[Contemporary history of medicine: issues and approaches].

PubMed

Schlich, Thomas

2007-01-01

This paper illuminates specific aspects of writing contemporary history of medicine. The first section deals with specific methodological problems in the historiography of modem medicine. Topics discussed include the specific situation concerning contemporary source material, oral history, the use of theories in historiography, the problem of temporal proximity and the issue of the necessity of medical technical knowledge on part of the historian. In the second section the paper ends with a discussion of the purpose and objectives of contemporary history of medicine.

The Relevance of Feenberg's Critical Theory of Technology to Critical Visual Literacy: The Case of Scientific and Technical Illustrations

ERIC Educational Resources Information Center

Northcut, Kathryn M.

2007-01-01

Andrew Feenberg's critical theory of technology is an underutilized, relatively unknown resource in technical communication which could be exploited not only for its potential clarification of large social issues that involve our discipline, but also specifically toward the development of a critical theory of illustrations. Applications of…

Application of Surface Analysis Methods to Nanomaterials: Summaryof ISO/TC 201 Technical Report: ISO 14187:2011 -Surface Chemical Analysis- Characterization of Nanomaterials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baer, Donald R.

ISO Technical Report (TR) 14187 provides an introduction to (and examples of) the information that can be obtained about nanostructured materials using surface-analysis tools. In addition, both general issues and challenges associated with characterising nanostructured materials and the specific opportunities and challenges associated with individual analytical methods are identified. As the size of objects or components of materials approaches a few nanometres, the distinctions among 'bulk', 'surface' and 'particle' analysis blur. This Technical Report focuses on issues specifically relevant to surface chemical analysis of nanostructured materials. The report considers a variety of analysis methods but focuses on techniques that aremore » in the domain of ISO/TC 201 including Auger electron spectroscopy, X-ray photoelectron spectroscopy, secondary ion mass spectrometry, and scanning probe microscopy. Measurements of nanoparticle surface properties such as surface potential that are often made in a solution are not discussed.« less

Technical viability and development needs for waste forms and facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pegg, I.; Gould, T.

1996-05-01

The objective of this breakout session was to provide a forum to discuss technical issues relating to plutonium-bearing waste forms and their disposal facilities. Specific topics for discussion included the technical viability and development needs associated with the waste forms and/or disposal facilities. The expected end result of the session was an in-depth (so far as the limited time would allow) discussion of key issues by the session participants. The session chairs expressed allowance for, and encouragement of, alternative points of view, as well as encouragement for discussion of any relevant topics not addressed in the paper presentations. It wasmore » not the intent of this session to recommend or advocate any one technology over another.« less

How to investigate neuro-biochemical relationships on a regional level in humans? Methodological considerations for combining functional with biochemical imaging.

PubMed

Duncan, Niall W; Wiebking, Christine; Muñoz-Torres, Zeidy; Northoff, Georg

2014-01-15

There is an increasing interest in combining different imaging modalities to investigate the relationship between neural and biochemical activity. More specifically, imaging techniques like MRS and PET that allow for biochemical measurement are combined with techniques like fMRI and EEG that measure neural activity in different states. Such combination of neural and biochemical measures raises not only technical issues, such as merging the different data sets, but also several methodological issues. These methodological issues – ranging from hypothesis generation and hypothesis-guided use of technical facilities to target measures and experimental measures – are the focus of this paper. We discuss the various methodological problems and issues raised by the combination of different imaging methodologies in order to investigate neuro-biochemical relationships on a regional level in humans. For example, the choice of transmitter and scan type is discussed, along with approaches to allow the establishment of particular specificities (such as regional or biochemical) to in turn make results fully interpretable. An algorithm that can be used as a form of checklist for designing such multimodal studies is presented. The paper concludes that while several methodological and technical caveats needs to be overcome and addressed, multimodal imaging of the neuro-biochemical relationship provides an important tool to better understand the physiological mechanisms of the human brain.

How to investigate neuro-biochemical relationships on a regional level in humans? Methodological considerations for combining functional with biochemical imaging.

PubMed

Duncan, Niall W; Wiebking, Christine; Munoz-Torres, Zeidy; Northoff, Georg

2013-10-25

There is an increasing interest in combining different imaging modalities to investigate the relationship between neural and biochemical activity. More specifically, imaging techniques like MRS and PET that allow for biochemical measurement are combined with techniques like fMRI and EEG that measure neural activity in different states. Such combination of neural and biochemical measures raises not only technical issues, such as merging the different data sets, but also several methodological issues. These methodological issues - ranging from hypothesis generation and hypothesis-guided use of technical facilities to target measures and experimental measures - are the focus of this paper. We discuss the various methodological problems and issues raised by the combination of different imaging methodologies in order to investigate neuro-biochemical relationships on a regional level in humans. For example, the choice of transmitter and scan type is discussed, along with approaches to allow the establishment of particular specificities (such as regional or biochemical) to in turn make results fully interpretable. An algorithm that can be used as a form of checklist for designing such multimodal studies is presented. The paper concludes that while several methodological and technical caveats needs to be overcome and addressed, multimodal imaging of the neuro-biochemical relationship provides an important tool to better understand the physiological mechanisms of the human brain. Copyright © 2013. Published by Elsevier B.V.

Space transfer concepts and analysis for exploration missions

NASA Technical Reports Server (NTRS)

Woodcock, Gordon R.

1992-01-01

The current technical effort is part of the third phase of a broad-scoped and systematic study of space transfer concepts for human lunar and Mars missions. The study addressed the technical issues relating to the First Lunar Outpost (FLO) habitation vehicle with emphasis on the structure, power, life support system, and radiation environment for a baseline habitat with specific alternatives for the baseline.

Interventional articular and para-articular knee procedures

PubMed Central

Lalam, Radhesh K; Winn, Naomi

2016-01-01

The knee is a common area of the body to undergo interventional procedures. This article discusses image-guided interventional issues specific to the knee area. The soft tissues in and around the knee are frequently affected by sport-related injuries and often need image-guided intervention. This article details the specific technical issues related to intervention in these soft tissues, including the iliotibial tract, fat pads, patellar tendon and other tendons, bursae and the meniscus. Most often, simple procedures such as injection and aspiration are performed without image guidance. Rarely image-guided diagnostic arthrography and therapeutic joint injections are necessary. The technique, indications and diagnostic considerations for arthrography are discussed in this article. Primary bone and soft-tissue tumours may involve the knee and adjacent soft tissues. Image-guided biopsies are frequently necessary for these lesions; this article details the technical issues related to image-guided biopsy around the knee. A number of newer ablation treatments are now available, including cryoablation, high-frequency ultrasound and microwave ablation. Radiofrequency ablation, however, still remains the most commonly employed ablation technique. The indications, technical and therapeutic considerations related to the application of this technique around the knee are discussed here. Finally, we briefly discuss some newer, but as of yet, unproven image-guided interventions for osteochondral lesions and Brodie's abscess. PMID:26682669

Technical variables in high-throughput miRNA expression profiling: much work remains to be done.

PubMed

Nelson, Peter T; Wang, Wang-Xia; Wilfred, Bernard R; Tang, Guiliang

2008-11-01

MicroRNA (miRNA) gene expression profiling has provided important insights into plant and animal biology. However, there has not been ample published work about pitfalls associated with technical parameters in miRNA gene expression profiling. One source of pertinent information about technical variables in gene expression profiling is the separate and more well-established literature regarding mRNA expression profiling. However, many aspects of miRNA biochemistry are unique. For example, the cellular processing and compartmentation of miRNAs, the differential stability of specific miRNAs, and aspects of global miRNA expression regulation require specific consideration. Additional possible sources of systematic bias in miRNA expression studies include the differential impact of pre-analytical variables, substrate specificity of nucleic acid processing enzymes used in labeling and amplification, and issues regarding new miRNA discovery and annotation. We conclude that greater focus on technical parameters is required to bolster the validity, reliability, and cultural credibility of miRNA gene expression profiling studies.

Identity Management Systems in Healthcare: The Issue of Patient Identifiers

NASA Astrophysics Data System (ADS)

Soenens, Els

According to a recent recommendation of the European Commission, now is the time for Europe to enhance interoperability in eHealth. Although interoperability of patient identifiers seems promising for matters of patient mobility, patient empowerment and effective access to care, we see that today there is indeed a considerable lack of interoperability in the field of patient identification. Looking from a socio-technical rather than a merely technical point of view, one can understand the fact that the development and implementation of an identity management system in a specific healthcare context is influenced by particular social practices, affected by socio-economical history and the political climate and regulated by specific data protection legislations. Consequently, the process of making patient identification in Europe more interoperable is a development beyond semantic and syntactic levels. In this paper, we gives some examples of today’s patient identifier systems in Europe, discuss the issue of interoperability of (unique) patient identifiers from a socio-technical point of view and try not to ignore the ‘privacy side’ of the story.

EUV via hole pattern fidelity enhancement through novel resist and post-litho plasma treatment

NASA Astrophysics Data System (ADS)

Yaegashi, Hidetami; Koike, Kyohei; Fonseca, Carlos; Yamashita, Fumiko; Kaushik, Kumar; Morikita, Shinya; Ito, Kiyohito; Yoshimura, Shota; Timoshkov, Vadim; Maslow, Mark; Jee, Tae Kwon; Reijnen, Liesbeth; Choi, Peter; Feng, Mu; Spence, Chris; Schoofs, Stijn

2018-03-01

Extreme UV(EUV) technology must be potential solution for sustainable scaling, and its adoption in high volume manufacturing(HVM) is getting realistic more and more. This technology has a wide capability to mitigate various technical problem in Multi-patterning (LELELE) for via hole patterning with 193-i. It induced local pattern fidelity error such like CDU, CER, Pattern placement error. Exactly, EUV must be desirable scaling-driving tool, however, specific technical issue, named RLS (Resolution-LER-Sensitivity) triangle, obvious remaining issue. In this work, we examined hole patterning sensitizing (Lower dose approach) utilizing hole patterning restoration technique named "CD-Healing" as post-Litho. treatment.

A review of design issues specific to hypersonic flight vehicles

NASA Astrophysics Data System (ADS)

Sziroczak, D.; Smith, H.

2016-07-01

This paper provides an overview of the current technical issues and challenges associated with the design of hypersonic vehicles. Two distinct classes of vehicles are reviewed; Hypersonic Transports and Space Launchers, their common features and differences are examined. After a brief historical overview, the paper takes a multi-disciplinary approach to these vehicles, discusses various design aspects, and technical challenges. Operational issues are explored, including mission profiles, current and predicted markets, in addition to environmental effects and human factors. Technological issues are also reviewed, focusing on the three major challenge areas associated with these vehicles: aerothermodynamics, propulsion, and structures. In addition, matters of reliability and maintainability are also presented. The paper also reviews the certification and flight testing of these vehicles from a global perspective. Finally the current stakeholders in the field of hypersonic flight are presented, summarizing the active programs and promising concepts.

Recommendations for describing statistical studies and results in general readership science and engineering journals.

PubMed

Gardenier, John S

2012-12-01

This paper recommends how authors of statistical studies can communicate to general audiences fully, clearly, and comfortably. The studies may use statistical methods to explore issues in science, engineering, and society or they may address issues in statistics specifically. In either case, readers without explicit statistical training should have no problem understanding the issues, the methods, or the results at a non-technical level. The arguments for those results should be clear, logical, and persuasive. This paper also provides advice for editors of general journals on selecting high quality statistical articles without the need for exceptional work or expense. Finally, readers are also advised to watch out for some common errors or misuses of statistics that can be detected without a technical statistical background.

EFF HOT Topics: Strategies and Tools for Teaching with EFF. Volume 4, Number 1, Winter 2005

ERIC Educational Resources Information Center

Bingman, Beth, Ed.

2005-01-01

"EFF HOT (Highlights on Teaching Topics) Topics" is a publication of the EFF (Equipped for the Future) Center for Training and Technical Assistance. Each issue concentrates on a specific topic, highlighting examples of actual practice and offering strategies and tools for using EFF in the classroom. In this issue, "HOT Topics" focuses on the…

Advanced Small Modular Reactor (SMR) Probabilistic Risk Assessment (PRA) Technical Exchange Meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis

2013-09-01

During FY13, the INL developed an advanced SMR PRA framework which has been described in the report Small Modular Reactor (SMR) Probabilistic Risk Assessment (PRA) Detailed Technical Framework Specification, INL/EXT-13-28974 (April 2013). In this framework, the various areas are considered: Probabilistic models to provide information specific to advanced SMRs Representation of specific SMR design issues such as having co-located modules and passive safety features Use of modern open-source and readily available analysis methods Internal and external events resulting in impacts to safety All-hazards considerations Methods to support the identification of design vulnerabilities Mechanistic and probabilistic data needs to support modelingmore » and tools In order to describe this framework more fully and obtain feedback on the proposed approaches, the INL hosted a technical exchange meeting during August 2013. This report describes the outcomes of that meeting.« less

MOVES Model Review Work Group

EPA Pesticide Factsheets

The FACA MOVES Review Work Group was formed under the Mobile Sources Technical Review Subcommittee (MSTRS), and is charged to provide input to EPA via the MSTRS and the Clean Air Act Advisory Committee on specific issues regarding MOVES development.

Quality assurance of technical specification approval process

NASA Astrophysics Data System (ADS)

Antsev, V. Yu; Antseva, N. V.; Chernecova, E. A.

2018-03-01

The paper reviews the issue of increasing the efficiency of contract analysis on machine-building plants in accordance with process approach principles and on the basis of better interaction between marketing, finance and accounting, and R&D departments.

Teaching ethics to engineers: ethical decision making parallels the engineering design process.

PubMed

Bero, Bridget; Kuhlman, Alana

2011-09-01

In order to fulfill ABET requirements, Northern Arizona University's Civil and Environmental engineering programs incorporate professional ethics in several of its engineering courses. This paper discusses an ethics module in a 3rd year engineering design course that focuses on the design process and technical writing. Engineering students early in their student careers generally possess good black/white critical thinking skills on technical issues. Engineering design is the first time students are exposed to "grey" or multiple possible solution technical problems. To identify and solve these problems, the engineering design process is used. Ethical problems are also "grey" problems and present similar challenges to students. Students need a practical tool for solving these ethical problems. The step-wise engineering design process was used as a model to demonstrate a similar process for ethical situations. The ethical decision making process of Martin and Schinzinger was adapted for parallelism to the design process and presented to students as a step-wise technique for identification of the pertinent ethical issues, relevant moral theories, possible outcomes and a final decision. Students had greatest difficulty identifying the broader, global issues presented in an ethical situation, but by the end of the module, were better able to not only identify the broader issues, but also to more comprehensively assess specific issues, generate solutions and a desired response to the issue.

WHO Working Group on Technical Specifications for Manufacture and Evaluation of Yellow Fever Vaccines, Geneva, Switzerland, 13-14 May 2009.

PubMed

Ferguson, Morag; Shin, Jinho; Knezevic, Ivana; Minor, Philip; Barrett, Alan

2010-12-06

In May 2009, WHO convened a meeting of Working Group on Technical Specifications for Manufacturing and Evaluating Yellow Fever (YF) Vaccines, Geneva, Switzerland to initiate revision of the WHO Recommendations (formerly, Requirements) for YF vaccine published in WHO Technical Report Series number 872 (1998). The Working Group, consisting of experts from academia, industry, national regulatory authorities and national control laboratories, reviewed the latest issues of safety, efficacy and quality of YF vaccines and agreed that (i) the revision should focus on live attenuated YF vaccine virus 17D lineage; and that (ii) nonclinical and clinical guidelines for new vaccines prepared from 17D lineage be developed. Copyright © 2010. Published by Elsevier Ltd.. All rights reserved.

Controlled Waveform Magnets

NASA Astrophysics Data System (ADS)

Campbell, L. J.; Schlllig, J. B.

Issues for the design and operation of high field controlled waveform magnets and their power supplies are discussed. The basic technical elements are reviewed and applied to problems specific to this class of magnets. Examples are given along with a guide to the literature.

Steam Injection For Soil And Aquifer Remediation

EPA Pesticide Factsheets

The purpose of this Issue Paper is to provide to those involved in assessing remediation technologies for specific sites basic technical information on the use of steam injection for the remediation of soils and aquifers that are contaminated by...

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANUP OF AUTOMOTIVE RECYCLING BROWNFIELDS

EPA Science Inventory

The guidance document gives assistance to communities, decision-makers, states and municipalities, academia, and the private sector to address issues related to the redevelopment of Brownfields sites, specifically automotive recycling sites. The document helps users to understand...

Ethical questions must be considered for electronic health records.

PubMed

Spriggs, Merle; Arnold, Michael V; Pearce, Christopher M; Fry, Craig

2012-09-01

National electronic health record initiatives are in progress in many countries around the world but the debate about the ethical issues and how they are to be addressed remains overshadowed by other issues. The discourse to which all others are answerable is a technical discourse, even where matters of privacy and consent are concerned. Yet a focus on technical issues and a failure to think about ethics are cited as factors in the failure of the UK health record system. In this paper, while the prime concern is the Australian Personally Controlled Electronic Health Record (PCEHR), the discussion is relevant to and informed by the international context. The authors draw attention to ethical and conceptual issues that have implications for the success or failure of electronic health records systems. Important ethical issues to consider as Australia moves towards a PCEHR system include: issues of equity that arise in the context of personal control, who benefits and who should pay, what are the legitimate uses of PCEHRs, and how we should implement privacy. The authors identify specific questions that need addressing.

Technology assessment of future intercity passenger transporation systems. Volume 2: Identification of issues affecting intercity transportation

NASA Technical Reports Server (NTRS)

1976-01-01

Papers on major issues and trends that affect the future of intercity transportation are presented. Specific areas covered include: political, social, technological, institutional, and economic mechanisms, the workings of which determine how future intercity transporation technologies will evolve and be put into service; the major issues of intercity transportation from the point of view of reform, including candidate transporation technologies; and technical analysis of trends affecting the evolution of intercity transportation technologies.

Nuclear-safety institution in France: emergence and development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vallet, B.M.

1986-01-01

This research work examines the social construction of the nuclear-safety institution in France, and the concurrent increased focus on the nuclear-risk issue. Emphasis on risk and safety, as primarily technical issues, can partly be seen as a strategy. Employed by power elites in the nuclear technostructure, this diverts emphasis away from controversial and normative questions regarding the political and social consequences of technology to questions of technology that appear to be absolute to the technology itself. Nuclear safety, which started from a preoccupation with risk related to the nuclear energy research and development process, is examined using the analytic conceptmore » of field. As a social arena patterned to achieve specific tasks, this field is dominated by a body of state engineers recognized to have high-level scientific and administrative competences. It is structured by procedures and administrative hierarchies as well as by technical rules, norms, and standards. These are formalized and rationalized through technical, economic, political, and social needs; over time; they consolidate the field into an institution. The study documents the nuclear-safety institution as an integral part of the nuclear technostructure, which has historically used the specificity of its expertise as a buffer against outside interference.« less

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANING UP BROWNFIELDS SITES: RAILROAD YARDS

EPA Science Inventory

This guidance document gives assistance to communities, decision-makers, states and municipalities, academia, and the private sector to address issues related to the redevelopment of Brownfields sites, specifically railroad yards. The document helps users to understand the proble...

Defining Requirements and Related Methods for Designing Sensorized Garments.

PubMed

Andreoni, Giuseppe; Standoli, Carlo Emilio; Perego, Paolo

2016-05-26

Designing smart garments has strong interdisciplinary implications, specifically related to user and technical requirements, but also because of the very different applications they have: medicine, sport and fitness, lifestyle monitoring, workplace and job conditions analysis, etc. This paper aims to discuss some user, textile, and technical issues to be faced in sensorized clothes development. In relation to the user, the main requirements are anthropometric, gender-related, and aesthetical. In terms of these requirements, the user's age, the target application, and fashion trends cannot be ignored, because they determine the compliance with the wearable system. Regarding textile requirements, functional factors-also influencing user comfort-are elasticity and washability, while more technical properties are the stability of the chemical agents' effects for preserving the sensors' efficacy and reliability, and assuring the proper duration of the product for the complete life cycle. From the technical side, the physiological issues are the most important: skin conductance, tolerance, irritation, and the effect of sweat and perspiration are key factors for reliable sensing. Other technical features such as battery size and duration, and the form factor of the sensor collector, should be considered, as they affect aesthetical requirements, which have proven to be crucial, as well as comfort and wearability.

77 FR 56421 - Standards of Performance for Petroleum Refineries; Standards of Performance for Petroleum...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

...On June 24, 2008, the EPA promulgated amendments to the Standards of Performance for Petroleum Refineries and new standards of performance for petroleum refinery process units constructed, reconstructed or modified after May 14, 2007. The EPA subsequently received three petitions for reconsideration of these final rules. On September 26, 2008, the EPA granted reconsideration and issued a stay for the issues raised in the petitions regarding process heaters and flares. On December 22, 2008, the EPA addressed those specific issues by proposing amendments to certain provisions for process heaters and flares and extending the stay of these provisions until further notice. The EPA also proposed technical corrections to the rules for issues that were raised in the petitions for reconsideration. In this action, the EPA is finalizing those amendments and technical corrections and is lifting the stay of all the provisions granted on September 26, 2008 and extended until further notice on December 22, 2008.

Unresolved Technical Issues in Fair Interest Measurement.

ERIC Educational Resources Information Center

Cole, Nancy S.

The problem of sex differences in interest measurement involves many technical issues and procedures. The purpose of this paper is to provide a description of the technical problems involved in construction, scoring, and interpretation of interest measures as related to sex differences and to suggest guidelines within these technical issues which…

75 FR 74713 - Reliability Monitoring, Enforcement and Compliance Issues; Notice Allowing Post-Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-01

... Monitoring, Enforcement and Compliance Issues; Notice Allowing Post-Technical Conference Comments November 23... Commission-led technical conference to explore issues associated with reliability monitoring, enforcement and...- 000, on or before December 9, 2010. \\1\\ Reliability Monitoring, Enforcement and Compliance Issues...

Seismic Design Considerations : Volume I, Technical Approaches and Results; Volume II, Appendices II-VIII

DOT National Transportation Integrated Search

2012-03-01

NJDOT has adopted AASHTO Guide Specifications for LRFD Seismic Bridge Design approved by the Highway : Subcommittee on Bridges and Structures in 2007. The main objective of research presented in this report has : been to resolve following issue...

TECHNICAL APPROACHES TO CHARACTERIZING AND REDEVELOPING BROWNFIELDS SITES: MUNICIPAL LANDFILLS AND ILLEGAL DUMPS

EPA Science Inventory

The guidance document gives assistance to communities, decision-makers, states and municipalities, academia, and the private sector to address issues related to the redevelopment of Brownfields sites, specifically, municipal landfill and illegal dump sites. The document helps use...

Website design: technical, social and medical issues for self-reporting by elderly patients.

PubMed

Taylor, Mark J; Stables, Rod; Matata, Bashir; Lisboa, Paulo J G; Laws, Andy; Almond, Peter

2014-06-01

There is growing interest in the use of the Internet for interacting with patients, both in terms of healthcare information provision and information gathering. In this article, we examine the issues in designing healthcare websites for elderly users. In particular, this article uses a year-long case study of the development of a web-based system for self-reporting of symptoms and quality of life with a view to examine the issues relating to website design for elderly users. The issues identified included the technical, social and medical aspects of website design for elderly users. The web-based system developed was based on the European Quality of Life 5-Dimensions health-status questionnaire, a commonly used tool for patient self-reporting of quality of life, and the more specific coronary revascularisation outcome questionnaire. Currently, self-reporting is generally administered in the form of paper-based questionnaires to be completed in the outpatient clinic or at home. There are a variety of issues relating to elderly users, which imply that websites for elderly patients may involve different design considerations to other types of websites.

Issues Involving The OSI Concept of Operation For Noble Gas Radionuclide Detection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carrigan, C R; Sun, Y

2011-01-21

The development of a technically sound protocol for detecting the subsurface release of noble gas radionuclides is critical to the successful operation of an on site inspection (OSI) under the CTBT and has broad ramifications for all aspects of the OSI regime including the setting of specifications for both sampling and analysis equipment used during an OSI. With NA-24 support, we are investigating a variety of issues and concerns that have significant bearing on policy development and technical guidance regarding the detection of noble gases and the creation of a technically justifiable OSI concept of operation. The work at LLNLmore » focuses on optimizing the ability to capture radioactive noble gases subject to the constraints of possible OSI scenarios. This focus results from recognizing the difficulty of detecting gas releases in geologic environments - a lesson we learned previously from the LLNL Non-Proliferation Experiment (NPE). Evaluation of a number of important noble gas detection issues, potentially affecting OSI policy, has awaited the US re-engagement with the OSI technical community. Thus, there have been numerous issues to address during the past 18 months. Most of our evaluations of a sampling or transport issue necessarily involve computer simulations. This is partly due to the lack of OSI-relevant field data, such as that provided by the NPE, and partly a result of the ability of LLNL computer-based models to test a range of geologic and atmospheric scenarios far beyond what could ever be studied in the field making this approach very highly cost effective. We review some highlights of the transport and sampling issues we have investigated during the past year. We complete the discussion of these issues with a description of a preliminary design for subsurface sampling that is intended to be a practical solution to most if not all the challenges addressed here.« less

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANING UP BROWNFIELDS SITES: PULP AND PAPER MILLS

EPA Science Inventory

This guidance document gives assistance to communities, decision-makers, states and municipalities, academia, and the private sector to address issues related to the redevelopment of Brownfields sites, specifically pulp and paper mills sites. The document helps users to understan...

An International Aerospace Information System: A Cooperative Opportunity.

ERIC Educational Resources Information Center

Blados, Walter R.; Cotter, Gladys A.

1992-01-01

Introduces and discusses ideas and issues relevant to the international unification of scientific and technical information (STI) through development of an international aerospace database (IAD). Specific recommendations for improving the National Aeronautics and Space Administration Aerospace Database (NAD) and for implementing IAD are given.…

Developmental Dyslexia, Neurolinguistic Theory and Deviations in Brain Morphology.

ERIC Educational Resources Information Center

Hynd, George W.; And Others

1991-01-01

Reviews computer tomography and magnetic resonance imaging studies examining deviations in brain morphology. Discusses methodological and technical issues. Concludes that dyslexics show variations in specific brain regions. Suggests that neuroimaging procedures appear to provide direct evidence supporting the importance of deviations in normal…

Identification of Crew-Systems Interactions and Decision Related Trends

NASA Technical Reports Server (NTRS)

Jones, Sharon Monica; Evans, Joni K.; Reveley, Mary S.; Withrow, Colleen A.; Ancel, Ersin; Barr, Lawrence

2013-01-01

NASA Vehicle System Safety Technology (VSST) project management uses systems analysis to identify key issues and maintain a portfolio of research leading to potential solutions to its three identified technical challenges. Statistical data and published safety priority lists from academic, industry and other government agencies were reviewed and analyzed by NASA Aviation Safety Program (AvSP) systems analysis personnel to identify issues and future research needs related to one of VSST's technical challenges, Crew Decision Making (CDM). The data examined in the study were obtained from the National Transportation Safety Board (NTSB) Aviation Accident and Incident Data System, Federal Aviation Administration (FAA) Accident/Incident Data System and the NASA Aviation Safety Reporting System (ASRS). In addition, this report contains the results of a review of safety priority lists, information databases and other documented references pertaining to aviation crew systems issues and future research needs. The specific sources examined were: Commercial Aviation Safety Team (CAST) Safety Enhancements Reserved for Future Implementation (SERFIs), Flight Deck Automation Issues (FDAI) and NTSB Most Wanted List and Open Recommendations. Various automation issues taxonomies and priority lists pertaining to human factors, automation and flight design were combined to create a list of automation issues related to CDM.

Vocational technical and adult education: Status, trends and issues related to electronic delivery

NASA Technical Reports Server (NTRS)

Rothenberg, D.

1973-01-01

Data are analyzed, and trends and issues are discussed to provide information useful to the systems designer who wishes to identify and assess the opportunities for large scale electronic delivery in vocational/technical and adult education. Issues connected with vocational/technical education are investigated, with emphasis on those issues in the current spotlight which are relevant to the possibilities of electronic delivery. The current role of media is examined in vocational/technical instruction.

The technical consideration of multi-beam mask writer for production

NASA Astrophysics Data System (ADS)

Lee, Sang Hee; Ahn, Byung-Sup; Choi, Jin; Shin, In Kyun; Tamamushi, Shuichi; Jeon, Chan-Uk

2016-10-01

Multi-beam mask writer is under development to solve the throughput and patterning resolution problems in VSB mask writer. Theoretically, the writing time is appropriate for future design node and the resolution is improved with multi-beam mask writer. Many previous studies show the feasible results of resolution, CD control and registration. Although such technical results of development tool seem to be enough for mass production, there are still many unexpected problems for real mass production. In this report, the technical challenges of multi-beam mask writer are discussed in terms of production and application. The problems and issues are defined based on the performance of current development tool compared with the requirements of mask quality. Using the simulation and experiment, we analyze the specific characteristics of electron beam in multi-beam mask writer scheme. Consequently, we suggest necessary specifications for mass production with multi-beam mask writer in the future.

Defining Requirements and Related Methods for Designing Sensorized Garments

PubMed Central

Andreoni, Giuseppe; Standoli, Carlo Emilio; Perego, Paolo

2016-01-01

Designing smart garments has strong interdisciplinary implications, specifically related to user and technical requirements, but also because of the very different applications they have: medicine, sport and fitness, lifestyle monitoring, workplace and job conditions analysis, etc. This paper aims to discuss some user, textile, and technical issues to be faced in sensorized clothes development. In relation to the user, the main requirements are anthropometric, gender-related, and aesthetical. In terms of these requirements, the user’s age, the target application, and fashion trends cannot be ignored, because they determine the compliance with the wearable system. Regarding textile requirements, functional factors—also influencing user comfort—are elasticity and washability, while more technical properties are the stability of the chemical agents’ effects for preserving the sensors’ efficacy and reliability, and assuring the proper duration of the product for the complete life cycle. From the technical side, the physiological issues are the most important: skin conductance, tolerance, irritation, and the effect of sweat and perspiration are key factors for reliable sensing. Other technical features such as battery size and duration, and the form factor of the sensor collector, should be considered, as they affect aesthetical requirements, which have proven to be crucial, as well as comfort and wearability. PMID:27240361

Design considerations for composite fuselage structure of commercial transport aircraft

NASA Technical Reports Server (NTRS)

Davis, G. W.; Sakata, I. F.

1981-01-01

The structural, manufacturing, and service and environmental considerations that could impact the design of composite fuselage structure for commercial transport aircraft application were explored. The severity of these considerations was assessed and the principal design drivers delineated. Technical issues and potential problem areas which must be resolved before sufficient confidence is established to commit to composite materials were defined. The key issues considered are: definition of composite fuselage design specifications, damage tolerance, and crashworthiness.

Strategic plan for science-U.S. Geological Survey, Ohio Water Science Center, 2010-15

USGS Publications Warehouse

,

2010-01-01

This Science Plan identifies specific scientific and technical programmatic issues of current importance to Ohio and the Nation. An examination of those issues yielded a set of five major focus areas with associated science goals and strategies that the Ohio Water Science Center will emphasize in its program during 2010-15. A primary goal of the Science Plan is to establish a relevant multidisciplinary scientific and technical program that generates high-quality products that meet or exceed the expectations of our partners while supporting the goals and initiatives of the U.S. Geological Survey. The Science Plan will be used to set the direction of new and existing programs and will influence future training and hiring decisions by the Ohio Water Science Center.

Electronic Portfolios.

ERIC Educational Resources Information Center

Purves, Alan C.

1996-01-01

Outlines three forms of electronic portfolio based on a student's work, a class project about a specific topic, and a class seminar on a broad topic. Discusses logistical problems of management, access, and cross-referencing; technical problems of input, access, and copying; and theoretical issues of the lack of realia, of ownership and copyright,…

Nutrition research in the military.

PubMed

Hill, Neil E; Fallowfield, J L; Delves, S K; Wilson, D R

2014-06-01

Military research performed in an operational environment involves mission-specific considerations. The Institute of Naval Medicine was tasked in 2008 by the Surgeon General to investigate the nutritional status of deployed British military personnel, and how this might affect body composition, physical fitness and operational capability. This paper briefly describes the logistic and technical issues specific to military research that were encountered by the study team, how these issues were overcome and how this research has influenced military practice. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Dryland ecohydrology and climate change: critical issues and technical advances

NASA Astrophysics Data System (ADS)

Wang, L.; D'Odorico, P.; Evans, J. P.; Eldridge, D.; McCabe, M. F.; Caylor, K. K.; King, E. G.

2012-04-01

Drylands cover about 40% of the terrestrial land surface and account for approximately 40% of global net primary productivity. Water is fundamental to the biophysical processes that sustain ecosystem function and food production, particularly in drylands, where a tight coupling exists between water resource availability and ecosystem productivity, surface energy balance, and biogeochemical cycles. Currently, drylands support at least 2 billion people and comprise both natural and managed ecosystems. In this synthesis, we identify some current critical issues in the understanding of dryland systems and discuss how arid and semiarid environments are responding to the changes in climate and land use. Specifically, we focus on dryland agriculture and food security, dryland population growth, desertification, shrub encroachment and dryland development issues as factors of change requiring increased understanding and management. We also review recent technical advances in the quantitative assessment of human versus climate change related drivers of desertification, evapotranspiration partitioning using field deployable stable water isotope systems and the remote sensing of key ecohydrological processes. These technological advances provide new tools that assist in addressing major critical issues in dryland ecohydrology under climate change

75 FR 48743 - Mandatory Reporting of Greenhouse Gases

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-11

...EPA is proposing to amend specific provisions in the GHG reporting rule to clarify certain provisions, to correct technical and editorial errors, and to address certain questions and issues that have arisen since promulgation. These proposed changes include providing additional information and clarity on existing requirements, allowing greater flexibility or simplified calculation methods for certain sources in a facility, amending data reporting requirements to provide additional clarity on when different types of GHG emissions need to be calculated and reported, clarifying terms and definitions in certain equations, and technical corrections.

75 FR 79091 - Mandatory Reporting of Greenhouse Gases

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

...EPA is amending specific provisions in the greenhouse gas reporting rule to clarify certain provisions, to correct technical and editorial errors, and to address certain questions and issues that have arisen since promulgation. These final changes include generally providing additional information and clarity on existing requirements, allowing greater flexibility or simplified calculation methods for certain sources, amending data reporting requirements to provide additional clarity on when different types of greenhouse gas emissions need to be calculated and reported, clarifying terms and definitions in certain equations and other technical corrections and amendments.

Single Event Effects (SEE) Testing: Practical Approach to Test Plans

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Pellish, Jonathan Allen; Berg, Melanie D.

2014-01-01

While standards and guidelines for performing SEE testing have existed for several decades, guidance for developing SEE test plans has not been as easy to find. In this presentation, the variety of areas that need to be considered ranging from resource issues (funds, personnel, schedule) to extremely technical challenges (particle interaction and circuit application), shall be discussed. Note: we consider the approach outlined here as a "living" document: Mission-specific constraints and new technology related issues always need to be taken into account.

Testbed for Satellite and Terrestrial Interoperability (TSTI)

NASA Technical Reports Server (NTRS)

Gary, J. Patrick

1998-01-01

Various issues associated with the "Testbed for Satellite and Terrestrial Interoperability (TSTI)" are presented in viewgraph form. Specific topics include: 1) General and specific scientific technical objectives; 2) ACTS experiment No. 118: 622 Mbps network tests between ATDNet and MAGIC via ACTS; 3) ATDNet SONET/ATM gigabit network; 4) Testbed infrastructure, collaborations and end sites in TSTI based evaluations; 5) the Trans-Pacific digital library experiment; and 6) ESDCD on-going network projects.

NASA's Commercial Communication Technology Program

NASA Technical Reports Server (NTRS)

Bagwell, James W.

1998-01-01

Various issues associated with "NASA's Commercial Communication Technology Program" are presented in viewgraph form. Specific topics include: 1) Coordination/Integration of government program; 2) Achievement of seamless interoperable satellite and terrestrial networks; 3) Establishment of program to enhance Satcom professional and technical workforce; 4) Precompetitive technology development; and 5) Effective utilization of spectrum and orbit assets.

Lead-Free vs Tin-Lead Reliability of Advanced Electronic Assemblies

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza

2005-01-01

This presentation will provide the technical background and specific information published in literature related to reliability test, analyses, modeling, and associated issues for lead-free solder package assemblies in comparison to their tin-lead solder alloys. It also presents current understanding of lead-free thermal cycle test performance in support.

77 FR 9219 - Environmental Management Site-Specific Advisory Board, Oak Ridge Reservation

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-16

...: Office of Scientific and Technical Information, 1 Science.gov Way, Oak Ridge, Tennessee 37830. FOR... email: [email protected]gov or check the Web site at www.oakridge.doe.gov/em/ssab . SUPPLEMENTARY... be available at the following Web site: http://www.oakridge.doe.gov/em/ssab/minutes.htm . Issued at...

Targeted Teacher Recruitment: What Is the Issue and Why Does It Matter? Policy Snapshot

ERIC Educational Resources Information Center

Aragon, Stephanie

2018-01-01

Districts across the country are facing severe shortages of teachers--especially in certain subjects (math, science, special education, career and technical education, and bilingual education) and in specific schools (urban, rural, high-poverty, high-minority, and low-achieving). The severity of the teacher shortage problem varies significantly by…

Leadership Misplacement: How Can This Affect Institutions of Higher Education?

ERIC Educational Resources Information Center

Wang, Victor C. X.; Sedivy-Benton, Amy Lynn

2016-01-01

Well-reasoned leadership theories are described in many academic books, yet they may not apply specifically to practices in higher education. In higher education, the absence of tailored leadership theories is compounded by the lack of technical skills or leadership ethics, resulting in leadership issues that impact the organization. To illustrate…

75 FR 76254 - Official Performance and Procedural Requirements for Grain Weighing Equipment and Related Grain...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-08

... requirements of the 2008 edition of the National Institute of Standards and Technology (NIST) Handbook 44, ``Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices,'' (NIST Handbook... identified as ``NIST Handbook 44 IBF Comments,'' making reference to the date and page number of this issue...

Film in Development.

ERIC Educational Resources Information Center

Information Center on Instructional Technology Report, 1976

1976-01-01

The positive and negative aspects of using film as a medium for inducing change in developing nations are explored in this issue. Critics of the use of film for development cite (1) the culture specific nature of film content of foreign produced films; (2) the technical, economic, and logistical problems of in-country production; and (3) lack of…

Operational Interventions to Maintenance Error

NASA Technical Reports Server (NTRS)

Kanki, Barbara G.; Walter, Diane; Dulchinos, VIcki

1997-01-01

A significant proportion of aviation accidents and incidents are known to be tied to human error. However, research of flight operational errors has shown that so-called pilot error often involves a variety of human factors issues and not a simple lack of individual technical skills. In aircraft maintenance operations, there is similar concern that maintenance errors which may lead to incidents and accidents are related to a large variety of human factors issues. Although maintenance error data and research are limited, industry initiatives involving human factors training in maintenance have become increasingly accepted as one type of maintenance error intervention. Conscientious efforts have been made in re-inventing the team7 concept for maintenance operations and in tailoring programs to fit the needs of technical opeRAtions. Nevertheless, there remains a dual challenge: 1) to develop human factors interventions which are directly supported by reliable human error data, and 2) to integrate human factors concepts into the procedures and practices of everyday technical tasks. In this paper, we describe several varieties of human factors interventions and focus on two specific alternatives which target problems related to procedures and practices; namely, 1) structured on-the-job training and 2) procedure re-design. We hope to demonstrate that the key to leveraging the impact of these solutions comes from focused interventions; that is, interventions which are derived from a clear understanding of specific maintenance errors, their operational context and human factors components.

Reduction of Maintenance Error Through Focused Interventions

NASA Technical Reports Server (NTRS)

Kanki, Barbara G.; Walter, Diane; Rosekind, Mark R. (Technical Monitor)

1997-01-01

It is well known that a significant proportion of aviation accidents and incidents are tied to human error. In flight operations, research of operational errors has shown that so-called "pilot error" often involves a variety of human factors issues and not a simple lack of individual technical skills. In aircraft maintenance operations, there is similar concern that maintenance errors which may lead to incidents and accidents are related to a large variety of human factors issues. Although maintenance error data and research are limited, industry initiatives involving human factors training in maintenance have become increasingly accepted as one type of maintenance error intervention. Conscientious efforts have been made in re-inventing the "team" concept for maintenance operations and in tailoring programs to fit the needs of technical operations. Nevertheless, there remains a dual challenge: to develop human factors interventions which are directly supported by reliable human error data, and to integrate human factors concepts into the procedures and practices of everyday technical tasks. In this paper, we describe several varieties of human factors interventions and focus on two specific alternatives which target problems related to procedures and practices; namely, 1) structured on-the-job training and 2) procedure re-design. We hope to demonstrate that the key to leveraging the impact of these solutions comes from focused interventions; that is, interventions which are derived from a clear understanding of specific maintenance errors, their operational context and human factors components.

48 CFR 2452.237-73 - Conduct of Work and Technical Guidance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... conditions of the contract. (c) The GTR will issue technical guidance in writing or, if issued orally, he/she... Technical Guidance. 2452.237-73 Section 2452.237-73 Federal Acquisition Regulations System DEPARTMENT OF... Provisions and Clauses 2452.237-73 Conduct of Work and Technical Guidance. As prescribed in 2437.110(d...

Gender Issues in Technical Communication Studies: An Overview of the Implications for the Profession, Research, and Pedagogy.

