Sample records for specific quality control

  1. 7 CFR 1728.202 - RUS Bulletin 1728H-702, RUS Specification for Quality Control and Inspection of Timber Products.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... calendar year. (2) Ultimate quality control is the responsibility of the producer's management; however, a... 7 Agriculture 11 2010-01-01 2010-01-01 false RUS Bulletin 1728H-702, RUS Specification for Quality... for Quality Control and Inspection of Timber Products. (a) Scope. This specification describes in more...

  2. Mental health issues decrease diabetes-specific quality of life independent of glycaemic control and complications: findings from Australia’s living with diabetes cohort study

    PubMed Central

    2013-01-01

    Background While factors associated with health-related quality of life for people with chronic diseases including diabetes are well researched, far fewer studies have investigated measures of disease-specific quality of life. The purpose of this study is to assess the impact of complications and comorbidities on diabetes-specific quality of life in a large population-based cohort of type 2 diabetic patients. Methods The Living with Diabetes Study recruited participants from the National Diabetes Services Scheme in Australia. Data were collected via a mailed self-report questionnaire. Diabetes-specific quality of life was measured using the Audit of Diabetes-Dependent Quality of Life (ADDQoL) questionnaire. The analyses are for 3609 patients with type 2 diabetes. Regression models with adjustment for control variables investigated the association of complications and comorbidities with diabetes-specific quality of life. Next, the most parsimonious model for diabetes-specific quality of life after controlling for important covariates was examined. Results The expected associations with better diabetes-specific quality of life were evident, such as increased income, not on insulin, better glycaemic control and older age. However, being single and having been diagnosed with cancer were also associated with better ADDQoL. Additionally, poorer diabetes-specific quality of life was strongly sensitive to the presence of diabetes complications and mental health conditions such as depression, anxiety and schizophrenia. These relationships persisted after adjustment for gender, age, duration of diabetes, treatment regimen, sampling region and other treatment and socio-demographic variables. Conclusions A greater appreciation of the complexities of diabetes-specific quality of life can help tailor disease management and self-care messages given to patients. Attention to mental health issues may be as important as focusing on glycaemic control and complications. Therefore clinicians’ ability to identify and mange mental health issues and/or refer patients is critical to improving patients’ diabetes-specific quality of life. PMID:24131673

  3. Effectiveness Comparison of TxDOT Quality Control/Quality Assurance and Method Specifications

    DOT National Transportation Integrated Search

    1998-12-01

    Original Report date: October 1997. This is the first and final report for research project 0-1721, "Effectiveness Comparison of TxDOT Quality Control/Quality Assurance and Method Specifications." This study was established and sponsored by TxDOT to ...

  4. A Quality Assurance Initiative for Commercial-Scale Production in High-Throughput Cryopreservation of Blue Catfish Sperm

    PubMed Central

    Hu, E; Liao, T. W.; Tiersch, T. R.

    2013-01-01

    Cryopreservation of fish sperm has been studied for decades at a laboratory (research) scale. However, high-throughput cryopreservation of fish sperm has recently been developed to enable industrial-scale production. This study treated blue catfish (Ictalurus furcatus) sperm high-throughput cryopreservation as a manufacturing production line and initiated quality assurance plan development. The main objectives were to identify: 1) the main production quality characteristics; 2) the process features for quality assurance; 3) the internal quality characteristics and their specification designs; 4) the quality control and process capability evaluation methods, and 5) the directions for further improvements and applications. The essential product quality characteristics were identified as fertility-related characteristics. Specification design which established the tolerance levels according to demand and process constraints was performed based on these quality characteristics. Meanwhile, to ensure integrity throughout the process, internal quality characteristics (characteristics at each quality control point within process) that could affect fertility-related quality characteristics were defined with specifications. Due to the process feature of 100% inspection (quality inspection of every fish), a specific calculation method, use of cumulative sum (CUSUM) control charts, was applied to monitor each quality characteristic. An index of overall process evaluation, process capacity, was analyzed based on in-control process and the designed specifications, which further integrates the quality assurance plan. With the established quality assurance plan, the process could operate stably and quality of products would be reliable. PMID:23872356

  5. Multicriteria Gain Tuning for Rotorcraft Flight Controls (also entitled The Development of the Conduit Advanced Control System Design and Evaluation Interface with a Case Study Application Fly by Wire Helicopter Design)

    NASA Technical Reports Server (NTRS)

    Biezad, Daniel

    1997-01-01

    Handling qualities analysis and control law design would seem to be naturally complimenting components of aircraft flight control system design, however these two closely coupled disciplines are often not well integrated in practice. Handling qualities engineers and control system engineers may work in separate groups within an aircraft company. Flight control system engineers and handling quality specialists may come from different backgrounds and schooling and are often not aware of the other group's research. Thus while the handling qualities specifications represent desired aircraft response characteristics, these are rarely incorporated directly in the control system design process. Instead modem control system design techniques are based on servo-loop robustness specifications, and simple representations of the desired control response. Comprehensive handling qualities analysis is often left until the end of the design cycle and performed as a check of the completed design for satisfactory performance. This can lead to costly redesign or less than satisfactory aircraft handling qualities when the flight testing phase is reached. The desire to integrate the fields of handling qualities and flight,control systems led to the development of the CONDUIT system. This tool facilitates control system designs that achieve desired handling quality requirements and servo-loop specifications in a single design process. With CONDUIT, the control system engineer is now able to directly design and control systems to meet the complete handling specifications. CONDUIT allows the designer to retain a preferred control law structure, but then tunes the system parameters to meet the handling quality requirements.

  6. Patient-specific dosimetric endpoints based treatment plan quality control in radiotherapy.

    PubMed

    Song, Ting; Staub, David; Chen, Mingli; Lu, Weiguo; Tian, Zhen; Jia, Xun; Li, Yongbao; Zhou, Linghong; Jiang, Steve B; Gu, Xuejun

    2015-11-07

    In intensity modulated radiotherapy (IMRT), the optimal plan for each patient is specific due to unique patient anatomy. To achieve such a plan, patient-specific dosimetric goals reflecting each patient's unique anatomy should be defined and adopted in the treatment planning procedure for plan quality control. This study is to develop such a personalized treatment plan quality control tool by predicting patient-specific dosimetric endpoints (DEs). The incorporation of patient specific DEs is realized by a multi-OAR geometry-dosimetry model, capable of predicting optimal DEs based on the individual patient's geometry. The overall quality of a treatment plan is then judged with a numerical treatment plan quality indicator and characterized as optimal or suboptimal. Taking advantage of clinically available prostate volumetric modulated arc therapy (VMAT) treatment plans, we built and evaluated our proposed plan quality control tool. Using our developed tool, six of twenty evaluated plans were identified as sub-optimal plans. After plan re-optimization, these suboptimal plans achieved better OAR dose sparing without sacrificing the PTV coverage, and the dosimetric endpoints of the re-optimized plans agreed well with the model predicted values, which validate the predictability of the proposed tool. In conclusion, the developed tool is able to accurately predict optimally achievable DEs of multiple OARs, identify suboptimal plans, and guide plan optimization. It is a useful tool for achieving patient-specific treatment plan quality control.

  7. A cross-cultural study on perceived health-related quality of life in children and adolescents with type 1 diabetes mellitus.

    PubMed

    Kalyva, Efrosini; Abdul-Rasoul, Majedah; Kehl, Dániel; Barkai, László; Lukács, Andrea

    2016-04-01

    This study investigated whether culture can affect self- and proxy-reports of perceived diabetes-specific health-related quality of life of children and adolescents with type 1 diabetes when taking into account glycemic control, gender and age. A total of 416 patients aged between 8 and 18 years--84 (Greece), 135 (Hungary) and 197 (Kuwait)--and their parents completed the Pediatric Quality of Life Inventory 3.0. Diabetes Module. Gender and age did not have any effect on perceived diabetes-specific health-related quality of life. Significant differences were detected among countries in self- and proxy-reports of diabetes-specific health-related quality of life when controlling for glycemic control. More specifically, Greek patients with type 1 diabetes and their parents reported significantly worse disease-specific health-related quality of life than their peers from Kuwait and Hungary. Moreover, culture affected the level of agreement between self- and proxy-reports with parents from Kuwait underestimating their children's diabetes-specific health-related quality of life. The impact of culture on self- and proxy-reports of diabetes-specific health-related quality of life warrants further investigation, since it might suggest the need for differential psychosocial treatment. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. The comparison of perceived health-related quality of life between Australian children with severe specific language impairment to age and gender-matched peers.

    PubMed

    Nicola, Kristy; Watter, Pauline

    2018-02-14

    Children with specific language impairment often present with multiple comorbidities, which may adversely affect both participation in play and academic performance, potentially impacting a child's health-related quality of life. This study 1) explored the suitability of the Pediatric Quality of Life Inventory™ Version 4.0 Generic Core Scales (PedsQL™) for use with a typically developing Australian control group, and 2) compared the health-related quality of life between a control group and Australian children with severe specific language impairment. Health-related quality of life data collected as part of a broader study of 43 children with severe specific language impairment (males = 35, age range 5-16, mean age = 8.79+/- 2.92) enrolled at a special school were used to explore previously unreported findings. Typically developing gender and age matched (+/- 3 months) peers were recruited from local schools. The PedsQL™ child self-report and proxy-report were individually or interviewer-administered to the control group as required, and then compared to the group with specific language impairment. The PedsQL™ was reliable and feasible for use with the control group (N = 43, males = 35, age range = 5-16 years, mean age = 8.74+/- 2.94 years). Control group performance was as expected as per the manual. Parents of the control group scored their children significantly higher than did the children themselves on all scales except the emotional functioning scale. Both the control group children and their parents scored themselves significantly higher on all scales, compared to children with severe specific language impairment and their parents. The PedsQL™ was suitable for use with the control group. Further, the recruitment of a control group provided additional clarity on the extent a severe specific language impairment impacts on an Australian child's perceived health-related quality of life, compared to the manual cut-off scores. Severe specific language impairment significantly impacts negatively on the health-related quality of life of Australian children across all domains, particularly when compared to an age and gender-matched group of peers. These results warrant the inclusion of health-related quality of life evaluations in the assessment of these children along with a multidisciplinary approach.

  9. Importance of implementing an analytical quality control system in a core laboratory.

    PubMed

    Marques-Garcia, F; Garcia-Codesal, M F; Caro-Narros, M R; Contreras-SanFeliciano, T

    2015-01-01

    The aim of the clinical laboratory is to provide useful information for screening, diagnosis and monitoring of disease. The laboratory should ensure the quality of extra-analytical and analytical process, based on set criteria. To do this, it develops and implements a system of internal quality control, designed to detect errors, and compare its data with other laboratories, through external quality control. In this way it has a tool to detect the fulfillment of the objectives set, and in case of errors, allowing corrective actions to be made, and ensure the reliability of the results. This article sets out to describe the design and implementation of an internal quality control protocol, as well as its periodical assessment intervals (6 months) to determine compliance with pre-determined specifications (Stockholm Consensus(1)). A total of 40 biochemical and 15 immunochemical methods were evaluated using three different control materials. Next, a standard operation procedure was planned to develop a system of internal quality control that included calculating the error of the analytical process, setting quality specifications, and verifying compliance. The quality control data were then statistically depicted as means, standard deviations, and coefficients of variation, as well as systematic, random, and total errors. The quality specifications were then fixed and the operational rules to apply in the analytical process were calculated. Finally, our data were compared with those of other laboratories through an external quality assurance program. The development of an analytical quality control system is a highly structured process. This should be designed to detect errors that compromise the stability of the analytical process. The laboratory should review its quality indicators, systematic, random and total error at regular intervals, in order to ensure that they are meeting pre-determined specifications, and if not, apply the appropriate corrective actions. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

  10. 7 CFR 58.141 - Alternate quality control program.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Alternate quality control program. 58.141 Section 58... Service 1 Quality Specifications for Raw Milk § 58.141 Alternate quality control program. When a plant has in operation an acceptable quality program, at the producer level, which is approved by the...

  11. Headache-specific locus of control and migraine-related quality of life: understanding the role of anxiety

    PubMed Central

    Grinberg, Amy S.; Seng, Elizabeth K.

    2017-01-01

    Purpose This study examined the relationship between headache-specific locus of control (HSLC) and migraine-related quality of life, and anxiety as a mediator of this relationship. Methods Two hundred and thirty-two people with severe migraine participated in the Treatment of Severe Migraine trial. At baseline, participants completed self-report questionnaires of headache-specific locus of control (HSLC; subscales = Internal, Chance, and Medical Professionals), anxiety, and migraine-related quality of life. Correlations examined relationships between HSLC, anxiety, and migraine-related quality of life; ordinary least squares regression evaluated anxiety as a mediator of the relationship between HSLC and migraine-related quality of life. Results Higher internal HSLC was related to higher overall migraine-related quality of life (ps < .05) and emotion function impairments (p = .012). Anxiety mediated the relationship between internal HSLC and all measures of migraine-specific quality of life (ps < .05). Higher external (medical professionals and chance) HSLC was related to higher migraine-related quality of life impairments (all ps < .001). Conclusions All HSLC beliefs are associated with higher migraine-related quality of life impairments. Anxiety mediates the relationship between internal HSLC and migraine-related quality of life. PMID:27488417

  12. Embankment quality and assessment of moisture control implementation.

    DOT National Transportation Integrated Search

    2016-02-01

    A specification for contractor moisture quality control (QC) in roadway embankment construction has been in use for approximately 10 : years in Iowa on about 190 projects. The use of this QC specification and the development of the soils certificatio...

  13. Development of concrete QC/QA specifications for highway construction in Kentucky.

    DOT National Transportation Integrated Search

    2001-08-01

    There is a growing trend toward quality-based specifications in highway construction. A large number of quality control/quality assurance (QC/QA) specifications shift the responsibility of day-to-day testing from the state DOH to the contractor. This...

  14. 21 CFR 211.165 - Testing and release for distribution.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... products meet each appropriate specification and appropriate statistical quality control criteria as a condition for their approval and release. The statistical quality control criteria shall include appropriate acceptance levels and/or appropriate rejection levels. (e) The accuracy, sensitivity, specificity, and...

  15. Challenges in Routine Implementation and Quality Control of Rapid Diagnostic Tests for Malaria–Rufiji District, Tanzania

    PubMed Central

    McMorrow, Meredith L.; Masanja, M. Irene; Abdulla, Salim M. K.; Kahigwa, Elizeus; Kachur, S. Patrick

    2018-01-01

    Rapid diagnostic tests (RDTs) represent an alternative to microscopy for malaria diagnosis and have shown high sensitivity and specificity in a variety of study settings. Current World Health Organization (WHO) guidelines for quality control of RDTs provide detailed instructions on pre-field testing, but offer little guidance for quality assurance once RDTs are deployed in health facilities. From September 2006 to April 2007, we introduced a histidine-rich protein II (HRP2)-based RDT (Paracheck) for suspected malaria cases five years of age and older in nine health facilities in Rufiji District, Tanzania, to assess sensitivity and specificity of RDTs in routine use at rural health facilities. Thick blood smears were collected for all patients tested with RDTs and stained and read by laboratory personnel in each facility. Thick smears were subsequently reviewed by a reference microscopist to determine RDT sensitivity and specificity. In all nine health facilities, there were significant problems with the quality of staining and microscopy. Sensitivity and specificity of RDTs were difficult to assess given the poor quality of routine blood smear staining. Mean operational sensitivity of RDTs based on reference microscopy was 64.8%, but varied greatly by health facility, range 18.8–85.9%. Sensitivity of RDTs increased with increasing parasite density. Specificity remained high at 87.8% despite relatively poor slide quality. Institution of quality control of RDTs based on poor quality blood smear staining may impede reliable measurement of sensitivity and specificity and undermine confidence in the new diagnostic. There is an urgent need for the development of alternative quality control procedures for rapid diagnostic tests that can be performed at the facility level. PMID:18784230

  16. A method for evaluating treatment quality using in vivo EPID dosimetry and statistical process control in radiation therapy.

    PubMed

    Fuangrod, Todsaporn; Greer, Peter B; Simpson, John; Zwan, Benjamin J; Middleton, Richard H

    2017-03-13

    Purpose Due to increasing complexity, modern radiotherapy techniques require comprehensive quality assurance (QA) programmes, that to date generally focus on the pre-treatment stage. The purpose of this paper is to provide a method for an individual patient treatment QA evaluation and identification of a "quality gap" for continuous quality improvement. Design/methodology/approach A statistical process control (SPC) was applied to evaluate treatment delivery using in vivo electronic portal imaging device (EPID) dosimetry. A moving range control chart was constructed to monitor the individual patient treatment performance based on a control limit generated from initial data of 90 intensity-modulated radiotherapy (IMRT) and ten volumetric-modulated arc therapy (VMAT) patient deliveries. A process capability index was used to evaluate the continuing treatment quality based on three quality classes: treatment type-specific, treatment linac-specific, and body site-specific. Findings The determined control limits were 62.5 and 70.0 per cent of the χ pass-rate for IMRT and VMAT deliveries, respectively. In total, 14 patients were selected for a pilot study the results of which showed that about 1 per cent of all treatments contained errors relating to unexpected anatomical changes between treatment fractions. Both rectum and pelvis cancer treatments demonstrated process capability indices were less than 1, indicating the potential for quality improvement and hence may benefit from further assessment. Research limitations/implications The study relied on the application of in vivo EPID dosimetry for patients treated at the specific centre. Sampling patients for generating the control limits were limited to 100 patients. Whilst the quantitative results are specific to the clinical techniques and equipment used, the described method is generally applicable to IMRT and VMAT treatment QA. Whilst more work is required to determine the level of clinical significance, the authors have demonstrated the capability of the method for both treatment specific QA and continuing quality improvement. Practical implications The proposed method is a valuable tool for assessing the accuracy of treatment delivery whilst also improving treatment quality and patient safety. Originality/value Assessing in vivo EPID dosimetry with SPC can be used to improve the quality of radiation treatment for cancer patients.

  17. Quality control and quality assurance of hot mix asphalt construction in Delaware.

    DOT National Transportation Integrated Search

    2006-07-01

    Since the mid 60s the Federal Highway Administration began to encourage : Departments of Transportation and Contractors toward the use of quality control and : quality assurance (QA/QC) specifications, which are statistically based. : For example,...

  18. 40 CFR 63.10020 - How do I monitor and collect data to demonstrate continuous compliance?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-of-control periods, or required monitoring system quality assurance or control activities in... monitoring system quality assurance or quality control activities including, as applicable, calibration... collect data according to this section and the site-specific monitoring plan required by § 63.10000(d). (b...

  19. 40 CFR 63.10020 - How do I monitor and collect data to demonstrate continuous compliance?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-of-control periods, or required monitoring system quality assurance or control activities in... monitoring system quality assurance or quality control activities including, as applicable, calibration... collect data according to this section and the site-specific monitoring plan required by § 63.10000(d). (b...

  20. 40 CFR 63.10020 - How do I monitor and collect data to demonstrate continuous compliance?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-of-control periods, or required monitoring system quality assurance or control activities in... monitoring system quality assurance or quality control activities including, as applicable, calibration... collect data according to this section and the site-specific monitoring plan required by § 63.10000(d). (b...

  1. 30 CFR 28.31 - Quality control plans; contents.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 28.31 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.31 Quality control plans; contents. (a... Specification MIL-F-15160D is available for examination at the U.S. Department of Labor, Mine Safety and Health...

  2. 30 CFR 28.31 - Quality control plans; contents.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 28.31 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.31 Quality control plans; contents. (a... Specification MIL-F-15160D is available for examination at the U.S. Department of Labor, Mine Safety and Health...

  3. 30 CFR 28.31 - Quality control plans; contents.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 28.31 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.31 Quality control plans; contents. (a... Specification MIL-F-15160D is available for examination at the U.S. Department of Labor, Mine Safety and Health...

  4. 30 CFR 28.31 - Quality control plans; contents.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 28.31 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.31 Quality control plans; contents. (a... Specification MIL-F-15160D is available for examination at the U.S. Department of Labor, Mine Safety and Health...

  5. General aviation fuel quality control

    NASA Technical Reports Server (NTRS)

    Poitz, H.

    1983-01-01

    Quality control measures for aviation gasoline, and some of the differences between quality control on avgas and mogas are discussed. One thing to keep in mind is that with motor gasoline you can always pull off to the side of the road. It's not so easy to do in an airplane. Consequently, there are reasons for having the tight specifications and the tight quality control measures on avgas as compared to motor gasoline.

  6. Commercial jet fuel quality control

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Strauss, K.H.

    1995-05-01

    The paper discusses the purpose of jet fuel quality control between the refinery and the aircraft. It describes fixed equipment, including various types of filters, and the usefulness and limitations of this equipment. Test equipment is reviewed as are various surveillance procedures. These include the Air Transport Association specification ATA 103, the FAA Advisory Circular 150/5230-4, the International Air Transport Association Guidance Material for Fuel Quality Control and Fuelling Service and the Guidelines for Quality Control at Jointly Operated Fuel Systems. Some past and current quality control problems are briefly mentioned.

  7. Develop a Methodology to Evaluate the Effectiveness of QC/QA Specifications (Phase II)

    DOT National Transportation Integrated Search

    1998-08-01

    The Texas Department of Transportation (TxDOT) has been implementing statistically based quality control/quality assurance (QC/QA) specifications for hot mix asphalt concrete pavements since the early 1990s. These specifications have been continuousl...

  8. Swallowing Quality of Life After Zona Incerta Deep Brain Stimulation.

    PubMed

    Sundstedt, Stina; Nordh, Erik; Linder, Jan; Hedström, Johanna; Finizia, Caterina; Olofsson, Katarina

    2017-02-01

    The management of Parkinson's disease (PD) has been improved, but management of signs like swallowing problems is still challenging. Deep brain stimulation (DBS) alleviates the cardinal motor symptoms and improves quality of life, but its effect on swallowing is not fully explored. The purpose of this study was to examine self-reported swallowing-specific quality of life before and after caudal zona incerta DBS (cZI DBS) in comparison with a control group. Nine PD patients (2 women and 7 men) completed the self-report Swallowing Quality of Life questionnaire (SWAL-QOL) before and 12 months after cZI DBS surgery. The postoperative data were compared to 9 controls. Median ages were 53 years (range, 40-70 years) for patients and 54 years (range, 42-72 years) for controls. No significant differences were found between the pre- or postoperative scores. The SWAL-QOL total scores did not differ significantly between PD patients and controls. The PD patients reported significantly lower scores in the burden subscale and the symptom scale. Patients with PD selected for cZI DBS showed good self-reported swallowing-specific quality of life, in many aspects equal to controls. The cZI DBS did not negatively affect swallowing-specific quality of life in this study.

  9. Measuring management's perspective of data quality in Pakistan's Tuberculosis control programme: a test-based approach to identify data quality dimensions.

    PubMed

    Ali, Syed Mustafa; Anjum, Naveed; Kamel Boulos, Maged N; Ishaq, Muhammad; Aamir, Javariya; Haider, Ghulam Rasool

    2018-01-16

    Data quality is core theme of programme's performance assessment and many organizations do not have any data quality improvement strategy, wherein data quality dimensions and data quality assessment framework are important constituents. As there is limited published research about the data quality specifics that are relevant to the context of Pakistan's Tuberculosis control programme, this study aims at identifying the applicable data quality dimensions by using the 'fitness-for-purpose' perspective. Forty-two respondents pooled a total of 473 years of professional experience, out of which 223 years (47%) were in TB control related programmes. Based on the responses against 11 practical cases, adopted from the routine recording and reporting system of Pakistan's TB control programme (real identities of patient were masked), completeness, accuracy, consistency, vagueness, uniqueness and timeliness are the applicable data quality dimensions relevant to the programme's context, i.e. work settings and field of practice. Based on a 'fitness-for-purpose' approach to data quality, this study used a test-based approach to measure management's perspective and identified data quality dimensions pertinent to the programme and country specific requirements. Implementation of a data quality improvement strategy and achieving enhanced data quality would greatly help organizations in promoting data use for informed decision making.

  10. A system framework of inter-enterprise machining quality control based on fractal theory

    NASA Astrophysics Data System (ADS)

    Zhao, Liping; Qin, Yongtao; Yao, Yiyong; Yan, Peng

    2014-03-01

    In order to meet the quality control requirement of dynamic and complicated product machining processes among enterprises, a system framework of inter-enterprise machining quality control based on fractal was proposed. In this system framework, the fractal-specific characteristic of inter-enterprise machining quality control function was analysed, and the model of inter-enterprise machining quality control was constructed by the nature of fractal structures. Furthermore, the goal-driven strategy of inter-enterprise quality control and the dynamic organisation strategy of inter-enterprise quality improvement were constructed by the characteristic analysis on this model. In addition, the architecture of inter-enterprise machining quality control based on fractal was established by means of Web service. Finally, a case study for application was presented. The result showed that the proposed method was available, and could provide guidance for quality control and support for product reliability in inter-enterprise machining processes.

  11. Standard procedures and quality-control practices for the U.S. Geological Survey National Field Quality Assurance Program from 1982 through 1993

    USGS Publications Warehouse

    Stanley, D.L.

    1995-01-01

    The U.S. Geological Survey operates the National Field Quality Assurance Program to provide quality- assurance reference samples to field personnel who make water-quality field measurements. The program monitors the accuracy and precision of pH, specific conductance, and alkalinity field measurements. This report documents the operational procedures and quality-control techniques used in operating the quality-assurance program.

  12. Applications of flight control system methods to an advanced combat rotorcraft

    NASA Technical Reports Server (NTRS)

    Tischler, Mark B.; Fletcher, Jay W.; Morris, Patrick M.; Tucker, George T.

    1989-01-01

    Advanced flight control system design, analysis, and testing methodologies developed at the Ames Research Center are applied in an analytical and flight test evaluation of the Advanced Digital Optical Control System (ADOCS) demonstrator. The primary objectives are to describe the knowledge gained about the implications of digital flight control system design for rotorcraft, and to illustrate the analysis of the resulting handling-qualities in the context of the proposed new handling-qualities specification for rotorcraft. Topics covered in-depth are digital flight control design and analysis methods, flight testing techniques, ADOCS handling-qualities evaluation results, and correlation of flight test results with analytical models and the proposed handling-qualities specification. The evaluation of the ADOCS demonstrator indicates desirable response characteristics based on equivalent damping and frequency, but undersirably large effective time-delays (exceeding 240 m sec in all axes). Piloted handling-qualities are found to be desirable or adequate for all low, medium, and high pilot gain tasks; but handling-qualities are inadequate for ultra-high gain tasks such as slope and running landings.

  13. Quality specification and status of internal quality control of cardiac biomarkers in China from 2011 to 2016.

    PubMed

    Li, Tingting; Wang, Wei; Zhao, Haijian; He, Falin; Zhong, Kun; Yuan, Shuai; Wang, Zhiguo

    2017-09-07

    This study aimed to investigate the status of internal quality control (IQC) for cardiac biomarkers from 2011 to 2016 so that we can have overall knowledge of the precision level of measurements in China and set appropriate precision specifications. Internal quality control data of cardiac biomarkers, including creatinine kinase MB (CK-MB) (μg/L), CK-MB(U/L), myoglobin (Mb), cardiac troponin I (cTnI), cardiac troponin T (cTnT), and homocysteines (HCY), were collected by a web-based external quality assessment (EQA) system. Percentages of laboratories meeting five precision quality specifications for current coefficient of variations (CVs) were calculated. Then, appropriate precision specifications were chosen for these six analytes. Finally, the CVs and IQC practice were further analyzed with different grouping methods. The current CVs remained nearly constant for 6 years. cTnT had the highest pass rates every year against five specifications, whereas HCY had the lowest pass rates. Overall, most analytes had a satisfactory performance (pass rates >80%), except for HCY, if one-third TEa or the minimum specification were employed. When the optimal specification was applied, the performance of most analytes was frustrating (pass rates < 60%) except for cTnT. The appropriate precision specifications of Mb, cTnI, cTnT and HCY were set as current CVs less than 9.20%, 9.90%, 7.50%, 10.54%, 7.63%, and 6.67%, respectively. The data of IQC practices indicated wide variation and substantial progress. The precision performance of cTnT was already satisfying, while the other five analytes, especially HCY, were still frustrating; thus, ongoing investigation and continuous improvement for IQC are still needed. © 2017 Wiley Periodicals, Inc.

  14. Identification of milling and baking quality QTL in multiple soft wheat mapping populations

    USDA-ARS?s Scientific Manuscript database

    Wheat derived food products require a range of characteristics. Identification and understanding of the genetic components controlling end-use quality of wheat is important for crop improvement. We assessed the underlying genetics controlling specific milling and baking quality parameters of soft wh...

  15. National Survey on Internal Quality Control for HbA(1c) Analytical Instruments in 331 Hospital Laboratories of China.

    PubMed

    Zeng, Rong; Wang, Wei; Zhao, Haijian; Fei, Yang; Wang, Zhiguo

    2015-01-01

    The narrow gap of HbA1 value of mass fraction between "normal" (< 6.0%) and "diabetes" (≥ 6.5%) necessitates tight control of inter-assay standardization, assay precision, and trueness. This survey was initiated to obtain knowledge of the current situation of internal quality control (IQC) practice for HbA(1c) in China and find out the most appropriate quality specifications. Data of IQC for HbA(1c) in 331 institutions participating in the national proficiency testing (PT) programs in China were evaluated using four levels of quality specifications, and the percentages of laboratories meeting the quality requirement were calculated to find out the most appropriate quality specifications for control materials of HbA(1c) in China. The IQC data varied vastly among 331 clinical laboratories in China. The measurement of control materials covered a wide range from 4.52% to 12.24% (inter-quartile range) and there were significant differences among the CVs of different methods, including LPLC, CE-HPLC, AC-HPLC, immunoturbidimetry, and others. Among the four main methods, CE-HPLC and AC-HPLC achieved a better precision. As we can see, the performance of laboratories for HbA(1c) has yet to be improved. Clinical laboratories in China should improve their performance with a stricter imprecision criteria.

  16. Handling Qualities Specifications for U.S. Military Helicopters

    NASA Technical Reports Server (NTRS)

    Key, David L.

    1982-01-01

    Inadequacies in the military specification for helicopter handling qualities, MIL-H-8501A, have long been recognized, and the latest procurements by the U.S. Army used special Prime Item Development Specifications (PIDS). This paper assesses the efficacy of these PIDS and suggests that changes should be made. In particular, the structure developed in MIL-F-8785B (ASG) (the specification for flying qualities of piloted airplanes) should be incorporated. Improved requirements must be based on a systematic data base and concentrated on topics most important in preliminary design: static and dynamic stability, control power and sensitivity, and interaction with controllers and displays. Emphasis should be on current military helicopter missions and helicopter idiosyncrasies such as cross-coupling, nonlinearities, and higher-order dynamics.

  17. Guidelines for the detection of Trichinella larvae at the slaughterhouse in a quality assurance system.

    PubMed

    Rossi, Patrizia; Pozio, Edoardo

    2008-01-01

    The European Community Regulation (EC) No. 2075/2005 lays down specific rules on official controls for the detection of Trichinella in fresh meat for human consumption, recommending the pooled-sample digestion method as the reference method. The aim of this document is to provide specific guidance to implement an appropriate Trichinella digestion method by a laboratory accredited according to the ISO/IEC 17025:2005 international standard, and performing microbiological testing following the EA-04/10:2002 international guideline. Technical requirements for the correct implementation of the method, such as the personnel competence, specific equipments and reagents, validation of the method, reference materials, sampling, quality assurance of results and quality control of performance are provided, pointing out the critical control points for the correct implementation of the digestion method.

  18. SB certification for mixture-based specification for flexible base.

    DOT National Transportation Integrated Search

    2012-10-01

    Presentation topics: : Establish List of Qualified Producers; : Producers Responsible for Process Control/Quality Control; : Reduce TxDOT Sampling and Testing; : Expedite Aggregate Base Acceptance; : Share Responsibility (Producer/TxDOT) for Quality ...

  19. On the design of decoupling controllers for advanced rotorcraft in the hover case

    NASA Technical Reports Server (NTRS)

    Fan, M. K. H.; Tits, A.; Barlow, J.; Tsing, N. K.; Tischler, M.; Takahashi, M.

    1991-01-01

    A methodology for design of helicopter control systems is proposed that can account for various types of concurrent specifications: stability, decoupling between longitudinal and lateral motions, handling qualities, and physical limitations of the swashplate motions. This is achieved by synergistic use of analytical techniques (Q-parameterization of all stabilizing controllers, transfer function interpolation) and advanced numerical optimization techniques. The methodology is used to design a controller for the UH-60 helicopter in hover. Good results are achieved for decoupling and handling quality specifications.

  20. 23 CFR 637.207 - Quality assurance program.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... independent assurance (IA) program consisting of the following: (1) Acceptance program. (i) Each STD's... quality control samples. (C) The quality control sampling and testing is evaluated by an IA program. (iii... appropriate. See 23 CFR 635.413(e) for specific requirements. (2) The IA program shall evaluate the qualified...

  1. [Pharmaceutical product quality control and good manufacturing practices].

    PubMed

    Hiyama, Yukio

    2010-01-01

    This report describes the roles of Good Manufacturing Practices (GMP) in pharmaceutical product quality control. There are three keys to pharmaceutical product quality control. They are specifications, thorough product characterization during development, and adherence to GMP as the ICH Q6A guideline on specifications provides the most important principles in its background section. Impacts of the revised Pharmaceutical Affairs Law (rPAL) which became effective in 2005 on product quality control are discussed. Progress of ICH discussion for Pharmaceutical Development (Q8), Quality Risk Management (Q9) and Pharmaceutical Quality System (Q10) are reviewed. In order to reconstruct GMP guidelines and GMP inspection system in the regulatory agencies under the new paradigm by rPAL and the ICH, a series of Health Science studies were conducted. For GMP guidelines, product GMP guideline, technology transfer guideline, laboratory control guideline and change control system guideline were written. For the GMP inspection system, inspection check list, inspection memo and inspection scenario were proposed also by the Health Science study groups. Because pharmaceutical products and their raw materials are manufactured and distributed internationally, collaborations with other national authorities are highly desired. In order to enhance the international collaborations, consistent establishment of GMP inspection quality system throughout Japan will be essential.

  2. Revision 2 of the Enbridge Quality Assurance Project Plan

    EPA Pesticide Factsheets

    This Quality Assurance Project Plan (QAPP) presents Revision 2 of the organization, objectives, planned activities, and specific quality assurance/quality control (QA/QC) procedures associated with the Enbridge Marshall Pipeline Release Project.

  3. Can current analytical quality performance of UK clinical laboratories support evidence-based guidelines for diabetes and ischaemic heart disease?--A pilot study and a proposal.

    PubMed

    Jassam, Nuthar; Yundt-Pacheco, John; Jansen, Rob; Thomas, Annette; Barth, Julian H

    2013-08-01

    The implementation of national and international guidelines is beginning to standardise clinical practice. However, since many guidelines have decision limits based on laboratory tests, there is an urgent need to ensure that different laboratories obtain the same analytical result on any sample. A scientifically-based quality control process will be a pre-requisite to provide this level of analytical performance which will support evidence-based guidelines and movement of patients across boundaries while maintaining standardised outcomes. We discuss the finding of a pilot study performed to assess UK clinical laboratories readiness to work to a higher grade quality specifications such as biological variation-based quality specifications. Internal quality control (IQC) data for HbA1c, glucose, creatinine, cholesterol and high density lipoprotein (HDL)-cholesterol were collected from UK laboratories participating in the Bio-Rad Unity QC programme. The median of the coefficient of variation (CV%) of the participating laboratories was evaluated against the CV% based on biological variation. Except creatinine, the other four analytes had a variable degree of compliance with the biological variation-based quality specifications. More than 75% of the laboratories met the biological variation-based quality specifications for glucose, cholesterol and HDL-cholesterol. Slightly over 50% of the laboratories met the analytical goal for HBA1c. Only one analyte (cholesterol) had a performance achieving the higher quality specifications consistent with 5σ. Our data from IQC do not consistently demonstrate that the results from clinical laboratories meet evidence-based quality specifications. Therefore, we propose that a graded scale of quality specifications may be needed at this stage.

  4. 75 FR 60013 - Approval and Promulgation of Air Quality Implementation Plans; Maryland; Control of Volatile...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-29

    ... Promulgation of Air Quality Implementation Plans; Maryland; Control of Volatile Organic Compounds Emissions... Maryland's Volatile Organic Compounds from Specific Processes Regulation. Maryland has adopted standards... (RACT) requirements for sources of volatile organic compounds (VOCs) covered by control techniques...

  5. Compromised quality of life in patients with both Type 1 diabetes mellitus and coeliac disease.

    PubMed

    Bakker, S F; Pouwer, F; Tushuizen, M E; Hoogma, R P; Mulder, C J; Simsek, S

    2013-07-01

    Type 1 diabetes mellitus and coeliac disease are two chronic illnesses associated with each other. Both diseases and their treatments can seriously impair quality of life. The objective of the present study was to investigate health-related quality of life in adult patients diagnosed with both Type 1 diabetes and coeliac disease and compare this with healthy control subjects and control subjects who have Type 1 diabetes only. A generic measure of health-related quality of life (RAND-36) and a measure of diabetes-specific quality of life (DQOL) questionnaires were sent to patients diagnosed with both Type 1 diabetes and coeliac disease. The control group consisted of patients with Type 1 diabetes without coeliac disease matched for age, gender and socio-economic status. Generic quality of life scores were compared with data from healthy Dutch control subjects. Fifty-seven patients with Type 1 diabetes and coeliac disease were included and no associations between clinical characteristics and quality of life were observed. Women reported a lower quality of life in social functioning, vitality and mental health than men (all P < 0.05). A lower diabetes-specific quality of life was observed regarding diabetes-related worries and social worries in patients with Type 1 diabetes and coeliac disease compared with patients with Type 1 diabetes. Compared with healthy control subjects, quality of life in patients with Type 1 diabetes and coeliac disease was significantly lower, particularly social functioning (Cohen's d = 0.76) and general health perception (Cohen's d = 0.86). The additional diagnosis of coeliac disease and treatment by gluten-free diet in adult patients with Type 1 diabetes has a considerable, negative impact on quality of life and diabetes-specific quality of life. Women are particularly affected and social functioning and general health perception is compromised. © 2013 The Authors. Diabetic Medicine © 2013 Diabetes UK.

  6. Quality assurance procedures for environmental control and monitoring in plant growth facilities. Report of the North Central Regional 101 Committee on Growth Chamber Use

    NASA Technical Reports Server (NTRS)

    Tibbitts, T. W. (Principal Investigator)

    1986-01-01

    This report includes procedures for ensuring the quality of the environment provided for plant growth in controlled environment facilities. Biologists and engineers may use these procedures for ensuring quality control during experiments or for ensuring quality control in the design of plant growth facilities. Environmental monitoring prior to and during experiments is included in these procedures. Specific recommendations cover control, acquisition, and calibration for sensor types for the separate parameters of radiation (light), temperature, humidity, carbon dioxide, and air movement.

  7. Modeling Canadian Quality Control Test Program for Steroid Hormone Receptors in Breast Cancer: Diagnostic Accuracy Study.

    PubMed

    Pérez, Teresa; Makrestsov, Nikita; Garatt, John; Torlakovic, Emina; Gilks, C Blake; Mallett, Susan

    The Canadian Immunohistochemistry Quality Control program monitors clinical laboratory performance for estrogen receptor and progesterone receptor tests used in breast cancer treatment management in Canada. Current methods assess sensitivity and specificity at each time point, compared with a reference standard. We investigate alternative performance analysis methods to enhance the quality assessment. We used 3 methods of analysis: meta-analysis of sensitivity and specificity of each laboratory across all time points; sensitivity and specificity at each time point for each laboratory; and fitting models for repeated measurements to examine differences between laboratories adjusted by test and time point. Results show 88 laboratories participated in quality control at up to 13 time points using typically 37 to 54 histology samples. In meta-analysis across all time points no laboratories have sensitivity or specificity below 80%. Current methods, presenting sensitivity and specificity separately for each run, result in wide 95% confidence intervals, typically spanning 15% to 30%. Models of a single diagnostic outcome demonstrated that 82% to 100% of laboratories had no difference to reference standard for estrogen receptor and 75% to 100% for progesterone receptor, with the exception of 1 progesterone receptor run. Laboratories with significant differences to reference standard identified with Generalized Estimating Equation modeling also have reduced performance by meta-analysis across all time points. The Canadian Immunohistochemistry Quality Control program has a good design, and with this modeling approach has sufficient precision to measure performance at each time point and allow laboratories with a significantly lower performance to be targeted for advice.

  8. 75 FR 59084 - Approval and Promulgation of Air Quality Implementation Plans; Maryland; Control Technique...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-27

    ... Promulgation of Air Quality Implementation Plans; Maryland; Control Technique Guidelines for Paper, Film, and... from paper, film, and foil coatings. Specifically, Maryland is amending its regulations by adopting the requirements of EPA's Control Technique Guidelines (CTG) for Paper, Film, and Foil Coatings. These amendments...

  9. Statistical Process Control: Going to the Limit for Quality.

    ERIC Educational Resources Information Center

    Training, 1987

    1987-01-01

    Defines the concept of statistical process control, a quality control method used especially in manufacturing. Generally, concept users set specific standard levels that must be met. Makes the point that although employees work directly with the method, management is responsible for its success within the plant. (CH)

  10. Effects of side-stick controllers on rotorcraft handling qualities for terrain flight

    NASA Technical Reports Server (NTRS)

    Aiken, E. W.

    1985-01-01

    Pertinent fixed and rotary-wing feasibility studies and handling-qualities research programs are reviewed and the effects of certain controller characteristics on handling qualities for specific rotorcraft flight tasks are summarized. The effects of the controller force-deflection relationship and the number of controlled axes that are integrated in a single controller are examined. Simulation studies were conducted which provide a significant part of the available handling qualities data. The studies demonstrate the feasibility of using a single, properly designed, limited-displacement, multiaxis controller for certain relatively routine flight tasks in a two-crew rotorcraft with nominal levels of stability and control augmentation with a high degree of reliability are incorporated, separated three or two-axis controller configurations are required for acceptable handling qualities.

  11. Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York-July 1997 through June 1999

    USGS Publications Warehouse

    Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

    2006-01-01

    The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance/quality-control data for the time period addressed in this report were stored in the laboratory's SAS data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality- control samples analyzed from July 1997 through June 1999. Results for the quality-control samples for 18 analytical procedures were evaluated for bias and precision. Control charts indicate that data for eight of the analytical procedures were occasionally biased for either high-concentration and (or) low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, total monomeric aluminum, total aluminum, ammonium, calcium, chloride, specific conductance, and sulfate. The data from the potassium and sodium analytical procedures are insufficient for evaluation. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 11 of 13 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. Blank analysis results for chloride showed that 22 percent of blanks did not meet data-quality objectives and results for dissolved organic carbon showed that 31 percent of the blanks did not meet data-quality objectives. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 14 of the 18 analytes. At least 90 percent of the samples met data-quality objectives for all analytes except total aluminum (70 percent of samples met objectives) and potassium (83 percent of samples met objectives). Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated good data quality for most constituents over the time period. The P-sample (low-ionic-strength constituents) analysis had good ratings in two of these studies and a satisfactory rating in the third. The results of the T-sample (trace constituents) analysis indicated high data quality with good ratings in all three studies. The N-sample (nutrient constituents) studies had one each of excellent, good, and satisfactory ratings. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 80 percent of the samples met data-quality objectives for 9 of the 13 analytes; the exceptions were dissolved organic carbon, ammonium, chloride, and specific conductance. Data-quality objectives were not met for dissolved organic carbon in two NWRI studies, but all of the samples were within control limits for the last study. Data-quality objectives were not met in 41 percent of samples analyzed for ammonium, 25 percent of samples analyzed for chloride, and 30 percent of samples analyzed for specific conductance. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 84 percent of the samples analyzed for calcium, chloride, magnesium, pH, and potassium. Data-quality objectives were met by 73 percent of those analyzed for sulfate. The data-quality objective was not met for sodium. The data are insufficient for evaluation of the specific conductance results.

  12. Qualifying Items of Work for End-Result Specifications: Phases I and II

    DOT National Transportation Integrated Search

    1998-12-01

    The Texas Department of Transportation (TxDOT) is presently using a quality control/quality assurance specification for hot-mix asphalt concrete pavement. There is a strong interest in determining if other construction items can be converted to this ...

  13. Research note : field control of asphalt concrete paving mixtures.

    DOT National Transportation Integrated Search

    1995-01-01

    The goal of this study was to develop information and evaluate new methods for controlling quality of the AC mixture in the mat. Specifically, this research project evaluated a gyratory compactor in the field laboratory to determine mix quality. Spec...

  14. KPMG Peat Marwick LLP Corporation of Mercer University Fiscal Year Ended June 30, 1995

    DTIC Science & Technology

    1997-06-11

    The objective of a quality control review is to ensure that the audit was conducted in accordance with applicable standards and meets the auditing...requirements of the OMB Circular A-133. We conducted a quality control review of the audit working papers. We focused our review on the following...qualitative aspects of the audit : due professional care, planning, supervision, independence, quality control, internal controls, substantive testing, general and specific compliance testing, and the Schedule of Federal Awards.

  15. Looking beyond patients: Can parents' quality of life predict asthma control in children?

    PubMed

    Cano-Garcinuño, Alfredo; Mora-Gandarillas, Isabel; Bercedo-Sanz, Alberto; Callén-Blecua, María Teresa; Castillo-Laita, José Antonio; Casares-Alonso, Irene; Forns-Serrallonga, Dolors; Tauler-Toro, Eulàlia; Alonso-Bernardo, Luz María; García-Merino, Águeda; Moneo-Hernández, Isabel; Cortés-Rico, Olga; Carvajal-Urueña, Ignacio; Morell-Bernabé, Juan José; Martín-Ibáñez, Itziar; Rodríguez-Fernández-Oliva, Carmen Rosa; Asensi-Monzó, María Teresa; Fernández-Carazo, Carmen; Murcia-García, José; Durán-Iglesias, Catalina; Montón-Álvarez, José Luis; Domínguez-Aurrecoechea, Begoña; Praena-Crespo, Manuel

    2016-07-01

    Social and family factors may influence the probability of achieving asthma control in children. Parents' quality of life has been insufficiently explored as a predictive factor linked to the probability of achieving disease control in asthmatic children. Determine whether the parents' quality of life predicts medium-term asthma control in children. Longitudinal study of children between 4 and 14 years of age, with active asthma. The parents' quality of life was evaluated using the specific IFABI-R instrument, in which scores were higher for poorer quality of life. Its association with asthma control measures in the child 16 weeks later was analyzed using multivariate methods, adjusting the effect for disease, child and family factors. The data from 452 children were analyzed (median age 9.6 years, 63.3% males). The parents' quality of life was predictive for asthma control; each point increase on the initial IFABI-R score was associated with an adjusted odds ratio (95% confidence interval) of 0.56 (0.37-0.86) for good control of asthma on the second visit, 2.58 (1.62-4.12) for asthma exacerbation, 2.12 (1.33-3.38) for an unscheduled visit to the doctor, and 2.46 (1.18-5.13) for going to the emergency room. The highest quartile for the IFABI-R score had a sensitivity of 34.5% and a specificity of 82.2% to predict poorly controlled asthma. Parents' poorer quality of life is related to poor, medium-term asthma control in children. Assessing the parents' quality of life could aid disease management decisions. Pediatr Pulmonol. 2016;51:670-677. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

  16. 46 CFR 160.050-5 - Sampling, tests, and inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... satisfied that the ring life buoys meet this subpart. Each lot must demonstrate— (1) First quality... MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoy, Life Ring, Unicellular... necessary to maintain quality control and to monitor compliance with the requirements of this subchapter. (b...

  17. 46 CFR 160.050-5 - Sampling, tests, and inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... satisfied that the ring life buoys meet this subpart. Each lot must demonstrate— (1) First quality... MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoy, Life Ring, Unicellular... necessary to maintain quality control and to monitor compliance with the requirements of this subchapter. (b...

  18. 46 CFR 160.050-5 - Sampling, tests, and inspection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... satisfied that the ring life buoys meet this subpart. Each lot must demonstrate— (1) First quality... MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoy, Life Ring, Unicellular... necessary to maintain quality control and to monitor compliance with the requirements of this subchapter. (b...

  19. 46 CFR 160.050-5 - Sampling, tests, and inspection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... satisfied that the ring life buoys meet this subpart. Each lot must demonstrate— (1) First quality... MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoy, Life Ring, Unicellular... necessary to maintain quality control and to monitor compliance with the requirements of this subchapter. (b...

  20. 46 CFR 160.050-5 - Sampling, tests, and inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... satisfied that the ring life buoys meet this subpart. Each lot must demonstrate— (1) First quality... MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoy, Life Ring, Unicellular... necessary to maintain quality control and to monitor compliance with the requirements of this subchapter. (b...

  1. Improved GMP-compliant multi-dose production and quality control of 6-[18F]fluoro-L-DOPA.

    PubMed

    Luurtsema, G; Boersma, H H; Schepers, M; de Vries, A M T; Maas, B; Zijlma, R; de Vries, E F J; Elsinga, P H

    2017-01-01

    6-[ 18 F]Fluoro-L-3,4-dihydroxyphenylalanine (FDOPA) is a frequently used radiopharmaceutical for detecting neuroendocrine and brain tumors and for the differential diagnosis of Parkinson's disease. To meet the demand for FDOPA, a high-yield GMP-compliant production method is required. Therefore, this study aimed to improve the FDOPA production and quality control procedures to enable distribution of the radiopharmaceutical over distances.FDOPA was prepared by electrophilic fluorination of the trimethylstannyl precursor with [ 18 F]F 2 , produced from [ 18 O] 2 via the double-shoot approach, leading to FDOPA with higher specific activity as compared to FDOPA which was synthesized, using [ 18 F]F 2 produced from 20 Ne, leading to FDOPA with a lower specific activity. The quality control of the product was performed using a validated UPLC system and compared with quality control with a conventional HPLC system. Impurities were identified using UPLC-MS. The [ 18 O] 2 double-shoot radionuclide production method yielded significantly more [ 18 F]F 2 with less carrier F 2 than the conventional method starting from 20 Ne. After adjustment of radiolabeling parameters substantially higher amounts of FDOPA with higher specific activity could be obtained. Quality control by UPLC was much faster and detected more side-products than HPLC. UPLC-MS showed that the most important side-product was FDOPA-quinone, rather than 6-hydroxydopa as suggested by the European Pharmacopoeia. The production and quality control of FDOPA were significantly improved by introducing the [ 18 O] 2 double-shoot radionuclide production method, and product analysis by UPLC, respectively. As a result, FDOPA is now routinely available for clinical practice and for distribution over distances.

  2. Quality control in gastrointestinal surgery.

    PubMed

    Ramírez-Barba, Ector Jaime; Arenas-Moya, Diego; Vázquez-Guerrero, Arturo

    2011-01-01

    We analyzed the Mexican legal framework, identifying the vectors that characterize quality and control in gastrointestinal surgery. Quality is contemplated in the health protection rights determined according to the Mexican Constitution, established in the general health law and included as a specific goal in the actual National Development Plan and Health Sector Plan. Quality control implies planning, verification and application of corrective measures. Mexico has implemented several quality strategies such as certification of hospitals and regulatory agreements by the General Salubrity Council, creation of the National Health Quality Committee, generation of Clinical Practice Guidelines and the Certification of Medical Specialties, among others. Quality control in gastrointestinal surgery must begin at the time of medical education and continue during professional activities of surgeons, encouraging multidisciplinary teamwork, knowledge, abilities, attitudes, values and skills that promote homogeneous, safe and quality health services for the Mexican population.

  3. F-8C digital CCV flight control laws

    NASA Technical Reports Server (NTRS)

    Hartmann, G. L.; Hauge, J. A.; Hendrick, R. C.

    1976-01-01

    A set of digital flight control laws were designed for the NASA F-8C digital fly-by-wire aircraft. The control laws emphasize Control Configured Vehicle (CCV) benefits. Specific pitch axis objectives were improved handling qualities, angle-of-attack limiting, gust alleviation, drag reduction in steady and maneuvering flight, and a capability to fly with reduced static stability. The lateral-directional design objectives were improved Dutch roll damping and turn coordination over a wide range in angle-of-attack. An overall program objective was to explore the use of modern control design methodilogy to achieve these specific CCV benefits. Tests for verifying system integrity, an experimental design for handling qualities evaluation, and recommended flight test investigations were specified.

  4. Effects of addition of different fibers on rheological characteristics of cake batter and quality of cakes.

    PubMed

    Aydogdu, Ayca; Sumnu, Gulum; Sahin, Serpil

    2018-02-01

    The aim of this study was to investigate the effects of addition of dietary fibers on rheological properties of batter and cake quality. Wheat flour was replaced by 5 and 10% (wt%) oat, pea, apple and lemon fibers. All cake batters showed shear thinning behavior. Incorporation of fibers increased consistency index (k), storage modulus (G') and loss modulus (G″). As quality parameters, specific volume, hardness, weight loss, color and microstructure of cakes were investigated. Cakes containing oat and pea fibers (5%) had similar specific volume and texture with control cakes which contained no fiber. As fiber concentration increased, specific volume decreased but hardness increased. No significant difference was found between weight loss of control cake and cakes with oat, pea and apple fibers. Lemon fiber enriched cakes had the lowest specific volume, weight loss and color difference. When microstructural images were examined, it was seen that control cake had more porous structure than fiber enriched cakes. In addition, lemon and apple fiber containing cakes had less porous crumb structure as compared to oat and pea containing ones. Oat and pea fiber (5%) enriched cakes had similar physical properties (volume, texture and color) with control cakes.

  5. 46 CFR 160.049-5 - Inspections and tests. 1

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoyant Cushion Plastic Foam § 160.049-5... maintain quality control of the materials used, manufacturing methods and the finished product so as to... samples and components produced to maintain the quality of the finished product. Records of tests...

  6. 46 CFR 160.049-5 - Inspections and tests. 1

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoyant Cushion Plastic Foam § 160.049-5... maintain quality control of the materials used, manufacturing methods and the finished product so as to... samples and components produced to maintain the quality of the finished product. Records of tests...

  7. 46 CFR 160.049-5 - Inspections and tests. 1

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoyant Cushion Plastic Foam § 160.049-5... maintain quality control of the materials used, manufacturing methods and the finished product so as to... samples and components produced to maintain the quality of the finished product. Records of tests...

  8. Calorie Restriction in Overweight SeniorS: Response of Older Adults to a Dieting Study: The CROSSROADS Randomized Controlled Clinical Trial

    PubMed Central

    Haas, Marilyn C.; Bodner, Eric V.; Brown, Cynthia J.; Bryan, David; Buys, David R.; Keita, Akilah Dulin; Flagg, Lee Anne; Goss, Amy; Gower, Barbara; Hovater, Martha; Hunter, Gary; Ritchie, Christine S.; Roth, David L.; Wingo, Brooks C.; Ard, Jamy; Locher, Julie L.

    2014-01-01

    We conducted a study designed to evaluate whether the benefits of intentional weight loss exceed the potential risks in a group of community-dwelling, obese, older adults who were at increased risk for cardiometabolic disease. The CROSSROADS trial used a prospective randomized controlled design to compare the effects of changes in diet composition alone or combined with weight loss with an exercise only control intervention on body composition and adipose tissue deposition (Specific Aim #1: To compare the effects of changes in diet composition alone or combined with weight loss with an exercise only control intervention on body composition, namely visceral adipose tissue (VAT)), cardiometabolic disease risk (Specific Aim #2: To compare the effects of a change in diet composition alone or combined with weight loss with an exercise only control intervention on cardiometabolic disease risk), functional status and quality of life (Specific Aim #3: To compare the effects of a change in diet composition alone or combined with weight loss with an exercise only control intervention on functional status and quality of life). Participants were randomly assigned to one of three groups: Exercise Only (Control) Intervention, Exercise + Diet Quality + Weight Maintenance Intervention, or Exercise + Diet Quality + Weight Loss Intervention. CROSSROADS utilized a lifestyle intervention approach consisting of exercise, dietary, and behavioral components. The development and implementation of the CROSSROADS protocol, including a description of the methodology, detailing specific elements of the lifestyle intervention, assurances of treatment fidelity, and participant retention; outcome measures and adverse event monitoring; as well as unique data management features of the trial results, are presented in this article. PMID:25424512

  9. Calorie restriction in overweight seniors: response of older adults to a dieting study: the CROSSROADS randomized controlled clinical trial.

    PubMed

    Haas, Marilyn C; Bodner, Eric V; Brown, Cynthia J; Bryan, David; Buys, David R; Keita, Akilah Dulin; Flagg, Lee Anne; Goss, Amy; Gower, Barbara; Hovater, Martha; Hunter, Gary; Ritchie, Christine S; Roth, David L; Wingo, Brooks C; Ard, Jamy; Locher, Julie L

    2014-01-01

    We conducted a study designed to evaluate whether the benefits of intentional weight loss exceed the potential risks in a group of community-dwelling obese older adults who were at increased risk for cardiometabolic disease. The CROSSROADS trial used a prospective randomized controlled design to compare the effects of changes in diet composition alone or combined with weight loss with an exercise only control intervention on body composition and adipose tissue deposition (Specific Aim #1: To compare the effects of changes in diet composition alone or combined with weight loss with an exercise only control intervention on body composition, namely visceral adipose tissue), cardiometabolic disease risk (Specific Aim #2: To compare the effects of a change in diet composition alone or combined with weight loss with an exercise only control intervention on cardiometabolic disease risk), and functional status and quality of life (Specific Aim #3: To compare the effects of a change in diet composition alone or combined with weight loss with an exercise only control intervention on functional status and quality of life). Participants were randomly assigned to one of three groups: Exercise Only (Control) Intervention, Exercise + Diet Quality + Weight Maintenance Intervention, or Exercise + Diet Quality + Weight Loss Intervention. CROSSROADS utilized a lifestyle intervention approach consisting of exercise, dietary, and behavioral components. The development and implementation of the CROSSROADS protocol, including a description of the methodology, detailing specific elements of the lifestyle intervention, assurances of treatment fidelity, and participant retention; outcome measures and adverse event monitoring; as well as unique data management features of the trial results, are presented in this article.

  10. Sustainable improvement of animal health care by systematic quality risk management according to the HACCP concept.

    PubMed

    Noordhuizen, J P; Welpelo, H J

    1996-12-01

    This paper addresses the principles of the Hazard Analysis Critical Control Point (HACCP) concept as applied to animal health management strategy. Characteristics of the concept were analysed and compared with those of current animal health care strategies for disease risk identification and herd health management, insurance, and certification. HACCP is a hybrid strategy of quality control at both production process and product level. Animal health is considered a particular quality feature. We show that process control (expressed in terms of controlling both general and specific disease risk factors) and product control (expressed in terms of testing animals or animal products for specific disease agents) could form the basis for improving animal health. We conclude that HACCP provides ample opportunity for preventive health action and risk management at a relatively low cost in terms of labour, finance and documentation expenditure, at both the farm and sector level. Epidemiological field studies are currently needed to identify critical control points and to design HACCP procedures for livestock producers. In the long run, HACCP based animal health care can be further developed into a quality control systems approach to cover all aspects that are related, either directly or indirectly, to animal health.

  11. 77 FR 51619 - Source Specific Federal Implementation Plan for Implementing Best Available Retrofit Technology...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-24

    ... Energy and Non-Air Quality Environmental Impacts C. Comments on Factor Three--Existing Controls at FCPP D... compliance, (2) the energy and non-air quality environmental impacts of compliance, (3) any pollution control... installing and operating any of several equivalent controls on Units 1- 3, and through proper operation of...

  12. QA/QC in the laboratory

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hood, F.C.

    1992-05-01

    Quality assurance and quality control (QA/QC) of analytical chemistry laboratory activities are essential to the validity and usefulness of resultant data. However, in themselves, conventional QA/QC measures will not always ensure that fraudulent data are not generated. Conventional QA/QC measures are based on the assumption that work will be done in good faith; to assure against fraudulent practices, QA/QC measures must be tailored to specific analyses protocols in anticipation of intentional misapplication of those protocols. Application of specific QA/QC measures to ensure against fraudulent practices result in an increased administrative burden being placed on the analytical process; accordingly, in keepingmore » with graded QA philosophy, data quality objectives must be used to identify specific points of concern for special control to minimize the administrative impact.« less

  13. QA/QC in the laboratory. Session F

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hood, F.C.

    1992-05-01

    Quality assurance and quality control (QA/QC) of analytical chemistry laboratory activities are essential to the validity and usefulness of resultant data. However, in themselves, conventional QA/QC measures will not always ensure that fraudulent data are not generated. Conventional QA/QC measures are based on the assumption that work will be done in good faith; to assure against fraudulent practices, QA/QC measures must be tailored to specific analyses protocols in anticipation of intentional misapplication of those protocols. Application of specific QA/QC measures to ensure against fraudulent practices result in an increased administrative burden being placed on the analytical process; accordingly, in keepingmore » with graded QA philosophy, data quality objectives must be used to identify specific points of concern for special control to minimize the administrative impact.« less

  14. 38 CFR 36.4348 - Servicer Appraisal Processing Program.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... requirement, routine reviews of SAPP cases will be made by VA staff based upon quality control procedures..., that its activities do not deviate from high standards of integrity. The quality control system must include frequent, periodic audits that specifically address the appraisal review activity. These audits...

  15. 38 CFR 36.4348 - Servicer Appraisal Processing Program.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... requirement, routine reviews of SAPP cases will be made by VA staff based upon quality control procedures..., that its activities do not deviate from high standards of integrity. The quality control system must include frequent, periodic audits that specifically address the appraisal review activity. These audits...

  16. 38 CFR 36.4348 - Servicer Appraisal Processing Program.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... requirement, routine reviews of SAPP cases will be made by VA staff based upon quality control procedures..., that its activities do not deviate from high standards of integrity. The quality control system must include frequent, periodic audits that specifically address the appraisal review activity. These audits...

  17. 38 CFR 36.4348 - Servicer Appraisal Processing Program.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... requirement, routine reviews of SAPP cases will be made by VA staff based upon quality control procedures..., that its activities do not deviate from high standards of integrity. The quality control system must include frequent, periodic audits that specifically address the appraisal review activity. These audits...

  18. Quality Control Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document contains 18 units to consider for use in a tech prep competency profile for the occupation of quality control technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and…

  19. Quality of the parent-child interaction in young children with type 1 diabetes mellitus: study protocol.

    PubMed

    Nieuwesteeg, Anke M; Pouwer, Frans; van Bakel, Hedwig Ja; Emons, Wilco Hm; Aanstoot, Henk-Jan; Odink, Roelof; Hartman, Esther E

    2011-04-14

    In young children with type 1 diabetes mellitus (T1DM) parents have full responsibility for the diabetes-management of their child (e.g. blood glucose monitoring, and administering insulin). Behavioral tasks in childhood, such as developing autonomy, and oppositional behavior (e.g. refusing food) may interfere with the diabetes-management to achieve an optimal blood glucose control. Furthermore, higher blood glucose levels are related to more behavioral problems. So parents might need to negotiate with their child on the diabetes-management to avoid this direct negative effect. This interference, the negotiations, and the parent's responsibility for diabetes may negatively affect the quality of parent-child interaction. Nevertheless, there is little knowledge about the quality of interaction between parents and young children with T1DM, and the possible impact this may have on glycemic control and psychosocial functioning of the child. While widely used global parent-child interaction observational methods are available, there is a need for an observational tool specifically tailored to the interaction patterns of parents and children with T1DM. The main aim of this study is to construct a disease-specific observational method to assess diabetes-specific parent-child interaction. Additional aim is to explore whether the quality of parent-child interactions is associated with the glycemic control, and psychosocial functioning (resilience, behavioral problems, and quality of life). First, we will examine which situations are most suitable for observing diabetes-specific interactions. Then, these situations will be video-taped in a pilot study (N = 15). Observed behaviors are described into rating scales, with each scale describing characteristics of parent-child interactional behaviors. Next, we apply the observational tool on a larger scale for further evaluation of the instrument (N = 120). The parents are asked twice (with two years in between) to fill out questionnaires about psychosocial functioning of their child with T1DM. Furthermore, glycemic control (HbA1c) will be obtained from their medical records. A disease-specific observational tool will enable the detailed assessment of the quality of diabetes-specific parent-child interactions. The availability of such a tool will facilitate future (intervention) studies that will yield more knowledge about impact of parent-child interactions on psychosocial functioning, and glycemic control of children with T1DM.

  20. Quality of the parent-child interaction in young children with type 1 diabetes mellitus: study protocol

    PubMed Central

    2011-01-01

    Background In young children with type 1 diabetes mellitus (T1DM) parents have full responsibility for the diabetes-management of their child (e.g. blood glucose monitoring, and administering insulin). Behavioral tasks in childhood, such as developing autonomy, and oppositional behavior (e.g. refusing food) may interfere with the diabetes-management to achieve an optimal blood glucose control. Furthermore, higher blood glucose levels are related to more behavioral problems. So parents might need to negotiate with their child on the diabetes-management to avoid this direct negative effect. This interference, the negotiations, and the parent's responsibility for diabetes may negatively affect the quality of parent-child interaction. Nevertheless, there is little knowledge about the quality of interaction between parents and young children with T1DM, and the possible impact this may have on glycemic control and psychosocial functioning of the child. While widely used global parent-child interaction observational methods are available, there is a need for an observational tool specifically tailored to the interaction patterns of parents and children with T1DM. The main aim of this study is to construct a disease-specific observational method to assess diabetes-specific parent-child interaction. Additional aim is to explore whether the quality of parent-child interactions is associated with the glycemic control, and psychosocial functioning (resilience, behavioral problems, and quality of life). Methods/Design First, we will examine which situations are most suitable for observing diabetes-specific interactions. Then, these situations will be video-taped in a pilot study (N = 15). Observed behaviors are described into rating scales, with each scale describing characteristics of parent-child interactional behaviors. Next, we apply the observational tool on a larger scale for further evaluation of the instrument (N = 120). The parents are asked twice (with two years in between) to fill out questionnaires about psychosocial functioning of their child with T1DM. Furthermore, glycemic control (HbA1c) will be obtained from their medical records. Discussion A disease-specific observational tool will enable the detailed assessment of the quality of diabetes-specific parent-child interactions. The availability of such a tool will facilitate future (intervention) studies that will yield more knowledge about impact of parent-child interactions on psychosocial functioning, and glycemic control of children with T1DM. PMID:21492413

  1. Multi-Site Quality Assurance Project Plan for Wisconsin Public Service Corporation, Peoples Gas Light and Coke Company, and North Shore Gas

    EPA Pesticide Factsheets

    This Multi-Site QAPP presents the organization, data quality objectives (DQOs), a set of anticipated activities, sample analysis, data handling and specific Quality Assurance/Quality Control (QA/QC) procedures associated with Studies done in EPA Region 5

  2. 40 CFR 52.683 - Significant deterioration of air quality.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... quality. 52.683 Section 52.683 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The State of Idaho Rules for Control of Air Pollution in Idaho, specifically... the Clean Air Act for preventing significant deterioration of air quality. (b) The requirements of...

  3. 40 CFR 52.683 - Significant deterioration of air quality.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... quality. 52.683 Section 52.683 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The State of Idaho Rules for Control of Air Pollution in Idaho, specifically... the Clean Air Act for preventing significant deterioration of air quality. (b) The requirements of...

