78 FR 21037 - Special Conditions: Airbus Model A330-200 Airplanes; Bulk Cargo Lower Deck Crew Rest Compartments

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-09

... A330- 200 airplane. This airplane as modified by TTF Aerospace LLC will have a novel or unusual design... airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These... novel or unusual design feature, special conditions are prescribed under the provisions of Sec. 21.16...

78 FR 55629 - Special Conditions: Cirrus Design Corporation, Model SF50; Inflatable Three-Point Restraint...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-11

...-0781; Special Conditions No. 23-261-SC] Special Conditions: Cirrus Design Corporation, Model SF50... conditions are issued for the Cirrus Design Corporation (Cirrus), model SF50. This airplane will have novel and unusual design features associated with installation of an inflatable three-point restraint safety...

75 FR 20518 - Special Conditions: Cirrus Design Corporation Model SF50 Airplane; Full Authority Digital Engine...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-20

...; Special Conditions No. 23-246-SC] Special Conditions: Cirrus Design Corporation Model SF50 Airplane; Full Authority Digital Engine Control (FADEC) System AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... Cirrus Design Corporation model SF50 airplane. This airplane will have a novel or unusual design feature...

78 FR 19982 - Special Conditions: Turbomeca Ardiden 3K Turboshaft Engine

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-03

... novel or unusual design feature that is a 30-minute all engines operating (AEO) power rating for... appropriate safety standards for this design feature. These special conditions contain the additional safety... Ardiden 3K engine is the first variant in the new Ardiden 3 series. This engine incorporates a two-stage...

77 FR 19148 - Special Conditions: Airbus, A350-900 Series Airplane; Crew Rest Compartments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

...-900 series airplanes. These airplanes will have novel or unusual design features associated with two... standards for this design feature. These proposed special conditions contain the additional safety standards... for FAA type certification to June 28, 2009. The A350-900 series has a conventional layout with twin...

76 FR 10529 - Special Conditions: Gulfstream Model GVI Airplane; Electronic Systems Security Protection From...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-25

... Gulfstream GVI airplane. This airplane will have novel or unusual design features associated with the... not contain adequate or appropriate safety standards for these design features. These proposed special... will be an all-new, two- engine jet transport airplane with an executive cabin interior. The maximum...

76 FR 18130 - Special Conditions: Turbomeca Arriel 2D Turboshaft Engine

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... unusual design feature which is a 30-minute power rating. This rating is generally intended to be used for... contain adequate or appropriate safety standards for this design feature. These proposed special... your comments on this proposal, send us a pre-addressed, stamped postcard on which the docket number...

77 FR 1618 - Special Conditions: The Boeing Company, Model 767-300; Seats With Inflatable Lapbelts

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-11

... series airplanes. These airplanes will have a novel or unusual design feature associated with seats with... standards for this design feature. These special conditions contain the additional safety standards that the....regulations.gov/ at any time. Follow the online instructions for accessing the docket or go to the Docket...

76 FR 71865 - Special Conditions: Gulfstream Aerospace Corporation, Model GVI Airplane; Windshield Coating in...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-21

...; Special Conditions No. 25-452-SC] Special Conditions: Gulfstream Aerospace Corporation, Model GVI Airplane... Aerospace Corporation Model GVI airplane. This airplane will have a novel or unusual design feature(s..., Gulfstream Aerospace Corporation (GAC) applied for an FAA type certificate for its new Model GVI passenger...

76 FR 15798 - Special Conditions: Boeing 747-468, Installation of a Medical Lift

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-22

... a novel or unusual design feature associated with the installation of a medical lift. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These... airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. Type...

78 FR 36084 - Special Conditions: The Boeing Company, Model 717-200 Series Airplanes; Seats With Inflatable...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-17

... 717- 200 series airplanes. These airplanes will have a novel or unusual design feature [[Page 36085... series airplanes will incorporate the following novel or unusual design features: inflatable lapbelts on... certain novel or unusual design features on one model series of airplanes. It is not a rule of general...

77 FR 69573 - Special Conditions: Embraer S.A., Model EMB-550 Airplane; Electronic Flight Control System...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-20

... airplane will have a novel or unusual design feature(s) associated with an electronic flight control system... empennage and control surfaces. The Model EMB-550 airplane is designed for 8 passengers, with a maximum of... flight control design feature within the normal operational envelope in which sidestick deflection in the...

10 CFR 830.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... Critical assembly means special nuclear devices designed and used to sustain nuclear reactions, which may... reaction becomes self-sustaining. Design features means the design features of a nuclear facility specified... reaction (e.g., uranium-233, uranium-235, plutonium-238, plutonium-239, plutonium-241, neptunium-237...

Recent Innovations in the Changing Criterion Design: Implications for Research and Practice in Special Education

ERIC Educational Resources Information Center

McDougall, Dennis; Hawkins, Jacqueline; Brady, Michael; Jenkins, Amelia

2006-01-01

This article illustrates (a) 2 recent innovations in the changing criterion research design, (b) how these innovations apply to research and practice in special education, and (c) how clinical needs influence design features of the changing criterion design. The first innovation, the range-bound changing criterion, is a very simple variation of…

77 FR 42949 - Special Conditions: Tamarack Aerospace Group, Cirrus Model SR22; Active Technology Load...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-23

... novel or unusual design feature(s) associated with Tamarack Aerospace Group's modification. The design... not aware of the failure. Warning systems must not activate the control system. (b) The design of the... Active Control Surface (TACS) must be designed and installed to prevent jamming, chafing, and...

76 FR 8319 - Special Conditions: Gulfstream Model GVI Airplane; Design Roll Maneuver Requirement for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-14

... design features include an electronic flight control system that provides roll control of the airplane... Design Features The GVI is equipped with an electronic flight control system that provides roll control... condition at design maneuvering speed (V A ), in which the cockpit roll control is returned to neutral...

76 FR 39763 - Special Conditions: Boeing Model 787-8 Airplane; Interaction of Systems and Structures...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

...) Protection, Limit Engine Torque Loads for Sudden Engine Stoppage, and Design Roll Maneuver Requirement AGENCY... design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. These design features include limit engine torque loads for sudden engine...

78 FR 75511 - Special Conditions: Bombardier Inc., Models BD-500-1A10 and BD-500-1A11 Series Airplanes...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-12

... Design Features The C-series airplanes will incorporate the following novel or unusual design features: A.... Conclusion This action affects only certain novel or unusual design features on two model series of airplanes... Inc., Models BD-500-1A10 and BD- 500-1A11 Series Airplanes; Electronic Flight Control System: Control...

76 FR 65105 - Special Conditions: Gulfstream Aerospace Corporation, Model GIV-X Airplane; Isolation or Aircraft...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-20

... supplemental type certificate to install a new interior design configuration in the Gulfstream Model GIV-X... airplane. This airplane will have novel or unusual design features associated with connectivity of the... airworthiness regulations do not contain adequate or appropriate safety standards for these design features...

77 FR 28530 - Special Conditions: Tamarack Aerospace Group, Cirrus Model SR22; Active Technology Load...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-15

... have a novel or unusual design feature(s) associated with Tamarack Aerospace Group's modification. The... the control system. (b) The design of the load alleviation system or of any other automatic system...) Each detail of the Tamarack Active Control Surface (TACS) must be designed and installed to prevent...

Environmental Correlates to Behavioral Health Outcomes in Alzheimer's Special Care Units

ERIC Educational Resources Information Center

Zeisel, John; Silverstein, Nina M.; Hyde, Joan; Levkoff, Sue; Lawton, M. Powell; Holmes, William

2003-01-01

Purpose: We systematically measured the associations between environmental design features of nursing home special care units and the incidence of aggression, agitation, social withdrawal, depression, and psychotic problems among persons living there who have Alzheimer's disease or a related disorder. Design and Methods: We developed and tested a…

78 FR 11560 - Special Conditions: Embraer S.A., Model EMB-550 Airplane; Electronic Flight Control System...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-19

... or unusual design feature(s) associated with an electronic flight control system with respect to... control surfaces. The Model EMB-550 airplane is designed for 8 passengers, with a maximum of 12 passengers... the pilot or copilot sidestick. The Embraer S.A. Model EMB-550 airplane has a flight control design...

76 FR 9265 - Special Conditions: Gulfstream Model GVI Airplane; Electronic Flight Control System: Control...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-17

... for transport category airplanes. These design features include an electronic flight control system... Design Features The GVI has an electronic flight control system and no direct coupling from the cockpit...: Gulfstream Model GVI Airplane; Electronic Flight Control System: Control Surface Position Awareness AGENCY...

75 FR 2433 - Special Conditions: Boeing Model 747-8/-8F Airplanes, Systems and Data Networks Security...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-15

... design features associated with the architecture and connectivity capabilities of the airplane's computer... novel or unusual design features: digital systems architecture composed of several connected networks. The architecture and network configuration may be used for, or interfaced with, a diverse set of...

76 FR 36863 - Special Conditions: Gulfstream Model GVI Airplane; Electronic Systems Security Protection From...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-23

... airplane. This airplane will have novel or unusual design features associated with the architecture and... incorporate the following novel or unusual design features: Digital systems architecture composed of several connected networks. The proposed architecture and network configuration may be used for, or interfaced with...

Environmental correlates to behavioral health outcomes in Alzheimer's special care units.

PubMed

Zeisel, John; Silverstein, Nina M; Hyde, Joan; Levkoff, Sue; Lawton, M Powell; Holmes, William

2003-10-01

We systematically measured the associations between environmental design features of nursing home special care units and the incidence of aggression, agitation, social withdrawal, depression, and psychotic problems among persons living there who have Alzheimer's disease or a related disorder. We developed and tested a model of critical health-related environmental design features in settings for people with Alzheimer's disease. We used hierarchical linear modeling statistical techniques to assess associations between seven environmental design features and behavioral health measures for 427 residents in 15 special care units. Behavioral health measures included the Cohen-Mansfield physical agitation, verbal agitation, and aggressive behavior scales, the Multidimensional Observation Scale for Elderly Subjects depression and social withdrawal scales, and BEHAVE-AD (psychotic symptom list) misidentification and paranoid delusions scales. Statistical controls were included for the influence of, among others, cognitive status, need for assistance with activities of daily living, prescription drug use, amount of Alzheimer's staff training, and staff-to-resident ratio. Although hierarchical linear modeling minimizes the risk of Type II-false positive-error, this exploratory study also pays special attention to avoiding Type I error-the failure to recognize possible relationships between behavioral health characteristics and independent variables. We found associations between each behavioral health measure and particular environmental design features, as well as between behavioral health measures and both resident and nonenvironmental facility variables. This research demonstrates the potential that environment has for contributing to the improvement of Alzheimer's symptoms. A balanced combination of pharmacologic, behavioral, and environmental approaches is likely to be most effective in improving the health, behavior, and quality of life of people with Alzheimer's disease.

Design, analysis, fabrication and test of the Space Shuttle solid rocket booster motor case

NASA Technical Reports Server (NTRS)

Kapp, J. R.

1978-01-01

The motor case used in the solid propellant booster for the Space Shuttle is unique in many respects, most of which are indigenous to size and special design requirements. The evolution of the case design from initial requirements to finished product is discussed, with increased emphasis of reuse capability, special design features, fracture mechanics and corrosion control. Case fabrication history and the resulting procedure are briefly reviewed with respect to material development, processing techniques and special problem areas. Case assembly, behavior and performance during the DM-1 static firing are reviewed, with appropriate comments and conclusions.

[Identification of special quality eggs with NIR spectroscopy technology based on symbol entropy feature extraction method].

PubMed

Zhao, Yong; Hong, Wen-Xue

2011-11-01

Fast, nondestructive and accurate identification of special quality eggs is an urgent problem. The present paper proposed a new feature extraction method based on symbol entropy to identify near infrared spectroscopy of special quality eggs. The authors selected normal eggs, free range eggs, selenium-enriched eggs and zinc-enriched eggs as research objects and measured the near-infrared diffuse reflectance spectra in the range of 12 000-4 000 cm(-1). Raw spectra were symbolically represented with aggregation approximation algorithm and symbolic entropy was extracted as feature vector. An error-correcting output codes multiclass support vector machine classifier was designed to identify the spectrum. Symbolic entropy feature is robust when parameter changed and the highest recognition rate reaches up to 100%. The results show that the identification method of special quality eggs using near-infrared is feasible and the symbol entropy can be used as a new feature extraction method of near-infrared spectra.

78 FR 11553 - Special Conditions: Embraer S.A., Model EMB-550 Airplane; Electronic Flight Control System...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-19

... metal with composite empennage and control surfaces. The Model EMB-550 airplane is designed for 8...; Electronic Flight Control System: Control Surface Awareness and Mode Annunciation AGENCY: Federal Aviation... Embraer S.A. Model EMB-550 airplane. This airplane will have a novel or unusual design feature(s...

76 FR 62603 - Special Conditions: The Boeing Company, Model 747-8; Upper Deck Occupancy

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-11

... Conditions No. 25-446-SC] Special Conditions: The Boeing Company, Model 747-8; Upper Deck Occupancy AGENCY.... SUMMARY: These special conditions are issued for the Boeing Model 747-8 airplane. These airplanes will... airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These...

75 FR 46838 - Special Conditions: Embraer ERJ 190-100 Series Airplane Seats With Non-Traditional, Large, Non...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-04

...; Special Conditions No. 25-408-SC] Special Conditions: Embraer ERJ 190-100 Series Airplane Seats With Non-Traditional, Large, Non-Metallic Panels AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final... 190- 100 series airplane. This airplane will have novel or unusual design features that include non...

77 FR 16910 - Special Conditions: Boeing Model 787 Series Airplanes; Single-place Side-facing Seats With...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-23

...-0311; Special Conditions No. 25-458-SC] Special Conditions: Boeing Model 787 Series Airplanes; Single... associated with single-place side-facing seats with inflatable lapbelts. The applicable airworthiness... have a novel or unusual design feature associated with single-place side-facing seats with inflatable...

Designing the School Plant as a Community Center.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Div. of School Buildings and Grounds.

In the planning of school plants to serve the educational, social, civic, recreational, and cultural needs of the entire community, factors which receive special consideration are location of facilities, heat distribution, zoning, storage space, and special appointments and service features. (RH)

76 FR 63818 - Special Conditions: Boeing Model 767-400ER Series Airplanes; Seats With Inflatable Lapbelts

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-14

... appropriate safety standards for the 767-400ER series airplanes because of a novel or unusual design feature...-1106; Special Conditions No. 25-448-SC] Special Conditions: Boeing Model 767-400ER Series Airplanes...- 400ER series airplane. These airplanes, as modified by Continental Airlines, will have a novel or...

Web-Based Online Public Access Catalogues of IIT Libraries in India: An Evaluative Study

ERIC Educational Resources Information Center

Madhusudhan, Margam; Aggarwal, Shalini

2011-01-01

Purpose: The purpose of the paper is to examine the various features and components of web-based online public access catalogues (OPACs) of IIT libraries in India with the help of a specially designed evaluation checklist. Design/methodology/approach: The various features of the web-based OPACs in six IIT libraries (IIT Delhi, IIT Bombay, IIT…

76 FR 39795 - Special Conditions: Pratt and Whitney Canada Model PT6C-67E Turboshaft Engine

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

... Whitney Canada (PWC) model PT6C-67E engines. The engine model will have a novel or unusual design feature... regulations do not contain adequate or appropriate safety standards for this design feature. These proposed... pre-addressed, stamped postcard on which the docket number appears. We will stamp the date on the...

14 CFR 21.16 - Special conditions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... standards for an aircraft, aircraft engine, or propeller because of a novel or unusual design feature of the aircraft, aircraft engine or propeller, he prescribes special conditions and amendments thereto for the... safety standards for the aircraft, aircraft engine or propeller as the Administrator finds necessary to...

14 CFR 21.16 - Special conditions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... standards for an aircraft, aircraft engine, or propeller because of a novel or unusual design feature of the aircraft, aircraft engine or propeller, he prescribes special conditions and amendments thereto for the... safety standards for the aircraft, aircraft engine or propeller as the Administrator finds necessary to...

Work plan for special design features and crack sealing maintenance.

DOT National Transportation Integrated Search

2013-09-01

The Alaska DOT&PF wants to construct and maintain asphalt concrete (AC) paved highways in a way that minimizes roadway lifecycle costs while preserving acceptable : performance. Thermal cracking is a natural feature of most paved Alaska roadways that...

78 FR 14005 - Special Conditions: Embraer S.A., Model EMB-550 Airplanes; Flight Envelope Protection: Pitch and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-04

...-1211; Special Conditions No. 25-486-SC] Special Conditions: Embraer S.A., Model EMB-550 Airplanes... Embraer S.A. Model EMB-550 airplane. This airplane will have a novel or unusual design feature associated...: Background On May 14, 2009, Embraer S.A. applied for a type certificate for their new Model EMB-550 airplane...

Design of combinatorial libraries for the exploration of virtual hits from fragment space searches with LoFT.

PubMed

Lessel, Uta; Wellenzohn, Bernd; Fischer, J Robert; Rarey, Matthias

2012-02-27

A case study is presented illustrating the design of a focused CDK2 library. The scaffold of the library was detected by a feature trees search in a fragment space based on reactions from combinatorial chemistry. For the design the software LoFT (Library optimizer using Feature Trees) was used. The special feature called FTMatch was applied to restrict the parts of the queries where the reagents are permitted to match. This way a 3D scoring function could be simulated. Results were compared with alternative designs by GOLD docking and ROCS 3D alignments.

Design and adaptation of a novel supercritical extraction facility for operation in a glove box for recovery of radioactive elements

NASA Astrophysics Data System (ADS)

Kumar, V. Suresh; Kumar, R.; Sivaraman, N.; Ravisankar, G.; Vasudeva Rao, P. R.

2010-09-01

The design and development of a novel supercritical extraction experimental facility adapted for safe operation in a glove box for the recovery of radioactive elements from waste is described. The apparatus incorporates a high pressure extraction vessel, reciprocating pumps for delivering supercritical fluid and reagent, a back pressure regulator, and a collection chamber. All these components of the system have been specially designed for glove box adaptation and made modular to facilitate their replacement. Confinement of these materials must be ensured in a glove box to protect the operator and prevent contamination to the work area. Since handling of radioactive materials under high pressure (30 MPa) and temperature (up to 333 K) is involved in this process, the apparatus needs elaborate safety features in the design of the equipment, as well as modification of a standard glove box to accommodate the system. As a special safety feature to contain accidental leakage of carbon dioxide from the extraction vessel, a safety vessel has been specially designed and placed inside the glove box. The extraction vessel was enclosed in the safety vessel. The safety vessel was also incorporated with pressure sensing and controlling device.

14 CFR 21.16 - Special conditions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... aircraft, aircraft engine, or propeller because of a novel or unusual design feature of the aircraft, aircraft engine or propeller, he prescribes special conditions and amendments thereto for the product. The... for the aircraft, aircraft engine or propeller as the FAA finds necessary to establish a level of...

14 CFR 21.16 - Special conditions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... aircraft, aircraft engine, or propeller because of a novel or unusual design feature of the aircraft, aircraft engine or propeller, he prescribes special conditions and amendments thereto for the product. The... for the aircraft, aircraft engine or propeller as the FAA finds necessary to establish a level of...

14 CFR 21.16 - Special conditions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... aircraft, aircraft engine, or propeller because of a novel or unusual design feature of the aircraft, aircraft engine or propeller, he prescribes special conditions and amendments thereto for the product. The... for the aircraft, aircraft engine or propeller as the FAA finds necessary to establish a level of...

10 CFR 50.34 - Contents of applications; technical information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... capability for containment purging/venting designed to minimize the purging time consistent with ALARA... similarities to and differences from, facilities of similar design for which applications have previously been... to features affecting facility design. Special attention should be directed to the site evaluation...

10 CFR 50.34 - Contents of applications; technical information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... capability for containment purging/venting designed to minimize the purging time consistent with ALARA... similarities to and differences from, facilities of similar design for which applications have previously been... to features affecting facility design. Special attention should be directed to the site evaluation...

A Level Playing Field

ERIC Educational Resources Information Center

Harac, Lani

2004-01-01

In this article, the author features the Universal Design for Learning, a computer-assisted methodology that has enabled special-needs kids in the Boston area to stay in regular classrooms. Developed by a nonprofit group called the Center for Applied Special Technology, the UDL approach--in which students use whatever print or technological tools…

Understanding Game-Based Learning Cultures: Introduction to Special Issue

ERIC Educational Resources Information Center

Engerman, Jason A.; Carr-Chellman, Alison

2017-01-01

This special issue expands our understanding of teaching and learning through video game play, with specific attention to culture. The issue gives insight into the ways educators, researchers, and developers should be discussing and designing for impactful learner-centered game-based learning experiences. The issue features forward-thinking…

Videodiscs in Special Education.

ERIC Educational Resources Information Center

Education Turnkey Systems, Inc., Falls Church, VA.

One of four reports designed to assess the current state of new technologies, the document reviews the current and future 5-year status of videodisc technology in special and regular education. Described first are the history, technological features, and prices of videodisc systems (which consist of a player, programing material stored on a disc,…

40 CFR 265.229 - Special requirements for ignitable or reactive waste.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Special requirements for ignitable or reactive waste. 265.229 Section 265.229 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... qualified chemist or engineer that, to the best of his knowledge and opinion, the design features or...

76 FR 36870 - Special Conditions: Gulfstream Model GVI Airplane; Design Roll Maneuver Requirement for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-23

... airplane will have a novel or unusual design feature associated with an electronic flight control system... load condition at design maneuvering speed (V A ), in which the cockpit roll control is returned to... positive maneuvering factor used in design. In determining the resulting control surface deflections, the...

Practical Guide to HVAC for Schools.

ERIC Educational Resources Information Center

ASHRAE Journal, 1998

1998-01-01

Features six articles on heating, ventilation, and air-conditioning systems for schools. Examines how to avoid air temperature complaints when choosing a system; special system features; engineers, indoor air quality, and schools; mechanical systems noise in classrooms; operation and management issues related to design; and details on bids and…

7 CFR 1980.310 - Loan purposes.

Code of Federal Regulations, 2011 CFR

2011-01-01

... cellars. Incidental expenses for tax monitoring services, architectural, appraisal, survey, environmental... to pay. (b) Special design features or equipment necessary to accommodate a physically disabled...

7 CFR 1980.310 - Loan purposes.

Code of Federal Regulations, 2012 CFR

2012-01-01

... cellars. Incidental expenses for tax monitoring services, architectural, appraisal, survey, environmental... to pay. (b) Special design features or equipment necessary to accommodate a physically disabled...

Examining the Methods for Investigating Behavioral Clues of Special-Schooled Children

ERIC Educational Resources Information Center

Hussein, Hazreena; Daud, Md Nasir

2015-01-01

This article discusses the authors' use of a combination of methods to understand the engagement of special needs children with design features in sensory gardens at two schools in Britain. In addition to observation and behavior mapping, we interviewed landscape architects, teachers, and therapists to anticipate the children's behavior when…

The Impact of Memory Demands on Audience Design during Language Production

ERIC Educational Resources Information Center

Horton, W.S.; Gerrig, R.J.

2005-01-01

Speakers often tailor their utterances to the needs of particular addressees-a process called audience design. We argue that important aspects of audience design can be understood as emergent features of ordinary memory processes. This perspective contrasts with earlier views that presume special processes or representations. To support our…

Master Classrooms: Classroom Design with Technology in Mind.

ERIC Educational Resources Information Center

Conway, Kathryn

Technology is changing the classroom requiring new design features and considerations to make the classroom flexible and interactive with the teaching process. The design of a Master Classroom, a product of the Classroom Improvement Project at the University of North Carolina at Chapel Hill, is described. These classrooms are specially-equipped to…

Nuclear Powerplant Safety: Design and Planning.

ERIC Educational Resources Information Center

Department of Energy, Washington, DC. Nuclear Energy Office.

The most important concern in the design, construction and operation of nuclear powerplants is safety. Nuclear power is one of the major contributors to the nation's supply of electricity; therefore, it is important to assure its safe use. Each different type of powerplant has special design features and systems to protect health and safety. One…

76 FR 63823 - Special Conditions: Gulfstream Aerospace LP (GALP) Model G280 Airplane Pilot-Compartment View...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-14

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 25 [Docket No. NM457; Notice No. 25-449-SC] Special Conditions: Gulfstream Aerospace LP (GALP) Model G280 Airplane Pilot... Gulfstream Aerospace LP (GALP) Model G280 airplane. This airplane will have a novel or unusual design feature...

ICT and Knowledge Construction: Towards New Features for the Socio-Technical Approach

ERIC Educational Resources Information Center

Cartelli, Antonio

2007-01-01

Purpose: The purpose of this paper is to provide an analysis and review of the sociotechnical approach as a result of analysis of experiences with the introduction of ICT in higher education. Design/methodology/approach: The experiences of the author with the creation of special web sites in palaeography are analysed paying special attention to…

75 FR 27662 - Special Conditions: Boeing 747-468, Installation of a Medical Lift

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-18

...; Notice No. 25-99-11-SC] Special Conditions: Boeing 747-468, Installation of a Medical Lift AGENCY... Aviation, will have a novel or unusual design feature associated with the installation of a medical lift... modification includes the installation of a medical lift between the main deck and upper deck. The lift allows...

Introduction to the special issue: message design in health communication research.

PubMed

Harrington, Nancy Grant

2015-01-01

Message design is one of the most complex and vibrant research areas in the communication discipline. Based on the preconference of the 2014 Kentucky Conference on Health Communication, this special issue of Health Communication is focused on a broad range of message design concerns. It features 10 original articles addressing topics ranging from fundamental questions related to theory and method to questions of message adaptation for translation and dissemination. Together, these articles reflect the rich variety of health behaviors addressed by health communication researchers and the breadth and depth of theoretical, methodological, and practical approaches to be considered in message design research.

78 FR 76248 - Special Conditions: Airbus, Model A350-900 Series Airplane; Side Stick Controller

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

... control columns and wheels. This kind of controller is designed for only one-hand operation. The... same subject: For the Airbus Model A350-900 series airplane equipped with stick controls designed for... Airbus Model A350-900 series airplanes. These airplanes will have a novel or unusual design feature...

78 FR 76254 - Special Conditions: Airbus, Model A350-900 Series Airplane; Control Surface Awareness and Mode...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

... or unusual design features: electronic flight control system providing control surface awareness and... system design must ensure that the flight crew is made suitably aware whenever the primary control means... awareness. 0 b. If the design of the flight control system has multiple modes of operation, a means must be...

76 FR 20490 - Special Conditions: Eurocopter France Model AS350B Series, AS350D, and EC130 Helicopters...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-13

... the system design integrity, system design environmental, and test and analysis requirements) of these... novel or unusual design features when modified by installing the Hoh Aeronautics, Inc. (Hoh) complex..., Regulations and Policy Group (ASW-111), 2601 Meacham Blvd., Fort Worth, Texas 76137; telephone (817) 222-5167...

Urban Culturally and Ethnically Diverse Doctoral Students and Their Perceptions of Doctoral Program Design Features and Procedures: An Evaluation Report

ERIC Educational Resources Information Center

Nevin, Ann I.; Barbetta, Patricia; Cramer, Elizabeth

2009-01-01

The mission for Urban SEALS (Special Education Academic Leaders), a federally funded doctoral preparation program, is to prepare doctoral-level special educators, including those who are culturally and/or linguistically diverse (CLD) to assume leadership roles in the education of urban students with disabilities who are CLD. This report provides…

75 FR 26643 - Special Conditions: Rockwell Collins, Inc., Boeing Model 737-700/-700C/-800/-900 and -900ER...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-12

... -900 ER series airplanes because of a novel or unusual design feature, special conditions are... and -900ER Series Airplanes Equipped With Rockwell HGS- 4000 Head-Up Guidance System With Enhanced.../-700C/-800/-900 and -900ER series airplanes equipped with the Rockwell HGS-4000 Head-Up Guidance System...

Microcomputer-Assisted Needs Assessment System for Teacher Training in Special Education. Final Project Report, 8/1/83 through 5/31/86.

ERIC Educational Resources Information Center

Malouf, David; And Others

The report describes the features, underlying knowledge base, and goals of the "Smart Needs Assessment Program" (SNAP), an interactive, microcomputer-based system designed to provide inservice training in special education for regular education teachers. The Teacher Effectiveness Expert System portion uses teacher data concerning attitudes, goals,…

76 FR 72087 - Special Conditions: Diamond Aircraft Industries, Model DA-40NG; Electronic Engine Control (EEC...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-22

... engine design certification, and the certification requirements for engine control systems are driven by... following novel or unusual design features: Electronic engine control system. Discussion As discussed above...; Electronic Engine Control (EEC) System AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final...

The Community Mental Health Center as a Matrix Organization.

ERIC Educational Resources Information Center

White, Stephen L.

1978-01-01

This article briefly reviews the literature on matrix organizational designs and discusses the ways in which the matrix design might be applied to the special features of a community mental health center. The phases of one community mental health center's experience in adopting a matrix organizational structure are described. (Author)

Ergonomic audit of a specially engineered sonic powered toothbrush with unique sensing and control technologies, the Sonicare Flexcare, and the Oral-B Smart Series 5000.

PubMed

Hunter, Gail; Burns, Laurie; Bone, Brian; Mintel, Thomas; Jimenez, Eduardo

2012-01-01

The presence of ergonomic features can impact the marketplace success of a new product. Metaphase Design Group, Inc., in partnership with the Colgate-Palmolive Company, conducted an ergonomic audit on three electric toothbrushes: a specially engineered sonic powered toothbrush with unique sensing and control technologies, the Sonicare FlexCare, and the Oral-B Smart Series 5000. The ergonomic audit was conducted by Metaphase Design Groups's ergonomic and usability experts. Two experts used the toothbrushes over a one-week period and assessed the performance of each brush against a set of ergonomic principles. The three toothbrushes have some solid ergonomic features. They each have adequate grip zones, provide grip security with elastomeric materials, and provide easy access to the on/off button. The most distinctive feature is the longitudinal shape of the handle of the specially engineered sonic powered toothbrush with unique sensing and control technologies. This handle angles downward at the top end and provides additional advantages through improved grip security and visibility. Yet all three toothbrushes have different opportunities for improvement. The Sonicare Flex Care toothbrush has a cluttered and complicated user interface that is difficult to read. The disadvantages of the Oral-B Smart Series 5000 toothbrush are related to its physical dimensions and audible feedback. The specially engineered sonic powered toothbrush with unique sensing afid control technologies is surprising to use with its changes in speeds, brush movements, and resulting changes in audible feedback.

75 FR 50688 - Special Conditions: Erickson Air-Crane Incorporated S-64E and S-64F Rotorcraft

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-17

...) model S-64E and S-64F rotorcraft. These rotorcraft have novel or unusual design features associated with being transport category rotorcraft designed only for use in heavy external-load operations. At the time...) Powerplant Instruments. At the time of original certification, the S-64 had a novel design of being powered...

78 FR 11089 - Special Conditions: Bombardier Aerospace, Model BD-500-1A10 and BD-500-1A11 Airplanes; Sidestick...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-15

... controller instead of a conventional control column and wheel. This kind of controller is designed for only... following novel or unusual design feature: A sidestick controller instead of a conventional control column... conventional wheel or control stick. This kind of controller is designed to be operated using only one hand...

78 FR 11562 - Special Conditions: Embraer S.A., Model EMB-550 Airplanes; Flight Envelope Protection: High Speed...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-19

... control surfaces. The Model EMB-550 airplane is designed for 8 passengers, with a maximum of 12 passengers... the pilot or copilot sidestick. The longitudinal control law design of the Embraer S.A. Model EMB- 550... EMB-550 airplane. This airplane will have a novel or unusual design feature, specifically an...

Special electrical machines: Sources and converters of energy

NASA Astrophysics Data System (ADS)

Bertinov, A. I.; But, D. A.; Miziurin, S. R.; Alievskii, B. L.; Sineva, N. V.

The principles underlying the operation of electromechanical and dynamic energy converters are discussed, along with those for the direct conversion of solar, thermal, and chemical energy into electrical energy. The theory for electromechanical and dynamic converters is formulated using a generalized model for the electromechanical conversion of energy. Particular attention is given to electrical machinery designed for special purposes. Features of superconductor electrical machines are discussed.

75 FR 12965 - Special Conditions: Airbus Model A318, A319, A320, and A321 Series Airplanes; Seats With Non...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

...-traditional, large, non-metallic panels. In order to provide a level of safety that is equivalent to that... Airplanes; Seats With Non-Traditional, Large, Non-Metallic Panels AGENCY: Federal Aviation Administration... a novel or unusual design feature(s) associated with seats that include non-traditional, large, non...

Cooling urban heat islands with sustainable landscapes

Treesearch

E. Gregory McPherson

1994-01-01

This paper is directed to the policy-makers who are responsible for urban design and its climatological consequences. It summarizes our current knowledge on the structure, energetics, and mitigation of the urban heat island. Special attention is given to physical features of the environment that can be easily manipulated, particularly vegetation. Prototypical designs...

76 FR 14795 - Special Conditions: Gulfstream Model GVI Airplane; Electronic Flight Control System Mode...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

...). Novel or Unusual Design Features The GVI will have a fly-by-wire electronic flight control system. This... type certification basis for Gulfstream GVI airplanes. If the design of the flight control system has... Control System Mode Annunciation. AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final...

75 FR 77569 - Special Conditions: Gulfstream Model GVI Airplane; Electronic Flight Control System Mode...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-13

... Unusual Design Features The GVI will have a fly-by-wire electronic flight control system. This system... the design of the flight control system has multiple modes of operation, a means must be provided to... Control System Mode Annunciation AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of...

PROFILES OF SIGNIFICANT SCHOOLS--HEATHCOTE ELEMENTARY SCHOOL, SCARSDALE, NEW YORK.

ERIC Educational Resources Information Center

WEINSTOCK, RUTH

THE DESIGN OF THE HEATHCOTE ELEMENTARY SCHOOL WAS INVESTIGATED IN TERMS OF THE SCHOOL'S EDUCATIONAL PROGRAM, ARCHITECTURAL INNOVATIONS IN DESIGN, AND SPECIAL FEATURES OF INTEREST. THE PLANNERS OF HEATHCOTE WERE COMMITTED TO TWO FUNDAMENTAL PRINCIPLES OF EDUCATION--ONE DEALING WITH THE CONDITIONS UNDER WHICH CHILDREN LEARN BEST, THE OTHER DEALING…

NIF Rugby High Foot Campaign from the design side

NASA Astrophysics Data System (ADS)

Leidinger, J.-P.; Callahan, D. A.; Berzak-Hopkins, L. F.; Ralph, J. E.; Amendt, P.; Hinkel, D. E.; Michel, P.; Moody, J. D.; Ross, J. S.; Rygg, J. R.; Celliers, P.; Clouët, J.-F.; Dewald, E. L.; Kaiser, P.; Khan, S.; Kritcher, A. L.; Liberatore, S.; Marion, D.; Masson-Laborde, P.-E.; Milovich, J. L.; Morice, O.; Pak, A. E.; Poujade, O.; Strozzi, D.; Hurricane, O. A.

2016-05-01

The NIF Rugby High Foot campaign results, with 8 shots to date, are compared with the 2D FCI2 design simulations. A special emphasis is placed on the predictive features and on those areas where some work is still required to achieve the best possible modelling of these MJ-class experiments.

77 FR 67251 - Special Conditions: Boeing Model 757 Series Airplanes; Seats with Non-Traditional, Large, Non...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-09

..., large, non-metallic panels in their designs. In order to provide a level of safety that is equivalent to... with Non-Traditional, Large, Non-Metallic Panels AGENCY: Federal Aviation Administration (FAA), DOT... have novel or unusual design features associated with seats that include non-traditional, large, non...

Class Outdoors in the District of Columbia

EPA Pesticide Factsheets

Specially-designed outdoor education areas surrounded by rain gardens and other green features have been added to the grounds of three District of Columbia schools, providing students with hands-on learning experiences while reducing stormwater pollution.

Special Feature: Teaching about High Tech.

ERIC Educational Resources Information Center

Kopf, Michael; And Others

1992-01-01

Includes four articles: "Virtual Reality" (Kopf), description of its uses in computer-assisted design, architecture, and technical training; "SME (Society of Manufacturing Engineers) Robotics Contest Opens Doors to Future" (Wagner); "Superconductivity" (Canady), description of classroom demonstrations and experiments;…

Irradiation Testing Vehicles for Fast Reactors from Open Test Assemblies to Closed Loops

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sienicki, James J.; Grandy, Christopher

A review of irradiation testing vehicle approaches and designs that have been incorporated into past Sodium-Cooled Fast Reactors (SFRs) or envisioned for incorporation has been carried out. The objective is to understand the essential features of the approaches and designs so that they can inform test vehicle designs for a future U.S. Fast Test Reactor. Fast test reactor designs examined include EBR-II, FFTF, JOYO, BOR-60, PHÉNIX, JHR, and MBIR. Previous designers exhibited great ingenuity in overcoming design and operational challenges especially when the original reactor plant’s mission changed to an irradiation testing mission as in the EBRII reactor plant. Themore » various irradiation testing vehicles can be categorized as: Uninstrumented open assemblies that fit into core locations; Instrumented open test assemblies that fit into special core locations; Self-contained closed loops; and External closed loops. A special emphasis is devoted to closed loops as they are regarded as a very desirable feature of a future U.S. Fast Test Reactor. Closed loops are an important technology for irradiation of fuels and materials in separate controlled environments. The impact of closed loops on the design of fast reactors is also discussed in this report.« less

Features and technologies of ERS-1 (ESA) and X-SAR antennas

NASA Technical Reports Server (NTRS)

Schuessler, R.; Wagner, R.

1986-01-01

Features and technologies of planar waveguide array antennas developed for spaceborne microwave sensors are described. Such antennas are made from carbon fiber reinforced plastic (CFRP) employing special manufacturing and metallization techniques to achieve satisfactory electrical properties. Mechanical design enables deployable antenna structures necessary for satellite applications (e.g., ESA ERS-1). The slotted waveguide concept provides high aperture efficiency, good beamshaping capabilities, and low losses. These CFRP waveguide antennas feature low mass, high accuracy and stiffness, and can be operated within wide temperature ranges.

77 FR 43796 - Endangered and Threatened Wildlife and Plants; Designation of Critical Habitat for the Lost River...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

... essential to the conservation of the species should be included in the designation and why; (c) Special management considerations or protection that may be needed for the physical and biological features essential... our criteria for being essential for the conservation of the species and, therefore, should be...

77 FR 64025 - Special Conditions: Airbus Model A318, A319, A320, and A321 Series Airplanes; Interaction of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-18

... series airplanes with modification 160023 (Sharklet). These airplanes will have novel or unusual design... novel or unusual design features on the model series of airplanes listed above. It is not a rule of... Series Airplanes; Interaction of Systems and Structures AGENCY: Federal Aviation Administration (FAA...

Fifteen year performance review of Michigan's European concrete pavement.

DOT National Transportation Integrated Search

2010-02-01

In 1993, a special pavement demonstration project was constructed in Detroit on NB I-75 to evaluate the design features of some highly acclaimed European rigid pavements. The Michigan Department of Transportation (MDOT) and the Federal Highway Admini...

Twenty year performance review of Michigan's European concrete pavement.

DOT National Transportation Integrated Search

2013-10-01

In 1993, a special pavement demonstration project was constructed in Detroit on NB I-75 to evaluate the design features of some highly acclaimed European rigid pavements. The Michigan Department of Transportation (MDOT) and the Federal Highway Admini...

Structural Health Monitoring for a Z-Type Special Vehicle

PubMed Central

Yuan, Chaolin; Ren, Liang; Li, Hongnan

2017-01-01

Nowadays there exist various kinds of special vehicles designed for some purposes, which are different from regular vehicles in overall dimension and design. In that case, accidents such as overturning will lead to large economical loss and casualties. There are still no technical specifications to follow to ensure the safe operation and driving of these special vehicles. Owing to the poor efficiency of regular maintenance, it is more feasible and effective to apply real-time monitoring during the operation and driving process. In this paper, the fiber Bragg grating (FBG) sensors are used to monitor the safety of a z-type special vehicle. Based on the structural features and force distribution, a reasonable structural health monitoring (SHM) scheme is presented. Comparing the monitoring results with the finite element simulation results guarantees the accuracy and reliability of the monitoring results. Large amounts of data are collected during the operation and driving progress to evaluate the structural safety condition and provide reference for SHM systems developed for other special vehicles. PMID:28587161

Ventilation and ventilators.

PubMed

Hayes, B

1982-01-01

The history of ventilation is reviewed briefly and recent developments in techniques of ventilation are discussed. Operating features of ventilators have changed in the past few years, partly as the result of clinical progress; yet, technology appears to have outstripped the clinician's ability to harness it most effectively. Clinical discipline and training of medical staff in the use of ventilators could be improved. The future is promising if clinician and designer can work together closely. Ergonomics of ventilators and their controls and the provision of alarms need special attention. Microprocessors are likely to feature prominently in the next generation of designs.

Some Aspects of an Air-Core Single-Coil Magnetic Suspension System

NASA Technical Reports Server (NTRS)

Hamlet, Irvin L.; Kilgore, Robert A.

1966-01-01

This paper presents some of the technical aspects in the development at the Langley Research Center of an air-cove, dual-wound, single-coil, magnetic-suspension system with one-dimensional control. Overall electrical system design features and techniques are discussed in addition to the problems of control and stability. Special treatment is given to the operation of a dual-wound, high-current support coil which provides the bias fields and superimposed modulated field. Other designs features include a six-phase, solid-state power stage for modulation of the relatively large magnitude control current, and an associated six-phase trigger circuit.

Reducing the dimensions of acoustic devices using anti-acoustic-null media

NASA Astrophysics Data System (ADS)

Li, Borui; Sun, Fei; He, Sailing

2018-02-01

An anti-acoustic-null medium (anti-ANM), a special homogeneous medium with anisotropic mass density, is designed by transformation acoustics (TA). Anti-ANM can greatly compress acoustic space along the direction of its main axis, where the size compression ratio is extremely large. This special feature can be utilized to reduce the geometric dimensions of classic acoustic devices. For example, the height of a parabolic acoustic reflector can be greatly reduced. We also design a brass-air structure on the basis of the effective medium theory to materialize the anti-ANM in a broadband frequency range. Numerical simulations verify the performance of the proposed anti-ANM.

Special Issue on Expert Systems for Department of Defense Training.

ERIC Educational Resources Information Center

Ahlers, Robert H., Ed.; And Others

1986-01-01

Features articles on topics related to use of expert systems for training: machine intelligence effectiveness in military systems applications; automated maneuvering board training system; intelligent tutoring system for electronic troubleshooting; technology development for intelligent maintenance advisors; design of intelligent computer assisted…

How to Quickly Import CAD Geometry into Thermal Desktop

NASA Technical Reports Server (NTRS)

Wright, Shonte; Beltran, Emilio

2002-01-01

There are several groups at JPL (Jet Propulsion Laboratory) that are committed to concurrent design efforts, two are featured here. Center for Space Mission Architecture and Design (CSMAD) enables the practical application of advanced process technologies in JPL's mission architecture process. Team I functions as an incubator for projects that are in the Discovery, and even pre-Discovery proposal stages. JPL's concurrent design environment is to a large extent centered on the CAD (Computer Aided Design) file. During concurrent design sessions CAD geometry is ported to other more specialized engineering design packages.

Concrete Masonry Designs: Educational Issue.

ERIC Educational Resources Information Center

Hertzberg, Randi, Ed.

2001-01-01

This special journal issue addresses concrete masonry in educational facilities construction. The issue's feature articles are: (1) "It Takes a Village To Construct a Massachusetts Middle School," describing a middle school constructed almost entirely of concrete masonry and modeled after a typical small New England village; (2)…

HOME - An application of fault-tolerant techniques and system self-testing. [independent computer for helicopter flight control command monitoring

NASA Technical Reports Server (NTRS)

Holden, D. G.

1975-01-01

Hard Over Monitoring Equipment (HOME) has been designed to complement and enhance the flight safety of a flight research helicopter. HOME is an independent, highly reliable, and fail-safe special purpose computer that monitors the flight control commands issued by the flight control computer of the helicopter. In particular, HOME detects the issuance of a hazardous hard-over command for any of the four flight control axes and transfers the control of the helicopter to the flight safety pilot. The design of HOME incorporates certain reliability and fail-safe enhancement design features, such as triple modular redundancy, majority logic voting, fail-safe dual circuits, independent status monitors, in-flight self-test, and a built-in preflight exerciser. The HOME design and operation is described with special emphasis on the reliability and fail-safe aspects of the design.