ERIC Educational Resources Information Center

Allen, Jo

1991-01-01

Presents an overview of research and unanswered questions related to gender issues in technical communication. Addresses the consequences of the feminization of technical communication, research on gender differences in technical communication, and the means for encouraging a more gender-balanced view of business and industry. (SR)

Advanced transportation system studies, technical area 3. Alternate propulsion subsystem concepts: J-2S restart study

NASA Astrophysics Data System (ADS)

Vilja, John; Levack, Daniel

1993-04-01

The objectives were to assess what design changes would be required to remit late production of the J-2S engine for use as a large high energy upper stage engine. The study assessed design changes required to perform per the J-2S model specification, manufacturing changes required due to obsolescence or improvements in state-of-the-practice, availability issues for supplier provided items, and provided cost and schedule estimates for this configuration. The confidence that J-2S production could be reinitiated within reasonable costs and schedules was provided. No significant technical issues were identified in either the producibility study or in the review of previous technical data. Areas of potential cost reduction were identified which could be quantified to a greater extent with further manufacturing planning. The proposed schedule can be met with no foreseeable impacts. The results of the study provided the necessary foundation for the detailed manufacturing and test plans and non-recurring and recurring cost estimates that are needed to complete the effort to reinitiate production of the J-2S engine system.

Aid in a city at war: the case of Mogadishu, Somalia.

PubMed

Grünewald, François

2012-07-01

Mogadishu, the capital of Somalia, has been central to life, war, and peace in the country for almost two decades. Its urban characteristics, though, have been put to one side for the most part. In recent years, Mogadishu-related issues have been merged mostly into a global agenda for South and Central Somalia, resulting in the technical and coordination approaches employed in the city largely being reproductions of solutions utilised in refugee camps and rural areas. Unfortunately, urban problems require urban solutions. The aid system is just starting to discover how specific aid in cities at war should be, both from an organisational and a technical standpoint. The enhancement of aid practices in an urban setting implies, among other things, a more strategic approach to the specific spatial characteristics of the city, a more fine-tuned analysis of the technical requirements of the urban service delivery systems, and a better understanding of the role of urban institutions. © 2012 The Author(s). Journal compilation © Overseas Development Institute, 2012.

Medical technology at home: safety-related items in technical documentation.

PubMed

Hilbers, Ellen S M; de Vries, Claudette G J C A; Geertsma, Robert E

2013-01-01

This study aimed to investigate the technical documentation of manufacturers on issues of safe use of their device in a home setting. Three categories of equipment were selected: infusion pumps, ventilators, and dialysis systems. Risk analyses, instructions for use, labels, and post market surveillance procedures were requested from manufacturers. Additionally, they were asked to fill out a questionnaire on collection of field experience, on incidents, and training activities. Specific risks of device operation by lay users in a home setting were incompletely addressed in the risk analyses. A substantial number of user manuals were designed for professionals, rather than for patients or lay carers. Risk analyses and user information often showed incomplete coherence. Post market surveillance was mainly based on passive collection of field experiences. Manufacturers of infusion pumps, ventilators, and dialysis systems pay insufficient attention to the specific risks of use by lay persons in home settings. It is expected that this conclusion is also applicable for other medical equipment for treatment at home. Manufacturers of medical equipment for home use should pay more attention to use errors, lay use and home-specific risks in design, risk analysis, and user information. Field experiences should be collected more actively. Coherence between risk analysis and user information should be improved. Notified bodies should address these aspects in their assessment. User manuals issued by institutions supervising a specific home therapy should be drawn up in consultation with the manufacturer.

Establishment of the International Power Institute. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Julius E. Coles

The International Power Institute, in collaboration with American industries, seeks to address technical, political, economic and cultural issues of developing countries in the interest of facilitating profitable transactions in power related infrastructure projects. IPI works with universities, governments and commercial organizations to render project-specific recommendations for private-sector investment considerations. IPI also established the following goals: Facilitate electric power infrastructure transactions between developing countries and the US power industry; Collaborate with developing countries to identify development strategies to achieve energy stability; and Encourage market driven solutions and work collaboratively with other international trade energy, technology and banking organizations.

Bibliography of Lewis Research Center technical contributions announced in 1976

NASA Technical Reports Server (NTRS)

1977-01-01

Abstracts of Lewis authored publications and publications resulting from Lewis managed contracts which were announced in the 1976 issues of STAR (Scientific and Technical Aerospace Reports) and IAA (International Aerospace Abstracts) are presented. Research reports, journal articles, conference presentations, patents and patent applications, and these are included. The arrangement is by NASA subject category. Citations indicate report literature (identified by their N-numbers) and the journal and conference presentations (identified by their A-numbers). A grouping of indexes helps locate specific publications by author (including contractor authors), contractor organization, contract number, and report number.

78 FR 23241 - Environmental Management Site-Specific Advisory Board, Oak Ridge Reservation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-18

... of Energy Information Center, Office of Science and Technical Information, 1 Science.gov Way, Oak...-3315; Fax (865) 576-0956 or email: [email protected]gov or check the Web site at www.oakridge.doe.gov/em... also be available at the following Web site: http://www.oakridge.doe.gov/em/ssab/minutes.htm . Issued...

Advanced Spectral Modeling Development

DTIC Science & Technology

1992-09-14

above, the AFGL line-by-line code already possesses many of the attributes desired of a generally applicable transmittance/radiance simulation code, it...transmittance calculations, (b) perform generalized multiple scattering calculations, (c) calculate both heating and dissociative fluxes, (d) provide...This report is subdivided into task specific subsections. The following section describes our general approach to address these technical issues (Section

Your EHR license agreement: critical issues.

PubMed

Shay, Daniel F

2014-01-01

This article discusses several key provisions and concepts in software license agreements for electronic health records. It offers insight into what physician practices can expect to find in their license agreements, as well as practical advice on beneficial provisions. The article examines contractual language relating to term and termination, technical specifications and support, and compliance with governmental programs.

Final Assessment of Manual Ultrasonic Examinations Applied to Detect Flaws in Primary System Dissimilar Metal Welds at North Anna Power Station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Michael T.; Diaz, Aaron A.; Cinson, Anthony D.

2014-03-24

PNNL conducted a technical assessment of the NDE issues and protocols that led to missed detections of several axially oriented flaws in a steam generator primary inlet dissimilar metal weld at North Anna Power Station, Unit 1 (NAPS-1). This particular component design exhibits a significant outside-diameter (OD) taper that is not included as a blind performance demonstration mock-up within the industry’s Performance Demonstration Initiative, administered by EPRI. For this reason, the licensee engaged EPRI to assist in the development of a technical justification to support the basis for a site-specific qualification. The service-induced flaws at NAPS-1 were eventually detected asmore » a result of OD surface machining in preparation for a full structural weld overlay. The machining operation uncovered the existence of two through-wall flaws, based on the observance of primary water leaking from the dissimilar metal weld. A total of five axially oriented flaws were detected in varied locations around the weld circumference. The field volumetric examination that was conducted at NAPS-1 was a non-encoded, real-time manual ultrasonic examination. PNNL conducted both an initial assessment, and subsequently, a more rigorous technical evaluation (reported here), which has identified an array of NDE issues that may have led to the subject missed detections. These evaluations were performed through technical reviews and discussions with NRC staff, EPRI NDE Center personnel, industry and ISI vendor personnel, and ultrasonic transducer manufacturers, and laboratory tests, to better understand the underlying issues at North Anna.« less

A review on remote monitoring technology applied to implantable electronic cardiovascular devices.

PubMed

Costa, Paulo Dias; Rodrigues, Pedro Pereira; Reis, António Hipólito; Costa-Pereira, Altamiro

2010-12-01

Implantable electronic cardiovascular devices (IECD) include a broad spectrum of devices that have the ability to maintain rhythm, provide cardiac resynchronization therapy, and/or prevent sudden cardiac death. The incidence of bradyarrhythmias and other cardiac problems led to a broader use of IECD, which turned traditional follow-up into an extremely heavy burden for healthcare systems to support. Our aim was to assess the impact of remote monitoring on the follow-up of patients with IECD. We performed a review through PubMed using a specific query. The paper selection process included a three-step approach in which title, abstract, and cross-references were analyzed. Studies were then selected using previously defined inclusion criteria and analyzed according to the country of origin of the study, year, and journal of publication; type of study; and main issues covered. Twenty articles were included in this review. Eighty percent of the selected papers addressed clinical issues, from which 94% referred clinical events identification, clinical stability, time savings, or physician satisfaction as advantages, whereas 38% referred disadvantages that included both legal and technical issues. Forty-five percent of the papers referred patient issues, from which 89% presented advantages, focusing on patient acceptance/satisfaction, and patient time-savings. The main downsides were technical issues but patient privacy was also addressed. All the papers dealing with economic issues (20%) referred both advantages and disadvantages equally. Remote monitoring is presently a safe technology, widely accepted by patients and physicians, for its convenience, reassurance, and diagnostic potential. This review summarizes the principles of remote IECD monitoring presenting the current state-of-the-art. Patient safety and device interaction, applicability of current technology, and limitations of remote IECD monitoring are also addressed. The use of remote monitor should consider the selection of patients, the type of disease, and centers' availability to receive, interpret and respond to device alerts. Before remote IECD monitoring can be routinely used, technical, procedure, and ethical/legal issues should be addressed.

Water technology for specific water usage.

PubMed

Frimmel, Fritz H

2003-01-01

Water is the basis for life and culture. In addition to the availability of water its quality has become a major issue in industrialized areas and in developing countries as well. Water usage has to be seen as part of the hydrological cycle. As a consequence water management has to be sustainable. The aim of the contribution is to give water usage oriented quality criteria and to focus on the technical means to achieve them. Water is used for many purposes, ranging from drinking and irrigation to a broad variety of technical processes. Most applications need specific hygienic, chemical and/or physical properties. To meet these demands separation and reaction principles are applied. The reuse of water and the application of water treatment with little or no waste and by-product formation is the way to go. Membrane separation and advanced oxidation including catalytic reactions are promising methods that apply natural processes in sustainable technical performance. Thus elimination of specific water constituents (e.g. salts and metals, microorganisms) and waste water cleaning (e.g. pollutants, nutrients and organic water) can be done efficiently. Learning from nature and helping nature with appropriate technology is a convincing strategy for sustainable water management.

Standardisation in the field of nanotechnology: some issues of legitimacy.

PubMed

Forsberg, Ellen-Marie

2012-12-01

Nanotechnology will allegedly have a revolutionary impact in a wide range of fields, but has also created novel concerns about health, safety and the environment (HSE). Nanotechnology regulation has nevertheless lagged behind nanotechnology development. In 2004 the International Organization for Standardization established a technical committee for producing nanotechnology standards for terminology, measurements, HSE issues and product specifications. These standards are meant to play a role in nanotechnology development, as well as in national and international nanotechnology regulation, and will therefore have consequences for consumers, workers and the environment. This paper gives an overview of the work in the technical committee on nanotechnology and discusses some challenges with regard to legitimacy in such work. The paper focuses particularly on stakeholder involvement and the potential problems of scientific robustness when standardising in such early stages of the scientific development. The intention of the paper is to raise some important issues rather than to draw strong conclusions. However, the paper will be concluded with some suggestions for improving legitimacy in the TC 229 and a call for increased public awareness about standardisation in the field of nanotechnology.

Figures and First Years: Examining first-year Calculus I student ability to incorporate figures into technical reports

NASA Astrophysics Data System (ADS)

Antonacci, Nathan; Rogers, Michael; Pfaff, Thomas

This three-year study focused on first-year Calculus I students and their abilities to incorporate figures into technical reports. Students were handed guidelines as part of their Multidisciplinary Sustainability Education Module meant to aid them in crafting effective figures. Figure-specific questionnaires were added in the class to gain insight into the quantitative literacy skills students possessed both before starting their course and after its completion. Reviews of the figures in 78 technical reports written by 106 students showed repeated failure to refer to figures in discussion sections and use them in evidence-based arguments. Analysis of quantitative literacy skills revealed that the students could both read and interpret figures, suggesting that issues with literacy were not the main contributor to the sub-par graphs.

Update to core reporting practices in structural equation modeling.

PubMed

Schreiber, James B

This paper is a technical update to "Core Reporting Practices in Structural Equation Modeling." 1 As such, the content covered in this paper includes, sample size, missing data, specification and identification of models, estimation method choices, fit and residual concerns, nested, alternative, and equivalent models, and unique issues within the SEM family of techniques. Copyright © 2016 Elsevier Inc. All rights reserved.

A Descriptive Study of the Retention of Secondary Trade and Industrial Teachers in Kansas

ERIC Educational Resources Information Center

Su, Sho-Hsien; Dainty, Julie D.; Sandford, Brian A.; Townsend, Donald; Belcher, Gregory G.

2011-01-01

Teacher retention is an important issue which can influence the delivery of quality education. However, only a few factors have been identified in the area of career and technical education that may influence teacher retention. The purpose of this study was to identify specific factors that may influence the retention of trade and industrial…

78 FR 49738 - Environmental Management Site-Specific Advisory Board, Oak Ridge Reservation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-15

...: Department of Energy Information Center, Office of Science and Technical Information, 1 Science.gov Way, Oak...-3315; Fax (865) 576-0956 or email: n[email protected]gov or check the Web site at www.oakridge.doe.gov/em... following Web site: http://www.oakridge.doe.gov/em/ssab/board-minutes.html . Issued at Washington, DC, on...

77 FR 58364 - Environmental Management Site-Specific Advisory Board, Oak Ridge Reservation

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

...: Department of Energy Information Center, Office of Science and Technical Information, 1 Science.gov Way, Oak...-3315; Fax (865) 576-0956 or email: [email protected]gov or check the Web site at www.oakridge.doe.gov/em... following Web site: http://www.oakridge.doe.gov/em/ssab/minutes.htm . Issued at Washington, DC, on September...

78 FR 17648 - Environmental Management Site-Specific Advisory Board, Oak Ridge Reservation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-22

...: Department of Energy Information Center, Office of Science and Technical Information, 1 Science.gov Way, Oak...-3315; Fax (865) 576-0956 or email: [email protected]gov or check the Web site at www.oakridge.doe.gov/em... following Web site: http://www.oakridge.doe.gov/em/ssab/minutes.htm . Issued at Washington, DC, on March 15...

78 FR 3890 - Environmental Management Site-Specific Advisory Board, Oak Ridge Reservation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-17

...: Department of Energy Information Center, Office of Science and Technical Information, 1 Science.gov Way, Oak...-3315; Fax (865) 576-0956 or email: [email protected]gov or check the Web site at www.oakridge.doe.gov/em... following Web site: http://www.oakridge.doe.gov/em/ssab/minutes.htm . Issued at Washington, DC on January 11...

78 FR 30911 - Environmental Management Site-Specific Advisory Board, Oak Ridge Reservation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-23

...: Department of Energy Information Center, Office of Science and Technical Information, 1 Science.gov Way, Oak...-3315; Fax (865) 576-0956 or email: [email protected]gov or check the Web site at www.oakridge.doe.gov/em... following Web site: http://www.oakridge.doe.gov/em/ssab/board-minutes.html . Issued at Washington, DC, on...

Lessons learned and their application to program development and cultural issues

NASA Technical Reports Server (NTRS)

Roth, Gilbert L.

1991-01-01

The knowledge used today is contained in an untold number of technical and managerial handbooks. This knowledge is derived from the known strengths and weaknesses experienced during the execution of programs and projects that are being used today. The purpose is to stir up thought, not on specific experiences, but on implementation of lessons learned from these experiences.

Risk-Based Decision Making in a Scientific Issue: A Study of Teachers Discussing a Dilemma through a Microworld

ERIC Educational Resources Information Center

Levinson, Ralph; Kent, Phillip; Pratt, David; Kapadia, Ramesh; Yogui, Cristina

2012-01-01

Risk has now become a feature of science curricula in many industrialized countries. While risk is conceptualized within a number of different theoretical frameworks, the predominant model used in examination specifications is a utility model in which risk calculations are deemed to be objective through technical expert assessment and where the…

A Strategic Plan for Promoting and Expanding Apprenticeship in the U.S. (Phase II). Recommendations of the Federal Committee on Apprenticeship.

ERIC Educational Resources Information Center

Employment and Training Administration (DOL), Washington, DC. Office of Work-Based Learning.

In preparing Phase I of the Strategic Plan, the Federal Committee on Apprenticeship noted that efforts beyond education and technical assistance may be needed to develop apprenticeship fully in the United States. Specifically, the committee would examine and make recommendations with respect to such issues as incentives for participation,…

Dual-Energy CT: New Horizon in Medical Imaging

PubMed Central

Goo, Jin Mo

2017-01-01

Dual-energy CT has remained underutilized over the past decade probably due to a cumbersome workflow issue and current technical limitations. Clinical radiologists should be made aware of the potential clinical benefits of dual-energy CT over single-energy CT. To accomplish this aim, the basic principle, current acquisition methods with advantages and disadvantages, and various material-specific imaging methods as clinical applications of dual-energy CT should be addressed in detail. Current dual-energy CT acquisition methods include dual tubes with or without beam filtration, rapid voltage switching, dual-layer detector, split filter technique, and sequential scanning. Dual-energy material-specific imaging methods include virtual monoenergetic or monochromatic imaging, effective atomic number map, virtual non-contrast or unenhanced imaging, virtual non-calcium imaging, iodine map, inhaled xenon map, uric acid imaging, automatic bone removal, and lung vessels analysis. In this review, we focus on dual-energy CT imaging including related issues of radiation exposure to patients, scanning and post-processing options, and potential clinical benefits mainly to improve the understanding of clinical radiologists and thus, expand the clinical use of dual-energy CT; in addition, we briefly describe the current technical limitations of dual-energy CT and the current developments of photon-counting detector. PMID:28670151

A Management Model for International Participation in Space Exploration Missions

NASA Technical Reports Server (NTRS)

George, Patrick J.; Pease, Gary M.; Tyburski, Timothy E.

2005-01-01

This paper proposes an engineering management model for NASA's future space exploration missions based on past experiences working with the International Partners of the International Space Station. The authors have over 25 years of combined experience working with the European Space Agency, Japan Aerospace Exploration Agency, Canadian Space Agency, Italian Space Agency, Russian Space Agency, and their respective contractors in the design, manufacturing, verification, and integration of their elements electric power system into the United States on-orbit segment. The perspective presented is one from a specific sub-system integration role and is offered so that the lessons learned from solving issues of technical and cultural nature may be taken into account during the formulation of international partnerships. Descriptions of the types of unique problems encountered relative to interactions between international partnerships are reviewed. Solutions to the problems are offered, taking into consideration the technical implications. Through the process of investigating each solution, the important and significant issues associated with working with international engineers and managers are outlined. Potential solutions are then characterized by proposing a set of specific methodologies to jointly develop spacecraft configurations that benefits all international participants, maximizes mission success and vehicle interoperability while minimizing cost.

Aligning Career and Technical Education

ERIC Educational Resources Information Center

Workman, Ed; Stubbs, Joyce

2011-01-01

The issues and concerns facing Kentucky Career and Technical Teacher Education (KY CTTE), university teacher educators and state department Career and Technical Education (CTE) leaders in providing and preparing the best CTE teachers possible are not unique to Kentucky. In an effort to better understand these issues and concerns a team of state…

Main Chamber and Preburner Injector Technology

NASA Technical Reports Server (NTRS)

Santoro, Robert J.; Merkle, Charles L.

1999-01-01

This document reports the experimental and analytical research carried out at the Penn State Propulsion Engineering Research Center in support of NASA's plan to develop advanced technologies for future single stage to orbit (SSTO) propulsion systems. The focus of the work is on understanding specific technical issues related to bi-propellant and tri-propellant thrusters. The experiments concentrate on both cold flow demonstrations and hot-fire uni-element tests to demonstrate concepts that can be incorporated into hardware design and development. The analysis is CFD-based and is intended to support the design and interpretation of the experiments and to extrapolate findings to full-scale designs. The research is divided into five main categories that impact various SSTO development scenarios. The first category focuses on RP-1/gaseous hydrogen (GH2)/gaseous oxygen (GO2) tri-propellant combustion with specific emphasis on understanding the benefits of hydrogen addition to RP-1/oxygen combustion and in developing innovative injector technology. The second category investigates liquid oxygen (LOX)/GH2 combustion at main chamber near stoichiometric conditions to improve understanding of existing LOX/GH2 rocket systems. The third and fourth categories investigate the technical issues related with oxidizer-rich and fuel-rich propulsive concepts, issues that are necessary for developing the full-flow engine cycle. Here, injector technology issues for both LOX/GH2 and LOX/RP-1 propellants are examined. The last category, also related to the full-flow engine cycle, examines injector technology needs for GO2/GH2 propellant combustion at near-stoichiometric conditions for main chamber application.

Technical and economic evaluation of a Brayton-Rankine combined cycle solar-thermal power plant

NASA Astrophysics Data System (ADS)

Wright, J. D.; Copeland, R. J.

1981-05-01

An assessment of gas-liquid direct-contact heat exchange and of a new storage-coupled system was conducted. Both technical and economic issues are evaluated. Specifically, the storage-coupled combined cycle is compared with a molten salt system. The open Brayton cycle system is used as a topping cycle, and the reject heat powers the molten salt/Rankine system. In this study the molten salt system is left unmodified, the Brayton cycle is integrated on top of a Marietta description of an existing molten salt plant. This compares a nonoptimized combined cycle with an optimized molten salt system.

Real-time earthquake monitoring: Early warning and rapid response

NASA Technical Reports Server (NTRS)

1991-01-01

A panel was established to investigate the subject of real-time earthquake monitoring (RTEM) and suggest recommendations on the feasibility of using a real-time earthquake warning system to mitigate earthquake damage in regions of the United States. The findings of the investigation and the related recommendations are described in this report. A brief review of existing real-time seismic systems is presented with particular emphasis given to the current California seismic networks. Specific applications of a real-time monitoring system are discussed along with issues related to system deployment and technical feasibility. In addition, several non-technical considerations are addressed including cost-benefit analysis, public perceptions, safety, and liability.

Technical Basis for Electromagnetic Compatibility Regulatory Guidance Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ewing, Paul D.; Korsah, Kofi; Harrison, Thomas J.

2016-03-01

The objective of this report is to serve as the technical basis document for the next, planned revision of this RG that highlights and provides the rationale for the recommended changes. The structure of this document follows and summarizes the several assessment activities undertaken during the course of this project to evaluate new and updated electromagnetic compatibility (EMC) standards, testing methods and limits, and relevant technology developments being incorporated into plant activities that may have EMI/RFI implications, as well as other specific issues, including impacts of electrostatic discharge (ESD) on safety equipment and impacts on increased usage of wireless devicesmore » in nuclear power plants.« less

75 FR 62534 - Reliability Monitoring, Enforcement and Compliance Issues; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-12

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD11-1-000] Reliability Monitoring, Enforcement and Compliance Issues; Notice of Technical Conference October 1, 2010. The Federal...-referenced proceeding to explore issues associated with reliability monitoring, enforcement and compliance...

Geothermal Program Review VI: proceedings. Beyond goals and objectives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-01-01

Program Review VI was comprised of six sessions, including an opening session, four technical sessions that addressed each of the major DOE research areas, and a session on special issues. The technical sessions were on Hydrothermal, Hot Dry Rock, Geopressured and Magma resources. Presenters in the technical sessions discussed their R and D activities within the context of specific GTD Programmatic Objectives for that technology, their progress toward achieving those objectives, and the value of those achievements to industry. The ''Special Issues'' presentations addressed several topics such as the interactions between government and industry on geothermal energy R and D;more » the origin and basis for the programmatic objectives analytical computer model; and international marketing opportunities for US geothermal equipment and services. The unique aspect of Program Review VI was that it was held in conjunction with the National Geothermal Association's Industry Round Table on Federal R and D. The Round Table provided a forum for open and lively discussions between industry and government researchers and gave industry an opportunity to convey their needs and perspectives on DOE's research programs. These discussions also provided valuable information to DOE regarding industry's priorities and directions.« less

Publications of the Jet Propulsion Laboratory, January - December 1973. [bibliography

NASA Technical Reports Server (NTRS)

1974-01-01

Five classes of publications are included in this bibliography: (1) Technical Reports in which the information is complete for a specific accomplishment and is intended for a wide audience. (2) Articles from the bimonthly Deep Space Network Progress Report. Each volume's collection of articles presents a periodical survey of current accomplishments by the Deep Space Network. (3) Technical Memorandums, in which the information is complete for a specific accomplishment but is intended for a limited audience to satisfy unique requirements. (4) Articles from the JPL Quarterly Technical Review. Each article summarizes a recent important development, interim or final results, or an advancement in the state of the art in a scientific or engineering endeavor, This publication has been discontinued, and the issues indexed in this bibliography are the last to be published. (5) Articles published in the open literature. The publications are indexed by: (1) author, (2) subject, and (3) publication type and number. A descriptive entry appears under the name of each author of each publication; an abstract is included with the entry for the primary (first-listed) author.

Socio-Technical Considerations for the Use of Blockchain Technology in Healthcare.

PubMed

Wong, Ming Chao; Yee, Kwang Chien; Nøhr, Christian

2018-01-01

Blockchain technology is often considered as the fourth industrial revolution that will change the world. The enthusiasm of the transformative nature of blockchain technology has infiltrated healthcare. Blockchain is often seen as the much needed and perfect technology for healthcare, addressing the difficult and complex issues of security and inter-operability. More importantly, the "value" and trust-based system can deliver automated action and response via its smart contract mechanism. Healthcare, however, is a complex system. Health information technology (HIT) so far, has not delivered its promise of transforming healthcare due to its complex socio-technical and context sensitive interaction. The introduction of blockchain technology will need to consider a whole range of socio-technical issues in order to improve the quality and safety of patient care. This paper presents a discussion on these socio-technical issues. More importantly, this paper argues that in order to achieve the best outcome from blockchain technology, there is a need to consider a clinical transformation from "information" to "value " and trust. This paper argues that urgent research is needed to address these socio-technical issues in order to facilitate best outcomes for blockchain in healthcare. These socio-technical issues must then be further evaluated by means of working prototypes in the medical domain in coming years.

Fifth Report of the NASA Advisory Council Task Force on the Shuttle-Mir Rendezvous and Docking Missions

NASA Technical Reports Server (NTRS)

1995-01-01

The NASA Advisory Council Task Force on the Shuttle-Mir rendezvous and docking missions examine a number of specific issues related to the Shuttle-Mir program. Three teams composed of Task Force members and technical advisors were formed to address the follow issues: preliminary results from STS-71 and the status of preparations for STS-74; NASA's presence in Russia; and NASA's automated data processing and telecommunications (ADP/T) infrastructure in Russia. The three review team reports have been included in the fifth report of the Task Force.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 11: The Voice of the User: How US Aerospace Engineers and Scientists View DoD Technical Reports

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Kennedy, John M.

1991-01-01

The project examines how the results of NASA/DOD research diffuse into the aerospace R&D process, and empirically analyzes the implications of the aerospace knowledge diffusion process. Specific issues considered are the roles played by government technical reports, the recognition of the value of scientific and technical information (STI), and the optimization of the STI aerospace transfer system. Information-seeking habits are assessed for the U.S. aerospace community, the general community, the academic sector, and the international community. U.S. aerospace engineers and scientists use 65 percent of working time to communicate STI, and prefer 'internal' STI over 'external' STI. The isolation from 'external' information is found to be detrimental to U.S. aerospace R&D in general.

Distributed photovoltaic systems: Utility interface issues and their present status

NASA Technical Reports Server (NTRS)

Hassan, M.; Klein, J.

1981-01-01

Major technical issues involving the integration of distributed photovoltaics (PV) into electric utility systems are defined and their impacts are described quantitatively. An extensive literature search, interviews, and analysis yielded information about the work in progress and highlighted problem areas in which additional work and research are needed. The findings from the literature search were used to determine whether satisfactory solutions to the problems exist or whether satisfactory approaches to a solution are underway. It was discovered that very few standards, specifications, or guidelines currently exist that will aid industry in integrating PV into the utility system. Specific areas of concern identified are: (1) protection, (2) stability, (3) system unbalance, (4) voltage regulation and reactive power requirements, (5) harmonics, (6) utility operations, (7) safety, (8) metering, and (9) distribution system planning and design.

Policy-Practice Gap in Participation of Students with Disabilities in the Education and Training Programme of Ethiopia: Policy Content Analysis

ERIC Educational Resources Information Center

Malle, Abebe Yehualawork; Pirttimaa, Raija; Saloviita, Timo

2015-01-01

This study explores the extent to which the issue of special educational and training needs for persons with disabilities is addressed in the education and training policy of Ethiopia, with a specific focus on technical and vocational education and training (TVET). Focus group discussions and interviews were used to assess the content of the…

Technical support for Life Sciences communities on a production grid infrastructure.

PubMed

Michel, Franck; Montagnat, Johan; Glatard, Tristan

2012-01-01

Production operation of large distributed computing infrastructures (DCI) still requires a lot of human intervention to reach acceptable quality of service. This may be achievable for scientific communities with solid IT support, but it remains a show-stopper for others. Some application execution environments are used to hide runtime technical issues from end users. But they mostly aim at fault-tolerance rather than incident resolution, and their operation still requires substantial manpower. A longer-term support activity is thus needed to ensure sustained quality of service for Virtual Organisations (VO). This paper describes how the biomed VO has addressed this challenge by setting up a technical support team. Its organisation, tooling, daily tasks, and procedures are described. Results are shown in terms of resource usage by end users, amount of reported incidents, and developed software tools. Based on our experience, we suggest ways to measure the impact of the technical support, perspectives to decrease its human cost and make it more community-specific.

Site systems engineering fiscal year 1999 multi-year work plan (MYWP) update for WBS 1.8.2.2

DOE Office of Scientific and Technical Information (OSTI.GOV)

GRYGIEL, M.L.

1998-10-08

Manage the Site Systems Engineering process to provide a traceable integrated requirements-driven, and technically defensible baseline. Through the Site Integration Group(SIG), Systems Engineering ensures integration of technical activities across all site projects. Systems Engineering's primary interfaces are with the RL Project Managers, the Project Direction Office and with the Project Major Subcontractors, as well as with the Site Planning organization. Systems Implementation: (1) Develops, maintains, and controls the site integrated technical baseline, ensures the Systems Engineering interfaces between projects are documented, and maintain the Site Environmental Management Specification. (2) Develops and uses dynamic simulation models for verification of the baselinemore » and analysis of alternatives. (3) Performs and documents fictional and requirements analyses. (4) Works with projects, technology management, and the SIG to identify and resolve technical issues. (5) Supports technical baseline information for the planning and budgeting of the Accelerated Cleanup Plan, Multi-Year Work Plans, Project Baseline Summaries as well as performance measure reporting. (6) Works with projects to ensure the quality of data in the technical baseline. (7) Develops, maintains and implements the site configuration management system.« less

Investigating Technical and Pedagogical Usability Issues of Collaborative Learning with Wikis

ERIC Educational Resources Information Center

Hadjerrouit, Said

2012-01-01

Wikis have been recently promoted as tools that foster collaborative learning. However, there has been little research devoted to the criteria that are suitable to address issues pertinent to collaborative learning. This paper proposes a set of criteria to explore technical and pedagogical usability issues of collaborative learning with wikis. The…

Specificity and Engagement: Increasing ELSI s Relevance to Nano Scientists

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shumpert, Barry L.; Wolfe, Amy K.; Bjornstad, David J.

Scholars studying the ethical, legal, and social issues (ELSI) associated with emerging technologies maintain the importance of considering these issues throughout the research and development cycle, even during the earliest stages of basic research. Embedding these considerations within the scientific process requires communication between ELSI scholars and the community of physical scientists who are conducting that basic research. We posit that this communication can be effective on a broad scale only if it links societal issues directly to characteristics of the emerging technology that are relevant to the physical and natural scientists involved in research and development. In this article,more » we examine nano-ELSI literature from 2003 to 2010 to discern the degree to which it makes these types of explicit connections. We find that, while the literature identifies a wide range of issues of societal concern, it generally does so in a non-specific manner. It neither links societal issues to particular forms or characteristics of widely divergent nanotechnologies nor to any of the many potential uses to which those nanotechnologies may be put. We believe that these kinds of specificity are essential to those engaged in nano-scale research. We also compare the literature-based findings to observations from interviews we conducted with nanoscientists and conclude that ELSI scholars should add technical- and application-related forms of specificity to their work and their writings to enhance effectiveness and impact in communicating with one important target audience members of the nanoscale science community.« less

PRA in Design: Increasing Confidence in Pre-Operational Assessments of Risks (Results of a Joint NASA/NRC Workshop)

NASA Technical Reports Server (NTRS)

Youngblood, Robert; Dezfuli, Homayoon; Siu, Nathan

2010-01-01

In late 2009, the National Aeronautics and Space Administration (NASA) and the U.S. Nuclear Regulatory Commission (NRC) jointly organized a workshop to discuss technical issues associated with application of risk assessments to early phases of system design. The workshop, which was coordinated by the Idaho National Laboratory, involved invited presentations from a number of PRA experts in the aerospace and nuclear fields and subsequent discussion to address the following questions: (a) What technical issues limit decision-makers' confidence in PRA results, especially at a pre-operational phase of the system life cycle? (b) What is being done to address these issues'? (c) What more can be done ? The workshop resulted in participant observations and suggestions on several technical issues, including the pursuit of non-traditional approaches to risk assessment and the verification and validation of risk models. The workshop participants also identified several important non-technical issues, including risk communication with decision makers, and the integration of PRA into the overall design process.

Space, our next frontier; Proceedings of the conference, Dallas, TX, June 7, 8, 1984

DOE Office of Scientific and Technical Information (OSTI.GOV)

Musgrave, G.

1985-01-01

The present conference on space development encompasses space commercialization, legislative, legal, and insurance-related factors in current space programs, political aspects of space militarization and governmental control, the military future uses of space and their consequences, command and control issues arising in space, economic influences on space policy, and recent developments in space solar power generation concepts. Attention is given to public opinion surveys concerning the scientific, military, and economic uses of space, the Leasecraft orbital industrial infrastructure concept, capitalism and democracy in space development, the current status of space law on commercialization topics, the nature of Ballistic Missile Defense, themore » Soviet Space threat, the High Frontier concept for space defense, lunar solar power systems, solar power satellites, and the utilization of lunar resources for the reduction of lunar base construction costs. Such specific technical issues as microgravity crystal growth and directional solidification, electrophoresis operations for pharmaceuticals, and technical barriers to commercial access to space, are also noted.« less

Situational Awareness Issues in the Implementation of Datalink: Shared Situational Awareness in the Joint Flight Deck-ATC Aviation System

NASA Technical Reports Server (NTRS)

Hansman, Robert John, Jr.

1999-01-01

MIT has investigated Situational Awareness issues relating to the implementation of Datalink in the Air Traffic Control environment for a number of years under this grant activity. This work has investigated: 1) The Effect of "Party Line" Information. 2) The Effect of Datalink-Enabled Automated Flight Management Systems (FMS) on Flight Crew Situational Awareness. 3) The Effect of Cockpit Display of Traffic Information (CDTI) on Situational Awareness During Close Parallel Approaches. 4) Analysis of Flight Path Management Functions in Current and Future ATM Environments. 5) Human Performance Models in Advanced ATC Automation: Flight Crew and Air Traffic Controllers. 6) CDTI of Datalink-Based Intent Information in Advanced ATC Environments. 7) Shared Situational Awareness between the Flight Deck and ATC in Datalink-Enabled Environments. 8) Analysis of Pilot and Controller Shared SA Requirements & Issues. 9) Development of Robust Scenario Generation and Distributed Simulation Techniques for Flight Deck ATC Simulation. 10) Methods of Testing Situation Awareness Using Testable Response Techniques. The work is detailed in specific technical reports that are listed in the following bibliography, and are attached as an appendix to the master final technical report.

Issues Concerning The Development Of A Mobile Platform For Health Care Applications

NASA Astrophysics Data System (ADS)

Korba, Larry W.; Liscano, Ramiro; Green, David; Durie, Nelson

1989-03-01

There are a number of problems that must yet be overcome before robotic technology can be applied in a hospital or a home care setting. The four basic problems are: cost, safety, finding appropriate applications and developing application specific solutions. Advanced robotics technology is now costly because of the complexity associated with autonomous systems. In any application, it is most important that the safety of the individuals using or exposed to the vehicle is ensured. Often in the health care field, innovative and useful new devices require an inordinate amount of time before they are accepted. The technical and ergonomic problems associated with any application must be solved so that cost containment, safety, ease of use, and quality of life are ensured. This paper discusses these issues in relation to our own development of an autonomous vehicle for health care applications. In this advancement, a commercially available platform is being equipped with an on-board, multiprocessor computer system and a variety of sensor systems. In order to develop pertinent solutions to the technical problems, there must be a framework wherein there is a focus upon the practical issues associated with the end application.

Development of noise emission measurement specifications for color printing multifunctional devices

NASA Astrophysics Data System (ADS)

Kimizuka, Ikuo

2005-09-01

Color printing (including copying) is becoming more popular application in home, as well as in offices. Existing de jule and/or industrial standards (such as ISO 7779, ECMA-74, ANSI S12.10 series, etc.), however, state only monochrome patterns, which are mainly intended for acoustic noise testing of mechanical impact type printers. This paper discusses the key issues and corresponding resolutions for development of color printing patterns for acoustic noise measurements. The results of these technical works will be published by JBMS-74 (new industry standard of JBMIA within 2005), and hopefully be the technical basis of updating other standards mentioned above. This paper also shows the development processes and key features of proposed patterns.

Engineering Forum Issue Paper: Online Hazardous Waste Cleanup Technical Resources

EPA Pesticide Factsheets

This issue paper is intended to give the reader examples of some online technical resources that can assist with hazardous waste cleanups in the Superfund, Resource Conservation and Recovery Act (RCRA), and Brownfields programs.

The 1996 General Assembly Session. A Summary of 1996 Higher Education-Related Legislation & Appropriations. Staff Technical Report No. 96-01.

ERIC Educational Resources Information Center

Virginia State Council of Higher Education, Richmond.

This is a summary of the 120 bills and resolutions related to higher education and passed by the 1996 session of the Virginia General Assembly. Bills address issues affecting all of Virginia higher education as well as those specifically affecting the Council of Higher Education. Brief summaries of each bill follow a listing of all the higher…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lundergan, C. D.; Mead, P. L.

This report is a compilation of 17 individual documents that together summarize the technical capabilities of Sandia Laboratories. Each document in this compilation contains details about a specific area of capability. Examples of application of the capability to research and development problems are provided. An eighteenth document summarizes the content of the other seventeen. Each of these documents was issued with a separate report number (SAND 74-0073A through SAND 74-0091, except -0078). (RWR)

Wireless Robotic Communications in Urban Environments: Issues for the Fire Service

DTIC Science & Technology

2008-03-01

affect signal propagation? Do some frequencies perform better than others in specific settings? • Radio Environment: How much impact might...of responders at each scenario, the radio frequency environment for each will be examined. Link budget calculations will be performed to assess...soldiers indicated that the main technical drawbacks were the narrow field of view, poor image quality, and limited radio range. The authors concluded

International boundary experiences by the United Nations

NASA Astrophysics Data System (ADS)

Kagawa, A.

2013-12-01

Over the last few decades, the United Nations (UN) has been approached by Security Council and Member States on international boundary issues. The United Nations regards the adequate delimitation and demarcation of international boundaries as a very important element for the maintenance of peace and security in fragile post-conflict situations, establishment of friendly relationships and cross-border cooperation between States. This paper will present the main principles and framework the United Nations applies to support the process of international boundary delimitation and demarcation activities. The United Nations is involved in international boundary issues following the principle of impartiality and neutrality and its role as mediator. Since international boundary issues are multi-faceted, a range of expertise is required and the United Nations Secretariat is in a good position to provide diverse expertise within the multiple departments. Expertise in different departments ranging from legal, political, technical, administrative and logistical are mobilised in different ways to provide support to Member States depending on their specific needs. This presentation aims to highlight some of the international boundary projects that the United Nations Cartographic Section has been involved in order to provide the technical support to different boundary requirements as each international boundary issue requires specific focus and attention whether it be in preparation, delimitation, demarcation or management. Increasingly, the United Nations is leveraging geospatial technology to facilitate boundary delimitation and demarcation process between Member States. Through the presentation of the various case studies ranging from Iraq - Kuwait, Israel - Lebanon (Blue Line), Eritrea - Ethiopia, Cyprus (Green Line), Cameroon - Nigeria, Sudan - South Sudan, it will illustrate how geospatial technology is increasingly used to carry out the support. In having applied a range of geospatial solutions, some of the good practices that have been applied in preceding projects, but there have been challenges and limitations faced. However, these challenges need to be seen as an opportunity to improve the geospatial technology solutions in future international boundary projects. This presentation will also share the aspirations that the United Nations Cartographic Section has in becoming a facilitator in geospatial technical aspects related to international boundary issues as we increasingly develop our geospatial institutional knowledge base and expertise. The presentation will conclude by emphasizing the need for more collaboration between different actors dealing with geospatial technology on borderland issues in order to meet the main goal of the United Nations - to live and work together as "We the Peoples of the United Nations".

Psychological issues relevant to astronaut selection for long-duration space flight: a review of the literature.

