Analysis of Frequency of Tests and Varying Feedback Delays in College Mathematics Achievement

ERIC Educational Resources Information Center

Townsend, Neal R.; Wheatley, Grayson H.

1975-01-01

Sixteen beginning analytic geometry and calculus classes (442 students) followed eight testing regimes for one academic quarter. Three aptitude subgroups were identified in each class. Classes to which daily quizzes were given achieved significantly higher on a specially constructed test than those which had only a single midterm examination.…

48 CFR 1336.270 - Special requirements for ship construction

Code of Federal Regulations, 2011 CFR

2011-10-01

... ship construction 1336.270 Section 1336.270 Federal Acquisition Regulations System DEPARTMENT OF... Contracting for Construction 1336.270 Special requirements for ship construction See 48 CFR 1371 for special requirements for acquisition involving ship construction and ship repair. ...

48 CFR 1336.270 - Special requirements for ship construction

Code of Federal Regulations, 2014 CFR

2014-10-01

... ship construction 1336.270 Section 1336.270 Federal Acquisition Regulations System DEPARTMENT OF... Contracting for Construction 1336.270 Special requirements for ship construction See 48 CFR 1371 for special requirements for acquisition involving ship construction and ship repair. ...

48 CFR 1336.270 - Special requirements for ship construction

Code of Federal Regulations, 2012 CFR

2012-10-01

... ship construction 1336.270 Section 1336.270 Federal Acquisition Regulations System DEPARTMENT OF... Contracting for Construction 1336.270 Special requirements for ship construction See 48 CFR 1371 for special requirements for acquisition involving ship construction and ship repair. ...

48 CFR 1336.270 - Special requirements for ship construction

Code of Federal Regulations, 2013 CFR

2013-10-01

... ship construction 1336.270 Section 1336.270 Federal Acquisition Regulations System DEPARTMENT OF... Contracting for Construction 1336.270 Special requirements for ship construction See 48 CFR 1371 for special requirements for acquisition involving ship construction and ship repair. ...

Competence Assessment of Students with Special Educational Needs--Identification of Appropriate Testing Accommodations

ERIC Educational Resources Information Center

Südkamp, Anna; Pohl, Steffi; Weinert, Sabine

2015-01-01

Including students with special educational needs in learning (SEN-L) is a challenge for large-scale assessments. In order to draw inferences with respect to students with SEN-L and to compare their scores to students in general education, one needs to assure that the measurement model is reliable and that the same construct is measured for…

46 CFR 98.25-97 - Nondestructive testing.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Nondestructive testing. 98.25-97 Section 98.25-97 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL CONSTRUCTION, ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Anhydrous Ammonia in Bulk...

46 CFR 98.25-97 - Nondestructive testing.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Nondestructive testing. 98.25-97 Section 98.25-97 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL CONSTRUCTION, ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Anhydrous Ammonia in Bulk...

46 CFR 98.25-97 - Nondestructive testing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Nondestructive testing. 98.25-97 Section 98.25-97 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL CONSTRUCTION, ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Anhydrous Ammonia in Bulk...

46 CFR 98.25-97 - Nondestructive testing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Nondestructive testing. 98.25-97 Section 98.25-97 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL CONSTRUCTION, ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Anhydrous Ammonia in Bulk...

46 CFR 98.25-97 - Nondestructive testing.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Nondestructive testing. 98.25-97 Section 98.25-97 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL CONSTRUCTION, ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Anhydrous Ammonia in Bulk...

14 CFR 25.651 - Proof of strength.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Control Surfaces § 25.651 Proof of strength. (a) Limit load tests of control surfaces are required. These tests must include the horn or fitting to which the control system is attached. (b) Compliance with the special factors requirements of...

14 CFR 25.651 - Proof of strength.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Control Surfaces § 25.651 Proof of strength. (a) Limit load tests of control surfaces are required. These tests must include the horn or fitting to which the control system is attached. (b) Compliance with the special factors requirements of...

14 CFR 25.651 - Proof of strength.

Code of Federal Regulations, 2014 CFR

2014-01-01

... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Control Surfaces § 25.651 Proof of strength. (a) Limit load tests of control surfaces are required. These tests must include the horn or fitting to which the control system is attached. (b) Compliance with the special factors requirements of...

14 CFR 25.651 - Proof of strength.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction Control Surfaces § 25.651 Proof of strength. (a) Limit load tests of control surfaces are required. These tests must include the horn or fitting to which the control system is attached. (b) Compliance with the special factors requirements of...

41 CFR 109-27.5011-1 - General.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., or for use on construction projects. Additional markings not covered by Federal standards should be used to show special properties, corrosion data, or test data as required. The preferred process is for...

46 CFR 98.25-95 - Tests and inspections.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Tests and inspections. 98.25-95 Section 98.25-95 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL CONSTRUCTION, ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Anhydrous Ammonia in Bulk...

46 CFR 98.25-95 - Tests and inspections.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Tests and inspections. 98.25-95 Section 98.25-95 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL CONSTRUCTION, ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Anhydrous Ammonia in Bulk...

46 CFR 98.25-95 - Tests and inspections.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Tests and inspections. 98.25-95 Section 98.25-95 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL CONSTRUCTION, ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Anhydrous Ammonia in Bulk...

46 CFR 98.25-95 - Tests and inspections.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Tests and inspections. 98.25-95 Section 98.25-95 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL CONSTRUCTION, ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Anhydrous Ammonia in Bulk...

46 CFR 98.25-95 - Tests and inspections.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Tests and inspections. 98.25-95 Section 98.25-95 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL CONSTRUCTION, ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Anhydrous Ammonia in Bulk...

A specialized isotope mass spectrometer for noninvasive diagnostics of Helicobacter pylori infection in human beings

NASA Astrophysics Data System (ADS)

Blashenkov, N. M.; Sheshenya, E. S.; Solov'ev, S. M.; Sachenko, V. D.; Gall, L. N.; Zarutskii, I. V.; Gall, N. R.

2013-05-01

A specialized isotope mass spectrometer for noninvasive diagnostics of Helicobacter pylori infection in human beings based on the carbon-13 isotope breath test has been designed and constructed. Important stages of the work included (i) calculating a low-aberration mass analyzer, (ii) manufacturing and testing special gas inlet system, and (iii) creating a small-size collector of ions. The proposed instrument ensures 13C/12C isotopic ratio measurement to within 1.7‰ (pro mille) accuracy, which corresponds to requirements for a diagnostic tool. Preliminary medical testing showed that the mass spectrometer is applicable to practical diagnostics. The instrument is also capable of measuring isotopic ratios of other light elements, including N, O, B (for BF2+ ions), Ar, Cl, and S.

Cantilever Wings for Modern Aircraft: Some Aspects of Cantilever Wing Construction with Special Reference to Weight and Torsional Stiffness

NASA Technical Reports Server (NTRS)

Stieger, H J

1929-01-01

In the foregoing remarks I have made an attempt to touch on some of the structural problems met with in cantilever wings, and dealt rather fully with a certain type of single-spar construction. The experimental test wing was a first attempt to demonstrate the principles of this departure from orthodox methods. The result was a wing both torsionally stiff and of light weight - lighter than a corresponding biplane construction.

Development and Evaluation of Job Reading Task Tests.

ERIC Educational Resources Information Center

Sticht, Thomas G.; Caylor, John S.

The use of readability formulae to estimate the difficulty levels of vocational reading materials, the determination of relationships of reading skills to job proficiency, and the relationship of general reading ability to performance on specially constructed job reading task tests (JRTT) are discussed to define the literacy skill demands (i.e.,…

A Computer-Adaptive Vocabulary Test

ERIC Educational Resources Information Center

Molina, Maria Teresa Lopez-Mezquita

2009-01-01

Lexical competence is considered to be an essential step in the development and consolidation of a student's linguistic ability, and thus the reliable assessment of such competence turns out to be a fundamental aspect in this process. The design and construction of vocabulary tests has become an area of special interest, as it may provide teachers…

48 CFR 970.3605-2 - Special construction clause for operating contracts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... DEPARTMENT OF ENERGY AGENCY SUPPLEMENTARY REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Construction and Architect-Engineer Contracts 970.3605-2 Special construction clause for operating contracts. The clause at... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Special construction...

48 CFR 970.3605-2 - Special construction clause for operating contracts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... DEPARTMENT OF ENERGY AGENCY SUPPLEMENTARY REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Construction and Architect-Engineer Contracts 970.3605-2 Special construction clause for operating contracts. The clause at... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Special construction...

48 CFR 239.7408 - Special construction.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Special construction. 239.7408 Section 239.7408 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... Telecommunications Services 239.7408 Special construction. ...

48 CFR 239.7408 - Special construction.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Special construction. 239.7408 Section 239.7408 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM... Telecommunications Services 239.7408 Special construction. ...

Aeronautical Engineering: A special bibliography with indexes, supplement 13

NASA Technical Reports Server (NTRS)

1972-01-01

This special bibliography lists 283 reports, articles, and other documents introduced into the NASA scientific and technical information system in December, 1971. Emphasis is placed on engineering and theoretical aspects for design, construction, evaluation, testing, operation and performance of aircraft (including aircraft engines), and associated components, equipment and systems. Also included are entries on research and development in aeronautics and aerodynamics and research and ground support for aeronautical vehicles.

Aeronautical Engineering, a special bibliography with indexes, supplement 15

NASA Technical Reports Server (NTRS)

1972-01-01

This special bibliography lists 363 reports, articles, and other documents introduced into the NASA scientific and technical information system in January 1972. Emphasis is placed on engineering and theoretical aspects for design, construction, evaluation, testing, operation and performance of aircraft (including aircraft engines) and associated components, equipment and systems. Also included are entries on research and development in aeronautics and aerodynamics and research and ground support for aeronautical vehicles.

Special Operations Forces: Opportunities Exist to Improve Transparency of Funding and Assess Potential to Lessen Some Deployments

DTIC Science & Technology

2015-07-01

pace of special operations deployments, but opportunities may exist to better balance the workload across the joint force because activities...executes funding in operation and maintenance; procurement; research , development, test, and evaluation; and military construction accounts.13 SOCOM...regional awareness. Moreover, officials noted that increases in civilian positions were driven partly by DOD’s attempts to rebalance workload and become a

49 CFR 231.18 - Cars of special construction.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Cars of special construction. 231.18 Section 231... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.18 Cars of special construction. Cars of construction not covered specifically in the foregoing sections in this part, relative to...

49 CFR 231.18 - Cars of special construction.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Cars of special construction. 231.18 Section 231... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.18 Cars of special construction. Cars of construction not covered specifically in the foregoing sections in this part, relative to...

49 CFR 231.18 - Cars of special construction.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Cars of special construction. 231.18 Section 231... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.18 Cars of special construction. Cars of construction not covered specifically in the foregoing sections in this part, relative to...

49 CFR 231.18 - Cars of special construction.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Cars of special construction. 231.18 Section 231... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.18 Cars of special construction. Cars of construction not covered specifically in the foregoing sections in this part, relative to...

49 CFR 231.18 - Cars of special construction.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Cars of special construction. 231.18 Section 231... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.18 Cars of special construction. Cars of construction not covered specifically in the foregoing sections in this part, relative to...

AVHRR/1-FM Advanced Very High Resolution Radiometer

NASA Technical Reports Server (NTRS)

1979-01-01

The advanced very high resolution radiometer is discussed. The program covers design, construction, and test of a breadboard model, engineering model, protoflight model, mechanical/structural model, and a life test model. Special bench test and calibration equipment was developed for use on the program. The flight model program objectives were to fabricate, assemble and test four of the advanced very high resolution radiometers along with a bench cooler and collimator.

Evaluation of earthquake potential in China

NASA Astrophysics Data System (ADS)

Rong, Yufang

I present three earthquake potential estimates for magnitude 5.4 and larger earthquakes for China. The potential is expressed as the rate density (that is, the probability per unit area, magnitude and time). The three methods employ smoothed seismicity-, geologic slip rate-, and geodetic strain rate data. I test all three estimates, and another published estimate, against earthquake data. I constructed a special earthquake catalog which combines previous catalogs covering different times. I estimated moment magnitudes for some events using regression relationships that are derived in this study. I used the special catalog to construct the smoothed seismicity model and to test all models retrospectively. In all the models, I adopted a kind of Gutenberg-Richter magnitude distribution with modifications at higher magnitude. The assumed magnitude distribution depends on three parameters: a multiplicative " a-value," the slope or "b-value," and a "corner magnitude" marking a rapid decrease of earthquake rate with magnitude. I assumed the "b-value" to be constant for the whole study area and estimated the other parameters from regional or local geophysical data. The smoothed seismicity method assumes that the rate density is proportional to the magnitude of past earthquakes and declines as a negative power of the epicentral distance out to a few hundred kilometers. I derived the upper magnitude limit from the special catalog, and estimated local "a-values" from smoothed seismicity. I have begun a "prospective" test, and earthquakes since the beginning of 2000 are quite compatible with the model. For the geologic estimations, I adopted the seismic source zones that are used in the published Global Seismic Hazard Assessment Project (GSHAP) model. The zones are divided according to geological, geodetic and seismicity data. Corner magnitudes are estimated from fault length, while fault slip rates and an assumed locking depth determine earthquake rates. The geological model fits the earthquake data better than the GSHAP model. By smoothing geodetic strain rate, another potential model was constructed and tested. I derived the upper magnitude limit from the Special catalog, and assume local "a-values" proportional to geodetic strain rates. "Prospective" tests show that the geodetic strain rate model is quite compatible with earthquakes. By assuming the smoothed seismicity model as a null hypothesis, I tested every other model against it. Test results indicate that the smoothed seismicity model performs best.

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

DOE Office of Scientific and Technical Information (OSTI.GOV)

M.A. Ebadian

1999-07-31

FIU-HCET personnel visited the Special Technologies Laboratory (STL) for discussions with the Principal Investigator (PI) of Laser Induced Fluorescence Imaging (LIFI) and for training in LIFI. Mr. Peter Gibbons, Tanks Retrieval Technology Integration Manager, visited FIU-HCET on July 20, 1999. Mr. Gibbons inspected the pipeline unplugging experimental facility at the HCET testing field. The detailed test bed construction, testing plan, and plugging material specifications were discussed.

10 CFR 71.64 - Special requirements for plutonium air shipments.

Code of Federal Regulations, 2012 CFR

2012-01-01

... requirements of §§ 71.41 through 71.63, as applicable, must be designed, constructed, and prepared for shipment so that under the tests specified in— (1) Section 71.74 (“Accident conditions for air transport of plutonium”)— (i) The containment vessel would not be ruptured in its post-tested condition, and the package...

10 CFR 71.64 - Special requirements for plutonium air shipments.

Code of Federal Regulations, 2013 CFR

2013-01-01

... requirements of §§ 71.41 through 71.63, as applicable, must be designed, constructed, and prepared for shipment so that under the tests specified in— (1) Section 71.74 (“Accident conditions for air transport of plutonium”)— (i) The containment vessel would not be ruptured in its post-tested condition, and the package...

10 CFR 71.64 - Special requirements for plutonium air shipments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... requirements of §§ 71.41 through 71.63, as applicable, must be designed, constructed, and prepared for shipment so that under the tests specified in— (1) Section 71.74 (“Accident conditions for air transport of plutonium”)— (i) The containment vessel would not be ruptured in its post-tested condition, and the package...

10 CFR 71.64 - Special requirements for plutonium air shipments.

Code of Federal Regulations, 2014 CFR

2014-01-01

... requirements of §§ 71.41 through 71.63, as applicable, must be designed, constructed, and prepared for shipment so that under the tests specified in— (1) Section 71.74 (“Accident conditions for air transport of plutonium”)— (i) The containment vessel would not be ruptured in its post-tested condition, and the package...

29 CFR 4211.3 - Special rules for construction industry and IRC section 404(c) plans.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 9 2014-07-01 2014-07-01 false Special rules for construction industry and IRC section 404... WITHDRAWING EMPLOYERS General § 4211.3 Special rules for construction industry and IRC section 404(c) plans... covers employees in the building and construction industry shall use the presumptive method for...

29 CFR 4211.3 - Special rules for construction industry and IRC section 404(c) plans.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false Special rules for construction industry and IRC section 404... WITHDRAWING EMPLOYERS General § 4211.3 Special rules for construction industry and IRC section 404(c) plans... covers employees in the building and construction industry shall use the presumptive method for...

29 CFR 4211.3 - Special rules for construction industry and IRC section 404(c) plans.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 9 2012-07-01 2012-07-01 false Special rules for construction industry and IRC section 404... WITHDRAWING EMPLOYERS General § 4211.3 Special rules for construction industry and IRC section 404(c) plans... covers employees in the building and construction industry shall use the presumptive method for...

29 CFR 4211.3 - Special rules for construction industry and IRC section 404(c) plans.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Special rules for construction industry and IRC section 404... WITHDRAWING EMPLOYERS General § 4211.3 Special rules for construction industry and IRC section 404(c) plans... covers employees in the building and construction industry shall use the presumptive method for...

29 CFR 4211.3 - Special rules for construction industry and IRC section 404(c) plans.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 9 2011-07-01 2011-07-01 false Special rules for construction industry and IRC section 404... WITHDRAWING EMPLOYERS General § 4211.3 Special rules for construction industry and IRC section 404(c) plans... covers employees in the building and construction industry shall use the presumptive method for...

The GAMCIT gamma ray burst detector

NASA Technical Reports Server (NTRS)

Mccall, Benjamin J.; Grunsfeld, John M.; Sobajic, Srdjan D.; Chang, Chinley Leonard; Krum, David M.; Ratner, Albert; Trittschuh, Jennifer E.

1993-01-01

The GAMCIT payload is a Get-Away-Special payload designed to search for high-energy gamma-ray bursts and any associated optical transients. This paper presents details on the design of the GAMCIT payload, in the areas of battery selection, power processing, electronics design, gamma-ray detection systems, and the optical imaging of the transients. The paper discusses the progress of the construction, testing, and specific design details of the payload. In addition, this paper discusses the unique challenges involved in bringing this payload to completion, as the project has been designed, constructed, and managed entirely by undergraduate students. Our experience will certainly be valuable to other student groups interested in taking on a challenging project such as a Get-Away-Special payload.

48 CFR 236.275 - Construction of industrial resources.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Construction of industrial... SYSTEM, DEPARTMENT OF DEFENSE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 236.275 Construction of industrial resources. See...

48 CFR 236.275 - Construction of industrial resources.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Construction of industrial... SYSTEM, DEPARTMENT OF DEFENSE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 236.275 Construction of industrial resources. See...

Internal Stresses in Laminated Construction

NASA Technical Reports Server (NTRS)

Heim, A L; Knauss, A C; Seutter, Louis

1923-01-01

This report reviews the procedure employed in an investigation of the sources and influence of internal stresses in laminated construction, and discusses the influence of shrinkage and swelling stresses caused by atmospheric conditions upon the tensile strength across grain in laminated construction with special reference to airplane propellers. The investigation covered three sources of internal stress, namely, the combination of plain-sawed and quarter-sawed material in the same construction, the gluing together of laminations of different moisture contents, and the gluing together of laminations of different densities. Glued specimens and free specimens, made up under various manufacturing conditions, were subjected to various climatic changes inducing internal stresses and then were tested.

48 CFR 1436.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2012 CFR

2012-10-01

... with architect-engineer firms. 1436.209 Section 1436.209 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 1436.209 Construction contracts with architect-engineer...

48 CFR 436.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2013 CFR

2013-10-01

... with architect-engineer firms. 436.209 Section 436.209 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 436.209 Construction contracts with architect-engineer...

48 CFR 1436.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2010 CFR

2010-10-01

... with architect-engineer firms. 1436.209 Section 1436.209 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 1436.209 Construction contracts with architect-engineer...

48 CFR 1436.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2011 CFR

2011-10-01

... with architect-engineer firms. 1436.209 Section 1436.209 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 1436.209 Construction contracts with architect-engineer...

48 CFR 436.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2014 CFR

2014-10-01

... with architect-engineer firms. 436.209 Section 436.209 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 436.209 Construction contracts with architect-engineer...

48 CFR 1536.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2013 CFR

2013-10-01

... with architect-engineer firms. 1536.209 Section 1536.209 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 1536.209 Construction contracts with architect-engineer...

48 CFR 436.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2010 CFR

2010-10-01

... with architect-engineer firms. 436.209 Section 436.209 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 436.209 Construction contracts with architect-engineer...

48 CFR 436.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2012 CFR

2012-10-01

... with architect-engineer firms. 436.209 Section 436.209 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 436.209 Construction contracts with architect-engineer...

48 CFR 436.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2011 CFR

2011-10-01

... with architect-engineer firms. 436.209 Section 436.209 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 436.209 Construction contracts with architect-engineer...

48 CFR 1436.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2014 CFR

2014-10-01

... with architect-engineer firms. 1436.209 Section 1436.209 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 1436.209 Construction contracts with architect-engineer...

48 CFR 1536.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2011 CFR

2011-10-01

... with architect-engineer firms. 1536.209 Section 1536.209 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 1536.209 Construction contracts with architect-engineer...

48 CFR 1536.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2012 CFR

2012-10-01

... with architect-engineer firms. 1536.209 Section 1536.209 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 1536.209 Construction contracts with architect-engineer...

48 CFR 1536.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2010 CFR

2010-10-01

... architect-engineer firms. 1536.209 Section 1536.209 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 1536.209 Construction contracts with architect-engineer firms. (a...

48 CFR 1436.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2013 CFR

2013-10-01

... with architect-engineer firms. 1436.209 Section 1436.209 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 1436.209 Construction contracts with architect-engineer...

48 CFR 1536.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2014 CFR

2014-10-01

... with architect-engineer firms. 1536.209 Section 1536.209 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 1536.209 Construction contracts with architect-engineer...

32 CFR 651.33 - Actions normally requiring an EA.

Code of Federal Regulations, 2011 CFR

2011-07-01

... for the use of a CX: (a) Special field training exercises or test activities in excess of five acres... off-post construction. (c) Changes to established installation land use that generate impacts on the..., fielding, and training involving natural resources, and disposal/demilitarization. System design...

Lightweight composites for modular panelized construction

NASA Astrophysics Data System (ADS)

Vaidya, Amol S.

Rapid advances in construction materials technology have enabled civil engineers to achieve impressive gains in the safety, economy, and functionality of structures built to serve the common needs of society. Modular building systems is a fast-growing modern, form of construction gaining recognition for its increased efficiency and ability to apply modern technology to the needs of the market place. In the modular construction technique, a single structural panel can perform a number of functions such as providing thermal insulation, vibration damping, and structural strength. These multifunctional panels can be prefabricated in a manufacturing facility and then transferred to the construction site. A system that uses prefabricated panels for construction is called a "panelized construction system". This study focuses on the development of pre-cast, lightweight, multifunctional sandwich composite panels to be used for panelized construction. Two thermoplastic composite panels are proposed in this study, namely Composite Structural Insulated Panels (CSIPs) for exterior walls, floors and roofs, and Open Core Sandwich composite for multifunctional interior walls of a structure. Special manufacturing techniques are developed for manufacturing these panels. The structural behavior of these panels is analyzed based on various building design codes. Detailed descriptions of the design, cost analysis, manufacturing, finite element modeling and structural testing of these proposed panels are included in this study in the of form five peer-reviewed journal articles. The structural testing of the proposed panels involved in this study included flexural testing, axial compression testing, and low and high velocity impact testing. Based on the current study, the proposed CSIP wall and floor panels were found satisfactory, based on building design codes ASCE-7-05 and ACI-318-05. Joining techniques are proposed in this study for connecting the precast panels on the construction site. Keywords: Modular panelized construction, sandwich composites, composite structural insulated panels (CSIPs).

48 CFR 36.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2013 CFR

2013-10-01

... with architect-engineer firms. 36.209 Section 36.209 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 36.209 Construction contracts with architect-engineer firms. No...

48 CFR 636.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2013 CFR

2013-10-01

... with architect-engineer firms. 636.209 Section 636.209 Federal Acquisition Regulations System DEPARTMENT OF STATE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 636.209 Construction contracts with architect-engineer firms. The...

48 CFR 636.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2014 CFR

2014-10-01

... with architect-engineer firms. 636.209 Section 636.209 Federal Acquisition Regulations System DEPARTMENT OF STATE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 636.209 Construction contracts with architect-engineer firms. The...

48 CFR 636.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2011 CFR

2011-10-01

... with architect-engineer firms. 636.209 Section 636.209 Federal Acquisition Regulations System DEPARTMENT OF STATE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 636.209 Construction contracts with architect-engineer firms. The...

48 CFR 636.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2012 CFR

2012-10-01

... with architect-engineer firms. 636.209 Section 636.209 Federal Acquisition Regulations System DEPARTMENT OF STATE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 636.209 Construction contracts with architect-engineer firms. The...

48 CFR 36.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2011 CFR

2011-10-01

... with architect-engineer firms. 36.209 Section 36.209 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 36.209 Construction contracts with architect-engineer firms. No...

48 CFR 636.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2010 CFR

2010-10-01

... with architect-engineer firms. 636.209 Section 636.209 Federal Acquisition Regulations System DEPARTMENT OF STATE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 636.209 Construction contracts with architect-engineer firms. The...

48 CFR 36.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2010 CFR

2010-10-01

... with architect-engineer firms. 36.209 Section 36.209 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 36.209 Construction contracts with architect-engineer firms. No...

48 CFR 36.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2012 CFR

2012-10-01

... with architect-engineer firms. 36.209 Section 36.209 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 36.209 Construction contracts with architect-engineer firms. No...

48 CFR 36.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2014 CFR

2014-10-01

... with architect-engineer firms. 36.209 Section 36.209 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 36.209 Construction contracts with architect-engineer firms. No...

26 CFR 48.4216(b)-3 - Constructive sale price; special rule for arm's-length sales.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 16 2011-04-01 2011-04-01 false Constructive sale price; special rule for arm's... Provisions Applicable to Manufacturers Taxes § 48.4216(b)-3 Constructive sale price; special rule for arm's... such articles to one or more wholesale distributors in arm's-length transactions, and the manufacturer...

26 CFR 48.4216(b)-3 - Constructive sale price; special rule for arm's-length sales.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 16 2013-04-01 2013-04-01 false Constructive sale price; special rule for arm's... Provisions Applicable to Manufacturers Taxes § 48.4216(b)-3 Constructive sale price; special rule for arm's... such articles to one or more wholesale distributors in arm's-length transactions, and the manufacturer...

26 CFR 48.4216(b)-3 - Constructive sale price; special rule for arm's-length sales.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 16 2012-04-01 2012-04-01 false Constructive sale price; special rule for arm's... Provisions Applicable to Manufacturers Taxes § 48.4216(b)-3 Constructive sale price; special rule for arm's... such articles to one or more wholesale distributors in arm's-length transactions, and the manufacturer...

The orbiter mate/demate device

NASA Technical Reports Server (NTRS)

Miller, A. J.; Binkley, W. H.

1985-01-01

The numerous components and systems of the space shuttle orbiter mate/demate device (MDD) are discussed. Special emphasis is given, mechanisms and mechanical systems to discuss in general their requirements, functions, and design; and, where applicable, to relate any unusual problems encountered during the initial concept studies, final design, and construction are discussed. The MDD and its electrical, machinery, and mechanical systems, including the main hoisting system, power operated access service platform, wind restrain and adjustment mechanism, etc., were successfully designed and constructed. The MDD was used routinely during the initial orbiter-747 approach and landing test and the more recent orbiter flight tests recovery and mate operations.

48 CFR 915.404-4-72 - Special considerations for cost-plus-award-fee contracts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... management and operating contracts or other contracts as determined by the Senior Procurement Executive, including those using the Construction, Construction Management, or Special Equipment Purchases/Subcontract... for construction and construction management contracts). However, the base amount should not normally...

48 CFR 915.404-4-72 - Special considerations for cost-plus-award-fee contracts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... management and operating contracts or other contracts as determined by the Senior Procurement Executive, including those using the Construction, Construction Management, or Special Equipment Purchases/Subcontract... for construction and construction management contracts). However, the base amount should not normally...

48 CFR 915.404-4-72 - Special considerations for cost-plus-award-fee contracts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... management and operating contracts or other contracts as determined by the Senior Procurement Executive, including those using the Construction, Construction Management, or Special Equipment Purchases/Subcontract... for construction and construction management contracts). However, the base amount should not normally...

48 CFR 915.404-4-72 - Special considerations for cost-plus-award-fee contracts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... management and operating contracts or other contracts as determined by the Senior Procurement Executive, including those using the Construction, Construction Management, or Special Equipment Purchases/Subcontract... for construction and construction management contracts). However, the base amount should not normally...

Evaluation of Biobased Hydraulic Fluids in Military Construction Equipment

DTIC Science & Technology

2007-10-31

systems. They are basically divided into two groups. One is natural rubber and the other one is a synthetic elastomer. Their formulations and physical...compatibility test. This reference elastomer was specially formulated with Nitrile or Buna N ( NBR -L) material and is widely used in the many

32 CFR 651.33 - Actions normally requiring an EA.

Code of Federal Regulations, 2010 CFR

2010-07-01

... for the use of a CX: (a) Special field training exercises or test activities in excess of five acres... off-post construction. (c) Changes to established installation land use that generate impacts on the..., and the action is not adequately addressed by existing NEPA documentation. Examples of actions...

Occupational Outcomes: Who, What and Why?

ERIC Educational Resources Information Center

Claudy, John G.

This report presents data obtained from Project Talent (a longitudinal study designed to achieve a better understanding of the career plans and career development of young adults). In 1960 400,000 students in grades nine through twelve were administered a battery of specially constructed tests and inventories which collected data about their…

Allocating Resources for Learning Support: A Case Study.

ERIC Educational Resources Information Center

Sharp, Stephen

2000-01-01

Examines how learning-support resources are allocated to Scottish secondary schools, drawing on data from an Edinburgh education authority. Although a rationale for allocating resources based on socioeconomic indices can be constructed, basing decisions on a combination of standardized attainment tests and special-needs audits is preferable.…

A multi-agent safety response model in the construction industry.

PubMed

Meliá, José L

2015-01-01

The construction industry is one of the sectors with the highest accident rates and the most serious accidents. A multi-agent safety response approach allows a useful diagnostic tool in order to understand factors affecting risk and accidents. The special features of the construction sector can influence the relationships among safety responses along the model of safety influences. The purpose of this paper is to test a model explaining risk and work-related accidents in the construction industry as a result of the safety responses of the organization, the supervisors, the co-workers and the worker. 374 construction employees belonging to 64 small Spanish construction companies working for two main companies participated in the study. Safety responses were measured using a 45-item Likert-type questionnaire. The structure of the measure was analyzed using factor analysis and the model of effects was tested using a structural equation model. Factor analysis clearly identifies the multi-agent safety dimensions hypothesized. The proposed safety response model of work-related accidents, involving construction specific results, showed a good fit. The multi-agent safety response approach to safety climate is a useful framework for the assessment of organizational and behavioral risks in construction.

Power Control and Monitoring Requirements for Thermal Vacuum/Thermal Balance Testing of the MAP Observatory

NASA Technical Reports Server (NTRS)

Johnson, Chris; Hinkle, R. Kenneth (Technical Monitor)

2002-01-01

The specific heater control requirements for the thermal vacuum and thermal balance testing of the Microwave Anisotropy Probe (MAP) Observatory at the Goddard Space Flight Center (GSFC) in Greenbelt, Maryland are described. The testing was conducted in the 10m wide x 18.3m high Space Environment Simulator (SES) Thermal Vacuum Facility. The MAP thermal testing required accurate quantification of spacecraft and fixture power levels while minimizing heater electrical emissions. The special requirements of the MAP test necessitated construction of five (5) new heater racks.

Research and Development: A Complex Relationship Part I [and] Part II.

ERIC Educational Resources Information Center

Pollard, John Douglas Edward

Part 1 of this document describes the background, format, and early groundwork that went into the development of a test sponsored entirely by private enterprise. The discipline imposed by a financial bottom line imposes special pressures but also offers new opportunities. This private enterprise model is a multi-constructional process where…

Development of Specialization Scales for the MSPI: A Comparison of Empirical and Inductive Strategies

ERIC Educational Resources Information Center

Porfeli, Erik J.; Richard, George V.; Savickas, Mark L.

2010-01-01

An empirical measurement model for interest inventory construction uses internal criteria whereas an inductive measurement model uses external criteria. The empirical and inductive measurement models are compared and contrasted and then two models are assessed through tests of the effectiveness and economy of scales for the Medical Specialty…

Development of an economical thin, quiet, long-lasting, high friction surface layer for economical use in Illinois, volume 2 : field construction, field testing, and engineering benefit analysis.

DOT National Transportation Integrated Search

2013-03-01

This project provides techniques to improve hot-mix asphalt (HMA) overlays specifically through the use of : special additives and innovative surfacing technologies with aggregates that are locally available in Illinois. The : ultimate goal is to imp...

Introduction to the Special Section: Toward a Dimensionally Based Taxonomy of Psychopathology

PubMed Central

Krueger, Robert F.; Watson, David; Barlow, David H.

2008-01-01

Much current psychopathology research is framed by categorical constructs. Limitations of categorical constructs have been articulated, and dimensional constructs are often proposed as viable alternatives to categories of psychopathology. The purpose of this Special Section is to articulate and discuss diverse issues that arise in contemplating dimensional constructs as targets for psychopathology research. PMID:16351372

Space station structures and dynamics test program

NASA Technical Reports Server (NTRS)

Moore, Carleton J.; Townsend, John S.; Ivey, Edward W.

1987-01-01

The design, construction, and operation of a low-Earth orbit space station poses unique challenges for development and implementation of new technology. The technology arises from the special requirement that the station be built and constructed to function in a weightless environment, where static loads are minimal and secondary to system dynamics and control problems. One specific challenge confronting NASA is the development of a dynamics test program for: (1) defining space station design requirements, and (2) identifying the characterizing phenomena affecting the station's design and development. A general definition of the space station dynamic test program, as proposed by MSFC, forms the subject of this report. The test proposal is a comprehensive structural dynamics program to be launched in support of the space station. The test program will help to define the key issues and/or problems inherent to large space structure analysis, design, and testing. Development of a parametric data base and verification of the math models and analytical analysis tools necessary for engineering support of the station's design, construction, and operation provide the impetus for the dynamics test program. The philosophy is to integrate dynamics into the design phase through extensive ground testing and analytical ground simulations of generic systems, prototype elements, and subassemblies. On-orbit testing of the station will also be used to define its capability.

