. Technol. 18 S151). To date, the only practical realization of such an innovative scheme has been multi-junction devices, which at present hold the world record for efficiency at nearly 41% at significant solar concentration (US DOE news site: http://www.energy.gov/news/4503.htm). It has been proposed that one could make use of the solar spectrum in much the same way as the multi-junction devices do but in a single cell, using impurity induced intermediate levels to create gaps of different sizes. This intermediate level semiconductor (ILSC) concept (Green and Wenham 1994 Appl. Phys. Lett. 65 2907; Luque and Martí1997 Phys. Rev. Lett. 78 5014) has a maximal efficiency similar to that of multi-junction devices but suffers from prohibitively large non-radiative recombination rates. We here propose to use a ferromagnetic impurity scheme in order to reduce the non-radiative recombination rates while maintaining the high theoretical maximum efficiency of the ILSC scheme, that is about 46%. Using density functional theory calculations, the electronic and energetic properties of transition metal impurities for a wide range of semiconductors have been analysed. Of the several hundred compounds studied, only a few fulfil the design criteria that we present here. As an example, wide gap AlP is one of the most promising compounds. It was found that inclusion of significant amounts of Mn in AlP induces band structures providing conversion efficiencies potentially close to the theoretical maximum, with an estimated Curie temperature reaching above 100 K.
Kinetics of Deliquescence

NASA Astrophysics Data System (ADS)

McGraw, R. L.; Lewis, E.

2009-12-01

We examine deliquescence phase transformation for inorganic salt particles ranging from bulk down to several nanometers in size. Thermodynamic properties of the particles, coated with aqueous solution layers of varying thickness and surrounded by vapor, are analyzed. A thin layer criterion is introduced to define a limiting deliquescence relative humidity (DRH). Nano-size particles are predicted to deliquesce at relative humidity just below the DRH on crossing a nucleation barrier, located at a critical solution layer thickness. This barrier vanishes precisely at the DRH defined by the criterion. For a population of particles, the inherent random nature of the nucleation process is predicted to result in a distribution of RH values over which deliquescence will be seen to occur. Measurement of this (apparent) non-abrupt deliquescence of the population should provide both a validation of the nucleation mechanism and a quantitative determination of nucleation rate. This paper presents calculations of crossing (i.e. deliquescence) rate using the theory of mean first passage times (MFPT). MFPT theory is shown to provide a generalization of Becker-Döring nucleation kinetics especially useful for barrier heights much lower than those typically encountered in vapor-liquid nucleation. Barrier heights for deliquescence depend on the concentration of pre-deliquesced particles and observation time, but are typically in the 5-15kT range. Calculations use the tandem nano-differential mobility analyzer setup of Biskos et al. [1] as a model framework. In their experiment, a concentration of dry salt particles is subject to a higher RH for some observation time, after which is measured the (well-separated) populations of un-deliquesced particles and those that have deliquesced. Theoretical estimates for the conversion kinetics are presented as a function of dry particle size, DRH, and salt properties. [1] G. Biskos, A. Malinowski, L. M. Russell, P. R. Buseck, and S. T. Martin, Aerosol Sci. and Technol. 40, 97 (2006).
Current practice of methylprednisolone administration for acute spinal cord injury in Germany: a national survey.

PubMed

Druschel, Claudia; Schaser, Klaus-Dieter; Schwab, Jan M

2013-05-15

Written mail-out survey. To determine current practice in high-dose methylprednisolone succinate (MPSS) administration for treatment of acute spinal cord injury (SCI) in Germany. Reanalysis of the National Acute Spinal Cord Injury Studies (NASCIS) resulted in criticism of the use of high-dose MPSS for treatment of acute SCI. Subsequently, SCI treatment guidelines were revised leading to a reduction in MPSS use across North America. The impact of these revisions on SCI treatment in Germany is not known. A questionnaire was sent to all trauma, orthopedic and neurosurgical departments of German university centers, affiliated teaching hospitals, and specialized SCI care centers. Survey included 6 questions about the administration of MPSS after acute SCI. Three hundred seventy-two respondents completed the survey (response rate: 51% overall, 76% university hospitals, 85% specialized SCI care centers). Overall, 55% of departments that treat SCI prescribe MPSS. Among them, 73% are "frequent" users administering MPSS to more than 50% of their patients. Ten percent prescribe according to NASCIS I, 43% NASCIS II, 33% NASCIS III, and 13% "generic protocols." As justification for MPSS treatment, "effectiveness" ranked before "common practice" and "medicolegal reasons." "Specialized" SCI care centers differ in that (1) MPSS is administered less frequently, (2) NASCIS I doses are not used, and (3) during the past several years, practice patterns are more likely to have shifted away from the treatment of SCI with MPSS. About one-half of the institutions continue to prescribe MPSS in the setting of acute SCI. A need for further education in almost one-fourth of German departments treating acute SCI is demonstrated through responses indicating use of the outdated NASCIS I protocol, a "legal need" or "unchanged MPSS application during the last years." "Specialized" SCI centers are more likely to change their practice in accordance with evolving literature. 3.
Persistent Polyuria in a Rat Spinal Contusion Model