PubMed

Collins, Daniel L

2003-01-01

This technical paper reviews the current literature on psychological issues relevant to astronaut selection for long-duration space flights. Interpersonal problems have been and remain a recurring problem for both short and long-duration space flights. Even after completion of the space mission, intense psychological aftereffects are reported. The specific behavioral problems experienced during United States and Soviet Union space flights are reviewed, specifically addressing contentious episodes and impaired judgments that occurred during the Mercury, Apollo, and Skylab missions. Psychological tests used in the selection process for the space program have focused primarily on the detection of gross psychopathologies in potential candidates. Although these psychological instruments excluded some people from becoming astronauts, the battery of tests failed to predict which individuals would manifest behavioral aberrations in judgment, cooperative functioning, overt irritability, or destructive interpersonal actions.

Action learning across the decades.

PubMed

Eason, Ken

2017-05-02

Purpose The purpose of this paper is to explore how action learning concepts were used in two healthcare projects undertaken many decades apart. The specific purpose in both cases was to examine how action learning can contribute to shared learning across key stakeholders in a complex socio-technical system. In each case study, action learning supported joint design programmes and the sharing of perspectives about the complex system under investigation. Design/methodology/approach Two action learning projects are described: first, the Hospital Internal Communications (HIC) project led by Reg Revans in the 1960s. Senior staff in ten London hospitals formed action learning teams to address communication issues. Second, in the Better Outcomes for People with Learning Disabilities: Transforming Care (BOLDTC) project, videoconferencing equipment enabled people with learning disabilities to increase their opportunities to communicate. A mutual learning process was established to enable stakeholders to explore the potential of the technical system to improve individual care. Findings The HIC project demonstrated the importance of evidence being shared between team members and that action had to engage the larger healthcare system outside the hospital. The BOLDTC project confirmed the continuing relevance of action learning to healthcare today. Mutual learning was achieved between health and social care specialists and technologists. Originality/value This work draws together the socio-technical systems tradition (considering both social and technical issues in organisations) and action learning to demonstrate that complex systems development needs to be undertaken as a learning process in which action provides the fuel for learning and design.

On the practicality of emergency surgery during long-duration space missions.

PubMed

Dawson, David L

2008-07-01

While discussions of the practicality of surgery in space often focus on technical issues, such as adapting instrumentation and procedures for use in microgravity, programmatic issues need to be addressed if meaningful capabilities for emergency surgery are to be considered for human exploration missions beyond low Earth orbit. Advanced technologies that have been evaluated, including simulation-enhanced training, telementoring, or robotic assistance, might help prepare or augment a crew medical officer, but a physician with advanced training and relevant experience will be needed if surgical capabilities beyond basic emergency aid are to be considered. Specific operational roles for physician-astronauts should be established.

Overview of cancer vaccines

PubMed Central

Kudrin, Alex

2012-01-01

Cancer immunotherapy has seen a tremendous number of failures and only few recent regulatory successes. This is a review dedicated to determine major regulatory and developmental issues around cancer immunotherapeutics. A three pillar approach should be used in setting a development path: discovery platforms and sufficient pool of validated tumor antigens, product development strategy enabling to bring the product closer to the patient and clinical development strategy accounting for competitive landscape, treatment paradigm, technical and commercial risks. Regulatory framework existing around cancer vaccines in the EU, US, Japan and some developing countries is outlined. In addition, the review covers some specific issues on the design and conduct of clinical trials with cancer vaccines. PMID:22894970

Optimization of the convection volume in online post-dilution haemodiafiltration: practical and technical issues

PubMed Central

Chapdelaine, Isabelle; de Roij van Zuijdewijn, Camiel L.M.; Mostovaya, Ira M.; Lévesque, Renée; Davenport, Andrew; Blankestijn, Peter J.; Wanner, Christoph; Nubé, Menso J.; Grooteman, Muriel P.C.

2015-01-01

In post-dilution online haemodiafiltration (ol-HDF), a relationship has been demonstrated between the magnitude of the convection volume and survival. However, to achieve high convection volumes (>22 L per session) detailed notion of its determining factors is highly desirable. This manuscript summarizes practical problems and pitfalls that were encountered during the quest for high convection volumes. Specifically, it addresses issues such as type of vascular access, needles, blood flow rate, recirculation, filtration fraction, anticoagulation and dialysers. Finally, five of the main HDF systems in Europe are briefly described as far as HDF prescription and optimization of the convection volume is concerned. PMID:25815176

Technical Limitations in Merging Secular and Sacred Functions in Monumental Churches

NASA Astrophysics Data System (ADS)

Piatkowska, Ksenia

2017-10-01

The abandonment of churches and their adaptation for secular purposes is a current subject in Europe and worldwide. Most cases involve objects that were desacralized and then rebuilt as a whole object for alternative functions. Thus far, the merging of secular and sacred functions in one monumental Catholic church has not raised any issues. The paper describes the case of St. Catherine’s Church in Gdansk, Poland, where sacred function exists parallel to the new secular function being implemented. The study is based on the authentic, professional experience of the author. It describes the technical limitations arising from the need to ensure destinies for the optimal conditions of both sacred and secular function, while avoiding undesirable interference between them. The author further identifies architectural solutions most relevant to current requirements for protection of sacred zones in the church, for preservation of the monument, and for optimal function of a modern science museum. Significant design issues include: the inviolability of the sacred zone, preservation of the historical value of the monument, proper operation of new secular zones in compliance with contemporary standards of safety, performance of the assumed mission and profitability. The research indicates specific areas where the highest probability of collision exists between the sacred and profane and where technical problems are likely to occur.

Review of the transport of selected radionuclides in the interim risk assessment for the Radioactive Waste Management Complex, Waste Area Group 7 Operable Unit 7-13/14, Idaho National Engineering and Environmental Laboratory, Idaho

USGS Publications Warehouse

Rousseau, Joseph P.; Landa, Edward R.; Nimmo, John R.; Cecil, L. DeWayne; Knobel, LeRoy L.; Glynn, Pierre D.; Kwicklis, Edward M.; Curtis, Gary P.; Stollenwerk, Kenneth G.; Anderson, Steven R.; Bartholomay, Roy C.; Bossong, Clifford R.; Orr, Brennon R.

2005-01-01

The U.S. Department of Energy (DOE) requested that the U.S. Geological Survey conduct an independent technical review of the Interim Risk Assessment (IRA) and Contaminant Screening for the Waste Area Group 7 (WAG-7) Remedial Investigation, the draft Addendum to the Work Plan for Operable Unit 7-13/14 WAG-7 comprehensive Remedial Investigation and Feasibility Study (RI/FS), and supporting documents that were prepared by Lockheed Martin Idaho Technologies, Inc. The purpose of the technical review was to assess the data and geotechnical approaches that were used to estimate future risks associated with the release of the actinides americium, uranium, neptunium, and plutonium to the Snake River Plain aquifer from wastes buried in pits and trenches at the Subsurface Disposal Area (SDA). The SDA is located at the Radioactive Waste Management Complex in southeastern Idaho within the boundaries of the Idaho National Engineering and Environmental Laboratory. Radionuclides have been buried in pits and trenches at the SDA since 1957 and 1952, respectively. Burial of transuranic wastes was discontinued in 1982. The five specific tasks associated with this review were defined in a ?Proposed Scope of Work? prepared by the DOE, and a follow-up workshop held in June 1998. The specific tasks were (1) to review the radionuclide sampling data to determine how reliable and significant are the reported radionuclide detections and how reliable is the ongoing sampling program, (2) to assess the physical and chemical processes that logically can be invoked to explain true detections, (3) to determine if distribution coefficients that were used in the IRA are reliable and if they have been applied properly, (4) to determine if transport model predictions are technically sound, and (5) to identify issues needing resolution to determine technical adequacy of the risk assessment analysis, and what additional work is required to resolve those issues.

Survivability Enhancements for Military Communications Satellites

DTIC Science & Technology

1990-01-01

Communications Agency, Jan 1984. Townley , Ralph K., David W. Brown, Martin 0. Bernet, and Bernard L. Pankowski. "Selected Issues in DCS Integration...K. Townley , David W. Brown, Martin 0. Bernet, and Bernard L. Pankowski, "Selected Issues in DCS Technical Integration," Technical paper prepared by...34 Technical Note 11-82. Defense Communications Agency, Jan 1984. Townley , Ralph K., David W. Brown, Martin 0. Bernet, and Bernard L. Pankowski. "Selected

Theme: Trends and Issues Affecting the Future of Agricultural Education.

ERIC Educational Resources Information Center

Agricultural Education Magazine, 2000

2000-01-01

Articles discuss trends and issues in agricultural education, community and technical colleges, career/technical studies, Australian agriculture, agricultural science and technology programs in urban areas, genetic engineering, the impact of changing technologies on agricultural education, volunteers, and performance-based assessment. (JOW)

75 FR 61228 - Board Meeting: Technical Lessons Gained From High-Level Nuclear Waste Disposal Efforts

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-04

... NUCLEAR WASTE TECHNICAL REVIEW BOARD Board Meeting: Technical Lessons Gained From High-Level... Waste Policy Amendments Act of 1987, the U.S. Nuclear Waste Technical Review Board will meet in Dulles... of Energy on technical issues and to review the technical validity of DOE activities related to...

Natural Environments Definition for Design

NASA Technical Reports Server (NTRS)

Justh, H. L.; Altino, K. M.; Decker, R. K.; Koehler, H. M.; Leahy, F. B.; Minow, J. I.; Roberts, B. C.; Suggs, R. M.; Suggs, R. J.; White, P. W.;

Introduction-Pediatric epilepsy surgery techniques.

PubMed

Rydenhag, Bertil; Cukiert, Arthur

2017-04-01

This supplement includes the proceedings from the Pediatric Epilepsy Surgery Techniques Meeting held in Gothenburg (July 4-5, 2014), which focused on presentations and discussions regarding specific surgical technical issues in pediatric epilepsy surgery. Pediatric epilepsy neurosurgeons from all over the world were present and active in very fruitful and live presentations and discussions. These articles represent a synopsis of the areas and subjects dealt with there. Wiley Periodicals, Inc. © 2017 International League Against Epilepsy.

Seaworthy Quantum Key Distribution Design and Validation (SEAKEY)

DTIC Science & Technology

2016-05-26

shot noise limited performance for the homodyne receiver, which includes the stable CW local oscillator and balanced detector. TECHNICAL RESULTS...each piece of equipment that limited the performance of the receiver from achieving the shot noise limit. • Balanced detector: Thorlabs PDB450C o...Issue: This detector had specification for linearity to 5 mW of laser power on each detector of the pair. Upon calling the company, we were informed

The Presidential Address to the Association for Career and Technical Education Research: Using Standards to Reform Teacher Preparation in Career and Technical Education--A Successful Reformation

ERIC Educational Resources Information Center

Whittington, M. Susie

2005-01-01

This article presents the presidential address at the annual conference of the Association for Career and Technical Education Research by M. Susie Whittington, ACTER President 2005. The purpose of the presidential address is to examine a current issue facing the profession, and pose challenges to the membership in the context of that issue. In her…

Sandia Review of High Bridge Associates Report: Comparison of Plutonium Disposition Alternatives: WIPP Diluted Plutonium Storage and MOX Fuel Irradiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shoemaker, Paul E.; Hardin, Ernest; Park, HeeHo Daniel

The subject report from High Bridge Associates (HBA) was issued on March 2, 2016, in reaction to a U.S. Department of Energy (DOE) program decision to pursue down-blending of surplus Pu and geologic disposal at the Waste Isolation Pilot Plant (WIPP). Sandia National Laboratories was requested by the DOE to review the technical arguments presented in the HBA report. Specifically, this review is organized around three technical topics: criticality safety, radiological release limits, and thermal impacts. Questions raised by the report pertaining to legal and regulatory requirements, safeguards and security, international agreements, and costing of alternatives, are beyond the scopemore » of this review.« less

The non-technical skills used by anaesthetic technicians in critical incidents reported to the Australian Incident Monitoring System between 2002 and 2008.

PubMed

Rutherford, J S; Flin, R; Irwin, A

2015-07-01

The outcome of critical incidents in the operating theatre has been shown to be influenced by the behaviour of anaesthetic technicians (ATs) assisting anaesthetists, but the specific non-technical skills involved have not been described. We performed a review of critical incidents (n=1433) reported to the Australian Incident Monitoring System between 2002 and 2008 to identify which non-technical skills were used by ATs. The reports were assessed if they mentioned anaesthetic assistance or had the boxes ticked to identify "inadequate assistance" or "absent supervision or assistance". A total of 90 critical incidents involving ATs were retrieved, 69 of which described their use of non-technical skills. In 20 reports, the ATs ameliorated the critical incident, whilst in 46 they exacerbated the critical incident, and three cases had both positive and negative non-technical skills described. Situation awareness was identified in 39 reports, task management in 23, teamwork in 21 and decision-making in two, but there were no descriptions of issues related to leadership, stress or fatigue management. Situation awareness, task management and teamwork appear to be important non-technical skills for ATs in the development or management of critical incidents in the operating theatre. This analysis has been used to support the development of a non-technical skills taxonomy for anaesthetic assistants.

Drinking Water - National Drinking Water Clearinghouse

Science.gov Websites

relevant to drinking water issues. We provide free and low-cost publications, products, databases , referrals, and more. Free Technical Assistance Calls The NDWC can answer common questions involving issues system troubleshooting. Call our Engineers and technical assistance specialists toll-free at (304) 293

75 FR 68780 - Reliability Monitoring, Enforcement and Compliance Issues; Agenda for the Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-09

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD11-1-000] Reliability Monitoring, Enforcement and Compliance Issues; Agenda for the Technical Conference November 2, 2010. The... associated with reliability monitoring, enforcement and compliance. The Commission announced the conference...

AgRISTARS documents tracking list report

NASA Technical Reports Server (NTRS)

Hawkins, J. L.

1983-01-01

A quarterly listing of documents issued and placed in the AgRISTARS tracking system is provided. The technical publications are arranged by type of documents. The reference AgRISTARS document number, title and date of publication, the issuing organization, and the National Technical Information Service reference number is given.

ERCMExpress. Volume 1, Issue 1

ERIC Educational Resources Information Center

US Department of Education, 2005

2005-01-01

This is the inaugural issue of the Emergency Response and Crisis Management (ERCM) Technical Assistance Center's "ERCMExpress," and it focuses on the new technical assistance center. The center will support 243 grantees funded under the Emergency Response and Crisis Management program in managing and implementing their projects, and in sustaining…

Curriculum changes and moral issues in nursing education.

PubMed

Karseth, Berit

2004-11-01

Through history nursing education has strongly advocated the importance of educating students towards moral and ethical responsibility. In today's society however, it has become increasingly difficult to honour this concern. One peephole to capture the ongoing struggle is to look into the curriculum where different stakeholders voice different opinions. Following a social constructive perspective the curriculum texts represent specific interest among stakeholders related to nursing education in a certain historical periods. By analysing the two last versions of the curriculum we get an insight into moral and ethical issues at stake and different ways of addressing these questions. While moral and ethical issues in the curriculum of 1987 follow a disciplinary discourse emphasising the importance of learning ethical concepts and modes of arguments, the curriculum of 2000 places ethical and moral issues within an employability discourse. In this curriculum moral issues are seen as an obligation linked to students practical and technical skills. The 2000 curriculum represents a shift from emphasising the independent and reflective professional to underline the skillful and morally obliged practitioner.

Carrier testing for spinal muscular atrophy

PubMed Central

Gitlin, Jonathan M.; Fischbeck, Kenneth; Crawford, Thomas O.; Cwik, Valerie; Fleischman, Alan; Gonye, Karla; Heine, Deborah; Hobby, Kenneth; Kaufmann, Petra; Keiles, Steven; MacKenzie, Alex; Musci, Thomas; Prior, Thomas; Lloyd-Puryear, Michele; Sugarman, Elaine A.; Terry, Sharon F.; Urv, Tiina; Wang, Ching; Watson, Michael; Yaron, Yuval; Frosst, Phyllis; Howell, R. Rodney

2014-01-01

Spinal muscular atrophy is the most common fatal hereditary disease among newborns and infants. There is as yet no effective treatment. Although a carrier test is available, currently there is disagreement among professional medical societies who proffer standards of care as to whether or not carrier screening for spinal muscular atrophy should be offered as part of routine reproductive care. This leaves health care providers without clear guidance. In fall 2009, a meeting was held by National Institutes of Health to examine the scientific basis for spinal muscular atrophy carrier screening and to consider the issues that accompany such screening. In this article, the meeting participants summarize the discussions and conclude that pan-ethnic carrier screening for spinal muscular atrophy is technically feasible and that the specific study of implementing a spinal muscular atrophy carrier screening program raises broader issues about determining the scope and specifics of carrier screening in general. PMID:20808230

International Approaches for Nuclear Waste Disposal in Geological Formations: Geological Challenges in Radioactive Waste Isolation—Fifth Worldwide Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faybishenko, Boris; Birkholzer, Jens; Sassani, David

The overall objective of the Fifth Worldwide Review (WWR-5) is to document the current state-of-the-art of major developments in a number of nations throughout the World pursuing geological disposal programs, and to summarize challenging problems and experience that have been obtained in siting, preparing and reviewing cases for the operational and long-term safety of proposed and operating nuclear waste repositories. The scope of the Review is to address current specific technical issues and challenges in safety case development along with the interplay of technical feasibility, siting, engineering design issues, and operational and post-closure safety. In particular, the chapters included inmore » the report present the following types of information: the current status of the deep geological repository programs for high level nuclear waste and low- and intermediate level nuclear waste in each country, concepts of siting and radioactive waste and spent nuclear fuel management in different countries (with the emphasis of nuclear waste disposal under different climatic conditions and different geological formations), progress in repository site selection and site characterization, technology development, buffer/backfill materials studies and testing, support activities, programs, and projects, international cooperation, and future plans, as well as regulatory issues and transboundary problems.« less

77 FR 27490 - Plant-Specific Adoption, Revision 4 of the Improved Standard Technical Specifications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-10

...,'' NUREG-1432, ``Standard Technical Specifications, Combustion Engineering Plants,'' NUREG-1433, ``Standard..., ``Standard Technical Specifications, Combustion Engineering Plants'' Revision 4, ADAMS Accession No..., Westinghouse Plants''.. NUREG-1432, ``Standard Technical ML12102A165 ML12102A169 Specifications, Combustion...

International Approaches for Nuclear Waste Disposal in Geological Formations: Report on Fifth Worldwide Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faybishenko, Boris; Birkholzer, Jens; Persoff, Peter

2016-09-01

The goal of the Fifth Worldwide Review is to document evolution in the state-of-the-art of approaches for nuclear waste disposal in geological formations since the Fourth Worldwide Review that was released in 2006. The last ten years since the previous Worldwide Review has seen major developments in a number of nations throughout the world pursuing geological disposal programs, both in preparing and reviewing safety cases for the operational and long-term safety of proposed and operating repositories. The countries that are approaching implementation of geological disposal will increasingly focus on the feasibility of safely constructing and operating their repositories in short-more » and long terms on the basis existing regulations. The WWR-5 will also address a number of specific technical issues in safety case development along with the interplay among stakeholder concerns, technical feasibility, engineering design issues, and operational and post-closure safety. Preparation and publication of the Fifth Worldwide Review on nuclear waste disposal facilitates assessing the lessons learned and developing future cooperation between the countries. The Report provides scientific and technical experiences on preparing for and developing scientific and technical bases for nuclear waste disposal in deep geologic repositories in terms of requirements, societal expectations and the adequacy of cases for long-term repository safety. The Chapters include potential issues that may arise as repository programs mature, and identify techniques that demonstrate the safety cases and aid in promoting and gaining societal confidence. The report will also be used to exchange experience with other fields of industry and technology, in which concepts similar to the design and safety cases are applied, as well to facilitate the public perception and understanding of the safety of the disposal approaches relative to risks that may increase over long times frames in the absence of a successful implementation of final dispositioning.« less

NASA's UAS NAS Access Project

NASA Technical Reports Server (NTRS)

Johnson, Charles W.

2011-01-01

The vision of the Unmanned Aircraft System (UAS) Integration in the National Airspace System (NAS) Project is "A global transportation system which allows routine access for all classes of UAS." The goal of the UAS Integration in the NAS Project is to "contribute capabilities that reduce technical barriers related to the safety and operational challenges associated with enabling routine UAS access to the NAS." This goal will be accomplished through a two-phased approach based on development of system-level integration of key concepts, technologies and/or procedures, and demonstrations of integrated capabilities in an operationally relevant environment. Phase 1 will take place the first two years of the Project and Phase 2 will take place the following three years. The Phase 1 and 2 technical objectives are: Phase 1: Developing a gap analysis between current state of the art and the Next Generation Air Transportation System (NextGen) UAS Concept of Operations . Validating the key technical areas identified by this Project . Conducting initial modeling, simulation, and flight testing activities . Completing Sub-project Phase 1 deliverables (spectrum requirements, comparative analysis of certification methodologies, etc.) and continue Phase 2 preparation (infrastructure, tools, etc.) Phase 2: Providing regulators with a methodology for developing airworthiness requirements for UAS, and data to support development of certifications standards and regulatory guidance . Providing systems-level, integrated testing of concepts and/or capabilities that address barriers to routine access to the NAS. Through simulation and flight testing, address issues including separation assurance, communications requirements, and human systems integration in operationally relevant environments. The UAS in the NAS Project will demonstrate solutions in specific technology areas, which will address operational/safety issues related to UAS access to the NAS. Since the resource allocation for this Project is limited ($150M over the five years), the focus is on reducing the technical barriers where NASA has unique capabilities. As a result, technical areas, such as Sense and Avoid (SAA) and beyond line of sight command and control will not be addressed. While these are critical barriers to UAS access, currently, there is a great deal of global effort being exercised to address these challenge areas. Instead, specific technology development in areas where there is certainty that NASA can advance the research to high technology readiness levels will be the Project's focus. Specific sub-projects include Separation Assurance, Human Systems Integration, Communications, Certification, and Integrated Test and Evaluation. Each sub-project will transfer technologies to relevant key stakeholders and decision makers through research transition teams, technology forums, or through other analogous means.

Vulnerability assessment of a port and harbor community to earthquake and tsunami hazards: Integrating technical expert and stakeholder input

USGS Publications Warehouse

Wood, Nathan J.; Good, James W.; Goodwin, Robert F.

2002-01-01

Research suggests that the Pacific Northwest could experience catastrophic earthquakes and tsunamis in the near future, posing a significant threat to the numerous ports and harbors along the coast. A collaborative, multiagency initiative is underway to increase the resiliency of Pacific Northwest ports and harbors to these hazards, involving Oregon Sea Grant, Washington Sea Grant, the National Oceanic and Atmospheric Administration Coastal Services Center, and the U.S. Geological Survey Center for Science Policy. One element of this research, planning, and outreach initiative is a natural hazard mitigation and emergency preparedness planning process that combines technical expertise with local stakeholder values and perceptions. This paper summarizes and examines one component of the process, the vulnerability assessment methodology, used in the pilot port and harbor community of Yaquina River, Oregon, as a case study of assessing vulnerability at the local level. In this community, stakeholders were most concerned with potential life loss and other nonstructural vulnerability issues, such as inadequate hazard awareness, communication, and response logistics, rather than structural issues, such as damage to specific buildings or infrastructure.

NASA Patent Abstracts: A Continuing Bibliography. Supplement 54

NASA Technical Reports Server (NTRS)

1999-01-01

The NASA Patent Abstracts Bibliography is a semiannual NASA publication containing comprehensive abstracts of NASA owned inventions covered by U.S. patents and applications for patent. The citations included in the bibliography arrangement of citations were originally published in NASA's Scientific and Technical Aerospace Reports (STAR) and cover STAR announcements made since May 1969. The citations published in this issue cover the period June 1998 through December 1998. This issue includes 10 major subject divisions separated into 76 specific categories and one general category/division. Each entry consists of a STAR citation accompanied by an abstract and, when appropriate, a key illustration taken from the patent or application for patent. Entries are arranged by subject category in ascending order.

32 CFR 202.13 - Technical assistance for public participation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Reporting Requirements § 202.13 Technical assistance for public participation. Community members of a RAB or TRC may request technical assistance for interpreting scientific and engineering issues with regard to...

76 FR 52734 - Underwater Locating Devices (Acoustic) (Self-Powered)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-23

...This notice announces the planned revocation of all Technical Standard Order authorizations (TSOA) issued for the production of Underwater Locating Devices (Acoustic) (Self-Powered) manufactured to the TSO-C121 and TSO-C121a specifications. These actions are necessary because the planned issuance of TSO-C121b, Underwater Locating Devices (Acoustic) (Self-Powered), with a minimum performance standard (MPS) that will increase the minimum operating life of Underwater Locating Devices from 30 days to 90 days.

77 FR 13174 - Underwater Locating Devices (Acoustic) (Self-Powered)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

...This is a confirmation notice for the planned revocation of all Technical Standard Order authorizations issued for the production of Underwater Locating Devices (Acoustic) (Self-Powered) manufactured to the TSO-C121 and TSO-C121a specifications. These actions are necessary because the planned issuance of TSO-C121b, Underwater Locating Devices (Acoustic) (Self-Powered), minimum performance standard (MPS) will increase the minimum operating life of Underwater Locating Devices from 30 days to 90 days.

Light-Duty Diesel Vehicles: Efficiency and Emissions Attributes and Market Issues

EIA Publications

2009-01-01

This report responds to a request from Senator Jeff Sessions for an analysis of the environmental and energy efficiency attributes of light-duty diesel vehicles. Specifically, the inquiry asked for a comparison of the characteristics of diesel-fueled vehicles with those of similar gasoline-fueled, E85-fueled, and hybrid vehicles, as well as a discussion of any technical, economic, regulatory, or other obstacles to increasing the use of diesel-fueled vehicles in the United States

Commission 5: Documentation and Astronomical Data

NASA Astrophysics Data System (ADS)

Norris, Raymond P.; Ohishi, Masatoshi; Genova, Françoise; Grothkopf, Uta; Malkov, Oleg Yu.; Pence, William D.; Schmitz, Marion; Hanisch, Robert J.; Zhou, Xu

IAU Commission 5 deals with data management issues, and its working groups and task groups deal specifically with information handling, with data centres and networks, with technical aspects of collection, archiving, storage and dissemination of data, with designations and classification of astronomical objects, with library services, editorial policies, computer communications, ad hoc methodologies, and with various standards, reference frames, etc., FITS, astronomys Flexible Image Transport System, the major data exchange format, is controlled, maintained and updated by the Working Group FITS.

77 FR 46306 - Fluxapyroxad; Pesticide Tolerances Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-03

...; Pesticide Tolerances Technical Amendment AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule; technical amendment. SUMMARY: EPA issued a final rule in the Federal Register of May 14, 2012, concerning.... Inadvertently, the terminology for the oilseed crop group and for dried plums was incorrect. This technical...

Technical documentation challenges in aviation maintenance : a proceedings report.

DOT National Transportation Integrated Search

2012-11-01

The 2012 Technical Documentation workshop addressed both problems and solutions associated with technical : documentation for maintenance. These issues are known to cause errors, rework, maintenance delays, other : safety hazards, and FAA administrat...

76 FR 69296 - Proposed Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-08

... Adoption of Technical Specifications Task Force Traveler TSTF-500, Revision 2, ``DC Electrical Rewrite... Technical Specifications Task Force (TSTF) Traveler TSTF-500, Revision 2, ``DC Electrical Rewrite--Update to... Reactor Systems Engineer, Technical Specifications Branch, Mail Stop: O-7 C2A, Division of Inspection and...

78 FR 44104 - Notice of Intent To Issue a Funding Opportunity Announcement; Technical Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-23

... Funding Opportunity Announcement; Technical Assistance AGENCY: Federal Energy Management Program, Office.... This notice also is to inform Federal agencies of the availability of technical assistance in advance.... FOR FURTHER INFORMATION CONTACT: For requests for technical assistance regarding CHP, please contact...

48 CFR 952.242-70 - Technical direction.

Code of Federal Regulations, 2010 CFR

2010-10-01

... contract. (d) All technical direction shall be issued in writing by the COR. (e) The Contractor must... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technical direction. 952... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.242-70 Technical...

Towards the bibliography of life

PubMed Central

King, David; Morse, David R.; Willis, Alistair; Dil, Anton

2011-01-01

Abstract This paper discusses how we intend to take forward the vision of a Bibliography of Life in the ViBRANT project. The underlying principle of the Bibliography is to provide taxonomists and others with a freely accessible bibliography covering the whole of life. Such a bibliography has been achieved for specific study areas within taxonomy, but not for “life” as a whole. The creation of such a comprehensive tool has been hindered by various social and technical issues. The social concerns focus on the willingness of users to contribute to the Bibliography. The technical concerns relate to the architecture required to deliver the Bibliography. These issues are discussed in the paper and approaches to addressing them within the ViBRANT project are described, to demonstrate how we can now seriously consider building a Bibliography of Life. We are particularly interested in the potential of the resulting tool to improve the quality of bibliographic references. Through analysing the large number of references in the Bibliography we will be able to add metadata by resolving known issues such as geographical name variations. This should result in a tool that will assist taxonomists in two ways. Firstly, it will be easier for them to discover relevant literature, especially pre-digital literature; and secondly, it will be easier for them to identify the canonical form for a citation The paper also covers related issues relevant to building the tool in ViBRANT, including implementation and copyright, with suggestions as to how we could address them. PMID:22207811

[Health and the media in Spain].

PubMed

Revuelta, Gemma

2006-03-01

The so-called media agenda has a great influence on the issues considered to be important by society. In this article, based on the Informe Quiral (Quiral Survey), the author analyses the coverage of health issues in Spanish press. In Spain, media concentration causes a clear tendency to information homogeneity and thus, health issues are rarely dealt with in an independent way or in its own specific space or by specialized professionals. The main chronic issues the Spanish press has followed during the years included in the survey have been: cancer, sexuality and reproduction, aids, drugs (including tobacco), mental disorders and nutrition-related issues. Politicians or individuals with political and technical posts are the sources which carry the burden of informing about health issues (49%). On the other hand, the more specialized sector is the source of information in only 26% of the cases. In order to improve health information, the author suggests establishing communication platforms and closer collaboration between the specialized sector and the media, fostering mutual knowledge of all professional groups taking part in the process and ridding health information of all political influences.

Reformation of Regulatory Technical Standards for Nuclear Power Generation Equipments in Japan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mikio Kurihara; Masahiro Aoki; Yu Maruyama

2006-07-01

Comprehensive reformation of the regulatory system has been introduced in Japan in order to apply recent technical progress in a timely manner. 'The Technical Standards for Nuclear Power Generation Equipments', known as the Ordinance No.622) of the Ministry of International Trade and Industry, which is used for detailed design, construction and operating stage of Nuclear Power Plants, was being modified to performance specifications with the consensus codes and standards being used as prescriptive specifications, in order to facilitate prompt review of the Ordinance with response to technological innovation. The activities on modification were performed by the Nuclear and Industrial Safetymore » Agency (NISA), the regulatory body in Japan, with support of the Japan Nuclear Energy Safety Organization (JNES), a technical support organization. The revised Ordinance No.62 was issued on July 1, 2005 and is enforced from January 1 2006. During the period from the issuance to the enforcement, JNES carried out to prepare enforceable regulatory guide which complies with each provisions of the Ordinance No.62, and also made technical assessment to endorse the applicability of consensus codes and standards, in response to NISA's request. Some consensus codes and standards were re-assessed since they were already used in regulatory review of the construction plan submitted by licensee. Other consensus codes and standards were newly assessed for endorsement. In case that proper consensus code or standards were not prepared, details of regulatory requirements were described in the regulatory guide as immediate measures. At the same time, appropriate standards developing bodies were requested to prepare those consensus code or standards. Supplementary note which provides background information on the modification, applicable examples etc. was prepared for convenience to the users of the Ordinance No. 62. This paper shows the activities on modification and the results, following the NISA's presentation at ICONE-13 that introduced the framework of the performance specifications and the modification process of the Ordinance NO. 62. (authors)« less

75 FR 37722 - OMB Approvals Under the Paperwork Reduction Act; Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-30

... since its last update. B. Why is this Technical Amendment Issued as a Final Rule? The information... provisions since the last update of this table. The paperwork burden associated with these new provisions was... amendment updates the table that lists the Office of Management and Budget (OMB) control numbers issued...

Metric Conversion in the Construction Industries--Technical Issues and Status.

ERIC Educational Resources Information Center

Milton, Hans J.; Berry, Sandra A.

This Special Publication was prepared at the request of the Metric Symposium Planning Committee of the National Institute of Building Sciences (NIBS). It is intended to provide information on technical issues and status of metric conversion in the United States construction industries. It was made available to attendees at the NIBS Symposium on…

The Future of the National Technical Information Service: Issues and Options.

ERIC Educational Resources Information Center

McClure, Charles R.

In recent years there has been considerable debate about the appropriate role, management structure, and activities for the National Technical Information Service (NTIS). This background paper identifies key issues that require attention by Congress and by NTIS itself to increase the effectiveness of NTIS in the collection and dissemination of…

Vocational and Technical Education in Lebanon: Strategic Issues and Challenges

ERIC Educational Resources Information Center

Karam, Gebran

2006-01-01

The current status of the Lebanese vocational and technical education (VTE) system is assessed and the strategic issues and challenges facing it are identified. In addition to the economic and social challenges that are common to many developing countries, the Lebanese system suffers from idiosyncratic problems, which may require innovative and…

Education and Training. Annotated Bibliography. Author and Subject Index.

ERIC Educational Resources Information Center

United Nations Food and Agriculture Organization, Rome (Italy).

Food and Agriculture Organization (FAO) publications and documents issued by the Human Resources and Institutions division and by other technical divisions in the technical, economic, and social fields are selected, annotated and indexed in this bibliography. Documents issued prior to 1967 are not included but can be found in the Rural…

Peer Review of a Formal Verification/Design Proof Methodology

NASA Technical Reports Server (NTRS)

1983-01-01

The role of formal verification techniques in system validation was examined. The value and the state of the art of performance proving for fault-tolerant compuers were assessed. The investigation, development, and evaluation of performance proving tools were reviewed. The technical issues related to proof methodologies are examined. The technical issues discussed are summarized.

Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH) program

NASA Astrophysics Data System (ADS)

Fayette, Daniel F.; Speicher, Patricia; Stoklosa, Mark J.; Evans, Jillian V.; Evans, John W.; Gentile, Mike; Pagel, Chuck A.; Hakim, Edward

1993-08-01

A joint military-commercial effort to evaluate multichip module (MCM) structures is discussed. The program, Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH), has been designed to identify the failure mechanisms that are possible in MCM structures. The RELTECH test vehicles, technical assessment task, product evaluation plan, reliability modeling task, accelerated and environmental testing, and post-test physical analysis and failure analysis are described. The information obtained through RELTECH can be used to address standardization issues, through development of cost effective qualification and appropriate screening criteria, for inclusion into a commercial specification and the MIL-H-38534 general specification for hybrid microcircuits.

Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH) program

NASA Technical Reports Server (NTRS)

Fayette, Daniel F.; Speicher, Patricia; Stoklosa, Mark J.; Evans, Jillian V.; Evans, John W.; Gentile, Mike; Pagel, Chuck A.; Hakim, Edward

1993-01-01

A joint military-commercial effort to evaluate multichip module (MCM) structures is discussed. The program, Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH), has been designed to identify the failure mechanisms that are possible in MCM structures. The RELTECH test vehicles, technical assessment task, product evaluation plan, reliability modeling task, accelerated and environmental testing, and post-test physical analysis and failure analysis are described. The information obtained through RELTECH can be used to address standardization issues, through development of cost effective qualification and appropriate screening criteria, for inclusion into a commercial specification and the MIL-H-38534 general specification for hybrid microcircuits.

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2014 CFR

2014-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2013 CFR

2013-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2012 CFR

2012-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

Implementation of quality improvement techniques for management and technical processes in the ACRV project

NASA Technical Reports Server (NTRS)

Raiman, Laura B.

1992-01-01

Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

Implementation of quality improvement techniques for management and technical processes in the ACRV project

NASA Astrophysics Data System (ADS)

Raiman, Laura B.

1992-12-01

Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-13

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD13-6-000] Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory... related to the reliability of the Bulk-Power System. A more formal agenda will be issued at a later date...

Initiatives in Technical and Further Education. Numbers 3 and 4.

ERIC Educational Resources Information Center

National TAFE Clearinghouse, Adelaide (Australia).

These two issues contain abstracts of 127 and 118 documents, respectively, related to the field of technical and further education that are available through the Australian Technical and Further Education (TAFE) Clearinghouse system. These types of materials are included: research reports/technical reports, evaluation studies, curriculum materials…

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2010 CFR

2010-10-01

... directive whatever. (d) All technical directions must be issued in writing by the project officer or must be... advise the contractor in writing that, in the contracting officer's opinion, the technical direction is... subject to the technical direction of the NRC project officer. The term technical direction is defined to...

48 CFR 1552.237-71 - Technical direction.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... (d) Technical direction will be issued in writing or confirmed in writing within five (5) days after... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Technical direction. 1552... Technical direction. As prescribed in 1537.110, insert a clause substantially the same as the following...

76 FR 60029 - Notice of Issuance Technical Bulletin 2011-2, Extended Deferral of the Effective Date of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Notice of Issuance Technical Bulletin 2011-2, Extended Deferral of the Effective Date of Technical Bulletin 2006-1 AGENCY: Federal Accounting Standards Advisory... hereby given that the Federal Accounting Standards Advisory Board (FASAB) has issued Technical Bulletin...

Technical and Vocational Education in Nigeria: Issues, Challenges and a Way Forward

ERIC Educational Resources Information Center

Okoye, Reko; Arimonu, Maxwell Onyenwe

2016-01-01

Technical education, as enshrined in the Nigerian national policy on education, is concerned with qualitative technological human resources development directed towards a national pool of skilled and self reliant craftsmen, technicians and technologists in technical and vocational education fields. In Nigeria, the training of technical personnel…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The increasing scale-up of fast pyrolysis in North America and Europe, as well as the exploration and expansion of markets for the energy use of biocrude oils that now needs to take place, suggested that it was timely to convene an international meeting on the properties and combustion behavior of these oils. A common understanding of the state-of-the-art and technical and other challenges which need to be met during the commercialization of biocrude fuel use, can be achieved. The technical issues and understanding of combustion of these oils are rapidly being advanced through R&D in the United States, Canada, Europemore » and Scandinavia. It is obvious that for the maximum economic impact of biocrude, it will be necessary to have a common set of specifications so that oils can be used interchangeably with engines and combustors which require minimal modification to use these renewable fuels. Fundamental and applied studies being pursued in several countries are brought together in this workshop so that we can arrive at common strategies. In this way, both the science and the commercialization are advanced to the benefit of all, without detracting from the competitive development of both the technology and its applications. This United States-Canada-Finland collaboration has led to the two and one half day specialists meeting at which the technical basis for advances in biocrude development is discussed. The goal is to arrive at a common agenda on issues that cross national boundaries in this area. Examples of agenda items are combustion phenomena, the behavior of trace components . of the oil (N, alkali metals), the formation of NO{sub x}, in combustion, the need for common standards and environmental safety and health issues in the handling, storage and transportation of biocrudes.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milne, T.

The increasing scale-up of fast pyrolysis in North America and Europe, as well as the exploration and expansion of markets for the energy use of biocrude oils that now needs to take place, suggested that it was timely to convene an international meeting on the properties and combustion behavior of these oils. A common understanding of the state-of-the-art and technical and other challenges which need to be met during the commercialization of biocrude fuel use, can be achieved. The technical issues and understanding of combustion of these oils are rapidly being advanced through R&D in the United States. Canada, Europemore » and Scandinavia. It is obvious that for the maximum economic impact of biocrude, it will be necessary to have a common set of specifications so that oils can be used interchangeably with engines and combustors which require minimal modification to use these renewable fuels. Fundamental and applied studies being pursued in several countries are brought together in this workshop so that we can arrive at common strategies. In this way, both the science and the commercialization are advanced to the benefit of all, without detracting from the competitive development of both the technology and its applications. This United States-Canada-Finland collaboration has led to the two and one half day specialists meeting at which the technical basis for advances in biocrude development is discussed. The goal is to arrive at a common agenda on issues that cross national boundaries in this area. Examples of agenda items are combustion phenomena, the behavior of trace components of the oil (N, alkali metals), the formation of NOx in combustion, the need for common standards and environmental safety and health issues in the handling, storage and transportation of biocrudes.« less

Improved Management of the Technical Interfaces Between the Hanford Tank Farm Operator and the Hanford Waste Treatment Plant - 13383

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duncan, Garth M.; Saunders, Scott A.

