Alcohol-Specific Parenting within a Cluster-Randomized Effectiveness Trial of a Swedish Primary Prevention Program

ERIC Educational Resources Information Center

Strandberg, Anna K.; Bodin, Maria C.

2011-01-01

Purpose: Within the framework of an ongoing cluster-randomized effectiveness trial of a parental prevention program, the aim of the present study is to investigate attitudes towards under-age drinking and use of program components, i.e. alcohol-specific parenting behaviors, in parents who did and did not take part in the programme.…

Component-specific modeling

NASA Technical Reports Server (NTRS)

Mcknight, R. L.

1985-01-01

Accomplishments are described for the second year effort of a 3-year program to develop methodology for component specific modeling of aircraft engine hot section components (turbine blades, turbine vanes, and burner liners). These accomplishments include: (1) engine thermodynamic and mission models; (2) geometry model generators; (3) remeshing; (4) specialty 3-D inelastic stuctural analysis; (5) computationally efficient solvers, (6) adaptive solution strategies; (7) engine performance parameters/component response variables decomposition and synthesis; (8) integrated software architecture and development, and (9) validation cases for software developed.

Using Indices of Fidelity to Intervention Core Components to Identify Program Active Ingredients

ERIC Educational Resources Information Center

Abry, Tashia; Hulleman, Chris S.; Rimm-Kaufman, Sara E.

2015-01-01

Identifying the active ingredients of an intervention--intervention-specific components serving as key levers of change--is crucial for unpacking the intervention black box. Measures of intervention fidelity can be used to identify specific active ingredients, yet such applications are rare. We illustrate how fidelity measures can be used to…

Set up for Success: An Examination of the Ronald E. McNair Postbaccalaureate Achievement Program's Mentoring Component

ERIC Educational Resources Information Center

Wyre, Dwuena Cene

2011-01-01

Often, individuals are set up to fail. However, effective mentoring can set individuals up to succeed. This nonexperimental cross-sectional, predictive study examines the Ronald E. McNair Postbaccalaureate Achievement Program's mentoring component. Specific focus is placed on faculty mentor competency and its impact on McNair student intent to…

EMC analysis of MOS-1

NASA Astrophysics Data System (ADS)

Ishizawa, Y.; Abe, K.; Shirako, G.; Takai, T.; Kato, H.

The electromagnetic compatibility (EMC) control method, system EMC analysis method, and system test method which have been applied to test the components of the MOS-1 satellite are described. The merits and demerits of the problem solving, specification, and system approaches to EMC control are summarized, and the data requirements of the SEMCAP (specification and electromagnetic compatibility analysis program) computer program for verifying the EMI safety margin of the components are sumamrized. Examples of EMC design are mentioned, and the EMC design process and selection method for EMC critical points are shown along with sample EMC test results.

44 CFR 354.5 - Description of site-specific, plume pathway EPZ biennial exercise-related component services and...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Control Program Directors, and the Nuclear Energy Institute. (21) Implement and coordinate REP Program... from our REP Program Strategic Review implementation and oversight working group activities. (24) Costs...

44 CFR 354.5 - Description of site-specific, plume pathway EPZ biennial exercise-related component services and...

Code of Federal Regulations, 2014 CFR

2014-10-01

... Control Program Directors, and the Nuclear Energy Institute. (21) Implement and coordinate REP Program... from our REP Program Strategic Review implementation and oversight working group activities. (24) Costs...

44 CFR 354.5 - Description of site-specific, plume pathway EPZ biennial exercise-related component services and...

Code of Federal Regulations, 2013 CFR

2013-10-01

... Control Program Directors, and the Nuclear Energy Institute. (21) Implement and coordinate REP Program... from our REP Program Strategic Review implementation and oversight working group activities. (24) Costs...

44 CFR 354.5 - Description of site-specific, plume pathway EPZ biennial exercise-related component services and...

Code of Federal Regulations, 2011 CFR

2011-10-01

... Control Program Directors, and the Nuclear Energy Institute. (21) Implement and coordinate REP Program... from our REP Program Strategic Review implementation and oversight working group activities. (24) Costs...

National evaluation of graduated driver licensing programs.

DOT National Transportation Integrated Search

2006-06-01

Context. Implementation of Graduated Driver Licensing (GDL) programs is associated with lower fatal crash : rates of young drivers, but the contribution of specific components of GDL programs is not known. : Objective. To determine which types of GDL...

Balancing generality and specificity in component-based reuse

NASA Technical Reports Server (NTRS)

Eichmann, David A.; Beck, Jon

1992-01-01

For a component industry to be successful, we must move beyond the current techniques of black box reuse and genericity to a more flexible framework supporting customization of components as well as instantiation and composition of components. Customization of components strikes a balanced between creating dozens of variations of a base component and requiring the overhead of unnecessary features of an 'everything but the kitchen sink' component. We argue that design and instantiation of reusable components have competing criteria - design-for-use strives for generality, design-with-reuse strives for specificity - and that providing mechanisms for each can be complementary rather than antagonistic. In particular, we demonstrate how program slicing techniques can be applied to customization of reusable components.

A Discrepancy-Based Methodology for Nuclear Training Program Evaluation.

ERIC Educational Resources Information Center

Cantor, Jeffrey A.

1991-01-01

A three-phase comprehensive process for commercial nuclear power training program evaluation is presented. The discrepancy-based methodology was developed after the Three Mile Island nuclear reactor accident. It facilitates analysis of program components to identify discrepancies among program specifications, actual outcomes, and industry…

Implementing corporate wellness programs: a business approach to program planning.

PubMed

Helmer, D C; Dunn, L M; Eaton, K; Macedonio, C; Lubritz, L

1995-11-01

1. Support of key decision makers is critical to the successful implementation of a corporate wellness program. Therefore, the program implementation plan must be communicated in a format and language readily understood by business people. 2. A business approach to corporate wellness program planning provides a standardized way to communicate the implementation plan. 3. A business approach incorporates the program planning components in a format that ranges from general to specific. This approach allows for flexibility and responsiveness to changes in program planning. 4. Components of the business approach are the executive summary, purpose, background, ground rules, approach, requirements, scope of work, schedule, and financials.

Modern & Classical Languages: K-12 Program EValuation 1988-89.

ERIC Educational Resources Information Center

Martinez, Margaret Perea

This evaluation of the modern and classical languages programs, K-12, in the Albuquerque (New Mexico) public school system provides general information on the program's history, philosophy, recognition, curriculum development, teachers, and activities. Specific information is offered on the different program components, namely, the elementary…

A Comprehensive Staff Approach to Problem Wandering.

ERIC Educational Resources Information Center

Rader, Joanne

1987-01-01

Describes specific comprehensive program implemented in intermediate care facility/skilled nursing facility that reduced problematic wandering by patients, increased patient freedom and safety, and increased staff skill and comfort in handling wandering behaviors. Describes program components, problem identification, prevention programs,…

1.5 MW RF Load for ITER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ives, Robert Lawrence; Marsden, David; Collins, George

Calabazas Creek Research, Inc. developed a 1.5 MW RF load for the ITER fusion research facility currently under construction in France. This program leveraged technology developed in two previous SBIR programs that successfully developed high power RF loads for fusion research applications. This program specifically focused on modifications required by revised technical performance, materials, and assembly specification for ITER. This program implemented an innovative approach to actively distribute the RF power inside the load to avoid excessive heating or arcing associated with constructive interference. The new design implemented materials and assembly changes required to meet specifications. Critical components were builtmore » and successfully tested during the program.« less

SD-4060OCPLT4 program, user's guide

NASA Technical Reports Server (NTRS)

Glazer, J.

1973-01-01

A brief description of the Orbit Comparison Plot (OCPLT4) program is presented, along with user information and a source program listing. In addition to correcting several errors that existed in the original program, this program incorporates the following new features: (1) For any satellite whose observations are processed by the Definitive Orbit Determination System (DODS), the orbital uncertainty estimates (OUE) can be obtained via appropriate card input with no major modification to the program. (2) All satellite-related information (e.g., plotter scales, cutoff limits, plotting frequencies) is user controlled via card input. (3) Not all components of OUE must be obtained. The user has the option of obtaining only the radial component if there is no need for the other two components. (4) The altitude and time graph formats are controlled by the user and are not stored for specific satellites.

Healthcare team training programs aimed at improving depression management in primary care: A systematic review.

PubMed

Vöhringer, Paul A; Castro, Ariel; Martínez, Pablo; Tala, Álvaro; Medina, Simón; Rojas, Graciela

2016-08-01

Although evidence from Latin America and the Caribbean suggests that depression can be effectively treated in primary care settings, depression management remains unevenly performed. This systematic review evaluates all the international evidence on healthcare team training programs aimed at improving the outcomes of patients with depression. Three databases were searched for articles in English or Spanish indexed up to November 20, 2014. Studies were included if they fulfilled the following conditions: clinical trials, meta-analyses, or systematic reviews; and if they evaluated a training or educational program intended to improve the management of depression by primary healthcare teams, and assessed change in depressive symptoms, diagnosis or response rates, referral rates, patients' satisfaction and/or quality of life, and the effectiveness of treatments. Nine studies were included in this systematic review. Five trials tested the effectiveness of multi-component interventions (training included), and the remaining studies evaluated the effectiveness of specific training programs for depression management. All the studies that implemented multi-component interventions were efficacious, and half of the training trials were shown to be effective. Contribution of training programs alone to the effectiveness of multi-component interventions is yet to be established. The lack of specificity regarding health providers' characteristics might be a confounding factor. The review conducted suggests that stand-alone training programs are less effective than multi-component interventions. In applying the evidence gathered from developed countries to Latin America and the Caribbean, these training programs must consider and address local conditions of mental health systems, and therefore multi-component interventions may be warranted. Copyright © 2016 Elsevier B.V. All rights reserved.

Components of Effective Diversity Training Programmes.

ERIC Educational Resources Information Center

Wentling, Rose Mary; Palma-Rivas, Nilda

1999-01-01

Interviews with 12 diversity experts uncovered components of effective diversity training programs: management commitment and support, inclusion in strategic planning, attention to specific organizational needs, qualified trainers, mandatory attendance, inclusiveness, trust and confidentiality, accountability, and clearly focused evaluation. (SK)

NASA helicopter transmission system technology program

NASA Technical Reports Server (NTRS)

Zaretsky, E. V.

1983-01-01

The purpose of the NASA Helicopter Transmission System Technology Program is to improve specific mechanical components and the technology for combining these into advanced drive systems to make helicopters more viable and cost competitive for commerical applications. The history, goals, and elements of the program are discussed.

Integrating Psychosocial Programs in Multisector Responses to International Disasters

ERIC Educational Resources Information Center

Diaz, Joseph Orlando Prewitt

2008-01-01

This article describes the role of psychosocial support programs in American Red Cross-sponsored humanitarian assistance efforts in international disasters. The American Red Cross psychosocial support program consists of four specific components: participatory crisis assessment, dealing with survivors' root shock, community mobilization, and…

Toward More Precise Definition and Evaluation of Televised Educational Programming

ERIC Educational Resources Information Center

Aversa Fran; Morrison, Gary R.

1978-01-01

An operational definition of public television programming and its implications for development and production agencies is sorely needed. This article explores some of the components of such a definition and examines the differences in several types of educational programming in terms of specific design and evaluation variables of the program.…

Framework for End-User Programming of Cross-Smart Space Applications

PubMed Central

Palviainen, Marko; Kuusijärvi, Jarkko; Ovaska, Eila

2012-01-01

Cross-smart space applications are specific types of software services that enable users to share information, monitor the physical and logical surroundings and control it in a way that is meaningful for the user's situation. For developing cross-smart space applications, this paper makes two main contributions: it introduces (i) a component design and scripting method for end-user programming of cross-smart space applications and (ii) a backend framework of components that interwork to support the brunt of the RDFScript translation, and the use and execution of ontology models. Before end-user programming activities, the software professionals must develop easy-to-apply Driver components for the APIs of existing software systems. Thereafter, end-users are able to create applications from the commands of the Driver components with the help of the provided toolset. The paper also introduces the reference implementation of the framework, tools for the Driver component development and end-user programming of cross-smart space applications and the first evaluation results on their application. PMID:23202169

Program For Analysis Of Metal-Matrix Composites

NASA Technical Reports Server (NTRS)

Murthy, P. L. N.; Mital, S. K.

1994-01-01

METCAN (METal matrix Composite ANalyzer) is computer program used to simulate computationally nonlinear behavior of high-temperature metal-matrix composite structural components in specific applications, providing comprehensive analyses of thermal and mechanical performances. Written in FORTRAN 77.

An expert system based software sizing tool, phase 2

NASA Technical Reports Server (NTRS)

Friedlander, David

1990-01-01

A software tool was developed for predicting the size of a future computer program at an early stage in its development. The system is intended to enable a user who is not expert in Software Engineering to estimate software size in lines of source code with an accuracy similar to that of an expert, based on the program's functional specifications. The project was planned as a knowledge based system with a field prototype as the goal of Phase 2 and a commercial system planned for Phase 3. The researchers used techniques from Artificial Intelligence and knowledge from human experts and existing software from NASA's COSMIC database. They devised a classification scheme for the software specifications, and a small set of generic software components that represent complexity and apply to large classes of programs. The specifications are converted to generic components by a set of rules and the generic components are input to a nonlinear sizing function which makes the final prediction. The system developed for this project predicted code sizes from the database with a bias factor of 1.06 and a fluctuation factor of 1.77, an accuracy similar to that of human experts but without their significant optimistic bias.

Common components of evidence-based parenting programs for preventing maltreatment of school-age children.

PubMed

Temcheff, Caroline E; Letarte, Marie-Josée; Boutin, Stéphanie; Marcil, Katherine

2018-06-01

Child maltreatment can lead to a variety of negative outcomes in childhood including physical and mental health problems that can extend into adulthood. Given the transactional nature of child maltreatment and the difficulties that many maltreating families experience, child protection services typically offer various kinds of programs to maltreated children, their parents, and/or their families. Although the specific difficulties experienced by these families may vary, sub-optimal parenting practices are typically part of the picture and may play a central role in maltreated children's development. Hence, to deal with child maltreatment, programs that focus on parenting practices are essential, and identifying the common components of effective programs is of critical importance. The objectives of the present study were to: 1) describe the components of evidence-based parenting programs aimed at parents who have maltreated their elementary school-aged children or are at-risk for doing so and 2) identify the components that are common to these programs, using the approach proposed by Barth and Liggett-Creel (2014). Fourteen evidence-based parenting programs aimed at parents who had maltreated their elementary school-aged children (ages 6-12) or were at-risk for doing so were identified using both a review of relevant online databases of evidence-based programs (California Evidence-Based Clearinghouse for Child Welfare, Blueprints for Healthy Youth Development, Youth.gov, and the National Registry of Evidence-based Programs and Practices). Common components were identified (operationalized as components present in two thirds of programs) and discussed. The identification of common components of evidence-based programs may help clinicians choose the best intervention methods. Copyright © 2018. Published by Elsevier Ltd.

Analysis of School Food Safety Programs Based on HACCP Principles

ERIC Educational Resources Information Center

Roberts, Kevin R.; Sauer, Kevin; Sneed, Jeannie; Kwon, Junehee; Olds, David; Cole, Kerri; Shanklin, Carol

2014-01-01

Purpose/Objectives: The purpose of this study was to determine how school districts have implemented food safety programs based on HACCP principles. Specific objectives included: (1) Evaluate how schools are implementing components of food safety programs; and (2) Determine foodservice employees food-handling practices related to food safety.…

Labor Market Assessments: An Essential Data Element for Program Development and Evaluation.

ERIC Educational Resources Information Center

Friedel, Janice N.

The Eastern Iowa Community College District (EICCD) has conducted labor market assessments in 17 occupations related to its programs. These assessments are an integral component of the EICCD program evaluation process. These assessments provide valuable information in the specific occupational areas regarding (1) characteristics of the local…

Evaluation of the Implementation of Operations and Maintenance Programs in New Jersey Schools.

ERIC Educational Resources Information Center

Kominsky, John R.; Freyberg, Ronald W.; Gerber, Donald R.; Centifonti, Gary J.

All schools are required to develop and implement an asbestos management plan (AMP). The key component of this plan is each school's operations and maintenance (O&M) program. This report outlines the importance of such programs. It describes an O&M program as an administrative framework that prescribes specific activities and work…

THE SUPERSITES PROGRAM

EPA Science Inventory

The PM2.5 monitoring program is dominated by gravimetric measurements (over 1000 mass samplers nationwide) specific for indicator mass, where the primary objective is comparisons with the PM2.5 National Ambient Air Quality Standards (NAAQS). The other major component of the net...

Rapidly Deployed Modular Telemetry System

NASA Technical Reports Server (NTRS)

Varnavas, Kosta A. (Inventor); Sims, William Herbert, III (Inventor)

2013-01-01

The present invention is a telemetry system, and more specifically is a rapidly deployed modular telemetry apparatus which utilizes of SDR technology and the FPGA programming capability to reduce the number of hardware components and programming required to deploy a telemetry system.

Formalizing Knowledge in Multi-Scale Agent-Based Simulations

PubMed Central

Somogyi, Endre; Sluka, James P.; Glazier, James A.

2017-01-01

Multi-scale, agent-based simulations of cellular and tissue biology are increasingly common. These simulations combine and integrate a range of components from different domains. Simulations continuously create, destroy and reorganize constituent elements causing their interactions to dynamically change. For example, the multi-cellular tissue development process coordinates molecular, cellular and tissue scale objects with biochemical, biomechanical, spatial and behavioral processes to form a dynamic network. Different domain specific languages can describe these components in isolation, but cannot describe their interactions. No current programming language is designed to represent in human readable and reusable form the domain specific knowledge contained in these components and interactions. We present a new hybrid programming language paradigm that naturally expresses the complex multi-scale objects and dynamic interactions in a unified way and allows domain knowledge to be captured, searched, formalized, extracted and reused. PMID:29338063

Formalizing Knowledge in Multi-Scale Agent-Based Simulations.

PubMed

Somogyi, Endre; Sluka, James P; Glazier, James A

2016-10-01

Multi-scale, agent-based simulations of cellular and tissue biology are increasingly common. These simulations combine and integrate a range of components from different domains. Simulations continuously create, destroy and reorganize constituent elements causing their interactions to dynamically change. For example, the multi-cellular tissue development process coordinates molecular, cellular and tissue scale objects with biochemical, biomechanical, spatial and behavioral processes to form a dynamic network. Different domain specific languages can describe these components in isolation, but cannot describe their interactions. No current programming language is designed to represent in human readable and reusable form the domain specific knowledge contained in these components and interactions. We present a new hybrid programming language paradigm that naturally expresses the complex multi-scale objects and dynamic interactions in a unified way and allows domain knowledge to be captured, searched, formalized, extracted and reused.

Domain specific software architectures: Command and control

NASA Technical Reports Server (NTRS)

Braun, Christine; Hatch, William; Ruegsegger, Theodore; Balzer, Bob; Feather, Martin; Goldman, Neil; Wile, Dave

1992-01-01

GTE is the Command and Control contractor for the Domain Specific Software Architectures program. The objective of this program is to develop and demonstrate an architecture-driven, component-based capability for the automated generation of command and control (C2) applications. Such a capability will significantly reduce the cost of C2 applications development and will lead to improved system quality and reliability through the use of proven architectures and components. A major focus of GTE's approach is the automated generation of application components in particular subdomains. Our initial work in this area has concentrated in the message handling subdomain; we have defined and prototyped an approach that can automate one of the most software-intensive parts of C2 systems development. This paper provides an overview of the GTE team's DSSA approach and then presents our work on automated support for message processing.

Optical read/write memory system components

NASA Technical Reports Server (NTRS)

Kozma, A.

1972-01-01

The optical components of a breadboard holographic read/write memory system have been fabricated and the parameters specified of the major system components: (1) a laser system; (2) an x-y beam deflector; (3) a block data composer; (4) the read/write memory material; (5) an output detector array; and (6) the electronics to drive, synchronize, and control all system components. The objectives of the investigation were divided into three concurrent phases: (1) to supply and fabricate the major components according to the previously established specifications; (2) to prepare computer programs to simulate the entire holographic memory system so that a designer can balance the requirements on the various components; and (3) to conduct a development program to optimize the combined recording and reconstruction process of the high density holographic memory system.

International Organization for Standardization (ISO) 15189

PubMed Central

Schneider, Frank; Friedberg, Richard C.

2017-01-01

The College of American Pathologists (CAP) offers a suite of laboratory accreditation programs, including one specific to accreditation to the international organization for standardization (ISO) 15189 standard for quality management specific to medical laboratories. CAP leaders offer an overview of ISO 15189 including its components, internal audits, occurrence management, document control, and risk management. The authors provide a comparison of its own ISO 15189 program, CAP 15189, to the CAP Laboratory Accreditation Program. The authors conclude with why laboratories should use ISO 15189. PMID:28643484

THE US EPA'S SUPERSITES PROGRAM

EPA Science Inventory

The PM2.5 monitoring program is dominated by gravimetric measurements (over 1000 mass samplers nationwide) specific for mass, where the primary objective is comparisons with the PMZ 5 National Ambient Air Quality Standards (NAAQS). The other major component of the network is th...

Bridging evidence-practice gaps: improving use of medicines in elderly Australian veterans.

PubMed

Roughead, Elizabeth E; Kalisch Ellett, Lisa M; Ramsay, Emmae N; Pratt, Nicole L; Barratt, John D; LeBlanc, Vanessa T; Ryan, Philip; Peck, Robert; Killer, Graeme; Gilbert, Andrew L

2013-12-12

The Australian Government Department of Veterans' Affairs (DVA) funds an ongoing health promotion based program to improve use of medicines and related health services, which implements interventions that include audit and feedback in the form of patient-specific feedback generated from administrative claims records. We aimed to determine changes in medicine use as a result of the program. The program provides targeted patient-specific feedback to medical practitioners. The feedback is supported with educational material developed by a clinical panel, subject to peer review and overseen by a national editorial committee. Veterans who meet target criteria also receive educational brochures. The program is supported by a national call centre and ongoing national consultation. Segmented regression analyses (interrupted time series) were undertaken to assess changes in medication use in targeted veterans pre and post each intervention. 12 interventions were included; three to increase medicine use, seven which aimed to reduce use, and two which had combination of messages to change use. All programs that aimed to increase medicine use were effective, with relative effect sizes at the time of the intervention ranging from 1% to 8%. Mixed results were seen with programs aiming to reduce inappropriate medicine use. Highly specific programs were effective, with relative effect sizes at the time of the intervention of 10% decline in use of NSAIDs in high risk groups and 14% decline in use of antipsychotics in dementia. Interventions targeting combinations of medicines, including medicine interactions and potentially inappropriate medicines in the elderly did not change practice significantly. Interventions with combinations of messages targeting multiple components of practice had an impact on one component, but not all components targeted. The Veterans' MATES program showed positive practice change over time, with interventions increasing use of appropriate medicines where under-use was evident and reduced use of inappropriate medicines when single medicines were targeted. Combinations of messages were less effective, suggesting specific messages focusing on single medicines are required to maximise effect. The program provides a model that could be replicated in other settings.

A Systematic Review of Health-Promotion Programs in NCAA Division III Institutions

ERIC Educational Resources Information Center

Hanson, Matthew

2011-01-01

Health-promotion in the workplace has existed for numerous years. However, the availability of health-promotion programs offered in institutions of higher education has seemed to lag behind other industries such as business. The purpose of this survey research project was to identify specific components of health-promotion programs within NCAA…

The Effectiveness of a Web-Based Motor Skill Assessment Training Program

ERIC Educational Resources Information Center

Kelly, Luke E.; Moran, Thomas E.

2010-01-01

The purpose of this study was to evaluate the effectiveness of a web-based, intereactive video assessment program on teaching preservice physical education majors to assess the motor skill of kicking. The program provided component specific feedback through tutorial, guided practice, and competency training options. The 72 participants were…

Tamarisk coalition - native riparian plant materials program

Treesearch

Stacy Kolegas

2012-01-01

The Tamarisk Coalition (TC), a nonprofit organization dedicated to riparian restoration in the western United States, has created a Native Plant Materials Program to address the identified need for native riparian plant species for use in revegetation efforts on the Colorado Plateau. The specific components of the Native Plant Materials Program include: 1) provide seed...

Fine-Tuning Summer Research Programs to Promote Underrepresented Students' Persistence in the STEM Pathway

ERIC Educational Resources Information Center

Ghee, Medeva; Keels, Micere; Collins, Deborah; Neal-Spence, Cynthia; Baker, Earnestine

2016-01-01

Although the importance of undergraduate research experiences in preparing students for graduate study and research careers is well documented, specific examination of program components is needed to assess the impact of these programs on underrepresented (UR) students. The Leadership Alliance, a consortium of leading PhD-granting and…

Development tests for the 2.5 megawatt Mod-2 wind turbine generator

NASA Technical Reports Server (NTRS)

Andrews, J. S.; Baskin, J. M.

1982-01-01

The 2.5 megawatt MOD-2 wind turbine generator test program is discussed. The development of the 2.5 megawatt MOD-2 wind turbine generator included an extensive program of testing which encompassed verification of analytical procedures, component development, and integrated system verification. The test program was to assure achievement of the thirty year design operational life of the wind turbine system as well as to minimize costly design modifications which would otherwise have been required during on site system testing. Computer codes were modified, fatigue life of structure and dynamic components were verified, mechanical and electrical component and subsystems were functionally checked and modified where necessary to meet system specifications, and measured dynamic responses of coupled systems confirmed analytical predictions.

Perspectives of primary health care staff on the implementation of a sexual health quality improvement program: a qualitative study in remote aboriginal communities in Australia.

PubMed

Hengel, Belinda; Bell, Stephen; Garton, Linda; Ward, James; Rumbold, Alice; Taylor-Thomson, Debbie; Silver, Bronwyn; McGregor, Skye; Dyda, Amalie; Knox, Janet; Guy, Rebecca; Maher, Lisa; Kaldor, John Martin

2018-04-02

Young people living in remote Australian Aboriginal communities experience high rates of sexually transmissible infections (STIs). STRIVE (STIs in Remote communities, ImproVed and Enhanced primary care) was a cluster randomised control trial of a sexual health continuous quality improvement (CQI) program. As part of the trial, qualitative research was conducted to explore staff perceptions of the CQI components, their normalisation and integration into routine practice, and the factors which influenced these processes. In-depth semi-structured interviews were conducted with 41 clinical staff at 22 remote community clinics during 2011-2013. Normalisation process theory was used to frame the analysis of interview data and to provide insights into enablers and barriers to the integration and normalisation of the CQI program and its six specific components. Of the CQI components, participants reported that the clinical data reports had the highest degree of integration and normalisation. Action plan setting, the Systems Assessment Tool, and the STRIVE coordinator role, were perceived as adding value to the program, but were less readily integrated or normalised. The remaining two components (dedicated funding for health promotion and service incentive payments) were seen as least relevant. Our analysis also highlighted factors which enabled greater integration of the CQI components. These included familiarity with CQI tools, increased accountability of health centre staff and the translation of the CQI program into guideline-driven care. The analysis also identified barriers, including high staff turnover, limited time involved in the program and competing clinical demands and programs. Across all of the CQI components, the clinical data reports had the highest degree of integration and normalisation. The action plans, systems assessment tool and the STRIVE coordinator role all complemented the data reports and allowed these components to be translated directly into clinical activity. To ensure their uptake, CQI programs must acknowledge local clinical guidelines, be compatible with translation into clinical activity and have managerial support. Sexual health CQI needs to align with other CQI activities, engage staff and promote accountability through the provision of clinic specific data and regular face-to-face meetings. Australian and New Zealand Clinical Trials Registry ACTRN12610000358044 . Registered 6/05/2010. Prospectively Registered.

An integrated database with system optimization and design features

NASA Technical Reports Server (NTRS)

Arabyan, A.; Nikravesh, P. E.; Vincent, T. L.

1992-01-01

A customized, mission-specific relational database package was developed to allow researchers working on the Mars oxygen manufacturing plant to enter physical description, engineering, and connectivity data through a uniform, graphical interface and to store the data in formats compatible with other software also developed as part of the project. These latter components include an optimization program to maximize or minimize various criteria as the system evolves into its final design; programs to simulate the behavior of various parts of the plant in Martian conditions; an animation program which, in different modes, provides visual feedback to designers and researchers about the location of and temperature distribution among components as well as heat, mass, and data flow through the plant as it operates in different scenarios; and a control program to investigate the stability and response of the system under different disturbance conditions. All components of the system are interconnected so that changes entered through one component are reflected in the others.

2nd Generation RLV Risk Reduction Definition Program: Pratt & Whitney Propulsion Risk Reduction Requirements Program (TA-3 & TA-4)

NASA Technical Reports Server (NTRS)

Matlock, Steve

2001-01-01

This is the final report and addresses all of the work performed on this program. Specifically, it covers vehicle architecture background, definition of six baseline engine cycles, reliability baseline (space shuttle main engine QRAS), and component level reliability/performance/cost for the six baseline cycles, and selection of 3 cycles for further study. This report further addresses technology improvement selection and component level reliability/performance/cost for the three cycles selected for further study, as well as risk reduction plans, and recommendation for future studies.

Matching Interventions to Children's Mental Health Needs: Feasibility and Acceptability of a Pilot School-Based Trauma Intervention Program

ERIC Educational Resources Information Center

Brown, Elissa J.; McQuaid, Jennifer; Farina, Lana; Ali, Rehana; Winnick-Gelles, Amy

2006-01-01

The primary goal was to develop and implement a school-based, trauma-specific intervention program for inner-city children exposed to the World Trade Center attacks on September 11th, 2001. The feasibility and acceptability of the program, and its research component, were examined. The efficacy of the program was evaluated in a pilot study.…

Employer Recruitment Is Not the Problem: A Study of School-to-Work Transition Programs. IEE Brief Number 21.

ERIC Educational Resources Information Center

Hughes, Katherine L.

To study employer motivations for participating in school-to-work (STW) programs, researchers sought programs with a strong work-based learning component, specifically those where employers took students as interns or apprentices for one or two school years. In 1995 and 1996, 1 or 2 site visits were made to each of 12 programs. Researchers toured…

Exploring the Suitability of an English for Health Sciences Program: Model and Report of a Self-Evaluation Process

ERIC Educational Resources Information Center

Ferrer, Erica; Pérez, Yuddy

2017-01-01

Program evaluation is a process of carefully collecting information in order to make informed decisions to strengthen specific components of a given program. The type of evaluation an institution decides to undertake depends on the purpose as well as on the information the institution wants to find out about its program. Self-evaluation represents…

Supporting research and technology

NASA Technical Reports Server (NTRS)

1971-01-01

The development of definition of the modular space station is discussed. The modular approach was evaluated, the requirements were defined, and program definition and design were accomplished. The features of the program which significantly affect the initial development and early operating costs were identified and their impacts on the program were assessed. Specifications of various systems and components are included.

An analysis of the adaptability of a professional development program in public health: results from the ALPS Study.

PubMed

Richard, Lucie; Torres, Sara; Tremblay, Marie-Claude; Chiocchio, François; Litvak, Éric; Fortin-Pellerin, Laurence; Beaudet, Nicole

2015-06-14

Professional development is a key component of effective public health infrastructures. To be successful, professional development programs in public health and health promotion must adapt to practitioners' complex real-world practice settings while preserving the core components of those programs' models and theoretical bases. An appropriate balance must be struck between implementation fidelity, defined as respecting the core nature of the program that underlies its effects, and adaptability to context to maximize benefit in specific situations. This article presents a professional development pilot program, the Health Promotion Laboratory (HPL), and analyzes how it was adapted to three different settings while preserving its core components. An exploratory analysis was also conducted to identify team and contextual factors that might have been at play in the emergence of implementation profiles in each site. This paper describes the program, its core components and adaptive features, along with three implementation experiences in local public health teams in Quebec, Canada. For each setting, documentary sources were analyzed to trace the implementation of activities, including temporal patterns throughout the project for each program component. Information about teams and their contexts/settings was obtained through documentary analysis and semi-structured interviews with HPL participants, colleagues and managers from each organization. While each team developed a unique pattern of implementing the activities, all the program's core components were implemented. Differences of implementation were observed in terms of numbers and percentages of activities related to different components of the program as well as in the patterns of activities across time. It is plausible that organizational characteristics influencing, for example, work schedule flexibility or learning culture might have played a role in the HPL implementation process. This paper shows how a professional development program model can be adapted to different contexts while preserving its core components. Capturing the heterogeneity of the intervention's exposure, as was done here, will make possible in-depth impact analyses involving, for example, the testing of program-context interactions to identify program outcomes predictors. Such work is essential to advance knowledge on the action mechanisms of professional development programs.

International Organization for Standardization (ISO) 15189.

PubMed

Schneider, Frank; Maurer, Caroline; Friedberg, Richard C

2017-09-01

The College of American Pathologists (CAP) offers a suite of laboratory accreditation programs, including one specific to accreditation to the international organization for standardization (ISO) 15189 standard for quality management specific to medical laboratories. CAP leaders offer an overview of ISO 15189 including its components, internal audits, occurrence management, document control, and risk management. The authors provide a comparison of its own ISO 15189 program, CAP 15189, to the CAP Laboratory Accreditation Program. The authors conclude with why laboratories should use ISO 15189. © The Korean Society for Laboratory Medicine.

KONFIG and REKONFIG: Two interactive preprocessing to the Navy/NASA Engine Program (NNEP)

NASA Technical Reports Server (NTRS)

Fishbach, L. H.

1981-01-01

The NNEP is a computer program that is currently being used to simulate the thermodynamic cycle performance of almost all types of turbine engines by many government, industry, and university personnel. The NNEP uses arrays of input data to set up the engine simulation and component matching method as well as to describe the characteristics of the components. A preprocessing program (KONFIG) is described in which the user at a terminal on a time shared computer can interactively prepare the arrays of data required. It is intended to make it easier for the occasional or new user to operate NNEP. Another preprocessing program (REKONFIG) in which the user can modify the component specifications of a previously configured NNEP dataset is also described. It is intended to aid in preparing data for parametric studies and/or studies of similar engines such a mixed flow turbofans, turboshafts, etc.

An investigation of constraint-based component-modeling for knowledge representation in computer-aided conceptual design

NASA Technical Reports Server (NTRS)

Kolb, Mark A.

1990-01-01

Originally, computer programs for engineering design focused on detailed geometric design. Later, computer programs for algorithmically performing the preliminary design of specific well-defined classes of objects became commonplace. However, due to the need for extreme flexibility, it appears unlikely that conventional programming techniques will prove fruitful in developing computer aids for engineering conceptual design. The use of symbolic processing techniques, such as object-oriented programming and constraint propagation, facilitate such flexibility. Object-oriented programming allows programs to be organized around the objects and behavior to be simulated, rather than around fixed sequences of function- and subroutine-calls. Constraint propagation allows declarative statements to be understood as designating multi-directional mathematical relationships among all the variables of an equation, rather than as unidirectional assignments to the variable on the left-hand side of the equation, as in conventional computer programs. The research has concentrated on applying these two techniques to the development of a general-purpose computer aid for engineering conceptual design. Object-oriented programming techniques are utilized to implement a user-extensible database of design components. The mathematical relationships which model both geometry and physics of these components are managed via constraint propagation. In addition, to this component-based hierarchy, special-purpose data structures are provided for describing component interactions and supporting state-dependent parameters. In order to investigate the utility of this approach, a number of sample design problems from the field of aerospace engineering were implemented using the prototype design tool, Rubber Airplane. The additional level of organizational structure obtained by representing design knowledge in terms of components is observed to provide greater convenience to the program user, and to result in a database of engineering information which is easier both to maintain and to extend.

A New Competitive Edge. Volunteers from the Workplace.

ERIC Educational Resources Information Center

Vizza, Cynthia; And Others

This book provides information on workplace volunteering and how employee volunteering programs operate in specific corporate cultures. Chapter 1 focuses on the rationale upon which corporate volunteer programs are constructed. The rationale's four basic components are discussed in detail: quality of life, worker participation, responding to…

76 FR 57897 - Energy Conservation Program: Energy Conservation Standards for Certain External Power Supplies

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... Energy Conservation Program: Energy Conservation Standards for Certain External Power Supplies AGENCY... external power supplies used in specific applications from certain energy conservation standards prescribed... external power supplies used either in security or life safety alarms or surveillance system components...

Active for Life: Developmentally Appropriate Movement Programs for Young Children.

ERIC Educational Resources Information Center

Sanders, Stephen W.

This book provides guidance on what high-quality movement programs for young children should include, offering a curricular foundation, strategies for teaching, and assessment ideas. It defines and illustrates specific interrelated components of developmentally appropriate practice in providing movement education for young children. There are…

Recommended observational skills training for IAEA safeguards inspections. Final report: Recommended observational skills training for IAEA safeguards inspections

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toquam, J.L.; Morris, F.A.

This is the second of two reports prepared to assist the International Atomic Energy Agency (IAEA or Agency) in enhancing the effectiveness of its international safeguards inspections through inspector training in {open_quotes}Observational Skills{close_quotes}. The first (Phase 1) report was essentially exploratory. It defined Observational Skills broadly to include all appropriate cognitive, communications, and interpersonal techniques that have the potential to help IAEA safeguards inspectors function more effectively. It identified 10 specific Observational Skills components, analyzed their relevance to IAEA safeguards inspections, and reviewed a variety of inspection programs in the public and private sectors that provide training in one ormore » more of these components. The report concluded that while it should be possible to draw upon these other programs in developing Observational Skills training for IAEA inspectors, the approaches utilized in these programs will likely require significant adaption to support the specific job requirements, policies, and practices that define the IAEA inspector`s job. The overall objective of this second (Phase 2) report is to provide a basis for the actual design and delivery of Observational Skills training to IAEA inspectors. The more specific purposes of this report are to convey a fuller understanding of the potential application of Observational Skills to the inspector`s job, describe inspector perspectives on the relevance and importance of particular Observational Skills, identify the specific Observational Skill components that are most important and relevant to enhancing safeguards inspections, and make recommendations as to Observational Skills training for the IAEA`s consideration in further developing its Safeguards training program.« less

Exercise Science Academic Programs and Research in the Philippines

PubMed Central

MADRIGAL, NORBERTO; REYES, JOSEPHINE JOY; PAGADUAN, JEFFREY; ESPINO, REIL VINARD

2010-01-01

In this invited editorial, professors from leading institutions in the Philippines, share information regarding their programs relating to Exercise Science. They have provided information on academic components such as entrance requirements, progression through programs, and professional opportunities available to students following completion; as well as details regarding funding available to students to participate in research, collaboration, and specific research interests. PMID:27182343

How Long after? A Natural Experiment Assessing the Impact of the Length of Aftercare Service Delivery on Recidivism

ERIC Educational Resources Information Center

Kurlychek, Megan C.; Wheeler, Andrew P.; Tinik, Leigh A.; Kempinen, Cynthia A.

2011-01-01

Although aftercare programs have been gaining popularity as a mechanism for helping offenders readjust to society, evaluations of their success remain varied. This is most likely due to the diversity of programs labeled as aftercare and the inability of research to isolate specific program components. The current study capitalizes on a natural…

Software packager user's guide

NASA Technical Reports Server (NTRS)

Callahan, John R.

1995-01-01

Software integration is a growing area of concern for many programmers and software managers because the need to build new programs quickly from existing components is greater than ever. This includes building versions of software products for multiple hardware platforms and operating systems, building programs from components written in different languages, and building systems from components that must execute on different machines in a distributed network. The goal of software integration is to make building new programs from existing components more seamless -- programmers should pay minimal attention to the underlying configuration issues involved. Libraries of reusable components and classes are important tools but only partial solutions to software development problems. Even though software components may have compatible interfaces, there may be other reasons, such as differences between execution environments, why they cannot be integrated. Often, components must be adapted or reimplemented to fit into another application because of implementation differences -- they are implemented in different programming languages, dependent on different operating system resources, or must execute on different physical machines. The software packager is a tool that allows programmers to deal with interfaces between software components and ignore complex integration details. The packager takes modular descriptions of the structure of a software system written in the package specification language and produces an integration program in the form of a makefile. If complex integration tools are needed to integrate a set of components, such as remote procedure call stubs, their use is implied by the packager automatically and stub generation tools are invoked in the corresponding makefile. The programmer deals only with the components themselves and not the details of how to build the system on any given platform.

32 CFR 79.5 - Responsibilities.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Annually review and issue a child care fee policy based upon total family income (TFI) for use by programs... legislative, research, and other requirements. (c) The Heads of the DoD Components shall: (1) Establish... and implement DoD Component-specific child care fees based on the DoD-issued fee policy on an annual...

The large scale microelectronics Computer-Aided Design and Test (CADAT) system

NASA Technical Reports Server (NTRS)

Gould, J. M.

1978-01-01

The CADAT system consists of a number of computer programs written in FORTRAN that provide the capability to simulate, lay out, analyze, and create the artwork for large scale microelectronics. The function of each software component of the system is described with references to specific documentation for each software component.

Policy Issues for Integrating Parenting Interventions and Addiction Treatment for Women.

ERIC Educational Resources Information Center

VanBremen, Jane R.; Chasnoff, Ira J.

1994-01-01

This article addresses the rationale for linking addiction treatment programs and parenting education interventions in substance-abusing families. Specific components of a parenting program for women in recovery are detailed, including parenting classes and support groups, mother-child play groups, and family literacy activities. Program…

Guidelines for Cataloguing-in-Publication.

ERIC Educational Resources Information Center

Anderson, Dorothy, Comp.

The guidelines provide the criteria for the design of a national cataloguing-in-publication (CIP) program which will both be a component part of the international CIP network and fit the requirements of a specific library and publishing environment. Cataloguing-in-publication is defined, its development is traced, and current CIP programs in nine…

Inside the Black Box--An Implementation Evaluation Case Study

ERIC Educational Resources Information Center

Rector, Patricia; Bakacs, Michele; Rowe, Amy; Barbour, Bruce

2016-01-01

The case study presented in this article is an example of an implementation evaluation. The evaluation investigated significant components of the implementation of a long-term environmental educational program. Direct observation, evaluation-specific survey data, and historical data were used to determine program integrity as identified by…

Strategically Assessing International Business Course-Specific Learning Aims

ERIC Educational Resources Information Center

Kashlak, Roger; Lorenzi, Peter; Cummings, Jeffrey

2007-01-01

During the past 30 years, there have been calls for universities and business schools to internationalize curriculum, students and faculty. As most U.S. business schools have added international components to their respective programs, the assessment of these programs was subsequently recommended from accreditation and competitive perspectives. To…

The Adolescent Smoking and Health Project.

ERIC Educational Resources Information Center

Sutherland, Mary; And Others

This project was designed to specifically apply a health planning management system to a school based health education risk reduction program. Additionally, the Adolescent Smoking and Alcohol Project assisted youth in making informed decisions about the use/abuse of alcohol and cigarettes. Program components included a related knowledge base;…

Evaluation of the host specificity of Spathius galinae (Hymenoptera: Braconidae), a larval parasitoid of the emerald ash borer (Coleoptera: Buprestidae) in Northeast Asia

USDA-ARS?s Scientific Manuscript database

Host-specificity determination prior to the introduction of non-native natural enemies (predators and parasitoids) is a critical component of the risk assessment for modern classical biological control programs. In the present study, we assessed the host specificity of a newly described parasitoid,...

Development and exploratory analysis of the Neurorehabilitation Program Styles Survey.

PubMed

McCorkel, Beth A; Glueckauf, Robert L; Ecklund-Johnson, Eric P; Tomusk, Allison B; Trexler, Lance E; Diller, Leonard

2003-01-01

To develop a survey instrument that assesses implementation of key components of outpatient neurorehabilitation programs and test the capacity of this instrument to differentiate between rehabilitation approaches. The Neurorehabilitation Program Styles Survey (NPSS) was administered to 18 outpatient facilities: 10 specialized and 8 discipline-specific outpatient neurorehabilitation programs. Scores were compared between types of programs using independent samples t tests. The NPSS showed good reliability and contrasted groups validity, significantly differentiating between types of programs. The NPSS holds considerable promise as a tool for distinguishing among different types of brain injury programs, and for assessing the differential effectiveness of specialized versus discipline-specific outpatient brain rehabilitation programs. Future research on the NPSS will assess the stability of the instrument over time, its content validity, and capacity to differentiate the full continuum of neurorehabilitation programs.

Computer-Aided Modeling and Analysis of Power Processing Systems (CAMAPPS). Phase 1: Users handbook

NASA Technical Reports Server (NTRS)

Kim, S.; Lee, J.; Cho, B. H.; Lee, F. C.

1986-01-01

The EASY5 macro component models developed for the spacecraft power system simulation are described. A brief explanation about how to use the macro components with the EASY5 Standard Components to build a specific system is given through an example. The macro components are ordered according to the following functional group: converter power stage models, compensator models, current-feedback models, constant frequency control models, load models, solar array models, and shunt regulator models. Major equations, a circuit model, and a program listing are provided for each macro component.

Self-Contained Math Manual. Teacher's Guide.

ERIC Educational Resources Information Center

Grant, Shelia I.

This instructional manual consists of 11 competency-based units for a mathematics course for trade and industrial programs in Texas. Each instructional unit includes the following basic components: unit and specific objectives, notes to the instructor (outline of steps to follow in accomplishing specific objectives), information sheets,…

Web Program for Development of GUIs for Cluster Computers

NASA Technical Reports Server (NTRS)

Czikmantory, Akos; Cwik, Thomas; Klimeck, Gerhard; Hua, Hook; Oyafuso, Fabiano; Vinyard, Edward

2003-01-01

WIGLAF (a Web Interface Generator and Legacy Application Facade) is a computer program that provides a Web-based, distributed, graphical-user-interface (GUI) framework that can be adapted to any of a broad range of application programs, written in any programming language, that are executed remotely on any cluster computer system. WIGLAF enables the rapid development of a GUI for controlling and monitoring a specific application program running on the cluster and for transferring data to and from the application program. The only prerequisite for the execution of WIGLAF is a Web-browser program on a user's personal computer connected with the cluster via the Internet. WIGLAF has a client/server architecture: The server component is executed on the cluster system, where it controls the application program and serves data to the client component. The client component is an applet that runs in the Web browser. WIGLAF utilizes the Extensible Markup Language to hold all data associated with the application software, Java to enable platform-independent execution on the cluster system and the display of a GUI generator through the browser, and the Java Remote Method Invocation software package to provide simple, effective client/server networking.

Quantitative simulation of extraterrestrial engineering devices

NASA Technical Reports Server (NTRS)

Arabyan, A.; Nikravesh, P. E.; Vincent, T. L.

1991-01-01

This is a multicomponent, multidisciplinary project whose overall objective is to build an integrated database, simulation, visualization, and optimization system for the proposed oxygen manufacturing plant on Mars. Specifically, the system allows users to enter physical description, engineering, and connectivity data through a uniform, user-friendly interface and stores the data in formats compatible with other software also developed as part of this project. These latter components include: (1) programs to simulate the behavior of various parts of the plant in Martian conditions; (2) an animation program which, in different modes, provides visual feedback to designers and researchers about the location of and temperature distribution among components as well as heat, mass, and data flow through the plant as it operates in different scenarios; (3) a control program to investigate the stability and response of the system under different disturbance conditions; and (4) an optimization program to maximize or minimize various criteria as the system evolves into its final design. All components of the system are interconnected so that changes entered through one component are reflected in the others.

The 4.5 inch diameter IPV Ni-H2 cell development program

NASA Technical Reports Server (NTRS)

Miller, L.

1986-01-01

Interest in larger capacity Ni-H2 battery cells for space applications has resulted in the initiation of a development/qualification/production program. Cell component design was completed and component hardware fabricated and/or delivered. Finished cell design projections demonstrate favorable specific energies in the range of 70 to 75 Whr/Kg (32 to 34 Whr/Lb) for capacities of 100 to 250 Ah. It is further planned during this effort to evaluate the advanced cell design technology which has evolved from the work conducted at the NASA/Lewis Research Center.

The 4.5 inch diameter IPV Ni-H2 cell development program

NASA Astrophysics Data System (ADS)

Miller, L.

1986-09-01

Interest in larger capacity Ni-H2 battery cells for space applications has resulted in the initiation of a development/qualification/production program. Cell component design was completed and component hardware fabricated and/or delivered. Finished cell design projections demonstrate favorable specific energies in the range of 70 to 75 Whr/Kg (32 to 34 Whr/Lb) for capacities of 100 to 250 Ah. It is further planned during this effort to evaluate the advanced cell design technology which has evolved from the work conducted at the NASA/Lewis Research Center.

Timber net value and physical output changes following wildfire in the northern Rocky Mountains: estimates for specific fire situations

Treesearch

Patrick J. Flowers; Patricia B. Shinkle; Daria A. Cain; Thomas J. Mills

1985-01-01

In the last decade, the fire management program of the Forest Service, U.S. Department of Agriculture, has come under closer scrutiny because of ever-rising program costs. The Forest Service has responded by conducting several studies analyzing the economic efficiency of its fire management program. Some components of the analytical models have been difficult to...

General Metal Trades Book I. Units of Instruction. Teacher's Guide.

ERIC Educational Resources Information Center

East Texas State Univ., Commerce. Occupational Curriculum Lab.

This teacher's guide provides instructional materials for a 10-unit course in the General Metal Trades program. Each unit includes most or all of these basic components: performance objectives (unit and specific objectives), suggested teaching activities (a sheet outlining steps to follow to accomplish specific objectives), information sheets,…

Consolidated fuel reprocessing program

NASA Astrophysics Data System (ADS)

1985-02-01

Improved processes and components for the Breeder Reprocessing Engineering Test (BRET) were identified and developed as well as the design, procurement and development of prototypic equipment. The integrated testing of process equipment and flowsheets prototypical of a pilot scale full reprocessing plant, and also for testing prototypical remote features of specific complex components in the system are provided. Information to guide the long range activities of the Consolidated Fuel Reprocessing Program (CERP), a focal point for foreign exchange activities, and support in specialized technical areas are described. Research and development activities in HTGR fuel treatment technology are being conducted. Head-end process and laboratory scale development efforts, as well as studies specific to HTGR fuel, are reported. The development of off-gas treatment processes has generic application to fuel reprocessing, progress in this work is also reported.

Hybrid Vehicle Program. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1984-06-01

This report summarizes the activities on the Hybrid Vehicle Program. The program objectives and the vehicle specifications are reviewed. The Hybrid Vehicle has been designed so that maximum use can be made of existing production components with a minimum compromise to program goals. The program status as of the February 9-10 Hardware Test Review is presented, and discussions of the vehicle subsystem, the hybrid propulsion subsystem, the battery subsystem, and the test mule programs are included. Other program aspects included are quality assurance and support equipment. 16 references, 132 figures, 47 tables.

Aging management program of the reactor building concrete at Point Lepreau Generating Station

NASA Astrophysics Data System (ADS)

Aldea, C.-M.; Shenton, B.; Demerchant, M. M.; Gendron, T.

2011-04-01

In order for New Brunswick Power Nuclear (NBPN) to control the risks of degradation of the concrete reactor building at the Point Lepreau Generating Station (PLGS) the development of an aging management plan (AMP) was initiated. The intention of this plan was to determine the requirements for specific structural components of concrete of the reactor building that require regular inspection and maintenance to ensure the safe and reliable operation of the plant. The document is currently in draft form and presents an integrated methodology for the application of an AMP for the concrete of the reactor building. The current AMP addresses the reactor building structure and various components, such as joint sealant and liners that are integral to the structure. It does not include internal components housed within the structure. This paper provides background information regarding the document developed and the strategy developed to manage potential degradation of the concrete of the reactor building, as well as specific programs and preventive and corrective maintenance activities initiated.

Definition of 1992 Technology Aircraft Noise Levels and the Methodology for Assessing Airplane Noise Impact of Component Noise Reduction Concepts

NASA Technical Reports Server (NTRS)

Kumasaka, Henry A.; Martinez, Michael M.; Weir, Donald S.

1996-01-01

This report describes the methodology for assessing the impact of component noise reduction on total airplane system noise. The methodology is intended to be applied to the results of individual study elements of the NASA-Advanced Subsonic Technology (AST) Noise Reduction Program, which will address the development of noise reduction concepts for specific components. Program progress will be assessed in terms of noise reduction achieved, relative to baseline levels representative of 1992 technology airplane/engine design and performance. In this report, the 1992 technology reference levels are defined for assessment models based on four airplane sizes - an average business jet and three commercial transports: a small twin, a medium sized twin, and a large quad. Study results indicate that component changes defined as program final goals for nacelle treatment and engine/airframe source noise reduction would achieve from 6-7 EPNdB reduction of total airplane noise at FAR 36 Stage 3 noise certification conditions for all of the airplane noise assessment models.

Ion beam applications research. A summary of Lewis Research Center Programs

NASA Technical Reports Server (NTRS)

Banks, B. A.

1981-01-01

A summary of the ion beam applications research (IBAR) program organized to enable the development of materials, products, and processes through the nonpropulsive application of ion thruster technology is given. Specific application efforts utilizing ion beam sputter etching, deposition, and texturing are discussed as well as ion source and component technology applications.

Training Others to Lead Comprehensive School Physical Activity Programs

ERIC Educational Resources Information Center

Mosier, Brian; Heidorn, Brent

2013-01-01

The purpose of this article is to describe two unique approaches to implementing specific components of a Comprehensive School Physical Activity Program (CSPAP) in local K-12 schools. The information is presented from the lens of two physical education teacher education (PETE) faculty members who were not the individuals implementing the CSPAP,…

Component Analysis of Adherence in a Family Intervention

ERIC Educational Resources Information Center

Hill, Laura G.; Owens, Robert W.

2013-01-01

Purpose: Most studies of adherence use a single global measure to examine the relation of adherence to outcomes. These studies inform us about effects of overall implementation but not about importance of specific program elements. Previous research on the Strengthening Families Program 10-14 has shown that outcomes were unrelated to global…

Social Validity Assessment of Mindfulness Education and Practices among High School Students

ERIC Educational Resources Information Center

Luiselli, James K.; Worthen, Douglas; Carbonell, Lauren; Queen, Alexander H.

2017-01-01

The authors describe social validity assessment of mindfulness education and practices among high school students (N = 84) participating in a 10-week instructional program. The participants rated their satisfaction with and acceptance of several program components, content areas, and outcomes, as well as their engagement in specific mindfulness…

The forest and the trees: Applications for molecular markers in the Pecan Breeding Program

USDA-ARS?s Scientific Manuscript database

Inventory specific verification of accession identity is crucial to the function of the National Collection of Genetic Resources (NCGR) for Pecans and Hickories, and is an increasingly important component of the USDA ARS Pecan Breeding Program. The foundation of the NCGR is the living trees maintai...