Pediatric Perimeter-A Novel Device to Measure Visual Fields in Infants and Patients with Special Needs.

PubMed

Satgunam, PremNandhini; Datta, Sourav; Chillakala, Koteswararao; Bobbili, Karthik R; Joshi, Dhruv

2017-07-01

There are no commercially available devices to measure visual fields in infants. We developed a device, "Pediatric Perimeter," that quantifies visual field extent (VFE) for infants. We describe the construction, validation, and use of this device. A hemispherical dome with light emitting diodes (LEDs) was constructed. The LEDs were controlled using a computer program to measure reaction time (RT) to gross visual fields (GVF) and the VFE. Participants were tested in supine position in a dark room. Eye or head movement towards the stimuli was monitored with an infrared (IR) camera. Validation was done on 10 adults (mean age: 24.4 ± 5 years) with tunnel vision simulator. Perimetry was performed on 19 infants (age: 2.3-12 months), five infants with normal milestones. GVF and VFE were estimated in 17 and 7 infants, respectively. Median RT of infants with developmental delay was 663 ms and 380 ms for healthy infants. Also, 14 children (age: 14 months-6 years) with developmental delay and five patients with cognitive impairment were tested. Visual field isopter and RT can be examined with the Pediatric Perimeter device on infants and patients with special needs. Further testing on infants will need to assess the repeatability. A large-scale study will be needed to compare typically developing infants and infants with delayed milestones with this device. Quantifiable parameters obtained with this device can be used as outcome measures in clinical examination of infants and patients with special needs. This device can be used in pediatric, neurology, and ophthalmology clinics.

Standard specification for light ladders

NASA Astrophysics Data System (ADS)

1980-11-01

Requirements are given for the construction, inspection, and testing of single ladders, extension ladders, step-ladders, extending step-ladders, trestle ladders, extending trestle ladders, and special purpose ladders. The composition of the aluminum alloys, and of the steels and glass fiber reinforced polyester components coming into contact with the aluminum are included. Coatings used to provide corrosion resistance are also specified.

Construction Mechanic, Engine Tune-Up I, 8-7. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, teaches students to perform a complete engine tune-up using appropriate hand tools, special tools, and testing equipment. Students completing the course will be able to diagnose gasoline-engine performance and perform corrective measures to…

A path to in-space welding and to other in-space metal processing technologies using Space Shuttle small payloads

NASA Technical Reports Server (NTRS)

Tamir, David

1992-01-01

As we venture into space, it becomes necessary to assemble, expand, and repair space-based structures for our housing, research, and manufacturing. The zero gravity-vacuum of space challenges us to employ construction options which are commonplace on Earth. Rockwell International (RI) has begun to undertake the challenge of space-based construction via numerous options, of which one is welding. As of today, RI divisions have developed appropriate resources and technologies to bring space-based welding within our grasp. Further work, specifically in the area of developing space experiments to test RI technology, is required. RI Space Welding Project's achievements to date, from research and development (R&E) efforts in the areas of microgravity, vacuum, intra- / extra- vehicular activity and spinoff technologies, are reviewed. Special emphasis is given to results for G-169's (Get Away Special) microgravity flights aboard a NASA KC-135. Based on these achievements, a path to actual development of a space welding system is proposed with options to explore spinoff in-space metal processing technologies. This path is constructed by following a series of milestone experiments, of which several are to utilize NASA's Shuttle Small Payload Programs. Conceptual designs of the proposed shuttle payload experiments are discussed with application of lessons learned from G-169's design, development, integration, testing, safety approval process, and KC-135 flights.

Theory-driven research in pediatric psychology: a little bit on why and how.

PubMed

Wallander, J L

1992-10-01

Introduces a Special Issue, covering two published issues (5 and 6) of this journal, on theory-driven research in pediatric psychology. A rationale for conducting research from a conceptual basis is presented. It is emphasized that science is primarily an intellectual activity, demonstrated in the form of theory building, testing, and reformulation. Furthermore, it is argued theory serves as a planning and communication aide for scientific pursuit. The process and components of theory-driven research are then highlighted. Theoretical constructs, theoretical and empirical definitions of constructs, and the use of variables are discussed. A definition of scientific theory is offered. Theory testing is distinguished from post hoc theorizing. Differences in the scope of theories are noted. Connections between theory and hypothesis testing and research design are addressed, especially for nonexperimental or correlational research.

Interpretation of the lime column penetration test

NASA Astrophysics Data System (ADS)

Liyanapathirana, D. S.; Kelly, R. B.

2010-06-01

Dry soil mix (DSM) columns are used to reduce the settlement and to improve the stability of embankments constructed on soft clays. During construction the shear strength of the columns needs to be confirmed for compliance with technical assumptions. A specialized blade shaped penetrometer known as the lime column probe, has been developed for testing DSM columns. This test can be carried out as a pull out resistance test (PORT) or a push in resistance test (PIRT). The test is considered to be more representative of average column shear strength than methods that test only a limited area of the column. Both PORT and PIRT tests require empirical correlations of measured resistance to an absolute measure of shear strength, in a similar manner to the cone penetration test. In this paper, finite element method is used to assess the probe factor, N, for the PORT test. Due to the large soil deformations around the probe, an Arbitrary Lagrangian Eulerian (ALE) based finite element formulation has been used. Variation of N with rigidity index and the friction at the probe-soil interface are investigated to establish a range for the probe factor.

Role to Be Played by Independent Geotechnical Supervision in the Foundation for Bridge Construction

NASA Astrophysics Data System (ADS)

Sobala, Dariusz; Rybak, Jarosław

2017-10-01

Some remarks concerning the necessity of employing an independent and over all ethical geotechnical survey were presented in the paper. Starting from the design phase, through the whole construction process, the importance of geotechnical engineer is stated in legal acts. Numerous testing technologies serve for the calibration of geotechnical technologies and allow for confirming the quality and capacity of piles. Special emphasis was payed to the involvement of scientifical and research institutions which can not only serve services but also can postprocess and methodize collected data. Such databases enable for new codes, methods and recommendations. Selection of deep foundations for bridge-type structures is most often dependent on complex geotechnical conditions, concentrated loads and constraints for pier displacements. Besides the last ones, prior to more common introduction of the design-construct system, could be a convenient justification for design engineer, who imposed deep foundation because he did not want or was not able to estimate the effect of pier settlement on civil engineering structure. The paper provides some notes about the need to engage a geotechnical supervising service of high competency and ethical quality during engineering and construction stages of foundations for bridge-type structures where legal requirements are of special consideration. Successive stages of projects are reviewed and research methods used for current calibration of geotechnical technologies and verification of geotechnical work quality are analysed. Special attention is given to potential involvement of independent R&D institutions which, apart from rendering specific services, also collect and systemize the research results thus enabling, in the long term, to revise engineering standards, instructions and guidelines.

Comparative High Voltage Impulse Measurement

PubMed Central

FitzPatrick, Gerald J.; Kelley, Edward F.

1996-01-01

A facility has been developed for the determination of the ratio of pulse high voltage dividers over the range from 10 kV to 300 kV using comparative techniques with Kerr electro-optic voltage measurement systems and reference resistive voltage dividers. Pulse voltage ratios of test dividers can be determined with relative expanded uncertainties of 0.4 % (coverage factor k = 2 and thus a two standard deviation estimate) or less using the complementary resistive divider/Kerr cell reference systems. This paper describes the facility and specialized procedures used at NIST for the determination of test voltage divider ratios through comparative techniques. The error sources and special considerations in the construction and use of reference voltage dividers to minimize errors are discussed, and estimates of the measurement uncertainties are presented. PMID:27805083

The CEC Professional Standards: A Foucauldian Genealogy of the Re/construction of Special Education

ERIC Educational Resources Information Center

Ashton, Jennifer Randhare

2011-01-01

This paper presents a Foucauldian analysis of the 2003 Council for Exceptional Children (CEC) Professional Standards. It examines the role of the CEC and their professional standards in the construction of the special educator and the student with disabilities and the potential implications that these constructions have for inclusive education.…

Special Bohr-Sommerfeld Lagrangian submanifolds

NASA Astrophysics Data System (ADS)

Tyurin, N. A.

2016-12-01

We introduce a new notion in symplectic geometry, that of speciality for Lagrangian submanifolds satisfying the Bohr- Sommerfeld condition. We show that it enables one to construct finite-dimensional moduli spaces of special Bohr- Sommerfeld Lagrangian submanifolds with respect to any ample line bundle on an algebraic variety with a Hodge metric regarded as the symplectic form. This construction can be used to study mirror symmetry.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Frost-protected shallow foundations (FPSFs) offer a proven technology designed to substantially lower construction costs in colder climates, enhancing housing affordability for families in many parts of the United States. This document provides step-by-step procedures to assist building professionals in designing and laying a slab- on-grade FPSF. FPSFs save money over conventional designs by requiring less excavation to construct a frost-proof foundation. It is specially insulated along its perimeter to raise the temperature of the surrounding ground and decrease frost penetration, thus allowing for the construction of a substantially shallower foundation. The FPSF is considered standard practice for homes in Scandinavia,more » where 40 years of field testing has proven it to be economical to construct, durable, and energy efficient. HUD strongly encourages wide spread adoption of FPSF technology in the United States and its incorporation into major model building codes.« less

Design, Specification and Construction of Specialized Measurement System in the Experimental Building

NASA Astrophysics Data System (ADS)

Fedorczak-Cisak, Malgorzata; Kwasnowski, Pawel; Furtak, Marcin; Hayduk, Grzegorz

2017-10-01

Experimental buildings for “in situ” research are a very important tool for collecting data on energy efficiency of the energy-saving technologies. One of the most advanced building of this type in Poland is the Maloposkie Laboratory of Energy-saving Buildings at Cracow University of Technology. The building itself is used by scientists as a research object and research tool to test energy-saving technologies. It is equipped with a specialized measuring system consisting of approx. 3 000 different sensors distributed in technical installations and structural elements of the building (walls, ceilings, cornices) and the ground. The authors of the paper will present the innovative design and technology of this specialized instrumentation. They will discuss issues arising during the implementation and use of the building.

USC/AIAA student get away special project liquid droplet collector experiment

NASA Technical Reports Server (NTRS)

Levesque, Raymond J., II

1987-01-01

This experimental payload was developed in order to observe, in a micro-gravity vacuum environment, the characteristics and stability of a thin fluid film flowing across a slightly curved surface. The test apparatus was designed based upon various ground-based thin film investigations, combined with the constraints imposed by the rigors of launch and the space environment. Testing of the fluid test article at atmospheric pressure and in vacuum verified the design provisions employed concerning ultra-low inlet pressure pump construction, as well as confirming expected pressure losses in the system. During the course of hardware development and construction modifications were required; however, the overall payload configuration remained largely unchanged. This will allow for modification and reflight of the apparatus based upon the findings of the initial flight. The specific applications of this experiment include Liquid Droplet Radiator development and various forms of material transport in vacuum.

Pediatric Perimeter—A Novel Device to Measure Visual Fields in Infants and Patients with Special Needs

PubMed Central

Satgunam, PremNandhini; Datta, Sourav; Chillakala, Koteswararao; Bobbili, Karthik R.; Joshi, Dhruv

2017-01-01

Purpose There are no commercially available devices to measure visual fields in infants. We developed a device, “Pediatric Perimeter,” that quantifies visual field extent (VFE) for infants. We describe the construction, validation, and use of this device. Methods A hemispherical dome with light emitting diodes (LEDs) was constructed. The LEDs were controlled using a computer program to measure reaction time (RT) to gross visual fields (GVF) and the VFE. Participants were tested in supine position in a dark room. Eye or head movement towards the stimuli was monitored with an infrared (IR) camera. Validation was done on 10 adults (mean age: 24.4 ± 5 years) with tunnel vision simulator. Results Perimetry was performed on 19 infants (age: 2.3–12 months), five infants with normal milestones. GVF and VFE were estimated in 17 and 7 infants, respectively. Median RT of infants with developmental delay was 663 ms and 380 ms for healthy infants. Also, 14 children (age: 14 months–6 years) with developmental delay and five patients with cognitive impairment were tested. Conclusion Visual field isopter and RT can be examined with the Pediatric Perimeter device on infants and patients with special needs. Further testing on infants will need to assess the repeatability. A large-scale study will be needed to compare typically developing infants and infants with delayed milestones with this device. Translational Relevance Quantifiable parameters obtained with this device can be used as outcome measures in clinical examination of infants and patients with special needs. This device can be used in pediatric, neurology, and ophthalmology clinics. PMID:28685105

25 CFR 1000.243 - What special provisions must be included in an AFA that contains a construction program?

Code of Federal Regulations, 2010 CFR

2010-04-01

... AMENDMENTS TO THE INDIAN SELF-DETERMINATION AND EDUCATION ACT Construction § 1000.243 What special provisions... building codes and applicable engineering standards, appropriate for the particular project; and (3...

The assessment of function: How is it measured? A clinical perspective

PubMed Central

Reiman, Michael P; Manske, Robert C

2011-01-01

Testing for outcome or performance can take many forms; including multiple iterations of self-reported measures of function (an assessment of the individual’s perceived dysfunction) and/or clinical special tests (which are primarily assessments of impairments). Typically absent within these testing mechanisms is whether or not one can perform a specific task associated with function. The paper will operationally define function, discuss the construct of function within the disablement model, will overview the multi-dimensional nature of ‘function’ as a concept, will examine the current evidence for functional testing methods, and will propose a functional testing continuum. Limitations of functional performance testing will be discussed including recommendations for future research. PMID:22547919

Innovative opto-mechanical design of a laser head for compact thin-disk

NASA Astrophysics Data System (ADS)

Macúchová, Karolina; Smrž, Martin; Řeháková, Martina; Mocek, Tomáš

2016-11-01

We present recent progress in design of innovative versatile laser head for lasers based on thin-disk architecture which are being constructed at the HiLASE centre of the IOP in the Czech Republic. Concept of thin-disk laser technology allows construction of lasers providing excellent beam quality with high average output power and optical efficiency. Our newly designed thin-disk carrier and pump module comes from optical scheme consisting of a parabolic mirror and roof mirrors proposed in 90's. However, mechanical parts and a cooling system were in-house simplified and tailor-made to medium power lasers since no suitable setup was commercially available. Proposed opto-mechanical design is based on stable yet easily adjustable mechanics. The only water nozzle-cooled component is a room-temperature-operated thindisk mounted on a special cooling finger. Cooling of pump optics was replaced by heat conductive transfer from mirrors made of special Al alloy to a massive brass baseplate. Such mirrors are easy to manufacture and very cheap. Presented laser head was manufactured and tested in construction of Er and Yb doped disk lasers. Details of the latest design will be presented.

Accelerated stress testing of thin film solar cells: Development of test methods and preliminary results

NASA Technical Reports Server (NTRS)

Lathrop, J. W.

1985-01-01

If thin film cells are to be considered a viable option for terrestrial power generation their reliability attributes will need to be explored and confidence in their stability obtained through accelerated testing. Development of a thin film accelerated test program will be more difficult than was the case for crystalline cells because of the monolithic construction nature of the cells. Specially constructed test samples will need to be fabricated, requiring committment to the concept of accelerated testing by the manufacturers. A new test schedule appropriate to thin film cells will need to be developed which will be different from that used in connection with crystalline cells. Preliminary work has been started to seek thin film schedule variations to two of the simplest tests: unbiased temperature and unbiased temperature humidity. Still to be examined are tests which involve the passage of current during temperature and/or humidity stress, either by biasing in the forward (or reverse) directions or by the application of light during stress. Investigation of these current (voltage) accelerated tests will involve development of methods of reliably contacting the thin conductive films during stress.

Environmental Assessment (EA): Proposed Software Facilities, Hill Air Force Base, Utah

DTIC Science & Technology

2011-04-19

retention facilities ; • connections to adjacent buried utilities consisting of water, electricity, natural gas, telephone/ data , sanitary sewer, and storm...engineering, development, and testing workloads for F-22 and F-35 aircraft. Military construction (MILCON) project data explain existing facilities ...Existing Facilities MILCON project data state there are no facilities on Hill AFB with adequate security to house the specialized laboratory space or

Third Annual Joint Service Pollution Prevention Conference and Exhibition. "Achieving Compliance Through Pollution Prevention"

DTIC Science & Technology

1998-01-01

ASTM D5229, "Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials." Sandwich...and pollution prevention. Methods and techniques have been established to make building disassembly and salvage cost-competitive with complete...specialized construction methods . • If natural resource conservation is a goal, consider timber framing using sustainably harvested timber, and

Aeronautical engineering: A special bibliography with indexes, supplement 49

NASA Technical Reports Server (NTRS)

1974-01-01

The bibliography contains 368 abstract citations of reports, journal articles, and other documents concerned with the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. Research and development in aerodynamics, aeronautics, and ground support equipment are also treated. Subject, personal, and contract number indexes are included for ease of access.

Iowa SIP: Chapter 33 - Special Regulations and Construction Permit Requirements for Major Stationary Sources - Prevention of Significant Deterioration (PSD) of Air Quality

EPA Pesticide Factsheets

EPA Approved Iowa Regulations - 40 CFR 52.820(c) Chapter 33 - Special Regulations and Construction Permit Requirements for Major Stationary Sources - Prevention of Significant Deterioration (PSD) of Air Quality

Adhesives and the ATS satellite. [construction of honeycomb panels

NASA Technical Reports Server (NTRS)

Hancock, F. E.

1972-01-01

Adhesives in the ATS satellite allow the designers to save weight, simplify design and fabrication and provide thermal and electrical conductivity or resistivity as required. The selections of adhesives are restricted to those few which can pass rigorous outgassing tests in order to avoid contaminating lenses and thermal control surfaces in space. An epoxy adhesive is used to construct the honeycomb panels which constitute most of the satellite's structure. General purpose epoxy adhesives hold doublers and standoffs in place and bond the truss to its fittings. Specialized adhesives include a high temperature resistant polyamide, a flexible polyurethane and filled epoxies which conduct heat or electricity.

Issues and Strategies for Improving Constructibility.

DTIC Science & Technology

1988-09-01

materials. First, the roof design called for the use of an asphalt coated roof felt layer below an EPDM membrane. The asphalt coated felt is not needed when a...being prepared by people trained in subjects foreign to construction. As designers, we were in fact contractually and professionally isolated from...specially constructed for sound isolation . The architect* correctly specified special sound seals around the doors between the rooms in this area, but

Environmental Assessment -- Hydrothermal Geothermal Subprogram

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1979-06-01

This environmental impact assessment addresses the design, construction, and operation of an electric generating plant (3 to 4 MWe) and research station (Hawaii Geothermal Research Station (HGRS)) in the Puna district on the Island of Hawaii. The facility will include control and support buildings, parking lots, cooling towers, settling and seepage ponds, the generating plant, and a visitors center. Research activities at the facility will evaluate the ability of a successfully flow-tested well (42-day flow test) to provide steam for power generation over an extended period of time (two years). In future expansion, research activities may include direct heat applicationsmore » such as aquaculture and the effects of geothermal fluids on various plant components and specially designed equipment on test modules. Construction-related impacts would be relatively minor. Construction of the facility will require the distance of about 1.7 ha (4.1 acres). No further disturbance is anticipated, unless it becomes necessary to replace the seepage pond with an injection well, because the production well is in service and adjacent roads and transmission lines are adequate. Disruption of competing land uses will be minimal, and loss of wildlife habitat will be acceptable. Noise should not significantly affect wildlife and local residents; the most noise activities (well drilling and flow testing) have been completed. Water use during construction will not be large, and impacts on competing uses are unlikely. Socio-economic impacts will be small because the project will not employ a large number of local residents and few construction workers will need to find local housing.« less

48 CFR 1436.270-5 - Part IV-Representations and instructions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... for award. Identify all factors that will be considered in awarding the contract (See, for example... THE INTERIOR SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 1436.270-5 Part IV—Representations and instructions. The CO shall...

48 CFR 1436.270-5 - Part IV-Representations and instructions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for award. Identify all factors that will be considered in awarding the contract (See, for example... THE INTERIOR SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 1436.270-5 Part IV—Representations and instructions. The CO shall...

Testing of Confining Pressure Impacton Explosion Energy of Explosive Materials

NASA Astrophysics Data System (ADS)

Drzewiecki, Jan; Myszkowski, Jacek; Pytlik, Andrzej; Pytlik, Mateusz

2017-06-01

This paper presents the results of testing the explosion effects of two explosive charges placed in an environment with specified values of confining pressure. The aim of this study is to determine the impact of variable environmental conditions on the suitability of particular explosives for their use in the prevention of natural hazards in hard coal mining. The research results will contribute to improving the efficiency of currently adopted technologies of natural hazard prevention and aid in raising the level of occupational safety. To carry out the subject matter measurements, a special test stand was constructed which allows the value of the initial pressure inside the chamber, which constitutes its integral part, to be altered before the detonation of the charge being tested. The obtained characteristics of the pressure changes during the explosion of the analysed charge helped to identify the work (energy) which was produced during the process. The test results are a valuable source of information, opening up new possibilities for the use of explosives, the development of innovative solutions for the construction of explosive charges and their initiation.

Better Thinking and Clearer Communication Will Help Special Education

ERIC Educational Resources Information Center

Kauffman, James M.; Badar, Jeanmarie

2014-01-01

The authors argue that insufficient attention has been given to foundational concepts in special education. Two classes of foundational concepts are discussed: human constructions and logico-mathematical facts. Four human constructions are examined: (1) making teaching most important, (2) discriminating among ideas, (3) choosing conceptual models,…

48 CFR 53.106 - Special construction and printing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... (CONTINUED) CLAUSES AND FORMS FORMS General 53.106 Special construction and printing. Contracting offices may... vertical lines omitted (for listing of supplies and services, unit, etc.); (2) As reproducible masters; and... reproducible masters. (c) SF 44— (1) With serial numbers and contracting office name and address; and/or (2) On...

Innovative FRF measurement technique for frequency based substructuring method

NASA Astrophysics Data System (ADS)

Mirza, W. I. I. Wan Iskandar; Rani, M. N. Abdul; Ayub, M. A.; Yunus, M. A.; Omar, R.; Mohd Zin, M. S.

2018-04-01

In this paper, frequency based substructuring (FBS) is used in an attempt to predict the dynamic behaviour of an assembled structure. The assembled structure which consists of two beam substructures namely substructure A (finite element model) and substructure B (experimental model) was tested. The FE model of substructure A was constructed by using 3D elements and the Frequency Response Functions (FRFs) were derived viaa FRF synthesis method. A specially customised bolt was used to allow the attachment of sensors and excitation to be made at theinterfaces of substructure B, and the FRFs were measured by using an impact testing method. Both substructures A and B were then coupled by using the FBS method for the prediction of FRFs. The coupled FRF obtained was validated with the measured FRF counterparts. This work revealed that by implementing a specially customised bolt during the measurement of FRF at the interface, led to an improvement in the FBS predicted results.

Friction characteristics of 20 x 4.4, type 7, aircraft tires constructed with different tread rubber compounds

NASA Technical Reports Server (NTRS)

Dreher, R. C.; Yager, T. J.

1976-01-01

A test program was conducted at the Langley aircraft landing loads and traction facility to evaluate the friction characteristics of 20 x 4.4, type, aircraft tires constructed with experimental cut-resistant, tread rubber compounds. These compounds consisted of different blends of natural rubber (NR) and an alfin catalyzed styrene-butadiene copolymer rubber (SBR). One tire having a blend of 30 SBR and 70 NR and another having a blend of 60 SBR and 40 NR in the tread were tested together with a standard production tire with no SBR content in the tread rubber. The results of this investigation indicated that the test tires constructed with the special cut-resistant tread rubber compositions did not suffer any significant degradation in tire friction capability when compared with the standard tire. In general, tire friction capability decreased with increasing speed and surface wetness condition. As yaw angle increased, tire braking capability decreased while tire cornering capability increased. Tread-wear data based on number of brake cycles, however, suggested that the tires with alfin SBR blends experienced significantly greater wear than the standard production tire.

Parameterized Linear Longitudinal Airship Model

NASA Technical Reports Server (NTRS)

Kulczycki, Eric; Elfes, Alberto; Bayard, David; Quadrelli, Marco; Johnson, Joseph

2010-01-01

A parameterized linear mathematical model of the longitudinal dynamics of an airship is undergoing development. This model is intended to be used in designing control systems for future airships that would operate in the atmospheres of Earth and remote planets. Heretofore, the development of linearized models of the longitudinal dynamics of airships has been costly in that it has been necessary to perform extensive flight testing and to use system-identification techniques to construct models that fit the flight-test data. The present model is a generic one that can be relatively easily specialized to approximate the dynamics of specific airships at specific operating points, without need for further system identification, and with significantly less flight testing. The approach taken in the present development is to merge the linearized dynamical equations of an airship with techniques for estimation of aircraft stability derivatives, and to thereby make it possible to construct a linearized dynamical model of the longitudinal dynamics of a specific airship from geometric and aerodynamic data pertaining to that airship. (It is also planned to develop a model of the lateral dynamics by use of the same methods.) All of the aerodynamic data needed to construct the model of a specific airship can be obtained from wind-tunnel testing and computational fluid dynamics

Credit BG. View west of Test Stand "D" complex, with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Credit BG. View west of Test Stand "D" complex, with ends of Dd (left) and Dy (right) station ejectors in view. Steam piping from accumulator (sphere) to ejectors is apparent; long horizontal loops in the pipes permit expansion and contraction without special joints. The small platform straddling the Dd ejector (near the accumulator) was originally constructed for a "Hyprox" steam generator which supplied steam to the Dd ejector before the accumulator and Dy stand were built. Note ejectors on top of interstage condenser in Test Stand "D" tower. Metal shed in far right background is for storage - Jet Propulsion Laboratory Edwards Facility, Test Stand D, Edwards Air Force Base, Boron, Kern County, CA

Mutation Testing for Effective Verification of Digital Components of Physical Systems

NASA Astrophysics Data System (ADS)

Kushik, N. G.; Evtushenko, N. V.; Torgaev, S. N.

2015-12-01

Digital components of modern physical systems are often designed applying circuitry solutions based on the field programmable gate array technology (FPGA). Such (embedded) digital components should be carefully tested. In this paper, an approach for the verification of digital physical system components based on mutation testing is proposed. The reference description of the behavior of a digital component in the hardware description language (HDL) is mutated by introducing into it the most probable errors and, unlike mutants in high-level programming languages, the corresponding test case is effectively derived based on a comparison of special scalable representations of the specification and the constructed mutant using various logic synthesis and verification systems.

Reactor transient control in support of PFR/TREAT TUCOP experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burrows, D.R.; Larsen, G.R.; Harrison, L.J.

1984-01-01

Unique energy deposition and experiment control requirements posed bythe PFR/TREAT series of transient undercooling/overpower (TUCOP) experiments resulted in equally unique TREAT reactor operations. New reactor control computer algorithms were written and used with the TREAT reactor control computer system to perform such functions as early power burst generation (based on test train flow conditions), burst generation produced by a step insertion of reactivity following a controlled power ramp, and shutdown (SCRAM) initiators based on both test train conditions and energy deposition. Specialized hardware was constructed to simulate test train inputs to the control computer system so that computer algorithms couldmore » be tested in real time without irradiating the experiment.« less

Study of foldable elastic tubes for large space structure applications, phase 1

NASA Technical Reports Server (NTRS)

Jones, I. W.; Boateng, C.; Williams, C. D.

1980-01-01

Structural members that might be suitable for strain energy deployable structures, are discussed with emphasis on a thin-walled cylindrical tube with a cross-section that is called 'bi-convex'. The design of bi-convex tube test specimens and their fabrication are described as well as the design and construction of a special purpose testing machine to determine the deployment characteristics. The results of the first series of tests were quite mixed, but clearly revealed that since most of the specimens failed to deploy completely, due to a buckling problem, this type of tube requires some modification in order to be viable.

Validation of World Health Organization Assessment Schedule 2.0 in specialized somatic rehabilitation services in Norway.

PubMed

Moen, Vegard Pihl; Drageset, Jorunn; Eide, Geir Egil; Klokkerud, Mari; Gjesdal, Sturla

2017-02-01

The World Health Organization Disability Assessment Schedule (WHODAS) 2.0 is a generic instrument to assess disability covering six domains. The purpose of this study was to investigate the potential of the instrument for monitoring disability in specialized somatic rehabilitation by testing reliability, construct validity and responsiveness of WHODAS 2.0, Norwegian version, among patients with various health conditions. For taxonomy, terminology and definitions, the Consensus-based Standards for the Selection of Health Measurement Instruments were followed. Reproducibility was investigated by the intra-class correlation coefficient (ICC) in a randomly selected sample. Internal consistency was assessed by Cronbach's alpha. Construct validity was evaluated by correlations between WHODAS 2.0 and the Medical Outcomes Study 36-item Short Form, and fit of the hypothesized structure using confirmatory factor analysis (CFA). Responsiveness was evaluated in another randomly selected sample by testing a priori formulated hypotheses. Nine hundred seventy patients were included in the study. Reproducibility and responsiveness were evaluated in 53 and 104 patients, respectively. The ICC for the WHODAS 2.0 domains ranged from 0.63 to 0.84 and was 0.87 for total score. Cronbach's alpha for domains ranged from 0.75 to 0.94 and was 0.93 for total score. For construct validity, 6 of 12 expected correlations were confirmed and CFA did not achieve satisfactory fit indices. For responsiveness, 3 of 8 hypotheses were confirmed. The Norwegian version of WHODAS 2.0 showed moderate to satisfactory reliability and moderate validity in rehabilitation patients. However, the present study indicated possible limitations in terms of responsiveness.

Identification of high school students' ability level of constructing free body diagrams to solve restricted and structured response items in force matter

NASA Astrophysics Data System (ADS)

Rahmaniar, Andinisa; Rusnayati, Heni; Sutiadi, Asep

2017-05-01

While solving physics problem particularly in force matter, it is needed to have the ability of constructing free body diagrams which can help students to analyse every force which acts on an object, the length of its vector and the naming of its force. Mix method was used to explain the result without any special treatment to participants. The participants were high school students in first grade totals 35 students. The purpose of this study is to identify students' ability level of constructing free body diagrams in solving restricted and structured response items. Considering of two types of test, every student would be classified into four levels ability of constructing free body diagrams which is every level has different characteristic and some students were interviewed while solving test in order to know how students solve the problem. The result showed students' ability of constructing free body diagrams on restricted response items about 34.86% included in no evidence of level, 24.11% inadequate level, 29.14% needs improvement level and 4.0% adequate level. On structured response items is about 16.59% included no evidence of level, 23.99% inadequate level, 36% needs improvement level, and 13.71% adequate level. Researcher found that students who constructed free body diagrams first and constructed free body diagrams correctly were more successful in solving restricted and structured response items.

Special Education Teacher Quality and Preparation: Exposing Foundations, Constructing a New Model

ERIC Educational Resources Information Center

Brownell, Mary T.; Sindelar, Paul T.; Kiely, Mary Theresa; Danielson, Louis C.

2010-01-01

The authors trace changes in conceptions of special education teacher quality and preparation in response to developments in special education research, policy, and practice. This developmental arc is a backdrop for understanding contemporary special education practice and charting future directions for preparing special education teachers.…

75 FR 68669 - Loan Guaranty: Assistance to Eligible Individuals in Acquiring Specially Adapted Housing; Cost-of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-08

... Specially Adapted Housing; Cost-of-Construction Index AGENCY: Department of Veterans Affairs. ACTION: Notice... SAH assistance annually based on a residential home cost-of-construction index. The Secretary uses the Turner Building Cost Index for this purpose. During the most recent calendar year for which the Turner...

Advances in Special Education: Volume I. Basic Constructs and Theoretical Orientations. A Research Annual.

ERIC Educational Resources Information Center

Keogh, Barbara K., Ed.

Intended for graduate students in special education, the text presents seven author contributed papers dealing with theoretical issues in the field. M. Faust and W. Faust ("Cognitive Constructing: Levels of Processing and Developmental Change") consider cognitive processing from a developmental perspective. In "Memory Processes in Exceptional…

Social Constructions of Young Children in "Special", "Inclusive" and Home Environments

ERIC Educational Resources Information Center

Nind, Melanie; Flewitt, Rosie; Payler, Jane

2011-01-01

The paper tells of the social constructs surrounding young children with learning difficulties in their home, "special" early education setting and "inclusive" or mainstream early education setting in England. The exploratory study focused on how three- to four-year-old children made sense of their environments and how their…

New construction of eigenstates and separation of variables for SU( N) quantum spin chains

NASA Astrophysics Data System (ADS)

Gromov, Nikolay; Levkovich-Maslyuk, Fedor; Sizov, Grigory

2017-09-01

We conjecture a new way to construct eigenstates of integrable XXX quantum spin chains with SU( N) symmetry. The states are built by repeatedly acting on the vacuum with a single operator B good( u) evaluated at the Bethe roots. Our proposal serves as a compact alternative to the usual nested algebraic Bethe ansatz. Furthermore, the roots of this operator give the separated variables of the model, explicitly generalizing Sklyanin's approach to the SU( N) case. We present many tests of the conjecture and prove it in several special cases. We focus on rational spin chains with fundamental representation at each site, but expect many of the results to be valid more generally.

Harnessing cognitive neuroscience to develop new treatments for improving cognition in schizophrenia: CNTRICS selected cognitive paradigms for animal models.

PubMed

Moore, Holly; Geyer, Mark A; Carter, Cameron S; Barch, Deanna M

2013-11-01

Over the past two decades, the awareness of the disabling and treatment-refractory effects of impaired cognition in schizophrenia has increased dramatically. In response to this still unmet need in the treatment of schizophrenia, the Cognitive Neuroscience Treatment Research to Improve Cognition in Schizophrenia (CNTRICS) initiative was developed. The goal of CNTRICS is to harness cognitive neuroscience to develop a brain-based set of tools for measuring cognition in schizophrenia and to test new treatments. CNTRICS meetings focused on development of tasks with cognitive construct validity for use in both human and animal model studies. This special issue presents papers discussing the cognitive testing paradigms selected by CNTRICS for animal model systems. These paradigms are designed to measure cognitive constructs within the domains of perception, attention, executive function, working memory, object/relational long-term memory, and social/affective processes. Copyright © 2013. Published by Elsevier Ltd.