2013-07-01

The Department of Energy (DOE) is constructing the Waste Treatment and Immobilization Plant (WTP) at the Hanford site in Washington to treat and immobilize approximately 114 million gallons of high level radioactive waste (after all retrievals are accomplished). In order for the WTP to be designed and operated successfully, close coordination between the WTP engineering, procurement, and construction contractor, Bechtel National, Inc. and the tank farms operating contractor (TOC), Washington River Protection Solutions, LLC, is necessary. To develop optimal solutions for DOE and for the treatment of the waste, it is important to deal with the fact that two differentmore » prime contractors, with somewhat differing contracts, are tasked with retrieving and delivering the waste and for treating and immobilizing that waste. The WTP and the TOC have over the years cooperated to manage the technical interface. To manage what is becoming a much more complicated interface as the WTP design progresses and new technical issues have been identified, an organizational change was made by WTP and TOC in November of 2011. This organizational change created a co-located integrated project team (IPT) to deal with mutual and interface issues. The Technical Organization within the One System IPT includes employees from both TOC and WTP. This team has worked on a variety of technical issues of mutual interest and concern. Technical issues currently being addressed include: - The waste acceptance criteria; - Waste feed delivery and the associated data quality objectives (DQO); - Evaluation of the effects of performing a riser cut on a single shell tank on WTP operations; - The disposition of secondary waste from both TOC and WTP; - The close coordination of the TOC double shell tank mixing and sampling program and the Large Scale Integrated Test (LSIT) program for pulse jet mixers at WTP along with the associated responses to the Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2010-2; - Development of a set of alternatives to the current baseline that involve aspects of direct feed, feed conditioning, and design changes. The One System Technical Organization has served WTP, TOC, and DOE well in managing and resolving issues at the interface. This paper describes the organizational structure used to improve the interface and several examples of technical interface issues that have been successfully addressed by the new organization. (authors)« less

Issues in training the female player

PubMed Central

Kirkendall, Donald T

2007-01-01

On the surface, the women's game appears to be similar to the men's game. On closer examination, there are subtle differences in the nature of how each gender plays the game, which are evident in the disparity between skills, tactics and fitness. The technical weaknesses of women include the first touch, dribbling, long passing and goal keeping. These skill limitations have dictated specific tactical approaches towards both attack and defence. Specific biological limitations inherent in the female player affect the pace and total work output in the women's game. Although it is unrealistic to expect the women's game to approach the work output of the men's game, specific training of skills and fitness will influence the tactical approach to the game. PMID:17504787

Ground Water Technical Considerations during the Five-Year Review Process

EPA Pesticide Factsheets

This issue paper has been developed to highlight technical considerations as well as technical resources available to Remedial Project Managers (RPMs) in conducting Five-Year Reviews (FYRs) at CERCLA1 sites with contaminated groundwater.

Iridium: failures & successes

NASA Astrophysics Data System (ADS)

Christensen, CarissaBryce; Beard, Suzette

2001-03-01

This paper will provide an overview of the Iridium business venture in terms of the challenges faced, the successes achieved, and the causes of the ultimate failure of the venture — bankruptcy and system de-orbit. The paper will address technical, business, and policy issues. The intent of the paper is to provide a balanced and accurate overview of the Iridium experience, to aid future decision-making by policy makers, the business community, and technical experts. Key topics will include the history of the program, the objectives and decision-making of Motorola, the market research and analysis conducted, partnering strategies and their impact, consumer equipment availability, and technical issues — target performance, performance achieved, technical accomplishments, and expected and unexpected technical challenges. The paper will use as sources trade media and business articles on the Iridium program, technical papers and conference presentations, Wall Street analyst's reports, and, where possible, interviews with participants and close observers.

SS AMERICAN EAGLE, O.N. 278327; Explosion in the Gulf of Mexico on 26 February 1984 and Subsequent Sinking on 27 February 1984 with Multiple Loss of Life

DTIC Science & Technology

1985-02-06

systems, tank washing machines, through the National Technical Information steam, venturi -type blowers, butterworth Service, Springfield, Virginia...serve aboard tank vessels of the need to ground cargo tank venti- lating blowers. This is particularly important with respect to portable venturi air...Guard issued a service-wide warning regarding the use of portable venturi a’r mover blowers or exhaust units in nongas free’atmospheres. Specifically

Blood Sampling and Preparation Procedures for Proteomic Biomarker Studies of Psychiatric Disorders.

PubMed

Guest, Paul C; Rahmoune, Hassan

2017-01-01

A major challenge in proteomic biomarker discovery and validation for psychiatric diseases is the inherent biological complexity underlying these conditions. There are also many technical issues which hinder this process such as the lack of standardization in sampling, processing and storage of bio-samples in preclinical and clinical settings. This chapter describes a reproducible procedure for sampling blood serum and plasma that is specifically designed for maximizing data quality output in two-dimensional gel electrophoresis, multiplex immunoassay and mass spectrometry profiling studies.

Letters to the Editor

NASA Astrophysics Data System (ADS)

1998-03-01

All the Letters to the Editor in this issue are in the same PostScript or PDF file. Contents Comment on `Magnetic and electric field strengths of high voltage power lines and household appliances' José Luis Giordano Dept. de Ciencia y Tecnología de Materiales y Fluidos, CPSI, Universidad de Zaragoza, Spain Twins paradox S R Carson Norton College, Malton, North Yorkshire, UK On alternative ways of finding the ratio of specific heats of gases Tomas Ficker Physics Department, Technical University of Brno, Czech Republic

On operator strategic behavior

NASA Technical Reports Server (NTRS)

Hancock, P. A.

1991-01-01

Deeper and more detailed knowledge as to how human operators such as pilots respond, singly and in groups, to demands on their performance which arise from technical systems will support the manipulation of such systems' design in order to accommodate the foibles of human behavior. Efforts to understand how self-autonomy impacts strategic behavior and such related issues as error generation/recognition/correction are still in their infancy. The present treatment offers both general and aviation-specific definitions of strategic behavior as precursors of prospective investigations.

Environmental control medical support team

NASA Technical Reports Server (NTRS)

Crump, William J.; Kilgore, Melvin V., Jr.

1988-01-01

The activities conducted in support of the Environmental Control and Life Support Team during December 7, 1987 through September 30, 1988 are summarized. The majority of the ongoing support has focused on the ECLSS area. Through a series of initial meetings with the ECLSS team and technical literature review, an initial list of critical topics was developed. Subtasks were then identified or additional related tasks received as action items from the ECLSS group meetings. Although most of the efforts focused on providing MSFC personnel with information regarding specific questions and problems related to ECLSS issues, other efforts regarding identifying an ECLSS Medical Support Team and constructing data bases of technical information were also initiated and completed. The specific tasks are as follows: (1) Provide support to the mechanical design and integration of test systems as related to microbiological concerns; (2) Assist with design of Human Subjects Test Protocols; (3) Interpretation and recommendations pertaining to air/water quality requirements; (4) Assist in determining the design specifications required as related to the Technical Demonstration Program; (5) Develop a data base of all microorganisms recovered from previous subsystem testing; (6) Estimates of health risk of individual microbes to test subjects; (7) Assist with setting limits for safety of test subjects; (8) Health monitoring of test subjects; (9) Assist in the preparation of test plans; (10) Assist in the development of a QA/QC program to assure the validity, accuracy and precision of the analyses; and (11) Assist in developing test plans required for future man in the loop testing.

Technical clarity in inter-agency negotiations: Lessons from four hydropower projects

USGS Publications Warehouse

Burkardt, Nina; Lamb, Berton Lee; Taylor, Jonathan G.; Waddle, Terry J.

1995-01-01

We investigated the effect of technical clarity on success in multi-party negotiations in the Federal Energy Regulatory Commission (FERC) licensing process. Technical clarity is the shared understanding of dimensions such as the geographic extent of the project, range of flows to be considered, important species and life stages, and variety of water uses considered. The results of four hydropower licensing consultations are reported. Key participants were interviewed to ascertain the level of technical clarity present during the consultations and the degree to which the consultations were successful. Technical clarity appears to be a prerequisite for successful outcomes. Factors that enhance technical clarity include simple project design, new rather than existing projects, precise definition of issues, a sense of urgency to reach agreement, a sense of fairness among participants, and consistency in participation. Negotiators should not neglect the critical pre-negotiation steps of defining technical issues and determining appropriate studies, deciding how to interpret studies, and agreeing on responses to study results.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program's function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned-standards integration system. The Program maintains a 'one stop-shop' Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, WIlliam W.

2003-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program s function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned - standards integration system. The Program maintains a "one stop-shop" Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

Utility interface issues for grid-connected photovoltaic systems

NASA Astrophysics Data System (ADS)

Chu, D.; Key, T.; Fitzer, J.

Photovoltaic (PV) balance-of-system research and development has focused on interconnection with the utility grid as the most promising future application for photovoltaic energy production. These sysems must be compatible with the existing utility grid to be accepted. Compatibility encompasses many technical, economic and institutional issues, from lineman safety to revenue metering and power quality. This paper reviews DOE/PV sponsored research for two of the technical interconnection issues: harmonic injection, and power factor control. Explanations and rationale behind these two issues will be reviewed, and the status of current research and plans for required future work will be presented.

75 FR 28610 - Draft EPA's Reanalysis of Key Issues Related to Dioxin Toxicity and Response to NAS Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-21

... SAB will convene an expert panel composed of scientists knowledgeable about technical issues related... consideration. Members of the public who wish to ensure that their technical comments are provided to the SAB... any written public comments that EPA receives in accordance with the detailed instructions provided...

21st Century Educators: Developing and Supporting Great Career and Technical Education Teachers. Special Issues Brief. Revised Edition

ERIC Educational Resources Information Center

Jacques, Catherine; Potemski, Amy

2014-01-01

This Special Issues Brief from the Center on Great Teachers and Leaders (GTL Center) offers insight into three human capital management policies that are critical for career and technical education (CTE) teachers: certification, performance evaluation, and professional development. CTE teachers are uniquely positioned to improve college and career…

INSTITUTE ON CRITICAL ISSUES IN VOCATIONAL AND TECHNICAL TEACHER EDUCATION IN SMALL COLLEGES AND UNIVERSITIES. CENTER SEMINAR AND CONFERENCE REPORT NO. 8.

ERIC Educational Resources Information Center

BELL, A.P.

THIRTY PARTICIPANTS INCLUDING TEACHER EDUCATORS AND ADMINISTRATORS ATTENDED A 2-WEEK TEACHER EDUCATION INSTITUTE DESIGNED TO CONSIDER CRITICAL ISSUES IN VOCATIONAL AND TECHNICAL EDUCATION AND THEIR IMPLICATIONS FOR PROGRAMS OF TEACHER PREPARATION IN SMALL COLLEGES AND UNIVERSITIES. THE PRESENTATIONS BY SPECIAL CONSULTANTS WERE--(1) "CRITICAL…

78 FR 32476 - Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-426...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-30

... Standard Technical Specification (STS): NUREG-1432, ``Standard Technical Specifications Combustion..., Washington, DC 20555- 0001. SUPPLEMENTARY INFORMATION: TSTF-426, Revision 5, is applicable to all Combustion...

LANDFILL GAS ENERGY UTILIZATION EXPERIENCE: DISCUSSION OF TECHNICAL AND NON-TECHNICAL ISSUES, SOLUTIONS, AND TRENDS

EPA Science Inventory

The report discusses technical and non-technical considerations associated with the development and operation of landfill gas to energy projects. Much of the report is based on interviews and site visits with the major developers and operators of the more than 110 projects in the...

Upstream/downstream: Issues in environmental ethics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scherer, D.

1991-01-01

Upstream/Downstream reminds us that there are four issues that are more or less distinctive to environmental ethics. First, and most distinctively, environmental issues involve the standing of nonhuman living things and systems. Thus, environmental politics is only partly a clash among the interest of the parties involved; it often involves actions on behalf of the existence rights of nonhuman life forms. Second, environmental ethics concern the intergenerational distribution of benefits more explicitly than do most other ethical issues, which brings out serious weaknesses in legal frameworks that rely on claims for damages. Third, the complexity and indirectness of many environmentalmore » impacts introduces a high degree of uncertainty and thus technical as well as ethical issues of prudent behavior. Specifically, where science may not fully reveal environmental risks, should development proceed; should analysis proceed if it is known to have a Pollyanna bias Fourth, insofar as environmental damage is typically done to common property, and thus its regulation is generally a matter for governmental regulation, the obligations of private actors to make sacrifices beyond what government requires is at issue - an issue that one would expect to be taken up at length in the other volumes.« less

Comparing Supply-Side Specifications in Models of Global Agriculture and the Food System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Sherman; van Meijl, Hans; Willenbockel, Dirk

This paper compares the theoretical specification of production and technical change across the partial equilibrium (PE) and computable general equilibrium (CGE) models of the global agricultural and food system included in the AgMIP model comparison study. The two modeling approaches have different theoretical underpinnings concerning the scope of economic activity they capture and how they represent technology and the behavior of supply and demand in markets. This paper focuses on their different specifications of technology and supply behavior, comparing their theoretical and empirical treatments. While the models differ widely in their specifications of technology, both within and between the PEmore » and CGE classes of models, we find that the theoretical responsiveness of supply to changes in prices can be similar, depending on parameter choices that define the behavior of supply functions over the domain of applicability defined by the common scenarios used in the AgMIP comparisons. In particular, we compare the theoretical specification of supply in CGE models with neoclassical production functions and PE models that focus on land and crop yields in agriculture. In practice, however, comparability of results given parameter choices is an empirical question, and the models differ in their sensitivity to variations in specification. To illustrate the issues, sensitivity analysis is done with one global CGE model, MAGNET, to indicate how the results vary with different specification of technical change, and how they compare with the results from PE models.« less

Ethical dilemmas related to predictions and warnings of impending natural disaster.

PubMed

Phua, Kai-Lit; Hue, J W

2013-01-01

Scientists and policy makers issuing predictions and warnings of impending natural disaster are faced with two major challenges, that is, failure to warn and issuing a false alarm. The consequences of failure to warn can be serious for society overall, for example, significant economic losses, heavy infrastructure and environmental damage, large number of human casualties, and social disruption. Failure to warn can also have serious for specific individuals, for example, legal proceedings against disaster research scientists, as in the L'Aquila earthquake affair. The consequences of false alarms may be less serious. Nevertheless, false alarms may violate the principle of nonmaleficence (do no harm), affect individual autonomy (eg, mandatory evacuations), and may result in the "cry wolf" effect. Other ethical issues associated with natural disasters include the promotion of global justice through international predisaster technical assistance and postdisaster aid. Social justice within a particular country is promoted through greater postdisaster aid allocation to the less privileged.

Legal and ethical issues in research.

PubMed

Yip, Camille; Han, Nian-Lin Reena; Sng, Ban Leong

2016-09-01

Legal and ethical issues form an important component of modern research, related to the subject and researcher. This article seeks to briefly review the various international guidelines and regulations that exist on issues related to informed consent, confidentiality, providing incentives and various forms of research misconduct. Relevant original publications (The Declaration of Helsinki, Belmont Report, Council for International Organisations of Medical Sciences/World Health Organisation International Guidelines for Biomedical Research Involving Human Subjects, World Association of Medical Editors Recommendations on Publication Ethics Policies, International Committee of Medical Journal Editors, CoSE White Paper, International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use-Good Clinical Practice) form the literature that are relevant to the ethical and legal aspects of conducting research that researchers should abide by when conducting translational and clinical research. Researchers should note the major international guidelines and regional differences in legislation. Hence, specific ethical advice should be sought at local Ethics Review Committees.

New research on women's low participation in science and technology

NASA Astrophysics Data System (ADS)

Stout, Jane

It is well known that women have historically been and continue to be grossly underrepresented in technical fields (i.e., the physical sciences, engineering, and computing). This presentation will address the following research questions: What dissuades women from entering into a technical career track, and what are women's experiences like within technical fields? At the same time, this presentation will acknowledge a shortcoming of decades of social science research and interventions designed to improve women's interest and persistence in technical fields: a narrow definition of ``women''. Given that the majority of women in colleges and universities (i.e., the typical sites of social science research) tend to be affluent and/or White, STEM education research that relies on convenience samples at colleges and universities paints a skewed picture of gender issues in technical fields. This presentation will showcase research findings that call into question conventional conceptions of gender disparities in technical fields. Specifically, the presentation will emphasize the importance of recognizing that women constitute more than their gender; women come from a diverse array of backgrounds, which no doubt play a role in the experience of being a woman in technical fields. By understanding the experiences of women from a broad array of demographics groups, the STEM education community can develop a corresponding set of strategies to recruit and retain women with diverse interests, experiences, and values (e.g., first generation versus second college students; women of different racial/ethnic backgrounds). The aim of this presentation is to promote social science research and interventions that acknowledge the nuanced experiences of diverse women in technical fields, in order to address the seemingly intractable problem of women's underrepresentation in technical fields. NSF DUE-1431112, NSF CNS-1246649.

Edwin I. Hatch nuclear plant implementation of improved technical specifications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mahler, S.R.; Pendry, D.

1994-12-31

Edwin I. Hatch nuclear plant consists of two General Electric boiling water reactor/4 units, with a common control room and a common refueling floor. In March 1993, Hatch began conversion of both units` technical specifications utilizing NUREG 1433. The technical specifications amendment request was submitted February 25, 1994. Issuance is scheduled for October 21, 1994, with implementation on March 15, 1994. The current unit-1 technical specifications are in the {open_quotes}custom{close_quotes} format, and the unit-2 technical specifications are in the old standard format. Hatch previously relocated the fire protection and radiological technical specifications requirements. The Hatch conversion will provide consistency betweenmore » the two units, to the extent practicable.« less

Environment, Safety and Health Self-Assessment Report Fiscal Year 2010

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Scott

2011-03-23

The Lawrence Berkeley National Laboratory (LBNL) Environment, Safety, and Health (ES&H) Self-Assessment Program was established to ensure that Integrated Safety Management (ISM) is implemented institutionally and by all divisions. The ES&H Self-Assessment Program, managed by the Office of Contractor Assurance (OCA), provides for an internal evaluation of all ES&H programs and systems at LBNL. The primary objective of the program is to ensure that work is conducted safely and with minimal negative impact to workers, the public, and the environment. Self-assessment follows the five core functions and guiding principles of ISM. Self-assessment is the mechanism used to promote the continuousmore » improvement of the Laboratory's ES&H programs. The process is described in the Environment, Safety, and Health Assurance Plan (PUB-5344) and is composed of three types of self-assessments: Division ES&H Self-Assessment, ES&H Technical Assurance Program Assessment, and Division ES&H Peer Review. The Division ES&H Self-Assessment Manual (PUB-3105) provides the framework by which divisions conduct formal ES&H self-assessments to systematically identify program deficiencies. Issue-specific assessments are designed and implemented by the divisions and focus on areas of interest to division management. They may be conducted by teams and involve advance planning to ensure that appropriate resources are available. The ES&H Technical Assurance Program Manual (PUB-913E) provides the framework for systematic reviews of ES&H programs and processes. The ES&H Technical Assurance Program Assessment is designed to evaluate whether ES&H programs and processes are compliant with guiding regulations, are effective, and are properly implemented by LBNL divisions. The Division ES&H Peer Review Manual provides the framework by which division ISM systems are evaluated and improved. Peer Reviews are conducted by teams under the direction of senior division management and focus on higher-level management issues. Peer Review teams are selected on the basis of members knowledge and experience in the issues of interest to the division director. LBNL periodically requests in-depth independent assessments of selected ES&H programs. Such assessments augment LBNL's established assessment processes and provide an objective view of ES&H program effectiveness. Institutional Findings, Observations, and Noteworthy Practices identified during independent assessments are specifically intended to help LBNL identify opportunities for program improvement. This report includes the results of the Division ES&H Self-Assessment, ES&H Technical Assurance Program Assessment, and Division ES&H Peer Review, respectively.« less

Prosperity game for the national electronics manufacturing initiative

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berman, M.; VanDevender, J.P.; Berry, I.

1995-05-01

Prosperity Games are an outgrowth and adaptation of move/countermove and seminar War Games. Prosperity Games are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education and research. These issues can be examined from a variety of perspectives ranging from a global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions in specific industries. All Prosperity Games are unique in that both the game format and the player contributions vary from game to game. This report documents the Prosperity Game conducted under the sponsorship of the Electronics Subcommittee of the Civilian Industrialmore » Technology Committee (under the National Science and Technology Council), and the Electronics Partnership Project. Players were drawn from the electronics industry, from government, national laboratories, and universities, and from Japan and Austria. The primary objectives of this game were: To connect the technical and non-technical (i.e., policy) issues that were developed in the roadmap-making endeavor of the National Electronics Manufacturing Initiative (NENI);to provide energy, enthusiasm and people to help the roadmap succeed; and to provide insight into high-leverage public and private investments. The deliberations and recommendations of these teams provide valuable insights as to the views of this diverse group of decision makers concerning policy changes, foreign competition, the robustness of strategic thinking and planning, and the development, delivery and commercialization of new technologies.« less

77 FR 39552 - Self-Regulatory Organizations; NASDAQ OMX BX, Inc.; Order Approving a Proposed Rule Change With...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

... Exchange or NASDAQ Execution Services To Cancel Orders When a Technical or Systems Issue Occurs and To... the authority of BX or NASDAQ Execution Services (``NES'') to cancel orders when a technical or... issue may occur at BX, NES, or a routing destination that causes BX or NES to cancel orders, if BX or...

[White House Conference on Aging, 1981. Research in Aging. Report and Executive Summary of the Technical Committee.

ERIC Educational Resources Information Center

Birren, James E.; And Others

This Technical Committee Report provides an overview and historical sketch of research in aging and proposes a need for new knowledge. An examination of key issues notes the difficulty in assigning priority to research topics, and identifies emerging issues of public concern including: (1) physical health (alcohol and drugs, falls and accidents,…

75 FR 35800 - Draft EPA's Reanalysis of Key Issues Related to Dioxin Toxicity and Response to NAS Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-23

... FR 28610). Written comments on the draft report were to be submitted to EPA by August 19, 2010 (a 90... review. The SAB will convene an expert panel composed of scientists knowledgeable about technical issues... for their consideration. Members of the public who wish to ensure that their technical comments are...

AgRISTARS documents tracking list report

NASA Technical Reports Server (NTRS)

Hawkins, J. L.

1982-01-01

A quarterly listing of those documents and related publications that have been issued and placed in the AgRISTARS tracking system is presented. The Tracking List Report provides a catalog, by project, of technical publications arranged by type of document and gives the reference AgRISTARS document numbers, title and date of publication, the issuing organization, and the National Technical Information Service reference number.

77 FR 28375 - Dixie Pipeline Company LLC; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

....1.0.\\1\\ The technical conference will address the issues raised by the protesters in the proceeding and the issues discussed by the Commission in P 19 of the April 27, 2012 order concerning the effect... conference on Wednesday, May 30, 2012, at 9:00 a.m. (EDT), in a room to be designated at the offices of the...

Solar energy/utility interface - The technical issues

NASA Astrophysics Data System (ADS)

Tabors, R. D.; White, D. C.

1982-01-01

The technical and economic factors affecting an interface between solar/wind power sources and utilities are examined. Photovoltaic, solar thermal, and wind powered systems are subject to stochastic local climatic variations and as such may require full back-up services from utilities, which are then in a position of having reserve generating power and power lines and equipment which are used only part time. The low reliability which has degraded some economies of scale formerly associated with large, centralized power plants, and the lowered rate of the increase in electricity usage is taken to commend the inclusion of power sources with a modular nature such as is available from solar derived electrical generation. Technical issues for maintaining the quality of grid power and also effectively metering purchased and supplied back-up power as part of a homeostatic system of energy control are discussed. It is concluded that economic considerations, rather than technical issues, bear the most difficulty in integrating solar technologies into the utility network.

1992

EPA Science Inventory

There are two classes of statistical issues: firm issues amenable to problem statement and technical resolution and soft issues that have qualitative dimensions and ideological implications. irm issues are easy: defining and stating the problem is much of the solution. he soft is...

Technical and Vocational Training.

ERIC Educational Resources Information Center

Vocational Training, 1993

1993-01-01

This issue focuses on the various forms that secondary technical and vocational education takes in different European Community Member States. "The Future for Skilled Workers" is an interview with Burkart Lutz, a German researcher. Other articles are as follows: "Contradictions in Technical and Vocational Education: The…

75 FR 33682 - Export Administration Regulations; Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-15

...-01] RIN 0694-AE93 Export Administration Regulations; Technical Amendments AGENCY: Bureau of Industry... Bureau of Industry and Security (BIS) makes a technical amendment to the Export Administration... review of final decisions and orders issued in BIS export control administrative enforcement proceedings...

The Impact of Biosampling Procedures on Molecular Data Interpretation*

PubMed Central

Sköld, Karl; Alm, Henrik; Scholz, Birger

2013-01-01

The separation between biological and technical variation without extensive use of technical replicates is often challenging, particularly in the context of different forms of protein and peptide modifications. Biosampling procedures in the research laboratory are easier to conduct within a shorter time frame and under controlled conditions as compared with clinical sampling, with the latter often having issues of reproducibility. But is the research laboratory biosampling really less variable? Biosampling introduces within minutes rapid tissue-specific changes in the cellular microenvironment, thus inducing a range of different pathways associated with cell survival. Biosampling involves hypoxia and, depending on the circumstances, hypothermia, circumstances for which there are evolutionarily conserved defense strategies in the range of species and also are relevant for the range of biomedical conditions. It remains unclear to what extent such adaptive processes are reflected in different biosampling procedures or how important they are for the definition of sample quality. Lately, an increasing number of comparative studies on different biosampling approaches, post-mortem effects and pre-sampling biological state, have investigated such immediate early biosampling effects. Commonalities between biosampling effects and a range of ischemia/reperfusion- and hypometabolism/anoxia-associated biological phenomena indicate that even small variations in post-sampling time intervals are likely to introduce a set of nonrandom and tissue-specific effects of experimental importance (both in vivo and in vitro). This review integrates the information provided by these comparative studies and discusses how an adaptive biological perspective in biosampling procedures may be relevant for sample quality issues. PMID:23382104

77 FR 53886 - February 2011 Southwest Cold Weather Event Follow-up Technical Conference; Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

... Southwest Cold Weather Event Follow-up Technical Conference; Notice of Technical Conference Take notice that... August 16, 2011 Report on Outages and Curtailments During the Southwest Cold Weather Event of February 1... severe cold weather issues that led to rolling blackouts affecting over 4 million customers and natural...

Using the WTO/TBT enquiry point to monitor tendencies in the regulation of environment, health, and safety issues affecting the chemical industry.

PubMed

Pio Borges Menezes, Rodrigo; Maria de Souza Antunes, Adelaide

2005-04-01

The growing importance of technical regulation affecting the use and sale of chemical products is a topic of interest not only for the chemical industry, but also for governments, nongovernmental organizations, consumers, and interested communities. The results of such regulation on behalf of the environment, health and safety of individuals, as well as its economic effects on industrial activity, are well understood in the United States and recently in the European Union. In less developed countries, however, the general level of public understanding of these issues is still minimal. It is common knowledge that the so-called "regulatory asymmetry" between countries at different levels of development contributes to the establishment of technical barriers to trade. Such asymmetries, however, also have other impacts: the displacement of polluting industrial sectors to countries which have less demanding regulations, the concentration of unsafe and harmful environmental conditions in certain parts of the globe, and the competitive disadvantage for industries located in countries where control is more rigid. This study analyses information on a wide range of technical regulations issued by World Trade Organization (WTO) members, and focuses on those regulations that affect the chemical industry. This information is available through the WTO Enquiry Points, organizations created in each country to administrate the Technical Barriers to Trade Agreement (TBT). This article consists of an analysis of 4,301 notifications of technical regulations by WTO member states in the 7-year period following the establishment of the WTO in 1995. Starting from this mass of information, 585 notifications that affect the circulation or use of chemical products were isolated. Of this group, 71% refer to only 15 countries. This group of notifications was further classified according to their motivation (the environment, health, safety), by the type of product affected (medications, fuels, hazardous products, etc.), by the type of country where it was established (developed, emerging or developing) and the existing conformity assessment mechanism (prohibition, licenses, certification, labeling, etc.). Beyond identifying tendencies in specific industrial sectors, the notifications studied here reach more than 100 chemical products, substances, preparations and other materials, which are subject to various levels of restrictions in different parts of the globe because of their composition or adverse reactions during their life cycles.

Certification Testing Approach for Propulsion System Design

NASA Technical Reports Server (NTRS)

Rodriguez, Henry; Popp, Chris

2005-01-01

The Certification of Propulsion Systems is costly and complex which involves development and qualification testing. The desire of the certification process is to assure all requirements can be demonstrated to be compliant. The purpose of this paper is to address the technical design concerns of certifying a system for flight. The authors of this paper have experience the lessons learned from supporting the Shuttle Program for Main Propulsion and On Orbit Propulsions Systems. They have collaborated design concerns for certifying propulsion systems. Presented are Pressurization, Tankage, Feed System and Combustion Instability concerns. Propulsion System Engineers are challenged with the dilemma for testing new systems to specific levels to reduce risk yet maintain budgetary targets. A methodical approach is presented to define the types of test suitable to address the technical issues for qualifying systems for retiring the risk levels.

How can sludge dewatering devices be assessed? Development of a new DSS and its application to real case studies.

PubMed

Bertanza, Giorgio; Papa, Matteo; Canato, Matteo; Collivignarelli, Maria Cristina; Pedrazzani, Roberta

2014-05-01

A key issue in biological Waste Water Treatment Plants (WWTPs) operation is represented by the sludge management. Mechanical dewatering is a crucial stage for sludge volume reduction; though, being a costly operation, its optimization is required. We developed an original experimental methodology to evaluate the technical (dewatering efficiency) and financial (total treatment costs) performance of dewatering devices, which might be used as a DSS (Decision Support System) for WWTP managers. This tool was then applied to two real case studies for comparing, respectively, three industrial size centrifuges, and two different operation modes of the same machine (fixed installation vs. outsourcing service). In both the cases, the best option was identified, based jointly on economic and (site-specific) technical evaluations. Copyright © 2014 Elsevier Ltd. All rights reserved.

Integrated Requirements Analysis and Technology Roadmaps

NASA Technical Reports Server (NTRS)

1997-01-01

In fiscal year 1997, Strategic Insight performed analytical studies for NASA's Highly Reusable Space Transportation (HRST) program, creating program documents which illuminated technical requirements and critical research opportunities. Studies were performed to structure and confirm HRST's evolving technical requirements, building on Marshall's Phase 1 work, which defined HRST system concepts, analytical tools and high-level issues for assessment in Phase 2. Specifically, Strategic Insight: (1) Performed a requirements analysis to update HRST: An Advanced Concepts Study, Study Guidelines, Version 2.0 of January 22, 1996; only minor changes were recommended for the given parameters of interest to concept designers; (2) Conducted mini-workshops during HRST Working Group meetings on April 14-15, 1997 and July 22-24, 1997; and (3) Created structures for technology road maps of candidate HRST concepts, both subsystem and end-to-end concepts, emerging from the 13 cooperative agreement projects.

Socio-technical Issues for Ubiquitous Information Society in 2010

NASA Astrophysics Data System (ADS)

Funabashi, Motohisa; Homma, Koichi; Sasaki, Toshiro; Sato, Yoshinori; Kido, Kunihiko; Fukumoto, Takashi; Yano, Koujin

Impact of the ubiquitous information technology on our society is so significant that directing technological development and preparing institutional apparatus are quite important and urgent. The present paper elaborates, with the efforts by both humanity and engineering disciplines, to find out the socio-technical issues of ubiquitous information society in 2010 by inspecting social implications of emerging technology as well as social expectations. In order to deliberate the issues, scenarios are developed that describes possible life in ubiquitous information society. The derived issues cover integrating information technology and human body, producing smart sharable environment, protecting individual rights, fostering new service business, and forming community.

Technical Assistance to Brownfields Communities

EPA Pesticide Factsheets

This notice announces the availability of funds and solicits proposals from eligible entities (including eligible non-profit organizations) to provide technical assistance to communities on brownfields issues.

40 CFR 35.4190 - How does my group identify a qualified technical advisor?

Code of Federal Regulations, 2011 CFR

2011-07-01

... issues or public health issues as those issues relate to hazardous substance/toxic waste issues, as... public health issues must have received his or her public health or related training at accredited... hazardous or toxic waste problems, relocation, redevelopment or public health issues, and communicating...

Bridging the Divide between Safety and Risk Management for your Project or Program

NASA Technical Reports Server (NTRS)

Lutomski, Mike

2005-01-01

This presentation will bridge the divide between these separate but overlapping disciplines and help explain how to use Risk Management as an effective management decision support tool that includes safety. Risk Management is an over arching communication tool used by management to prioritize and effectively mitigate potential problems before they concur. Risk Management encompasses every kind of potential problem that can occur on a program or project. Some of these are safety issues such as hazards that have a specific likelihood and consequence that need to be controlled and included to show an integrated picture of accepted) mitigated, and residual risk. Integrating safety and other assurance disciplines is paramount to accurately representing a program s or projects risk posture. Risk is made up of several components such as technical) cost, schedule, or supportability. Safety should also be a consideration for every risk. The safety component can also have an impact on the technical, cost, and schedule aspect of a given risk. The current formats used for communication of safety and risk issues are not consistent or integrated. The presentation will explore the history of these disciplines, current work to integrate them, and suggestions for integration for the future.

The real world and lunar base activation scenarios

NASA Technical Reports Server (NTRS)

Schmitt, Harrison H.

1992-01-01

A lunar base or a network of lunar bases may have highly desirable support functions in a national or international program to explore and settle Mars. In addition, He-3 exported from the Moon could be the basis for providing much of the energy needs of humankind in the twenty-first century. Both technical and managerial issues must be addressed when considering the establishment of a lunar base that can serve the needs of human civilization in space. Many of the technical issues become evident in the consideration of hypothetical scenarios for the activation of a network of lunar bases. Specific and realistic assumptions must be made about the conduct of various types of activities in addition to the general assumptions given above. These activities include landings, crew consumables, power production, crew selection, risk management, habitation, science station placement, base planning, science, agriculture, resource evaluation, readaptation, plant activation and test, storage module landings, resource transport module landings, integrated operations, maintenance, Base 2 activation, and management. The development of scenarios for the activation of a lunar base or network of bases will require close attention to the 'real world' of space operations. That world is defined by the natural environment, available technology, realistic objectives, and common sense.

Cape Blanco wind farm feasibility study

NASA Astrophysics Data System (ADS)

1987-11-01

The Cape Blanco Wind Farm (CBWF) Feasibility Study was undertaken as a prototype for determining the feasibility of proposals for wind energy projects at Northwest sites. It was intended to test for conditions under which wind generation of electricity could be commercially feasible, not by another abstract survey of alternative technologies, but rather through a site-specific, machine-specific analysis of one proposal. Some of the study findings would be most pertinent to the Cape Blanco site - local problems require local solutions. Other findings would be readily applicable to other sites and other machines, and study methodologies would be designed to be modified for appraisal of other proposals. This volume discusses environmental, economic, and technical issues of the Wind Farm.

Statistical Issues in Testing Conformance with the Quantitative Imaging Biomarker Alliance (QIBA) Profile Claims.

PubMed

Obuchowski, Nancy A; Buckler, Andrew; Kinahan, Paul; Chen-Mayer, Heather; Petrick, Nicholas; Barboriak, Daniel P; Bullen, Jennifer; Barnhart, Huiman; Sullivan, Daniel C

2016-04-01

A major initiative of the Quantitative Imaging Biomarker Alliance is to develop standards-based documents called "Profiles," which describe one or more technical performance claims for a given imaging modality. The term "actor" denotes any entity (device, software, or person) whose performance must meet certain specifications for the claim to be met. The objective of this paper is to present the statistical issues in testing actors' conformance with the specifications. In particular, we present the general rationale and interpretation of the claims, the minimum requirements for testing whether an actor achieves the performance requirements, the study designs used for testing conformity, and the statistical analysis plan. We use three examples to illustrate the process: apparent diffusion coefficient in solid tumors measured by MRI, change in Perc 15 as a biomarker for the progression of emphysema, and percent change in solid tumor volume by computed tomography as a biomarker for lung cancer progression. Copyright © 2016 The Association of University Radiologists. All rights reserved.

Commercial newsgathering from space

NASA Astrophysics Data System (ADS)

1987-05-01

This memorandum does not examine the feasibility of a specific satellite system or business plan, but rather, assesses whether current government policy is appropriate to accommodate both current activities and future developments of the use of satellite images to cover newsworthy events. The mediasat term refers to a concept of a satellite system and business organization that would routinely collect news and information for media use from space. Because the mediasat concept is, for the most part, undefined, the Office of Technology Assessment (OTA) was forced to make a series of assumptions regarding fundamental issues as cost, markets, technical capability, and utility of a mediasat. Although these assumptions are critical to OTA's conclusions, they are only best guesses, based on the advice of experts in the media and in the field of remote sensing. With regard to specific issues, such as the economic viability of a mediasat or its effect on national security and foreign policy, altering these underlying assumptions could dramatically alter the conclusions reached.

Multidisciplinary study on anthropogenic landslides in Nepal

NASA Astrophysics Data System (ADS)

Puglia, Christopher; Derron, Marc-Henri; Nicolet, Pierrick; Sudmeier-Rieux, Karen; Jaboyedoff, Michel; Devkota, Sanjay

2013-04-01

Nepal is a country in which shallow landslide is a frequent phenomenon. Monsoon is the main triggering factor but anthropogenic influence is often significant too. Indeed, many infrastructures, such as roads or water pipes, are not built in a rigorous way because of a lack of funds and knowledge. In the present study we examine the technical, social and economic issues of landslide management for two sites in Nepal. The first site is located in Sanusiruwari VDC (Sindhupalchock district, central Nepal) and the second one in Namadi VDC (Ramecchap district, central Nepal). Both sites are affected by landslides induced by the construction of hydropower plants. These landslides may threaten the viability of the hydropower plants. At both sites the problems are quite similar, but the first site project is a private one and the second one is a public one implemented by the United Nations Development Programme (UNDP). For both sites, bioengineering methods using Vetiver (Vetyveria zizanioides) plantations is the main stabilization measure. To follow the progression of both landslides, fieldwork observations were conducted before and after the 2012 rainy season, including photogrammetric and distancemeter acquisitions. Main issues were discussed with communities and stakeholders of the hydropower projects through interviews and participatory risk mapping. Main issues include: lack of communication between the project managers and communities leading to conflict and the lack of maintenance of the bio-engineering sites, leading to less effective Vetiver growth and slope stabilization. Comparing the landslide management (technical, social and economic) of the two projects allows to point out some specific issues within an integrated risk perspective.

Thermal overload protection for electric motors on safety-related motor-operated valves: Generic Issue II. E. 6. 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rothberg, O.

1988-06-01

NRC regulatory positions, as stated in Regulatory Guide 1.106, Revision 1, have been identified by the Office for Analysis and Evaluation of Operational Data (AEOD) as potential contributors to valve motor burnout. AEOD is particularly concerned about the allowed policy of bypassing thermal overload devices during normal or accident conditions. Regulatory Guide 1.106 favors compromising the function of thermal overload devices in favor of completing the safety-related action of valves. The purpose of this study was to determine if the guidance contained in Regulatory Guide 1.106 is appropriate and, if not, to recommend the necessary changes. This report describes thermalmore » overload devices commonly used to protect safety-related valve operator motors. The regulatory guidelines stated in Regulatory Guide 1.106 along with the limitations of thermal overload protection are discussed. Supplements and alternatives to thermal overload protection are also described. Findings and conclusions of several AEOD reports are discussed. Information obtained from the standard review plan, standard technical specifications, technical specifications from representative plants, and several papers are cited.« less

Security challenges in integration of a PHR-S into a standards based national EHR.

PubMed

Mense, Alexander; Hoheiser Pförtner, Franz; Sauermann, Stefan

2014-01-01

Health related data provided by patients themselves is expected to play a major role in future healthcare. Data from personal health devices, vaccination records, health diaries or observations of daily living, for instance, is stored in personal health records (PHR) which are maintained by personal health record systems (PHR-S). Combining this information with medical records provided by healthcare providers in electronic health records (EHR) is one of the next steps towards "personal care". Austria currently sets up a nationwide EHR system that incorporates all healthcare providers and is technically based on international standards (IHE, HL7, OASIS, ...). Looking at the expected potential of merging PHR and EHR data it is worth to analyse integration approaches. Although knowing that an integration requires the coordination of processes, information models and technical architectures, this paper specifically focuses on security issues by evaluating general security requirements for a PHR-S (based on HL7 PHR-S FM), comparing them with the information security specifications for the Austrian's national EHR (based on ISO/IES 27000 series) and identifying the main challenges as well as possible approaches.

Clinical proteomic biomarkers: relevant issues on study design & technical considerations in biomarker development

PubMed Central

2014-01-01

Biomarker research is continuously expanding in the field of clinical proteomics. A combination of different proteomic–based methodologies can be applied depending on the specific clinical context of use. Moreover, current advancements in proteomic analytical platforms are leading to an expansion of biomarker candidates that can be identified. Specifically, mass spectrometric techniques could provide highly valuable tools for biomarker research. Ideally, these advances could provide with biomarkers that are clinically applicable for disease diagnosis and/ or prognosis. Unfortunately, in general the biomarker candidates fail to be implemented in clinical decision making. To improve on this current situation, a well-defined study design has to be established driven by a clear clinical need, while several checkpoints between the different phases of discovery, verification and validation have to be passed in order to increase the probability of establishing valid biomarkers. In this review, we summarize the technical proteomic platforms that are available along the different stages in the biomarker discovery pipeline, exemplified by clinical applications in the field of bladder cancer biomarker research. PMID:24679154

Thermal Storage Applications Workshop. Volume 2: Contributed Papers

NASA Technical Reports Server (NTRS)

1979-01-01

The solar thermal and the thermal and thermochemical energy storage programs are described as well as the technology requirements for both external (electrical) and internal (thermal, chemical) modes for energy storage in solar power plants. Specific technical issues addressed include thermal storage criteria for solar power plants interfacing with utility systems; optimal dispatch of storage for solar plants in a conventional electric grid; thermal storage/temperature tradeoffs for solar total energy systems; the value of energy storage for direct-replacement solar thermal power plants; systems analysis of storage in specific solar thermal power applications; the value of seasonal storage of solar energy; criteria for selection of the thermal storage system for a 10 MW(2) solar power plant; and the need for specific requirements by storage system development teams.

NATIONAL RESPONSE TEAM TECHNICAL ASSISTANCE ...