Are All Program Elements Created Equal? Relations Between Specific Social and Emotional Learning Components and Teacher-Student Classroom Interaction Quality.

PubMed

Abry, Tashia; Rimm-Kaufman, Sara E; Curby, Timothy W

2017-02-01

School-based social and emotional learning (SEL) programs are presented to educators with little understanding of the program components that have the greatest leverage for improving targeted outcomes. Conducted in the context of a randomized controlled trial, the present study used variation in treatment teachers' (N = 143) implementation of four core components of the Responsive Classroom approach to examine relations between each component and the quality of teachers' emotional, organizational, and instructional interactions in third, fourth, and fifth grade classrooms (controlling for pre-intervention interaction quality and other covariates). We also examined the extent to which these relations varied as a function of teachers' baseline levels of interaction quality. Indices of teachers' implementation of Morning Meeting, Rule Creation, Interactive Modeling, and Academic Choice were derived from a combination of teacher-reported surveys and classroom observations. Ratings of teacher-student classroom interactions were aggregated across five observations conducted throughout the school year. Structural path models indicated that teachers' use of Morning Meeting and Academic Choice related to higher levels of emotionally supportive interactions; Academic Choice also related to higher levels of instructional interactions. In addition, teachers' baseline interaction quality moderated several associations such that the strongest relations between RC component use and interaction quality emerged for teachers with the lowest baseline interaction quality. Results highlight the value of examining individual program components toward the identification of program active ingredients that can inform intervention optimization and teacher professional development.

Characteristics of successful asthma programs.

PubMed

Clark, Noreen; Lachance, Laurie; Milanovich, Amy Friedman; Stoll, Shelley; Awad, Daniel F

2009-01-01

We identified characteristics of interventions associated with positive asthma outcomes to understand how programs can be improved. We identified asthma interventions from the peer-reviewed literature or through a nomination process for unpublished programs. Initially, we identified 532 interventions. Of those, 223 met our eligibility criteria (e.g., focus on asthma, completed an evaluation, and demonstrated at least one asthma-related health outcome) and provided information on program components and processes, administration, evaluation, and findings through telephone interviews, program documents, and published reports. We analyzed bivariate relationships between programmatic factors and outcomes using Chi-square statistics, Fisher's exact tests, and unconditional logistic regression. We confirmed findings for all programs by analyzing the subset with published results in peer-reviewed journals. Our findings indicated that programs were more likely to report a positive impact on health outcomes if they (1) were community based, (2) engaged the participation of community-based organizations, (3) provided program components in a clinical setting, (4) provided asthma training to health-care providers, (5) collaborated with other organizations and institutions and with government agencies, (6) designed a program for a specific racial/ethnic group, (7) tailored content or delivery based on individual health or educational needs, and (8) conducted environmental assessments and tailored interventions based on these assessments. Positive asthma outcomes were associated with specific program characteristics: being community centered, clinically connected, and continuously collaborative. Program developers and implementers who build these characteristics into their interventions will be more likely to realize desired asthma outcomes.

Lessons from across the pond: what the US can learn from European immunization programs.

PubMed

Freed, Gary L

2007-08-14

Childhood immunizations are the most effective clinical preventive services ever developed. Western European countries have a variety of governmental and non-governmental agencies involved in the development and operation of their immunization programs. Because of the range of programs in place across the European continent, various components of the US system parallel specific components of a variety of countries. Examining the experiences of other countries which have attempted to address issues now faced by the US can be valuable. However, such examinations are only of value if both the country and the policy itself to be examined are placed within the context of the US health care system and US policy constraints.

Engaging Men in Chronic Disease Prevention and Management Programs: A Scoping Review.

PubMed

Gavarkovs, Adam Gregory; Burke, Shauna M; Petrella, Robert J

2016-11-01

Chronic disease has become one of the largest health burdens facing the developed world. Men are at a higher risk of being diagnosed with chronic disease than women. Although lifestyle interventions have been shown to reduce the risk of chronic disease in participants, men are often underrepresented in such programs. The purpose of this study was to explore the individual-level and program-specific factors that affect male participation rates in chronic disease prevention and management (CDPM) programs. A scoping review methodology was selected, and 25 studies met the criteria for inclusion in the review. Results showed that traditional group-based programs that focused on topics such as nutrition and physical activity were often seen by men as inherently feminine, which served as a barrier for participation. Program-specific factors that attracted men to participate in interventions included a group component with like-minded men, the use of humor in the delivery of health information, the inclusion of both nutrition and physical activity components, and the presence of some manner of competition. A past negative health event, personal concern for health status, and motivation to improve physical appearance were cited by men as facilitators to CDPM program participation. Gaps in the research are identified, and results of this study can be used to inform the development of CDPM programs that will improve the engagement and participation of men. © The Author(s) 2015.

Physical fitness and job performance of firefighters.

PubMed

Rhea, Matthew R; Alvar, Brent A; Gray, Rayne

2004-05-01

Accurate correlations between a wide range of physical fitness measures and occupational demands are needed in order to identify specific fitness tests and training needs for firefighters. Twenty professional firefighters performed numerous fitness and job-related performance tests. Pearson product moment correlations were performed to identify the relationship between fitness components and job performance. Significant correlations (p <0.05) with job performance were identified for total fitness (r = -0.62), bench press strength (r = -0.66), hand grip strength (r = -0.71), bent-over row endurance (r = -0.61), bench press endurance (r = -0.73), shoulder press endurance (r = -0.71), bicep endurance (r = -0.69), squat endurance (r = -0.47), and 400-m sprint time (r = 0.79). It is apparent that firefighting taxes virtually all aspects of physical fitness. These data can help the exercise specialist choose appropriate tests and prescribe specific fitness programs for firefighters. Traditional firefighter exercise programs focusing mainly on cardiovascular fitness should be replaced with physical conditioning programs that address all components of fitness.

ENCOMPASS: A SAGA based environment for the compositon of programs and specifications, appendix A

NASA Technical Reports Server (NTRS)

Terwilliger, Robert B.; Campbell, Roy H.

1985-01-01

ENCOMPASS is an example integrated software engineering environment being constructed by the SAGA project. ENCOMPASS supports the specification, design, construction and maintenance of efficient, validated, and verified programs in a modular programming language. The life cycle paradigm, schema of software configurations, and hierarchical library structure used by ENCOMPASS is presented. In ENCOMPASS, the software life cycle is viewed as a sequence of developments, each of which reuses components from the previous ones. Each development proceeds through the phases planning, requirements definition, validation, design, implementation, and system integration. The components in a software system are modeled as entities which have relationships between them. An entity may have different versions and different views of the same project are allowed. The simple entities supported by ENCOMPASS may be combined into modules which may be collected into projects. ENCOMPASS supports multiple programmers and projects using a hierarchical library system containing a workspace for each programmer; a project library for each project, and a global library common to all projects.

Product specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 3

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the third of five volumes on Information System Life-Cycle and Documentation Standards which present a well organized, easily used standard for providing technical information needed for developing information systems, components, and related processes. This volume states the Software Management and Assurance Program documentation standard for a product specification document and for data item descriptions. The framework can be applied to any NASA information system, software, hardware, operational procedures components, and related processes.

General aviation crash safety program at Langley Research Center

NASA Technical Reports Server (NTRS)

Thomson, R. G.

1976-01-01

The purpose of the crash safety program is to support development of the technology to define and demonstrate new structural concepts for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: full-scale crash simulation testing, nonlinear structural analyses necessary to predict failure modes and collapse mechanisms of the vehicle, and evaluation of energy absorption concepts for specific component design. Both analytical and experimental methods are being used to develop expertise in these areas. Analyses include both simplified procedures for estimating energy absorption capabilities and more complex computer programs for analysis of general airframe response. Full-scale tests of typical structures as well as tests on structural components are being used to verify the analyses and to demonstrate improved design concepts.

Perceived impact of an interprofessional education program on community resilience: an exploratory study.

PubMed

Slack, Marion Kimball; McEwen, Marylyn Morris

2013-09-01

The purpose of this study was to explore the perceived impact of an interprofessional education (IPE) program for health sciences students on two culturally diverse, underserved communities. A community resilience/capacity framework, consisting of catalysts (primarily the creation of awareness) and capital components: human (workforce development), social (networking and empowerment) and economic (volunteer labor and money spent by the program), provided the conceptual underpinnings for the study. Focus groups with stakeholders in two communities, one rural and one metropolitan, were audio-recorded, transcribed and analyzed by categorizing data according to each capital component. In addition to the concepts contained in the capacity framework a new category, informational capital (data specific to the community) emerged during the analysis. We suggest that by acting as a catalyst a community based interprofessional program can affect components of community resilience/capacity, primarily human, social, and informational capital. Using the community resilience/capacity framework facilitated exploration of the perceived impact of an educational program on one rural and one urban underserved community beyond assessing student outcomes or number of clients served.

Fine-Tuning Summer Research Programs to Promote Underrepresented Students’ Persistence in the STEM Pathway

PubMed Central

Ghee, Medeva; Keels, Micere; Collins, Deborah; Neal-Spence, Cynthia; Baker, Earnestine

2016-01-01

Although the importance of undergraduate research experiences in preparing students for graduate study and research careers is well documented, specific examination of program components is needed to assess the impact of these programs on underrepresented (UR) students. The Leadership Alliance, a consortium of leading PhD-granting and minority-serving institutions (MSIs), has leveraged its diverse partnership to place UR students from MSI and non-MSI institutions in competitive research environments through its national Summer Research Early Identification Program. Using longitudinal pre/post data collected from student surveys, we applied social cognitive career theory as a conceptual framework to examine how research engagement, skill development, and mentorship aspects of a summer research program affect students’ commitment to pursue research careers. Self-reported knowledge of research skills, time engaged in research activity, and students’ understanding of and attitudes toward pursuing graduate study were measured in relation to the classification of students’ home undergraduate institution, level of students’ pre-existing research experience, and demographic factors. Our results provide evidence of specific programmatic components that are beneficial for UR students from varying academic and cultural backgrounds. This study describes important aspects of summer research programs that will contribute to students’ ability to persist in science careers. PMID:27496359

An overview of fatigue failures at the Rocky Flats Wind System Test Center

NASA Technical Reports Server (NTRS)

Waldon, C. A.

1981-01-01

Potential small wind energy conversion (SWECS) design problems were identified to improve product quality and reliability. Mass produced components such as gearboxes, generators, bearings, etc., are generally reliable due to their widespread uniform use in other industries. The likelihood of failure increases, though, in the interfacing of these components and in SWECS components designed for a specific system use. Problems relating to the structural integrity of such components are discussed and analyzed with techniques currently used in quality assurance programs in other manufacturing industries.

Revealing the Structural Complexity of Component Interactions of Topic-Specific PCK when Planning to Teach

NASA Astrophysics Data System (ADS)

Mavhunga, Elizabeth

2018-04-01

Teaching pedagogical content knowledge (PCK) at a topic-specific level requires clarity on the content-specific nature of the components employed, as well as the specific features that bring about the desirable depth in teacher explanations. Such understanding is often hazy; yet, it influences the nature of teacher tasks and learning opportunities afforded to pre-service teachers in a teaching program. The purpose of this study was twofold: firstly, to illuminate the emerging complexity when content-specific components of PCK interact when planning to teach a chemistry topic; and secondly, to identify the kinds of teacher tasks that promote the emergence of such complexity. Data collected were content representations (CoRes) in chemical equilibrium accompanied by expanded lesson outlines from 15 pre-service teachers in their final year of study towards a first degree in teaching (B Ed). The analysis involved extraction of episodes that exhibited component interaction by using a qualitative in-depth analysis method. The results revealed the structure in which the components of PCK in a topic interact among each other to be linear, interwoven, or a combination of the two. The interwoven interactions contained multiple components that connected explanations on different aspects of a concept, all working in a complementary manner. The most sophisticated component interactions emerged from teacher tasks on descriptions of a lesson sequence and a summary of a lesson. Recommendations in this study highlight core practices for making pedagogical transformation of topic content knowledge more accessible.

The ABPN Maintenance of Certification Program for Psychiatrists: Past History, Current Status, and Future Directions

ERIC Educational Resources Information Center

Faulkner, Larry R.; Tivnan, Patricia W.; Winstead, Daniel K.; Reus, Victor I.; Andrade, Naleen N.; Brooks, Beth Ann; Colenda, Christopher C.; Mrazek, David A.; Reifler, Burton V.; Schneidman, Barbara

2008-01-01

Objective: To describe the American Board of Psychiatry and Neurology (ABPN) Maintenance of Certification Program, its underlying rationale, how it will be implemented now, and what it might look like in the future. Methods: The authors describe the philosophical foundation, specific components, and the implementation timeline of the ABPN…

Extensiveness--Accuracy of Parent Information about Virginia Beach 45-15 Pilot Program.

ERIC Educational Resources Information Center

Schlechty Associates, Chapel Hill, NC.

A preliminary analysis of parent responses to questions related to factual information about the Virginia Beach 45-15 pilot elementary school program, where students attend classes 45 days and break 15 days year round, is provided. Specifically, the information component of the Virginia Beach 45-15 Pilot Project Questionnaire, which consists of…

The pillars of well-constructed simulated patient programs: A qualitative study with experienced educators.

PubMed

Pritchard, Shane A; Blackstock, Felicity C; Keating, Jennifer L; Nestel, Debra

2017-11-01

The inclusion of simulated patients (SPs) in health professional education is growing internationally. However, there is limited evidence for best practice in SP methodology. This study investigated how experienced SP educators support SPs in providing SP-based education for health professional students. Experienced SP educators were identified via relevant professional associations, peer-reviewed publications, and peer referral. Semi-structured individual interviews were conducted via telephone. Data were analyzed independently by three researchers using principles of inductive thematic analysis. Four themes were identified that represent the key structural components of SP programs considered by educators seeking to optimize learning for health professional students in SP programs: managing SPs by operationalizing an effective program, selecting SPs by rigorously screening for suitability, preparing SPs by educating for a specific scenario, and directing SPs by leading safe and meaningful interactions. Within these components, subthemes were described, with considerable variation in approaches. Key structural components to SP programs were consistently described by experienced SP educators who operationalize them. A framework has been proposed to assist educators in designing high-quality SP programs that support SPs and learners. Future research is required to evaluate and refine this framework and other evidence-based resources for SP educators.

Effectiveness of substance abuse treatment programming for women: a review.

PubMed

Ashley, Olivia Silber; Marsden, Mary Elen; Brady, Thomas M

2003-01-01

Recent research has shown that women and men differ in substance abuse etiology, disease progression, and access to treatment for substance abuse. Substance abuse treatment specifically designed for women has been proposed as one way to meet women's distinctive needs and reduce barriers to their receiving and remaining in treatment. However, relatively few substance abuse treatment programs offer specialized services for women, and effectiveness has not been fully evaluated. This article reviews the literature on the extent and effectiveness of substance abuse treatment programming for women and provides an overview of what is known about the components of successful treatment programs for women. Thirty-eight studies of the effect on treatment outcomes of substance abuse treatment programming for women were reviewed. Seven were randomized, controlled trials, and 31 were nonrandomized studies. In our review, six components of substance abuse treatment programming for women were examined: child care, prenatal care, women-only programs, supplemental services and workshops that address women-focused topics, mental health programming, and comprehensive programming. The studies found positive associations between these six components and treatment completion, length of stay, decreased use of substances, reduced mental health symptoms, improved birth outcomes, employment, self-reported health status, and HIV risk reduction. These findings suggest that to improve the future health and well-being of women and their children, there is a continued need for well-designed studies of substance abuse treatment programming for women.

Planning and development of the Better Bites program: a pricing manipulation strategy to improve healthy eating in a hospital cafeteria.

PubMed

Liebert, Mina L; Patsch, Amy J; Smith, Jennifer Howard; Behrens, Timothy K; Charles, Tami; Bailey, Taryn R

2013-07-01

The Better Bites program, a hospital cafeteria nutrition intervention strategy, was developed by combining evidence-based practices with hospital-specific formative research, including key informant interviews, the Nutrition Environment Measures Study in Restaurants, hospital employee surveys, and nutrition services staff surveys. The primary program components are pricing manipulation and marketing to promote delicious, affordable, and healthy foods to hospital employees and other cafeteria patrons. The pricing manipulation component includes decreasing the price of the healthy items and increasing the price of the unhealthy items using a 35% price differential. Point-of-purchase marketing highlights taste, cost, and health benefits of the healthy items. The program aims to increase purchases of healthy foods and decrease purchases of unhealthy foods, while maintaining revenue neutrality. This article addresses the formative research, planning, and development that informed the Better Bites program.

Bioenergy Feedstock Development Program Status Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kszos, L.A.

2001-02-09

The U.S. Department of Energy's (DOE's) Bioenergy Feedstock Development Program (BFDP) at Oak Ridge National Laboratory (ORNL) is a mission-oriented program of research and analysis whose goal is to develop and demonstrate cropping systems for producing large quantities of low-cost, high-quality biomass feedstocks for use as liquid biofuels, biomass electric power, and/or bioproducts. The program specifically supports the missions and goals of DOE's Office of Fuels Development and DOE's Office of Power Technologies. ORNL has provided technical leadership and field management for the BFDP since DOE began energy crop research in 1978. The major components of the BFDP include energymore » crop selection and breeding; crop management research; environmental assessment and monitoring; crop production and supply logistics operational research; integrated resource analysis and assessment; and communications and outreach. Research into feedstock supply logistics has recently been added and will become an integral component of the program.« less

A simulation model for wind energy storage systems. Volume 1: Technical report

NASA Technical Reports Server (NTRS)

Warren, A. W.; Edsinger, R. W.; Chan, Y. K.

1977-01-01

A comprehensive computer program for the modeling of wind energy and storage systems utilizing any combination of five types of storage (pumped hydro, battery, thermal, flywheel and pneumatic) was developed. The level of detail of Simulation Model for Wind Energy Storage (SIMWEST) is consistent with a role of evaluating the economic feasibility as well as the general performance of wind energy systems. The software package consists of two basic programs and a library of system, environmental, and load components. The first program is a precompiler which generates computer models (in FORTRAN) of complex wind source storage application systems, from user specifications using the respective library components. The second program provides the techno-economic system analysis with the respective I/O, the integration of systems dynamics, and the iteration for conveyance of variables. SIMWEST program, as described, runs on the UNIVAC 1100 series computers.

A simulation model for wind energy storage systems. Volume 2: Operation manual

NASA Technical Reports Server (NTRS)

Warren, A. W.; Edsinger, R. W.; Burroughs, J. D.

1977-01-01

A comprehensive computer program (SIMWEST) developed for the modeling of wind energy/storage systems utilizing any combination of five types of storage (pumped hydro, battery, thermal, flywheel, and pneumatic) is described. Features of the program include: a precompiler which generates computer models (in FORTRAN) of complex wind source/storage/application systems, from user specifications using the respective library components; a program which provides the techno-economic system analysis with the respective I/O the integration of system dynamics, and the iteration for conveyance of variables; and capability to evaluate economic feasibility as well as general performance of wind energy systems. The SIMWEST operation manual is presented and the usage of the SIMWEST program and the design of the library components are described. A number of example simulations intended to familiarize the user with the program's operation is given along with a listing of each SIMWEST library subroutine.

C-Language Integrated Production System, Version 6.0

NASA Technical Reports Server (NTRS)

Riley, Gary; Donnell, Brian; Ly, Huyen-Anh Bebe; Ortiz, Chris

1995-01-01

C Language Integrated Production System (CLIPS) computer programs are specifically intended to model human expertise or other knowledge. CLIPS is designed to enable research on, and development and delivery of, artificial intelligence on conventional computers. CLIPS 6.0 provides cohesive software tool for handling wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming: representation of knowledge as heuristics - essentially, rules of thumb that specify set of actions performed in given situation. Object-oriented programming: modeling of complex systems comprised of modular components easily reused to model other systems or create new components. Procedural-programming: representation of knowledge in ways similar to those of such languages as C, Pascal, Ada, and LISP. Version of CLIPS 6.0 for IBM PC-compatible computers requires DOS v3.3 or later and/or Windows 3.1 or later.

Printed wiring board system programmer's manual

NASA Technical Reports Server (NTRS)

Brinkerhoff, C. D.

1973-01-01

The printed wiring board system provides automated techniques for the design of printed circuit boards and hybrid circuit boards. The system consists of four programs: (1) the preprocessor program combines user supplied data and pre-defined library data to produce the detailed circuit description data; (2) the placement program assigns circuit components to specific areas of the board in a manner that optimizes the total interconnection length of the circuit; (3) the organizer program assigns pin interconnections to specific board levels and determines the optimal order in which the router program should attempt to layout the paths connecting the pins; and (4) the router program determines the wire paths which are to be used to connect each input pin pair on the circuit board. This document is intended to serve as a programmer's reference manual for the printed wiring board system. A detailed description of the internal logic and flow of the printed wiring board programs is included.

Library staff development course.

PubMed Central

Eaton, E K

1981-01-01

The Moody Medical Library at the University of Texas Medical Branch plans, presents, and evaluates regularly a staff development program for its employees, including librarians and clerical and technical staff. The program's purpose is to provide continuing education for the library staff while concurrently: (1) providing information concerning specific library services and programs; (2) illustrating the interrelationship of the departments and divisions within the library; (3) developing a sense of teamwork and loyalty; and (4) developing job pride. Staff member volunteers teach the various courses. An integral part of the program is an evaluation of the efficacy of its various components using a form developed specifically for this purpose. Participants give the majority of courses an effectiveness rating of 90% or above. PMID:7248595

Protegiendo Nuestra Comunidad: empowerment participatory education for HIV prevention.

PubMed

McQuiston, C; Choi-Hevel, S; Clawson, M

2001-10-01

To be effective, HIV/AIDS interventions must be culturally and linguistically appropriate and must occur within the context of the specific community in which they are delivered. In this article, the development of a culture-specific lay health advisor (LHA) program, Protegiendo Nuestra Comunidad, for recently immigrated Mexicans is described. This program is one component of a collaborative inquiry research project involving community participants and researchers working as partners in carrying out and assessing a program for the prevention of HIV/AIDS. The collaborative inquiry process was applied as an empowerment philosophy and methodology of Paulo Freire and an ecological framework was used for the development of Protegiendo Nuestra Comunidad. The use of principles of empowerment for curriculum development, teaching methodology, and program delivery are described.

Documentation of a computer program to simulate aquifer-system compaction using the modular finite-difference ground-water flow model

USGS Publications Warehouse

Leake, S.A.; Prudic, David E.

1988-01-01

The process of permanent compaction is not routinely included in simulations of groundwater flow. To simulate storage changes from both elastic and inelastic compaction, a computer program was written for use with the U. S. Geological Survey modular finite-difference groundwater flow model. The new program is called the Interbed-Storage Package. In the Interbed-Storage Package, elastic compaction or expansion is assumed to be proportional to change in head. The constant of proportionality is the product of skeletal component of elastic specific storage and thickness of the sediments. Similarly, inelastic compaction is assumed to be proportional to decline in head. The constant of proportionality is the product of the skeletal component of inelastic specific storage and the thickness of the sediments. Storage changes are incorporated into the groundwater flow model by adding an additional term to the flow equation. Within a model time step, the package appropriately apportions storage changes between elastic and inelastic components on the basis of the relation of simulated head to the previous minimum head. Another package that allows for a time-varying specified-head boundary is also documented. This package was written to reduce the data requirements for test simulations of the Interbed-Storage Package. (USGS)

CCARES: A computer algorithm for the reliability analysis of laminated CMC components

NASA Technical Reports Server (NTRS)

Duffy, Stephen F.; Gyekenyesi, John P.

1993-01-01

Structural components produced from laminated CMC (ceramic matrix composite) materials are being considered for a broad range of aerospace applications that include various structural components for the national aerospace plane, the space shuttle main engine, and advanced gas turbines. Specifically, these applications include segmented engine liners, small missile engine turbine rotors, and exhaust nozzles. Use of these materials allows for improvements in fuel efficiency due to increased engine temperatures and pressures, which in turn generate more power and thrust. Furthermore, this class of materials offers significant potential for raising the thrust-to-weight ratio of gas turbine engines by tailoring directions of high specific reliability. The emerging composite systems, particularly those with silicon nitride or silicon carbide matrix, can compete with metals in many demanding applications. Laminated CMC prototypes have already demonstrated functional capabilities at temperatures approaching 1400 C, which is well beyond the operational limits of most metallic materials. Laminated CMC material systems have several mechanical characteristics which must be carefully considered in the design process. Test bed software programs are needed that incorporate stochastic design concepts that are user friendly, computationally efficient, and have flexible architectures that readily incorporate changes in design philosophy. The CCARES (Composite Ceramics Analysis and Reliability Evaluation of Structures) program is representative of an effort to fill this need. CCARES is a public domain computer algorithm, coupled to a general purpose finite element program, which predicts the fast fracture reliability of a structural component under multiaxial loading conditions.

Managing aging in nuclear power plants: Insights from NRC maintenance team inspection reports

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fresco, A.; Subudhi, M.; Gunther, W.

1993-12-01

A plant`s maintenance program is the principal vehicle through which age-related degradation is managed. From 1988 to 1991, the NRC evaluated the maintenance program of every nuclear power plant in the United States. Forty-four out of a total of 67 of the reports issued on these in-depth team inspections were reviewed for insights into the strengths and weaknesses of the programs as related to the need to understand and manage the effects of aging on nuclear plant systems, structures, and components. Relevant information was extracted from these inspection reports and sorted into several categories, including Specific Aging Insights, Preventive Maintenance,more » Predictive Maintenance and Condition Monitoring, Post Maintenance Testing, Failure Trending, Root Cause Analysis and Usage of Probabilistic Risk Assessment in the Maintenance Process. Specific examples of inspection and monitoring techniques successfully used by utilities to detect degradation due to aging have been identified. The information also was sorted according to systems and components, including: Auxiliary Feedwater, Main Feedwater, High Pressure Injection for both BWRs and PWRs, Service Water, Instrument Air, and Emergency Diesel Generator Air Start Systems, and Emergency Diesel Generators Air Start Systems, emergency diesel generators, electrical components such as switchgear, breakers, relays, and motor control centers, motor operated valves and check valves. This information was compared to insights gained from the Nuclear Plant Aging Research (NPAR) Program. Attributes of plant maintenance programs where the NRC inspectors felt that improvement was needed to properly address the aging issue also are discussed.« less

Mountain-Plains Handbook: The Design and Operation of a Residential Family Based Education Program. Appendix. Supplement III to Volume 7. Preparing the Student: The Education Services Division.

ERIC Educational Resources Information Center

Mutterer, Richard H.

One of three supplements which accompany chapter 7 of "Mountain-Plains Handbook: The Design and Operation of a Residential, Family Oriented Career Education Model" (CE 014 630), this document contains specific information concerning the mobility and transportation component and marketing and tourism component of the educational services…

Pipe degradation investigations for optimization of flow-accelerated corrosion inspection location selection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chandra, S.; Habicht, P.; Chexal, B.

1995-12-01

A large amount of piping in a typical nuclear power plant is susceptible to Flow-Accelerated Corrosion (FAC) wall thinning to varying degrees. A typical PAC monitoring program includes the wall thickness measurement of a select number of components in order to judge the structural integrity of entire systems. In order to appropriately allocate resources and maintain an adequate FAC program, it is necessary to optimize the selection of components for inspection by focusing on those components which provide the best indication of system susceptibility to FAC. A better understanding of system FAC predictability and the types of FAC damage encounteredmore » can provide some of the insight needed to better focus and optimize the inspection plan for an upcoming refueling outage. Laboratory examination of FAC damaged components removed from service at Northeast Utilities` (NU) nuclear power plants provides a better understanding of the damage mechanisms involved and contributing causes. Selected results of this ongoing study are presented with specific conclusions which will help NU to better focus inspections and thus optimize the ongoing FAC inspection program.« less

The ABPN Maintenance of Certification Program for psychiatrists: past history, current status, and future directions.

PubMed

Faulkner, Larry R; Tivnan, Patricia W; Winstead, Daniel K; Reus, Victor I; Andrade, Naleen N; Brooks, Beth Ann; Colenda, Christopher C; Mrazek, David A; Reifler, Burton V; Schneidman, Barbara

2008-01-01

To describe the American Board of Psychiatry and Neurology (ABPN) Maintenance of Certification Program, its underlying rationale, how it will be implemented now, and what it might look like in the future. The authors describe the philosophical foundation, specific components, and the implementation timeline of the ABPN Maintenance of Certification Program; the development of specific products that might be used by ABPN diplomates to meet its requirements; and several unanswered questions about its current status and future development. The ABPN Maintenance of Certification Program consists of specific requirements pertaining to professional standing, self-assessment and lifelong learning, performance in practice, and cognitive expertise that will be implemented incrementally over the next decade. The ABPN Maintenance of Certification Program has been implemented in a manner that is as consistent as possible with its underlying philosophical beliefs as well as the current and expected public and political concerns, diplomate needs, and the requirements of organizations responsible for licensure, credentialing, privileging, accreditation, professional development, and physician reimbursement.

Drug Research

NASA Technical Reports Server (NTRS)

1989-01-01

NBOD2, a program developed at Goddard Space Flight Center to solve equations of motion coupled N-body systems is used by E.I. DuPont de Nemours & Co. to model potential drugs as a series of elements. The program analyses the vibrational and static motions of independent components in drugs. Information generated from this process is used to design specific drugs to interact with enzymes in designated ways.

A Study of the Perceived Value Placed on the National Accreditation of Teacher and Educator Training Programs in American Colleges

ERIC Educational Resources Information Center

Shim, Holly S.

2012-01-01

Literature reveals that accreditation in the United States (U.S.) is a vital component of accountability to the higher education community. However, there is limited research on accreditation, specifically on the national accreditation of teacher and educator training programs. Therefore, this study is warranted in examining the perceived value…

Developing the Art of Becoming a Couple: A Grounded Theory Study of the Positive Influence of "Married and Loving It!"[R

ERIC Educational Resources Information Center

Petty, Barbara D.

2010-01-01

Couples can improve their marriages by implementing relationship building skills they learn while participating in a marriage education program. This study addresses how marriages improved as a result of participating in the marriage education program, Married and Loving It![R] and what specific components of the learning experience facilitated…

"Compassion, pleasantry, and hope": a process evaluation of a volunteer-based nonprofit.

PubMed

Mye, Sarah C; Moracco, Kathryn E

2015-06-01

As funders continue to emphasize the importance of documented results, nonprofit organizations must work to complete program evaluations that are both valuable and feasible. The purpose of this paper is to document a practical process evaluation of a southeastern nonprofit, a local Meals on Wheels. Using a mixed methods approach, we sought to answer four evaluation questions: (1) What are the essential program components, as identified by key stakeholders; (2) To what extent are volunteers implementing the identified essential components as intended; (3) What is the level of volunteer satisfaction with the program; and (4) What suggestions do stakeholders have for improving the program? Our findings indicate that most aspects of the program were implemented as intended, but inconsistencies occurred when volunteers were unsure of their assigned duties. In addition, volunteers had high levels of satisfaction and specific suggestions for improvement. From these results, we developed a conceptual model of factors contributing to quality of implementation and volunteer satisfaction that may be generalizable to other volunteer-based nonprofits. Specifically, we identified three factors that helped to facilitate satisfaction and performance: leadership, social contact, and fulfillment. Finally, this process evaluation demonstrates the feasibility of developing and implementing evaluation tools in similar organizations. Copyright © 2015 Elsevier Ltd. All rights reserved.

INCREASING ACHIEVEMENT AND HIGHER-EDUCATION REPRESENTATION OF UNDER-REPRESENTED GROUPS IN SCIENCE, TECHNOLOGY, ENGINEERING, AND MATHEMATICS FIELDS: A REVIEW OF CURRENT K-12 INTERVENTION PROGRAMS.

PubMed

Valla, Jeffrey M; Williams, Wendy M

2012-01-01

The under-representation of women and ethnic minorities in Science, Technology, Engineering, and Mathematics (STEM) education and professions has resulted in a loss of human capital for the US scientific workforce and spurred the development of myriad STEM educational intervention programs. Increased allocation of resources to such programs begs for a critical, prescriptive, evidence-based review that will enable researchers to develop optimal interventions and administrators to maximize investments. We begin by providing a theoretical backdrop for K-12 STEM programs by reviewing current data on under-representation and developmental research describing individual-level social factors undergirding these data. Next, we review prototypical designs of these programs, highlighting specific programs in the literature as examples of program structures and components currently in use. We then evaluate these interventions in terms of overall effectiveness, as a function of how well they address age-, ethnicity-, or gender-specific factors, suggesting improvements in program design based on these critiques. Finally, program evaluation methods are briefly reviewed and discussed in terms of how their empirical soundness can either enable or limit our ability to delineate effective program components. "Now more than ever, the nation's changing demographics demand that we include all of our citizens in science and engineering education and careers. For the U.S. to benefit from the diverse talents of all its citizens, we must grow the pipeline of qualified, underrepresented minority engineers and scientists to fill positions in industry and academia."-Irving P. McPhail..

Beyond Widgets -- Systems Incentive Programs for Utilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Regnier, Cindy; Mathew, Paul; Robinson, Alastair

Utility incentive programs remain one of the most significant means of deploying commercialized, but underutilized building technologies to scale. However, these programs have been largely limited to component-based products (e.g., lamps, RTUs). While some utilities do provide ‘custom’ incentive programs with whole building and system level technical assistance, these programs require deeper levels of analysis, resulting in higher program costs. This results in custom programs being restricted to utilities with greater resources, and are typically applied mainly to large or energy-intensive facilities, leaving much of the market without cost effective access and incentives for these solutions. In addition, with increasinglymore » stringent energy codes, cost effective component-based solutions that achieve significant savings are dwindling. Building systems (e.g., integrated façade, HVAC and/or lighting solutions) can deliver higher savings that translate into large sector-wide savings if deployed at the scale of these programs. However, systems application poses a number of challenges – baseline energy use must be defined and measured; the metrics for energy and performance must be defined and tested against; in addition, system savings must be validated under well understood conditions. This paper presents a sample of findings of a project to develop validated utility incentive program packages for three specific integrated building systems, in collaboration with Xcel Energy (CO, MN), ComEd, and a consortium of California Public Owned Utilities (CA POUs) (Northern California Power Agency(NCPA) and the Southern California Public Power Authority(SCPPA)). Furthermore, these program packages consist of system specifications, system performance, M&V protocols, streamlined assessment methods, market assessment and implementation guidance.« less

INCREASING ACHIEVEMENT AND HIGHER-EDUCATION REPRESENTATION OF UNDER-REPRESENTED GROUPS IN SCIENCE, TECHNOLOGY, ENGINEERING, AND MATHEMATICS FIELDS: A REVIEW OF CURRENT K-12 INTERVENTION PROGRAMS

PubMed Central

Valla, Jeffrey M.; Williams, Wendy M.

2012-01-01

The under-representation of women and ethnic minorities in Science, Technology, Engineering, and Mathematics (STEM) education and professions has resulted in a loss of human capital for the US scientific workforce and spurred the development of myriad STEM educational intervention programs. Increased allocation of resources to such programs begs for a critical, prescriptive, evidence-based review that will enable researchers to develop optimal interventions and administrators to maximize investments. We begin by providing a theoretical backdrop for K-12 STEM programs by reviewing current data on under-representation and developmental research describing individual-level social factors undergirding these data. Next, we review prototypical designs of these programs, highlighting specific programs in the literature as examples of program structures and components currently in use. We then evaluate these interventions in terms of overall effectiveness, as a function of how well they address age-, ethnicity-, or gender-specific factors, suggesting improvements in program design based on these critiques. Finally, program evaluation methods are briefly reviewed and discussed in terms of how their empirical soundness can either enable or limit our ability to delineate effective program components. “Now more than ever, the nation’s changing demographics demand that we include all of our citizens in science and engineering education and careers. For the U.S. to benefit from the diverse talents of all its citizens, we must grow the pipeline of qualified, underrepresented minority engineers and scientists to fill positions in industry and academia.”—Irving P. McPhail.. PMID:22942637

Shuttle filter study. Volume 2: Contaminant generation and sensitivity studies

NASA Technical Reports Server (NTRS)

1974-01-01

Contaminant generation studies were conducted at the component level using two different methods, radioactive tracer technique and gravimetric analysis test procedure. Both of these were reduced to practice during this program. In the first of these methods, radioactively tagged components typical of those used in spacecraft were studied to determine their contaminant generation characteristics under simulated operating conditions. Because the purpose of the work was: (1) to determine the types and quantities of contaminants generated; and (2) to evaluate improved monitoring and detection schemes, no attempt was made to evaluate or qualify specific components. The components used in this test program were therefore not flight hardware items. Some of them had been used in previous tests; some were obsolete; one was an experimental device. In addition to the component tests, various materials of interest to contaminant and filtration studies were irradiated and evaluated for use as autotracer materials. These included test dusts, plastics, valve seat materials, and bearing cage materials.

Radiation oncology and medical physicists quality assurance in British Columbia Cancer Agency Provincial Prostate Brachytherapy Program.

PubMed

Keyes, Mira; Morris, William James; Spadinger, Ingrid; Araujo, Cynthia; Cheung, Arthur; Chng, Nick; Crook, Juanita; Halperin, Ross; Lapointe, Vince; Miller, Stacy; Pai, Howard; Pickles, Tom

2013-01-01

To describe in detail British Columbia (BC) Cancer Agency (BCCA) Provincial Prostate Brachytherapy (PB) Quality Assurance (QA) Program. The BCCA PB Program was established in 1997. It operates as one system, unified and supported by electronic and information systems, making it a single PB treatment provider for province of BC and Yukon. To date, >4000 patients have received PB (450 implants in 2011), making it the largest program in Canada. The Program maintains a large provincial prospective electronic database with records on all patients, including disease characteristics, risk stratification, pathology, preplan and postimplant dosimetric data, follow-up of prostate-specific antigen, and toxicity outcomes. QA was an integral part of the program since its inception. A formal QA Program was established in 2002, with key components that include: unified eligibility criteria and planning system, comprehensive database, physics and oncologist training and mentorship programs, peer review process, individual performance outcomes and feedback process, structured continuing education and routine assessment of the program's dosimetry, toxicity and prostate-specific antigen outcomes, administration and program leadership that promotes a strong culture of patient safety. The emphasis on creating a robust, broad-based network of skilled providers has been achieved by the program's requirements for training, education, and the QA process. The formal QA process is considered a key factor for the success of cancer control outcomes achieved at BCCA. Although this QA model may not be wholly transferable to all PB programs, some of its key components may be applicable to other programs to ensure quality in PB and patient safety. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.

Improving Science Teacher Preparation through the APS PhysTEC and NSF Noyce Programs

NASA Astrophysics Data System (ADS)

Williams, Tasha; Tyler, Micheal; van Duzor, Andrea; Sabella, Mel

2013-03-01

Central to the recruitment of students into science teaching at a school like CSU, is a focus on the professional nature of teaching. The purpose of this focus is twofold: it serves to change student perceptions about teaching and it prepares students to become teachers who value continued professional development and value the science education research literature. The Noyce and PhysTEC programs at CSU place the professional nature of teaching front and center by involving students in education research projects, paid internships, attendance at conferences, and participation in a new Teacher Immersion Institute and a Science Education Journal Reading Class. This poster will focus on specific components of our teacher preparation program that were developed through these two programs. In addition we will describe how these new components provide students with diverse experiences in the teaching of science to students in the urban school district. Supported by the NSF Noyce Program (0833251) and the APS PhysTEC Program.

VERIFICATION OF HIGH-RATE DISINFECTION TECHNOLOGIES FOR WET-WEATHER FLOWS

EPA Science Inventory

This paper describes the critical components of the USEPA's Environmental Technology Verification Program for two specific technologies categories: ultraviolet disinfection technologies for treating combined sewer overflow (CSO) and sanitary sewer overflow (SSO), and; induction m...

Energy Efficient Engine Flight Propulsion System Preliminary Analysis and Design Report

NASA Technical Reports Server (NTRS)

Bisset, J. W.; Howe, D. C.

1983-01-01

The final design and analysis of the flight propulsion system is presented. This system is the conceptual study engine defined to meet the performance, economic and environmental goals established for the Energy Efficient Engine Program. The design effort included a final definition of the engine, major components, internal subsystems, and nacelle. Various analytical representations and results from component technology programs are used to verify aerodynamic and structural design concepts and to predict performance. Specific design goals and specifications, reflecting future commercial aircraft propulsion system requirements for the mid-1980's, are detailed by NASA and used as guidelines during engine definition. Information is also included which details salient results from a separate study to define a turbofan propulsion system, known as the maximum efficiency engine, which reoptimized the advanced fuel saving technologies for improved fuel economy and direct operating costs relative to the flight propulsion system.

The NOAA Integrated Surface Irradiance Study (ISIS)-A New Surface Radiation Monitoring Program.

NASA Astrophysics Data System (ADS)

Hicks, B. B.; Deluisi, J. J.; Matt, D. R.

1996-12-01

This paper describes a new radiation monitoring program, the Integrated Surface Irradiance Study (ISIS), that builds upon and takes over from earlier NOAA networks monitoring components of solar radiation [both the visible component (SOLRAD) and the shortwave component that causes sunburn, UV-B] across the continental United States. ISIS is implemented in two levels. Level 1 addresses incoming radiation only, and level 2 addresses the surface radiation balance. Level 2 also constitutes the SURFRAD (Surface Radiation) program of the NOAA Office of Global Programs, specifically intended to provide radiation data to support large-scale hydrologic studies that will be conducted under the Global Energy and Water Cycle Experiment. Eventually, it is planned for level 2 sites to monitor all components of the surface energy balance. Both levels of ISIS will eventually measure both visible and UV radiation components. At present, there are nine sites that are considered to be at ISIS level 1 standard and an additional four level 2 SURFRAD sites. A 10th level 1 site will be in operation soon. Plans call for an increase in the number of sites of both kinds, up to about 15 ISIS sites, of which 6 will be at the SURFRAD level. Data are available via FTP at ftp.atdd.noaa.govlpublisis or at http://www.srrb.noaa.gov (level 2).

A preliminary report of music-based training for adult cochlear implant users: Rationales and development.

PubMed

Gfeller, Kate; Guthe, Emily; Driscoll, Virginia; Brown, Carolyn J

2015-09-01

This paper provides a preliminary report of a music-based training program for adult cochlear implant (CI) recipients. Included in this report are descriptions of the rationale for music-based training, factors influencing program development, and the resulting program components. Prior studies describing experience-based plasticity in response to music training, auditory training for persons with hearing impairment, and music training for CI recipients were reviewed. These sources revealed rationales for using music to enhance speech, factors associated with successful auditory training, relevant aspects of electric hearing and music perception, and extant evidence regarding limitations and advantages associated with parameters for music training with CI users. This informed the development of a computer-based music training program designed specifically for adult CI users. Principles and parameters for perceptual training of music, such as stimulus choice, rehabilitation approach, and motivational concerns were developed in relation to the unique auditory characteristics of adults with electric hearing. An outline of the resulting program components and the outcome measures for evaluating program effectiveness are presented. Music training can enhance the perceptual accuracy of music, but is also hypothesized to enhance several features of speech with similar processing requirements as music (e.g., pitch and timbre). However, additional evaluation of specific training parameters and the impact of music-based training on speech perception of CI users is required.

A preliminary report of music-based training for adult cochlear implant users: rationales and development

PubMed Central

Gfeller, Kate; Guthe, Emily; Driscoll, Virginia; Brown, Carolyn J.

2015-01-01

Objective This paper provides a preliminary report of a music-based training program for adult cochlear implant (CI) recipients. Included in this report are descriptions of the rationale for music-based training, factors influencing program development, and the resulting program components. Methods Prior studies describing experience-based plasticity in response to music training, auditory training for persons with hearing impairment, and music training for cochlear implant recipients were reviewed. These sources revealed rationales for using music to enhance speech, factors associated with successful auditory training, relevant aspects of electric hearing and music perception, and extant evidence regarding limitations and advantages associated with parameters for music training with CI users. This information formed the development of a computer-based music training program designed specifically for adult CI users. Results Principles and parameters for perceptual training of music, such as stimulus choice, rehabilitation approach, and motivational concerns were developed in relation to the unique auditory characteristics of adults with electric hearing. An outline of the resulting program components and the outcome measures for evaluating program effectiveness are presented. Conclusions Music training can enhance the perceptual accuracy of music, but is also hypothesized to enhance several features of speech with similar processing requirements as music (e.g., pitch and timbre). However, additional evaluation of specific training parameters and the impact of music-based training on speech perception of CI users are required. PMID:26561884

A Formal Approach to Domain-Oriented Software Design Environments

NASA Technical Reports Server (NTRS)

Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Lum, Henry, Jr. (Technical Monitor)

1994-01-01

This paper describes a formal approach to domain-oriented software design environments, based on declarative domain theories, formal specifications, and deductive program synthesis. A declarative domain theory defines the semantics of a domain-oriented specification language and its relationship to implementation-level subroutines. Formal specification development and reuse is made accessible to end-users through an intuitive graphical interface that guides them in creating diagrams denoting formal specifications. The diagrams also serve to document the specifications. Deductive program synthesis ensures that end-user specifications are correctly implemented. AMPHION has been applied to the domain of solar system kinematics through the development of a declarative domain theory, which includes an axiomatization of JPL's SPICELIB subroutine library. Testing over six months with planetary scientists indicates that AMPHION's interactive specification acquisition paradigm enables users to develop, modify, and reuse specifications at least an order of magnitude more rapidly than manual program development. Furthermore, AMPHION synthesizes one to two page programs consisting of calls to SPICELIB subroutines from these specifications in just a few minutes. Test results obtained by metering AMPHION's deductive program synthesis component are examined. AMPHION has been installed at JPL and is currently undergoing further refinement in preparation for distribution to hundreds of SPICELIB users worldwide. Current work to support end-user customization of AMPHION's specification acquisition subsystem is briefly discussed, as well as future work to enable domain-expert creation of new AMPHION applications through development of suitable domain theories.

Improving delivery of a health-promoting-environments program: experiences from Queensland Health.

PubMed

Dwyer, S

1997-01-01

The purpose of this paper is to outline the key components of a statewide multisite health-promoting-environments program. Contemporary health-promotion programs in settings such as schools, workplaces and hospitals use organisational development theory to address the health issues of the setting, including the physical environment, the organisational environment, and the specific health needs of the employees and consumers of the service. Program principles include management of each project by the participant organisation or site (for example, a school or workplace), using resources available within the organisation and the local community, voluntary participation, social justice and participant-based priority setting, and evaluation and monitoring. Adoption of these principles implies a shift in the role of the health worker from implementer to facilitator. Based on the experience of Queensland Health, it is proposed that the essential building blocks of the health-promoting-environments program are an intersectoral policy base, a model for action, training and resources, local facilitators, support from local organisations, a supportive network of sites, marketing of the program, and a state-based evaluation and monitoring system. The program in Queensland was able to develop a significant number of these components over the 1990-1996 period. In regard to evaluation, process measures can be built around the program components; however, further research is required for development of impact indicators and benchmarks on quality.

Guidelines for development of structural integrity programs for DOE high-level waste storage tanks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bandyopadhyay, K.; Bush, S.; Kassir, M.

Guidelines are provided for developing programs to promote the structural integrity of high-level waste storage tanks and transfer lines at the facilities of the Department of Energy. Elements of the program plan include a leak-detection system, definition of appropriate loads, collection of data for possible material and geometric changes, assessment of the tank structure, and non-destructive examination. Possible aging degradation mechanisms are explored for both steel and concrete components of the tanks, and evaluated to screen out nonsignificant aging mechanisms and to indicate methods of controlling the significant aging mechanisms. Specific guidelines for assessing structural adequacy will be provided inmore » companion documents. Site-specific structural integrity programs can be developed drawing on the relevant portions of the material in this document.« less

A framework for monitoring social process and outcomes in environmental programs.

PubMed

Chapman, Sarah

2014-12-01

When environmental programs frame their activities as being in the service of human wellbeing, social variables need to be integrated into monitoring and evaluation (M&E) frameworks. This article draws upon ecosystem services theory to develop a framework to guide the M&E of collaborative environmental programs with anticipated social benefits. The framework has six components: program need, program activities, pathway process variables, moderating process variables, outcomes, and program value. Needs are defined in terms of ecosystem services, as well as other human needs that must be addressed to achieve outcomes. The pathway variable relates to the development of natural resource governance capacity in the target community. Moderating processes can be externalities such as the inherent capacity of the natural system to service ecosystem needs, local demand for natural resources, policy or socio-economic drivers. Internal program-specific processes relate to program service delivery, targeting and participant responsiveness. Ecological outcomes are expressed in terms of changes in landscape structure and function, which in turn influence ecosystem service provision. Social benefits derived from the program are expressed in terms of the value of the eco-social service to user-specified goals. The article provides suggestions from the literature for identifying indicators and measures for components and component variables, and concludes with an example of how the framework was used to inform the M&E of an adaptive co-management program in western Kenya. Copyright © 2014 Elsevier Ltd. All rights reserved.

Development of a cervical cancer educational program for Chinese women using intervention mapping.

PubMed

Hou, Su-I; Fernandez, Maria E; Parcel, Guy S

2004-01-01

This article describes the development of a program to increase Pap screening behavior among women in Taiwan. Intervention mapping, an innovative process of intervention design, guided the development of this program. The development process included a needs assessment identifying factors influencing Pap screening behavior relevant to Chinese women. The program used methods such as information transmission, modeling, persuasion, and facilitation. Strategies included direct mail communication, role-model stories and testimonials, and a telephone-counseling component. The delineation of specific plans for implementation and evaluation are also described.

LANGUAGE LABORATORY SPECIFICATIONS. A PROCUREMENT GUIDE FOR THE PURCHASE OF LANGUAGE LABORATORY INSTALLATIONS IN WISCONSIN, NDEA, TITLE III.

ERIC Educational Resources Information Center

GRITTNER, FRANK; PAVLAT, RUSSELL

THE KNOWLEDGE ACCUMULATED FROM THE EXPERIENCE OF INSTALLING MANY LANGUAGE LABORATORIES UNDER THE TITLE III, NDEA PROGRAM FORMS THE BASIS FOR THE GUIDELINES PRESENTED IN THIS BULLETIN. THE DOCUMENT INCLUDES A SUMMARY OF CONDITIONS DESIRABLE PRIOR TO THE PURCHASE OF A LABORATORY, SAMPLE SPECIFICATIONS FOR EACH COMPONENT OF THE LAB, SPECIFICATIONS…

Development of a Predictive Corrosion Model Using Locality-Specific Corrosion Indices

DTIC Science & Technology

2017-09-12

6 3.2.1 Statistical data analysis methods ...6 3.2.2 Algorithm development method ...components, and method ) were compiled into an executable program that uses mathematical models of materials degradation, and statistical calcula- tions

VERIFICATION OF HIGH-RATE DISINFECTION TECHNOLOGIES FOR WET-WEATHER FLOW APPLICATIONS

EPA Science Inventory

This paper describes the critical components of the USEPA's Environmental Technology Verification Program for two specific technologies categories: ultraviolet disinfection technologies for treating combined sewer overflow (CSO) and sanitary sewer overflow (SSO), and; and mechani...

Freight Transportation Energy Use : Volume 2. Methodology and Program Documentation.

DOT National Transportation Integrated Search

1978-07-01

The structure and logic of the transportation network model component of the TSC Freight Energy Model are presented. The model assigns given origin-destination commodity flows to specific transport modes and routes, thereby determining the traffic lo...

78 FR 77155 - Grant Program To Assess, Evaluate, and Promote Development of Tribal Energy and Mineral Resources

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-20

... through DEMD's in-house databases; Well log interpretation, including correlation of formation tops.... Files must have descriptive file names to help DEMD quickly locate specific components of the proposal...

The Army’s Construction Program How it Runs

DTIC Science & Technology

2010-06-01

Army Commands ASCC DRU Guard Reserve USA/VCSA Co-Chair SSRG Approve MILCON Requirements & Priorities GDPR /GTA Transformation (Barracks Buy Out...to Commands/Components - Disseminated approved MILCON initiatives and priorities ( GDPR /GTA, Transformation… worst first) - Provided specific

Future HIV Mentoring Programs to Enhance Diversity.

PubMed

Stoff, David M; Cargill, Victoria A

2016-09-01

This paper proposes a general template to guide future mentoring program development addressing: (i) considerations to ensure an adequate research workforce; (ii) key guidelines and principles of mentoring; and (iii) use of a logic model to develop program milestones, outcomes and evaluation. We focus on these areas to guide and inform the most effective mentoring program components, which we find to be more helpful than identifying specific features and ingredients. Although the focus is on the development of a new generation of investigators from diverse backgrounds, this template may also apply to mentoring programs for other investigators and for disciplines beyond HIV.

A STUDY TO EVALUATE THE LEVELS OF DIOXIN-LIKE ...

EPA Pesticide Factsheets

The Environmental Protection Agency (EPA), in cooperation with USDA and the US Food and Drug Administration (FDA), has undertaken a program to study the presence of dioxin-like compounds in animal feeds. Two phases of this program have been completed, and this paper reports on the third phase. The first phase was a study on the mass balance of dioxins in lactating cows. The objective of that study was to quantify the role feeds play in total dairy cow exposures. The second phase of the program involved the collections and measurement of dioxins in minor feed components. Dioxins in specific targeted animal feed components of interest, including animal and plant byproducts were measured. The third phase involved sampling of total mixed dairy feeds and feed components from dairy facilities around the United States, and measuring for dioxin-like compounds. Lorber, M; Ferrario, J; Byrne, C; Greene, C; Cyrus, A. 2004. A Study to Evaluate the Levels of Dioxin-Like Compounds in Dairy Feeds in the United States. Organohalogen Compounds 66: 1958-1965. journal articles

Results of a faith-based weight loss intervention for black women.

PubMed

Fitzgibbon, Marian L; Stolley, Melinda R; Ganschow, Pamela; Schiffer, Linda; Wells, Anita; Simon, Nolanna; Dyer, Alan

2005-10-01

Obesity is a risk factor for a variety of chronic diseases. Although weight loss may reduce these risks, weight loss programs designed for black women have yielded mixed results. Studies suggest that religion/spirituality is a prominent component of black culture. Given this, the inclusion of religion/spirituality as an active component of a weight loss program may enhance the benefits of the program. The role of religion/spirituality, however, has not been specifically tested as a mechanism that enhances the weight loss process. This paper presents the results of "Faith on the Move," a randomized pilot study of a faith-based weight loss program for black women. The goals of the study were to estimate the effects of a 12-week culturally tailored, faith-based weight loss intervention on weight loss, dietary fat consumption and physical activity. The culturally tailored, faith-based weight loss intervention was compared to a culturally tailored weight loss intervention with no active faith component. Fifty-nine overweight/obese black women were randomized to one of the two interventions. Although the results were not statistically significant, the effect size suggests that the addition of the faith component improved results. These promising preliminary results will need to be tested in an adequately powered trial.