Harnessing cognitive neuroscience to develop new treatments for improving cognition in schizophrenia: CNTRICS selected cognitive paradigms for animal models

PubMed Central

Moore, Holly; Geyer, Mark A.; Carter, Cameron S.; Barch, Deanna M.

2014-01-01

Over the past two decades, the awareness of the disabling and treatment-refractory effects of impaired cognition in schizophrenia has increased dramatically. In response to this still unmet need in the treatment of schizophrenia, the Cognitive Neuroscience Treatment Research to Improve Cognition in Schizophrenia (CNTRICS) initiative was developed. The goal of CNTRICS is to harness cognitive neuroscience to develop a brain-based set of tools for measuring cognition in schizophrenia and to test new treatments. CNTRICS meetings focused on development of tasks with cognitive construct validity for use in both human and animal model studies. This special issue presents papers discussing the cognitive testing paradigms selected by CNTRICS for animal model systems. These paradigms are designed to measure cognitive constructs within the domains of perception, attention, executive function, working memory, object/relational long-term memory, and social/affective processes. PMID:24090823

Space station systems analysis study. Part 2, Volume 3: Appendixes, Book 1. Program requirements documentation

NASA Technical Reports Server (NTRS)

1977-01-01

The objective elements representative of the kinds of space activities that will be supported by the space construction base (SCB) are discussed in (1) a brief mission overview including the primary purpose and general objectives; (2) descriptions of the processes involved (where applicable), the mission hardware, the principal activities to be undertaken, the test requirements, and the principal tests; and (3) the SCB requirements including such items as special devices (e.g., fabrication modules, assembly or construction fixtures, cranes, and airlocks), power, data management and communications, waste management, environmental control, safety, and logistics. Each program option is then described in terms of the objective elements it supports, its orbit, the general makeup of the SCB, the transportation approach, and the program schedule goals. The specific requirements that are imposed on the SCB in order to support program option L are given.

Prediction of light aircraft interior sound pressure level from the measured sound power flowing in to the cabin

NASA Technical Reports Server (NTRS)

Atwal, Mahabir S.; Heitman, Karen E.; Crocker, Malcolm J.

1986-01-01

The validity of the room equation of Crocker and Price (1982) for predicting the cabin interior sound pressure level was experimentally tested using a specially constructed setup for simultaneous measurements of transmitted sound intensity and interior sound pressure levels. Using measured values of the reverberation time and transmitted intensities, the equation was used to predict the space-averaged interior sound pressure level for three different fuselage conditions. The general agreement between the room equation and experimental test data is considered good enough for this equation to be used for preliminary design studies.

The appropriateness of the NC state-mandated reading competency test for deaf students as a criterion for high school graduation.

PubMed

Lollis, Jana; LaSasso, Carol

2009-01-01

Deaf students consistently score lower on standardized measures of reading comprehension than their hearing peers. Most of the studies that have been conducted to explain this phenomenon have focused on variables within the reader, and important differences have been found between deaf and hearing readers. More recently, in the face of increasingly high-stakes consequences, researchers are looking "outside" the reader, at the tests themselves, to determine whether there are fairness issues for special populations, such as deaf students. The study reported here, the first of its kind with deaf students, examines the North Carolina (NC) reading comprehension test. The study employs the same method used originally by NC to determine its appropriateness of the test for the general population of NC students. The experts in this article, like those in the original construction of the NC test, are familiar with the content of the reading curriculum in NC; however, the raters in this article bring a special perspective related to teaching and testing reading of students who are deaf. Findings from this study raise questions about the appropriateness of the NC reading test for deaf students. Implications for future research and instructional practice are discussed.

46 CFR 190.01-15 - Special consideration.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Special consideration. 190.01-15 Section 190.01-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS CONSTRUCTION AND ARRANGEMENT Hull Structure § 190.01-15 Special consideration. (a) Special consideration will...

14 CFR Special Federal Aviation... - Construction or Alteration in the Vicinity of the Private Residence of the President of the...

Code of Federal Regulations, 2011 CFR

2011-01-01

... of the Private Residence of the President of the United States Federal Special Federal Aviation Regulation No. 98 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Federal Aviation Regulation No. 98—Construction or Alteration in the Vicinity of the Private Residence of...

On new classes of solutions of nonlinear partial differential equations in the form of convergent special series

NASA Astrophysics Data System (ADS)

Filimonov, M. Yu.

2017-12-01

The method of special series with recursively calculated coefficients is used to solve nonlinear partial differential equations. The recurrence of finding the coefficients of the series is achieved due to a special choice of functions, in powers of which the solution is expanded in a series. We obtain a sequence of linear partial differential equations to find the coefficients of the series constructed. In many cases, one can deal with a sequence of linear ordinary differential equations. We construct classes of solutions in the form of convergent series for a certain class of nonlinear evolution equations. A new class of solutions of generalized Boussinesque equation with an arbitrary function in the form of a convergent series is constructed.

48 CFR 836.603 - Collecting data on and appraising firms qualifications.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Construction and Facilities Management, for Central Office; the Director, Office of Construction Management... VETERANS AFFAIRS SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect...

48 CFR 836.603 - Collecting data on and appraising firms qualifications.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Construction and Facilities Management, for Central Office; the Director, Office of Construction Management... VETERANS AFFAIRS SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect...

48 CFR 836.603 - Collecting data on and appraising firms qualifications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Construction and Facilities Management, for Central Office; the Director, Office of Construction Management... VETERANS AFFAIRS SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect...

48 CFR 836.603 - Collecting data on and appraising firms qualifications.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Construction and Facilities Management, for Central Office; the Director, Office of Construction Management... VETERANS AFFAIRS SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect...

48 CFR 836.603 - Collecting data on and appraising firms qualifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Construction and Facilities Management, for Central Office; the Director, Office of Construction Management... VETERANS AFFAIRS SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect...

Introduction to the special section on mixture modeling in personality assessment.

PubMed

Wright, Aidan G C; Hallquist, Michael N

2014-01-01

Latent variable models offer a conceptual and statistical framework for evaluating the underlying structure of psychological constructs, including personality and psychopathology. Complex structures that combine or compare categorical and dimensional latent variables can be accommodated using mixture modeling approaches, which provide a powerful framework for testing nuanced theories about psychological structure. This special series includes introductory primers on cross-sectional and longitudinal mixture modeling, in addition to empirical examples applying these techniques to real-world data collected in clinical settings. This group of articles is designed to introduce personality assessment scientists and practitioners to a general latent variable framework that we hope will stimulate new research and application of mixture models to the assessment of personality and its pathology.

Evaluation of Acquisition Strategies for Image-Based Construction Site Monitoring

NASA Astrophysics Data System (ADS)

Tuttas, S.; Braun, A.; Borrmann, A.; Stilla, U.

2016-06-01

Construction site monitoring is an essential task for keeping track of the ongoing construction work and providing up-to-date information for a Building Information Model (BIM). The BIM contains the as-planned states (geometry, schedule, costs, ...) of a construction project. For updating, the as-built state has to be acquired repeatedly and compared to the as-planned state. In the approach presented here, a 3D representation of the as-built state is calculated from photogrammetric images using multi-view stereo reconstruction. On construction sites one has to cope with several difficulties like security aspects, limited accessibility, occlusions or construction activity. Different acquisition strategies and techniques, namely (i) terrestrial acquisition with a hand-held camera, (ii) aerial acquisition using a Unmanned Aerial Vehicle (UAV) and (iii) acquisition using a fixed stereo camera pair at the boom of the crane, are tested on three test sites. They are assessed considering the special needs for the monitoring tasks and limitations on construction sites. The three scenarios are evaluated based on the ability of automation, the required effort for acquisition, the necessary equipment and its maintaining, disturbance of the construction works, and on the accuracy and completeness of the resulting point clouds. Based on the experiences during the test cases the following conclusions can be drawn: Terrestrial acquisition has the lowest requirements on the device setup but lacks on automation and coverage. The crane camera shows the lowest flexibility but the highest grade of automation. The UAV approach can provide the best coverage by combining nadir and oblique views, but can be limited by obstacles and security aspects. The accuracy of the point clouds is evaluated based on plane fitting of selected building parts. The RMS errors of the fitted parts range from 1 to a few cm for the UAV and the hand-held scenario. First results show that the crane camera approach has the potential to reach the same accuracy level.

Design and test of a 100 ampere-hour nickel cadmium battery module

NASA Technical Reports Server (NTRS)

Gaston, S.; Wertheim, M.; Burgess, F. S.; Lehrfeld, D.; Winegard, A.

1973-01-01

A feasibility study was conducted on the design and construction of a flight-worthy replaceable battery module consisting of four 100 A.H. nickel-cadmium rechargeable cells for large manned space vehicles. The module is planned to weigh less than 43 pounds and be fully maintainable in a zero-g environment by one man without use of special tools. An active environmental control system was designed for the temperature control of the module.

48 CFR 2936.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2014 CFR

2014-10-01

... with architect-engineer firms. 2936.209 Section 2936.209 Federal Acquisition Regulations System DEPARTMENT OF LABOR GENERAL CONTRACTING REQUIREMENTS CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 2936.209 Construction contracts with architect-engineer firms. As...

48 CFR 2936.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2011 CFR

2011-10-01

... with architect-engineer firms. 2936.209 Section 2936.209 Federal Acquisition Regulations System DEPARTMENT OF LABOR GENERAL CONTRACTING REQUIREMENTS CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 2936.209 Construction contracts with architect-engineer firms. As...

48 CFR 2936.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2010 CFR

2010-10-01

... with architect-engineer firms. 2936.209 Section 2936.209 Federal Acquisition Regulations System DEPARTMENT OF LABOR GENERAL CONTRACTING REQUIREMENTS CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 2936.209 Construction contracts with architect-engineer firms. As...

48 CFR 2936.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2012 CFR

2012-10-01

... with architect-engineer firms. 2936.209 Section 2936.209 Federal Acquisition Regulations System DEPARTMENT OF LABOR GENERAL CONTRACTING REQUIREMENTS CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 2936.209 Construction contracts with architect-engineer firms. As...

Uniaxial Compressive Constitutive Relationship of Concrete Confined by Special-Shaped Steel Tube Coupled with Multiple Cavities

PubMed Central

Wu, Haipeng; Cao, Wanlin; Qiao, Qiyun; Dong, Hongying

2016-01-01

A method is presented to predict the complete stress-strain curves of concrete subjected to triaxial stresses, which were caused by axial load and lateral force. The stress can be induced due to the confinement action inside a special-shaped steel tube having multiple cavities. The existing reinforced confined concrete formulas have been improved to determine the confinement action. The influence of cross-sectional shape, of cavity construction, of stiffening ribs and of reinforcement in cavities has been considered in the model. The parameters of the model are determined on the basis of experimental results of an axial compression test for two different kinds of special-shaped concrete filled steel tube (CFT) columns with multiple cavities. The complete load-strain curves of the special-shaped CFT columns are estimated. The predicted concrete strength and the post-peak behavior are found to show good agreement within the accepted limits, compared with the experimental results. In addition, the parameters of proposed model are taken from two kinds of totally different CFT columns, so that it can be concluded that this model is also applicable to concrete confined by other special-shaped steel tubes. PMID:28787886

Uniaxial Compressive Constitutive Relationship of Concrete Confined by Special-Shaped Steel Tube Coupled with Multiple Cavities.

PubMed

Wu, Haipeng; Cao, Wanlin; Qiao, Qiyun; Dong, Hongying

2016-01-29

A method is presented to predict the complete stress-strain curves of concrete subjected to triaxial stresses, which were caused by axial load and lateral force. The stress can be induced due to the confinement action inside a special-shaped steel tube having multiple cavities. The existing reinforced confined concrete formulas have been improved to determine the confinement action. The influence of cross-sectional shape, of cavity construction, of stiffening ribs and of reinforcement in cavities has been considered in the model. The parameters of the model are determined on the basis of experimental results of an axial compression test for two different kinds of special-shaped concrete filled steel tube (CFT) columns with multiple cavities. The complete load-strain curves of the special-shaped CFT columns are estimated. The predicted concrete strength and the post-peak behavior are found to show good agreement within the accepted limits, compared with the experimental results. In addition, the parameters of proposed model are taken from two kinds of totally different CFT columns, so that it can be concluded that this model is also applicable to concrete confined by other special-shaped steel tubes.

14 CFR 25.619 - Special factors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Special factors. 25.619 Section 25.619... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction General § 25.619 Special factors. The factor of safety prescribed in § 25.303 must be multiplied by the highest pertinent special factor of safety...

26 CFR 48.4216(b)-3 - Constructive sale price; special rule for arm's-length sales.

Code of Federal Regulations, 2010 CFR

2010-04-01

... volume of sales which are at retail or to retailers, or both, is less than half the total industry dollar volume of sales at all levels of distribution by manufacturers, producers, or importers, including sales... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Constructive sale price; special rule for arm's...

"The Mall" and "the Plant": Choice and the Classed Construction of Possible Futures in Two Specialized Arts Programs

ERIC Educational Resources Information Center

Gaztambide-Fernández, Rubén; VanderDussen, Elena; Cairns, Kate

2014-01-01

This article explores how conceptions of choice and visions of the future are constructed within the context of specialized arts programs in two Canadian public high schools. The authors consider how discourses of the arts are implicated in the way that possible futures are envisioned differently, delimiting the range of choices available to…

75 FR 6858 - Certifications and Exemptions Under the International Regulations for Preventing Collisions at...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-12

... USS PHILIPPINE SEA (CG 58) is a vessel of the Navy which, due to its special construction and purpose... PHILIPPINE SEA (CG 58) is a vessel of the Navy which, due to its special construction and purpose, cannot... Table Five by revising the entry for USS PHILIPPINE SEA (CG 58), to read as follows: Sec. 706.2...

Site characterization and construction of a controlled shallow test site in central Mexico for archaeological and engineering applications

NASA Astrophysics Data System (ADS)

Rosado-Fuentes, A.; Arango-Galvan, C.; Arciniega-Ceballos, A.; Hernández-Quintero, J. E.; Mendo-Perez, G.

2017-12-01

A controlled shallow test site (CSTS) has been constructed at the UNAM Geomagnetic Observatory in Teoloyucan, central Mexico. The objective of the CSTS is to have a controlled place to test new developments and arrays that can be used for archaeological and engineering exploration, as well as to calibrate instruments, train students and for future research. The CSTS was built far enough not to influence the geomagnetic sensors and not be affected by noise sources. Special attention was given to the distribution and geometry of buried materials as well as the instruments used. Before the CSTS was built, a combination of near-surface, non-invasive geophysical techniques was performed to characterize the area of 20 by 32 meters. The methods include magnetometry, electromagnetic induction, ground penetrating radar (GPR), electrical resistivity tomography (ERT) and seismic refraction tomography (SRT). The GPR, SRT and ERT results show relatively flat interfaces. In general, the vertical gradient of the total magnetic field and the electric conductivity have very small variations, showing only one strong magnetic dipole associated to a shallow anomaly. These results indicate that the area is ideal for the construction of the test site. The CSTS consists on buried structures made with different materials and geometries (cubes, cylinders and tubes) commonly used as construction materials in Mexico since Pre-Hispanic times. These materials include concrete, reinforced concrete, wood, brick, adobe, basalt, tezontle and also empty space for controlling responses. The CSTS is versatile enough to be reshaped considering new geometries or materials and to conduct further investigations.

Construction of a Full-size Component of the ICRH System

NASA Astrophysics Data System (ADS)

Mantovani, S.; Sassi, M.; Coppi, B.

2012-10-01

The ICRH system is an important component of the Ignitor project and all efforts have been made to ensure that its design takes into account the construction experience gained in the most advanced laboratories. The system is designed to operate over a frequency range 80-120 MHz, which is consistent with the use of magnetic fields in the range 9-13 T. The maximum delivered power ranges from 8 MW (at 80 MHz) to 6 MW (at 120 MHz) distributed over 4 ports. Since the transition from a detailed design to the actual construction is not without surprises we have constructed a full size prototype of the VTL between the port flange and the antenna straps, with the external support and precise guiding system. The innovative quick latching system located at the end of the coaxial cable was successfully tested, providing perfect interference with the spring Be-Cu electrical contacts. Special care was given to the finishing of the inox surfaces, and to the TIG welds. Vacuum levels of 10-6, compatible with the limit of material degassing, and electrical tests up to 12 kV without discharges have been obtained. A revision of the other key components of the Ignitor machine has been undertaken, taking into account the experience gained in the fabrication of the corresponding prototypes.

[Improving the speech with a prosthetic construction].

PubMed

Stalpers, M J; Engelen, M; van der Stappen, J A A M; Weijs, W L J; Takes, R P; van Heumen, C C M

2016-03-01

A 12-year-old boy had problems with his speech due to a defect in the soft palate. This defect was caused by the surgical removal of a synovial sarcoma. Testing with a nasometer revealed hypernasality above normal values. Given the size and severity of the defect in the soft palate, the possibility of improving the speech with speech therapy was limited. At a centre for special dentistry an attempt was made with a prosthetic construction to improve the performance of the palate and, in that way, the speech. This construction consisted of a denture with an obturator attached to it. With it, an effective closure of the palate could be achieved. New measurements with acoustic nasometry showed scores within the normal values. The nasality in the speech largely disappeared. The obturator is an effective and relatively easy solution for palatal insufficiency resulting from surgical resection. Intrusive reconstructive surgery can be avoided in this way.

Vibration behaviour of foamed concrete floor with polypropylene and rise husk ash fibre

NASA Astrophysics Data System (ADS)

Azaman, N. A. Mohd; Ghafar, N. H. Abd; Ayub, N.; Ibrahim, M. Z.

2017-11-01

In the history of the construction industry, lightweight concrete or foamed concrete is a special concrete which can very useful in the construction sector because it is very lightweight and it can compact by itself at each angle of foamwork. Foamed concrete is one of lightweight concrete which widely used for floor construction due to its light weight and economic. The significant challenges in the floor design process are considering the vibration that needs improvements for the poor dynamic behaviour insulation. An alternative material to replace sand with certain amount of rice husk ash (RHA) and polypropylene was introduced. Research was determine the dynamic behavior of foam-polypropylene and foam-RHA concrete by using impact hammer test. The natural frequency for normal foamed concrete, 0.5 % of Polypropylene and 15% of RHA is 29.8 Hz, 29.3 Hz and 29.5 Hz respectively.

Three-dimensional organization of dermal fibroblasts by macromass culture.

PubMed

Deshpande, Manisha

2008-01-01

The three-dimensional organization of cells by high-cell-seeding-density culture, termed 'macromass culture', is described. By macromass culture, dermal fibroblasts can be made to organize themselves into a unified three-dimensional form without the aid of a scaffold, and macroscopic constructs, named macromasses, can be made wholly from cells. The sole factor causing three-dimensional organization is culture of cells at high cell seeding density per unit area. No scaffold or extraneous matrix is used for the generation of macromasses; they are of completely cellular origin. No other agents or external influences such as tissue-inducing chemicals, tissue-inducing growth factors, substratum with special properties, rotational culture, centrifugation etc. are employed for macromass formation, and all seeded cells become part of the cohesive construct. These three-dimensional constructs have the potential for use as in vitro tissue analogues, and a possible application for in vitro cytotoxicity testing is demonstrated.

A study on specialist or special disease clinics based on big data.

PubMed

Fang, Zhuyuan; Fan, Xiaowei; Chen, Gong

2014-09-01

Correlation analysis and processing of massive medical information can be implemented through big data technology to find the relevance of different factors in the life cycle of a disease and to provide the basis for scientific research and clinical practice. This paper explores the concept of constructing a big medical data platform and introduces the clinical model construction. Medical data can be collected and consolidated by distributed computing technology. Through analysis technology, such as artificial neural network and grey model, a medical model can be built. Big data analysis, such as Hadoop, can be used to construct early prediction and intervention models as well as clinical decision-making model for specialist and special disease clinics. It establishes a new model for common clinical research for specialist and special disease clinics.

48 CFR 2936.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2013 CFR

2013-10-01

... architect-engineer firms. 2936.209 Section 2936.209 Federal Acquisition Regulations System DEPARTMENT OF LABOR GENERAL CONTRACTING REQUIREMENTS CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 2936.209 Construction contracts with architect-engineer firms. As required by FAR...

Adaptation and niche construction in human prehistory: a case study from the southern Scandinavian Late Glacial

PubMed Central

Riede, Felix

2011-01-01

The niche construction model postulates that human bio-social evolution is composed of three inheritance domains, genetic, cultural and ecological, linked by feedback selection. This paper argues that many kinds of archaeological data can serve as proxies for human niche construction processes, and presents a method for investigating specific niche construction hypotheses. To illustrate this method, the repeated emergence of specialized reindeer (Rangifer tarandus) hunting/herding economies during the Late Palaeolithic (ca 14.7–11.5 kyr BP) in southern Scandinavia is analysed from a niche construction/triple-inheritance perspective. This economic relationship resulted in the eventual domestication of Rangifer. The hypothesis of whether domestication was achieved as early as the Late Palaeolithic, and whether this required the use of domesticated dogs (Canis familiaris) as hunting, herding or transport aids, is tested via a comparative analysis using material culture-based phylogenies and ecological datasets in relation to demographic/genetic proxies. Only weak evidence for sustained niche construction behaviours by prehistoric hunter–gatherer in southern Scandinavia is found, but this study nonetheless provides interesting insights into the likely processes of dog and reindeer domestication, and into processes of adaptation in Late Glacial foragers. PMID:21320895

Adaptation and niche construction in human prehistory: a case study from the southern Scandinavian Late Glacial.

PubMed

Riede, Felix

2011-03-27

The niche construction model postulates that human bio-social evolution is composed of three inheritance domains, genetic, cultural and ecological, linked by feedback selection. This paper argues that many kinds of archaeological data can serve as proxies for human niche construction processes, and presents a method for investigating specific niche construction hypotheses. To illustrate this method, the repeated emergence of specialized reindeer (Rangifer tarandus) hunting/herding economies during the Late Palaeolithic (ca 14.7-11.5 kyr BP) in southern Scandinavia is analysed from a niche construction/triple-inheritance perspective. This economic relationship resulted in the eventual domestication of Rangifer. The hypothesis of whether domestication was achieved as early as the Late Palaeolithic, and whether this required the use of domesticated dogs (Canis familiaris) as hunting, herding or transport aids, is tested via a comparative analysis using material culture-based phylogenies and ecological datasets in relation to demographic/genetic proxies. Only weak evidence for sustained niche construction behaviours by prehistoric hunter-gatherer in southern Scandinavia is found, but this study nonetheless provides interesting insights into the likely processes of dog and reindeer domestication, and into processes of adaptation in Late Glacial foragers.

IMAGE Project: Results of Laboratory Tests on Tracers for Supercritical Conditions.

NASA Astrophysics Data System (ADS)

Brandvoll, Øyvind; Opsahl Viig, Sissel; Nardini, Isabella; Muller, Jiri

2016-04-01

The use of tracers is a well-established technique for monitoring dynamic behaviour of water and gas through a reservoir. In geothermal reservoirs special challenges are encountered due to high temperatures and pressures. In this work, tracer candidates for monitoring water at supercritical conditions (temperature > 374°C, pressure ca 218 bar), are tested in laboratory experiments. Testing of tracers at supercritical water conditions requires experimental set-ups which tolerate harsh conditions with respect to high temperature and pressure. In addition stringent HES (health, environment and safety) factors have to be taken into consideration when designing and performing the experiments. The setup constructed in this project consists of a pressure vessel, high pressure pump, instrumentation for pressure and temperature control and instrumentation required for accurate sampling of tracers. In order to achieve accurate results, a special focus has been paid to the development of the tracer sampling technique. Perfluorinated cyclic hydrocarbons (PFCs) have been selected as tracer candidates. This group of compounds is today commonly used as gas tracers in oil reservoirs. According to the literature they are stable at temperatures up to 400°C. To start with, five PFCs have been tested for thermal stability in static experiments at 375°C and 108 bar in the experimental setup described above. The tracer candidates will be further tested for several months at the relevant conditions. Preliminary results indicate that some of the PFC compounds show stability after three months. However, in order to arrive at conclusive results, the experiments have to be repeated over a longer period and paying special attention to more accurate sampling procedures.

Spool piece aperture: warm to cold temperature position changes

DOE Office of Scientific and Technical Information (OSTI.GOV)

McInturff, A.D.

1982-12-01

In an effort to determine the position of the correction coil system contained in the spool piece in operation, a series of experiments were done in Lab 2 during the cryogenic testing of the spools. A special turn-around box was constructed which had a window through which a sighting could be made of the aperture of the coil packages. A set of four survey monuments were constructed with three point suspension, which were back-lighted by placing a small bulb behind each target which could be turned on individually external to the spool string while under vacuum and at any temperature.more » The targets were located at the ends of each correction coil package in their beam tube.« less

Testing of the masonry arches of the Brooklyn Bridge approaches

NASA Astrophysics Data System (ADS)

Limaye, Hemant S.

1996-11-01

Diagnostic procedures play an important role in performing a condition survey of a structure. Specialized tests are used during a field survey to supplement visual observations. The tests provide valuable information regarding the internal condition of the structure and quality of the construction materials. The tests also help in determining the extent of damage, if any. Recently, a team of consulting engineers performed a study to determine the remaining capacity of the Brooklyn Bridge approaches for the Department of Transportation, City of New York. Using advanced diagnostic procedures such as impact-echo and flatjack testing, additional information was gathered to assist in the study. Impact-echo testing was helpful in identifying the condition of the brick soffits which were covered with pneumatically- applied concrete, and flatjack testing was useful in determining in-situ compressive strength and compression modulus of the brick masonry. The paper describes the work and the testing results.

Improving bridges with prefabricated precast concrete systems.

DOT National Transportation Integrated Search

2013-12-01

In order to minimize the impact of construction on the traveling public, MDOT utilizes innovative and specialized construction methods such as Accelerated Bridge Construction (ABC). Michigan, like other highway agencies in the region, has several cha...

A Qualitative Case Study of Expert Special Educators Effectively Negotiating Their Job Demands

ERIC Educational Resources Information Center

Ortogero, Shawna P.

2013-01-01

This qualitative case study explored how three expert secondary special education teachers in Hawaii constructed their perceived roles and successfully negotiated their job demands. There is a strong connection between role problems and special education teachers leaving the profession. The special education teacher shortage has a direct impact on…

Towards a Framework for Understanding the Process of Educating the "Special" in Special Education

ERIC Educational Resources Information Center

Hausstatter, Rune Sarromaa; Connolley, Steven

2012-01-01

This article addresses the debate between traditionalism and inclusion within special education, and presents the argument that being disabled and having special needs are very real conditions, even though disabilities are socially constructed, and that teachers must respond to this reality. This article first presents a theoretical framework that…

14 CFR 27.619 - Special factors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Special factors. 27.619 Section 27.619... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction General § 27.619 Special factors. (a) The special factors prescribed in §§ 27.621 through 27.625 apply to each part of the structure whose strength...

14 CFR 29.619 - Special factors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Special factors. 29.619 Section 29.619... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction General § 29.619 Special factors. (a) The special factors prescribed in §§ 29.621 through 29.625 apply to each part of the structure whose strength...

Sea-based JSOTFs: Considerations for the Operational Planner

DTIC Science & Technology

2014-05-15

the distinct requirements of the GCE hitting the beach. An equal level of specialization regarding special operations extends to the various...will discuss some of the operational level advantages and challenges of this novel construct and will proffer suggestions regarding how current...This paper will discuss some of the operational level advantages and challenges of this novel construct and will proffer suggestions regarding how

Assessing Social Participation of Pupils with Special Needs in Inclusive Education: The Construction of a Teacher Questionnaire

ERIC Educational Resources Information Center

Koster, Marloes; Nakken, Han; Pijl, Sip Jan; van Houten, Els J.; Lutje Spelberg, Henk C.

2008-01-01

This study addresses the development of a teacher questionnaire to assess the social participation of pupils with special needs in regular primary schools and is divided into 2 parts. In the 1st part, the construction of the questionnaire is described. The questionnaire consists of 30 statements related to 4 key themes of social participation: …

Total Dose Effects in Conventional Bipolar Transistors

NASA Technical Reports Server (NTRS)

Johnston, A. H.; Swift, G. W.; Rax, B. G.

1994-01-01

This paper examines various factors in bipolar device construction and design, and discusses their impact on radiation hardness. The intent of the paper is to improve understanding of the underlying mechanisms for practical devices without special test structures, and to provide (1) guidance in ways to select transistor designs that are more resistant to radiation damage, and (2) methods to estimate the maximum amount of damage that might be expected from a basic transistor design. The latter factor is extremely important in assessing the risk that future lots of devices will be substantially below design limits, which are usually based on test data for older devices.

Human operator tracking performance with a vibrotactile display

NASA Technical Reports Server (NTRS)

Inbar, Gideon F.

1991-01-01

Vibrotactile displays have been designed and used as a sensory aid for the blind. In the present work the same 6 x 24 'Optacon' type vibrotactile display (VTD) was used to characterize human operator (HO) tracking performance in pursuit and compensatory tasks. The VTD was connected via a microprocessor to a one-dimensional joy stick manipulator. Various display schemes were tested on the VDT, and were also compared to visual tracking performance using a specially constructed photo diode matrix display comparable to the VTD.

Development of a construction engineering manpower system for Georgia DOT.

DOT National Transportation Integrated Search

1994-07-01

The objective of this special research study was to develop a construction engineering manpower management system based primarily on construction dollars and to determine if this type of system will be adequate for the GDOT.

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 5: Special emphasis studies

NASA Technical Reports Server (NTRS)

Hanley, G.

1979-01-01

Specific areas were analyzed and identified as high priority for more in-depth analysis. These areas were: (1) rectenna constructability; (2) satellite constructability; (3) support systems constructability; (4) space environmental analysis, and (5) special end-to-end analyses. Baseline requirements specified coplanar solar blankets and an end mounted antenna, utilizing either GaAlAs solar cells and employing a CR of 2, or Si cells. Several configurations were analyzed. Utilizing the preferred configuration as a baseline, a satellite construction base was defined, precursor operations incident to establishment of orbital support facilities identified, and the satellite construction sequence and procedures developed. Since the baseline specifies sixty instead of one hundred and twenty satellites to be constructed in a thirty year period, mass flow to orbit requirements were revised and new traffic models established. Launch site requirements (exclusive of actual launch operations) in terms of manpower and building space were defined.

Research and implementation of a new 6-DOF light-weight robot

NASA Astrophysics Data System (ADS)

Tao, Zihang; Zhang, Tao; Qi, Mingzhong; Ji, Junhui

2017-06-01

Traditional industrial robots have some weaknesses such as low payload-weight, high power consumption and high cost. These drawbacks limit their applications in such areas, special application, service and surgical robots. To improve these shortcomings, a new kind 6-DOF light-weight robot was designed based on modular joints and modular construction. This paper discusses the general requirements of the light-weight robots. Based on these requirements the novel robot is designed. The new robot is described from two aspects, mechanical design and control system. A prototype robot had developed and a joint performance test platform had designed. Position and velocity tests had conducted to evaluate the performance of the prototype robot. Test results showed that the prototype worked well.

The aerodynamics of running socks: Reality or rhetoric?

PubMed

Ashford, Robert L; White, Peter; Indramohan, Vivek

2011-12-01

The primary objective of this study was to test the aerodynamic properties of a selection of running and general sports socks. Eleven pairs of socks were tested in a specially constructed rig which was inserted into a fully calibrated wind tunnel. Wind test speeds included 3, 4, 5, 6, 12 and 45m/s. There was no significant difference between any of the socks tested for their aerodynamic properties. The drag coefficients calculated for each sock varied proportionally with the Reynolds number. No particular sock was more aerodynamic than any of the socks tested. There is no evidence that a sock that is "aerodynamically designed" will help an athlete go faster. This may be more product rhetoric than reality, and further work is justified if such claims are being made. Copyright © 2011 Elsevier Ltd. All rights reserved.

27 CFR 53.97 - Constructive sale price; affiliated corporations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Constructive sale price... AND AMMUNITION Special Provisions Applicable to Manufacturers Taxes § 53.97 Constructive sale price... determining a constructive sale price under section 4216(b)(1)(C) of the Code for sales between corporations...

Very special conformal field theories and their holographic duals

NASA Astrophysics Data System (ADS)

Nakayama, Yu

2018-03-01

Cohen and Glashow introduced the notion of very special relativity as viable space-time symmetry of elementary particle physics. As a natural generalization of their idea, we study the subgroup of the conformal group, dubbed very special conformal symmetry, which is an extension of the very special relativity. We classify all of them and construct field theory examples as well as holographic realization of the very special conformal field theories.

Fabrication and Testing of a Modular Micro-Pocket Fission Detector Instrumentation System for Test Nuclear Reactors

NASA Astrophysics Data System (ADS)

Reichenberger, Michael A.; Nichols, Daniel M.; Stevenson, Sarah R.; Swope, Tanner M.; Hilger, Caden W.; Roberts, Jeremy A.; Unruh, Troy C.; McGregor, Douglas S.

2018-01-01

Advancements in nuclear reactor core modeling and computational capability have encouraged further development of in-core neutron sensors. Measurement of the neutron-flux distribution within the reactor core provides a more complete understanding of the operating conditions in the reactor than typical ex-core sensors. Micro-Pocket Fission Detectors have been developed and tested previously but have been limited to single-node operation and have utilized highly specialized designs. The development of a widely deployable, multi-node Micro-Pocket Fission Detector assembly will enhance nuclear research capabilities. A modular, four-node Micro-Pocket Fission Detector array was designed, fabricated, and tested at Kansas State University. The array was constructed from materials that do not significantly perturb the neutron flux in the reactor core. All four sensor nodes were equally spaced axially in the array to span the fuel-region of the reactor core. The array was filled with neon gas, serving as an ionization medium in the small cavities of the Micro-Pocket Fission Detectors. The modular design of the instrument facilitates the testing and deployment of numerous sensor arrays. The unified design drastically improved device ruggedness and simplified construction from previous designs. Five 8-mm penetrations in the upper grid plate of the Kansas State University TRIGA Mk. II research nuclear reactor were utilized to deploy the array between fuel elements in the core. The Micro-Pocket Fission Detector array was coupled to an electronic support system which has been specially developed to support pulse-mode operation. The Micro-Pocket Fission Detector array composed of four sensors was used to monitor local neutron flux at a constant reactor power of 100 kWth at different axial locations simultaneously. The array was positioned at five different radial locations within the core to emulate the deployment of multiple arrays and develop a 2-dimensional measurement of neutron flux in the reactor core.