EPA Pesticide Factsheets

This document provides technical information on a wide range of activities to aid in response to intentional release of anthrax in urban environments. It includes initial actions when a potential release is discovered, health and safety issues for responders, sampling and analysis methods, decontamination technologies, decontamination waste disposal, and communication with public. This document provides technical information on a wide range of activities to aid in response to intentional release of anthrax in urban environments. It includes initial actions when a potential release is discovered, health and safety issues for responders, sampling and analysis methods, decontamination technologies, decontamination waste disposal, and communication with public.

Providing Services to Virtual Patrons.

ERIC Educational Resources Information Center

Hulshof, Robert

1999-01-01

Discusses the types of services libraries need to support patrons who access the library via the Internet or e-mail. Highlights include issues in technical support; establishing policies and procedures; tools for technical support, including hardware and software; impacts of technical support on staff; and future possibilities. (LRW)

The importance of defining technical issues in interagency environmental negotiations

USGS Publications Warehouse

Lamb, B.L.; Burkardt, N.; Taylor, J.G.

2001-01-01

The role of technical clarity in successful multiparty negotiations was studied. Investigations involved in-depth interviews with the principal participants in six consultations conducted under the U.S. Federal Energy Regulatory Commission’s hydroelectric power project licensing procedures. Technical clarity was especially important in these cases because they concerned science-based questions. The principal issues in the six cases were fish passage, instream flow for fish habitat, and entrainment of fish in hydropower turbines. It was concluded that technical clarity was one of the most critical elements in resolving these conflicts. In the least successful negotiations, parties failed to address the basic values of the dispute before plunging into technical studies. The results of those studies usually highlighted the potential for negative outcomes and increased polarization between the participants. In the most successful negotiations, the various parties shared an understanding of each of their basic values. These shared understandings led to technical studies that cast the negotiation in a positive light and illuminated possible solutions.

ACE: A distributed system to manage large data archives

NASA Technical Reports Server (NTRS)

Daily, Mike I.; Allen, Frank W.

1993-01-01

Competitive pressures in the oil and gas industry are requiring a much tighter integration of technical data into E and P business processes. The development of new systems to accommodate this business need must comprehend the significant numbers of large, complex data objects which the industry generates. The life cycle of the data objects is a four phase progression from data acquisition, to data processing, through data interpretation, and ending finally with data archival. In order to implement a cost effect system which provides an efficient conversion from data to information and allows effective use of this information, an organization must consider the technical data management requirements in all four phases. A set of technical issues which may differ in each phase must be addressed to insure an overall successful development strategy. The technical issues include standardized data formats and media for data acquisition, data management during processing, plus networks, applications software, and GUI's for interpretation of the processed data. Mass storage hardware and software is required to provide cost effective storage and retrieval during the latter three stages as well as long term archival. Mobil Oil Corporation's Exploration and Producing Technical Center (MEPTEC) has addressed the technical and cost issues of designing, building, and implementing an Advanced Computing Environment (ACE) to support the petroleum E and P function, which is critical to the corporation's continued success. Mobile views ACE as a cost effective solution which can give Mobile a competitive edge as well as a viable technical solution.

Key issues and technical route of cyber physical distribution system

NASA Astrophysics Data System (ADS)

Zheng, P. X.; Chen, B.; Zheng, L. J.; Zhang, G. L.; Fan, Y. L.; Pei, T.

2017-01-01

Relying on the National High Technology Research and Development Program, this paper introduced the key issues in Cyber Physical Distribution System (CPDS), mainly includes: composite modelling method and interaction mechanism, system planning method, security defence technology, distributed control theory. Then on this basis, the corresponding technical route is proposed, and a more detailed research framework along with main schemes to be adopted is also presented.

76 FR 16785 - Meeting for Software Developers on the Technical Specifications for Common Formats for Patient...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-25

... Software Developers on the Technical Specifications for Common Formats for Patient Safety Data Collection... designed as an interactive forum where PSOs and software developers can provide input on these technical... updated event descriptions, forms, and technical specifications for software developers. As an update to...

Fitness for duty in the nuclear industry: Update of the technical issues 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

Durbin, N.; Grant, T.

The purpose of this report is to provide an update of information on the technical issues surrounding the creation, implementation, and maintenance of fitness-for-duty (FFD) policies and programs. It has been prepared as a resource for Nuclear Regulatory Commission (NRC) and nuclear power plant personnel who deal with FFD programs. It contains a general overview and update on the technical issues that the NRC considered prior to the publication of its original FFD rule and the revisions to that rule (presented in earlier NUREG/CRs). It also includes chapters that address issues about which there is growing concern and/or about whichmore » there have been substantial changes since NUREG/CR-5784 was published. Although this report is intended to support the NRC`s rule making on fitness for duty, the conclusions of the authors of this report are their own and do not necessarily represent the opinions of the NRC.« less

75 FR 35021 - Reliability Standards Development and NERC and Regional Entity Enforcement; Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... Standards Development and NERC and Regional Entity Enforcement; Notice of Technical Conference June 15, 2010... Technical Conference to address industry perspectives on certain issues pertaining to the development and... Electric Reliability Organization's (ERO) standards development process; communication and interactions...

26 CFR 301.6110-2 - Meaning of terms.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... A “technical advice memorandum” is a written statement issued by the National Office to, and adopted... Internal Revenue Service in a written determination, including, with respect to a technical advice... technical advice memorandum, a “person to whom a written determination pertains” is the taxpayer whose...

Overlapping topics in advisory reports issued by five well-established European National Immunization Technical Advisory Groups from 2011 to 2014.

PubMed

Nijsten, Daniëlle; Houweling, Hans; Durupt, Antoine; Adjagba, Alex

2016-12-07

National Immunization Technical Advisory Groups (NITAGs) are facing increasingly complex vaccination issues together with a lack of human resources for evidence assessment and data analysis. One way to reduce these burdens could be to share some of the preparatory work across NITAGs. We conducted an inventory of all the advisory reports issued by five well-established European NITAGs from 2011 to 2014 to assess overlaps in issues and activities. A total of 104 advisory reports were retrieved. Advisory reports on the same issues were compared to identify overlapping activities and processes. Advisory reports issued by the five NITAGs showed little overlap in issues and processes. A first step towards efficient collaboration would be to establish an independent platform to provide insight into each NITAG's work and to facilitate the exchange of agendas, assessment frameworks and evidence. Copyright © 2016 Elsevier Ltd. All rights reserved.

32 CFR 202.13 - Technical assistance for public participation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... TRC may request technical assistance for interpreting scientific and engineering issues with regard to the nature of environmental hazards at the installation and environmental restoration activities...

Technical Assistance To Tribal Communities Addressing Brownfields

EPA Pesticide Factsheets

This notice announces the availability of funds and solicits proposals from eligible entities (including eligible nonprofit organizations) to provide technical assistance to tribal communities on brownfield related issues.

Education in Soil Science: the Italian approach

NASA Astrophysics Data System (ADS)

Benedetti, Anna; Canfora, Loredana; Dazzi, Carmelo; Lo Papa, Giuseppe

2017-04-01

The Italian Society of Soil Science (SISS) was founded in Florence on February 18th, 1952. It is an association legally acknowledged by Decree of the President of the Italian Republic in February 1957. The Society is member of the International Union of Soil Sciences (IUSS) of the European Confederation of Soil Science Societies (ECSSS) and collaborates with several companies, institutions and organizations having similar objectives or policy aspects. SISS promotes progress, coordination and dissemination of soil science and its applications encouraging relationships and collaborations among soil lovers. Within the SISS there are Working Groups and Technical Committees for specific issues of interest. In particular: • the Working Group on Pedotechniques; • the Working Group on Hydromorphic and Subaqueous Soils and • the Technical Committee for Soil Education and Public Awareness. In this communication we wish to stress the activities developed since its foundation by SISS to spread soil awareness and education in Italy through this last Technical Committee, focusing also the aspect concerning grants for young graduates and PhD graduates to stimulate the involvement of young people in the field of soil science. Keywords: SISS, soil education and awareness.

International Conference on Harmonisation; guidance on the M4 Common Technical Document--Quality: Questions and Answers/Location Issues; availability. Notice.

PubMed

2004-06-09

The Food and Drug Administration (FDA) is announcing the availability of a guidance entitled "M4: The CTD--Quality: Questions and Answers/Location Issues." The guidance was prepared under the auspices of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH). This guidance provides further clarification for preparing the quality components of an application file in the common technical document (CTD) format. The guidance addresses the relationship between linked sections for certain parameters (such as polymorphism and particle size), and it addresses location issues (by indicating the section in which to place requested information). The guidance is intended to ease the preparation of paper and electronic submissions, facilitate regulatory reviews, and simplify the exchange of regulatory information among regulatory authorities.

National GAP Conference 2007-Discussion Groups Report

USGS Publications Warehouse

Ratz, Joan M.; Lamb, Berton Lee

2010-01-01

We led two discussion groups during the 2007 National GAP Conference. These discussion groups provided information to help develop a survey of National Gap Analysis Program (GAP) data users. One group discussed technical issues, and the second group discussed the use of GAP data for decisionmaking. Themes emerging from the technical issues group included concerns about data quality, need for information on how to use data, and passive data distribution. The decisionmaking discussion included a wide range of topics including the need to understand presentation of information, the need to connect with and understand users of data, the revision of GAP's mission, and the adaptability of products and data. The decisionmaking group also raised concerns regarding technical issues. One conclusion is that a deep commitment to ongoing information transfer and support is a key component of success for the GAP program.

77 FR 27814 - Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-11

... NUCLEAR REGULATORY COMMISSION [Project No. 753; NRC-2012-0019] Model Safety Evaluation for Plant... Regulatory Commission (NRC) is announcing the availability of the model safety evaluation (SE) for plant... the Improved Standard Technical Specification (ISTS), NUREG-1431, ``Standard Technical Specifications...

45 CFR 162.920 - Availability of implementation specifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... implementation specifications and the Technical Reports Type 3 described in subparts I through S of this part... implementation specifications, which include the Technical Reports Type 3 described in this section, for... part 51. The implementation specifications and Technical Reports Type 3 described in this section are...

The semantic architecture of the World-Wide Molecular Matrix (WWMM)

PubMed Central

2011-01-01

The World-Wide Molecular Matrix (WWMM) is a ten year project to create a peer-to-peer (P2P) system for the publication and collection of chemical objects, including over 250, 000 molecules. It has now been instantiated in a number of repositories which include data encoded in Chemical Markup Language (CML) and linked by URIs and RDF. The technical specification and implementation is now complete. We discuss the types of architecture required to implement nodes in the WWMM and consider the social issues involved in adoption. PMID:21999475

Simple Automatic File Exchange (SAFE) to Support Low-Cost Spacecraft Operation via the Internet

NASA Technical Reports Server (NTRS)

Baker, Paul; Repaci, Max; Sames, David

1998-01-01

Various issues associated with Simple Automatic File Exchange (SAFE) are presented in viewgraph form. Specific topics include: 1) Packet telemetry, Internet IP networks and cost reduction; 2) Basic functions and technical features of SAFE; 3) Project goals, including low-cost satellite transmission to data centers to be distributed via an Internet; 4) Operations with a replicated file protocol; 5) File exchange operation; 6) Ground stations as gateways; 7) Lessons learned from demonstrations and tests with SAFE; and 8) Feedback and future initiatives.

Commission 5: Documentation and Astronomical Data

NASA Astrophysics Data System (ADS)

Ohishi, Masatoshi; Hanisch, Robert J.; Norris, Ray P.; Andernach, Heinz; Bishop, Marsha; Griffin, Elizabeth; Kembhavi, Ajit; Murphy, Tara; Pasian, Fabio

2012-04-01

IAU Commission 5 (http://www.nao.ac.jp/IAU/Com5/) deals with data management issues, and its working groups and task group deal specifically with information handling, with data centers and networks, with technical aspects of collection, archiving, storage and dissemination of data, with designations and classification of astronomical objects, with library services, editorial policies, computer communications, ad hoc methodologies, and with various standards, reference frames, etc. FITS (Flexible Image Transport System), the major data exchange format in astronomy, has been standardized, maintained and updated by the FITS working group under Commission 5.

The semantic architecture of the World-Wide Molecular Matrix (WWMM).

PubMed

Murray-Rust, Peter; Adams, Sam E; Downing, Jim; Townsend, Joe A; Zhang, Yong

2011-10-14

The World-Wide Molecular Matrix (WWMM) is a ten year project to create a peer-to-peer (P2P) system for the publication and collection of chemical objects, including over 250, 000 molecules. It has now been instantiated in a number of repositories which include data encoded in Chemical Markup Language (CML) and linked by URIs and RDF. The technical specification and implementation is now complete. We discuss the types of architecture required to implement nodes in the WWMM and consider the social issues involved in adoption.

NASP X-30 Propulsion technology status

NASA Technical Reports Server (NTRS)

Powell, William E.

1992-01-01

The performance goals of the NASP program require an aero-propulsion system with a high effective specific impulse. In order to achieve these goals, the high potential performance of air-breathing engines must be achieved over a very wide Mach number operating range. This, in turn, demands high component performance and involves many important technical issues which must be resolved. Scramjet Propulsion Technology is divided into five major areas: (1) inlets, (2) combustors, (3) nozzles, (4) component integration, and (5) test facilities. A status report covering the five areas is presented.

US-RERTR Advanced Fuel Development Plans : 1999.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, M. K.

1998-10-22

Twelve fuel alloys were included in the very-high-density RERTR-1 and RERTR-2 microplate irradiation experiments. Experience gained during fabrication and results from the post-irradiation examination of these fuels has allowed us to narrow the focus of our fuel development efforts in preparation for the next set of irradiation experiments. Specific technical problems in both the areas of fuel fabrication and irradiation performance remain to be addressed. Examples of these are powder fabrication, fuel phase gamma stability versus density, and fuel-matrix interaction. In order to more efficiently address metal alloy fuel performance issues, work will continue on establishing a theoretical basis formore » alloy stability and metal alloy dispersion fuel irradiation performance. Plans to address these fuel development issues in the coming year will be presented.« less

Space station systems technology study (add-on task). Volume 2: Trade study and technology selection

NASA Technical Reports Server (NTRS)

1985-01-01

The current Space Station Systems Technology Study add on task was an outgrowth of the Advanced Platform Systems Technology Study (APSTS) that was completed in April 1983 and the subsequent Space Station System Technology Study completed in April 1984. The first APSTS proceeded from the identification of 106 technology topics to the selection of five for detailed trade studies. During the advanced platform study, the technical issues and options were evaluated through detailed trade processes, individual consideration was given to costs and benefits for the technologies identified for advancement, and advancement plans were developed. An approach similar to that was used in the subsequent study, with emphasis on system definition in four specific technology areas to facilitate a more in depth analysis of technology issues.

Centralized vs decentralized options for an European Data Relay Satellite system

NASA Astrophysics Data System (ADS)

Saint Aubert, S.; Hervieux, M.; Perbos, J. L.; Saggese, E.; Soprano, C.

1985-10-01

The European Data Relay Satellite (DRS) is now being planned to support future European missions in the nineties and in particular the various elements of the in-orbit infrastructure. Studies are being conducted to investigate the usefulness of the relay system as well as to provide the basis for issuing technical specifications for a development and launch in 1993. This paper presents the results of a study issued by ESA on possible options for a DRS System, concentrating on the comparison between a centralized and a decentralized data distribution concept. After recalling the space programs foreseen in Europe, the paper discusses the architecture and design of the various elements of the System: space segment, DRS ground segment, and user ground segment for different options of data dissemination.

Centralized vs decentralized options for a european data relay satellite system

NASA Astrophysics Data System (ADS)

Aubert, Ph. Saint; Hervieux, M.; Perbos, J. L.; Saggese, E.; Soprano, C.

The European Data Relay Satellite (DRS) is now being planned to support future European missions in the nineties and in particular the various elements of the in-orbit infrastructure. Studies are being conducted to investigate the usefulness of the Relay System as well as to provide the basis for issuing technical specifications for a development and launch in 1993. This paper presents the results of a study issued by ESA on possible options for a DRS System, concentrating on the comparison between a centralized and a decentralized data distribution concept. After recalling the space programmes foreseen in Europe, the paper discusses the architecture and design of the various elements of the System: space segment, DRS ground segment and user ground segment for different options of data dissemination.

Bench-Scale Filtration Testing in Support of the Pretreatment Engineering Platform (PEP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Billing, Justin M.; Daniel, Richard C.; Kurath, Dean E.

Pacific Northwest National Laboratory (PNNL) has been tasked by Bechtel National Inc. (BNI) on the River Protection Project-Hanford Tank Waste Treatment and Immobilization Plant (RPP-WTP) project to perform research and development activities to resolve technical issues identified for the Pretreatment Facility (PTF). The Pretreatment Engineering Platform (PEP) was designed, constructed and operated as part of a plan to respond to issue M12, “Undemonstrated Leaching Processes.” The PEP is a 1/4.5-scale test platform designed to simulate the WTP pretreatment caustic leaching, oxidative leaching, ultrafiltration solids concentration, and slurry washing processes. The PEP testing program specifies that bench-scale testing is to bemore » performed in support of specific operations, including filtration, caustic leaching, and oxidative leaching.« less

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

75 FR 39244 - Reliability Standards Development and NERC and Regional Entity Enforcement; Further Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-08

... Standards Development and NERC and Regional Entity Enforcement; Further Notice Concerning Technical... convene a Commissioner-led technical conference regarding issues pertaining to the development of... Corporation and the Regional Entities as previously announced.\\1\\ \\1\\ Notice of Technical Conference, 75 FR 35...

Impact of Automation on Technical Services.

ERIC Educational Resources Information Center

Rooks, Dana C.; Thompson, Linda L.

1988-01-01

Discusses the impact of automation on library technical services, and the need for library managers to be aware of the issues involved and to plan for future developments. The discussion focuses on the areas of job related concerns of technical staff, organizational structures, recruitment and training, and ergonomic considerations. (CLB)

78 FR 72673 - Midcontinent Independent System Operator, Inc.; Supplemental Notice Concerning Post-Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER13-2124-000] Midcontinent Independent System Operator, Inc.; Supplemental Notice Concerning Post-Technical Conference Comments As announced in the Notice of Technical Conference issued on October 25, 2013, and as required in the...

A Decision Support Tool to Evaluate Sources and Sinks of Nitrogen within a Watershed Framework

EPA Science Inventory

Human transformation of the nitrogen (N) cycle is causing a number of environmental and human health problems. Federal, state and local authorities focusing on management of N loadings face both technical and non-technical challenges. One technical issue is that we need a bette...

Trends in Career and Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Asunda, Paul; Kim, Soo Jung

2008-01-01

The purpose of this literature review was to identify current trends and issues in research focusing on career and technical education (CTE). The primary sources of literature for this review included all research articles published in three refereed scholarly journals--"Career and Technical Education Research," "Journal of Career and Technical…

The cavity heat pipe Stirling receiver for space solar dynamics

NASA Technical Reports Server (NTRS)

Kesseli, James B.; Lacy, Dovie E.

1989-01-01

The receiver/storage unit for the low-earth-orbiting Stirling system is discussed. The design, referred to as the cavity heat pipe (CHP), has been optimized for minimum specific mass and volume width. A specific version of this design at the 7-kWe level has been compared to the space station Brayton solar dynamic design. The space station design utilizes a eutectic mixture of LiF and CaF2. Using the same phase change material, the CHP has been shown to have a specific mass of 40 percent and a volume of 5 percent of that of the space station Brayton at the same power level. Additionally, it complements the free-piston Stirling engine in that it also maintains a relatively flat specific mass down to at least 1 kWe. The technical requirements, tradeoff studies, critical issues, and critical technology experiments are discussed.

Technical and Vocational Education in Asia and Oceania. Bulletin of the Unesco Regional Office for Education in Asia and Oceania. Number 21, June 1980.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and Oceania.

This issue contains a regional review, discussion of technical and vocational education in countries of Asia and Oceania, articles dealing with various aspects of technical and vocational education, and a bibliographical supplement. The brief statistical review in section 1 concerns second-level technical and vocational education in the developing…

Ethical aspects of future health care: globalisation of markets and differentiation of societies - ethical challenges.

PubMed

Kluge, Eike-Henner W

2008-01-01

The shift in health care to an aggregate corporate and distributed model dominated by electronic methods of diagnosis, record-keeping and communication spanning jurisdictional boundaries raises technical, social and paradigmatic issues. The technical issues concern the material natures of the tools, devices, procedures and protocols; the social issues gravitate around abstract matters like individual rights and models of responsibility within a corporate setting and accountability in inter-jurisdictional contexts; the paradigmatic issues centre in the question of how the rights and duties of traditional and direct health care translate into the mediated context of the globally expanded corporate model of eHealth and telemedicine. The present discussion presents a brief overview of the issues and sketches some of their implications for the evolution of contemporary health care.

Federal Guidance for Radiation Protection

EPA Pesticide Factsheets

EPA produces federal guidance technical reports, which standardize dose and risk assessment and issues radiation protection guidance to federal agencies. This page provides links to federal guidance policy recommendations and technical reports.

77 FR 12799 - Census Scientific Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-02

...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... and technical expertise, as appropriate, to address Census Bureau program needs and objectives. The...

75 FR 16078 - Census Scientific Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-31

...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... and technical expertise, as appropriate, to address Census Bureau program needs and objectives. The...

76 FR 54197 - Census Scientific Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-31

...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... scientific and technical expertise, as appropriate, to address Census Bureau program needs and objectives...

Design Issues for Producing Effective Multimedia Presentations.

ERIC Educational Resources Information Center

Mason, Lisa D.

1997-01-01

Discusses design issues for interactive multimedia. Notes that technical communication instructors must consider navigational aids, the degree of control a user should have, audio cues, color and typographical elements, visual elements, and copyright issues. (RS)

An acceptable role for computers in the aircraft design process

NASA Technical Reports Server (NTRS)

Gregory, T. J.; Roberts, L.

1980-01-01

Some of the reasons why the computerization trend is not wholly accepted are explored for two typical cases: computer use in the technical specialties and computer use in aircraft synthesis. The factors that limit acceptance are traced in part, to the large resources needed to understand the details of computer programs, the inability to include measured data as input to many of the theoretical programs, and the presentation of final results without supporting intermediate answers. Other factors are due solely to technical issues such as limited detail in aircraft synthesis and major simplifying assumptions in the technical specialties. These factors and others can be influenced by the technical specialist and aircraft designer. Some of these factors may become less significant as the computerization process evolves, but some issues, such as understanding large integrated systems, may remain issues in the future. Suggestions for improved acceptance include publishing computer programs so that they may be reviewed, edited, and read. Other mechanisms include extensive modularization of programs and ways to include measured information as part of the input to theoretical approaches.

A One System Integrated Approach to Simulant Selection for Hanford High Level Waste Mixing and Sampling Tests - 13342

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thien, Mike G.; Barnes, Steve M.

2013-07-01

The Hanford Tank Operations Contractor (TOC) and the Hanford Waste Treatment and Immobilization Plant (WTP) contractor are both engaged in demonstrating mixing, sampling, and transfer system capabilities using simulated Hanford High-Level Waste (HLW) formulations. This represents one of the largest remaining technical issues with the high-level waste treatment mission at Hanford. Previous testing has focused on very specific TOC or WTP test objectives and consequently the simulants were narrowly focused on those test needs. A key attribute in the Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2010-2 is to ensure testing is performed with a simulant that represents the broadmore » spectrum of Hanford waste. The One System Integrated Project Team is a new joint TOC and WTP organization intended to ensure technical integration of specific TOC and WTP systems and testing. A new approach to simulant definition has been mutually developed that will meet both TOC and WTP test objectives for the delivery and receipt of HLW. The process used to identify critical simulant characteristics, incorporate lessons learned from previous testing, and identify specific simulant targets that ensure TOC and WTP testing addresses the broad spectrum of Hanford waste characteristics that are important to mixing, sampling, and transfer performance are described. (authors)« less

Information Systems, Security, and Privacy.

ERIC Educational Resources Information Center

Ware, Willis H.

1984-01-01

Computer security and computer privacy issues are discussed. Among the areas addressed are technical and human security threats, security and privacy issues for information in electronic mail systems, the need for a national commission to examine these issues, and security/privacy issues relevant to colleges and universities. (JN)

Socio-technical issues and challenges in implementing safe patient handovers: insights from ethnographic case studies.

PubMed

Balka, Ellen; Tolar, Marianne; Coates, Shannon; Whitehouse, Sandra

2013-12-01

Ineffective handovers in patient care, including those where information loss occurs between care providers, have been identified as a risk to patient safety. Computerization of health information is often offered as a solution to improve the quality of care handovers and decrease adverse events related to patient safety. The purpose of this paper is to broaden our understanding of clinical handover as a patient safety issue, and to identify socio-technical issues which may come to bear on the success of computer based handover tools. Three in depth ethnographic case studies were undertaken. Field notes were transcribed and analyzed with the aid of qualitative data analysis software. Within case analysis was performed on each case, and subsequently, cross case analyses were performed. We identified five types of socio-technical issues which must be addressed if electronic handover tools are to succeed. The inter-dependencies of these issues are addressed in relation to arenas in which health care work takes place. We suggest that the contextual nature of information, ethical and medico-legal issues arising in relation to information handover, and issues related to data standards and system interoperability must be addressed if computerized health information systems are to achieve improvements in patient safety related to handovers in care. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Human factors in industrial systems: 40 years on.

PubMed

Drury, Colin G

2008-06-01

I evaluate the contribution of a pioneering Human Factors special issue on human factors in industrial systems. Papers on the content of the journal's first 10 years showed that industrial human factors/ergonomics (HF/E) in 1969 was quite a rarity in the journal and the society. The 12 papers in the special issue are reviewed briefly and show a wide range of topics, including traditional industrial engineering, physical HF/E, and more mainstream applications of HF/E in this domain similar to those in military and aerospace domains. The evaluation is through citations, later journal content, society technical group membership, and specific influences of Harris's own paper in the issue. The expected direct citation influence of this special issue was not found: Citation counts were in line with all papers in Human Factors. However, other journals have been founded in North America that serve industrial HF/E and provide an outlet for more papers per year than Human Factors. In addition, the industrial domain is well represented in the Human Factors and Ergonomics Society. Finally, Harris's paper has been influential in the specific area of HF/E in inspection. Industrial HF/E is now more accepted within the HF/E community, although largely in the physical ergonomics subspecialty. There is now evidence of use of HF/E techniques more broadly in industry, including service as well manufacturing enterprises.

Towards technical interoperability in telemedicine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craft, Richard Layne, II

2004-05-01

For telemedicine to realize the vision of anywhere, anytime access to care, the question of how to create a fully interoperable technical infrastructure must be addressed. After briefly discussing how 'technical interoperability' compares with other types of interoperability being addressed in the telemedicine community today, this paper describes reasons for pursuing technical interoperability, presents a proposed framework for realizing technical interoperability, identifies key issues that will need to be addressed if technical interoperability is to be achieved, and suggests a course of action that the telemedicine community might follow to accomplish this goal.

Solar energy in California industry - Applications, characteristics and potential

NASA Technical Reports Server (NTRS)

Barbieri, R. H.; Pivirotto, D. S.

1978-01-01

Results of a survey to determine the potential applicability of solar thermal energy to industrial processes in California are presented. It is found that if the heat for all industrial processes at temperatures below 212 F were supplied by solar energy, total state energy consumption could be reduced by 100 trillion Btus (2%), while the use of solar energy in processes between 212 and 350 F could displace 500 trillion Btus. The issues and problems with which solar energy must contend are illustrated by a description of fluid milk processing operations. Solar energy application is found to be technically feasible for processes with thermal energy requirements below 212 F, with design, and degree of technical, economic and management feasibility being site specific. It is recommended that the state provide support for federal and industrial research, development and demonstration programs in order to stimulate acceptance of solar process heat application by industry.

Technical Review of SRS Dose Reconstrruction Methods Used By CDC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpkins, Ali, A

2005-07-20

At the request of the Centers for Disease Control and Prevention (CDC), a subcontractor Advanced Technologies and Laboratories International, Inc.(ATL) issued a draft report estimating offsite dose as a result of Savannah River Site operations for the period 1954-1992 in support of Phase III of the SRS Dose Reconstruction Project. The doses reported by ATL differed than those previously estimated by Savannah River Site SRS dose modelers for a variety of reasons, but primarily because (1) ATL used different source terms, (2) ATL considered trespasser/poacher scenarios and (3) ATL did not consistently use site-specific parameters or correct usage parameters. Themore » receptors with the highest dose from atmospheric and liquid pathways were within about a factor of four greater than dose values previously reported by SRS. A complete set of technical comments have also been included.« less

Computational models of an inductive power transfer system for electric vehicle battery charge

NASA Astrophysics Data System (ADS)

Anele, A. O.; Hamam, Y.; Chassagne, L.; Linares, J.; Alayli, Y.; Djouani, K.

2015-09-01

One of the issues to be solved for electric vehicles (EVs) to become a success is the technical solution of its charging system. In this paper, computational models of an inductive power transfer (IPT) system for EV battery charge are presented. Based on the fundamental principles behind IPT systems, 3 kW single phase and 22 kW three phase IPT systems for Renault ZOE are designed in MATLAB/Simulink. The results obtained based on the technical specifications of the lithium-ion battery and charger type of Renault ZOE show that the models are able to provide the total voltage required by the battery. Also, considering the charging time for each IPT model, they are capable of delivering the electricity needed to power the ZOE. In conclusion, this study shows that the designed computational IPT models may be employed as a support structure needed to effectively power any viable EV.

CIM's bridge from CADD to CAM: Data management requirements for manufacturing engineering

NASA Technical Reports Server (NTRS)

Ford, S. J.

1984-01-01

Manufacturing engineering represents the crossroads of technical data management in a Computer Integrated Manufacturing (CIM) environment. Process planning, numerical control programming and tool design are the key functions which translate information from as engineered to as assembled. In order to transition data from engineering to manufacturing, it is necessary to introduce a series of product interpretations which contain an interim introduction of technical parameters. The current automation of the product definition and the production process places manufacturing engineering in the center of CAD/CAM with the responsibility of communicating design data to the factory floor via a manufacturing model of the data. A close look at data management requirements for manufacturing engineering is necessary in order to establish the overall specifications for CADD output, CAM input, and CIM integration. The functions and issues associated with the orderly evolution of computer aided engineering and manufacturing are examined.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Continuing the tradition established in prior years, this panel encompasses one of the broadest ranges of topics and issues of any panel at the Summer Study. It includes papers addressing all sectors, low-income residential to industrial, and views energy efficiency from many perspectives including programmatic, evaluation, codes, standards, legislation, technical transfer, economic development, and least-cost planning. The papers represent work being performed in most geographic regions of the United States and in the international arena, specifically Thailand, China, Europe, and Scandinavia. This delightful smorgasbord has been organized, based on general content area, into the following eight sessions: (1) new directionsmore » for low-income weatherization; (2) pursuing efficiency through legislation and standards; (3) international perspectives on energy efficiency; (4) technical transfer strategies; (5) government energy policy; (6) commercial codes and standards; (7) innovative programs; and, (8) state-of-the-art review. For these conference proceedings, individual papers are processed separately for the Energy Data Base.« less

75 FR 16817 - Meeting for Software Developers on the Technical Specifications for Common Formats for Patient...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-02

... Software Developers on the Technical Specifications for Common Formats for Patient Safety Data Collection... software developers can provide input on these technical specifications for the Common Formats Version 1.1... specifications, which provide direction to software developers that plan to implement the Common Formats...

Unattended sensors community of interest: expanding intelligence awareness, optimizing mission support

NASA Astrophysics Data System (ADS)

Helt, Paul J.; DuBois, Dennis

2012-06-01

The scope and success of Department of Defense (DoD), Intelligence Community (IC), and other United States Government (USG) Unattended Sensor efforts clearly requires a focused, expanded effort at integration and best practices development. Discussions with key stakeholders indicate strong support for the standup of an Unattended Sensors Community of Interest (USCOI) to improve visibility across programs and foster greater mission partnerships. The USCOI will advance understanding of legal and privacy issues, data sharing, Intelligence Surveillance and Reconnaissance (ISR) architecture integration standards, technical specifications, and other issues of common interest (power management, concealment, etc.); promoting opportunities for cost avoidance and improved effectiveness. Launching the USCOI concept provides a stakeholders' forum to identify, discuss, and facilitate Doctrine, Organization, Training, Material, Leadership, Personnel and Facilities (DOTMLPF) resolutions to issues related to the acquisition, development, and employment of unattended sensors across the DoD, IC, and broader USG, as appropriate. USCOI also provides a structured forum where appropriately cleared law enforcement can share operational and technical experiences and expertise on integration of unattended sensor data in existing/planned collection and analysis architectures. The USCOI concept can help facilitate extensive independent discussion across the community and enhance subject matter expert and leadership perspectives. Many senior leaders believe DoD and the IC have a great deal to learn from law enforcement use of unattended sensors and data integration. The USCOI will broaden awareness and open dialogue among users and developers across the interagency, law enforcement, and academia.

TU-G-201-00: Imaging Equipment Specification and Selection in Radiation Oncology Departments

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This session will update therapeutic physicists on technological advancements and radiation oncology features of commercial CT, MRI, and PET/CT imaging systems. Also described are physicists’ roles in every stage of equipment selection, purchasing, and operation, including defining specifications, evaluating vendors, making recommendations, and optimal and safe use of imaging equipment in radiation oncology environment. The first presentation defines important terminology of CT and PET/CT followed by a review of latest innovations, such as metal artifact reduction, statistical iterative reconstruction, radiation dose management, tissue classification by dual energy CT and spectral CT, improvement in spatial resolution and sensitivity in PET, andmore » potentials of PET/MR. We will also discuss important technical specifications and items in CT and PET/CT purchasing quotes and their impacts. The second presentation will focus on key components in the request for proposal for a MRI simulator and how to evaluate vendor proposals. MRI safety issues in radiation Oncology, including MRI scanner Zones (4-zone design), will be discussed. Basic MR terminologies, important functionalities, and advanced features, which are relevant to radiation therapy, will be discussed. In the third presentation, justification of imaging systems for radiation oncology, considerations in room design and construction in a RO department, shared use with diagnostic radiology, staffing needs and training, clinical/research use cases and implementation, will be discussed. The emphasis will be on understanding and bridging the differences between diagnostic and radiation oncology installations, building consensus amongst stakeholders for purchase and use, and integrating imaging technologies into the radiation oncology environment. Learning Objectives: Learn the latest innovations of major imaging systems relevant to radiation therapy Be able to describe important technical specifications of CT, MRI, and PET/CT Understand the process of budget request, equipment justification, comparisons of technical specifications, site visits, vendor selection, and contract development.« less

Direct, Operational Field Test Evaluation, Institutional Issues

DOT National Transportation Integrated Search

1998-08-01

INSTITUTIONAL ISSUES HAVE BEEN DEFINED AS NON-TECHNICAL ISSUES OR CONCERNS THAT INFLUENCE THE COURSE AND OUTCOME OF AN OPERATIONAL TEST. OFTEN THEY ARE EVENTS AND/OR CIRCUMSTANCES THAT AFFECT ADMINISTRATION, DESIGN, DEPLOYMENT AND EVALUATION OF THE O...

An Automatic Weather Station Network for Low-Altitude Wind Shear Investigations

DTIC Science & Technology

1984-09-18

information exchange. The United States Government assumes no liability for its contents or use thereof. 4 . ... . . . . . . . . . . . ... ° TECHNICAL REPORT...technical issues asso- ciated with unique FAA needs for weather information used by pilots, air traffic controllers and meteorologists. The weather radar...warnings be free of false alarms and be issued in a timely manner. During the summer of 1983, Lincoln began a long term study that places emphasis on

The Computer Science Technical Report (CS-TR) Project: A Pioneering Digital Library Project Viewed from a Library Perspective.

ERIC Educational Resources Information Center

Anderson, Greg; And Others

1996-01-01

Describes the Computer Science Technical Report Project, one of the earliest investigations into the system engineering of digital libraries which pioneered multiinstitutional collaborative research into technical, social, and legal issues related to the development and implementation of a large, heterogeneous, distributed digital library. (LRW)

ILGWU Worker-Family Education Program. ESL/Technical Curriculum Manual.

ERIC Educational Resources Information Center

Friedman, Judy; Friedman, Deidre

The curriculum for the International Ladies' Garment Workers' Union (ILGWU) English as a Second Language (ESL) and technical classes is a collection of instructional materials and suggestions focusing on workplace-related topics and issues. This guide is intended for use in classes where one technical and one ESL teacher are present and where…

Programs of Study: Year 2 Joint Technical Report. Research Snapshot

ERIC Educational Resources Information Center

National Research Center for Career and Technical Education, 2010

2010-01-01

In January 2010, the National Research Center for Career and Technical Education (NRCCTE) issued a progress report on three studies being conducted by the Center that examine the implementation and outcomes of Programs of Study (POS), which were required in the 2006 reauthorization of the federal legislation for career and technical education…

The Writer's Mind: Ethics in the Teaching of Technical Writing.

ERIC Educational Resources Information Center

Rubens, Philip M.

As opposed to being a "closed" text (tightly constrained by physical formats, corporate style, and specialized vocabulary), technical writing is actually "open" in the sense that such a text can be interpreted subjectively by an informed audience. Three ethical issues that should be explored in teaching technical writing include personality--the…

76 FR 60017 - Technical Conference on Penalty Guidelines; Notice of Technical Conference on Penalty Guidelines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

... Conference on Penalty Guidelines; Notice of Technical Conference on Penalty Guidelines The staff of the... the Penalty Guidelines, which the Commission issued on September 17, 2010.\\1\\ The conference will be... impact of the Penalty Guidelines on compliance and enforcement matters. More information on the topics to...

76 FR 78641 - Southwestern Gas Storage Technical Conference; Notice of Public Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-19

... Storage Technical Conference; Notice of Public Conference Take notice that on February 16, 2012 at 9 a.m... technical conference with interested parties to discuss issues related to natural gas storage development in... Cold Weather Event of February 1-5, 2011: Causes and Recommendations, ``[a]dditional gas storage...

"Crafts and Technology" and "Technical Education" in Austria

ERIC Educational Resources Information Center

Seiter, Josef

2009-01-01

In Austria, the syllabus for "Technisches Werken/Crafts and Technology" for all types of school in general education was issued more than 30 years ago. The authors believed that it might lay the foundations for technical literacy. The paper is about how the situation of the subject and, with it, technical education has developed since…

Bibliography of Lewis Research Center technical publications announced in 1981

NASA Technical Reports Server (NTRS)

1982-01-01

Technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1981 are indexed and abstracted. All the publications were announced in the 1981 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patent applications, and theses. A total of 384 technical publications is listed.

Online Hazardous Waste Cleanup Technical Resources

EPA Pesticide Factsheets

This issue paper is intended to give the reader examples of some online technical resources that can assist with hazardous waste cleanups in the Superfund, Resource Conservation and Recovery Act (RCRA), and Brownfields programs.

75 FR 51239 - Census Scientific Advisory Committee; Notice of Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-19

... Advisory Committee (C-SAC). The Committee will address policy, research, and technical issues relating to a.... The Committee provides scientific and technical expertise, as appropriate, to address Census Bureau...

An Ontology for Requesting Distant Robotic Action: A Case Study in Naming and Action Identification for Planning on the Mars Exploration Rover Mission

NASA Technical Reports Server (NTRS)

Wales, Roxana C.; Shalin, Valerie L.; Bass, Deborah S.

2004-01-01

This paper focuses on the development and use of the abbreviated names as well as an emergent ontology associated with making requests for action of a distant robotic rover during the 2003-2004 NASA Mars Exploration Rover (MER) mission, run by the Jet Propulsion Laboratory. The infancy of the domain of Martian telerobotic science, in which specialists request work from a rover moving through the landscape, as well as the need to consider the interdisciplinary teams involved in the work required an empirical approach. The formulation of this ontology is grounded in human behavior and work practice. The purpose of this paper is to identify general issues for an ontology of action (specifically for requests for action), while maintaining sensitivity to the users, tools and the work system within a specific technical domain. We found that this ontology of action must take into account a dynamic environment, changing in response to the movement of the rover, changes on the rover itself, as well as be responsive to the purposeful intent of the science requestors. Analysis of MER mission events demonstrates that the work practice and even robotic tool usage changes over time. Therefore, an ontology must adapt and represent both incremental change and revolutionary change, and the ontology can never be more than a partial agreement on the conceptualizations involved. Although examined in a rather unique technical domain, the general issues pertain to the control of any complex, distributed work system as well as the archival record of its accomplishments.

University Prosperity Game. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyack, K.W.; Berman, M.

Prosperity Games are an outgrowth and adaptation of move/countermove and seminar War Games. Prosperity Games are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education and research. These issues can be examined from a variety of perspectives ranging from a global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions in specific industries. All Prosperity Games are unique in that both the game format and the player contributions vary from game to game. This report documents the University Prosperity Game conducted under the sponsorship of the Anderson Schools of Management atmore » the University of New Mexico. This Prosperity Game was initially designed for the roadmap making effort of the National Electronics Manufacturing Initiative (NEMI) of the Electronics Subcommittee of the Civilian Industrial Technology Committee under the aegis of the National Science and Technology Council. The game was modified to support course material in MGT 508, Ethical, Political, and Social Environment of Business. Thirty-five students participated as role players. In this educational context the game`s main objectives were to: (1) introduce and teach global competitiveness and business cultures in an experiential classroom setting; (2) explore ethical, political, and social issues and address them in the context of global markets and competition; and (3) obtain non-government views regarding the technical and non-technical (i.e., policy) issues developed in the NEMI roadmap-making endeavor. The negotiations and agreements made during the game, along with the student journals detailing the players feelings and reactions to the gaming experience, provide valuable insight into the benefits of simulation as an advanced learning tool in higher education.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, Richard Thomas; Ewing, Paul D.