Space Shuttle Program (SSP) Shock Test and Specification Experience for Reusable Flight Hardware Equipment

NASA Technical Reports Server (NTRS)

Larsen, Curtis E.

2012-01-01

As commercial companies are nearing a preliminary design review level of design maturity, several companies are identifying the process for qualifying their multi-use electrical and mechanical components for various shock environments, including pyrotechnic, mortar firing, and water impact. The experience in quantifying the environments consists primarily of recommendations from Military Standard-1540, Product Verification Requirement for Launch, Upper Stage, and Space Vehicles. Therefore, the NASA Engineering and Safety Center (NESC) formed a team of NASA shock experts to share the NASA experience with qualifying hardware for the Space Shuttle Program (SSP) and other applicable programs and projects. Several team teleconferences were held to discuss past experience and to share ideas of possible methods for qualifying components for multiple missions. This document contains the information compiled from the discussions

Application of IUS equipment and experience to orbit transfer vehicles of the 90's

NASA Astrophysics Data System (ADS)

Bangsund, E.; Keeney, J.; Cowgill, E.

1985-10-01

This paper relates experiences with the IUS program and the application of that experience to Future Orbit Transfer Vehicles. More specifically it includes the implementation of the U.S. Air Force Space Division high reliability parts standard (SMASO STD 73-2C) and the component/system test standard (MIL-STD-1540A). Test results from the parts and component level testing and the resulting system level test program for fourteen IUS flight vehicles are discussed. The IUS program has had the highest compliance with these standards and thus offers a benchmark of experience for future programs demanding extreme reliability. In summary, application of the stringent parts standard has resulted in fewer failures during testing and the stringent test standard has eliminated design problems in the hardware. Both have been expensive in costs and schedules, and should be applied with flexibility.

An expanded system simulation model for solar energy storage (technical report), volume 1

NASA Technical Reports Server (NTRS)

Warren, A. W.

1979-01-01

The simulation model for wind energy storage (SIMWEST) program now includes wind and/or photovoltaic systems utilizing any combination of five types of storage (pumped hydro, battery, thermal, flywheel and pneumatic) and is available for the UNIVAC 1100 series and the CDC 6000 series computers. The level of detail is consistent with a role of evaluating the economic feasibility as well as the general performance of wind and/or photovoltaic energy systems. The software package consists of two basic programs and a library of system, environmental, and load components. The first program is a precompiler which generates computer models (in FORTRAN) of complex wind and/or photovoltaic source/storage/application systems, from user specifications using the respective library components. The second program provides the techno-economic system analysis with the respective I/0, the integration of system dynamics, and the iteration for conveyance of variables.

Introducing Human Sexuality into the Population Education Curriculum. The State-of-the-Art. Population Education Research Utilization Monograph Series 1 Part 3.

ERIC Educational Resources Information Center

Villanueva, Carmelita L.; Arellano-Reyes, Ma. Felicitas

This paper explores one problem area that hampers the introduction and acceptance of sex education in schools. Specifically, the paper reviews problems related to the human sexuality component of population education programs in the Philippines. Research on the experiences of the Population Education Program (PEP) is discussed, as well as research…

Global opportunities on 239 general surgery residency Web sites.

PubMed

Wackerbarth, Joel J; Campbell, Timothy D; Wren, Sherry; Price, Raymond R; Maier, Ronald V; Numann, Patricia; Kushner, Adam L

2015-09-01

Many general surgical residency programs lack a formal international component. We hypothesized that most surgery programs do not have international training or do not provide the information to prospective applicants regarding electives or programs in an easily accessible manner via Web-based resources. Individual general surgery program Web sites and the American College of Surgeons residency tool were used to identify 239 residencies. The homepages were examined for specific mention of international or global health programs. Ease of access was also considered. Global surgery specific pages or centers were noted. Programs were assessed for length of rotation, presence of research component, and mention of benefits to residents and respective institution. Of 239 programs, 24 (10%) mentioned international experiences on their home page and 42 (18%) contained information about global surgery. Of those with information available, 69% were easily accessible. Academic programs were more likely than independent programs to have information about international opportunities on their home page (13.7% versus 4.0%, P = 0.006) and more likely to have a dedicated program or pathway Web site (18.8% versus 2.0%, P < 0.0001). Half of the residencies with global surgery information did not have length of rotation available. Research was only mentioned by 29% of the Web sites. Benefits to high-income country residents were discussed more than benefits to low- and middle-income country residents (57% versus 17%). General surgery residency programs do not effectively communicate international opportunities for prospective residents through Web-based resources and should seriously consider integrating international options into their curriculum and better present them on department Web sites. Copyright © 2015 Elsevier Inc. All rights reserved.

CLUSFAVOR 5.0: hierarchical cluster and principal-component analysis of microarray-based transcriptional profiles

PubMed Central

Peterson, Leif E

2002-01-01

CLUSFAVOR (CLUSter and Factor Analysis with Varimax Orthogonal Rotation) 5.0 is a Windows-based computer program for hierarchical cluster and principal-component analysis of microarray-based transcriptional profiles. CLUSFAVOR 5.0 standardizes input data; sorts data according to gene-specific coefficient of variation, standard deviation, average and total expression, and Shannon entropy; performs hierarchical cluster analysis using nearest-neighbor, unweighted pair-group method using arithmetic averages (UPGMA), or furthest-neighbor joining methods, and Euclidean, correlation, or jack-knife distances; and performs principal-component analysis. PMID:12184816

Fuel cell technology program

NASA Technical Reports Server (NTRS)

1972-01-01

A program to advance the technology for a cost-effective hydrogen/oxygen fuel cell system for future manned spacecraft is discussed. The evaluation of base line design concepts and the development of product improvements in the areas of life, power, specific weight and volume, versatility of operation, field maintenance and thermal control were conducted from the material and component level through the fabrication and test of an engineering model of the fuel cell system. The program was to be accomplished in a 13 month period.

Advancing Translational Research Through the NHLBI Gene Therapy Resource Program (GTRP)

PubMed Central

Benson, Janet; Cornetta, Kenneth; Diggins, Margaret; Johnston, Julie C.; Sepelak, Susan; Wang, Gensheng; Wilson, James M.; Wright, J. Fraser; Skarlatos, Sonia I.

2013-01-01

Abstract Translational research is a lengthy, complex, and necessary endeavor in order to bring basic science discoveries to clinical fruition. The NIH offers several programs to support translational research including an important resource established specifically for gene therapy researchers—the National Heart, Lung, and Blood Institute (NHLBI) Gene Therapy Resource Program (GTRP). This paper reviews the core components of the GTRP and describes how the GTRP provides researchers with resources that are critical to advancing investigational gene therapy products into clinical testing. PMID:23692378

General Environmental Verification Specification

NASA Technical Reports Server (NTRS)

Milne, J. Scott, Jr.; Kaufman, Daniel S.

2003-01-01

The NASA Goddard Space Flight Center s General Environmental Verification Specification (GEVS) for STS and ELV Payloads, Subsystems, and Components is currently being revised based on lessons learned from GSFC engineering and flight assurance. The GEVS has been used by Goddard flight projects for the past 17 years as a baseline from which to tailor their environmental test programs. A summary of the requirements and updates are presented along with the rationale behind the changes. The major test areas covered by the GEVS include mechanical, thermal, and EMC, as well as more general requirements for planning, tracking of the verification programs.

Mutation Testing for Effective Verification of Digital Components of Physical Systems

NASA Astrophysics Data System (ADS)

Kushik, N. G.; Evtushenko, N. V.; Torgaev, S. N.

2015-12-01

Digital components of modern physical systems are often designed applying circuitry solutions based on the field programmable gate array technology (FPGA). Such (embedded) digital components should be carefully tested. In this paper, an approach for the verification of digital physical system components based on mutation testing is proposed. The reference description of the behavior of a digital component in the hardware description language (HDL) is mutated by introducing into it the most probable errors and, unlike mutants in high-level programming languages, the corresponding test case is effectively derived based on a comparison of special scalable representations of the specification and the constructed mutant using various logic synthesis and verification systems.

Radiation Specifications for Fission Power Conversion Component Materials

NASA Technical Reports Server (NTRS)

Bowman, Cheryl L.; Shin, E. Eugene; Mireles, Omar R.; Radel, Ross F.; Qualls, A. Louis

2011-01-01

NASA has been supporting design studies and technology development that could provide power to an outpost on the moon, Mars, or an asteroid. One power-generation system that is independent of sunlight or power-storage limitations is a fission-based power plant. There is a wealth of terrestrial system heritage that can be transferred to the design and fabrication of a fission power system for space missions, but there are certain design aspects that require qualification. The radiation tolerance of the power conversion system requires scrutiny because the compact nature of a space power plant restricts the dose reduction methodologies compared to those used in terrestrial systems. An integrated research program has been conducted to establish the radiation tolerance of power conversion system-component materials. The radiation limit specifications proposed for a Fission Power System power convertor is 10 Mrad ionizing dose and 5 x 10(exp 14) neutron per square centimeter fluence for a convertor operating at 150 C. Specific component materials and their radiation tolerances are discussed. This assessment is for the power convertor hardware; electronic components are not covered here.

Reactive nitrogen impacts on ecosystem services

EPA Science Inventory

The Ecosystem Services Research Program (ESRP) is a new, multi-year research initiative under development by the Environmental Protection Agency (EPA). As one of its components, ESRP has chosen to focus on reactive Nitrogen (Nr) for stressor-specific ecosystem research through a...

Design for Verification: Using Design Patterns to Build Reliable Systems

NASA Technical Reports Server (NTRS)

Mehlitz, Peter C.; Penix, John; Koga, Dennis (Technical Monitor)

2003-01-01

Components so far have been mainly used in commercial software development to reduce time to market. While some effort has been spent on formal aspects of components, most of this was done in the context of programming language or operating system framework integration. As a consequence, increased reliability of composed systems is mainly regarded as a side effect of a more rigid testing of pre-fabricated components. In contrast to this, Design for Verification (D4V) puts the focus on component specific property guarantees, which are used to design systems with high reliability requirements. D4V components are domain specific design pattern instances with well-defined property guarantees and usage rules, which are suitable for automatic verification. The guaranteed properties are explicitly used to select components according to key system requirements. The D4V hypothesis is that the same general architecture and design principles leading to good modularity, extensibility and complexity/functionality ratio can be adapted to overcome some of the limitations of conventional reliability assurance measures, such as too large a state space or too many execution paths.

Facility Energy Performance Benchmarking in a Data-Scarce Environment

DTIC Science & Technology

2017-08-01

environment, and analyze occupant-, system-, and component-level faults contributing to energy in- efficiency. A methodology for developing DoD-specific...Research, Development, Test, and Evaluation (RDTE) Program to develop an intelligent framework, encompassing methodology and model- ing, that...energy performers by installation, climate zone, and other criteria. A methodology for creating the DoD-specific EUIs would be an important part of a

Command and General Staff College CrossFit Study 2010

DTIC Science & Technology

2010-05-30

program includes four primary components: functional fitness, performance nutrition , sports medicine and mental toughness. The perceived importance of...over the course of a week and athletes were given at least one day of recovery between assessments. Each assessment had prescribed weights to lift or... recovery for athletes during the week, especially in the first two weeks of the program. For this reason, the training plan specifically sought to avoid

Fuel cell technology program

NASA Technical Reports Server (NTRS)

1971-01-01

The results of a solid polymer electrolyte fuel cell development program are summarized. A base line design was defined, and materials and components of the base line configuration were fabricated and tested. Concepts representing base line capability extensions in the areas of life, power, specific weight and volume, versatility of operation, field maintenance, and thermal control were identified and evaluated. Liaison and coordination with space shuttle contractors resulted in the exchange of engineering data.

Routine Immunization Service Delivery Through the Basic Package of Health Services Program in Afghanistan: Gaps, Challenges, and Opportunities.

PubMed

Mbaeyi, Chukwuma; Kamawal, Noor Shah; Porter, Kimberly A; Azizi, Adam Khan; Sadaat, Iftekhar; Hadler, Stephen; Ehrhardt, Derek

2017-07-01

The Basic Package of Health Services (BPHS) program has increased access to immunization services for children living in rural Afghanistan. However, multiple surveys have indicated persistent immunization coverage gaps. Hence, to identify gaps in implementation, an assessment of the BPHS program was undertaken, with specific focus on the routine immunization (RI) component. A cross-sectional survey was conducted in 2014 on a representative sample drawn from a sampling frame of 1858 BPHS health facilities. Basic descriptive analysis was performed, capturing general characteristics of survey respondents and assessing specific RI components, and χ2 tests were used to evaluate possible differences in service delivery by type of health facility. Of 447 survey respondents, 27% were health subcenters (HSCs), 30% were basic health centers, 32% were comprehensive health centers, and 12% were district hospitals. Eighty-seven percent of all respondents offered RI services, though only 61% of HSCs did so. Compared with other facility types, HSCs were less likely to have adequate stock of vaccines, essential cold-chain equipment, or proper documentation of vaccination activities. There is an urgent need to address manpower and infrastructural deficits in RI service delivery through the BPHS program, especially at the HSC level. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America.

National addictions vigilance intervention and prevention program (NAVIPPRO): a real-time, product-specific, public health surveillance system for monitoring prescription drug abuse.

PubMed

Butler, Stephen F; Budman, Simon H; Licari, Andrea; Cassidy, Theresa A; Lioy, Katherine; Dickinson, James; Brownstein, John S; Benneyan, James C; Green, Traci Craig; Katz, Nathaniel

2008-12-01

The National Addictions Vigilance Intervention and Prevention Program (NAVIPPRO) is a scientific, comprehensive risk management program for scheduled therapeutics. NAVIPPRO provides post-marketing surveillance, signal detection, signal verification and prevention and intervention programs. Here we focus on one component of NAVIPPRO surveillance, the Addiction Severity Index-Multimedia Version (ASI-MV) Connect, a continuous, real-time, national data stream that assesses pharmaceutical abuse by patients entering substance abuse treatment by collecting product-specific, geographically-detailed information. We evaluate population characteristics for data collected through the ASI-MV Connect in 2007 and 2008 and assess the representativeness, geographic coverage, and timeliness of report of the data. Analyses based on 41,923 admissions to 265 treatment centers in 29 states were conducted on product-specific opioid abuse rates, source of drug, and route of administration. ASI-MV Connect data revealed that 11.5% of patients reported abuse of at least one opioid analgesic product in the 30 days prior to entering substance abuse treatment; differences were observed among sub-populations of prescription opioid abusers, among products, and also within various geographic locations. The ASI-MV Connect component of NAVIPPRO represents a potentially valuable data stream for post-marketing surveillance of prescription drugs. Analyses conducted with data obtained from the ASI-MV Connect allow for the characterization of product-specific and geospatial differences for drug abuse and can serve as a tool to monitor responses of the abuse population to newly developed "abuse deterrent" drug formulations. Additional data, evaluation, and comparison to other systems are important next steps in establishing NAVIPPRO as a comprehensive, post-marketing surveillance system for prescription drugs. Copyright (c) 2008 John Wiley & Sons, Ltd.

Designing of a Digital Behind-the-Ear Hearing Aid to Meet the World Health Organization Requirements

PubMed Central

Bento, Ricardo Ferreira; Penteado, Silvio Pires

2010-01-01

Hearing loss is a common health issue that affects nearly 10% of the world population as indicated by many international studies. The hearing impaired typically experience more frustration, anxiety, irritability, depression, and disorientation than those with normal hearing levels. The standard rehabilitation tool for hearing impairment is an electronic hearing aid whose main components are transducers (microphone and receiver) and a digital signal processor. These electronic components are manufactured by supply chain rather than by hearing aid manufacturers. Manufacturers can use custom-designed components or generic off-the-shelf components. These electronic components are available as application-specific or off-the-shelf products, with the former designed for a specific manufacturer and the latter for a generic approach. The choice of custom or generic components will affect the product specifications, pricing, manufacturing, life cycle, and marketing strategies of the product. The World Health Organization is interested in making available to developing countries hearing aids that are inexpensive to purchase and maintain. The hearing aid presented in this article was developed with these specifications in mind together with additional contemporary features such as four channels with wide dynamic range compression, an adjustable compression rate for each channel, four comfort programs, an adaptive feedback manager, and full volume control. This digital hearing aid is fitted using a personal computer with minimal hardware requirements in intuitive three-step fitting software. A trimmer-adjusted version can be developed where human and material resources are scarce. PMID:20724354

Designing of a digital behind-the-ear hearing aid to meet the World Health Organization requirements.

PubMed

Bento, Ricardo Ferreira; Penteado, Silvio Pires

2010-06-01

Hearing loss is a common health issue that affects nearly 10% of the world population as indicated by many international studies. The hearing impaired typically experience more frustration, anxiety, irritability, depression, and disorientation than those with normal hearing levels. The standard rehabilitation tool for hearing impairment is an electronic hearing aid whose main components are transducers (microphone and receiver) and a digital signal processor. These electronic components are manufactured by supply chain rather than by hearing aid manufacturers. Manufacturers can use custom-designed components or generic off-the-shelf components. These electronic components are available as application-specific or off-the-shelf products, with the former designed for a specific manufacturer and the latter for a generic approach. The choice of custom or generic components will affect the product specifications, pricing, manufacturing, life cycle, and marketing strategies of the product. The World Health Organization is interested in making available to developing countries hearing aids that are inexpensive to purchase and maintain. The hearing aid presented in this article was developed with these specifications in mind together with additional contemporary features such as four channels with wide dynamic range compression, an adjustable compression rate for each channel, four comfort programs, an adaptive feedback manager, and full volume control. This digital hearing aid is fitted using a personal computer with minimal hardware requirements in intuitive three-step fitting software. A trimmer-adjusted version can be developed where human and material resources are scarce.

A summary of EHV propulsion technology. [Electric and Hybrid Vehicle

NASA Technical Reports Server (NTRS)

Schwartz, H. J.

1983-01-01

While the battery used by an electric vehicle is the primary determinant of range, and to a lesser extent of performance, the design of the vehicle's propulsion system establishes its performance level and is the greatest contributor to its purchase price. Propulsion system weight, efficiency and cost are related to the specific combination of components used. Attention is given to the development status of the U.S. Department of Energy's Electric and Hybrid Vehicle Program, through which propulsion component and system design improvements have been made which promise weight savings of 35-50 percent, efficiency gains of 25 percent, and lower costs, when compared to the state of the art at the program's inception.

Projection display technology for avionics applications

NASA Astrophysics Data System (ADS)

Kalmanash, Michael H.; Tompkins, Richard D.

2000-08-01

Avionics displays often require custom image sources tailored to demanding program needs. Flat panel devices are attractive for cockpit installations, however recent history has shown that it is not possible to sustain a business manufacturing custom flat panels in small volume specialty runs. As the number of suppliers willing to undertake this effort shrinks, avionics programs unable to utilize commercial-off-the-shelf (COTS) flat panels are placed in serious jeopardy. Rear projection technology offers a new paradigm, enabling compact systems to be tailored to specific platform needs while using a complement of COTS components. Projection displays enable improved performance, lower cost and shorter development cycles based on inter-program commonality and the wide use of commercial components. This paper reviews the promise and challenges of projection technology and provides an overview of Kaiser Electronics' efforts in developing advanced avionics displays using this approach.

Incorporating cultural constructs and demographic diversity in the research and development of a Latina breast and cervical cancer education program.

PubMed

Erwin, Deborah O; Johnson, Virginia A; Feliciano-Libid, Luisa; Zamora, Dulce; Jandorf, Lina

2005-01-01

Latino immigrants are at higher risk of death from breast and cervical cancer, necessitating effective cancer education interventions. Qualitative and quantitative information was obtained from Latinos from Arkansas and New York City through focus groups and questionnaires. Findings were analyzed using the PEN-3 model. The results demonstrate a mechanism for creating a culturally competent program, Esperanza y Vida, through progressively analyzing the findings to define the key perceptions, enablers, and nurturers, then applying this information to construct program components to address appropriate health behavior and cultural components that address the specific needs of a diverse Latino population. Finding a systematic approach to incorporating and embracing sociocultural perspectives and constructs may effectively appeal to diverse Latino immigrants in the development of a cancer education intervention.

The software-cycle model for re-engineering and reuse

NASA Technical Reports Server (NTRS)

Bailey, John W.; Basili, Victor R.

1992-01-01

This paper reports on the progress of a study which will contribute to our ability to perform high-level, component-based programming by describing means to obtain useful components, methods for the configuration and integration of those components, and an underlying economic model of the costs and benefits associated with this approach to reuse. One goal of the study is to develop and demonstrate methods to recover reusable components from domain-specific software through a combination of tools, to perform the identification, extraction, and re-engineering of components, and domain experts, to direct the applications of those tools. A second goal of the study is to enable the reuse of those components by identifying techniques for configuring and recombining the re-engineered software. This component-recovery or software-cycle model addresses not only the selection and re-engineering of components, but also their recombination into new programs. Once a model of reuse activities has been developed, the quantification of the costs and benefits of various reuse options will enable the development of an adaptable economic model of reuse, which is the principal goal of the overall study. This paper reports on the conception of the software-cycle model and on several supporting techniques of software recovery, measurement, and reuse which will lead to the development of the desired economic model.

School-Based First Aid Training Programs: A Systematic Review.

PubMed

Reveruzzi, Bianca; Buckley, Lisa; Sheehan, Mary

2016-04-01

This review examines the breadth of first aid training delivered to school students and the components that are age appropriate to adolescents. Eligible studies included school-based first aid interventions targeting students aged between 10 and 18 years. Online databases were searched, for peer-reviewed publications available as at August 2014. A total of 20 journal articles were relevant to the review. Research supported programs with longer durations (3 hours or more). Most programs taught resuscitation alone and few included content that was context-specific and relevant to the target group. The training experience of the facilitator did not appear to impact on student outcomes. Incorporating both practical and didactic components was found to be an important factor in delivering material and facilitating the retention of knowledge. Educational resources and facilitator training were found to be common features of effective programs. The review supports first aid in school curriculum and provides details of key components pertinent to design of school-based first aid programs. The findings suggest that first aid training may have benefits wider than the uptake and retention of knowledge and skills. There is a need for future research, particularly randomized controlled trials to aid in identifying best practice approaches. © 2016, American School Health Association.

Life review based on remembering specific positive events in active aging.

PubMed

Latorre, José M; Serrano, Juan P; Ricarte, Jorge; Bonete, Beatriz; Ros, Laura; Sitges, Esther

2015-02-01

The aim of this study is to evaluate the effectiveness of life review (LR) based on specific positive events in non-depressed older adults taking part in an active aging program. Fifty-five older adults were randomly assigned to an experimental group or an active control (AC) group. A six-session individual training of LR based on specific positive events was carried out with the experimental group. The AC group undertook a "media workshop" of six sessions focused on learning journalistic techniques. Pre-test and post-test measures included life satisfaction, depressive symptoms, experiencing the environment as rewarding, and autobiographical memory (AM) scales. LR intervention decreased depressive symptomatology, improved life satisfaction, and increased specific memories. The findings suggest that practice in AM for specific events is an effective component of LR that could be a useful tool in enhancing emotional well-being in active aging programs, thus reducing depressive symptoms. © The Author(s) 2014.

Comparative analysis of programmed cell death pathways in filamentous fungi.

PubMed

Fedorova, Natalie D; Badger, Jonathan H; Robson, Geoff D; Wortman, Jennifer R; Nierman, William C

2005-12-08

Fungi can undergo autophagic- or apoptotic-type programmed cell death (PCD) on exposure to antifungal agents, developmental signals, and stress factors. Filamentous fungi can also exhibit a form of cell death called heterokaryon incompatibility (HI) triggered by fusion between two genetically incompatible individuals. With the availability of recently sequenced genomes of Aspergillus fumigatus and several related species, we were able to define putative components of fungi-specific death pathways and the ancestral core apoptotic machinery shared by all fungi and metazoa. Phylogenetic profiling of HI-associated proteins from four Aspergilli and seven other fungal species revealed lineage-specific protein families, orphan genes, and core genes conserved across all fungi and metazoa. The Aspergilli-specific domain architectures include NACHT family NTPases, which may function as key integrators of stress and nutrient availability signals. They are often found fused to putative effector domains such as Pfs, SesB/LipA, and a newly identified domain, HET-s/LopB. Many putative HI inducers and mediators are specific to filamentous fungi and not found in unicellular yeasts. In addition to their role in HI, several of them appear to be involved in regulation of cell cycle, development and sexual differentiation. Finally, the Aspergilli possess many putative downstream components of the mammalian apoptotic machinery including several proteins not found in the model yeast, Saccharomyces cerevisiae. Our analysis identified more than 100 putative PCD associated genes in the Aspergilli, which may help expand the range of currently available treatments for aspergillosis and other invasive fungal diseases. The list includes species-specific protein families as well as conserved core components of the ancestral PCD machinery shared by fungi and metazoa.

A content analysis of food references in television programming specifically targeting viewing audiences aged 11 to 14 years.

PubMed

Roseman, Mary G; Poor, Morgan; Stephenson, Tammy J

2014-01-01

Examine food in cable television programming specifically targeting 11- to 14-year-olds ("tweens"). Content analysis of food-related scenes (FRS)-in which food was shown, mentioned, and/or consumed-in 880 minutes of programming was conducted. Five days of afternoon/early evening television programs on the Disney Channel. Food references were compared with USDA MyPlate and classified according to modified Ratio of Recommended to Restricted Food Components. The authors found 331 FRS, averaging 16.6 scenes/h. Preponderance of FRS was physiological needs (40.7%), followed by display (10%), party (8.5%), social event (8%), and retail store (6.6%). Snacks dominated 41% of FRS, and breakfast, lunch, and dinner were much lower in frequency. Half of FRS was visual only, followed by verbal only. Food references were not congruent with MyPlate recommendations; 42% of food items did not fit into MyPlate food groups. Only 24% of food items were fruit or vegetables, which is considerably less than recommended by MyPlate guidelines. Using modified Ratio of Recommended to Restricted Food Components, 66% of food items scored < 1.0, signifying less nutritious. Tween television programming regularly includes non-nutritious food, which likely influences tweens' attitudes and behaviors. Television programming may consider past approaches to tobacco smoking and health messages on television. More attention is warranted regarding television programming by nutrition educators, researchers, health professionals, and industry specialists. Copyright © 2014 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Community outreach: from measuring the difference to making a difference with health information*

PubMed Central

Ottoson, Judith M.; Green, Lawrence W.

2005-01-01

Background: Community-based outreach seeks to move libraries beyond their traditional institutional boundaries to improve both access to and effectiveness of health information. The evaluation of such outreach needs to involve the community in assessing the program's process and outcomes. Purpose: Evaluation of community-based library outreach programs benefits from a participatory approach. To explain this premise of the paper, three components of evaluation theory are paired with relevant participatory strategies. Concepts: The first component of evaluation theory is also a standard of program evaluation: use. Evaluation is intended to be useful for stakeholders to make decisions. A useful evaluation is credible, timely, and of adequate scope. Participatory approaches to increase use of evaluation findings include engaging end users early in planning the program itself and in deciding on the outcomes of the evaluation. A second component of evaluation theory seeks to understand what is being evaluated, such as specific aspects of outreach programs. A transparent understanding of the ways outreach achieves intended goals, its activities and linkages, and the context in which it operates precedes any attempt to measure it. Participatory approaches to evaluating outreach include having end users, such as health practitioners in other community-based organizations, identify what components of the outreach program are most important to their work. A third component of evaluation theory is concerned with the process by which value is placed on outreach. What will count as outreach success or failure? Who decides? Participatory approaches to valuing include assuring end-user representation in the formulation of evaluation questions and in the interpretation of evaluation results. Conclusions: The evaluation of community-based outreach is a complex process that is not made easier by a participatory approach. Nevertheless, a participatory approach is more likely to make the evaluation findings useful, ensure that program knowledge is shared, and make outreach valuing transparent. PMID:16239958

Current Challenges for HTCMC Aero-Propulsion Components

NASA Technical Reports Server (NTRS)

DiCarlo, James A.; Bansal, Narottam P.

2007-01-01

In comparison to the best metallic materials, HTCMC aero-propulsion engine components offer the opportunity of reduced weight and higher temperature operation, with corresponding improvements in engine cooling requirements, emissions, thrust, and specific fuel consumption. Although much progress has been made in the development of advanced HTCMC constituent materials and processes, major challenges still remain for their implementation into these components. The objectives of this presentation are to briefly review (1) potential HTCMC aero-propulsion components and their generic material performance requirements, (2) recent progress at NASA and elsewhere concerning advanced constituents and processes for meeting these requirements, (3) key HTCMC component implementation challenges that are currently being encountered, and (4) on-going activities within the new NASA Fundamental Aeronautics Program that are addressing these challenges.

Moisture and Structural Analysis for High Performance Hybrid Wall Assemblies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grin, A.; Lstiburek, J.

2012-09-01

This report describes the work conducted by the Building Science Corporation (BSC) Building America Research Team's 'Energy Efficient Housing Research Partnerships' project. Based on past experience in the Building America program, they have found that combinations of materials and approaches---in other words, systems--usually provide optimum performance. No single manufacturer typically provides all of the components for an assembly, nor has the specific understanding of all the individual components necessary for optimum performance.

HEDL FACILITIES CATALOG 400 AREA

DOE Office of Scientific and Technical Information (OSTI.GOV)

MAYANCSIK BA

1987-03-01

The purpose of this project is to provide a sodium-cooled fast flux test reactor designed specifically for irradiation testing of fuels and materials and for long-term testing and evaluation of plant components and systems for the Liquid Metal Reactor (LMR) Program. The FFTF includes the reactor, heat removal equipment and structures, containment, core component handling and examination, instrumentation and control, and utilities and other essential services. The complex array of buildings and equipment are arranged around the Reactor Containment Building.

Vector control activities: Fiscal Year, 1986

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-04-01

The program is divided into two major components - operations and support studies. The support studies are designed to improve the operational effectiveness and efficiency of the control program and to identify other vector control problems requiring TVA attention and study. Nonchemical methods of control are emphasized and are supplemented with chemical measures as needed. TVA also cooperates with various concerned municipalities in identifying blood-sucking arthropod pest problems and demonstrating control techniques useful in establishing abatement programs, and provides technical assistance to other TVA programs and organizations. The program also helps Land Between The Lakes (LBL) plan and conduct vectormore » control operations and tick control research. Specific program control activities and support studies are discussed.« less

Mechanical Analysis of W78/88-1 Life Extension Program Warhead Design Options

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spencer, Nathan

2014-09-01

Life Extension Program (LEP) is a program to repair/replace components of nuclear weapons to ensure the ability to meet military requirements. The W78/88-1 LEP encompasses the modernization of two major nuclear weapon reentry systems into an interoperable warhead. Several design concepts exist to provide different options for robust safety and security themes, maximum non-nuclear commonality, and cost. Simulation is one capability used to evaluate the mechanical performance of the designs in various operational environments, plan for system and component qualification efforts, and provide insight into the survivability of the warhead in environments that are not currently testable. The simulation effortsmore » use several Sandia-developed tools through the Advanced Simulation and Computing program, including Cubit for mesh generation, the DART Model Manager, SIERRA codes running on the HPC TLCC2 platforms, DAKOTA, and ParaView. Several programmatic objectives were met using the simulation capability including: (1) providing early environmental specification estimates that may be used by component designers to understand the severity of the loads their components will need to survive, (2) providing guidance for load levels and configurations for subassembly tests intended to represent operational environments, and (3) recommending design options including modified geometry and material properties. These objectives were accomplished through regular interactions with component, system, and test engineers while using the laboratory's computational infrastructure to effectively perform ensembles of simulations. Because NNSA has decided to defer the LEP program, simulation results are being documented and models are being archived for future reference. However, some advanced and exploratory efforts will continue to mature key technologies, using the results from these and ongoing simulations for design insights, test planning, and model validation.« less

A learning apprentice for software parts composition

NASA Technical Reports Server (NTRS)

Allen, Bradley P.; Holtzman, Peter L.

1987-01-01

An overview of the knowledge acquisition component of the Bauhaus, a prototype computer aided software engineering (CASE) workstation for the development of domain-specific automatic programming systems (D-SAPS) is given. D-SAPS use domain knowledge in the refinement of a description of an application program into a compilable implementation. The approach to the construction of D-SAPS was to automate the process of refining a description of a program, expressed in an object-oriented domain language, into a configuration of software parts that implement the behavior of the domain objects.

A Learning Curriculum: Toward Student-Driven Pedagogy in the Context of Adult English for Academic Purposes, English for Specific Purposes, and Workplace English Programs

ERIC Educational Resources Information Center

Ananyeva, Maria

2014-01-01

This article introduces the concept of a learning curriculum that places adult English as a second language (ESL) students' needs in the center and encourages the engagement of ESL learners in curriculum design. The study is based on contemporary research in the field of adult ESL program planning. It summarizes key components of a learning…

Ultramicrowave communications system, phase 3

NASA Technical Reports Server (NTRS)

1981-01-01

The ultramicrowave communications system program investigated the feasibility of a solid state system that meets the projected space to space requirements, while using the advantages of the 100 to 200 GHz band. The program successfully demonstrated a laboratory model of a high frequency communications system operating between 100 to 200 GHz. In the process, vendor claims for performance specifications of discrete components were evaluated, and a window was provided into system design and integration problems.

Intelligent Systems for Power Management and Distribution

NASA Technical Reports Server (NTRS)

Button, Robert M.

2002-01-01

The motivation behind an advanced technology program to develop intelligent power management and distribution (PMAD) systems is described. The program concentrates on developing digital control and distributed processing algorithms for PMAD components and systems to improve their size, weight, efficiency, and reliability. Specific areas of research in developing intelligent DC-DC converters and distributed switchgear are described. Results from recent development efforts are presented along with expected future benefits to the overall PMAD system performance.

Dual-Shaft Electric Propulsion (DSEP) Technology Development Program

NASA Astrophysics Data System (ADS)

1992-08-01

The background, progress, and current state of the DOE-sponsored Advanced Dual-Shaft Electric Propulsion Technology Development are presented. Three electric-drive vehicles were build as conversions of a commercial gasoline-powered van, using program-designed components and systems as required. The vehicles were tested primarily on dynamometer or test tract. Component and system testing represented a major portion of the development effort. Test data are summarized in this report, and an Appendix contains the final component design specifications. This major programmatic concerns were the traction battery, the battery management system, the dc-to-ac inverter, the drive motor, the transaxle and its ancillary equipment, and the vehicle controller. Additional effort was devoted to vehicle-related equipment: gear selector, power steering, power brakes, accelerator, dashboard instrumentation, and heater. Design, development, and test activities are reported for each of these items, together with an appraisal (lessons learned) and recommendations for possible further work. Other programmatic results include a Cost and Commercialization Analysis, a Reliability and Hazards Analysis Study, Technical Recommendations for Next-Generation Development, and an assessment of overall program efforts.

Estimation of waste component-specific landfill decay rates using laboratory-scale decomposition data.

PubMed

De la Cruz, Florentino B; Barlaz, Morton A

2010-06-15

The current methane generation model used by the U.S. EPA (Landfill Gas Emissions Model) treats municipal solid waste (MSW) as a homogeneous waste with one decay rate. However, component-specific decay rates are required to evaluate the effects of changes in waste composition on methane generation. Laboratory-scale rate constants, k(lab), for the major biodegradable MSW components were used to derive field-scale decay rates (k(field)) for each waste component using the assumption that the average of the field-scale decay rates for each waste component, weighted by its composition, is equal to the bulk MSW decay rate. For an assumed bulk MSW decay rate of 0.04 yr(-1), k(field) was estimated to be 0.298, 0.171, 0.015, 0.144, 0.033, 0.02, 0.122, and 0.029 yr(-1), for grass, leaves, branches, food waste, newsprint, corrugated containers, coated paper, and office paper, respectively. The effect of landfill waste diversion programs on methane production was explored to illustrate the use of component-specific decay rates. One hundred percent diversion of yard waste and food waste reduced the year 20 methane production rate by 45%. When a landfill gas collection schedule was introduced, collectable methane was most influenced by food waste diversion at years 10 and 20 and paper diversion at year 40.

NDE Process Development Specification for SRB Composite Nose Cap

NASA Technical Reports Server (NTRS)

Suits, M.

1999-01-01

The Shuttle Upgrade program is a continuing improvement process to enable the Space Shuttle to be an effective space transportation vehicle for the next few decades. The Solid Rocket Booster (SRB), as a component of that system, is currently undergoing such an improvement. Advanced materials, such as composites, have given us a chance to improve performance and to reduce weight. The SRB Composite Nose Cap (CNC) program aims to replace the current aluminum nose cap, which is coated with a Thermal Protection System and poses a possible debris hazard, with a lighter, stronger, CNC. For the next 2 years, this program will evaluate the design, material selection, properties, and verification of the CNC. This particular process specification cites the methods and techniques for verifying the integrity of such a nose cap with nondestructive evaluation.

Mentor Advice Giving in an Alternative Certification Program for Secondary Science Teaching: Opportunities and Roadblocks in Developing a Knowledge Base for Teaching

NASA Astrophysics Data System (ADS)

Upson Bradbury, Leslie; Koballa, Thomas R., Jr.

2007-12-01

Mentoring is often an important component of alternative certification programs, yet little is known about what novices learn about science teaching through mentoring relationships. This study investigated the advice given by two mentor science teachers to their protégés. Findings indicate that mentors gave more advice related to general pedagogical knowledge than science-specific pedagogical content knowledge. Specifically, there was little to no advice related to the topics of inquiry, the nature of science, or the development of scientific literacy. Implications call for an increase in communication between university teacher education programs and school-based mentors, the development of benchmarks to help guide mentor-protégé interactions, and the importance of a multiyear induction process.

Enhanced surveillance program FY97 accomplishments. Progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mauzy, A.; Laake, B.

1997-10-01

This annual report is one volume of the Enhanced Surveillance Program (ESP) FY97 Accomplishments. The complete accomplishments report consists of 11 volumes. Volume 1 includes an ESP overview and a summary of selected unclassified FY97 program highlights. Volume 1 specifically targets a general audience, reflecting about half of the tasks conducted in FY97 and emphasizing key program accomplishments and contributions. The remaining volumes of the accomplishments report are classified, organized by program focus area, and present in technical detail the progress achieved in each of the 104 FY97 program tasks. Focus areas are as follows: pits; high explosives; organics; dynamics;more » diagnostics; systems; secondaries; nonnuclear materials; nonnuclear components; and Surveillance Test Program upgrades.« less

Required and Elective Experiences During the 4th Year: An Analysis of ACGME Accredited Psychiatry Residency Program Websites.

PubMed

Vestal, Heather S; Belitsky, Richard; Bernstein, Carol A; Chaukos, Deanna; Cohen, Mitchell B; Dickstein, Leah J; Hilty, Donald M; Hutner, Lucy; Sakman, Ferda; Scheiber, Stephen C; Wrzosek, Marika I; Silberman, Edward K

2016-10-01

The objective of this study was to assess and describe required and elective components of the 4th post-graduate year (PGY4) in psychiatry residency programs. We reviewed the websites of all 193 2014-2015 ACGME accredited psychiatry residency programs for content describing the specific components of the PGY4 year. Nearly all residency programs (99 %) had some form of required experiences during the PGY4 year. Ninety-four percent had clinical requirements for PGY4 residents, with longitudinal outpatient clinic being the most common (77 %). All programs offered some elective time during PGY4, but the amount of time ranged from 2 months to 100 %. Virtually all residency programs include some requirements in the 4th year (most commonly didactics and outpatient clinic) in addition to a broad array of elective experiences. Although 3 years may suffice for residents to complete ACGME requirements, a variety of factors may motivate programs to include required 4th year curricula. Future studies should explore the rationales for and possible benefits of programmatic requirements throughout 4 versus only 3 years of psychiatric training.

DOE handbook: Guide to good practices for training and qualification of maintenance personnel

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-03-01

The purpose of this Handbook is to provide contractor training organizations with information that can be used to verify the adequacy of and/or modify existing maintenance training programs, or to develop new training programs. This guide, used in conjunction with facility-specific job analyses, provides a framework for training and qualification programs for maintenance personnel at DOE reactor and nonreactor nuclear facilities. Recommendations for qualification are made in four areas: education, experience, physical attributes, and training. The functional positions of maintenance mechanic, electrician, and instrumentation and control technician are covered by this guide. Sufficient common knowledge and skills were found tomore » include the three disciplines in one guide to good practices. Contents include: qualifications; on-the-job training; trainee evaluation; continuing training; training effectiveness evaluation; and program records. Appendices are included which relate to: administrative training; industrial safety training; fundamentals training; tools and equipment training; facility systems and component knowledge training; facility systems and component skills training; and specialized skills training.« less

Fundamental Fortran for Social Scientists.

ERIC Educational Resources Information Center

Veldman, Donald J.

An introduction to Fortran programming specifically for social science statistical and routine data processing is provided. The first two sections of the manual describe the components of computer hardware and software. Topics include input, output, and mass storage devices; central memory; central processing unit; internal storage of data; and…

Overview Snapshot Observational Technique (OSOT): Administration Manual Experimental Research Form.

ERIC Educational Resources Information Center

Coller, Alan R.

Overview Snapshot Observational Technical (OSOT) is specifically designed to allow users to obtain both pictorial and categorical data related to the transactions in context component of early childhood (prekindergarten and kindergarten) educational programs. Such information is especially useful in operations calling for descriptive evaluation.…

Promoting active transportation as a partnership between urban planning and public health: the columbus healthy places program.

PubMed

Green, Christine Godward; Klein, Elizabeth G

2011-01-01

Active transportation has been considered as one method to address the American obesity epidemic. To address obesity prevention through built-environment change, the local public health department in Columbus, Ohio, established the Columbus Healthy Places (CHP) program to formally promote active transportation in numerous aspects of community design for the city. In this article, we present a case study of the CHP program and discuss the review of city development rezoning applications as a successful strategy to link public health to urban planning. Prior to the CHP review, 7% of development applications in Columbus included active transportation components; in 2009, 64% of development applications adopted active transportation components specifically recommended by the CHP review. Active transportation recommendations generally included adding bike racks, widening or adding sidewalks, and providing sidewalk connectivity. Recommendations and lessons learned from CHP are provided.

Plasma contactor technology for Space Station Freedom

NASA Technical Reports Server (NTRS)

Patterson, Michael J.; Hamley, John A.; Sarver-Verhey, Timothy; Soulas, George C.; Parkes, James; Ohlinger, Wayne L.; Schaffner, Michael S.; Nelson, Amy

1993-01-01

Hollow cathode plasma contactors were baselined for Space Station Freedom (SSF) to control the electrical potentials of surfaces to eliminate/mitigate damaging interactions with the space environment. The system represents a dual-use technology which is a direct outgrowth of the NASA electric propulsion program and in particular the technology development effort on ion thruster systems. Specific efforts include optimizing the design and configuration of the contactor, validating its required lifetime, and characterizing the contactor plume and electromagnetic interference. The plasma contact or subsystems include the plasma contact or unit, a power electronics unit, and an expellant management unit. Under this program these will all be brought to breadboard and engineering model development status. New test facilities were developed, and existing facilities were augmented, to support characterizations and life testing of contactor components and systems. The magnitude, scope, and status of the plasma contactor hardware development program now underway and preliminary test results on system components are discussed.

Plasma contactor technology for Space Station Freedom

NASA Technical Reports Server (NTRS)

Patterson, Michael J.; Hamley, John A.; Sarver-Verhey, Timothy; Soulas, George C.; Parkes, James; Ohlinger, Wayne L.; Schaffner, Michael S.; Nelson, Amy

1993-01-01

Hollow cathode plasma contactors have been baselined for Space Station Freedom to control the electrical potentials of surfaces to eliminate/mitigate damaging interactions with the space environment. The system represents a dual-use technology which is a direct outgrowth of the NASA electric propulsion program and in particular the technology development effort on ion thruster systems. Specific efforts include optimizing the design and configuration of the contactor, validating its required lifetime, and characterizing the contactor plume and electromagnetic interference. The plasma contactor subsystems include the plasma contactor unit, a power electronics unit, and an expellant management unit. Under this program these will all be brought to breadboard and engineering model development status. New test facilities have been developed, and existing facilities have been augmented, to support characterizations and life testing of contactor components and systems. This paper discusses the magnitude, scope, and status of the plasma contactor hardware development program now under way and preliminary test results on system components.

Promoting Active Transportation as a Partnership Between Urban Planning and Public Health: The Columbus Healthy Places Program

PubMed Central

Green, Christine Godward; Klein, Elizabeth G.

2011-01-01

Active transportation has been considered as one method to address the American obesity epidemic. To address obesity prevention through built-environment change, the local public health department in Columbus, Ohio, established the Columbus Healthy Places (CHP) program to formally promote active transportation in numerous aspects of community design for the city. In this article, we present a case study of the CHP program and discuss the review of city development rezoning applications as a successful strategy to link public health to urban planning. Prior to the CHP review, 7% of development applications in Columbus included active transportation components; in 2009, 64% of development applications adopted active transportation components specifically recommended by the CHP review. Active transportation recommendations generally included adding bike racks, widening or adding sidewalks, and providing sidewalk connectivity. Recommendations and lessons learned from CHP are provided. PMID:21563711

Adolescents' knowledge and beliefs about pregnancy: the impact of "ENABL".

PubMed

Arnold, E M; Smith, T E; Harrison, D F; Springer, D W

2000-01-01

Finding effective ways to prevent adolescent pregnancy is a concern of public health officials, educators, social workers, parents, and legislators. Numerous programs exist, but there is debate as to whether it is the specific program itself or other factors that are responsible for participants' successful outcomes. Using a quasi-experimental design, this study sought to determine which factors predicted changes in knowledge and beliefs among middle school students (N = 1,450) after exposure to Postponing Sexual Involvement (PSI), the curricular component of Education Now and Babies Later (ENABL), a pregnancy prevention program. It was found that the single most important predictor of improvement in knowledge and beliefs about pregnancy prevention was PSI itself, not background variables. The findings contradict some of the previous studies on factors impacting teenage pregnancy and lend support for the continued examination of ENABL as a promising component of pregnancy prevention efforts.

Assessing Cognitive Performance in Badminton Players: A Reproducibility and Validity Study

PubMed Central

van de Water, Tanja; Faber, Irene; Elferink-Gemser, Marije

2017-01-01

Abstract Fast reaction and good inhibitory control are associated with elite sports performance. To evaluate the reproducibility and validity of a newly developed Badminton Reaction Inhibition Test (BRIT), fifteen elite (25 ± 4 years) and nine non-elite (24 ± 4 years) Dutch male badminton players participated in the study. The BRIT measured four components: domain-general reaction time, badminton-specific reaction time, domain-general inhibitory control and badminton-specific inhibitory control. Five participants were retested within three weeks on the badminton-specific components. Reproducibility was acceptable for badminton-specific reaction time (ICC = 0.626, CV = 6%) and for badminton-specific inhibitory control (ICC = 0.317, CV = 13%). Good construct validity was shown for badminton-specific reaction time discriminating between elite and non-elite players (F = 6.650, p < 0.05). Elite players did not outscore non-elite players on domain-general reaction time nor on both components of inhibitory control (p > 0.05). Concurrent validity for domain-general reaction time was good, as it was associated with a national ranking for elite (p = 0.70, p < 0.01) and non-elite (p = 0.70, p < 0.05) players. No relationship was found between the national ranking and badminton-specific reaction time, nor both components of inhibitory control (p > 0.05). In conclusion, reproducibility and validity of inhibitory control assessment was not confirmed, however, the BRIT appears a reproducible and valid measure of reaction time in badminton players. Reaction time measured with the BRIT may provide input for training programs aiming to improve badminton players’ performance. PMID:28210347

Assessing Cognitive Performance in Badminton Players: A Reproducibility and Validity Study.

PubMed

van de Water, Tanja; Huijgen, Barbara; Faber, Irene; Elferink-Gemser, Marije

2017-01-01

Fast reaction and good inhibitory control are associated with elite sports performance. To evaluate the reproducibility and validity of a newly developed Badminton Reaction Inhibition Test (BRIT), fifteen elite (25 ± 4 years) and nine non-elite (24 ± 4 years) Dutch male badminton players participated in the study. The BRIT measured four components: domain-general reaction time, badminton-specific reaction time, domain-general inhibitory control and badminton-specific inhibitory control. Five participants were retested within three weeks on the badminton-specific components. Reproducibility was acceptable for badminton-specific reaction time (ICC = 0.626, CV = 6%) and for badminton-specific inhibitory control (ICC = 0.317, CV = 13%). Good construct validity was shown for badminton-specific reaction time discriminating between elite and non-elite players (F = 6.650, p < 0.05). Elite players did not outscore non-elite players on domain-general reaction time nor on both components of inhibitory control (p > 0.05). Concurrent validity for domain-general reaction time was good, as it was associated with a national ranking for elite (p = 0.70, p < 0.01) and non-elite (p = 0.70, p < 0.05) players. No relationship was found between the national ranking and badminton-specific reaction time, nor both components of inhibitory control (p > 0.05). In conclusion, reproducibility and validity of inhibitory control assessment was not confirmed, however, the BRIT appears a reproducible and valid measure of reaction time in badminton players. Reaction time measured with the BRIT may provide input for training programs aiming to improve badminton players' performance.

Refurbishment of SRB aluminum components by walnut hull blast removal of protective coatings

NASA Technical Reports Server (NTRS)

Colberg, W. R.; Gordon, G. H.; Jackson, C. H.

1982-01-01

A test program was conducted to develop, optimize, and scale up an abrasive blasting procedure was developed for refurbishment of specific SRB components: aft skirt, forward skirt, frustrum, and painted piece parts. Test specimens utilizing 2219 T87 aluminum substrate of varying thicknesses were prepared and blasted at progressively increasing pressures with selected abrasives. Specimens were analyzed for material response. The optimum blasting parameters were determined on panel specimens and verified on a large cylindrical integrated test bed.

Chemical characterization of some aqueous leachates from crop residues in 'CELSS'

NASA Technical Reports Server (NTRS)

Madsen, Brooks C.

1992-01-01

Aqueous leachate samples prepared from crop residues that are produced as a component of the Controlled Ecological Life Support System program designed to support long duration space missions have been compared and general chemical characterization has been accomplished. Solid phase extraction and high performance liquid chromatography were used to accomplish comparisons based on chromatographic and ultraviolet absorption properties of the components that are present. Specific compounds were not identified, however, general composition related to the presence of phenol-like compounds was explored.

Educating Young People about Environmental Health for Informed Social Action.

PubMed

Keselman, Alla; Levin, Daniel M; Kramer, Judy F; Matzkin, Karen; Dutcher, Gale

2011-01-01

Whereas environmental health education is rapidly becoming a global priority, it still receives little attention in schools. This paper describes a U.S. National Library of Medicine program, aiming to support environmental health education in grades 6-12 in U.S. schools. The program has four components: (1) developing reliable online resources that provide quality environmental health information; (2) creating lesson plans that integrate our resources into the classroom and extracurricular activities; (3) engaging teachers by inviting collaborations and promoting our resources and activities; and (4) conducting educational research that provides a foundation for the other components. The paper describes specific educational resources and activities and grounds them in learning theories from the fields of cognitive psychology and science education.

Educating Young People about Environmental Health for Informed Social Action

PubMed Central

Keselman, Alla; Levin, Daniel M.; Kramer, Judy F.; Matzkin, Karen; Dutcher, Gale

2013-01-01

Whereas environmental health education is rapidly becoming a global priority, it still receives little attention in schools. This paper describes a U.S. National Library of Medicine program, aiming to support environmental health education in grades 6-12 in U.S. schools. The program has four components: (1) developing reliable online resources that provide quality environmental health information; (2) creating lesson plans that integrate our resources into the classroom and extracurricular activities; (3) engaging teachers by inviting collaborations and promoting our resources and activities; and (4) conducting educational research that provides a foundation for the other components. The paper describes specific educational resources and activities and grounds them in learning theories from the fields of cognitive psychology and science education. PMID:24383062

Advanced Rotorcraft Transmission (ART) program-Boeing helicopters status report

NASA Technical Reports Server (NTRS)

Lenski, Joseph W., Jr.; Valco, Mark J.

1991-01-01

The Advanced Rotorcraft Transmission (ART) program is structured to incorporate key emerging material and component technologies into an advanced rotorcraft transmission with the intention of making significant improvements in the state of the art (SOA). Specific objectives of ART are: (1) Reduce transmission weight by 25 pct.; (2) Reduce transmission noise by 10 dB; and (3) Improve transmission life and reliability, while extending Mean Time Between Removal to 5000 hr. Boeing selected a transmission sized for the Tactical Tilt Rotor (TTR) aircraft which meets the Future Air Attack Vehicle (FAVV) requirements. Component development testing will be conducted to evaluate the high risk concepts prior to finalizing the advanced transmission configuration. The results of tradeoff studies and development test which were completed are summarized.

The LATDYN user's manual

NASA Technical Reports Server (NTRS)

Housner, J. M.; Mcgowan, P. E.; Abrahamson, A. L.; Powell, M. G.

1986-01-01

The LATDYN User's Manual presents the capabilities and instructions for the LATDYN (Large Angle Transient DYNamics) computer program. The LATDYN program is a tool for analyzing the controlled or uncontrolled dynamic transient behavior of interconnected deformable multi-body systems which can undergo large angular motions of each body relative other bodies. The program accommodates large structural deformation as well as large rigid body rotations and is applicable, but not limited to, the following areas: (1) development of large flexible space structures; (2) slewing of large space structure components; (3) mechanisms with rigid or elastic components; and (4) robotic manipulations of beam members. Presently the program is limited to two dimensional problems, but in many cases, three dimensional problems can be exactly or approximately reduced to two dimensions. The program uses convected finite elements to affect the large angular motions involved in the analysis. General geometry is permitted. Detailed user input and output specifications are provided and discussed with example runstreams. To date, LATDYN has been configured for CDC/NOS and DEC VAX/VMS machines. All coding is in ANSII-77 FORTRAN. Detailed instructions regarding interfaces with particular computer operating systems and file structures are provided.

How we developed the GIM clinician-educator mentoring and scholarship program to assist faculty with promotion and scholarly work.