Land-Based Dlischarge Environmental Assessment at Beale Air Force Base, California

DTIC Science & Technology

2009-09-01

Attainment Designations ................. 3-3 3-3 Federally Listed Species Evaluated...drain pit includes special design features to ensure that drained effluent does not enter Hutchinson Creek. The drain pit would consist of a pipe with...The cattle fence would consist of metal T- posts , five-strand cattle wire, and a standard cattle gate with wooden posts . The wooden posts would be

77 FR 56525 - Special Conditions: Bombardier, Model CL-600-2B16 Airplane (CL-601-3A, CL-601-3R, and CL-604...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-13

... and CL- 604. This airplane, as modified by Atlantic Aero, Inc., will have a novel or unusual design... airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These... documents or comments received may be read at http://www.regulations.gov/ at any time. Follow the online...

Solid propellant processing factor in rocket motor design

NASA Technical Reports Server (NTRS)

1971-01-01

The ways are described by which propellant processing is affected by choices made in designing rocket engines. Tradeoff studies, design proof or scaleup studies, and special design features are presented that are required to obtain high product quality, and optimum processing costs. Processing is considered to include the operational steps involved with the lining and preparation of the motor case for the grain; the procurement of propellant raw materials; and propellant mixing, casting or extrusion, curing, machining, and finishing. The design criteria, recommended practices, and propellant formulations are included.

[Current Knee Arthroplasty Designs and Kinematics: Differences in Radii, Conformity and Pivoting].

PubMed

Calliess, Tilman; Savov, Peter; Ettinger, Max; Karkosch, Roman

2018-06-14

Today, there is an almost endless variety of knee prosthesis models on the market from which the surgeon can choose. Although the designs appear closer and closer to one another, the industry makes a great effort to emphasise different features as beneficial and a stand-alone. It is increasingly difficult to keep an overview and to assess the clinical relevance of the diverse features. There is a clear lack of independent comparative studies and evidence is low. Nevertheless, different design philosophies require special surgical techniques, so that the surgeon must be familiar with the peculiarity of his/her prosthesis. Also, a differentiated indication for different designs appears to be an interesting concept. The aim of this essay is to give a brief overview of the major design concepts of current unconstrained knee prosthesis designs and their differences regarding biomechanics and kinematics. Georg Thieme Verlag KG Stuttgart · New York.

CIRCAL-2 - General-purpose on-line circuit design.

NASA Technical Reports Server (NTRS)

Dertouzos, M. L.; Jessel, G. P.; Stinger, J. R.

1972-01-01

CIRCAL-2 is a second-generation general-purpose on-line circuit-design program with the following main features: (1) multiple-analysis capability; (2) uniform and general data structures for handling text editing, network representations, and output results, regardless of analysis; (3) special techniques and structures for minimizing and controlling user-program interaction; (4) use of functionals for the description of hysteresis and heat effects; and (5) ability to define optimization procedures that 'replace' the user. The paper discusses the organization of CIRCAL-2, the aforementioned main features, and their consequences, such as a set of network elements and models general enough for most analyses and a set of functions tailored to circuit-design requirements. The presentation is descriptive, concentrating on conceptual rather than on program implementation details.

Ambulance ride: fixed or floating stretcher?

PubMed Central

Snook, R; Pacifico, R

1976-01-01

The alternatives of a purpose-bult ambulance and a specially designed stretcher suspension system were considered and the features of the latter assessed by subjective and objective tests. The results showed a significant improvement in the quality of the ride offered to the patient. Images FIG 2 PMID:947448

78 FR 75451 - Special Conditions: Cessna Model 750 Series Airplanes; Aircraft Electronic System Security...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-12

... design feature associated with the architecture and connectivity capabilities of the airplanes' computer... the comment for an association, business, labor union, etc.). DOT's complete Privacy Act Statement can...; facsimile 425-227-1149. SUPPLEMENTARY INFORMATION: The proposed network architecture includes the following...

76 FR 36861 - Special Conditions: Gulfstream Model GVI Airplane; Electronic Systems Security Isolation or...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-23

... incorporate the following novel or unusual design features: Digital systems architecture composed of several connected networks. The proposed architecture and network configuration may be used for, or interfaced with... navigation systems (aircraft control domain), 2. Airline business and administrative support (airline...

78 FR 73993 - Special Conditions: Cessna Model 680 Series Airplanes; Aircraft Electronic System Security...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-10

... design feature associated with the architecture and connectivity capabilities of the airplanes' computer... vulnerabilities to the airplanes' systems. The proposed network architecture includes the following connectivity.... Operator business and administrative support systems, and 3. Passenger entertainment systems, and access by...

Valve technology: A compilation

NASA Technical Reports Server (NTRS)

1971-01-01

A technical compilation on the types, applications and modifications to certain valves is presented. Data cover the following: (1) valves that feature automatic response to stimuli (thermal, electrical, fluid pressure, etc.), (2) modified valves changed by redesign of components to increase initial design effectiveness or give the item versatility beyond its basic design capability, and (3) special purpose valves with limited application as presented, but lending themselves to other uses with minor changes.

7 CFR 3550.102 - Grant and loan purposes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... used to make general repairs and improvements to properties or to remove health and safety hazards, as...) The cost of providing special design features or equipment when necessary because of a physical... pro rata installation costs for utilities such as water, sewer, electricity, and gas for which the...

Evaluation of an Application for Making Palmtop Computers Accessible to Individuals with Intellectual Disabilities

ERIC Educational Resources Information Center

Stock, Steven E.; Davies, Daniel K.; Davies, Katelyn R.; Wehmeyer, Michael L.

2006-01-01

Background: Palmtop computers provide a promising mobile platform to address barriers to computer-based supports for people with intellectual disabilities. This study evaluated a specially designed interface to make navigation and features of palmtop computers more accessible to users with intellectual disabilities. Method: The specialised…

Using Web-Based Practice to Enhance Mathematics Learning and Achievement

ERIC Educational Resources Information Center

Nguyen, Diem M.; Kulm, Gerald

2005-01-01

This article describes 1) the special features and accessibility of an innovative web-based practice instrument (WebMA) designed with randomized short-answer, matching and multiple choice items incorporated with automatically adapted feedback for middle school students; and 2) an exploratory study that compares the effects and contributions of…

76 FR 25229 - Special Conditions: Gulfstream Aerospace LP (GALP) Model G250 Airplane, Dynamic Test Requirements...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-04

..., Dynamic Test Requirements for Side-Facing, Single-Occupant Seats AGENCY: Federal Aviation Administration... or unusual design feature associated with dynamic test requirements for side-facing, single-occupant..., Aircraft Certification Service, 1601 Lind Avenue, SW., Renton, Washington 98057- 3356; telephone (425) 227...

SPIRES Tailored to a Special Library: A Mainframe Answer for a Small Online Catalog.

ERIC Educational Resources Information Center

Newton, Mary

1989-01-01

Describes the design and functions of a technical library database maintained on a mainframe computer and supported by the SPIRES database management system. The topics covered include record structures, vocabulary control, input procedures, searching features, time considerations, and cost effectiveness. (three references) (CLB)

Recommendations for yield-to-bus traffic control devices and bus pullout bays design characteristics.

DOT National Transportation Integrated Search

2013-04-01

Traffic control devices such as roadside signs and pavement markings are used to promote highway safety and efficiency for all road users. A bus pullout bay is a special geometric roadway feature that allows transit buses to stop outside the travel l...

77 FR 36123 - Special Conditions: Gulfstream Aerospace LP (GALP), Model Gulfstream G280 Airplane; Aircraft...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-18

... architecture and connectivity capabilities of the airplane's computer systems and networks, which may allow... an association, business, labor union, etc.). DOT's complete Privacy Act Statement can be found in... or unusual design features: Digital systems architecture composed of several connected networks. The...

78 FR 68986 - Special Conditions: Boeing Model 777-200, -300, and -300ER Series Airplanes; Aircraft Electronic...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-18

... The Boeing Company, will have novel or unusual design features associated with the architecture and... proposed architecture is novel or unusual for commercial transport airplanes by enabling connection to... system architecture or electronic access to aircraft systems. Furthermore, regulations and current system...

78 FR 65153 - Special Conditions: Learjet Model 45 Series Airplanes; Aircraft Electronic System Security...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... design feature associated with the architecture and connectivity capabilities of the airplanes' computer... the comment (or signing the comment for an association, business, labor union, etc.). DOT's complete... passengers and two crew members. The proposed Learjet Model 45 avionics architecture is new and novel for...

Safety and General Considerations for the Use of Antibodies in Infectious Diseases.

PubMed

Hey, Adam Seidelin

2017-01-01

Monocolonal antibodies are valuable potential new tools for meeting unmet needs in treating infectious dieseases and to provide alternatives and supplements to antibiotics in these times of growing resistance. Especially when considering the ability to screen for antibodies reacting to very diverse target antigens and the ability to design and engineer them to work specifically to hit and overcome their strategies, like toxins and their hiding in specific cells to evade the immuneresponse and their special features enabling killing of the infectious agents and or the cells harbouring them. Antibodies are generally very safe and adverse effects of treatments with therapeutic antibodies are usually related to exaggeration of the intended pharmacology. In this chapter general safety considerations for the use of antibodies is reviewed and the general procedures for nonclinical testing to support their clinical development. Special considerations for anti-infective mAb treatments are provided including the special features that makes nonclinical safety programs for anti-infective mAbs much more simple and restricted. However at a cost since only limited information for clinical safety and modeling can be derived from such programs. Then strategies for optimally designing antibodies are discussed including the use of combination of antibodies. Finally ways to facilitate development of more than the currently only three approved mAb based treatments are discussed with a special focus on high costs and high price and how collaboration and new strategies for development in emerging markets can be a driver for this.

Specializing architectures for the type 2 diabetes mellitus care use cases with a focus on process management.

PubMed

Uribe, Gustavo A; Blobel, Bernd; López, Diego M; Ruiz, Alonso A

2015-01-01

The development of software supporting inter-disciplinary systems like the type 2 diabetes mellitus care requires the deployment of methodologies designed for this type of interoperability. The GCM framework allows the architectural description of such systems and the development of software solutions based on it. A first step of the GCM methodology is the definition of a generic architecture, followed by its specialization for specific use cases. This paper describes the specialization of the generic architecture of a system, supporting Type 2 diabetes mellitus glycemic control, for a pharmacotherapy use case. It focuses on the behavioral aspect of the system, i.e. the policy domain and the definition of the rules governing the system. The design of this architecture reflects the inter-disciplinary feature of the methodology. Finally, the resulting architecture allows building adaptive, intelligent and complete systems.

Feature binding in visual short-term memory is unaffected by task-irrelevant changes of location, shape, and color.

PubMed

Logie, Robert H; Brockmole, James R; Jaswal, Snehlata

2011-01-01

Three experiments used a change detection paradigm across a range of study-test intervals to address the respective contributions of location, shape, and color to the formation of bindings of features in sensory memory and visual short-term memory (VSTM). In Experiment 1, location was designated task irrelevant and was randomized between study and test displays. The task was to detect changes in the bindings between shape and color. In Experiments 2 and 3, shape and color, respectively, were task irrelevant and randomized, with bindings tested between location and color (Experiment 2) and location and shape (Experiment 3). At shorter study-test intervals, randomizing location was most disruptive, followed by shape and then color. At longer intervals, randomizing any task-irrelevant feature had no impact on change detection for bindings between features, and location had no special role. Results suggest that location is crucial for initial perceptual binding but loses that special status once representations are formed in VSTM, which operates according to different principles, than do visual attention and perception.

Design of state-feedback controllers including sensitivity reduction, with applications to precision pointing

NASA Technical Reports Server (NTRS)

Hadass, Z.

1974-01-01

The design procedure of feedback controllers was described and the considerations for the selection of the design parameters were given. The frequency domain properties of single-input single-output systems using state feedback controllers are analyzed, and desirable phase and gain margin properties are demonstrated. Special consideration is given to the design of controllers for tracking systems, especially those designed to track polynomial commands. As an example, a controller was designed for a tracking telescope with a polynomial tracking requirement and some special features such as actuator saturation and multiple measurements, one of which is sampled. The resulting system has a tracking performance comparing favorably with a much more complicated digital aided tracker. The parameter sensitivity reduction was treated by considering the variable parameters as random variables. A performance index is defined as a weighted sum of the state and control convariances that sum from both the random system disturbances and the parameter uncertainties, and is minimized numerically by adjusting a set of free parameters.

Online 3D Ear Recognition by Combining Global and Local Features.

PubMed

Liu, Yahui; Zhang, Bob; Lu, Guangming; Zhang, David

2016-01-01

The three-dimensional shape of the ear has been proven to be a stable candidate for biometric authentication because of its desirable properties such as universality, uniqueness, and permanence. In this paper, a special laser scanner designed for online three-dimensional ear acquisition was described. Based on the dataset collected by our scanner, two novel feature classes were defined from a three-dimensional ear image: the global feature class (empty centers and angles) and local feature class (points, lines, and areas). These features are extracted and combined in an optimal way for three-dimensional ear recognition. Using a large dataset consisting of 2,000 samples, the experimental results illustrate the effectiveness of fusing global and local features, obtaining an equal error rate of 2.2%.

Online 3D Ear Recognition by Combining Global and Local Features

PubMed Central

Liu, Yahui; Zhang, Bob; Lu, Guangming; Zhang, David

2016-01-01

The three-dimensional shape of the ear has been proven to be a stable candidate for biometric authentication because of its desirable properties such as universality, uniqueness, and permanence. In this paper, a special laser scanner designed for online three-dimensional ear acquisition was described. Based on the dataset collected by our scanner, two novel feature classes were defined from a three-dimensional ear image: the global feature class (empty centers and angles) and local feature class (points, lines, and areas). These features are extracted and combined in an optimal way for three-dimensional ear recognition. Using a large dataset consisting of 2,000 samples, the experimental results illustrate the effectiveness of fusing global and local features, obtaining an equal error rate of 2.2%. PMID:27935955

[The peculiar features of the sidewise collision involving a pedestrian and an automobile moving in the reverse gear along an arc of a circle].

PubMed

Leonov, S V; Pinchuk, P V; Shakir'janova, Ju P

This article was designed to report the results of the analysis of the consequences of a real case of the sidewise collision and run-over involving a pedestrian and an automobile moving in the reverse gear along an arc of a circle. Special attention was given to the mechanism behind the collision, its peculiar features, and characteristic damages inflicted to the pedestrian's body and clothes.

Test probe for surface mounted leadless chip carrier

DOEpatents

Meyer, Kerry L.; Topolewski, John

1989-05-23

A test probe for a surface mounted leadless chip carrier is disclosed. The probed includes specially designed connector pins which allow size reductions in the probe. A thermoplastic housing provides spring action to ensure good mechanical and electrical contact between the pins and the contact strips of a leadless chip carrier. Other features include flexible wires molded into the housing and two different types of pins alternately placed in the housing. These features allow fabrication of a smaller and simpler test probe.

Test probe for surface mounted leadless chip carrier

DOEpatents

Meyer, K.L.; Topolewski, J.

1987-10-02

A test probe for a surface mounted leadless chip carrier is disclosed. The probe includes specially designed connector pins which allow size reductions in the probe. A thermoplastic housing provides spring action to ensure good mechanical and electrical contact between the pins and the contact strips of a leadless chip carrier. Other features include flexible wires molded into the housing and two different types of pins alternately placed in the housing. These features allow fabrication of a smaller and simpler test probe. 1 fig.

Planetary size comparisons: A photographic study

NASA Technical Reports Server (NTRS)

Meszaros, S. P.

1983-01-01

Over the past two decades NASA spacecraft missions obtained photographs permitting accurate size measurements of the planets and moons, and their surface features. Planetary global views are displayed at the same scale, in each picture to allow visual size comparisons. Additionally, special geographical features on some of the planets are compared with selected Earth areas, again at the same scale. Artist renderings and estimated sizes are used for worlds not yet reached by spacecraft. Included with each picture is number designation for use in ordering copies of the photos.

Cultural Diversity Awareness Inventory = Inventario Sobre el Reconocimiento de Diversas Culturas.

ERIC Educational Resources Information Center

Henry, Gertrude B.

This booklet features a checklist designed to help persons who are involved in providing direct services to culturally diverse, young special needs children to assess their attitudes, beliefs, and behavior toward these children. The booklet also contains suggestions and lists of print, film, and filmstrip resources for developing a school program…

Accessibility on the Hudson River

ERIC Educational Resources Information Center

Exceptional Parent, 2010

2010-01-01

This article describes how Beverly and Martin Ryfa, working with an architect who specializes in accessible design, were able to build a house that is handicap accessible for their 9-year-old daughter, Danielle, who suffered an intraventricular hemorrhage when she was three days old. The article describes the features of their house that make…

78 FR 65233 - Special Conditions: Bombardier Inc., Models BD-500-1A10 and BD-500-1A11 Series Airplanes...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... a novel or unusual design feature associated with aluminum-lithium fuselage construction that may... of the Bombardier C-series airplanes will be fabricated using aluminum-lithium construction. Structure fabricated from aluminum-lithium may provide different levels of protection from post-crash fuel...

Accommodations and Modifications: What Parents Need To Know = Facilidades y modificaciones: Lo que los padres necesitan saber.

ERIC Educational Resources Information Center

Beech, Marty

This English-Spanish language booklet is designed to help parents understand two important features of special education services, accommodations and modifications for students with disabilities. Examples of accommodations and modifications are provided, federal laws requiring schools to provide accommodations and modifications are cited, and…

Catching (and Keeping!) E-Patrons.

ERIC Educational Resources Information Center

Puacz, Jeanne Holba

2002-01-01

Based on experiences of the Vigo County Public Library in Terre Haute, Indiana, this article outlines ways libraries can attract patrons to their Web sites and features that can keep them returning. Discusses marketing and publicity; basic content and special sources and services; attractive and easy-to-use site design; good Web site maintenance;…

75 FR 52614 - Special Conditions: Embraer Model ERJ 170-100 SU Series Airplanes; Seats With Non-Traditional...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-27

... that incorporate non-traditional, large, non-metallic panels. To provide a level of safety equivalent... With Non-Traditional, Large, Non-Metallic Panels AGENCY: Federal Aviation Administration (FAA), DOT...., will have a novel or unusual design feature associated with seats that include non-traditional, large...

77 FR 57481 - Special Conditions: Embraer S.A., Models EMB-135 and EMB-145 Series; Airplane Seats with Non...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-18

... Series; Airplane Seats with Non-Traditional, Large, Non-Metallic Panels AGENCY: Federal Aviation... have a novel or unusual design feature associated with the airplane seats that have non-traditional, large, non-metallic panels that would affect survivability during a post-crash fire event. The...

77 FR 75066 - Special Conditions: Airbus, A350-900 Series Airplane; Flight Envelope Protection (Icing and Non...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

... Protection (Icing and Non-Icing Conditions); High Incidence Protection and Alpha-Floor Systems AGENCY... or unusual design features associated with flight envelope protection in icing and non- icing... establish a level of safety equivalent to that established by the existing airworthiness standards. DATES...

75 FR 46840 - Special Conditions: Bombardier Inc. Model CL-600-2E25 Series Airplane; Passenger Seats With Non...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-04

... that incorporate non-traditional, large, non-metallic panels. To provide a level of safety equivalent...; Passenger Seats With Non-Traditional, Large, Non-Metallic Panels AGENCY: Federal Aviation Administration... novel or unusual design feature associated with seats that include non- traditional, large, non-metallic...

78 FR 63847 - Special Conditions: Embraer S.A., Model EMB-550 Airplanes; Airplane Electronic System Security...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... design feature associated with the architecture and connectivity capabilities of the airplanes' computer... the comment for an association, business, labor union, etc.). DOT's complete Privacy Act Statement can... architecture for the Embraer Model EMB-550 series of airplanes is composed of several connected networks. This...

78 FR 76252 - Special Conditions: Airbus, Model A350-900 Series Airplane; Isolation or Protection of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

..., business, labor union, etc.). DOT's complete Privacy Act Statement can be found in the Federal Register... unusual design feature: an electronics network system architecture which is new and novel for commercial... series architecture is new and novel for commercial transport airplanes because it allows connection to...

78 FR 76251 - Special Conditions: Airbus, Model A350-900 Series Airplane; Electronic System Security Protection...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

... the comment (or signing the comment for an association, business, labor union, etc.). DOT's complete... design feature: The digital systems architecture for the Airbus Model A350-900 series airplanes is composed of several connected networks. This proposed network architecture is used for a diverse set of...

78 FR 68985 - Special Conditions: Boeing Model 777-200, -300, and -300ER Series Airplanes; Aircraft Electronic...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-18

... modified by the Boeing Company, will have novel or unusual design features associated with the architecture..., and fiber-optic avionics networks. The proposed architecture is novel or unusual for commercial... material did not anticipate this type of system architecture or electronic access to aircraft systems...

76 FR 41142 - Special Conditions; Cessna Aircraft Company Model M680 Airplane; Lithium-ion Battery Installations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-13

... Company Model M680 Airplane; Lithium-ion Battery Installations AGENCY: Federal Aviation Administration... design feature associated with Lithium-ion batteries. The applicable airworthiness regulations do not...) T00012WI for installation of Lithium-ion batteries in the Model 680. The Model 680 is a twin-engine, medium...

Unit: Where Humans Came From, Inspection Pack, First Trial Print.

ERIC Educational Resources Information Center

Australian Science Education Project, Toorak, Victoria.

"Where Humans Came From" is a set of materials designed for use by students (aged 15-16) to assist them in investigating the problem posed in the title. The student book briefly outlines the essential features of four explanations of human origin: special creation (Judeo-Christian, Greek, Australian Aboriginal, American Indian accounts);…

Design and marketing features influencing choice of e-cigarettes and tobacco in the EU.

PubMed

Laverty, Anthony A; Vardavas, Constantine I; Filippidis, Filippos T

2016-10-01

Data were analysed from the 2014 Special Eurobarometer for Tobacco survey. We estimated self-rated importance of various factors in the choice of both tobacco and electronic cigarettes (e-cigarettes) among tobacco smokers who had ever used an e-cigarette. Among ever users of tobacco and e-cigarettes (N = 2430), taste (39.4%), price (39.2%) and amount of nicotine (27.3%) were the most commonly cited reasons for choosing their brand of e-cigarettes. Those aged 15-24 were more likely to cite external packaging [adjusted prevalence ratio (aPR = 2.06, 95% CI 1.00-4.23)] and design features (aPR = 1.99, 1.20-3.29) as important. As further legislation is debated and enacted enhanced regulation of price, design and marketing features of e-cigarettes may help to reduce the appeal of e-cigarettes. © The Author 2016. Published by Oxford University Press on behalf of the European Public Health Association.

Whirl Flutter Studies for a SSTOL Transport Demonstrator

NASA Technical Reports Server (NTRS)

Acree, C. W., Jr.; Hoffman, Krishna

2004-01-01

A proposed new class of aircraft - the Advanced Theater Transport (ATT) will combine strategic range and high payload with 'Super-STOL' (short take-off and landing) capability. It is also proposed to modify a YC-15 into a technology demonstrator with a 20-deg tilt wing; four, eight-bladed propellers; cross-shafted gearboxes and V-22 engines. These constitute a unique combination of design features that potentially affect performance, loads and whirl-mode stability (whirl flutter). NASA Ames Research Center is working with Boeing and Hamilton Sundstrand on technology challenges presented by the concept; the purpose of NASA involvement is to establish requirements for the demonstrator and for early design guidance, with emphasis on whirl flutter. CAMRAD II is being used to study the effects of various design features on whirl flutter, with special attention to areas where such features differ from existing aircraft, notably tiltrotors. Although the stability margins appear to be more than adequate, the concept requires significantly different analytical methods, principally including far more blade modes, than typically used for tiltrotors.

Special Operations Forces and Conventional Forces: Integration, Interoperability, and Interdependence

DTIC Science & Technology

2016-12-07

Phasing Model8 WESBROCK, HARNED, AND PLOUS 88 | FEATURES PRISM 6, no. 3 views on how to design, plan, and execute operat ions and campaigns. The...population-centric” operational environment. SOF views campaign design dif- ferently from the six-phase model in joint doc- trine depicted above.9...U.S. interests. This difference between SOF and CF views of cam- paigning can hamper integration from the start of an operation if components of the

ASTROS: A multidisciplinary automated structural design tool

NASA Technical Reports Server (NTRS)

Neill, D. J.

1989-01-01

ASTROS (Automated Structural Optimization System) is a finite-element-based multidisciplinary structural optimization procedure developed under Air Force sponsorship to perform automated preliminary structural design. The design task is the determination of the structural sizes that provide an optimal structure while satisfying numerous constraints from many disciplines. In addition to its automated design features, ASTROS provides a general transient and frequency response capability, as well as a special feature to perform a transient analysis of a vehicle subjected to a nuclear blast. The motivation for the development of a single multidisciplinary design tool is that such a tool can provide improved structural designs in less time than is currently needed. The role of such a tool is even more apparent as modern materials come into widespread use. Balancing conflicting requirements for the structure's strength and stiffness while exploiting the benefits of material anisotropy is perhaps an impossible task without assistance from an automated design tool. Finally, the use of a single tool can bring the design task into better focus among design team members, thereby improving their insight into the overall task.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bogacz, Alex

Baseline design of the JLEIC booster synchrotron is presented. Its aim is to inject and accumulate heavy ions and protons at 285 MeV, to accelerate them to about 7 GeV, and finally to extract the beam into the ion collider ring. The Figure-8 ring features two 2600 achromatic arcs configured with negative momentum compaction optics, designed to avoid transition crossing for all ion species during the course of acceleration. The lattice also features a specialized high dispersion injection insert optimized to facilitate the transverse phase-space painting in both planes for multi-turn ion injection. Furthermore, the lattice has been optimized tomore » ease chromaticity correction with two families of sextupoles in each plane. The booster ring is configured with super-ferric, 3 Tesla bends. We are presently launching optimization of the booster synchrotron design to operate in the extreme space-charge dominated regime.« less

NEW DEVELOPMENTS AND APPLICATIONS OF SUPERHEATED EMULSIONS: WARHEAD VERIFICATION AND SPECIAL NUCLEAR MATERIAL INTERDICTION.

PubMed

d'Errico, F; Chierici, A; Gattas-Sethi, M; Philippe, S; Goldston, R; Glaser, A

2018-04-25

In recent years, neutron detection with superheated emulsions has received renewed attention thanks to improved detector manufacturing and read-out techniques, and thanks to successful applications in warhead verification and special nuclear material (SNM) interdiction. Detectors are currently manufactured with methods allowing high uniformity of the drop sizes, which in turn allows the use of optical read-out techniques based on dynamic light scattering. Small detector cartridges arranged in 2D matrices are developed for the verification of a declared warhead without revealing its design. For this application, the enabling features of the emulsions are that bubbles formed at different times cannot be distinguished from each other, while the passive nature of the detectors avoids the susceptibility to electronic snooping and tampering. Large modules of emulsions are developed to detect the presence of shielded special nuclear materials hidden in cargo containers 'interrogated' with high energy X-rays. In this case, the enabling features of the emulsions are photon discrimination, a neutron detection threshold close to 3 MeV and a rate-insensitive read-out.

Games for Engaged Learning of Middle School Children with Special Learning Needs

ERIC Educational Resources Information Center

Ke, Fengfeng; Abras, Tatiana

2013-01-01

In this paper, we describe an in situ study that examined the diverse design features and effects of three pre-algebra games for middle school children who have either challenges with learning or different language backgrounds. Data were collected through in-field observation, artifact analysis, school performance report and knowledge test during…

76 FR 12274 - Special Conditions: Bell Helicopter Textron Canada Limited Model 206B and 206L Series Helicopters...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-07

..., Type Certificate Number H2SW. This AP/SAS performs non- critical control functions, since this model... helicopters. These model helicopters will have novel or unusual design features when modified by installing..., Aviation Safety Engineer, FAA, Rotorcraft Directorate, Regulations and Policy Group (ASW-111), 2601 Meacham...

Development of Science Simulations for Mildly Mentally Retarded or Learning Disabled Students. Final Report.

ERIC Educational Resources Information Center

Macro Systems, Inc., Silver Spring, MD.

This final report describes the development of eight computer based science simulations designed for use with middle school mainstreamed students having learning disabilities or mild mental retardation. The total program includes software, a teacher's manual, 3 videos, and a set of 30 activity worksheets. Special features of the software for…

78 FR 14155 - Special Conditions: Learjet Inc., Model LJ-200-1A10 Airplane; Use of Automatic Power Reserve (APR...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

... Automatic Power Reserve (APR), an Automatic Takeoff Thrust Control System (ATTCS), for Go-Around Performance... airplane will have novel or unusual design features associated with utilizing go-around performance credit...: Federal eRegulations Portal: Go to http://www.regulations.gov/ and follow the online instructions for...

78 FR 76734 - Special Conditions: Bombardier Inc., Models BD-500-1A10 and BD-500-1A11 Series Airplanes; Seats...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-19

... Series Airplanes; Seats With Non-Traditional, Large, Non- Metallic Panels AGENCY: Federal Aviation... airplanes will have a novel or unusual design feature associated with seats that include non-traditional, large, non-metallic panels that would affect survivability during a post-crash fire event. The...

A Practical Spanish Grammar for Border Patrol Officers.

ERIC Educational Resources Information Center

Border Patrol Academy, El Paso, TX.

Designed to be used in the Spanish training program for probationary officers at the Border Patrol Academy in El Paso, Texas, this revised 21-lesson traditional grammar text includes special features that make it pertinent to the job of a patrol inspector in the Mexican border area. An extensive appendix is comprised of exercise translations,…

Thermoelectric Products

NASA Technical Reports Server (NTRS)

1988-01-01

Instead of bulky coils and compressors used in conventional refrigeration systems, UST design engineers drew on thermo-electric technology. UST's precision temperature chambers (PTC's) feature small thermoelectric modules that measure not much more than 1 square inch and operate on unique phenomenon of heat exchange. When electric current flows through specialized metallic crystals, heat is produced; when current direction is reversed cooling is produced.

Human body as a set of biometric features identified by means of optoelectronics

NASA Astrophysics Data System (ADS)

Podbielska, Halina; Bauer, Joanna

2005-09-01

Human body posses many unique, singular features that are impossible to copy or forge. Nowadays, to establish and to ensure the public security requires specially designed devices and systems. Biometrics is a field of science and technology, exploiting human body characteristics for people recognition. It identifies the most characteristic and unique ones in order to design and construct systems capable to recognize people. In this paper some overview is given, presenting the achievements in biometrics. The verification and identification process is explained, along with the way of evaluation of biometric recognition systems. The most frequently human biometrics used in practice are shortly presented, including fingerprints, facial imaging (including thermal characteristic), hand geometry and iris patterns.

Small Gas Turbine Combustor Primary Zone Study

NASA Technical Reports Server (NTRS)

Sullivan, R. E.; Young, E. R.; Miles, G. A.; Williams, J. R.

1983-01-01

A development process is described which consists of design, fabrication, and preliminary test evaluations of three approaches to internal aerodynamic primary zone flow patterns: (1) conventional double vortex swirl stabilization; (2) reverse flow swirl stabilization; and (3) large single vortex flow system. Each concept incorporates special design features aimed at extending the performance capability of the small engine combustor. Since inherent geometry of these combustors result in small combustion zone height and high surface area to volume ratio, design features focus on internal aerodynamics, fuel placement, and advanced cooling. The combustors are evaluated on a full scale annular combustor rig. A correlation of the primary zone performance with the overall performance is accomplished using three intrusion type gas sampling probes located at the exit of the primary zone section. Empirical and numerical methods are used for designing and predicting the performance of the three combustor concepts and their subsequent modifications. The calibration of analytical procedures with actual test results permits an updating of the analytical design techniques applicable to small reverse flow annular combustors.

Special requirements for electronic health record systems in ophthalmology.

PubMed

Chiang, Michael F; Boland, Michael V; Brewer, Allen; Epley, K David; Horton, Mark B; Lim, Michele C; McCannel, Colin A; Patel, Sayjal J; Silverstone, David E; Wedemeyer, Linda; Lum, Flora

2011-08-01

The field of ophthalmology has a number of unique features compared with other medical and surgical specialties regarding clinical workflow and data management. This has important implications for the design of electronic health record (EHR) systems that can be used intuitively and efficiently by ophthalmologists and that can promote improved quality of care. Ophthalmologists often lament the absence of these specialty-specific features in EHRs, particularly in systems that were developed originally for primary care physicians or other medical specialists. The purpose of this article is to summarize the special requirements of EHRs that are important for ophthalmology. The hope is that this will help ophthalmologists to identify important features when searching for EHR systems, to stimulate vendors to recognize and incorporate these functions into systems, and to assist federal agencies to develop future guidelines regarding meaningful use of EHRs. More broadly, the American Academy of Ophthalmology believes that these functions are elements of good system design that will improve access to relevant information at the point of care between the ophthalmologist and the patient, will enhance timely communications between primary care providers and ophthalmologists, will mitigate risk, and ultimately will improve the ability of physicians to deliver the highest-quality medical care. Proprietary or commercial interest disclosure may be found after the references. Copyright © 2011 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

Unsupervised quality estimation model for English to German translation and its application in extensive supervised evaluation.

PubMed

Han, Aaron L-F; Wong, Derek F; Chao, Lidia S; He, Liangye; Lu, Yi

2014-01-01

With the rapid development of machine translation (MT), the MT evaluation becomes very important to timely tell us whether the MT system makes any progress. The conventional MT evaluation methods tend to calculate the similarity between hypothesis translations offered by automatic translation systems and reference translations offered by professional translators. There are several weaknesses in existing evaluation metrics. Firstly, the designed incomprehensive factors result in language-bias problem, which means they perform well on some special language pairs but weak on other language pairs. Secondly, they tend to use no linguistic features or too many linguistic features, of which no usage of linguistic feature draws a lot of criticism from the linguists and too many linguistic features make the model weak in repeatability. Thirdly, the employed reference translations are very expensive and sometimes not available in the practice. In this paper, the authors propose an unsupervised MT evaluation metric using universal part-of-speech tagset without relying on reference translations. The authors also explore the performances of the designed metric on traditional supervised evaluation tasks. Both the supervised and unsupervised experiments show that the designed methods yield higher correlation scores with human judgments.

Install active/passive neutron examination and assay (APNEA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1996-04-01

This document describes activities pertinent to the installation of the prototype Active/Passive Neutron Examination and Assay (APNEA) system built in Area 336 into its specially designed trailer. It also documents the basic theory of operation, design and protective features, basic personnel training, and the proposed characterization site location at Lockheed Martin Specialty Components, Inc., (Specialty Components) with the estimated 10 mrem/year boundary. Additionally, the document includes the Preventive Change Analysis (PCA) form, and a checklist of items for verification prior to unrestricted system use.

The design of a small linear-resonant, split Stirling cryogenic refrigerator compressor

NASA Technical Reports Server (NTRS)

Ackermann, R. A.

1985-01-01

The development of a small linear-resonant compressor for use in a 1/4-watt, 78K, split Stirling cryogenic refrigerator is discussed. The compressor contains the following special features: (1) a permanent-magnet linear motor; (2) resonant dynamics; (3) dynamic balancing; and (4) a close-clearance seal between the compressor piston and cylinder. This paper describes the design of the compressor, and presents component test data and system test data for the compressor driving a 1/4-watt expander.

Design of the Chicago Health and Aging Project (CHAP).

PubMed

Bienias, Julia L; Beckett, Laurel A; Bennett, David A; Wilson, Robert S; Evans, Denis A

2003-10-01

The design of the Chicago Health and Aging Project (CHAP) is described. CHAP is a longitudinal population study of common chronic health problems of older persons, especially of risk factors for incident Alzheimer's disease, in a biracial neighborhood of the south side of Chicago. Special attention is given to three unusual design features of the study. One feature is that clinical evaluation for Alzheimer's disease is confined to a stratified random sample of all participants. This feature results in substantial cost savings and substantially less bias than screening approaches but has the disadvantages of adding analytic complexity and requiring the use of indirect means to identify a disease-free cohort for the development of incident Alzheimer's disease. The second unusual feature is efficiently combining in analyses the successive independent multiple samples that are drawn, one from each data collection cycle. The third unusual feature is entering successive age cohorts of community residents into the study as they attain 65 years of age. This has the advantages of enhancing direct investigation of the effect of age on the action of risk factors for Alzheimer's disease and direct examination of cohort effects. The interaction of these features is described, especially as they pertain to a study in which data are collected in successive waves. The results from these waves must be combined for effective analysis of the relation among risk factors and incident disease.

Advanced Russian Mission Laplace-P to Study the Planetary System of Jupiter: Scientific Goals, Objectives, Special Features and Mission Profile

NASA Astrophysics Data System (ADS)

Martynov, M. B.; Merkulov, P. V.; Lomakin, I. V.; Vyatlev, P. A.; Simonov, A. V.; Leun, E. V.; Barabanov, A. A.; Nasyrov, A. F.

2017-12-01

The advanced Russian project Laplace-P is aimed at developing and launching two scientific spacecraft (SC)— Laplace-P1 ( LP1 SC) and Laplace-P2 ( LP2 SC)—designed for remote and in-situ studies of the system of Jupiter and its moon Ganymede. The LP1 and LP2 spacecraft carry an orbiter and a lander onboard, respectively. One of the orbiter's objectives is to map the surface of Ganymede from the artificial satellite's orbit and to acquire the data for the landing site selection. The main objective of the lander is to carry out in-situ investigations of Ganymede's surface. The paper describes the scientific goals and objectives of the mission, its special features, and the LP1 and LP2 mission profiles during all of the phases—from the launch to the landing on the surface of Ganymede.

PrimerMapper: high throughput primer design and graphical assembly for PCR and SNP detection

PubMed Central

O’Halloran, Damien M.

2016-01-01

Primer design represents a widely employed gambit in diverse molecular applications including PCR, sequencing, and probe hybridization. Variations of PCR, including primer walking, allele-specific PCR, and nested PCR provide specialized validation and detection protocols for molecular analyses that often require screening large numbers of DNA fragments. In these cases, automated sequence retrieval and processing become important features, and furthermore, a graphic that provides the user with a visual guide to the distribution of designed primers across targets is most helpful in quickly ascertaining primer coverage. To this end, I describe here, PrimerMapper, which provides a comprehensive graphical user interface that designs robust primers from any number of inputted sequences while providing the user with both, graphical maps of primer distribution for each inputted sequence, and also a global assembled map of all inputted sequences with designed primers. PrimerMapper also enables the visualization of graphical maps within a browser and allows the user to draw new primers directly onto the webpage. Other features of PrimerMapper include allele-specific design features for SNP genotyping, a remote BLAST window to NCBI databases, and remote sequence retrieval from GenBank and dbSNP. PrimerMapper is hosted at GitHub and freely available without restriction. PMID:26853558

Report of the COSPAR mars special regions colloquium

USGS Publications Warehouse

Kminek, G.; Rummel, J.D.; Cockell, C.S.; Atlas, R.; Barlow, N.; Beaty, D.; Boynton, W.; Carr, M.; Clifford, S.; Conley, C.A.; Davila, A.F.; Debus, A.; Doran, P.; Hecht, M.; Heldmann, J.; Helbert, J.; Hipkin, V.; Horneck, G.; Kieft, Thomas L.; Klingelhoefer, G.; Meyer, M.; Newsom, H.; Ori, G.G.; Parnell, J.; Prieur, D.; Raulin, F.; Schulze-Makuch, D.; Spry, J.A.; Stabekis, P.E.; Stackebrandt, E.; Vago, J.; Viso, M.; Voytek, M.; Wells, L.; Westall, F.

2010-01-01

In this paper we present the findings of a COSPAR Mars Special Regions Colloquium held in Rome in 2007. We review and discuss the definition of Mars Special Regions, the physical parameters used to define Mars Special Regions, and physical features on Mars that can be interpreted as Mars Special Regions. We conclude that any region experiencing temperatures > -25 ??C for a few hours a year and a water activity > 0.5 can potentially allow the replication of terrestrial microorganisms. Physical features on Mars that can be interpreted as meeting these conditions constitute a Mars Special Region. Based on current knowledge of the martian environment and the conservative nature of planetary protection, the following features constitute Mars Special regions: Gullies and bright streaks associated with them, pasted-on terrain, deep subsurface, dark streaks only on a case-by-case basis, others to be determined. The parameter definition and the associated list of physical features should be re-evaluated on a regular basis. ?? 2010 COSPAR. Published by Elsevier Ltd. All rights reserved.

Plastic scintillator detector for pulsed flux measurements

NASA Astrophysics Data System (ADS)

Kadilin, V. V.; Kaplun, A. A.; Taraskin, A. A.

2017-01-01

A neutron detector, providing charged particle detection capability, has been designed. The main purpose of the detector is to measure pulsed fluxes of both charged particles and neutrons during scientific experiments. The detector consists of commonly used neutron-sensitive ZnS(Ag) / 6LiF scintillator screens wrapping a layer of polystyrene based scintillator (BC-454, EJ-254 or equivalent boron loaded plastic). This type of detector design is able to log a spatial distribution of events and may be scaled to any size. Different variations of the design were considered and modelled in specialized toolkits. The article presents a review of the detector design features as well as simulation results.

What's New on MedlinePlus: Announcements and Special Features

MedlinePlus

... this page: https://medlineplus.gov/whatsnew.html What's New on MedlinePlus: Announcements and Special Features To use ... features on this page, please enable JavaScript. "What's New" Page Retirement Thank you for your interest in ...

Indoor navigation by image recognition

NASA Astrophysics Data System (ADS)

Choi, Io Teng; Leong, Chi Chong; Hong, Ka Wo; Pun, Chi-Man

2017-07-01

With the progress of smartphones hardware, it is simple on smartphone using image recognition technique such as face detection. In addition, indoor navigation system development is much slower than outdoor navigation system. Hence, this research proves a usage of image recognition technique for navigation in indoor environment. In this paper, we introduced an indoor navigation application that uses the indoor environment features to locate user's location and a route calculating algorithm to generate an appropriate path for user. The application is implemented on Android smartphone rather than iPhone. Yet, the application design can also be applied on iOS because the design is implemented without using special features only for Android. We found that digital navigation system provides better and clearer location information than paper map. Also, the indoor environment is ideal for Image recognition processing. Hence, the results motivate us to design an indoor navigation system using image recognition.

Calculation of compressible flow in and about three-dimensional inlets with and without auxiliary inlets by a higher-order panel method

NASA Technical Reports Server (NTRS)

Hess, J. L.; Friedman, D. M.

1982-01-01

A three dimensional higher order panel method was specialized to the case of inlets with auxiliary inlets. The resulting program has a number of graphical input-output features to make it highly useful to the designer. The various aspects of the program are described instructions for its use are presented.

76 FR 5061 - Special Conditions: TTF Aerospace, LLC, Modification to Boeing Model 767-300 Series Airplanes...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-28

..., will have a novel or unusual design features associated with the pilot lower lobe crew rest module (CRM...) for installation of a lower lobe pilot crew rest module (CRM) in Boeing Model 767-300 series airplanes. The CRM will be a one-piece, self-contained unit for installation in the forward portion of the aft...

Primary Teachers' Understanding of Four Chemical Phenomena: Effect of an In-Service Training Course

ERIC Educational Resources Information Center

Papageorgiou, George; Stamovlasis, Dimitrios; Johnson, Philip

2013-01-01

One hundred and thirty Greek primary school teachers participated in a study, where the effectiveness of a specially designed intervention on chemical changes was tested. The study took place in the wider context of an in-service training course where the key feature was an innovative approach based on the concept of a substance and its…

The Topic Is Sandy Hook: A Program for Gifted and Talented Students at Sandy Hook.

ERIC Educational Resources Information Center

Grant, David

"The Topic Is Sandy Hook" is an experiential 10-week program designed to provide special opportunities and educational experiences for 6th to 10th grade gifted and talented students. Sandy Hook, a natural resource in Monmouth County, New Jersey, is unique in its physical and historical features and provides an exceptionally rich environment in…

78 FR 49655 - Special Conditions: Embraer, S.A., Model EMB-550 Airplane; Side-Facing Seats; Installation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-15

.... Discussion The FAA has been conducting research to develop an acceptable method of compliance with Title 14...;to and codified in the Code of Federal Regulations, which is published #0;under 50 titles pursuant to....A. Model EMB-550 airplane. This airplane will have a novel or unusual design feature associated with...

