The Guardian: The Source for Antiterrorism Information. Volume 9, Number 1, April 2007

DTIC Science & Technology

2007-04-01

the fuel in these research reactors is generally not highly radioactive . Unlike the fuel rods in a nuclear power plant, these fuel elements would...NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...practices and lessons learned. In addition, we will include Service and issue-specific breakout sessions that will focus on critical AT program elements

Control of small phased-array antennas

NASA Technical Reports Server (NTRS)

Doland, G. D.

1978-01-01

Series of reports, patent descriptions, calculator programs, and other literature describes antenna control and steering apparatus for seven-element phased array. Though series contains information specific to particular system, it illustrates methods that can be applied to antennas with greater or fewer numbers of elements. Included are programs for calculating beam parameters and design functions and information to interfacing digital controller to beam-steering apparatus.

Yarning about fall prevention: community consultation to discuss falls and appropriate approaches to fall prevention with older Aboriginal and Torres Strait Islander people.

PubMed

Lukaszyk, Caroline; Coombes, Julieann; Turner, Norma Jean; Hillmann, Elizabeth; Keay, Lisa; Tiedemann, Anne; Sherrington, Cathie; Ivers, Rebecca

2017-08-01

Fall related injury is an emerging issue for older Indigenous people worldwide, yet few targeted fall prevention programs are currently available for Indigenous populations. In order to inform the development of a new Aboriginal-specific fall prevention program in Australia, we conducted community consultation with older Aboriginal people to identify perceptions and beliefs about falls, and to identify desired program elements. Yarning Circles were held with Aboriginal and Torres Strait Islander people aged 45 years and over. Each Yarning Circle was facilitated by an Aboriginal researcher who incorporated six indicative questions into each discussion. Questions explored the impact of falls on Yarning Circle participants, their current use of fall prevention services and investigated Yarning Circle participant's preferences regarding the design and mode of delivery of a fall prevention program. A total of 76 older Aboriginal people participated in ten Yarning Circles across six sites in the state of New South Wales. Participants associated falls with physical disability, a loss of emotional well-being and loss of connection to family and community. Many participants did not use existing fall prevention services due to a lack of availability in their area, having no referral provided by their GP and/or being unaware of fall prevention programs in general. Program elements identified as important by participants were that it be Aboriginal-specific, group-based, and on-going, with the flexibility to be tailored to specific communities, with free transport provided to and from the program. Older Aboriginal people reported falls to be a priority health issue, with a significant impact on their health and well-being. Few older Aboriginal people accessed prevention programs, suggesting there is an important need for targeted Aboriginal-specific programs. A number of important program elements were identified which if incorporated into prevention programs, may help to address the rising burden of falls.

Documentation of a graphical display program for the saturated- unsaturated transport (SUTRA) finite-element simulation model

USGS Publications Warehouse

Souza, W.R.

1987-01-01

This report documents a graphical display program for the U. S. Geological Survey finite-element groundwater flow and solute transport model. Graphic features of the program, SUTRA-PLOT (SUTRA-PLOT = saturated/unsaturated transport), include: (1) plots of the finite-element mesh, (2) velocity vector plots, (3) contour plots of pressure, solute concentration, temperature, or saturation, and (4) a finite-element interpolator for gridding data prior to contouring. SUTRA-PLOT is written in FORTRAN 77 on a PRIME 750 computer system, and requires Version 9.0 or higher of the DISSPLA graphics library. The program requires two input files: the SUTRA input data list and the SUTRA simulation output listing. The program is menu driven and specifications for individual types of plots are entered and may be edited interactively. Installation instruction, a source code listing, and a description of the computer code are given. Six examples of plotting applications are used to demonstrate various features of the plotting program. (Author 's abstract)

Distilling Common History and Practice Elements to Inform Dissemination: Hanf-Model BPT Programs as an Example

PubMed Central

Kaehler, Laura A.; Jacobs, Mary; Jones, Deborah J.

2016-01-01

There is a shift in evidence-based practice toward an understanding of the treatment elements that characterize empirically-supported interventions in general and the core components of specific approaches in particular. The evidence-base for Behavioral Parent Training (BPT), the standard of care for early-onset disruptive behavior disorders (Oppositional Defiant Disorder and Conduct Disorder), which frequently co-occur with Attention Deficit Hyperactivity Disorder, is well-established; yet, an ahistorical, program-specific lens tells little regarding how leaders, including Constance Hanf at the University of Oregon, shaped the common practice elements of contemporary evidence-based BPT. Accordingly, this review summarizes the formative work of Hanf, as well as the core elements, evolution, and extensions of her work, represented in Community Parent Education (COPE; Cunningham, Bremner, & Boyle, 1995; Cunningham, Bremner, Secord, & Harrison, 2009), Defiant Children (DC; Barkley 1987; Barkley, 2013), Helping the Noncompliant Child (HNC; Forehand & McMahon, 1981; McMahon & Forehand, 2003), Parent-Child Interaction Therapy (PCIT; Eyberg, & Robinson, 1982; Eyberg, 1988; Eyberg & Funderburk, 2011), and the Incredible Years (IY; Webster-Stratton, 1981; 1982; 2008). Our goal is not to provide an exhaustive review of the evidence-base for the Hanf-Model programs; rather, our intention is to provide a template of sorts from which agencies and clinicians can make informed choices about how and why they are using one program versus another, as well as how to make inform flexible use one program or combination of practice elements across programs, to best meet the needs of child clients and their families. Clinical implications and directions for future work are discussed. PMID:27389606

DESAP 1: A structural design program with stress and displacement constraints. Volume 1: Theoretical and user's manual

NASA Technical Reports Server (NTRS)

Kiusalaas, J.; Reddy, G. B.

1977-01-01

A finite element program is presented for computer-automated, minimum weight design of elastic structures with constraints on stresses (including local instability criteria) and displacements. Volume 1 of the report contains the theoretical and user's manual of the program. Sample problems and the listing of the program are included in Volumes 2 and 3. The element subroutines are organized so as to facilitate additions and changes by the user. As a result, a relatively minor programming effort would be required to make DESAP 1 into a special purpose program to handle the user's specific design requirements and failure criteria.

Producing a College Video: The Sweat (and Success) Is in the Details.

ERIC Educational Resources Information Center

Hays, Tim

1994-01-01

Introduces specifics related to production elements and message elements of college videos. Outlines aspects of lighting, audio, narration, backing music, and performance music. Discusses elements of pace, physical plant, people, and programs with regard to marketing. Suggests the goal is to create a unified vision to attract the target audience.…

Modular space station Phase B extension preliminary performance specification. Volume 2: Project

NASA Technical Reports Server (NTRS)

1971-01-01

The four systems of the modular space station project are described, and the interfaces between this project and the shuttle project, the tracking and data relay satellite project, and an arbitrarily defined experiment project are defined. The experiment project was synthesized from internal experiments, detached research and application modules, and attached research and application modules to derive a set of interface requirements which will support multiple combinations of these elements expected during the modular space station mission. The modular space station project element defines a 6-man orbital program capable of growth to a 12-man orbital program capability. The modular space station project element specification defines the modular space station system, the premission operations support system, the mission operations support system, and the cargo module system and their interfaces.

Data systems elements technology assessment and system specifications, issue no. 2. [nasa programs

NASA Technical Reports Server (NTRS)

1978-01-01

The ability to satisfy the objectives of future NASA Office of Applications programs is dependent on technology advances in a number of areas of data systems. The hardware and software technology of end-to-end systems (data processing elements through ground processing, dissemination, and presentation) are examined in terms of state of the art, trends, and projected developments in the 1980 to 1985 timeframe. Capability is considered in terms of elements that are either commercially available or that can be implemented from commercially available components with minimal development.

Solid/FEM integration at SNLA

NASA Technical Reports Server (NTRS)

Chavez, Patrick F.

1987-01-01

The effort at Sandia National Labs. on the methodologies and techniques being used to generate strict hexahedral finite element meshes from a solid model is described. The functionality of the modeler is used to decompose the solid into a set of nonintersecting meshable finite element primitives. The description of the decomposition is exported, via a Boundary Representative format, to the meshing program which uses the information for complete finite element model specification. Particular features of the program are discussed in some detail along with future plans for development which includes automation of the decomposition using artificial intelligence techniques.

Autonomy Level Specification for Intelligent Autonomous Vehicles

DTIC Science & Technology

2003-09-01

Autonomy Level Specification for Intelligent Autonomous Vehicles : Interim Progress Report Hui-Min Huang, Elena Messina, James Albus...Level Specification for Intelligent Autonomous Vehicles : Interim Progress Report 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

An Air Force Guide to the System Specification.

DTIC Science & Technology

1981-01-01

basis for sound management plans and decisions to initiate system full-scale development. Related topics include: current problems and questions...such current documents as AFR 800-2 and AFR 57-1. Key elements of coverage include the following: a. Levels of system engineering studies are...equipment and computer program elements of a system are acquired most directly acainst lower-level (configuration item) specifications. b. Current

Technical Specifications for Hardware and Software, and Maintenance in Support of Computer Literacy Program. Volume II.

ERIC Educational Resources Information Center

District of Columbia Public Schools, Washington, DC.

Designed for use by vendors, this guide provides an overview of the objectives for the 5-year computer literacy program to be implemented in the District of Columbia Public Schools; outlines requirements which are mandatory elements of vendors' bids unless explicitly designated "desirable"; and details specifications for computing…

NASA helicopter transmission system technology program

NASA Technical Reports Server (NTRS)

Zaretsky, E. V.

1983-01-01

The purpose of the NASA Helicopter Transmission System Technology Program is to improve specific mechanical components and the technology for combining these into advanced drive systems to make helicopters more viable and cost competitive for commerical applications. The history, goals, and elements of the program are discussed.

Comparisons of node-based and element-based approaches of assigning bone material properties onto subject-specific finite element models.

PubMed

Chen, G; Wu, F Y; Liu, Z C; Yang, K; Cui, F

2015-08-01

Subject-specific finite element (FE) models can be generated from computed tomography (CT) datasets of a bone. A key step is assigning material properties automatically onto finite element models, which remains a great challenge. This paper proposes a node-based assignment approach and also compares it with the element-based approach in the literature. Both approaches were implemented using ABAQUS. The assignment procedure is divided into two steps: generating the data file of the image intensity of a bone in a MATLAB program and reading the data file into ABAQUS via user subroutines. The node-based approach assigns the material properties to each node of the finite element mesh, while the element-based approach assigns the material properties directly to each integration point of an element. Both approaches are independent from the type of elements. A number of FE meshes are tested and both give accurate solutions; comparatively the node-based approach involves less programming effort. The node-based approach is also independent from the type of analyses; it has been tested on the nonlinear analysis of a Sawbone femur. The node-based approach substantially improves the level of automation of the assignment procedure of bone material properties. It is the simplest and most powerful approach that is applicable to many types of analyses and elements. Copyright © 2015 IPEM. Published by Elsevier Ltd. All rights reserved.

International Review of the Development and Implementation of Energy Efficiency Standards and Labeling Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; Zheng, Nina; Fridley, David

2012-02-28

Appliance energy efficiency standards and labeling (S&L) programs have been important policy tools for regulating the efficiency of energy-using products for over 40 years and continue to expand in terms of geographic and product coverage. The most common S&L programs include mandatory minimum energy performance standards (MEPS) that seek to push the market for efficient products, and energy information and endorsement labels that seek to pull the market. This study seeks to review and compare some of the earliest and most well-developed S&L programs in three countries and one region: the U.S. MEPS and ENERGY STAR, Australia MEPS and Energymore » Label, European Union MEPS and Ecodesign requirements and Energy Label and Japanese Top Runner programs. For each program, key elements of S&L programs are evaluated and comparative analyses across the programs undertaken to identify best practice examples of individual elements as well as cross-cutting factors for success and lessons learned in international S&L program development and implementation. The international review and comparative analysis identified several overarching themes and highlighted some common factors behind successful program elements. First, standard-setting and programmatic implementation can benefit significantly from a legal framework that stipulates a specific timeline or schedule for standard-setting and revision, product coverage and legal sanctions for non-compliance. Second, the different MEPS programs revealed similarities in targeting efficiency gains that are technically feasible and economically justified as the principle for choosing a standard level, in many cases at a level that no product on the current market could reach. Third, detailed survey data such as the U.S. Residential Energy Consumption Survey (RECS) and rigorous analyses provide a strong foundation for standard-setting while incorporating the participation of different groups of stakeholders further strengthen the process. Fourth, sufficient program resources for program implementation and evaluation are critical to the effectiveness of standards and labeling programs and cost-sharing between national and local governments can help ensure adequate resources and uniform implementation. Lastly, check-testing and punitive measures are important forms of enforcement while the cancellation of registration or product sales-based fines have also proven effective in reducing non-compliance. The international comparative analysis also revealed the differing degree to which the level of government decentralization has influenced S&L programs and while no single country has best practices in all elements of standards and labeling development and implementation, national examples of best practices for specific elements do exist. For example, the U.S. has exemplified the use of rigorous analyses for standard-setting and robust data source with the RECS database while Japan's Top Runner standard-setting principle has motivated manufacturers to exceed targets. In terms of standards implementation and enforcement, Australia has demonstrated success with enforcement given its long history of check-testing and enforcement initiatives while mandatory information-sharing between EU jurisdictions on compliance results is another important enforcement mechanism. These examples show that it is important to evaluate not only the drivers of different paths of standards and labeling development, but also the country-specific context for best practice examples in order to understand how and why certain elements of specific S&L programs have been effective.« less

Reference earth orbital research and applications investigations (blue book). Volume 7: Technology

NASA Technical Reports Server (NTRS)

1971-01-01

The candidate experiment program for manned space stations with specific application to technology disciplines is presented. The five functional program elements are devoted to the development of new technology for application to future generation spacecraft and experiments. The functional program elements are as follows: (1) monitor and trace movement of external contaminants to determine methods for controlling contamination, (2) analysis of fundamentals of fluid systems management, (3) extravehicular activity, (4) advanced spacecraft systems tests, and (5) development of teleoperator system for use with space activities.

Essential elements of self-help/minimal intervention strategies for smoking cessation.

PubMed

Glynn, T J; Boyd, G M; Gruman, J C

1990-01-01

Two decades of research suggest that self-help/minimal intervention strategies for smoking cessation may be the preferred means by which smokers stop and can produce success rates approximating those of more formal programs, at lower cost and with greater access to relevant populations. In order to make the best possible use of these self-help/minimal intervention approaches, the National Cancer Institute (NCI) supported a series of randomized, controlled intervention trials and, in June of 1988, convened an Expert Advisory Panel to address the question "What are the essential elements of self-help/minimal intervention strategies for smoking cessation?". The panel's recommendations were that: (1) Intervention efforts should focus on increasing smokers' motivations to make serious quit attempts; (2) Delivery of programs be broadened to include all smokers; (3) Programs be targeted to stages of cessation and specific populations; (4) All programs include (a) elements focused on health and social consequences of smoking, and (b) strategies and exercises aimed at quitting, maintenance of nonsmoking, relapse prevention, and recycling; (5) Materials and programs be made widely available rather than "fine tuning" existing programs or developing new ones; and (6) Programs make use of specific adjunctive strategies. In this way, a reacceleration of the decline in smoking prevalence may be realized in the 1990s and significantly contribute to the NCI's Year 2000 goals and the Surgeon General's aim of a smoke-free society.

24 CFR 3286.505 - Minimum elements to be inspected.

Code of Federal Regulations, 2010 CFR

2010-04-01

... with respect to home design and construction; (b) Consideration of site-specific conditions; (c) Site... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME INSTALLATION PROGRAM Inspection of Installations in HUD-Administered States § 3286.505 Minimum elements to be inspected. The installation of every manufactured home...

Computational exploration of cis-regulatory modules in rhythmic expression data using the "Exploration of Distinctive CREs and CRMs" (EDCC) and "CRM Network Generator" (CNG) programs.

PubMed

Bekiaris, Pavlos Stephanos; Tekath, Tobias; Staiger, Dorothee; Danisman, Selahattin

2018-01-01

Understanding the effect of cis-regulatory elements (CRE) and clusters of CREs, which are called cis-regulatory modules (CRM), in eukaryotic gene expression is a challenge of computational biology. We developed two programs that allow simple, fast and reliable analysis of candidate CREs and CRMs that may affect specific gene expression and that determine positional features between individual CREs within a CRM. The first program, "Exploration of Distinctive CREs and CRMs" (EDCC), correlates candidate CREs and CRMs with specific gene expression patterns. For pairs of CREs, EDCC also determines positional preferences of the single CREs in relation to each other and to the transcriptional start site. The second program, "CRM Network Generator" (CNG), prioritizes these positional preferences using a neural network and thus allows unbiased rating of the positional preferences that were determined by EDCC. We tested these programs with data from a microarray study of circadian gene expression in Arabidopsis thaliana. Analyzing more than 1.5 million pairwise CRE combinations, we found 22 candidate combinations, of which several contained known clock promoter elements together with elements that had not been identified as relevant to circadian gene expression before. CNG analysis further identified positional preferences of these CRE pairs, hinting at positional information that may be relevant for circadian gene expression. Future wet lab experiments will have to determine which of these combinations confer daytime specific circadian gene expression.

Computational exploration of cis-regulatory modules in rhythmic expression data using the “Exploration of Distinctive CREs and CRMs” (EDCC) and “CRM Network Generator” (CNG) programs

PubMed Central

Staiger, Dorothee

2018-01-01

Understanding the effect of cis-regulatory elements (CRE) and clusters of CREs, which are called cis-regulatory modules (CRM), in eukaryotic gene expression is a challenge of computational biology. We developed two programs that allow simple, fast and reliable analysis of candidate CREs and CRMs that may affect specific gene expression and that determine positional features between individual CREs within a CRM. The first program, “Exploration of Distinctive CREs and CRMs” (EDCC), correlates candidate CREs and CRMs with specific gene expression patterns. For pairs of CREs, EDCC also determines positional preferences of the single CREs in relation to each other and to the transcriptional start site. The second program, “CRM Network Generator” (CNG), prioritizes these positional preferences using a neural network and thus allows unbiased rating of the positional preferences that were determined by EDCC. We tested these programs with data from a microarray study of circadian gene expression in Arabidopsis thaliana. Analyzing more than 1.5 million pairwise CRE combinations, we found 22 candidate combinations, of which several contained known clock promoter elements together with elements that had not been identified as relevant to circadian gene expression before. CNG analysis further identified positional preferences of these CRE pairs, hinting at positional information that may be relevant for circadian gene expression. Future wet lab experiments will have to determine which of these combinations confer daytime specific circadian gene expression. PMID:29298348

SDMS: A scientific data management system

NASA Technical Reports Server (NTRS)

Massena, W. A.

1978-01-01

SDMS is a data base management system developed specifically to support scientific programming applications. It consists of a data definition program to define the forms of data bases, and FORTRAN-compatible subroutine calls to create and access data within them. Each SDMS data base contains one or more data sets. A data set has the form of a relation. Each column of a data set is defined to be either a key or data element. Key elements must be scalar. Data elements may also be vectors or matrices. The data elements in each row of the relation form an element set. SDMS permits direct storage and retrieval of an element set by specifying the corresponding key element values. To support the scientific environment, SDMS allows the dynamic creation of data bases via subroutine calls. It also allows intermediate or scratch data to be stored in temporary data bases which vanish at job end.

Alumni Perspectives on Career Preparation during a Postdoctoral Training Program: A Qualitative Study

ERIC Educational Resources Information Center

Faupel-Badger, Jessica M.; Raue, Kimberley; Nelson, David E.; Tsakraklides, Sophia

2015-01-01

Published evaluations of career preparation of alumni from long-standing postdoctoral fellowship programs in the biomedical sciences are limited and often focus on quantitative analysis of data from extant publicly available sources. Qualitative methods provide the opportunity to gather robust information about specific program elements from…

40 CFR 51.372 - State Implementation Plan submissions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... compliance; (5) Legal authority requiring or allowing implementation of the I/M program and providing either broad or specific authority to perform all required elements of the program; (6) Legal authority for I/M... without an I/M program is approved by EPA); (7) Implementing regulations, interagency agreements, and...

40 CFR 51.372 - State Implementation Plan submissions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... compliance; (5) Legal authority requiring or allowing implementation of the I/M program and providing either broad or specific authority to perform all required elements of the program; (6) Legal authority for I/M... without an I/M program is approved by EPA); (7) Implementing regulations, interagency agreements, and...

40 CFR 51.372 - State Implementation Plan submissions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... compliance; (5) Legal authority requiring or allowing implementation of the I/M program and providing either broad or specific authority to perform all required elements of the program; (6) Legal authority for I/M... without an I/M program is approved by EPA); (7) Implementing regulations, interagency agreements, and...

40 CFR 51.372 - State Implementation Plan submissions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... compliance; (5) Legal authority requiring or allowing implementation of the I/M program and providing either broad or specific authority to perform all required elements of the program; (6) Legal authority for I/M... without an I/M program is approved by EPA); (7) Implementing regulations, interagency agreements, and...

Labor Market Assessments: An Essential Data Element for Program Development and Evaluation.

ERIC Educational Resources Information Center

Friedel, Janice N.

The Eastern Iowa Community College District (EICCD) has conducted labor market assessments in 17 occupations related to its programs. These assessments are an integral component of the EICCD program evaluation process. These assessments provide valuable information in the specific occupational areas regarding (1) characteristics of the local…

Program for the exploitation of unused NASA patents

NASA Technical Reports Server (NTRS)

Fay, R. J.

1972-01-01

The program to exploit unused NASA patents through the use of a multidisciplinary approach involving faculty students, and research staff is reported. NASA patents were screened for their applicability outside the space program, specific applications were identified, and the technical and commercial feasibility of these applications was established. Also application of this technology by governmental agencies outside the space program was sought. The program was specifically interested in energy absorbing devices such as those developed for lunar soft landings. These energy absorbing devices absorb large amounts of mechanical energy but are, in general, not reusable. Some of these devices can also operate as structural elements until their structural load capacity is exceeded and they become activated as energy absorbers. The capability of these devices to operate as structural elements and as energy absorbing devices makes them candidates for many applications in the fields of transportation and materials handling safety where accidents take a large toll in human injury and property damage.

Overview of Marshall Space Flight Center Activities for the Combustion Stability Tool Development Program

NASA Technical Reports Server (NTRS)

Kenny, R. J.; Greene, W. D.

2016-01-01

This presentation covers the overall scope, schedule, and activities associated with the NASA - Marshall Space Flight Center (MSFC) involvement with the Combustion Stability Tool Development (CSTD) program. The CSTD program is funded by the Air Force Space & Missile Systems Center; it is approximately two years in duration and; and it is sponsoring MSFC to: design, fabricate, & execute multi-element hardware testing, support Air Force Research Laboratory (AFRL) single element testing, and execute testing of a small-scale, multi-element combustion chamber. Specific MSFC Engineering Directorate involvement, per CSTD-sponsored task, will be outlined. This presentation serves a primer for the corresponding works that provide details of the technical work performed by individual groups within MSFC.

Shortening the Miles to the Milestones: Connecting EPA-Based Evaluations to ACGME Milestone Reports for Internal Medicine Residency Programs.

PubMed

Choe, John H; Knight, Christopher L; Stiling, Rebekah; Corning, Kelli; Lock, Keli; Steinberg, Kenneth P

2016-07-01

The Next Accreditation System requires internal medicine training programs to provide the Accreditation Council for Graduate Medical Education (ACGME) with semiannual information about each resident's progress in 22 subcompetency domains. Evaluation of resident "trustworthiness" in performing entrustable professional activities (EPAs) may offer a more tangible assessment construct than evaluations based on expectations of usual progression toward competence. However, translating results from EPA-based evaluations into ACGME milestone progress reports has proven to be challenging because the constructs that underlay these two systems differ.The authors describe a process to bridge the gap between rotation-specific EPA-based evaluations and ACGME milestone reporting. Developed at the University of Washington in 2012 and 2013, this method involves mapping EPA-based evaluation responses to "milestone elements," the narrative descriptions within the columns of each of the 22 internal medicine subcompetencies. As faculty members complete EPA-based evaluations, the mapped milestone elements are automatically marked as "confirmed." Programs can maintain a database that tallies the number of times each milestone element is confirmed for a resident; these data can be used to produce graphical displays of resident progress along the internal medicine milestones.Using this count of milestone elements allows programs to bridge the gap between faculty assessments of residents based on rotation-specific observed activities and semiannual ACGME reports based on the internal medicine milestones. Although potentially useful for all programs, this method is especially beneficial to large programs where clinical competency committee members may not have the opportunity for direct observation of all residents.

Implementation of context independent code on a new array processor: The Super-65

NASA Technical Reports Server (NTRS)

Colbert, R. O.; Bowhill, S. A.

1981-01-01

The feasibility of rewriting standard uniprocessor programs into code which contains no context-dependent branches is explored. Context independent code (CIC) would contain no branches that might require different processing elements to branch different ways. In order to investigate the possibilities and restrictions of CIC, several programs were recoded into CIC and a four-element array processor was built. This processor (the Super-65) consisted of three 6502 microprocessors and the Apple II microcomputer. The results obtained were somewhat dependent upon the specific architecture of the Super-65 but within bounds, the throughput of the array processor was found to increase linearly with the number of processing elements (PEs). The slope of throughput versus PEs is highly dependent on the program and varied from 0.33 to 1.00 for the sample programs.

Opportunities for Small Satellites in NASA's Earth System Science Pathfinder (ESSP) Program

NASA Technical Reports Server (NTRS)

Peri, Frank; Law, Richard C.; Wells, James E.

2014-01-01

NASA's Earth Venture class (EV) of missions are competitively selected, Principal Investigator (PI) led, relatively low cost and narrowly focused in scientific scope. Investigations address a full spectrum of earth science objectives, including studies of the atmosphere, oceans, land surface, polar ice regions, and solid Earth. EV has three program elements: EV-Suborbital (EVS) are suborbital/airborne investigations; EV-Mission (EVM) element comprises small complete spaceborne missions; and EV-Instrument (EVI) element develops spaceborne instruments for flight as Missions-of-Opportunity (MoO). To ensure the success of EV, frequent opportunities for selecting missions has been established in NASA's Earth Science budget. This paper will describe those opportunities and how the management approach of each element is tailored according to the specific needs of the element.

Improved Design of Tunnel Supports : Volume 3 : Finite Element Analysis of the Peachtree Center Station in Atlanta

DOT National Transportation Integrated Search

1980-06-01

Volume 3 contains the application of the three-dimensional (3-D) finite element program, Automatic Dynamic Incremental Nonlinear Analysis (ADINA), which was designed to replace the traditional 2-D plane strain analysis, to a specific location. The lo...

COSMIC: Software catalog 1991 edition diskette format

NASA Technical Reports Server (NTRS)

1991-01-01

The PC edition of the annual COSMIC Software contains descriptions of the over 1,200 computer programs available for use within the United States as of January 1, 1991. By using the PC version of the catalog, it is possible to conduct extensive searches of the software inventory for programs that meet specific criteria. Elements such as program keywords, hardware specifications, source code languages, and title acronyms can be used for the basis of such searches. After isolating those programs that might be of best interest to the user, it is then possible to either view at the monitor, or generate a hardcopy listing of all information on those packages. In addition to the program elements that the user can search on, information such as total program size, distribution media, and program price, as well as extensive abstracts on the program, are also available to the user at this time. Another useful feature of the catalog allows for the retention of programs that meet certain search criteria between individual sessions of using the catalog. This allows users to save the information on those programs that are of interest to them in different areas of application. They can then recall a specific collection of programs for information retrieval or further search reduction if desired. In addition, this version of the catalog is adaptable to a network/shared resource environment, allowing multiple users access to a single copy of the catalog database simultaneously.

Promoting Transfer of Learning: Connecting General Education Courses

ERIC Educational Resources Information Center

Benander, Ruth; Lightner, Robin

2005-01-01

General education programs rely on students transferring learning from one context to another. This transfer cannot be taken for granted. Faculty must see individual courses as elements of a larger experience and focus on specific techniques promoting transfer. Classroom experiences serve to illustrate the elements of transfer that require…

Selective, Embedded, Just-In-Time Specialization (SEJITS): Portable Parallel Performance from Sequential, Productive, Embedded Domain-Specific Languages

DTIC Science & Technology

2012-12-01

identity operation SIMD Single instruction, multiple datastream parallel computing Scala A byte-compiled programming language featuring dynamic type...Specific Languages 5a. CONTRACT NUMBER FA8750-10-1-0191 5b. GRANT NUMBER N/A 5c. PROGRAM ELEMENT NUMBER 61101E 6. AUTHOR(S) Armando Fox 5d...application performance, but usually must rely on efficiency programmers who are experts in explicit parallel programming to achieve it. Since such efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buttler, D J

The Java Metadata Facility is introduced by Java Specification Request (JSR) 175 [1], and incorporated into the Java language specification [2] in version 1.5 of the language. The specification allows annotations on Java program elements: classes, interfaces, methods, and fields. Annotations give programmers a uniform way to add metadata to program elements that can be used by code checkers, code generators, or other compile-time or runtime components. Annotations are defined by annotation types. These are defined the same way as interfaces, but with the symbol {at} preceding the interface keyword. There are additional restrictions on defining annotation types: (1) Theymore » cannot be generic; (2) They cannot extend other annotation types or interfaces; (3) Methods cannot have any parameters; (4) Methods cannot have type parameters; (5) Methods cannot throw exceptions; and (6) The return type of methods of an annotation type must be a primitive, a String, a Class, an annotation type, or an array, where the type of the array is restricted to one of the four allowed types. See [2] for additional restrictions and syntax. The methods of an annotation type define the elements that may be used to parameterize the annotation in code. Annotation types may have default values for any of its elements. For example, an annotation that specifies a defect report could initialize an element defining the defect outcome submitted. Annotations may also have zero elements. This could be used to indicate serializability for a class (as opposed to the current Serializability interface).« less

Compiler writing system detail design specification. Volume 1: Language specification

NASA Technical Reports Server (NTRS)

Arthur, W. J.

1974-01-01

Construction within the Meta language for both language and target machine specification is reported. The elements of the function language as a meaning and syntax are presented, and the structure of the target language is described which represents the target dependent object text representation of applications programs.

Software reliability: Application of a reliability model to requirements error analysis

NASA Technical Reports Server (NTRS)

Logan, J.

1980-01-01

The application of a software reliability model having a well defined correspondence of computer program properties to requirements error analysis is described. Requirements error categories which can be related to program structural elements are identified and their effect on program execution considered. The model is applied to a hypothetical B-5 requirement specification for a program module.

Chronology: MSFC Space Station program, 1982 - present. Major events

NASA Technical Reports Server (NTRS)

Whalen, Jessie E. (Compiler); Mckinley, Sarah L. (Compiler); Gates, Thomas G. (Compiler)

1988-01-01

The Marshall Space Flight Center (MSFC) maintains an active program to capture historical information and documentation on the MSFC's roles regarding Space Shuttle and Space Station. Marshall History Report 12, called Chronology: MSFC Space Station Program, 1982-Present, is presented. It contains synopses of major events listed according to the dates of their occurrence. Indices follow the synopses and provide additional data concerning the events listed. The Event Index provides a brief listing of all the events without synopses. The Element Index lists the specific elements of the Space Station Program under consideration in the events. The Location Index lists the locations where the events took place. The indices and synopses may be cross-referenced by using dates.

GAUSSIAN BEAM LASER RESONATOR PROGRAM

NASA Technical Reports Server (NTRS)

Cross, P. L.

1994-01-01

In designing a laser cavity, the laser engineer is frequently concerned with more than the stability of the resonator. Other considerations include the size of the beam at various optical surfaces within the resonator or the performance of intracavity line-narrowing or other optical elements. Laser resonators obey the laws of Gaussian beam propagation, not geometric optics. The Gaussian Beam Laser Resonator Program models laser resonators using Gaussian ray trace techniques. It can be used to determine the propagation of radiation through laser resonators. The algorithm used in the Gaussian Beam Resonator program has three major components. First, the ray transfer matrix for the laser resonator must be calculated. Next calculations of the initial beam parameters, specifically, the beam stability, the beam waist size and location for the resonator input element, and the wavefront curvature and beam radius at the input surface to the first resonator element are performed. Finally the propagation of the beam through the optical elements is computed. The optical elements can be modeled as parallel plates, lenses, mirrors, dummy surfaces, or Gradient Index (GRIN) lenses. A Gradient Index lens is a good approximation of a laser rod operating under a thermal load. The optical system may contain up to 50 elements. In addition to the internal beam elements the optical system may contain elements external to the resonator. The Gaussian Beam Resonator program was written in Microsoft FORTRAN (Version 4.01). It was developed for the IBM PS/2 80-071 microcomputer and has been implemented on an IBM PC compatible under MS DOS 3.21. The program was developed in 1988 and requires approximately 95K bytes to operate.

Genetic and epigenetic variation in the lineage specification of regulatory T cells

PubMed Central

Arvey, Aaron; van der Veeken, Joris; Plitas, George; Rich, Stephen S; Concannon, Patrick; Rudensky, Alexander Y

2015-01-01

Regulatory T (Treg) cells, which suppress autoimmunity and other inflammatory states, are characterized by a distinct set of genetic elements controlling their gene expression. However, the extent of genetic and associated epigenetic variation in the Treg cell lineage and its possible relation to disease states in humans remain unknown. We explored evolutionary conservation of regulatory elements and natural human inter-individual epigenetic variation in Treg cells to identify the core transcriptional control program of lineage specification. Analysis of single nucleotide polymorphisms in core lineage-specific enhancers revealed disease associations, which were further corroborated by high-resolution genotyping to fine map causal polymorphisms in lineage-specific enhancers. Our findings suggest that a small set of regulatory elements specify the Treg lineage and that genetic variation in Treg cell-specific enhancers may alter Treg cell function contributing to polygenic disease. DOI: http://dx.doi.org/10.7554/eLife.07571.001 PMID:26510014

Database & information tools for transportation research management : Connecticut transportation research peer exchange report of a thematic peer exchange.

DOT National Transportation Integrated Search

2006-05-01

Specific objectives of the Peer Exchange were: : Discuss and exchange information about databases and other software : used to support the program-cycles managed by state transportation : research offices. Elements of the program cycle include: :...

The Contributions of Living-Learning Programs on Developing Sense of Civic Engagement in Undergraduate Students

ERIC Educational Resources Information Center

Rowan-Kenyon, Heather; Soldner, Matt E.; Kurotsuchi Inkelas, Karen

2008-01-01

This study examines the influence of elements of the college experience, specifically participation in a living-learning (L/L) program, on students' self-reported sense of civic engagement. The researchers examined a nationally representative sample of students (n = 1,474) including those who participated in civic engagement themed L/L programs,…

Space platform expendables resupply concept definition study. Volume 3: Work breakdown structure and work breakdown structure dictionary

NASA Technical Reports Server (NTRS)

1984-01-01

The work breakdown structure (WBS) for the Space Platform Expendables Resupply Concept Definition Study is described. The WBS consists of a list of WBS elements, a dictionary of element definitions, and an element logic diagram. The list and logic diagram identify the interrelationships of the elements. The dictionary defines the types of work that may be represented by or be classified under each specific element. The Space Platform Expendable Resupply WBS was selected mainly to support the program planning, scheduling, and costing performed in the programmatics task (task 3). The WBS is neither a statement-of-work nor a work authorization document. Rather, it is a framework around which to define requirements, plan effort, assign responsibilities, allocate and control resources, and report progress, expenditures, technical performance, and schedule performance. The WBS element definitions are independent of make-or-buy decisions, organizational structure, and activity locations unless exceptions are specifically stated.

Ingredients of a Successful Summer Learning Program: A Case Study of the Building Educated Leaders for Life (BELL) Accelerated Learning Summer Program

ERIC Educational Resources Information Center

Capizzano, Jeffrey; Bischoff, Kendra; Woodroffe, Nicola; Chaplin, Duncan

2007-01-01

Based on positive results from a previous evaluation of a summer learning intervention, the current report describes the specific elements of the successful program so it can be replicated, and investigates potential barriers to implementation and replication. The study estimated impacts of the program overall; the authors could not identify which…

Automating FEA programming

NASA Technical Reports Server (NTRS)

Sharma, Naveen

1992-01-01

In this paper we briefly describe a combined symbolic and numeric approach for solving mathematical models on parallel computers. An experimental software system, PIER, is being developed in Common Lisp to synthesize computationally intensive and domain formulation dependent phases of finite element analysis (FEA) solution methods. Quantities for domain formulation like shape functions, element stiffness matrices, etc., are automatically derived using symbolic mathematical computations. The problem specific information and derived formulae are then used to generate (parallel) numerical code for FEA solution steps. A constructive approach to specify a numerical program design is taken. The code generator compiles application oriented input specifications into (parallel) FORTRAN77 routines with the help of built-in knowledge of the particular problem, numerical solution methods and the target computer.

Utilization of operating experience to prevent piping failures at steam plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, T.S.; Dietrich, E.B.

1999-11-01

The key to preventing flow-accelerated corrosion (FAC) induced piping failures in steam plants is the development and implementation of a methodical program for assessing plant susceptibility to FAC and managing the effects of FAC. One of the key elements of an effective FAC program is the accurate and comprehensive utilization of plant-specific and industry-wide operating experience. Operating experience should be used to develop the program to identify specific areas for inspection or replacement, and to maintain an effective program. This paper discusses the utilization of operating experience in FAC programs at nuclear power plants, fossil plants and other steam plants.

Sound Medication Therapy Management Programs, Version 2.0 with validation study.

PubMed

2008-01-01

The Academy of Managed Care Pharmacy (AMCP, the Academy) contracted with the National Committee for Quality Assurance (NCQA) to conduct a field study to validate and assess the 2006 Sound Medication Therapy Management Programs, Version 1.0 document. Version 1.0 posits several principles of sound medication therapy management (MTM) programs: they (1) recruit patients whose data show they may need assistance with managing medications; (2) have health professionals who intervene with patients and their physicians to improve medication regimens; and (3) measure their results. The validation study determined the extent to which the principles identified in version 1.0 are incorporated in MTM programs. The method was designed to determine to what extent the important features and operational elements of sound MTM programs as described in version 1.0 are (1) acceptable and seen as comprehensive to users, (2) incorporated into MTM programs in the field, (3) reflective of the consensus group's intentions, and (4) in need of modification or updating. NCQA first conducted Phase One, in which NCQA gathered perspectives on the principles in the consensus document from a mixed group of stakeholders representing both providers and users of MTM programs. Phase Two involved a deeper analysis of existing programs related to the consensus document, in which NCQA conducted a Web-based survey of 20 varied MTM programs and conducted in-depth site visits with 5 programs. NCQA selected programs offered by a range of MTM-providing organizations -- health plans, pharmacy benefit management companies, disease management organizations, and stand-alone MTM providers. NCQA analyzed the results of both phases. The Phase Two survey asked specific questions of the programs and found that some programs perform beyond the principles listed in version 1.0. NCQA found that none of the elements of the consensus document should be eliminated because programs cannot perform them, although NCQA suggested some areas where the document could be more expansive or more specific, given the state of MTM operations in the field. The important features and operational elements in the document were categorized into the following 3 overall categories, which NCQA used to structure the survey and conduct the site visits in Phase Two: (1) eligibility and enrollment, (2) operations, and (3) quality management. NCQA found that the original consensus document was realistic in identifying the elements of sound MTM. In the current project, NCQA's purpose was not to make judgments about the effectiveness of MTM programs in general or any individual program in particular. NCQA recommended that the consensus document could be made stronger and more specific in 3 areas: (1) specifically state that the Patient Identification and Recruitment section advocates use of various eligibility criteria that may include, but are not limited to, Medicare-defined MTM eligibility criteria; (2) reframe or remove the statement in Appendix A of the consensus document that the preferred modality for MTM is face-to-face interaction between patient and pharmacist, unless there are comparative data to support it as currently written; and (3) specifically recommend that programs measure performance across the entire populations in their plans in addition to measuring results for those patients selected into MTM. This will make benchmarking among programs possible and will lead to substantiated best practices in this growing field.

Health Education for Special Children: Intermediate EMR.

ERIC Educational Resources Information Center

Brodie, Patrick; And Others

Intended for teachers and administrators in special education, the curriculum guide offers information on planning a health education program for educable mentally retarded children in intermediate grades. Sections preceding the actual guide include information on specific goals of and elements necessary for a successful health education program,…

Health Education for Special Children: Primary EMR.

ERIC Educational Resources Information Center

Allen, Linda; And Others

Intended for teachers and administrators in special education, the curriculum guide offers information on planning a health education program for primary level educable mentally retarded students. Sections preceding the actual guide include information on specific goals of and elements necessary for a successful health education program, the…

46 CFR 10.407 - Approval of training programs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... programs designed to substitute for or fulfill any or all of the following: (1) A portion of sea service.... Performance objectives are statements, which identify the specific knowledge, skill, or ability the student... made up of three elements: Expected student performance, condition, and criterion. (4) Assessment...

NASA's 2004 Hall Thruster Program

NASA Technical Reports Server (NTRS)

Jacobson, David T.; Manzella, David H.; Hofer, Richard R.; Peterson, Peter Y.

2004-01-01

An overview of NASA's Hall thruster research and development tasks conducted during fiscal year 2004 is presented. These tasks focus on: raising the technology readiness level of high power Hall thrusters, developing a moderate-power/ moderate specific impulse Hall thruster, demonstrating high-power/high specific impulse Hall thruster operation, and addressing the fundamental technical challenges of emerging Hall thruster concepts. Programmatic background information, technical accomplishments and out year plans for each program element performed under the sponsorship of the In-Space Transportation Program, Project Prometheus, and the Energetics Project are provided.

LCRE and SNAP 50-DR-1 programs. Engineering progress report, October 1, 1962--December 31, 1962

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Declassified 5 Sep 1973. Information is presented concerning LCRE specifications, reactor kinetics, fuel elements, primary coolant circuit, secondary coolant circuit, materials development, and fabrication; and SNAP50-DR- 1 specifications, primary pump, and materials development. (DCC)

Space station integrated propulsion and fluid system study: Fluid systems configuration databook

NASA Technical Reports Server (NTRS)

Rose, L.; Bicknell, B.; Bergman, D.; Wilson, S.

1987-01-01

This databook contains fluid system requirements and system descriptions for Space Station program elements including the United States and International modules, integrated fluid systems, attached payloads, fluid servicers and vehicle accommodation facilities. Separate sections are devoted to each of the program elements and include a discussion of the overall system requirements, specific fluid systems requirements and systems descriptions. The systems descriptions contain configurations, fluid inventory data and component lists. In addition, a list of information sources is referenced at the end of each section.

Program design by a multidisciplinary team. [for structural finite element analysis on STAR-100 computer

NASA Technical Reports Server (NTRS)

Voigt, S.

1975-01-01

The use of software engineering aids in the design of a structural finite-element analysis computer program for the STAR-100 computer is described. Nested functional diagrams to aid in communication among design team members were used, and a standardized specification format to describe modules designed by various members was adopted. This is a report of current work in which use of the functional diagrams provided continuity and helped resolve some of the problems arising in this long-running part-time project.

Rigorous Measures of Implementation: A Methodological Framework for Evaluating Innovative STEM Programs

ERIC Educational Resources Information Center

Cassata-Widera, Amy; Century, Jeanne; Kim, Dae Y.

2011-01-01

The practical need for multidimensional measures of fidelity of implementation (FOI) of reform-based science, technology, engineering, and mathematics (STEM) instructional materials, combined with a theoretical need in the field for a shared conceptual framework that could support accumulating knowledge on specific enacted program elements across…

76 FR 59885 - Special Supplemental Nutrition Program for Women, Infants and Children (WIC): Implementation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

... participating in the WIC Program; increased emphasis on breastfeeding promotion and support; compiling and... the support and promotion of breastfeeding. WIC has historically promoted breastfeeding to all... promotion and support of breastfeeding as an integral element of WIC services and benefits. The specific...

Analyzing the Assumptions of a Policy Program: An Ex-Ante Evaluation of "Educational Governance" in the Netherlands

ERIC Educational Resources Information Center

Janssens, Frans J. G.; de Wolf, Inge F.

2009-01-01

This article demonstrates the value of theoretical ex-ante evaluation of policy programs. We show how a specific policy might not achieve its objectives and illustrate the elements of the policy, which need improvement. These conclusions are based on a reconstruction and evaluation of the theory behind a policy program that aims to increase…

Increasing productivity of the McAuto CAD/CAE system by user-specific applications programming

NASA Technical Reports Server (NTRS)

Plotrowski, S. M.; Vu, T. H.

1985-01-01

Significant improvements in the productivity of the McAuto Computer-Aided Design/Computer-Aided Engineering (CAD/CAE) system were achieved by applications programming using the system's own Graphics Interactive Programming language (GRIP) and the interface capabilities with the main computer on which the system resides. The GRIP programs for creating springs, bar charts, finite element model representations and aiding management planning are presented as examples.

Adaptation of a Control Center Development Environment for Industrial Process Control

NASA Technical Reports Server (NTRS)

Killough, Ronnie L.; Malik, James M.

1994-01-01

In the control center, raw telemetry data is received for storage, display, and analysis. This raw data must be combined and manipulated in various ways by mathematical computations to facilitate analysis, provide diversified fault detection mechanisms, and enhance display readability. A development tool called the Graphical Computation Builder (GCB) has been implemented which provides flight controllers with the capability to implement computations for use in the control center. The GCB provides a language that contains both general programming constructs and language elements specifically tailored for the control center environment. The GCB concept allows staff who are not skilled in computer programming to author and maintain computer programs. The GCB user is isolated from the details of external subsystem interfaces and has access to high-level functions such as matrix operators, trigonometric functions, and unit conversion macros. The GCB provides a high level of feedback during computation development that improves upon the often cryptic errors produced by computer language compilers. An equivalent need can be identified in the industrial data acquisition and process control domain: that of an integrated graphical development tool tailored to the application to hide the operating system, computer language, and data acquisition interface details. The GCB features a modular design which makes it suitable for technology transfer without significant rework. Control center-specific language elements can be replaced by elements specific to industrial process control.

Acquisition Program Transition Workshops: An Element of the DSMC Program Manager Mission Assistance Capability

DTIC Science & Technology

2011-10-01

specific modules as needed. The term “startup” is inclusive of any point in a DoD acquisition program. As noted above, methodology for conducting...Acquisition Sustainment =Decision Point =Milestone Review =Decision Point if PDR is not conducted before Milestone B ProgramA B Initiation) C IOC FOC...start a new program 2.2 Background Conclusions flowing from these observations led the Office of the Secretary of Defense, the De - fense Acquisition

Overview of space power electronic's technology under the CSTI High Capacity Power Program

NASA Technical Reports Server (NTRS)

Schwarze, Gene E.

1994-01-01

The Civilian Space Technology Initiative (CSTI) is a NASA Program targeted at the development of specific technologies in the areas of transportation, operations and science. Each of these three areas consists of major elements and one of the operation's elements is the High Capacity Power element. The goal of this element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA initiatives. The High Capacity Power element is broken down into several subelements that includes energy conversion in the areas of the free piston Stirling power converter and thermoelectrics, thermal management, power management, system diagnostics, and environmental compatibility and system's lifetime. A recent overview of the CSTI High capacity Power element and a description of each of the program's subelements is given by Winter (1989). The goals of the Power Management subelement are twofold. The first is to develop, test, and demonstrate high temperature, radiation-resistant power and control components and circuits that will be needed in the Power Conditioning, Control and Transmission (PCCT) subsystem of a space nuclear power system. The results obtained under this goal will also be applicable to the instrumentation and control subsystem of a space nuclear reactor. These components and circuits must perform reliably for lifetimes of 7-10 years. The second goal is to develop analytical models for use in computer simulations of candidate PCCT subsystems. Circuits which will be required for a specific PCCT subsystem will be designed and built to demonstrate their performance and, also, to validate the analytical models and simulations. The tasks under the Power Management subelement will now be described in terms of objectives, approach and present status of work.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yates, K.R.; Schreiber, A.M.; Rudolph, A.W.