PubMed

Bertram, Amanda; Yeh, Hsin Chieh; Bass, Eric B; Brancati, Frederick; Levine, David; Cofrancesco, Joseph

2015-02-01

Clinician Educators' (CEs) focus on patient care and teaching, yet many academic institutions require dissemination of scholarly work for advancement. This can be difficult for CEs. Our division developed the Clinician-Educator Mentoring and Scholarship Program (CEMSP) in an effort to assist CEs with scholarship, national reputation, recognition, promotion and job satisfaction. The key components are salary-supported director and co-director who coordinate the program and serve as overall mentors and link CEs and senior faculty, and a full-time Senior Research Coordinator to assist with all aspects of scholarship, a close relationship with the General Internal Medicine (GIM) Methods Core provides advanced statistical support. Funding for the program comes from GIM divisional resources. Perceived value was evaluated by assessing the number of manuscripts published, survey of faculty regarding usage and opinion of CEMSP, and a review of faculty promotions. Although impossible to attribute the contributions of an individual component, a program specifically aimed at helping GIM CE faculty publish scholarly projects, increase participation in national organizations and focus on career progression can have a positive impact.

Understanding science teacher enhancement programs: Essential components and a model

NASA Astrophysics Data System (ADS)

Spiegel, Samuel Albert

Researchers and practioners alike recognize that "the national goal that every child in the United States has access to high-quality school education in science and mathematics cannot be realized without the availability of effective professional development of teachers" (Hewson, 1997, p. 16). Further, there is a plethora of reports calling for the improvement of professional development efforts (Guskey & Huberman, 1995; Kyle, 1995; Loucks-Horsley, Hewson, Love, & Stiles, 1997). In this study I analyze a successful 3-year teacher enhancement program, one form of professional development, to: (1) identify essential components of an effective teacher enhancement program; and (2) create a model to identify and articulate the critical issues in designing, implementing, and evaluating teacher enhancement programs. Five primary sources of information were converted into data: (1) exit questionnaires, (2) exit surveys, (3) exit interview transcripts, (4) focus group transcripts, and (5) other artifacts. Additionally, a focus group was used to conduct member checks. Data were analyzed in an iterative process which led to the development of the list of essential components. The Components are categorized by three organizers: Structure (e.g., science research experience, a mediator throughout the program), Context (e.g., intensity, collaboration), and Participant Interpretation (e.g., perceived to be "safe" to examine personal beliefs and practices, actively engaged). The model is based on: (1) a 4-year study of a successful teacher enhancement program; (2) an analysis of professional development efforts reported in the literature; and (3) reflective discussions with implementors, evaluators, and participants of professional development programs. The model consists of three perspectives, cognitive, symbolic interaction, and organizational, representing different viewpoints from which to consider issues relevant to the success of a teacher enhancement program. These perspectives influence and are examined across three settings, program, individual, and school. An over-arching theme, namely the content focus of the program, such as the teaching and learning of science illuminate both the perspectives and the settings. While the model was developed to understand and evaluate a specific program, it is hypothesized that it can be a powerful tool for designing and implementing a variety of programs.

A cross-sectional analysis of reported corporate environmental sustainability practices.

PubMed

Cowan, Dallas M; Dopart, Pamela; Ferracini, Tyler; Sahmel, Jennifer; Merryman, Kimberly; Gaffney, Shannon; Paustenbach, Dennis J

2010-12-01

The concept of sustainability evolved throughout the 1970s and 1980s, but was formally described by the 27 principles of the Rio Declaration on Environment and Development in 1992. Despite the passage of nearly 20years, to date there are no uniform set of federal rules, regulations, or guidelines specifically governing the environmental aspects of sustainability practices or related requirements in the United States. In this benchmark analysis, we have collected information on the sustainability programs of the five largest US companies in each of the 26 industrial sectors [based on the Forbes Global 2000 through 2009 (n=130)]. For each company, we reviewed the most recent corporate sustainability, citizenship, or responsibility report, limiting our scope to environmental components, if available. Ten criteria were identified and analyzed, including leadership, reporting, external review, certification, and individual components of environmental sustainability programs. With respect to the prevalence of sustainability components between various business sectors, we found that the Drugs and Biotechnology (87%), Household and Personal Products (87%) and Oil and Gas Operations (87%) industries had the most comprehensive environmental sustainability programs. Using the nine components of environmental sustainability as a benchmark, we identified four key components as the characteristics of the most comprehensive environmental sustainability programs. These were (1) empowering leadership with a commitment to sustainability (80%), (2) standardized reporting (87%), (3) third-party evaluation of the sustainability programs (73%), and (4) obtaining ISO 14001 certification (73%). We found that many firms shaped their own definition of sustainability and developed their associated sustainability programs based on their sector, stakeholder interests, products or services, and business model. We noted an emerging area that we have called product sustainability - one in which toxicologists and environmental scientists can play a vital role helping to ensure that a manufactured item will indeed be considered acceptable for distribution now, as well as in the coming years. Numerous examples or case studies are presented. Copyright © 2010 Elsevier Inc. All rights reserved.

Health promotion communications system: a model for a dispersed population.

PubMed

Foran, M; Campanelli, L C

1995-11-01

1. Corporations with geographically dispersed populations need to provide flexible health promotion programs tailored to meet specific employee interests and needs. 2. Bell Atlantic developed a dispersed model approach based on the transtheoretical model of behavior change. The key to this model is to identify at which stage the individual is operating and provide appropriate information and behavior change programs. 3. Components of the program include: health risk appraisal; exercise/activity tracking system; on line nurse health information service; network of fitness facilities; employee assistance programs; health library available by fax; health film library; network of health promotion volunteers; and targeted health and marketing messaged via corporate media.

Oak Ridge Environmental Information System (ORIES) site workstation information packet for OREIS V1.2. Environmental Restoration Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Voorhees, L.D.; McCord, R.A.; Durfee, R.C.

1993-02-01

The OREIS site workstation information packet was developed to accompany the OREIS site workstations, which are being delivered to the Environmental Restoration programs at the five DOE-OR sites. The packet is written specifically for the Site ER program staff at each of the five Sites who have been designated the OREIS contact by their ER program manager, and is not intended for general distribution. The packet provides an overview of the components of OREIS, points to more detailed information provided in the accompanying vendor and OREIS developed manuals, and includes information on training opportunities and user support.

Biosafety principles and practices for the veterinary diagnostic laboratory.

PubMed

Kozlovac, Joseph; Schmitt, Beverly

2015-01-01

Good biosafety and biocontainment programs and practices are critical components of the successful operation of any veterinary diagnostic laboratory. In this chapter we provide information and guidance on critical biosafety management program elements, facility requirements, protective equipment, and procedures necessary to ensure that the laboratory worker and the environment are adequately protected in the challenging work environment of the veterinary diagnostic laboratory in general and provide specific guidance for those laboratories employing molecular diagnostic techniques.

24 CFR 990.245 - Types of appeals.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Types of appeals. 990.245 Section... THE PUBLIC HOUSING OPERATING FUND PROGRAM Appeals § 990.245 Types of appeals. (a) Streamlined appeal. This appeal would demonstrate that the application of a specific Operating Fund formula component has a...

Information Power Goes Online: Teaching Information Literacy to Distance Learners.

ERIC Educational Resources Information Center

Parise, Pierina

1998-01-01

Describes how a course, "Information Power," at Marylhurst University (Oregon) was developed into an online version. Presents an overview of Web access in distance learning. Discusses instructional delivery through the WebCT software program; specific components of the online Information Power class; measuring learning outcomes; and pros and cons…

The HAWK Highway: A Vertical Model for Student IEP Participation

ERIC Educational Resources Information Center

Quann, Monica; Lyman, Jennifer; Crumlish, Jamie; Hines, Sally; Williams, Lynn; Pleet-Odle, Amy; Eisenman, Laura

2015-01-01

Special educators at an inclusive career-technical high school created a model to support annually increasing expectations for self-determination and levels of student participation in Individualized Education Program (IEP) planning and implementation. The grade-specific components of the model and supporting context are described. Students were…

Systems for the expression of orthogonal translation components in eubacterial host cells

DOEpatents

Ryu, Youngha; Schultz, Peter G.

2013-01-22

The invention related to compositions and methods for the in vivo production of polypeptides comprising one or more unnatural amino acids. Specifically, the invention provides plasmid systems for the efficient eubacterial expression of polypeptides comprising one or more unnatural acids at genetically-programmed positions.

Report of the Anthropology Curriculum Study Project-Research Program.

ERIC Educational Resources Information Center

Parsons, T. W.; And Others

The study evaluated an Anthropology Curriculum Study Project course, "Patterns in Human History," used with high school students in a one year field test situation. Ethnographic and cognitive components of the curriculum were examined. The specific objective of the research was to examine the behavioral effects on students, teachers, and…

Facilitating Emergent Literacy Skills in Children with Hearing Loss

ERIC Educational Resources Information Center

Zupan, Barbra; Dempsey, Lynn

2013-01-01

Purpose: To (a) familiarize readers with the components of emergent literacy and the impact hearing loss may have on the development of these skills; (b) demonstrate the importance of parent-professional collaboration and show how specific literacy-based activities can be integrated into existing daily routines and intervention programming; and…

The GSFC Battery Workshop

NASA Technical Reports Server (NTRS)

1974-01-01

The proceedings of a conference on electric storage batteries are presented. The subjects discussed include the following: (1) a low cost/standardization program, (2) test and flight experience, (3) materials and cell components, and (4) new developments in the nickel/hydrogen system. The application of selected batteries in specific space vehicles is examined.

Lights, Camera, Action: Facilitating PETE Students' Reflection through Film

ERIC Educational Resources Information Center

Lee, Okseon; Ravizza, Dean; Lee, Myung-Ah

2009-01-01

Preparing teacher candidates to be reflective professionals is a critical component of physical education teacher education programs. Although many specific strategies have been developed to facilitate post-lesson reflection, strategies for reflecting on future work and professional life have not been widely explored. As a way to facilitate…

Service Learning: A Valuable Experience

ERIC Educational Resources Information Center

Fowler, William E.; Stovall, O. Scott; Neill, John D.

2005-01-01

In this paper, we describe how our department recently incorporated a major service learning component into the curriculum. Specifically, we employed participation in the IRS's Volunteer Income Tax Assistance (VITA) program as an effective means of experiential and service learning for the past two years for Masters of Accountancy students. We…

Are Creativity Tests Susceptible to Coaching?

ERIC Educational Resources Information Center

Fairweather, Elizabeth C.; Cramond, Bonnie; Landis, Rebecca Nordin

2015-01-01

Critics of creativity tests, some of which are used widely in determining student eligibility for special educational opportunities such as gifted programs, claim that scores on these tests can be improved with specific training on the scoring components of the tests. However, we could find no empirical evidence supporting this claim. So, we…

Custom Sewing, Modules One, Two, and Three. Instructor Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This document consists of three modules designed for a custom apparel and garment sewing program teaching students to construct, alter, and prepare garments and home fashions to customer specifications. Each module includes some or all of the following components: performance objectives, lesson plans, suggested activities, information sheets,…

Unheard Voices: A Section 353 Special Project. Final Report.

ERIC Educational Resources Information Center

Strunk, Sandra J.

"Unheard Voices" was a project designed to provide adult educators with specific guidelines and ideas for integrating a creative writing component into an existing program of adult basic education, General Educational Development, or English as a second language. The project also collected and published student poetry and fiction in…

Using Community Assessments to Improve 4-H Youth Development Programming Efforts

ERIC Educational Resources Information Center

Teuteberg, Dan; Cummins, Melissa M.

2017-01-01

Understanding resources available in a community is essential before any 4-H youth development professional can begin addressing local needs. Conducting a community assessment generates valuable information about the unique components and resources of a specific community. This information then provides a foundation for identifying specific…

Systems for the expression of orthogonal translation components in eubacterial host cells

DOEpatents

Ryu, Youngha [San Diego, CA; Schultz, Peter G [La Jolla, CA

2011-06-14

The invention relates to compositions and methods for the in vivo production of polypeptides comprising one or more unnatural amino acids. Specifically, the invention provides plasmid systems for the efficient eubacterial expression of polypeptides comprising one or more unnatural amino acids at genetically-programmed positions.

Systems for the expression of orthogonal translation components eubacterial host cells

DOEpatents

Ryu, Youngha [San Diego, CA; Schultz, Peter G [La Jolla, CA

2012-06-12

The invention relates to compositions and methods for the in vivo production of polypeptides comprising one or more unnatural amino acids. Specifically, the invention provides plasmid systems for the efficient eubacterial expression of polypeptides comprising one or more unnatural amino acids at genetically-programmed positions.

The Outward Bound Solo: A Study of Participants' Perceptions

ERIC Educational Resources Information Center

Kalisch, Kenneth R.; Bobilya, Andrew J.; Daniel, Brad

2011-01-01

Research on wilderness experience programs indicates there is much to learn about specific components of the overall experience. The solo, where students are intentionally separated from their expedition group for an extended time for reflection, has long had an anecdotal reputation for enhancing the quality of participants' experiences. The…

Component Framework for Loosely Coupled High Performance Integrated Plasma Simulations

NASA Astrophysics Data System (ADS)

Elwasif, W. R.; Bernholdt, D. E.; Shet, A. G.; Batchelor, D. B.; Foley, S.

2010-11-01

We present the design and implementation of a component-based simulation framework for the execution of coupled time-dependent plasma modeling codes. The Integrated Plasma Simulator (IPS) provides a flexible lightweight component model that streamlines the integration of stand alone codes into coupled simulations. Standalone codes are adapted to the IPS component interface specification using a thin wrapping layer implemented in the Python programming language. The framework provides services for inter-component method invocation, configuration, task, and data management, asynchronous event management, simulation monitoring, and checkpoint/restart capabilities. Services are invoked, as needed, by the computational components to coordinate the execution of different aspects of coupled simulations on Massive parallel Processing (MPP) machines. A common plasma state layer serves as the foundation for inter-component, file-based data exchange. The IPS design principles, implementation details, and execution model will be presented, along with an overview of several use cases.

WAG 2 remedial investigation and site investigation site-specific work plan/health and safety checklist for the soil and sediment task. Environmental Restoration Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holt, V.L.; Burgoa, B.B.

1993-12-01

This document is a site-specific work plan/health and safety checklist (WP/HSC) for a task of the Waste Area Grouping 2 Remedial Investigation and Site Investigation (WAG 2 RI&SI). Title 29 CFR Part 1910.120 requires that a health and safety program plan that includes site- and task-specific information be completed to ensure conformance with health- and safety-related requirements. To meet this requirement, the health and safety program plan for each WAG 2 RI&SI field task must include (1) the general health and safety program plan for all WAG 2 RI&SI field activities and (2) a WP/HSC for that particular field task.more » These two components, along with all applicable referenced procedures, must be kept together at the work site and distributed to field personnel as required. The general health and safety program plan is the Health and Safety Plan for the Remedial Investigation and Site Investigation of Waste Area Grouping 2 at the Oak Ridge National Laboratory, Oak Ridge, Tennessee (ORNL/ER-169). The WP/HSCs are being issued as supplements to ORNL/ER-169.« less

Training hospital managers for strategic planning and management: a prospective study.

PubMed

Terzic-Supic, Zorica; Bjegovic-Mikanovic, Vesna; Vukovic, Dejana; Santric-Milicevic, Milena; Marinkovic, Jelena; Vasic, Vladimir; Laaser, Ulrich

2015-02-26

Training is the systematic acquisition of skills, rules, concepts, or attitudes and is one of the most important components in any organization's strategy. There is increasing demand for formal and informal training programs especially for physicians in leadership positions. This study determined the learning outcomes after a specific training program for hospital management teams. The study was conducted during 2006 and 2007 at the Centre School of Public Health and Management, Faculty of Medicine, University of Belgrade and included 107 participants involved in the management in 20 Serbian general hospitals. The management teams were multidisciplinary, consisting of five members on average: the director of the general hospital, the deputy directors, the head nurse, and the chiefs of support services. The managers attended a training program, which comprised four modules addressing specific topics. Three reviewers independently evaluated the level of management skills at the beginning and 12 months after the training program. Principal component analysis and subsequent stepwise multiple linear regression analysis were performed to determine predictors of learning outcomes. The quality of the SWOT (strengths, weaknesses, opportunities and threats) analyses performed by the trainees improved with differences between 0.35 and 0.49 on a Likert scale (p < 0.001). Principal component analysis explained 81% of the variance affecting their quality of strategic planning. Following the training program, the external environment, strategic positioning, and quality of care were predictors of learning outcomes. The four regression models used showed that the training program had positive effects (p < 0.001) on the ability to formulate a Strategic Plan comprising the hospital mission, vision, strategic objectives, and action plan. This study provided evidence that training for strategic planning and management enhanced the strategic decision-making of hospital management teams, which is a requirement for hospitals in an increasingly competitive, complex and challenging context. For the first time, half of state general hospitals involved in team training have formulated the development of an official strategic plan. The positive effects of the formal training program justify additional investment in future education and training.

The Emerging Role of Insulin and Insulin-Like Growth Factor Signaling in Cancer Stem Cells

PubMed Central

Malaguarnera, Roberta; Belfiore, Antonino

2014-01-01

Cancer cells frequently exploit the IGF signaling, a fundamental pathway mediating development, cell growth, and survival. As a consequence, several components of the IGF signaling are deregulated in cancer and sustain cancer progression. However, specific targeting of IGF-IR in humans has resulted efficacious only in small subsets of cancers, making researches wondering whether IGF system targeting is still worth pursuing in the clinical setting. Although no definite answer is yet available, it has become increasingly clear that other components of the IGF signaling pathway, such as IR-A, may substitute for the lack of IGF-IR, and induce cancer resistance and/or clonal selection. Moreover, accumulating evidence now indicates that IGF signaling is a central player in the induction/maintenance of epithelial mesenchymal transition (EMT) and cell stemness, two strictly related programs, which play a key role in metastatic spread and resistance to cancer treatments. Here we review the evidences indicating that IGF signaling enhances the expression of transcription factors implicated in the EMT program and has extensive cross-talk with specific pathways involved in cell pluripotency and stemness maintenance. In turn, EMT and cell stemness activate positive feed-back mechanisms causing up-regulation of various IGF signaling components. These findings may have novel translational implications. PMID:24550888

Identifying Variability in Permanent Supportive Housing: A comparative effectiveness approach to measuring health outcomes

PubMed Central

Dickson-Gomez, Julia; Quinn, Katherine; Bendixen, Arturo; Johnson, Amy; Nowicki, Kelly; Ko, Thant Ko; Galletly, Carol

2017-01-01

Supportive housing has become the dominant model in the United States to provide housing to chronically homeless and to improve their housing stability and health. Most supportive housing programs follow a “housing first” paradigm modeled after the Pathways to Housing program in New York City. However, components of housing first supportive housing models were poorly defined and supportive models have varied considerably in their dissemination and implementation to other parts of the country. Recently, research has been conducted to determine the fidelity by which specific housing programs adhere to the Pathways Housing First model. However, evidence regarding which combination of components leads to better health outcomes for particular subpopulations is lacking. This paper presents results from qualitative interviews with supportive housing providers in the Chicago Metropolitan area. Supportive housing varied according to housing configuration (scattered-site versus project-based) and service provision model (low-intensity case management, intensive case management and behavioral health) resulting in six basic types. Supportive housing programs also differed in services they provided in addition to case management and the extent to which they followed harm reduction versus abstinence policies. Results showed advantages and disadvantages to each of the six basic types. Comparative effectiveness research may help identify which program components lead to better health outcomes among different subpopulations of homeless. Future longitudinal research will use the identified typology and other factors to compare the housing stability and health outcomes of supportive housing residents in programs that differ along these dimensions. PMID:28301175

[Scales to measure parents and caretakers satisfaction with the food and nutrition component of Child care Centers].

PubMed

Bernal, Jennifer; Lorenzana, Paulina

2002-06-01

Two Likert-type scales for measuring parents' and caretakers' level of satisfaction with the food and nutrition services offered at childcare multi-centers in a peri-urban community in Caracas, were developed and validated. An intentional sample of 20 parents and caretakers were interviewed within the naturalistic-constructivist perspective, to capture their perceptions of distinct aspects of the food and nutrition components of the program. Categories emerged from the interviews that served to construct the items for two scales that measure level of satisfaction of parents and caretakers with the food and nutrition aspects of the program. To validate the scales, they were applied to 73 parents and 32 caretakers. Factor and multiple components analysis showed that overall, the scales explained 61% and 69% of the variation in level of satisfaction of parents and caretakers respectively. Confiability measured with Alpha Cronbach coefficient was 0.74 and 0.77 for parents' and caretakers' scales respectively. These results reveal scales that have content validity and good reliability. Besides, the scales detect specific aspects of the food and nutrition service that should be reinforced or modified, to make the Child-care Centers program more effective and efficient. External validation of the scales is recommended, since they provide an instrument capable of capturing useful information for monitoring and evaluating the Child-care Centers program nation-wide, from the perspective of program managers and parents of program users.

Composite material application for liquid rocket engines

NASA Technical Reports Server (NTRS)

Heubner, S. W.

1982-01-01

With increasing emphasis on improving engine thrust-to-weight ratios to provide improved payload capabilities, weight reductions achievable by the use of composites have become attractive. Of primary significance is the weight reduction offered by composites, although high temperature properties and cost reduction were also considered. The potential for application of composites to components of Earth-to-orbit hydrocarbon engines and orbit-to-orbit LOX/H2 engines was assessed. The components most likely to benefit from the application of composites were identified, as were the critical technology areas where developed would be required. Recommendations were made and a program outlined for the design, fabrication, and demonstration of specific engine components.

Contemporary issues in HIM. The application layer--III.

PubMed

Wear, L L; Pinkert, J R

1993-07-01

We have seen document preparation systems evolve from basic line editors through powerful, sophisticated desktop publishing programs. This component of the application layer is probably one of the most used, and most readily identifiable. Ask grade school children nowadays, and many will tell you that they have written a paper on a computer. Next month will be a "fun" tour through a number of other application programs we find useful. They will range from a simple notebook reminder to a sophisticated photograph processor. Application layer: Software targeted for the end user, focusing on a specific application area, and typically residing in the computer system as distinct components on top of the OS. Desktop publishing: A document preparation program that begins with the text features of a word processor, then adds the ability for a user to incorporate outputs from a variety of graphic programs, spreadsheets, and other applications. Line editor: A document preparation program that manipulates text in a file on the basis of numbered lines. Word processor: A document preparation program that can, among other things, reformat sections of documents, move and replace blocks of text, use multiple character fonts, automatically create a table of contents and index, create complex tables, and combine text and graphics.

TADPLOT program, version 2.0: User's guide

NASA Technical Reports Server (NTRS)

Hammond, Dana P.

1991-01-01

The TADPLOT Program, Version 2.0 is described. The TADPLOT program is a software package coordinated by a single, easy-to-use interface, enabling the researcher to access several standard file formats, selectively collect specific subsets of data, and create full-featured publication and viewgraph quality plots. The user-interface was designed to be independent from any file format, yet provide capabilities to accommodate highly specialized data queries. Integrated with an applications software network, data can be assessed, collected, and viewed quickly and easily. Since the commands are data independent, subsequent modifications to the file format will be transparent, while additional file formats can be integrated with minimal impact on the user-interface. The graphical capabilities are independent of the method of data collection; thus, the data specification and subsequent plotting can be modified and upgraded as separate functional components. The graphics kernel selected adheres to the full functional specifications of the CORE standard. Both interface and postprocessing capabilities are fully integrated into TADPLOT.

Temperature Programmed Desorption of Quench-condensed Krypton and Acetone in Air; Selective Concentration of Ultra-trace Gas Components.

PubMed

Suzuki, Taku T; Sakaguchi, Isao

2016-01-01

Selective concentration of ultra-trace components in air-like gases has an important application in analyzing volatile organic compounds in the gas. In the present study, we examined quench-condensation of the sample gas on a ZnO substrate below 50 K followed by temperature programmed desorption (TPD) (low temperature TPD) as a selective gas concentration technique. We studied two specific gases in the normal air; krypton as an inert gas and acetone as a reactive gas. We evaluated the relationship between the operating condition of low temperature TPD and the lowest detection limit. In the case of krypton, we observed the selective concentration by exposing at 6 K followed by thermal desorption at about 60 K. On the other hand, no selectivity appeared for acetone although trace acetone was successfully concentrated. This is likely due to the solvent effect by a major component in the air, which is suggested to be water. We suggest that pre-condensation to remove the water component may improve the selectivity in the trace acetone analysis by low temperature TPD.

Intelligent Engine Systems: Thermal Management and Advanced Cooling

NASA Technical Reports Server (NTRS)

Bergholz, Robert

2008-01-01

The objective of the Advanced Turbine Cooling and Thermal Management program is to develop intelligent control and distribution methods for turbine cooling, while achieving a reduction in total cooling flow and assuring acceptable turbine component safety and reliability. The program also will develop embedded sensor technologies and cooling system models for real-time engine diagnostics and health management. Both active and passive control strategies will be investigated that include the capability of intelligent modulation of flow quantities, pressures, and temperatures both within the supply system and at the turbine component level. Thermal management system concepts were studied, with a goal of reducing HPT blade cooling air supply temperature. An assessment will be made of the use of this air by the active clearance control system as well. Turbine component cooling designs incorporating advanced, high-effectiveness cooling features, will be evaluated. Turbine cooling flow control concepts will be studied at the cooling system level and the component level. Specific cooling features or sub-elements of an advanced HPT blade cooling design will be downselected for core fabrication and casting demonstrations.

Self-management support programs for persons with Parkinson's disease: An integrative review.

PubMed

Kessler, Dorothy; Liddy, Clare

2017-10-01

To identify the characteristics of self-management programs for persons with Parkinson's disease and the evidence for their effectiveness. An integrative literature review was conducted. Studies describing the provision or outcomes of self-management interventions for persons with Parkinson's disease and published in English were included. Two reviewers independently screened and evaluated articles. Interventions were described and compared, and evidence was presented using The Traffic Lighting system. Eighteen interventions were identified, representing a variety of group- and individual-based interventions that differed in structure, components, and outcomes. Notably, 89% were designed specifically for persons with Parkinson's disease and 39% combined self-management support with other therapies. Evidence to support specific self-management programs for persons with Parkinson's disease was limited. However, a moderate quality systematic review and a good quality RCT supported self-management for improving specific domains of quality of life. A variety of interventions have been designed to support self-management by persons with Parkinson's disease. More research is needed to identify key active ingredients and determine which programs are most effective. Self-management programs embedded within rehabilitation are promising. Clinicians should ensure programs include goal setting and problem solving and consider the inclusion of caregivers and peer support. Copyright © 2017 Elsevier B.V. All rights reserved.

Let's face it: patient and parent perspectives on incorporating a Facebook group into a multidisciplinary weight management program.

PubMed

Woolford, Susan J; Esperanza Menchaca, Alicia D M; Sami, Areej; Blake, Natalie

2013-08-01

Social media may have the potential to enhance weight management efforts. However, the acceptability of incorporating this entity into pediatrics is unknown. The objective of this project was to explore patients' and parents' perspectives about developing a Facebook group as a component of a pediatric weight management program. Semistructured interviews were performed between September, 2011, and February, 2012, with patients and parents in a multidisciplinary weight management program. Interviews explored participants' perceptions of potential benefits, concerns, and preferences related to a program-specific Facebook group. Transcripts were reviewed and themes identified. The study concluded when thematic saturation was achieved. Participants (n=32) were largely enthusiastic about the idea of a program-specific Facebook group for adolescents. Most preferred a secret group, where only participants would know of the group's existence or group members' identity. No parents expressed concern about security or privacy related to a program-specific Facebook group; one parent expressed concern about undesirable advertisements. Participants endorsed a variety of ideas for inclusion on the page, including weight loss tips, live chats with providers, quizzes, and an incentive system where participants could gain points for making healthy choices. Many parents requested a separate parent-focused page, an idea that was supported by the adolescents. This study suggests that participants perceive potential benefits from incorporating social media interventions into pediatric weight management efforts. Privacy and security issues do not appear to be major parental concerns. Future work should explore the impact of program-specific social media interventions on outcomes for patients in weight management programs.

Status and Assessment of Chesapeake Bay Wildlife Contamination

USGS Publications Warehouse

Heinz, G.H.; Wiemeyer, Stanley N.; Clark, D.R.; Albers, P.H.; Henry, P.; Batiuk, R.A.

1992-01-01

As an integral component of its priority setting process, the Chesapeake Bay Program`s Toxics Subcommittee has sought the expertise of Chesapeake Bay researchers and managers in developing a series of Chesapeake Bay toxics status and assessment papers. In the report, evidence for historical and current contaminant effects on key bird species, mammals, reptiles and amphibians which inhabit the Chesapeake Bay basin is examined. For each group of wildlife species, a general overview of effects caused by specific toxic substances is followed by detailed accounts of contaminant effects on selected species. Sponsored by Environmental Protection Agency, Annapolis, MD. Chesapeake Bay Program.

Safety considerations in the design and operation of large wind turbines

NASA Technical Reports Server (NTRS)

Reilly, D. H.

1979-01-01

The engineering and safety techniques used to assure the reliable and safe operation of large wind turbine generators utilizing the Mod 2 Wind Turbine System Program as an example is described. The techniques involve a careful definition of the wind turbine's natural and operating environments, use of proven structural design criteria and analysis techniques, an evaluation of potential failure modes and hazards, and use of a fail safe and redundant component engineering philosophy. The role of an effective quality assurance program, tailored to specific hardware criticality, and the checkout and validation program developed to assure system integrity are described.

Integrating bioethics into postgraduate medical education: the University of Toronto model.

PubMed

Howard, Frazer; McKneally, Martin F; Levin, Alex V

2010-06-01

Bioethics training is a vital component of postgraduate medical education and required by accreditation organizations in Canada and the United States. Residency program ethics curricula should ensure trainees develop core knowledge, skills, and competencies, and should encourage lifelong learning and teaching of bioethics. Many physician-teachers, however, feel unprepared to teach bioethics and face challenges in developing and implementing specialty-specific bioethics curricula. The authors present, as one model, the innovative strategies employed by the University of Toronto Joint Centre for Bioethics. They postulate that centralized support is a key component to ensure the success of specialty-specific bioethics teaching, to reinforce the importance of ethics in medical training, and to ensure it is not overshadowed by other educational concerns.

Communication strategies to optimize commitments and investments in iron programming.

PubMed

Griffiths, Marcia

2002-04-01

There is consensus that a communications component is crucial to the success of iron supplementation and fortification programs. However, in many instances, we have not applied what we know about successful advocacy and program communications to iron programs. Communication must play a larger and more central role in iron programs to overcome several common shortcomings and allow the use of new commitments and investments in iron programming to optimum advantage. One shortcoming is that iron program communication has been driven primarily by the supply side of the supply-demand continuum. That is, technical information has been given without thought for what people want to know or do. To overcome this, the communication component, which should be responsive to the consumer perspective, must be considered at program inception, not enlisted late in the program cycle as a remedy when interventions fail to reach their targets. Another shortcoming is the lack of program focus on behavior. Because the "technology" of iron, a supplement, or fortified or specific local food must be combined with appropriate consumer behavior, it is not enough to promote the technology. The appropriate use of technology must be ensured, and this requires precise and strategically crafted communications. A small number of projects from countries as diverse as Indonesia, Egypt, Nicaragua and Peru offer examples of successful communications efforts and strategies for adaptation by other countries.

Antimicrobial stewardship in long term care facilities: what is effective?

PubMed

Nicolle, Lindsay E

2014-02-12

Intense antimicrobial use in long term care facilities promotes the emergence and persistence of antimicrobial resistant organisms and leads to adverse effects such as C. difficile colitis. Guidelines recommend development of antimicrobial stewardship programs for these facilities to promote optimal antimicrobial use. However, the effectiveness of these programs or the contribution of any specific program component is not known. For this review, publications describing evaluation of antimicrobial stewardship programs for long term care facilities were identified through a systematic literature search. Interventions included education, guidelines development, feedback to practitioners, and infectious disease consultation. The studies reviewed varied in types of facilities, interventions used, implementation, and evaluation. Comprehensive programs addressing all infections were reported to have improved antimicrobial use for at least some outcomes. Targeted programs for treatment of pneumonia were minimally effective, and only for indicators of uncertain relevance for stewardship. Programs focusing on specific aspects of treatment of urinary infection - limiting treatment of asymptomatic bacteriuria or prophylaxis of urinary infection - were reported to be effective. There were no reports of cost-effectiveness, and the sustainability of most of the programs is unclear. There is a need for further evaluation to characterize effective antimicrobial stewardship for long term care facilities.

Near-term hybrid vehicle program, phase 1

NASA Technical Reports Server (NTRS)

1979-01-01

The preliminary design of a hybrid vehicle which fully meets or exceeds the requirements set forth in the Near Term Hybrid Vehicle Program is documented. Topics addressed include the general layout and styling, the power train specifications with discussion of each major component, vehicle weight and weight breakdown, vehicle performance, measures of energy consumption, and initial cost and ownership cost. Alternative design options considered and their relationship to the design adopted, computer simulation used, and maintenance and reliability considerations are also discussed.

High-Power Microwave Transmission and Mode Conversion Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vernon, Ronald J.

2015-08-14

This is a final technical report for a long term project to develop improved designs and design tools for the microwave hardware and components associated with the DOE Plasma Fusion Program. We have developed basic theory, software, fabrication techniques, and low-power measurement techniques for the design of microwave hardware associated gyrotrons, microwave mode converters and high-power microwave transmission lines. Specifically, in this report we discuss our work on designing quasi-optical mode converters for single and multiple frequencies, a new method for the analysis of perturbed-wall waveguide mode converters, perturbed-wall launcher design for TE0n mode gyrotrons, quasi-optical traveling-wave resonator design formore » high-power testing of microwave components, and possible improvements to the HSX microwave transmission line.« less

Georgia Vocational Student Assessment Project. Final Report.

ERIC Educational Resources Information Center

Vocational Technical Education Consortium of States, Atlanta, GA.

A project was conducted to develop vocational education tests for use in Georgia secondary schools, specifically for welding, machine shop, and sheet metal courses. The project team developed an outline of an assessment model that included the following components: (1) select a program for use in developing test items; (2) verify duties, tasks,…

"M" to "Moonless": Lexical Databases in Development.

ERIC Educational Resources Information Center

Beam, Paul; Huntley, Frank

This paper describes the characteristics of lexicographic software programs used in a module on Alexander Pope's "The Rape of the Lock," a major component of a course on computer-assisted learning (CAL) at the University of Waterloo in Ontario, Canada. Two of the databases are specific to that school and are small, individualized, and…

Educational Quality in Music Teacher Education: Components of a Foundation for Research

ERIC Educational Resources Information Center

Johansen, Geir

2007-01-01

Increasing demands for educational quality in higher education affect both higher music education and music teacher education. A theoretical framework is needed if we are to question what is meant by "educational quality" in the latter. To establish programs for quality development and assessment requires basic subject-specific research on the…

Training the Trainers: Learning to Be a Principal Supervisor

ERIC Educational Resources Information Center

Saltzman, Amy

2017-01-01

While most principal supervisors are former principals themselves, few come to the role with specific training in how to do the job effectively. For this reason, both the Washington, D.C., and Tulsa, Oklahoma, principal supervisor programs include a strong professional development component. In this article, the author takes a look inside these…

78 FR 66008 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-04

... developing recommendations, future research and program needs concerning home- testing for MSM. Specific Aims... Manhunt and Adam4Adam. This study also has a qualitative component that aims to examine the experiences of participants in the randomized control trial (RCT). Participants for the qualitative data collection will be...

Gatekeeping and Competency-Based Education: Developing Behaviorally Specific Remediation Policies

ERIC Educational Resources Information Center

Hylton, Mary E.; Manit, Jill; Messick-Svare, Gloria

2017-01-01

Gatekeeping has long been an integral component of what is now referred to as the Implicit Curriculum, or the context in which professional social work education occurs. Despite its long-standing role within social work education, gatekeeping elicits conflict for both individual faculty members and entire programs of social work education. Much of…

USGS EDMAP Program-Training the Next Generation of Geologic Mappers

USGS Publications Warehouse

,

2010-01-01

EDMAP is an interactive and meaningful program for university students to gain experience and knowledge in geologic mapping while contributing to national efforts to map the geology of the United States. It is a matching-funds grant program with universities and is one of the three components of the congressionally mandated U.S. Geological Survey (USGS) National Cooperative Geologic Mapping Program. Geology professors whose specialty is geologic mapping request EDMAP funding to support upper-level undergraduate and graduate students at their colleges or universities in a 1-year mentor-guided geologic mapping project that focuses on a specific geographic area. Every Federal dollar that is awarded is matched with university funds.

Participation in Training for Depression Care Quality Improvement: A Randomized Trial of Community Engagement or Technical Support.

PubMed

Chung, Bowen; Ngo, Victoria K; Ong, Michael K; Pulido, Esmeralda; Jones, Felica; Gilmore, James; Stoker-Mtume, Norma; Johnson, Megan; Tang, Lingqi; Wells, Kenneth Brooks; Sherbourne, Cathy; Miranda, Jeanne

2015-08-01

Community engagement and planning (CEP) could improve dissemination of depression care quality improvement in underresourced communities, but whether its effects on provider training participation differ from those of standard technical assistance, or resources for services (RS), is unknown. This study compared program- and staff-level participation in depression care quality improvement training among programs enrolled in CEP, which trained networks of health care and social-community agencies jointly, and RS, which provided technical support to individual programs. Matched programs from health care and social-community service sectors in two communities were randomly assigned to RS or CEP. Data were from 1,622 eligible staff members from 95 enrolled programs. Primary outcomes were any staff trained (for programs) and total hours of training (for staff). Secondary staff-level outcomes were hours of training in specific depression collaborative care components. CEP programs were more likely than RS programs to participate in any training (p=.006). Within health care sectors, CEP programs were more likely than RS programs to participate in training (p=.016), but within social-community sectors, there was no difference in training by intervention. Among staff who participated in training, mean training hours were greater among CEP programs versus RS programs for any type of training (p<.001) and for training related to each component of depression care (p<.001) except medication management. CEP may be an effective strategy to promote staff participation in depression care improvement efforts in underresourced communities.

Development of Integrated Programs for Aerospace-vehicle design (IPAD): Integrated information processing requirements

NASA Technical Reports Server (NTRS)

Southall, J. W.

1979-01-01

The engineering-specified requirements for integrated information processing by means of the Integrated Programs for Aerospace-Vehicle Design (IPAD) system are presented. A data model is described and is based on the design process of a typical aerospace vehicle. General data management requirements are specified for data storage, retrieval, generation, communication, and maintenance. Information management requirements are specified for a two-component data model. In the general portion, data sets are managed as entities, and in the specific portion, data elements and the relationships between elements are managed by the system, allowing user access to individual elements for the purpose of query. Computer program management requirements are specified for support of a computer program library, control of computer programs, and installation of computer programs into IPAD.

Fine-Tuning Summer Research Programs to Promote Underrepresented Students' Persistence in the STEM Pathway.

PubMed

Ghee, Medeva; Keels, Micere; Collins, Deborah; Neal-Spence, Cynthia; Baker, Earnestine

Although the importance of undergraduate research experiences in preparing students for graduate study and research careers is well documented, specific examination of program components is needed to assess the impact of these programs on underrepresented (UR) students. The Leadership Alliance, a consortium of leading PhD-granting and minority-serving institutions (MSIs), has leveraged its diverse partnership to place UR students from MSI and non-MSI institutions in competitive research environments through its national Summer Research Early Identification Program. Using longitudinal pre/post data collected from student surveys, we applied social cognitive career theory as a conceptual framework to examine how research engagement, skill development, and mentorship aspects of a summer research program affect students' commitment to pursue research careers. Self-reported knowledge of research skills, time engaged in research activity, and students' understanding of and attitudes toward pursuing graduate study were measured in relation to the classification of students' home undergraduate institution, level of students' pre-existing research experience, and demographic factors. Our results provide evidence of specific programmatic components that are beneficial for UR students from varying academic and cultural backgrounds. This study describes important aspects of summer research programs that will contribute to students' ability to persist in science careers. © 2016 M. Ghee et al. CBE—Life Sciences Education © 2016 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

2nd Generation Reusable Launch Vehicle (2G RLV). Revised

NASA Technical Reports Server (NTRS)

Matlock, Steve; Sides, Steve; Kmiec, Tom; Arbogast, Tim; Mayers, Tom; Doehnert, Bill

2001-01-01

This is a revised final report and addresses all of the work performed on this program. Specifically, it covers vehicle architecture background, definition of six baseline engine cycles, reliability baseline (space shuttle main engine QRAS), and component level reliability/performance/cost for the six baseline cycles, and selection of 3 cycles for further study. This report further addresses technology improvement selection and component level reliability/performance/cost for the three cycles selected for further study, as well as risk reduction plans, and recommendation for future studies.

NASP X-30 Propulsion technology status

NASA Technical Reports Server (NTRS)

Powell, William E.

1992-01-01

The performance goals of the NASP program require an aero-propulsion system with a high effective specific impulse. In order to achieve these goals, the high potential performance of air-breathing engines must be achieved over a very wide Mach number operating range. This, in turn, demands high component performance and involves many important technical issues which must be resolved. Scramjet Propulsion Technology is divided into five major areas: (1) inlets, (2) combustors, (3) nozzles, (4) component integration, and (5) test facilities. A status report covering the five areas is presented.

Directions in implementation research methods for behavioral and social science.

PubMed

Irwin, Molly; Supplee, Lauren H

2012-10-01

There is a growing interest, by researchers, policymakers, and practitioners, in evidence-based policy and practice. As a result, more dollars are being invested in program evaluation in order to establish "what works," and in some cases, funding is specifically tied to those programs found to be effective. However, reproducing positive effects found in research requires more than simply adopting an evidence-based program. Implementation research can provide guidance on which components of an intervention matter most for program impacts and how implementation components can best be implemented. However, while the body of rigorous research on effective practices continues to grow, research on implementation lags behind. To address these issues, the Administration for Children and Families and federal partners convened a roundtable meeting entitled, Improving Implementation Research Methods for Behavioral and Social Science, in the fall of 2010. This special section of the Journal of Behavioral Health Services & Research includes papers from the roundtable and highlights the role implementation science can play in shedding light on the difficult task of taking evidence-based practices to scale.

So, You Want to be a Science Communicator?

NASA Astrophysics Data System (ADS)

Radzilowicz, John G.

2009-03-01

The late Carl Sagan opined that somehow we have managed to create a global civilization dependant on science and technology in which almost no one understands science and technology. This is an unacceptable recipe for disaster with social, political and financial implications for the future of scientific research. And so, like it or not, popular science communication, more than ever before, is an important and necessary part of the scientific enterprise. Public outreach programs, media interviews, and popular articles have become required parts of the scientist's professional repertoire. But, what does it take to be a good science communicator? What is needed to develop and deliver meaningful public outreach programs? How do you handle non-technical presentations? And, what help is available in developing the necessary skills for good popular science communication? This presentation will look at the essential components of effective science communication aimed at a broad public audience. The components of successful science communication in programs, presentations and articles will be discussed. Specific attention will be given to how university-museum partnerships can expand the reach and enhance the quality of public outreach programs.

Ahead of the game protocol: a multi-component, community sport-based program targeting prevention, promotion and early intervention for mental health among adolescent males.

PubMed

Vella, Stewart A; Swann, Christian; Batterham, Marijka; Boydell, Katherine M; Eckermann, Simon; Fogarty, Andrea; Hurley, Diarmuid; Liddle, Sarah K; Lonsdale, Chris; Miller, Andrew; Noetel, Michael; Okely, Anthony D; Sanders, Taren; Telenta, Joanne; Deane, Frank P

2018-03-21

There is a recognised need for targeted community-wide mental health strategies and interventions aimed specifically at prevention and early intervention in promoting mental health. Young males are a high need group who hold particularly negative attitudes towards mental health services, and these views are detrimental for early intervention and help-seeking. Organised sports provide a promising context to deliver community-wide mental health strategies and interventions to adolescent males. The aim of the Ahead of the Game program is to test the effectiveness of a multi-component, community-sport based program targeting prevention, promotion and early intervention for mental health among adolescent males. The Ahead of the Game program will be implemented within a sample drawn from community sporting clubs and evaluated using a sample drawn from a matched control community. Four programs are proposed, including two targeting adolescents, one for parents, and one for sports coaches. One adolescent program aims to increase mental health literacy, intentions to seek and/or provide help for mental health, and to decrease stigmatising attitudes. The second adolescent program aims to increase resilience. The goal of the parent program is to increase parental mental health literacy and confidence to provide help. The coach program is intended to increase coaches' supportive behaviours (e.g., autonomy supportive behaviours), and in turn facilitate high-quality motivation and wellbeing among adolescents. Programs will be complemented by a messaging campaign aimed at adolescents to enhance mental health literacy. The effects of the program on adolescent males' psychological distress and wellbeing will also be explored. Organised sports represent a potentially engaging avenue to promote mental health and prevent the onset of mental health problems among adolescent males. The community-based design, with samples drawn from an intervention and a matched control community, enables evaluation of adolescent males' incremental mental health literacy, help-seeking intentions, stigmatising attitudes, motivation, and resilience impacts from the multi-level, multi-component Ahead of the Game program. Notable risks to the study include self-selection bias, the non-randomised design, and the translational nature of the program. However, strengths include extensive community input, as well as the multi-level and multi-component design. Australian New Zealand Clinical Trials Registry ACTRN12617000709347 . Date registered 17 May 2017. Retrospectively registered.

AGT (Advanced Gas Turbine) technology project

NASA Technical Reports Server (NTRS)

1988-01-01

An overall summary documentation is provided for the Advanced Gas Turbine Technology Project conducted by the Allison Gas Turbine Division of General Motors. This advanced, high risk work was initiated in October 1979 under charter from the U.S. Congress to promote an engine for transportation that would provide an alternate to reciprocating spark ignition (SI) engines for the U.S. automotive industry and simultaneously establish the feasibility of advanced ceramic materials for hot section components to be used in an automotive gas turbine. As this program evolved, dictates of available funding, Government charter, and technical developments caused program emphases to focus on the development and demonstration of the ceramic turbine hot section and away from the development of engine and powertrain technologies and subsequent vehicular demonstrations. Program technical performance concluded in June 1987. The AGT 100 program successfully achieved project objectives with significant technology advances. Specific AGT 100 program achievements are: (1) Ceramic component feasibility for use in gas turbine engines has been demonstrated; (2) A new, 100 hp engine was designed, fabricated, and tested for 572 hour at operating temperatures to 2200 F, uncooled; (3) Statistical design methodology has been applied and correlated to experimental data acquired from over 5500 hour of rig and engine testing; (4) Ceramic component processing capability has progressed from a rudimentary level able to fabricate simple parts to a sophisticated level able to provide complex geometries such as rotors and scrolls; (5) Required improvements for monolithic and composite ceramic gas turbine components to meet automotive reliability, performance, and cost goals have been identified; (6) The combustor design demonstrated lower emissions than 1986 Federal Standards on methanol, JP-5, and diesel fuel. Thus, the potential for meeting emission standards and multifuel capability has been initiated; (7) Small turbine engine aerodynamic and mechanical design capability has been initiated; and (8) An infrastructure of manpower, facilities, materials, and fabrication capabilities has been established which is available for continued development of ceramic component technology in gas turbine and other heat engines.

Directing folding pathways for multi-component DNA origami nanostructures with complex topology

NASA Astrophysics Data System (ADS)

Marras, A. E.; Zhou, L.; Kolliopoulos, V.; Su, H.-J.; Castro, C. E.

2016-05-01

Molecular self-assembly has become a well-established technique to design complex nanostructures and hierarchical mesoscale assemblies. The typical approach is to design binding complementarity into nucleotide or amino acid sequences to achieve the desired final geometry. However, with an increasing interest in dynamic nanodevices, the need to design structures with motion has necessitated the development of multi-component structures. While this has been achieved through hierarchical assembly of similar structural units, here we focus on the assembly of topologically complex structures, specifically with concentric components, where post-folding assembly is not feasible. We exploit the ability to direct folding pathways to program the sequence of assembly and present a novel approach of designing the strand topology of intermediate folding states to program the topology of the final structure, in this case a DNA origami slider structure that functions much like a piston-cylinder assembly in an engine. The ability to program the sequence and control orientation and topology of multi-component DNA origami nanostructures provides a foundation for a new class of structures with internal and external moving parts and complex scaffold topology. Furthermore, this work provides critical insight to guide the design of intermediate states along a DNA origami folding pathway and to further understand the details of DNA origami self-assembly to more broadly control folding states and landscapes.

Stability of large DC power systems using switching converters, with application to the international space station

NASA Technical Reports Server (NTRS)

Manners, B.; Gholdston, E. W.; Karimi, K.; Lee, F. C.; Rajagopalan, J.; Panov, Y.

1996-01-01

As space direct current (dc) power systems continue to grow in size, switching power converters are playing an ever larger role in power conditioning and control. When designing a large dc system using power converters of this type, special attention must be placed on the electrical stability of the system and of the individual loads on the system. In the design of the electric power system (EPS) of the International Space Station (ISS), the National Aeronautics and Space Administration (NASA) and its contractor team led by Boeing Defense & Space Group has placed a great deal of emphasis on designing for system and load stability. To achieve this goal, the team has expended considerable effort deriving a dear concept on defining system stability in both a general sense and specifically with respect to the space station. The ISS power system presents numerous challenges with respect to system stability, such as high power, complex sources and undefined loads. To complicate these issues, source and load components have been designed in parallel by three major subcontractors (Boeing, Rocketdyne, and McDonnell Douglas) with interfaces to both sources and loads being designed in different countries (Russia, Japan, Canada, Europe, etc.). These issues, coupled with the program goal of limiting costs, have proven a significant challenge to the program. As a result, the program has derived an impedance specification approach for system stability. This approach is based on the significant relationship between source and load impedances and the effect of this relationship on system stability. This approach is limited in its applicability by the theoretical and practical limits on component designs as presented by each system segment. As a result, the overall approach to system stability implemented by the ISS program consists of specific hardware requirements coupled with extensive system analysis and hardware testing. Following this approach, the ISS program plans to begin construction of the world's largest orbiting power system in 1997.

Controlled catalytic and thermal sequential pyrolysis and hydrolysis of phenolic resin containing waste streams to sequentially recover monomers and chemicals

DOEpatents

Chum, H.L.; Evans, R.J.

1992-08-04

A process is described for using fast pyrolysis in a carrier gas to convert a waste phenolic resin containing feedstreams in a manner such that pyrolysis of said resins and a given high value monomeric constituent occurs prior to pyrolyses of the resins in other monomeric components therein comprising: selecting a first temperature program range to cause pyrolysis of said resin and a given high value monomeric constituent prior to a temperature range that causes pyrolysis of other monomeric components; selecting, if desired, a catalyst and a support and treating said feedstreams with said catalyst to effect acid or basic catalyzed reaction pathways to maximize yield or enhance separation of said high value monomeric constituent in said first temperature program range to utilize reactive gases such as oxygen and steam in the pyrolysis process to drive the production of specific products; differentially heating said feedstreams at a heat rate within the first temperature program range to provide differential pyrolysis for selective recovery of optimum quantity of said high value monomeric constituent prior to pyrolysis of other monomeric components therein; separating said high value monomeric constituent; selecting a second higher temperature program range to cause pyrolysis of a different high value monomeric constituent of said phenolic resins waste and differentially heating said feedstreams at said higher temperature program range to cause pyrolysis of said different high value monomeric constituent; and separating said different high value monomeric constituent. 11 figs.

Controlled catalytic and thermal sequential pyrolysis and hydrolysis of phenolic resin containing waste streams to sequentially recover monomers and chemicals

DOEpatents

Chum, Helena L.; Evans, Robert J.

1992-01-01

A process of using fast pyrolysis in a carrier gas to convert a waste phenolic resin containing feedstreams in a manner such that pyrolysis of said resins and a given high value monomeric constituent occurs prior to pyrolyses of the resins in other monomeric components therein comprising: selecting a first temperature program range to cause pyrolysis of said resin and a given high value monomeric constituent prior to a temperature range that causes pyrolysis of other monomeric components; selecting, if desired, a catalyst and a support and treating said feedstreams with said catalyst to effect acid or basic catalyzed reaction pathways to maximize yield or enhance separation of said high value monomeric constituent in said first temperature program range to utilize reactive gases such as oxygen and steam in the pyrolysis process to drive the production of specific products; differentially heating said feedstreams at a heat rate within the first temperature program range to provide differential pyrolysis for selective recovery of optimum quantity of said high value monomeric constituent prior to pyrolysis of other monomeric components therein; separating said high value monomeric constituent; selecting a second higher temperature program range to cause pyrolysis of a different high value monomeric constituent of said phenolic resins waste and differentially heating said feedstreams at said higher temperature program range to cause pyrolysis of said different high value monomeric constituent; and separating said different high value monomeric constituent.

Application-Program-Installer Builder

NASA Technical Reports Server (NTRS)

Wolgast, Paul; Demore, Martha; Lowik, Paul

2007-01-01

A computer program builds application programming interfaces (APIs) and related software components for installing and uninstalling application programs in any of a variety of computers and operating systems that support the Java programming language in its binary form. This program is partly similar in function to commercial (e.g., Install-Shield) software. This program is intended to enable satisfaction of a quasi-industry-standard set of requirements for a set of APIs that would enable such installation and uninstallation and that would avoid the pitfalls that are commonly encountered during installation of software. The requirements include the following: 1) Properly detecting prerequisites to an application program before performing the installation; 2) Properly registering component requirements; 3) Correctly measuring the required hard-disk space, including accounting for prerequisite components that have already been installed; and 4) Correctly uninstalling an application program. Correct uninstallation includes (1) detecting whether any component of the program to be removed is required by another program, (2) not removing that component, and (3) deleting references to requirements of the to-be-removed program for components of other programs so that those components can be properly removed at a later time.

Nutrition risk screening: the interrelationship of food insecurity, food intake, and unintentional weight change among homebound elders.

PubMed

Sharkey, Joseph R

2004-01-01

Nutrition risk screening is a key component of the homedelivered meals program. To examine direct and indirect relationships among individual components of nutrition risk, path analysis was conducted on routinely collected data from 908 homebound elders who received home-delivered meals. The good fit of the model revealed that specific nutrition risk factors and indicators of nutritional risk were directly and indirectly associated with meal frequency and unintended weight change. With the heightened vulnerability for poor nutritional health among homebound elders who report food insecurity, policymakers and service providers should strengthen efforts to target individual components of nutrition risk rather than aggregate scores or categorical measures.