  4. 40 CFR 52.683 - Significant deterioration of air quality.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... quality. 52.683 Section 52.683 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The State of Idaho Rules for Control of Air Pollution in Idaho, specifically... Air Act for preventing significant deterioration of air quality. (b) The requirements of sections 160...

  5. 40 CFR 52.683 - Significant deterioration of air quality.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... quality. 52.683 Section 52.683 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The State of Idaho Rules for Control of Air Pollution in Idaho, specifically... the Clean Air Act for preventing significant deterioration of air quality. (b) The requirements of...

  6. Work stress, asthma control and asthma-specific quality of life: Initial evidence from a cross-sectional study.

    PubMed

    Hartmann, Bettina; Leucht, Verena; Loerbroks, Adrian

    2017-03-01

    Research has suggested that psychological stress is positively associated with asthma morbidity. One major source of stress in adulthood is one's occupation. However, to date, potential links of work stress with asthma control or asthma-specific quality of life have not been examined. We aimed to address this knowledge gap. In 2014/2015, we conducted a cross-sectional study among adults with asthma in Germany (n = 362). For the current analyses that sample was restricted to participants in employment and reporting to have never been diagnosed with chronic obstructive pulmonary disease (n = 94). Work stress was operationalized by the 16-item effort-reward-imbalance (ERI) questionnaire, which measures the subcomponents "effort", "reward" and "overcommitment." Participants further completed the Asthma Control Test and the Asthma Quality of Life Questionnaire-Sydney. Multivariable associations were quantified by linear regression and logistic regression. Effort, reward and their ratio (i.e. ERI ratio) did not show meaningful associations with asthma morbidity. By contrast, increasing levels of overcommitment were associated with poorer asthma control and worse quality of life in both linear regression (ß = -0.26, p = 0.01 and ß = 0.44, p < 0.01, respectively) and logistic regression (odds ratio [OR] = 1.87, 95% confidence interval [CI] = 1.14-3.07 and OR = 2.34, 95% CI = 1.32-4.15, respectively). The present study provides initial evidence of a positive relationship of work-related overcommitment with asthma control and asthma-specific quality of life. Longitudinal studies with larger samples are needed to confirm our findings and to disentangle the potential causality of associations.

  7. Audit and internal quality control in immunohistochemistry

    PubMed Central

    Maxwell, P; McCluggage, W

    2000-01-01

    Aims—Although positive and negative controls are performed and checked in surgical pathology cases undergoing immunohistochemistry, internal quality control procedures for immunohistochemistry are not well described. This study, comprising a retrospective audit, aims to describe a method of internal quality control for immunohistochemistry. A scoring system that allows comparison between cases is described. Methods—Two positive tissue controls for each month over a three year period (1996–1998) of the 10 antibodies used most frequently were evaluated. All test cases undergoing immunohistochemistry in the months of April in this three year period were also studied. When the test case was completely negative for a given antibody, the corresponding positive tissue control from that day was examined. A marking system was devised whereby each immunohistochemical slide was assessed out of a possible score of 8 to take account of staining intensity, uniformity, specificity, background, and counterstaining. Using this scoring system, cases were classified as showing optimal (7–8), borderline (5–6), or unacceptable (0–4) staining. Results—Most positive tissue controls showed either optimal or borderline staining with the exception of neurone specific enolase (NSE), where most slides were unacceptable or borderline as a result of a combination of low intensity, poor specificity, and excessive background staining. All test cases showed either optimal or borderline staining with the exception of a single case stained for NSE, which was unacceptable. Conclusions—This retrospective audit shows that immunohistochemically stained slides can be assessed using this scoring system. With most antibodies, acceptable staining was achieved in most cases. However, there were problems with staining for NSE, which needs to be reviewed. Laboratories should use a system such as this to evaluate which antibodies regularly result in poor staining so that they can be excluded from panels. Routine evaluation of immunohistochemical staining should become part of everyday internal quality control procedures. Key Words: immunohistochemistry • audit • internal quality control PMID:11265178

  8. Alcohol-specific parenting, adolescents' self-control, and alcohol use: a moderated mediation model.

    PubMed

    Koning, Ina M; van den Eijnden, Regina J J M; Vollebergh, Wilma A M

    2014-01-01

    There is convincing evidence that parental rules about alcohol are important in curbing adolescents' alcohol use. However, little is known about the mechanisms through which the direct link between alcohol-specific parenting and alcohol use is obtained. In this study, we investigated the mediating effect of adolescent self-control on the relationship between alcohol-specific rules and adolescents' drinking behavior and whether this mediation effect depends on the level of quality of communication. A total of 883 adolescents participated in this longitudinal study at ages 13, 14, and 15 years. Strict rules predicted lower rates of drinking, but no direct effect of the quality of communication on adolescents' alcohol use was found. A higher level of self-control was related to lower rates of drinking in adolescents. The indirect effect of rules about alcohol through adolescents' self-control was statistically significant, yet only in adolescents with high qualitative parent-child communication about alcohol. In adolescents with low quality of parent-child communication, self-control was not related to drinking. These findings imply that strict rule setting in combination with qualitative parent-child communication is an important target for prevention. In addition, findings point at the importance of high qualitative parent-child communication for adolescents' motivation to engage in self-control to avoid drinking.

  9. 21 CFR 111.525 - What requirements apply to a returned dietary supplement that quality control personnel approve...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... FOR DIETARY SUPPLEMENTS Returned Dietary Supplements § 111.525 What requirements apply to a returned dietary supplement that quality control personnel approve for reprocessing? (a) You must ensure that any returned dietary supplements that are reprocessed meet all product specifications established in accordance...

  10. 21 CFR 111.525 - What requirements apply to a returned dietary supplement that quality control personnel approve...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... FOR DIETARY SUPPLEMENTS Returned Dietary Supplements § 111.525 What requirements apply to a returned dietary supplement that quality control personnel approve for reprocessing? (a) You must ensure that any returned dietary supplements that are reprocessed meet all product specifications established in accordance...

  11. 21 CFR 111.525 - What requirements apply to a returned dietary supplement that quality control personnel approve...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... FOR DIETARY SUPPLEMENTS Returned Dietary Supplements § 111.525 What requirements apply to a returned dietary supplement that quality control personnel approve for reprocessing? (a) You must ensure that any returned dietary supplements that are reprocessed meet all product specifications established in accordance...

  12. 21 CFR 111.525 - What requirements apply to a returned dietary supplement that quality control personnel approve...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... FOR DIETARY SUPPLEMENTS Returned Dietary Supplements § 111.525 What requirements apply to a returned dietary supplement that quality control personnel approve for reprocessing? (a) You must ensure that any returned dietary supplements that are reprocessed meet all product specifications established in accordance...

  13. 21 CFR 111.525 - What requirements apply to a returned dietary supplement that quality control personnel approve...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... FOR DIETARY SUPPLEMENTS Returned Dietary Supplements § 111.525 What requirements apply to a returned dietary supplement that quality control personnel approve for reprocessing? (a) You must ensure that any returned dietary supplements that are reprocessed meet all product specifications established in accordance...

  14. Math Problems for Water Quality Control Personnel, Instructor's Manual. Second Edition.

    ERIC Educational Resources Information Center

    Delvecchio, Fred; Brutsch, Gloria

    This document is the instructor's manual for a course in mathematics for water quality control personnel. It is designed so a program may be designed for a specific facility. The problem structures are arranged alphabetically by treatment process. Charts, graphs and/or drawings representing familiar data forms contain the necessary information to…

  15. Quality-assurance plan for the analysis of fluvial sediment by laboratories of the U.S. Geological Survey

    USGS Publications Warehouse

    Matthes, Wilbur J.; Sholar, Clyde J.; George, John R.

    1992-01-01

    This report describes procedures used by the Iowa District sediment laboratory of the U.S. Geological Survey to assure the quality of sediment-laboratory data. These procedures can be used by other U.S. Geological Survey laboratories regardless of size and type of operation for quality assurance and quality control of specific sediment-laboratory processes. Also described are the equipment, specifications, calibration and maintenance, and the protocol for methods used in the analyses of fluvial sediment for concentration or particle size.

  16. 40 CFR 52.683 - Significant deterioration of air quality.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... quality. 52.683 Section 52.683 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The State of Idaho Rules for Control of Air Pollution in Idaho, specifically... quality. (b) The requirements of sections 160 through 165 of the Clean Air Act are not met for Indian...

  17. Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York--July 1999 through June 2001

    USGS Publications Warehouse

    Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

    2006-01-01

    The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's LabMaster data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality-control samples analyzed from July 1999 through June 2001. Results for the quality-control samples for 18 analytical procedures were evaluated for bias and precision. Control charts indicate that data for eight of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, total monomeric aluminum, total aluminum, calcium, chloride and nitrate (ion chromatography and colormetric method) and sulfate. The total aluminum and dissolved organic carbon procedures were biased throughout the analysis period for the high-concentration sample, but were within control limits. The calcium and specific conductance procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The magnesium procedure was biased for the high-concentration and low concentration samples, but was within control limits. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 14 of 15 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for dissolved organic carbon. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 17 of the 18 analytes. At least 90 percent of the samples met data-quality objectives for all analytes except ammonium (81 percent of samples met objectives), chloride (75 percent of samples met objectives), and sodium (86 percent of samples met objectives). Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated good data quality over the time period, with most ratings for each sample in the good to excellent range. The P-sample (low-ionic-strength constituents) analysis had one satisfactory rating for the specific conductance procedure in one study. The T-sample (trace constituents) analysis had one satisfactory rating for the aluminum procedure in one study and one unsatisfactory rating for the sodium procedure in another. The remainder of the samples had good or excellent ratings for each study. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 89 percent of the samples met data-quality objectives for 10 of the 14 analytes; the exceptions were ammonium, total aluminum, dissolved organic carbon, and sodium. Results indicate a positive bias for the ammonium procedure in all studies. Data-quality objectives were not met in 50 percent of samples analyzed for total aluminum, 38 percent of samples analyzed for dissolved organic carbon, and 27 percent of samples analyzed for sodium. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 91 percent of the samples analyzed for calcium, chloride, fluoride, magnesium, pH, potassium, and sulfate. Data-quality objectives were met by 75 percent of the samples analyzed for sodium and 58 percent of the samples analyzed for specific conductance.

  18. Comparison of Effectiveness of the Metacognition Treatment and the Mindfulness-Based Stress Reduction Treatment on Global and Specific Life Quality of Women with Breast Cancer

    PubMed Central

    Rahmani, Soheila; Talepasand, Siavash; Ghanbary-Motlagh, ALi

    2014-01-01

    Background This study is conducted to compare the metacognition treatment and the mindfulness-based stress reduction treatment on life quality of women with breast cancer. Methods In a quasi-experimental design, with pre-test, post-test and control group, 36 patients with diagnosis of breast cancer, among patients who referred to the Division of Oncology and Radiotherapy of Imam Hossein hospital in Tehran, were selected in accessible way and were assigned randomly to three experimental groups, the first group receiving meta-cognition treatment (n=12), the second one receiving mindfulness-based stress reduction program (n=12), and the other was the control group. Participants completed global life quality in cancer patient's questionnaire and specific quality of life in breast cancer patient's questionnaire in three stages: baseline, after intervention and two-month follow-up. Data were analyzed using the multivariate repeated measurement model. Results Findings showed both treatments were effective in improving global and specific quality of life in patients with breast cancer. The mindfulness -based stress reduction treatment excelled in functions and roles, fatigue, pain, future perspective and treatment side effects symptoms at the end of the treatment and follow-up in comparison to the metacognition treatment. Conclusion Results of this research showed the mindfulness-based stress reduction treatment can be effective in improving global and specific life quality of women with breast cancer and is a selective method for improving quality of life in patients. PMID:25628839

  19. PCMO L01-Setting Specifications for Biological Investigational Medicinal Products.

    PubMed

    Krause, Stephan O

    2015-01-01

    This paper provides overall guidance and best practices for the setting of specifications for clinical biological drug substances and drug products within the framework of ICH guidelines on pharmaceutical development [Q8(R2) and Q11], quality risk management (Q9), and quality systems (Q10). A review is provided of the current regulatory expectations for the specification setting process as part of a control strategy during product development, pointing to existing challenges for the investigational new drug/investigational medicinal product dossier (IND/IMPD) sponsor. A case study illustrates how the investigational medicinal product specification revision process can be managed within a flexible quality system, and how specifications can be set and justified for early and late development stages. This paper provides an overview for the setting of product specifications for investigational medicinal products used in clinical trials. A case study illustrates how product specifications of investigational medicinal products can be justified and managed within a modern product quality system. © PDA, Inc. 2015.

  20. Quality control analysis : part V : review of data generated by statistical specifications on asphaltic concrete : final report.

    DOT National Transportation Integrated Search

    1975-12-01

    The primary objective of this study was to review the data generated by projects governed by statistically oriented system of specifications for the control and acceptance of asphaltic concrete and to recommend any revisions that may be deemed necess...

  1. Space shuttle flying qualities and criteria assessment

    NASA Technical Reports Server (NTRS)

    Myers, T. T.; Johnston, D. E.; Mcruer, Duane T.

    1987-01-01

    Work accomplished under a series of study tasks for the Flying Qualities and Flight Control Systems Design Criteria Experiment (OFQ) of the Shuttle Orbiter Experiments Program (OEX) is summarized. The tasks involved review of applicability of existing flying quality and flight control system specification and criteria for the Shuttle; identification of potentially crucial flying quality deficiencies; dynamic modeling of the Shuttle Orbiter pilot/vehicle system in the terminal flight phases; devising a nonintrusive experimental program for extraction and identification of vehicle dynamics, pilot control strategy, and approach and landing performance metrics, and preparation of an OEX approach to produce a data archive and optimize use of the data to develop flying qualities for future space shuttle craft in general. Analytic modeling of the Orbiter's unconventional closed-loop dynamics in landing, modeling pilot control strategies, verification of vehicle dynamics and pilot control strategy from flight data, review of various existent or proposed aircraft flying quality parameters and criteria in comparison with the unique dynamic characteristics and control aspects of the Shuttle in landing; and finally a summary of conclusions and recommendations for developing flying quality criteria and design guides for future Shuttle craft.

  2. 10 CFR 71.101 - Quality assurance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... quality assurance actions related to control of the physical characteristics and quality of the material... through 71.137 and satisfying any specific provisions that are applicable to the licensee's activities... assurance requirement's importance to safety. (c) Approval of program. (1) Before the use of any package for...

  3. The Effect of the MassHealth Hospital Pay-for-Performance Program on Quality

    PubMed Central

    Ryan, Andrew M; Blustein, Jan

    2011-01-01

    Objective To test the effect of Massachusetts Medicaid's (MassHealth) hospital-based pay-for-performance (P4P) program, implemented in 2008, on quality of care for pneumonia and surgical infection prevention (SIP). Data Hospital Compare process of care quality data from 2004 to 2009 for acute care hospitals in Massachusetts (N = 62) and other states (N = 3,676) and American Hospital Association data on hospital characteristics from 2005. Study Design Panel data models with hospital fixed effects and hospital-specific trends are estimated to test the effect of P4P on composite quality for pneumonia and SIP. This base model is extended to control for the completeness of measure reporting. Further sensitivity checks include estimation with propensity-score matched control hospitals, excluding hospitals in other P4P programs, varying the time period during which the program was assumed to have an effect, and testing the program effect across hospital characteristics. Principal Findings Estimates from our preferred specification, including hospital fixed effects, trends, and the control for measure completeness, indicate small and nonsignificant program effects for pneumonia (−0.67 percentage points, p>.10) and SIP (−0.12 percentage points, p>.10). Sensitivity checks indicate a similar pattern of findings across specifications. Conclusions Despite offering substantial financial incentives, the MassHealth P4P program did not improve quality in the first years of implementation. PMID:21210796

  4. The contribution of goal specificity to goal achievement in collaborative goal setting for the management of asthma.

    PubMed

    Smith, Lorraine; Alles, Chehani; Lemay, Kate; Reddel, Helen; Saini, Bandana; Bosnic-Anticevich, Sinthia; Emmerton, Lynne; Stewart, Kay; Burton, Debbie; Krass, Ines; Armour, Carol

    2013-01-01

    Goal setting was investigated as part of an implementation trial of an asthma management service (PAMS) conducted in 96 Australian community pharmacies. Patients and pharmacists identified asthma-related issues of concern to the patient and collaboratively set goals to address these. Although goal setting is commonly integrated into disease state management interventions, the nature of goals, and their contribution to goal attainment and health outcomes are not well understood. To identify and describe: 1) goals set collaboratively between adult patients with asthma and their pharmacist, 2) goal specificity and goal achievement, and 3) describe the relationships between specificity, achievement, asthma control and asthma-related quality of life. Measures of goal specificity, and goal achievement were developed and applied to patient data records. Goals set were thematically analyzed into goal domains. Proportions of goals set, goals achieved and their specificity were calculated. Correlational and regression analyses were undertaken to determine the relationships between goal specificity, goal achievement, asthma control and asthma-related quality of life. Data were drawn from 498 patient records. Findings showed that patients set a wide range and number of asthma-related goals (N = 1787) and the majority (93%) were either achieved or being working toward by the end of the study. Goal achievement was positively associated with specific and moderately specific goals, but not non-specific goals. However, on closer inspection, an inconsistent pattern of relationships emerged as a function of goal domain. Findings also showed that goal setting was associated with end-of-study asthma control but not to asthma-related quality of life. Pharmacists can help patients to set achievable and specific asthma management goals, and these have the potential to directly impact health outcomes such as asthma control. Goal specificity appears to be an important feature in the achievement of goals, but other factors may also play a role. Copyright © 2013 Elsevier Inc. All rights reserved.

  5. An Instructional Delivery System for Manpower Management: A Report for Water Pollution Control Agencies. Second Edition.

    ERIC Educational Resources Information Center

    New York State Dept. of Environmental Conservation, Albany.

    This report contains information to assist organizations and personnel responsible for the quality and quantity of operators available for water quality control efforts. The text discusses in detail the current developments in operator instructional programs. Each of the seven sections of this report deals with a specific aspect of manpower…

  6. Control design for future agile fighters

    NASA Technical Reports Server (NTRS)

    Murphy, Patrick C.; Davidson, John B.

    1991-01-01

    The CRAFT control design methodology is presented. CRAFT stands for the design objectives addressed, namely, Control power, Robustness, Agility, and Flying Qualities Tradeoffs. The approach combines eigenspace assignment, which allows for direct specification of eigenvalues and eigenvectors, and a graphical approach for representing control design metrics that captures numerous design goals in one composite illustration. The methodology makes use of control design metrics from four design objective areas, namely, control power, robustness, agility, and flying qualities. An example of the CRAFT methodology as well as associated design issues are presented.

  7. Tree leaf control on low flow water quality in a small Virginia stream

    USGS Publications Warehouse

    Slack, K.V.; Feltz, H.R.

    1968-01-01

    Impaired water quality in a small stream was related to autumn leaf fall from riparian vegetation. Dissolved oxygen and pH decreased, and water color, specific conductance, iron, manganese, and bicarbonate values increased as the rate of leaf fall increased. Similar quality changes occurred in laboratory cultures of tree leaves in filtered stream water, but the five leaf species studied produced widely differing results. Stream quality improved rapidly following channel flushing by storm flow. Organic loading by tree litter can exert significant control on water composition, especially during low flow.

  8. Assays for Qualification and Quality Stratification of Clinical Biospecimens Used in Research: A Technical Report from the ISBER Biospecimen Science Working Group.

    PubMed

    Betsou, Fay; Bulla, Alexandre; Cho, Sang Yun; Clements, Judith; Chuaqui, Rodrigo; Coppola, Domenico; De Souza, Yvonne; De Wilde, Annemieke; Grizzle, William; Guadagni, Fiorella; Gunter, Elaine; Heil, Stacey; Hodgkinson, Verity; Kessler, Joseph; Kiehntopf, Michael; Kim, Hee Sung; Koppandi, Iren; Shea, Katheryn; Singh, Rajeev; Sobel, Marc; Somiari, Stella; Spyropoulos, Demetri; Stone, Mars; Tybring, Gunnel; Valyi-Nagy, Klara; Van den Eynden, Gert; Wadhwa, Lalita

    2016-10-01

    This technical report presents quality control (QC) assays that can be performed in order to qualify clinical biospecimens that have been biobanked for use in research. Some QC assays are specific to a disease area. Some QC assays are specific to a particular downstream analytical platform. When such a qualification is not possible, QC assays are presented that can be performed to stratify clinical biospecimens according to their biomolecular quality.

  9. Assays for Qualification and Quality Stratification of Clinical Biospecimens Used in Research: A Technical Report from the ISBER Biospecimen Science Working Group

    PubMed Central

    Bulla, Alexandre; Cho, Sang Yun; Clements, Judith; Chuaqui, Rodrigo; Coppola, Domenico; De Souza, Yvonne; De Wilde, Annemieke; Grizzle, William; Guadagni, Fiorella; Gunter, Elaine; Heil, Stacey; Hodgkinson, Verity; Kessler, Joseph; Kiehntopf, Michael; Kim, Hee Sung; Koppandi, Iren; Shea, Katheryn; Singh, Rajeev; Sobel, Marc; Somiari, Stella; Spyropoulos, Demetri; Stone, Mars; Tybring, Gunnel; Valyi-Nagy, Klara; Van den Eynden, Gert; Wadhwa, Lalita

    2016-01-01

    This technical report presents quality control (QC) assays that can be performed in order to qualify clinical biospecimens that have been biobanked for use in research. Some QC assays are specific to a disease area. Some QC assays are specific to a particular downstream analytical platform. When such a qualification is not possible, QC assays are presented that can be performed to stratify clinical biospecimens according to their biomolecular quality. PMID:27046294

  10. Quality specifications in postgraduate medical e-learning: an integrative literature review leading to a postgraduate medical e-learning model.

    PubMed

    De Leeuw, R A; Westerman, Michiel; Nelson, E; Ket, J C F; Scheele, F

    2016-07-08

    E-learning is driving major shifts in medical education. Prioritizing learning theories and quality models improves the success of e-learning programs. Although many e-learning quality standards are available, few are focused on postgraduate medical education. We conducted an integrative review of the current postgraduate medical e-learning literature to identify quality specifications. The literature was thematically organized into a working model. Unique quality specifications (n = 72) were consolidated and re-organized into a six-domain model that we called the Postgraduate Medical E-learning Model (Postgraduate ME Model). This model was partially based on the ISO-19796 standard, and drew on cognitive load multimedia principles. The domains of the model are preparation, software design and system specifications, communication, content, assessment, and maintenance. This review clarified the current state of postgraduate medical e-learning standards and specifications. It also synthesized these specifications into a single working model. To validate our findings, the next-steps include testing the Postgraduate ME Model in controlled e-learning settings.

  11. Quality assurance tendering and awarding contracts

    NASA Astrophysics Data System (ADS)

    1994-12-01

    Standards relating to quality control can be significantly useful when tendering for and awarding contracts. However, because it is sometimes difficult to express these standards in palpable economic terms, they can (practically) never be applied as criteria for awarding contracts in accordance with U.A.R. (Uniform General Standards) 1986. Therefore it would be advisable in the future to regard the availability of a (certified) system of quality control as being a standard requirement. To this end, a paragraph setting requirements for a quality control plan should be included in the specification. A quality control plan will be required on awarding a contract. This envisaged scenario can best achieved through a transitional phase. During this period there will be opportunity enough for removing any shortcomings in the wording and for considering standards to be required and assessment procedures.

  12. [Technological innovations in radiation oncology require specific quality controls].

    PubMed

    Lenaerts, E; Mathot, M

    2014-01-01

    During the last decade, the field of radiotherapy has benefited from major technological innovations and continuously improving treatment efficacy, comfort and safety of patients. This mainly concerns the imaging techniques that allow 4D CT scan recording the respiratory phases, on-board imaging on linear accelerators that ensure perfect positioning of the patient for treatment and irradiation techniques that reduce very significantly the duration of treatment sessions without compromising quality of the treatment plan, including IMRT (Intensity Modulated Radiation Therapy) and VMAT (Volumetric Modulated Arc therapy). In this context of rapid technological change, it is the responsibility of medical physicists to regularly and precisely monitor the perfect functioning of new techniques to ensure patient safety. This requires the use of specific quality control equipment best suited to these new techniques. We will briefly describe the measurement system Delta4 used to control individualized treatment plan for each patient treated with VMAT technology.

  13. Requirements for modeling airborne microbial contamination in space stations

    NASA Astrophysics Data System (ADS)

    Van Houdt, Rob; Kokkonen, Eero; Lehtimäki, Matti; Pasanen, Pertti; Leys, Natalie; Kulmala, Ilpo

    2018-03-01

    Exposure to bioaerosols is one of the facets that affect indoor air quality, especially for people living in densely populated or confined habitats, and is associated to a wide range of health effects. Good indoor air quality is thus vital and a prerequisite for fully confined environments such as space habitats. Bioaerosols and microbial contamination in these confined space stations can have significant health impacts, considering the unique prevailing conditions and constraints of such habitats. Therefore, biocontamination in space stations is strictly monitored and controlled to ensure crew and mission safety. However, efficient bioaerosol control measures rely on solid understanding and knowledge on how these bioaerosols are created and dispersed, and which factors affect the survivability of the associated microorganisms. Here we review the current knowledge gained from relevant studies in this wide and multidisciplinary area of bioaerosol dispersion modeling and biological indoor air quality control, specifically taking into account the specific space conditions.

  14. Resources, Number 42. Some Highlights of 1972.

    ERIC Educational Resources Information Center

    Resources for the Future, Inc., Washington, DC.

    Reported are some significant events of 1972 related to the use and management of natural resources. Topics summarized include federal legislation for environmental quality; specific legislation for water quality; the development of state plans for achieving standards and controls related to air quality; population growth; land use and land…

  15. Comprehensive HPTLC Fingerprinting for Quality Control of an Herbal Drug - The Case of Angelica gigas Root.

    PubMed

    Frommenwiler, Débora Arruda; Kim, Jonghwan; Yook, Chang-Soo; Tran, Thi Thu Trang; Cañigueral, Salvador; Reich, Eike

    2018-04-01

    The quality of herbal drugs is usually controlled using several tests recommended in a monograph. HPTLC is the method of choice for identification in many pharmacopoeias. If combined with a suitable reference material for comparison, HPTLC can provide information beyond identification and thus may simplify quality control. This paper describes, as a proof of concept, how HPTLC can be applied to define specifications for an herbal reference material and to control the quality of an herbal drug according to these specifications. Based on multiple batches of cultivated Angelica gigas root, a specific HPTLC method for identification was optimized. This method can distinguish 27 related species. It also can detect the presence of mixtures of A. gigas with two other Angelica species traded as "Dang gui" and is suitable as well for quantitative assessment of samples in a test for minimum content of the sum of decursin and decursinol angelate. The new concept of "comprehensive HPTLC fingerprinting" is proposed: HPTLC fingerprints (images), which are used for identification, are converted into peak profiles and the intensities of selected zones are quantitatively compared to those of the corresponding zones of the reference material. Following a collaborative trial involving three laboratories in three countries, the method was applied to check the quality of further candidates for establishing an appropriate reference material. In conclusion, this case demonstrates that a single HPTLC analysis can provide information about identity, purity, and minimum content of markers of an herbal drug. Georg Thieme Verlag KG Stuttgart · New York.

  16. The influence of carbohydrate-based fat replacers with and without emulsifiers on the quality characteristics of lowfat cake.

    PubMed

    Khalil, A H

    1998-01-01

    Physical and sensory characteristics of cakes prepared with either the carbohydrate-based fat replacers N-Flate, Paselli MD 10 and Litesse (0, 25, 50 and 75% of fat weight) or fat replacers plus emulsifier (mono- and diglycerides; 0 and 3% of flour weight) were studied. Specific gravity of the batter was significantly (p < or = 0.05) improved by using the carbohydrate-based fat replacers, especially at the 25 and 50% replacement levels. The combination of the emulsifier with either Paselli MD 10 or Litesse also enhanced the specific gravity. Cakes prepared with fat replacers at the 25 and 50% levels had higher volumes, specific volume and standing heights than those of the control. Cakes prepared with fat replacers at the 25, 50 and 75% levels were more compressible than the control. Cakes prepared with Paselli MD 10 had the highest volumes, specific volume, standing heights and compressibilities. Incorporation of emulsifier with fat replacers improved cake volumes, standing heights and compressibilities. Cakes prepared with fat replacers exhibited higher crust and crumb color values compared to the control. Cakes prepared with 25 or 50% fat replacers had higher mean scores for flavor, softness and eating quality than the control. Incorporation of emulsifier with fat replacers did not affect the crust color, crumb color and flavor, but significantly (p < or = 0.05) improved softness and eating quality.

  17. The role of trait mindfulness in quality of life and asthma control among adolescents with asthma.

    PubMed

    Cillessen, Linda; van de Ven, Monique O; Karremans, Johan C

    2017-08-01

    The current study focused on the role of trait mindfulness in asthma-related quality of life (QoL) and asthma control in adolescent asthma patients. Furthermore, potential underlying mechanisms (general and asthma-specific stress) of this relationship were investigated. In this cross-sectional study, questionnaire data of 94 adolescents with asthma that were prescribed daily asthma medication were included. Two Structural Equation Models (SEMs), a direct model and an indirect model, were tested. We found that trait mindfulness was directly related to asthma-related QoL, but not to asthma control. The relationship between trait mindfulness and asthma-related QoL was explained by asthma-specific, but not by general stress. Furthermore, an indirect relation from mindfulness to asthma control via asthma-specific stress was found. Cross-sectional evidence for a relation between mindfulness and asthma-related QoL is found. These findings may point to the possibility that an intervention aimed at increasing mindfulness could be a promising tool to improve asthma-related QoL in adolescents via a decrease in asthma-specific stress. Copyright © 2017. Published by Elsevier Inc.

  18. Military specifications

    NASA Technical Reports Server (NTRS)

    Reynolds, Philip

    1987-01-01

    The current situation relative to the military specification is that there is not one specific model of turbulence which people are using. Particular disagreement exists on how turbulence levels will vary with qualitative analysis. It does not tie one down to specifics. When it comes to flying quality specifications, many feel that one should stay with the definitions of the Cooper-Harper rating scale but allow the levels to shift depending on the level of turbulence. There is a ride quality specification in the MIL-SPEC having to do with flight control systems design that is related to a turbulence model. This spec (MIL-F8785C) and others are discussed.

  19. [Effects of a dance therapy programme on quality of life, sleep and blood pressure in middle-aged women: A randomised controlled trial].

    PubMed

    Serrano-Guzmán, María; Valenza-Peña, Carmen M; Serrano-Guzmán, Carmen; Aguilar-Ferrándiz, Encarnación; Valenza-Demet, Gerald; Villaverde-Gutiérrez, Carmen

    2016-10-21

    Evidence suggests that dance therapy may have positive effects in areas such as cardiovascular parameters and sleep. The aim of the present study is to explore whether a dance therapy programme improves sleep and blood pressure in a population of middle-aged pre-hypertensive and hypertensive women. A randomised controlled trial was conducted, in which participants were assigned to one of 2 groups: standard care (with usual activities and medication) or dance therapy (in which the participants followed a dance therapy programme, in addition to their medication). The intervention was an 8-week, 3-times-per-week, progressive and specific group dance-training programme. The dance steps were specifically designed to improve balance by shifting the body and relocating the centre of gravity. The main measures obtained were blood pressure, sleep quality and quality of life, measured by the Pittsburgh Sleep Quality Index and the European Quality of Life Questionnaire. Sixty-seven pre-hypertensive and hypertensive middle-aged women were randomised to either an intervention group (n=35) or a control group (n=32) after baseline testing. The intervention group reported a significant improvement in blood pressure values (P<.01), as well as in sleep quality (P<.05) and quality of life (P<.001), compared to the control group. The dance therapy programme improved blood pressure, sleep and quality of life in pre-hypertensive and hypertensive middle-aged women, and constitutes an interesting basis for larger-scale research. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

  20. Multibehavioural Interventions with a Focus on Specific Energy Balance-Related Behaviours Can Affect Diet Quality in Preschoolers from Six European Countries: The ToyBox-Study

    PubMed Central

    Pinket, An-Sofie; De Craemer, Marieke; Huybrechts, Inge; De Bourdeaudhuij, Ilse; Deforche, Benedicte; Cardon, Greet; Androutsos, Odysseas; Koletzko, Berthold; Moreno, Luis A.; Socha, Piotr; Iotova, Violeta; Manios, Yannis; Van Lippevelde, Wendy

    2017-01-01

    The present study aimed to examine whether a multibehavioural intervention with a focus on specific energy balance-related behaviours can affect total diet quality and its four subcomponents in European preschoolers and to investigate if these intervention effects differed by socioeconomic status (SES). Parents/caregivers of 3.5 to 5.5 year-olds (n = 4968) recruited through kindergartens in six European countries within the ToyBox-study completed questionnaires on socio-demographics and a food frequency questionnaire on their preschoolers’ diet. To assess intervention effects and differences by SES, multilevel repeated measures analyses were conducted. In contrast to no significant difference in total diet quality, in both the intervention and control group, the dietary quality and dietary equilibrium increased, with a larger increase in the intervention group (mean difference quality: +3.4%; mean difference equilibrium: +0.9%) compared to the control group (quality: +1.5%; equilibrium: +0.2%). SES was not a significant moderator for intervention effects on total diet quality, nor for the four subcomponents. This study indicates that multibehavioural interventions with a focus on specific energy balance-related behaviours in preschoolers not only affect those targeted behaviours, but can also have more generalized effects. The ToyBox-intervention effects were similar for both lower and high SES preschoolers. PMID:28489048

  1. Long-term pavement performance indicators for failed materials.

    DOT National Transportation Integrated Search

    2016-04-01

    State Transportation Agencies (STAs) use quality control/quality assurance (QC/QA) specifications to guide the testing and inspection of : road pavement construction. Although failed materials of pavement rarely occur in practice, it is critical to h...

  2. Statewide implementation of Pave-IR in the Texas Department of Transportation.

    DOT National Transportation Integrated Search

    2012-02-01

    This project conducted work to complement implementation of Pave-IR into the Texas Department of : Transportations hot-mix-asphalt quality control/quality assurance specification. Pave-IR provides real-time : thermal profiling of paving operations...

  3. Many roads may lead to Rome: Selected features of quality control within environmental assessment systems in the US, NL, CA, and UK

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Günther, Markus, E-mail: markus.guenther@tu-berlin.de; Geißler, Gesa; Köppel, Johann

    As there is no one-and-only concept on how to precisely define and establish quality control (QC) or quality assurance (QA) in the making of environmental assessments (EA), this paper presents selected features of international approaches that address quality in EA systems in the USA, the Netherlands, Canada, and the United Kingdom. Based on explanative case studies, we highlight the embedding of specific quality control features within the EA systems, the objectives and processes, and relevant transparency challenges. Such features of QC/QA approaches can be considered in cases where substantial quality control and assurance efforts are still missing. Yet further researchmore » needs to be conducted on the efficacy of these approaches, which remains beyond the scope of this study. - Highlights: • We present four tools for quality control and assurance from different EA systems. • Approaches vary in institutional setting, objectives, procedures, and transparency. • Highlighted features might provide guidance in cases where QC/QA is still lacking.« less

  4. Real Time Quality Control Methods for Cued EMI Data Collection

    DTIC Science & Technology

    2016-03-14

    contents be construed as reflecting the official policy or position of the Department of Defense. Reference herein to any specific commercial product...This project evaluated the effectiveness of in-field quality control (QC) procedures during cued electromagnetic induction (EMI) data collection. The...electromagnetic induction ESTCP Environmental Security Technology Certification Program hr hour ISO Industry Standard Object IVS Instrument

  5. CONDUIT: A New Multidisciplinary Integration Environment for Flight Control Development

    NASA Technical Reports Server (NTRS)

    Tischler, Mark B.; Colbourne, Jason D.; Morel, Mark R.; Biezad, Daniel J.; Levine, William S.; Moldoveanu, Veronica

    1997-01-01

    A state-of-the-art computational facility for aircraft flight control design, evaluation, and integration called CONDUIT (Control Designer's Unified Interface) has been developed. This paper describes the CONDUIT tool and case study applications to complex rotary- and fixed-wing fly-by-wire flight control problems. Control system analysis and design optimization methods are presented, including definition of design specifications and system models within CONDUIT, and the multi-objective function optimization (CONSOL-OPTCAD) used to tune the selected design parameters. Design examples are based on flight test programs for which extensive data are available for validation. CONDUIT is used to analyze baseline control laws against pertinent military handling qualities and control system specifications. In both case studies, CONDUIT successfully exploits trade-offs between forward loop and feedback dynamics to significantly improve the expected handling, qualities and minimize the required actuator authority. The CONDUIT system provides a new environment for integrated control system analysis and design, and has potential for significantly reducing the time and cost of control system flight test optimization.

  6. Quality Attribute Techniques Framework

    NASA Astrophysics Data System (ADS)

    Chiam, Yin Kia; Zhu, Liming; Staples, Mark

    The quality of software is achieved during its development. Development teams use various techniques to investigate, evaluate and control potential quality problems in their systems. These “Quality Attribute Techniques” target specific product qualities such as safety or security. This paper proposes a framework to capture important characteristics of these techniques. The framework is intended to support process tailoring, by facilitating the selection of techniques for inclusion into process models that target specific product qualities. We use risk management as a theory to accommodate techniques for many product qualities and lifecycle phases. Safety techniques have motivated the framework, and safety and performance techniques have been used to evaluate the framework. The evaluation demonstrates the ability of quality risk management to cover the development lifecycle and to accommodate two different product qualities. We identify advantages and limitations of the framework, and discuss future research on the framework.

  7. 21 CFR 226.58 - Laboratory controls.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Laboratory controls. 226.58 Section 226.58 Food...: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR TYPE A MEDICATED ARTICLES Product Quality Control § 226.58 Laboratory controls. Laboratory controls shall include the establishment of adequate specifications and test...

  8. 21 CFR 226.58 - Laboratory controls.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Laboratory controls. 226.58 Section 226.58 Food...: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR TYPE A MEDICATED ARTICLES Product Quality Control § 226.58 Laboratory controls. Laboratory controls shall include the establishment of adequate specifications and test...

  9. 21 CFR 226.58 - Laboratory controls.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Laboratory controls. 226.58 Section 226.58 Food...: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR TYPE A MEDICATED ARTICLES Product Quality Control § 226.58 Laboratory controls. Laboratory controls shall include the establishment of adequate specifications and test...

  10. 23 CFR 650.207 - Plans, specifications and estimates.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Erosion and Sediment Control on Highway Construction Projects... highway project designs for the control of erosion and sedimentation and the protection of water quality...

  11. 23 CFR 650.207 - Plans, specifications and estimates.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Erosion and Sediment Control on Highway Construction Projects... highway project designs for the control of erosion and sedimentation and the protection of water quality...

  12. 23 CFR 650.207 - Plans, specifications and estimates.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Erosion and Sediment Control on Highway Construction Projects... highway project designs for the control of erosion and sedimentation and the protection of water quality...

  13. 23 CFR 650.207 - Plans, specifications and estimates.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Erosion and Sediment Control on Highway Construction Projects... highway project designs for the control of erosion and sedimentation and the protection of water quality...

  14. 23 CFR 650.207 - Plans, specifications and estimates.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Erosion and Sediment Control on Highway Construction Projects... highway project designs for the control of erosion and sedimentation and the protection of water quality...

  15. [Comparison and review on specifications of fermented Cordyceps sinensis products].

    PubMed

    Yang, Ping; Zhao, Xiao-Xia; Zhang, Yong-Wen

    2018-02-01

    There are five kinds of fermented Cordyceps crude drug and their preparations that have been approved as medicine on the market. Since the initial strains of the crude drug were all isolated from natural Cordyceps sinensis， they have similar names， chemical components and even clinical applications. However， because of the different strain species and fermentation processes， there was significant difference in quality. As a result， they should be clearly distinguished in clinical use. Most of the products were researched and developed during the 1980s and 1990s， so there was difference in quality standards for different products， and their quality control levels of some products were not perfect. At present， some of the products are approved as Chinese medicine， others are approved as chemical drugs， with a confusion in products name， management and clinical application. In this paper， the approval numbers， quality standards and clinical applications， and current problems of these products were summarized and compared; some suggestions were put forward， such as standardizing the product name， unifying the management of approval number category， and increasing the specific quality control attributes， in order to provide reference for standard implementation， quality control and drug regulation for fermented Cordyceps crude drugs and their preparations. Copyright© by the Chinese Pharmaceutical Association.

  16. Metrology: Measurement Assurance Program Guidelines

    NASA Technical Reports Server (NTRS)

    Eicke, W. G.; Riley, J. P.; Riley, K. J.

    1995-01-01

    The 5300.4 series of NASA Handbooks for Reliability and Quality Assurance Programs have provisions for the establishment and utilization of a documented metrology system to control measurement processes and to provide objective evidence of quality conformance. The intent of these provisions is to assure consistency and conformance to specifications and tolerances of equipment, systems, materials, and processes procured and/or used by NASA, its international partners, contractors, subcontractors, and suppliers. This Measurement Assurance Program (MAP) guideline has the specific objectives to: (1) ensure the quality of measurements made within NASA programs; (2) establish realistic measurement process uncertainties; (3) maintain continuous control over the measurement processes; and (4) ensure measurement compatibility among NASA facilities. The publication addresses MAP methods as applied within and among NASA installations and serves as a guide to: control measurement processes at the local level (one facility); conduct measurement assurance programs in which a number of field installations are joint participants; and conduct measurement integrity (round robin) experiments in which a number of field installations participate to assess the overall quality of particular measurement processes at a point in time.

  17. 49 CFR 179.7 - Quality assurance program.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... means to detect any nonconformity in the manufacturing, repair, inspection, testing, and qualification... quality control personnel. (3) Procedures to ensure that the latest applicable drawings, design calculations, specifications, and instructions are used in manufacture, inspection, testing, and repair. (4...

  18. The quest for performance-related specifications for hydraulic cement concrete.

    DOT National Transportation Integrated Search

    1982-01-01

    This paper reviews some of the problems associated with quality assurance for hydraulic cement concrete and the difficulties of relating the results of quality control and acceptance testing to the performance of the concrete facility. The importance...

  19. Using the scanning electron microscope on the production line to assure quality semiconductors

    NASA Technical Reports Server (NTRS)

    Adolphsen, J. W.; Anstead, R. J.

    1972-01-01

    The use of the scanning electron microscope to detect metallization defects introduced during batch processing of semiconductor devices is discussed. A method of determining metallization integrity was developed which culminates in a procurement specification using the scanning microscope on the production line as a quality control tool. Batch process control of the metallization operation is monitored early in the manufacturing cycle.

  20. Quality Control Analysis of Selected Aspects of Programs Administered by the Bureau of Student Financial Assistance. Task 1 and Quality Control Sample; Error-Prone Modeling Analysis Plan.

    ERIC Educational Resources Information Center

    Saavedra, Pedro; And Others

    Parameters and procedures for developing an error-prone model (EPM) to predict financial aid applicants who are likely to misreport on Basic Educational Opportunity Grant (BEOG) applications are introduced. Specifications to adapt these general parameters to secondary data analysis of the Validation, Edits, and Applications Processing Systems…

  1. The Development of a Technical Conceptual Structure for the Concepts Possessed by Selected Quality Control Specialists. Report of a Research Project.

    ERIC Educational Resources Information Center

    Nee, John G.

    This project had as its specific objective the development and field testing of a procedure for identifying the structure of technical concepts possessed by a group of selected quality control specialists. The associative theory of verbal behavior served as the rationale by which conceptual structures depicted by graphical maps of technical…

  2. Quality of life related to swallowing in Parkinson's disease.

    PubMed

    Carneiro, Danielle; das Graças Wanderley de Sales Coriolano, Maria; Belo, Luciana Rodrigues; de Marcos Rabelo, Aneide Rocha; Asano, Amdore Guescel; Lins, Otávio Gomes

    2014-10-01

    Swallowing difficulties in Parkinson's disease can result in decreased quality of life. The swallowing quality of life questionnaire (SWAL-QOL) is an instrument for specifically assessing quality of life with respect to swallowing, which has been little explored in patients with Parkinson's disease (PD). The goal of this study was to evaluate the quality of life with respect to swallowing in persons with PD compared to controls and at several stages of the disease using the SWAL-QOL. The experimental group was composed of 62 persons with PD at stages 1-4. Forty-one age-matched healthy subjects constituted the control group. The SWAL-QOL scores were significantly lower for the patients with PD than for the controls in all SWAL-QOL domains. Eating duration had the largest difference in score between persons with PD and the controls and the lowest mean score, followed by communication, fatigue, fear, sleep, and food selection. The scores of most domains were lower at later stages of the disease. The scores for eating duration, symptom frequency, and sleep were significantly lower at stage 4 than stages 1 and 2. In conclusion, patients with PD have significantly lower scores in all domains of the SWAL-QOL than normal controls. This means swallowing difficulties occurring in patients with PD negatively affect their QOL. Progression of the disease worsens swallowing QOL, more specifically in the domains of eating duration, symptom frequency, and sleep. This occurs mostly at later stages of the disease.

  3. Feasibility study of using statistical process control to customized quality assurance in proton therapy.

    PubMed

    Rah, Jeong-Eun; Shin, Dongho; Oh, Do Hoon; Kim, Tae Hyun; Kim, Gwe-Ya

    2014-09-01

    To evaluate and improve the reliability of proton quality assurance (QA) processes and, to provide an optimal customized tolerance level using the statistical process control (SPC) methodology. The authors investigated the consistency check of dose per monitor unit (D/MU) and range in proton beams to see whether it was within the tolerance level of the daily QA process. This study analyzed the difference between the measured and calculated ranges along the central axis to improve the patient-specific QA process in proton beams by using process capability indices. The authors established a customized tolerance level of ±2% for D/MU and ±0.5 mm for beam range in the daily proton QA process. In the authors' analysis of the process capability indices, the patient-specific range measurements were capable of a specification limit of ±2% in clinical plans. SPC methodology is a useful tool for customizing the optimal QA tolerance levels and improving the quality of proton machine maintenance, treatment delivery, and ultimately patient safety.

  4. Quality control in molecular immunohistochemistry

    PubMed Central

    2008-01-01

    Immunoperoxidase histochemistry is a widespread method of assessing expression of biomolecules in tissue samples. Accurate assessment of the expression levels of genes is critical for the management of disease, particularly as therapy targeted to specific molecules becomes more widespread. Determining the quality of preservation of macromolecules in tissue is important to avoid false negative and false positive results. In this review we discuss (1) issues of sensitivity (false negativity) and specificity (false positivity) of immunohistochemical stains, (2) approaches to better understanding differences in immunostains done by different laboratories (including the recently proposed MISFISHIE specification for tissue localization studies), and (3) approaches to assessing the quality of preservation of macromolecules in tissue, particularly in small biopsy samples. PMID:18648842

  5. Importance of good manufacturing practices in microbiological monitoring in processing human tissues for transplant.

    PubMed

    Pianigiani, Elisa; Ierardi, Francesca; Fimiani, Michele

    2013-12-01

    Skin allografts represent an important therapeutic resource in the treatment of severe skin loss. The risk associated with application of processed tissues in humans is very low, however, human material always carries the risk of disease transmission. To minimise the risk of contamination of grafts, processing is carried out in clean rooms where air quality is monitored. Procedures and quality control tests are performed to standardise the production process and to guarantee the final product for human use. Since we only validate and distribute aseptic tissues, we conducted a study to determine what type of quality controls for skin processing are the most suitable for detecting processing errors and intercurrent contamination, and for faithfully mapping the process without unduly increasing production costs. Two different methods for quality control were statistically compared using the Fisher exact test. On the basis of the current study we selected our quality control procedure based on pre- and post-processing tissue controls, operator and environmental controls. Evaluation of the predictability of our control methods showed that tissue control was the most reliable method of revealing microbial contamination of grafts. We obtained 100 % sensitivity by doubling tissue controls, while maintaining high specificity (77 %).

  6. 10 CFR 32.110 - Acceptance sampling procedures under certain specific licenses.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Acceptance sampling procedures under certain specific licenses. 32.110 Section 32.110 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Quality Control Sampling Procedures § 32...

  7. 10 CFR 32.110 - Acceptance sampling procedures under certain specific licenses.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Acceptance sampling procedures under certain specific licenses. 32.110 Section 32.110 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL Quality Control Sampling Procedures § 32...

  8. Optimal quality control of bakers' yeast fed-batch culture using population dynamics.

    PubMed

    Dairaku, K; Izumoto, E; Morikawa, H; Shioya, S; Takamatsu, T

    1982-12-01

    An optimal quality control policy for the overall specific growth rate of bakers' yeast, which maximizes the fermentative activity in the making of bread, was obtained by direct searching based on the mathematical model proposed previously. The mathematical model had described the age distribution of bakers' yeast which had an essential relationship to the ability of fermentation in the making of bread. The mathematical model is a simple aging model with two periods: Nonbudding and budding. Based on the result obtained by direct searching, the quality control of bakers' yeast fed-batch culture was performed and confirmed to be experimentally valid.

  9. Development of a Premium Quality Plasma-derived IVIg (IQYMUNE®) Utilizing the Principles of Quality by Design-A Worked-through Case Study.

    PubMed

    Paolantonacci, Philippe; Appourchaux, Philippe; Claudel, Béatrice; Ollivier, Monique; Dennett, Richard; Siret, Laurent

    2018-01-01

    Polyvalent human normal immunoglobulins for intravenous use (IVIg), indicated for rare and often severe diseases, are complex plasma-derived protein preparations. A quality by design approach has been used to develop the Laboratoire Français du Fractionnement et des Biotechnologies new-generation IVIg, targeting a high level of purity to generate an enhanced safety profile while maintaining a high level of efficacy. A modular approach of quality by design was implemented consisting of five consecutive steps to cover all the stages from the product design to the final product control strategy.A well-defined target product profile was translated into 27 product quality attributes that formed the basis of the process design. In parallel, a product risk analysis was conducted and identified 19 critical quality attributes among the product quality attributes. Process risk analysis was carried out to establish the links between process parameters and critical quality attributes. Twelve critical steps were identified, and for each of these steps a risk mitigation plan was established.Among the different process risk mitigation exercises, five process robustness studies were conducted at qualified small scale with a design of experiment approach. For each process step, critical process parameters were identified and, for each critical process parameter, proven acceptable ranges were established. The quality risk management and risk mitigation outputs, including verification of proven acceptable ranges, were used to design the process verification exercise at industrial scale.Finally, the control strategy was established using a mix, or hybrid, of the traditional approach plus elements of the quality by design enhanced approach, as illustrated, to more robustly assign material and process controls and in order to securely meet product specifications.The advantages of this quality by design approach were improved process knowledge for industrial design and process validation and a clear justification of the process and product specifications as a basis for control strategy and future comparability exercises. © PDA, Inc. 2018.

  10. Quality control of murine monoclonal antibodies using isoelectric focusing affinity immunoblot analysis

    NASA Technical Reports Server (NTRS)

    Hamilton, Robert G.; Rodkey, L. Scott; Reimer, Charles B.

    1987-01-01

    The quality control of murine hybridoma secretory products has been performed using two approaches for isoelectric focusing affinity immunoblot analysis: (1) a method in which antigen-coated nitrocellulose is placed on top of an acrylamide gel containing isoelectrically focused ascites to bind the antigen specific monoclonal antibody; and (2) a method in which focused ascite proteins were passively blotted onto nitrocellulose and specific monoclonal antibodies were detected with enzyme-conjugated antigen. Analysis by both methods of batches of ascites containing antihuman IgG antibodies that were produced by six hybridomas permitted effective monitoring of immunoreactive antibodies for pI microheterogeneity.

  11. A quality improvement project to improve the Medicare and Medicaid Services (CMS) sepsis bundle compliance rate in a large healthcare system.

    PubMed

    Raschke, Robert A; Groves, Robert H; Khurana, Hargobind S; Nikhanj, Nidhi; Utter, Ethel; Hartling, Didi; Stoffer, Brenda; Nunn, Kristina; Tryon, Shona; Bruner, Michelle; Calleja, Maria; Curry, Steven C

    2017-01-01

    Sepsis is a leading cause of mortality and morbidity in hospitalised patients. The Centers for Medicare and Medicaid Services (CMS) mandated that US hospitals report sepsis bundle compliance rate as a quality process measure in October 2015. The specific aim of our study was to improve the CMS sepsis bundle compliance rate from 30% to 40% across 20 acute care hospitals in our healthcare system within 1 year. The study included all adult inpatients with sepsis sampled according to CMS specifications from October 2015 to September 2016. The CMS sepsis bundle compliance rate was tracked monthly using statistical process control charting. A baseline rate of 28.5% with 99% control limits was established. We implemented multiple interventions including computerised decision support systems (CDSSs) to increase compliance with the most commonly missing bundle elements. Compliance reached 42% (99% statistical process control limits 18.4%-38.6%) as CDSS was implemented system-wide, but this improvement was not sustained after CMS changed specifications of the outcome measure. Difficulties encountered elucidate shortcomings of our study methodology and of the CMS sepsis bundle compliance rate as a quality process measure.

  12. Plan delivery quality assurance for CyberKnife: Statistical process control analysis of 350 film-based patient-specific QAs.

    PubMed

    Bellec, J; Delaby, N; Jouyaux, F; Perdrieux, M; Bouvier, J; Sorel, S; Henry, O; Lafond, C

    2017-07-01

    Robotic radiosurgery requires plan delivery quality assurance (DQA) but there has never been a published comprehensive analysis of a patient-specific DQA process in a clinic. We proposed to evaluate 350 consecutive film-based patient-specific DQAs using statistical process control. We evaluated the performance of the process to propose achievable tolerance criteria for DQA validation and we sought to identify suboptimal DQA using control charts. DQAs were performed on a CyberKnife-M6 using Gafchromic-EBT3 films. The signal-to-dose conversion was performed using a multichannel-correction and a scanning protocol that combined measurement and calibration in a single scan. The DQA analysis comprised a gamma-index analysis at 3%/1.5mm and a separate evaluation of spatial and dosimetric accuracy of the plan delivery. Each parameter was plotted on a control chart and control limits were calculated. A capability index (Cpm) was calculated to evaluate the ability of the process to produce results within specifications. The analysis of capability showed that a gamma pass rate of 85% at 3%/1.5mm was highly achievable as acceptance criteria for DQA validation using a film-based protocol (Cpm>1.33). 3.4% of DQA were outside a control limit of 88% for gamma pass-rate. The analysis of the out-of-control DQA helped identify a dosimetric error in our institute for a specific treatment type. We have defined initial tolerance criteria for DQA validations. We have shown that the implementation of a film-based patient-specific DQA protocol with the use of control charts is an effective method to improve patient treatment safety on CyberKnife. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  13. Implementation of basic quality control tests for malaria medicines in Amazon Basin countries: results for the 2005–2010 period

    PubMed Central

    2012-01-01

    Background Ensuring the quality of malaria medicines is crucial in working toward malaria control and eventual elimination. Unlike other validated tests that can assess all critical quality attributes, which is the standard for determining the quality of medicines, basic tests are significantly less expensive, faster, and require less skilled labour; yet, these tests provide reproducible data and information on several critical quality attributes, such as identity, purity, content, and disintegration. Visual and physical inspection also provides valuable information about the manufacturing and the labelling of medicines, and in many cases this inspection is sufficient to detect counterfeit medicines. The Promoting the Quality of Medicines (PQM) programme has provided technical assistance to Amazon Malaria Initiative (AMI) countries to implement the use of basic tests as a key screening mechanism to assess the quality of malaria medicines available to patients in decentralized regions. Methods Trained personnel from the National Malaria Control Programmes (NMCPs), often in collaboration with country’s Official Medicine Control Laboratory (OMCL), developed country- specific protocols that encompassed sampling methods, sample analysis, and data reporting. Sampling sites were selected based on malaria burden, accessibility, and geographical location. Convenience sampling was performed and countries were recommended to store the sampled medicines under conditions that did not compromise their quality. Basic analytical tests, such as disintegration and thin layer chromatography (TLC), were performed utilizing a portable mini-laboratory. Results Results were originally presented at regional meetings in a non-standardized format that lacked relevant medicines information. However, since 2008 information has been submitted utilizing a template specifically developed by PQM for that purpose. From 2005 to 2010, the quality of 1,663 malaria medicines from seven AMI countries was evaluated, mostly collected from the public sector, 1,445/1,663 (86.9%). Results indicate that 193/1,663 (11.6%) were found not to meet quality specifications. Most failures were reported during visual and physical inspection, 142/1663 (8.5%), and most of these were due to expired medicines, 118/142 (83.1%). Samples failing TLC accounted for 27/1,663 (1.6%) and those failing disintegration accounted for 24/1,663 (1.4%). Medicines quality failures decreased significantly during the last two years. Conclusions Basic tests revealed that the quality of medicines in the public sector improved over the years, since the implementation of this type of quality monitoring programme in 2005. However, the lack of consistent confirmatory tests in the quality control (QC) laboratory, utilizing methods that can also evaluate additional quality attributes, could still mask quality issues. In the future, AMI countries should improve coordination with their health authorities and their QC lab consistently, to provide a more complete picture of malaria medicines quality and support the implementation of corrective actions. Facilities in the private and informal sectors also should be included when these sectors constitute an important source of medicines used by malaria patients. PMID:22704680

  14. Implementation of basic quality control tests for malaria medicines in Amazon Basin countries: results for the 2005-2010 period.

    PubMed

    Pribluda, Victor S; Barojas, Adrian; Añez, Arletta; López, Cecilia G; Figueroa, Ruth; Herrera, Roxana; Nakao, Gladys; Nogueira, Fernando Ha; Pianetti, Gerson A; Povoa, Marinete M; Viana, Giselle Mr; Gomes, Margarete S Mendonça; Escobar, Jose P; Sierra, Olga L Muñoz; Norena, Susana P Rendon; Veloz, Raúl; Bravo, Marcy Silva; Aldás, Martha R; Hindssemple, Alison; Collins, Marilyn; Ceron, Nicolas; Krishnalall, Karanchand; Adhin, Malti; Bretas, Gustavo; Hernandez, Nelly; Mendoza, Marjorie; Smine, Abdelkrim; Chibwe, Kennedy; Lukulay, Patrick; Evans, Lawrence

    2012-06-15

    Ensuring the quality of malaria medicines is crucial in working toward malaria control and eventual elimination. Unlike other validated tests that can assess all critical quality attributes, which is the standard for determining the quality of medicines, basic tests are significantly less expensive, faster, and require less skilled labour; yet, these tests provide reproducible data and information on several critical quality attributes, such as identity, purity, content, and disintegration. Visual and physical inspection also provides valuable information about the manufacturing and the labelling of medicines, and in many cases this inspection is sufficient to detect counterfeit medicines. The Promoting the Quality of Medicines (PQM) programme has provided technical assistance to Amazon Malaria Initiative (AMI) countries to implement the use of basic tests as a key screening mechanism to assess the quality of malaria medicines available to patients in decentralized regions. Trained personnel from the National Malaria Control Programmes (NMCPs), often in collaboration with country's Official Medicine Control Laboratory (OMCL), developed country- specific protocols that encompassed sampling methods, sample analysis, and data reporting. Sampling sites were selected based on malaria burden, accessibility, and geographical location. Convenience sampling was performed and countries were recommended to store the sampled medicines under conditions that did not compromise their quality. Basic analytical tests, such as disintegration and thin layer chromatography (TLC), were performed utilizing a portable mini-laboratory. Results were originally presented at regional meetings in a non-standardized format that lacked relevant medicines information. However, since 2008 information has been submitted utilizing a template specifically developed by PQM for that purpose. From 2005 to 2010, the quality of 1,663 malaria medicines from seven AMI countries was evaluated, mostly collected from the public sector, 1,445/1,663 (86.9%). Results indicate that 193/1,663 (11.6%) were found not to meet quality specifications. Most failures were reported during visual and physical inspection, 142/1663 (8.5%), and most of these were due to expired medicines, 118/142 (83.1%). Samples failing TLC accounted for 27/1,663 (1.6%) and those failing disintegration accounted for 24/1,663 (1.4%). Medicines quality failures decreased significantly during the last two years. Basic tests revealed that the quality of medicines in the public sector improved over the years, since the implementation of this type of quality monitoring programme in 2005. However, the lack of consistent confirmatory tests in the quality control (QC) laboratory, utilizing methods that can also evaluate additional quality attributes, could still mask quality issues. In the future, AMI countries should improve coordination with their health authorities and their QC lab consistently, to provide a more complete picture of malaria medicines quality and support the implementation of corrective actions. Facilities in the private and informal sectors also should be included when these sectors constitute an important source of medicines used by malaria patients.

  15. Local Quality Work in an Age of Accountability--Between Autonomy and Control

    ERIC Educational Resources Information Center

    Bergh, Andreas

    2015-01-01

    This article analyses a specific part of the actions taken to improve the quality of Swedish education, namely the expectations formulated in national policy documents for the quality work that local authorities, schools and teachers are supposed to undertake. For the empirical analysis of how these expectations have changed over the last two…

  16. Quality Dashboards: Technical and Architectural Considerations of an Actionable Reporting Tool for Population Management

    PubMed Central

    Olsha-Yehiav, Maya; Einbinder, Jonathan S.; Jung, Eunice; Linder, Jeffrey A.; Greim, Julie; Li, Qi; Schnipper, Jeffrey L.; Middleton, Blackford

    2006-01-01

    Quality Dashboards (QD) is a condition-specific, actionable web-based application for quality reporting and population management that is integrated into the Electronic Health Record (EHR). Using server-based graphic web controls in a .Net environment to construct Quality Dashboards allows customization of the reporting tool without the need to rely on commercial business intelligence tool. Quality Dashboards will improve patient care and quality outcomes as clinicians utilize the reporting tool for population management. PMID:17238671

  17. 222-S Laboratory Quality Assurance Plan. Revision 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Meznarich, H.K.

    1995-07-31

    This Quality Assurance Plan provides,quality assurance (QA) guidance, regulatory QA requirements (e.g., 10 CFR 830.120), and quality control (QC) specifications for analytical service. This document follows the U.S Department of Energy (DOE) issued Hanford Analytical Services Quality Assurance Plan (HASQAP). In addition, this document meets the objectives of the Quality Assurance Program provided in the WHC-CM-4-2, Section 2.1. Quality assurance elements required in the Guidelines and Specifications for Preparing Quality Assurance Program Plans (QAMS-004) and Interim Guidelines and Specifications for Preparing Quality Assurance Project Plans (QAMS-005) from the US Environmental Protection Agency (EPA) are covered throughout this document. A qualitymore » assurance index is provided in the Appendix A. This document also provides and/or identifies the procedural information that governs laboratory operations. The personnel of the 222-S Laboratory and the Standards Laboratory including managers, analysts, QA/QC staff, auditors, and support staff shall use this document as guidance and instructions for their operational and quality assurance activities. Other organizations that conduct activities described in this document for the 222-S Laboratory shall follow this QA/QC document.« less

  18. Develop nondestructive rapid pavement quality assurance/quality control evaluation test methods and supporting technology : project summary.

    DOT National Transportation Integrated Search

    2017-01-01

    The findings from the proof of concept with mechanics-based models for flexible base suggest additional validation work should be performed, draft construction specification frameworks should be developed, and work extending the technology to stabili...

  19. Develop nondestructive rapid pavement quality Assurance/quality control evaluation test methods and supporting technology : project summary.

    DOT National Transportation Integrated Search

    2017-01-01

    The findings from the proof of concept with mechanics-based models for flexible base suggest additional validation work should be performed, draft construction specification frameworks should be developed, and work extending the technology to stabili...

  20. Profile of a cell test database and a corresponding reliability database

    NASA Technical Reports Server (NTRS)

    Brearley, George R.; Klein, Glenn C.

    1992-01-01

    The development of computerized control, and data retrieval for aerospace cell testing affords an excellent opportunity to incorporate three specific concepts to both manage the test area and to track product performance on a real-time basis. The adoption and incorporation of precepts fostered by this total quality management (TQM) initiative are critical to us for retaining control of our business while substantially reducing the separate quality control inspection activity. Test discrepancies are all 'equally bad' in cell acceptance testing because, for example, we presently do not discriminate between 1 or 25 mV for an overvoltage condition. We must take leadership in classifying such discrepancies in order to expedite their clearance and redirect our resources for prevention activities. The development and use of engineering alerts (or guardbanding) which more closely match our product capabilities and are toleranced tighter than the required customer specification are paramount to managing the test unit in order to remain both quality and cost effective.

  1. Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 4: PEP functional specification

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The functional, performance, design, and test requirements for the Orbiter power extension package and its associated ground support equipment are defined. Both government and nongovernment standards and specifications are cited for the following subsystems: electrical power, structural/mechanical, avionics, and thermal control. Quality control assurance provisions and preparation for delivery are also discussed.

  2. Monitoring Processes in Visual Search Enhanced by Professional Experience: The Case of Orange Quality-Control Workers

    PubMed Central

    Visalli, Antonino; Vallesi, Antonino

    2018-01-01

    Visual search tasks have often been used to investigate how cognitive processes change with expertise. Several studies have shown visual experts' advantages in detecting objects related to their expertise. Here, we tried to extend these findings by investigating whether professional search experience could boost top-down monitoring processes involved in visual search, independently of advantages specific to objects of expertise. To this aim, we recruited a group of quality-control workers employed in citrus farms. Given the specific features of this type of job, we expected that the extensive employment of monitoring mechanisms during orange selection could enhance these mechanisms even in search situations in which orange-related expertise is not suitable. To test this hypothesis, we compared performance of our experimental group and of a well-matched control group on a computerized visual search task. In one block the target was an orange (expertise target) while in the other block the target was a Smurfette doll (neutral target). The a priori hypothesis was to find an advantage for quality-controllers in those situations in which monitoring was especially involved, that is, when deciding the presence/absence of the target required a more extensive inspection of the search array. Results were consistent with our hypothesis. Quality-controllers were faster in those conditions that extensively required monitoring processes, specifically, the Smurfette-present and both target-absent conditions. No differences emerged in the orange-present condition, which resulted to mainly rely on bottom-up processes. These results suggest that top-down processes in visual search can be enhanced through immersive real-life experience beyond visual expertise advantages. PMID:29497392

  3. Markers of Bone Health, Bone-Specific Physical Activities, Nutritional Intake, and Quality of Life of Professional Jockeys in Hong Kong.