PubMed Central

Ward, Patricia J.

2012-01-01

Abstract Polyuria contributes to bladder overdistention, which confounds both lower and upper urinary tract management in individuals having a spinal cord injury (SCI). Bladder overdistention post-SCI is one of the most common triggers for autonomic dysreflexia, a potentially life-threatening condition. Post-SCI polyuria is thought to result from loss of vascular tone in the lower extremities, leading to edema and subsequent excess fluid, resulting in polyuria. Mild SCIs that have near complete recovery would therefore be expected to have little to no polyuria, while severe injuries resulting in flaccid limbs and lower extremity edema would be expected to exhibit severe polyuria. Since interventions that may decrease lower extremity edema are recommended to lessen the severity of polyuria, step training (which promotes vascular circulation) was evaluated as a therapy to reduce post-SCI polyuria. In the present study, polyuria was evaluated in mild, moderate, and severe contusive SCI in adult male rats. The animals were housed in metabolic cages for 24-hour periods pre- and post-SCI (to 6 weeks). Urine, feces, food, water, and body weights were collected. Other assessments included residual expressed urine volumes, locomotor scoring, in-cage activity, and lesion histology. SCI produced an immediate increase in 24-hour urine collection, as early as 3 days post-SCI. Approximately 2.6-fold increases in urine collection occurred from weeks 1–6 post-SCI for all injury severities. Even with substantial gains in locomotor and bladder function following a mild SCI, polyuria remained severe. Step training (30 min/day, 6 days/week) did not alleviate polyuria in the moderate SCI contusion group. These results indicate that (1) mild injuries retaining weight-bearing locomotion that should have mild, if any, edema/loss of vascular tone still exhibit severe polyuria, and (2) step training was unable to reduce post-SCI polyuria. Taken together, these results indicate that the current mechanistic hypothesis of post-SCI polyuria may be incomplete. PMID:22708983
Persistent polyuria in a rat spinal contusion model.

PubMed

Ward, Patricia J; Hubscher, Charles H

2012-10-10

Polyuria contributes to bladder overdistention, which confounds both lower and upper urinary tract management in individuals having a spinal cord injury (SCI). Bladder overdistention post-SCI is one of the most common triggers for autonomic dysreflexia, a potentially life-threatening condition. Post-SCI polyuria is thought to result from loss of vascular tone in the lower extremities, leading to edema and subsequent excess fluid, resulting in polyuria. Mild SCIs that have near complete recovery would therefore be expected to have little to no polyuria, while severe injuries resulting in flaccid limbs and lower extremity edema would be expected to exhibit severe polyuria. Since interventions that may decrease lower extremity edema are recommended to lessen the severity of polyuria, step training (which promotes vascular circulation) was evaluated as a therapy to reduce post-SCI polyuria. In the present study, polyuria was evaluated in mild, moderate, and severe contusive SCI in adult male rats. The animals were housed in metabolic cages for 24-hour periods pre- and post-SCI (to 6 weeks). Urine, feces, food, water, and body weights were collected. Other assessments included residual expressed urine volumes, locomotor scoring, in-cage activity, and lesion histology. SCI produced an immediate increase in 24-hour urine collection, as early as 3 days post-SCI. Approximately 2.6-fold increases in urine collection occurred from weeks 1-6 post-SCI for all injury severities. Even with substantial gains in locomotor and bladder function following a mild SCI, polyuria remained severe. Step training (30 min/day, 6 days/week) did not alleviate polyuria in the moderate SCI contusion group. These results indicate that (1) mild injuries retaining weight-bearing locomotion that should have mild, if any, edema/loss of vascular tone still exhibit severe polyuria, and (2) step training was unable to reduce post-SCI polyuria. Taken together, these results indicate that the current mechanistic hypothesis of post-SCI polyuria may be incomplete.
E2F4 Promotes Neuronal Regeneration and Functional Recovery after Spinal Cord Injury in Zebrafish