Pandemic Influenza Preparedness and Response Among Public-Housing Residents, Single-Parent Families, and Low-Income Populations

PubMed Central

Truman, Benedict I.; Hutchins, Sonja; Richard, Roland; Brown, Clive; Guillory, Joyce A.; Rashid, Jamila

2009-01-01

During the early stages of an influenza pandemic, a pandemic vaccine likely will not be available. Therefore, interventions to mitigate pandemic influenza transmission in communities will be an important component of the response to a pandemic. Public-housing residents, single-parent families, and low-income populations may have difficulty complying with community-wide interventions. To enable compliance with community interventions, stakeholders recommended the following: (1) community mobilization and partnerships, (2) culturally specific emergency communications planning, (3) culturally specific education and training programs, (4) evidence-based measurement and evaluation efforts, (5) strategic planning policies, (6) inclusion of community members as partners, and (7) policy and program changes to minimize morbidity and mortality. PMID:19797740

System cost/performance analysis (study 2.3). Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Kazangey, T.

1973-01-01

The relationships between performance, safety, cost, and schedule parameters were identified and quantified in support of an overall effort to generate program models and methodology that provide insight into a total space vehicle program. A specific space vehicle system, the attitude control system (ACS), was used, and a modeling methodology was selected that develops a consistent set of quantitative relationships among performance, safety, cost, and schedule, based on the characteristics of the components utilized in candidate mechanisms. These descriptive equations were developed for a three-axis, earth-pointing, mass expulsion ACS. A data base describing typical candidate ACS components was implemented, along with a computer program to perform sample calculations. This approach, implemented on a computer, is capable of determining the effect of a change in functional requirements to the ACS mechanization and the resulting cost and schedule. By a simple extension of this modeling methodology to the other systems in a space vehicle, a complete space vehicle model can be developed. Study results and recommendations are presented.

FY16 ASME High Temperature Code Activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swindeman, M. J.; Jetter, R. I.; Sham, T. -L.

2016-09-01

One of the objectives of the ASME high temperature Code activities is to develop and validate both improvements and the basic features of Section III, Division 5, Subsection HB, Subpart B (HBB). The overall scope of this task is to develop a computer program to be used to assess whether or not a specific component under specified loading conditions will satisfy the elevated temperature design requirements for Class A components in Section III, Division 5, Subsection HB, Subpart B (HBB). There are many features and alternative paths of varying complexity in HBB. The initial focus of this task is amore » basic path through the various options for a single reference material, 316H stainless steel. However, the program will be structured for eventual incorporation all the features and permitted materials of HBB. Since this task has recently been initiated, this report focuses on the description of the initial path forward and an overall description of the approach to computer program development.« less

Energy efficient engine component development and integration program

NASA Technical Reports Server (NTRS)

1982-01-01

The objective of the Energy Efficient Engine Component Development and Integration program is to develop, evaluate, and demonstrate the technology for achieving lower installed fuel consumption and lower operating costs in future commercial turbofan engines. Minimum goals have been set for a 12 percent reduction in thrust specific fuel consumption (TSFC), 5 percent reduction in direct operating cost (DOC), and 50 percent reduction in performance degradation for the Energy Efficient Engine (flight propulsion system) relative to the JT9D-7A reference engine. The Energy Efficienct Engine features a twin spool, direct drive, mixed flow exhaust configuration, utilizing an integrated engine nacelle structure. A short, stiff, high rotor and a single stage high pressure turbine are among the major enhancements in providing for both performance retention and major reductions in maintenance and direct operating costs. Improved clearance control in the high pressure compressor and turbines, and advanced single crystal materials in turbine blades and vanes are among the major features providing performance improvement. Highlights of work accomplished and programs modifications and deletions are presented.

Let's Face It: Patient and Parent Perspectives on Incorporating a Facebook Group into a Multidisciplinary Weight Management Program

PubMed Central

Esperanza Menchaca, Alicia D. M.; Sami, Areej; Blake, Natalie

2013-01-01

Abstract Background Social media may have the potential to enhance weight management efforts. However, the acceptability of incorporating this entity into pediatrics is unknown. The objective of this project was to explore patients' and parents' perspectives about developing a Facebook group as a component of a pediatric weight management program. Methods Semistructured interviews were performed between September, 2011, and February, 2012, with patients and parents in a multidisciplinary weight management program. Interviews explored participants' perceptions of potential benefits, concerns, and preferences related to a program-specific Facebook group. Transcripts were reviewed and themes identified. The study concluded when thematic saturation was achieved. Results Participants (n=32) were largely enthusiastic about the idea of a program-specific Facebook group for adolescents. Most preferred a secret group, where only participants would know of the group's existence or group members' identity. No parents expressed concern about security or privacy related to a program-specific Facebook group; one parent expressed concern about undesirable advertisements. Participants endorsed a variety of ideas for inclusion on the page, including weight loss tips, live chats with providers, quizzes, and an incentive system where participants could gain points for making healthy choices. Many parents requested a separate parent-focused page, an idea that was supported by the adolescents. Conclusions This study suggests that participants perceive potential benefits from incorporating social media interventions into pediatric weight management efforts. Privacy and security issues do not appear to be major parental concerns. Future work should explore the impact of program-specific social media interventions on outcomes for patients in weight management programs. PMID:23869854

Three FORTRAN programs for finite-difference solutions to binary diffusion in one and two phases with composition-and time-dependent diffusion coefficients

USGS Publications Warehouse

Sanford, R.F.

1982-01-01

Geological examples of binary diffusion are numerous. They are potential indicators of the duration and rates of geological processes. Analytical solutions to the diffusion equations generally do not allow for variable diffusion coefficients, changing boundary conditions, and impingement of diffusion fields. The three programs presented here are based on Crank-Nicholson finite-difference approximations, which can take into account these complicating factors. Program 1 describes the diffusion of a component into an initially homogeneous phase that has a constant surface composition. Specifically it is written for Fe-Mg exchange in olivine at oxygen fugacities appropriate for the lunar crust, but other components, phases, or fugacities may be substituted by changing the values of the diffusion coefficient. Program 2 simulates the growth of exsolution lamellae. Program 3 describes the growth of reaction rims. These two programs are written for pseudobinary Ca-(Mg, Fe) exchange in pyroxenes. In all three programs, the diffusion coefficients and boundary conditions can be varied systematically with time. To enable users to employ widely different numerical values for diffusion coefficients and diffusion distance, the grid spacing in the space dimension and the increment by which the grid spacing in the time dimension is increased at each time step are input constants that can be varied each time the programs are run to yield a solution of the desired accuracy. ?? 1982.

The Business Case for Spiral Development in Heavy Lift Launch Vehicle Systems

NASA Technical Reports Server (NTRS)

Farr, Rebecca A.; Christensen, David L.; Keith, Edward L.

2005-01-01

Performance capabilities of a specific combination of the Space Shuttle external tank and various liquid engines in an in-line configuration, two-stage core vehicle with multiple redesigned solid rocket motor strap-ons are reexamined. This concept proposes using existing assets, hardware, and capabilities that are already crew-rated, flight certified, being manufactured under existing contracts, have a long history of component and system ground testing, and have been flown for over 20 yr. This paper goes beyond describing potential performance capabilities of specific components to discuss the overall system feasibility-from end to end, start to finish-describing the inherent cost advantages of the Spiral Development concept, which builds on existing capabilities and assets, as opposed to starting up a "fresh sheet" heavy-lift launch vehicle program from scratch.

Dedication file preparation for commercial-grade electric components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hendricks, J.R.; Farwell, C.R. Jr.

1988-01-01

Dedication is the process of making a commercial-grade item into a basic component that can be installed in safety systems. This process ensures that the commercially manufactured items are of the same or equivalent form, fit, function, and materials as the originally provided safety item. This process must ensure that the original utility's equipment qualification program is maintained per licensing commitments to 10CFR50.49 and general design criterion No. 4. Today, utilities recognize the need for establishing a dedication program to provide the flexibility in obtaining replacement items directly from the original manufacturers. This need has arisen because (a) most systemmore » houses, large manufacturers, and component manufacturers will sell their products only through distributors as straight commercial-grade items or only service former clients, and (b) lack of competition for specific safety-related items has resulted in excessive hardware cost and very long delivery schedules, which could affect plant availability. The vehicle for utilities to obtain safety-related items is to establish and manage a comprehensive dedication program for their own use or provide the direction for a nuclear supplier to follow. This paper provides both utilities and nuclear suppliers insight into the complexities of a dedication program. This insight is provided from our experience as a utilities agent and as a third-party nuclear supplier.« less

Oak Ridge Environmental Information System (ORIES) site workstation information packet for OREIS V1. 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Voorhees, L.D.; McCord, R.A.; Durfee, R.C.

1993-02-01

The OREIS site workstation information packet was developed to accompany the OREIS site workstations, which are being delivered to the Environmental Restoration programs at the five DOE-OR sites. The packet is written specifically for the Site ER program staff at each of the five Sites who have been designated the OREIS contact by their ER program manager, and is not intended for general distribution. The packet provides an overview of the components of OREIS, points to more detailed information provided in the accompanying vendor and OREIS developed manuals, and includes information on training opportunities and user support.

The Influence of Short-Term Scoliosis-Specific Exercise Rehabilitation on Pulmonary Function in Patients with AIS.

PubMed

Moramarco, Marc; Fadzan, Maja; Moramarco, Kathryn; Heller, Amy; Righter, Sonia

2016-01-01

To investigate the short-term outcomes of treatment utilizing an outpatient scoliosis- specific back school program in thirty-six patients with adolescent idiopathic scoliosis (AIS). Improved signs and symptoms of AIS have been reported in response to curve-patternspecific exercise therapy programs. Additional outcome studies are needed. Thirty-six patients with adolescent idiopathic scoliosis (AIS), 33 females and 3 males, completed a twenty-hour multimodal exercise program (Schroth Best Practice® - SBP) for five to seven days at Scoliosis 3DC(SM). Average age was 13.89 years and average Cobb angles were 36.92° thoracic and 33.92° lumbar. The sample was comprised of patients under treatment from August 2011 to February 2015 who never had scoliosis-related surgery and who were not undergoing brace treatment. SBP program components included physio-logic® exercises, mobilizations, activities of daily living (ADLs), 3-D Made Easy®, and Schroth exercises. Forced vital capacity (FVC), forced expiratory volume in one second (FEV1), chest expansion (CE), and angle of trunk rotation (ATR) were clinical parameters used to evaluate results of this outpatient scoliosis-specific exercise program. Highly significant improvements were noted in FVC, FEV1, CE and Scoliometer(TM) readings. A short-term outpatient SBP program was found to have a positive influence on FVC, FEV1, ATR, and CE. We will present long-term results in a subsequent study.

The Importance of Interaction in Web-Based Education: A Program-Level Case Study of Online MBA Courses

ERIC Educational Resources Information Center

Su, Bude; Bonk, Curtis J.; Magjuka, Richard J.; Liu, Xiaojing; Lee, Seung-hee

2005-01-01

Though interaction is often billed as a significant component of successful online learning, empirical evidence of its importance as well as practical guidance or specific interaction techniques continue to be lacking. In response, this study utilizes both quantitative and qualitative data to investigate how instructors and students perceive the…

Job and Task Analysis in the Evaluation of Vocational Education Programs. Special Interest Paper No. 19.

ERIC Educational Resources Information Center

Abramson, Theodore

Vocational education is a major component of our educational systems at the secondary and postsecondary school level. The passage of the Vocational Education Act of 1963 broadened the definition of vocational education from training people for specific occupations to developing human potential and long-term employability. However, due to the…

Introduction to session on materials and structures

NASA Technical Reports Server (NTRS)

Vosteen, L. F.

1978-01-01

A review was given of the development of composites for aircraft. Supporting base technology and the Aircraft Energy Efficiency Composites Program are included. Specific topics discussed include: (1) environmental effects on materials; (2) material quality and chemical characterization; (3) design and analysis methods; (4) structural durability; (5) impact sensitivity; (6) carbon fiber electrical effects; and (7) composite components.

76 FR 15826 - Fisheries of the Exclusive Economic Zone Off Alaska; Gulf of Alaska License Limitation Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-22

... or non-trawl gear designations); and (4) designate the type of vessel operation permitted (i.e., LLP... catcher/processor). The endorsements for specific regulatory areas, gear designations, and vessel operational types are non-severable from the LLP license (i.e., once an LLP license is issued, the components...

Exploring the Information Literacy Needs and Values of High School Chemistry Teachers

ERIC Educational Resources Information Center

Zane, Marci; Tucci, Valerie Karvey

2016-01-01

To meet the information literacy (IL) needs of chemistry students, The College of New Jersey's (TCNJ) Library and Chemistry Departments have created a three-year seminar with a strong IL component. The program focuses on IL skills necessary for success in industry and graduate or professional education, but may lack features specific to those…

Using Literacy Booster Groups To Maintain and Extend Reading Recovery Success in the Primary Grades.

ERIC Educational Resources Information Center

MacKenzie, Karla K.

2001-01-01

Describes a comprehensive school literacy program for primary students and looks specifically at one component, Literacy Booster Groups. Notes that in Booster Groups, former Reading Recovery students receive extra support to maintain and extend literacy progress. Concludes that students who were once functioning at the bottom of their class are…

Heat-Energy Analysis for Solar Receivers

NASA Technical Reports Server (NTRS)

Lansing, F. L.

1982-01-01

Heat-energy analysis program (HEAP) solves general heat-transfer problems, with some specific features that are "custom made" for analyzing solar receivers. Can be utilized not only to predict receiver performance under varying solar flux, ambient temperature and local heat-transfer rates but also to detect locations of hotspots and metallurgical difficulties and to predict performance sensitivity of neighboring component parameters.

Assessment in Gifted Education: A Review of the Literature from 2005 to 2016

ERIC Educational Resources Information Center

Cao, Thuy Hong; Jung, Jae Yup; Lee, Jihyun

2017-01-01

Assessment is a crucial component of gifted education. Not only does it facilitate the recognition of the potential and specific needs of gifted students, it also monitors the progress and growth of gifted students, and allows for the evaluation of gifted education programs. In the present review, we synthesize the literature on assessment in…

Bridging the Great Divide: Connecting Alaska Native Learners and Leaders via "High Touch-High Tech" Distance Learning.

ERIC Educational Resources Information Center

Berkshire, Steven; Smith, Gary

The Rural Alaska Native Adult program of Alaska Pacific University is specifically designed for adult Native learners. Courses in business administration, human services, and teacher education are offered to rural Native adult students via an interactive Internet-based format after an initial 1-week residency. The Internet component is facilitated…

HIV Prevention and Rehabilitation Models for Women Who Inject Drugs in Russia and Ukraine

PubMed Central

Skipalska, Halyna; Suvorova, Svetlana; Sukovatova, Olga; Zakharov, Konstantin; Hodgdon, Sara

2012-01-01

Women who inject drugs require gender-specific approaches to drug rehabilitation, modification of risk behaviors, and psychosocial adaptation. Improved outcomes have been demonstrated when the specific needs of women's subpopulations have been addressed. Special services for women include prenatal care, child care, women-only programs, supplemental workshops on women-focused topics, mental health services, and comprehensive programs that include several of the above components. To address the special needs of women injecting drug user (IDU) subpopulations, such as HIV-positive pregnant women and women with young children, recently released female prisoners, and street-involved girls and young women, HealthRight International and its local partners in Russia and Ukraine have developed innovative service models. This paper presents each of these models and discusses their effectiveness and implementation challenges specific to local contexts in Russia and Ukraine. PMID:23304535

Alternative aircraft fuels technology

NASA Technical Reports Server (NTRS)

Grobman, J.

1976-01-01

NASA is studying the characteristics of future aircraft fuels produced from either petroleum or nonpetroleum sources such as oil shale or coal. These future hydrocarbon based fuels may have chemical and physical properties that are different from present aviation turbine fuels. This research is aimed at determining what those characteristics may be, how present aircraft and engine components and materials would be affected by fuel specification changes, and what changes in both aircraft and engine design would be required to utilize these future fuels without sacrificing performance, reliability, or safety. This fuels technology program was organized to include both in-house and contract research on the synthesis and characterization of fuels, component evaluations of combustors, turbines, and fuel systems, and, eventually, full-scale engine demonstrations. A review of the various elements of the program and significant results obtained so far are presented.

Airframe Noise Sub-Component Definition and Model

NASA Technical Reports Server (NTRS)

Golub, Robert A. (Technical Monitor); Sen, Rahul; Hardy, Bruce; Yamamoto, Kingo; Guo, Yue-Ping; Miller, Gregory

2004-01-01

Both in-house, and jointly with NASA under the Advanced Subsonic Transport (AST) program, Boeing Commerical Aircraft Company (BCA) had begun work on systematically identifying specific components of noise responsible for total airframe noise generation and applying the knowledge gained towards the creation of a model for airframe noise prediction. This report documents the continuation of the collection of database from model-scale and full-scale airframe noise measurements to compliment the earlier existing databases, the development of the subcomponent models and the generation of a new empirical prediction code. The airframe subcomponent data includes measurements from aircraft ranging in size from a Boeing 737 to aircraft larger than a Boeing 747 aircraft. These results provide the continuity to evaluate the technology developed under the AST program consistent with the guidelines set forth in NASA CR-198298.

Mediating Effects of Working Memory in the Relation Between Rapid Automatized Naming and Chinese Reading Comprehension.

PubMed

Weng, Xiaoqian; Li, Guangze; Li, Rongbao

2016-08-01

This study examined the mediating role of working memory (WM) in the relation between rapid automatized naming (RAN) and Chinese reading comprehension. Three tasks assessing differentially visual and verbal components of WM were programmed by E-prime 2.0. Data collected from 55 Chinese college students were analyzed using correlations and hierarchical regression methods to determine the connection among RAN, reading comprehension, and WM components. Results showed that WM played a significant mediating role in the RAN-reading relation and that auditory WM made stronger contributions than visual WM. Taking into account of the multi-component nature of WM and the specificity of Chinese reading processing, this study discussed the mediating powers of the WM components, particularly auditory WM, further clarifying the possible components involved in the RAN-reading relation and thus providing some insight into the complicated Chinese reading process.

Data systems elements technology assessment and system specifications, issue no. 2. [nasa programs

NASA Technical Reports Server (NTRS)

1978-01-01

The ability to satisfy the objectives of future NASA Office of Applications programs is dependent on technology advances in a number of areas of data systems. The hardware and software technology of end-to-end systems (data processing elements through ground processing, dissemination, and presentation) are examined in terms of state of the art, trends, and projected developments in the 1980 to 1985 timeframe. Capability is considered in terms of elements that are either commercially available or that can be implemented from commercially available components with minimal development.

Space station integrated propulsion and fluid system study: Fluid systems configuration databook

NASA Technical Reports Server (NTRS)

Rose, L.; Bicknell, B.; Bergman, D.; Wilson, S.

1987-01-01

This databook contains fluid system requirements and system descriptions for Space Station program elements including the United States and International modules, integrated fluid systems, attached payloads, fluid servicers and vehicle accommodation facilities. Separate sections are devoted to each of the program elements and include a discussion of the overall system requirements, specific fluid systems requirements and systems descriptions. The systems descriptions contain configurations, fluid inventory data and component lists. In addition, a list of information sources is referenced at the end of each section.

Design of an optical PPM communication link in the presence of component tolerances

NASA Technical Reports Server (NTRS)

Chen, C.-C.

1988-01-01

A systematic approach is described for estimating the performance of an optical direct detection pulse position modulation (PPM) communication link in the presence of parameter tolerances. This approach was incorporated into the JPL optical link analysis program to provide a useful tool for optical link design. Given a set of system parameters and their tolerance specifications, the program will calculate the nominal performance margin and its standard deviation. Through use of these values, the optical link can be designed to perform adequately even under adverse operating conditions.

Performance Characteristics of Lithium-Ion Prototype Batteries for Mars Surveyor Program 2001 Lander

NASA Technical Reports Server (NTRS)

Smart, M. C.; Ratnakumar, B. V.; Whitcanack, L.; Surampudi, S.; Byers, J.; Marsh, R. A.

2000-01-01

A viewgraph presentation outlines the scientific payload, expected launch date and tasks, and an image of the Mars Surveyor 2001 Lander components. The Lander's battery specifications are given. The program objectives for the Li-ion cells for the Lander are listed, and results performance evaluation and cycle life performance tests are outlined for different temperatures. Cell charge characteristics are described, and test data is presented for charge capacity at varying temperatures. Capacity retention and storage characteristics tests are described and results are shown.

Evaluation of AHRQ's on-time pressure ulcer prevention program: a facilitator-assisted clinical decision support intervention for nursing homes.

PubMed

Olsho, Lauren E W; Spector, William D; Williams, Christianna S; Rhodes, William; Fink, Rebecca V; Limcangco, Rhona; Hurd, Donna

2014-03-01

Pressure ulcers present serious health and economic consequences for nursing home residents. The Agency for Healthcare Research & Quality, in partnership with the New York State Department of Health, implemented the pressure ulcer module of On-Time Quality Improvement for Long Term Care (On-Time), a clinical decision support intervention to reduce pressure ulcer incidence rates. To evaluate the effectiveness of the On-Time program in reducing the rate of in-house-acquired pressure ulcers among nursing home residents. We employed an interrupted time-series design to identify impacts of 4 core On-Time program components on resident pressure ulcer incidence in 12 New York State nursing homes implementing the intervention (n=3463 residents). The sample was purposively selected to include nursing homes with high baseline prevalence and incidence of pressure ulcers and high motivation to reduce pressure ulcers. Differential timing and sequencing of 4 core On-Time components across intervention nursing homes and units enabled estimation of separate impacts for each component. Inclusion of a nonequivalent comparison group of 13 nursing homes not implementing On-Time (n=2698 residents) accounts for potential mean-reversion bias. Impacts were estimated via a random-effects Poisson model including resident-level and facility-level covariates. We find a large and statistically significant reduction in pressure ulcer incidence associated with the joint implementation of 4 core On-Time components (incidence rate ratio=0.409; P=0.035). Impacts vary with implementation of specific component combinations. On-Time implementation is associated with sizable reductions in pressure ulcer incidence.

Patient safety training in pediatric emergency medicine: a national survey of program directors.

PubMed

Wolff, Margaret; Macias, Charles G; Garcia, Estevan; Stankovic, Curt

2014-07-01

The Accreditation Council for Graduate Medical Education requires training in patient safety and medical errors but does not provide specification for content or methods. Pediatric emergency medicine (EM) fellowship directors were surveyed to characterize current training of pediatric EM fellows in patient safety and to determine the need for additional training. From June 2013 to August 2013, pediatric EM fellowship directors were surveyed via e-mail. Of the 71 eligible survey respondents, 57 (80.3%) completed surveys. A formal curriculum was present in 24.6% of programs, with a median of 6 hours (range = 1 to 18 hours) dedicated to the curriculum. One program evaluated the efficacy of the curriculum. Nearly 91% of respondents without formal programs identified lack of local faculty expertise or interest as the primary barrier to implementing patient safety curricula. Of programs without formal curricula, 93.6% included at least one component of patient safety training in their fellowship programs. The majority of respondents would implement a standardized patient safety curriculum for pediatric EM if one was available. Despite the importance of patient safety training and requirements to train pediatric EM fellows in patient safety and medical errors, there is a lack of formal curriculum and local faculty expertise. The majority of programs have introduced components of patient safety training and desire a standardized curriculum. © 2014 by the Society for Academic Emergency Medicine.

Retaining minorities in engineering: Assessment of a program prototype

NASA Astrophysics Data System (ADS)

Good, Jennifer Marie (Phillips)

Program assessment is an essential part of healthy program development. Assessment should include multiple considerations, dimensions, and outcomes that match the program's objectives. As a newly formed retention program, the Auburn University Minority Engineering Program, designed to help pre-engineering minority students make the transition into their freshman year of university studies, incorporated evaluation and assessment into all three components of the program (the interactive learning laboratory, critical-thinking workshops, and Sunday-evening tutorials) from the program's inception. If students successfully adapted to the university environment and the demands of the pre-engineering course of study, then retention of minority students in the College of Engineering should improve. Data were gathered on the students involved in the various program components. Students who entered the Minority Engineering Program were pre- and posttested on three standardized subtests (critical thinking, mathematics, and science reasoning) of the Collegiate Assessment of Academic Proficiency. The first-quarter grade-point averages of the students were also gathered to compare their grades to freshman students in previous quarters within the College of Engineering. Qualitative data were also gathered on this same group of students. An analysis of the data revealed that student achievement is affected by involvement in the Minority Engineering Program. Specifically, the first quarter grade point averages of students involved in the program exceeded those of their peers in earlier years of study prior to the program's existence. In addition, mathematics and science reasoning scores on standardized tests increased pre- to postintervention. Comments collected in journals and files also demonstrated use of critical-thinking and problem-solving skills employed by the students. Recommendations for alterations of the program were made based on the outcome of the program evaluation. Further suggestions for research in minority engineering program development and evaluation were also discussed.

Approaches to ensuring and improving quality in the context of health system strengthening: a cross-site analysis of the five African Health Initiative Partnership programs

PubMed Central

2013-01-01

Background Integrated into the work in health systems strengthening (HSS) is a growing focus on the importance of ensuring quality of the services delivered and systems which support them. Understanding how to define and measure quality in the different key World Health Organization building blocks is critical to providing the information needed to address gaps and identify models for replication. Description of approaches We describe the approaches to defining and improving quality across the five country programs funded through the Doris Duke Charitable Foundation African Health Initiative. While each program has independently developed and implemented country-specific approaches to strengthening health systems, they all included quality of services and systems as a core principle. We describe the differences and similarities across the programs in defining and improving quality as an embedded process essential for HSS to achieve the goal of improved population health. The programs measured quality across most or all of the six WHO building blocks, with specific areas of overlap in improving quality falling into four main categories: 1) defining and measuring quality; 2) ensuring data quality, and building capacity for data use for decision making and response to quality measurements; 3) strengthened supportive supervision and/or mentoring; and 4) operational research to understand the factors associated with observed variation in quality. Conclusions Learning the value and challenges of these approaches to measuring and improving quality across the key components of HSS as the projects continue their work will help inform similar efforts both now and in the future to ensure quality across the critical components of a health system and the impact on population health. PMID:23819662

Applying the health promotion model to development of a worksite intervention.

PubMed

Lusk, S L; Kerr, M J; Ronis, D L; Eakin, B L

1999-01-01

Consistent use of hearing protection devices (HPDs) decreases noise-induced hearing loss, however, many workers do not use them consistently. Past research has supported the need to use a conceptual framework to understand behaviors and guide intervention programs; however, few reports have specified a process to translate a conceptual model into an intervention. The strongest predictors from the Health Promotion Model were used to design a training program to increase HPD use among construction workers. Carpenters (n = 118), operating engineers (n = 109), and plumber/pipefitters (n = 129) in the Midwest were recruited to participate in the study. Written questionnaires including scales measuring the components of the Health Promotion Model were completed in classroom settings at worker trade group meetings. All items from scales predicting HPD use were reviewed to determine the basis for the content of a program to promote the use of HPDs. Three selection criteria were developed: (1) correlation with use of hearing protection (at least .20), (2) amenability to change, and (3) room for improvement (mean score not at ceiling). Linear regression and Pearson's correlation were used to assess the components of the model as predictors of HPD use. Five predictors had statistically significant regression coefficients: perceived noise exposure, self-efficacy, value of use, barriers to use, and modeling of use of hearing protection. Using items meeting the selection criteria, a 20-minute videotape with written handouts was developed as the core of an intervention. A clearly defined practice session was also incorporated in the training intervention. Determining salient factors for worker populations and specific protective equipment prior to designing an intervention is essential. These predictors provided the basis for a training program that addressed the specific needs of construction workers. Results of tests of the effectiveness of the program will be available in the near future.

Develop a Model Component

NASA Technical Reports Server (NTRS)

Ensey, Tyler S.

2013-01-01

During my internship at NASA, I was a model developer for Ground Support Equipment (GSE). The purpose of a model developer is to develop and unit test model component libraries (fluid, electrical, gas, etc.). The models are designed to simulate software for GSE (Ground Special Power, Crew Access Arm, Cryo, Fire and Leak Detection System, Environmental Control System (ECS), etc. .) before they are implemented into hardware. These models support verifying local control and remote software for End-Item Software Under Test (SUT). The model simulates the physical behavior (function, state, limits and 110) of each end-item and it's dependencies as defined in the Subsystem Interface Table, Software Requirements & Design Specification (SRDS), Ground Integrated Schematic (GIS), and System Mechanical Schematic.(SMS). The software of each specific model component is simulated through MATLAB's Simulink program. The intensiv model development life cycle is a.s follows: Identify source documents; identify model scope; update schedule; preliminary design review; develop model requirements; update model.. scope; update schedule; detailed design review; create/modify library component; implement library components reference; implement subsystem components; develop a test script; run the test script; develop users guide; send model out for peer review; the model is sent out for verifictionlvalidation; if there is empirical data, a validation data package is generated; if there is not empirical data, a verification package is generated; the test results are then reviewed; and finally, the user. requests accreditation, and a statement of accreditation is prepared. Once each component model is reviewed and approved, they are intertwined together into one integrated model. This integrated model is then tested itself, through a test script and autotest, so that it can be concluded that all models work conjointly, for a single purpose. The component I was assigned, specifically, was a fluid component, a discrete pressure switch. The switch takes a fluid pressure input, and if the pressure is greater than a designated cutoff pressure, the switch would stop fluid flow.

Chemical characterization of some aerobic liquids in CELSS

NASA Technical Reports Server (NTRS)

Madsen, Brooks C.

1993-01-01

Untreated aqueous soybean and wheat leachate and aerobically treated wheat leachate prepared from crop residues that are produced as a component of the Controlled Ecological Life Support System program designed to support long duration space missions were compared, and a general chemical characterization was accomplished. Solid phase extraction and high performance liquid chromatography were used to accomplish comparisons based on chromatographic and ultraviolet absorption properties of the components that are present. Specific compounds were not identified; however, general composition related to the initial presence of phenol-like compounds and their disappearance during aerobic treatment was explored.

Process Evaluation of a Workers' Health Surveillance Program for Meat Processing Workers.

PubMed

van Holland, Berry J; Brouwer, Sandra; de Boer, Michiel R; Reneman, Michiel F; Soer, Remko

2017-09-01

Objective To evaluate the implementation process of a workers' health surveillance (WHS) program in a Dutch meat processing company. Methods Workers from five plants were eligible to participate in the WHS program. The program consisted of four evaluative components and an intervention component. Qualitative and quantitative methods were used to evaluate seven process aspects. Data were gathered by interviews with stakeholders, participant questionnaires, and from registries of the company and occupational health service. Results Two recruitment strategies were used: open invitation or automatic participation. Of the 986 eligible workers, 305 participated in the program. Average reach was 53 %. Two out of five program components could not be assessed on dose delivered, dose received and fidelity. If components were assessable, 85-100 % of the components was delivered, 66-100 % of the components was received by participants, and fidelity was 100 %. Participants were satisfied with the WHS program (mean score 7.6). Contextual factors that facilitated implementation were among others societal developments and management support. Factors that formed barriers were program novelty and delayed follow-up. Conclusion The WHS program was well received by participants. Not all participants were offered the same number of program components, and not all components were performed according to protocol. Deviation from protocol is an indication of program failure and may affect program effectiveness.

Formative Assessment as a Tool to Benefit the Student/Mentor Relationship in the Northern Ecosystem Research for Undergraduates (NERU) Project

NASA Astrophysics Data System (ADS)

Froburg, E.; Varner, R. K.

2016-12-01

Partners in the Northern Ecosystem Research for Undergraduates (NERU) project, funded by the NSF Research Experience for Undergraduates (REU) program, have developed a multi-instrument formative assessment approach aimed at maintaining a responsive relationship between undergraduate participants and their research mentors. All evaluation is conducted independent of the NERU scientific/mentor team, by the Joan and James Leitzel Center for Mathematics, Science, and Engineering Education. The 10-week summer research experience has 3 components. 1) REU fellows spend the first 3-weeks at the University of New Hampshire, where they acquire background knowledge of Earth System Science and biogeochemistry; 2) students spend the following 4-weeks at the Abisko Scientific Research Station in research co-mentored by UNH-based and ANS-based scientists; and 3) fellows return to UNH to complete any additional analytical work, synthesize their results, and prepare their projects for presentation. There are three primary tools that are used formatively, and the results are integrated over multiple time periods. Application and Pre-program Survey: Although these two instruments are primarily components of participant recruitment and the summative program metrics, they also provide a baseline understanding of student preparation and perspectives. Mentor Pairing Survey: This component was added prior to the fourth year of the program, in response to specific trends in participant feedback. The survey is completed by both participants and mentors, and is designed to match research goals, skills, and personalities. Focus Groups: Two focus group sessions are held during the summer research experience—one midway through the 3rd week, just prior to departure for Sweden, and a second session just prior to completion of the 10-week summer program. These focus groups provide immediate feedback on, and opportunity for response to, student concerns in a range of areas. Participants are also encouraged to approach the evaluator individually. Taken as a whole, formative assessment allows the project team to respond immediately to specific participant concerns, and to also make longer-term programmatic changes reflective of trends in survey and focus group responses.

Impact of the Urban Reproductive Health Initiative on family planning uptake at facilities in Kenya, Nigeria, and Senegal.

PubMed

Winston, Jennifer; Calhoun, Lisa M; Corroon, Meghan; Guilkey, David; Speizer, Ilene

2018-01-05

The 2012 London Summit on Family Planning set ambitious goals to enable 120 million more women and adolescent girls to use modern contraceptives by 2020. The Urban Reproductive Health Initiative (URHI) was a Bill & Melinda Gates Foundation funded program designed to help contribute to these goals in urban areas in India, Kenya, Nigeria, and Senegal. URHI implemented a range of country-specific demand and supply side interventions, with supply interventions generally focused on improved service quality, provider training, outreach to patients, and commodity stock management. This study uses data collected by the Measurement, Learning & Evaluation (MLE) Project to examine the effectiveness of these supply-side interventions by considering URHI's influence on the number of family planning clients at health facilities over a four-year period in Kenya, Nigeria, and Senegal. The analysis used facility audits and provider surveys. Principal-components analysis was used to create country-specific program exposure variables for health facilities. Fixed-effects regression was used to determine whether family planning uptake increased at facilities with higher exposure. Outcomes of interest were the number of new family planning acceptors and the total number of family planning clients per reproductive health care provider in the last year. Higher program component scores were associated with an increase in new family planning acceptors per provider in Kenya (β = 18, 95% CI = 7-29), Nigeria (β = 14, 95% CI = 8-20), and Senegal (β = 7, 95% CI = 3-12). Higher scores were also associated with more family planning clients per provider in Kenya (β = 31, 95% CI = 7-56) and Nigeria (β = 26, 95% CI = 15-38), but not in Senegal. Supply-side interventions have increased the number of new family planning acceptors at facilities in urban Nigeria, Kenya, and Senegal and the overall number of clients in urban Nigeria and Kenya. While tailoring to the local environment, programs seeking to increase family planning use should include components to improve availability and quality of family planning services, which are part of a rights-based approach to family planning programming.

Using theory to develop an exercise intervention for patients post stroke.

PubMed

Shaughnessy, Marianne; Resnick, Barbara M

2009-01-01

Stroke remains a leading cause of disability for older adults. While is it well established in the literature that exercise programs can have significant benefit, many stroke survivors do not receive specific recommendations for exercise or lack the motivation to continue exercising following discharge from rehabilitation. This article describes an exercise intervention developed for subacute stroke survivors that utilizes the self-efficacy theory framework. The rationale for selection of this theoretical framework and specific examples of interventions linked to components of the model are provided. The article describes the motivational/educational program and the sequential follow-up designed to prepare stroke survivors to increase exercise behavior. Theoretical frameworks are useful tools for guiding and organizing research investigations from literature review through development and implementation of the intervention to interpretation of findings.

3-dimensional beam scanning system for particle radiation therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leemann, C.; Alonso, J.; Grunder, H.

1977-03-01

In radiation therapy treatment volumes up to several liters have to be irradiated. Today's charged particle programs use ridge filters, scattering foils, occluding rings collimators and boluses to shape the dose distribution. An alternative approach, scanning of a small diameter beam, is analyzed and tentative systems specifications are derived. Critical components are scheduled for fabrication and testing at LBL.

National trends in ozone injury to forest plants: 16 years of biomonitoring

Treesearch

Gretchen Smith

2013-01-01

The ozone indicator, an important research component of the Forest Health Monitoring (FHM) Program of the Forest Service, U.S. Department of Agriculture, was developed and implemented to address specific concerns about the negative effects of ground-level ozone pollution on forest health and productivity. Ozone is a highly toxic air contaminant that has been shown...

Mountain-Plains Handbook: The Design and Operation of a Residential Family Based Education Program. Appendix. Supplement II to Volume 5. Operational Support: Administrative Services Division.

ERIC Educational Resources Information Center

Anderson, Newell B.; And Others

One of two supplements which accompany chapter 5 of "Mountain-Plains Handbook: The Design and Operation of a Residential, Family Oriented Career Education Model" (CE 014 630), this document contains specific information concerning the following components of the administrative services division: purchasing, property control, and…

Correlated Attack Modeling (CAM)

DTIC Science & Technology

2003-10-01

describing attack models to a scenario recognition engine, a prototype of such an engine was developed, using components of the EMERALD intrusion...content. Results – The attacker gains information enabling remote access to database (i.e., privileged login information, database layout to allow...engine that uses attack specifications written in CAML. The implementation integrates two advanced technologies devel- oped in the EMERALD program [27, 31

Multistate comparison of attractants and the impact of fruit development stage on trapping Drosophila suzukii (Diptera: Drosophilidae) in raspberry and blueberry

USDA-ARS?s Scientific Manuscript database

Spotted wing drosophila, Drosophila suzukii, is an invasive pest of maturing and ripe soft-skinned fruits in the United States. D. suzukii monitoring is a necessary component of an effective integrated pest management program, but require a lure that is highly attractive and as specific to D. suzuki...

Mountain-Plains Handbook: The Design and Operation of a Residential Family Based Education Program. Appendix. Supplement I to Volume 5. Operational Support: Administrative Services Division.

ERIC Educational Resources Information Center

Anderson, Newell B.; And Others

One of two supplements which accompany chapter 5 of "Mountain-Plains Handbook: The Design and Operation of a Residential, Family Oriented Career Education Model" (CE 014 630), this document contains specific information concerning the reprographic and personnel components of the administrative services division. Several job descriptions…

In Defense of the Practical: An Evaluation of Effects and Relationships in One Component of a Teacher Education Program.

ERIC Educational Resources Information Center

Mills, Patricia

This study is based on the evaluation of the Methods Experience Project (MEP) in the College of Education at Bowling Green State University, Bowling Green, Ohio. Specifically, the study identifies and describes the nature and direction of possible changes in selected preservice teacher behavior which occurred during the project and explores the…

Sonar Transducer Reliability Improvement Program (STRIP).

DTIC Science & Technology

1981-04-01

CERAMICS. ... .......................... 31 10. STANDARDIZED TEST PROCEDURE ........ .................... ... 35 11. ACCELERATED LIFE TEST...components, and piece-parts that will meet specified requirements in the operational environment during the entire useful life of the transducer. Standards...C.I. Bohmaun F-3 Reliability & Life Prediction TRI R.I. Smith Specification ,F-4 TR-122 FM4 & Improvements NRL-USRD R.W. Timm 1-5 Metal Matrix

Department of Defense Strategic Sustainability Performance Plan, FY 2011

DTIC Science & Technology

2011-01-01

particularly in Asia— places pressure on projected oil production and refining capacity . Relating specifically to the fixed installations under the...ensure that sustainability factors are adequately addressed. Departmental planning and programming guidance lays out requirements that DoD Components... factors in addition to mission, financial, and regulatory considerations. For example, the mission benefits of having an off-grid source of electricity

Incremental Progress: Re-Examining Field Experiences in K-12 Online Learning Contexts in the United States

ERIC Educational Resources Information Center

Archambault, Leanna; Kennedy, Kathryn; Shelton, Catharyn; Dalal, Medha; McAllister, Laura; Huyett, Sabrina

2016-01-01

Despite the call for a transformation of teacher education in the 21st century, surprisingly little has changed. This includes how the practical, hands-on component, known as a field experience is structured. Previous research, conducted in 2010, specifically examining how teacher education programs address K-12 online learning through their field…

Health effects of carbon-containing particulate matter: focus on sources and recent research program results.

PubMed

Rohr, Annette; McDonald, Jacob

2016-02-01

Air pollution is a complex mixture of gas-, vapor-, and particulate-phase materials comprised of inorganic and organic species. Many of these components have been associated with adverse health effects in epidemiological and toxicological studies, including a broad spectrum of carbonaceous atmospheric components. This paper reviews recent literature on the health impacts of organic aerosols, with a focus on specific sources of organic material; it is not intended to be a comprehensive review of all the available literature. Specific emission sources reviewed include engine emissions, wood/biomass combustion emissions, biogenic emissions and secondary organic aerosol (SOA), resuspended road dust, tire and brake wear, and cooking emissions. In addition, recent findings from large toxicological and epidemiological research programs are reviewed in the context of organic PM, including SPHERES, NPACT, NERC, ACES, and TERESA. A review of the extant literature suggests that there are clear health impacts from emissions containing carbon-containing PM, but difficulty remains in apportioning responses to certain groupings of carbonaceous materials, such as organic and elemental carbon, condensed and gas phases, and primary and secondary material. More focused epidemiological and toxicological studies, including increased characterization of organic materials, would increase understanding of this issue.

Self-Efficacy and Social Support as Mediators Between Culturally Specific Dance and Lifestyle Physical Activity

PubMed Central

Murrock, Carolyn J.; Madigan, Elizabeth

2013-01-01

Culturally specific dance has the potential to generate health benefits but is seldom used even among studies advocating culturally specific interventions. This study examined the components of self-efficacy and social support as mediators between culturally specific dance and lifestyle physical activity in African American women (N = 126). An experimental design compared intervention and control groups for mediating effects of self-efficacy and social support on lifestyle physical activity. Findings indicated that only outcome expectations and social support from friends mediated effects. Culturally specific dance is a first step in encouraging African American women to become more physically active and improve health outcomes. The implications are that culturally specific dance programs can improve health outcomes by including members of underserved populations. PMID:18763475

Self-efficacy and social support as mediators between culturally specific dance and lifestyle physical activity.

PubMed

Murrock, Carolyn J; Madigan, Elizabeth

2008-01-01

Culturally specific dance has the potential to generate health benefits but is seldom used even among studies advocating culturally specific interventions. This study examined the components of self-efficacy and social support as mediators between culturally specific dance and lifestyle physical activity in African American women (N = 126). An experimental design compared intervention and control groups for mediating effects of self-efficacy and social support on lifestyle physical activity. Findings indicated that only outcome expectations and social support from friends mediated effects. Culturally specific dance is a first step in encouraging African American women to become more physically active and improve health outcomes. The implications are that culturally specific dance programs can improve health outcomes by including members of underserved populations.

External quality-assurance programs managed by the U.S. Geological Survey in support of the National Atmospheric Deposition Program/National Trends Network

USGS Publications Warehouse

Latysh, Natalie E.; Wetherbee, Gregory A.

2005-01-01

The U.S. Geological Survey, Branch of Quality Systems, operates the external quality-assurance programs for the National Atmospheric Deposition Program/National Trends Network (NADP/NTN). Beginning in 1978, six different programs have been implemented?the intersite-comparison program, the blind-audit program, the sample-handling evaluation program, the field-audit program, the interlaboratory-comparison program, and the collocated-sampler program. Each program was designed to measure error contributed by specific components in the data-collection process. The intersite-comparison program, which was discontinued in 2004, was designed to assess the accuracy and reliability of field pH and specific-conductance measurements made by site operators. The blind-audit and sample-handling evaluation programs, which also were discontinued in 2002 and 2004, respectively, assessed contamination that may result from sampling equipment and routine handling and processing of the wet-deposition samples. The field-audit program assesses the effects of sample handling, processing, and field exposure. The interlaboratory-comparison program evaluates bias and precision of analytical results produced by the contract laboratory for NADP, the Illinois State Water Survey, Central Analytical Laboratory, and compares its performance with the performance of international laboratories. The collocated-sampler program assesses the overall precision of wet-deposition data collected by NADP/NTN. This report documents historical operations and the operating procedures for each of these external quality-assurance programs. USGS quality-assurance information allows NADP/NTN data users to discern between actual environmental trends and inherent measurement variability.

Quality and Variability of Online Available Physical Therapy Protocols From Academic Orthopaedic Surgery Programs for Anterior Cruciate Ligament Reconstruction.

PubMed

Makhni, Eric C; Crump, Erica K; Steinhaus, Michael E; Verma, Nikhil N; Ahmad, Christopher S; Cole, Brian J; Bach, Bernard R

2016-08-01

To assess the quality and variability found across anterior cruciate ligament (ACL) rehabilitation protocols published online by academic orthopaedic programs. Web-based ACL physical therapy protocols from United States academic orthopaedic programs available online were included for review. Main exclusion criteria included concomitant meniscus repair, protocols aimed at pediatric patients, and failure to provide time points for the commencement or recommended completion of any protocol components. A comprehensive, custom scoring rubric was created that was used to assess each protocol for the presence or absence of various rehabilitation components, as well as when those activities were allowed to be initiated in each protocol. Forty-two protocols were included for review from 155 U.S. academic orthopaedic programs. Only 13 protocols (31%) recommended a prehabilitation program. Five protocols (12%) recommended continuous passive motion postoperatively. Eleven protocols (26%) recommended routine partial or non-weight bearing immediately postoperatively. Ten protocols (24%) mentioned utilization of a secondary/functional brace. There was considerable variation in range of desired full-weight-bearing initiation (9 weeks), as well as in the types of strength and proprioception exercises specifically recommended. Only 8 different protocols (19%) recommended return to sport after achieving certain strength and activity criteria. Many ACL rehabilitation protocols recommend treatment modalities not supported by current reports. Moreover, high variability in the composition and time ranges of rehabilitation components may lead to confusion among patients and therapists. Level II. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Progress in SiC/SiC Ceramic Composite Development for Gas Turbine Hot-Section Components under NASA EPM and UEET Programs

NASA Technical Reports Server (NTRS)

DiCarlo, J. A.; Yun, Hee Mann; Morscher, Gregory N.; Bhatt, Ramakrishna T.

2002-01-01

The successful application of ceramic matrix composites as hot-section components in advanced gas turbine engines will require the development of constituent materials and processes that can provide the material systems with the key thermostructural properties required for long-term component service. Much initial progress in identifying these materials and processes was made under the former NASA Enabling Propulsion Materials Program using stoichiometric Sylramic (trademark) silicon-carbide (SiC) fibers, 2D (two dimensional)-woven fiber architectures, chemically vapor-infiltrated (CVI) BN fiber coatings (interphases), and SiC-based matrices containing CVI SiC interphase over-coatings, slurry-infiltrated SiC particulate, and melt-infiltrated (MI) silicon. The objective of this paper is to discuss the property benefits of this SiC/SiC composite system for high-temperature engine components and to elaborate on further progress in SiC/SiC development made under the new NASA Ultra Efficient Engine Technology Program. This progress stems from the recent development of advanced constituent materials and manufacturing processes, including specific treatments at NASA that improve the creep, rupture, and environmental resistance of the Sylramic fiber as well as the thermal conductivity and creep resistance of the CVI SiC over-coatings. Also discussed are recent observations concerning the detrimental effects of inadvertent carbon in the fiber-BN interfacial region and the beneficial effects of certain 2D-architectures for thin-walled SiC/SiC panels.

Cell type-specific translational repression of Cyclin B during meiosis in males.

PubMed

Baker, Catherine Craig; Gim, Byung Soo; Fuller, Margaret T

2015-10-01

The unique cell cycle dynamics of meiosis are controlled by layers of regulation imposed on core mitotic cell cycle machinery components by the program of germ cell development. Although the mechanisms that regulate Cdk1/Cyclin B activity in meiosis in oocytes have been well studied, little is known about the trans-acting factors responsible for developmental control of these factors in male gametogenesis. During meiotic prophase in Drosophila males, transcript for the core cell cycle protein Cyclin B1 (CycB) is expressed in spermatocytes, but the protein does not accumulate in spermatocytes until just before the meiotic divisions. Here, we show that two interacting proteins, Rbp4 and Fest, expressed at the onset of spermatocyte differentiation under control of the developmental program of male gametogenesis, function to direct cell type- and stage-specific repression of translation of the core G2/M cell cycle component cycB during the specialized cell cycle of male meiosis. Binding of Fest to Rbp4 requires a 31-amino acid region within Rbp4. Rbp4 and Fest are required for translational repression of cycB in immature spermatocytes, with Rbp4 binding sequences in a cell type-specific shortened form of the cycB 3' UTR. Finally, we show that Fest is required for proper execution of meiosis I. © 2015. Published by The Company of Biologists Ltd.

Is More Always Better in Designing Workplace Wellness Programs?: A Comparison of Wellness Program Components Versus Outcomes.

PubMed

Batorsky, Benjamin; Van Stolk, Christian; Liu, Hangsheng

2016-10-01

Assess whether adding more components to a workplace wellness program is associated with better outcomes by measuring the relationship of program components to one another and to employee participation and perceptions of program effectiveness. Data came from a 2014 survey of 24,393 employees of 81 employers about services offered, leadership, incentives, and promotion. Logistic regressions were used to model the relationship between program characteristics and outcomes. Components individually are related to better outcomes, but this relationship is weaker in the presence of other components and non-significant for incentives. Within components, a moderate level of services and work time participation opportunities are associated with higher participation and effectiveness. The "more of everything" approach does not appear to be advisable for all programs. Programs should focus on providing ample opportunities for employees to participate and initiatives like results-based incentives.

Alumni Perspectives on Career Preparation during a Postdoctoral Training Program: A Qualitative Study

PubMed Central

Faupel-Badger, Jessica M.; Raue, Kimberley; Nelson, David E.; Tsakraklides, Sophia

2015-01-01

Published evaluations of career preparation of alumni from long-standing postdoctoral fellowship programs in the biomedical sciences are limited and often focus on quantitative analysis of data from extant publicly available sources. Qualitative methods provide the opportunity to gather robust information about specific program elements from structured postdoctoral training programs and the influence of this training on subsequent career paths of alumni. In-depth interviews with a subset of the National Cancer Institute’s Cancer Prevention Fellowship Program (CPFP) alumni (n = 27), representing more than 25 years of the program’s history and multiple career sectors, were conducted to assess alumni reflections on the training environment and career preparation during their time in the CPFP. NVivo software was used to analyze data and identify major themes. Four main themes emerged from these interviews, including: the value of structured training curriculum, mentorship, transdisciplinary environment, and professional identity. Even when reflecting on training that occurred one to two decades earlier, alumni were able to highlight specific components of a structured postdoctoral training program as influencing their research and career trajectories. These results may have relevance for those interested in assessing how postdoctoral training can influence fellows throughout their careers and understanding salient features of structured programs. PMID:25673353

Effects of Gas Turbine Component Performance on Engine and Rotary Wing Vehicle Size and Performance

NASA Technical Reports Server (NTRS)

Snyder, Christopher A.; Thurman, Douglas R.

2010-01-01

In support of the Fundamental Aeronautics Program, Subsonic Rotary Wing Project, further gas turbine engine studies have been performed to quantify the effects of advanced gas turbine technologies on engine weight and fuel efficiency and the subsequent effects on a civilian rotary wing vehicle size and mission fuel. The Large Civil Tiltrotor (LCTR) vehicle and mission and a previous gas turbine engine study will be discussed as a starting point for this effort. Methodology used to assess effects of different compressor and turbine component performance on engine size, weight and fuel efficiency will be presented. A process to relate engine performance to overall LCTR vehicle size and fuel use will also be given. Technology assumptions and levels of performance used in this analysis for the compressor and turbine components performances will be discussed. Optimum cycles (in terms of power specific fuel consumption) will be determined with subsequent engine weight analysis. The combination of engine weight and specific fuel consumption will be used to estimate their effect on the overall LCTR vehicle size and mission fuel usage. All results will be summarized to help suggest which component performance areas have the most effect on the overall mission.

LED Systems Target Plant Growth

NASA Technical Reports Server (NTRS)

2010-01-01

To help develop technologies for growing edible biomass (food crops) in space, Kennedy Space Center partnered with Orbital Technologies Corporation (ORBITEC), of Madison, Wisconsin, through the Small Business Innovation Research (SBIR) program. One result of this research was the High Efficiency Lighting with Integrated Adaptive Control (HELIAC) system, components of which have been incorporated into a variety of agricultural greenhouse and consumer aquarium lighting features. The new lighting systems can be adapted to a specific plant species during a specific growth stage, allowing maximum efficiency in light absorption by all available photosynthetic tissues.

SQL Collaborative Learning Framework Based on SOA

NASA Astrophysics Data System (ADS)

Armiati, S.; Awangga, RM

2018-04-01

The research is focused on designing collaborative learning-oriented framework fulfilment service in teaching SQL Oracle 10g. Framework built a foundation of academic fulfilment service performed by a layer of the working unit in collaboration with Program Studi Manajemen Informatika. In the design phase defined what form of collaboration models and information technology proposed for Program Studi Manajemen Informatika by using a framework of collaboration inspired by the stages of modelling a Service Oriented Architecture (SOA). Stages begin with analyzing subsystems, this activity is used to determine subsystem involved and reliance as well as workflow between the subsystems. After the service can be identified, the second phase is designing the component specifications, which details the components that are implemented in the service to include the data, rules, services, profiles can be configured, and variations. The third stage is to allocate service, set the service to the subsystems that have been identified, and its components. Implementation framework contributes to the teaching guides and application architecture that can be used as a landing realize an increase in service by applying information technology.

Reducing environmental noise impacts: A USAREUR noise management program handbook

NASA Astrophysics Data System (ADS)

Feather, Timothy D.; Shekell, Ted K.

1991-06-01

Noise pollution is a major environmental problem faced by the U.S. Army in Europe. Noise-related complaints from German citizens can escalate into intense political issues in German communities. This in turn hampers efficient operation of military training and often times threatens the Army's mission. In order to remedy these problems, USAREUR has developed a noise management program. A successful noise management program will limit the impact of unavoidable noise on the populace. This report, a component of the noise management program, is a reference document for noise management planning. It contains guidelines and rules-of-thumb for noise management. This document contains procedures which operation and training level personnel can understand and apply in their day to day noise management planning. Noise mitigation tips are given. Basic technical information that will aid in understanding noise mitigation is provided along with noise management through land use planning. Noise management for specific components of the military community, (airfields, base operations, training areas, and housing and recreation areas) are addressed. The nature of noise generated, means of noise abatement at the source, path, and receiver (both physical and organizational/public relations methods), and a case study example are described.

Information adaptive system of NEEDS. [of NASA End to End Data System

NASA Technical Reports Server (NTRS)

Howle, W. M., Jr.; Kelly, W. L.