    PubMed

    Poon, Eric Tsz-Chun; O'Reilly, John; Sheridan, Sinead; Cai, Michelle Mingjing; Wong, Stephen Heung-Sang

    2018-04-28

    Weight-making practices, regularly engaged in by horse racing jockeys, have been suggested to impair both physiological and mental health. This study aimed to assess bone health markers, nutritional intake, bone-specific physical activity (PA) habits, and quality of life of professional jockeys in Hong Kong (n = 14), with gender-, age-, and body mass index-matched controls (n = 14). Anthropometric measurements, serum hormonal biomarkers, bone mineral density, bone-specific PA habits, nutritional intake, and quality of life were assessed in all participants. The jockey group displayed significantly lower bone mineral density at both calcanei than the control group (left: 0.50 ± 0.06 vs. 0.63 ± 0.07 g/cm 2 ; right: 0.51 ± 0.07 vs. 0.64 ± 0.10 g/cm 2 , both ps < .01). Thirteen of the 14 jockeys (93%) showed either osteopenia or osteoporosis in at least one of their calcanei. No significant difference in bone mineral density was detected for either forearm between the groups. The current bone-specific PA questionnaire score was lower in the jockey group than the control group (5.61 ± 1.82 vs. 8.27 ± 2.91, p < .05). Daily energy intake was lower in the jockeys than the controls (1,360 ± 515 vs. 1,985 ± 1,046 kcal/day, p < .01). No significant group difference was found for micronutrient intake assessed by the bone-specific food frequency questionnaire, blood hormonal markers, and quality of life scores. Our results revealed suboptimal bone conditions at calcanei and insufficient energy intake and bone-loading PAs among professional jockeys in Hong Kong compared with healthy age-, gender-, and body mass index-matched controls. Further research is warranted to examine the effect of improved bone-loading PAs and nutritional habits on the musculoskeletal health of professional jockeys.

  4. Double shell tanks (DST) chemistry control data quality objectives

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    BANNING, D.L.

    2001-10-09

    One of the main functions of the River Protection Project is to store the Hanford Site tank waste until the Waste Treatment Plant (WTP) is ready to receive and process the waste. Waste from the older single-shell tanks is being transferred to the newer double-shell tanks (DSTs). Therefore, the integrity of the DSTs must be maintained until the waste from all tanks has been retrieved and transferred to the WTP. To help maintain the integrity of the DSTs over the life of the project, specific chemistry limits have been established to control corrosion of the DSTs. These waste chemistry limitsmore » are presented in the Technical Safety Requirements (TSR) document HNF-SD-WM-TSR-006, Sec. 5 . IS, Rev 2B (CHG 200 I). In order to control the chemistry in the DSTs, the Chemistry Control Program will require analyses of the tank waste. This document describes the Data Quality Objective (DUO) process undertaken to ensure appropriate data will be collected to control the waste chemistry in the DSTs. The DQO process was implemented in accordance with Data Quality Objectives for Sampling and Analyses, HNF-IP-0842, Rev. Ib, Vol. IV, Section 4.16, (Banning 2001) and the U.S. Environmental Protection Agency EPA QA/G4, Guidance for the Data Quality Objectives Process (EPA 1994), with some modifications to accommodate project or tank specific requirements and constraints.« less

  5. An Overview of Controls and Flying Qualities Technology on the F/A-18 High Alpha Research Vehicle

    NASA Technical Reports Server (NTRS)

    Pahle, Joseph W.; Wichman, Keith D.; Foster, John V.; Bundick, W. Thomas

    1996-01-01

    The NASA F/A-18 High Alpha Research Vehicle (HARV) has been the flight test bed of a focused technology effort to significantly increase maneuvering capability at high angles of attack. Development and flight test of control law design methodologies, handling qualities metrics, performance guidelines, and flight evaluation maneuvers are described. The HARV has been modified to include two research control effectors, thrust vectoring, and actuated forebody strakes in order to provide increased control power at high angles of attack. A research flight control system has been used to provide a flexible, easily modified capability for high-angle-of-attack research controls. Different control law design techniques have been implemented and flight-tested, including eigenstructure assignment, variable gain output feedback, pseudo controls, and model-following. Extensive piloted simulation has been used to develop nonlinear performance guide-lines and handling qualities criteria for high angles of attack. This paper reviews the development and evaluation of technologies useful for high-angle-of-attack control. Design, development, and flight test of the research flight control system, control laws, flying qualities specifications, and flight test maneuvers are described. Flight test results are used to illustrate some of the lessons learned during flight test and handling qualities evaluations.

  6. Effects of a hospital-based education programme on self-care behaviour, care dependency and quality of life in patients with heart failure--a randomised controlled trial.

    PubMed

    Köberich, Stefan; Lohrmann, Christa; Mittag, Oskar; Dassen, Theo

    2015-06-01

    To evaluate the effects of a nurse-led, hospital-based heart failure specific education session with a three-month telephone follow-up on self-care behaviour, care dependency and quality of life for patients with chronic heart failure. Patient education in patients with heart failure is able to promote heart failure-specific self-care, to reduce mortality, morbidity and rehospitalisation rates and to enhance quality of life, especially if heart failure education is embedded in a multidisciplinary approach. Evidence of the effect of a nurse-led self-care education, quality of life and care dependency in addition to standard medical treatment in Germany is lacking. Nonblinded, prospective, single-centre, randomised controlled trial. Sixty-four patients were allocated either to the intervention group or to the control group. Patients in the intervention group received education about heart failure self-care with a consecutive telephone follow-up over three months in addition to standard medical treatment. Patients in the control group received standard medical treatment only. Data of 110 patients (58 in the intervention group and 52 in the control group) with a mean age of 62 years and mean left ventricular ejection fraction of 28·2% could be analysed. Self-care education had a significant influence on overall heart failure self-care but not on quality of life and care dependency. A single education session with a consecutive telephone follow-up is able to improve overall self-care behaviours but not quality of life. Care dependency was not influenced by the education session. The easy to implement and short educational intervention has a positive effect on self-care behaviour for patients with heart failure. However, there was no effect on quality of life and care dependency. To improve quality of life and to influence care dependency, different measures have to be applied. © 2015 John Wiley & Sons Ltd.

  7. Exploring factors influencing asthma control and asthma-specific health-related quality of life among children

    PubMed Central

    2013-01-01

    Background Little is known about factors contributing to children’s asthma control status and health-related quality of life (HRQoL). The study objectives were to assess the relationship between asthma control and asthma-specific HRQoL in asthmatic children, and to examine the extent to which parental health literacy, perceived self-efficacy with patient-physician interaction, and satisfaction with shared decision-making (SDM) contribute to children’s asthma control and asthma-specific HRQoL. Methods This cross-sectional study utilized data collected from a sample of asthmatic children (n = 160) aged 8–17 years and their parents (n = 160) who visited a university medical center. Asthma-specific HRQoL was self-reported by children using the National Institutes of Health’s Patient-Reported Outcomes Measurement Information System (PROMIS) Pediatric Asthma Impact Scale. Satisfaction with SDM, perceived self-efficacy with patient-physician interaction, parental health literacy, and asthma control were reported by parents using standardized measures. Structural equation modeling (SEM) was performed to test the hypothesized pathways. Results Path analysis revealed that children with better asthma control reported higher asthma-specific HRQoL (β = 0.4, P < 0.001). Parents with higher health literacy and greater perceived self-efficacy with patient-physician interactions were associated with higher satisfaction with SDM (β = 0.38, P < 0.05; β = 0.58, P < 0.001, respectively). Greater satisfaction with SDM was in turn associated with better asthma control (β = −0.26, P < 0.01). Conclusion Children’s asthma control status influenced their asthma-specific HRQoL. However, parental factors such as perceived self-efficacy with patient-physician interaction and satisfaction with shared decision-making indirectly influenced children’s asthma control status and asthma-specific HRQoL. PMID:23432913

  8. Performance specifications and six sigma theory: Clinical chemistry and industry compared.

    PubMed

    Oosterhuis, W P; Severens, M J M J

    2018-04-11

    Analytical performance specifications are crucial in test development and quality control. Although consensus has been reached on the use of biological variation to derive these specifications, no consensus has been reached which model should be preferred. The Six Sigma concept is widely applied in industry for quality specifications of products and can well be compared with Six Sigma models in clinical chemistry. However, the models for measurement specifications differ considerably between both fields: where the sigma metric is used in clinical chemistry, in industry the Number of Distinct Categories is used instead. In this study the models in both fields are compared and discussed. Copyright © 2018. Published by Elsevier Inc.

  9. Optimization-based controller design for rotorcraft

    NASA Technical Reports Server (NTRS)

    Tsing, N.-K.; Fan, M. K. H.; Barlow, J.; Tits, A. L.; Tischler, M. B.

    1993-01-01

    An optimization-based methodology for linear control system design is outlined by considering the design of a controller for a UH-60 rotorcraft in hover. A wide range of design specifications is taken into account: internal stability, decoupling between longitudinal and lateral motions, handling qualities, and rejection of windgusts. These specifications are investigated while taking into account physical limitations in the swashplate displacements and rates of displacement. The methodology crucially relies on user-machine interaction for tradeoff exploration.

  10. Asthma-specific health-related quality of life of people in Great Britain: A national survey.

    PubMed

    Upton, Jane; Lewis, Carine; Humphreys, Emily; Price, David; Walker, Samantha

    2016-11-01

    Although the ultimate goal of asthma treatment is to improve asthma-specific Health-Related Quality-Of-Life (HRQOL), in the UK population this is insufficiently studied. National asthma-specific HRQOL data is needed to inform strategies to address this condition. To benchmark asthma-specific HRQOL in a national survey of adults with asthma, and explore differences in this measure within subsections of the population. We analysed answers to the Marks Asthma Quality-of-Life Questionnaire (AQLQ-M) from a representative sample of 658 adults with asthma. Respondents answered asthma-specific questions to assess control, previous hospital admissions, asthma attacks and an indicator of severity. Higher scores indicate poorer HRQOL (maximum = 60). The highest quintile formed a subgroup 'Poor HRQOL'. Data were weighted to correct for any biases caused by differential non-response. Chi-square analyses were used to determine differences between good and poor quality of life and regression analyses performed to determine what factors are associated with poor HRQOL. The response rate was 49%. AQLQ-M median (IQR) scores were 5 (2-13) for the total sample (poor HRQOL = 21, good HRQOL = 3). Significant differences between good and poor HRQOL were observed in smoking status, SES, employment status and co-morbidities, but no differences were found between age groups. Those with poorly controlled asthma were significantly more likely to have poor HRQOL, ≥1 breathing related hospital admission or ≥1 asthma attack. This article provides benchmarking data on asthma-specific HRQOL. Improved strategies are needed to target interventions towards people experiencing poor HRQOL.

  11. Human Connectome Project Informatics: quality control, database services, and data visualization

    PubMed Central

    Marcus, Daniel S.; Harms, Michael P.; Snyder, Abraham Z.; Jenkinson, Mark; Wilson, J Anthony; Glasser, Matthew F.; Barch, Deanna M.; Archie, Kevin A.; Burgess, Gregory C.; Ramaratnam, Mohana; Hodge, Michael; Horton, William; Herrick, Rick; Olsen, Timothy; McKay, Michael; House, Matthew; Hileman, Michael; Reid, Erin; Harwell, John; Coalson, Timothy; Schindler, Jon; Elam, Jennifer S.; Curtiss, Sandra W.; Van Essen, David C.

    2013-01-01

    The Human Connectome Project (HCP) has developed protocols, standard operating and quality control procedures, and a suite of informatics tools to enable high throughput data collection, data sharing, automated data processing and analysis, and data mining and visualization. Quality control procedures include methods to maintain data collection consistency over time, to measure head motion, and to establish quantitative modality-specific overall quality assessments. Database services developed as customizations of the XNAT imaging informatics platform support both internal daily operations and open access data sharing. The Connectome Workbench visualization environment enables user interaction with HCP data and is increasingly integrated with the HCP's database services. Here we describe the current state of these procedures and tools and their application in the ongoing HCP study. PMID:23707591

  12. Helicopter mathematical models and control law development for handling qualities research

    NASA Technical Reports Server (NTRS)

    Chen, Robert T. N.; Lebacqz, J. Victor; Aiken, Edwin W.; Tischler, Mark B.

    1988-01-01

    Progress made in joint NASA/Army research concerning rotorcraft flight-dynamics modeling, design methodologies for rotorcraft flight-control laws, and rotorcraft parameter identification is reviewed. Research into these interactive disciplines is needed to develop the analytical tools necessary to conduct flying qualities investigations using both the ground-based and in-flight simulators, and to permit an efficient means of performing flight test evaluation of rotorcraft flying qualities for specification compliance. The need for the research is particularly acute for rotorcraft because of their mathematical complexity, high order dynamic characteristics, and demanding mission requirements. The research in rotorcraft flight-dynamics modeling is pursued along two general directions: generic nonlinear models and nonlinear models for specific rotorcraft. In addition, linear models are generated that extend their utilization from 1-g flight to high-g maneuvers and expand their frequency range of validity for the design analysis of high-gain flight control systems. A variety of methods ranging from classical frequency-domain approaches to modern time-domain control methodology that are used in the design of rotorcraft flight control laws is reviewed. Also reviewed is a study conducted to investigate the design details associated with high-gain, digital flight control systems for combat rotorcraft. Parameter identification techniques developed for rotorcraft applications are reviewed.

  13. The European general thoracic surgery database project.

    PubMed

    Falcoz, Pierre Emmanuel; Brunelli, Alessandro

    2014-05-01

    The European Society of Thoracic Surgeons (ESTS) Database is a free registry created by ESTS in 2001. The current online version was launched in 2007. It runs currently on a Dendrite platform with extensive data security and frequent backups. The main features are a specialty-specific, procedure-specific, prospectively maintained, periodically audited and web-based electronic database, designed for quality control and performance monitoring, which allows for the collection of all general thoracic procedures. Data collection is the "backbone" of the ESTS database. It includes many risk factors, processes of care and outcomes, which are specially designed for quality control and performance audit. The user can download and export their own data and use them for internal analyses and quality control audits. The ESTS database represents the gold standard of clinical data collection for European General Thoracic Surgery. Over the past years, the ESTS database has achieved many accomplishments. In particular, the database hit two major milestones: it now includes more than 235 participating centers and 70,000 surgical procedures. The ESTS database is a snapshot of surgical practice that aims at improving patient care. In other words, data capture should become integral to routine patient care, with the final objective of improving quality of care within Europe.

  14. Median of patient results as a tool for assessment of analytical stability.

    PubMed

    Jørgensen, Lars Mønster; Hansen, Steen Ingemann; Petersen, Per Hyltoft; Sölétormos, György

    2015-06-15

    In spite of the well-established external quality assessment and proficiency testing surveys of analytical quality performance in laboratory medicine, a simple tool to monitor the long-term analytical stability as a supplement to the internal control procedures is often needed. Patient data from daily internal control schemes was used for monthly appraisal of the analytical stability. This was accomplished by using the monthly medians of patient results to disclose deviations from analytical stability, and by comparing divergences with the quality specifications for allowable analytical bias based on biological variation. Seventy five percent of the twenty analytes achieved on two COBASs INTEGRA 800 instruments performed in accordance with the optimum and with the desirable specifications for bias. Patient results applied in analytical quality performance control procedures are the most reliable sources of material as they represent the genuine substance of the measurements and therefore circumvent the problems associated with non-commutable materials in external assessment. Patient medians in the monthly monitoring of analytical stability in laboratory medicine are an inexpensive, simple and reliable tool to monitor the steadiness of the analytical practice. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. The Exosome Associates Cotranscriptionally with the Nascent Pre-mRNP through Interactions with Heterogeneous Nuclear Ribonucleoproteins

    PubMed Central

    Hessle, Viktoria; Björk, Petra; Sokolowski, Marcus; de Valdivia, Ernesto González; Silverstein, Rebecca; Artemenko, Konstantin; Tyagi, Anu; Maddalo, Gianluca; Ilag, Leopold; Helbig, Roger; Zubarev, Roman A.

    2009-01-01

    Eukaryotic cells have evolved quality control mechanisms to degrade aberrant mRNA molecules and prevent the synthesis of defective proteins that could be deleterious for the cell. The exosome, a protein complex with ribonuclease activity, is a key player in quality control. An early quality checkpoint takes place cotranscriptionally but little is known about the molecular mechanisms by which the exosome is recruited to the transcribed genes. Here we study the core exosome subunit Rrp4 in two insect model systems, Chironomus and Drosophila. We show that a significant fraction of Rrp4 is associated with the nascent pre-mRNPs and that a specific mRNA-binding protein, Hrp59/hnRNP M, interacts in vivo with multiple exosome subunits. Depletion of Hrp59 by RNA interference reduces the levels of Rrp4 at transcription sites, which suggests that Hrp59 is needed for the exosome to stably interact with nascent pre-mRNPs. Our results lead to a revised mechanistic model for cotranscriptional quality control in which the exosome is constantly recruited to newly synthesized RNAs through direct interactions with specific hnRNP proteins. PMID:19494042

  16. A conceptual ground-water-quality monitoring network for San Fernando Valley, California

    USGS Publications Warehouse

    Setmire, J.G.

    1985-01-01

    A conceptual groundwater-quality monitoring network was developed for San Fernando Valley to provide the California State Water Resources Control Board with an integrated, basinwide control system to monitor the quality of groundwater. The geology, occurrence and movement of groundwater, land use, background water quality, and potential sources of pollution were described and then considered in designing the conceptual monitoring network. The network was designed to monitor major known and potential point and nonpoint sources of groundwater contamination over time. The network is composed of 291 sites where wells are needed to define the groundwater quality. The ideal network includes four specific-purpose networks to monitor (1) ambient water quality, (2) nonpoint sources of pollution, (3) point sources of pollution, and (4) line sources of pollution. (USGS)

  17. Evaluation of Louisiana's statistically based quality control and acceptance specifications for asphaltic concrete : final report.

    DOT National Transportation Integrated Search

    1998-09-01

    In 1971, the Louisiana Department of Transportation and Development initiated a statistically based specification system for asphaltic concrete using historically generated data. A Materials Test Data (MATT) reporting system was also started to archi...

  18. Impact of flying qualities on mission effectiveness for helicopter air combat

    NASA Technical Reports Server (NTRS)

    Harris, T. M.; Beerman, D. A.; Bivens, C. C.

    1984-01-01

    Battlefield nap-of-the-earth (NOE) helicopter operations are vital for a use of the helicopter in a high-threat environment. As the pilot's workload in this flight regime is very high, the helicopter's handling qualities become an important factor. The present investigation is concerned with overall mission effectiveness, flying qualities, and their interaction with other parameters. A description is presented of a study which generated a significant amount of date relating the importance of flying qualities to the ability to perform several specific mission tasks. It was found that flying qualities do have a major impact on the ability to perform a specific mission. The impact of flying qualities on Scout helicopter mission effectiveness is mainly related to the probability of being detected. The flying qualities effect most critical to the Scout mission was found to be precision of hover control.

  19. WHO Expert Committee on Specifications for Pharmaceutical Preparations.

    PubMed

    2005-01-01

    This report presents the recommendations of an international group of experts convened by the World Health Organization to consider matters concerning the quality assurance of pharmaceuticals and specifications for drug substances and dosage forms. Of particular relevance to drug regulatory authorities and pharmaceutical manufacturers, this report discusses the monographs on antiretrovirals proposed for inclusion in The International Pharmacopoeia and specifications for radiopharmaceuticals, quality specifications for antituberculosis drugs and the revision of the monograph on artemisinin derivatives, as well as quality control of reference materials, good manufacturing practices (GMP), inspection, distribution and trade and other aspects of quality assurance of pharmaceuticals, and regulatory issues. The report is complemented by a number of annexes, including an amendment to good manufacturing practices: main principles regarding the requirement for the sampling of starting materials, guidelines on good manufacturing practices regarding water for pharmaceutical use, guidelines on the sampling of pharmaceutical products and related materials and draft guidelines for registration of fixed-dose combination medicinal products.

  20. Development and implementation of an automated quantitative film digitizer quality control program

    NASA Astrophysics Data System (ADS)

    Fetterly, Kenneth A.; Avula, Ramesh T. V.; Hangiandreou, Nicholas J.

    1999-05-01

    A semi-automated, quantitative film digitizer quality control program that is based on the computer analysis of the image data from a single digitized test film was developed. This program includes measurements of the geometric accuracy, optical density performance, signal to noise ratio, and presampled modulation transfer function. The variability of the measurements was less than plus or minus 5%. Measurements were made on a group of two clinical and two laboratory laser film digitizers during a trial period of approximately four months. Quality control limits were established based on clinical necessity, vendor specifications and digitizer performance. During the trial period, one of the digitizers failed the performance requirements and was corrected by calibration.

  1. Nuclear Technology Series. Course 16: Mechanical Component Characteristics and Specifications.

    ERIC Educational Resources Information Center

    Center for Occupational Research and Development, Inc., Waco, TX.

    This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

  2. Grade Validity of Online Quantitative Courses

    ERIC Educational Resources Information Center

    Faurer, Judson C.

    2013-01-01

    Are prospective employers getting "quality" educated, degreed applicants and are academic institutions that offer online degree programs ensuring the quality control of the courses/programs offered? The issue specifically addressed in this paper is not with all institutions offering degrees through online programs or even with all online…

  3. Grade Validity of Online Quantitative Courses

    ERIC Educational Resources Information Center

    Faurer, Judson C.

    2009-01-01

    Are prospective employers getting "quality" educated degreed applicants and are academic institutions that offer online degree programs ensuring the quality control of the courses/programs offered? The issue specifically addressed in this paper is not with all institutions offering degrees through online programs or even with all online…

  4. Establishing a Quality Control System for Stem Cell-Based Medicinal Products in China

    PubMed Central

    2015-01-01

    Stem cell-based medicinal products (SCMPs) are emerging as novel therapeutic products. The success of its development depends on the existence of an effective quality control system, which is constituted by quality control technologies, standards, reference materials, guidelines, and the associated management system in accordance with regulatory requirements along product lifespan. However, a worldwide, effective quality control system specific for SCMPs is still far from established partially due to the limited understanding of stem cell sciences and lack of quality control technologies for accurately assessing the safety and biological effectiveness of SCMPs before clinical use. Even though, based on the existing regulations and current stem cell sciences and technologies, initial actions toward the goal of establishing such a system have been taken as exemplified by recent development of new “interim guidelines” for governing quality control along development of SCMPs and new development of the associated quality control technologies in China. In this review, we first briefly introduced the major institutions involved in the regulation of cell substrates and therapeutic cell products in China and the existing regulatory documents and technical guidelines used as critical references for developing the new interim guidelines. With focus only on nonhematopoietic stem cells, we then discussed the principal quality attributes of SCMPs as well as our thinking of proper testing approaches to be established with relevant evaluation technologies to ensure all quality requirements of SCMPs along different manufacturing processes and development stages. At the end, some regulatory and technical challenges were also discussed with the conclusion that combined efforts should be taken to promote stem cell regulatory sciences to establish the effective quality control system for SCMPs. PMID:25471126

  5. Benefits and Costs of Pulp and Paper Effluent Controls Under the Clean Water Act

    NASA Astrophysics Data System (ADS)

    Luken, Ralph A.; Johnson, F. Reed; Kibler, Virginia

    1992-03-01

    This study quantifies local improvements in environmental quality from controlling effluents in the pulp and paper industry. Although it is confined to a single industry, this study is the first effort to assess the actual net benefits of the Clean Water Act pollution control program. An assessment of water quality benefits requires linking regulatory policy, technical effects, and behavioral responses. Regulatory policies mandate specific controls that influence the quantity and nature of effluent discharges. We identify a subset of stream segments suitable for analysis, describe water quality simulations and control cost calculations under alternative regulatory scenarios, assign feasible water uses to each segment based on water quality, and determine probable upper bounds for the willingness of beneficiaries to pay. Because the act imposes uniform regulations that do not account for differences in compliance costs, existing stream quality, contributions of other effluent sources, and recreation potential, the relation between water quality benefits and costs varies widely across sites. This variation suggests that significant positive net benefits have probably been achieved in some cases, but we conclude that the costs of the Clean Water Act as a whole exceed likely benefits by a significant margin.

  6. Review of nuclear pharmacy practice in hospitals

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kawada, T.K.; Tubis, M.; Ebenkamp, T.

    1982-02-01

    An operational profile for nuclear pharmacy practice is presented, and the technical and professional role of nuclear pharmacists is reviewed. Key aspects of nuclear pharmacy practice in hospitals discussed are the basic facilities and equipment for the preparation, quality control, and distribution of radioactive drug products. Standards for receiving, storing, and processing radioactive material are described. The elements of a radiopharmaceutical quality assurance program, including the working procedures, documentation systems, data analysis, and specific control tests, are presented. Details of dose preparation and administration and systems of inventory control for radioactive products are outlined.

  7. Manufacturing Squares: An Integrative Statistical Process Control Exercise

    ERIC Educational Resources Information Center

    Coy, Steven P.

    2016-01-01

    In the exercise, students in a junior-level operations management class are asked to manufacture a simple product. Given product specifications, they must design a production process, create roles and design jobs for each team member, and develop a statistical process control plan that efficiently and effectively controls quality during…

  8. Quality of life and anxiety disorders: a population study.

    PubMed

    Cramer, Victoria; Torgersen, Svenn; Kringlen, Einar

    2005-03-01

    The study of quality of life has increased in importance in the area of mental disorders during the last decade. The aim of the present study was to investigate the effect of specific anxiety disorders on specific quality of life indicators in the common population. More than 2000 individuals between 18 and 65 years old were studied by means of structured interviews. The results showed that social phobia and panic disorder within the past year and lifetime, and generalized anxiety disorder within the past year, had an independent effect on quality of life when controlling for a number of sociodemographic variables, somatic health, and other DSM-III-R Axis I mental disorders. Specific phobias and obsessive compulsive disorder had only a small effect, and agoraphobia showed no effect. The effect was strongest for self-realization and contact with friends, but anxiety disorders also influenced subjective well-being, social support, negative life events, contact with family of origin, and neighborhood quality.

  9. Service quality in community pharmacy: an exploration of determinants.

    PubMed

    White, Lesley; Klinner, Christiane

    2012-01-01

    Although various instruments have been developed to measure customer satisfaction with community pharmacy services, there is limited research regarding pharmacy staffs' understanding of service quality and its determinants. This study aimed to explore the perceptions of pharmacy staff regarding the factors that constitute a high level of service quality using the service quality determinants proposed by the Conceptual Model of Service Quality. Structured interviews were conducted with 27 pharmacy assistants and 6 pharmacists in 3 community pharmacies in Sydney. The interview questions focused on the participants' perceptions of consumer expectations, the translation of these perceptions into service quality specifications, the actual service delivery, and the communication to customers. From the pharmacy staff perspective, service quality is significantly limited by insufficient internal communication and control processes that impede role clarity and the resolution of conflicting role expectations among customer service personnel. Participants indicated that these problems could be alleviated through the implementation of more transparent, realistic, measurable, and accepted quality specifications by pharmacy management. The study indicates that the extent to which pharmacy management sets, maintains, and communicates service quality specifications to staff directly affects role clarity, role conflict, and organizational commitment among customer service staff, which in turn directly influence the level of service quality provided to the customers. Copyright © 2012 Elsevier Inc. All rights reserved.

  10. Feasibility study of using statistical process control to customized quality assurance in proton therapy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rah, Jeong-Eun; Oh, Do Hoon; Shin, Dongho

    Purpose: To evaluate and improve the reliability of proton quality assurance (QA) processes and, to provide an optimal customized tolerance level using the statistical process control (SPC) methodology. Methods: The authors investigated the consistency check of dose per monitor unit (D/MU) and range in proton beams to see whether it was within the tolerance level of the daily QA process. This study analyzed the difference between the measured and calculated ranges along the central axis to improve the patient-specific QA process in proton beams by using process capability indices. Results: The authors established a customized tolerance level of ±2% formore » D/MU and ±0.5 mm for beam range in the daily proton QA process. In the authors’ analysis of the process capability indices, the patient-specific range measurements were capable of a specification limit of ±2% in clinical plans. Conclusions: SPC methodology is a useful tool for customizing the optimal QA tolerance levels and improving the quality of proton machine maintenance, treatment delivery, and ultimately patient safety.« less

  11. Cloud-enabled microscopy and droplet microfluidic platform for specific detection of Escherichia coli in water.

    PubMed

    Golberg, Alexander; Linshiz, Gregory; Kravets, Ilia; Stawski, Nina; Hillson, Nathan J; Yarmush, Martin L; Marks, Robert S; Konry, Tania

    2014-01-01

    We report an all-in-one platform - ScanDrop - for the rapid and specific capture, detection, and identification of bacteria in drinking water. The ScanDrop platform integrates droplet microfluidics, a portable imaging system, and cloud-based control software and data storage. The cloud-based control software and data storage enables robotic image acquisition, remote image processing, and rapid data sharing. These features form a "cloud" network for water quality monitoring. We have demonstrated the capability of ScanDrop to perform water quality monitoring via the detection of an indicator coliform bacterium, Escherichia coli, in drinking water contaminated with feces. Magnetic beads conjugated with antibodies to E. coli antigen were used to selectively capture and isolate specific bacteria from water samples. The bead-captured bacteria were co-encapsulated in pico-liter droplets with fluorescently-labeled anti-E. coli antibodies, and imaged with an automated custom designed fluorescence microscope. The entire water quality diagnostic process required 8 hours from sample collection to online-accessible results compared with 2-4 days for other currently available standard detection methods.

  12. Cloud-Enabled Microscopy and Droplet Microfluidic Platform for Specific Detection of Escherichia coli in Water

    PubMed Central

    Kravets, Ilia; Stawski, Nina; Hillson, Nathan J.; Yarmush, Martin L.; Marks, Robert S.; Konry, Tania

    2014-01-01

    We report an all-in-one platform – ScanDrop – for the rapid and specific capture, detection, and identification of bacteria in drinking water. The ScanDrop platform integrates droplet microfluidics, a portable imaging system, and cloud-based control software and data storage. The cloud-based control software and data storage enables robotic image acquisition, remote image processing, and rapid data sharing. These features form a “cloud” network for water quality monitoring. We have demonstrated the capability of ScanDrop to perform water quality monitoring via the detection of an indicator coliform bacterium, Escherichia coli, in drinking water contaminated with feces. Magnetic beads conjugated with antibodies to E. coli antigen were used to selectively capture and isolate specific bacteria from water samples. The bead-captured bacteria were co-encapsulated in pico-liter droplets with fluorescently-labeled anti-E. coli antibodies, and imaged with an automated custom designed fluorescence microscope. The entire water quality diagnostic process required 8 hours from sample collection to online-accessible results compared with 2–4 days for other currently available standard detection methods. PMID:24475107

  13. Incorporating Quality Control Information in the Sensor Web

    NASA Astrophysics Data System (ADS)

    Devaraju, Anusuriya; Kunkel, Ralf; Bogena, Heye

    2013-04-01

    The rapid development of sensing technologies had led to the creation of large amounts of heterogeneous environmental observations. The Sensor Web provides a wider access to sensors and observations via common protocols and specifications. Observations typically go through several levels of quality control, and aggregation before they are made available to end-users. Raw data are usually inspected, and related quality flags are assigned. Data are gap-filled, and errors are removed. New data series may also be derived from one or more corrected data sets. Until now, it is unclear how these kinds of information can be captured in the Sensor Web Enablement (SWE) framework. Apart from the quality measures (e.g., accuracy, precision, tolerance, or confidence), the levels of observational series, the changes applied, and the methods involved must be specified. It is important that this kind of quality control information is well described and communicated to end-users to allow for a better usage and interpretation of data products. In this paper, we describe how quality control information can be incorporated into the SWE framework. Concerning this, first, we introduce the TERENO (TERrestrial ENvironmental Observatories), an initiative funded by the large research infrastructure program of the Helmholtz Association in Germany. The main goal of the initiative is to facilitate the study of long-term effects of climate and land use changes. The TERENO Online Data RepOsitORry (TEODOOR) is a software infrastructure that supports acquisition, provision, and management of observations within TERENO via SWE specifications and several other OGC web services. Next, we specify changes made to the existing observational data model to incorporate quality control information. Here, we describe the underlying TERENO data policy in terms of provision and maintenance issues. We present data levels, and their implementation within TEODOOR. The data levels are adapted from those used by other similar systems such as CUAHSI, EarthScope and WMO. Finally, we outline recommendations for future work.

  14. 40 CFR 130.0 - Program summary and purpose.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... management decisions which are necessary to control specific sources of pollution. The plans recommend..., 205(j), non-construction management 205(g), 208, 303 and 305 of the Clean Water Act. The Water Quality... the chemical, physical and biological data needed to determine the present quality of a State's waters...

  15. A case study: application of statistical process control tool for determining process capability and sigma level.

    PubMed

    Chopra, Vikram; Bairagi, Mukesh; Trivedi, P; Nagar, Mona

    2012-01-01

    Statistical process control is the application of statistical methods to the measurement and analysis of variation process. Various regulatory authorities such as Validation Guidance for Industry (2011), International Conference on Harmonisation ICH Q10 (2009), the Health Canada guidelines (2009), Health Science Authority, Singapore: Guidance for Product Quality Review (2008), and International Organization for Standardization ISO-9000:2005 provide regulatory support for the application of statistical process control for better process control and understanding. In this study risk assessments, normal probability distributions, control charts, and capability charts are employed for selection of critical quality attributes, determination of normal probability distribution, statistical stability, and capability of production processes, respectively. The objective of this study is to determine tablet production process quality in the form of sigma process capability. By interpreting data and graph trends, forecasting of critical quality attributes, sigma process capability, and stability of process were studied. The overall study contributes to an assessment of process at the sigma level with respect to out-of-specification attributes produced. Finally, the study will point to an area where the application of quality improvement and quality risk assessment principles for achievement of six sigma-capable processes is possible. Statistical process control is the most advantageous tool for determination of the quality of any production process. This tool is new for the pharmaceutical tablet production process. In the case of pharmaceutical tablet production processes, the quality control parameters act as quality assessment parameters. Application of risk assessment provides selection of critical quality attributes among quality control parameters. Sequential application of normality distributions, control charts, and capability analyses provides a valid statistical process control study on process. Interpretation of such a study provides information about stability, process variability, changing of trends, and quantification of process ability against defective production. Comparative evaluation of critical quality attributes by Pareto charts provides the least capable and most variable process that is liable for improvement. Statistical process control thus proves to be an important tool for six sigma-capable process development and continuous quality improvement.

  16. Microbiological water methods: quality control measures for Federal Clean Water Act and Safe Drinking Water Act regulatory compliance.

    PubMed

    Root, Patsy; Hunt, Margo; Fjeld, Karla; Kundrat, Laurie

    2014-01-01

    Quality assurance (QA) and quality control (QC) data are required in order to have confidence in the results from analytical tests and the equipment used to produce those results. Some AOAC water methods include specific QA/QC procedures, frequencies, and acceptance criteria, but these are considered to be the minimum controls needed to perform a microbiological method successfully. Some regulatory programs, such as those at Code of Federal Regulations (CFR), Title 40, Part 136.7 for chemistry methods, require additional QA/QC measures beyond those listed in the method, which can also apply to microbiological methods. Essential QA/QC measures include sterility checks, reagent specificity and sensitivity checks, assessment of each analyst's capabilities, analysis of blind check samples, and evaluation of the presence of laboratory contamination and instrument calibration and checks. The details of these procedures, their performance frequency, and expected results are set out in this report as they apply to microbiological methods. The specific regulatory requirements of CFR Title 40 Part 136.7 for the Clean Water Act, the laboratory certification requirements of CFR Title 40 Part 141 for the Safe Drinking Water Act, and the International Organization for Standardization 17025 accreditation requirements under The NELAC Institute are also discussed.

  17. [Discussion on research thinking of traditional Chinese medicine standardization system based on whole process quality control].

    PubMed

    Dong, Ling; Sun, Yu; Pei, Wen-Xuan; Dai, Jun-Dong; Wang, Zi-Yu; Pan, Meng; Chen, Jiang-Peng; Wang, Yun

    2017-12-01

    The concept of "Quality by design" indicates that good design for the whole life cycle of pharmaceutical production enables the drug to meet the expected quality requirements. Aiming at the existing problems of the traditional Chinese medicine (TCM) industry, the TCM standardization system was put forward in this paper from the national strategic level, under the guidance by the idea of quality control in international manufacturing industry and with considerations of TCM industry's own characteristics and development status. The connotation of this strategy was to establish five interrelated systems: multi-indicators system based on tri-indicators system, quality standard and specification system of TCM herbal materials and decoction pieces, quality traceability system, data monitoring system based on whole-process quality control, and whole-process quality management system of TCM, and achieve the whole process systematic and scientific study in TCM industry through "top-level design-implement in steps-system integration" workflow. This article analyzed the correlation between the quality standards of all links, established standard operating procedures of each link and whole process, and constructed a high standard overall quality management system for TCM industry chains, in order to provide a demonstration for the establishment of TCM whole-process quality control system and provide systematic reference and basis for standardization strategy in TCM industry. Copyright© by the Chinese Pharmaceutical Association.

  18. Perceptions and misconceptions regarding the Joint Commission's view of quality monitoring.

    PubMed

    Patterson, C H

    1989-10-01

    The Joint Commission recently has revised its hospital standards for infection control to reflect more accurately current state-of-the-art practices. In addition, the Joint Commission's Agenda for Change initiatives include the development of clinical indicators; one of the topics that will be included in those clinical indicator sets will be infection control. How the hospital chooses to organize itself to conduct the historically required monitoring and evaluation of clinical patient care currently required by the standards of the Joint Commission is at the option of the hospital. How the hospital will organize and collect data specific to infection control indicators yet to be developed by the Joint Commission has not been determined and will not be defined until specific research and development projects are completed. The hospital is expected to have in place infection prevention, surveillance, and control programs; it also is expected to have in place a quality assurance program that focuses not only on solving identified problems but also on the improvement of patient care quality. How the hospitals organize and/or integrate these activities is also at its option. It is expected that qualified professionals will direct and enforce infection prevention, surveillance, and control practices; indicators for infection control can provide data that will help assess the relative success of those practices and activities. The Joint Commission is not developing the capability to judge, on its own part, the actual quality of care provided by an organization seeking accreditation. Rather, the Joint Commission is committed to developing more accurate means to evaluate the structures, processes, and outcomes of diagnosis and treatment activities, as well as their interrelationships. Clinical excellence is supported by quality in the organizational environment and the managerial and leadership contexts within which patient care is delivered. Both clinical and organizational excellence are essential components of quality, and the Joint Commission is convinced that it is appropriate and timely to undertake more direct assessments of both.

  19. Handling qualities effects of display latency

    NASA Technical Reports Server (NTRS)

    King, David W.

    1993-01-01

    Display latency is the time delay between aircraft response and the corresponding response of the cockpit displays. Currently, there is no explicit specification for allowable display lags to ensure acceptable aircraft handling qualities in instrument flight conditions. This paper examines the handling qualities effects of display latency between 70 and 400 milliseconds for precision instrument flight tasks of the V-22 Tiltrotor aircraft. Display delay effects on the pilot control loop are analytically predicted through a second order pilot crossover model of the V-22 lateral axis, and handling qualities trends are evaluated through a series of fixed-base piloted simulation tests. The results show that the effects of display latency for flight path tracking tasks are driven by the stability characteristics of the attitude control loop. The data indicate that the loss of control damping due to latency can be simply predicted from knowledge of the aircraft's stability margins, control system lags, and required control bandwidths. Based on the relationship between attitude control damping and handling qualities ratings, latency design guidelines are presented. In addition, this paper presents a design philosophy, supported by simulation data, for using flight director display augmentation to suppress the effects of display latency for delays up to 300 milliseconds.

  20. Improved quality control of [18F]fluoromethylcholine.

    PubMed

    Nader, Michael; Reindl, Dietmar; Eichinger, Reinhard; Beheshti, Mohsen; Langsteger, Werner

    2011-11-01

    With respect to the broad application of [(18)F-methyl]fluorocholine (FCH), there is a need for a safe, but also efficient and convenient way for routine quality control of FCH. Therefore, a GC- method should be developed and validated which allows the simultaneous quantitation of all chemical impurities and residual solvents such as acetonitrile, ethanol, dibromomethane and N,N-dimethylaminoethanol. Analytical GC has been performed with a GC-capillary column Optima 1701 (50 m×0.32 mm), and a pre-column deactivated capillary column phenyl-Sil (10 m×0.32) in line with a flame ionization detector (FID) was used. The validation includes the following tests: specificity, range, accuracy, linearity, precision, limit of detection (LOD) and limit of quantitation (LOQ) of all listed substances. The described GC method has been successfully used for the quantitation of the listed chemical impurities. The specificity of the GC separation has been proven by demonstrating that the appearing peaks are completely separated from each other and that a resolution R≥1.5 for the separation of the peaks could be achieved. The specified range confirmed that the analytical procedure provides an acceptable degree of linearity, accuracy and precision. For each substance, a range from 2% to 120% of the specification limit could be demonstrated. The corresponding LOD values were determined and were much lower than the specification limits. An efficient and convenient GC method for the quality control of FCH has been developed and validated which meets all acceptance criteria in terms of linearity, specificity, precision, accuracy, LOD and LOQ. Copyright © 2011 Elsevier Inc. All rights reserved.

  1. [Quality control of Maca (Lepidium meyenii)].

    PubMed

    Shu, Ji-cheng; Cui, Hang-qing; Huang, Ying-zheng; Huang, Xiao-ying; Yang, Ming

    2015-12-01

    To control the quality of Maca, the quality standard was established in this study. According to the methods recorded in the Appendix of Chinese Pharmacopoeia (2010 Edition), the water, extract, total ash, acid insoluble substance, and heavy metals inspections in Lepidium meyenii were carried out. N-benzyl-9Z, 12Z-octadecadienamide in L. meyenii was identified by TLC, and it was determined by HPLC. The results showed that the N-benzyl-9Z, 12Z-octadecadienamide identification of TLC was a strong mark and specificity. In content determination experiment, the linearity of N-benzyl-9Z, 12Z-octadecadienamide was in the range of 0.01-2 microg (r = 0.9998), and the average recovery (n=9) was 99.27% (RSD 2.0%). The methods were simple, accurate, with good reproducibility. It is suitable for quality control L. meyenii.

  2. National Survey on Internal Quality Control Practice for Lipid Parameters in Laboratories of China from 2014 to 2016.

    PubMed

    Ye, Yuanyuan; Wang, Wei; Zhao, Haijian; He, Falin; Zhong, Kun; Yuan, Shuai; Wang, Zhiguo

    2017-09-01

    To investigate the situation of Internal Quality Control (IQC) practice for total cholesterol, triglycerides, HDL-cholesterol and LDL-cholesterol from 2014 to 2016 in laboratories in China and provide improvement measurements. A web-based External Quality Assessment (EQA) system was used to collect IQC data of lipid parameters in laboratories which continuously participated in the national EQA programs in China from 2014 to 2016. Pass rate of the coefficients of variation (CVs) of two level quality controls in four lipid parameters were calculated according to six quality specifications for precision to evaluate the current status of precision level of the four lipid parameters and their change over time in China. 533, 512, 504, and 466 laboratories continuously reported the data of level one for total cholesterol, triglyceride, HDL-cholesterol and LDL-cholesterol, and 212, 210, 208 and 198 laboratories reported the level two, respectively. The percentage of laboratories meeting the quality specification varied based on different criteria. Non-significant change can be found in the pass rate of CVs over time. The number of laboratories using a closed system increased over time, but still only accounted for a small proportion. There is no significant difference in the pass rate of CVs between closed and open systems. Triglycerides currently have a fairly good performance in China. While the performance of laboratories on total cholesterol, HDL-cholesterol and LDL-cholesterol has yet to be improved.

  3. Total quality management in American industry.

    PubMed

    Widtfeldt, A K; Widtfeldt, J R

    1992-07-01

    The definition of total quality management is conformance to customer requirements and specifications, fitness for use, buyer satisfaction, and value at an affordable price. The three individuals who have developed the total quality management concepts in the United States are W.E. Deming, J.M. Juran, and Philip Crosby. The universal principles of total quality management are (a) a customer focus, (b) management commitment, (c) training, (d) process capability and control, and (e) measurement through quality improvement tools. Results from the National Demonstration Project on Quality Improvement in Health Care showed the principles of total quality management could be applied to healthcare.

  4. USAF Test Pilot School. Flying Qualities Textbook, Volume 2, Part 1

    DTIC Science & Technology

    1986-04-01

    Qualities Flight Testing, Performance and Flying Qaulities Branch, Flight Test Engneerd ision, 6510th Test Wing, Air Force Flight Mayst Ce1ter, Edwards...For these aircraft, the program manager may re*uire a mil spec written specifically for the aircraft and control system involwd. 5.20.2 _EL k,Tt...OR MANAGED IN CONTEXT OF MISSION, WITH AVAILABLE PILOT ATTENTION. S UNCONTROLLABLE CONTROL WILL BE LOST DURING SOME PORTION OF MISSION. ACCEPTABLE

  5. Groundwater-quality and quality-control data for two monitoring wells near Pavillion, Wyoming, April and May 2012

    USGS Publications Warehouse

    Wright, Peter R.; McMahon, Peter B.; Mueller, David K.; Clark, Melanie L.

    2012-01-01

    In June 2010, the U.S. Environmental Protection Agency installed two deep monitoring wells (MW01 and MW02) near Pavillion, Wyoming, to study groundwater quality. During April and May 2012, the U.S Geological Survey, in cooperation with the Wyoming Department of Environmental Quality, collected groundwater-quality data and quality-control data from monitoring well MW01 and, following well redevelopment, quality-control data for monitoring well MW02. Two groundwater-quality samples were collected from well MW01—one sample was collected after purging about 1.5 borehole volumes, and a second sample was collected after purging 3 borehole volumes. Both samples were collected and processed using methods designed to minimize atmospheric contamination or changes to water chemistry. Groundwater-quality samples were analyzed for field water-quality properties (water temperature, pH, specific conductance, dissolved oxygen, oxidation potential); inorganic constituents including naturally occurring radioactive compounds (radon, radium-226 and radium-228); organic constituents; dissolved gasses; stable isotopes of methane, water, and dissolved inorganic carbon; and environmental tracers (carbon-14, chlorofluorocarbons, sulfur hexafluoride, tritium, helium, neon, argon, krypton, xenon, and the ratio of helium-3 to helium-4). Quality-control sample results associated with well MW01 were evaluated to determine the extent to which environmental sample analytical results were affected by bias and to evaluate the variability inherent to sample collection and laboratory analyses. Field documentation, environmental data, and quality-control data for activities that occurred at the two monitoring wells during April and May 2012 are presented.

  6. Modeling in the quality by design environment: Regulatory requirements and recommendations for design space and control strategy appointment.

    PubMed

    Djuris, Jelena; Djuric, Zorica

    2017-11-30

    Mathematical models can be used as an integral part of the quality by design (QbD) concept throughout the product lifecycle for variety of purposes, including appointment of the design space and control strategy, continual improvement and risk assessment. Examples of different mathematical modeling techniques (mechanistic, empirical and hybrid) in the pharmaceutical development and process monitoring or control are provided in the presented review. In the QbD context, mathematical models are predominantly used to support design space and/or control strategies. Considering their impact to the final product quality, models can be divided into the following categories: high, medium and low impact models. Although there are regulatory guidelines on the topic of modeling applications, review of QbD-based submission containing modeling elements revealed concerns regarding the scale-dependency of design spaces and verification of models predictions at commercial scale of manufacturing, especially regarding real-time release (RTR) models. Authors provide critical overview on the good modeling practices and introduce concepts of multiple-unit, adaptive and dynamic design space, multivariate specifications and methods for process uncertainty analysis. RTR specification with mathematical model and different approaches to multivariate statistical process control supporting process analytical technologies are also presented. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Association between disease-specific quality-of-life and magnetic resonance imaging outcomes in a clinical trial of prolotherapy for knee osteoarthritis

    PubMed Central

    Rabago, David; Kijowski, Richard; Woods, Michael; Patterson, Jeffrey J.; Mundt, Marlon; Zgierska, Aleksandra; Grettie, Jessica; Lyftogt, John; Fortney, Luke

    2013-01-01

    Objective To assess the relationship between knee osteoarthritis (KOA)-specific quality-of-life (QoL) and intra-articular cartilage volume (CV) in participants treated with prolotherapy. KOA is characterized by CV loss and multifactorial pain. Prolotherapy is an injection therapy reported to improve KOA-related QoL compared to blinded saline injections and at-home exercise but the mechanism of action is unknown. Design Two-arm (Prolotherapy, Control), partially blinded, controlled trial. Setting Outpatient. Participants 37 adults with ≥3 months of symptomatic KOA. Intervention Prolotherapy: 5 monthly injection sessions; Control: blinded saline injections or at-home exercise. Outcome Measures Primary: KOA-specific QoL scores (baseline, 5, 9, 12, 26, 52 weeks; Western Ontario McMaster University Osteoarthritis Index, WOMAC). Secondary: KOA-specific pain, stiffness, function (WOMAC subscales), magnetic resonance imaging (MRI)-assessed CV (baseline, 52 weeks). Results Knee-specific QoL improvement among Prolotherapy participants exceeded that of Controls (17.6±3.2 versus 8.6±5.0 points, p=0.05) at 52 weeks. Both groups lost CV over time (p<0.05); no between-group differences were noted (p=0.98). While Prolotherapy participants lost CV at varying rates, those who lost the least CV (“Stable CV”) had the greatest improvement in pain scores. Among Prolotherapy, but not Control participants, the change in CV and the change in pain (but not stiffness or function) scores were correlated; each 1% CV loss was associated with 2.7% less improvement in pain score (p<0.05). Conclusions Prolotherapy resulted in safe, substantial improvement in KOA-specific QoL compared to Control over 52-weeks. Among prolotherapy participants, but not Controls, MRI-assessed CV change (CV stability) predicted pain severity score change, suggesting prolotherapy may have pain-specific disease-modifying effect. Further research is warranted. PMID:23850615

  8. Quality control analysis : part IV : field simulation of asphaltic concrete specifications.

    DOT National Transportation Integrated Search

    1969-02-01

    The report present some of the major findings, from a simulated study of statistical specifications, on three asphaltic concrete projects representing a total of approximately 30, 000 tons of hot mix. The major emphasis of the study has been on the a...

  9. Microalgae Nutraceuticals.

    PubMed

    Nicoletti, Marcello

    2016-08-22

    Among the new entries in the food supplements sector, an important place must be assigned to nutraceuticals containing microalgae, nowadays accounting for a large and rapidly expanding market. The marketed products are mainly based on three production strains, i.e., Spirulina and Chlorella, followed at a distance by Klamath. It is a composite situation, since two of them are cyanobacteria and the second one is eukaryotic. The reality is that each presents similarities in shape and appearance concerning the marketed form and several utilizations, and peculiarities that need special attention and adequate studies. First, general information is reported about the current scientific knowledge on each microalga, in particular the nutritional value and properties in prevention and wellbeing. Second, original studies are presented concerning the quality control of marketed products. Quality control is a key argument in nutraceuticals validation. Microalgae are particular organisms that need specific approaches to confirm identity and validate properties. The proposed control of quality is based on microscopic analysis of the morphologic characteristics. The final parts of this paper are dedicated to the need for specificity in uses and claims and to considerations about the future of microalgae in food supplements.

  10. On the methodology of Engineering Geodesy

    NASA Astrophysics Data System (ADS)

    Brunner, Fritz K.

    2007-09-01

    Textbooks on geodetic surveying usually describe a very small number of principles which should provide the foundation of geodetic surveying. Here, the author argues that an applied field, such as engineering geodesy, has a methodology as foundation rather than a few principles. Ten methodological elements (ME) are identified: (1) Point discretisation of natural surfaces and objects, (2) distinction between coordinate and observation domain, (3) definition of reference systems, (4) specification of unknown parameters and desired precisions, (5) geodetic network and observation design, (6) quality control of equipment, (7) quality control of measurements, (8) establishment of measurement models, (9) establishment of parameter estimation models, (10) quality control of results. Each ME consists of a suite of theoretical developments, geodetic techniques and calculation procedures, which will be discussed. This paper is to be considered a first attempt at identifying the specific elements of the methodology of engineering geodesy. A better understanding of this methodology could lead to an increased objectivity, to a transformation of subjective practical experiences into objective working methods, and consequently to a new structure for teaching this rather diverse subject.

  11. Microalgae Nutraceuticals

    PubMed Central

    Nicoletti, Marcello

    2016-01-01

    Among the new entries in the food supplements sector, an important place must be assigned to nutraceuticals containing microalgae, nowadays accounting for a large and rapidly expanding market. The marketed products are mainly based on three production strains, i.e., Spirulina and Chlorella, followed at a distance by Klamath. It is a composite situation, since two of them are cyanobacteria and the second one is eukaryotic. The reality is that each presents similarities in shape and appearance concerning the marketed form and several utilizations, and peculiarities that need special attention and adequate studies. First, general information is reported about the current scientific knowledge on each microalga, in particular the nutritional value and properties in prevention and wellbeing. Second, original studies are presented concerning the quality control of marketed products. Quality control is a key argument in nutraceuticals validation. Microalgae are particular organisms that need specific approaches to confirm identity and validate properties. The proposed control of quality is based on microscopic analysis of the morphologic characteristics. The final parts of this paper are dedicated to the need for specificity in uses and claims and to considerations about the future of microalgae in food supplements. PMID:28231149

  12. Specific deficit analyses in motor performance and quality of life of pediatric cancer patients--a cross-sectional pilot study.

    PubMed

    Beulertz, Julia; Bloch, Wilhelm; Prokop, Aram; Baumann, Freerk T

    2013-05-01

    Although survival rates in childhood cancer have distinctly improved, pediatric cancer patients often experience various disease- and treatment-related side effects with long-term consequences. Despite current studies investigating inactivity and limitations in physical functioning and quality of life in pediatric cancer patients, only little information regarding specific deficits in physical functioning and quality of life has been available until now. No study has yet analyzed these parameters from a global perspective and then identified specific deficits in a mixed childhood cancer population. Within this cross-sectional pilot study, motor performance and quality of life of 26 pediatric cancer patients were assessed after inpatient medical treatment, using standardized motor test batteries (MOT 4-6; DMT 6-18) and a quality of life questionnaire (KINDL®). Reference data have been mainly provided by the German "Children and Young People Health Survey" (KiGGS). Patients achieved lower motor performance scores (p = .000) (more than 27% below the average of healthy peers). Specific deficits were identified in motor speed and motor control (4-6 years), as well as in endurance, strength and coordination under time pressure (6-17 years). In terms of quality of life, no significant differences were examined compared to healthy children of the same age. The results of this study confirm that children with oncological diseases frequently have specific motor problems. Future research in pediatric oncology must investigate the impact of targeted, individualized exercise interventions addressing these specific deficits.

  13. Specific psychological variables predict quality of diet in women of lower, but not higher, educational attainment

    PubMed Central

    Lawrence, Wendy; Schlotz, Wolff; Crozier, Sarah; Skinner, Timothy C; Haslam, Cheryl; Robinson, Sian; Inskip, Hazel; Cooper, Cyrus; Barker, Mary

    2013-01-01

    Our previous work found that perceived control over life was a significant predictor of the quality of diet of women of lower educational attainment. In this paper, we explore the influence on quality of diet of a range of psychological and social factors identified during focus group discussions, and specify the way this differs in women of lower and higher educational attainment. We assessed educational attainment, quality of diet, and psycho-social factors in 378 women attending Sure Start Children’s Centres and baby clinics in Southampton, UK. Multiple-group path analysis showed that in women of lower educational attainment, the effect of general self-efficacy on quality of diet was mediated through perceptions of control and through food involvement, but that there were also direct effects of social support for healthy eating and having positive outcome expectancies. There was no effect of self-efficacy, perceived control or outcome expectancies on the quality of diet of women of higher educational attainment, though having more social support and food involvement were associated with improved quality of diet in these women. Our analysis confirms our hypothesis that control-related factors are more important in determining dietary quality in women of lower educational attainment than in women of higher educational attainment. PMID:21078352

  14. Specific psychological variables predict quality of diet in women of lower, but not higher, educational attainment.

    PubMed

    Lawrence, Wendy; Schlotz, Wolff; Crozier, Sarah; Skinner, Timothy C; Haslam, Cheryl; Robinson, Sian; Inskip, Hazel; Cooper, Cyrus; Barker, Mary

    2011-02-01

    Our previous work found that perceived control over life was a significant predictor of the quality of diet of women of lower educational attainment. In this paper, we explore the influence on quality of diet of a range of psychological and social factors identified during focus group discussions, and specify the way this differs in women of lower and higher educational attainment. We assessed educational attainment, quality of diet, and psycho-social factors in 378 women attending Sure Start Children's Centres and baby clinics in Southampton, UK. Multiple-group path analysis showed that in women of lower educational attainment, the effect of general self-efficacy on quality of diet was mediated through perceptions of control and through food involvement, but that there were also direct effects of social support for healthy eating and having positive outcome expectancies. There was no effect of self-efficacy, perceived control or outcome expectancies on the quality of diet of women of higher educational attainment, though having more social support and food involvement were associated with improved quality of diet in these women. Our analysis confirms our hypothesis that control-related factors are more important in determining dietary quality in women of lower educational attainment than in women of higher educational attainment. Copyright © 2010 Elsevier Ltd. All rights reserved.

  15. Are the clinical effects of homoeopathy placebo effects? Comparative study of placebo-controlled trials of homoeopathy and allopathy.

    PubMed

    Shang, Aijing; Huwiler-Müntener, Karin; Nartey, Linda; Jüni, Peter; Dörig, Stephan; Sterne, Jonathan A C; Pewsner, Daniel; Egger, Matthias

    Homoeopathy is widely used, but specific effects of homoeopathic remedies seem implausible. Bias in the conduct and reporting of trials is a possible explanation for positive findings of trials of both homoeopathy and conventional medicine. We analysed trials of homoeopathy and conventional medicine and estimated treatment effects in trials least likely to be affected by bias. Placebo-controlled trials of homoeopathy were identified by a comprehensive literature search, which covered 19 electronic databases, reference lists of relevant papers, and contacts with experts. Trials in conventional medicine matched to homoeopathy trials for disorder and type of outcome were randomly selected from the Cochrane Controlled Trials Register (issue 1, 2003). Data were extracted in duplicate and outcomes coded so that odds ratios below 1 indicated benefit. Trials described as double-blind, with adequate randomisation, were assumed to be of higher methodological quality. Bias effects were examined in funnel plots and meta-regression models. 110 homoeopathy trials and 110 matched conventional-medicine trials were analysed. The median study size was 65 participants (range ten to 1573). 21 homoeopathy trials (19%) and nine (8%) conventional-medicine trials were of higher quality. In both groups, smaller trials and those of lower quality showed more beneficial treatment effects than larger and higher-quality trials. When the analysis was restricted to large trials of higher quality, the odds ratio was 0.88 (95% CI 0.65-1.19) for homoeopathy (eight trials) and 0.58 (0.39-0.85) for conventional medicine (six trials). Biases are present in placebo-controlled trials of both homoeopathy and conventional medicine. When account was taken for these biases in the analysis, there was weak evidence for a specific effect of homoeopathic remedies, but strong evidence for specific effects of conventional interventions. This finding is compatible with the notion that the clinical effects of homoeopathy are placebo effects.

  16. Printing quality control automation

    NASA Astrophysics Data System (ADS)

    Trapeznikova, O. V.

    2018-04-01

    One of the most important problems in the concept of standardizing the process of offset printing is the control the quality rating of printing and its automation. To solve the problem, a software has been developed taking into account the specifics of printing system components and the behavior in printing process. In order to characterize the distribution of ink layer on the printed substrate the so-called deviation of the ink layer thickness on the sheet from nominal surface is suggested. The geometric data construction the surface projections of the color gamut bodies allows to visualize the color reproduction gamut of printing systems in brightness ranges and specific color sectors, that provides a qualitative comparison of the system by the reproduction of individual colors in a varying ranges of brightness.

  17. 78 FR 67327 - Approval and Promulgation of Air Quality Implementation Plans; State of Colorado; Revised...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-12

    ... shall include procedures for interagency consultation, conflict resolution, and public consultation... Determinations by the public, Air Quality Control Commission, and resolution of conflicts''. (2) 40 CFR 93.122(a... of 93.105(d) require specific procedures for resolving conflicts, and the provisions of 93.105(e...

  18. CONTRIBUTIONS OF QUALITY ASSURANCE/QUALITY CONTROL TO EMERGING TECHNIQUES IN ECOLOGY: NOT JUST FOR CHEMISTS ANYMORE

    EPA Science Inventory

    The structure of biological monitoring designs has become critical as support not only for assessments of condition under Section 305(b) of the Clean Water Act but also as the starting point for site-specific determinations of impairment, diagnosis of causes of impairment, alloca...

  19. CALiPER Retail Lamps Study 3.1: Dimming, Flicker, and Power Quality Characteristics of LED A Lamps

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    2014-12-31

    This CALiPER report examines the characteristics of a subset of lamps from CALiPER Retail Lamps Study 3 in more detail. Specifically, it focuses on the dimming, power quality, and flicker characteristics of 14 LED A lamps, as controlled by four different retail-available dimmers.

  20. 75 FR 8047 - Notice of Intent To Prepare a Joint Environmental Impact Statement and Environmental Impact...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-23

    ..., and the Contra Costa County Flood Control and Water Conservation District (CCCFCWCD) will serve as... be analyzed in depth in the EIS/EIR include project specific and cumulative effects on hydraulics..., cultural resources, recreation, land use, fisheries, water quality, air quality, and transportation. c...

  1. Pressure ulcer prevention in patients with advanced illness.

    PubMed

    White-Chu, E Foy; Reddy, Madhuri

    2013-03-01

    Pressure ulcers can be challenging to prevent, particularly in patients with advanced illnesses. This review summarizes the relevant literature since 2011. Through a MEDLINE and CINAHL database search from January 1, 2011 to June 1, 2012, a total of 14 abstracts were found addressing the prevention of pressure ulcers in persons with advanced illness. Search terms included pressure ulcer, prevention, and control. Advanced illness was defined as patients transitioning from curative to supportive and palliative care. Ten original studies and four review articles specifically addressed pressure ulcer prevention. There were four articles that specifically addressed patients with advanced illness. The studies varied in quality. One systematic review, one randomized controlled trial, three prospective trials, two retrospective trials, one cost-effectiveness analysis, one quality improvement project, one comparative descriptive design, and four review articles were found. The interventions for pressure ulcer prevention were risk assessment, repositioning, surface selection, nutritional support and maintenance of skin integrity with or without incontinence. The quality of pressure ulcer prevention studies in persons with advanced illness is poor. Increased number and higher quality studies are needed to further investigate this important topic for these fragile patients.

  2. Effects of behavioral stress reduction Transcendental Meditation intervention in Persons with HIV

    PubMed Central

    Chhatre, Sumedha; Metzger, David S.; Frank, Ian; Boyer, Jean; Thompson, Edward; Nidich, Sanford; Montaner, Luis J.; Jayadevappa, Ravishankar

    2013-01-01

    Stress is implicated in the pathogenesis and progression of HIV. The Transcendental Meditation is a behavioral stress reduction program that incorporates mind-body approach, and has demonstrated effectiveness in improving outcomes via stress reduction. We evaluated the feasibility of implementing Transcendental Meditation and its effects on outcomes in persons with HIV. In this community based single blinded Phase-I, randomized controlled trial, outcomes (psychological and physiological stress, immune activation, generic and HIV-specific health related quality of life, depression and quality of well-being) were assessed at baseline and at six months, and were compared using parametric and non-parametric tests. Twenty two persons with HIV were equally randomized to Transcendental Meditation intervention or healthy eating (HE) education control group. Retention was 100% in Transcendental Meditation group and 91% in healthy eating control group. The Transcendental Meditation group exhibited significant improvement in vitality. Significant between group differences were observed for generic and HIV-specific health related quality of life.. Small sample size may possibly limit the ability to observe significant differences in some outcomes. Transcendental Meditation stress reduction intervention in community dwelling adults with HIV is viable and can enhance health related quality of life. Further research with large sample and longer follow-up is needed to validate our results. PMID:23394825

  3. Study of twenty preparations of human albumin solution which failed in quality control testing due to elevated sodium content, a poor internal quality control at manufacturing unit.

    PubMed

    Prasad, J P; Madhu, Y; Singh, Surinder; Soni, G R; Agnihotri, N; Singh, Varsha; Kumar, Pradeep; Jain, Nidhi; Prakash, Anu; Singh, Varun

    2016-11-01

    Current study is conducted in our laboratory due to failure in quality control testing of twenty batches of Human Albumin solution in which sodium content is higher than the prescribed limit. These batches are received in short duration from indigenous manufacturer and is the first incident of failure of Human albumin preparation in sodium content of manufacturer. On request of manufacturer, study is conducted to rule out the cause. Repeat testing of each out of specification batch is conducted and a trend analysis is drawn between our findings and manufacturer's results, also study of trend analysis of manufacturer for the last one year. Trend analysis data indicated towards poor consistency of batches with major shift at various time intervals in sodium content of human albumin preparation. Further analysis rule out that non-traceable quality of standard used in the internal quality control testing by manufacturer is the root cause of the problem. Copyright © 2016 International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

  4. Internal quality control: planning and implementation strategies.

    PubMed

    Westgard, James O

    2003-11-01

    The first essential in setting up internal quality control (IQC) of a test procedure in the clinical laboratory is to select the proper IQC procedure to implement, i.e. choosing the statistical criteria or control rules, and the number of control measurements, according to the quality required for the test and the observed performance of the method. Then the right IQC procedure must be properly implemented. This review focuses on strategies for planning and implementing IQC procedures in order to improve the quality of the IQC. A quantitative planning process is described that can be implemented with graphical tools such as power function or critical-error graphs and charts of operating specifications. Finally, a total QC strategy is formulated to minimize cost and maximize quality. A general strategy for IQC implementation is recommended that employs a three-stage design in which the first stage provides high error detection, the second stage low false rejection and the third stage prescribes the length of the analytical run, making use of an algorithm involving the average of normal patients' data.

  5. qcML: An Exchange Format for Quality Control Metrics from Mass Spectrometry Experiments*

    PubMed Central

    Walzer, Mathias; Pernas, Lucia Espona; Nasso, Sara; Bittremieux, Wout; Nahnsen, Sven; Kelchtermans, Pieter; Pichler, Peter; van den Toorn, Henk W. P.; Staes, An; Vandenbussche, Jonathan; Mazanek, Michael; Taus, Thomas; Scheltema, Richard A.; Kelstrup, Christian D.; Gatto, Laurent; van Breukelen, Bas; Aiche, Stephan; Valkenborg, Dirk; Laukens, Kris; Lilley, Kathryn S.; Olsen, Jesper V.; Heck, Albert J. R.; Mechtler, Karl; Aebersold, Ruedi; Gevaert, Kris; Vizcaíno, Juan Antonio; Hermjakob, Henning; Kohlbacher, Oliver; Martens, Lennart

    2014-01-01

    Quality control is increasingly recognized as a crucial aspect of mass spectrometry based proteomics. Several recent papers discuss relevant parameters for quality control and present applications to extract these from the instrumental raw data. What has been missing, however, is a standard data exchange format for reporting these performance metrics. We therefore developed the qcML format, an XML-based standard that follows the design principles of the related mzML, mzIdentML, mzQuantML, and TraML standards from the HUPO-PSI (Proteomics Standards Initiative). In addition to the XML format, we also provide tools for the calculation of a wide range of quality metrics as well as a database format and interconversion tools, so that existing LIMS systems can easily add relational storage of the quality control data to their existing schema. We here describe the qcML specification, along with possible use cases and an illustrative example of the subsequent analysis possibilities. All information about qcML is available at http://code.google.com/p/qcml. PMID:24760958

  6. qcML: an exchange format for quality control metrics from mass spectrometry experiments.