Primary Teachers' Particle Ideas and Explanations of Physical Phenomena: Effect of an In-Service Training Course

ERIC Educational Resources Information Center

Papageorgiou, George; Stamovlasis, Dimitrios; Johnson, Phil Michael

2010-01-01

This paper presents a study concerning Greek primary school teachers' (n = 162) ideas about the particulate nature of matter and their explanations of physical phenomena. The study took place during an in-service training course where the effectiveness of a specially designed intervention was tested. A key feature was an approach based on the…

USSR Report, Kommunist, No. 13, September 1986.

DTIC Science & Technology

1987-01-07

all-union) program for specialization of NPO and industrial enterprises and their scientific research institutes and design bureaus could play a major...machine tools with numerical programming (ChPU), processing centers, automatic machines and groups of automatic machines controlled by computers, and...automatic lines, computer- controlled groups of equipment, comprehensively automated shops and sections) is the most important feature of high technical

State Special Education Criteria for Identifying Intellectual Disability: A Review Following Revised Diagnostic Criteria and Rosa's Law

ERIC Educational Resources Information Center

McNicholas, Patrick J.; Floyd, Randy G.; Woods, Isaac L.; Singh, Leah J.; Manguno, Meredith S.; Maki, Kathrin E.

2018-01-01

Across the last century, the condition known as "intellectual disability" (ID) has been labeled by assorted terms, its key features have varied, and recommendations for its identification have been divided. In light of recent changes to the diagnostic criteria for ID and to federal legislation, this study was designed to compile and…

A phosphorescent rhenium(I) histone deacetylase inhibitor: mitochondrial targeting and paraptosis induction.

PubMed

Ye, Rui-Rong; Tan, Cai-Ping; Lin, Yan-Nan; Ji, Liang-Nian; Mao, Zong-Wan

2015-05-14

In this report, we designed a histone deacetylase-targeted phosphorescent Re(I) complex ReLMito. Colocalization studies suggested that ReLMito could specially localize to mitochondria. We also demonstrated that ReLMito could induce paraptosis in cancer cells. These features endowed the complex with potential to induce and monitor mitochondrial morphological changes during the paraptosis simultaneously.

How time delay and network design shape response patterns in biochemical negative feedback systems.

PubMed

Börsch, Anastasiya; Schaber, Jörg

2016-08-24

Negative feedback in combination with time delay can bring about both sustained oscillations and adaptive behaviour in cellular networks. Here, we study which design features of systems with delayed negative feedback shape characteristic response patterns with special emphasis on the role of time delay. To this end, we analyse generic two-dimensional delay differential equations describing the dynamics of biochemical signal-response networks. We investigate the influence of several design features on the stability of the model equilibrium, i.e., presence of auto-inhibition and/or mass conservation and the kind and/or strength of the delayed negative feedback. We show that auto-inhibition and mass conservation have a stabilizing effect, whereas increasing abruptness and decreasing feedback threshold have a de-stabilizing effect on the model equilibrium. Moreover, applying our theoretical analysis to the mammalian p53 system we show that an auto-inhibitory feedback can decouple period and amplitude of an oscillatory response, whereas the delayed feedback can not. Our theoretical framework provides insight into how time delay and design features of biochemical networks act together to elicit specific characteristic response patterns. Such insight is useful for constructing synthetic networks and controlling their behaviour in response to external stimulation.

Robust recognition of degraded machine-printed characters using complementary similarity measure and error-correction learning

NASA Astrophysics Data System (ADS)

Hagita, Norihiro; Sawaki, Minako

1995-03-01

Most conventional methods in character recognition extract geometrical features such as stroke direction, connectivity of strokes, etc., and compare them with reference patterns in a stored dictionary. Unfortunately, geometrical features are easily degraded by blurs, stains and the graphical background designs used in Japanese newspaper headlines. This noise must be removed before recognition commences, but no preprocessing method is completely accurate. This paper proposes a method for recognizing degraded characters and characters printed on graphical background designs. This method is based on the binary image feature method and uses binary images as features. A new similarity measure, called the complementary similarity measure, is used as a discriminant function. It compares the similarity and dissimilarity of binary patterns with reference dictionary patterns. Experiments are conducted using the standard character database ETL-2 which consists of machine-printed Kanji, Hiragana, Katakana, alphanumeric, an special characters. The results show that this method is much more robust against noise than the conventional geometrical feature method. It also achieves high recognition rates of over 92% for characters with textured foregrounds, over 98% for characters with textured backgrounds, over 98% for outline fonts, and over 99% for reverse contrast characters.

Video image processing

NASA Technical Reports Server (NTRS)

Murray, N. D.

1985-01-01

Current technology projections indicate a lack of availability of special purpose computing for Space Station applications. Potential functions for video image special purpose processing are being investigated, such as smoothing, enhancement, restoration and filtering, data compression, feature extraction, object detection and identification, pixel interpolation/extrapolation, spectral estimation and factorization, and vision synthesis. Also, architectural approaches are being identified and a conceptual design generated. Computationally simple algorithms will be research and their image/vision effectiveness determined. Suitable algorithms will be implimented into an overall architectural approach that will provide image/vision processing at video rates that are flexible, selectable, and programmable. Information is given in the form of charts, diagrams and outlines.

Loving Nature From the Inside Out: A Biophilia Matrix Identification Strategy for Designers.

PubMed

McGee, Beth; Marshall-Baker, Anna

2015-01-01

The development of the Biophilic Design Matrix (BDM) was to aid designers or other specialists in identifying and quantifying biophilic features through a visual inventory of interior spaces. With mounting evidence to support the healing attributes of biophilic environments, we propose a method to identify biophilic content within interior spaces. Such a strategy offers much promise to the advancement of restorative environments. The BDM was based on Stephen Kellert's biophilic design attribute list and modified to be appropriate for interior environments, specifically children's healthcare spaces. A photo-ethnographic documentation method of 24 child life play spaces within a South Atlantic state was used to determine whether the BDM could reliably reveal biophilic features (listed as attributes by Kellert in 2008). This matrix appears useful in documenting biophilia within the pediatric healthcare context, attesting to the usability and functionality of the BDM for this special population. Specifically, the BDM revealed that biophilic attributes were constantly present in some spaces while others were completely absent. When a biophilic attribute was present, the BDM indicated that they varied considerably in type and occurrence. Thus, use of the BDM in the hospital areas designed for patient recreation and play successfully provided a visual inventory of biophilic features as well as the frequency of application. Further use of the BDM as a tool for strategizing biophilic feature inclusion can thus increase the connections available with nature in the interior, beneficial for optimizing health and wellness. © The Author(s) 2015.

Design of a real-time wind turbine simulator using a custom parallel architecture

NASA Technical Reports Server (NTRS)

Hoffman, John A.; Gluck, R.; Sridhar, S.

1995-01-01

The design of a new parallel-processing digital simulator is described. The new simulator has been developed specifically for analysis of wind energy systems in real time. The new processor has been named: the Wind Energy System Time-domain simulator, version 3 (WEST-3). Like previous WEST versions, WEST-3 performs many computations in parallel. The modules in WEST-3 are pure digital processors, however. These digital processors can be programmed individually and operated in concert to achieve real-time simulation of wind turbine systems. Because of this programmability, WEST-3 is very much more flexible and general than its two predecessors. The design features of WEST-3 are described to show how the system produces high-speed solutions of nonlinear time-domain equations. WEST-3 has two very fast Computational Units (CU's) that use minicomputer technology plus special architectural features that make them many times faster than a microcomputer. These CU's are needed to perform the complex computations associated with the wind turbine rotor system in real time. The parallel architecture of the CU causes several tasks to be done in each cycle, including an IO operation and the combination of a multiply, add, and store. The WEST-3 simulator can be expanded at any time for additional computational power. This is possible because the CU's interfaced to each other and to other portions of the simulation using special serial buses. These buses can be 'patched' together in essentially any configuration (in a manner very similar to the programming methods used in analog computation) to balance the input/ output requirements. CU's can be added in any number to share a given computational load. This flexible bus feature is very different from many other parallel processors which usually have a throughput limit because of rigid bus architecture.

Heat Treatment of Tools in Light Industry

NASA Astrophysics Data System (ADS)

Petukhov, V. A.

2005-09-01

Heat treatment processes for some tools (knitting needles, travelers for thimbles of spinning and doubling frames, thread-forming spinnerets) used for the production of cloths, hosiery, and other articles) in the knitting and textile industries are considered. Problems of the choice of steel and the kind and parameters of heat treatment are discussed in connection with the special features of tool design and operating conditions.

76 FR 35736 - Special Conditions: Gulfstream Aerospace LP (GALP) Model G250 Airplane Automatic Power Reserve...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-20

... novel or unusual design feature associated with go-around performance credit for use of Automatic Power... docket in person, go to the address in the ADDRESSES section of this preamble between 7:30 a.m. and 4 p.m... proposing to use the APR function of the Model G250 airplane during go-around and is requesting approach...

Findings from the PISA for Development Field Trial of the School-Based Assessment. PISA for Development Brief 16

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

The PISA for Development (PISA-D) project aims to make PISA more accessible and relevant to middle- and low-income countries by introducing new features to the assessment, including tests that are specially designed to measure lower levels of performance, contextual questionnaires that better reflect the situations of 15-year-olds across a diverse…

Systems engineering and integration: Advanced avionics laboratories

NASA Technical Reports Server (NTRS)

1990-01-01

In order to develop the new generation of avionics which will be necessary for upcoming programs such as the Lunar/Mars Initiative, Advanced Launch System, and the National Aerospace Plane, new Advanced Avionics Laboratories are required. To minimize costs and maximize benefits, these laboratories should be capable of supporting multiple avionics development efforts at a single location, and should be of a common design to support and encourage data sharing. Recent technological advances provide the capability of letting the designer or analyst perform simulations and testing in an environment similar to his engineering environment and these features should be incorporated into the new laboratories. Existing and emerging hardware and software standards must be incorporated wherever possible to provide additional cost savings and compatibility. Special care must be taken to design the laboratories such that real-time hardware-in-the-loop performance is not sacrificed in the pursuit of these goals. A special program-independent funding source should be identified for the development of Advanced Avionics Laboratories as resources supporting a wide range of upcoming NASA programs.

Biosynthesis of Inorganic Nanoparticles: A Fresh Look at the Control of Shape, Size and Composition

PubMed Central

Dahoumane, Si Amar; Jeffryes, Clayton; Mechouet, Mourad; Agathos, Spiros N.

2017-01-01

Several methodologies have been devised for the design of nanomaterials. The “Holy Grail” for materials scientists is the cost-effective, eco-friendly synthesis of nanomaterials with controlled sizes, shapes and compositions, as these features confer to the as-produced nanocrystals unique properties making them appropriate candidates for valuable bio-applications. The present review summarizes published data regarding the production of nanomaterials with special features via sustainable methodologies based on the utilization of natural bioresources. The richness of the latter, the diversity of the routes adopted and the tuned experimental parameters have led to the fabrication of nanomaterials belonging to different chemical families with appropriate compositions and displaying interesting sizes and shapes. It is expected that these outstanding findings will encourage researchers and attract newcomers to continue and extend the exploration of possibilities offered by nature and the design of innovative and safer methodologies towards the synthesis of unique nanomaterials, possessing desired features and exhibiting valuable properties that can be exploited in a profusion of fields. PMID:28952493

Making the most of sparse clinical data by using a predictive-model-based analysis, illustrated with a stavudine pharmacokinetic study.

PubMed

Zhang, L; Price, R; Aweeka, F; Bellibas, S E; Sheiner, L B

2001-02-01

A small-scale clinical investigation was done to quantify the penetration of stavudine (D4T) into cerebrospinal fluid (CSF). A model-based analysis estimates the steady-state ratio of AUCs of CSF and plasma concentrations (R(AUC)) to be 0.270, and the mean residence time of drug in the CSF to be 7.04 h. The analysis illustrates the advantages of a causal (scientific, predictive) model-based approach to analysis over a noncausal (empirical, descriptive) approach when the data, as here, demonstrate certain problematic features commonly encountered in clinical data, namely (i) few subjects, (ii) sparse sampling, (iii) repeated measures, (iv) imbalance, and (v) individual design variation. These features generally require special attention in data analysis. The causal-model-based analysis deals with features (i) and (ii), both of which reduce efficiency, by combining data from different studies and adding subject-matter prior information. It deals with features (iii)--(v), all of which prevent 'averaging' individual data points directly, first, by adjusting in the model for interindividual data differences due to design differences, secondly, by explicitly differentiating between interpatient, interoccasion, and measurement error variation, and lastly, by defining a scientifically meaningful estimand (R(AUC)) that is independent of design.

Hardware description languages

NASA Technical Reports Server (NTRS)

Tucker, Jerry H.

1994-01-01

Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

[Designing a software for drug management in special situations at a hospital's drug administration service].

PubMed

Sánchez Cuervo, Marina; Muñoz García, María; Gómez de Salazar López de Silanes, María Esther; Bermejo Vicedo, Teresa

2015-03-01

to describe the features of a computer program for management of drugs in special situations (off-label and compassionate use) in a Department of Hospital Pharmacy (PD). To describe the methodology followed for its implementation in the Medical Services. To evaluate their use after 2 years of practice. the design was carried out by pharmacists of the PD. The stages of the process were: selection of a software development company, establishment of a working group, selection of a development platform, design of an interactive Viewer, definition of functionality and data processing, creation of databases, connection, installation and configuration, application testing and improvements development. A directed sequential strategy was used for implementation in the Medical Services. The program's utility and experience of use were evaluated after 2 years. a multidisciplinary working group was formed and developed Pk_Usos®. The program works in web environment with a common viewer for all users enabling real time checking of the request files' status and that adapts to the management of medications in special situations procedure. Pk_Usos® was introduced first in the Oncology Department, with 15 oncologists as users of the program. 343 patients had 384 treatment requests managed, of which 363 are authorized throughout two years. PK_Usos® is the first software designed for the management of drugs in special situations in the PD. It is a dynamic and efficient tool for all professionals involved in the process by optimization of times. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Designing a process for executing projects under an international agreement

NASA Technical Reports Server (NTRS)

Mohan, S. N.

2003-01-01

Projects executed under an international agreement require special arrangements in order to operate within confines of regulations issued by the State Department and the Commerce Department. In order to communicate enterprise-level guidance and procedural information uniformly to projects based on interpretations that carry the weight of institutional authority, a process was developed. This paper provides a script for designing processes in general, using this particular process for context. While the context is incidental, the method described is applicable to any process in general. The paper will expound on novel features utilized for dissemination of the procedural details over the Internet following such process design.

PREFACE: Special section featuring selected papers from the 3rd International Workshop on Numerical Modelling of High Temperature Superconductors Special section featuring selected papers from the 3rd International Workshop on Numerical Modelling of High Temperature Superconductors

NASA Astrophysics Data System (ADS)

Granados, Xavier; Sánchez, Àlvar; López-López, Josep

2012-10-01

The development of superconducting applications and superconducting engineering requires the support of consistent tools which can provide models for obtaining a good understanding of the behaviour of the systems and predict novel features. These models aim to compute the behaviour of the superconducting systems, design superconducting devices and systems, and understand and test the behavior of the superconducting parts. 50 years ago, in 1962, Charles Bean provided the superconducting community with a model efficient enough to allow the computation of the response of a superconductor to external magnetic fields and currents flowing through in an understandable way: the so called critical-state model. Since then, in addition to the pioneering critical-state approach, other tools have been devised for designing operative superconducting systems, allowing integration of the superconducting design in nearly standard electromagnetic computer-aided design systems by modelling the superconducting parts with consideration of time-dependent processes. In April 2012, Barcelona hosted the 3rd International Workshop on Numerical Modelling of High Temperature Superconductors (HTS), the third in a series of workshops started in Lausanne in 2010 and followed by Cambridge in 2011. The workshop reflected the state-of-the-art and the new initiatives of HTS modelling, considering mathematical, physical and technological aspects within a wide and interdisciplinary scope. Superconductor Science and Technology is now publishing a selection of papers from the workshop which have been selected for their high quality. The selection comprises seven papers covering mathematical, physical and technological topics which contribute to an improvement in the development of procedures, understanding of phenomena and development of applications. We hope that they provide a perspective on the relevance and growth that the modelling of HTS superconductors has achieved in the past 25 years.

A telescopic jib for continuous adjustment

NASA Technical Reports Server (NTRS)

Etzler, C. C.

1979-01-01

For special space applications, e.g. for experiments distant from any orbital platforms or manipulators a new kind of jibs with extreme extension capacity has to be designed. Considering the requirements, the telescopic principle is found to be the most promising. For the choice of the stiff structure, design criteria are evaluated. Special effort deals with the drive system. An electromechanical system can satisfy the requirements. First results of the development of such a drive are presented. The most significant features are: A telescopic assembly of tubes which can be mutually moved by a short spindle in the center of the package. An elastically suspended screw is located at the bottom of each tube. For the jib extension, these screws will be linked with the spindle. The control of their sequence and the adjustment of tubes in mutual end positions are performed by latches. A functional model proved the basic idea.

VLSI processors for signal detection in SETI

NASA Technical Reports Server (NTRS)

Duluk, J. F.; Linscott, I. R.; Peterson, A. M.; Burr, J.; Ekroot, B.; Twicken, J.

1989-01-01

The objective of the Search for Extraterrestrial Intelligence (SETI) is to locate an artificially created signal coming from a distant star. This is done in two steps: (1) spectral analysis of an incoming radio frequency band, and (2) pattern detection for narrow-band signals. Both steps are computationally expensive and require the development of specially designed computer architectures. To reduce the size and cost of the SETI signal detection machine, two custom VLSI chips are under development. The first chip, the SETI DSP Engine, is used in the spectrum analyzer and is specially designed to compute Discrete Fourier Transforms (DFTs). It is a high-speed arithmetic processor that has two adders, one multiplier-accumulator, and three four-port memories. The second chip is a new type of Content-Addressable Memory. It is the heart of an associative processor that is used for pattern detection. Both chips incorporate many innovative circuits and architectural features.

VLSI processors for signal detection in SETI.

PubMed

Duluk, J F; Linscott, I R; Peterson, A M; Burr, J; Ekroot, B; Twicken, J

1989-01-01

The objective of the Search for Extraterrestrial Intelligence (SETI) is to locate an artificially created signal coming from a distant star. This is done in two steps: (1) spectral analysis of an incoming radio frequency band, and (2) pattern detection for narrow-band signals. Both steps are computationally expensive and require the development of specially designed computer architectures. To reduce the size and cost of the SETI signal detection machine, two custom VLSI chips are under development. The first chip, the SETI DSP Engine, is used in the spectrum analyzer and is specially designed to compute Discrete Fourier Transforms (DFTs). It is a high-speed arithmetic processor that has two adders, one multiplier-accumulator, and three four-port memories. The second chip is a new type of Content-Addressable Memory. It is the heart of an associative processor that is used for pattern detection. Both chips incorporate many innovative circuits and architectural features.

A Probe into Key Points in the Planning and Design of Integrated Corridor at Large Civil Airports

NASA Astrophysics Data System (ADS)

Zhao, Qing

2018-05-01

If we compare an airport to our human body, all sorts of specialized pipelines and wires are to an airport as the vascular system and nervous system etc. to the human body, where each functional zone connecting the airport serves each major system of airport and provides “throughput like the function of driving out the processed for the new” and “central control and transmission function”. Guided by the master plan and the concept of progressive development of airports, it is critical to map out a plan to link near-term and long-term development of supporting utilities. The role and effect of integrated corridor is of significance to the construction of multi-runway large-sized new airports or to the expansion of an airport costing tens of billions. In view of the features of the fast growing civil aviation sector in China, this thesis argues for the necessity to plan for and build integrated corridor at large airports, suggests doing research on integrated corridor at the project consulting stage by drawing upon available airport design experiences and case studies and combining the plan for public utilities (or special plan), and analyzes and outlines key points in integrated corridor design based on special requirements and industrial standards for civil airport management.

Aptaligner: automated software for aligning pseudorandom DNA X-aptamers from next-generation sequencing data.

PubMed

Lu, Emily; Elizondo-Riojas, Miguel-Angel; Chang, Jeffrey T; Volk, David E

2014-06-10

Next-generation sequencing results from bead-based aptamer libraries have demonstrated that traditional DNA/RNA alignment software is insufficient. This is particularly true for X-aptamers containing specialty bases (W, X, Y, Z, ...) that are identified by special encoding. Thus, we sought an automated program that uses the inherent design scheme of bead-based X-aptamers to create a hypothetical reference library and Markov modeling techniques to provide improved alignments. Aptaligner provides this feature as well as length error and noise level cutoff features, is parallelized to run on multiple central processing units (cores), and sorts sequences from a single chip into projects and subprojects.

Features in grocery stores that motivate shoppers to buy healthier foods, ConsumerStyles 2014

PubMed Central

Moore, Latetia V; Pinard, Courtney A.; Yaroch, Amy L.

2016-01-01

Objective We examined nine features in grocery stores shoppers reported motivated them to purchase more healthful foods in the past month. Design Features were compiled from common supermarket practices for each of the 4 Ps of marketing: pricing, placement, promotion, and product. We examined percentages of the features overall and by shopping frequency using chi-square tests from a 2014 cross sectional web-based health attitudes and behaviors survey, ConsumerStyles. The survey was fielded from June to July in 2014. Setting Participants were part of a market research consumer panel that were randomly recruited by probability-based sampling using address-based sampling methods to achieve a sample representative of the U.S. population. Subjects Data from 4,242 adults ages 18 and older were analyzed. Results About 44% of respondents indicated at least one feature motivated them to purchase more healthful foods. Top choices included in-store coupons or specials (20.1%), availability of convenient, ready-to-eat more healthful foods (18.8%), product labels or advertising on packages (15.2%), and labels or signs on shelves that highlighted more healthful options (14.6%). Frequent shoppers reported being motivated to purchase more healthful foods by in-store tastings/recipe demonstrations and coupons/specials more often than infrequent shoppers. Conclusions Enhancing the visibility and appeal of more healthful food items in grocery stores may help improve dietary choices in some populations but additional research is needed to identify the most effective strategies for interventions. PMID:26831484

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Richen; Guo, Hanqi; Yuan, Xiaoru

Most of the existing approaches to visualize vector field ensembles are to reveal the uncertainty of individual variables, for example, statistics, variability, etc. However, a user-defined derived feature like vortex or air mass is also quite significant, since they make more sense to domain scientists. In this paper, we present a new framework to extract user-defined derived features from different simulation runs. Specially, we use a detail-to-overview searching scheme to help extract vortex with a user-defined shape. We further compute the geometry information including the size, the geo-spatial location of the extracted vortexes. We also design some linked views tomore » compare them between different runs. At last, the temporal information such as the occurrence time of the feature is further estimated and compared. Results show that our method is capable of extracting the features across different runs and comparing them spatially and temporally.« less

The rationale and design features for the 40 by 80/80 by 120 foot wind tunnel

NASA Technical Reports Server (NTRS)

Mort, K. W.; Kelly, M. W.; Hickey, D. H.

1976-01-01

A substantial increase in the test capability of full scale wind tunnels is considered. In order to determine the most cost effective means for providing this desired increase in test capability, a series of design studies were conducted of various new facilities as well as of major modifications to the existing 40- by 80-foot wind tunnel. The most effective trade between test capability and facility cost was provided by repowering the existing 40 by 80 foot wind tunnel to increase the maximum speed from 200 knots to 300 knots and by the addition of a new 80- by 120-foot test section having a 110 knot maximum speed. The design of the facility is described with special emphasis on the unique features, such as the drive system which absorbs nearly four times the power without an increase in noise, and the large flow diversion devices required to interface the two test sections to a single drive.

The Design of a Templated C++ Small Vector Class for Numerical Computing

NASA Technical Reports Server (NTRS)

Moran, Patrick J.

2000-01-01

We describe the design and implementation of a templated C++ class for vectors. The vector class is templated both for vector length and vector component type; the vector length is fixed at template instantiation time. The vector implementation is such that for a vector of N components of type T, the total number of bytes required by the vector is equal to N * size of (T), where size of is the built-in C operator. The property of having a size no bigger than that required by the components themselves is key in many numerical computing applications, where one may allocate very large arrays of small, fixed-length vectors. In addition to the design trade-offs motivating our fixed-length vector design choice, we review some of the C++ template features essential to an efficient, succinct implementation. In particular, we highlight some of the standard C++ features, such as partial template specialization, that are not supported by all compilers currently. This report provides an inventory listing the relevant support currently provided by some key compilers, as well as test code one can use to verify compiler capabilities.

The use of hybrid integrated circuit techniques in biotelemetry applications

NASA Technical Reports Server (NTRS)

Fryer, T. B.

1977-01-01

A review is presented of some features of hybrid integrated circuits that make their use advantageous in miniature biotelemetry applications. The various techniques for fabricating resistors, capacitors and interconnections by both thin film and thick film technology are discussed. The use of chip capacitors, resistors, and especially standard IC chips on substrates with fired-on interconnection patterns is emphasized. The review is designed primarily to acquaint biotelemetry users and designers with an overview of this fabrication technique so that they can better communicate their needs with an understanding of its limitations and advantages to facilities specializing in hybrid construction.

Pilot-optimal augmentation synthesis

NASA Technical Reports Server (NTRS)

Schmidt, D. K.

1978-01-01

An augmentation synthesis method usable in the absence of quantitative handling qualities specifications, and yet explicitly including design objectives based on pilot-rating concepts, is presented. The algorithm involves the unique approach of simultaneously solving for the stability augmentation system (SAS) gains, pilot equalization and pilot rating prediction via optimal control techniques. Simultaneous solution is required in this case since the pilot model (gains, etc.) depends upon the augmented plant dynamics, and the augmentation is obviously not a priori known. Another special feature is the use of the pilot's objective function (from which the pilot model evolves) to design the SAS.

Features of the Information and Communication Technology Application by the Subjects of Special Education

ERIC Educational Resources Information Center

Arhipova, Svetlana Vladimirovna; Sergeeva, Olesya Sergeevna

2015-01-01

The main purpose of this study is to reveal the features of information and communication technologies application by the subjects of education in the conditions of special (correctional) school type VIII, and to identify the level of computer literacy of special education. The study was conducted on the basis of the State Budgetary Special…

Turbine Design and Analysis for the J-2X Engine Turbopumps

NASA Technical Reports Server (NTRS)

Marcu, Bogdan; Tran, Ken; Dorney, Daniel J.; Schmauch, Preston

2008-01-01

Pratt and Whitney Rocketdyne and NASA Marshall Space Flight Center are developing the advanced upper stage J-2X engine based on the legacy design of the J-2/J-2S family of engines which powered the Apollo missions. The cryogenic propellant turbopumps have been denoted as Mark72-F and Mark72-0 for the fuel and oxidizer side, respectively. Special attention is focused on preserving the essential flight-proven design features while adapting the design to the new turbopump configuration. Advanced 3-D CFD analysis has been employed to verify turbine aero performance at current flow regime boundary conditions and to mitigate risks associated with stresses. A limited amount of redesign and overall configuration modifications allow for a robust design with performance level matching or exceeding requirement.

Timing characterization and analysis of the Linux-based, closed loop control computer for the Subaru Telescope laser guide star adaptive optics system

NASA Astrophysics Data System (ADS)

Dinkins, Matthew; Colley, Stephen

2008-07-01

Hardware and software specialized for real time control reduce the timing jitter of executables when compared to off-the-shelf hardware and software. However, these specialized environments are costly in both money and development time. While conventional systems have a cost advantage, the jitter in these systems is much larger and potentially problematic. This study analyzes the timing characterstics of a standard Dell server running a fully featured Linux operating system to determine if such a system would be capable of meeting the timing requirements for closed loop operations. Investigations are preformed on the effectiveness of tools designed to make off-the-shelf system performance closer to specialized real time systems. The Gnu Compiler Collection (gcc) is compared to the Intel C Compiler (icc), compiler optimizations are investigated, and real-time extensions to Linux are evaluated.

Study on Stationarity of Random Load Spectrum Based on the Special Road

NASA Astrophysics Data System (ADS)

Yan, Huawen; Zhang, Weigong; Wang, Dong

2017-09-01

In the special road quality assessment method, there is a method using a wheel force sensor, the essence of this method is collecting the load spectrum of the car to reflect the quality of road. According to the definition of stochastic process, it is easy to find that the load spectrum is a stochastic process. However, the analysis method and application range of different random processes are very different, especially in engineering practice, which will directly affect the design and development of the experiment. Therefore, determining the type of a random process has important practical significance. Based on the analysis of the digital characteristics of road load spectrum, this paper determines that the road load spectrum in this experiment belongs to a stationary stochastic process, paving the way for the follow-up modeling and feature extraction of the special road.

A temperature-controlled cell for X-ray study of liquid systems using a commercial DRON-UM1 diffractometer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petrun`kin, S.P.; Garavina, E.V.; Trostin, V.N.

1995-02-01

A container (cell) and a temperature-control system have been designed enabling one to carry out x-ray diffraction study of liquid samples both at a fixed temperature and within a certain temperature range using a commercial DRON-UMl x-ray diffractometer. Special features of the cell and the materials used for it allow one to study both chemically inert and corrosive liquids.

On biodiversity conservation and poverty traps.

PubMed

Barrett, Christopher B; Travis, Alexander J; Dasgupta, Partha

2011-08-23

This paper introduces a special feature on biodiversity conservation and poverty traps. We define and explain the core concepts and then identify four distinct classes of mechanisms that define important interlinkages between biodiversity and poverty. The multiplicity of candidate mechanisms underscores a major challenge in designing policy appropriate across settings. This framework is then used to introduce the ensuing set of papers, which empirically explore these various mechanisms linking poverty traps and biodiversity conservation.

On biodiversity conservation and poverty traps

PubMed Central

Barrett, Christopher B.; Travis, Alexander J.; Dasgupta, Partha

2011-01-01

This paper introduces a special feature on biodiversity conservation and poverty traps. We define and explain the core concepts and then identify four distinct classes of mechanisms that define important interlinkages between biodiversity and poverty. The multiplicity of candidate mechanisms underscores a major challenge in designing policy appropriate across settings. This framework is then used to introduce the ensuing set of papers, which empirically explore these various mechanisms linking poverty traps and biodiversity conservation. PMID:21873176

The Science and Art of Eyebrow Transplantation by Follicular Unit Extraction

PubMed Central

Gupta, Jyoti; Kumar, Amrendra; Chouhan, Kavish; Ariganesh, C; Nandal, Vinay

2017-01-01

Eyebrows constitute a very important and prominent feature of the face. With growing information, eyebrow transplant has become a popular procedure. However, though it is a small area it requires a lot of precision and knowledge regarding anatomy, designing of brows, extraction and implantation technique. This article gives a comprehensive view regarding eyebrow transplant with special emphasis on follicular unit extraction technique, which has become the most popular technique. PMID:28852290

Photovoltaic power for Space Station Freedom

NASA Technical Reports Server (NTRS)

Baraona, Cosmo R.

1990-01-01

Space Station Freedom is described with special attention given to its electric power system. The photovoltaic arrays, the battery energy storage system, and the power management, and distribution system are also discussed. The current design of Freedom's power system and the system requirements, trade studies, and competing factors which lead to system selections are referenced. This will be the largest power system ever flown in space. This system represents the culmination of many developments that have improved system performance, reduced cost, and improved reliability. Key developments and their evolution into the current space station solar array design are briefly described. The features of the solar cell and the array including the development, design, test, and flight hardware production status are given.

Photovoltaic power for Space Station Freedom

NASA Technical Reports Server (NTRS)

Baraona, Cosmo R.

1990-01-01

Space Station Freedom is described with special attention to its electric power system. The photovoltaic arrays, the battery energy storage system, and the power management and distribution system are also discussed. The current design of Freedom's power system and the system requirements, trade studies, and competing factors which lead to system selections are referenced. This will be the largest power system ever flown in space. This system represents the culmination of many developments that have improved system performance, reduced cost, and improved reliability. Key developments and their evolution into the current space station solar array design are briefly described. The features of the solar cell and the array including the development, design, test, and flight hardware production status are given.

Design criteria of the bolometer diagnostic for steady-state operation of the W7-X stellaratora)

NASA Astrophysics Data System (ADS)

Zhang, D.; Burhenn, R.; Koenig, R.; Giannone, L.; Grodzki, P. A.; Klein, B.; Grosser, K.; Baldzuhn, J.; Ewert, K.; Erckmann, V.; Hirsch, M.; Laqua, H. P.; Oosterbeek, J. W.

2010-10-01

A bolometric diagnostic system with features necessary for steady-state operation in the superconducting stellarator W7-X was designed. During a pulse length of 1800 s with an ECRH (electron cyclotron resonance heating) power of 10 MW, the components suffer not only from a large thermal load but also from stray radiation of the nonabsorbed isotropic microwaves. This paper gives an overview of the technical problems encountered during the design work and the solutions to individual problems to meet the special requirements in W7-X, e.g., component thermal protection, detector offset thermal drift suppression, as well as a microwave shielding technique.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldsmith, Steven Y.; Spires, Shannon V.

There are currently two proposed standards for agent communication languages, namely, KQML (Finin, Lobrou, and Mayfield 1994) and the FIPA ACL. Neither standard has yet achieved primacy, and neither has been evaluated extensively in an open environment such as the Internet. It seems prudent therefore to design a general-purpose agent communications facility for new agent architectures that is flexible yet provides an architecture that accepts many different specializations. In this paper we exhibit the salient features of an agent communications architecture based on distributed metaobjects. This architecture captures design commitments at a metaobject level, leaving the base-level design and implementationmore » up to the agent developer. The scope of the metamodel is broad enough to accommodate many different communication protocols, interaction protocols, and knowledge sharing regimes through extensions to the metaobject framework. We conclude that with a powerful distributed object substrate that supports metaobject communications, a general framework can be developed that will effectively enable different approaches to agent communications in the same agent system. We have implemented a KQML-based communications protocol and have several special-purpose interaction protocols under development.« less

Assessment of safety-relevant aspects of Kraftwerk Union's 200-MW(thermal) nuclear district heating plant concept

DOE Office of Scientific and Technical Information (OSTI.GOV)

Erlenwein, P.; Frisch, W.; Kafka, P.

Nuclear reactors of 200- to 400-MW(thermal) power for district heating are the subject of increasing interest, and several specific designs are under discussion today. In the Federal Republic of Germany (FRG), the Kraftwerk Union AG has presented a 200-MW(thermal) heating reactor concept. The main safety issues of this design are assessed. In this design, the primary system is fully integrated into the reactor pressure vessel (RPV), which is tightly enclosed by the containment. The low process parameters like pressure, temperature, and power density and the high ratio of coolant volume to thermal power allow the design of simple safety features.more » This is supported by the preference of passive over active components. A special feature is a newly designed hydraulic control and rod drive mechanism, which is also integrated into the RPV. Within the safety assessment an overview of the relevant FRG safety rules and guidelines, developed mainly for large, electricity-generating power plants, is given. Included is a discussion of the extent to which these licensing rules can be applied to the concept of heating reactors.« less

The promise of a specially-designed graft copolymer of acrylic acid onto cellulose as selective sorbent for heavy metal ions.

PubMed

Essawy, Hisham A; Mohamed, Magdy F; Ammar, Nabila S; Ibrahim, Hanan S

2017-10-01

A specially-designed graft copolymer of acrylic acid onto in-situ formed cellulose-fulvate hybrid showed privileged tendency for uptake of Pb(II) during competitive removal from a mixture containing Cd(II) and Ni(II) within 5min at pH 5. This novel trend is attributed mainly to the crowded high content of coordinating centers within the designed graft copolymer along with the acquired superabsorbency. This provides an outstanding tool to separate some metal ions selectively from mixtures containing multiple ions on kinetic basis. Thus, the designed graft copolymer structure exhibited superior efficiency that reached ∼95% for sole removal of Pb(II). Kinetic modeling for Pb(II) individual removal showed excellent fitting with a pseudo second-order model. Intraparticle diffusion model on the other hand ensured governance of boundary layer effect over diffusion during the removal process due to the superabsorbency feature of the graft copolymer. The experimental findings were described with models such as Freundlich, Langmuir, and Dubinin-Radushkevich. The Langmuir and Freundlich models showed convenience with the adsorption isotherm of Pb(II) onto the developed graft copolymer. Copyright © 2017 Elsevier B.V. All rights reserved.

EDITORIAL: Measurement techniques for multiphase flows Measurement techniques for multiphase flows

NASA Astrophysics Data System (ADS)

Okamoto, Koji; Murai, Yuichi

2009-11-01

Research on multiphase flows is very important for industrial applications, including power stations, vehicles, engines, food processing and so on. Multiphase flows originally have nonlinear features because of multiphase systems. The interaction between the phases plays a very interesting role in the flows. The nonlinear interaction causes the multiphase flows to be very complicated. Therefore techniques for measuring multiphase flows are very useful in helping to understand the nonlinear phenomena. The state-of-the-art measurement techniques were presented and discussed at the sixth International Symposium on Measurement Techniques for Multiphase Flows (ISMTMF2008) held in Okinawa, Japan, on 15-17 December 2008. This special feature of Measurement Science and Technology includes selected papers from ISMTMF2008. Okinawa has a long history as the Ryukyus Kingdom. China, Japan and many western Pacific countries have had cultural and economic exchanges through Okinawa for over 1000 years. Much technical and scientific information was exchanged at the symposium in Okinawa. The proceedings of ISMTMF2008 apart from these special featured papers were published in Journal of Physics: Conference Series vol. 147 (2009). We would like to express special thanks to all the contributors to the symposium and this special feature. This special feature will be a milestone in measurement techniques for multiphase flows.

Impact of the design of neonatal intensive care units on neonates, staff, and families: a systematic literature review.

PubMed

Shahheidari, Marzieh; Homer, Caroline

2012-01-01

Newborn intensive care is for critically ill newborns requiring constant and continuous care and supervision. The survival rates of critically ill infants and hospitalization in neonatal intensive care units (NICUs) have improved over the past 2 decades because of technological advances in neonatology. The design of NICUs may also have implications for the health of babies, parents, and staff. It is important therefore to articulate the design features of NICU that are associated with improved outcomes. The aim of this study was to explore the main features of the NICU design and to determine the advantages and limitations of the designs in terms of outcomes for babies, parents, and staff, predominately nurses. A systematic review of English-language, peer-reviewed articles was conducted for a period of 10 years, up to January 2011. Four online library databases and a number of relevant professional Web sites were searched using key words. There were 2 main designs of NICUs: open bay and single-family room. The open-bay environment develops communication and interaction with medical staff and nurses and has the ability to monitor multiple infants simultaneously. The single-family rooms were deemed superior for patient care and parent satisfaction. Key factors associated with improved outcomes included increased privacy, increased parental involvement in patient care, assistance with infection control, noise control, improved sleep, decreased length of hospital stay, and reduced rehospitalization. The design of NICUs has implications for babies, parents, and staff. An understanding of the positive design features needs to be considered by health service planners, managers, and those who design such specialized units.

Optimization of coastal protection measures on small islands in the northfrisian part of the North Sea

NASA Astrophysics Data System (ADS)

Wöffler, T.; Jensen, J.; Schüttrumpf, H.

2017-12-01

Low lying small islands are among the most vulnerable regions worldwide due to the consequences of climate change. The reasons for this are the concentration of infrastructure, geographical features and their small size. Worldwide special forms and adaptations of coastal protection strategies and measures can be found on small islands. In the northfrisian part of the North Sea worldwide unique strategies and measures have been developed in the last centuries due to the geographic location and the isolation during extreme events. One special feature of their coastal protection strategy is the lack of dikes. For this reason, the houses are built on artificial dwelling mounds in order to protect the inhabitants and their goods against frequently occurring inundations during storm surge seasons (up to 30 times a year). The Hallig islands themselves benefit by these inundations due to sediments, which are accumulated on the island's surfaces. This sedimentation has enabled a natural adaption to sea level rise in the past. Nevertheless, the construction methods of the coastal protection measures are mainly based on tradition and the knowledge of the inhabitants. No resilient design approaches and safety standards for these special structures like dwelling mounds and elevated revetments exist today. For this reason, neither a cost efficient construction nor a prioritization of measures is possible. Main part of this paper is the scientific investigation of the existing coastal protection measures with the objective of the development of design approaches and safety standards. The results will optimize the construction of the existing coastal protection measures and can be transferred to other small islands and low lying areas worldwide.

3D-glass molds for facile production of complex droplet microfluidic chips.

PubMed

Tovar, Miguel; Weber, Thomas; Hengoju, Sundar; Lovera, Andrea; Munser, Anne-Sophie; Shvydkiv, Oksana; Roth, Martin

2018-03-01

In order to leverage the immense potential of droplet microfluidics, it is necessary to simplify the process of chip design and fabrication. While polydimethylsiloxane (PDMS) replica molding has greatly revolutionized the chip-production process, its dependence on 2D-limited photolithography has restricted the design possibilities, as well as further dissemination of microfluidics to non-specialized labs. To break free from these restrictions while keeping fabrication straighforward, we introduce an approach to produce complex multi-height (3D) droplet microfluidic glass molds and subsequent chip production by PDMS replica molding. The glass molds are fabricated with sub-micrometric resolution using femtosecond laser machining technology, which allows directly realizing designs with multiple levels or even continuously changing heights. The presented technique significantly expands the experimental capabilities of the droplet microfluidic chip. It allows direct fabrication of multilevel structures such as droplet traps for prolonged observation and optical fiber integration for fluorescence detection. Furthermore, the fabrication of novel structures based on sloped channels (ramps) enables improved droplet reinjection and picoinjection or even a multi-parallelized drop generator based on gradients of confinement. The fabrication of these and other 3D-features is currently only available at such resolution by the presented strategy. Together with the simplicity of PDMS replica molding, this provides an accessible solution for both specialized and non-specialized labs to customize microfluidic experimentation and expand their possibilities.

Molecular chaperones: functional mechanisms and nanotechnological applications

NASA Astrophysics Data System (ADS)

Rosario Fernández-Fernández, M.; Sot, Begoña; María Valpuesta, José

2016-08-01

Molecular chaperones are a group of proteins that assist in protein homeostasis. They not only prevent protein misfolding and aggregation, but also target misfolded proteins for degradation. Despite differences in structure, all types of chaperones share a common general feature, a surface that recognizes and interacts with the misfolded protein. This and other, more specialized properties can be adapted for various nanotechnological purposes, by modification of the original biomolecules or by de novo design based on artificial structures.

On the writing of programming systems for spacecraft computers.

NASA Technical Reports Server (NTRS)

Mathur, F. P.; Rohr, J. A.

1972-01-01

Consideration of the systems designed to generate programs for the increasingly complex digital computers being used on board unmanned deep-space probes. Such programming systems must accommodate the special-purpose features incorporated in the hardware. The use of higher-level language facilities in the programming system can significantly simplify the task. Computers for Mariner and for the Outer Planets Grand Tour are briefly described, as well as their programming systems. Aspects of the higher level languages are considered.

Equipment for Nonlinear Photonics Research - Light Control and Image Transmission in Specially-Designed Photonic

DTIC Science & Technology

2014-03-14

photonic graphene”, Nature Material ,13, 57 (2014) ( published online: 10 November 2013 | doi :10.1038/nmat3783) • X. Qi, K.G. Makris, R. El-Ganainy...progress in the proposed research, with several important papers published in leading journals such as Nature Materials , Physics Review Letters...which has been published in Nature Material and Physics Review Letters. Our work was reported in a number of news media as well as featured in PRL

A fully automated digitally controlled 30-inch telescope

NASA Technical Reports Server (NTRS)

Colgate, S. A.; Moore, E. P.; Carlson, R.

1975-01-01

A fully automated 30-inch (75-cm) telescope has been successfully designed and constructed from a military surplus Nike-Ajax radar mount. Novel features include: closed-loop operation between mountain telescope and campus computer 30 km apart via microwave link, a TV-type sensor which is photon shot-noise limited, a special lightweight primary mirror, and a stepping motor drive capable of slewing and settling one degree in one second or a radian in fifteen seconds.

NOVEL CHAMBER DESIGN FOR AN IN-VACUUM CRYO-COOLED MINI-GAP UNDULATOR.