A 3D imaging system for the non-intrusive in-flight measurement of the deformation of an aircraft propeller and a helicopter rotor

NASA Astrophysics Data System (ADS)

Stasicki, Bolesław; Boden, Fritz; Ludwikowski, Krzysztof

2017-02-01

The non-intrusive in-flight deformation measurement and the resulting local pitch of an aircraft propeller or helicopter rotor blade is a demanding task. The idea of an imaging system integrated and rotating with the air-craft propeller has already been presented at the 30th International Congress on High-Speed Imaging and Photonics (ICHSIP30) in 2012. Since then this system has been designed, constructed and tested in the laboratory as well as in-flight on the Cobra VUT100 of Evektor Aerotechnik, Kunovice (CZ). The major aim of the EU FP7 project AIM2 ("Advanced In-flight Measurement techniques 2" - contract No. 266107) was to ascertain the feasibility of this technique under extreme conditions - vibration and large centrifugal forces - to real flight testing. Based on the gained experience a new rotating system for the application on helicopter rotors has recently been constructed and tested on the whirl tower of Airbus Helicopters, Donauwoerth (D). In this paper the principle of the applied Image Pattern Correlation Technique (IPCT), a specialized type of Digital Image Correlation (DIC), is outlined and the construction of both rotating 3D image acquisition systems dedicated to the in-flight deformation measurement of the aircraft propeller and helicopter rotor are described. Furthermore, the results of the ground and in-flight tests of these systems will be shown and discussed. The obtained results will be helpful for manufacturers in the design of their future aircrafts.

Teaching Square Roots: Conceptual Complexity in Mathematics Language

ERIC Educational Resources Information Center

Gough, John

2007-01-01

Mathematics is an "artificial" deliberately constructed language, supported crucially by: (1) special alpha-numeric characters and usages; (2) extra-special non-alphanumeric symbols; (3) special written formats within a single line, such as superscripts and subscripts; (4) grouping along a line, including bracketing using round brackets,…

47 CFR 101.131 - Transmitter construction and installation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Transmitter construction and installation. 101.131 Section 101.131 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.131 Transmitter construction and...

47 CFR 101.131 - Transmitter construction and installation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Transmitter construction and installation. 101.131 Section 101.131 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.131 Transmitter construction and...

47 CFR 101.131 - Transmitter construction and installation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Transmitter construction and installation. 101.131 Section 101.131 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.131 Transmitter construction and...

47 CFR 101.131 - Transmitter construction and installation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Transmitter construction and installation. 101.131 Section 101.131 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.131 Transmitter construction and...

Earthquake Potential Models for China

NASA Astrophysics Data System (ADS)

Rong, Y.; Jackson, D. D.

2002-12-01

We present three earthquake potential estimates for magnitude 5.4 and larger earthquakes for China. The potential is expressed as the rate density (probability per unit area, magnitude and time). The three methods employ smoothed seismicity-, geologic slip rate-, and geodetic strain rate data. We tested all three estimates, and the published Global Seismic Hazard Assessment Project (GSHAP) model, against earthquake data. We constructed a special earthquake catalog which combines previous catalogs covering different times. We used the special catalog to construct our smoothed seismicity model and to evaluate all models retrospectively. All our models employ a modified Gutenberg-Richter magnitude distribution with three parameters: a multiplicative ``a-value," the slope or ``b-value," and a ``corner magnitude" marking a strong decrease of earthquake rate with magnitude. We assumed the b-value to be constant for the whole study area and estimated the other parameters from regional or local geophysical data. The smoothed seismicity method assumes that the rate density is proportional to the magnitude of past earthquakes and approximately as the reciprocal of the epicentral distance out to a few hundred kilometers. We derived the upper magnitude limit from the special catalog and estimated local a-values from smoothed seismicity. Earthquakes since January 1, 2000 are quite compatible with the model. For the geologic forecast we adopted the seismic source zones (based on geological, geodetic and seismicity data) of the GSHAP model. For each zone, we estimated a corner magnitude by applying the Wells and Coppersmith [1994] relationship to the longest fault in the zone, and we determined the a-value from fault slip rates and an assumed locking depth. The geological model fits the earthquake data better than the GSHAP model. We also applied the Wells and Coppersmith relationship to individual faults, but the results conflicted with the earthquake record. For our geodetic model we derived the uniform upper magnitude limit from the special catalog and assumed local a-values proportional to maximum horizontal strain rate. In prospective tests the geodetic model agrees well with earthquake occurrence. The smoothed seismicity model performs best of the four models.

The role of the special educator and rehabilitator with a child with a rare disease.

PubMed

Petkovska, Ana

2014-01-01

In the case of a child with a rare disease the role of the special educator and rehabilitator is important if in addition to the primary disease the child is affected by motor, sensory, mental or emotional deficiency. The special educator and rehabilitator participates in the discovery on their first visit to the health institution. For each child the special educator and rehabilitator prepares a file with all the relevant data, takes anamnestic data, or complements it, to get a complete picture of the problem, and inputs data from the observation. S/he collaborates with members of the professional team. S/he provides advice, assists and works with the parents. S/he assesses the psycho-motor abilities of the person and how the person functions in the environment. The special educator and rehabilitator performs the following assessments: assessment of dominant lateralization; assessment of psycho-motor abilities of the upper extremities; assessment of psycho-motor abilities of the lower extremities; differentiation of the motor abilities of the fingers; assessment of the possibilities for maintaining the equilibrium of the body; assessment of coordination of the upper and lower extremities in rhythm. The special educator and rehabilitator assesses and examines the praxical organization, specifically melokinetic, ideomotory, ideatory and constructive praxis. This includes assessment of the graphomotoric as a practical activity through testing for quality of lineation, graphomotoric array through analysis of the maturity of the manuscript and the disgraphy of the manuscript. Gnostic organization is examined through assessment of knowledge of body parts, assessment of knowledge of lateralization on themselves and others, assessment of experience and orientation in space and time. Practognostic organization is examined with tests for imitation of movements. Evaluation of the organization of speech through the test of articulation on voices, semantic test and evaluation of lexical abilities and dyslexic reading. Assessment of the organization of cognitive functions where thought operation is expressed, and the special educator investigates the level of comprehension of: serialization, classification, correspondence and conservation. At the end, the child's behaviour is examined. Based on the data obtained, a plan and a strategy for further treatment is developed. After a certain period of time the child is re-examined (evaluation) and we check whether are there any advances in education and rehabilitation. The special educator and rehabilitator is in constant contact with the parents for certain problems that the children have with social adaptation, and they build strategies for future activities.

NACA Photographer Films a Ramjet Test

NASA Image and Video Library

1946-10-21

A National Advisory Committee for Aeronautics (NACA) photographer films the test of a ramjet engine at the Lewis Flight Propulsion Laboratory. The laboratory had an arsenal of facilities to test the engines and their components, and immersed itself in the study of turbojet and ramjet engines during the mid-1940s. Combustion, fuel injection, flameouts, and performance at high altitudes were of particular interest to researchers. They devised elaborate schemes to instrument the engines in order to record temperature, pressure, and other data. Many of the tests were also filmed so Lewis researchers could visually review the combustion performance along with the data. The photographer in this image was using high-speed film to document a thrust augmentation study at Lewis’ Jet Static Propulsion Laboratory. The ramjet in this photograph was equipped with a special afterburner as part of a general effort to improve engine performance. Lewis’ Photo Lab was established in 1942. The staff was expanded over the next few years as more test facilities became operational. The Photo Lab’s staff and specialized equipment have been key research tools for decades. They accompany pilots on test flights, use high-speed cameras to capture fleeting processes like combustion, and work with technology, such as the Schlieren camera, to capture supersonic aerodynamics. In addition, the group has documented construction projects, performed publicity work, created images for reports, and photographed data recording equipment.

Living Together in Space: The International Space Station Internal Active Thermal Control System Issues and Solutions-Sustaining Engineering Activities at the Marshall Space Flight Center From 1998 to 2005

NASA Technical Reports Server (NTRS)

Wieland, P. O.; Roman, M. C.; Miller, L.

2007-01-01

On board the International Space Station, heat generated by the crew and equipment is removed by the internal active thermal control system to maintain a comfortable working environment and prevent equipment overheating. Test facilities simulating the internal active thermal control system (IATCS) were constructed at the Marshall Space Flight Center as part of the sustaining engineering activities to address concerns related to operational issues, equipment capability, and reliability. A full-scale functional simulator of the Destiny lab module IATCS was constructed and activated prior to launch of Destiny in 2001. This facility simulates the flow and thermal characteristics of the flight system and has a similar control interface. A subscale simulator was built, and activated in 2000, with special attention to materials and proportions of wetted surfaces to address issues related to changes in fluid chemistry, material corrosion, and microbial activity. The flight issues that have arisen and the tests performed using the simulator facilities are discussed in detail. In addition, other test facilities at the MSFC have been used to perform specific tests related to IATCS issues. Future testing is discussed as well as potential modifications to the simulators to enhance their utility.

How Is Self-Determination Conceptualized in Special Education Literature? A Content Analysis of Model Demonstration Projects and Special Education Literature

ERIC Educational Resources Information Center

Rosser, Mariola Srednicka

2010-01-01

This study investigates the concept of self-determination in special education. The self-determination construct in special education is often described in terms of abilities and attitudes needed to achieve one's goals (Field & Hoffman, 1994a; Ward, 1988; Powers et al., 1996). Despite many similarities among definitions and models of…

27 CFR 53.95 - Constructive sale price; basic rules.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Constructive sale price... AMMUNITION Special Provisions Applicable to Manufacturers Taxes § 53.95 Constructive sale price; basic rules... to construct a sale price on which to compute a tax imposed under chapter 32 of the Code on the price...

Tire footprint studies

NASA Technical Reports Server (NTRS)

Chawla, Mangal; Medzorian, John

1995-01-01

This presentation covers the results of tire footprint studies conducted in the Landing Gear Development Facility of the USAF Wright Laboratory at the Wright Patterson Air force Base, OH. Tire footprint studies are essential in understanding tire wear mechanisms and computing tire tread wear rates. The power input into the tread is the driving force for tread wear. Variables needed for power input calculations include the footprint pressure and slip velocity distributions. Studies were performed on the effects of power input distributions due to vertical load, camber, yaw, inflation pressure, and tire construction. For the present study, two tire constructions, one radial and the other bias, were selected. These tires were for the F-16 Block 30 fighter aircraft, both of which were previously worn. The present study was limited to steady straight roll with a 14,000 lb vertical load, a 310 psi inflation pressure, and zero yaw and camber. All tests were conducted on the Tire Force Machine (TFM) with a specialized sensor plate with embedded pressure sensors (X, Y, and Z) and slip sensors (X and Y). All tests were conducted for a table speed of 1 in/s. Tests on the TFM show that the power intensity distributions and total power for both tire constructions are quite similar for straight roll. Later on, tests were also conducted on a modified dynamometer which was overlaid with a grit wear surface. The tire speed was maintained at 40 miles per hour and yaw was set to four degrees. Dynamometer tests showed that radial tires have more tread wear than the bias tire; however, in the field, radial tires have longer life.

Special sensors for deformation measurements of different construction materials and structures

NASA Astrophysics Data System (ADS)

Glisic, Branko; Inaudi, Daniele; Kronenberg, Pascal; LLoret, Sandra; Vurpillot, Samuel

1999-05-01

SOFO is a fiber optic sensor system that allows the monitoring of micrometer deformations over measurement bases up to a few meters. It is particularly adapted to measure civil structures built with conventional civil engineering materials (concrete, steel and timber). It has been successfully tested in different types of structures such as bridges, tunnels and piles. The application of the system is however limited in some case when unusual materials are used in the construction and in other cases by the dimensions of standard SOFO sensors. To extend the domain of application of the current system, special sensors have been developed. In this paper we present four special SOFO sensors: long, membrane, thin and stiff sensors. The long sensor has a measurement basis of several tenths of meters and its purpose is the measurement of deformations in massive and large structures (dames, tunnels). The membrane sensor is for use on laminated materials (e.g. membrane roofing) and it is easy to install by simply gluing it to the structure to be monitored. Since standard sensors can not be used for thin mortar layers because of their cross- section, a thin sensor has been developed, too. Finally, the aim of the stiff sensor is to determine the hardening (solidification) time of concrete. This time is determined by comparing the deformations of a stiff and a standard sensor, closely placed in the concrete at the very early age. The design of these sensors is presented along with significant application examples.

Increasing the efficiency of solar thermal panels

NASA Astrophysics Data System (ADS)

Dobrnjac, M.; Latinović, T.; Dobrnjac, S.; Živković, P.

2016-08-01

The popularity of solar heating systems is increasing for several reasons. These systems are reliable, adaptable and pollution-free, because the renewable solar energy is used. There are many variants of solar systems in the market mainly constructed with copper pipes and absorbers with different quality of absorption surface. Taking into account the advantages and disadvantages of existing solutions, in order to increase efficiency and improve the design of solar panel, the innovative solution has been done. This new solar panel presents connection of an attractive design and the use of constructive appropriate materials with special geometric shapes. Hydraulic and thermotechnical tests that have been performed on this panel showed high hydraulic and structural stability. Further development of the solar panel will be done in the future in order to improve some noticed disadvantages.

Construction of optimal 3-node plate bending triangles by templates

NASA Astrophysics Data System (ADS)

Felippa, C. A.; Militello, C.

A finite element template is a parametrized algebraic form that reduces to specific finite elements by setting numerical values to the free parameters. The present study concerns Kirchhoff Plate-Bending Triangles (KPT) with 3 nodes and 9 degrees of freedom. A 37-parameter template is constructed using the Assumed Natural Deviatoric Strain (ANDES). Specialization of this template includes well known elements such as DKT and HCT. The question addressed here is: can these parameters be selected to produce high performance elements? The study is carried out by staged application of constraints on the free parameters. The first stage produces element families satisfying invariance and aspect ratio insensitivity conditions. Application of energy balance constraints produces specific elements. The performance of such elements in benchmark tests is presently under study.

Design and construction of a prototype ACTS propagation terminal

NASA Technical Reports Server (NTRS)

Stutzman, Warren; Pratt, Tim; Nunnally, Charles; Nealy, Randall; Remaklus, Will; Sylvester, Bill; Predoehl, Andrew; Gaff, Doug

1993-01-01

The launch schedule for the Advanced Communication Technology Satellite (ACTS) spacecraft did not leave sufficient time for completion of the prototype ACTS Propagation Terminals (APT) prior to initiation of the APT production phase. In fact, the approach used was to construct and test all subassemblies of the terminal with special emphasis on the technically challenging portions. These include the RF front end that uses a state-of-the-art down converter which integrates a low noise amplifier, mixer, post amplifier, filter, and local oscillator port frequency doubler into a single small package. In addition, a new digital receiver that uses the latest DSP technology was developed. Both of these subassemblies were thoroughly tested. The highest risk technology in the APT program was the digital receiver. Several candidate algorithms and DSP chips were investigated early on, primarily under JPL sponsorship. A receiver was constructed based on Texas Instruments chip. The final prototype digital receiver was one based on an Analog Devices chip. The design and test results are documented in a report prepared for this grant. A Primary Design Review (PDR) was conducted 30 May 1991, and a Critical Design Review was held 7 Jul. 1992. Final complete documentation of the APT's will appear in the form of three reports: a hardware description report, a report on the data collection code (ACTS VIEW), and a report on the preprocessing code.

36 CFR 294.23 - Road construction and reconstruction in Idaho Roadless Areas.

Code of Federal Regulations, 2013 CFR

2013-07-01

... reconstruction in Idaho Roadless Areas. (a) Wild Land Recreation, Special Areas of Historic or Tribal... designated as Wild Land Recreation, Special Areas of Historic or Tribal Significance, or Primitive. However... Wild Land Recreation, Special Area of Historic or Tribal Significance, or Primitive if pursuant to...

36 CFR 294.23 - Road construction and reconstruction in Idaho Roadless Areas.

Code of Federal Regulations, 2014 CFR

2014-07-01

... reconstruction in Idaho Roadless Areas. (a) Wild Land Recreation, Special Areas of Historic or Tribal... designated as Wild Land Recreation, Special Areas of Historic or Tribal Significance, or Primitive. However... Wild Land Recreation, Special Area of Historic or Tribal Significance, or Primitive if pursuant to...

36 CFR 294.23 - Road construction and reconstruction in Idaho Roadless Areas.

Code of Federal Regulations, 2012 CFR

2012-07-01

... reconstruction in Idaho Roadless Areas. (a) Wild Land Recreation, Special Areas of Historic or Tribal... designated as Wild Land Recreation, Special Areas of Historic or Tribal Significance, or Primitive. However... Wild Land Recreation, Special Area of Historic or Tribal Significance, or Primitive if pursuant to...

13 CFR 120.397 - Are there any special restrictions?

Code of Federal Regulations, 2014 CFR

2014-01-01

...? 120.397 Section 120.397 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Builders Loan Program § 120.397 Are there any special restrictions? The borrower must not use loan proceeds to purchase vacant land for possible future construction or to operate or...

13 CFR 120.397 - Are there any special restrictions?

Code of Federal Regulations, 2013 CFR

2013-01-01

...? 120.397 Section 120.397 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Builders Loan Program § 120.397 Are there any special restrictions? The borrower must not use loan proceeds to purchase vacant land for possible future construction or to operate or...

13 CFR 120.397 - Are there any special restrictions?

Code of Federal Regulations, 2012 CFR

2012-01-01

...? 120.397 Section 120.397 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Builders Loan Program § 120.397 Are there any special restrictions? The borrower must not use loan proceeds to purchase vacant land for possible future construction or to operate or...

13 CFR 120.397 - Are there any special restrictions?

Code of Federal Regulations, 2011 CFR

2011-01-01

...? 120.397 Section 120.397 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Builders Loan Program § 120.397 Are there any special restrictions? The borrower must not use loan proceeds to purchase vacant land for possible future construction or to operate or...

48 CFR 936.202-70 - Specifications charges.

Code of Federal Regulations, 2011 CFR

2011-10-01

... payments, the invitations for bids should so state, and the architect-engineer or construction management... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 936.202-70 Specifications charges. (a) To support all invitations for bids, plans and...

48 CFR 936.202-70 - Specifications charges.

Code of Federal Regulations, 2012 CFR

2012-10-01

... payments, the invitations for bids should so state, and the architect-engineer or construction management... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 936.202-70 Specifications charges. (a) To support all invitations for bids, plans and...

48 CFR 936.202-70 - Specifications charges.

Code of Federal Regulations, 2013 CFR

2013-10-01

... payments, the invitations for bids should so state, and the architect-engineer or construction management... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 936.202-70 Specifications charges. (a) To support all invitations for bids, plans and...

48 CFR 936.202-70 - Specifications charges.

Code of Federal Regulations, 2014 CFR

2014-10-01

... payments, the invitations for bids should so state, and the architect-engineer or construction management... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 936.202-70 Specifications charges. (a) To support all invitations for bids, plans and...

47 CFR 90.757 - Construction requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Construction requirements. 90.757 Section 90.757 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES... MHz Band § 90.757 Construction requirements. (a) Except as provided in paragraph (b) of this section...

47 CFR 90.757 - Construction requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Construction requirements. 90.757 Section 90.757 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES... MHz Band § 90.757 Construction requirements. (a) Except as provided in paragraph (b) of this section...

48 CFR 936.202-70 - Specifications charges.

Code of Federal Regulations, 2010 CFR

2010-10-01

... payments, the invitations for bids should so state, and the architect-engineer or construction management... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Construction 936.202-70 Specifications charges. (a) To support all invitations for bids, plans and...

49 CFR 571.224 - Standard No. 224; Rear impact protection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... trailers, pulpwood trailers, road construction controlled horizontal discharge trailers, special purpose... latches are excluded from the determination of the rearmost point. Road construction controlled horizontal... machine or paving equipment for road construction and paving operations. Rounded corner means a guard's...

A Semantics-Based Approach to Construction Cost Estimating

ERIC Educational Resources Information Center

Niknam, Mehrdad

2015-01-01

A construction project requires collaboration of different organizations such as owner, designer, contractor, and resource suppliers. These organizations need to exchange information to improve their teamwork. Understanding the information created in other organizations requires specialized human resources. Construction cost estimating is one of…

Communication in the Special Needs Class

ERIC Educational Resources Information Center

Freeman, David

1975-01-01

This article stressed the importance of constant constructive communication between parents, teachers and students as a means towards building a relationship of trust, understanding and fulfillment in the special class. (Editor/RK)

Construction of the GAMCIT gamma-ray burst detector (G-056)

NASA Technical Reports Server (NTRS)

Coward, Michael H.; Grunsfeld, John M.; Mccall, Benjamin J.; Ratner, Albert

1995-01-01

The GAMCIT (Gamma-ray Astrophysics Mission, California Institute of Technology) payload is a Get-Away-Special payload designed to search for high-energy gamma-ray bursts and any associated optical transients. This paper presents details on the development and construction of the GAMCIT payload. In addition, this paper will reflect upon the unique challenges involved in bringing the payload close to completion, as the project has been designed, constructed, and managed entirely by undergraduate members of the Caltech SEDS (Students for the Exploration and Development of Space). Our experience will definitely be valuable to other student groups interested in undertaking a challenge such as a Get-Away-Special payload.

Detection of inter-turn faults in transformer winding using the capacitor discharge method

NASA Astrophysics Data System (ADS)

Michna, Michał; Wilk, Andrzej; Ziółko, Michał; Wołoszyk, Marek; Swędrowski, Leon; Szwangruber, Piotr

2017-12-01

The paper presents results of an analysis of inter-turn fault effects on the voltage and current waveforms of a capacitor discharge through transformer windings. The research was conducted in the frame of the Facility of Antiproton and Ion Research project which goal is to build a new international accelerator facility that utilizes superconducting magnets. For the sake of electrical quality assurance of the superconducting magnet circuits, a measurement and diagnostic system is currently under development at Gdansk University of Technology (GUT). Appropriate measurements and simulations of the special transformer system were performed to verify the proposed diagnostic method. In order to take into account the nonlinearity and hysteresis of the magnetic yoke, a novel mathematical model of the transformer was developed. A special test bench was constructed to emulate the inter-turn faults within transformer windings.

Aeronautical engineering, a special bibliography, September 1971 (supplement 10)

NASA Technical Reports Server (NTRS)

1971-01-01

This supplement to Aeronautical Engineering-A Special Bibliography (NASA SP-7037) lists 413 reports, journal articles, and other documents originally announced in September 1971 in Scientific and Technical Aerospace Reports (STAR) or in International Aerospace Abstracts (IAA). The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the bibliography consists of a standard bibliographic citation accompanied by an abstract. The listing of the entries is arranged in two major sections, IAA Entries and STAR Entries in that order. The citations and abstracts are reproduced exactly as they appeared originally in IAA or STAR, including the original accession numbers from the respective announcement journals.

Problems affecting the fidelity of pressure measuring instruments for planetary probes

NASA Technical Reports Server (NTRS)

Hudson, J. B.

1972-01-01

Determination is made of the nature and magnitude of surface-related effects that cause errors in pressure measuring instruments, with special reference being made to instruments intended for use in planetary probes. The interaction of gases with clean surfaces of metals likely to be used as gage construction materials was studied. Special emphasis was placed on the adsorption, chemical reaction, and electron-induced desorption processes. The results indicated that all metals tested were subject to surface processes which would degrade gage fidelity. It was also found, however, that the formation of inert adsorbed layers on these metal surfaces, such as carbon on platinum, greatly reduced or eliminated these effects. This process, combined with a system design which avoids contact between reactive gases and hot filaments, appears to offer the most promising solution to the gage fidelity problem.

Concrete Masonry Designs: Educational Issue.

ERIC Educational Resources Information Center

Hertzberg, Randi, Ed.

2001-01-01

This special journal issue addresses concrete masonry in educational facilities construction. The issue's feature articles are: (1) "It Takes a Village To Construct a Massachusetts Middle School," describing a middle school constructed almost entirely of concrete masonry and modeled after a typical small New England village; (2)…

26 CFR 1.23-3 - Special rules.

Code of Federal Regulations, 2011 CFR

2011-04-01

... conform to the plans or specifications of the completed building. For this purpose, construction includes... construction or reconstruction of a dwelling. In the case of renewable energy source expenditures in connection with the construction or reconstruction of a dwelling that becomes the taxpayer's new principal...

Experimental and simulation flow rate analysis of the 3/2 directional pneumatic valve

NASA Astrophysics Data System (ADS)

Blasiak, Slawomir; Takosoglu, Jakub E.; Laski, Pawel A.; Pietrala, Dawid S.; Zwierzchowski, Jaroslaw; Bracha, Gabriel; Nowakowski, Lukasz; Blasiak, Malgorzata

The work includes a study on the comparative analysis of two test methods. The first method - numerical method, consists in determining the flow characteristics with the use of ANSYS CFX. A modeled poppet directional valve 3/2 3D CAD software - SolidWorks was used for this purpose. Based on the solid model that was developed, simulation studies of the air flow through the way valve in the software for computational fluid dynamics Ansys CFX were conducted. The second method - experimental, entailed conducting tests on a specially constructed test stand. The comparison of the test results obtained on the basis of both methods made it possible to determine the cross-correlation. High compatibility of the results confirms the usefulness of the numerical procedures. Thus, they might serve to determine the flow characteristics of directional valves as an alternative to a costly and time-consuming test stand.

The impact of specially designed digital games-based learning in undergraduate pathology and medical education.

PubMed

Kanthan, Rani; Senger, Jenna-Lynn

2011-01-01

The rapid advances of computer technologies have created a new e-learner generation of "Homo-zappien" students that think and learn differently. Digital gaming is an effective, fun, active, and encouraging way of learning, providing immediate feedback and measurable process. Within the context of ongoing reforms in medical education, specially designed digital games, a form of active learning, are effective, complementary e-teaching/learning resources. To examine the effectiveness of the use of specially designed digital games for student satisfaction and for measurable academic improvement. One hundred fourteen students registered in first-year pathology Medicine 102 had 8 of 16 lecture sessions reviewed in specially designed content-relevant digital games. Performance scores to relevant content sessions were analyzed at midterm and final examinations. Seventy-one students who registered in second-year pathology Medicine 202 were exposed to the games only during the final examination, with the midterm examination serving as an internal matched-control group. Outcome measures included performance at midterm and final examinations. Paired 2-tailed t test statistics compared means. A satisfaction survey questionnaire of yes or no responses analyzed student engagement and their perceptions to digital game-based learning. Questions relevant to the game-play sessions had the highest success rate in both examinations among 114 first-year students. In the 71 second-year students, the examination scores at the end of the final examination were significantly higher than the scores on the midterm examination. Positive satisfaction survey noted increased student engagement, enhanced personal learning, and reduced student stress. Specially constructed digital games-based learning in undergraduate pathology courses showed improved academic performance as measured by examination test scores with increased student satisfaction and engagement.

Roles of airships in economic development

NASA Technical Reports Server (NTRS)

Beier, G. J.; Hidalgo, G. C.

1975-01-01

It is proposed that airships of known and tested technology could, in some cases, perform routine transport missions more economically than conventional transport modes. If infrastructure for direct surface transport is already in place or if such infrastructure can be justified by the size of the market and there are no unusual impediments to constructing it, then the airships of tested technology cannot normally compete. If, however, the surface routes would be unusually expensive or circuitous, or if they involve several transhipments, or if the market size is too small to spread infrastructure costs of conventional transport, the airships of tested technology present a workable alternative. A series of special cases are considered. The cases, though unusual, are not unique; there are several similar possible applications which, in total, would provide a reasonably large market for airships.

Comparison of central axis and jet ring coolant supply for turbine disk cooling on a SSME-HPOTP model

NASA Technical Reports Server (NTRS)

Kim, Y. W.; Metzger, D. E.

1992-01-01

The test facility, test methods and results are presented for an experimental study modeling the cooling of turbine disks in the blade attachment regions with multiple impinging jets, in a configuration simulating the disk cooling method employed on the Space Shuttle Main Engine oxygen turbopump. The study's objective was to provide a comparison of detailed local convection heat transfer rates obtained for a single center-supply of disk coolant with those obtained with the present flight configuration where disk coolant is supplied through an array of 19 jets located near the disk outer radius. Specially constructed disk models were used in a program designed to evaluate possible benefits and identify any possible detrimental effects involved in employing an alternate disk cooling scheme. The study involved the design, construction and testing of two full scale rotating model disks, one plane and smooth for baseline testing and the second contoured to the present flight configuration, together with the corresponding plane and contoured stator disks. Local heat transfer rates are determined from the color display of encapsulated liquid crystals coated on the disk in conjunction with use of a computer vision system. The test program was composed of a wide variety of disk speeds, flowrates, and geometrical configurations, including testing for the effects of disk boltheads and gas ingestion from the gas path region radially outboard of the disk-cavity.

Force Measurements in Magnetic Suspension and Balance System

NASA Technical Reports Server (NTRS)

Kuzin, Alexander; Shapovalov, George; Prohorov, Nikolay

1996-01-01

The description of an infrared telemetry system for measurement of drag forces in Magnetic Suspension and Balance Systems (MSBS) is presented. This system includes a drag force sensor, electronic pack and transmitter placed in the model which is of special construction, and receiver with a microprocessor-based measuring device, placed outside of the test section. Piezosensitive resonators as sensitive elements and non-magnetic steel as the material for the force sensor are used. The main features of the proposed system for load measurements are discussed and the main characteristics are presented.

[Design on tester of pull-out force for orthodontic micro implant].

PubMed

Su, He; Wu, Pei; Wang, Huiyuan; Chen, Yan; Bao, Xuemei

2013-09-01

A special device for measuring the pull-out force of orthodontic micro implant was designed, which has the characteristics of simple construction and easy operation, and can be used to detect the pull-out-force of orthodontic micro implant. The tested data was stored and analyzed by a computer, and as the results, the pull-out-force curve, maximum pull-out force as well as average pull-out force were outputted, which was applied in analyzing or investigating the initial stability and immediate loading property of orthodontic micro implant.

Development of an X-band 25 watt traveling-wave tube

NASA Technical Reports Server (NTRS)

Roberts, L. A.; Knight, R. I.

1972-01-01

The development of a 25 watt high efficiency travelingwave tube at 8.5 GHz for space communications and telemetry applications is reported. Described is the design basis for the tube, which is known as the WJ-3703. Because of the combined high efficiency and high frequency requirements, the helix and body dimensions are very small and require special techniques for various assembly and construction procedures. These are described in detail. Measurement results of focusing tests and RF operation are given, but only pulsed RF performance of the tubes was obtained.

Design and evaluation of an electrohydraulic servoactuator using active standby redundancy

NASA Technical Reports Server (NTRS)

Anderson, R. L.; Cover, W. E.

1972-01-01

The application is described of active standby redundancy techniques to a large electrohydraulic servoactuator. The advantages and limitations of active standby redundancy are identified. Special areas of investigation during the development test phase of the program were the evaluation of output transients as a function of channel switching and the nuisance switching characteristics of the system. The feasibility of constructing large electrohydraulic servoactuators using active standby redundancy was successfully demonstrated. In particular the stability and predictability of a properly designed hydromechanical failure detector was demonstrated.

Validation of the Bulgarian version of Scales for Outcomes in Parkinson's Disease - Autonomic (SCOPA-AUT-BG).

PubMed

Mantarova, Stefka G; Velcheva, Irena V; Georgieva, Spaska O; Stambolieva, Katerina I

2013-01-01

The last twenty years have witnessed a surge of interest in the autonomic symptoms in Parkinson's disease (PD) and the possibilities to diagnose and treat them. The specialized questionnaire assessing the autonomic symptoms in Parkinson's disease (SCOPA-AUT) has been validated and available in English, Dutch and Spanish. In this study we aim at evaluating the validity, reliability and applicability of the Bulgarian version of SCOPA-AUT (SCOPA-AUT-BG). The study included 55 patients with idiopathic PD (mean age 64.4 +/- 8.9 yrs), and 40 healthy controls (mean age 58.5 +/- 9.4 yrs). Clinical severity and disease stage were assessed by United Parkinson's disease rating scale (UPRDS) and Hoen and Yahr (H&Y). Thirty-two of the PD patients completed SCOPA-AUT-BG again after a 7-day interval. Questionnaire reliability was analyzed by determining the internal consistency, homogeneity, discriminatory and construct validity and test-retest reliability. Analyses showed good internal consistency of the summary evaluation of SCOPA-AUT-BG (coefficient alpha of Cronbach = 0.79), which indicates the high reliability of the questionnaire. The lowest Cronbach's alpha coefficient (0.53) was found for the subscale "cardiovascular functions". A dominant role belongs to the subscales for gastrointestinal and urinary functions (Cronbach's Alpha > 0.7), where a significantly high correlation of PD with the UPDRS scale was observed. We found high test-retest reliability based on the responses associated with dysfunction of the gastrointestinal, urinary, thermoregulatory and pupillary autonomic systems. The correlation of the results of SCOPA-AUT-BG with UPDRS is higher than that with H&Y, and the construct validity is high except for the cardiovascular and pupillomotor functions subscales. The results of this study show that SCOPA-AUT-BG is a valid and reliable specialized questionnaire to evaluate autonomic function in patients with Parkinson's disease. Using it allows for more detailed clinical evaluation of these patients and justifies the need to refer them to specialized examination of autonomic functions.

47 CFR 90.169 - Construction prior to grant of application.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Construction prior to grant of application. 90.169 Section 90.169 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL... Governing Facilities Used to Provide Commercial Mobile Radio Services § 90.169 Construction prior to grant...

48 CFR 852.236-91 - Special notes.

Code of Federal Regulations, 2012 CFR

2012-10-01

... deemed to be a representation by the bidder that: (1) Bidder is a construction contractor who owns, operates, or maintains a place of business, regularly engaged in construction, alteration, or repair of... and installing of necessary equipment; or (2) If newly entering into a construction activity, bidder...

48 CFR 852.236-91 - Special notes.

Code of Federal Regulations, 2011 CFR

2011-10-01

... deemed to be a representation by the bidder that: (1) Bidder is a construction contractor who owns, operates, or maintains a place of business, regularly engaged in construction, alteration, or repair of... and installing of necessary equipment; or (2) If newly entering into a construction activity, bidder...