    PubMed

    Walzer, Mathias; Pernas, Lucia Espona; Nasso, Sara; Bittremieux, Wout; Nahnsen, Sven; Kelchtermans, Pieter; Pichler, Peter; van den Toorn, Henk W P; Staes, An; Vandenbussche, Jonathan; Mazanek, Michael; Taus, Thomas; Scheltema, Richard A; Kelstrup, Christian D; Gatto, Laurent; van Breukelen, Bas; Aiche, Stephan; Valkenborg, Dirk; Laukens, Kris; Lilley, Kathryn S; Olsen, Jesper V; Heck, Albert J R; Mechtler, Karl; Aebersold, Ruedi; Gevaert, Kris; Vizcaíno, Juan Antonio; Hermjakob, Henning; Kohlbacher, Oliver; Martens, Lennart

    2014-08-01

    Quality control is increasingly recognized as a crucial aspect of mass spectrometry based proteomics. Several recent papers discuss relevant parameters for quality control and present applications to extract these from the instrumental raw data. What has been missing, however, is a standard data exchange format for reporting these performance metrics. We therefore developed the qcML format, an XML-based standard that follows the design principles of the related mzML, mzIdentML, mzQuantML, and TraML standards from the HUPO-PSI (Proteomics Standards Initiative). In addition to the XML format, we also provide tools for the calculation of a wide range of quality metrics as well as a database format and interconversion tools, so that existing LIMS systems can easily add relational storage of the quality control data to their existing schema. We here describe the qcML specification, along with possible use cases and an illustrative example of the subsequent analysis possibilities. All information about qcML is available at http://code.google.com/p/qcml. © 2014 by The American Society for Biochemistry and Molecular Biology, Inc.

  7. Mission-oriented requirements for updating MIL-H-8501. Volume 1: STI proposed structure. [military rotorcraft

    NASA Technical Reports Server (NTRS)

    Clement, W. F.; Hoh, R. H.; Ferguson, S. W., III; Mitchell, D. G.; Ashkenas, I. L.; Mcruer, D. T.

    1985-01-01

    The structure of a new flying and ground handling qualities specification for military rotorcraft is presented. This preliminary specification structure is intended to evolve into a replacement for specification MIL-H-8501A. The new structure is designed to accommodate a variety of rotorcraft types, mission flight phases, flight envelopes, and flight environmental characteristics and to provide criteria for three levels of flying qualities, a systematic treatment of failures and reliability, both conventional and multiaxis controllers, and external vision aids which may also incorporate synthetic display content. Existing and new criteria were incorporated into the new structure wherever they could be substantiated.

  8. A Randomized Controlled Trial of Relationship Education in the U.S. Army: 2-Year Outcomes

    PubMed Central

    Stanley, Scott M.; Rhoades, Galena K.; Loew, Benjamin A.; Allen, Elizabeth S.; Carter, Sarah; Osborne, Laura J.; Prentice, Donnella; Markman, Howard J.

    2014-01-01

    This study examined the effectiveness of an evidence-based, community-delivered adaptation of couple relationship education (CRE; specifically, PREP, The Prevention and Relationship Enhancement Program) delivered at two Army installations. The study is a randomized controlled trial with two years of follow-up, examining marital quality and stability. Sample composition was 662 married couples with a spouse in the U.S. Army. Analyses yielded no evidence of overall enduring intervention effects on relationship quality but couples assigned to intervention at the higher risk site were significantly less likely than controls to be divorced at the two-year follow-up (8.1% vs. 14.9%, p < .01). This effect was moderated by ethnic minority status. Specifically, the impact of the intervention on divorce was strongest for minority couples. The findings add to the literature on who may benefit most from CRE. PMID:25419027

  9. Evaluation of thin-layer chromatography methods for quality control of commercial products containing Aesculus hippocastanum, Turnera diffusa, Matricaria recutita, Passiflora incarnata, and Tilia occidentalis.

    PubMed

    Ramírez-Durón, Rosalba; Ceniceros-Almaguer, Lucía; Salazar-Aranda, Ricardo; Salazar-Cavazos, Ma de la Luz; Waksman de Torres, Noemi

    2007-01-01

    In Mexico, plant-derived products with health claims are sold as herbal dietary supplements, and there are no rules for their legal quality control. Aesculus hippocastanum, Turnera diffusa, Matricaria recutita, Passiflora incarnata, and Tilia occidentalis are some of the major commercial products obtained from plants used in this region. In this paper, we describe the effectiveness of thin-layer chromatography methods to provide for the quality control of several commercial products containing these plants. Standardized extracts were used. Of the 49 commercial products analyzed, only 32.65% matched the chromatographic characteristic of standardized extracts. A significant number of commercial products did not match their label, indicating a problem resulting from the lack of regulation for these products. The proposed methods are simple, sensitive, and specific and can be used for routine quality control of raw herbals and formulations of the tested plants. The results obtained show the need to develop simple and reliable analytical methods that can be performed in any laboratory for the purpose of quality control of dietary supplements or commercial herbal products sold in Mexico.

  10. Quality assurance and control in the production and static tests of the solid rocket boosters for the Space Shuttle

    NASA Technical Reports Server (NTRS)

    Cerny, O. F.

    1979-01-01

    The paper surveys the various aspects of design and overhaul of the solid rocket boosters. It is noted that quality control is an integral part of the design specifications. Attention is given to the production process which is optimized towards highest quality. Also discussed is the role of the DCA (Defense Contract Administration) in inspecting the products of subcontractors, noting that the USAF performs this role for prime contractors. Fabrication and construction of the booster is detailed with attention given to the lining of the booster cylinder and the mixing of the propellant and the subsequent X-ray inspection.

  11. Application of indices Cp and Cpk to improve quality control capability in clinical biochemistry laboratories.

    PubMed

    Chen, Ming-Shu; Wu, Ming-Hsun; Lin, Chih-Ming

    2014-04-30

    The traditional criteria for acceptability of analytic quality may not be objective in clinical laboratories. To establish quality control procedures intended to enhance Westgard multi-rules for improving the quality of clinical biochemistry tests, we applied the Cp and Cpk quality-control indices to monitor tolerance fitting and systematic variation of clinical biochemistry test results. Daily quality-control data of a large Taiwanese hospital in 2009 were analyzed. The test items were selected based on an Olympus biochemistry machine and included serum albumin, aspartate aminotransferase, cholesterol, glucose and potassium levels. Cp and Cpk values were calculated for normal and abnormal levels, respectively. The tolerance range was estimated with data from 50 laboratories using the same instruments and reagents. The results showed a monthly trend of variation for the five items under investigation. The index values of glucose were lower than those of the other items, and their values were usually <2. In contrast to the Cp value for cholesterol, Cpk of cholesterol was lower than 2, indicating a systematic error that should be further investigated. This finding suggests a degree of variation or failure to meet specifications that should be corrected. The study indicated that Cp and Cpk could be applied not only for monitoring variations in quality control, but also for revealing inter-laboratory qualitycontrol capability differences.

  12. 46 CFR 160.047-5 - Inspections and tests. 1

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoyant Vest, Kapok or Fibrous Glass, Adult... labeled buoyant vests shall— (1) Maintain quality control of the materials used, the manufacturing methods.... (b) Lot size and sampling. (1) A lot consists of 500 buoyant vests or fewer. (2) A new lot begins...

  13. 46 CFR 160.047-5 - Inspections and tests. 1

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoyant Vest, Kapok or Fibrous Glass, Adult... labeled buoyant vests shall— (1) Maintain quality control of the materials used, the manufacturing methods.... (b) Lot size and sampling. (1) A lot consists of 500 buoyant vests or fewer. (2) A new lot begins...

  14. 46 CFR 160.047-5 - Inspections and tests. 1

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Specification for a Buoyant Vest, Kapok or Fibrous Glass, Adult... labeled buoyant vests shall— (1) Maintain quality control of the materials used, the manufacturing methods.... (b) Lot size and sampling. (1) A lot consists of 500 buoyant vests or fewer. (2) A new lot begins...

  15. Quality Assurance Project Plan for Closure of the Central Facilities Area Sewage Treatment Plant Lagoon 3 and Land Application Area

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lewis, Michael G.

    This quality assurance project plan describes the technical requirements and quality assurance activities of the environmental data collection/analyses operations to close Central Facilities Area Sewage treatment Plant Lagoon 3 and the land application area. It describes the organization and persons involved, the data quality objectives, the analytical procedures, and the specific quality control measures to be employed. All quality assurance project plan activities are implemented to determine whether the results of the sampling and monitoring performed are of the right type, quantity, and quality to satisfy the requirements for closing Lagoon 3 and the land application area.

  16. Situational and affective risk situations of relapse and the quality of implementation intentions in an e-health smoking relapse prevention programme.

    PubMed

    Elfeddali, Iman; Bolman, Catherine; de Vries, Hein

    2013-06-01

    The quality of coping plans made to deal with personal smoking related risk situations and the relation between plan quality (PQ) and continued smoking abstinence (CA) were assessed. The respondents (N = 563) were smokers who had made a coping planning assignment in the experimental conditions of a larger randomized controlled trial. Descriptive and logistic regression analyses were conducted. The specificity of the plans made was related to short and long-term CA and was significantly lower for plans made to deal with situational situations. More research on how to foster specificity and target the difficulties that quitters have with specifying plans for affective situations is required.

  17. #Sleepyteens: Social media use in adolescence is associated with poor sleep quality, anxiety, depression and low self-esteem.

    PubMed

    Woods, Heather Cleland; Scott, Holly

    2016-08-01

    This study examined how social media use related to sleep quality, self-esteem, anxiety and depression in 467 Scottish adolescents. We measured overall social media use, nighttime-specific social media use, emotional investment in social media, sleep quality, self-esteem and levels of anxiety and depression. Adolescents who used social media more - both overall and at night - and those who were more emotionally invested in social media experienced poorer sleep quality, lower self-esteem and higher levels of anxiety and depression. Nighttime-specific social media use predicted poorer sleep quality after controlling for anxiety, depression and self-esteem. These findings contribute to the growing body of evidence that social media use is related to various aspects of wellbeing in adolescents. In addition, our results indicate that nighttime-specific social media use and emotional investment in social media are two important factors that merit further investigation in relation to adolescent sleep and wellbeing. Copyright © 2016 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

  18. Effects of acupuncture on quality of life and pain in patients with osteoporosis-a pilot randomized controlled trial.

    PubMed

    Schiller, Joerg; Korallus, Christoph; Bethge, Matthias; Karst, Matthias; Schmalhofer, Marie-Lena; Gutenbrunner, Christoph; Fink, Matthias Georg

    2016-12-01

    In this sham-controlled study, 53 patients received 10 sessions of acupuncture treatment over 5 weeks to investigate the effects of acupuncture on the pain and quality of life of patients with osteoporosis. The results showed significant favorable effects of verum acupuncture on quality of life. Both interventions showed sustained and clinically relevant effects on pain. Standard analgesic treatment is associated with adverse events in patients with osteoporosis, especially elderly and/or comorbid patients. As acupuncture has gained widespread acceptance as a complementary treatment modality with few side effects, the aim of this study was to evaluate the effects of acupuncture on the pain and quality of life of patients with osteoporosis. In total, 53 patients with vertebral compression fractures, osteoporosis-associated spinal deformities, and resultant pain were randomly allocated to the verum acupuncture with deep needling of specific points following the principles of traditional Chinese medicine (n = 29) or control acupuncture group with superficial needling of non-acupuncture points (n = 24). All patients received 10 sessions of standardized verum or control acupuncture treatment over 5 weeks. Pain (VAS score 1-100) and quality of life (QUALEFFO-41) were measured at the start of treatment (T0), before each acupuncture session (T1), and at 1 (T2) and 3 months (T3) post-treatment. Both acupuncture treatments significantly reduced activity-related pain and pain at rest over time. The verum acupuncture group experienced a significantly greater reduction in mean pain intensity at rest than the control group. In the control group, quality of life improved only temporarily post-treatment (T2) and slightly declined at the end of the follow-up period (T3). In contrast, patients in the verum acupuncture group experienced continuous and significant improvements in quality of life up to 3 months after treatment (T3). Both types of acupuncture were equally effective in producing sustained, clinically relevant pain relief in patients with osteoporosis. Verum acupuncture had stronger and longer-lasting effects on quality of life and pain at rest. The possible reasons for these findings include the specificity of acupuncture point selection and the performance of needle stimulation.

  19. Flight Measurements of the Flying Qualities of a Lockheed P-80A Airplane (Army No. 44-85099): Lateral- and Directional-Stability and Control Characteristics

    NASA Technical Reports Server (NTRS)

    Anderson, Seth B.; Cooper, George E.

    1947-01-01

    This report contains the flight-test results of the lateral and directional-stability and control phase (including tests with wing-tip tanks) of a general flying-qualities investigation of the Lockheed P-80A airplane (Army No. 44-85099). These tests were conducted at indicated airspeeds up to 494 miles per hour (0.691 Mach number) at low altitude and up to 378 miles per hour (0.816 Mach number) at high altitude. These tests showed that the flying qualities of the airplane were for the most part in accordance with the requirements of the Army Air Forces Stability and Control Specifications. The only major deficiency noted was the negative lateral stability with the wing-tip tanks installed.

  20. Quality assurance of the international computerised 24 h dietary recall method (EPIC-Soft).

    PubMed

    Crispim, Sandra P; Nicolas, Genevieve; Casagrande, Corinne; Knaze, Viktoria; Illner, Anne-Kathrin; Huybrechts, Inge; Slimani, Nadia

    2014-02-01

    The interview-administered 24 h dietary recall (24-HDR) EPIC-Soft® has a series of controls to guarantee the quality of dietary data across countries. These comprise all steps that are part of fieldwork preparation, data collection and data management; however, a complete characterisation of these quality controls is still lacking. The present paper describes in detail the quality controls applied in EPIC-Soft, which are, to a large extent, built on the basis of the EPIC-Soft error model and are present in three phases: (1) before, (2) during and (3) after the 24-HDR interviews. Quality controls for consistency and harmonisation are implemented before the interviews while preparing the seventy databases constituting an EPIC-Soft version (e.g. pre-defined and coded foods and recipes). During the interviews, EPIC-Soft uses a cognitive approach by helping the respondent to recall the dietary intake information in a stepwise manner and includes controls for consistency (e.g. probing questions) as well as for completeness of the collected data (e.g. system calculation for some unknown amounts). After the interviews, a series of controls can be applied by dietitians and data managers to further guarantee data quality. For example, the interview-specific 'note files' that were created to track any problems or missing information during the interviews can be checked to clarify the information initially provided. Overall, the quality controls employed in the EPIC-Soft methodology are not always perceivable, but prove to be of assistance for its overall standardisation and possibly for the accuracy of the collected data.

  1. Meditation training for people with amyotrophic lateral sclerosis: a randomized clinical trial.

    PubMed

    Pagnini, F; Marconi, A; Tagliaferri, A; Manzoni, G M; Gatto, R; Fabiani, V; Gragnano, G; Rossi, G; Volpato, E; Banfi, P; Palmieri, A; Graziano, F; Castelnuovo, G; Corbo, M; Molinari, E; Riva, N; Sansone, V; Lunetta, C

    2017-04-01

    Studies investigating psychological interventions for the promotion of well-being in people with amyotrophic lateral sclerosis (ALS) are lacking. The purpose of the current study was to examine the use of an ALS-specific mindfulness-based intervention for improving quality of life in this population. A randomized, open-label and controlled clinical trial was conducted on the efficacy of an ALS-specific meditation programme in promoting quality of life. Adults who received a diagnosis of ALS within 18 months were randomly assigned either to usual care or to an 8-week meditation training based on the original mindfulness-based stress reduction programme and tailored for people with ALS. Quality of life, assessed with the ALS-Specific Quality of Life Revised scale, represented the primary outcome, whilst secondary outcomes included anxiety and depression, assessed with the Hospital Anxiety and Depression Scale, and specific quality of life domains. Participants were assessed at recruitment and after 2, 6 and 12 months. The efficacy of the treatment was assessed on an intention-to-treat basis of a linear mixed model. A hundred participants were recruited between November 2012 and December 2014. Over time, there was a significant difference between the two groups in terms of quality of life (β = 0.24, P = 0.015, d = 0.89). Significant differences between groups over time were also found for anxiety, depression, negative emotions, and interaction with people and the environment. An ALS-specific meditation programme is beneficial for the quality of life and psychological well-being of people with ALS. © 2017 EAN.

  2. Dahuk Rehabilitation Center. Dahuk, Iraq

    DTIC Science & Technology

    2007-01-08

    this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services , Directorate for Information...construction services . As a result, it was very likely that the project would be successfully completed without major issues related to inadequate design...visit. Specifically, Quality Control and Quality Assurance personnel were well informed about the history and progression of the project and its

  3. WHO Expert Committee on Specifications for Pharmaceutical Preparations.

    PubMed

    2003-01-01

    This report presents the recommendations of an international group of experts convened by the World Health Organization to consider matters concerning the quality assurance of pharmaceuticals and specifications for drug substances and dosage forms. Of particular relevance to drug regulatory authorities and pharmaceutical manufacturers, the report discusses activities related to the development of The International Pharmacopoeia and basic tests for pharmaceutical substances and dosage forms, as well as quality control of reference materials, good manufacturing practices (GMP), stability studies, inspection, hazard analysis, procurement, storage and other aspects of quality assurance of pharmaceuticals, and regulatory issues. The report is complemented by a number of annexes, including recommendations on the risk of transmitting animal spongiform encephalopathy agents via medicinal products, guidelines on GMP for pharmaceutical products, a model certificate for GMP and guidance on a GMP inspection report. The final annexes provide guidance on the application of Hazard Analysis and Critical Control Point (HACCP) method to pharmaceuticals, good storage practices and a procedure for assessing acceptability of pharmaceutical products for purchase by United Nations agencies.

  4. Performance Measurement and Target-Setting in California's Safety Net Health Systems.

    PubMed

    Hemmat, Shirin; Schillinger, Dean; Lyles, Courtney; Ackerman, Sara; Gourley, Gato; Vittinghoff, Eric; Handley, Margaret; Sarkar, Urmimala

    Health policies encourage implementing quality measurement with performance targets. The 2010-2015 California Medicaid waiver mandated quality measurement and reporting. In 2013, California safety net hospitals participating in the waiver set a voluntary performance target (the 90th percentile for Medicare preferred provider organization plans) for mammography screening and cholesterol control in diabetes. They did not reach the target, and the difference-in-differences analysis suggested that there was no difference for mammography ( P = .39) and low-density lipoprotein control ( P = .11) performance compared to measures for which no statewide quality improvement initiative existed. California's Medicaid waiver was associated with improved performance on a number of metrics, but this performance was not attributable to target setting on specific health conditions. Performance may have improved because of secular trends or systems improvements related to waiver funding. Relying on condition-specific targets to measure performance may underestimate improvements and disadvantage certain health systems. Achieving ambitious targets likely requires sustained fiscal, management, and workforce investments.

  5. 40 CFR 60.57b - Siting requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... on ambient air quality, visibility, soils, and vegetation. (2) The analysis shall consider air pollution control alternatives that minimize, on a site-specific basis, to the maximum extent practicable...

  6. Control of Technology Transfer at JPL

    NASA Technical Reports Server (NTRS)

    Oliver, Ronald

    2006-01-01

    Controlled Technology: 1) Design: preliminary or critical design data, schematics, technical flow charts, SNV code/diagnostics, logic flow diagrams, wirelist, ICDs, detailed specifications or requirements. 2) Development: constraints, computations, configurations, technical analyses, acceptance criteria, anomaly resolution, detailed test plans, detailed technical proposals. 3) Production: process or how-to: assemble, operated, repair, maintain, modify. 4) Manufacturing: technical instructions, specific parts, specific materials, specific qualities, specific processes, specific flow. 5) Operations: how-to operate, contingency or standard operating plans, Ops handbooks. 6) Repair: repair instructions, troubleshooting schemes, detailed schematics. 7) Test: specific procedures, data, analysis, detailed test plan and retest plans, detailed anomaly resolutions, detailed failure causes and corrective actions, troubleshooting, trended test data, flight readiness data. 8) Maintenance: maintenance schedules and plans, methods for regular upkeep, overhaul instructions. 9) Modification: modification instructions, upgrades kit parts, including software

  7. Design Specification for a Thrust-Vectoring, Actuated-Nose-Strake Flight Control Law for the High-Alpha Research Vehicle

    NASA Technical Reports Server (NTRS)

    Bacon, Barton J.; Carzoo, Susan W.; Davidson, John B.; Hoffler, Keith D.; Lallman, Frederick J.; Messina, Michael D.; Murphy, Patrick C.; Ostroff, Aaron J.; Proffitt, Melissa S.; Yeager, Jessie C.; hide

    1996-01-01

    Specifications for a flight control law are delineated in sufficient detail to support coding the control law in flight software. This control law was designed for implementation and flight test on the High-Alpha Research Vehicle (HARV), which is an F/A-18 aircraft modified to include an experimental multi-axis thrust-vectoring system and actuated nose strakes for enhanced rolling (ANSER). The control law, known as the HARV ANSER Control Law, was designed to utilize a blend of conventional aerodynamic control effectors, thrust vectoring, and actuated nose strakes to provide increased agility and good handling qualities throughout the HARV flight envelope, including angles of attack up to 70 degrees.

  8. Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York - July 2005 through June 2007

    USGS Publications Warehouse

    Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

    2009-01-01

    The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's Lab Master data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality control samples analyzed from July 2005 through June 2007. Results for the quality-control samples for 19 analytical procedures were evaluated for bias and precision. Control charts indicate that data for eight of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: total aluminum, calcium, magnesium, nitrate (colorimetric method), potassium, silicon, sodium, and sulfate. Eight of the analytical procedures were biased throughout the analysis period for the high-concentration sample, but were within control limits; these procedures were: total aluminum, calcium, dissolved organic carbon, chloride, nitrate (ion chromatograph), potassium, silicon, and sulfate. The magnesium and pH procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The acid-neutralizing capacity, total monomeric aluminum, nitrite, and specific conductance procedures were biased for the high-concentration and low-concentration samples, but were within control limits. Results from the filter-blank and analytical-blank analyses indicated that the procedures for 16 of 17 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for dissolved organic carbon. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 18 of the 21 analytes. At least 93 percent of the samples met data-quality objectives for all analytes except acid-neutralizing capacity (85 percent of samples met objectives), total monomeric aluminum (83 percent of samples met objectives), total aluminum (85 percent of samples met objectives), and chloride (85 percent of samples met objectives). The ammonium and total dissolved nitrogen did not meet the data-quality objectives. Results of the USGS interlaboratory Standard Reference Sample (SRS) Project met the Troy Laboratory data-quality objectives for 87 percent of the samples analyzed. The P-sample (low-ionic-strength constituents) analysis had two outliers each in two studies. The T-sample (trace constituents) analysis and the N-sample (nutrient constituents) analysis had one outlier each in two studies. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 85 percent of the samples met data-quality objectives for 11 of the 14 analytes; the exceptions were acid-neutralizing capacity, total aluminum and ammonium. Data-quality objectives were not met in 41 percent of samples analyzed for acid-neutralizing capacity, 50 percent of samples analyzed for total aluminum, and 44 percent of samples analyzed for ammonium. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 86 percent of the samples analyzed for calcium, magnesium, pH, potassium, and sodium. Data-quality objectives were met by 76 percent of the samples analyzed for chloride, 80 percent of the samples analyzed for specific conductance, and 77 percent of the samples analyzed for sulfate.

  9. Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York - July 2001 Through June 2003

    USGS Publications Warehouse

    Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

    2009-01-01

    The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's Lab Master data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality control samples analyzed from July 2001 through June 2003. Results for the quality-control samples for 19 analytical procedures were evaluated for bias and precision. Control charts indicate that data for six of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, chloride, magnesium, nitrate (ion chromatography), potassium, and sodium. The calcium procedure was biased throughout the analysis period for the high-concentration sample, but was within control limits. The total monomeric aluminum and fluoride procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The total aluminum, pH, specific conductance, and sulfate procedures were biased for the high-concentration and low-concentration samples, but were within control limits. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 16 of 18 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for the dissolved organic carbon or specific conductance procedures. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 18 of the 21 analytes. At least 90 percent of the samples met data-quality objectives for all procedures except total monomeric aluminum (83 percent of samples met objectives), total aluminum (76 percent of samples met objectives), ammonium (73 percent of samples met objectives), dissolved organic carbon (86 percent of samples met objectives), and nitrate (81 percent of samples met objectives). The data-quality objective was not met for the nitrite procedure. Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated satisfactory or above data quality over the time period, with most performance ratings for each sample in the good-to-excellent range. The N-sample (nutrient constituents) analysis had one unsatisfactory rating for the ammonium procedure in one study. The T-sample (trace constituents) analysis had one unsatisfactory rating for the magnesium procedure and one marginal rating for the potassium procedure in one study and one unsatisfactory rating for the sodium procedure in another. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 90 percent of the samples met data-quality objectives for 10 of the 14 analytes; the exceptions were acid-neutralizing capacity, ammonium, dissolved organic carbon, and sodium. Data-quality objectives were not met in 37 percent of samples analyzed for acid-neutralizing capacity, 28 percent of samples analyzed for dissolved organic carbon, and 30 percent of samples analyzed for sodium. Results indicate a positive bias for the ammonium procedure in one study and a negative bias in another. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 90 percent of the samples analyzed for calcium, chloride, magnesium, pH, potassium, and sodium. Data-quality objectives were met by 78 percent of

  10. 40 CFR 55.15 - Specific designation of corresponding onshore areas.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... corresponding onshore areas. (a) California. (1) The South Coast Air Quality Management District is designated... Air Pollution Control District is designated as the COA for the following OCS facilities: Grace, Gilda, Gail and Gina. (3) The Santa Barbara County Air Pollution Control District is designated as the COA for...

  11. 40 CFR 55.15 - Specific designation of corresponding onshore areas.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... corresponding onshore areas. (a) California. (1) The South Coast Air Quality Management District is designated... Air Pollution Control District is designated as the COA for the following OCS facilities: Grace, Gilda, Gail and Gina. (3) The Santa Barbara County Air Pollution Control District is designated as the COA for...

  12. 40 CFR 55.15 - Specific designation of corresponding onshore areas.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... corresponding onshore areas. (a) California. (1) The South Coast Air Quality Management District is designated... Air Pollution Control District is designated as the COA for the following OCS facilities: Grace, Gilda, Gail and Gina. (3) The Santa Barbara County Air Pollution Control District is designated as the COA for...

  13. 40 CFR 55.15 - Specific designation of corresponding onshore areas.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... corresponding onshore areas. (a) California. (1) The South Coast Air Quality Management District is designated... Air Pollution Control District is designated as the COA for the following OCS facilities: Grace, Gilda, Gail and Gina. (3) The Santa Barbara County Air Pollution Control District is designated as the COA for...

  14. 40 CFR 55.15 - Specific designation of corresponding onshore areas.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... corresponding onshore areas. (a) California. (1) The South Coast Air Quality Management District is designated... Air Pollution Control District is designated as the COA for the following OCS facilities: Grace, Gilda, Gail and Gina. (3) The Santa Barbara County Air Pollution Control District is designated as the COA for...

  15. 78 FR 63929 - Approval and Promulgation of Air Quality Implementation Plans; Texas; Revisions to Rules and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-25

    ... for Control of Air Pollution; Permitting of Grandfathered Facilities AGENCY: Environmental Protection... grandfathered facilities obtain specific permits which include emission control methods to achieve mandated... or contact information unless you provide it in the body of your comment. If you send an email...

  16. The NCC project: A quality management perspective

    NASA Technical Reports Server (NTRS)

    Lee, Raymond H.

    1993-01-01

    The Network Control Center (NCC) Project introduced the concept of total quality management (TQM) in mid-1990. The CSC project team established a program which focused on continuous process improvement in software development methodology and consistent deliveries of high quality software products for the NCC. The vision of the TQM program was to produce error free software. Specific goals were established to allow continuing assessment of the progress toward meeting the overall quality objectives. The total quality environment, now a part of the NCC Project culture, has become the foundation for continuous process improvement and has resulted in the consistent delivery of quality software products over the last three years.

  17. Factors controlling reservoir quality in tertiary sandstones and their significance to geopressured geothermal production

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Loucks, R.G.; Richmann, D.L.; Milliken, K.L.

    1981-01-01

    Variable intensity of diagenesis is the factor primarily responsible for contrasting regional reservoir quality of Tertiary sandstones from the upper and lower Texas coast. Detailed comparison of Frio sandstone from the Chocolate Bayou/Danbury Dome area, Brazoria County, and Vicksburg sandstones from the McAllen Ranch Field area, Hidalgo County, reveals that extent of diagenetic modification is most strongly influenced by (1) detrital mineralogy and (2) regional geothermal gradients. The regional reservoir quality of Frio sandstones from Brazoria County is far better than that characterizing Vicksburg sandstones from Hidalgo County, especially at depths suitable for geopressured geothermal energy production. However, in predictingmore » reservoir quality on a site-specific basis, locally variable factors such as relative proportions for porosity types, pore geometry as related to permeability, and local depositional environment must also be considered. Even in an area of regionally favorable reservoir quality, such local factors can significantly affect reservoir quality and, hence, the geothermal production potential of a specific sandstone unit.« less

  18. Self and friend's differing views of social anxiety disorder's effects on friendships.

    PubMed

    Rodebaugh, Thomas L; Lim, Michelle H; Fernandez, Katya C; Langer, Julia K; Weisman, Jaclyn S; Tonge, Natasha; Levinson, Cheri A; Shumaker, Erik A

    2014-11-01

    Social anxiety disorder is known to be associated with self-report of global friendship quality. However, information about specific friendships, as well as information beyond self-report, is lacking. Such information is crucial, because known biases in information processing related to social anxiety disorder render global self-ratings particularly difficult to interpret. We examined these issues focusing on diagnosed participants (n = 77) compared with community control participants (n = 63). We examined self-report regarding global (i.e., overall) friendship quality and a specific friendship's quality; in addition, we examined friend-report of that friendship's quality. Results suggested that social anxiety disorder has a negative impact on self-perception of friendship quality for a specific friendship, but that this effect is less evident as reported by the friends. Specifically, social anxiety disorder was associated with a tendency to report worse friendship quality in comparison to friend-report, particularly in participants who were younger or had less long-lasting friendships. However, friend-report did show clear differences based on diagnostic group, with friends reporting participants with social anxiety disorder to be less dominant in the friendship and less well-adjusted. Overall, the findings are consistent with results of other studies indicating that social anxiety disorder has a strong association with self-ratings of impairment, but that these ratings appear out of proportion with the report of observers (in this case, friends).

  19. Self and Friend’s Differing Views of Social Anxiety Disorder’s Effects on Friendships

    PubMed Central

    Rodebaugh, Thomas L.; Lim, Michelle H.; Fernandez, Katya C.; Langer, Julia K.; Weisman, Jaclyn S.; Tonge, Natasha; Levinson, Cheri A.; Shumaker, Erik A.

    2014-01-01

    Social anxiety disorder is known to be associated with self-report of global friendship quality. However, information about specific friendships, as well as information beyond self-report, is lacking. Such information is crucial, because known biases in information processing related to social anxiety disorder render global self-ratings particularly difficult to interpret. We examined these issues focusing on diagnosed participants (n = 77) compared with community control participants (n = 63). We examined self-report regarding global (i.e., overall) friendship quality and a specific friendship’s quality; in addition, we examined friend-report of that friendship’s quality. Results suggested that social anxiety disorder has a negative impact on self-perception of friendship quality for a specific friendship, but that this effect is less evident as reported by the friends. Specifically, social anxiety disorder was associated with a tendency to report worse friendship quality in comparison to friend-report, particularly in participants who were younger or had less long-lasting friendships. However, friend-report did show clear differences based on diagnostic group, with friends reporting participants with social anxiety disorder to be less dominant in the friendship and less well-adjusted. Overall, the findings are consistent with results of other studies indicating that social anxiety disorder has a strong association with self-ratings of impairment, but that these ratings appear out of proportion with the report of observers (in this case, friends). PMID:25314261

  20. Microstructural Influence on Mechanical Properties in Plasma Microwelding of Ti6Al4V Alloy

    NASA Astrophysics Data System (ADS)

    Baruah, M.; Bag, S.

    2016-11-01

    The complexity of joining Ti6Al4V alloy enhances with reduction in sheet thickness. The present work puts emphasis on microplasma arc welding (MPAW) of 500-μm-thick Ti6Al4V alloy in butt joint configuration. Using controlled and regulated arc current, the MPAW process is specifically designed to use in joining of thin sheet components over a wide range of process parameters. The weld quality is assessed by carefully controlling the process parameters and by reducing the formation of oxides. The combined effect of welding speed and current on the weld joint properties is evaluated for joining of Ti6Al4V alloy. The macro- and microstructural characterizations of the weldment by optical microscopy as well as the analysis of mechanical properties by microtensile and microhardness test have been performed. The weld joint quality is affected by specifically designed fixture that controls the oxidation of the joint and introduces high cooling rate. Hence, the solidified microstructure of welded specimen influences the mechanical properties of the joint. The butt joint of titanium alloy by MPAW at optimal process parameters is of very high quality, without any internal defects and with minimum residual distortion.

  1. Congruence between Polysomnography Obstructive Sleep Apnea and the Pediatric Sleep Questionnaire: Fatigue and Health-Related Quality of Life in Juvenile Idiopathic Arthritis

    PubMed Central

    Ward, Teresa M.; Chen, Maida Lynn; Landis, Carol A.; Ringold, Sarah; Beebe, Dean W.; Pike, Kenneth C.; Wallace, Carol A.

    2016-01-01

    Purpose To examine the congruence between polysomnography obstructive apnea hypopnea index (OAHI) and parent reported obstructive sleep apnea (OSA) symptoms in 6-to-11 year-old children with juvenile idiopathic arthritis (JIA) and controls; and to compare fatigue and quality of life in JIA and control children based on OAHI and OSA symptoms. Methods Sixty-eight children with JIA and 75 controls and a parent participated. Children underwent one night of polysomnography in a sleep laboratory. Parents completed the sleep-related breathing disorders scale - Pediatric Sleep Questionnaire (PSQ), and both children and parents completed the Pediatric Quality of Life Generic Core Scale and the Multidimensional Fatigue scale. Results In JIA, 86% who met the OAHI clinical criteria for OSA (≥ 1.5) were above the PSQ OSA symptom cut-off score with a sensitivity of 0.86 and a specificity of 0.28. In the control group, 63% who met the OAHI clinical criteria for OSA, were above the PSQ OSA symptom cut-off score, with a sensitivity of 0.63 and a specificity of 0.42. All children above both the clinical criteria for OAHI and OSA symptom cut-off score had the most impaired quality of life and greater fatigue compared to those below both the clinical criteria for OAHI and the OSA symptom cut-off score. Conclusion Children who meet clinical criteria for OSA and also scored high on a parent reported screening tool for OSA symptoms had the most impaired quality of life and more fatigue. The PSQ has potential to identify children at risk for OSA. PMID:27987106

  2. Estimation of contribution ratios of pollutant sources to a specific section based on an enhanced water quality model.

    PubMed

    Cao, Bibo; Li, Chuan; Liu, Yan; Zhao, Yue; Sha, Jian; Wang, Yuqiu

    2015-05-01

    Because water quality monitoring sections or sites could reflect the water quality status of rivers, surface water quality management based on water quality monitoring sections or sites would be effective. For the purpose of improving water quality of rivers, quantifying the contribution ratios of pollutant resources to a specific section is necessary. Because physical and chemical processes of nutrient pollutants are complex in water bodies, it is difficult to quantitatively compute the contribution ratios. However, water quality models have proved to be effective tools to estimate surface water quality. In this project, an enhanced QUAL2Kw model with an added module was applied to the Xin'anjiang Watershed, to obtain water quality information along the river and to assess the contribution ratios of each pollutant source to a certain section (the Jiekou state-controlled section). Model validation indicated that the results were reliable. Then, contribution ratios were analyzed through the added module. Results show that among the pollutant sources, the Lianjiang tributary contributes the largest part of total nitrogen (50.43%), total phosphorus (45.60%), ammonia nitrogen (32.90%), nitrate (nitrite + nitrate) nitrogen (47.73%), and organic nitrogen (37.87%). Furthermore, contribution ratios in different reaches varied along the river. Compared with pollutant loads ratios of different sources in the watershed, an analysis of contribution ratios of pollutant sources for each specific section, which takes the localized chemical and physical processes into consideration, was more suitable for local-regional water quality management. In summary, this method of analyzing the contribution ratios of pollutant sources to a specific section based on the QUAL2Kw model was found to support the improvement of the local environment.

  3. 75 FR 42346 - Approval and Promulgation of Air Quality Implementation Plans; Colorado; Attainment Demonstration...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-21

    ... Demonstration F. Weight of Evidence G. Specific OAP Language H. SIP Control Measures I. Transportation... disagree; suggest alternatives and substitute language for your requested changes. Describe any assumptions.... Specific OAP Language We are proposing to disapprove the last paragraph on page IV-1 and the first...

  4. Army position on lithium battery safety

    NASA Technical Reports Server (NTRS)

    Reiss, E.

    1982-01-01

    User requirements for lithium sulfur batteries are presented. They include careful analysis of design and quality control, along with certain equipment specifications. Some of the specifications include: hermetically sealed cells; lithium limited cells with stoichiometry of lithium to sulfur dioxide as a ratio of one; low moisture content in the cells; and battery capacity.

  5. 49 CFR 178.273 - Approval of Specification UN portable tanks.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... including, but not limited to, ensuring that the quality control, design calculations and required tests are... necessary to ensure that the design meets the relevant specification. (ii) The manufacturer's serial number that will be assigned to each portable tank. (iii) A statement as to whether the design type has been...

  6. 49 CFR 178.273 - Approval of Specification UN portable tanks.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... including, but not limited to, ensuring that the quality control, design calculations and required tests are... necessary to ensure that the design meets the relevant specification. (ii) The manufacturer's serial number that will be assigned to each portable tank. (iii) A statement as to whether the design type has been...

  7. 49 CFR 178.273 - Approval of Specification UN portable tanks.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... including, but not limited to, ensuring that the quality control, design calculations and required tests are... necessary to ensure that the design meets the relevant specification. (ii) The manufacturer's serial number that will be assigned to each portable tank. (iii) A statement as to whether the design type has been...

  8. 49 CFR 178.273 - Approval of Specification UN portable tanks.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... including, but not limited to, ensuring that the quality control, design calculations and required tests are... necessary to ensure that the design meets the relevant specification. (ii) The manufacturer's serial number that will be assigned to each portable tank. (iii) A statement as to whether the design type has been...

  9. 49 CFR 178.273 - Approval of Specification UN portable tanks.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... including, but not limited to, ensuring that the quality control, design calculations and required tests are... necessary to ensure that the design meets the relevant specification. (ii) The manufacturer's serial number that will be assigned to each portable tank. (iii) A statement as to whether the design type has been...

  10. [Quality of documentation of intraoperative and postoperative complications : improvement of documentation for a nationwide quality assurance program and comparison with routine data].

    PubMed

    Jakob, J; Marenda, D; Sold, M; Schlüter, M; Post, S; Kienle, P

    2014-08-01

    Complications after cholecystectomy are continuously documented in a nationwide database in Germany. Recent studies demonstrated a lack of reliability of these data. The aim of the study was to evaluate the impact of a control algorithm on documentation quality and the use of routine diagnosis coding as an additional validation instrument. Completeness and correctness of the documentation of complications after cholecystectomy was compared over a time interval of 12 months before and after implementation of an algorithm for faster and more accurate documentation. Furthermore, the coding of all diagnoses was screened to identify intraoperative and postoperative complications. The sensitivity of the documentation for complications improved from 46 % to 70 % (p = 0.05, specificity 98 % in both time intervals). A prolonged time interval of more than 6 weeks between patient discharge and documentation was associated with inferior data quality (incorrect documentation in 1.5 % versus 15 %, p < 0.05). The rate of case documentation within the 6 weeks after hospital discharge was clearly improved after implementation of the control algorithm. Sensitivity and specificity of screening for complications by evaluating routine diagnoses coding were 70 % and 85 %, respectively. The quality of documentation was improved by implementation of a simple memory algorithm.

  11. Quality specification in haematology: the automated blood cell count.

    PubMed

    Buttarello, Mauro

    2004-08-02

    Quality specifications for automated blood cell counts include topics that go beyond the traditional analytic stage (imprecision, inaccuracy, quality control) and extend to pre- and post-analytic phases. In this review pre-analytic aspects concerning the choice of anticoagulants, maximum conservation times and differences between storage at room temperature or at 4 degrees C are considered. For the analytic phase, goals for imprecision and bias obtained with various approaches (ratio to biologic variation, state of the art, specific clinical situations) are evaluated. For the post-analytic phase, medical review criteria (algorithm, decision limit and delta check) and the structure of the report (general part and comments), which constitutes the formal act through which a laboratory communicates with clinicians, are considered. K2EDTA is considered the anticoagulant of choice for automated cell counts. Regarding storage, specimens should be analyzed as soon as possible. Storage at 4 degrees C may stabilize specimens from 24 to 72 h when complete blood count (CBC) and differential leucocyte count (DLC) is performed. For precision, analytical goals based on the state of the art are acceptable while for bias this is satisfactory only for some parameters. In haematology quality specifications for pre- and analytical phases are important, but the review criteria and the quality of the report play a central role in assuring a definite clinical value.

  12. Neural networks with fuzzy Petri nets for modeling a machining process

    NASA Astrophysics Data System (ADS)

    Hanna, Moheb M.

    1998-03-01

    The paper presents an intelligent architecture based a feedforward neural network with fuzzy Petri nets for modeling product quality in a CNC machining center. It discusses how the proposed architecture can be used for modeling, monitoring and control a product quality specification such as surface roughness. The surface roughness represents the output quality specification manufactured by a CNC machining center as a result of a milling process. The neural network approach employed the selected input parameters which defined by the machine operator via the CNC code. The fuzzy Petri nets approach utilized the exact input milling parameters, such as spindle speed, feed rate, tool diameter and coolant (off/on), which can be obtained via the machine or sensors system. An aim of the proposed architecture is to model the demanded quality of surface roughness as high, medium or low.

  13. A cost-constrained model of strategic service quality emphasis in nursing homes.

    PubMed

    Davis, M A; Provan, K G

    1996-02-01

    This study employed structural equation modeling to test the relationship between three aspects of the environmental context of nursing homes; Medicaid dependence, ownership status, and market demand, and two basic strategic orientations: low cost and differentiation based on service quality emphasis. Hypotheses were proposed and tested against data collected from a sample of nursing homes operating in a single state. Because of the overwhelming importance of cost control in the nursing home industry, a cost constrained strategy perspective was supported. Specifically, while the three contextual variables had no direct effect on service quality emphasis, the entire model was supported when cost control orientation was introduced as a mediating variable.

  14. Real-time PCR for type-specific identification of herpes simplex in clinical samples: evaluation of type-specific results in the context of CNS diseases.

    PubMed

    Meylan, Sylvain; Robert, Daniel; Estrade, Christine; Grimbuehler, Valérie; Péter, Olivier; Meylan, Pascal R; Sahli, Roland

    2008-02-01

    HSV-1 and HSV-2 cause CNS infections of dissimilar clinico-pathological characteristics with prognostic and therapeutic implications. To validate a type-specific real-time PCR that uses MGB/LNA Taqman probes and to review the virologico-clinical data of 25 eligible patients with non-neonatal CNS infections. This real-time PCR was evaluated against conventional PCR (26 CSF and 20 quality controls), and LightCycler assay (51 mucocutaneous, 8 CSF and 32 quality controls) and culture/immunofluorescence (75 mucocutaneous) to assess typing with independent methods. Taqman real-time PCR detected 240 HSV genomes per ml CSF, a level appropriate for the management of patients, and provided unambiguous typing for the 104 positive (62 HSV-1 and 42 HSV-2) out the 160 independent clinical samples tested. HSV type diagnosed by Taqman real-time PCR predicted final diagnosis (meningitis versus encephalitis/meningoencephalitis, p<0.001) in 24/25 patients at time of presentation, in contrast to clinical evaluation. Our real-time PCR, as a sensitive and specific means for type-specific HSV diagnosis, provided rapid prognostic information for patient management.

  15. Flexible Lifestyles for Youth (FL3X) behavioural intervention for at-risk adolescents with Type 1 diabetes: a randomized pilot and feasibility trial

    PubMed Central

    Mayer-Davis, E. J.; Seid, M.; Crandell, J.; Dolan, L.; Lagarde, W. H.; Letourneau, L.; Maahs, D. M.; Marcovina, S.; Nachreiner, J.; Standiford, D.; Thomas, J.; Wysocki, T.

    2014-01-01

    Aim To determine the potential effect sizes for the Flexible Lifestyle for Youth (FL3X) behavioural intervention to improve glycaemic control (HbA1c) and quality of life for at-risk adolescents with Type 1 diabetes. Methods Participants [n=61; age 12–16 years, HbA1c 64–119 mmol/mol (8–13%)] were randomized to FL3X (minimum three sessions) or usual care. Effect sizes (Cohen’s d), comparing the mean difference between the groups, were calculated. Results Study retention (95%), attendance at intervention sessions (87% attended all three sessions) and acceptability were high (100% of the adolescents and 91% of parents would recommend the programme to others). Overall, 41% of participants in the intervention group and 24% of participants in the control group were ‘responders’ [HbA1c decreased by > 6 mmol/mol (0.5%); d=0.37]. HbA1c levels decreased (d= −0.18), diabetes-specific quality of life increased (d=0.29), but generic quality of life decreased (d= −0.23) in the intervention compared with the control group. Conclusions The FL3X programme merits further study for improving HbA1c and diabetes-specific quality of life in adolescents with Type 1 diabetes. PMID:25424501

  16. Parenting children with diabetes: exploring parenting styles on children living with type 1 diabetes mellitus.

    PubMed

    Sherifali, Diana; Ciliska, Donna; O'Mara, Linda

    2009-01-01

    The purpose of this study was to examine the extent to which parenting styles is associated with diabetes control in children (aged 5-12 years) with type 1 diabetes, and on child and parent quality of life. Data were collected from a total of 216 parent and child dyads, from 4 pediatric diabetes clinics in southern Ontario, using a cross-sectional survey methodology. Each parent and child independently completed the questionnaires. The study instruments included the Parenting Dimensions Inventory, Pediatric Quality of Life (diabetes specific), and chart reviews for glycosylated hemoglobin (A1C) levels. The results of the study demonstrated that parenting styles were not correlated with diabetes control and were weakly correlated with quality of life. Most parents reported behaviors of authoritative or democratic parenting. The mean glycosylated hemoglobin (A1C) for children in the study was slightly above optimal target range, at 8.4%. Parental education had a weak negative correlation with diabetes control. Parenting styles are not associated with diabetes control and quality of life in children with type 1 diabetes. However, further research should assess the impact of the determinants of parenting on children with type 1 diabetes and quality of life.

  17. Demand controlled ventilating systems: Sensor market survey. Energy conservation in buildings and community systems programme, annex 18, December 1991

    NASA Astrophysics Data System (ADS)

    Raatschen, W.; Sjoegren, M.

    The subject of indoor and outdoor air quality has generated a great deal of attention in many countries. Areas of concern include outgassing of building materials as well as occupant-generated pollutants such as carbon dioxide, moisture, and odors. Progress has also been made towards addressing issues relating to the air tightness of the building envelope. Indoor air quality studies indicate that better control of supply flow rates as well as the air distribution pattern within buildings are necessary. One method of maintaining good indoor air quality without extensive energy consumption is to control the ventilation rate according to the needs and demands of the occupants, or to preserve the building envelope. This is accomplished through the use of demand controlled ventilating (DCV) systems. The specific objective of Annex 18 is to develop guidelines for demand controlled ventilating systems based on state of the art analyses, case studies on ventilation effectiveness, and proposed ventilation rates for different users in domestic, office, and school buildings.

  18. Integrated Application of Quality-by-Design Principles to Drug Product Development: A Case Study of Brivanib Alaninate Film-Coated Tablets.

    PubMed

    Badawy, Sherif I F; Narang, Ajit S; LaMarche, Keirnan R; Subramanian, Ganeshkumar A; Varia, Sailesh A; Lin, Judy; Stevens, Tim; Shah, Pankaj A

    2016-01-01

    Modern drug product development is expected to follow quality-by-design (QbD) paradigm. At the same time, although there are several issue-specific examples in the literature that demonstrate the application of QbD principles, a holistic demonstration of the application of QbD principles to drug product development and control strategy, is lacking. This article provides an integrated case study on the systematic application of QbD to product development and demonstrates the implementation of QbD concepts in the different aspects of product and process design for brivanib alaninate film-coated tablets. Using a risk-based approach, the strategy for development entailed identification of product critical quality attributes (CQAs), assessment of risks to the CQAs, and performing experiments to understand and mitigate identified risks. Quality risk assessments and design of experiments were performed to understand the quality of the input raw materials required for a robust formulation and the impact of manufacturing process parameters on CQAs. In addition to the material property and process parameter controls, the proposed control strategy includes use of process analytical technology and conventional analytical tests to control in-process material attributes and ensure quality of the final product. Copyright © 2016. Published by Elsevier Inc.

  19. Can We Control Contaminant Transport In Hydrologic Networks? Application Of Control Theory Concepts To Watershed Management

    NASA Astrophysics Data System (ADS)

    Yeghiazarian, L.; Riasi, M. S.

    2016-12-01

    Although controlling the level of contamination everywhere in the surface water network may not be feasible, it is vital to maintain safe water quality levels in specific areas, e.g. recreational waters. The question then is "what is the most efficient way to fully/partially control water quality in surface water networks?". This can be posed as a control problem where the goal is to efficiently drive the system to a desired state by manipulating few input variables. Such problems reduce to (1) finding the best control locations in the network to influence the state of the system; and (2) choosing the time-variant inputs at the control locations to achieve the desired state of the system with minimum effort. We demonstrate that the optimal solution to control the level of contamination in the network can be found through application of control theory concepts to transport in dendritic surface water networks.

  20. Specificity of homework compliance effects on treatment outcome in CBT: evidence from a controlled trial on panic disorder and agoraphobia.

    PubMed

    Cammin-Nowak, Sandra; Helbig-Lang, Sylvia; Lang, Thomas; Gloster, Andrew T; Fehm, Lydia; Gerlach, Alexander L; Ströhle, Andreas; Deckert, Jürgen; Kircher, Tilo; Hamm, Alfons O; Alpers, Georg W; Arolt, Volker; Wittchen, H-U

    2013-06-01

    Although homework assignments are an integral component of cognitive-behavioral therapy (CBT) and relate to positive therapy outcomes, it is unclear whether specific homework types and their completion have specific effects on outcome. Data from N = 292 patients (75% female, mean age 36 years) with panic disorder and agoraphobia and treated with standardized CBT were analyzed with homework compliance quality and quantity for different types of homework serving as predictors for different outcome variables. Quality ratings of homework completion were stronger outcome predictors than quantitative compliance ratings. Exposure homework was a better outcome predictor than homework relating to psychoeducation and self-monitoring. Different aspects of homework compliance and specific homework types might differentially relate to CBT outcome. © 2013 Wiley Periodicals, Inc.

  1. Patient-Reported Outcome Measures in Individuals With Chronic Ankle Instability: A Systematic Review

    PubMed Central

    Houston, Megan N.; Hoch, Johanna M.; Hoch, Matthew C.

    2015-01-01

    Context  A comprehensive systematic literature review of the health-related quality-of-life (HRQOL) differences among individuals with chronic ankle instability (CAI), ankle-sprain copers, and healthy control participants has not been conducted. It could provide a better indication of the self-reported deficits that may be present in individuals with CAI. Objective  To systematically summarize the extent to which HRQOL deficits are present in individuals with CAI. Data Sources  We searched for articles in the electronic databases of EBSCO Host and PubMed Central using key words chronic, functional, mechanical, coper, instability, sprains, and patient-assessed. We also performed a hand search of reference lists, authors, and patient-reported outcomes (PROs) of the articles screened for inclusion. Study Selection  Studies were included if they (1) incorporated a PRO as a participant descriptor or as a study outcome to compare adults with CAI to ankle-sprain copers or healthy controls, (2) were written in English, and (3) were published in peer-reviewed journals. Data Extraction  Two authors independently assessed methodologic quality using the modified Downs and Black Index. Articles were filtered into 3 categories based on between-groups comparisons: CAI and copers, CAI and healthy control participants, copers and healthy participants. We calculated Hedges g effect sizes and 95% confidence intervals to examine PRO group differences. Data Synthesis  Of the 124 studies assessed for eligibility, 27 were included. A total of 24 articles compared PROs in individuals with CAI and healthy controls, 7 compared individuals with CAI and copers, and 4 compared copers and healthy controls. Quality scores on the modified Downs and Black Index ranged from 52.9% to 88.2%, with 8 high-, 16 moderate-, and 3 low-quality studies. Overall, we observed moderate to strong evidence that individuals with CAI displayed deficits on generic and region-specific PROs compared with copers and healthy controls. However, evidence that differences exist between copers and healthy controls was conflicting. In addition, for dimension-specific outcomes, evidence to suggest that fear of reinjury is heightened in individuals with CAI was limited. Conclusions  The evidence suggested that CAI is associated with functional and HRQOL deficits, particularly when examined with region-specific PROs. However, PROs do not appear to differ between copers and healthy controls. PMID:26332028

  2. 40 CFR Appendix B to Part 75 - Quality Assurance and Quality Control Procedures

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... in section 2.3 of this appendix and the Hg emission tests described in §§ 75.81(c) and 75.81(d)(4). 1.2Specific Requirements for Continuous Emissions Monitoring Systems 1.2.1Calibration Error Test and Linearity Check Procedures Keep a written record of the procedures used for daily calibration error tests and...

  3. Methods of increasing the performance of radionuclide generators used in nuclear medicine: daughter nuclide build-up optimisation, elution-purification-concentration integration, and effective control of radionuclidic purity.

    PubMed

    Le, Van So; Do, Zoe Phuc-Hien; Le, Minh Khoi; Le, Vicki; Le, Natalie Nha-Truc

    2014-06-10

    Methods of increasing the performance of radionuclide generators used in nuclear medicine radiotherapy and SPECT/PET imaging were developed and detailed for 99Mo/99mTc and 68Ge/68Ga radionuclide generators as the cases. Optimisation methods of the daughter nuclide build-up versus stand-by time and/or specific activity using mean progress functions were developed for increasing the performance of radionuclide generators. As a result of this optimisation, the separation of the daughter nuclide from its parent one should be performed at a defined optimal time to avoid the deterioration in specific activity of the daughter nuclide and wasting stand-by time of the generator, while the daughter nuclide yield is maintained to a reasonably high extent. A new characteristic parameter of the formation-decay kinetics of parent/daughter nuclide system was found and effectively used in the practice of the generator production and utilisation. A method of "early elution schedule" was also developed for increasing the daughter nuclide production yield and specific radioactivity, thus saving the cost of the generator and improving the quality of the daughter radionuclide solution. These newly developed optimisation methods in combination with an integrated elution-purification-concentration system of radionuclide generators recently developed is the most suitable way to operate the generator effectively on the basis of economic use and improvement of purposely suitable quality and specific activity of the produced daughter radionuclides. All these features benefit the economic use of the generator, the improved quality of labelling/scan, and the lowered cost of nuclear medicine procedure. Besides, a new method of quality control protocol set-up for post-delivery test of radionuclidic purity has been developed based on the relationship between gamma ray spectrometric detection limit, required limit of impure radionuclide activity and its measurement certainty with respect to optimising decay/measurement time and product sample activity used for QC quality control. The optimisation ensures a certainty of measurement of the specific impure radionuclide and avoids wasting the useful amount of valuable purified/concentrated daughter nuclide product. This process is important for the spectrometric measurement of very low activity of impure radionuclide contamination in the radioisotope products of much higher activity used in medical imaging and targeted radiotherapy.

  4. Lessons Learned on Quality (of) Standards

    NASA Astrophysics Data System (ADS)

    Gerlich, Rainer; Gerlich, Ralf

    2011-08-01

    Standards are used to describe and ensure the quality of products, services and processes throughout almost all branches of industry, including the field of software engineering. Contractors and suppliers are obligated by their customers and certification authorities to follow a certain set of standards during development. For example, a customer can easier actively participate in and control the contractor's process when enforcing a standard process..However, as with any requirement, a standard may also impede the contractor or supplier in assuring actual quality of the product in the sense of fitness for the purpose intended by the customer.This is the case when a standard defines specific quality assurance activities requiring a considerable amount of effort while other more efficient but equivalent or even superior approaches are blocked. Then improvement of the ratio between cost and quality exceeding miniscule advances is heavily impeded.While in some parts being too specific in defining the mechanisms of the enforced process, standards are sometimes too weak in defining the principles or goals on control of product quality.Therefore this paper addresses the following issues: (1) Which conclusions can be drawn on the quality and efficiency of a standard? (2) If and how is it possible to improve or evolve a standard? (3) How well does a standard guide a user towards high quality of the end product?One conclusion is that the analyzed standards do interfere with technological innovation, though the standards leave a lot of freedom for concretization and are understood as technology-independent.Another conclusion is that standards are not only a matter of quality but also a matter of competitiveness of the industry depending on resulting costs and time-to- market. When the costs induced by a standard are not adequate to the achievable quality, industry encounters a significant disadvantage.

  5. Identification of milling and baking quality QTL in multiple soft wheat mapping populations.

    PubMed

    Cabrera, Antonio; Guttieri, Mary; Smith, Nathan; Souza, Edward; Sturbaum, Anne; Hua, Duc; Griffey, Carl; Barnett, Marla; Murphy, Paul; Ohm, Herb; Uphaus, Jim; Sorrells, Mark; Heffner, Elliot; Brown-Guedira, Gina; Van Sanford, David; Sneller, Clay

    2015-11-01

    Two mapping approaches were use to identify and validate milling and baking quality QTL in soft wheat. Two LG were consistently found important for multiple traits and we recommend the use marker-assisted selection on specific markers reported here. Wheat-derived food products require a range of characteristics. Identification and understanding of the genetic components controlling end-use quality of wheat is important for crop improvement. We assessed the underlying genetics controlling specific milling and baking quality parameters of soft wheat including flour yield, softness equivalent, flour protein, sucrose, sodium carbonate, water absorption and lactic acid, solvent retention capacities in a diversity panel and five bi-parental mapping populations. The populations were genotyped with SSR and DArT markers, with markers specific for the 1BL.1RS translocation and sucrose synthase gene. Association analysis and composite interval mapping were performed to identify quantitative trait loci (QTL). High heritability was observed for each of the traits evaluated, trait correlations were consistent over populations, and transgressive segregants were common in all bi-parental populations. A total of 26 regions were identified as potential QTL in the diversity panel and 74 QTL were identified across all five bi-parental mapping populations. Collinearity of QTL from chromosomes 1B and 2B was observed across mapping populations and was consistent with results from the association analysis in the diversity panel. Multiple regression analysis showed the importance of the two 1B and 2B regions and marker-assisted selection for the favorable alleles at these regions should improve quality.

  6. National surveys on internal quality control for blood gas analysis and related electrolytes in clinical laboratories of China.

    PubMed

    Duan, Min; Wang, Wei; Zhao, Haijian; Zhang, Chuanbao; He, Falin; Zhong, Kun; Yuan, Shuai; Wang, Zhiguo

    2018-05-01

    Internal quality control (IQC) is essential for precision evaluation and continuous quality improvement. This study aims to investigate the IQC status of blood gas analysis (BGA) in clinical laboratories of China from 2014 to 2017. IQC information on BGA (including pH, pCO2, pO2, Na+, K+, Ca2+, Cl-) was submitted by external quality assessment (EQA) participant laboratories and collected through Clinet-EQA reporting system in March from 2014 to 2017. First, current CVs were compared among different years and measurement systems. Then, percentages of laboratories meeting five allowable imprecision specifications for each analyte were calculated, respectively. Finally, laboratories were divided into different groups based on control rules and frequency to compare their variation trend. The current CVs of BGA were significantly decreasing from 2014 to 2017. pH and pCO2 got the highest pass rates when compared with the minimum imprecision specification, whereas pO2, Na+, K+, Ca2+, Cl- got the highest pass rates when 1/3 TEa imprecision specification applied. The pass rates of pH, pO2, Na+, K+, Ca2+, Cl- were significantly increasing during the 4 years. The comparisons of current CVs among different measurement systems showed that the precision performance of different analytes among different measurement systems had no regular distribution from 2014 to 2017. The analysis of IQC practice indicated great progress and improvement among different years. The imprecision performance of BGA has improved from 2014 to 2017, but the status of imprecision performance in China remains unsatisfying. Therefore, further investigation and continuous improvement measures should be taken.

  7. Multileaf collimator performance monitoring and improvement using semiautomated quality control testing and statistical process control.

    PubMed

    Létourneau, Daniel; Wang, An; Amin, Md Nurul; Pearce, Jim; McNiven, Andrea; Keller, Harald; Norrlinger, Bernhard; Jaffray, David A

    2014-12-01

    High-quality radiation therapy using highly conformal dose distributions and image-guided techniques requires optimum machine delivery performance. In this work, a monitoring system for multileaf collimator (MLC) performance, integrating semiautomated MLC quality control (QC) tests and statistical process control tools, was developed. The MLC performance monitoring system was used for almost a year on two commercially available MLC models. Control charts were used to establish MLC performance and assess test frequency required to achieve a given level of performance. MLC-related interlocks and servicing events were recorded during the monitoring period and were investigated as indicators of MLC performance variations. The QC test developed as part of the MLC performance monitoring system uses 2D megavoltage images (acquired using an electronic portal imaging device) of 23 fields to determine the location of the leaves with respect to the radiation isocenter. The precision of the MLC performance monitoring QC test and the MLC itself was assessed by detecting the MLC leaf positions on 127 megavoltage images of a static field. After initial calibration, the MLC performance monitoring QC test was performed 3-4 times/week over a period of 10-11 months to monitor positional accuracy of individual leaves for two different MLC models. Analysis of test results was performed using individuals control charts per leaf with control limits computed based on the measurements as well as two sets of specifications of ± 0.5 and ± 1 mm. Out-of-specification and out-of-control leaves were automatically flagged by the monitoring system and reviewed monthly by physicists. MLC-related interlocks reported by the linear accelerator and servicing events were recorded to help identify potential causes of nonrandom MLC leaf positioning variations. The precision of the MLC performance monitoring QC test and the MLC itself was within ± 0.22 mm for most MLC leaves and the majority of the apparent leaf motion was attributed to beam spot displacements between irradiations. The MLC QC test was performed 193 and 162 times over the monitoring period for the studied units and recalibration had to be repeated up to three times on one of these units. For both units, rate of MLC interlocks was moderately associated with MLC servicing events. The strongest association with the MLC performance was observed between the MLC servicing events and the total number of out-of-control leaves. The average elapsed time for which the number of out-of-specification or out-of-control leaves was within a given performance threshold was computed and used to assess adequacy of MLC test frequency. A MLC performance monitoring system has been developed and implemented to acquire high-quality QC data at high frequency. This is enabled by the relatively short acquisition time for the images and automatic image analysis. The monitoring system was also used to record and track the rate of MLC-related interlocks and servicing events. MLC performances for two commercially available MLC models have been assessed and the results support monthly test frequency for widely accepted ± 1 mm specifications. Higher QC test frequency is however required to maintain tighter specification and in-control behavior.

  8. [Application progress on near infrared spectroscopy in quality control and process monitoring of traditional Chinese medicine].

    PubMed

    Li, Wenlong; Qu, Haibin

    2017-01-25

    The industry of traditional Chinese medicine (TCM) encounters problems like quality fluctuation of raw materials and unstandardized production process. Near infrared (NIR) spectroscopy technology is widely used in quality control of TCM because of its abundant information, fast and nondestructive characters. The main applications include quantitative analysis of Chinese medicinal materials, intermediates and Chinese patent medicines; the authenticity of TCM, species, origins and manufacturers; monitoring and control of the extraction, alcohol precipitation, column chromatography and blending process. This article reviews the progress on the application of NIR spectroscopy technology in TCM field. In view of the problems existing in the application, the article proposes that the standardization of NIR analysis method should be developed according to specific characteristics of TCM, which will promote the application of NIR technology in the TCM industry.

  9. Effect of home care service on the quality of life in patients with gynecological cancer.

    PubMed

    Aktas, Demet; Terzioglu, Fusun

    2015-01-01

    The purpose of the research was to determine the effect of home care service on the quality of life in patients with gynecological cancer. This randomized case control study was carried out in a womans hospital between September 2011 and February 2012. Women undergoing gynecological cancer treatment were separated into intervention and control groups, of 35 patients each. The intervention group was provided with nursing care service through hospital and home visits (1st, 12th weeks) within the framework of a specifically developed nursing care plan. The control group was monitored without any intervention through the hospital routine protocols (1st, 12th weeks). Data were collected using An Interview Form, Home Visit Monitoring Form and Quality of Life Scale/Cancer Survivors. Effects of home care service on the quality of life in gynecological cancer patients were investigated using chi-square tests, McNemar's test, independent t-test and ANOVA. This study found that the intervention group receiving home care service had a moderately high quality of life (average mean: 6.01±0.64), while the control group had comparatively lower quality (average mean: 4.35±0.79) within the 12 week post- discharge period (p<0.05). This study found home care services to be efficient in improving the quality of life in patients with gynecological cancer.

  10. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Malkoske, Kyle; Nielsen, Michelle; Brown, Erika

    The Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist’s (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) have worked together in the development of a suite of Technical Quality Control (TQC) Guidelines for radiation treatment equipment and technologies, that outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. Early community engagement and uptake survey data showed 70% of Canadian centers are part of this process and that the data in the guideline documents reflect, and are influencing the way Canadian radiation treatmentmore » centres run their technical quality control programs. As the TQC development framework matured as a cross-country initiative, guidance documents have been developed in many clinical technologies. Recently, there have been new TQC documents initiated for Gamma Knife and Cyberknife technologies where the entire communities within Canada are involved in the review process. At the same time, QARSAC reviewed the suite as a whole for the first time and it was found that some tests and tolerances overlapped across multiple documents as single tests could pertain to multiple quality control areas. The work to streamline the entire suite has allowed for improved usability of the suite while keeping the integrity of single quality control areas. The suite will be published by the JACMP, in the coming year.« less

  11. A novel cell line generated using the CRISPR/Cas9 technology as universal quality control material for KRAS G12V mutation testing.

    PubMed

    Jia, Shiyu; Zhang, Rui; Lin, Guigao; Peng, Rongxue; Gao, Peng; Han, Yanxi; Fu, Yu; Ding, Jiansheng; Wu, Qisheng; Zhang, Kuo; Xie, Jiehong; Li, Jinming

    2018-06-01

    KRAS mutations are the key indicator for EGFR monoclonal antibody-targeted therapy and acquired drug resistance, and their accurate detection is critical to the clinical decision-making of colorectal cancer. However, no proper quality control material is available for the current detection methods, particularly next-generation sequencing (NGS). The ideal quality control material for NGS needs to provide both the tumor mutation gene and the matched background genomic DNA, which is uncataloged in public databases, to accurately distinguish germline polymorphisms and somatic mutations. We developed a novel KRAS G12V mutant cell line using the clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated protein 9 (Cas9) technique to make up for the deficiencies in existing quality control material and further validated the feasibility of the cell line as quality control material by amplification refractory mutation system (ARMS), Sanger sequencing, digital PCR (dPCR), and NGS. We verified that the edited cell line specifically had the G12V mutation, and the validation results presented a high consistency among the four methods of detection. The three cell lines screened contained the G12V mutation and the mutation allele fractions of G12V-1, G12V-2, and G12V-3 were 52.01%, 82.06%, and 17.29%, respectively. The novel KRAS G12V cell line generated using the CRISPR/Cas9 gene editing system is suitable as a quality control material for all current detection methods and provides a new direction in the development of quality control material. © 2018 Wiley Periodicals, Inc.