The US Nuclear Regulatory Commission has initiated the Fuel Cycle Risk Assessment Program to provide risk assessment methods for assistance in the regulatory process for nuclear fuel cycle facilities other than reactors. Both the once-through cycle and plutonium recycle are being considered. A previous report generated by this program defines and describes fuel cycle facilities, or elements, considered in the program. This report, the second from the program, describes the survey and computer compilation of fuel cycle risk-related literature. Sources of available information on the design, safety, and risk associated with the defined set of fuel cycle elements were searchedmore » and documents obtained were catalogued and characterized with respect to fuel cycle elements and specific risk/safety information. Both US and foreign surveys were conducted. Battelle's computer-based BASIS information management system was used to facilitate the establishment of the literature compilation. A complete listing of the literature compilation and several useful indexes are included. Future updates of the literature compilation will be published periodically. 760 annotated citations are included.« less

Identification of Prostate Cancer-Specific Circular RNAs

DTIC Science & Technology

2015-10-01

AND SUBTITLE Identification of Prostate Cancer-Specific Circular RNAs ” 5a. CONTRACT NUMBER 5b. GRANT NUMBER W81XWH-14-1-0384 5c. PROGRAM ELEMENT...Distribution Unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT The major goal of this application is to determine whether newly identified circular RNAs can

A General Method for Automatic Computation of Equilibrium Compositions and Theoretical Rocket Performance of Propellants

NASA Technical Reports Server (NTRS)

Gordon, Sanford; Zeleznik, Frank J.; Huff, Vearl N.

1959-01-01

A general computer program for chemical equilibrium and rocket performance calculations was written for the IBM 650 computer with 2000 words of drum storage, 60 words of high-speed core storage, indexing registers, and floating point attachments. The program is capable of carrying out combustion and isentropic expansion calculations on a chemical system that may include as many as 10 different chemical elements, 30 reaction products, and 25 pressure ratios. In addition to the equilibrium composition, temperature, and pressure, the program calculates specific impulse, specific impulse in vacuum, characteristic velocity, thrust coefficient, area ratio, molecular weight, Mach number, specific heat, isentropic exponent, enthalpy, entropy, and several thermodynamic first derivatives.

Information adaptive system of NEEDS. [of NASA End to End Data System

NASA Technical Reports Server (NTRS)

Howle, W. M., Jr.; Kelly, W. L.

1979-01-01

The NASA End-to-End Data System (NEEDS) program was initiated by NASA to improve significantly the state of the art in acquisition, processing, and distribution of space-acquired data for the mid-1980s and beyond. The information adaptive system (IAS) is a program element under NEEDS Phase II which addresses sensor specific processing on board the spacecraft. The IAS program is a logical first step toward smart sensors, and IAS developments - particularly the system components and key technology improvements - are applicable to future smart efforts. The paper describes the design goals and functional elements of the IAS. In addition, the schedule for IAS development and demonstration is discussed.

PLANS: A finite element program for nonlinear analysis of structures. Volume 1: Theoretical manual

NASA Technical Reports Server (NTRS)

Pifko, A.; Levine, H. S.; Armen, H., Jr.

1975-01-01

The PLANS system is described which is a finite element program for nonlinear analysis. The system represents a collection of special purpose computer programs each associated with a distinct physical problem class. Modules of PLANS specifically referenced and described in detail include: (1) REVBY, for the plastic analysis of bodies of revolution; (2) OUT-OF-PLANE, for the plastic analysis of 3-D built-up structures where membrane effects are predominant; (3) BEND, for the plastic analysis of built-up structures where bending and membrane effects are significant; (4) HEX, for the 3-D elastic-plastic analysis of general solids; and (5) OUT-OF-PLANE-MG, for material and geometrically nonlinear analysis of built-up structures. The SATELLITE program for data debugging and plotting of input geometries is also described. The theoretical foundations upon which the analysis is based are presented. Discussed are the form of the governing equations, the methods of solution, plasticity theories available, a general system description and flow of the programs, and the elements available for use.

Component Analysis of Adherence in a Family Intervention

ERIC Educational Resources Information Center

Hill, Laura G.; Owens, Robert W.

2013-01-01

Purpose: Most studies of adherence use a single global measure to examine the relation of adherence to outcomes. These studies inform us about effects of overall implementation but not about importance of specific program elements. Previous research on the Strengthening Families Program 10-14 has shown that outcomes were unrelated to global…

Space station needs, attributes and architectural options study. Volume 3: Requirements

NASA Technical Reports Server (NTRS)

1983-01-01

A typical system specification format is presented and requirements are compiled. A Program Specification Tree is shown showing a high inclination space station and a low inclination space station with their typical element breakdown, also represented along the top blocks are the interfaces with other systems. The specification format is directed at the Low Inclination space station.

Extraterrestrial processing and manufacturing of large space systems, volume 2, chapters 7-14 and appendices

NASA Technical Reports Server (NTRS)

Miller, R. H.; Smith, D. B. S.

1979-01-01

Production and support equipment specifications are described for the space manufacturing facility (SMF). Defined production equipment includes electromagnetic pumps for liquid metal, metal alloying furnaces, die casters, electron beam welders and cutters, glass forming for structural elements, and rolling. A cost analysis is presented which includes the development, the aquisition of all SMF elements, initial operating cost, maintenance and logistics cost, cost of terrestrial materials, and transportation cost for each major element. Computer program listings and outputs are appended.

Air Land Sea Bulletin, Issue No. 2013-2, Joint Close Air Support

DTIC Science & Technology

2013-05-01

game plan between his aircraft or element and the coor- dinated attack aircraft or element (s) for a specific JTAC/FAC(A) designated target. However...5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME...Service Department of Defense field agency sponsored by the US Army Train - ing and Doctrine Command (TRADOC), Marine Corps Combat Development Command

Automated benchmark generation based upon a specification language

NASA Technical Reports Server (NTRS)

Rajan, N.; Feteih, S. E.; Saito, J.

1984-01-01

The problem of validating and verifying digital flight control system (DFCS) software is addressed in this paper. A new specification language DIVERS is proposed, and is the keystone of the approach. This language consists of keywords where each keyword represents an element in the block diagram of a DFCS. DIVERS has a dictionary which contains all the keywords a DFCS designer might need. Translator programs convert the system specifications into an executable, high-level language program. The features of translators are discussed and are elucidated by examples. This language is used to describe a typical flight software module.

MHOST version 4.2. Volume 1: Users' manual

NASA Technical Reports Server (NTRS)

Nakazawa, Shohei

1989-01-01

This manual describes the user options available for running the MHOST finite element analysis package. MHOST is a solid and structural analysis program based on mixed finite element technology, and is specifically designed for three-dimensional inelastic analysis. A family of two- and three-dimensional continuum elements along with beam and shell structural elements can be utilized. Many options are available in the constitutive equation library, the solution algorithms and the analysis capabilities. An overview of the algorithms, a general description of the input data formats, and a discussion of input data for selecting solution algorithms are given.

Animal Assisted Therapy and the Reading Education Assistance Dogs[RTM] (R.E.A.D.) Program as Perceived by Volunteer R.E.A.D. Facilitators: A National Study

ERIC Educational Resources Information Center

Swift, Catherine Hayes

2009-01-01

This study investigated the demographics and perceptions of participants who utilize animals in academic programs, specifically the volunteers who use dogs to work with at-risk children in reading programs. It presented an argument for incorporating research-supported elements of reading tutor skills into the volunteer tutor training for the…

Academic Fidelity and Integrity as Attributes of University Online Degree Program Offerings

ERIC Educational Resources Information Center

Gambescia, Stephen F.; Paolucci, Rocco

2009-01-01

As stakeholders continue to discuss, debate, and advocate their positions related to the value of online learning at colleges and universities, one element that will continue to be discussed, regardless of the specific issue at hand, is "academic integrity and fidelity". Academic fidelity of online degree program offerings is defined in this study…

Heterobivalent Imaging Agents for Simultaneous Targeting Prostate-Specific Membrane Antigen (PSMA) and Hepsin

DTIC Science & Technology

2014-11-01

Prostate-Specific Membrane Antigen ( PSMA ) and Hepsin PRINCIPAL INVESTIGATOR: Youngjoo Byun, Ph. D. CONTRACTING ORGANIZATION: Korea...Simultaneous Targeting Prostate-Specific Membrane Antigen ( PSMA ) and Hepsin 5b. GRANT NUMBER W81XWH-10-1-0189 5c. PROGRAM ELEMENT NUMBER 6...heterobivalent conjugates of PSMA /hepsin-binding ligands labeled with optical dyes or radionuclides. The sensitivity and accuracy of prostate cancer

Automatic programming of simulation models

NASA Technical Reports Server (NTRS)

Schroer, Bernard J.; Tseng, Fan T.; Zhang, Shou X.; Dwan, Wen S.

1990-01-01

The concepts of software engineering were used to improve the simulation modeling environment. Emphasis was placed on the application of an element of rapid prototyping, or automatic programming, to assist the modeler define the problem specification. Then, once the problem specification has been defined, an automatic code generator is used to write the simulation code. The following two domains were selected for evaluating the concepts of software engineering for discrete event simulation: manufacturing domain and a spacecraft countdown network sequence. The specific tasks were to: (1) define the software requirements for a graphical user interface to the Automatic Manufacturing Programming System (AMPS) system; (2) develop a graphical user interface for AMPS; and (3) compare the AMPS graphical interface with the AMPS interactive user interface.

Selecting, adapting, and sustaining programs in health care systems

PubMed Central

Zullig, Leah L; Bosworth, Hayden B

2015-01-01

Practitioners and researchers often design behavioral programs that are effective for a specific population or problem. Despite their success in a controlled setting, relatively few programs are scaled up and implemented in health care systems. Planning for scale-up is a critical, yet often overlooked, element in the process of program design. Equally as important is understanding how to select a program that has already been developed, and adapt and implement the program to meet specific organizational goals. This adaptation and implementation requires attention to organizational goals, available resources, and program cost. We assert that translational behavioral medicine necessitates expanding successful programs beyond a stand-alone research study. This paper describes key factors to consider when selecting, adapting, and sustaining programs for scale-up in large health care systems and applies the Knowledge to Action (KTA) Framework to a case study, illustrating knowledge creation and an action cycle of implementation and evaluation activities. PMID:25931825

Earth Observatory Satellite system definition study. Report no. 5: System design and specifications. Part 2: Ground system element specifications

NASA Technical Reports Server (NTRS)

1974-01-01

The Ground System requirements for the Land Resources Management (LRM) type-A and type-B missions of the Earth Observatory Satellite (EOS) program are presented. Specifications for the Thematic Mapper data processing are provided (LRM A mission). The specifications also cover the R and D instruments (Thematic Mapper and High Resolution Pointable Imager) data processing for the LRM type-B mission.

LANDSAT-D Mission Operations Review (MOR)

NASA Technical Reports Server (NTRS)

1982-01-01

The integrated LANDSAT-D systems operation plan is presented and discussed with respect to functional elements, personnel, and procedures. Specifically, a review of the LANDSAT-D program, mission requirements and management, and flight operations is given.

Thirteenth NASTRAN (R) Users' Colloquium

NASA Technical Reports Server (NTRS)

1985-01-01

The application of finite element methods in engineering is discussed and the use of NASTRAN is compared with other approaches. Specific applications, pre- and post-processing or auxiliary programs, and additional methods of analysis with NASTRAN are covered.

A program for advancing the technology of space concentrators

NASA Technical Reports Server (NTRS)

Naujokas, Gerald J.; Savino, Joseph M.

1989-01-01

In 1985, the NASA Lewis Research Center formed a project, the Advanced Solar Dynamics Power Systems Project, for the purpose of advancing the technology of Solar Dynamic Power Systems for space applications beyond 2000. Since then, technology development activities have been initiated for the major components and subsystems such as the concentrator, heat receiver and engine, and radiator. Described here is a program for developing long lived (10 years or more), lighter weight, and more reflective space solar concentrators than is presently possible. The program is progressing along two parallel paths: one is concentrator concept development and the other is the resolution of those critical technology issues that will lead to durable, highly specular, and lightweight reflector elements. Outlined are the specific objectives, long-term goals, approach, planned accomplishments for the future, and the present status of the various program elements.

A program for advancing the technology of space concentrators

NASA Technical Reports Server (NTRS)

Naujokas, Gerald J.; Savino, Joseph M.

1989-01-01

In 1985, the NASA Lewis Research Center formed a project, the Advanced Solar Dynamics Power Systems Project, for the purpose of advancing the technology of Solar Dynamic Power Systems for space applications beyond 2000. Since then, technology development activities have been initiated for the major components and subsystems such as the concentrator, heat receiver and engine, and radiator. Described here is a program for developing long lived (10 years or more), lighter weight, and more reflective space solar concentrators than is presently possible. The program is progressing along two parallel paths: one is concentrator concept development and the other is the resolution of those critical technology issues that will lead to durable, highly specular, and lightweight reflector elements. Outlined are the specific objectives, long term goals, approach, planned accomplishments for the future, and the present status of the various program elements.

Engine structures analysis software: Component Specific Modeling (COSMO)

NASA Astrophysics Data System (ADS)

McKnight, R. L.; Maffeo, R. J.; Schwartz, S.

1994-08-01

A component specific modeling software program has been developed for propulsion systems. This expert program is capable of formulating the component geometry as finite element meshes for structural analysis which, in the future, can be spun off as NURB geometry for manufacturing. COSMO currently has geometry recipes for combustors, turbine blades, vanes, and disks. Component geometry recipes for nozzles, inlets, frames, shafts, and ducts are being added. COSMO uses component recipes that work through neutral files with the Technology Benefit Estimator (T/BEST) program which provides the necessary base parameters and loadings. This report contains the users manual for combustors, turbine blades, vanes, and disks.

Engine Structures Analysis Software: Component Specific Modeling (COSMO)

NASA Technical Reports Server (NTRS)

Mcknight, R. L.; Maffeo, R. J.; Schwartz, S.

1994-01-01

A component specific modeling software program has been developed for propulsion systems. This expert program is capable of formulating the component geometry as finite element meshes for structural analysis which, in the future, can be spun off as NURB geometry for manufacturing. COSMO currently has geometry recipes for combustors, turbine blades, vanes, and disks. Component geometry recipes for nozzles, inlets, frames, shafts, and ducts are being added. COSMO uses component recipes that work through neutral files with the Technology Benefit Estimator (T/BEST) program which provides the necessary base parameters and loadings. This report contains the users manual for combustors, turbine blades, vanes, and disks.

The Cybernetics of Cognition.

DTIC Science & Technology

1986-07-30

0075 8c. ADUXESS (City, St ate, and ZIP Code) 10. SOURCE OF FUNDING NUMBERS PROGRAM PROJECT TASK WORK UNIT San Diego, CA 92 152-6800 ELEMENT NO NO. NO...of orientation, preceding reports on the detais of the conference. This is followed by the Conference Program , whose specific aims are explained in a...and with one another through dialogue, discourse, and personal acquaintance, the Program proper lists not only the topics of the 9 sessions together

The 25 kW power module evolution study. Part 3: Conceptual designs for power module evolution. Volume 2: Program plans

NASA Technical Reports Server (NTRS)

1979-01-01

A plan is presented for the evolutionary development and deployment of the power module system with performance capabilities required to support the 1983 to 1990 user requirements. Aspects summarized include program functional, operational, and hardware elements; program work breakdown and specification items; development plans and schedules for developmental and technology milestones; test concepts and timeliness; and ground and orbit operations concepts.

Workplace Violence Training Programs for Health Care Workers: An Analysis of Program Elements.

PubMed

Arbury, Sheila; Hodgson, Michael; Zankowski, Donna; Lipscomb, Jane

2017-06-01

Commercial workplace violence (WPV) prevention training programs differ in their approach to violence prevention and the content they present. This study reviews 12 such programs using criteria developed from training topics in the Occupational Safety and Health Administration's (OSHA) Guidelines for Preventing Workplace Violence for Healthcare and Social Service Workers and a review of the WPV literature. None of the training programs addressed all the review criteria. The most significant gap in content was the lack of attention to facility-specific risk assessment and policies. To fill this gap, health care facilities should supplement purchased training programs with specific training in organizational policies and procedures, emergency action plans, communication, facility risk assessment, and employee post-incident debriefing and monitoring. Critical to success is a dedicated program manager who understands risk assessment, facility clinical operations, and program management and evaluation.

Data systems elements technology assessment and system specifications, issue no. 1

NASA Technical Reports Server (NTRS)

1977-01-01

The ability to satisfy the objectives of future NASA Office of Applications Programs is dependent on technology advances in a number of areas of data systems. The technology of end-to-end data systems (space generator elements through ground processing, dissemination, and presentation, is examined in terms of state of the art, trends, and projected developments in the 1980 to 1985 timeframe. Capability is considered in terms of elements that are either commercially available or that can be implemented from commercially available components with minimal development.

Space shuttle configuration accounting functional design specification

NASA Technical Reports Server (NTRS)

1974-01-01

An analysis is presented of the requirements for an on-line automated system which must be capable of tracking the status of requirements and engineering changes and of providing accurate and timely records. The functional design specification provides the definition, description, and character length of the required data elements and the interrelationship of data elements to adequately track, display, and report the status of active configuration changes. As changes to the space shuttle program levels II and III configuration are proposed, evaluated, and dispositioned, it is the function of the configuration management office to maintain records regarding changes to the baseline and to track and report the status of those changes. The configuration accounting system will consist of a combination of computers, computer terminals, software, and procedures, all of which are designed to store, retrieve, display, and process information required to track proposed and proved engineering changes to maintain baseline documentation of the space shuttle program levels II and III.

Drug Research

NASA Technical Reports Server (NTRS)

1989-01-01

NBOD2, a program developed at Goddard Space Flight Center to solve equations of motion coupled N-body systems is used by E.I. DuPont de Nemours & Co. to model potential drugs as a series of elements. The program analyses the vibrational and static motions of independent components in drugs. Information generated from this process is used to design specific drugs to interact with enzymes in designated ways.

Design and Impacts of a Youth-Directed Café Scientifique Program

ERIC Educational Resources Information Center

Hall, Michelle K.; Foutz, Susan; Mayhew, Michael A.

2013-01-01

We have modified the popular Cafe Scientifique model for engaging adults in dialog on issues at the nexus of science and society to address the specific needs and interests of high-school age youth. Key elements of the model are Youth Leadership Teams that guide the program design and assist with implementation; a speaker preparation process to…

Designing an Effective Environmental Education Program that Meets the Needs of Stakeholders: A Case Study of the High Lonesome Ranch in DeBeque, Colorado

NASA Astrophysics Data System (ADS)

Haley, Bethany M.

A successful environmental education (EE) program is one that supports the mission of the parent organization, meets the needs of its audiences, and is effective at increasing environmental literacy. The High Lonesome Ranch (HLR), a private corporation that operates according to a mixed-use landscape model inspired by Aldo Leopold's land ethic, intends to develop an EE program that will operate within an associated nonprofit organization, the High Lonesome Institute (HLI), to further the mission of promoting a contemporary land ethic. Although HLR owners and staff are motivated to develop an EE program, there is currently no clear consensus regarding an overall vision for the program. The purpose of my thesis is to provide HLR owners and their advisors with a recommended design for the education program based on the missions of the HLR and HLI, sound EE theory, stakeholder feedback, and feasibility within the environment of the HLR. To accomplish this, I reviewed pertinent EE literature, reviewed the models used by existing EE programs, and undertook a two-pronged qualitative case study that gathered feedback from the major stakeholders in the HLR/HLI program. The case study included stakeholder interviews and a one-day facilitated charrette. Although feedback from stakeholders on specific program elements ranged widely, there was widespread support for an EE program at the HLR. From this research, I made a series of recommendations regarding how the HLR/HLI should proceed in development, specific program elements, and next steps in the process.

Three-Dimensional Finite Element Ablative Thermal Response and Thermostructural Design of Thermal Protection Systems

NASA Technical Reports Server (NTRS)

Dec, John A.; Braun, Robert D.

2011-01-01

A finite element ablation and thermal response program is presented for simulation of three-dimensional transient thermostructural analysis. The three-dimensional governing differential equations and finite element formulation are summarized. A novel probabilistic design methodology for thermal protection systems is presented. The design methodology is an eight step process beginning with a parameter sensitivity study and is followed by a deterministic analysis whereby an optimum design can determined. The design process concludes with a Monte Carlo simulation where the probabilities of exceeding design specifications are estimated. The design methodology is demonstrated by applying the methodology to the carbon phenolic compression pads of the Crew Exploration Vehicle. The maximum allowed values of bondline temperature and tensile stress are used as the design specifications in this study.

Transcription factor trapping by RNA in gene regulatory elements.

PubMed

Sigova, Alla A; Abraham, Brian J; Ji, Xiong; Molinie, Benoit; Hannett, Nancy M; Guo, Yang Eric; Jangi, Mohini; Giallourakis, Cosmas C; Sharp, Phillip A; Young, Richard A

2015-11-20

Transcription factors (TFs) bind specific sequences in promoter-proximal and -distal DNA elements to regulate gene transcription. RNA is transcribed from both of these DNA elements, and some DNA binding TFs bind RNA. Hence, RNA transcribed from regulatory elements may contribute to stable TF occupancy at these sites. We show that the ubiquitously expressed TF Yin-Yang 1 (YY1) binds to both gene regulatory elements and their associated RNA species across the entire genome. Reduced transcription of regulatory elements diminishes YY1 occupancy, whereas artificial tethering of RNA enhances YY1 occupancy at these elements. We propose that RNA makes a modest but important contribution to the maintenance of certain TFs at gene regulatory elements and suggest that transcription of regulatory elements produces a positive-feedback loop that contributes to the stability of gene expression programs. Copyright © 2015, American Association for the Advancement of Science.

78 FR 14517 - Agency Information Collection Activities; Submission to the Office of Management and Budget for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

... reporting of specific data elements by state vocational rehabilitation (VR) agencies to the Rehabilitation... of the Act requires the Commissioner to conduct evaluations of the VR program. The information from...

Space station systems analysis study. Part 2, Volume 3: Appendixes, Book 1. Program requirements documentation

NASA Technical Reports Server (NTRS)

1977-01-01

The objective elements representative of the kinds of space activities that will be supported by the space construction base (SCB) are discussed in (1) a brief mission overview including the primary purpose and general objectives; (2) descriptions of the processes involved (where applicable), the mission hardware, the principal activities to be undertaken, the test requirements, and the principal tests; and (3) the SCB requirements including such items as special devices (e.g., fabrication modules, assembly or construction fixtures, cranes, and airlocks), power, data management and communications, waste management, environmental control, safety, and logistics. Each program option is then described in terms of the objective elements it supports, its orbit, the general makeup of the SCB, the transportation approach, and the program schedule goals. The specific requirements that are imposed on the SCB in order to support program option L are given.

Adoption and Design of Emerging Dietary Policies to Improve Cardiometabolic Health in the US.

PubMed

Huang, Yue; Pomeranz, Jennifer; Wilde, Parke; Capewell, Simon; Gaziano, Tom; O'Flaherty, Martin; Kersh, Rogan; Whitsel, Laurie; Mozaffarian, Dariush; Micha, Renata

2018-04-14

Suboptimal diet is a leading cause of cardiometabolic disease and economic burdens. Evidence-based dietary policies within 5 domains-food prices, reformulation, marketing, labeling, and government food assistance programs-appear promising at improving cardiometabolic health. Yet, the extent of new dietary policy adoption in the US and key elements crucial to define in designing such policies are not well established. We created an inventory of recent US dietary policy cases aiming to improve cardiometabolic health and assessed the extent of their proposal and adoption at federal, state, local, and tribal levels; and categorized and characterized the key elements in their policy design. Recent federal dietary policies adopted to improve cardiometabolic health include reformulation (trans-fat elimination), marketing (mass-media campaigns to increase fruits and vegetables), labeling (Nutrition Facts Panel updates, menu calorie labeling), and food assistance programs (financial incentives for fruits and vegetables in the Supplemental Nutrition Assistance Program (SNAP) and Women, Infant and Children (WIC) program). Federal voluntary guidelines have been proposed for sodium reformulation and food marketing to children. Recent state proposals included sugar-sweetened beverage (SSB) taxes, marketing restrictions, and SNAP restrictions, but few were enacted. Local efforts varied significantly, with certain localities consistently leading in the proposal or adoption of relevant policies. Across all jurisdictions, most commonly selected dietary targets included fruits and vegetables, SSBs, trans-fat, added sugar, sodium, and calories; other healthy (e.g., nuts) or unhealthy (e.g., processed meats) factors were largely not addressed. Key policy elements to define in designing these policies included those common across domains (e.g., level of government, target population, dietary target, dietary definition, implementation mechanism), and domain-specific (e.g., media channels for food marketing domain) or policy-specific (e.g., earmarking for taxes) elements. Characteristics of certain elements were similarly defined (e.g., fruit and vegetable definition, warning language used in SSB warning labels), while others varied across cases within a policy (e.g., tax base for SSB taxes). Several key elements were not always sufficiently characterized in government documents, and dietary target selections and definitions did not consistently align with the evidence-base. These findings highlight recent action on dietary policies to improve cardiometabolic health in the US; and key elements necessary to design such policies.

DOE limited standard: Operations assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-05-01

Purpose of this standard is to provide DOE Field Element assessors with a guide for conducting operations assessments, and provide DOE Field Element managers with the criteria of the EM Operations Assessment Program. Sections 6.1 to 6.21 provide examples of how to assess specific areas; the general techniques of operations assessments (Section 5) may be applied to other areas of health and safety (e.g. fire protection, criticality safety, quality assurance, occupational safety, etc.).

SINE_scan: an efficient tool to discover short interspersed nuclear elements (SINEs) in large-scale genomic datasets.

PubMed

Mao, Hongliang; Wang, Hao

2017-03-01

Short Interspersed Nuclear Elements (SINEs) are transposable elements (TEs) that amplify through a copy-and-paste mode via RNA intermediates. The computational identification of new SINEs are challenging because of their weak structural signals and rapid diversification in sequences. Here we report SINE_Scan, a highly efficient program to predict SINE elements in genomic DNA sequences. SINE_Scan integrates hallmark of SINE transposition, copy number and structural signals to identify a SINE element. SINE_Scan outperforms the previously published de novo SINE discovery program. It shows high sensitivity and specificity in 19 plant and animal genome assemblies, of which sizes vary from 120 Mb to 3.5 Gb. It identifies numerous new families and substantially increases the estimation of the abundance of SINEs in these genomes. The code of SINE_Scan is freely available at http://github.com/maohlzj/SINE_Scan , implemented in PERL and supported on Linux. wangh8@fudan.edu.cn. Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press.

SINE_scan: an efficient tool to discover short interspersed nuclear elements (SINEs) in large-scale genomic datasets

PubMed Central

Mao, Hongliang

2017-01-01

Abstract Motivation: Short Interspersed Nuclear Elements (SINEs) are transposable elements (TEs) that amplify through a copy-and-paste mode via RNA intermediates. The computational identification of new SINEs are challenging because of their weak structural signals and rapid diversification in sequences. Results: Here we report SINE_Scan, a highly efficient program to predict SINE elements in genomic DNA sequences. SINE_Scan integrates hallmark of SINE transposition, copy number and structural signals to identify a SINE element. SINE_Scan outperforms the previously published de novo SINE discovery program. It shows high sensitivity and specificity in 19 plant and animal genome assemblies, of which sizes vary from 120 Mb to 3.5 Gb. It identifies numerous new families and substantially increases the estimation of the abundance of SINEs in these genomes. Availability and Implementation: The code of SINE_Scan is freely available at http://github.com/maohlzj/SINE_Scan, implemented in PERL and supported on Linux. Contact: wangh8@fudan.edu.cn Supplementary information: Supplementary data are available at Bioinformatics online. PMID:28062442

Lung Cancer-Specific Circular RNAs as Biomarkers

DTIC Science & Technology

2017-08-01

Award Number: W81XWH-16-1-0239 TITLE: Lung Cancer-Specific Circular RNAs as Biomarkers PRINCIPAL INVESTIGATOR: Yin-Yuan Mo CONTRACTING...Specific Circular RNAs as Biomarkers 5a. CONTRACT NUMBER 5b. GRANT NUMBER W81XWH-16-1-0239 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Yin-Yuan Mo Betty...14. ABSTRACT The major goal of this application is to determine whether lung cancer cells differentially express circular RNAs such that these

CFD in the context of IHPTET: The Integrated High Performance Turbine Technology Program

NASA Technical Reports Server (NTRS)

Simoneau, Robert J.; Hudson, Dale A.

1989-01-01

The Integrated High Performance Turbine Engine Technology (IHPTET) Program is an integrated DOD/NASA technology program designed to double the performance capability of today's most advanced military turbine engines as we enter the twenty-first century. Computational Fluid Dynamics (CFD) is expected to play an important role in the design/analysis of specific configurations within this complex machine. In order to do this, a plan is being developed to ensure the timely impact of CFD on IHPTET. The developing philosphy of CFD in the context of IHPTET is discussed. The key elements in the developing plan and specific examples of state-of-the-art CFD efforts which are IHPTET turbine engine relevant are discussed.

OCCUPATIONAL SAFETY AND HEALTH EDUCATION AND TRAINING FOR UNDERSERVED POPULATIONS

PubMed Central

O’CONNOR, TOM; FLYNN, MICHAEL; WEINSTOCK, DEBORAH; ZANONI, JOSEPH

2015-01-01

This article presents an analysis of the essential elements of effective occupational safety and health education and training programs targeting under-served communities. While not an exhaustive review of the literature on occupational safety and health training, the paper provides a guide for practitioners and researchers to the key factors they should consider in the design and implementation of training programs for underserved communities. It also addresses issues of evaluation of such programs, with specific emphasis on considerations for programs involving low-literacy and limited-English-speaking workers. PMID:25053607

Occupational safety and health education and training for underserved populations.

PubMed

O'Connor, Tom; Flynn, Michael; Weinstock, Deborah; Zanoni, Joseph

2014-01-01

This article presents an analysis of the essential elements of effective occupational safety and health education and training programs targeting underserved communities. While not an exhaustive review of the literature on occupational safety and health training, the paper provides a guide for practitioners and researchers to the key factors they should consider in the design and implementation of training programs for underserved communities. It also addresses issues of evaluation of such programs, with specific emphasis on considerations for programs involving low-literacy and limited-English-speaking workers.

Space shuttle orbit maneuvering engine, reusable thrust chamber program. Task 6: Data dump hot fuel element investigation

NASA Technical Reports Server (NTRS)

Nurick, W. H.

1974-01-01

An evaluation of reusable thrust chambers for the space shuttle orbit maneuvering engine was conducted. Tests were conducted using subscale injector hot-fire procedures for the injector configurations designed for a regenerative cooled engine. The effect of operating conditions and fuel temperature on combustion chamber performance was determined. Specific objectives of the evaluation were to examine the optimum like-doublet element geometry for operation at conditions consistent with a fuel regeneratively cooled engine (hot fuel, 200 to 250 F) and the sensitivity of the triplet injector element to hot fuels.

After The Demonstration: What States Sustained After the End of Federal Grants to Improve Children's Health Care Quality.

PubMed

Ireys, Henry T; Brach, Cindy; Anglin, Grace; Devers, Kelly J; Burton, Rachel

2018-02-01

Introduction Under the CHIPRA Quality Demonstration Grant Program, CMS awarded $100 million through 10 grants that 18 state Medicaid agencies implemented between 2010 and 2015. The program's legislatively-mandated purpose was to evaluate promising ideas for improving the quality of children's health care provided through Medicaid and CHIP. As part of the program's multifaceted evaluation, this study examined the extent to which states sustained key program activities after the demonstration ended. Methods We identified 115 potentially sustainable elements within states' CHIPRA demonstrations and analyzed data from grantee reports and key informant interviews to assess sustainment outcomes and key influential factors. We also assessed sustainment of the projects' intellectual capital. Results 56% of potentially sustainable elements were sustained. Sustainment varied by topic area: Elements related to quality measure reporting and practice facilitation were more likely to be sustained than others, such as parent advisors. Broad contextual factors, the state's Medicaid environment, implementation partners' resources, and characteristics of the demonstration itself all shaped sustainment outcomes. Discussion Assessing sustainment of key elements of states' CHIPRA quality demonstration projects provides insight into the fates of the "promising ideas" that the grant program was designed to examine. As a result of the federal government's investment in this grant program, many demonstration states are in a strong position to extend and spread specific strategies for improving the quality of care for children in Medicaid and CHIP. Our findings provide insights for policymakers and providers working to improve the quality of health care for low income children.

Crashworthiness analysis on alternative square honeycomb structure under axial loading

NASA Astrophysics Data System (ADS)

Li, Meng; Deng, Zongquan; Guo, Hongwei; Liu, Rongqiang; Ding, Beichen

2013-07-01

Hexagonal metal honeycomb is widely used in energy absorption field for its special construction. However, many other metal honeycomb structures also show good energy absorption characteristics. Currently, most of the researches focus on hexagonal honeycomb, while few are performed into different honeycomb structures. Therefore, a new alternative square honeycomb is developed to expand the non-hexagonal metal honeycomb applications in the energy absorption fields with the aim of designing low mass and low volume energy absorbers. The finite element model of alternative square honeycomb is built to analyze its specific energy absorption property. As the diversity of honeycomb structure, the parameterized metal honeycomb finite element analysis program is conducted based on PCL language. That program can automatically create finite element model. Numerical results show that with the same foil thickness and cell length of metal honeycomb, the alternative square has better specific energy absorption than hexagonal honeycomb. Using response surface method, the mathematical formulas of honeycomb crashworthiness properties are obtained and optimization is done to get the maximum specific energy absorption property honeycomb. Optimal results demonstrate that to absorb same energy, alternative square honeycomb can save 10% volume of buffer structure than hexagonal honeycomb can do. This research is significant in providing technical support in the extended application of different honeycomb used as crashworthiness structures, and is absolutely essential in low volume and low mass energy absorber design.

El Ro De Gente: U.S. Military Role in Joint, Interagency, Intergovernmental, and Multi-National Operations to Help Manage the River of People from Central America to the U.S.

DTIC Science & Technology

2016-06-10

THE U.S. 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) CDR Brett T. Baker, USN 5d. PROJECT NUMBER 5e. TASK...32 D. Enhance the Foreign Service Officer Program ... programs and grants directing financial resources to target specific problems. While some diplomacy is required to coordinate this, the U.S. military is

El Rio De Gente: U.S. Military Role In Joint, Interagency, Intergovernmental, and Multi-National (JIIM) Operations to Help Manage the River of People from Central America to the U.S.

DTIC Science & Technology

2016-06-10

THE U.S. 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) CDR Brett T. Baker, USN 5d. PROJECT NUMBER 5e. TASK...32 D. Enhance the Foreign Service Officer Program ... programs and grants directing financial resources to target specific problems. While some diplomacy is required to coordinate this, the U.S. military is

Meshing of a Spiral Bevel Gearset with 3D Finite Element Analysis

NASA Technical Reports Server (NTRS)

Bibel, George D.; Handschuh, Robert

1996-01-01

Recent advances in spiral bevel gear geometry and finite element technology make it practical to conduct a structural analysis and analytically roll the gearset through mesh. With the advent of user specific programming linked to 3D solid modelers and mesh generators, model generation has become greatly automated. Contact algorithms available in general purpose finite element codes eliminate the need for the use and alignment of gap elements. Once the gearset is placed in mesh, user subroutines attached to the FE code easily roll the gearset through mesh. The method is described in detail. Preliminary results for a gearset segment showing the progression of the contact lineload is given as the gears roll through mesh.

Guidelines for development of structural integrity programs for DOE high-level waste storage tanks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bandyopadhyay, K.; Bush, S.; Kassir, M.

Guidelines are provided for developing programs to promote the structural integrity of high-level waste storage tanks and transfer lines at the facilities of the Department of Energy. Elements of the program plan include a leak-detection system, definition of appropriate loads, collection of data for possible material and geometric changes, assessment of the tank structure, and non-destructive examination. Possible aging degradation mechanisms are explored for both steel and concrete components of the tanks, and evaluated to screen out nonsignificant aging mechanisms and to indicate methods of controlling the significant aging mechanisms. Specific guidelines for assessing structural adequacy will be provided inmore » companion documents. Site-specific structural integrity programs can be developed drawing on the relevant portions of the material in this document.« less

Modeling damaged wings: Element selection and constraint specification

NASA Technical Reports Server (NTRS)

Stronge, W. J.

1975-01-01

The NASTRAN analytical program was used for structural design, and no problems were anticipated in applying this program to a damaged structure as long as the deformations were small and the strains remained within the elastic range. In this context, NASTRAN was used to test three-dimensional analytical models of a damaged aircraft wing under static loads. A comparison was made of calculated and experimentally measured strains on primary structural components of an RF-84F wing. This comparison brought out two sensitive areas in modeling semimonocoque structures. The calculated strains were strongly affected by the type of elements used adjacent to the damaged region and by the choice of multipoint constraints sets on the damaged boundary.

Idaho's surface-water-quality monitoring program: results from five sites sampled during water years 1990-93

USGS Publications Warehouse

,

1994-01-01

In 1990, the U.S. Geological Survey (USGS), in cooperation with the Idaho Department of Health and Welfare, Division of Environmental Quality, implemented a statewide water-quality monitoring program in response to Idaho's antidegradation policy as required by the Clean Water Act. The program objective is to provide water-quality managers with a coordinated statewide network to detect trends in surface-water quality. The monitoring program includes the collection and analysis of samples from 56 sites on the Bear, Clearwater, Kootenai, Pend Oreille, Salmon, Snake, and Spokane Rivers and their tributaries (fig. 1). Samples are collected every year at 5 sites (annual sites) in drainage basins where long-term water-quality management is practiced, every other year at 19 sites (biennial sites) in basins where land and water uses change slowly, and every third year at 32 sites (triennial sites) where future development may affect water quality. Each year, 25 of the 56 sites are sampled. This report discusses results of sampling at five annual sites. During water years 1990-93 (October 1, 1989, through September 30, 1993), samples were collected six times per year at the five annual sites (fig. 1). Onsite analyses were made for discharge, specific conductance, pH, temperature, dissolved oxygen, bacteria (fecal coliform and fecal streptococci), and alkalinity. Laboratory analyses were made for major ions, nutrients, trace elements, and suspended sediment. Suspended sediment, nitrate, fecal coliform, trace elements, and specific conductance were used to characterize surface-water quality. Because concentrations of all trace elements except zinc were near detection limits, only zinc is discussed.

Deletion endpoint allele-specificity in the developmentally regulated elimination of an internal sequence (IES) in Paramecium.

PubMed Central

Dubrana, K; Le Mouël, A; Amar, L

1997-01-01

Ciliated protozoa undergo thousands of site-specific DNA deletion events during the programmed development of micronuclear genomes to macronuclear genomes. Two deletion elements, W1 and W2, were identified in the Paramecium primaurelia wild-type 156 strain. Here, we report the characterization of both elements in wild-type strain 168 and show that they display variant deletion patterns when compared with those of strain 156. The W1 ( 168 ) element is defective for deletion. The W2 ( 168 ) element is excised utilizing two alternative boundaries on one side, both are different from the boundary utilized to excise the W2156 element. By crossing the 156 and 168 strains, we demonstrate that the definition of all deletion endpoints are each controlled by cis -acting determinant(s) rather than by strain-specific trans-acting factor(s). Sequence comparison of all deleted DNA segments indicates that the 5'-TA-3'terminal sequence is strictly required at their ends. Furthermore the identity of the first eight base pairs of these ends to a previously established consensus sequence correlates with the frequency of the corresponding deletion events. Our data implies the existence of an adaptive convergent evolution of these Paramecium deleted DNA segment end sequences. PMID:9171098

Development of an object-oriented finite element program: application to metal-forming and impact simulations

NASA Astrophysics Data System (ADS)

Pantale, O.; Caperaa, S.; Rakotomalala, R.

2004-07-01

During the last 50 years, the development of better numerical methods and more powerful computers has been a major enterprise for the scientific community. In the same time, the finite element method has become a widely used tool for researchers and engineers. Recent advances in computational software have made possible to solve more physical and complex problems such as coupled problems, nonlinearities, high strain and high-strain rate problems. In this field, an accurate analysis of large deformation inelastic problems occurring in metal-forming or impact simulations is extremely important as a consequence of high amount of plastic flow. In this presentation, the object-oriented implementation, using the C++ language, of an explicit finite element code called DynELA is presented. The object-oriented programming (OOP) leads to better-structured codes for the finite element method and facilitates the development, the maintainability and the expandability of such codes. The most significant advantage of OOP is in the modeling of complex physical systems such as deformation processing where the overall complex problem is partitioned in individual sub-problems based on physical, mathematical or geometric reasoning. We first focus on the advantages of OOP for the development of scientific programs. Specific aspects of OOP, such as the inheritance mechanism, the operators overload procedure or the use of template classes are detailed. Then we present the approach used for the development of our finite element code through the presentation of the kinematics, conservative and constitutive laws and their respective implementation in C++. Finally, the efficiency and accuracy of our finite element program are investigated using a number of benchmark tests relative to metal forming and impact simulations.

Repetitive elements dynamics in cell identity programming, maintenance and disease.

PubMed

Bodega, Beatrice; Orlando, Valerio

2014-12-01

The days of 'junk DNA' seem to be over. The rapid progress of genomics technologies has been unveiling unexpected mechanisms by which repetitive DNA and in particular transposable elements (TEs) have evolved, becoming key issues in understanding genome structure and function. Indeed, rather than 'parasites', recent findings strongly suggest that TEs may have a positive function by contributing to tissue specific transcriptional programs, in particular as enhancer-like elements and/or modules for regulation of higher order chromatin structure. Further, it appears that during development and aging genomes experience several waves of TEs activation, and this contributes to individual genome shaping during lifetime. Interestingly, TEs activity is major target of epigenomic regulation. These findings are shedding new light on the genome-phenotype relationship and set the premises to help to explain complex disease manifestation, as consequence of TEs activity deregulation. Copyright © 2014. Published by Elsevier Ltd.

Workshop on The Rio Grande Rift: Crustal Modeling and Applications of Remote Sensing

NASA Technical Reports Server (NTRS)

Blanchard, D. P. (Editor)

1980-01-01

The elements of a program that could address significant earth science problems by combining remote sensing and traditional geological, geophysical, and geochemical approaches were addressed. Specific areas and tasks related to the Rio Grande Rift are discussed.

Rule-based programming paradigm: a formal basis for biological, chemical and physical computation.

PubMed

Krishnamurthy, V; Krishnamurthy, E V

1999-03-01

A rule-based programming paradigm is described as a formal basis for biological, chemical and physical computations. In this paradigm, the computations are interpreted as the outcome arising out of interaction of elements in an object space. The interactions can create new elements (or same elements with modified attributes) or annihilate old elements according to specific rules. Since the interaction rules are inherently parallel, any number of actions can be performed cooperatively or competitively among the subsets of elements, so that the elements evolve toward an equilibrium or unstable or chaotic state. Such an evolution may retain certain invariant properties of the attributes of the elements. The object space resembles Gibbsian ensemble that corresponds to a distribution of points in the space of positions and momenta (called phase space). It permits the introduction of probabilities in rule applications. As each element of the ensemble changes over time, its phase point is carried into a new phase point. The evolution of this probability cloud in phase space corresponds to a distributed probabilistic computation. Thus, this paradigm can handle tor deterministic exact computation when the initial conditions are exactly specified and the trajectory of evolution is deterministic. Also, it can handle probabilistic mode of computation if we want to derive macroscopic or bulk properties of matter. We also explain how to support this rule-based paradigm using relational-database like query processing and transactions.

Key Design Considerations When Calculating Cost Savings for Population Health Management Programs in an Observational Setting.

PubMed

Murphy, Shannon M E; Hough, Douglas E; Sylvia, Martha L; Dunbar, Linda J; Frick, Kevin D

2018-02-08

To illustrate the impact of key quasi-experimental design elements on cost savings measurement for population health management (PHM) programs. Population health management program records and Medicaid claims and enrollment data from December 2011 through March 2016. The study uses a difference-in-difference design to compare changes in cost and utilization outcomes between program participants and propensity score-matched nonparticipants. Comparisons of measured savings are made based on (1) stable versus dynamic population enrollment and (2) all eligible versus enrolled-only participant definitions. Options for the operationalization of time are also discussed. Individual-level Medicaid administrative and claims data and PHM program records are used to match study groups on baseline risk factors and assess changes in costs and utilization. Savings estimates are statistically similar but smaller in magnitude when eliminating variability based on duration of population enrollment and when evaluating program impact on the entire target population. Measurement in calendar time, when possible, simplifies interpretability. Program evaluation design elements, including population stability and participant definitions, can influence the estimated magnitude of program savings for the payer and should be considered carefully. Time specifications can also affect interpretability and usefulness. © Health Research and Educational Trust.

IMPLEMENTING NONPROFESSIONAL PROGRAMS IN HUMAN SERVICES. MANPOWER TRAINING SERIES.

ERIC Educational Resources Information Center

SCHMAIS, AARON

SPECIFIC PROCESSES FOR UTILIZING NONPROFESSIONAL EMPLOYEES IN HUMAN SERVICES ARE PRESENTED. THE BACKGROUND, CURRENT STATUS, AND PROBLEMS ARE DISCUSSED. THE ELEMENTS CONSIDERED ARE RECRUITMENT, SCREENING AND SELECTION, TRAINING, PLACEMENT, SUPERVISION, UPGRADING, AND EVALUATION. EXAMPLES OF NONPROFESSIONAL POSITIONS INCLUDE THE CASE AIDE IN SOCIAL…

The DACUM Job Analysis Process.

ERIC Educational Resources Information Center

Dofasco, Inc., Hamilton (Ontario).

This document explains the DACUM (Developing A Curriculum) process for analyzing task-based jobs to: identify where standard operating procedures are required; identify duplicated low value added tasks; develop performance standards; create job descriptions; and identify the elements that must be included in job-specific training programs. The…

Descriptions of Selected Career-Related College Language Courses

ERIC Educational Resources Information Center

Knodel, Arthur J.; And Others

1977-01-01

Seven courses or programs at different colleges emphasizing specific career applications of languages are described. They include: Technical French; Spanish for Law Enforcement and Correctional Personnel; Executive German; Proyecto Desarrollo Economico; Spanish for Medical Professions; Elements of Foreign Language, and Business French and Business…

AHRQ series paper 1: comparing medical interventions: AHRQ and the effective health-care program.

PubMed

Slutsky, Jean; Atkins, David; Chang, Stephanie; Sharp, Beth A Collins

2010-05-01

In 2005, the Agency for Healthcare Research and Quality established the Effective Health Care (EHC) Program. The EHC Program aims to provide understandable and actionable information for patients, clinicians, and policy makers. The Evidence-based Practice Centers are one of the cornerstones of the EHC Program. Three key elements guide the EHC Program and thus, the conduct of Comparative Effectiveness Reviews by the EPC Program. Comparative Effectiveness Reviews introduce several specific challenges in addition to the familiar issues raised in a systematic review or meta-analysis of a single intervention. The articles in this series together form the current Methods Guide for Comparative Effectiveness Reviews of the EHC Program.

CFD in the context of IHPTET - The Integrated High Performance Turbine Engine Technology Program

NASA Technical Reports Server (NTRS)

Simoneau, Robert J.; Hudson, Dale A.

1989-01-01

The Integrated High Performance Turbine Engine Technology (IHPTET) Program is an integrated DOD/NASA technology program designed to double the performance capability of today's most advanced military turbine engines as we enter the twenty-first century. Computational Fluid Dynamics (CFD) is expected to play an important role in the design/analysis of specific configurations within this complex machine. In order to do this, a plan is being developed to ensure the timely impact of CFD on IHPTET. The developing philosophy of CFD in the context of IHPTET is discussed. The key elements in the developing plan and specific examples of state-of-the-art CFD efforts which are IHPTET turbine engine relevant are discussed.

Evaluation of a primary prevention program for anxiety disorders using story books with children aged 9-12 years.

PubMed

Bouchard, Stéphane; Gervais, Jean; Gagnier, Nadia; Loranger, Claudie

2013-10-01

This article reports the results of a study evaluating a book-supported primary prevention program "Dominique's Handy Tricks" for anxiety disorders in children aged 9-12 years. This cognitive-behavioural program is delivered using a combination of storybooks and workshop sessions. The originality of the program comes from the use of storybooks that were not developed specifically for anxiety management. Every session is based on a story describing characters facing common stressors and how they manage to cope with their daily problems. In our randomized control trial with 46 children, participation in the program led to a significant improvement in coping skills, perceived self-efficacy, anxiety sensitivity, as well as in symptoms of anxiety and fear. The theoretical and practical elements underlying the delivery of this primary prevention program are described. It is suggested that such an approach, without any labelling specific to anxiety disorders, can be useful in primary prevention programs.