1979-01-01

The NASA End-to-End Data System (NEEDS) program was initiated by NASA to improve significantly the state of the art in acquisition, processing, and distribution of space-acquired data for the mid-1980s and beyond. The information adaptive system (IAS) is a program element under NEEDS Phase II which addresses sensor specific processing on board the spacecraft. The IAS program is a logical first step toward smart sensors, and IAS developments - particularly the system components and key technology improvements - are applicable to future smart efforts. The paper describes the design goals and functional elements of the IAS. In addition, the schedule for IAS development and demonstration is discussed.

The MHOST finite element program: 3-D inelastic analysis methods for hot section components. Volume 2: User's manual

NASA Technical Reports Server (NTRS)

Nakazawa, Shohei

1989-01-01

The user options available for running the MHOST finite element analysis package is described. MHOST is a solid and structural analysis program based on the mixed finite element technology, and is specifically designed for 3-D inelastic analysis. A family of 2- and 3-D continuum elements along with beam and shell structural elements can be utilized, many options are available in the constitutive equation library, the solution algorithms and the analysis capabilities. The outline of solution algorithms is discussed along with the data input and output, analysis options including the user subroutines and the definition of the finite elements implemented in the program package.

Software Design for Interactive Graphic Radiation Treatment Simulation Systems*

PubMed Central

Kalet, Ira J.; Sweeney, Christine; Jacky, Jonathan

1990-01-01

We examine issues in the design of interactive computer graphic simulation programs for radiation treatment planning (RTP), as well as expert system programs that automate parts of the RTP process, in light of ten years of experience at designing, building and using such programs. An experiment in object-oriented design using standard Pascal shows that while some advantage is gained from the design, it is still difficult to achieve modularity and to integrate expert system components. A new design based on the Common LISP Object System (CLOS) is described. This series of designs for RTP software shows that this application benefits in specific ways from object-oriented design methods and appropriate languages and tools.

Effectiveness and feasibility of early physical rehabilitation programs for geriatric hospitalized patients: a systematic review

PubMed Central

2013-01-01

Background Old adults admitted to the hospital are at severe risk of functional loss during hospitalization. Early in-hospital physical rehabilitation programs appear to prevent functional loss in geriatric patients. The first aim of this review was to investigate the effect of early physical rehabilitation programs on physical functioning among geriatric patients acutely admitted to the hospital. The second aim was to evaluate the feasibility of early physical rehabilitation programs. Methods Two searches, one for physical functioning and one for feasibility, were conducted in PubMed, CINAHL, and EMBASE. Additional studies were identified through reference and citation tracking. To be included articles had to report on in-hospital early physical rehabilitation of patients aged 65 years and older with an outcome measure of physical functioning. Studies were excluded when the treatment was performed on specialized units other than geriatric units. Randomized controlled trials were included to examine the effect of early physical rehabilitation on physical functioning, length of stay and discharge destination. To investigate feasibility also non randomized controlled trials were added. Results Fifteen articles, reporting on 13 studies, described the effect on physical functioning. The early physical rehabilitation programs were classified in multidisciplinary programs with an exercise component and usual care with an exercise component. Multidisciplinary programs focussed more on facilitating discharge home and independent ADL, whereas exercise programs aimed at improving functional outcomes. At time of discharge patients who had participated in a multidisciplinary program or exercise program improved more on physical functional tests and were less likely to be discharged to a nursing home compared to patients receiving only usual care. In addition, multidisciplinary programs reduced the length of hospital stay significantly. Follow-up interventions improved physical functioning after discharge. The feasibility search yielded four articles. The feasibility results showed that early physical rehabilitation for acutely hospitalized old adults was safe. Adherence rates differed between studies and the recruitment of patients was sometimes challenging. Conclusions Early physical rehabilitation care for acutely hospitalized old adults leads to functional benefits and can be safely executed. Further research is needed to specifically quantify the physical component in early physical rehabilitation programs. PMID:24112948

Effectiveness and feasibility of early physical rehabilitation programs for geriatric hospitalized patients: a systematic review.

PubMed

Kosse, Nienke M; Dutmer, Alisa L; Dasenbrock, Lena; Bauer, Jürgen M; Lamoth, Claudine J C

2013-10-10

Old adults admitted to the hospital are at severe risk of functional loss during hospitalization. Early in-hospital physical rehabilitation programs appear to prevent functional loss in geriatric patients. The first aim of this review was to investigate the effect of early physical rehabilitation programs on physical functioning among geriatric patients acutely admitted to the hospital. The second aim was to evaluate the feasibility of early physical rehabilitation programs. Two searches, one for physical functioning and one for feasibility, were conducted in PubMed, CINAHL, and EMBASE. Additional studies were identified through reference and citation tracking. To be included articles had to report on in-hospital early physical rehabilitation of patients aged 65 years and older with an outcome measure of physical functioning. Studies were excluded when the treatment was performed on specialized units other than geriatric units. Randomized controlled trials were included to examine the effect of early physical rehabilitation on physical functioning, length of stay and discharge destination. To investigate feasibility also non randomized controlled trials were added. Fifteen articles, reporting on 13 studies, described the effect on physical functioning. The early physical rehabilitation programs were classified in multidisciplinary programs with an exercise component and usual care with an exercise component. Multidisciplinary programs focussed more on facilitating discharge home and independent ADL, whereas exercise programs aimed at improving functional outcomes. At time of discharge patients who had participated in a multidisciplinary program or exercise program improved more on physical functional tests and were less likely to be discharged to a nursing home compared to patients receiving only usual care. In addition, multidisciplinary programs reduced the length of hospital stay significantly. Follow-up interventions improved physical functioning after discharge. The feasibility search yielded four articles. The feasibility results showed that early physical rehabilitation for acutely hospitalized old adults was safe. Adherence rates differed between studies and the recruitment of patients was sometimes challenging. Early physical rehabilitation care for acutely hospitalized old adults leads to functional benefits and can be safely executed. Further research is needed to specifically quantify the physical component in early physical rehabilitation programs.

EON: a component-based approach to automation of protocol-directed therapy.

PubMed Central

Musen, M A; Tu, S W; Das, A K; Shahar, Y

1996-01-01

Provision of automated support for planning protocol-directed therapy requires a computer program to take as input clinical data stored in an electronic patient-record system and to generate as output recommendations for therapeutic interventions and laboratory testing that are defined by applicable protocols. This paper presents a synthesis of research carried out at Stanford University to model the therapy-planning task and to demonstrate a component-based architecture for building protocol-based decision-support systems. We have constructed general-purpose software components that (1) interpret abstract protocol specifications to construct appropriate patient-specific treatment plans; (2) infer from time-stamped patient data higher-level, interval-based, abstract concepts; (3) perform time-oriented queries on a time-oriented patient database; and (4) allow acquisition and maintenance of protocol knowledge in a manner that facilitates efficient processing both by humans and by computers. We have implemented these components in a computer system known as EON. Each of the components has been developed, evaluated, and reported independently. We have evaluated the integration of the components as a composite architecture by implementing T-HELPER, a computer-based patient-record system that uses EON to offer advice regarding the management of patients who are following clinical trial protocols for AIDS or HIV infection. A test of the reuse of the software components in a different clinical domain demonstrated rapid development of a prototype application to support protocol-based care of patients who have breast cancer. PMID:8930854

Investigation of performance deterioration of the CF6/JT9D, high-bypass ratio turbofan engines

NASA Technical Reports Server (NTRS)

Ziemianski, J. A.; Mehalic, C. M.

1980-01-01

The aircraft energy efficiency program within NASA is developing technology required to improve the fuel efficiency of commercial subsonic transport aricraft. One segment of this program includes engine diagnostics which is directed toward determining the sources and causes of performance deterioration in the Pratt and Whitney Aircraft JT9D and General Electric CF6 high-bypass ratio turbofan engines and developing technology for minimizing the performance losses. Results of engine performance deterioration investigations based on historical data, special engine tests, and specific tests to define the influence of flight loads and component clearances on performance are presented. The results of analysis of several damage mechanisms that contribute to performance deterioration such as blade tip rubs, airfoil surface roughness and erosion, and thermal distortion are also included. The significance of these damage mechanisms on component and overall engine performance is discussed.

Self-Estimation of Blood Alcohol Concentration: A Review

PubMed Central

Aston, Elizabeth R.; Liguori, Anthony

2013-01-01

This article reviews the history of blood alcohol concentration (BAC) estimation training, which trains drinkers to discriminate distinct BAC levels and thus avoid excessive alcohol consumption. BAC estimation training typically combines education concerning alcohol metabolism with attention to subjective internal cues associated with specific concentrations. Estimation training was originally conceived as a component of controlled drinking programs. However, dependent drinkers were unsuccessful in BAC estimation, likely due to extreme tolerance. In contrast, moderate drinkers successfully acquired this ability. A subsequent line of research translated laboratory estimation studies to naturalistic settings by studying large samples of drinkers in their preferred drinking environments. Thus far, naturalistic studies have provided mixed results regarding the most effective form of BAC feedback. BAC estimation training is important because it imparts an ability to perceive individualized impairment that may be present below the legal limit for driving. Consequently, the training can be a useful component for moderate drinkers in drunk driving prevention programs. PMID:23380489

Software for Estimating Costs of Testing Rocket Engines

NASA Technical Reports Server (NTRS)

Hines, Merlon M.

2004-01-01

A high-level parametric mathematical model for estimating the costs of testing rocket engines and components at Stennis Space Center has been implemented as a Microsoft Excel program that generates multiple spreadsheets. The model and the program are both denoted, simply, the Cost Estimating Model (CEM). The inputs to the CEM are the parameters that describe particular tests, including test types (component or engine test), numbers and duration of tests, thrust levels, and other parameters. The CEM estimates anticipated total project costs for a specific test. Estimates are broken down into testing categories based on a work-breakdown structure and a cost-element structure. A notable historical assumption incorporated into the CEM is that total labor times depend mainly on thrust levels. As a result of a recent modification of the CEM to increase the accuracy of predicted labor times, the dependence of labor time on thrust level is now embodied in third- and fourth-order polynomials.

Software for Estimating Costs of Testing Rocket Engines

NASA Technical Reports Server (NTRS)

Hines, Merion M.

2002-01-01

A high-level parametric mathematical model for estimating the costs of testing rocket engines and components at Stennis Space Center has been implemented as a Microsoft Excel program that generates multiple spreadsheets. The model and the program are both denoted, simply, the Cost Estimating Model (CEM). The inputs to the CEM are the parameters that describe particular tests, including test types (component or engine test), numbers and duration of tests, thrust levels, and other parameters. The CEM estimates anticipated total project costs for a specific test. Estimates are broken down into testing categories based on a work-breakdown structure and a cost-element structure. A notable historical assumption incorporated into the CEM is that total labor times depend mainly on thrust levels. As a result of a recent modification of the CEM to increase the accuracy of predicted labor times, the dependence of labor time on thrust level is now embodied in third- and fourth-order polynomials.

Software for Estimating Costs of Testing Rocket Engines

NASA Technical Reports Server (NTRS)

Hines, Merlon M.

2003-01-01

A high-level parametric mathematical model for estimating the costs of testing rocket engines and components at Stennis Space Center has been implemented as a Microsoft Excel program that generates multiple spreadsheets. The model and the program are both denoted, simply, the Cost Estimating Model (CEM). The inputs to the CEM are the parameters that describe particular tests, including test types (component or engine test), numbers and duration of tests, thrust levels, and other parameters. The CEM estimates anticipated total project costs for a specific test. Estimates are broken down into testing categories based on a work-breakdown structure and a cost-element structure. A notable historical assumption incorporated into the CEM is that total labor times depend mainly on thrust levels. As a result of a recent modification of the CEM to increase the accuracy of predicted labor times, the dependence of labor time on thrust level is now embodied in third- and fourth-order polynomials.

Training adults and children with an autism spectrum disorder to be compliant with a clinical dental assessment using a TEACCH-based approach.

PubMed

Orellana, Lorena M; Martínez-Sanchis, Sonia; Silvestre, Francisco J

2014-04-01

The specific neuropsychological and sensory profile found in persons with autism spectrum disorders complicate dental procedures and as a result of this, most are treated under general anesthesia or unnecessary sedation. The main goal of the present study was to evaluate the effectiveness of a short treatment and education of autistic and related communication-handicapped children-based intervention program (five sessions) to facilitate a 10-component oral assessment in children (n = 38, aged 4-9 years) and adults (n = 34, aged 19-41) with autism spectrum disorder (with or without associated intellectual disability). The assessment ranges from entering into the examination room to the evaluation of the dental occlusion. There were statistically significant differences in the number of components reached and in compliance before and after the training program.

Summative Evaluation Findings from the Interstellar Boundary Explorer (IBEX) Education and Public Outreach Program

NASA Astrophysics Data System (ADS)

Bartolone, L.; Nichols-Yehling, M.; Davis, H. B.; Davey, B.

2014-07-01

The Interstellar Boundary Explorer mission includes a comprehensive Education and Public Outreach (EPO) program in heliophysics that is overseen and implemented by the Adler Planetarium and evaluated by Technology for Learning Consortium, Inc. Several components of the IBEX EPO program were developed during the prime phase of the mission that were specifically designed for use in informal institutions, especially museums and planetaria. The program included a widely distributed planetarium show with accompanying informal education activities, printed posters, lithographs and other resources, funding for the development of the GEMS Space Science Sequence for Grades 6-8 curriculum materials, development of the IBEX mission website, development of materials for people with special needs, participation in the Heliophysics Educator Ambassador program, and support for the Space Explorers Afterschool Science Club for Chicago Public Schools. In this paper, we present an overview of the IBEX EPO program summative evaluation techniques and results for 2008 through 2012.

Strategic Analysis Overview

NASA Technical Reports Server (NTRS)

Cirillo, William M.; Earle, Kevin D.; Goodliff, Kandyce E.; Reeves, J. D.; Stromgren, Chel; Andraschko, Mark R.; Merrill, R. Gabe

2008-01-01

NASA s Constellation Program employs a strategic analysis methodology in providing an integrated analysis capability of Lunar exploration scenarios and to support strategic decision-making regarding those scenarios. The strategic analysis methodology integrates the assessment of the major contributors to strategic objective satisfaction performance, affordability, and risk and captures the linkages and feedbacks between all three components. Strategic analysis supports strategic decision making by senior management through comparable analysis of alternative strategies, provision of a consistent set of high level value metrics, and the enabling of cost-benefit analysis. The tools developed to implement the strategic analysis methodology are not element design and sizing tools. Rather, these models evaluate strategic performance using predefined elements, imported into a library from expert-driven design/sizing tools or expert analysis. Specific components of the strategic analysis tool set include scenario definition, requirements generation, mission manifesting, scenario lifecycle costing, crew time analysis, objective satisfaction benefit, risk analysis, and probabilistic evaluation. Results from all components of strategic analysis are evaluated a set of pre-defined figures of merit (FOMs). These FOMs capture the high-level strategic characteristics of all scenarios and facilitate direct comparison of options. The strategic analysis methodology that is described in this paper has previously been applied to the Space Shuttle and International Space Station Programs and is now being used to support the development of the baseline Constellation Program lunar architecture. This paper will present an overview of the strategic analysis methodology and will present sample results from the application of the strategic analysis methodology to the Constellation Program lunar architecture.

[A meta-analysis of the effects of a self-efficacy promoting program].

PubMed

Cha, Bo Kyoung; Chang, Hae Kyung; Sohn, Jung Nam

2004-10-01

This meta-analysis was conducted to evaluate the effects of a self-efficacy promoting program and analyze its components. The material used for this study were 18 self-efficacy promoting program studies carried out from Jan. 1980 to Oct. 2003. The studies were analyzed in different categories: 1) types of dependent variables 2) sample characteristics 3) types of experimental treatment conditions 4) types of self-efficacy source and 5) total amount of time 1) The weighted mean of a self-efficacy promoting program ranged from 1.383 to 0.015 2) for the experimental treatment condition, exercise had a much larger effect in increasing general self-efficacy and self-care than education 3) the studies using 3 sources had a much larger effect in increasing self-care than the studies using 4 sources 4) a time period longer than 900 minutes had a much larger effect in increasing specific self-efficacy, general self-efficacy and self-care than in a time period shorter than 900 minutes. 5) effect size of specific self-efficacy was significantly higher than general self-efficacy. These results can be used to guide the development of a self-efficacy promoting program for nursing practice.

Teaching interpersonal skills in family practice: results of a national survey.

PubMed

Kahn, G; Cohen, B; Jason, H

1979-02-01

The increasing recognition of the importance of a well-developed set of interpersonal skills to the competent family physician has resulted in a rapid growth in the formal teaching of interpersonal skills within family practice residencies. Of the 168 programs responding to a national survey of family practice residencies, 88 percent indicated that they have formal programs in interpersonal skills. It is estimated that there are well over 500 family practice faculty members who have special responsibilities in teaching interpersonal skills. While most programs address the component skills of the interpersonal process (eg, demonstrating empathy, information gathering, information giving, and psychological intervention), it is of concern that only about half offer explicit training in patient education (53 percent), specific types of counseling (eg, family counseling, 55 percent), or some of the specific interpersonal skills important in team practice and practice management (eg, supervisory skills). One of the most striking findings was that 88 percent of the reporting programs use videotechnology, with 77 percent of these planning to increase their use. Although most programs evaluate their interpersonal skills training using both indirect and direct assessment methods, only 25 percent attempt to use patient outcome as a measure of teaching effectiveness.

Quantifying components of the hydrologic cycle in Virginia using chemical hydrograph separation and multiple regression analysis

USGS Publications Warehouse

Sanford, Ward E.; Nelms, David L.; Pope, Jason P.; Selnick, David L.

2012-01-01

This study by the U.S. Geological Survey, prepared in cooperation with the Virginia Department of Environmental Quality, quantifies the components of the hydrologic cycle across the Commonwealth of Virginia. Long-term, mean fluxes were calculated for precipitation, surface runoff, infiltration, total evapotranspiration (ET), riparian ET, recharge, base flow (or groundwater discharge) and net total outflow. Fluxes of these components were first estimated on a number of real-time-gaged watersheds across Virginia. Specific conductance was used to distinguish and separate surface runoff from base flow. Specific-conductance data were collected every 15 minutes at 75 real-time gages for approximately 18 months between March 2007 and August 2008. Precipitation was estimated for 1971–2000 using PRISM climate data. Precipitation and temperature from the PRISM data were used to develop a regression-based relation to estimate total ET. The proportion of watershed precipitation that becomes surface runoff was related to physiographic province and rock type in a runoff regression equation. Component flux estimates from the watersheds were transferred to flux estimates for counties and independent cities using the ET and runoff regression equations. Only 48 of the 75 watersheds yielded sufficient data, and data from these 48 were used in the final runoff regression equation. The base-flow proportion for the 48 watersheds averaged 72 percent using specific conductance, a value that was substantially higher than the 61 percent average calculated using a graphical-separation technique (the USGS program PART). Final results for the study are presented as component flux estimates for all counties and independent cities in Virginia.

Process evaluation of TXT2BFiT: a multi-component mHealth randomised controlled trial to prevent weight gain in young adults.

PubMed

Partridge, Stephanie R; Allman-Farinelli, Margaret; McGeechan, Kevin; Balestracci, Kate; Wong, Annette T Y; Hebden, Lana; Harris, Mark F; Bauman, Adrian; Phongsavan, Philayrath

2016-01-19

TXT2BFiT was one of the first few innovative mHealth programs designed for young adults (18-35 years) with demonstrated efficacy in weight management. However, research is lacking to understand intervention effectiveness, especially in complex, multi-component mHealth programs. This paper investigates participant perceptions of and engagement with the mHealth program components in the TXT2BFiT to understand program effects. Process evaluation data were collected continuously for the study duration. The TXT2BFiT program was a multi-component lifestyle program delivered intensively for 3-month followed by a 6-month maintenance phase. Program components included personalised coaching calls, text messages, emails, smartphone apps and website access. Process evaluation measures included frequency of use of components and frequency for number of components used (online survey data); dose delivered and engagement with program components (researcher logs and web platform reports); frequency, timing and difficulties experienced with program components (online survey data) and overall perceptions of program components (online survey data and semi-structured telephone interviews). Qualitative data analysis was performed using NVivo10. Over 80% of participants completed post-intervention (3-months, intervention, n = 110, control n = 104) and follow-up surveys (9-months, intervention, n = 96, control n = 104). Thirty intervention participants completed semi-structured telephone interviews. Participants reported high use of coaching calls, text messages and emails and no issues in content delivery from these components. These components were described as helping them to achieve their goals. Website and app use and engagement was low for the duration of the program. Participants would prefer incorporation of the self-monitoring apps and website resources into one smartphone application that can be individualised by entry of their personal data. Our process evaluation has allowed a comprehensive understanding of use and preference for different program components. The high value placed on the coaching calls is consistent with a desire for personalisation of the mHealth program and even further tailoring of text messages and emails. The findings of this study will be used to revise TXT2BFiT for future users. The trial is registered with the Australian New Zealand Clinical Trials Registry ( ACTRN12612000924853 ).

Overview of the National Aeronautics and Space Administration's Nondestructive Evaluation (NDE) Program

NASA Technical Reports Server (NTRS)

Generazio, Edward R.

2002-01-01

NASA's Office of Safety and Mission Assurance sponsors an Agency-wide NDE Program that supports Aeronautics and Space Transportation Technology, Human Exploration and Development of Space, Earth Science, and Space Science Enterprises. For each of these Enterprises, safety is the number one priority. Development of the next generation aero-space launch and transportation vehicles, satellites, and deep space probes have highlighted the enabling role that NDE plays in these advanced technology systems. Specific areas of advanced component development, component integrity, and structural heath management are critically supported by NDE technologies. The simultaneous goals of assuring safety, maintaining overall operational efficiency, and developing and utilizing revolutionary technologies to expand human activity and space-based commerce in the frontiers of air and space places increasing demands on the Agencies NDE infrastructure and resources. In this presentation, an overview of NASA's NDE Program will be presented, that includes a background and status of current Enterprise NDE issues, and the NDE investment areas being developed to meet Enterprise safety and mission assurance needs through the year 2009 and beyond.

Development costs for a nuclear electric propulsion stage.

NASA Technical Reports Server (NTRS)

Mondt, J. F.; Prickett, W. Z.

1973-01-01

Development costs are presented for an unmanned nuclear electric propulsion (NEP) stage based upon a liquid metal cooled, in-core thermionic reactor. A total of 120 kWe are delivered to the thrust subsystem which employs mercury ion engines for electric propulsion. This study represents the most recent cost evaluation of the development of a reactor power system for a wide range of nuclear space power applications. These include geocentric, and outer planet and other deep space missions. The development program is described for the total NEP stage, based upon specific development programs for key NEP stage components and subsystems.

Symbolic computer vector analysis

NASA Technical Reports Server (NTRS)

Stoutemyer, D. R.

1977-01-01

A MACSYMA program is described which performs symbolic vector algebra and vector calculus. The program can combine and simplify symbolic expressions including dot products and cross products, together with the gradient, divergence, curl, and Laplacian operators. The distribution of these operators over sums or products is under user control, as are various other expansions, including expansion into components in any specific orthogonal coordinate system. There is also a capability for deriving the scalar or vector potential of a vector field. Examples include derivation of the partial differential equations describing fluid flow and magnetohydrodynamics, for 12 different classic orthogonal curvilinear coordinate systems.

Refurbishment cost study of the thermal protection system of a space shuttle vehicle, phase 2

NASA Technical Reports Server (NTRS)

Haas, D. W.

1972-01-01

The labor costs and techniques associated with the refurbishment and maintenance of representative thermal protection system (TPS) components and their attachment concepts suitable for space shuttle application are defined, characterized, and evaluated from the results of an experimental test program. This program consisted of designing selected TPS concepts, fabricating and assembling test hardware, and performing a time and motion study of specific maintenance functions of the test hardware on a full-scale- mockup. Labor requirements and refurbishment techniques, as they relate to the maintenance functions of inspection, repair, removal, and replacement were identified.

Lambda: A Mathematica package for operator product expansions in vertex algebras

NASA Astrophysics Data System (ADS)

Ekstrand, Joel

2011-02-01

We give an introduction to the Mathematica package Lambda, designed for calculating λ-brackets in both vertex algebras, and in SUSY vertex algebras. This is equivalent to calculating operator product expansions in two-dimensional conformal field theory. The syntax of λ-brackets is reviewed, and some simple examples are shown, both in component notation, and in N=1 superfield notation. Program summaryProgram title: Lambda Catalogue identifier: AEHF_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHF_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License No. of lines in distributed program, including test data, etc.: 18 087 No. of bytes in distributed program, including test data, etc.: 131 812 Distribution format: tar.gz Programming language: Mathematica Computer: See specifications for running Mathematica V7 or above. Operating system: See specifications for running Mathematica V7 or above. RAM: Varies greatly depending on calculation to be performed. Classification: 4.2, 5, 11.1. Nature of problem: Calculate operator product expansions (OPEs) of composite fields in 2d conformal field theory. Solution method: Implementation of the algebraic formulation of OPEs given by vertex algebras, and especially by λ-brackets. Running time: Varies greatly depending on calculation requested. The example notebook provided takes about 3 s to run.

Automated reuseable components system study results

NASA Technical Reports Server (NTRS)

Gilroy, Kathy

1989-01-01

The Automated Reusable Components System (ARCS) was developed under a Phase 1 Small Business Innovative Research (SBIR) contract for the U.S. Army CECOM. The objectives of the ARCS program were: (1) to investigate issues associated with automated reuse of software components, identify alternative approaches, and select promising technologies, and (2) to develop tools that support component classification and retrieval. The approach followed was to research emerging techniques and experimental applications associated with reusable software libraries, to investigate the more mature information retrieval technologies for applicability, and to investigate the applicability of specialized technologies to improve the effectiveness of a reusable component library. Various classification schemes and retrieval techniques were identified and evaluated for potential application in an automated library system for reusable components. Strategies for library organization and management, component submittal and storage, and component search and retrieval were developed. A prototype ARCS was built to demonstrate the feasibility of automating the reuse process. The prototype was created using a subset of the classification and retrieval techniques that were investigated. The demonstration system was exercised and evaluated using reusable Ada components selected from the public domain. A requirements specification for a production-quality ARCS was also developed.

Design Choices for Thermofluid Flow Components and Systems that are Exported as Functional Mockup Units

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wetter, Michael; Fuchs, Marcus; Nouidui, Thierry

This paper discusses design decisions for exporting Modelica thermofluid flow components as Functional Mockup Units. The purpose is to provide guidelines that will allow building energy simulation programs and HVAC equipment manufacturers to effectively use FMUs for modeling of HVAC components and systems. We provide an analysis for direct input-output dependencies of such components and discuss how these dependencies can lead to algebraic loops that are formed when connecting thermofluid flow components. Based on this analysis, we provide recommendations that increase the computing efficiency of such components and systems that are formed by connecting multiple components. We explain what codemore » optimizations are lost when providing thermofluid flow components as FMUs rather than Modelica code. We present an implementation of a package for FMU export of such components, explain the rationale for selecting the connector variables of the FMUs and finally provide computing benchmarks for different design choices. It turns out that selecting temperature rather than specific enthalpy as input and output signals does not lead to a measurable increase in computing time, but selecting nine small FMUs rather than a large FMU increases computing time by 70%.« less

Electro-Optic Computing Architectures: Volume II. Components and System Design and Analysis

DTIC Science & Technology

1998-02-01

The objective of the Electro - Optic Computing Architecture (EOCA) program was to develop multi-function electro - optic interfaces and optical...interconnect units to enhance the performance of parallel processor systems and form the building blocks for future electro - optic computing architectures...Specifically, three multi-function interface modules were targeted for development - an Electro - Optic Interface (EOI), an Optical Interconnection Unit

Potential structural material problems in a hydrogen energy system

NASA Technical Reports Server (NTRS)

Gray, H. R.; Nelson, H. G.; Johnson, R. E.; Mcpherson, B.; Howard, F. S.; Swisher, J. H.

1975-01-01

Potential structural material problems that may be encountered in the three components of a hydrogen energy system - production, transmission/storage, and utilization - were identified. Hydrogen embrittlement, corrosion, oxidation, and erosion may occur during the production of hydrogen. Hydrogen embrittlement is of major concern during both transmission and utilization of hydrogen. Specific materials research and development programs necessary to support a hydrogen energy system are described.

SSME Alternate Turbopump Development Program: Design verification specification for high-pressure fuel turbopump

NASA Technical Reports Server (NTRS)

1989-01-01

The design and verification requirements are defined which are appropriate to hardware at the detail, subassembly, component, and engine levels and to correlate these requirements to the development demonstrations which provides verification that design objectives are achieved. The high pressure fuel turbopump requirements verification matrix provides correlation between design requirements and the tests required to verify that the requirement have been met.

Development of Follow-Up Questionnaires for Vocational and Transfer Students at the El Paso Community College and Development of Faculty Motivation Scales. Consulting Report.

ERIC Educational Resources Information Center

Whitmore, Paul G.

The primary purpose of the student follow-up questionnaires was to identify instructional and curricular deficiencies in sufficiently specific terms to provide a basis for correcting the deficiencies. This effort was part of the evaluation component of a program dealing with the systematization of instruction. Two instruments were developed: one…

Recommendations for the treatment of aging in standard technical specifications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orton, R.D.; Allen, R.P.

1995-09-01

As part of the US Nuclear Regulatory Commission`s Nuclear Plant Aging Research Program, Pacific Northwest Laboratory (PNL) evaluated the standard technical specifications for nuclear power plants to determine whether the current surveillance requirements (SRs) were effective in detecting age-related degradation. Nuclear Plant Aging Research findings for selected systems and components were reviewed to identify the stressors and operative aging mechanisms and to evaluate the methods available to detect, differentiate, and trend the resulting aging degradation. Current surveillance and testing requirements for these systems and components were reviewed for their effectiveness in detecting degraded conditions and for potential contributions to prematuremore » degradation. When the current surveillance and testing requirements appeared ineffective in detecting aging degradation or potentially could contribute to premature degradation, a possible deficiency in the SRs was identified that could result in undetected degradation. Based on this evaluation, PNL developed recommendations for inspection, surveillance, trending, and condition monitoring methods to be incorporated in the SRs to better detect age- related degradation of these selected systems and components.« less

Long-term Controlled Drug Release from bi-component Electrospun Fibers

NASA Astrophysics Data System (ADS)

Xu, Shanshan; Zhang, Zixin; Xia, Qinghua; Han, Charles

Multi-drug delivery systems with timed programmed release are hard to be produced due to the complex drug release kinetics which mainly refers to the diffusion of drug molecules from the fiber and the degradation of the carrier. This study focused on the whole life-time story of the long-term drug releasing fibrous systems. Electrospun membrane utilizing FDA approved polymers and broad-spectrum antibiotics showed specific drug release profiles which could be divided into three stages based on the profile slope. With throughout morphology observation, cumulative release amount and releasing duration, releasing kinetics and critical factors were fully discussed during three stages. Through changing the second component, approximately linear drug release profile and a drug release duration about 13 days was prepared, which is perfect for preventing post-operative infection. The addition of this semi-crystalline polymer in turn influenced the fiber swelling and created drug diffusion channels. In conclusion, through adjusting and optimization of the blending component, initial burst release, delayed release for certain duration, and especially the sustained release profile could all be controlled, as well as specific anti-bacterial behavior could be obtained.

Communication interval selection in distributed heterogeneous simulation of large-scale dynamical systems

NASA Astrophysics Data System (ADS)

Lucas, Charles E.; Walters, Eric A.; Jatskevich, Juri; Wasynczuk, Oleg; Lamm, Peter T.

2003-09-01

In this paper, a new technique useful for the numerical simulation of large-scale systems is presented. This approach enables the overall system simulation to be formed by the dynamic interconnection of the various interdependent simulations, each representing a specific component or subsystem such as control, electrical, mechanical, hydraulic, or thermal. Each simulation may be developed separately using possibly different commercial-off-the-shelf simulation programs thereby allowing the most suitable language or tool to be used based on the design/analysis needs. These subsystems communicate the required interface variables at specific time intervals. A discussion concerning the selection of appropriate communication intervals is presented herein. For the purpose of demonstration, this technique is applied to a detailed simulation of a representative aircraft power system, such as that found on the Joint Strike Fighter (JSF). This system is comprised of ten component models each developed using MATLAB/Simulink, EASY5, or ACSL. When the ten component simulations were distributed across just four personal computers (PCs), a greater than 15-fold improvement in simulation speed (compared to the single-computer implementation) was achieved.

Enabler for the agile virtual enterprise

NASA Astrophysics Data System (ADS)

Fuerst, Karl; Schmidt, Thomas; Wippel, Gerald

2001-10-01

In this presentation, a new approach for a flexible low-cost Internet extended enterprise (project FLoCI-EE) will be presented. FLoCI-EE is a project in the fifth framework program of the European commission with 8 partners from 4 countries, which started in January 2001 and will be finished in December 2003. The main objective of FLoCI-EE is the development of a software prototype, which enables flexible enterprise cooperation with the aim to design, manufacture and sell products commonly, independent of enterprise borderlines. The needed IT-support includes functions of product data management (PDM), enterprise resource planning (ERP), supply chain management (SCM) and customer relationship management (CRM). Especially for small and medium sized enterprises, existing solutions are too expensive and inflexible to be of use under current turbulent market conditions. The second part of this paper covers the item Web Services, because in the role-specific support approach of FLoCI-EE, there are user- interface-components, which are tailored for specific roles in an enterprise. These components integrate automatically the services of the so-called basic-components, and the externally offered Web Services like UDDI.

Programming of respiratory health in childhood: influence of outdoor air pollution.

PubMed

Wright, Rosalind J; Brunst, Kelly J

2013-04-01

This overview highlights recent experimental and epidemiological evidence for the programming effects of outdoor air pollution exposures during early development on lung function and chronic respiratory disorders, such as asthma and related allergic disorders. Air pollutants may impact anatomy and/or physiological functioning of the lung and interrelated systems. Programming effects may result from pollutant-induced shifts in a number of molecular, cellular, and physiological states and their interacting systems. Specific key regulatory systems susceptible to programming may influence lung development and vulnerability to respiratory diseases, including both central and peripheral components of neuroendocrine pathways and autonomic nervous system (ANS) functioning which, in turn, influence the immune system. Starting in utero, environmental factors, including air pollutants, may permanently organize these systems toward trajectories of enhanced pediatric (e.g., asthma, allergy) as well as adult disease risk (e.g., chronic obstructive pulmonary disease). Evidence supports a central role of oxidative stress in the toxic effects of air pollution. Additional research suggests xenobiotic metabolism and subcellular components, such as mitochondria are targets of ambient air pollution and play a role in asthma and allergy programming. Mechanisms operating at the level of the placenta are being elucidated. Epigenetic mechanisms may be at the roots of adaptive developmental programming. Optimal coordinated functioning of many complex processes and their networks of interaction are necessary for normal lung development and the maintenance of respiratory health. Outdoor air pollution may play an important role in early programming of respiratory health and is potentially amenable to intervention.

External quality-assurance results for the National Atmospheric Deposition Program/National Trends Network, 2002-03

USGS Publications Warehouse

Wetherbee, Gregory A.; Latysh, Natalie E.; Burke, Kevin P.

2005-01-01

Six external quality-assurance programs were operated by the U.S. Geological Survey (USGS) External Quality-Assurance (QA) Project for the National Atmospheric Deposition Program/National Trends Network (NADP/NTN) from 2002 through 2003. Each program measured specific components of the overall error inherent in NADP/NTN wet-deposition measurements. The intersite-comparison program assessed the variability and bias of pH and specific conductance determinations made by NADP/NTN site operators twice per year with respect to accuracy goals. The percentage of site operators that met the pH accuracy goals decreased from 92.0 percent in spring 2002 to 86.3 percent in spring 2003. In these same four intersite-comparison studies, the percentage of site operators that met the accuracy goals for specific conductance ranged from 94.4 to 97.5 percent. The blind-audit program and the sample-handling evaluation (SHE) program evaluated the effects of routine sample handling, processing, and shipping on the chemistry of weekly NADP/NTN samples. The blind-audit program data indicated that the variability introduced by sample handling might be environmentally significant to data users for sodium, potassium, chloride, and hydrogen ion concentrations during 2002. In 2003, the blind-audit program was modified and replaced by the SHE program. The SHE program was designed to control the effects of laboratory-analysis variability. The 2003 SHE data had less overall variability than the 2002 blind-audit data. The SHE data indicated that sample handling buffers the pH of the precipitation samples and, in turn, results in slightly lower conductivity. Otherwise, the SHE data provided error estimates that were not environmentally significant to data users. The field-audit program was designed to evaluate the effects of onsite exposure, sample handling, and shipping on the chemistry of NADP/NTN precipitation samples. Field-audit results indicated that exposure of NADP/NTN wet-deposition samples to onsite conditions tended to neutralize the acidity of the samples by less than 1.0 microequivalent per liter. Onsite exposure of the sampling bucket appeared to slightly increase the concentration of most of the analytes but not to an extent that was environmentally significant to NADP data users. An interlaboratory-comparison program was used to estimate the analytical variability and bias of the NADP Central Analytical Laboratory (CAL) during 2002-03. Bias was identified in the CAL data for calcium, magnesium, sodium, potassium, ammonium, chloride, nitrate, sulfate, hydrogen ion, and specific conductance, but the absolute value of the bias was less than analytical minimum detection limits for all constituents except magnesium, nitrate, sulfate, and specific conductance. Control charts showed that CAL results were within statistical control approximately 90 percent of the time. Data for the analysis of ultrapure deionized-water samples indicated that CAL did not have problems with laboratory contamination. During 2002-03, the overall variability of data from the NADP/NTN precipitation-monitoring system was estimated using data from three collocated monitoring sites. Measurement differences of constituent concentration and deposition for paired samples from the collocated samplers were evaluated to compute error terms. The medians of the absolute percentage errors (MAEs) for the paired samples generally were larger for cations (approximately 8 to 50 percent) than for anions (approximately 3 to 33 percent). MAEs were approximately 16 to 30 percent for hydrogen-ion concentration, less than 10 percent for specific conductance, less than 5 percent for sample volume, and less than 8 percent for precipitation depth. The variability attributed to each component of the sample-collection and analysis processes, as estimated by USGS quality-assurance programs, varied among analytes. Laboratory analysis variability accounted for approximately 2 percent of the

The effect of facilitator training on the development and practice of participants in an online induction program for teachers of science and mathematics

NASA Astrophysics Data System (ADS)

Taylor, Peggy Sue

Learning in computer-mediated conferencing systems requires frequent and open interaction in environments that foster sharing and examination of group knowledge and experiences. Written dialogue is the means by which this interaction takes place. This study examined the effects of a training program designed for facilitators in the e-Mentoring for Student Success (eMSS) program, which provides online induction for beginning science and mathematics teachers. The training was designed to improve the quality of dialogue among participants in the program. The intervention consisted of three components: (1) an online training institute prior to beginning of the program year, (2) placement of facilitators in positions within the discussion areas of the program, and (3) ongoing online support for practicing facilitators. Three examinations were conducted in this mixed-method study. First, preintervention program dialogue was quantitatively compared to post-intervention program dialogue through use of a program-specific rubric to code program discussions. Second, case studies were conducted to determine how the training affected the practices of seven program facilitators and which components of the training effected change or growth. Third, pre and post intervention surveys were administered to all participants of the training to obtain their perceptions of their development as a result of the intervention. Comparison of dialogue before and after the intervention indicated a significant improvement in dialogue quality in the discussion areas of the program. Case studies of facilitators' practices revealed areas of the training that impacted the skills and strategies that facilitators used in efforts to foster increased and improved dialogue. Survey results indicated that participants gained a better understanding of what constituted quality dialogue in terms of the eMSS program and how better to foster quality dialogue in an online environment. Components of the training found to be effective in helping facilitators to foster dialogue improvement were: (1) focus on program goals and vision, (2) focus on the nature of online communication, (3) practice with the analysis of actual program dialogue, (4) practice in composing effective online messages. Implications for online facilitators are discussed and recommendations are made for designing training for facilitators to work in computer-mediated conferences.

A primer on precision medicine informatics.

PubMed

Sboner, Andrea; Elemento, Olivier

2016-01-01

In this review, we describe key components of a computational infrastructure for a precision medicine program that is based on clinical-grade genomic sequencing. Specific aspects covered in this review include software components and hardware infrastructure, reporting, integration into Electronic Health Records for routine clinical use and regulatory aspects. We emphasize informatics components related to reproducibility and reliability in genomic testing, regulatory compliance, traceability and documentation of processes, integration into clinical workflows, privacy requirements, prioritization and interpretation of results to report based on clinical needs, rapidly evolving knowledge base of genomic alterations and clinical treatments and return of results in a timely and predictable fashion. We also seek to differentiate between the use of precision medicine in germline and cancer. © The Author 2015. Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

Lithium Circuit Test Section Design and Fabrication

NASA Technical Reports Server (NTRS)

Godfroy, Thomas; Garber, Anne

2006-01-01

The Early Flight Fission - Test Facilities (EFF-TF) team has designed and built an actively pumped lithium flow circuit. Modifications were made to a circuit originally designed for NaK to enable the use of lithium that included application specific instrumentation and hardware. Component scale freeze/thaw tests were conducted to both gain experience with handling and behavior of lithium in solid and liquid form and to supply anchor data for a Generalized Fluid System Simulation Program (GFSSP) model that was modified to include the physics for freeze/thaw transitions. Void formation was investigated. The basic circuit components include: reactor segment, lithium to gas heat exchanger, electromagnetic (EM) liquid metal pump, load/drain reservoir, expansion reservoir, instrumentation, and trace heaters. This paper will discuss the overall system design and build and the component testing findings.

Lithium Circuit Test Section Design and Fabrication

NASA Astrophysics Data System (ADS)

Godfroy, Thomas; Garber, Anne; Martin, James

2006-01-01

The Early Flight Fission - Test Facilities (EFF-TF) team has designed and built an actively pumped lithium flow circuit. Modifications were made to a circuit originally designed for NaK to enable the use of lithium that included application specific instrumentation and hardware. Component scale freeze/thaw tests were conducted to both gain experience with handling and behavior of lithium in solid and liquid form and to supply anchor data for a Generalized Fluid System Simulation Program (GFSSP) model that was modified to include the physics for freeze/thaw transitions. Void formation was investigated. The basic circuit components include: reactor segment, lithium to gas heat exchanger, electromagnetic (EM) liquid metal pump, load/drain reservoir, expansion reservoir, instrumentation, and trace heaters. This paper discusses the overall system design and build and the component testing findings.

A leadership initiative to improve communication and enhance safety.

PubMed

Donahue, Moreen; Miller, Matthew; Smith, Lisa; Dykes, Patricia; Fitzpatrick, Joyce J

2011-01-01

The EMPOWER project was a collaborative effort to promote a culture of patient safety at Danbury Hospital through an interdisciplinary leadership-driven communication program. The "EMPOWER" component includes Educating and Mentoring Paraprofessionals On Ways to Enhance Reporting of changes in patient status. Specifically, the EMPOWER program was designed to prepare paraprofessional staff (PPS) to communicate changes in patient status using SBAR (situation, background, assessment, recommendations) structured communication. The specific project goals included (a) translation of SBAR structured communication methods for use with PPS, (b) reduction of cultural and educational barriers to interdisciplinary communication, and (c) examination of the effect of the EMPOWER intervention on the PPS communication practices and perceptions of the patient safety culture. Results of the project indicate a change in the use of SBAR throughout the institution, with particular improvement in communication from PPS to professional staff.

Vibroacoustic test plan evaluation: Parameter variation study

NASA Technical Reports Server (NTRS)

Stahle, C. V.; Gongloef, H. R.

1976-01-01

Statistical decision models are shown to provide a viable method of evaluating the cost effectiveness of alternate vibroacoustic test plans and the associated test levels. The methodology developed provides a major step toward the development of a realistic tool to quantitatively tailor test programs to specific payloads. Testing is considered at the no test, component, subassembly, or system level of assembly. Component redundancy and partial loss of flight data are considered. Most and probabilistic costs are considered, and incipient failures resulting from ground tests are treated. Optimums defining both component and assembly test levels are indicated for the modified test plans considered. modeling simplifications must be considered in interpreting the results relative to a particular payload. New parameters introduced were a no test option, flight by flight failure probabilities, and a cost to design components for higher vibration requirements. Parameters varied were the shuttle payload bay internal acoustic environment, the STS launch cost, the component retest/repair cost, and the amount of redundancy in the housekeeping section of the payload reliability model.

Avionics System Architecture Tool

NASA Technical Reports Server (NTRS)

Chau, Savio; Hall, Ronald; Traylor, marcus; Whitfield, Adrian

2005-01-01

Avionics System Architecture Tool (ASAT) is a computer program intended for use during the avionics-system-architecture- design phase of the process of designing a spacecraft for a specific mission. ASAT enables simulation of the dynamics of the command-and-data-handling functions of the spacecraft avionics in the scenarios in which the spacecraft is expected to operate. ASAT is built upon I-Logix Statemate MAGNUM, providing a complement of dynamic system modeling tools, including a graphical user interface (GUI), modeling checking capabilities, and a simulation engine. ASAT augments this with a library of predefined avionics components and additional software to support building and analyzing avionics hardware architectures using these components.

Sampling protocol for monitoring abiotic and biotic characteristics of mountain ponds and lakes

USGS Publications Warehouse

Hoffman, Robert L.; Tyler, Torrey J.; Larson, Gary L.; Adams, Michael J.; Wente, Wendy; Galvan, Stephanie

2005-01-01

This document describes field techniques and procedures used for sampling mountain ponds and lakes. These techniques and procedures will be used primarily to monitor, as part of long-term programs in National Parks and other protected areas, the abiotic and biotic characteristics of naturally occurring permanent montane lentic systems up to 75 ha in surface area. However, the techniques and procedures described herein also can be used to sample temporary or ephemeral montane lentic sites. Each Standard Operating Procedure (SOP) section addresses a specific component of the limnological investigation, and describes in detail field sampling methods pertaining to parameters to be measured for each component.

Supporting aboriginal knowledge and practice in health care: lessons from a qualitative evaluation of the strong women, strong babies, strong culture program.

PubMed

Lowell, Anne; Kildea, Sue; Liddle, Marlene; Cox, Barbara; Paterson, Barbara

2015-02-05

The Strong Women, Strong Babies, Strong Culture Program (the Program) evolved from a recognition of the value of Aboriginal knowledge and practice in promoting maternal and child health (MCH) in remote communities of the Northern Territory (NT) of Australia. Commencing in 1993 it continues to operate today. In 2008, the NT Department of Health commissioned an evaluation to identify enabling factors and barriers to successful implementation of the Program, and to identify potential pathways for future development. In this paper we focus on the evaluation findings related specifically to the role of Aborignal cultural knowledge and practice within the Program. A qualitative evaluation utilised purposive sampling to maximise diversity in program history and Aboriginal culture. Semi-structured, in-depth interviews with 76 participants were recorded in their preferred language with a registered Interpreter when required. Thematic analysis of data was verified or modified through further discussions with participants and members of the evaluation team. Although the importance of Aboriginal knowledge and practice as a fundamental component of the Program is widely acknowledged, there has been considerable variation across time and location in the extent to which these cultural dimensions have been included in practice. Factors contributing to this variation are complex and relate to a number of broad themes including: location of control over Program activities; recognition and respect for Aboriginal knowledge and practice as a legitimate component of health care; working in partnership; communication within and beyond the Program; access to transport and working space; and governance and organisational support. We suggest that inclusion of Aboriginal knowledge and practice as a fundamental component of the Program is key to its survival over more than twenty years despite serious challenges. Respect for the legitimacy of Aboriginal knowledge and practice within health care, a high level of community participation and control supported through effective governance and sufficient organisational commitment as well as competence in intercultural collaborative practice of health staff are critical requirements for realising the potential for cultural knowledge and practice to improve Aboriginal health outcomes.

Measuring sustainment of prevention programs and initiatives: a study protocol.

PubMed

Palinkas, Lawrence A; Spear, Suzanne E; Mendon, Sapna J; Villamar, Juan; Valente, Thomas; Chou, Chi-Ping; Landsverk, John; Kellam, Shepperd G; Brown, C Hendricks

2016-07-16

Sustaining prevention efforts directed at substance use and mental health problems is one of the greatest, yet least understood, challenges in the field of implementation science. A large knowledge gap exists regarding the meaning of the term "sustainment" and what factors predict or even measure sustainability of effective prevention programs and support systems. The U.S. Substance Abuse and Mental Health Services Administration (SAMHSA) supports a diverse portfolio of prevention and treatment grant programs that aim to improve population and individual level behavioral health. This study focuses on four SAMHSA prevention grant programs, two of which target substance abuse prevention at the state or single community level, one targets suicide prevention, and one targets prevention of aggressive/disruptive behavior in elementary schools. An examination of all four grant programs simultaneously provides an opportunity to determine what is meant by the term sustainment and identify and support both the unique requirements for improving sustainability for each program as well as for developing a generalizable framework comprised of core components of sustainment across diverse prevention approaches. Based on an analysis of qualitative and quantitative data of 10 grantees supported by these four programs, we will develop a flexible measurement system, with both general and specific components, that can bring precision to monitoring sustainment of infrastructure, activities, and outcomes for each prevention approach. We will then transform this system for use in evaluating and improving the likelihood of achieving prevention effort sustainment. To achieve these goals, we will (1) identify core components of sustainment of prevention programs and their support infrastructures; (2) design a measurement system for monitoring and providing feedback regarding sustainment within the four SAMHSA's prevention-related grant programs; and (3) pilot test the predictability of this multilevel measurement system across these programs and the feasibility and acceptability of a measurement system to evaluate and improve the likelihood of sustainment. This project is intended to improve sustainment of the supporting prevention infrastructure, activities, and outcomes that are funded by federal, state, community, and foundation sources.

Power management and distribution system for a More-Electric Aircraft (MADMEL) -- Program status

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maldonado, M.A.; Shah, N.M.; Cleek, K.J.

1995-12-31

A number of technology breakthroughs in recent years have rekindled the concept of a more-electric aircraft. High-power solid-state switching devices, electrohydrostatic actuators (EHAs), electromechanical actuators (EMAs), and high-power generators are just a few examples of component developments that have made dramatic improvements in properties such as weight, size, power, and cost. However, these components cannot be applied piecemeal. A complete, and somewhat revolutionary, system design approach is needed to exploit the benefits that a more-electric aircraft can provide. A five-phase Power Management and Distribution System for a More-Electric Aircraft (MADMEL) program was awarded by the Air Force to the Northrop/Grumman,more » Military Aircraft Division team in September 1991. The objective of the program is to design, develop, and demonstrate an advanced electrical power generation and distribution system for a more-electric aircraft (MEA). The MEA emphasizes the use of electrical power in place of hydraulics, pneumatic, and mechanical power to optimize the performance and life cycle cost of the aircraft. This paper presents an overview of the MADMEL program and a top-level summary of the program results, development and testing of major components to date. In Phase 1 and Phase 2 studies, the electrical load requirements were established and the electrical power system architecture was defined for both near-term (NT-year 1996) and far-term (FT-year 2003) MEA application. The detailed design and specification for the electrical power system (EPS), its interface with the Vehicle Management System, and the test set-up were developed under the recently completed Phase 3. The subsystem level hardware fabrication and testing will be performed under the on-going Phase 4 activities. The overall system level integration and testing will be performed in Phase 5.« less

Fostering Healthy Futures for Teens: Adaptation of an Evidence-Based Program

PubMed Central

Taussig, Heather; Weiler, Lindsey; Rhodes, Tara; Hambrick, Erin; Wertheimer, Robyn; Fireman, Orah; Combs, Melody

2015-01-01

Objective This article describes the process of adapting and implementing a complex, multicomponent intervention for a new population. Specifically, the article delineates the development and implementation of the Fostering Healthy Futures for Teens (FHF-T) program, which is an adaptation and extension of the Fostering Healthy Futures® (FHF) preventive intervention. FHF is a 9-month mentoring and skills group program for 9 to 11 year olds recently placed in foster care. Following the designation of FHF as an evidence-based intervention, there was increasing demand for the program. However, the narrow population for which FHF had demonstrated efficacy limited broader implementation of the existing intervention. FHF-T was designed to extend the reach of the program by adapting the FHF intervention for adolescents in the early years of high school who have a history of out-of-home care. Specifically, this adaptation recognizes key developmental differences between preadolescent and adolescent populations. Method After designing a program model and adapting the program components, the FHF-T mentoring program was implemented with 42 youth over 2 program years. Results Of the teens who were offered the program, 75% chose to enroll, and 88% of those graduated 9 months later. Although the program evidenced high rates of uptake and participant satisfaction, some unexpected challenges were encountered that will need to be addressed in future iterations of the program. Conclusions Too often program adaptations are made without careful consideration of important contextual issues, and too infrequently, these adapted programs are studied. Our process of program adaptation with rigorous measurement of program implementation provides a useful model for other evidence-based programs seeking thoughtful adaptation. PMID:27019678

Environmental Education and Development Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-03-01

The Environmental Education and Development Program is a component on the effort to accomplish the Office of Environmental Restoration and Waste Management`s (EM) goal of environmental compliance and cleanup of the 1989 inventory of inactive DOE sites and facilities by the year 2019. Education and Development programs were designed specifically to stimulate the knowledge and workforce capability necessary to achieve EM goals while contributing to DOE`s overall goal of increasing scientific and technical literacy and competency. The primary implementation criterion for E&D activities involved a focus on programs and projects that had both immediate and long-range leveraging effects on infrastructure.more » This focus included programs that yielded short term results (one to five years), as well as long-term results, to ensure a steady supply of appropriately trained and educated human resources, including women and minorities, to meet EM`s demands.« less

Analyzing best practices in employee health management: how age, sex, and program components relate to employee engagement and health outcomes.

PubMed

Terry, Paul E; Grossmeier, Jessica; Mangen, David J; Gingerich, Stefan B

2013-04-01

Examine the influence of employee health management (EHM) best practices on registration, participation, and health behavior change in telephone-based coaching programs. Individual health assessment data, EHM program data, and health coaching participation data were analyzed for associations with coaching program enrollment, active participation, and risk reduction. Multivariate analyses occurred at the individual (n = 205,672) and company levels (n = 55). Considerable differences were found in how age and sex impacted typical EHM evaluation metrics. Cash incentives for the health assessment were associated with more risk reduction for men than for women. Providing either a noncash or a benefits-integrated incentive for completing the health assessment, or a noncash incentive for lifestyle management, strengthened the relationship between age and risk reduction. In EHM programs, one size does not fit all. These results can help employers tailor engagement strategies for their specific population.