DOE Office of Scientific and Technical Information (OSTI.GOV)

HU, J.-P.; FOERSTER, C.L.; SKARITKA, J.R.

2006-05-24

A stainless steel, Ultra-High Vacuum (UHV) chamber, featuring a large vertical rectangular port (53''W by 16''H), has been fabricated to house the one-meter magnet assembly of a newly installed undulator insertion device for beamline X-25 at the National Synchrotron Light Source. To achieve UHV, the new chamber is equipped with a differential ion pump, NEG pump, nude ion gauge, residual gas analyzer, and an all metal roughing valve. Temperature of the magnet assembly is maintained below 90 C during vacuum bake. The large rectangular port cover is sealed to the main flange of the chamber using a one-piece flat aluminummore » gasket and special sealing surfaces developed exclusively by Nor-Cal Products, Inc. The large flange provides easy access to the gap of the installed magnet girders for in situ magnetic measurements and shimming. Special window ports were designed into the cover and chamber for manipulation of optical micrometers external to the chamber to provide precise measurements of the in-vacuum magnet gap. The vacuum chamber assembly features independently vacuum-isolated feedthroughs that can be used for either water-or-cryogenic refrigeration-cooling of the monolithic magnet girders. This would allow for cryogenic-cooled permanent magnet operation and has been successfully tested within temperature range of +100 C to -150 C. Details of the undulator assembly for beamline X-25 is described in the paper.« less

Improved adaptive splitting and selection: the hybrid training method of a classifier based on a feature space partitioning.

PubMed

Jackowski, Konrad; Krawczyk, Bartosz; Woźniak, Michał

2014-05-01

Currently, methods of combined classification are the focus of intense research. A properly designed group of combined classifiers exploiting knowledge gathered in a pool of elementary classifiers can successfully outperform a single classifier. There are two essential issues to consider when creating combined classifiers: how to establish the most comprehensive pool and how to design a fusion model that allows for taking full advantage of the collected knowledge. In this work, we address the issues and propose an AdaSS+, training algorithm dedicated for the compound classifier system that effectively exploits local specialization of the elementary classifiers. An effective training procedure consists of two phases. The first phase detects the classifier competencies and adjusts the respective fusion parameters. The second phase boosts classification accuracy by elevating the degree of local specialization. The quality of the proposed algorithms are evaluated on the basis of a wide range of computer experiments that show that AdaSS+ can outperform the original method and several reference classifiers.

Special feature on imaging systems and techniques

NASA Astrophysics Data System (ADS)

Yang, Wuqiang; Giakos, George

2013-07-01

The IEEE International Conference on Imaging Systems and Techniques (IST'2012) was held in Manchester, UK, on 16-17 July 2012. The participants came from 26 countries or regions: Austria, Brazil, Canada, China, Denmark, France, Germany, Greece, India, Iran, Iraq, Italy, Japan, Korea, Latvia, Malaysia, Norway, Poland, Portugal, Sweden, Switzerland, Taiwan, Tunisia, UAE, UK and USA. The technical program of the conference consisted of a series of scientific and technical sessions, exploring physical principles, engineering and applications of new imaging systems and techniques, as reflected by the diversity of the submitted papers. Following a rigorous review process, a total of 123 papers were accepted, and they were organized into 30 oral presentation sessions and a poster session. In addition, six invited keynotes were arranged. The conference not only provided the participants with a unique opportunity to exchange ideas and disseminate research outcomes but also paved a way to establish global collaboration. Following the IST'2012, a total of 55 papers, which were technically extended substantially from their versions in the conference proceeding, were submitted as regular papers to this special feature of Measurement Science and Technology . Following a rigorous reviewing process, 25 papers have been finally accepted for publication in this special feature and they are organized into three categories: (1) industrial tomography, (2) imaging systems and techniques and (3) image processing. These papers not only present the latest developments in the field of imaging systems and techniques but also offer potential solutions to existing problems. We hope that this special feature provides a good reference for researchers who are active in the field and will serve as a catalyst to trigger further research. It has been our great pleasure to be the guest editors of this special feature. We would like to thank the authors for their contributions, without which it would not be possible to have this special feature published. We are grateful to all reviewers, who devoted their time and effort, on a voluntary basis, to ensure that all submissions were reviewed rigorously and fairly. The publishing staff of Measurement Science and Technology are particularly acknowledged for giving us timely advice on guest-editing this special feature.

Automated Discovery of Machine-Specific Code Improvements

DTIC Science & Technology

1984-12-01

operation of the source language. Additional analysis may reveal special features of the target architecture that may be exploited to generate efficient...Additional analysis may reveal special features of the target architecture that may be exploited to generate efficient code. Such analysis is optional...incorporate knowledge of the source language, but do not refer to features of the target machine. These early phases are sometimes referred to as the

A hierarchical model of the evolution of human brain specializations

PubMed Central

Barrett, H. Clark

2012-01-01

The study of information-processing adaptations in the brain is controversial, in part because of disputes about the form such adaptations might take. Many psychologists assume that adaptations come in two kinds, specialized and general-purpose. Specialized mechanisms are typically thought of as innate, domain-specific, and isolated from other brain systems, whereas generalized mechanisms are developmentally plastic, domain-general, and interactive. However, if brain mechanisms evolve through processes of descent with modification, they are likely to be heterogeneous, rather than coming in just two kinds. They are likely to be hierarchically organized, with some design features widely shared across brain systems and others specific to particular processes. Also, they are likely to be largely developmentally plastic and interactive with other brain systems, rather than canalized and isolated. This article presents a hierarchical model of brain specialization, reviewing evidence for the model from evolutionary developmental biology, genetics, brain mapping, and comparative studies. Implications for the search for uniquely human traits are discussed, along with ways in which conventional views of modularity in psychology may need to be revised. PMID:22723350

Adaptive bra designs for the individuals with special needs

NASA Astrophysics Data System (ADS)

Imran, A.; Drean, E.; Schacher, L.; Adolphe, D.

2017-10-01

Nowadays the numbers of disabled and elderly people is increasing, and the development of adaptive clothing for these people is in demand. The purpose of this study is to add features in bra design, to make it “Easy on, Easy off", to encourage the hemiplegic females to begin to dress themselves and to make dressing easier and more protective for them. This adaptive bra design will offer benefits to the wearer that include independence, conformity to culture, concealment of the disability, comfort, psychological contentment, safety, and durability. Our adaptive bra will promote harmony between functionality and aesthetics. Our e-bra enables continuous, real-time monitoring to identify any pathophysiological changes by monitoring blood pressure, body temperature, respiratory rate, oxygen consumption, some neural activity.

Special Features of Structure Formation in Pipes from Medium-Carbon Low-Alloy Steel 32G2F Under Heat Treatment

NASA Astrophysics Data System (ADS)

Stepanov, A. I.; Belikov, S. V.; Musikhin, S. A.; Burmasov, S. P.; Popov, A. A.

2017-03-01

Special features of formation of structure and properties of seamless pipes from medium-carbon low-alloy steel for oil and gas applications are considered and associated with chemical inhomogeneity of the metal of the pipes.

PAHFIT: Properties of PAH Emission

NASA Astrophysics Data System (ADS)

Smith, J. D.; Draine, Bruce

2012-10-01

PAHFIT is an IDL tool for decomposing Spitzer IRS spectra of PAH emission sources, with a special emphasis on the careful recovery of ambiguous silicate absorption, and weak, blended dust emission features. PAHFIT is primarily designed for use with full 5-35 micron Spitzer low-resolution IRS spectra. PAHFIT is a flexible tool for fitting spectra, and you can add or disable features, compute combined flux bands, change fitting limits, etc., without changing the code. PAHFIT uses a simple, physically-motivated model, consisting of starlight, thermal dust continuum in a small number of fixed temperature bins, resolved dust features and feature blends, prominent emission lines (which themselves can be blended with dust features), as well as simple fully-mixed or screen dust extinction, dominated by the silicate absorption bands at 9.7 and 18 microns. Most model components are held fixed or are tightly constrained. PAHFIT uses Drude profiles to recover the full strength of dust emission features and blends, including the significant power in the wings of the broad emission profiles. This means the resulting feature strengths are larger (by factors of 2-4) than are recovered by methods which estimate the underlying continuum using line segments or spline curves fit through fiducial wavelength anchors.

Identification of input variables for feature based artificial neural networks-saccade detection in EOG recordings.

PubMed

Tigges, P; Kathmann, N; Engel, R R

1997-07-01

Though artificial neural networks (ANN) are excellent tools for pattern recognition problems when signal to noise ratio is low, the identification of decision relevant features for ANN input data is still a crucial issue. The experience of the ANN designer and the existing knowledge and understanding of the problem seem to be the only links for a specific construction. In the present study a backpropagation ANN based on modified raw data inputs showed encouraging results. Investigating the specific influences of prototypical input patterns on a specially designed ANN led to a new sparse and efficient input data presentation. This data coding obtained by a semiautomatic procedure combining existing expert knowledge and the internal representation structures of the raw data based ANN yielded a list of feature vectors, each representing the relevant information for saccade identification. The feature based ANN produced a reduction of the error rate of nearly 40% compared with the raw data ANN. An overall correct classification of 92% of so far unknown data was realized. The proposed method of extracting internal ANN knowledge for the production of a better input data representation is not restricted to EOG recordings, and could be used in various fields of signal analysis.

Prediction of human disease-associated phosphorylation sites with combined feature selection approach and support vector machine.

PubMed

Xu, Xiaoyi; Li, Ao; Wang, Minghui

2015-08-01

Phosphorylation is a crucial post-translational modification, which regulates almost all cellular processes in life. It has long been recognised that protein phosphorylation has close relationship with diseases, and therefore many researches are undertaken to predict phosphorylation sites for disease treatment and drug design. However, despite the success achieved by these approaches, no method focuses on disease-associated phosphorylation sites prediction. Herein, for the first time the authors propose a novel approach that is specially designed to identify associations between phosphorylation sites and human diseases. To take full advantage of local sequence information, a combined feature selection method-based support vector machine (CFS-SVM) that incorporates minimum-redundancy-maximum-relevance filtering process and forward feature selection process is developed. Performance evaluation shows that CFS-SVM is significantly better than the widely used classifiers including Bayesian decision theory, k nearest neighbour and random forest. With the extremely high specificity of 99%, CFS-SVM can still achieve a high sensitivity. Besides, tests on extra data confirm the effectiveness and general applicability of CFS-SVM approach on a variety of diseases. Finally, the analysis of selected features and corresponding kinases also help the understanding of the potential mechanism of disease-phosphorylation relationships and guide further experimental validations.

Specification for strontium-90 500-watt(e) radioisotopic thermoelectric generator

NASA Astrophysics Data System (ADS)

Hammel, T.; Himes, J.; Lieberman, A.; McGrew, J. W.; Owings, D.; Schumann, F.

1983-04-01

A conceptual design for a demonstration 500-watt(e) radioisotopic thermoelectric generator (RTG) was created. The design effort was divided into two tasks, viz., create a design specification for a capsule strenth member that utilizes a standard Strontium 90 fluoride filled WESF inner liner, and create a conceptual design for a 500-watt(e) RTG. The strength member specification was designed to survive an external pressure of 24,500 psi and meet the requirements of special form radioisotope heat sources. Therefore the capsule is if desired, licensed for domestic and international transport. The design for the RTG features a radioisotopic heat source, an array of nine capsules in a tungsten biological shield, four current technology series connected thermoelectric conversion modules, low conductivity thermal insulation, and a passive finned housing radiator for waste heat dissipation. The preliminary RTG specification formulated previous to contract award was met or exceeded.

A study of optical design of power-saving backlight module with external illuminance

NASA Astrophysics Data System (ADS)

Fang, Yi-Chin; Tzeng, Yih-Fong

2014-05-01

In backlight modules, the light guide plate (LGP) is a key component for performance and also facilitates access to develop LGPs on its own. In this research, we propose a newly developed method: LEDs with freeform as a lighting source, are employed to integrate and manipulate the specially designed and optimized 3D-like pattern distribution of the micro features in order to obtain the required optical characteristics at maximal performance. In this research propose the concept of Light Guide Film(LGF) at the back side of Back Light Unit(BLU). This new design may induce the exterior light ,then improve the power-saving of existent BLU. Two design models are reseated: One is design for 14 inch LCD monitor of notebook computer, which might improve 21% compared to traditional one. Another is designed for 3.5 inch LCD for mobile phone display ,which might improve 15% compared to traditional one.

Trends in Dielectric Etch for Microelectronics Processing

NASA Astrophysics Data System (ADS)

Hudson, Eric A.

2003-10-01

Dielectric etch technology faces many challenges to meet the requirements for leading-edge microelectronics processing. The move to sub 100-nm device design rules increases the aspect ratios of certain features, imposes tighter restrictions on etched features' critical dimensions, and increases the density of closely packed arrays of features. Changes in photolithography are driving transitions to new photoresist materials and novel multilayer resist methods. The increasing use of copper metallization and low-k interlayer dielectric materials has introduced dual-damascene integration methods, with specialized dielectric etch applications. A common need is the selective removal of multiple layers which have very different compositions, while maintaining close control of the etched features' profiles. To increase productivity, there is a growing trend toward in-situ processing, which allows several films to be successively etched during a single pass through the process module. Dielectric etch systems mainly utilize capacitively coupled etch reactors, operating with medium-density plasmas and low gas residence time. Commercial technology development increasingly relies upon plasma diagnostics and modeling to reduce development cycle time and maximize performance.

Crossing borders: High school science teachers learning to teach the specialized language of science

NASA Astrophysics Data System (ADS)

Patrick, Jennifer Drake

The highly specialized language of science is both challenging and alienating to adolescent readers. This study investigated how secondary science teachers learn to teach the specialized language of science in their classrooms. Three research questions guided this study: (a) what do science teachers know about teaching reading in science? (b) what understanding about the unique language demands of science reading do they construct through professional development? and (c) how do they integrate what they have learned about these specialized features of science language into their teaching practices? This study investigated the experience of seven secondary science teachers as they participated in a professional development program designed to teach them about the specialized language of science. Data sources included participant interviews, audio-taped professional development sessions, field notes from classroom observations, and a prior knowledge survey. Results from this study suggest that science teachers (a) were excited to learn about disciplinary reading practices, (b) developed an emergent awareness of the specialized features of science language and the various genres of science writing, and (c) recognized that the challenges of science reading goes beyond vocabulary. These teachers' efforts to understand and address the language of science in their teaching practices were undermined by their lack of basic knowledge of grammar, availability of time and resources, their prior knowledge and experiences, existing curriculum, and school structure. This study contributes to our understanding of how secondary science teachers learn about disciplinary literacy and apply that knowledge in their classroom instruction. It has important implications for literacy educators and science educators who are interested in using language and literacy practices in the service of science teaching and learning. (Full text of this dissertation may be available via the University of Florida Libraries web site. Please check http://www.uflib.ufl.edu/etd.html)

Eyes Matched to the Prize: The State of Matched Filters in Insect Visual Circuits.

PubMed

Kohn, Jessica R; Heath, Sarah L; Behnia, Rudy

2018-01-01

Confronted with an ever-changing visual landscape, animals must be able to detect relevant stimuli and translate this information into behavioral output. A visual scene contains an abundance of information: to interpret the entirety of it would be uneconomical. To optimally perform this task, neural mechanisms exist to enhance the detection of important features of the sensory environment while simultaneously filtering out irrelevant information. This can be accomplished by using a circuit design that implements specific "matched filters" that are tuned to relevant stimuli. Following this rule, the well-characterized visual systems of insects have evolved to streamline feature extraction on both a structural and functional level. Here, we review examples of specialized visual microcircuits for vital behaviors across insect species, including feature detection, escape, and estimation of self-motion. Additionally, we discuss how these microcircuits are modulated to weigh relevant input with respect to different internal and behavioral states.

Computational methods for fracture analysis of heavy-section steel technology (HSST) pressure vessel experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bass, B.R.; Bryan, R.H.; Bryson, J.W.

This paper summarizes the capabilities and applications of the general-purpose and special-purpose computer programs that have been developed for use in fracture mechanics analyses of HSST pressure vessel experiments. Emphasis is placed on the OCA/USA code, which is designed for analysis of pressurized-thermal-shock (PTS) conditions, and on the ORMGEN/ADINA/ORVIRT system which is used for more general analysis. Fundamental features of these programs are discussed, along with applications to pressure vessel experiments.

Vane Pump Casing Machining of Dumpling Machine Based on CAD/CAM

NASA Astrophysics Data System (ADS)

Huang, Yusen; Li, Shilong; Li, Chengcheng; Yang, Zhen

Automatic dumpling forming machine is also called dumpling machine, which makes dumplings through mechanical motions. This paper adopts the stuffing delivery mechanism featuring the improved and specially-designed vane pump casing, which can contribute to the formation of dumplings. Its 3D modeling in Pro/E software, machining process planning, milling path optimization, simulation based on UG and compiling post program were introduced and verified. The results indicated that adoption of CAD/CAM offers firms the potential to pursue new innovative strategies.

Development of approaches to a third-generation carbohydrate-conjugate vaccine against Streptococcus pneumoniae: the search for optimal oligosaccharide ligands

NASA Astrophysics Data System (ADS)

Gening, M. L.; Kurbatova, E. A.; Tsvetkov, Yu E.; Nifantiev, N. E.

2015-11-01

The review addresses the application of synthetic oligosaccharides related to fragments of capsular polysaccharides from different serotypes of the bacterium Streptococcus pneumoniae for the design of third-generation pneumococcal conjugate vaccines. Special focus is given to characteristic features of the chemical structures of oligosaccharides required for the induction of the protective immune response when using synthetic glycoconjugate vaccines based on oligosaccharide ligands and carrier proteins. The bibliography includes 101 references.

Vision-sensing image analysis for GTAW process control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Long, D.D.

1994-11-01

Image analysis of a gas tungsten arc welding (GTAW) process was completed using video images from a charge coupled device (CCD) camera inside a specially designed coaxial (GTAW) electrode holder. Video data was obtained from filtered and unfiltered images, with and without the GTAW arc present, showing weld joint features and locations. Data Translation image processing boards, installed in an IBM PC AT 386 compatible computer, and Media Cybernetics image processing software were used to investigate edge flange weld joint geometry for image analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baucom, R.M.; Marchello, J.M.

Thermoplastic prepregs of LARC-TPI have been produced in a fluidized bed unit on spread continuous fiber tows. The powders are melted on the fibers by radiant heating to adhere the polymer to the fiber. This process produces tow prepreg uniformly without imposing severe stress on the fibers or requiring long high temperature residence times for the polymer. Unit design theory and operating correlations have been developed to provide the basis for scale up to commercial operation. Special features of the operation are the pneumatic tow spreader, fluidized bed and resin feed systems.

BioNetFit: a fitting tool compatible with BioNetGen, NFsim and distributed computing environments

DOE PAGES

Thomas, Brandon R.; Chylek, Lily A.; Colvin, Joshua; ...

2015-11-09

Rule-based models are analyzed with specialized simulators, such as those provided by the BioNetGen and NFsim open-source software packages. Here in this paper, we present BioNetFit, a general-purpose fitting tool that is compatible with BioNetGen and NFsim. BioNetFit is designed to take advantage of distributed computing resources. This feature facilitates fitting (i.e. optimization of parameter values for consistency with data) when simulations are computationally expensive.

Unloading shoes for osteoarthritis of the knee: protocol for the SHARK randomised controlled trial

PubMed Central

2014-01-01

Background Knee osteoarthritis (OA) is a common and disabling condition. Abnormalities in knee loading play an important role in disease pathogenesis, yet there are few non-surgical treatments for knee OA capable of reducing knee load. This two-arm randomised controlled trial is investigating the efficacy of specially-designed unloading shoes for the treatment of symptoms in people with knee OA. Methods/Design 164 people with symptomatic medial tibiofemoral joint OA will be recruited from the community and randomly allocated to receive either unloading shoes or control shoes. Unloading shoes have a specially-designed triple-density midsole where the medial side is softer than normal and the lateral side harder as well as a lateral wedge between the sole and sock-liner. Control shoes are standard athletic shoes and do not contain these features. Participants will be blinded to shoe allocation and will be instructed to wear the shoes as much as possible every day for 6 months, for a minimum of 4 hours per day. The primary outcomes are knee pain (numerical rating scale) and self-reported physical function (Western Ontario and McMaster Universities Osteoarthritis Index) measured at baseline and 6 months. Secondary outcomes include additional measures of knee pain, knee stiffness, participant global ratings of change in symptoms, quality-of-life and physical activity. Conclusions The findings from this study will help determine whether specially-designed unloading shoes are efficacious in the management of knee OA. Trial registration Australian New Zealand Clinical Trials Registry reference: ACTRN12613000851763. PMID:24555418

Fast Solution in Sparse LDA for Binary Classification

NASA Technical Reports Server (NTRS)

Moghaddam, Baback

2010-01-01

An algorithm that performs sparse linear discriminant analysis (Sparse-LDA) finds near-optimal solutions in far less time than the prior art when specialized to binary classification (of 2 classes). Sparse-LDA is a type of feature- or variable- selection problem with numerous applications in statistics, machine learning, computer vision, computational finance, operations research, and bio-informatics. Because of its combinatorial nature, feature- or variable-selection problems are NP-hard or computationally intractable in cases involving more than 30 variables or features. Therefore, one typically seeks approximate solutions by means of greedy search algorithms. The prior Sparse-LDA algorithm was a greedy algorithm that considered the best variable or feature to add/ delete to/ from its subsets in order to maximally discriminate between multiple classes of data. The present algorithm is designed for the special but prevalent case of 2-class or binary classification (e.g. 1 vs. 0, functioning vs. malfunctioning, or change versus no change). The present algorithm provides near-optimal solutions on large real-world datasets having hundreds or even thousands of variables or features (e.g. selecting the fewest wavelength bands in a hyperspectral sensor to do terrain classification) and does so in typical computation times of minutes as compared to days or weeks as taken by the prior art. Sparse LDA requires solving generalized eigenvalue problems for a large number of variable subsets (represented by the submatrices of the input within-class and between-class covariance matrices). In the general (fullrank) case, the amount of computation scales at least cubically with the number of variables and thus the size of the problems that can be solved is limited accordingly. However, in binary classification, the principal eigenvalues can be found using a special analytic formula, without resorting to costly iterative techniques. The present algorithm exploits this analytic form along with the inherent sequential nature of greedy search itself. Together this enables the use of highly-efficient partitioned-matrix-inverse techniques that result in large speedups of computation in both the forward-selection and backward-elimination stages of greedy algorithms in general.

31 CFR Appendix A to Chapter V - Alphabetical Listing of Blocked Persons, Blocked Vessels, Specially Designated Nationals...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Alphabetical Listing of Blocked Persons, Blocked Vessels, Specially Designated Nationals, Specially Designated Terrorists, Specially Designated Global Terrorists, Foreign Terrorist Organizations, and Specially Designated Narcotics Traffickers (as of May 13, 2010) A Appendix A to Chapte...

Lithotripsy Performance of Specially Designed Laser Fiber Tips.

PubMed

Kronenberg, Peter; Traxer, Olivier

2016-05-01

We evaluated and compared a standard laser lithotripsy fiber to laser fibers claimed to have lithotripsy performance enhancing features. A special AccuMax™ 200 polished tip fiber and an AccuTrac™ ball-shaped tip fiber, each with an approximately 240 μm core, were compared to a standard 272 μm core fiber (Rocamed™). The polished and ball-shaped tip fibers were used and reused without preparation. The standard fiber was stripped and cleaved according to manufacturer instructions after each experiment. An automated laser fragmentation testing system was used to perform multiple 30-second laser lithotripsy experiments. To mimic most typical lithotripsy conditions soft and hard stone materials were used with high frequency, low pulse energy (20 Hz and 0.5 J) or with low frequency, high pulse energy (5 Hz and 2.0 J) lithotripter settings. Ablation volumes and laser fiber tip photographs before and after lithotripsy were compared. The standard and ball-shaped tip fibers did not differ in ablation volume (p = 0.72) but they ablated 174% and 188% more stone, respectively, than the polished tip fiber (p <0.0001). The ball-shaped tip showed remarkable fiber tip degradation after short-term use at low frequency, high pulse energy settings. When high pulse energy settings were applied first even for short-term use, the ablation volume achieved by the polished and ball-shaped tip fibers at high frequency, low pulse energy settings decreased more than 20%. The standard laser fiber was as good as and sometimes better than the specially designed fibers. Rapid degradation of the specially designed laser fiber tips strongly limits their general usefulness but ball-shaped tip fibers may be useful in specific situations. Copyright © 2016 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Suicide Note Sentiment Classification: A Supervised Approach Augmented by Web Data

PubMed Central

Xu, Yan; Wang, Yue; Liu, Jiahua; Tu, Zhuowen; Sun, Jian-Tao; Tsujii, Junichi; Chang, Eric

2012-01-01

Objective: To create a sentiment classification system for the Fifth i2b2/VA Challenge Track 2, which can identify thirteen subjective categories and two objective categories. Design: We developed a hybrid system using Support Vector Machine (SVM) classifiers with augmented training data from the Internet. Our system consists of three types of classification-based systems: the first system uses spanning n-gram features for subjective categories, the second one uses bag-of-n-gram features for objective categories, and the third one uses pattern matching for infrequent or subtle emotion categories. The spanning n-gram features are selected by a feature selection algorithm that leverages emotional corpus from weblogs. Special normalization of objective sentences is generalized with shallow parsing and external web knowledge. We utilize three sources of web data: the weblog of LiveJournal which helps to improve the feature selection, the eBay List which assists in special normalization of information and instructions categories, and the suicide project web which provides unlabeled data with similar properties as suicide notes. Measurements: The performance is evaluated by the overall micro-averaged precision, recall and F-measure. Result: Our system achieved an overall micro-averaged F-measure of 0.59. Happiness_peacefulness had the highest F-measure of 0.81. We were ranked as the second best out of 26 competing teams. Conclusion: Our results indicated that classifying fine-grained sentiments at sentence level is a non-trivial task. It is effective to divide categories into different groups according to their semantic properties. In addition, our system performance benefits from external knowledge extracted from publically available web data of other purposes; performance can be further enhanced when more training data is available. PMID:22879758

Development of a neutronics calculation method for designing commercial type Japanese sodium-cooled fast reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takeda, T.; Shimazu, Y.; Hibi, K.

2012-07-01

Under the R and D project to improve the modeling accuracy for the design of fast breeder reactors the authors are developing a neutronics calculation method for designing a large commercial type sodium- cooled fast reactor. The calculation method is established by taking into account the special features of the reactor such as the use of annular fuel pellet, inner duct tube in large fuel assemblies, large core. The Verification and Validation, and Uncertainty Qualification (V and V and UQ) of the calculation method is being performed by using measured data from the prototype FBR Monju. The results of thismore » project will be used in the design and analysis of the commercial type demonstration FBR, known as the Japanese Sodium fast Reactor (JSFR). (authors)« less

Flexible Wing Model for Structural Sizing and Multidisciplinary Design Optimization of a Strut-Braced Wing

NASA Technical Reports Server (NTRS)

Gern, Frank H.; Naghshineh, Amir H.; Sulaeman, Erwin; Kapania, Rakesh K.; Haftka, Raphael T.

2000-01-01

This paper describes a structural and aeroelastic model for wing sizing and weight calculation of a strut-braced wing. The wing weight is calculated using a newly developed structural weight analysis module considering the special nature of strut-braced wings. A specially developed aeroelastic model enables one to consider wing flexibility and spanload redistribution during in-flight maneuvers. The structural model uses a hexagonal wing-box featuring skin panels, stringers, and spar caps, whereas the aerodynamics part employs a linearized transonic vortex lattice method. Thus, the wing weight may be calculated from the rigid or flexible wing spanload. The calculations reveal the significant influence of the strut on the bending material weight of the wing. The use of a strut enables one to design a wing with thin airfoils without weight penalty. The strut also influences wing spanload and deformations. Weight savings are not only possible by calculation and iterative resizing of the wing structure according to the actual design loads. Moreover, as an advantage over the cantilever wing, employment of the strut twist moment for further load alleviation leads to increased savings in structural weight.

The NASA Langley Laminar-Flow-Control (LFC) experiment on a swept, supercritical airfoil: Design overview

NASA Technical Reports Server (NTRS)

Harris, Charles D.; Harvey, William D.; Brooks, Cuyler W., Jr.

1988-01-01

A large-chord, swept, supercritical, laminar-flow-control (LFC) airfoil was designed and constructed and is currently undergoing tests in the Langley 8 ft Transonic Pressure Tunnel. The experiment was directed toward evaluating the compatibility of LFC and supercritical airfoils, validating prediction techniques, and generating a data base for future transport airfoil design as part of NASA's ongoing research program to significantly reduce drag and increase aircraft efficiency. Unique features of the airfoil included a high design Mach number with shock free flow and boundary layer control by suction. Special requirements for the experiment included modifications to the wind tunnel to achieve the necessary flow quality and contouring of the test section walls to simulate free air flow about a swept model at transonic speeds. Design of the airfoil with a slotted suction surface, the suction system, and modifications to the tunnel to meet test requirements are discussed.

Design, Project Execution, and Commissioning of the 1.8 K Superfluid Helium Refrigeration System for SRF Cryomodule Testing

DOE PAGES

Treite, P.; Nuesslein, U.; Jia, Yi; ...

2015-07-15

The Fermilab Cryomodule Test Facility (CMTF) provides a test bed to measure the performance of superconducting radiofrequency (SRF) cryomodules (CM). These SRF components form the basic building blocks of future high intensity accelerators such as the International Linear Collider (ILC) and a Muon Collider. Linde Kryotechnik AG and Linde Cryogenics have designed, constructed and commissioned the superfluid helium refrigerator needed to support SRF component testing at the CMTF Facility. The hybrid refrigerator is designed to operate in a variety of modes and under a wide range of boundary conditions down to 1.8 Kelvin set by CM design. Special features ofmore » the refrigerator include the use of warm and cold compression and high efficiency turbo expanders.This paper gives an overview on the wide range of the challenging cooling requirements, the design, fabrication and the commissioning of the installed cryogenic system.« less

Transforming a conventional theatre into a gynaecological endoscopy unit.

PubMed

Anastasakis, E; Protopapas, A; Daskalakis, G; Papadakis, M; Milingos, S; Antsaklis, A

2007-01-01

Most minimally invasive procedures are now performed in operating rooms that were originally designed for traditional open surgery. We designed an endoscopic theatre based on our experience with special features specific for gynaecological endoscopy. We designed a detailed plan with an architect's aid of a gynaecological unit (based on a Greek presidential decree published in 1991). The space utilized was that of a conventional theatre. With the architectural plan we anticipated every area needed in a gynaecological endoscopic theatre. A twin theatre was considered appropriate in order for the surgical team to operate alternatively in one theatre while the other is being cleaned and prepared for use. The design of a unit dedicated to gynaecologic laparoscopy is a multidisciplinary task where the endoscopic surgeon undertakes an active and prominent role. It is a project with great benefits and rewards for all parties involved. We present our design for evaluation.

Health Needs of Transition-Aged Youth: Feature Issue of IMPACT.

ERIC Educational Resources Information Center

Tommet, Pat, Ed.; And Others

1994-01-01

This feature issue explores health needs of youth with disabilities as they make the transition from child to adult roles. "School Health Services: Supporting Students with Special Health Needs" (Dee K. Bauer) describes the role of the special needs nurse on multidisciplinary teams in Multnomah County (Oregon) schools. Two articles deal with…

Thermal imaging as a biometrics approach to facial signature authentication.

PubMed

Guzman, A M; Goryawala, M; Wang, Jin; Barreto, A; Andrian, J; Rishe, N; Adjouadi, M

2013-01-01

A new thermal imaging framework with unique feature extraction and similarity measurements for face recognition is presented. The research premise is to design specialized algorithms that would extract vasculature information, create a thermal facial signature and identify the individual. The proposed algorithm is fully integrated and consolidates the critical steps of feature extraction through the use of morphological operators, registration using the Linear Image Registration Tool and matching through unique similarity measures designed for this task. The novel approach at developing a thermal signature template using four images taken at various instants of time ensured that unforeseen changes in the vasculature over time did not affect the biometric matching process as the authentication process relied only on consistent thermal features. Thirteen subjects were used for testing the developed technique on an in-house thermal imaging system. The matching using the similarity measures showed an average accuracy of 88.46% for skeletonized signatures and 90.39% for anisotropically diffused signatures. The highly accurate results obtained in the matching process clearly demonstrate the ability of the thermal infrared system to extend in application to other thermal imaging based systems. Empirical results applying this approach to an existing database of thermal images proves this assertion.

Traditional Ecological Knowledge and Global Environmental Change: Research findings and policy implications

PubMed Central

Gómez-Baggethun, Erik; Corbera, Esteve; Reyes-García, Victoria

2015-01-01

This paper introduces the special feature of Ecology and Society entitled “Traditional Ecological Knowledge and Global Environmental Change. The special feature addresses two main research themes. The first theme concerns the resilience of Traditional Ecological Knowledge (hereafter TEK) and the conditions that might explain its loss or persistence in the face of global change. The second theme relates to new findings regarding the way in which TEK strengthens community resilience to respond to the multiple stressors of global environmental change. Those themes are analyzed using case studies from Africa, Asia, America and Europe. Theoretical insights and empirical findings from the studies suggest that despite the generalized worldwide trend of TEK erosion, substantial pockets of TEK persist in both developing and developed countries. A common trend on the studies presented here is hybridization, where traditional knowledge, practices, and beliefs are merged with novel forms of knowledge and technologies to create new knowledge systems. The findings also reinforce previous hypotheses pointing at the importance of TEK systems as reservoirs of experiential knowledge that can provide important insights for the design of adaptation and mitigation strategies to cope with global environmental change. Based on the results from papers in this feature, we discuss policy directions that might help to promote maintenance and restoration of living TEK systems as sources of social-ecological resilience. PMID:26097492

A Bayesian-frequentist two-stage single-arm phase II clinical trial design.

PubMed

Dong, Gaohong; Shih, Weichung Joe; Moore, Dirk; Quan, Hui; Marcella, Stephen

2012-08-30

It is well-known that both frequentist and Bayesian clinical trial designs have their own advantages and disadvantages. To have better properties inherited from these two types of designs, we developed a Bayesian-frequentist two-stage single-arm phase II clinical trial design. This design allows both early acceptance and rejection of the null hypothesis ( H(0) ). The measures (for example probability of trial early termination, expected sample size, etc.) of the design properties under both frequentist and Bayesian settings are derived. Moreover, under the Bayesian setting, the upper and lower boundaries are determined with predictive probability of trial success outcome. Given a beta prior and a sample size for stage I, based on the marginal distribution of the responses at stage I, we derived Bayesian Type I and Type II error rates. By controlling both frequentist and Bayesian error rates, the Bayesian-frequentist two-stage design has special features compared with other two-stage designs. Copyright © 2012 John Wiley & Sons, Ltd.

Music in Special Education [with DVD

ERIC Educational Resources Information Center

Adamek, Mary; Darrow, Alice-Ann

2005-01-01

This book explains essential features of special education that are important for interdisciplinary communication and effective teaching. Part I introduces the reader to historical and instructional foundations of music in special education. Major topics and developments in the field of special education, important terminology, and curricular…

A Rover Operations Protocol for Maintaining Compliance with Planetary Protection Requirements

NASA Astrophysics Data System (ADS)

Jones, Melissa; Vasavada, Ashwin

2016-07-01

The Mars Science Laboratory (MSL) mission, with its Curiosity rover, arrived at Gale Crater in August 2012 with the scientific objective of assessing the past and present habitability of the landing site area. It is not a life detection mission, but one that uses geological, geochemical, and environmental measurements to understand whether past and present conditions could have supported life. The MSL mission is designated Planetary Protection Category IVa, with specific restrictions on the landing site and surface operations. In particular, the mission is prohibited from introducing any hardware into a Mars Special Region, as defined by COSPAR policy and in NASA document NPR 8020.12D. Fluid-formed features such as recurring slope lineae are included in this prohibition. Finally, any evidence suggesting the presence of Special Regions or flowing liquid at the actual MSL landing site shall be communicated to the NASA Planetary Protection Officer immediately, and physical contact by the rover with such features shall be entirely avoided. The MSL Project has recently developed and instituted a protocol in daily rover operations to ensure ongoing compliance with its planetary protection categorization. A particular challenge comes from the fact that the characteristics of potential Special Regions may not be obvious in the rover downlink data (e.g., landscape images, chemical measurements, or meteorology), or easily distinguishable from characteristics of other processes that do not imply Special Regions. For this reason, the first step in the process would be for the lead scientist for that day of operations (a role that rotates through senior scientists on the mission) to scrutinize all the targets that may receive interaction by rover hardware, such as targets for arm contact, or paths for wheel contact. Based on the expertise of the lead scientist, and definitions of Mars Special Regions, if any features of concern are identified, the other scientists on duty that day would be brought into a discussion. Typically the tactical team has a mix of experts in geology, astrobiology, geological materials, geochemistry, and meteorology. If this team cannot rule out the concern of introducing rover hardware into a potential Special Region, arm and wheel usage would be prohibited in that day's planning. This halt in tactical operations would allow a separate Special Regions Team to re-consider the data more deliberately, but still on timeline that would allow rover operations to resume as quickly as possible. This team is chosen in advance to have a broad range of expertise that can weigh the evidence for a potential Special Region, including representatives from the institutional planetary protection organization and involvement of the MSL Project Manager. If this team cannot rule out the concern, rover operations continue to hold while the NASA Planetary Protection Office is engaged to determine the best course of action for the mission. It is worth noting that evidence of modern, fluid-formed features at Gale Crater is not expected and would represent a major scientific discovery for the mission and Mars Exploration Program. However, this low-likelihood outcome still requires vigilance to ensure compliance with planetary protection requirements.

Exploring Specialized STEM High Schools: Three Dissertation Studies Examining Commonalities and Differences Across Six Case Studies

NASA Astrophysics Data System (ADS)

Tofel-Grehl, Colby

This dissertation is comprised of three independently conducted analyses of a larger investigation into the practices and features of specialized STEM high schools. While educators and policy makers advocate the development of many new specialized STEM high schools, little is known about the unique features and practices of these schools. The results of these manuscripts add to the literature exploring the promise of specialized STEM schools. Manuscript 1¹ is a qualitative investigation of the common features of STEM schools across multiple school model types. Schools were found to possess common cultural and academic features regardless of model type. Manuscript 2² builds on the findings of manuscript 1. With no meaningful differences found attributable to model type, the researchers used grounded theory to explore the relationships between observed differences among programs as related to the intensity of the STEM experience offered at schools. Schools were found to fall into two categories, high STEM intensity (HSI) and low STEM intensity (LSI), based on five major traits. Manuscript 3³ examines the commonalities and differences in classroom discourse and teachers' questioning techniques in STEM schools. It explicates these discursive practices in order to explore instructional practices across schools. It also examines factors that may influence classroom discourse such as discipline, level of teacher education, and course status as required or elective. Collectively, this research furthers the agenda of better understanding the potential advantages of specialized STEM high schools for preparing a future scientific workforce. ¹Tofel-Grehl, C., Callahan, C., & Gubbins, E. (2012). STEM high school communities: Common and differing features. Manuscript in preparation. ²Tofel-Grehl, C., Callahan, C., & Gubbins, E. (2012). Variations in the intensity of specialized science, technology, engineering, and mathematics (STEM) high schools. Manuscript in preparation. ³Tofel-Grehl, C., Callahan, C., & Gubbins, E. (2012). Comparative analyses of discourse in specialized STEM school classes. Manuscript in preparation.

All-solid-state radiometers for environmental studies to 700 GHz

NASA Technical Reports Server (NTRS)

Zimmermann, Ralph; Zimmermann, Ruediger; Zimmermann, Peter

1992-01-01

We report results with an all-solid-state radiometer for measurements of the ClO molecule at 649 GHz. The project is part of a program to provide low-noise, low-weight, low-power radiometers for space operation, and special effort has been expended on the development of high-efficiency solid-state frequency multipliers and Schottky-barrier mixers with low local oscillator power requirements. The best measured system noise temperature was 1750 K with the mixer and preamplifier cooled to 77 K. The mixer diode was easily pumped into saturation, indicating that the design has excellent prospects of operating at higher frequencies - our present design goal being 1 THz. We comment on the principal design features of such systems and will report on stratospheric measurements performed with this system.

An ultrahigh vacuum multipurpose specimen chamber with sample introduction system for in situ transmission electron microscopy investigations

NASA Technical Reports Server (NTRS)

Heinemann, K.; Poppa, H.

1986-01-01

A commercial transmission electron microscope (TEM), with flat-plate upper pole piece configuration of the objective lens, and top-entry specimen introduction was modified by introducing an ultrahigh vacuum (UHV) specimen chamber for in situ TEM experimentation. The pumping and design principles and special features of this UHV chamber, which makes it possible to obtain 5 x 10 to the -10th mbar pressure at the site of the specimen, while maintaining the airlock system that allows operation in the 10 to the -10th mbar range within 15 min after specimen change, are described. Design operating pressures and image quality (resolution of metal particles smaller than 1 nm in size) were achieved. Schematic drawings and design dimensions are included.

The Stanford MediaServer Project: strategies for building a flexible digital media platform to support biomedical education and research.

PubMed Central

Durack, Jeremy C.; Chao, Chih-Chien; Stevenson, Derek; Andriole, Katherine P.; Dev, Parvati

2002-01-01

Medical media collections are growing at a pace that exceeds the value they currently provide as research and educational resources. To address this issue, the Stanford MediaServer was designed to promote innovative multimedia-based application development. The nucleus of the MediaServer platform is a digital media database strategically designed to meet the information needs of many biomedical disciplines. Key features include an intuitive web-based interface for collaboratively populating the media database, flexible creation of media collections for diverse and specialized purposes, and the ability to construct a variety of end-user applications from the same database to support biomedical education and research. PMID:12463820

The Stanford MediaServer Project: strategies for building a flexible digital media platform to support biomedical education and research.

PubMed

Durack, Jeremy C; Chao, Chih-Chien; Stevenson, Derek; Andriole, Katherine P; Dev, Parvati

2002-01-01

Medical media collections are growing at a pace that exceeds the value they currently provide as research and educational resources. To address this issue, the Stanford MediaServer was designed to promote innovative multimedia-based application development. The nucleus of the MediaServer platform is a digital media database strategically designed to meet the information needs of many biomedical disciplines. Key features include an intuitive web-based interface for collaboratively populating the media database, flexible creation of media collections for diverse and specialized purposes, and the ability to construct a variety of end-user applications from the same database to support biomedical education and research.

Engineering design of sub-micron topographies for simultaneously adherent and reflective metal-polymer interfaces

NASA Technical Reports Server (NTRS)

Brown, Christopher A.

1993-01-01

The approach of the project is to base the design of multi-function, reflective topographies on the theory that topographically dependent phenomena react with surfaces and interfaces at certain scales. The first phase of the project emphasizes the development of methods for understanding the sizes of topographic features which influence reflectivity. Subsequent phases, if necessary, will address the scales of interaction for adhesion and manufacturing processes. A simulation of the interaction of electromagnetic radiation, or light, with a reflective surface is performed using specialized software. Reflectivity of the surface as a function of scale is evaluated and the results from the simulation are compared with reflectivity measurements made on multi-function, reflective surfaces.

Use of shuttle for life sciences

NASA Technical Reports Server (NTRS)

Mcgaughy, R. E.

1972-01-01

The use of the space shuttle in carrying out biological and medical research programs, with emphasis on the sortie module, is examined. Detailed descriptions are given of the goals of space life science disciplines, how the sortie can meet these goals, and what shuttle design features are necessary for a viable biological and medical experiment program. Conclusions show that the space shuttle sortie module is capable of accommodating all biological experiments contemplated at this time except for those involving large specimens or large populations of small animals; however, these experiments can be done with a specially designed module. It was also found that at least two weeks is required to do a meaningful survey of biological effects.