48 CFR 852.236-91 - Special notes.

Code of Federal Regulations, 2010 CFR

2010-10-01

... deemed to be a representation by the bidder that: (1) Bidder is a construction contractor who owns, operates, or maintains a place of business, regularly engaged in construction, alteration, or repair of... and installing of necessary equipment; or (2) If newly entering into a construction activity, bidder...

48 CFR 852.236-91 - Special notes.

Code of Federal Regulations, 2014 CFR

2014-10-01

... deemed to be a representation by the bidder that: (1) Bidder is a construction contractor who owns, operates, or maintains a place of business, regularly engaged in construction, alteration, or repair of... and installing of necessary equipment; or (2) If newly entering into a construction activity, bidder...

48 CFR 852.236-91 - Special notes.

Code of Federal Regulations, 2013 CFR

2013-10-01

... deemed to be a representation by the bidder that: (1) Bidder is a construction contractor who owns, operates, or maintains a place of business, regularly engaged in construction, alteration, or repair of... and installing of necessary equipment; or (2) If newly entering into a construction activity, bidder...

Optimization of parameters of special asynchronous electric drives

NASA Astrophysics Data System (ADS)

Karandey, V. Yu; Popov, B. K.; Popova, O. B.; Afanasyev, V. L.

2018-03-01

The article considers the solution of the problem of parameters optimization of special asynchronous electric drives. The solution of the problem will allow one to project and create special asynchronous electric drives for various industries. The created types of electric drives will have optimum mass-dimensional and power parameters. It will allow one to realize and fulfill the set characteristics of management of technological processes with optimum level of expenses of electric energy, time of completing the process or other set parameters. The received decision allows one not only to solve a certain optimizing problem, but also to construct dependences between the optimized parameters of special asynchronous electric drives, for example, with the change of power, current in a winding of the stator or rotor, induction in a gap or steel of magnetic conductors and other parameters. On the constructed dependences, it is possible to choose necessary optimum values of parameters of special asynchronous electric drives and their components without carrying out repeated calculations.

Characteristics of individuals with high information potential in government research and development organizations.

NASA Technical Reports Server (NTRS)

Holland, W. E.

1972-01-01

In order to study focal individuals within informal communications networks, a special variable was constructed: information potential (IP) was defined as the information-source value placed on an individual by his colleagues. Four hypotheses involving IP were tested in three R&D organizations using questionnaires and pencil-and-paper tests. Results indicated that the individual with high IP used more and different sources of technical information, was seen to be a credible information source and to have a strong ability to associate seemingly unrelated ideas, and was as approachable as the other members of his organization. Four tentative conclusions may be drawn from this study concerning the person with high IP. He is (1) an identifiable individual in several different kinds of organizations; (2) a distinctive information transceiver (transmitter and receiver); (3) both a producer and a catalyst in his own organization; and (4) an extender and an amplifier of information search. To affect the efficiency of informal information flow, the research manager's best hope for positively influencing informal networks lies in the identification and motivation of the special communicators in his organization.

Multi-imager compatible actuation principles in surgical robotics.

PubMed

Stoianovici, D

2005-01-01

Today's most successful surgical robots are perhaps surgeon-driven systems, such as the daVinci (Intuitive Surgical Inc., USA, www.intuitivesurgical.com). These have already enabled surgery that was unattainable with classic instrumentation; however, at their present level of development, they have limited utility. The drawback of these systems is that they are independent self-contained units, and as such, they do not directly take advantage of patient data. The potential of these new surgical tools lies much further ahead. Integration with medical imaging and information are needed for these devices to achieve their true potential. Surgical robots and especially their subclass of image-guided systems require special design, construction and control compared to industrial types, due to the special requirements of the medical and imaging environments. Imager compatibility raises significant engineering challenges for the development of robotic manipulators with respect to imager access, safety, ergonomics, and above all the non-interference with the functionality of the imager. These apply to all known medical imaging types, but are especially challenging for achieving compatibility with the class of MRI systems. Even though a large majority of robotic components may be redesigned to be constructed of MRI compatible materials, for other components such as the motors used in actuation, prescribing MRI compatible materials alone is not sufficient. The electromagnetic motors most commonly used in robotic actuation, for example, are incompatible by principle. As such, alternate actuation principles using "intervention friendly" energy should be adopted and/or devised for these special surgical and radiological interventions. This paper defines the new concept of Multi-Imager Compatibility of surgical manipulators and describes its requirements. Subsequently, the paper gives several recommendations and proposes new actuation principles for this concept. Several implementations have been constructed and tested, and the results are presented here. This is the first paper addressing these issues. Copyright 2005 Robotic Publications Ltd.

48 CFR 36.214 - Special procedures for price negotiation in construction contracting.

Code of Federal Regulations, 2013 CFR

2013-10-01

... price negotiation in construction contracting. 36.214 Section 36.214 Federal Acquisition Regulations... negotiation in construction contracting. (a) Agencies shall follow the policies and procedures in part 15 when... scope of the work. If negotiations reveal errors in the Government estimate, the estimate shall be...

48 CFR 36.214 - Special procedures for price negotiation in construction contracting.

Code of Federal Regulations, 2011 CFR

2011-10-01

... price negotiation in construction contracting. 36.214 Section 36.214 Federal Acquisition Regulations... negotiation in construction contracting. (a) Agencies shall follow the policies and procedures in part 15 when... scope of the work. If negotiations reveal errors in the Government estimate, the estimate shall be...

48 CFR 36.214 - Special procedures for price negotiation in construction contracting.

Code of Federal Regulations, 2012 CFR

2012-10-01

... price negotiation in construction contracting. 36.214 Section 36.214 Federal Acquisition Regulations... negotiation in construction contracting. (a) Agencies shall follow the policies and procedures in part 15 when... scope of the work. If negotiations reveal errors in the Government estimate, the estimate shall be...

48 CFR 36.214 - Special procedures for price negotiation in construction contracting.

Code of Federal Regulations, 2014 CFR

2014-10-01

... price negotiation in construction contracting. 36.214 Section 36.214 Federal Acquisition Regulations... negotiation in construction contracting. (a) Agencies shall follow the policies and procedures in part 15 when... scope of the work. If negotiations reveal errors in the Government estimate, the estimate shall be...

48 CFR 36.214 - Special procedures for price negotiation in construction contracting.

Code of Federal Regulations, 2010 CFR

2010-10-01

... price negotiation in construction contracting. 36.214 Section 36.214 Federal Acquisition Regulations... negotiation in construction contracting. (a) Agencies shall follow the policies and procedures in part 15 when... scope of the work. If negotiations reveal errors in the Government estimate, the estimate shall be...

Target Article with Commentaries: Developmental Niche Construction

ERIC Educational Resources Information Center

Flynn, Emma G.; Laland, Kevin N.; Kendal, Rachel L.; Kendal, Jeremy R.

2013-01-01

Niche construction is the modification of components of the environment through an organism's activities. Humans modify their environments mainly through ontogenetic and cultural processes, and it is this reliance on learning, plasticity and culture that lends human niche construction a special potency. In this paper we aim to facilitate…

22 CFR 228.17 - Special procurement rules for construction and engineering services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... engineering services. 228.17 Section 228.17 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT RULES FOR... construction and engineering services. Advanced developing countries, as defined in § 228.01, which USAID has... engineering services are not eligible to furnish USAID-financed construction and engineering services unless...

22 CFR 228.17 - Special procurement rules for construction and engineering services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... engineering services. 228.17 Section 228.17 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT RULES FOR... construction and engineering services. Advanced developing countries, as defined in § 228.01, which USAID has... engineering services are not eligible to furnish USAID-financed construction and engineering services unless...

22 CFR 228.17 - Special procurement rules for construction and engineering services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... engineering services. 228.17 Section 228.17 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT RULES FOR... construction and engineering services. Advanced developing countries, as defined in § 228.01, which USAID has... engineering services are not eligible to furnish USAID-financed construction and engineering services unless...

46 CFR 160.035-3 - Construction of steel oar-propelled lifeboats.

Code of Federal Regulations, 2011 CFR

2011-10-01

... after fabrication. Other methods of corrosion prevention will be given special consideration. (2) Where.... (j) Protection against corrosion. (1) All steel or iron entering into the construction of lifeboats... 46 Shipping 6 2011-10-01 2011-10-01 false Construction of steel oar-propelled lifeboats. 160.035-3...

48 CFR 36.215 - Special procedures for cost-reimbursement contracts for construction.

Code of Federal Regulations, 2010 CFR

2010-10-01

... cost-reimbursement contracts for construction. 36.215 Section 36.215 Federal Acquisition Regulations...-reimbursement contracts for construction. Contracting officers may use a cost-reimbursement contract to acquire... limitation on cost-reimbursement contracts). [48 FR 42356, Sept. 19, 1983. Redesignated at 62 FR 272, Jan. 2...

48 CFR 45.101 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., special test equipment or special tooling. Government-furnished property means property in the possession... contractor-acquired property. Government property includes material, equipment, special tooling, special test... end-item. Material does not include equipment, special tooling, special test equipment or real...

Multilevel Concatenated Block Modulation Codes for the Frequency Non-selective Rayleigh Fading Channel

NASA Technical Reports Server (NTRS)

Lin, Shu; Rhee, Dojun

1996-01-01

This paper is concerned with construction of multilevel concatenated block modulation codes using a multi-level concatenation scheme for the frequency non-selective Rayleigh fading channel. In the construction of multilevel concatenated modulation code, block modulation codes are used as the inner codes. Various types of codes (block or convolutional, binary or nonbinary) are being considered as the outer codes. In particular, we focus on the special case for which Reed-Solomon (RS) codes are used as the outer codes. For this special case, a systematic algebraic technique for constructing q-level concatenated block modulation codes is proposed. Codes have been constructed for certain specific values of q and compared with the single-level concatenated block modulation codes using the same inner codes. A multilevel closest coset decoding scheme for these codes is proposed.

Pathways: a culturally appropriate obesity-prevention program for American Indian schoolchildren1–3

PubMed Central

Davis, Sally M; Going, Scott B; Helitzer, Deborah L; Teufel, Nicolette I; Snyder, Patricia; Gittelsohn, Joel; Metcalfe, Lauve; Arviso, Vivian; Evans, Marguerite; Smyth, Mary; Brice, Richard; Altaha, Jackie

2016-01-01

Pathways, a culturally appropriate obesity prevention study for third-, fourth-, and fifth-grade American Indian schoolchildren includes an intervention that promotes increased physical activity and healthful eating behaviors. The Pathways intervention, developed through a collaboration of universities and American Indian nations, schools, and families, focuses on individual, behavioral, and environmental factors and merges constructs from social learning theory with American Indian customs and practices. We describe the Pathways program developed during 3 y of feasibility testing in American Indian schools, with special emphasis on the activities developed for the third grade; review the theoretical and cultural underpinnings of the program; outline the construction process of the intervention; detail the curriculum and physical education components of the intervention; and summarize the formative assessment and the school food service and family components of the intervention. PMID:10195605

It Should Not Be a Pit Stop: Voices and Perspectives of Homeless Youth on Labeling and Placement in Special Education

ERIC Educational Resources Information Center

Saldanha, Kennedy

2017-01-01

Although the incomplete school histories of homeless youths are often highlighted, little is written about their school careers involving special education. This study is based on the educational narratives of homeless youths in special education. Their narratives were constructed using "direct scribing" and narrative ethnography. The…

Critical Race Theory, Disability Microaggressions and Latina/o Student Experiences in Special Education

ERIC Educational Resources Information Center

Dávila, Brianne

2015-01-01

This research draws upon critical race theory (CRT) to explore the experiences of Latina/o students in special education. It seeks to extend the theoretical construct of racial microaggressions and illustrate the additional layer of disability as I present data that are particular to the context of special education and the assigned label of…

27 CFR 53.96 - Constructive sale price; special rule for arm's-length sales.

Code of Federal Regulations, 2012 CFR

2012-04-01

...; special rule for arm's-length sales. 53.96 Section 53.96 Alcohol, Tobacco Products and Firearms ALCOHOL... sale price; special rule for arm's-length sales. (a) In general. Section 4216(b)(2) of the Code... distributors in arm's-length transactions, and the manufacturer establishes that its prices in such cases are...

27 CFR 53.96 - Constructive sale price; special rule for arm's-length sales.

Code of Federal Regulations, 2011 CFR

2011-04-01

...; special rule for arm's-length sales. 53.96 Section 53.96 Alcohol, Tobacco Products and Firearms ALCOHOL... sale price; special rule for arm's-length sales. (a) In general. Section 4216(b)(2) of the Code... distributors in arm's-length transactions, and the manufacturer establishes that its prices in such cases are...

27 CFR 53.96 - Constructive sale price; special rule for arm's-length sales.

Code of Federal Regulations, 2013 CFR

2013-04-01

...; special rule for arm's-length sales. 53.96 Section 53.96 Alcohol, Tobacco Products and Firearms ALCOHOL... sale price; special rule for arm's-length sales. (a) In general. Section 4216(b)(2) of the Code... distributors in arm's-length transactions, and the manufacturer establishes that its prices in such cases are...

27 CFR 53.96 - Constructive sale price; special rule for arm's-length sales.

Code of Federal Regulations, 2014 CFR

2014-04-01

...; special rule for arm's-length sales. 53.96 Section 53.96 Alcohol, Tobacco Products and Firearms ALCOHOL... sale price; special rule for arm's-length sales. (a) In general. Section 4216(b)(2) of the Code... distributors in arm's-length transactions, and the manufacturer establishes that its prices in such cases are...

School Transitions: A Qualitative Study of the Supports Provided by Washington State Special Education Administrators

ERIC Educational Resources Information Center

Lewinsohn, Kari

2013-01-01

This study investigated the role of special education administrators in the transition planning process for children with disabilities ages 3-21 in selected Washington school districts. A basic qualitative study was selected to construct meaning from a described phenomenon. The study sought to identify and explain how special education…

Variable-intercept panel model for deformation zoning of a super-high arch dam.

PubMed

Shi, Zhongwen; Gu, Chongshi; Qin, Dong

2016-01-01

This study determines dam deformation similarity indexes based on an analysis of deformation zoning features and panel data clustering theory, with comprehensive consideration to the actual deformation law of super-high arch dams and the spatial-temporal features of dam deformation. Measurement methods of these indexes are studied. Based on the established deformation similarity criteria, the principle used to determine the number of dam deformation zones is constructed through entropy weight method. This study proposes the deformation zoning method for super-high arch dams and the implementation steps, analyzes the effect of special influencing factors of different dam zones on the deformation, introduces dummy variables that represent the special effect of dam deformation, and establishes a variable-intercept panel model for deformation zoning of super-high arch dams. Based on different patterns of the special effect in the variable-intercept panel model, two panel analysis models were established to monitor fixed and random effects of dam deformation. Hausman test method of model selection and model effectiveness assessment method are discussed. Finally, the effectiveness of established models is verified through a case study.

Design, Project Execution, and Commissioning of the 1.8 K Superfluid Helium Refrigeration System for SRF Cryomodule Testing

DOE PAGES

Treite, P.; Nuesslein, U.; Jia, Yi; ...

2015-07-15

The Fermilab Cryomodule Test Facility (CMTF) provides a test bed to measure the performance of superconducting radiofrequency (SRF) cryomodules (CM). These SRF components form the basic building blocks of future high intensity accelerators such as the International Linear Collider (ILC) and a Muon Collider. Linde Kryotechnik AG and Linde Cryogenics have designed, constructed and commissioned the superfluid helium refrigerator needed to support SRF component testing at the CMTF Facility. The hybrid refrigerator is designed to operate in a variety of modes and under a wide range of boundary conditions down to 1.8 Kelvin set by CM design. Special features ofmore » the refrigerator include the use of warm and cold compression and high efficiency turbo expanders.This paper gives an overview on the wide range of the challenging cooling requirements, the design, fabrication and the commissioning of the installed cryogenic system.« less

Construction of a High Temperature Teg Measurement System for the Evaluation of Thermoelectric Oxide Modules

NASA Astrophysics Data System (ADS)

Populoh, S.; Trottmann, M.; Brunko, O. C.; Thiel, P.; Weidenkaff, A.

2013-08-01

A dedicated test stand was developed and built to characterize the efficiency, power output and open circuit voltage of various thermoelectric generators (TEGs) based on tellurides, heusler compounds and thermoelectric oxides. The test stand allows measurements of TEGs of sizes up to 4 cm × 4 cm at hot side temperatures up to 1150 K in different atmospheres. Special care was taken about the heat flux measurement by precise measurement of the temperature distribution within the reference block. In order to demonstrate the functionality of the test stand thermoelectric oxide modules (TOM) were built from n-type perovskite-type manganates and p-type cuprates. The modules were tested regarding their stability, maximum power output and efficiency at temperatures up to 1100 K. The TOMs withstand large temperature gradients and operated in ambient air yielding high power densities.

Design of an assessment to probe teachers' content knowledge for teaching: An example from energy in high school physics

NASA Astrophysics Data System (ADS)

Etkina, Eugenia; Gitomer, Drew; Iaconangelo, Charles; Phelps, Geoffrey; Seeley, Lane; Vokos, Stamatis

2018-06-01

Research into teacher learning and practice over the last three decades shows that the teachers of a specific subject need to possess knowledge that is different from the knowledge of other content experts. Yet this specialized version of content knowledge that teachers need to plan instruction, respond to student ideas, and assess student understanding in real time is a theoretically elusive construct. It is crucial for the fields of precollege teacher preparation, teacher professional education, and postsecondary faculty professional development to (a) clarify the construct that underlies this specialized content knowledge, (b) operationalize it in some domain, (c) measure it in both static contexts and as it is enacted in the classroom, and (d) correlate its presence with "richness" of classroom instruction and its effect on student learning. This paper documents a piece of a multiyear, multi-institutional effort to investigate points (a)-(d) in the domain of energy in the first high school physics course. In particular, we describe the framework that we developed to clarify content knowledge for teaching in the context of high school energy learning. We then outline the process through which we developed, tested, and refined a "paper-and-pencil" assessment administered on a computer and discuss the substantive and psychometric features of several items based on a field test of the final form of the assessment. We choose to discuss these items for a dual purpose: to illustrate the application of our general framework and to present performance findings from a sample of 362 practicing high school teachers of physics.

Lunar and Planetary Bases, Habitats, and Colonies

NASA Technical Reports Server (NTRS)

2004-01-01

This special bibliography includes the design and construction of lunar and Mars bases, habitats, and settlements; construction materials and equipment; life support systems; base operations and logistics; thermal management and power systems; and robotic systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butler, T.; Curtis, O.; Stephenson, R.

As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta-based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA, in the mixed humid climate. This home serves as a residence and home office for the firm's owners, as well as a demonstration of their design approach to potential and current clients. Southface believes the home demonstrates current best practices for the mixed-humid climate, including a building envelope featuring advanced air sealing details and low density spray foam insulation, glazing that exceeds ENERGY STARmore » requirements, and a high performance heating and cooling system. Construction quality and execution was a high priority for TaC Studios and was ensured by a third party review process. Post-construction testing showed that the project met stated goals for envelope performance, an air infiltration rate of 2.15 ACH50. The homeowners wished to further validate whole house energy savings through the project's involvement with Building America and this long-term monitoring effort. As a Building America test home, this home was evaluated to detail whole house energy use, end use loads, and the efficiency and operation of the ground source heat pump and associated systems. Given that the home includes many non-typical end use loads including a home office, pool, landscape water feature, and other luxury features not accounted for in Building America modeling tools, these end uses were separately monitored to determine their impact on overall energy consumption.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butler, T.; Curtis, O.; Stephenson, R.

As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta-based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA in the mixed humid climate. This home serves as a residence and home office for the firm's owners, as well as a demonstration of their design approach topotential and current clients. Southface believes the home demonstrates current best practices for the mixed-humid climate, including a building envelope featuring advanced air sealing details and low density spray foam insulation, glazing that exceeds ENERGY STAR requirements,more » and a high performance heating and cooling system. Construction quality and execution was a high priority for TaCStudios and was ensured by a third party review process. Post-construction testing showed that the project met stated goals for envelope performance, an air infiltration rate of 2.15 ACH50. The homeowners wished to further validate whole house energy savings through the project's involvement with Building America and this long-term monitoring effort. As a Building America test home, this homewas evaluated to detail whole house energy use, end use loads, and the efficiency and operation of the ground source heat pump and associated systems. Given that the home includes many non-typical end use loads including a home office, pool, landscape water feature, and other luxury features not accounted for in Building America modeling tools, these end uses were separately monitored todetermine their impact on overall energy consumption.« less

The PMS project: Poor man's supercomputer

NASA Astrophysics Data System (ADS)

Csikor, F.; Fodor, Z.; Hegedüs, P.; Horváth, V. K.; Katz, S. D.; Piróth, A.

2001-02-01

We briefly describe the Poor Man's Supercomputer (PMS) project carried out at Eötvös University, Budapest. The goal was to construct a cost effective, scalable, fast parallel computer to perform numerical calculations of physical problems that can be implemented on a lattice with nearest neighbour interactions. To this end we developed the PMS architecture using PC components and designed a special, low cost communication hardware and the driver software for Linux OS. Our first implementation of PMS includes 32 nodes (PMS1). The performance of PMS1 was tested by Lattice Gauge Theory simulations. Using pure SU(3) gauge theory or the bosonic part of the minimal supersymmetric extention of the standard model (MSSM) on PMS1 we obtained 3 / Mflops and 0.60 / Mflops price-to-sustained performance ratio for double and single precision operations, respectively. The design of the special hardware and the communication driver are freely available upon request for non-profit organizations.

The seemingly quixotic pursuit of a cumulative psychological science: introduction to the special issue.

PubMed

Curran, Patrick J

2009-06-01

The goal of any empirical science is to pursue the construction of a cumulative base of knowledge upon which the future of the science may be built. However, there is mixed evidence that the science of psychology can accurately be characterized by such a cumulative progression. Indeed, some argue that the development of a truly cumulative psychological science is not possible with the current paradigms of hypothesis testing in single-study designs. The author explores this controversy as a framework to introduce the 6 articles that make up this special issue on the integration of data and empirical findings across multiple studies. The author proposes that the methods and techniques described in this set of articles can significantly propel researchers forward in their ongoing quest to build a cumulative psychological science. (PsycINFO Database Record (c) 2009 APA, all rights reserved).

A custom-tailored FAMOS burn-up meter for VVER 440 fuel assemblies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simon, G.G.; Golochtchapov, S.; Glazov, A.G.

1995-12-31

The FAMOS fuel assembly monitoring system had been originally developed for monitoring irradiated fuel assemblies of the Karlsruhe Nuclear Research Center concentrating on neutron detection systems for special applications.The measurements in the past had demonstrated that FAMOS can perform precise measurements to control or measure with accuracy the main physical parameters of spent fuel. The FAMOS 3 system is specialized for burn-up determination of fuel assemblies. Thus it is possible to take into account the burn-up for the purposes of storage and transportation. The Kola NPP VVER 440 requirements necessitated developing an especially adopted FAMOS 3 system. In addition tomore » the passive neutron measurement, a gross gamma detection and a boron concentration monitoring system are implemented. The new system was constructed as well as tested in laboratory experiments. The monitoring system has been delivered to the customer and is ready for use.« less

48 CFR - Unknown Title

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 7 2013-10-01 2012-10-01 true Section Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND SECURITY ACQUISITION REGULATION (HSAR) SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Constructio...

48 CFR - Unknown Title

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 7 2012-10-01 2012-10-01 false Section Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND SECURITY ACQUISITION REGULATION (HSAR) SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Special Aspects of Contracting for Constructio...

Definitions of Mathematical Knowledge for Teaching: Using These Constructs in Research on Secondary and College Mathematics Teachers

ERIC Educational Resources Information Center

Speer, Natasha M.; King, Karen D.; Howell, Heather

2015-01-01

The construct "mathematical knowledge for teaching" (MKT) has received considerable attention in the mathematics education community in recent years. The development and refinement of the MKT construct, including the components of common content knowledge (CCK) and specialized content knowledge (SCK), came from research into elementary…

29 CFR 776.27 - Construction which is related to covered production.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., within the State, of construction materials, such as sand, gravel, brick and other construction materials produced for general local use, is not covered even if the producer also supplies such materials to....19(b)(3); but see § 776.19 (b) (1), (2) and (3); on coverage of furnishing materials “specially...

29 CFR 776.27 - Construction which is related to covered production.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., within the State, of construction materials, such as sand, gravel, brick and other construction materials produced for general local use, is not covered even if the producer also supplies such materials to....19(b)(3); but see § 776.19 (b) (1), (2) and (3); on coverage of furnishing materials “specially...

29 CFR 776.27 - Construction which is related to covered production.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., within the State, of construction materials, such as sand, gravel, brick and other construction materials produced for general local use, is not covered even if the producer also supplies such materials to....19(b)(3); but see § 776.19 (b) (1), (2) and (3); on coverage of furnishing materials “specially...

48 CFR 19.1308 - Performance of work requirements (limitations on subcontracting) for general construction or...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Performance of work requirements (limitations on subcontracting) for general construction or construction by special trade contractors. 19.1308 Section 19.1308 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAM...

48 CFR 19.1308 - Performance of work requirements (limitations on subcontracting) for general construction or...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Performance of work requirements (limitations on subcontracting) for general construction or construction by special trade contractors. 19.1308 Section 19.1308 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAM...

48 CFR 19.1308 - Performance of work requirements (limitations on subcontracting) for general construction or...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Performance of work requirements (limitations on subcontracting) for general construction or construction by special trade contractors. 19.1308 Section 19.1308 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAM...

36 CFR 294.23 - Road construction and reconstruction in Idaho Roadless Areas.

Code of Federal Regulations, 2011 CFR

2011-07-01

... safety; (v) Road reconstruction is needed to implement a road safety improvement project on a road... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Road construction and..., DEPARTMENT OF AGRICULTURE SPECIAL AREAS Idaho Roadless Area Management § 294.23 Road construction and...

26 CFR 1.1039-1 - Certain sales of low-income housing projects.

Code of Federal Regulations, 2011 CFR

2011-04-01

... considered as the purchase or construction by A of such a project. (2) Special rules. (i) The cost of a... capital expenditures by the taxpayer that are attributable to acquisition, construction, or reconstruction..., 1970. If the taxpayer had begun construction of another qualified housing project on January 1, 1969...

26 CFR 1.1039-1 - Certain sales of low-income housing projects.

Code of Federal Regulations, 2012 CFR

2012-04-01

... considered as the purchase or construction by A of such a project. (2) Special rules. (i) The cost of a... capital expenditures by the taxpayer that are attributable to acquisition, construction, or reconstruction..., 1970. If the taxpayer had begun construction of another qualified housing project on January 1, 1969...

Lightning induced currents in aircraft wiring using low level injection techniques

NASA Technical Reports Server (NTRS)

Stevens, E. G.; Jordan, D. T.

1991-01-01

Various techniques were studied to predict the transient current induced into aircraft wiring bundles as a result of an aircraft lightning strike. A series of aircraft measurements were carried out together with a theoretical analysis using computer modeling. These tests were applied to various aircraft and also to specially constructed cylinders installed within coaxial return conductor systems. Low level swept frequency CW (carrier waves), low level transient and high level transient injection tests were applied to the aircraft and cylinders. Measurements were made to determine the transfer function between the aircraft drive current and the resulting skin currents and currents induced on the internal wiring. The full threat lightning induced transient currents were extrapolated from the low level data using Fourier transform techniques. The aircraft and cylinders used were constructed from both metallic and CFC (carbon fiber composite) materials. The results show the pulse stretching phenomenon which occurs for CFC materials due to the diffusion of the lightning current through carbon fiber materials. Transmission Line Matrix modeling techniques were used to compare theoretical and measured currents.

Progress of a room temperature electron cyclotron resonance ion source using evaporative cooling technology at Institute of Modern Physics.

PubMed

Lu, W; Xiong, B; Zhang, X Z; Sun, L T; Feng, Y C; Ma, B H; Guo, S Q; Cao, R; Ruan, L; Zhao, H W

2014-02-01

A new room temperature ECR ion source, Lanzhou Electron Cyclotron Resonance ion source No. 4 (LECR4, previously named DRAGON), is under intense construction at Institute of Modern Physics. LECR4 is designed to operate with 18 GHz microwave frequency. The maximum axial magnetic fields are 2.3 T at injection and 1.3 T at extraction, and the radial field at the plasma chamber wall of 76 mm inner diameter is 1.0-1.2 T. One of the unique features for LECR4 is that its axial solenoids are winded with solid square copper wires which are immersed in a kind of special evaporative cooling medium for cooling purpose. Till now, a prototype of the cooling system has been successfully constructed and tested, which has demonstrated that the cooling efficiency of the designed system could meet the requirements of LECR4 under the routine operation conditions. All the main components of the ion source have been completed. Assembly and commissioning is ongoing. The latest developments and test results will be presented in this paper.

Greenberger-Horne-Zeilinger paradoxes from qudit graph states.

PubMed

Tang, Weidong; Yu, Sixia; Oh, C H

2013-03-08

One fascinating way of revealing quantum nonlocality is the all-versus-nothing test due to Greenberger, Horne, and Zeilinger (GHZ) known as the GHZ paradox. So far genuine multipartite and multilevel GHZ paradoxes are known to exist only in systems containing an odd number of particles. Here we shall construct GHZ paradoxes for an arbitrary number (greater than 3) of particles with the help of qudit graph states on a special kind of graphs, called GHZ graphs. Furthermore, based on the GHZ paradox arising from a GHZ graph, we derive a Bell inequality with two d-outcome observables for each observer, whose maximal violation attained by the corresponding graph state, and a Kochen-Specker inequality testing the quantum contextuality in a state-independent fashion.

IOTA (Integrable Optics Test Accelerator): facility and experimental beam physics program

NASA Astrophysics Data System (ADS)

Antipov, S.; Broemmelsiek, D.; Bruhwiler, D.; Edstrom, D.; Harms, E.; Lebedev, V.; Leibfritz, J.; Nagaitsev, S.; Park, C. S.; Piekarz, H.; Piot, P.; Prebys, E.; Romanov, A.; Ruan, J.; Sen, T.; Stancari, G.; Thangaraj, C.; Thurman-Keup, R.; Valishev, A.; Shiltsev, V.

2017-03-01

The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, beam dynamics of space-charge effects and their compensation, optical stochastic cooling, and several other experiments. In this article, we present the design and main parameters of the facility, outline progress to date and provide the timeline of the construction, commissioning and research. The physical principles, design, and hardware implementation plans for the major IOTA experiments are also discussed.

Construction of a multimedia application on public network

NASA Astrophysics Data System (ADS)

Liu, Jang; Wang, Chwan-Huei; Tseng, Ming-Yu; Hsiao, Sun-Lang; Luo, Wen-Hen; Tseng, Yung-Mean; Hung, Feng-Yue

1994-04-01

This paper describes our perception of current developments in networking, telecommunication and technology of multimedia. As such, we have taken a constructive view. From this standpoint, we devised a client server architecture that veils servers from their customers. It adheres to our conviction that network and location independence for serve access is a future trend. We have constructed an on-line KARAOKE on an existing CVS (Chinese Videotex System) to test the workability of this architecture and it works well. We are working on a prototype multimedia service network which is a miniature client server structure of our proposal. A specially designed protocol is described. Through this protocol, an one-to-many connection can be set up and to provide for multimedia applications, new connections can be established within a basic connection. So continuous media may have their own connections without being interrupted by other media, at least from the view of an application. We have advanced a constructive view which is not a framework itself. But it is tantamount to a framework, in building systems as assembly of methods, technics, designs, and ideas. This is what a framework does with more flexibility and availability.

Application of self-balanced loading test to socketed pile in weak rock

NASA Astrophysics Data System (ADS)

Cheng, Ye; Gong, Weiming; Dai, Guoliang; Wu, JingKun

2008-11-01

Method of self-balanced loading test differs from the traditional methods of pile test. The key equipment of the test is a cell. The cell specially designed is used to exert load which is placed in pile body. During the test, displacement values of the top plate and the bottom plate of the cell are recorded according to every level of load. So Q-S curves can be obtained. In terms of test results, the bearing capacity of pile can be judged. Equipments of the test are simply and cost of it is low. Under some special conditions, the method will take a great advantage. In Guangxi Province, tertiary mudstone distributes widely which is typical weak rock. It is usually chosen as the bearing stratum of pile foundation. In order to make full use of its high bearing capacity, pile is generally designed as belled pile. Foundations of two high-rise buildings which are close to each other are made up of belled socketed piles in weak rock. To obtain the bearing capacity of the belled socketed pile in weak rock, loading test in situ should be taken since it is not reasonable that experimental compression strength of the mudstone is used for design. The self-balanced loading test was applied to eight piles of two buildings. To get the best test effect, the assembly of cell should be taken different modes in terms of the depth that pile socketed in rock and the dimension of the enlarged toe. The assembly of cells had been taken three modes, and tests were carried on successfully. By the self-balanced loading test, the large bearing capacities of belled socketed piles were obtained. Several key parameters required in design were achieved from the tests. For the data of tests had been analyzed, the bearing performance of pile tip, pile side and whole pile was revealed. It is further realized that the bearing capacity of belled socketed pile in the mudstone will decrease after the mudstone it socketed in has been immerged. Among kinds of mineral ingredient in the mudstone, montmorillonite is much. And in the size composition, content of cosmid is high. For specific surface area of cosmid is large and water intake capacity of it is strong, water content has great effect on strength of the mudstone. Along with water content increasing, strength of the mudstone declines nonlinear apparently. Since effective measures had been taken, the mudstone was prohibited from being immerged during construction. And valuable experience has been accumulated for similar projects construction henceforth.