  12. Distinct Mechanisms of Pathogenic DJ-1 Mutations in Mitochondrial Quality Control

    PubMed Central

    Strobbe, Daniela; Robinson, Alexis A.; Harvey, Kirsten; Rossi, Lara; Ferraina, Caterina; de Biase, Valerio; Rodolfo, Carlo; Harvey, Robert J.; Campanella, Michelangelo

    2018-01-01

    The deglycase and chaperone protein DJ-1 is pivotal for cellular oxidative stress responses and mitochondrial quality control. Mutations in PARK7, encoding DJ-1, are associated with early-onset familial Parkinson’s disease and lead to pathological oxidative stress and/or disrupted protein degradation by the proteasome. The aim of this study was to gain insights into the pathogenic mechanisms of selected DJ-1 missense mutations, by characterizing protein–protein interactions, core parameters of mitochondrial function, quality control regulation via autophagy, and cellular death following dopamine accumulation. We report that the DJ-1M26I mutant influences DJ-1 interactions with SUMO-1, in turn enhancing removal of mitochondria and conferring increased cellular susceptibility to dopamine toxicity. By contrast, the DJ-1D149A mutant does not influence mitophagy, but instead impairs Ca2+ dynamics and free radical homeostasis by disrupting DJ-1 interactions with a mitochondrial accessory protein known as DJ-1-binding protein (DJBP/EFCAB6). Thus, individual DJ-1 mutations have different effects on mitochondrial function and quality control, implying mutation-specific pathomechanisms converging on impaired mitochondrial homeostasis. PMID:29599708

  13. Quality Assurance Specifications for Planetary Protection Assays

    NASA Astrophysics Data System (ADS)

    Baker, Amy

    As the European Space Agency planetary protection (PP) activities move forward to support the ExoMars and other planetary missions, it will become necessary to increase staffing of labo-ratories that provide analyses for these programs. Standardization of procedures, a comprehen-sive quality assurance program, and unilateral training of personnel will be necessary to ensure that the planetary protection goals and schedules are met. The PP Quality Assurance/Quality Control (QAQC) program is designed to regulate and monitor procedures performed by labora-tory personnel to ensure that all work meets data quality objectives through the assembly and launch process. Because personnel time is at a premium and sampling schedules are often de-pendent on engineering schedules, it is necessary to have flexible staffing to support all sampling requirements. The most productive approach to having a competent and flexible work force is to establish well defined laboratory procedures and training programs that clearly address the needs of the program and the work force. The quality assurance specification for planetary protection assays has to ensure that labora-tories and associated personnel can demonstrate the competence to perform assays according to the applicable standard AD4. Detailed subjects included in the presentation are as follows: • field and laboratory control criteria • data reporting • personnel training requirements and certification • laboratory audit criteria. Based upon RD2 for primary and secondary validation and RD3 for data quality objectives, the QAQC will provide traceable quality assurance safeguards by providing structured laboratory requirements for guidelines and oversight including training and technical updates, standardized documentation, standardized QA/QC checks, data review and data archiving.

  14. Statistical process control for electron beam monitoring.

    PubMed

    López-Tarjuelo, Juan; Luquero-Llopis, Naika; García-Mollá, Rafael; Quirós-Higueras, Juan David; Bouché-Babiloni, Ana; Juan-Senabre, Xavier Jordi; de Marco-Blancas, Noelia; Ferrer-Albiach, Carlos; Santos-Serra, Agustín

    2015-07-01

    To assess the electron beam monitoring statistical process control (SPC) in linear accelerator (linac) daily quality control. We present a long-term record of our measurements and evaluate which SPC-led conditions are feasible for maintaining control. We retrieved our linac beam calibration, symmetry, and flatness daily records for all electron beam energies from January 2008 to December 2013, and retrospectively studied how SPC could have been applied and which of its features could be used in the future. A set of adjustment interventions designed to maintain these parameters under control was also simulated. All phase I data was under control. The dose plots were characterized by rising trends followed by steep drops caused by our attempts to re-center the linac beam calibration. Where flatness and symmetry trends were detected they were less-well defined. The process capability ratios ranged from 1.6 to 9.3 at a 2% specification level. Simulated interventions ranged from 2% to 34% of the total number of measurement sessions. We also noted that if prospective SPC had been applied it would have met quality control specifications. SPC can be used to assess the inherent variability of our electron beam monitoring system. It can also indicate whether a process is capable of maintaining electron parameters under control with respect to established specifications by using a daily checking device, but this is not practical unless a method to establish direct feedback from the device to the linac can be devised. Copyright © 2015 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  15. Helicopter roll control effectiveness criteria program summary

    NASA Technical Reports Server (NTRS)

    Heffley, Robert K.; Bourne, Simon M.; Mnich, Marc A.

    1988-01-01

    A study of helicopter roll control effectiveness is summarized for the purpose of defining military helicopter handling qualities requirements. The study is based on an analysis of pilot-in-the-loop task performance of several basic maneuvers. This is extended by a series of piloted simulations using the NASA Ames Vertical Motion Simulator and selected flight data. The main results cover roll control power and short-term response characteristics. In general the handling qualities requirements recommended are set in conjunction with desired levels of flight task and maneuver response which can be directly observed in actual flight. An important aspect of this, however, is that vehicle handling qualities need to be set with regard to some quantitative aspect of mission performance. Specific examples of how this can be accomplished include a lateral unmask/remask maneuver in the presence of a threat and an air tracking maneuver which recognizes the kill probability enhancement connected with decreasing the range to the target. Conclusions and recommendations address not only the handling qualities recommendations, but also the general use of flight simulators and the dependence of mission performance on handling qualities.

  16. Data Quality Assurance and Control for AmeriFlux Network at CDIAC, ORNL

    NASA Astrophysics Data System (ADS)

    Shem, W.; Boden, T.; Krassovski, M.; Yang, B.

    2014-12-01

    The Carbon Dioxide Information Analysis Center (CDIAC) at the Oak Ridge National Laboratory (ORNL) serves as the long-term data repository for the AmeriFlux network. Datasets currently available include hourly or half-hourly meteorological and flux observations, biological measurement records, and synthesis data products. Currently there is a lack of standardized nomenclature and specifically designed procedures for data quality assurance/control in processing and handling micrometeorological and ecological data at individual flux sites. CDIAC's has bridged this gap by providing efficient and accurate procedures for data quality control and standardization of the results for easier assimilation by the models used in climate science. In this presentation we highlight the procedures we have put in place to scrutinize continuous flux and meteorological data within Ameriflux network. We itemize some basic data quality issues that we have observed over the past years and include some examples of typical data quality issues. Such issues, e.g., incorrect time-stamping, poor calibration or maintenance of instruments, missing or incomplete metadata and others that are commonly over-looked by PI's, invariably impact the time-series observations.

  17. WHO Expert Committee on specifications for pharmaceutical preparations.

    PubMed

    2010-01-01

    The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines. Standards are developed by the Committee through worldwide consultation and an international consensus-building process. The following new guidelines were adopted and recommended for use: good practices for pharmaceutical quality control laboratories; supplementary guidelines for active pharmaceutical ingredients; good manufacturing practices for pharmaceutical products containing hazardous substances; good manufacturing practices for sterile pharmaceutical products; good distribution practices for pharmaceutical products; guidelines on the requalification of prequalified dossiers: and guidelines for the preparation of a contract research organization master file.

  18. [Studies on HPLC fingerprint chromatogram of Folium Fici Microcarpa].

    PubMed

    Fang, Zhi-Jian; Dai, Zhen; Li, Shu-Yuan

    2008-10-01

    To establish a sensitive and specific method for quality control of Folium Fici Microcarpa, HPLC method was applied for studies on the fingerprint chromatogram of Folium Fici Microcarpa. Isovitexin was used as reference substance to evaluate the chromatogram of 10 samples from different regions and 12 samples collected in different months. The result revealed that all the chromatographic peaks were seperated efficiently. There were 17 common peaks showed in the fingerprint chromatogram. The method of fingerprint chromatogram with characteristic and specificity will be used to identify the quality and evaluate different origins and collection period of Folium Fici Microcarpa.

  19. Approaches to quality management and accreditation in a genetic testing laboratory

    PubMed Central

    Berwouts, Sarah; Morris, Michael A; Dequeker, Elisabeth

    2010-01-01

    Medical laboratories, and specifically genetic testing laboratories, provide vital medical services to different clients: clinicians requesting a test, patients from whom the sample was collected, public health and medical-legal instances, referral laboratories and authoritative bodies. All expect results that are accurate and obtained in an efficient and effective manner, within a suitable time frame and at acceptable cost. There are different ways of achieving the end results, but compliance with International Organization for Standardization (ISO) 15189, the international standard for the accreditation of medical laboratories, is becoming progressively accepted as the optimal approach to assuring quality in medical testing. We present recommendations and strategies designed to aid genetic testing laboratories with the implementation of a quality management system, including key aspects such as document control, external quality assessment, internal quality control, internal audit, management review, validation, as well as managing the human side of change. The focus is on pragmatic approaches to attain the levels of quality management and quality assurance required for accreditation according to ISO 15189, within the context of genetic testing. Attention is also given to implementing efficient and effective quality improvement. PMID:20720559

  20. Read Code Quality Assurance

    PubMed Central

    Schulz, Erich; Barrett, James W.; Price, Colin

    1998-01-01

    As controlled clinical vocabularies assume an increasing role in modern clinical information systems, so the issue of their quality demands greater attention. In order to meet the resulting stringent criteria for completeness and correctness, a quality assurance system comprising a database of more than 500 rules is being developed and applied to the Read Thesaurus. The authors discuss the requirement to apply quality assurance processes to their dynamic editing database in order to ensure the quality of exported products. Sources of errors include human, hardware, and software factors as well as new rules and transactions. The overall quality strategy includes prevention, detection, and correction of errors. The quality assurance process encompasses simple data specification, internal consistency, inspection procedures and, eventually, field testing. The quality assurance system is driven by a small number of tables and UNIX scripts, with “business rules” declared explicitly as Structured Query Language (SQL) statements. Concurrent authorship, client-server technology, and an initial failure to implement robust transaction control have all provided valuable lessons. The feedback loop for error management needs to be short. PMID:9670131

  1. Read Code quality assurance: from simple syntax to semantic stability.

    PubMed

    Schulz, E B; Barrett, J W; Price, C

    1998-01-01

    As controlled clinical vocabularies assume an increasing role in modern clinical information systems, so the issue of their quality demands greater attention. In order to meet the resulting stringent criteria for completeness and correctness, a quality assurance system comprising a database of more than 500 rules is being developed and applied to the Read Thesaurus. The authors discuss the requirement to apply quality assurance processes to their dynamic editing database in order to ensure the quality of exported products. Sources of errors include human, hardware, and software factors as well as new rules and transactions. The overall quality strategy includes prevention, detection, and correction of errors. The quality assurance process encompasses simple data specification, internal consistency, inspection procedures and, eventually, field testing. The quality assurance system is driven by a small number of tables and UNIX scripts, with "business rules" declared explicitly as Structured Query Language (SQL) statements. Concurrent authorship, client-server technology, and an initial failure to implement robust transaction control have all provided valuable lessons. The feedback loop for error management needs to be short.

  2. Design and development of polyphenylene oxide foam as a reusable internal insulation for LH2 tanks

    NASA Technical Reports Server (NTRS)

    1975-01-01

    Material specification and fabrication process procedures for foam production are presented. The properties of mechanical strength, modulus of elasticity, density and thermal conductivity were measured and related to foam quality. Properties unique to the foam such as a gas layer insulation, density gradient parallel to the fiber direction, and gas flow conductance in both directions were correlated with foam quality. Inspection and quality control tests procedures are outlined and photographs of test equipment and test specimens are shown.

  3. Computed Tomography

    NASA Astrophysics Data System (ADS)

    Castellano, Isabel; Geleijns, Jacob

    After its clinical introduction in 1973, computed tomography developed from an x-ray modality for axial imaging in neuroradiology into a versatile three dimensional imaging modality for a wide range of applications in for example oncology, vascular radiology, cardiology, traumatology and even in interventional radiology. Computed tomography is applied for diagnosis, follow-up studies and screening of healthy subpopulations with specific risk factors. This chapter provides a general introduction in computed tomography, covering a short history of computed tomography, technology, image quality, dosimetry, room shielding, quality control and quality criteria.

  4. 40 CFR 63.7535 - How do I monitor and collect data to demonstrate continuous compliance?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... activities, including, as applicable, calibration checks and required zero and span adjustments. A monitoring...-control periods, or required monitoring system quality assurance or control activities in data averages... data according to this section and the site-specific monitoring plan required by § 63.7505(d). (b) You...

  5. 40 CFR 63.7535 - How do I monitor and collect data to demonstrate continuous compliance?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... activities, including, as applicable, calibration checks and required zero and span adjustments. A monitoring...-control periods, or required monitoring system quality assurance or control activities in data averages... data according to this section and the site-specific monitoring plan required by § 63.7505(d). (b) You...

  6. Investigating the Relationship between Governance Mechanisms and the Disclosure of IT Control Weaknesses

    ERIC Educational Resources Information Center

    Hamdan, Basil

    2012-01-01

    The current research is concerned with exploring the quality of information technology (IT) control over financial reporting systems as reported under Section 404 of the Sarbanes-Oxley Act of 2002. More specifically, this dissertation examines the association between organizational governance mechanisms and the occurrence and subsequent disclosure…

  7. Quality of life of coronary artery disease patients after the implementation of planning strategies for medication adherence 1

    PubMed Central

    Lourenço, Laura Bacelar de Araujo; Rodrigues, Roberta Cunha Matheus; São-João, Thaís Moreira; Gallani, Maria Cecilia; Cornélio, Marilia Estevam

    2015-01-01

    OBJECTIVE: to compare the general and specific health-related quality of life (HRQoL) between the Intervention (IG) and Control (CG) groups of coronary artery disease patients after the implementation of Action Planning and Coping Planning strategies for medication adherence and to verify the relationship between adherence and HRQoL. METHOD: this was a controlled and randomized study. RESULTS: the sample (n=115) was randomized into two groups, IG (n=59) and CG (n=56). Measures of medication adherence and general and specific HRQoL were obtained in the baseline and after two months of monitoring. CONCLUSION: the findings showed that the combination of intervention strategies - Action Planning and Coping Planning for medication adherence did not affect the HRQoL of coronary artery disease patients in outpatient monitoring. PMID:25806626

  8. The Effects of a Mindfulness-Based Intervention on Emotional Distress, Quality of Life, and HbA1c in Outpatients With Diabetes (DiaMind)

    PubMed Central

    van Son, Jenny; Nyklíček, Ivan; Pop, Victor J.; Blonk, Marion C.; Erdtsieck, Ronald J.; Spooren, Pieter F.; Toorians, Arno W.; Pouwer, François

    2013-01-01

    OBJECTIVE Emotional distress is common in outpatients with diabetes, affecting ∼20–40% of the patients. The aim of this study was to determine the effectiveness of group therapy with Mindfulness-Based Cognitive Therapy (MBCT), relative to usual care, for patients with diabetes with regard to reducing emotional distress and improving health-related quality of life and glycemic control. RESEARCH DESIGN AND METHODS In the present randomized controlled trial, 139 outpatients with diabetes (type 1 or type 2) and low levels of emotional well-being were randomized to MBCT (n = 70) or a waiting list group (n = 69). Primary outcomes were perceived stress (Perceived Stress Scale), anxiety and depressive symptoms (Hospital Anxiety and Depression Scale), mood (Profiles of Mood States), and diabetes-specific distress (Problem Areas In Diabetes). Secondary outcomes were health-related quality of life (12-Item Short-Form Health Survey), and glycemic control (HbA1c). Assessments were conducted at baseline and at 4 and 8 weeks of follow-up. RESULTS Compared with control, MBCT was more effective in reducing stress (P < 0.001, Cohen d = 0.70), depressive symptoms (P = 0.006, d = 0.59), and anxiety (P = 0.019, d = 0.44). In addition, MBCT was more effective in improving quality of life (mental: P = 0.003, d = 0.55; physical: P = 0.032, d = 0.40). We found no significant effect on HbA1c or diabetes-specific distress, although patients with elevated diabetes distress in the MBCT group tended to show a decrease in diabetes distress (P = 0.07, d = 0.70) compared with the control group. CONCLUSIONS Compared with usual care, MBCT resulted in a reduction of emotional distress and an increase in health-related quality of life in diabetic patients who had lower levels of emotional well-being. PMID:23193218

  9. Generic and eating disorder-specific impairment in binge eating disorder with and without overvaluation of weight or shape.

    PubMed

    Harrison, Carmel; Mond, Jonathan; Rieger, Elizabeth; Rodgers, Bryan

    2015-09-01

    We sought to elucidate the nature and extent of impairment in quality of life among individuals with binge eating disorder (BED) with and without the overvaluation of weight or shape ("overvaluation"). Subgroups of women - probable BED with overvaluation (n = 102), probable BED without overvaluation (n = 72), obese individuals reporting no binge eating ("obese control", n = 40), and "normal weight" individuals reporting no binge eating ("healthy control," n = 40) - were recruited from a community-based sample in which individuals with eating disorder symptoms were over-represented. They were compared on measures of eating disorder psychopathology and generic and disease-specific measures of quality of life. Scores on these measures among individuals with BED receiving specialist treatment were also considered. Participants with BED and overvaluation had high levels of eating disorder psychopathology and impairment in both generic and disease-specific quality of life, comparable to those of BED patients receiving specialist treatment, and significantly higher than all other subgroups, whereas participants with BED in the absence of overvaluation did not differ from obese controls on any of these measures. The findings provide further evidence for the need to consider reference to overvaluation among the diagnostic criteria for BED. The relative merits of the inclusion of overvaluation as a diagnostic criterion or as a diagnostic specifier for BED warrant greater consideration. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Generic Airplane Model Concept and Four Specific Models Developed for Use in Piloted Simulation Studies

    NASA Technical Reports Server (NTRS)

    Hoffler, Keith D.; Fears, Scott P.; Carzoo, Susan W.

    1997-01-01

    A generic airplane model concept was developed to allow configurations with various agility, performance, handling qualities, and pilot vehicle interface to be generated rapidly for piloted simulation studies. The simple concept allows stick shaping and various stick command types or modes to drive an airplane with both linear and nonlinear components. Output from the stick shaping goes to linear models or a series of linear models that can represent an entire flight envelope. The generic model also has provisions for control power limitations, a nonlinear feature. Therefore, departures from controlled flight are possible. Note that only loss of control is modeled, the generic airplane does not accurately model post departure phenomenon. The model concept is presented herein, along with four example airplanes. Agility was varied across the four example airplanes without altering specific excess energy or significantly altering handling qualities. A new feedback scheme to provide angle-of-attack cueing to the pilot, while using a pitch rate command system, was implemented and tested.

  11. V/STOL Dynamics, Control, and Flying Qualities

    NASA Technical Reports Server (NTRS)

    Franklin, James A.

    2000-01-01

    This publication presents material that constituted the lectures presented by the author as part of Course AA 234, Dynamics, Control, and Flying Qualities of Vertical/Short Takeoff and Landing (V/STOL) Aircraft that was taught in the Department of Aeronautics and Astronautics at Stanford University. It covers representative operations of vertical and short takeoff and landing (V/STOL) aircraft, a discussion of the pilot's strategy in controlling these aircraft, the equations of motion pertinent to V/STOL tasks, and their application in the analysis of longitudinal and lateral-directional control in hover and forward flight. Following that development, which applies to the characteristics of the basic airframe and propulsion system, the text concludes with a discussion of the contributions of control augmentation in specific flight tasks and of the integration of modern electronic displays with these controls.

  12. Urban Stormwater Characterization, Control, and Treatment.

    PubMed

    Moore, Trisha L; Rodak, Carolyn M; Vogel, Jason R

    2017-10-01

    A summary of 246 studies published in 2016 on topics related to the characterization and management of urban stormwater runoff is presented in the following review. The review is structured along three major topical areas: (1) general characterization of stormwater quantity and quality; (2) engineered systems for stormwater control and treatment, including erosion and sediment control practices, constructed stormwater ponds and wetlands, bioretention, permeable pavement, greenroofs, and rainwater harvesting and (3) watershedscale application of stormwater treatment and control practices. Common research themes and needs highlighted throughout this review include efforts to better understand stormwater transport and treatment mechanisms and their representation in models, advancements to optimize the design of stormwater control measures to meet specific hydrologic and/or water quality targets, and increasing understanding of the biophysical and social factors that influence watershed-scale implementation of low impact development and other stormwater control measures.

  13. 21 CFR 212.70 - What controls and acceptance criteria must I have for my finished PET drug products?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... for my finished PET drug products? 212.70 Section 212.70 Food and Drugs FOOD AND DRUG ADMINISTRATION... acceptance criteria must I have for my finished PET drug products? (a) Specifications. You must establish specifications for each PET drug product, including criteria for determining identity, strength, quality, purity...

  14. 21 CFR 212.70 - What controls and acceptance criteria must I have for my finished PET drug products?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... for my finished PET drug products? 212.70 Section 212.70 Food and Drugs FOOD AND DRUG ADMINISTRATION... acceptance criteria must I have for my finished PET drug products? (a) Specifications. You must establish specifications for each PET drug product, including criteria for determining identity, strength, quality, purity...

  15. 21 CFR 212.70 - What controls and acceptance criteria must I have for my finished PET drug products?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... for my finished PET drug products? 212.70 Section 212.70 Food and Drugs FOOD AND DRUG ADMINISTRATION... acceptance criteria must I have for my finished PET drug products? (a) Specifications. You must establish specifications for each PET drug product, including criteria for determining identity, strength, quality, purity...

  16. 21 CFR 212.70 - What controls and acceptance criteria must I have for my finished PET drug products?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... for my finished PET drug products? 212.70 Section 212.70 Food and Drugs FOOD AND DRUG ADMINISTRATION... acceptance criteria must I have for my finished PET drug products? (a) Specifications. You must establish specifications for each PET drug product, including criteria for determining identity, strength, quality, purity...

  17. Back schools for non-specific low-back pain.

    PubMed

    Heymans, M W; van Tulder, M W; Esmail, R; Bombardier, C; Koes, B W

    2004-10-18

    Since the introduction of the Swedish back school in 1969, back schools have frequently been used for treating patients with low-back pain (LBP). However, the content of back schools has changed and appears to vary widely today. To assess the effectiveness of back schools for patients with non-specific LBP. We searched the MEDLINE and EMBASE databases and the Cochrane Central Register of Controlled Trials to May 2003 for relevant trials reported in English, Dutch, French or German. We also screened references from relevant reviews and included trials. Randomized controlled trials (RCTs) that reported on any type of back school for non-specific LBP were included. Four reviewers, blinded to authors, institution and journal, independently extracted the data and assessed the quality of the trials. We set the high quality level, a priori, at a trial meeting six or more of 11 internal validity criteria. As data were clinically and statistically too heterogeneous to perform a meta-analysis, we used a qualitative review (best evidence synthesis) to summarize the results. The evidence was classified into four levels (strong, moderate, limited or no evidence), taking into account the methodological quality of the studies. We also evaluated the clinical relevance of the studies. Nineteen RCTs (3584 patients) were included in this updated review. Overall, the methodological quality was low, with only six trials considered to be high quality. It was not possible to perform relevant subgroup analyses for LBP with radiation versus LBP without radiation. The results indicate that there is moderate evidence suggesting that back schools have better short and intermediate-term effects on pain and functional status than other treatments for patients with recurrent and chronic LBP. There is moderate evidence suggesting that back schools for chronic LBP in an occupational setting, are more effective than other treatments and placebo or waiting list controls on pain, functional status and return to work during short and intermediate-term follow-up. In general, the clinical relevance of the studies was rated as insufficient. There is moderate evidence suggesting that back schools, in an occupational setting, reduce pain, and improve function and return-to-work status, in the short and intermediate-term, compared to exercises, manipulation, myofascial therapy, advice, placebo or waiting list controls, for patients with chronic and recurrent LBP. However, future trials should improve methodological quality and clinical relevance and evaluate the cost-effectiveness of back schools.

  18. Long-Term Quality of Life in Adult Survivors of Pediatric Differentiated Thyroid Carcinoma.

    PubMed

    Nies, Marloes; Klein Hesselink, Mariëlle S; Huizinga, Gea A; Sulkers, Esther; Brouwers, Adrienne H; Burgerhof, Johannes G M; van Dam, Eveline W C M; Havekes, Bas; van den Heuvel-Eibrink, Marry M; Corssmit, Eleonora P M; Kremer, Leontien C M; Netea-Maier, Romana T; van der Pal, Heleen J H; Peeters, Robin P; Plukker, John T M; Ronckers, Cécile M; van Santen, Hanneke M; Tissing, Wim J E; Links, Thera P; Bocca, Gianni

    2017-04-01

    Little is known about long-term quality of life (QoL) of survivors of pediatric differentiated thyroid carcinoma. Therefore, this study aimed to evaluate generic health-related QoL (HRQoL), fatigue, anxiety, and depression in these survivors compared with matched controls, and to evaluate thyroid cancer-specific HRQoL in survivors only. Survivors diagnosed between 1970 and 2013 at age ≤18 years, were included. Exclusion criteria were a follow-up <5 years, attained age <18 years, or diagnosis of DTC as a second malignant neoplasm (SMN). Controls were matched by age, sex, and socioeconomic status. Survivors and controls were asked to complete 3 questionnaires [Short-Form 36 (HRQoL), Multidimensional Fatigue Inventory 20 (fatigue), and Hospital Anxiety and Depression Scale (anxiety/depression)]. Survivors completed a thyroid cancer-specific HRQoL questionnaire. Sixty-seven survivors and 56 controls. Median age of survivors at evaluation was 34.2 years (range, 18.8 to 61.7). Median follow-up was 17.8 years (range, 5.0 to 44.7). On most QoL subscales, scores of survivors and controls did not differ significantly. However, survivors had more physical problems (P = 0.031), role limitations due to physical problems (P = 0.021), and mental fatigue (P = 0.016) than controls. Some thyroid cancer-specific complaints (e.g., sensory complaints and chilliness) were present in survivors. Unemployment and more extensive disease or treatment characteristics were most frequently associated with worse QoL. Overall, long-term QoL in survivors of pediatric DTC was normal. Survivors experienced mild impairment of QoL in some domains (physical problems, mental fatigue, and various thyroid cancer-specific complaints). Factors possibly affecting QoL need further exploration. Copyright © 2017 Endocrine Society

  19. Scoliosis-specific information on the internet: has the "information highway" led to better information provision?

    PubMed

    Nason, Gregory J; Baker, Joseph F; Byrne, Damien P; Noel, Jacques; Moore, David; Kiely, Patrick J

    2012-10-01

    A quality-control Internet-based study using recognized quality scoring systems. To evaluate the quality of information available on the Internet. The quality of information available is of poor quality and unreliable, and this study was to determine if it has improved in line with the exponential increase in Internet-based information since the last time it was reviewed in 2005. To identify potential Web sites, the 5 most commonly accessed search engines were identified and a search for "scoliosis" was performed on each. The top 100 Web sites were reviewed. Each Web site was categorized according to its authorship and assessed using recognized scoring systems (Journal of American Medical Association [JAMA] and DISCERN criteria, scoliosis-specific content quality). The presence of the Health on the Net code, a reported quality-assurance marker, was noted. Forty-one unique Web sites were identified and analyzed. Five were academic, 11 were produced by physicians, 5 were commercial, 3 were nonphysician sites, 6 were attached to discussion groups or social media sites, 3 were media related, and 8 were not otherwise classifiable. There were significant differences noted between the authorship categories on the DISCERN score, JAMA benchmark criteria, and scoliosis-specific content quality score, (P = 0.001, <0.0001, and 0.009, respectively) with academic- and physician-related Web sites containing better-quality information. Internet sites with a Health on the Net code demonstrated higher-quality scoliosis-specific information than those without the code (P = 0.1368). The overall quality of information regarding scoliosis remains poor despite an exponential increase in the number of sites available. Patients need to be educated about appropriate Internet use-academic- and physician-provided sites have been shown to contain better-quality information. We have a potential role as clinicians to not only direct patients to appropriate sites but also to help in developing content on the Internet.

  20. Systematic Review of Plant-Based Homeopathic Basic Research: An Update.

    PubMed

    Ücker, Annekathrin; Baumgartner, Stephan; Sokol, Anezka; Huber, Roman; Doesburg, Paul; Jäger, Tim

    2018-05-01

     Plant-based test systems have been described as a useful tool for investigating possible effects of homeopathic preparations. The last reviews of this research field were published in 2009/2011. Due to recent developments in the field, an update is warranted. Publications on plant-based test systems were analysed with regard to publication quality, reproducibility and potential for further research.  A literature search was conducted in online databases and specific journals, including publications from 2008 to 2017 dealing with plant-based test systems in homeopathic basic research. To be included, they had to contain statistical analysis and fulfil quality criteria according to a pre-defined manuscript information score (MIS). Publications scoring at least 5 points (maximum 10 points) were assumed to be adequate. They were analysed for the use of adequate controls, outcome and reproducibility.  Seventy-four publications on plant-based test systems were found. Thirty-nine publications were either abstracts or proceedings of conferences and were excluded. From the remaining 35 publications, 26 reached a score of 5 or higher in the MIS. Adequate controls were used in 13 of these publications. All of them described specific effects of homeopathic preparations. The publication quality still varied: a substantial number of publications (23%) did not adequately document the methods used. Four reported on replication trials. One replication trial found effects of homeopathic preparations comparable to the original study. Three replication trials failed to confirm the original study but identified possible external influencing factors. Five publications described novel plant-based test systems. Eight trials used systematic negative control experiments to document test system stability.  Regarding research design, future trials should implement adequate controls to identify specific effects of homeopathic preparations and include systematic negative control experiments. Further external and internal replication trials, and control of influencing factors, are needed to verify results. Standardised test systems should be developed. The Faculty of Homeopathy.

  1. Intensive gait training with rhythmic auditory stimulation in individuals with chronic hemiparetic stroke: a pilot randomized controlled study.

    PubMed

    Cha, Yuri; Kim, Young; Hwang, Sujin; Chung, Yijung

    2014-01-01

    Motor relearning protocols should involve task-oriented movement, focused attention, and repetition of desired movements. To investigate the effect of intensive gait training with rhythmic auditory stimulation on postural control and gait performance in individuals with chronic hemiparetic stroke. Twenty patients with chronic hemiparetic stroke participated in this study. Subjects in the Rhythmic auditory stimulation training group (10 subjects) underwent intensive gait training with rhythmic auditory stimulation for a period of 6 weeks (30 min/day, five days/week), while those in the control group (10 subjects) underwent intensive gait training for the same duration. Two clinical measures, Berg balance scale and stroke specific quality of life scale, and a 2-demensional gait analysis system, were used as outcome measure. To provide rhythmic auditory stimulation during gait training, the MIDI Cuebase musical instrument digital interface program and a KM Player version 3.3 was utilized for this study. Intensive gait training with rhythmic auditory stimulation resulted in significant improvement in scores on the Berg balance scale, gait velocity, cadence, stride length and double support period in affected side, and stroke specific quality of life scale compared with the control group after training. Findings of this study suggest that intensive gait training with rhythmic auditory stimulation improves balance and gait performance as well as quality of life, in individuals with chronic hemiparetic stroke.

  2. Standardisation of DNA quantitation by image analysis: quality control of instrumentation.

    PubMed

    Puech, M; Giroud, F

    1999-05-01

    DNA image analysis is frequently performed in clinical practice as a prognostic tool and to improve diagnosis. The precision of prognosis and diagnosis depends on the accuracy of analysis and particularly on the quality of image analysis systems. It has been reported that image analysis systems used for DNA quantification differ widely in their characteristics (Thunissen et al.: Cytometry 27: 21-25, 1997). This induces inter-laboratory variations when the same sample is analysed in different laboratories. In microscopic image analysis, the principal instrumentation errors arise from the optical and electronic parts of systems. They bring about problems of instability, non-linearity, and shading and glare phenomena. The aim of this study is to establish tools and standardised quality control procedures for microscopic image analysis systems. Specific reference standard slides have been developed to control instability, non-linearity, shading and glare phenomena and segmentation efficiency. Some systems have been controlled with these tools and these quality control procedures. Interpretation criteria and accuracy limits of these quality control procedures are proposed according to the conclusions of a European project called PRESS project (Prototype Reference Standard Slide). Beyond these limits, tested image analysis systems are not qualified to realise precise DNA analysis. The different procedures presented in this work determine if an image analysis system is qualified to deliver sufficiently precise DNA measurements for cancer case analysis. If the controlled systems are beyond the defined limits, some recommendations are given to find a solution to the problem.

  3. Quality controls for gamma cameras and PET cameras: development of a free open-source ImageJ program

    NASA Astrophysics Data System (ADS)

    Carlier, Thomas; Ferrer, Ludovic; Berruchon, Jean B.; Cuissard, Regis; Martineau, Adeline; Loonis, Pierre; Couturier, Olivier

    2005-04-01

    Acquisition data and treatments for quality controls of gamma cameras and Positron Emission Tomography (PET) cameras are commonly performed with dedicated program packages, which are running only on manufactured computers and differ from each other, depending on camera company and program versions. The aim of this work was to develop a free open-source program (written in JAVA language) to analyze data for quality control of gamma cameras and PET cameras. The program is based on the free application software ImageJ and can be easily loaded on any computer operating system (OS) and thus on any type of computer in every nuclear medicine department. Based on standard parameters of quality control, this program includes 1) for gamma camera: a rotation center control (extracted from the American Association of Physics in Medicine, AAPM, norms) and two uniformity controls (extracted from the Institute of Physics and Engineering in Medicine, IPEM, and National Electronic Manufacturers Association, NEMA, norms). 2) For PET systems, three quality controls recently defined by the French Medical Physicist Society (SFPM), i.e. spatial resolution and uniformity in a reconstructed slice and scatter fraction, are included. The determination of spatial resolution (thanks to the Point Spread Function, PSF, acquisition) allows to compute the Modulation Transfer Function (MTF) in both modalities of cameras. All the control functions are included in a tool box which is a free ImageJ plugin and could be soon downloaded from Internet. Besides, this program offers the possibility to save on HTML format the uniformity quality control results and a warning can be set to automatically inform users in case of abnormal results. The architecture of the program allows users to easily add any other specific quality control program. Finally, this toolkit is an easy and robust tool to perform quality control on gamma cameras and PET cameras based on standard computation parameters, is free, run on any type of computer and will soon be downloadable from the net (http://rsb.info.nih.gov/ij/plugins or http://nucleartoolkit.free.fr).

  4. Performance Assessment of Internal Quality Control (IQC) Products in Blood Transfusion Compatibility Testing in China

    PubMed Central

    Li, Jing-Jing; Gao, Qi; Liu, Zhi-Dong; Kang, Qiong-Hua; Hou, Yi-Jun; Zhang, Luo-Chuan; Hu, Xiao-Mei; Li, Jie; Zhang, Juan

    2015-01-01

    Internal quality control (IQC) is a critical component of laboratory quality management, and IQC products can determine the reliability of testing results. In China, given the fact that most blood transfusion compatibility laboratories do not employ IQC products or do so minimally, there is a lack of uniform and standardized IQC methods. To explore the reliability of IQC products and methods, we studied 697 results from IQC samples in our laboratory from 2012 to 2014. The results showed that the sensitivity and specificity of the IQCs in anti-B testing were 100% and 99.7%, respectively. The sensitivity and specificity of the IQCs in forward blood typing, anti-A testing, irregular antibody screening, and cross-matching were all 100%. The reliability analysis indicated that 97% of anti-B testing results were at a 99% confidence level, and 99.9% of forward blood typing, anti-A testing, irregular antibody screening, and cross-matching results were at a 99% confidence level. Therefore, our IQC products and methods are highly sensitive, specific, and reliable. Our study paves the way for the establishment of a uniform and standardized IQC method for pre-transfusion compatibility testing in China and other parts of the world. PMID:26488582

  5. [Compatibility of different quality control systems].

    PubMed

    Invernizzi, Enrico

    2002-01-01

    Management of the good laboratory practice (GLP) quality system presupposes its linking to a basic recognized and approved quality system, from which it can draw on management procedures common to all quality systems, such as the ISO 9000 set of norms. A quality system organized in this way can also be integrated with other dedicated quality systems, or parts of them, to obtain principles or management procedures for specific topics. The aim of this organization is to set up a reliable, recognized quality system compatible with the principles of GLP and other quality management systems, which provides users with a simplified set of easily accessible management tools and answers. The organization of this quality system is set out in the quality assurance programme, which is actually the document in which the test facility incorporates the GLP principles into its own quality organization.

  6. Evolution and Development of Effective Feedstock Specifications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Garold Gresham; Rachel Emerson; Amber Hoover

    The U.S. Department of Energy promotes the production of a range of liquid fuels and fuel blend stocks from lignocellulosic biomass feedstocks by funding fundamental and applied research that advances the state of technology in biomass collection, conversion, and sustainability. As part of its involvement in this program, the Idaho National Laboratory (INL) investigates the feedstock logistics economics and sustainability of these fuels. The 2012 feedstock logistics milestone demonstrated that for high-yield areas that minimize the transportation distances of a low-density, unstable biomass, we could achieve a delivered cost of $35/ton. Based on current conventional equipment and processes, the 2012more » logistics design is able to deliver the volume of biomass needed to fulfill the 2012 Renewable Fuel Standard’s targets for ethanol. However, the Renewable Fuel Standard’s volume targets are continuing to increase and are expected to peak in 2022 at 36 billion gallons. Meeting these volume targets and achieving a national-scale biofuels industry will require expansion of production capacity beyond the 2012 Conventional Feedstock Supply Design Case to access diverse available feedstocks, regardless of their inherent ability to meet preliminary biorefinery quality feedstock specifications. Implementation of quality specifications (specs), as outlined in the 2017 Design Case – “Feedstock Supply System Design and Economics for Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels” (in progress), requires insertion of deliberate, active quality controls into the feedstock supply chain, whereas the 2012 Conventional Design only utilizes passive quality controls.« less

  7. Evaluation of erosion control BMPs on ditched haul road stream crossing approaches following reconstruction

    Treesearch

    A.J. Lang; W.M. Aust; M.C. Bolding; E.B. Schilling

    2016-01-01

    Ditched forest roads leading to stream crossings and used for log transportation have recently been a topic of water quality concern and legal controversy. Best management practices (BMPs) can reduce potential water quality issues, yet few research studies have quantified BMP costs and reductions in sediment from implementing specific ditch BMPs. Researchers...

  8. Flying qualities design criteria applicable to supersonic cruise aircraft

    NASA Technical Reports Server (NTRS)

    Chalk, C. R.

    1980-01-01

    A comprehensive set of flying qualities design criteria was prepared for use in the supersonic cruise research program. The framework for stating the design criteria is established and design criteria are included which address specific failures, approach to dangerous flight conditions, flight at high angle of attack, longitudinal and lateral directional stability and control, the primary flight control system, and secondary flight controls. Examples are given of lateral directional design criteria limiting lateral accelerations at the cockpit, time to roll through 30 deg of bank, and time delay in the pilot's command path. Flight test data from the Concorde certification program are used to substantiate a number of the proposed design criteria.

  9. The NCS code of practice for the quality assurance and control for volumetric modulated arc therapy

    NASA Astrophysics Data System (ADS)

    Mans, Anton; Schuring, Danny; Arends, Mark P.; Vugts, Cornelia A. J. M.; Wolthaus, Jochem W. H.; Lotz, Heidi T.; Admiraal, Marjan; Louwe, Rob J. W.; Öllers, Michel C.; van de Kamer, Jeroen B.

    2016-10-01

    In 2010, the NCS (Netherlands Commission on Radiation Dosimetry) installed a subcommittee to develop guidelines for quality assurance and control for volumetric modulated arc therapy (VMAT) treatments. The report (published in 2015) has been written by Dutch medical physicists and has therefore, inevitably, a Dutch focus. This paper is a condensed version of these guidelines, the full report in English is freely available from the NCS website www.radiationdosimetry.org. After describing the transition from IMRT to VMAT, the paper addresses machine quality assurance (QA) and treatment planning system (TPS) commissioning for VMAT. The final section discusses patient specific QA issues such as the use of class solutions, measurement devices and dose evaluation methods.

  10. The importance of lake-specific characteristics for water quality across the continental United States.

    PubMed

    Read, Emily K; Patil, Vijay P; Oliver, Samantha K; Hetherington, Amy L; Brentrup, Jennifer A; Zwart, Jacob A; Winters, Kirsten M; Corman, Jessica R; Nodine, Emily R; Woolway, R Iestyn; Dugan, Hilary A; Jaimes, Aline; Santoso, Arianto B; Hong, Grace S; Winslow, Luke A; Hanson, Paul C; Weathers, Kathleen C

    2015-06-01

    Lake water quality is affected by local and regional drivers, including lake physical characteristics, hydrology, landscape position, land cover, land use, geology, and climate. Here, we demonstrate the utility of hypothesis testing within the landscape limnology framework using a random forest algorithm on a national-scale, spatially explicit data set, the United States Environmental Protection Agency's 2007 National Lakes Assessment. For 1026 lakes, we tested the relative importance of water quality drivers across spatial scales, the importance of hydrologic connectivity in mediating water quality drivers, and how the importance of both spatial scale and connectivity differ across response variables for five important in-lake water quality metrics (total phosphorus, total nitrogen, dissolved organic carbon, turbidity, and conductivity). By modeling the effect of water quality predictors at different spatial scales, we found that lake-specific characteristics (e.g., depth, sediment area-to-volume ratio) were important for explaining water quality (54-60% variance explained), and that regionalization schemes were much less effective than lake specific metrics (28-39% variance explained). Basin-scale land use and land cover explained between 45-62% of variance, and forest cover and agricultural land uses were among the most important basin-scale predictors. Water quality drivers did not operate independently; in some cases, hydrologic connectivity (the presence of upstream surface water features) mediated the effect of regional-scale drivers. For example, for water quality in lakes with upstream lakes, regional classification schemes were much less effective predictors than lake-specific variables, in contrast to lakes with no upstream lakes or with no surface inflows. At the scale of the continental United States, conductivity was explained by drivers operating at larger spatial scales than for other water quality responses. The current regulatory practice of using regionalization schemes to guide water quality criteria could be improved by consideration of lake-specific characteristics, which were the most important predictors of water quality at the scale of the continental United States. The spatial extent and high quality of contextual data available for this analysis makes this work an unprecedented application of landscape limnology theory to water quality data. Further, the demonstrated importance of lake morphology over other controls on water quality is relevant to both aquatic scientists and managers.

  11. Feasibility analysis of base compaction specification : [project brief].

    DOT National Transportation Integrated Search

    2013-02-01

    Appropriate design and construction of the aggregate base layer has significant influence on : structural stability and performance of pavements. Controlling the construction quality of : the granular base layer is important to achieve long-lasting p...

  12. Frost as an insulator

    NASA Technical Reports Server (NTRS)

    Bronson, J. C.

    1970-01-01

    Insulating qualities of frost and mechanisms for using frost in specific applications in controlled experiments are discussed. With available supply of moist air, frost possesses inherent advantage of easy insulation of cryogenic lines and improvement of overall system efficiency.

  13. Canadian and U.S. Cooperation for the development of standards and specifications for emerging mapping technologies

    USGS Publications Warehouse

    Habib, A.; Jarvis, A.; Al-Durgham, M. M.; Lay, J.; Quackenbush, P.; Stensaas, G.; Moe, D.

    2007-01-01

    The mapping community is witnessing significant advances in available sensors, such as medium format digital cameras (MFDC) and Light Detection and Ranging (LiDAR) systems. In this regard, the Digital Photogrammetry Research Group (DPRG) of the Department of Geomatics Engineering at the University of Calgary has been actively involved in the development of standards and specifications for regulating the use of these sensors in mapping activities. More specifically, the DPRG has been working on developing new techniques for the calibration and stability analysis of medium format digital cameras. This research is essential since these sensors have not been developed with mapping applications in mind. Therefore, prior to their use in Geomatics activies, new standards should be developed to ensure the quality of the developed products. In another front, the persistent improvement in direct geo-referencing technology has led to an expansion in the use of LiDAR systems for the acquisition of dense and accurate surface information. However, the processing of the raw LiDAR data (e.g., ranges, mirror angles, and navigation data) remains a non-transparent process that is proprietary to the manufacturers of LiDAR systems. Therefore, the DPRG has been focusing on the development of quality control procedures to quantify the accuracy of LiDAR output in the absence of initial system measurements. This paper presents a summary of the research conducted by the DPRG together with the British Columbia Base Mapping and Geomatic Services (BMGS) and the United States Geological Survey (USGS) for the development of quality assurance and quality control procedures for emerging mapping technologies. The outcome of this research will allow for the possiblity of introducing North American Standards and Specifications to regulate the use of MFDC and LiDAR systems in the mapping industry.

  14. Multi-application controls: Robust nonlinear multivariable aerospace controls applications

    NASA Technical Reports Server (NTRS)

    Enns, Dale F.; Bugajski, Daniel J.; Carter, John; Antoniewicz, Bob

    1994-01-01

    This viewgraph presentation describes the general methodology used to apply Honywell's Multi-Application Control (MACH) and the specific application to the F-18 High Angle-of-Attack Research Vehicle (HARV) including piloted simulation handling qualities evaluation. The general steps include insertion of modeling data for geometry and mass properties, aerodynamics, propulsion data and assumptions, requirements and specifications, e.g. definition of control variables, handling qualities, stability margins and statements for bandwidth, control power, priorities, position and rate limits. The specific steps include choice of independent variables for least squares fits to aerodynamic and propulsion data, modifications to the management of the controls with regard to integrator windup and actuation limiting and priorities, e.g. pitch priority over roll, and command limiting to prevent departures and/or undesirable inertial coupling or inability to recover to a stable trim condition. The HARV control problem is characterized by significant nonlinearities and multivariable interactions in the low speed, high angle-of-attack, high angular rate flight regime. Systematic approaches to the control of vehicle motions modeled with coupled nonlinear equations of motion have been developed. This paper will discuss the dynamic inversion approach which explicity accounts for nonlinearities in the control design. Multiple control effectors (including aerodynamic control surfaces and thrust vectoring control) and sensors are used to control the motions of the vehicles in several degrees-of-freedom. Several maneuvers will be used to illustrate performance of MACH in the high angle-of-attack flight regime. Analytical methods for assessing the robust performance of the multivariable control system in the presence of math modeling uncertainty, disturbances, and commands have reached a high level of maturity. The structured singular value (mu) frequency response methodology is presented as a method for analyzing robust performance and the mu-synthesis method will be presented as a method for synthesizing a robust control system. The paper concludes with the author's expectations regarding future applications of robust nonlinear multivariable controls.

  15. Allergen manufacturing and quality aspects for allergen immunotherapy in Europe and the United States: An analysis from the EAACI AIT Guidelines Project.

    PubMed

    Bonertz, A; Roberts, G; Slater, J E; Bridgewater, J; Rabin, R L; Hoefnagel, M; Timon, M; Pini, C; Pfaar, O; Sheikh, A; Ryan, D; Akdis, C; Goldstein, J; Poulsen, L K; van Ree, R; Rhyner, C; Barber, D; Palomares, O; Pawankar, R; Hamerlijnk, D; Klimek, L; Agache, I; Angier, E; Casale, T; Fernandez-Rivas, M; Halken, S; Jutel, M; Lau, S; Pajno, G; Sturm, G; Varga, E M; Gerth van Wijk, R; Bonini, S; Muraro, A; Vieths, S

    2018-04-01

    Adequate quality is essential for any medicinal product to be eligible for marketing. Quality includes verification of the identity, content and purity of a medicinal product in combination with a specified production process and its control. Allergen products derived from natural sources require particular considerations to ensure adequate quality. Here, we describe key aspects of the documentation on manufacturing and quality aspects for allergen immunotherapy products in the European Union and the United States. In some key parts, requirements in these areas are harmonized while other fields are regulated separately between both regions. Essential differences are found in the use of Reference Preparations, or the requirement to apply standardized assays for potency determination. As the types of products available are different in specific regions, regulatory guidance for such products may also be available in one specific region only, such as for allergoids in the European Union. Region-specific issues and priorities are a result of this. As allergen products derived from natural sources are inherently variable in their qualitative and quantitative composition, these products present special challenges to balance the variability and ensuring batch-to-batch consistency. Advancements in scientific knowledge on specific allergens and their role in allergic disease will consequentially find representation in future regulatory guidelines. © 2017 EAACI and John Wiley and Sons A/S. Published by John Wiley and Sons Ltd.

  16. Diabetes-related quality of life is enhanced by glycaemic improvement in older people.

    PubMed

    Abbatecola, A M; Spazzafumo, L; Fabbietti, P; Testa, R; Rabini, R A; Bonfigli, A R; Corsonello, A; Lattanzio, F; Paolisso, G

    2015-02-01

    To investigate the validity and reliability of the Audit of Diabetes-Dependent Quality of Life instrument in older Italians with diabetes and to test the association of diabetes-related quality of life with glycaemic control over time. A total of 558 outpatients with Type 2 diabetes from the Diabetic Unit of the Italian National Research Centre on Aging Hospital in Ancona were enrolled to complete questionnaires (Audit of Diabetes-Dependent Quality of Life-19 and the Short-Form-12), and to undergo clinical and biochemical testing at baseline and at 12 months of follow-up. The overall impact of diabetes using the average weighted impact score from the Audit of Diabetes-Dependent Quality of Life questionnaire was calculated. Participants were categorized according to this score as having either less or more negative diabetes-related quality of life. Participants had a mean ± SD age of 67.7 ± 9.2 years and 51.8% were male. Factor analysis and Cronbach's coefficient of internal consistency (Cronbach's α = 0.931) confirmed that the 19 domain-specific Audit of Diabetes-Dependent Quality of Life items could be combined into a single scale in this Italian population. The impact score correlated with the physical (r = 0.275; P < 0.001) and mental components (r = 0.291; P < 0.001) of the Short-Form-12 questionnaire. Significant differences were found according to diabetic complications in specific Audit of Diabetes-Dependent Quality of Life items and impact scores. Insulin use had a greater association with a more negative quality of life compared with other antidiabetic agents. A multivariate linear regression model with restricted linear spline application showed that the relationship between HbA1c and impact score was not linear and that the change in the impact score was associated with improved glycaemic control in those with a less negative diabetes-related quality of life at 12 months. The Audit of Diabetes-Dependent Quality of Life-19 is a valid tool for measuring the impact of diabetes on quality of life in older Italians. Perception of diabetes-related quality of life is associated with glycaemic control over time. © 2014 The Authors. Diabetic Medicine © 2014 Diabetes UK.

  17. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Engels, J.

    The Environmental Restoration (ER) Program was established for the investigation and remediation of inactive US Department of Energy (DOE) sites and facilities that have been declared surplus in terms of their previous uses. The purpose of this document is to Specify ER requirements for quality control (QC) of analytical data. Activities throughout all phases of the investigation may affect the quality of the final data product, thus are subject to control specifications. Laboratory control is emphasized in this document, and field concerns will be addressed in a companion document Energy Systems, in its role of technical coordinator and at themore » request of DOE-OR, extends the application of these requirements to all participants in ER activities. Because every instance and concern may not be addressed in this document, participants are encouraged to discuss any questions with the ER Quality Assurance (QA) Office, the Analytical Environmental Support Group (AESG), or the Analytical Project Office (APO).« less

  18. Quality Control of Wind Data from 50-MHz Doppler Radar Wind Profiler

    NASA Technical Reports Server (NTRS)

    Vacek, Austin

    2016-01-01

    Upper-level wind profiles obtained from a 50-MHz Doppler Radar Wind Profiler (DRWP) instrument at Kennedy Space Center are incorporated in space launch vehicle design and day-of-launch operations to assess wind effects on the vehicle during ascent. Automated and manual quality control (QC) techniques are implemented to remove spurious data in the upper-level wind profiles caused from atmospheric and non-atmospheric artifacts over the 2010-2012 period of record (POR). By adding the new quality controlled profiles with older profiles from 1997-2009, a robust database will be constructed of upper-level wind characteristics. Statistical analysis will determine the maximum, minimum, and 95th percentile of the wind components from the DRWP profiles over recent POR and compare against the older database. Additionally, this study identifies specific QC flags triggered during the QC process to understand how much data is retained and removed from the profiles.

  19. Quality Control of Wind Data from 50-MHz Doppler Radar Wind Profiler

    NASA Technical Reports Server (NTRS)

    Vacek, Austin

    2015-01-01

    Upper-level wind profiles obtained from a 50-MHz Doppler Radar Wind Profiler (DRWP) instrument at Kennedy Space Center are incorporated in space launch vehicle design and day-of-launch operations to assess wind effects on the vehicle during ascent. Automated and manual quality control (QC) techniques are implemented to remove spurious data in the upper-level wind profiles caused from atmospheric and non-atmospheric artifacts over the 2010-2012 period of record (POR). By adding the new quality controlled profiles with older profiles from 1997-2009, a robust database will be constructed of upper-level wind characteristics. Statistical analysis will determine the maximum, minimum, and 95th percentile of the wind components from the DRWP profiles over recent POR and compare against the older database. Additionally, this study identifies specific QC flags triggered during the QC process to understand how much data is retained and removed from the profiles.

  20. Quality of life assessment in ocular toxoplasmosis in a Colombian population.

    PubMed

    de-la-Torre, Alejandra; González-López, Gilberto; Montoya-Gutiérrez, Johanna Milena; Marín-Arango, Viviana; Gómez-Marín, Jorge Enrique

    2011-08-01

    To assess the quality of life in patients with ocular toxoplasmosis. The participants were 29 otherwise healthy patients with retinochoroidal lesions consistent with Toxoplasma infection. The controls were 29 gender and age-matched people with normal visual function who came from the same socioeconomic and educational background as the participants. The authors used the version of the National Eye Institute 25-item visual function questionnaire (NEI VFQ25). Patients with ocular toxoplasmosis had statistically significant lower scores than controls for all the subscales, except for color vision. Patients with bilateral lesions were more affected in the mental health, difficulties role, and specific vision subscales. The median of the compound score for the participants was 79 (range 35-99) and for the controls was 95 (range 72-98). People with ocular toxoplasmosis have worse vision-related quality of life than people without the condition, especially if they have bilateral lesions and more recurrences.

  1. QTL analysis of genotype x environment interactions affecting cotton fiber quality.

    PubMed

    Paterson, A H; Saranga, Y; Menz, M; Jiang, C-X; Wright, R J

    2003-02-01

    Cotton is unusual among major crops in that large acreages are grown under both irrigated and rainfed conditions, making genotype x environment interactions of even greater importance than usual in designing crop-improvement strategies. We describe the impact of well-watered versus water-limited growth conditions on the genetic control of fiber quality, a complex suite of traits that collectively determine the utility of cotton. Fiber length, length uniformity, elongation, strength, fineness, and color (yellowness) were influenced by 6, 7, 9, 21, 25 and 11 QTLs (respectively) that could be detected in one or more treatments. The genetic control of cotton fiber quality was markedly affected both by general differences between growing seasons ("years") and by specific differences in water management regimes. Seventeen QTLs were detected only in the water-limited treatment while only two were specific to the well-watered treatment, suggesting that improvement of fiber quality under water stress may be even more complicated than improvement of this already complex trait under well-watered conditions. In crops such as cotton with widespread use of both irrigated and rainfed production systems, the need to manipulate larger numbers of genes to confer adequate quality under both sets of conditions will reduce the expected rate of genetic gain. These difficulties may be partly ameliorated by efficiencies gained through identification and use of diagnostic DNA markers, including those identified herein.

  2. National survey on internal quality control for tumour markers in clinical laboratories in China.

    PubMed

    Wang, Wei; Zhong, Kun; Yuan, Shuai; He, Falin; Du, Yuxuan; Hu, Zhehui; Wang, Zhiguo

    2018-06-15

    This survey was initiated to obtain knowledge on the current situation of internal quality control (IQC) practice for tumour markers (TMs) in China. Additionally, we tried to acquire the most appropriate quality specifications. This survey was a current status survey. The IQC information had been collected via online questionnaires. All of 1821 clinical laboratories which participated in the 2016 TMs external quality assessment (EQA) programme had been enrolled. The imprecision evaluation criteria were the minimal, desirable, and optimal allowable imprecisions based on biological variations, and 1/3 total allowable error (TEa) and 1/4 TEa. A total of 1628 laboratories answered the questionnaires (89%). The coefficients of variation (CVs) of the IQC of participant laboratories varied greatly from 1% (5 th percentile) to 13% (95 th percentile). More than 82% (82 - 91%) of participant laboratories two types of CVs met 1/3 TEa except for CA 19-9. The percentiles of current CVs were smaller than cumulative CVs. A number of 1240 laboratories (76%) reported their principles and systems used. The electrochemiluminescence was the most used principle (45%) and had the smallest CVs. The performance of laboratories for TMs IQC has yet to be improved. On the basis of the obtained results, 1/3 TEa would be realistic and attainable quality specification for TMs IQC for clinical laboratories in China.

  3. Effect of Food Waste Co-Digestion on Digestion, Dewatering, and Cake Quality.

    PubMed

    Higgins, Matthew; Rajagopalan, Ganesh; Miller, Andre; Brown, Jeffrey; Beightol, Steven

    2017-01-01

      The objective of this study was to evaluate the effect of food waste addition on anaerobic digestion performance as well as downstream parameters including dewatering, cake quality, and filtrate quality. Laboratory-scale digesters were fed processed food waste at rates of 25%, 45%, and 65% increased chemical oxygen demand (COD) loading rates compared to a control fed only primary and secondary solids. The specific methane yield increased from 370 L CH4/kg VSadded for the control to 410, 440, and 470 L CH4/kg VSadded for the 25, 45, and 65% food waste addition, respectively. The cake solids after dewatering were all higher for the food waste digesters compared to the control, with the highest cake solids being measured for the 45% food-waste loading. Compared to the control digester, the biosolids odorant concentration increased for the lowest dose of food waste. Odorant concentrations were below detection for the highest food waste loading.

  4. Identification of ethylene oxide in herbs, spices and other dried vegetables imported into Italy.

    PubMed

    Bononi, Monica; Quaglia, Giancarlo; Tateo, Fernando

    2014-01-01

    Gas chromatography-mass spectrometry was used to analyse ethylene oxide (EO) in 63 samples of dried vegetable materials for food use derived from import commodities and subjected to quality control for three food-transformation industries. EO residues were quantified through the determination of ethylene chlorohydrin (ECH). About 29% of the samples analysed contained more than 0.3 mg kg(-1) of EO. Thus, this specific analytical control limited to 20% of import aromatic matters needs to be increased. This paper demonstrates the importance of this specific control considering the banned use of microbial decontamination EO treatment in the European Union.

  5. WELDSMART: A vision-based expert system for quality control

    NASA Technical Reports Server (NTRS)

    Andersen, Kristinn; Barnett, Robert Joel; Springfield, James F.; Cook, George E.

    1992-01-01

    This work was aimed at exploring means for utilizing computer technology in quality inspection and evaluation. Inspection of metallic welds was selected as the main application for this development and primary emphasis was placed on visual inspection, as opposed to other inspection methods, such as radiographic techniques. Emphasis was placed on methodologies with the potential for use in real-time quality control systems. Because quality evaluation is somewhat subjective, despite various efforts to classify discontinuities and standardize inspection methods, the task of using a computer for both inspection and evaluation was not trivial. The work started out with a review of the various inspection techniques that are used for quality control in welding. Among other observations from this review was the finding that most weld defects result in abnormalities that may be seen by visual inspection. This supports the approach of emphasizing visual inspection for this work. Quality control consists of two phases: (1) identification of weld discontinuities (some of which may be severe enough to be classified as defects), and (2) assessment or evaluation of the weld based on the observed discontinuities. Usually the latter phase results in a pass/fail judgement for the inspected piece. It is the conclusion of this work that the first of the above tasks, identification of discontinuities, is the most challenging one. It calls for sophisticated image processing and image analysis techniques, and frequently ad hoc methods have to be developed to identify specific features in the weld image. The difficulty of this task is generally not due to limited computing power. In most cases it was found that a modest personal computer or workstation could carry out most computations in a reasonably short time period. Rather, the algorithms and methods necessary for identifying weld discontinuities were in some cases limited. The fact that specific techniques were finally developed and successfully demosntrated to work illustrates that the general approach taken here appears to be promising for commercial development of computerized quality inspection systems. Inspection based on these techniques may be used to supplement or substitute more elaborate inspection methods, such as x-ray inspections.

  6. Quality-Controlled Small-Scale Production of a Well-Defined Bacteriophage Cocktail for Use in Human Clinical Trials

    PubMed Central

    Merabishvili, Maya; Pirnay, Jean-Paul; Verbeken, Gilbert; Chanishvili, Nina; Tediashvili, Marina; Lashkhi, Nino; Glonti, Thea; Krylov, Victor; Mast, Jan; Van Parys, Luc; Lavigne, Rob; Volckaert, Guido; Mattheus, Wesley; Verween, Gunther; De Corte, Peter; Rose, Thomas; Jennes, Serge; Zizi, Martin; De Vos, Daniel; Vaneechoutte, Mario

    2009-01-01

    We describe the small-scale, laboratory-based, production and quality control of a cocktail, consisting of exclusively lytic bacteriophages, designed for the treatment of Pseudomonas aeruginosa and Staphylococcus aureus infections in burn wound patients. Based on succesive selection rounds three bacteriophages were retained from an initial pool of 82 P. aeruginosa and 8 S. aureus bacteriophages, specific for prevalent P. aeruginosa and S. aureus strains in the Burn Centre of the Queen Astrid Military Hospital in Brussels, Belgium. This cocktail, consisting of P. aeruginosa phages 14/1 (Myoviridae) and PNM (Podoviridae) and S. aureus phage ISP (Myoviridae) was produced and purified of endotoxin. Quality control included Stability (shelf life), determination of pyrogenicity, sterility and cytotoxicity, confirmation of the absence of temperate bacteriophages and transmission electron microscopy-based confirmation of the presence of the expected virion morphologic particles as well as of their specific interaction with the target bacteria. Bacteriophage genome and proteome analysis confirmed the lytic nature of the bacteriophages, the absence of toxin-coding genes and showed that the selected phages 14/1, PNM and ISP are close relatives of respectively F8, φKMV and phage G1. The bacteriophage cocktail is currently being evaluated in a pilot clinical study cleared by a leading Medical Ethical Committee. PMID:19300511

  7. Imbedding HACCP principles in dairy herd health and production management: case report on calf rearing

    PubMed Central

    2008-01-01

    Driven by consumer demands, European legislation has suggested the use of HACCP (Hazard Analysis Critical Control Point) as the quality risk management programme for the whole dairy chain. Until now, an exception has been made for primary producers, but as regulations evolve, on-farm HACCP-like programmes should be ready to assure food safety as well as animal health and animal welfare. In our field experiment, the HACCP-concept was used to combine both optimal farm management and formalisation of quality assurance in an on-farm situation in the Netherlands. The process of young stock rearing was chosen, since its importance for the future of the farm is often underestimated. Hazards and their associated risk factors can be controlled within the farm-specific standards and tolerances, as targets can be controlled by corrective measures and by implementation of farm-specific worksheets. The veterinarian is pivotal for the facility-based HACCP team, since he/she has knowledge about on-farm risk assessment and relations between clinical pathology, feed and farm management. The HACCP concept in combination with veterinary herd health and production management programmes offers a promising approach to optimise on-farm production processes (i.e., young stock rearing) in addition to a structural approach for quality risk management on dairy farms. PMID:21851722

  8. Imbedding HACCP principles in dairy herd health and production management: case report on calf rearing.

    PubMed

    Boersema, Jsc; Noordhuizen, Jptm; Vieira, A; Lievaart, Jj; Baumgartner, W

    2008-09-01

    Driven by consumer demands, European legislation has suggested the use of HACCP (Hazard Analysis Critical Control Point) as the quality risk management programme for the whole dairy chain. Until now, an exception has been made for primary producers, but as regulations evolve, on-farm HACCP-like programmes should be ready to assure food safety as well as animal health and animal welfare. In our field experiment, the HACCP-concept was used to combine both optimal farm management and formalisation of quality assurance in an on-farm situation in the Netherlands. The process of young stock rearing was chosen, since its importance for the future of the farm is often underestimated. Hazards and their associated risk factors can be controlled within the farm-specific standards and tolerances, as targets can be controlled by corrective measures and by implementation of farm-specific worksheets. The veterinarian is pivotal for the facility-based HACCP team, since he/she has knowledge about on-farm risk assessment and relations between clinical pathology, feed and farm management. The HACCP concept in combination with veterinary herd health and production management programmes offers a promising approach to optimise on-farm production processes (i.e., young stock rearing) in addition to a structural approach for quality risk management on dairy farms.

  9. Control Points in School Business Management, Presenting General Observations, Specific Control Points, and a Series of Checkpoints for the Practicing School Business Administrator.

    ERIC Educational Resources Information Center

    Association of School Business Officials, Chicago, IL.

    This revised outline of a 1962 address contains general guidelines considered still useful for practicing school business administrators. Introductory "general observations" and a preamble give advice about good personal qualities, policy and planning practices, and relations with school boards, community, staff, and fellow professional…

  10. Quality Assurance of RNA Expression Profiling in Clinical Laboratories

    PubMed Central

    Tang, Weihua; Hu, Zhiyuan; Muallem, Hind; Gulley, Margaret L.

    2012-01-01

    RNA expression profiles are increasingly used to diagnose and classify disease, based on expression patterns of as many as several thousand RNAs. To ensure quality of expression profiling services in clinical settings, a standard operating procedure incorporates multiple quality indicators and controls, beginning with preanalytic specimen preparation and proceeding thorough analysis, interpretation, and reporting. Before testing, histopathological examination of each cellular specimen, along with optional cell enrichment procedures, ensures adequacy of the input tissue. Other tactics include endogenous controls to evaluate adequacy of RNA and exogenous or spiked controls to evaluate run- and patient-specific performance of the test system, respectively. Unique aspects of quality assurance for array-based tests include controls for the pertinent outcome signatures that often supersede controls for each individual analyte, built-in redundancy for critical analytes or biochemical pathways, and software-supported scrutiny of abundant data by a laboratory physician who interprets the findings in a manner facilitating appropriate medical intervention. Access to high-quality reagents, instruments, and software from commercial sources promotes standardization and adoption in clinical settings, once an assay is vetted in validation studies as being analytically sound and clinically useful. Careful attention to the well-honed principles of laboratory medicine, along with guidance from government and professional groups on strategies to preserve RNA and manage large data sets, promotes clinical-grade assay performance. PMID:22020152

  11. A Control Law Design Method Facilitating Control Power, Robustness, Agility, and Flying Qualities Tradeoffs: CRAFT

    NASA Technical Reports Server (NTRS)

    Murphy, Patrick C.; Davidson, John B.