The U.S. Nuclear Regulatory Commission’s (NRC’s) regulations in Part 50, “Domestic Licensing of Production and Utilization Facilities,” of Title 10 of the Code of Federal Regulations (10 CFR Part 50) state that structures, systems, and components important to safety in a nuclear power plant are to be designed to accommodate the effects of environmental conditions (i.e., remain functional under all postulated service conditions) and that design control measures such as testing are to be used to check the adequacy of design. Regulatory Guide (RG) 1.180 was developed to provide guidance to licensees and applicants on methods acceptable to the NRCmore » staff for complying with the NRC’s regulations on design, installation, and testing practices for addressing the effects of electromagnetic and radio-frequency interference (EMI/RFI) and power surges on safety-related instrumentation and control (I&C) systems. The first revision of RG 1.180 was issued in January 2000 and a second revision was issued in October 2003*. The second revision differed from the first revision in endorsing Military Standard (MIL-STD)-461E and the International Electrotechnical Commission (IEC) Standard (Std) 61000 series of EMI/RFI test methods, extending the guidance to cover signal line testing, incorporating frequency ranges where portable communications devices are experiencing increasing use, and relaxing the operating envelopes (test levels) when experience and confirmatory research warranted. It also offered exemptions from specific test criteria based on technical considerations such as plant conditions and the intended location of the safety-related I&C equipment. Since the last revision, new requirements have been identified, associated RGs have been created and updated, and additional industry guidance has been developed. Additionally, the operational environment has changed with the increase in wireless communication technology for both personal (smartphone) and industrial (remote I&C) purposes. Also, specific concerns and issues with testing methods and methodologies have been identified that must be addressed. Further, most of the standards that serve as the basis for the RG have been revised. Therefore, the NRC’s Office of Regulatory Research has contracted with Oak Ridge National Laboratory (ORNL) to incorporate new information and resolve the identified issues under NRC-HQ-60-14-D-0015, “Update to RG 1.180, Revision 2, Guidelines for Evaluating Electromagnetic and Radio-Frequency Interference in Safety-Related Instrumentation and Control Systems.” The ultimate goal of this project is to provide NRC the technical basis for developing and publishing a new revision of the RG. The focus of Task 4 was for ORNL to identify and address any new or additional EMI/RFI issues that could potentially impact the EMC of I&C systems. More specifically, ORNL was to evaluate the impact of any new issue on safety equipment in their local environments and then determine whether the issues should be included and discussed in the revision to RG 1.180 that is currently under way.« less

ICU staffing: identification and survey of staff involved in providing technical support services to Australian and New Zealand intensive care units.

PubMed

Carter, B G; Kiraly, N; Hochmann, M; Stephens, R; Osborne, A

2007-04-01

We conducted a survey of all (200) Australian and New Zealand intensive care units to determine the presence and nature of staff employed in a technical support role. Specifically, we attempted to identify staff who are formally employed in a role where they are directly responsible for the equipment used in intensive care. Of 130 returned surveys, 80 units (62%) reported not having any personnel in this role. In these units technical tasks were most commonly performed by registered nurses (79%) but were also performed by a variety of other personnel. Fifty units (38%), consisting of approximately 105 individuals providing a total of 84.3 EFTs and most commonly in public (84%) or metropolitan (70%) hospitals or level 3 (64%) intensive care units, did have one or more staff acting in a formal technical support role. The most common groups filling the technical support role were nurses (42%), technicians (24%), biomedical engineers (10%) and technologists (6%). The most common duties performed were equipment troubleshooting (92%), training (80%), equipment evaluation (80%), ordering supplies (77%), consumable evaluation (75%), equipment cleaning (73%), delivery of supplies (70%), handling product recalls (65%), equipment maintenance (65%) and sitting on hospital committees (52%). This is the first attempt to identify and understand the technical support role in Australian and New Zealand intensive care units. Numerous issues remain and future work will hopefully add to our findings, with the possibility of formal recognition of the role, training and/or accreditation and its extension into other hospital departments.

Supporting tobacco control: stimulating local newspaper coverage with a technical assistance website for local coalitions.

PubMed

Buller, David B; Bettinghaus, Erwin P; Helme, Donald; Young, Walter F; Borland, Ron; Maloy, Julie A; Cutter, Gary R; Andersen, Peter A; Walther, Joseph B

2011-11-01

A large and growing literature confirms that well-designed web-based programs can be effective in preventing or treating several chronic diseases. This study examined how the Internet can deliver information and train community activists and specifically tested the effects of web-based technical assistance on local tobacco control coalitions' efforts to use media advocacy to advance their agendas. The authors compared a highly interactive, Enhanced website (intervention) to a noninteractive, Basic text-based website (comparison) in Colorado communities. A total of 24 tobacco control coalitions led by local county health departments and nursing services were enrolled in the project and randomly assigned to use either the intervention or comparison website. A total of 73 local daily and weekly newspapers were identified in the service areas of 23 of the 24 coalitions. A posttest assessment of newspaper coverage was conducted to locate all newspaper articles with tobacco control information published between January 1 and April 9, 2004, the last 3 months of the intervention. Although there was no evidence of a treatment effect on the frequency of newspaper articles on tobacco-related issues, there was, however, evidence that newspapers in counties where the coalition had access to the Enhanced website printed more stories focused on local/regional issues and more anti-tobacco local/regional stories than in the counties where coalitions had access to the Basic website. Coalitions can improve their influence on local media for community tobacco control when high-quality online technical assistance, training, and resources are available to them.

Bibliographies.

ERIC Educational Resources Information Center

Bourdon, Cathleen

1999-01-01

Provides "The Librarian's Bookshelf" a selected annotated bibliography of books (mostly published since 1995) to help librarians deal with the issues of providing appropriate service to children and adults. Lists titles alphabetically in several categories of technical services and issues, instruction, information services, legal issues,…

ERCMExpress. Volume 3, Issue 4

ERIC Educational Resources Information Center

Taymans, Mary Frances; McDonald, Dale

2007-01-01

The Emergency Response and Crisis Management (ERCM) Technical Assistance Center's "ERCMExpress" is a newsletter that provides comprehensive information on key issues in school emergency management. This issue, entitled "Emergency Management Opportunities and Challenges for Non-Public Schools," examines integrating non-public…

77 FR 52553 - Standards of Performance for Stationary Gas Turbines; Standards of Performance for Stationary...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

...The EPA is proposing to amend the new source performance standards (NSPS) for stationary gas turbines and stationary combustion turbines. These amendments are primarily in response to issues raised by the regulated community. On July 6, 2006, the EPA promulgated amendments to the new source performance standards for stationary combustion turbines. On September 5, 2006, the Utility Air Regulatory Group filed a petition for reconsideration of certain aspects of the promulgated standards. The EPA is proposing to amend specific provisions in the NSPS to resolve issues and questions raised by the petition for reconsideration, and to address other technical and editorial issues. In addition, this proposed rule would amend the location and wording of existing paragraphs for clarity. The proposed amendments would increase the environmental benefits of the existing requirements because the emission standards would apply at all times. The proposed amendments would also promote efficiency by recognizing the environmental benefit of combined heat and power and the beneficial use of low energy content gases.

Legal and ethical issues in research

PubMed Central

Yip, Camille; Han, Nian-Lin Reena; Sng, Ban Leong

2016-01-01

Legal and ethical issues form an important component of modern research, related to the subject and researcher. This article seeks to briefly review the various international guidelines and regulations that exist on issues related to informed consent, confidentiality, providing incentives and various forms of research misconduct. Relevant original publications (The Declaration of Helsinki, Belmont Report, Council for International Organisations of Medical Sciences/World Health Organisation International Guidelines for Biomedical Research Involving Human Subjects, World Association of Medical Editors Recommendations on Publication Ethics Policies, International Committee of Medical Journal Editors, CoSE White Paper, International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use-Good Clinical Practice) form the literature that are relevant to the ethical and legal aspects of conducting research that researchers should abide by when conducting translational and clinical research. Researchers should note the major international guidelines and regional differences in legislation. Hence, specific ethical advice should be sought at local Ethics Review Committees. PMID:27729698

Leveraging Independent Management and Chief Engineer Hierarchy: Vertically and Horizontally-Derived Technical Authority Value

NASA Technical Reports Server (NTRS)

Barley, Bryan; Newhouse, Marilyn

2012-01-01

In the development of complex spacecraft missions, project management authority is usually extended hierarchically from NASA's highest agency levels down to the implementing institution's project team level, through both the center and the program. In parallel with management authority, NASA utilizes a complementary, but independent, hierarchy of technical authority (TA) that extends from the agency level to the project, again, through both the center and the program. The chief engineers (CEs) who serve in this technical authority capacity oversee and report on the technical status and ensure sound engineering practices, controls, and management of the projects and programs. At the lowest level, implementing institutions assign project CEs to technically engage projects, lead development teams, and ensure sound technical principles, processes, and issue resolution. At the middle level, programs and centers independently use CEs to ensure the technical success of their projects and programs. At the agency level, NASA's mission directorate CEs maintain technical cognizance over every program and project in their directorate and advise directorate management on the technical, cost, schedule, and programmatic health of each. As part of this vertically-extended CE team, a program level CE manages a continually varying balance between penetration depth and breadth across his or her assigned missions. Teamwork issues and information integration become critical for management at all levels to ensure value-added use of both the synergy available between CEs at the various agency levels, and the independence of the technical authority at each organization.

76 FR 19766 - California Independent System Operator Corporation; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-08

...) Capacity Procurement Mechanism (CPM) and exceptional dispatch mitigation provisions.\\1\\ Take notice that... (2011). The purpose of the technical conference is to discuss the issues raised by CAISO's proposed CPM...

Finance Program, Technical Assistance Brief 1

DOT National Transportation Integrated Search

1993-01-01

This four page pamphlet highlights the work of the Federal Transit : Administration's Office of Technical Assistance and Safety. Articles in this : issue are: Transit's Finance Challenge, which discusses the three main aspects : of the Office's Finan...

New Frameworks for Detecting and Minimizing Information Leakage in Anonymized Network Data

DTIC Science & Technology

2011-10-01

researcher the exact extent to which a particular utility is affected by the anonymization. For instance, Karr et al.’s use of the Kullback - Leibler ...technical, legal, policy, and privacy issues limit the ability of operators to produce data sets for information security testing . In an effort to...technical, legal, policy, and privacy issues limit the ability of operators to produce datasets for information security testing . In an effort to help

Technical Issues in Evolving to Integrated Services Digital Network (ISDN)

DTIC Science & Technology

1991-06-01

channel through some Page 13 Technical Issues in Evolving to ISDN Final Report separate interface (such as the AT command set of the Hayes modems or the...errors experienced over standard modem provided connectivity. But, in this project connectivity has been established only over a single CO. Those...examined to some extent and are discussed below. Existing equipment was of two types: that which treats ISDN as just another leased line providing 56k or

PUBLIC POLICY ISSUES, REPLY LEGAL BRIEF, AND TECHNICAL AND ECONOMIC DATA, BEFORE THE FEDERAL COMMUNICATIONS COMMISSION, IN THE MATTER OF THE ESTABLISHMENT OF DOMESTIC COMMUNICATIONS SATELLITE FACILITIES BY NON-GOVERNMENTAL ENTITIES, DOCKET 16495.

ERIC Educational Resources Information Center

Ford Foundation, New York, NY.

THE THREE PARTS OF THIS FORD FUNDATION SUBMISSION PROVIDE INFORMATION ON BROAD ISSUES OF ORGANIZATION AND PUBLIC POLICY AS THEY RELATE TO SATELLITE MODEL SYSTEMS BNS-3 AND BNS-4, ON LEGAL PROBLEMS OF AUTHORIZATION AND CONTROL, AND ON THE TECHNICAL CHARACTERISTICS, COSTS, AND BROADCAST SPECTRUM LIMITATIONS OF EACH SYSTEM. VOLUME I OUTLINES…

Sofia Science Working Group

NASA Technical Reports Server (NTRS)

Zmuidzinas, J.

1997-01-01

The purpose of this grant was to enable the Principal Investigator (P.I.) to travel to and participate in the meetings and activities of the NASA SOFIA Science Working Group (SSWG), and to spend time working on some of the associated technical issues relating to the SOFIA (Stratospheric Observatory for Infrared Astronomy) project. The SOFIA Science Working Group was established to help develop the plans and specifications for the next-generation airborne observatory ("SOFIA"), which is now under development. The P.I. was asked to serve on the SSWG due to his experience in airborne astronomy: he has developed several astronomical instruments for the Kuiper Airborne Observatory NASA's previous airborne astronomy platform (which was decommissioned in 1995 in preparation for SOFIA). SOFIA, which will be a 747 SP aircraft carrying a 2.7 meter diameter telescope, is a joint project sponsored by NASA and DLR (the German space agency), and is now under development by a consortium including Universities Space Research Association (USRA), Raytheon, Sterling Software, and United Airlines. Further details on the SOFIA project can be found on the internet at http: //sofia. arc. nasa. gov. Rather than develop the SOFIA observatory in-house, NASA decided to privatize the project by issuing a Request for Proposals (RFP). The respondents to this RFP were consortia of private organizations which together had the required facilities and expertise to be able to carry out the project; the winner was the group led by USRA. One of the main roles of the SSWG was to help develop the technical specifications for the SOFIA observatory. In particular, the SSWG provided advice to NASA on the specifications that were written into the RFP, particularly those which had an important impact on the scientific productivity of the observatory. These specifications were discussed at the meetings of the SSWG, which were held primarily at NASA/Ames (in California) and at NASA Headquarters (in Washington DC). Apart from these meetings, members of the SSWG were expected to perform more detailed analyses of the impact of certain parameters and specifications on the performance of astronomical instruments. The SSWG ended its activities with the selection of the USRA team in January 1997.

Market and policy barriers to deployment of energy storage

DOE PAGES

Sioshansi, Ramteen; Denholm, Paul; Jenkin, Thomas

2012-04-01

There has recently been resurgent interest in energy storage, due to a number of developments in the electricity industry. Despite this interest, very little storage, beyond some small demonstration projects, has been deployed recently. While technical issues, such as cost, device efficiency, and other technical characteristics are often listed as barriers to storage, there are a number of non-technical and policy-related issues. This paper surveys some of these main barriers and proposes some potential research and policy steps that can help address them. Furthermore, while the discussion is focused on the United States, a number of the findings and observationsmore » may be more broadly applicable.« less

Considerations for the establishment of a machinery monitoring analysis program for surface ships of the US Navy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strunk, W.D.

1987-01-01

Personnel at the Oak Ridge National Laboratory were tasked by the US Navy to assist in establishing a maintenance monitoring program for machinery aboard surface ships. Given the number of surface ships, the variety of locations in which they operate, the different types of equipment (rotating and reciprocating, as well as instrumentation), and the different procedures which control the operation and maintenance of a ship, it can be seen, apart from the logistics of organizing such a monitoring program, that the technical issues are as varied and numerous as the ships themselves. Unique methods and procedures have been developed tomore » perform the tasks required on a large scale. Among the specific tasks and technical issues addressed were the development and installation of a data collection and communication instrumentation system for each port, the qualification of measurement methodologies and techniques, the establishment of computer data bases, the evaluation of the instrumentation used, training of civilian and military personnel, development of machinery condition assessment aids using machine design and modal analysis information, and development of computer displays. After these tasks were completed and the appropriate resolution integrated into the program, the final task was the development of a method to continually evaluate the effectiveness of the program, using actual maintenance records.« less

76 FR 7810 - Notice of Proposed Change to Section I of the South Dakota and North Dakota State Technical Guides

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

... must be made to the NRCS State Technical Guides concerning State wetland mapping conventions. The two States are proposing to issue joint State wetland mapping conventions. The joint State wetland mapping conventions will be used as part of the technical documents to conduct wetland determinations on agriculture...

Use of Career Education and Occupation Information Services in Boosting Enrolment into Vocational and Technical Education Programs in Nigeria

ERIC Educational Resources Information Center

Igbinedion, V. I.; Ojeaga, I. J.

2012-01-01

The major thrust of technical and vocational education (TVE) worldwide is to address issues of youth unemployment, poverty and international competitiveness in skills development towards current and projected opportunities and challenges. The paper posits that despite the evidence of numerous reforms in vocational and technical education programs…

76 FR 11417 - Public Workshop and Hearing for Rear Visibility; Federal Motor Vehicle Safety Standard, Rearview...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

...), Department of Transportation (DOT). ACTION: Notice of proposed rulemaking: Announcement of a public technical... this proposal. The first event, a public technical workshop, will be held on March 11, 2011, to discuss technical issues relevant to the test procedure described in the proposed rule. The second event, a public...

Government Information Quarterly. Volume 7, no. 2: National Aeronautics and Space Administration Scientific and Technical Information Programs. Special issue

NASA Technical Reports Server (NTRS)

Hernon, Peter (Editor); Mcclure, Charles R. (Editor); Pinelli, Thomas E. (Editor)

1990-01-01

NASA scientific and technical information (STI) programs are discussed. Topics include management of information in a research and development agency, the new space and Earth science information systems at NASA's archive, scientific and technical information management, and technology transfer of NASA aerospace technology to other industries.

77 FR 74658 - Texas Eastern Transmission, LP; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-17

...-captioned proceeding \\1\\ directed that a technical conference be held to address issues raised by Texas... adjustments. \\1\\ Texas Eastern Transmission, LP, 141 FERC ]61,172 (2012). Take notice that a technical conference will be held on Tuesday, January 15, 2013 at 9:30 a.m., in a room to be designated at the offices...

78 FR 48407 - Defense Federal Acquisition Regulation Supplement: Clauses With Alternates-Quality Assurance...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-08

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or...

TRICHLOROETHYLENE (TCE) ISSUE PAPERS

EPA Science Inventory

These issue papers are a part of EPA's effort to develop a trichloroethylene (TCE) human health risk assessment. These issue papers were developed by EPA to provide scientific and technical information to the National Academy of Sciences (NAS) for use in developing their advice ...

Building Your Campus Portal: Advice from the Field.

ERIC Educational Resources Information Center

Krebs, Arlene

2001-01-01

Discusses portal technology in higher education, including planning, design, technical, and financial issues. Highlights include determining the customers; marketing possibilities for the university; ownership issues; data design; effective cost structuring; security issues; adaptability; content; and customer input and feedback. (LRW)

[An investigation of the application of hygienic standards for the design of industrial enterprises (GBZ 1-2010)].

PubMed

Lu, Y; Zhang, M

2016-08-20

Objective: To study the applicability, the high frequency used content, the feasibility, and issues needed to be solved of the standard of GBZ 1-2010, aiming to provide technical evidence for the revision of GBZ1. Methods: In the study, the data were collected by referring to the literature database and the questionnaire from June 2013 to June 2015. There were 2 surveys carried out in the study, with methods including questionnaire survey and specific interview. The investigation methods include the paper version of the questionnaire by mail, the electronic version of the questionnaire by e-mail, and the online survey. And 111 questionnaires were collected. Results: In total, the applicability survey (the first survey) received 156 suggestions covering 76 items from 23 facilities, and 13 key technical issues were summarized to be solved as priorities. In the application survey (the second survey) , the leading three jobs using GBZ 1-2010 were the occupational hazards evaluation for constructive project (82.0%) , lecturing/training (65.8%) , occupational hazards monitoring (64.9%) , respectively. The high frequency used contents of GBZ 1-2010 were the sixth part "the basic hygienic requirements for workplace" (90.1%) , the fifth part "site selection, overall layout and workshop design" (87.4%) , the seventh part "the basic hygienic requirements for welfare room" (85.6%) , respectively. In the results of feasibility, scores of the fourth part "the general rules" , the fifth part "site selection, overall layout and workshop design" , the sixth part "the basic hygienic requirements for workplace" , the seventh part "the basic hygienic requirements for welfare room" , the eighth "emergency rescue" , annex A "the correct use instructions" , annex B "buffer zone standards for industrial enterprises" were 2.6, 3.1, 3.5, 3.8, 3.2, 3.3, 2.6, respectively. Among 111 questionnaires, the parts needed to be modified as priories were the fifth part "site selection, overall layout and workshop design" (51.4%) , and the sixth part "the basic hygienic requirements for workplace" (51.4%) . In results of the key technical issues needed to be modified of GBZ 1-2010, the contents needed to be added as priories were the occupational prevention and control requirements of biological factors (51.4%) , technical parameters of dust in workplace (48.7%) , technical parameters of hazardous agents in workplace (46.9%) , the quality and quantity requirements of fresh air (46.0%) , the setting conditions of the emergency rescue station (46.0%) , the hygienic design requirements of joint workshops and the evidence (45.1%) , and requirements for medical emergency rescue personnel equipped and qualified (45.1%) . Conclusion: GBZ 1-2010 is feasible and practical, mainly used by occupational health technical service organizations in the occupational hazards evaluation for constructive project, lecturing/training, occupational hazards monitoring, et al. GBZ 1 plays a directive role in government decision-making, control of constructive projects from the beginning, training and capacity building of occupational health professionals, and the prevention and treatment of occupational diseases in enterprises, needing to strengthen the implementation of GBZ 1. And on the basis of the above key technical issues to be revised, international cooperation and exchanges should be strengthened, so that it is adapted to the development of the modern enterprise system.

Enhancing US competitiveness through Federal scientific and technical information: Issues and opportunities

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.

1990-01-01

The possibility of using Federally funded scientific and technical information (STI) to increase U.S. industrial innovation and productivity is discussed. The history of Federally funded research and development in the fields of agriculture and aviation is reviewed as an example of successful government-sponsored research. Issues related to the production and utilization of information are considered and Federal STI policy is outlined. Issues related to the transfer of knowledge between government agencies and industry are examined and a model depicting the transfer of STI in aerospace research and development is presented. Also, consideration is given to the problem of open communication versus restricted access to STI.

[Health of immigrants in Italy: increasing evidences and forgotten issues in the epidemiological research].

PubMed

Fedeli, Ugo; Baussano, Iacopo

2010-01-01

To obtain a broad picture of epidemiological studies on health of immigrants in Italy, we analyzed abstracts presented at the last five annual meetings of the Italian Epidemiological Association (AIE), and abstracts on PubMed published in 2000-2009 (including also clinical studies). Studies at AIE meetings mainly used electronic archives of health records to investigate the overall health profile of immigrants, or specifically women and perinatal health; these surveys are then rarely published on scientific journals. By contrast, several areas addressed in the literature (infectious diseases, accidents, lifestyles, mental health, pediatric diseases, allergic diseases) are almost absent in recent AIE meetings. If Italian epidemiologists claim a role as technical support to policy makers, they should probably invest more in what has recently become the most important and debated issue in the Italian society.

Experimental design, power and sample size for animal reproduction experiments.

PubMed

Chapman, Phillip L; Seidel, George E

2008-01-01

The present paper concerns statistical issues in the design of animal reproduction experiments, with emphasis on the problems of sample size determination and power calculations. We include examples and non-technical discussions aimed at helping researchers avoid serious errors that may invalidate or seriously impair the validity of conclusions from experiments. Screen shots from interactive power calculation programs and basic SAS power calculation programs are presented to aid in understanding statistical power and computing power in some common experimental situations. Practical issues that are common to most statistical design problems are briefly discussed. These include one-sided hypothesis tests, power level criteria, equality of within-group variances, transformations of response variables to achieve variance equality, optimal specification of treatment group sizes, 'post hoc' power analysis and arguments for the increased use of confidence intervals in place of hypothesis tests.

Nuclear safety. Technical progress journal, October 1996--December 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The five papers in this issue address various issues associated with the behavior of high burnup fuels, especially under reactivity initiated accident (RIA) conditions. The mechanisms and parameters that have an effect on the fuel behavior are detailed, based on tests and analyses. The ultimate goal of the research reported is the development of new regulatory criteria for high burnup fuel under design basis accident conditions. Specific topics of the papers, which are abstracted individually in the database, are: (1) regulatory assessment of test data for RIAs, (2) high burnup fuel transient behavior under RIA conditions, (3) NSRR/RIA experiments withmore » high burnup PWR fuels, (4) the Russian RIA research program, and (5) RIA simulation experiments on the intermediate and high burnup test rods. The papers are contributed from the United States, France, Japan, and Russia.« less

Pretreatment Engineering Platform Phase 1 Final Test Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurath, Dean E.; Hanson, Brady D.; Minette, Michael J.

2009-12-23

Pacific Northwest National Laboratory (PNNL) was tasked by Bechtel National Inc. (BNI) on the River Protection Project, Hanford Tank Waste Treatment and Immobilization Plant (RPP-WTP) project to conduct testing to demonstrate the performance of the WTP Pretreatment Facility (PTF) leaching and ultrafiltration processes at an engineering-scale. In addition to the demonstration, the testing was to address specific technical issues identified in Issue Response Plan for Implementation of External Flowsheet Review Team (EFRT) Recommendations - M12, Undemonstrated Leaching Processes.( ) Testing was conducted in a 1/4.5-scale mock-up of the PTF ultrafiltration system, the Pretreatment Engineering Platform (PEP). Parallel laboratory testing wasmore » conducted in various PNNL laboratories to allow direct comparison of process performance at an engineering-scale and a laboratory-scale. This report presents and discusses the results of those tests.« less

Telecommunications companies and health in West Africa: the issues.

PubMed

Ankri, R; Maroune, M-H

2017-11-01

West Africa still faces important public health issues today: improving the health infrastructure, compensating for the lack of medical personnel, and bringing the rural "lost-to-follow-up" population into an inclusive healthcare system. At the same time, the boom in the mobile telephone market is providing important business opportunities for telecommunications companies in this field, leading to the rapid propagation of eHealth solutions. Thus, the telecom companies' technical innovations enable the creation of digital health solutions adapted to the specific needs of the West African market. The companies can thus increase their business through eHealth and simultaneously generate positive externalities (a healthier population), meeting the goals of their corporate social responsibility policies. We will see how these companies, aware of this opportunity, build these solutions and they meet the challenges they will confront.

Treatment 2.0: catalyzing the next phase of treatment, care and support.

PubMed

Duncombe, Chris; Ball, Andrew; Passarelli, Carlos; Hirnschall, Gottfried

2013-01-01

This review provides an update on the WHO/UNAIDS Treatment 2.0 strategy by reviewing the documents and technical updates issued under the initiative. Launched in 2010, this global initiative provides a framework for the continued scale-up of access to HIV care and treatment. WHO has prioritized once daily fixed-dose combination as the preferred antiretroviral (ARV) regimen to initiate HIV treatment, paving the way for programmatic simplification, with reduced toxicity and improved adherence. WHO also recommends the use of point-of-care diagnostics, with CD4 cell count technologies being implemented in the field and progress towards improving access to simplified viral load testing. The strategy also seeks mechanisms that can contribute to reducing treatment costs, such as pooled commodity procurement and public health-oriented licensing approaches. Improved service delivery, specifically through decentralization, task shifting, integration and community mobilization also has the potential to reduce costs and improve access. Support to countries has been provided through the timely release of a series of programmatic and technical updates on specific treatment-related topics. The Treatment 2.0 strategy articulates how innovation and greater efficiency can make HIV care and treatment more accessible and affordable, and guide treatment and prevention scale-up.

Convinced, ambivalent or annoyed: Tyrolean ski tourism stakeholders and their perceptions of climate change.

PubMed

Trawöger, Lisa

2014-02-01

Its focus on snow-dependent activities makes Alpine winter tourism especially sensitive to climate change. Stakeholder risk perceptions are a key factor in adaptation to climate change because they fundamentally drive or constrain stakeholder action. This paper examines climate change perceptions of winter tourism stakeholders in Tyrol (Austria). Using a qualitative approach, expert interviews were conducted. Four opinion categories reflecting different attitudes toward climate change issues were identified: convinced planners , annoyed deniers , ambivalent optimists , convinced wait-and-seers . Although the findings generally indicate a growing awareness of climate change, this awareness is mainly limited to perceiving the issue as a global phenomenon. Awareness of regional and branch-specific consequences of climate change that lead to a demand for action could not be identified. Current technical strategies, like snowmaking, are not primarily climate-induced. At present, coping with climate change is not a priority for risk management. The findings point out the importance of gaining and transferring knowledge of regional and branch-specific consequences of climate change in order to induce action at the destination level.

Convinced, ambivalent or annoyed: Tyrolean ski tourism stakeholders and their perceptions of climate change☆

PubMed Central

Trawöger, Lisa

2014-01-01

Its focus on snow-dependent activities makes Alpine winter tourism especially sensitive to climate change. Stakeholder risk perceptions are a key factor in adaptation to climate change because they fundamentally drive or constrain stakeholder action. This paper examines climate change perceptions of winter tourism stakeholders in Tyrol (Austria). Using a qualitative approach, expert interviews were conducted. Four opinion categories reflecting different attitudes toward climate change issues were identified: convinced planners, annoyed deniers, ambivalent optimists, convinced wait-and-seers. Although the findings generally indicate a growing awareness of climate change, this awareness is mainly limited to perceiving the issue as a global phenomenon. Awareness of regional and branch-specific consequences of climate change that lead to a demand for action could not be identified. Current technical strategies, like snowmaking, are not primarily climate-induced. At present, coping with climate change is not a priority for risk management. The findings point out the importance of gaining and transferring knowledge of regional and branch-specific consequences of climate change in order to induce action at the destination level. PMID:27064520

Integrated Network Analyses for Functional Genomic Studies in Cancer

PubMed Central

Wilson, Jennifer L.; Hemann, Michael T.; Fraenkel, Ernest; Lauffenburger, Douglas A.

2013-01-01

RNA-interference (RNAi) studies hold great promise for functional investigation of the significance of genetic variations and mutations, as well as potential synthetic lethalities, for understanding and treatment of cancer, yet technical and conceptual issues currently diminish the potential power of this approach. While numerous research groups are usefully employing this kind of functional genomic methodology to identify molecular mediators of disease severity, response, and resistance to treatment, findings are generally confounded by “off-target” effects. These effects arise from a variety of issues beyond non-specific reagent behavior, such as biological cross-talk and feedback processes so thus can occur even with specific perturbation. Interpreting RNAi results in a network framework instead of merely as individual “hits” or “targets” leverages contributions from all hit/target contributions to pathways via their relationships with other network nodes. This interpretation can ameliorate dependence on individual reagent performance and increase confidence in biological validation. Here we provide background on RNAi studies in cancer applications, review key challenges with functional genomics, and motivate the use of network models grounded in pathway analyses. PMID:23811269

Review of carbon dioxide research staffing and academic support

NASA Astrophysics Data System (ADS)

Clark, S. B.; Howard, L.; Stevenson, W.; Trice, J.

1985-04-01

More than 60 percent of the staff on Carbon Dioxide Research Division (CDRD) projects were university affiliated, and over one third of project scientists and engineers also had university teaching responsibilities. Almost 20 percent of project staff were students. CO2 research is unlikely to affect the general labor market for scientists and engineers because it uses such a small portion of the total pool. On the other hand, anticipated tight labor markets in some disciplines important to CO2 research may make it advantageous for CDRD to expand its support of university faculty, students, and staff to ensure that competent, knowledgeable researchers and managers are available for eventual policy decisions on CO2 issues. Options for academic support that lend themselves readily to the diffuse nature of CO2 research, while providing flexibility in the identification and accomplishment of specific programmatic objectives, include modifying procurement procedures for research contracts to enhance academic involvement, sponsoring summer institutes tailored to specific participants and focused on issues of interest to CDRD, and supporting traveling lecture programs designed to bring information of concern to CDRD to technical and nontechnical audiences.

The Vehicle Integrated Performance Analysis Experience: Reconnecting With Technical Integration

NASA Technical Reports Server (NTRS)

McGhee, D. S.

2006-01-01

Very early in the Space Launch Initiative program, a small team of engineers at MSFC proposed a process for performing system-level assessments of a launch vehicle. Aimed primarily at providing insight and making NASA a smart buyer, the Vehicle Integrated Performance Analysis (VIPA) team was created. The difference between the VIPA effort and previous integration attempts is that VIPA a process using experienced people from various disciplines, which focuses them on a technically integrated assessment. The foundations of VIPA s process are described. The VIPA team also recognized the need to target early detailed analysis toward identifying significant systems issues. This process is driven by the T-model for technical integration. VIPA s approach to performing system-level technical integration is discussed in detail. The VIPA process significantly enhances the development and monitoring of realizable project requirements. VIPA s assessment validates the concept s stated performance, identifies significant issues either with the concept or the requirements, and then reintegrates these issues to determine impacts. This process is discussed along with a description of how it may be integrated into a program s insight and review process. The VIPA process has gained favor with both engineering and project organizations for being responsive and insightful

GROUND WATER TECHNICAL SUPPORT CENTER

EPA Science Inventory

EPA's Office of Research and Development operates a Ground Water Technical Support Center (GWTSC). The Center provides support on issues regarding subsurface contamination, contaminant fluxes to other media (e.g., surface water or air), and ecosystem restoration. The GWTSC creat...

FRATIS concept of operations : assess test readiness of FRATIS (task 4).

DOT National Transportation Integrated Search

2012-08-01

This technical memorandum presents a concise assessment of the key technical and nontechnical issues and limitations related to field-testing the Freight Advanced Traveler Information System (FRATIS) Dynamic Mobility Applications (DMA) bundle and its...

75 FR 62096 - Agricultural Technical Advisory Committees for Trade in Tobacco, Cotton, Peanuts and Planting...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-07

... many of the issues that the GFO committee addresses, such as genetically modified organisms, new... modifying the existing structure of both the Agricultural Technical Advisory Committees (ATAC) for Trade in...

Thinking about Distributed Learning? Issues and Questions To Ponder.

ERIC Educational Resources Information Center

Sorg, Steven

2001-01-01

Introduces other articles in this issue devoted to distributed learning at metropolitan universities. Discusses issues that institutions should address if considering distributed learning: institutional goals and strategic plans, faculty development needs and capabilities, student support services, technical and personnel infrastructure, policies,…

CTE's Role in Urban Education. Issue Brief

ERIC Educational Resources Information Center

Association for Career and Technical Education (ACTE), 2012

2012-01-01

This Issue Brief explores the promising role that career and technical education programs play in addressing key student achievement issues facing urban schools. CTE programs engage urban students by providing rigorous and relevant coursework, fostering positive relationships, establishing clear pathways and connecting education and…

Scintillation screen applications in a vacuum arc ion source with composite hydride cathode

NASA Astrophysics Data System (ADS)

Wang, X. H.; Tuo, X. G.; Yang, Z.; Peng, Y. F.; Li, J.; Lv, H. Y.; Li, J. H.; Long, J. D.

2018-05-01

Vacuum arc ion source with composite hydride cathode was developed to produce intense ion beams which can be applied in particle accelerator injections. Beam profile and beam composition are two fundamental parameters of the beam for the vacuum arc ion source in such specific applications. An aluminum-coated scintillation screen with an ICCD camera readout was used to show the space-time distribution of the beam directly. A simple magnetic analysis assembly with the scintillation screen shows the beam composition information of this kind ion source. Some physical and technical issues are discussed and analyzed in the text.

Assessing the impact of modeling limits on intelligent systems

NASA Technical Reports Server (NTRS)

Rouse, William B.; Hammer, John M.

1990-01-01

The knowledge bases underlying intelligent systems are validated. A general conceptual framework is provided for considering the roles in intelligent systems of models of physical, behavioral, and operational phenomena. A methodology is described for identifying limits in particular intelligent systems, and the use of the methodology is illustrated via an experimental evaluation of the pilot-vehicle interface within the Pilot's Associate. The requirements and functionality are outlined for a computer based knowledge engineering environment which would embody the approach advocated and illustrated in earlier discussions. Issues considered include the specific benefits of this functionality, the potential breadth of applicability, and technical feasibility.

Gastroenterology-Urology Devices; Manual Gastroenterology-Urology Surgical Instruments and Accessories. Final rule; technical amendment.

PubMed

2017-03-01

The Food and Drug Administration (FDA) is amending the identification of manual gastroenterology-urology surgical instruments and accessories to reflect that the device does not include specialized surgical instrumentation for use with urogyencologic surgical mesh specifically intended for use as an aid in the insertion, placement, fixation, or anchoring of surgical mesh during urogynecologic procedures ("specialized surgical instrumentation for use with urogynecologic surgical mesh"). These amendments are being made to reflect changes made in the recently issued final reclassification order for specialized surgical instrumentation for use with urogynecologic surgical mesh.

Glossary on the environmental impact of a nuclear war. Technical note

DOE Office of Scientific and Technical Information (OSTI.GOV)

Verstraete, M.M.

1986-02-01

The glossary defines a number of words, expressions, and acronyms used in the description of the impact of nuclear war on the environment, and associated issues. Selected additional words related to the problems of armaments, disarmament, and nuclear war in general were also added for convenience, although terms and expressions specifically related to the medical aspects of the problem were not included. The glossary is an enlarged and updated version of the glossary that was published as part of the SCOPE-Enuwar study on the same subject, and published by Wiley (Pittock et al., 1986).

Technology assessment of human spaceflight - Combining philosophical and technical issues

NASA Astrophysics Data System (ADS)

Fromm, J.; Hoevelmann, G. H.

1992-08-01

A transutilitarian rationale is proposed for assessing human spaceflight that is based on objectives for these endeavors and ethical norms of conduct. Specific attention is given to: presupposed/tacit reasons for including man in spaceflight and the restricted notion of rational/justifiable activity. It is shown that economic rationale is insufficient and unsuitable as a means for assessing manned spaceflight, and transutilitarian objectives are compiled that contribute to the motivation for manned flight. The transutilitarian motivations include: pioneering uncharted territory, enhancing national prestige, establishing space-related autonomy, promoting international cooperation, and enhancing science and the quality of human life.

Rover nuclear rocket engine program: Overview of rover engine tests

NASA Technical Reports Server (NTRS)

Finseth, J. L.

1991-01-01

The results of nuclear rocket development activities from the inception of the ROVER program in 1955 through the termination of activities on January 5, 1973 are summarized. This report discusses the nuclear reactor test configurations (non cold flow) along with the nuclear furnace demonstrated during this time frame. Included in the report are brief descriptions of the propulsion systems, test objectives, accomplishments, technical issues, and relevant test results for the various reactor tests. Additionally, this document is specifically aimed at reporting performance data and their relationship to fuel element development with little or no emphasis on other (important) items.

The use of computer vision in an intelligent environment to support aging-in-place, safety, and independence in the home.

PubMed

Mihailidis, Alex; Carmichael, Brent; Boger, Jennifer

2004-09-01

This paper discusses the use of computer vision in pervasive healthcare systems, specifically in the design of a sensing agent for an intelligent environment that assists older adults with dementia during an activity of daily living. An overview of the techniques applied in this particular example is provided, along with results from preliminary trials completed using the new sensing agent. A discussion of the results obtained to date is presented, including technical and social issues that remain for the advancement and acceptance of this type of technology within pervasive healthcare.

Task Allocation for Single Pilot Operations: A Role for the Ground

NASA Technical Reports Server (NTRS)

Johnson, Walter; Lachter, Joel; Feary, Mike; Comerford, Doreen; Battiste, Vernol; Mogford, Richard

2012-01-01

Researchers at NASA Ames Research Center and NASA Langley Research Center are jointly investigating issues associated with potential configurations for an environment in which a single pilot, or reduced crew, might operate. The research summarized in this document represents several of the efforts being put forth at NASA Ames Research Center. Specifically, researchers at NASA Ames Research Center coordinated and hosted a technical interchange meeting in order to gain insight from members of the aviation community. A description of this meeting and the findings are presented first. Thereafter, plans for ensuing research are presented.

Managing the Soft Issues in E-Research: A Role for Libraries?

ERIC Educational Resources Information Center

Denison, Tom; Kethers, Stefanie; McPhee, Nicholas

2007-01-01

Within Australia there is a growing interest in e-research and the use of cyberinfrastructure. There is also increasing recognition that the use of cyberinfrastructure is often inhibited, not by technical issues, but by so-called "soft" issues, such as those related to work practices, intellectual property issues, the nature of research…

Genetic testing and genomic analysis: a debate on ethical, social and legal issues in the Arab world with a focus on Qatar.

PubMed

El Shanti, Hatem; Chouchane, Lotfi; Badii, Ramin; Gallouzi, Imed Eddine; Gasparini, Paolo

2015-11-14

In 2013 both Saudi Arabia and Qatar launched genome projects with the aim of providing information for better diagnosis, treatment and prevention of diseases and, ultimately to realize personalized medicine by sequencing hundred thousands samples. These population based genome activities raise a series of relevant ethical, legal and social issues general, related to the specific population structure as well as to the Islamic perspective on genomic analysis and genetic testing. To contribute to the debate, the Authors after reviewing the existing literature and taking advantage of their professional experience in the field and in the geographic area, discuss and provide their opinions. In particular, the Authors focus on the impact of consanguinity on population structure and disease frequency in the Arab world, on genetic testing and genomic analysis (i.e. technical aspects, impact, etc.) and on their regulations. A comparison between the Islamic perspective and the ethical, social and legal issues raised in other population contexts is also carried. In conclusion, this opinion article with an up-to-date contribution to the discussion on the relevance and impact of genomic analysis and genetic testing in the Arab world, might help in producing specific national guidelines on genetic testing and genomic analysis and help accelerate the implementation and roll out of genome projects in Muslim countries and more specifically in Qatar, and other countries of the Gulf.

45 CFR 162.920 - Availability of implementation specifications and operating rules.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Technical Report Type 3. The implementation specifications for the ASC X12N and the ASC X12 Standards for Electronic Data Interchange Technical Report Type 3 (and accompanying Errata or Type 1 Errata) may be... charged for all implementation specifications, including Technical Reports Type 3. Charging for such...