Hydrothermal Geothermal Subprogram, Hawaii Geothermal Research Station, Hawaii County, Hawaii: Environmental assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-06-01

This environmental impact assessment addresses the design, construction, and operation of an electric generating plant (3 to 4 MWe) and research station (Hawaii Geothermal Research Station (HGRS)) in the Puna district on the Island of Hawaii. The facility will include control and support buildings, parking lots, cooling towers, settling and seepage ponds, the generating plant, and a visitors center. Research activities at the facility will evaluate the ability of a successfully flow-tested well (42-day flow test) to provide steam for power generation over an extended period of time (two years). In future expansion, research activities may include direct heat applicationsmore » such as aquaculture and the effects of geothermal fluids on various plant components and specially designed equipment on test modules. 54 refs., 7 figs., 22 tabs.« less

Advanced very high resolution radiometer

NASA Technical Reports Server (NTRS)

1978-01-01

The program covered the design, construction, and test of a Breadboard Model, Engineering Model, Protoflight Model, Mechanical/Structural Model, and a Life Test Model. Special bench test and calibration equipment was also developed for use on the program. Initially, the instrument was to operate from a 906 n.mi. orbit and be thermally isolated from the spacecraft. The Breadboard Model and the Mechanical/Structural Model were designed and built to these requirements. The spacecraft altitude was changed to 450 n.mi., IFOVs and spectral characteristics were modified, and spacecraft interfaces were changed. The final spacecraft design provided a temperature-controlled Instrument Mounting Platform (IMP) to carry the AVHRR and other instruments. The design of the AVHRR was modified to these new requirements and the modifications were incorporated in the Engineering Model. The Protoflight Model and the Flight Models conform to this design.

48 CFR 245.608-5 - Special items screening.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Disposal of Contractor Inventory 245.608-5 Special items screening. (a) Special test equipment with standard components. (1) The contractor shall report any excess special test equipment (STE) using SF 1432, Inventory Schedule D (Special Tooling and Special Test Equipment). The contractor shall list and describe on...

Child welfare organizations: Do specialization and service integration impact placement decisions?

PubMed

Smith, Carrie; Fluke, John; Fallon, Barbara; Mishna, Faye; Decker Pierce, Barbara

2018-02-01

The objective of this study was to contribute to the understanding of the child welfare organization by testing the hypothesis that the characteristics of organizations influence decisions made by child protection staff for vulnerable children. The influence of two aspects of organizational structure on the decision to place a child in out-of-home care were examined: service integration and worker specialization. A theoretical framework that integrated the Decision-Making Ecology Framework (Baumann et al., 2011) and Yoo et al. (2007) conceptual framework of organizational constructs as predictors of service effectiveness was tested. Secondary data analysis of the Ontario Incidence Study of Reported Child Abuse and Neglect - 2013 (OIS-2013) was conducted. A subsample of 4949 investigations from 16 agencies was included in this study. Given the nested structure of the data, multi-level modelling was used to test the relative contribution of case and organizational factors to the decision to place. Despite the reported differences among child welfare organizations and research that has demonstrated variance in the placement decision as a result of organizational factors, the structure of the organization (i.e., worker specialization and service integration) showed no predictive power in the final models. The lack of variance may be explained by the relatively low frequency of placements during the investigation phase of service, the hierarchical impact of the factors of the DME and the limited information available regarding the structure of child welfare organizations in Ontario. Suggestions for future research are provided. Copyright © 2017 Elsevier Ltd. All rights reserved.

An introduction to testing parachutes in wind tunnels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Macha, J.

1991-01-01

This paper reviews some of the technical considerations and current practices for testing parachutes in conventional wind tunnels. Special challenges to the experimentalist caused by the fabric construction, flexible geometry, and buff shape of parachutes are discussed. In particular, the topics of measurement technique, similarity considerations, and wall interference are addressed in a summary manner. Many references are cited which provide detailed coverage of the state of the art in testing methods. From the discussions presented, it is obvious that there are some serious problems with state of the art methods, especially in the area of canopy instrumentation and whenmore » working with reduced-scale models. But if the experimentalist is informed about the relative importance of the various factors for a specific test objective, it is usually possible to design a test that will yield meaningful results. The lower cost and the more favorable measurement environment of wind tunnels make their use an attractive alternative to flight testing whenever possible. 26 refs., 5 figs., 1 tab.« less

The students' interest for 2012 and 2013 cohort in construction engineering vocational education program Universitas Negeri Semarang in choosing the subject specialization

NASA Astrophysics Data System (ADS)

Julianto, Eko Nugroho; Salamah, Ummu

2017-03-01

On the 2012 curriculum, Vocational Education Program Universitas Negeri Semarang allowed the students to choose subjects for their specialization according to their ability. The subject specialization was given at the 6th semester to provide students in performing field work experience. Each course has its own enthusiasts specialization, students have certain considerations in selecting the course. The consideration of each of them is different from one another because they have their own talents, interests, aspirations and perceptions or a different view in assessing a subject specialization offered by Construction Engineering Vocational Education Program. The purpose of this study was to determine the amount of interest caused by intrinsic and extrinsic factors on 2012 and 2013 students' cohort in selecting subjects of specialization. This research is descriptive with quantitative approach, which is carried out to determine the magnitude of the interest students in choosing courses of specialization. Research conducted at the Civil Engineering Department Universitas Negeri Semarang, with research subjects that students PTB forces in 2012 and 2013, with a total sample of 87 students. The results showed that the interest of the student of 2012 and 2013 in selecting subjects of specialization is equal to 68.06% with the criteria are interested in contributions from intrinsic factors indicate the yield at 35.48% and 64.52% extrinsic factors.

Automated method for structural segmentation of nasal airways based on cone beam computed tomography

NASA Astrophysics Data System (ADS)

Tymkovych, Maksym Yu.; Avrunin, Oleg G.; Paliy, Victor G.; Filzow, Maksim; Gryshkov, Oleksandr; Glasmacher, Birgit; Omiotek, Zbigniew; DzierŻak, RóŻa; Smailova, Saule; Kozbekova, Ainur

2017-08-01

The work is dedicated to the segmentation problem of human nasal airways using Cone Beam Computed Tomography. During research, we propose a specialized approach of structured segmentation of nasal airways. That approach use spatial information, symmetrisation of the structures. The proposed stages can be used for construction a virtual three dimensional model of nasal airways and for production full-scale personalized atlases. During research we build the virtual model of nasal airways, which can be used for construction specialized medical atlases and aerodynamics researches.

Journal of Special Operations Medicine, Volume 3, Edition 3

DTIC Science & Technology

2003-01-01

focuses on the basic design, construction, uti - lization, components, and nomenclature associated with the ICS. Objectives: 1. Maximize the overall...TX 76134 9. American Society of Health-System Pharmacists : AHFS Drug Information. Bethesda, Maryland; 2002:1305 Journal of Special Operations

7 CFR 1710.250 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... (i) A borrower's CWP or special engineering studies must be supported by a Borrower's Environmental..., and retirements. The primary components of the system consist of long-range engineering plans, construction work plans (CWPs), CWP amendments, and special engineering and cost studies. Long range...

7 CFR 1753.68 - Purchasing special equipment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... operating systems to increase system capacity that require components made by the manufacturer of the... operating systems in the borrower's system, or with complete systems of special equipment from other... AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Purchase and Installation of...

7 CFR 1753.68 - Purchasing special equipment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... operating systems to increase system capacity that require components made by the manufacturer of the... operating systems in the borrower's system, or with complete systems of special equipment from other... AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Purchase and Installation of...

7 CFR 1753.68 - Purchasing special equipment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... operating systems to increase system capacity that require components made by the manufacturer of the... operating systems in the borrower's system, or with complete systems of special equipment from other... AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Purchase and Installation of...

7 CFR 1753.68 - Purchasing special equipment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... operating systems to increase system capacity that require components made by the manufacturer of the... operating systems in the borrower's system, or with complete systems of special equipment from other... AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Purchase and Installation of...

7 CFR 1753.68 - Purchasing special equipment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... operating systems to increase system capacity that require components made by the manufacturer of the... operating systems in the borrower's system, or with complete systems of special equipment from other... AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Purchase and Installation of...

Reproducibility of manual pressure force on provocation of the sacroiliac joint.

PubMed

Levin, U; Nilsson-Wikmar, L; Stenström, C H; Lundeberg, T

1998-01-01

Previous studies of pain-provocation sacroiliac (SI) joint tests have revealed conflicting results. The aim of the present study was to evaluate the intra- and inter-test reliability of pressure force applied during distraction test, compression test and pressure on the apex sacralis. Seventeen physiotherapists (PTs), median age 43 years and median clinical experience 11 years, all experienced in musculoskeletal evaluation and therapy, participated in the study. Each PT performed each test on the same healthy volunteer for 20 s, on three separate occasions, at intervals of one week using a specially constructed examination table which registered pressure force. The PTs were capable of maintaining a relatively constant pressure force for 20 s. The intra-test reliability was acceptable even though there were individual differences on different occasions between those PTs who used the SI joint tests often and those who seldom or never used them. The inter-test reliability was insufficient. The findings indicate the advantage of registering pressure force as a complement for standardized methods for pain-provoking tests and when learning provocation tests, since individual variability was considerable.

Normative and economic foundations of high-rise construction in the city of Samara

NASA Astrophysics Data System (ADS)

Didkovskaya, Olga V.; Bocharov, Aleksey Y.; Ilyina, Marina V.; Mamaeva, Olga A.

2018-03-01

Every year the number of free land plots for construction of buildings is steadily decreasing in cities. In this regard, the participants in the investment and construction process are increasingly seeking to maximize the use of land. A logical way for this is to use high-rise construction. However, until recently, builders encountered serious obstacles in the form of lack of special norms and rules for the design of high-rise buildings. It led to the need for individual coordination of each high-rise facility, the development and approval of special technical conditions, the passage of numerous administrative approvals. Thus, investment activity regarding the construction of high-rise buildings in the Russian Federation is reduced. In 2016, there were regulatory changes that substantially alleviated these difficulties. In this article, the authors analyze the features of the town-planning normative-legal field of high-rise construction and its development, track the interrelations between the regulatory regulation of the construction of similar facilities, with the real need, the technical feasibility and economic feasibility of their construction in the urban district of Samara. Conclusions and suggestions are also based on the analysis of the norms of urban zoning, the residential real estate market and the value of land plots.

Pushability and frictional characteristics of medical instruments.

PubMed

Wünsche, P; Werner, C; Bloss, P

2002-01-01

A tensile testing equipment is combined with a torque module and a 3D force tranducer to characterize the pushability of catheter systems inside modular vessel phantoms. The modular construction of the phantom allows using two dimensional vessel shapes with different contours. Inside the phantom we put a tube or a guide catheter in which the instruments are pushed or redrawn in the presence of a liquid (water, blood, etc.) at body temperature. During pushing or redrawing we measure axial and rotational values. Additionally, friction forces and coefficients are separately determined by using a special designed friction module. First results are presented and discussed.

Recommended Practice for Use of Emissive Probes in Electric Propulsion Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheehan, J. P.; Raitses, Yevgeny; Hershkowitz, Noah

Here, this article provides recommended methods for building, operating, and taking plasma potential measurements from electron-emitting probes in electric propulsion devices, including Hall thrusters, gridded ion engines, and others. The two major techniques, the floating point technique and the inflection point technique, are described in detail as well as calibration and error-reduction methods. The major heating methods are described as well as the various considerations for emissive probe construction. Lastly, special considerations for electric propulsion plasmas are addressed, including high-energy densities, ion flows, magnetic fields, and potential fluctuations. Recommendations for probe design and operation are provided.

Recommended Practice for Use of Emissive Probes in Electric Propulsion Testing

DOE PAGES

Sheehan, J. P.; Raitses, Yevgeny; Hershkowitz, Noah; ...

2016-11-03

Here, this article provides recommended methods for building, operating, and taking plasma potential measurements from electron-emitting probes in electric propulsion devices, including Hall thrusters, gridded ion engines, and others. The two major techniques, the floating point technique and the inflection point technique, are described in detail as well as calibration and error-reduction methods. The major heating methods are described as well as the various considerations for emissive probe construction. Lastly, special considerations for electric propulsion plasmas are addressed, including high-energy densities, ion flows, magnetic fields, and potential fluctuations. Recommendations for probe design and operation are provided.

An Instructional Playground for the Handicapped Using Tires as Inexpensive Playground Equipment: Activity and Construction Manual.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Special Education Instructional Materials Center.

The manual explains how special education students in an occupational program used tires to construct an inexpensive instructional playground for handicapped elementary school pupils. Presented in two sections with accompanying pictures or diagrams are activity ideas for using the tires in a variety of configurations (Part 1) and construction and…

Physical environment. [environmental impact statement required for general aviation airport construction

NASA Technical Reports Server (NTRS)

1975-01-01

Environmental legislation affecting airports and the more common environmental effects resulting from airport construction are discussed with special emphasis on general aviation airports. The discussion is focused on the regulation of noise, pollution, and water quality.

Webs on surfaces, rings of invariants, and clusters.

PubMed

Fomin, Sergey; Pylyavskyy, Pavlo

2014-07-08

We construct and study cluster algebra structures in rings of invariants of the special linear group action on collections of 3D vectors, covectors, and matrices. The construction uses Kuperberg's calculus of webs on marked surfaces with boundary.

Dam construction impacts on multiscale characterization of sediment discharge in two typical karst watersheds of southwest China

NASA Astrophysics Data System (ADS)

Li, Zhenwei; Xu, Xianli; Xu, Chaohao; Liu, Meixian; Wang, Kelin

2018-03-01

Southwest China, as one of the largest continuous karst areas in the world, is a severely eroded region due to its special geological condition. Thus, soil and water conservation measures such as dam construction have been extensively implemented in this region to control sediment delivery. However, it remains unclear how dam construction affects multiscale variability of sediment discharge (SD) and its potentially influential factors in southwest China. To assess this, annual SD, water discharge (WD), precipitation (PT), potential evapotranspiration (PET), and normalized differential vegetation index (NDVI) data from 1955 to 2015 were obtained from two karst watersheds of Liujiang (no large dams) and Hongshui (dam-controlled). These sites shared the similar climatic conditions. The Mann-Kendal test, Wilcoxon rank-sum test, and continuous wavelet transform analysis was used to detect the trends and periodicity in SD, and wavelet coherence analysis were employed to detect the temporal covariance between SD and WD, PT, PET, and NDVI. Results indicated that the multiscale variability of SD was strongly influenced by dam construction. The annual SD showed significant 4-year periodic oscillation in the Liujiang watershed, while no significant cycles were found in the Hongshui watershed. Dam construction exerted substantial influence on the multiscale correlations between SD and its associated factors. The time scales that the NDVI resonated with SD were concentrated on the periodicity of 2- and 3-year in the Liujiang watershed. In contrast, no significant periodicities were observed in the Hongshu watershed. This study yields a greater understanding of SD dynamics, and is helpful for better watershed management in karst areas of southwest China.

33 CFR 322.5 - Special policies.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 322.5 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF... Special policies. The Secretary of the Army has delegated to the Chief of Engineers the authority to issue...), the district engineer will review the applicant's provisions for siting, constructing, monitoring...

33 CFR 322.5 - Special policies.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 322.5 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF... Special policies. The Secretary of the Army has delegated to the Chief of Engineers the authority to issue...), the district engineer will review the applicant's provisions for siting, constructing, monitoring...

33 CFR 322.5 - Special policies.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 322.5 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF... Special policies. The Secretary of the Army has delegated to the Chief of Engineers the authority to issue...), the district engineer will review the applicant's provisions for siting, constructing, monitoring...

Special Issue: Productive Employment for the Poor.

ERIC Educational Resources Information Center

Gaude, Jacques, Ed.; Miller, Steven, Ed.

1992-01-01

This special issue contains nine articles on labor-intensive public works, social investment funds, rural infrastructure projects, grassroots socioeconomic rights, remuneration systems for self-help projects, road construction and rural transport, employment and environmental rehabilitation, and water as a source of employment. (SK)

47 CFR 1.61 - Procedures for handling applications requiring special aeronautical study.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Procedures for handling applications requiring special aeronautical study. (a) Antenna Structure Registration is conducted by the Wireless Telecommunications Bureau as follows: (1) Each antenna structure owner... modified construction, register that antenna structure with the Wireless Telecommunications Bureau using...

Reliability and validity of the Modified Erikson Psychosocial Stage Inventory in diverse samples.

PubMed

Leidy, N K; Darling-Fisher, C S

1995-04-01

The Modified Erikson Psychosocial Stage Inventory (MEPSI) is a relatively simple survey measure designed to assess the strength of psychosocial attributes that arise from progression through Erikson's eight stages of development. The purpose of this study was to employ secondary analysis to evaluate the internal-consistency reliability and construct validity of the MEPSI across four diverse samples: healthy young adults, hemophilic men, healthy older adults, and older adults with chronic obstructive pulmonary disease. Special attention was given to the performance of the measure across gender, with exploratory analyses examining possible age cohort and health status effects. Internal-consistency estimates for the aggregate measure were high, whereas subscale reliability levels varied across age groups. Construct validity was supported across samples. Gender, cohort, and health effects offered interesting psychometric and theoretical insights and direction for further research. Findings indicated that the MEPSI might be a useful instrument for operationalizing and testing Eriksonian developmental theory in adults.

Linking subordinate political skill to supervisor dependence and reward recommendations: a moderated mediation model.

PubMed

Shi, Junqi; Johnson, Russell E; Liu, Yihao; Wang, Mo

2013-03-01

In this study, we examined the relations of subordinate political skill with supervisor's dependence on the subordinate and supervisor reward recommendation, as well as mediating (interaction frequency with supervisor) and moderating (supervisor political behavior) variables of these relations. Our theoretical model was tested using data collected from employees in a company that specialized in construction management. Analyses of multisource and lagged data from 53 construction management team supervisors and 296 subordinates indicated that subordinate political skill was positively related to supervisor reward recommendation via subordinate's interaction frequency with supervisor. Although interaction frequency with a supervisor was also positively related to the supervisor's dependence on the subordinate, the indirect effect of subordinate political skill on dependence was not significant. Further, both the relationship between subordinate political skill and interaction frequency with a supervisor and the indirect relationships between subordinate political skill and supervisor reward recommendation were stronger when supervisors exhibited more political behavior.

A new construction of measurement system based on specialized microsystem design for laryngological application

NASA Astrophysics Data System (ADS)

Paczesny, Daniel; Mikłaszewicz, Franciszek

2013-10-01

This article describes the design, construction and parameters of diagnostic medical system for air humidity measurement which can be proceeded in various places of human nasal cavities and also human throat. The system can measure dynamic changes of dew point temperature (absolute value of humidity) of inspired and expired air in different places of human upper airways. During regular respiration process dew point temperature is measured in nasal cavity, middle part cavity and nasopharynx. The presented system is the next step in construction of measurement system based on specialized microsystem for laryngological application. The microsystem fabricated on silicon substrate includes microheater, microthermoresistor and interdigitated electrodes. In comparison with previously built measurement system with current version some system functionalities and measurement parameters were improved. Additionally 3D printing technology was applied for rapid prototyping a measurement system housing. Presented measurement system is set of microprocessor module with signal conditioning circuits; heated measurement head based on specialized microsystem with disposable heated pipe for air sucking from various places of upper airways; power supplier and computer application for monitoring all system parameters and presenting on-line and off-line measured results. Some example results of constructed measurement system and dew point temperature measurements during respiration cycle are presented.

The Power of Specialized Educational Environments in the Development of Giftedness: The Need for Research on Social Context

ERIC Educational Resources Information Center

Coleman, Laurence J.

2014-01-01

The paper argues that educators of the gifted have overlooked important evidence on the power of special environments because of our habit of considering cognitive outcomes and an outsider view of evidence as the standard for judging the benefits of special environments. The author proposes that social context be used as a construct to help…

Engineering behavior of small-scale foundation piers constructed from alternative materials

NASA Astrophysics Data System (ADS)

Prokudin, Maxim Mikhaylovich

Testing small-scale prototype pier foundations to evaluate engineering behavior is an alternative to full-scale testing that facilitates testing of several piers and pier groups at relatively low cost. In this study, various pier systems and pier groups at one tenth scale were subjected to static vertical loading under controlled conditions to evaluate stiffness, bearing capacity, and group efficiency. Pier length, material properties and methods of installation were evaluated. Pier length to diameter ratios varied between four and eight. A unique soil pit with dimensions of 2.1 m in width, 1.5 m in length and 2.0 m in depth was designed to carry out this research. The test pit was filled with moisture conditioned and compacted Western Iowa loess. A special load test frame was designed and fabricated to provide up to 25,000 kg vertical reaction force for load testing. A load cell and displacement instrumentation was setup to capture the load test data. Alternative materials to conventional cement concrete were studied. The pier materials evaluated in this study included compacted aggregate, cement stabilized silt, cementitious grouts, and fiber reinforced silt. Key findings from this study demonstrated that (1) the construction method influences the behavior of aggregate piers, (2) the composition of the pier has a significant impact on the stiffness, (3) group efficiencies were found to be a function of pier length and pier material, (4) in comparison to full-scale testing the scaled piers were found to produce a stiffer response with load-settlement and bearing capacities to be similar. Further, although full-scale test results were not available for all pier materials, the small-scale testing provided a means for comparing results between pier systems. Finally, duplicate pier tests for a given length and material were found to be repeatable.

Seismic vulnerability of new highway construction, executive summary.

DOT National Transportation Integrated Search

2002-03-01

This executive summary gives an overview of the results of FHWA Contract DTFH61-92-C-00112, Seismic Research Program, : which performed a series of special studies addressing the seismic design of new construction. The objectives of this project : we...

Seismic Vulnerability of New Highway Construction, Executive Summary.

DOT National Transportation Integrated Search

2002-03-01

This executive summary gives an overview of the results of FHWA Contract DTFH61-92-C-00112, Seismic Research Program, which performed a series of special studies addressing the seismic design of new construction. The objectives of this project were t...

10 CFR 60.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES General..., special nuclear, and byproduct material at a geologic repository operations area sited, constructed, or... at a geologic repository operations area sited, constructed, or operated at Yucca Mountain, Nevada...

Special pliers connect hose containing liquid under pressure

NASA Technical Reports Server (NTRS)

Blaydes, R. A.

1964-01-01

For speed and safety in handling disconnect fittings on a hose carrying liquid under pressure, special pliers have been constructed. A gear and rack mechanism is combined with two or more wide-opening U-shaped jaws which are placed over the quick-disconnect fittings.

Red River of the North Main Stem: Technical Information Report (with Special Emphasis on Agricultural Levees).

DTIC Science & Technology

1982-07-01

farmers to construct their own levees. These levees prevented flooding of thousands of acres of cropland. This success led to extensive agricultural...levee construction by farmers on both sides of the river. Various Federal and State agencies expressed concern over the potential adverse impacts of...uncontrolled levee construction . The Corps of Engineer’s analysis showed that continued levee construction would significantly increase flood stages and

47 CFR 73.1515 - Special field test authorizations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false Special field test authorizations. 73.1515 Section 73.1515 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Rules Applicable to All Broadcast Stations § 73.1515 Special field test authorizations. (a) A special field test...

47 CFR 73.1515 - Special field test authorizations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false Special field test authorizations. 73.1515 Section 73.1515 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Rules Applicable to All Broadcast Stations § 73.1515 Special field test authorizations. (a) A special field test...

49 CFR 1242.04 - Special tests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 9 2014-10-01 2014-10-01 false Special tests. 1242.04 Section 1242.04... BETWEEN FREIGHT SERVICE AND PASSENGER SERVICE FOR RAILROADS 1 General § 1242.04 Special tests. When the separation of common expense accounts between freight and passenger services is based upon special tests or...

49 CFR 1242.04 - Special tests.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 9 2012-10-01 2012-10-01 false Special tests. 1242.04 Section 1242.04... BETWEEN FREIGHT SERVICE AND PASSENGER SERVICE FOR RAILROADS 1 General § 1242.04 Special tests. When the separation of common expense accounts between freight and passenger services is based upon special tests or...

Molten salt thermal energy storage subsystem for Solar Thermal Central Receiver plants

NASA Astrophysics Data System (ADS)

Wells, P. B.; Nassopoulos, G. P.

The development of a low-cost thermal energy storage subsystem for large solar plants is analyzed. Molten nitrate salt is used as both the plant's working fluid and as the storage medium. The storage system comprises a specially designed hot tank to hold salt at a storage temperature of 839 K (1050 F) and a separate carbon steel cold tank to hold the salt after its thermal energy has been extracted to generate steam. The hot tank is lined with insulating firebrick to lower the shell temperature to 561 K (550 F) so that a low-cost carbon steel shell can be used. A preliminary design is described for a large commercial-size plant (1200 MWht). Also described are a laboratory test program for the critical components and the design, construction, and test of a small-scale research experiment at the Central Receiver Test Facility in Albuquerque, New Mexico.

The NASA Langley Laminar-Flow-Control (LFC) experiment on a swept, supercritical airfoil: Design overview

NASA Technical Reports Server (NTRS)

Harris, Charles D.; Harvey, William D.; Brooks, Cuyler W., Jr.

1988-01-01

A large-chord, swept, supercritical, laminar-flow-control (LFC) airfoil was designed and constructed and is currently undergoing tests in the Langley 8 ft Transonic Pressure Tunnel. The experiment was directed toward evaluating the compatibility of LFC and supercritical airfoils, validating prediction techniques, and generating a data base for future transport airfoil design as part of NASA's ongoing research program to significantly reduce drag and increase aircraft efficiency. Unique features of the airfoil included a high design Mach number with shock free flow and boundary layer control by suction. Special requirements for the experiment included modifications to the wind tunnel to achieve the necessary flow quality and contouring of the test section walls to simulate free air flow about a swept model at transonic speeds. Design of the airfoil with a slotted suction surface, the suction system, and modifications to the tunnel to meet test requirements are discussed.

GASCan 2 payload integration

NASA Technical Reports Server (NTRS)

Cody, Dennis J.; Concepcion, Allan G.; Watras, Edward C., III

1995-01-01

This project, conducted in cooperation with the NASA Advanced Space Design Program, is part of an ongoing effort to place an experiment package into space. The goal of this project is to build and test flight-ready hardware that can be launched from the Space Shuttle. Get Away Special Canister 2 (GASCan 2) consists of three separate experiments. The Ionospheric Properties and Propagation Experiment (IPPE) determines effects of the ionosphere on radio wave propagation. The Microgravity Ignition experiment (MGI) tests the effects of combustion in a microgravity environment. The Rotational Fluid Flow experiment (RFF) examines fluid behavior under varying levels of gravity. This year the following tasks were completed: design of the IPPE antenna, X- and J-cell battery boxes, J-cell battery box enclosure, and structural bumpers; construction of the MGI canisters, MGI mounting brackets, IPPE antenna, and battery boxes; and the selection of the RFF's operating fluid and the analysis of the fluid behavior under microgravity test conditions.

Sensitivity test of derivative matrix isopotential synchronous fluorimetry and least squares fitting methods.

PubMed

Makkai, Géza; Buzády, Andrea; Erostyák, János

2010-01-01

Determination of concentrations of spectrally overlapping compounds has special difficulties. Several methods are available to calculate the constituents' concentrations in moderately complex mixtures. A method which can provide information about spectrally hidden components in mixtures is very useful. Two methods powerful in resolving spectral components are compared in this paper. The first method tested is the Derivative Matrix Isopotential Synchronous Fluorimetry (DMISF). It is based on derivative analysis of MISF spectra, which are constructed using isopotential trajectories in the Excitation-Emission Matrix (EEM) of background solution. For DMISF method, a mathematical routine fitting the 3D data of EEMs was developed. The other method tested uses classical Least Squares Fitting (LSF) algorithm, wherein Rayleigh- and Raman-scattering bands may lead to complications. Both methods give excellent sensitivity and have advantages against each other. Detection limits of DMISF and LSF have been determined at very different concentration and noise levels.

Current and future perspectives on the development ...

EPA Pesticide Factsheets

Safety-related problems continue to be one of the major reasons of attrition in drug development. Non-testing approaches to predict toxicity could form part of the solution. This review provides a perspective of current status of non-testing approaches available for the prediction of different toxicity endpoints. A framework for the development, evaluation and assessment of (Q)SARs is presented together with several examples. A workflow for performing read-across predictions within category and analogue approaches is presented and the shortcomings discussed. In light of the advances in high throughput (HT) approaches and constructs such as adverse outcome pathways (AOPs) coming on-line to help in interpreting such HT data, the ways in which non-testing approaches are developed are also evolving. We discuss what the future of these approaches might look like and outline how their integration could be useful in screening toxicity for drug development. Invited review article for CRT for a special issue.

Laboratory Study of the Noticeability and Annoyance of Sounds of Low Signal-to-Noise Ratio

NASA Technical Reports Server (NTRS)

Sneddon, Matthew; Howe, Richard; Pearsons, Karl; Fidell, Sanford

1996-01-01

This report describes a study of the noticeability and annoyance of intruding noises to test participants who were engaged in a distracting foreground task. Ten test participants read material of their own choosing while seated individually in front of a loudspeaker in an anechoic chamber. One of three specially constructed masking noise environments with limited dynamic range was heard at all times. A laboratory computer produced sounds of aircraft and ground vehicles as heard at varying distances at unpredictable intervals and carefully controlled levels. Test participants were instructed to click a computer mouse at any time that a noise distinct from the background noise environment came to their attention, and then to indicate their degree of annoyance with the noise that they had noticed. The results confirmed that both the noticeability of noise intrusions and their annoyance were closely related to their audibility.

Construction of a Specialized Cloning Strain of E. Coli for the Nitrate Reductase Genes of Haloferax Denitrificans

NASA Technical Reports Server (NTRS)

Johnson, Emmett

1999-01-01

This is the final report on Joint Research Interchange (NCC2-5011) "Construction of a Specialized Cloning Strain of E.. coli for the Nitrate Reductase Genes of Haloferax denitrificans." Originally the award was 11/l/93-10/31/95, but there were no-cost extensions made, because of a year Sabbatical at the Pasteur Institute in Paris and other leaves of 3 months each at the Pasteur Institute, during which work could not be done on this project, which extended the closing date to 10/30/98.

The Construction of Defense Department Contracts in Thin Markets

DTIC Science & Technology

2014-04-30

future rounds of contracting. An example of a good or service with a high degree of specialized investments is the production of flu vaccines ...Producing flu vaccines requires a substantial investment in scientific research (a highly specialized human skill) and specialized laboratories and...equipment. If the purchasing government finds that the flu vaccine it purchases does not meets its needs, then it cannot easily find another vendor

48 CFR 236.201 - Evaluation of contractor performance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CONTRACTS Special Aspects of Contracting for Construction 236.201 Evaluation of contractor performance. (a) Preparation of performance evaluation reports. Use DD Form 2626, Performance Evaluation (Construction... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Evaluation of contractor...

48 CFR 836.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2012 CFR

2012-10-01

... with architect-engineer firms. 836.209 Section 836.209 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER...-engineer firms. (a) When the contracting officer considers it necessary or advantageous to award a contract...

48 CFR 836.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2011 CFR

2011-10-01

... with architect-engineer firms. 836.209 Section 836.209 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER...-engineer firms. (a) When the contracting officer considers it necessary or advantageous to award a contract...

48 CFR 836.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2010 CFR

2010-10-01

... with architect-engineer firms. 836.209 Section 836.209 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER...-engineer firms. (a) When the contracting officer considers it necessary or advantageous to award a contract...

48 CFR 36.702 - Forms for use in contracting for architect-engineer services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... contracting for architect-engineer services. 36.702 Section 36.702 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Standard and Optional Forms for Contracting for Construction, Architect-Engineer Services, and...

48 CFR 36.702 - Forms for use in contracting for architect-engineer services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... contracting for architect-engineer services. 36.702 Section 36.702 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Standard and Optional Forms for Contracting for Construction, Architect-Engineer Services, and...

48 CFR 836.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2014 CFR

2014-10-01

... with architect-engineer firms. 836.209 Section 836.209 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER...-engineer firms. (a) When the contracting officer considers it necessary or advantageous to award a contract...

48 CFR 836.209 - Construction contracts with architect-engineer firms.

Code of Federal Regulations, 2013 CFR

2013-10-01

... with architect-engineer firms. 836.209 Section 836.209 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER...-engineer firms. (a) When the contracting officer considers it necessary or advantageous to award a contract...

48 CFR 36.702 - Forms for use in contracting for architect-engineer services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... contracting for architect-engineer services. 36.702 Section 36.702 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Standard and Optional Forms for Contracting for Construction, Architect-Engineer Services, and...

Thermal comfort of dual-chamber ski gloves

NASA Astrophysics Data System (ADS)

Dotti, F.; Colonna, M.; Ferri, A.

2017-10-01

In this work, the special design of a pair of ski gloves has been assessed in terms of thermal comfort. The glove 2in1 Gore-Tex has a dual-chamber construction, with two possible wearing configurations: one called “grip” to maximize finger flexibility and one called “warm” to maximize thermal insulation in extremely cold conditions. The dual-chamber gloves has been compared with two regular ski gloves produced by the same company. An intermittent test on a treadmill was carried out in a climatic chamber: it was made of four intense activity phases, during which the volunteer ran at 9 km/h on a 5% slope for 4 minutes, spaced out by 5-min resting phases. Finger temperature measurements were compared with the thermal sensations expressed by two volunteers during the test.

IOTA (Integrable Optics Test Accelerator): Facility and experimental beam physics program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Antipov, Sergei; Broemmelsiek, Daniel; Bruhwiler, David

The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, beam dynamics of space-charge effects and their compensation, optical stochastic cooling, and several other experiments. In this article, we present the design and main parameters of the facility, outline progress to date and provide the timeline of the construction, commissioning andmore » research. Finally, the physical principles, design, and hardware implementation plans for the major IOTA experiments are also discussed.« less

IOTA (Integrable Optics Test Accelerator): Facility and experimental beam physics program

DOE PAGES

Antipov, Sergei; Broemmelsiek, Daniel; Bruhwiler, David; ...

2017-03-06

The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, beam dynamics of space-charge effects and their compensation, optical stochastic cooling, and several other experiments. In this article, we present the design and main parameters of the facility, outline progress to date and provide the timeline of the construction, commissioning andmore » research. Finally, the physical principles, design, and hardware implementation plans for the major IOTA experiments are also discussed.« less

Investigation of fuselage acoustic treatment for a twin-engine turboprop aircraft in flight and laboratory tests

NASA Technical Reports Server (NTRS)

Mixson, J. S.; Oneal, R. L.; Grosveld, F. W.

1984-01-01

A flight and laboratory study of sidewall acoustic treatment for cabin noise control is described. In flight, cabin noise levels were measured at six locations with three treatment configurations. Noise levels from narrow-band analysis are reduced to one-third octave format and used to calculate insertion loss, IL, defined as the reduction of interior noise associated with the addition of a treatment. Laboratory tests used a specially constructed structural panel modeled after the propeller plane section of the aircraft sidewall, and acoustic treatments representing those used in flight. Lab measured transmission loss and absorption values were combined using classical acoustic procedures to obtain a prediction of IL. Comparison with IL values measured in flight for the boundary layer component of the noise indicated general agreement.