Individual preferences for physical exercise as secondary prevention for non-specific low back pain: A discrete choice experiment

PubMed Central

Hagberg, Jan; Axén, Iben; Kwak, Lydia; Lohela-Karlsson, Malin; Skillgate, Eva; Dahlgren, Gunilla; Jensen, Irene

2017-01-01

Background Exercise is effective in improving non-specific low back pain (LBP). Certain components of physical exercise, such as the type, intensity and frequency of exercise, are likely to influence participation among working adults with non-specific LBP, but the value and relative importance of these components remain unknown. The study’s aim was to examine such specific components and their influence on individual preferences for exercise for secondary prevention of non-specific LBP among working adults. Methods In a discrete choice experiment, working individuals with non-specific LBP answered a web-based questionnaire. Each respondent was given ten pairs of hypothetical exercise programs and asked to choose one option from each pair. The choices comprised six attributes of exercise (i.e., type of training, design, intensity, frequency, proximity and incentives), each with either three or four levels. A conditional logit regression that reflected the random utility model was used to analyze the responses. Results The final study population consisted of 112 participants. The participants’ preferred exercise option was aerobic (i.e., cardiovascular) rather than strength training, group exercise with trainer supervision, rather than individual or unsupervised exercise. They also preferred high intensity exercise performed at least once or twice per week. The most popular types of incentive were exercise during working hours and a wellness allowance rather than coupons for sports goods. The results show that the relative value of some attribute levels differed between young adults (age ≤ 44 years) and older adults (age ≥ 45 years) in terms of the level of trainer supervision required, exercise intensity, travel time to exercise location and financial incentives. For active study participants, exercise frequency (i.e., twice per week, 1.15; CI: 0.25; 2.06) influenced choice of exercise. For individuals with more than one child, travel time (i.e., 20 minutes, -0.55; CI: 0.65; 3.26) was also an influential attribute for choice of exercise, showing that people with children at home preferred to exercise close to home. Conclusions This study adds to our knowledge about what types of exercise working adults with back pain are most likely to participate in. The exercise should be a cardiovascular type of training carried out in a group with trainer supervision. It should also be of high intensity and preferably performed twice per week during working hours. Coupons for sports goods do not appear to motivate physical activity among workers with LBP. The findings of the study could have a substantial impact on the planning and development of exercise provision and promotion strategies to improve non-specific LBP. Providers and employers may be able to improve participation in exercise programs for adults with non-specific LBP by focusing on the exercise components which are the most attractive. This in turn would improve satisfaction and adherence to exercise interventions aimed at preventing recurrent non-specific LBP. PMID:29244841

Individual preferences for physical exercise as secondary prevention for non-specific low back pain: A discrete choice experiment.

PubMed

Aboagye, Emmanuel; Hagberg, Jan; Axén, Iben; Kwak, Lydia; Lohela-Karlsson, Malin; Skillgate, Eva; Dahlgren, Gunilla; Jensen, Irene

2017-01-01

Exercise is effective in improving non-specific low back pain (LBP). Certain components of physical exercise, such as the type, intensity and frequency of exercise, are likely to influence participation among working adults with non-specific LBP, but the value and relative importance of these components remain unknown. The study's aim was to examine such specific components and their influence on individual preferences for exercise for secondary prevention of non-specific LBP among working adults. In a discrete choice experiment, working individuals with non-specific LBP answered a web-based questionnaire. Each respondent was given ten pairs of hypothetical exercise programs and asked to choose one option from each pair. The choices comprised six attributes of exercise (i.e., type of training, design, intensity, frequency, proximity and incentives), each with either three or four levels. A conditional logit regression that reflected the random utility model was used to analyze the responses. The final study population consisted of 112 participants. The participants' preferred exercise option was aerobic (i.e., cardiovascular) rather than strength training, group exercise with trainer supervision, rather than individual or unsupervised exercise. They also preferred high intensity exercise performed at least once or twice per week. The most popular types of incentive were exercise during working hours and a wellness allowance rather than coupons for sports goods. The results show that the relative value of some attribute levels differed between young adults (age ≤ 44 years) and older adults (age ≥ 45 years) in terms of the level of trainer supervision required, exercise intensity, travel time to exercise location and financial incentives. For active study participants, exercise frequency (i.e., twice per week, 1.15; CI: 0.25; 2.06) influenced choice of exercise. For individuals with more than one child, travel time (i.e., 20 minutes, -0.55; CI: 0.65; 3.26) was also an influential attribute for choice of exercise, showing that people with children at home preferred to exercise close to home. This study adds to our knowledge about what types of exercise working adults with back pain are most likely to participate in. The exercise should be a cardiovascular type of training carried out in a group with trainer supervision. It should also be of high intensity and preferably performed twice per week during working hours. Coupons for sports goods do not appear to motivate physical activity among workers with LBP. The findings of the study could have a substantial impact on the planning and development of exercise provision and promotion strategies to improve non-specific LBP. Providers and employers may be able to improve participation in exercise programs for adults with non-specific LBP by focusing on the exercise components which are the most attractive. This in turn would improve satisfaction and adherence to exercise interventions aimed at preventing recurrent non-specific LBP.

PLSS 2.5 Fan Design and Development

NASA Technical Reports Server (NTRS)

Quinn, Gregory; Carra, Michael; Converse, David; Chullen, Cinda

2015-01-01

NASA is building a high fidelity prototype of an advanced portable life support system (PLSS) as part of the Advanced Exploration Systems Program. This new PLSS, designated as PLSS 2.5, will advance component technologies and systems knowledge in order to inform a future flight program. The oxygen ventilation loop of its predecessor, PLSS 2.0, is driven by a centrifugal fan developed using specifications from the Constellation Program. PLSS technology and system parameters have matured to the point where the existing fan will not perform adequately for the new prototype. In addition, areas of potential improvement have been identified with the existing fan that could be addressed in a new design. As a result, a new fan was designed and tested for the PLSS 2.5.

APSIC Guidelines for environmental cleaning and decontamination.

PubMed

Ling, Moi Lin; Apisarnthanarak, Anucha; Thu, Le Thi Anh; Villanueva, Victoria; Pandjaitan, Costy; Yusof, Mohamad Yasim

2015-01-01

This document is an executive summary of APSIC Guidelines for Environmental Cleaning and Decontamination. It describes best practices in routine cleaning and decontamination in healthcare facilities as well as in specific settings e.g. management of patients with isolation precautions, food preparation areas, construction and renovation, and following a flood. It recommends the implementation of environmental hygiene program to keep the environment safe for patients, staff and visitors visiting a healthcare facility. Objective assessment of cleanliness and quality is an essential component of this program as a method for identifying quality improvement opportunities. Recommendations for safe handling of linen and bedding; as well as occupational health and safety issues are included in the guidelines. A training program is vital to ensure consistent adherence to best practices.

Development of the volunteer peer educator role in a community Cardiovascular Health Awareness Program (CHAP): a process evaluation in two communities.

PubMed

Karwalajtys, Tina; McDonough, Beatrice; Hall, Heather; Guirguis-Younger, Manal; Chambers, Larry W; Kaczorowski, Janusz; Lohfeld, Lynne; Hutchison, Brian

2009-08-01

Volunteers can support the delivery and sustainability of programs promoting chronic disease awareness to improve health at the community level. This paper describes the development of the peer education component of the Cardiovascular Health Awareness Program (CHAP) and assessment of the volunteer peer educator role in a community-wide demonstration project in two mid-sized Ontario communities. A case study approach was used incorporating process learning, a volunteer survey and debriefing discussions with volunteers. A post-program questionnaire was administered to 48 volunteers. Five debriefing discussions were conducted with 27 volunteers using a semi-structured interview guide. Discussions were audio-recorded and transcribed. Analysis used an editing approach to identify themes, taking into account the community-specific context. Volunteers reported an overall positive experience and identified rewarding aspects of their involvement. They felt well prepared but appreciated ongoing training and support and requested more refresher training. Understanding of program objectives increased volunteer satisfaction. Volunteers continued to develop their role during the program; however, organizational and logistical factors sometimes limited skill acquisition and contributions. The prospect of greater involvement in providing tailored health education resources addressing modifiable risk factors was acceptable to most volunteers. Continued refinement of strategies to recruit, train, retain and support volunteers strengthened the peer education component of CHAP. The experience and contributions of volunteers were influenced by the wider context of program delivery. Process evaluation allowed program planners to anticipate challenges, strengthen support for volunteer activities, and expand the peer educator role. This learning can inform similar peer-led health promotion initiatives.

A National Survey of Tobacco Cessation Programs for Youths

PubMed Central

Curry, Susan J.; Emery, Sherry; Sporer, Amy K.; Mermelstein, Robin; Flay, Brian R.; Berbaum, Michael; Warnecke, Richard B.; Johnson, Timothy; Mowery, Paul; Parsons, Jennifer; Harmon, Lori; Hund, Lisa; Wells, Henry

2007-01-01

Objectives. We collected data on a national sample of existing community-based tobacco cessation programs for youths to understand their prevalence and overall characteristics. Methods. We employed a 2-stage sampling design with US counties as the first-stage probability sampling units. We then used snowball sampling in selected counties to identify administrators of tobacco cessation programs for youths. We collected data on cessation programs when programs were identified. Results. We profiled 591 programs in 408 counties. Programs were more numerous in urban counties; fewer programs were found in low-income counties. State-level measures of smoking prevalence and tobacco control expenditures were not associated with program availability. Most programs were multisession, school-based group programs serving 50 or fewer youths per year. Program content included cognitive-behavioral components found in adult programs along with content specific to adolescence. The median annual budget was $2000. Few programs (9%) reported only mandatory enrollment, 35% reported mixed mandatory and voluntary enrollment, and 56% reported only voluntary enrollment. Conclusions. There is considerable homogeneity among community-based tobacco cessation programs for youths. Programs are least prevalent in the types of communities for which national data show increases in youths’ smoking prevalence. PMID:17138932

Primary prevention of cannabis use: a systematic review of randomized controlled trials.

PubMed

Norberg, Melissa M; Kezelman, Sarah; Lim-Howe, Nicholas

2013-01-01

A systematic review of primary prevention was conducted for cannabis use outcomes in youth and young adults. The aim of the review was to develop a comprehensive understanding of prevention programming by assessing universal, targeted, uni-modal, and multi-modal approaches as well as individual program characteristics. Twenty-eight articles, representing 25 unique studies, identified from eight electronic databases (EMBASE, MEDLINE, CINAHL, ERIC, PsycINFO, DRUG, EBM Reviews, and Project CORK), were eligible for inclusion. Results indicated that primary prevention programs can be effective in reducing cannabis use in youth populations, with statistically significant effect sizes ranging from trivial (0.07) to extremely large (5.26), with the majority of significant effect sizes being trivial to small. Given that the preponderance of significant effect sizes were trivial to small and that percentages of statistically significant and non-statistically significant findings were often equivalent across program type and individual components, the effectiveness of primary prevention for cannabis use should be interpreted with caution. Universal multi-modal programs appeared to outperform other program types (i.e, universal uni-modal, targeted multi-modal, targeted unimodal). Specifically, universal multi-modal programs that targeted early adolescents (10-13 year olds), utilised non-teacher or multiple facilitators, were short in duration (10 sessions or less), and implemented boosters sessions were associated with large median effect sizes. While there were studies in these areas that contradicted these results, the results highlight the importance of assessing the interdependent relationship of program components and program types. Finally, results indicated that the overall quality of included studies was poor, with an average quality rating of 4.64 out of 9. Thus, further quality research and reporting and the development of new innovative programs are required.

Primary Prevention of Cannabis Use: A Systematic Review of Randomized Controlled Trials

PubMed Central

Norberg, Melissa M.; Kezelman, Sarah; Lim-Howe, Nicholas

2013-01-01

A systematic review of primary prevention was conducted for cannabis use outcomes in youth and young adults. The aim of the review was to develop a comprehensive understanding of prevention programming by assessing universal, targeted, uni-modal, and multi-modal approaches as well as individual program characteristics. Twenty-eight articles, representing 25 unique studies, identified from eight electronic databases (EMBASE, MEDLINE, CINAHL, ERIC, PsycINFO, DRUG, EBM Reviews, and Project CORK), were eligible for inclusion. Results indicated that primary prevention programs can be effective in reducing cannabis use in youth populations, with statistically significant effect sizes ranging from trivial (0.07) to extremely large (5.26), with the majority of significant effect sizes being trivial to small. Given that the preponderance of significant effect sizes were trivial to small and that percentages of statistically significant and non-statistically significant findings were often equivalent across program type and individual components, the effectiveness of primary prevention for cannabis use should be interpreted with caution. Universal multi-modal programs appeared to outperform other program types (i.e, universal uni-modal, targeted multi-modal, targeted unimodal). Specifically, universal multi-modal programs that targeted early adolescents (10–13 year olds), utilised non-teacher or multiple facilitators, were short in duration (10 sessions or less), and implemented boosters sessions were associated with large median effect sizes. While there were studies in these areas that contradicted these results, the results highlight the importance of assessing the interdependent relationship of program components and program types. Finally, results indicated that the overall quality of included studies was poor, with an average quality rating of 4.64 out of 9. Thus, further quality research and reporting and the development of new innovative programs are required. PMID:23326396

Discovery and Broad Relevance May Be Insignificant Components of Course-Based Undergraduate Research Experiences (CUREs) for Non-Biology Majors.

PubMed

Ballen, Cissy J; Thompson, Seth K; Blum, Jessamina E; Newstrom, Nicholas P; Cotner, Sehoya

2018-01-01

Course-based undergraduate research experiences (CUREs) are a type of laboratory learning environment associated with a science course, in which undergraduates participate in novel research. According to Auchincloss et al. (CBE Life Sci Educ 2104; 13:29-40), CUREs are distinct from other laboratory learning environments because they possess five core design components, and while national calls to improve STEM education have led to an increase in CURE programs nationally, less work has specifically focused on which core components are critical to achieving desired student outcomes. Here we use a backward elimination experimental design to test the importance of two CURE components for a population of non-biology majors: the experience of discovery and the production of data broadly relevant to the scientific or local community. We found nonsignificant impacts of either laboratory component on students' academic performance, science self-efficacy, sense of project ownership, and perceived value of the laboratory experience. Our results challenge the assumption that all core components of CUREs are essential to achieve positive student outcomes when applied at scale.

A PC program for estimating measurement uncertainty for aeronautics test instrumentation

NASA Technical Reports Server (NTRS)

Blumenthal, Philip Z.

1995-01-01

A personal computer program was developed which provides aeronautics and operations engineers at Lewis Research Center with a uniform method to quickly provide values for the uncertainty in test measurements and research results. The software package used for performing the calculations is Mathcad 4.0, a Windows version of a program which provides an interactive user interface for entering values directly into equations with immediate display of results. The error contribution from each component of the system is identified individually in terms of the parameter measured. The final result is given in common units, SI units, and percent of full scale range. The program also lists the specifications for all instrumentation and calibration equipment used for the analysis. It provides a presentation-quality printed output which can be used directly for reports and documents.

A program for advancing the technology of space concentrators

NASA Technical Reports Server (NTRS)

Naujokas, Gerald J.; Savino, Joseph M.

1989-01-01

In 1985, the NASA Lewis Research Center formed a project, the Advanced Solar Dynamics Power Systems Project, for the purpose of advancing the technology of Solar Dynamic Power Systems for space applications beyond 2000. Since then, technology development activities have been initiated for the major components and subsystems such as the concentrator, heat receiver and engine, and radiator. Described here is a program for developing long lived (10 years or more), lighter weight, and more reflective space solar concentrators than is presently possible. The program is progressing along two parallel paths: one is concentrator concept development and the other is the resolution of those critical technology issues that will lead to durable, highly specular, and lightweight reflector elements. Outlined are the specific objectives, long-term goals, approach, planned accomplishments for the future, and the present status of the various program elements.

A program for advancing the technology of space concentrators

NASA Technical Reports Server (NTRS)

Naujokas, Gerald J.; Savino, Joseph M.

1989-01-01

In 1985, the NASA Lewis Research Center formed a project, the Advanced Solar Dynamics Power Systems Project, for the purpose of advancing the technology of Solar Dynamic Power Systems for space applications beyond 2000. Since then, technology development activities have been initiated for the major components and subsystems such as the concentrator, heat receiver and engine, and radiator. Described here is a program for developing long lived (10 years or more), lighter weight, and more reflective space solar concentrators than is presently possible. The program is progressing along two parallel paths: one is concentrator concept development and the other is the resolution of those critical technology issues that will lead to durable, highly specular, and lightweight reflector elements. Outlined are the specific objectives, long term goals, approach, planned accomplishments for the future, and the present status of the various program elements.

User Interface Technology for Formal Specification Development

NASA Technical Reports Server (NTRS)

Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Lum, Henry, Jr. (Technical Monitor)

1994-01-01

Formal specification development and modification are an essential component of the knowledge-based software life cycle. User interface technology is needed to empower end-users to create their own formal specifications. This paper describes the advanced user interface for AMPHION1 a knowledge-based software engineering system that targets scientific subroutine libraries. AMPHION is a generic, domain-independent architecture that is specialized to an application domain through a declarative domain theory. Formal specification development and reuse is made accessible to end-users through an intuitive graphical interface that provides semantic guidance in creating diagrams denoting formal specifications in an application domain. The diagrams also serve to document the specifications. Automatic deductive program synthesis ensures that end-user specifications are correctly implemented. The tables that drive AMPHION's user interface are automatically compiled from a domain theory; portions of the interface can be customized by the end-user. The user interface facilitates formal specification development by hiding syntactic details, such as logical notation. It also turns some of the barriers for end-user specification development associated with strongly typed formal languages into active sources of guidance, without restricting advanced users. The interface is especially suited for specification modification. AMPHION has been applied to the domain of solar system kinematics through the development of a declarative domain theory. Testing over six months with planetary scientists indicates that AMPHION's interactive specification acquisition paradigm enables users to develop, modify, and reuse specifications at least an order of magnitude more rapidly than manual program development.

Management of Microcircuit Obsolescence in a Pre-Production ACAT-ID Missile Program

DTIC Science & Technology

2002-12-01

and Engineering Center ASIC Application Specific Integrated Circuit AVCOM Avionics Component Obsolescence Management BRU Battery Replaceable Unit...then just a paper qualification, e.g. Board or Battery Replaceable Unit ( BRU ) testing. 5 After-market Package The Die is Available and Can Be...Encapsulated Microcircuits (PEM), speed change, failure rate) 8 Emulation Manufacture or re-engineering of a FFF Replacement 9 CCA or BRU Redesign Board

Program for establishing long time flight service performance of composite materials in the central wing structure of C-130 aircraft. Phase 2: Detailed design

NASA Technical Reports Server (NTRS)

Harvill, W. E.; Duhig, J. J.; Spencer, B. R.

1973-01-01

The design, fabrication, and evaluation of boron-epoxy reinforced C-130 center wing boxes are discussed. Design drawings, static strength, fatigue endurance, flutter, and weight analyses required for the wing box fabrication are presented. Additional component testing to verify the design for panel buckling and to evaluate specific local design areas are reported.

Near hybrid passenger vehicle development program, phase 1. Appendices C and D, Volume 2

NASA Technical Reports Server (NTRS)

1979-01-01

Results of tradeoff studies are presented in summary form. Various aspects of the overall vehicle design discussed include selection of the base vehicle, the battery pack configuration, structural modifications, occupant protection, vehicle dynamics, and aerodynamics. The drivetrain design and integration, power conditioning unit, battery subsystem, control system, environmental system are described. Specifications, weight breakdown, and energy consumption measures, and advanced technology components are included.

Development and content validity of the CENA Program for Educational Training on the Neuropsychology of Learning, with an emphasis on executive functions and attention.

PubMed

Pureza, Janice R; Fonseca, Rochele P

2017-01-01

The importance of executive functions (EF) in childhood development, and their role as indicators of health, well-being, professional and academic success have been demonstrated by several studies in the literature. FE are cognitive processes that aim to control and manage behavior to achieve specific goal and included skills planning, inhibition, cognitive flexibility, (executive) attention and the central executive component of working memory (WM). In the context of education, the EF are crucial for continued learning and efficient academic performance due to their involvement in several components of the educational process. The aim of this article was to describe the development and content validity of the CENA Program for Educational Training on the Neuropsychology of Learning, with an emphasis on executive functions and attention. The study involved seven specialists (four responsible for evaluating the program, and three involved in brainstorming), and was carried out in three stages:Background research: neuropsychology and education;Program development - author brainstorming andEvaluation by expert judges The goals, language and methods. CENA Program were considered adequate, attesting to its content validity as a school-based neuropsychological intervention. Teacher training in school neuropsychology may be an important area for future investment and contribute to academic achievement and student development in the Brazilian education system.

Development and content validity of the CENA Program for Educational Training on the Neuropsychology of Learning, with an emphasis on executive functions and attention

PubMed Central

Pureza, Janice R.; Fonseca, Rochele P.

2017-01-01

Introduction The importance of executive functions (EF) in childhood development, and their role as indicators of health, well-being, professional and academic success have been demonstrated by several studies in the literature. FE are cognitive processes that aim to control and manage behavior to achieve specific goal and included skills planning, inhibition, cognitive flexibility, (executive) attention and the central executive component of working memory (WM). In the context of education, the EF are crucial for continued learning and efficient academic performance due to their involvement in several components of the educational process. Objective The aim of this article was to describe the development and content validity of the CENA Program for Educational Training on the Neuropsychology of Learning, with an emphasis on executive functions and attention. Methods The study involved seven specialists (four responsible for evaluating the program, and three involved in brainstorming), and was carried out in three stages: Background research: neuropsychology and education; Program development - author brainstorming and Evaluation by expert judges The goals, language and methods. Results CENA Program were considered adequate, attesting to its content validity as a school-based neuropsychological intervention. Conclusion Teacher training in school neuropsychology may be an important area for future investment and contribute to academic achievement and student development in the Brazilian education system. PMID:29213497

Professional Medical Library Education in the United States in Relation to the Qualifications of Medical Library Manpower in Ohio *

PubMed Central

Rees, Alan M.; Rothenberg, Lesliebeth; Denison, Barbara

1968-01-01

The present system of education for medical library practice in the United States consists of four major components: graduate degree programs in library science with specialization in medical librarianship; graduate degree programs in library science with no such specialization; postgraduate internships in medical libraries; continuing education programs. Data are presented illustrating the flow of graduates along these several educational pathways into medical library practice. The relevance of these educational components to the current medical library work force is discussed with reference to manpower data compiled for Ohio. The total number of medical library personnel in Ohio in 1968 is 316. Of this total, only forty-two (approximately 14 percent) have received any formal library training. Seventy persons have only a high school education. From these figures, it is concluded that there is no standard or essential qualification which is universally accepted as educational preparation for work in medical libraries; that the comparative sophistication of the educational programs in medical librarianship has yet to be reflected widely in general medical library practice; that an increasingly large number of non-professional or ancillary personnel are being, and will continue to be, utilized in medical libraries; that large numbers of untrained persons have sole responsibility for medical libraries; and that appropriate educational programs will have to be designed specifically for this type of personnel. PMID:5702318

Steam Turbine Materials for Ultrasupercritical Coal Power Plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Viswanathan, R.; Hawk, J.; Schwant, R.

The Ultrasupercritical (USC) Steam Turbine Materials Development Program is sponsored and funded by the U.S. Department of Energy and the Ohio Coal Development Office, through grants to Energy Industries of Ohio (EIO), a non-profit organization contracted to manage and direct the project. The program is co-funded by the General Electric Company, Alstom Power, Siemens Power Generation (formerly Siemens Westinghouse), and the Electric Power Research Institute, each organization having subcontracted with EIO and contributing teams of personnel to perform the requisite research. The program is focused on identifying, evaluating, and qualifying advanced alloys for utilization in coal-fired power plants that needmore » to withstand steam turbine operating conditions up to 760°C (1400°F) and 35 MPa (5000 psi). For these conditions, components exposed to the highest temperatures and stresses will need to be constructed from nickel-based alloys with higher elevated temperature strength than the highchromium ferritic steels currently used in today's high-temperature steam turbines. In addition to the strength requirements, these alloys must also be weldable and resistant to environmental effects such as steam oxidation and solid particle erosion. In the present project, candidate materials with the required creep strength at desired temperatures have been identified. Coatings that can resist oxidation and solid particle erosion have also been identified. The ability to perform dissimilar welds between nickel base alloys and ferritic steels have been demonstrated, and the properties of the welds have been evaluated. Results of this three-year study that was completed in 2009 are described in this final report. Additional work is being planned and will commence in 2009. The specific objectives of the future studies will include conducting more detailed evaluations of the weld-ability, mechanical properties and repair-ability of the selected candidate alloys for rotors, casings and valves, and to perform scale-up studies to establish a design basis for commercial scale components. A supplemental program funded by the Ohio Coal Development Office will undertake supporting tasks such as testing and trials using existing atmospheric, vacuum and developmental pressure furnaces to define specific metal casting techniques needed for producing commercial scale components.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

R.A. Wigeland

Abstract: The proposed Global Nuclear Energy Partnership (GNEP) Program, which is part of the President’s Advanced Energy Initiative, is intended to support a safe, secure, and sustainable expansion of nuclear energy, both domestically and internationally. Domestically, the GNEP Program would promote technologies that support economic, sustained production of nuclear-generated electricity, while reducing the impacts associated with spent nuclear fuel disposal and reducing proliferation risks. The Department of Energy (DOE) proposed action envisions changing the United States nuclear energy fuel cycle from an open (or once-through) fuel cycle—in which nuclear fuel is used in a power plant one time and themore » resulting spent nuclear fuel is stored for eventual disposal in a geologic repository—to a closed fuel cycle in which spent nuclear fuel would be recycled to recover energy-bearing components for use in new nuclear fuel. At this time, DOE has no specific proposed actions for the international component of the GNEP Program. Rather, the United States, through the GNEP Program, is considering various initiatives to work cooperatively with other nations. Such initiatives include the development of grid-appropriate reactors and the development of reliable fuel services (to provide an assured supply of fresh nuclear fuel and assist with the management of the used fuel) for nations who agree to employ nuclear energy only for peaceful purposes, such as electricity generation.« less

The combination of two training approaches to improve older adults' driving safety.

PubMed

Bédard, Michel; Porter, Michelle M; Marshall, Shawn; Isherwood, Ivy; Riendeau, Julie; Weaver, Bruce; Tuokko, Holly; Molnar, Frank; Miller-Polgar, Jan

2008-03-01

An increasing number of older adults rely on the automobile for transportation. Educational approaches based on the specific needs of older drivers may help to optimize safe driving. We examined if the combination of an in-class education program with on-road education would lead to improvements in older drivers' knowledge of safe driving practices and on-road driving evaluations. We used a multisite, randomized controlled trial approach. Participants in the intervention group received the in-class and on-road education; those in the control group waited and were offered the education afterwards. We measured knowledge of safe driving practices before and after the in-class component of the program and on-road driving skills before and after the whole program. Participants' knowledge improved from 61% of correct answers before the in-class education component to 81% after (p < .001). The on-road evaluation results suggested improvements on some aspects of safe driving (e.g., moving in roadway, p < .05) but not on others. The results of this study demonstrate that education programs focused on the needs of older drivers may help improve their knowledge of safe driving practices and actual driving performance. Further research is required to determine if these changes will affect other variables such as driver confidence and crash rates.

The Practice Profile: An All Purpose Tool for Program Communication, Staff Development, Evaluation and Improvement.

ERIC Educational Resources Information Center

Loucks, Susan F.; Crandall, David P.

The practice profile is a standardized, systematic, cost-effective tool for summarizing the components and requirements of a program in a manner that permits comparison with other programs or selection of discrete components from various programs. It provides a component checklist, a precise list of implementation requirements, and a system for…

Components of effective randomized controlled trials of hydrotherapy programs for fibromyalgia syndrome: A systematic review.

PubMed

Perraton, Luke; Machotka, Zuzana; Kumar, Saravana

2009-11-30

Previous systematic reviews have found hydrotherapy to be an effective management strategy for fibromyalgia syndrome (FMS). The aim of this systematic review was to summarize the components of hydrotherapy programs used in randomized controlled trials. A systematic review of randomized controlled trials was conducted. Only trials that have reported significant FMS-related outcomes were included. Data relating to the components of hydrotherapy programs (exercise type, duration, frequency and intensity, environmental factors, and service delivery) were analyzed. Eleven randomized controlled trials were included in this review. Overall, the quality of trials was good. Aerobic exercise featured in all 11 trials and the majority of hydrotherapy programs included either a strengthening or flexibility component. Great variability was noted in both the environmental components of hydrotherapy programs and service delivery. Aerobic exercise, warm up and cool-down periods and relaxation exercises are common features of hydrotherapy programs that report significant FMS-related outcomes. Treatment duration of 60 minutes, frequency of three sessions per week and an intensity equivalent to 60%-80% maximum heart rate were the most commonly reported exercise components. Exercise appears to be the most important component of an effective hydrotherapy program for FMS, particularly when considering mental health-related outcomes.

Evidence-based psychosocial treatments for child and adolescent depression.

PubMed

David-Ferdon, Corinne; Kaslow, Nadine J

2008-01-01

The evidence-base of psychosocial treatment outcome studies for depressed youth conducted since 1998 is examined. All studies for depressed children meet Nathan and Gorman's (2002) criteria for Type 2 studies whereas the adolescent protocols meet criteria for both Type 1 and Type 2 studies. Based on the Task Force on the Promotion and Dissemination of Psychological Procedures guidelines, the cognitive-behavioral therapy (CBT) based specific programs of Penn Prevention Program, Self-Control Therapy, and Coping with Depression-Adolescent are probably efficacious. Interpersonal Therapy-Adolescent, which falls under the theoretical category of interpersonal therapy (IPT), also is a probably efficacious treatment. CBT provided through the modalities of child group only and child group plus parent components are well-established intervention approaches for depressed children. For adolescents, two modalities are well-established (CBT adolescent only group, IPT individual), and three are probably efficacious (CBT adolescent group plus parent component, CBT individual, CBT individual plus parent/family component). From the broad theoretical level, CBT has well-established efficacy and behavior therapy meets criteria for a probably efficacious intervention for childhood depression. For adolescent depression, both CBT and IPT have well-established efficacy. Future research directions and best practices are offered.

Maternal MEMI Promotes Female Meiosis II in Response to Fertilization in Caenorhabditis elegans

PubMed Central

Ataeian, Maryam; Tegha-Dunghu, Justus; Curtis, Donna G.; Sykes, Ellen M. E.; Nozohourmehrabad, Ashkan; Bajaj, Megha; Cheung, Karen; Srayko, Martin

2016-01-01

In most animals, female meiosis completes only after fertilization. Sperm entry has been implicated in providing a signal for the initiation of the final meiotic processes; however, a maternal component required for this process has not been previously identified. We report the characterization of a novel family of three highly similar paralogs (memi-1, memi-2, memi-3) that encode oocyte-specific proteins. A hyper-morphic mutation memi-1(sb41) results in failure to exit female meiosis II properly; however, loss of all three paralogs results in a “skipped meiosis II” phenotype. Mutations that prevent fertilization, such as fer-1(hc1), also cause a skipped meiosis II phenotype, suggesting that the MEMI proteins represent a maternal component of a postfertilization signal that specifies the meiosis II program. MEMI proteins are degraded before mitosis and sensitive to ZYG-11, a substrate-specific adapter for cullin-based ubiquitin ligase activity, and the memi-1(sb41) mutation results in inappropriate persistence of the MEMI-1 protein into mitosis. Using an RNAi screen for suppressors of memi-1(sb41), we identified a sperm-specific PP1 phosphatase, GSP-3/4, as a putative sperm component of the MEMI pathway. We also found that MEMI and GSP-3/4 proteins can physically interact via co-immunoprecipitation. These results suggest that sperm-specific PP1 and maternal MEMI proteins act in the same pathway after fertilization to facilitate proper meiosis II and the transition into embryonic mitosis. PMID:27729423

Millennial and Non-Millennial Agriculture Teachers' Current and Ideal Emphasis on the Three Components of the Agricultural Education Program

ERIC Educational Resources Information Center

Shoulders, Catherine W.; Toland, Hannah

2017-01-01

Classroom and laboratory instruction, FFA, and SAE have long represented the complete agricultural education program via the three-component model. While the model depicts three circles of equal size to represent these components, the focus and level of emphasis of each component within the agriculture program is the decision of the agriculture…

Refining technology for the recycling of stainless steel radioactive scrap metals, FY 94 bi-annual report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mizia, R.E.; Atteridge, D.G.; Buckentin, J.

1994-08-01

The research addressed under this project is the recycling of metallic nuclear-related by-product materials under the direction of Westinghouse Idaho Nuclear Company (WINCO). The program addresses the recycling of radioactive scrap metals (RSM) for beneficial re-use within the DOE complex; in particular, this program addresses the recycling of stainless steel RSM. It is anticipated that various stainless steel components under WINCO control at the Idaho Falls Engineering Laboratory (INEL), such as fuel pool criticality barriers and fuel storage racks will begin to be recycled in FY94-95. The end product of this recycling effort is expected to be waste and overpackmore » canisters for densified high level waste for the Idaho Waste Immobilization Facility and/or the Universal Canister System for dry (interim) storage of spent fuel. The specific components of this problem area that are presently being, or have been, addressed by CAAMSEC are: (1) the melting/remelting of stainless steel RSM into billet form; (2) the melting/remelting initial research focus will be on the use of radioactive surrogates to study; (3) the cost effectiveness of RSM processing oriented towards privatization of RSM reuse and/or resale. Other components of this problem that may be addressed under program extension are: (4) the melting/remelting of carbon steel; (5) the processing of billet material into product form which shall meet all applicable ASTM requirements; and, (6) the fabrication of an actual prototypical product; the present concept of an end product is a low carbon Type 304/316 stainless steel cylindrical container for densified and/or vitrified high level radioactive waste and/or the Universal Canister System for dry (interim) storage of spent fuel. The specific work reported herein covers the melting/remelting of stainless steel {open_quotes}scrap{close_quotes} metal into billet form and the study of surrogate material removal effectiveness by various remelting techniques.« less

Ceramic applications in turbine engines

NASA Technical Reports Server (NTRS)

Helms, H. E.; Heitman, P. W.; Lindgren, L. C.; Thrasher, S. R.

1984-01-01

The application of ceramic components to demonstrate improved cycle efficiency by raising the operating temperature of the existing Allison IGI 404 vehicular gas turbine engine is discussed. This effort was called the Ceramic Applications in Turbine Engines (CATE) program and has successfully demonstrated ceramic components. Among these components are two design configurations featuring stationary and rotating caramic components in the IGT 404 engine. A complete discussion of all phases of the program, design, materials development, fabrication of ceramic components, and testing-including rig, engine, and vehicle demonstation test are presented. During the CATE program, a ceramic technology base was established that is now being applied to automotive and other gas turbine engine programs. This technology base is outlined and also provides a description of the CATE program accomplishments.

Environmental analysis for development planning in Chambers County, Texas, land use policy component, interim summary of federal influence over land use

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mixon, J.

1973-11-21

This summary covers major Federal programs that affect land use and indicates some of the influence which these programs may have on Chambers County, Texas. The first part is divided into specific areas of study and includes the history of Federal assistance programs to date. These areas are housing and urban development, the Rural Development Act of 1972, transportation, mass transit, energy, air pollution controls, the National Environmental Policy Act of 1969; power plant siting, the Environmental Protection Agency (EPA), Coastal Zone Management (CZM), the National Land Use Policy (NLUP) and Planning Assistance Act, and the interrelation of EPA, CZM,more » and NLUP. The second part deals with constitutional power in relation to transportation, housing and slum clearance, urban renewal, Federal assistance for new communities and open space acquisition, the Rural Development Act of 1972, the EPA, CZM, NLUP and Planning Assistance Act, and power plant siting bills. Included are the legislative history of these land use acts and their actual terminology, control and enforcement procedures and research and developing funding. Specific references to Texas, and especially Chambers County, in relation to these programs are made throughout the report.« less

Using intervention mapping to deconstruct cognitive work hardening: a return-to-work intervention for people with depression.

PubMed

Wisenthal, Adeena; Krupa, Terry

2014-12-12

Mental health related work disability leaves are increasing at alarming rates with depression emerging as the most common mental disorder in the workforce. Treatments are available to alleviate depressive symptoms and associated functional impacts; however, they are not specifically aimed at preparing people to return to work. Cognitive work hardening (CWH) is a novel intervention that addresses this gap in the health care system. This paper presents a theoretical analysis of the components and underlying mechanisms of CWH using Intervention Mapping (IM) as a tool to deconstruct its elements. The cognitive sequelae of depression and their relevance to return-to-work (RTW) are examined together with interpersonal skills and other work-related competencies that affect work ability. IM, a tool typically used to create programs, is used to deconstruct an existing program, namely CWH, into its component parts and link them to theories and models in the literature. CWH has been deconstructed into intervention elements which are linked to program performance objectives through underlying theoretical models. In this way, linkages are made between tools and materials of the intervention and the overall program objective of 'successful RTW for people with depression'. An empirical study of the efficacy of CWH is currently underway which should provide added insight and understanding into this intervention. The application of IM to CWH illustrates the theoretical underpinnings of the treatment intervention and assists with better understanding the linkage between intervention elements and intervention objective. Applying IM to deconstruct an existing program (rather than create a program) presents an alternate application of the IM tool which can have implications for other programs in terms of enhancing understanding, grounding in theoretical foundations, communicating program design, and establishing a basis for program evaluation and improvement.

Structure and Functions of Pediatric Aerodigestive Programs: A Consensus Statement.

PubMed

Boesch, R Paul; Balakrishnan, Karthik; Acra, Sari; Benscoter, Dan T; Cofer, Shelagh A; Collaco, Joseph M; Dahl, John P; Daines, Cori L; DeAlarcon, Alessandro; DeBoer, Emily M; Deterding, Robin R; Friedlander, Joel A; Gold, Benjamin D; Grothe, Rayna M; Hart, Catherine K; Kazachkov, Mikhail; Lefton-Greif, Maureen A; Miller, Claire Kane; Moore, Paul E; Pentiuk, Scott; Peterson-Carmichael, Stacey; Piccione, Joseph; Prager, Jeremy D; Putnam, Philip E; Rosen, Rachel; Rutter, Michael J; Ryan, Matthew J; Skinner, Margaret L; Torres-Silva, Cherie; Wootten, Christopher T; Zur, Karen B; Cotton, Robin T; Wood, Robert E

2018-02-07

Aerodigestive programs provide coordinated interdisciplinary care to pediatric patients with complex congenital or acquired conditions affecting breathing, swallowing, and growth. Although there has been a proliferation of programs, as well as national meetings, interest groups and early research activity, there is, as of yet, no consensus definition of an aerodigestive patient, standardized structure, and functions of an aerodigestive program or a blueprint for research prioritization. The Delphi method was used by a multidisciplinary and multi-institutional panel of aerodigestive providers to obtain consensus on 4 broad content areas related to aerodigestive care: (1) definition of an aerodigestive patient, (2) essential construct and functions of an aerodigestive program, (3) identification of aerodigestive research priorities, and (4) evaluation and recognition of aerodigestive programs and future directions. After 3 iterations of survey, consensus was obtained by either a supermajority of 75% or stability in median ranking on 33 of 36 items. This included a standard definition of an aerodigestive patient, level of participation of specific pediatric disciplines in a program, essential components of the care cycle and functions of the program, feeding and swallowing assessment and therapy, procedural scope and volume, research priorities and outcome measures, certification, coding, and funding. We propose the first consensus definition of the aerodigestive care model with specific recommendations regarding associated personnel, infrastructure, research, and outcome measures. We hope that this may provide an initial framework to further standardize care, develop clinical guidelines, and improve outcomes for aerodigestive patients. Copyright © 2018 by the American Academy of Pediatrics.

The United States earth resources survey program and ERTS experiments benefit highlights

NASA Technical Reports Server (NTRS)

Jaffe, L.

1974-01-01

With the launch of the first Earth Resources Technology Satellite in July 1972 a major new tool has become available for decision making in the assessment, exploitation, and management of the earth's resources on a national and international basis. The current status of the earth resources survey program is discussed and the future potential is reviewed. The supportive roles of all stages of the system, including surface, aircraft, and satellite components are noted. Specific cases of application of ERTS data are presented together with a discussion of benefits that might accrue. Need for cooperative, coordinated efforts between participants is emphasized.

Environmental tobacco smoke exposure among casino dealers.

PubMed

Achutan, Chandran; West, Christine; Mueller, Charles; Bernert, John T; Bernard, Bruce

2011-04-01

This study quantified casino dealers' occupational exposure to environmental tobacco smoke (ETS). We measured casino dealers' exposure to ETS components by analyzing full-shift air and preshift and postshift urine samples. Casino dealers were exposed to nicotine, 4-vinyl pyridine, benzene, toluene, naphthalene, formaldehyde, acetaldehyde, solanesol, and respirable suspended particulates. Levels of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL) in urine increased significantly during an 8-hour work shift both with and without adjustment for creatinine clearance. Creatinine-unadjusted cotinine significantly increased during the 8-hour shift, but creatinine-adjusted cotinine did not increase significantly. Casino dealers at the three casinos were exposed to airborne ETS components and absorbed an ETS-specific component into their bodies, as demonstrated by detectable levels of urinary NNAL. The casinos should ban smoking on their premises and offer employee smoking cessation programs.

Method for distributed object communications based on dynamically acquired and assembled software components

NASA Technical Reports Server (NTRS)

Sundermier, Amy (Inventor)

2002-01-01

A method for acquiring and assembling software components at execution time into a client program, where the components may be acquired from remote networked servers is disclosed. The acquired components are assembled according to knowledge represented within one or more acquired mediating components. A mediating component implements knowledge of an object model. A mediating component uses its implemented object model knowledge, acquired component class information and polymorphism to assemble components into an interacting program at execution time. The interactions or abstract relationships between components in the object model may be implemented by the mediating component as direct invocations or indirect events or software bus exchanges. The acquired components may establish communications with remote servers. The acquired components may also present a user interface representing data to be exchanged with the remote servers. The mediating components may be assembled into layers, allowing arbitrarily complex programs to be constructed at execution time.

The Component Model of Infrastructure: A Practical Approach to Understanding Public Health Program Infrastructure

PubMed Central

Snyder, Kimberly; Rieker, Patricia P.

2014-01-01

Functioning program infrastructure is necessary for achieving public health outcomes. It is what supports program capacity, implementation, and sustainability. The public health program infrastructure model presented in this article is grounded in data from a broader evaluation of 18 state tobacco control programs and previous work. The newly developed Component Model of Infrastructure (CMI) addresses the limitations of a previous model and contains 5 core components (multilevel leadership, managed resources, engaged data, responsive plans and planning, networked partnerships) and 3 supporting components (strategic understanding, operations, contextual influences). The CMI is a practical, implementation-focused model applicable across public health programs, enabling linkages to capacity, sustainability, and outcome measurement. PMID:24922125

NASA funding opportunities for optical fabrication and testing technology development

NASA Astrophysics Data System (ADS)

Stahl, H. Philip

2013-09-01

NASA requires technologies to fabricate and test optical components to accomplish its highest priority science missions. The NRC ASTRO2010 Decadal Survey states that an advanced large-aperture UVOIR telescope is required to enable the next generation of compelling astrophysics and exo-planet science; and, that present technology is not mature enough to affordably build and launch any potential UVOIR mission concept. The NRC 2012 NASA Space Technology Roadmaps and Priorities Report states that the highest priority technology in which NASA should invest to `Expand our understanding of Earth and the universe' is next generation X-ray and UVOIR telescopes. Each of the Astrophysics division Program Office Annual Technology Reports (PATR) identifies specific technology needs. NASA has a variety of programs to fund enabling technology development: SBIR (Small Business Innovative Research); the ROSES APRA and SAT programs (Research Opportunities in Space and Earth Science; Astrophysics Research and Analysis program; Strategic Astrophysics Technology program); and several Office of the Chief Technologist (OCT) programs.

NASA Funding Opportunities for Optical Fabrication and Testing Technology Development

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2013-01-01

NASA requires technologies to fabricate and test optical components to accomplish its highest priority science missions. The NRC ASTRO2010 Decadal Survey states that an advanced large-aperture UVOIR telescope is required to enable the next generation of compelling astrophysics and exo-planet science; and, that present technology is not mature enough to affordably build and launch any potential UVOIR mission concept. The NRC 2012 NASA Space Technology Roadmaps and Priorities Report states that the highest priority technology in which NASA should invest to 'Expand our understanding of Earth and the universe' is next generation X-ray and UVOIR telescopes. Each of the Astrophysics division Program Office Annual Technology Reports (PATR) identifies specific technology needs. NASA has a variety of programs to fund enabling technology development: SBIR (Small Business Innovative Research); the ROSES APRA and SAT programs (Research Opportunities in Space and Earth Science; Astrophysics Research and Analysis program; Strategic Astrophysics Technology program); and several Office of the Chief Technologist (OCT) programs

NASA Funding Opportunities for Optical Fabrication and Testing Technology Development

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2013-01-01

Technologies to fabricate and test optical components are required for NASA to accomplish its highest priority science missions. For example, the NRC ASTRO2010 Decadal Survey states that an advanced large-aperture UVOIR telescope is required to enable the next generation of compelling astrophysics and exo-planet science; and that present technology is not mature enough to affordably build and launch any potential UVOIR mission concept. The NRC 2012 NASA Space Technology Roadmaps and Priorities report states that the highest priority technology in which NASA should invest to 'Expand our understanding of Earth and the universe' is a new generation of astronomical telescopes. And, each of the Astrophysics division Program Office Annual Technology Reports (PATR), identifies specific technology needs. NASA has a variety of programs to fund enabling technology development: SBIR (Small Business Innovative Research); the ROSES APRA and SAT programs (Research Opportunities in Space and Earth Science; Astrophysics Research and Analysis program; Strategic Astrophysics Technology program); and several Office of the Chief Technologist (OCT) technology development programs.

Programming methodology for a general purpose automation controller

NASA Technical Reports Server (NTRS)

Sturzenbecker, M. C.; Korein, J. U.; Taylor, R. H.

1987-01-01

The General Purpose Automation Controller is a multi-processor architecture for automation programming. A methodology has been developed whose aim is to simplify the task of programming distributed real-time systems for users in research or manufacturing. Programs are built by configuring function blocks (low-level computations) into processes using data flow principles. These processes are activated through the verb mechanism. Verbs are divided into two classes: those which support devices, such as robot joint servos, and those which perform actions on devices, such as motion control. This programming methodology was developed in order to achieve the following goals: (1) specifications for real-time programs which are to a high degree independent of hardware considerations such as processor, bus, and interconnect technology; (2) a component approach to software, so that software required to support new devices and technologies can be integrated by reconfiguring existing building blocks; (3) resistance to error and ease of debugging; and (4) a powerful command language interface.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, S; Guerrero, M; Zhang, B

Purpose: To implement a comprehensive non-measurement-based verification program for patient-specific IMRT QA Methods: Based on published guidelines, a robust IMRT QA program should assess the following components: 1) accuracy of dose calculation, 2) accuracy of data transfer from the treatment planning system (TPS) to the record-and-verify (RV) system, 3) treatment plan deliverability, and 4) accuracy of plan delivery. Results: We have implemented an IMRT QA program that consist of four components: 1) an independent re-calculation of the dose distribution in the patient anatomy with a commercial secondary dose calculation program: Mobius3D (Mobius Medical Systems, Houston, TX), with dose accuracy evaluationmore » using gamma analysis, PTV mean dose, PTV coverage to 95%, and organ-at-risk mean dose; 2) an automated in-house-developed plan comparison system that compares all relevant plan parameters such as MU, MLC position, beam iso-center position, collimator, gantry, couch, field size settings, and bolus placement, etc. between the plan and the RV system; 3) use of the RV system to check the plan deliverability and further confirm using “mode-up” function on treatment console for plans receiving warning; and 4) implementation of a comprehensive weekly MLC QA, in addition to routine accelerator monthly and daily QA. Among 1200 verifications, there were 9 cases of suspicious calculations, 5 cases of delivery failure, no data transfer errors, and no failure of weekly MLC QA. These 9 suspicious cases were due to the PTV extending to the skin or to heterogeneity correction effects, which would not have been caught using phantom measurement-based QA. The delivery failure was due to the rounding variation of MLC position between the planning system and RV system. Conclusion: A very efficient, yet comprehensive, non-measurement-based patient-specific QA program has been implemented and used clinically for about 18 months with excellent results.« less

Commercial technologies from the SP-100 program

NASA Astrophysics Data System (ADS)

Truscello, Vincent C.; Fujita, Toshio; Mondt, Jack F.

1995-01-01

For more than a decade, the Jet Propulsion Labortory (JPL) and Los Alamos National Laboratory (LANL) have managed a multi-agency funded effort to develop a space reactor power system. This SP-100 Program has developed technologies required for space power systems that can be implemented in the industrial and commercial sectors to improve our competitiveness in the global economy. Initial steps taken to transfer this technology from the laboratories to industrial and commercial entities within the United States include: (1) identifying specific technologies having commercial potential; (2) distributing information describing the identified technologies and interacting with interested commercial and industrial entities to develop application-specific details and requirements; and (3) providing a technological data base that leads to transfer of technology or the forming of teaming arrangements to accomplish the transfer by tailoring the technology to meet application-specific requirements. SP-100 technologies having commercial potential encompass fabrication processes, devices, and components. Examples are a process for bonding refractory metals to graphite, a device to sense the position of an actuator and a component to enable rotating machines to operate without supplying lubrication ( a self-lubricating ball bearing). Shortly after the National Aeronautics and Space Administration (NASA) Regional Technology Transfer Centers widely disseminated information covering SP-100 technologies, over one hundred expressions of interest were received. These early responses indicate that there is a large potential benefit in transferring SP-100 technology. Interactions with industrial and commercial entities have identified a substantial need for creating teaming arrangements involving the interested entity and personnel from laboratories and their contractors, who have the knowledge and ability to tailor the technology to meet application-specific requirements.

Concept of Draft International Standard for a Unified Approach to Space Program Quality Assurance

NASA Astrophysics Data System (ADS)

Stryzhak, Y.; Vasilina, V.; Kurbatov, V.

2002-01-01

For want of the unified approach to guaranteed space project and product quality assurance, implementation of many international space programs has become a challenge. Globalization of aerospace industry and participation of various international ventures with diverse quality assurance requirements in big international space programs requires for urgent generation of unified international standards related to this field. To ensure successful fulfillment of space missions, aerospace companies should design and process reliable and safe products with properties complying or bettering User's (or Customer's) requirements. Quality of the products designed or processed by subcontractors (or other suppliers) should also be in compliance with the main user (customer)'s requirements. Implementation of this involved set of unified requirements will be made possible by creating and approving a system (series) of international standards under a generic title Space Product Quality Assurance based on a system consensus principle. Conceptual features of the baseline standard in this system (series) should comprise: - Procedures for ISO 9000, CEN and ECSS requirements adaptation and introduction into space product creation, design, manufacture, testing and operation; - Procedures for quality assurance at initial (design) phases of space programs, with a decision on the end product made based on the principle of independence; - Procedures to arrange incoming inspection of products delivered by subcontractors (including testing, audit of supplier's procedures, review of supplier's documentation), and space product certification; - Procedures to identify materials and primary products applied; - Procedures for quality system audit at the component part, primary product and materials supplier facilities; - Unified procedures to form a list of basic performances to be under configuration management; - Unified procedures to form a list of critical space product components, and unified procedures to define risks related to the specific component application and evaluate safety for the entire program implementation. In the eyes of the authors, those features together with a number of other conceptual proposals should constitute a unified standard-technical basis for implementing international space programs.

Comparison of African American and Caucasian Caregiver Self-Efficacy.

PubMed

Easom, Leisa; Cotter, Ellen; Ramos, Angel

2018-03-01

Self-efficacy influences one's behavior and can determine the degree to which one is motivated to take action. The current study explores changes in caregiver self-efficacy pre- and post-participation in a Resources for Enhancing Alzheimer's Caregiver Health (REACH II) program, a multi-component intervention aimed at caregivers of individuals with Alzheimer's disease. The study specifically compared this construct in African American and Caucasian populations, which may give indications of how to empower dementia caregivers and whether REACH II is culturally sensitive and thus, an important component to examine. Nurses are the connection between families and community resources and must serve as referral sources to programs that work. Although African American and Caucasian caregivers showed comparable rates of increase in self-efficacy, African American caregivers started and ended at higher rates of self-efficacy for obtaining respite and overall self-efficacy. Applications of the results and directions for future research are discussed. [Journal of Gerontological Nursing, 44(3), 16-21.]. Copyright 2018, SLACK Incorporated.

Genome-wide Functional Analysis of CREB/Long-Term Memory-Dependent Transcription Reveals Distinct Basal and Memory Gene Expression Programs

PubMed Central

Lakhina, Vanisha; Arey, Rachel N.; Kaletsky, Rachel; Kauffman, Amanda; Stein, Geneva; Keyes, William; Xu, Daniel; Murphy, Coleen T.

2014-01-01

SUMMARY Induced CREB activity is a hallmark of long-term memory, but the full repertoire of CREB transcriptional targets required specifically for memory is not known in any system. To obtain a more complete picture of the mechanisms involved in memory, we combined memory training with genome-wide transcriptional analysis of C. elegans CREB mutants. This approach identified 757 significant CREB/memory-induced targets and confirmed the involvement of known memory genes from other organisms, but also suggested new mechanisms and novel components that may be conserved through mammals. CREB mediates distinct basal and memory transcriptional programs at least partially through spatial restriction of CREB activity: basal targets are regulated primarily in nonneuronal tissues, while memory targets are enriched for neuronal expression, emanating from CREB activity in AIM neurons. This suite of novel memory-associated genes will provide a platform for the discovery of orthologous mammalian long-term memory components. PMID:25611510

Students' perceptions of their education on graduation from a dental school in India.

PubMed

Shetty, Vittaldas B; Shirahatti, Ravi V; Pawar, Prakash

2012-11-01

This study was conducted with the purpose of assessing students' perceived learning experience at the time of graduation from a dental school in India. The domains appraised were undergraduate curriculum, student motivation and support services, institutional infrastructure, administrative services, components of teaching-learning programs, confidence level in carrying out specific clinical procedures, career choice, and postgraduate specialty preference after graduation. The authors surveyed forty-five dental interns at the end of their undergraduate course, a 100 percent response rate from the class. The results showed that over 95 percent of the graduates were satisfied with the curriculum and 60 to 95 percent reported that the various components of the teaching-learning process were adequate. Only 42 percent of the students were confident about setting up a practice; 65 percent wished to take a course on general dentistry; and 86 percent wanted to pursue postgraduate study. The principal conclusions were that although the program was satisfactory to the majority of participants, some areas of concern were identified that need improvement.