    1998-01-01

    A multi-input, multi-output control law design methodology, named "CRAFT", is presented. CRAFT stands for the design objectives addressed, namely, Control power, Robustness, Agility, and Flying Qualities Tradeoffs. The methodology makes use of control law design metrics from each of the four design objective areas. It combines eigenspace assignment, which allows for direct specification of eigenvalues and eigenvectors, with a graphical approach for representing the metrics that captures numerous design goals in one composite illustration. Sensitivity of the metrics to eigenspace choice is clearly displayed, enabling the designer to assess the cost of design tradeoffs. This approach enhances the designer's ability to make informed design tradeoffs and to reach effective final designs. An example of the CRAFT methodology applied to an advanced experimental fighter and discussion of associated design issues are provided.

  12. What is covered by "cancer rehabilitation" in PubMed? A review of randomized controlled trials 1990-2011.

    PubMed

    Gudbergsson, Sævar Berg; Dahl, Alv A; Loge, Jon Håvard; Thorsen, Lene; Oldervoll, Line M; Grov, Ellen K

    2015-02-01

    This focused review examines randomized controlled studies included by the term "cancer rehabilitation" in PubMed. The research questions concern the type of interventions performed and their methodological quality. Using the Medical Subject Headings (MeSH) terms: neoplasm AND rehabilitation, all articles with randomized controlled studies that included adult cancer patients, written in English, were extracted from PubMed. Papers covering physical exercise, psychiatric/psychological treatment or social support only were excluded as they had been reviewed recently. Abstracts and papers were assessed by 3 pairs of reviewers, and descriptive information was extracted systematically. Methodological quality was rated on a 10-item index scale, and the cut-off for acceptable quality was set at ≥ 8. A total of 132 (19%) of the 683 identified papers met the eligibility criteria and were assessed in detail. The papers were grouped into 5 thematic categories: 44 physical; 15 art and expressive; 47 psycho-educative; 21 emotionally supportive; and 5 others. Good quality of design was observed in 32 studies, 18 of them uni-dimensional and 14 multi-dimensional. Published randomized controlled studies on cancer rehabilitation are heterogeneous in terms of content and samples, and are mostly characterized by suboptimal design quality. Future studies should be more specific and well-designed with sufficient statistical strength.

  13. Effect of Habitat Conditions and Plant Traits on Leaf Damage in the Carduoideae Subfamily

    PubMed Central

    Münzbergová, Zuzana; Skuhrovec, Jiří

    2013-01-01

    Plant traits are the key factors that determine herbivore foraging selection. The traits serving as defense traits against herbivores represent a wide range of traits, such as chemical, physiological, morphological and life-history traits. While many studies considered plant defense traits at the within-species scale, much less is known from comparisons of a wide range of closely related species. The aim of this study was to identify factors responsible for the intensity of leaf damage in the Carduoideae subfamily of Asteraceae, which hosts many invasive species and thus is potential candidate plant species that could be controlled by biological control. Specifically, we wanted to see the relative importance of habitat characteristics, plant size and plants traits in determining the degree of folivory. The study identified several defense traits able to explain differences in herbivory between species after accounting for differences in the habitats in which the species occur and the plant size. Specifically, the most important traits were traits related to the quality of the leaf tissue expressed as the content of phosphorus, water and specific leaf area, which suggests that the leaf quality had a more important effect on the degree of herbivory than the presence of specific defense mechanisms such as spines and hair. Leaf quality is thus a candidate factor that drives herbivore choice when selecting which plant to feed on and should be considered when assessing the danger that a herbivore will switch hosts when introduced to a new range. PMID:23717643

  14. Qualitative and quantitative analysis of specific polysaccharides in Dendrobium huoshanense by using saccharide mapping and chromatographic methods.

    PubMed

    Deng, Yong; Chen, Ling-Xiao; Han, Bang-Xing; Wu, Ding-Tao; Cheong, Kit-Leong; Chen, Nai-Fu; Zhao, Jing; Li, Shao-Ping

    2016-09-10

    Qualitative and quantitative analysis of specific polysaccharides from ten batches of Dendrobium huoshanense were performed using high performance size exclusion chromatography coupled with multi-angle laser light scattering and refractive index detector (HPSEC-MALLS-RID), gas chromatography-mass spectrometry (GC-MS), nuclear magnetic resonance (NMR) and saccharide mapping based on polysaccharides analysis by using carbohydrate gel electrophoresis (PACE) and high performance thin layer chromatography (HPTLC). Results showed that molecular weights, the radius of gyrations, and contents of specific polysaccharides in D. huoshanense were ranging from 1.16×10(5) to 2.17×10(5)Da, 38.8 to 52.1nm, and 9.9% to 19.9%, respectively. Furthermore, the main monosaccharide compositions were Man and Glc. Indeed, the main glycosidic linkages were β-1,4-Manp and β-1,4-Glcp, and substituted with acetyl groups at O-2 and O-3 of 1,4-linked Manp. Moreover, results showed that PACE and HPTLC fingerprints of partial acidic and enzymatic hydrolysates of specific polysaccharides were similar, which are helpful to better understand the specific polysaccharides in D. huoshanense and beneficial to improve their quality control. These approaches could also be routinely used for quality control of polysaccharides in other medicinal plants. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. [New idea of traditional Chinese medicine quality control based on "composition structure" theory].

    PubMed

    Liu, Dan; Jia, Xiaobin; Yu, Danhong

    2012-03-01

    On the road of the modern Chinese medicine developing internationally, there is a key issues that setting up a reasonable, accurate and be quantified quality evaluation system which is comply with the basic theory of Chinese medicine. Based on the overall understanding of the role of traditional Chinese medicine components, author suggested that the idea of "structural components" theory should be embedded into the system and thought the Chinese medicine play a multi-target, multi-channel pharmacodynamic effects founded on the specific microcosmic structural relationship between the components and the components within the group. At present, the way of Chinese pharmacopoeia checking the quality of Chinese medicine is mainly depends on controlling the single or multiple targets of ingredients. In fact, this way is out of the overall effectiveness of the Chinese medicine, so we can not thoroughly controlling the quality of Chinese medicine from the essence of the Chinese medicine. Secondly, it's only macro-structural quantity that the Chinese pharmacopoeia just controlling the less effective ingredients, this is not enough to reflect the internal microstructure of the integrity and systematic. In other words, this cannot reflect the structural components of the Chinese medicine (the essence of traditional Chinese medicine). In view of above mentioned reasons, the author propose the new idea on the quality control in the medicine that quantify the ratio structural relationship in component and the ingredients of the components, set the optimal controlling proportion between the components and ingredients. At the same time, author thought we should conduct the depth study in the micro-quantified the multi-component and multi-ingredient, in the process of studying the material basis of Chinese medicine. Therefore, it could establish a more rational basis for the Chinese medicine quality controlling system.

  16. A clinical data repository enhances hospital infection control.

    PubMed Central

    Samore, M.; Lichtenberg, D.; Saubermann, L.; Kawachi, C.; Carmeli, Y.

    1997-01-01

    We describe the benefits of a relational database of hospital clinical data (Clinical Data Repository; CDR) for an infection control program. The CDR consists of > 40 Sybase tables, and is directly accessible for ad hoc queries by members of the infection control unit who have been granted privileges for access by the Information Systems Department. The data elements and functional requirements most useful for surveillance of nosocomial infections, antibiotic use, and resistant organisms are characterized. Specific applications of the CDR are presented, including the use of automated definitions of nosocomial infection, graphical monitoring of resistant organisms with quality control limits, and prospective detection of inappropriate antibiotic use. Hospital surveillance and quality improvement activities are significantly benefited by the availability of a querable set of tables containing diverse clinical data. PMID:9357588

  17. Optimizing construction quality management of pavements using mechanistic performance analysis.

    DOT National Transportation Integrated Search

    2004-08-01

    This report presents a statistical-based algorithm that was developed to reconcile the results from several pavement performance models used in the state of practice with systematic process control techniques. These algorithms identify project-specif...

  18. How do memory and attention change with pregnancy and childbirth? A controlled longitudinal examination of neuropsychological functioning in pregnant and postpartum women.

    PubMed

    Logan, Dustin M; Hill, Kyle R; Jones, Rochelle; Holt-Lunstad, Julianne; Larson, Michael J

    2014-01-01

    Current literature on cognitive functioning in pregnancy and postpartum is mixed, with most research showing deficits in memory and attention during pregnancy or no difference between pregnant participants and controls with little emphasis on the postpartum period. In the current study, we used a longitudinal controlled design and 42 primarily not depressed participants to compare pregnant women in the third trimester and approximately three months postpartum with matched controls over the same time period on neuropsychological domains including memory, attention, learning, visuospatial, and executive functioning. We also evaluated the role of mood and quality of life as potential moderators of cognitive functioning in pregnancy/postpartum. Results indicated no differences between controls and pregnant/postpartum women on neuropsychological measures at any time points. Self-reported memory difficulties, however, were higher in the pregnant/postpartum women. Pregnant and postpartum women had worse self-reported mood and quality of life than controls. Mood and quality of life slightly moderated specific measures of attention and verbal fluency; however, neither mood nor quality of life moderated overall neuropsychological functioning in either group. Number of previous pregnancies had no effect on the study findings. Results suggest differences in subjective memory complaints, but no differences in objective neuropsychological test results between controls and pregnant/postpartum women who are primarily not diagnosed with depression.

  19. [The condition of the cardiovascular prevention in Spain].

    PubMed

    Royo-Bordonada, Miguel Ángel; Lobos, José Maria; Brotons, Carlos; Villar, Fernando; de Pablo, Carmen; Armario, Pedro; Cortés, Olga; Gil Nuñez, Antonio; Lizcano, Angel; de Santiago, Ana; Sans, Susana

    2014-01-07

    In Spain, where cardiovascular diseases are the leading cause of death, control of their risk factors is low. This study analyzes the implementation of cardiovascular risk (CVR) assessment in clinical practice and the existence of control objectives amongst quality care indicators and professional incentive systems. Between 2010 and 2011, data from each autonomous community were collected, by means of a specific questionnaire concerning prevalence and control of major CVR factors, CVR assessment, and implementation of control objectives amongst quality care indicators and primary care incentive systems. Fifteen out of 17 autonomous communities filled in the questionnaire. CVR was calculated through SCORE in 9 autonomous communities, REGICOR in 3 and Framingham in 3, covering 3.4 to 77.6% of target population. The resulting control of the main CVR factors was low and variable: hypertension (22.7-61.3%), dyslipidemia (11-45.1%), diabetes (18.5-84%) and smoking (20-50.5%). Most autonomous communities did not consider CVR assessment and control amongst quality care indicators or incentive systems, highlighting the lack of initiatives on lifestyles. Variability exists in cardiovascular prevention policies among autonomous communities. It is necessary to implement a common agreed cardiovascular prevention guide, to encourage physicians to implement CVR in electronic clinical history, and to promote CVR assessment and control inclusion amongst quality care indicators and professional incentive systems, focusing on lifestyles management. Copyright © 2012 Elsevier España, S.L. All rights reserved.

  20. Image-guided radiotherapy quality control: Statistical process control using image similarity metrics.

    PubMed

    Shiraishi, Satomi; Grams, Michael P; Fong de Los Santos, Luis E

    2018-05-01

    The purpose of this study was to demonstrate an objective quality control framework for the image review process. A total of 927 cone-beam computed tomography (CBCT) registrations were retrospectively analyzed for 33 bilateral head and neck cancer patients who received definitive radiotherapy. Two registration tracking volumes (RTVs) - cervical spine (C-spine) and mandible - were defined, within which a similarity metric was calculated and used as a registration quality tracking metric over the course of treatment. First, sensitivity to large misregistrations was analyzed for normalized cross-correlation (NCC) and mutual information (MI) in the context of statistical analysis. The distribution of metrics was obtained for displacements that varied according to a normal distribution with standard deviation of σ = 2 mm, and the detectability of displacements greater than 5 mm was investigated. Then, similarity metric control charts were created using a statistical process control (SPC) framework to objectively monitor the image registration and review process. Patient-specific control charts were created using NCC values from the first five fractions to set a patient-specific process capability limit. Population control charts were created using the average of the first five NCC values for all patients in the study. For each patient, the similarity metrics were calculated as a function of unidirectional translation, referred to as the effective displacement. Patient-specific action limits corresponding to 5 mm effective displacements were defined. Furthermore, effective displacements of the ten registrations with the lowest similarity metrics were compared with a three dimensional (3DoF) couch displacement required to align the anatomical landmarks. Normalized cross-correlation identified suboptimal registrations more effectively than MI within the framework of SPC. Deviations greater than 5 mm were detected at 2.8σ and 2.1σ from the mean for NCC and MI, respectively. Patient-specific control charts using NCC evaluated daily variation and identified statistically significant deviations. This study also showed that subjective evaluations of the images were not always consistent. Population control charts identified a patient whose tracking metrics were significantly lower than those of other patients. The patient-specific action limits identified registrations that warranted immediate evaluation by an expert. When effective displacements in the anterior-posterior direction were compared to 3DoF couch displacements, the agreement was ±1 mm for seven of 10 patients for both C-spine and mandible RTVs. Qualitative review alone of IGRT images can result in inconsistent feedback to the IGRT process. Registration tracking using NCC objectively identifies statistically significant deviations. When used in conjunction with the current image review process, this tool can assist in improving the safety and consistency of the IGRT process. © 2018 American Association of Physicists in Medicine.

  1. 75 FR 74517 - Approval and Promulgation of Implementation Plans; State of California; 2008 San Joaquin Valley...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-30

    ...EPA is proposing to approve in part and disapprove in part state implementation plan (SIP) revisions submitted by California to provide for attainment of the 1997 annual and 24-hour fine particulate matter (PM2.5) national ambient air quality standards (NAAQS) in the San Joaquin Valley (SJV) nonattainment area. The SIP revisions are the SJV 2008 PM2.5 Plan (revised 2010) and portions of the 2007 State Strategy (revised 2009). Specifically, EPA is proposing to approve the emissions inventories as meeting the requirements of the Clean Air Act and EPA's fine particle implementing rule and to approve commitments to implement specific measures and meet specific aggregate emissions reductions by the San Joaquin Valley Air Pollution Control District and the California Air Resource Board. In addition, we are proposing to find that volatile organic compounds are a PM2.5 attainment plan precursor in the SJV for which controls should be evaluated. EPA is proposing to disapprove the attainment demonstration. EPA is also proposing to disapprove the reasonably available control measures/reasonably available control technology demonstration, the air quality modeling, the reasonable further progress (RFP) demonstration, the contingency measures, and the attainment and RFP conformity motor vehicle emissions budgets. EPA is also proposing to not grant California's request to extend to April 5, 2015 the deadline for the SJV nonattainment area to attain the 1997 PM2.5 NAAQS.

  2. Sensory integration balance training in patients with multiple sclerosis: A randomized, controlled trial.

    PubMed

    Gandolfi, Marialuisa; Munari, Daniele; Geroin, Christian; Gajofatto, Alberto; Benedetti, Maria Donata; Midiri, Alessandro; Carla, Fontana; Picelli, Alessandro; Waldner, Andreas; Smania, Nicola

    2015-10-01

    Impaired sensory integration contributes to balance disorders in patients with multiple sclerosis (MS). The objective of this paper is to compare the effects of sensory integration balance training against conventional rehabilitation on balance disorders, the level of balance confidence perceived, quality of life, fatigue, frequency of falls, and sensory integration processing on a large sample of patients with MS. This single-blind, randomized, controlled trial involved 80 outpatients with MS (EDSS: 1.5-6.0) and subjective symptoms of balance disorders. The experimental group (n = 39) received specific training to improve central integration of afferent sensory inputs; the control group (n = 41) received conventional rehabilitation (15 treatment sessions of 50 minutes each). Before, after treatment, and at one month post-treatment, patients were evaluated by a blinded rater using the Berg Balance Scale (BBS), Activities-specific Balance Confidence Scale (ABC), Multiple Sclerosis Quality of Life-54, Fatigue Severity Scale (FSS), number of falls and the Sensory Organization Balance Test (SOT). The experimental training program produced greater improvements than the control group training on the BBS (p < 0.001), the FSS (p < 0.002), number of falls (p = 0.002) and SOT (p < 0.05). Specific training to improve central integration of afferent sensory inputs may ameliorate balance disorders in patients with MS. Clinical Trial Registration (NCT01040117). © The Author(s), 2015.

  3. Multileaf collimator performance monitoring and improvement using semiautomated quality control testing and statistical process control

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Létourneau, Daniel, E-mail: daniel.letourneau@rmp.uh.on.ca; McNiven, Andrea; Keller, Harald

    2014-12-15

    Purpose: High-quality radiation therapy using highly conformal dose distributions and image-guided techniques requires optimum machine delivery performance. In this work, a monitoring system for multileaf collimator (MLC) performance, integrating semiautomated MLC quality control (QC) tests and statistical process control tools, was developed. The MLC performance monitoring system was used for almost a year on two commercially available MLC models. Control charts were used to establish MLC performance and assess test frequency required to achieve a given level of performance. MLC-related interlocks and servicing events were recorded during the monitoring period and were investigated as indicators of MLC performance variations. Methods:more » The QC test developed as part of the MLC performance monitoring system uses 2D megavoltage images (acquired using an electronic portal imaging device) of 23 fields to determine the location of the leaves with respect to the radiation isocenter. The precision of the MLC performance monitoring QC test and the MLC itself was assessed by detecting the MLC leaf positions on 127 megavoltage images of a static field. After initial calibration, the MLC performance monitoring QC test was performed 3–4 times/week over a period of 10–11 months to monitor positional accuracy of individual leaves for two different MLC models. Analysis of test results was performed using individuals control charts per leaf with control limits computed based on the measurements as well as two sets of specifications of ±0.5 and ±1 mm. Out-of-specification and out-of-control leaves were automatically flagged by the monitoring system and reviewed monthly by physicists. MLC-related interlocks reported by the linear accelerator and servicing events were recorded to help identify potential causes of nonrandom MLC leaf positioning variations. Results: The precision of the MLC performance monitoring QC test and the MLC itself was within ±0.22 mm for most MLC leaves and the majority of the apparent leaf motion was attributed to beam spot displacements between irradiations. The MLC QC test was performed 193 and 162 times over the monitoring period for the studied units and recalibration had to be repeated up to three times on one of these units. For both units, rate of MLC interlocks was moderately associated with MLC servicing events. The strongest association with the MLC performance was observed between the MLC servicing events and the total number of out-of-control leaves. The average elapsed time for which the number of out-of-specification or out-of-control leaves was within a given performance threshold was computed and used to assess adequacy of MLC test frequency. Conclusions: A MLC performance monitoring system has been developed and implemented to acquire high-quality QC data at high frequency. This is enabled by the relatively short acquisition time for the images and automatic image analysis. The monitoring system was also used to record and track the rate of MLC-related interlocks and servicing events. MLC performances for two commercially available MLC models have been assessed and the results support monthly test frequency for widely accepted ±1 mm specifications. Higher QC test frequency is however required to maintain tighter specification and in-control behavior.« less

  4. Oromucosal film preparations: classification and characterization methods.

    PubMed

    Preis, Maren; Woertz, Christina; Kleinebudde, Peter; Breitkreutz, Jörg

    2013-09-01

    Recently, the regulatory authorities have enlarged the variety of 'oromucosal preparations' by buccal films and orodispersible films. Various film preparations have entered the market and pharmacopoeias. Due to the novelty of the official monographs, no standardized characterization methods and quality specifications are included. This review reports the methods of choice to characterize oromucosal film preparations with respect to biorelevant characterization and quality control. Commonly used dissolution tests for other dosage forms are not transferable for films in all cases. Alternatives and guidance on decision, which methods are favorable for film preparations are discussed. Furthermore, issues about requirements for film dosage forms are reflected. Oromucosal film preparations offer a wide spectrum of opportunities. There are a lot of suggestions in the literature on how to control the quality of these innovative products, but no standardized tests are available. Regulatory authorities need to define the standards and quality requirements more precisely.

  5. Air quality assessment in Delhi: before and after CNG as fuel.

    PubMed

    Chelani, Asha B; Devotta, Sukumar

    2007-02-01

    A number of policy measures have been activated in India in order to control the levels of air pollutants such as particulate matter, sulphur dioxide (SO(2)) and nitrogen dioxide (NO(2)). Delhi, which is one of the most polluted cities in the world, is also going through the implementation phase of the control policies. Ambient air quality data monitored during 2000 to 2003, at 10 sites in Delhi, were analyzed to assess the impact of implementation of these measures, specifically fuel change in vehicles. This paper presents the impact of policy measures on ambient air quality levels and also the source apportionment. CO and NO(2) concentration levels in ambient air are found to be associated with the mobile sources. The temporal variation of air quality data shows the significant effect of shift to CNG (Compressed Natural Gas) in vehicles.

  6. Water-Quality Data for Selected Stream Sites in Bridgeport Valley, Mono County, California, April 2000 to June 2003

    USGS Publications Warehouse

    Rockwell, Gerald L.; Honeywell, Paul D.

    2004-01-01

    The U.S. Geological Survey, in cooperation with the California Regional Water Quality Control Board, Lahonton Region, carried out a water-quality data collection program of selected streams in and near Bridgeport Valley, California, during April 2000 to June 2003. These data were collected to provide information used by the California Regional Water Quality Control Board to develop total maximum daily load standards. Field measurements of streamflow, barometric pressure, dissolved oxygen, pH, specific conductance, and water temperature were made at 15 sites located on 6 streams. Water samples were analyzed for nutrients, major ions, turbidity, fecal coliform, fecal streptococci, and suspended sediment. Field data, turbidity, nutrient, major ion, and sediment concentrations and fecal coliform and fecal streptococci densities are given in tables for each site. Field blank data are also presented in a table.

  7. [Designing and implementation of a web-based quality monitoring system for plasma glucose measurement in multicenter population study].

    PubMed

    Liu, Yong; Wang, Limin; Pang, Richard; Mo, Nanxun; Hu, Yan; Deng, Qian; Hu, Zhaohui

    2015-05-01

    The aim of this paper is to describe the designing and implementation of a web-based plasma glucose measurement quality monitoring system to assess the analytical quality of plasma glucose measurements in multicenter population study and provide evidence for the future studies. In the chronic non-communicable disease and related factor surveillance in China, a web based quality monitoring system for plasma glucose measurement was established to conduct evaluation on plasma glucose monitoring quality and effectiveness in 302 surveillance centers, including quality control data entry, transmission and feedback. The majority of the surveillance centers met the quality requirements and passed the evaluation of reproducibility and precision of plasma glucose measurement, only a few centers required intensive training and re-assessment. In order to ensure the completeness and reliability of plasma glucose measurement in the surveillance centers, the establishment of web-based plasma glucose measurement quality control system can facilitate the identification of the qualified surveillance centers and evaluation of plasma glucose measurement quality in different regions. Communication and training are important in ensuring plasma glucose measurement quality. It is necessary to further improve this web-based plasma glucose measurement quality monitoring system in the future to reduce the method specific plasma glucose measurement bias.

  8. The transcriptional repressor Sum1p counteracts Sir2p in regulation of the actin cytoskeleton, mitochondrial quality control and replicative lifespan in Saccharomyces cerevisiae.

    PubMed

    Higuchi-Sanabria, Ryo; Vevea, Jason D; Charalel, Joseph K; Sapar, Maria L; Pon, Liza A

    2016-01-18

    Increasing the stability or dynamics of the actin cytoskeleton can extend lifespan in C. elegans and S. cerevisiae . Actin cables of budding yeast, bundles of actin filaments that mediate cargo transport, affect lifespan control through effects on mitochondrial quality control. Sir2p, the founding member of the Sirtuin family of lifespan regulators, also affects actin cable dynamics, assembly, and function in mitochondrial quality control. Here, we obtained evidence for novel interactions between Sir2p and Sum1p, a transcriptional repressor that was originally identified through mutations that genetically suppress sir2 ∆ phenotypes unrelated to lifespan. We find that deletion of SUM1 in wild-type cells results in increased mitochondrial function and actin cable abundance. Furthermore, deletion of SUM1 suppresses defects in actin cables and mitochondria of sir2 ∆ yeast, and extends the replicative lifespan and cellular health span of sir2 ∆ cells. Thus, Sum1p suppresses Sir2p function in control of specific aging determinants and lifespan in budding yeast.

  9. A simulation investigation of the effects of engine-and thrust-response characteristics on helicopter handling qualities

    NASA Technical Reports Server (NTRS)

    Corless, L. D.; Blanken, C. L.

    1983-01-01

    A multi-phase program is being conducted to study, in a generic sense and through ground simulation, the effects of engine response, rotor inertia, rpm control, excess power, and vertical damping on specific maneuvers included in nap-of-the-Earth (NOE) operations. The helicopter configuration with an rpm-governed gas-turbine engine are considered. Handling-qualities-criteria data are considered in light of aspects peculiar to rotary-wing and NOE operations. The results of three moving-based piloted simulation studies are summarized and the frequency, characteristics of the helicopter thrust response which set it apart from other VTOL types are explained. Power-system response is affected by both the engine-governor response and the level of rotor inertia. However, results indicate that with unlimited power, variations in engine response can have a significant effect on pilot rating, whereas changes in rotor inertia, in general, do not. The results also show that any pilot interaction required to maintain proper control can significantly degrade handling qualities. Data for variations in vertical damping and collective sensitivity are compared with existing handling-qualities specifications, MIL-F-83300 and AGARD 577, and show a need for higher minimums for both damping and sensitivity for the bob-up task. Results for cases of limited power are also shown.

  10. Water quality, hydrology, and the effects of changes in phosphorus loading to Pike Lake, Washington County, Wisconsin, with special emphasis on inlet-to-outlet short-circuiting

    USGS Publications Warehouse

    Rose, William J.; Robertson, Dale M.; Mergener, Elizabeth A.

    2004-01-01

    Simulations using water-quality models within the Wisconsin Lake Model Suite (WiLMS) indicated Pike Lake's response to 13 different phosphorus-loading scenarios. These scenarios included a base 'normal' year (2000) for which lake water quality and loading were known, six different percentage increases or decreases in phosphorus loading from controllable sources, and six different loading scenarios corresponding to specific management actions. Model simulations indicate that a 50-percent reduction in controllable loading sources would be needed to achieve a mesotrophic classification with respect to phosphorus, chlorophyll a, and Secchi depth (an index of water clarity). Model simulations indicated that short-circuiting of phosphorus from the inlet to the outlet was the main reason the water quality of the lake is good relative to the amount of loading from the Rubicon River and that changes in the percentage of inlet-to-outlet short-circuiting have a significant influence on the water quality of the lake.

  11. How balance task-specific training contributes to improving physical function in older subjects undergoing rehabilitation following hip fracture: a randomized controlled trial.

    PubMed

    Monticone, Marco; Ambrosini, Emilia; Brunati, Roberto; Capone, Antonio; Pagliari, Giulia; Secci, Claudio; Zatti, Giovanni; Ferrante, Simona

    2018-03-01

    To evaluate the efficacy of a rehabilitation programme including balance task-specific training in improving physical function, pain, activities of daily living (ADL), balance and quality of life in subjects after a hip fracture. Randomized controlled trial. A total of 52 older subjects selected for internal fixation due to extra-capsular hip fracture were randomized to be included in an experimental ( n = 26) and control group ( n = 26). The experimental group underwent a rehabilitation programme based on balance task-specific training. The control group underwent general physiotherapy, including open kinetic chain exercises and walking training. Both groups individually followed programmes of 90-minute sessions five times/week for three weeks. The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), a Pain Numerical Rating Scale, the Berg Balance Scale, the Functional Independence Measure and the 36-item Short-Form Health Survey. The participants were evaluated before and after training, and after 12 months. Significant effects of time, group and time × group were found for all outcome measures in favour of the experimental group. A clinically important between-group difference of 25 points was achieved after training and at follow-up in terms of the primary outcome (WOMAC function before treatment, after treatment and at follow-up was 84.8 (3.7), 39.8 (4.9) and 35.7 (6.2) for the experimental group and 80.9 (5.7), 65.2 (7.1) and 61.0 (11.1) for the control group). An inpatient rehabilitation programme based on balance task-specific training is useful in improving physical function, pain, ADL and quality of life in older patients after hip fracture.

  12. Chest CT in children: anesthesia and atelectasis.

    PubMed

    Newman, Beverley; Krane, Elliot J; Gawande, Rakhee; Holmes, Tyson H; Robinson, Terry E

    2014-02-01

    There has been an increasing tendency for anesthesiologists to be responsible for providing sedation or anesthesia during chest CT imaging in young children. Anesthesia-related atelectasis noted on chest CT imaging has proven to be a common and troublesome problem, affecting image quality and diagnostic sensitivity. To evaluate the safety and effectiveness of a standardized anesthesia, lung recruitment, controlled-ventilation technique developed at our institution to prevent atelectasis for chest CT imaging in young children. Fifty-six chest CT scans were obtained in 42 children using a research-based intubation, lung recruitment and controlled-ventilation CT scanning protocol. These studies were compared with 70 non-protocolized chest CT scans under anesthesia taken from 18 of the same children, who were tested at different times, without the specific lung recruitment and controlled-ventilation technique. Two radiology readers scored all inspiratory chest CT scans for overall CT quality and atelectasis. Detailed cardiorespiratory parameters were evaluated at baseline, and during recruitment and inspiratory imaging on 21 controlled-ventilation cases and 8 control cases. Significant differences were noted between groups for both quality and atelectasis scores with optimal scoring demonstrated in the controlled-ventilation cases where 70% were rated very good to excellent quality scans compared with only 24% of non-protocol cases. There was no or minimal atelectasis in 48% of the controlled ventilation cases compared to 51% of non-protocol cases with segmental, multisegmental or lobar atelectasis present. No significant difference in cardiorespiratory parameters was found between controlled ventilation and other chest CT cases and no procedure-related adverse events occurred. Controlled-ventilation infant CT scanning under general anesthesia, utilizing intubation and recruitment maneuvers followed by chest CT scans, appears to be a safe and effective method to obtain reliable and reproducible high-quality, motion-free chest CT images in children.

  13. Outpatient management of childhood asthma by paediatrician or asthma nurse: randomised controlled study with one year follow up

    PubMed Central

    Kamps, A; Brand, P; Kimpen, J; Maille, A; de G. Overgoor-van; van Helsdingen-Pe..., L C J A M; Roorda, R

    2003-01-01

    Methods: Seventy four children referred because of insufficient control of persistent asthma were randomly allocated to 1 year follow up by a paediatrician or asthma nurse. The main outcome measure was the percentage of symptom-free days. Additional outcome measures were airway hyperresponsiveness, lung function, daily dose of inhaled corticosteroids (ICS), number of exacerbations, number of additional visits to the general practitioner, absence from school, functional health status, and disease specific quality of life. Results: There were no significant differences at the end of the 1 year study period between the two treatment groups in percentage of symptom-free days (mean difference 2.5%; 95% CI -8.8 to 13.8), airway hyperresponsiveness (log10 PD20 0.06; -0.19 to 0.32), functional health status (10.1; -0.3 to 19.8), disease specific quality of life of patients (0.08; -0.9 to 0.7), and disease specific quality of life of caregivers (0.09; -0.2 to 0.3), nor in any other outcome parameters. Most outcome parameters improved considerably over the 1 year study period. These improvements were achieved although the daily dose of ICS was reduced by a mean of 26% compared with the dose received by children at referral. All parents were satisfied with the asthma care received. Conclusions: After initial assessment in a multidisciplinary clinic, childhood asthma can be successfully managed by an asthma nurse in close cooperation with a paediatrician. During close follow up by paediatrician or asthma nurse, asthma control improved despite a reduction in ICS dose. PMID:14586050

  14. National continuous surveys on internal quality control for HbA1c in 306 clinical laboratories of China from 2012 to 2016: Continual improvement.

    PubMed

    Li, Tingting; Wang, Wei; Zhao, Haijian; He, Falin; Zhong, Kun; Yuan, Shuai; Wang, Zhiguo

    2017-09-01

    This study aimed to evaluate whether the quality performance of clinical laboratories in China has been greatly improved and whether Internal Quality Control (IQC) practice of HbA1c has also been changed since National Center for Clinical Laboratories (NCCL) of China organized laboratories to report IQC data for HbA1c in 2012. Internal Quality Control information of 306 External Quality Assessment (EQA) participant laboratories which kept reporting IQC data in February from 2012 to 2016 were collected by Web-based EQA system. Then percentages of laboratories meeting four different imprecision specifications for current coefficient of variations (CVs) of HbA1c measurements were calculated. Finally, we comprehensively analyzed analytical systems and IQC practice of HbA1c measurements. The current CVs of HbA1c tests have decreased significantly from 2012 to 2016. And percentages of laboratories meeting four imprecision specifications for CVs all showed the increasing tendency year by year. As for analytical system, 52.1% (159/306) laboratories changed their systems with the change in principle of assay. And many laboratories began to use cation exchange high-performance liquid chromatography (CE-HPLC) instead of Immunoturbidimetry, because CE-HPLC owed a lower intra-laboratory CVs. The data of IQC practice, such as IQC rules and frequency, also showed significant variability among years with overall tendency of meeting requirements. The imprecision performance of HbA1c tests has been improved in these 5 years with the change in IQC practice, but it is still disappointing in China. Therefore, laboratories should actively find existing problems and take action to promote performance of HbA1c measurements. © 2016 Wiley Periodicals, Inc.

  15. Fault-Tolerant Control of ANPC Three-Level Inverter Based on Order-Reduction Optimal Control Strategy under Multi-Device Open-Circuit Fault.

    PubMed

    Xu, Shi-Zhou; Wang, Chun-Jie; Lin, Fang-Li; Li, Shi-Xiang

    2017-10-31

    The multi-device open-circuit fault is a common fault of ANPC (Active Neutral-Point Clamped) three-level inverter and effect the operation stability of the whole system. To improve the operation stability, this paper summarized the main solutions currently firstly and analyzed all the possible states of multi-device open-circuit fault. Secondly, an order-reduction optimal control strategy was proposed under multi-device open-circuit fault to realize fault-tolerant control based on the topology and control requirement of ANPC three-level inverter and operation stability. This control strategy can solve the faults with different operation states, and can works in order-reduction state under specific open-circuit faults with specific combined devices, which sacrifices the control quality to obtain the stability priority control. Finally, the simulation and experiment proved the effectiveness of the proposed strategy.

  16. Quality of life, mental health and self-esteem in hirsute adolescent females.

    PubMed

    Drosdzol, Agnieszka; Skrzypulec, Violetta; Plinta, Ryszard

    2010-09-01

    The aim of the study was to evaluate the influence of hirsutism on general quality of life, self-esteem and the prevalence of anxiety and depressive symptoms among adolescent girls. Fifty adolescent females with hirsutism, aged 13-18 years, were enrolled in the research group. The control group comprised 50 non-hirsute adolescents. A specific questionnaire was used as the research tool. It included self-evaluation inventories: Short Form-36 Health Survey Version 2, Hospital Anxiety and Depression Scale and Rosenberg Self-Esteem Scale. Quality of life indices for hirsute girls scored lower than for the controls and statistically significantly so with regard to physical functioning (p = 0.04), general health (p = 0.002) and social functioning (p = 0.007). Anxiety was diagnosed in 26% in the group of hirsute girls as compared with 10% of the controls (p = 0.03). The study analysis revealed more clinically significant problems of low self-esteem in hirsute adolescents compared with non-hirsute girls (14% vs. 2%). Hirsutism is associated with a decreased quality of life, a higher prevalence of anxiety disorder and lower self-esteem in adolescent females. The mother's level of education is associated with the quality of life in adolescent girls.

  17. Nuevo Amanecer: results of a randomized controlled trial of a community-based, peer-delivered stress management intervention to improve quality of life in Latinas with breast cancer.

    PubMed

    Nápoles, Anna María; Ortíz, Carmen; Santoyo-Olsson, Jasmine; Stewart, Anita L; Gregorich, Steven; Lee, Howard E; Durón, Ysabel; McGuire, Peggy; Luce, Judith

    2015-07-01

    We evaluated a community-based, translational stress management program to improve health-related quality of life in Spanish-speaking Latinas with breast cancer. We adapted a cognitive-behavioral stress management program integrating evidence-based and community best practices to address the needs of Latinas with breast cancer. Spanish-speaking Latinas with breast cancer were randomly assigned to an intervention or usual-care control group. Trained peers delivered the 8-week intervention between February 2011 and February 2014. Primary outcomes were breast cancer-specific quality of life and distress, and general symptoms of distress. Of 151 participants, 95% were retained at 6 months (between May 2011 and May 2014). Improvements in quality of life from baseline to 6 months were greater for the intervention than the control group on physical well-being, emotional well-being, breast cancer concerns, and overall quality of life. Decreases from baseline to 6 months were greater for the intervention group on depression and somatization. Results suggest that translation of evidence-based programs can reduce psychosocial health disparities in Latinas with breast cancer. Integration of this program into community-based organizations enhances its dissemination potential.

  18. Effectiveness of a Voice Training Program for Student Teachers on Vocal Health.

    PubMed

    Richter, Bernhard; Nusseck, Manfred; Spahn, Claudia; Echternach, Matthias

    2016-07-01

    The effectiveness of a preventive training program on vocal health for German student teachers was investigated on specific vocal parameters. The voice quality as described by the Dysphonia Severity Index of 204 student teachers (training group: n = 123; control group: n = 81) was measured at the beginning and at the end of the student teachers training period (duration 1.5 years). Additionally, for investigating the voice-carrying capacity, a vocal loading test (VLT) was performed. Finally, participants had to provide a subjective judgment of a possible Voice Handicap Index. The training program improved the voice quality of the trained group compared with that of the control group, whose voice quality declined. The trained group was also able to better sustain their voice quality across the VLT than the control group. Both groups, however, reported a similar increase in subjective vocal strain. The presented training program clearly showed a positive impact on the voice quality and the vocal capacity. The results maintain the importance of such a training program to be integrated in the education and occupational routine of teachers. Copyright © 2016 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  19. Problem-Solving Therapy During Outpatient Stroke Rehabilitation Improves Coping and Health-Related Quality of Life: Randomized Controlled Trial.

    PubMed

    Visser, Marieke M; Heijenbrok-Kal, Majanka H; Van't Spijker, Adriaan; Lannoo, Engelien; Busschbach, Jan J V; Ribbers, Gerard M

    2016-01-01

    This study investigated whether problem-solving therapy (PST) is an effective group intervention for improving coping strategy and health-related quality of life (HRQoL) in patients with stroke. In this multicenter randomized controlled trial, the intervention group received PST as add-on to standard outpatient rehabilitation, the control group received outpatient rehabilitation only. Measurements were performed at baseline, directly after the intervention, and 6 and 12 months later. Data were analyzed using linear-mixed models. Primary outcomes were task-oriented coping as measured by the Coping Inventory for Stressful Situations and psychosocial HRQoL as measured by the Stroke-Specific Quality of Life Scale. Secondary outcomes were the EuroQol EQ-5D-5L utility score, emotion-oriented and avoidant coping as measured by the Coping Inventory for Stressful Situations, problem-solving skills as measured by the Social Problem Solving Inventory-Revised, and depression as measured by the Center for Epidemiological Studies Depression Scale. Included were 166 patients with stroke, mean age 53.06 years (SD, 10.19), 53% men, median time poststroke 7.29 months (interquartile range, 4.90-10.61 months). Six months post intervention, the PST group showed significant improvement when compared with the control group in task-oriented coping (P=0.008), but not stroke-specific psychosocial HRQoL. Furthermore, avoidant coping (P=0.039) and the utility value for general HRQoL (P=0.034) improved more in the PST group than in the control after 6 months. PST seems to improve task-oriented coping but not disease-specific psychosocial HRQoL after stroke >6-month follow-up. Furthermore, we found indications that PST may improve generic HRQoL recovery and avoidant coping. URL: http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=2509. Unique identifier: CNTR2509. © 2015 American Heart Association, Inc.

  20. Qualitative features of the HIV-specific CD8+ T-cell response associated with immunologic control.

    PubMed

    Hersperger, Adam R; Migueles, Stephen A; Betts, Michael R; Connors, Mark

    2011-05-01

    Over the past 2 years, a clearer picture has emerged regarding the properties of HIV-specific CD8+ T cells associated with immunologic control of HIV replication. These properties represent a potential mechanism by which rare patients might control HIV replication in the absence of antiretroviral therapy. This review addresses the background and recent findings that have lead to our current understanding of these mechanism(s). Patients with immunologic control of HIV are not distinguished by targeted specificities, or greater numbers or breadth of their HIV-specific CD8+ T-cell response. For this reason, recent work has focused greater attention on qualitative features of this response. The qualitative features most closely associated with immunologic control of HIV are related to the granule-exocytosis-mediated elimination of HIV-infected CD4 T cells. The ability of HIV-specific CD8+ T cells to increase their contents of proteins known to mediate cytotoxicity, such as granzyme B and perforin, appears to be a critical means by which HIV-specific cytotoxic capacity is regulated. Investigation from multiple groups has now focused upon HIV-specific CD8+ T-cell granule-exocytosis-mediated cytotoxicity as a correlate of immunologic control of HIV. In the near future, a more detailed understanding of the qualities associated with immunologic control may provide critical insights regarding the necessary features of a response that should be stimulated by immunotherapies or T-cell-based vaccines.

  1. Effects of a sitting boxing program on upper limb function, balance, gait, and quality of life in stroke patients.

    PubMed

    Park, Junhyuck; Gong, Jihwan; Yim, Jongeun

    2017-01-01

    Boxing training including traditional stretching, muscular strength training, and duration training would be considered to be effective for improved functional stretching, dynamic balance, walking speed, and quality of life. We aimed to investigate upper limb function, balance, gait, and quality of life in stroke patients before and after a sitting boxing program. Twenty-six participants were randomly allocated to a boxing group (n = 13) and control group (n = 13) after the upper limb function, balance, gait, and quality of Life were recorded. The boxing group underwent a sitting boxing program (3 times/week) as well as conventional physical therapy (3 times/week) for 6 weeks. The control group only underwent conventional physical therapy (3 times/week) for 6 weeks. The Manual Functional Test (MFT), non-affected hand grip, Berg Balance Scale (BBS), velocity moment with eye opened, 10-m Walk Test (10 MWT), and Stroke-Specific Quality of Life questionnaire (SS-QOL) were significantly improved in the boxing group (p < 0.05) and showed significantly greater improvements in the boxing group compared to the control group (p < 0.05) after 6 weeks. The sitting boxing program group had positive effects on upper extremity function, balance, gait, and quality of life in stroke patients.

  2. State-of-the-art in asphalt pavement specifications

    DOT National Transportation Integrated Search

    1984-07-01

    The great increase in highway construction beginning in the 1950's made evident the need for better control of materials .and construction. A comprehensive research and development program was begun to use statistical methods for quality assurance in...

  3. Green Roofs for Stormwater Runoff Control - Abstract

    EPA Science Inventory

    This project evaluated green roofs as a stormwater management tool. Specifically, runoff quantity and quality from green and flat asphalt roofs were compared. Evapotranspiration from planted green roofs and evaporation from unplanted media roofs were also compared. The influence...

  4. Green Roofs for Stormwater Runoff Control

    EPA Science Inventory

    This project evaluated green roofs as a stormwater management tool. Specifically, runoff quantity and quality from green and flat asphalt roofs were compared. Evapotranspiration from planted green roofs and evaporation from unplanted media roofs were also compared. The influence...

  5. Quality of Diabetes Care: The Challenges of an Increasing Epidemic in Mexico. Results from Two National Health Surveys (2006 and 2012)

    PubMed Central

    Flores-Hernández, Sergio; Saturno-Hernández, Pedro J.; Reyes-Morales, Hortensia; Barrientos-Gutiérrez, Tonatiuh; Villalpando, Salvador; Hernández-Ávila, Mauricio

    2015-01-01

    Background The quality of diabetes care remains suboptimal according to numerous studies assessing the achievement of quality indicators for diabetes care in various healthcare settings. We report about global and specific quality indicators for diabetes care and their association to glycemic control at the population level in two national health surveys in Mexico. Methods We conducted a cross-sectional analysis of the 2006 and 2012 National Health Surveys in Mexico. We examined quality of care for 2,965 and 4,483 adults (≥ 20 years) with diagnosed type 2 diabetes using fourteen simple and two composite indicators derived from self-reported information. In a subsample for both surveys, glycated hemoglobin (HbA1c) was measured at the time of the interview. We obtained survey weight-adjusted estimators using multiple regression models (logistic and linear) with combined data files, including survey year as covariate to assess change. Results Global quality of care in 2012 was 40.8%, with a relative improvement of 11.7% between 2006 and 2012. Detections of cardiovascular disease risk factors (dyslipidemia and hypertension) were the indicators with the highest improvement, while non-pharmaceutical treatment and diabetic foot exams showed minor changes. We found a significant association between the quality of the process of diabetes care and glycemic control (OR 2.53, 95% CI 1.63-3.94). Age more than 65 years old, the type of health subsystem, gender (males), and high socio-economic status were also significantly associated to glycemic control. Conclusions Quality diabetes care and glycemic control improved and are significantly associated. However, according to international standards, the current situation remains suboptimal. A more holistic approach is needed, with an emphasis on improving quality in outpatient care. PMID:26230991

  6. Quality of Diabetes Care: The Challenges of an Increasing Epidemic in Mexico. Results from Two National Health Surveys (2006 and 2012).

    PubMed

    Flores-Hernández, Sergio; Saturno-Hernández, Pedro J; Reyes-Morales, Hortensia; Barrientos-Gutiérrez, Tonatiuh; Villalpando, Salvador; Hernández-Ávila, Mauricio

    2015-01-01

    The quality of diabetes care remains suboptimal according to numerous studies assessing the achievement of quality indicators for diabetes care in various healthcare settings. We report about global and specific quality indicators for diabetes care and their association to glycemic control at the population level in two national health surveys in Mexico. We conducted a cross-sectional analysis of the 2006 and 2012 National Health Surveys in Mexico. We examined quality of care for 2,965 and 4,483 adults (≥ 20 years) with diagnosed type 2 diabetes using fourteen simple and two composite indicators derived from self-reported information. In a subsample for both surveys, glycated hemoglobin (HbA1c) was measured at the time of the interview. We obtained survey weight-adjusted estimators using multiple regression models (logistic and linear) with combined data files, including survey year as covariate to assess change. Global quality of care in 2012 was 40.8%, with a relative improvement of 11.7% between 2006 and 2012. Detections of cardiovascular disease risk factors (dyslipidemia and hypertension) were the indicators with the highest improvement, while non-pharmaceutical treatment and diabetic foot exams showed minor changes. We found a significant association between the quality of the process of diabetes care and glycemic control (OR 2.53, 95% CI 1.63-3.94). Age more than 65 years old, the type of health subsystem, gender (males), and high socio-economic status were also significantly associated to glycemic control. Quality diabetes care and glycemic control improved and are significantly associated. However, according to international standards, the current situation remains suboptimal. A more holistic approach is needed, with an emphasis on improving quality in outpatient care.

  7. Presumptive Sources of Fecal Contamination in Four Tributaries to the New River Gorge National River, West Virginia, 2004

    USGS Publications Warehouse

    Mathes, Melvin V.; O'Brien, Tara L.; Strickler, Kriston M.; Hardy, Joshua J.; Schill, William B.; Lukasik, Jerzy; Scott, Troy M.; Bailey, David E.; Fenger, Terry L.

    2007-01-01

    Several methods were used to determine the sources of fecal contamination in water samples collected during September and October 2004 from four tributaries to the New River Gorge National River -- Arbuckle Creek, Dunloup Creek, Keeney Creek, and Wolf Creek. All four tributaries historically have had elevated levels of fecal coliform bacteria. The source-tracking methods used yielded various results, possibly because one or more methods failed. Sourcing methods used in this study included the detection of several human-specific and animal-specific biological or molecular markers, and library-dependent pulsed-field gel electrophoresis analysis that attempted to associate Escherichia coli bacteria obtained from water samples with animal sources by matching DNA-fragment banding patterns. Evaluation of the results of quality-control analysis indicated that pulsed-field gel electrophoresis analysis was unable to identify known-source bacteria isolates. Increasing the size of the known-source library did not improve the results for quality-control samples. A number of emerging methods, using markers in Enterococcus, human urine, Bacteroidetes, and host mitochondrial DNA, demonstrated some potential in associating fecal contamination with human or animal sources in a limited analysis of quality-control samples. All four of the human-specific markers were detected in water samples from Keeney Creek, a watershed with no centralized municipal wastewater-treatment facilities, thus indicating human sources of fecal contamination. The human-specific Bacteroidetes and host mitochondrial DNA markers were detected in water samples from Dunloup Creek, Wolf Creek, and to a lesser degree Arbuckle Creek. Results of analysis for wastewater compounds indicate that the September 27 sample from Arbuckle Creek contained numerous human tracer compounds likely from sewage. Dog, horse, chicken, and pig host mitochondrial DNA were detected in some of the water samples with the exception of the October 5 sample from Dunloup Creek. Cow, white-tailed deer, and Canada goose DNA were not detected in any of the samples collected from the four tributaries, despite the presence of these animals in the watersheds. Future studies with more rigorous quality-control analyses are needed to investigate the potential applicability and use of these emerging methods. Because many of the detections for the various methods could vary over time and with flow conditions, repeated sampling during both base flow and storm events would be necessary to more definitively determine the sources of fecal contamination for each watershed.

  8. Structure and content components of self-management interventions that improve health-related quality of life in people with inflammatory bowel disease: a systematic review, meta-analysis and meta-regression.

    PubMed

    Tu, Wenjing; Xu, Guihua; Du, Shizheng

    2015-10-01

    The purpose of this review was to identify and categorise the components of the content and structure of effective self-management interventions for patients with inflammatory bowel disease. Inflammatory bowel diseases are chronic gastrointestinal disorders impacting health-related quality of life. Although the efficacy of self-management interventions has been demonstrated in previous studies, the most effective components of the content and structure of these interventions remain unknown. A systematic review, meta-analysis and meta-regression of randomised controlled trials was used. A systematic search of six electronic databases, including Pubmed, Embase, Cochrane central register of controlled trials, Web of Science, Cumulative Index of Nursing and Allied Health Literature and Chinese Biomedical Literature Database, was conducted. Content analysis was used to categorise the components of the content and structure of effective self-management interventions for inflammatory bowel disease. Clinically important and statistically significant beneficial effects on health-related quality of life were explored, by comparing the association between effect sizes and various components of self-management interventions such as the presence or absence of specific content and different delivery methods. Fifteen randomised controlled trials were included in this review. Distance or remote self-management interventions demonstrated a larger effect size. However, there is no evidence for a positive effect associated with specific content component of self-management interventions in adult patients with inflammatory bowel disease in general. The results showed that self-management interventions have positive effects on health-related quality of life in patients with inflammatory bowel disease, and distance or remote self-management programmes had better outcomes than other types of interventions. This review provides useful information to clinician and researchers when determining components of effective self-management programmes for patients with inflammatory bowel disease. More high-quality randomised controlled trials are needed to test the results. © 2015 John Wiley & Sons Ltd.

  9. Quality of life and discriminating power of two questionnaires in fibromyalgia patients: Fibromyalgia Impact Questionnaire and Medical Outcomes Study 36-Item Short-Form Health Survey.

    PubMed

    Assumpção, Ana; Pagano, Tatiana; Matsutani, Luciana A; Ferreira, Elizabeth A G; Pereira, Carlos A B; Marques, Amélia P

    2010-01-01

    Fibromyalgia is a painful syndrome characterized by widespread chronic pain and associated symptoms with a negative impact on quality of life. Considering the subjectivity of quality of life measurements, the aim of this study was to verify the discriminating power of two quality of life questionnaires in patients with fibromyalgia: the generic Medical Outcomes Study 36-Item Short-Form Health Survey (SF-36) and the specific Fibromyalgia Impact Questionnaire (FIQ). A cross-sectional study was conducted on 150 participants divided into Fibromyalgia Group (FG) and Control Group (CG) (n=75 in each group). The participants were evaluated using the SF-36 and the FIQ. The data were analyzed by the Student t-test (α=0.05) and inferential analysis using the Receiver Operating Characteristics (ROC) Curve--sensitivity, specificity and area under the curve (AUC). The significance level was 0.05. The sample was similar for age (CG: 47.8 ± 8.1; FG: 47.0 ± 7.7 years). A significant difference was observed in quality of life assessment in all aspects of both questionnaires (p<0.05). Higher sensibility, specificity and AUC were obtained by the FIQ (96%, 96%, 0.985, respectively), followed by the SF-36 (88%, 89% and 0.948 AUC). The FIQ presented the highest sensibility, specificity and AUC showing the most discriminating power. However the SF-36 is also a good instrument to assess quality of life in fibromyalgia patients, and we suggest that both should be used in parallel because they evaluate relevant and complementary aspects of quality of life.

  10. Pectus excavatum and pectus carinatum patients suffer from lower quality of life and impaired body image: a control group comparison of psychological characteristics prior to surgical correction.

    PubMed

    Steinmann, Cornelia; Krille, Stefanie; Mueller, Astrid; Weber, Peter; Reingruber, Bertram; Martin, Alexandra

    2011-11-01

    The aim of this study was to evaluate the effects of anterior chest-wall deformities on disease-specific and health-related quality of life, body image, and psychiatric comorbidity prior to surgical correction. A total of 90 patients (71 with pectus excavatum, 19 with pectus carinatum) presenting themselves for pectus repair and 82 control subjects were recruited for this study. The objective severity of the deformity was determined through the funnel-chest index by Hümmer and the Haller index. Disease-specific quality of life was measured with the Nuss Questionnaire modified for Adults (NQ-mA) and health-related quality of life was determined by the Short-Form-36 Health Survey (SF-36). Body image was assessed via the Body Image Questionnaire (FKB-20), the Dysmorphic Concern Questionnaire (DCQ), and a self-evaluation of the subjective impairment of the appearance. The Diagnostic Interview for Mental Disorders - Short Version (Mini-DIPS), the General Depression Scale (Allgemeine Depressionsskala, ADS), and a self-rating of self-esteem were used to evaluate general psychological impairment. Compared with control group results, physical quality of life was reduced in patients with pectus excavatum, while mental quality of life was decreased in patients with pectus carinatum (p<0.05). Body image was highly disturbed in all the patients and differed significantly from the control group (p<0.01). Patients with pectus carinatum appeared to be less satisfied with their appearance than those with pectus excavatum (p=0.07). Body image distress was multivariately associated with both reduced mental quality of life and low self-esteem (p<0.001). Body image did not influence physical quality of life. Patients displayed no elevated rates of mental disorders according to Diagnostic and Statistical Manual of Mental Disorders, fourth edition (DSM-IV) criteria. Since self-perception is a major contributor to therapeutic decision making, a systematic evaluation of body image should be included in the assessment of patients with chest deformities. Body image concerns may be even more relevant to the decision-making process than physical restrictions. Exaggerated dysmorphic concerns should be prospectively investigated in their ability to influence the extent of satisfaction with the surgical outcome. Copyright © 2011 European Association for Cardio-Thoracic Surgery. Published by Elsevier B.V. All rights reserved.

  11. Features of Computer-Based Decision Aids: Systematic Review, Thematic Synthesis, and Meta-Analyses.

    PubMed

    Syrowatka, Ania; Krömker, Dörthe; Meguerditchian, Ari N; Tamblyn, Robyn

    2016-01-26

    Patient information and education, such as decision aids, are gradually moving toward online, computer-based environments. Considerable research has been conducted to guide content and presentation of decision aids. However, given the relatively new shift to computer-based support, little attention has been given to how multimedia and interactivity can improve upon paper-based decision aids. The first objective of this review was to summarize published literature into a proposed classification of features that have been integrated into computer-based decision aids. Building on this classification, the second objective was to assess whether integration of specific features was associated with higher-quality decision making. Relevant studies were located by searching MEDLINE, Embase, CINAHL, and CENTRAL databases. The review identified studies that evaluated computer-based decision aids for adults faced with preference-sensitive medical decisions and reported quality of decision-making outcomes. A thematic synthesis was conducted to develop the classification of features. Subsequently, meta-analyses were conducted based on standardized mean differences (SMD) from randomized controlled trials (RCTs) that reported knowledge or decisional conflict. Further subgroup analyses compared pooled SMDs for decision aids that incorporated a specific feature to other computer-based decision aids that did not incorporate the feature, to assess whether specific features improved quality of decision making. Of 3541 unique publications, 58 studies met the target criteria and were included in the thematic synthesis. The synthesis identified six features: content control, tailoring, patient narratives, explicit values clarification, feedback, and social support. A subset of 26 RCTs from the thematic synthesis was used to conduct the meta-analyses. As expected, computer-based decision aids performed better than usual care or alternative aids; however, some features performed better than others. Integration of content control improved quality of decision making (SMD 0.59 vs 0.23 for knowledge; SMD 0.39 vs 0.29 for decisional conflict). In contrast, tailoring reduced quality of decision making (SMD 0.40 vs 0.71 for knowledge; SMD 0.25 vs 0.52 for decisional conflict). Similarly, patient narratives also reduced quality of decision making (SMD 0.43 vs 0.65 for knowledge; SMD 0.17 vs 0.46 for decisional conflict). Results were varied for different types of explicit values clarification, feedback, and social support. Integration of media rich or interactive features into computer-based decision aids can improve quality of preference-sensitive decision making. However, this is an emerging field with limited evidence to guide use. The systematic review and thematic synthesis identified features that have been integrated into available computer-based decision aids, in an effort to facilitate reporting of these features and to promote integration of such features into decision aids. The meta-analyses and associated subgroup analyses provide preliminary evidence to support integration of specific features into future decision aids. Further research can focus on clarifying independent contributions of specific features through experimental designs and refining the designs of features to improve effectiveness.

  12. 7 CFR 1755.522 - RUS general specification for digital, stored program controlled central office equipment.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) shall be detected and the equivalent of a carrier group alarm shall be executed in 2.5 ±0.5 seconds.../federal_register/code_of_federal_regulations/ibr_locations.html. (b) Reliability. (1) Quality control and... designed such that the expected individual line downtime does not exceed 30 minutes per year. This is the...

  13. Specific gravity responses of slash and loblolly pine following mid-rotation fertilization

    Treesearch

    Kimberly R. Love-Myers; Alexander Clark III; Laurence R. Schimleck; Eric J. Jokela; Richard F. Daniels

    2009-01-01

    Wood quality attributes were examined in six stands of slash pine (Pinus elliottii Engelm. var. elliottii) and loblolly pine (P. taeda L.) in the lower Coastal Plain of Georgia and Florida. Several plots comprised each stand, and each plot was divided so that it received three fertilizer treatments: a control treatment with herbaceous weed control at planting...

  14. Revisiting the Procedures for the Vector Data Quality Assurance in Practice

    NASA Astrophysics Data System (ADS)

    Erdoğan, M.; Torun, A.; Boyacı, D.

    2012-07-01

    Immense use of topographical data in spatial data visualization, business GIS (Geographic Information Systems) solutions and applications, mobile and location-based services forced the topo-data providers to create standard, up-to-date and complete data sets in a sustainable frame. Data quality has been studied and researched for more than two decades. There have been un-countable numbers of references on its semantics, its conceptual logical and representations and many applications on spatial databases and GIS. However, there is a gap between research and practice in the sense of spatial data quality which increases the costs and decreases the efficiency of data production. Spatial data quality is well-known by academia and industry but usually in different context. The research on spatial data quality stated several issues having practical use such as descriptive information, metadata, fulfillment of spatial relationships among data, integrity measures, geometric constraints etc. The industry and data producers realize them in three stages; pre-, co- and post data capturing. The pre-data capturing stage covers semantic modelling, data definition, cataloguing, modelling, data dictionary and schema creation processes. The co-data capturing stage covers general rules of spatial relationships, data and model specific rules such as topologic and model building relationships, geometric threshold, data extraction guidelines, object-object, object-belonging class, object-non-belonging class, class-class relationships to be taken into account during data capturing. And post-data capturing stage covers specified QC (quality check) benchmarks and checking compliance to general and specific rules. The vector data quality criteria are different from the views of producers and users. But these criteria are generally driven by the needs, expectations and feedbacks of the users. This paper presents a practical method which closes the gap between theory and practice. Development of spatial data quality concepts into developments and application requires existence of conceptual, logical and most importantly physical existence of data model, rules and knowledge of realization in a form of geo-spatial data. The applicable metrics and thresholds are determined on this concrete base. This study discusses application of geo-spatial data quality issues and QA (quality assurance) and QC procedures in the topographic data production. Firstly we introduce MGCP (Multinational Geospatial Co-production Program) data profile of NATO (North Atlantic Treaty Organization) DFDD (DGIWG Feature Data Dictionary), the requirements of data owner, the view of data producers for both data capturing and QC and finally QA to fulfil user needs. Then, our practical and new approach which divides the quality into three phases is introduced. Finally, implementation of our approach to accomplish metrics, measures and thresholds of quality definitions is discussed. In this paper, especially geometry and semantics quality and quality control procedures that can be performed by the producers are discussed. Some applicable best-practices that we experienced on techniques of quality control, defining regulations that define the objectives and data production procedures are given in the final remarks. These quality control procedures should include the visual checks over the source data, captured vector data and printouts, some automatic checks that can be performed by software and some semi-automatic checks by the interaction with quality control personnel. Finally, these quality control procedures should ensure the geometric, semantic, attribution and metadata quality of vector data.

  15. Inferring speaker attributes in adductor spasmodic dysphonia: ratings from unfamiliar listeners.

    PubMed

    Isetti, Derek; Xuereb, Linnea; Eadie, Tanya L

    2014-05-01

    To determine whether unfamiliar listeners' perceptions of speakers with adductor spasmodic dysphonia (ADSD) differ from control speakers on the parameters of relative age, confidence, tearfulness, and vocal effort and are related to speaker-rated vocal effort or voice-specific quality of life. Twenty speakers with ADSD (including 6 speakers with ADSD plus tremor) and 20 age- and sex-matched controls provided speech recordings, completed a voice-specific quality-of-life instrument (Voice Handicap Index; Jacobson et al., 1997), and rated their own vocal effort. Twenty listeners evaluated speech samples for relative age, confidence, tearfulness, and vocal effort using rating scales. Listeners judged speakers with ADSD as sounding significantly older, less confident, more tearful, and more effortful than control speakers (p < .01). Increased vocal effort was strongly associated with decreased speaker confidence (rs = .88-.89) and sounding more tearful (rs = .83-.85). Self-rated speaker effort was moderately related (rs = .45-.52) to listener impressions. Listeners' perceptions of confidence and tearfulness were also moderately associated with higher Voice Handicap Index scores (rs = .65-.70). Unfamiliar listeners judge speakers with ADSD more negatively than control speakers, with judgments extending beyond typical clinical measures. The results have implications for counseling and understanding the psychosocial effects of ADSD.

  16. [Pursuit of economic efficiency in the hospital laboratory--full automatic re-test system of clinical chemistry, hematology, immunology and cost control system].

    PubMed

    Chiba, M

    2000-10-01

    Further business improvement is requested due to finance-based fluctuation and the influence of the revision in the medical treatment law. Therefore, new laboratories are needed. To achieving this in our hospital, economic efficiency is being pursued. The first issue is the use of space, the second issue is labor-saving. The third issue is the simplification of business procedures. There is individual quality control by the zonal verification method that we developed, as well as the quality control of the batch method using controlled substances. The four issue is cost control. By controlling the delivery and use of reagents and materials including the term of validity control, we made an effort to abolition defective stock. The fifth issue is correspondence to circulation style society. The disposal of laboratory garbage is a major issue. We controlled garbage that occurs unnecessarily. Furthermore, we are improving the demand for reagents that exceeds the specification and use reagent containers.

  17. Rotorcraft handling-qualities design criteria development

    NASA Technical Reports Server (NTRS)

    Aiken, Edwin W.; Lebacqz, J. Victor; Chen, Robert T. N.; Key, David L.

    1988-01-01

    Joint NASA/Army efforts at the Ames Research Center to develop rotorcraft handling-qualities design criteria began in earnest in 1975. Notable results were the UH-1H VSTOLAND variable stability helicopter, the VFA-2 camera-and-terrain-board simulator visual system, and the generic helicopter real-time mathematical model, ARMCOP. An initial series of handling-qualities studies was conducted to assess the effects of rotor design parameters, interaxis coupling, and various levels of stability and control augmentation. The ability to conduct in-flight handling-qualities research was enhanced by the development of the NASA/Army CH-47 variable-stability helicopter. Research programs conducted using this vehicle include vertical-response investigations, hover augmentation systems, and the effects of control-force characteristics. The handling-qualities data base was judged to be sufficient to allow an update of the military helicopter handling-qualities specification, MIL-H-8501. These efforts, including not only the in-house experimental work but also contracted research and collaborative programs performed under the auspices of various international agreements. The report concludes by reviewing the topics that are currently most in need of work, and the plans for addressing these topics.

  18. Acoustical analysis of trained and untrained singers onsite before and after prolonged voice use

    NASA Astrophysics Data System (ADS)

    Jackson, Christophe E.

    Controlled acoustic environments are important in voice research. Recording environment affects the quality of voice recordings. While sound booths and anechoic chambers are examples of controlled acoustic environments widely used in research, they are both costly and not portable. The long-term goal of this project is to compare the voice usage and efficiency of trained and untrained singers onsite immediately before and after vocal performance. The specific goal of this project is the further of development a Portable Sound Booth (PSB) and standardization of onsite voice recording procedures under controlled conditions. We hypothesized that the simple and controlled acoustic environment provided by the PSB would enable consistent reliable onsite voice recordings and the immediate differences as a consequence of voice usage were measurable. Research has suggested that it would be possible to conduct onsite voice recordings. Proof of concept research titled "Construction and Characterization of a Portable Sound Booth for Onsite Measurement" was conducted before initiating the full research effort. Preliminary findings revealed that: (1) it was possible to make high-quality voice recordings onsite, (2) the use of a Portable Sound Booth (PSB) required further acoustic characterization of its inherent acoustic properties, and (3) testable differences before and after performance were evident. The specific aims were to (1) develop and refine onsite objective voice measurements in the PSB and (2) evaluate use of the PSB to measure voice quality changes before and after voice usage.

  19. Quality of surgical randomized controlled trials for acute cholecystitis: assessment based on CONSORT and additional check items.

    PubMed

    Shikata, Satoru; Nakayama, Takeo; Yamagishi, Hisakazu

    2008-01-01

    In this study, we conducted a limited survey of reports of surgical randomized controlled trials, using the consolidated standards of reporting trials (CONSORT) statement and additional check items to clarify problems in the evaluation of surgical reports. A total of 13 randomized trials were selected from two latest review articles on biliary surgery. Each randomized trial was evaluated according to 28 quality measures that comprised items from the CONSORT statement plus additional items. Analysis focused on relationships between the quality of each study and the estimated effect gap ("pooled estimate in meta-analysis" -- "estimated effect of each study"). No definite relationships were found between individual study quality and the estimated effect gap. The following items could have been described but were not provided in almost all the surgical RCT reports: "clearly defined outcomes"; "details of randomization"; "participant flow charts"; "intention-to-treat analysis"; "ancillary analyses"; and "financial conflicts of interest". The item, "participation of a trial methodologist in the study" was not found in any of the reports. Although the quality of reporting trials is not always related to a biased estimation of treatment effect, the items used for quality measures must be described to enable readers to evaluate the quality and applicability of the reporting. Further development of an assessment tool is needed for items specific to surgical randomized controlled trials.