GEODYN system description, volume 1. [computer program for estimation of orbit and geodetic parameters

NASA Technical Reports Server (NTRS)

Chin, M. M.; Goad, C. C.; Martin, T. V.

1972-01-01

A computer program for the estimation of orbit and geodetic parameters is presented. The areas in which the program is operational are defined. The specific uses of the program are given as: (1) determination of definitive orbits, (2) tracking instrument calibration, (3) satellite operational predictions, and (4) geodetic parameter estimation. The relationship between the various elements in the solution of the orbit and geodetic parameter estimation problem is analyzed. The solution of the problems corresponds to the orbit generation mode in the first case and to the data reduction mode in the second case.

Cultural Competency Training Requirements in Graduate Medical Education

PubMed Central

Ambrose, Adrian Jacques H.; Lin, Susan Y.; Chun, Maria B. J.

2013-01-01

Background Cultural competency is an important skill that prepares physicians to care for patients from diverse backgrounds. Objective We reviewed Accreditation Council for Graduate Medical Education (ACGME) program requirements and relevant documents from the ACGME website to evaluate competency requirements across specialties. Methods The program requirements for each specialty and its subspecialties were reviewed from December 2011 through February 2012. The review focused on the 3 competency domains relevant to culturally competent care: professionalism, interpersonal and communication skills, and patient care. Specialty and subspecialty requirements were assigned a score between 0 and 3 (from least specific to most specific). Given the lack of a standardized cultural competence rating system, the scoring was based on explicit mention of specific keywords. Results A majority of program requirements fell into the low- or no-specificity score (1 or 0). This included 21 core specialties (leading to primary board certification) program requirements (78%) and 101 subspecialty program requirements (79%). For all specialties, cultural competency elements did not gravitate toward any particular competency domain. Four of 5 primary care program requirements (pediatrics, obstetrics-gynecology, family medicine, and psychiatry) acquired the high-specificity score of 3, in comparison to only 1 of 22 specialty care program requirements (physical medicine and rehabilitation). Conclusions The degree of specificity, as judged by use of keywords in 3 competency domains, in ACGME requirements regarding cultural competency is highly variable across specialties and subspecialties. Greater specificity in requirements is expected to benefit the acquisition of cultural competency in residents, but this has not been empirically tested. PMID:24404264

Framework for a ground-water quality monitoring and assessment program for California

USGS Publications Warehouse

Belitz, Kenneth; Dubrovsky, Neil M.; Burow, Karen; Jurgens, Bryant C.; John, Tyler

2003-01-01

The State of California uses more ground water than any other State in the Nation. With a population of over 30 million people, an agricultural economy based on intensive irrigation, large urban industrial areas, and naturally elevated concentrations of some trace elements, there is a wide range of contaminant sources that have the potential to contaminate ground water and limit its beneficial uses. In response to the many-and different-potential sources of ground-water contamination, the State of California has evolved an extensive set of rules and programs to protect ground-water quality, and agencies to implement the rules and programs. These programs have in common a focus on compliance with regulations governing chemical use and (or) ground-water quality. Although appropriate for, and successful at, their specific missions, these programs do not at present provide a comprehensive view of ground-water quality in the State of California. In October 2001, The California Assembly passed a bill, AB 599, establishing the Ground-Water- Quality Monitoring Act of 2001.' The goal of AB 599 is to improve Statewide comprehensive ground-water monitoring and increase availability of information about ground-water quality to the public. AB 599 requires the State Water Resources Control Board (SWRCB), in collaboration with an interagency task force (ITF) and a public advisory committee (PAC), to develop a plan for a comprehensive ground-water monitoring program. AB 599 specifies that the comprehensive program should be capable of assessing each ground-water basin in the State through direct and other statistically reliable sampling approaches, and that the program should integrate existing monitoring programs and design new program elements, as necessary. AB 599 also stresses the importance of prioritizing ground-water basins that provide drinking water. The United States Geological Survey (USGS), in cooperation with the SWRCB, and in coordination with the ITF and PAC, has developed a framework for a comprehensive ground-water-quality monitoring and assessment program for California. The proposed framework relies extensively on previous work conducted by the USGS through its National Water-Quality Assessment (NAWQA) program. In particular, the NAWQA program defines three types of ground-water assessment: (1) status, the assessment of the current quality of the ground-water resource; (2) trends, the detection of changes in water quality, and (3) understanding, assessing the human and natural factors that affect ground-water quality. A Statewide, comprehensive ground-water quality-monitoring and assessment program is most efficiently accomplished by applying uniform and consistent study-design and data-collection protocols to the entire State. At the same time, a comprehensive program should be relevant at a variety of scales, and therefore needs to retain flexibility to address regional and local issues. Consequently, many of the program components include a predominant element that will be consistently applied in all basins, and a secondary element that may be applied in specific basins where local conditions warrant attention.

The NASTRAN demonstration program manual (level 16.0)

NASA Technical Reports Server (NTRS)

1976-01-01

The types of problems that can be solved with NASTRAN are presented. The nature of the problem, the underlying theory, the specific geometric and physical input quanties, and the comparison of theoretical and NASTRAN results are discussed. At least one problem for each of the rigid formats and nearly all of the elements or provided. The features of NASTRAN demonstrated by specific problems are described. The results obtained are valid.

English Language as a Requirement Course for Information Students--A Content Analysis of English Syllabus in the Faculty of Arabic and Islamic Studies/Nile Valley University

ERIC Educational Resources Information Center

Ahmed, Mustafa Shazali Mustafa

2009-01-01

The study investigated the importance of two elements in the process of syllabus design (ends / means specifications, program implementation) in the faculty of Islamic and Arabic studies, Nile Valley University, designed in 1995. Results indicate that the ends/means specifications stage is used to present the general aims and the objective of each…

Program Design for Healthy Weight in Lesbian and Bisexual Women: A Ten-City Prevention Initiative.

PubMed

Fogel, Sarah C; McElroy, Jane A; Garbers, Samantha; McDonnell, Cheryl; Brooks, Jacquetta; Eliason, Michele J; Ingraham, Natalie; Osborn, Ann; Rayyes, Nada; Redman, Sarah Davis; Wood, Susan F; Haynes, Suzanne G

2016-07-07

Adult lesbian and bisexual (LB) women are more likely to be obese than adult heterosexual women. To address weight- and fitness-related health disparities among older LB women using culturally appropriate interventions, the Office on Women's Health (OWH) provided funding for the program, Healthy Weight in Lesbian and Bisexual Women (HWLB): Striving for a Healthy Community. This paper provides a description of the interventions that were implemented. Five research organizations partnered with lesbian, gay, bisexual, and transgender community organizations to implement healthy weight interventions addressing the needs of LB women 40 years and older. The interventions incorporated evidence-based recommendations related to physical activity and nutrition. Each group intervention developed site-specific primary objectives related to the overall goal of improving the health of LB women and included weight and waist circumference reduction as secondary objectives. A 57-item core health survey was administered across the five sites. At a minimum, each program obtained pre- and post-program assessments. Each program included the OWH-required common elements of exercise, social support, and education on nutrition and physical activity, but adopted a unique approach to deliver intervention content. This is the first time a multisite intervention has been conducted to promote healthy weight in older LB women. Core measurements across the HWLB programs will allow for pooled analyses, and differences in study design will permit analysis of site-specific elements. The documentation and analysis of the effectiveness of these five projects will provide guidance for model programs and future research on LB populations. Copyright © 2015 Jacobs Institute of Women's Health. All rights reserved.

Enrichment Zoning Options for the Small Nuclear Rocket Engine (SNRE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruce G. Schnitzler; Stanley K. Borowski

2010-07-01

Advancement of U.S. scientific, security, and economic interests through a robust space exploration program requires high performance propulsion systems to support a variety of robotic and crewed missions beyond low Earth orbit. In NASA’s recent Mars Design Reference Architecture (DRA) 5.0 study (NASA-SP-2009-566, July 2009), nuclear thermal propulsion (NTP) was again selected over chemical propulsion as the preferred in-space transportation system option because of its high thrust and high specific impulse (-900 s) capability, increased tolerance to payload mass growth and architecture changes, and lower total initial mass in low Earth orbit. An extensive nuclear thermal rocket technology development effortmore » was conducted from 1955-1973 under the Rover/NERVA Program. The Small Nuclear Rocket Engine (SNRE) was the last engine design studied by the Los Alamos National Laboratory during the program. At the time, this engine was a state-of-the-art design incorporating lessons learned from the very successful technology development program. Past activities at the NASA Glenn Research Center have included development of highly detailed MCNP Monte Carlo transport models of the SNRE and other small engine designs. Preliminary core configurations typically employ fuel elements with fixed fuel composition and fissile material enrichment. Uniform fuel loadings result in undesirable radial power and temperature profiles in the engines. Engine performance can be improved by some combination of propellant flow control at the fuel element level and by varying the fuel composition. Enrichment zoning at the fuel element level with lower enrichments in the higher power elements at the core center and on the core periphery is particularly effective. Power flattening by enrichment zoning typically results in more uniform propellant exit temperatures and improved engine performance. For the SNRE, element enrichment zoning provided very flat radial power profiles with 551 of the 564 fuel elements within 1% of the average element power. Results for this and alternate enrichment zoning options for the SNRE are compared.« less

Space Launch System Base Heating Test: Sub-Scale Rocket Engine/Motor Design, Development and Performance Analysis

NASA Technical Reports Server (NTRS)

Mehta, Manish; Seaford, Mark; Kovarik, Brian; Dufrene, Aaron; Solly, Nathan; Kirchner, Robert; Engel, Carl D.

2014-01-01

The Space Launch System (SLS) base heating test is broken down into two test programs: (1) Pathfinder and (2) Main Test. The Pathfinder Test Program focuses on the design, development, hot-fire test and performance analyses of the 2% sub-scale SLS core-stage and booster element propulsion systems. The core-stage propulsion system is composed of four gaseous oxygen/hydrogen RS-25D model engines and the booster element is composed of two aluminum-based model solid rocket motors (SRMs). The first section of the paper discusses the motivation and test facility specifications for the test program. The second section briefly investigates the internal flow path of the design. The third section briefly shows the performance of the model RS-25D engines and SRMs for the conducted short duration hot-fire tests. Good agreement is observed based on design prediction analysis and test data. This program is a challenging research and development effort that has not been attempted in 40+ years for a NASA vehicle.

Optimum structural design with plate bending elements - A survey

NASA Technical Reports Server (NTRS)

Haftka, R. T.; Prasad, B.

1981-01-01

A survey is presented of recently published papers in the field of optimum structural design of plates, largely with respect to the minimum-weight design of plates subject to such constraints as fundamental frequency maximization. It is shown that, due to the availability of powerful computers, the trend in optimum plate design is away from methods tailored to specific geometry and loads and toward methods that can be easily programmed for any kind of plate, such as finite element methods. A corresponding shift is seen in optimization from variational techniques to numerical optimization algorithms. Among the topics covered are fully stressed design and optimality criteria, mathematical programming, smooth and ribbed designs, design against plastic collapse, buckling constraints, and vibration constraints.

The Brazilian Aerospace Industry: A Cast Study of the Technological Impact of Offset Agreements in a Recipient Industry

DTIC Science & Technology

1989-12-01

Special Export Programs, Comissco de Beneficios Fiscais e Programas Especiais de Exportagdo - BEFIEX. This program allows the rebate of tariff and...development became a specific policy objective. The 1968-69 Development Plan, Programa Estrat6gico de Desenvolvimento (PED), defined an explicit...Comunicagdo de Programa de Aquisigdo - CPA) containing: object, quantity, delivery time, value, nature, and other basic elements of contracting. To comply

Junior High Environmental and Outdoor Education: Teacher

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Branch.

This manual for Junior High Environmental and Outdoor Education courses specifically addresses the special needs of adolescent students. A program development model is organized around six elements: (1) outdoor core; (2) personal and group development; (3) environmental core; (4) outdoor expeditions; (5) environmental investigations; and (6)…

Cost Differential Analysis: Providing Data for Added Cost Funding

ERIC Educational Resources Information Center

Nystrom, Dennis C.; Hennessy, James V.

1975-01-01

A 1972-73 statewide study conducted in Illinois to develop a cost accounting system which facilitates cost differential ratios for secondary vocational education courses indicated that vocational programs are approximately twice as expensive as nonvocational. Specific cost elements identified in the study provided essential information regarding…

Generating Data Flow Programs from Nonprocedural Specifications.

DTIC Science & Technology

1983-03-01

With the I-structures, Gajski points out, it is difficult to know ahead of time the optimal memory allocation scheme to pertition large arrays. amory...contention problems may occur for frequently accessed elements stored in the sam memory module. Gajski observes that these are the same problem which

The Jet Propulsion Laboratory Electric and Hybrid Vehicle System Research and Development Project, 1977-1984: A Review

NASA Technical Reports Server (NTRS)

Kurtz, D.; Roan, V.

1985-01-01

The JPL Electric and Hybrid Vehicle System Research and Development Project was established in the spring of 1977. Originally administered by the Energy Research and Development Administration (ERDA) and later by the Electric and Hybrid Vehicle Division of the U.S. Department of Energy (DOE), the overall Program objective was to decrease this nation's dependence on foreign petroleum sources by developing the technologies and incentives necessary to bring electric and hybrid vehicles successfully into the marketplace. The ERDA/DOE Program structure was divided into two major elements: (1) technology research and system development and (2) field demonstration and market development. The Jet Propulsion Laboratory (JPL) has been one of several field centers supporting the former Program element. In that capacity, the specific historical areas of responsibility have been: (1) Vehicle system developments (2) System integration and test (3) Supporting subsystem development (4) System assessments (5) Simulation tool development.

New method for identifying features of an image on a digital video display

NASA Astrophysics Data System (ADS)

Doyle, Michael D.

1991-04-01

The MetaMap process extends the concept of direct manipulation human-computer interfaces to new limits. Its specific capabilities include the correlation of discrete image elements to relevant text information and the correlation of these image features to other images as well as to program control mechanisms. The correlation is accomplished through reprogramming of both the color map and the image so that discrete image elements comprise unique sets of color indices. This process allows the correlation to be accomplished with very efficient data storage and program execution times. Image databases adapted to this process become object-oriented as a result. Very sophisticated interrelationships can be set up between images text and program control mechanisms using this process. An application of this interfacing process to the design of an interactive atlas of medical histology as well as other possible applications are described. The MetaMap process is protected by U. S. patent #4

Advanced composites structural concepts and materials technologies for primary aircraft structures. Structural response and failure analysis: ISPAN modules users manual

NASA Technical Reports Server (NTRS)

Hairr, John W.; Huang, Jui-Ten; Ingram, J. Edward; Shah, Bharat M.

1992-01-01

The ISPAN Program (Interactive Stiffened Panel Analysis) is an interactive design tool that is intended to provide a means of performing simple and self contained preliminary analysis of aircraft primary structures made of composite materials. The program combines a series of modules with the finite element code DIAL as its backbone. Four ISPAN Modules were developed and are documented. These include: (1) flat stiffened panel; (2) curved stiffened panel; (3) flat tubular panel; and (4) curved geodesic panel. Users are instructed to input geometric and material properties, load information and types of analysis (linear, bifurcation buckling, or post-buckling) interactively. The program utilizing this information will generate finite element mesh and perform analysis. The output in the form of summary tables of stress or margins of safety, contour plots of loads or stress, and deflected shape plots may be generalized and used to evaluate specific design.

Implementation of a DOD ELAP Conforming Quality System at a FUSRAP Site Field Temporary Radiological Screening Laboratory - 13500

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winters, M.S.; McElheny, G.; Houston, L.M.

2013-07-01

A case study is presented on specific program elements that supported the transition of a temporary field radiological screening lab to an accredited operation capable of meeting client quality objectives for definitive results data. The temporary field lab is located at the Formerly Utilized Sites Remedial Action Program Linde Site in Tonawanda, NY. The site is undergoing remediation under the direction of the United States Army Corps of Engineers - Buffalo District, with Cabrera Services Inc. as the remediation contractor and operator of the on-site lab. Analysis methods employed in the on-site lab include gross counting of alpha and betamore » particle activity on swipes and air filters and gamma spectroscopy of soils and other solid samples. A discussion of key program elements and lessons learned may help other organizations considering pursuit of accreditation for on-site screening laboratories. (authors)« less

A large-scale computer facility for computational aerodynamics

NASA Technical Reports Server (NTRS)

Bailey, F. R.; Ballhaus, W. F., Jr.

1985-01-01

As a result of advances related to the combination of computer system technology and numerical modeling, computational aerodynamics has emerged as an essential element in aerospace vehicle design methodology. NASA has, therefore, initiated the Numerical Aerodynamic Simulation (NAS) Program with the objective to provide a basis for further advances in the modeling of aerodynamic flowfields. The Program is concerned with the development of a leading-edge, large-scale computer facility. This facility is to be made available to Government agencies, industry, and universities as a necessary element in ensuring continuing leadership in computational aerodynamics and related disciplines. Attention is given to the requirements for computational aerodynamics, the principal specific goals of the NAS Program, the high-speed processor subsystem, the workstation subsystem, the support processing subsystem, the graphics subsystem, the mass storage subsystem, the long-haul communication subsystem, the high-speed data-network subsystem, and software.

Finite element solution for energy conservation using a highly stable explicit integration algorithm

NASA Technical Reports Server (NTRS)

Baker, A. J.; Manhardt, P. D.

1972-01-01

Theoretical derivation of a finite element solution algorithm for the transient energy conservation equation in multidimensional, stationary multi-media continua with irregular solution domain closure is considered. The complete finite element matrix forms for arbitrarily irregular discretizations are established, using natural coordinate function representations. The algorithm is embodied into a user-oriented computer program (COMOC) which obtains transient temperature distributions at the node points of the finite element discretization using a highly stable explicit integration procedure with automatic error control features. The finite element algorithm is shown to posses convergence with discretization for a transient sample problem. The condensed form for the specific heat element matrix is shown to be preferable to the consistent form. Computed results for diverse problems illustrate the versatility of COMOC, and easily prepared output subroutines are shown to allow quick engineering assessment of solution behavior.

NESSUS/NASTRAN Interface

NASA Technical Reports Server (NTRS)

Millwater, Harry; Riha, David

1996-01-01

The NESSUS probabilistic analysis computer program has been developed with a built-in finite element analysis program NESSUS/FEM. However, the NESSUS/FEM program is specialized for engine structures and may not contain sufficient features for other applications. In addition, users often become well acquainted with a particular finite element code and want to use that code for probabilistic structural analysis. For these reasons, this work was undertaken to develop an interface between NESSUS and NASTRAN such that NASTRAN can be used for the finite element analysis and NESSUS can be used for the probabilistic analysis. In addition, NESSUS was restructured such that other finite element codes could be more easily coupled with NESSUS. NESSUS has been enhanced such that NESSUS will modify the NASTRAN input deck for a given set of random variables, run NASTRAN and read the NASTRAN result. The coordination between the two codes is handled automatically. The work described here was implemented within NESSUS 6.2 which was delivered to NASA in September 1995. The code runs on Unix machines: Cray, HP, Sun, SGI and IBM. The new capabilities have been implemented such that a user familiar with NESSUS using NESSUS/FEM and NASTRAN can immediately use NESSUS with NASTRAN. In other words, the interface with NASTRAN has been implemented in an analogous manner to the interface with NESSUS/FEM. Only finite element specific input has been changed. This manual is written as an addendum to the existing NESSUS 6.2 manuals. We assume users have access to NESSUS manuals and are familiar with the operation of NESSUS including probabilistic finite element analysis. Update pages to the NESSUS PFEM manual are contained in Appendix E. The finite element features of the code and the probalistic analysis capabilities are summarized.

System configuration management plan for 101-SY Hydrogen Mitigation Test Project Mini-Data Acquisition and Control System of Tank Waste Remediation System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vargo, G.F. Jr.

1994-10-11

The DOE Standard defines the configuration management program by the five basic program elements of ``program management,`` ``design requirements,`` ``document control,`` ``change control,`` and ``assessments,`` and the two adjunct recovery programs of ``design reconstitution,`` and ``material condition and aging management. The C-M model of five elements and two adjunct programs strengthen the necessary technical and administrative control to establish and maintain a consistent technical relationship among the requirements, physical configuration, and documentation. Although the DOE Standard was originally developed for the operational phase of nuclear facilities, this plan has the flexibility to be adapted and applied to all life-cycle phasesmore » of both nuclear and non-nuclear facilities. The configuration management criteria presented in this plan endorses the DOE Standard and has been tailored specifically to address the technical relationship of requirements, physical configuration, and documentation during the full life-cycle of the 101-SY Hydrogen Mitigation Test Project Mini-Data Acquisition and Control System of Tank Waste Remediation System.« less

2011 Annual Criticality Safety Program Performance Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrea Hoffman

The 2011 review of the INL Criticality Safety Program has determined that the program is robust and effective. The review was prepared for, and fulfills Contract Data Requirements List (CDRL) item H.20, 'Annual Criticality Safety Program performance summary that includes the status of assessments, issues, corrective actions, infractions, requirements management, training, and programmatic support.' This performance summary addresses the status of these important elements of the INL Criticality Safety Program. Assessments - Assessments in 2011 were planned and scheduled. The scheduled assessments included a Criticality Safety Program Effectiveness Review, Criticality Control Area Inspections, a Protection of Controlled Unclassified Information Inspection,more » an Assessment of Criticality Safety SQA, and this management assessment of the Criticality Safety Program. All of the assessments were completed with the exception of the 'Effectiveness Review' for SSPSF, which was delayed due to emerging work. Although minor issues were identified in the assessments, no issues or combination of issues indicated that the INL Criticality Safety Program was ineffective. The identification of issues demonstrates the importance of an assessment program to the overall health and effectiveness of the INL Criticality Safety Program. Issues and Corrective Actions - There are relatively few criticality safety related issues in the Laboratory ICAMS system. Most were identified by Criticality Safety Program assessments. No issues indicate ineffectiveness in the INL Criticality Safety Program. All of the issues are being worked and there are no imminent criticality concerns. Infractions - There was one criticality safety related violation in 2011. On January 18, 2011, it was discovered that a fuel plate bundle in the Nuclear Materials Inspection and Storage (NMIS) facility exceeded the fissionable mass limit, resulting in a technical safety requirement (TSR) violation. The TSR limits fuel plate bundles to 1085 grams U-235, which is the maximum loading of an ATR fuel element. The overloaded fuel plate bundle contained 1097 grams U-235 and was assembled under an 1100 gram U-235 limit in 1982. In 2003, the limit was reduced to 1085 grams citing a new criticality safety evaluation for ATR fuel elements. The fuel plate bundle inventories were not checked for compliance prior to implementing the reduced limit. A subsequent review of the NMIS inventory did not identify further violations. Requirements Management - The INL Criticality Safety program is organized and well documented. The source requirements for the INL Criticality Safety Program are from 10 CFR 830.204, DOE Order 420.1B, Chapter III, 'Nuclear Criticality Safety,' ANSI/ANS 8-series Industry Standards, and DOE Standards. These source requirements are documented in LRD-18001, 'INL Criticality Safety Program Requirements Manual.' The majority of the criticality safety source requirements are contained in DOE Order 420.1B because it invokes all of the ANSI/ANS 8-Series Standards. DOE Order 420.1B also invokes several DOE Standards, including DOE-STD-3007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities.' DOE Order 420.1B contains requirements for DOE 'Heads of Field Elements' to approve the criticality safety program and specific elements of the program, namely, the qualification of criticality staff and the method for preparing criticality safety evaluations. This was accomplished by the approval of SAR-400, 'INL Standardized Nuclear Safety Basis Manual,' Chapter 6, 'Prevention of Inadvertent Criticality.' Chapter 6 of SAR-400 contains sufficient detail and/or reference to the specific DOE and contractor documents that adequately describe the INL Criticality Safety Program per the elements specified in DOE Order 420.1B. The Safety Evaluation Report for SAR-400 specifically recognizes that the approval of SAR-400 approves the INL Criticality Safety Program. No new source requirements were released in 2011. A revision to LRD-18001 is planned for 2012 to clarify design requirements for criticality alarms. Training - Criticality Safety Engineering has developed training and provides training for many employee positions, including fissionable material handlers, facility managers, criticality safety officers, firefighters, and criticality safety engineers. Criticality safety training at the INL is a program strength. A revision to the training module developed in 2010 to supplement MFC certified fissionable material handlers (operators) training was prepared and presented in August of 2011. This training, 'Applied Science of Criticality Safety,' builds upon existing training and gives operators a better understanding of how their criticality controls are derived. Improvements to 00INL189, 'INL Criticality Safety Principles' are planned for 2012 to strengthen fissionable material handler training.« less

49 CFR 350.109 - What are the national program elements?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false What are the national program elements? 350.109... COMMERCIAL MOTOR CARRIER SAFETY ASSISTANCE PROGRAM General § 350.109 What are the national program elements? The national program elements include the following five activities: (a) Driver/vehicle inspections...

49 CFR 350.109 - What are the national program elements?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false What are the national program elements? 350.109... COMMERCIAL MOTOR CARRIER SAFETY ASSISTANCE PROGRAM General § 350.109 What are the national program elements? The national program elements include the following five activities: (a) Driver/vehicle inspections...

49 CFR 350.109 - What are the national program elements?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false What are the national program elements? 350.109... COMMERCIAL MOTOR CARRIER SAFETY ASSISTANCE PROGRAM General § 350.109 What are the national program elements? The national program elements include the following five activities: (a) Driver/vehicle inspections...

49 CFR 350.109 - What are the national program elements?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 5 2012-10-01 2012-10-01 false What are the national program elements? 350.109... COMMERCIAL MOTOR CARRIER SAFETY ASSISTANCE PROGRAM General § 350.109 What are the national program elements? The national program elements include the following five activities: (a) Driver/vehicle inspections...

49 CFR 350.109 - What are the national program elements?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false What are the national program elements? 350.109... COMMERCIAL MOTOR CARRIER SAFETY ASSISTANCE PROGRAM General § 350.109 What are the national program elements? The national program elements include the following five activities: (a) Driver/vehicle inspections...

A pedagogical model for integrative training in conservation and sustainability

Treesearch

Meredith Welch-Devine; Dean Hardy; J. Peter Brosius; Nik Heynen

2014-01-01

The benefits and challenges of interdisciplinary training are well documented, and several reviews have discussed the particular importance of interdisciplinary training for conservation scholars and practitioners. We discuss the progress within one university program to implement specific training models, elements, and tools designed to move beyond remaining barriers...

Combat Ready Crew Performance Measurement System. Phase IIID. Specifications and Implementation Plan

DTIC Science & Technology

1974-12-01

CONTRACT OR GRANT NUMSERf»; F41609-7 l-C-0008 10 PROGRAM ELEMENT, PROJECT, TASK AREA a WORK UNIT NUMBERS 11230101 12. REPORT DATE...the alteratives should be reconsidered. Software, like Disneyland shoSd never be complete as long as there is creative imagination. Historically

Development of Intelligent Method for Differential Diagnosis of Specific Language Impairment

DTIC Science & Technology

2001-10-25

Grant Number Program Element Number Author(s) Project Number Task Number Work Unit Number Performing Organization Name(s) and Address(es) Dept...Development in a Grammatical SLI boy: Modularity and Innateness, Journal of Neurolinguistics 10, (1997) 75-107. [8] J.P. Craiger, D.F. Goodman, R.J

13 CFR 125.5 - Certificate of Competency Program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the type of product being procured or the specific contract at issue. (iv) A non-manufacturer making... application. (1) The COC review process is not limited to the areas of nonresponsibility cited by the contracting officer. SBA may, at its discretion, independently evaluate the COC applicant for all elements of...

Psychotherapy training: Suggestions for core ingredients and future research.

PubMed

Boswell, James F; Castonguay, Louis G

2007-12-01

Despite our considerable depth and breadth of empirical knowledge on psychotherapy process and outcome, research on psychotherapy training is somewhat lacking. We would argue, however, that the scientist-practitioner model should not only guide practice, but also the way our field approaches training. In this paper we outline our perspective on the crucial elements of psychotherapy training based on available evidence, theory, and clinical experience, focusing specifically on the structure, key components, and important skills to be learned in a successful training program. In addition, we derive specific research directions based on the crucial elements of our proposed training perspective, and offer general considerations for research on training, including method and measurement issues. (PsycINFO Database Record (c) 2010 APA, all rights reserved).

Using intervention mapping to deconstruct cognitive work hardening: a return-to-work intervention for people with depression.

PubMed

Wisenthal, Adeena; Krupa, Terry

2014-12-12

Mental health related work disability leaves are increasing at alarming rates with depression emerging as the most common mental disorder in the workforce. Treatments are available to alleviate depressive symptoms and associated functional impacts; however, they are not specifically aimed at preparing people to return to work. Cognitive work hardening (CWH) is a novel intervention that addresses this gap in the health care system. This paper presents a theoretical analysis of the components and underlying mechanisms of CWH using Intervention Mapping (IM) as a tool to deconstruct its elements. The cognitive sequelae of depression and their relevance to return-to-work (RTW) are examined together with interpersonal skills and other work-related competencies that affect work ability. IM, a tool typically used to create programs, is used to deconstruct an existing program, namely CWH, into its component parts and link them to theories and models in the literature. CWH has been deconstructed into intervention elements which are linked to program performance objectives through underlying theoretical models. In this way, linkages are made between tools and materials of the intervention and the overall program objective of 'successful RTW for people with depression'. An empirical study of the efficacy of CWH is currently underway which should provide added insight and understanding into this intervention. The application of IM to CWH illustrates the theoretical underpinnings of the treatment intervention and assists with better understanding the linkage between intervention elements and intervention objective. Applying IM to deconstruct an existing program (rather than create a program) presents an alternate application of the IM tool which can have implications for other programs in terms of enhancing understanding, grounding in theoretical foundations, communicating program design, and establishing a basis for program evaluation and improvement.

Early Program Development

NASA Image and Video Library

1971-01-01

Managed by Marshall Space Flight Center, the Space Tug concept was intended to be a reusable multipurpose space vehicle designed to transport payloads to different orbital inclinations. Utilizing mission-specific combinations of its three primary modules (crew, propulsion, and cargo) and a variety of supplementary kits, the Space Tug would have been capable of numerous space applications. This 1971 image shows the basic Propulsion Module and attached elements in their functional configurations. The Space Tug program was cancelled and did not become a reality.

Biosafety principles and practices for the veterinary diagnostic laboratory.

PubMed

Kozlovac, Joseph; Schmitt, Beverly

2015-01-01

Good biosafety and biocontainment programs and practices are critical components of the successful operation of any veterinary diagnostic laboratory. In this chapter we provide information and guidance on critical biosafety management program elements, facility requirements, protective equipment, and procedures necessary to ensure that the laboratory worker and the environment are adequately protected in the challenging work environment of the veterinary diagnostic laboratory in general and provide specific guidance for those laboratories employing molecular diagnostic techniques.

XAP, a program for deconvolution and analysis of complex X-ray spectra

USGS Publications Warehouse

Quick, James E.; Haleby, Abdul Malik

1989-01-01

The X-ray analysis program (XAP) is a spectral-deconvolution program written in BASIC and specifically designed to analyze complex spectra produced by energy-dispersive X-ray analytical systems (EDS). XAP compensates for spectrometer drift, utilizes digital filtering to remove background from spectra, and solves for element abundances by least-squares, multiple-regression analysis. Rather than base analyses on only a few channels, broad spectral regions of a sample are reconstructed from standard reference spectra. The effects of this approach are (1) elimination of tedious spectrometer adjustments, (2) removal of background independent of sample composition, and (3) automatic correction for peak overlaps. Although the program was written specifically to operate a KEVEX 7000 X-ray fluorescence analytical system, it could be adapted (with minor modifications) to analyze spectra produced by scanning electron microscopes, electron microprobes, and probes, and X-ray defractometer patterns obtained from whole-rock powders.

Optimal design of structures with multiple design variables per group and multiple loading conditions on the personal computer

NASA Technical Reports Server (NTRS)

Nguyen, D. T.; Rogers, J. L., Jr.

1986-01-01

A finite element based programming system for minimum weight design of a truss-type structure subjected to displacement, stress, and lower and upper bounds on design variables is presented. The programming system consists of a number of independent processors, each performing a specific task. These processors, however, are interfaced through a well-organized data base, thus making the tasks of modifying, updating, or expanding the programming system much easier in a friendly environment provided by many inexpensive personal computers. The proposed software can be viewed as an important step in achieving a 'dummy' finite element for optimization. The programming system has been implemented on both large and small computers (such as VAX, CYBER, IBM-PC, and APPLE) although the focus is on the latter. Examples are presented to demonstrate the capabilities of the code. The present programming system can be used stand-alone or as part of the multilevel decomposition procedure to obtain optimum design for very large scale structural systems. Furthermore, other related research areas such as developing optimization algorithms (or in the larger level: a structural synthesis program) for future trends in using parallel computers may also benefit from this study.

Configuration management plan for waste tank farms and the 242-A evaporator of tank waste remediation system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laney, T.

The configuration management architecture presented in this Configuration Management Plan is based on the functional model established by DOE-STD-1073-93, ``Guide for Operational Configuration Management Program.`` The DOE Standard defines the configuration management program by the five basic program elements of ``program management,`` ``design requirements,`` ``document control,`` ``change control,`` and ``assessments,`` and the two adjunct recovery programs of ``design reconstitution,`` and ``material condition and aging management.`` The CM model of five elements and two adjunct programs strengthen the necessary technical and administrative control to establish and maintain a consistent technical relationship among the requirements, physical configuration, and documentation. Although the DOEmore » Standard was originally developed for the operational phase of nuclear facilities, this plan has the flexibility to be adapted and applied to all life-cycle phases of both nuclear and non-nuclear facilities. The configuration management criteria presented in this plan endorses the DOE Standard and has been tailored specifically to address the technical relationship of requirements, physical configuration, and documentation during the full life cycle of the Waste Tank Farms and 242-A Evaporator of Tank Waste Remediation System.« less

Mandatory communication training of all employees with patient contact.

PubMed

Ammentorp, Jette; Graugaard, Lars Toke; Lau, Marianne Engelbrecht; Andersen, Troels Præst; Waidtløw, Karin; Kofoed, Poul-Erik

2014-06-01

In 2010 a communication program that included mandatory communication skills training for all employees with patient contact was developed and launched at a large regional hospital in Denmark. We describe the communication program, the implementation process, and the initial assessment of the process to date. The cornerstone of the program is a communication course based on the Calgary Cambridge Guide and on the experiences of several efficacy and effectiveness studies conducted at the same hospital. The specific elements of the program are described in steps and a preliminary assessment based on feedback from the departments will be presented. The elements of the communication program are as follows: (1) education of trainers; (2) courses for health professionals employed in clinical departments; (3) education of new staff; (4) courses for health professionals in service departments; and (5) maintenance of communication skills. Thus far, 70 of 86 staff have become certified trainers and 17 of 18 departments have been included in the program. Even though the communication program is resource-intensive and competes with several other development projects in the clinical departments, the experiences of the staff and the managers are positive and the program continues as planned. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Advanced Platform Systems Technology study. Volume 4: Technology advancement program plan

NASA Technical Reports Server (NTRS)

1983-01-01

An overview study of the major technology definition tasks and subtasks along with their interfaces and interrelationships is presented. Although not specifically indicated in the diagram, iterations were required at many steps to finalize the results. The development of the integrated technology advancement plan was initiated by using the results of the previous two tasks, i.e., the trade studies and the preliminary cost and schedule estimates for the selected technologies. Descriptions for the development of each viable technology advancement was drawn from the trade studies. Additionally, a logic flow diagram depicting the steps in developing each technology element was developed along with descriptions for each of the major elements. Next, major elements of the logic flow diagrams were time phased, and that allowed the definition of a technology development schedule that was consistent with the space station program schedule when possible. Schedules show the major milestone including tests required as described in the logic flow diagrams.

A Lean Six Sigma quality improvement project to increase discharge paperwork completeness for admission to a comprehensive integrated inpatient rehabilitation program.

PubMed

Neufeld, Nathan J; Hoyer, Erik H; Cabahug, Philippines; González-Fernández, Marlís; Mehta, Megha; Walker, N Colbey; Powers, Richard L; Mayer, R Samuel

2013-01-01

Lean Six Sigma (LSS) process analysis can be used to increase completeness of discharge summary reports used as a critical communication tool when a patient transitions between levels of care. The authors used the LSS methodology as an intervention to improve systems process. Over the course of the project, 8 required elements were analyzed in the discharge paperwork. The authors analyzed the discharge paperwork of patients (42 patients preintervention and 143 patients postintervention) of a comprehensive integrated inpatient rehabilitation program (CIIRP). Prior to this LSS project, 61.8% of required discharge elements were present. The intervention improved the completeness to 94.2% of the required elements. The percentage of charts that were 100% complete increased from 11.9% to 67.8%. LSS is a well-established process improvement methodology that can be used to make significant improvements in complex health care workflow issues. Specifically, the completeness of discharge documentation required for transition of care to CIIRP can be improved.

41 CFR 60-2.17 - Additional required elements of affirmative action programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... elements of affirmative action programs. 60-2.17 Section 60-2.17 Public Contracts and Property Management... Action Programs § 60-2.17 Additional required elements of affirmative action programs. In addition to the elements required by § 60-2.10 through § 60-2.16, an acceptable affirmative action program must include the...

41 CFR 60-2.17 - Additional required elements of affirmative action programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... elements of affirmative action programs. 60-2.17 Section 60-2.17 Public Contracts and Property Management... Action Programs § 60-2.17 Additional required elements of affirmative action programs. In addition to the elements required by § 60-2.10 through § 60-2.16, an acceptable affirmative action program must include the...

41 CFR 60-2.17 - Additional required elements of affirmative action programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... elements of affirmative action programs. 60-2.17 Section 60-2.17 Public Contracts and Property Management... Action Programs § 60-2.17 Additional required elements of affirmative action programs. In addition to the elements required by § 60-2.10 through § 60-2.16, an acceptable affirmative action program must include the...

Microgravity research in NASA ground-based facilities

NASA Technical Reports Server (NTRS)

Lekan, Jack

1989-01-01

An overview of reduced gravity research performed in NASA ground-based facilities sponsored by the Microgravity Science and Applications Program of the NASA Office of Space Science and Applications is presented. A brief description and summary of the operations and capabilities of each of these facilities along with an overview of the historical usage of them is included. The goals and program elements of the Microgravity Science and Applications programs are described and the specific programs that utilize the low gravity facilities are identified. Results from two particular investigations in combustion (flame spread over solid fuels) and fluid physics (gas-liquid flows at microgravity conditions) are presented.

Brayton advanced heat receiver development program

NASA Technical Reports Server (NTRS)

Heidenreich, G. R.; Downing, R. S.; Lacey, Dovie E.

1989-01-01

NASA Lewis Research Center is managing an advanced solar dynamic (ASD) space power program. The objective of the ASD program is to develop small and lightweight solar dynamic systems which show significant improvement in efficiency and specific mass over the baseline design derived from the Space Station Freedom technology. The advanced heat receiver development program is a phased program to design, fabricate and test elements of a 7-kWe heat-receiver/thermal-energy-storage subsystem. Receivers for both Brayton and Stirling heat engines are being developed under separate contracts. Phase I, described here, is the current eighteen month effort to design and perform critical technology experiments on innovative concepts designed to reduce mass without compromising thermal efficiency and reliability.

Handbook of estimating data, factors, and procedures. [for manufacturing cost studies

NASA Technical Reports Server (NTRS)

Freeman, L. M.

1977-01-01

Elements to be considered in estimating production costs are discussed in this manual. Guidelines, objectives, and methods for analyzing requirements and work structure are given. Time standards for specific specfic operations are listed for machining, sheet metal working, electroplating and metal treating; painting; silk screening, etching and encapsulating; coil winding; wire preparation and wiring; soldering; and the fabrication of etched circuits and terminal boards. The relation of the various elements of cost to the total cost as proposed for various programs by various contractors is compared with government estimates.

Using computer graphics to design Space Station Freedom viewing

NASA Technical Reports Server (NTRS)

Goldsberry, B. S.; Lippert, B. O.; Mckee, S. D.; Lewis, J. L., Jr.; Mount, F. E.

1989-01-01

An important aspect of planning for Space Station Freedom at the United States National Aeronautics and Space Administration (NASA) is the placement of the viewing windows and cameras for optimum crewmember use. Researchers and analysts are evaluating the placement options using a three-dimensional graphics program called PLAID. This program, developed at the NASA Johnson Space Center (JSC), is being used to determine the extent to which the viewing requirements for assembly and operations are being met. A variety of window placement options in specific modules are assessed for accessibility. In addition, window and camera placements are analyzed to insure that viewing areas are not obstructed by the truss assemblies, externally-mounted payloads, or any other station element. Other factors being examined include anthropometric design considerations, workstation interfaces, structural issues, and mechanical elements.

Preliminary analysis of an extensive one year survey of trace elements and compounds in the suspended particulate matter in Cleveland, Ohio

NASA Technical Reports Server (NTRS)

King, R. B.; Fordyce, J. S.; Antoine, A. C.; Leibecki, H. F.; Neustadter, H. E.; Sidik, S. M.; Burr, J. C.; Craig, G. T.; Cornett, C. L.

1974-01-01

Beginning in 1971 a cooperative program has been carried on by the City of Cleveland Division of Air Pollution Control and NASA Lewis Research Center to study the trace element and compound concentrations in the ambient suspended particulate matter in Cleveland Ohio as a function of source, monitoring location and meteorological conditions. The major objectives were to determine the ambient concentration levels at representative urban sites and to develop a technique using trace element and compound data in conjunction with meteorological conditions to identify specific pollution sources which could be developed into a practical system that could be readily utilized by an enforcement agency.

Comparison of Canadian and Swiss Surgical Training Curricula: Moving on Toward Competency-Based Surgical Education.

PubMed

Hoffmann, Henry; Oertli, Daniel; Mechera, Robert; Dell-Kuster, Salome; Rosenthal, Rachel; Reznick, Richard; MacDonald, Hugh

Quality of surgical training in the era of resident duty-hour restrictions (RDHR) is part of an ongoing debate. Most training elements are provided during surgical service. As exposure to surgical procedures is important but time-consuming, RDHR may affect quality of surgical training. Providing structured training elements may help to compensate for this shortcoming. This binational anonymous questionnaire-based study evaluates frequency, time, and structure of surgical training programs at 2 typical academic teaching hospitals with different RDHR. Departments of Surgery of University of Basel (Basel, Switzerland) and the Queen's University (Kingston, Ontario, Canada). Surgical consultants and residents of the Queen's University Hospital (Kingston, Ontario, Canada) and the University Hospital Basel (Basel, Switzerland) were eligible for this study. Questionnaire response rate was 37% (105/284). Queen's residents work 80 hours per week, receiving 7 hours of formal training (8.8% of workweek). Basel residents work 60 hours per week, including 1 hour of formal training (1.7% of working time). Queen's faculty and residents rated their program as "structured" or "rather structured" in contrast to Basel faculty and residents who rated their programs as "neutral" in structure or "unstructured." Respondents identified specific structured training elements more frequently at Queen's than in Basel. Two-thirds of residents responded that they seek out additional surgical experiences through voluntary extra work. Basel participants articulated a stronger need for improvement of current surgical training. Although Basel residents and consultants in both institutions fear negative influence of RDHR on the training program, this was not the case in Queen's residents. Providing more structured surgical training elements may be advantageous in providing optimal-quality surgical education in an era of work-hour restrictions. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

ALGORITHM FOR SORTING GROUPED DATA

NASA Technical Reports Server (NTRS)

Evans, J. D.

1994-01-01

It is often desirable to sort data sets in ascending or descending order. This becomes more difficult for grouped data, i.e., multiple sets of data, where each set of data involves several measurements or related elements. The sort becomes increasingly cumbersome when more than a few elements exist for each data set. In order to achieve an efficient sorting process, an algorithm has been devised in which the maximum most significant element is found, and then compared to each element in succession. The program was written to handle the daily temperature readings of the Voyager spacecraft, particularly those related to the special tracking requirements of Voyager 2. By reducing each data set to a single representative number, the sorting process becomes very easy. The first step in the process is to reduce the data set of width 'n' to a data set of width '1'. This is done by representing each data set by a polynomial of length 'n' based on the differences of the maximum and minimum elements. These single numbers are then sorted and converted back to obtain the original data sets. Required input data are the name of the data file to read and sort, and the starting and ending record numbers. The package includes a sample data file, containing 500 sets of data with 5 elements in each set. This program will perform a sort of the 500 data sets in 3 - 5 seconds on an IBM PC-AT with a hard disk; on a similarly equipped IBM PC-XT the time is under 10 seconds. This program is written in BASIC (specifically the Microsoft QuickBasic compiler) for interactive execution and has been implemented on the IBM PC computer series operating under PC-DOS with a central memory requirement of approximately 40K of 8 bit bytes. A hard disk is desirable for speed considerations, but is not required. This program was developed in 1986.

Modulation of tissue repair by regeneration enhancer elements.

PubMed

Kang, Junsu; Hu, Jianxin; Karra, Ravi; Dickson, Amy L; Tornini, Valerie A; Nachtrab, Gregory; Gemberling, Matthew; Goldman, Joseph A; Black, Brian L; Poss, Kenneth D

2016-04-14

How tissue regeneration programs are triggered by injury has received limited research attention. Here we investigate the existence of enhancer regulatory elements that are activated in regenerating tissue. Transcriptomic analyses reveal that leptin b (lepb) is highly induced in regenerating hearts and fins of zebrafish. Epigenetic profiling identified a short DNA sequence element upstream and distal to lepb that acquires open chromatin marks during regeneration and enables injury-dependent expression from minimal promoters. This element could activate expression in injured neonatal mouse tissues and was divisible into tissue-specific modules sufficient for expression in regenerating zebrafish fins or hearts. Simple enhancer-effector transgenes employing lepb-linked sequences upstream of pro- or anti-regenerative factors controlled the efficacy of regeneration in zebrafish. Our findings provide evidence for 'tissue regeneration enhancer elements' (TREEs) that trigger gene expression in injury sites and can be engineered to modulate the regenerative potential of vertebrate organs.

Veterans' Pain Management Goals: Changes During the Course of a Peer-led Pain Self-Management Program

PubMed Central

Bauer, Sarah M.; McGuire, Alan B.; Kukla, Marina; McGuire, Shannon; Bair, Matthew J.; Matthias, Marianne S.

2017-01-01

Objective Goal setting is a common element of self-management support programs; however, little is known about the nature of patients' goals or how goals change during pain self-management. The purpose of the current study is to explore how patients' goals and views of goal setting change over the course of a peer-led pain self-management program. Methods Veterans (n = 16) completing a 4-month peer-led pain self-management program completed semi-structured interviews at baseline and follow-up regarding their goals for their pain. Interviews were analyzed using immersion/crystallization. Results Analyses revealed six themes: motivation to do something for their pain, more goal-oriented, actually setting goals, clarity of goal importance, more specific/measurable goal criteria, and more specific/measurable strategies. Conclusion The current analyses illustrate how participants' goals can evolve over the course of a peer-led pain self-management program. Specifically, increased motivation, more openness to using goals, greater clarity of goal importance, more specific and measurable goals and strategies, and the influence of the peer coach relationship were described by participants. Practice implications Pain self-management interventions should emphasize goal setting, and development of specific, measurable goals and plans. Trainings for providers should address the potential for the provider-patient relationship, particularly peer providers, to facilitate motivation and goal setting. PMID:27516437

Veterans' pain management goals: Changes during the course of a peer-led pain self-management program.

PubMed

Bauer, Sarah M; McGuire, Alan B; Kukla, Marina; McGuire, Shannon; Bair, Matthew J; Matthias, Marianne S

2016-12-01

Goal setting is a common element of self-management support programs; however, little is known about the nature of patients' goals or how goals change during pain self-management. The purpose of the current study is to explore how patients' goals and views of goal setting change over the course of a peer-led pain self-management program. Veterans (n=16) completing a 4-month peer-led pain self-management program completed semi-structured interviews at baseline and follow-up regarding their goals for their pain. Interviews were analyzed using immersion/crystallization. Analyses revealed six themes: motivation to do something for their pain, more goal-oriented, actually setting goals, clarity of goal importance, more specific/measurable goal criteria, and more specific/measurable strategies. The current analyses illustrate how participants' goals can evolve over the course of a peer-led pain self-management program. Specifically, increased motivation, more openness to using goals, greater clarity of goal importance, more specific and measurable goals and strategies, and the influence of the peer coach relationship were described by participants. Pain self-management interventions should emphasize goal setting, and development of specific, measurable goals and plans. Trainings for providers should address the potential for the provider-patient relationship, particularly peer providers, to facilitate motivation and goal setting. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

40 CFR 123.21 - Elements of a program submission.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 22 2011-07-01 2011-07-01 false Elements of a program submission. 123.21 Section 123.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS State Program Submissions § 123.21 Elements of a program submission. (a...