Floodplain sedimentology and sediment accumulation assessment – Savannah River Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yeager, Kevin M.

2016-01-03

The primary goal of the larger research program, of which this work is one component, is to restore the hydrodynamics and energy gradients of targeted Savannah River Site (SRS) streams to a condition comparable to local natural streams or rivers of similar order, and to stabilize sediment transport (net degradation/aggregation) with the assumption that the faunal components of these systems will quickly recover on their own (e.g., Pen Branch; Lakly and McArthur, 2000). This work is specifically focused on the identification of near-stream floodplain areas that exhibit sediment deposition or erosion, and the quantification of these processes over a historicalmore » time scale (last ~100 years).« less

Recommendations for managing patients with diabetes mellitus in cardiopulmonary rehabilitation: an American Association of Cardiovascular and Pulmonary Rehabilitation statement.

PubMed

Lopez-Jimenez, Francisco; Kramer, Valerie Carroll; Masters, Barbara; Stuart, Patricia Mickey W; Mullooly, Cathy; Hinshaw, Ling; Haas, Linda; Warwick, Kathy

2012-01-01

Diabetes mellitus is a highly prevalent condition in patients participating in cardiopulmonary rehabilitation. However, research and subsequent guidelines specifically applicable to patients with diabetes, participating in cardiopulmonary rehabilitation, are limited. Recognizing this limitation, the American Association of Cardiovascular and Pulmonary Rehabilitation (AACVPR) initiated this statement, with the goal of developing a template that incorporated recommendations provided in the AACVPR Core Components and the American Association of Diabetes Educators 7 Self-Care Behaviors. This statement describes key processes regarding evaluation, interventions, and expected outcomes in each of the core components for the management of patients with diabetes in a cardiopulmonary rehabilitation program.

Alloy 740H Component Manufacturing Development

NASA Astrophysics Data System (ADS)

de Barbadillo, J. J.; Baker, B. A.; Gollihue, R. D.; Patel, S. J.

Alloy 740H was developed specifically for use in A-USC power plants. This alloy has been intensively evaluated in collaborative programs throughout the world, and the key properties have been verified and documented. In 2011 the alloy was approved for use in welded construction under ASME Code Case 2702. At present, alloy 740H is the only age-hardened nickel-base alloy that is ASME code approved. The emphasis for A-USC materials development is now on verification of the metalworking industry's capability to make the full range of mill product forms and sizes and to produce fittings and fabrications required for construction of a power plant. This paper presents the results of recent developments in component manufacture and evaluation.

Genesis of an Employee Wellness Program at a Large University.

PubMed

Lloyd, Lisa K; Crixell, Sylvia H; Bezner, Janet R; Forester, Katherine; Swearingen, Carolyn

2017-11-01

University employee wellness programs have potential to support positive changes in employee health, thereby improving productivity and mitigating the rise in health care costs. The purpose of this article is to describe a theory-driven approach to systematically planning, developing, and implementing a comprehensive university employee wellness program. Long-term program goals were to improve employee health, well-being, and productivity by focusing on decreasing sedentary behavior, increasing physical activity, improving dietary habits, and reducing stress. An ecological approach was taken to identify levels of influence specific to a university setting: intrapersonal, interpersonal, department/college/division, and university. This framework guided the development of program components and strategies, which were grounded in several health behavior change theories. Input from supervisors and employees was incorporated throughout program development. A 15-week trial run, involving 514 employees, was evaluated to fine-tune services. Participation and feedback were positive, demonstrating that the program was valued. Support from upper administration is evidenced by continued funding. Critical factors to the successful launch of the program included a supportive administration, leverage of existing facilities and equipment, leadership provided by faculty, and service delivery by students.

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Ray, C. D. (Compiler); Salyer, B. H. (Compiler)

1999-01-01

This Technical Memorandum provides a summary of current work accomplished under Technical Task Agreement (TTA) by the Marshall Space Flight Center (MSFC) regarding the International Space Station (ISS) Environmental Control and Life Support System (ECLSS). Current activities include ECLSS component design and development, computer model development, subsystem/integrated system testing, life testing, and general test support provided to the ISS program. Under ECLSS design, MSFC was responsible for the six major ECLSS functions, specifications and standard, component design and development, and was the architectural control agent for the ISS ECLSS. MSFC was responsible for ECLSS analytical model development. In-house subsystem and system level analysis and testing were conducted in support of the design process, including testing air revitalization, water reclamation and management hardware, and certain nonregenerative systems. The activities described herein were approved in task agreements between MSFC and NASA Headquarters Space Station Program Management Office and their prime contractor for the ISS, Boeing. These MSFC activities are in line to the designing, development, testing, and flight of ECLSS equipment planned by Boeing. MSFC's unique capabilities for performing integrated systems testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs, are the basis for the TTA activities.

Temperature measurement using infrared imaging systems during turbine engine altitude testing

NASA Technical Reports Server (NTRS)

Burns, Maureen E.

1994-01-01

This report details the use of infrared imaging for temperature measurement and thermal pattern determination during simulated altitude engine testing in the NASA Lewis Propulsion Systems Laboratory. Three identical argon-cooled imaging systems were installed in the facility exhaust collector behind sapphire windows to look at engine internal surfaces. The report describes the components of each system, presents the specifics of the complicated installation, and explains the operation of the systems during engine testing. During the program, several problems emerged, such as argon contamination system, component overheating, cracked sapphire windows, and other unexplained effects. This report includes a summary of the difficulties as well as the solutions developed. The systems performed well, considering they were in an unusually harsh exhaust environment. Both video and digital data were recorded, and the information provided valuable material for the engineers and designers to quickly make any necessary design changes to the engine hardware cooling system. The knowledge and experience gained during this program greatly simplified the installation and use of the systems during later test programs in the facility. The infrared imaging systems have significantly enhanced the measurement capabilities of the facility, and have become an outstanding and versatile testing resource in the Propulsion Systems Laboratory.

Bridging the Divide between Safety and Risk Management for your Project or Program

NASA Technical Reports Server (NTRS)

Lutomski, Mike

2005-01-01

This presentation will bridge the divide between these separate but overlapping disciplines and help explain how to use Risk Management as an effective management decision support tool that includes safety. Risk Management is an over arching communication tool used by management to prioritize and effectively mitigate potential problems before they concur. Risk Management encompasses every kind of potential problem that can occur on a program or project. Some of these are safety issues such as hazards that have a specific likelihood and consequence that need to be controlled and included to show an integrated picture of accepted) mitigated, and residual risk. Integrating safety and other assurance disciplines is paramount to accurately representing a program s or projects risk posture. Risk is made up of several components such as technical) cost, schedule, or supportability. Safety should also be a consideration for every risk. The safety component can also have an impact on the technical, cost, and schedule aspect of a given risk. The current formats used for communication of safety and risk issues are not consistent or integrated. The presentation will explore the history of these disciplines, current work to integrate them, and suggestions for integration for the future.

The basic helix-loop-helix transcription factor Nex-1/Math-2 promotes neuronal survival of PC12 cells by modulating the dynamic expression of anti-apoptotic and cell cycle regulators

PubMed Central

Uittenbogaard, Martine; Chiaramello, Anne

2006-01-01

The basic helix-loop-helix transcription factor Nex1/Math-2 belongs to the NeuroD subfamily, which plays a critical role during neuronal differentiation and maintenance of the differentiated state. Previously, we demonstrated that Nex1 is a key regulatory component of the nerve growth factor (NGF) pathway. Further supporting this hypothesis, this study shows that Nex1 has survival-inducing properties similar to NGF, as Nex1-overexpressing PC12 cells survive in the absence of trophic factors. We dissected the molecular mechanism by which Nex1 confers neuroprotection upon serum removal and found that constitutive expression of Nex1 maintained the expression of specific G1 phase cyclin-dependent kinase inhibitors and concomitantly induced a dynamic expression profile of key anti-apoptotic regulators. This study provides the first evidence of the underlying mechanism by which a member of the NeuroD-subfamily promotes an active anti-apoptotic program essential to the survival of neurons. Our results suggest that the survival program may be viewed as an integral component of the intrinsic programming of the differ entiated state. PMID:15659228

Understanding Program Monitoring: The Relationships among Outcomes, Indicators, Measures, and Targets. REL 2014-011

ERIC Educational Resources Information Center

Malone, Nolan; Mark, Lauren; Narayan, Krishna

2014-01-01

This guide offers educators, program managers, administrators, and researchers a resource for building capacity for monitoring program outcomes. It provides concise definitions of program monitoring components and a framework for assessing program progress. Examples demonstrate the relationships among program components: outcomes, indicators,…

Using an architectural approach to integrate heterogeneous, distributed software components

NASA Technical Reports Server (NTRS)

Callahan, John R.; Purtilo, James M.

1995-01-01

Many computer programs cannot be easily integrated because their components are distributed and heterogeneous, i.e., they are implemented in diverse programming languages, use different data representation formats, or their runtime environments are incompatible. In many cases, programs are integrated by modifying their components or interposing mechanisms that handle communication and conversion tasks. For example, remote procedure call (RPC) helps integrate heterogeneous, distributed programs. When configuring such programs, however, mechanisms like RPC must be used explicitly by software developers in order to integrate collections of diverse components. Each collection may require a unique integration solution. This paper describes improvements to the concepts of software packaging and some of our experiences in constructing complex software systems from a wide variety of components in different execution environments. Software packaging is a process that automatically determines how to integrate a diverse collection of computer programs based on the types of components involved and the capabilities of available translators and adapters in an environment. Software packaging provides a context that relates such mechanisms to software integration processes and reduces the cost of configuring applications whose components are distributed or implemented in different programming languages. Our software packaging tool subsumes traditional integration tools like UNIX make by providing a rule-based approach to software integration that is independent of execution environments.

Components of effective randomized controlled trials of hydrotherapy programs for fibromyalgia syndrome: A systematic review

PubMed Central

Perraton, Luke; Machotka, Zuzana; Kumar, Saravana

2009-01-01

Aim Previous systematic reviews have found hydrotherapy to be an effective management strategy for fibromyalgia syndrome (FMS). The aim of this systematic review was to summarize the components of hydrotherapy programs used in randomized controlled trials. Method A systematic review of randomized controlled trials was conducted. Only trials that have reported significant FMS-related outcomes were included. Data relating to the components of hydrotherapy programs (exercise type, duration, frequency and intensity, environmental factors, and service delivery) were analyzed. Results Eleven randomized controlled trials were included in this review. Overall, the quality of trials was good. Aerobic exercise featured in all 11 trials and the majority of hydrotherapy programs included either a strengthening or flexibility component. Great variability was noted in both the environmental components of hydrotherapy programs and service delivery. Conclusions Aerobic exercise, warm up and cool-down periods and relaxation exercises are common features of hydrotherapy programs that report significant FMS-related outcomes. Treatment duration of 60 minutes, frequency of three sessions per week and an intensity equivalent to 60%–80% maximum heart rate were the most commonly reported exercise components. Exercise appears to be the most important component of an effective hydrotherapy program for FMS, particularly when considering mental health-related outcomes. PMID:21197303

Computer aided airship design

NASA Technical Reports Server (NTRS)

Davis, S. J.; Rosenstein, H.

1975-01-01

The Comprehensive Airship Sizing and Performance Computer Program (CASCOMP) is described which was developed and used in the design and evaluation of advanced lighter-than-air (LTA) craft. The program defines design details such as engine size and number, component weight buildups, required power, and the physical dimensions of airships which are designed to meet specified mission requirements. The program is used in a comparative parametric evaluation of six advanced lighter-than-air concepts. The results indicate that fully buoyant conventional airships have the lightest gross lift required when designed for speeds less than 100 knots and the partially buoyant concepts are superior above 100 knots. When compared on the basis of specific productivity, which is a measure of the direct operating cost, the partially buoyant lifting body/tilting prop-rotor concept is optimum.

Establishing a standardized dental record-keeping system for a small investigational colony of rhesus monkeys (Macaca mulatta).

PubMed

Gibson, B W; McGuffey, L; Raflo, C P; Niemiec, B A

2008-02-01

Dental hygiene is becoming an increasingly important component of quality health care for laboratory animals, especially non-human primates (NHPs). One key to a successful health care program is an effective and efficient record-keeping system. To standardize a dental hygiene program for a small colony of NHPs, we developed a dental recording chart specific for rhesus monkeys. This dental chart was developed using the modified Triadan system. This system numbers teeth across species according to location. An illustrative case report was presented to demonstrate the accurate record keeping and spatial relationship generated from this Old World NHP dental chart design. The development and implementation of a standardized dental chart, as part of a dental hygiene program will help minimize variables that may affect research data.

Advanced development of a programmable power processor

NASA Technical Reports Server (NTRS)

Lukens, F. E.; Lanier, J. R., Jr.; Kapustka, R. E.; Graves, J.

1980-01-01

The need for the development of a multipurpose flexible programmable power processor (PPP) has increased significantly in recent years to reduce ever rising development costs. One of the program requirements the PPP specification will cover is the 25 kW power module power conversion needs. The 25 kW power module could support the Space Shuttle program during the 1980s and 1990s and could be the stepping stone to future large space programs. Trades that led to selection of a microprocessor controlled power processor are briefly discussed. Emphasis is given to the power processing equipment that uses a microprocessor to provide versatility that allows multiple use and to provide for future growth by reprogramming output voltage to a higher level (to 120 V from 30 V). Component selection and design considerations are also discussed.

Environmental Approaches to Prevention in College Settings

PubMed Central

Saltz, Robert F.

2011-01-01

Because of concerns regarding drinking among college students and its harmful consequences, numerous prevention efforts have been targeted to this population. These include individual-level and community-level interventions, as well as other measures (e.g., online approaches). Community-level interventions whose effects have been evaluated in college populations include programs that were developed for the community at large as well as programs aimed specifically at college students, such as A Matter of Degree, the Southwest DUI Enforcement Project, Neighborhoods Engaging With Students, the Study to Prevent Alcohol-Related Consequences, and Safer California Universities. Evaluations of these programs have found evidence of their effectiveness in reducing college drinking and related consequences. The most effective approaches to reducing alcohol consumption among college students likely will blend individual-, group-, campus-, and community-level prevention components. PMID:22330219

NASA Procurement Career Development Program

NASA Technical Reports Server (NTRS)

1987-01-01

The NASA Procurement Career Development Program establishes an agency-wide framework for the management of career development activity in the procurement field. Within this framework, installations are encouraged to modify the various components to meet installation-specific mission and organization requirements. This program provides a systematic process for the assessment of and planning for the development, training, and education required to increase the employees' competence in the procurement work functions. It includes the agency-wide basic knowledge and skills by career field and level upon which individual and organizational development plans are developed. Also, it provides a system that is compatible with other human resource management and development systems, processes, and activities. The compatibility and linkage are important in fostering the dual responsibility of the individual and the organization in the career development process.

Automated Gun Laying System for Self-Propelled Artillery Weapons.

DTIC Science & Technology

1980-05-30

model designed specifically to the requirements of a test bed system. The system configuration and characteristics were specified through a series of...proposed by the contractor was further defined, utilizing the M109 component information provided by the COTR. Math models were developed to predict system...data. The model used for the TB-I program did not have the capability for a remote reset function, hence it was necessary to instruct the crew (loader

JPL preferred parts list: Reliable electronic components

NASA Technical Reports Server (NTRS)

Covey, R. E.; Scott, W. R.; Hess, L. M.; Steffy, T. G.; Stott, F. R.

1982-01-01

The JPL Preferred Parts List was prepared to provide a basis for selection of electronic parts for JPL spacecraft programs. Supporting tests for the listed parts were designed to comply with specific spacecraft environmental requirements. The list tabulates the electronic, magnetic, and electromechanical parts applicable to all JPL electronic equipment wherein reliability is a major concern. The parts listed are revelant to equipment supplied by subcontractors as well as fabricated at the laboratory.

Qualification of an evaluated butterfly-packaged DFB laser designed for space applications

NASA Astrophysics Data System (ADS)

Tornow, S.; Stier, C.; Buettner, T.; Laurent, T.; Kneier, M.; Bru, J.; Lien, Y.

2017-11-01

An extended qualification program has proven the quality of a previously evaluated semiconductor laser diode, which is intended to be used in a subsystem for the GAIA mission. We report on results of several reliability tests performed in subgroups. The requirements of the procurement specification with respect to reliability and desired manufacturing processes were confirmed. This is an example for successful collaboration between component supplier, system integrator and payload responsible party.

Programs for Children with Specific Learning Disabilities. P.L. 91-230, Title VI-G. Final Report on Products and Results of Year's Work, July 1, 1973 to June 30, 1974. Fail Save Continuum.

ERIC Educational Resources Information Center

1974

Presented is the final report of the Learning Disability Fail-Save Continuum Project, designed to provide identification, assessment, and placement services to 378 elementary and secondary level students. Outlined in Section I are the following project components: major revisions from the original proposal (such as implementation of the itinerant…

SIRU utilization. Volume 1: Theory, development and test evaluation

NASA Technical Reports Server (NTRS)

Musoff, H.

1974-01-01

The theory, development, and test evaluations of the Strapdown Inertial Reference Unit (SIRU) are discussed. The statistical failure detection and isolation, single position calibration, and self alignment techniques are emphasized. Circuit diagrams of the system components are provided. Mathematical models are developed to show the performance characteristics of the subsystems. Specific areas of the utilization program are identified as: (1) error source propagation characteristics and (2) local level navigation performance demonstrations.

Advanced On-the-Job Training System: System Specification

DTIC Science & Technology

1990-05-01

3.1.5.2.10 Evaluation Subsystem spotfor the Traking Devopment and Deliery Subsystem ..... 22 3.1.5.2.11 TrIning Development=dDelivery Subsystem sL...e. Alsys Ada compiler f. Ethernet Local Area Network reference manual(s) g. Infotron 992 network reference manual(s) h. Computer Program Source...1989 a. Daily check of mainframe components, including all elements critical to support the terminal network . b. Restoration of mainframe equipment

System design of the Pioneer Venus spacecraft. Volume 2: Science

NASA Technical Reports Server (NTRS)

Acheson, L. K.

1973-01-01

The objectives of the low-cost Pioneer Venus space probe program are discussed. The space mission and science requirements are analyzed. The subjects considered are as follows: (1) the multiprobe mission, (2) the orbiter mission, (3) science payload accomodations, and (4) orbiter spacecraft experimental interface specifications. Tables of data are provided to show the science allocations for large and small probes. Illustrations of the systems and components of various probe configurations are included.

Towards a behavioral-matching based compilation of synthetic biology functions.

PubMed

Basso-Blandin, Adrien; Delaplace, Franck

2015-09-01

The field of synthetic biology is looking forward engineering framework for safely designing reliable de-novo biological functions. In this undertaking, Computer-Aided-Design (CAD) environments should play a central role for facilitating the design. Although, CAD environment is widely used to engineer artificial systems the application in synthetic biology is still in its infancy. In this article we address the problem of the design of a high level language which at the core of CAD environment. More specifically the Gubs (Genomic Unified Behavioural Specification) language is a specification language used to describe the observations of the expected behaviour. The compiler appropriately selects components such that the observation of the synthetic biological function resulting to their assembly complies to the programmed behaviour.

Dynamic trunk stabilization: a conceptual back injury prevention program for volleyball athletes.

PubMed

Smith, Chad E; Nyland, John; Caudill, Paul; Brosky, Joseph; Caborn, David N M

2008-11-01

The sport of volleyball creates considerable dynamic trunk stability demands. Back injury occurs all too frequently in volleyball, particularly among female athletes. The purpose of this clinical commentary is to review functional anatomy, muscle coactivation strategies, assessment of trunk muscle performance, and the characteristics of effective exercises for the trunk or core. From this information, a conceptual progressive 3-phase volleyball-specific training program is presented to improve dynamic trunk stability and to potentially reduce the incidence of back injury among volleyball athletes. Phase 1 addresses low-velocity motor control, kinesthetic awareness, and endurance, with the clinician providing cues to teach achievement of biomechanically neutral spine alignment. Phase 2 focuses on progressively higher velocity dynamic multiplanar endurance, coordination, and strength-power challenges integrating upper and lower extremity movements, while maintaining neutral spine alignment. Phase 3 integrates volleyball-specific skill simulations by breaking down composite movement patterns into their component parts, with differing dynamic trunk stability requirements, while maintaining neutral spine alignment. Prospective research is needed to validate the efficacy of this program.

A SiGe Quadrature Pulse Modulator for Superconducting Qubit State Manipulation

NASA Astrophysics Data System (ADS)

Kwende, Randy; Bardin, Joseph

Manipulation of the quantum states of microwave superconducting qubits typically requires the generation of coherent modulated microwave pulses. While many off-the-shelf instruments are capable of generating such pulses, a more integrated approach is likely required if fault-tolerant quantum computing architectures are to be implemented. In this work, we present progress towards a pulse generator specifically designed to drive superconducing qubits. The device is implemented in a commercial silicon process and has been designed with energy-efficiency and scalability in mind. Pulse generation is carried out using a unique approach in which modulation is applied directly to the in-phase and quadrature components of a carrier signal in the 1-10 GHz frequency range through a unique digital-analog conversion process designed specifically for this application. The prototype pulse generator can be digitally programmed and supports sequencing of pulses with independent amplitude and phase waveforms. These amplitude and phase waveforms can be digitally programmed through a serial programming interface. Detailed performance of the pulse generator at room temperature and 4 K will be presented.

The Chromatin Remodeler BPTF Activates a Stemness Gene-Expression Program Essential for the Maintenance of Adult Hematopoietic Stem Cells.

PubMed

Xu, Bowen; Cai, Ling; Butler, Jason M; Chen, Dongliang; Lu, Xiongdong; Allison, David F; Lu, Rui; Rafii, Shahin; Parker, Joel S; Zheng, Deyou; Wang, Gang Greg

2018-03-13

Self-renewal and differentiation of adult stem cells are tightly regulated partly through configuration of chromatin structure by chromatin remodelers. Using knockout mice, we here demonstrate that bromodomain PHD finger transcription factor (BPTF), a component of the nucleosome remodeling factor (NURF) chromatin-remodeling complex, is essential for maintaining the population size of hematopoietic stem/progenitor cells (HSPCs), including long-term hematopoietic stem cells (HSCs). Bptf-deficient HSCs are defective in reconstituted hematopoiesis, and hematopoietic-specific knockout of Bptf caused profound defects including bone marrow failure and anemia. Genome-wide transcriptome profiling revealed that BPTF loss caused downregulation of HSC-specific gene-expression programs, which contain several master transcription factors (Meis1, Pbx1, Mn1, and Lmo2) required for HSC maintenance and self-renewal. Furthermore, we show that BPTF potentiates the chromatin accessibility of key HSC "stemness" genes. These results demonstrate an essential requirement of the chromatin remodeler BPTF and NURF for activation of "stemness" gene-expression programs and proper function of adult HSCs. Copyright © 2018 The Author(s). Published by Elsevier Inc. All rights reserved.

Axonal Degeneration Is Regulated by a Transcriptional Program that Coordinates Expression of Pro- and Anti-degenerative Factors.

PubMed

Maor-Nof, Maya; Romi, Erez; Sar Shalom, Hadas; Ulisse, Valeria; Raanan, Calanit; Nof, Aviv; Leshkowitz, Dena; Lang, Roland; Yaron, Avraham

2016-12-07

Developmental neuronal cell death and axonal elimination are controlled by transcriptional programs, of which their nature and the function of their components remain elusive. Here, we identified the dual specificity phosphatase Dusp16 as part of trophic deprivation-induced transcriptome in sensory neurons. Ablation of Dusp16 enhanced axonal degeneration in response to trophic withdrawal, suggesting that it has a protective function. Moreover, axonal skin innervation was severely reduced while neuronal elimination was increased in the Dusp16 knockout. Mechanistically, Dusp16 negatively regulates the transcription factor p53 and antagonizes the expression of the pro-degenerative factor, Puma (p53 upregulated modulator of apoptosis). Co-ablation of Puma with Dusp16 protected axons from rapid degeneration and specifically reversed axonal innervation loss early in development with no effect on neuronal deficits. Overall, these results reveal that physiological axonal elimination is regulated by a transcriptional program that integrates regressive and progressive elements and identify Dusp16 as a new axonal preserving factor. Copyright © 2016 Elsevier Inc. All rights reserved.

Pilot study of a mindfulness-based, multi-component, in-school group sleep intervention in adolescent girls.

PubMed

Bei, Bei; Byrne, Michelle L; Ivens, Clare; Waloszek, Joanna; Woods, Michael J; Dudgeon, Paul; Murray, Greg; Nicholas, Christian L; Trinder, John; Allen, Nicholas B

2013-05-01

Existing literature links poor sleep and anxiety symptoms in adolescents. This pilot study aimed to develop a practical method through which a program to improve sleep could reach adolescents in need and to examine the feasibility of a mindfulness-based, multi-component group sleep intervention using sleep and anxiety as outcome measures. Sixty-two grade 9 students (aged 13-15) at a girls' school were screened with the Pittsburgh Sleep Quality Index (PSQI) and Spence Children's Anxiety Scale (SCAS). Ten participants with self-reported poor sleep were enrolled into a six-session program based on Bootzin & Stevens, with added stress/anxiety-specific components. Sessions covered key aspects of basic mindfulness concepts and practice, sleep hygiene, sleep scheduling, evening/daytime habits, stimulus control, skills for bedtime worries and healthy attitudes to sleep. Treatment changes were measured by pre-post scores on the PSQI, SCAS and 7-day actigraphy-measured sleep. The program demonstrated high acceptability, with a completion rate of 90%. Based on effect-size analysis, participants showed significant improvement on objective sleep onset latency (SOL), sleep efficiency and total sleep time; actigraphy data also showed significantly earlier bedtime, rise time and smaller day-to-day bedtime variation. Post-intervention global PSQI scores were significantly lower than that of pre-intervention, with significant improvement in subjective SOL, sleep quality and sleep-related daytime dysfunction. There were small improvements on some subscales of the SCAS, but change on its total score was minimal. A mindfulness-based, multi-component, in-school group sleep intervention following brief screening is feasible, and has the potential to improve sleep. Its impact on anxiety needs further investigation. © 2012 Wiley Publishing Asia Pty Ltd.

Digital optical computers at the optoelectronic computing systems center

NASA Technical Reports Server (NTRS)

Jordan, Harry F.

1991-01-01

The Digital Optical Computing Program within the National Science Foundation Engineering Research Center for Opto-electronic Computing Systems has as its specific goal research on optical computing architectures suitable for use at the highest possible speeds. The program can be targeted toward exploiting the time domain because other programs in the Center are pursuing research on parallel optical systems, exploiting optical interconnection and optical devices and materials. Using a general purpose computing architecture as the focus, we are developing design techniques, tools and architecture for operation at the speed of light limit. Experimental work is being done with the somewhat low speed components currently available but with architectures which will scale up in speed as faster devices are developed. The design algorithms and tools developed for a general purpose, stored program computer are being applied to other systems such as optimally controlled optical communication networks.

Advanced Photovoltaic Solar Array program status

NASA Technical Reports Server (NTRS)

Kurland, Richard M.; Stella, Paul M.

1989-01-01

The Advanced Photolvoltaic Solar Array (APSA) Program is discussed. The objective of the program is to demonstrate a producible array system by the end of this decade with a beginning-of-life (BOL) specific power of 130 W/kg at 10 kW as an intermediate milestone toward the ultimate goal of 300 W/kg at 25 kW by the year 2000. The near-term goal represents a significant improvement over existing rigid panel flight arrays (25 to 45 W/kg) and the first-generation flexible blanket NASA/OAST SAFE I array of the early 1980s, which was projected to provide about 60 W/kg BOL. The prototype wing hardware is in the last stages of fabrication and integration. The current status of the program is reported. The array configuration and key design details are shown. Projections are shown for future performance enhancements that may be expected through the use of advanced structural components and solar cells.

Telescope Fabra ROA Montsec: A New Robotic Wide Field Baker-Nunn Facility

NASA Astrophysics Data System (ADS)

Fors, Octavi; Núñez, Jorge; Muiños, José Luis; Montojo, Francisco Javier; Baena-Gallé, Roberto; Boloix, Jaime; Morcillo, Ricardo; Merino, María Teresa; Downey, Elwood C.; Mazur, Michael J.

2013-05-01

A Baker-Nunn Camera (BNC), originally installed at the Real Instituto y Observatorio de la Armada (ROA) in 1958, was refurbished and robotized. The new facility, called Telescope Fabra ROA Montsec (TFRM), was installed at the Observatori Astronòmic del Montsec (OAdM). The process of refurbishment is described in detail. Most of the steps of the refurbishment project were accomplished by purchasing commercial components, which involve little posterior engineering assembling work. The TFRM is a 0.5 m aperture f/0.96 optically modified BNC, which offers a unique combination of instrumental specifications: fully robotic and remote operation, wide field of view (4°.4 × 4°.4), moderate limiting magnitude (V ˜ 19.5 mag), ability of tracking at arbitrary right ascension (α) and declination (δ) rates, as well as opening and closing CCD shutter at will during an exposure. Nearly all kinds of image survey programs can benefit from those specifications. Apart from other less time-consuming programs, since the beginning of science TFRM operations we have been conducting two specific and distinct surveys: super-Earths transiting around M-type dwarfs stars, and geostationary debris in the context of Space Situational Awareness/Space Surveillance and Tracking (SSA/SST) programs. Preliminary results for both cases will be shown.

Is Stacking Intervention Components Cost-Effective? An Analysis of the Incredible Years Program

ERIC Educational Resources Information Center

Foster, E. Michael; Olchowski, Allison E.; Webster-Stratton, Carolyn H.

2007-01-01

The cost-effectiveness of delivering stacked multiple intervention components for children is compared to implementing single intervention by analyzing the Incredible Years Series program. The result suggests multiple intervention components are more cost-effective than single intervention components.

Comparison of electron beam and laser beam powder bed fusion additive manufacturing process for high temperature turbine component materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dryepondt, Sebastien N; Pint, Bruce A; Ryan, Daniel

2016-04-01

The evolving 3D printer technology is now at the point where some turbine components could be additive manufactured (AM) for both development and production purposes. However, this will require a significant evaluation program to qualify the process and components to meet current design and quality standards. The goal of the project was to begin characterization of the microstructure and mechanical properties of Nickel Alloy X (Ni-22Cr-18Fe-9Mo) test bars fabricated by powder bed fusion (PBF) AM processes that use either an electron beam (EB) or laser beam (LB) power source. The AM materials produced with the EB and LB processes displayedmore » significant differences in microstructure and resultant mechanical properties. Accordingly, during the design analysis of AM turbine components, the specific mechanical behavior of the material produced with the selected AM process should be considered. Comparison of the mechanical properties of both the EB and LB materials to those of conventionally processed Nickel Alloy X materials indicates the subject AM materials are viable alternatives for manufacture of some turbine components.« less

Design and implementation of components for a bioregenerative system for growing higher order plants in space

NASA Technical Reports Server (NTRS)

Brakman, B.; Dioso, L.; Parker, D.; Segal, L.; Merriman, C.; Howard, I.; Vu, H.; Anderson, K.; Riley, S.; Amery, D.

1989-01-01

This report summarizes the efforts of the NASA/USRA Advanced Design Program during the 1988-89 scholastic year. The primary goal was to address specific needs in the design of an integrated system to grow higher order plants in space. The initial phase of the design effort concentrated on studying such a system and identifying its needs. Once these needs were defined, emphasis was placed on the design and fabrication of devices to meet them. Specific attention was placed on a hand-held harvester, a nutrient concentration sensor, an air-water separator, and a closed-loop biological system simulation.

SAGA: A project to automate the management of software production systems

NASA Technical Reports Server (NTRS)

Campbell, Roy H.; Beckman, Carol S.; Benzinger, Leonora; Beshers, George; Hammerslag, David; Kimball, John; Kirslis, Peter A.; Render, Hal; Richards, Paul; Terwilliger, Robert

1985-01-01

The SAGA system is a software environment that is designed to support most of the software development activities that occur in a software lifecycle. The system can be configured to support specific software development applications using given programming languages, tools, and methodologies. Meta-tools are provided to ease configuration. The SAGA system consists of a small number of software components that are adapted by the meta-tools into specific tools for use in the software development application. The modules are design so that the meta-tools can construct an environment which is both integrated and flexible. The SAGA project is documented in several papers which are presented.

A Module Language for Typing by Contracts

NASA Technical Reports Server (NTRS)

Glouche, Yann; Talpin, Jean-Pierre; LeGuernic, Paul; Gautier, Thierry

2009-01-01

Assume-guarantee reasoning is a popular and expressive paradigm for modular and compositional specification of programs. It is becoming a fundamental concept in some computer-aided design tools for embedded system design. In this paper, we elaborate foundations for contract-based embedded system design by proposing a general-purpose module language based on a Boolean algebra allowing to define contracts. In this framework, contracts are used to negotiate the correctness of assumptions made on the definition of a component at the point where it is used and provides guarantees to its environment. We illustrate this presentation with the specification of a simplified 4-stroke engine model.

Using program impact pathways to understand and improve program delivery, utilization, and potential for impact of Helen Keller International's homestead food production program in Cambodia.

PubMed

Olney, Deanna K; Vicheka, Sao; Kro, Meng; Chakriya, Chhom; Kroeun, Hou; Hoing, Ly Sok; Talukder, Aminzzaman; Quinn, Victoria; Iannotti, Lora; Becker, Elisabeth; Roopnaraine, Terry

2013-06-01

Evidence of the impact of homestead food production programs on nutrition outcomes such as anemia and growth is scant. In the absence of information on program impact pathways, it is difficult to understand why these programs, which have been successful in increasing intake of micronutrient-rich foods, have had such limited documented impact on nutrition outcomes. To conduct a process evaluation of Helen Keller International's (HKI's) homestead food production program in Cambodia to assess whether the program was operating as planned (in terms of design, delivery, and utilization) and to identify ways in which the program might need to be strengthened in order to increase its potential for impact. A program theory framework, which laid out the primary components along the hypothesized program impact pathways, was developed in collaboration with HKI and used to design the research. Semistructured interviews and focus group discussions with program beneficiaries (n = 36 and 12, respectively), nonbeneficiaries (n = 12), and program implementers (n = 17 and 2, respectively) and observations of key program delivery points, including health and nutrition training sessions (n = 6), village model farms (n = 6), and household gardens of beneficiaries (n = 36) and nonbeneficiaries (n = 12), were conducted to assess the delivery and utilization of the primary program components along the impact pathways. The majority of program components were being delivered and utilized as planned. However, challenges with some of the key components posited to improve outcomes such as anemia and growth were noted. Among these were a gap in the expected pathway from poultry production to increased intake of eggs and poultry meat, and some weaknesses in the delivery of the health and nutrition training sessions and related improvements in knowledge among the village health volunteers and beneficiaries. Although the program has been successful in delivering the majority of the program components as planned and has documented achievements in improving household production and intake of micronutrient-rich foods, it is likely that strengthening delivery and increasing utilization of some program components would increase its potential for nutritional impacts. This research has highlighted the importance of designing a program theory framework and assessing the components that lie along the primary program impact pathways to optimize program service delivery and utilization and, in turn, potential for impact.

RSM 1.0 - A RESUPPLY SCHEDULER USING INTEGER OPTIMIZATION

NASA Technical Reports Server (NTRS)

Viterna, L. A.

1994-01-01

RSM, Resupply Scheduling Modeler, is a fully menu-driven program that uses integer programming techniques to determine an optimum schedule for replacing components on or before the end of a fixed replacement period. Although written to analyze the electrical power system on the Space Station Freedom, RSM is quite general and can be used to model the resupply of almost any system subject to user-defined resource constraints. RSM is based on a specific form of the general linear programming problem in which all variables in the objective function and all variables in the constraints are integers. While more computationally intensive, integer programming was required for accuracy when modeling systems with small quantities of components. Input values for component life cane be real numbers, RSM converts them to integers by dividing the lifetime by the period duration, then reducing the result to the next lowest integer. For each component, there is a set of constraints that insure that it is replaced before its lifetime expires. RSM includes user-defined constraints such as transportation mass and volume limits, as well as component life, available repair crew time and assembly sequences. A weighting factor allows the program to minimize factors such as cost. The program then performs an iterative analysis, which is displayed during the processing. A message gives the first period in which resources are being exceeded on each iteration. If the scheduling problem is unfeasible, the final message will also indicate the first period in which resources were exceeded. RSM is written in APL2 for IBM PC series computers and compatibles. A stand-alone executable version of RSM is provided; however, this is a "packed" version of RSM which can only utilize the memory within the 640K DOS limit. This executable requires at least 640K of memory and DOS 3.1 or higher. Source code for an APL2/PC workspace version is also provided. This version of RSM can make full use of any installed extended memory but must be run with the APL2 interpreter; and it requires an 80486 based microcomputer or an 80386 based microcomputer with an 80387 math coprocessor, at least 2Mb of extended memory, and DOS 3.3 or higher. The standard distribution medium for this package is one 5.25 inch 360K MS-DOS format diskette. RSM was developed in 1991. APL2 and IBM PC are registered trademarks of International Business Machines Corporation. MS-DOS is a registered trademark of Microsoft Corporation.

Competency-Based Education in Low Resource Settings: Development of a Novel Surgical Training Program.

PubMed

McCullough, Meghan; Campbell, Alex; Siu, Armando; Durnwald, Libby; Kumar, Shubha; Magee, William P; Swanson, Jordan

2018-03-01

The unmet burden of surgical disease represents a major global health concern, and a lack of trained providers is a critical component of the inadequacy of surgical care worldwide. Competency-based training has been advanced in high-income countries, improving technical skills and decreasing training time, but it is poorly understood how this model might be applied to low- and middle-income countries. We describe the development of a competency-based program to accelerate specialty training of in-country providers in cleft surgery techniques. The program was designed and piloted among eight trainees at five international cleft lip and palate surgical mission sites in Latin America and Africa. A competency-based evaluation form, designed for the program, was utilized to grade general technical and procedure-specific competencies, and pre- and post-training scores were analyzed using a paired t test. Trainees demonstrated improvement in average procedure-specific competency scores for both lip repairs (60.4-71.0%, p < 0.01) and palate (50.6-66.0%, p < 0.01). General technical competency scores also improved (63.6-72.0%, p < 0.01). Among the procedural competencies assessed, surgical markings showed the greatest improvement (19.0 and 22.8% for lip and palate, respectively), followed by nasal floor/mucosal approximation (15.0%) and hard palate dissection (17.1%). Surgical delivery models in LMICs are varied, and trade-offs often exist between goals of case throughput, quality and training. Pilot program results show that procedure-specific and general technical competencies can be improved over a relatively short time and demonstrate the feasibility of incorporating such a training program into surgical outreach missions.

A Leadership Development Program for Surgeons: First-Year Participant Evaluation

PubMed Central

Pradarelli, Jason C.; Jaffe, Gregory A.; Lemak, Christy Harris; Mulholland, Michael W.; Dimick, Justin B.

2016-01-01

Structured Abstract Background In a dynamic healthcare system, strong leadership has never been more important for surgeons. Little is known about how to effectively design and conduct a leadership program specifically for surgeons. We sought to critically evaluate a Leadership Development Program for practicing surgeons by exploring the strengths and weaknesses of program components on surgeons’ development as physician-leaders. Methods At a large academic institution, we conducted semi-structured interviews with 21 surgical faculty members who voluntarily applied, were selected, and completed a newly-created Leadership Development Program in December 2012. Interview transcripts underwent qualitative descriptive analysis with thematic coding based on grounded theory. Themes were extracted regarding surgeons’ evaluations of the program on their development as physician-leaders. Results After completing the program, surgeons reported personal improvements in the following 4 areas: self-empowerment to lead, self-awareness, team-building skills, and business and leadership knowledge. Surgeons felt “more confident about stepping up as a leader” and more aware about “how others view me and my interactions.” They described a stronger grasp on “giving feedback” as well as “business/organizational issues.” Overall, surgeon participants reported positive impacts of the program on their day-to-day work activities, general career perspective, as well as their long-term career development plans. Surgeons also recommended areas for potential improvement for the program. Conclusions These interviews detailed self-reported improvements in leadership knowledge and capabilities for practicing surgeons who completed a Leadership Development Program. A curriculum designed specifically for surgeons may enable future programs to better equip surgeons for important leadership roles in a complex healthcare environment. PMID:27138180

Effective prevention programs for tobacco use.

PubMed

Pentz, M A

1999-01-01

Several types of prevention programs have shown effects on delaying or reducing youth tobacco use for periods of 1-5 years or more. These are referred to as evidence-based programs. However, they are not widely used. At the same time, with few exceptions, adolescent tobacco use rates have been stable or have increased in the 1990s. The challenge for prevention is to identify critical components shared by effective prevention programs--that is, components most associated with effect, and then to evaluate factors that are most likely to promote adoption, implementation, and diffusion of effective programs across schools and communities in the United States. Effective tobacco prevention programs focus on counteracting social influences on tobacco use, include either direct training of youth in resistance and assertiveness skills or, for policy and community organization interventions, direct or indirect (through adults) training in community activism, and are mainly theory-based, with an emphasis on three levels of theory: (a) personal (attitudes, normative expectations, and beliefs); (b) social (social or group behavior); and/or (c) environmental (communications and diffusion). Program effects increase with the use of booster sessions, standardized implementor training and support, multiple program components, and multiple levels of theory. Overall, multi-component community programs that have a school program as a basis, with supportive parent, media, and community organization components, have shown the most sustained effects on tobacco use. Positive program adoption by the school or community, extent and quality of program implementation, and existence of credible networks of leaders to promote the program are critical for any effect. Research on predictors of adoption, implementation, and diffusion of evidence-based programs is scanty relative to outcome research. In addition, more research is needed on why multi-component programs appear to be most effective, whether effect is related to existing tobacco policies, whether prevention programs have differential effects on youth with different natural trajectories of tobacco use, and whether prevention programs can be used to recruit smokers into cessation programs.

A comparative review of measurement instruments to inform and evaluate effectiveness of disability inclusive development.

PubMed

Goujon, Nicolas; Devine, Alexandra; Baker, Sally M; Sprunt, Beth; Edmonds, Tanya J; Booth, Jennifer K; Keeffe, Jill E

2014-01-01

A review of existing measurement instruments was conducted to examine their suitability to measure disability prevalence and assess quality of life, protection of disability rights and community participation by people with disabilities, specifically within the context of development programs in low and middle-income countries. From a search of PubMed and the grey literature, potentially relevant measurement instruments were identified and examined for their content and psychometric properties, where possible. Criteria for inclusion were: based on the WHO's International Classification of Functioning Disability and Health (ICF), used quantitative methods, suitable for population-based studies of disability inclusive development in English and published after 1990. Characteristics of existing instruments were analysed according to components of the ICF and quality of life domains. Ten instruments were identified and reviewed according to the criteria listed above. Each version of instruments was analysed separately. Only three instruments included a component on quality of life. Domains from the ICF that were addressed by some but not all instruments included the environment, technology and communication. The measurement instruments reviewed covered the range of elements required to measure disability-inclusion within development contexts. However no single measurement instrument has the capacity to measure both disability prevalence and changes in quality of life according to contemporary disability paradigms. The review of measurement instruments supports the need for developing an instrument specifically intended to measure disability inclusive practice within development programs. Implications for Rehabilitation Surveys and tools are needed to plan disability inclusive development. Existing measurement tools to determine prevalence of disability, wellbeing, rights and access to the community were reviewed. No single validated tool exists for population-based studies, uses quantitative methods and the components of the ICF to measure prevalence of disability, well-being of people with disability and their access to their communities. A measurement tool that reflects the UNCRPD and addresses all components of the ICF is needed to assist in disability inclusive development, especially in low and mid resource countries.

The National Institute on Disability, Independent Living, and Rehabilitation Research Burn Model System: Twenty Years of Contributions to Clinical Service and Research.

PubMed

Goverman, Jeremy; Mathews, Katie; Holavanahalli, Radha K; Vardanian, Andrew; Herndon, David N; Meyer, Walter J; Kowalske, Karen; Fauerbach, Jim; Gibran, Nicole S; Carrougher, Gretchen J; Amtmann, Dagmar; Schneider, Jeffrey C; Ryan, Colleen M

The National Institute on Disability, Independent Living, and Rehabilitation Research (NIDILRR) established the Burn Model System (BMS) in 1993 to improve the lives of burn survivors. The BMS program includes 1) a multicenter longitudinal database describing the functional and psychosocial recovery of burn survivors; 2) site-specific burn-related research; and 3) a knowledge dissemination component directed toward patients and providers. Output from each BMS component was analyzed. Database structure, content, and access procedures are described. Publications using the database were identified and categorized to illustrate the content area of the work. Unused areas of the database were identified for future study. Publications related to site-specific projects were cataloged. The most frequently cited articles are summarized to illustrate the scope of these projects. The effectiveness of dissemination activities was measured by quantifying website hits and information downloads. There were 25 NIDILRR-supported publications that utilized the database. These articles covered topics related to psychological outcomes, functional outcomes, community reintegration, and burn demographics. There were 172 site-specific publications; highly cited articles demonstrate a wide scope of study. For information dissemination, visits to the BMS website quadrupled between 2013 and 2014, with 124,063 downloads of educational material in 2014. The NIDILRR BMS program has played a major role in defining the course of burn recovery, and making that information accessible to the general public. The accumulating information in the database serves as a rich resource to the burn community for future study. The BMS is a model for collaborative research that is multidisciplinary and outcome focused.

Evaluating practical vs. theoretical inspection system capability with a new programmed defect test mask designed for 3X and 4X technology nodes

NASA Astrophysics Data System (ADS)

Glasser, Joshua; Pratt, Tim

2008-10-01

Programmed defect test masks serve the useful purpose of evaluating inspection system sensitivity and capability. It is widely recognized that when evaluating inspection system capability, it is important to understand the actual sensitivity of the inspection system in production; yet unfortunately we have observed that many test masks are a more accurate judge of theoretical sensitivity rather than real-world usable capability. Use of ineffective test masks leave the purchaser of inspection equipment open to the risks of over-estimating the capability of their inspection solution and overspecifying defect sensitivity to their customers. This can result in catastrophic yield loss for device makers. In this paper we examine some of the lithography-related technology advances which place an increasing burden on mask inspection complexity, such as MEEF, defect printability estimation, aggressive OPC, double patterning, and OPC jogs. We evaluate the key inspection system component contributors to successful mask inspection, including what can "go wrong" with these components. We designed and fabricated a test mask which both (a) more faithfully represents actual production use cases; and (b) stresses the key components of the inspection system. This mask's patterns represent 32nm, 36nm, and 45nm logic and memory technology including metal and poly like background patterns with programmed defects. This test mask takes into consideration requirements of advanced lithography, such as MEEF, defect printability, assist features, nearly-repetitive patterns, and data preparation. This mask uses patterns representative of 32nm, 36nm, and 45nm logic, flash, and DRAM technology. It is specifically designed to have metal and poly like background patterns with programmed defects. The mask is complex tritone and was designed for annular immersion lithography.

How Does Attention Relate to the Ability-Specific and Position-Specific Components of Reasoning Measured by APM?

ERIC Educational Resources Information Center

Ren, Xuezhu; Goldhammer, Frank; Moosbrugger, Helfried; Schweizer, Karl

2012-01-01

The aim of the present study was to clarify the nature of the ability-specific and position-specific components of Raven's Advanced Progressive Matrices (APM) by relating them to a number of types of attention. The ability-specific component represents the constant part of cognitive performance whereas the position-specific component reflects the…

The Evaluation and Research of Multi-Project Programs: Program Component Analysis.

ERIC Educational Resources Information Center

Baker, Eva L.

1977-01-01

It is difficult to base evaluations on concepts irrelevant to state policy making. Evaluation of a multiproject program requires both time and differentiation of method. Data from the California Early Childhood Program illustrate process variables for program component analysis, and research questions for intraprogram comparison. (CP)

Gene–Physical Activity Interactions: Overview of Human Studies

PubMed Central

Rankinen, Tuomo; Bouchard, Claude

2009-01-01

Physical activity level is an important component of the total daily energy expenditure and as such contributes to body weight regulation. A body of data indicates that the level of physical activity plays a role in the risk of excessive weight gain, in weight loss programs, and particularly in the prevention of weight regain. Most studies dealing with potential gene–physical activity interaction effects use an exercise and fitness or performance paradigm as opposed to an obesity-driven model. From these studies, it is clear that there are considerable individual differences in the response to an exercise regimen and that there is a substantial familial aggregation component to the observed heterogeneity. Few studies have focused on the role of specific genes in accounting for the highly prevalent gene–exercise interaction effects. Results for specific genes have been inconsistent with few exceptions. Progress is likely to come when studies will be designed to truly address gene–exercise or physical activity interaction issues and with sample sizes that will provide adequate statistical power. PMID:19037212

Packaging strategies for printed circuit board components. Volume I, materials & thermal stresses.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neilsen, Michael K.; Austin, Kevin N.; Adolf, Douglas Brian

2011-09-01

Decisions on material selections for electronics packaging can be quite complicated by the need to balance the criteria to withstand severe impacts yet survive deep thermal cycles intact. Many times, material choices are based on historical precedence perhaps ignorant of whether those initial choices were carefully investigated or whether the requirements on the new component match those of previous units. The goal of this program focuses on developing both increased intuition for generic packaging guidelines and computational methodologies for optimizing packaging in specific components. Initial efforts centered on characterization of classes of materials common to packaging strategies and computational analysesmore » of stresses generated during thermal cycling to identify strengths and weaknesses of various material choices. Future studies will analyze the same example problems incorporating the effects of curing stresses as needed and analyzing dynamic loadings to compare trends with the quasi-static conclusions.« less

Development of advanced high temperature in-cylinder components and tribological systems for low heat rejection diesel engines, phase 1

NASA Astrophysics Data System (ADS)

Kroeger, C. A.; Larson, H. J.

1992-03-01

Analysis and concept design work completed in Phase 1 have identified a low heat rejection engine configuration with the potential to meet the Heavy Duty Transport Technology program specific fuel consumption goal of 152 g/kW-hr. The proposed engine configuration incorporates low heat rejection, in-cylinder components designed for operation at 24 MPa peak cylinder pressure. Water cooling is eliminated by selective oil cooling of the components. A high temperature lubricant will be required due to increased in-cylinder operating temperatures. A two-stage turbocharger air system with intercooling and aftercooling was selected to meet engine boost and BMEP requirements. A turbocompound turbine stage is incorporated for exhaust energy recovery. The concept engine cost was estimated to be 43 percent higher compared to a Caterpillar 3176 engine. The higher initial engine cost is predicted to be offset by reduced operating costs due the lower fuel consumption.

Cell module and fuel conditioner development

NASA Astrophysics Data System (ADS)

Hoover, D. Q., Jr.

1980-01-01

Components for the first 5 cell stack (no cooling plates) of the MK-2 design were fabricated. Preliminary specfications and designs for the components of a 23 cell MK-1 stack with four DIGAS cooling plates were developed. The MK-2 was selected as a bench mark design and a preliminary design of the facilities required for high rate manufacture of fuel cell modules was developed. Two stands for testing 5 cell stacks were built and design work for modifying existing stands and building new stands for 23 and 80 cell stacks was initiated. Design and procurement of components and materials for the catalyst test stand were completed and construction initiated. Work on the specifications of pipeline gas, tap water and recovered water and definition of equipment required for treatment was initiated. An innovative geometry for the reformer was conceived and modifications of the computer program to be used in its design were stated.

Development of advanced high temperature in-cylinder components and tribological systems for low heat rejection diesel engines, phase 1

NASA Technical Reports Server (NTRS)

Kroeger, C. A.; Larson, H. J.

1992-01-01

Analysis and concept design work completed in Phase 1 have identified a low heat rejection engine configuration with the potential to meet the Heavy Duty Transport Technology program specific fuel consumption goal of 152 g/kW-hr. The proposed engine configuration incorporates low heat rejection, in-cylinder components designed for operation at 24 MPa peak cylinder pressure. Water cooling is eliminated by selective oil cooling of the components. A high temperature lubricant will be required due to increased in-cylinder operating temperatures. A two-stage turbocharger air system with intercooling and aftercooling was selected to meet engine boost and BMEP requirements. A turbocompound turbine stage is incorporated for exhaust energy recovery. The concept engine cost was estimated to be 43 percent higher compared to a Caterpillar 3176 engine. The higher initial engine cost is predicted to be offset by reduced operating costs due the lower fuel consumption.

Subsystems component definitions summary program

NASA Technical Reports Server (NTRS)

Scott, A. Don; Thomas, Carolyn C.; Simonsen, Lisa C.; Hall, John B., Jr.

1991-01-01

A computer program, the Subsystems Component Definitions Summary (SUBCOMDEF), was developed to provide a quick and efficient means of summarizing large quantities of subsystems component data in terms of weight, volume, resupply, and power. The program was validated using Space Station Freedom Program Definition Requirements Document data for the internal and external thermal control subsystem. Once all component descriptions, unit weights and volumes, resupply, and power data are input, the user may obtain a summary report of user-specified portions of the subsystem or of the entire subsystem as a whole. Any combination or all of the parameters of wet and dry weight, wet and dry volume, resupply weight and volume, and power may be displayed. The user may vary the resupply period according to individual mission requirements, as well as the number of hours per day power consuming components operate. Uses of this program are not limited only to subsystem component summaries. Any applications that require quick, efficient, and accurate weight, volume, resupply, or power summaries would be well suited to take advantage of SUBCOMDEF's capabilities.

Components of cultural competence in three mental health programs.

PubMed

Siegel, Carole; Haugland, Gary; Reid-Rose, Lenora; Hopper, Kim

2011-06-01

The aim of this study was to identify components of cultural competence in mental health programs developed for cultural groups by community and mental health professionals from these groups. Three programs were studied: a prevention program primarily serving African-American and Afro-Caribbean youth, a Latino adult acute inpatient unit, and a Chinese day treatment program in a community-based agency. Nine study-trained field researchers used a semistructured instrument that captures program genealogy, structure, processes, and cultural infusion. Program cultural elements were identified from field notes and from individual and group interviews of consumers and staff (N=104). A research-group consensus process with feedback from program staff was used to group elements by shared characteristics into the program components of cultural competence. Components included communication competencies (with use of colloquialisms and accepted forms of address); staff in culturally acceptable roles; culturally framed trust building (such as pairing youths with mentors), stigma reduction, friendly milieus (such as serving culturally familiar foods and playing music popular with the culture), and services; and peer, family, and community involvement (including use of peer counselors and mentors, hosting parent weekends, and linking clients with senior center and community services). Incorporating these components into any program in which underserved cultural populations are seen is recommended for improving cultural competence.