An ontology design pattern for surface water features

USGS Publications Warehouse

Sinha, Gaurav; Mark, David; Kolas, Dave; Varanka, Dalia; Romero, Boleslo E.; Feng, Chen-Chieh; Usery, E. Lynn; Liebermann, Joshua; Sorokine, Alexandre

2014-01-01

Surface water is a primary concept of human experience but concepts are captured in cultures and languages in many different ways. Still, many commonalities exist due to the physical basis of many of the properties and categories. An abstract ontology of surface water features based only on those physical properties of landscape features has the best potential for serving as a foundational domain ontology for other more context-dependent ontologies. The Surface Water ontology design pattern was developed both for domain knowledge distillation and to serve as a conceptual building-block for more complex or specialized surface water ontologies. A fundamental distinction is made in this ontology between landscape features that act as containers (e.g., stream channels, basins) and the bodies of water (e.g., rivers, lakes) that occupy those containers. Concave (container) landforms semantics are specified in a Dry module and the semantics of contained bodies of water in a Wet module. The pattern is implemented in OWL, but Description Logic axioms and a detailed explanation is provided in this paper. The OWL ontology will be an important contribution to Semantic Web vocabulary for annotating surface water feature datasets. Also provided is a discussion of why there is a need to complement the pattern with other ontologies, especially the previously developed Surface Network pattern. Finally, the practical value of the pattern in semantic querying of surface water datasets is illustrated through an annotated geospatial dataset and sample queries using the classes of the Surface Water pattern.

Toward a New Creative Scholarship of Educational Development: The Teaching and Learning Project and an Opening to Discourse

ERIC Educational Resources Information Center

Springborg, Martin; Horii, Cassandra V.

2016-01-01

This invited essay of "To Improve the Academy's" special feature on Creative Scholarship presents one example of creative scholarship in educational development as a forward to other forms and approaches in the special feature. This example, the Teaching and Learning Project, merges documentary and art photography traditions with faculty…

78 FR 36084 - Special Conditions: Cirrus Design Corporation Model SF50 Airplane; Function and Reliability...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-17

...; Special Conditions No. 23-248-SC] Special Conditions: Cirrus Design Corporation Model SF50 Airplane... granting special conditions for the Cirrus Design Corporation model SF50 airplane. We are withdrawing... Special Condition No. 23-248- SC for the Cirrus Design Corporation new model SF50 ``Vision'' Jet. The SF50...

Transmission in Optically Transparent Core Networks

NASA Astrophysics Data System (ADS)

Kilper, Dan; Jensen, Rich; Petermann, Klaus; Karasek, Miroslav

2007-03-01

Scope of Submission

• Optically transparent system design issues, transmission experiments, and field trials
• Optically transparent network architectures and topologies
• Dispersion management in reconfigurable and mesh systems
• Optically transparent network device and sub-system performance, design, characterization and control, including: amplifiers, transmitters, receivers, switches, add/drop multiplexers
• Transient and fault management
• Physical layer system control
• Monitoring and compensation to support transparency
• Wavelength routing and planning as they relate to physical layer transmission
• Hardware cost and configuration optimization for optically transparent networks

Characteristics of an airborne demonstrator for MERLIN

NASA Astrophysics Data System (ADS)

Amediek, A.; Büdenbender, C.; Ehret, G.; Fix, A.; Kiemle, C.; Quatrevalet, M.; Wirth, M.; Dieter, H.; Löhring, J.; Klein, V.

2012-12-01

After three years development time, first test measurements on DLR's (Deutsches Zentrum für Luft- und Raumfahrt) CO2 and CH4 airborne Lidar have started. It is an integrated path differential absorption (IPDA) lidar for the simultaneous measurement of CO2 and CH4 columns, designed for operation onboard the new German research aircraft HALO. In the framework of the project "CHARM-F", funded by the German ministry of education and research, the lidar was developed in collaboration with Fraunhofer Institut für Lasertechnik and Kayser-Threde. Due to the special features of the aircraft, such as the maximum flight altitude of 15 km and its long range, as well as the special design of the lidar, the system is particularly suitable to be an airborne demonstrator for the French-German MERLIN project, a spaceborne IPDA lidar sounder for methane. The layout of the receiver optics allows a large field of view, i.e. a large laser footprint on ground is possible, comparable to the size obtained by a spaceborne system. So, important features that come along with ground reflectivity issues, such as albedo variations on different spatial scales, can be taken into account in the same way and can be investigated in detail. Furthermore, two detector types are used, PIN photodiodes and APDs, each with specially adapted telescopes, to compare their respective properties. The basic design of the transmitter is identical to the one envisaged for MERLIN. Also important subsystems of the presented lidar, like wavelengths stabilization and output power monitoring, can serve as demonstrators for the satellite system. The main features of the airborne system are: Two almost identical laser systems for CH4 and CO2. Nd:YAG lasers serve as the pump sources for optical parametric oscillators (OPO), injection seeded by laser diodes, to generate the desired online and offline wavelengths in single mode operation. The online wavelength is tuned to an absorption line of the measured trace gas, the offline to a wavelength nearby showing much less absorption (DIAL principle). Pulsed operation of the laser transmitters allows proper separation of atmospheric influences (e.g. aerosol and clouds) as well as precise ranging, which is crucial for the retrieval of the column averaged gas mixing ratio. Due to double pulse operation with a short temporal separation (250 μs), the areas on ground illuminated by subsequent online and offline laser pulses show only little spatial shifts. Currently, the system is being set into operation, and in the course of this all relevant specifications are being characterized. Extensive tests and validation missions are planned for 2013.

BPELPower—A BPEL execution engine for geospatial web services

NASA Astrophysics Data System (ADS)

Yu, Genong (Eugene); Zhao, Peisheng; Di, Liping; Chen, Aijun; Deng, Meixia; Bai, Yuqi

2012-10-01

The Business Process Execution Language (BPEL) has become a popular choice for orchestrating and executing workflows in the Web environment. As one special kind of scientific workflow, geospatial Web processing workflows are data-intensive, deal with complex structures in data and geographic features, and execute automatically with limited human intervention. To enable the proper execution and coordination of geospatial workflows, a specially enhanced BPEL execution engine is required. BPELPower was designed, developed, and implemented as a generic BPEL execution engine with enhancements for executing geospatial workflows. The enhancements are especially in its capabilities in handling Geography Markup Language (GML) and standard geospatial Web services, such as the Web Processing Service (WPS) and the Web Feature Service (WFS). BPELPower has been used in several demonstrations over the decade. Two scenarios were discussed in detail to demonstrate the capabilities of BPELPower. That study showed a standard-compliant, Web-based approach for properly supporting geospatial processing, with the only enhancement at the implementation level. Pattern-based evaluation and performance improvement of the engine are discussed: BPELPower directly supports 22 workflow control patterns and 17 workflow data patterns. In the future, the engine will be enhanced with high performance parallel processing and broad Web paradigms.

Image Reconstruction is a New Frontier of Machine Learning.

PubMed

Wang, Ge; Ye, Jong Chu; Mueller, Klaus; Fessler, Jeffrey A

2018-06-01

Over past several years, machine learning, or more generally artificial intelligence, has generated overwhelming research interest and attracted unprecedented public attention. As tomographic imaging researchers, we share the excitement from our imaging perspective [item 1) in the Appendix], and organized this special issue dedicated to the theme of "Machine learning for image reconstruction." This special issue is a sister issue of the special issue published in May 2016 of this journal with the theme "Deep learning in medical imaging" [item 2) in the Appendix]. While the previous special issue targeted medical image processing/analysis, this special issue focuses on data-driven tomographic reconstruction. These two special issues are highly complementary, since image reconstruction and image analysis are two of the main pillars for medical imaging. Together we cover the whole workflow of medical imaging: from tomographic raw data/features to reconstructed images and then extracted diagnostic features/readings.

Computer-aided-diagnosis (CAD) for colposcopy

NASA Astrophysics Data System (ADS)

Lange, Holger; Ferris, Daron G.

2005-04-01

Uterine cervical cancer is the second most common cancer among women worldwide. Colposcopy is a diagnostic method, whereby a physician (colposcopist) visually inspects the lower genital tract (cervix, vulva and vagina), with special emphasis on the subjective appearance of metaplastic epithelium comprising the transformation zone on the cervix. Cervical cancer precursor lesions and invasive cancer exhibit certain distinctly abnormal morphologic features. Lesion characteristics such as margin; color or opacity; blood vessel caliber, intercapillary spacing and distribution; and contour are considered by colposcopists to derive a clinical diagnosis. Clinicians and academia have suggested and shown proof of concept that automated image analysis of cervical imagery can be used for cervical cancer screening and diagnosis, having the potential to have a direct impact on improving women"s health care and reducing associated costs. STI Medical Systems is developing a Computer-Aided-Diagnosis (CAD) system for colposcopy -- ColpoCAD. At the heart of ColpoCAD is a complex multi-sensor, multi-data and multi-feature image analysis system. A functional description is presented of the envisioned ColpoCAD system, broken down into: Modality Data Management System, Image Enhancement, Feature Extraction, Reference Database, and Diagnosis and directed Biopsies. The system design and development process of the image analysis system is outlined. The system design provides a modular and open architecture built on feature based processing. The core feature set includes the visual features used by colposcopists. This feature set can be extended to include new features introduced by new instrument technologies, like fluorescence and impedance, and any other plausible feature that can be extracted from the cervical data. Preliminary results of our research on detecting the three most important features: blood vessel structures, acetowhite regions and lesion margins are shown. As this is a new and very complex field in medical image processing, the hope is that this paper can provide a framework and basis to encourage and facilitate collaboration and discussion between industry, academia, and medical practitioners.

A second-generation constrained reaction volume shock tube

NASA Astrophysics Data System (ADS)

Campbell, M. F.; Tulgestke, A. M.; Davidson, D. F.; Hanson, R. K.

2014-05-01

We have developed a shock tube that features a sliding gate valve in order to mechanically constrain the reactive test gas mixture to an area close to the shock tube endwall, separating it from a specially formulated non-reactive buffer gas mixture. This second-generation Constrained Reaction Volume (CRV) strategy enables near-constant-pressure shock tube test conditions for reactive experiments behind reflected shocks, thereby enabling improved modeling of the reactive flow field. Here we provide details of the design and operation of the new shock tube. In addition, we detail special buffer gas tailoring procedures, analyze the buffer/test gas interactions that occur on gate valve opening, and outline the size range of fuels that can be studied using the CRV technique in this facility. Finally, we present example low-temperature ignition delay time data to illustrate the CRV shock tube's performance.

Top-quality security optical elements: from holography towards 500.000 dpi

NASA Astrophysics Data System (ADS)

Kotačka, Libor; Těthal, Tomas; Kolařík, Vladimir

2005-09-01

Invented in late 1940s, holography has played a very important role in many technical applications. While the 60s and 70s belonged to, say, a classical period of the holography and diffractive optics (optical elements, lenses, beam splitters), the last two decades have shown an enormous expansion of various mainly synthetically designed and created holographic elements. Ever since its invention, holograms have also attracted our attention, because of their true three-dimension perception of a depicted object and related optical features. These phenomena caused, the holograms have become very well and easily publicly recognized, but still very difficult to falsify. Holography based optically variable microstructures and related advanced anti-counterfeit measures are thus ones of the leading features in security elements used for the protection against falsification of valuables, documents (banknotes, visa, passports, ID cards, tax stamps, etc.), serving for the protection of interests and many others. Our talk deals with the survey of currently exploited technologies to produce several protective optical elements. A special attention will be paid to the synthetically developed special optical elements by means of the unique technology - the electron beam lithography, what is one of the world's most advanced technologies used for the protection against falsification. The computer-synthesized security elements are recorded with an incredible resolution of up to 500.000 dpi and are specially developed for the security of the most important state valuables and documents. Finally, we shall discuss some technological possibilities for its future development.

Design Principles for Rapid Prototyping Forces Sensors using 3D Printing.

PubMed

Kesner, Samuel B; Howe, Robert D

2011-07-21

Force sensors provide critical information for robot manipulators, manufacturing processes, and haptic interfaces. Commercial force sensors, however, are generally not adapted to specific system requirements, resulting in sensors with excess size, cost, and fragility. To overcome these issues, 3D printers can be used to create components for the quick and inexpensive development of force sensors. Limitations of this rapid prototyping technology, however, require specialized design principles. In this paper, we discuss techniques for rapidly developing simple force sensors, including selecting and attaching metal flexures, using inexpensive and simple displacement transducers, and 3D printing features to aid in assembly. These design methods are illustrated through the design and fabrication of a miniature force sensor for the tip of a robotic catheter system. The resulting force sensor prototype can measure forces with an accuracy of as low as 2% of the 10 N measurement range.

Design of Octupole Channel for Integrable Optics Test Accelerator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Antipov, Sergey; Carlson, Kermit; Castellotti, Riccardo

We present the design of octupole channel for Integrable Optics Test Accelerator (IOTA). IOTA is a test accelerator at Fermilab, aimed to conduct research towards high-intensity machines. One of the goals of the project is to demonstrate high nonlinear betatron tune shifts while retaining large dynamic aperture in a realistic accelerator design. At the first stage the tune shift will be attained with a special channel of octupoles, which creates a variable octupole potential over a 1.8 m length. The channel consists of 18 identical air-cooled octupole magnets. The magnets feature a simple low-cost design, while meeting the requirements onmore » maximum gradient - up to 1.4 kG/cm³, and field quality - strength of harmonics below 1%. Numerical simulations show that the channel is capable of producing a nonlinear tune shift of 0.08 without restriction of dynamic aperture of the ring.« less

Design of workshops in air quality management for senior managers in Mexico (Taller de la calidad del aire para mandos superiores)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Auberle, W.M.; Alvarez, V.M.; Leary, J.

1999-07-01

A collaborative program among agencies and professionals in Mexico and the US is designing, developing and delivering specialized workshops for Mexican officials responsible for air quality management. The initial project is development and pilot delivery (Spring 1999) of a workshop for senior officials of SEMARNAP plus selected state and municipal officials. This paper describes the process for design of professional development programs in air quality management for Mexican officials. Key issues include optimum learning styles and delivery techniques; available time of senior managers for education; need for new materials versus adaptation of existing air quality management information; and utilization ofmore » the Internet and asynchronous methods to supplement the traditional workshop format. The paper describes the results of this analysis and design features and content of the initial workshop.« less

Thermal design concept for a high resolution UV spectrometer

NASA Technical Reports Server (NTRS)

Caruso, P.; Stipandic, E.

1979-01-01

The thermal design concept described has been developed for the High Resolution UV Spectrometer/Polarimeter to be flown on the Solar Maximum Mission. Based on experience gained from a similar Orbiting Solar Observatory mission payload, it has been recognized that initial protection of the optical elements, contamination control, reduction of scattered light, tight bulk temperature, and gradient constraints are key elements that must be accommodated in any thermal control concept for this class of instrument. Salient features of the design include: (1) a telescope door providing contamination protection of an aplanatic Gregorian telescope; (2) a rastering system for the secondary mirror; (3) a unique solar heat absorbing device; (4) heat pipes and special radiators; (5) heaters for active temperature control and optics contamination protection; and (6) high precision platinum resistance thermometers. Viability of the design concept has been established by extensive thermal analysis and some subsystem testing. A summary of analytical and test results is included.

Contingency power concepts for helicopter turboshaft engine

NASA Technical Reports Server (NTRS)

Hirschkron, R.; Davis, R. H.; Goldstein, D. N.; Haynes, J. F.; Gauntner, J. W.

1984-01-01

Twin helicopter engines are often sized by power requirement of safe mission completion after the failure of one of the two engines. This study was undertaken for NASA Lewis by General Electric Co. to evaluate the merits of special design features to provide a 2-1/2 minute Contingency Power rating, permitting an engine size reduction. The merits of water injection, cooling flow modulation, throttle push and an auxiliary power plant were evaluated using military life cycle cost (LCC) and commercial helicopter direct operating cost (DOC) merit factors in a rubber engine/rubber aircraft scenario.

Software development to support sensor control of robot arc welding

NASA Technical Reports Server (NTRS)

Silas, F. R., Jr.

1986-01-01

The development of software for a Digital Equipment Corporation MINC-23 Laboratory Computer to provide functions of a workcell host computer for Space Shuttle Main Engine (SSME) robotic welding is documented. Routines were written to transfer robot programs between the MINC and an Advanced Robotic Cyro 750 welding robot. Other routines provide advanced program editing features while additional software allows communicatin with a remote computer aided design system. Access to special robot functions were provided to allow advanced control of weld seam tracking and process control for future development programs.

Description of A 2.3 kW power transformer for space applications

NASA Technical Reports Server (NTRS)

Hansen, I.

1979-01-01

The paper describes the principal features and special testing of a high-frequency high-power low-specific-weight (0.57 kg/kW) 2.3-kW electronic power transformer developed for space applications. The transformer is operated in a series resonant inverter supplying beam power to a 30-cm mercury ion thruster. High efficiency (above 98.5%) is obtained through careful detailed design. A number of unique heat removal techniques are discussed which control the winding temperature using only the available conductive cooling.

Science@SLAC—Discovering New Drugs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drell, Persis; Smith, Clyde; Bushnell, Dave

2011-10-18

SLAC scientists and private-sector drug makers describe how a public--private partnership combined with the specialized X-rays from the Stanford Synchrotron Radiation Lightsource (SSRL) enable smart drug design that eliminates the costly trial-and-error approach used by traditional drug companies. SSRL is a synchrotron lightsource laboratory used by scientists from a range of disciplines to study matter on the scale of atoms and molecules. Featured in this video are SLAC Laboratory Director Persis Drell, SSRL staff scientist Clyde Smith, and Dave Bushnell, a scientist from startup drug maker Cocrystal Discovery Inc.

VELOC - A new kind of information system

NASA Astrophysics Data System (ADS)

Dittloff, H. J.; Keuser, H.; Langer, H.

Based on the Global Positioning System (GPS), VELOC (Vehicle Location) is designed to be a vehicle information system for fleet management adaptable to various user groups, e.g., haulage and delivery companies, and service enterprises with vehicle fleets. The needs of these groups vary with respect to position accuracy, position update rate, and type of communication. The authors describe the requirements, specifications, and performance of VELOC. Special emphasis is placed on some substantial features of the VELOC center, namely the integration of DGPS, a comfortable user interface, and handling of vehicle positions on digital maps.

Science@SLAC—Discovering New Drugs

ScienceCinema

Drell, Persis; Smith, Clyde; Bushnell, Dave

2018-01-16

SLAC scientists and private-sector drug makers describe how a public--private partnership combined with the specialized X-rays from the Stanford Synchrotron Radiation Lightsource (SSRL) enable smart drug design that eliminates the costly trial-and-error approach used by traditional drug companies. SSRL is a synchrotron lightsource laboratory used by scientists from a range of disciplines to study matter on the scale of atoms and molecules. Featured in this video are SLAC Laboratory Director Persis Drell, SSRL staff scientist Clyde Smith, and Dave Bushnell, a scientist from startup drug maker Cocrystal Discovery Inc.

LARC powder prepreg system

NASA Technical Reports Server (NTRS)

Baucom, Robert M.; Marchello, Joseph M.

1990-01-01

Thermoplastic prepregs of LARC-TPI have been produced in a fluidized bed unit on spread continuous fiber tows. The powders are melted on the fibers by radiant heating to adhere the polymer to the fiber. This process produces tow prepreg uniformly without imposing severe stress on the fibers or requiring long high temperature residence times for the polymer. Unit design theory and operating correlations have been developed to provide the basis for scale up to commercial operation. Special features of the operation are the pneumatic tow spreader, fluidized bed and resin feed systems.

Technology and benefits of aircraft counter rotation propellers

NASA Technical Reports Server (NTRS)

Strack, W. C.; Knip, G.; Weisbrich, A. L.; Godston, J.; Bradley, E.

1981-01-01

Results are reported of a NASA sponsored analytical investigation into the merits of advanced counter rotation propellers for Mach 0.80 commercial transport application. Propeller and gearbox performance, acoustics, vibration characteristics, weight, cost and maintenance requirements for a variety of design parameters and special features were considered. Fuel savings in the neighborhood of 8 percent relative to single rotation configurations are feasible through swirl recovery and lighter gearboxes. This is the net gain which includes a 5 percent acoustic treatment weight penalty to offset the broader frequency spectrum noise produced by counter rotation blading.

CNN-SVM for Microvascular Morphological Type Recognition with Data Augmentation.

PubMed

Xue, Di-Xiu; Zhang, Rong; Feng, Hui; Wang, Ya-Lei

2016-01-01

This paper focuses on the problem of feature extraction and the classification of microvascular morphological types to aid esophageal cancer detection. We present a patch-based system with a hybrid SVM model with data augmentation for intraepithelial papillary capillary loop recognition. A greedy patch-generating algorithm and a specialized CNN named NBI-Net are designed to extract hierarchical features from patches. We investigate a series of data augmentation techniques to progressively improve the prediction invariance of image scaling and rotation. For classifier boosting, SVM is used as an alternative to softmax to enhance generalization ability. The effectiveness of CNN feature representation ability is discussed for a set of widely used CNN models, including AlexNet, VGG-16, and GoogLeNet. Experiments are conducted on the NBI-ME dataset. The recognition rate is up to 92.74% on the patch level with data augmentation and classifier boosting. The results show that the combined CNN-SVM model beats models of traditional features with SVM as well as the original CNN with softmax. The synthesis results indicate that our system is able to assist clinical diagnosis to a certain extent.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simkin, T.; Tilling, R.I.; Taggart, J.N.

The Earth's physiographic features overlain by its volcanoes, earthquake epicenters, and the movement of its major tectonic plates are shown in this map. This computer-generated map of the world provides a base that shows the topography of the land surface and the sea floor; the additions of color and shaded relief help to distinguish significant features. From the Volcano Reference file of the Smithsonian Institution, nearly 1,450 volcanoes active during the past 10,000 yr are plotted on the map in four categories. From the files of the National Earthquake Information Center (US Geological Survey), epicenters selected from 1,300 large eventsmore » (magnitude {>=} 7.0) from 1987 onward and from 140,000 instrumentally recorded earthquakes (magnitude {>=} 4.0) from 1960 to the present are plotted on this map according to two magnitude categories and two depth categories. This special map is intended as a teaching aid for classroom use and as a general reference for research. It is designed to show prominent global features when viewed from a distance; more detailed features are visible on closer inspection.« less

Elastin-like polypeptides: the power of design for smart cell encapsulation.

PubMed

Bandiera, Antonella

2017-01-01

Cell encapsulation technology is still a challenging issue. Innovative methodologies such as additive manufacturing, and alternative bioprocesses, such as cell therapeutic delivery, where cell encapsulation is a key tool are rapidly gaining importance for their potential in regenerative medicine. Responsive materials such as elastin-based recombinant expression products have features that are particularly attractive for cell encapsulation. They can be designed and tailored to meet desired requirements. Thus, they represent promising candidates for the development of new concept-based materials that can be employed in this field. Areas covered: An overview of the design and employment of elastin-like polypeptides for cell encapsulation is given to outline the state of the art. Special attention is paid to the design of the macromolecule employed as well as to the method of matrix formation and the biological system involved. Expert opinion: As a result of recent progress in regenerative medicine there is a compelling need for materials that provide specific properties and demonstrate defined functional features. Rationally designed materials that may adapt according to applied external stimuli and that are responsive to biological systems, such as elastin-like polypeptides, belong to this class of smart material. A run through the components described to date represents a good starting point for further advancement in this area. Employment of these components in cell encapsulation application will promote its advance toward 'smart cell encapsulation technology'.

A General-Purpose Optimization Engine for Multi-Disciplinary Design Applications

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Hopkins, Dale A.; Berke, Laszlo

1996-01-01

A general purpose optimization tool for multidisciplinary applications, which in the literature is known as COMETBOARDS, is being developed at NASA Lewis Research Center. The modular organization of COMETBOARDS includes several analyzers and state-of-the-art optimization algorithms along with their cascading strategy. The code structure allows quick integration of new analyzers and optimizers. The COMETBOARDS code reads input information from a number of data files, formulates a design as a set of multidisciplinary nonlinear programming problems, and then solves the resulting problems. COMETBOARDS can be used to solve a large problem which can be defined through multiple disciplines, each of which can be further broken down into several subproblems. Alternatively, a small portion of a large problem can be optimized in an effort to improve an existing system. Some of the other unique features of COMETBOARDS include design variable formulation, constraint formulation, subproblem coupling strategy, global scaling technique, analysis approximation, use of either sequential or parallel computational modes, and so forth. The special features and unique strengths of COMETBOARDS assist convergence and reduce the amount of CPU time used to solve the difficult optimization problems of aerospace industries. COMETBOARDS has been successfully used to solve a number of problems, including structural design of space station components, design of nozzle components of an air-breathing engine, configuration design of subsonic and supersonic aircraft, mixed flow turbofan engines, wave rotor topped engines, and so forth. This paper introduces the COMETBOARDS design tool and its versatility, which is illustrated by citing examples from structures, aircraft design, and air-breathing propulsion engine design.

A computer package for the design and eigenproblem solution of damped linear multidegree of freedom systems

NASA Technical Reports Server (NTRS)

Ahmadian, M.; Inman, D. J.

1982-01-01

Systems described by the matrix differental equation are considered. An interactive design routine is presented for positive definite mass, damping, and stiffness matrices. Designing is accomplished by adjusting the mass, damping, and stiffness matrices to obtain a desired oscillation behavior. The algorithm also features interactively modifying the physical structure of the system, obtaining the matrix structure and a number of other system properties. In case of a general system, where the M, C, and K matrices lack any special properties, a routine for the eigenproblem solution of the system is developed. The latent roots are obtained by computing the characteristic polynomial of the system and solving for its roots. The above routines are prepared in FORTRAN IV and prove to be usable for the machines with low core memory.

Impact of Hospital Information Systems on Emergency Patient Processing

PubMed Central

Rusnak, James E.

1981-01-01

The Emergency Department offers the Hospital Information System's designer some unique problems to solve in the operational areas of patient registration, order entry, charge recording, and treatment processing. In a number of instances, Hospital Information Systems implementers have encountered serious difficulties in trying to design system components to support the requirements of the Emergency Services Department's operations. Washington Hospital has developed a very effective system for Emergency Services. The system's features are designed to meet the special requirements of the department and to maximize the use of the data captured by the Hospital Information System. The system supports accurate and timely charging for services. The treatment of the patient has been dramatically improved through the use of a computerized order processing and control. The installed systems resulted in a higher quality of care and cost effective operations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mouterde, Timothée; Lehoucq, Gaëlle; Xavier, Stéphane

Nanometre-scale features with special shapes impart a broad spectrum of unique properties to the surface of insects. These properties are essential for the animal’s survival, and include the low light reflectance of moth eyes, the oil repellency of springtail carapaces and the ultra-adhesive nature of palmtree bugs. Antireflective mosquito eyes and cicada wings are also known to exhibit some antifogging and self-cleaning properties. In all cases, the combination of small feature size and optimal shape provides exceptional surface properties. In this work, we investigate the underlying antifogging mechanism in model materials designed to mimic natural systems, and explain the importancemore » of the texture’s feature size and shape. While exposure to fog strongly compromises the water-repellency of hydrophobic structures, this failure can be minimized by scaling the texture down to nanosize. Furthermore, this undesired effect even becomes non-measurable if the hydrophobic surface consists of nanocones, which generate antifogging efficiency close to unity and water departure of droplets smaller than 2 μm.« less

Antifogging abilities of model nanotextures

DOE PAGES

Mouterde, Timothée; Lehoucq, Gaëlle; Xavier, Stéphane; ...

2017-02-27

Nanometre-scale features with special shapes impart a broad spectrum of unique properties to the surface of insects. These properties are essential for the animal’s survival, and include the low light reflectance of moth eyes, the oil repellency of springtail carapaces and the ultra-adhesive nature of palmtree bugs. Antireflective mosquito eyes and cicada wings are also known to exhibit some antifogging and self-cleaning properties. In all cases, the combination of small feature size and optimal shape provides exceptional surface properties. In this work, we investigate the underlying antifogging mechanism in model materials designed to mimic natural systems, and explain the importancemore » of the texture’s feature size and shape. While exposure to fog strongly compromises the water-repellency of hydrophobic structures, this failure can be minimized by scaling the texture down to nanosize. Furthermore, this undesired effect even becomes non-measurable if the hydrophobic surface consists of nanocones, which generate antifogging efficiency close to unity and water departure of droplets smaller than 2 μm.« less

Antifogging abilities of model nanotextures

NASA Astrophysics Data System (ADS)

Mouterde, Timothée; Lehoucq, Gaëlle; Xavier, Stéphane; Checco, Antonio; Black, Charles T.; Rahman, Atikur; Midavaine, Thierry; Clanet, Christophe; Quéré, David

2017-06-01

Nanometre-scale features with special shapes impart a broad spectrum of unique properties to the surface of insects. These properties are essential for the animal’s survival, and include the low light reflectance of moth eyes, the oil repellency of springtail carapaces and the ultra-adhesive nature of palmtree bugs. Antireflective mosquito eyes and cicada wings are also known to exhibit some antifogging and self-cleaning properties. In all cases, the combination of small feature size and optimal shape provides exceptional surface properties. In this work, we investigate the underlying antifogging mechanism in model materials designed to mimic natural systems, and explain the importance of the texture’s feature size and shape. While exposure to fog strongly compromises the water-repellency of hydrophobic structures, this failure can be minimized by scaling the texture down to nanosize. This undesired effect even becomes non-measurable if the hydrophobic surface consists of nanocones, which generate antifogging efficiency close to unity and water departure of droplets smaller than 2 μm.

Evaluation of Waveform Structure Features on Time Domain Target Recognition under Cross Polarization

NASA Astrophysics Data System (ADS)

Selver, M. A.; Seçmen, M.; Zoral, E. Y.

2016-08-01

Classification of aircraft targets from scattered electromagnetic waves is a challenging application, which suffers from aspect angle dependency. In order to eliminate the adverse effects of aspect angle, various strategies were developed including the techniques that rely on extraction of several features and design of suitable classification systems to process them. Recently, a hierarchical method, which uses features that take advantage of waveform structure of the scattered signals, is introduced and shown to have effective results. However, this approach has been applied to the special cases that consider only a single planar component of electric field that cause no-cross polarization at the observation point. In this study, two small scale aircraft models, Boeing-747 and DC-10, are selected as the targets and various polarizations are used to analyse the cross-polarization effects on system performance of the aforementioned method. The results reveal the advantages and the shortcomings of using waveform structures in time-domain target identification.

Neonatal Jaundice Detection System.

PubMed

Aydın, Mustafa; Hardalaç, Fırat; Ural, Berkan; Karap, Serhat

2016-07-01

Neonatal jaundice is a common condition that occurs in newborn infants in the first week of life. Today, techniques used for detection are required blood samples and other clinical testing with special equipment. The aim of this study is creating a non-invasive system to control and to detect the jaundice periodically and helping doctors for early diagnosis. In this work, first, a patient group which is consisted from jaundiced babies and a control group which is consisted from healthy babies are prepared, then between 24 and 48 h after birth, 40 jaundiced and 40 healthy newborns are chosen. Second, advanced image processing techniques are used on the images which are taken with a standard smartphone and the color calibration card. Segmentation, pixel similarity and white balancing methods are used as image processing techniques and RGB values and pixels' important information are obtained exactly. Third, during feature extraction stage, with using colormap transformations and feature calculation, comparisons are done in RGB plane between color change values and the 8-color calibration card which is specially designed. Finally, in the bilirubin level estimation stage, kNN and SVR machine learning regressions are used on the dataset which are obtained from feature extraction. At the end of the process, when the control group is based on for comparisons, jaundice is succesfully detected for 40 jaundiced infants and the success rate is 85 %. Obtained bilirubin estimation results are consisted with bilirubin results which are obtained from the standard blood test and the compliance rate is 85 %.

Compact Deep-Space Optical Communications Transceiver

NASA Technical Reports Server (NTRS)

Roberts, W. Thomas; Charles, Jeffrey R.

2009-01-01

Deep space optical communication transceivers must be very efficient receivers and transmitters of optical communication signals. For deep space missions, communication systems require high performance well beyond the scope of mere power efficiency, demanding maximum performance in relation to the precious and limited mass, volume, and power allocated. This paper describes the opto-mechanical design of a compact, efficient, functional brassboard deep space transceiver that is capable of achieving megabyte-per-second rates at Mars ranges. The special features embodied to enhance the system operability and functionality, and to reduce the mass and volume of the system are detailed. System tests and performance characteristics are described in detail. Finally, lessons learned in the implementation of the brassboard design and suggestions for improvements appropriate for a flight prototype are covered.

Computerizing an integrated clinical and financial record system in a CMHC: a pilot project.

PubMed

Newkham, J; Bawcom, L

1981-01-01

The authors describe the three-year experience of a mid-sized community mental health center in designing and installing an automated Staff/Management Information System (S/MIS). The purpose of the project, piloted at the heart od Texas Region Mental Health Mental Retardation Center (HOTRMHMR) in Waco, Texas, was to examine the feasibility of a comprehensive data system operating at a local level which would create an effective audit trail for services and reimbursement and serve as a viable mechanism for the transmission of center data to a state system via computer tapes. Included in the discussion are agency philosophy, costs, management attitudes, the design and implementation process, and special features which evolved from the fully integrated system.

Special features of the CLUSTER antenna and radial booms design, development and verification

NASA Technical Reports Server (NTRS)

Gianfiglio, G.; Yorck, M.; Luhmann, H. J.

1995-01-01

CLUSTER is a scientific space mission to in-situ investigate the Earth's plasma environment by means of four identical spin-stabilized spacecraft. Each spacecraft is provided with a set of four rigid booms: two Antenna Booms and two Radial Booms. This paper presents a summary of the boom development and verification phases addressing the key aspects of the Radial Boom design. In particular, it concentrates on the difficulties encountered in fulfilling simultaneously the requirements of minimum torque ratio and maximum allowed shock loads at boom latching for this two degree of freedom boom. The paper also provides an overview of the analysis campaign and testing program performed to achieve sufficient confidence in the boom performance and operation.

[Design of medical equipment service management system].

PubMed

Jiang, Youhao; PengWen; Jiang, Ningfeng; Ma, Li; Kong, Lingwei; Yin, PeiHao; Sun, Cheng

2012-09-01

To develop a maintenance management system for medical equipment based on HIS. The system contains some special functions( including preventive maintenance, automatic job dispatch, performance assessment, etc.) which are very useful for confirming the medical equipment in proper conditions and promoting the working efficiency of the staff. The system provides technical support for the improvement of the maintenance management level. The system, completed the software design using C/S, B/S combination mode. The system realized clients of various sections of zero maintenance, and make the data manipulation, statistical features of equipment management department more convenient. the system connects the subsystems closer and interacts information from time to time, forming a tight network structure. This provides a basis for future hospital-wide information integration.

[Technology of cementless hip endoprosthetics].

PubMed

Ungethüm, M; Blömer, W

1987-06-01

The success achieved with non-cemented hip arthroplasty depends mainly on the stability of the fixation, the quality of the stabilizing bone being just as important as favourable biomechanical conditions. The results of the intensive research and development with respect to the particular features of a non-cemented hip endoprosthesis can be divided into the following basic categories: Biomechanical aspects with special reference to bone related to the design of the prosthesis; material characteristics, such as fatigue strength, tribology, corrosion resistance, and biocompatibility; and development of new materials and coatings to permit direct bonding of implant and bone. With regard to the stem of hip prostheses, the different design parameters of various types are examined to determine their typical design characteristics, such as bearing surface of the collar, geometry of cross section, anatomically adapted shaping, and surface of the implant forming the contact with the bone. The latter can be divided into macroprofiles and macro- and micro-porous coated surfaces. On the other hand, the methods of cementless fixation of acetabular cups can be primarily divided into conical and spherical screw fixation and pegged fixation with additional macroprofiles of porous surfaces. In a separate study of the biomechanical aspects of screwed sockets, the special importance of socket shape and thread geometry are presented with reference to primary stability and long-term fixation of prostheses.

Comparative study of high voltage bushing designs suitable for apparatus containing cryogenic helium gas

NASA Astrophysics Data System (ADS)

Rodrigo, H.; Graber, L.; Kwag, D. S.; Crook, D. G.; Trociewitz, B.

2013-10-01

The high voltage bushing forms a critical part of any termination on cables, transformers and other power system devices. Cryogenic entities such as superconducting cables or fault current limiters add more complexity to the design of the bushing. Even more complex are bushings designed for superconducting devices which are cooled by high pressure helium gas. When looking for a bushing suitable for dielectric cable tests in a helium gas cryostat no appropriate device could be found that fulfilled the criterion regarding partial discharge inception voltage level. Therefore we decided to design and manufacture a bushing in-house. In the present work we describe the dielectric tests and operational experience on three types of bushings: One was a modified commercially available ceramics feed through which we adopted for our special need. The second bushing was made of an epoxy resin, with an embedded copper squirrel cage arrangement at the flange, extending down about 30 cm into the cold end of the bushing. This feature reduced the electric field on the surface of the bushing to a negligible value. The third bushing was based on a hollow body consisting of glass fiber reinforced polymer and stainless steel filled with liquid nitrogen. The measurements showed that the dielectric quality of all three bushings exceeded the requirements for the intended purpose. The partial discharge (PD) data from these studies will be used for the design and fabrication of a cable termination for a specialized application on board a US Navy ship.

77 FR 36419 - Feasibility of Enumerating “Specially Designed” Components

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-19

... feasibility of positively identifying ``specially designed'' ``components'' on the Commerce Control List (CCL... exhaustive lists of the ``specially designed'' ``components'' referred to in certain Export Control... project involving minimizing the use of the term ``specially designed'' on the current Commerce Control...

Aggregation of p-Sulfonatocalixarene-Based Amphiphiles and Supra-Amphiphiles

PubMed Central

Basilio, Nuno; Francisco, Vitor; Garcia-Rio, Luis

2013-01-01

p-Sulfonatocalixarenes are a special class of water soluble macrocyclic molecules made of 4-hydroxybenzenesulfonate units linked by methylene bridges. One of the main features of these compounds relies on their ability to form inclusion complexes with cationic and neutral species. This feature, together with their water solubility and apparent biological compatibility, had enabled them to emerge as one the most important host receptors in supramolecular chemistry. Attachment of hydrophobic alkyl chains to these compounds leads to the formation of macrocyclic host molecules with amphiphilic properties. Like other oligomeric surfactants, these compounds present improved performance with respect to their monomeric counterparts. In addition, they hold their recognition abilities and present several structural features that depend on the size of the macrocycle and on the length of the alkyl chain, such as preorganization, flexibility and adopted conformations, which make these molecules very interesting to study structure-aggregation relationships. Moreover, the recognition abilities of p-sulfonatocalixarenes enable them to be applied in the design of amphiphiles constructed from non-covalent, rather than covalent, bonds (supramolecular amphiphiles). In this review, we summarize the developments made on the design and synthesis of p-sulfonatocalixarenes-based surfactants, the characterization of their self-assembly properties and on how their structure affects these properties. PMID:23380960

31 CFR 594.310 - Specially designated global terrorist; SDGT.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Specially designated global terrorist... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS REGULATIONS General Definitions § 594.310 Specially designated global terrorist; SDGT. The term specially...

31 CFR 594.310 - Specially designated global terrorist; SDGT.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Specially designated global terrorist... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS REGULATIONS General Definitions § 594.310 Specially designated global terrorist; SDGT. The term specially...

31 CFR 594.310 - Specially designated global terrorist; SDGT.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Specially designated global terrorist... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS REGULATIONS General Definitions § 594.310 Specially designated global terrorist; SDGT. The term specially...

31 CFR 594.310 - Specially designated global terrorist; SDGT.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Specially designated global terrorist... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS REGULATIONS General Definitions § 594.310 Specially designated global terrorist; SDGT. The term specially...

31 CFR 594.310 - Specially designated global terrorist; SDGT.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Specially designated global terrorist... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS REGULATIONS General Definitions § 594.310 Specially designated global terrorist; SDGT. The term specially...

mapview - Interactive viewing of spatial data in R

NASA Astrophysics Data System (ADS)

Appelhans, Tim; Detsch, Florian; Reudenbach, Cristoph; Woellauer, Stefan

2016-04-01

In this talk we would like to introduce mapview, an R package designed to aid researchers during their work-flow of spatial data analysis. The package was initially developed within the framework of the DFG funded research group "KiLi - Kilimanjaro ecosystems under global change: Linking biodiversity, biotic interactions and biogeochemical ecosystem processes" but has quickly developed into a general purpose spatial data viewer. mapview provides some powerful tools for interactive visualization of standard spatial data in R. It has support for all Spatial*(DataFrame) objects as well as all Raster* objects. It is designed so that one function call - mapview(x) - is all you need to view the data interactively. Adding layers to existing views is very easy and we have taken great care in providing suitable defaults for features such as background maps or coloring but things can be customized flexibly (and permanently) to suit different needs. Even though mapview is for most parts based on the leaflet package, it is far more than just a convenience wrapper around leaflet functionality. mapview provides additional features for handling big data sets (up to several million points) as well as some specialized functionality to view and compare rasters of any size with arbitrary coordinate reference systems. Given that mapview is merely a bridge between R and the underlying leaflet.js javascript library, mapview can be used to produce web-maps by simply providing the path to a designated folder. This talk will be a live demonstration of some of the key features of mapview.

Health professions: the origin of species.

PubMed

Hofoss, D

1986-01-01

Specialization is an important feature of post-World War II health sector development. Its value is indisputable. On the other hand, unchecked specialization also brings problems, notably of cost escalation and service profile twisting. To exploit the potentials of highly specialized medicine without neglecting the everyday problems that constitute the bulk of medicine, one needs a carefully constructed policy. To design such a policy, one needs, among other things, to understand the whys and hows of specialization. This reports discusses three different approaches to the understanding of the process of specialization: the sociological (S is a reflection of the selfish interests of the professions), the medical (S is the natural response to scientific and technological progress), and the economic (S is a result of increased market demand). Much is to be said in favour of the sociological explanation. Occupational groups do pursue interests of their own, centering on the construction and defence of job monopolies. The histories of the professions readily lend themselves to this kind of interpretation, and its gives, beyond doubt, valuable insight into the ways in which occupational groups relate to each other, to clients and to the surrounding society. This report, however, argues that the sociology of the professions is largely concerned with phenomena secondary to the process of specialization. It explains the behaviour of occupational groups, once they have been established. It does not, however, explain why they came into being in the first place. For that purpose, the perspective of medicine and, in particular, that of economy, may be more suitable. I support this position by data on the specialization of the health service system of Norway.

Dynamic properties of ionospheric plasma turbulence driven by high-power high-frequency radiowaves

NASA Astrophysics Data System (ADS)

Grach, S. M.; Sergeev, E. N.; Mishin, E. V.; Shindin, A. V.

2016-11-01

A review is given of the current state-of-the-art of experimental studies and the theoretical understanding of nonlinear phenomena that occur in the ionospheric F-layer irradiated by high-power high-frequency ground-based transmitters. The main focus is on the dynamic features of high-frequency turbulence (plasma waves) and low-frequency turbulence (density irregularities of various scales) that have been studied in experiments at the Sura and HAARP heating facilities operated in temporal and frequency regimes specially designed with consideration of the characteristic properties of nonlinear processes in the perturbed ionosphere using modern radio receivers and optical instruments. Experimental results are compared with theoretical turbulence models for a magnetized collisional plasma in a high-frequency electromagnetic field, allowing the identification of the processes responsible for the observed features of artificial ionospheric turbulence.

C++, objected-oriented programming, and astronomical data models

NASA Technical Reports Server (NTRS)

Farris, A.

1992-01-01

Contemporary astronomy is characterized by increasingly complex instruments and observational techniques, higher data collection rates, and large data archives, placing severe stress on software analysis systems. The object-oriented paradigm represents a significant new approach to software design and implementation that holds great promise for dealing with this increased complexity. The basic concepts of this approach will be characterized in contrast to more traditional procedure-oriented approaches. The fundamental features of objected-oriented programming will be discussed from a C++ programming language perspective, using examples familiar to astronomers. This discussion will focus on objects, classes and their relevance to the data type system; the principle of information hiding; and the use of inheritance to implement generalization/specialization relationships. Drawing on the object-oriented approach, features of a new database model to support astronomical data analysis will be presented.

Method for matching customer and manufacturer positions for metal product parameters standardization

NASA Astrophysics Data System (ADS)

Polyakova, Marina; Rubin, Gennadij; Danilova, Yulija

2018-04-01

Decision making is the main stage of regulation the relations between customer and manufacturer during the design the demands of norms in standards. It is necessary to match the positions of the negotiating sides in order to gain the consensus. In order to take into consideration the differences of customer and manufacturer estimation of the object under standardization process it is obvious to use special methods of analysis. It is proposed to establish relationships between product properties and its functions using functional-target analysis. The special feature of this type of functional analysis is the consideration of the research object functions and properties. It is shown on the example of hexagonal head crew the possibility to establish links between its functions and properties. Such approach allows obtaining a quantitative assessment of the closeness the positions of customer and manufacturer at decision making during the standard norms establishment.