40 CFR 123.21 - Elements of a program submission.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Elements of a program submission. 123.21 Section 123.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS State Program Submissions § 123.21 Elements of a program submission. (a...

40 CFR 123.21 - Elements of a program submission.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 23 2012-07-01 2012-07-01 false Elements of a program submission. 123.21 Section 123.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS State Program Submissions § 123.21 Elements of a program submission. (a...

40 CFR 123.21 - Elements of a program submission.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 22 2014-07-01 2013-07-01 true Elements of a program submission. 123.21 Section 123.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS State Program Submissions § 123.21 Elements of a program submission. (a...

40 CFR 123.21 - Elements of a program submission.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 23 2013-07-01 2013-07-01 false Elements of a program submission. 123.21 Section 123.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS State Program Submissions § 123.21 Elements of a program submission. (a...

Network operating system focus technology

NASA Technical Reports Server (NTRS)

1985-01-01

An activity structured to provide specific design requirements and specifications for the Space Station Data Management System (DMS) Network Operating System (NOS) is outlined. Examples are given of the types of supporting studies and implementation tasks presently underway to realize a DMS test bed capability to develop hands-on understanding of NOS requirements as driven by actual subsystem test beds participating in the overall Johnson Space Center test bed program. Classical operating system elements and principal NOS functions are listed.

Characterization of Steroid Receptor RNA Activator Protein Function in Modulating the Estrogen Signaling Pathway

DTIC Science & Technology

2007-05-01

Signaling Pathway 5b. GRANT NUMBER W81XWH-05-1-0245 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER Yi Yan 5e. TASK NUMBER...negative control to identify proteins non-specifically precipitated. Tandem mass spectrometric analysis of immunoprecipitated samples identified a...immunoprecipitated sample and negative control. It is important to note that, SRAP was present among the remaining specifically precipitated 87 proteins. Using the

76 FR 69755 - National Customs Automation Program Test Concerning Automated Commercial Environment (ACE...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... include functionality specific to the filing of entry data for formal and informal consumption entries... three (3) optional data elements to CBP at any time prior to the arrival of the merchandise on the conveyance transporting the cargo to the United States. This data will fulfill merchandise entry requirements...

A 20-Year Examination of the Perceptions of Business School Interns: A Longitudinal Case Study

ERIC Educational Resources Information Center

Cook, Sherry James; Stokes, Amy; Parker, Richard Stephen

2015-01-01

The authors examined students' attitudes toward specific elements of an ongoing internship program. The study sample consisted of 816 student interns from 25 different colleges and universities. Results indicate that despite significant changes in instructional design and the incorporation of new technologies into the learning environment,…

iTAK: A program for genome-wide prediction and classification of plant transcription factors, transcriptional regulators and protein kinases

USDA-ARS?s Scientific Manuscript database

Transcription factors (TFs) are proteins that regulate the expression of target genes by binding to specific elements in their regulatory regions. Transcriptional regulators (TRs) also regulate the expression of target genes; however, they operate indirectly via interaction with the basal transcript...

Diphthong Changes in Style Shifting from Southern English to Standard American English.

ERIC Educational Resources Information Center

Weil, Karen S.; Fitch, James L.; Wolfe, Virginia I.

2000-01-01

Specific diphthongs were produced by four individuals from the coastal southern dialect region who were selected from among those who had successfully completed an accent-reduction program. Results showed that diphthongs used in Southern English were shorter and had less noticeable transitional elements than those in Standard American English.…

49 CFR Appendix to Subpart G of... - Required Knowledge and Skills-Sample Guidelines

Code of Federal Regulations, 2010 CFR

2010-10-01

... knowledge and skills tests that it administers to CDL applicants. This appendix closely follows the... discretion provided their CDL program tests for the general areas of knowledge and skill specified in §§ 383.111 and 383.113. Examples of specific knowledge elements (a) Safe operations regulations. Driver...

Collaborative Approaches to Deepen Student Learning: Information Literacy, Curriculum Design, and Student Learning Workshops

ERIC Educational Resources Information Center

Hurvitz, Tate; Benvau, Roxane; Parry, Megan

2015-01-01

Creating a collaborative environment across student services and instruction is often more challenging than it may first seem. Although effective collaboration is context specific, keeping student learning at the center of the work is a powerful element in successful collaborations. Grossmont College's first year experience program has attempted…

Administrative Procedures for the Fort Lincoln Schools. Fort Lincoln New Town Education System.

ERIC Educational Resources Information Center

General Learning Corp., Washington, DC.

This is an operating manual for administration of the educational program to be used by the staff of the Fort Lincoln First Facility. It details specifications regarding information flow, storage, output, time cycles, staffing provisions, authority and responsibility provisions. An effort has been made to include those elements critical to…

Active Listening in Peer Interviews: The Influence of Message Paraphrasing on Perceptions of Listening Skill

ERIC Educational Resources Information Center

Weger, Harry, Jr.; Castle, Gina R.; Emmett, Melissa C.

2010-01-01

Perhaps no communication skill is identified as regularly as active listening in training programs across a variety of disciplines and activities. Yet little empirical research has examined specific elements of active listening responses in terms of their effectiveness in achieving desired interpersonal outcomes. This study reports an experiment…

Automatic Dynamic Aircraft Modeler (ADAM) for the Computer Program NASTRAN

NASA Technical Reports Server (NTRS)

Griffis, H.

1985-01-01

Large general purpose finite element programs require users to develop large quantities of input data. General purpose pre-processors are used to decrease the effort required to develop structural models. Further reduction of effort can be achieved by specific application pre-processors. Automatic Dynamic Aircraft Modeler (ADAM) is one such application specific pre-processor. General purpose pre-processors use points, lines and surfaces to describe geometric shapes. Specifying that ADAM is used only for aircraft structures allows generic structural sections, wing boxes and bodies, to be pre-defined. Hence with only gross dimensions, thicknesses, material properties and pre-defined boundary conditions a complete model of an aircraft can be created.

Resolving Heart Regeneration by Replacement Histone Profiling.

PubMed

Goldman, Joseph Aaron; Kuzu, Guray; Lee, Nutishia; Karasik, Jaclyn; Gemberling, Matthew; Foglia, Matthew J; Karra, Ravi; Dickson, Amy L; Sun, Fei; Tolstorukov, Michael Y; Poss, Kenneth D

2017-02-27

Chromatin regulation is a principal mechanism governing animal development, yet it is unclear to what extent structural changes in chromatin underlie tissue regeneration. Non-mammalian vertebrates such as zebrafish activate cardiomyocyte (CM) division after tissue damage to regenerate lost heart muscle. Here, we generated transgenic zebrafish expressing a biotinylatable H3.3 histone variant in CMs and derived cell-type-specific profiles of histone replacement. We identified an emerging program of putative enhancers that revise H3.3 occupancy during regeneration, overlaid upon a genome-wide reduction of H3.3 from promoters. In transgenic reporter lines, H3.3-enriched elements directed gene expression in subpopulations of CMs. Other elements increased H3.3 enrichment and displayed enhancer activity in settings of injury- and/or Neuregulin1-elicited CM proliferation. Dozens of consensus sequence motifs containing predicted transcription factor binding sites were enriched in genomic regions with regeneration-responsive H3.3 occupancy. Thus, cell-type-specific regulatory programs of tissue regeneration can be revealed by genome-wide H3.3 profiling. Copyright © 2017 Elsevier Inc. All rights reserved.

Balancing entrepreneurship and business practices for e-collaboration: responsible information sharing in academic research.

PubMed

Porter, Mark W; Porter, Mark William; Milley, David; Oliveti, Kristyn; Ladd, Allen; O'Hara, Ryan J; Desai, Bimal R; White, Peter S

2008-11-06

Flexible, highly accessible collaboration tools can inherently conflict with controls placed on information sharing by offices charged with privacy protection, compliance, and maintenance of the general business environment. Our implementation of a commercial enterprise wiki within the academic research environment addresses concerns of all involved through the development of a robust user training program, a suite of software customizations that enhance security elements, a robust auditing program, allowance for inter-institutional wiki collaboration, and wiki-specific governance.

Reference earth orbital research and applications investigations (blue book). Volume 4: Earth observations

NASA Technical Reports Server (NTRS)

1971-01-01

The earth observations capability of the space station and space shuttle program definition is discussed. The stress in the functional program element has been to update the sensor specifications and to shift some of the emphasis from sensors to experiments to be done aboard the facility. The earth observations facility will include provisions for data acquisition, sensor control and display, data analysis, and maintenance and repair. The facility is research and development in nature with a potential for operational applications.

By Land or By Sea: An Analysis of National Missile Defense Options

DTIC Science & Technology

2000-01-01

technology evolves x and the design and specifications for elements of both systems change, having an understanding of the concepts will allow...successful program, the Nike-Zeus system claimed thirteen successful intercepts of ballistic missiles. As the program developed, Nike-Zeus became Nike- X ...5 11,185 14.56 X -33 single stage to orbit prototype 5.2 11,521 15 Nominal V(bo) GBI 6 13,422 17.48 Notional ICBM 10000 7.2 16,106 20.98 Space

After The Demonstration: What States Sustained After the End of Federal Grants to Improve Children’s Health Care Quality

PubMed Central

Brach, Cindy; Anglin, Grace; Devers, Kelly J.; Burton, Rachel

2018-01-01

Introduction Under the CHIPRA Quality Demonstration Grant Program, CMS awarded $100 million through 10 grants that 18 state Medicaid agencies implemented between 2010 and 2015. The program’s legislatively-mandated purpose was to evaluate promising ideas for improving the quality of children’s health care provided through Medicaid and CHIP. As part of the program’s multifaceted evaluation, this study examined the extent to which states sustained key program activities after the demonstration ended. Methods We identified 115 potentially sustainable elements within states’ CHIPRA demonstrations and analyzed data from grantee reports and key informant interviews to assess sustainment outcomes and key influential factors. We also assessed sustainment of the projects’ intellectual capital. Results 56% of potentially sustainable elements were sustained. Sustainment varied by topic area: Elements related to quality measure reporting and practice facilitation were more likely to be sustained than others, such as parent advisors. Broad contextual factors, the state’s Medicaid environment, implementation partners’ resources, and characteristics of the demonstration itself all shaped sustainment outcomes. Discussion Assessing sustainment of key elements of states’ CHIPRA quality demonstration projects provides insight into the fates of the “promising ideas” that the grant program was designed to examine. As a result of the federal government’s investment in this grant program, many demonstration states are in a strong position to extend and spread specific strategies for improving the quality of care for children in Medicaid and CHIP. Our findings provide insights for policymakers and providers working to improve the quality of health care for low income children. PMID:29119478

Seal Joint Analysis and Design for the Ares-I Upper Stage LOX Tank

NASA Technical Reports Server (NTRS)

Phillips, Dawn R.; Wingate, Robert J.

2011-01-01

The sealing capability of the Ares-I Upper Stage liquid oxygen tank-to-sump joint is assessed by analyzing the deflections of the joint components. Analyses are performed using three-dimensional symmetric wedge finite element models and the ABAQUS commercial finite element software. For the pressure loads and feedline interface loads, the analyses employ a mixed factor of safety approach to comply with the Constellation Program factor of safety requirements. Naflex pressure-assisted seals are considered first because they have been used successfully in similar seal joints in the Space Shuttle External Tank. For the baseline sump seal joint configuration with a Naflex seal, the predicted joint opening greatly exceeds the seal design specification. Three redesign options of the joint that maintain the use of a Naflex seal are studied. The joint openings for the redesigned seal joints show improvement over the baseline configuration; however, these joint openings still exceed the seal design specification. RACO pressure-assisted seals are considered next because they are known to also be used on the Space Shuttle External Tank, and the joint opening allowable is much larger than the specification for the Naflex seals. The finite element models for the RACO seal analyses are created by modifying the models that were used for the Naflex seal analyses. The analyses show that the RACO seal may provide sufficient sealing capability for the sump seal joint. The results provide reasonable data to recommend the design change and plan a testing program to determine the capability of RACO seals in the Ares-I Upper Stage liquid oxygen tank sump seal joint.

Monitoring in the nearshore: A process for making reasoned decisions

USGS Publications Warehouse

Bodkin, James L.; Dean, T.A.

2003-01-01

Over the past several years, a conceptual framework for the GEM nearshore monitoring program has been developed through a series of workshops. However, details of the proposed monitoring program, e.g. what to sample, where to sample, when to sample and at how many sites, have yet to be determined. In FY 03 we were funded under Project 03687 to outline a process whereby specific alternatives to monitoring are developed and presented to the EVOS Trustee Council for consideration. As part of this process, two key elements are required before reasoned decisions can be made. These are: 1) a comprehensive historical perspective of locations and types of past studies conducted in the nearshore marine communities within Gulf of Alaska, and 2) estimates of costs for each element of a proposed monitoring program. We have developed a GIS database that details available information from past studies of selected nearshore habitats and species in the Gulf of Alaska and provide a visual means of selecting sites based (in part) on the locations for which historical data of interest are available. We also provide cost estimates for specific monitoring plan alternatives and outline several alternative plans that can be accomplished within reasonable budgetary constraints. The products that we will provide are: 1) A GIS database and maps showing the location and types of information available from the nearshore in the Gulf of Alaska; 2) A list of several specific monitoring alternatives that can be conducted within reasonable budgetary constraints; and 3) Cost estimates for proposed tasks to be conducted as part of the nearshore program. Because data compilation and management will not be completed until late in FY03 we are requesting support for close-out of this project in FY 04.

User assembly and servicing system for Space Station, an evolving architecture approach

NASA Technical Reports Server (NTRS)

Lavigna, Thomas A.; Cline, Helmut P.

1988-01-01

On-orbit assembly and servicing of a variety of scientific and applications hardware systems is expected to be one of the Space Station's primary functions. The hardware to be serviced will include the attached payloads resident on the Space Station, the free-flying satellites and co-orbiting platforms brought to the Space Station, and the polar orbiting platforms. The requirements for assembly and servicing such a broad spectrum of missions have led to the development of an Assembly and Servicing System Architecture that is composed of a complex array of support elements. This array is comprised of US elements, both Space Station and non-Space Station, and elements provided by Canada to the Space Station Program. For any given servicing or assembly mission, the necessary support elements will be employed in an integrated manner to satisfy the mission-specific needs. The structure of the User Assembly and Servicing System Architecture and the manner in which it will evolved throughout the duration of the phased Space Station Program are discussed. Particular emphasis will be placed upon the requirements to be accommodated in each phase, and the development of a logical progression of capabilities to meet these requirements.

ALARA implementation throughout project life cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haynes, M.J.

1995-03-01

A strength of radiation protection programs generally has been endorsement and application of the ALARA principle. In Ontario Hydro, which currently operates 20 commercial size nuclear units, great strides have been made in the last three decades in reducing occupational radiation exposure per unit of electricity generated. This paper will discuss specific applications of elements of the overall ALARA program which have most contributed to dose reduction as the nuclear program has expanded. This includes such things as management commitment, ALARA application in the design phase and major rehabilitation work, the benefits of the self protection concept, a specific examplemore » of elimination (or reduction) of the source term and the importance of dose targets. Finally, it is concluded that the major opportunities for further improvements may lie in the area of information management.« less

Utilization of DR1 as true RARE in regulating the Ssm, a novel retinoic acid-target gene in the mouse testis.

PubMed

Han, Kyuyong; Song, Haengseok; Moon, Irene; Augustin, Robert; Moley, Kelle; Rogers, Melissa; Lim, Hyunjung

2007-03-01

Various nuclear receptors form dimers to activate target genes via specific response elements located within promoters or enhancers. Retinoid X receptor (RXR) serves as a dimerization partner for many nuclear receptors including retinoic acid receptor (RAR) and peroxisome proliferator-activated receptor (PPAR). Dimers show differential preference towards directly repeated response elements with 1-5 nucleotide spacing, and direct repeat 1 (DR1) is a promiscuous element which recruits RAR/RXR, RXR/RXR, and PPAR/RXR in vitro. In the present investigation, we report identification of a novel RAR/RXR target gene which is regulated by DR1s in the promoter region. This gene, namely spermatocyte-specific marker (Ssm), recruits all the three combinations of nuclear receptors in vitro, but in vivo regulation is observed by trans-retinoic acid-activated RAR/RXR dimer. Indeed, chromatin immunoprecipitation experiment demonstrates binding of RARbeta and RXRalpha in the promoter region of the Ssm. Interestingly, expression of Ssm is almost exclusively observed in spermatocytes in the adult mouse testis, where RA signaling is known to regulate developmental program of male germ cells. The results show that Ssm is a RAR/RXR target gene uniquely using DR1 and exhibits stage-specific expression in the mouse testis with potential function in later stages of spermatogenesis. This finding exemplifies usage of DR1s as retinoic acid response element (RARE) under a specific in vivo context.

NASA's Chemical Transfer Propulsion Program for Pathfinder

NASA Technical Reports Server (NTRS)

Hannum, Ned P.; Berkopec, Frank D.; Zurawski, Robert L.

1989-01-01

Pathfinder is a research and technology project, with specific deliverables, initiated by the National Aeronautics and Space Administration (NASA) which will strengthen the technology base of the United States civil space program in preparation for future space exploration missions. Pathfinder begins in Fiscal Year 1989, and is to advance a collection of critical technologies for these missions and ensure technology readiness for future national decisions regarding exploration of the solar system. The four major thrusts of Pathfinder are: surface exploration, in-space operations, humans-in-space, and space transfer. The space transfer thrust will provide the critical technologies needed for transportation to, and return from, the Moon, Mars, and other planets in the solar system, as well as for reliable and cost-effective Earth-orbit operations. A key element of this thrust is the Chemical Transfer Propulsion program which will provide the propulsion technology for high performance, liquid oxygen/liquid hydrogen expander cycle engines which may be operated and maintained in space. Described here are the program overview including the goals and objectives, management, technical plan, and technology transfer for the Chemical Transfer Propulsion element of Pathfinder.

Quality management and the work environment: an empirical investigation in a public sector organization.

PubMed

Taveira, Alvaro D; James, Craig A; Karsh, Ben -Tzion; Sainfort, François

2003-07-01

The integration of quality management initiatives, particularly total quality management (TQM), and ergonomics has received increasing attention from scholars and practitioners. Above all, the question of how TQM programs relate to ergonomic aspects of organizational design and culture is at the center of this discussion. This study examines how elements of a "typical", Deming-inspired, TQM program in the public sector interact with the work environment. Elements of the TQM program were defined and measured using the Malcom Baldridge Award criteria. The specific elements examined were "Management Support of Quality", "Information and Analysis", "Human Resources", "Processes and Quality Results", and "Customer Focus and Satisfaction". The relationship between these TQM elements and the work environment were defined through five separate hypotheses. The work environment was described by the constructs "Supervisor Support", "Task Clarity", "Task Orientation", and "Innovation". Data were obtained through survey questionnaires administered to employees of four departments in a municipal government organization. Results supported three of the hypotheses, but produced some unanticipated outcomes with regard to the other two. Namely, "Management Support of Quality" was significantly related to "Supervisor Support", "Task Orientation", "Task Clarity" and "Innovation"; "Human Resources" was significantly related to "Supervisor Support"; "Processes and Quality Results" was significantly related to "Task Orientation" and "Innovation". Contrary to predicted "Information and Analysis" was negatively related to "Innovation", and "Customer Focus" was unrelated to any of the outcome variables. The relationships between these TQM elements and work environment dimensions are discussed. Implications for TQM and ergonomic practice are analyzed, and directions for future research proposed.

Transition Core Properties during Conversion of the NBSR from HEU to LEU Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanson, A. L.; Diamond, D.

2013-10-31

The transition of the NBSR from HEU to LEU fuel is challenging due to reactivity constraints and the need to maintain an uninterrupted science program, the mission of the NBSR. The transition cannot occur with a full change of HEU to LEU fuel elements since the excess reactivity would be large enough that the NBSR would violate the technical specification for shutdown margin. Manufacturing LEU fuel elements to represent irradiated fuel elements would be cost prohibitive since 26 one-of-a-kind fuel elements would need to be manufactured. For this report a gradual transition from the present HEU fuel to the proposedmore » LEU fuel was studied. The gradual change approach would follow the present fuel management scheme and replace four HEU fuel elements with four LEU fuel elements each cycle. This manuscript reports the results of a series of calculations to predict the neutronic characteristics and how the neutronics will change during the transition from HEU to LEU in the NBSR.« less

Reinforced Carbon Carbon (RCC) oxidation resistant material samples - Baseline coated, and baseline coated with tetraethyl orthosilicate (TEOS) impregnation

NASA Technical Reports Server (NTRS)

Gantz, E. E.

1977-01-01

Reinforced carbon-carbon material specimens were machined from 19 and 33 ply flat panels which were fabricated and processed in accordance with the specifications and procedures accepted for the fabrication and processing of the leading edge structural subsystem (LESS) elements for the space shuttle orbiter. The specimens were then baseline coated and tetraethyl orthosilicate impregnated, as applicable, in accordance with the procedures and requirements of the appropriate LESS production specifications. Three heater bars were ATJ graphite silicon carbide coated with the Vought 'pack cementation' coating process, and three were stackpole grade 2020 graphite silicon carbide coated with the chemical vapor deposition process utilized by Vought in coating the LESS shell development program entry heater elements. Nondestructive test results are reported.

Addition of higher order plate and shell elements into NASTRAN computer program

NASA Technical Reports Server (NTRS)

Narayanaswami, R.; Goglia, G. L.

1976-01-01

Two higher order plate elements, the linear strain triangular membrane element and the quintic bending element, along with a shallow shell element, suitable for inclusion into the NASTRAN (NASA Structural Analysis) program are described. Additions to the NASTRAN Theoretical Manual, Users' Manual, Programmers' Manual and the NASTRAN Demonstration Problem Manual, for inclusion of these elements into the NASTRAN program are also presented.

Computer Aided Modeling to Determine the Effectiveness of Resistive Exercises as Countermeasures for Bone Mineral Density Loss

NASA Technical Reports Server (NTRS)

Murphy, Benjamin M.

1999-01-01

Due to the loss of gravitational loading, astronauts have a tendency to lose bone mineral density in their lumbar spine and lower extremities on orbit. NASA requires astronauts to perform exercises during space flight to help reduce the amount of demineralization. To test these exercises on earth, 17 week bed rest studies are conducted that consist of specific diet and exercise regimes. Developing a finite element model of these exercises will help to quantify the stress distribution imposed by of each of these exercises. To help develop this model, MRI images are acquired from individuals participating in the bed rest studies. The MRIs can be used to create a subject specific model of each individual for testing. The MRIs are processed in the Magnetic Resonance Imaging Data Transfer System program to develop a three-dimensional finite element model of the femur for evaluation. Modifications were made to the MRIDTS that simplified the model creation process. These modifications made it possible to construct two separate models of different portions of a bone simultaneously and then later connect them manually. This helped alleviate the warping problem associated with the drastic changes in geometry found in some body parts, such as the joints. The code was also modified to incorporate material properties of various bone components into the model. Interior meshing was also incorporated into the program to allow for both the cortical shell and the entire bone to be modeled. A prototype model of the right femur of an adult female is being constructed and tested to determine the feasibility of finite element analysis as a tool for evaluating exercise effectiveness. The model is being run through the ANSYS finite element program on the Alabama Super Computer Network. After the model is validated, models of bedrest subjects can be generated to investigate exercise countermeasures.

40 CFR 145.22 - Elements of a program submission.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Elements of a program submission. 145.22 Section 145.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE UIC PROGRAM REQUIREMENTS State Program Submissions § 145.22 Elements of a...

40 CFR 145.22 - Elements of a program submission.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Elements of a program submission. 145.22 Section 145.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE UIC PROGRAM REQUIREMENTS State Program Submissions § 145.22 Elements of a...

40 CFR 145.22 - Elements of a program submission.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Elements of a program submission. 145.22 Section 145.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE UIC PROGRAM REQUIREMENTS State Program Submissions § 145.22 Elements of a...

40 CFR 145.22 - Elements of a program submission.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Elements of a program submission. 145.22 Section 145.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE UIC PROGRAM REQUIREMENTS State Program Submissions § 145.22 Elements of a...

40 CFR 145.22 - Elements of a program submission.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 23 2014-07-01 2014-07-01 false Elements of a program submission. 145.22 Section 145.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE UIC PROGRAM REQUIREMENTS State Program Submissions § 145.22 Elements of a...

Integrating cultural values, beliefs, and customs into pregnancy and postpartum care: lessons learned from a Hawaiian public health nursing project.

PubMed

Mayberry, L J; Affonso, D D; Shibuya, J; Clemmens, D

1999-06-01

Determining the elements of culturally competent health care is an important goal for nurses. This goal is particularly integral in efforts to design better preventive health care strategies for pregnant and postpartum women from multiple cultural and ethnic backgrounds. Learning about the values, beliefs, and customs surrounding health among the targeted groups is essential, but integrating this knowledge into the actual health care services delivery system is more difficult. The success of a prenatal and postpartum program developed for native Hawaiian, Filipino, and Japanese women in Hawaii has been attributed to the attention on training, direct care giving, and program monitoring participation by local cultural and ethnic healers and neighborhood leaders living in the community, with coordination by public health nurses. This article profiles central design elements with examples of specific interventions used in the Malama Na Wahine or Caring for Pregnant Women program to illustrate a unique approach to the delivery of culturally competent care.

TAP 1: A Finite Element Program for Steady-State Thermal Analysis of Convectively Cooled Structures

NASA Technical Reports Server (NTRS)

Thornton, E. A.

1976-01-01

The program has a finite element library of six elements: two conduction/convection elements to model heat transfer in a solid, two convection elements to model heat transfer in a fluid, and two integrated conduction/convection elements to represent combined heat transfer in tubular and plate/fin fluid passages. Nonlinear thermal analysis due to temperature dependent thermal parameters is performed using the Newton-Raphson iteration method. Program output includes nodal temperatures and element heat fluxes. Pressure drops in fluid passages may be computed as an option. A companion plotting program for displaying the finite element model and predicted temperature distributions is presented. User instructions and sample problems are presented in appendixes.

Design optimization of space structures

NASA Technical Reports Server (NTRS)

Felippa, Carlos

1991-01-01

The topology-shape-size optimization of space structures is investigated through Kikuchi's homogenization method. The method starts from a 'design domain block,' which is a region of space into which the structure is to materialize. This domain is initially filled with a finite element mesh, typically regular. Force and displacement boundary conditions corresponding to applied loads and supports are applied at specific points in the domain. An optimal structure is to be 'carved out' of the design under two conditions: (1) a cost function is to be minimized, and (2) equality or inequality constraints are to be satisfied. The 'carving' process is accomplished by letting microstructure holes develop and grow in elements during the optimization process. These holes have a rectangular shape in two dimensions and a cubical shape in three dimensions, and may also rotate with respect to the reference axes. The properties of the perforated element are obtained through an homogenization procedure. Once a hole reaches the volume of the element, that element effectively disappears. The project has two phases. In the first phase the method was implemented as the combination of two computer programs: a finite element module, and an optimization driver. In the second part, focus is on the application of this technique to planetary structures. The finite element part of the method was programmed for the two-dimensional case using four-node quadrilateral elements to cover the design domain. An element homogenization technique different from that of Kikuchi and coworkers was implemented. The optimization driver is based on an augmented Lagrangian optimizer, with the volume constraint treated as a Courant penalty function. The optimizer has to be especially tuned to this type of optimization because the number of design variables can reach into the thousands. The driver is presently under development.

Scanning sequences after Gibbs sampling to find multiple occurrences of functional elements

PubMed Central

Tharakaraman, Kannan; Mariño-Ramírez, Leonardo; Sheetlin, Sergey L; Landsman, David; Spouge, John L

2006-01-01

Background Many DNA regulatory elements occur as multiple instances within a target promoter. Gibbs sampling programs for finding DNA regulatory elements de novo can be prohibitively slow in locating all instances of such an element in a sequence set. Results We describe an improvement to the A-GLAM computer program, which predicts regulatory elements within DNA sequences with Gibbs sampling. The improvement adds an optional "scanning step" after Gibbs sampling. Gibbs sampling produces a position specific scoring matrix (PSSM). The new scanning step resembles an iterative PSI-BLAST search based on the PSSM. First, it assigns an "individual score" to each subsequence of appropriate length within the input sequences using the initial PSSM. Second, it computes an E-value from each individual score, to assess the agreement between the corresponding subsequence and the PSSM. Third, it permits subsequences with E-values falling below a threshold to contribute to the underlying PSSM, which is then updated using the Bayesian calculus. A-GLAM iterates its scanning step to convergence, at which point no new subsequences contribute to the PSSM. After convergence, A-GLAM reports predicted regulatory elements within each sequence in order of increasing E-values, so users have a statistical evaluation of the predicted elements in a convenient presentation. Thus, although the Gibbs sampling step in A-GLAM finds at most one regulatory element per input sequence, the scanning step can now rapidly locate further instances of the element in each sequence. Conclusion Datasets from experiments determining the binding sites of transcription factors were used to evaluate the improvement to A-GLAM. Typically, the datasets included several sequences containing multiple instances of a regulatory motif. The improvements to A-GLAM permitted it to predict the multiple instances. PMID:16961919

40 CFR 233.10 - Elements of a program submission.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Elements of a program submission. 233.10 Section 233.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING 404 STATE PROGRAM REGULATIONS Program Approval § 233.10 Elements of a program submission. Any State...

40 CFR 233.10 - Elements of a program submission.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Elements of a program submission. 233.10 Section 233.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING 404 STATE PROGRAM REGULATIONS Program Approval § 233.10 Elements of a program submission. Any State...

40 CFR 233.10 - Elements of a program submission.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Elements of a program submission. 233.10 Section 233.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING 404 STATE PROGRAM REGULATIONS Program Approval § 233.10 Elements of a program submission. Any State...

40 CFR 233.10 - Elements of a program submission.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Elements of a program submission. 233.10 Section 233.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING 404 STATE PROGRAM REGULATIONS Program Approval § 233.10 Elements of a program submission. Any State...

40 CFR 233.10 - Elements of a program submission.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Elements of a program submission. 233.10 Section 233.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING 404 STATE PROGRAM REGULATIONS Program Approval § 233.10 Elements of a program submission. Any State...

A computer program for anisotropic shallow-shell finite elements using symbolic integration

NASA Technical Reports Server (NTRS)

Andersen, C. M.; Bowen, J. T.

1976-01-01

A FORTRAN computer program for anisotropic shallow-shell finite elements with variable curvature is described. A listing of the program is presented together with printed output for a sample case. Computation times and central memory requirements are given for several different elements. The program is based on a stiffness (displacement) finite-element model in which the fundamental unknowns consist of both the displacement and the rotation components of the reference surface of the shell. Two triangular and four quadrilateral elements are implemented in the program. The triangular elements have 6 or 10 nodes, and the quadrilateral elements have 4 or 8 nodes. Two of the quadrilateral elements have internal degrees of freedom associated with displacement modes which vanish along the edges of the elements (bubble modes). The triangular elements and the remaining two quadrilateral elements do not have bubble modes. The output from the program consists of arrays corresponding to the stiffness, the geometric stiffness, the consistent mass, and the consistent load matrices for individual elements. The integrals required for the generation of these arrays are evaluated by using symbolic (or analytic) integration in conjunction with certain group-theoretic techniques. The analytic expressions for the integrals are exact and were developed using the symbolic and algebraic manipulation language.

The Concert system - Compiler and runtime technology for efficient concurrent object-oriented programming

NASA Technical Reports Server (NTRS)

Chien, Andrew A.; Karamcheti, Vijay; Plevyak, John; Sahrawat, Deepak

1993-01-01

Concurrent object-oriented languages, particularly fine-grained approaches, reduce the difficulty of large scale concurrent programming by providing modularity through encapsulation while exposing large degrees of concurrency. Despite these programmability advantages, such languages have historically suffered from poor efficiency. This paper describes the Concert project whose goal is to develop portable, efficient implementations of fine-grained concurrent object-oriented languages. Our approach incorporates aggressive program analysis and program transformation with careful information management at every stage from the compiler to the runtime system. The paper discusses the basic elements of the Concert approach along with a description of the potential payoffs. Initial performance results and specific plans for system development are also detailed.

Elemental economy: microbial strategies for optimizing growth in the face of nutrient limitation.

PubMed

Merchant, Sabeeha S; Helmann, John D

2012-01-01

Microorganisms play a dominant role in the biogeochemical cycling of nutrients. They are rightly praised for their facility for fixing both carbon and nitrogen into organic matter, and microbial driven processes have tangibly altered the chemical composition of the biosphere and its surrounding atmosphere. Despite their prodigious capacity for molecular transformations, microorganisms are powerless in the face of the immutability of the elements. Limitations for specific elements, either fleeting or persisting over eons, have left an indelible trace on microbial genomes, physiology, and their very atomic composition. We here review the impact of elemental limitation on microbes, with a focus on selected genetic model systems and representative microbes from the ocean ecosystem. Evolutionary adaptations that enhance growth in the face of persistent or recurrent elemental limitations are evident from genome and proteome analyses. These range from the extreme (such as dispensing with a requirement for a hard to obtain element) to the extremely subtle (changes in protein amino acid sequences that slightly, but significantly, reduce cellular carbon, nitrogen, or sulfur demand). One near-universal adaptation is the development of sophisticated acclimation programs by which cells adjust their chemical composition in response to a changing environment. When specific elements become limiting, acclimation typically begins with an increased commitment to acquisition and a concomitant mobilization of stored resources. If elemental limitation persists, the cell implements austerity measures including elemental sparing and elemental recycling. Insights into these fundamental cellular properties have emerged from studies at many different levels, including ecology, biological oceanography, biogeochemistry, molecular genetics, genomics, and microbial physiology. Here, we present a synthesis of these diverse studies and attempt to discern some overarching themes. Copyright © 2012 Elsevier Ltd. All rights reserved.

Elemental Economy: microbial strategies for optimizing growth in the face of nutrient limitation

PubMed Central

Merchant, Sabeeha S.; Helmann, John D.

2014-01-01

Microorganisms play a dominant role in the biogeochemical cycling of nutrients. They are rightly praised for their facility at fixing both carbon and nitrogen into organic matter, and microbial driven processes have tangibly altered the chemical composition of the biosphere and its surrounding atmosphere. Despite their prodigious capacity for molecular transformations, microorganisms are powerless in the face of the immutability of the elements. Limitations for specific elements, either fleeting or persisting over eons, have left an indelible trace on microbial genomes, physiology, and their very atomic composition. We here review the impact of elemental limitation on microbes, with a focus on selected genetic model systems and representative microbes from the ocean ecosystem. Evolutionary adaptations that enhance growth in the face of persistent or recurrent elemental limitations are evident from genome and proteome analyses. These range from the extreme (such as dispensing with a requirement for a hard to obtain element) to the extremely subtle (changes in protein amino acid sequences that slightly, but significantly, reduce cellular carbon, nitrogen, or sulfur demand). One near universal adaptation is the development of sophisticated acclimation programs by which cells adjust their chemical composition in response to a changing environment. When specific elements become limiting, acclimation typically begins with an increased commitment to acquisition and a concomitant mobilization of stored resources. If elemental limitation persists, the cell implements austerity measures including elemental-sparing and elemental-recycling. Insights into these fundamental cellular properties have emerged from studies at many different levels; including ecology, biological oceanography, biogeochemistry, molecular genetics, genomics, and microbial physiology. Here, we present a synthesis of these diverse studies and attempt to discern some overarching themes. PMID:22633059

Sound for Film: Audio Education for Filmmakers.

ERIC Educational Resources Information Center

Lazar, Wanda

1998-01-01

Identifies the specific, unique, and important elements of audio education required by film professionals. Presents a model unit to be included in a film studies program, either as a separate course or as part of a film production or introduction to film course. Offers a model syllabus for such a course or unit on sound in film. (SR)

Manpower Requirements Report for FY 1982

DTIC Science & Technology

1981-02-01

Specifically included are program elements for industrial preparedness, second destination transportation, property disposal, production engineering ...artillery, and combat - engineers . Army policy accepts the fact that women will serve in loca- .. tions throughout the battlefield, will be expected to... industrial engineering work measurement techniques and computerized models such as the Logistics Composite Model (LCOM). MEP policy emanates from the

Longitudinal Study of Middle Grades Chemistry Professional Development: Enhancement of Personal Science Teaching Self-Efficacy and Outcome Expectancy

ERIC Educational Resources Information Center

Khourey-Bowers, Claudia; Simonis, Doris G.

2004-01-01

The purpose of this research was to enhance self-efficacy beliefs, chemistry content, and pedagogical content knowledge of middle grades teachers by incorporating specific design elements into professional development. This study analyzed the influence of program design on achieving gains in personal science teaching self-efficacy, outcome…

India: A Myriad of Cultures. Three Learning Modules for Middle School Students.

ERIC Educational Resources Information Center

Jassim, Charlene

Three learning modules designed for middle school students by a middle school teacher are presented in this document. The three modules are designed to supplement the regular textbook program for teaching about India. They are specifically created to fulfill the needs and interests of 11- to 14-year-old students. The modules contain elements of…

Six-Year Ukrainian as a Second Language Program, Grade 11 Teaching Unit.

ERIC Educational Resources Information Center

Boruszczak, Bohdan

The teaching unit provides materials for the fifth year of the six-year secondary school curriculum in Ukrainian as a second language. It focuses on basic vocabulary and communications skills related to the theme of "the restaurant" including: the development of listening, speaking, reading, and writing skills; specific elements of grammar (verb…

Ways to Promote the Positive Development of Children and Youth. Research-to-Results Brief. Publication #2008-11

ERIC Educational Resources Information Center

Zarrett, Nicole; Lerner, Richard M.

2008-01-01

This brief discusses the elements and features that define positive youth development and highlights some ways to support the positive development of children and youth. Specifically, this brief addresses the critical role that particular out-of-school time settings (regular family dinners and organized activity programs) can play in supporting…

The Way of the Web: Answers to Your Questions about Web Site Marketing.

ERIC Educational Resources Information Center

Wassom, Julie

2002-01-01

Provides suggestions for effective web site marketing for child care and early education programs. Includes key considerations in designing a web site, specific elements that cause visitors to stay on and return to the site, use of interactive sites, web-site updating and revision, and use of traditional marketing activities to direct prospective…

The Neuroscience of Art: A Research Program for the Next Decade?

ERIC Educational Resources Information Center

Changeux, Jean Pierre

2011-01-01

Works of art can be viewed as elements of a human-specific nonverbal communication system, distinct from language. First, the cognitive abilities and skills required for art creation and perception are built from a cascade of events driven by a "genetic envelope". Essential for the understanding of artistic creation is its epigenetic variability.…

When Money Really Matters: Tying Resources of Specific Programmatic and Instructional Elements to Student Academic Growth

ERIC Educational Resources Information Center

Goetz, Michael Eric

2012-01-01

This study explores the cost-effectiveness ratios associated with individual tutoring, intensive reading/language arts instruction, and a focus on core subject areas. Using the Early Childhood Longitudinal Study (ECLS-K) database, this study analyzes these programs using a three-level hierarchical linear model (HLM) with a nationally…

41 CFR 60-2.17 - Additional required elements of affirmative action programs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... elements of affirmative action programs. 60-2.17 Section 60-2.17 Public Contracts and Property Management... EMPLOYMENT OPPORTUNITY, DEPARTMENT OF LABOR 2-AFFIRMATIVE ACTION PROGRAMS Purpose and Contents of Affirmative Action Programs § 60-2.17 Additional required elements of affirmative action programs. In addition to the...

Transition and closeout of the Fernald Closure Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bilson, H.E.; Terry, T.; Reising, J.

The U.S. Department of Energy (DOE) and Fluor Fernald have completed the majority of the cleanup of the Fernald Site. The over 1,000 acre complex for processing uranium has been demolished and soil contamination has been remediated. With acres of wetlands and prairies replacing the buildings and waste pits. At the end of the project the focus shifted to developing demonstrating the completion of the project and the contract, as well as ensuring a smooth transition of the facility from the DOE's Environmental Management (EM) Program to the DOE's Legacy Management (LM) Program. Working with the DOE, each portion ofmore » the closure contract was examined for specific closure definition. From this negotiation effort the Comprehensive Exit and Transition Plan (CE/T Plan) was written. The CE/T Plan is intended to assist DOE in the analysis that the site is ready for transfer into long-term stewardship (LTS) (also referred to as legacy management) and that Fluor Fernald, Inc. has satisfactorily completed the closure contract statement of work elements. Following the Lessons Learned from the closure of the Rocky Flats Site, the DOE's Legacy Management Program created a matrix of Transition Elements required to ensure adequate information was in place to allow the new prime contractor to perform the Legacy Management scope of work. The transition plan included over 1,000 elements broken down into functional areas and relied on specific Fernald Responsibility Transition Packages (RTPs) for detailed transition actions. The template for Closure and Transition Planning used at the Fernald Site was developed using the best Lessons Learned from across the DOE Complex. The template could be used for other sites, and lessons learned from this closure and transition will be appropriate for all closure projects. (authors)« less

2013 Space Radiation Standing Review Panel Status Review for: The Risk of Acute and Late Central Nervous System Effects from Radiation Exposure, The Risk of Acute Radiation Syndromes Due to Solar Particle Events (SPEs), The Risk Of Degenerative Tissue Or Other Health Effects From Radiation Exposure, and The Risk of Radiation Carcinogenesis

NASA Technical Reports Server (NTRS)

2014-01-01

The Space Radiation Standing Review Panel (from here on referred to as the SRP) was impressed with the strong research program presented by the scientists and staff associated with NASA's Space Radiation Program Element and National Space Biomedical Research Institute (NSBRI). The presentations given on-site and the reports of ongoing research that were provided in advance indicated the potential Risk of Acute and Late Central Nervous System Effects from Radiation Exposure (CNS) and were extensively discussed by the SRP. This new data leads the SRP to recommend that a higher priority should be placed on research designed to identify and understand these risks at the mechanistic level. To support this effort the SRP feels that a shift of emphasis from Acute Radiation Syndromes (ARS) and carcinogenesis to CNS-related endpoints is justified at this point. However, these research efforts need to focus on mechanisms, should follow pace with advances in the field of CNS in general and should consider the specific comments and suggestions made by the SRP as outlined below. The SRP further recommends that the Space Radiation Program Element continue with its efforts to fill the vacant positions (Element Scientist, CNS Risk Discipline Lead) as soon as possible. The SRP also strongly recommends that NASA should continue the NASA Space Radiation Summer School. In addition to these broad recommendations, there are specific comments/recommendations noted for each risk, described in detail below.

Listening to youth: reflections on the effect of a youth development program.

PubMed

Kalish, Robin E; Voigt, Bridget; Rahimian, Afsaneh; Dicara, Joseph; Sheehan, Karen

2010-05-01

To identify key elements that contribute to the effectiveness of a youth development program, interviews were conducted with 35 former Chicago Youth Programs (CYP) participants who remained in the program until age 18 years and went on to attend college, and 25 participants who left the program (and are currently older than age 18). Of the college participants who remained in CYP until age 18, 97% reported that the program had helped them by providing tutoring, mentoring, and financial support. In comparison, only 56% of the CYP dropouts had completed some college, and nearly 50% reported being involved in illegal activities. Many of the CYP dropouts were drawn to illegal activities for financial reasons or because they felt there was inadequate adolescent programming. All reported benefiting from their CYP participation. Incorporating financial incentives or specific adolescent programming may lead to longer youth program participation and, perhaps, more positive outcomes.

Lapin Data Interchange Among Database, Analysis and Display Programs Using XML-Based Text Files

NASA Technical Reports Server (NTRS)

2005-01-01

The purpose of grant NCC3-966 was to investigate and evaluate the interchange of application-specific data among multiple programs each carrying out part of the analysis and design task. This has been carried out previously by creating a custom program to read data produced by one application and then write that data to a file whose format is specific to the second application that needs all or part of that data. In this investigation, data of interest is described using the XML markup language that allows the data to be stored in a text-string. Software to transform output data of a task into an XML-string and software to read an XML string and extract all or a portion of the data needed for another application is used to link two independent applications together as part of an overall design effort. This approach was initially used with a standard analysis program, Lapin, along with standard applications a standard spreadsheet program, a relational database program, and a conventional dialog and display program to demonstrate the successful sharing of data among independent programs. Most of the effort beyond that demonstration has been concentrated on the inclusion of more complex display programs. Specifically, a custom-written windowing program organized around dialogs to control the interactions have been combined with an independent CAD program (Open Cascade) that supports sophisticated display of CAD elements such as lines, spline curves, and surfaces and turbine-blade data produced by an independent blade design program (UD0300).

Recent Langley helicopter acoustics contributions

NASA Technical Reports Server (NTRS)

Morgan, Homer G.; Pao, S. P.; Powell, C. A.

1988-01-01

The helicopter acoustics program at NASA Langley has included technology for elements of noise control ranging from sources of noise to receivers of noise. The scope of Langley contributions for about the last decade is discussed. Specifically, the resolution of two certification noise quantification issues by subjective acoustics research, the development status of the helicopter system noise prediction program ROTONET are reviewed and the highlights from research on blade rotational, broadband, and blade vortex interaction noise sources are presented. Finally, research contributions on helicopter cabin (or interior) noise control are presented. A bibliography of publications from the Langley helicopter acoustics program for the past 10 years is included.

A description of the new 3D electron gun and collector modeling tool: MICHELLE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petillo, J.; Mondelli, A.; Krueger, W.

1999-07-01

A new 3D finite element gun and collector modeling code is under development at SAIC in collaboration with industrial partners and national laboratories. This development program has been designed specifically to address the shortcomings of current simulation and modeling tools. In particular, although there are 3D gun codes that exist today, their ability to address fine scale features is somewhat limited in 3D due to disparate length scales of certain classes of devices. Additionally, features like advanced emission rules, including thermionic Child's law and comprehensive secondary emission models also need attention. The program specifically targets problems classes including gridded-guns, sheet-beammore » guns, multi-beam devices, and anisotropic collectors. The presentation will provide an overview of the program objectives, the approach to be taken by the development team, and a status of the project.« less

76 FR 5187 - Notice of Proposed Information Collection: Comment Request; Emergency Homeowners' Loan Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-28

... Information Collection: Comment Request; Emergency Homeowners' Loan Program Data Elements AGENCY: Office of... following information: Title of Proposal: Emergency Homeowners' Loan Program Data Elements. Description of... of Affected Public: Emergency Homeowners' Loan Program Data Elements. Estimation of the total numbers...

The American College of Surgeons Children's Surgery Verification and Quality Improvement Program: implications for anesthesiologists.

PubMed

Houck, Constance S; Deshpande, Jayant K; Flick, Randall P

2017-06-01

The Task Force for Children's Surgical Care, an ad-hoc multidisciplinary group of invited leaders in pediatric perioperative medicine, was assembled in May 2012 to consider approaches to optimize delivery of children's surgical care in today's competitive national healthcare environment. Over the subsequent 3 years, with support from the American College of Surgeons (ACS) and Children's Hospital Association (CHA), the group established principles regarding perioperative resource standards, quality improvement and safety processes, data collection, and verification that were used to develop an ACS-sponsored Children's Surgery Verification and Quality Improvement Program (ACS CSV). The voluntary ACS CSV was officially launched in January 2017 and more than 125 pediatric surgical programs have expressed interest in verification. ACS CSV-verified programs have specific requirements for pediatric anesthesia leadership, resources, and the availability of pediatric anesthesiologists or anesthesiologists with pediatric expertise to care for infants and young children. The present review outlines the history of the ACS CSV, key elements of the program, and the standards specific to pediatric anesthesiology. As with the pediatric trauma programs initiated more than 40 years ago, this program has the potential to significantly improve surgical care for infants and children in the United States and Canada.