Vocational Instructional Materials in Horticulture for Students with Special Needs.

ERIC Educational Resources Information Center

Ethridge, James I.

This resource catalog of horticulture curriculum materials for students with special needs is divided into twenty-seven instructional areas: aboriculture; annuals; entomology; floral crops production; floral design and flower shop operations; garden center; greenhouse; ground covers and hedges; herbs; house plants; landscape construction and…

An Analysis of Motivation in Three Self-Determination Curricula

ERIC Educational Resources Information Center

Sinclair, James; Bromley, Katherine W.; Shogren, Karrie A.; Murray, Christopher; Unruh, Deanne K.; Harn, Beth A.

2017-01-01

Self-determination skill development is a central construct in the field of secondary special education. Recently, there has been discussion to revisit the motivational theoretical roots that influence the conceptualization of self-determination in special education, and merge motivational theories with instructional practices. Self-determination…

75 FR 35516 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-22

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2010-0147] Pipeline Safety: Request for Special Permit AGENCY: Pipeline and Hazardous Materials... with the Class 1 location portion of a 7.4 mile natural gas pipeline to be constructed in Alaska. This...

Supporting Mathematical Proficiency

ERIC Educational Resources Information Center

Allsopp, David; Lovin, LouAnn H.; van Ingen, Sarah

2017-01-01

Special educators can play an essential role in the development of students' understanding of and capacity to do mathematics. Whether a special education teacher's goal is to help kindergartners develop counting skills or to support 10th graders in constructing geometric proofs and whether instruction will occur in co teaching, consulting, or…

Building America Case Study: Ground Source Heat Pump Research, TaC Studios Residence, Atlanta, Georigia (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2014-09-01

As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA in the mixed-humid climate. This home serves as a residence and home office for the firm's owners, as well as a demonstration of their design approach to potential and current clients. Southface believes the home demonstrates current best practices for the mixed-humid climate, including a building envelope featuring advanced air sealing details and low density spray foam insulation, glazing that exceeds ENERGY STARmore » requirements, and a high performance heating and cooling system. Construction quality and execution was a high priority for TaC Studios and was ensured by a third party review process. Post construction testing showed that the project met stated goals for envelope performance, an air infiltration rate of 2.15 ACH50. The homeowner's wished to further validate whole house energy savings through the project's involvement with Building America and this long-term monitoring effort. As a Building America test home, this home was evaluated to detail whole house energy use, end use loads, and the efficiency and operation of the ground source heat pump and associated systems. Given that the home includes many non-typical end use loads including a home office, pool, landscape water feature, and other luxury features not accounted for in Building America modeling tools, these end uses were separately monitored to determine their impact on overall energy consumption.« less

Design, testing and emplacement of sand-bentonite for the construction of a gas-permeable seal test (gast)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Teodori, Sven-Peter; Ruedi, Jorg; Reinhold, Matthias

2013-07-01

The main aim of a gas-permeable seal is to increase the gas transport capacity of the backfilled underground structures without compromising the radionuclide retention capacity of the engineered barrier system or the host rock. Such a seal, proposed by NAGRA as part of the 'Engineered Gas Transport System' in a L/ILW repository, considers specially designed backfill and sealing materials such as sand/bentonite (S/B) mixtures with a bentonite content of 20- 30%. NAGRA's RD and D plan foresees demonstrating the construction and performance of repository seals and improving the understanding and the database for reliably predicting water and gas transport throughmore » these systems. The fluid flow and gas transport properties of these backfills have been determined at the laboratory scale and through modelling the maximum gas pressures in the near field of a repository system and the gas flow rates have been evaluated. Within this context, the Gas-permeable Seal Test (GAST) was constructed at Grimsel Test Site (GTS) to validate the effective functioning of gas-permeable seals at realistic scale. The intrinsic permeability of such seals should be in the order of 10-18 m2. Because the construction of S/B seals is not common practice for construction companies, a stepwise approach was followed to evaluate different construction and quality assurance methods. As a first step, an investigation campaign with simple tests in the laboratory and in the field followed by 1:1 scale pre-tests at GTS was performed. Through this gradual increase of the degree of complexity, practical experience was gained and confidence in the methods and procedures to be used was built, which allowed reliably producing and working with S/B mixtures at a realistic scale. During the whole pre-testing phase, a quality assurance (QA) programme for S/B mixtures was developed and different methods were assessed. They helped to evaluate and choose appropriate emplacement techniques and methodologies to achieve the target S/B dry density of 1.70 g/cm{sup 3}, which results in the desired intrinsic permeability throughout the experiment. The final QA methodology was targeted at engineering measures to decide if the work can proceed, and at producing high resolution material properties database for future water and gas transport modelling activities. The different applied QA techniques included standard core cutter tests, the application of neutron-gamma (Troxler) probes and two mass balance methods (2D and 3D). The methods, looking at different representative scales, have provided only slightly different results and showed that the average density of the emplaced S/B plug was between 1.65 and 1.73 g/cm{sup 3}. Spatial variability of dry densities was observed at decimeter scale. Overall, the pre-testing and QA programme performed for the GAST project demonstrated how the given design criteria and requirements can be met by appropriately planning and designing the material emplacement. (authors)« less

Fuel Crime Conceptualization through Specialization of Ontology for Investigation Management System

NASA Astrophysics Data System (ADS)

Cybulka, Jolanta

We undertook the task of building the conceptual model of a particular economic offense, called "a fuel crime". This model is thought of as a part of a larger conceptualization, which comprises consensual semantics underlying the knowledge base of a system, aimed at supporting the teamwork of investigators of economic crimes. Because such a knowledge-based system represents a perspective on economic crimes, it should be carefully modeled. This can be done with the help of an expressive enough ontology. To achieve our goal we use the constructive descriptions and situations (c.DnS) design pattern, which enables us to construct an extensible, layered ontology in a top-down manner: c.DnS top layer is specialized by the reference ontology for investigation management system, that in turn, is specialized by the ontology of the fuel crime.

"Wrapping Up" Your Construction Insurance.

ERIC Educational Resources Information Center

Ferraro, Mark

1998-01-01

School facility managers are beginning to use a special insurance-management technique called wrap-up. The project owner purchases a bulk construction insurance policy consisting of general liability, excess liability, workers' compensation, and builders' risk insurance. Wrap-ups ensure competitive pricing, safety incentives, lower claims costs,…

Conflict Resolution: Preparing Preservice Special Educators to Work in Collaborative Settings

ERIC Educational Resources Information Center

Bradley, Janetta Fleming; Monda-Amaya, Lisa E.

2005-01-01

Collaborative practice to provide effective programs for students with special needs and their families has increased with many positive results. But as this collaborative practice increases, so does the potential for conflict. Constructive conflict resolution occurs when disputants have knowledge and skills to produce positive outcomes, maintain…

A Sense of Autonomy in Young Children's Special Places

ERIC Educational Resources Information Center

Green, Carie

2013-01-01

Early childhood is a significant time when children begin to develop their place identity. As they discover their environment, young children claim special places in which to construct their own experiences. In exploring ways to connect children with place, particularly nature, caregivers need to consider children's place perspectives in the…

46 CFR 174.355 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SUBDIVISION AND STABILITY SPECIAL RULES PERTAINING TO SPECIFIC VESSEL TYPES Special Rules Pertaining to Dry Cargo Ships § 174.355 Definitions. New ship means a... absence of a contract, the construction work of which is begun on or after August 1, 1992; or (iii) Which...

Ethnic Minority Pupils in Swedish Schools: Some Trends in Over-Representation of Minority Pupils in Special Educational Programmes

ERIC Educational Resources Information Center

Berhanu, Girma

2008-01-01

The way categories, labels, and taxonomies are used depends upon national ideologies and nationally specific conceptions of citizenship and normality. Ethnicity, differences, disability and deviance are social constructions. Underachievement or overachievement in social (cognitive) performance or overrepresentation in special educational…

Reinventing Gerocounseling in Counselor Education as a Specialization

ERIC Educational Resources Information Center

Foster, Thomas; Kreider, Val

2009-01-01

Recent trends in counselor education are moving away from a standardized academic track in gerocounseling. We propose three types of academic models (integrated in-house, out-of-house, and combined) that provide greater academic freedom to counselor education faculty who wish to construct a gero-specialization specific in their program.

The Special Goods of Childhood: Lessons from Social Constructionism

ERIC Educational Resources Information Center

Giesinger, Johannes

2017-01-01

To what extent does the common claim that childhood is "socially constructed" affect the ethical debate on the "intrinsic" and "special" goods of childhood? Philosophers have referred to this kind of goods in their critique of overly adult-centred and future-oriented conceptions of childhood. The view that some goods…

Listing of Schools Constructed with a Building System. Building Systems Information Clearinghouse Special Report Number Two.

ERIC Educational Resources Information Center

Building Systems Information Clearinghouse, Menlo Park, CA.

To qualify for inclusion in this listing, a building must have been constructed with two or more compatible building subsystems, one of which is structure. It is estimated that at least 400 schools that satisfy this definition have been constructed in the U. S. and Canada, about one quarter of which appear in this listing. Beginning with this…

Scintillating anticoincidence detection elements design and tests with muons and protons

NASA Astrophysics Data System (ADS)

Gilliot, M.; Chabaud, J.; Baronick, J. P.; Colonges, S.; Laurent, P.

2010-09-01

Design, construction and tests of anticoincidence detection elements are presented. Initially planned to be used as active shielding parts of the anticoincidence detector of the Simbol-X mission, they are aimed to detect cosmic protons and provide veto signal against charged-particle background induced on imaging detectors. The sample is made of a scintillator plate into which grooves are machined and waveshifting fibers glued. The fibers are connected to multianode photomultiplier (PM) tubes. The tubes characteristics have been evaluated for this application. The device has been tested with atmospheric muons that deposit similar energy to that of cosmic protons thanks to a specially designed muon telescope also described in this paper. Tests have also been performed with protons of a tandem accelerator beam line. The response is on average above 10 photoelectrons, which is not complicated to detect, which allows very good detection efficiency as well as very good ability to reject noise. In addition many evolution and performance improvements appear possible.

Tests of shielding effectiveness of Kevlar and Nextel onboard the International Space Station and the Foton-M3 capsule.

PubMed

Pugliese, M; Bengin, V; Casolino, M; Roca, V; Zanini, A; Durante, M

2010-08-01

Radiation assessment and protection in space is the first step in planning future missions to the Moon and Mars, where mission and number of space travelers will increase and the protection of the geomagnetic shielding against the cosmic radiation will be absent. In this framework, the shielding effectiveness of two flexible materials, Kevlar and Nextel, were tested, which are largely used in the construction of spacecrafts. Accelerator-based tests clearly demonstrated that Kevlar is an excellent shield for heavy ions, close to polyethylene, whereas Nextel shows poor shielding characteristics. Measurements on flight performed onboard of the International Space Station and of the Foton-M3 capsule have been carried out with special attention to the neutron component; shielded and unshielded detectors (thermoluminescence dosemeters, bubble detectors) were exposed to a real radiation environment to test the shielding properties of the materials under study. The results indicate no significant effects of shielding, suggesting that thin shields in low-Earth Orbit have little effect on absorbed dose.

Safety and diagnostic systems on the Liquid Lithium Test Stand (LLTS)

NASA Astrophysics Data System (ADS)

Schwartz, J. A.; Jaworski, M. A.; Ellis, R.; Kaita, R.; Mozulay, R.

2013-10-01

The Liquid Lithium Test Stand (LLTS) is a test bed for development of flowing liquid lithium systems for plasma-facing components at PPPL. LLTS is designed to test operation of liquid lithium under vacuum, including flowing, solidifying (such as would be the case at the end of plasma operations), and re-melting. Constructed of stainless steel, LLTS is a closed loop of pipe with two reservoirs and a pump, as well as diagnostics for temperature, flow rate, and pressure. Since liquid lithium is a highly reactive material, special care must be taken when designing such a system. These include a permanent-magnet MHD pump and MHD flow meter that have no mechanical components in direct contact with the liquid lithium. The LLTS also includes an expandable 24-channel leak-detector interlock system which cuts power to heaters and the pump if any lithium leaks from a pipe joint. Design for the interlock systems and flow meter are presented. This work is supported by US DOE Contract DE-AC02-09CH11466.

Progress of a room temperature electron cyclotron resonance ion source using evaporative cooling technology at Institute of Modern Physics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, W., E-mail: luwang@impcas.ac.cn; University of Chinese Academy of Sciences, Beijing 100049; Xiong, B.

2014-02-15

A new room temperature ECR ion source, Lanzhou Electron Cyclotron Resonance ion source No. 4 (LECR4, previously named DRAGON), is under intense construction at Institute of Modern Physics. LECR4 is designed to operate with 18 GHz microwave frequency. The maximum axial magnetic fields are 2.3 T at injection and 1.3 T at extraction, and the radial field at the plasma chamber wall of 76 mm inner diameter is 1.0–1.2 T. One of the unique features for LECR4 is that its axial solenoids are winded with solid square copper wires which are immersed in a kind of special evaporative cooling mediummore » for cooling purpose. Till now, a prototype of the cooling system has been successfully constructed and tested, which has demonstrated that the cooling efficiency of the designed system could meet the requirements of LECR4 under the routine operation conditions. All the main components of the ion source have been completed. Assembly and commissioning is ongoing. The latest developments and test results will be presented in this paper.« less

Design, Construction, and Initial Test of High Spatial Resolution Thermometry Arrays for Detection of Surface Temperature Profiles on SRF Cavities in Super Fluid Helium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ari Palczewski, Rongli Geng, Grigory Eremeev

2011-07-01

We designed and built two high resolution (0.6-0.55mm special resolution [1.1-1.2mm separation]) thermometry arrays prototypes out of the Allen Bradley 90-120 ohm 1/8 watt resistor to measure surface temperature profiles on SRF cavities. One array was designed to be physically flexible and conform to any location on a SRF cavity; the other was modeled after the common G-10/stycast 2850 thermometer and designed to fit on the equator of an ILC (Tesla 1.3GHz) SRF cavity. We will discuss the advantages and disadvantages of each array and their construction. In addition we will present a case study of the arrays performance onmore » a real SRF cavity TB9NR001. TB9NR001 presented a unique opportunity to test the performance of each array as it contained a dual (4mm separation) cat eye defect which conventional methods such as OST (Oscillating Superleak second-sound Transducers) and full coverage thermometry mapping were unable to distinguish between. We will discuss the new arrays ability to distinguish between the two defects and their preheating performance.« less

26 CFR 1.861-10T - Special allocations of interest expense (temporary).

Code of Federal Regulations, 2010 CFR

2010-04-01

... certain assets that are acquired in integrated financial transaction. Paragraph (d) of this section... flow from the property. (ii) Self-constructed assets. The activities associated with self-construction... subtracting cash disbursements excluding debt service from cash receipts. (iv) Analysis of operating costs...

26 CFR 1.861-10T - Special allocations of interest expense (temporary).

Code of Federal Regulations, 2014 CFR

2014-04-01

... generated by certain assets that are acquired in integrated financial transaction. Paragraph (d) of this... flow from the property. (ii) Self-constructed assets. The activities associated with self-construction... subtracting cash disbursements excluding debt service from cash receipts. (iv) Analysis of operating costs...

26 CFR 1.861-10T - Special allocations of interest expense (temporary).

Code of Federal Regulations, 2011 CFR

2011-04-01

... generated by certain assets that are acquired in integrated financial transaction. Paragraph (d) of this... flow from the property. (ii) Self-constructed assets. The activities associated with self-construction... subtracting cash disbursements excluding debt service from cash receipts. (iv) Analysis of operating costs...

26 CFR 1.861-10T - Special allocations of interest expense (temporary).

Code of Federal Regulations, 2013 CFR

2013-04-01

... generated by certain assets that are acquired in integrated financial transaction. Paragraph (d) of this... flow from the property. (ii) Self-constructed assets. The activities associated with self-construction... subtracting cash disbursements excluding debt service from cash receipts. (iv) Analysis of operating costs...

26 CFR 1.861-10T - Special allocations of interest expense (temporary).

Code of Federal Regulations, 2012 CFR

2012-04-01

... generated by certain assets that are acquired in integrated financial transaction. Paragraph (d) of this... flow from the property. (ii) Self-constructed assets. The activities associated with self-construction... subtracting cash disbursements excluding debt service from cash receipts. (iv) Analysis of operating costs...

Sustainable Design of EPA's Campus in Research Triangle Park, NC—Environmental Performance Specifications in Construction Contracts—Section 01450 Sequence of Finishes Installation

EPA Pesticide Factsheets

Learn more about the special construction scheduling/sequencing requirements and procedures necessary to assure achievement of designed Indoor Air Quality (IAQ) levels for the completed project required by the EPA IAQ Program.

Two-course bonded concrete bridge deck construction : condition and performance after six years.

DOT National Transportation Integrated Search

1981-01-01

This report presents the findings from a six-year study of two-course bonded concrete bridge decks constructed in Virginia. Each of three special portland cement concretes was applied as an overlay, or wearing course, on two experimental spans. The o...

22 CFR 228.39 - Special source rules for construction and engineering services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... engineering services. 228.39 Section 228.39 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT RULES ON... engineering services. Advanced developing countries, eligible under Geographic Code 941, which have attained a competitive capability in international markets for construction services or engineering services are not...

22 CFR 228.39 - Special source rules for construction and engineering services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... engineering services. 228.39 Section 228.39 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT RULES ON... engineering services. Advanced developing countries, eligible under Geographic Code 941, which have attained a competitive capability in international markets for construction services or engineering services are not...

2. Photographic copy of original construction drawings, dated 30 September ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. Photographic copy of original construction drawings, dated 30 September 1930, located at the John Gaw Meem Archive of Southwestern Architecture, Special Collections, University of New Mexico, Albuquerque, New Mexico. FIRST FLOOR PLAN. - St. Anthony's Orphanage, 1500 Indian School Road, Northwest, Albuquerque, Bernalillo County, NM

Construction Trades Resources.

ERIC Educational Resources Information Center

Alaska State Dept. of Education, Juneau. Div. of Adult and Vocational Education.

This guide was developed as a supplement to the Alaska Department of Education's Construction Trades Curriculum. The special topics included in it focus on competencies from the curriculum for which materials were not readily available to Alaskan teachers and provide information that is either required by Alaska's environmental conditions or is…

A Linguistics Course on International Communication and Constructed Languages.

ERIC Educational Resources Information Center

Sherwood, Bruce Arne; Cheng, Chin-Chuan

A course on international communication and constructed languages is described. General topics covered in the course included the roles various national languages have played in international communication, special forms of English, language practices and policies in international organizations and conferences, and the history and classification…

Low-smoke, halogenfree ship-offshore/onshore cables with improved flame retardance and fire resistance

NASA Astrophysics Data System (ADS)

Pedersen, J. R.; Holte, T. A.; Johansen, E.

Cables with improved fire resistance and flame retardance have been developed. They will continue to function at least 3 hours even at temperatures up to 1000 C and do not propagate fire when tested according to IEC 332 part 3 1982, category A. Made with halogenfree materials they give off no corrosive gases and very little visible smoke in cases of fire. Cables are made for power, signal and instrument installations in hospitals, high rise buildings, railroad cars, subways, on board ship, oil rigs and oil production platforms. The offshore cables are specially constructed to withstand the rugged climatic conditions in the North Sea area.

Analytical and experimental investigation of liquid double drop dynamics: Preliminary design for space shuttle experiments

NASA Technical Reports Server (NTRS)

1981-01-01

The preliminary grant assessed the use of laboratory experiments for simulating low g liquid drop experiments in the space shuttle environment. Investigations were begun of appropriate immiscible liquid systems, design of experimental apparatus and analyses. The current grant continued these topics, completed construction and preliminary testing of the experimental apparatus, and performed experiments on single and compound liquid drops. A continuing assessment of laboratory capabilities, and the interests of project personnel and available collaborators, led to, after consultations with NASA personnel, a research emphasis specializing on compound drops consisting of hollow plastic or elastic spheroids filled with liquids.

The cetene scale and the induction period preceding the spontaneous ignition of diesel fuels in bombs

NASA Technical Reports Server (NTRS)

Michailova, M N; Neumann, M B

1936-01-01

In the present report a comparison is made between the scale obtained with mixtures of cetane and l-methyl naphthalene in a bomb, and that obtained with the same fuels in a Waukesha engine. The tests were conducted in a metal bomb heated by a Nichrome spiral. The fuel was injected into the bomb from a Bosch jet by means of a specially constructed plunger pump. The instant injection and the pressure curve in the bomb were registered by a beam of light which was reflected from a mirror connected to the needle of the jet and to a membrane indicator.

Adaptive wavelet collocation methods for initial value boundary problems of nonlinear PDE's

NASA Technical Reports Server (NTRS)

Cai, Wei; Wang, Jian-Zhong

1993-01-01

We have designed a cubic spline wavelet decomposition for the Sobolev space H(sup 2)(sub 0)(I) where I is a bounded interval. Based on a special 'point-wise orthogonality' of the wavelet basis functions, a fast Discrete Wavelet Transform (DWT) is constructed. This DWT transform will map discrete samples of a function to its wavelet expansion coefficients in O(N log N) operations. Using this transform, we propose a collocation method for the initial value boundary problem of nonlinear PDE's. Then, we test the efficiency of the DWT transform and apply the collocation method to solve linear and nonlinear PDE's.

Seismic and source characteristics of large chemical explosions. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adushkin, V.V.; Kostuchenko, V.N.; Pernik, L.M.

From the very beginning of its arrangement in 1947, the Institute for Dynamics of the Geospheres RAS (former Special Sector of the Institute for physics of the Earth, RAS) was providing scientific observations of effects of nuclear explosions, as well as large-scale detonations of HE, on environment. This report presents principal results of instrumental observations obtained from various large-scale chemical explosions conducted in the Former-Soviet Union in the period of time from 1957 to 1989. Considering principal aim of the work, tamped and equivalent chemical explosions have been selected with total weights from several hundreds to several thousands ton. Inmore » particular, the selected explosions were aimed to study scaling law from excavation explosions, seismic effect of tamped explosions, and for dam construction for hydropower stations and soil melioration. Instrumental data on surface explosions of total weight in the same range aimed to test military technics and special objects are not included.« less

Introduction to the Special Series: Current Directions for Measuring Parenting Constructs to Inform Prevention Science.

PubMed

Lindhiem, Oliver; Shaffer, Anne

2017-04-01

Parenting behaviors are multifaceted and dynamic and therefore challenging to quantify. Measurement methods have critical implications for study results, particularly for prevention trials designed to modify parenting behaviors. Although multiple approaches can complement one another and contribute to a more complete understanding of prevention trials, the assumptions and implications of each approach are not always clearly addressed. Greater attention to the measurement of complex constructs such as parenting is needed to advance the field of prevention science. This series examines the challenges of measuring changes in parenting behaviors in the context of prevention trials. All manuscripts in the special series address measurement issues and make practical recommendations for prevention researchers. Manuscripts in this special series include (1) empirical studies that demonstrate novel measurement approaches, (2) re-analyses of prevention trial outcome data directly comparing and contrasting two or more methods, and (3) a statistical primer and practical guide to analyzing proportion data.

Scavenging a Piston-ported Two-stroke Cylinder

NASA Technical Reports Server (NTRS)

Rogowski, A R; Bouchard, C L

1938-01-01

An investigation was made with a specially designed engine to determine the scavenging characteristics of a large number of inlet-port shapes and arrangements and the optimum port arrangement and timing for this particular type of engine. A special cylinder construction permitted wide variations in timing for this particular type of engine. A special cylinder construction permitted wide variations in timing as well as in shape and arrangement of both the inlet and exhaust ports. The study of the effect of port shape combinations and timings on engine performance was made using illuminating gas as a fuel. Through variations in inlet-port arrangement and port timings, the value of the scavenging efficiency was increased from an original 44 percent to approximately 67 percent with a corresponding increase in power. With the optimum port arrangement and timing determined, a large number of performance runs were made under both spark-ignition and compression-ignition operation.

Construction aggregates

USGS Publications Warehouse

Tepordei, V.V.

1993-01-01

Part of a special section on the market performance of industrial minerals in 1992. Production of construction aggregates increased by 4.6 percent in 1992. This increase was due, in part, to the increased funding for transportation and infrastructure projects. The U.S. produced about 1.05 Gt of crushed stone and an estimated 734 Mt of construction sand and gravel in 1992. Demand is expected to increase by about 5 percent in 1993.

Who Benefits from Special Education? Remediating (Fixing) Other People's Children. Studies in Curriculum Theory Series

ERIC Educational Resources Information Center

Brantlinger, Ellen, Ed.

2006-01-01

This book addresses the negative consequences of labeling and separating education for students with "disabilities," the cultural biases inherent in the way that we view children's learning difficulties, the social construction of disability, the commercialization of special education, and related issues. The theme that unifies the chapters is…

Stories of Hope and Decline: Interest Group Effectiveness in National Special Education Policy

ERIC Educational Resources Information Center

Itkonen, Tiina

2009-01-01

This study analyzes parent and professional organizations' effectiveness in national special education policy from 1975 to the present. Of specific interest are the relationships between groups' policy victories, how groups construct their political messages, and organizational characteristics. The research is significant in that it is one of the…

14 CFR Special Federal Aviation... - Construction or Alteration in the Vicinity of the Private Residence of the President of the...

Code of Federal Regulations, 2010 CFR

2010-01-01

... presumed to adversely affect aviation safety and therefore is a hazard to air navigation. (b) A... of the Private Residence of the President of the United States Federal Special Federal Aviation Regulation No. 98 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION...

Highly efficient special sound absorbing solutions

NASA Technical Reports Server (NTRS)

Ionescu, M.; Petre-Lazar, S.

1974-01-01

Highly efficient special sound absorbing structures with the following criteria are considered: (1) A distribution surface of the sound absorbing material greater than that of the building element on which the structure is placed; (2) The highest possible absorption coefficient in the widest possible frequency band; and (3) adaptability to different construction and aesthetic conditions.

Mathematical Learning Disabilities in Special Populations: Phenotypic Variation and Cross-Disorder Comparisons

ERIC Educational Resources Information Center

Dennis, Maureen; Berch, Daniel B.; Mazzocco, Michele M. M.

2009-01-01

What is mathematical learning disability (MLD)? The reviews in this special issue adopt different approaches to defining the construct of MLD. Collectively, they demonstrate the current status of efforts to establish a consensus definition and the challenges faced in this endeavor. In this commentary, we reflect upon the proposed pathways to…

Using Symbolic Interactionism to Analyze a Specialized STEM High School Teacher's Experience in Curriculum Reform

ERIC Educational Resources Information Center

Teo, Tang Wee; Osborne, Margery

2012-01-01

In this paper, we present a microanalysis of a specialized STEM (science, technology, engineering, and mathematics) high school teacher's experience of self-initiated science inquiry curriculum reform. We examine the meanings of these two constructs: "inquiry curriculum" and "curriculum change" through the process lens of interactions, actions,…

48 CFR 252.239-7011 - Special construction and equipment charges.

Code of Federal Regulations, 2010 CFR

2010-10-01

... this clause, the Government shall have the right to terminate the service under the Cancellation or...) The Government will not directly reimburse the Contractor for the cost of constructing any facilities... the Contractor stops using facilities or equipment which the Government has, in whole or part...

48 CFR 236.271 - Cost-plus-fixed-fee contracts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Cost-plus-fixed-fee... CONTRACTS Special Aspects of Contracting for Construction 236.271 Cost-plus-fixed-fee contracts. Annual military construction appropriations acts restrict the use of cost-plus-fixed-fee contracts (see 216.306(c...

Energy Conservation in Construction Trades. Special Packages: Instructional Resources for Vocational Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

Designed for secondary and postsecondary vocational teachers and administrators, this resource package on energy conservation in construction trades contains three sections of information. Section I provides an instructional module (developed by the Wisconsin Vocational Studies Center) on solar energy; the module is organized into seven units:…

36 CFR 223.62 - Timber purchaser road construction credit.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Timber purchaser road construction credit. 223.62 Section 223.62 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.62 - Timber purchaser road construction credit.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Timber purchaser road construction credit. 223.62 Section 223.62 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.38 - Standards for road design and construction.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Standards for road design and construction. 223.38 Section 223.38 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.62 - Timber purchaser road construction credit.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Timber purchaser road construction credit. 223.62 Section 223.62 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.62 - Timber purchaser road construction credit.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Timber purchaser road construction credit. 223.62 Section 223.62 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.38 - Standards for road design and construction.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Standards for road design and construction. 223.38 Section 223.38 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

47 CFR 101.527 - Construction requirements for 24 GHz operations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... it. (d) The frequencies associated with incumbent authorizations, licensed on a SMSA basis, that have... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES 24 GHz Service and Digital Electronic Message Service § 101.527 Construction requirements for 24 GHz operations. (a) Each licensee must make a showing of...

47 CFR 101.527 - Construction requirements for 24 GHz operations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... it. (d) The frequencies associated with incumbent authorizations, licensed on a SMSA basis, that have... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES 24 GHz Service and Digital Electronic Message Service § 101.527 Construction requirements for 24 GHz operations. (a) Each licensee must make a showing of...

47 CFR 101.527 - Construction requirements for 24 GHz operations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... it. (d) The frequencies associated with incumbent authorizations, licensed on a SMSA basis, that have... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES 24 GHz Service and Digital Electronic Message Service § 101.527 Construction requirements for 24 GHz operations. (a) Each licensee must make a showing of...

47 CFR 101.527 - Construction requirements for 24 GHz operations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... it. (d) The frequencies associated with incumbent authorizations, licensed on a SMSA basis, that have... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES 24 GHz Service and Digital Electronic Message Service § 101.527 Construction requirements for 24 GHz operations. (a) Each licensee must make a showing of...

47 CFR 101.527 - Construction requirements for 24 GHz operations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... it. (d) The frequencies associated with incumbent authorizations, licensed on a SMSA basis, that have... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES 24 GHz Service and Digital Electronic Message Service § 101.527 Construction requirements for 24 GHz operations. (a) Each licensee must make a showing of...

SOME PROBLEMS IN THE CONSTRUCTION OF AN ELECTRON LINEAR ACCELERATOR (in Dutch)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Verhaeghe, J.; Vanhuyse, V.; Van Leuven, P.

1959-01-01

Special problems encountered in the construction of the electron linear accelerator of the Natuurkundig Laboratorium der Rijksuniversiteit of Ghent are discussed. The subjects considered are magnetic focusing, magnetic screening of the electron gun cathode, abnormal attenuation-multipactor effects, and electron energy control. (J.S.R.)

46 CFR 190.07-10 - Construction.

Code of Federal Regulations, 2010 CFR

2010-10-01

... use of other suitable material in special cases, having in mind the risk of fire. (b) The boundary... bulkheads and decks separating the accomodations and control stations from hold and machinery spaces... square feet or less from accommodations and control stations shall be of “A-15” Class construction as...

The use of a task-based exposure assessment model (T-BEAM) for assessment of metal fume exposures during welding and thermal cutting.

PubMed

Susi, P; Goldberg, M; Barnes, P; Stafford, E

2000-01-01

Elevated disease rates have been documented among construction workers for cancer, pneumonoconiosis, asbestosis, and silicosis. However, methodologies for exposure assessment in construction are not well described in the U.S. literature. Working through a cooperative agreement with the National Institute for Occupational Safety and Health (NIOSH), the Center to Protect Workers' Rights--a research arm of the Building and Construction Trades Department, AFL-CIO--has developed and used a "Task-Based Exposure Assessment Model (T-BEAM)" for construction. The characteristic elements of T-BEAM are: (1) an emphasis on the identification, implementation, and evaluation of engineering and work practice controls; and (2) use of experienced, specially trained construction workers (construction safety and health specialists) in the exposure assessment process. A task-based approach was used because tasks, or specialized skills, form the single greatest thread of continuity in the dynamic environment of construction. Workers in the construction industry come from several crafts and are typically employed by a large number of contractors throughout their career. Project types (e.g., residential or industrial rehabilitation) are also highly variable and present unique health risks. Finally, because construction involves building, renovating, or dismantling physical surroundings, the work site is constantly changing. Between 1995 and 1996, T-BEAM was applied to the collection of approximately 200 personal exposure measurements associated with "hot work tasks"--welding and thermal cutting. Data were collected with the assistance of specially trained, journeyman ironworkers, pipe fitters, and boilermakers on nine construction sites located throughout the United States. Portable local exhaust ventilation was provided to participating contractors with the intent of measuring its impact on exposure. Results indicate that data collected in a standardized, systematic fashion from multiple work sites can be used to characterize exposures among sampled trades. Comparison of results to American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit values (TLVs) demonstrate a significant health hazard among sampled trades posed by welding and thermal cutting fume, manganese, nickel, and chromium VI. Direct estimates of the probability of exceeding the ACGIH TLV for respirable particulate suggests that boilermakers (100%) and ironworkers (71%) are at greatest risk. Other task variables evaluated with respect to exposure include task, whether work was performed indoors or outdoors, intermittency of work, and use of ventilation. Use of local or mechanical ventilation reduced mean exposures to fumes significantly.

An AI-based communication system for motor and speech disabled persons: design methodology and prototype testing.

PubMed

Sy, B K; Deller, J R

1989-05-01

An intelligent communication device is developed to assist the nonverbal, motor disabled in the generation of written and spoken messages. The device is centered on a knowledge base of the grammatical rules and message elements. A "belief" reasoning scheme based on both the information from external sources and the embedded knowledge is used to optimize the process of message search. The search for the message elements is conceptualized as a path search in the language graph, and a special frame architecture is used to construct and to partition the graph. Bayesian "belief" reasoning from the Dempster-Shafer theory of evidence is augmented to cope with time-varying evidence. An "information fusion" strategy is also introduced to integrate various forms of external information. Experimental testing of the prototype system is discussed.

Structural adaptations to diverse fighting styles in sexually selected weapons

PubMed Central

McCullough, Erin L.; Tobalske, Bret W.; Emlen, Douglas J.

2014-01-01

The shapes of sexually selected weapons differ widely among species, but the drivers of this diversity remain poorly understood. Existing explanations suggest weapon shapes reflect structural adaptations to different fighting styles, yet explicit tests of this hypothesis are lacking. We constructed finite element models of the horns of different rhinoceros beetle species to test whether functional specializations for increased performance under species-specific fighting styles could have contributed to the diversification of weapon form. We find that horns are both stronger and stiffer in response to species-typical fighting loads and that they perform more poorly under atypical fighting loads, which suggests weapons are structurally adapted to meet the functional demands of fighting. Our research establishes a critical link between weapon form and function, revealing one way male–male competition can drive the diversification of animal weapons. PMID:25201949

Structural adaptations to diverse fighting styles in sexually selected weapons.