DEVA: An extensible ontology-based annotation model for visual document collections

NASA Astrophysics Data System (ADS)

Jelmini, Carlo; Marchand-Maillet, Stephane

2003-01-01

The description of visual documents is a fundamental aspect of any efficient information management system, but the process of manually annotating large collections of documents is tedious and far from being perfect. The need for a generic and extensible annotation model therefore arises. In this paper, we present DEVA, an open, generic and expressive multimedia annotation framework. DEVA is an extension of the Dublin Core specification. The model can represent the semantic content of any visual document. It is described in the ontology language DAML+OIL and can easily be extended with external specialized ontologies, adapting the vocabulary to the given application domain. In parallel, we present the Magritte annotation tool, which is an early prototype that validates the DEVA features. Magritte allows to manually annotating image collections. It is designed with a modular and extensible architecture, which enables the user to dynamically adapt the user interface to specialized ontologies merged into DEVA.

14 CFR Special Federal Aviation... - 5-Flightcrew Compartment Access and Door Designs

Code of Federal Regulations, 2010 CFR

2010-01-01

... Designs Federal Special Federal Aviation Regulation 92 Aeronautics and Space FEDERAL AVIATION... No. 92-5 Special Federal Aviation Regulation 92-5—Flightcrew Compartment Access and Door Designs 1. Applicability. This Special Federal Aviation Regulation (SFAR) applies to all operators that hold an air carrier...

14 CFR Special Federal Aviation... - 5-Flightcrew Compartment Access and Door Designs

Code of Federal Regulations, 2011 CFR

2011-01-01

... Designs Federal Special Federal Aviation Regulation 92 Aeronautics and Space FEDERAL AVIATION... No. 92-5 Special Federal Aviation Regulation 92-5—Flightcrew Compartment Access and Door Designs 1. Applicability. This Special Federal Aviation Regulation (SFAR) applies to all operators that hold an air carrier...

Guide to Special Information in Scientific and Engineering Journals.

ERIC Educational Resources Information Center

Harris, Mary Elizabeth

This annotated bibliography lists 203 special features or special issues of science and technology periodicals with emphasis on compilations of information that appear in periodicals on a regular basis. Subjects covered in the guide include aeronautics, air-conditioning and refrigeration engineering, astronomy, automobiles, biology, botany,…

Meteoroid and Debris Impact Features Documented on the Long Duration Exposure Facility: A Preliminary Report

NASA Technical Reports Server (NTRS)

See, T. (Compiler); Allbrooks, M. (Compiler); Atkinson, D. (Compiler); Simon, C. (Compiler); Zolensky, M. (Compiler)

1990-01-01

The Long Duration Exposure Facility (LDEF) was host to several individual experiments designed to characterize aspects of the meteoroid and space-debris environment in low-Earth orbit. It was realized from the very start, however, that the most complete way to accomplish this goal was to exploit the meteoroid and debris record of the entire LDEF. The Meteoroid and Debris Special Investigation Group (M&D SIG) was organized to achieve this end. Two dominant goals of the M&D SIG are the documentation of the impact record of the entire LDEF, and the dissemination of this information to all interested workers. As a major step towards the accomplishment of these goals, we have prepared this publication describing the M&D SIG observations of impact features made during LDEF deintegration activities at KSC in the spring of 1990. It is hoped that this report will serve as a useful guide for spacecraft designers as well as for meteoroid and space-debris workers, and that it will spur further work on the LDEF impact-laden surfaces collected by the M&D SIG and now available for allocation to qualified investigators. An important aim is to present all data and descriptions of impact features in a form which, though terse, remains comprehensible to the wider community. There is a deliberate minimum of interpretations. Thus, this catalog is intended to serve as a guide to the impact features found on LDEF and is not intended to stand as a definitive interpretive work.

Can We Build Inclusion?

PubMed

Kirkeby, Inge Mette; Grangaard, Sidse

2016-01-01

Inclusion of children with special needs in kindergartens and preschools may be approached from different angles. This paper raises the question of whether the physical framework of kindergartens makes any difference for daily life at the kindergarten at all, and whether it can support inclusion of some children with special needs. Hence the title - can we build inclusion? In the literature of Universal Design, accommodation and design features seldom reflect the less visible disabilities. The paper is based on a research project initiated to investigate how more or less space influences daily pedagogical practice in general. Twelve interviews were conducted with experienced teachers from twelve different kindergartens with different amounts of space, varying from a ratio of 2.1 m² play area per child to 5.5 m². The results indicated that, for a group of children with special needs in particular, the amount of space is crucial. This group consisted of children who were socially very extrovert, and who maybe were noisy, easily provoked, and quick to get involved in arguments with other children. Alternatively, children in the group were very restrained and withdrawn in social interaction. Based on the answers in the interviews, we found support for answering the question in the title in the affirmative; we can build inclusion! This is because the teachers' experience indicated that, if there was sufficient space per child, there were fewer conflicts and the children managed to stay in the same activity for a much longer period. Sufficient space made it possible to divide the children into smaller groups, and use any secluded space. Therefore, it was much easier for other children to include some children with special needs. Accordingly, we can say that, sufficient space per child and an adequate layout and furnishing of the kindergarten is an advantage for all children. This is a clear example of Universal Design in which architectural solutions that are good for one specific group are also beneficial for all children.

77 FR 36409 - ``Specially Designed'' Definition

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-19

... Regulations (ITAR). The term ``specially designed'' is used widely in the Commerce Control List (CCL) and...) controls ``[c]omponents, parts, accessories, attachments and associated equipment specifically designed or... and, in order to avoid a definitional loop, do not use ``specially designed'' as a control criterion...

Special Features of Using Secondary Materials in the Interior Design of Public Dining Establishments

NASA Astrophysics Data System (ADS)

Kuznetsova, Irina; Hapchuk, Olena; Lukinov, Vitaly

2017-10-01

This article analyses the latest publications studying the use and practical application of secondary resources as raw materials in design. This analysis is based on the list of secondary resources and their applications in interior decoration. In particular, the interiors of public catering enterprises were analysed. Restaurants with different functional purposes that were classified into several categories with specific peculiarities of interior design were identified. This article presents and describes different types of public catering enterprises based on those categories. The interior design of a public catering enterprise is regarded as a considerably complex system. Different types of secondary materials were reviewed to identify the most frequently used materials for interior space design. This article describes the main peculiarities of the use of secondary materials and presents examples of their practical application. The function of secondary materials in the interior design of public catering enterprises were detected and reviewed. On the basis of the analysis, several directions for the practical application of our results in the field of public catering enterprise design were suggested.

Artistic and Industrial Institutions in Russian Education Structure in First Quarter of XXth Century

NASA Astrophysics Data System (ADS)

Chernyh, D. G.

2017-11-01

The article tells about the formation of Russian design education in the XXth century. It focuses on the peculiar features and causes of its insufficient effectiveness in the historical context. It studies the dynamics of changes in the priorities related to the artistic and industrial education in Russia and the connection of these processes with socio-political transformations. The article identifies the role of constructivist artists in the formation and approbation of advanced design-engineering techniques. It emphasizes the interdisciplinary essence of the profession of a designer as a special kind of design activities, its organizing, consolidating and progressive origin in the sphere of industrial production and carrying out interdisciplinary studies. It discloses the essence of a new “engineer-artist” profession. It briefly describes the influence of the fundamental principle of design - projectivity, on engineering and design disciplines when the interaction of an artist, an engineer and an architect is achieved on the basis of design, arrangement and inventive art as well as production organization where science and technology form the basis for creative work.

Educational Criticism as a New Specialization

ERIC Educational Resources Information Center

Leonardo, Zeus

2016-01-01

This article argues that a new specialization in education has been developing: educational criticism. It takes as its model the existing fields of criticism found in other disciplines, mainly in literature, or literary criticism. The article outlines the central features of educational criticism as a new specialization, guided by a program of…

Bases of the scientific conception of the “green frame” designing in urban areas for providing ecological safety of the urban environment

NASA Astrophysics Data System (ADS)

Bespalov, V.; Kotlyarova, E.

2017-10-01

In modern conditions of a stable urban areas development special place is occupied by the problem of ecological security of built-up areas, including residential, recreational, industrial areas and objects of transport and engineering infrastructure. The main results of the study are to establish the basis of formation of the concept of choice of energy-efficient technologies and tools of forming an ecologically efficient “green frame” of urban areas on the basis of a single integrated scientific concept. Analysis allowed us to divide the measures for improvement into the following main groups: organizational and planning, engineering and technical and special engineering and environmental. The significance of these results for the construction industry, including transport infrastructure, is to increase the level of environmental safety in the construction and reconstruction of urban areas due to the organization of their improvement on the basis suggested by the authors scientific approach. Its basis is integrated accounting of the natural and climatic features of the landscaping territory, the types and level of environmental impact of negative anthropogenic factors, the features of architectural and planning solutions of the existing or projected on the studied area, the structure and types of green spaces and their functional ecological properties.

43 CFR 423.60 - How special use areas are designated.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false How special use areas are designated. 423... Use Areas § 423.60 How special use areas are designated. (a) After making a determination under paragraph (b) of this section, an authorized official may: (1) Establish special use areas within...

43 CFR 423.60 - How special use areas are designated.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false How special use areas are designated. 423... Use Areas § 423.60 How special use areas are designated. (a) After making a determination under paragraph (b) of this section, an authorized official may: (1) Establish special use areas within...

Special Features of Induction Annealing of Friction Stir Welded Joints of Medium-Alloy Steels

NASA Astrophysics Data System (ADS)

Priymak, E. Yu.; Stepanchukova, A. V.; Bashirova, E. V.; Fot, A. P.; Firsova, N. V.

2018-01-01

Welded joints of medium-alloy steels XJY750 and 40KhN2MA are studied in the initial condition and after different variants of annealing. Special features of the phase transformations occurring in the welded steels are determined. Optimum modes of annealing are recommended for the studied welded joints of drill pipes, which provide a high level of mechanical properties including the case of impact loading.

Special object extraction from medieval books using superpixels and bag-of-features

NASA Astrophysics Data System (ADS)

Yang, Ying; Rushmeier, Holly

2017-01-01

We propose a method to extract special objects in images of medieval books, which generally represent, for example, figures and capital letters. Instead of working on the single-pixel level, we consider superpixels as the basic classification units for improved time efficiency. More specifically, we classify superpixels into different categories/objects by using a bag-of-features approach, where a superpixel category classifier is trained with the local features of the superpixels of the training images. With the trained classifier, we are able to assign the category labels to the superpixels of a historical document image under test. Finally, special objects can easily be identified and extracted after analyzing the categorization results. Experimental results demonstrate that, as compared to the state-of-the-art algorithms, our method provides comparable performance for some historical books but greatly outperforms them in terms of generality and computational time.

Design Parameters and Objectives of a High-­Resolution X-­ray Imaging Crystal Spectrometer for the Large Helical Device (LHD)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bitter, M; Gates, D; Neilson, H

A high-resolution X-ray imaging crystal spectrometer, whose instrumental concept was thoroughly tested on NSTX and Alcator C-Mod, is presently being designed for LHD. The instrument will record spatially resolved spectra of helium-like Ar16+ and provide ion temperature profiles with spatial and temporal resolutions of 1 cm and > 10 ms which are obtained by a tomographic inversion of the spectral data, using the stellarator equilibrium reconstruction codes, STELLOPT and PIES. Since the spectrometer will be equipped with radiation hardened, high count rate, PILATUS detectors,, it is expected to be operational for all experimental conditions on LHD, which include plasmas ofmore » high density and plasmas with auxiliary RF and neutral beam heating. The special design features required by the magnetic field structure at LHD will be described.« less

Rotorcraft contingency power study

NASA Technical Reports Server (NTRS)

Hirschkron, R.; Haynes, J. F.; Goldstein, D. N.; Davis, R. H.

1984-01-01

Twin helicopter engines are often sized by the power requirement of a safe mission completion after the failure of one of the two engines. This study was undertaken for NASA Lewis by General Electric Co. to evaluate the merits of special design features to provide a 2-1/2 Contingency Power rating, permitting an engine size reduction. The merits of water injection, turbine cooling airflow modulation, throttle push, and a propellant auxiliary power plant were evaluated using military Life Cycle Cost (LCC) and commercial helicopter Direct Operating Cost (DOC) merit factors in a rubber engine and a rubber aircraft scenario.

Improved Evolutionary Hybrids for Flexible Ligand Docking in Autodock

DOE Office of Scientific and Technical Information (OSTI.GOV)

Belew, R.K.; Hart, W.E.; Morris, G.M.

1999-01-27

In this paper we evaluate the design of the hybrid evolutionary algorithms (EAs) that are currently used to perform flexible ligand binding in the Autodock docking software. Hybrid EAs incorporate specialized operators that exploit domain-specific features to accelerate an EA's search. We consider hybrid EAs that use an integrated local search operator to reline individuals within each iteration of the search. We evaluate several factors that impact the efficacy of a hybrid EA, and we propose new hybrid EAs that provide more robust convergence to low-energy docking configurations than the methods currently available in Autodock.

PULSION® HP: Tunable, High Productivity Plasma Doping

NASA Astrophysics Data System (ADS)

Felch, S. B.; Torregrosa, F.; Etienne, H.; Spiegel, Y.; Roux, L.; Turnbaugh, D.

2011-01-01

Plasma doping has been explored for many implant applications for over two decades and is now being used in semiconductor manufacturing for two applications: DRAM polysilicon counter-doping and contact doping. The PULSION HP is a new plasma doping tool developed by Ion Beam Services for high-volume production that enables customer control of the dominant mechanism—deposition, implant, or etch. The key features of this tool are a proprietary, remote RF plasma source that enables a high density plasma with low chamber pressure, resulting in a wide process space, and special chamber and wafer electrode designs that optimize doping uniformity.

Logistics support of the Japanese Experiment Module by the H-II rocket

NASA Astrophysics Data System (ADS)

Shibato, Yoji; Eto, Takao; Fukushima, Yukio; Takatsuka, Hitoshi

1988-10-01

This paper describes salient design features of the Japanese Experiment Module (JEM), which will be attached to the Space Station. Special attention is given to the logistic support of the JEM (which is planned to become operational in 1990s) by the HOPE orbiter, which will be used for the resupply and the retrieval of the JEM, and the H-II rocket, which will be used to launch the HOPE. The concepts of HOPE and the H-II rocket are discussed together with the estimated logistics requirements of this system. Configuration diagrams are included.

The continuous reinvention of diffractive optics

NASA Astrophysics Data System (ADS)

Kress, Bernard C.

2004-02-01

We show in this paper how the field of diffractive optics has moved during these past twenty years from academic research to main stream industry and consumer electronics. We analyze the main driving forces, the various enabling technologies and techniques for both design, fabrication and mass production of diffractive optics, and the successive markets in which this technology has been able to provide economically viable solutions to specific industrials needs. More specifically, we will see how niche applications making use of special features of diffractive optics seem to survive the applications involving the same diffractives, issued from the successive main technology driven investment bubbles.

Report from Orroral

NASA Technical Reports Server (NTRS)

Luck, J. MCK.; Greene, B. A.

1986-01-01

The National Mapping (Natmap) laser ranging system (NLRS) at Orroral, Australia, designed for satellite and lunar ranging is described. The system is well connected to Doppler, VLBI, and astrometric sites located nearby (the 65-m antenna at Tidbinbilla DSCC 42/43, the Mount Stromlo Photographic Zenith Tube, and the old SAO laser cite) and is now producing results from Lageos and the moon. The operational features of the system's telescope are described together with the principal operating characteristics of the satellite and the lunar ranging. Special consideration is given to the system's errors. The Orroral site is being considered as a base site for GPS programs.

Construction of In-house Databases in a Corporation

NASA Astrophysics Data System (ADS)

Sano, Hikomaro

This report outlines “Repoir” (Report information retrieval) system of Toyota Central R & D Laboratories, Inc. as an example of in-house information retrieval system. The online system was designed to process in-house technical reports with the aid of a mainframe computer and has been in operation since 1979. Its features are multiple use of the information for technical and managerial purposes and simplicity in indexing and data input. The total number of descriptors, specially selected for the system, was minimized for ease of indexing. The report also describes the input items, processing flow and typical outputs in kanji letters.

Survey of ultraviolet shuttle glow

NASA Technical Reports Server (NTRS)

Spear, K. A.; Uckler, G. J.; Tobiska, K.

1985-01-01

The University of Colorado Get Away Special (GAS) project utilizes the efforts of its students to place experiments on the shuttle. The objective of one experiment, the shuttle glow study, is to conduct a general survey of emissions in the ultraviolet near vehicle surfaces. An approximate wavelength range of 1900 to 3000 A will be scanned to observe predominant features. Special emphasis will be placed on studying the band structure of NO near 2000 A and the Mg+ line at 2800 A. The spectrometer, of Ebert-Faste 1/8-meter design, will perform the experiment during spacecraft night. It will be oriented such that the optical axis points to the cargo bay zenith. In order to direct the field-of-view of the instrument onto the shuttle vertical stabilizer (tail), a mirror assembly is employed. The mirror system has been designed to rotate through 7.5 degrees of arc using 10 positions resulting in a spatial resolution of 30 x 3 cm, with the larger dimension corresponding to the horizontal direction. Such a configuration can be attained from the forwardmost position in the cargo bay. Each spatial position will be subjected to a full spectral scan with a resolution on the order of 10 A.

Functional Architecture of the Retina: Development and Disease

PubMed Central

Hoon, Mrinalini; Okawa, Haruhisa; Santina, Luca Della; Wong, Rachel O.L.

2014-01-01

Structure and function are highly correlated in the vertebrate retina, a sensory tissue that is organized into cell layers with microcircuits working in parallel and together to encode visual information. All vertebrate retinas share a fundamental plan, comprising five major neuronal cell classes with cell body distributions and connectivity arranged in stereotypic patterns. Conserved features in retinal design have enabled detailed analysis and comparisons of structure, connectivity and function across species. Each species, however, can adopt structural and/or functional retinal specializations, implementing variations to the basic design in order to satisfy unique requirements in visual function. Recent advances in molecular tools, imaging and electrophysiological approaches have greatly facilitated identification of the cellular and molecular mechanisms that establish the fundamental organization of the retina and the specializations of its microcircuits during development. Here, we review advances in our understanding of how these mechanisms act to shape structure and function at the single cell level, to coordinate the assembly of cell populations, and to define their specific circuitry. We also highlight how structure is rearranged and function is disrupted in disease, and discuss current approaches to re-establish the intricate functional architecture of the retina. PMID:24984227

Functional architecture of the retina: development and disease.

PubMed

Hoon, Mrinalini; Okawa, Haruhisa; Della Santina, Luca; Wong, Rachel O L

2014-09-01

Structure and function are highly correlated in the vertebrate retina, a sensory tissue that is organized into cell layers with microcircuits working in parallel and together to encode visual information. All vertebrate retinas share a fundamental plan, comprising five major neuronal cell classes with cell body distributions and connectivity arranged in stereotypic patterns. Conserved features in retinal design have enabled detailed analysis and comparisons of structure, connectivity and function across species. Each species, however, can adopt structural and/or functional retinal specializations, implementing variations to the basic design in order to satisfy unique requirements in visual function. Recent advances in molecular tools, imaging and electrophysiological approaches have greatly facilitated identification of the cellular and molecular mechanisms that establish the fundamental organization of the retina and the specializations of its microcircuits during development. Here, we review advances in our understanding of how these mechanisms act to shape structure and function at the single cell level, to coordinate the assembly of cell populations, and to define their specific circuitry. We also highlight how structure is rearranged and function is disrupted in disease, and discuss current approaches to re-establish the intricate functional architecture of the retina. Copyright © 2014 Elsevier Ltd. All rights reserved.

Identification and interpretation of patterns in rocket engine data: Artificial intelligence and neural network approaches

NASA Technical Reports Server (NTRS)

Ali, Moonis; Whitehead, Bruce; Gupta, Uday K.; Ferber, Harry

1989-01-01

This paper describes an expert system which is designed to perform automatic data analysis, identify anomalous events, and determine the characteristic features of these events. We have employed both artificial intelligence and neural net approaches in the design of this expert system. The artificial intelligence approach is useful because it provides (1) the use of human experts' knowledge of sensor behavior and faulty engine conditions in interpreting data; (2) the use of engine design knowledge and physical sensor locations in establishing relationships among the events of multiple sensors; (3) the use of stored analysis of past data of faulty engine conditions; and (4) the use of knowledge-based reasoning in distinguishing sensor failure from actual faults. The neural network approach appears promising because neural nets (1) can be trained on extremely noisy data and produce classifications which are more robust under noisy conditions than other classification techniques; (2) avoid the necessity of noise removal by digital filtering and therefore avoid the need to make assumptions about frequency bands or other signal characteristics of anomalous behavior; (3) can, in effect, generate their own feature detectors based on the characteristics of the sensor data used in training; and (4) are inherently parallel and therefore are potentially implementable in special-purpose parallel hardware.

22 CFR 120.41 - Specially designed.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., integration design, layouts. Note 3 to paragraph (b)(3): Commodities in “production” that are subsequently... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Specially designed. 120.41 Section 120.41... § 120.41 Specially designed. (a) Except for commodities or software described in paragraph (b) of this...

Efficient graphite ring heater suitable for diamond-anvil cells to 1300 K

DOE Office of Scientific and Technical Information (OSTI.GOV)

Du Zhixue; Amulele, George; Lee, Kanani K. M.

In order to generate homogeneous high temperatures at high pressures, a ring-shaped graphite heater has been developed to resistively heat diamond-anvil cell (DAC) samples up to 1300 K. By putting the heater in direct contact with the diamond anvils, this graphite heater design features the following advantages: (1) efficient heating: sample can be heated to 1300 K while the DAC body temperature remains less than 800 K, eliminating the requirement of a special alloy for the DAC; (2) compact design: the sample can be analyzed with in situ measurements, e.g., x-ray, optical, and electrical probes are possible. In particular, themore » side access of the heater allows for radial x-ray diffraction (XRD) measurements in addition to traditional axial XRD.« less

Innovations for Evaluation Research: Multiform Protocols, Visual Analog Scaling, and the Retrospective Pretest-Posttest Design.

PubMed

Chang, Rong; Little, Todd D

2018-06-01

In this article, we review three innovative methods: multiform protocols, visual analog scaling, and the retrospective pretest-posttest design that can be used in evaluation research. These three techniques have been proposed for decades, but unfortunately, they are still not utilized readily in evaluation research. Our goal is to familiarize researchers with these underutilized research techniques that could reduce personnel effort and costs for data collection while producing better inferences for a study. We begin by discussing their applications and special unique features. We then discuss each technique's strengths and limitations and offer practical tips on how to better implement these methods in evaluation research. We then showcase two recent empirical studies that implement these methods in real-world evaluation research applications.

Two-stage high frequency pulse tube cooler for refrigeration at 25 K

NASA Astrophysics Data System (ADS)

Dietrich, M.; Thummes, G.

2010-04-01

A two-stage Stirling-type U-shape pulse tube cryocooler driven by a 10 kW-class linear compressor was designed, built and tested. A special feature of the cold head is the absence of a heat exchanger at the cold end of the first-stage, since the intended application requires no cooling power at this intermediate temperature. Simulations where done using SAGE-software to find optimum operating conditions and cold head geometry. Flow-impedance matching was required to connect the compressor designed for 60 Hz operation to the 40 Hz cold head. A cooling power of 12.9 W at 25 K with an electrical input power of 4.6 kW has been achieved up to now. The lowest temperature reached is 13.7 K.

Evolving science of marine reserves: New developments and emerging research frontiers

PubMed Central

Gaines, Steven D.; Lester, Sarah E.; Grorud-Colvert, Kirsten; Costello, Christopher; Pollnac, Richard

2010-01-01

The field of marine reserve science has matured greatly over the last decade, moving beyond studies of single reserves and beyond perspectives from single disciplines. This Special Feature exemplifies recent advances in marine reserve research, showing insights gained from synthetic studies of reserve networks, long-term changes within reserves, integration of social and ecological science research, and balance between reserve design for conservation as well as fishery and other commercial objectives. This rich body of research helps to inform conservation planning for marine ecosystems but also poses new challenges for further study, including how to best design integrated fisheries management and conservation systems, how to effectively evaluate the performance of entire reserve networks, and how to examine the complex coupling between ecological and socioeconomic responses to reserve networks. PMID:20978212

Heat transfer technology for internal passages of air-cooled blades for heavy-duty gas turbines.

PubMed

Weigand, B; Semmler, K; von Wolfersdorf, J

2001-05-01

The present review paper, although far from being complete, aims to give an overview about the present state of the art in the field of heat transfer technology for internal cooling of gas turbine blades. After showing some typical modern cooled blades, the different methods to enhance heat transfer in the internal passages of air-cooled blades are discussed. The complicated flows occurring in bends are described in detail, because of their increasing importance for modern cooling designs. A short review about testing of cooling design elements is given, showing the interaction of the different cooling features as well. The special focus of the present review has been put on the cooling of blades for heavy-duty gas turbines, which show several differences compared to aero-engine blades.

EOS: A project to investigate the design and construction of real-time distributed Embedded Operating Systems

NASA Technical Reports Server (NTRS)

Campbell, R. H.; Essick, Ray B.; Johnston, Gary; Kenny, Kevin; Russo, Vince

1987-01-01

Project EOS is studying the problems of building adaptable real-time embedded operating systems for the scientific missions of NASA. Choices (A Class Hierarchical Open Interface for Custom Embedded Systems) is an operating system designed and built by Project EOS to address the following specific issues: the software architecture for adaptable embedded parallel operating systems, the achievement of high-performance and real-time operation, the simplification of interprocess communications, the isolation of operating system mechanisms from one another, and the separation of mechanisms from policy decisions. Choices is written in C++ and runs on a ten processor Encore Multimax. The system is intended for use in constructing specialized computer applications and research on advanced operating system features including fault tolerance and parallelism.

AC losses and stability on large cable-in-conduit superconductors

NASA Astrophysics Data System (ADS)

Bruzzone, Pierluigi

1998-12-01

The cable-in-conduit superconductors are preferred for applications where the AC losses and stability are a major concern, e.g., fusion magnets and SMES. A review of coupling currents loss results for both NbTi and Nb 3Sn cable-in-conduit conductors (CICC) is presented and the AC loss relevant features are listed, with special emphasis for the role of the interstrand resistance and strand coating. The transient stability approach for CICCs is discussed and the analytical models are quoted as well as the relevant experimental database. The likely spectrum of transient disturbance in CICC is reviewed and the need to account for interstrand current sharing in the design is outlined. Eventually a practical criterion for the interstrand resistance is proposed to link the stability and AC loss design.

PtyNAMi: ptychographic nano-analytical microscope at PETRA III: interferometrically tracking positions for 3D x-ray scanning microscopy using a ball-lens retroreflector

NASA Astrophysics Data System (ADS)

Schroer, Christian G.; Seyrich, Martin; Kahnt, Maik; Botta, Stephan; Döhrmann, Ralph; Falkenberg, Gerald; Garrevoet, Jan; Lyubomirskiy, Mikhail; Scholz, Maria; Schropp, Andreas; Wittwer, Felix

2017-09-01

In recent years, ptychography has revolutionized x-ray microscopy in that it is able to overcome the diffraction limit of x-ray optics, pushing the spatial resolution limit down to a few nanometers. However, due to the weak interaction of x rays with matter, the detection of small features inside a sample requires a high coherent fluence on the sample, a high degree of mechanical stability, and a low background signal from the x-ray microscope. The x-ray scanning microscope PtyNAMi at PETRA III is designed for high-spatial-resolution 3D imaging with high sensitivity. The design concept is presented with a special focus on real-time metrology of the sample position during tomographic scanning microscopy.

A front-end read out chip for the OPERA scintillator tracker

NASA Astrophysics Data System (ADS)

Lucotte, A.; Bondil, S.; Borer, K.; Campagne, J. E.; Cazes, A.; Hess, M.; de La Taille, C.; Martin-Chassard, G.; Raux, L.; Repellin, J. P.

2004-04-01

Multi-anode photomultipliers H7546 are used to readout signal from the OPERA Scintillator Tracker (CERN/SPSC 2000-028, SPSC/P318, LNGSP 25/2000; CERN/SPSC 2001-025, SPSC/M668, LNGS-EXP30/2001). A 32-channel front-end Read Out Chip prototype accommodating the H7546 has been designed at LAL. This device features a low-noise, variable gain preamplifier to correct for multi-anode non-uniformity, an auto-trigger capability 100% efficient at a 0.3 photo-electron, and a charge measurement extending over a large dynamic range [0-100] photo-electrons. In this article we describe the ASIC architecture that is being implemented for the Target Tracker in OPERA, with a special emphasis put on the designs and the measured performance.

Catatonia in Psychotic Patients: Clinical Features and Treatment Response

PubMed Central

England, Mary L.; Öngür, Dost; Konopaske, Glenn T.; Karmacharya, Rakesh

2012-01-01

We report clinical features and treatment response in 25 patients with catatonia admitted to an inpatient psychiatric unit specializing in psychotic disorders. ECT, benzodiazepines, and clozapine had beneficial effects on catatonic features, while typical antipsychotics resulted in clinical worsening. PMID:21677256

Laboratory arc furnace features interchangeable hearths

NASA Technical Reports Server (NTRS)

Armstrong, J. L.; Kruger, O. L.

1967-01-01

Laboratory arc furnace using rapidly interchangeable hearths gains considerable versatility in casting so that buttons or special shaped castings can be produced. It features a sight glass for observation.

Teacher Preparation for Early Childhood: Special Education in Taiwan

ERIC Educational Resources Information Center

Ho, Hua-Kuo

2014-01-01

The purpose of this paper is intended to present the current model of teacher preparation for early childhood special education in Taiwan. Documentary analysis was conducted in the study to collect and analyze the obtained data. The main features of teacher preparation policies for early childhood special education in Taiwan could be summarized…

An evolutionary computation based algorithm for calculating solar differential rotation by automatic tracking of coronal bright points

NASA Astrophysics Data System (ADS)

Shahamatnia, Ehsan; Dorotovič, Ivan; Fonseca, Jose M.; Ribeiro, Rita A.

2016-03-01

Developing specialized software tools is essential to support studies of solar activity evolution. With new space missions such as Solar Dynamics Observatory (SDO), solar images are being produced in unprecedented volumes. To capitalize on that huge data availability, the scientific community needs a new generation of software tools for automatic and efficient data processing. In this paper a prototype of a modular framework for solar feature detection, characterization, and tracking is presented. To develop an efficient system capable of automatic solar feature tracking and measuring, a hybrid approach combining specialized image processing, evolutionary optimization, and soft computing algorithms is being followed. The specialized hybrid algorithm for tracking solar features allows automatic feature tracking while gathering characterization details about the tracked features. The hybrid algorithm takes advantages of the snake model, a specialized image processing algorithm widely used in applications such as boundary delineation, image segmentation, and object tracking. Further, it exploits the flexibility and efficiency of Particle Swarm Optimization (PSO), a stochastic population based optimization algorithm. PSO has been used successfully in a wide range of applications including combinatorial optimization, control, clustering, robotics, scheduling, and image processing and video analysis applications. The proposed tool, denoted PSO-Snake model, was already successfully tested in other works for tracking sunspots and coronal bright points. In this work, we discuss the application of the PSO-Snake algorithm for calculating the sidereal rotational angular velocity of the solar corona. To validate the results we compare them with published manual results performed by an expert.

Magnetic superelevation design of Halbach permanent magnet guideway for high-temperature superconducting maglev

NASA Astrophysics Data System (ADS)

Lei, Wuyang; Qian, Nan; Zheng, Jun; Huang, Huan; Zhang, Ya; Deng, Zigang

2017-07-01

To improve the curve negotiating ability of high-temperature superconducting (HTS) maglev system, a special structure of magnetic superelevation for double-pole Halbach permanent magnet guideway (PMG) was designed. The most significant feature of this design is the asymmetrical PMG that forms a slanting magnetic field without affecting the smoothness of the PMG surface. When HTS maglev vehicle runs through curves with magnetic superelevation, the vehicle will slant due to asymmetry in magnetic field and the flux-pinning effect of onboard HTS bulks. At the same time, one component of the levitation force provides a part of the centripetal force that reduces lateral acceleration of the vehicle and thus enhances its curve negotiating ability. Furthermore, the slant angle of magnetic superelevation can be adjusted by changing the materials and the thickness of the added permanent magnets. This magnetic superelevation method, together with orographic uplift, can be applied to different requirements of PMG designs. Besides, the applicability of this method would benefit future development of high-speed HTS maglev system.

Design of a Facility to Test the Advanced Stirling Radioisotope Generator Engineering Unit

NASA Technical Reports Server (NTRS)

Lewandowski, Edward J.; Schreiber, Jeffrey G.; Oriti, Salvatore M.; Meer, David W.; Brace, Michael H.; Dugala, Gina

2009-01-01

The Advanced Stirling Radioisotope Generator (ASRG) is being considered to power deep space missions. An engineering unit, the ASRG-EU, was designed and fabricated by Lockheed Martin under contract to the Department of Energy. This unit is currently on an extended operation test at NASA Glenn Research Center to generate performance data and validate the life and reliability predictions for the generator and the Stirling convertors. A special test facility was designed and built for testing the ASRG-EU. Details of the test facility design are discussed. The facility can operate the convertors under AC bus control or with the ASRG-EU controller. It can regulate input thermal power in either a fixed temperature or fixed power mode. An enclosure circulates cooled air around the ASRG-EU to remove heat rejected from the ASRG-EU by convection. A custom monitoring and data acquisition system supports the test. Various safety features, which allow 2417 unattended operation, are discussed.

The Sizing and Optimization Language, (SOL): Computer language for design problems

NASA Technical Reports Server (NTRS)

Lucas, Stephen H.; Scotti, Stephen J.

1988-01-01

The Sizing and Optimization Language, (SOL), a new high level, special purpose computer language was developed to expedite application of numerical optimization to design problems and to make the process less error prone. SOL utilizes the ADS optimization software and provides a clear, concise syntax for describing an optimization problem, the OPTIMIZE description, which closely parallels the mathematical description of the problem. SOL offers language statements which can be used to model a design mathematically, with subroutines or code logic, and with existing FORTRAN routines. In addition, SOL provides error checking and clear output of the optimization results. Because of these language features, SOL is best suited to model and optimize a design concept when the model consits of mathematical expressions written in SOL. For such cases, SOL's unique syntax and error checking can be fully utilized. SOL is presently available for DEC VAX/VMS systems. A SOL package is available which includes the SOL compiler, runtime library routines, and a SOL reference manual.

Superconducting Magnets for Accelerators

NASA Astrophysics Data System (ADS)

Brianti, G.; Tortschanoff, T.

1993-03-01

This chapter describes the main features of superconducting magnets for high energy synchrotrons and colliders. It refers to magnets presently used and under development for the most advanced accelerators projects, both recently constructed or in the preparatory phase. These magnets, using the technology mainly based on the NbTi conductor, are described from the aspect of design, materials, construction and performance. The trend toward higher performance can be gauged from the doubling of design field in less than a decade from about 4 T for the Tevatron to 10 T for the LHC. Special properties of the superconducting accelerator magnets, such as their general layout and the need of extensive computational treatment, the limits of performance inherent to the available conductors, the requirements on the structural design are described. The contribution is completed by elaborating on persistent current effects, quench protection and the cryostat design. As examples the main magnets for HERA and SSC, as well as the twin-aperture magnets for LHC, are presented.

Artistic and Industrial Institutions in Russian Education Structure in XIXth Century

NASA Astrophysics Data System (ADS)

Chernyh, D. G.

2017-11-01

The article briefly describes the history of the Russian design education in the XIXth century within the context of the single pan-European artistic process development. The attention is drawn to the peculiar features and causes of insufficient efficiency. The article specifies the role of architecture as a style-forming type of the artistic and technical activity in the establishment of the art industry. It emphasizes the importance of the designation of a designer profession as a special type of design activities going beyond the limits of “the art for art’s sake”. It asserts its right to independence, emphasizes its applied relevance and cross-disciplinary nature. It reveals the determining role of such historical and cultural phenomenon as the Russian style in the establishment and self-determination of the national art industry. The article links the growth rates of the Russian art industry with the industrial production development level and the level of social and legal relations in the state.

Grid point extraction and coding for structured light system

NASA Astrophysics Data System (ADS)

Song, Zhan; Chung, Ronald

2011-09-01

A structured light system simplifies three-dimensional reconstruction by illuminating a specially designed pattern to the target object, thereby generating a distinct texture on it for imaging and further processing. Success of the system hinges upon what features are to be coded in the projected pattern, extracted in the captured image, and matched between the projector's display panel and the camera's image plane. The codes have to be such that they are largely preserved in the image data upon illumination from the projector, reflection from the target object, and projective distortion in the imaging process. The features also need to be reliably extracted in the image domain. In this article, a two-dimensional pseudorandom pattern consisting of rhombic color elements is proposed, and the grid points between the pattern elements are chosen as the feature points. We describe how a type classification of the grid points plus the pseudorandomness of the projected pattern can equip each grid point with a unique label that is preserved in the captured image. We also present a grid point detector that extracts the grid points without the need of segmenting the pattern elements, and that localizes the grid points in subpixel accuracy. Extensive experiments are presented to illustrate that, with the proposed pattern feature definition and feature detector, more features points in higher accuracy can be reconstructed in comparison with the existing pseudorandomly encoded structured light systems.

Statistical analysis of textural features for improved classification of oral histopathological images.

PubMed

Muthu Rama Krishnan, M; Shah, Pratik; Chakraborty, Chandan; Ray, Ajoy K

2012-04-01

The objective of this paper is to provide an improved technique, which can assist oncopathologists in correct screening of oral precancerous conditions specially oral submucous fibrosis (OSF) with significant accuracy on the basis of collagen fibres in the sub-epithelial connective tissue. The proposed scheme is composed of collagen fibres segmentation, its textural feature extraction and selection, screening perfomance enhancement under Gaussian transformation and finally classification. In this study, collagen fibres are segmented on R,G,B color channels using back-probagation neural network from 60 normal and 59 OSF histological images followed by histogram specification for reducing the stain intensity variation. Henceforth, textural features of collgen area are extracted using fractal approaches viz., differential box counting and brownian motion curve . Feature selection is done using Kullback-Leibler (KL) divergence criterion and the screening performance is evaluated based on various statistical tests to conform Gaussian nature. Here, the screening performance is enhanced under Gaussian transformation of the non-Gaussian features using hybrid distribution. Moreover, the routine screening is designed based on two statistical classifiers viz., Bayesian classification and support vector machines (SVM) to classify normal and OSF. It is observed that SVM with linear kernel function provides better classification accuracy (91.64%) as compared to Bayesian classifier. The addition of fractal features of collagen under Gaussian transformation improves Bayesian classifier's performance from 80.69% to 90.75%. Results are here studied and discussed.

First principles pseudopotential calculation of electron energy loss near edge structures of lattice imperfections.

PubMed

Mizoguchi, Teruyasu; Matsunaga, Katsuyuki; Tochigi, Eita; Ikuhara, Yuichi

2012-01-01

Theoretical calculations of electron energy loss near edge structures (ELNES) of lattice imperfections, particularly a Ni(111)/ZrO₂(111) heterointerface and an Al₂O₃ stacking fault on the {1100} plane, are performed using a first principles pseudopotential method. The present calculation can qualitatively reproduce spectral features as well as chemical shifts in experiment by employing a special pseudopotential designed for the excited atom with a core-hole. From the calculation, spectral changes observed in O-K ELNES from a Ni/ZrO₂ interface can be attributable to interfacial oxygen-Ni interactions. In the O-K ELNES of Al₂O₃ stacking faults, theoretical calculation suggests that the spectral feature reflects coordination environment and chemical bonding. Powerful combinations of ELNES with a pseudopotential method used to investigate the atomic and electronic structures of lattice imperfections are demonstrated. Copyright © 2011 Elsevier Ltd. All rights reserved.

Astigmatism-corrected echelle spectrometer using an off-the-shelf cylindrical lens.

PubMed

Fu, Xiao; Duan, Fajie; Jiang, Jiajia; Huang, Tingting; Ma, Ling; Lv, Changrong

2017-10-01

As a special kind of spectrometer with the Czerny-Turner structure, the echelle spectrometer features two-dimensional dispersion, which leads to a complex astigmatic condition. In this work, we propose an optical design of astigmatism-corrected echelle spectrometer using an off-the-shelf cylindrical lens. The mathematical model considering astigmatism introduced by the off-axis mirrors, the echelle grating, and the prism is established. Our solution features simplified calculation and low-cost construction, which is capable of overall compensation of the astigmatism in a wide spectral range (200-600 nm). An optical simulation utilizing ZEMAX software, astigmatism assessment based on Zernike polynomials, and an instrument experiment is implemented to validate the effect of astigmatism correction. The results demonstrated that astigmatism of the echelle spectrometer was corrected to a large extent, and high spectral resolution better than 0.1 nm was achieved.

Control of adaptive immunity by the innate immune system.

PubMed

Iwasaki, Akiko; Medzhitov, Ruslan

2015-04-01

Microbial infections are recognized by the innate immune system both to elicit immediate defense and to generate long-lasting adaptive immunity. To detect and respond to vastly different groups of pathogens, the innate immune system uses several recognition systems that rely on sensing common structural and functional features associated with different classes of microorganisms. These recognition systems determine microbial location, viability, replication and pathogenicity. Detection of these features by recognition pathways of the innate immune system is translated into different classes of effector responses though specialized populations of dendritic cells. Multiple mechanisms for the induction of immune responses are variations on a common design principle wherein the cells that sense infections produce one set of cytokines to induce lymphocytes to produce another set of cytokines, which in turn activate effector responses. Here we discuss these emerging principles of innate control of adaptive immunity.

Automatic RBG-depth-pressure anthropometric analysis and individualised sleep solution prescription.

PubMed

Esquirol Caussa, Jordi; Palmero Cantariño, Cristina; Bayo Tallón, Vanessa; Cos Morera, Miquel Àngel; Escalera, Sergio; Sánchez, David; Sánchez Padilla, Maider; Serrano Domínguez, Noelia; Relats Vilageliu, Mireia

2017-08-01

Sleep surfaces must adapt to individual somatotypic features to maintain a comfortable, convenient and healthy sleep, preventing diseases and injuries. Individually determining the most adequate rest surface can often be a complex and subjective question. To design and validate an automatic multimodal somatotype determination model to automatically recommend an individually designed mattress-topper-pillow combination. Design and validation of an automated prescription model for an individualised sleep system is performed through a single-image 2 D-3 D analysis and body pressure distribution, to objectively determine optimal individual sleep surfaces combining five different mattress densities, three different toppers and three cervical pillows. A final study (n = 151) and re-analysis (n = 117) defined and validated the model, showing high correlations between calculated and real data (>85% in height and body circumferences, 89.9% in weight, 80.4% in body mass index and more than 70% in morphotype categorisation). Somatotype determination model can accurately prescribe an individualised sleep solution. This can be useful for healthy people and for health centres that need to adapt sleep surfaces to people with special needs. Next steps will increase model's accuracy and analise, if this prescribed individualised sleep solution can improve sleep quantity and quality; additionally, future studies will adapt the model to mattresses with technological improvements, tailor-made production and will define interfaces for people with special needs.

Algorithms for Image Analysis and Combination of Pattern Classifiers with Application to Medical Diagnosis

NASA Astrophysics Data System (ADS)

Georgiou, Harris

2009-10-01

Medical Informatics and the application of modern signal processing in the assistance of the diagnostic process in medical imaging is one of the more recent and active research areas today. This thesis addresses a variety of issues related to the general problem of medical image analysis, specifically in mammography, and presents a series of algorithms and design approaches for all the intermediate levels of a modern system for computer-aided diagnosis (CAD). The diagnostic problem is analyzed with a systematic approach, first defining the imaging characteristics and features that are relevant to probable pathology in mammo-grams. Next, these features are quantified and fused into new, integrated radio-logical systems that exhibit embedded digital signal processing, in order to improve the final result and minimize the radiological dose for the patient. In a higher level, special algorithms are designed for detecting and encoding these clinically interest-ing imaging features, in order to be used as input to advanced pattern classifiers and machine learning models. Finally, these approaches are extended in multi-classifier models under the scope of Game Theory and optimum collective deci-sion, in order to produce efficient solutions for combining classifiers with minimum computational costs for advanced diagnostic systems. The material covered in this thesis is related to a total of 18 published papers, 6 in scientific journals and 12 in international conferences.