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 5: Catalog of IPAD technical program elements

NASA Technical Reports Server (NTRS)

Gillette, W. B. (Editor); Southall, J. W. (Editor)

1973-01-01

The catalog is presented of technical program elements which are required to support the design activities for a subsonic and supersonic commercial transport. Information for each element consists of usage and storage information, ownership, status and an abstract describing the purpose of the element.

DetOx: a program for determining anomalous scattering factors of mixed-oxidation-state species.

PubMed

Sutton, Karim J; Barnett, Sarah A; Christensen, Kirsten E; Nowell, Harriott; Thompson, Amber L; Allan, David R; Cooper, Richard I

2013-01-01

Overlapping absorption edges will occur when an element is present in multiple oxidation states within a material. DetOx is a program for partitioning overlapping X-ray absorption spectra into contributions from individual atomic species and computing the dependence of the anomalous scattering factors on X-ray energy. It is demonstrated how these results can be used in combination with X-ray diffraction data to determine the oxidation state of ions at specific sites in a mixed-valance material, GaCl(2).

A Review of Australian Investigations on Aeronautical Fatigue during the Period April 1979 to March 1981.

DTIC Science & Technology

1981-03-01

RD73 9. COST CODE: b. Sponsoring Agency: 27003 SUPPLY 50/2 10. IMPRINT: 11. COMPUTER PROGRAM(S) Aeronautical Research (Title(s) and language(s...laminates. 9/24 An advanced iso -parametric element is also being Jeveloped specifically for the analysis of disbonds and internal flaws in composite...FAILURE - STATION 119 iso I f FIG. 9.3 NOMAD STRLFCI URAl I AlT 10(L TESI FIG. 9.4 FAILED NOMAD STRUT UPPER END FITTING FIG. 9.5 FRACTURE FACES OF FAILED

Innovation in collaborative health research training: the role of active learning.

PubMed

Poole, Gary; Egan, John P; Iqbal, Isabeau

2009-03-01

This paper describes and discusses the essential pedagogical elements of the Partnering in Community Health Research (PCHR) program, which was designed to address the training needs of researchers who participate in collaborative, interdisciplinary health research. These elements were intended to foster specific skills that helped learners develop research partnerships featuring knowledge, capabilities, values and attitudes needed for successful research projects. By establishing research teams called "clusters", PCHR provided research training and experience for graduate students and post-doctoral fellows, as well as for community health workers and professionals. Pedagogical elements relied on active learning approaches such as inquiry-based and experience-based learning. Links between these elements and learning approaches are explained. Through their work in cluster-based applied research projects, the development of learning plans, and cross-cluster learning events, trainees acquired collaborative research competencies that were valuable, relevant and theoretically informed.

Catalysis and biocatalysis program

NASA Technical Reports Server (NTRS)

1991-01-01

The annual report presents the fiscal year (FY) 1990 research activities and accomplishments for the Catalysis and Biocatalysis Program of the Advanced Industrial Concepts Division (AICD), Office of Industrial Technologies of the Department of Energy (DOE). The mission of the AICD is to create a balanced program of high risk, long term, directed interdisciplinary research and development that will improve energy efficiency and enhance fuel flexibility in the industrial sector. The Catalysis and Biocatalysis Program's technical activities were organized into five work elements: the Molecular Modeling and Catalysis by Design element; the Applied Microbiology and Genetics element; the Bioprocess Engineering element; the Separations and Novel Chemical Processes element; and the Process Design and Analysis element.

40 CFR 271.5 - Elements of a program submission.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 28 2013-07-01 2013-07-01 false Elements of a program submission. 271.5 Section 271.5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES... Authorization § 271.5 Elements of a program submission. (a) Any State that seeks to administer a program under...

40 CFR 501.11 - Elements of a sludge management program submission.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Elements of a sludge management program submission. 501.11 Section 501.11 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Programs § 501.11 Elements of a sludge management program submission. (a) Any State that seeks to...

40 CFR 501.11 - Elements of a sludge management program submission.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Elements of a sludge management program submission. 501.11 Section 501.11 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Programs § 501.11 Elements of a sludge management program submission. (a) Any State that seeks to...

7 CFR 18.4 - Elements of program.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 1 2011-01-01 2011-01-01 false Elements of program. 18.4 Section 18.4 Agriculture Office of the Secretary of Agriculture EQUAL EMPLOYMENT OPPORTUNITY IN THE STATE COOPERATIVE EXTENSION SERVICES § 18.4 Elements of program. A satisfactory program shall include: (a) A statement of policy...

7 CFR 18.4 - Elements of program.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 1 2013-01-01 2013-01-01 false Elements of program. 18.4 Section 18.4 Agriculture Office of the Secretary of Agriculture EQUAL EMPLOYMENT OPPORTUNITY IN THE STATE COOPERATIVE EXTENSION SERVICES § 18.4 Elements of program. A satisfactory program shall include: (a) A statement of policy...

40 CFR 271.5 - Elements of a program submission.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 27 2011-07-01 2011-07-01 false Elements of a program submission. 271.5 Section 271.5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES... Authorization § 271.5 Elements of a program submission. (a) Any State that seeks to administer a program under...

40 CFR 271.5 - Elements of a program submission.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 28 2012-07-01 2012-07-01 false Elements of a program submission. 271.5 Section 271.5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES... Authorization § 271.5 Elements of a program submission. (a) Any State that seeks to administer a program under...

40 CFR 271.5 - Elements of a program submission.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Elements of a program submission. 271.5 Section 271.5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES... Authorization § 271.5 Elements of a program submission. (a) Any State that seeks to administer a program under...

7 CFR 18.4 - Elements of program.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 1 2012-01-01 2012-01-01 false Elements of program. 18.4 Section 18.4 Agriculture Office of the Secretary of Agriculture EQUAL EMPLOYMENT OPPORTUNITY IN THE STATE COOPERATIVE EXTENSION SERVICES § 18.4 Elements of program. A satisfactory program shall include: (a) A statement of policy...

7 CFR 18.4 - Elements of program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 1 2010-01-01 2010-01-01 false Elements of program. 18.4 Section 18.4 Agriculture Office of the Secretary of Agriculture EQUAL EMPLOYMENT OPPORTUNITY IN THE STATE COOPERATIVE EXTENSION SERVICES § 18.4 Elements of program. A satisfactory program shall include: (a) A statement of policy...

40 CFR 271.5 - Elements of a program submission.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 27 2014-07-01 2014-07-01 false Elements of a program submission. 271.5 Section 271.5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES... Authorization § 271.5 Elements of a program submission. (a) Any State that seeks to administer a program under...

40 CFR 501.11 - Elements of a sludge management program submission.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Elements of a sludge management program submission. 501.11 Section 501.11 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Programs § 501.11 Elements of a sludge management program submission. (a) Any State that seeks to...

7 CFR 18.4 - Elements of program.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 1 2014-01-01 2014-01-01 false Elements of program. 18.4 Section 18.4 Agriculture Office of the Secretary of Agriculture EQUAL EMPLOYMENT OPPORTUNITY IN THE STATE COOPERATIVE EXTENSION SERVICES § 18.4 Elements of program. A satisfactory program shall include: (a) A statement of policy...

40 CFR 501.11 - Elements of a sludge management program submission.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Elements of a sludge management program submission. 501.11 Section 501.11 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Programs § 501.11 Elements of a sludge management program submission. (a) Any State that seeks to...

Crime scene investigations using portable, non-destructive space exploration technology

NASA Technical Reports Server (NTRS)

Trombka, Jacob I.; Schweitzer, Jeffrey; Selavka, Carl; Dale, Mark; Gahn, Norman; Floyd, Samuel; Marie, James; Hobson, Maritza; Zeosky, Jerry; Martin, Ken;

Use of Balanced Scorecard Methodology for Performance Measurement of the Health Extension Program in Ethiopia

PubMed Central

Teklehaimanot, Hailay D.; Teklehaimanot, Awash; Tedella, Aregawi A.; Abdella, Mustofa

2016-01-01

In 2004, Ethiopia introduced a community-based Health Extension Program to deliver basic and essential health services. We developed a comprehensive performance scoring methodology to assess the performance of the program. A balanced scorecard with six domains and 32 indicators was developed. Data collected from 1,014 service providers, 433 health facilities, and 10,068 community members sampled from 298 villages were used to generate weighted national, regional, and agroecological zone scores for each indicator. The national median indicator scores ranged from 37% to 98% with poor performance in commodity availability, workforce motivation, referral linkage, infection prevention, and quality of care. Indicator scores showed significant difference by region (P < 0.001). Regional performance varied across indicators suggesting that each region had specific areas of strength and deficiency, with Tigray and the Southern Nations, Nationalities and Peoples Region being the best performers while the mainly pastoral regions of Gambela, Afar, and Benishangul-Gumuz were the worst. The findings of this study suggest the need for strategies aimed at improving specific elements of the program and its performance in specific regions to achieve quality and equitable health services. PMID:26928842

Use of Balanced Scorecard Methodology for Performance Measurement of the Health Extension Program in Ethiopia.

PubMed

Teklehaimanot, Hailay D; Teklehaimanot, Awash; Tedella, Aregawi A; Abdella, Mustofa

2016-05-04

In 2004, Ethiopia introduced a community-based Health Extension Program to deliver basic and essential health services. We developed a comprehensive performance scoring methodology to assess the performance of the program. A balanced scorecard with six domains and 32 indicators was developed. Data collected from 1,014 service providers, 433 health facilities, and 10,068 community members sampled from 298 villages were used to generate weighted national, regional, and agroecological zone scores for each indicator. The national median indicator scores ranged from 37% to 98% with poor performance in commodity availability, workforce motivation, referral linkage, infection prevention, and quality of care. Indicator scores showed significant difference by region (P < 0.001). Regional performance varied across indicators suggesting that each region had specific areas of strength and deficiency, with Tigray and the Southern Nations, Nationalities and Peoples Region being the best performers while the mainly pastoral regions of Gambela, Afar, and Benishangul-Gumuz were the worst. The findings of this study suggest the need for strategies aimed at improving specific elements of the program and its performance in specific regions to achieve quality and equitable health services. © The American Society of Tropical Medicine and Hygiene.

A modular finite-element model (MODFE) for areal and axisymmetric ground-water-flow problems, Part 3: Design philosophy and programming details

USGS Publications Warehouse

Torak, L.J.

1993-01-01

A MODular Finite-Element, digital-computer program (MODFE) was developed to simulate steady or unsteady-state, two-dimensional or axisymmetric ground-water-flow. The modular structure of MODFE places the computationally independent tasks that are performed routinely by digital-computer programs simulating ground-water flow into separate subroutines, which are executed from the main program by control statements. Each subroutine consists of complete sets of computations, or modules, which are identified by comment statements, and can be modified by the user without affecting unrelated computations elsewhere in the program. Simulation capabilities can be added or modified by either adding or modifying subroutines that perform specific computational tasks, and the modular-program structure allows the user to create versions of MODFE that contain only the simulation capabilities that pertain to the ground-water problem of interest. MODFE is written in a Fortran programming language that makes it virtually device independent and compatible with desk-top personal computers and large mainframes. MODFE uses computer storage and execution time efficiently by taking advantage of symmetry and sparseness within the coefficient matrices of the finite-element equations. Parts of the matrix coefficients are computed and stored as single-subscripted variables, which are assembled into a complete coefficient just prior to solution. Computer storage is reused during simulation to decrease storage requirements. Descriptions of subroutines that execute the computational steps of the modular-program structure are given in tables that cross reference the subroutines with particular versions of MODFE. Programming details of linear and nonlinear hydrologic terms are provided. Structure diagrams for the main programs show the order in which subroutines are executed for each version and illustrate some of the linear and nonlinear versions of MODFE that are possible. Computational aspects of changing stresses and boundary conditions with time and of mass-balance and error terms are given for each hydrologic feature. Program variables are listed and defined according to their occurrence in the main programs and in subroutines. Listings of the main programs and subroutines are given.

The NASA/Industry Design Analysis Methods for Vibrations (DAMVIBS) Program - A government overview. [of rotorcraft technology development using finite element method

NASA Technical Reports Server (NTRS)

Kvaternik, Raymond G.

1992-01-01

An overview is presented of government contributions to the program called Design Analysis Methods for Vibrations (DAMV) which attempted to develop finite-element-based analyses of rotorcraft vibrations. NASA initiated the program with a finite-element modeling program for the CH-47D tandem-rotor helicopter. The DAMV program emphasized four areas including: airframe finite-element modeling, difficult components studies, coupled rotor-airframe vibrations, and airframe structural optimization. Key accomplishments of the program include industrywide standards for modeling metal and composite airframes, improved industrial designs for vibrations, and the identification of critical structural contributors to airframe vibratory responses. The program also demonstrated the value of incorporating secondary modeling details to improving correlation, and the findings provide the basis for an improved finite-element-based dynamics design-analysis capability.

Advanced Lung Cancer Screening: An Individualized Molecular Nanotechnology Approach

DTIC Science & Technology

2016-03-01

Award Number: W81XWH-12-1-0323 TITLE: Advanced Lung Cancer Screening: An Individualized Molecular Nanotechnology Approach PRINCIPAL...SUBTITLE Advanced Lung Cancer Screening: An Individualized Molecular Nanotechnology Approach 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT...increasing its sensitivity and specificity through nanotechnology . Hypothesis: Detection of DNA methylation from individuals with cancer can be used to

ELECTIONS: Perspectives on Activities and Challenges Across the Nation

DTIC Science & Technology

2001-10-01

GAO United States General Accounting OfficeReport to Congressional RequestersOctober 2001 ELECTIONS Perspectives on Activities and Challenges ...Perspectives on Activities and Challenges Across the Nation Contract Number Grant Number Program Element Number Author(s) Project Number Task...administration of elections and the election process as of November 2000. Specifically, this report describes in detail the operations and challenges associated

An Overview of the NASA Aviation Safety Program Propulsion Health Monitoring Element

NASA Technical Reports Server (NTRS)

Simon, Donald L.

2000-01-01

The NASA Aviation Safety Program (AvSP) has been initiated with aggressive goals to reduce the civil aviation accident rate, To meet these goals, several technology investment areas have been identified including a sub-element in propulsion health monitoring (PHM). Specific AvSP PHM objectives are to develop and validate propulsion system health monitoring technologies designed to prevent engine malfunctions from occurring in flight, and to mitigate detrimental effects in the event an in-flight malfunction does occur. A review of available propulsion system safety information was conducted to help prioritize PHM areas to focus on under the AvSP. It is noted that when a propulsion malfunction is involved in an aviation accident or incident, it is often a contributing factor rather than the sole cause for the event. Challenging aspects of the development and implementation of PHM technology such as cost, weight, robustness, and reliability are discussed. Specific technology plans are overviewed including vibration diagnostics, model-based controls and diagnostics, advanced instrumentation, and general aviation propulsion system health monitoring technology. Propulsion system health monitoring, in addition to engine design, inspection, maintenance, and pilot training and awareness, is intrinsic to enhancing aviation propulsion system safety.

Single- and dual-carrier microwave noise abatement in the deep space network. [microwave antennas

NASA Technical Reports Server (NTRS)

Bathker, D. A.; Brown, D. W.; Petty, S. M.

1975-01-01

The NASA/JPL Deep Space Network (DSN) microwave ground antenna systems are presented which simultaneously uplink very high power S-band signals while receiving very low level S- and X-band downlinks. Tertiary mechanisms associated with elements give rise to self-interference in the forms of broadband noise burst and coherent intermodulation products. A long-term program to reduce or eliminate both forms of interference is described in detail. Two DSN antennas were subjected to extensive interference testing and practical cleanup program; the initial performance, modification details, and final performance achieved at several planned stages are discussed. Test equipment and field procedures found useful in locating interference sources are discussed. Practices deemed necessary for interference-free operations in the DSN are described. Much of the specific information given is expected to be easily generalized for application in a variety of similar installations. Recommendations for future investigations and individual element design are given.

Comparison of NASTRAN analysis with ground vibration results of UH-60A NASA/AEFA test configuration

NASA Technical Reports Server (NTRS)

Idosor, Florentino; Seible, Frieder

1990-01-01

Preceding program flight tests, a ground vibration test and modal test analysis of a UH-60A Black Hawk helicopter was conducted by Sikorsky Aircraft to complement the UH-60A test plan and NASA/ARMY Modern Technology Rotor Airloads Program. The 'NASA/AEFA' shake test configuration was tested for modal frequencies and shapes and compared with its NASTRAN finite element model counterpart to give correlative results. Based upon previous findings, significant differences in modal data existed and were attributed to assumptions regarding the influence of secondary structure contributions in the preliminary NASTRAN modeling. An analysis of an updated finite element model including several secondary structural additions has confirmed that the inclusion of specific secondary components produces a significant effect on modal frequency and free-response shapes and improves correlations at lower frequencies with shake test data.

What Is Best for Esther? Building Improvement Coaching Capacity With and for Users in Health and Social Care--A Case Study.

PubMed

Vackerberg, Nicoline; Levander, Märta Sund; Thor, Johan

2016-01-01

While coaching and customer involvement can enhance the improvement of health and social care, many organizations struggle to develop their improvement capability; it is unclear how best to accomplish this. We examined one attempt at training improvement coaches. The program, set in the Esther Network for integrated care in rural Jönköping County, Sweden, included eight 1-day sessions spanning 7 months in 2011. A senior citizen joined the faculty in all training sessions. Aiming to discern which elements in the program were essential for assuming the role of improvement coach, we used a case-study design with a qualitative approach. Our focus group interviews included 17 informants: 11 coaches, 3 faculty members, and 3 senior citizens. We performed manifest content analysis of the interview data. Creating will, ideas, execution, and sustainability emerged as crucial elements. These elements were promoted by customer focus--embodied by the senior citizen trainer--shared values and a solution-focused approach, by the supportive coach network and by participants' expanded systems understanding. These elements emerged as more important than specific improvement tools and are worth considering also elsewhere when seeking to develop improvement capability in health and social care organizations.

What Is Best for Esther? Building Improvement Coaching Capacity With and for Users in Health and Social Care—A Case Study

PubMed Central

Levander, Märta Sund; Thor, Johan

2016-01-01

While coaching and customer involvement can enhance the improvement of health and social care, many organizations struggle to develop their improvement capability; it is unclear how best to accomplish this. We examined one attempt at training improvement coaches. The program, set in the Esther Network for integrated care in rural Jönköping County, Sweden, included eight 1-day sessions spanning 7 months in 2011. A senior citizen joined the faculty in all training sessions. Aiming to discern which elements in the program were essential for assuming the role of improvement coach, we used a case-study design with a qualitative approach. Our focus group interviews included 17 informants: 11 coaches, 3 faculty members, and 3 senior citizens. We performed manifest content analysis of the interview data. Creating will, ideas, execution, and sustainability emerged as crucial elements. These elements were promoted by customer focus—embodied by the senior citizen trainer—shared values and a solution-focused approach, by the supportive coach network and by participants' expanded systems understanding. These elements emerged as more important than specific improvement tools and are worth considering also elsewhere when seeking to develop improvement capability in health and social care organizations. PMID:26783868

Guidelines for collecting and processing samples of stream bed sediment for analysis of trace elements and organic contaminants for the National Water-Quality Assessment Program

USGS Publications Warehouse

Shelton, Larry R.; Capel, Paul D.

1994-01-01

A major component of the U.S. Geological Survey's National Water-Quality Assessment program is to assess the occurrence and distribution of trace elements and organic contaminants in streams. The first phase of the strategy for the assessment is to analyze samples of bed sediments from depositional zones. Fine-grained particles deposited in these zones are natural accumulators of trace elements and hydrophobic organic compounds. For the information to be comparable among studies in many different parts of the Nation, strategies for selecting stream sites and depositional zones are critical. Fine-grained surficial sediments are obtained from several depositional zones within a stream reach and composited to yield a sample representing average conditions. Sample collection and processing must be done consistently and by procedures specifically designed to separate the fine material into fractions that yield uncontaminated samples for trace-level analytes in the laboratory. Special coring samplers and other instruments made of Teflon are used for collection. Samples are processed through a 2.0-millimeter stainless-steel mesh sieve for organic contaminate analysis and a 63-micrometer nylon-cloth sieve for trace-element analysis. Quality assurance is maintained by strict collection and processing procedures, duplicate samplings, and a rigid cleaning procedure.

TAP 2: A finite element program for thermal analysis of convectively cooled structures

NASA Technical Reports Server (NTRS)

Thornton, E. A.

1980-01-01

A finite element computer program (TAP 2) for steady-state and transient thermal analyses of convectively cooled structures is presented. The program has a finite element library of six elements: two conduction/convection elements to model heat transfer in a solid, two convection elements to model heat transfer in a fluid, and two integrated conduction/convection elements to represent combined heat transfer in tubular and plate/fin fluid passages. Nonlinear thermal analysis due to temperature-dependent thermal parameters is performed using the Newton-Raphson iteration method. Transient analyses are performed using an implicit Crank-Nicolson time integration scheme with consistent or lumped capacitance matrices as an option. Program output includes nodal temperatures and element heat fluxes. Pressure drops in fluid passages may be computed as an option. User instructions and sample problems are presented in appendixes.

34 CFR 200.26 - Core elements of a schoolwide program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Core elements of a schoolwide program. 200.26 Section 200.26 Education Regulations of the Offices of the Department of Education OFFICE OF ELEMENTARY AND... Improving Basic Programs Operated by Local Educational Agencies Schoolwide Programs § 200.26 Core elements...

10 CFR Appendix D to Part 436 - Energy Program Conservation Elements

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Energy Program Conservation Elements D Appendix D to Part 436 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Pt. 436, App. D Appendix D to Part 436—Energy Program Conservation Elements (a) In all successful energy...

10 CFR Appendix D to Part 436 - Energy Program Conservation Elements

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Energy Program Conservation Elements D Appendix D to Part 436 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Pt. 436, App. D Appendix D to Part 436—Energy Program Conservation Elements (a) In all successful energy...

10 CFR Appendix D to Part 436 - Energy Program Conservation Elements

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Energy Program Conservation Elements D Appendix D to Part 436 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Pt. 436, App. D Appendix D to Part 436—Energy Program Conservation Elements (a) In all successful energy...

10 CFR 420.17 - Optional elements of State Energy Program plans.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Optional elements of State Energy Program plans. 420.17 Section 420.17 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION STATE ENERGY PROGRAM Formula Grant Procedures § 420.17 Optional elements of State Energy Program plans. (a) Other appropriate activities or...

10 CFR 420.17 - Optional elements of State Energy Program plans.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Optional elements of State Energy Program plans. 420.17 Section 420.17 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION STATE ENERGY PROGRAM Formula Grant Procedures § 420.17 Optional elements of State Energy Program plans. (a) Other appropriate activities or...

10 CFR 420.17 - Optional elements of State Energy Program plans.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Optional elements of State Energy Program plans. 420.17 Section 420.17 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION STATE ENERGY PROGRAM Formula Grant Procedures § 420.17 Optional elements of State Energy Program plans. (a) Other appropriate activities or...

10 CFR Appendix D to Part 436 - Energy Program Conservation Elements

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Energy Program Conservation Elements D Appendix D to Part 436 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Pt. 436, App. D Appendix D to Part 436—Energy Program Conservation Elements (a) In all successful energy...

10 CFR 420.17 - Optional elements of State Energy Program plans.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Optional elements of State Energy Program plans. 420.17 Section 420.17 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION STATE ENERGY PROGRAM Formula Grant Procedures § 420.17 Optional elements of State Energy Program plans. (a) Other appropriate activities or...

10 CFR 420.17 - Optional elements of State Energy Program plans.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Optional elements of State Energy Program plans. 420.17 Section 420.17 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION STATE ENERGY PROGRAM Formula Grant Procedures § 420.17 Optional elements of State Energy Program plans. (a) Other appropriate activities or...

10 CFR Appendix D to Part 436 - Energy Program Conservation Elements

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Energy Program Conservation Elements D Appendix D to Part 436 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Pt. 436, App. D Appendix D to Part 436—Energy Program Conservation Elements (a) In all successful energy...

The Specificity of Innate Immune Responses Is Enforced by Repression of Interferon Response Elements by NF-κB p50

PubMed Central

Cheng, Christine S.; Feldman, Kristyn E.; Lee, James; Verma, Shilpi; Huang, De-Bin; Huynh, Kim; Chang, Mikyoung; Ponomarenko, Julia V.; Sun, Shao-Cong; Benedict, Chris A.; Ghosh, Gourisankar; Hoffmann, Alexander

2011-01-01

The specific binding of transcription factors to cognate sequence elements is thought to be critical for the generation of specific gene expression programs. Members of the nuclear factor κB (NF-κB) and interferon (IFN) regulatory factor (IRF) transcription factor families bind to the κB site and the IFN response element (IRE), respectively, of target genes, and they are activated in macrophages after exposure to pathogens. However, how these factors produce pathogen-specific inflammatory and immune responses remains poorly understood. Combining top-down and bottom-up systems biology approaches, we have identified the NF-κB p50 homodimer as a regulator of IRF responses. Unbiased genome-wide expression and biochemical and structural analyses revealed that the p50 homodimer repressed a subset of IFN-inducible genes through a previously uncharacterized subclass of guanine-rich IRE (G-IRE) sequences. Mathematical modeling predicted that the p50 homodimer might enforce the stimulus specificity of composite promoters. Indeed, the production of the antiviral regulator IFN-β was rendered stimulus-specific by the binding of the p50 homodimer to the G-IRE–containing IFNβ enhancer to suppress cytotoxic IFN signaling. Specifically, a deficiency in p50 resulted in the inappropriate production of IFN-β in response to bacterial DNA sensed by Toll-like receptor 9. This role for the NF-κB p50 homodimer in enforcing the specificity of the cellular response to pathogens by binding to a subset of IRE sequences alters our understanding of how the NF-κB and IRF signaling systems cooperate to regulate antimicrobial immunity. PMID:21343618

Regular Mechanical Transformation of Rotations Into Translations: Part 2. Kinematic Synthesis of the Elements of High Kinematic Joints, Realizing the Process of Motions Transformation

NASA Astrophysics Data System (ADS)

Abadjieva, Emilia; Abadjiev, Valentin

2017-09-01

This work is developed on the basis of the illustrated main parts of the kinematic theory (theory of gearing) of the spatial rack drives in Part 1 of this study. The applied theoretical approach to their synthesis, based on the T. Olivier's second principle is defined. A study of the geometric nature of the surface of action (mesh region, respectively) of these class transmissions is shown. Research software programs for synthesis and visualization of these transmissions and their specific elements are elaborated, on the basis of the given algorithms to the synthesis of the elements of high kinematic joints (active tooth surfaces), with which the movable links of the studied gear systems are equipped.

AutoCAD-To-NASTRAN Translator Program

NASA Technical Reports Server (NTRS)

Jones, A.

1989-01-01

Program facilitates creation of finite-element mathematical models from geometric entities. AutoCAD to NASTRAN translator (ACTON) computer program developed to facilitate quick generation of small finite-element mathematical models for use with NASTRAN finite-element modeling program. Reads geometric data of drawing from Data Exchange File (DXF) used in AutoCAD and other PC-based drafting programs. Written in Microsoft Quick-Basic (Version 2.0).

Sensors 2000! Program: Advanced Biosensor and Measurement Systems Technologies for Spaceflight Research and Concurrent, Earth-Based Applications

NASA Technical Reports Server (NTRS)

Hines, J.

1999-01-01

Sensors 2000! (S2K!) is a specialized, integrated projects team organized to provide focused, directed, advanced biosensor and bioinstrumentation systems technology support to NASA's spaceflight and ground-based research and development programs. Specific technology thrusts include telemetry-based sensor systems, chemical/ biological sensors, medical and physiological sensors, miniaturized instrumentation architectures, and data and signal processing systems. A concurrent objective is to promote the mutual use, application, and transition of developed technology by collaborating in academic-commercial-govemment leveraging, joint research, technology utilization and commercialization, and strategic partnering alliances. Sensors 2000! is organized around three primary program elements: Technology and Product Development, Technology infusion and Applications, and Collaborative Activities. Technology and Product Development involves development and demonstration of biosensor and biotelemetry systems for application to NASA Space Life Sciences Programs; production of fully certified spaceflight hardware and payload elements; and sensor/measurement systems development for NASA research and development activities. Technology Infusion and Applications provides technology and program agent support to identify available and applicable technologies from multiple sources for insertion into NASA's strategic enterprises and initiatives. Collaborative Activities involve leveraging of NASA technologies with those of other government agencies, academia, and industry to concurrently provide technology solutions and products of mutual benefit to participating members.

Bi-functional, substrate mimicking RNA inhibits MSK1-mediated cAMP-response element-binding protein phosphorylation and reveals magnesium ion-dependent conformational changes of the kinase.

PubMed

Hamm, Jorg; Alessi, Dario R; Biondi, Ricardo M

2002-11-29

The design of specific inhibitors for protein kinases is an important step toward elucidation of intracellular signal transduction pathways and to guide drug discovery programs. We devised a model approach to generate specific, competitive kinase inhibitors by isolating substrate mimics containing two independent binding sites with an anti-idiotype strategy from combinatorial RNA libraries. As a general test for the ability to generate highly specific kinase inhibitors, we selected the transcription factor cAMP-response element-binding protein (CREB) that is phosphorylated on the same serine residue by the protein kinase MSK1 as well as by RSK1. The sequences and structures of these kinases are very similar, about 60% of their amino acids are identical. Nevertheless, we can demonstrate that the selected RNA inhibitors inhibit specifically CREB phosphorylation by MSK1 but do not affect CREB phosphorylation by RSK1. The inhibitors interact preferentially with the inactive form of MSK1. Furthermore, we demonstrate that RNA ligands can be conformation-specific probes, and this feature allowed us to describe magnesium ion-dependent conformational changes of MSK1 upon activation.

Preventing Occupational Skin Disease: A Review of Training Programs.

PubMed

Zack, Bethany; Arrandale, Victoria H; Holness, D Linn

Occupational contact dermatitis (OCD) is a common occupational disease that impacts a variety of worker groups. Skin protection and disease prevention training programs have shown promise for improving prevention practices and reducing the incidence of OCD. This review details the features of training programs for primary prevention of OCD and identifies gaps in the literature. Twelve studies were identified for in-depth review: many studies included wet workers employed in health care, hairdressing, cleaning, and food preparation; 1 program featured manufacturing workers. Few programs provided content on allergic contact dermatitis, and only 1 was evaluated for long-term effectiveness. Effective programs were similar in content, delivery method, and timing and were characterized by industry specificity, multimodal learning, participatory elements, skin care resource provision, repeated sessions, and management engagement. Long-term effectiveness, generalizability beyond OCD, workplace health and safety culture impact, and translation of programs in the North American context represent areas for future research.

Common elements of adolescent prevention programs: minimizing burden while maximizing reach.

PubMed

Boustani, Maya M; Frazier, Stacy L; Becker, Kimberly D; Bechor, Michele; Dinizulu, Sonya M; Hedemann, Erin R; Ogle, Robert R; Pasalich, Dave S

2015-03-01

A growing number of evidence-based youth prevention programs are available, but challenges related to dissemination and implementation limit their reach and impact. The current review identifies common elements across evidence-based prevention programs focused on the promotion of health-related outcomes in adolescents. We reviewed and coded descriptions of the programs for common practice and instructional elements. Problem-solving emerged as the most common practice element, followed by communication skills, and insight building. Psychoeducation, modeling, and role play emerged as the most common instructional elements. In light of significant comorbidity in poor outcomes for youth, and corresponding overlap in their underlying skills deficits, we propose that synthesizing the prevention literature using a common elements approach has the potential to yield novel information and inform prevention programming to minimize burden and maximize reach and impact for youth.

Quality-assurance study of the special - purpose finite-element program - SPECTROM: I. Thermal, thermoelastic, and viscoelastic problems. [Comparison with MARC-CDC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, R.A.

1980-12-01

This comparison study involves a preliminary verification of finite element calculations. The methodology of the comparison study consists of solving four example problems with both the SPECTROM finite element program and the MARC-CDC general purpose finite element program. The results show close agreement for all example problems.

Working session 3: Tubing integrity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cueto-Felgueroso, C.; Strosnider, J.

1997-02-01

Twenty-three individuals representing nine countries (Belgium, Canada, the Czech Republic, France, Japan, the Slovak Republic, Spain, the UK, and the US) participated in the session on tube integrity. These individuals represented utilities, vendors, consultants and regulatory authorities. The major subjects discussed by the group included overall objectives of managing steam generator tube degradation, necessary elements of a steam generator degradation management program, the concept of degradation specific management, structural integrity evaluations, leakage evaluations, and specific degradation mechanisms. The group`s discussions on these subjects, including conclusions and recommendations, are summarized in this article.

PLANS; a finite element program for nonlinear analysis of structures. Volume 2: User's manual

NASA Technical Reports Server (NTRS)

Pifko, A.; Armen, H., Jr.; Levy, A.; Levine, H.

1977-01-01

The PLANS system, rather than being one comprehensive computer program, is a collection of finite element programs used for the nonlinear analysis of structures. This collection of programs evolved and is based on the organizational philosophy in which classes of analyses are treated individually based on the physical problem class to be analyzed. Each of the independent finite element computer programs of PLANS, with an associated element library, can be individually loaded and used to solve the problem class of interest. A number of programs have been developed for material nonlinear behavior alone and for combined geometric and material nonlinear behavior. The usage, capabilities, and element libraries of the current programs include: (1) plastic analysis of built-up structures where bending and membrane effects are significant, (2) three dimensional elastic-plastic analysis, (3) plastic analysis of bodies of revolution, and (4) material and geometric nonlinear analysis of built-up structures.

A computer graphics program for general finite element analyses

NASA Technical Reports Server (NTRS)

Thornton, E. A.; Sawyer, L. M.

1978-01-01

Documentation for a computer graphics program for displays from general finite element analyses is presented. A general description of display options and detailed user instructions are given. Several plots made in structural, thermal and fluid finite element analyses are included to illustrate program options. Sample data files are given to illustrate use of the program.

Lapin Data Interchange Among Database, Analysis and Display Programs Using XML-Based Text Files

NASA Technical Reports Server (NTRS)

2004-01-01

The purpose was to investigate and evaluate the interchange of application- specific data among multiple programs each carrying out part of the analysis and design task. This has been carried out previously by creating a custom program to read data produced by one application and then write that data to a file whose format is specific to the second application that needs all or part of that data. In this investigation, data of interest is described using the XML markup language that allows the data to be stored in a text-string. Software to transform output data of a task into an XML-string and software to read an XML string and extract all or a portion of the data needed for another application is used to link two independent applications together as part of an overall design effort. This approach was initially used with a standard analysis program, Lapin, along with standard applications a standard spreadsheet program, a relational database program, and a conventional dialog and display program to demonstrate the successful sharing of data among independent programs. See Engineering Analysis Using a Web-Based Protocol by J.D. Schoeffler and R.W. Claus, NASA TM-2002-211981, October 2002. Most of the effort beyond that demonstration has been concentrated on the inclusion of more complex display programs. Specifically, a custom-written windowing program organized around dialogs to control the interactions have been combined with an independent CAD program (Open Cascade) that supports sophisticated display of CAD elements such as lines, spline curves, and surfaces and turbine-blade data produced by an independent blade design program (UD0300).

A system-level model for the microbial regulatory genome.

PubMed

Brooks, Aaron N; Reiss, David J; Allard, Antoine; Wu, Wei-Ju; Salvanha, Diego M; Plaisier, Christopher L; Chandrasekaran, Sriram; Pan, Min; Kaur, Amardeep; Baliga, Nitin S

2014-07-15

Microbes can tailor transcriptional responses to diverse environmental challenges despite having streamlined genomes and a limited number of regulators. Here, we present data-driven models that capture the dynamic interplay of the environment and genome-encoded regulatory programs of two types of prokaryotes: Escherichia coli (a bacterium) and Halobacterium salinarum (an archaeon). The models reveal how the genome-wide distributions of cis-acting gene regulatory elements and the conditional influences of transcription factors at each of those elements encode programs for eliciting a wide array of environment-specific responses. We demonstrate how these programs partition transcriptional regulation of genes within regulons and operons to re-organize gene-gene functional associations in each environment. The models capture fitness-relevant co-regulation by different transcriptional control mechanisms acting across the entire genome, to define a generalized, system-level organizing principle for prokaryotic gene regulatory networks that goes well beyond existing paradigms of gene regulation. An online resource (http://egrin2.systemsbiology.net) has been developed to facilitate multiscale exploration of conditional gene regulation in the two prokaryotes. © 2014 The Authors. Published under the terms of the CC BY 4.0 license.

Combining high performance simulation, data acquisition, and graphics display computers

NASA Technical Reports Server (NTRS)

Hickman, Robert J.

1989-01-01

Issues involved in the continuing development of an advanced simulation complex are discussed. This approach provides the capability to perform the majority of tests on advanced systems, non-destructively. The controlled test environments can be replicated to examine the response of the systems under test to alternative treatments of the system control design, or test the function and qualification of specific hardware. Field tests verify that the elements simulated in the laboratories are sufficient. The digital computer is hosted by a Digital Equipment Corp. MicroVAX computer with an Aptec Computer Systems Model 24 I/O computer performing the communication function. An Applied Dynamics International AD100 performs the high speed simulation computing and an Evans and Sutherland PS350 performs on-line graphics display. A Scientific Computer Systems SCS40 acts as a high performance FORTRAN program processor to support the complex, by generating numerous large files from programs coded in FORTRAN that are required for the real time processing. Four programming languages are involved in the process, FORTRAN, ADSIM, ADRIO, and STAPLE. FORTRAN is employed on the MicroVAX host to initialize and terminate the simulation runs on the system. The generation of the data files on the SCS40 also is performed with FORTRAN programs. ADSIM and ADIRO are used to program the processing elements of the AD100 and its IOCP processor. STAPLE is used to program the Aptec DIP and DIA processors.

The Basic Structure of Community Early Intervention Programs for Children with Autism: Provider Descriptions

PubMed Central

Stahmer, Aubyn C.

2007-01-01

Autism researchers have identified a set of common effective practice elements for early intervention (EI) (e.g., intensive programming). The current study examined the reported about use of common elements of effective interventions in community EI settings. Eighty EI providers reported about their programs. The majority of participants reported using common effective elements, however, the depth and quality of the use of these elements was highly variable. Taking community program structure into account in future research will facilitate the development of methodologies, which immediately fit into the context of community programming rather than requiring program adaptation for use in the real world. Recommendations for using current community program structure to improve use of evidence-based practices are discussed. PMID:17086438

Overview of NASA's Thermal Control System Development for Exploration Project

NASA Technical Reports Server (NTRS)

Stephan, Ryan A.

2011-01-01

The now-cancelled Constellation Program included the Orion, Altair, and Lunar Surface Systems project offices. The first two elements, Orion and Altair, were planned to be manned space vehicles while the third element was much more diverse and included several sub-elements. Among other things, these sub-elements were Rovers and a Lunar Habitat. The planned missions involving these systems and vehicles included several risks and design challenges. Due to the unique thermal operating environment, many of these risks and challenges were associated with the vehicles thermal control system. NASA s Exploration Technology Development Program (ETDP) consisted of various technology development projects. The project chartered with mitigating the aforementioned thermal risks and design challenges was the Thermal Control System Development for Exploration Project. These risks and design challenges were being addressed through a rigorous technology development process that was planned to culminate with an integrated thermal control system test. Although the technologies being developed were originally aimed towards mitigating specific Constellation risks, the technology development process is being continued within a new program. This continued effort is justified by the fact that many of the technologies are generically applicable to future spacecraft thermal control systems. The current paper summarizes the development efforts being performed by the technology development project. The development efforts involve heat acquisition and heat rejection hardware including radiators, heat exchangers, and evaporators. The project has also been developing advanced phase change material heat sinks and performing a material compatibility assessment for a promising thermal control system working fluid. The to-date progress and lessons-learned from these development efforts will be discussed throughout the paper.

Telerobotic rendezvous and docking vision system architecture

NASA Technical Reports Server (NTRS)

Gravely, Ben; Myers, Donald; Moody, David

1992-01-01

This research program has successfully demonstrated a new target label architecture that allows a microcomputer to determine the position, orientation, and identity of an object. It contains a CAD-like database with specific geometric information about the object for approach, grasping, and docking maneuvers. Successful demonstrations were performed selecting and docking an ORU box with either of two ORU receptacles. Small, but significant differences were seen in the two camera types used in the program, and camera sensitive program elements have been identified. The software has been formatted into a new co-autonomy system which provides various levels of operator interaction and promises to allow effective application of telerobotic systems while code improvements are continuing.

Shuttle Ground Operations Efficiencies/Technologies (SGOE/T) study. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Scholz, A. L.; Hart, M. T.; Lowry, D. J.

1987-01-01

Methods and technolgoy were defined to reduce the overall operations cost of a major space program. Space Shuttle processing at Kennedy Space Center (KSC) was designed as the working model that would be the source of the operational information. Methods of improving efficiency of ground operations were assessed and technology elements that could reduce cost identified. Emphasis is on: (1) specific technology items and (2) management approaches required to develop and support efficient ground operations. Prime study results are to be recommendations on how to achieve more efficient operations and identification of existing or new technology that would make vehicle processing in both the current program and future programs more efficient and, therefore, less costly.

Integrating Science and Engineering to Implement Evidence-Based Practices in Health Care Settings.

PubMed

Wu, Shinyi; Duan, Naihua; Wisdom, Jennifer P; Kravitz, Richard L; Owen, Richard R; Sullivan, J Greer; Wu, Albert W; Di Capua, Paul; Hoagwood, Kimberly Eaton

2015-09-01

Integrating two distinct and complementary paradigms, science and engineering, may produce more effective outcomes for the implementation of evidence-based practices in health care settings. Science formalizes and tests innovations, whereas engineering customizes and optimizes how the innovation is applied tailoring to accommodate local conditions. Together they may accelerate the creation of an evidence-based healthcare system that works effectively in specific health care settings. We give examples of applying engineering methods for better quality, more efficient, and safer implementation of clinical practices, medical devices, and health services systems. A specific example was applying systems engineering design that orchestrated people, process, data, decision-making, and communication through a technology application to implement evidence-based depression care among low-income patients with diabetes. We recommend that leading journals recognize the fundamental role of engineering in implementation research, to improve understanding of design elements that create a better fit between program elements and local context.

Using RSAT to scan genome sequences for transcription factor binding sites and cis-regulatory modules.

PubMed

Turatsinze, Jean-Valery; Thomas-Chollier, Morgane; Defrance, Matthieu; van Helden, Jacques

2008-01-01

This protocol shows how to detect putative cis-regulatory elements and regions enriched in such elements with the regulatory sequence analysis tools (RSAT) web server (http://rsat.ulb.ac.be/rsat/). The approach applies to known transcription factors, whose binding specificity is represented by position-specific scoring matrices, using the program matrix-scan. The detection of individual binding sites is known to return many false predictions. However, results can be strongly improved by estimating P value, and by searching for combinations of sites (homotypic and heterotypic models). We illustrate the detection of sites and enriched regions with a study case, the upstream sequence of the Drosophila melanogaster gene even-skipped. This protocol is also tested on random control sequences to evaluate the reliability of the predictions. Each task requires a few minutes of computation time on the server. The complete protocol can be executed in about one hour.

47 CFR 51.509 - Rate structure standards for specific elements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 3 2014-10-01 2014-10-01 false Rate structure standards for specific elements... SERVICES (CONTINUED) INTERCONNECTION Pricing of Elements § 51.509 Rate structure standards for specific elements. In addition to the general rules set forth in § 51.507, rates for specific elements shall comply...

47 CFR 51.509 - Rate structure standards for specific elements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 3 2012-10-01 2012-10-01 false Rate structure standards for specific elements... SERVICES (CONTINUED) INTERCONNECTION Pricing of Elements § 51.509 Rate structure standards for specific elements. In addition to the general rules set forth in § 51.507, rates for specific elements shall comply...

47 CFR 51.509 - Rate structure standards for specific elements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Rate structure standards for specific elements... SERVICES (CONTINUED) INTERCONNECTION Pricing of Elements § 51.509 Rate structure standards for specific elements. In addition to the general rules set forth in § 51.507, rates for specific elements shall comply...

47 CFR 51.509 - Rate structure standards for specific elements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 3 2011-10-01 2011-10-01 false Rate structure standards for specific elements... SERVICES (CONTINUED) INTERCONNECTION Pricing of Elements § 51.509 Rate structure standards for specific elements. In addition to the general rules set forth in § 51.507, rates for specific elements shall comply...

47 CFR 51.509 - Rate structure standards for specific elements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 3 2013-10-01 2013-10-01 false Rate structure standards for specific elements... SERVICES (CONTINUED) INTERCONNECTION Pricing of Elements § 51.509 Rate structure standards for specific elements. In addition to the general rules set forth in § 51.507, rates for specific elements shall comply...

Method for determining the composition and orientation of III-V {001} semiconductor surfaces

NASA Astrophysics Data System (ADS)

Sung, M. M.; Kim, C.; Rabalais, J. W.

1996-09-01

A method for determining the composition and orientation of III-V {001} semiconductor surfaces is presented and applications are described. The information is obtained from the techniques of time-of-flight scattering and recoiling spectrometry (TOF-SARS), using the composition from azimuth-specific elemental accessibilities (CASEA) method, and low energy electron diffraction (LEED). The azimuth-specific elemental accessibilities (ASEA) are measured experimentally and calculated from the number of accessible atoms in the unit cell and from three-dimensional trajectory simulations using the SARIC program. The in situ analyses identify the 1st-layer elemental species and determine the orientation of the reconstructed surface symmetry elements with respect to the bulk crystallographic directions. This is demonstrated for the III-V {001} compound semiconductor surfaces of GaAs and InAs in the (4 × 2) and (4 × 2) phases and InP in the (4 × 2) phase. The analyses confirm the missing-row-dimer (MRD) structure for GaAs and InAs in which the missing row direction is parallel to the direction of the 1st-layer multimers (dimers) and the missing-row-trimer-dimer (MRTD) structure for InP in which the missing row direction is perpendicular to the direction of the 1st-layer multimers (trimers).

Adding a Time-Series Design Element to the Success Case Method to Improve Methodological Rigor: An Application for Nonprofit Program Evaluation

ERIC Educational Resources Information Center

Coryn, Chris L. S.; Schroter, Daniela C.; Hanssen, Carl E.

2009-01-01

Brinkerhoff's Success Case Method (SCM) was developed with the specific purpose of assessing the impact of organizational interventions (e.g., training and coaching) on business goals by analyzing extreme groups using case study techniques and storytelling. As an efficient and cost-effective method of evaluative inquiry, SCM is attractive in other…

The Effects of DHEA on Resilience to PTSD

DTIC Science & Technology

2011-04-01

Resilience to PTSD Authors Cassandra M. Ellington Scott J. Wright Lolita M. Burrell Michael D. Matthews United States Military Academy...to PTSD 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Cassandra Ellington; Scott Wright; Lolita Burrell; Michael...Chilcoat, H. D., Kessler, R. C., Peterson, E. L., & Lucia, V. C. (1999). Vulnerability to assaultive violence: Further specification of the sex

Recent developments of NASTRAN pre- amd post-processors: Response spectrum analysis (RESPAN) and interactive graphics (GIFTS)

NASA Technical Reports Server (NTRS)

Hirt, E. F.; Fox, G. L.

1982-01-01

Two specific NASTRAN preprocessors and postprocessors are examined. A postprocessor for dynamic analysis and a graphical interactive package for model generation and review of resuls are presented. A computer program that provides response spectrum analysis capability based on data from NASTRAN finite element model is described and the GIFTS system, a graphic processor to augment NASTRAN is introduced.

Motivating the Knowledge Worker

DTIC Science & Technology

2010-01-01

GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S...AND ADDRESS(ES) Defense Intelligence Agency Acquisition,Arlington,VA,22202 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY...interpret, and synthesize information within specific subject areas to advance the overall understanding of those areas and allow organizations to make

A Study of Placing Army Requirements on Contract

DTIC Science & Technology

2016-04-01

perhaps being unable to control the external environment, has management authority over business and technical aspects of a specific program. The PM...research is the last element of the planning phase addressing both business and technical considerations. The acquisition team equips themselves with...report is the final product utilizing documented findings and supports the business strategy (DoD, Guidebook for the Acquisition of Services, 2011

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 6: In-depth element investigation

NASA Technical Reports Server (NTRS)

Hanley, G.