PubMed Central

Sasagawa, Shota; Nishimura, Yuhei; Hayakawa, Yuka; Murakami, Soichiro; Ashikawa, Yoshifumi; Yuge, Mizuki; Okabe, Shiko; Kawaguchi, Koki; Kawase, Reiko; Tanaka, Toshio

2016-01-01

Mammals exhibit poor recovery after spinal cord injury (SCI), whereas non-mammalian vertebrates exhibit significant spontaneous recovery after SCI. The mechanisms underlying this difference have not been fully elucidated; therefore, the purpose of this study was to investigate these mechanisms. Using comparative transcriptome analysis, we demonstrated that genes related to cell cycle were significantly enriched in the genes specifically dysregulated in zebrafish SCI. Most of the cell cycle-related genes dysregulated in zebrafish SCI were down-regulated, possibly through activation of e2f4. Using a larval zebrafish model of SCI, we demonstrated that the recovery of locomotive function and neuronal regeneration after SCI were significantly inhibited in zebrafish treated with an E2F4 inhibitor. These results suggest that activation of e2f4 after SCI may be responsible, at least in part, for the significant recovery in zebrafish. This provides novel insight into the lack of recovery after SCI in mammals and informs potential therapeutic strategies. PMID:27242526
Spinal cord injury rehabilitation in Riyadh, Saudi Arabia: Time to rehabilitation admission, length of stay and functional independence

PubMed Central

Mahmoud, Husam; Qannam, Hazem; Mortenson, Ben

2017-01-01

Objectives 1) To describe functional status, length of stay (LOS), and time to rehabilitation admission trends. 2) To identify independent predictors of motor function following rehabilitation for traumatic and nontraumatic spinal cord injury (SCI). Participants Adult patients with SCI discharged from inpatient rehabilitation between 2009–2014. Design Retrospective cohort study. Setting Spinal injury rehabilitation unit at the King Fahad Medical City, Riyadh, Saudi Arabia. Methods From retrospective chart reviews of 312 traumatic and 106 nontraumatic SCI, we extracted information on time from injury to rehabilitation admission, rehabilitation LOS, and Functional Independence Measure (FIM) score (admission and discharge). Additionally we collected information on SCI patients’ demographics and injury characteristics. Hierarchical regression was employed to investigate variables associated with FIM motor score at discharge for traumatic SCI and nontraumatic SCI. Outcome measures FIM motor score measured at discharge. Results Mean and median days from injury to rehabilitation admission were not significantly different for traumatic SCI (377±855, 150) and nontraumatic SCI (288±403, 176). Mean and median days for rehabilitation LOS were significantly longer for traumatic SCI (85±60, 70) compared to nontraumatic SCI (64±59, 49) (p=…..). FIM scores improved significantly from admission to discharge in both groups. For individuals with traumatic SCI, after accounting for admission FIM motor score, tetraplegia and time from injury to rehabilitation, admission had a significant but small negative association with discharge FIM motor score. For individuals with nontraumatic SCI, increasing age and AIS score of A or B had a significant negative association with discharge FIM motor score. LOS in rehabilitation was not a significant contributor for either model. Conclusions Decreasing the time from injury to rehabilitation admission may improve outcomes for those with traumatic SCI. Since time spent in rehabilitation was shorter than most other countries, a change in practice in this area may be warranted. Developing new strategies to improve outcomes for older patients with nontraumatic SCI would also be beneficial. PMID:28139661
76 FR 10395 - BreconRidge Manufacturing Solutions, Now Known as Sanmina-SCI Corporation, Division...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-24

... Solutions, Now Known as Sanmina-SCI Corporation, Division Optoelectronic and Microelectronic Design and Manufacturing, a Subsidiary of Sanmina-SCI Corporation, Including On- Site Leased Workers From Kelly Services... Manufacturing Solutions, now known as Sanmina-SCI Corporation, Division Optoelectronic and Microelectronic...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.