  20. Formal specification and verification of Ada software

    NASA Technical Reports Server (NTRS)

    Hird, Geoffrey R.

    1991-01-01

    The use of formal methods in software development achieves levels of quality assurance unobtainable by other means. The Larch approach to specification is described, and the specification of avionics software designed to implement the logic of a flight control system is given as an example. Penelope is described which is an Ada-verification environment. The Penelope user inputs mathematical definitions, Larch-style specifications and Ada code and performs machine-assisted proofs that the code obeys its specifications. As an example, the verification of a binary search function is considered. Emphasis is given to techniques assisting the reuse of a verification effort on modified code.

  1. Deliberate Practice Enhances Quality of Laparoscopic Surgical Performance in a Randomized Controlled Trial: from Arrested Development to Expert Performance

    PubMed Central

    Hashimoto, Daniel A.; Sirimanna, Pramudith; Gomez, Ernest D.; Beyer-Berjot, Laura; Ericsson, K. Anders; Williams, Noel N.; Darzi, Ara; Aggarwal, Rajesh

    2014-01-01

    Background This study investigated whether deliberate practice leads to an increase in surgical quality in virtual reality (VR) laparoscopic cholecystectomies (LC). Previous research has suggested that sustained DP is effective in surgical training. Methods Fourteen residents were randomized into deliberate practice (n=7) or control training (n=7). Both groups performed 10 sessions of two VR LCs. Each session, the DP group was assigned 30 minutes of DP activities in between LCs while the control group viewed educational videos or read journal articles. Performance was assessed on speed and dexterity; quality was rated with global (GRS) and procedure-specific (PSRS) rating scales. All participants then performed five porcine LCs. Results Both groups improved over 20 VR LCs in time, dexterity, and global rating scales (all p<0.05). After 20 LCs, there were no differences in speed or dexterity between groups. The DP group achieved higher quality of VR surgical performance than control for GRS (26 vs. 20, p=0.001) and PSRS (18 vs. 15, p=0.001). For VR cases, DP subjects plateaued at GRS=25 after 10 cases and control group at GRS=20 after five cases. At completion of VR training, 100% of the DP group reached target quality of performance (GRS≥21) compared to 30% in the control group. There were no significant differences for improvements in time or dexterity over five porcine LCs. Conclusion This study suggests that DP leads to higher quality performance in VR LC than standard training alone. Standard training may leave individuals in a state of “arrested development” compared to DP. PMID:25539697

  2. A comprehensive assessment of RNA-seq accuracy, reproducibility and information content by the Sequencing Quality Control consortium

    PubMed Central

    2014-01-01

    We present primary results from the Sequencing Quality Control (SEQC) project, coordinated by the United States Food and Drug Administration. Examining Illumina HiSeq, Life Technologies SOLiD and Roche 454 platforms at multiple laboratory sites using reference RNA samples with built-in controls, we assess RNA sequencing (RNA-seq) performance for junction discovery and differential expression profiling and compare it to microarray and quantitative PCR (qPCR) data using complementary metrics. At all sequencing depths, we discover unannotated exon-exon junctions, with >80% validated by qPCR. We find that measurements of relative expression are accurate and reproducible across sites and platforms if specific filters are used. In contrast, RNA-seq and microarrays do not provide accurate absolute measurements, and gene-specific biases are observed, for these and qPCR. Measurement performance depends on the platform and data analysis pipeline, and variation is large for transcript-level profiling. The complete SEQC data sets, comprising >100 billion reads (10Tb), provide unique resources for evaluating RNA-seq analyses for clinical and regulatory settings. PMID:25150838

  3. Automated standardization technique for an inductively-coupled plasma emission spectrometer

    USGS Publications Warehouse

    Garbarino, John R.; Taylor, Howard E.

    1982-01-01

    The manifold assembly subsystem described permits real-time computer-controlled standardization and quality control of a commercial inductively-coupled plasma atomic emission spectrometer. The manifold assembly consists of a branch-structured glass manifold, a series of microcomputer-controlled solenoid valves, and a reservoir for each standard. Automated standardization involves selective actuation of each solenoid valve that permits a specific mixed standard solution to be pumped to the nebulizer of the spectrometer. Quality control is based on the evaluation of results obtained for a mixed standard containing 17 analytes, that is measured periodically with unknown samples. An inaccurate standard evaluation triggers restandardization of the instrument according to a predetermined protocol. Interaction of the computer-controlled manifold assembly hardware with the spectrometer system is outlined. Evaluation of the automated standardization system with respect to reliability, simplicity, flexibility, and efficiency is compared to the manual procedure. ?? 1982.

  4. Quality Control and Nondestructive Evaluation Techniques for Composites. Part 1. Overview of Characterization Techniques for Composite Reliability

    DTIC Science & Technology

    1982-05-01

    MONITORING AND MANAGEMENT , 34 7.0 NONDESTRUCTIVE EVALUATION ( NDE ) 37 8. 0 SURFACE NDE 44 9.0 PERFORMANCE AND PROOF TESTING 46 10.0 SUMMARY AND...Chemical Quality Assurance Testing 2. Processability Testing 3. Cure Monitoring and Management 4. Nondestructive Evaluation ( NDE ) 5. Performance and...the management concept for implementing the specific tests. Chemical analysis, nondestructive evaluation ( NDE ) and environmental fatigue testing of

  5. Describing methods and interventions: a protocol for the systematic analysis of the perioperative quality improvement literature.

    PubMed

    Jones, Emma; Lees, Nicholas; Martin, Graham; Dixon-Woods, Mary

    2014-09-05

    Quality improvement (QI) methods are widely used in surgery in an effort to improve care, often using techniques such as Plan-Do-Study-Act cycles to implement specific interventions. Explicit definition of both the QI method and quality intervention is necessary to enable the accurate replication of effective interventions in practice, facilitate cumulative learning, reduce research waste and optimise benefits to patients. This systematic review aims to assess quality of reporting of QI methods and quality interventions in perioperative care. Studies reporting on quality interventions implemented in perioperative care settings will be identified. Searches will be conducted in the Ovid SP version of Medline, Scopus, the Cochrane Central Register of Controlled Trials, the Cochrane Effective Practice and Organisation of Care database and the related articles function of PubMed. The journal BMJ Quality will be searched separately. Search strategy terms will relate to (i) surgery, (ii) QI and (iii) evaluation methods. Explicit exclusion and inclusion criteria will be applied. Data from studies will be extracted using a data extraction form. The Template for Intervention Description and Replication (TIDieR) checklist will be used to evaluate quality of reporting, together with additional items aimed at assessing QI methods specifically. PROSPERO http://CRD42014012845.

  6. Sleeping with one eye open: loneliness and sleep quality in young adults.

    PubMed

    Matthews, T; Danese, A; Gregory, A M; Caspi, A; Moffitt, T E; Arseneault, L

    2017-09-01

    Feelings of loneliness are common among young adults, and are hypothesized to impair the quality of sleep. In the present study, we tested associations between loneliness and sleep quality in a nationally representative sample of young adults. Further, based on the hypothesis that sleep problems in lonely individuals are driven by increased vigilance for threat, we tested whether past exposure to violence exacerbated this association. Data were drawn from the Environmental Risk (E-Risk) Longitudinal Twin Study, a birth cohort of 2232 twins born in England and Wales in 1994 and 1995. We measured loneliness using items from the UCLA Loneliness Scale, and sleep quality using the Pittsburgh Sleep Quality Index. We controlled for covariates including social isolation, psychopathology, employment status and being a parent of an infant. We examined twin differences to control for unmeasured genetic and family environment factors. Feelings of loneliness were associated with worse overall sleep quality. Loneliness was associated specifically with subjective sleep quality and daytime dysfunction. These associations were robust to controls for covariates. Among monozygotic twins, within-twin pair differences in loneliness were significantly associated with within-pair differences in sleep quality, indicating an association independent of unmeasured familial influences. The association between loneliness and sleep quality was exacerbated among individuals exposed to violence victimization in adolescence or maltreatment in childhood. Loneliness is robustly associated with poorer sleep quality in young people, underscoring the importance of early interventions to mitigate the long-term outcomes of loneliness. Special care should be directed towards individuals who have experienced victimization.

  7. Beclomethasone Dipropionate Nasal Aerosol in Patients with Perennial Allergic Rhinitis (BALANCE) study: 6-month results.

    PubMed

    Bukstein, Donald; Parikh, Ruchir; Eid, Sherrine; Ferro, Thomas; Morello, Jean-Pierre

    2016-01-01

    Perennial allergic rhinitis (PAR) exerts significant quality-of-life and economic burdens on society. Beclomethasone dipropionate (BDP) nasal aerosol is the first nonaqueous, hydrofluoroalkane-propelled intranasal corticosteroid approved for patients in the United States to treat PAR and seasonal allergic rhinitis. To evaluate real-world effectiveness of BDP nasal aerosol from the patient's perspective by using a postmarketing observational registry. Patients (N = 824) from 43 U.S. study sites completed monthly patient-reported outcome instruments, including the Rhinitis Control Assessment Test (primary outcome variable), Treatment Satisfaction Questionnaire for Medication, Work Productivity and Activity Impairment Questionnaire plus Classroom Impairment Questions: Allergy-Specific, Pittsburgh Sleep Quality Index, and Mini Rhinoconjunctivitis Quality of Life Questionnaire for 6 months. The primary outcome assessment (Rhinitis Control Assessment Test score) (N = 527) indicated significant symptomatic improvement over baseline beginning at month 1 (p < 0.001), with >78.8% of respondents who achieved clinically meaningful improvement over 6 months. Secondary outcome measures Mini Rhinoconjunctivitis Quality of Life Questionnaire (p < 0.001), Pittsburgh Sleep Quality Index (p < 0.001), and Treatment Satisfaction Questionnaire for Medication-9 scales of effectiveness (p < 0.001), global satisfaction (p = 0.001), and patient-rated convenience (p = 0.03), significantly increased from baseline to month 6. Five of seven measurements of the Work Productivity and Activity Impairment Questionnaire plus Classroom Impairment Questions: Allergy-Specific, with the exception of work time missed and class time missed, were significantly (p < 0.001) improved in patients treated with BDP compared with baseline. Treatment with nonaqueous BDP nasal aerosol in a real-world setting significantly improved PAR symptoms and measures of quality of life, work, and school-related activities, and is associated with high patient satisfaction, reduced productivity loss and activity impairment, and improvement in sleep quality.

  8. 16 CFR 1000.29 - Directorate for Engineering Sciences.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... standards, product safety tests and test methods, performance criteria, design specifications, and quality control standards for consumer products, based on engineering and scientific methods. It conducts... consumer interest groups. The Directorate conducts human factors studies and research of consumer product...

  9. 16 CFR 1000.29 - Directorate for Engineering Sciences.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... standards, product safety tests and test methods, performance criteria, design specifications, and quality control standards for consumer products, based on engineering and scientific methods. It conducts... consumer interest groups. The Directorate conducts human factors studies and research of consumer product...

  10. The Effects of Poor Sleep Quality on Cognitive Function of Patients with Cirrhosis

    PubMed Central

    Stewart, Charmaine A.; Auger, Robert; Enders, Felicity T. B.; Felmlee-Devine, Donna; Smith, Glenn E.

    2014-01-01

    Objectives: This study was conducted to assess the ill-defined relationship between sleep quality and multiple, specific domains of cognitive function in patients with cirrhosis. Methods: A comprehensive battery of neuropsychological tests (divided into six neurocognitive domains) and a standardized, validated measure of sleep quality (Pittsburgh Sleep Quality Index [PSQI]) were administered to patients with cirrhosis and without evidence of overt hepatic encephalopathy, recruited from liver transplant and advanced liver disease clinics (n = 34). An inflammatory bowel disease (IBD) control group (n = 23) was similarly recruited and evaluated to control for the secondary effect of a chronic illness on cognition. PSQI global and component scores were used to predict cognitive function in each neurocognitive domain, using linear regression Results: Global PSQI scores were significantly higher (indicating poorer sleep quality) in the cirrhosis group (median [range] = 10 [1-19]) than in IBD controls = 5 (1-14); p = 0.002). After controlling for age and education, short duration of sleep was associated with impaired memory for patients with cirrhosis; the use of soporific agents was associated with poor visual-perceptual function in patients with IBD. Conclusions: Poor sleep was associated with worsening of the already impaired cognitive function of patients with cirrhosis. Citation: Stewart CA; Auger R; Enders FTB; Felmlee-Devine D; Smith GE. The effects of poor sleep quality on cognitive function of patients with cirrhosis. J Clin Sleep Med 2014;10(1):21-26. PMID:24426816

  11. Meta-analysis of transcutaneous electrical nerve stimulation for relief of spinal pain.

    PubMed

    Resende, L; Merriwether, E; Rampazo, É P; Dailey, D; Embree, J; Deberg, J; Liebano, R E; Sluka, K A

    2018-04-01

    We conducted a systematic review and meta-analysis analysing the existing data on transcutaneous electrical nerve stimulation (TENS) or interferential current (IFC) for chronic low back pain (CLBP) and/or neck pain (CNP) taking into account intensity and timing of stimulation, examining pain, function and disability. Seven electronic databases were searched for TENS or IFC treatment in non-specific CLBP or CNP. Four reviewers independently selected randomized controlled trials (RCTs) of TENS or IFC intervention in adult individuals with non-specific CLBP or CNP. Primary outcomes were for self-reported pain intensity and back-specific disability. Two reviewers performed quality assessment, and two reviewers extracted data using a standardized form. Nine RCTs were selected (eight CLBP; one CNP), and seven studies with complete data sets were included for meta-analysis (655 participants). For CLBP, meta-analysis shows TENS/IFC intervention, independent of time of assessment, was significantly different from placebo/control (p < 0.02). TENS/IFC intervention was better than placebo/control, during therapy (p = 0.02), but not immediately after therapy (p = 0.08), or 1-3 months after therapy (p = 0.99). Analysis for adequate stimulation parameters was not significantly different, and there was no effect on disability. This systematic review provides inconclusive evidence of TENS benefits in low back pain patients because the quality of the studies was low, and adequate parameters and timing of assessment were not uniformly used or reported. Without additional high-quality clinical trials using sufficient sample sizes and adequate parameters and outcome assessments, the outcomes of this review are likely to remain unchanged. These data highlight the need for additional high-quality RCTs to examine the effects of TENS in CLBP. Trials should consider intensity of stimulation, timing of outcome assessment and assessment of pain, disability and function. © 2017 European Pain Federation - EFIC®.

  12. Bilateral Vestibular Deficiency: Quality of Life and Economic Implications.

    PubMed

    Sun, Daniel Q; Ward, Bryan K; Semenov, Yevgeniy R; Carey, John P; Della Santina, Charles C

    2014-06-01

    Bilateral vestibular deficiency (BVD) causes chronic imbalance and unsteady vision and greatly increases the risk of falls; however, its effects on quality of life and economic impact are not well defined. To quantify disease-specific and health-related quality of life, health care utilization, and economic impact on individuals with BVD in comparison with those with unilateral vestibular deficiency (UVD). Cross-sectional survey study of patients with BVD or UVD and healthy controls at an academic medical center. Vestibular dysfunction was diagnosed by means of caloric nystagmography. Survey questionnaire. Health status was measured using the Dizziness Handicap Index (DHI) and Health Utility Index Mark 3 (HUI3). Economic burden was estimated using participant responses to questions on disease-specific health care utilization and lost productivity. Fifteen patients with BVD, 22 with UVD, and 23 healthy controls participated. In comparison with patients with UVD and controls, patients with BVD had significantly worse DHI (P < .001) and HUI3 scores. Statistically significant between-group differences were observed for overall HUI3 score (P < .001) and for specific attributes including vision, hearing, ambulation, emotion, and pain (P < .001 for all). Generalized linear model analysis of clinical variables associated with HUI3 scores after adjustment for other variables (including sex, race, education, age, and frequency of dizziness-related outpatient clinic visits) showed that the presence of UVD (P < .001) or BVD (P < .001), increased dizziness-related emergency room visits (P = .002), and increased dizziness-related missed work days (P < .001) were independently associated with worse HUI3 scores. Patients with BVD and UVD incurred estimated mean (range) annual economic burdens of $13,019 ($0-$48,830) and $3531 ($0-$48,442) per patient, respectively. Bilateral vestibular deficiency significantly decreases quality of life and imposes substantial economic burdens on individuals and society. These results underscore the limits of adaptation and compensation in BVD. Furthermore, they quantify the potential benefits of prosthetic restoration of vestibular function both to these individuals and to society.

  13. Effects of balance-specific exercises on balance, physical activity and quality of life in adults with multiple sclerosis: a pilot investigation.

    PubMed

    Kasser, Susan L; Jacobs, Jesse V; Ford, Marley; Tourville, Timothy W

    2015-01-01

    To evaluate the efficacy of functional balance exercises on balance impairment, physical activity and quality of life (QOL) in adults with multiple sclerosis (MS). A multiple-baseline time-series design with an uncontrolled intervention. Ten subjects with MS completed assessments twice before and once after a 10-week balance intervention. ANOVA were used to evaluate the effects of testing session on the Brief-BESTest, instrumented stance and gait recordings by inertial motion sensors, lower-limb strength recorded by force transducers, accelerometry-based activity, the 12-item MS Walking Scale (MSWS-12), the Multiple Sclerosis Quality of Life-54 (MSQOL-54) questionnaire, the Modified Fatigue Impact scale (MFIS) and the Activity-specific Balance Confidence (ABC) scale. The intervention associated with significantly improved scores on the MSQOL-54 mental component, MFIS, MSWS-12 and Brief-BESTest. Sway amplitude significantly decreased and jerk significantly increased during instrumented standing on foam with eyes closed. Instrumented gait recordings of sagittal trunk range of motion also significantly decreased. ABC scores, strength measures and activity measures were not significantly changed. Ten weeks of functional balance exercises provided a feasible intervention for individuals with MS that improved components of balance, mental well-being and perceived fatigue impact and ambulation disability. A future randomized, controlled clinical trial should confirm these preliminary findings. Implications for Rehabilitation A balance-specific exercise program is both safe and feasible for individuals with mild-to-moderate MS. Comprehensive exercise interventions that are conceptually driven and employ well-designed progressive exercise across multiple contexts of balance control can facilitate improvements in balance impairments associated with MS. Functional balance exercises can positively impact clinical and objective measures of balance control and favorably influence perceptions of ambulation disability and fatigue as well as perceived quality of life in people with MS.

  14. The Quality of Water and Bottom Material in Lunga Reservoir, Virginia, September 2004 through August 2005

    USGS Publications Warehouse

    Lotspeich, R. Russell

    2007-01-01

    Lunga Reservoir is on the U.S. Marine Corps Base in Quantico, which is in the Potomac River basin and the Piedmont Physiographic Province of northern Virginia. Because of the potential use of the reservoir for scuba-diver training and public water supply in addition to current recreational activities, the U.S. Marine Corps wanted to know more about the water quality of Lunga Reservoir and how it compared to Virginia Department of Environmental Quality and Virginia State Water Control Board ambient water-quality standards. Water samples and physical properties were collected by the U.S. Geological Survey at 6 locations throughout Lunga Reservoir, and physical properties were collected at 11 additional locations in the reservoir from September 2004 through August 2005. Water samples for analysis of pesticides and bottom-material trace elements were collected once during the study at four of the sampling locations. Water temperature, dissolved-oxygen concentration, specific conductance, pH, and total chlorophyll concentration in Lunga Reservoir all had similar seasonal and spatial variations as in other lakes and reservoirs in this geographic region - thermal gradient in the summer and fall and isothermal conditions in the winter and early spring. Concentrations of water-quality indicators in Lunga Reservoir were within comparable levels of those in other reservoirs and did not violate the Virginia State Water Control Board standards for public water supplies. Water temperatures throughout Lunga Reservoir during the study period ranged from 4.4 to 30.1 degrees Celsius, well below the State Water Control Board maximum water temperature criteria of 32 degrees Celsius. Dissolved-oxygen concentrations ranged from 0.05 to 14.1 milligrams per liter throughout the reservoir during the study period, but never fell below the State Water Control Board minimum dissolved-oxygen criterion of 4.0 milligrams per liter at the surface of Lunga Reservoir. Specific conductance throughout Lunga Reservoir ranged from 29 to 173 microsiemens per centimeter at 25 degrees Celsius during the study period, with a mean specific conductance of 68 microsiemens per centimeter at 25 degrees Celsius. Measurements of pH throughout the reservoir ranged from 4.8 to 7.6 standard units. Concentrations of chemical constituents analyzed in Lunga Reservoir samples were below any State Water Control Board criteria and generally were similar in concentration to the same chemical constituents in other reservoirs in the State. Four water samples were analyzed for 54 pesticides, and none of these pesticides were above the laboratory minimum reporting level.

  15. Effects of exercise and diet interventions on obesity-related sleep disorders in men: study protocol for a randomized controlled trial.

    PubMed

    Tan, Xiao; Saarinen, Antti; Mikkola, Tuija M; Tenhunen, Jarkko; Martinmäki, Samu; Rahikainen, Aki; Cheng, Shumei; Eklund, Niklas; Pekkala, Satu; Wiklund, Petri; Munukka, Eveliina; Wen, Xinfei; Cong, Fengyu; Wang, Xi; Zhang, Yajun; Tarkka, Ina; Sun, Yining; Partinen, Markku; Alen, Markku; Cheng, Sulin

    2013-07-26

    Sleep is essential for normal and healthy living. Lack of good quality sleep affects physical, mental and emotional functions. Currently, the treatments of obesity-related sleep disorders focus more on suppressing sleep-related symptoms pharmaceutically and are often accompanied by side effects. Thus, there is urgent need for alternative ways to combat chronic sleep disorders. This study will investigate underlying mechanisms of the effects of exercise and diet intervention on obesity-related sleep disorders, the role of gut microbiota in relation to poor quality of sleep and day-time sleepiness, as well as the levels of hormones responsible for sleep-wake cycle regulation. Participants consist of 330 (target sample) Finnish men aged 30 to 65 years. Among them, we attempt to randomize 180 (target sample) with sleep disorders into exercise and diet intervention. After screening and physician examination, 101 men with sleep disorders are included and are randomly assigned into three groups: exercise (n = 33), diet (n = 35), and control (n = 33). In addition, we attempt to recruit a target number of 150 healthy men without sleep disorders as the reference group. The exercise group undergoes a six-month individualized progressive aerobic exercise program based on initial fitness level. The diet group follows a six month specific individualized diet program. The control group and reference group are asked to maintain their normal activity and diet during intervention. Measurements are taken before and after the intervention. Primary outcomes include objective sleep measurements by polysomnography and a home-based non-contact sleep monitoring system, and subjective sleep evaluation by questionnaires. Secondary outcome measures include anthropometry, body composition, fitness, sleep disorder-related lifestyle risk factors, composition of gut microbiota and adipose tissue metabolism, as well as specific hormone and neurotranmitter levels and inflammatory biomarkers from venous blood samples. It is expected that the improvement of sleep quality after exercise and diet intervention will be evident both in subjective and objective measures of quality of sleep. Additionally, the change of sleep quality induced by exercise and diet intervention is expected to be related to the changes in specific hormones and inflammatory biomarkers, and in the composition of gut microbiota.

  16. Coping and social problem solving correlates of asthma control and quality of life.

    PubMed

    McCormick, Sean P; Nezu, Christine M; Nezu, Arthur M; Sherman, Michael; Davey, Adam; Collins, Bradley N

    2014-02-01

    In a sample of adults with asthma receiving care and medication in an outpatient pulmonary clinic, this study tested for statistical associations between social problem-solving styles, asthma control, and asthma-related quality of life. These variables were measured cross sectionally as a first step toward more systematic application of social problem-solving frameworks in asthma self-management training. Recruitment occurred during pulmonology clinic service hours. Forty-four adults with physician-confirmed diagnosis of asthma provided data including age, gender, height, weight, race, income, and comorbid conditions. The Asthma Control Questionnaire, the Mini Asthma Quality of Life Questionnaire (Short Form), and peak expiratory force measures offered multiple views of asthma health at the time of the study. Maladaptive coping (impulsive and careless problem-solving styles) based on transactional stress models of health were assessed with the Social Problem-Solving Inventory-Revised: Short Form. Controlling for variance associated with gender, age, and income, individuals reporting higher impulsive-careless scores exhibited significantly lower scores on asthma control (β = 0.70, p = 0.001, confidence interval (CI) [0.37-1.04]) and lower asthma-related quality of life (β = 0.79, p = 0.017, CI [0.15-1.42]). These findings suggest that specific maladaptive problem-solving styles may uniquely contribute to asthma health burdens. Because problem-solving coping strategies are both measureable and teachable, behavioral interventions aimed at facilitating adaptive coping and problem solving could positively affect patient's asthma management and quality of life.

  17. The effects of mindfulness and relaxation training for insomnia (MRTI) on postmenopausal women: a pilot study.

    PubMed

    Garcia, Marcelo C; Kozasa, Elisa H; Tufik, Sergio; Mello, Luiz Eugênio A M; Hachul, Helena

    2018-05-21

    The aim of the study was to evaluate the effects of mindfulness and relaxation training for insomnia on insomnia and quality of life in postmenopausal women. Thirty postmenopausal women aged 50 to 65 years, who were not using hormone therapy, and had a diagnosis of insomnia and an apnea-hypopnea index of less than 15, were randomly assigned to two groups: a mindfulness intervention group and a control group. They were assessed before the intervention, and 8 weeks after its completion using questionnaires assessing sleep quality (Pittsburgh Sleep Quality Index), insomnia (Insomnia Severity Index), quality of life in menopause (Menopause-Specific Quality of Life), menopausal symptoms (Kupperman Menopausal Index), and level of attention (Mindfulness Awareness Attention Scale). They were also assessed through ambulatory polysomnography. This is a pilot study and is limited by its small sample size. The results of the questionnaires showed significant differences in the group that received mindfulness training compared with the control group, namely, improvements in sleep quality, a reduction in the severity of insomnia, a better quality of life, improved attention levels, and a reduction in menopausal and vasomotor symptoms. Polysomnography results showed no differences between the groups. Eight weeks mindfulness meditation training improved sleep quality, quality of life, attention levels, and reduced vasomotor symptoms in postmenopausal women with insomnia.

  18. Quality of work, well-being, and intended early retirement of older employees: baseline results from the SHARE Study.

    PubMed

    Siegrist, Johannes; Wahrendorf, Morten; von dem Knesebeck, Olaf; Jürges, Hendrik; Börsch-Supan, Axel

    2007-02-01

    Given the challenge of a high proportion of older employees who retire early from work we analyse associations of indicators of a poor psychosocial quality of work with intended premature departure from work in a large sample of older male and female employees in 10 European countries. Baseline data from the 'Survey of Health, Ageing and Retirement in Europe' (SHARE) were obtained from 3523 men and 3318 women in 10 European countries. Data on intended early retirement, four measures of well-being (self-rated health, depressive symptoms, general symptom load, and quality of life), and quality of work (effort-reward imbalance; low control at work) were obtained from structured interviews and questionnaires. Country-specific and total samples are analysed, using logistic regression analysis. Poor quality of work is significantly associated with intended early retirement. After adjustment for well-being odds ratios (OR) of effort-reward imbalance [OR 1.72 (1.43-2.08)] and low control at work [OR 1.51 (1.27-1.80)] on intended early retirement are observed. Poor quality of work and reduced well-being are independently associated with the intention to retire from work. The consistent association of a poor psychosocial quality of work with intended early retirement among older employees across all European countries under study calls for improved investments into better quality of work, in particular increased control and an appropriate balance between efforts spent and rewards received at work.

  19. Cluster-Randomized Trial of Personalized Site Performance Feedback in Get With The Guidelines-Heart Failure.

    PubMed

    DeVore, Adam D; Cox, Margueritte; Heidenreich, Paul A; Fonarow, Gregg C; Yancy, Clyde W; Eapen, Zubin J; Peterson, Eric D; Hernandez, Adrian F

    2015-07-01

    There is significant variation in the delivery of evidence-based care for patients with heart failure (HF), but there is limited evidence defining the best methods to improve the quality of care. We performed a cluster-randomized trial of personalized site performance feedback at 147 hospitals participating in the Get With The Guidelines-Heart Failure quality improvement program from October 2009 to March 2011. The intervention provided sites with specific data on their heart failure achievement and quality measures in addition to the usual Get With The Guidelines-Heart Failure tools. The primary outcome for our trial was improvement in site composite quality of care score. Overall, 73 hospitals (n=33 886 patients) received the intervention, whereas 74 hospitals (n=37 943 patients) did not. One year after the intervention, both the intervention and control arms had a similar mean change in percentage points in their composite quality score (absolute change, +0.31 [SE, 1.51] versus +3.18 [SE, 1.68] in control; P=0.21). Similarly, none of the individual achievement measures or quality measures improved more at intervention versus control hospitals. Our site-based intervention, which included personalized site feedback on adherence to quality metrics, was not able to elicit more quality improvement beyond that already associated with participation in the Get With The Guidelines-Heart Failure program. URL: http://www.clinicaltrials.gov. Unique identifier: NCT00979264. © 2015 American Heart Association, Inc.

  20. Muscle stretching exercises and resistance training in fibromyalgia: which is better? A three-arm randomized controlled trial.

    PubMed

    Assumpção, Ana; Matsutani, Luciana A; Yuan, Susan L; Santo, Adriana S; Sauer, Juliana; Mango, Pamela; Marques, Amelia P

    2017-11-29

    Exercise therapy is an effective component of fibromyalgia (FM) treatment. However, it is important to know the effects and specificities of the different types of exercise: muscle stretching and resistance training. To verify and compare the effectiveness of muscle stretching exercise and resistance training for symptoms and quality of life in FM patients. Randomized controlled trial. Physical therapy service, FM outpatient clinic. Forty-four women with FM (79 screened). Patients were randomly allocated into a stretching group (n=14), resistance group (n=16), and control group (n=14). Pain was assessed using the visual analog scale, pain threshold using a Fischer dolorimeter, FM symptoms using the Fibromyalgia Impact Questionnaire (FIQ), and quality of life using the Medical Outcomes Study 36-item Short- Form Health Survey (SF-36). The three intervention groups continued with usual medical treatment. In addition, the stretching and resistance groups performed two different exercise programs twice a week for 12 weeks. After treatment, the stretching group showed the highest SF-36 physical functioning score (p=0.01) and the lowest bodily pain score (p=0.01). The resistance group had the lowest FIQ depression score (p=0.02). The control group had the highest score for FIQ morning tiredness and stiffness, and the lowest score for SF-36 vitality. In clinical analyses, the stretching group had significant improvement in quality of life for all SF-36 domains, and the resistance group had significant improvement in FM symptoms and in quality of life for SF-36 domains of physical functioning, vitality, social function, emotional role, and mental health. Muscle stretching exercise was the most effective modality in improving quality of life, especially with regard to physical functioning and pain, and resistance training was the most effective modality in reducing depression. The trial included a control group and two intervention groups, both of which received exercise programs created specifically for patients with FM. In clinical practice, we suggest including both of these modalities in an exercise therapy program for FM.

  1. The Effects of Aromatherapy Massage on Sleep Quality of Nurses on Monthly Rotating Night Shifts

    PubMed Central

    Lin, Chao-Ling

    2017-01-01

    The goal of this study is to examine the effects of aromatherapy massage on sleep quality of nurses with monthly rotating night shifts. Subjects were enrolled at a medical center in central Taiwan with overall score ≥ 5 of Pittsburgh Sleep Quality Index (PSQI) and randomly assigned to the treatment or control groups. They were validated by pretests during their first graveyard shift in the trial period and the sleep quality information was collected by using the PSQI and sleep detectors. During the second graveyard shift, the treatment group received aromatherapy massage and the control group rested in the same aromatherapy room after work. All subjects filled out the PSQI surveys and the sleep quality information was collected during massage or resting and the following night. We found that the total PSQI was significantly decreased in the treatment group following the aromatherapy massage. Specifically, the components such as subjective sleep quality, sleep disturbance, and daytime dysfunction were significantly decreased. However, there were no significant changes of average PSQI scores between the two groups before and after intervention. Taken together, our study suggested that aromatherapy massage could improve sleep quality of nurses with monthly rotating night shift. PMID:28761497

  2. The Effects of Aromatherapy Massage on Sleep Quality of Nurses on Monthly Rotating Night Shifts.

    PubMed

    Chang, Ying-Ying; Lin, Chao-Ling; Chang, Li-Yin

    2017-01-01

    The goal of this study is to examine the effects of aromatherapy massage on sleep quality of nurses with monthly rotating night shifts. Subjects were enrolled at a medical center in central Taiwan with overall score ≥ 5 of Pittsburgh Sleep Quality Index (PSQI) and randomly assigned to the treatment or control groups. They were validated by pretests during their first graveyard shift in the trial period and the sleep quality information was collected by using the PSQI and sleep detectors. During the second graveyard shift, the treatment group received aromatherapy massage and the control group rested in the same aromatherapy room after work. All subjects filled out the PSQI surveys and the sleep quality information was collected during massage or resting and the following night. We found that the total PSQI was significantly decreased in the treatment group following the aromatherapy massage. Specifically, the components such as subjective sleep quality, sleep disturbance, and daytime dysfunction were significantly decreased. However, there were no significant changes of average PSQI scores between the two groups before and after intervention. Taken together, our study suggested that aromatherapy massage could improve sleep quality of nurses with monthly rotating night shift.

  3. Short- and Long-Term Changes in Health-Related Quality of Life with Weight Loss: Results from a Randomized Controlled Trial.

    PubMed

    Pearl, Rebecca L; Wadden, Thomas A; Tronieri, Jena Shaw; Berkowitz, Robert I; Chao, Ariana M; Alamuddin, Naji; Leonard, Sharon M; Carvajal, Raymond; Bakizada, Zayna M; Pinkasavage, Emilie; Gruber, Kathryn A; Walsh, Olivia A; Alfaris, Nasreen

    2018-06-01

    The objective of this study was to determine the effects of weight loss and weight loss maintenance (WLM) on weight-specific health-related quality of life in a 66-week trial. Adults with obesity (N = 137, 86.1% female, 68.6% black, mean age = 46.1 years) who had lost ≥ 5% of initial weight in a 14-week intensive lifestyle intervention/low-calorie diet (LCD) program were randomly assigned to lorcaserin or placebo for an additional 52-week WLM program. The Impact of Weight on Quality of Life-Lite (IWQOL-Lite) scale (including five subscales), Patient Health Questionnaire-9 (depression), and Perceived Stress Scale were administered at the start of the 14-week LCD program, randomization, and week 52 of the randomized controlled trial (i.e., 66 weeks total). Significant improvements in all outcomes, except weight-related public distress, were found following the 14-week LCD program (P values < 0.05). Improvements were largely maintained during the 52-week randomized controlled trial, despite weight regain of 2.0 to 2.5 kg across treatment groups. Participants who lost ≥ 10% of initial weight achieved greater improvements in physical function, self-esteem, sexual life, and the IWQOL-Lite total score than those who lost < 5% and did not differ from those who lost 5% to 9.9%. Improvements in weight-specific health-related quality of life were achieved with moderate weight loss and were sustained during WLM. © 2018 The Obesity Society.

  4. Controlled clinical studies of homeopathy.

    PubMed

    Mathie, Robert T

    2015-10-01

    Observations about controlled clinical trials expressed by Max Haidvogl in the book Ultra High Dilution (1994) have been appraised from a perspective two decades later. The present commentary briefly examines changes in homeopathy research evidence since 1994 as regards: the published number of randomised controlled trials (RCTs), the use of individualised homeopathic intervention, the 'proven efficacy of homeopathy', and the quality of the evidence. The commentary reflects the details of RCTs that are available in a recently published literature review and by scrutiny of systematic reviews of RCTs in homeopathy. The homeopathy RCT literature grew by 309 records in the 18 years that immediately followed Haidvogl's article, with more than a doubling of the proportion that investigated individualised homeopathy. Discounting one prior publication, the entire systematic review literature on homeopathy RCTs post-dates 1994. A total of 36 condition-specific systematic reviews have been identified in the peer-reviewed literature: 16 of them reported positive, or tentatively positive, conclusions about homeopathy's clinical effectiveness; the other 20 were negative or non-conclusive. Reviews typically have been restricted in the strength of their conclusions by the low quality of the original RCT evidence. Three comprehensive systematic reviews concluded, cautiously, that homeopathy may differ from placebo; a fourth such review reached negative conclusions. A recent high-quality meta-analysis concluded that medicines prescribed in individualised homeopathic treatment may have small, specific, effects. Despite important growth in research activity since 1994, concerns about study quality limit the interpretation of available RCT data. The question whether homeopathic intervention differs from placebo awaits decisive answer. Copyright © 2015 The Faculty of Homeopathy. Published by Elsevier Ltd. All rights reserved.

  5. mRNA quality control is bypassed for immediate export of stress-responsive transcripts.

    PubMed

    Zander, Gesa; Hackmann, Alexandra; Bender, Lysann; Becker, Daniel; Lingner, Thomas; Salinas, Gabriela; Krebber, Heike

    2016-12-12

    Cells grow well only in a narrow range of physiological conditions. Surviving extreme conditions requires the instantaneous expression of chaperones that help to overcome stressful situations. To ensure the preferential synthesis of these heat-shock proteins, cells inhibit transcription, pre-mRNA processing and nuclear export of non-heat-shock transcripts, while stress-specific mRNAs are exclusively exported and translated. How cells manage the selective retention of regular transcripts and the simultaneous rapid export of heat-shock mRNAs is largely unknown. In Saccharomyces cerevisiae, the shuttling RNA adaptor proteins Npl3, Gbp2, Hrb1 and Nab2 are loaded co-transcriptionally onto growing pre-mRNAs. For nuclear export, they recruit the export-receptor heterodimer Mex67-Mtr2 (TAP-p15 in humans). Here we show that cellular stress induces the dissociation of Mex67 and its adaptor proteins from regular mRNAs to prevent general mRNA export. At the same time, heat-shock mRNAs are rapidly exported in association with Mex67, without the need for adapters. The immediate co-transcriptional loading of Mex67 onto heat-shock mRNAs involves Hsf1, a heat-shock transcription factor that binds to heat-shock-promoter elements in stress-responsive genes. An important difference between the export modes is that adaptor-protein-bound mRNAs undergo quality control, whereas stress-specific transcripts do not. In fact, regular mRNAs are converted into uncontrolled stress-responsive transcripts if expressed under the control of a heat-shock promoter, suggesting that whether an mRNA undergoes quality control is encrypted therein. Under normal conditions, Mex67 adaptor proteins are recruited for RNA surveillance, with only quality-controlled mRNAs allowed to associate with Mex67 and leave the nucleus. Thus, at the cost of error-free mRNA formation, heat-shock mRNAs are exported and translated without delay, allowing cells to survive extreme situations.

  6. Piloted simulator study of allowable time delays in large-airplane response

    NASA Technical Reports Server (NTRS)

    Grantham, William D.; Bert T.?aetingas, Stephen A.dings with ran; Bert T.?aetingas, Stephen A.dings with ran

    1987-01-01

    A piloted simulation was performed to determine the permissible time delay and phase shift in the flight control system of a specific large transport-type airplane. The study was conducted with a six degree of freedom ground-based simulator and a math model similar to an advanced wide-body jet transport. Time delays in discrete and lagged form were incorporated into the longitudinal, lateral, and directional control systems of the airplane. Three experienced pilots flew simulated approaches and landings with random localizer and glide slope offsets during instrument tracking as their principal evaluation task. Results of the present study suggest a level 1 (satisfactory) handling qualities limit for the effective time delay of 0.15 sec in both the pitch and roll axes, as opposed to a 0.10-sec limit of the present specification (MIL-F-8785C) for both axes. Also, the present results suggest a level 2 (acceptable but unsatisfactory) handling qualities limit for an effective time delay of 0.82 sec and 0.57 sec for the pitch and roll axes, respectively, as opposed to 0.20 sec of the present specifications for both axes. In the area of phase shift between cockpit input and control surface deflection,the results of this study, flown in turbulent air, suggest less severe phase shift limitations for the approach and landing task-approximately 50 deg. in pitch and 40 deg. in roll - as opposed to 15 deg. of the present specifications for both axes.

  7. Mitochondrial quality control and communications with the nucleus are important in maintaining mitochondrial function and cell health☆☆☆

    PubMed Central

    Kotiadis, Vassilios N.; Duchen, Michael R.; Osellame, Laura D.

    2014-01-01

    Background The maintenance of cell metabolism and homeostasis is a fundamental characteristic of living organisms. In eukaryotes, mitochondria are the cornerstone of these life supporting processes, playing leading roles in a host of core cellular functions, including energy transduction, metabolic and calcium signalling, and supporting roles in a number of biosynthetic pathways. The possession of a discrete mitochondrial genome dictates that the maintenance of mitochondrial ‘fitness’ requires quality control mechanisms which involve close communication with the nucleus. Scope of review This review explores the synergistic mechanisms that control mitochondrial quality and function and ensure cellular bioenergetic homeostasis. These include antioxidant defence mechanisms that protect against oxidative damage caused by reactive oxygen species, while regulating signals transduced through such free radicals. Protein homeostasis controls import, folding, and degradation of proteins underpinned by mechanisms that regulate bioenergetic capacity through the mitochondrial unfolded protein response. Autophagic machinery is recruited for mitochondrial turnover through the process of mitophagy. Mitochondria also communicate with the nucleus to exact specific transcriptional responses through retrograde signalling pathways. Major conclusions The outcome of mitochondrial quality control is not only reliant on the efficient operation of the core homeostatic mechanisms but also in the effective interaction of mitochondria with other cellular components, namely the nucleus. General significance Understanding mitochondrial quality control and the interactions between the organelle and the nucleus will be crucial in developing therapies for the plethora of diseases in which the pathophysiology is determined by mitochondrial dysfunction. This article is part of a Special Issue entitled Frontiers of Mitochondrial Research. PMID:24211250

  8. The efficacy of a HUBER exercise system mediated sensorimotor training protocol on proprioceptive system, lumbar movement control and quality of life in patients with chronic non-specific low back pain.

    PubMed

    Letafatkar, Amir; Nazarzadeh, Maryam; Hadadnezhad, Malihe; Farivar, Niloufar

    2017-08-03

    There is a relation between deficits of the proprioceptive system and movement control dysfunction in patients with chronic low back pain (LBP) but, the exact mechanism of this relation is unknown. Exercise therapy has been recognized as an effective method for low back pain treatment. In spite of this, it is not clear which of the various exercise therapy programs lead to better results. Therefore, the present analyze the efficacy of a HUBER study aims to exercise system mediated sensorimotor training protocol on proprioceptive system, lumbar movement control (LMC) and quality of life (QOL) in patients with chronic non-specific LBP. Quasi-experimental study. 53 patients with chronic non-specific LBP (mean age 37.55 ± 6.67 years,and Body Mass Index (BMI) 22.4 ± 3.33) were selected by using Roland-Morris Disability Questionnaire (RMQ) and were assigned into two experimental (N= 27) and control groups (N= 26) The experimental group underwent a five-week (10 sessions) Sensorimotor training by using the Human Body Equalizer (HUBER) spine force under the supervision of an investigator. The movement control battery tests, the HUBER machine testing option, goniometer and visual analogue scale used for movement control, neuromuscular coordination, proprioception and LBP assessment respectively. The assessments were completed in pre-test and after five weeks. The paired and sample T tests were used for data analysis in SPSS program version 18 (Significance level were set at a P value < 0.05). The HUBER system mediated sensorimotor training demonstrated significant improvement in the proprioceptive system, LMC and QOL (P= 0.001). Also There was a significant reduction in the pain scores of subjects with chronic non-specific LBP in the sensorimotor group (P= 0.001). In this study, only the short term effects of the sensorimotor training were examined. The results suggest that a sensorimotor training program causes significant improvement in patients with chronic non-specific LBP. Future research should be carried out with a larger sample size to examine the long term effects of the sensorimotor training program on treatment of patients with chronic non-specific LBP. Considering the efficacy of the sensorimotor training, it is recommended that this intervention should be applied to treatment of patients with chronic non-specific LBP in the future.

  9. Patient specific quality control for Stereotactic Ablative Body Radiotherapy (SABR): it takes more than one phantom

    NASA Astrophysics Data System (ADS)

    Kron, T.; Ungureanu, E.; Antony, R.; Hardcastle, N.; Clements, N.; Ukath, J.; Fox, C.; Lonski, P.; Wanigaratne, D.; Haworth, A.

    2017-01-01

    Stereotactic Ablative Body Radiotherapy (SABR) is an extension of the concepts of Stereotactic Radiosurgery from intracranial procedures to extracranial targets. This brings with it new technological challenges for set-up of a SABR program and continuing quality assurance. Compared with intracranial procedures SABR requires consideration of motion and inhomogeneities and has to deal with a much larger variety of targets ranging from lung to liver, kidney and bone. To meet many of the challenges virtually all advances in modern radiotherapy, such as Intensity Modulated and Image Guided Radiation Therapy (IMRT and IGRT) are used. Considering the few fractions and high doses per fraction delivered to complex targets it is not surprising that patient specific quality control is considered essential for safe delivery. Given the variety of targets and clinical scenarios we employ different strategies for different patients to ensure that the most important aspects of the treatment are appropriately tested, be it steep dose gradients, inhomogeneities or the delivery of dose in the presence of motion. The current paper reviews the different approaches and phantoms utilised at Peter MacCallum Cancer Centre for SABR QA.

  10. The problems and promise of DNA barcodes for species diagnosis of primate biomaterials

    PubMed Central

    Lorenz, Joseph G; Jackson, Whitney E; Beck, Jeanne C; Hanner, Robert

    2005-01-01

    The Integrated Primate Biomaterials and Information Resource (www.IPBIR.org) provides essential research reagents to the scientific community by establishing, verifying, maintaining, and distributing DNA and RNA derived from primate cell cultures. The IPBIR uses mitochondrial cytochrome c oxidase subunit I sequences to verify the identity of samples for quality control purposes in the accession, cell culture, DNA extraction processes and prior to shipping to end users. As a result, IPBIR is accumulating a database of ‘DNA barcodes’ for many species of primates. However, this quality control process is complicated by taxon specific patterns of ‘universal primer’ failure, as well as the amplification or co-amplification of nuclear pseudogenes of mitochondrial origins. To overcome these difficulties, taxon specific primers have been developed, and reverse transcriptase PCR is utilized to exclude these extraneous sequences from amplification. DNA barcoding of primates has applications to conservation and law enforcement. Depositing barcode sequences in a public database, along with primer sequences, trace files and associated quality scores, makes this species identification technique widely accessible. Reference DNA barcode sequences should be derived from, and linked to, specimens of known provenance in web-accessible collections in order to validate this system of molecular diagnostics. PMID:16214744

  11. Assesment of PM10 pollution episodes in a ceramic cluster (NE Spain): proposal of a new quality index for PM10, As, Cd, Ni and Pb.

    PubMed

    Vicente, A B; Sanfeliu, T; Jordan, M M

    2012-10-15

    Environmental pollution control is one of the most important goals in pollution risk assessment today. In this sense, modern and precise tools that allow scientists to evaluate, quantify and predict air pollution are of particular interest. Monitoring atmospheric particulate matter is a challenge faced by the European Union. Specific rules on this subject are being developed (Directive 2004/107/EC, Directive 2008/50/EC) in order to reduce the potential adverse effects on human health caused by air pollution. Air pollution has two sources: natural and anthropogenic. Contributions from natural sources can be assessed but cannot be controlled, while emissions from anthropogenic sources can be controlled; monitoring to reduce this latter type of pollution should therefore be carried out. In this paper, we describe an air quality evaluation in terms of levels of atmospheric particles (PM10), as outlined by European Union legislation, carried out in an industrialised Spanish coastal area over a five-year period with the purpose of comparing these values with those of other areas in the Mediterranean Basin with different weather conditions from North of Europe. The study area is in the province of Castellón. This province is a strategic area in the frame work of European Union (EU) pollution control. Approximately 80% of European ceramic tiles and ceramic frit manufacturers are concentrated in two areas, forming the so-called "ceramics clusters"; ones in Modena (Italy) and the other in Castellón. In this kind of areas, there are a lot of air pollutants from this industry then it is difficult to fulfill de European limits of PM10 so it is necessary to control the air quality in them. The seasonal differences in the number of days in which pollutant level limits were exceeded were evaluated and the sources of contamination were identified. Air quality indexes for each pollutant have been established to determine easily and clearly the quality of air breathed. Furthermore, in accordance with Directive 2008/50/EC, an Air Quality Plan is proposed to protect human health, and the environment as a whole, in the study area. General and specific corrective measures of main emission sources are provided. A strategy for air pollution management is thus presented. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. Comparing intra- and inter-specific effects on litter decomposition in an old-field ecosystem

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Crutsinger, Greg; Sanders, Dr. Nathan James; Classen, Aimee T

    2009-09-01

    Plant species can differ in the quantity and quality of leaf litter they produce, and many studies have examined whether plant species diversity affects leaf-litter decomposition and nutrient release. A growing number of studies have indicated that intra-specific variation within plant species can also affect key ecosystem processes. However, the relative importance of intra- versus inter-specific variation for the functioning of ecosystems remains poorly known. Here, we investigate the effects of intra-specific variation in a dominant old-field plant species, tall goldenrod (Solidago altissima), and inter-specific variation among goldenrod species on litter quality, decomposition, and nitrogen (N) release. We found thatmore » the nutrient concentration of leaf litter varied among genotypes, which translated into 50% difference in decomposition rates. Variation among other goldenrod species in decomposition rate was more than twice that of genetic variation within S. altissima. Furthermore, by manipulating litterbags to contain 1, 3, 6, or 9 genotypes, we found that S. altissima genotype identity had much stronger effects than did genotypic diversity on leaf-litter quality, decomposition, and N release. Taken together, these results suggest that the order of ecological importance for controlling leaf-litter decomposition and N release dynamics is plant species identitygenotype identity>genotypic diversity.« less

  13. Ion-Specific Nutrient Management in Closed Systems: The Necessity for Ion-Selective Sensors in Terrestrial and Space-Based Agriculture and Water Management Systems

    PubMed Central

    Bamsey, Matthew; Graham, Thomas; Thompson, Cody; Berinstain, Alain; Scott, Alan; Dixon, Michael

    2012-01-01

    The ability to monitor and control plant nutrient ions in fertigation solutions, on an ion-specific basis, is critical to the future of controlled environment agriculture crop production, be it in traditional terrestrial settings (e.g., greenhouse crop production) or as a component of bioregenerative life support systems for long duration space exploration. Several technologies are currently available that can provide the required measurement of ion-specific activities in solution. The greenhouse sector has invested in research examining the potential of a number of these technologies to meet the industry's demanding requirements, and although no ideal solution yet exists for on-line measurement, growers do utilize technologies such as high-performance liquid chromatography to provide off-line measurements. An analogous situation exists on the International Space Station where, technological solutions are sought, but currently on-orbit water quality monitoring is considerably restricted. This paper examines the specific advantages that on-line ion-selective sensors could provide to plant production systems both terrestrially and when utilized in space-based biological life support systems and how similar technologies could be applied to nominal on-orbit water quality monitoring. A historical development and technical review of the various ion-selective monitoring technologies is provided. PMID:23201999

  14. Ion-specific nutrient management in closed systems: the necessity for ion-selective sensors in terrestrial and space-based agriculture and water management systems.

    PubMed

    Bamsey, Matthew; Graham, Thomas; Thompson, Cody; Berinstain, Alain; Scott, Alan; Dixon, Michael

    2012-10-01

    The ability to monitor and control plant nutrient ions in fertigation solutions, on an ion-specific basis, is critical to the future of controlled environment agriculture crop production, be it in traditional terrestrial settings (e.g., greenhouse crop production) or as a component of bioregenerative life support systems for long duration space exploration. Several technologies are currently available that can provide the required measurement of ion-specific activities in solution. The greenhouse sector has invested in research examining the potential of a number of these technologies to meet the industry's demanding requirements, and although no ideal solution yet exists for on-line measurement, growers do utilize technologies such as high-performance liquid chromatography to provide off-line measurements. An analogous situation exists on the International Space Station where, technological solutions are sought, but currently on-orbit water quality monitoring is considerably restricted. This paper examines the specific advantages that on-line ion-selective sensors could provide to plant production systems both terrestrially and when utilized in space-based biological life support systems and how similar technologies could be applied to nominal on-orbit water quality monitoring. A historical development and technical review of the various ion-selective monitoring technologies is provided.

  15. 33 CFR 325.4 - Conditioning of permits.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., the Endangered Species Act, and requirements imposed by conditions on state section 401 water quality certifications. (2) Where appropriate, the district engineer may take into account the existence of controls... off-site for mitigation of significant losses which are specifically identifiable, reasonably likely...

  16. Improved rice method for determining theoretical maximum density of asphalt paving mixtures

    DOT National Transportation Integrated Search

    1992-05-01

    Rice method (ASTM D2041 ) is used for determining the theoretical maximum specific gravity of asphalt paving mixtures which is one of the main test parameters used for mix design and construction quality control. The repeatability and reproducibility...

  17. 30 CFR 75.335 - Seal strengths, design applications, and installation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... properties, construction specifications, quality control, design references, and other information related to... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Seal strengths, design applications, and... Seal strengths, design applications, and installation. (a) Seal strengths. Seals constructed on or...

  18. 30 CFR 75.335 - Seal strengths, design applications, and installation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... properties, construction specifications, quality control, design references, and other information related to... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Seal strengths, design applications, and... Seal strengths, design applications, and installation. (a) Seal strengths. Seals constructed on or...

  19. 30 CFR 75.335 - Seal strengths, design applications, and installation.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... properties, construction specifications, quality control, design references, and other information related to... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Seal strengths, design applications, and... Seal strengths, design applications, and installation. (a) Seal strengths. Seals constructed on or...

  20. 30 CFR 75.335 - Seal strengths, design applications, and installation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... properties, construction specifications, quality control, design references, and other information related to... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Seal strengths, design applications, and... Seal strengths, design applications, and installation. (a) Seal strengths. Seals constructed on or...

  1. 30 CFR 75.335 - Seal strengths, design applications, and installation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... properties, construction specifications, quality control, design references, and other information related to... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Seal strengths, design applications, and... Seal strengths, design applications, and installation. (a) Seal strengths. Seals constructed on or...

  2. Advances in photonic MOEMS-MEMS device thinning and polishing

    NASA Astrophysics Data System (ADS)

    McAneny, James J.; Kennedy, Mark; McGroggan, Tom

    2010-02-01

    As devices continue to increase in density and complexity, ever more stringent specifications are placed on the wafer scale equipment manufacturers to produce higher quality and higher output. This results in greater investment and more resource being diverted into producing tools and processes which can meet the latest demanding criteria. Substrate materials employed in the fabrication process range from Silicon through InP and include GaAs, InSb and other optical networking or waveguide materials. With this diversity of substrate materials presented, controlling the geometries and surfaces grows progressively more challenging. This article highlights the key parameters which require close monitoring and control in order to produce highly precise wafers as part of the fabrication process. Several as cut and commercially available standard polished wafer materials were used in empirical trials to test tooling options in generating high levels of geometric control over the dimensions while producing high quality surface finishes. Specific attention was given to the measurement and control of: flatness; parallelism/TTV; surface roughness and final target thickness as common specifications required by the industry. By combining the process variables of: plate speed, download pressure, slurry flow rate and concentration, pad type and wafer travel path across the polish pad, the effect of altering these variables was recorded and analysed to realize the optimum process conditions for the materials under test. The results being then used to design improved methods and tooling for the thinning and polishing of photonic materials applied to MOEMS-MEMS device fabrication.

  3. Model assessment of atmospheric pollution control schemes for critical emission regions

    NASA Astrophysics Data System (ADS)

    Zhai, Shixian; An, Xingqin; Liu, Zhao; Sun, Zhaobin; Hou, Qing

    2016-01-01

    In recent years, the atmospheric environment in portions of China has become significantly degraded and the need for emission controls has become urgent. Because more international events are being planned, it is important to implement air quality assurance targeted at significant events held over specific periods of time. This study sets Yanqihu (YQH), Beijing, the location of the 2014 Beijing APEC (Asia-Pacific Economic Cooperation) summit, as the target region. By using the atmospheric inversion model FLEXPART, we determined the sensitive source zones that had the greatest impact on the air quality of the YQH region in November 2012. We then used the air-quality model Models-3/CMAQ and a high-resolution emissions inventory of the Beijing-Tianjian-Hebei region to establish emission reduction tests for the entire source area and for specific sensitive source zones. This was achieved by initiating emission reduction schemes at different ratios and different times. The results showed that initiating a moderate reduction of emissions days prior to a potential event is more beneficial to the air quality of Beijing than initiating a high-strength reduction campaign on the day of the event. The sensitive source zone of Beijing (BJ-Sens) accounts for 54.2% of the total source area of Beijing (BJ), but its reduction effect reaches 89%-100% of the total area, with a reduction efficiency 1.6-1.9 times greater than that of the entire area. The sensitive source zone of Huabei (HuaB-Sens.) only represents 17.6% of the total area of Huabei (HuaB), but its emission reduction effect reaches 59%-97% of the entire area, with a reduction efficiency 4.2-5.5 times greater than that of the total area. The earlier that emission reduction measures are implemented, the greater the effect they have on preventing the transmission of pollutants. In addition, expanding the controlling areas to sensitive provinces and cities around Beijing (HuaB-sens) can significantly accelerate the reduction effects compared to controlling measures only in the Beijing sensitive source zone (BJ-Sens). Therefore, when enacting emission reduction schemes, cooperating with surrounding provinces and cities, as well as narrowing the reduction scope to specific sensitive source zones prior to unfavorable meteorological conditions, can help reduce emissions control costs and improve the efficiency and maneuverability of emission reduction schemes.

  4. Current quality of cardiovascular prevention for Million Hearts: an analysis of 147,038 outpatients from The Guideline Advantage.

    PubMed

    Eapen, Zubin J; Liang, Li; Shubrook, Jay H; Bauman, Mary A; Bufalino, Vincent J; Bhatt, Deepak L; Peterson, Eric D; Hernandez, Adrian F

    2014-09-01

    Million Hearts is a national initiative to prevent 1 million heart attacks and strokes over 5 years. The degree to which outpatient providers are controlling risk factors has not been fully described. We examined adherence to the Million Hearts clinical quality measures using The Guideline Advantage, a nationwide quality improvement program for outpatient care. Specifically, we determined the proportion of patients with (1) ischemic vascular disease who were prescribed an antiplatelet drug; (2) hypertension whose blood pressure was controlled; (3) diabetes mellitus whose most recent low-density lipoprotein cholesterol level was <100 mg/dL; and 4) a tobacco use screening and who received a smoking cessation intervention as needed. From January 1, 2010, to March 31, 2012, there were 147,038 patients enrolled from 25 US practices. At the practice level, antiplatelet prescription ranged from 50.0% to 82.3% (median 71.9%, interquartile range [IQR] 66.7-82.1), hypertension control ranged from 48.6% to 75.3% (median 66.6%, IQR 60.1-70.9), hyperlipidemia control among patients with diabetes mellitus ranged from 53.3% to 100.0% (median 75.8%, IQR 65.8-83.0), and tobacco use screening and intervention ranged from 31.0% to 98.8% (median 79.8%, IQR 72.0-83.2). Black and people of color races were associated with a lower likelihood of blood pressure control and cholesterol control. Female gender was associated with a lower likelihood of antiplatelet prescription and cholesterol control. Compliance with quality measures for the Million Hearts initiative varies widely and is notable for racial and gender disparities. Our findings identify multiple opportunities to improve the quality of cardiovascular prevention. Copyright © 2014 Mosby, Inc. All rights reserved.

  5. The Value of clean water: The public's willingness to pay for boatable, fishable, and swimmable quality water

    NASA Astrophysics Data System (ADS)

    Carson, Richard T.; Mitchell, Robert Cameron

    1993-07-01

    This paper presents the findings of a study designed to determine the national benefits of freshwater pollution control. By using data from a national contingent valuation survey, we estimate the aggregate benefits of meeting the goals of the Clean Water Act. A valuation function is estimated which depicts willingness to pay as a function of water quality, income, and other variables. Several validation checks and tests for specific biases are performed, and the benefit estimates are corrected for missing and invalid responses. The two major policy implications from our work are that the benefits and costs of water pollution control efforts are roughly equal and that many of the new policy actions necessary to ensure that all water bodies reach at least a swimmable quality level will not have positive net benefits.

  6. A design space exploration for control of Critical Quality Attributes of mAb.

    PubMed

    Bhatia, Hemlata; Read, Erik; Agarabi, Cyrus; Brorson, Kurt; Lute, Scott; Yoon, Seongkyu

    2016-10-15

    A unique "design space (DSp) exploration strategy," defined as a function of four key scenarios, was successfully integrated and validated to enhance the DSp building exercise, by increasing the accuracy of analyses and interpretation of processed data. The four key scenarios, defining the strategy, were based on cumulative analyses of individual models developed for the Critical Quality Attributes (23 Glycan Profiles) considered for the study. The analyses of the CQA estimates and model performances were interpreted as (1) Inside Specification/Significant Model (2) Inside Specification/Non-significant Model (3) Outside Specification/Significant Model (4) Outside Specification/Non-significant Model. Each scenario was defined and illustrated through individual models of CQA aligning the description. The R(2), Q(2), Model Validity and Model Reproducibility estimates of G2, G2FaGbGN, G0 and G2FaG2, respectively, signified the four scenarios stated above. Through further optimizations, including the estimation of Edge of Failure and Set Point Analysis, wider and accurate DSps were created for each scenario, establishing critical functional relationship between Critical Process Parameters (CPPs) and Critical Quality Attributes (CQAs). A DSp provides the optimal region for systematic evaluation, mechanistic understanding and refining of a QbD approach. DSp exploration strategy will aid the critical process of consistently and reproducibly achieving predefined quality of a product throughout its lifecycle. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. [Study on UPLC specific chromatogram of Lily and its specific peaks compositions analysis by QTOF-MS].

    PubMed

    Nie, Hui; Yan, Hui; Qian, Da-Wei; Duan, Jin-Ao; Ou, Yang-Zhen; Qian, Ye-Fei; Guan, Han-Liang

    2013-07-01

    To establish the UPLC specific chromatogram of Lily and analyze the specific peaks compositions by ESI-QTOF-MS. The samples were conducted by ACQUITY UPLC BEH C18 Column (2.1 mm x 100 mm, 1.7 microm) and eluted with acetonitrile and 0.1% formic acid at the flow rate of 0.4 mL/min. The detection wavelength was set at 320 nm and column temperature was 35 degrees C. Negative ion mode was chosen for qualitative analysis. The capillary voltage was set at 3.0 kV. The nebulization gas was set to 600 L/h at 350 degrees C, and the source temperature was 120 degrees C. The specific chromatogram of Lily was obtained. There were 19 common peaks. Twelve phenylpropenoid glycerides compositions were identified. Among them, 6 compositions were identified by comparison with the reference substances and others were identified by MS and MS2 data. UPLC specific chromatogram can be used for the quality evaluation of Lily, giving support to quality control comprehensively.

  8. [Differentiation of coding quality in orthopaedics by special, illustration-oriented case group analysis in the G-DRG System 2005].

    PubMed

    Schütz, U; Reichel, H; Dreinhöfer, K

    2007-01-01

    We introduce a grouping system for clinical practice which allows the separation of DRG coding in specific orthopaedic groups based on anatomic regions, operative procedures, therapeutic interventions and morbidity equivalent diagnosis groups. With this, a differentiated aim-oriented analysis of illustrated internal DRG data becomes possible. The group-specific difference of the coding quality between the DRG groups following primary coding by the orthopaedic surgeon and final coding by the medical controlling is analysed. In a consecutive series of 1600 patients parallel documentation and group-specific comparison of the relevant DRG parameters were carried out in every case after primary and final coding. Analysing the group-specific share in the additional CaseMix coding, the group "spine surgery" dominated, closely followed by the groups "arthroplasty" and "surgery due to infection, tumours, diabetes". Altogether, additional cost-weight-relevant coding was necessary most frequently in the latter group (84%), followed by group "spine surgery" (65%). In DRGs representing conservative orthopaedic treatment documented procedures had nearly no influence on the cost weight. The introduced system of case group analysis in internal DRG documentation can lead to the detection of specific problems in primary coding and cost-weight relevant changes of the case mix. As an instrument for internal process control in the orthopaedic field, it can serve as a communicative interface between an economically oriented classification of the hospital performance and a specific problem solution of the medical staff involved in the department management.

  9. WHO Expert Committee on Specifications for Pharmaceutical Preparations.

    PubMed

    2011-01-01

    The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines. Standards are developed by the Committee through worldwide consultation and an international consensus-building process. The following new guidelines were adopted and recommended for use: procedure for adoption of International Chemical Reference Substances; WHO good practices for pharmaceutical microbiology laboratories; good manufacturing practices: main principles for pharmaceutical products; good manufacturing practices for blood establishments (jointly with the Expert Committee on Biological Standardization); guidelines on good manufacturing practices for heating, ventilation and air-conditioning systems for non-sterile pharmaceutical dosage forms; good manufacturing practices for sterile pharmaceutical products; guidelines on transfer of technology in pharmaceutical manufacturing; good pharmacy practice: standards for quality of pharmacy services (joint FIP/WHO); model guidance for the storage and transport of time- and temperature-sensitive pharmaceutical products (jointly with the Expert Committee on Biological Standardization); procedure for prequalification of pharmaceutical products; guide on submission of documentation for prequalification of innovator finished pharmaceutical products approved by stringent regulatory authorities; prequalification of quality control laboratories: procedure for assessing the acceptability, in principle, of quality control laboratories for use by United Nations agencies; guidelines for preparing a laboratory information file; guidelines for drafting a site master file; guidelines on submission of documentation for a multisource (generic) finished product: general format: preparation of product dossiers in common technical document format.

  10. Analysis of tissue specific progenitor cell differentiation using FT-IR

    NASA Astrophysics Data System (ADS)

    Ishii, Katsunori; Kimura, Akinori; Kushibiki, Toshihiro; Awazu, Kunio

    2007-07-01

    Tissue specific progenitor cells and its differentiations have got a lot of attentions in regenerative medicine. The process of differentiations, the formation of tissues, has become better understood by the study using a lot of cell types progressively. These studies of cells and tissue dynamics at molecular levels are carried out through various approaches like histochemical methods, application of molecular biology and immunology. However, in case of using regenerative sources (cells, tissues and biomaterials etc.) clinically, they are measured and quality-controlled by non-contact and non-destructive methods from the view point of safety. Or the analysis with small quantities of materials could be possible if the quantities of materials are acceptable. A non-contact and non-destructive quality control method has been required. Recently, the use of Fourier Transform Infrared spectroscopy (FT-IR) has been used to monitor biochemical changes in cells, and has gained considerable importance. The changes in the cells and tissues, which are subtle and often not obvious in the histpathological studies, are shown to be well resolved using FT-IR. Moreover, although most techniques designed to detect one or a few changes, FT-IR is possible to identify the changes in the levels of various cellular biochemicals simultaneously under in vivo and in vitro conditions. The objective of this study is to establish the infrared spectroscopy of tissue specific progenitor cell differentiations as a quality control of cell sources for regenerative medicine. In the present study, as a basic study, we examine the adipose differentiation kinetics of preadipose cells (3T3-L1) and the osteoblast differentiation kinetics of mesenchymal stem cells (Kusa-A1) to analyze the infrared absorption spectra.