1979-01-01

Computer assisted design of a gallium arsenide solid state dc-to-RF converter with supportive fabrication data was investigated. Specific tasks performed include: computer program checkout; amplifier comparisons; computer design analysis of GaSa solar cells; and GaAs diode evaluation. Results obtained in the design and evaluation of transistors for the microwave space power system are presented.

Constraints in Genetic Programming

NASA Technical Reports Server (NTRS)

Janikow, Cezary Z.

1996-01-01

Genetic programming refers to a class of genetic algorithms utilizing generic representation in the form of program trees. For a particular application, one needs to provide the set of functions, whose compositions determine the space of program structures being evolved, and the set of terminals, which determine the space of specific instances of those programs. The algorithm searches the space for the best program for a given problem, applying evolutionary mechanisms borrowed from nature. Genetic algorithms have shown great capabilities in approximately solving optimization problems which could not be approximated or solved with other methods. Genetic programming extends their capabilities to deal with a broader variety of problems. However, it also extends the size of the search space, which often becomes too large to be effectively searched even by evolutionary methods. Therefore, our objective is to utilize problem constraints, if such can be identified, to restrict this space. In this publication, we propose a generic constraint specification language, powerful enough for a broad class of problem constraints. This language has two elements -- one reduces only the number of program instances, the other reduces both the space of program structures as well as their instances. With this language, we define the minimal set of complete constraints, and a set of operators guaranteeing offspring validity from valid parents. We also show that these operators are not less efficient than the standard genetic programming operators if one preprocesses the constraints - the necessary mechanisms are identified.

Risk of Adverse Health Outcomes and Decrements in Performance Due to In-flight Medical Conditions

NASA Technical Reports Server (NTRS)

Antonsen,Erik

2017-01-01

The drive to undertake long-duration space exploration missions at greater distances from Earth gives rise to many challenges concerning human performance under extreme conditions. At NASA, the Human Research Program (HRP) has been established to investigate the specific risks to astronaut health and performance presented by space exploration, in addition to developing necessary countermeasures and technology to reduce risk and facilitate safer, more productive missions in space (NASA Human Research Program 2009). The HRP is divided into five subsections, covering behavioral health, space radiation, habitability, and other areas of interest. Within this structure is the ExMC Element, whose research contributes to the overall development of new technologies to overcome the challenges of expanding human exploration and habitation of space. The risk statement provided by the HRP to the ExMC Element states: "Given that medical conditions/events will occur during human spaceflight missions, there is a possibility of adverse health outcomes and decrements in performance in mission and for long term health" (NASA Human Research Program 2016). Within this risk context, the Exploration Medical Capabilities (ExMC) Element is specifically concerned with establishing evidenced-based methods of monitoring and maintaining astronaut health. Essential to completing this task is the advancement in techniques that identify, prevent, and treat any health threats that may occur during space missions. The ultimate goal of the ExMC Element is to develop and demonstrate a pathway for medical system integration into vehicle and mission design to mitigate the risk of medical issues. Integral to this effort is inclusion of an evidence-based medical and data handling system appropriate for long-duration, exploration-class missions. This requires a clear Concept of Operations, quantitative risk metrics or other tools to address changing risk throughout a mission, and system scoping and system engineering. Because of the novel nature of the risks involved in exploration missions, new and complex ethical challenges are likely to be encountered. This document describes the relevant background and evidence that informs the development of an exploration medical system.

Studies of finite element analysis of composite material structures

NASA Technical Reports Server (NTRS)

Douglas, D. O.; Holzmacher, D. E.; Lane, Z. C.; Thornton, E. A.

1975-01-01

Research in the area of finite element analysis is summarized. Topics discussed include finite element analysis of a picture frame shear test, BANSAP (a bandwidth reduction program for SAP IV), FEMESH (a finite element mesh generation program based on isoparametric zones), and finite element analysis of a composite bolted joint specimens.

The US Food and Drug Administration's Risk Evaluation and Mitigation Strategy (REMS) Program - Current Status and Future Direction.

PubMed

Wu, Jasmanda; Juhaeri, Juhaeri

2016-12-01

The US Food and Drug Administration (FDA) Amendments Act of 2007 granted the FDA new authorities to enhance drug safety by requiring application holders to submit a proposed Risk Evaluation and Mitigation Strategy (REMS). A REMS is a required risk management plan that uses tools beyond the package insert. REMS elements may include a medication guide and patient package insert for patients and a communication plan focused on health care professionals. Elements to assure safe use (ETASUs) are put in place to mitigate a specific known serious risk when other less restrictive elements of a REMS are not sufficient to mitigate such risk. An implementation system is required for an REMS that includes the ETASUs. With approximately eight years of experience with REMS programs, many health care settings have created systems to manage REMS and also to integrate REMS into their practice settings. At the same time, there are issues associated with the development and implementation of REMS. In 2011, FDA created the REMS Integration Initiative to develop guidance on how to apply statutory criteria to determine when a REMS is required, to improve standardization and assessment of REMS, and to improve integration of REMS into the existing healthcare system. A key component of the REMS Integration Initiative is stakeholder outreach to better understand how existing REMS programs are working and to identify opportunities for improvement. This review attempts to share our company's experience with the REMS program, and to provide updates on FDA's efforts to improve REMS communication, to standardize REMS process, to reduce REMS program burdens and to build a common REMS platform. Copyright © 2016 Elsevier HS Journals, Inc. All rights reserved.

SilMush: A procedure for modeling of the geochemical evolution of silicic magmas and granitic rocks

NASA Astrophysics Data System (ADS)

Hertogen, Jan; Mareels, Joyce

2016-07-01

A boundary layer crystallization modeling program is presented that specifically addresses the chemical fractionation in silicic magma systems and the solidification of plutonic bodies. The model is a Langmuir (1989) type approach and does not invoke crystal settling in high-viscosity silicic melts. The primary aim is to model a granitic rock as a congealed crystal-liquid mush, and to integrate major element and trace element modeling. The procedure allows for some exploratory investigation of the exsolution of H2O-fluids and of the fluid/melt partitioning of trace elements. The procedure is implemented as a collection of subroutines for the MS Excel spreadsheet environment and is coded in the Visual Basic for Applications (VBA) language. To increase the flexibility of the modeling, the procedure is based on discrete numeric process simulation rather than on solution of continuous differential equations. The program is applied to a study of the geochemical variation within and among three granitic units (Senones, Natzwiller, Kagenfels) from the Variscan Northern Vosges Massif, France. The three units cover the compositional range from monzogranite, over syenogranite to alkali-feldspar granite. An extensive set of new major element and trace element data is presented. Special attention is paid to the essential role of accessory minerals in the fractionation of the Rare Earth Elements. The crystallization model is able to reproduce the essential major and trace element variation trends in the data sets of the three separate granitic plutons. The Kagenfels alkali-feldspar leucogranite couples very limited variation in major element composition to a considerable and complex variation of trace elements. The modeling results can serve as a guide for the reconstruction of the emplacement sequence of petrographically distinct units. Although the modeling procedure essentially deals with geochemical fractionation within a single pluton, the modeling results bring up a number of questions about the petrogenetic relationships among parental magmas of nearly coeval granitic units emplaced in close proximity.

36 CFR 72.43 - Fundable elements: Recovery Action Program grants.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 1 2013-07-01 2013-07-01 false Fundable elements: Recovery Action Program grants. 72.43 Section 72.43 Parks, Forests, and Public Property NATIONAL PARK SERVICE... Development, Rehabilitation and Innovation § 72.43 Fundable elements: Recovery Action Program grants...

36 CFR 72.43 - Fundable elements: Recovery Action Program grants.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 1 2012-07-01 2012-07-01 false Fundable elements: Recovery Action Program grants. 72.43 Section 72.43 Parks, Forests, and Public Property NATIONAL PARK SERVICE... Development, Rehabilitation and Innovation § 72.43 Fundable elements: Recovery Action Program grants...

36 CFR 72.43 - Fundable elements: Recovery Action Program grants.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 1 2014-07-01 2014-07-01 false Fundable elements: Recovery Action Program grants. 72.43 Section 72.43 Parks, Forests, and Public Property NATIONAL PARK SERVICE... Development, Rehabilitation and Innovation § 72.43 Fundable elements: Recovery Action Program grants...

36 CFR 72.43 - Fundable elements: Recovery Action Program grants.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Fundable elements: Recovery Action Program grants. 72.43 Section 72.43 Parks, Forests, and Public Property NATIONAL PARK SERVICE... Development, Rehabilitation and Innovation § 72.43 Fundable elements: Recovery Action Program grants...

36 CFR 72.43 - Fundable elements: Recovery Action Program grants.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Fundable elements: Recovery Action Program grants. 72.43 Section 72.43 Parks, Forests, and Public Property NATIONAL PARK SERVICE... Development, Rehabilitation and Innovation § 72.43 Fundable elements: Recovery Action Program grants...

Space Station Freedom - Optimized to support microgravity research and earth observations

NASA Technical Reports Server (NTRS)

Bilardo, Vincent J., Jr.; Herman, Daniel J.

1990-01-01

The Space Station Freedom Program is reviewed, with particular attention given to the Space Station configuration, program elements description, and utilization accommodation. Since plans call for the assembly of the initial SSF configuration over a 3-year time span, it is NASA's intention to perform useful research on it during the assembly process. The research will include microgravity experiments and observational sciences. The specific attributes supporting these attempts are described, such as maintainance of a very low microgravity level and continuous orientation of the vehicle to maintain a stable, accurate local-vertical/local-horizontal attitude.

Antenna Characterization for the Wideband Instrument for Snow Measurements

NASA Technical Reports Server (NTRS)

Lambert, Kevin M.; Miranda, Felix A.; Romanofsky, Robert R.; Durham, Timothy E.; Vanhille, Kenneth J.

2015-01-01

Experimental characterization of the antenna for the Wideband Instrument for Snow Measurements (WISM) under development for the NASA Earth Science Technology Office (ESTO) Instrument Incubator Program (IIP), is discussed. A current sheet antenna, consisting of a small, 6x6 element, dual-linear polarized array with integrated beamformer, feeds an offset parabolic reflector, enabling WISM operation over an 8 to 40 GHz frequency band. An overview of the test program implemented for both the feed and the reflector antenna is given along with select results for specific frequencies utilized by the radar and radiometric sensors of the WISM.

Antenna Characterization for the Wideband Instrument for Snow Measurements (WISM)

NASA Technical Reports Server (NTRS)

Lambert, Kevin M.; Miranda, Felix A.; Romanofsky, Robert R.; Durham, Timothy E.; Vanhille, Kenneth J.

2015-01-01

Experimental characterization of the antenna for the Wideband Instrument for Snow Measurement (WISM) under development for the NASA Earth Science Technology Office (ESTO) Instrument Incubator Program (IIP), is discussed. A current sheet antenna, consisting of a small, 6x6 element, dual-linear polarized array with integrated beamformer, feeds an offset parabolic reflector, enabling WISM operation over an 8 to 40 GHz frequency band. An overview of the test program implemented for both the feed and the reflector antenna is given along with select results for specific frequencies utilized by the radar and radiometric sensors of the WISM.

Rover nuclear rocket engine program: Overview of rover engine tests

NASA Technical Reports Server (NTRS)

Finseth, J. L.

1991-01-01

The results of nuclear rocket development activities from the inception of the ROVER program in 1955 through the termination of activities on January 5, 1973 are summarized. This report discusses the nuclear reactor test configurations (non cold flow) along with the nuclear furnace demonstrated during this time frame. Included in the report are brief descriptions of the propulsion systems, test objectives, accomplishments, technical issues, and relevant test results for the various reactor tests. Additionally, this document is specifically aimed at reporting performance data and their relationship to fuel element development with little or no emphasis on other (important) items.

Global/Local: What Does It Mean for Global Health Educators and How Do We Do It?

PubMed

Rowthorn, Virginia

2015-01-01

There has been dramatic growth in the number of innovative university programs that focus on social justice and teach community-based strategies that are applicable both domestically in North America and internationally. These programs often are referred to as global/local and reflect an effort to link global health and campus community engagement efforts to acknowledge that a common set of transferable skills can be adapted to work with vulnerable populations wherever they may be. However, the concepts underlying global/local education are undertheorized and universities struggle to make the global/local link without a conceptual framework to guide them in this pursuit. This study reports on the outcomes of a 2015 national meeting of 120 global health educators convened to discuss the concepts underlying global/local education, to share models of global/local programs, and to draft a preliminary list of critical elements of a meaningful and didactically sound global/local educational program. A qualitative analysis was conducted of the discussions that took place at the national meeting. The analysis was supported by videorecordings made of full-group discussions. Results were categorized into a preliminary list of global/local program elements. Additionally, a synthesis was developed of critical issues raised at the meeting that warrant future discussion and study. A preliminary list was developed of 7 program components that global health educators consider essential to categorize a program as global/local and to ensure that such a program includes specific critical elements. Interest is great among global health educators to understand and teach the conceptual link between learning on both the global and community levels. Emphasis on this link has high potential to unite the siloed fields of global health and domestic community public health and the institutions, funding options, and career pathways that flow from them. Future research should focus on implementation of global/local programming and evaluation of student learning and community health outcomes related to such programs. Copyright © 2015 The Author. Published by Elsevier Inc. All rights reserved.

Alumni Perspectives on Career Preparation during a Postdoctoral Training Program: A Qualitative Study

PubMed Central

Faupel-Badger, Jessica M.; Raue, Kimberley; Nelson, David E.; Tsakraklides, Sophia

2015-01-01

Published evaluations of career preparation of alumni from long-standing postdoctoral fellowship programs in the biomedical sciences are limited and often focus on quantitative analysis of data from extant publicly available sources. Qualitative methods provide the opportunity to gather robust information about specific program elements from structured postdoctoral training programs and the influence of this training on subsequent career paths of alumni. In-depth interviews with a subset of the National Cancer Institute’s Cancer Prevention Fellowship Program (CPFP) alumni (n = 27), representing more than 25 years of the program’s history and multiple career sectors, were conducted to assess alumni reflections on the training environment and career preparation during their time in the CPFP. NVivo software was used to analyze data and identify major themes. Four main themes emerged from these interviews, including: the value of structured training curriculum, mentorship, transdisciplinary environment, and professional identity. Even when reflecting on training that occurred one to two decades earlier, alumni were able to highlight specific components of a structured postdoctoral training program as influencing their research and career trajectories. These results may have relevance for those interested in assessing how postdoctoral training can influence fellows throughout their careers and understanding salient features of structured programs. PMID:25673353

Pollution technology program, can-annular combustor engines

NASA Technical Reports Server (NTRS)

Roberts, R.; Fiorentino, A. J.; Greene, W.

1976-01-01

A Pollution Reduction Technology Program to develop and demonstrate the combustor technology necessary to reduce exhaust emissions for aircraft engines using can-annular combustors is described. The program consisted of design, fabrication, experimental rig testing and assessment of results and was conducted in three program elements. The combustor configurations of each program element represented increasing potential for meeting the 1979 Environmental Protection Agency (EPA) emission standards, while also representing increasing complexity and difficulty of development and adaptation to an operational engine. Experimental test rig results indicate that significant reductions were made to the emission levels of the baseline JT8D-17 combustor by concepts in all three program elements. One of the Element I single-stage combustors reduced carbon monoxide to a level near, and total unburned hydrocarbons (THC) and smoke to levels below the 1979 EPA standards with little or no improvement in oxides of nitrogen. The Element II two-stage advanced Vorbix (vortex burning and mixing) concept met the standard for THC and achieved significant reductions in CO and NOx relative to the baseline. Although the Element III prevaporized-premixed concept reduced high power NOx below the Element II results, there was no improvement to the integrated EPA parameter relative to the Vorbix combustor.

Milestones: Critical Elements in Clinical Informatics Fellowship Programs

PubMed Central

Lehmann, Christoph U.; Munger, Benson

2016-01-01

Summary Background Milestones refer to points along a continuum of a competency from novice to expert. Resident and fellow assessment and program evaluation processes adopted by the ACGME include the mandate that programs report the educational progress of residents and fellows twice annually utilizing Milestones developed by a specialty specific ACGME working group of experts. Milestones in clinical training programs are largely unmapped to specific assessment tools. Residents and fellows are mainly assessed using locally derived assessment instruments. These assessments are then reviewed by the Clinical Competency Committee which assigns and reports trainee ratings using the specialty specific reporting Milestones. Methods and Results The challenge and opportunity facing the nascent specialty of Clinical Informatics is how to optimally utilize this framework across a growing number of accredited fellowships. The authors review how a mapped milestone framework, in which each required sub-competency is mapped to a single milestone assessment grid, can enable the use of milestones for multiple uses including individualized learning plans, fellow assessments, and program evaluation. Furthermore, such a mapped strategy will foster the ability to compare fellow progress within and between Clinical Informatics Fellowships in a structured and reliable fashion. Clinical Informatics currently has far less variability across programs and thus could easily utilize a more tightly defined set of milestones with a clear mapping to sub-competencies. This approach would enable greater standardization of assessment instruments and processes across programs while allowing for variability in how those sub-competencies are taught. Conclusions A mapped strategy for Milestones offers significant advantages for Clinical Informatics programs. PMID:27081414

Inlets, ducts, and nozzles

NASA Technical Reports Server (NTRS)

Abbott, John M.; Anderson, Bernhard H.; Rice, Edward J.

1990-01-01

The internal fluid mechanics research program in inlets, ducts, and nozzles consists of a balanced effort between the development of computational tools (both parabolized Navier-Stokes and full Navier-Stokes) and the conduct of experimental research. The experiments are designed to better understand the fluid flow physics, to develop new or improved flow models, and to provide benchmark quality data sets for validation of the computational methods. The inlet, duct, and nozzle research program is described according to three major classifications of flow phenomena: (1) highly 3-D flow fields; (2) shock-boundary-layer interactions; and (3) shear layer control. Specific examples of current and future elements of the research program are described for each of these phenomenon. In particular, the highly 3-D flow field phenomenon is highlighted by describing the computational and experimental research program in transition ducts having a round-to-rectangular area variation. In the case of shock-boundary-layer interactions, the specific details of research for normal shock-boundary-layer interactions are described. For shear layer control, research in vortex generators and the use of aerodynamic excitation for enhancement of the jet mixing process are described.

Human Research Program Human Health Countermeasures Element Nutrition Risk Standing Review Panel

NASA Technical Reports Server (NTRS)

Bistrian, Bruce

2009-01-01

The Nutrition Risk Standing Review Panel (SRP) reviewed and discussed the specific gaps and tasks for the Human Health Countermeasures (HHC) Element related to nutrition identified in the Human Research Program (HRP) Integrated Research Plan. There was general consensus that the described gaps and proposed tasks were critical to future NASA mission success. The SRP acknowledged the high scientific quality of the work currently being undertaken by the Nutritional Biochemistry group under the direction of Dr. Scott Smith. In review of the entire HRP, four new gaps were identified that complement the Element's existing research activities. Given the limitations of ground-based analogs for many of the unique physiological and metabolic alterations in space, future studies are needed to quantify nutritional factors that change during actual space flight. In addition, future tasks should seek to better evaluate the time course of physiological and metabolic alterations during flight to better predict alterations during longer duration missions. Finally, given the recent data suggesting a potential role for increased inflammatory responses during space flight, the role of inflammation needs to be explored in detail, including the development of potential countermeasures and new ground based analogs, if this possibility is confirmed.

Application of NASTRAN for stress analysis of left ventricle of the heart

NASA Technical Reports Server (NTRS)

Pao, Y. C.; Ritman, E. L.; Wang, H. C.

1975-01-01

Knowing the stress and strain distributions in the left ventricular wall of the heart is a prerequisite for the determination of the muscle elasticity and contractility in the process of assessing the functional status of the heart. NASTRAN was applied for the calculation of these stresses and strains and to help in verifying the results obtained by the computer program FEAMPS which was specifically designed for the plane-strain finite-element analysis of the left ventricular cross sections. Adopted for the analysis are the true shape and dimensions of the cross sections reconstructed from multiplanar X-ray views of a left ventricle which was surgically isolated from a dog's heart but metabolically supported to sustain its beating. A preprocessor was prepared to accommodate both FEAMPS and NASTRAN, and it has also facilitated the application of both the triangular element and isoparameteric quadrilateral element versions of NASTRAN. The stresses in several crucial regions of the left ventricular wall calculated by these two independently developed computer programs are found to be in good agreement. Such confirmation of the results is essential in the development of a method which assesses the heart performance.

Program Helps Generate Boundary-Element Mathematical Models

NASA Technical Reports Server (NTRS)

Goldberg, R. K.

1995-01-01

Composite Model Generation-Boundary Element Method (COM-GEN-BEM) computer program significantly reduces time and effort needed to construct boundary-element mathematical models of continuous-fiber composite materials at micro-mechanical (constituent) scale. Generates boundary-element models compatible with BEST-CMS boundary-element code for anlaysis of micromechanics of composite material. Written in PATRAN Command Language (PCL).

Data Element Dictionary: Finance. A Technical Report Concerning Finance Related Data Elements in the WICHE Management Information Systems Program. First Edition.

ERIC Educational Resources Information Center

Thomas, Charles R.

This document is one of the 5 sections of the Data Element Dictionary developed as part of the WICHE Management Information Systems (MIS) Program. The elements in this section apply to both the current and historical data concerning finance. The purpose of the WICHE MIS Program is to make it possible to derive data which will be truly comparable…

STARS: A general-purpose finite element computer program for analysis of engineering structures

NASA Technical Reports Server (NTRS)

Gupta, K. K.

1984-01-01

STARS (Structural Analysis Routines) is primarily an interactive, graphics-oriented, finite-element computer program for analyzing the static, stability, free vibration, and dynamic responses of damped and undamped structures, including rotating systems. The element library consists of one-dimensional (1-D) line elements, two-dimensional (2-D) triangular and quadrilateral shell elements, and three-dimensional (3-D) tetrahedral and hexahedral solid elements. These elements enable the solution of structural problems that include truss, beam, space frame, plane, plate, shell, and solid structures, or any combination thereof. Zero, finite, and interdependent deflection boundary conditions can be implemented by the program. The associated dynamic response analysis capability provides for initial deformation and velocity inputs, whereas the transient excitation may be either forces or accelerations. An effective in-core or out-of-core solution strategy is automatically employed by the program, depending on the size of the problem. Data input may be at random within a data set, and the program offers certain automatic data-generation features. Input data are formatted as an optimal combination of free and fixed formats. Interactive graphics capabilities enable convenient display of nodal deformations, mode shapes, and element stresses.

[An Integrative Review of Home Care Service for Pregnant Women, Mothers, Infants, and Toddlers in Vulnerable Group].

PubMed

Kim, Dasom; Lee, Insook

2017-10-01

This study was intended to integrate the evidence of home care service intervention for mothers and children in vulnerable groups through an integrative literature review. We searched the MEDLINE (PubMED), EMBASE, Cochrane Central Register of Controlled Trials, CINAHL, DBpia databases. The quality of the articles was assessed by one doctoral researcher and verified by one professor of community health nursing who had participated in the systematic review of literature. A framework was developed to identify the intervention patterns in the selected papers and categorize various elements. The extracted intervention elements were grouped into potential themes, which were verified by assessors on whether they clearly reflected the interventions in the papers. Among 878 searched papers, we selected 16 papers after excluding literature that does not satisfy the selection criteria and quality evaluation. The intervention elements of 16 selected papers were categorized into six themes. The extracted intervention elements were divided into the themes of Patient-specific/Situation-specific care planning and intervention, Emphasis on self care competency, Intense home visit by developmental milestone, Reinforcing and modeling mother-child attachment, Communication and interaction across the intervention, Linkage with community resource and multidisciplinary approach. As a result of the analysis of proper interventions of home care services for mothers and children in vulnerable groups, it was found that it is necessary to consider indispensable intervention elements that can standardize the quality of home care services, and conduct studies on developing intervention programs based on the elements. © 2017 Korean Society of Nursing Science

42 CFR 431.810 - Basic elements of the Medicaid eligibility quality control (MEQC) program.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 4 2011-10-01 2011-10-01 false Basic elements of the Medicaid eligibility quality control (MEQC) program. 431.810 Section 431.810 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... elements of the Medicaid eligibility quality control (MEQC) program. (a) General requirements. The agency...

Elimination sequence optimization for SPAR

NASA Technical Reports Server (NTRS)

Hogan, Harry A.

1986-01-01

SPAR is a large-scale computer program for finite element structural analysis. The program allows user specification of the order in which the joints of a structure are to be eliminated since this order can have significant influence over solution performance, in terms of both storage requirements and computer time. An efficient elimination sequence can improve performance by over 50% for some problems. Obtaining such sequences, however, requires the expertise of an experienced user and can take hours of tedious effort to affect. Thus, an automatic elimination sequence optimizer would enhance productivity by reducing the analysts' problem definition time and by lowering computer costs. Two possible methods for automating the elimination sequence specifications were examined. Several algorithms based on the graph theory representations of sparse matrices were studied with mixed results. Significant improvement in the program performance was achieved, but sequencing by an experienced user still yields substantially better results. The initial results provide encouraging evidence that the potential benefits of such an automatic sequencer would be well worth the effort.

36 CFR 230.35 - FLEP elements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false FLEP elements. 230.35 Section... FORESTRY ASSISTANCE Forest Land Enhancement Program § 230.35 FLEP elements. (a) States may use FLEP funds... through the following elements: (1) Development and implementation of educational programs; (2) Resource...

36 CFR 230.35 - FLEP elements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false FLEP elements. 230.35 Section... FORESTRY ASSISTANCE Forest Land Enhancement Program § 230.35 FLEP elements. (a) States may use FLEP funds... through the following elements: (1) Development and implementation of educational programs; (2) Resource...

36 CFR 230.35 - FLEP elements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false FLEP elements. 230.35 Section... FORESTRY ASSISTANCE Forest Land Enhancement Program § 230.35 FLEP elements. (a) States may use FLEP funds... through the following elements: (1) Development and implementation of educational programs; (2) Resource...

36 CFR 230.35 - FLEP elements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false FLEP elements. 230.35 Section... FORESTRY ASSISTANCE Forest Land Enhancement Program § 230.35 FLEP elements. (a) States may use FLEP funds... through the following elements: (1) Development and implementation of educational programs; (2) Resource...

36 CFR 230.35 - FLEP elements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false FLEP elements. 230.35 Section... FORESTRY ASSISTANCE Forest Land Enhancement Program § 230.35 FLEP elements. (a) States may use FLEP funds... through the following elements: (1) Development and implementation of educational programs; (2) Resource...

Building HVAC control knowledge data schema – Towards a unified representation of control system knowledge

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Yan; Treado, Stephen J.; Messner, John I.

Building control systems for Heating, Ventilation, and Air Conditioning (HVAC) play a key role in realizing the functionality and operation of building systems and components. Building Control Knowledge (BCK) is the logic and algorithms embedded throughout building control system. There are different methods to represent the BCK. These methods differ in the selection of BCK representing elements and the format of those elements. There is a lack of standard data schema, for storing, retrieving, and reusing structured BCK. In this study, a modular data schema is created for BCK representation. The data schema contains eleven representing elements, i.e., control modulemore » name, operation mode, system schematic, control flow diagram, data point, alarm, parameter, control sequence, function, and programming code. Each element is defined with specific attributes. This data schema is evaluated through a case study demonstration. The demonstration shows a new way to represent the BCK with standard formats.« less

Application of powder metallurgy techniques to produce improved bearing elements for liquid rocket engines

NASA Technical Reports Server (NTRS)

Moracz, D. J.; Shipley, R. J.; Moxson, V. S.; Killman, R. J.; Munson, H. E.

1992-01-01

The objective was to apply powder metallurgy techniques for the production of improved bearing elements, specifically balls and races, for advanced cryogenic turbopump bearings. The materials and fabrication techniques evaluated were judged on the basis of their ability to improve fatigue life, wear resistance, and corrosion resistance of Space Shuttle Main Engine (SSME) propellant bearings over the currently used 440C. An extensive list of candidate bearing alloys in five different categories was considered: tool/die steels, through hardened stainless steels, cobalt-base alloys, and gear steels. Testing of alloys for final consideration included hardness, rolling contact fatigue, cross cylinder wear, elevated temperature wear, room and cryogenic fracture toughness, stress corrosion cracking, and five-ball (rolling-sliding element) testing. Results of the program indicated two alloys that showed promise for improved bearing elements. These alloys were MRC-2001 and X-405. 57mm bearings were fabricated from the MRC-2001 alloy for further actual hardware rig testing by NASA-MSFC.

Enhanced capture of elemental mercury by bamboo-based sorbents.

PubMed

Tan, Zengqiang; Xiang, Jun; Su, Sheng; Zeng, Hancai; Zhou, Changsong; Sun, Lushi; Hu, Song; Qiu, Jianrong

2012-11-15

To develop cost-effective sorbent for gas-phase elemental mercury removal, the bamboo charcoal (BC) produced from renewable bamboo and KI modified BC (BC-I) were used for elemental mercury removal. The effect of NO, SO2 on gas-phase Hg0 adsorption by KI modified BC was evaluated on a fixed bed reactor using an online mercury analyzer. BET surface area analysis, temperature programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS) were used to determine the pore structure and surface chemistry of the sorbents. The results show that KI impregnation reduced the sorbents' BET surface area and total pore volume compared with that of the original BC. But the BC-I has excellent adsorption capacity for elemental mercury at a relatively higher temperature of 140 °C and 180 °C. The presence of NO or SO2 could inhibit Hg0 capture, but BC-I has strong anti-poisoning ability. The specific reaction mechanism has been further analyzed. Copyright © 2012 Elsevier B.V. All rights reserved.

Common Processes in Evidence-Based Adolescent HIV Prevention Programs

PubMed Central

Ingram, Barbara L.; Flannery, Diane; Elkavich, Amy

2014-01-01

Dissemination of evidence-based HIV prevention programs for adolescents will be increased if community interventionists are able to distinguish core, essential program elements from optional, discretionary ones. We selected five successful adolescent HIV prevention programs, used a qualitative coding method to identify common processes described in the procedural manuals, and then compared the programs. Nineteen common processes were categorized as structural features, group management strategies, competence building, and addressing developmental challenges of adolescence. All programs shared the same structural features (goal-setting and session agendas), used an active engagement style of group management, and built cognitive competence. Programs varied in attention to developmental challenges, emphasis on behavioral and emotional competence, and group management methods. This qualitative analysis demonstrated that successful HIV programs contain processes not articulated in their developers’ theoretical models. By moving from the concrete specifics of branded interventions to identification of core, common processes, we are consistent with the progress of “common factors” research in psychotherapy. PMID:18330687

Formalizing Knowledge in Multi-Scale Agent-Based Simulations

PubMed Central

Somogyi, Endre; Sluka, James P.; Glazier, James A.

2017-01-01

Multi-scale, agent-based simulations of cellular and tissue biology are increasingly common. These simulations combine and integrate a range of components from different domains. Simulations continuously create, destroy and reorganize constituent elements causing their interactions to dynamically change. For example, the multi-cellular tissue development process coordinates molecular, cellular and tissue scale objects with biochemical, biomechanical, spatial and behavioral processes to form a dynamic network. Different domain specific languages can describe these components in isolation, but cannot describe their interactions. No current programming language is designed to represent in human readable and reusable form the domain specific knowledge contained in these components and interactions. We present a new hybrid programming language paradigm that naturally expresses the complex multi-scale objects and dynamic interactions in a unified way and allows domain knowledge to be captured, searched, formalized, extracted and reused. PMID:29338063

Formalizing Knowledge in Multi-Scale Agent-Based Simulations.

PubMed

Somogyi, Endre; Sluka, James P; Glazier, James A

2016-10-01

Multi-scale, agent-based simulations of cellular and tissue biology are increasingly common. These simulations combine and integrate a range of components from different domains. Simulations continuously create, destroy and reorganize constituent elements causing their interactions to dynamically change. For example, the multi-cellular tissue development process coordinates molecular, cellular and tissue scale objects with biochemical, biomechanical, spatial and behavioral processes to form a dynamic network. Different domain specific languages can describe these components in isolation, but cannot describe their interactions. No current programming language is designed to represent in human readable and reusable form the domain specific knowledge contained in these components and interactions. We present a new hybrid programming language paradigm that naturally expresses the complex multi-scale objects and dynamic interactions in a unified way and allows domain knowledge to be captured, searched, formalized, extracted and reused.

Potential use of geothermal resources in the Snake River Basin: an environmental overview. Volume II. Annotated bibliography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spencer, S.G.; Russell, B.F.; Sullivan, J.F.

This volume is a partially annotated bibliography of reference materials pertaining to the seven KGRA's. The bibliography is divided into sections by program element as follows: terrestrial ecology, aquatic ecology, heritage resources, socioeconomics and demography, geology, geothermal, soils, hydrology and water quality, seismicity, and subsidence. Cross-referencing is available for those references which are applicable to specific KGRA's. (MHR)

Sustainable Range Management of RDX and TNT by Phytoremediation with Engineered Plants

DTIC Science & Technology

2016-04-01

FINAL REPORT Sustainable Range Management of RDX and TNT by Phytoremediation with Engineered Plants SERDP Project ER-1498 APRIL 2016...specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its...by Phyoremediation with Engineered Plants 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER ER-1498 Neil C

Using Object-Oriented Databases for Implementation of Interactive Electronic Technical Manuals

DTIC Science & Technology

1992-03-01

analytical process applied throughout the system acquisition program in order to define supportability related design factors and to ensure development of a...Node Alternatives Node Alternatives (NODEALTS) is a list of mutually exclusive nodes, grouped together by the fact that they apply to different...contextual situations. The content specific layer NODEALTS element is a reference to a set of nodes that might apply in different situations. No hierarchy

Malaria Prevention by New Technology: Vectored Delivery of Antibody Genes

DTIC Science & Technology

2017-10-01

AWARD NUMBER: W81XWH-15-1-0401 TITLE: Malaria Prevention by New Technology : Vectored Delivery of Antibody Genes PRINCIPAL INVESTIGATOR: Gary...CONTRACT NUMBER Malaria Prevention by New Technology : Vectored Delivery of Antibody Genes 5b. GRANT NUMBER W81XWH-15-1-0401 5c. PROGRAM ELEMENT...whole animals. Using a specific technology originally applied to expression of HIV antibodies, we demonstrated that mice can be protected from

The Efficacy of a Universal School-Based Prevention Program for Eating Disorders among German Adolescents: Results from a Randomized-Controlled Trial.

PubMed

Warschburger, Petra; Zitzmann, Jana

2018-06-01

Disordered eating is highly prevalent during adolescence and has a detrimental effect on further development. Effective prevention programs are needed to prevent unhealthy developmental trajectories. This study evaluated the efficacy of the POPS-program (POtsdam Prevention at Schools), a universal school-based eating disorder prevention program for adolescents. In a cluster-randomized design, we compared the intervention group receiving the prevention program to a waiting control group. Outcomes included indicators of disordered eating and relevant risk factors for eating disorders (body dissatisfaction, internalization of the thin ideal, perceived media pressure, perfectionism, emotional element of exercise, social comparison, and perceived teasing). Questionnaires were administered at the start of the intervention, 3 and 12 months post intervention. At baseline, 1112 adolescents aged 10 to 16 years participated (49% girls; 51% intervention group). Intention-to-treat analyses with the complete data set and per-protocol analyses as a completer analysis were performed. The intervention group showed a more favorable course compared to the control group regarding all observed risk factors for eating disorders except for perceived teasing. Effect sizes were small but comparable to other primary prevention programs. At 1-year follow-up, a small but significant effect on disordered eating was observed. Results of the per-protocol analyses were mostly confirmed by the intention-to-treat analyses. Results were promising for both genders although girls benefited more regarding disordered eating and internalization of the thin ideal. Further studies are warranted examining successful program elements and whether gender-specific programs are needed.

Conserved roles of mouse DUX and human DUX4 in activating cleavage-stage genes and MERVL/HERVL retrotransposons.

PubMed

Hendrickson, Peter G; Doráis, Jessie A; Grow, Edward J; Whiddon, Jennifer L; Lim, Jong-Won; Wike, Candice L; Weaver, Bradley D; Pflueger, Christian; Emery, Benjamin R; Wilcox, Aaron L; Nix, David A; Peterson, C Matthew; Tapscott, Stephen J; Carrell, Douglas T; Cairns, Bradley R

2017-06-01

To better understand transcriptional regulation during human oogenesis and preimplantation development, we defined stage-specific transcription, which highlighted the cleavage stage as being highly distinctive. Here, we present multiple lines of evidence that a eutherian-specific multicopy retrogene, DUX4, encodes a transcription factor that activates hundreds of endogenous genes (for example, ZSCAN4, KDM4E and PRAMEF-family genes) and retroviral elements (MERVL/HERVL family) that define the cleavage-specific transcriptional programs in humans and mice. Remarkably, mouse Dux expression is both necessary and sufficient to convert mouse embryonic stem cells (mESCs) into 2-cell-embryo-like ('2C-like') cells, measured here by the reactivation of '2C' genes and repeat elements, the loss of POU5F1 (also known as OCT4) protein and chromocenters, and the conversion of the chromatin landscape (as assessed by transposase-accessible chromatin using sequencing (ATAC-seq)) to a state strongly resembling that of mouse 2C embryos. Thus, we propose mouse DUX and human DUX4 as major drivers of the cleavage or 2C state.

Database Comparison of the Adult-to-Adult Living Donor Liver Transplantation Cohort Study (A2ALL) and the SRTR U.S. Transplant Registry1,2,3

PubMed Central

Gillespie, BW; Merion, RM; Ortiz-Rios, E; Tong, L; Shaked, A; Brown, RS; Ojo, AO; Hayashi, PH; Berg, CL; Abecassis, MM; Ashworth, AS; Friese, CE; Hong, JC; Trotter, JF; Everhart, JE

2010-01-01

Data submitted by transplant programs to the Organ Procurement and Transplantation Network (OPTN) are used by the Scientific Registry of Transplant Recipients (SRTR) for policy development, performance evaluation, and research. This study compared OPTN/SRTR data with data extracted from medical records by research coordinators from the nine-center A2ALL study. A2ALL data were collected independently of OPTN data submission (48 data elements among 785 liver transplant candidates/recipients; 12 data elements among 386 donors). At least 90% agreement occurred between OPTN/SRTR and A2ALL for 11/29 baseline recipient elements, 4/19 recipient transplant or follow-up elements, and 6/12 donor elements. For the remaining recipient and donor elements, >10% of values were missing in OPTN/SRTR but present in A2ALL, confirming that missing data were largely avoidable. Other than variables required for allocation, the percentage missing varied widely by center. These findings support an expanded focus on data quality control by OPTN/SRTR for a broader variable set than those used for allocation. Center-specific monitoring of missing values could substantially improve the data. PMID:20199501

Static and dynamic structural-sensitivity derivative calculations in the finite-element-based Engineering Analysis Language (EAL) system

NASA Technical Reports Server (NTRS)

Camarda, C. J.; Adelman, H. M.

1984-01-01

The implementation of static and dynamic structural-sensitivity derivative calculations in a general purpose, finite-element computer program denoted the Engineering Analysis Language (EAL) System is described. Derivatives are calculated with respect to structural parameters, specifically, member sectional properties including thicknesses, cross-sectional areas, and moments of inertia. Derivatives are obtained for displacements, stresses, vibration frequencies and mode shapes, and buckling loads and mode shapes. Three methods for calculating derivatives are implemented (analytical, semianalytical, and finite differences), and comparisons of computer time and accuracy are made. Results are presented for four examples: a swept wing, a box beam, a stiffened cylinder with a cutout, and a space radiometer-antenna truss.

VIBA-Lab 3.0: Computer program for simulation and semi-quantitative analysis of PIXE and RBS spectra and 2D elemental maps

NASA Astrophysics Data System (ADS)

Orlić, Ivica; Mekterović, Darko; Mekterović, Igor; Ivošević, Tatjana

2015-11-01

VIBA-Lab is a computer program originally developed by the author and co-workers at the National University of Singapore (NUS) as an interactive software package for simulation of Particle Induced X-ray Emission and Rutherford Backscattering Spectra. The original program is redeveloped to a VIBA-Lab 3.0 in which the user can perform semi-quantitative analysis by comparing simulated and measured spectra as well as simulate 2D elemental maps for a given 3D sample composition. The latest version has a new and more versatile user interface. It also has the latest data set of fundamental parameters such as Coster-Kronig transition rates, fluorescence yields, mass absorption coefficients and ionization cross sections for K and L lines in a wider energy range than the original program. Our short-term plan is to introduce routine for quantitative analysis for multiple PIXE and XRF excitations. VIBA-Lab is an excellent teaching tool for students and researchers in using PIXE and RBS techniques. At the same time the program helps when planning an experiment and when optimizing experimental parameters such as incident ions, their energy, detector specifications, filters, geometry, etc. By "running" a virtual experiment the user can test various scenarios until the optimal PIXE and BS spectra are obtained and in this way save a lot of expensive machine time.

Quality Assurance Program for Molecular Medicine Laboratories

PubMed Central

Hajia, M; Safadel, N; Samiee, S Mirab; Dahim, P; Anjarani, S; Nafisi, N; Sohrabi, A; Rafiee, M; Sabzavi, F; Entekhabi, B

2013-01-01

Background: Molecular diagnostic methods have played and continuing to have a critical role in clinical laboratories in recent years. Therefore, standardization is an evolutionary process that needs to be upgrade with increasing scientific knowledge, improvement of the instruments and techniques. The aim of this study was to design a quality assurance program in order to have similar conditions for all medical laboratories engaging with molecular tests. Methods: We had to design a plan for all four elements; required space conditions, equipments, training, and basic guidelines. Necessary guidelines was prepared and confirmed by the launched specific committee at the Health Reference Laboratory. Results: Several workshops were also held for medical laboratories directors and staffs, quality control manager of molecular companies, directors and nominees from universities. Accreditation of equipments and molecular material was followed parallel with rest of program. Now we are going to accredit medical laboratories and to evaluate the success of the program. Conclusion: Accreditation of medical laboratory will be succeeding if its basic elements are provided in advance. Professional practice guidelines, holding training and performing accreditation the molecular materials and equipments ensured us that laboratories are aware of best practices, proper interpretation, limitations of techniques, and technical issues. Now, active external auditing can improve the applied laboratory conditions toward the defined standard level. PMID:23865028

Quality assurance program for molecular medicine laboratories.

PubMed

Hajia, M; Safadel, N; Samiee, S Mirab; Dahim, P; Anjarani, S; Nafisi, N; Sohrabi, A; Rafiee, M; Sabzavi, F; Entekhabi, B

2013-01-01

Molecular diagnostic methods have played and continuing to have a critical role in clinical laboratories in recent years. Therefore, standardization is an evolutionary process that needs to be upgrade with increasing scientific knowledge, improvement of the instruments and techniques. The aim of this study was to design a quality assurance program in order to have similar conditions for all medical laboratories engaging with molecular tests. We had to design a plan for all four elements; required space conditions, equipments, training, and basic guidelines. Necessary guidelines was prepared and confirmed by the launched specific committee at the Health Reference Laboratory. Several workshops were also held for medical laboratories directors and staffs, quality control manager of molecular companies, directors and nominees from universities. Accreditation of equipments and molecular material was followed parallel with rest of program. Now we are going to accredit medical laboratories and to evaluate the success of the program. Accreditation of medical laboratory will be succeeding if its basic elements are provided in advance. Professional practice guidelines, holding training and performing accreditation the molecular materials and equipments ensured us that laboratories are aware of best practices, proper interpretation, limitations of techniques, and technical issues. Now, active external auditing can improve the applied laboratory conditions toward the defined standard level.

Advanced Food Technology Workshop Report. Volumes 1 and 2

NASA Technical Reports Server (NTRS)

Perchonok, Michele

2003-01-01

The Advanced Human Support Technology (AHST) Program conducts research and technology development to provide new technologies and next-generation system that will enable humans to live and work safely and effectively in space. One program element within the AHST Program is Advanced Life Support (ALS). The goal of the ALS program element is to develop regenerative life support systems directed at supporting National Aeronautics and Space Administration's (NASA) future long-duration missions. Such missions could last from months to years and make resupply impractical, thereby necessitating self-sufficiency. Thus, subsystems must be developed to fully recycle air and water, recover resources from solid wastes grow plants, process raw plant products into nutritious and palatable foods, control the thermal environment, while reducing the overall system mass. ALS systems will be a combination of physico-chemical and biological components depending on the specific mission requirements. In the transit vehicle, the food system will primarily be a prepackaged food system with the possible addition of salad crops that can be picked and eaten with limited preparation. On the lunar or planetary evolved base, the food system will be a combination of the prepackaged menu item and ingredients that are processed from the grown crops. Food processing and food preparation will be part of this food system.

Plane stress analysis of wood members using isoparametric finite elements, a computer program

Treesearch

Gary D. Gerhardt

1983-01-01

A finite element program is presented which computes displacements, strains, and stresses in wood members of arbitrary shape which are subjected to plane strain/stressloading conditions. This report extends a program developed by R. L. Taylor in 1977, by adding both the cubic isoparametric finite element and the capability to analyze nonisotropic materials. The...

CAD/CAM approach to improving industry productivity gathers momentum

NASA Technical Reports Server (NTRS)

Fulton, R. E.

1982-01-01

Recent results and planning for the NASA/industry Integrated Programs for Aerospace-Vehicle Design (IPAD) program for improving productivity with CAD/CAM methods are outlined. The industrial group work is being mainly done by Boeing, and progress has been made in defining the designer work environment, developing requirements and a preliminary design for a future CAD/CAM system, and developing CAD/CAM technology. The work environment was defined by conducting a detailed study of a reference design process, and key software elements for a CAD/CAM system have been defined, specifically for interactive design or experiment control processes. Further work is proceeding on executive, data management, geometry and graphics, and general utility software, and dynamic aspects of the programs being developed are outlined

The 1995 NASA High-Speed Research Program Sonic Boom Workshop. Volume 1

NASA Technical Reports Server (NTRS)

Baize, Daniel G. (Editor)

1996-01-01

The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Sonic Boom Workshop on September 12-13, 1995. The workshop was designed to bring together NASAs scientists and engineers and their counterparts in industry, other Government agencies, and academia working together in the sonic boom element of NASAs High-Speed Research Program. Specific objectives of this workshop were to (1) report the progress and status of research in sonic boom propagation, acceptability, and design; (2) promote and disseminate this technology within the appropriate technical communities; (3) help promote synergy among the scientists working in the Program; and (4) identify technology pacing the development of viable reduced-boom High-Speed Civil Transport concepts. The Workshop included these sessions: Session 1 - Sonic Boom Propagation (Theoretical); Session 2 - Sonic Boom Propagation (Experimental); and Session 3 - Acceptability Studies - Human and Animal.

Program (systems) engineering

NASA Technical Reports Server (NTRS)

Baroff, Lynn E.; Easter, Robert W.; Pomphrey, Richard B.

2004-01-01

Program Systems Engineering applies the principles of Systems Engineering at the program level. Space programs are composed of interrelated elements which can include collections of projects, advanced technologies, information systems, etc. Some program elements are outside traditional engineering's physical systems, such as education and public outreach, public relations, resource flow, and interactions within the political environments.

Multiprocessor architecture: Synthesis and evaluation

NASA Technical Reports Server (NTRS)

Standley, Hilda M.

1990-01-01

Multiprocessor computed architecture evaluation for structural computations is the focus of the research effort described. Results obtained are expected to lead to more efficient use of existing architectures and to suggest designs for new, application specific, architectures. The brief descriptions given outline a number of related efforts directed toward this purpose. The difficulty is analyzing an existing architecture or in designing a new computer architecture lies in the fact that the performance of a particular architecture, within the context of a given application, is determined by a number of factors. These include, but are not limited to, the efficiency of the computation algorithm, the programming language and support environment, the quality of the program written in the programming language, the multiplicity of the processing elements, the characteristics of the individual processing elements, the interconnection network connecting processors and non-local memories, and the shared memory organization covering the spectrum from no shared memory (all local memory) to one global access memory. These performance determiners may be loosely classified as being software or hardware related. This distinction is not clear or even appropriate in many cases. The effect of the choice of algorithm is ignored by assuming that the algorithm is specified as given. Effort directed toward the removal of the effect of the programming language and program resulted in the design of a high-level parallel programming language. Two characteristics of the fundamental structure of the architecture (memory organization and interconnection network) are examined.