PubMed

McCullough, Erin L; Tobalske, Bret W; Emlen, Douglas J

2014-10-07

The shapes of sexually selected weapons differ widely among species, but the drivers of this diversity remain poorly understood. Existing explanations suggest weapon shapes reflect structural adaptations to different fighting styles, yet explicit tests of this hypothesis are lacking. We constructed finite element models of the horns of different rhinoceros beetle species to test whether functional specializations for increased performance under species-specific fighting styles could have contributed to the diversification of weapon form. We find that horns are both stronger and stiffer in response to species-typical fighting loads and that they perform more poorly under atypical fighting loads, which suggests weapons are structurally adapted to meet the functional demands of fighting. Our research establishes a critical link between weapon form and function, revealing one way male-male competition can drive the diversification of animal weapons.

Development of a Dew-Point Generator for Gases Other than Air and Nitrogen and Pressures up to 6 MPa

NASA Astrophysics Data System (ADS)

Bosma, R.; Peruzzi, A.

2012-09-01

A new primary humidity standard is currently being developed at VSL that, in addition to ordinary operation with air and nitrogen at atmospheric pressure, can be operated also with special carrier gases such as natural gas and SF6 and at pressures up to 6 MPa. In this paper, the design and construction of this new primary dew-point generator and the preliminary tests performed on the generator are reported. The results of the first efficiency tests, performed for the dew-point temperature range from -50 °C to 20°C, for pressures up to 0.7MPa and for carrier gas flow rates up to 4L· min-1, showed satisfactory generator performance when used in the single-pass mode, i.e., with no recirculation of the carrier gas.

Satellite power systems (SPS) concept definition study. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1980-01-01

System definition studies resulted in a further definition of the reference system using gallium arsenide solar arrays, analysis of alternative subsystem options for the reference concept, preliminary solid state microwave concept studies, and an environmental analysis of laser transmission systems. The special emphasis studies concentrated on satellite construction, satellite construction base definition, satellite construction base construction, and rectenna construction. Major emphasis in the transportation studies was put on definition of a two stage parallel burn, vertical takeoff/horizontal landing concept. The electric orbit transfer vehicle was defined in greater detail. Program definition included cost analyses and schedule definition.

Likelihood Ratio Tests for Special Rasch Models

ERIC Educational Resources Information Center

Hessen, David J.

2010-01-01

In this article, a general class of special Rasch models for dichotomous item scores is considered. Although Andersen's likelihood ratio test can be used to test whether a Rasch model fits to the data, the test does not differentiate between special Rasch models. Therefore, in this article, new likelihood ratio tests are proposed for testing…

Parametric and cycle tests of a 40-A-hr bipolar nickel-hydrogen battery

NASA Technical Reports Server (NTRS)

Cataldo, R. L.

1986-01-01

A series of tests was performed to characterize battery performance relating to certain operating parameters which included charge current, discharge current, temperature and pressure. The parameters were varied to confirm battery design concepts and to determine optimal operating conditions. Spacecraft power requirements are constantly increasing. Special spacecraft such as the Space Station and platforms will require energy storage systems of 130 and 25 kWh, respectively. The complexity of these high power systems will demand high reliability, and reduced mass and volume. A system that uses batteries for storage will require a cell count in excess of 400 units. These cell units must then be assembled into several batteries with over 100 cells in a series connected string. In an attempt to simplify the construction of conventional cells and batteries, the NASA Lewis Research Center battery systems group initiated work on a nickel-hydrogen battery in a bipolar configuration in early 1981. Features of the battery with this bipolar construction show promise in improving both volumetric and gravimetric energy densities as well as thermal management. Bipolar construction allows cooling in closer proximity to the cell components, thus heat removal can be accomplished at a higher rejection temperature than conventional cell designs. Also, higher current densities are achievable because of low cell impedance. Lower cell impedance is achieved via current flow perpendicular to the electrode face, thus reducing voltage drops in the electrode grid and electrode terminals tabs.

Constructing Aligned Assessments Using Automated Test Construction

ERIC Educational Resources Information Center

Porter, Andrew; Polikoff, Morgan S.; Barghaus, Katherine M.; Yang, Rui

2013-01-01

We describe an innovative automated test construction algorithm for building aligned achievement tests. By incorporating the algorithm into the test construction process, along with other test construction procedures for building reliable and unbiased assessments, the result is much more valid tests than result from current test construction…

Addressing EO-1 Spacecraft Pulsed Plasma Thruster EMI Concerns

NASA Technical Reports Server (NTRS)

Zakrzwski, C. M.; Davis, Mitch; Sarmiento, Charles; Bauer, Frank H. (Technical Monitor)

2001-01-01

The Pulsed Plasma Thruster (PPT) Experiment on the Earth Observing One (EO-1) spacecraft has been designed to demonstrate the capability of a new generation PPT to perform spacecraft attitude control. Results from PPT unit level radiated electromagnetic interference (EMI) tests led to concerns about potential interference problems with other spacecraft subsystems. Initial plans to address these concerns included firing the PPT at the spacecraft level both in atmosphere, with special ground support equipment. and in vacuum. During the spacecraft level tests, additional concerns where raised about potential harm to the Advanced Land Imager (ALI). The inadequacy of standard radiated emission test protocol to address pulsed electromagnetic discharges and the lack of resources required to perform compatibility tests between the PPT and an ALI test unit led to changes in the spacecraft level validation plan. An EMI shield box for the PPT was constructed and validated for spacecraft level ambient testing. Spacecraft level vacuum tests of the PPT were deleted. Implementation of the shield box allowed for successful spacecraft level testing of the PPT while eliminating any risk to the ALI. The ALI demonstration will precede the PPT demonstration to eliminate any possible risk of damage of ALI from PPT operation.

The Full Scale Seal Experiment - A Seal Industrial Prototype for Cigeo - 13106

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lebon, P.; Bosgiraud, J.M.; Foin, R.

2013-07-01

The Full Scale Seal (FSS) Experiment is one of various experiments implemented by Andra, within the frame of the Cigeo (the French Deep Geological Repository) Project development, to demonstrate the technical construction feasibility and performance of seals to be constructed, at time of Repository components (shafts, ramps, drifts, disposal vaults) progressive closure. FSS is built inside a drift model fabricated on surface for the purpose. Prior to the scale 1:1 seal construction test, various design tasks are scheduled. They include the engineering work on the drift model to make it fit with the experimental needs, on the various work sequencesmore » anticipated for the swelling clay core emplacement and the concrete containment plugs construction, on the specialized handling tools (and installation equipment) manufactured and delivered for the purpose, and of course on the various swelling clay materials and low pH (below 11) concrete formulations developed for the application. The engineering of the 'seal-as-built' commissioning means (tools and methodology) must also be dealt with. The FSS construction experiment is a technological demonstrator, thus it is not focused on the phenomenological survey (and by consequence, on the performance and behaviour forecast). As such, no hydration (forced or natural) is planned. However, the FSS implementation (in particular via the construction and commissioning activities carried out) is a key milestone in view of comforting phenomenological extrapolation in time and scale. The FSS experiment also allows for qualifying the commissioning methods of a real sealing system in the Repository, as built, at time of industrial operations. (authors)« less

An introduction to niche construction theory.

PubMed

Laland, Kevin; Matthews, Blake; Feldman, Marcus W

Niche construction refers to the modification of selective environments by organisms. Theoretical and empirical studies of niche construction are increasing in importance as foci in evolutionary ecology. This special edition presents theoretical and empirical research that illustrates the significance of niche construction to the field. Here we set the scene for the following papers by (1) discussing the history of niche construction research, (2) providing clear definitions that distinguish niche construction from related concepts such as ecosystem engineering and the extended phenotype, (3) providing a brief summary of the findings of niche construction research, (4) discussing the contribution of niche construction and ecological inheritance to (a) expanded notions of inheritance, and (b) the extended evolutionary synthesis, and (5) briefly touching on some of the issues that underlie the controversies over niche construction.

Security during the Construction of New Nuclear Power Plants: Technical Basis for Access Authorization and Fitness-For-Duty Requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Branch, Kristi M.; Baker, Kathryn A.

A technical letter report to the NRC summarizing the findings of a benchmarking study, literature review, and workshop with experts on current industry standards and expert judgments about needs for security during the construction phase of critical infrastructure facilities in the post-September 11 U.S. context, with a special focus on the construction phase of nuclear power plants and personnel security measures.

United States Special Operations Command (USSOCOM): Construction Management Handbook

DTIC Science & Technology

2010-02-11

installation B-Hut Road Work Sea-Hut Water Well and Pump House Brick and Mortar billets D. Oversight Program Oversight of contracts is critical to the...often asked to fulfill construction requirements in austere locations with little or no training in construction terminology, concepts, and protocols...contracting arm of SOAL is the Director of Procurement (also known as SOAL-K), located within the USSOCOM Headquarters on MacDill AFB, Florida. SOAL-K

The Organizations and Functions of Documentation and Information Centres in Defence and Aerospace Environments

DTIC Science & Technology

1988-10-20

express my sincere gratitude to Mrs. D. Patrinou, of the Hellenic Aerospace Industry, for her valuable and constructive comments during the preparation of...cognitive awareness, we get closer to constructing the elusive user model. 3-7 REFERENCES 1 Ziman, J. Knowing everything about nothing: specialization and...Collection, with information from 18 abstract journals - the Construction Criteria Base. with over 50,000 pages of guide specifications and standards

Public Law 94-103: 94th Congress, H.R. 4005, October 4, 1975. An Act to Amend the Developmental Disabilities Services and Facilities Construction Act to Revise and Extend the Programs Authorized by that Act.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate.

Presented is the 1975 amendment to the Developmental Disabilities Services and Facilities Construction Act. Described are revisions and extensions of the earlier act, including revision of grant and construction assistance for university affiliated facilities, and revision of special projects assistance. The earlier act's designation of rights of…

Modelling of energy consumption at construction of high-rise buildings

NASA Astrophysics Data System (ADS)

Korol, Elena; Korol, Oleg

2018-03-01

High-rise building structures in the course of its erection suppose primary use of methods provided for erection, concrete and external finishing works. Erection works do not differ significantly from usual ones: traditional equipment, accessories and techniques are used which are based on erection of structures in project position using a crane. Structures to be assembled in building frame include steel columns and beams, wall panels, form elements of columns, walls and floor structures. We can note heightened attention to operational control for quality of erection, but it is attributable to all works in the course of high-rise construction. During high-rise erection by means of cast in-situ reinforced concrete all formworks to be used do not have any special differences except systems specially designed for high-rise erection using sliding formwork or vertical traveling forms. In these systems special attention is paid to safety of elevated works. Working methods of placement and curing of concrete and structures as a whole remain traditional - the requirements for controlling such operations become toughened. The most evident differences in high-rise erection with regard to equipment, machinery and accessories used are in means provided for load transportation and safety of works at heights. Particularity of internal finishing works which are also obligatory during construction of skyscrapers allows not considering them in as technological differences from usual construction as far as the «height» of its execution is limited by height of particular floor and determined by price and building class.

Adaptive graph-based multiple testing procedures

PubMed Central

Klinglmueller, Florian; Posch, Martin; Koenig, Franz

2016-01-01

Multiple testing procedures defined by directed, weighted graphs have recently been proposed as an intuitive visual tool for constructing multiple testing strategies that reflect the often complex contextual relations between hypotheses in clinical trials. Many well-known sequentially rejective tests, such as (parallel) gatekeeping tests or hierarchical testing procedures are special cases of the graph based tests. We generalize these graph-based multiple testing procedures to adaptive trial designs with an interim analysis. These designs permit mid-trial design modifications based on unblinded interim data as well as external information, while providing strong family wise error rate control. To maintain the familywise error rate, it is not required to prespecify the adaption rule in detail. Because the adaptive test does not require knowledge of the multivariate distribution of test statistics, it is applicable in a wide range of scenarios including trials with multiple treatment comparisons, endpoints or subgroups, or combinations thereof. Examples of adaptations are dropping of treatment arms, selection of subpopulations, and sample size reassessment. If, in the interim analysis, it is decided to continue the trial as planned, the adaptive test reduces to the originally planned multiple testing procedure. Only if adaptations are actually implemented, an adjusted test needs to be applied. The procedure is illustrated with a case study and its operating characteristics are investigated by simulations. PMID:25319733

Dissipation, Voltage Profile and Levy Dragon in a Special Ladder Network

ERIC Educational Resources Information Center

Ucak, C.

2009-01-01

A ladder network constructed by an elementary two-terminal network consisting of a parallel resistor-inductor block in series with a parallel resistor-capacitor block sometimes is said to have a non-dispersive dissipative response. This special ladder network is created iteratively by replacing the elementary two-terminal network in place of the…

Geometric Constructions for Image Formation by a Converging Lens

ERIC Educational Resources Information Center

Zurcher, Ulrich

2012-01-01

Light rays emerge from an object in all directions. In introductory texts, three "special" rays are selected to draw the image produced by lenses and mirrors. This presentation may suggest to students that these three rays are necessary for the formation of an image. We discuss that the three rays attain their "special status" from the geometric…

Efficacy Beliefs of Special Educators: The Relationships among Collective Efficacy, Teacher Self-Efficacy, and Job Satisfaction

ERIC Educational Resources Information Center

Viel-Ruma, Kim; Houchins, David; Jolivette, Kristine; Benson, Gwen

2010-01-01

In order to examine the relationship between reported levels of teacher self-efficacy, collective efficacy, and job satisfaction in special educators, teachers in one school district completed three surveys measuring these constructs. The results indicated that teacher self-efficacy had a direct effect on job satisfaction. It was further found…

[Experience of the development special medical technical laboratory for studies of effects caused by potent electromagnetic radiation in biologic objects].

PubMed

Gorodetsky, B N; Kalyada, T V; Petrov, S V

2015-01-01

This article covers topics of creating special medical technical laboratory for medial and biologic studies concerning influence of potent high-frequency elecromagnetic radiation on various biologic objects. The authors gave example of such laboratory, described its construction features, purpose and main characteristics of the included devices.

ICT and Knowledge Construction: Towards New Features for the Socio-Technical Approach

ERIC Educational Resources Information Center

Cartelli, Antonio

2007-01-01

Purpose: The purpose of this paper is to provide an analysis and review of the sociotechnical approach as a result of analysis of experiences with the introduction of ICT in higher education. Design/methodology/approach: The experiences of the author with the creation of special web sites in palaeography are analysed paying special attention to…

78 FR 61002 - Loan Guaranty: Assistance to Eligible Individuals in Acquiring Specially Adapted Housing; Cost-of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

... Specially Adapted Housing; Cost-of-Construction Index AGENCY: Department of Veterans Affairs. ACTION: Notice... index. The Secretary uses the Turner Building Cost Index for this purpose. In the most recent quarter for which the Turner Building Cost Index is available, Quarter 2 FY 2013, the index showed an increase...

A Preservice Special Education Teacher's Construction of Knowledge: Implications for Coursework and Retention in the Field

ERIC Educational Resources Information Center

Morewood, Aimee; Condo, Amy

2012-01-01

This case study looks closely at one preservice special education teacher candidate's views on how her coursework, program requirements, and practical experiences influenced her knowledge of teaching. Her perspectives are examined through the research-based frameworks of Hanline (2010), Shulman (1986), and Cochran-Smith and Lytle (1999). These…

The "Why" of Who We Are: Exploring the "Culture of Practice" of Ministry of Education, Special Education Occupational Therapists and Physiotherapists

ERIC Educational Resources Information Center

Simmons Carlsson, Carolyn; Hocking, Clare; Wright-St Clair, Valerie

2007-01-01

This qualitative study sought to describe the shared "culture of practice" of a group of Ministry of Education, Special Education occupational therapists and physiotherapists. Data from individual semi-structured interviews, enriched by insider observations, were thematically analysed within a cultural constructs framework. An ethos of…

The Present Status of Airship Construction, Especially of Airship-framing Construction

NASA Technical Reports Server (NTRS)

Ebner, Hans

1938-01-01

This work proposes to sketch, in broad outline, the status of airship construction in the various countries, at a time when commerce over great distances might be finally opened up to the airship through the performances of the "Graf Zeppelin." After a short historical review, a survey of the most important rigid and semirigid airships built since 1925, their differences and special problems, is made. In more detailed treatment, the framing construction of the more recent rigid airships and some especially interesting structural questions are investigated.

High reliability sheathed, beryllia insulated, tungsten-rhenium alloy thermocouple assemblies; their fabrication and EMF stability

NASA Technical Reports Server (NTRS)

Burns, G. W.; Hurst, W. S.; Scroger, M. G.

1974-01-01

Tantalum sheathed, BeO insulated, W-3% Re/W-25% Re thermocouple assemblies were fabricated and their emf drift determined during 2059 hours of exposure at 2073 K in a gaseous helium environment. The sheathed thermocouple assemblies were constructed from aged thermoelements, specially heat-treated BeO insulators, and specially cleaned and etched tantalum sheaths. Their thermal emf drifts ranged from the equivalent of only -0.3 to -0.8 K drift per 1000 hours of exposure at 2073 K. No evidence of any gross chemical attack or degradation of the component materials was found. The emf drift and material behavior of some unsheathed, BeO insulated, W-3% Re/W-25% Re thermocouples at 2250 and 2400 K were also determined. Unsheathed thermocouples tested in an argon environment at 2250 K for 1100 hours and at 2400 K for 307 hours exhibited changes in thermal emf that typically ranged from the equivalent of a few degrees K to as much as +11 K. Post-test examinations of these thermocouples revealed some undesirable material degradation and interaction which included erosion of the BeO insulators and contamination of the thermoelements by tantalum from the tantalum blackbody enclosure in which the thermocouples were contained.

46 CFR 32.40-15 - Construction-T/ALL.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Construction-T/ALL. 32.40-15 Section 32.40-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Accommodations for Officers and Crew § 32.40-15 Construction—T/ALL. All crew spaces are to be...

46 CFR 32.40-15 - Construction-T/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Construction-T/ALL. 32.40-15 Section 32.40-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Accommodations for Officers and Crew § 32.40-15 Construction—T/ALL. All crew spaces are to be...

26 CFR 1.118-2 - Contribution in aid of construction.

Code of Federal Regulations, 2010 CFR

2010-04-01

... adjusted basis of the water facility from zero to $20,000. (e) Statute of limitations—(1) Extension of... Contribution in aid of construction. (a) Special rule for water and sewerage disposal utilities—(1) In general... public utility that provides water or sewerage disposal services if— (i) The amount is a contribution in...

26 CFR 1.118-2 - Contribution in aid of construction.

Code of Federal Regulations, 2013 CFR

2013-04-01

... adjusted basis of the water facility from zero to $20,000. (e) Statute of limitations—(1) Extension of... Contribution in aid of construction. (a) Special rule for water and sewerage disposal utilities—(1) In general... public utility that provides water or sewerage disposal services if— (i) The amount is a contribution in...

26 CFR 1.118-2 - Contribution in aid of construction.

Code of Federal Regulations, 2011 CFR

2011-04-01

... adjusted basis of the water facility from zero to $20,000. (e) Statute of limitations—(1) Extension of... Contribution in aid of construction. (a) Special rule for water and sewerage disposal utilities—(1) In general... public utility that provides water or sewerage disposal services if— (i) The amount is a contribution in...

26 CFR 1.118-2 - Contribution in aid of construction.

Code of Federal Regulations, 2012 CFR

2012-04-01

... adjusted basis of the water facility from zero to $20,000. (e) Statute of limitations—(1) Extension of... Contribution in aid of construction. (a) Special rule for water and sewerage disposal utilities—(1) In general... public utility that provides water or sewerage disposal services if— (i) The amount is a contribution in...

26 CFR 1.118-2 - Contribution in aid of construction.

Code of Federal Regulations, 2014 CFR

2014-04-01

... adjusted basis of the water facility from zero to $20,000. (e) Statute of limitations—(1) Extension of... Contribution in aid of construction. (a) Special rule for water and sewerage disposal utilities—(1) In general... public utility that provides water or sewerage disposal services if— (i) The amount is a contribution in...

The Construction of "Female Citizens": A Socio-Historical Analysis of Girls' Education in Luxembourg

ERIC Educational Resources Information Center

Schreiber, Catherina

2014-01-01

Background: This paper will empirically investigate female education in Luxembourg from a historical perspective. A special focus will be laid on the question of how women in Luxembourgian society were constructed as female "citizens", even though they were, rather, considered as a homogeneous category limited to a private sphere…

The Social Construction of Death in the Gulf War.

ERIC Educational Resources Information Center

Umberson, Debra; Henderson, Kristin

1992-01-01

Applies social construction of reality example to explain why and how media reports facilitated denial of death in Gulf War. Conducted content analysis of war-related stories in "New York Times" for duration of Gulf War, giving special attention to direct and indirect references to death and killing. Analysis revealed four themes.…

Metric Conversion in the Construction Industries--Technical Issues and Status.

ERIC Educational Resources Information Center

Milton, Hans J.; Berry, Sandra A.

This Special Publication was prepared at the request of the Metric Symposium Planning Committee of the National Institute of Building Sciences (NIBS). It is intended to provide information on technical issues and status of metric conversion in the United States construction industries. It was made available to attendees at the NIBS Symposium on…

LSCA (Library Services and Construction Act, Title I) Special Project Reports, Fiscal Year 1976.

ERIC Educational Resources Information Center

Massachusetts State Board of Library Commissioners, Boston.

This collection of reports provides the objectives, background information, project descriptions, and evaluations for 16 public library programs funded through the Library Services and Construction Act in Massachusetts during FY 1976. The projects reflect the efforts being made by librarians to provide services to segments of their population who…

78 FR 65233 - Special Conditions: Bombardier Inc., Models BD-500-1A10 and BD-500-1A11 Series Airplanes...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... a novel or unusual design feature associated with aluminum-lithium fuselage construction that may... of the Bombardier C-series airplanes will be fabricated using aluminum-lithium construction. Structure fabricated from aluminum-lithium may provide different levels of protection from post-crash fuel...

36 CFR 223.38 - Standards for road design and construction.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Standards for road design and construction. 223.38 Section 223.38 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL PRODUCTS Timber Sale Contracts...

Views of Constructed Languages, with Special Reference to Esperanto: An Experimental Study.

ERIC Educational Resources Information Center

Edwards, John; MacPherson, Lynn

1987-01-01

A study of college faculty and student attitudes toward artificial languages, particularly Esperanto, found faculty more knowledgeable but less enthusiastic than students about the languages. Faculty were less likely to see practical benefits in the knowledge and use of constructed languages, and less interested in seeing them taught or learning…

"Mode of Acquisition" of Word Meanings: The Viability of a Theoretical Construct.

ERIC Educational Resources Information Center

Wauters, Loes N.; Tellings, Agnes E. J. M.; Van Bon, Wim H. J.; Van Haaften, A. Wouter

2003-01-01

Examines the reliability and validity of the construct, "mode of acquisition" (MOA). The MOA of a word denotes the way in which the word's meaning is learned. Subjects in one study were volunteers from third year special education courses and in a second study, educational professionals. (Author/VWL)

Construction of normal-regular decisions of Bessel typed special system

NASA Astrophysics Data System (ADS)

Tasmambetov, Zhaksylyk N.; Talipova, Meiramgul Zh.

2017-09-01

Studying a special system of differential equations in the separate production of the second order is solved by the degenerate hypergeometric function reducing to the Bessel functions of two variables. To construct a solution of this system near regular and irregular singularities, we use the method of Frobenius-Latysheva applying the concepts of rank and antirank. There is proved the basic theorem that establishes the existence of four linearly independent solutions of studying system type of Bessel. To prove the existence of normal-regular solutions we establish necessary conditions for the existence of such solutions. The existence and convergence of a normally regular solution are shown using the notion of rank and antirank.

Health professions: the origin of species.

PubMed

Hofoss, D

1986-01-01

Specialization is an important feature of post-World War II health sector development. Its value is indisputable. On the other hand, unchecked specialization also brings problems, notably of cost escalation and service profile twisting. To exploit the potentials of highly specialized medicine without neglecting the everyday problems that constitute the bulk of medicine, one needs a carefully constructed policy. To design such a policy, one needs, among other things, to understand the whys and hows of specialization. This reports discusses three different approaches to the understanding of the process of specialization: the sociological (S is a reflection of the selfish interests of the professions), the medical (S is the natural response to scientific and technological progress), and the economic (S is a result of increased market demand). Much is to be said in favour of the sociological explanation. Occupational groups do pursue interests of their own, centering on the construction and defence of job monopolies. The histories of the professions readily lend themselves to this kind of interpretation, and its gives, beyond doubt, valuable insight into the ways in which occupational groups relate to each other, to clients and to the surrounding society. This report, however, argues that the sociology of the professions is largely concerned with phenomena secondary to the process of specialization. It explains the behaviour of occupational groups, once they have been established. It does not, however, explain why they came into being in the first place. For that purpose, the perspective of medicine and, in particular, that of economy, may be more suitable. I support this position by data on the specialization of the health service system of Norway.

Validation of psychosocial scales for physical activity in university students

PubMed Central

Tassitano, Rafael Miranda; de Farias, José Cazuza; Rech, Cassiano Ricardo; Tenório, Maria Cecília Marinho; Cabral, Poliana Coelho; da Silva, Giselia Alves Pontes

2015-01-01

OBJECTIVE Translate the Patient-centered Assessment and Counseling for Exercise questionnaire, adapt it cross-culturally and identify the psychometric properties of the psychosocial scales for physical activity in young university students. METHODS The Patient-centered Assessment and Counseling for Exercise questionnaire is made up of 39 items divided into constructs based on the social cognitive theory and the transtheoretical model. The analyzed constructs were, as follows: behavior change strategy (15 items), decision-making process (10), self-efficacy (6), support from family (4), and support from friends (4). The validation procedures were conceptual, semantic, operational, and functional equivalences, in addition to the equivalence of the items and of measurements. The conceptual, of items and semantic equivalences were performed by a specialized committee. During measurement equivalence, the instrument was applied to 717 university students. Exploratory factor analysis was used to verify the loading of each item, explained variance and internal consistency of the constructs. Reproducibility was measured by means of intraclass correlation coefficient. RESULTS The two translations were equivalent and back-translation was similar to the original version, with few adaptations. The layout, presentation order of the constructs and items from the original version were kept in the same form as the original instrument. The sample size was adequate and was evaluated by the Kaiser-Meyer-Olkin test, with values between 0.72 and 0.91. The correlation matrix of the items presented r < 0.8 (p < 0.05). The factor loadings of the items from all the constructs were satisfactory (> 0.40), varying between 0.43 and 0.80, which explained between 45.4% and 59.0% of the variance. Internal consistency was satisfactory (α ≥ 0.70), with support from friends being 0.70 and 0.92 for self-efficacy. Most items (74.3%) presented values above 0.70 for the reproducibility test. CONCLUSIONS The validation process steps were considered satisfactory and adequate for applying to the population. PMID:26270013

Validation of psychosocial scales for physical activity in university students.

PubMed

Tassitano, Rafael Miranda; de Farias Júnior, José Cazuza; Rech, Cassiano Ricardo; Tenório, Maria Cecília Marinho; Cabral, Poliana Coelho; da Silva, Giselia Alves Pontes

2015-01-01

OBJECTIVE Translate the Patient-centered Assessment and Counseling for Exercise questionnaire, adapt it cross-culturally and identify the psychometric properties of the psychosocial scales for physical activity in young university students. METHODS The Patient-centered Assessment and Counseling for Exercise questionnaire is made up of 39 items divided into constructs based on the social cognitive theory and the transtheoretical model. The analyzed constructs were, as follows: behavior change strategy (15 items), decision-making process (10), self-efficacy (6), support from family (4), and support from friends (4). The validation procedures were conceptual, semantic, operational, and functional equivalences, in addition to the equivalence of the items and of measurements. The conceptual, of items and semantic equivalences were performed by a specialized committee. During measurement equivalence, the instrument was applied to 717 university students. Exploratory factor analysis was used to verify the loading of each item, explained variance and internal consistency of the constructs. Reproducibility was measured by means of intraclass correlation coefficient. RESULTS The two translations were equivalent and back-translation was similar to the original version, with few adaptations. The layout, presentation order of the constructs and items from the original version were kept in the same form as the original instrument. The sample size was adequate and was evaluated by the Kaiser-Meyer-Olkin test, with values between 0.72 and 0.91. The correlation matrix of the items presented r < 0.8 (p < 0.05). The factor loadings of the items from all the constructs were satisfactory (> 0.40), varying between 0.43 and 0.80, which explained between 45.4% and 59.0% of the variance. Internal consistency was satisfactory (α ≥ 0.70), with support from friends being 0.70 and 0.92 for self-efficacy. Most items (74.3%) presented values above 0.70 for the reproducibility test. CONCLUSIONS The validation process steps were considered satisfactory and adequate for applying to the population.

Why was Relativity Accepted?

NASA Astrophysics Data System (ADS)

Brush, S. G.

Historians of science have published many studies of the reception of Einstein's special and general theories of relativity. Based on a review of these studies, and my own research on the role of the light-bending prediction in the reception of general relativity, I discuss the role of three kinds of reasons for accepting relativity (1) empirical predictions and explanations; (2) social-psychological factors; and (3) aesthetic-mathematical factors. According to the historical studies, acceptance was a three-stage process. First, a few leading scientists adopted the special theory for aesthetic-mathematical reasons. In the second stage, their enthusiastic advocacy persuaded other scientists to work on the theory and apply it to problems currently of interest in atomic physics. The special theory was accepted by many German physicists by 1910 and had begun to attract some interest in other countries. In the third stage, the confirmation of Einstein's light-bending prediction attracted much public attention and forced all physicists to take the general theory of relativity seriously. In addition to light-bending, the explanation of the advance of Mercury's perihelion was considered strong evidence by theoretical physicists. The American astronomers who conducted successful tests of general relativity became defenders of the theory. There is little evidence that relativity was `socially constructed' but its initial acceptance was facilitated by the prestige and resources of its advocates.

An implantable seal-less centrifugal pump with integrated double-disk motor.

PubMed

Schima, H; Schmallegger, H; Huber, L; Birgmann, I; Reindl, C; Schmidt, C; Roschal, K; Wieselthaler, G; Trubel, W; Losert, U

1995-07-01

Thrombus formation and sealing problems at the shaft as well as the compact and efficient design of the driving unit have been major difficulties in the construction of a long-term implantable centrifugal pump. To eliminate the problems of the seal, motor size, and efficiency, two major steps were taken by modifying the Vienna implantable centrifugal pump. First, a special driving unit was developed, in which the permanent magnets of the motor themselves are used for coupling the force into the rotor. Second, the rotor shaft in the pumping chamber was eliminated by adopting a concept recently presented by Ohara. The rotor is supported by 3 pins, which run on a carbon disk, whose concave shape leads to stabilization. The device has the following specifications: size: 65 mm (diameter) by 35 mm (height), 101 cm3; priming volume 30 cm3, 240 g; and a 6-pole brushless double disk DC motor. The required input power of the described prototype is 15 W at 150 mm Hg, 5 L/min (overall eta = 11%), and has an in vitro index of hemolysis (IH) of 0.0046 g/100 L. The test for in vitro thrombus growth exhibited far less thrombus formation in the new design than in designs with axles. In conclusion, the design of a special driving unit and the elimination of the axle led to the construction of a small pump with very low blood traumatization.

The microbial-kill characteristics of saturated steam plus 1,000 to 10,000 ppm hydrogen peroxide at atmospheric pressure.

PubMed

Pflug, Irving J; Melgaard, Hans L; Schaffer, Shawn M; Lysfjord, Jack P

2008-01-01

This is the report of a project carried out to determine the microbial-kill characteristics of saturated steam plus hydrogen peroxide (H2O2) using a specially-constructed test apparatus. Spores on stainless-steel planchets were inserted into a flowing gaseous atmosphere of steam plus H2O2 for a timed exposure to the lethal agent. The specially-designed test apparatus and its operating parameters are described. Geobacillus stearothermophilus (former name, Bacillus stearothermophilus) spore-death rates were evaluated in several spore-planchet handling modes. Enumeration microbial recovery methods were used. The data were analyzed using survivor-curve methods; D-values were calculated using the initial number of spores per planchet and the number of spores surviving the process. Extensive tests were carried out using Geobacillus stearothermophilus spores; limited tests were carried out using Bacillus smithii ATCC 51232 (former name, Bacillus coagulans), Bacillus macerans, and Bacillus subtilis, subtilis ATCC 35021 spores (former name, Bacillus subtilis, CCC 5230, Kerns 15U). For G. stearothermophilus spores subjected to steam plus H2O2 and recovered using the 2B procedure (planchets deposited in sterile, 100-mL bottles containing 50.0 mL of buffer immediately after they were subjected to the steam-H2O2 condition; 11 experiments), the mean D-value was 0.48 min at 2,500 ppm and 0.22 min at 7,500 ppm. The application of steam plus H2O2 to the sterilization of barrier isolator enclosures is discussed.

Entropy Based Genetic Association Tests and Gene-Gene Interaction Tests

PubMed Central

de Andrade, Mariza; Wang, Xin

2011-01-01

In the past few years, several entropy-based tests have been proposed for testing either single SNP association or gene-gene interaction. These tests are mainly based on Shannon entropy and have higher statistical power when compared to standard χ2 tests. In this paper, we extend some of these tests using a more generalized entropy definition, Rényi entropy, where Shannon entropy is a special case of order 1. The order λ (>0) of Rényi entropy weights the events (genotype/haplotype) according to their probabilities (frequencies). Higher λ places more emphasis on higher probability events while smaller λ (close to 0) tends to assign weights more equally. Thus, by properly choosing the λ, one can potentially increase the power of the tests or the p-value level of significance. We conducted simulation as well as real data analyses to assess the impact of the order λ and the performance of these generalized tests. The results showed that for dominant model the order 2 test was more powerful and for multiplicative model the order 1 or 2 had similar power. The analyses indicate that the choice of λ depends on the underlying genetic model and Shannon entropy is not necessarily the most powerful entropy measure for constructing genetic association or interaction tests. PMID:23089811