  11. Patient-Reported Outcomes for Quality of Life Assessment in Atrial Fibrillation: A Systematic Review of Measurement Properties.

    PubMed

    Kotecha, Dipak; Ahmed, Amar; Calvert, Melanie; Lencioni, Mauro; Terwee, Caroline B; Lane, Deirdre A

    2016-01-01

    Atrial fibrillation is a large and growing burden across all types of healthcare. Both incidence and prevalence are expected to double in the next 20 years, with huge impact on hospital admissions, costs and patient quality of life. Patient wellbeing determines the management strategy for atrial fibrillation, including the use of rhythm control therapy and the clinical success of heart rate control. Hence, evaluation of quality of life is an emerging and important part of the assessment of patients with atrial fibrillation. Although a number of questionnaires to assess quality of life in atrial fibrillation are available, a comprehensive overview of their measurement properties is lacking. We performed a systematic review of the measurement properties of atrial fibrillation-specific health-related quality of life questionnaires. Methodological quality was assessed using the Consensus based Standards for selection of health Measurement Instruments (COSMIN) checklist, with measurement properties rated for quality against optimal criteria and levels of evidence. We screened 2,216 articles, of which eight articles describing five questionnaires were eligible for inclusion: Atrial Fibrillation 6 (AF6), Atrial Fibrillation Effect on QualiTy-of-Life (AFEQT), Atrial Fibrillation Quality of Life Questionnaire (AFQLQ), Atrial Fibrillation Quality of Life (AFQoL), and Quality of Life in Atrial Fibrillation (QLAF). Good reliability (internal consistency and test-retest reliability) was demonstrated for AF6, AFEQT, AFQLQ and AFQoL. Content, construct and criterion validity were positively rated only in AFEQT. Responsiveness was positively rated only in AFEQT, but with limited evidence. Overall, AFEQT showed strong positive evidence for 2 of 9 measurement properties, compared to one for AFQoL and none for the remaining questionnaires. Given the low ratings for many measurement properties, no single questionnaire can be recommended, although AFEQT performed strongest. Further studies to robustly assess reliability, validity and responsiveness of AF-specific quality of life questionnaires are required. This review consolidates the current evidence for quality of life assessment in patients with atrial fibrillation and identifies priority areas for future research.

  12. Quality and productivity drive innovation and improvement at United Technologies Aerospace Operations, Inc.

    NASA Technical Reports Server (NTRS)

    Jamar, L. G.

    1986-01-01

    Quality and innovation are the hallmarks of the national space program. In programs that preceded the Shuttle Program the emphasis was on meeting the risks and technical challenges of space with safety, quality, reliability, and success. At United Technologies Aerospace Operations, Inc. (UTAO), the battle has developed along four primary fronts. These fronts include programs to motivate and reward people, development and construction of optimized processes and facilities, implementation of specifically tailored management systems, and the application of appropriate measurement and control systems. Each of these initiatives is described. However, to put this quality and productivity program in perspective, UTAO and its role in the Shuttle Program are described first.

  13. Quality assurance and organizational effectiveness in hospitals.

    PubMed Central

    Hetherington, R W

    1982-01-01

    The purpose of this paper is to explore some aspects of a general theoretical model within which research on the organizational impacts of quality assurance programs in hospitals may be examined. Quality assurance is conceptualized as an organizational control mechanism, operating primarily through increased formalization of structures and specification of procedures. Organizational effectiveness is discussed from the perspective of the problem-solving theory of organizations, wherein effective organizations are those which maintain at least average performance in all four system problem areas simultaneously (goal-attainment, integration, adaptation and pattern-maintenance). It is proposed that through the realization of mutual benefits for both professionals and the bureaucracy, quality assurance programs can maximize such effective performance in hospitals. PMID:7096096

  14. Communicating and visualizing data quality through Web Map Services

    NASA Astrophysics Data System (ADS)

    Roberts, Charles; Blower, Jon; Maso, Joan; Diaz, Daniel; Griffiths, Guy; Lewis, Jane

    2014-05-01

    The sharing and visualization of environmental data through OGC Web Map Services is becoming increasingly common. However, information about the quality of data is rarely presented. (In this presentation we consider mostly data uncertainty as a measure of quality, although we acknowledge that many other quality measures are relevant to the geoscience community.) In the context of the GeoViQua project (http://www.geoviqua.org) we have developed conventions and tools for using WMS to deliver data quality information. The "WMS-Q" convention describes how the WMS specification can be used to publish quality information at the level of datasets, variables and individual pixels (samples). WMS-Q requires no extensions to the WMS 1.3.0 specification, being entirely backward-compatible. (An earlier version of WMS-Q was published as OGC Engineering Report 12-160.) To complement the WMS-Q convention, we have also developed extensions to the OGC Symbology Encoding (SE) specification, enabling uncertain geoscience data to be portrayed using a variety of visualization techniques. These include contours, stippling, blackening, whitening, opacity, bivariate colour maps, confidence interval triangles and glyphs. There may also be more extensive applications of these methods beyond the visual representation of uncertainty. In this presentation we will briefly describe the scope of the WMS-Q and "extended SE" specifications and then demonstrate the innovations using open-source software based upon ncWMS (http://ncwms.sf.net). We apply the tools to a variety of datasets including Earth Observation data from the European Space Agency's Climate Change Initiative. The software allows uncertain raster data to be shared through Web Map Services, giving the user fine control over data visualization.

  15. Effect of time delay on flying qualities: An update

    NASA Technical Reports Server (NTRS)

    Smith, R. E.; Sarrafian, S. K.

    1986-01-01

    Flying qualities problems of modern, full-authority electronic flight control systems are most often related to the introduction of additional time delay in aircraft response to a pilot input. These delays can have a significant effect on the flying qualities of the aircraft. Time delay effects are reexamined in light of recent flight test experience with aircraft incorporating new technology. Data from the X-29A forward-swept-wing demonstrator, a related preliminary in-flight experiment, and other flight observations are presented. These data suggest that the present MIL-F-8785C allowable-control system time delay specifications are inadequate or, at least, incomplete. Allowable time delay appears to be a function of the shape of the aircraft response following the initial delay. The cockpit feel system is discussed as a dynamic element in the flight control system. Data presented indicate that the time delay associated with a significant low-frequency feel system does not result in the predicted degradation in aircraft flying qualities. The impact of the feel system is discussed from two viewpoints: as a filter in the control system which can alter the initial response shape and, therefore, the allowable time delay, and as a unique dynamic element whose delay contribution can potentially be discounted by special pilot loop closures.

  16. Impact on seniors of the patient-centered medical home: evidence from a pilot study.

    PubMed

    Fishman, Paul A; Johnson, Eric A; Coleman, Kathryn; Larson, Eric B; Hsu, Clarissa; Ross, Tyler R; Liss, David; Tufano, James; Reid, Robert J

    2012-10-01

    To assess the impact on health care cost and quality among seniors of a patient-centered medical home (PCMH) pilot at Group Health Cooperative, an integrated health care system in Washington State. A prospective before-and-after evaluation of the experience of seniors receiving primary care services at 1 pilot clinic compared with seniors enrolled at the remaining 19 primary care clinics owned and operated by Group Health. Analyses of secondary data on quality and cost were conducted for 1,947 seniors in the PCMH clinic and 39,396 seniors in the 19 control clinics. Patient experience with care was based on survey data collected from 487 seniors in the PCMH clinic and of 668 in 2 specific control clinics that were selected for their similarities in organization and patient composition to the pilot clinic. After adjusting for baseline, seniors in the PCMH clinic reported higher ratings than controls on 3 of 7 patient experience scales. Seniors in the PCMH clinic had significantly greater quality outcomes over time, but this difference was not significant relative to control. PCMH patients used more e-mail, phone, and specialist visits but fewer emergency services and inpatient admissions for ambulatory care sensitive conditions. At 1 and 2 years, the PCMH and control clinics did not differ significantly in overall costs. A PCMH redesign can be associated with improvements in patient experience and quality without increasing overall cost.

  17. Evaluation of droplet digital PCR for quantification of residual leucocytes in red blood cell concentrates.

    PubMed

    Doescher, A; Loges, U; Petershofen, E K; Müller, T H

    2017-11-01

    Enumeration of residual white blood cells in leucoreduced blood components is essential part of quality control. Digital PCR has substantially facilitated quantitative PCR and was thus evaluated for measurements of leucocytes. Target for quantification of leucocytes by digital droplet PCR was the blood group gene RHCE. The SPEF1 gene was added as internal control for the entire assay starting with automated DNA extraction. The sensitivity of the method was determined by serial dilutions of standard samples. Quality control samples were analysed within 24 h, 7 days and 6 months after collection. Routine samples from leucodepleted red blood cell concentrates (n = 150) were evaluated in parallel by flow-cytometry (LeucoCount) and by digital PCR. Digital PCR reliably detected at least 0·4 leucocytes per assay. The mean difference between PCR and flow-cytometric results from 150 units was -0·01 (±1·0). DNA samples were stable for up to at least six months. PCR measurement of leucocytes in samples from plasma and platelet concentrates also provided valid results in a pilot study. Droplet digital PCR to enumerate leucocytes offers an alternative for quality control of leucoreduced blood products. Sensitivity, specificity and reproducibility are comparable to flow-cytometry. The option to collect samples over an extended period of time and the automatization introduce attractive features for routine quality control. © 2017 International Society of Blood Transfusion.

  18. Identification of quality markers of Yuanhu Zhitong tablets based on integrative pharmacology and data mining.

    PubMed

    Li, Ke; Li, Junfang; Su, Jin; Xiao, Xuefeng; Peng, Xiujuan; Liu, Feng; Li, Defeng; Zhang, Yi; Chong, Tao; Xu, Haiyu; Liu, Changxiao; Yang, Hongjun

    2018-03-07

    The quality evaluation of traditional Chinese medicine (TCM) formulations is needed to guarantee the safety and efficacy. In our laboratory, we established interaction rules between chemical quality control and biological activity evaluations to study Yuanhu Zhitong tablets (YZTs). Moreover, a quality marker (Q-marker) has recently been proposed as a new concept in the quality control of TCM. However, no appropriate methods are available for the identification of Q-markers from the complex TCM systems. We aimed to use an integrative pharmacological (IP) approach to further identify Q-markers from YZTs through the integration of multidisciplinary knowledge. In addition, data mining was used to determine the correlation between multiple constituents of this TCM and its bioactivity to improve quality control. The IP approach was used to identify the active constituents of YZTs and elucidate the molecular mechanisms by integrating chemical and biosynthetic analyses, drug metabolism, and network pharmacology. Data mining methods including grey relational analysis (GRA) and least squares support vector machine (LS-SVM) regression techniques, were used to establish the correlations among the constituents and efficacy, and dose efficacy in multiple dimensions. Seven constituents (tetrahydropalmatine, α-allocryptopine, protopine, corydaline, imperatorin, isoimperatorin, and byakangelicin) were identified as Q-markers of YZT using IP based on their high abundance, specific presence in the individual herbal constituents and the product, appropriate drug-like properties, and critical contribution to the bioactivity of the mixture of YZT constituents. Moreover, three Q-markers (protopine, α-allocryptopine, and corydaline) were highly correlated with the multiple bioactivities of the YZTs, as found using data mining. Finally, three constituents (tetrahydropalmatine, corydaline, and imperatorin) were chosen as minimum combinations that both distinguished the authentic components from false products and indicated the intensity of bioactivity to improve the quality control of YZTs. Tetrahydropalmatine, imperatorin, and corydaline could be used as minimum combinations to effectively control the quality of YZTs. Copyright © 2018. Published by Elsevier GmbH.

  19. Taking advantage of ground data systems attributes to achieve quality results in testing software

    NASA Technical Reports Server (NTRS)

    Sigman, Clayton B.; Koslosky, John T.; Hageman, Barbara H.

    1994-01-01

    During the software development life cycle process, basic testing starts with the development team. At the end of the development process, an acceptance test is performed for the user to ensure that the deliverable is acceptable. Ideally, the delivery is an operational product with zero defects. However, the goal of zero defects is normally not achieved but is successful to various degrees. With the emphasis on building low cost ground support systems while maintaining a quality product, a key element in the test process is simulator capability. This paper reviews the Transportable Payload Operations Control Center (TPOCC) Advanced Spacecraft Simulator (TASS) test tool that is used in the acceptance test process for unmanned satellite operations control centers. The TASS is designed to support the development, test and operational environments of the Goddard Space Flight Center (GSFC) operations control centers. The TASS uses the same basic architecture as the operations control center. This architecture is characterized by its use of distributed processing, industry standards, commercial off-the-shelf (COTS) hardware and software components, and reusable software. The TASS uses much of the same TPOCC architecture and reusable software that the operations control center developer uses. The TASS also makes use of reusable simulator software in the mission specific versions of the TASS. Very little new software needs to be developed, mainly mission specific telemetry communication and command processing software. By taking advantage of the ground data system attributes, successful software reuse for operational systems provides the opportunity to extend the reuse concept into the test area. Consistency in test approach is a major step in achieving quality results.

  20. Impact of feedstock quality and variation on biochemical and thermochemical conversion

    DOE PAGES

    Li, Chenlin; Aston, John E.; Lacey, Jeffrey A.; ...

    2016-07-21

    The production of biofuels from lignocellulosic feedstock is attracting considerable attention in the United States and globally as a strategy to diversify energy resources, spur regional economic development and reduce greenhouse gas emissions. Because of the wide variation in feedstock types, compositions and content of convertible organics, there is a growing need to better understand correlations among feedstock quality attributes and conversion performance. Knowledge of the feedstock impact on conversion is essential to supply quality controlled, uniform and on-spec feedstocks to biorefineries. This review paper informs the development of meaningful feedstock quality specifications for different conversion processes. Discussions are focusedmore » on how compositional properties of feedstocks affect various unit operations in biochemical conversion processes, fast pyrolysis and hydrothermal liquefaction. In addition, future perspectives are discussed that focus on the challenges and prospects of addressing compositionally intrinsic inhibitors through feedstock preprocessing at regionally distributed depots. As a result, such preprocessing depots may allow for the commoditization of lignocellulosic feedstock and realization of stable, cost-effective and quality controlled biomass supply systems.« less

  1. Benefits of physical exercise training on cognition and quality of life in frail older adults.

    PubMed

    Langlois, Francis; Vu, Thien Tuong Minh; Chassé, Kathleen; Dupuis, Gilles; Kergoat, Marie-Jeanne; Bherer, Louis

    2013-05-01

    Frailty is a state of vulnerability associated with increased risks of fall, hospitalization, cognitive deficits, and psychological distress. Studies with healthy senior suggest that physical exercise can help improve cognition and quality of life. Whether frail older adults can show such benefits remains to be documented. A total of 83 participants aged 61-89 years were assigned to an exercise-training group (3 times a week for 12 weeks) or a control group (waiting list). Frailty was determined by a complete geriatric examination using specific criteria. Pre- and post-test measures assessed physical capacity, cognitive performance, and quality of life. Compared with controls, the intervention group showed significant improvement in physical capacity (functional capacities and physical endurance), cognitive performance (executive functions, processing speed, and working memory), and quality of life (global quality of life, leisure activities, physical capacity, social/family relationships, and physical health). Benefits were overall equivalent between frail and nonfrail participants. Physical exercise training leads to improved cognitive functioning and psychological well-being in frail older adults.

  2. Impact of feedstock quality and variation on biochemical and thermochemical conversion

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Li, Chenlin; Aston, John E.; Lacey, Jeffrey A.

    The production of biofuels from lignocellulosic feedstock is attracting considerable attention in the United States and globally as a strategy to diversify energy resources, spur regional economic development and reduce greenhouse gas emissions. Because of the wide variation in feedstock types, compositions and content of convertible organics, there is a growing need to better understand correlations among feedstock quality attributes and conversion performance. Knowledge of the feedstock impact on conversion is essential to supply quality controlled, uniform and on-spec feedstocks to biorefineries. This review paper informs the development of meaningful feedstock quality specifications for different conversion processes. Discussions are focusedmore » on how compositional properties of feedstocks affect various unit operations in biochemical conversion processes, fast pyrolysis and hydrothermal liquefaction. In addition, future perspectives are discussed that focus on the challenges and prospects of addressing compositionally intrinsic inhibitors through feedstock preprocessing at regionally distributed depots. As a result, such preprocessing depots may allow for the commoditization of lignocellulosic feedstock and realization of stable, cost-effective and quality controlled biomass supply systems.« less

  3. MO-A-16A-01: QA Procedures and Metrics: In Search of QA Usability

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sathiaseelan, V; Thomadsen, B

    Radiation therapy has undergone considerable changes in the past two decades with a surge of new technology and treatment delivery methods. The complexity of radiation therapy treatments has increased and there has been increased awareness and publicity about the associated risks. In response, there has been proliferation of guidelines for medical physicists to adopt to ensure that treatments are delivered safely. Task Group recommendations are copious, and clinical physicists' hours are longer, stretched to various degrees between site planning and management, IT support, physics QA, and treatment planning responsibilities.Radiation oncology has many quality control practices in place to ensure themore » delivery of high-quality, safe treatments. Incident reporting systems have been developed to collect statistics about near miss events at many radiation oncology centers. However, tools are lacking to assess the impact of these various control measures. A recent effort to address this shortcoming is the work of Ford et al (2012) who recently published a methodology enumerating quality control quantification for measuring the effectiveness of safety barriers. Over 4000 near-miss incidents reported from 2 academic radiation oncology clinics were analyzed using quality control quantification, and a profile of the most effective quality control measures (metrics) was identified.There is a critical need to identify a QA metric to help the busy clinical physicists to focus their limited time and resources most effectively in order to minimize or eliminate errors in the radiation treatment delivery processes. In this symposium the usefulness of workflows and QA metrics to assure safe and high quality patient care will be explored.Two presentations will be given:Quality Metrics and Risk Management with High Risk Radiation Oncology ProceduresStrategies and metrics for quality management in the TG-100 Era Learning Objectives: Provide an overview and the need for QA usability metrics: Different cultures/practices affecting the effectiveness of methods and metrics. Show examples of quality assurance workflows, Statistical process control, that monitor the treatment planning and delivery process to identify errors. To learn to identify and prioritize risks and QA procedures in radiation oncology. Try to answer the question: Can a quality assurance program aided by quality assurance metrics help minimize errors and ensure safe treatment delivery. Should such metrics be institution specific.« less

  4. Hyperspectral imaging of water quality - past applications and future directions.

    NASA Astrophysics Data System (ADS)

    Ross, M. R. V.; Pavelsky, T.

    2017-12-01

    Inland waters control the delivery of sediment, carbon, and nutrients from land to ocean by transforming, depositing, and transporting constituents downstream. However, the dominant in situ conditions that control these processes are poorly constrained, especially at larger spatial scales. Hyperspectral imaging, a remote sensing technique that uses reflectance in hundreds of narrow spectral bands, can be used to estimate water quality parameters like sediment and carbon concentration over larger water bodies. Here, we review methods and applications for using hyperspectral imagery to generate near-surface two-dimensional models of water quality in lakes and rivers. Further, we show applications using newly available data from the National Ecological Observation Network aerial observation platform in the Black Warrior and Tombigbee Rivers, Alabama. We demonstrate large spatial variation in chlorophyll, colored dissolved organic matter, and turbidity in each river and uneven mixing of water quality constituents for several kilometers. Finally, we demonstrate some novel techniques using hyperspectral imagery to deconvolve dissolved organic matter spectral signatures to specific organic matter components.

  5. Use of a small molecule cell cycle inhibitor to control cell growth and improve specific productivity and product quality of recombinant proteins in CHO cell cultures.

    PubMed

    Du, Zhimei; Treiber, David; McCarter, John D; Fomina-Yadlin, Dina; Saleem, Ramsey A; McCoy, Rebecca E; Zhang, Yuling; Tharmalingam, Tharmala; Leith, Matthew; Follstad, Brian D; Dell, Brad; Grisim, Brent; Zupke, Craig; Heath, Carole; Morris, Arvia E; Reddy, Pranhitha

    2015-01-01

    The continued need to improve therapeutic recombinant protein productivity has led to ongoing assessment of appropriate strategies in the biopharmaceutical industry to establish robust processes with optimized critical variables, that is, viable cell density (VCD) and specific productivity (product per cell, qP). Even though high VCD is a positive factor for titer, uncontrolled proliferation beyond a certain cell mass is also undesirable. To enable efficient process development to achieve consistent and predictable growth arrest while maintaining VCD, as well as improving qP, without negative impacts on product quality from clone to clone, we identified an approach that directly targets the cell cycle G1-checkpoint by selectively inhibiting the function of cyclin dependent kinases (CDK) 4/6 with a small molecule compound. Results from studies on multiple recombinant Chinese hamster ovary (CHO) cell lines demonstrate that the selective inhibitor can mediate a complete and sustained G0/G1 arrest without impacting G2/M phase. Cell proliferation is consistently and rapidly controlled in all recombinant cell lines at one concentration of this inhibitor throughout the production processes with specific productivities increased up to 110 pg/cell/day. Additionally, the product quality attributes of the mAb, with regard to high molecular weight (HMW) and glycan profile, are not negatively impacted. In fact, high mannose is decreased after treatment, which is in contrast to other established growth control methods such as reducing culture temperature. Microarray analysis showed major differences in expression of regulatory genes of the glycosylation and cell cycle signaling pathways between these different growth control methods. Overall, our observations showed that cell cycle arrest by directly targeting CDK4/6 using selective inhibitor compound can be utilized consistently and rapidly to optimize process parameters, such as cell growth, qP, and glycosylation profile in recombinant antibody production cultures. © 2014 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals, Inc.

  6. 46 CFR 160.001-5 - Production oversight.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Life Preservers, General § 160.001-5 Production oversight. (a... additional production tests and inspections necessary to maintain quality control and to monitor compliance..., each manufacturer of a life preserver and each laboratory inspector shall comply with the following, as...

  7. 46 CFR 160.001-5 - Production oversight.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Life Preservers, General § 160.001-5 Production oversight. (a... additional production tests and inspections necessary to maintain quality control and to monitor compliance..., each manufacturer of a life preserver and each laboratory inspector shall comply with the following, as...

  8. 46 CFR 160.001-5 - Production oversight.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Life Preservers, General § 160.001-5 Production oversight. (a... additional production tests and inspections necessary to maintain quality control and to monitor compliance..., each manufacturer of a life preserver and each laboratory inspector shall comply with the following, as...

  9. 46 CFR 160.001-5 - Production oversight.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Life Preservers, General § 160.001-5 Production oversight. (a... additional production tests and inspections necessary to maintain quality control and to monitor compliance..., each manufacturer of a life preserver and each laboratory inspector shall comply with the following, as...

  10. 46 CFR 160.001-5 - Production oversight.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Life Preservers, General § 160.001-5 Production oversight. (a... additional production tests and inspections necessary to maintain quality control and to monitor compliance..., each manufacturer of a life preserver and each laboratory inspector shall comply with the following, as...

  11. Culture-general and -specific associations of attachment avoidance and anxiety with perceived parental warmth and psychological control among Turk and Belgian adolescents.

    PubMed

    Güngör, Derya; Bornstein, Marc H

    2010-10-01

    Both the adolescent peer attachment and perceived parenting style literatures emphasize the role of the quality of the parent-child relationship in children's healthy adjustment beyond the family, but few studies have investigated links between adolescents' peer attachment and perceptions of parenting. We investigate relations of adolescents' perceptions of warmth and psychological control from parents with avoidance and anxiety in attachment to close friends in two contrasting cultures. Altogether, 262 Turk and 263 Belgian youth between 14 and 18 years of age participated. Cross-culturally, attachment avoidance was negatively related to maternal warmth, and attachment anxiety positively related to maternal and paternal control and negatively to paternal warmth. Beyond these general relations, attachment avoidance was associated with paternal psychological control in Belgians but not in Turks. The study provides cross-cultural evidence for specific relations between peer attachment and perceived parenting and suggests a culture-specific pathway for the development of attachment avoidance.

  12. Model of epidemic control based on quarantine and message delivery

    NASA Astrophysics Data System (ADS)

    Wang, Xingyuan; Zhao, Tianfang; Qin, Xiaomeng

    2016-09-01

    The model provides two novel strategies for the preventive control of epidemic diseases. One approach is related to the different isolating rates in latent period and invasion period. Experiments show that the increasing of isolating rates in invasion period, as long as over 0.5, contributes little to the preventing of epidemic; the improvement of isolation rate in latent period is key to control the disease spreading. Another is a specific mechanism of message delivering and forwarding. Information quality and information accumulating process are also considered there. Macroscopically, diseases are easy to control as long as the immune messages reach a certain quality. Individually, the accumulating messages bring people with certain immunity to the disease. Also, the model is performed on the classic complex networks like scale-free network and small-world network, and location-based social networks. Results show that the proposed measures demonstrate superior performance and significantly reduce the negative impact of epidemic disease.

  13. Exercise and Parkinson's: benefits for cognition and quality of life.

    PubMed

    Cruise, K E; Bucks, R S; Loftus, A M; Newton, R U; Pegoraro, R; Thomas, M G

    2011-01-01

    The benefits of physical exercise for psychological aspects of quality of life (QoL) are well established in normally ageing adults, yet potential benefits for people with Parkinson's disease (PD) have received limited attention. This study evaluated the benefits of exercise for cognitive functioning, mood and disease-specific QoL for people with PD. Twenty-eight individuals with PD were allocated to an exercise intervention program (EIP, n = 15) or control group (n = 13). The EIP group undertook a programme of progressive anabolic and aerobic exercise twice weekly for 12 weeks. The control group maintained their usual lifestyle. Exercise was shown to have selective benefits for cognitive functioning by improving frontal lobe based executive function. No significant effects were demonstrated for mood or disease-specific QoL. These results are consistent with previous research demonstrating selective benefits of exercise for executive function among normal ageing adults and PD. Copyright © 2010 The Authors. Journal compilation © 2010 Blackwell Munksgaard.

  14. CHIP protects against cardiac pressure overload through regulation of AMPK

    PubMed Central

    Schisler, Jonathan C.; Rubel, Carrie E.; Zhang, Chunlian; Lockyer, Pamela; Cyr, Douglas M.; Patterson, Cam

    2013-01-01

    Protein quality control and metabolic homeostasis are integral to maintaining cardiac function during stress; however, little is known about if or how these systems interact. Here we demonstrate that C terminus of HSC70-interacting protein (CHIP), a regulator of protein quality control, influences the metabolic response to pressure overload by direct regulation of the catalytic α subunit of AMPK. Induction of cardiac pressure overload in Chip–/– mice resulted in robust hypertrophy and decreased cardiac function and energy generation stemming from a failure to activate AMPK. Mechanistically, CHIP promoted LKB1-mediated phosphorylation of AMPK, increased the specific activity of AMPK, and was necessary and sufficient for stress-dependent activation of AMPK. CHIP-dependent effects on AMPK activity were accompanied by conformational changes specific to the α subunit, both in vitro and in vivo, identifying AMPK as the first physiological substrate for CHIP chaperone activity and establishing a link between cardiac proteolytic and metabolic pathways. PMID:23863712

  15. A Randomized Trial to Improve Communication About End-of-Life Care Among Patients With COPD

    PubMed Central

    Udris, Edmunds M.; Engelberg, Ruth A.; Diehr, Paula H.; Bryson, Christopher L.; Reinke, Lynn F.; Curtis, J. Randall

    2012-01-01

    Objective: Patients with COPD consistently express a desire to discuss end-of-life care with clinicians, but these discussions rarely occur. We assessed whether an intervention using patient-specific feedback about preferences for discussing end-of-life care would improve the occurrence and quality of communication between patients with COPD and their clinicians. Methods: We performed a cluster-randomized trial of clinicians and patients from the outpatient clinics at the Veterans Affairs Puget Sound Health Care System. Using self-reported questionnaires, we assessed patients’ preferences for communication, life-sustaining therapy, and experiences at the end of life. The intervention clinicians and patients received a one-page patient-specific feedback form, based on questionnaire responses, to stimulate conversations. The control group completed questionnaires but did not receive feedback. Patient-reported occurrence and quality of end-of-life communication (QOC) were assessed within 2 weeks of a targeted visit. Intention-to-treat regression analyses were performed with generalized estimating equations to account for clustering of patients within clinicians. Results: Ninety-two clinicians contributed 376 patients. Patients in the intervention arm reported nearly a threefold higher rate of discussions about end-of-life care (unadjusted, 30% vs 11%; P < .001). Baseline end-of-life communication was poor (intervention group QOC score, 23.3; 95% CI, 19.9-26.8; control QOC score, 19.2; 95% CI, 15.9-22.4). Patients in the intervention arm reported higher-quality end-of-life communication that was statistically significant, although the overall improvement was small (Cohen effect size, 0.21). Conclusions: A one-page patient-specific feedback form about preferences for end-of-life care and communication improved the occurrence and quality of communication from patients’ perspectives. Trial registry: ClinicalTrials.gov; No.: NCT00106080; URL: www.clinicaltrials.gov PMID:21940765

  16. Quality of life, self-esteem and worries in young adult survivors of childhood cancer.

    PubMed

    Langeveld, N E; Grootenhuis, M A; Voûte, P A; de Haan, R J; van den Bos, C

    2004-12-01

    This study assessed quality of life, self-esteem and worries in young adult survivors of childhood cancer compared to a group of young adults with no history of cancer. The impact of demographic, medical and treatment factors and self-esteem on survivors' quality of life and worries was studied. Participants were 400 long-term survivors (LTS) of childhood cancer (age range 16-49 years, 45% female) who had completed treatment an average of 16 years previously and 560 persons (age range 16-53 years, 55% female) with no history of cancer. All participants completed the MOS-24 (Medical Outcome Study Scale), a Worry questionnaire consisting of three scales (cancer-specific concerns, general health concerns, present and future concerns), and the Rosenberg Self-Esteem Scale. Small to moderate differences were found in mean MOS-24 scores between the LTS group and controls (range effect sizes -0.36-0.22). No significant difference was found in the mean self-esteem scores between LTS and controls. Female LTS had more cancer-specific concerns than male LTS. In several related areas of general health, self-image and dying, the LTS group reported less worries than controls, but LTS worried significantly more about their fertility, getting/changing a job and obtaining insurance's. Multiple linear regression analysis revealed that female gender, unemployment, severe late effects/health problems and a low self-esteem were predictors of worse quality of life in survivors. In addition, age at follow-up, unemployment, years since completion of therapy and a low self-esteem were associated with a higher degree of survivors' worries. Quality of life and the level of self-esteem in LTS of childhood cancer is not different from their peers. Although many LTS worried not more or even less about health issues than their peers, they often are concerned about some present and future concerns. The investigated factors could explain poor quality of life and worries only to a limited extent. Further research exploring determinants and indices of quality of life and worries in LTS is warranted.

  17. Tamarix as habitat for birds: Implications for riparian restoration in the Southwestern United States

    USGS Publications Warehouse

    Sogge, M.K.; Sferra, S.J.; Paxton, E.H.

    2008-01-01

    Exotic vegetation has become a major habitat component in many ecosystems around the world, sometimes dramatically changing the vegetation community structure and composition. In the southwestern United States, riparian ecosystems are undergoing major changes in part due to the establishment and spread of the exotic Tamarix (saltcedar, tamarisk). There are concerns about the suitability of Tamarix as habitat for birds. Although Tamarix habitats tend to support fewer species and individuals than native habitats, Arizona Breeding Bird Atlas data and Birds of North America accounts show that 49 species use Tamarix as breeding habitat. Importantly, the relative use of Tamarix and its quality as habitat vary substantially by geographic location and bird species. Few studies have examined how breeding in Tamarix actually affects bird survivorship and productivity; recent research on Southwestern Willow Flycatchers has found no negative effects from breeding in Tamarix habitats. Therefore, the ecological benefits and costs of Tamarix control are difficult to predict and are likely to be species specific and site specific. Given the likelihood that high-quality native riparian vegetation will not develop at all Tamarix control sites, restoration projects that remove Tamarix but do not assure replacement by high-quality native habitat have the potential to reduce the net riparian habitat value for some local or regional bird populations. Therefore, an assessment of potential negative impacts is important in deciding if exotic control should be conducted. In addition, measurable project objectives, appropriate control and restoration techniques, and robust monitoring are all critical to effective restoration planning and execution. ?? 2008 Society for Ecological Restoration International.

  18. Preparation of red blood cell concentrates and plasma units from whole blood held overnight using a hollow-fibre separation system.

    PubMed

    Johnson, L; Kwok, M; Marks, D C

    2015-02-01

    The ErySep system represents an alternative to centrifuge-based whole blood (WB) separation, using gravity and filtration through hollow-fibres (0·2 µm pore size) to produce red blood cell (RBC) and plasma components. The aim of this study was to characterise the quality of ErySep RBC and plasma units compared with standard products from WB held overnight. Two ABO-compatible WB units (n = 24) were pooled and split to produce matched products. One of the WB units was separated into components using the ErySep system (ErySep; n = 12), whereas the other units were separated by centrifugation (control; n = 12). RBC units were stored at 2-6 °C and assessed for in vitro quality over 42 days of storage. Plasma was frozen at -30 °C and tested upon thawing. Processing WB with the ErySep system took longer than controls. The ErySep RBC units were of an appropriate volume (307 ± 17 mL) and contained sufficient Hb (50 ± 2 g unit(-1) ). ErySep RBC components contained more microparticles relative to controls at expiry. The plasma volume, total protein, coagulation factor activity (fibrinogen, FV, FVIII) and number of microparticles was lower in the ErySep units compared with controls. Following overnight hold of WB, the ErySep system was capable of producing RBC components that met specifications. However, the ErySep plasma components did not meet quality specifications. © 2015 British Blood Transfusion Society.

  19. The impact of primary open-angle glaucoma: Quality of life in Indian patients.

    PubMed

    Kumar, Suresh; Ichhpujani, Parul; Singh, Roopali; Thakur, Sahil; Sharma, Madhu; Nagpal, Nimisha

    2018-03-01

    Glaucoma significantly affects the quality of life (QoL) of a patient. Despite the huge number of glaucoma patients in India, not many, QoL studies have been carried out. The purpose of the present study was to evaluate the QoL in Indian patients with varying severity of glaucoma. This was a hospital-based, cross-sectional, analytical study of 180 patients. The QoL was assessed using orally administered QoL instruments comprising of two glaucoma-specific instruments; Glaucoma Quality of Life-15 (GQL-15) and Viswanathan 10 instrument, and 1 vision-specific instrument; National Eye Institute Visual Function Questionnaire-25 (NEIVFQ25). Using NEIVFQ25, the difference between mean QoL scores among cases (88.34 ± 4.53) and controls (95.32 ± 5.76) was statistically significant. In GQL-15, there was a statistically significant difference between mean scores of cases (22.58 ± 5.23) and controls (16.52 ± 1.24). The difference in mean scores with Viswanathan 10 instrument in cases (7.92 ± 0.54) and controls (9.475 ± 0.505) was also statistically significant. QoL scores also showed moderate correlation with mean deviation, pattern standard deviation, and vertical cup-disc ratio. In our study, all the three instruments showed decrease in QoL in glaucoma patients compared to controls. With the increase in severity of glaucoma, corresponding decrease in QoL was observed. It is important for ophthalmologists to understand about the QoL in glaucoma patients so as to have a more holistic approach to patients and for effective delivery of treatment.

  20. Measurement of IgE antibodies using liquid allergens--an inter-method and inter-laboratory quality assessment.

    PubMed

    Aberer, Werner; Kränke, Birger

    2002-11-30

    The determination of IgE antibodies is important for the in vitro diagnosis of allergic diseases. However, not all systems currently available in the market fulfill essential quality criteria, e.g. regarding characteristics such as sensitivity and specificity, and the data do not always reflect true clinical relevance in the required fashion. Recent innovations may reduce the workload for the technician, and thus help save time and money. More importantly, they might reduce potential sources of error. Two allergy systems, the well established Pharmacia CAP system that uses the allergens conventionally in a solid phase and the ALLERgen system that employs liquid allergens, were compared with regard to quality criteria and practicability. Defined serum pools were checked for within-run and between-days imprecision of IgE antibody detection in two independent laboratories. Serum specimens from allergic patients and controls were tested in parallel using both methods for total and antigen-specific IgE antibody detection under standardized conditions. In addition, one laboratory working exclusively with the ALLERgen system participated in the Austrian inter-laboratory quality assessment program. The two systems were comparable in terms of sensitivity and specificity, and also showed good correlation. Within-run evaluations were excellent for total IgE and antigen-specific IgE, and the between-days imprecision was satisfactory. Coefficients of variation were within an acceptable range for the different groups of allergens. In the external quality control program the data obtained with the ALLERgen system showed good concordance with other systems in use; up to 94% of the results were identical when considering clinically relevant sensitizations. Regarding practicability, both systems were most satisfactory for the operator. The ALLERgen system offered a certain advantage in terms of automated operation, which resulted in shorter fixed and variable phases of personnel time. Both the Pharmacia CAP system and the ALLERgen system belong to an advanced generation of allergy test systems and are easy to handle. The reproducibility of results is good with both methods, and the imprecision data fall within an acceptable range. Thus, the ALLERgen system is a reliable in vitro system for evaluating specific and total IgE in serum, providing data equivalent to those obtained with the CAP system.

  1. Qualification of a Quantitative Method for Monitoring Aspartate Isomerization of a Monoclonal Antibody by Focused Peptide Mapping.

    PubMed

    Cao, Mingyan; Mo, Wenjun David; Shannon, Anthony; Wei, Ziping; Washabaugh, Michael; Cash, Patricia

    Aspartate (Asp) isomerization is a common post-translational modification of recombinant therapeutic proteins that can occur during manufacturing, storage, or administration. Asp isomerization in the complementarity-determining regions of a monoclonal antibody may affect the target binding and thus a sufficiently robust quality control method for routine monitoring is desirable. In this work, we utilized a liquid chromatography-mass spectrometry (LC/MS)-based approach to identify the Asp isomerization in the complementarity-determining regions of a therapeutic monoclonal antibody. To quantitate the site-specific Asp isomerization of the monoclonal antibody, a UV detection-based quantitation assay utilizing the same LC platform was developed. The assay was qualified and implemented for routine monitoring of this product-specific modification. Compared with existing methods, this analytical paradigm is applicable to identify Asp isomerization (or other modifications) and subsequently develop a rapid, sufficiently robust quality control method for routine site-specific monitoring and quantitation to ensure product quality. This approach first identifies and locates a product-related impurity (a critical quality attribute) caused by isomerization, deamidation, oxidation, or other post-translational modifications, and then utilizes synthetic peptides and MS to assist the development of a LC-UV-based chromatographic method that separates and quantifies the product-related impurities by UV peaks. The established LC-UV method has acceptable peak specificity, precision, linearity, and accuracy; it can be validated and used in a good manufacturing practice environment for lot release and stability testing. Aspartate isomerization is a common post-translational modification of recombinant proteins during manufacture process and storage. Isomerization in the complementarity-determining regions (CDRs) of a monoclonal antibody A (mAb-A) has been detected and has been shown to have impact on the binding affinity to the antigen. In this work, we utilized a mass spectrometry-based peptide mapping approach to detect and quantitate the Asp isomerization in the CDRs of mAb-A. To routinely monitor the CDR isomerization of mAb-A, a focused peptide mapping method utilizing reversed phase chromatographic separation and UV detection has been developed and qualified. This approach is generally applicable to monitor isomerization and other post-translational modifications of proteins in a specific and high-throughput mode to ensure product quality. © PDA, Inc. 2016.

  2. Minutes: Accredited Standards Committee on Acoustics, S1 U.S. Tag for ISO/TC43 Acoustics and IEC/TC29 Electroacoustics

    DTIC Science & Technology

    1991-05-02

    international arena with respect to noise control technology and noise environmental quality In order to give you soma background into the work of the...14 a) A new working groug _S1/WG2Q Ground Impedance................ 14 b) Air Movement and Control Association. Inc. (AMCA...the Air Movement and Control Association (AMCA) on their inquiries concerning ANSI S1.11-1986 Specification for octave-band and fractional-octave-band

  3. DNA authentication of animal-derived concentrated Chinese medicine granules.

    PubMed

    Jiang, Li-Li; Lo, Yat-Tung; Chen, Wei-Ting; Shaw, Pang-Chui

    2016-09-10

    Concentrated Chinese medicine granules (CCMG) offer patients a convenient option for traditional therapy. However with morphological and microscopic characteristics lost, it is difficult to authenticate and control the quality of these medicinal products. This study is the first to examine the feasibility of using DNA techniques to authenticate animal-derived CCMG, which has so far lacking of effective means for authentication. Primers targeting amplicons of different sizes were designed to determine the presence of PCR-amplifiable DNA fragments in two types of CCMG, namely Zaocys and Scorpio. Species-specific primers were designed to differentiate the genuine drugs from their adulterants. The specificity of the designed primers was evaluated in crude drugs (including genuine and adulterant) and CCMG. Results showed that by using species-specific primers, DNA fragments of less than 200bp could be isolated from the CCMG and the concerned source materials. This study demonstrated the presence of small size DNA in animal-derived CCMG and the DNA is effective in species identification. The work has extended the application of DNA techniques in herbal medicine and this approach may be further developed for quality control and regulatory compliance in the CCMG industry. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Autobiographical memory in Parkinson's disease: a retrieval deficit.

    PubMed

    Souchay, Celine; Smith, Sarah Jane

    2013-09-01

    This study examined the effects of providing cues to facilitate autobiographical memory retrieval in Parkinson's disease. Previous findings have shown that individuals with Parkinson's disease retrieve fewer specific autobiographical memories than older adult controls. These findings are clinically significant since the quality of autobiographical memory is linked to identity and sense of self. In the current study, 16 older adults with Parkinson's disease without dementia and 16 matched older adult controls were given 3 min in which to recall autobiographical memories associated with five different time periods and to give each memory a short title. Participants were later asked to retrieve the memories in three phases: firstly in a free recall phase; secondly in response to general cues (time periods) and finally in response to specific cues (the short titles previously given). The number of memories and the quality of the memory (general or specific) was recorded in each condition. Compared with matched older adult controls, the Parkinson's disease group was impaired in retrieving the memories that they had previously given in the free recall phase and in response to general cues. The performance of the group with Parkinson's disease was only equivalent to the older adults when they retrieved memories in response to self-generated cues. The findings are discussed in relation to theories of autobiographical memory and the neuropsychology of Parkinson's disease. © 2013 The British Psychological Society.

  5. Microbial ecology and quality assurance in food fermentation systems. The case of kefir grains application.

    PubMed

    Plessas, S; Alexopoulos, A; Voidarou, C; Stavropoulou, E; Bezirtzoglou, E

    2011-12-01

    Fermentation technology has become a modern method for food production the last decades as a process for enhancing product stability, safety and sensory standards. The main reason for this development is the increasing consumers' demand for safe and high quality food products. The above has led the scientific community to the thorough study for the appropriate selection of specific microorganisms with desirable properties such as bacteriocin production, and probiotic properties. The main food products produced through fermentation activity are bread, wine, beer cheese and other dairy products. The microorganisms conducting the above processes are mainly yeasts and lactic acid bacteria. The end products of carbohydrate catabolism by these microorganisms contribute not only to preservation as it was believed years ago, but also to the flavour, aroma and texture and to the increase of the nutritional quality by thereby helping determine unique product characteristics. Thus, controlling the function of specific microorganisms or the succession of microorganisms that dominate the microflora is therefore advantageous, because it can increase product quality, functionality and value. Throughout the process of the discovery of microbiological diversity in various fermented food systems, the development of starter culture technology has gained more scientific attention, and it could be used for the control of the manufacturing operation, and management of product quality. In the frame of this review the presentation of the quality enhancement of most consumed fermented food products around the world is attempted and the new trends in production of fermented food products, such as bread is discussed. The review is focused in kefir grains application in bread production. Copyright © 2011 Elsevier Ltd. All rights reserved.

  6. Water Deficit and Salinity Stress Reveal Many Specific QTL for Plant Growth and Fruit Quality Traits in Tomato

    PubMed Central

    Diouf, Isidore A.; Derivot, Laurent; Bitton, Frédérique; Pascual, Laura; Causse, Mathilde

    2018-01-01

    Quality is a key trait in plant breeding, especially for fruit and vegetables. Quality involves several polygenic components, often influenced by environmental conditions with variable levels of genotype × environment interaction that must be considered in breeding strategies aiming to improve quality. In order to assess the impact of water deficit and salinity on tomato fruit quality, we evaluated a multi-parent advanced generation intercross (MAGIC) tomato population in contrasted environmental conditions over 2 years, one year in control vs. drought condition and the other in control vs. salt condition. Overall 250 individual lines from the MAGIC population—derived from eight parental lines covering a large diversity in cultivated tomato—were used to identify QTL in both experiments for fruit quality and yield component traits (fruit weight, number of fruit, Soluble Solid Content, firmness), phenology traits (time to flower and ripe) and a vegetative trait, leaf length. All the traits showed a large genotype variation (33–86% of total phenotypic variation) in both experiments and high heritability whatever the year or treatment. Significant genotype × treatment interactions were detected for five of the seven traits over the 2 years of experiments. QTL were mapped using 1,345 SNP markers. A total of 54 QTL were found among which 15 revealed genotype × environment interactions and 65% (35 QTL) were treatment specific. Confidence intervals of the QTL were projected on the genome physical map and allowed identifying regions carrying QTL co-localizations, suggesting pleiotropic regulation. We then applied a strategy for candidate gene detection based on the high resolution mapping offered by the MAGIC population, the allelic effect of each parental line at the QTL and the sequence information of the eight parental lines. PMID:29559986

  7. Improving Reliability of Spectrum Analysis for Software Quality Requirements Using TCM

    NASA Astrophysics Data System (ADS)

    Kaiya, Haruhiko; Tanigawa, Masaaki; Suzuki, Shunichi; Sato, Tomonori; Osada, Akira; Kaijiri, Kenji

    Quality requirements are scattered over a requirements specification, thus it is hard to measure and trace such quality requirements to validate the specification against stakeholders' needs. We proposed a technique called “spectrum analysis for quality requirements” which enabled analysts to sort a requirements specification to measure and track quality requirements in the specification. In the same way as a spectrum in optics, a quality spectrum of a specification shows a quantitative feature of the specification with respect to quality. Therefore, we can compare a specification of a system to another one with respect to quality. As a result, we can validate such a specification because we can check whether the specification has common quality features and know its specific features against specifications of existing similar systems. However, our first spectrum analysis for quality requirements required a lot of effort and knowledge of a problem domain and it was hard to reuse such knowledge to reduce the effort. We thus introduce domain knowledge called term-characteristic map (TCM) to reuse the knowledge for our quality spectrum analysis. Through several experiments, we evaluate our spectrum analysis, and main finding are as follows. First, we confirmed specifications of similar systems have similar quality spectra. Second, results of spectrum analysis using TCM are objective, i.e., different analysts can generate almost the same spectra when they analyze the same specification.

  8. Features of Computer-Based Decision Aids: Systematic Review, Thematic Synthesis, and Meta-Analyses

    PubMed Central

    Krömker, Dörthe; Meguerditchian, Ari N; Tamblyn, Robyn

    2016-01-01

    Background Patient information and education, such as decision aids, are gradually moving toward online, computer-based environments. Considerable research has been conducted to guide content and presentation of decision aids. However, given the relatively new shift to computer-based support, little attention has been given to how multimedia and interactivity can improve upon paper-based decision aids. Objective The first objective of this review was to summarize published literature into a proposed classification of features that have been integrated into computer-based decision aids. Building on this classification, the second objective was to assess whether integration of specific features was associated with higher-quality decision making. Methods Relevant studies were located by searching MEDLINE, Embase, CINAHL, and CENTRAL databases. The review identified studies that evaluated computer-based decision aids for adults faced with preference-sensitive medical decisions and reported quality of decision-making outcomes. A thematic synthesis was conducted to develop the classification of features. Subsequently, meta-analyses were conducted based on standardized mean differences (SMD) from randomized controlled trials (RCTs) that reported knowledge or decisional conflict. Further subgroup analyses compared pooled SMDs for decision aids that incorporated a specific feature to other computer-based decision aids that did not incorporate the feature, to assess whether specific features improved quality of decision making. Results Of 3541 unique publications, 58 studies met the target criteria and were included in the thematic synthesis. The synthesis identified six features: content control, tailoring, patient narratives, explicit values clarification, feedback, and social support. A subset of 26 RCTs from the thematic synthesis was used to conduct the meta-analyses. As expected, computer-based decision aids performed better than usual care or alternative aids; however, some features performed better than others. Integration of content control improved quality of decision making (SMD 0.59 vs 0.23 for knowledge; SMD 0.39 vs 0.29 for decisional conflict). In contrast, tailoring reduced quality of decision making (SMD 0.40 vs 0.71 for knowledge; SMD 0.25 vs 0.52 for decisional conflict). Similarly, patient narratives also reduced quality of decision making (SMD 0.43 vs 0.65 for knowledge; SMD 0.17 vs 0.46 for decisional conflict). Results were varied for different types of explicit values clarification, feedback, and social support. Conclusions Integration of media rich or interactive features into computer-based decision aids can improve quality of preference-sensitive decision making. However, this is an emerging field with limited evidence to guide use. The systematic review and thematic synthesis identified features that have been integrated into available computer-based decision aids, in an effort to facilitate reporting of these features and to promote integration of such features into decision aids. The meta-analyses and associated subgroup analyses provide preliminary evidence to support integration of specific features into future decision aids. Further research can focus on clarifying independent contributions of specific features through experimental designs and refining the designs of features to improve effectiveness. PMID:26813512

  9. The use of a non-nuclear density gauge for monitoring the compaction process of asphalt pavement

    NASA Astrophysics Data System (ADS)

    Van den bergh, Wim; Vuye, Cedric; Kara, Patricia; Couscheir, Karolien; Blom, Johan; Van Bouwel, Philippe

    2017-09-01

    The mechanical performance of an asphalt pavement affects its durability - thus carbon footprint. Many parameters contribute to the success of a durable asphalt mix, e.g. material selection, an accurate mix and even the road design in which the asphalt mix quality is quantified. The quality of the asphalt mix, by its mechanical properties, is also related to the compaction degree. However, and specifically for high volume rates, the laying process at the construction site needs an effective method to monitor and adjust immediately the compaction quality before cooling and without damaging the layer, which is now absent. In this paper the use of a non-nuclear density gauge (PQI - Pavement Quality Indicator) is evaluated, based on a site at Brussels Airport. Considering the outcome of the present research, this PQI is advised as a unique tool for continuous density measurements and allow immediate adjustments during compaction, and decreases the number of core drilling for quality control, and as a posteriori asphalt pavement density test where cores are prohibited. The use of PQI could be recommended to be a part of the standard quality control process in the Flemish region.

  10. Cost-effectiveness of early interventions for non-specific low back pain: a randomized controlled study investigating medical yoga, exercise therapy and self-care advice.

    PubMed

    Aboagye, Emmanuel; Karlsson, Malin Lohela; Hagberg, Jan; Jensen, Irene

    2015-02-01

    To evaluate the cost-effectiveness of medical yoga as an early intervention compared with evidence-based exercise therapy and self-care advice for non-specific low back pain. Randomized controlled trial with a cost-effectiveness analysis. A total of 159 participants randomized into the medical yoga group (n = 52), the exercise therapy group (n = 52) and the self-care advice group (n = 55). The health outcome measure EQ-5D was applied to measure quality of life data combined with cost data collected from treatment groups from baseline to 12 months follow-up. Outcome measure was health-related quality of life (HRQL). Incremental cost per quality adjusted life year (QALY) was also calculated. Cost-effectiveness analysis was conducted primarily from the societal and employer perspectives. Medical yoga is cost-effective compared with self-care advice if an employer considers the significant improvement in the HRQL of an employee with low back pain justifies the additional cost of treatment (i.e. in this study EUR 150). From a societal perspective, medical yoga is a cost-effective treatment compared with exercise therapy and self-care advice if an additional QALY is worth EUR 11,500. Sensitivity analysis suggests that medical yoga is more cost-effective than its alternatives. Six weeks of uninterrupted medical yoga thera-py is a cost-effective early intervention for non-specific low back pain, when treatment recommendations are adhered to.

  11. Meta-analysis: audit and feedback features impact effectiveness on care quality.

    PubMed

    Hysong, Sylvia J

    2009-03-01

    Audit and feedback (A&F) has long been used to improve quality of care, albeit with variable results. This meta-analytic study tested whether Feedback Intervention Theory, a framework from industrial/organizational psychology, explains the observed variability in health care A&F research. studies cited by Jamtvedt's 2006 Cochrane systematic review of A&F, followed by database searches using the Cochrane review's search strategy to identify more recent studies. Cochrane review criteria, plus: presence of a treatment group receiving only A & F; a control group receiving no intervention; a quantitatively measurable outcome; minimum n of 10 per arm; sufficient statistics for effect size calculations. Moderators: presence of discouragement and praise; correct solution, attainment level, velocity, frequency, and normative information; feedback format (verbal, textual, graphic, public, computerized, group vs. individual); goal setting activity. meta-analytic procedures using the Hedges-Olkin method. Of 519 studies initially identified, 19 met all inclusion criteria. Studies were most often excluded due to the lack of a feedback-only arm. A&F has a modest, though significant positive effect on quality outcomes (d = 0.40, 95% confidence interval = +/-0.20); providing specific suggestions for improvement, written, and more frequent feedback strengthened this effect, whereas graphical and verbal feedback attenuated this effect. A&F effectiveness is improved when feedback is delivered with specific suggestions for improvement, in writing, and frequently. Other feedback characteristics could also potentially improve effectiveness; however, research with stricter experimental controls is needed to identify the specific feedback characteristics that maximize its effectiveness.

  12. The frequencies of IFNγ+IL2+TNFα+ PPD-specific CD4+CD45RO+ T-cells correlate with the magnitude of the QuantiFERON® gold in-tube response in a prospective study of healthy indian adolescents.

    PubMed

    Jenum, Synne; Grewal, Harleen M S; Hokey, David A; Kenneth, John; Vaz, Mario; Doherty, Timothy Mark; Jahnsen, Frode Lars

    2014-01-01

    QuantiFERON-TB Gold In-Tube (QFT) is an IFNγ-release assay used in the diagnosis of Mycobacterium tuberculosis (MTB) infection. The risk of TB progression increases with the magnitude of the MTB-specific IFNγ-response. QFT reversion, also associated with low Tuberculin Skin Test responses, may therefore represent a transient immune response with control of M. tuberculosis infection. However, studies at the single cell level have suggested that the quality (polyfunctionality) of the T-cell response is more important than the quantity of cytokines produced. To explore the quality and/or magnitude of mycobacteria-specific T-cell responses associated with QFT reversion and persistent QFT-positivity. Multi-color flowcytometry on prospectively collected peripheral blood mononuclear cells was applied to assess mycobacteria-specific T-cell responses in 42 QFT positive Indian adolescents of whom 21 became QFT negative (reverters) within one year. Ten QFT consistent negatives were also included as controls. There was no difference in the qualitative PPD-specific CD4+ T-cell response between QFT consistent positives and reverters. However, compared with QFT consistent positives, reverters displayed lower absolute frequencies of polyfunctional (IFNγ+IL2+TNFα+) CD4+ T-cells at baseline, which were further reduced to the point where they were not different to QFT negative controls one year later. Moreover, absolute frequencies of these cells correlated well with the magnitude of the QFT-response. Whereas specific polyfunctional CD4+ T-cells have been suggested to protect against TB progression, our data do not support that higher relative or absolute frequencies of PPD-specific polyfunctional CD4+ T-cells in peripheral blood can explain the reduced risk of TB progression observed in QFT reverters. On the contrary, absolute frequencies of these cells correlated with the QFT-response, suggesting that this readout reflects antigenic load.

  13. SU-D-BRC-02: Application of Six Sigma Approach to Improve the Efficiency of Patient-Specific QA in Proton Therapy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    LAH, J; Shin, D; Manger, R

    Purpose: To show how the Six Sigma DMAIC (Define-Measure-Analyze-Improve-Control) can be used for improving and optimizing the efficiency of patient-specific QA process by designing site-specific range tolerances. Methods: The Six Sigma tools (process flow diagram, cause and effect, capability analysis, Pareto chart, and control chart) were utilized to determine the steps that need focus for improving the patient-specific QA process. The patient-specific range QA plans were selected according to 7 treatment site groups, a total of 1437 cases. The process capability index, Cpm was used to guide the tolerance design of patient site-specific range. We also analyzed the financial impactmore » of this project. Results: Our results suggested that the patient range measurements were non-capable at the current tolerance level of ±1 mm in clinical proton plans. The optimized tolerances were calculated for treatment sites. Control charts for the patient QA time were constructed to compare QA time before and after the new tolerances were implemented. It is found that overall processing time was decreased by 24.3% after establishing new site-specific range tolerances. The QA failure for whole process in proton therapy would lead up to a 46% increase in total cost. This result can also predict how costs are affected by changes in adopting the tolerance design. Conclusion: We often believe that the quality and performance of proton therapy can easily be improved by merely tightening some or all of its tolerance requirements. This can become costly, however, and it is not necessarily a guarantee of better performance. The tolerance design is not a task to be undertaken without careful thought. The Six Sigma DMAIC can be used to improve the QA process by setting optimized tolerances. When tolerance design is optimized, the quality is reasonably balanced with time and cost demands.« less

  14. Colorimetry as Quality Control Tool for Individual Inkjet-Printed Pediatric Formulations.

    PubMed

    Wickström, Henrika; Nyman, Johan O; Indola, Mathias; Sundelin, Heidi; Kronberg, Leif; Preis, Maren; Rantanen, Jukka; Sandler, Niklas

    2017-02-01

    Printing technologies were recently introduced to the pharmaceutical field for manufacturing of drug delivery systems. Printing allows on demand manufacturing of flexible pharmaceutical doses in a personalized manner, which is critical for a successful and safe treatment of patient populations with specific needs, such as children and the elderly, and patients facing multimorbidity. Printing of pharmaceuticals as technique generates new demands on the quality control procedures. For example, rapid quality control is needed as the printing can be done on demand and at the point of care. This study evaluated the potential use of a handheld colorimetry device for quality control of printed doses of vitamin Bs on edible rice and sugar substrates. The structural features of the substrates with and without ink were also compared. A multicomponent ink formulation with vitamin B 1 , B 2 , B 3 , and B 6 was developed. Doses (4 cm 2 ) were prepared by applying 1-10 layers of yellow ink onto the white substrates using thermal inkjet technology. The colorimetric method was seen to be viable in detecting doses up to the 5th and 6th printed layers until color saturation of the yellow color parameter (b*) was observed on the substrates. Liquid chromatography mass spectrometry was used as a reference method for the colorimetry measurements plotted against the number of printed layers. It was concluded that colorimetry could be used as a quality control tool for detection of different doses. However, optimization of the color addition needs to be done to avoid color saturation within the planned dose interval.

  15. Effect of different flours on quality of legume cakes to be baked in microwave-infrared combination oven and conventional oven.

    PubMed

    Ozkahraman, Betul Canan; Sumnu, Gulum; Sahin, Serpil

    2016-03-01

    The objective of this study was to compare the quality of legume cakes baked in microwave-infrared combination (MW-IR) oven with conventional oven. Legume cake formulations were developed by replacing 10 % wheat flour by lentil, chickpea and pea flour. As a control, wheat flour containing cakes were used. Weight loss, specific volume, texture, color, gelatinization degree, macro and micro-structure of cakes were investigated. MW-IR baked cakes had higher specific volume, weight loss and crust color change and lower hardness values than conventionally baked cakes. Larger pores were observed in MW-IR baked cakes according to scanning electron microscope (SEM) images. Pea flour giving the hardest structure, lowest specific volume and gelatinization degree was determined to be the least acceptable legume flour. On the other hand, lentil and chickpea flour containing cakes had the softest structure and highest specific volume showing that lentil and chickpea flour can be used to produce functional cakes.

  16. Acupuncture for migraine prophylaxis: a randomized controlled trial

    PubMed Central

    Li, Ying; Zheng, Hui; Witt, Claudia M.; Roll, Stephanie; Yu, Shu-guang; Yan, Jie; Sun, Guo-jie; Zhao, Ling; Huang, Wen-jing; Chang, Xiao-rong; Zhang, Hong-xing; Wang, De-jun; Lan, Lei; Zou, Ran; Liang, Fan-rong

    2012-01-01

    Background: Acupuncture is commonly used to treat migraine. We assessed the efficacy of acupuncture at migraine-specific acupuncture points compared with other acupuncture points and sham acupuncture. Methods: We performed a multicentre, single-blind randomized controlled trial. In total, 480 patients with migraine were randomly assigned to one of four groups (Shaoyang-specific acupuncture, Shaoyang-nonspecific acupuncture, Yangming-specific acupuncture or sham acupuncture [control]). All groups received 20 treatments, which included electrical stimulation, over a period of four weeks. The primary outcome was the number of days with a migraine experienced during weeks 5–8 after randomization. Our secondary outcomes included the frequency of migraine attack, migraine intensity and migraine-specific quality of life. Results: Compared with patients in the control group, patients in the acupuncture groups reported fewer days with a migraine during weeks 5–8, however the differences between treatments were not significant (p > 0.05). There was a significant reduction in the number of days with a migraine during weeks 13–16 in all acupuncture groups compared with control (Shaoyang-specific acupuncture v. control: difference –1.06 [95% confidence interval (CI) –1.77 to –0.5], p = 0.003; Shaoyang-nonspecific acupuncture v. control: difference –1.22 [95% CI –1.92 to –0.52], p < 0.001; Yangming-specific acupuncture v. control: difference –0.91 [95% CI –1.61 to –0.21], p = 0.011). We found that there was a significant, but not clinically relevant, benefit for almost all secondary outcomes in the three acupuncture groups compared with the control group. We found no relevant differences between the three acupuncture groups. Interpretation: Acupuncture tested appeared to have a clinically minor effect on migraine prophylaxis compared with sham acupuncture. Trial Registration: Clinicaltrials.gov NCT00599586 PMID:22231691

  17. A simple model-based control for Pichia pastoris allows a more efficient heterologous protein production bioprocess.

    PubMed

    Cos, Oriol; Ramon, Ramon; Montesinos, José Luis; Valero, Francisco

    2006-09-05

    A predictive control algorithm coupled with a PI feedback controller has been satisfactorily implemented in the heterologous Rhizopus oryzae lipase production by Pichia pastoris methanol utilization slow (Mut(s)) phenotype. This control algorithm has allowed the study of the effect of methanol concentration, ranging from 0.5 to 1.75 g/L, on heterologous protein production. The maximal lipolytic activity (490 UA/mL), specific yield (11,236 UA/g(biomass)), productivity (4,901 UA/L . h), and specific productivity (112 UA/g(biomass)h were reached for a methanol concentration of 1 g/L. These parameters are almost double than those obtained with a manual control at a similar methanol set-point. The study of the specific growth, consumption, and production rates showed different patterns for these rates depending on the methanol concentration set-point. Results obtained have shown the need of implementing a robust control scheme when reproducible quality and productivity are sought. It has been demonstrated that the model-based control proposed here is a very efficient, robust, and easy-to-implement strategy from an industrial application point of view. (c) 2006 Wiley Periodicals, Inc.

  18. Relationship among family environment, self-control, friendship quality, and adolescents’ smartphone addiction in South Korea: Findings from nationwide data

    PubMed Central

    Kim, Hye-Jin; Min, Jin-Young; Lee, Tae-Jin; Yoo, Seunghyun

    2018-01-01

    Background Many studies have examined the negative impact on smartphone addiction in adolescents. Recent concerns have focused on predictors of smartphone addiction. This study aimed to investigate the association of adolescents’ smartphone addiction with family environment (specifically, domestic violence and parental addiction). We further investigated whether self-control and friendship quality, as predictors of smartphone addiction, may reduce the observed risk. Methods We used the 2013 national survey on internet usage and utilization data from the National Information Agency of Korea. Information on exposure and covariates included self-reported experience of domestic violence and parental addiction, sociodemographic variables, and other variables potentially related to smartphone addiction. Smartphone addiction was estimated using a smartphone addiction proneness scale, a standardized measure developed by national institutions in Korea. Results Adolescents who had experienced domestic violence (OR = 1.74; 95% CI: 1.23–2.45) and parental addiction (OR = 2.01; 95% CI: 1.24–3.27) were found to be at an increased risk for smartphone addiction after controlling for all potential variables. Furthermore, on classifying adolescents according to their level of self-control and friendship quality the association between domestic violence and parental addiction, and smartphone addiction was found to be significant in the group with adolescents with lower levels of self-control (OR = 2.87; 95% CI: 1.68–4.90 and OR = 1.95; 95% CI: 1.34–2.83) and friendship quality (OR = 2.33; 95% CI: 1.41–3.85 and OR = 1.83; 95% CI: 1.26–2.64). Conclusion Our findings suggest that family dysfunction was significantly associated with smartphone addiction. We also observed that self-control and friendship quality act as protective factors against adolescents’ smartphone addiction. PMID:29401496

  19. Relationship among family environment, self-control, friendship quality, and adolescents' smartphone addiction in South Korea: Findings from nationwide data.

    PubMed

    Kim, Hye-Jin; Min, Jin-Young; Min, Kyoung-Bok; Lee, Tae-Jin; Yoo, Seunghyun

    2018-01-01

    Many studies have examined the negative impact on smartphone addiction in adolescents. Recent concerns have focused on predictors of smartphone addiction. This study aimed to investigate the association of adolescents' smartphone addiction with family environment (specifically, domestic violence and parental addiction). We further investigated whether self-control and friendship quality, as predictors of smartphone addiction, may reduce the observed risk. We used the 2013 national survey on internet usage and utilization data from the National Information Agency of Korea. Information on exposure and covariates included self-reported experience of domestic violence and parental addiction, sociodemographic variables, and other variables potentially related to smartphone addiction. Smartphone addiction was estimated using a smartphone addiction proneness scale, a standardized measure developed by national institutions in Korea. Adolescents who had experienced domestic violence (OR = 1.74; 95% CI: 1.23-2.45) and parental addiction (OR = 2.01; 95% CI: 1.24-3.27) were found to be at an increased risk for smartphone addiction after controlling for all potential variables. Furthermore, on classifying adolescents according to their level of self-control and friendship quality the association between domestic violence and parental addiction, and smartphone addiction was found to be significant in the group with adolescents with lower levels of self-control (OR = 2.87; 95% CI: 1.68-4.90 and OR = 1.95; 95% CI: 1.34-2.83) and friendship quality (OR = 2.33; 95% CI: 1.41-3.85 and OR = 1.83; 95% CI: 1.26-2.64). Our findings suggest that family dysfunction was significantly associated with smartphone addiction. We also observed that self-control and friendship quality act as protective factors against adolescents' smartphone addiction.

  20. Development and demonstration of manufacturing processes for fabricating graphite/LARC-160 polyimide structural elements, part 4, paragraph B

    NASA Technical Reports Server (NTRS)

    1980-01-01

    A quality assurance program was developed which included specifications for celion/LARC-160 polyimide materials and quality control of materials and processes. The effects of monomers and/or polymer variables and prepeg variables on the processibility of celion/LARC prepeg were included. Processes for fabricating laminates, honeycomb core panels, and chopped fiber moldings were developed. Specimens and conduct tests were fabricated to qualify the processes for fabrication of demonstration components.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top