Charter for Systems Engineer Working Group

NASA Technical Reports Server (NTRS)

Suffredini, Michael T.; Grissom, Larry

2015-01-01

This charter establishes the International Space Station Program (ISSP) Mobile Servicing System (MSS) Systems Engineering Working Group (SEWG). The MSS SEWG is established to provide a mechanism for Systems Engineering for the end-to-end MSS function. The MSS end-to-end function includes the Space Station Remote Manipulator System (SSRMS), the Mobile Remote Servicer (MRS) Base System (MBS), Robotic Work Station (RWS), Special Purpose Dexterous Manipulator (SPDM), Video Signal Converters (VSC), and Operations Control Software (OCS), the Mobile Transporter (MT), and by interfaces between and among these elements, and United States On-Orbit Segment (USOS) distributed systems, and other International Space Station Elements and Payloads, (including the Power Data Grapple Fixtures (PDGFs), MSS Capture Attach System (MCAS) and the Mobile Transporter Capture Latch (MTCL)). This end-to-end function will be supported by the ISS and MSS ground segment facilities. This charter defines the scope and limits of the program authority and document control that is delegated to the SEWG and it also identifies the panel core membership and specific operating policies.

Recent progress in NASA Langley Research Center textile reinforced composites program

NASA Technical Reports Server (NTRS)

Dexter, H. Benson; Harris, Charles E.; Johnston, Norman J.

1992-01-01

Research was conducted to explore the benefits of textile reinforced composites for transport aircraft primary structures. The objective is to develop and demonstrate the potential of affordable textile reinforced composite materials to meet design properties and damage tolerance requirements of advanced aircraft structural concepts. Some program elements include development of textile preforms, processing science, mechanics of materials, experimental characterization of materials, and development and evaluation of textile reinforced composite structural elements and subcomponents. Textile 3-D weaving, 3-D braiding, and knitting and/or stitching are being compared with conventional laminated tape processes for improved damage tolerance. Through-the-thickness reinforcements offer significant damage tolerance improvements. However, these gains must be weighted against potential loss in in-plane properties such as strength and stiffness. Analytical trade studies are underway to establish design guidelines for the application of textile material forms to meet specific loading requirements. Fabrication and testing of large structural parts are required to establish the potential of textile reinforced composite materials.

A Flexible Method for Producing F.E.M. Analysis of Bone Using Open-Source Software

NASA Technical Reports Server (NTRS)

Boppana, Abhishektha; Sefcik, Ryan; Meyers, Jerry G.; Lewandowski, Beth E.

2016-01-01

This project, performed in support of the NASA GRC Space Academy summer program, sought to develop an open-source workflow methodology that segmented medical image data, created a 3D model from the segmented data, and prepared the model for finite-element analysis. In an initial step, a technological survey evaluated the performance of various existing open-source software that claim to perform these tasks. However, the survey concluded that no single software exhibited the wide array of functionality required for the potential NASA application in the area of bone, muscle and bio fluidic studies. As a result, development of a series of Python scripts provided the bridging mechanism to address the shortcomings of the available open source tools. The implementation of the VTK library provided the most quick and effective means of segmenting regions of interest from the medical images; it allowed for the export of a 3D model by using the marching cubes algorithm to build a surface mesh. To facilitate the development of the model domain from this extracted information required a surface mesh to be processed in the open-source software packages Blender and Gmsh. The Preview program of the FEBio suite proved to be sufficient for volume filling the model with an unstructured mesh and preparing boundaries specifications for finite element analysis. To fully allow FEM modeling, an in house developed Python script allowed assignment of material properties on an element by element basis by performing a weighted interpolation of voxel intensity of the parent medical image correlated to published information of image intensity to material properties, such as ash density. A graphical user interface combined the Python scripts and other software into a user friendly interface. The work using Python scripts provides a potential alternative to expensive commercial software and inadequate, limited open-source freeware programs for the creation of 3D computational models. More work will be needed to validate this approach in creating finite-element models.

Voluntary medical male circumcision: a qualitative study exploring the challenges of costing demand creation in eastern and southern Africa.

PubMed

Bertrand, Jane T; Njeuhmeli, Emmanuel; Forsythe, Steven; Mattison, Sarah K; Mahler, Hally; Hankins, Catherine A

2011-01-01

This paper proposes an approach to estimating the costs of demand creation for voluntary medical male circumcision (VMMC) scale-up in 13 countries of eastern and southern Africa. It addresses two key questions: (1) what are the elements of a standardized package for demand creation? And (2) what challenges exist and must be taken into account in estimating the costs of demand creation? We conducted a key informant study on VMMC demand creation using purposive sampling to recruit seven people who provide technical assistance to government programs and manage budgets for VMMC demand creation. Key informants provided their views on the important elements of VMMC demand creation and the most effective funding allocations across different types of communication approaches (e.g., mass media, small media, outreach/mobilization). The key finding was the wide range of views, suggesting that a standard package of core demand creation elements would not be universally applicable. This underscored the importance of tailoring demand creation strategies and estimates to specific country contexts before estimating costs. The key informant interviews, supplemented by the researchers' field experience, identified these issues to be addressed in future costing exercises: variations in the cost of VMMC demand creation activities by country and program, decisions about the quality and comprehensiveness of programming, and lack of data on critical elements needed to "trigger the decision" among eligible men. Based on this study's findings, we propose a seven-step methodological approach to estimate the cost of VMMC scale-up in a priority country, based on our key assumptions. However, further work is needed to better understand core components of a demand creation package and how to cost them. Notwithstanding the methodological challenges, estimating the cost of demand creation remains an essential element in deriving estimates of the total costs for VMMC scale-up in eastern and southern Africa.

Voluntary Medical Male Circumcision: A Qualitative Study Exploring the Challenges of Costing Demand Creation in Eastern and Southern Africa

PubMed Central

Bertrand, Jane T.; Njeuhmeli, Emmanuel; Forsythe, Steven; Mattison, Sarah K.; Mahler, Hally; Hankins, Catherine A.

2011-01-01

Background This paper proposes an approach to estimating the costs of demand creation for voluntary medical male circumcision (VMMC) scale-up in 13 countries of eastern and southern Africa. It addresses two key questions: (1) what are the elements of a standardized package for demand creation? And (2) what challenges exist and must be taken into account in estimating the costs of demand creation? Methods and Findings We conducted a key informant study on VMMC demand creation using purposive sampling to recruit seven people who provide technical assistance to government programs and manage budgets for VMMC demand creation. Key informants provided their views on the important elements of VMMC demand creation and the most effective funding allocations across different types of communication approaches (e.g., mass media, small media, outreach/mobilization). The key finding was the wide range of views, suggesting that a standard package of core demand creation elements would not be universally applicable. This underscored the importance of tailoring demand creation strategies and estimates to specific country contexts before estimating costs. The key informant interviews, supplemented by the researchers' field experience, identified these issues to be addressed in future costing exercises: variations in the cost of VMMC demand creation activities by country and program, decisions about the quality and comprehensiveness of programming, and lack of data on critical elements needed to “trigger the decision” among eligible men. Conclusions Based on this study's findings, we propose a seven-step methodological approach to estimate the cost of VMMC scale-up in a priority country, based on our key assumptions. However, further work is needed to better understand core components of a demand creation package and how to cost them. Notwithstanding the methodological challenges, estimating the cost of demand creation remains an essential element in deriving estimates of the total costs for VMMC scale-up in eastern and southern Africa. PMID:22140450

A cost-benefit analysis of a deposit-refund program for beverage containers in Israel.

PubMed

Lavee, Doron

2010-02-01

The paper presents a full cost-benefit analysis of a deposit-refund program for beverage containers in Israel. We examine all cost elements of the program--storage, collection, and treatment costs of empty containers, and all potential benefits--savings in alternative treatment costs (waste collection and landfill disposal), cleaner public spaces, reduction of landfill volumes, energy-savings externalities associated with use of recycled materials, and creation of new workplaces. A wide variety of data resources is employed, and some of the critical issues are examined via several approaches. The main finding of the paper is that the deposit-refund program is clearly economically worthwhile. The paper contributes to the growing body of literature on deposit-refund programs by its complete and detailed analysis of all relevant factors of such a program, and also specifically in its analysis of the savings in alternative waste management costs. This analysis reveals greater savings than are usually assumed, and thus shows the deposit-refund program to be highly efficient.

Computer program for definition of transonic axial-flow compressor blade rows. [computer program for fabrication and aeroelastic analysis

NASA Technical Reports Server (NTRS)

Crouse, J. E.

1974-01-01

A method is presented for designing axial-flow compressor blading from blade elements defined on cones which pass through the blade-edge streamline locations. Each blade-element centerline is composed of two segments which are tangent to each other. The centerline and surfaces of each segment have constant change of angle with path distance. The stacking line for the blade elements can be leaned in both the axial and tangential directions. The output of the computer program gives coordinates for fabrication and properties for aeroelastic analysis for planar blade sections. These coordinates and properties are obtained by interpolation across conical blade elements. The program is structured to be coupled with an aerodynamic design program.

Program Calculates Forces in Bolted Structural Joints

NASA Technical Reports Server (NTRS)

Buder, Daniel A.

2005-01-01

FORTRAN 77 computer program calculates forces in bolts in the joints of structures. This program is used in conjunction with the NASTRAN finite-element structural-analysis program. A mathematical model of a structure is first created by approximating its load-bearing members with representative finite elements, then NASTRAN calculates the forces and moments that each finite element contributes to grid points located throughout the structure. The user selects the finite elements that correspond to structural members that contribute loads to the joints of interest, and identifies the grid point nearest to each such joint. This program reads the pertinent NASTRAN output, combines the forces and moments from the contributing elements to determine the resultant force and moment acting at each proximate grid point, then transforms the forces and moments from these grid points to the centroids of the affected joints. Then the program uses these joint loads to obtain the axial and shear forces in the individual bolts. The program identifies which bolts bear the greatest axial and/or shear loads. The program also performs a fail-safe analysis in which the foregoing calculations are repeated for a sequence of cases in which each fastener, in turn, is assumed not to transmit an axial force.

Defining the Natural Atmospheric Environment Requirements for the NASA Constellation Program

NASA Technical Reports Server (NTRS)

Roberts, Barry C.; Leahy, Frank

2008-01-01

The National Aeronautics and Space Administration began developing a new vehicle under the Constellation Program to replace the Space Shuttle. The Ares-1 launch vehicle and the Orion capsule will be used to ferry crew and some payloads to the International Space Station and will also be used for new missions to the moon, As development of this new vehicle begins, the Natural Environments Branch at Marshall Space Flight Center has been tasked with defining the natural environments the vehicle will encounter and working with the program to develop natural environmental requirements for the vehicles' elements. An overview of the structure of the program is given, along with a description of the Constellation Design Specification for Natural Environments and the Constellation Natural Environments Definition for Design documents and how they apply to the Ares-I and Orion vehicles.

An internal variable constitutive model for the large deformation of metals at high temperatures

NASA Technical Reports Server (NTRS)

Brown, Stuart; Anand, Lallit

1988-01-01

The advent of large deformation finite element methodologies is beginning to permit the numerical simulation of hot working processes whose design until recently has been based on prior industrial experience. Proper application of such finite element techniques requires realistic constitutive equations which more accurately model material behavior during hot working. A simple constitutive model for hot working is the single scalar internal variable model for isotropic thermal elastoplasticity proposed by Anand. The model is recalled and the specific scalar functions, for the equivalent plastic strain rate and the evolution equation for the internal variable, presented are slight modifications of those proposed by Anand. The modified functions are better able to represent high temperature material behavior. The monotonic constant true strain rate and strain rate jump compression experiments on a 2 percent silicon iron is briefly described. The model is implemented in the general purpose finite element program ABAQUS.

A hybrid-stress finite element approach for stress and vibration analysis in linear anisotropic elasticity

NASA Technical Reports Server (NTRS)

Oden, J. Tinsley; Fly, Gerald W.; Mahadevan, L.

1987-01-01

A hybrid stress finite element method is developed for accurate stress and vibration analysis of problems in linear anisotropic elasticity. A modified form of the Hellinger-Reissner principle is formulated for dynamic analysis and an algorithm for the determination of the anisotropic elastic and compliance constants from experimental data is developed. These schemes were implemented in a finite element program for static and dynamic analysis of linear anisotropic two dimensional elasticity problems. Specific numerical examples are considered to verify the accuracy of the hybrid stress approach and compare it with that of the standard displacement method, especially for highly anisotropic materials. It is that the hybrid stress approach gives much better results than the displacement method. Preliminary work on extensions of this method to three dimensional elasticity is discussed, and the stress shape functions necessary for this extension are included.

Design of an ultrasonic micro-array for near field sensing during retinal microsurgery.

PubMed

Clarke, Clyde; Etienne-Cummings, Ralph

2006-01-01

A method for obtaining the optimal and specific sensor parameters for a tool-tip mountable ultrasonic transducer micro-array is presented. The ultrasonic transducer array sensor parameters, such as frequency of operation, element size, inter-element spacing, number of elements and transducer geometry are obtained using a quadratic programming method to obtain a maximum directivity while being constrained to a total array size of 4 mm2 and the required resolution for retinal imaging. The technique is used to design a uniformly spaced NxN transducer array that is capable of resolving structures in the retina that are as small as 2 microm from a distance of 100 microm. The resultant 37x37 array of 16 microm transducers with 26 microm spacing will be realized as a Capacitive Micromachined Ultrasonic Transducer (CMUT) array and used for imaging and robotic guidance during retinal microsurgery.

Gamma signatures of the C-BORD Tagged Neutron Inspection System

NASA Astrophysics Data System (ADS)

Sardet, A.; Pérot, B.; Carasco, C.; Sannié, G.; Moretto, S.; Nebbia, G.; Fontana, C.; Pino, F.; Iovene, A.; Tintori, C.

2018-01-01

In the frame of C-BORD project (H2020 program of the EU), a Rapidly relocatable Tagged Neutron Inspection System (RRTNIS) is being developed to non-intrusively detect explosives, chemical threats, and other illicit goods in cargo containers. Material identification is performed through gamma spectroscopy, using twenty NaI detectors and four LaBr3 detectors, to determine the different elements composing the inspected item from their specific gamma signatures induced by fast neutrons. This is performed using an unfolding algorithm to decompose the energy spectrum of a suspect item, selected by X-ray radiography and on which the RRTNIS inspection is focused, on a database of pure element gamma signatures. This paper reports on simulated signatures for the NaI and LaBr3 detectors, constructed using the MCNP6 code. First experimental spectra of a few elements of interest are also presented.

Novel green tissue-specific synthetic promoters and cis-regulatory elements in rice.

PubMed

Wang, Rui; Zhu, Menglin; Ye, Rongjian; Liu, Zuoxiong; Zhou, Fei; Chen, Hao; Lin, Yongjun

2015-12-11

As an important part of synthetic biology, synthetic promoter has gradually become a hotspot in current biology. The purposes of the present study were to synthesize green tissue-specific promoters and to discover green tissue-specific cis-elements. We first assembled several regulatory sequences related to tissue-specific expression in different combinations, aiming to obtain novel green tissue-specific synthetic promoters. GUS assays of the transgenic plants indicated 5 synthetic promoters showed green tissue-specific expression patterns and different expression efficiencies in various tissues. Subsequently, we scanned and counted the cis-elements in different tissue-specific promoters based on the plant cis-elements database PLACE and the rice cDNA microarray database CREP for green tissue-specific cis-element discovery, resulting in 10 potential cis-elements. The flanking sequence of one potential core element (GEAT) was predicted by bioinformatics. Then, the combination of GEAT and its flanking sequence was functionally identified with synthetic promoter. GUS assays of the transgenic plants proved its green tissue-specificity. Furthermore, the function of GEAT flanking sequence was analyzed in detail with site-directed mutagenesis. Our study provides an example for the synthesis of rice tissue-specific promoters and develops a feasible method for screening and functional identification of tissue-specific cis-elements with their flanking sequences at the genome-wide level in rice.

Patient-specific finite element modeling of bones.

PubMed

Poelert, Sander; Valstar, Edward; Weinans, Harrie; Zadpoor, Amir A

2013-04-01

Finite element modeling is an engineering tool for structural analysis that has been used for many years to assess the relationship between load transfer and bone morphology and to optimize the design and fixation of orthopedic implants. Due to recent developments in finite element model generation, for example, improved computed tomography imaging quality, improved segmentation algorithms, and faster computers, the accuracy of finite element modeling has increased vastly and finite element models simulating the anatomy and properties of an individual patient can be constructed. Such so-called patient-specific finite element models are potentially valuable tools for orthopedic surgeons in fracture risk assessment or pre- and intraoperative planning of implant placement. The aim of this article is to provide a critical overview of current themes in patient-specific finite element modeling of bones. In addition, the state-of-the-art in patient-specific modeling of bones is compared with the requirements for a clinically applicable patient-specific finite element method, and judgment is passed on the feasibility of application of patient-specific finite element modeling as a part of clinical orthopedic routine. It is concluded that further development in certain aspects of patient-specific finite element modeling are needed before finite element modeling can be used as a routine clinical tool.

Criticality safety evaluation for the Advanced Test Reactor enhanced low enriched uranium fuel elements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Montierth, Leland M.

2016-07-19

The Global Threat Reduction Initiative (GTRI) convert program is developing a high uranium density fuel based on a low enriched uranium (LEU) uranium-molybdenum alloy. Testing of prototypic GTRI fuel elements is necessary to demonstrate integrated fuel performance behavior and scale-up of fabrication techniques. GTRI Enhanced LEU Fuel (ELF) elements based on the ATR-Standard Size elements (all plates fueled) are to be fabricated for testing in the Advanced Test Reactor (ATR). While a specific ELF element design will eventually be provided for detailed analyses and in-core testing, this criticality safety evaluation (CSE) is intended to evaluate a hypothetical ELF element designmore » for criticality safety purposes. Existing criticality analyses have analyzed Standard (HEU) ATR elements from which controls have been derived. This CSE documents analysis that determines the reactivity of the hypothetical ELF fuel elements relative to HEU ATR elements and whether the existing HEU ATR element controls bound the ELF element. The initial calculations presented in this CSE analyzed the original ELF design, now referred to as Mod 0.1. In addition, as part of a fuel meat thickness optimization effort for reactor performance, other designs have been evaluated. As of early 2014 the most current conceptual designs are Mk1A and Mk1B, that were previously referred to as conceptual designs Mod 0.10 and Mod 0.11, respectively. Revision 1 evaluates the reactivity of the ATR HEU Mark IV elements for a comparison with the Mark VII elements.« less

ASAP- ARTIFICIAL SATELLITE ANALYSIS PROGRAM

NASA Technical Reports Server (NTRS)

Kwok, J.

1994-01-01

The Artificial Satellite Analysis Program (ASAP) is a general orbit prediction program which incorporates sufficient orbit modeling accuracy for mission design, maneuver analysis, and mission planning. ASAP is suitable for studying planetary orbit missions with spacecraft trajectories of reconnaissance (flyby) and exploratory (mapping) nature. Sample data is included for a geosynchronous station drift cycle study, a Venus radar mapping strategy, a frozen orbit about Mars, and a repeat ground trace orbit. ASAP uses Cowell's method in the numerical integration of the equations of motion. The orbital mechanics calculation contains perturbations due to non-sphericity (up to a 40 X 40 field) of the planet, lunar and solar effects, and drag and solar radiation pressure. An 8th order Runge-Kutta integration scheme with variable step size control is used for efficient propagation. The input includes the classical osculating elements, orbital elements of the sun relative to the planet, reference time and dates, drag coefficient, gravitational constants, and planet radius, rotation rate, etc. The printed output contains Cartesian coordinates, velocity, equinoctial elements, and classical elements for each time step or event step. At each step, selected output is added to a plot file. The ASAP package includes a program for sorting this plot file. LOTUS 1-2-3 is used in the supplied examples to graph the results, but any graphics software package could be used to process the plot file. ASAP is not written to be mission-specific. Instead, it is intended to be used for most planetary orbiting missions. As a consequence, the user has to have some basic understanding of orbital mechanics to provide the correct input and interpret the subsequent output. ASAP is written in FORTRAN 77 for batch execution and has been implemented on an IBM PC compatible computer operating under MS-DOS. The ASAP package requires a math coprocessor and a minimum of 256K RAM. This program was last updated in 1988 with version 2.03. IBM PC is a registered trademark of International Business Machines. MS-DOS is a registered trademark of Microsoft Corporation. Lotus and 1-2-3 are registered trademarks of Lotus Development Corporation.

An overview of the NASA textile composites program

NASA Technical Reports Server (NTRS)

Dexter, H. Benson

1993-01-01

The NASA Langley Research Center is conducting and sponsoring research to explore the benefits of textile reinforced composites for civil transport aircraft primary structures. The objective of this program is to develop and demonstrate the potential of affordable textile reinforced composite materials to meet design properties and damage tolerance requirements of advanced aircraft structures. In addition to in-house research, the program includes major participation by the aircraft industry and aerospace textile companies. The major program elements include development of textile preforms, processing science, mechanics of materials, experimental characterization of materials, and development and evaluation of textile reinforced composite structural elements and subcomponents. The NASA Langley in-house research is focused on science-based understanding of resin transfer molding (RTM), development of powder-coated towpreg processes, analysis methodology, and development of a performance database on textile reinforced composites. The focus of the textile industry participation is on development of multidirectional, damage-tolerant preforms, and the aircraft industry participation is in the areas of innovative design concepts, cost-effective fabrication, and testing of textile reinforced composite structural elements and subcomponents. Textile processes such as 3-D weaving, 2-D and 3-D braiding, and knitting/stitching are being compared with conventional laminated tape processes for improved damage tolerance. Through-the-thickness reinforcements offer significant damage tolerance improvements. However, these gains must be weighed against potential loss in in-plane properties such as strength and stiffness. Analytical trade studies are underway to establish design guidelines for the application of textile material forms to meet specific loading requirements. Fabrication and testing of large structural components are required to establish the full potential of textile reinforced composite materials. The goals of the NASA Langley-sponsored research program are to demonstrate technology readiness with subscale composite components by 1995 and to verify the performance of full-scale composite primary aircraft structural components by 1997. The status of textile reinforced composite structural elements under development by Boeing, Douglas, Lockheed, and Grumman are presented. Included are braided frames and woven/stitched wing and fuselage panels.

Calculation of flight vibration levels of the AH-1G helicopter and correlation with existing flight vibration measurements

NASA Technical Reports Server (NTRS)

Sopher, R.; Twomey, W. J.

1990-01-01

NASA-Langley is sponsoring a rotorcraft structural dynamics program with the objective to establish in the U.S. a superior capability to utilize finite element analysis models for calculations to support industrial design of helicopter airframe structures. In the initial phase of the program, teams from the major U.S. manufacturers of helicopter airframes will apply extant finite element analysis methods to calculate loads and vibrations of helicopter airframes, and perform correlations between analysis and measurements. The aforementioned rotorcraft structural dynamics program was given the acronym DAMVIBS (Design Analysis Method for Vibrations). Sikorsky's RDYNE Rotorcraft Dynamics Analysis used for the correlation study, the specifics of the application of RDYNE to the AH-1G, and comparisons of the predictions of the method with flight data for loads and vibrations on the AH-1G are described. RDYNE was able to predict trends of variations of loads and vibrations with airspeed, but in some instances magnitudes differed from measured results by factors of two or three to one. Sensitivities were studied of predictions to rotor inflow modeling, effects of torsional modes, number of blade bending modes, fuselage structural damping, and hub modal content.

COMOC 2: Two-dimensional aerodynamics sequence, computer program user's guide

NASA Technical Reports Server (NTRS)

Manhardt, P. D.; Orzechowski, J. A.; Baker, A. J.

1977-01-01

The COMOC finite element fluid mechanics computer program system is applicable to diverse problem classes. The two dimensional aerodynamics sequence was established for solution of the potential and/or viscous and turbulent flowfields associated with subsonic flight of elementary two dimensional isolated airfoils. The sequence is constituted of three specific flowfield options in COMOC for two dimensional flows. These include the potential flow option, the boundary layer option, and the parabolic Navier-Stokes option. By sequencing through these options, it is possible to computationally construct a weak-interaction model of the aerodynamic flowfield. This report is the user's guide to operation of COMOC for the aerodynamics sequence.

pySecDec: A toolbox for the numerical evaluation of multi-scale integrals

NASA Astrophysics Data System (ADS)

Borowka, S.; Heinrich, G.; Jahn, S.; Jones, S. P.; Kerner, M.; Schlenk, J.; Zirke, T.

2018-01-01

We present pySECDEC, a new version of the program SECDEC, which performs the factorization of dimensionally regulated poles in parametric integrals, and the subsequent numerical evaluation of the finite coefficients. The algebraic part of the program is now written in the form of python modules, which allow a very flexible usage. The optimization of the C++ code, generated using FORM, is improved, leading to a faster numerical convergence. The new version also creates a library of the integrand functions, such that it can be linked to user-specific codes for the evaluation of matrix elements in a way similar to analytic integral libraries.

Relative Displacement Method for Track-Structure Interaction

PubMed Central

Ramos, Óscar Ramón; Pantaleón, Marcos J.

2014-01-01

The track-structure interaction effects are usually analysed with conventional FEM programs, where it is difficult to implement the complex track-structure connection behaviour, which is nonlinear, elastic-plastic and depends on the vertical load. The authors developed an alternative analysis method, which they call the relative displacement method. It is based on the calculation of deformation states in single DOF element models that satisfy the boundary conditions. For its solution, an iterative optimisation algorithm is used. This method can be implemented in any programming language or analysis software. A comparison with ABAQUS calculations shows a very good result correlation and compliance with the standard's specifications. PMID:24634610

Design and fabrication of solar cell modules

NASA Technical Reports Server (NTRS)

Shaughnessy, T. P.

1978-01-01

A program conducted for design, fabrication and evaluation of twelve silicon solar cell modules is described. The purpose of the program was to develop a module design consistent with the requirements and objectives of JPL specification and to also incorporate elements of new technologies under development to meet LSSA Project goals. Module development emphasized preparation of a technically and economically competitive design based upon utilization of ion implanted solar cells and a glass encapsulation system. The modules fabricated, tested and delivered were of nominal 2 X 2 foot dimensions and 20 watt minimum rating. Basic design, design rationale, performance and results of environmental testing are described.

A Synopsis of Technical Issues of Concern for Monitoring Trace Elements in Highway and Urban Runoff

USGS Publications Warehouse

Breault, Robert F.; Granato, Gregory E.

2000-01-01

Trace elements, which are regulated for aquatic life protection, are a primary concern in highway- and urban-runoff studies because stormwater runoff may transport these constituents from the land surface to receiving waters. Many of these trace elements are essential for biological activity and become detrimental only when geologic or anthropogenic sources exceed concentrations beyond ranges typical of the natural environment. The Federal Highway Administration and State Transportation Agencies are concerned about the potential effects of highway runoff on the watershed scale and for the management and protection of watersheds. Transportation agencies need information that is documented as valid, current, and scientifically defensible to support planning and management decisions. There are many technical issues of concern for monitoring trace elements; therefore, trace-element data commonly are considered suspect, and the responsibility to provide data-quality information to support the validity of reported results rests with the data-collection agency. Paved surfaces are fundamentally different physically, hydraulically, and chemically from the natural surfaces typical of most freshwater systems that have been the focus of many traceelement- monitoring studies. Existing scientific conceptions of the behavior of trace elements in the environment are based largely upon research on natural systems, rather than on systems typical of pavement runoff. Additionally, the logistics of stormwater sampling are difficult because of the great uncertainty in the occurrence and magnitude of storm events. Therefore, trace-element monitoring programs may be enhanced if monitoring and sampling programs are automated. Automation would standardize the process and provide a continuous record of the variations in flow and water-quality characteristics. Great care is required to collect and process samples in a manner that will minimize potential contamination or attenuation of trace elements and other sources of bias and variability in the sampling process. Trace elements have both natural and anthropogenic sources that may affect the sampling process, including the sample-collection and handling materials used in many trace-element monitoring studies. Trace elements also react with these materials within the timescales typical for collection, processing and analysis of runoff samples. To study the characteristics and potential effects of trace elements in highway and urban runoff, investigators typically sample one or more operationally defined matrixes including: whole water, dissolved (filtered water), suspended sediment, bottom sediment, biological tissue, and contaminant sources. The sampling and analysis of each of these sample matrixes can provide specific information about the occurrence and distribution of trace elements in runoff and receiving waters. There are, however, technical concerns specific to each matrix that must be understood and addressed through use of proper collection and processing protocols. Valid protocols are designed to minimize inherent problems and to maximize the accuracy, precision, comparability, and representativeness of data collected. Documentation, including information about monitoring protocols, quality assurance and quality control efforts, and ancillary data also is necessary to establish data quality. This documentation is especially important for evaluation of historical traceelement monitoring data, because trace-element monitoring protocols and analysis methods have been constantly changing over the past 30 years.

Space Radiation Program Element

NASA Technical Reports Server (NTRS)

Krenek, Sam

2008-01-01

This poster presentation shows the various elements of the Space Radiation Program. It reviews the program requirements: develop and validate standards, quantify space radiation human health risks, mitigate risks through countermeasures and technologies, and treat and monitor unmitigated risks.

An Analysis of Operational Art: Field Force Synchronization in Vietnam from 1965-1967

DTIC Science & Technology

2013-05-23

a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1...Degree Programs Robert F. Baumann, Ph.D. The opinions and conclusions expressed herein are those of the student author and do not...military and social operational variables, the specific elements of operational design do not prove as useful. Muddled and cloudy perspectives of the

Reference Earth Orbital Research and Applications Investigations (Blue Book). Volume 2: Astronomy

NASA Technical Reports Server (NTRS)

1971-01-01

Representative astronomy objectives, experiments, facilities, and instruments for use in the space station are discussed. The specific program elements describe a coordinated multiwavelength, multisensor approach needed to locate, observe, and interpret radiation from extragalactic, galactic, solar, and planetary sources in the different parts of the spectrum with spectral, angular, and temporal resolution not achievable from earth sites. Items of astronomy equipment are identified for the experiments to be conducted.

Comparison of Numerical and Experimental Time-Resolved Near-Field Hall Thruster Plasma Properties

DTIC Science & Technology

2014-03-06

Near-Field Hall Thruster Plasma Properties 5a. CONTRACT NUMBER In-House 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d...Resolved Near-Field Hall Thruster Plasma Properties Ashley E. Gonzales, Justin W. Koo, and William A. Hargus, Jr. Abstract— Breathing mode oscillations... thruster , HPHall, plume emission. I. INTRODUCTION HALL thrusters are a plasma propulsion technologywidely used due to their low thrust, high specific impulse

Advanced On-the-Job Training System: System Specification

DTIC Science & Technology

1990-05-01

3.1.5.2.10 Evaluation Subsystem spotfor the Traking Devopment and Deliery Subsystem ..... 22 3.1.5.2.11 TrIning Development=dDelivery Subsystem sL...e. Alsys Ada compiler f. Ethernet Local Area Network reference manual(s) g. Infotron 992 network reference manual(s) h. Computer Program Source...1989 a. Daily check of mainframe components, including all elements critical to support the terminal network . b. Restoration of mainframe equipment

NASA's new university engineering space research programs

NASA Technical Reports Server (NTRS)

Sadin, Stanley R.

1988-01-01

The objective of a newly emerging element of NASA's university engineering programs is to provide a more autonomous element that will enhance and broaden the capabilities in academia, enabling them to participate more effectively in the U.S. civil space program. The programs utilize technical monitors at NASA centers to foster collaborative arrangements, exchange of personnel, and the sharing of facilities between NASA and the universities. The elements include: the university advanced space design program, which funds advanced systems study courses at the senior and graduate levels; the university space engineering research program that supports cross-disciplinary research centers; the outreach flight experiments program that offers engineering research opportunities to universities; and the planned university investigator's research program to provide grants to individuals with outstanding credentials.

Yugoslavia: preventing the spread of HIV and STDs.

PubMed

Dzeletovic, A; Popovic, R

1999-01-01

This article discusses the specific actions taken by Yugoslavia in preventing the spread of HIV and AIDS in their country. Two years after the first HIV infection was diagnosed and recognized in 1985, a national level program was established based on the Global AIDS Strategy as defined in 1986 and the Global AIDS Program in 1987. Three essential elements in the program were prevention and control of risky behavior; safe public health procedures, and social tolerance. Among the first major activities organized was the First Conference on AIDS, held in 1987; it was followed in the following year by another conference which registered almost 150 papers regarding epidemiology, transfusiology, health education and drug dependence. In 1988, the Institute of Public Health of Serbia, Belgrade, published and distributed numerous pamphlets, folders, posters and video cassettes including 5,000 copies of the multi-colored poster "Beware of AIDS." The program activities have resulted in the design of a variety of projects that focused on specific problems and segments of the population, namely: AIDS Information for Dentists, The Health Education Program for Elementary School Children and AIDS, and Measures on AIDS Prevention in Health Facilities. Furthermore, The Resolution on Protecting the Population from STDs was passed in 1994 and a new Program of Protecting the Population from STDs was been adopted; this program includes activities on the prevention and control of HIV/AIDS, gonorrhea, syphilis and Hepatitis B.

Experiential Learning in Engineering Education.

ERIC Educational Resources Information Center

Harrisberger, Lee; And Others

After a discussion of experiential learning as an element in higher education and of the program evaluation process used in this study, six different but successful experiential learning programs in engineering are described and compared. From these comparisons some conclusions are drawn about important program elements. The six programs described…

Recent progress in NASA Langley textile reinforced composites program

NASA Technical Reports Server (NTRS)

Dexter, H. Benson; Harris, Charles E.; Johnston, Norman J.

1992-01-01

The NASA LaRC is conducting and sponsoring research to explore the benefits of textile reinforced composites for civil transport aircraft primary structures. The objective of this program is to develop and demonstrate the potential of affordable textile reinforced composite materials to meet design properties and damage tolerance requirements of advanced aircraft structural concepts. In addition to in-house research, the program was recently expanded to include major participation by the aircraft industry and aerospace textile companies. The major program elements include development of textile preforms, processing science, mechanics of materials, experimental characterization of materials, and development and evaluation of textile reinforced composite structural elements and subcomponents. The NASA Langley in-house focus is as follows: development of a science-based understanding of resin transfer molding (RTM), development of powder-coated towpreg processes, analysis methodology, and development of a performance database on textile reinforced composites. The focus of the textile industry participation is on development of multidirectional, damage-tolerant preforms, and the aircraft industry participation is in the areas of design, fabrication and testing of textile reinforced composite structural elements and subcomponents. Textile processes such as 3D weaving, 2D and 3D braiding, and knitting/stitching are being compared with conventional laminated tape processes for improved damage tolerance. Through-the-thickness reinforcements offer significant damage tolerance improvements. However, these gains must be weighed against potential loss in in-plane properties such as strength and stiffness. Analytical trade studies are underway to establish design guidelines for the application of textile material forms to meet specific loading requirements. Fabrication and testing of large structural components are required to establish the full potential of textile reinforced composite materials.

Insights on the effectiveness of reward schemes from 10-year longitudinal case studies in 2 Italian regions.

PubMed

Vainieri, Milena; Lungu, Daniel Adrian; Nuti, Sabina

2018-01-30

Pay for performance (P4P) programs have been widely analysed in literature, and the results regarding their impact on performance are mixed. Moreover, in the real-life setting, reward schemes are designed combining multiple elements altogether, yet, it is not clear what happens when they are applied using different combinations. To provide insights on how P4P programs are influenced by 5 key elements: whom, what, how, how many targets, and how much to reward. A qualitative longitudinal analysis of 10 years of P4P reward schemes adopted by the regional administrations of Tuscany and Lombardy (Italy) was conducted. The effects of the P4P features on performance are discussed considering both overall and specific indicators. Both regions applied financial reward schemes for General Managers by linking the variable pay to performance. While Tuscany maintained a relatively stable financial incentive design and governance tools, Lombardy changed some elements of the design and introduced, in 2012, a P4P program aimed to reward the providers. The main differences between the 2 cases regard the number of targets (how many), the type (what), and the method applied to set targets (how). Considering the overall performance obtained by the 2 regions, it seems that whom, how, and how much to reward are not relevant in the success of P4P programs; instead, the number (how many) and the type (what) of targets set may influence the performance improvement processes driven by financial reward schemes. © 2018 The Authors. The International Journal of Health Planning and Management published by John Wiley & Sons Ltd.

Ground Operations Aerospace Language (GOAL). Volume 4: Interpretive code translator

NASA Technical Reports Server (NTRS)

1973-01-01

This specification identifies and describes the principal functions and elements of the Interpretive Code Translator which has been developed for use with the GOAL Compiler. This translator enables the user to convert a compliled GOAL program to a highly general binary format which is designed to enable interpretive execution. The translator program provides user controls which are designed to enable the selection of various output types and formats. These controls provide a means for accommodating many of the implementation options which are discussed in the Interpretive Code Guideline document. The technical design approach is given. The relationship between the translator and the GOAL compiler is explained and the principal functions performed by the Translator are described. Specific constraints regarding the use of the Translator are discussed. The control options are described. These options enable the user to select outputs to be generated by the translator and to control vrious aspects of the translation processing.

Development of a curved pipe capability for the NASTRAN finite element program

NASA Technical Reports Server (NTRS)

Jeter, J. W., Jr.

1977-01-01

A curved pipe element capability for the NASTRAN structural analysis program is developed using the NASTRAN dummy element feature. A description is given of the theory involved in the subroutines which describe stiffness, mass, thermal and enforced deformation loads, and force and stress recovery for the curved pipe element. Incorporation of these subroutines into NASTRAN is discussed. Test problems are proposed. Instructions on use of the new element capability are provided.

Consideration of an Applied Model of Public Health Program Infrastructure

PubMed Central

Lavinghouze, Rene; Snyder, Kimberly; Rieker, Patricia; Ottoson, Judith

2015-01-01

Systemic infrastructure is key to public health achievements. Individual public health program infrastructure feeds into this larger system. Although program infrastructure is rarely defined, it needs to be operationalized for effective implementation and evaluation. The Ecological Model of Infrastructure (EMI) is one approach to defining program infrastructure. The EMI consists of 5 core (Leadership, Partnerships, State Plans, Engaged Data, and Managed Resources) and 2 supporting (Strategic Understanding and Tactical Action) elements that are enveloped in a program’s context. We conducted a literature search across public health programs to determine support for the EMI. Four of the core elements were consistently addressed, and the other EMI elements were intermittently addressed. The EMI provides an initial and partial model for understanding program infrastructure, but additional work is needed to identify evidence-based indicators of infrastructure elements that can be used to measure success and link infrastructure to public health outcomes, capacity, and sustainability. PMID:23411417

Integrating Science and Engineering to Implement Evidence-Based Practices in Health Care Settings

PubMed Central

Wu, Shinyi; Duan, Naihua; Wisdom, Jennifer P.; Kravitz, Richard L.; Owen, Richard R.; Sullivan, Greer; Wu, Albert W.; Di Capua, Paul; Hoagwood, Kimberly Eaton

2015-01-01

Integrating two distinct and complementary paradigms, science and engineering, may produce more effective outcomes for the implementation of evidence-based practices in health care settings. Science formalizes and tests innovations, whereas engineering customizes and optimizes how the innovation is applied tailoring to accommodate local conditions. Together they may accelerate the creation of an evidence-based healthcare system that works effectively in specific health care settings. We give examples of applying engineering methods for better quality, more efficient, and safer implementation of clinical practices, medical devices, and health services systems. A specific example was applying systems engineering design that orchestrated people, process, data, decision-making, and communication through a technology application to implement evidence-based depression care among low-income patients with diabetes. We recommend that leading journals recognize the fundamental role of engineering in implementation research, to improve understanding of design elements that create a better fit between program elements and local context. PMID:25217100

NATAL-74; Towards a Common Programming Language for CAL.

ERIC Educational Resources Information Center

Brahan, J. W.; Colpitts, B. A.

NATAL-74 is a programing language designed for Canadian computer aided learning (CAL) programs. The language has two fundamental elements: the UNIT provides the interface between the student and the subject matter, and the PROCEDURE element embodies teaching strategy. Desirable features of several programing languages have been adapted to cope…

Space station integrated propulsion and fluid systems study. Space station program fluid management systems databook

NASA Technical Reports Server (NTRS)

Bicknell, B.; Wilson, S.; Dennis, M.; Lydon, M.

1988-01-01

Commonality and integration of propulsion and fluid systems associated with the Space Station elements are being evaluated. The Space Station elements consist of the core station, which includes habitation and laboratory modules, nodes, airlocks, and trusswork; and associated vehicles, platforms, experiments, and payloads. The program is being performed as two discrete tasks. Task 1 investigated the components of the Space Station architecture to determine the feasibility and practicality of commonality and integration among the various propulsion elements. This task was completed. Task 2 is examining integration and commonality among fluid systems which were identified by the Phase B Space Station contractors as being part of the initial operating capability (IOC) and growth Space Station architectures. Requirements and descriptions for reference fluid systems were compiled from Space Station documentation and other sources. The fluid systems being examined are: an experiment gas supply system, an oxygen/hydrogen supply system, an integrated water system, the integrated nitrogen system, and the integrated waste fluids system. Definitions and descriptions of alternate systems were developed, along with analyses and discussions of their benefits and detriments. This databook includes fluid systems descriptions, requirements, schematic diagrams, component lists, and discussions of the fluid systems. In addition, cost comparison are used in some cases to determine the optimum system for a specific task.

An Overview of State Policies Supporting Worksite Health Promotion Programs.

PubMed

VanderVeur, Jennifer; Gilchrist, Siobhan; Matson-Koffman, Dyann

2017-05-01

Worksite health promotion (WHP) programs can reduce the occurrence of cardiovascular disease risk factors. State law can encourage employers and employer-provided insurance companies to offer comprehensive WHP programs. This research examines state law authorizing WHP programs. Quantitative content analysis. Worksites or workplaces. United States (and the District of Columbia). State law in effect in 2013 authorizing WHP programs. Frequency and distribution of states with WHP laws. To determine the content of the laws for analysis and coding, we identified 18 policy elements, 12 from the Centers for Disease Control and Prevention's Worksite Health ScoreCard (HSC) and 6 additional supportive WHP strategies. We used these strategies as key words to search for laws authorizing WHP programs or select WHP elements. We calculated the number and type of WHP elements for each state with WHP laws and selected two case examples from states with comprehensive WHP laws. Twenty-four states authorized onsite WHP programs, 29 authorized WHP through employer-provided insurance plans, and 18 authorized both. Seven states had a comprehensive WHP strategy, addressing 8 or more of 12 HSC elements. The most common HSC elements were weight management, tobacco cessation, and physical activity. Most states had laws encouraging the adoption of WHP programs. Massachusetts and Maine are implementing comprehensive WHP laws but studies evaluating their health impact are needed.

A study of trade-specific occupational ergonomics considerations in the U.S. construction industry.

PubMed

Choi, Sang D

2012-01-01

The aim of this survey study was to identify trade-specific ergonomic issues, and discuss practical solutions to reduce work-related musculoskeletal disorders (WMSDs) and injuries in the construction industry. Thirty-two construction firms in the Midwestern United States completed the final survey questionnaire. Twelve different construction skilled trades participated included: general contractor, road, heavy and highway, concrete, electrical, carpentry, landscaping, plumbing, roofing, steel erection, street lighting/traffic signal, and utility construction. Total workforce of the participating companies numbered 11,118 employees. More than 90% of the participants in the survey had a written safety program; however, the majority of the firms did not have a trade-specific ergonomic intervention. The survey revealed that construction constructors perceived safety (worker well-being) as a high priority in their company. This study suggested that construction skilled-trade jobs the construction worker to employ trade-specific hand tools and working body positions that may contribute to different types of WMSD risks, body parts injured, and injury sources. Possible practical construction trade-specific ergonomic solutions might be considered includinge: selection of ergonomic hand tools, reduction of weight of construction materials, and promotion of wellness exercises. This paper may imply that need for more trade-specific ergonomics program elements to help alleviate the work-related musculoskeletal problems in the construction field.

Fluids and Materials Science Studies Utilizing the Microgravity-vibration Isolation Mount (MIM)

NASA Technical Reports Server (NTRS)

Herring, Rodney; Tryggvason, Bjarni; Duval, Walter

1998-01-01

Canada's Microgravity Sciences Program (MSP) is the smallest program of the ISS partners and so can participate in only a few, highly focused projects in order to make a scientific and technological impact. One focused project involves determining the effect of accelerations (g-jitter) on scientific measurements in a microgravity environment utilizing the Microgravity-vibration Isolation Mount (MIM). Many experiments share the common characteristic of having a fluid stage in their process. The quality of the experimental measurements have been expected to be affected by g-jitters which has lead the ISS program to include specifications to limit the level of acceleration allowed on a subset of experimental racks. From finite element analysis (FEM), the ISS structure will not be able to meet the acceleration specifications. Therefore, isolation systems are necessary. Fluid science results and materials science results show significant sensitivity to g-jitter. The work done to date should be viewed only as a first look at the issue of g-jitter sensitivity. The work should continue with high priority such that the international science community and the ISS program can address the requirement and settle on an agreed to overall approach as soon as possible.

The interplay of early-life stress, nutrition, and immune activation programs adult hippocampal structure and function

PubMed Central

Hoeijmakers, Lianne; Lucassen, Paul J.; Korosi, Aniko

2015-01-01

Early-life adversity increases the vulnerability to develop psychopathologies and cognitive decline later in life. This association is supported by clinical and preclinical studies. Remarkably, experiences of stress during this sensitive period, in the form of abuse or neglect but also early malnutrition or an early immune challenge elicit very similar long-term effects on brain structure and function. During early-life, both exogenous factors like nutrition and maternal care, as well as endogenous modulators, including stress hormones and mediator of immunological activity affect brain development. The interplay of these key elements and their underlying molecular mechanisms are not fully understood. We discuss here the hypothesis that exposure to early-life adversity (specifically stress, under/malnutrition and infection) leads to life-long alterations in hippocampal-related cognitive functions, at least partly via changes in hippocampal neurogenesis. We further discuss how these different key elements of the early-life environment interact and affect one another and suggest that it is a synergistic action of these elements that shapes cognition throughout life. Finally, we consider different intervention studies aiming to prevent these early-life adversity induced consequences. The emerging evidence for the intriguing interplay of stress, nutrition, and immune activity in the early-life programming calls for a more in depth understanding of the interaction of these elements and the underlying mechanisms. This knowledge will help to develop intervention strategies that will converge on a more complete set of changes induced by early-life adversity. PMID:25620909

Writing analytic element programs in Python.

PubMed

Bakker, Mark; Kelson, Victor A

2009-01-01

The analytic element method is a mesh-free approach for modeling ground water flow at both the local and the regional scale. With the advent of the Python object-oriented programming language, it has become relatively easy to write analytic element programs. In this article, an introduction is given of the basic principles of the analytic element method and of the Python programming language. A simple, yet flexible, object-oriented design is presented for analytic element codes using multiple inheritance. New types of analytic elements may be added without the need for any changes in the existing part of the code. The presented code may be used to model flow to wells (with either a specified discharge or drawdown) and streams (with a specified head). The code may be extended by any hydrogeologist with a healthy appetite for writing computer code to solve more complicated ground water flow problems. Copyright © 2009 The Author(s). Journal Compilation © 2009 National Ground Water Association.

Distribution of Pd, Ag & U in the SiC Layer of an Irradiated TRISO Fuel Particle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas M. Lillo; Isabella J. van Rooyen

2014-08-01

The distribution of silver, uranium and palladium in the silicon carbide (SiC) layer of an irradiated TRISO fuel particle was studied using samples extracted from the SiC layer using focused ion beam (FIB) techniques. Transmission electron microscopy in conjunction with energy dispersive x-ray spectroscopy was used to identify the presence of the specific elements of interest at grain boundaries, triple junctions and precipitates in the interior of SiC grains. Details on sample fabrication, errors associated with measurements of elemental migration distances and the distances migrated by silver, palladium and uranium in the SiC layer of an irradiated TRISO particle frommore » the AGR-1 program are reported.« less

Bioenvironmental and radiological-safety feasibility studies, Atlantic-Pacific Interoceanic Canal. Phase 2, Freshwater ecology: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Templeton, W.L.; Dean, J.M.; Watson, D.G.