10 CFR 50.36a - Technical specifications on effluents from nuclear power reactors.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Technical specifications on effluents from nuclear power reactors. 50.36a Section 50.36a Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND...; Ineligibility of Certain Applicants § 50.36a Technical specifications on effluents from nuclear power reactors...

10 CFR 50.36a - Technical specifications on effluents from nuclear power reactors.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Technical specifications on effluents from nuclear power reactors. 50.36a Section 50.36a Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND...; Ineligibility of Certain Applicants § 50.36a Technical specifications on effluents from nuclear power reactors...

Delaware GK-12: Improvement of Science Education in Vocational Technical High Schools Through Collaborative Learning and Coteaching

NASA Astrophysics Data System (ADS)

Madsen, J.; Skalak, K.; Watson, G.; Scantlebury, K.; Allen, D.; Quillen, A.

2006-12-01

With funding from the National Science Foundation, the University of Delaware (UD) in partnership with the New Castle County Vocational Technical School District (NCCoVoTech) in Delaware has initiated a GK-12 Program. In each of year this program, nine full time UD graduate students in the sciences, who have completed all or most of their coursework, will be selected to serve as fellows. Participation in the GK-12 program benefits the graduate fellows in many ways. In addition to gaining general insight into current issues of science education, the fellows enhance their experience as scientific researchers by directly improving their ability to effectively communicate complex quantitative and technical knowledge to an audience with multiple and diverse learning needs. In the first year of this project, fellows have been paired with high school science teachers from NCCoVoTech. These pairs, along with the principal investigators (PIs) of this program have formed a learning community that is taking this opportunity to examine and to reflect on current issues in science education while specifically addressing critical needs in teaching science in vocational technical high schools. By participating in summer workshops and follow-up meetings facilitated by the PIs, the fellows have been introduced to a number of innovative teaching strategies including problem-based learning (PBL). Fellow/teacher pairs have begun to develop and teach PBL activities that are in agreement with State of Delaware science standards and that support student learning through inquiry. Fellows also have the opportunity to engage in coteaching with their teacher partner. In this "teaching at the elbow of another", fellows will gain a better understanding of and appreciation for the complexities and nuances of teaching science in vocational technical high schools. While not taught as a stand-alone course in NCCoVoTech high schools, earth science topics are integrated into the science curriculum at nearly all levels from the freshman through the senior year. Three of the current group of nine fellows are engaged in Ph.D.-level research within the disciplines of astronomy and hydrology. They will bring this expertise into their collaboration with their practicing teachers with the goal of improving the understanding of earth science topics by high school students within a vocational technical school setting.

Overview of Variable Renewable Energy Regulatory Issues: A Clean Energy Regulators Initiative Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, M.; Cox, S.

This CERI report aims to provide an introductory overview of key regulatory issues associated with the deployment of renewable energy -- particularly variable renewable energy (VRE) sources such wind and solar power. The report draws upon the research and experiences from various international contexts, and identifies key ideas that have emerged from the growing body of VRE deployment experience and regulatory knowledge. The report assumes basic familiarity with regulatory concepts, and although it is not written for a technical audience, directs the reader to further reading when available. VRE deployment generates various regulatory issues: substantive, procedural, and public interest issues,more » and the report aims to provide an empirical and technical grounding for all three types of questions as appropriate.« less

Data issues in the life sciences.

PubMed

Thessen, Anne E; Patterson, David J

2011-01-01

We review technical and sociological issues facing the Life Sciences as they transform into more data-centric disciplines - the "Big New Biology". Three major challenges are: 1) lack of comprehensive standards; 2) lack of incentives for individual scientists to share data; 3) lack of appropriate infrastructure and support. Technological advances with standards, bandwidth, distributed computing, exemplar successes, and a strong presence in the emerging world of Linked Open Data are sufficient to conclude that technical issues will be overcome in the foreseeable future. While motivated to have a shared open infrastructure and data pool, and pressured by funding agencies in move in this direction, the sociological issues determine progress. Major sociological issues include our lack of understanding of the heterogeneous data cultures within Life Sciences, and the impediments to progress include a lack of incentives to build appropriate infrastructures into projects and institutions or to encourage scientists to make data openly available.

Data issues in the life sciences

PubMed Central

Thessen, Anne E.; Patterson, David J.

2011-01-01

Abstract We review technical and sociological issues facing the Life Sciences as they transform into more data-centric disciplines - the “Big New Biology”. Three major challenges are: 1) lack of comprehensive standards; 2) lack of incentives for individual scientists to share data; 3) lack of appropriate infrastructure and support. Technological advances with standards, bandwidth, distributed computing, exemplar successes, and a strong presence in the emerging world of Linked Open Data are sufficient to conclude that technical issues will be overcome in the foreseeable future. While motivated to have a shared open infrastructure and data pool, and pressured by funding agencies in move in this direction, the sociological issues determine progress. Major sociological issues include our lack of understanding of the heterogeneous data cultures within Life Sciences, and the impediments to progress include a lack of incentives to build appropriate infrastructures into projects and institutions or to encourage scientists to make data openly available. PMID:22207805

Technical flaws in multiple-choice questions in the access exam to medical specialties ("examen MIR") in Spain (2009-2013).

PubMed

Rodríguez-Díez, María Cristina; Alegre, Manuel; Díez, Nieves; Arbea, Leire; Ferrer, Marta

2016-02-03

The main factor that determines the selection of a medical specialty in Spain after obtaining a medical degree is the MIR ("médico interno residente", internal medical resident) exam. This exam consists of 235 multiple-choice questions with five options, some of which include images provided in a separate booklet. The aim of this study was to analyze the technical quality of the multiple-choice questions included in the MIR exam over the last five years. All the questions included in the exams from 2009 to 2013 were analyzed. We studied the proportion of questions including clinical vignettes, the number of items related to an image and the presence of technical flaws in the questions. For the analysis of technical flaws, we adapted the National Board of Medical Examiners (NBME) guidelines. We looked for 18 different issues included in the manual, grouped into two categories: issues related to testwiseness and issues related to irrelevant difficulties. The final number of questions analyzed was 1,143. The percentage of items based on clinical vignettes increased from 50% in 2009 to 56-58% in the following years (2010-2013). The percentage of items based on an image increased progressively from 10% in 2009 to 15% in 2012 and 2013. The percentage of items with at least one technical flaw varied between 68 and 72%. We observed a decrease in the percentage of items with flaws related to testwiseness, from 30% in 2009 to 20% in 2012 and 2013. While most of these issues decreased dramatically or even disappeared (such as the imbalance in the correct option numbers), the presence of non-plausible options remained frequent. With regard to technical flaws related to irrelevant difficulties, no improvement was observed; this is especially true with respect to negative stem questions and "hinged" questions. The formal quality of the MIR exam items has improved over the last five years with regard to testwiseness. A more detailed revision of the items submitted, checking systematically for the presence of technical flaws, could improve the validity and discriminatory power of the exam, without increasing its difficulty.

Defense Acquisition Research Journal. Volume 24, Number 1, Issue 80, January 2017

DTIC Science & Technology

2017-01-01

call 703-960-6802 or 800-755-8805, or e-mail dauaa2@aol.com. ISSUE 80 JANUARY 2017 VOL. 24 NO. 1 1 We’re on the Web at: http://www.dau.mil...technical proposals, use white papers as an initial screen- ing process. The initial screening based solely on technical merit will help industry and...mda.mil) Dr. Thomas A . Mazzuchi is cha ir of the Department of Engineering Management and Systems Engineering in the School of Engineering and Applied

Control of Technology Transfer at JPL

NASA Technical Reports Server (NTRS)

Oliver, Ronald

2006-01-01

Controlled Technology: 1) Design: preliminary or critical design data, schematics, technical flow charts, SNV code/diagnostics, logic flow diagrams, wirelist, ICDs, detailed specifications or requirements. 2) Development: constraints, computations, configurations, technical analyses, acceptance criteria, anomaly resolution, detailed test plans, detailed technical proposals. 3) Production: process or how-to: assemble, operated, repair, maintain, modify. 4) Manufacturing: technical instructions, specific parts, specific materials, specific qualities, specific processes, specific flow. 5) Operations: how-to operate, contingency or standard operating plans, Ops handbooks. 6) Repair: repair instructions, troubleshooting schemes, detailed schematics. 7) Test: specific procedures, data, analysis, detailed test plan and retest plans, detailed anomaly resolutions, detailed failure causes and corrective actions, troubleshooting, trended test data, flight readiness data. 8) Maintenance: maintenance schedules and plans, methods for regular upkeep, overhaul instructions. 9) Modification: modification instructions, upgrades kit parts, including software

Bibliography of Lewis Research Center technical publications announced in 1982

NASA Technical Reports Server (NTRS)

1983-01-01

The technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1982 is described. All the publications were announced in the 1982 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

75 FR 9203 - Guidance on Preparation of Market-Based Rate Filings and Electric Quarterly Reports by Public...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-01

... Preparation of Market-Based Rate Filings and Electric Quarterly Reports by Public Utilities; Supplemental Notice of Technical Conference February 22, 2010. As announced in the ``Notice of Technical Conference'' issued on January 28, 2010, a technical conference will be held on March 3, 2010, from 9 a.m. to 3 p.m...

Diversity in Career and Technical Education On-Line Classrooms: Considering Issues of Gender, Race and Age

ERIC Educational Resources Information Center

Ware, Mary C.; Stuck, Mary F.

2010-01-01

Designers and instructors of courses in career and technical education have realized the value of on-line delivery of instruction during the past several decades. Many students enrolled in career and technical education courses are what have been labeled "non-traditional" students. On-line learning is helpful to these students because it…

The Changing Role of Vocational and Technical Education and Training (VOTEC). Women in Vocational and Technical Education: Changes and Challenges.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

Changes in the vocational and technical education (VTE) opportunities available for women in Organisation for Economic Cooperation Development (OECD) member countries in response to changing labor markets and job skill requirements were discussed at a June 1994 meeting of experts. The discussions focused on the following issues: gender differences…

76 FR 67725 - Technical Conference on Penalty Guidelines; Second Notice of Technical Conference on Penalty...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-02

... Conference on Penalty Guidelines; Second Notice of Technical Conference on Penalty Guidelines On September 21... Conference on Penalty Guidelines to be held on November 17, 2011. The conference will be held from 1 p.m. to... impact of the Penalty Guidelines, which the Commission issued on September 17, 2010,\\1\\ on compliance and...

77 FR 3766 - PJM Interconnection, L.L.C.; Notice of Staff Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... Interconnection, L.L.C.; Notice of Staff Technical Conference On December 14, 2011, the Commission issued an order... Interconnection, L.L.C.'s (PJM) filing.\\1\\ Take notice that the technical conference will be held on February 14...\\ PJM Interconnection, L.L.C., 137 FERC ] 61,204 (2011) (December 14 Order). All interested parties are...

American College of Radiology-American Brachytherapy Society practice parameter for electronically generated low-energy radiation sources.

PubMed

Devlin, Phillip M; Gaspar, Laurie E; Buzurovic, Ivan; Demanes, D Jeffrey; Kasper, Michael E; Nag, Subir; Ouhib, Zoubir; Petit, Joshua H; Rosenthal, Seth A; Small, William; Wallner, Paul E; Hartford, Alan C

This collaborative practice parameter technical standard has been created between the American College of Radiology and American Brachytherapy Society to guide the usage of electronically generated low energy radiation sources (ELSs). It refers to the use of electronic X-ray sources with peak voltages up to 120 kVp to deliver therapeutic radiation therapy. The parameter provides a guideline for utilizing ELS, including patient selection and consent, treatment planning, and delivery processes. The parameter reviews the published clinical data with regard to ELS results in skin, breast, and other cancers. This technical standard recommends appropriate qualifications of the involved personnel. The parameter reviews the technical issues relating to equipment specifications as well as patient and personnel safety. Regarding suggestions for educational programs with regard to this parameter,it is suggested that the training level for clinicians be equivalent to that for other radiation therapies. It also suggests that ELS must be done using the same standards of quality and safety as those in place for other forms of radiation therapy. Copyright © 2017 American Brachytherapy Society and American College of Radiology. Published by Elsevier Inc. All rights reserved.

UAS Integration into the NAS Project

NASA Technical Reports Server (NTRS)

Bauer, Jeff

2010-01-01

The goal of the UAS Integration in the NAS Project is to contribute capabilities that reduce technical barriers related to the safety and operational challenges associated with enabling routine UAS access to the NAS This goal will be accomplished through a two-phased approach of system-level integration of key concepts, technologies and/or procedures, and demonstrations of integrated capabilities in an operationally relevant environment. Technical objectives include: PHASE 1: a) Validating the key technical areas identified by this project. System-level analyses, a State of the Art Analysis (SOAA), and a ConOps will identify the challenges and barriers preventing routine UAS access to the NAS. b) Developing a national roadmap and gap analysis identifying specific deliverables in the area of operations, procedures, and technologies that will impact future policy decisions. PHASE 2: a) Provide regulators with a methodology for developing airworthiness requirements for UAS and data to support development of certifications standards and regulatory guidance. b) Provide systems-level integrated testing of concepts and/or capabilities that address barriers to routine access to the NAS. Through simulation and flight testing, address issues including separation assurance, communications requirements, and Pilot Aircraft Interfaces (PAIs) in operationally relevant environments

Comparison study of the technical characteristics and financial analysis of electric battery storage systems for residential grid

NASA Astrophysics Data System (ADS)

Palivos, Marios; Vokas, Georgios A.; Anastasiadis, Anestis; Papageorgas, Panagiotis; Salame, Chafic

2018-05-01

One of the major energy issues of our days is reliable and effective energy generation and supply of electricity grids. In recent years there has been experienced a rapid development and implementation of Renewable Energy Sources (RES) worldwide. On one hand, many Gigawatts of grid-connected renewables are being installed and on the other many Megawatts of hybrid renewable systems for residential use are being installed making use of electric battery systems, in order to cover all daily energy and power needs during. New types of batteries are being developed and many companies have made great progress providing a variety of electricity storage products. The purpose of this research is firstly to highlight the necessity and also the importance of the use of energy storage systems and secondly, through detailed technical and financial simulation analysis using HOMER Pro-optimization software, to compare the technical characteristics and performance of energy storage systems by various leading companies when installed in a residential renewable energy system with a specific load and at the same time to provide the most efficient system economically. Results concerning the operation and the choice of a storage system are derived.

New two-tier low pressure turbine for heavy duty steam turbines

NASA Astrophysics Data System (ADS)

Zaryankin, A. E.; Rogalev, A. N.; Osipov, S. K.; Bychkov, N. M.

2017-11-01

Among factors characterising steam turbine units of power plants, a specific metal content which value decreases inversely to turbine power is of substantive importance. In turn, their maximum power depends on the capacity of low pressure turbines. It is traditionally managed to increase either by installation of larger number of low pressure turbines or by lengthening the exhaust blades. It is worth noting that the above-mentioned methods have some technical restrictions by the number of rotors to be connected. Currently some works aimed at solving the stated technical problems appear in the literature for the purpose of increasing the unit power of turbomachines, for example, by using exhaust blades with the length of 1 500 mm and longer. However, it is to be understood that increasing the exhaust area of turbomachine only by lengthening exhaust blades cannot provide a cost-effective and reliable work of the turbine flow part. Here new problems appear: losses rise abruptly due to the stage fan-out, the turbomachine dimensions increase, etc. In this connection, an issue of development of new, technically implementable ways of turbo-units power increase is very acute today.

Intracellular magnesium detection by fluorescent indicators.

PubMed

Trapani, Valentina; Schweigel-Röntgen, Monika; Cittadini, Achille; Wolf, Federica I

2012-01-01

Magnesium is essential for a wide variety of biochemical reactions and physiological functions, but its regulatory mechanisms (both at the cellular and at the systemic level) are still poorly characterized. Not least among the reasons for this gap are the technical difficulties in sensing minor changes occurring over a high background concentration. Specific fluorescent indicators are highly sensitive tools for dynamic evaluation of intracellular magnesium concentration. We herein discuss the main criteria to consider when choosing a magnesium-specific fluorescent indicator and provide examples among commercial as well as developmental sensors. We focus on spectrofluorimetric approaches to quantify Mg(2+) concentration in cell or mitochondria suspensions, and on imaging techniques to detect intracellular magnesium distribution and fluxes by live microscopy, reporting a detailed description of standard protocols for each method. The general guidelines we provide should be applicable to specific issues by any researcher in the field. Copyright © 2012 Elsevier Inc. All rights reserved.

Prototype design for a predictive model to improve evacuation operations : technical report.

DOT National Transportation Integrated Search

2011-08-01

Mass evacuations of the Texas Gulf Coast remain a difficult challenge. These events are massive in scale, : highly complex, and entail an intricate, ever-changing conglomeration of technical and jurisdictional issues. : This project focused primarily...

Regulatory and technical reports (abstract index journal): Annual compilation for 1996, Volume 21, No. 4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheehan, M.A.

1997-04-01

This compilation is the annual cumulation of bibliographic data and abstracts for the formal regulatory and technical reports issued by the U.S. Nuclear Regulatory Commission (NRC) Staff and its contractors.

Bibliography of Lewis Research Center Technical Publications announced in 1978

NASA Technical Reports Server (NTRS)

1979-01-01

All the publications were announced in the 1978 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

TU-G-201-01: What Therapy Physicists Need to Know About CT and PET/CT: Terminology and Latest Developments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hua, C.

This session will update therapeutic physicists on technological advancements and radiation oncology features of commercial CT, MRI, and PET/CT imaging systems. Also described are physicists’ roles in every stage of equipment selection, purchasing, and operation, including defining specifications, evaluating vendors, making recommendations, and optimal and safe use of imaging equipment in radiation oncology environment. The first presentation defines important terminology of CT and PET/CT followed by a review of latest innovations, such as metal artifact reduction, statistical iterative reconstruction, radiation dose management, tissue classification by dual energy CT and spectral CT, improvement in spatial resolution and sensitivity in PET, andmore » potentials of PET/MR. We will also discuss important technical specifications and items in CT and PET/CT purchasing quotes and their impacts. The second presentation will focus on key components in the request for proposal for a MRI simulator and how to evaluate vendor proposals. MRI safety issues in radiation Oncology, including MRI scanner Zones (4-zone design), will be discussed. Basic MR terminologies, important functionalities, and advanced features, which are relevant to radiation therapy, will be discussed. In the third presentation, justification of imaging systems for radiation oncology, considerations in room design and construction in a RO department, shared use with diagnostic radiology, staffing needs and training, clinical/research use cases and implementation, will be discussed. The emphasis will be on understanding and bridging the differences between diagnostic and radiation oncology installations, building consensus amongst stakeholders for purchase and use, and integrating imaging technologies into the radiation oncology environment. Learning Objectives: Learn the latest innovations of major imaging systems relevant to radiation therapy Be able to describe important technical specifications of CT, MRI, and PET/CT Understand the process of budget request, equipment justification, comparisons of technical specifications, site visits, vendor selection, and contract development.« less

TU-G-201-02: An MRI Simulator From Proposal to Operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cao, Y.

2015-06-15

This session will update therapeutic physicists on technological advancements and radiation oncology features of commercial CT, MRI, and PET/CT imaging systems. Also described are physicists’ roles in every stage of equipment selection, purchasing, and operation, including defining specifications, evaluating vendors, making recommendations, and optimal and safe use of imaging equipment in radiation oncology environment. The first presentation defines important terminology of CT and PET/CT followed by a review of latest innovations, such as metal artifact reduction, statistical iterative reconstruction, radiation dose management, tissue classification by dual energy CT and spectral CT, improvement in spatial resolution and sensitivity in PET, andmore » potentials of PET/MR. We will also discuss important technical specifications and items in CT and PET/CT purchasing quotes and their impacts. The second presentation will focus on key components in the request for proposal for a MRI simulator and how to evaluate vendor proposals. MRI safety issues in radiation Oncology, including MRI scanner Zones (4-zone design), will be discussed. Basic MR terminologies, important functionalities, and advanced features, which are relevant to radiation therapy, will be discussed. In the third presentation, justification of imaging systems for radiation oncology, considerations in room design and construction in a RO department, shared use with diagnostic radiology, staffing needs and training, clinical/research use cases and implementation, will be discussed. The emphasis will be on understanding and bridging the differences between diagnostic and radiation oncology installations, building consensus amongst stakeholders for purchase and use, and integrating imaging technologies into the radiation oncology environment. Learning Objectives: Learn the latest innovations of major imaging systems relevant to radiation therapy Be able to describe important technical specifications of CT, MRI, and PET/CT Understand the process of budget request, equipment justification, comparisons of technical specifications, site visits, vendor selection, and contract development.« less

Analysis of Technical Specifications of the Egyptian and French Electronic Storybooks (e-Storybook)

ERIC Educational Resources Information Center

Atta, Mohammed Mahmoud; Abd El Wahab, Shaimaa Mahmoud

2015-01-01

This research aims at analysing technical specifications in a sample of Egyptian and French electronic storybooks (e-storybooks), to identify similarities and differences in technical specifications of children's e-storybooks and create a verified analysis list to be used for evaluation of e-storybooks. For this purpose, 32 e-storybooks in CD…

Assessment of distributed solar power systems: Issues and impacts

NASA Astrophysics Data System (ADS)

Moyle, R. A.; Chernoff, H.; Schweizer, T. C.; Patton, J. B.

1982-11-01

The installation of distributed solar-power systems presents electric utilities with a host of questions. Some of the technical and economic impacts of these systems are discussed. Among the technical interconnect issues are isolated operation, power quality, line safety, and metering options. Economic issues include user purchase criteria, structures and installation costs, marketing and product distribution costs, and interconnect costs. An interactive computer program that allows easy calculation of allowable system prices and allowable generation-equipment prices was developed as part of this project. It is concluded that the technical problems raised by distributed solar systems are surmountable, but their resolution may be costly. The stringent purchase criteria likely to be imposed by many potential system users and the economies of large-scale systems make small systems (less than 10 to 20 kW) less attractive than larger systems. Utilities that consider life-cycle costs in making investment decisions and third-party investors who have tax and financial advantages are likely to place the highest value on solar-power systems.

Computer Security Issues in Online Banking: An Assessment from the Context of Usable Security

NASA Astrophysics Data System (ADS)

Mahmadi, FN; Zaaba, ZF; Osman, A.

2016-11-01

Today's online banking is a convenient mode of finance management. Despite the ease of doing online banking, there are people that still sceptical in utilizing it due to perception and its security. This paper highlights the subject of online banking security in Malaysia, especially from the perspective of the end-users. The study is done by assessing human computer interaction, usability and security. An online survey utilising 137 participants was previously conducted to gain preliminary insights on security issues of online banking in Malaysia. Following from those results, 37 participants were interviewed to gauge deeper understanding about end-users perception on online banking within the context of usable security. The results suggested that most of the end-users are continuingly experiencing significant difficulties especially in relation to the technical terminologies, security features and other technical issues. Although the security features are provided to provide a shield or protection, users are still incapable to cope with the technical aspects of such implementation.

Contraband detection using acoustic technology

NASA Astrophysics Data System (ADS)

George, Robert D.; Gauthier, Ronald D.; Denslow, Kayte D.; Cinson, Anthony M.; Diaz, Aaron A.; Griffin, Molly

2008-03-01

Maritime security personnel have a need for advanced technologies to address issues such as identification, confirmation or classification of substances and materials in sealed containers, both non-invasively and nondestructively in field and first response operations. Such substances include items such as hazardous/flammable liquids, drugs, contraband, and precursor chemicals used in the fabrication of illicit materials. Our initial efforts focused specifically on a commercial portable acoustic detector technology that was evaluated under operational conditions in a maritime environment. Technical/operational limitations were identified and enhancements were incorporated that would address these limitations. In this paper, application-specific improvements and performance testing/evaluation results will be described. Such enhancements will provide personnel/users of the detector a significantly more reliable method of screening materials for contraband items that might be hidden in cargo containers.

Communities' readiness for health information exchange: the National Landscape in 2004.

PubMed

Overhage, J Marc; Evans, Lori; Marchibroda, Janet

2005-01-01

The Secretary of Health and Human Services recently released a report calling for the nation to create a national health information network (NHIN) that would interconnect Regional Health Information Organizations (RHIOs). These RHIOs, which others have called Local or Regional Health Information Infrastructures (LHII), would in turn interconnect local as well as national health information resources. Little data exist about the activities taking place in communities to create LHIIs. The authors analyzed data that communities submitted in response to a request for capabilities issued by the Foundation for eHealth as part of their Connecting Communities for Better Health program using descriptive statistics and subjective evaluation. The authors analyzed data from 134 responses from communities in 42 states and the District of Columbia. Communities are enthusiastic about moving forward with health information exchange to create LHIIs to improve the efficiency, quality, and safety of care. They have identified significant local sources of investment and plan to use some clinical data standards but not as broadly as was expected. The communities have not yet developed the specific technical approaches or the sustainable business models that will be required. Many communities are interested in creating an LHII and are developing the leadership commitment needed to translate that interest into an operational reality. Clinical information standards can be incorporated into a community's plans as often as they need to be. Communities have to overcome funding issues, develop deeper understanding of the technical and organizational issues, and aggressively share their learning to succeed within their community and to help other communities succeed.

The Virtual Orchestra: Technical and Creative Issues

NASA Astrophysics Data System (ADS)

BIANCHI, F. W.; CAMPBELL, R. H.

2000-04-01

The interactive multi-channel computer music system known as the Virtual Orchestra has been used several times in professional opera and theater as an alternative to a live pit orchestra. The technical issues associated with this emerging technology, and the logistical problems of implementing it are discussed. In addition, this paper describes the equally important issues regarding the creative impact this will have on the industry. In particular, this paper explores the role of the musician/technologist and suggests that many of the fundamental premises of opera production will change as the industry begins to retool. This would include the way opera is rehearsed and performed, how it is created and disseminated, and how it will adjust to changing demographics.

Enhancing U.S. competitiveness through federal scientific and technical information - Issues and opportunities

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.

1990-01-01

The possibility of using federally funded scientific and technical information (STI) to increase U.S. industrial innovation and productivity is discussed. The history of federally funded research and development in the fields of agriculture and aviation is reviewed as an example of successful government-sponsored research. Issues related to the production and utilization of information are considered and federal STI policy is outlined. Issues related to the transfer of knowledge between government agencies and industry are examined and a model depicting the transfer of STI in aerospace research and development is presented. Also, consideration is given to the problem of open communication versus restricted access to STI.

Building a COTS archive for satellite data

NASA Technical Reports Server (NTRS)

Singer, Ken; Terril, Dave; Kelly, Jack; Nichols, Cathy

1994-01-01

The goal of the NOAA/NESDIS Active Archive was to provide a method of access to an online archive of satellite data. The archive had to manage and store the data, let users interrogate the archive, and allow users to retrieve data from the archive. Practical issues of the system design such as implementation time, cost and operational support were examined in addition to the technical issues. There was a fixed window of opportunity to create an operational system, along with budget and staffing constraints. Therefore, the technical solution had to be designed and implemented subject to constraint imposed by the practical issues. The NOAA/NESDIS Active Archive came online in July of 1994, meeting all of its original objectives.

Non-technical Issues in Design and Development of Personal Portable Devices.

PubMed

Lhotska, Lenka; Cheshire, Paul; Pharow, Peter; Macku, David

2016-01-01

Mobile technologies are constantly evolving and with the development of Internet of Things we can expect continuous increase of various applications. Mobile technologies have undeniable opportunities to play an important role in health services. Concerning purely technical aspects, almost every problem can be solved. However, there are still many unsolved and unclear issues related with ethics and governance mechanisms for mobile phone applications. These issues are even more critical in medical and health care applications of mobile technologies. This paper tries to analyse ethical, and privacy-related challenges that may occur when introducing Personal Portable Devices (PPD) to collect and record personal health data in health care and welfare environment.

Crew Transportation Technical Standards and Design Evaluation Criteria

NASA Technical Reports Server (NTRS)

Lueders, Kathryn L.; Thomas, Rayelle E. (Compiler)

2015-01-01

Crew Transportation Technical Standards and Design Evaluation Criteria contains descriptions of technical, safety, and crew health medical processes and specifications, and the criteria which will be used to evaluate the acceptability of the Commercial Providers' proposed processes and specifications.

Challenges to global measles eradication: is it all in the timing?

PubMed

Davis, Robert; Mbabazi, William Baguma

2017-01-01

The case for global eradication of measles was first made in 1982. Since then, technical aspects of measles eradication have concluded that measles satisfied all criteria required for eradication. To date, only smallpox, among human diseases, has been eradicated, with polio, the next eradication candidate. In all previous eradication programmes, the pattern of slow implementation and missed deadlines is similar. Lessons from these past eradication programs should inform development of a time-limited measles eradication program. Notably, no measles eradication resolution is likely until member states are satisfied that polio eradication is accomplished. However, there is an impetus for measles eradication from the western hemisphere, where governments continue to pay the high costs of keeping their region measles free until global measles eradication is achieved. While previous vaccine preventable diseases eradications have depended on supplemental immunizations (SIAs), measles eradication will have to build both on SIAs and routine immunization systems strengthening. This article reviews non-technical considerations that could facilitate the delivery of a time-limited measles eradication initiative. The issues discussed are categorized as a) specificities of measles disease; b) specifics of measles vaccine/vaccination; c) special considerations for endemic countries and d) organization of international partnerships. The disease and vaccine specific issues are not insurmountable. The introduction of routine measles second dose, in the context of EPI systems strengthening, is paramount to endemic developing countries. In the international partnerships, it should be noted that i) Measles eradication will be easier and cheaper; ii) the return on investment is compelling; iii) leverage is feasible on the experiences of the Measles/Rubella initiative; iv) two disease eradication targets in one initiative are feasible and v) for the first time, an eradication investment case will inform the decisions. However, if previous eradication efforts have been marathons, measles eradication will need to be a sprint.

Challenges to global measles eradication: is it all in the timing?

PubMed Central

Davis, Robert; Mbabazi, William Baguma

2017-01-01

The case for global eradication of measles was first made in 1982. Since then, technical aspects of measles eradication have concluded that measles satisfied all criteria required for eradication. To date, only smallpox, among human diseases, has been eradicated, with polio, the next eradication candidate. In all previous eradication programmes, the pattern of slow implementation and missed deadlines is similar. Lessons from these past eradication programs should inform development of a time-limited measles eradication program. Notably, no measles eradication resolution is likely until member states are satisfied that polio eradication is accomplished. However, there is an impetus for measles eradication from the western hemisphere, where governments continue to pay the high costs of keeping their region measles free until global measles eradication is achieved. While previous vaccine preventable diseases eradications have depended on supplemental immunizations (SIAs), measles eradication will have to build both on SIAs and routine immunization systems strengthening. This article reviews non-technical considerations that could facilitate the delivery of a time-limited measles eradication initiative. The issues discussed are categorized as a) specificities of measles disease; b) specifics of measles vaccine/vaccination; c) special considerations for endemic countries and d) organization of international partnerships. The disease and vaccine specific issues are not insurmountable. The introduction of routine measles second dose, in the context of EPI systems strengthening, is paramount to endemic developing countries. In the international partnerships, it should be noted that i) Measles eradication will be easier and cheaper; ii) the return on investment is compelling; iii) leverage is feasible on the experiences of the Measles/Rubella initiative; iv) two disease eradication targets in one initiative are feasible and v) for the first time, an eradication investment case will inform the decisions. However, if previous eradication efforts have been marathons, measles eradication will need to be a sprint. PMID:29296146

Dependability of technical items: Problems of standardization

NASA Astrophysics Data System (ADS)

Fedotova, G. A.; Voropai, N. I.; Kovalev, G. F.

2016-12-01

This paper is concerned with problems blown up in the development of a new version of the Interstate Standard GOST 27.002 "Industrial product dependability. Terms and definitions". This Standard covers a wide range of technical items and is used in numerous regulations, specifications, standard and technical documentation. A currently available State Standard GOST 27.002-89 was introduced in 1990. Its development involved a participation of scientists and experts from different technical areas, its draft was debated in different audiences and constantly refined, so it was a high quality document. However, after 25 years of its application it's become necessary to develop a new version of the Standard that would reflect the current understanding of industrial dependability, accounting for the changes taking place in Russia in the production, management and development of various technical systems and facilities. The development of a new version of the Standard makes it possible to generalize on a terminological level the knowledge and experience in the area of reliability of technical items, accumulated over a quarter of the century in different industries and reliability research schools, to account for domestic and foreign experience of standardization. Working on the new version of the Standard, we have faced a number of issues and problems on harmonization with the International Standard IEC 60500-192, caused first of all by different approaches to the use of terms and differences in the mentalities of experts from different countries. The paper focuses on the problems related to the chapter "Maintenance, restoration and repair", which caused difficulties for the developers to harmonize term definitions both with experts and the International Standard, which is mainly related to differences between the Russian concept and practice of maintenance and repair and foreign ones.

75 FR 44968 - Office of the Secretary, Office of the Assistant Secretary for Planning and Evaluation; Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-30

... Trustees) establish a panel of technical experts to review the methods used in the HI and SMI annual... care, and alternate projection methodologies. The panel may also examine other methodological issues...

30 CFR 7.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... was issued. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group... this part. Applicant. An individual or organization that manufactures or controls the assembly of a... technical requirements and have been manufactured as approved. Technical requirements. The design and...

30 CFR 7.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... was issued. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group... this part. Applicant. An individual or organization that manufactures or controls the assembly of a... technical requirements and have been manufactured as approved. Technical requirements. The design and...

30 CFR 7.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... was issued. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group... this part. Applicant. An individual or organization that manufactures or controls the assembly of a... technical requirements and have been manufactured as approved. Technical requirements. The design and...

30 CFR 7.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... was issued. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group... this part. Applicant. An individual or organization that manufactures or controls the assembly of a... technical requirements and have been manufactured as approved. Technical requirements. The design and...

30 CFR 7.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... was issued. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group... this part. Applicant. An individual or organization that manufactures or controls the assembly of a... technical requirements and have been manufactured as approved. Technical requirements. The design and...

Advancing Free Flight Through Human Factors: Workshop Report

DOT National Transportation Integrated Search

1995-08-01

This report describes the results of the Advancing Free Flight Through Human : Factors technical workshop held on June 20 and 21, 1995. The purpose of this : technical workshop was to begin the process of identifying and solving human : factors issue...

Solar Technical Assistance Team (STAT) (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Solar Technical Assistance Team (STAT) is a team of solar technology and deployment experts who ensure that the best information on policies, regulations, financing, and other issues is getting into the hands of state government decision makers when they need it.

76 FR 39870 - PJM Interconnection, LLC; PJM Power Providers Group v. PJM Interconnection, LLC; Notice of Date...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

... Date for Staff Technical Conference and Related Information On June 13, 2011, the Commission issued an... headquarters, 888 First Street, NE. The technical conference will be led by Commission staff, however...

Ethical and Professional Issues in Career Assessment on the Internet.

ERIC Educational Resources Information Center

Barak, Azy

2003-01-01

Concerns about Internet-based career assessments include the following: users' technical skill level, lack of screening, psychological factors, cultural bias, unprotected results, technical failures, lack of standardization, digital divide, interpretation problems, outdated tests, copyright violations, administrator qualifications, and hidden…

Issues in Electronic Publishing.

ERIC Educational Resources Information Center

Meadow, Charles T.

1997-01-01

Discusses issues related to electronic publishing. Topics include writing; reading; production, distribution, and commerce; copyright and ownership of intellectual property; archival storage; technical obsolescence; control of content; equality of access; and cultural changes. (Author/LRW)

Introduction

Treesearch

Sheila E. Ward; David Boshier; James Grogan

2008-01-01

This special issue of Forest Ecology and Management addresses management issues for the tropical timber species of the Meliaceae. The concept for this issue originated from a technical session entitled ..Sustainable management of highvalue timber species of the Meliaceae: a global perspective.., held at the 2005 World Congress of the International Union of Forest...

Higher Education in TAFE: An Issues Paper

ERIC Educational Resources Information Center

Moodie, Gavin; Wheelahan, Leesa; Billett, Stephen; Kelly, Ann

2009-01-01

Growth in mixed-sector institutions offering both vocational and higher education qualifications is expected to increase given recent and predicted policy changes. This issues paper focuses on the provision and management of higher education in technical and further education (TAFE) institutes. Issues raised for discussion include the governance…

ERCMExpress. Volume 3, Issue 2

ERIC Educational Resources Information Center

Schonfeld, David J.

2007-01-01

The Emergency Response and Crisis Management (ERCM) Technical Assistance Center's newsletter, "ERCMExpress," provides comprehensive information on key issues in school emergency management. This issue of "ERCMExpress," titled "Coping with the Death of a Student or Staff Member," highlights the range of impact death can have on a school community;…

Health care quality: from data to accountability.

PubMed

Darby, M

1998-08-01

The many audiences for information about the quality of health care have different and sometimes conflicting interests and priorities. This is reflected in the diversity of current efforts to use health care data to identify, measure, and demonstrate quality. The author surveys three of these approaches in depth: (1) the professional approach, which relies on the actions of private-sector accreditation groups, trade associations and health plans, hospitals, and other providers to assure quality; (2) the market-driven approach, which relies on the use of quality data by health care purchasers and consumers in choosing plans and providers; and (3) the public-sector approach, which relies on the regulatory, oversight, and purchasing actions of government at the federal, state, and local levels to assure quality. The author concludes that efforts to measure and report the quality of health care invariably confront a variety of technical and political issues. Several observers maintain that it is more important for participants in quality issues to reach consensus on the issues than to reach technical perfection in the way the data are handled. Important obstacles in the technical realm include inadequate investment in sufficiently sophisticated and compatible information systems and the fact that where such systems are in place, they generally cannot be linked. But efforts, both technical and legal, are under way to overcome these obstacles. Even so, some of the issues of health care quality will remain moving targets because of constant changes in the health care environment and in technology. The author closes with the hope that the various actors within the health care industry may coordinate their efforts in dealing with these issues.

78 FR 3921 - Proposed Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-17

... Specifications Combustion Engineering Plants.'' Specifically, the proposed change revises various TSs to add a... Technical Details TSTF-426, Revision 5, is applicable to all Combustion Engineering- designed nuclear power...

Bibliography of Lewis Research Center technical publications announced in 1992

NASA Technical Reports Server (NTRS)

1993-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1992. All the publications were announced in the 1992 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center Technical Publications announced in 1991

NASA Technical Reports Server (NTRS)

1992-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific engineering work performed and managed by the Lewis Research Center in 1991. All the publications were announced in the 1991 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1993

NASA Technical Reports Server (NTRS)

1994-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1993. All the publications were announced in the 1993 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Private Technical and Vocational Education in Sub-Saharan Africa: Provision Patterns and Policy Issues. New Trends in Technical and Vocational Education.

ERIC Educational Resources Information Center

Atchoarena, David; Esquieu, Paul

The private provision trend in technical and vocational education (TVE) in sub-Saharan Africa occurred as the deterioration of state-run TVE systems in the region created a market niche for private providers. While advocates of deregulation believe the adoption of market principles in TVE will lead to greater efficiency and effectiveness, private…

Bibliography of Lewis Research Center technical publications announced in 1990

NASA Technical Reports Server (NTRS)

1991-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1990. All the publications were announced in the 1990 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1977

NASA Technical Reports Server (NTRS)

1978-01-01

This compilation of abstracts describes and indexes over 780 technical reports resulting from the scientific and engineering work performed and managed by the Lewis Research Center in 1977. All the publications were announced in the 1977 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Documents cited include research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1985

NASA Technical Reports Server (NTRS)

1986-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1985. All the publications were announced in the 1985 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1987

NASA Technical Reports Server (NTRS)

1988-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1987. All the publications were announced in the 1987 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1989

NASA Technical Reports Server (NTRS)

1990-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1989. All the publications were announced in the 1989 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1983

NASA Technical Reports Server (NTRS)

1984-01-01

This compilation of abstracts describes and indexes over 800 technical publications that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1983. Announced in the 1983 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts), the documents cited include research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1984

NASA Technical Reports Server (NTRS)

1985-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1984. All the publications were announced in the 1984 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1986

NASA Technical Reports Server (NTRS)

1987-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1986. All the publications were announced in the 1986 issues of Scientific and Technical Aerospace Reports (STAR) and/or International Aerospace Abstracts (IAA). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Considerations in establishing a post-mortem brain and tissue bank for the study of myalgic encephalomyelitis/chronic fatigue syndrome: a proposed protocol.

PubMed

Nacul, Luis; O'Donovan, Dominic G; Lacerda, Eliana M; Gveric, Djordje; Goldring, Kirstin; Hall, Alison; Bowman, Erinna; Pheby, Derek

2014-06-18

Our aim, having previously investigated through a qualitative study involving extensive discussions with experts and patients the issues involved in establishing and maintaining a disease specific brain and tissue bank for myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS), was to develop a protocol for a UK ME/CFS repository of high quality human tissue from well characterised subjects with ME/CFS and controls suitable for a broad range of research applications. This would involve a specific donor program coupled with rapid tissue collection and processing, supplemented by comprehensive prospectively collected clinical, laboratory and self-assessment data from cases and controls. We reviewed the operations of existing tissue banks from published literature and from their internal protocols and standard operating procedures (SOPs). On this basis, we developed the protocol presented here, which was designed to meet high technical and ethical standards and legal requirements and was based on recommendations of the MRC UK Brain Banks Network. The facility would be most efficient and cost-effective if incorporated into an existing tissue bank. Tissue collection would be rapid and follow robust protocols to ensure preservation sufficient for a wide range of research uses. A central tissue bank would have resources both for wide-scale donor recruitment and rapid response to donor death for prompt harvesting and processing of tissue. An ME/CFS brain and tissue bank could be established using this protocol. Success would depend on careful consideration of logistic, technical, legal and ethical issues, continuous consultation with patients and the donor population, and a sustainable model of funding ideally involving research councils, health services, and patient charities. This initiative could revolutionise the understanding of this still poorly-understood disease and enhance development of diagnostic biomarkers and treatments.