Possible application of laser isotope separation

NASA Technical Reports Server (NTRS)

Delionback, L. M.

1975-01-01

The laser isotope separation process is described and its special economic features discussed. These features are its low cost electric power operation, capital investment costs, and the costs of process materials.

The Special Education Teacher as an Instructional Designer. Rational, Content, and Strategy for an Innovative Individualized Course on Instructional Design in Special Education. Working Paper 9.14.

ERIC Educational Resources Information Center

Thiagarajan, Sivasailam

Provided are the rationale, content and strategy for an introductory course in instructional design for special education teachers. The teacher's need for varied competencies in instructional design, management and interaction are discussed. It is recommended that teacher training include development of such design skills as task analysis, learner…

7 CFR 868.316 - Special grade designation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... FOR CERTAIN AGRICULTURAL COMMODITIES United States Standards for Milled Rice Special Grades, Special... designation for coated, granulated brewers, parboiled, undermilled, glutinous, or aromatic milled rice shall...

7 CFR 868.316 - Special grade designation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... FOR CERTAIN AGRICULTURAL COMMODITIES United States Standards for Milled Rice Special Grades, Special... designation for coated, granulated brewers, parboiled, undermilled, glutinous, or aromatic milled rice shall...

Development of an extensible dual-core wireless sensing node for cyber-physical systems

NASA Astrophysics Data System (ADS)

Kane, Michael; Zhu, Dapeng; Hirose, Mitsuhito; Dong, Xinjun; Winter, Benjamin; Häckell, Mortiz; Lynch, Jerome P.; Wang, Yang; Swartz, A.

2014-04-01

The introduction of wireless telemetry into the design of monitoring and control systems has been shown to reduce system costs while simplifying installations. To date, wireless nodes proposed for sensing and actuation in cyberphysical systems have been designed using microcontrollers with one computational pipeline (i.e., single-core microcontrollers). While concurrent code execution can be implemented on single-core microcontrollers, concurrency is emulated by splitting the pipeline's resources to support multiple threads of code execution. For many applications, this approach to multi-threading is acceptable in terms of speed and function. However, some applications such as feedback controls demand deterministic timing of code execution and maximum computational throughput. For these applications, the adoption of multi-core processor architectures represents one effective solution. Multi-core microcontrollers have multiple computational pipelines that can execute embedded code in parallel and can be interrupted independent of one another. In this study, a new wireless platform named Martlet is introduced with a dual-core microcontroller adopted in its design. The dual-core microcontroller design allows Martlet to dedicate one core to standard wireless sensor operations while the other core is reserved for embedded data processing and real-time feedback control law execution. Another distinct feature of Martlet is a standardized hardware interface that allows specialized daughter boards (termed wing boards) to be interfaced to the Martlet baseboard. This extensibility opens opportunity to encapsulate specialized sensing and actuation functions in a wing board without altering the design of Martlet. In addition to describing the design of Martlet, a few example wings are detailed, along with experiments showing the Martlet's ability to monitor and control physical systems such as wind turbines and buildings.

Teleoperated Modular Robots for Lunar Operations

NASA Technical Reports Server (NTRS)

Globus, Al; Hornby, Greg; Larchev, Greg; Hancher, Matt; Cannon, Howard; Lohn, Jason

2004-01-01

Solar system exploration is currently carried out by special purpose robots exquisitely designed for the anticipated tasks. However, all contingencies for in situ resource utilization (ISRU), human habitat preparation, and exploration will be difficult to anticipate. Furthermore, developing the necessary special purpose mechanisms for deployment and other capabilities is difficult and error prone. For example, the Galileo high gain antenna never opened, severely restricting the quantity of data returned by the spacecraft. Also, deployment hardware is used only once. To address these problems, we are developing teleoperated modular robots for lunar missions, including operations in transit from Earth. Teleoperation of lunar systems from Earth involves a three second speed-of-light delay, but experiment suggests that interactive operations are feasible.' Modular robots typically consist of many identical modules that pass power and data between them and can be reconfigured for different tasks providing great flexibility, inherent redundancy and graceful degradation as modules fail. Our design features a number of different hub, link, and joint modules to simplify the individual modules, lower structure cost, and provide specialized capabilities. Modular robots are well suited for space applications because of their extreme flexibility, inherent redundancy, high-density packing, and opportunities for mass production. Simple structural modules can be manufactured from lunar regolith in situ using molds or directed solar sintering. Software to direct and control modular robots is difficult to develop. We have used genetic algorithms to evolve both the morphology and control system for walking modular robots3 We are currently using evolvable system technology to evolve controllers for modular robots in the ISS glove box. Development of lunar modular robots will require software and physical simulators, including regolith simulation, to enable design and test of robot software and hardware, particularly automation software. Ready access to these simulators could provide opportunities for contest-driven development ala RoboCup (http://www.robocup.org/). Licensing of module designs could provide opportunities in the toy market and for spin-off applications.

Visual feature-tolerance in the reading network.

PubMed

Rauschecker, Andreas M; Bowen, Reno F; Perry, Lee M; Kevan, Alison M; Dougherty, Robert F; Wandell, Brian A

2011-09-08

A century of neurology and neuroscience shows that seeing words depends on ventral occipital-temporal (VOT) circuitry. Typically, reading is learned using high-contrast line-contour words. We explored whether a specific VOT region, the visual word form area (VWFA), learns to see only these words or recognizes words independent of the specific shape-defining visual features. Word forms were created using atypical features (motion-dots, luminance-dots) whose statistical properties control word-visibility. We measured fMRI responses as word form visibility varied, and we used TMS to interfere with neural processing in specific cortical circuits, while subjects performed a lexical decision task. For all features, VWFA responses increased with word-visibility and correlated with performance. TMS applied to motion-specialized area hMT+ disrupted reading performance for motion-dots, but not line-contours or luminance-dots. A quantitative model describes feature-convergence in the VWFA and relates VWFA responses to behavioral performance. These findings suggest how visual feature-tolerance in the reading network arises through signal convergence from feature-specialized cortical areas. Copyright © 2011 Elsevier Inc. All rights reserved.

A Rapid Method to Achieve Aero-Engine Blade Form Detection

PubMed Central

Sun, Bin; Li, Bing

2015-01-01

This paper proposes a rapid method to detect aero-engine blade form, according to the characteristics of an aero-engine blade surface. This method first deduces an inclination error model in free-form surface measurements based on the non-contact laser triangulation principle. Then a four-coordinate measuring system was independently developed, a special fixture was designed according to the blade shape features, and a fast measurement of the blade features path was planned. Finally, by using the inclination error model for correction of acquired data, the measurement error that was caused by tilt form is compensated. As a result the measurement accuracy of the Laser Displacement Sensor was less than 10 μm. After the experimental verification, this method makes full use of optical non-contact measurement fast speed, high precision and wide measuring range of features. Using a standard gauge block as a measurement reference, the coordinate system conversion data is simple and practical. It not only improves the measurement accuracy of the blade surface, but also its measurement efficiency. Therefore, this method increases the value of the measurement of complex surfaces. PMID:26039420

Design and development of a virtual reality simulator for advanced cardiac life support training.

PubMed

Vankipuram, Akshay; Khanal, Prabal; Ashby, Aaron; Vankipuram, Mithra; Gupta, Ashish; DrummGurnee, Denise; Josey, Karen; Smith, Marshall

2014-07-01

The use of virtual reality (VR) training tools for medical education could lead to improvements in the skills of clinicians while providing economic incentives for healthcare institutions. The use of VR tools can also mitigate some of the drawbacks currently associated with providing medical training in a traditional clinical environment such as scheduling conflicts and the need for specialized equipment (e.g., high-fidelity manikins). This paper presents the details of the framework and the development methodology associated with a VR-based training simulator for advanced cardiac life support, a time critical, team-based medical scenario. In addition, we also report the key findings of a usability study conducted to assess the efficacy of various features of this VR simulator through a postuse questionnaire administered to various care providers. The usability questionnaires were completed by two groups that used two different versions of the VR simulator. One version consisted of the VR trainer with it all its features and a minified version with certain immersive features disabled. We found an increase in usability scores from the minified group to the full VR group.

iview: an interactive WebGL visualizer for protein-ligand complex.

PubMed

Li, Hongjian; Leung, Kwong-Sak; Nakane, Takanori; Wong, Man-Hon

2014-02-25

Visualization of protein-ligand complex plays an important role in elaborating protein-ligand interactions and aiding novel drug design. Most existing web visualizers either rely on slow software rendering, or lack virtual reality support. The vital feature of macromolecular surface construction is also unavailable. We have developed iview, an easy-to-use interactive WebGL visualizer of protein-ligand complex. It exploits hardware acceleration rather than software rendering. It features three special effects in virtual reality settings, namely anaglyph, parallax barrier and oculus rift, resulting in visually appealing identification of intermolecular interactions. It supports four surface representations including Van der Waals surface, solvent excluded surface, solvent accessible surface and molecular surface. Moreover, based on the feature-rich version of iview, we have also developed a neat and tailor-made version specifically for our istar web platform for protein-ligand docking purpose. This demonstrates the excellent portability of iview. Using innovative 3D techniques, we provide a user friendly visualizer that is not intended to compete with professional visualizers, but to enable easy accessibility and platform independence.

A rapid method to achieve aero-engine blade form detection.

PubMed

Sun, Bin; Li, Bing

2015-06-01

This paper proposes a rapid method to detect aero-engine blade form, according to the characteristics of an aero-engine blade surface. This method first deduces an inclination error model in free-form surface measurements based on the non-contact laser triangulation principle. Then a four-coordinate measuring system was independently developed, a special fixture was designed according to the blade shape features, and a fast measurement of the blade features path was planned. Finally, by using the inclination error model for correction of acquired data, the measurement error that was caused by tilt form is compensated. As a result the measurement accuracy of the Laser Displacement Sensor was less than 10 μm. After the experimental verification, this method makes full use of optical non-contact measurement fast speed, high precision and wide measuring range of features. Using a standard gauge block as a measurement reference, the coordinate system conversion data is simple and practical. It not only improves the measurement accuracy of the blade surface, but also its measurement efficiency. Therefore, this method increases the value of the measurement of complex surfaces.

Guide to Special Information in Scientific and Engineering Journals.

ERIC Educational Resources Information Center

Harris, Mary Elizabeth

This update of a 1983 annotated bibliography lists 298 special features or special issues of science and technology periodicals with emphasis on compilations of information that appear in periodicals on a regular basis. In addition to the 203 entries listed in the original edition, 95 new entries are included. Subjects covered in the guide include…

7 CFR 868.213 - Special grade designation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... FOR CERTAIN AGRICULTURAL COMMODITIES United States Standards for Rough Rice Special Grades, Special... designation for infested, parboiled, smutty, glutinous, or aromatic rough rice shall include, following the...

7 CFR 868.213 - Special grade designation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... FOR CERTAIN AGRICULTURAL COMMODITIES United States Standards for Rough Rice Special Grades, Special... designation for infested, parboiled, smutty, glutinous, or aromatic rough rice shall include, following the...

Special Feature on Some Popular Pastimes: Wilderness Skills, Handcrafts, Mini and Trail Biking

ERIC Educational Resources Information Center

Meiklejohn-Moz, Jane; And Others

1976-01-01

In an effort to stimulate teacher-readers to find out what specialized activities their own students may be absorbed in, the authors describe some less commonly known student recreational activities. (MB)

29 CFR 1919.32 - Specially designed blocks and components.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Specially designed blocks and components. 1919.32 Section 1919.32 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Treatment; Competent Persons § 1919.32 Specially designed blocks and components. (a) Blocks and connecting...

78 FR 40921 - Amendment to the International Traffic in Arms Regulations: Continued Implementation of Export...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-08

... specially designed parts, components, accessories, and attachments therefor (a) in production, (b... production, testing and inspection equipment, and tooling, specially designed for plants or facilities..., a definition for specially designed, and responses to public comments and changes to other sections...

Will learning to solve one-step equations pose a challenge to 8th grade students?

NASA Astrophysics Data System (ADS)

Ngu, Bing Hiong; Phan, Huy P.

2017-08-01

Assimilating multiple interactive elements simultaneously in working memory to allow understanding to occur, while solving an equation, would impose a high cognitive load. Element interactivity arises from the interaction between elements within and across operational and relational lines. Moreover, operating with special features (e.g. negative pronumeral) poses additional challenge to master equation solving skills. In an experiment, 41 8th grade students (girls = 16, boys = 25) sat for a pre-test, attended a session about equation solving, completed an acquisition phase which constituted the main intervention and were tested again in a post-test. The results showed that at post-test, students performed better on one-step equations tapping low rather than high element interactivity knowledge. In addition, students performed better on those one-step equations that contained no special features. Thus, both the degree of element interactivity and the operation with special features affect the challenge posed to 8th grade students on learning how to solve one-step equations.

Manikin Human-Patient Simulator Training.

PubMed

Horn, Gregory T; Bowling, F Y; Lowe, David E; Parimore, James G; Stagliano, David R; Studer, Nicholas M

Human-patient simulators (HPSs) may help enhance medical education. Manikin HPS devices respond to common field medical interventions, such as cricothyroidotomy, and have realistic feedback features, such as respirations and pulses. This study surveys Special Operations Medics for evaluations of HPS features. Of 518 subjects, 376 completed testing and surveys with valid responses. A total of 102 variables were divided into three categories-general characteristics, procedures, and injuries-and assessed on a fivepoint Likert scale. The Student t test was used to analyze data together and as separate groups against each other and against an aggregated mean. Features that received high scores (i.e., higher than 4.5/5) corresponded closely with pillars of the Tactical Combat Casualty Care (TCCC) curriculum, basic life support, and realism. US Army Special Operations Command and US Special Operations Command Medics have overall high confidence in manikin HPS devices and specifically in those that align with TCCC training and lifesaving procedures. The skills most valued coincide with difficult-to-practice measures, such as cricothyroidotomy and wound packing. Features such as prerecorded sounds, sex, automated movements, skin color, defibrillation, bowel sounds, and electrocardiogram are rated lower. These evaluations may guide future development or procurement of manikin HPS devices. 2017.

Design of a biomimetic robotic octopus arm.

PubMed

Laschi, C; Mazzolai, B; Mattoli, V; Cianchetti, M; Dario, P

2009-03-01

This paper reports the rationale and design of a robotic arm, as inspired by an octopus arm. The octopus arm shows peculiar features, such as the ability to bend in all directions, to produce fast elongations, and to vary its stiffness. The octopus achieves these unique motor skills, thanks to its peculiar muscular structure, named muscular hydrostat. Different muscles arranged on orthogonal planes generate an antagonistic action on each other in the muscular hydrostat, which does not change its volume during muscle contractions, and allow bending and elongation of the arm and stiffness variation. By drawing inspiration from natural skills of octopus, and by analysing the geometry and mechanics of the muscular structure of its arm, we propose the design of a robot arm consisting of an artificial muscular hydrostat structure, which is completely soft and compliant, but also able to stiffen. In this paper, we discuss the design criteria of the robotic arm and how this design and the special arrangement of its muscular structure may bring the building of a robotic arm into being, by showing the results obtained by mathematical models and prototypical mock-ups.

The Aurora space launcher concept

NASA Astrophysics Data System (ADS)

Kopp, Alexander; Stappert, Sven; Mattsson, David; Olofsson, Kurt; Marklund, Erik; Kurth, Guido; Mooij, Erwin; Roorda, Evelyne

2017-11-01

This paper gives an overview about the Aurora reusable space launcher concept study that was initiated in late-2015/early-2016. Within the Aurora study, several spaceplane-like vehicle configurations with different geometries, propulsion systems and mission profiles will be designed, investigated and evaluated with respect to their technical and economic feasibility. The first part of this paper will discuss the study logic and the current status of the Aurora studies and introduces the first vehicle configurations and their system design status. As the identification of highly efficient structural designs is of particular interest for Aurora, the structural design and analysis approach will be discussed in higher level of detail. A special design feature of the Aurora vehicle configurations is the utilization of the novel thin-ply composite material technology for structural mass reductions. Therefore, the second part of this paper will briefly discuss this technology and investigate the application and potential mass savings on vehicle level within simplified structural analysis studies. The results indicate that significant mass savings could be possible. Finally, an outlook on the next steps is provided.

Earthquake design criteria for small hydro projects in the Philippines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, P.P.; McCandless, D.H.; Asce, M.

1995-12-31

The definition of the seismic environment and seismic design criteria of more than twenty small hydro projects in the northern part of the island of Luzon in the Philippines took a special urgency on the wake of the Magnitude 7.7 earthquake that shook the island on July 17, 1990. The paper describes the approach followed to determine design shaking level criteria at each hydro site consistent with the seismic environment estimated at that same site. The approach consisted of three steps: (1) Seismicity: understanding the mechanisms and tectonic features susceptible to generate seismicity and estimating the associated seismicity levels, (2)more » Seismic Hazard: in the absence of an accurate historical record, using statistics to determine the expected level of ground shaking at a site during the operational 100-year design life of each Project, and (3) Criteria Selection: finally and most importantly, exercising judgment in estimating the final proposed level of shaking at each site. The resulting characteristics of estimated seismicity and seismic hazard and the proposed final earthquake design criteria are provided.« less

The Aurora space launcher concept

NASA Astrophysics Data System (ADS)

Kopp, Alexander; Stappert, Sven; Mattsson, David; Olofsson, Kurt; Marklund, Erik; Kurth, Guido; Mooij, Erwin; Roorda, Evelyne

2018-06-01

This paper gives an overview about the Aurora reusable space launcher concept study that was initiated in late-2015/early-2016. Within the Aurora study, several spaceplane-like vehicle configurations with different geometries, propulsion systems and mission profiles will be designed, investigated and evaluated with respect to their technical and economic feasibility. The first part of this paper will discuss the study logic and the current status of the Aurora studies and introduces the first vehicle configurations and their system design status. As the identification of highly efficient structural designs is of particular interest for Aurora, the structural design and analysis approach will be discussed in higher level of detail. A special design feature of the Aurora vehicle configurations is the utilization of the novel thin-ply composite material technology for structural mass reductions. Therefore, the second part of this paper will briefly discuss this technology and investigate the application and potential mass savings on vehicle level within simplified structural analysis studies. The results indicate that significant mass savings could be possible. Finally, an outlook on the next steps is provided.

Robust image features: concentric contrasting circles and their image extraction

NASA Astrophysics Data System (ADS)

Gatrell, Lance B.; Hoff, William A.; Sklair, Cheryl W.

1992-03-01

Many computer vision tasks can be simplified if special image features are placed on the objects to be recognized. A review of special image features that have been used in the past is given and then a new image feature, the concentric contrasting circle, is presented. The concentric contrasting circle image feature has the advantages of being easily manufactured, easily extracted from the image, robust extraction (true targets are found, while few false targets are found), it is a passive feature, and its centroid is completely invariant to the three translational and one rotational degrees of freedom and nearly invariant to the remaining two rotational degrees of freedom. There are several examples of existing parallel implementations which perform most of the extraction work. Extraction robustness was measured by recording the probability of correct detection and the false alarm rate in a set of images of scenes containing mockups of satellites, fluid couplings, and electrical components. A typical application of concentric contrasting circle features is to place them on modeled objects for monocular pose estimation or object identification. This feature is demonstrated on a visually challenging background of a specular but wrinkled surface similar to a multilayered insulation spacecraft thermal blanket.

78 FR 31431 - Export Administration Regulations (EAR): Control of Spacecraft Systems and Related Items the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-24

.... Paragraph 9A515.b would control ground control systems and training simulators ``specially designed'' for.... Paragraph .d would control certain radiation hardened microelectronic circuits that are ``specially designed... .a would control test, inspection, and production ``equipment'' ``specially designed'' for the...

Industry-relevant magnetron sputtering and cathodic arc ultra-high vacuum deposition system for in situ x-ray diffraction studies of thin film growth using high energy synchrotron radiation.

PubMed

Schroeder, J L; Thomson, W; Howard, B; Schell, N; Näslund, L-Å; Rogström, L; Johansson-Jõesaar, M P; Ghafoor, N; Odén, M; Nothnagel, E; Shepard, A; Greer, J; Birch, J

2015-09-01

We present an industry-relevant, large-scale, ultra-high vacuum (UHV) magnetron sputtering and cathodic arc deposition system purposefully designed for time-resolved in situ thin film deposition/annealing studies using high-energy (>50 keV), high photon flux (>10(12) ph/s) synchrotron radiation. The high photon flux, combined with a fast-acquisition-time (<1 s) two-dimensional (2D) detector, permits time-resolved in situ structural analysis of thin film formation processes. The high-energy synchrotron-radiation based x-rays result in small scattering angles (<11°), allowing large areas of reciprocal space to be imaged with a 2D detector. The system has been designed for use on the 1-tonne, ultra-high load, high-resolution hexapod at the P07 High Energy Materials Science beamline at PETRA III at the Deutsches Elektronen-Synchrotron in Hamburg, Germany. The deposition system includes standard features of a typical UHV deposition system plus a range of special features suited for synchrotron radiation studies and industry-relevant processes. We openly encourage the materials research community to contact us for collaborative opportunities using this unique and versatile scientific instrument.

Rotation-invariant features for multi-oriented text detection in natural images.

PubMed

Yao, Cong; Zhang, Xin; Bai, Xiang; Liu, Wenyu; Ma, Yi; Tu, Zhuowen

2013-01-01

Texts in natural scenes carry rich semantic information, which can be used to assist a wide range of applications, such as object recognition, image/video retrieval, mapping/navigation, and human computer interaction. However, most existing systems are designed to detect and recognize horizontal (or near-horizontal) texts. Due to the increasing popularity of mobile-computing devices and applications, detecting texts of varying orientations from natural images under less controlled conditions has become an important but challenging task. In this paper, we propose a new algorithm to detect texts of varying orientations. Our algorithm is based on a two-level classification scheme and two sets of features specially designed for capturing the intrinsic characteristics of texts. To better evaluate the proposed method and compare it with the competing algorithms, we generate a comprehensive dataset with various types of texts in diverse real-world scenes. We also propose a new evaluation protocol, which is more suitable for benchmarking algorithms for detecting texts in varying orientations. Experiments on benchmark datasets demonstrate that our system compares favorably with the state-of-the-art algorithms when handling horizontal texts and achieves significantly enhanced performance on variant texts in complex natural scenes.

The aeolian wind tunnel

NASA Technical Reports Server (NTRS)

Iversen, J. D.

1991-01-01

The aeolian wind tunnel is a special case of a larger subset of the wind tunnel family which is designed to simulate the atmospheric surface layer winds to small scale (a member of this larger subset is usually called an atmospheric boundary layer wind tunnel or environmental wind tunnel). The atmospheric boundary layer wind tunnel is designed to simulate, as closely as possible, the mean velocity and turbulence that occur naturally in the atmospheric boundary layer (defined as the lowest portion of the atmosphere, of the order of 500 m, in which the winds are most greatly affected by surface roughness and topography). The aeolian wind tunnel is used for two purposes: to simulate the physics of the saltation process and to model at small scale the erosional and depositional processes associated with topographic surface features. For purposes of studying aeolian effects on the surface of Mars and Venus as well as on Earth, the aeolian wind tunnel continues to prove to be a useful tool for estimating wind speeds necessary to move small particles on the three planets as well as to determine the effects of topography on the evolution of aeolian features such as wind streaks and dune patterns.

A New Dusts Sensor for Cultural Heritage Applications Based on Image Processing

PubMed Central

Proietti, Andrea; Leccese, Fabio; Caciotta, Maurizio; Morresi, Fabio; Santamaria, Ulderico; Malomo, Carmela

2014-01-01

In this paper, we propose a new sensor for the detection and analysis of dusts (seen as powders and fibers) in indoor environments, especially designed for applications in the field of Cultural Heritage or in other contexts where the presence of dust requires special care (surgery, clean rooms, etc.). The presented system relies on image processing techniques (enhancement, noise reduction, segmentation, metrics analysis) and it allows obtaining both qualitative and quantitative information on the accumulation of dust. This information aims to identify the geometric and topological features of the elements of the deposit. The curators can use this information in order to design suitable prevention and maintenance actions for objects and environments. The sensor consists of simple and relatively cheap tools, based on a high-resolution image acquisition system, a preprocessing software to improve the captured image and an analysis algorithm for the feature extraction and the classification of the elements of the dust deposit. We carried out some tests in order to validate the system operation. These tests were performed within the Sistine Chapel in the Vatican Museums, showing the good performance of the proposed sensor in terms of execution time and classification accuracy. PMID:24901977

Creativity: Incubation as a Special Case of Reminiscence.

ERIC Educational Resources Information Center

Dorsel, Thomas N.

1979-01-01

Similarities between features of incubation in creative problem solving and reminiscence are pointed out and the author suggests that incubation may merely be a special type of reminiscence. Note: For related information, see EC 120 232-238. (CL)

Special places in the Lake Calumet area.

Treesearch

Herbert W. Schroeder

2004-01-01

An open-ended, qualitative survey was conducted to identify special places in the Lake Calumet area of northeastern Illinois and northwestern Indiana, and to learn what kinds of experiences and environmental features make these places memorable and important to people.

Special report: FAA's third annual commercial space transportation forecast conference (February 8-9 2000)

DOT National Transportation Integrated Search

2000-02-01

The Third Annual Federal Aviation Administration (FAA) Commercial Space : Transportation Forecast Conference took place in Arlington, Virginia at the Sheraton National Hotel. The year 2000 conference featured seven panels and several special presenta...

Description of a 2.3 kW power transformer for space applications

NASA Technical Reports Server (NTRS)

Hansen, I.

1979-01-01

The principle features and special testing of a high voltage high power transformer designed and developed for space application are described. The transformer is operated in a series resonant inverter supplying beam power to a 30 cm mercury ion thruster. Electrical requirements include operation of 2.3 kW continuous power output, primary currents to 35 amps rms, and frequencies up to 20 kHz. High efficiency was obtained through detailed considerations of the tradeoffs available in core materials, wire selection, coil configurations and thermal control. A number of novel heat removal techniques are discussed which control the winding temperature using only the available conductive cooling.

Investigation of Condensed Media in Weak Fields by the Method of Nuclear Magnetic Resonance

NASA Astrophysics Data System (ADS)

Davydov, V. V.; Myazin, N. S.; Dudkin, V. I.; Velichko, E. N.

2018-05-01

A compact design of a rapid-response nuclear magnetic spectrometer for investigation of condensed media in weak fields is reported. As a result of investigation of different condensed media, special features of recording a nuclear magnetic resonance (NMR) signal in a weak magnetic field from a small volume of the medium under study are established. For the first time the NMR absorption spectra of condensed media in a weak field are collected. Based on the results of experimental studies, the potential of using a compact NMR-spectrometer for condensed media monitoring in a rapid response mode is determined.

Near wakes of advanced turbopropellers

NASA Technical Reports Server (NTRS)

Hanson, D. B.; Patrick, W. P.

1989-01-01

The flow in the wake of a model single rotation Prop-Fan rotor operating in a wind tunnel was traversed with a hot-wire anemometer system designed to determine the 3 periodic velocity components. Special data acquisition and data reduction methods were required to deal with the high data frequency, narrow wakes, and large fluctuating air angles in the tip vortex region. The model tip helical Mach number was 1.17, simulating the cruise condition. Although the flow field is complex, flow features such as viscous velocity defects, vortex sheets, tip vortices, and propagating acoustic pulses are clearly identified with the aid of a simple analytical wake theory.

Mexican sign language recognition using normalized moments and artificial neural networks

NASA Astrophysics Data System (ADS)

Solís-V., J.-Francisco; Toxqui-Quitl, Carina; Martínez-Martínez, David; H.-G., Margarita

2014-09-01

This work presents a framework designed for the Mexican Sign Language (MSL) recognition. A data set was recorded with 24 static signs from the MSL using 5 different versions, this MSL dataset was captured using a digital camera in incoherent light conditions. Digital Image Processing was used to segment hand gestures, a uniform background was selected to avoid using gloved hands or some special markers. Feature extraction was performed by calculating normalized geometric moments of gray scaled signs, then an Artificial Neural Network performs the recognition using a 10-fold cross validation tested in weka, the best result achieved 95.83% of recognition rate.

The Stable Solar Analyzer

NASA Technical Reports Server (NTRS)

Rust, D. M.; Appourchaux, T.

1988-01-01

Progress in the development of an instrument with very high (1:10 billion) wavelength stability designed to measure solar surface velocities and magnetic fields is reported. The instrument determines Doppler and Zeeman shifts in solar spectral lines by a 6-point weighted average. It is built around an electrically tunable solid lithium-niobate Fabry-Perot etalon that is stabilized against a diode laser which itself is locked to a resonance line of cesium 133. Key features are the etalon, which acts as a wide-angle 0.017-nm solar filter, the camera with a specially stabilized shutter, and the instrument control and data collection system. Use of the instrument in helioseismological research is emphasized.

A modern space simulation facility to accommodate high production acceptance testing

NASA Technical Reports Server (NTRS)

Glover, J. D.

1986-01-01

A space simulation laboratory that supports acceptance testing of spacecraft and associated subsystems at throughput rates as high as nine per year is discussed. The laboratory includes a computer operated 27' by 30' space simulation, a 20' by 20' by 20' thermal cycle chamber and an eight station thermal cycle/thermal vacuum test system. The design philosophy and unique features of each system are discussed. The development of operating procedures, test team requirements, test team integration, and other peripheral activation details are described. A discussion of special accommodations for the efficient utilization of the systems in support of high rate production is presented.

The NASA Ames integral aircraft passenger seat concept - A human engineering approach

NASA Technical Reports Server (NTRS)

Kubokawa, C. C.

1974-01-01

A new NASA Ames concept for an aircraft passenger seat has been under research and development since 1968. It includes many human-factor features that will provide protection to the passenger from vibration, jostle, and high impact. It is comfortable and safer than any of the seats presently in use. An in-depth design, fabrication, and impact analysis was conducted in order to design a seat that will maximize passenger protection in high g impacts (20 g horizontal -Gx, 36 g vertical +Gz, 16 g lateral Gy). The method for absorbing impact energy was accomplished with a combination of stretching stainless steel cables, thread breaking of stitches, hydraulic mechanism and the special Temper Form cushions. The restraint system for the seat consisted of a lap belt and shoulder harness inertia reel combination.

A hierarchy for modeling high speed propulsion systems

NASA Technical Reports Server (NTRS)

Hartley, Tom T.; Deabreu, Alex

1991-01-01

General research efforts on reduced order propulsion models for control systems design are overviewed. Methods for modeling high speed propulsion systems are discussed including internal flow propulsion systems that do not contain rotating machinery such as inlets, ramjets, and scramjets. The discussion is separated into four sections: (1) computational fluid dynamics model for the entire nonlinear system or high order nonlinear models; (2) high order linearized model derived from fundamental physics; (3) low order linear models obtained from other high order models; and (4) low order nonlinear models. Included are special considerations on any relevant control system designs. The methods discussed are for the quasi-one dimensional Euler equations of gasdynamic flow. The essential nonlinear features represented are large amplitude nonlinear waves, moving normal shocks, hammershocks, subsonic combustion via heat addition, temperature dependent gases, detonation, and thermal choking.

Simulation analysis of a novel high efficiency silicon solar cell

NASA Technical Reports Server (NTRS)

Mokashi, Anant R.; Daud, T.; Kachare, A. H.

1985-01-01

It is recognized that crystalline silicon photovoltaic module efficiency of 15 percent or more is required for cost-effective photovoltaic energy utilization. This level of module efficiency requires large-area encapsulated production cell efficiencies in the range of 18 to 20 percent. Though the theoretical maximum of silicon solar cell efficiency for an idealized case is estimated to be around 30 percent, practical performance of cells to-date are considerably below this limit. This is understood to be largely a consequence of minority carrier losses in the bulk as well as at all surfaces including those under the metal contacts. In this paper a novel device design with special features to reduce bulk and surface recombination losses is evaluated using numerical analysis technique. Details of the numerical model, cell design, and analysis results are presented.

Fractional Factorial Experiment Designs to Minimize Configuration Changes in Wind Tunnel Testing

NASA Technical Reports Server (NTRS)

DeLoach, Richard; Cler, Daniel L.; Graham, Albert B.

2002-01-01

This paper serves as a tutorial to introduce the wind tunnel research community to configuration experiment designs that can satisfy resource constraints in a configuration study involving several variables, without arbitrarily eliminating any of them from the experiment initially. The special case of a configuration study featuring variables at two levels is examined in detail. This is the type of study in which each configuration variable has two natural states - 'on or off', 'deployed or not deployed', 'low or high', and so forth. The basic principles are illustrated by results obtained in configuration studies conducted in the Langley National Transonic Facility and in the ViGYAN Low Speed Tunnel in Hampton, Virginia. The crucial role of interactions among configuration variables is highlighted with an illustration of difficulties that can be encountered when they are not properly taken into account.

A wave-bending structure at Ka-band using 3D-printed metamaterial

NASA Astrophysics Data System (ADS)

Wu, Junqiang; Liang, Min; Xin, Hao

2018-03-01

Three-dimensional printing technologies enable metamaterials of complex structures with arbitrary inhomogeneity. In this work, a 90° wave-bending structure at the Ka-band (26.5-40 GHz) based on 3D-printed metamaterials is designed, fabricated, and measured. The wave-bending effect is realized through a spatial distribution of varied effective dielectric constants. Based on the effective medium theory, different effective dielectric constants are accomplished by special, 3D-printable unit cells, which allow different ratios of dielectric to air at the unit cell level. In contrast to traditional, metallic-structure-included metamaterial designs, the reported wave-bending structure here is all dielectric and implemented by the polymer-jetting technique, which features rapid, low-cost, and convenient prototyping. Both simulation and experiment results demonstrate the effectiveness of the wave-bending structure.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makowska, Małgorzata G., E-mail: malg@dtu.dk; European Spallation Source ESS AB, P.O. Box 176, SE-221 00 Lund; Theil Kuhn, Luise

High material penetration by neutrons allows for experiments using sophisticated sample environments providing complex conditions. Thus, neutron imaging holds potential for performing in situ nondestructive measurements on large samples or even full technological systems, which are not possible with any other technique. This paper presents a new sample environment for in situ high resolution neutron imaging experiments at temperatures from room temperature up to 1100 °C and/or using controllable flow of reactive atmospheres. The design also offers the possibility to directly combine imaging with diffraction measurements. Design, special features, and specification of the furnace are described. In addition, examples of experimentsmore » successfully performed at various neutron facilities with the furnace, as well as examples of possible applications are presented. This covers a broad field of research from fundamental to technological investigations of various types of materials and components.« less

Design of a colicin E7 based chimeric zinc-finger nuclease

NASA Astrophysics Data System (ADS)

Németh, Eszter; Schilli, Gabriella K.; Nagy, Gábor; Hasenhindl, Christoph; Gyurcsik, Béla; Oostenbrink, Chris

2014-08-01

Colicin E7 is a natural bacterial toxin. Its nuclease domain (NColE7) enters the target cell and kills it by digesting the nucleic acids. The HNH-motif as the catalytic centre of NColE7 at the C-terminus requires the positively charged N-terminal loop for the nuclease activity—offering opportunities for allosteric control in a NColE7-based artificial nuclease. Accordingly, four novel zinc finger nucleases were designed by computational methods exploiting the special structural features of NColE7. The constructed models were subjected to MD simulations. The comparison of structural stability and functional aspects showed that these models may function as safely controlled artificial nucleases. This study was complemented by random mutagenesis experiments identifying potentially important residues for NColE7 function outside the catalytic region.

PrimerZ: streamlined primer design for promoters, exons and human SNPs.

PubMed

Tsai, Ming-Fang; Lin, Yi-Jung; Cheng, Yu-Chang; Lee, Kuo-Hsi; Huang, Cheng-Chih; Chen, Yuan-Tsong; Yao, Adam

2007-07-01

PrimerZ (http://genepipe.ngc.sinica.edu.tw/primerz/) is a web application dedicated primarily to primer design for genes and human SNPs. PrimerZ accepts genes by gene name or Ensembl accession code, and SNPs by dbSNP rs or AFFY_Probe IDs. The promoter and exon sequence information of all gene transcripts fetched from the Ensembl database (http://www.ensembl.org) are processed before being passed on to Primer3 (http://frodo.wi.mit.edu/cgi-bin/primer3/primer3_www.cgi) for individual primer design. All results returned from Primer 3 are organized and integrated in a specially designed web page for easy browsing. Besides the web page presentation, csv text file export is also provided for enhanced user convenience. PrimerZ automates highly standard but tedious gene primer design to improve the success rate of PCR experiments. More than 2000 primers have been designed with PrimerZ at our institute since 2004 and the success rate is over 70%. The addition of several new features has made PrimerZ even more useful to the research community in facilitating primer design for promoters, exons and SNPs.

77 FR 43158 - Special Local Regulation; Battle on the Bay Powerboat Race Atlantic Ocean, Fire Island, NY

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-24

... 1625-AA08 Special Local Regulation; Battle on the Bay Powerboat Race Atlantic Ocean, Fire Island, NY... temporary special local regulation on the navigable waters of the Atlantic Ocean off Smith Point Park, Fire... on the Atlantic Ocean off Smith Point Park, Fire Island, NY and will feature six classes of offshore...

Evaluation of Features of Development of Sports Way of Swimming of Students of Various Sports Specialization

ERIC Educational Resources Information Center

Yermahanova, Amina; Nurmakhambetova, Dinara; Bozhig, Zhanbolat; Imanbetov, Amanbek

2016-01-01

Bachelor educational program "Physical culture and sport" must master special, substantive and core competencies, not only in the chosen specialization, but also in the basic sports, including "Swimming." It is a necessity due to the fact that the graduate program in order to protect their health and life should own at least…

No Special Equipment Required: The Accessibility Features Built into the Windows and Macintosh Operating Systems make Computers Accessible for Students with Special Needs

ERIC Educational Resources Information Center

Kimball,Walter H.; Cohen,Libby G.; Dimmick,Deb; Mills,Rick

2003-01-01

The proliferation of computers and other electronic learning devices has made knowledge and communication accessible to people with a wide range of abilities. Both Windows and Macintosh computers have accessibility options to help with many different special needs. This documents discusses solutions for: (1) visual impairments; (2) hearing…

Using Evidence-Centered Design to Create a Special Educator Observation System

ERIC Educational Resources Information Center

Johnson, Evelyn S.; Crawford, Angela R.; Moylan, Laura A.; Zheng, Yuzhu

2018-01-01

The Evidence-Centered Design (ECD) framework was used to create a special education teacher observation system, Recognizing Effective Special Education Teachers (RESET). Extensive reviews of research informed the domain analysis and modeling stages, and led to the conceptual framework in which effective special education teaching is…

Design, Development and Operational Experience of Demonstration Facility for Cs-137 Source Pencil Production at Trombay - 13283

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patil, S.B.; Srivastava, P.; Mishra, S.K.

2013-07-01

Radioactive waste management is a vital aspect of any nuclear program. The commercial feasibility of the nuclear program largely depends on the efficiency of the waste management techniques. One of such techniques is the separation of high yield radio-nuclides from the waste and making it suitable for medical and industrial applications. This will give societal benefit in addition to revenue generation. Co-60, the isotope presently being used for medical applications, needs frequent replacement because of its short half life. Cs-137, the major constituent of the nuclear waste, is a suitable substitute for Co-60 as a radioactive source because of itsmore » longer half life (28 years). Indian nuclear waste management program has given special emphasis on utilization of Cs-137 for such applications. In view of this a demonstration facility has been designed for vitrification of Cs-137 in borosilicate glass, cast in stainless steel pencils, to be used as source pencils of 300 Ci strength for blood irradiation. An induction heated metallic melter of suitable capacity has been custom designed for the application and employed for the Cs-137 pencil fabrication facility. This article describes various systems, design features, experiments and resulting modifications, observations and remote handling features necessary for the actual operation of such facility. The layout of the facility has been planned in such a way that the same can be adopted in a hot cell for commercial production of source pencils. (authors)« less

Personalized Risk Estimator for Rheumatoid Arthritis (PRE-RA) Family Study: Rationale and design for a randomized controlled trial evaluating rheumatoid arthritis risk education to first-degree relatives

PubMed Central

Sparks, Jeffrey A.; Iversen, Maura D.; Kroouze, Rachel Miller; Mahmoud, Taysir G.; Triedman, Nellie A.; Kalia, Sarah S.; Atkinson, Michael L.; Lu, Bing; Deane, Kevin D.; Costenbader, Karen H.; Green, Robert C.; Karlson, Elizabeth W.

2014-01-01

We present the rationale, design features, and protocol of the Personalized Risk Estimator for Rheumatoid Arthritis (PRE-RA) Family Study (ClinicalTrials.gov NCT02046005). The PRE-RA Family Study is an NIH-funded prospective, randomized controlled trial designed to compare the willingness to change behaviors in first-degree relatives of rheumatoid arthritis (RA) patients without RA after exposure to RA risk educational programs. Consented subjects are randomized to receive education concerning their personalized RA risk based on demographics, RA-associated behaviors, genetics and biomarkers or to receive standard RA information. Four behavioral factors associated with RA risk were identified from prior studies for inclusion in the risk estimate: cigarette smoking, excess body weight, poor oral health, and low fish intake. Personalized RA risk information is presented through an online tool that collects data on an individual's specific age, gender, family history, and risk-related behaviors; presents genetic and biomarker results; displays relative and absolute risk of RA; and provides personalized feedback and education. The trial outcomes will be changes in willingness to alter behaviors from baseline to 6 weeks, 6 months, and 12 months in the three intervention groups. The design and execution of this trial that targets a special population at risk for RA, while incorporating varied risk factors into a single risk tool, offer distinct challenges. We provide the theoretical rationale for the PRE-RA Family Study and highlight particular design features of this trial that utilize personalized risk education as an intervention. PMID:25151341

45 CFR 670.25 - Designation of specially protected species of native mammals, birds, and plants.

Code of Federal Regulations, 2010 CFR

2010-10-01

... native mammals, birds, and plants. 670.25 Section 670.25 Public Welfare Regulations Relating to Public... Protected Species of Mammals, Birds, and Plants § 670.25 Designation of specially protected species of native mammals, birds, and plants. The following species has been designated as Specially Protected...

45 CFR 670.25 - Designation of specially protected species of native mammals, birds, and plants.

Code of Federal Regulations, 2011 CFR

2011-10-01

... native mammals, birds, and plants. 670.25 Section 670.25 Public Welfare Regulations Relating to Public... Protected Species of Mammals, Birds, and Plants § 670.25 Designation of specially protected species of native mammals, birds, and plants. The following species has been designated as Specially Protected...

Designs for Organizing and Administering Special Education; Proceedings of a Cooperative Work-Conference (Atwood Lodge, Dellroy, Ohio, May 9-10, 1968).

ERIC Educational Resources Information Center

Birch, Jack W., Ed.

Papers included are the following: design for organizing and administering special education by Paul R. Ackerman and William C. Geer; indications of patterns and trends in special education, by Marvin E. Beekman; the organization of special education services, by John W. Kidd; and organization and administration of special education, by Harrie M.…

78 FR 16828 - Endangered and Threatened Wildlife and Plants; Status Review of the West Coast Distinct...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-19

...; biology and ecology; and habitat selection. (2) Information on the effects of potential threat factors... particular physical or biological features that are essential to the conservation of the species and where such physical or biological features are found; (c) Whether any of these features may require special...

The Special Features of the Deformation Behavior of an Ultrafine-Grained Aluminum Alloy of the Al-Mg-Li System at Room Temperature

NASA Astrophysics Data System (ADS)

Naydenkin, E. V.; Mishin, I. P.; Ivanov, K. V.

2015-04-01

The special features of the deformation behavior of an ultrafine-grained aluminum alloy produced by severe plastic deformation are investigated. Unlike ultrafine-grained pure aluminum, the second-phase particles precipitated in the bulk and at the grain boundaries of the alloy are shown to hinder the development of grain boundary sliding and plastic strain localization. This increases the length of the strain hardening stage and uniformity of elongation of a heterogeneous aluminum alloy specimen as compared to pure aluminum.