1968-06-28

The purpose of this program is to conduct studies in the freshwater environment to acquire data needed to evaluate and predict the potential radiation hazards to human populations in the defined regions of proposed nuclear excavations in the Republics of Panama and Colombia. The results of the field surveys conducted in Phase II are presented in this report. Specifically, the data describes the elemental composition of the major components of the ecosystem, and reports the calculated stable element concentration factors for the major food organisms. This data provides baseline values from which predictions can be made of the potential maximummore » radionuclide intake by populations using this resource.« less

A software platform for continuum modeling of ion channels based on unstructured mesh

NASA Astrophysics Data System (ADS)

Tu, B.; Bai, S. Y.; Chen, M. X.; Xie, Y.; Zhang, L. B.; Lu, B. Z.

2014-01-01

Most traditional continuum molecular modeling adopted finite difference or finite volume methods which were based on a structured mesh (grid). Unstructured meshes were only occasionally used, but an increased number of applications emerge in molecular simulations. To facilitate the continuum modeling of biomolecular systems based on unstructured meshes, we are developing a software platform with tools which are particularly beneficial to those approaches. This work describes the software system specifically for the simulation of a typical, complex molecular procedure: ion transport through a three-dimensional channel system that consists of a protein and a membrane. The platform contains three parts: a meshing tool chain for ion channel systems, a parallel finite element solver for the Poisson-Nernst-Planck equations describing the electrodiffusion process of ion transport, and a visualization program for continuum molecular modeling. The meshing tool chain in the platform, which consists of a set of mesh generation tools, is able to generate high-quality surface and volume meshes for ion channel systems. The parallel finite element solver in our platform is based on the parallel adaptive finite element package PHG which wass developed by one of the authors [1]. As a featured component of the platform, a new visualization program, VCMM, has specifically been developed for continuum molecular modeling with an emphasis on providing useful facilities for unstructured mesh-based methods and for their output analysis and visualization. VCMM provides a graphic user interface and consists of three modules: a molecular module, a meshing module and a numerical module. A demonstration of the platform is provided with a study of two real proteins, the connexin 26 and hemolysin ion channels.

MIRACAL: A mission radiation calculation program for analysis of lunar and interplanetary missions

NASA Technical Reports Server (NTRS)

Nealy, John E.; Striepe, Scott A.; Simonsen, Lisa C.

1992-01-01

A computational procedure and data base are developed for manned space exploration missions for which estimates are made for the energetic particle fluences encountered and the resulting dose equivalent incurred. The data base includes the following options: statistical or continuum model for ordinary solar proton events, selection of up to six large proton flare spectra, and galactic cosmic ray fluxes for elemental nuclei of charge numbers 1 through 92. The program requires an input trajectory definition information and specifications of optional parameters, which include desired spectral data and nominal shield thickness. The procedure may be implemented as an independent program or as a subroutine in trajectory codes. This code should be most useful in mission optimization and selection studies for which radiation exposure is of special importance.

Multidisciplinary analysis of actively controlled large flexible spacecraft

NASA Technical Reports Server (NTRS)

Cooper, Paul A.; Young, John W.; Sutter, Thomas R.

1986-01-01

The control of Flexible Structures (COFS) program has supported the development of an analysis capability at the Langley Research Center called the Integrated Multidisciplinary Analysis Tool (IMAT) which provides an efficient data storage and transfer capability among commercial computer codes to aid in the dynamic analysis of actively controlled structures. IMAT is a system of computer programs which transfers Computer-Aided-Design (CAD) configurations, structural finite element models, material property and stress information, structural and rigid-body dynamic model information, and linear system matrices for control law formulation among various commercial applications programs through a common database. Although general in its formulation, IMAT was developed specifically to aid in the evaluation of the structures. A description of the IMAT system and results of an application of the system are given.

Western Partnership for Environmental Technology Education Faculty Internship Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zehnder, N.

1994-12-31

As an important element within Western Partnership for Environmental Technology Education (PETE), summer internship opportunities are made available to environmental technology instructors, primarily at the community-college level, at participating federal laboratories, test facilities, state regulatory agencies and in private industry. The Program is intended to provide instructors with the opportunity to gain practical experience and understanding within the broad area of environmental technology to enhance the development and presentation of environmental technology curricula. Internship content is intended to be flexible to provide experiences which will relate to and meet the specific needs of the intern and his/her college. The Faultymore » Internship Program provides business and government with the opportunity to strengthen the educational process and to expand potential candidate pools for employment.« less

VIIRS Product Evaluation at the Ocean PEATE

NASA Technical Reports Server (NTRS)

Patt, Frederick S.; Feldman, Gene C.

2010-01-01

The National Polar-orbiting Operational Environmental Satellite System (NPOESS) Preparatory Project (NPP) mission will support the continuation of climate records generated from NASA missions. The NASA Science Data Segment (SDS) relies upon discipline-specific centers of expertise to evaluate the NPP data products for suitability as climate data records, The Ocean Product Evaluation and Analysis Tool Element (PEATE) will build upon Well established NASA capabilities within the Ocean Color program in order to evaluate the NPP Visible and Infrared Imager/Radiometer Suite (VIIRS) Ocean Color and Chlorophyll data products. The specific evaluation methods will support not only the evaluation of product quality but also the sources of differences with existing data records.

Architecture and Functionality of the Advanced Life Support On-Line Project Information System (OPIS)

NASA Technical Reports Server (NTRS)

Hogan, John A.; Levri, Julie A.; Morrow, Rich; Cavazzoni, Jim; Rodriquez, Luis F.; Riano, Rebecca; Whitaker, Dawn R.

2004-01-01

An ongoing effort is underway at NASA Amcs Research Center (ARC) tu develop an On-line Project Information System (OPIS) for the Advanced Life Support (ALS) Program. The objective of this three-year project is to develop, test, revise and deploy OPIS to enhance the quality of decision-making metrics and attainment of Program goals through improved knowledge sharing. OPIS will centrally locate detailed project information solicited from investigators on an annual basis and make it readily accessible by the ALS Community via a web-accessible interface. The data will be stored in an object-oriented relational database (created in MySQL(Trademark) located on a secure server at NASA ARC. OPE will simultaneously serve several functions, including being an R&TD status information hub that can potentially serve as the primary annual reporting mechanism. Using OPIS, ALS managers and element leads will be able to carry out informed research and technology development investment decisions, and allow analysts to perform accurate systems evaluations. Additionally, the range and specificity of information solicited will serve to educate technology developers of programmatic needs. OPIS will collect comprehensive information from all ALS projects as well as highly detailed information specific to technology development in each ALS area (Waste, Water, Air, Biomass, Food, Thermal, and Control). Because the scope of needed information can vary dramatically between areas, element-specific technology information is being compiled with the aid of multiple specialized working groups. This paper presents the current development status in terms of the architecture and functionality of OPIS. Possible implementation approaches for OPIS are also discussed.

Preliminary structural sizing of a Mach 3.0 high-speed civil transport model

NASA Technical Reports Server (NTRS)

Blackburn, Charles L.

1992-01-01

An analysis has been performed pertaining to the structural resizing of a candidate Mach 3.0 High Speed Civil Transport (HSCT) conceptual design using a computer program called EZDESIT. EZDESIT is a computer program which integrates the PATRAN finite element modeling program to the COMET finite element analysis program for the purpose of calculating element sizes or cross sectional dimensions. The purpose of the present report is to document the procedure used in accomplishing the preliminary structural sizing and to present the corresponding results.

Reliability analysis of laminated CMC components through shell subelement techniques

NASA Technical Reports Server (NTRS)

Starlinger, A.; Duffy, S. F.; Gyekenyesi, J. P.

1992-01-01

An updated version of the integrated design program C/CARES (composite ceramic analysis and reliability evaluation of structures) was developed for the reliability evaluation of CMC laminated shell components. The algorithm is now split in two modules: a finite-element data interface program and a reliability evaluation algorithm. More flexibility is achieved, allowing for easy implementation with various finite-element programs. The new interface program from the finite-element code MARC also includes the option of using hybrid laminates and allows for variations in temperature fields throughout the component.

Activating Technology for Connected Health in Cancer: Protocol for a Research and Training Program.

PubMed

Mountford, Nicola; Dorronzoro Zubiete, Enrique; Kessie, Threase; Garcia-Zapirain, Begonya; Nuño-Solinís, Roberto; Coyle, David; Munksgaard, Kristin B; Fernandez-Luque, Luis; Rivera Romero, Octavio; Mora Fernandez, Matilde; Valero Jimenez, Pedro; Daly, Ailish; Whelan, Ruth; Caulfield, Brian

2018-01-24

As cancer survival rates increase, the challenge of ensuring that cancer survivors reclaim their quality of life (QoL) becomes more important. This paper outlines the research element of a research and training program that is designed to do just that. Bridging sectors, disciplines, and geographies, it brings together eight PhD projects and students from across Europe to identify the underlying barriers, test different technology-enabled rehabilitative approaches, propose a model to optimize the patient pathways, and examine the business models that might underpin a sustainable approach to cancer survivor reintegration using technology. The program, funded under the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 722012, includes deep disciplinary PhD projects, intersectoral and international secondments, interdisciplinary plenary training schools, and virtual subject-specific education modules. The 8 students have now been recruited and are at the early stages of their projects. CATCH will provide a comprehensive training and research program by embracing all key elements-technical, social, and economic sciences-required to produce researchers and project outcomes that are capable of meeting existing and future needs in cancer rehabilitation. ©Nicola Mountford, Enrique Dorronzoro Zubiete, Threase Kessie, Begonya Garcia-Zapirain, Roberto Nuño-Solinís, David Coyle, Kristin B Munksgaard, Luis Fernandez-Luque, Octavio Rivera Romero, Matilde Mora Fernandez, Pedro Valero Jimenez, Ailish Daly, Ruth Whelan, Brian Caulfield. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 24.01.2018.

Development of a quality assurance program for ionizing radiation secondary calibration laboratories

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heaton, H.T. II; Taylor, A.R. Jr.

For calibration laboratories, routine calibrations of instruments meeting stated accuracy goals are important. One method of achieving the accuracy goals is to establish and follow a quality assurance program designed to monitor all aspects of the calibration program and to provide the appropriate feedback mechanism if adjustments are needed. In the United States there are a number of organizations with laboratory accreditation programs. All existing accreditation programs require that the laboratory implement a quality assurance program with essentially the same elements in all of these programs. Collectively, these elements have been designated as a Measurement Quality Assurance (MQA) program. Thismore » paper will briefly discuss the interrelationship of the elements of an MQA program. Using the Center for Devices and Radiological Health (CDRH) X-ray Calibration Laboratory (XCL) as an example, it will focus on setting up a quality control program for the equipment in a Secondary Calibration Laboratory.« less

GENSURF: A mesh generator for 3D finite element analysis of surface and corner cracks in finite thickness plates subjected to mode-1 loadings

NASA Technical Reports Server (NTRS)

Raju, I. S.

1992-01-01

A computer program that generates three-dimensional (3D) finite element models for cracked 3D solids was written. This computer program, gensurf, uses minimal input data to generate 3D finite element models for isotropic solids with elliptic or part-elliptic cracks. These models can be used with a 3D finite element program called surf3d. This report documents this mesh generator. In this manual the capabilities, limitations, and organization of gensurf are described. The procedures used to develop 3D finite element models and the input for and the output of gensurf are explained. Several examples are included to illustrate the use of this program. Several input data files are included with this manual so that the users can edit these files to conform to their crack configuration and use them with gensurf.

An On-Line Technology Information System (OTIS) for Advanced Life Support

NASA Technical Reports Server (NTRS)

Levri, Julie A.; Boulanger, Richard; Hoganm John A.; Rodriquez, Luis

2003-01-01

An On-line Technology Information System (OTIS) is currently being developed for the Advanced Life Support (ALS) Program. This paper describes the preliminary development of OTIS, which is a system designed to provide centralized collection and organization of technology information. The lack of thorough, reliable and easily understood technology information is a major obstacle in effective assessment of technology development progress, trade studies, metric calculations, and technology selection for integrated testing. OTIS will provide a formalized, well-organized protocol to communicate thorough, accurate, current and relevant technology information between the hands-on technology developer and the ALS Community. The need for this type of information transfer system within the Solid Waste Management (SWM) element was recently identified and addressed. A SWM Technology Information Form (TIF) was developed specifically for collecting detailed technology information in the area of SWM. In the TIF, information is requested from SWM technology developers, based upon the Technology Readiness Level (TRL). Basic information is requested for low-TRL technologies, and more detailed information is requested as the TRL of the technology increases. A comparable form is also being developed for the wastewater processing element. In the future, similar forms will also be developed for the ALS elements of air revitalization, food processing, biomass production and thermal control. These ALS element-specific forms will be implemented in OTIS via a web-accessible interface,with the data stored in an object-oriented relational database (created in MySQLTM) located on a secure server at NASA Ames Research Center. With OTIS, ALS element leads and managers will be able to carry out informed research and development investment, thereby promoting technology through the TRL scale. OTIS will also allow analysts to make accurate evaluations of technology options. Additionally, the range and specificity of information solicited will help educate technology developers of programmatic needs.

Applying established guidelines to team-based learning programs in medical schools: a systematic review.

PubMed

Burgess, Annette W; McGregor, Deborah M; Mellis, Craig M

2014-04-01

Team-based learning (TBL), a structured form of small-group learning, has gained popularity in medical education in recent years. A growing number of medical schools have adopted TBL in a variety of combinations and permutations across a diversity of settings, learners, and content areas. The authors conducted this systematic review to establish the extent, design, and practice of TBL programs within medical schools to inform curriculum planners and education designers. The authors searched the MEDLINE, PubMed, Web of Knowledge, and ERIC databases for articles on TBL in undergraduate medical education published between 2002 and 2012. They selected and reviewed articles that included original research on TBL programs and assessed the articles according to the seven core TBL design elements (team formation, readiness assurance, immediate feedback, sequencing of in-class problem solving, the four S's [significant problem, same problem, specific choice, and simultaneous reporting], incentive structure, and peer review) described in established guidelines. The authors identified 20 articles that satisfied the inclusion criteria. They found significant variability across the articles in terms of the application of the seven core design elements and the depth with which they were described. The majority of the articles, however, reported that TBL provided a positive learning experience for students. In the future, faculty should adhere to a standardized TBL framework to better understand the impact and relative merits of each feature of their program.

Electric Propulsion Applications and Impacts

NASA Technical Reports Server (NTRS)

Curran, Frank M.; Wickenheiser, Timothy J.

1996-01-01

Most space missions require on-board propulsion systems and these systems are often dominant spacecraft mass drivers. Presently, on-board systems account for more than half the injected mass for commercial communications systems and even greater mass fractions for ambitious planetary missions. Anticipated trends toward the use of both smaller spacecraft and launch vehicles will likely increase pressure on the performance of on-board propulsion systems. The acceptance of arcjet thrusters for operational use on commercial communications satellites ushered in a new era in on-board propulsion and exponential growth of electric propulsion across a broad spectrum of missions is anticipated. NASA recognizes the benefits of advanced propulsion and NASA's Office of Space Access and Technology supports an aggressive On-Board Propulsion program, including a strong electric propulsion element, to assure the availability of high performance propulsion systems to meet the goals of the ambitious missions envisioned in the next two decades. The program scope ranges from fundamental research for future generation systems through specific insertion efforts aimed at near term technology transfer. The On-Board propulsion program is committed to carrying technologies to levels required for customer acceptance and emphasizes direct interactions with the user community and the development of commercial sources. This paper provides a discussion of anticipated missions, propulsion functions, and electric propulsion impacts followed by an overview of the electric propulsion element of the NASA On-Board Propulsion program.

Axonal Degeneration Is Regulated by a Transcriptional Program that Coordinates Expression of Pro- and Anti-degenerative Factors.

PubMed

Maor-Nof, Maya; Romi, Erez; Sar Shalom, Hadas; Ulisse, Valeria; Raanan, Calanit; Nof, Aviv; Leshkowitz, Dena; Lang, Roland; Yaron, Avraham

2016-12-07

Developmental neuronal cell death and axonal elimination are controlled by transcriptional programs, of which their nature and the function of their components remain elusive. Here, we identified the dual specificity phosphatase Dusp16 as part of trophic deprivation-induced transcriptome in sensory neurons. Ablation of Dusp16 enhanced axonal degeneration in response to trophic withdrawal, suggesting that it has a protective function. Moreover, axonal skin innervation was severely reduced while neuronal elimination was increased in the Dusp16 knockout. Mechanistically, Dusp16 negatively regulates the transcription factor p53 and antagonizes the expression of the pro-degenerative factor, Puma (p53 upregulated modulator of apoptosis). Co-ablation of Puma with Dusp16 protected axons from rapid degeneration and specifically reversed axonal innervation loss early in development with no effect on neuronal deficits. Overall, these results reveal that physiological axonal elimination is regulated by a transcriptional program that integrates regressive and progressive elements and identify Dusp16 as a new axonal preserving factor. Copyright © 2016 Elsevier Inc. All rights reserved.

Infrastructure for Automatic Dynamic Deployment of J2EE Applications in Distributed Environments

DTIC Science & Technology

2005-01-01

5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S...AND ADDRESS(ES) Defense Advanced Research Projects Agency,3701 North Fairfax Drive,Arlington,VA,22203-1714 8. PERFORMING ORGANIZATION REPORT...the paper is organized as follows. Section 2 provides necessary background for understanding the specifics of the J2EE component technology which are

The NASA role in major areas of human concern: Health care

NASA Technical Reports Server (NTRS)

Freeman, J. E.; Kottenstette, J. P.; Rusnak, J. J.

1973-01-01

Benefits derived from the civilian aeronautics and space effort are discussed in a statement whose focus is on the developments in health care which can be traced to specific NASA program elements. A summary is provided for each case where NASA has been involved in expanding the biomedical technical base, as well as where NASA has been directly instrumental in providing solutions in maintaining adequate health, and correcting health problems when they occur.

Improving the Selection, Classification, and Utilization of Army Enlisted Personnel. Annual Report, 1985 Fiscal Year. Supplement

DTIC Science & Technology

1987-10-01

PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT, PROJECT, TASK Human Resources Research Organization 2 P 3 QA2 79 9"INiTNUMBERS 1100...classification tests which will validly predict carefully developed measures of job performance . The project addresses the 675,000-person enlisted personnel...are to include both Army-wide job performance measures based on newly developed rating scales, and direct hands-on measures of MOS-specific task

Particle Tracking Model Transport Process Verification: Diffusion Algorithm

DTIC Science & Technology

2015-07-01

sediment densities in space and time along with final particle fates (Demirbilek et al. 2004; Davies et al. 2005; McDonald et al. 2006; Lackey and... McDonald 2007). Although a versatile model currently utilized in various coastal, estuarine, and riverine applications, PTM is specifically designed to...Algorithm 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7

Scope Complexity Options Risks Excursions (SCORE) Factor Mathematical Description.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gearhart, Jared Lee; Samberson, Jonell Nicole; Shettigar, Subhasini

The purpose of the Scope, Complexity, Options, Risks, Excursions (SCORE) model is to estimate the relative complexity of design variants of future warhead options, resulting in scores. SCORE factors extend this capability by providing estimates of complexity relative to a base system (i.e., all design options are normalized to one weapon system). First, a clearly defined set of scope elements for a warhead option is established. The complexity of each scope element is estimated by Subject Matter Experts (SMEs), including a level of uncertainty, relative to a specific reference system. When determining factors, complexity estimates for a scope element canmore » be directly tied to the base system or chained together via comparable scope elements in a string of reference systems that ends with the base system. The SCORE analysis process is a growing multi-organizational Nuclear Security Enterprise (NSE) effort, under the management of the NA-12 led Enterprise Modeling and Analysis Consortium (EMAC). Historically, it has provided the data elicitation, integration, and computation needed to support the out-year Life Extension Program (LEP) cost estimates included in the Stockpile Stewardship Management Plan (SSMP).« less

Massive contribution of transposable elements to mammalian regulatory sequences.

PubMed

Rayan, Nirmala Arul; Del Rosario, Ricardo C H; Prabhakar, Shyam

2016-09-01

Barbara McClintock discovered the existence of transposable elements (TEs) in the late 1940s and initially proposed that they contributed to the gene regulatory program of higher organisms. This controversial idea gained acceptance only much later in the 1990s, when the first examples of TE-derived promoter sequences were uncovered. It is now known that half of the human genome is recognizably derived from TEs. It is thus important to understand the scope and nature of their contribution to gene regulation. Here, we provide a timeline of major discoveries in this area and discuss how transposons have revolutionized our understanding of mammalian genomes, with a special emphasis on the massive contribution of TEs to primate evolution. Our analysis of primate-specific functional elements supports a simple model for the rate at which new functional elements arise in unique and TE-derived DNA. Finally, we discuss some of the challenges and unresolved questions in the field, which need to be addressed in order to fully characterize the impact of TEs on gene regulation, evolution and disease processes. Copyright © 2016 Elsevier Ltd. All rights reserved.

The elements of a consumer-based initiative in contributing to positive environmental change: Monterey Bay Aquarium's Seafood Watch program.

PubMed

Kemmerly, Jennifer Dianto; Macfarlane, Victoria

2009-09-01

Monterey Bay Aquarium launched the Seafood Watch program in 2000. The program's Seafood Watch pocket guide is a simple tool that visitors can use to identify seafood from environmentally responsible sources. Since its inception, more than 2 million pocket guides have been distributed to Monterey Bay Aquarium visitors and 20 million have been distributed through partnerships across the United States. Partner institutions such as aquariums, conservation organizations, and businesses also conduct outreach and are working to influence their local seafood purveyors. An evaluation conducted in 2003 and 2004 assessed the program's strategies for increasing awareness and shifting consumer buying habits as they relate to sustainable seafood, including use of the pocket guide. Visitors who picked up pocket guides were surveyed immediately after their aquarium visit, and again four months later. The evaluation found that most visitors continued to use the guides and had changed their seafood buying habits in several respects. Those interviewed also reported some barriers to using the guides. The elements that appear to be critical to the success of the strategy with respect to changing consumer purchasing habits include: a focused distribution approach; providing credible and specific information on problems and solutions to increase action-related knowledge; providing a trigger or prompt that is available at the time of purchase; and reducing barriers to action, at the point of action, by working with seafood purveyors and the broader sustainable seafood movement to increase knowledge and available options. In response to the evaluation, Seafood Watch has strengthened these elements and expanded to help meet the needs of the broader sustainable seafood movement. A process of strategic planning, evaluation, cooperation among partners, and adaptability to the movement's natural evolution has proven to be critical to the program's success in contributing to the development of a marketplace for sustainable seafood.

JPL-IDEAS - ITERATIVE DESIGN OF ANTENNA STRUCTURES

NASA Technical Reports Server (NTRS)

Levy, R.

1994-01-01

The Iterative DEsign of Antenna Structures (IDEAS) program is a finite element analysis and design optimization program with special features for the analysis and design of microwave antennas and associated sub-structures. As the principal structure analysis and design tool for the Jet Propulsion Laboratory's Ground Antenna and Facilities Engineering section of NASA's Deep Space Network, IDEAS combines flexibility with easy use. The relatively small bending stiffness of the components of large, steerable reflector antennas allows IDEAS to use pinjointed (three translational degrees of freedom per joint) models for modeling the gross behavior of these antennas when subjected to static and dynamic loading. This facilitates the formulation of the redesign algorithm which has only one design variable per structural element. Input data deck preparation has been simplified by the use of NAMELIST inputs to promote clarity of data input for problem defining parameters, user selection of execution and design options and output requests, and by the use of many attractive and familiar features of the NASTRAN program (in many cases, NASTRAN and IDEAS formatted bulk data cards are interchangeable). Features such as simulation of a full symmetric structure based on analyses of only half the structure make IDEAS a handy and efficient analysis tool, with many features unavailable in any other finite element analysis program. IDEAS can choose design variables such as areas of rods and thicknesses of plates to minimize total structure weight, constrain the structure weight to a specified value while maximizing a natural frequency or minimizing compliance measures, and can use a stress ratio algorithm to size each structural member so that it is at maximum or minimum stress level for at least one of the applied loads. Calculations of total structure weight can be broken down according to material. Center of gravity weight balance, static first and second moments about the center of mass and optionally about a user-specified gridpoint, and lumped structure weight at grid points can also be calculated. Other analysis outputs include calculation of reactions, displacements, and element stresses due to specified gravity, thermal, and external applied loads; calculations of linear combinations of specific node displacements (e.g. to represent motions of rigid attachments not included in the structure model), natural frequency eigenvalues and eigenvectors, structure reactions and element stresses, and coordinates of effective modal masses. Cassegrain antenna boresight error analysis of a best fitting paraboloid and Cassegrain microwave antenna root mean square half-pathlength error analysis of a best fitting paraboloid are also performed. The IDEAS program is written in ATHENA FORTRAN and ASSEMBLER for an EXEC 8 operating system and was implemented on a UNIVAC 1100 series computer. The minimum memory requirement for the program is approximately 42,000 36-bit words. This program is available on a 9-track 1600 BPI magnetic tape in UNIVAC FURPUR format only; since JPL-IDEAS will not run on other platforms, COSMIC will not reformat the code to be readable on other platforms. The program was developed in 1988.

Contemporary Issues in Science. Implementation Manual.

ERIC Educational Resources Information Center

Staten Island Continuum of Education, NY.

Contemporary Issues in Science Program (CIIS) is designed to provide teachers and students with the necessary tools and strategies for bringing contemporary scientific issues into the classroom. Provided in this document are discussions of the three major elements in the program, support elements, and major activities. Major elements include the…

Finite element meshing of ANSYS (trademark) solid models

NASA Technical Reports Server (NTRS)

Kelley, F. S.

1987-01-01

A large scale, general purpose finite element computer program, ANSYS, developed and marketed by Swanson Analysis Systems, Inc. is discussed. ANSYS was perhaps the first commercially available program to offer truly interactive finite element model generation. ANSYS's purpose is for solid modeling. This application is briefly discussed and illustrated.

WE-A-BRE-01: Debate: To Measure or Not to Measure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moran, J; Miften, M; Mihailidis, D

2014-06-15

Recent studies have highlighted some of the limitations of patient-specific pre-treatment IMRT QA measurements with respect to assessing plan deliverability. Pre-treatment QA measurements are frequently performed with detectors in phantoms that do not involve any patient heterogeneities or with an EPID without a phantom. Other techniques have been developed where measurement results are used to recalculate the patient-specific dose volume histograms. Measurements continue to play a fundamental role in understanding the initial and continued performance of treatment planning and delivery systems. Less attention has been focused on the role of computational techniques in a QA program such as calculation withmore » independent dose calculation algorithms or recalculation of the delivery with machine log files or EPID measurements. This session will explore the role of pre-treatment measurements compared to other methods such as computational and transit dosimetry techniques. Efficiency and practicality of the two approaches will also be presented and debated. The speakers will present a history of IMRT quality assurance and debate each other regarding which types of techniques are needed today and for future quality assurance. Examples will be shared of situations where overall quality needed to be assessed with calculation techniques in addition to measurements. Elements where measurements continue to be crucial such as for a thorough end-to-end test involving measurement will be discussed. Operational details that can reduce the gamma tool effectiveness and accuracy for patient-specific pre-treatment IMRT/VMAT QA will be described. Finally, a vision for the future of IMRT and VMAT plan QA will be discussed from a safety perspective. Learning Objectives: Understand the advantages and limitations of measurement and calculation approaches for pre-treatment measurements for IMRT and VMAT planning Learn about the elements of a balanced quality assurance program involving modulated techniques Learn how to use tools and techniques such as an end-to-end test to enhance your IMRT and VMAT QA program.« less

The Complexity of Leveraging University Program Change

ERIC Educational Resources Information Center

Crow, Gary M.; Arnold, Noelle Witherspoon; Reed, Cynthia J.; Shoho, Alan R.

2012-01-01

This article identifies four elements of complexity that influence how university educational leadership programs can leverage program change: faculty reward systems, faculty governance, institutional resources, and state-level influence on leadership preparation. Following the discussion of the elements of complexity, the article provides a…

40 CFR 281.21 - Description of state program.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., and one state agency designated as a “lead agency” to facilitate communications between EPA and the state. (c) Staff resources to carry out and enforce the required state program elements, both existing... program elements, and any restrictions or limitations upon this funding. ...

Summary of Liquid Oxygen/Hydrogen, Direct Metal Laser Sintering Injector Testing and Evaluation Effort at Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Barnett, Gregory; Bullard, David B.

2015-01-01

The last several years have witnessed a significant advancement in the area of additive manufacturing technology. One area that has seen substantial expansion in application has been laser sintering (or melting) in a powder bed. This technology is often termed 3D printing or various acronyms that may be industry, process, or company specific. Components manufactured via 3D printing have the potential to significantly reduce development and fabrication time and cost. The usefulness of 3D printed components is influenced by several factors such as material properties and surface roughness. This paper details three injectors that were designed, fabricated, and tested in order to evaluate the utility of 3D printed components for rocket engine applications. The three injectors were tested in a hot-fire environment with chamber pressures of approximately 1400 psia. One injector was a 28 element design printed by Directed Manufacturing. The other two injectors were identical 40 element designs printed by Directed Manufacturing and Solid Concepts. All the injectors were swirl-coaxial designs and were subscale versions of a full-scale injector currently in fabrication. The test and evaluation programs for the 28 element and 40 element injectors provided a substantial amount of data that confirms the feasibility of 3D printed parts for future applications. The operating conditions of previously tested, conventionally manufactured injectors were reproduced in the 28 and 40 element programs in order to contrast the performance of each. Overall, the 3D printed injectors demonstrated comparable performance to the conventionally manufactured units. The design features of the aforementioned injectors can readily be implemented in future applications with a high degree of confidence.

Ceramic component reliability with the restructured NASA/CARES computer program

NASA Technical Reports Server (NTRS)

Powers, Lynn M.; Starlinger, Alois; Gyekenyesi, John P.

1992-01-01

The Ceramics Analysis and Reliability Evaluation of Structures (CARES) integrated design program on statistical fast fracture reliability and monolithic ceramic components is enhanced to include the use of a neutral data base, two-dimensional modeling, and variable problem size. The data base allows for the efficient transfer of element stresses, temperatures, and volumes/areas from the finite element output to the reliability analysis program. Elements are divided to insure a direct correspondence between the subelements and the Gaussian integration points. Two-dimensional modeling is accomplished by assessing the volume flaw reliability with shell elements. To demonstrate the improvements in the algorithm, example problems are selected from a round-robin conducted by WELFEP (WEakest Link failure probability prediction by Finite Element Postprocessors).

Modular space station, phase B extension. Program operations plan

NASA Technical Reports Server (NTRS)

1971-01-01

An organized approach is defined for establishing the most significant requirements pertaining to mission operations, information management, and computer program design and development for the modular space station program. The operations plan pertains to the space station and experiment module program elements and to the ground elements required for mission management and mission support operations.

Computer aided stress analysis of long bones utilizing computer tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marom, S.A.

1986-01-01

A computer aided analysis method, utilizing computed tomography (CT) has been developed, which together with a finite element program determines the stress-displacement pattern in a long bone section. The CT data file provides the geometry, the density and the material properties for the generated finite element model. A three-dimensional finite element model of a tibial shaft is automatically generated from the CT file by a pre-processing procedure for a finite element program. The developed pre-processor includes an edge detection algorithm which determines the boundaries of the reconstructed cross-sectional images of the scanned bone. A mesh generation procedure than automatically generatesmore » a three-dimensional mesh of a user-selected refinement. The elastic properties needed for the stress analysis are individually determined for each model element using the radiographic density (CT number) of each pixel with the elemental borders. The elastic modulus is determined from the CT radiographic density by using an empirical relationship from the literature. The generated finite element model, together with applied loads, determined from existing gait analysis and initial displacements, comprise a formatted input for the SAP IV finite element program. The output of this program, stresses and displacements at the model elements and nodes, are sorted and displayed by a developed post-processor to provide maximum and minimum values at selected locations in the model.« less

New optomechanical approach to quantitative characterization of fatigue behavior of dynamically loaded structures

NASA Astrophysics Data System (ADS)

Furlong, Cosme; Pryputniewicz, Ryszard J.

1995-06-01

The basic relationships between stress and strain under cyclic conditions of loading are not at present well understood. It would seem that information of this type is vital for a fundamental approach to understand the fatigue behavior of dynamically loaded structures. In this paper, experimental and computational methods are utilized to study the fatigue behavior of a thin aluminum cantilever plate subjected to dynamic loading. The studies are performed by combining optomechanical and finite element methods. The cantilever plate is loaded periodically by excitation set at a fixed amplitude and at a specific resonance frequency of the plate. By continuously applying this type of loading and using holographic interferometry, the behavior of the plate during a specific period of time is investigated. Quantitative information is obtained from laser vibrometry data which are utilized by a finite element program to calculate strains and stresses assuming a homogeneous and isotropic material and constant strain elements. It is shown that the use of experimental and computational hybrid methodologies allows identification of different zones of the plate that are fatigue critical. This optomechanical approach proves to be a viable tool for understanding of fatigue behavior of mechanical components and for performing optimization of structures subjected to fatigue conditions.

Development of an integrated transuranic waste management system for a large research facility: NUCEF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mineo, Hideaki; Matsumura, Tatsuro; Takeshita, Isao

1997-03-01

The Nuclear Fuel Cycle Safety Engineering Research Facility (NUCEF) is a large complex of research facilities where transuranic (TRU) elements are used. Liquid and solid waste containing TRU elements is generated mainly in the treatment of fuel for critical experiments and in the research of reprocessing and TRU waste management in hot cells and glove boxes. The rational management of TRU wastes is a very important issue not only for NUCEF but also for Japan. An integrated TRU waste management system is being developed with NUCEF as the test bed. The basic policy for establishing the system is to classifymore » wastes by TRU concentration, to reduce waste volume, and to maximize reuse of TRU elements. The principal approach of the development program is to apply the outcomes of the research carried out in NUCEF. Key technologies are TRU measurement for classification of solid wastes and TRU separation and volume reduction for organic and aqueous wastes. Some technologies required for treating the wastes specific to the research activities in NUCEF need further development. Specifically, the separation and stabilization technologies for americium recovery from concentrated aqueous waste, which is generated in dissolution of mixed oxide when preparing fuel for critical experiments, needs further research.« less

Numerical aerodynamic simulation facility. Preliminary study extension

NASA Technical Reports Server (NTRS)

1978-01-01

The production of an optimized design of key elements of the candidate facility was the primary objective of this report. This was accomplished by effort in the following tasks: (1) to further develop, optimize and describe the function description of the custom hardware; (2) to delineate trade off areas between performance, reliability, availability, serviceability, and programmability; (3) to develop metrics and models for validation of the candidate systems performance; (4) to conduct a functional simulation of the system design; (5) to perform a reliability analysis of the system design; and (6) to develop the software specifications to include a user level high level programming language, a correspondence between the programming language and instruction set and outline the operation system requirements.

Quantum field theory and the linguistic Minimalist Program: a remarkable isomorphism

NASA Astrophysics Data System (ADS)

Piattelli-Palmarini, M.; Vitiello, G.

2017-08-01

By resorting to recent results, we show that an isomorphism exist between linguistic features of the Minimalist Program and the quantum field theory formalism of condensed matter physics. Specific linguistic features which admit a representation in terms of the many-body algebraic formalism are the unconstrained nature of recursive Merge, the operation of the Labeling Algorithm, the difference between pronounced and un-pronounced copies of elements in a sentence and the build-up of the Fibonacci sequence in the syntactic derivation of sentence structures. The collective dynamical nature of the formation process of Logical Forms leading to the individuation of the manifold of concepts and the computational self-consistency of languages are also discussed.

Test and Verification Approach for the NASA Constellation Program

NASA Technical Reports Server (NTRS)

Strong, Edward

2008-01-01

This viewgraph presentation is a test and verification approach for the NASA Constellation Program. The contents include: 1) The Vision for Space Exploration: Foundations for Exploration; 2) Constellation Program Fleet of Vehicles; 3) Exploration Roadmap; 4) Constellation Vehicle Approximate Size Comparison; 5) Ares I Elements; 6) Orion Elements; 7) Ares V Elements; 8) Lunar Lander; 9) Map of Constellation content across NASA; 10) CxP T&V Implementation; 11) Challenges in CxP T&V Program; 12) T&V Strategic Emphasis and Key Tenets; 13) CxP T&V Mission & Vision; 14) Constellation Program Organization; 15) Test and Evaluation Organization; 16) CxP Requirements Flowdown; 17) CxP Model Based Systems Engineering Approach; 18) CxP Verification Planning Documents; 19) Environmental Testing; 20) Scope of CxP Verification; 21) CxP Verification - General Process Flow; 22) Avionics and Software Integrated Testing Approach; 23) A-3 Test Stand; 24) Space Power Facility; 25) MEIT and FEIT; 26) Flight Element Integrated Test (FEIT); 27) Multi-Element Integrated Testing (MEIT); 28) Flight Test Driving Principles; and 29) Constellation s Integrated Flight Test Strategy Low Earth Orbit Servicing Capability.

1995 NASA High-Speed Research Program Sonic Boom Workshop. Volume 2; Configuration Design, Analysis, and Testing

NASA Technical Reports Server (NTRS)

Baize, Daniel G. (Editor)

1999-01-01

The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Sonic Boom Workshop on September 12-13, 1995. The workshop was designed to bring together NASAs scientists and engineers and their counterparts in industry, other Government agencies, and academia working together in the sonic boom element of NASAs High-Speed Research Program. Specific objectives of this workshop were to: (1) report the progress and status of research in sonic boom propagation, acceptability, and design; (2) promote and disseminate this technology within the appropriate technical communities; (3) help promote synergy among the scientists working in the Program; and (4) identify technology pacing, the development C, of viable reduced-boom High-Speed Civil Transport concepts. The Workshop was organized in four sessions: Sessions 1 Sonic Boom Propagation (Theoretical); Session 2 Sonic Boom Propagation (Experimental); Session 3 Acceptability Studies-Human and Animal; and Session 4 - Configuration Design, Analysis, and Testing.

Tackling NCD in LMIC: Achievements and Lessons Learned From the NHLBI-UnitedHealth Global Health Centers of Excellence Program.

PubMed

Engelgau, Michael M; Sampson, Uchechukwu K; Rabadan-Diehl, Cristina; Smith, Richard; Miranda, Jaime; Bloomfield, Gerald S; Belis, Deshiree; Narayan, K M Venkat

2016-03-01

Effectively tackling the growing noncommunicable disease (NCD) burden in low- and middle-income countries (LMIC) is a major challenge. To address research needs in this setting for NCDs, in 2009, National Heart, Lung, and Blood Institute (NHLBI) and UnitedHealth Group (UHG) engaged in a public-private partnership that supported a network of 11 LMIC-based research centers and created the NHLBI-UnitedHealth Global Health Centers of Excellence (COE) Program. The Program's overall goal was to contribute to reducing the cardiovascular and lung disease burdens by catalyzing in-country research institutions to develop a global network of biomedical research centers. Key elements of the Program included team science and collaborative approaches, developing research and training platforms for future investigators, and creating a data commons. This Program embraced a strategic approach for tackling NCDs in LMICs and will provide capacity for locally driven research efforts that can identify and address priority health issues in specific countries' settings. Published by Elsevier B.V.

Characteristics of effective family medicine faculty development programs.

PubMed

Bland, C J; Stritter, F T

1988-01-01

Five federally funded family medicine faculty development programs were site visited from December 1985 to June 1986 to collect from experienced project directors, staff, and faculty their thoughts on training practices and future funding. The sites selected were the Faculty Development Center of Texas in Waco (McLennan County Medical Education and Research Foundation), the National Center for Faculty Development at the University of Miami, and programs at Michigan State University, the University of North Carolina-Chapel Hill, and Duke University. Since the late 1970s these programs have trained 259 fellows and 3,284 other participants. In total, $7,515,350 in federal dollars were spent. A variety of program formats and strategies were used to recruit faculty, and to prepare them in teaching, research, and other skill areas. Interviews (as well as phone conversations and letters) with key personnel at each site resulted in a summary of 30 critical elements identified for effective faculty development. Additionally, respondents made 11 specific recommendations to the Federal Faculty Development Grant Program that concern funding and future programs.

A cost-benefit analysis of a deposit-refund program for beverage containers in Israel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lavee, Doron, E-mail: doron@pareto.co.i

2010-02-15

The paper presents a full cost-benefit analysis of a deposit-refund program for beverage containers in Israel. We examine all cost elements of the program - storage, collection, and treatment costs of empty containers, and all potential benefits - savings in alternative treatment costs (waste collection and landfill disposal), cleaner public spaces, reduction of landfill volumes, energy-savings externalities associated with use of recycled materials, and creation of new workplaces. A wide variety of data resources is employed, and some of the critical issues are examined via several approaches. The main finding of the paper is that the deposit-refund program is clearlymore » economically worthwhile. The paper contributes to the growing body of literature on deposit-refund programs by its complete and detailed analysis of all relevant factors of such a program, and also specifically in its analysis of the savings in alternative waste management costs. This analysis reveals greater savings than are usually assumed, and thus shows the deposit-refund program to be highly efficient.« less

78 FR 73525 - Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) or Superfund...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-06

.... demonstrate that its response program includes, or is taking reasonable steps to include, the four elements of.... Achievement of the four elements should be viewed as a priority. Section 128(a) authorizes funding for... record requirement. The four elements of a response program are described below: 1. Timely survey and...

The Study Abroad Experience: A Crucial Element in Globalizing Business School Programs

ERIC Educational Resources Information Center

Mangiero, George A.; Kraten, Michael

2011-01-01

Globalization is a fundamental reality of modern business practice. Participation in a study abroad program is a crucial element in helping students become well rounded global business leaders; it is an increasingly important element of a well rounded business curriculum. A semester or summer abroad, properly conceived and designed, can provide…

40 CFR 501.11 - Elements of a sludge management program submission.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Elements of a sludge management program submission. 501.11 Section 501.11 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STATE SLUDGE MANAGEMENT PROGRAM REGULATIONS Development and Submission of State...

METHOD AND APPARATUS FOR TESTING THE PRESENCE OF SPECIFIC ATOMIC ELEMENTS IN A SUBSTANCE

DOEpatents

Putman, J.L.

1960-01-26

Detection of specific atomic elements in a substance and particularly the applicability to well logging are discussed. The principal novelty resides in the determination of several of the auxiliary energy peaks in addition to the main energy peak of the gamma-ray energy spectrum of a substance and comparison of such peaks to the spectrum of the specific atomic element being tested for. thus resulting in identification of same. The invention facilitates the identification of specific elements even when in the presence of other elements having similar gamma energy spectra as to the main energy peaks.

Chemically programmed ink-jet printed resistive WORM memory array and readout circuit

NASA Astrophysics Data System (ADS)

Andersson, H.; Manuilskiy, A.; Sidén, J.; Gao, J.; Hummelgård, M.; Kunninmel, G. V.; Nilsson, H.-E.

2014-09-01

In this paper an ink-jet printed write once read many (WORM) resistive memory fabricated on paper substrate is presented. The memory elements are programmed for different resistance states by printing triethylene glycol monoethyl ether on the substrate before the actual memory element is printed using silver nano particle ink. The resistance is thus able to be set to a broad range of values without changing the geometry of the elements. A memory card consisting of 16 elements is manufactured for which the elements are each programmed to one of four defined logic levels, providing a total of 4294 967 296 unique possible combinations. Using a readout circuit, originally developed for resistive sensors to avoid crosstalk between elements, a memory card reader is manufactured that is able to read the values of the memory card and transfer the data to a PC. Such printed memory cards can be used in various applications.

Flutter: A finite element program for aerodynamic instability analysis of general shells of revolution with thermal prestress

NASA Technical Reports Server (NTRS)

Fallon, D. J.; Thornton, E. A.

1983-01-01

Documentation for the computer program FLUTTER is presented. The theory of aerodynamic instability with thermal prestress is discussed. Theoretical aspects of the finite element matrices required in the aerodynamic instability analysis are also discussed. General organization of the computer program is explained, and instructions are then presented for the execution of the program.

An Interactive Preprocessor Program with Graphics for a Three-Dimensional Finite Element Code.

ERIC Educational Resources Information Center

Hamilton, Claude Hayden, III

The development and capabilities of an interactive preprocessor program with graphics for an existing three-dimensional finite element code is presented. This preprocessor program, EDGAP3D, is designed to be used in conjunction with the Texas Three Dimensional Grain Analysis Program (TXCAP3D). The code presented in this research is capable of the…

NASA Early Career Fellowship Program

NASA Astrophysics Data System (ADS)

Smith, H. D.

2012-12-01

The Early Career Fellowship program was established in 2005 to facilitate the integration of outstanding early career planetary science researchers into established research funding programs by providing tools and experience useful to maintain a successful research program. Executing a successful research program requires a few key elements such as: successful proposal writing; adequate (paid) research time; management of a laboratory; collaboration and networking; frequent and high-quality publications; and adequate start-up equipment funds. These elements may be particularly critical for early career researchers searching for a tenure- track or equivalent position. The Early Career Fellowship program recognizes the importance of these skills and provides extra funding and resources to begin a successful research program. For consideration into The Early Career Fellowship program, the candidate needs to be the P. I. or Science P.I. of a funded research proposal from one of the participating R&A program areas, be within 7 years of earning a PhD, hold a non-tenure track position, and indicate the early career candidacy when submitting the research proposal. If the research proposal is funded and the discipline scientist nominates the candidate as an early career fellow, the candidate is then considered a Fellow and eligible to propose for Step 2. Upon obtaining a tenure-track equivalent position the Fellow submits a Step 2 proposal for up to one hundred thousand dollars in start-up funds. Start-up funds may be used for salary; undergraduate and/or graduate research assistants; supplies and instrument upgrades; travel to conferences, meetings, and advisory groups; time and travel for learning new skills; publication page charges; books and journal subscriptions; computer time and/or specialized software; and other justified research-specific needs. The early career fellowship program provides resources that a more established scientist would have acquired allowing the Fellow to be a better job applicant. NASA opportunities from the undergraduate to postdoctoral level are also discussed.

Q3DG: A computer program for strain-energy-release rates for delamination growth in composite laminates

NASA Technical Reports Server (NTRS)

Raju, I. S.

1986-01-01

The Q3DG is a computer program developed to perform a quasi-three-dimensional stress analysis for composite laminates which may contain delaminations. The laminates may be subjected to mechanical, thermal, and hygroscopic loads. The program uses the finite element method and models the laminates with eight-noded parabolic isoparametric elements. The program computes the strain-energy-release components and the total strain-energy release in all three modes for delamination growth. A rectangular mesh and data file generator, DATGEN, is included. The DATGEN program can be executed interactively and is user friendly. The documentation includes sections dealing with the Q3D analysis theory, derivation of element stiffness matrices and consistent load vectors for the parabolic element. Several sample problems with the input for Q3DG and output from the program are included. The capabilities of the DATGEN program are illustrated with examples of interactive sessions. A microfiche of all the examples is included. The Q3DG and DATGEN programs have been implemented on CYBER 170 class computers. Q3DG and DATGEN were developed at the Langley Research Center during the early eighties and documented in 1984 to 1985.

Analysis of Space Shuttle Ground Support System Fault Detection, Isolation, and Recovery Processes and Resources

NASA Technical Reports Server (NTRS)

Gross, Anthony R.; Gerald-Yamasaki, Michael; Trent, Robert P.

2009-01-01

As part of the FDIR (Fault Detection, Isolation, and Recovery) Project for the Constellation Program, a task was designed within the context of the Constellation Program FDIR project called the Legacy Benchmarking Task to document as accurately as possible the FDIR processes and resources that were used by the Space Shuttle ground support equipment (GSE) during the Shuttle flight program. These results served as a comparison with results obtained from the new FDIR capability. The task team assessed Shuttle and EELV (Evolved Expendable Launch Vehicle) historical data for GSE-related launch delays to identify expected benefits and impact. This analysis included a study of complex fault isolation situations that required a lengthy troubleshooting process. Specifically, four elements of that system were considered: LH2 (liquid hydrogen), LO2 (liquid oxygen), hydraulic test, and ground special power.

Trajectory determinations and collection of micrometeoroids on the space station. Report of the Workshop on Micrometeorite Capture Experiments

NASA Technical Reports Server (NTRS)

Hoerz, F. (Editor)

1986-01-01

Summaries of papers presented at the Workshop on Micrometeorite Capture Experiments are compiled. The goals of the workshop were to define the scientific objectives and the resulting performance requirements of a potential Space Station facility and to identify the major elements of a coherent development program that would generate the desired capabilities within the next decade. Specific topics include cosmic dust and space debris collection techniques, particle trajectory and source determination, and specimen analysis methods.