Independent assessment of laser power beaming options

NASA Technical Reports Server (NTRS)

Ponikvar, Donald R.

1992-01-01

Technical and architectural issues facing a laser power beaming system are discussed. Issues regarding the laser device, optics, beam control, propagation, and lunar site are examined. Environmental and health physics aspects are considered.

Technical Solutions to Common Indoor Air Quality Issues in Schools

EPA Pesticide Factsheets

Indoor Air Quality (IAQ) Design Tools for Schools provides voluntary guidance for school personnel, architects, engineers, builders and contractors, parents, and the community on key school construction and renovation issues.

Exoskeletons for industrial application and their potential effects on physical work load.

PubMed

de Looze, Michiel P; Bosch, Tim; Krause, Frank; Stadler, Konrad S; O'Sullivan, Leonard W

2016-05-01

The aim of this review was to provide an overview of assistive exoskeletons that have specifically been developed for industrial purposes and to assess the potential effect of these exoskeletons on reduction of physical loading on the body. The search resulted in 40 papers describing 26 different industrial exoskeletons, of which 19 were active (actuated) and 7 were passive (non-actuated). For 13 exoskeletons, the effect on physical loading has been evaluated, mainly in terms of muscle activity. All passive exoskeletons retrieved were aimed to support the low back. Ten-forty per cent reductions in back muscle activity during dynamic lifting and static holding have been reported. Both lower body, trunk and upper body regions could benefit from active exoskeletons. Muscle activity reductions up to 80% have been reported as an effect of active exoskeletons. Exoskeletons have the potential to considerably reduce the underlying factors associated with work-related musculoskeletal injury. Practitioner Summary: Worldwide, a significant interest in industrial exoskeletons does exist, but a lack of specific safety standards and several technical issues hinder mainstay practical use of exoskeletons in industry. Specific issues include discomfort (for passive and active exoskeletons), weight of device, alignment with human anatomy and kinematics, and detection of human intention to enable smooth movement (for active exoskeletons).

Oral health in the agenda of priorities in public health

PubMed Central

Antunes, José Leopoldo Ferreira; Toporcov, Tatiana Natasha; Bastos, João Luiz; Frazão, Paulo; Narvai, Paulo Capel; Peres, Marco Aurélio

2016-01-01

ABSTRACT This study describes the scientific production on oral health diffused in Revista de Saúde Pública, in the 50 years of its publication. A narrative review study was carried out using PubMed, as it is the search database that indexes all issues of the journal. From 1967 to 2015, 162 manuscripts specifically focused on oral health themes were published. This theme was present in all volumes of the journal, with increasing participation over the years. Dental caries was the most studied theme, constantly present in the journal since its first issue. Periodontal disease, fluorosis, malocclusions, and other themes emerged even before the decline of dental caries indicators. Oral health policy is the most recurring theme in the last two decades. Revista de Saúde Pública has been an important vehicle for dissemination, communication, and reflection on oral health, contributing in a relevant way to the technical-scientific interaction between professionals in this field. PMID:27598787

Metropolitian area network services comprised of virtual local area networks running over hybrid fiber-coax and asynchronous transfer mode technologies

NASA Astrophysics Data System (ADS)

Biedron, William S.

1995-11-01

Since 1990 there has been a rapid increase in the demand for communication services, especially local and wide area network (LAN/WAN) oriented services. With the introduction of the DFB laser transmitter, hybrid-fiber-coax (HFC) cable plant designs, ATM transport technologies and rf modems, new LAN/WAN services can now be defined and marketed to residential and business customers over existing cable TV systems. The term metropolitan area network (MAN) can be used to describe this overall network. This paper discusses the technical components needed to provision these services as well as provides some perspectives on integration issues. Architecture at the headend and in the backbone is discussed, as well as specific service definitions and the technology issues associated with each. The TCP/IP protocol is suggested as a primary protocol to be used throughout the MAN.

Accidental versus operational oil spills from shipping in the Baltic Sea: risk governance and management strategies.

PubMed

Hassler, Björn

2011-03-01

Marine governance of oil transportation is complex. Due to difficulties in effectively monitoring procedures on vessels en voyage, incentives to save costs by not following established regulations on issues such as cleaning of tanks, crew size, and safe navigation may be substantial. The issue of problem structure is placed in focus, that is, to what degree the specific characteristics and complexity of intentional versus accidental oil spill risks affect institutional responses. It is shown that whereas the risk of accidental oil spills primarily has been met by technical requirements on the vessels in combination with Port State control, attempts have been made to curb intentional pollution by for example increased surveillance and smart governance mechanisms such as the No-Special-Fee system. It is suggested that environmental safety could be improved by increased use of smart governance mechanisms tightly adapted to key actors' incentives to alter behavior in preferable directions.

Team-Centered Perspective for Adaptive Automation Design

NASA Technical Reports Server (NTRS)

Prinzel, Lawrence J., III

2003-01-01

Automation represents a very active area of human factors research. The journal, Human Factors, published a special issue on automation in 1985. Since then, hundreds of scientific studies have been published examining the nature of automation and its interaction with human performance. However, despite a dramatic increase in research investigating human factors issues in aviation automation, there remain areas that need further exploration. This NASA Technical Memorandum describes a new area of automation design and research, called adaptive automation. It discusses the concepts and outlines the human factors issues associated with the new method of adaptive function allocation. The primary focus is on human-centered design, and specifically on ensuring that adaptive automation is from a team-centered perspective. The document shows that adaptive automation has many human factors issues common to traditional automation design. Much like the introduction of other new technologies and paradigm shifts, adaptive automation presents an opportunity to remediate current problems but poses new ones for human-automation interaction in aerospace operations. The review here is intended to communicate the philosophical perspective and direction of adaptive automation research conducted under the Aerospace Operations Systems (AOS), Physiological and Psychological Stressors and Factors (PPSF) project.

Workforce Education: Issues for the New Century.

ERIC Educational Resources Information Center

Pautler, Albert J., Jr.

This paper is intended to guide small groups of vocational educators in discussions regarding work force education issues for the next century. The following work force issues are suggested: the aging work force; vocational education's role in reforming K-12 education; distance education for technical education programs; the labor shortages…

77 FR 58870 - Meeting of the CJIS Advisory Policy Board

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-24

... policy issues and appropriate technical and operational issues related to the programs administered by... with approval of the Designated Federal Officer (DFO). Any member of the public may file a written statement with the Board. Written comments shall be focused on the APB's current issues under discussion and...

Systems Engineering

NASA Technical Reports Server (NTRS)

Pellerano, Fernando

2015-01-01

This short course provides information on what systems engineering is and how the systems engineer guides requirements, interfaces with the discipline leads, and resolves technical issues. There are many system-wide issues that either impact or are impacted by the thermal subsystem. This course will introduce these issues and illustrate them with real life examples.

Feasibility of Retrofitting Lifts on Commuter and Light Rail Vehicles

DOT National Transportation Integrated Search

1980-09-01

The objectives of this study were to determine if lift retrofit applications to rail vehicles are technically feasible, and if so, the extent to which existing bus lift technology can be utilized. This report examines some of the technical issues ass...

Technician Education Yearbook 1984.

ERIC Educational Resources Information Center

Prakken Publications, Inc., Ann Arbor, MI.

This yearbook deals with technician education. Included in a section on new issues, problems, and proposals for technician education are the following papers: "High Technology Challenges the Vocational-Technical Curriculum," by Walter J. Brooking; "Assessment of Technical Competency," by Gordon C. McMahon; "Industry and Education Cooperation…

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Section 811.107 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS COMPETITION AND... requests for proposals for technical medical and other technical equipment and devices issued by a field facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not...

Barriers to the increased utilization of coal combustion/desulfurization by-products by government and commercial sectors - Update 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pflughoeft-Hassett, D.F.; Sondreal, E.A.; Steadman, E.N.

The following conclusions are drawn from the information presented in this report: (1) Joint efforts by industry and government focused on meeting RTC recommendations for reduction/removal of barriers have met with some success. The most notable of these are the changes in regulations related to CCB utilization by individual states. Regionally or nationally consistent state regulation of CCB utilization would further reduce regulatory barriers. (2) Technology changes will continue to be driven by the CAAA, and emission control technologies are expected to continue to impact the type and properties of CCBs generated. As a result, continued RD and D willmore » be needed to learn how to utilize new and changing CCBs in environmentally safe, technically sound, and economically advantageous ways. Clean coal technology CCBs offer a new challenge because of the high volumes expected to be generated and the different characteristics of these CCBs compared to those of conventional CCBs. (3) Industry and government have developed the RD and D infrastructure to address the technical aspects of developing and testing new CCB utilization applications, but this work as well as constant quality control/quality assurance testing needs to be continued to address both industry wide issues and issues related to specific materials, regions, or users. (4) Concerns raised by environmental groups and the public will continue to provide environmental and technical challenges to the CCB industry. It is anticipated that the use of CCBs in mining applications, agriculture, structural fills, and other land applications will continue to be controversial and will require case-by-case technical and environmental information to be developed. The best use of this information will be in the development of generic regulations specifically addressing the use of CCBs in these different types of CCB applications. (5) The development of federal procurement guidelines under Executive Order 12873 titled ''Federal Acquisition, Recycling and Waste Prevention,'' in October 1993 was a positive step toward getting CCBs accepted in the marketplace. Industry needs to continue to work with EPA to develop additional procurement guidelines for products containing CCBs--and to take advantage of existing guidelines to encourage the use of CCBs in high-profile projects. (6) Accelerated progress toward increased utilization of CCBs can be made only if there is an increased financial commitment and technical effort by industry and government. The framework for this has been set by the successful cooperation of industry and government under DOE leadership. Cooperation should continue, with DOE fulfilling its lead role established in the RTC. It is clear that the RTC recommendations continue to have validity with respect to increasing CCB utilization and continue to provide guidance to industry and government agencies.« less

Task-specific singing dystonia: vocal instability that technique cannot fix.

PubMed

Halstead, Lucinda A; McBroom, Deanna M; Bonilha, Heather Shaw

2015-01-01

Singer's dystonia is a rare variation of focal laryngeal dystonia presenting only during specific tasks in the singing voice. It is underdiagnosed since it is commonly attributed to technique problems including increased muscle tension, register transition, or wobble. Singer's dystonia differs from technique-related issues in that it is task- and/or pitch-specific, reproducible and occurs independently from the previously mentioned technical issues.This case series compares and contrasts profiles of four patients with singer's dystonia to increase our knowledge of this disorder. This retrospective case series includes a detailed case history, results of singing evaluations from individual voice teachers, review of singing voice samples by a singing voice specialist, evaluation by a laryngologist with endoscopy and laryngeal electromyography (LEMG), and spectral analysis of the voice samples by a speech-language pathologist. Results demonstrate the similarities and unique differences of individuals with singer's dystonia. Response to treatment and singing status varied from nearly complete relief of symptoms with botulinum toxin injections to minor relief of symptoms and discontinuation of singing. The following are the conclusions from this case series: (1) singer's dystonia exists as a separate entity from technique issues, (2) singer's dystonia is consistent with other focal task-specific dystonias found in musicians, (3) correctly diagnosing singer's dystonia allows singer's access to medical treatment of dystonia and an opportunity to modify their singing repertoire to continue singing with the voice they have, and (4) diagnosis of singer's dystonia requires careful sequential multidisciplinary evaluation to isolate the instability and confirm dystonia by LEMG and spectral voice analysis. Copyright © 2015 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

TWRS vadose zone contamination issue expert panel report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shafer, D.S.

1997-05-01

When members were first canvassed for participation in the Vadose Zone Expert Panel the stated purpose for convening the Panel was to review a controversial draft report, the SX Tank Farm Report. This report was produced by a DOE Grand Junction Project Office (GJPO) contractor, RUST Geotech, now MACTEC-ERS, for the DOE Richland Office (DOERL). Three meetings were planned for June, July and August, 1995 to review the draft report and to complete a Panel report by mid-September. The Expert Panel has found its efforts confounded by various non-technical issues. The Expert Panel has chosen to address some of themore » non-technical issues in this Preface rather than to dilute the technical discussion that follows in the body of this independent expert panel status report (Panel Report). Rather than performing a straightforward manuscript review, the Panel was asked to resolve conflicting interpretations of gamma-ray logging measurements performed in vadose zone boreholes (drywells) surrounding the high-level radioactive wastes of the SX tank farm. There are numerous and complex technical issues that must be evaluated before the vertical and radial extent of contaminant migration at the SX tank farm can be accurately assessed. When the Panel first met in early June, 1996, it quickly became apparent that the scientific and technical issues were obscured by policy and institutional affairs which have polarized discussion among various segments of the Hanford organization. This situation reflects the kinds of institutional problems described separately in reports by the National Research Council of the National Academy of Sciences (NAS/NRC), The Hanford Tanks Environmental Impacts and Policy Choices and BmTiers to Science: Technical Management of the Department of Energy Environmental Remediation Program. The Vadose Zone Characterization Program, appears to be caught between conflicting pressures and organizational mandates, some imposed from outside DOE-RL and some self-imposed. The institutional problems they encountered include having both Tank Waste Remediation System (TWRS), the parent organization of the Vadose Zone Characterization Program and Environmental Restoration (ER), each under different regulatory controls and different organizational units, seeking to defend the status quo and discount many of the Panel`s conclusions and recommendations. The results presented in the SX Tank Farm Report, especially the visualizations, have created concern in the public sector, both on a local, personal level and on a national political level.« less

Housing, health and master planning: rules of engagement.

PubMed

Harris, P; Haigh, F; Thornell, M; Molloy, L; Sainsbury, P

2014-04-01

Knowledge about health focussed policy collaboration to date has been either tactical or technical. This article focusses on both technical and tactical issues to describe the experience of cross-sectoral collaboration between health and housing stakeholders across the life of a housing master plan, including but not limited to a health impact assessment (HIA). A single explanatory case study of collaboration on a master plan to regenerate a deprived housing estate in Western Sydney was developed to explain why and how the collaboration worked or did not work. Data collection included stakeholder interviews, document review, and reflections by the health team. Following a realist approach, data was analysed against established public policy theory dimensions. Tactically we did not know what we were doing. Despite our technical knowledge and skills with health focussed processes, particularly HIA, we failed to appreciate complexities inherent in master planning. This limited our ability to provide information at the right points. Eventually however the HIA did provide substantive connections between the master plan and health. We use our analysis to develop technical and tactical rules of engagement for future cross-sectoral collaboration. This case study from the field provides insight for future health focussed policy collaboration. We demonstrate the technical and tactical requirements for future intersectoral policy and planning collaborations, including HIAs, with the housing sector on master planning. The experience also suggested how HIAs can be conducted flexibly alongside policy development rather than at a specific point after a policy is drafted. Copyright © 2014 The Royal Society for Public Health. All rights reserved.

Effecting Organizational Change at the Macro Level of Professions

NASA Astrophysics Data System (ADS)

Green, Robert Anthony

Much has been written in academic and popular publications about organizational change. Topics have ranged from case studies to anecdotal stories of how leaders can change an organization. There is little written on changing the culture and vision of a profession at the macro level. This dissertation shows that one key to effecting change within a profession is to educate those at the entrant level and thereby effect change with the profession. Over time, these new entrants to the profession will rise to senior positions and be able to effect greater change through the hiring, training, and mentoring processes inherent in the professions and the organizations for which they work. One way to effect change in these entrants is through education in college and professional schools. This study is specifically focused on effecting change in the interdisciplinary field of engineering and public policy. Public policy involves countless infrastructure issues at all levels of government. Engineers are well-versed in dealing with the technical issues of infrastructure but their voice is often lacking at the policy level. Similarly, political scientists are well-versed in policy but are often lacking in a thorough understanding of the technical aspects of the policy. Through an introductory course in engineering and public policy, undergraduate students from the seemingly disparate fields of engineering and political science were placed in a common classroom and through lectures, writings, presentations, and guided discussions their attitudes on key areas were changed. Areas studied were professional interest, legitimacy, deference, the public policy process, and education outside of a specific field. Through the process of education, changes in each of these areas was possible. Further, the movement was towards making students in each discipline more open to the input, opinions, and attitudes of others, and specifically in shifting engineers toward a more positive view of the public policy process. Being exposed to these topics and to each other's thought processes, changes in professional attitudes were made. While there is not a specific profession for which any research has been done, the military is used, in places, as an analog to the profession of engineering.

Mode Selection Techniques in Variable Mass Flexible Body Modeling

NASA Technical Reports Server (NTRS)

Quiocho, Leslie J.; Ghosh, Tushar K.; Frenkel, David; Huynh, An

2010-01-01

In developing a flexible body spacecraft simulation for the Launch Abort System of the Orion vehicle, when a rapid mass depletion takes place, the dynamics problem with time varying eigenmodes had to be addressed. Three different techniques were implemented, with different trade-offs made between performance and fidelity. A number of technical issues had to be solved in the process. This paper covers the background of the variable mass flexibility problem, the three approaches to simulating it, and the technical issues that were solved in formulating and implementing them.

Applicability of existing C3 (command, control and communications) vulnerability and hardness analyses to sentry system issues. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, R.C.

1983-01-13

This report is a compilation of abstracts resulting from a literature search of reports relevant to Sentry Ballistic missile system C3 vulnerability and hardness. Primary sources consulted were the DOD Nuclear Information Analysis Center (DASIAC) and the Defense Technical Information Center (DTIC). Approximately 175 reports were reviewed and abstracted, including several related to computer programs for estimating nuclear effects on electromagnetic propagation. The reports surveyed were ranked in terms of their importance for Sentry C3 VandH issues.

"Technical note. Harmonization of the multi-scale multi-model activities HTAP, AQMEII and MICS-Asia: simulations, emission inventories, boundary conditions and output formats." For submission to ACP Special Issue on "Global and regional assessment of intercontinental transport of air pollution: results from HTAP, AQMEII and MICS"

EPA Science Inventory

The ACP Special Issue is being organized to draw together analysis of a set of cooperative modeling experiments (referred to as HTAP2). The purpose of this technical note is to provide a common description of the experimental design and set up for HTAP2 that can be referred to b...

Practical lessons in remote connectivity.

PubMed Central

Kouroubali, A.; Starren, J.; Barrows, R. C.; Clayton, P. D.

1997-01-01

Community Health Information Networks (CHINs) require the ability to provide computer network connections to many remote sites. During the implementation of the Washington Heights and Inwood Community Health Management Information System (WHICHIS) at the Columbia-Presbyterian Medical Center (CPMC), a number of remote connectivity issues have been encountered. Both technical and non-technical issues were significant during the installation. We developed a work-flow model for this process which may be helpful to any health care institution attempting to provide seamless remote connectivity. This model is presented and implementation lessons are discussed. PMID:9357643

Extending systems ergonomics thinking to accommodate the socio-technical issues of Systems of Systems.

PubMed

Siemieniuch, C E; Sinclair, M A

2014-01-01

Socio-technical issues for Systems of Systems (SoS) differ in several ways from those for systems, mainly because the individual systems that are components of the SoS are usually owned by different organisations, each responsible for the optimisation and operation of its own system. Consequently, management of the SoS is about negotiation and management of the interfaces. Because of issues of Intellectual Property Rights (IPRs), commercial confidence, and the like, there is seldom sufficient, timely information in circulation about the SoS. Surprises are endemic to SoS, and resilience is a fundamental requirement. This paper outlines the different characteristics of SoS compared to ordinary systems, discusses many of the socio-technical issues involved, and then outlines a generic approach to these issues, treating the SoS as a 'wicked problem'. Endemic to this is the need for governance, which is discussed briefly. This is followed by a description of the evident gaps in knowledge about the functioning of SoS, and a listing of tool classes, the development of which would enable progress to be made more effectively. Finally, the paper discusses how the SoS approach might be the best way to entrain ICT to address global drivers, thus pointing to the importance of the SoS approach. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Tools don't-and won't-make the man: A cognitive look at the future.

PubMed

Osiurak, François; Navarro, Jordan; Reynaud, Emanuelle; Thomas, Gauthier

2018-05-01

The question of whether tools erase cognitive and physical interindividual differences has been surprisingly overlooked in the literature. Yet if technology is profusely available in a near or far future, will we be equal in our capacity to use it? We sought to address this unexplored, fundamental issue, asking 200 participants to perform 3 physical (e.g., fine manipulation) and 3 cognitive tasks (e.g., calculation) in both non-tool-use and tool-use conditions. Here we show that tools do not erase but rather extend our intrinsic physical and cognitive skills. Moreover, this phenomenon of extension is task specific because we found no evidence for superusers, benefitting from the use of a tool irrespective of the task concerned. These results challenge the possibility that technical solutions could always be found to make people equal. Rather, technical innovation might be systematically limited by the user's initial degree of knowledge or skills for a given task. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Vulnerabilities in GSM technology and feasibility of selected attacks

NASA Astrophysics Data System (ADS)

Voznak, M.; Prokes, M.; Sevcik, L.; Frnda, J.; Toral-Cruz, Homer; Jakovlev, Sergej; Fazio, Peppino; Mehic, M.; Mikulec, M.

2015-05-01

Global System for Mobile communication (GSM) is the most widespread technology for mobile communications in the world and serving over 7 billion users. Since first publication of system documentation there has been notified a potential safety problem's occurrence. Selected types of attacks, based on the analysis of the technical feasibility and the degree of risk of these weaknesses, were implemented and demonstrated in laboratory of the VSB-Technical University of Ostrava, Czech Republic. These vulnerabilities were analyzed and afterwards possible attacks were described. These attacks were implemented using open-source tools, software programmable radio USRP (Universal Software RadioPeripheral) and DVB-T (Digital Video Broadcasting - Terrestrial) receiver. GSM security architecture is being scrutinized since first public releases of its specification mainly pointing out weaknesses in authentication and ciphering mechanisms. This contribution also summarizes practically proofed and used scenarios that are performed using opensource software tools and variety of scripts mostly written in Python. Main goal of this paper is in analyzing security issues in GSM network and practical demonstration of selected attacks.

Community-Based Participatory Initiatives to Increase Breastfeeding Rates in Indiana.

PubMed

Friesen, Carol A; Hormuth, Laura J; Cardarelli, Tina L

2015-11-01

In 2012, the Centers for Disease Control and Prevention awarded the Indiana State Department of Health funding for breastfeeding activities. The grant, issued in part in response to the 2011 Surgeon General's Call to Action to Support Breastfeeding, focused on providing funding and technical support to small community-based organizations to address challenges encountered by breastfeeding mothers. Indiana used the funds to develop the Community Breastfeeding Support Initiative (CBSI). The goal was to provide funding and technical support to small community-based organizations to carry out self-selected projects in their communities. The 13 CBSI programs served 1345 individual clients (n = 3664 visits) during the 9-month period. This article provides valuable information about collaboration at the state level and the supporting infrastructure in place to carry out this project. Our findings about the number of clients served, number of visits, community-specific programs and activities, and lessons learned can be used by other organizations as they plan breastfeeding support programs for their community. © The Author(s) 2015.

The impact of marijuana policies on youth: clinical, research, and legal update.

PubMed

Ammerman, Seth; Ryan, Sheryl; Adelman, William P

2015-03-01

This technical report updates the 2004 American Academy of Pediatrics technical report on the legalization of marijuana. Current epidemiology of marijuana use is presented, as are definitions and biology of marijuana compounds, side effects of marijuana use, and effects of use on adolescent brain development. Issues concerning medical marijuana specifically are also addressed. Concerning legalization of marijuana, 4 different approaches in the United States are discussed: legalization of marijuana solely for medical purposes, decriminalization of recreational use of marijuana, legalization of recreational use of marijuana, and criminal prosecution of recreational (and medical) use of marijuana. These approaches are compared, and the latest available data are presented to aid in forming public policy. The effects on youth of criminal penalties for marijuana use and possession are also addressed, as are the effects or potential effects of the other 3 policy approaches on adolescent marijuana use. Recommendations are included in the accompanying policy statement. Copyright © 2015 by the American Academy of Pediatrics.

FMEA: a model for reducing medical errors.

PubMed

Chiozza, Maria Laura; Ponzetti, Clemente

2009-06-01

Patient safety is a management issue, in view of the fact that clinical risk management has become an important part of hospital management. Failure Mode and Effect Analysis (FMEA) is a proactive technique for error detection and reduction, firstly introduced within the aerospace industry in the 1960s. Early applications in the health care industry dating back to the 1990s included critical systems in the development and manufacture of drugs and in the prevention of medication errors in hospitals. In 2008, the Technical Committee of the International Organization for Standardization (ISO), licensed a technical specification for medical laboratories suggesting FMEA as a method for prospective risk analysis of high-risk processes. Here we describe the main steps of the FMEA process and review data available on the application of this technique to laboratory medicine. A significant reduction of the risk priority number (RPN) was obtained when applying FMEA to blood cross-matching, to clinical chemistry analytes, as well as to point-of-care testing (POCT).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neumann, Scott; Britton, Jay; Devos, Arnold N.

There are many uses for the Common Information Model (CIM), an ontology that is being standardized through Technical Committee 57 of the International Electrotechnical Commission (IEC TC57). The most common uses to date have included application modeling, information exchanges, information management and systems integration. As one should expect, there are many issues that become apparent when the CIM ontology is applied to any one use. Some of these issues are shortcomings within the current draft of the CIM, and others are a consequence of the different ways in which the CIM can be applied using different technologies. As the CIMmore » ontology will and should evolve, there are several dangers that need to be recognized. One is overall consistency and impact upon applications when extending the CIM for a specific need. Another is that a tight coupling of the CIM to specific technologies could limit the value of the CIM in the longer term as an ontology, which becomes a larger issue over time as new technologies emerge. The integration of systems is one specific area of interest for application of the CIM ontology. This is an area dominated by the use of XML for the definition of messages. While this is certainly true when using Enterprise Application Integration (EAI) products, it is even more true with the movement towards the use of Web Services (WS), Service-Oriented Architectures (SOA) and Enterprise Service Buses (ESB) for integration. This general IT industry trend is consistent with trends seen within the IEC TC57 scope of power system management and associated information exchange. The challenge for TC57 is how to best leverage the CIM ontology using the various XML technologies and standards for integration. This paper will provide examples of how the CIM ontology is used and describe some specific issues that should be addressed within the CIM in order to increase its usefulness as an ontology. It will also describe some of the issues and challenges that will be faced as the CIM ontology is leveraged for integration purposes by IEC TC57 standards.« less

IVHS institutional issues and case studies : ADVANCE case study

DOT National Transportation Integrated Search

1994-04-01

This operational test case study is one of six performed in response to a Volpe National Transportation Systems Center technical task directive (TTD) to Science Applications International Corporation (SAIC) entitled, IVHS Institutional Issues and ...

Going national with HERS and EEMs: Issues and impacts. The collected papers of the national collaborative

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This collection of papers is a companion volume to A National Program for Energy-Efficient Mortgages and Home Energy Rating Systems: A Blueprint for Action (NREL/TP-261-4677). The Blueprint reports the findings and recommendations of the National Collaborative on Home Energy Rating Systems and Mortgage Incentives for Energy Efficiency about a voluntary national program linking energy-efficient mortgages and home energy rating systems. This volume provides technical documentation for A Blueprint for Action. It consists of 55 technical issue papers and 13 special papers prepared by the technical advisory committees and some members of the Collaborative Consensus Committee of the National Collaborative. Itmore » also contains the bibliography and the glossary written by the members and staff of the National Collaborative.« less

Ethics and Epistemology in Big Data Research.

PubMed

Lipworth, Wendy; Mason, Paul H; Kerridge, Ian; Ioannidis, John P A

2017-12-01

Biomedical innovation and translation are increasingly emphasizing research using "big data." The hope is that big data methods will both speed up research and make its results more applicable to "real-world" patients and health services. While big data research has been embraced by scientists, politicians, industry, and the public, numerous ethical, organizational, and technical/methodological concerns have also been raised. With respect to technical and methodological concerns, there is a view that these will be resolved through sophisticated information technologies, predictive algorithms, and data analysis techniques. While such advances will likely go some way towards resolving technical and methodological issues, we believe that the epistemological issues raised by big data research have important ethical implications and raise questions about the very possibility of big data research achieving its goals.

7 CFR 3401.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Director who is responsible for the scientific and technical direction of the project. (d) Grantee means... Department to whom the authority to issue or modify research project grant instruments has been delegated. (j... experience in particular scientific or technical fields to give expert advice, in accordance with the...

7 CFR 3415.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... scientific or technical fields to render special expert advice, through written evaluations of grant applications, in accordance with the provisions of this part, on the scientific or technical merit of grant... employee of the Department to whom the authority to issue or modify grant instruments has been delegated...

7 CFR 3415.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... scientific or technical fields to render special expert advice, through written evaluations of grant applications, in accordance with the provisions of this part, on the scientific or technical merit of grant... employee of the Department to whom the authority to issue or modify grant instruments has been delegated...

7 CFR 3401.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Director who is responsible for the scientific and technical direction of the project. (d) Grantee means... Department to whom the authority to issue or modify research project grant instruments has been delegated. (j... experience in particular scientific or technical fields to give expert advice, in accordance with the...

7 CFR 3415.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... scientific or technical fields to render special expert advice, through written evaluations of grant applications, in accordance with the provisions of this part, on the scientific or technical merit of grant... employee of the Department to whom the authority to issue or modify grant instruments has been delegated...

7 CFR 3401.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Director who is responsible for the scientific and technical direction of the project. (d) Grantee means... Department to whom the authority to issue or modify research project grant instruments has been delegated. (j... experience in particular scientific or technical fields to give expert advice, in accordance with the...

Ceramic High Efficiency Particulate Air (HEPA) Filter Final Report CRADA No. TC02160.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitchell, M.; Bergman, W.

2017-08-25

The technical objective of this project was to develop a ceramic HEPA filter technology, by initially producing and testing coupon ceramics, small scale prototypes, and full scale prototype HEPA filters, and to address relevant manufacturing and commercialization technical issues.

An approach to knowledge structuring for advanced phases of the Technical and Management Information System (TMIS)

NASA Technical Reports Server (NTRS)

Goranson, H. T.

1986-01-01

The Technical and Management Information System (TMIS) must employ on enlightened approach to its object structure, but basic issues in conceptual structuring remain to be resolved. Sirius outlines the necessary agenda and reports on progress toward solutions.

Site Characterization and Monitoring Technical Support Center FY16 Report

EPA Science Inventory

SCMTSC’s primary goal is to provide technical assistance to regional programs on complex hazardous waste site characterization issues. This annual report illustrates the range and extent of projects that SCMTSC supported in FY 2016. Our principal audiences are site project manage...

40 CFR 35.970 - Contract enforcement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... authorized to provide technical and legal assistance in the administration and enforcement of any contract... matters at issue. (b) Grantee request. The grantee's request for technical or legal assistance should be submitted in writing and be accompained by documentation adequate to inform the Regional Administrator of...

77 FR 3766 - Southwestern Gas Storage Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... Storage Technical Conference Notice of Public Conference On December 13, 2011, the Secretary issued formal... related to natural gas storage development in the southwestern United States, to be held at the Radisson... to speak from numerous individuals representing diverse interests associated with storage development...

78 FR 68357 - Airworthiness Directives; Aermacchi S.p.A. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-14

... with a Lycoming O-540 wide cylinder flange engine with a front crankcase mounted propeller governor... Societa Finmeccanica has issued Mandatory Bollettino Tecnico (English Translation: Technical Bulletin) No... Mandatory Bollettino Tecnico (English Translation: Technical Bulletin) No. 260SB-136, Revision 1, dated...

75 FR 71526 - Corporate Credit Unions, Technical Corrections

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-24

... NATIONAL CREDIT UNION ADMINISTRATION 12 CFR Part 704 RIN 3133-AD58 Corporate Credit Unions... request for comments. SUMMARY: NCUA is issuing technical corrections to its corporate credit union rule... for submitting comments. NCUA Web site: http://www.ncua.gov/Resources/RegulationsOpinionsLaws/Proposed...

77 FR 8095 - Technical Corrections to Commission Regulations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-14

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission 18 CFR Part 2 [Docket No. RM11-30-000; Order No. 756] Technical Corrections to Commission Regulations Issued February 8, 2012. AGENCY: Federal Energy Regulatory Commission, DOE. ACTION: Final rule: correcting amendment. SUMMARY: This document adds...

76 FR 54510 - Notice of Availability of Proposed Models for Plant-Specific Adoption of Technical Specifications...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-01

... Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-500, Revision 2... Specifications Task Force (TSTF) Traveler TSTF- 500, Revision 2, ``DC Electrical Rewrite--Update to TSTF-360....8.6, ``Battery Cell Parameters.'' Additionally, a new Administrative Controls program, titled...

Diagnostics of Technical Condition of Gear Units of Belt Conveyors for the Aggregate of Methods of Nondestructive Testing

NASA Astrophysics Data System (ADS)

Kuzin, Evgeny G.; Gerike, Boris L.; Drozdenko, Yuriy V.; Lupiy, Michael G.; Grigoryeva, Natalya V.

2017-10-01

The article reviews the issues of complex use of methods of technical diagnostics of gearboxes for belt conveyors, with the aim of creating an effective system of maintenance. The article is showing the results of the evaluation of the technical condition of the drives of belt conveyors based on vibration monitoring and thermal parameters, and analysis of lubricating oil.

Technical aspects of cardiac PET/MRI.

PubMed

Masuda, Atsuro; Nemoto, Ayaka; Takeishi, Yasuchika

2018-06-01

PET/MRI is a novel modality that enables to combine PET and MR images, and has significant potential to evaluate various cardiac diseases through the combination of PET molecular imaging and MRI functional imaging. Precise management of technical issues, however, is necessary for cardiac PET/MRI. This article describes several technical points, including patient preparation, MR attenuation correction, parallel acquisition of PET with MRI, clinical aspects, and image quality control.

Non-technical skills training to enhance patient safety.

PubMed

Gordon, Morris

2013-06-01

  Patient safety is an increasingly recognised issue in health care. Systems-based and organisational methods of quality improvement, as well as education focusing on key clinical areas, are common, but there are few reports of educational interventions that focus on non-technical skills to address human factor sources of error. A flexible model for non-technical skills training for health care professionals has been designed based on the best available evidence, and with sound theoretical foundations.   Educational sessions to improve non-technical skills in health care have been described before. The descriptions lack the details to allow educators to replicate and innovate further.   A non-technical skills training course that can be delivered as either a half- or full-day intervention has been designed and delivered to a number of mixed groups of undergraduate medical students and doctors in postgraduate training. Participant satisfaction has been high and patient safety attitudes have improved post-intervention.   This non-technical skills educational intervention has been built on a sound evidence base, and is described so as to facilitate replication and dissemination. With the key themes laid out, clinical educators will be able to build interventions focused on numerous clinical issues that pay attention to human factor contributors to safety. © 2013 John Wiley & Sons Ltd.

NASA Engineering Excellence: A Case Study on Strengthening an Engineering Organization

NASA Technical Reports Server (NTRS)

Shivers, C. Herbert; Wessel, Vernon W.

2006-01-01

NASA implemented a system of technical authority following the Columbia Accident Investigation Board (CAE) report calling for independent technical authority to be exercised on the Space Shuttle Program activities via a virtual organization of personnel exercising specific technical authority responsibilities. After the current NASA Administrator reported for duty, and following the first of two planned "Shuttle Return to Flight" missions, the NASA Chief Engineer and the Administrator redirected the Independent Technical Authority to a program of Technical Excellence and Technical Authority exercised within the existing engineering organizations. This paper discusses the original implementation of technical authority and the transition to the new implementation of technical excellence, including specific measures aimed at improving safety of future Shuttle and space exploration flights.

A Review of Hydrogen/Halogen Flow Cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cho, Kyu Taek; Tucker, Michael C.; Weber, Adam Z.

Flow batteries provide an energy-storage solution for various grid-related stability and service issues that arise as renewable-energy-generation technologies are adopted. Among the most promising flow-battery systems are those using hydrogen/halogen redox couples, which promise the possibility of meeting the cost target of the US Department of Energy (DOE), due to their fast and reversible kinetics and low materials cost. However, significant critical issues and barriers for their adoption remain. In this review of halogen/hydrogen systems, technical and performance issues, and research and development progress are reviewed. The information in this review can be used as a technical guide for researchmore » and development of related redox-flow-battery systems and other electrochemical technologies.« less

Introduction to the special issue on the technical status of materials for a fusion reactor

NASA Astrophysics Data System (ADS)

Stork, D.; Zinkle, S. J.

2017-09-01

Materials determine in a fundamental way the performance and environmental attractiveness of a fusion reactor: through the size (power fluxes to the divertor, neutron fluxes to the first wall); economics (replacement lifetime of critical in-vessel components, thermodynamic efficiency through operating temperature etc); plasma performance (erosion by plasma fluxes to the divertor surfaces); robustness against off-normal accidents (safety); and the effects of post-operation radioactivity on waste disposal and maintenance. The major philosophies and methodologies used to formulate programmes for the development of fusion materials are outlined, as the basis for other articles in this special issue, which deal with the fundamental understanding of the issues regarding these materials and their technical status and prospects for development.

System Issues Related to Implementing on the Internet

NASA Technical Reports Server (NTRS)

Mackey, William; Bagg, Thomas C., III

1999-01-01

Implementing capabilities on the World Wide Web should never be taken lightly. A good systems engineer is able to examine such implementations from all points of view, including political, legal, security, access, technical deployment, and quality. The evacuation discussed in this paper was conducted to ensure that the National Aeronautics and Space Administration (NASA) was proceeding in a correct direction by implementing RECALL a Lessons Learned System on the Web and, subsequently, did so successfully. The systems approach extended well beyond technical implementation to several issue that are not often addressed by an implementation team. The resulting evaluation increased the team's sensitivity to such issues and, in fact, the authors believe that the evaluation provided as much benefit as the system itself.

A Review of Hydrogen/Halogen Flow Cells

DOE PAGES

Cho, Kyu Taek; Tucker, Michael C.; Weber, Adam Z.

2016-05-17

Flow batteries provide an energy-storage solution for various grid-related stability and service issues that arise as renewable-energy-generation technologies are adopted. Among the most promising flow-battery systems are those using hydrogen/halogen redox couples, which promise the possibility of meeting the cost target of the US Department of Energy (DOE), due to their fast and reversible kinetics and low materials cost. However, significant critical issues and barriers for their adoption remain. In this review of halogen/hydrogen systems, technical and performance issues, and research and development progress are reviewed. The information in this review can be used as a technical guide for researchmore » and development of related redox-flow-battery systems and other electrochemical technologies.« less

Index of NACA Technical Publications, 1949 - May, 1951

NASA Technical Reports Server (NTRS)

1952-01-01

The Preface to the Index of NACA Technical Publications, 1915-1949, mentioned that regular supplements would be issued in the future. This is the first such Supplement and covers those documents issued through May of 1951. Similar arrangement is used in both Indexes. First, there is a classified listing of the subject categories; second, a chronological listing of NACA publications under each subject category; third, an alphabetical index to the subject categories; and finally, an author index. The latter feature was not included in the basic 1915-1949 Index but has been issued separately and is available upon request. Immediately following this Preface is an Explanatory Chart of NACA Publications Series Designations which may be of use in identifying references to NACA documents encountered in the literature.

Technical aspects of pediatric epilepsy surgery: Report of a multicenter, multinational web-based survey by the ILAE Task Force on Pediatric Epilepsy Surgery.

PubMed

Cukiert, Arthur; Rydenhag, Bertil; Harkness, William; Cross, J Helen; Gaillard, William D

2016-02-01

Surgical techniques may vary extensively between centers. We report on a web-based survey aimed at evaluating the current technical approaches in different centers around the world performing epilepsy surgery in children. The intention of the survey was to establish technical standards. A request was made to 88 centers to complete a web-based survey comprising 51 questions. There were 14 questions related to general issues, 13 questions investigating the different technical aspects for children undergoing epilepsy surgery, and 24 questions investigating surgical strategies in pediatric epilepsy surgery. Fifty-two centers covering a wide geographic representation completed the questionnaire. The median number of resective procedures per center per year was 47. Some important technical practices appeared (>80% of the responses) such as the use of prophylactic antibiotics (98%), the use of high-speed drills for bone opening (88%), nonresorbable material for bone flap closure (85%), head fixation (90%), use of the surgical microscope (100%), and of free bone flaps. Other questions, such as the use of drains, electrocorticography (ECoG) and preoperative withdrawal of valproate, led to mixed, inconclusive results. Complications were noted in 3.8% of the patients submitted to cortical resection, 9.9% hemispheric surgery, 5% callosotomy, 1.8% depth electrode implantation, 5.9% subdural grids implantation, 11.9% hypothalamic hamartoma resection, 0.9% vagus nerve stimulation (VNS), and 0.5% deep brain stimulation. There were no major differences across regions or countries in any of the subitems above. The present data offer the first overview of the technical aspects of pediatric epilepsy surgery worldwide. Surprisingly, there seem to be more similarities than differences. That aside many of the evaluated issues should be examined by adequately designed multicenter randomized controlled trials (RCTs). Further knowledge on these technical issues might lead to increased standardization and lower costs in the future, as well as definitive practice guidelines. Wiley Periodicals, Inc. © 2016 International League Against Epilepsy.