High-Fidelity Roadway Modeling and Simulation

NASA Technical Reports Server (NTRS)

Wang, Jie; Papelis, Yiannis; Shen, Yuzhong; Unal, Ozhan; Cetin, Mecit

2010-01-01

Roads are an essential feature in our daily lives. With the advances in computing technologies, 2D and 3D road models are employed in many applications, such as computer games and virtual environments. Traditional road models were generated by professional artists manually using modeling software tools such as Maya and 3ds Max. This approach requires both highly specialized and sophisticated skills and massive manual labor. Automatic road generation based on procedural modeling can create road models using specially designed computer algorithms or procedures, reducing the tedious manual editing needed for road modeling dramatically. But most existing procedural modeling methods for road generation put emphasis on the visual effects of the generated roads, not the geometrical and architectural fidelity. This limitation seriously restricts the applicability of the generated road models. To address this problem, this paper proposes a high-fidelity roadway generation method that takes into account road design principles practiced by civil engineering professionals, and as a result, the generated roads can support not only general applications such as games and simulations in which roads are used as 3D assets, but also demanding civil engineering applications, which requires accurate geometrical models of roads. The inputs to the proposed method include road specifications, civil engineering road design rules, terrain information, and surrounding environment. Then the proposed method generates in real time 3D roads that have both high visual and geometrical fidelities. This paper discusses in details the procedures that convert 2D roads specified in shape files into 3D roads and civil engineering road design principles. The proposed method can be used in many applications that have stringent requirements on high precision 3D models, such as driving simulations and road design prototyping. Preliminary results demonstrate the effectiveness of the proposed method.

Analysis of Cryogenic Cycle with Process Modeling Tool: Aspen HYSYS

NASA Astrophysics Data System (ADS)

Joshi, D. M.; Patel, H. K.

2015-10-01

Cryogenic engineering deals with the development and improvement of low temperature techniques, processes and equipment. A process simulator such as Aspen HYSYS, for the design, analysis, and optimization of process plants, has features that accommodate the special requirements and therefore can be used to simulate most cryogenic liquefaction and refrigeration processes. Liquefaction is the process of cooling or refrigerating a gas to a temperature below its critical temperature so that liquid can be formed at some suitable pressure which is below the critical pressure. Cryogenic processes require special attention in terms of the integration of various components like heat exchangers, Joule-Thompson Valve, Turbo expander and Compressor. Here, Aspen HYSYS, a process modeling tool, is used to understand the behavior of the complete plant. This paper presents the analysis of an air liquefaction plant based on the Linde cryogenic cycle, performed using the Aspen HYSYS process modeling tool. It covers the technique used to find the optimum values for getting the maximum liquefaction of the plant considering different constraints of other parameters. The analysis result so obtained gives clear idea in deciding various parameter values before implementation of the actual plant in the field. It also gives an idea about the productivity and profitability of the given configuration plant which leads to the design of an efficient productive plant.

Quantification and characterization of volatiles evolved during extrusion of rice and soy flours.

PubMed

Vodovotz, Y; Zasypkin, D; Lertsiriyothin, W; Lee, T C; Bourland, C T

2000-01-01

NASA-Johnson Space Center is designing and building a habitat (Bioregenerative Planetary Life Support Systems Test Complex, BIO-Plex) intended for evaluating advanced life support systems developed for long-duration missions to the Moon or Mars where all consumables will be recycled and reused. A food system based on raw products obtained from higher plants (such as soybeans, rice, and wheat) may be a central feature of a biologically based Advanced Life Support System. To convert raw crops to edible ingredients or food items, multipurpose processing equipment such as an extruder is ideal. Volatile compounds evolved during the manufacturing of these food products may accumulate and reach toxic levels. Additionally, off-odors often dissipated in open-air environments without consequence may cause significant discomfort in the BIO-Plex. Rice and defatted soy flours were adjusted to 16% moisture, and triplicate samples were extruded using a tabletop single-screw extruder. The extrudate was collected in specially designed Tedlar bags from which air samples could be extracted. The samples were analyzed by GC-MS with special emphasis on compounds with Spacecraft Maximum Allowable Concentrations (SMACs). Results showed a combination of alcohols, aldehydes, ketones, and carbonyl compounds in the different flours. Each compound and its SMAC value, as well as its impact on the air revitalization system, was discussed.

Quantification and characterization of volatiles evolved during extrusion of rice and soy flours

NASA Technical Reports Server (NTRS)

Vodovotz, Y.; Zasypkin, D.; Lertsiriyothin, W.; Lee, T. C.; Bourland, C. T.

2000-01-01

NASA-Johnson Space Center is designing and building a habitat (Bioregenerative Planetary Life Support Systems Test Complex, BIO-Plex) intended for evaluating advanced life support systems developed for long-duration missions to the Moon or Mars where all consumables will be recycled and reused. A food system based on raw products obtained from higher plants (such as soybeans, rice, and wheat) may be a central feature of a biologically based Advanced Life Support System. To convert raw crops to edible ingredients or food items, multipurpose processing equipment such as an extruder is ideal. Volatile compounds evolved during the manufacturing of these food products may accumulate and reach toxic levels. Additionally, off-odors often dissipated in open-air environments without consequence may cause significant discomfort in the BIO-Plex. Rice and defatted soy flours were adjusted to 16% moisture, and triplicate samples were extruded using a tabletop single-screw extruder. The extrudate was collected in specially designed Tedlar bags from which air samples could be extracted. The samples were analyzed by GC-MS with special emphasis on compounds with Spacecraft Maximum Allowable Concentrations (SMACs). Results showed a combination of alcohols, aldehydes, ketones, and carbonyl compounds in the different flours. Each compound and its SMAC value, as well as its impact on the air revitalization system, was discussed.

Visual readability analysis: how to make your writings easier to read.

PubMed

Oelke, Daniela; Spretke, David; Stoffel, Andreas; Keim, Daniel A

2012-05-01

We present a tool that is specifically designed to support a writer in revising a draft version of a document. In addition to showing which paragraphs and sentences are difficult to read and understand, we assist the reader in understanding why this is the case. This requires features that are expressive predictors of readability, and are also semantically understandable. In the first part of the paper, we, therefore, discuss a semiautomatic feature selection approach that is used to choose appropriate measures from a collection of 141 candidate readability features. In the second part, we present the visual analysis tool VisRA, which allows the user to analyze the feature values across the text and within single sentences. Users can choose between different visual representations accounting for differences in the size of the documents and the availability of information about the physical and logical layout of the documents. We put special emphasis on providing as much transparency as possible to ensure that the user can purposefully improve the readability of a sentence. Several case studies are presented that show the wide range of applicability of our tool. Furthermore, an in-depth evaluation assesses the quality of the measure and investigates how well users do in revising a text with the help of the tool.

Enhancing the discrimination accuracy between metastases, gliomas and meningiomas on brain MRI by volumetric textural features and ensemble pattern recognition methods.

PubMed

Georgiadis, Pantelis; Cavouras, Dionisis; Kalatzis, Ioannis; Glotsos, Dimitris; Athanasiadis, Emmanouil; Kostopoulos, Spiros; Sifaki, Koralia; Malamas, Menelaos; Nikiforidis, George; Solomou, Ekaterini

2009-01-01

Three-dimensional (3D) texture analysis of volumetric brain magnetic resonance (MR) images has been identified as an important indicator for discriminating among different brain pathologies. The purpose of this study was to evaluate the efficiency of 3D textural features using a pattern recognition system in the task of discriminating benign, malignant and metastatic brain tissues on T1 postcontrast MR imaging (MRI) series. The dataset consisted of 67 brain MRI series obtained from patients with verified and untreated intracranial tumors. The pattern recognition system was designed as an ensemble classification scheme employing a support vector machine classifier, specially modified in order to integrate the least squares features transformation logic in its kernel function. The latter, in conjunction with using 3D textural features, enabled boosting up the performance of the system in discriminating metastatic, malignant and benign brain tumors with 77.14%, 89.19% and 93.33% accuracy, respectively. The method was evaluated using an external cross-validation process; thus, results might be considered indicative of the generalization performance of the system to "unseen" cases. The proposed system might be used as an assisting tool for brain tumor characterization on volumetric MRI series.

Drafting standards on cognitive accessibility: a global collaboration.

PubMed

Steel, Emily J; Janeslätt, Gunnel

2017-05-01

The International Organization for Standardization (ISO) is working on accessibility of products to support people with cognitive impairment. Working Group 10, within the technical committee 173 (assistive products for persons with disability) was formed in 2014 to draft standards for assistive products that support people with cognitive impairment. This article explains the scope and purpose of the working group and the context for its formation, and describes the plans and process for drafting and publishing new international standards. The proposed suite of standards is presented, with examples from a draft standard on daily time management. It draws on international research evidence for the effectiveness of assistive products designed to support time management in people with cognitive impairment. Examples of assistive products and their key features are provided based on domains of time as defined in the International Classification of Functioning, Disability and Health for Children and Youth (ICF-CY). The proposed standards will provide design recommendations for features and functions that increase the accessibility of products used by people with cognitive impairment. They are intended to be used by designers, manufactures, educators and services providers, to facilitate their commitment to inclusion and demonstrate their willingness to work with accessibility regulation. Implications for Rehabilitation New standards based on universal design (UD) principles can guide the design of more user-friendly assistive products for people with cognitive impairment. Greater usability of assistive products, whether mainstream or specially-designed, will make it easier for practitioners to find and introduce assistive solutions to individuals with cognitive impairment. Greater usability of assistive products for daily time management can decrease the need for user training and support and enable participation.

Design of a Software Configuration for Real-Time Multimedia Group Communication; HNUMTP

NASA Astrophysics Data System (ADS)

Park, Gil-Cheol

This paper designs transport protocol of multi-session/channel method for real time multimedia group telecommunication and realizes it. The special features of the designed and realized protocol are first, that it solved the sync problem which is the specific character of multimedia telecommunication by using multi-channel method protocol. Usual multimedia telecommunication is assigned one channel by each media data. This paper shortened the phenomenon that waits data for sync of receiving part by assigning more than one channel for the channel that has a lot of data per hour as video data. The problem of intermedia synchronization that happens then could be solved by sending temporal/spacial related data among data assigning extra control channel. Second, that it does integrated management for sessions. Each session is one group telecommunication unit which supports mutual working environment that is independent. Each session communicates the participants in the group independently, the session manager manages all the communication among groups and lets media sources connected with all network be operated efficiently.

Physics and Engineering Design of the ITER Electron Cyclotron Emission Diagnostic

NASA Astrophysics Data System (ADS)

Rowan, W. L.; Austin, M. E.; Houshmandyar, S.; Phillips, P. E.; Beno, J. H.; Ouroua, A.; Weeks, D. A.; Hubbard, A. E.; Stillerman, J. A.; Feder, R. E.; Khodak, A.; Taylor, G.; Pandya, H. K.; Danani, S.; Kumar, R.

2015-11-01

Electron temperature (Te) measurements and consequent electron thermal transport inferences will be critical to the non-active phases of ITER operation and will take on added importance during the alpha heating phase. Here, we describe our design for the diagnostic that will measure spatial and temporal profiles of Te using electron cyclotron emission (ECE). Other measurement capability includes high frequency instabilities (e.g. ELMs, NTMs, and TAEs). Since results from TFTR and JET suggest that Thomson Scattering and ECE differ at high Te due to driven non-Maxwellian distributions, non-thermal features of the ITER electron distribution must be documented. The ITER environment presents other challenges including space limitations, vacuum requirements, and very high-neutron-fluence. Plasma control in ITER will require real-time Te. The diagnosic design that evolved from these sometimes-conflicting needs and requirements will be described component by component with special emphasis on the integration to form a single effective diagnostic system. Supported by PPPL/US-DA via subcontract S013464-C to UT Austin.

New frontiers in building mental, emotional and behavioral health in children and youth: Introduction to the special section.

PubMed

Evans, Mary E; Bruns, Eric J; Armstrong, Mary I; Hodges, Sharon; Hernandez, Mario

2016-03-01

The passage of the Patient Protection and Affordable Care Act (ACA; 2010) has had tremendous influence on behavioral health in the United States (Alker & Chester, 2015). Shortly after its passage, the editors of this special section became interested in examining the provisions of the ACA related to care for mental, emotional, and behavioral disorders in children and youth and synthesizing their implications in the context of other contemporary trends in children's behavioral health promotion. We first developed a white paper with the goal of increasing our own understanding of these issues and their possible influence on the status quo of designing, implementing, financing, and evaluating behavioral health services for children and their families. From our discussions came the idea of developing a special section in the American Journal of Orthopsychiatry featuring input from researchers who have been exploring these issues and who have tangible and relevant examples of "new frontiers" in building mental, emotional, and behavioral health for children and youth. The result is the current special section, the purpose of which is to highlight the importance of prevention in behavioral health and to explore examples of efforts that have used a broad public health approach to prevention and early intervention in mental, emotional, and substance use disorders in children and youth. Before introducing the seven articles in this special section, we describe in detail our foundational thinking about building mental, emotional, and behavioral health for children and youth, as expressed in our initial white paper on this topic. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Using CNN Features to Better Understand What Makes Visual Artworks Special.

PubMed

Brachmann, Anselm; Barth, Erhardt; Redies, Christoph

2017-01-01

One of the goal of computational aesthetics is to understand what is special about visual artworks. By analyzing image statistics, contemporary methods in computer vision enable researchers to identify properties that distinguish artworks from other (non-art) types of images. Such knowledge will eventually allow inferences with regard to the possible neural mechanisms that underlie aesthetic perception in the human visual system. In the present study, we define measures that capture variances of features of a well-established Convolutional Neural Network (CNN), which was trained on millions of images to recognize objects. Using an image dataset that represents traditional Western, Islamic and Chinese art, as well as various types of non-art images, we show that we need only two variance measures to distinguish between the artworks and non-art images with a high classification accuracy of 93.0%. Results for the first variance measure imply that, in the artworks, the subregions of an image tend to be filled with pictorial elements, to which many diverse CNN features respond ( richness of feature responses). Results for the second measure imply that this diversity is tied to a relatively large variability of the responses of individual CNN feature across the subregions of an image. We hypothesize that this combination of richness and variability of CNN feature responses is one of properties that makes traditional visual artworks special. We discuss the possible neural underpinnings of this perceptual quality of artworks and propose to study the same quality also in other types of aesthetic stimuli, such as music and literature.

Recurrent neural networks with specialized word embeddings for health-domain named-entity recognition.

PubMed

Jauregi Unanue, Iñigo; Zare Borzeshi, Ehsan; Piccardi, Massimo

2017-12-01

Previous state-of-the-art systems on Drug Name Recognition (DNR) and Clinical Concept Extraction (CCE) have focused on a combination of text "feature engineering" and conventional machine learning algorithms such as conditional random fields and support vector machines. However, developing good features is inherently heavily time-consuming. Conversely, more modern machine learning approaches such as recurrent neural networks (RNNs) have proved capable of automatically learning effective features from either random assignments or automated word "embeddings". (i) To create a highly accurate DNR and CCE system that avoids conventional, time-consuming feature engineering. (ii) To create richer, more specialized word embeddings by using health domain datasets such as MIMIC-III. (iii) To evaluate our systems over three contemporary datasets. Two deep learning methods, namely the Bidirectional LSTM and the Bidirectional LSTM-CRF, are evaluated. A CRF model is set as the baseline to compare the deep learning systems to a traditional machine learning approach. The same features are used for all the models. We have obtained the best results with the Bidirectional LSTM-CRF model, which has outperformed all previously proposed systems. The specialized embeddings have helped to cover unusual words in DrugBank and MedLine, but not in the i2b2/VA dataset. We present a state-of-the-art system for DNR and CCE. Automated word embeddings has allowed us to avoid costly feature engineering and achieve higher accuracy. Nevertheless, the embeddings need to be retrained over datasets that are adequate for the domain, in order to adequately cover the domain-specific vocabulary. Copyright © 2017 Elsevier Inc. All rights reserved.

Using CNN Features to Better Understand What Makes Visual Artworks Special

PubMed Central

Brachmann, Anselm; Barth, Erhardt; Redies, Christoph

2017-01-01

One of the goal of computational aesthetics is to understand what is special about visual artworks. By analyzing image statistics, contemporary methods in computer vision enable researchers to identify properties that distinguish artworks from other (non-art) types of images. Such knowledge will eventually allow inferences with regard to the possible neural mechanisms that underlie aesthetic perception in the human visual system. In the present study, we define measures that capture variances of features of a well-established Convolutional Neural Network (CNN), which was trained on millions of images to recognize objects. Using an image dataset that represents traditional Western, Islamic and Chinese art, as well as various types of non-art images, we show that we need only two variance measures to distinguish between the artworks and non-art images with a high classification accuracy of 93.0%. Results for the first variance measure imply that, in the artworks, the subregions of an image tend to be filled with pictorial elements, to which many diverse CNN features respond (richness of feature responses). Results for the second measure imply that this diversity is tied to a relatively large variability of the responses of individual CNN feature across the subregions of an image. We hypothesize that this combination of richness and variability of CNN feature responses is one of properties that makes traditional visual artworks special. We discuss the possible neural underpinnings of this perceptual quality of artworks and propose to study the same quality also in other types of aesthetic stimuli, such as music and literature. PMID:28588537

45 CFR 670.29 - Designation of Antarctic Specially Protected Areas, Specially Managed Areas and Historic Sites...

Code of Federal Regulations, 2011 CFR

2011-10-01

... for special management and are hereby designated as Antarctic Specially Managed Areas (ASMA). Detailed..., Arlington, Virginia 22230. ASMA 1Admiralty Bay, King George Island, South Shetland Islands ASMA 2McMurdo Dry Valleys, Southern Victoria Land ASMA 3Cape Denison, Commonwealth Bay, George V Land ASMA 4Deception Island...

45 CFR 670.29 - Designation of Antarctic Specially Protected Areas, Specially Managed Areas and Historic Sites...

Code of Federal Regulations, 2010 CFR

2010-10-01

... for special management and are hereby designated as Antarctic Specially Managed Areas (ASMA). Detailed..., Arlington, Virginia 22230. ASMA 1Admiralty Bay, King George Island, South Shetland Islands ASMA 2McMurdo Dry Valleys, Southern Victoria Land ASMA 3Cape Denison, Commonwealth Bay, George V Land ASMA 4Deception Island...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butler, T.; Curtis, O.; Stephenson, R.

As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta-based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA, in the mixed humid climate. This home serves as a residence and home office for the firm's owners, as well as a demonstration of their design approach to potential and current clients. Southface believes the home demonstrates current best practices for the mixed-humid climate, including a building envelope featuring advanced air sealing details and low density spray foam insulation, glazing that exceeds ENERGY STARmore » requirements, and a high performance heating and cooling system. Construction quality and execution was a high priority for TaC Studios and was ensured by a third party review process. Post-construction testing showed that the project met stated goals for envelope performance, an air infiltration rate of 2.15 ACH50. The homeowners wished to further validate whole house energy savings through the project's involvement with Building America and this long-term monitoring effort. As a Building America test home, this home was evaluated to detail whole house energy use, end use loads, and the efficiency and operation of the ground source heat pump and associated systems. Given that the home includes many non-typical end use loads including a home office, pool, landscape water feature, and other luxury features not accounted for in Building America modeling tools, these end uses were separately monitored to determine their impact on overall energy consumption.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butler, T.; Curtis, O.; Stephenson, R.

As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta-based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA in the mixed humid climate. This home serves as a residence and home office for the firm's owners, as well as a demonstration of their design approach topotential and current clients. Southface believes the home demonstrates current best practices for the mixed-humid climate, including a building envelope featuring advanced air sealing details and low density spray foam insulation, glazing that exceeds ENERGY STAR requirements,more » and a high performance heating and cooling system. Construction quality and execution was a high priority for TaCStudios and was ensured by a third party review process. Post-construction testing showed that the project met stated goals for envelope performance, an air infiltration rate of 2.15 ACH50. The homeowners wished to further validate whole house energy savings through the project's involvement with Building America and this long-term monitoring effort. As a Building America test home, this homewas evaluated to detail whole house energy use, end use loads, and the efficiency and operation of the ground source heat pump and associated systems. Given that the home includes many non-typical end use loads including a home office, pool, landscape water feature, and other luxury features not accounted for in Building America modeling tools, these end uses were separately monitored todetermine their impact on overall energy consumption.« less

SeCD electronic folder: CADMIO's application for the medical folder of a service for the care of drug addicts.

PubMed

Della Valle, R M; Baldoni, A; De Rossi, M; Ferri, F

1998-01-01

In this paper we will describe the SeCD (Service for the Care of Drug addicts) electronic folder, a specific application of CADMIO [1] (Computer Aided Design for Medical Information Objects) system. CADMIO is a system for the definition, construction and management of multimedia clinical folders. The Ser.T. (Servizio per la Tossicodipendenza/Service for Drug Addicts) has earned a very special place within the Italian clinical structures as well as any service for drug addicts has done in the rest of the world. Such a structure has special needs and the characteristics of its medical folders are very different from any other folder. Actually, a Ser.T. has to keep updated the patient situation either from the clinical point of view as well as the psychiatric one. Moreover, it must keep track of the clinician subjective considerations about the patient psychic state and his situation in regard of the law. So, we had to redesign some of the features of the existing CADMIO application, to accommodate such highly not structured data into objects easily manipulated by an informative system. The objectives we hope to achieve were mainly two: To show that a well designed adaptive system can be easily exploited to support even very complex and poorly structured data types and actions To design data structures able to accommodate medical, psychiatric and administrative data in an homogeneous manner.

Open Up Your Newspaper with Advertising.

ERIC Educational Resources Information Center

Spielberger, Ronald E.

1980-01-01

Suggests ways the business office of a student newspaper can ease the conflicts between news and advertising space, including: raising advertising rates, selling ads only in uniform sizes, charging extra for premium space, selling special features, and selling space around a monthly calendar of special events. (TJ)

Wildlife habitats in managed rangelands—the Great Basin of southeastern Oregon: manmade habitats.

Treesearch

Chris Maser; Jack Ward Thomas; Ira David Luman; Ralph. Anderson

1979-01-01

Manmade structures on rangelands provide specialized habitats for some species. These habitats and how they function as specialized habitat features are examined in this publication. The relationships of the wildlife of the Great Basin to such structures are detailed.

OIL SPILL RESPONSE SCENARIOS FOR REMOTE ARCTIC ENVIRONMENTS

EPA Science Inventory

Special problems occur during oil spill cleanup in remote inland areas in cold climates. In Alaska these problems result from the harsh climate, the unusual terrain features, and the special problems of spills along swift rivers. The analysis begins with a description of the envi...

Interpersonal and Affective Features of Psychopathy in Children and Adolescents: Advancing a Developmental Perspective--Introduction to Special Section

ERIC Educational Resources Information Center

Pardini, Dustin A.; Loeber, Rolf

2007-01-01

The interpersonal (e.g., manipulative, deceitful) and affective (e.g., callous, unemotional) features associated with adult psychopathy have been identified in children and adolescents. Although early research suggests that these features have clinical utility in identifying a particularly severe and recalcitrant form of antisocial behavior with…

Design complexity in termite-fishing tools of chimpanzees (Pan troglodytes)

PubMed Central

Sanz, Crickette; Call, Josep; Morgan, David

2009-01-01

Adopting the approach taken with New Caledonian crows (Corvus moneduloides), we present evidence of design complexity in one of the termite-fishing tools of chimpanzees (Pan troglodytes) in the Goualougo Triangle, Republic of Congo. Prior to termite fishing, chimpanzees applied a set of deliberate, distinguishable actions to modify herb stems to fashion a brush-tipped probe, which is different from the form of fishing tools used by chimpanzees in East and West Africa. This means that ‘brush-tipped fishing probes’, unlike ‘brush sticks’, are not a by-product of use but a deliberate design feature absent in other chimpanzee populations. The specialized modifications to prepare the tool for termite fishing, measures taken to repair non-functional brushes and appropriate orientation of the modified end suggest that these wild chimpanzees are attentive to tool modifications. We also conducted experimental trials that showed that a brush-tipped probe is more effective in gathering insects than an unmodified fishing probe. Based on these findings, we suggest that chimpanzees in the Congo Basin have developed an improved fishing probe design. PMID:19324641

Synthetic Biology Open Language (SBOL) Version 2.1.0.

PubMed

Beal, Jacob; Cox, Robert Sidney; Grünberg, Raik; McLaughlin, James; Nguyen, Tramy; Bartley, Bryan; Bissell, Michael; Choi, Kiri; Clancy, Kevin; Macklin, Chris; Madsen, Curtis; Misirli, Goksel; Oberortner, Ernst; Pocock, Matthew; Roehner, Nicholas; Samineni, Meher; Zhang, Michael; Zhang, Zhen; Zundel, Zach; Gennari, John H; Myers, Chris; Sauro, Herbert; Wipat, Anil

2016-09-01

Synthetic biology builds upon the techniques and successes of genetics, molecular biology, and metabolic engineering by applying engineering principles to the design of biological systems. The field still faces substantial challenges, including long development times, high rates of failure, and poor reproducibility. One method to ameliorate these problems would be to improve the exchange of information about designed systems between laboratories. The Synthetic Biology Open Language (SBOL) has been developed as a standard to support the specification and exchange of biological design information in synthetic biology, filling a need not satisfied by other pre-existing standards. This document details version 2.1 of SBOL that builds upon version 2.0 published in last year's JIB special issue. In particular, SBOL 2.1 includes improved rules for what constitutes a valid SBOL document, new role fields to simplify the expression of sequence features and how components are used in context, and new best practices descriptions to improve the exchange of basic sequence topology information and the description of genetic design provenance, as well as miscellaneous other minor improvements.

Synthetic Biology Open Language (SBOL) Version 2.1.0.

PubMed

Beal, Jacob; Cox, Robert Sidney; Grünberg, Raik; McLaughlin, James; Nguyen, Tramy; Bartley, Bryan; Bissell, Michael; Choi, Kiri; Clancy, Kevin; Macklin, Chris; Madsen, Curtis; Misirli, Goksel; Oberortner, Ernst; Pocock, Matthew; Roehner, Nicholas; Samineni, Meher; Zhang, Michael; Zhang, Zhen; Zundel, Zach; Gennari, John; Myers, Chris; Sauro, Herbert; Wipat, Anil

2016-12-18

Synthetic biology builds upon the techniques and successes of genetics, molecular biology, and metabolic engineering by applying engineering principles to the design of biological systems. The field still faces substantial challenges, including long development times, high rates of failure, and poor reproducibility. One method to ameliorate these problems would be to improve the exchange of information about designed systems between laboratories. The Synthetic Biology Open Language (SBOL) has been developed as a standard to support the specification and exchange of biological design information in synthetic biology, filling a need not satisfied by other pre-existing standards. This document details version 2.1 of SBOL that builds upon version 2.0 published in last year’s JIB special issue. In particular, SBOL 2.1 includes improved rules for what constitutes a valid SBOL document, new role fields to simplify the expression of sequence features and how components are used in context, and new best practices descriptions to improve the exchange of basic sequence topology information and the description of genetic design provenance, as well as miscellaneous other minor improvements.

15 CFR 744.12 - Restrictions on exports and reexports to persons designated in or pursuant to Executive Order...

Code of Federal Regulations, 2014 CFR

2014-01-01

... to persons designated in or pursuant to Executive Order 13224 (Specially Designated Global Terrorist... persons designated in or pursuant to Executive Order 13224 (Specially Designated Global Terrorist) (SDGT... part 594, the Global Terrorism Sanctions Regulations. OFAC announces the names of persons designated...

15 CFR 744.12 - Restrictions on exports and reexports to persons designated in or pursuant to Executive Order...

Code of Federal Regulations, 2011 CFR

2011-01-01

... to persons designated in or pursuant to Executive Order 13224 (Specially Designated Global Terrorist... persons designated in or pursuant to Executive Order 13224 (Specially Designated Global Terrorist) (SDGT... part 594, the Global Terrorism Sanctions Regulations. OFAC announces the names of persons designated...

15 CFR 744.12 - Restrictions on exports and reexports to persons designated in or pursuant to Executive Order...

Code of Federal Regulations, 2013 CFR

2013-01-01

... to persons designated in or pursuant to Executive Order 13224 (Specially Designated Global Terrorist... persons designated in or pursuant to Executive Order 13224 (Specially Designated Global Terrorist) (SDGT... part 594, the Global Terrorism Sanctions Regulations. OFAC announces the names of persons designated...

15 CFR 744.12 - Restrictions on exports and reexports to persons designated in or pursuant to Executive Order...

Code of Federal Regulations, 2012 CFR

2012-01-01

... to persons designated in or pursuant to Executive Order 13224 (Specially Designated Global Terrorist... persons designated in or pursuant to Executive Order 13224 (Specially Designated Global Terrorist) (SDGT... part 594, the Global Terrorism Sanctions Regulations. OFAC announces the names of persons designated...

Specialized family care for children with developmental disabilities: the Finnish experience.

PubMed

Szymanski, L S; Seppala, H T

1995-01-01

This article describes features of Finland's specialized family care for children with disabilities, including professionalization and training of foster parents and the establishment of municipal employee-like status for them, long-term placements, and the preservation of relationships with biological families whenever possible. A case example of a 12-year-old child with mental retardation and autistic disorder who is in specialized care is included.

Do You Want to Make a Difference in the Lives of Students with Special Needs? Careers in Special Education and Related Services.

ERIC Educational Resources Information Center

National Clearinghouse for Professions in Special Education, Reston, VA.

Designed for high school students interested in careers in special education and related services, this guide outlines the different roles of special education and related services professionals who teach and provide specifically designed instruction and services to children with disabilities. It addresses the different disabilities that students…

Mental exercising through simple socializing: social interaction promotes general cognitive functioning.

PubMed

Ybarra, Oscar; Burnstein, Eugene; Winkielman, Piotr; Keller, Matthew C; Manis, Melvin; Chan, Emily; Rodriguez, Joel

2008-02-01

Social interaction is a central feature of people's life and engages a variety of cognitive resources. Thus, social interaction should facilitate general cognitive functioning. Previous studies suggest such a link, but they used special populations (e.g., elderly with cognitive impairment), measured social interaction indirectly (e.g., via marital status), and only assessed effects of extended interaction in correlational designs. Here the relation between mental functioning and direct indicators of social interaction was examined in a younger and healthier population. Study 1 using survey methodology found a positive relationship between social interaction, assessed via amount of actual social contact, and cognitive functioning in people from three age groups including younger adults. Study 2 using an experimental design found that a small amount of social interaction (10 min) can facilitate cognitive performance. The findings are discussed in the context of the benefits social relationships have for so many aspects of people's lives.

Hydrogel scaffolds for tissue engineering: Progress and challenges

PubMed Central

El-Sherbiny, Ibrahim M.; Yacoub, Magdi H.

2013-01-01

Designing of biologically active scaffolds with optimal characteristics is one of the key factors for successful tissue engineering. Recently, hydrogels have received a considerable interest as leading candidates for engineered tissue scaffolds due to their unique compositional and structural similarities to the natural extracellular matrix, in addition to their desirable framework for cellular proliferation and survival. More recently, the ability to control the shape, porosity, surface morphology, and size of hydrogel scaffolds has created new opportunities to overcome various challenges in tissue engineering such as vascularization, tissue architecture and simultaneous seeding of multiple cells. This review provides an overview of the different types of hydrogels, the approaches that can be used to fabricate hydrogel matrices with specific features and the recent applications of hydrogels in tissue engineering. Special attention was given to the various design considerations for an efficient hydrogel scaffold in tissue engineering. Also, the challenges associated with the use of hydrogel scaffolds were described. PMID:24689032

SCORPI and SCORPI-T: Neurophysiological experiments on animals in space

NASA Astrophysics Data System (ADS)

Serafini, L.; Ramacciotti, T.; Vigano, W.; Donati, A.; Porciani, M.; Zolesi, V.; Schulze-Varnholt, D.; Manieri, P.; El-Din Sallam, A.; Schmah, M.; Horn, E. R.

2005-08-01

The study of physiological adaptation to long-term space flights with special consideration of the internal clock systems of scorpions is the goal of the SCORPI and SCORPI-T experiments. SCORPI was selected for flight on the International Space Station (ISS) and will be mounted in the European facility BIOLAB, the ESA laboratory designed to support biological experiments on micro-organisms, cells, tissue, cultures, small plants and small invertebrates. SCORPI-T experiment, performed on the Russian FOTON-M2 satellite in May-June 2005, represents an important precursor for the success of the experiment SCORPI on BIOLAB. This paper outlines the main features of the hardware designed and developed in order to allow the analysis of critical aspects of experiment execution and the verification of experiment objectives. The capabilities of the hardware developed for SCORPI and SCORPI-T show its potential use for any future similar type of experiments in space.

Commercialisation of Solid Oxide Fuel Cells - opportunities and forecasts

NASA Astrophysics Data System (ADS)

Dziurdzia, B.; Magonski, Z.; Jankowski, H.

2016-01-01

The paper presents the analysis of commercialisation possibilities of the SOFC stack designed at AGH. The paper reminds the final design of the stack, presented earlier at IMAPS- Poland conferences, its recent modifications and measurements. The stack consists of planar double-sided ceramic fuel cells which characterize by the special anode construction with embedded fuel channels. The stack features by a simple construction without metallic interconnectors and frames, lowered thermal capacity and quick start-up time. Predictions for the possible applications of the stack include portable generators for luxurious caravans, yachts, ships at berth. The SOFC stack operating as clean, quiet and efficient power source could replace on-board diesel generators. Market forecasts shows that there is also some room on a market for the SOFC stack as a standalone generator in rural areas far away from the grid. The paper presents also the survey of SOFC market in Europe USA, Australia and other countries.

Evaluation of Veda, Inc. , central receiver solar collection system concept

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ator, J.

1981-08-01

The Unified Heliostat Array (UHA) is a geometrical heliostat field layout with rows of mirrors placed at various levels on terraces. The Veda Industrial Heliostat (VIH) is a toroidal segment mirror mounted on an equatorial mount. These two concepts are evaluated to assess the credibility of the optical designs and the validity of UHA and VIH performance estimates, to determine what the distinctive features embodied in UHA AND VIH concepts offer that more conventional central receiver technologies do not, and to determine where the UHA and VIH concepts might be most applicable in DOE's Solar Thermal Program. The UHA areamore » efficiency, flux density distribution, and beam safety are evaluated, and the feasibility of using a secondary mirror and the potential for special applications are assessed. The optical design, equatorial mount, and manufacturability of the VIH are evaluated. (LEW)« less

Flexible sample environment for high resolution neutron imaging at high temperatures in controlled atmosphere

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makowska, Małgorzata G.; Theil Kuhn, Luise; Cleemann, Lars N.

In high material penetration by neutrons allows for experiments using sophisticated sample environments providing complex conditions. Thus, neutron imaging holds potential for performing in situ nondestructive measurements on large samples or even full technological systems, which are not possible with any other technique. Our paper presents a new sample environment for in situ high resolution neutron imaging experiments at temperatures from room temperature up to 1100 degrees C and/or using controllable flow of reactive atmospheres. The design also offers the possibility to directly combine imaging with diffraction measurements. Design, special features, and specification of the furnace are described. In addition,more » examples of experiments successfully performed at various neutron facilities with the furnace, as well as examples of possible applications are presented. Our work covers a broad field of research from fundamental to technological investigations of various types of materials and components.« less

Flexible sample environment for high resolution neutron imaging at high temperatures in controlled atmosphere

DOE PAGES

Makowska, Małgorzata G.; Theil Kuhn, Luise; Cleemann, Lars N.; ...

2015-12-17

In high material penetration by neutrons allows for experiments using sophisticated sample environments providing complex conditions. Thus, neutron imaging holds potential for performing in situ nondestructive measurements on large samples or even full technological systems, which are not possible with any other technique. Our paper presents a new sample environment for in situ high resolution neutron imaging experiments at temperatures from room temperature up to 1100 degrees C and/or using controllable flow of reactive atmospheres. The design also offers the possibility to directly combine imaging with diffraction measurements. Design, special features, and specification of the furnace are described. In addition,more » examples of experiments successfully performed at various neutron facilities with the furnace, as well as examples of possible applications are presented. Our work covers a broad field of research from fundamental to technological investigations of various types of materials and components.« less

The expert explorer: a tool for hospital data visualization and adverse drug event rules validation.

PubMed

Băceanu, Adrian; Atasiei, Ionuţ; Chazard, Emmanuel; Leroy, Nicolas

2009-01-01

An important part of adverse drug events (ADEs) detection is the validation of the clinical cases and the assessment of the decision rules to detect ADEs. For that purpose, a software called "Expert Explorer" has been designed by Ideea Advertising. Anonymized datasets have been extracted from hospitals into a common repository. The tool has 3 main features. (1) It can display hospital stays in a visual and comprehensive way (diagnoses, drugs, lab results, etc.) using tables and pretty charts. (2) It allows designing and executing dashboards in order to generate knowledge about ADEs. (3) It finally allows uploading decision rules obtained from data mining. Experts can then review the rules, the hospital stays that match the rules, and finally give their advice thanks to specialized forms. Then the rules can be validated, invalidated, or improved (knowledge elicitation phase).

15 CFR 744.12 - Restrictions on exports and reexports to persons designated in or pursuant to Executive Order...

Code of Federal Regulations, 2010 CFR

2010-01-01

... to persons designated in or pursuant to Executive Order 13224 (Specially Designated Global Terrorist... Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE EXPORT ADMINISTRATION... persons designated in or pursuant to Executive Order 13224 (Specially Designated Global Terrorist) (SDGT...

Voices from Michigan's Black River: obtaining information on "special places" for natural resource planning.

Treesearch

Herbert W. Schroeder

1996-01-01

An open-ended, qualitative survey was conducted to identify "special places" within the Black River area of Michigan`s Upper Peninsula, and to learn what kinds of experiences and environmental features led people to have strong feelings for these places.

A Best Practices Model for Preparation of Rural Special Education Teachers.

ERIC Educational Resources Information Center

Cegelka, Patricia A.; Alvarado, Jose Luis

2000-01-01

A district-university partnership program provides an alternative route to teacher certification for noncredentialed special education teachers working in a rural California desert region. The program features locally available courses, on-campus summer courses, an alternative internship credential, collaborative structure, a coach-of-coaches…

Some Common and Unique Features of Special Education in the Nordic Countries.

ERIC Educational Resources Information Center

Juul, Kristen D.

1989-01-01

Similarities in special education services in the five Scandinavian countries include their normalization philosophy and cooperative policy development. Among unique Scandinavian innovations are camp schools, folk high schools, toy libraries (lekoteks), therapeutic communities or collectives for young substance abuses, and measures to combat…

Information for Parents. Communique Special Edition, Fall 1996.

ERIC Educational Resources Information Center

National Association of School Psychologists, Washington, DC.

This compilation features articles on topics of special interest to parents that have been previously printed in "Communique," the official newspaper of the National Association of School Psychologists (NASP). Articles include: (1) "Children and Their Attitudes Toward Reading: A Handout for Parents" (J. Mullein); (2)…

Creating psychological connections between intervention recipients: development and focus group evaluation of a group singing session for people with aphasia

PubMed Central

Tarrant, Mark; Warmoth, Krystal; Code, Chris; Dean, Sarah; Goodwin, Victoria A; Stein, Ken; Sugavanam, Thavapriya

2016-01-01

Objectives The study sought to identify key design features that could be used to create a new framework for group-based health interventions. We designed and tested the first session of a group intervention for stroke survivors with aphasia which was aimed at nurturing new psychological connections between group members. Setting The intervention session, a participant focus group and interviews with intervention facilitators were held in a local community music centre in the South West of England. Participants A convenience sample of 10 community-dwelling people with poststroke aphasia participated in the session. Severity of aphasia was not considered for inclusion. Intervention Participants took part in a 90-min group singing session which involved singing songs from a specially prepared song book. Musical accompaniment was provided by the facilitators. Primary and secondary outcome measures Participants and group facilitators reported their experiences of participating in the session, with a focus on activities within the session related to the intervention aims. Researcher observations of the session were also made. Results Two themes emerged from the analysis, concerning experiences of the session (‘developing a sense of group belonging’) and perceptions of its design and delivery (‘creating the conditions for engagement’). Participants described an emerging sense of shared social identity as a member of the intervention group and identified fixed (eg, group size, session breaks) and flexible (eg, facilitator responsiveness) features of the session which contributed to this emergence. Facilitator interviews and researcher observations corroborated and expanded participant reports. Conclusions Engagement with health intervention content may be enhanced in group settings when intervention participants begin to establish positive and meaningful psychological connections with other group members. Understanding and actively nurturing these connections should be a core feature of a general framework for the design and delivery of group interventions. PMID:26908519

Creating psychological connections between intervention recipients: development and focus group evaluation of a group singing session for people with aphasia.

PubMed

Tarrant, Mark; Warmoth, Krystal; Code, Chris; Dean, Sarah; Goodwin, Victoria A; Stein, Ken; Sugavanam, Thavapriya

2016-02-23

The study sought to identify key design features that could be used to create a new framework for group-based health interventions. We designed and tested the first session of a group intervention for stroke survivors with aphasia which was aimed at nurturing new psychological connections between group members. The intervention session, a participant focus group and interviews with intervention facilitators were held in a local community music centre in the South West of England. A convenience sample of 10 community-dwelling people with poststroke aphasia participated in the session. Severity of aphasia was not considered for inclusion. Participants took part in a 90-min group singing session which involved singing songs from a specially prepared song book. Musical accompaniment was provided by the facilitators. Participants and group facilitators reported their experiences of participating in the session, with a focus on activities within the session related to the intervention aims. Researcher observations of the session were also made. Two themes emerged from the analysis, concerning experiences of the session ('developing a sense of group belonging') and perceptions of its design and delivery ('creating the conditions for engagement'). Participants described an emerging sense of shared social identity as a member of the intervention group and identified fixed (eg, group size, session breaks) and flexible (eg, facilitator responsiveness) features of the session which contributed to this emergence. Facilitator interviews and researcher observations corroborated and expanded participant reports. Engagement with health intervention content may be enhanced in group settings when intervention participants begin to establish positive and meaningful psychological connections with other group members. Understanding and actively nurturing these connections should be a core feature of a general framework for the design and delivery of group interventions. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

31 CFR 536.408 - Alleged change in ownership or control of an entity designated as a specially designated...

Code of Federal Regulations, 2010 CFR

2010-07-01

... sale of the entity to its new owners. (b) Any continuing substantial financial obligations on the part... to or other enrichment of a specially designated narcotics trafficker could lead to designation of...

Aquarius Radiometer Status

NASA Technical Reports Server (NTRS)

Le Vine, D. M.; Piepmeier, J. R.; Dinnat, E. P.; de Matthaeis, P.; Utku, C.; Abraham, S.; Lagerloef, G.S.E.; Meissner, T.; Wentz, F.

2014-01-01

Aquarius was launched on June 10, 2011 as part of the Aquarius/SAC-D observatory and the instrument has been operating continuously since being turned on in August of the same year. The initial map of sea surface salinity was released one month later (September) and the quality of the retrieval has continuously improved since then. The Aquarius radiometers include several special features such as measurement of the third Stokes parameter, fast sampling, and careful thermal control, and a combined passive/active instrument. Aquarius is working well and in addition to helping measure salinity, the radiometer special features are generating new results.

Scene Semantic Segmentation from Indoor Rgb-D Images Using Encode-Decoder Fully Convolutional Networks

NASA Astrophysics Data System (ADS)

Wang, Z.; Li, T.; Pan, L.; Kang, Z.

2017-09-01

With increasing attention for the indoor environment and the development of low-cost RGB-D sensors, indoor RGB-D images are easily acquired. However, scene semantic segmentation is still an open area, which restricts indoor applications. The depth information can help to distinguish the regions which are difficult to be segmented out from the RGB images with similar color or texture in the indoor scenes. How to utilize the depth information is the key problem of semantic segmentation for RGB-D images. In this paper, we propose an Encode-Decoder Fully Convolutional Networks for RGB-D image classification. We use Multiple Kernel Maximum Mean Discrepancy (MK-MMD) as a distance measure to find common and special features of RGB and D images in the network to enhance performance of classification automatically. To explore better methods of applying MMD, we designed two strategies; the first calculates MMD for each feature map, and the other calculates MMD for whole batch features. Based on the result of classification, we use the full connect CRFs for the semantic segmentation. The experimental results show that our method can achieve a good performance on indoor RGB-D image semantic segmentation.